WorldWideScience

Sample records for curves analisis numerico

  1. Numerical analysis of thermoluminescence glow curves; Analisis numerico de las cruvas de termoluminiscencia

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Ros, J M; Delgado, A

    1989-07-01

    This report presents a method for the numerical analysis of complex thermoluminescence glow curves resolving the individual glow peak components. The method employs first order kinetics analytical expressions and is based In a Marquart-Levenberg minimization procedure. A simplified version of this method for thermoluminescence dosimetry (TLD) is also described and specifically developed to operate whit Lithium Fluoride TLD-100. (Author). 36 refs.

  2. Numerical analysis of flow in a solar heater of air packing with shavings; Analisis numerico del flujo en un calentador solar de aire empacado con viruta

    Energy Technology Data Exchange (ETDEWEB)

    Lopez C, Raymundo; Morales G, Juan R; Diaz C, Alen; Lara V, Araceli; Lizardi R, Arturo [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D.F. (Mexico); Vaca M, Mabel [UNAM, Mexico, D.F. (Mexico)

    2000-07-01

    The temperature distribution of air through a solar heater is determined by means of the equations of heat, mass, momentum, and energy conservation. The solution is obtained by means of the numeric model of finite volume, using the CFC2000 software, V. 3.3. The studied flow is laminar. The temperature distribution resulted quite similar for different Reynolds numbers; the greatest difference was less than 4 Celsius degrees, for similar ranges of solar radiation. The influence of the separation that exists between the clear cover and the free surface of the material used as thermal summit (b) was analyzed. A difference up to 41 Celsius degrees for a Reynolds number of 1000 and values of b between 3 and 7 cm. For a Reynolds of 2000, the difference was of 29 Celsius degrees, in the same range of b. [Spanish] Se determinan la distribucion de temperaturas del aire, a lo largo de un calentador solar, aplicando las ecuaciones de conservacion de masa, cantidad de movimiento y energia. La solucion se obtiene con el modelo numerico de volumen finito y la utilizacion del programa de computadora llamado CFC2000 version 3.3. El flujo estudiado es del tipo laminar. La distribucion de temperaturas resulto ser muy semejante para diferentes valores del numero de Reynolds, la diferencia mayor resulto menor a 4 grados Celsius, para rangos similares de radiacion solar. Se analizo la influencia de la separacion que existe entre la cubierta transparente y la superficie libre del material que sirve como almacen termico (b). Se encontro una diferencia maxima de hasta 41 grados celsius para un numero de Reynolds de 1000 y los valores de b entre 3 y 7 cm. Cuando el Reynolds fue de 2000 la diferencia fue de 29 grados Celsius, en el mismo rango de b.

  3. Experimental-numerical analysis of the fracture mechanic in polymeric materials; Analisis numerico-experimental de la mecanica de la fractura en materiales polimeros

    Energy Technology Data Exchange (ETDEWEB)

    Beltran Fernandez, Juan Alfonso; Hernandez Gomez, Luis H; Urriolagoitia Calderon, Guillermo; Villa y Rabasa, Gabriel; Rodriguez, Gustavo Ricardo; Mendoza Nunez, Maribel A [Instituto Politecnico Nacional, Zacatenco (Mexico)

    2004-10-15

    In this piece of work some fracture testings on specimens with a lateral fracture are made to analyze the resultant stress state around of the tip of the fracture and the way in which the strength of the material is modified to get the fracture toughness, to the load mode I. Also, it is explained the way in which mechanic properties were got in the Polymetil-Methacylate, (PMMA), such as: modulus of elasticity, maximum tensile stress, yielding stress and stress-unitary strain, stress-rate and strain-rate curves, throughout of the carry out of the tensile testing. With the objective to know the real mechanical behavior with the initial loading conditions established and different testing velocities. All and each one of the results are calculated experimental and numerically and validated throughout of the finite element method, using the software ANSYS 5.5.3. [Spanish] En este trabajo se efectuan pruebas de fractura en especimenes con una grieta lateral, para analizar el estado de esfuerzos resultantes alrededor de la punta de la grieta y la forma en que se afecta la resistencia del material a fin de obtener la tenacidad de fractura para el modo de carga I. Ademas, se explica la forma como se obtienen las propiedades mecanicas en el polimetil metacrilato (PMMA), tales como: modulo de elasticidad, esfuerzo normal maximo, esfuerzo de cadencia y las curvas esfuerzo-deformacion unitaria, esfuerzo-tiempo (stress-rate) y deformacion-tiempo (strain-rate), a traves de la realizacion de la prueba de tension. Se busca conocer el comportamiento mecanico real ante las condiciones de carga establecidas y a distintas velocidades de prueba. Todo y cada uno de los resultados se efectuan de manera experimental y son evaluados numericamente a traves del metodo del elemento finito, con el programa ANSYS 5.5.3.

  4. PENILAIAN PROGRAM PRAKTIKUM TERHADAP PENINGKATAN KUALITI GURU PRA PERKHIDMATAN: ANALISIS BERDASARKAN LATENT GROWTH CURVE MODELLING

    Directory of Open Access Journals (Sweden)

    Azizah Sarkowi

    2015-12-01

    Full Text Available Practicum is an important component in teacher education programs. This study identify the improvement in the quality of pre-service teachers for three phases practicum. Multi-point prospective panel study has been conducted on a 541 pre-service teachers at the Institute of Teacher Education. Teacher’s quality is measured based on the achievement of program learning outcomes. Based on matching last six digit identification card number for three studies series, 337 questionnaires were analyzed using a latent growth curve model using AMOS 18.0. Latent Analysis shows that the model achieve goodness of fit. There is a linear trend of improvement in the performance of the three phases of the practicum. This increase varies between individuals and the rate of growth depends on the level of achievement at practicum phase I. Studies indicate that the increase in the practicum period of teacher education policy should be continued.

  5. Estudio numerico y experimental del proceso de soldeo MIG sobre la aleacion 6063--T5 utilizando el metodo de Taguchi

    Science.gov (United States)

    Meseguer Valdenebro, Jose Luis

    Electric arc welding processes represent one of the most used techniques on manufacturing processes of mechanical components in modern industry. The electric arc welding processes have been adapted to current needs, becoming a flexible and versatile way to manufacture. Numerical results in the welding process are validated experimentally. The main numerical methods most commonly used today are three: finite difference method, finite element method and finite volume method. The most widely used numerical method for the modeling of welded joints is the finite element method because it is well adapted to the geometric and boundary conditions in addition to the fact that there is a variety of commercial programs which use the finite element method as a calculation basis. The content of this thesis shows an experimental study of a welded joint conducted by means of the MIG welding process of aluminum alloy 6063-T5. The numerical process is validated experimentally by applying the method of finite element through the calculation program ANSYS. The experimental results in this paper are the cooling curves, the critical cooling time t4/3, the weld bead geometry, the microhardness obtained in the welded joint, and the metal heat affected zone base, process dilution, critical areas intersected between the cooling curves and the curve TTP. The numerical results obtained in this thesis are: the thermal cycle curves, which represent both the heating to maximum temperature and subsequent cooling. The critical cooling time t4/3 and thermal efficiency of the process are calculated and the bead geometry obtained experimentally is represented. The heat affected zone is obtained by differentiating the zones that are found at different temperatures, the critical areas intersected between the cooling curves and the TTP curve. In order to conclude this doctoral thesis, an optimization has been conducted by means of the Taguchi method for welding parameters in order to obtain an

  6. Application of numerical analysis methods to thermoluminescence dosimetry; Aplicacion de metodos de analisis numerico a la dosimetria por termoluminiscencia

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Ros, J M; Delgado, A

    1989-07-01

    This report presents the application of numerical methods to thermoluminescence dosimetry (TLD), showing the advantages obtained over conventional evaluation systems. Different configurations of the analysis method are presented to operate in specific dosimetric applications of TLD, such as environmental monitoring and mailed dosimetry systems for quality assurance in radiotherapy facilities. (Author) 10 refs.

  7. Rigid inclusions-Comparison between analytical and numerical methods; Inclusiones rigidas-Analisis comparativo de los metodos analiticos y numericos

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Perez, R.; Melentijevic, S.

    2014-07-01

    This paper compares different analytical methods for analysis of rigid inclusions with finite element modeling. First of all, the load transfer in the distribution layer is analyzed for its different thicknesses and different inclusion grids to define the range between results obtained by analytical and numerical methods. The interaction between the soft soil and the inclusion in the estimation of settlements is studied as well. Considering different stiffness of the soft soil, settlements obtained analytical and numerically are compared. The influence of the soft soil modulus of elasticity on the neutral point depth was also performed by finite elements. This depth has a great importance for the definition of the total length of rigid inclusion. (Author)

  8. Analisi matematica

    CERN Document Server

    Canuto, Claudio

    2014-01-01

    Il presente testo intende essere di supporto ad un secondo insegnamento di Analisi Matematica in quei corsi di studio (quali ad esempio Ingegneria, Informatica, Fisica) in cui lo strumento matematico parte significativa della formazione dell'allievo. I concetti e i metodi fondamentali del calcolo differenziale ed integrale in più variabili, le serie di funzioni e le equazioni differenziali ordinarie sono presentati con l'obiettivo primario di addestrare lo studente ad un loro uso operativo, ma critico. L'impostazione didattica dell'opera ricalca quella usata nel testo parallelo di Analisi Matematica I. La modalità di presentazione degli argomenti ne permette un uso flessibile e modulare. Lo stile adottato privilegia la chiarezza e la linearità dell'esposizione. Il testo organizzato su due livelli di lettura. Uno, più essenziale, permette allo studente di cogliere i concetti indispensabili della materia, di familiarizzarsi con le relative tecniche di calcolo e di trovare le giustificazioni dei principali r...

  9. Analisis Statistika dengan SPSS

    OpenAIRE

    Mustari, Kahar

    2012-01-01

    Buku ini membahas tentang berbagai model analisis statistika yang dapat digunakan dalam berbagai bidang penelitian. Pembahasan buku ini dilengkapi pula dengan penerapan analisis statistika yang menggunakan program SPSS versi 20 sehingga memudahkan pembaca untuk menerapkannya. Oleh karena itu, buku ini penting dibaca oleh mahasiswa atau peneliti yang melakukan pengolahan data penelitian.

  10. The Digital Autofluoroscope; L'Autofluoroscope Numerique; Tsifrovoj avtofluoroskop; Autofluoroscopio Numerico

    Energy Technology Data Exchange (ETDEWEB)

    Bender, M. A. [Roswell Park Memorial Institute, Buffalo, NY (United States)

    1964-10-15

    foie dix fois plus vite que par la scintigraphie classique. Le deuxieme avantage est que les donnees sont recueillies en meme temps sur la totalite de l'organe. Cela permet d'observer des processus dynamiques et d'utiliser des radioisotopes ou des composes marques ayant une periode physique ou biologique extremement courte. Plus la periode est courte, plus la dose administree peut etre elevee, ce qui permet des temps d'exploration d'autant plus reduits. La duree de l'exposition peut devenir tellement breve qu'il est desormais possible d'exploiter les techniques cinephotographiques pour l'Observation quantitative du passage de PHippuran marque a l'iode-131 dans le rein et du baryum-137m dans les cavites du coeur. (author) [Spanish] El autofluoroscopio es un dispositivo fijo que sirve para representar graficamente la distribucion de los isotopos emisores gamma en el cuerpo humano. Como los aparatos modernos de exploracion, ese instrumento dispone de un colimador sensible a fuentes profundas, con un poder de resolucion suficiente, y de un sistema de alta eficacia para la presentacion de datos con un contraste satisfactorio. El detector consiste en 300 cristales de Nal(Tl) de 2 pulg de espesor y -3/8- pulg de diametro dispuestos en 20 columnas y 15 hileras que forman un cuerpo de 6 x 9 pulg. Cada uno de los 300 cristales esta acoplado opticamente a dos conductores de luz de plexiglas; los 20 conductores de cada columna van unidos a un fotomultiplicador y los 15 de cada hilera a otro. Los impulsos que se producen simultaneamente en cualquier par de los 35 fotomultiplicadores permiten identificar el cristal en que ha ocurrido una interaccion. La senal localizadora determinada por el conjunto de los lotomultiplicadores es independiente de la amplitud del impulso. Los circuitos de anticoincidencia rechazan los impulsos simultaneos debidos a una interaccion de Compton seguida por la absorcion de la radiacion dispersa en un cristal adyacente. El caracter numerico del sistema de

  11. Comparative analysis of the serial/parallel numerical calculation of boiling channels thermohydraulics; Analisis comparativo del calculo numerico serie/paralelo de la termohidraulica de canales con ebullicion

    Energy Technology Data Exchange (ETDEWEB)

    Cecenas F, M., E-mail: mcf@iie.org.mx [Instituto Nacional de Electricidad y Energias Limpias, Reforma 113, Col. Palmira, 62490 Cuernavaca, Morelos (Mexico)

    2017-09-15

    A parallel channel model with boiling and punctual neutron kinetics is used to compare the implementation of its programming in C language through a conventional scheme and through a parallel programming scheme. In both cases the subroutines written in C are practically the same, but they vary in the way of controlling the execution of the tasks that calculate the different channels. Parallel Virtual Machine is used for the parallel solution, which allows the passage of messages between tasks to control convergence and transfer the variables of interest between the tasks that run simultaneously on a platform equipped with a multi-core microprocessor. For some problems defined as a study case, such as the one presented in this paper, a computer with two cores can reduce the computation time to 54-56% of the time required by the same program in its conventional sequential version. Similarly, a processor with four cores can reduce the time to 22-33% of execution time of the conventional serial version. These results of substantially reducing the computation time are very motivating of all those applications that can be prepared to be parallelized and whose execution time is an important factor. (Author)

  12. An experimental-numerical method for comparative analysis of joint prosthesis; Un metodo numerico-experimental para el analisis comparativo de protesis articulares

    Energy Technology Data Exchange (ETDEWEB)

    Claramunt, R.; Rincon, E.; Zubizarreta, V.; Ros, A.

    2001-07-01

    The difficulty that exists in the analysis of mechanical stresses in bones is high due to its complex mechanical and morphological characteristics. This complexity makes generalists modelling and conclusions derived from prototype tests very questionable. In this article a relatively simple comparative analysis systematic method that allow us to establish some behaviour differences in different kind of prosthesis is presented. The method, applicable in principle to any joint problem, is based on analysing perturbations produced in natural stress states of a bone after insertion of a joint prosthesis and combines numerical analysis using a 3-D finite element model and experimental studies based on photoelastic coating and electric extensometry. The experimental method is applied to compare two total hip prosthesis cement-free femoral stems of different philosophy. One anatomic of new generation, being of oblique setting over cancellous bone and the other madreporique of trochantero-diaphyseal support over cortical bone. (Author) 4 refs.

  13. Numerical modeling of a rotor misalignment; Modelado numerico del desalineamiento de un rotor

    Energy Technology Data Exchange (ETDEWEB)

    Leon Pina, Roberto

    2009-12-15

    diagnosticar esta falla, se basa en analizar los espectros de vibracion pero esta solo funciona bajo condiciones particulares. Con el proposito de reproducir el comportamiento dinamico de un rotor desalineado, en el presente trabajo se utilizan modelos simplificados no-lineales de los apoyos, cuyo objetivo es contribuir a facilitar estudios futuros del comportamiento fluidodinamico de las chumaceras, ayudando a identificar el tipo y magnitud de la no linealidad presente en los apoyos y apoyandose en el analisis del comportamiento vibratorio de rotores desalineados observado en campo.

  14. Computational package for the dynamic analysis of synchronous generators and their controls; Paquete computacional para el analisis de generadores sincronos y sus controles

    Energy Technology Data Exchange (ETDEWEB)

    Perez Guillen, Jesus Artemio

    1997-12-31

    This thesis presents a computational package for the dynamic analysis of synchronous generators and their controls in a machine - infinite bus system. The package is integrated by a graphic interface for Windows environment and several models for the different components of the generation system. The development of the graphic interface was carried out with object oriented programming under Windows environment, available from Borland C++, which generates a group of menus that integrates an environment of interactive and versatile simulation. The package contains mathematical models of third, fourth, fifth and sixth order for synchronous generators of round and salient poles. Several mathematical models for the excitation systems DC1A, AC1A and ST1A, according to the IEEE classification, are included. Models for thermal and hydraulic turbines with governor of speed are also included, as well as a mathematical model for the power system stabilizer and magnetic saturation on synchronous generators. Numerical methods like Euler, Modified Euler and Runge Kutta of second and fourth order are used to solve the characteristics differential equations of the system under study. Algorithms for graphic generation includes phasor diagram, capability and saturation curves for synchronous machine. Computer models are validated and sensitivity analysis is carried out in order to assess the ef ect of type of model for synchronous machine, excitation systems, power system stabilizer, magnetic saturation in the synchronous generator and different numerical methods of integration. The computational package is useful in teaching and research on the dynamic response of synchronous machines and their controls. [Espanol] En este trabajo se presenta el desarrollo de un paquete computacional para el analisis dinamico de generadores sincronos y sus controles en el esquema de una unidad de generacion - bus infinito. El paquete esta integrado por una interfaz grafica para ambiente Windows y un

  15. Analysis of the deconvolution of the thermoluminescent curve of the zirconium oxide doped with graphite; Analisis de la deconvolucion de la curva termoluminiscente del oxido de zirconio dopado con grafito

    Energy Technology Data Exchange (ETDEWEB)

    Salas C, P. [IMP, 07000 Mexico D.F. (Mexico); Estrada G, R. [Depto. de Fisica y Matematicas, UIA, Unidad Stanta Fe, 01000 Mexico D.F. (Mexico); Gonzalez M, P.R.; Mendoza A, D. [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2003-07-01

    In this work, we present a mathematical analysis of the behavior of the thermoluminescent curve (Tl) induced by gamma radiation in samples made of zirconium oxide doped with different amounts of graphite. In accordance with the results gamma radiation induces a Tl curve with two maximum of emission localized in the temperatures at 139 and 250 C, the area under the curve is increasing as a function of the time of exposition to the radiation. The analysis of curve deconvolution, in accordance with the theory which indicates that this behavior must be obey a Boltzmann distribution, we found that each one of them has a different growth velocity as the time of exposition increase. In the same way, we observed that after the irradiation was suspended each one of the maximum decrease with different velocity. The behaviour observed in the samples is very interesting because the zirconium oxide has attracted the interest of many research groups, this material has demonstrated to have many applications in thermoluminescent dosimetry and it can be used in the quantification of radiation. (Author)

  16. ANALISIS PENYEBAB BANJIR KALI JUANA

    Directory of Open Access Journals (Sweden)

    Teguh Marhendi

    2017-04-01

    Full Text Available Kali Juana yang berada di Kabupaten Pati dan Kudus serta sebagian kecil di Kabupaten Grobogan dan Blora, merupakan kawasan banjir. Kejadian banjir di Kali Juana, sudah menjadi rutinitas setiap musim hujan.Dari Januari sampai bulan Mei 2016tercatat terjadi 11 kejadian banjir dibeberapa wilayah, seperti Kecamatan Kaliwungu, Undaan dan Mejobo (Kab. Kudus serta Pati, Margorejo dan Juwana (Kab. Pati. Kali Juana merupakan bifurkasi Kali Serang pada Pintu Wilalung, yang berfungsi sebagai pintu pengatur banjir (dibangun pada zaman Belanda tahun 1918, melalui Kali Babalan menuju ke Kali Juana. Tulisan inidimaksudkan untuk menganalisis penyebab kejadian banjir di Kali Juana. Analisis dilakukan dengan melakukan kajani dan analisis hujan serta mekanisme aliran. Hasil analisis menunjukkan bahwa kondisi Kali Juana dari pertemuan Kali Logung di pintu Wilalung sampai hilir telah mengalami pendangkalan akibat kemiringan dasar atau topografi yang landai, dan mengakibatkan mudah terjadi sedimentasi sehingga mengurangi kapasitas pengaliran. Hal ini menyebabkan luapan banjir sering menggenangi wilayah Kabupaten Kudus dan Pati.

  17. ANALISIS LITERASI EKONOMI

    Directory of Open Access Journals (Sweden)

    Peter Garlans Sina

    2012-10-01

    Full Text Available Abstract: Analysis of Economic Literacy. The aim of this research is as an effort to increase economic literacy for individuals and households who want to achieve prosperity. Therefore, the obligation of improving the economic literacy needs to be done in a well-planned manner and come from the strong intention to learn in order to improve the economic literacy. It could have an effect on the assets accumulation, a better debt management, as a protection, as well as to increase savings and managing spending intelligently.   Keyword: economic literacy, asset, debt, protection, saving, spending   Abstrak: Analisis Literasi Ekonomi. Tulisan ini bertujuan sebagai upaya meningkatkan literasi ekonomi bagi individu maupun rumah tangga yang menginginkan mencapai kesejahteraan. Oleh karena itu, kewajiban meningkatkan literasi ekonomi perlu dilakukan secara terencana dan diawali dari niat untuk belajar meningkatkan literasi ekonomi karena dapat berefek pada akumulasi aset, pengelolaan utang yang tepat, proteksi, meningkatkan tabungan dan cerdas mengelola pengeluaran.   Kata kunci: literasi ekonomi, aset, utang, proteksi, menabung, pengeluaran

  18. Experimental numerical study utilizing CFD in a stratified gasifier operating with biomass; Estudio numerico experimental de un gasificador estratificado que opera con biomasa, utilizando CFD

    Energy Technology Data Exchange (ETDEWEB)

    Rogel Ramirez, Alejandro

    2007-07-01

    The central idea behind this work is the developing of a numeric-experimental model, useful to optimize the biomass stratified gasifier design. Firstly, model validation will be carried up by comparison with reference experimental data available. This study describes a 1-D + 2-D numerical model used to simulate the gasification of pine wood pellets in a stratified downdraft gasifier whereby Eulerian conservation equations are solved for particle and gas phase components, velocities and specific enthalpies. The model takes into account the biomass particle process such as heating up, drying, primary pyrolysis of biomass, secondary pyrolysis of tar, homogeneous reactions and heterogeneous combustion/gasification reactions, and particle size change. This CFD model can be used to predict temperature profiles, gas composition, producer gas lower heating value, and carbon conversion efficiency, and the reactor performance when operating parameters and feed properties are changed. The standard {kappa}-{epsilon} and RNG {kappa}-{epsilon} models were used to simulate the turbulent flow conditions. [Spanish] La idea central del presente trabajo es el desarrollo de un modelo numerico- experimental, para optimizar el diseno de gasificadores estratificados de biomasa. Primeramente, el modelo sera validado utilizando datos experimentales disponibles en la literatura. Este estudio describe un modelo numerico 1-D+2-D, utilizado para simular la gasificacion de 'pelets' de madera de pino en un gasificador estratificado de flujos paralelos, en el que se resuelven ecuaciones de conservacion Eulerianas para los componentes de la fase gaseosa, la fase solida, velocidades y entalpias especificas. El modelo considera procesos como: calentamiento, secado de la biomasa, pirolisis primaria de la madera, pirolisis secundaria de los alquitranes, reacciones homogeneas, reacciones heterogeneas de combustion/gasificacion y cambio en el tamano de la particula. Este modelo CFD puede ser

  19. PENERAPAN ANALISIS SWOC DALAM RENCANA STRATEGIS PENDIDIKAN

    Directory of Open Access Journals (Sweden)

    Hardianto -

    2018-01-01

    Full Text Available Analisis SWOC merupakan salah satu langkah yang bisa diambil dalam membuat sebuah rencana strategis pendidikan. Analisis ini dilakukan untuk melihat secara mendalam situasi internal dan eksternal organisasi. Situasi internal yang dilihat adalah kekuatan (Strenghts dan kelemahan (Weaknesses organisasi pendidikan. Situasi eksternal berupa peluang (Opportinities dan tantangan (Challenges. Untuk membuat sebuah rencana strategis yang baik dapat dilakukan dengan menganalisis setiap kekuatan, kelemahan, peluang dan tantangan. Teknik kartu salju (snow card bisa digunakan dalam melakukan analisis SWOC. Hasil analisis tersebut nantinya akan melahirkan kombinasi strategi kekuatan-peluang, kekuatan-tantangan, kelemahan-peluang dan kelemahan-tantangan.

  20. Analisis Cadangan Devisa Indonesia

    Directory of Open Access Journals (Sweden)

    Lusia Bunga Uli

    2016-09-01

    Full Text Available Abstract This study aims to determine the relationship between variables export, import, and exchange rate against Foreign Exchange Reserves in Indonesia. The data used in the empirical study of a sequence of data monthly time of year 2011.01 through 2014.12 from Bank Indonesia and the Central Statistics Agency (BPS. The analysis tool used is Auto Regression Vector Model (VAR. The results of this study indicate that the one-way relationship between the variables of foreign reserves and export. Then one-way relationship between exchange rate and exports. Lastly, there is a two-way relationship between imports and foreign exchange reserves, two-way relationship between exchange rate and foreign exchange reserves, two-way relationship between imports and exports, two-way relationship between the exchange rate and imports. The results also showed foreign exchange reserves are significantly influenced by the movement itself at a probability of 1 %. Export variable negative and not significantly affect the foreign exchange reserves. While imports of positive and not significant to the foreign exchange reserves. Foreign Exchange Reserves Indonesia is positively influenced by the exchange rate and not significant. Keywords: Foreign exchange reserves, exports, imports, exchange rate   Abstrak. Penelitian ini bertujuan untuk mengetahui seberapa keterkaitan antar variabel ekspor, impor, dan nilai tukar rupiah terhadap Cadangan Devisa Indonesia. Data yang digunakan dalam kajian empiris ini merupakan data runtutaan waktu bulanan dari tahun 2011.01 sampai 2014. 12 yang berasal dari Bank Indonesia dan Badan Pusat Statistik (BPS. Alat analisis yang digunakan yaitu Vector Autoregression Model (VAR. Hasil dari penelitian ini menunjukkan bahwa hubungan searah antara variabel cadangan devisa ke ekspor. Lalu hubungan searah antara kurs terhadap ekspor Terakhir, terdapat hubungan dua arah antara impor dan cadangan devisa, hubungan dua arah antara kurs dan cadangan

  1. Lezioni di analisi matematica

    CERN Document Server

    Sbrana, Francesco

    1951-01-01

    Calcolo integrale delle funzioni di una variabile ; serie di funzioni di una variabile reale o complessa ; proprietà notevoli delle curve piane e sghembe ; ancora sulla intregazione delle funzioni di una variabile ; derivate e differenziali delle funzioni di più variabili ; integrali curvilinei, e di campo ; equazioni differenziali ordinarie ; cenni sulle equazioni alle derivate parziali ; cenni sulle serie di funzioni ortogonali.

  2. Analisis Semiotik Sajak Bulang Cahaya

    Directory of Open Access Journals (Sweden)

    Junaidi Junaidi

    2014-11-01

    Full Text Available Penelitian ini bertujuan menggali makna tanda yang terdapat dalam sajak Bulang Cahaya karya Rida K Liamsi. Untuk menggali makna itu, pendekatan analisis semiotik Roland Barthes digunakan. Hasil penelitian menunjukkan bahwa sajak ini berisi tanda-tanda bersumber dari kosa kata Melayu lama. Sajak ini juga berisi simbol-simbol yang berkaitan dengan kehidupan orang Melayu. Penggunaan kata-kata Melayu lama dan simbol Melayu memperkuat setting Melayu dalam sajak ini. Analisis makna menunjukkan bahwa seseorang merasakan kedukaan sangat mendalam ketika cintanya harus berakhir, tetapi ia terus merasakan kerinduan dengan kekasihnya yang telah pergi. Mitos cinta yang terdapat dalam pusinya adalah orang tahu bahwa putus cinta itu menyakitkan tetapi orang tetap saja jatuh cinta.

  3. Analisis Industri Ritel Di Indonesia

    OpenAIRE

    Soliha, Euis

    2008-01-01

    This article presents an overview the analisys of retail industry in Indonesia.Retail industry in Indonesia grow rapidly. Industrial presence of modern retailbasically exploits public shopping pattern especially middle-weight and to which donot want to mill around in traditional market. Analysis Five Forces is used toanalysis retail industry. Analysis five force is bargaining power of buyers,bargaining power of suppliers, threat of new entrants, threat of new substituteproducts, and rivalry a...

  4. ANALISIS POSITIONING RESTORAN CEPAT SAJI

    Directory of Open Access Journals (Sweden)

    Osa Omar Sharif

    2017-04-01

    Full Text Available Penelitian ini bertujuan untuk meneliti positioning restoran cepat saji McDonald's, Kentucky Fried Chicken, California Fried Chicken, A&W, dan Texas Chicken. Penelitian dilakukan di Kota Bandung dengan mengambil sebanyak 400 responden. Analisis yang digunakan dalam penelitian ini adalah analisis multidimensional scaling, analisis memberikan gambaran positioning dari restoran cepat saji yang ditampilkan dalam perceptual map. Restoran cepat saji yang memiliki layanan paling baik adalah McD dan yang memiliki layanan paling buruk adalah CFC. Restoran cepat saji yang memiliki rasa makanan paling enak adalah McD dan yang memiliki rasa makanan tidak enak adalah CFC. KFC dinilai paling ideal karena selalu berhasil menduduki peringkat satu dan dua jika dilihat dari sudut pandang restoran cepat saji yang lain. Pesaing terdekat McD adalah KFC. McD mendapatkan ranking pertama dari segi atribut layanan, kebersihan, variasi makanan, dan rasa makanan. Dengan posisi seperti ini McD seharusnya tetap menjaga kualitas layanan, kebersihan, variasi makanan, dan rasa makanan agar konsumen tetap memilih untuk datang ke McD. KFC sebaiknya tetap menjaga suasana yang membuat konsumen nyaman akan suasana di dalam atau diluar restoran

  5. ANALISIS PERBAIKAN SISTEM PENTANAHAN TELEKOMUNIKASI

    Directory of Open Access Journals (Sweden)

    Umar Umar

    2015-04-01

    Hasil dari penelitian ini adalah perbaikan sistem pentanahan site Kampung Baru dengan menggunakan konfigurasi single point connection window (SPCW, untuk mengamankan sistem telekomunikasi dari kebocoran arus dan petir serta imbasnya.  Perbaikan sistem pentanahan di site Kampung Baru menggunakan banyak elektroda yang membentuk persegi dikarenakan topografi tempat di sana yang memungkinkan dan efektif adalah menggunakan sistem tersebut. Berdasarkan hasil analisis dan perhitungan perbaikan sistem di site Kampung Baru, didapatkan nilai perhitungan sistem pentanahan adalah 1.34 Ohm serta pengukurannya 1.21-1.25 Ohm.

  6. Semiotika Teks: Sebuah Pendekatan Analisis Teks

    Directory of Open Access Journals (Sweden)

    Yasraf Amir Piliang

    2004-12-01

    tanda-tanda yang membentuk apa yang disebut sebagai ‘teks’. Analisis teks, menurut Roland Barthes, akan menghasilkan makna denotatif, yakni makna tanda yang bersifat eksplisit, dan makna konotatif, yaitu makna tanda lapis kedua yang bersifat implisit.

  7. Analysis and solution of algebraic-differential equations of the steam generation processes; Analisis y resolucion de ecuaciones algebraico-diferenciales de los procesos de generacion de vapor

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Herrera, Juan Anibal

    1996-10-01

    steady and dynamic state in orden to: a) Observe the behavior of the variables during the coupling of two or more equipment. b) Observe the characteristics what present the numerical integration method to solve the equipment`s network and analyze the obtained numerical results. In this work the individual mathematical models were analyzed and adapted to operate the equipment with different operating conditions, changes in their geometry and different connections with others equipment. Later an equipment`s network was built to represent the cycle boiler-superheater and a numerical method was chosen to solve the equipment`s network in steady and dynamic state. [Espanol] Este trabajo presenta la construccion, analisis y solucion de una red de equipos en regimen estable y dinamico, a partir de: a) Los modelos matematicos de equipos individuales y de sus especificaciones geometricas. b) Las interconexiones topologicas entre los equipos. c) La seleccion de un metodo numerico para resolver simultaneamente los modelos matematicos. Los modelos matematicos seleccionados representan el ciclo caldera-sobrecalentador. Estos modelos fueron tomados del simulador modular MICROTERM-300, el cual contiene los modelos simplificados de los procesos (agua de alimentacion, caldera, turbinas, etc.) de la planta termoelectrica Francisco Perez Rios de Tula Hidalgo, Mexico. Este trabajo fue desarrollado conforme a las siguientes etapas: 1.- Se selecciono un metodo de integracion numerico para resolver simultaneamente las ecuaciones algebraicas y diferenciales de los equipos que conforman el ciclo caldera-sobrecalentador. 2.- Se adaptaron los modelos matematicos en su forma individual para permitir que los equipos puedan ser dimensionables (que permitan cambios en sus geometrias), flexibles (que puedan operar a diferentes condiciones de operacion) y configurables (que permitan diferentes formas de conexion). Ademas, que tengan una representacion de las ecuaciones que permitan analizarlas y una

  8. Risk analysis; Analisis de riesgos

    Energy Technology Data Exchange (ETDEWEB)

    Baron, J H; Nunez McLeod, J; Rivera, S S [Universidad Nacional de Cuyo, Mendoza (Argentina). Instituto de Capacitacion Especial y Desarrollo de Ingenieria Asistida por Computadora (CEDIAC)

    1997-07-01

    This book contains a selection of research works performed in the CEDIAC Institute (Cuyo National University) in the area of Risk Analysis, with specific orientations to the subjects of uncertainty and sensitivity studies, software reliability, severe accident modeling, etc. This volume presents important material for all those researches who want to have an insight in the risk analysis field, as a tool to solution several problems frequently found in the engineering and applied sciences field, as well as for the academic teachers who want to keep up to date, including the new developments and improvements continuously arising in this field. [Spanish] Este libro contiene una seleccion de trabajos de investigacion realizados dentro del Instituto de Capacitacion Especial y Desarrollo de la Ingenieria Asistida por Computadora en el area del analisis de riesgos, con una orientacion hacia el estudio de incertidumbres y sensibilidad, confiabilidad de software, modelacion de accidentes severos, etc. Este volumen recoge un material de indudable importancia e interes para todos aquellos investigadores y profesionales que desean incursionar en este campo del analisis de riesgos como herramienta para la solucion de problemas frecuentemente encontrados en la ingenieria y las ciencias aplicadas, asi como para los academicos que desean mantenerse al dia, conociendo los nuevos desarrollos y tecnicas que constantemente aparecen en su area.

  9. Analisis Kebijakan dan Efektivitas Organisasi

    Directory of Open Access Journals (Sweden)

    Amir Syarifudin Kiwang

    2015-05-01

    Full Text Available Penerapan Peraturan Gubernur Nusa Tenggara Timur Nomor 8 Tahun 2011 tentang Organisasi dan Tata Kerja Unit Pelaksana Teknis Pendidikan dan Pelatihan Koperasi dan Usaha Mikro Kecil dan Menengah pada Dinas Koperasi dan Usaha Mikro Kecil dan Menengah Provinsi Nusa Tenggara Timur adalah dalam rangka untuk meningkatkan efektivitas kerja organisasi pada UPT Diklat Koperasi dan UMKM. Penelitian ini berusaha untuk melihat dampak kebijakan organisasi terhadap efektivitas organisasi dengan menggunakan enam elemen variabel dari kebijakan dan praktik manajemen. Keenam elemen tersebut adalah penetapan tujuan strategis, pencarian dan pemanfaatan sumber daya, lingkungan prestasi, proses komunikasi, kepemimpinan dan pengambilan keputusan, serta adaptasi dan inovasi organisasi. Penelitian kualitatif ini menggunakan pendekatan studi kasus. Teknik analisis data yang digunakan adalah analisis data model Miles dan Huberman, yang terdiri atas reduksi data, display/penyajian data, dan kesimpulan/verifikasi. Hasil penelitian menunjukkan bahwa efektivitas organisasi pada UPT Diklat koperasi dan UMKM belum berjalan secara baik, hal ini dapat dilihat dari beberapa hal antara lain, belum adanya tenaga spesialisasi pengelola diklat dan tenaga khusus (sarjana di bidang perkoperasian dan kondisi lingkungan kerja (lingkungan prestasi pada UPT Diklat koperasi dan UMKM yang belum efektif. Penempatan pegawai juga belum tepat, mutasi ke UPT Diklat Koperasi dan UMKM tidak memperhatikan latar belakang pendidikan dan spesialisasi/keahlian pegawai sehingga membutuhkan waktu dalam proses penyesuaian serta menurunkan jumlah pelaksanaan diklat dikarenakan keterbatasan alokasi dana.

  10. ANALISIS DAYA SAING KEDELAI INDONESIA

    Directory of Open Access Journals (Sweden)

    Sarwono Sarwono

    2014-09-01

    Full Text Available RCA (Revealed Comparative Advantage index of soybean in Indonesia from 1983 up to 2013 is less than one, mostly. It means that the competitiveness of soybean in Indonesia is low. The purpose of this study is to analyze the factors influence the soybean competitiveness. OLS (Ordinary Least Square was used as the analysis method. Hypotheses test based on that analysis model is not bias, so that, classic divergence test is needed. It is for getting the Best Linier Unbiased Estimator (BLUE appraisal. T statistic and F statistic were also applied. The result of this research shows that production and export have positive and significant influence. In addition, exchange rate and government policy do not influence the Indonesia soybean competitiveness.Indeks RCA (Revealed Comparative Advantage kedelai Indonesia dari tahun 1983-2013 kecenderungan bernilai kurang dari satu yang berarti daya saing kedelai Indonesia rendah.Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi daya saing kedelai Indonesia.Metode analisis yang digunakan adalah Ordinary Least Square (OLS.Pengujian hipotesis berdasarkan model analisis tersebut tidak bias maka perlu dilakukan uji penyimpangan klasik yang tujuannya agar diperoleh penaksiran yang bersifat Best Linier Unbiased Estimator (BLUE.Pengujian statistik menggunakan uji t statistikdan uji f statistik.Hasil penelitian ini menunjukkan bahwa produksi dan ekspor berpengaruh secara positif dan signifikan terhadap daya saing kedelai Indonesia. Nilai tukar rupiah dan kebijakan pemerintah tidak berpengaruh terhadap daya saing kedelai Indonesia.

  11. Analisis Harmonisa Inverter PWM Satu Fasa

    OpenAIRE

    Rejeki Simanjorang

    2008-01-01

    Pada tesis ini dianalisis harmonisa inverter PWM satu fasa. Inverter PWM satu fasa yang akan ditinjau adalah inverter satu fasa jembatan penuh (konvensional) dan inverter komposit. Analisis difokuskan pada penentuan pola penyaklaran yang optimum agar pembangkitan harmonisa dan switching losses inverter rendah. Untuk menentukan pola penyaklaran optimum maka dilakukan analisis yang berbasis pada rangkaian ekivalen harmonisa inverter satu fasa. Dengan menggunakan pola penyaklaran optimum, kedua ...

  12. Vibration analysis to characterize the behavior of fracture rotors operating in line; Analisis de vibracion para caracterizar el comportamiento de rotores fracturados operando en linea

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Illescas, Rafael

    2001-07-01

    , in other words. Unstable response behavior is quite sensitive to such nonlinear parameters. A general overview in this area is presented as a part of a multidisciplinary study. [Spanish] En este trabajo se presenta un analisis en tres enfoques: teorico, numerico y experimental, del comportamiento dinamico y de la estabilidad vibratoria de un sistema rotor chumacera conteniendo una grieta transversal localizada a medio tramo de la longitud axial del eje. La presencia de una grieta transversal es considerada mediante la modelacion de la variacion periodica de la rigidez estructural del rotor, la cual se expresa en funcion del tiempo (o posicion angular). El amortiguamiento del sistema incluye un amortiguamiento externo debido al fluido dentro del cual se encuentra el rotor girando y, el mas significativamente, un amortiguamiento viscoso originado por la pelicula de aceite en las chumaceras. El problema en estudio consiste en un rotor extendido del tipo Jeffcott, el cual tiene un disco al centro y chumaceras hidrodinamicas identicas en los dos extremos. Un aspecto innovador que aumenta la complejidad del analisis es que se incluye el efecto que tiene la masa del eje en cada una de las chumaceras en los extremos, ademas del efecto obvio de la masa del disco. Se hace una analisis numerico de la estabilidad lineal del sistema incluyendo todos los aspectos mencionados mediante la teoria de Floquet. Algunos resultados son comparados con los obtenidos por otros investigadores en este campo como Gasch, Meng y otros. El sistema parametricamente excitado resultante es analizado utilizado una solucion de perturbacion lineal del sistema. El sistema de ecuaciones se encuentra utilizando terminos complejos y ha sido representado y escrito en programas de computo en MATLAB desarrollados por el autor de la tesis para calcular la estabilidad lineal del problema. Varias configuraciones de rotores simples y reales son estudiados con el fin de ilustrar las propiedades basicas de rotores

  13. ANALISIS IMPOR BERAS DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Ratih Kumala Sari

    2014-10-01

    Full Text Available Abstrak ___________________________________________________________________ Salah satu kebijakan pemerintah untuk memenuhi kebutuhan beras yaitu dengan menggenjot produksi beras dalam negeri. Namun dengan semakin meningkatnya jumlah penduduk akan meningkatkan permintaan terhadap beras dan upaya peningkatan produktivitas dalam negeri tidak dapat memenuhi kebutuhan beras dalam negeri. Sehingga untuk menutupi kekurangan tersebut pemerintah mengambil keputusan untuk melakukan impor beras dari negara lain. Akan tetapi pada kenyataannya impor beras dilakukan ketika data statistik menunjukkan bahwa Indonesia sedang mengalami surplus beras. Penelitian ini bertujuan untuk mengetahui faktor-faktor apa saja yang mempengaruhi impor beras di Indonesia. Metode analisis yang digunakan adalah analisis regresi linier berganda dengan model Error Correction Model (ECM. Berdasarkan hasil penelitian disimpulkan bahwa secara parsial maupun secara bersama-sama produksi beras, konsumsi beras, harga beras dalam negeri dan nilai tukar rupiah terhadap dollar AS berpengaruh dan signifikan terhadap impor beras di Indonesia. Abstract ___________________________________________________________________ One of the government’s policy to fulfill the need of rice is to boost the domestic production. However, by increasing the population, the demand of rice will also increase and the effort of increasing the domestic productivity cannot supply domestic rice need. So, to cover the shortage the government make decision to import rice from other countries. Yet, in fact importing rice is occurred when the statistical data showed that the supply of rice in Indonesia is surplus. The purpose of this research is necessary to study the factors which influence the import of rice in Indonesia. The analysis method used is multiple linear regression analysis model with Error Correction Model (ECM. Based on the research proven that partially or jointly the production, the consumption, the

  14. Analisis Value Chain Di Industri Otomotif

    OpenAIRE

    Hendri, Hendri

    2017-01-01

    Penelitian ini untuk menganalisis industri otomotif. Tujuan dari penelitian ini adalah untuk menganalisis dan mengetahui aktivitas dan kondisi internal proses industri manufaktur dengan menggunakan value chain guna masukan dimasa akan datang bagi industri otomotif secara khusus. Value Chain merupakan rantai nilai yang dapat mengetahui kekuatan Perusahaan, keuntungan dan kesuksesan dari rantai aktivitas dalam Perusahaan atau industri manufaktur.Metode analisis menggunakan Statistika Deskript...

  15. Flashback analysis in tangential swirl burners; Analisis de reflujo de flama en combustores tangenciales de flujo giratorio

    Energy Technology Data Exchange (ETDEWEB)

    Valera-Medina, A. [CIATEQ A.C., Centro de Tecnologia Avanzada, Queretaro (Mexico)]. E-mail: agustin.valera@ciateq.mx; Syred, N. Abdulsada, M. [United Kingdom Cardiff University (United Kingdom)]. E-mails: syredn@cf.ac.uk; abdulsadam@cf.ac.uk

    2011-10-15

    Premixed lean combustion is widely used in Combustion Processes due to the benefits of good flame stability and blow off limits coupled with low NO{sub x} emissions. However, the use of novel fuels and complex flows have increased the concern about flashback, especially for the use of syngas and highly hydrogen enriched blends. Thus, this paper describes a combined practical and numerical approach to study the phenomenon in order to reduce the effect of flashback in a pilot scale 100 kW tangential swirl burner. Natural gas is used to establish the baseline results and effects of different parameters changes. The flashback phenomenon is studied with the use of high speed photography. The use of a central fuel injector demonstrates substantial benefits in terms of flashback resistance, eliminating coherent structures that may appear in the flow channels. The critical boundary velocity gradient is used for characterization, both via the original Lewis and von Elbe formula and via analysis using CFD and investigation of boundary layer conditions in the flame front. [Spanish] La combustion ligera premezclada se utiliza ampliamente en los procesos de combustion debido a los beneficios que brinda en terminos de buena estabilidad de flama y limites de extincion, aunado a la baja emision de NO{sub x}. Sin embargo, el uso de nuevos combustibles y de flujos complejos han incrementado la preocupacion por el reflujo de flama, especialmente para el uso de gas sintetico (syngas) y mezclas altamente hidrogenadas. Por ello, en este articulo se describe un metodo practico y numerico para el estudio del fenomeno a modo de reducir los efectos del reflujo de flama en un combustor piloto de tipo tangencial de flujo giratorio de 100 kW. Se usa gas natural para establecer la linea base de resultados y los efectos del cambio de diferentes parametros. El fenomeno de reflujo de flama se estudia por medio de fotografia de rapida adquisicion. El uso de un inyector central de combustible

  16. ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI

    Directory of Open Access Journals (Sweden)

    Azizul Khakim

    2015-10-01

    Full Text Available ABSTRAK ANALISIS KESELAMATAN TERMOHIDROLIK BULK SHIELDING REAKTOR KARTINI. Bulk shielding merupakan fasilitas yang terintegrasi dengan reaktor Kartini yang berfungsi sebagai penyimpanan sementara bahan bakar bekas. Fasilitas ini merupakan fasilitas yang termasuk dalam struktur, sistem dan komponen (SSK yang penting bagi keselamatan. Salah satu fungsi keselamatan dari sistem penanganan dan penyimpanan bahan bakar adalah mencegah kecelakaan kekritisan yang tak terkendali dan membatasi naiknya temperatur bahan bakar. Analisis keselamatan paling kurang harus mencakup analisis keselamatan dari sisi neutronik dan termo hidrolik Bulk shielding. Analisis termo hidrolik ditujukan untuk memastikan perpindahan panas dan proses pendinginan bahan bakar bekas berjalan baik dan tidak terjadi akumulasi panas yang mengancam integritas bahan bakar. Code tervalidasi PARET/ANL digunakan untuk analisis pendinginan dengan mode konveksi alam. Hasil perhitungan menunjukkan bahwa mode pendinginan konvekasi alam cukup memadai dalam mendinginkan panas sisa tanpa mengakibatkan kenaikan temperatur bahan bakar yang signifikan. Kata kunci: Bulk shielding, bahan bakar bekas, konveksi alam, PARET.   ABSTRACT THERMAL HYDRAULIC SAFETY ANALYSIS OF BULK SHIELDING KARTINI REACTOR. Bulk shielding is an integrated facility to Kartini reactor which is used for temporary spent fuels storage. The facility is one of the structures, systems and components (SSCs important to safety. Among the safety functions of fuel handling and storage are to prevent any uncontrolable criticality accidents and to limit the fuel temperature increase. Safety analyses should, at least, cover neutronic and thermal hydraulic calculations of the bulk shielding. Thermal hydraulic analyses were intended to ensure that heat removal and the process of the spent fuels cooling takes place adequately and no heat accumulation that challenges the fuel integrity. Validated code, PARET/ANL was used for analysing the

  17. Lagrangian Curves on Spectral Curves of Monopoles

    International Nuclear Information System (INIS)

    Guilfoyle, Brendan; Khalid, Madeeha; Ramon Mari, Jose J.

    2010-01-01

    We study Lagrangian points on smooth holomorphic curves in TP 1 equipped with a natural neutral Kaehler structure, and prove that they must form real curves. By virtue of the identification of TP 1 with the space LE 3 of oriented affine lines in Euclidean 3-space, these Lagrangian curves give rise to ruled surfaces in E 3 , which we prove have zero Gauss curvature. Each ruled surface is shown to be the tangent lines to a curve in E 3 , called the edge of regression of the ruled surface. We give an alternative characterization of these curves as the points in E 3 where the number of oriented lines in the complex curve Σ that pass through the point is less than the degree of Σ. We then apply these results to the spectral curves of certain monopoles and construct the ruled surfaces and edges of regression generated by the Lagrangian curves.

  18. Analisis Kinerja Local Area Network Menggunakan Router.

    OpenAIRE

    Hutahaean, Yosua

    2012-01-01

    Perangkat internetworking menawarkan komunikasi di antara segmen Local Area Network (LAN). Ada empat tipe utama perangkat internetworking ini: repeater, bridge, router, dan gateway. Perangkat ini dibedakan atas dasar system lapisan Open System Interconnection (OSI) yang digunakan, berfungsi sebagai media komunikasi dari LAN ke LAN. Pada Tugas Akhir ini penulis tertarik untuk membahas analisis kinerja Local Area Network (LAN) menggunakan Router yang menggunakan sistem antrian M/M/1 dimana j...

  19. ECM using Edwards curves

    DEFF Research Database (Denmark)

    Bernstein, Daniel J.; Birkner, Peter; Lange, Tanja

    2013-01-01

    -arithmetic level are as follows: (1) use Edwards curves instead of Montgomery curves; (2) use extended Edwards coordinates; (3) use signed-sliding-window addition-subtraction chains; (4) batch primes to increase the window size; (5) choose curves with small parameters and base points; (6) choose curves with large...

  20. Analysis and control of erosion by solid particles in the elements of the flow system of steam turbines; Analisis y control de erosion por particulas solidas en los elementos del sistema de flujo de turbinas de vapor

    Energy Technology Data Exchange (ETDEWEB)

    Mazur Czerwiec, Zdzislaw; Campos Amezcua, Alfonso; Campos Amezcua, Rafael [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2010-07-01

    The analysis of erosion by solid particles is presented of different elements of the flow channel of the steam turbines that operate in Mexico: nozzles, stop valves, blade bosses, labyrinth seals and rotor disc; using tools of of Computational Fluid Dynamics (CFD). In these main elements of turbines a strong problem of erosion was registered that threatens the reliable operation of the turbines, its availability and its optimal yield. With base on the results of the numerical analyses, the design modifications of the different elements were developed from the flow channel of the steam turbines, in order to reduce the erosion and thus diminishing the energy losses and increasing the steam turbine efficiency. This work presents the main benefits that the Thermoelectric Power Plants obtain with the reduction of the erosion by solid particles that affect the critical components of steam turbines: extension of the period between maintenance, replacement of components, reduction of operation and maintenance costs of the turbines, and extension of the useful life of the main components. [Spanish] Se presenta el analisis de erosion por particulas solidas de diferentes elementos del canal de flujo de las turbinas de vapor que operan en Mexico: toberas, valvula de paro, tetones de los alabes, sellos de laberinto y disco del rotor; utilizando herramientas de Dinamica de Fluidos Computacional (DFC). En estos elementos principales de turbinas se registro un fuerte problema de erosion que amenaza la operacion confiable de las turbinas, su disponibilidad y su rendimiento optimo. Con base en los resultados de los analisis numericos, se desarrollaron las modificaciones de diseno de los diferentes elementos del canal de flujo de las turbinas de vapor, con el proposito de reducir la erosion y asi, disminuir las perdidas de energia e incrementar el rendimiento de las turbinas de vapor. Este trabajo presenta los principales beneficios que obtienen las Centrales Termoelectricas con la

  1. Numerical study on the effect of non-condensable gases on the bi-phasic flow in geothermal wells; Estudio numerico del efecto de gases incondensables sobre el flujo bifasico en pozos geotermicos

    Energy Technology Data Exchange (ETDEWEB)

    Santoyo Gutierrez, Edgar; Garcia Gutierrez, Alfonso; Santoyo Gutierrez, Socrates; Morales Rosas, Jose Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1993-09-01

    The objective of this paper is to describe a numerical study to determine the flow characteristics that predominate in geothermal wells and that produces a significant amount of non-condensable gases. It is known that these gases affect the thermodynamic conditions that dominate the fluid transport in the well or inclusively within the proper producing reservoir, therefore, it is extremely important to evaluate this effect. For this purpose the numerical model Geopozo V2.0 was developed. This model considers the carbon dioxide (CO{sub 2}) as the representative gas of the non-condensable gases present in the geothermal fluid. Due to this consideration, Geopozo V2.0 includes a methodology or the estimation of the thermodynamic and transport properties of geothermal fluids, considering these as a mix of two components: H{sub 2}O (vapor and liquid) and CO{sub 2}, under conditions of monophasic and biphasic flow. The application of Geopozo V2.0 for a typical case of flow in geothermal wells with high CO{sub 2} content revealed that the presence of this gas affects significantly the location of the flashing point inside the well and consequently, the amount of steam produced. This is of importance or the design and selection of the surface and generation equipment, aspect that to this date has been ignored (Suwana, 1991). [Espanol] El objetivo de este trabajo es describir un estudio numerico para determinar las caracteristicas del flujo que predominan en pozos geotermicos y que producen una cantidad significante de gases incondensables. Se tiene conocimiento de que estos gases afectan las condiciones termodinamicas que dominan el transporte de fluidos en el pozo o incluso dentro del mismo yacimiento geotermico productor, por lo que es de suma importancia evaluar dicho efecto. Para ello fue desarrollado el modelo numerico Geopozo V2.0. Este modelo considera al dioxido de carbono (CO{sub 2}) como el gas representativo de los incondensables presentes en el fluido geotermico

  2. Contractibility of curves

    Directory of Open Access Journals (Sweden)

    Janusz Charatonik

    1991-11-01

    Full Text Available Results concerning contractibility of curves (equivalently: of dendroids are collected and discussed in the paper. Interrelations tetween various conditions which are either sufficient or necessary for a curve to be contractible are studied.

  3. ANALISIS PERIKANAN HUHATE DI PERAIRAN LARANTUKA, FLORES

    Directory of Open Access Journals (Sweden)

    Mohamad Adha Akbar

    2016-11-01

    Full Text Available Informasi mengenai beberapa aspek perikanan huhate sangat diperlukan sebagai bahan untuk perencanaan pengelolaan perikanan yang berkelanjutan. Penelitian ini dilakukan di Larantuka, Flores Timur pada tahun 2014 dengan tujuan untuk menganalisis perikanan huhate sebagai salah satu tulang punggung perikanan TCT. Kegiatan penelitian diprioritaskan pada analisis unit alat tangkap, daerah penangkapan, komposisi hasil tangkapan dan estimasi Total Faktor Produktivitas (TFP perikanan huhate. Basis data pengukuran adalah himpunan  data pendaratan dan observasi lapang. Hasil penelitian menunjukan bahwa karakteristik armada terdiri dari kapal yang terbuat dari fibreglass dengan kisaran bobot kapal 6 - 30 GT. Daerah penangkapan di sekitar perairan Laut Sawu dan Laut Flores. Hasil tangkapan utama didominansi oleh cakalang (Katsuwonus pelamis sebanyak 82%, juwana tuna (Thunnus spp. 17% dan tongkol (Auxis spp. 1% serta hasil tangkapan ikutan lemadang (Coryphaena hippurus dan marlin (Makaira spp. < 1%. Hasil analisis tangkapan per unit upaya (CPUE memberikan nilai rata-rata sebesar 1,1 ton/trip (0,4-1,7 ton/trip dengan nilai tertinggi terjadi pada Februari, sedangkan terendah terjadi pada Januari. Hasil penelitian menunjukkan terdapat hubungan yang signifikan antara tren bulanan CPUE dan nilai TFP.

  4. ANALISIS PENGELOLAAN LINGKUNGAN PERMUKIMAN DI KABUPATEN SOPPENG

    Directory of Open Access Journals (Sweden)

    Bakhrani Rauf

    2016-08-01

    Full Text Available Penelitian ini  bertujuan untuk mendeskripsikan pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 penyediaan dan penanganan lahan terbuka hijau (open space; (2 penyediaan dan penanganan drainase; (3  penanganan sampah; (4 penyediaan dan penanganan pembuangan veses (septic tank. Jenis penelitian ini adalah penelitian kuantitatif dengan pendekatan survei.  Sampel wailayah penelitian ini adalah satu RW di ibu kota kabupaten dan satu RW di desa yang dipilih dengan metode purpossive sampling,  yaitu RW yang sudah maju di ibu kota kabupaten dan RW yang tertinggal di desa. Responden sebanyak 50 kepala keluarga yakni masing-masing 25 kepala keuarga di setiap RW, dipilih dengan  systematic random sampling.  Teknik pengumpulan data yang dilakukan adalah melakukan observasi langsung dan dilengkapi dengan wawancara terhadap responden. Analisis yang digunakan adalah analisis deskriptif. Hasil penelitian menunjukkan bahwa pengelolaan lingkungan permukiman di Kabupaten Soppeng pada aspek: (1 ketersediaan dan penanganan lahan terbuka hijau (open space ditemukan belum memadai; (2 ketersediaan drainase (air kotor dan air hujan ditemukan belum memadai; (3 Penanganan sampahbelum memadai; dan (4 penanganan veses dan penyediaan septic tankbelum memadai.

  5. IDENTIFIKASI MISKONSEPSI SISWA SMP PADA KONSEP FOTOSINTESIS MELALUI ANALISIS GAMBAR

    Directory of Open Access Journals (Sweden)

    Devi Ariandini

    2014-01-01

    Full Text Available Tujuan dari penelitian ini adalah untuk mengidentifikasi miskonsepsi siswa dengan analisis menggambar. Tiga puluh empat siswa di kelas 8 di sekolah menengah pertama digunakan sebagai subyek dalam penelitian ini. Teknik sampel menggunakan teknik purposive sampling. Data yang diperlukan untuk penelitian ini dikumpulkan melalui kuesioner, menggambar analisis rubrik, dan wawancara. Identifikasi Kesalahpahaman ditentukan dengan menggambar siswa berdasarkan menggambar kriteria klasifikasi oleh Kose (2008. Siswa diperintahkan untuk menarik tentang konsep fotosintesis setelah proses pembelajaran. Gambar siswa dianalisis dengan rubrik dan setelah itu mereka diwawancarai. Hasil penelitian menunjukkan tidak semua tingkat kriteria menggambar dari tingkat 1 sampai 5 diidentifikasi. Dari hasil analisa, gambar paling banyak ditemukan adalah pada tingkat 4. Gambar pada tingkat 4 dikategorikan sebagai gambar lengkap konsep fotosintesis dan tidak ada kesalahpahaman ditemukan. Berdasarkan gambar mereka, ada siswa 2,9% diidentifikasi yang diselenggarakan kesalahpahaman. Ada perbedaan jumlah siswa yang diadakan kesalahpahaman antara gambar hasil analisis dan hasil wawancara. Dari hasil wawancara, ada siswa 35,2% dimiliki kesalahpahaman, lebih dari menggambar hasil analisis. Ini berarti bahwa identifikasi kesalahpahaman melalui analisis gambar tidak efektif. Kesalahpahaman siswa yang paling sering terjadi pada konsep fotosintesis adalah tempat berlangsungnya fotosintesis. Faktor yang membuat kesalahpahaman siswa yaitu karena siswa itu sendiri dan lingkungannya. Kata Kunci: fotosintesis, kesalahpahaman, konsep, menggambar analisis

  6. RELIEVE: A FORTRAN 77 program for numerical and graphical processing of digital topographic maps; RELIEVE: Un programa FORTRAN para procesamiento numerico y grafico de mapas topograficos digitalizados

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, J.J.; Gorostiza, C.

    1995-12-01

    The RELIEVE program was developed in order to its integration with the expert system SIRENAS, in the frame of the Industrial Risks Programme, within the CIEMAT center. For accomplishing this mentioned system, arose the necessity of an additional component unable for analyzing the topography (relieve) of the territory in which the focused site is located. That one is just the mission of the RELIEVE program. Basically RELIEVE analyses the digitalized data points of a determined topographic area, around a location of interest. The program allows us estimation by numerical techniques, using IMSL library, of the deep width, and other geometrical characteristics of the valley that are involved in. Optionally RELIEVE produces also graphical outputs concerning 3D representation of topographical map, level curves, sections of interest considered in the valley, etc., by means of the DISSPLA II library, running in the IBM system of the CIEMAT. (Author)

  7. RELIEVE: A FORTRAN 77 program for numerical and graphical processing of digital topographic maps; RELIEVE: Un programa FORTRAN para procesamiento numerico y grafico de mapas topograficos digitalizados

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, J.J.; Gorostiza, C.

    1995-07-01

    The RELIEVE program was developed in order to its integration with the expert system SIRENAS, in the frame of the Industrial Risks Programme, within the CIEMAT center. For accomplishing this mentioned system, arose the necessity of an additional component enabled for analyzing the topography (relieve) of the territory in which the focused site is located. That is just the mission of the RELIEVE program. Basically RELIEVE analyses the digitalized data points of a determinate topographic area, around a location of interest. The program allows us estimation by numerical techniques, using IMSL library, of the deep width, and other geometrical characteristics of the valley that is involved in. Optionally RELIEVE produces also graphical outputs concerning 3D representation of topographical map, level curves, sections of interest considered in the valley, etc., by means of the DISSPLA II library, running in the IBM system of the CIEMAT. (Author) 5 refs.

  8. Analisis Tingkat Kepentingan Dan Kinerja Layanan Automated Teller Machine (Atm) Bank Mandiri

    OpenAIRE

    Setiawati, Lenny; Sugiharto, Toto

    2008-01-01

    Penelitian ini ditujukan untuk menganalisis tingkat kepentingan dan kinerja layananATM Bank Mandiri. Analisis Servqual yang terdiri atas dimensi tangible, realibility,responsiveness, assurance,dan empathy digunakan untuk menganalisis kinerjalayanan ATM. Sementara itu, Customer Satisfaction Index dan ImportancePerformance Analysis yang terdiri atas analisis kuadran dan analisis kesenjangandigunakan untuk menginvestigasi kepuasan pelanggan dan untuk mengidentifikasikandimensi layanan yang kiner...

  9. JUMPING THE CURVE

    Directory of Open Access Journals (Sweden)

    René Pellissier

    2012-01-01

    Full Text Available This paper explores the notion ofjump ing the curve,following from Handy 's S-curve onto a new curve with new rules policies and procedures. . It claims that the curve does not generally lie in wait but has to be invented by leadership. The focus of this paper is the identification (mathematically and inferentially ofthat point in time, known as the cusp in catastrophe theory, when it is time to change - pro-actively, pre-actively or reactively. These three scenarios are addressed separately and discussed in terms ofthe relevance ofeach.

  10. ANALISIS VARIABEL KEUANGAN YANG MEMPENGARUHI KEBIJAKAN DEVIDEN

    Directory of Open Access Journals (Sweden)

    Sumiadji -

    2012-03-01

    Full Text Available Penelitian ini dilakukan untuk menguji pengaruh variabel keuangan yang terdiri dari: rasio pro-fitabilitas (return on assets, likuiditas (cash ratio, rasio hutang (debt to equity ratio, market value (earnings per share, dan perputaran total aset (total assets turnover terhadap kebijakan dividen yang diproksikan dengan dividend payout ratio (DPR pada perusahaan manufaktur yang terdaftar di Bursa Efek Indonesia tahun 2004-2008. Prosedur pemilihan sampel penelitian menggunakan purposive sampling sehingga menghasilkan 8 perusahaan yang memenuhi kriteria sampel. Data sekunder dikumpulkan dengan teknik dokumentasi bersumber dari Indonesian Capital Market Directory (ICMD, laporan keuangan, dan hasil Rapat Umum Pemegang Saham (RUPS. Teknik analisis yang digunakan dalam penelitian ini adalah analisis regresi linear berganda. Hasil penelitian ini adalah secara simultan variabel ROA, CR, DER, EPS dan TATO berpengaruh terhadap DPR. Secara parsial variabel yang mempengaruhi DPR adalah CR, EPS dan TATO. Varabel lainnya, yaitu ROA dan DER ditemukan tidak berpengaruh terhadap DPR. This research was conducted to examine the influence of the financial variables which consists of: return on assets (ROA, cash ratio (CR, debt to equity ratio (DER, earnings per share (EPS, and total asset turnover (TATO to the dividend policy that indicated by the dividend payout ratio (DPR of listed manufacturing company in Indonesia Stock Exchange  2004 to 2008. The sample selection procedure used was a purposive sampling so that it produced eight companies that met the sample criteria. Se-condary data was collected by the documentation technique were obtained from the Indonesian Capital Market Directory (ICMD, financial statements, and the results of the Annual General Meeting of Shareholders. The analysis technique used was multiple linear regression analysis. The research found that five variables of kind of ROA, CR, DER, EPS dan TATO simultaneously influence to dividend

  11. Tornado-Shaped Curves

    Science.gov (United States)

    Martínez, Sol Sáez; de la Rosa, Félix Martínez; Rojas, Sergio

    2017-01-01

    In Advanced Calculus, our students wonder if it is possible to graphically represent a tornado by means of a three-dimensional curve. In this paper, we show it is possible by providing the parametric equations of such tornado-shaped curves.

  12. Simulating Supernova Light Curves

    International Nuclear Information System (INIS)

    Even, Wesley Paul; Dolence, Joshua C.

    2016-01-01

    This report discusses supernova light simulations. A brief review of supernovae, basics of supernova light curves, simulation tools used at LANL, and supernova results are included. Further, it happens that many of the same methods used to generate simulated supernova light curves can also be used to model the emission from fireballs generated by explosions in the earth's atmosphere.

  13. Simulating Supernova Light Curves

    Energy Technology Data Exchange (ETDEWEB)

    Even, Wesley Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dolence, Joshua C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-05

    This report discusses supernova light simulations. A brief review of supernovae, basics of supernova light curves, simulation tools used at LANL, and supernova results are included. Further, it happens that many of the same methods used to generate simulated supernova light curves can also be used to model the emission from fireballs generated by explosions in the earth’s atmosphere.

  14. Image scaling curve generation

    NARCIS (Netherlands)

    2012-01-01

    The present invention relates to a method of generating an image scaling curve, where local saliency is detected in a received image. The detected local saliency is then accumulated in the first direction. A final scaling curve is derived from the detected local saliency and the image is then

  15. Image scaling curve generation.

    NARCIS (Netherlands)

    2011-01-01

    The present invention relates to a method of generating an image scaling curve, where local saliency is detected in a received image. The detected local saliency is then accumulated in the first direction. A final scaling curve is derived from the detected local saliency and the image is then

  16. Tempo curves considered harmful

    NARCIS (Netherlands)

    Desain, P.; Honing, H.

    1993-01-01

    In the literature of musicology, computer music research and the psychology of music, timing or tempo measurements are mostly presented in the form of continuous curves. The notion of these tempo curves is dangerous, despite its widespread use, because it lulls its users into the false impression

  17. The curve shortening problem

    CERN Document Server

    Chou, Kai-Seng

    2001-01-01

    Although research in curve shortening flow has been very active for nearly 20 years, the results of those efforts have remained scattered throughout the literature. For the first time, The Curve Shortening Problem collects and illuminates those results in a comprehensive, rigorous, and self-contained account of the fundamental results.The authors present a complete treatment of the Gage-Hamilton theorem, a clear, detailed exposition of Grayson''s convexity theorem, a systematic discussion of invariant solutions, applications to the existence of simple closed geodesics on a surface, and a new, almost convexity theorem for the generalized curve shortening problem.Many questions regarding curve shortening remain outstanding. With its careful exposition and complete guide to the literature, The Curve Shortening Problem provides not only an outstanding starting point for graduate students and new investigations, but a superb reference that presents intriguing new results for those already active in the field.

  18. ANALISIS VARIABILITAS CURAH HUJAN DAN SUHU DI BALI

    Directory of Open Access Journals (Sweden)

    Ogi Setiawan

    2017-01-01

    Full Text Available Indonesia sebagai negara kepulauan yang terdiri dari pulau-pulau besar dan kecil menjadi sangat rentan terhadap dampak perubahan iklim. Salah satu pulau yang juga rentan terhadap perubahan iklim adalah pulau Bali. Dampak potensial adanya perubahan iklim adalah perubahan pola hujan, peningkatan suhuudaradankenaikanpermukaanlaut. Sektoryangakanmenerimadampakperubahaniklimdengan serius adalah sektor kehutanan dan pertanian. Untuk mendukung upaya mitigasi dan adaptasi maka diperlukan informasi perubahan iklim yang terjadi. Penelitian ini bertujuan untuk mengetahui variabilitas iklim di Bali. Metode yang digunakan adalah analisis kecenderungan curah hujan, analisis perubahan suhu udara, analisis perubahan tipe iklim dan analisis pergeseran bulan basah, lembab dan kering. Data hujan yang digunakan adalah data hujan dari GPCC (1961-1998 dan BMKG Bali (19992008, sedangkan data suhu berasal dari BMKG Bali (2004-2008. Hasil analisis menunjukkan bahwa di pulau Bali secara umum sudah mengalami perubahan iklim. Tipe iklim berdasarkan Schmidt-Ferguson mengalami perubahan dari relatif basah menjadi agak kering. Suhu udara rata-rata bulanan serta curah hujan bulanan dan tahunan memiliki kecenderungan yang semakin meningkat. Bulan basah dan bulan kering telah mengalami pergeseran dan perubahan jumlahnya. Dampak perubahan iklim terhadap ekosistem hutan di Bali belum diketahui dengan pasti, namun terdapat beberapa implikasi perubahan iklim terhadap sektor kehutanan diantaranya kebakaran hutan dan perubahan jadwal penanaman.

  19. Learning Curve? Which One?

    Directory of Open Access Journals (Sweden)

    Paulo Prochno

    2004-07-01

    Full Text Available Learning curves have been studied for a long time. These studies provided strong support to the hypothesis that, as organizations produce more of a product, unit costs of production decrease at a decreasing rate (see Argote, 1999 for a comprehensive review of learning curve studies. But the organizational mechanisms that lead to these results are still underexplored. We know some drivers of learning curves (ADLER; CLARK, 1991; LAPRE et al., 2000, but we still lack a more detailed view of the organizational processes behind those curves. Through an ethnographic study, I bring a comprehensive account of the first year of operations of a new automotive plant, describing what was taking place on in the assembly area during the most relevant shifts of the learning curve. The emphasis is then on how learning occurs in that setting. My analysis suggests that the overall learning curve is in fact the result of an integration process that puts together several individual ongoing learning curves in different areas throughout the organization. In the end, I propose a model to understand the evolution of these learning processes and their supporting organizational mechanisms.

  20. The crime kuznets curve

    OpenAIRE

    Buonanno, Paolo; Fergusson, Leopoldo; Vargas, Juan Fernando

    2014-01-01

    We document the existence of a Crime Kuznets Curve in US states since the 1970s. As income levels have risen, crime has followed an inverted U-shaped pattern, first increasing and then dropping. The Crime Kuznets Curve is not explained by income inequality. In fact, we show that during the sample period inequality has risen monotonically with income, ruling out the traditional Kuznets Curve. Our finding is robust to adding a large set of controls that are used in the literature to explain the...

  1. Bond yield curve construction

    Directory of Open Access Journals (Sweden)

    Kožul Nataša

    2014-01-01

    Full Text Available In the broadest sense, yield curve indicates the market's view of the evolution of interest rates over time. However, given that cost of borrowing it closely linked to creditworthiness (ability to repay, different yield curves will apply to different currencies, market sectors, or even individual issuers. As government borrowing is indicative of interest rate levels available to other market players in a particular country, and considering that bond issuance still remains the dominant form of sovereign debt, this paper describes yield curve construction using bonds. The relationship between zero-coupon yield, par yield and yield to maturity is given and their usage in determining curve discount factors is described. Their usage in deriving forward rates and pricing related derivative instruments is also discussed.

  2. SRHA calibration curve

    Data.gov (United States)

    U.S. Environmental Protection Agency — an UV calibration curve for SRHA quantitation. This dataset is associated with the following publication: Chang, X., and D. Bouchard. Surfactant-Wrapped Multiwalled...

  3. Bragg Curve Spectroscopy

    International Nuclear Information System (INIS)

    Gruhn, C.R.

    1981-05-01

    An alternative utilization is presented for the gaseous ionization chamber in the detection of energetic heavy ions, which is called Bragg Curve Spectroscopy (BCS). Conceptually, BCS involves using the maximum data available from the Bragg curve of the stopping heavy ion (HI) for purposes of identifying the particle and measuring its energy. A detector has been designed that measures the Bragg curve with high precision. From the Bragg curve the range from the length of the track, the total energy from the integral of the specific ionization over the track, the dE/dx from the specific ionization at the beginning of the track, and the Bragg peak from the maximum of the specific ionization of the HI are determined. This last signal measures the atomic number, Z, of the HI unambiguously

  4. ROBUST DECLINE CURVE ANALYSIS

    Directory of Open Access Journals (Sweden)

    Sutawanir Darwis

    2012-05-01

    Full Text Available Empirical decline curve analysis of oil production data gives reasonable answer in hyperbolic type curves situations; however the methodology has limitations in fitting real historical production data in present of unusual observations due to the effect of the treatment to the well in order to increase production capacity. The development ofrobust least squares offers new possibilities in better fitting production data using declinecurve analysis by down weighting the unusual observations. This paper proposes a robustleast squares fitting lmRobMM approach to estimate the decline rate of daily production data and compares the results with reservoir simulation results. For case study, we usethe oil production data at TBA Field West Java. The results demonstrated that theapproach is suitable for decline curve fitting and offers a new insight in decline curve analysis in the present of unusual observations.

  5. ANALISIS SPASIAL KEJADIAN DEMAM BERDARAH DENGUE BERDASARKAN KEPADATAN PENDUDUK

    Directory of Open Access Journals (Sweden)

    Agcrista Permata Kusuma

    2016-01-01

    Full Text Available Abstrak Puskesmas Kedungmundu merupakan wilayah endemis DBD dengan kasus yang tinggi. Diperlukan upaya dalam menentukan kebijakan strategi pengendalian vektor secara efektif dan efisien. Analisis spasial dalam SIG dapat digunakan untuk mengetahui pola penyebaran dan daerah potensi penularan DBD. Jenis penelitian ini adalah penelitian deskriptif analitik menggunakan pendekatan cross sectional. Teknik pengambilan sampel menggunakan sampel wilayah memperhatikan proporsi sampel dengan jumlah sampel 146 responden. Pengambilan titik koordinat menggunakan GPS. Analisis data menggunakan analisis univariat dan analisis spasial. Hasil perhitungan statistik spasial ANN diperoleh nilai Z-score = -11,054 terdapat pola spasial kasus DBD di wilayah kerja Puskesmas Kedungmundu. Nilai ANN = 0,52 < 1, artinya pola penyebaran kejadian DBD yang terjadi adalah berkerumun. Kesimpulan dalam penelitian ini sebaran kasus DBD memiliki keterkaitan secara spasial dengan kepadatan penduduk. Abstract Kedungmundu PHC is an endemich region with a high case. Be required to determine policy of vector control strategies effectively and efficiently. Spatial analsys in GIS can be used to determine the pattern of distribution and areas of DHF potential transmission. The type this research was analysis descriptive with cross sectional approach. The sampling technique used a sample area of attention to the proportion of the sample with 146 respondents of total sample. Capturing the coordinates used GPS. Data analisys used univariat and spatial analisys. Result of ANN obtained a Z-score= -11,054, there was a spatial pattern of dengue cases in Kedungmundu PHC. ANN value = 0,52 < 1, it meant that the pattern of DHF distribution was clustered. The conclution of this research was DHF distribution cases has spatial correlation with density population.

  6. Power Curve Measurements FGW

    DEFF Research Database (Denmark)

    Georgieva Yankova, Ginka; Federici, Paolo

    This report describes power curve measurements carried out on a given turbine in a chosen period. The measurements are carried out in accordance to IEC 61400-12-1 Ed. 1 and FGW Teil 2.......This report describes power curve measurements carried out on a given turbine in a chosen period. The measurements are carried out in accordance to IEC 61400-12-1 Ed. 1 and FGW Teil 2....

  7. Curves and Abelian varieties

    CERN Document Server

    Alexeev, Valery; Clemens, C Herbert; Beauville, Arnaud

    2008-01-01

    This book is devoted to recent progress in the study of curves and abelian varieties. It discusses both classical aspects of this deep and beautiful subject as well as two important new developments, tropical geometry and the theory of log schemes. In addition to original research articles, this book contains three surveys devoted to singularities of theta divisors, of compactified Jacobians of singular curves, and of "strange duality" among moduli spaces of vector bundles on algebraic varieties.

  8. ANALISIS GEN HAEMAGGLUTININ PADA VIRUS CAMPAK LIAR

    Directory of Open Access Journals (Sweden)

    Subangkit Subangkit

    2015-05-01

    Full Text Available AbstrakPenyakit Campak disebabkan oleh virus campak yang termasuk genus Morbilivirus dan Family Paramyxoviridae. Penyakit campak masih menjadi masalah kesehatan karena masih ditemukan Kejadian Luar Biasa (KLB di Indonesia. Salah satu penyebab terjadinya KLB tersebut diduga sebagaiakibat perbedaan antigenesitas antara strain vaksin yang digunakan dengan strain virus campak liar yang beredar di Indonesia. Penelitian ini bertujuan mendapatkan gambaran tentang karakteristik genetik gen Haemagglutinin virus campak liar yang ada di Indonesia. Spesimen yang digunakan sebanyak 27 isolat virus penyebab KLB dari 17 propinsi selama periode tahun 2003-2010. Isolat virus dilakukan pemeriksaan secara RT-PCR dan sekuensing dengan metode Sanger. Hasil sekuensing dianalisis dengan menggunakan perangkat lunak Bioedit 7.0 dan MEGA 4.0. Hasil penelitian didapatkan perbedaan 10 asam amino antara virus campak strain vaksin CAM-70 dan virus campak liar pada posisi D416N; K424T; V451M; N455T; V466I; I473T; F476L; Y481S atau Y481N; H495N; G505D. Kesimpulan penelitian ini adalah terdapat perbedaan karakteristik genetik antara virus campak liar di Indonesia berbeda dengan strain virus vaksin CAM-70.Kata kunci : Campak, Analisis Molekuler, Hemagglutinin, CD46AbstractMeasles is caused by virus belonging to the genus Morbilivirus and Family Paramyxoviridae. Measles is still a public health problem because outbreak of measles still found in Indonesia. Outbreak is suspected as a result of differences in antigenicity between vaccine strains used with wild-type measles virus strains circulating in Indonesia. This study aims to get genetic characteristics of wild-type measles virus haemagglutinin gene in Indonesia. The specimens were used 27 viral isolates from 17 provinces period 2003-2010. Viral isolates examined by RT-PCR and sequencing with Sanger method. Sequencing analysis were conducted using Bioedit 7.0 and MEGA 4.0 software. The results showed 10 amino acid differences

  9. Analisis Kelayakan Finansial Usaha Budidaya Bambu

    Directory of Open Access Journals (Sweden)

    Husnul Khotimah

    2015-12-01

    Full Text Available Budidaya bambu diperlukan untuk menambah populasi bambu yang cenderung berkurang yang disebabkan oleh beralihnya fungsi lahan yang digunakan untuk pemukiman atau diganti dengan komoditi tanaman lain yang dianggap lebih menguntungkan. Sementara itu kebutuhan bahan baku bambu terus meningkat sejalan dengan pertumbuhan penduduk dan perkembangan kemajuan ilmu pengetahuan. Budidaya bambu bermanfaat selain untuk menjaga ketersediaan suplai juga untuk meningkatkan kualitas bambu untuk memenuhi permintaan pasar. Tulisan ini mengkaji analisis finansial dari penanaman bambu. Kajian finansial dibutuhkan untuk menunjukkan bahwa upaya penanaman atau budidaya bambu ini layak atau tidak secara finansial untuk dilakukan. Data yang digunakan adalah data hasil penelitian di perusahaan perkebunan bambu PT XYZ di Lampung. Hasil penelitian menunjukkan bahwa nilai NPV (Rp 36.644.364,08 lebih besar dari nol, Net B/C (2,56 lebih besar dari satu, IRR (11 % lebih besar dari suku bunga 6 %, serta payback period pada tahun ke-9 umur proyek 15 tahun. Berdasarkan kriteria indikator kelayakan finansial dapat disimpulkan bahwa usaha budidaya bambu layak secara finansial untuk diusahakan. Katakunci: Hasil Hutan Bukan Kayu (HHBK, budidaya bambu, studi kelayakan, analisis finansial   Financial analysis and feasibity study of bamboo cultivation  Abstract Bamboo cultivation is necessary to increase the population of bamboo clumps. The bamboo clumps tend to decrease due to the shift of used lands for residential or replaced by other crop comodities, which are considered more profitable. On the other hand, the need of bamboo for raw materials remain increase in line with population growth and the development of science. The important of the bamboo cultivation are to maintain the availability of its supply and to improve the quality of bamboo, which meet the market demands. This paper examined financial analysis of bamboo cultivation. Financial study was necessary to show whether

  10. Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

    Directory of Open Access Journals (Sweden)

    I Gusti Ayu Made Srinadi

    2014-06-01

    Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

  11. Analisis Korelasi Kanonik Hubungan Perilaku Pemimpin dan Motivasi Kerja Karyawan

    Directory of Open Access Journals (Sweden)

    I Gusti Ayu Made Srinadi

    2015-04-01

    Full Text Available Kualitas pemimpin merupakan penentu keberhasilan organisasi yang dipimpin. Hubungan antara pemimpin dengan karyawannya merupakan hubungan saling ketergantungan yang umumnya tidak seimbang. Dalam proses interaksi yang terjadi antara pemimpin dan karyawan, berlangsung proses saling memengaruhi. Penelitian ini bertujuan untuk mencari hubungan perilaku pemimpin terhadap motivasi kerja karyawan dengan menggunakan analisis korelasi kanonik. Pengujian dengan menggunakan analisis korelasi kanonik menunjukkan bahwa perilaku pemimpin dengan motivasi karyawan memiliki keeratan hubungan dengan nilai korelasi kanonik sebesar 0,9058533. Faktor perilaku pemimpin yang paling tinggi berkorelasi dengan motivasi kerja karyawan di McDonald’s Kuta Beach adalah faktor kemampuan mengarahkan dan menghadapi karyawan dengan nilai korelasi yaitu sebesar 0,7619707.

  12. Analisis Aliran Daya Berbasis Injeksi Arus dalam Bentuk Vektor

    Directory of Open Access Journals (Sweden)

    Ahmad Wira Satriawan

    2017-11-01

    Full Text Available Tulisan ini memaparkan hasil penelitian yang telah dilakukan untuk membandingkan metode analisis aliran daya berbasis injeksi arus dalam bentuk vektor dengan format polar dan rektangular. Penelitian ini dilakukan untuk memperoleh metode analisa aliran daya dengan perhitungan yang lebih cepat dan akurat, serta iterasi yang lebih sedikit. Metode iterasi Newton Raphson diadopsi dalam penelitian ini dan bahasa pemrograman Python serta library komputasinya digunakan. Analisis terhadap karakteristik konvergensi dari kedua format dilakukan pada IEEE 14-bus Test System. Dari penelitian ini diperoleh hasil bahwa format rektangular lebih unggul dibandingkan format polar untuk kasus yang diteliti.

  13. ANALISIS FAKTOR KEHADIRAN DOSEN DI UNIVERSITAS X

    Directory of Open Access Journals (Sweden)

    Annisa Mulia Rani

    2016-10-01

    Full Text Available Aspek kualitas pekerjaan berkaitan langsung dengan waktu yang khusus digunakan dosen untuk mengembangkan kemampuan. Maka untuk merealisasikan kualitas dosen yang terbaik , pihak manajemen khusunya dekan membuat peraturan untuk kehadiran dosen adalah minimal 25 jam/minggu. Dengan peraturan ini diharapkan dosen dapat melaksanakan beban kerja dosen sebaik-baiknya. Peraturan ini tertulis dan tertuang pada SK Dekan No 20/2006 pada kampus X. Dengan Menggunakan Analisis faktor mencoba menemukan hubungan atar sejumlah variable-variabel yang awalnya saling independen satu dengan yang lain dimana variable penyebab kekurangan jam dosen datang/minggu adalah keluaraga, manajemen, hubungan social, fasilitas pengajaran, jarak/lokasi, kompensasi transport. Berdasarkan uji Bartley test dan Measure sample of adequate yang pertama maka dengan nilai sig 0.04 dan msa 0.540 . Dengan menggunakan metode principal component analysis maka pembentukan factor hanya ada 1 componen karena nilai eigen value yang mempunyai nilai diatas 1. Faktor pembentuk baru yaitu manajemen, kompensasi dan jarak menjadi satu component.

  14. Analisis Gameplay Game Genre Virtual Pet

    Directory of Open Access Journals (Sweden)

    Abi Senoprabowo

    2015-02-01

    Full Text Available Game adalah struktur interaktif yang membuat pemain berjuang menuju sebuah tujuan. Game dapat memberikan emosi dan mood, menghubungkan dengan orang latihan, sarana latihan, serta dapat memberikan edukasi. Salah satu game yang berkembang saat ini adalah game bergenre Virtual pet. Game virtual pet merupakan game simulasi memelihara sesuatu. Virtual pet memiliki gameplay yang menarik dan menyenangkan yang membuat pemain seolah-olah benar-benar memiliki binatang peliharaan mereka sendiri. Virtual pet dianggap oleh sebagian besar penggunanya dapat memberikan kegembiraan serta rasa kasih sayang karena tingkat interaksinya yang baik. Banyak pengembang game pemula yang mengembangkan genre ini sebagai game yang mereka buat karena kemudahaan dan tingkat penggunanya yang banyak. Akan tetapi banyak dari pengembang game pemula tidak memperhatikan tingkat keberlanjutan game virtual pet yang mereka buat sehingga membuat pemain cepat bosan. Pada penelitian ini, analisis game bergenre virtual pet yang sudah sukses dibuat seperti Zombigotchi, Tamagotchi Unicorn, dan Bird Land, diharapkan dapat membantu para pengembang game pemula agar mengetahui cara merancang dan mengembangkan game virtual pet dengan baik. Kata Kunci: game, gameplay, virtual pet

  15. ANALISIS MODEL KEPUASAN TERHADAP PEMBELIAN ULANG

    Directory of Open Access Journals (Sweden)

    Naili Farida

    2014-09-01

    Full Text Available Tujuan penelitian ini yaitu untuk menguji pengaruh brand equity, nilai pelanggan dan lifestyle yang dimediasi kepuasan konsumen terhadap pembelian ulang produk gadget di Kota Semarang. Responden dalam penelitian ini adalah seluruh konsumen yang telah melakukan pembelian produk gadget merek Samsung, sebanyak 120 orang. Teknik sampling yang digunakan yaitu purposive sampling. Teknik analisis yang digunakan yaitu Partial Least Square (PLS. Hasil penelitian menunjukkan bahwa terdapat pengaruh brand equity terhadap kepuasan, namun dalam konteks lifestyle dan nilai pelanggan tidak ada pengaruh terhadap kepuasan. Sedangkan kepuasan menunjukkan adanya pengaruh terhadap pembelian ulang. Diharapkan dari hasil penelitian ini mampu meningkatkan pembelian ulang melalui brand equity, lifestyle dan nilai pelanggan dalam konteks kepuasan. The objective of the research was to test the influence of brand equity, customer value and lifestyle which were mediated by consumer satisfaction toward re-purchasing of gadget products in Semarang. The respondents of the study were all consumers who have purchased Samsung gadget products. It was a purposive sampling study with 120 respondents. The data were analyzed by Partial Least Square (PLS. The result of the study showed that there was an influence of brand equity toward satisfaction, but in the lifestyle context and customer value did not give any influence toward satisfaction. Whereas; the satisfaction gave influence toward re-purchase. It is expected that this study can increase the repurchasethrough brand equity, lifestyle and customer values in the satisfaction context.

  16. Approximation by planar elastic curves

    DEFF Research Database (Denmark)

    Brander, David; Gravesen, Jens; Nørbjerg, Toke Bjerge

    2016-01-01

    We give an algorithm for approximating a given plane curve segment by a planar elastic curve. The method depends on an analytic representation of the space of elastic curve segments, together with a geometric method for obtaining a good initial guess for the approximating curve. A gradient......-driven optimization is then used to find the approximating elastic curve....

  17. Power Curve Measurements REWS

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Vesth, Allan

    This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here, the refere......This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here......, the reference wind speed used in the power curve is the equivalent wind speed obtained from lidar measurements at several heights between lower and upper blade tip, in combination with a hub height meteorological mast. The measurements have been performed using DTU’s measurement equipment, the analysis...

  18. Development of an analytic outline for the aflatoxins analysis in grains and flours; Desarrollo de un esquema analitico para el analisis de aflatoxinas en granos y harinas

    Energy Technology Data Exchange (ETDEWEB)

    Sibaja Adams, Roxana

    2000-07-01

    The instrumental and analytic conditions were optimized for the aflatoxine determination B1, B2, 1 and G2 in corn and peanut byl iquid chromatography of high discharge following the analyzing method AOAC 994,08. Besides, it was defined a function for evaluating the dependence of the chromatographic discharge with the aflatoxine concentration. The analyzing method was validated, and four calibration curves were obtained for the aflatoxine B1, B2, G1 and G2, which turned to have a heterocedastico behavior. The applicability of this method was demonstrated, obtaining imagines of appropriate merit and comparable with those reported by the AOAC. Additionally, the applicability of the chromatographic method was demonstrated in fine layer for the presumptive analysis of aflatoxine, allowing both methods to propose an outline of reliable analysis of real samples. [Spanish] Se optimizaron las condiciones instrumentales y analiticas para la determinacion de aflatoxinas B1, B2, G1 y G2 en maiz y mani por Cromatografia liquida de alto desempeno siguiendo el metodo de analisis AOAC 994,08. Ademas, se definio una funcion para evaluar la dependencia del desempeno cromatografico con la concentracion de aflatoxinas.Se valido el metodo de analisis y se obtuvieron las cuatro curvas de calibracion para las aflatoxinas B1, B2, G1 y G2, las que resultaron tener un comportamiento heterocedastico. Se demostro la aplicabilidad del metodo, obteniendose figuras de merito adecuadas y comparables con las reportadas por el AOAC.Adicionalmente, se demostro la aplicabilidad del metodo de cromatografia en capa fina para el analisis presuntivo de aflatoxinas, permitiendo ambos metodos proponer un esquema de analisis confiable de muestras reales.

  19. Curved electromagnetic missiles

    International Nuclear Information System (INIS)

    Myers, J.M.; Shen, H.M.; Wu, T.T.

    1989-01-01

    Transient electromagnetic fields can exhibit interesting behavior in the limit of great distances from their sources. In situations of finite total radiated energy, the energy reaching a distant receiver can decrease with distance much more slowly than the usual r - 2 . Cases of such slow decrease have been referred to as electromagnetic missiles. All of the wide variety of known missiles propagate in essentially straight lines. A sketch is presented here of a missile that can follow a path that is strongly curved. An example of a curved electromagnetic missile is explicitly constructed and some of its properties are discussed. References to details available elsewhere are given

  20. Algebraic curves and cryptography

    CERN Document Server

    Murty, V Kumar

    2010-01-01

    It is by now a well-known paradigm that public-key cryptosystems can be built using finite Abelian groups and that algebraic geometry provides a supply of such groups through Abelian varieties over finite fields. Of special interest are the Abelian varieties that are Jacobians of algebraic curves. All of the articles in this volume are centered on the theme of point counting and explicit arithmetic on the Jacobians of curves over finite fields. The topics covered include Schoof's \\ell-adic point counting algorithm, the p-adic algorithms of Kedlaya and Denef-Vercauteren, explicit arithmetic on

  1. IGMtransmission: Transmission curve computation

    Science.gov (United States)

    Harrison, Christopher M.; Meiksin, Avery; Stock, David

    2015-04-01

    IGMtransmission is a Java graphical user interface that implements Monte Carlo simulations to compute the corrections to colors of high-redshift galaxies due to intergalactic attenuation based on current models of the Intergalactic Medium. The effects of absorption due to neutral hydrogen are considered, with particular attention to the stochastic effects of Lyman Limit Systems. Attenuation curves are produced, as well as colors for a wide range of filter responses and model galaxy spectra. Photometric filters are included for the Hubble Space Telescope, the Keck telescope, the Mt. Palomar 200-inch, the SUBARU telescope and UKIRT; alternative filter response curves and spectra may be readily uploaded.

  2. ANALISIS KONTRIBUSI PAJAK HOTEL TERHADAP PENDAPATAN ASLI DAERAH KABUPATEN NUNUKAN

    OpenAIRE

    -, MULIATI

    2014-01-01

    2014 Analisis Kontribusi Pajak Hotel terhadap Pendapatan Asli Daerah Kabupaten Nunukan Analysis of The Contributions Tax on Hotel Againts Regional Renenue Nunukan District Muliati Haerial M. Christian Mangiwa Penelitian ini bertujuan untuk mengetahui seberapa besar kontribusi pajak hotel terhadap pendapatan asli daerah, mengetahui sistem pengawasan, dan potensi yang ada untuk meningkatkan pajak hotel, mengetahui sistem dan prosedur...

  3. Analisis Sektor/Sub Sektor Unggulan di Kabupaten Bungo

    Directory of Open Access Journals (Sweden)

    Gafur Gafur

    2016-03-01

    Full Text Available Abstract. This study aimed to analyze the leading sectors in Bungo. The method used is Location Quotient (LQ, Dynamic Location Quotient (DLQ, specialization index, Growth Ratio Model (MRP. Based on analysis of LQ and DLQ, there are only two basis sectors at present and in the future, namely the construction sector and trade, hotels and restaurants. Based on the analysis of Specialization Index, in Bungo Regency has a concentration of the economy in the agricultural sector and the manufacturing sector. Based on MRP analysis also showed that prominent sector growth at the level of Bungo and Jambi Province, namely electricity, gas and water supply; the building sector; and trade, hotels and restaurants. Keywords : Location Quotient (LQ, Dinamic Location Quotient (DLQ, Specialization Index, Growth Ratio Model   Abstrak. Penelitian ini bertujuan untuk menganalisis sektor unggulan di Kabupaten Bungo. Metode yang digunakan adalah analisis Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan (MRP. Berdasarkan analisis LQ dan DLQ,  hanya ada 2 sektor yang menjadi sektor basis pada saat ini dan pada masa yang akan datang yaitu sektor bangunan dan sektor perdagangan, hotel dan restoran. Berdasarkan analisis Indeks Spesialisasi, di Kabupaten Bungo telah terjadi konsentrasi ekonomi pada sektor pertanian dan sektor industri pengolahan. Berdasarkan analisis MRP juga dapat diketahui bahwa sektor yang menonjol pertumbuhannya pada tingkat Kabupaten Bungo dan Provinsi Jambi yaitu sektor listrik, gas dan air bersih; sektor bangunan; serta sektor perdagangan, hotel dan restoran. Kata Kunci : Location Quotient (LQ, Dinamic Location Quotient (DLQ, indeks spesialisasi, Model Rasio Pertumbuhan

  4. Learning from uncertain curves

    DEFF Research Database (Denmark)

    Mallasto, Anton; Feragen, Aasa

    2017-01-01

    We introduce a novel framework for statistical analysis of populations of nondegenerate Gaussian processes (GPs), which are natural representations of uncertain curves. This allows inherent variation or uncertainty in function-valued data to be properly incorporated in the population analysis. Us...

  5. Power Curve Measurements

    DEFF Research Database (Denmark)

    Federici, Paolo; Kock, Carsten Weber

    This report describes the power curve measurements performed with a nacelle LIDAR on a given wind turbine in a wind farm and during a chosen measurement period. The measurements and analysis are carried out in accordance to the guidelines in the procedure “DTU Wind Energy-E-0019” [1]. The reporting...

  6. Power Curve Measurements, FGW

    DEFF Research Database (Denmark)

    Vesth, Allan; Kock, Carsten Weber

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....

  7. Power Curve Measurements

    DEFF Research Database (Denmark)

    Federici, Paolo; Vesth, Allan

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....

  8. Power Curve Measurements

    DEFF Research Database (Denmark)

    Villanueva, Héctor; Gómez Arranz, Paula

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine...

  9. Carbon Lorenz Curves

    NARCIS (Netherlands)

    Groot, L.F.M.|info:eu-repo/dai/nl/073642398

    2008-01-01

    The purpose of this paper is twofold. First, it exhibits that standard tools in the measurement of income inequality, such as the Lorenz curve and the Gini-index, can successfully be applied to the issues of inequality measurement of carbon emissions and the equity of abatement policies across

  10. The Axial Curve Rotator.

    Science.gov (United States)

    Hunter, Walter M.

    This document contains detailed directions for constructing a device that mechanically produces the three-dimensional shape resulting from the rotation of any algebraic line or curve around either axis on the coordinate plant. The device was developed in response to student difficulty in visualizing, and thus grasping the mathematical principles…

  11. Nacelle lidar power curve

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Wagner, Rozenn

    This report describes the power curve measurements performed with a nacelle LIDAR on a given wind turbine in a wind farm and during a chosen measurement period. The measurements and analysis are carried out in accordance to the guidelines in the procedure “DTU Wind Energy-E-0019” [1]. The reporting...

  12. Power curve report

    DEFF Research Database (Denmark)

    Vesth, Allan; Kock, Carsten Weber

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  13. Textbook Factor Demand Curves.

    Science.gov (United States)

    Davis, Joe C.

    1994-01-01

    Maintains that teachers and textbook graphics follow the same basic pattern in illustrating changes in demand curves when product prices increase. Asserts that the use of computer graphics will enable teachers to be more precise in their graphic presentation of price elasticity. (CFR)

  14. ECM using Edwards curves

    NARCIS (Netherlands)

    Bernstein, D.J.; Birkner, P.; Lange, T.; Peters, C.P.

    2013-01-01

    This paper introduces EECM-MPFQ, a fast implementation of the elliptic-curve method of factoring integers. EECM-MPFQ uses fewer modular multiplications than the well-known GMP-ECM software, takes less time than GMP-ECM, and finds more primes than GMP-ECM. The main improvements above the

  15. Power Curve Measurements FGW

    DEFF Research Database (Denmark)

    Federici, Paolo; Kock, Carsten Weber

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine...

  16. ANALISIS KINERJA DENGAN MENGGUNAKAN PENDEKATAN RASIO CAMEL

    Directory of Open Access Journals (Sweden)

    Sri Murdiati

    2015-06-01

    Full Text Available Tujuan penelitian ini adalah untuk menganalisis tingkat kesehatan bank dilihat dari kategori CAMEL. Metode penelitian yang digunakan adalah studi kasus di PD BPR BKK Banjarharjo.Dalam menguji hipotesis digunakan alat analisis CAMEL. Hasil penelitian ini yaitu modal pada 2008 sampai 2010 termasuk dalam kriteria sehat. ROA meningkat 2008 sampai 2010 dengan kriteria sehat bagi biaya operasional yang dikeluarkan oleh pendapatan operasional yang seimbang. Rasio Kas tahun 2008 sampai 2010 termasuk dalam kriteria sehat berarti bank memiliki kemampuan untuk mengelola asset yang digunakan untuk membayar kewajiban. LDR mengalami tren yang signifikan selama tahun 2008 sampai 2010 sehingga dana yang diterima bank untuk meningkatkan baik tabungan, deposito berjangka, modal inti, yang berarti kemampuan bank untuk meningkatkan penyaluran kredit, IRR menunjukan nilai positif dalam menghadapi resiko pasar.Pengembangan tingkat kesehatan pada tahun 2008 sampai 2010 untuk komponen Capital, Assets, Laba dan Likuiditas meningkat. The goal of this research is to analyze the healtiness of banks seen from CAMEL category. The research applied a case study in PD BPR BKK Banjarharjo. The hypotheses tested using CAMEL analysis tools. The result of the study is that the modal used 2008 until 2010 is consideredin a healthy criteria. The increasing ROA in 2008 until 2010 is considered healthy criteria for operational expenses incurred by the operating income. Such condition meant that the banks are able to manage the assets which are used to pay the obligations. The significant increasing of LDR over the years 2008 until 2010 makes the received funds by the bank to increase the savings deposits, time deposits and the core capital. As the recunts, the banks are able to increase credit disstribution. More over, the IRR showed a positive values in the face of market risks and the development of healthy levels in 2008 until 2010 for the components of Capital, Assets, Earnings and

  17. Codes and curves

    CERN Document Server

    Walker, Judy L

    2000-01-01

    When information is transmitted, errors are likely to occur. Coding theory examines efficient ways of packaging data so that these errors can be detected, or even corrected. The traditional tools of coding theory have come from combinatorics and group theory. Lately, however, coding theorists have added techniques from algebraic geometry to their toolboxes. In particular, by re-interpreting the Reed-Solomon codes, one can see how to define new codes based on divisors on algebraic curves. For instance, using modular curves over finite fields, Tsfasman, Vladut, and Zink showed that one can define a sequence of codes with asymptotically better parameters than any previously known codes. This monograph is based on a series of lectures the author gave as part of the IAS/PCMI program on arithmetic algebraic geometry. Here, the reader is introduced to the exciting field of algebraic geometric coding theory. Presenting the material in the same conversational tone of the lectures, the author covers linear codes, inclu...

  18. Carbon Lorenz Curves

    Energy Technology Data Exchange (ETDEWEB)

    Groot, L. [Utrecht University, Utrecht School of Economics, Janskerkhof 12, 3512 BL Utrecht (Netherlands)

    2008-11-15

    The purpose of this paper is twofold. First, it exhibits that standard tools in the measurement of income inequality, such as the Lorenz curve and the Gini-index, can successfully be applied to the issues of inequality measurement of carbon emissions and the equity of abatement policies across countries. These tools allow policy-makers and the general public to grasp at a single glance the impact of conventional distribution rules such as equal caps or grandfathering, or more sophisticated ones, on the distribution of greenhouse gas emissions. Second, using the Samuelson rule for the optimal provision of a public good, the Pareto-optimal distribution of carbon emissions is compared with the distribution that follows if countries follow Nash-Cournot abatement strategies. It is shown that the Pareto-optimal distribution under the Samuelson rule can be approximated by the equal cap division, represented by the diagonal in the Lorenz curve diagram.

  19. Dynamics of curved fronts

    CERN Document Server

    Pelce, Pierre

    1989-01-01

    In recent years, much progress has been made in the understanding of interface dynamics of various systems: hydrodynamics, crystal growth, chemical reactions, and combustion. Dynamics of Curved Fronts is an important contribution to this field and will be an indispensable reference work for researchers and graduate students in physics, applied mathematics, and chemical engineering. The book consist of a 100 page introduction by the editor and 33 seminal articles from various disciplines.

  20. International Wage Curves

    OpenAIRE

    David G. Blanchflower; Andrew J. Oswald

    1992-01-01

    The paper provides evidence for the existence of a negatively sloped locus linking the level of pay to the rate of regional (or industry) unemployment. This "wage curve" is estimated using microeconomic data for Britain, the US, Canada, Korea, Austria, Italy, Holland, Switzerland, Norway, and Germany, The average unemployment elasticity of pay is approximately -0.1. The paper sets out a multi-region efficiency wage model and argues that its predictions are consistent with the data.

  1. Anatomical curve identification

    Science.gov (United States)

    Bowman, Adrian W.; Katina, Stanislav; Smith, Joanna; Brown, Denise

    2015-01-01

    Methods for capturing images in three dimensions are now widely available, with stereo-photogrammetry and laser scanning being two common approaches. In anatomical studies, a number of landmarks are usually identified manually from each of these images and these form the basis of subsequent statistical analysis. However, landmarks express only a very small proportion of the information available from the images. Anatomically defined curves have the advantage of providing a much richer expression of shape. This is explored in the context of identifying the boundary of breasts from an image of the female torso and the boundary of the lips from a facial image. The curves of interest are characterised by ridges or valleys. Key issues in estimation are the ability to navigate across the anatomical surface in three-dimensions, the ability to recognise the relevant boundary and the need to assess the evidence for the presence of the surface feature of interest. The first issue is addressed by the use of principal curves, as an extension of principal components, the second by suitable assessment of curvature and the third by change-point detection. P-spline smoothing is used as an integral part of the methods but adaptations are made to the specific anatomical features of interest. After estimation of the boundary curves, the intermediate surfaces of the anatomical feature of interest can be characterised by surface interpolation. This allows shape variation to be explored using standard methods such as principal components. These tools are applied to a collection of images of women where one breast has been reconstructed after mastectomy and where interest lies in shape differences between the reconstructed and unreconstructed breasts. They are also applied to a collection of lip images where possible differences in shape between males and females are of interest. PMID:26041943

  2. Estimating Corporate Yield Curves

    OpenAIRE

    Antionio Diaz; Frank Skinner

    2001-01-01

    This paper represents the first study of retail deposit spreads of UK financial institutions using stochastic interest rate modelling and the market comparable approach. By replicating quoted fixed deposit rates using the Black Derman and Toy (1990) stochastic interest rate model, we find that the spread between fixed and variable rates of interest can be modeled (and priced) using an interest rate swap analogy. We also find that we can estimate an individual bank deposit yield curve as a spr...

  3. LCC: Light Curves Classifier

    Science.gov (United States)

    Vo, Martin

    2017-08-01

    Light Curves Classifier uses data mining and machine learning to obtain and classify desired objects. This task can be accomplished by attributes of light curves or any time series, including shapes, histograms, or variograms, or by other available information about the inspected objects, such as color indices, temperatures, and abundances. After specifying features which describe the objects to be searched, the software trains on a given training sample, and can then be used for unsupervised clustering for visualizing the natural separation of the sample. The package can be also used for automatic tuning parameters of used methods (for example, number of hidden neurons or binning ratio). Trained classifiers can be used for filtering outputs from astronomical databases or data stored locally. The Light Curve Classifier can also be used for simple downloading of light curves and all available information of queried stars. It natively can connect to OgleII, OgleIII, ASAS, CoRoT, Kepler, Catalina and MACHO, and new connectors or descriptors can be implemented. In addition to direct usage of the package and command line UI, the program can be used through a web interface. Users can create jobs for ”training” methods on given objects, querying databases and filtering outputs by trained filters. Preimplemented descriptors, classifier and connectors can be picked by simple clicks and their parameters can be tuned by giving ranges of these values. All combinations are then calculated and the best one is used for creating the filter. Natural separation of the data can be visualized by unsupervised clustering.

  4. Analisis Pembiayaan Kesehatan Keluarga Penderita Talasemia

    Directory of Open Access Journals (Sweden)

    Arif Kurniawan

    2013-04-01

    Full Text Available Pembiayaan kesehatan sekitar 146 (60% penderita talasemia di Banyumas, tahun 2011 ditanggung rumah tangga dalam bentuk pembayaran langsung (out of pocket payment. Penelitian ini bertujuan untuk menganalisis ability to pay, willingness to pay, dan need assessment pembiayaan kesehatan penderita talasemia di Kabupaten Banyumas. Jenis penelitian ini adalah observasional analitik dengan rancangan studi kasus. Penelitian ini menggunakan desain studi cross sectional dengan teknik pengambilan sampel simple random sampling. Jumlah sampel penelitian 30 responden yang mempunyai anggota keluarga penderita talasemia di Kabupaten Banyumas. Hasil penelitian menunjukkan keluarga penderita talasemia mempunyai ability to pay rata-rata adalah Rp34.448,8/bulan dan rata-rata willingness to pay pengobatan talasemia adalah Rp133.833,3/ bulan. Pola pembiayaan kesehatan talasemia di Kabupaten Banyumas menggunakan 93,3% Jaminan Kesehatan Masyarakat (Jamkesmas, 3,3% biaya sendiri, dan 3,3% asuransi kesehatan. Sebelum mendapatkan Jamkesmas, 90,0% responden membayar dengan out of pocket, berhutang, berhemat pada kebutuhan nonkesehatan, dan menjual perhiasan/sawah. Kebutuhan pelayanan kesehatan yang diharapkan keluarga penderita talasemia adalah konsultasi talasemia dan desain khusus ruang perawatan anak. Kebutuhan pembiayaan kesehatan keluarga penderita talasemia adalah uang transportasi ke rumah sakit sebagai bentuk biaya tidak langsung. Health financing of majority thalassemia patients, around 146 people (60% in Banyumas year 2011 is assured by Households in direct payments to health care providers (out-of-pocket payment. This study aimed to analyze the ability to pay, willingness to pay, and need assessment of health financing thalassemia in Banyumas. This research an analytic observation- Analisis Pembiayaan Kesehatan Keluarga Penderita Talasemia Health Financing Analysis of Thalassemia Patient Family Arif Kurniawan, Arih Diyaning Intiasari al with case study design

  5. Uniformization of elliptic curves

    OpenAIRE

    Ülkem, Özge; Ulkem, Ozge

    2015-01-01

    Every elliptic curve E defined over C is analytically isomorphic to C*=qZ for some q ∊ C*. Similarly, Tate has shown that if E is defined over a p-adic field K, then E is analytically isomorphic to K*=qZ for some q ∊ K . Further the isomorphism E(K) ≅ K*/qZ respects the action of the Galois group GK/K, where K is the algebraic closure of K. I will explain the construction of this isomorphism.

  6. Analisis Komoditi Unggulan Subsektor Tanaman Pangan di Sumatera Utara Tahun 2010 – 2014

    OpenAIRE

    Sinaga, Terry Praganda

    2016-01-01

    Tujuan penelitian ini adalah untuk mengetahui perkembangan produksi komoditi tanaman pangan selama periode tersebut sehingga dapat menganalisis komoditi subsektor tanaman pangan yang menjadi unggulan di Sumatera Utara. Komoditi unggulan tersebut juga dijabarkan untuk setiap kabupatem/kota yang ada di Sumatera Utara. Metode yang digunakan yaitu secara Convenience Sampling, dan metode analisis data dengan menggunakan analisis Location Quotient. Hasil penelitian menyimpulkan ba...

  7. ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN

    OpenAIRE

    ARIANTY, ASTRI

    2012-01-01

    ANALISIS KINERJA KEUANGAN PERUSAHAAN PT. ASURANSI JIWASRAYA (PERSERO) CABANG SULAWESI SELATAN COMPANY FINANCIAL PERFORMANCE ANALYSIS PT. INSURANCE JIWASRAYA (LIMITED) SOUTH BRANCH SULAWESI Astri Arianty Prof. Dr. H. Muhammad Ali, SE., M.S Drs. Armayah Sida, M.Si Analisis terhadap kinerja keuangan perusahaan sangat penting dilakukan untuk mengetahui sejauh mana tingkat pencapaian yang telah diperoleh perusahaan sebagaimana tujuan perusahaan dalam menjalankan proses produk...

  8. Roc curves for continuous data

    CERN Document Server

    Krzanowski, Wojtek J

    2009-01-01

    Since ROC curves have become ubiquitous in many application areas, the various advances have been scattered across disparate articles and texts. ROC Curves for Continuous Data is the first book solely devoted to the subject, bringing together all the relevant material to provide a clear understanding of how to analyze ROC curves.The fundamental theory of ROC curvesThe book first discusses the relationship between the ROC curve and numerous performance measures and then extends the theory into practice by describing how ROC curves are estimated. Further building on the theory, the authors prese

  9. Identifiksi Sebaran Litologi berdasarkan Analisis Data Resistivitas di Gunung Wungkal

    OpenAIRE

    Nurul Dzakiya; MGS. Dwiki Nugraha; Nenden L. Sidik; Trias Galena

    2017-01-01

    Analisis data untuk mengidentifikasi sebaran litologi yang memiliki potensi bahan galian industri di Daerah Gunung Wungkal Yogyakarta dengan menggunakan metode resistivitas dan survei geologi permukaan telah dilakukan. Hasil korelasi kedua data tersebut menunjukkan sebaran litologi merupakan pelapukan intrusi batuan beku yang kemudian menghasilkan material lempung (6,0-10 m), lempung pasiran (11-30 m) dan lapukan batuan diorit (30-55 m) yang berada di kedalaman berbeda. Ketebalan batuan di pe...

  10. Analisis Sikap Konsumen terhadap Produk Fashion Lokal dan Impor

    OpenAIRE

    Setiawan, Evelyn

    2014-01-01

    Abstrak: Analisis Sikap Konsumen Terhadap Produk Fashion Lokal dan Impor. Penelitian ini bertujuan untuk menganalisis sikap konsumen terhadap produk fashion lokal dan impor yang akan berpengaruh terhadap keputusan konsumsi. Sampel yang akan digunakan dalam penelitian ini adalah 1.000 mahasiswa dari 10 perguruan tinggi swasta terbesar di Surabaya. Pengambilan data dilakukan dengan metode kuesioner. Hasil pengujian statistik menunjukkan bahwa sebagian besar mahasiswa di Surabaya merasa bangga d...

  11. Uso de Analisis de Covarianza (ANCOVA en investigacion cientifica.

    Directory of Open Access Journals (Sweden)

    Badii, M.H.

    2008-01-01

    Full Text Available The basics of the ANalisis of COVAriance (ANCOVA are given. The objectives and the application of ANCOVA are laid out. Techniques for the estimation of contrasts and for the control and reduction of the degree of error are discussed. The application of a simple ANCOVA using real data is highlighted. The application of this technique in fixing the auxiliary variable in experimentation is emphasized.

  12. Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan

    OpenAIRE

    Fachri, Yusrizal

    2017-01-01

    130306044 YUSRIZAL FACHRI, 2017. “Analisis Pemasaran Ayam Ras Pedaging di Pasar Tradisional Kota Medan”. Dibimbing oleh ARMYN HAKIM DAULAY dan NEVY DIANA HANAFI. Penelitian ini bertujuan untuk mengidentifikasi karakteristik lembaga pemasaran, bentuk saluran, fungsi pemasaran, dan menganalisis nilai tambah di lembaga-lembaga pemasaran ayam ras pedaging di pasar tradisional Kota Medan pada April sampai Mei 2017. Penelitian ini menggunakan data primer yang didapatkan dari observasi dan waw...

  13. Metode Pengumpulan dan Analisis Data : Lang Kah Vital Proses Penelitian

    OpenAIRE

    Suprapto, Agus .

    2005-01-01

    The process of data collection and. analysis is one of chains in scientific method that should be done in a research. This part later on will determine the right method in searching and analyzing a way in solving a problem. The data collected should be the ones which are relevant which the essence of research problems, so that the next interpreted data will eventually be concluded as valid. keywords: Pengumpulan data, analisis data,dan metode ilmiah

  14. ANALISIS PENGARUH KINERJA LINGKUNGAN TERHADAP KINERJA INDUSTRI KECIL

    Directory of Open Access Journals (Sweden)

    Sukirman -

    2012-03-01

    Full Text Available Tujuan penelitian adalah mengidentifikasi, menganalisis praktik pengelolaan lingkungan pada sentra industri kecil dibandingkan best practices dalam upaya meningkatkan kinerja lingkungan di Kabupaten Pati. Kajian difokuskan pada pengelolaan lingkungan secara efektif dengan melibatkan variabel inisiatif lingkungan, keterlibatan karyawan, dan integrasi dengan supplier. Populasinya adalah seluruh perusahaan Industri Kecil di Kabupaten Pati. Sampel berjumlah 97 perusahaan. Teknik sampling menggunakan kluster sampling, dengan sampel pada sentra industri kecil di Kabupaten Pati.  Analisis menggunakan analisis deskriptif dan analisis komparatif. Hasil penelitian menunjukkan praktik pengelolaan lingkungan pada sentra industri kecil di Kabupaten Pati belum dilaksanakan secara optimal. Sementara itu, variabel integrasi supplier berpengaruh langsung terhadap kinerja perusahaan.The purpose of this study is to identify and to analyze an environmental management practice which is compared to the best practices in order to improve environmental performance in the industrial centers in Pati District. This study focuses on managing the environment effectively by involving environmental initiative variables, employee involvement, and integration of suppliers. Population in this study was all small industrial enterprises in Pati regency which has 97 companies as data samples. Data were collected by using cluster sampling techniques, and samples were taken from small industrial centers in the District of Pati. Data were analyzed by using descriptive and comparative methods. Results of this study showed that environmental management practices in small industrial centers had not been implemented optimally. Meanwhile, supplier integration variables influenced directly toward corporate performance.

  15. Microfinanza: analisi d’impatto di un programma in India

    Directory of Open Access Journals (Sweden)

    Tommaso Rondinella

    2005-03-01

    Full Text Available L’analisi d’impatto dei programmi di microfinanza è uno strumento utile sia per migliorare i servizi offerti sia per garantire ai donatori che il denaro concesso sia utilizzato per programmi efficaci nell’alleviare la povertà. Il presente lavoro è costituito da due parti: la prima è dedicata all’analisi d’impatto, la seconda all’analisi empirica sul campo. L’indagine è stata condotta attraverso l’utilizzo di uno strumento in grado di dare una indicazione chiara dei cambiamenti avvenuti nelle condizioni di vita dei beneficiari e con il pregio di essere applicabile a costi molto ridotti. I risultati ottenuti mostrano in che misura l’accesso al credito cambi le condizioni di vita dei più poveri inducendo consistenti aumenti del reddito familiare, dei risparmi, della diversificazione delle attività produttive e del consumo di cibo. Inoltre si osserva, all’interno dei nuclei familiari, un miglioramento della condizione femminile chiaramente dipendente dalla partecipazione al programma di microcredito

  16. ANALISIS CLUSTER K-MEANS DALAM PENGELOMPOKAN KEMAMPUAN MAHASISWA

    Directory of Open Access Journals (Sweden)

    B. Poerwanto

    2016-12-01

    Full Text Available Abstract. Cluster Analysis, K-Means Algorithm, Student Classification. This study aims to classify students based on learning outcomes for subject the basic of statistics (DDS, which is measured based on attendance, task, midterm (UTS, and final exams (UAS to further used to evaluate learning for subjects that require analysis of quantitative . This study uses k-means cluster analysis to classify the students into three groups based on learning outcomes. After grouped, there are 3 people in the low category, 27 in the medium category and over 70% in the high category.Abstrak. Analisis Cluster K-Means dalam Pengelompokan Kemampuan Mahasiswa. Pene-litian ini bertujuan untuk mengelompokkan mahasiswa berdasarkan hasil belajar mata kuliah dasar-dasar statistika (DDS yang diukur berdasarkan variabel nilai kehadiran, tugas, ujian tengah semester (UTS, dan ujian akhir semester (UAS untuk selanjutnya digunakan untuk mengevaluasi pembelajaran untuk mata kuliah yang membutuhkan kemampuan analisis kuantititatif yang baik. Penelitian ini menggunakan analisis cluster k-means dalam mengelompokkan mahasiswa ke dalam tiga kelompok berdasarkan hasil belajarnya. Seteleh dikelompokkan, terdapat 3 orang yang masuk pada kategori rendah, 27 orang pada kategori sedang dan lebih dari 70% pada kategori tinggi.Kata Kunci: Cluster Analysis, K-Means Algoritma, Klasifikasi Mahasiswa, Universitas Cokroaminoto Palopo

  17. Estetika Tari Minang dalam Kesenian Randai Analisis Tekstual-Kontekstual

    Directory of Open Access Journals (Sweden)

    Sri Rustiyanti

    2013-03-01

    Full Text Available ABSTRACT   This paper reveals textual and contextual Randai, among other things, an analysis of Gerak Ga­ lombang Randai, an analysis of the character of Anak Randai, and at the end of the study series, to reveal the values contained in Randai as a cultural reality, which in principle is an inseparable part of the existence of Minangkabau community as the cultural support. The variety of motion used in Gerak Galombang Randai is not only a decoration of the motion beauty (tangible, but it also can be translated, as well as a symbol or emblem that has educational meanings (intangible, and can be an example of the daily life of the indigenous Minangkabau society.   Keywords: Minang Dance aesthetic, Randai, textual­contextual analysis     ABSTRAK   Tulisan ini mengungkap teksual dan kontekstual Randai, di antaranya, analisis terhadap gerak galombang Randai, analisis karakter tokoh anak Randai, dan sebagai akhir dari rang- kaian penelitian ini, mengungkapkan nilai-nilai yang terdapat pada Randai sebagai realitas budaya, yang pada prinsipnya merupakan bagian yang tak dapat dipisahkan dari eksistensi masyarakat Minangkabau sebagai penyangga kebudayaan. Ragam gerak yang digunakan dalam gerak galombang Randai itu kiranya tidak hanya sekedar hiasan keindahan gerak be- laka (tangibel, namun ia dapat diterjemahkan, sekaligus merupakan simbol atau lambang yang bermakna  mendidik (intangibel, dan dapat   menjadi teladan dalam kehidupan se- hari-hari dalam masyarakat adat di Minangkabau.   Kata Kunci: estetika Tari Minang, Randai, analisis tekstual-kontekstual

  18. Analisis Termal High Pressure Feedwater Heater di PLTU PT. XYZ

    Directory of Open Access Journals (Sweden)

    Maria Ulfa Damayanti

    2017-01-01

    Full Text Available Abstrak- PT. XYZ mengoperasikan tiga unit Pembangkit Listrik Tenaga Uap (PLTU unit 3, 7 dan 8 berkapasitas 2.030 MegaWatt. Pada PLTU Paiton unit 7 dan 8 terdapat delapan buah feedwater heater yaitu empat buah Low Pressure Water Heater (LPWH, tiga buah High Pressure Water Heater (HPWH, dan sebuah dearator. Pada PLTU Paiton unit 7 dan 8 terdapat kerusakan pada HPWH 6 yang menyebabkan penurunan efisiensi dari siklus secara keseluruhan. Penurunan efisiensi dapat terjadi karena temperatur feedwater sebelum masuk ke boiler terlalu rendah, sehingga kalor yang dibutuhkan oleh boiler untuk memanaskan feedwater meningkat. Oleh karena itu konsumsi batubara akan meningkat dan menyebabkan terjadi kenaikan biaya operasional harian dalam sistem pembangkit. Dari data Divisi Produksi PT. XYZ Unit 7 dan 8 diperoleh spesifikasi HPWH 6, 7, dan 8 dan propertis fluida dalam HPWH 6, 7, dan 8. Data tersebut digunakan sebagai dasar analisis termal yang meliputi performa masing-masing HPH. Tahap selanjutnya dalam analisis termal adalah memvariasikan beban 25%, 50%, 75%, 100%, dan 105%. Tahap terakhir analisis adalah menghitung performa dengan variasi sumbatan (plug 5%, 10%, 15%, dan 20% sesuai dengan variasi beban. Hasil yang didapatkan dari penelitian tugas akhir ini adalah nilai effectiveness tertinggi tercapai pada pembebanan 100% serta menghasilkan pressure drop tertinggi pada pembebanan 105%, nilai effectiveness terbesar serta nilai pressure drop terkecil terjadi pada zona Condensing, serta sumbatan (plugging pada HPH akan menyebabkan penurunan nilai effectiveness dan kenaikan pressure drop sisi tube.

  19. Curved Josephson junction

    International Nuclear Information System (INIS)

    Dobrowolski, Tomasz

    2012-01-01

    The constant curvature one and quasi-one dimensional Josephson junction is considered. On the base of Maxwell equations, the sine–Gordon equation that describes an influence of curvature on the kink motion was obtained. It is showed that the method of geometrical reduction of the sine–Gordon model from three to lower dimensional manifold leads to an identical form of the sine–Gordon equation. - Highlights: ► The research on dynamics of the phase in a curved Josephson junction is performed. ► The geometrical reduction is applied to the sine–Gordon model. ► The results of geometrical reduction and the fundamental research are compared.

  20. Curved-Duct

    Directory of Open Access Journals (Sweden)

    Je Hyun Baekt

    2000-01-01

    Full Text Available A numerical study is conducted on the fully-developed laminar flow of an incompressible viscous fluid in a square duct rotating about a perpendicular axis to the axial direction of the duct. At the straight duct, the rotation produces vortices due to the Coriolis force. Generally two vortex cells are formed and the axial velocity distribution is distorted by the effect of this Coriolis force. When a convective force is weak, two counter-rotating vortices are shown with a quasi-parabolic axial velocity profile for weak rotation rates. As the rotation rate increases, the axial velocity on the vertical centreline of the duct begins to flatten and the location of vorticity center is moved near to wall by the effect of the Coriolis force. When the convective inertia force is strong, a double-vortex secondary flow appears in the transverse planes of the duct for weak rotation rates but as the speed of rotation increases the secondary flow is shown to split into an asymmetric configuration of four counter-rotating vortices. If the rotation rates are increased further, the secondary flow restabilizes to a slightly asymmetric double-vortex configuration. Also, a numerical study is conducted on the laminar flow of an incompressible viscous fluid in a 90°-bend square duct that rotates about axis parallel to the axial direction of the inlet. At a 90°-bend square duct, the feature of flow by the effect of a Coriolis force and a centrifugal force, namely a secondary flow by the centrifugal force in the curved region and the Coriolis force in the downstream region, is shown since the centrifugal force in curved region and the Coriolis force in downstream region are dominant respectively.

  1. Elliptic curves for applications (Tutorial)

    NARCIS (Netherlands)

    Lange, T.; Bernstein, D.J.; Chatterjee, S.

    2011-01-01

    More than 25 years ago, elliptic curves over finite fields were suggested as a group in which the Discrete Logarithm Problem (DLP) can be hard. Since then many researchers have scrutinized the security of the DLP on elliptic curves with the result that for suitably chosen curves only exponential

  2. Titration Curves: Fact and Fiction.

    Science.gov (United States)

    Chamberlain, John

    1997-01-01

    Discusses ways in which datalogging equipment can enable titration curves to be measured accurately and how computing power can be used to predict the shape of curves. Highlights include sources of error, use of spreadsheets to generate titration curves, titration of a weak acid with a strong alkali, dibasic acids, weak acid and weak base, and…

  3. Development of a numerical code for the analysis of the linear stability of the U1 and U2 reactors of the CNLV; Desarrollo de un codigo numerico para el analisis de estabilidad lineal de los reactores de las U1 y U2 de la CNLV

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa P, G.; Estrada P, C.E. [Universidad Autonoma Metropolitana-Iztapalapa, 09000 Mexico D.F. (Mexico); Nunez C, A.; Amador G, R. [Comision Nacional de Seguridad Nuclear y Salvaguardias, Mexico D.F. (Mexico)

    2001-07-01

    The computer code ANESLI-1 developed by the CNSNS and UAM-I, has the main goal of making stability analysis of nuclear reactors of the BWR type, more specifically, the reactors of the U1 and U2 of the CNLV. However it can be used for another kind of applications. Its capacity of real time simulator, allows the prediction of operational transients, and conditions of dynamic steady states. ANESLI-1 was developed under a modular scheme, which allows to extend or/and to improve its scope. The lineal stability analysis predicts the instabilities produced by the wave density phenomenon. (Author)

  4. A Journey Between Two Curves

    Directory of Open Access Journals (Sweden)

    Sergey A. Cherkis

    2007-03-01

    Full Text Available A typical solution of an integrable system is described in terms of a holomorphic curve and a line bundle over it. The curve provides the action variables while the time evolution is a linear flow on the curve's Jacobian. Even though the system of Nahm equations is closely related to the Hitchin system, the curves appearing in these two cases have very different nature. The former can be described in terms of some classical scattering problem while the latter provides a solution to some Seiberg-Witten gauge theory. This note identifies the setup in which one can formulate the question of relating the two curves.

  5. Soil Water Retention Curve

    Science.gov (United States)

    Johnson, L. E.; Kim, J.; Cifelli, R.; Chandra, C. V.

    2016-12-01

    Potential water retention, S, is one of parameters commonly used in hydrologic modeling for soil moisture accounting. Physically, S indicates total amount of water which can be stored in soil and is expressed in units of depth. S can be represented as a change of soil moisture content and in this context is commonly used to estimate direct runoff, especially in the Soil Conservation Service (SCS) curve number (CN) method. Generally, the lumped and the distributed hydrologic models can easily use the SCS-CN method to estimate direct runoff. Changes in potential water retention have been used in previous SCS-CN studies; however, these studies have focused on long-term hydrologic simulations where S is allowed to vary at the daily time scale. While useful for hydrologic events that span multiple days, the resolution is too coarse for short-term applications such as flash flood events where S may not recover its full potential. In this study, a new method for estimating a time-variable potential water retention at hourly time-scales is presented. The methodology is applied for the Napa River basin, California. The streamflow gage at St Helena, located in the upper reaches of the basin, is used as the control gage site to evaluate the model performance as it is has minimal influences by reservoirs and diversions. Rainfall events from 2011 to 2012 are used for estimating the event-based SCS CN to transfer to S. As a result, we have derived the potential water retention curve and it is classified into three sections depending on the relative change in S. The first is a negative slope section arising from the difference in the rate of moving water through the soil column, the second is a zero change section representing the initial recovery the potential water retention, and the third is a positive change section representing the full recovery of the potential water retention. Also, we found that the soil water moving has traffic jam within 24 hours after finished first

  6. Fermions in curved spacetimes

    Energy Technology Data Exchange (ETDEWEB)

    Lippoldt, Stefan

    2016-01-21

    In this thesis we study a formulation of Dirac fermions in curved spacetime that respects general coordinate invariance as well as invariance under local spin base transformations. We emphasize the advantages of the spin base invariant formalism both from a conceptual as well as from a practical viewpoint. This suggests that local spin base invariance should be added to the list of (effective) properties of (quantum) gravity theories. We find support for this viewpoint by the explicit construction of a global realization of the Clifford algebra on a 2-sphere which is impossible in the spin-base non-invariant vielbein formalism. The natural variables for this formulation are spacetime-dependent Dirac matrices subject to the Clifford-algebra constraint. In particular, a coframe, i.e. vielbein field is not required. We disclose the hidden spin base invariance of the vielbein formalism. Explicit formulas for the spin connection as a function of the Dirac matrices are found. This connection consists of a canonical part that is completely fixed in terms of the Dirac matrices and a free part that can be interpreted as spin torsion. The common Lorentz symmetric gauge for the vielbein is constructed for the Dirac matrices, even for metrics which are not linearly connected. Under certain criteria, it constitutes the simplest possible gauge, demonstrating why this gauge is so useful. Using the spin base formulation for building a field theory of quantized gravity and matter fields, we show that it suffices to quantize the metric and the matter fields. This observation is of particular relevance for field theory approaches to quantum gravity, as it can serve for a purely metric-based quantization scheme for gravity even in the presence of fermions. Hence, in the second part of this thesis we critically examine the gauge, and the field-parametrization dependence of renormalization group flows in the vicinity of non-Gaussian fixed points in quantum gravity. While physical

  7. ANALISIS PENERAPAN 8 STANDAR NASIONAL PENDIDIKAN PADA SMP NEGERI 2 DOLOPO KABUPATEN MADIUN

    Directory of Open Access Journals (Sweden)

    Luki Eko Cahyono

    2015-10-01

    Penelitian ini menggunakan desain penelitian Deskriptif Kualitatif. Jenis penelitian adalah studi kasus. Data yang digunakan adalah data Primer. Teknik pengumpulan data yang digunakan adalah wawancara dan dokumentasi. Teknik keabsahan data adalah Triangulasi Sumber dan teknik analisis data yang digunakan adalah pendekatan Strengths, Weakness, Opportunities, dan Threats (Analisis SWOT. Kesimpulan penelitian ini adalah (1 Hasil analisis Strenght (Kekuatan adalah sekolah sudah merencanakan, melaksanakan dan mengevaluasi sebagian besar indikator dalam pemenuhan Standar Nasional Pendidikan sehingga meningkatkan mutu pendidikan sekolah. (2 Hasil analisis Weakness (kelemahan adalah keterbatasan anggaran dana dan sumber daya manusia baik peserta didik, pendidik, maupun tenaga kependidikan dalam pemenuhan seluruh unsur Standar Nasional Pendidikan. (3 Hasil analisis Opportunities (peluang adalah Pemberian workshop dan pelatihan kepada pendidik dan tenaga kependidikan meningkatkan kualitas pendidikan sekolah, dan perencanaan, pelaksanaan pembiayaan serta evaluasi penganggaran yang baik memberikan dampak positif terhadap semua unsur operasional sekolah maupun sarana prasarana sekolah. (4 Hasil analisis Threats (Tantangan adalah perencanaan, sosialisasi, pelaksanaan dan evaluasi serta tindak lanjut yang tidak dijalankan dengan manajemen yang baik dalam upaya pemenuhan Standar Nasional Pendidikan akan menghambat peningkatan kualitas pendidikan sekolah. (5 Hasil penerapan Standar Nasional Pendidikan pada SMP Negeri 2 Dolopo menggunakan analisis SWOT menunjukkan bahwa Kekuatan lebih besar daripada Kelemahan dan Peluang lebih besar dari Ancaman, yang berarti Standar Nasional Pendidikan telah terpenuhi dan menghasilkan Akreditasi Sekolah nilai A.

  8. ANALISIS DIAZINON SECARA DIFERENSIAL PULSA VOLTAMETRI DIBANDINGKAN DENGAN KROMATOGRAFI (Diazinon Analysis with Differential Pulse Voltametry Compared to Chromatography

    Directory of Open Access Journals (Sweden)

    Pirim Setiarso

    2011-07-01

    Full Text Available ABSTRAK Telah dilakukan penelitian penentuan diazinon dari sampel tanah pertanian di beberapa kecamatan Kabupaten Nganjuk Jawa Timur menggunakan elektroda kerja tembaga amalgam padat (CuSAE secara diferensial pulsa voltametri (DPV dibandingkan dengan metode kromatografi. 100 g sampel tanah pertanian yang dihaluskan dengan ukuran 100 mesh diekstraksi menggunakan aseton. Ekstraksi dilakukan menggunakan ekstraktror soxhlet dengan 10 kali sirkulasi. Hasil ekstraksi sebagian ditambahkan surfaktan SDS untuk dianalisis secara voltametri menggunakan elektroda CuSAE dan sebagian dianalisis menggunakan kromatografi cair kinerja tinggi (HPLC. Analisis voltametri dilakukan pada pH 3 dengan elektrolit pendukung CaCl 2 menggunakan standar adisi, sedangkan analisis dengan HPLC menggunakan grafik standar. Berdasarkan data voltamogram dan kromatogram yang telah diolah dengan program origin 7.0 menghasilkan perolehan kembali rata-rata diazinon (97.40 ± 1.02 % pada voltametri dan (100.98 ± 7.10 % pada HPLC. Analisis diazinon kedua metode dibandingkan dengan uji t (t hitung = 0.4785 < t tabel = 2.31 sehingga tidak ada perbedaan hasil antara metode voltametri dan HPLC. ABSTRACT The research has been done for determination of diazinon in agricultural soil samples from several districts n Nganjuk, East Java . Solid copper amalgam (CuSAE used  as a working electrode using differential ulse voltammetry (DPV compared with chromatographic method. Around 100 g sample of agricultural soil ith a size 100 mesh was extracted using 100 ml acetone. The extraction was done using extractor oxhlet with 10 times the circulation. A part of the extraction  yield  was  added SDS surfactant for analysis by DPV,  and another part analyzed  by using high performance liquid chromatography (HPLC. Voltammetric analysis carried out at pH 3 with CaCl2 as a supporting electrolyte   using standard addition method, while the analysis by HPLC using calibration curve (standard

  9. Models of genus one curves

    OpenAIRE

    Sadek, Mohammad

    2010-01-01

    In this thesis we give insight into the minimisation problem of genus one curves defined by equations other than Weierstrass equations. We are interested in genus one curves given as double covers of P1, plane cubics, or complete intersections of two quadrics in P3. By minimising such a curve we mean making the invariants associated to its defining equations as small as possible using a suitable change of coordinates. We study the non-uniqueness of minimisations of the genus one curves des...

  10. Analisis Penerimaan PAD Pada Dinas Perikanan dan Peternakan Kabupaten Tebo

    Directory of Open Access Journals (Sweden)

    Eko Purnarianto

    2016-06-01

    Full Text Available Abstract. This study aims to analyze potential, efficiency, effectivity and contribution of PAD admission at Department of Fishery and Animal Husbandry in Tebo Regencyincluding the strategy establishment to increase its revenue.The analysis used is a potential formula, efficiency ratio, effectivity ratio, contributions ratio and SWOT analysis.The results shows that the potential revenue of retribution slaughterhouse (RPH, the potential sales of livestock, and potential sales fishery product are beyond the current target. The efficiency level of retribution slaughterhouse (RPH and sales of fishery product is poor, but the sales of livestock is very efficient. Effectivity level of livestock and fishery product sales are low, whileretribution slaughterhouses(RPH is not effective regarded to its potential  but in the contrary for its target. Contribution of PAD admission of Fishery and Animal Husbandry Department is very low regarded Tebo Regency PAD. The result of SWOT analysis of retribution slaughter house (RPH admission using WO (Weakness-Opportunity strategy, livestock sales using SO (Strength-Oppurtunity strategy, and fishery product sales using ST (strength-threat strategy. Keywords: Retribution SlaughterHouse (RPH, Sales of Fishery, Livestock Sales, SWOT Analysis   Abstrak. Penelitian ini bertujuan untuk menganalisis potensi, efisiensi, efektivitas dan kontribusi penerimaan PAD pada Dinas Perikanan dan Peternakan Kabupaten Teboserta menetapkan strategi untuk peningkatan penerimaan PAD. Analisis yang digunakan adalah rumus potensi, rasio efisiensi, rasio efektivitas, rasio kontribusi dan analisis SWOT.Hasil penelitian menunjukkan bahwa potensi penerimaan retribusi rumah potong hewan (RPH, potensi penjualan hasil peternakan, potensi  penjualan hasil perikanan lebih besar dari target yang telah ditetapkan. Tingkat efisiensi retribusi RPH dan penjualan hasil perikanan tidak efisien, penjualan hasil peternakan sangat efisien. Tingkat

  11. Identifiksi Sebaran Litologi berdasarkan Analisis Data Resistivitas di Gunung Wungkal

    Directory of Open Access Journals (Sweden)

    Nurul Dzakiya

    2017-05-01

    Full Text Available Analisis data untuk mengidentifikasi sebaran litologi yang memiliki potensi bahan galian industri di Daerah Gunung Wungkal Yogyakarta dengan menggunakan metode resistivitas dan survei geologi permukaan telah dilakukan. Hasil korelasi kedua data tersebut menunjukkan sebaran litologi merupakan pelapukan intrusi batuan beku yang kemudian menghasilkan material lempung (6,0-10 m, lempung pasiran (11-30 m dan lapukan batuan diorit (30-55 m yang berada di kedalaman berbeda. Ketebalan batuan di permukaan sekitar 225-231 meter berdasarkan penampang peta geologi dengan arah sebaran dari Barat Laut hingga Tenggara. Proses pelapukan dan alterasi di daerah ini intensif (alterasi argilik dengan jenis morfologi perbukitan intrusi terdenudasi dan dataran Alluvial.

  12. ANALISIS KEAMANAN DATA PADA BLOCK CIPHER ALGORITMA KRIPTOGRAFI RSA

    Directory of Open Access Journals (Sweden)

    Fadhillah Azmi

    2017-01-01

    Full Text Available Komunikasi adalah proses dasar dari pertukaran informasi. Efektifitas komunikasikomputer secara umum adalah melalui internet atau beberapa saluran komunikasi lainnya.Tujuan utama tulisan ini adalah berdasarkan pada analisis hasil yang diberikan Weinermengatakan bahwa jika private key d digunakan dalam algoritma kriptografi RSA kurang darin292, maka sistem tersebut kurang aman. Di sini penulis menganalisa pada hasil yang diberikanoleh Weiner dan mencoba untuk meningkatkan range dari private key d sampai n0.5. Karena nadalah perkalian p dan q, yang mana bilangan relative prima. Sehingga mempengaruhi kinerjaenkripsi algoritma yang lebih aman.

  13. Analisis Derau dalam Perancangan Rangkaian Terintegrasi Op-Amp

    Directory of Open Access Journals (Sweden)

    Siti Sendari

    2009-02-01

    Full Text Available Perancangan IC Op-Amp, memerlukan spesifikasi-spesifikasi yang meliputi parameter proses dan parameter perancangan. Dalam menentukan parameter perancangan, derau merupakan suatu hal yang tidak bisa ditinggalkan, karena derau dapat menentukan keandalan perancangan. Untuk menganalisis derau pada IC Op-Amp langkah pertama yang harus diketahui adalah sumber-sumber derau, setelah itu dilakukan analisis derau baik secara teoritis maupun secara simulasi untuk mengetahui derau yang mungkin terjadi dalam perancangan IC, apakah sudah sesuai dengan spesifikasi yang ditentukan atau tidak. Untuk simulasi derau dapat dilakukan dengan program Spice.

  14. Quantum fields in curved space

    International Nuclear Information System (INIS)

    Birrell, N.D.; Davies, P.C.W.

    1982-01-01

    The book presents a comprehensive review of the subject of gravitational effects in quantum field theory. Quantum field theory in Minkowski space, quantum field theory in curved spacetime, flat spacetime examples, curved spacetime examples, stress-tensor renormalization, applications of renormalization techniques, quantum black holes and interacting fields are all discussed in detail. (U.K.)

  15. Extended analysis of cooling curves

    International Nuclear Information System (INIS)

    Djurdjevic, M.B.; Kierkus, W.T.; Liliac, R.E.; Sokolowski, J.H.

    2002-01-01

    Thermal Analysis (TA) is the measurement of changes in a physical property of a material that is heated through a phase transformation temperature range. The temperature changes in the material are recorded as a function of the heating or cooling time in such a manner that allows for the detection of phase transformations. In order to increase accuracy, characteristic points on the cooling curve have been identified using the first derivative curve plotted versus time. In this paper, an alternative approach to the analysis of the cooling curve has been proposed. The first derivative curve has been plotted versus temperature and all characteristic points have been identified with the same accuracy achieved using the traditional method. The new cooling curve analysis also enables the Dendrite Coherency Point (DCP) to be detected using only one thermocouple. (author)

  16. Klasifikasi Kecamatan Berdasarkan Nilai Akhir SMA/MA di Kabupaten Aceh Selatan Menggunakan Analisis Diskriminan

    Directory of Open Access Journals (Sweden)

    Fitriana A.R.

    2015-11-01

    Full Text Available Analisis diskriminan merupakan bagian dari analisis peubah ganda. Analisis diskriminan digunakan untuk memodelkan variabel tak bebas yang bersifat kualitatif dengan variabel bebas yang bersifat kuantitatif. Pada penelitian ini, analisis diskriminan lebih dari dua kelompok diterapkan pada data nilai akhir SMA/MA di Kabupaten Aceh Selatan yang bertujuan untuk mendapatkan model untuk pengklasifikasian kecamatan. Pengklasifikasian ini bertujuan untuk melihat perbedaan kualitas siswa SMA/MA yang berada di masing-masing kecamatan Kabupaten Aceh Selatan berdasarkan data nilai akhir. Variabel tak bebas yang digunakan berupa klasifikasi kecamatan berdasarkan rata-rata jumlah nilai akhir SMA/MA yang berada di masing-masing kecamatan yang dibentuk dengan K-Means Cluster. Sedangkan variabel bebas yang digunakan adalah data rata-rata nilai akhir SMA/MA untuk setiap mata pelajaran yang diujiankan pada masing-masing jurusan setiap kecamatan. Model yang didapatkan adalah dua model diskriminan untuk jurusan IPA dan IPS.

  17. La financial education nella regione Puglia: analisi e prospettive di intervento

    OpenAIRE

    A. Garzoni; V. Nastasi

    2010-01-01

    Analisi del contesto e delle principali tematiche di financial education affrontate a livello internazionale e nazionale, valutazione delle opportunità e degli aspetti critici, il progetto pilota nella regione Puglia e le nuove idee di progetto da realizzare

  18. ANALISIS FINANSIAL DAN KELEMBAGAAN RANTAI NILAI MEBEL MAHONI JEPARA

    Directory of Open Access Journals (Sweden)

    Nunung Parlinah

    2011-12-01

    Full Text Available Industri mebel umumnya termasuk dalam industri kecil dan menengah. Selain berperan dalam penerimaan devisa, bisnis di bidang mebel ini juga menciptakan lapangan kerja bagi masyarakat terutama di Kabupaten Jepara. Adanya hubungan (pemberi kepercayaan - (penerima kepercayaan yang terjadi antar aktor atau pelaku di dalam rantai berpengaruh terhadap besarnya distribusi nilai tambah yang diperoleh oleh masingmasing pelaku di sepanjang rantai nilai Tujuan dari penelitian ini adalah mengidentifikasi kelembagaan (aturan yang terjadi antar pelaku di sepanjang rantai nilai mebel mahoni Jepara dan menentukan skenario kebijakan yang dapat mendukung bagi kelestarian industri mebel Jepara. Data yang digunakan meliputi data primer dan data sekunder. Analisis data meliputi identifikasi aktor dan kelembagaan (aturan yang terjadi antar pelaku serta analisis manfaat biaya yang terdiri dari NVP, BCR dan IRR. Hasil penelitian menunjukkan bahwa (1 para pengrajin ( memproduksi mebelnya lebih didasarkan pada pesanan pembeli ( . agent principal Asymetic information yang terjadi antara pedagang kayu dan petani juga telah mengakibatkan posisi petani sebagai (2 Nilai NPV, BCRdan IRR untuk tiap pelaku berbeda-beda tetapi nilai-nilai tersebut mengindikasikan bahwa pola kemitraan yang terjadi antar pelaku dalam rantai nilai mebel mahoni saat ini sudah efektif. Skenario kebijakan yang dapat diterapkan adalah kebijakan yang bersifat insentif bagi petani hutan rakyat, peningkatan kemampuan pengrajin di bidang pemasaran; dan membangun aksi kolektif diantara pengrajin. price taker;

  19. Analisis Rugi Daya Pada Penyulang Bangli Dengan Beroperasinya PLTS Kayubihi

    Directory of Open Access Journals (Sweden)

    I GN Dion Adiputra

    2015-06-01

    Full Text Available Analisis rugi daya pada Penyulang Bangli dilakukan untuk mengetahui perbanding an rugi daya pada jaringan distribusi setelah penempatan pembangkit tersebar jenis PLTS berkapasitas 1 MWp. Lokasi penempatan PLTS ditentukan berdasarkan analisis sensitivitas bus. Nilai sensitivitas bus(?didapat dengan cara membandingkan nilai rugi daya pada sistem dengan total beban yang terhubung pada bus. Penelitian ini menggunakan simulasi aliran daya dengan metode aliran daya Newton-Raphson. Hasil penelitian menunjukkan bus TK 0041 memiliki sensitivitas terbesar dengan nilai ?= 0,178. Dari hasil simulasi aliran daya, penempatan PLTS 1MWp pada lokasi alternatif 1 menghasilkan rugi daya minimum pada Penyulang Bangli yaitu 103,1 kW atau 3,3% dari total suplai daya 3071 kW. Pemasangan PLTS dapat menurunkan rugi daya pada Penyulang Bangli sebesar 57 kW dari total rugi daya pada kondisi tanpa PLTS yaitu 160,1 kW. Bila dibandingkan dengan kondisi eksisting, penem patan PLTS pada lokasi alternatif 1 memiliki selisih rugi daya 7,3 kW lebih kecil dari total rugi daya yang dihasilkan kondisi eksisting sebesar 110,4kW.

  20. Pembuatan Dan Analisis Exciter Generator Rf Untuk Siklotron Proton Decy-13

    OpenAIRE

    Prajitno, Prajitno

    2011-01-01

    PEMBUATAN DAN ANALISIS EXCITER GENERATOR RF UNTUK SIKLOTRON PROTON DECY-13.Telah dilakukan analisis dan pembuatan exciter generator RF untuk siklotron proton 13MeV. Generator RFakan digunakan sebagai sumber tegangan pemercepat bolak-Balik siklotron DECY-13 rancangan PTAPBBATAN.Berdasarkan dokumen rancangan dasar yang telah dibuat siklotron Decy-13 akan menggunakanmedan magnet 1,275 Tesla, sehingga frekuensi generator RF bila menggunakan harmonik keempat adalah77,667 MHz. Salah satu teknik pem...

  1. ANALISIS HARGA POKOK PRODUKSI DAN PENERAPAN TARGET COSTING PADA UD WAJUKU MAKASSAR

    OpenAIRE

    -, CHAIDIR HAFID

    2017-01-01

    ABSTRAK Analisis Harga Pokok Produksi dan Penerapan Target Costing pada UD Wajuku Makassar The Analysis of The Cost of Goods Manufactured and Implementation of Target Costing in UD Wajuku Makassar Chaidir Hafid Asri Usman Syahrir Penelitian ini bertujuan untuk mengetahui perhitungan harga pokok produksi baju kaos polos sebelum dan setelah penerapan metode target costing pada UD Wajuku Makassar. Metode pengumpulan data yang digunakan adalah dokumentasi. Metode analisis dat...

  2. PENGUKURAN KINERJA PERUSAHAAN PT. HADJI KALLA DENGAN MENGGUNAKAN ANALISIS ECONOMIC VALUE ADDED

    OpenAIRE

    2013-01-01

    Tujuan dari penelitian ini adalah mengetahui kinerja Economic Value Added (EVA) yang dicapai oleh perusahaan PT. Hadji Kalla, sedangkan metode analisis yang digunakan dalam penelitian ini adalah analisis perkembangan Economic Value Added (EVA), Net Operating Profit After Tax (NOPAT) dan The purpose of this study was to determine the performance of the Economic Value Added (EVA), which is achieved by the company PT. Hadji Kalla...

  3. ANALISIS MODEL PREDIKSI AWAL MUSIM HUJAN DI SULAWESI SELATAN

    Directory of Open Access Journals (Sweden)

    Alimatul Rahim

    2016-03-01

    Full Text Available Model prediksi awal musim hujan merupakan salah satu kunci yang dapat digunakan untuk mengurangi resiko kegagalan panen padi yang disebabkan oleh faktor iklim di provinsi Sulawesi Selatan. Model prediksi awal musim hujan dibangun  dengan menggunakan data curah hujan observasi Sulawesi Selatan dan anomali suhu muka laut di kawasan Pasifik dan perairan Sulawesi. Pada studi ini dilakukan analisis pemilihan stasiun hujan observasi, penentuan awal musim hujan, analisis komponen utama dan pengelompokan, analisis korelasi awal musim hujan terhadap anomali suhu muka laut, pembangunan model untuk prediksi awal musimhujan dan verifikasi model.Hasil analisis awal musim hujan menunjukkan setiap stasiun hujan mempunyai perbedaan awal musim hujan dengan rata-rata jatuh pada Julian Date (JD ke-348 (14 Desember. Berdasarkan hasil analisis PCA dan cluster, diperoleh bahwa di Sulawesi Selatan terbagi menjadi 3 cluster wilayah. Cluster 1 mempunyai pola hujan lokal, sedangkan cluster 2 dan 3 mempunyai pola hujan monsun. Pada peta korelasi antara awal musim hujan di Sulawesi Selatan dan anomali suhu muka laut menunjukkan bahwa terdapat korelasi nyata(r≥0.5 antara kawasan Pasifik dan Laut Sulawesi pada cluster 1 dan 2 pada bulan Juni Juli Agustus September(JJAS. Sedangkan pada cluster 3, korelasi nyata hanya pada bulan Juni di perairan Sulawesi. Model prediksi AMH terbaik, pada cluster 2 terdapat di domain prediktor kawasan pasifik dengan nilai r=0.82, sedangkan pada cluster 1 dan 3, terdapat di domain perairan Sulawesi dengan nilai r=0.78 dan r-0.48. Verifikasi model terpilih pada cluster 3 mempunyai RMSE = 3, sedangkan cluster 1 dan 2, nilai RMSE berturut-turut sebesar 16 dan 29.   Model prediction of rainy season onset is one of the keys to reduce the risk of paddy haverst failure because of climate factor in South Sulawesi province. The model prediction for rainy season onset was build using rainfall data in South Sulawesi and SST anomaly in Pacific Ocean and

  4. Membandingkan Tingkat Kemiripan Rekaman Voice Changer Menggunakan Analisis Pitch, Formant dan Spectogram

    Directory of Open Access Journals (Sweden)

    Ahmad Subki

    2018-02-01

    Full Text Available Audio forensik merupakan salah satu ilmu yang mnyandingkan antara ilmu pengetahuan dan metode ilmiah dalam proses analisis rekaman suara untuk membantu dan mendukung pengungkapan suatu tindak kejahatan yang diperlukan dalam proses persidangan. Undang-undang ITE No.19 Tahun 2016 menyebutkan bahwa rekaman suara merupakan salah satu alat bukti digital yang sah dan dapat digunakan sebagai penguat dakwaan. Rekaman suara yang merupakan barang bukti digital sangatlah mudah dan rentan dimanipulasi, baik secara sengaja maupun tidak disengaja. Pada penelitian ini dilakukan analisis terkait tingkat kemiripan antara rekaman suara voice changer dengan rekaman suara asli menggunakan analisis pitch, formant dan spectogram, rekaman suara yang dianalisis ada dua jenis rekaman suara yaitu suara laki-laki dan suara perempuan. Rekaman suara voice changer  dan rekaman suara asli, diekstrak menggunakan tools praat kemudian informasi yang diperoleh dianalisis dengan analisis statistik pitch, formant dan spectrogrammenggunakan tools gnumeric. Penelitian ini menghasilkan bahwa analisis rekaman suara voice changer dengan rekaman suara asli dapat menggunakan analisis statistik pitch, formant dan spectrogram, rekaman suara voice changer A memiliki tingkat kemiripan yang paling tinggi dengan rekaman suara asli pada posisi low pitch, sedangkan voice changer yang lain lebih sulit untuk diidentifikasi.

  5. Numerical Analysis of Turbulent Structures with a {kappa}-{epsilon} 3D Model of a Flow over a Cubic Obstacle; Estudio numerico de estructuras turbulentas con un modelo {kappa}-{epsilon} en 3D de un flujo sobre un obstaculo cubico

    Energy Technology Data Exchange (ETDEWEB)

    Millan Barrera, Cecia; Ramirez Leon, Hermilo [Instituto Mexicano de Tecnologia del Agua, Jiutepec, Morelos (Mexico)

    2001-12-01

    A numerical analysis is applied to a flow in an open channel and deformed by a three dimensional obstacle. The proposed model solves the 3-D Navier-Stokes equations, to which a {kappa}-{epsilon} turbulence model is coupled. The numerical analysis was constructed using a finite difference formulation for time evaluation purposed and staggered cells for space evaluation. The main goal of the present work was to study the turbulent structures and patterns of the flow due to an obstacle at the bottom of the channel plate. Our results are according to those found in the related literature. Flow patterns allow establishing the generation of turbulent structures by means of a comparison between this study and a most recent related work that evaluates the vorticity of the flow. [Spanish] Se reportan los resultados obtenidos, mediante simulaciones numericas, del movimiento del flujo en un canal con superficie libre y un obstaculo en el fondo. El sistema ecuaciones utilizado resuelve las ecuaciones de Navier-Stokes en tres dimensiones, al cual se le acoplo un modelo de turbulencia tipo {kappa}-{epsilon}. La solucion se obtiene numericamente utilizando un esquema en diferencias finitas para la evaluacion temporal de las variables y una celda escalonada para la evaluacion espacial de las mismas. El objetivo del modelo es estudiar los patrones de flujo y las estructuras turbulentas que se generan debido a la presencia del obstaculo. El estudio se realizo para un flujo en tres dimensiones. Los resultados son satisfactorios, ya que muestran concordancia con otros estudios numericos y experimentales encontrados en la literatura.

  6. Computational aspects of algebraic curves

    CERN Document Server

    Shaska, Tanush

    2005-01-01

    The development of new computational techniques and better computing power has made it possible to attack some classical problems of algebraic geometry. The main goal of this book is to highlight such computational techniques related to algebraic curves. The area of research in algebraic curves is receiving more interest not only from the mathematics community, but also from engineers and computer scientists, because of the importance of algebraic curves in applications including cryptography, coding theory, error-correcting codes, digital imaging, computer vision, and many more.This book cove

  7. 51Cr - erythrocyte survival curves

    International Nuclear Information System (INIS)

    Paiva Costa, J. de.

    1982-07-01

    Sixteen patients were studied, being fifteen patients in hemolytic state, and a normal individual as a witness. The aim was to obtain better techniques for the analysis of the erythrocytes, survival curves, according to the recommendations of the International Committee of Hematology. It was used the radiochromatic method as a tracer. Previously a revisional study of the International Literature was made in its aspects inherent to the work in execution, rendering possible to establish comparisons and clarify phonomena observed in cur investigation. Several parameters were considered in this study, hindering both the exponential and the linear curves. The analysis of the survival curves of the erythrocytes in the studied group, revealed that the elution factor did not present a homogeneous answer quantitatively to all, though, the result of the analysis of these curves have been established, through listed programs in the electronic calculator. (Author) [pt

  8. Melting curves of gammairradiated DNA

    International Nuclear Information System (INIS)

    Hofer, H.; Altmann, H.; Kehrer, M.

    1978-08-01

    Melting curves of gammairradiated DNA and data derived of them, are reported. The diminished stability is explained by basedestruction. DNA denatures completely at room temperature, if at least every fifth basepair is broken or weakened by irradiation. (author)

  9. Management of the learning curve

    DEFF Research Database (Denmark)

    Pedersen, Peter-Christian; Slepniov, Dmitrij

    2016-01-01

    Purpose – This paper focuses on the management of the learning curve in overseas capacity expansions. The purpose of this paper is to unravel the direct as well as indirect influences on the learning curve and to advance the understanding of how these affect its management. Design...... the dimensions of the learning process involved in a capacity expansion project and identified the direct and indirect labour influences on the production learning curve. On this basis, the study proposes solutions to managing learning curves in overseas capacity expansions. Furthermore, the paper concludes...... with measures that have the potential to significantly reduce the non-value-added time when establishing new capacities overseas. Originality/value – The paper uses a longitudinal in-depth case study of a Danish wind turbine manufacturer and goes beyond a simplistic treatment of the lead time and learning...

  10. Growth curves for Laron syndrome.

    OpenAIRE

    Laron, Z; Lilos, P; Klinger, B

    1993-01-01

    Growth curves for children with Laron syndrome were constructed on the basis of repeated measurements made throughout infancy, childhood, and puberty in 24 (10 boys, 14 girls) of the 41 patients with this syndrome investigated in our clinic. Growth retardation was already noted at birth, the birth length ranging from 42 to 46 cm in the 12/20 available measurements. The postnatal growth curves deviated sharply from the normal from infancy on. Both sexes showed no clear pubertal spurt. Girls co...

  11. Flow over riblet curved surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Loureiro, J B R; Freire, A P Silva, E-mail: atila@mecanica.ufrj.br [Mechanical Engineering Program, Federal University of Rio de Janeiro (COPPE/UFRJ), C.P. 68503, 21.941-972, Rio de Janeiro, RJ (Brazil)

    2011-12-22

    The present work studies the mechanics of turbulent drag reduction over curved surfaces by riblets. The effects of surface modification on flow separation over steep and smooth curved surfaces are investigated. Four types of two-dimensional surfaces are studied based on the morphometric parameters that describe the body of a blue whale. Local measurements of mean velocity and turbulence profiles are obtained through laser Doppler anemometry (LDA) and particle image velocimetry (PIV).

  12. Intersection numbers of spectral curves

    CERN Document Server

    Eynard, B.

    2011-01-01

    We compute the symplectic invariants of an arbitrary spectral curve with only 1 branchpoint in terms of integrals of characteristic classes in the moduli space of curves. Our formula associates to any spectral curve, a characteristic class, which is determined by the laplace transform of the spectral curve. This is a hint to the key role of Laplace transform in mirror symmetry. When the spectral curve is y=\\sqrt{x}, the formula gives Kontsevich--Witten intersection numbers, when the spectral curve is chosen to be the Lambert function \\exp{x}=y\\exp{-y}, the formula gives the ELSV formula for Hurwitz numbers, and when one chooses the mirror of C^3 with framing f, i.e. \\exp{-x}=\\exp{-yf}(1-\\exp{-y}), the formula gives the Marino-Vafa formula, i.e. the generating function of Gromov-Witten invariants of C^3. In some sense this formula generalizes ELSV, Marino-Vafa formula, and Mumford formula.

  13. Dissolution glow curve in LLD

    International Nuclear Information System (INIS)

    Haverkamp, U.; Wiezorek, C.; Poetter, R.

    1990-01-01

    Lyoluminescence dosimetry is based upon light emission during dissolution of previously irradiated dosimetric materials. The lyoluminescence signal is expressed in the dissolution glow curve. These curves begin, depending on the dissolution system, with a high peak followed by an exponentially decreasing intensity. System parameters that influence the graph of the dissolution glow curve, are, for example, injection speed, temperature and pH value of the solution and the design of the dissolution cell. The initial peak does not significantly correlate with the absorbed dose, it is mainly an effect of the injection. The decay of the curve consists of two exponential components: one fast and one slow. The components depend on the absorbed dose and the dosimetric materials used. In particular, the slow component correlates with the absorbed dose. In contrast to the fast component the argument of the exponential function of the slow component is independent of the dosimetric materials investigated: trehalose, glucose and mannitol. The maximum value, following the peak of the curve, and the integral light output are a measure of the absorbed dose. The reason for the different light outputs of various dosimetric materials after irradiation with the same dose is the differing solubility. The character of the dissolution glow curves is the same following irradiation with photons, electrons or neutrons. (author)

  14. ANALISIS KELAYAKAN FINANSIAL WISATA AIR WADUK JATIGEDE KABUPATEN SUMEDANG

    Directory of Open Access Journals (Sweden)

    Bambang Susanto

    2016-04-01

    pendahuluan agar manfaatnya jauh lebih besar dari biaya yang dikeluarkan. Oleh sebab itu untuk kepentingan ilmiah perlu dilakukan kajian akademisnya berupa Analisis kelayakan Finansial. Berdasarkan analisis kelayakan keuangan   ,dapat  disimpulkan bahwa wisata air di Waduk jatigede Kabupaten Sumedang  memberikan manfaat yang lebih dibandingkan dengan biaya yang dikeluarkan . ini dapat dilihat dari hasil analisis net present value yang positif, internal rate of return yang lebih besar dari tingkat bunga bank serta benefit cost yang lebih besar dari satu. Kata Kunci: Kelayakan Finansial; Wisata Air.

  15. ANALISIS RELEVANSI LULUSAN PERGURUAN TINGGI DENGAN DUNIA KERJA

    Directory of Open Access Journals (Sweden)

    Ali Muhson

    2012-04-01

    Full Text Available Abstract: A Relevance Analysis of University Graduates with World of Work. Education should be oriented to the competencies required by the workforce as a percentage of unemployment among the educated increase continuously. This study aims to examine the relevance of YSU Economic Education graduates. The study only focuses on the type of work and subjects taught. The subject of this study is the alumni of Economic Education Study Program. Sampling technique used is snowball sampling. Data collection technique using questionnaires and documentation while the technique of data analysis using descriptive analysis. The result suggests that the majority of the graduates find their first job as private a teacher, a private employee and a tutor, while current job of the most graduates are private teacher, private employee, and civil servant (teacher. The data shows that more than 50 percent of the graduates work in the education area. This implies that the relevance level based on the type of work is categorized as sufficient. Majority of the graduates teaches social science, economic, and entrepreneurship, hence it can be concluded that the relevance level based on the subjects taught is highly relevant.   Keyword: relevance of graduates, type of work, unemployment, employment     Abstrak: Analisis Relevansi Lulusan Perguruan Tinggi dengan Dunia Kerja. Pendidikan harus berorientasi pada kompetensi yang dibutuhkan oleh dunia kerja karena persentase penganggur di kalangan terdidik terus meningkat. Penelitian ini bertujuan untuk mengkaji tingkat relevansi (kesesuaian lulusan Pendidikan Ekonomi UNY. Kajian hanya diarahkan pada jenis pekerjaan dan mata pelajaran yang diampu. Penelitian ini mengambil subjek alumni Prodi Pendidikan Ekonomi dari berbagai angkatan. Teknik sampling yang digunakan adalah snowball sampling. Teknik pengumpulan data menggunakan angket dan dokumentasi sedangkan teknik analisis data menggunakan analisis deskriptif. Penelitian ini

  16. Curve Boxplot: Generalization of Boxplot for Ensembles of Curves.

    Science.gov (United States)

    Mirzargar, Mahsa; Whitaker, Ross T; Kirby, Robert M

    2014-12-01

    In simulation science, computational scientists often study the behavior of their simulations by repeated solutions with variations in parameters and/or boundary values or initial conditions. Through such simulation ensembles, one can try to understand or quantify the variability or uncertainty in a solution as a function of the various inputs or model assumptions. In response to a growing interest in simulation ensembles, the visualization community has developed a suite of methods for allowing users to observe and understand the properties of these ensembles in an efficient and effective manner. An important aspect of visualizing simulations is the analysis of derived features, often represented as points, surfaces, or curves. In this paper, we present a novel, nonparametric method for summarizing ensembles of 2D and 3D curves. We propose an extension of a method from descriptive statistics, data depth, to curves. We also demonstrate a set of rendering and visualization strategies for showing rank statistics of an ensemble of curves, which is a generalization of traditional whisker plots or boxplots to multidimensional curves. Results are presented for applications in neuroimaging, hurricane forecasting and fluid dynamics.

  17. Analysis methodology for economic technical feasibility studies in offshore electrical generation systems; Metodologia de analisis para estudios de factibilidad tecnica economica en sistemas de generacion electrica costa fuera

    Energy Technology Data Exchange (ETDEWEB)

    Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2007-07-01

    An analysis methodology followed in the development of technique-economic feasibility studies of systems of electrical generation in offshore electrical installations is presented, including the obtaining of the curves of the turbine and generator performance, the technical considerations for the formulation of the operation scenes and the calculations of the economic evaluation of a real scenario. [Spanish] Se muestra una metodologia de analisis seguida en el desarrollo de estudios de factibilidad tecnica-economica de sistemas de generacion electrica en instalaciones electricas costa fuera, incluyendo la obtencion de las curvas de comportamiento de la turbina y el generador, las consideraciones tecnicas para la formulacion de los escenarios de operacion y los calculos de la evaluacion economica de un escenario real.

  18. Development of a tool for the analysis and diagnosis in real time of centrifugal pumps; Desarrollo en una herramienta para el analisis y diagnostico en tiempo real de bombas centrifugas

    Energy Technology Data Exchange (ETDEWEB)

    Pacheco, J.J.; Aviles, J.J.; Zaleta, A.; Olivares, A. [Facultad de Ingenieria Mecanica, Electrica y Electronica (FIMEE), Universidad de Guanajuato (Mexico)

    2007-11-15

    In this paper the development of a computer tool for the analysis of centrifugal pumps is presented. This tool allows the user to analyze the performance of the pump by means of the analysis of the behavior curves at its design conditions, reference and operation. In order to realize the analysis it is necessary that the user feeds the tool with the missing and necessary information according to norm ASME PTC 8.2 and under the specified conditions of calibration of the same norm, to eliminate possible errors in the results, a bad qualification or erroneous acquisition of the signals. The system must early be fed with the polynomials of the behavior curves of the pump in its design conditions to later correct the behavior based on a velocity of present operation. [Spanish] En este trabajo se presenta el desarrollo de una herramienta computacional para el analisis de bombas centrifugas. Dicha herramienta permite al usuario analizar el desempeno de la bomba mediante el analisis de las curvas de comportamiento en sus condiciones de diseno, referencia y operacion. Para realizar el analisis es necesario que el usuario alimente la herramienta con la informacion faltante y necesaria de acuerdo a la norma ASME PTC 8.2 y bajo las condiciones de calibracion especificadas en la misma norma, para eliminar posibles errores en los resultados a una mala calificacion o adquisicion erronea de las senales. El sistema tiene que ser anticipadamente alimentado con los polinomios de las curvas de comportamiento de la bomba en sus condiciones de diseno para posteriormente corregir el comportamiento en funcion de una velocidad de operacion actual.

  19. Considerations for reference pump curves

    International Nuclear Information System (INIS)

    Stockton, N.B.

    1992-01-01

    This paper examines problems associated with inservice testing (IST) of pumps to assess their hydraulic performance using reference pump curves to establish acceptance criteria. Safety-related pumps at nuclear power plants are tested under the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (the Code), Section 11. The Code requires testing pumps at specific reference points of differential pressure or flow rate that can be readily duplicated during subsequent tests. There are many cases where test conditions cannot be duplicated. For some pumps, such as service water or component cooling pumps, the flow rate at any time depends on plant conditions and the arrangement of multiple independent and constantly changing loads. System conditions cannot be controlled to duplicate a specific reference value. In these cases, utilities frequently request to use pump curves for comparison of test data for acceptance. There is no prescribed method for developing a pump reference curve. The methods vary and may yield substantially different results. Some results are conservative when compared to the Code requirements; some are not. The errors associated with different curve testing techniques should be understood and controlled within reasonable bounds. Manufacturer's pump curves, in general, are not sufficiently accurate to use as reference pump curves for IST. Testing using reference curves generated with polynomial least squares fits over limited ranges of pump operation, cubic spline interpolation, or cubic spline least squares fits can provide a measure of pump hydraulic performance that is at least as accurate as the Code required method. Regardless of the test method, error can be reduced by using more accurate instruments, by correcting for systematic errors, by increasing the number of data points, and by taking repetitive measurements at each data point

  20. ANALISIS LEMBAR KERJA SISWA DALAM MENINGKATKAN KOMUNIKASI MATEMATIS TULIS SISWA

    Directory of Open Access Journals (Sweden)

    Fimmatur Rizka Ardina

    2016-02-01

    Komunikasi merupakan suatu kemampuan yang penting untuk dimiliki setiap manusia. Komunikasi dalam artikel ini difokuskan pada komunikasi matematis tulis. Komunikasi matematis tulis ini akan berhubungan dengan lembar kerja siswa yang dipakai dalam proses pembelajaran. Tujuan penulisan artikel ini adalah untuk mendeskripsikan proses analisis LKS sebagai alat untuk meningkatkan komunikasi matematis tulis siswa. Jenis penelitian yang digunakan adalah kualitatif deskriptif. LKS akan dianalisis menggunakan standar indikator kemampuan komunikasi NCTM (2000 yang dimodifikasi sehingga terdapat empat indikator yaitu (1 siswa dapat menuliskan ide yang dimiliki dengan jelas dan tepat (2 siswa dapat menuliskan alasan untuk jawaban yang diberikan (3 siswa dapat memberikan tanggapan untuk ide atau jawaban siswa lain (4 siswa dapat menuliskan kembali ide orang lain menggunakan bahasanya sendiri. Berdasarkan hasil penelitian dapat disimpulkan bahwa LKS oleh Tim MGMP Kota Malang tidak dapat digunakan sebagai alternatif untuk meningkatkan kemmapuan komunikasi matematis tulis siswa.

  1. Analisis Implementasi Akuntansi Berbasis Akrual pada Inspektorat Jenderal Kementerian Keuangan

    Directory of Open Access Journals (Sweden)

    Eliada Herwiyanti

    2017-05-01

    Full Text Available Penelitian ini merupakan penelitian kualitatif terhadap penerapan Sistem Akuntansi Pemerintahan berbasis akrual di lingkungan Inspektorat Jenderal Kementerian Keuangan. Tujuan dari penelitian ini adalah untuk mengetahui bagaimana kesiapan dan penerapan SAP Berbasis Akrual di instansi tersebut. Data dalam penelitian ini dikumpulkan melalui observasi, studi kepustakaan, serta wawancara terhadap sepuluh orang informan yang terkait langsung dengan penerapan SAP berbasis akrual. Data yang telah dikumpulkan kemudian dianalisis dan diinterpretasikan secara naratif dengan menggunakan metode analisis data kualitatif yang direkomendasikan oleh Creswell (2012. Hasil penelitian ini menunjukkan bahwa secara umum, kesiapan Itjen Kemenkeu dalam menerapkan sistem akuntansi akrual sudah baik, mulai dari aspek komunikasi, sumber daya, komitmen organisasi, dan struktur birokrasi. Dengan kesiapan yang baik, penelitian ini juga menun­juk­kan bahwa penerapan sistem akuntansi akrual di Itjen Kemenkeu sudah dilakukan dengan sangat memuaskan, yang ditunjukkan dengan nilai sebesar 93,40%.

  2. ANALISIS PERANCANGAN BUSINESS INTELLIGENCE BERBASIS SAAS CLOUD COMPUTING

    Directory of Open Access Journals (Sweden)

    I Gede Adnyana

    2014-05-01

    Full Text Available Persaingan bisnis yang ketat, mendorong setiap perusahaan menyusun strategi bisnis agar dapat bertahan dari para pesaing. Penyusunan strategi bisnis mutlak memerlukan informasi yang tepat dan akurat, pengolahan hingga analisis data yang menghasilkan informasi yang tepat dan akurat menjadi proses yang sangat penting. Business Intelligence (BI menawarkan solusi bisnis untuk menganalisis data dan memungkinkan suatu perusahaan untuk mengambil keputusan untuk meningkatkan keuntungan dan kinerja bisnis. Namun, BI mahal untuk diimplementasikan, memerlukan biaya pemeliharaan yang tidak sedikit dan infrastruktur yang kuat. Hal ini mendorong perusahaan mengurangi biaya tetapi masih memiliki teknologi yang tepat untuk memungkinkan mereka untuk membuat keputusan, mengidentifikasi peluang dan proaktif mengidentifikasi risiko yang dapat mempengaruhi bisnis. Konsep Software as a Service (SaaS Cloud Computing dapat menjawab tantangan yang dihadapi BI. Sebelum merancang BI berbasis SaaS perlu diketahui parameter-parameter evaluasi hingga kelebihan dan kekurangannya.

  3. Analisis Kekuatan Struktur Pallet Menggunakan Metode Elemen Hingga

    Directory of Open Access Journals (Sweden)

    Tria Mariz Arief

    2015-07-01

    Full Text Available Pallet sebagai suatu alat bantu untuk mempermudah proses bongkar-muat logistik. Palletdigunakan hampir dalam berbagai lingkungan transportasi logistik. Pada bahasan berikutdikhususkan dalam lingkup transportasi di dalam pesawat udara khususnya pada pesawatangkut militer. Di lingkungan militer pallet digunakan untuk transport logistik baik secara normalmuat (loading dan bongkar (unloading maupun kondisi bongkar dengan diterjunkan daripesawat udara. Untuk pemenuhan penggunaan tersebut dilakukan perancangan ulang (reverseengineering struktur pallet yang dapat dimanufaktur secara lokal. Hipotesis awal menunjukkanbahwa berdasarkan kondisi pembebanan pada pallet dapat diperkirakan bahwa kondisitegangan dan regangan maksimum akan terjadi pada posisi sudut struktur pallet yang ditransferbebannya ke komponen plat besi penahan siku-siku dan baut. Material yang digunakan padastruktur pallet adalah Allumunium Alloy 7075-T6 dengan kekuatan tarik sebesar 503 MPa.Analisis dilakukan dengan menggunakan simulasi numerik dengan metoda elemen hingga(FEM. Proses simulasi numerik kekuatan struktur pallet difokuskan pada pembebanan statis(termasuk pengaruh factor G dalam interval beban statis 4 ton sampai 7 ton. Analisis dilakukanpada perubahan variabel tegangan dan regangan terhadap variasi beban yang diberikan untukmendapatkan tingkat keamanan struktur (margin safety. Pemodelan dilakukan denganidealisasi model ¼ bagian menggunakan elemen terstruktur dengan jenis elemen hexahedral(brick dengan jumlah 73803 elemen dan 360323 node. Hasil analisis menunjukkan teganganekuivalen maksimum struktur Pallet adalah 94 MPa yang terjadi di penguat sudut (anglebracket. Sedangkan pada struktur penguat lapis (sandwich structure berbahan thick blockyang mempunyai kekuatan sebesar 20 MPa adalah sebesar 0.84 MPa. Tingkat keamanansecara keseluruhan struktur dengan mempertimbangkan factor G hingga 2 adalah 5.3.Kata kunci: Analisis struktur, pallet, logistik, reverse engineering, FEM

  4. Curve Digitizer – A software for multiple curves digitizing

    Directory of Open Access Journals (Sweden)

    Florentin ŞPERLEA

    2010-06-01

    Full Text Available The Curve Digitizer is software that extracts data from an image file representing a graphicand returns them as pairs of numbers which can then be used for further analysis and applications.Numbers can be read on a computer screen stored in files or copied on paper. The final result is adata set that can be used with other tools such as MSEXCEL. Curve Digitizer provides a useful toolfor any researcher or engineer interested in quantifying the data displayed graphically. The image filecan be obtained by scanning a document

  5. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI INDEPENDENSI PENAMPILAN AKUNTAN PUBLIK

    Directory of Open Access Journals (Sweden)

    Ardiani Ika S.

    2012-03-01

    Full Text Available Tujuan dari penelitian ini adalah untuk menguji secara empiris faktor-faktor yang mempengaruhi independensi penampilan akuntan publik baik secara parsial dan simultan. Faktor-faktor tersebut adalah financial interests, hubungan bisnis dengan klien, pelayanan asuransi dan audit, hubungan antara klien atau yg diaudit dengan auditor, kompetisi antara Kantor Akuntan Publik (KAP, ukuran KAP dan audit fee. Populasi dalam penelitian ini adalah para auditor di akuntan publik di Semarang tahun 2009. Metode penyeleksian sampel yang digunakan adalah convenience sampling dan jumlah respondennya 35. Alat analisis yang digunakan adalah multiple regression analysis. Dimulai dengan analisis kuantitatif untuk mengetes validitas dan reabilitas. Kemudian dilanjutkan uji asumsi klasik termasuk normality, multicollinearity, and heteroscedastisity. Hasil menunjukkan bahwa 6 variabel yang sudah dikaji secara simultan dan partial tersebut mempunyai efek yang signifikan terhadap independensi penampilan akuntan publik dengan R square 0.749. The objective of this study is to test empirically the factors that influence the independence of public accountant appearance both partially and simultaneously. The factors cover financial interests, business relationships with clients, assurance services and audit services, the length of relationship between client or auditee and auditor, the competition between Public Accountan Offices (KAPs, the size of KAP, and audit fee. The population in this study was the auditors who worked in the public accountant’s office in Semarang in 2009. The sample selection method is a convenience sampling and the  number of  respondents are 35. The Analysis tools used is multiple regression analysis. It starts by applying quantitative analysis to test the validity and reliability. Then, it is continued by testing the classical assumptions which include normality, multicollinearity, and heteroscedastisity. The result shows that the six

  6. ENCAPAI SUMBER DAYA MANUSIA UNGGUL (ANALISIS KINERJA DAN KUALITAS PELAYANAN

    Directory of Open Access Journals (Sweden)

    Ketut Sudarma

    2012-03-01

    Full Text Available Penelitian ini  bertujuan untuk menganalisis pengaruh kemampuan individu, kepuasan kerja, komitmen organisasi terhadap kinerja dan kinerja terhadap kualitas pelayanan. Sampel penelitian berjumlah 76 orang. Teknik pengambilan sampel menggunakan proportional random sampling. Variabel penelitian terdiri dari kemampuan individu, kepuasan kerja, komitmen organisasi, dan kinerja serta kualitas pelayanan  Analisis data menggunakan regresi dua tahap. Hasil penelitian menunjukkan bahwa kemampuan individu, kepuasan kerja dan komitmen organisasi mempunyai pengaruh positif signifikan terhadap kinerja dan kinerja berpengaruh positif signifikan terhadap kualitas pelayanan. Ini berarti semakin meningkat kinerja, maka semakin meningkat juga kualitas pelayanan. Dari hasil analisis deskriptif persentase tampak secara rata-rata  semua variabel penelitian  menunjukkan kategori baik, namun pada aspek-aspek tertentu pada masing-masing variabel masih terdapat kekurangan. Hasil penelitian ini diharapkan dapat menjadi masukan bagi pimpinan dalam meningkatkan kinerja dan kualitas pelayanan. Upaya perbaikan dimulai dari peningkatan kemampuan melalui pendidikan dan latihan, monitoring pelaksanaan kerja secara rutin, menumbuhkan komitmen kerja dan perbaikan standar operasi prosedur.The aim of the study is toanalyze the influence of individual abilities, job satisfaction, organizational commitment to performanceand performance againstservice quality. This samplingmethod is using 76 samples by the proportionalrandom sampling techniques. Variables consisted of individual ability, job satisfaction, organizational commitment, and performance andservice qualitydata analysisusingtwo-stageregression. The results showedthat theability of individuals, job satisfaction and organizational commitment had asignificant positive effecton performance and the performance ofa significant positive effecton quality of service. It means the higher performance, the higher service

  7. Il difficile cammino dell’analisi musicale in Italia

    Directory of Open Access Journals (Sweden)

    Claudio Annibaldi

    2014-10-01

    Full Text Available Si immaginino gli atti d’un convegno sull’analisi musicale che abbia avuto luogo in un paese come la Francia, la Germania, l’ Inghilterra o gli Stati Uniti. Potrebbe mai accadere che essi vengano pubblicati sostituendo il discorso ufficiale d’apertura dei lavori con un testo tutto nuovo epperò simulante d’esser quello effettivamente pronunciato dall’autore? E potrebbe mai accadere - essendo costui un noto critico musicale e il direttore della collana editoriale comprendente gli atti in questione - che questo nuovo testo sia da lui dedicato a uno sfoggio della propria competenza analitica capace solo di esibire una visione dilettantesca della tecnica musicale tout court? Penso proprio di no. Eppure questo è accaduto in Italia non molti anni fa, quando le Edizioni Unicopli pubblicarono, nella collana dei "Quaderni di Musica/Realtà", gli atti di un convegno sull’analisi musicale tenuto nel 1989 a Reggio Emilia: il primo del genere negli annali della musicologia italiana. L’episodio rende bene l’idea dei pericoli incombenti sul cammino di quegli studiosi che, a far data dal convegno suddetto, si sono adoperati a che la pratica analitica acquisisse anche da noi la dignità scientifica di cui gode, appunto, in paesi come la Francia, la Germania, l’Inghilterra o gli Stati Uniti. Quei pericoli si chiamano ‘dilettantismo tecnico’, ‘arroganza intellettuale’, ‘ vezzo d’ imporre l’uno e l’altra grazie a un qualche tipo di potere personale’, ‘necessità di subire tale imposizione in cambio di qualche vantaggio pratico’.

  8. ANALISIS KENDALA POTENSIAL PENERAPAN TOTAL QUALITY MANAGEMENT HOTEL PLAZA SEMARANG

    Directory of Open Access Journals (Sweden)

    Hendrajaya -

    2010-03-01

    Full Text Available Penelitian ini bertujuan untuk menemukan faktor-faktor yang terbentuk dari kendala penerapan Total Quality Management (TQM, sebagai upaya untuk menganalisis masalah-masalah potensial dari penerapan TQM di Hotel Plaza, Semarang. Sampel dari penelitian ini sejumlah 65 karyawan Hotel Plaza, Semarang yang terdiri dari manajer dan staf. Teknik analisis menggunakan Faktor Analisis. Hasil penelitian menunjukkan, bahwa kendala potensial dari implementasi TQM dapat disimpulkan menjadi lima faktor, yaitu faktor inkonsistensi, visi-misi, transformasi budaya, manajerial dan manajemen kualitas. Penelitian ini memberikan rekomendasi bahwa peningkatan fungsi-fungsi korporat melalui optimalisasi kualitas sebagai strategi bisnis dan orientasi pada kepuasan konsumen dengan melibatkan seluruh anggota organisasi, akan menjadi dasar untuk memaksimalkan daya saing perusahaan dalam hal produk, layanan, SDM, lingkungan dan seluruh proses yang dapat mendukung upaya perbaikan produktivitas. This study aims to determine the constraint factors and to analyze the potential problems of TQM implementation of Plaza Semarang Hotel. The sample of 65 employees of TQM implementation of Plaza Semarang Hotel, consist of managers and staffs. Factor analysis is used to achieve the results of the potential constraint implementation of Total Quality Management which can be summarized into five factors, they are: the factor of inconsistencies, the factor of vision and mission, cultural transformation factors, managerial factors and the factors of quality management. In order to increase the corporate functions through the optimization of quality as a business strategy and to achieve customer satisfaction, this study suggests that all members of the organization should be involved by the company as on-going basis to maximize the competitiveness of the organization on products, services, human resources, environment and all processes that support productivity improvement.

  9. Perumusan Strategi Bersaing pada Perusahaan Ban dengan Metode Analisis Portofolio Produk (Studi Kasus: PT Multistrada Arah Sarana, Tbk

    Directory of Open Access Journals (Sweden)

    Nathanael August Zefanya

    2017-01-01

    Full Text Available Industri ban di Indonesia mengalami perkembangan pesat dalam kurun waktu 10 tahun terakhir. Namun, terjadinya krisis ekonomi global menjadi penyebab menurunnya pendapatan, salah satunya adalah PT MASA dengan produk utamanya yaitu ban mobil Achilles dan ban motor Corsa yang digunakan sebagai objek penelitian ini. Telah diilakukan analisis PESTEL dan Porter’s Five Forces, identifikasi faktor lingkungan internal dan eksternal dengan analisis SWOT serta merumuskan alternatif strategi bersaing untuk direkomendasikan kepada PT MASA. Perumusan strategi alternatif didapat dari hasil analisis Matriks BCG dan Matriks IE sebagai analisis portofolio untuk mendapatkan tema strategi alternatif dalam pembuatan Matriks SWOT. Strategi alternatif kemudian diperingkatkan dengan QSPM dan dilanjutkan pembuatan rencana aksi bagi PT MASA dalam waktu 5 tahun ke depan. Setelah dilakukan analisis industri, diketahui bahwa ancaman terbesar datang dari pesaing produsen ban. Dari hasil analisis portofolio, PT MASA berada di kuadran I karena memiliki koordinat IFE serta EFE 3,32 dan 3,26. Dari hasil analisis Matriks IE, PT MASA direkomendasikan untuk melakukan strategi grow and build. Hasil Matriks BCG menunjukkan bahwa Achilles berada di dogs, sementara Corsa berada di question marks. Terdapat 13 strategi alternatif hasil dari formulasi strategi dengan menggunakan matriks TOWS. Dari hasil analisis QSPM, terdapat 7 alternatif strategi terbaik dan rencana aksi..

  10. Analysis of production data and fluid thermodynamic conditions in wells of Los Humeros, Pue; Analisis de datos de produccion y condiciones termodinamicas del fluido de alimentacion de pozos de Los Humeros, Pue.

    Energy Technology Data Exchange (ETDEWEB)

    Arellano Gomez, Victor Manuel; Aragon Aguilar, Alfonso; Barragan Reyes, Rosa Maria [Instituto de Investigaciones Electricas, Gerencia de Geotermia, Cuernavaca, Morelos (Mexico); Flores Armenta, Magaly; Ramirez Montes, Miguel [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico); Tovar Aguado, Rigoberto [Comision Federal de Electricidad (Mexico)]. E-mail: vag@iie.org.mx

    2008-07-15

    Production data from 22 wells of the Los Humeros geothermal field in Puebla, Mexico, were analyzed to estimate the thermodynamic conditions (pressure and enthalpy) of the bottom-hole fluids entering the wells and the changes to the fluids after exploitation. The bottom-well conditions were obtained by simulating the production histories of the wells, using the WELLSIM numerical simulator. The reservoir temperature was estimated by the FT-HSH2 gas-equilibrium method, which provided values matching very well the measured-well temperatures under static conditions. To estimate the rates of change of the well-bottom thermodynamic variables-pressure and enthalpy-the linear and the harmonic methods were used. According to these models, overall results indicated pressure-decline rates of between 0.92 (linear method) and 1.03 bar/year (harmonic method), average enthalpy increases of between 9.4 (linear) and 10.3 (harmonic) kJ/kg/year, and a temperature increase of about 1.2 degrees Celsius/year (linear method). These rates of parameter change were considered moderate, likely due to recharge from the deeper reservoir. The wells showing higher-pressure declines were H-35, H-1, and H-1D; and the wells showing higher-enthalpy increases were H-1D, H-3D, and H-19D. Most wells showed temperature increases, although a temperature decrease was noticed in wells H-16R and H-36, probably due to mechanical damage in the wells or weak communication with the deeper reservoir. [Spanish] Se realizo un analisis de los datos de produccion de 22 pozos del campo geotermico de Los Humeros, Pue., Mexico, con objeto de estimar las condiciones termodinamicas (presion y entalpia) de sus fluidos de alimentacion y su evolucion en el tiempo como respuesta a la explotacion. Las condiciones a fondo de pozo se obtuvieron al simular las historias de produccion de los pozos mediante el simulador numerico WELLSIM. La temperatura de fondo se estimo mediante el metodo de equilibrio gaseoso FT-HSH2 ya que fue

  11. Calibration curves for biological dosimetry

    International Nuclear Information System (INIS)

    Guerrero C, C.; Brena V, M. . E-mail cgc@nuclear.inin.mx

    2004-01-01

    The generated information by the investigations in different laboratories of the world, included the ININ, in which settles down that certain class of chromosomal leisure it increases in function of the dose and radiation type, has given by result the obtaining of calibrated curves that are applied in the well-known technique as biological dosimetry. In this work is presented a summary of the work made in the laboratory that includes the calibrated curves for gamma radiation of 60 Cobalt and X rays of 250 k Vp, examples of presumed exposure to ionizing radiation, resolved by means of aberration analysis and the corresponding dose estimate through the equations of the respective curves and finally a comparison among the dose calculations in those people affected by the accident of Ciudad Juarez, carried out by the group of Oak Ridge, USA and those obtained in this laboratory. (Author)

  12. Vertex algebras and algebraic curves

    CERN Document Server

    Frenkel, Edward

    2004-01-01

    Vertex algebras are algebraic objects that encapsulate the concept of operator product expansion from two-dimensional conformal field theory. Vertex algebras are fast becoming ubiquitous in many areas of modern mathematics, with applications to representation theory, algebraic geometry, the theory of finite groups, modular functions, topology, integrable systems, and combinatorics. This book is an introduction to the theory of vertex algebras with a particular emphasis on the relationship with the geometry of algebraic curves. The notion of a vertex algebra is introduced in a coordinate-independent way, so that vertex operators become well defined on arbitrary smooth algebraic curves, possibly equipped with additional data, such as a vector bundle. Vertex algebras then appear as the algebraic objects encoding the geometric structure of various moduli spaces associated with algebraic curves. Therefore they may be used to give a geometric interpretation of various questions of representation theory. The book co...

  13. Curve collection, extension of databases

    International Nuclear Information System (INIS)

    Gillemot, F.

    1992-01-01

    Full text: Databases: generally calculated data only. The original measurements: diagrams. Information loss between them Expensive research eg. irradiation, aging, creep etc. Original curves should be stored for reanalysing. The format of the stored curves: a. Data in ASCII files, only numbers b. Other information in strings in a second file Same name, but different extension. Extensions shows the type of the test and the type of the file. EXAMPLES. TEN is tensile information, TED is tensile data, CHN is Charpy informations, CHD is Charpy data. Storing techniques: digitalised measurements, digitalising old curves stored on paper. Use: making catalogues, reanalysing, comparison with new data. Tools: mathematical software packages like quattro, genplot, exel, mathcad, qbasic, pascal, fortran, mathlab, grapher etc. (author)

  14. Rational points on elliptic curves

    CERN Document Server

    Silverman, Joseph H

    2015-01-01

    The theory of elliptic curves involves a pleasing blend of algebra, geometry, analysis, and number theory. This book stresses this interplay as it develops the basic theory, thereby providing an opportunity for advanced undergraduates to appreciate the unity of modern mathematics. At the same time, every effort has been made to use only methods and results commonly included in the undergraduate curriculum. This accessibility, the informal writing style, and a wealth of exercises make Rational Points on Elliptic Curves an ideal introduction for students at all levels who are interested in learning about Diophantine equations and arithmetic geometry. Most concretely, an elliptic curve is the set of zeroes of a cubic polynomial in two variables. If the polynomial has rational coefficients, then one can ask for a description of those zeroes whose coordinates are either integers or rational numbers. It is this number theoretic question that is the main subject of this book. Topics covered include the geometry and ...

  15. Theoretical melting curve of caesium

    International Nuclear Information System (INIS)

    Simozar, S.; Girifalco, L.A.; Pennsylvania Univ., Philadelphia

    1983-01-01

    A statistical-mechanical model is developed to account for the complex melting curve of caesium. The model assumes the existence of three different species of caesium defined by three different electronic states. On the basis of this model, the free energy of melting and the melting curve are computed up to 60 kbar, using the solid-state data and the initial slope of the fusion curve as input parameters. The calculated phase diagram agrees with experiment to within the experimental error. Other thermodynamic properties including the entropy and volume of melting were also computed, and they agree with experiment. Since the theory requires only one adjustable constant, this is taken as strong evidence that the three-species model is satisfactory for caesium. (author)

  16. Migration and the Wage Curve:

    DEFF Research Database (Denmark)

    Brücker, Herbert; Jahn, Elke J.

    in a general equilibrium framework. For the empirical analysis we employ the IABS, a two percent sample of the German labor force. We find that the elasticity of the wage curve is particularly high for young workers and workers with a university degree, while it is low for older workers and workers......  Based on a wage curve approach we examine the labor market effects of migration in Germany. The wage curve relies on the assumption that wages respond to a change in the unemployment rate, albeit imperfectly. This allows one to derive the wage and employment effects of migration simultaneously...... with a vocational degree. The wage and employment effects of migration are moderate: a 1 percent increase in the German labor force through immigration increases the aggregate unemployment rate by less than 0.1 percentage points and reduces average wages by less 0.1 percent. While native workers benefit from...

  17. Laffer Curves and Home Production

    Directory of Open Access Journals (Sweden)

    Kotamäki Mauri

    2017-06-01

    Full Text Available In the earlier related literature, consumption tax rate Laffer curve is found to be strictly increasing (see Trabandt and Uhlig (2011. In this paper, a general equilibrium macro model is augmented by introducing a substitute for private consumption in the form of home production. The introduction of home production brings about an additional margin of adjustment – an increase in consumption tax rate not only decreases labor supply and reduces the consumption tax base but also allows a substitution of market goods with home-produced goods. The main objective of this paper is to show that, after the introduction of home production, the consumption tax Laffer curve exhibits an inverse U-shape. Also the income tax Laffer curves are significantly altered. The result shown in this paper casts doubt on some of the earlier results in the literature.

  18. Complexity of Curved Glass Structures

    Science.gov (United States)

    Kosić, T.; Svetel, I.; Cekić, Z.

    2017-11-01

    Despite the increasing number of research on the architectural structures of curvilinear forms and technological and practical improvement of the glass production observed over recent years, there is still a lack of comprehensive codes and standards, recommendations and experience data linked to real-life curved glass structures applications regarding design, manufacture, use, performance and economy. However, more and more complex buildings and structures with the large areas of glass envelope geometrically complex shape are built every year. The aim of the presented research is to collect data on the existing design philosophy on curved glass structure cases. The investigation includes a survey about how architects and engineers deal with different design aspects of curved glass structures with a special focus on the design and construction process, glass types and structural and fixing systems. The current paper gives a brief overview of the survey findings.

  19. Optimization on Spaces of Curves

    DEFF Research Database (Denmark)

    Møller-Andersen, Jakob

    in Rd, and methods to solve the initial and boundary value problem for geodesics allowing us to compute the Karcher mean and principal components analysis of data of curves. We apply the methods to study shape variation in synthetic data in the Kimia shape database, in HeLa cell nuclei and cycles...... of cardiac deformations. Finally we investigate a new application of Riemannian shape analysis in shape optimization. We setup a simple elliptic model problem, and describe how to apply shape calculus to obtain directional derivatives in the manifold of planar curves. We present an implementation based...

  20. Tracing a planar algebraic curve

    International Nuclear Information System (INIS)

    Chen Falai; Kozak, J.

    1994-09-01

    In this paper, an algorithm that determines a real algebraic curve is outlined. Its basic step is to divide the plane into subdomains that include only simple branches of the algebraic curve without singular points. Each of the branches is then stably and efficiently traced in the particular subdomain. Except for the tracing, the algorithm requires only a couple of simple operations on polynomials that can be carried out exactly if the coefficients are rational, and the determination of zeros of several polynomials of one variable. (author). 5 refs, 4 figs

  1. The New Keynesian Phillips Curve

    DEFF Research Database (Denmark)

    Ólafsson, Tjörvi

    This paper provides a survey on the recent literature on the new Keynesian Phillips curve: the controversies surrounding its microfoundation and estimation, the approaches that have been tried to improve its empirical fit and the challenges it faces adapting to the open-economy framework. The new......, learning or state-dependant pricing. The introduction of openeconomy factors into the new Keynesian Phillips curve complicate matters further as it must capture the nexus between price setting, inflation and the exchange rate. This is nevertheless a crucial feature for any model to be used for inflation...... forecasting in a small open economy like Iceland....

  2. Signature Curves Statistics of DNA Supercoils

    OpenAIRE

    Shakiban, Cheri; Lloyd, Peter

    2004-01-01

    In this paper we describe the Euclidean signature curves for two dimensional closed curves in the plane and their generalization to closed space curves. The focus will be on discrete numerical methods for approximating such curves. Further we will apply these numerical methods to plot the signature curves related to three-dimensional simulated DNA supercoils. Our primary focus will be on statistical analysis of the data generated for the signature curves of the supercoils. We will try to esta...

  3. Dual Smarandache Curves of a Timelike Curve lying on Unit dual Lorentzian Sphere

    OpenAIRE

    Kahraman, Tanju; Hüseyin Ugurlu, Hasan

    2016-01-01

    In this paper, we give Darboux approximation for dual Smarandache curves of time like curve on unit dual Lorentzian sphere. Firstly, we define the four types of dual Smarandache curves of a timelike curve lying on dual Lorentzian sphere.

  4. Electro-Mechanical Resonance Curves

    Science.gov (United States)

    Greenslade, Thomas B., Jr.

    2018-01-01

    Recently I have been investigating the frequency response of galvanometers. These are direct-current devices used to measure small currents. By using a low-frequency function generator to supply the alternating-current signal and a stopwatch smartphone app to measure the period, I was able to take data to allow a resonance curve to be drawn. This…

  5. Texas curve margin of safety.

    Science.gov (United States)

    2013-01-01

    This software can be used to assist with the assessment of margin of safety for a horizontal curve. It is intended for use by engineers and technicians responsible for safety analysis or management of rural highway pavement or traffic control devices...

  6. Principal Curves on Riemannian Manifolds.

    Science.gov (United States)

    Hauberg, Soren

    2016-09-01

    Euclidean statistics are often generalized to Riemannian manifolds by replacing straight-line interpolations with geodesic ones. While these Riemannian models are familiar-looking, they are restricted by the inflexibility of geodesics, and they rely on constructions which are optimal only in Euclidean domains. We consider extensions of Principal Component Analysis (PCA) to Riemannian manifolds. Classic Riemannian approaches seek a geodesic curve passing through the mean that optimizes a criteria of interest. The requirements that the solution both is geodesic and must pass through the mean tend to imply that the methods only work well when the manifold is mostly flat within the support of the generating distribution. We argue that instead of generalizing linear Euclidean models, it is more fruitful to generalize non-linear Euclidean models. Specifically, we extend the classic Principal Curves from Hastie & Stuetzle to data residing on a complete Riemannian manifold. We show that for elliptical distributions in the tangent of spaces of constant curvature, the standard principal geodesic is a principal curve. The proposed model is simple to compute and avoids many of the pitfalls of traditional geodesic approaches. We empirically demonstrate the effectiveness of the Riemannian principal curves on several manifolds and datasets.

  7. Elliptic curves and primality proving

    Science.gov (United States)

    Atkin, A. O. L.; Morain, F.

    1993-07-01

    The aim of this paper is to describe the theory and implementation of the Elliptic Curve Primality Proving algorithm. Problema, numeros primos a compositis dignoscendi, hosque in factores suos primos resolvendi, ad gravissima ac utilissima totius arithmeticae pertinere, et geometrarum tum veterum tum recentiorum industriam ac sagacitatem occupavisse, tam notum est, ut de hac re copiose loqui superfluum foret.

  8. A Curve for all Reasons

    Indian Academy of Sciences (India)

    from biology, feel that every pattern in the living world, ranging from the folding of ... curves band c have the same rate of increase but reach different asymptotes. If these .... not at x = 0, but at xo' which is the minimum size at birth that will permit ...

  9. Survival curves for irradiated cells

    International Nuclear Information System (INIS)

    Gibson, D.K.

    1975-01-01

    The subject of the lecture is the probability of survival of biological cells which have been subjected to ionising radiation. The basic mathematical theories of cell survival as a function of radiation dose are developed. A brief comparison with observed survival curves is made. (author)

  10. Mentorship, learning curves, and balance.

    Science.gov (United States)

    Cohen, Meryl S; Jacobs, Jeffrey P; Quintessenza, James A; Chai, Paul J; Lindberg, Harald L; Dickey, Jamie; Ungerleider, Ross M

    2007-09-01

    Professionals working in the arena of health care face a variety of challenges as their careers evolve and develop. In this review, we analyze the role of mentorship, learning curves, and balance in overcoming challenges that all such professionals are likely to encounter. These challenges can exist both in professional and personal life. As any professional involved in health care matures, complex professional skills must be mastered, and new professional skills must be acquired. These skills are both technical and judgmental. In most circumstances, these skills must be learned. In 2007, despite the continued need for obtaining new knowledge and learning new skills, the professional and public tolerance for a "learning curve" is much less than in previous decades. Mentorship is the key to success in these endeavours. The success of mentorship is two-sided, with responsibilities for both the mentor and the mentee. The benefits of this relationship must be bidirectional. It is the responsibility of both the student and the mentor to assure this bidirectional exchange of benefit. This relationship requires time, patience, dedication, and to some degree selflessness. This mentorship will ultimately be the best tool for mastering complex professional skills and maturing through various learning curves. Professional mentorship also requires that mentors identify and explicitly teach their mentees the relational skills and abilities inherent in learning the management of the triad of self, relationships with others, and professional responsibilities.Up to two decades ago, a learning curve was tolerated, and even expected, while professionals involved in healthcare developed the techniques that allowed for the treatment of previously untreatable diseases. Outcomes have now improved to the point that this type of learning curve is no longer acceptable to the public. Still, professionals must learn to perform and develop independence and confidence. The responsibility to

  11. Development of a computational model applied to a unitary 144 cm{sup 2} proton exchange membrane fuel cell; Desenvolvimento de um modelo numerico computacional aplicado a uma celula a combustivel unitaria de 144 CM{sup 2} tipo PEM

    Energy Technology Data Exchange (ETDEWEB)

    Robalinho, Eric

    2009-07-01

    This work presents the development of a numerical computer model and methodology to study and design polymeric exchange membrane fuel cell - PEM. For the validation of experimental results, a sequence of routines, appropriate to fit the data obtained in the laboratory, was described. At the computational implementation it was created a new strategy of coupling two 3-dimensional models to satisfy the requirements of the comprehensive model of the fuel cell, including its various geometries and materials, as well as the various physical and chemical processes simulated. To effective assessment of the real cell analogy with numerical model, numerical studies were carried out. Comparisons with values obtained in the literature, characterization of variables through laboratory experiments and estimates from models already tested in the literature were also performed. Regarding the experimental part, a prototype of a fuel cell unit of 144 cm of geometric area was designed, produced and operated at laboratory with the purpose of validating the numerical computer model proposed, with positive results. The results of simulations for the 2D and 3D geometries proposed are presented in the form of polarization curves, highlighting the catalytic layer model based on the geometry of agglomerates. Parametric and sensitivity studies are presented to illustrate the change in performance of the fuel cell studied. The final model is robust and useful as a tool for design and optimization of PEM type fuel cells in a wide range of operating conditions. (author)

  12. Development of a computational model applied to a unitary 144 CM{sup 2} proton exchange membrane fuel cell; Desenvolvimento de um modelo numerico computacional aplicado a uma celula a combustivel unitaria de 144 CM{sup 2} tipo PEM

    Energy Technology Data Exchange (ETDEWEB)

    Robalinho, Eric

    2009-07-01

    This work presents the development of a numerical computer model and methodology to study and design polymeric exchange membrane fuel cell - PEM. For the validation of experimental results, a sequence of routines, appropriate to fit the data obtained in the laboratory, was described. At the computational implementation it was created a new strategy of coupling two 3-dimensional models to satisfy the requirements of the comprehensive model of the fuel cell, including its various geometries and materials, as well as the various physical and chemical processes simulated. To effective assessment of the real cell analogy with numerical model, numerical studies were carried out. Comparisons with values obtained in the literature, characterization of variables through laboratory experiments and estimates from models already tested in the literature were also performed. Regarding the experimental part, a prototype of a fuel cell unit of 144 cm{sup 2} of geometric area was designed, produced and operated at laboratory with the purpose of validating the numerical computer model proposed, with positive results. The results of simulations for the 2D and 3D geometries proposed are presented in the form of polarization curves, highlighting the catalytic layer model based on the geometry of agglomerates. Parametric and sensitivity studies are presented to illustrate the change in performance of the fuel cell studied. The final model is robust and useful as a tool for design and optimization of PEM type fuel cells in a wide range of operating conditions. (author)

  13. The Analisis Sentimen Sosial Media Twitter Dengan Algoritma Machine Learning Menggunakan Software R

    Directory of Open Access Journals (Sweden)

    Jaka Aulia Pratama

    2017-10-01

    Full Text Available Media sosial adalah wadah untuk mengungkapkan opini terhadap suatu topik tertentu. Ketersediaan informasi dan opini dari para pengguna media sosial merupakan kumpulan dokumen data berupa teks yang amat sangat besar dan berguna untuk kepentingan penelitian maupun membuat suatu keputusan bagi pihak – pihak tertentu. Text Mining bisa didefinisikan sebagai proses penggalian informasi di mana pengguna berinteraksi dengan kumpulan dokumen dari waktu ke waktu dengan menggunakan suatu alat analisis. Analisis sentimen atau Opinion Mining adalah salah satu studi di bidang komputasi yang berhubungan dengan kasus publik mengenai opini, penilaian, sikap, dan emosi. Penelitian ini akan menggunakan metode Machine Learning pada analisis sentimen pengguna layanan jejaring sosial Twitter terhadap Donald Trump dan Barack Obama dalam 20000 tweets. Nilai akurasi metode Machine Learning yang diperoleh cukup tinggi yaitu 87.52% untuk Data Training dan 87.4% untuk Data Testing.

  14. ANALISIS KELAYAKAN FINANSIAL PROYEK NARROWNECK PRESS AND BLOW UNTUK PROSES PRODUKSIBOTOL MINUMAN BERENERGI DI PT. ABC

    Directory of Open Access Journals (Sweden)

    Toni MT Munthe

    2015-08-01

    Full Text Available PT. ABC merupakan salah satu pabrik yang memproduksi botol kemasan kaca. Penelitian ini bertujuan untuk mengetahui layak atau tidaknya rencana investasi pada proyek Narrow Neck Press and Blow secara finansial di PT. ABC pada periode bulan April 2014 hingga bulan Juni 2014. Analisis kelayakan finansial proyek Narrow Neck Press and Blow, menggunakan metode analisis Net Present Value, Internal Rate of Return, Payback Period dan Sensitivity Analysis. Perbedaan antara nilai sekarang dari semua kas masuk dengan nilai sekarang dari semua kas keluar dari suatu proyek atau suatu investasi diperoleh dengan metode NPV, sedangkan untuk mencari tingkat bunga yang menyamakan nilai sekarang dari aliran kas bersih dan investasi diperoleh dengan metode IRR. Metode analisis yang dapat digunakan untuk mengetahui berapa lamakah waktu yang diperlukan untuk menutup dana yang dikeluarkan untuk suatu proyek dapat diperoleh dengan metode Payback Period. Setelah itu, dilakukan pengujian menggunakan sensitivitas analisis untuk mengetahui tingkat sensitivitas untuk tiap-tiap parameter terhadap persentase kenaikan dan penurunan. Dari hasil analisis data diperoleh nilai NPV sebesar Rp. 1.179.728.649.900,06, nilai IRR sebesar 56,36% dan periode pengembalian terletak pada 2 tahun 2 bulan 9 hari. Dengan menggunakan analisis sensitivitas dapat diketahui bahwa proyek ini sangat sensitif terhadap penurunan volume produksi. Berdasarkan hasil perhitungan, titik impas akan dicapai apabila volume produksi 213.403.267 unit per tahun atau 88,92% dari volume produksi awal. Nilai ini menunjukkan bahwa apabila volume produksi pada suatu periode mengalami penurunan lebih dari 11,08% dari volume produksi awal, maka investasi tersebut akan merugikan.

  15. STUDI PERBANDINGAN ANALISIS UNSUR PLUMBUM (PB DARI HASIL ELEKTROLISIS ANTARA METODE LASER- INDUCED BREAKDOWN SPECTROSCOPY (LIBS DENGAN METODE KONVENSIONAL

    Directory of Open Access Journals (Sweden)

    H. S. Suyanto

    2014-07-01

    Full Text Available Penelitian ini bertujuan menganalisis unsur Pb hasil proses elektrolisis dengan metode alternatif laser-induced breakdown spectroscopy (LIBS dan metode konvensional. Elektrolisis menggunakan tembaga (Cu sebagai katoda dan karbon sebagai anoda. Unsur Pb yang terdeposisi pada katoda diirradiasi laser Nd-YAG (model CFR 200, 1064nm dan emisinya (Pb I 405.7 nm ditangkap spektrometer HR 2500++ yang kemudian ditampilkan dalam intensitas fungsi panjang gelombang. Hasil penelitian menunjukkan bahwa energi laser, arus listrik dan waktu deposisi proses elektrolisis yang optimum untuk karakterisasi unsur Pb masing - masing adalah 100 mJ, 5,28 mA dan 15 menit. Aplikasi metode ini untuk analisis kuantitatif larutan Pb dengan membuat kurva kalibrasi dari kosentrasi 300 ppm sampai kosentrasi terendah yaitu 0,5 ppm, serta diperoleh deteksi limit sebesar 0,44 ppm. Sebagai perbandingan metode deteksi dengan LIBS ini telah dilakukan analisis dengan metode konvensional dengan menentukan selisih massa katoda sebelum dan sesudah elektrolisis dan diperoleh hasil yang sebanding.ABSTRACTThe aim of this research was to compare between a method of laser-induced breakdown spectroscopy (LIBS and the conventional one to analyse of Plumbum (Pb element resulted from electrolysis process. Electrolysis used copper (Cu and carbon (C as cathode and anode respectively. Plumbum element which was deposited on cathode was irradiated by Nd-YAG laser (model CFR 200, 1064nm and its emission intensity of neutral Pb I 405.7 nm in the plasma was captured by HR 2500++ spectrometer and displayed in a form of intensity as a function of wavelength. The experiment result showed that the optimum condition parameters of electrolysis: laser energy, electric current and electrolysis time duration were 100 mJ, 5.28 mA and 15 minutes respectively. An application of these conditions was done to make calibration curve of Pb element in liquid sample from 300 ppm to 0.5 ppm and resulted a limit of

  16. Conceptual and numerical models of groundwater flow and solute transport in fracture zones: Application to the Aspo Island (Sweden); Modelos conceptuales y numericos de flujo y transporte de solutos en zonas de fractura: aplicacion a la isla de Aspo (Suecia)

    Energy Technology Data Exchange (ETDEWEB)

    Molinero, J.; Samper, J.

    2003-07-01

    Several countries around the world are considering the final disposal of high-level radioactive waste in deep repositories located in fractured granite formations. Evaluating the long term safety of such repositories requires sound conceptual and numerical models which must consider simultaneously groundwater flow, solute transport and chemical and radiological processes. These models are being developed from data and knowledge gained from in situ experiments carried out at deep underground laboratories such as that of Aspo, Sweden, constructed in fractured granite. The Redox Zone Experiment is one of such experiments performed at Aspo in order to evaluate the effects of the construction of the access tunnel on the hydrogeological and hydrochemical conditions of a fracture zone intersected by the tunnel. Previous authors interpreted hydrochemical and isotopic data of this experiment using a mass-balance approach based on a qualitative description of groundwater flow conditions. Such an interpretation, however, is subject to uncertainties related to an over-simplified conceptualization of groundwater flow. Here we present numerical models of groundwater flow and solute transport for this fracture zone. The first model is based on previously published conceptual model. It presents noticeable un consistencies and fails to match simultaneously observed draw downs and chloride breakthrough curves. To overcome its limitations, a revised flow and transport model is presented which relies directly on available hydrodynamic and transport parameters, is based on the identification of appropriate flow and transport boundary conditions and uses, when needed, solute data extrapolated from nearby fracture zones. A significant quantitative improvement is achieved with the revised model because its results match simultaneously drawdown and chloride data. Other improvements are qualitative and include: ensuring consistency of hydrodynamic and hydrochemical data and avoiding

  17. ANALISIS PENGARUH VARIABILITAS TANAH PADA VARIABILITAS SPEKTRUM RESPON GEMPABUMI

    Directory of Open Access Journals (Sweden)

    I Nyoman Sukanta

    2010-11-01

    Full Text Available Salah satu komplek perkantoran yang terletak di Jalan Thamrin, Jakarta, dipilih sebagai lokasi penelitian. Hasil pemodelan data tanah, menghasilkan 3 lapisan tanah yang berbeda dengan kriteria jenis tanahnya cenderung lunak, dengan nilai N-SPT rata–rata = 11,23. Perhitungan percepatan puncak muka tanah (PGA dan nilai spektrum respon di permukaan tanah menggunakan metoda analisis linier equivalen dengan simulasi Monte Carlo. Program aplikasi SHAKE2000 merupakan alat bantu dalam simulasi, dengan memasukkan beberapa asumsi sebagai data masukan. Data masukan dinamik menggunakan sumber gempabumi Elcentro dan Mexico yang mempunyai kandungan frekuensi berbeda. Asumsi nilai percepatan puncak batuan dasar (PBA untuk kedua sumber gempabumi tersebut sebesar 0,18 g. Hasil analisis menunjukkan nilai spektrum respon dan percepatan puncak muka tanah sangat bervariasi. Gempabumi Elcentro menghasilkan nilai rata–rata PGA = 0,36 g dengan spektrum responnya = 1,0 g  pada Tc = 0,6 detik. Untuk gempabumi Mexico menghasilkan nilai rata–rata PGA = 0,30 g dengan spektrum responnya = 0,9 g pada Tc = 0,6 detik. Artinya, variabilitas jenis tanah sangat berpengaruh tehadap variabilitas spektrum respon di permukaan tanah.   One of the office complex located at Jalan Thamrin, Jakarta, was chosen as the location of the reseach. Results of data modeling soil, produces 3 different soil layers with soil type criteria tend to be soft, with a value of N-SPT  average = 11.23. Calculation of peak ground acceleration (PGA and the value of the response spectrum at ground surface using the method of equivalent linear analysis with Monte Carlo simulation. SHAKE2000 application software  is a tool in the simulation, by including some assumptions as input data. Dynamic input data using Elcentro and Mexican  earthquakes  which have different frequency contents. Assumed value of peak base acceleration (PBA for the two earthquakes was 0.18 g. The result of analysis was the value

  18. LA COMUNICAZIONE POLITICA SUI SOCIAL NETWORK: UN’ANALISI LINGUISTICA

    Directory of Open Access Journals (Sweden)

    Daniele Spoladore

    2014-07-01

    Full Text Available Questo lavoro si propone di analizzare le scelte linguistiche dei soggetti politici che utilizzano Facebook e Twitter per rivolgersi al sempre più frammentato panorama dei potenziali elettori. In particolare, analizza le tendenze linguistiche comuni che questi social network hanno fatto emergere nel rapporto tra politica, web e lettori. Cominciando dall’analisi della presenza di parlamentari e senatori su Facebook e Twitter, si cerca di riassumere le principali caratteristiche delle due piattaforme, per giungere ad una classificazione dei testi prodotti attraverso di esse; si analizza la scrittura di post e tweet, sottolineando la presenza di espedienti tipici del mezzo e valutando il loro effetto sui lettori, e si studiano le scelte sintattiche e morfosintattiche in relazione alla struttura e alle possibilità dei due social network. In ultima analisi si osservano le scelte lessicali dei soggetti politici, studiandone i campi semantici e la quantità di tecnicismi. Infine, si cerca di compiere una valutazione delle due differenti tipologie di trasmesso scritto rinvenute nei campioni, osservando come ognuna di esse abbia uno scopo ben preciso nell’economia della comunicazione politica sui social network. Political communication policy in social networks: a language analysis  Daniele Spoladore This paper aims to analyze the linguistic choices of politicians who use Facebook and Twitter to address the increasingly fragmented landscape of potential voters. In particular, it analyzes the common language trends that these social networks have revealed in the relationship between politics, the web and readers. Starting from the analysis of the presence of MPs and senators on Facebook and Twitter, we try to summarize the key features of the two platforms, in order to arrive at a classification of the texts produced using them.  We analyzed posts and tweets, emphasizing the  typical characteristics of these means and evaluating their effect on

  19. Analisis komoditas unggulan perikanan budidaya Kabupaten Pidie Jaya

    Directory of Open Access Journals (Sweden)

    Farok Afero

    2015-06-01

    Full Text Available Abstract. Snapper (Lates calcarifer, grouper (Epinephelus coioides, tiger shrimp (Penaeus monodon, vannamei shrimp (Litopenaeus vannamei and tilapia (Oreochromis niloticus are leading commodity worthly cultivated in Pidie Jaya. Bandar Baru and Tringgadeng an appropriate areas for black tiger shrimp while Jangka Buya and Ulim approriate areas for vannamei cultivation. AHP analysis showed black tiger shrimp is top priority based on the economic value while vannamei shrimp is top priority based on enterprise sustainability. Financial analysis of snapper, grouper, black tiger shrimp, vannamei shrimp and tilapia farming generated positive cash flow and NPV, IRR > 100%, the ratio of benefit to cost of production > 1,30 and payback period of investment costs  < 1 year, thus demonstrating the feasibility of cultivation of these leading commodities. Vannamei shrimp cultivation showed positive prospect as long the market offers premium price. Grouper and snapper had a positive outlook because high demand of high-quality fish in the international market. Keywords: Leading commodity; financial analysis; aquaculture; Pidie Jaya Abstrak. Komoditas kakap (Lates calcarifer, kerapu (Epinephelus coioides,udang windu (Penaeus monodon, udang vannamei (Litopenaeus vannamei dan nila (Oreochromis niloticus adalah komoditas unggulan yang layak dibudidaya di Kabupaten Pidie Jaya. Bandar Baru dan Tringgadeng merupakan kawasan yang layak untuk pengembangan komoditas udang windu sedangkan Jangka Buya dan Ulim layak untuk pengembangan komoditas udang vannamei. Analisis AHP menunjukkan komoditas udang windu menjadi prioritas utama untuk dikembangkan berdasarkan nilai ekonomi sedangkan udang vannamei menjadi prioritas utama berdasarkan keberlanjutan usaha. Analisis indikator keuangan budidaya kakap, kerapu, udang windu, vannamei dan nila menunjukkan usaha budidaya komoditas unggulan menghasilkan arus kas kumulatif dan NPV positif, nilai  IRR diatas 100%, rasio keuntungan

  20. ANALISIS PERILAKU SEKSUAL BERISIKO PADA REMAJA TERINFEKSI HIV DAN AIDS

    Directory of Open Access Journals (Sweden)

    Afritayeni Afritayeni

    2018-03-01

    penelitian eksplanatory research dengan pendekatan kuantitatif.Penelitian ini dilaksanakan dari bulan April-Oktober 2017.Jumlah sampel dalam penelitian ini adalah sebanyak 95 orang remaja yang terinfeksi HIV/ AIDS di Yayasan Sebaya Lancang Kuning dengan teknik pengambilan sampel accidental sampling. Pengumpulan data dilakukan dengan menggunakan data primer dan sekunder. Analisis data menggunakan analisis multivariat dengan uji regresi logistik berganda. Berdasarkan hasil penelitian dapat disimpulkan bahwa faktor yang paling dominan mempengaruhi perilaku seksual remaja adalah dorongan seksual.

  1. ANALISIS KEMAMPUAN KEUANGAN DAERAH PEMERINTAH PROPINSI NUSA TENGGARA BARAT

    Directory of Open Access Journals (Sweden)

    Hery Susanto

    2015-04-01

    Full Text Available This research aims to analyze the regional finance capability in West Nusa Tenggara province. This research uses secondary data of primary source. The data are obtained from the government of West Nusa Tenggara Province in the form of data that has been processed and published and become a legitimate document such as calculation data of APBD in Budgetary Year of 2003-2007. The instruments are used in collecting the data is the analysis of the regional finance capability through Calculation and Work Analysis of PAD, which is the measurement of share and growth, thus classified the result with mapping the financial region capability based on quadrant method. This research draws some conclusions namely: (1 generally, contribution of PAD (share to the total region income of NTB Province TA 2003- 2007 was low, in spite of the growth of PAD was high; (2 based on the measurement of Index Financial Capability (IKK, NTB Province was in the scale index of 0,541. Furthermore, the classification based on the criteria level of regional finance capability, the regional finance capability in NTB Province in 2003 -2007 was a province with high financial capability. There are some suggestions that could be offered to the Government of NTB Province; first, improving PAD share in NTB Province through the excavation of PAD potential sources. Second, concerning with the region cost efficiency, considering that the proportion of PAD achievement was fairly small comparing to the allocation of Region Cost. Penelitian ini bertujuan untuk menganalisis kemampuan keuangan daerah di Propinsi Nusa Tenggara Barat . Penelitian ini menggunakan data sekunder dari sumber utama. Data diperoleh dari pemerintah Propinsi Nusa Tenggara dalam bentuk data yang telah diolah dan dipublikasikan dan menjadi dokumen yang sah seperti data perhitungan APBD Tahun Anggaran 2003-2007. Instrumen yang digunakan dalam pengumpulan data adalah analisis kemampuan keuangan daerah melalui Perhitungan dan

  2. A catalog of special plane curves

    CERN Document Server

    Lawrence, J Dennis

    2014-01-01

    Among the largest, finest collections available-illustrated not only once for each curve, but also for various values of any parameters present. Covers general properties of curves and types of derived curves. Curves illustrated by a CalComp digital incremental plotter. 12 illustrations.

  3. Computation of undulator tuning curves

    International Nuclear Information System (INIS)

    Dejus, Roger J.

    1997-01-01

    Computer codes for fast computation of on-axis brilliance tuning curves and flux tuning curves have been developed. They are valid for an ideal device (regular planar device or a helical device) using the Bessel function formalism. The effects of the particle beam emittance and the beam energy spread on the spectrum are taken into account. The applicability of the codes and the importance of magnetic field errors of real insertion devices are addressed. The validity of the codes has been experimentally verified at the APS and observed discrepancies are in agreement with predicted reduction of intensities due to magnetic field errors. The codes are distributed as part of the graphical user interface XOP (X-ray OPtics utilities), which simplifies execution and viewing of the results

  4. Curved canals: Ancestral files revisited

    Directory of Open Access Journals (Sweden)

    Jain Nidhi

    2008-01-01

    Full Text Available The aim of this article is to provide an insight into different techniques of cleaning and shaping of curved root canals with hand instruments. Although a plethora of root canal instruments like ProFile, ProTaper, LightSpeed ® etc dominate the current scenario, the inexpensive conventional root canal hand files such as K-files and flexible files can be used to get optimum results when handled meticulously. Special emphasis has been put on the modifications in biomechanical canal preparation in a variety of curved canal cases. This article compiles a series of clinical cases of root canals with curvatures in the middle and apical third and with S-shaped curvatures that were successfully completed by employing only conventional root canal hand instruments.

  5. Invariance for Single Curved Manifold

    KAUST Repository

    Castro, Pedro Machado Manhaes de

    2012-01-01

    Recently, it has been shown that, for Lambert illumination model, solely scenes composed by developable objects with a very particular albedo distribution produce an (2D) image with isolines that are (almost) invariant to light direction change. In this work, we provide and investigate a more general framework, and we show that, in general, the requirement for such in variances is quite strong, and is related to the differential geometry of the objects. More precisely, it is proved that single curved manifolds, i.e., manifolds such that at each point there is at most one principal curvature direction, produce invariant is surfaces for a certain relevant family of energy functions. In the three-dimensional case, the associated energy function corresponds to the classical Lambert illumination model with albedo. This result is also extended for finite-dimensional scenes composed by single curved objects. © 2012 IEEE.

  6. Invariance for Single Curved Manifold

    KAUST Repository

    Castro, Pedro Machado Manhaes de

    2012-08-01

    Recently, it has been shown that, for Lambert illumination model, solely scenes composed by developable objects with a very particular albedo distribution produce an (2D) image with isolines that are (almost) invariant to light direction change. In this work, we provide and investigate a more general framework, and we show that, in general, the requirement for such in variances is quite strong, and is related to the differential geometry of the objects. More precisely, it is proved that single curved manifolds, i.e., manifolds such that at each point there is at most one principal curvature direction, produce invariant is surfaces for a certain relevant family of energy functions. In the three-dimensional case, the associated energy function corresponds to the classical Lambert illumination model with albedo. This result is also extended for finite-dimensional scenes composed by single curved objects. © 2012 IEEE.

  7. Analisis Reduksi Intensitas Cahaya Pada Smartphones’ Screen Protector Dan Dampaknya Pada Mata

    Directory of Open Access Journals (Sweden)

    Bhekti Kumorowati

    2017-04-01

    Full Text Available Analisis reduksi intensitas cahaya yang melewati screen protector dan identifikasi kemampuan screen protector sebagai pelindung mata dilakukan dengan mengukur reduksi intensitas cahaya menggunakan luxmeter, kemudian menetapkan fokus bahasan yang mencakup kemampuan cahaya menembus screen protector dan analisis fisis screen protector sebagai pelindung mata. Peran sebagai pelindung mata dikaji melalui pendekatan peristiwa polarisasi yaitu proses terserapnya sebagian arah getar cahaya. Dihasilkan sebagian arah getar cahaya layar smartphone sebelum masuk ke mata akan terserap oleh screen protector sehingga dapat memperlambat terjadinya degenerasi makula. Rekomendasi pemilihan screen protector bergantung pada besarnya koefisien atenuasi (koefisien penyerapan yang dimiliki masing-masing screen protector. Koefisien atenuasi terbesar dimiliki oleh screen protector jenis anti spy.

  8. Curved Folded Plate Timber Structures

    OpenAIRE

    Buri, Hans Ulrich; Stotz, Ivo; Weinand, Yves

    2011-01-01

    This work investigates the development of a Curved Origami Prototype made with timber panels. In the last fifteen years the timber industry has developed new, large size, timber panels. Composition and dimensions of these panels and the possibility of milling them with Computer Numerical Controlled machines shows great potential for folded plate structures. To generate the form of these structures we were inspired by Origami, the Japanese art of paper folding. Common paper tessellations are c...

  9. Analisis dan Desain BI-Dashboard Monitoring Realisasi Daftar Isian Pelaksanaan Anggaran (DIPA pada Kantor Pelayanan Perbendaharaan Negara (KPPN

    Directory of Open Access Journals (Sweden)

    Ernestina Rahmanasari

    2013-09-01

    Full Text Available Transaksi keuangan badan pemerintahan tingkat daerah dipertanggungjawabkan kepada Kementrian Keuangan melalui Kantor Pelayanan Perbendaharaan Negara (KPPNsetiap bulan dalam bentuk Laporan Keuangan Pemerintah Pusat (LKPP. Laporan Keuangan, didukung dengan teknologi Business Intelligence(BI dashboarddapat dimanfaatkan sebagai data-driven decision support system yang mendorong performa kinerja. Analisis dan desainterhadap pembuatan BI dashboard menunjukkanbagaimana Laporan Keuangan dapat digunakan untuk monitoring realisasi penyerapan dana DIPA dan kinerja instansi secara tepat waktu dan interaktif.Analisis terdiri dari analisis Indikator Kinerja Utama (IKU dan analisis Laporan Keuangan. IKUpada analisis dan desain ini mencakup ketercapaian estimasi dengan penerimaan, ketercapaian pagu dengan belanja, ketepatan waktu pengiriman rekonsiliasi oleh instansi, validasi, akurasi, dan ketepatan data. Desain terdiri dari katalog dashboard, alur analisis, sumber data, desain User-Interface, dan desain objek dashboard. Sedangkan dashboard yang dirancang menggunakan aplikasi Vera sebagai Enterprise System, mengakses basis data MySQL, dan menampilkan data dengan teknologi data-driven business-intelligence Qlikview. Desain aplikasi yang telah dibuat akan menampilkan 4 (empat Tab yaitu: Dashboard utama, Analisis, Monitoring, dan Laporan

  10. Projection-based curve clustering

    International Nuclear Information System (INIS)

    Auder, Benjamin; Fischer, Aurelie

    2012-01-01

    This paper focuses on unsupervised curve classification in the context of nuclear industry. At the Commissariat a l'Energie Atomique (CEA), Cadarache (France), the thermal-hydraulic computer code CATHARE is used to study the reliability of reactor vessels. The code inputs are physical parameters and the outputs are time evolution curves of a few other physical quantities. As the CATHARE code is quite complex and CPU time-consuming, it has to be approximated by a regression model. This regression process involves a clustering step. In the present paper, the CATHARE output curves are clustered using a k-means scheme, with a projection onto a lower dimensional space. We study the properties of the empirically optimal cluster centres found by the clustering method based on projections, compared with the 'true' ones. The choice of the projection basis is discussed, and an algorithm is implemented to select the best projection basis among a library of orthonormal bases. The approach is illustrated on a simulated example and then applied to the industrial problem. (authors)

  11. Growth curves for Laron syndrome.

    Science.gov (United States)

    Laron, Z; Lilos, P; Klinger, B

    1993-01-01

    Growth curves for children with Laron syndrome were constructed on the basis of repeated measurements made throughout infancy, childhood, and puberty in 24 (10 boys, 14 girls) of the 41 patients with this syndrome investigated in our clinic. Growth retardation was already noted at birth, the birth length ranging from 42 to 46 cm in the 12/20 available measurements. The postnatal growth curves deviated sharply from the normal from infancy on. Both sexes showed no clear pubertal spurt. Girls completed their growth between the age of 16-19 years to a final mean (SD) height of 119 (8.5) cm whereas the boys continued growing beyond the age of 20 years, achieving a final height of 124 (8.5) cm. At all ages the upper to lower body segment ratio was more than 2 SD above the normal mean. These growth curves constitute a model not only for primary, hereditary insulin-like growth factor-I (IGF-I) deficiency (Laron syndrome) but also for untreated secondary IGF-I deficiencies such as growth hormone gene deletion and idiopathic congenital isolated growth hormone deficiency. They should also be useful in the follow up of children with Laron syndrome treated with biosynthetic recombinant IGF-I. PMID:8333769

  12. Elementary particles in curved spaces

    International Nuclear Information System (INIS)

    Lazanu, I.

    2004-01-01

    The theories in particle physics are developed currently, in Minkowski space-time starting from the Poincare group. A physical theory in flat space can be seen as the limit of a more general physical theory in a curved space. At the present time, a theory of particles in curved space does not exist, and thus the only possibility is to extend the existent theories in these spaces. A formidable obstacle to the extension of physical models is the absence of groups of motion in more general Riemann spaces. A space of constant curvature has a group of motion that, although differs from that of a flat space, has the same number of parameters and could permit some generalisations. In this contribution we try to investigate some physical implications of the presumable existence of elementary particles in curved space. In de Sitter space (dS) the invariant rest mass is a combination of the Poincare rest mass and the generalised angular momentum of a particle and it permits to establish a correlation with the vacuum energy and with the cosmological constant. The consequences are significant because in an experiment the local structure of space-time departs from the Minkowski space and becomes a dS or AdS space-time. Discrete symmetry characteristics of the dS/AdS group suggest some arguments for the possible existence of the 'mirror matter'. (author)

  13. Perbandingan Penilaian Saham Dengan Metode Analisis Fundamental Dan Analisis Tehknical, Penggorengan Saham, Serta Keputusan Penilaian Saham Jika Hasil Berlawanan Arah Untuk Kedua Metode Analisis Pada Saham Bakrie Group Untuk Periode 2005- 2009

    OpenAIRE

    Harwaningrum, Miranti

    2016-01-01

    Beberapa tahun belakangan ini, dunia investasi mengalami peningkatan. Hal ini dapat terlihat dari data rata-rata perdagangan saham yang dimiliki oleh Bapepam. Salah satu jenis instrumen investasi yang sering diminati oleh investor adalah saham. Apabila dibandingkan dengan obligasi, saham memiliki expected return yang lebih tinggi. Namun, saham memiliki resiko yang lebih tinggi bila dibandingkan dengan obligasi. Untuk melakukan penilaian saham ada dua analisis yang dapat dilakukan, yaitu funda...

  14. ANALISIS ATRIBUT-ATRIBUT YANG MEMPENGARUHI TINGKAT KEPUASAN PELANGGAN TELEPON RUMAH (FIXED WIRELINE MENGGUNAKAN METODE ANALISIS DISKRIMINAN (STUDI KASUS DI PT. TELKOM KANDATEL SEMARANG

    Directory of Open Access Journals (Sweden)

    Diana Puspita Sari

    2012-02-01

    Full Text Available PT Telkom memiliki misi untuk memberikan layanan One Stop Infocom dengan kualitas prima dan harga kompetitif. Kenyataannya, PT. Telkom Kandatel Semarang mengalami penurunan pendapatan. Semakin berkembangnya layanan jasa fixed wireless yang lebih mudah dan murah, menyebabkan penurunan pemakaian jasa fixed wireline. Dengan konsumen melakukan pembelian pertama pada suatu produk tertentu dengan harga terjangkau, kualitas terjamin, maka konsumen akan kembali membeli produk tersebut, dan dampaknya dari fenomena ini adalah kepuasan pelanggan (customer satisfaction terhadap produk tertentu karena telah memberikan kepuasan dan terjaminnya kualitas, walaupun banyak pesaing lain.  Oleh sebab itu, penelitian ini membahas dan melakukan analisis kepuasan pelanggan fixed wireline PT. Telkom Kandatel Semarang, menggunakan variabel kepuasan pelanggan untuk dikelompokkan menjadi tiga tingkatan yaitu pelanggan yang sangat puas, puas, dan tidak puas dengan menggunakan analisis klaster, kemudian dilakukan analisis variabel 4P Customer Relationship Management (CRM menggunakan analisis diskriminan, sehingga diketahui atribut yang mempengaruhi tingkat kepuasan pelanggan agar PT. Telkom Kandatel Semarang dapat terus mempertahankan dan meningkatkan kepuasan pelanggan dengan berusaha memenuhi kebutuhan dan keinginan pelanggan dengan maksud kepuasan pelanggan tidak menurun agar dapat meningkatkan intensitas pemakaian fixed wireline. Kata kunci : analisis klaster, analisis diskriminan, kepuasan pelanggan, fixed wireline      PT Telkom has a mission to provide a One Stop Infocom services with excellent quality and competitive price. In fact, PT. Telkom Semarang Kandatel income decreased. The growing fixed wireless service is easier and cheaper, causes a decrease in the use of fixed wireline services.With the first consumer purchase a given product at an affordable price, guaranteed quality, then consumers will buy the product again, and the impact of this phenomenon is

  15. Dual Smarandache Curves and Smarandache Ruled Surfaces

    OpenAIRE

    Tanju KAHRAMAN; Mehmet ÖNDER; H. Hüseyin UGURLU

    2013-01-01

    In this paper, by considering dual geodesic trihedron (dual Darboux frame) we define dual Smarandache curves lying fully on dual unit sphere S^2 and corresponding to ruled surfaces. We obtain the relationships between the elements of curvature of dual spherical curve (ruled surface) x(s) and its dual Smarandache curve (Smarandache ruled surface) x1(s) and we give an example for dual Smarandache curves of a dual spherical curve.

  16. Analisis Vegetasi di Hutan Mbeji Daerah Wonosalam Jombang

    Directory of Open Access Journals (Sweden)

    Anita Munawwaroh

    2016-03-01

    Full Text Available Analisis vegetasi terhadap hutan perlu dilakukan untuk mengetahui keanekaragaman hayati yang terdapat di hutan tersebut sehingga mempermudah didalam melakukan pemeliharaan dan pemberdayaan hutan.Tujuan dari penelitian ini adalah untuk mengetahui keanekaragaman hayati dan struktur vegetasi (frekuensi, kerapatan, dominansi, dan Indeks Nilai Penting di hutan mbeji, Wonossalam, Jombang. Pada penelitian ini digunakan metode point centered quarter. Pennelitian dilakukan pada bulan Mei 2015. Hasil penelitian menujukkan padaHutan Mbeji terdapat 11 jenis pohon yang teridentifikasi dan 15 spesies tumbuhan, dimana ada 10 spesies yang telah teridentifikasiNilai penting  tumbuh-tumbuhan di Hutan Mbeji di daerah Wonosalam Jombang  pada tingkat pohon paling tinggi adalah pohon randu (Ceiba petandra  sebesar 57,42 % sedangkan nilai INP paling rendah dari jenis pohon andong (Rhadamnia cinerea yaitu sebesar 6,06 %. Pada sapling nilai penting yang paling tinggi adalah talas (Colocasia esculenta yaitu sebesar 49,23 %. Sedangkan, nilai INP paling rendah dari jenis nanas (Ananas comosus, nangka (Artocarpus heterophyllus, tapak liman (Elephantopus scaber, semak A, semak B, semak C, semak E, dan semak F yaitu sebesar 6,35 %. Tingginya nilai INP menunjukkan bahwa jenis-jenis tersebut dapat menyesuaikan diri dengan lingkungan sekitarnya yang lebih baik dibanding jenis lainnya.

  17. ANALISIS MODEL PENERIMAAN PENGGUNA SISTEM PELAPORAN PAJAK ONLINE

    Directory of Open Access Journals (Sweden)

    Muhammad Malik Hakim

    2016-04-01

    Full Text Available Direktorat Jenderal Pajak saat ini telah menerapkan e-SPT dan e-Filing sebagai sarana digitalisasi dan otomasi pelaporan pajak. Untuk meningkatkan transformasi bisnis proses dalam sistem pelayanan perpajakan dari sistem manual ke digital, diperlukan kesiapan dan penerimaan pengguna yang cukup memadai. Studi dan analisis perlu dilakukan untuk mengetahui sejauh mana tingkat penerimaan pengguna dalam menggunakan sistem e-SPT dan e- Filing. Studi dilakukan secara kuantitatif menggunakan model UTAUT yang telah dimodifikasi untuk menganalisis model penerimaan pengguna yang merupakan Wajib Pajak Orang Pribadi yang telah menggunakan e-SPT dan e- Filing. Jumlah responden dalam penelitian ini sejumlah 235 responden yang disebarkan dengan cara snow ball sampling. Hasil penelitian menunjukkan perbedaan model penerimaan e-SPT dan e-Filing dari jenis kelamin dan kelompok umur. Pengaruh harapan kinerja (PE dan pengaruh sosial (SI terhadap niat perilaku (BI, serta pengaruh niat perilaku (BI pada penggunaan aktual (AU pada pria lebih kuat dibandingkan pada wanita. Sebaliknya, pengaruh harapan usaha (EE terhadap niat perilaku (BI dan fasilitas pendukung / penunjang (FC terhadap penggunaan aktual (AU pada wanita dijumpai memberikan pengaruh yang lebih kuat. Selain itu, di dalam kelompok umur, pengaruh terhadap semua variabel yang diteliti ternyata lebih kuat pada kelompok umur 25 35 tahun. Kata kunci: model penerimaan pengguna, UTAUT, pelaporan pajak, e-SPT, e-filing.

  18. ANALISIS TINGKAT PENDAPATAN PEDAGANG CANANG DI PASAR BADUNG

    Directory of Open Access Journals (Sweden)

    Surya Dewi Rustariyuni

    2015-12-01

    Full Text Available This studyanalyzes thecharacteristic of “canang”sellers, their economicactivities, their revenues, the factors which influencethem to chooseBadung Market for selling their products and theircontributions in their household economy. As a matter of fact,all of Hindu ismpeoplein Bali use canang everyday for conductingall ceremonies, but only few people whomake canang. It has occured foryears. The method used for analizing the data isdescriptive analysis. The result shows thatthe canang sellersare mostlyfrom Bali. They are dominated by married women atthe age of 15 up to 35 years old. Then, theireducational backgroundaresenior high schools. They start selling early in the morning and stop their activities in the evening.Finally, usually the sellers get much money when there is a big ceremony.Penelitian ini menganalisis karakteristik penjual "canang", kegiatan ekonominya, pendapatannya, faktor-faktor yang mempengaruhi penjual canang untuk memilih Pasar Badung sebagai tempat untuk menjual canangnya dan kontribusi penjual canang dalam perekonomian rumah tangga. Sebenarnya, semua orang Hindu di Bali menggunakan canang setiap hari untuk melakukan semua upacara, tetapi hanya sedikit orang yang membuat canang. Ini telah terjadi selama bertahun-tahun. Metode yang digunakan untuk menganalisis data disini adalah analisis deskriptif. Hasil penelitian menunjukkan bahwa para penjual canang sebagian besar dari Bali. Mereka didominasi oleh perempuan yang sudah menikah danusianya antara 15 hingga 35 tahun. Kemudian, latar belakang pendidikan mereka adalah sekolah menengah atas. Mereka mulai menjual canang di pagi hari dan selesai di malam hari. Biasanya para penjual mendapatkan uang banyak ketika ada upacara besar.

  19. Analisis Cost-Volume-Profit Kaitannya dengan Perencanaan Laba

    Directory of Open Access Journals (Sweden)

    Rian Andriani

    2018-01-01

    Full Text Available Tujuan penelitian  ini adalah untuk menganalisis cost, volume, profit Break Event Point dan Margin Of Safety L.A English Course Baleendah Bandung pada kuartal I – IV. Metode penelitian yang digunakan adalah metode penelitian kuntitatif deskriptif. Teknik pengumpulan data menggunakan studi pustaka, observasi, wawancara, dan dokumentasi yang memiliki hubungan dengan pokok permasalahan. Teknik analisis data yang digunakan metode regresi kuadrat terkecil, break event point dan margin of safety.  Hasil menunjukan, biaya tertinggi terdapat pada kuartal I, volume penjualan  tertinggi terdapat pada kuartal I, laba tertinggi terdapat pada kuartal I, Break Event Point tertinggi terdapat pada kuartal I. Sedangkan Margin of safety (% tertinggi pada kuartal IV yaitu 91.9%. Masalah yang timbul dalam  perencanaan  laba yaitu pertama  pendapatan L.A English Course  naik turun  dalam satu  tahunnya, kedua  kurangnya promosi untuk beberapa program kecuali program regular. Upaya dalam mengatasi masalah yang timbul di L.A English Course yaitu pertama memberikan gratis biaya daftar, dan memberi voucher untuk siswa L.A yang memasukan siswa baru., kedua membagikan brosur, dan menawarkan program L.A. dengan melakukan follow up semua nomor telepon tamu yang pernah berkunjung.

  20. ANALISIS PENGARUH PERUBAHAN EARNINGS DAN RISIKO PASAR TERHADAP STRUKTUR MODAL

    Directory of Open Access Journals (Sweden)

    Endi Sarwoko

    2006-05-01

    Full Text Available Penelitian ini bertujuan untuk menguji perbedaan rata-rata struktur modal antar industri, menguji pengaruh perubahan earnings perusahaan terhadap struktur modal, dan menguji pengaruh risiko pasar dengan struktur modal perusahaan. Struktur modal dalam penelitian ini diproksikan dengan debt to equity ratio dan debt to total assets. Data diperoleh dari Pojok Bursa Efek Jakarta (BEJ Universitas Brawijaya, sampel sebanyak 40 perusahaan yang diambil secara Purposive dengan kriteria perusahaan-perusahaan tersebut aktif mencatatkan laporan keuangannya di BEJ dan aktif melakukan perdagangan saham selama 6 tahun terakhir. Hasil analisis menunjukkan bahwa terdapat pengaruh terbalik antara perubahan earnings perusahaan terhadap D/E tetapi perubahan earnings ternyata tidak berpengaruh signifikan terhadap D/A. Risiko pasar tidak berpengaruh signifikan terhadap debt to equity, hasil ini menunjukkan bahwa ketika akan melakukan pembelian saham investor tidak mempertimbangkan risiko pasar. Sedangkan berdasarkan pengaruh terhadap D/A diperoleh hasil risiko pasar berpengaruh signifikan terhadap debt to total assets,  manajemen perusahaan sangat memperhatikan dampak risiko pasar dalam menentukan kebijakan struktur modal perusahaan, karena dalam memberikan pinjaman kreditur biasanya sangat mempertimbangkan aset yang dimiliki perusahaan didanai dari mana, hutang atau modal sendiri.

  1. Analisis ergonomi postur kerja operator pada proses pembuatan batako

    Directory of Open Access Journals (Sweden)

    Regina Anggraini

    2017-03-01

    Full Text Available Abstrak: Proses pembuatan batako merupakan salah satu pekerjaan yang membutuhkan penanganan material secara manual,sehingga tenaga fisik pekerja diperlukan meskipun mesin bantu cetak sudah tersedia. Berdasarkan pengamatan dilapangandiketahui bahwa seluruh aktivitas pembuatan batako banyak membutuhkan tenaga fisik. Pekerjaan membuat batako dapatdibagi menjadi beberapa elemen kerja dan setiap elemen kerja memberikan postur kerja yang bervariasi. Hasil analisis posturkerja dengan menggunakan REBA menunjukkan pekerja pada proses pemindahan batako basah memiliki nilai 11 dengan levelrisiko sangat tinggi. Perbaikan dilakukan dengan menambahkan kursi pekerja dan berhasil menurunkan skor REBA menjadi 5.Kata Kunci: Postur kerja, REBA Abstract: Brick-making process is one of those jobs that require manual materials handling, so that the physical exertion of workersneeded though a production machine is already available. Based on observations in the field note that the entire activity ofbrick-making requires a lot of physical exertion. Brick-making can be divided into several working elements and each element ofthe work provides a varied work posture. The results of the analysis work posture using REBA showed workers in the processof moving the wet concrete blocks have a value of 11 with a very high risk level. Improvement of working conditions by adding aseat for workers reduce the REBA score to 5 .Keywords: Work Posture , REBA

  2. ANALISIS PENGARUH TINGKAT KESEHATAN BANK TERHADAP RETURN ON ASSET

    Directory of Open Access Journals (Sweden)

    Andy Setiawan

    2017-10-01

    Full Text Available Penelitian  ini  dilakukan  untuk  menganalisis pengaruh  tingkat kesehatan bank terhadap return on asset (ROA berdasarkan metode risk based bank rating (RBBR. Variabel independen yang diteliti adalah Non  Performing  Loan  (NPL, Loan to Deposit Ratio (LDR, Net Interest Margin (NIM, Capital Adequacy Ratio (CAR,  BOPO   (Biaya   Operasional/Pendapatan Operasional, Good Corporate Governance (GCG dan Posisi  Devisa  Netto  (PDN terhadap variabel dependen Return On Asset (ROA. Sampel yang digunakan  adalah  seluruh bank BUKU 4 di Indonesia selama periode 2007-2014. Teknik analisis data yang  digunakan  adalah  regresi  linier  berganda. Hasil penelitian ini menunjukkan bahwa tingkat kesehatan bank dengan metode RBBR berpengaruh signifikan secara bersama terhadap ROA. Secara parsial LDR, NIM, BOPO, dan PDN berpengaruh signifikan terhadap ROA. Sedangkan variabel NPL, GCG dan CAR tidak berpengaruh signifikan. Kemampuan prediksi dari ketujuh variabel  tersebut  terhadap  ROA  dalam  penelitian  ini  sebesar  93,7%,  sedangkan sisanya 6,3% dipengarui oleh faktor lain yang tidak dimasukkan ke dalam model penelitian.

  3. ANALISIS KADAR SIKLAMAT PADA ES KRIM DI KOTA BANJARBARU

    Directory of Open Access Journals (Sweden)

    Nurlailah Nurlailah

    2017-07-01

    Full Text Available Pemanis merupakan salah satu komponen yang sering ditambahkan dalam bahan makanan. Pemanis buatan yang banyak beredar di masyarakat adalah siklamat. Konsumsi siklamat yang melebihi dosis akan mengakibatkan kanker kandung kemih. Selain itu akan menyebabkan tumor paru, hati, dan limfa. Tujuan penelitian ini adalah untuk mengetahui adanya siklamat dalam es krim yang melebihi ambang batas yang dipersyaratkan. Jenis penelitian ini adalah survey deskriptif. Sampel penelitian adalah es krim produksi rumah tangga dari seluruh pedagang es krim di Banjarbaru utara yaitu dengan jumlah 11 pedagang es krim. Variabel dalam penelitian ini adalah kadar siklamat yang terdapat dalam es krim. Hasil penelitian menunjukkan dari 11 sampel es krim yang diperiksa, 9 sampel mengandung siklamat dengan kadar tertinggi 7,37 g/kg sebagai asam siklamat. Kesimpulan penelitian ini adalah es krim yang mengandung siklamat ditemukan sebanyak 82% (9 sampel, sedangkan 18% (2 sampel lainnya negatif, dari 9 sampel yang positif mengandung siklamat, 89% tidak memenuhi syarat PERMENKES Nomor 208 tahun 1985 yaitu melebihi 2 gr/kg sebagai asam siklamat. Perlu dilakukan pemeriksaan yang lebih spesifik untuk analisis kadar siklamat dengan metode lain seperti Kromatografi Cair Kinerja Tinggi (KCKT

  4. ANALISIS OMNICHANNEL CUSTOMER EXPERIENCE MATURITY DI PT. TELEKOMUNIKASI INDONESIA

    Directory of Open Access Journals (Sweden)

    Andreas W. Yanuardi

    2017-02-01

    Full Text Available Customer Experience yang baik mampu meningkatkan kepuasan pelanggan, sehingga membuat pelanggan menjadi setia terhadap penyedia jasa. Pentingnya Customer Experience ini membuat banyak perusahaan ber fokus dalam membangun strategi Customer Experience - nya. Salah satu strategi C ustomer Experience untuk meningkatkan kepuasan pelanggan adalah dengan Omnichannel Customer Experience . Prinsip Omnichannel adalah melakukan integrasi data di semua saluran komunikasi pelanggan sehingga perusahaan mendapatkan pandangan 360 o terhadap pelang gan, atau disebut “ single customer view ”. Integrasi data memungkinkan pelanggan melakukan interaksi dengan perusahaan melalui saluran manapun yang diinginkannya, tanpa harus mengulang informasi ketika ia berpindah saluran. Single customer view kemudian mem ungkinkan perusahaan melakukan personalisasi, yaitu memberikan pelayanan kepada pelanggan secara personal sesuai profil, aktivitas, perilaku, dan ketertarikan pelanggan tersebut. PT Telekomunikasi Indonesia Tbk , sebagai salah satu Communication Service Provider (CSP , telah mengimplementasikan strategi Omnichannel . Penelitian ini bertujuan mengukur maturity level dari implementasi Omnichannel Customer Experience PT Telekomunikasi Indonesia Tbk berdasarkan aspek - aspek dalam Omnichannel Maturity Model , men ggunakan metode expert judgment. Hasil analisis menunjukkan bahwa Telkom telah melakukan inisiasi implementasi Omnichannel Customer Experience dengan diterapkannya platform single window yang terintegrasi di semua saluran pelanggan dan dari sembilan dimensi p engukuran Omnichannel Maturity Model mayoritas sudah berada pada level Cross Channel .

  5. Analisis Kesulitan Belajar Mahasiswa Dalam Memahami Konsep Bilangan Real

    Directory of Open Access Journals (Sweden)

    Lalu Sucipto

    2017-02-01

    Full Text Available [Bahasa]: Penelitian ini bertujuan untuk mengetahui jenis-jenis kesulitan dan faktor-faktor penyebab kesulitan yang dihadapi oleh mahasiswa dalam mengerjakan soal bilangan real. Penelitian ini merupakan penelitian kualitatif dengan menggunakan analisis deskriptif. Data dikumpulkan melalui observasi, tes dan wawancara. Hasil tes dikelompokkan berdasarkan tujuh kategori kesalahan Watson kemudian dilakukan wawancara untuk mengklarifikasi kesalahan tersebut.Hasil penelitian ini menunjukkan bahwa jenis kesalahan yang dominan terjadi pada jawaban mahasiswa berupa jenis kesalahan data tidak tepat, prosedur yang tidak tepat, konflik level respon, dan masalah hirarkhi keterampilan. Kesalahan mahasiswa dalam mengerjakan soal memberikan gambaran kesulitan yang dialami dalam memahami konsep bilangan real. Faktor yang mempengaruhi kesulitan mahasiswa yaitu: materi yang sulit dipahami dan diaplikasikan dalam pemecahan masalah; dan faktor pribadi yang mencakup pola belajar yang tidak baik, sarana pendukung, dan faktor dosen. [English]: This research aims to identify undergraduate students’ difficulties and the factors which caused them in solving real analysis problems. This qualitative research applies descriptive analysis. Data is collected through observation, test, and interview. Students’ answers on test are categorized into Watson’s seven categories of errors then the students are interviewed to clarify the errors. This research reveals that dominant errors encounterd by the students are inappropriate data, inappropriate procedure, response level conclict, and skill hierarchy problem. The errors portrait the difficulties the students encountered. The factors which cause the difficulties are the material is hard to understand and apply to problem solving; and personal factor such as bad learning habits, supporting tools, and the lecturers.

  6. A note on families of fragility curves

    International Nuclear Information System (INIS)

    Kaplan, S.; Bier, V.M.; Bley, D.C.

    1989-01-01

    In the quantitative assessment of seismic risk, uncertainty in the fragility of a structural component is usually expressed by putting forth a family of fragility curves, with probability serving as the parameter of the family. Commonly, a lognormal shape is used both for the individual curves and for the expression of uncertainty over the family. A so-called composite single curve can also be drawn and used for purposes of approximation. This composite curve is often regarded as equivalent to the mean curve of the family. The equality seems intuitively reasonable, but according to the authors has never been proven. The paper presented proves this equivalence hypothesis mathematically. Moreover, the authors show that this equivalence hypothesis between fragility curves is itself equivalent to an identity property of the standard normal probability curve. Thus, in the course of proving the fragility curve hypothesis, the authors have also proved a rather obscure, but interesting and perhaps previously unrecognized, property of the standard normal curve

  7. Observable Zitterbewegung in curved spacetimes

    Science.gov (United States)

    Kobakhidze, Archil; Manning, Adrian; Tureanu, Anca

    2016-06-01

    Zitterbewegung, as it was originally described by Schrödinger, is an unphysical, non-observable effect. We verify whether the effect can be observed in non-inertial reference frames/curved spacetimes, where the ambiguity in defining particle states results in a mixing of positive and negative frequency modes. We explicitly demonstrate that such a mixing is in fact necessary to obtain the correct classical value for a particle's velocity in a uniformly accelerated reference frame, whereas in cosmological spacetime a particle does indeed exhibit Zitterbewegung.

  8. Observable Zitterbewegung in curved spacetimes

    Energy Technology Data Exchange (ETDEWEB)

    Kobakhidze, Archil, E-mail: archilk@physics.usyd.edu.au [ARC Centre of Excellence for Particle Physics at the Terascale, School of Physics, The University of Sydney, NSW 2006 (Australia); Manning, Adrian, E-mail: a.manning@physics.usyd.edu.au [ARC Centre of Excellence for Particle Physics at the Terascale, School of Physics, The University of Sydney, NSW 2006 (Australia); Tureanu, Anca, E-mail: anca.tureanu@helsinki.fi [Department of Physics, University of Helsinki, P.O. Box 64, 00014 Helsinki (Finland)

    2016-06-10

    Zitterbewegung, as it was originally described by Schrödinger, is an unphysical, non-observable effect. We verify whether the effect can be observed in non-inertial reference frames/curved spacetimes, where the ambiguity in defining particle states results in a mixing of positive and negative frequency modes. We explicitly demonstrate that such a mixing is in fact necessary to obtain the correct classical value for a particle's velocity in a uniformly accelerated reference frame, whereas in cosmological spacetime a particle does indeed exhibit Zitterbewegung.

  9. Differential geometry curves, surfaces, manifolds

    CERN Document Server

    Kohnel, Wolfgang

    2002-01-01

    This carefully written book is an introduction to the beautiful ideas and results of differential geometry. The first half covers the geometry of curves and surfaces, which provide much of the motivation and intuition for the general theory. Special topics that are explored include Frenet frames, ruled surfaces, minimal surfaces and the Gauss-Bonnet theorem. The second part is an introduction to the geometry of general manifolds, with particular emphasis on connections and curvature. The final two chapters are insightful examinations of the special cases of spaces of constant curvature and Einstein manifolds. The text is illustrated with many figures and examples. The prerequisites are undergraduate analysis and linear algebra.

  10. LINS Curve in Romanian Economy

    Directory of Open Access Journals (Sweden)

    Emilian Dobrescu

    2016-02-01

    Full Text Available The paper presents theoretical considerations and empirical evidence to test the validity of the Laffer in Narrower Sense (LINS curve as a parabola with a maximum. Attention is focused on the so-called legal-effective tax gap (letg. The econometric application is based on statistical data (1990-2013 for Romania as an emerging European economy. Three cointegrating regressions (fully modified least squares, canonical cointegrating regression and dynamic least squares and three algorithms, which are based on instrumental variables (two-stage least squares, generalized method of moments, and limited information maximum likelihood, are involved.

  11. Analisis Zona Permeabel Fluida Sistem Panas Bumi Gunungapi Slamet Berdasarkan Analisis Kerapatan Kelurusan Citra SRTM Dan Struktur Geologi

    Directory of Open Access Journals (Sweden)

    Sachrul Iswahyudi

    2016-03-01

    Full Text Available Keberadaan manifestasi panasbumi di sekitar Gunungapi Slamet tidak dapat dipisahkan dari zona-zona permeabilitas yang berkembang. Lokasi-lokasi lulus air tersebut (zona permeabel yang memungkinkan terbentuknya sirkulasi fluida tempat air masuk untuk mengisi reservoir panas bumi dan air keluar ke permukaan bumi sebagai manifesatasi mata air panasbumi di sekitar Gunungapi Slamet. Publikasi yang berupa hasil penelitian ini mencoba mengidentifikasi zona-zona permeabel tersebut berdasarkan anaslisis kerapatan kelurusan yang terekam dalam citra SRTM. Identifikasi kelurusan-kelurusan pada citra berdasarkan komponen-komponen interpretasi citra, yaitu tona, tekstur, pola, bentuk dan relief. Hasil analisis tersebut dikompilasi dengan data struktur geologi regional yang sebelumnya telah diidentifikasi dan data lapangan berupa manifestasi mata air panas. Lokasi-lokasi dengan kerapatan kelurusan yang tinggi pada citra SRTM umumnya bersesuaian dengan zona struktur geologi regional keberadaan manifestasi mata air panas. Daerah tersebut memanjang relatif utara-selatan di bagian barat dan timur-barat di bagian selatan peta. Daerah-daerah inilah yang merupakan daerah lulus air tempat fluida bersirkulasi membentuk sistem panasbumi Gunungapi Slamet.

  12. Differential geometry and topology of curves

    CERN Document Server

    Animov, Yu

    2001-01-01

    Differential geometry is an actively developing area of modern mathematics. This volume presents a classical approach to the general topics of the geometry of curves, including the theory of curves in n-dimensional Euclidean space. The author investigates problems for special classes of curves and gives the working method used to obtain the conditions for closed polygonal curves. The proof of the Bakel-Werner theorem in conditions of boundedness for curves with periodic curvature and torsion is also presented. This volume also highlights the contributions made by great geometers. past and present, to differential geometry and the topology of curves.

  13. Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung Di Kota Bengkulu

    Directory of Open Access Journals (Sweden)

    Jaka A. I. Paski

    2018-01-01

    Citation: Paski, J.A.I., Faski, G.I.S.L., Handoyo, M.F. dan Pertiwi, D.A.S. (2017. Analisis Neraca Air Lahan untuk Tanaman Padi dan Jagung di Kota Bengkulu. Jurnal Ilmu Lingkungan, 15(2, 83-89, doi:10.14710/jil.15.2.83-89

  14. ANALISIS RASIO ALTMAN MODIFIKASI PADA PREDIKSI KEBANGKRUTAN PERUSAHAAN PROPERTY DAN REAL ESTATE YANG TERDAFTAR DI BEI

    OpenAIRE

    Anita Tri Widiyawati; Supri Wahyudi Utomo; Nik Amah

    2015-01-01

    Penelitian ini bertujuan untuk mengetahui pengaruh rasio Altman Modifikasi terhadap prediksi kebangkrutan. Jenis penelitian ini termasuk penelitian kuantitatif. Populasi dalam penelitian ini adalah perusahaan property dan real estate yang terdaftar di BEI. Teknik pengambilan sampel menggunakan purposive sampling sehingga diperoleh sampel sejumlah 32 perusahaan property dan real estate yang menerbitkan laporan keuangannya selama tahun 2011-2013. Teknik analisis data menggunakan regresi logisti...

  15. Analisis Perbandingan Material Slab Beton Pada Perkerasan Apron Dengan Menggunakan Program Bantu Elemen Hingga

    Directory of Open Access Journals (Sweden)

    Hendrawan Setyo Warsito

    2016-04-01

    Full Text Available Kekuatan slab beton sangat dipengaruhi oleh jenis material yang dipakai. Jenis material yang dimaksud adalah material beton dengan menggunakan PC (Portland Cement dan penggunaan geopolimer dalam komposisi campuran slab beton. Beton geopolimer merupakan beton yang ramah lingkungan. Permasalahan lain yang timbul adalah letak roda pesawat tidak selalu berada pada titik yang sama disuatu permukaan slab beton apron. Pada tugas akhir ini dimaksudkan untuk menganalisis suatu slab beton yang dibebani roda pesawat dengan campuran variasi material beton dan variasi letak roda pesawat pada slab beton dengan program bantu metode elemen hingga. Dengan data pergerakan pesawat, spesifikasi apron bandara Juanda kondisi eksisting. Dilakukan perhitungan tebal slab beton menggunakan software FAARFIELD dan diperoleh tebal slab beton sebesar 442,5 mm. Dari analisis program bantu elemen hingga dapat diperoleh tegangan pada slab beton yang ditimbulkan oleh pembebanan roda pesawat. Hasil validasi dari analisis tegangan menggunakan program bantu elemen hingga dengan analisis Westergaard yaitu memiliki nilai tegangan yang hampir sama pada ketebalan slab beton 450mm. Nilai tegangan tiap-tiap material beton menunjukan nilai tebal slab beton yang diijinkan untuk tipe pesawat tertentu. Dari analisis menggunakan program bantu elemen hingga tebal slab beton yang diijinkan untuk material slab beton PC yaitu sebesar 425mm. Sedangkan untuk material beton geopolimer yaitu sebesar  415 mm.

  16. Analisis Faktor Pembentuk Ekuitas Merek Toyota dan Daihatsu di Indonesia (Studi Komparasi pada Masyarakat Bandung)

    OpenAIRE

    Sigiro, Cristine Afriani; Rachma Putri, Yuliani; Ilfandy Imran, Ayub

    2016-01-01

    Toyota dan Daihatsu merupakan dua merek otomotif (mobil) yang sangat fenomenal di kalangan masyarakat Indonesia. Produk dari kedua merek tersebut memiliki persamaan yang identik, namun Toyota memasarkan produknya lebih mahal dibandingkan Daihatsu. Tujuan penelitian ini untuk mengetahui perbandingan ekuitas merek Toyota dan Daihatsu menurut masyarakat Bandung. Penelitian ini menggunakan paradigma penelitian positivistik dengan metode penelitian studi komparatif melalui teknik analisis data yan...

  17. ANALISIS PENGARUH CUSTOMER RELATIONSHIP MANAGEMENT TERHADAP KEPUASAN PELANGGAN PADA PT TELKOMSEL DI MAKASSAR

    OpenAIRE

    ANANDA, RACHMA RESKY

    2015-01-01

    2015 Analisis Pengaruh Customer Relationship Management Terhadap Kepuasan Pelanggan Pada PT Telkomsel di Makassar Analysis of Customer Relationship Management Influence to Customer Satisfaction at PT Telkomsel in Makassar Rachma Resky Ananda Muh. Asdar Yansor Djaya Tujuan dari penelitian ini adalah untuk menganalisis pengaruh Customer Relationship (continuity marketing, one to one marketing dan partnering atau co-marketing) terhadap k...

  18. Flow characteristics of curved ducts

    Directory of Open Access Journals (Sweden)

    Rudolf P.

    2007-10-01

    Full Text Available Curved channels are very often present in real hydraulic systems, e.g. curved diffusers of hydraulic turbines, S-shaped bulb turbines, fittings, etc. Curvature brings change of velocity profile, generation of vortices and production of hydraulic losses. Flow simulation using CFD techniques were performed to understand these phenomena. Cases ranging from single elbow to coupled elbows in shapes of U, S and spatial right angle position with circular cross-section were modeled for Re = 60000. Spatial development of the flow was studied and consequently it was deduced that minor losses are connected with the transformation of pressure energy into kinetic energy and vice versa. This transformation is a dissipative process and is reflected in the amount of the energy irreversibly lost. Least loss coefficient is connected with flow in U-shape elbows, biggest one with flow in Sshape elbows. Finally, the extent of the flow domain influenced by presence of curvature was examined. This isimportant for proper placement of mano- and flowmeters during experimental tests. Simulations were verified with experimental results presented in literature.

  19. Improved capacitive melting curve measurements

    International Nuclear Information System (INIS)

    Sebedash, Alexander; Tuoriniemi, Juha; Pentti, Elias; Salmela, Anssi

    2009-01-01

    Sensitivity of the capacitive method for determining the melting pressure of helium can be enhanced by loading the empty side of the capacitor with helium at a pressure nearly equal to that desired to be measured and by using a relatively thin and flexible membrane in between. This way one can achieve a nanobar resolution at the level of 30 bar, which is two orders of magnitude better than that of the best gauges with vacuum reference. This extends the applicability of melting curve thermometry to lower temperatures and would allow detecting tiny anomalies in the melting pressure, which must be associated with any phenomena contributing to the entropy of the liquid or solid phases. We demonstrated this principle in measurements of the crystallization pressure of isotopic helium mixtures at millikelvin temperatures by using partly solid pure 4 He as the reference substance providing the best possible universal reference pressure. The achieved sensitivity was good enough for melting curve thermometry on mixtures down to 100 μK. Similar system can be used on pure isotopes by virtue of a blocked capillary giving a stable reference condition with liquid slightly below the melting pressure in the reference volume. This was tested with pure 4 He at temperatures 0.08-0.3 K. To avoid spurious heating effects, one must carefully choose and arrange any dielectric materials close to the active capacitor. We observed some 100 pW loading at moderate excitation voltages.

  20. Classical optics and curved spaces

    International Nuclear Information System (INIS)

    Bailyn, M.; Ragusa, S.

    1976-01-01

    In the eikonal approximation of classical optics, the unit polarization 3-vector of light satisfies an equation that depends only on the index, n, of refraction. It is known that if the original 3-space line element is d sigma 2 , then this polarization direction propagates parallely in the fictitious space n 2 d sigma 2 . Since the equation depends only on n, it is possible to invent a fictitious curved 4-space in which the light performs a null geodesic, and the polarization 3-vector behaves as the 'shadow' of a parallely propagated 4-vector. The inverse, namely, the reduction of Maxwell's equation, on a curve 'dielectric free) space, to a classical space with dielectric constant n=(-g 00 ) -1 / 2 is well known, but in the latter the dielectric constant epsilon and permeability μ must also equal (-g 00 ) -1 / 2 . The rotation of polarization as light bends around the sun by utilizing the reduction to the classical space, is calculated. This (non-) rotation may then be interpreted as parallel transport in the 3-space n 2 d sigma 2 [pt

  1. Analysis of conjugated heat transfer, in transient state of the first stage of a gas turbine; Analisis de transferencia de calor conjugada, en estado transitorio, de la primera etapa de una turbina de gas

    Energy Technology Data Exchange (ETDEWEB)

    Campos Amezcua, Alfonso; Mazur C, Zdzislaw [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Gallegos Munoz, Armando [Facultad de Ingenieria Mecanica, Electrica y Electronica (FIMEE), Universidad de Guanajuato, Guanajuato (Mexico)

    2007-11-15

    This article presents an analysis of conjugated heat transfer in the first stage of movable blades during the starting of a gas turbine, covering a period of 1,012 seconds. The developed computer model is in 3D and uses as initial and border conditions typical starting curves for stack gases, the cooling air and the angular velocity of the blades. As a result of the numerical predictions, the temperature distributions in stack gases, the trowel of the blade and the cooling air are included, doing emphasis in the results obtained in the solid (body of the blade), since these are used for thermo-mechanical stress analysis and later estimation of the blade residual life. [Spanish] Este articulo presenta un analisis de transferencia de calor conjugada en la primera etapa de alabes moviles, durante el arranque de una turbina de gas, cubriendo un periodo de 1.012 segundos. El modelo computacional desarrollado es en tres dimensiones y utiliza como condiciones iniciales y de frontera curvas de arranque tipicas para los gases de combustion, el aire de enfriamiento y la velocidad angular de los alabes. Como resultado de las predicciones numericas, se incluyen las distribuciones de temperatura en los gases de combustion, la paleta del alabe y el aire de enfriamiento, haciendo enfasis en los resultados obtenidos en el solido (cuerpo del alabe), ya que estos se utilizan para analisis de esfuerzos termomecanicos y posterior estimacion de vida residual del alabe.

  2. APLIKASI METODE-METODE AGGLOMERATIVE DALAM ANALISIS KLASTER PADA DATA TINGKAT POLUSI UDARA

    Directory of Open Access Journals (Sweden)

    Dewi Rachmatin

    2014-09-01

    Full Text Available ABSTRAK   Analisis Klaster merupakan analisis pengelompokkan data yang mengelompokkan data berdasarkan informasi yang ditemukan pada data. Tujuan dari analisis klaster adalah agar objek-objek di dalam satu kelompok memiliki kesamaan satu sama lain sedangkan dengan objek-objek yang berbeda kelompok memiliki perbedaan. Analisis klaster dibagi menjadi dua metode yaitu metode hirarki dan metode non-hirarki. Metode hirarki dibagi menjadi dua, yaitu metode agglomerative (pemusatan dan metode divisive (penyebaran. Metode-metode yang termasuk dalam metode agglomerative adalah Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method. Pada artikel ini dibahas metode-metode agglomerative tersebut yang diterapkan pada data tingkat polusi udara. Masing-masing metode tersebut memberikan jumlah klaster yang berbeda.   Kata Kunci : Analisis Klaster, Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward’s Method, Centroid Method dan Median Method.     ABSTRACT Cluster analysis is an analysis of the data classification based on information found in the data.The objective of cluster analysis is that the objects in the group have in common with each other, while the different objects have different groups. Cluster analysis is divided into two methods : the method of non-hierarchical and hierarchical methods.Hierarchical method is divided into two methods, namely agglomerative methods (concentration and divisive methods (deployment. The methods included in the agglomerative method is Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward 's Method, Method and Median Centroid Method. In this article discussed the agglomerative methods were applied to the data rate of air pollution. Each of these methods provides a different number of clusters.   Keywords: Cluster Analysis , Single Linkage Method, Complete Linkage Method, Average Linkage Method, Ward

  3. Atlas of stress-strain curves

    CERN Document Server

    2002-01-01

    The Atlas of Stress-Strain Curves, Second Edition is substantially bigger in page dimensions, number of pages, and total number of curves than the previous edition. It contains over 1,400 curves, almost three times as many as in the 1987 edition. The curves are normalized in appearance to aid making comparisons among materials. All diagrams include metric (SI) units, and many also include U.S. customary units. All curves are captioned in a consistent format with valuable information including (as available) standard designation, the primary source of the curve, mechanical properties (including hardening exponent and strength coefficient), condition of sample, strain rate, test temperature, and alloy composition. Curve types include monotonic and cyclic stress-strain, isochronous stress-strain, and tangent modulus. Curves are logically arranged and indexed for fast retrieval of information. The book also includes an introduction that provides background information on methods of stress-strain determination, on...

  4. Transition curves for highway geometric design

    CERN Document Server

    Kobryń, Andrzej

    2017-01-01

    This book provides concise descriptions of the various solutions of transition curves, which can be used in geometric design of roads and highways. It presents mathematical methods and curvature functions for defining transition curves. .

  5. Comparison and evaluation of mathematical lactation curve ...

    African Journals Online (AJOL)

    p2492989

    A mathematical model of the lactation curve provides summary information about culling and milking strategies ..... Table 2 Statistics of the edited data for first lactation Holstein cows ..... Application of different models to the lactation curves of.

  6. MENENTUKAN PRIORITAS PILIHAN MAHASISWA DALAM MEMILIH KAMPUS MENGGUNAKAN ANALISIS CONJOINT

    Directory of Open Access Journals (Sweden)

    Maxsi Ary

    2016-03-01

    menganalisis preferensi mahasiswa Jurusan Manajemen Informatika AMIK BSI Bandung dalam memilih kampus. Penelitian preferensi mahasiswa dalam memilih kampus dilakukan dengan mengaplikasikan analisis conjoint menggunakan SPSS 17.0. Cara yang dilakukan adalah dengan memperoleh skor kegunaan yang dapat mewakili setiap aspek faktor jasa kampus yang dimiliki, sehingga dari skor tersebut dapat ditarik kesimpulan tentang atribut apa saja yang paling dipertimbangkan oleh mahasiswa dalam memilih kampus. Hasil preferensi responden yang bernilai paling tinggi adalah faktor Lapangan (14.92%, Kurikulum (13.21%, Akreditasi (12.75%, Dosen (12.13%, Gedung (11.96%, Perpustakaan (11.87%, Jarak (11.66%, dan Iklan (11.46%. Hasil utilitas agregat level faktor/atribut pilihan responden, bahwa responden menyukai jasa pendidikan dalam pemilihan kampus adalah kampus memiliki lapangan, kurikulum terbuka (pihak administasi menyampaikan terlebih dahulu diawal pendaftaran, kampus telah terakreditasi, pilihan dosen senior, ukuran gedung biasa saja (kurang diperhatikan, perpustakaan memiliki banyak koleksi buku, jarak antara rumah dan kampus dekat, dan iklan kurang diperhatikan. Kata Kunci: Statistik Multivariat, Analisis Conjoint, Preferensi

  7. Kembalikan Lagu Anak-anak Indonesia: Sebuah Analisis Struktur Musik

    Directory of Open Access Journals (Sweden)

    Ardipal - -

    2015-12-01

    . Yaitu musik sebagai pengembangan seni di lingkungan tertentu  dan musik sebagai seni komersial. Dari sisi musik komersial, hampir dua dekade terakhir  ini lagu anak-anak menghilang di media massa. Digantikan oleh lagu orang dewasa. Hal ini tentu mempengaruhi perkembangan psikologis, fisik, dan mental anak-anak. Secara teoritik, masalah ini hal ini dapat ditinjau dari produksi musik melalui pendekatan (1 konfik (hegemoni dan (2 interpretasi/makna. Penelitian ini bertujuan untuk membandingkan struktur musik lagu anak-anak dan struktur musik orang dewasa. Data diambil dari lagu anak-anak dan lagu pop orang dewasa. Metoda analisis difokuskan pada fitur lagu berdasarkan struktur musik dan dampaknya. Instrumen kunci dalam penelitian adalah peneliti sendiri dan instrumen pembantu berupa panduan kodifikasi data. Kemudian mendeskripsikan unsur-unsur tersebut yang terdapat dalam beberapa lagu anak-anak dan dewasa. Untuk menjaga keabsahan data, dilakukan kegiatan triangulasi data. Kegiatan analisis data dimulai dari tahap memilih dan mengodifikasi data, menganalisis data sesuai dengan fitur musiknya masing-masing, dan tahap menarik kesimpulan serta verifikasi. Dari data lagu yang diambil sebagai sampel penelitian, terlihat bahwa pola ritmis, melodis, interval, tempo, hingga rentang nada belum laik  dinyanyikan oleh anak-anak. Pemaksaan anak-anak untuk meniru lagu tersebut dapat berakibat fatal seperti kerusakan pita suara, kram otot rahang. Akhirnya, disarankan agar partisipan seni, dan juga Demikian juga jaringan infrastuktur seni, harus dapat memiliki pandangan yang sama dan kuat  dalam pengembangan seni musik di Indonesia, khususnya untuk lagu anak-anak. Kata Kunci: lagu anak-anak, lagu perjuangan, lagu orang dewasa, struktur musik

  8. Analisis Penerapan E-Government di Kabupaten Sragen

    Directory of Open Access Journals (Sweden)

    Yan Andriariza AS

    2013-09-01

    Full Text Available ABSTRAK Kabupaten Sragen merupakan salah satu pemerintah kabupaten yang menerapkan e-government dengan baik, dan merupakan kabupaten yang menjadi percontohan dalam suksesnya penerapan e-government. Karenanya perlu untuk dilakukan analisis penerapan e-government di Kabupaten Sragen, sebagai contoh bagi daerah lain dalam membangun e-government di daerah tersebut. Analisa yang dilakukan antara lain melihat seberapa jauh penerapan G2C, G2B dan G2G di Pemerintah Kabupaten Sragen. Selain itu juga dilakukan analisa menggunakan The UN Web Measure Index, dan analisa terakhir melakukan analisa deskriptif untuk 5 faktor kesuksesan penerapan e-government, yaitu Hukum dan Peraturan, Struktur Organisasi, Proses Bisnis, Teknologi Informasi dan Visi, Objektif dan Strategi. Dari hasil analisis diperoleh kesimpulan bahwa Kabupaten Sragen telah menerapkan G2B dan G2G, serta berada pada tahap awal penerapan G2C, selain itu Kabupaten Sragen juga telah mencapai pemerintahan yang online, tanpa kertas dan transparan. Implementasi e-government di kabupaten Sragen tersebut dapat dikatakan sukses karena telah memenuhi beberapa faktor dalam mencapai kesuksesan implementasi e-government, yaitu hukum dan peraturan, struktur organisasi, teknologi informasi dan visi, objektif dan strategi. Bila dilihat berdasarkan UN Web Measured Index, Kabupaten Sragen telah mencapai tahap 4. Saran yang dapat diberikan melalui penelitian ini adalah untuk unit kerja yang menangani TIK di Kabupaten Sragen akan lebih baik bila dipegang oleh unit kerja setingkat eselon 2 dan perlunya SOP dan peraturan tambahan terkait TIK di Kabupaten Sragen. ABSTRACT Sragen is one of the districts that implement well e-government, and being a model for the successful implementation of e-government. It is necessary to do the analysis of the application of e-government in Sragen, as an example for other regions in developing e-government in the area. Analysis was carried out to see how far the application of G2C

  9. Analisis Karaterisasi Konsentrasi dan Komposisi Partikulat Udara (Studi Case : Surabaya

    Directory of Open Access Journals (Sweden)

    Eka Fithriani Ahmad

    2016-12-01

    Full Text Available Abstrak Pencemaran udara merupakan dampak yang sangat merugikan, tidak hanya bagi manusia tetapi juga akan berdampak buruk bagi ekosistem hewan dan tumbuhan. Pada penelitian ini akan mengkaji pencemaran udara dari Oktober 2012 hingga Februari 2014 melalui penelitian konsentrasi dan komposisi dari partikulat udara dengan ukuran PM 2.5. Penelitian ini bertujuan untuk menentuan sumber asal pencemaran di Surabaya sehingga dapat dijadikan referensi berbasis ilmiah sebagai langkah untuk membuat keputusan dan kebijakan yang tepat dalam menanggulangi dampak pencemaran. Metode pengolahan data dalam penelitian ini adalah dengan menggunakan analisis reseptor modeling yaitu Positif Matrix Factorization (PMF untuk mengetahui sumber asal pencemaran. Hasil pengukuran yang diperoleh pada konsentrasi PM 2,5 adalah 15.05 μg/m3 sehingga telah melebihi baku mutu tahunan yang telah ditetapkan PP 41 tahun 1999, USEPA, maupun WHO. Dalam partikulat terdapat konsentrasi black carbon (BC sebesar 3.20 μg/m3 dan unsur Pb dengan konsentrasi 0.28 μg/m3 yang telah melebihi nilai baku mutu USEPA. Sedangkan hasil analisis reseptor modeling di dapatkan sumber asal polutan berasal dari biomass, vehicle, soil, industri Pb, industri Zn dan indutri Fe. Kata kunci: Partikulat mater 2.5, black carbon, Pb, positive matrix factorization, Surabaya   Abstract Air pollution is a very adverse impact, not only for humans but also the ecosystem of plants and animals. This research examine air pollution from October 2012 until February 2014 through the research of concentration and composition of airborne particulates with a size of PM 2.5 μm. This study aims to determine the origin and location of pollution sources in Surabaya so that it can be used as scientific reference as a step to make the right decisions and policies in tackling the impact of pollution. Data processing method in this research used analysis of receptor modeling that is Positive Matrix Factorization (PMF to determine

  10. ANALISIS POTENSI RETRIBUSI PELAYANAN PASAR DI KABUPATEN KENDAL

    Directory of Open Access Journals (Sweden)

    Herru Dwi Haryono

    2017-06-01

    Full Text Available Selama periode 2008-2012, realisasi retribusi pelayanan pasar ini mengalami tren naik turun. Sedangkan dari target yang ditentukan dalam komponen retribusi pelayanan pasar yakni retribusi pasar, retribusi sampah/kebersihan dan retribusi sewa kios rata-rata selalu terealisasi melebihi target. Penelitian ini bertujuan untuk mengetahui potensi retribusi pelayanan pasar di Kabupaten Kendal dan apakah target yang ditentukan sudah berdasarkan potensi yang ada. Data yang digunakan dalam penelitian ini adalah data sekunder. Data sekunder dalam penelitian ini berupa data yang bersumber dari BPS Kabupaten Kendal, DPPKAD    Kabupaten Kendal, Disperindag  Kabupaten  Kendal dan  UPTD Dinas  Pasar Kabupaten  Kendal.  Metode analisis yang digunakan yakni analisis deskriptif yakni menghitung potensi retribusi pelayanan pasar di Kabupaten Kendal dan membandingkan potensi dengan target dan apakah target yang ditentukan sesuai berdasarkan potensi yang ada. Hasil penelitian menunjukkan bahwa (1 potensi retribusi pelayanan pasar di Kabupaten Kendal sebesar Rp.5.130.789.600 pertahun. (2 target retribusi pelayanan pasar di Kabupaten Kendal selalu berada dibawah potensi yang ada, jadi kesimpulannya bahwa mekanisme penentuan target tidak berdasarkan potensi yang ada. Berdasarkan hasil anasilis data tersebut, saran yang dapat disampaikan adalah agar pemerintah daerah ataupun pengelola pasar dapat memanfaatkan secara maksimal potensi yang ada agar realisasi penerimaan retribusi pelayanan pasar dapat ditingkatkan lagi dan hendaknya mengevaluasi mekanisme penetapan target berdasarkan potensi yang ada agar kinerja pemerintah maupun pengelola pasar dapat ditingkatkan lagi yang akan berdampak pada realisasi penerimaan retribusi pelayanan pasar. During the period 2008-2012, the actual levy of service this market has been trending up and down. While the targets specified in the component market services levy market fees, garbage fees / levies hygiene and the average

  11. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI IMPOR BAJA DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Jhonson Agustinus Pasaribu

    2017-06-01

    Full Text Available Impor baja terus mengalami peningkatan dari tahun 1980-2012, hal ini disebabkan karena tingkat produksi baja tidak mampu mengimbangi dan memenuhi tingkat konsumsi baja. Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi impor baja di Indonesia. Metode analisis yang digunakan adalah Error Corection Model (ECM. Pengujian secara parsial digunakan uji t-statistik dan pengujian secara serempak digunakan uji F-statistik. Hasil penelitian ini menunjukan bahwa Produksi baja berpengaruh negatif dan signifikan terhadap impor baja dalam jangka panjang dan jangka pendek. Konsumsi baja menunjukan pengaruh positif dan signifikan terhadap impor baja dalam jangka panjang dan jangka pendek. Gross Domestic Product (GDP menunjukan pengaruh yang negatif dan tidak signifikan terhadap impor baja dalam jangka panjang dan jangka pendek. Nilai tukar rupiah (Kurs menunjukan pengaruh yang positif dan tidak signifikan terhadap impor baja dalam jangka panjang dan jangka pendek.  The steel import keep having enhancement from 1980 to 2012, it’s because of steel production level can’t fulfill the steel consumption level. If the high level of the steel import volume continues, domestic steel industries will run into a low impact for Indonesian’s economy. The goal of this research analize the affecting factors of steel import in Indonesia. The analytical method use the Error Correction Model (ECM. The partial test use t-statistic and the simultan test use F-statistic. The results showed that the steel production has negative and significant effect on steel import in the long term and short term. The steel consumption has positive and significant effect on steel import in the long term and short term. The Gross Domestic Product (GDP has negative and not significant effect on steel import in the long term and short term. The exchange rate indicates positive and not significant effect on steel import in the long term and short term.

  12. ANALISIS REKRUITMEN TENAGA PENDIDIK PADA SD KALAM KUDUS PEKANBARU

    Directory of Open Access Journals (Sweden)

    Murnawati Murnawati

    2015-04-01

    Full Text Available Abstrak: Penelitian ini dilakukan untuk mengetahui sistem rekrutmen tenaga pendidik pada SD kalam kudus kota Pekanbaru. Populasi dalam penelitian ini adalah tenaga pendidik di SD Kalam Kudus Kota Pekanbaru, kebutuhan guru sebanyak 65 sedangkan guru tetap sebanyak 40 guru dan sisanya guru honor sebanyak 25 guru. Dalam penelitian ini penulis mengambil sampel seluruh populasi. Pengambilan sampel dilakukan secara sensus. Data yang digunakan adalah data primer yang diperoleh dari wawancara langsung dan penyebaran kuesioner. Analisis data dalam penelitian ini adalah menggunakan metode deskriptif. Berdasarkan hasil penelitian dapat disimpulkan bahwa persyaratan administrasi dalam rekruitmen guru diperoleh rata – rata skor sebesar 3,49. Artinya persyaratan administrasi dalam rekruitmen guru pada SD Kalam Kudus Pekanbaru dinilai baik. Abstract: This research aimed to determine the system of teachers’s recruitment in Kalam Kudus elementary school of Pekanbaru. The population in this study were educators in in Kalam Kudus elementary school of Pekanbaru, the teacher needs as much as 65 while the teacher remains as much as 40 teachers and teacher salaries remaining 25 teachers. In this study the authors took samples of the entire population. Sampling was done by census. The data used is primary data obtained from interviews and questionnaires. Data analyzed by descriptive method. Based on the results of this study concluded that the administrative requirements for the recruitment of teachers obtained average - average score of 3.49. This means that the administrative requirements for the recruitment of teachers in elementary Holy Kalam Pekanbaru considered good. Kata Kunci : Rekruitmen, Tenaga Pendidik

  13. ANALISIS EFEKTIVITAS PEMBERIAN PINJAMAN PROGRAM PEMBIAYAAN UMKM OLEH KOPERASI

    Directory of Open Access Journals (Sweden)

    Hadi Ismanto

    2014-10-01

    Full Text Available Abstrak: Analisis Efektivitas Pemberian Pinjaman Program Pembiayaan UMKM Oleh Koperasi. Program Pembiayaan memiliki peran yang penting bagi UMKM, namun sering menghadapi masalah penunggakan dan kemacetan pembayaran angsuran. Penelitian ini berupaya untuk mengetahui sebab-sebab tidak lancarnya pengembalian Program Pembiayaan UJKS sehingga diharapkan dapat menyusun strategi yang lebih baik lagi dalam menyeleksi calon peminjam agar angka pinjaman bermasalah dapat ditekan. Populasi dalam penelitian ini adalah semua UMKM yang menjadi Peminjam (peminjam program pembiayaan UJKS Mitra Usaha dan masih tergolong aktif hingga bulan November 2013 dan telah memperoleh fasilitas pembiayaan sekurang-kurangnya enam bulan berjalan. Penelitian ini menemukan bahwa faktor-faktor yang berpengaruh positif terhadap tingkat pengembalian pinjaman (lancar atau menunggak adalah omzet usaha, lama usaha dan nilai plafon pinjaman. Hal ini dapat dijadikan bahan pertimbangan bagi UJKS dalam menjalankan program pembiayaan sehingga menjadi lebih efektif dalam menjalankannya.   Kata Kunci: UMKM, UJKS, Program Pembiayaan, Lancar, dan Macet.   Abstract: Effectiveness Analysis of SMEs Financing Program by Cooperative. Financing programs have an important role to SMEs, but often face the problem of repayment failures and installment payments. This study examines the causes of saving and loan cooperatives’ repayment problems. The population of this study is all SMEs borrowing from Mitra Usaha saving and loan cooperative. Furthermore these SMEs must be categorized as active SMEs until November 2013 and they had been receiving loan for at least six months. The study found that the variables such as: the length of the business, the business volume, and the value of the loan have a positive impact on repayment rate.   Keywords: SMEs, Saving and Loan Cooperative, Financing Program

  14. Analisis Kinerja Penerapan Container untuk Load Balancing Web Server

    Directory of Open Access Journals (Sweden)

    Muhammad Agung Nugroho

    2016-12-01

    Full Text Available Container merupakan teknologi virtualisasi terbaru. Container memudahkan system administrator dalam mengelola aplikasi pada server. Docker container dapat digunakan untuk membangun, mempersiapkan, dan menjalankan aplikasi. Dapat membuat aplikasi dari bahasa pemrograman yang berbeda pada lapisan apapun. Aplikasi dapat di bungkus dalam container, dan aplikasi dapat berjalan pada lingkungan apapun dimana saja.  Dalam perkembangannya container ini dapat digunakan untuk load balancing, dengan memanfaatkan HA Proxy. Load Balancing dapat digunakan untuk menyelesaikan permasalahan beban kinerja web server yang terlalu berat (overload terhadap permintaan. Load Balancing merupakan salah satu metode untuk meningkatkan skalabilitas web server sekaligus mengurangi beban kerja web server. Ujicoba dilakukan dengan memberikan beban request pada single container dan multi container, dan membandingkan kinerjanya. Analisis kinerja dapat dilakukan dengan menggunakan parameter performance pada processor, memori dan proses layanan. Penerapan ujicoba dilakukan pada raspberry pi. Hasil yang diperoleh multi container dapat digunakan untuk mengembangkan metode load balancing, hasil ujicoba menunjukkan performance raspberry pi dapat optimum karena pembagian beban processor.

  15. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI PENERIMAAN PAJAK

    Directory of Open Access Journals (Sweden)

    Phany Ineke Putri

    2013-09-01

    Full Text Available The purpose of this study was to analyze the influence of population, income per capita, inflation and the number of Trade Permit toward billboard tax revenue in Purbalingga. The results of this study is expected to provide benefit and input to the Local Government of Purbalingga, especially Departement of management of financial income and regional asset. Analysis tool used is multiple linear regression (Multiple Linear Regression Method by the method of least squares Ordinary Least Square (OLS. Jointly test results showed that overall independent variables (population, income per capita, inflation, and the number of trade permit together to show their effects on the billboard tax revenue. Adjusted R-Squared value of 0,951, which means 95,1 percent of the four independent variables. While the remaining 4,9 percent is explained by other causes outside the model. The results showed that the per capita income variable and the number of trade permit have a significant positive effect, the inflation variable has a significant negative effect, whereas a number of population variable have a positive effect which is not significant at α = 5 percent of tax revenue in Purbalingga billboard. Tujuan dari penelitian ini adalah untuk menganalisis pengaruh jumlah penduduk, pendapatan per kapita, inflasi dan jumlah surat ijin usaha perdagangan (SIUP terhadap penerimaan pajak reklame di Kabupaten Purbalingga. Manfaat penelitian ini diharapkan menjadi bahan masukan Pemerintah Kabupaten Purbalingga khususnya Dinas Pengelolaan, Pendapatan, Keuangan dan Aset Daerah. Teknik analisis yang digunakan adalah regresi berganda dengan metode Ordinary Least Square (OLS. Hasil penelitian menunjukkan ada pengaruh secara bersama-sama variabel jumlah penduduk, pendapatan per kapita, inflasi dan jumlah surat ijin usaha perdagangan terhadap penerimaan pajak reklame. Koefisien determinasi 95,1% dapat dijelaskan oleh variabel independen terhadap variabel dependen, dan sisanya

  16. Analisis Elektron Beam Profile Constancy pada Pesawat Linac

    Directory of Open Access Journals (Sweden)

    Edi Guritna

    2018-02-01

    Full Text Available Radioterapi adalah pengobatan penyakit terutama tumor atau kanker ganas dengan menggunakan radiasi elektromagnetik (Sinar-X dan Gamma dan radiasi partikel (elektron, proton, dan neutron. Salah satu alat radioterapi modern yang digunakan dalam pengobatan penyakit kanker adalah linear accelerator (linac. Alat radioterapi ini menghasilkan elektron dan sinar-X (foton yang dibangkitkan oleh generator dan mempunyai energi yang bervariasi. Dalam penelitian profil dosis, digunakan pesawat liner accelerator (linac Siemens Primus berkas elektron 5 MeV dengan luas lapangan radiasi berkisar dari 5×5 cm2 sampai 25×25 cm2. Pengukuran profil dosis dilakukan dengan menggunakan water phantom,  detektor farmer chamber dan condenser chamber yang dilengkapi dengan  computer control units (CCU serta dilakukan untuk arah crossline dan inline pada kedalaman Dmax dan kedalaman tertentu. Penelitian ini bertujuan untuk menganalisis profil berkas sinar elektron energi 5 MeV pada kedalaman tertentu dan Dmax dengan variasi luas lapangan 5×5 cm2, 10×10 cm2, 15×15 cm2, 20×20 cm2, 25×25 cm2. Hasil analisis profil dosis pada berkas elektron 5 MeV menunjukkan bahwa lapangan 5×5 cm2 memiliki nilai flatness yang cukup besar sehingga dalam kalibrasi maupun terapi radiasi perlu diperhatikan penggunaan  luas lapangan tersebut. Dalam penelitian ini juga didapatkan bahwa nilai flatness paling ideal (nilai flatness rendah terjadi pada lapangan 15×15 cm2. Sehingga ada luas lapangan lain yang bisa digunakan untuk treatment maupun kalibrasi selain 10×10 cm2 yaitu 15×15 cm2 yang memiliki nilai flatness rendah.

  17. ANALISIS JENIS, JUMLAH DAN MUTU SARAPAN PAGI SISWA SEKOLAH DASAR

    Directory of Open Access Journals (Sweden)

    Sopiyandi Sopiyandi

    2016-01-01

    Full Text Available Abstract: Type Analysis, Number and Quality Breakfast of Children on Elementary School. The research objective is to analyze the full breakfast at the elementary school students in District Rasau Jaya covering aspects of the type, quantity and quality of the breakfast. This research is an analytic with Cross sectional study design. Subjects were students at SDN 1 Rasau Jaya aged 8-12 years, a large sample of 215 respondents. The results showed that as many as 98.6% of students breakfasts with ten types of food most consumed by children during breakfast ie eggs, white rice, fried rice, yellow rice, tempeh, bulb meatballs, dumplings, bread, sausages and porridge. While the five types of beverage most consumed by children during breakfast was tea, milk, juice, water, and syrup. 54% of the number of good energy, 51% protein and 68.4% fat in both categories. 61.9% carbohydrate intake is not good. The nutritional quality of food is quite good kid. Abstrak : Analisis Jenis, Jumlah Dan Mutu Sarapan Pagi Siswa Sekolah Dasar. Tujuan penelitian yaitu untuk menganalisis sarapan pagi pada siswa Sekolah Dasar di Kecamatan Rasau Jaya meliputi aspek jenis, jumlah dan mutu sarapan. Penelitian ini bersifat analitik dengan desain penelitian Cross sectional. Subjek penelitian adalah siswa SDN 1 Rasau Jaya usia 8-12 tahun, besar sampel penelitian sebanyak 215 responden. Hasil penelitian menunjukkan bahwa sebanyak 98,6 % siswa sarapan dengan sepuluh jenis makanan yang paling banyak dikonsumsi oleh anak selama sarapan yaitu telur ayam, nasi putih, nasi goreng, nasi kuning, tempe, pentol bakso, siomay, roti, sosis, dan bubur. Sedangkan lima jenis minuman yang paling banyak dikonsumsi oleh anak selama sarapan adalah teh, susu, air jeruk, air putih, dan sirup. Sebanyak 54% jumlah energi baik, protein 51 % dan lemak 68,4% pada kategori baik. 61,9% asupan karbohidrat tidak baik. Mutu gizi pangan anak tergolong baik.

  18. ANALISIS STILISTIKA WACANA TERJEMAHAN RESMI NASKAH PRASASTI PLUMPUNGAN (KAJIAN HISTORIS

    Directory of Open Access Journals (Sweden)

    Hristina Nikolic

    2008-12-01

    Full Text Available This article mainly deals with the Plumpungan manuscript discourse, an ancient stone inscription found in the Salatiga area. The manuscript dates back to the 8th century and is one of the main historical sources of the Salatiga municipality. There is a tight connection involving the above mentioned inscription with the legitimacy of the Javanese court at that time, as well as with the monarch, who was seen as half- man, half-deity. The monarch drew on the labor of his subjects in maintaining reli- gious sites to ensure his place on earth, and in heaven. The Plumpungan manuscript was a ‘legal document’ used to reassure inhabitants of the area that the monarch is the legitimate ruler, and to prevent further revolt. The monarch’s subjects in the Salatiga area at the time were farmers disheartened with high taxes and the fear of volcanic eruptions, which later caused great migrations to East Java. Consequently, the mon- arch, using the Plumpungan manuscript as a medium, decreed that the Hampra vil- lage (present-day Salatiga become a tax-free area due to the excellent care that its citizens provided for the religious sites, in addition to the obeisance shown to the monarch. It becomes clear, however, that all the way through the discourse analysis, the king wanted to ensure his legitimacy. Socio-historical context confirms that the monarch, Bhanu, was a successful ruler who held power over four regions, analogi- cally with Indra, the king of all deities. Discourse analysis is detained under three main dimensions, which is grammatical, lexical and contextual, unified from be- ginning to end in a particular style that reveals genuinely hidden meaning.     Key words: manuscript, Plumpungan, kodikologi, dan analisis stilistika.

  19. KONDISI CURAH HUJAN PADA KEJADIAN BANJIR JAKARTA DAN ANALISIS KONDISI UDARA ATAS WILAYAH JAKARTA BULAN JANUARI – FEBRUARI 2013

    OpenAIRE

    Syaifullah, M. Djazim

    2018-01-01

    IntisariKondisi curah hujan di wilayah Jakarta pada kejadian banjir besar tanggal 17 Januari 2013 telah dianalisis yang dihubungkan dengan kondisi atmosfer pada selang waktu tersebut. Data curah hujan menggunakan data TRMM sedangkan analisis kondisi atmosfer menggunakan data rawinsonde. Hasil analisis menunjukkan bahwa puncak kejadian banjir Jakarta musim hujan tahun 2013 terjadi pada tanggal 17 Januari 2013 disebabkan oleh faktor lokal yang sangat kuat ditambah dengan faktor global yang mend...

  20. Analisis Spasial Kejadian Filariasi di Kabupaten Demak Jawa Tengah

    Directory of Open Access Journals (Sweden)

    Nurjazuli Nurjazuli

    2018-04-01

    Full Text Available Latar Belakang: Filariasis merupakan salah satu penyakit tular vektor yang kurang mendapatkan perhatian, termasuk kelompok Neglected Tropical Diseases (NTDs. Kabupaten Demak merupakan salah satu wilayah di Propinsi Jawa Tengah  yang merupakan daerah endemis filarisis (mf rate>1%. Kejadian filarisis di daerah ini diduga berkaitan dengan kondisi lingkungan fisik dan biologis (nyamuk yang mempunyai peran penting dalam penyebaran penyakit filarisis. Penelitian ini bertujuan untuk menemukan adanya penderita baru,  mengidentifikasi kondisi lingkungan fisik dan biologi yang berkaitan dengan sebaran filarisis di Kabupaten Demak. Matede: Penelitian ini merupakan penelitian observasional dengan rancangan cross-sectional. Sebanyak 30 kasus filariasis dijadikan indek kasus yang selanjutnya dipilih secara purposif sebanyak 140 yang tinggal di sekitar 30 kasus tersebut untuk dilakukan pengamblan darah jari. Observasi lingkungan dilakukan untuk mengidentifikasi kondisi lingkungan (breeding places dan resting places dari yang diduga sebagai nyamuk vektor filariasis. Penangkapan nyamuk dilakukan di sekitar rumah penderita filariasis. Pengukuran koordinat kasus filariais dilakukan dengan pesawat Geographic Positioning System (GPS. Pemeriksaan darah jadi jari dilakukan di Laboratorium Kesehatan Daerah (LABKESDA Propinsi Jawa Tengah. Sedang bedah nyamuk dilakukan di Balai Penelitian Vektor Penyakit Banjarnegara. Analisis data dlakukan secara deskriptif, analisis spasial dilakukan dengan software ArcGis 9.3. Hasil: Penelitian ini tidak menemukan penderita baru filarisis (mf rate=0%. Sebanyak 129 ekor nyamuk telah dilakukan pembedahan dengan hasil semuanya negatip cacing filaria. Hasil identifikasi nyamuk menemukan spesies nyamuk Culex quinquefasciatus merupakan nyamuk yang dominan (72,86% di lokasi penelitian.Terdapat breeding places (40% berupa genangan air terbuka (SPAL dan resting places (83,3% berupa semak-semak di sekitar rumah penderita. Analisis spasial

  1. Gelfond–Bézier curves

    KAUST Repository

    Ait-Haddou, Rachid; Sakane, Yusuke; Nomura, Taishin

    2013-01-01

    We show that the generalized Bernstein bases in Müntz spaces defined by Hirschman and Widder (1949) and extended by Gelfond (1950) can be obtained as pointwise limits of the Chebyshev–Bernstein bases in Müntz spaces with respect to an interval [a,1][a,1] as the positive real number a converges to zero. Such a realization allows for concepts of curve design such as de Casteljau algorithm, blossom, dimension elevation to be transferred from the general theory of Chebyshev blossoms in Müntz spaces to these generalized Bernstein bases that we termed here as Gelfond–Bernstein bases. The advantage of working with Gelfond–Bernstein bases lies in the simplicity of the obtained concepts and algorithms as compared to their Chebyshev–Bernstein bases counterparts.

  2. Bubble Collision in Curved Spacetime

    International Nuclear Information System (INIS)

    Hwang, Dong-il; Lee, Bum-Hoon; Lee, Wonwoo; Yeom, Dong-han

    2014-01-01

    We study vacuum bubble collisions in curved spacetime, in which vacuum bubbles were nucleated in the initial metastable vacuum state by quantum tunneling. The bubbles materialize randomly at different times and then start to grow. It is known that the percolation by true vacuum bubbles is not possible due to the exponential expansion of the space among the bubbles. In this paper, we consider two bubbles of the same size with a preferred axis and assume that two bubbles form very near each other to collide. The two bubbles have the same field value. When the bubbles collide, the collided region oscillates back-and-forth and then the collided region eventually decays and disappears. We discuss radiation and gravitational wave resulting from the collision of two bubbles

  3. Bacterial streamers in curved microchannels

    Science.gov (United States)

    Rusconi, Roberto; Lecuyer, Sigolene; Guglielmini, Laura; Stone, Howard

    2009-11-01

    Biofilms, generally identified as microbial communities embedded in a self-produced matrix of extracellular polymeric substances, are involved in a wide variety of health-related problems ranging from implant-associated infections to disease transmissions and dental plaque. The usual picture of these bacterial films is that they grow and develop on surfaces. However, suspended biofilm structures, or streamers, have been found in natural environments (e.g., rivers, acid mines, hydrothermal hot springs) and are always suggested to stem from a turbulent flow. We report the formation of bacterial streamers in curved microfluidic channels. By using confocal laser microscopy we are able to directly image and characterize the spatial and temporal evolution of these filamentous structures. Such streamers, which always connect the inner corners of opposite sides of the channel, are always located in the middle plane. Numerical simulations of the flow provide evidences for an underlying hydrodynamic mechanism behind the formation of the streamers.

  4. Gelfond–Bézier curves

    KAUST Repository

    Ait-Haddou, Rachid

    2013-02-01

    We show that the generalized Bernstein bases in Müntz spaces defined by Hirschman and Widder (1949) and extended by Gelfond (1950) can be obtained as pointwise limits of the Chebyshev–Bernstein bases in Müntz spaces with respect to an interval [a,1][a,1] as the positive real number a converges to zero. Such a realization allows for concepts of curve design such as de Casteljau algorithm, blossom, dimension elevation to be transferred from the general theory of Chebyshev blossoms in Müntz spaces to these generalized Bernstein bases that we termed here as Gelfond–Bernstein bases. The advantage of working with Gelfond–Bernstein bases lies in the simplicity of the obtained concepts and algorithms as compared to their Chebyshev–Bernstein bases counterparts.

  5. Sibling curves of quadratic polynomials | Wiggins | Quaestiones ...

    African Journals Online (AJOL)

    Sibling curves were demonstrated in [1, 2] as a novel way to visualize the zeroes of real valued functions. In [3] it was shown that a polynomial of degree n has n sibling curves. This paper focuses on the algebraic and geometric properites of the sibling curves of real and complex quadratic polynomials. Key words: Quadratic ...

  6. GLOBAL AND STRICT CURVE FITTING METHOD

    NARCIS (Netherlands)

    Nakajima, Y.; Mori, S.

    2004-01-01

    To find a global and smooth curve fitting, cubic B­Spline method and gathering­ line methods are investigated. When segmenting and recognizing a contour curve of character shape, some global method is required. If we want to connect contour curves around a singular point like crossing points,

  7. Trigonometric Characterization of Some Plane Curves

    Indian Academy of Sciences (India)

    IAS Admin

    (Figure 1). A relation between tan θ and tanψ gives the trigonometric equation of the family of curves. In this article, trigonometric equations of some known plane curves are deduced and it is shown that these equations reveal some geometric characteristics of the families of the curves under consideration. In Section 2,.

  8. M-curves and symmetric products

    Indian Academy of Sciences (India)

    Indranil Biswas

    2017-08-03

    Aug 3, 2017 ... is bounded above by g + 1, where g is the genus of X [11]. Curves which have exactly the maximum number (i.e., genus +1) of components of the real part are called M-curves. Classifying real algebraic curves up to homeomorphism is straightforward, however, classifying even planar non-singular real ...

  9. Holomorphic curves in exploded manifolds: Kuranishi structure

    OpenAIRE

    Parker, Brett

    2013-01-01

    This paper constructs a Kuranishi structure for the moduli stack of holomorphic curves in exploded manifolds. To avoid some technicalities of abstract Kuranishi structures, we embed our Kuranishi structure inside a moduli stack of curves. The construction also works for the moduli stack of holomorphic curves in any compact symplectic manifold.

  10. Automated Blazar Light Curves Using Machine Learning

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Spencer James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-27

    This presentation describes a problem and methodology pertaining to automated blazar light curves. Namely, optical variability patterns for blazars require the construction of light curves and in order to generate the light curves, data must be filtered before processing to ensure quality.

  11. Method of construction spatial transition curve

    Directory of Open Access Journals (Sweden)

    S.V. Didanov

    2013-04-01

    Full Text Available Purpose. The movement of rail transport (speed rolling stock, traffic safety, etc. is largely dependent on the quality of the track. In this case, a special role is the transition curve, which ensures smooth insertion of the transition from linear to circular section of road. The article deals with modeling of spatial transition curve based on the parabolic distribution of the curvature and torsion. This is a continuation of research conducted by the authors regarding the spatial modeling of curved contours. Methodology. Construction of the spatial transition curve is numerical methods for solving nonlinear integral equations, where the initial data are taken coordinate the starting and ending points of the curve of the future, and the inclination of the tangent and the deviation of the curve from the tangent plane at these points. System solutions for the numerical method are the partial derivatives of the equations of the unknown parameters of the law of change of torsion and length of the transition curve. Findings. The parametric equations of the spatial transition curve are calculated by finding the unknown coefficients of the parabolic distribution of the curvature and torsion, as well as the spatial length of the transition curve. Originality. A method for constructing the spatial transition curve is devised, and based on this software geometric modeling spatial transition curves of railway track with specified deviations of the curve from the tangent plane. Practical value. The resulting curve can be applied in any sector of the economy, where it is necessary to ensure a smooth transition from linear to circular section of the curved space bypass. An example is the transition curve in the construction of the railway line, road, pipe, profile, flat section of the working blades of the turbine and compressor, the ship, plane, car, etc.

  12. Power forward curves: a managerial perspective

    International Nuclear Information System (INIS)

    Nagarajan, Shankar

    1999-01-01

    This chapter concentrates on managerial application of power forward curves, and examines the determinants of electricity prices such as transmission constraints, its inability to be stored in a conventional way, its seasonality and weather dependence, the generation stack, and the swing risk. The electricity forward curve, classical arbitrage, constructing a forward curve, volatilities, and electricity forward curve models such as the jump-diffusion model, the mean-reverting heteroscedastic volatility model, and an econometric model of forward prices are examined. A managerial perspective of the applications of the forward curve is presented covering plant valuation, capital budgeting, performance measurement, product pricing and structuring, asset optimisation, valuation of transmission options, and risk management

  13. Retrograde curves of solidus and solubility

    International Nuclear Information System (INIS)

    Vasil'ev, M.V.

    1979-01-01

    The investigation was concerned with the constitutional diagrams of the eutectic type with ''retrograde solidus'' and ''retrograde solubility curve'' which must be considered as diagrams with degenerate monotectic transformation. The solidus and the solubility curves form a retrograde curve with a common retrograde point representing the solubility maximum. The two branches of the Aetrograde curve can be described with the aid of two similar equations. Presented are corresponding equations for the Cd-Zn system and shown is the possibility of predicting the run of the solubility curve

  14. The writhe of open and closed curves

    International Nuclear Information System (INIS)

    Berger, Mitchell A; Prior, Chris

    2006-01-01

    Twist and writhe measure basic geometric properties of a ribbon or tube. While these measures have applications in molecular biology, materials science, fluid mechanics and astrophysics, they are under-utilized because they are often considered difficult to compute. In addition, many applications involve curves with endpoints (open curves); but for these curves the definition of writhe can be ambiguous. This paper provides simple expressions for the writhe of closed curves, and provides a new definition of writhe for open curves. The open curve definition is especially appropriate when the curve is anchored at endpoints on a plane or stretches between two parallel planes. This definition can be especially useful for magnetic flux tubes in the solar atmosphere, and for isotropic rods with ends fixed to a plane

  15. Path integrals on curved manifolds

    International Nuclear Information System (INIS)

    Grosche, C.; Steiner, F.

    1987-01-01

    A general framework for treating path integrals on curved manifolds is presented. We also show how to perform general coordinate and space-time transformations in path integrals. The main result is that one has to subtract a quantum correction ΔV ∝ ℎ 2 from the classical Lagrangian L, i.e. the correct effective Lagrangian to be used in the path integral is L eff = L-ΔV. A general prescription for calculating the quantum correction ΔV is given. It is based on a canonical approach using Weyl-ordering and the Hamiltonian path integral defined by the midpoint prescription. The general framework is illustrated by several examples: The d-dimensional rotator, i.e. the motion on the sphere S d-1 , the path integral in d-dimensional polar coordinates, the exact treatment of the hydrogen atom in R 2 and R 3 by performing a Kustaanheimo-Stiefel transformation, the Langer transformation and the path integral for the Morse potential. (orig.)

  16. Page curves for tripartite systems

    International Nuclear Information System (INIS)

    Hwang, Junha; Lee, Deok Sang; Nho, Dongju; Oh, Jeonghun; Park, Hyosub; Zoe, Heeseung; Yeom, Dong-han

    2017-01-01

    We investigate information flow and Page curves for tripartite systems. We prepare a tripartite system (say, A , B , and C ) of a given number of states and calculate information and entropy contents by assuming random states. Initially, every particle was in A (this means a black hole), and as time goes on, particles move to either B (this means Hawking radiation) or C (this means a broadly defined remnant, including a non-local transport of information, the last burst, an interior large volume, or a bubble universe, etc). If the final number of states of the remnant is smaller than that of Hawking radiation, then information will be stored by both the radiation and the mutual information between the radiation and the remnant, while the remnant itself does not contain information. On the other hand, if the final number of states of the remnant is greater than that of Hawking radiation, then the radiation contains negligible information, while the remnant and the mutual information between the radiation and the remnant contain information. Unless the number of states of the remnant is large enough compared to the entropy of the black hole, Hawking radiation must contain information; and we meet the menace of black hole complementarity again. Therefore, this contrasts the tension between various assumptions and candidates of the resolution of the information loss problem. (paper)

  17. Vacuum polarization in curved spacetime

    International Nuclear Information System (INIS)

    Guy, R.W.

    1979-01-01

    A necessary step in the process of understanding the quantum theory of gravity is the calculation of the stress-energy tensor of quantized fields in curved space-times. The determination of the stress tensor, a formally divergent object, is made possible in this dissertation by utilizing the zeta-function method of regularization and renormalization. By employing this scheme's representation of the renormalized effective action functional, an expression of the stress tensor for a massless, conformally invariant scalar field, first given by DeWitt, is derived. The form of the renormalized stress tensor is first tested in various examples of flat space-times. It is shown to vanish in Minkowski space and to yield the accepted value of the energy density in the Casimir effect. Next, the stress tensor is calculated in two space-times of constant curvature, the Einstein universe and the deSitter universe, and the results are shown to agree with those given by an expression of the stress tensor that is valid in conformally flat space-times. This work culminates in the determination of the stress tensor on the horizon of a Schwarzschild black hole. This is accomplished by approximating the radial part of the eigen-functions and the metric in the vicinity of the horizon. The stress tensor at this level approximation is found to be pure trace. The approximated forms of the Schwarzschild metric describes a conformally flat space-time that possesses horizons

  18. Analisis Perencanaan dan Penganggaran Pada Dinas Pendidikan Provinsi Jambi

    Directory of Open Access Journals (Sweden)

    Meri Darlina

    2016-06-01

    Full Text Available Abstract This research tried to investigate the analysis of consistency between planning and budgeting in education departement of Jambi Province year 2011 to 2015 which viewed by the planning and budgeting document of education in Jambi Province such as; RPJMD year 2010-2015, Renstra year 2010-2015, RKPD yaer 2011-2015, Renja year 2011-2015, PPAS year 2011-2015, RKA year 2011-2015, and DPA of APBD Education department year 2011-2015. The result of the analysis continuosly was analyzed by using Matrik of Planning and Budgeting Consolidation (MKPP for investigate level of consistency that occur and analyzed what kind of factors which caused inconsistency and what kind of effort has been done to create consistency between planning and budgeting.             The result showed level of planning and budgeting consistency between document of planning and budgeting still low. The highest consistency available in PPAS document and APBD document. The cause of inconsistency is leader policy, human resources limitedness, less coordination between sub-department and SKPD, high frequency of leader commutation and goverment’s role changing. Efforts are being made to achieve consistency between planning and budgeting is the functional improvement of human resource planning, improved coordination between field and education and the establishment of an electronic planning system (E-Planning. Keyword : Consistency, Planning, Budgeting, Education, Region Goverment   Abstrak. Penelitian ini bertujuan untuk menganalisis konsistensi antara perencanaan dan penganggaran pada Dinas Pendidikan Provinsi Jambi Tahun 2011-2015 yang dilihat dari dokumen perencanaan dan pengaggaran pendidikan di Provinsi Jambi seperti RPJMD Tahun 2010-2015, Renstra Tahun 2010-2015, RKPD Tahun 2011-2015, Renja 2011-2015, PPAS Tahun 2011-2015, RKA Tahun 2011-2015, dan DPA Dinas Pendidikan APBD Tahun 2011-2015.Hasil analisa tersebut selanjutnya di analisis dengan menggunakan Matrik

  19. ANALISIS TRANSIEN PADA PASSIVE COMPACT MOLTEN SALT REACTOR (PCMSR

    Directory of Open Access Journals (Sweden)

    M. Makrus Imron

    2015-04-01

    Full Text Available Penggunaan bahan bakar cair berupa garam LiF-BeF2-ThF4-UF4 pada Passive Compact Molten Salt Reactor (PCMSR meyebabkan pengendalian daya pada PCMSR dapat dilakukan dengan mengendalikan laju aliran bahan bakar dan pendingin. Sedangkan dari sistem keselamatan, penggunaan bahan bakar cair menjadikan PCMSR memiliki karakter keselamatan melekat (inherent safety yang baik. Pada penelitian ini telah dilakukan analisis transien PCMSR pada tiga kondisi, yaitu: ketika terjadi perubahan laju aliran bahan bakar, ketika terjadi perubahan laju aliran pendingin dan ketika terdapat kegagalan pada sistem pelepasan panas (loss of heat sink. Penelitian dilakukan dengan memodelkan reaktor pada kondisi tunak menggunakan paket program. Standart Reactor Analysis Code (SRAC. Selanjutnya dari keluaran paket program SRAC diperoleh data data yang meliputi fluks netron,konstanta grup, kontanta peluran prekusor netron, fraksi netron kasip untuk perhitungan transien. Penelitian ini menunjukkan bahwa penurunan laju aliran bahan bakar sebesar 50 % dari laju bahan bakar sebelumnya, menyebabkan daya pada PCMSR turun menjadi 78 % dari daya sebelumnya. Dan penurunan laju aliran pendingin sebesar 50 % dari laju pendingin sebelumnya, menyebabkan daya pada PCMSR turun menjadi 63 % dari daya sebelumnya. Sedangkan pada saat terjadi loss of heat sink daya PCMSR menunjukkan penurunan. Kata kunci: PCMSR, transien, daya, laju aliran.   The use of liquid fuels in the form of molten salts LiF-BeF2-ThF4-UF4 in Passive Compact Molten Salt Reactor (PCMSR makes power control at PCMSR can be done by controlling the flow rate of fuel and coolant. In addition, from safety systems aspect, the use of liquid fuels makes PCMSR has good inherent safety characteristics. In this study transient analysis has been carried out on three conditions of PCMSR, namely when the fuel flow rate is changing, when the coolant flow rate is changing and when there is loss of heat sink condition. This research is

  20. Analisis Sikap Pengguna Paytren Menggunakan Technology Acceptance Model

    Directory of Open Access Journals (Sweden)

    Moh Siri

    2017-04-01

    Full Text Available Abstrak Semakin pesatnya aplikasi berbasis android mendorong masyarakat beralih dan menggunakan. Melakukan transaksi dan pembayaran ke loket-loket Paymen Point Online Bank (BPOB yang dirasa kurang membantu masyarakat dalam kegiatan transkasi. Oleh karenanya hadir sebuah layanan terknologi dibidang micropayment dengan perangkat lunak bernama PayTren yang dapat digunakan untuk pembayaran transaksi dalam jumlah kecil  (micropayment berbasis android yang merupakan salah satu alternatif tepat dan bermanfaat untuk sarana mempermudah pengguna dalam melakukan transaksi atau pembayaran serta mampu menggeser jenis pembayaran pada loket-loket pembayaran pada umumnya. Tujuan dalam penelitian ini adalah untuk menganalisis sikap pengguna aplikasi PayTren berbasis android dengan menggunakan metode Technology Acceptance Model (TAM, serta pengujian menggunakan analisis regresi. Manfaat penelitian ini adalah sebagai referensi untuk penelitian selanjutnya dengan menggunakan metode TAM dan ditambahkan variabel yang lain. Hasil dari penelitian ini persepsi kegunaan (perceived usefullness dan persepi kemudahan (perceived easy of use memiliki pengaruh yang dikategorikan kuat dan lemah terhadap (attitude toward using sikap pengguna. Kata Kunci: Aplikasi, Android, PayTren, Technology Acceptance Model.                                                                                                                             Abstract The more rapid the android-based applications are pushing the community move on and use. Transaction and payment to the counter-the counter of Paymen Point Online Bank (BPOB where less help the community in dealings. Therefore present a terknologi service in the field of micropayment with software called PayTren that can be used for payment transactions in small amounts (micropayment android-based which is one of the alternatives is right and beneficial for the means of

  1. ANALISIS PARITAS DAYA BELI KURS RUPIAH TERHADAP DOLLAR AMERIKA SERIKAT

    Directory of Open Access Journals (Sweden)

    Elysa Pernika Simanjuntak

    2017-06-01

    Full Text Available Penelitian ini bertujuan untuk menganalisis bagaimana penerapan teori paritas daya beli kurs Rupiah terhadap Dollar AS dalam jangka panjang maupun jangka pendek dan pengaruh tingkat inflasi, produk domestik bruto, jumlah uang beredar, dan cadangan devisa terhadap kurs Rp/USD dengan menggunakan alat analisis Error Correction Model Engle-Granger. Variabel dependen dalam penelitian ini adalah kurs, sedangkan variabel independennya adalah inflasi, produk domesti bruto, jumlah uang beredar, dan cadangan devisa. Hasil penelitian ini menunjukkan bahwa dalam jangka panjang maupun jangka pendek, teori paritas daya beli berlaku pada kurs Rupiah terhadap Dollar Amerika Serikat. Variabel independen secara bersama-sama berpengaruh terhadap kurs Rupiah dalam jangka pendek maupun jangka panjang kecuali variabel jumlah uang beredar tidak berpengaruh dalam jangka panjang dan cadangan devisa tidak berpengaruh terhadap kurs dalam jangka pendek. Rekomendasi dari penelitian ini adalah Bank Indonesia selaku bank sentral Republik Indonesia diharapkan lebih berhati- hati dalam mengambil kebijakan yang tepat demi menjaga kestabilan nilai tukar Rupiah. Salah satunya tetap mengawasi kebijakan yang ditetapkan pemerintah mengenai pemakaian Rupiah untuk seluruh transaksi dalam negeri.  This research aims to analyze how the application of the theory of purchasing power parity exchange rate of the Rupiah against the US Dollar in the long term and short term and influence the rate of inflation, GDP, money supply, and the foreign exchange reserves of the exchange rate of Rp/USD by using analytical tools Error Correction Model Engle-Granger. Dependent variable in this study is the exchange rate, while the independent variables are inflation, gross domestic product, money supply, and the foreign exchange reserves. The results of this study indicated that in the long term and short term, the theory of purchasing power parity exchange rate prevailing at the Rupiah against the US

  2. ANALISIS HOMOGENITAS DATA CURAH HUJAN TAHUNAN KOTA MAKASSAR

    Directory of Open Access Journals (Sweden)

    Wahidah Sanusi

    2016-12-01

    Full Text Available Abstract. Homogeneity Analysis Of Annual Rainfall Data Of Makassar City. Testing the homogeneity of rainfall series is often required in climate and hydrology studies to ensure that rainfall data can be used reliability. The objective of this study is to identify homogeneity of annual rainfall data for three rainfall stations in Makassar for the period from 1985 to 2014. These stations are Paotere station, station of Biring Romang, and station of  BBMKG region IV. Four tests for homogeneity were applied for each station. These tests include the Standard Normal Homogeneity (SNH test, Buishand Range (BR test, Pettitt test and the von Neumann Ratio test. The SNH, BR, and Pettitt tests indicate that there was no break point for all station, except at Paotere station, Pettitt test shows that there was a break point in 1994. However, based on four homogeneity tests, the results reveal that rainfall series of Makassar city is homogeneous. The study results are usefull information for rainfall modeling of Makassar city.Abstrak. Analisis Homogenitas Data Curah Hujan Tahunan Kota Makassar. Pengujian homogenitas data runtun curah hujan sering diperlukan dalam kajian iklim dan hidrologi untuk menjamin kehandalan data yang digunakan. Tujuan penelitian ini adalah untuk mendeteksi kehomogenan data jumlah curah hujan tahunan di tiga stasiun hujan di kota Makassar dalam kurun waktu 1985 hingga 2014. Ketiga stasiun hujan tersebut adalah stasiun Paotere, stasiun Biring Romang, dan stasiun BBMKG wilayah IV. Ada empat uji homogenitas yang digunakan pada setiap stasiun, yaitu uji Standard Normal Homogeneity (SNH, uji Rentang Buishand (BR, uji Pettitt, dan uji Rasio von Neumann. Uji SNH, BR, dan Pettitt menunjukkan bahwa tidak terjadi perubahan jumlah curah hujan tahunan pada semua stasiun kajian, kecuali di stasiun Paotere, uji Pettitt menunjukan bahwa telah terjadi perubahan pada tahun 1994. Namun demikian, berdasarkan empat uji homogenitas tersebut menunjukkan

  3. Analisis Kesesuaian Kursi Pembatik Terhadap Kondisi Antropometri Pekerja Batik Tulis

    Directory of Open Access Journals (Sweden)

    Joni Setiawan

    2016-04-01

    Full Text Available ABSTRAKSejak diakuinya Batik sebagai warisan budaya tak benda oleh UNESCO, perkembangan industri batik mengalami perkembangan seiring dengan peningkatan permintaan pasar. Pada saat ini peralatan utama untuk membatik (kursi, gawangan, canting, kompor, meja cap, canting cap, wajan cap, dan lain-lain masih menggunakan peralatan batik yang lama, yang belum diteliti mengenai usability dan safety-nya. Tujuan dari penelitian ini adalah untuk mengkaji ukuran kursi dan gawangan pembatikan yang beredar di pasaran apakah telah sesuai dengan kebutuhan pembatik dan sesuai dengan konsep ergonomi. Pengumpulan data kursi dan gawangan dari berbagai tempat industri batik. Data yang diperlukan diwakili oleh N = 30 buah. Data-data ini kemudian dilakukan analisis statistik dengan metode histogram. Penggunaan kursi pembatikan di industri batik masih sangat jauh dari kondisi ideal (minimum tinggi 370 mm, lebar 380 mm dan kedalaman 380 mm. Ukuran tinggi kursi pembatik yang ada, rata-rata hanya berketinggian alas duduk 263,7 mm, lebar alas duduk 353 mm, kedalaman alas duduk 305 mm, dan tanpa menggunakan sandaran punggung.Kata kunci: kursi pembatikan, ergonomi, antropometriABSTRACTSince the approval of batik as an intangible cultural heritage by UNESCO, the improvement of batik industry have evolved along with the increase in market demand. At this time the main equipment for batik processes are still using the old batik equipment that has not been studied regarding its usability and safety. The purpose of this study was to assess the size of the seat and gawangan batik on the market whether in accordance with the requirements in accordance with the concept of batik and ergonomics. The data collected from several places batik industry. The data required to make is represented by N = 30 pieces. These data are then performed statistical analysis with the histogram method. The use of seat batik batik industry is still very far from ideal conditions. The size of the existing

  4. ANALISIS BANTUAN KREDIT TERHADAP PERKEMBANGAN KELOMPOK USAHA BERSAMA

    Directory of Open Access Journals (Sweden)

    Priyo Harsono

    2012-09-01

    Full Text Available The object of research is KUB Rukun Mina Barokah in Juwana, Pati. The purpose of research is to investigate the differences of KUB Rukun Mina Barokah development before and after getting the credit assistance from the Department of Marine and Fisheries, Pati in terms of capital, labor, thenumber of buyers, the total sales, and profits. The population for this research is 45 small micro enterprises. The type of data collected are primary and secondary data. The methods of data analysis are validity test, reliability test, and Wilcoxon sign rank test statistics. Based on the results of Wilcoxon sign rank test statistics which focuses on the variables of capital, labor, number of buyers, total sales and profit , it is obtained that p-value is 0.000 (0.000 <0,05. It shows that the credit assistance of the Department of Marine and Fisheries, Pati has given the changes in the joint venture group, Rukun Mina Barokah. The changes here means an increase in the variables before and after getting the credit assistance. Therefore, besides financial aid in the form of business loans, collaboration expansion is also needed to develop the business groups (KUB Objek dalam penelitian ini adalah KUB Rukun Mina Barokah di Kecamatan Juwana Kabupaten Pati. Tujuan penelitian ini untuk mengetahui perbedaan perkembangan KUB Rukun Mina Barokah sebelum dan sesudah mendapatkan bantuan kredit dari Dinas Kelautan dan Perikanan Kabupaten Pati ditinjau dari modal usaha, tenaga kerja, jumlah pembeli, total penjualan, dan keuntungan. Populasi penelitian sebanyak 45 usaha mikro kecil.Jenis datanya adalah data primer dan data sekunder.Metode analisis data meliputi uji validitas, uji reabilitas, dan uji statistic pangkat tanda wilcoxon.Berdasarkan hasil uji statistik pangkat tanda wilcoxon, baik variabel modal usaha, variabel tenaga kerja,variabel jumlah pembeli, variabel total penjualan maupun variabel keuntungan didapatkan nilai -p sebesar 0,000 (0,000 < 0,05. Hal itu

  5. Evaluasi dan Analisis Dampak Program Corporate Social Responsibility Badak LNG

    Directory of Open Access Journals (Sweden)

    Hanes Utama

    2017-08-01

    Full Text Available Program CSR Badak LNG telah melibatkan masyarakat dalam proses perencanaan, pelaksanaan, sampai pada proses monitoring dan evaluasi. Hal ini tentu berdampak pada peningkatan kualitas program serta meningkatkan peran partisipasi masyarakat sebagai kelompok sasaran penerima program CSR. Tujuan dari penelitian ini adalah mengukur tingkat kepuasan masyarakat terhadap program CSR yang telah dijalankan dan mengevaluasi dampak program CSR yang telah dilakukan. Adapun metode yang digunakan adalah  melalui pendekatan kajian input, output, outcome dan impact melalui analisis Indeks Kepuasan Masyarakat, Importance Performance Analysis, dan Compass Sustainability Analysis. Hasil penelitian menunjukkan secara keseluruhan kepuasan masyarakat terhadap pelayanan program CSR Badak LNG menunjukkan parameter sangat baik. Tingkat kesesuaian antara kepuasan kinerja dengan tingkat kepentingan masyarakat masuk dalam kategori sangat baik. Indikator kejelasan petugas pendamping,  tanggung jawab petugas pendamping, kemampuan petugas pendamping,  kesopanan petugas pendamping, dan kepastian biaya pelayanan adalah indikator yang memiliki harapan tinggi dari masyarakat penerima manfaat, dan perusahaan memiliki kinerja yang sangat baik dalam hal tersebut. Dampak positif yang diterima dari  kegiatan CSR pada dimensi nature, wellbeing, economy, social di Kota Bontang sangat tinggi, di antaranya terjadinya peningkatan kualitas lingkungan, pemanfaatan potensi alam, peningkatan pendapatan masyarakat, pengentasan kemiskinan, peningkatan kemandirian UMKM, semakin dikenalnya kebudayaan masyarakat, dan tingginya tingkat kepuasan masyarakat terhadap kegiatan-kegiatan CSR Badak LNG. The CSR program from Badak LNG has been involving the society in the planning, implementation, monitoring and evaluation process. It has an impact to the improvement quality program and increase peoples participation as a CSR awardee. This research aims to measure the peoples satisfactory towards CSR

  6. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI IMPOR KAPAS DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Ari Budi Basuki

    2017-06-01

    Full Text Available Penelitian ini bertujuan untuk menganalisis pengaruh produksi kapas domestik, konsumsi kapas, GDP riil dan kurs rupiah ke dollar AS terhadap impor kapas. Jenis penelitian ini adalah penelitian kuantitatif dengan data time series berdasarkan tahun 1980-2013. Data diperoleh dari Indexmundi, International Monetary Fund dan United Nations Conference on Trade and Development (UNSCAD. Hasil analisis Error Correction Model (ECM menunjukkan bahwa variabel produksi kapas domestik dalam jangka pendek dan jangka panjang tidak berpengaruh terhadap impor kapas, variabel konsumsi kapas dalam jangka pendek dan jangka panjang berpengaruh positif terhadap impor kapas, variabel GDP riil dalam jangka pendek dan jangka panjang tidak berpengaruh terhadap impor kapas, dan variabel kurs rupiah terhadap dollar dalam jangka pendek dan jangka panjang tidak berpengaruh terhadap impor kapas. Kesimpulan dari penelitian ini adalah faktor produksi kapas, GDP riil dan kurs dalam jangka pendek dan jangka panjang tidak berpengaruh terhadap impor kapas, namun dalam jangka pendek dan jangka panjang faktor konsumsi kapas mempengaruhi impor kapas. Saran yang berkaitan dengan hasil penelitian ini adalah Pemerintah perlu meningkatkan total produksi kapas dalam negeri dengan cara mengembangkan penelitian dan pembenihan kapas dalam negeri termasuk jenis transgenic. Pemerintah perlu mengurangi penggunaan kapas terutama dengan cara mensubtitusi kapas tersebut dengan kapas sintetis This study aimed to analyze the influence of domestic cotton production, cotton consumption, real GDP and the exchange rate rupiah to the US dollar against the import of cotton. This research is a quantitative study with time series data based on years of 1980-2013. Data obtained from Indexmundi, International Monetary Fund and the United Nations Conference on Trade and Development (UNSCAD. Results of analysis Error Correction Model (ECM shows that domestic cotton production variables in the short term and the

  7. Evaluasi Konsumen di "RM. Pak Kardi" Pemalang dengan Analisis Diskriminan

    Directory of Open Access Journals (Sweden)

    Tuis Susanto

    2017-02-01

    Full Text Available Penelitian ini bertujuan mengetahui apakah ada perbedaan yang siqnifikan dalam variabel dependen (Y yang meliputi konsumen sering Beli (YO, Cukup (Y I dan Jarang Beli (Y2, serta bertujuan mengetahui perilaku konsumen yang benar-benar berbeda, perbedaan dalam  arti perilaku   mereka  sering  membeli, cukup dan jarang membeli. Metode analisis  yang digunakan adalah dengan Wilk's Lambda, Pairwise, F test. Canonical  corellation,   untuk  mencari ada dan tidak perbedaan antar group variabel dependen dan  menginterpretasikan     berdasarkan function at group centroid untuk mengetahui variabel independen mana yang   menjadi  faktor diskriminannya. Hasil yang didapat dari penelitian ini adalah  bahwa  variabel  menu  merupakan faktor pembeda (diskriminan.  Artinya konsumen grup (sering  beli,  cukup  dan jarang   beli  tidak terpengaruh   dengan  usia,  harga,  pendapatan,   dan pelayanan  yang  diberikan oleh RM. Pak Kardi ditunjukkan dengan tanda (+ padafunction I. Jadi  konsumen  yang  membeli  di RM. Pak  Kardi adalah  mereka  yang  benar-benar   menyukai menu  (masakan  khas kepiting RM. Pak Kardi.  Jarak antara  grup  Sering  Beli  dengan grup  Jarang   Beli  adalah yang  terbesar, yakni 7,350. Sedangkan jarak   terkecil   adalah antara grup  Cukup  dengan  grup  Jarang   Beli  (0.522. Dengan demikian dapat  dikatakan   bahwa  Konsumen   di grup  Sering  Beli paling berbeda  selera  Menu  masakannya. Sebaliknya   Menu yang  disukai  oleh  konsumen di RM. Pak Kardi yang termasuk konsumen Cukup mempunyai perbedaan yang  kecil dengan  mereka  yang jarang membeli

  8. ANALISIS KANDUNGAN GARAM GUNUNG ASAL KRAYAN KABUPATEN NUNUKAN KALIMANTAN TIMUR

    Directory of Open Access Journals (Sweden)

    Herman Herman

    2012-06-01

    Full Text Available Has been studied composition of mountain salt from Krayan, Nunukan, East Kalimantan. This study aims to determine the composition of the minerals contained in the  mountain salt. Mountain salt is obtained from wells Krayan District residents were further prepared for analysis using a technique using Atomic Absorption Spectrometer (AAS, further by looking at the pattern of X-ray Diffraction (XRD and Scanning electron microscopic (SEM. Based on the results obtained AAS has identified mineral deposits include: Na, K, Mg, Al, Cu, Zn, Fe, Ba, and Sr. From the results of XRD shows that the main peak of the salt Krayan shows major peaks for NaCl crystals with impurities such as KCl, CaCl2, MgCl2, and AlCl3. SEM observation showed that morphology of Krayan salt have cube shape which is the shape of NaCl crystals with space group Fm3m and lattice parameter (a 5.620 Å Keywords : Mountain Salt, krayan, AAS, XRD, SEM   Abstrak Telah dilakukan penelitian analisis kandungan garam gunung asal Krayan Kabupaten Nunukan Kalimantan Timur. Penelitian ini bertujuan untuk mengetahui komposisi mineral yang terkandung dalam garam gunung. Garam gunung diperoleh dari sumur warga Kecamatan Krayan yang selanjutnya dipreparasi untuk dianalisis dengan menggunakan menggunakan teknik Spektrometer Serapan Atom (SSA, selanjutnya dengan melihat pola Difraksi Sinar X (XRD, dan Scanning Elektron Microscopy (SEM. Berdasarkan hasil SSA telah diidentifikasi diperoleh kandungan mineral antara lain: Na, K, Mg, Al, Cu,  Zn, Fe, Ba, dan Sr. Dari hasil XRD terlihat bahwa puncak utama dari  garam krayan tersebut menunjukkan puncak utama untuk Kristal NaCl, dengan impurities antara lain KCl, CaCl2, MgCl2, dan AlCl3. Selain itu hal ini didukung pula oleh pengamatan SEM, bahwa morfologi SEM garam krayan memperlihatkan bentuk kristal kubus yang merupakan  bentuk dari  Kristal NaCl  dengan  grup ruang  Fm3m  dengan panjang  kisi kristal 5,620 Å. Kata Kunci : Garam Gunung, Krayan

  9. ANALISIS KELAYAKAN INVESTASI PENAMBAHAN MESIN FRAIS BARU PADA CV. XYZ

    Directory of Open Access Journals (Sweden)

    Febri Muhammad Rachadian

    2013-04-01

    Full Text Available Perkembangan teknologi sangat pesat sehingga dunia perindustrian harus mengikuti perkembangannya. Penerapan teknologi diharapkan dapat meningkatkan proses produksi sehingga dapat menghasilkan produk yang berkualitas. Pada industri pembuatan mesin cetak di CV XYZ, mesin-mesin yang digunakan telah hampir lebih dari 20 tahun. Ada indikasi bahwa mesin-mesin tersebut sudah lewat umur pakainya. Alternatif yang digunakan selama ini ialah penggantian komponen yang rusak. Peneliti ingin membandingkan alternative tersebut dengan  penambahan mesin frais baru. Untuk itu diperlukan analisis kelayakan investasi penambahan mesin baru. Dalam perkiraan kurun waktu 10 tahun dan suku bunganya 15 % dengan menggunakan NPV, penambahan mesin frais menarik sebesar Rp 461.201.000 dibandingkan penggantian komponen yang rusak sebesar Rp 211.227.000. Sebaliknya pada PBP, penggantian komponen yang rusak masih mengungguli dengan 1 tahun 4 bulan dibandingkan penambahan mesin frais baru selama 2 tahun 1 bulan. Begitupun juga PI penggantian komponen yang rusak masih menarik sebesar 4,2 dibandingkan PI penambahan mesin frais baru sebesar 2,56. Dapat disimpulkan bahwa dalam jangka waktu 10 tahun, alternatif penggantian komponen yang rusak masih lebih baik dibandingkan penambahan mesin frais baru. Namun, untuk investasi jangka panjang, mungkin saja alternatif penambahan mesin frais baru lebih menarik. Kata Kunci: penggantian komponen rusak, mesin frais baru, mesin cetak Abstract The rapid development of technology makes the world of industry must follow its development. Application of technology is expected to improve the production process so it can be produce a quality product. On the industrial manufacture of printing machines in CV XYZ, the machines have been used almost more than 20 years. There are indications that those machines passed the age lifetime. The alternatives that have been used during this time are the replacement of defective parts. Researchers wanted to

  10. Consistent Valuation across Curves Using Pricing Kernels

    Directory of Open Access Journals (Sweden)

    Andrea Macrina

    2018-03-01

    Full Text Available The general problem of asset pricing when the discount rate differs from the rate at which an asset’s cash flows accrue is considered. A pricing kernel framework is used to model an economy that is segmented into distinct markets, each identified by a yield curve having its own market, credit and liquidity risk characteristics. The proposed framework precludes arbitrage within each market, while the definition of a curve-conversion factor process links all markets in a consistent arbitrage-free manner. A pricing formula is then derived, referred to as the across-curve pricing formula, which enables consistent valuation and hedging of financial instruments across curves (and markets. As a natural application, a consistent multi-curve framework is formulated for emerging and developed inter-bank swap markets, which highlights an important dual feature of the curve-conversion factor process. Given this multi-curve framework, existing multi-curve approaches based on HJM and rational pricing kernel models are recovered, reviewed and generalised and single-curve models extended. In another application, inflation-linked, currency-based and fixed-income hybrid securities are shown to be consistently valued using the across-curve valuation method.

  11. Construction of calibration curve for accountancy tank

    International Nuclear Information System (INIS)

    Kato, Takayuki; Goto, Yoshiki; Nidaira, Kazuo

    2009-01-01

    Tanks are equipped in a reprocessing plant for accounting solution of nuclear material. The careful measurement of volume in tanks is very important to implement rigorous accounting of nuclear material. The calibration curve relating the volume and level of solution needs to be constructed, where the level is determined by differential pressure of dip tubes. Several calibration curves are usually employed, but it's not explicitly decided how many segment are used, where to select segment, or what should be the degree of polynomial curve. These parameters, i.e., segment and degree of polynomial curve are mutually interrelated to give the better performance of calibration curve. Here we present the construction technique of giving optimum calibration curves and their characteristics. (author)

  12. MICA: Multiple interval-based curve alignment

    Science.gov (United States)

    Mann, Martin; Kahle, Hans-Peter; Beck, Matthias; Bender, Bela Johannes; Spiecker, Heinrich; Backofen, Rolf

    2018-01-01

    MICA enables the automatic synchronization of discrete data curves. To this end, characteristic points of the curves' shapes are identified. These landmarks are used within a heuristic curve registration approach to align profile pairs by mapping similar characteristics onto each other. In combination with a progressive alignment scheme, this enables the computation of multiple curve alignments. Multiple curve alignments are needed to derive meaningful representative consensus data of measured time or data series. MICA was already successfully applied to generate representative profiles of tree growth data based on intra-annual wood density profiles or cell formation data. The MICA package provides a command-line and graphical user interface. The R interface enables the direct embedding of multiple curve alignment computation into larger analyses pipelines. Source code, binaries and documentation are freely available at https://github.com/BackofenLab/MICA

  13. Inverse Diffusion Curves Using Shape Optimization.

    Science.gov (United States)

    Zhao, Shuang; Durand, Fredo; Zheng, Changxi

    2018-07-01

    The inverse diffusion curve problem focuses on automatic creation of diffusion curve images that resemble user provided color fields. This problem is challenging since the 1D curves have a nonlinear and global impact on resulting color fields via a partial differential equation (PDE). We introduce a new approach complementary to previous methods by optimizing curve geometry. In particular, we propose a novel iterative algorithm based on the theory of shape derivatives. The resulting diffusion curves are clean and well-shaped, and the final image closely approximates the input. Our method provides a user-controlled parameter to regularize curve complexity, and generalizes to handle input color fields represented in a variety of formats.

  14. Text Mining Untuk Analisis Sentimen Review Film Menggunakan Algoritma K-Means

    Directory of Open Access Journals (Sweden)

    Setyo Budi

    2017-02-01

    Full Text Available Kemudahan manusia didalam menggunakan website mengakibatkan bertambahnya dokumen teks yang berupa pendapat dan informasi. Dalam waktu yang lama dokumen teks akan bertambah besar. Text mining merupakan salah satu teknik yang digunakan untuk menggali kumpulan dokumen text sehingga dapat diambil intisarinya. Ada beberapa algoritma yang di gunakan untuk penggalian dokumen untuk analisis sentimen, salah satunya adalah K-Means. Didalam penelitian ini algoritma yang digunakan adalah K-Means. Hasil penelitian menunjukkan bahwa akurasi K-Means dengan dataset digunakan 300 positif dan 300 negatif  akurasinya 57.83%,  700 dokumen positif dan 700  negatif akurasinya 56.71%%, 1000 dokumen positif dan 1000  negatif akurasinya 50.40%%. Dari hasil pengujian disimpulkan bahwa semakin besar dataset yang digunakan semakin rendah akurasi K-Means.   Kata Kunci : Text Mining, Analisis Sentimen, K-Means, Review Film 

  15. Deteksi Kerusakan Batang Rotor Pada Motor Induksi Menggunakan Analisis Arus Mula Berbasis Hilbert Transform

    Directory of Open Access Journals (Sweden)

    Isti Qomah

    2017-01-01

    Full Text Available Kerusakan batang rotor merupakan salah satu jenis kerusakan pada motor induksi yang dapat menyebabkan masalah serius. Kerusakan tersebut dapat mencapai 5% - 10% dari seluruh kasus gangguan motor induksi. Oleh karena itu, perlu adanya diagnosis awal yang mendeteksi adanya gangguan pada rotor motor induksi, agar dapat dilakukan perbaikan lebih cepat dan tanggap sebelum terjadi gangguan yang lebih besar. Tugas Akhir ini membahas terkait teknik deteksi kerusakan batang rotor pada motor induksi dengan menggunakan analisis arus mula. Sistem yang digunakan berbasis  decomposition wavelet transform terlebih dahulu kemudian dilanjutkan dengan analisis berbasis hilbert transform sebagai perangkat pengolahan sinyal sehingga mampu mendeteksi motor dalam keadaan sehat atau mengalami kerusakan. Pengujian sistem dilakukan dalam beberapa kondisi, yaitu kondisi tanpa beban dan berbeban. Selain itu, kondisi yang diberikan adalah kecacatan mulai dai 1BRB hingga 3BRB. Hasil pengujian membuktikan bahwa decomposition wavelet transform dan Hilbert transform mampu mendeteksi perbedaan kondisi pada motor induksi normal ataupun rusak pada batang rotor.

  16. Analisis Nilai Perusahaan pada Implementasi Program Kepemilikan Saham pada Karyawan/Manajemen

    Directory of Open Access Journals (Sweden)

    Dwitya Aribawa

    2016-12-01

      Penelitian ini bertujuan menganalisis economic value added (EVA sebelum dan sesudah implementasi program kepemilikan saham pada karyawan/ manajemen dengan objek penelitian ini adalah perusahaan publik yang menggunakan kebijakan ESOP/MSOP sebagai sarana benefit/incentive berupa pembagian sebagian saham untuk karyawan/ manajemen. Variabel yang digunakan sebagai indikator nilai perusahaan adalah EVA. Nilai EVA dianggap sebagai indikator yang kompleks dan mempertimbangkan faktor resiko (beta dari perusahaan. Perusahaan yang dianalisis adalah perusahaan yang listing di Bursa Efek Indonesia. Terdapat 17 perusahaan yang layak untuk dilakukan analisis berdasarkan kriteria yang ditentukan peneliti. Pengumpulan dan data dianalisis secara pooling, hal ini melihat dari tidak dibedakannya perusahaan berdasarkan industri (multi industri. Paired sample test digunakan untuk menguji hipotesis pada penelitian dan sebelumnya dilakukan uji normalitas data. Hasil analisis bahwa hasil perbandingan rata-rata EVA sebelum dan sesudah implementasi program kepemilikan saham pada karyawan/manajemen terdapat perbedaan yag signifikan.

  17. Voltage stability analysis considering the load dynamic characteristics and the voltage control devices; Analisis de estabilidad de voltaje considerando las caracteristicas dinamicas de la carga y dispositivos de control de voltaje

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Alvarez, Enrique

    2001-09-15

    improvement of the voltage stability. Finally, the application of the proposed methods of study to the analysis of voltage stability in an electrical network derived from the Mexican Peninsular system is presented. The influence of voltage control devices in the stability phenomenon is discussed and a comparison with the results obtained by means of other analysis techniques are presented, specifically, the study of the Q-V curves and the modal analysis of the power flow equations. [Spanish] El trabajo de investigacion que se presenta en esta tesis se centra en el analisis de la estabilidad de voltaje de mediano plazo considerando el efecto de las caracteristicas de la carga y su interaccion con los modelos de dispositivos de control de voltaje en la red de transmision. Mas concretamente, se define y estudia un tipo de modelo de carga con caracteristicas deseables para el estudio de la estabilidad de voltaje; los modelos genericos de carga derivados de pruebas de campo o de la aplicacion de tecnicas de identificacion y se analiza la influencia de la aplicacion de dispositivos de control para mejorar los margenes de estabilidad del sistema. Se estudian, asimismo, alternativas al modelado de sistemas de potencia para el estudio de la estabilidad de voltaje en sistemas complejos. Se presenta, en primer lugar, un analisis fundamental de las caracteristicas de estabilidad de voltaje en un sistema simplificado de potencia y se introduce el metodo de analisis adoptado. Se muestra que el fenomeno de inestabilidad se manifiesta como una bifurcacion tipo singular inducida del modo critico de voltaje cuando se opera el sistema bajo condiciones de estres. A continuacion, se analiza la contribucion de la accion de dispositivos de control al margen de estabilidad y se deducen criterios de analisis de estabilidad basados en el estudio de dicho modo. Se propone, a continuacion, un modelo lineal del sistema de potencia con caracteristicas deseables para el estudio de la estabilidad de voltaje

  18. String Sigma Models on Curved Supermanifolds

    Directory of Open Access Journals (Sweden)

    Roberto Catenacci

    2018-04-01

    Full Text Available We use the techniques of integral forms to analyze the easiest example of two-dimensional sigma models on a supermanifold. We write the action as an integral of a top integral form over a D = 2 supermanifold, and we show how to interpolate between different superspace actions. Then, we consider curved supermanifolds, and we show that the definitions used for flat supermanifolds can also be used for curved supermanifolds. We prove it by first considering the case of a curved rigid supermanifold and then the case of a generic curved supermanifold described by a single superfield E.

  19. Regional Marginal Abatement Cost Curves for NOx

    Data.gov (United States)

    U.S. Environmental Protection Agency — Data underlying the figures included in the manuscript "Marginal abatement cost curve for NOx incorporating controls, renewable electricity, energy efficiency and...

  20. ANALISIS STRUKTUR AKTANSIAL DAN FUNGSIONAL DALAM VOYAGE AUCENTREDELA TERRE KARYA JULES VERNE

    OpenAIRE

    Ade Yolanda Latjuba, Dr. M.A

    2017-01-01

    Berdasarkan hasil analisis, maka dapat disimpulkan sebagai berikut: 1. Roman Voyage au centre de la terre menceritakan tentang Prof. Lidenbrock, Axel, dan Hans Bjelke melakukan perjalanan luar biasa menuju pusat bumi berdasarkan petunjuk dari Ame Saknussemm yang Axel dan si Professor dapatkan secara tidak sengaja terselip di dalam sebuah buku tua karya Snorre Tarlesson. 2. Prof. Lidenbrock, Axel dan Hans Bjelke memulai perjalanan mereka menuju pusat bumi dengan cara menuruni gunung bera...

  1. Analisis Pengaruh Konsentrasi Gas LPG Menggunakan Sensor TGS 2610 Berbasis Mikrokontroler AVR ATMega8535

    OpenAIRE

    Nurhalimah

    2011-01-01

    Telah dilakukan analisis kuantitatif gas dalam LPG. Penelitian ini dilakukan untuk mengukur konsentrasi gas LPG terhadap sensor. Metoda yang digunakan untuk mengukur konsentrasi gas LPG yaitu sensor gas semikonduktor jenis TGS 2610 keluaran Figaro yang digunakan untuk mendeteksi keberadaan gas. Sementara yang menjadi pusat pengendalian dari seluruh alat yang dirancang digunakan mikrokontroler AVR ATMega8535. Selain itu sistem yang dirancang dilengkapi LCD sebagai tampilan nilai konsentrasi ga...

  2. ANALISIS SEGMENTASI PASAR PRODUK YOGHURT BERDASARKAN PERILAKU KONSUMEN PADA HYPERMART CABANG PANAKUKANG, MAKASSAR

    OpenAIRE

    -, ANDRIANI

    2014-01-01

    2014 v ABSTRAK Andriani. I311 04 049. Analisis Segmentasi Pasar Berdasarkan Perilaku Konsumen pada Hypermart Cabang Panakukang, Makassar. Dibawah Bimbingan Ir. Hastang, M.Si sebagai Pembimbing Utama dan Muh. Ridwan, S.Pt, M.Si. sebagai Pembimbing Anggota. Perkembangan dan peningkatan bisnis khususnya pada usaha peternakan akhir-akhir ini menunjukkan banyak peningkatan. Salah satu strategi yang dapat diterapkan dalam menunjang aktivitas pemasaran oleh perusahaan dalam memasarkan pr...

  3. ANALISIS STRUKTUR MIKRO LAPISAN BOND COAT NIAL THERMAL BARRIER COATING (TBC PADA PADUAN LOGAM BERBASIS CO

    Directory of Open Access Journals (Sweden)

    Toto Sudiro

    2012-11-01

    Full Text Available Kehandalan dan umur pakai sistem Thermal Barrier Coating (TBC ditentukan oleh kestabilan lapisan bond coat dan thermal grown oxide (TGO. Sehingga sangatlah penting untuk memahami mekanisme pembentukan dan degradasi lapisan ini. Pada makalah ini akan dibahas analisis struktur mikro lapisan bond coat NiAl yang dideposisikan pada substrat CoCrNi dengan menggunakan gabungan metoda electroplating dan pack-cementation. Pada makalah ini juga dibahas mekanisme pembentukan void disepanjang interface bond coat¬-substrat setelah tes oksidasi.

  4. Analisis Algoritma Pergantian Cache Pada Proxy Web Server Internet Dengan Simulasi

    OpenAIRE

    Nurwarsito, Heru

    2007-01-01

    Pertumbuhan jumlah client internet dari waktu ke waktu terus bertambah, maka respon akses internet menjadi semakin lambat. Untuk membantu kecepatan akses tersebut maka diperlukan cache pada Proxy Server. Penelitian ini bertujuan untuk menganalisis performansi Proxy Server pada Jaringan Internet terhadap penggunaan algoritma pergantian cache-nya.Analisis Algoritma Pergantian Cache Pada Proxy Server didesain dengan metoda pemodelan simulasi jaringan internet yang terdiri dari Web server, Proxy ...

  5. Analisis Peranan Franchisor Terhadap Suksesnya Bisnis Franchise Pada Mc. Donald’s Cabang Ring Road Medan

    OpenAIRE

    Simarmata, Leonardo

    2012-01-01

    Tujuan penelitian ini adalah untuk mengetahui dan menganalisis peranan franchisor dalam promotion, support service, training, control system dan communication terhadap suksesnya bisnis franchise pada Mc Donald’s Cabang Ring Road Medan. Pengumpulan data primer diperoleh dengan cara memberikan daftar pertanyaan (questionaire) dan melakukan wawancara (interview) secara mendalam (depth interview) kepada pemilik usaha M. Donald’s Cabang Ring Road Medan. Teknik analisis data penelitian ini ad...

  6. Analisis Kelembagaan Rantai Pasok Telur Ayam Ras Peternakan Rakyat Di Jawa Barat

    OpenAIRE

    Sejati, Wahyuning K

    2011-01-01

    Dalam konteks pengembangan pasar komoditas dan peningkatan kesejahteraan peternak rakyat perlu dipahami secara baik karakteristik dan kelembagaan petani, pemasok, dan pasar. Tulisan ini bertujuan untuk menganalisis kelembagaan rantai pasok peternak-pemasok-pasar komoditas telur ayam ras yang meliputi: (1) identifikasi kelembagaan peternakan rakyat ayam ras petelur; (2) analisis kelembagaan rantai pasok komoditas telur; dan (3) antisipasi kelembagaan introduksi rantai pasok telur ayam ras pete...

  7. ANALISIS PERILAKU PENYUSUN ANGGARAN DALAM PERSPEKTIF KEAGENAN PADA KABUPATEN DAN KOTA DI PROVINSI SULAWESI SELATAN

    OpenAIRE

    ILMI, A. NURUL

    2016-01-01

    2016 Analisis Perilaku Penyusun Anggaran dalam Perspektif Keagenan pada Kabupaten dan Kota di Provinsi Sulawesi Selatan Analysis of Budget Compiler???s Behavior within the Agency Perspective in Regency and City of South Sulawesi Province A. Nurul Ilmi Mediaty Aini Indrijawati Penelitian ini bertujuan untuk menganalisis pengaruh perubahan Pendapatan Asli Daerah dan perubahan Dana Perimbangan terhadap perilaku oportunistik penyusun anggaran yang menjelaskan mengenai hubungan k...

  8. Correlacion entre metodos de analisis de Zn disponible en cuatro ordenes de suelos de Costa Rica

    OpenAIRE

    Eloy Molina; Elemer Bornemisza

    2001-01-01

    Se realizo una comparación entre métodos analisis del Zn disponible en 4 ordenes de sue- Analytilos de Costa Rica (Ultisoles, Vertisoles, Andisoles Inceptisoles, 25 de c/u), utilizando las siguientes soluciones extractoras: Olsen Modificado, Meh- lich 3, Morgan Modificado, DTPA y HC1. Las cantidades de Zn extrafdas dependieron de la natu- raleza qufmica de la solucion extractora. El HCl presento los contenidos mas altos de Zn en los chasuelos, excepto en Vertisoles....

  9. Analisi Pengaruh Store Name, Brand Name, Dan Price Discounts Terhadap Purchase Intentions Konsumen Infinite Tunjungan Plaza

    OpenAIRE

    Gunawan, Andy

    2013-01-01

    Andy Gunawan:SkripsiAnalisis pengaruh store name, brand name dan price discounts terhadap purchase intention konsumen infnite tunjungan plaza Di era globalisasi ini, persaingan dagang antara Perusahaan – Perusahaan baik lokal maupun global menjadi semakin ketat, oleh karena itu Perusahaan selalu berusaha untuk meningkatkan ketertarikan minat beli konsumen. Beberapa variabel yang menjadi fokus Perusahaan adalah store name, brand name, dan price discount. Tujuan penelitian ini adalah untuk meng...

  10. KERAGAAN WARNA IKAN CLOWN BIAK (Amphiprion percula) POPULASI ALAM DAN BUDIDAYA BERDASARKAN ANALISIS GAMBAR DIGITAL

    OpenAIRE

    Ruby Vidia Kusumah; Sawung Cindelaras; Anjang Bangun Prasetio

    2015-01-01

    Penelitian ini bertujuan untuk mengkaji keragaan warna ikan clown Biak (Amphiprion percula) populasi alam dan budidaya berdasarkan analisis gambar digital sebagai dasar upaya pemuliaannya. Gambar digital diambil dari koleksi ikan clown Biak Balai Besar Perikanan Budidaya Laut Lampung, Balai Besar Penelitian dan Pengembangan Budidaya Laut Gondol, Bali; serta pengumpul ikan hias di Denpasar, Bali menggunakan kamera digital Canon EOS 600D. Pola warna dikarakterisasi secara visual terhadap varias...

  11. ANALISIS RESIDU PESTISIDA PIRETRIN DALAM TOMAT DAN SELADA DARI BEBERAPA PASAR DI JAKARTA

    Directory of Open Access Journals (Sweden)

    D. Mutiatikum

    2012-10-01

    Full Text Available Penggunaan pestisida untuk budidaya komoditi pertanian memungkinkan adanya residu pestisida dalam sayuran sehingga konsumen berisiko tercemar pestisida yang merupakan zat toksik  sehingga diperlukan pemantmwn kadar residu dalam sayuran terutama yang langsung dikonsumsi tanpa dimasak. Penetapan  residu pestisida dilakukan dengan menggunakan kromatografi gas (GC. Hasil analisis residu pestisida golongan peretrin dalam tomat dan selada yang disampling dari pasar induk, pasar tradisional. pasar swalayan dan hipermarket yang berada diwilayah Jakarta menunjukkan hasil yang negatif (tidak terdeteksi.

  12. PESAN MORAL DALAM FILM TO KILL A MOCKINGBIRD (ANALISIS SEMIOTIKA PADA FILM TO KILL A MOCKINGBIRD

    OpenAIRE

    RENYOET, JAQUILINE MELISSA

    2014-01-01

    2014 JAQUILINE MELISSA RENYOET. Pesan Moral Dalam Film To Kill A Mockingbird (Analisis Semiotika Pada Film To Kill A Mockingbird). (Dibimbing oleh Muh. Nadjib dan Alem Febri Sonni). Tujuan Penelitian ini adalah mengidentifikasi bentuk pesan moral dan memahami makna pesan moral dalam film To Kill A Mockingbird. Penelitian ini dilakukan selama kurang lebih 2 bulan yaitu Maret ??? Mei 2014. Metode yang digunakan untuk penelitian ini adalah metode penelitian kualitatif den...

  13. ANALISIS PENERAPAN TAX PLANNING ATAS PAJAK PENGHASILAN BADAN PADA PT SEMEN TONASA PANGKEP

    OpenAIRE

    WIJAYA, AKBAR

    2014-01-01

    2014 ABSTRAK ANALISIS PENERAPAN TAX PLANNING ATAS PAJAK PENGHASILAN BADAN PADA PT SEMEN TONASA PANGKEP Implementation Analysis of Tax Planning on Board Incoming Tax of Semen Tonasa Ltd. Pangkep Akbar Wijaya Amiruddin Darmawati Penelitian ini bertujuan untuk mengetahui tax planning yang dilakukan oleh PT Semen Tonasa Pangkep, dan untuk menganalisis penerapan tax planning yang dilakukan oleh PT Semen Tonasa Pangkep dengan undang-undang perpajakan yang berlaku. Data...

  14. Analisis “Brand Equity” Siaran Berita Stasiun Televisi Swasta Indonesia

    OpenAIRE

    Arif Sugiono; Prima Mulyasari Agustina

    2004-01-01

    Penelitian ini bertujuan untuk mengetahui keadaan berbagai merek siaran berita stasiun televisi swasta berdasarkan dimensi ekuitas mereknya, dengan memfokuskan pada empat dimensi ekuitas merek, yang meliputi loyalitas merek, kesadaran merek, persepsi kualitas, dan asosiasi merek. Metode yang digunakan metode deskriptif, dengan analisis data menggunakan tabulasi dan teknik skala. Hasil penelitian dari dimensi loyalitas merek tiga besar siaran berita secara berurutan adalah Buser, Patroli dan L...

  15. Analisis Biaya, Volume, Laba sebagai Alat Bantu Perencanaan Laba pada Hotel Sedona Manado

    OpenAIRE

    Samahati, Ricky Budiman

    2013-01-01

    Manado sebagai kota pariwisata menyediakan sarana dan prasarana kepariwisataan termasuk jasa perhotelan. Hotel Sedona merupakan salah satu hotel yang ada di Kota Manado dan merupakan objek yang dipilih penulis dengan menggunakan data operasional penjualan yang terjadi pada tahun 2011 dan 2012. Tujuan penelitian ini yaitu untuk mengetahui titik break even point, jumlah volume penjualan pada tingkat laba yang direncanakan, serta tingkat margin of safety pada Hotel Sedona Manado. Metode analisi...

  16. Text Mining Untuk Analisis Sentimen Review Film Menggunakan Algoritma K-Means

    OpenAIRE

    Setyo Budi

    2017-01-01

    Kemudahan manusia didalam menggunakan website mengakibatkan bertambahnya dokumen teks yang berupa pendapat dan informasi. Dalam waktu yang lama dokumen teks akan bertambah besar. Text mining merupakan salah satu teknik yang digunakan untuk menggali kumpulan dokumen text sehingga dapat diambil intisarinya. Ada beberapa algoritma yang di gunakan untuk penggalian dokumen untuk analisis sentimen, salah satunya adalah K-Means. Didalam penelitian ini algoritma yang digunakan adalah K-Means. Hasil p...

  17. ANALISIS DEKONSTRUKSI TOKOH TAKESHI DAN MITSUSABURO DALAM NOVEL SILENT CRY KARYA KENZABURO OE PERSPEKTIF JACQUES DERRIDA

    Directory of Open Access Journals (Sweden)

    Abd. Ghofur

    2015-12-01

    Full Text Available This article is a little result done by the writer, in which critical analisys discourse study as a tool to learn literature. It is Kenzaburo Oe’s writing, a Japan writer who got Pulitzer or noble in literature. It employs Jaques Derrida deconstructive theory, while the researcher focuses on binary opposition.  When deconstruction used, it will expose inside of the text, furthermore it produces other meaning or different point of view from the real text.

  18. Analisis Juridis Pelaksanaan Penghapusan Piutang Terhadap Kredit Macet (Studi Pada PT. Bank Sumut)

    OpenAIRE

    Margareth Eka Purba

    2009-01-01

    Usaha pokok Bank adalah sektor perkreditan dan pendapatan bank yang terbesar adalah berasal dari sektor perkreditan. Kredit, baik konsumtif maupun produktif memang sudah mejadi target utama perbankan dalam meraih pendapatan, selain fee based income tentunya. Dengan demikian, kelebihan dana masyarakat yang bisa membuat bank memiliki dana idle yang akan lebih produktif lagi karena diberikan dalam bentuk kredit.Walaupun sudah dilakukan analisis kredit, dan kredit sudah dinyatakan layak untuk dib...

  19. ANALISIS POTENSI PEMUNGUTAN PAJAK HOTEL DALAM RANGKA PENINGKATAN PENDAPATAN ASLI DAERAH KOTA MAKASSAR

    OpenAIRE

    -, MUHAMMAD TRY DHARSANA AMBO ALA DEPARTEMEN AKUNTANSI FAKULTAS EKONOMI DAN BISNIS UNIVERSITAS HASANUDDIN MAKASSAR 2017

    2017-01-01

    Analisis Potensi Pemungutan Pajak Hotel dalam Rangka Peningkatan Pendapatan Asli Daerah Kota Makassar Analysis of Hotels Tax Collection Potency in Makkasar???s Own-Source Revenue Increase Muhammad Try Dharsana Ambo Ala Andi Kusumawati Yulianus Sampe Tujuan penelitian ini adalah untuk mengetahui besar potensi pajak hotel dan seberapa jauh bentuk usaha yang di lakukan oleh pemerintah daerah dalam menggali potensi pajak hotel di kota Makassar. Untuk menghitung potensi, efektivi...

  20. Analisis Model Penelusuran Backward Chaining dalam Mendeteksi Tingkat Kecanduan Game pada Anak

    Directory of Open Access Journals (Sweden)

    Anastasya Latubessy

    2017-10-01

    Full Text Available Game addiction rate can be detected by applying expert system. This study developed a model of game addiction analysis using backward chaining. This model uses six types of game addiction behavior, among others, salience, euphoria, conflict, tolerance, withdrawal, relapse and reinstatement. Someone is said to be addicted to the game if it meets at least three types of game addiction behavior. Testing the validity of the model is done by testing the closeness of the agreement between the model analysis and expert analysis, resulting in a value of 0.78 which means having a strong agreement. Tingkat kecanduan game dapat dideteksi dengan mengaplikasikan sistem pakar. Penelitian ini mengembangkan model analisis tingkat kecanduan game menggunakan backward chaining. Model ini menggunakan enam jenis perilaku kecanduan game antara lain, salience, euphoria, conflict, tolerance, withdrawal, relapse dan reinstatement. Seseorang dikatakan kecanduan game jika memenuhi paling sedikit tiga jenis perilaku kecanduan game. Pengujian validitas model dilakukan dengan menguji keeratan kesepakatan antara analisis model dan analisis pakar, menghasilkan nilai 0,78 yang berarti memiliki keeratan kesepakatan kuat.

  1. Analisis Tata Kelola Teknologi Informasi Menggunakan Kerangka Kerja COBIT 4.1 pada Fakultas Teknik Undip

    Directory of Open Access Journals (Sweden)

    Arini Arumana

    2014-06-01

    Full Text Available Peran teknologi informasi dalam suatu instansi sudah tidak dapat dielakkan lagi, mengingat perkembangannya yang begitu pesat seiring berjalannya waktu. Namun masalah yang sering terjadi di instansi adalah penggunaan teknologi informasi yang kadang tidak sesuai dengan harapan. Oleh karena itu diperlukan tata kelola terhadap penggunaan teknologi informasi yang biasa disebut dengan IT Governance. Fakultas teknik UNDIP adalah salah satu fakultas yang dalam operasionalnya sangat mengandalkan teknologi informasi, baik dalam aktifitas belajar mengajar maupun dalam menjalankan operasional bisnis. Kondisi sekarang di Fakultas Teknik sendiri tidak terdapat suatu indikator yang dapat menyatakan bahwa kinerja TI yang berjalan telah sesuai dengan visi dan misi Fakultas Teknik, oleh karena itu perlu dilakukan analisis tata kelola teknologi informasi, guna mengetahui performa TI sekarang sesuai dengan yang diharapkan oleh managemen atau tidak. Hasil dari analisis ini berupa tingkat kematangan tata kelola TI yang mecerminkan kondisi tata kelola TI di Fakultas Teknik dengan mengacu pada maturity level yang disediakan kerangka kerja COBIT 4.1, yakni dari level 0 (non-existent sampai 5 (optimized. Berdasarkan analisis yang dilakukan, secara garis besar kondisi kematangan tata kelola TI Fakultas Teknik berada pada level 2 yakni repeatable but intuitive. Kondisi ini mengacu pada beberapa kelemahan dalam proses-proses TI yang berjalan, diantaranya penetapan dan dokumentasi tindakan, kebijakan dan prosedur yang minim, serta tidak tersedianya service level yang disetujui bersama.

  2. ANALISIS TINGKAT KAPABILITAS SISTEM INFORMASI RUMAH SAKIT BERDASARKAN COBIT 5 (MEA01 PADA RSUD TUGUREJO SEMARANG

    Directory of Open Access Journals (Sweden)

    Ariel Bagus Nugroho

    2015-11-01

    Full Text Available RSUD Tugurejo Semarang merupakan Rumah Sakit kelas B milik pemerintah Provinsi Jawa Tengah yang menyediakan pelayanan jasa untuk masyarakat. Dalam manajemen pengolahan data, RSUD Tugurejo Semarang telah menggunakan sistem informasi rumah sakit. Untuk mengetahui apakah sistem informasi telah berjalan seperti yang diharapkan, maka perlu dilakukan analisis tatakelola teknologi informasi. Pada penelitian ini analisis tatakelola teknologi informasi berfokus pada proses pengawasan, evaluasi dan penilaian kinerja, dan kesesuaian kinerja teknologi informasi, yaitu domain MEA01 pada framework COBIT 5.Tujuan penelitian ini untuk mengetahui tingkat kapabilitas dan strategi perbaikan untuk proses pengawasan, evaluasi dan penilaian kinerja dan kesesuaian TI. Metode pengumpulan  data penelitian ini dengan menggunakan studi dokumen, kuesioner dan wawancara kemudian dianalisis tingkat kapabilitas dan kesenjangan. Tingkat kapabilitas yang didapat dari hasil penelitian yaitu berada level 2 (managed. Untuk menaikkan tingkat kapabilitas pada level 3 maka maka perlu dilakukan secara bertahap strategi perbaikan pada PA 2.1, PA2.2, PA 3.1, dan 3.2. Kata kunci: Analisis Tata Kelola TI, COBIT 5, MEA01, Tingkat Kapabilitas, Rumah Sakit.

  3. Analisis Pengaruh Display Interior Terhadap Perilaku Pembelian Impulsif Konsumen Indomaret Pontianak

    Directory of Open Access Journals (Sweden)

    Ana Fitriana

    2016-07-01

    Full Text Available Pembelian impulsif adalah kecenderungan membeli produk atau jasa dengan tidak terencana, selanjutnya ketika pembelian sering tidak terencana, maka umumnya konsumen membeli produk atau jasa yang tidak terdaftar dalam daftar belanja. Sejalan dengan tujuan pemasar, pembelian tidak terencana ini berdampak sangat positif bagi pihak perusahaan. Salah satu perilaku konsumen yang sangat penting adalah perilaku belanja impulsif. Penelitian ini bertujuan untuk mengetahui pengaruh display interior pada Indomaret Pontianak terhadap impulsive buying konsumennya. Metode penelitian yang digunakan adalah penelitian kuantitatif. Populasi penelitian ini adalah konsumen Indomaret Pontianak, sebanyak 100 responden dipilih secara accidental sampling sebagai sampel penelitian. Metode pengumpulan data yang digunakan adalah metode pengumpulan data primer dengan teknik pengumpulan data kuesioner. Teknik analisis data yang digunakan adalah uji validitas dan reliabilitas, analisis koefisien determinasi, analisis regresi berganda dan uji hipotesis.Hasil perhitungan data menggunakan SPSS for windows ver 16 menunjukan secara simultan pengaruh display interior terhadap impulsive buying diketahui berpengaruh sebesar 61,31%. Sedangkan 38,69% dipengaruhi oleh faktor lain yang tidak diteliti didalam penelitian ini. Secara parsial tiga variabel bebas yaitu pengadaan barang, pengelompokan barang, dan penyusunan barang dan pencahayaan mempunyai pengaruh signifikan terhadap Impulsive buying.   Kata kunci — Pengadaan barang, Pengelompokan barang, Penyusunan barang dan pencahayaan, Perilaku Pembelian Impulsif

  4. Risk analysis in the chemical industry; Analisis de riesgos en la industria quimica

    Energy Technology Data Exchange (ETDEWEB)

    Rea Soto, Rogelio; Sandoval Valenzuela, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    2000-07-01

    The Instituto de Investigaciones Electricas has a group of risk analysis (GAR), specialized in the most advanced methodologies to apply them in diverse industries of the productive sector, such as the nuclear, the oil and the chemical industries. In this work the integrated methodology that the GAR uses to make risk analysis in the chemical and oil industries is described. These analyses have as an objective to make a meticulous evaluation of the system design, the operation practices, the maintenance and inspection policies and the emergency plans. [Spanish] El Instituto de Investigaciones Electricas cuenta con un grupo de analisis de riesgo (GAR), especializado en las metodologias mas avanzadas para aplicarlas en diversas industrias del sector productivo, como lo son la nuclear, la petrolera y la quimica. En este trabajo se describe la metodologia integrada que el GAR utiliza para realizar analisis de riesgos en las industrias quimica y petrolera. Estos analisis tienen como objetivo realizar una minuciosa evaluacion del diseno del sistema, las practicas de operacion, las politicas de mantenimiento e inspeccion y los planes de emergencia.

  5. PENGGUNAAN METODE STRUCTURAL EQUATION MODELLING UNTUK ANALISIS FAKTOR YANG MEMPENGARUHI MOTIVASI BELAJAR MAHASISWA FIP UMJ

    Directory of Open Access Journals (Sweden)

    Ririn Widiyasari

    2018-02-01

    Full Text Available Tujuan yang ingin dicapai dalam penelitian ini adalah mengetahui faktor apa saja  yang mempengaruhi motivasi belajar mahasiswa, apakah terdapat pengaruh yang signifikan antara cara belajar, fasilitas belajar dan lingkungan belajar terhadap motivasi belajar mahasiswa, serta faktor mana yang paling berpengaruh terhadap motivasi belajar mahasiswa. Jumlah sampel dalam penelitian ini adalah 192 mahasiswa (FIP UMJ angkatan tahun 2013-2015 yang aktif mengikuti perkuliahan. Metode penelitian yang dilakukan adalah metode kuantitatif survey. Metode pengambilan data menggunakan  kuesioner dengan skala likert. Metode analisis data yang digunakan adalah analisis deskriptif, dan analisis  Structural Equation Modeling (SEM berbantuan program LISREL 8.3. Uji hipotesis yang digunakan dalam penelitian ini adalah uji Chi-square dan uji t. Hasil penelitian menunjukkan bahwa variabel cara belajar memiliki kontribusi yang paling besar, selanjutnya variabel kedua yang berkontribusi meningkatkan motivasi belajar adalah lingkungan belajar dan terakhir fasilitas belajar memberikan pengaruh yang paling kecil terhadap motivasi belajar. Jadi, variabel laten cara belajar dan lingkungan belajar berpengaruh positif terhadap motivasi belajar dan fasilitas belajar berpengaruh negatif terhadap motivasi belajar.

  6. NEW CONCEPTS AND TEST METHODS OF CURVE PROFILE AREA DENSITY IN SURFACE: ESTIMATION OF AREAL DENSITY ON CURVED SPATIAL SURFACE

    OpenAIRE

    Hong Shen

    2011-01-01

    The concepts of curve profile, curve intercept, curve intercept density, curve profile area density, intersection density in containing intersection (or intersection density relied on intersection reference), curve profile intersection density in surface (or curve intercept intersection density relied on intersection of containing curve), and curve profile area density in surface (AS) were defined. AS expressed the amount of curve profile area of Y phase in the unit containing surface area, S...

  7. Polar representation of centrifugal pump homologous curves

    International Nuclear Information System (INIS)

    Veloso, Marcelo Antonio; Mattos, Joao Roberto Loureiro de

    2008-01-01

    Essential for any mathematical model designed to simulate flow transient events caused by pump operations is the pump performance data. The performance of a centrifugal pump is characterized by four basic parameters: the rotational speed, the volumetric flow rate, the dynamic head, and the hydraulic torque. Any one of these quantities can be expressed as a function of any two others. The curves showing the relationships between these four variables are called the pump characteristic curves, also referred to as four-quadrant curves. The characteristic curves are empirically developed by the pump manufacturer and uniquely describe head and torque as functions of volumetric flow rate and rotation speed. Because of comprising a large amount of points, the four-quadrant configuration is not suitable for computational purposes. However, it can be converted to a simpler form by the development of the homologous curves, in which dynamic head and hydraulic torque ratios are expressed as functions of volumetric flow and rotation speed ratios. The numerical use of the complete set of homologous curves requires specification of sixteen partial curves, being eight for the dynamic head and eight for the hydraulic torque. As a consequence, the handling of homologous curves is still somewhat complicated. In solving flow transient problems that require the pump characteristic data for all the operation zones, the polar form appears as the simplest way to represent the homologous curves. In the polar method, the complete characteristics of a pump can be described by only two closed curves, one for the dynamic head and other for the hydraulic torque, both in function of a single angular coordinate defined adequately in terms of the quotient between volumetric flow ratio and rotation speed ratio. The usefulness and advantages of this alternative method are demonstrated through a practical example in which the homologous curves for a pump of the type used in the main coolant loops of a

  8. ANALISIS PERUBAHAN PENGGUNAAN LAHAN DAN DAMPAKNYA TERHADAP HASIL AIR DI DAS CISADANE HULU

    Directory of Open Access Journals (Sweden)

    Nilda Nilda

    2015-08-01

    Full Text Available Air merupakan salah satu kebutuhan dasar yang sangat penting bagi manusia. Terdapat beberapa faktor utama penyebab perubahan sumber daya air, diantaranya adalah perubahan penutupandan pengelolaan lahan yang meningkatkan kekedapan lahan.Salah satu tujuan pengelolaan DAS adalah mencapai kondisi tata air optimal yang dapat dikenali dari sifat aliran sungai. Penelitian ini bertujuan untuk: (1 mengetahui distribusi perubahan penggunaan lahan yang terjadi di wilayah DAS Cisadane Hulu dari tahun 2003 sampai 2010; (2 mengetahui perubahan hasil air akibat distribusi perubahan penggunaan lahan. Daerah kajian penelitian adalah DAS Cisadane Hulu dengan luasan sekitar 22.288,01 ha. Penelitian dilakukan melalui dua tahap yaitu analisis perubahan penggnaan lahan dan prediksi aliran dengan model HEC-HMS. Dalam penelitian ini digunakan peta pengunaan lahan dari BIG (Badan Informasi Geospasial tahun 2003 dan Peta Penggunaan Lahan tahun 2010 hasil interpretasi Citra ALOS. Selanjutnya kedua peta tersebut dianalisis dengan metoda tabel silang (cross tabel untuk memperoleh data perubahan penggunaan lahan dari setiap kelas penggunaannya. Kedua data series penggunaan lahan ini digunakan sebagai input pada model prediksi debit aliran HEC-HMS. Selanjutnya dibangun juga skenario-skenario untuk melihat dampak perubahan lahan terhadap debit aliran di DAS Cisadane Hulu. Metode bilangan kurva (SCS-CN dipilih untuk menghitung besar curah hujan efektif, yaitu dari pengurangan curah hujan bruto dengan berbagai bentuk kehilangan air (loss. Transformasi dari curah hujan efektif menjadi hidrograf aliran langsung (direct runoff diperoleh dengan menggunakan metode hidrograf satuan SCS Curve Number. Selama kurun waktu 2003 – 2010 terjadi perubahan penggunaan lahan di DAS Cisadane Hulu. Luas Hutan bertambah 223,78 ha, pemukiman 214,78 ha, rumput/tanah kosong 85, 73 ha, dan gedung 12, 64 ha. Terjadi penguarangan luas semak belukar 225,64 ha, tegalan/ladang 145,92 ha, sawah irigasi 124

  9. ANALISIS PENGARUH UMUR, PENDIDIKAN, DAN UPAH TERHADAP PRODUKTIVITAS TENAGA KERJA

    Directory of Open Access Journals (Sweden)

    Zakaria Firmansyah

    2017-06-01

    Full Text Available Produktivitas merupakan salah satu indikator yang paling penting dari kegiatan ekonomi. Produktivitas merupakan pendorong utama pertumbuhan ekonomi penting, yaitu sebagai leverage (leverage untuk pertumbuhan ekonomi nasional dalam jangka panjang. Itulah salah satu alasan mengapa negara-negara saat ini banyak telah berusaha untuk meningkatkan  produktivitas. Masalah ketenagakerjaan didominasi oleh kemampuan produktivitas tenaga kerja masih belum memadai baik dari segi pendidikan, pengalaman kerja dan lain-lain Satu hanya untuk pekerja di mitra industri rambut Purbalingga bahwa sebagian besar pekerja perempuan tersebut. Data dianalisis menggunakan analisis deskriptif kuantitatif, Regresi Pengujian, dan Asumsi Klasik Uji. Hasil yang diperoleh menunjukkan bahwa secara bersama-sama Umur, Pendidikan, dan Upah dampak positif dan signifikan terhadap produktivitas tenaga kerja di rambut Industri Mitra Purbalingga dibuktikan dari hasil uji F untuk dan nilai prob. F-hitung (0.000000 <5%. R2 = 0,98673. berarti bahwa 98,6 persen dari kemampuan variasi set variabel independen (independent yang digunakan dalam model ini dapat menjelaskan variasi dalam produktivitas tenaga kerja di mitra industri rambut di Purbalingga. Sedangkan 1,4 persen sisanya  dipengaruhi  oleh  variasi dalam variabel dependen dijelaskan oleh variabel lain di luar model yang digunakan dalam penelitian ini. Kesimpulan dari penelitian ini adalah sebagian yaitu 3 variabel independen digunakan untuk memiliki pengaruh yang signifikan pada α = 5% dari produktivitas tenaga kerja di mitra Industri Rambut di Purbalingga variabel ini adalah usia, pendidikan, dan Upah. Productivity is one of the most important indicator of economic activity . Productivity is a key driver of economic growth vital , namely as leverage ( leverage for national economic growth in the long term. That's one reason why today many countries have sought to improve productivity. Employment issues are dominated by the

  10. ANALISIS DAN MODEL STRATEGI PENINGKATAN DAYA SAING PRODUK EDAMAME BEKU

    Directory of Open Access Journals (Sweden)

    Sandryas Alief Kurniasanti

    2015-03-01

    penelitian ini adalah untuk menganalisis daya saing dan merumuskan prioritas alternatif strategi peningkatan daya saing produk edamame beku di PT MT 27. Metode yang digunakan dalam penelitian ini adalah Revealed Comparative Advantage untuk mengetahui kinerja ekspor dari produk edamame beku di pasar dunia, kemudian menganalisis faktor persaingan dengan menggunakan Diamond Porter’s Theory. Alternatif strategi dihasilkan dari analisis SWOT dan ditentukan prioritasnya dengan menggunakan analytical hierarchy process dari satu narasumber ahli. Hasil penelitian menunjukkan bahwa prioritas alternatif strategi peningkatan daya saing produk edamame beku PT MT 27 secara berurutan meliputi: (1 diversifikasi pasar, (2 diversifikasi produk, (3 meningkatkan kerjasama luar negeri, (4 pengembangan divisi Research and Development, (5 mengembangkan program Corporate Social Responsibility, (6 pengelolaan keuangan secara baik dan benar, serta (7 mengembangkan areal pertanian yang berbasis rumah kaca untuk menghindari cuaca buruk karena beriklim tropis. Implikasi Manajerial dari penelitian ini adalah mengembangkan pasar yang sudah ada, dan mengembangkan jenis produk yang diproduksi untuk memenuhi selera pasar ekspor dan juga penghematan biaya produksi. Kata kunci: daya saing, edamame beku, Mitratani Dua Tujuh, strategi daya saing

  11. ANALISIS KARAKTER WISATAWAN MANCANEGARA TERHADAP FASILITAS WISATA KAWASAN PRAWIROTAMAN

    Directory of Open Access Journals (Sweden)

    Reiza Miftah Wirakusuma

    2016-03-01

    , pengrajin batik dan suasana akomodasi yang santai menjadikan nilai yang sangat berharga bagi suatu daya tarik wisata. Dengan adanya perkembangan teknologi dan semakin tingginya persaingan perhotelan di Yogyakarta, Lalu bagaimanakah dengan kondisi saat ini? penelitian ini akan mengungkap apa yang mempengaruhi wisatawan mancanegara datang ke kawasan Prawirotaman. Temuan-temuan yang dihasilkan yaitu Wisatawan Mancanegara didominasi 5 besar kewarganegaraan: Belanda, Jerman, Perancis, USA, dan Jepang. Dari hasil analisis dapat disimpulkan bahwa (1 Adanya pengaruh secara parsial antara variabel daya tarik terhadap kunjungan wisatawan mancanegara. Hal ini menyatakan bahwa variabel Daya Tarik dapat berpengaruh secara mandiri tanpa variabel lain. Hal ini juga menandakan bahwa kekuatan daya tarik kawasan yang utama adalah keragaman kompleks kuliner internasional dengan harga yang terjangkau disamping suasana dan ketersediaan akomodasi. (2 Karakter wisatawan mancanegara mempengaruhi kombinasi dari produk wisata yang ditawarkan Kawasan Prawirotaman. Perlu diketahui bahwa karakter segmentasi demografis ternyata lebih dominan untuk menentukan pola perjalanan. kesimpulannya, wisatawan mancanegara dibagi berdasarkan usia seperti Youth Travelers (Independent or Couple, Honeymooners, Retirement, and Family with infant or younger children. Berdasarkan data sekunder dan pengamatan, segmentasi Youth Travelers bersifat sangat sensitif terhadap harga dan pengguna internet yang sangat aktif, lalu segmentasi Retirement and Family lebih berorientasi pada kenyamanan fasilitas dan privacy. Terakhir, Honeymooners merupakan kombinasi dari keduanya. Kata kunci: Produk Wisata, Prawirotaman, Persepsi, Karakter, Wisatawan Mancanegara

  12. ANALISIS PENGARUH KREDIBILITAS MEREK TERHADAP SENSITIVITAS HARGA KONSUMEN

    Directory of Open Access Journals (Sweden)

    Anik - Kusmintarti

    2012-05-01

    Full Text Available ABSTRAKS   Informasi yang tidak sempurna dan tidak simetris mengakibatkan timbulnya ketidakpastian yang dihadapi konsumen tentang atribut dan/ atau manfaat apa yang didapat dari sebuah produk.  Dalam kondisi seperti ini penting bagi perusahaan untuk menyampaikan informasi terpercaya kepada konsumen, yaitu informasi yang jujur dan perusahaan harus bersedia dan mampu menyampaikan apa yang telah dijanjikan. Merek yang kredibel berpengaruh terhadap  kesan kualitas, resiko yang diterima dan biaya informasi. Kemudian kesan kualitas, resiko yang diterima dan biaya informasi akan mempengaruhi manfaat yang diharapkan.  Dan selanjutnya akan mempengaruhi sensitivitas harga konsumen. Populasi dalam penelitian ini adalah wanita dewasa yang berdomisili di kota Malang dan sampelnya adalah wanita berumur 17 sampai sengan 45 tahun yang menggunakan shampo Anti Ketombe dari satu atau lebih merek-merek yang sedang diteliti. Jumlah responden 100 orang dan metode pengambilan sampel yang digunakan adalah nonprobability sampling, dan teknik pengambilan sampel yang digunakan adalah quota sampling. Uji empiris menggunakan Metode Analisis Jalur. Hasil penelitian menunjukkan bahwa kredibilitas merek berpengaruh terhadap sensitivitas harga konsumen. Selain itu kredibilitas merek berpengaruh secara tak langsung terhadap sensitivitas harga konsumen melalui kesan kualitas dan manfaat yang diharapkan; Kredibilitas merek berpengaruh tak langsung terhadap sensitivitas harga konsumen melalui melalui biaya informasi dan manfaat yang diharapkan. Pengaruh kredibilitas merek terhadap sensitivitas harga konsumen melalui resiko yang dirasakan dan manfaat yang diharapkan tidak signifikan. Temuan ini tidak konsisten dengan temuan dari penelitian yang dilakukan Erdem dan Swait (1998. Hal ini menurut peneliti disebabkan oleh responden dari penelitian yang peneliti lakukan cenderung mudah percaya dengan informasi-informasi yang ada disekelilingnya dan kurang peduli dengan keberadaan

  13. ANALISIS PENGENDALIAN DAYA REAKTOR PCMSR DENGAN LAJU ALIR PENDINGIN

    Directory of Open Access Journals (Sweden)

    Iqbal Syafin Noha

    2015-03-01

    Full Text Available Passive Compact Molten Salt Reactor (PCMSR merupakan pengembangan dari Molten Salt Reactor (MSR yang memiliki karakter berbeda dengan lima reaktor generasi IV lainnya, yaitu menggunakan bahan bakar leburan garam. Pada reaktor MSR, garam lebur tidak digunakan sebagai pendingin tetapi digunakan sebagai medium pembawa bahan bakar. Dengan fase bahan bakar yang berupa garam lebur LiF-BeF2-ThF4-UF4, maka dapat dilakukan pengendalian daya dengan mengatur laju aliran bahan bakar dan pendingin. Tujuan penelitian ini adalah untuk mengetahui pengaruh perubahan laju alir pendingin terhadap daya reaktor PCMSR. Analisis dilakukan dengan empat jenis masukan untuk perubahan laju alir pendingin, yaitu masukan step, ramp, eksponensial, dan sinusoidal. Untuk masukan step, laju alir pendingin dibuat berubah secara mendadak. Selanjutnya untuk masukan ramp dan eksponensal, perubahan laju alir masing-masing dibuat perlahan secara linear dan mengikuti fungsi eksponensial. Kemudian untuk masukan sinusoidal, laju alir berubah naik turun secara periodik dengan memvariasikan frekuensi dari perubahan laju alir tersebut. Hasil penelitian menunjukkan bahwa penurunan laju alir pendingin sebesar 50% dari laju pendingin sebelumnya, menyebabkan daya pada reaktor PCMSR turun sebesar 63% dari daya sebelumnya. Jika terjadi fluktuasi laju aliran pendingin, maka semakin cepat perubahan tersebut, maka respon daya yang diberikan semakin kecil. Pada frekuensi yang sangat cepat, daya reaktor menjadi konstan dan cenderung tidak memiliki respon terhadap laju aliran. Hal ini merupakan salah satu aspek keselamatan reaktor, karena reaktor tidak merespon perubahan yang terlalu cepat. Kemampuan reaktor mengatur daya menyesuaikan laju aliran pendingin merupakan aspek keselamatan lainnya. Kata kunci : PCMSR, pengendalian daya, laju alir pendingin, uji respon   Passive Compact Molten Salt Reactor (PCMSR is the development of Molten Salt Reactor (MSR which has different character from other five

  14. Analisis Model Relasional Jejaring Sebagai Katalisator Dalam Membangun Kinerja Bisnis

    Directory of Open Access Journals (Sweden)

    Ahmad Sidiq

    2018-01-01

    Full Text Available Abstrak Kesuksesan entrepreneur diukur dari kehandalannya menggabungkan atau mengkombinasikan aset berwujud dan tak berwujud yang dimiliki UKM sehingga mampu mendobrak semua hambatan yang dihadapi UKM yaitu keterbatasan akses pasar dan akses modal, sumber daya yang cenderung rendah, minimnya modal kerja maupun rendahnya kemampuan untuk memanfaatkan peluang pasar yang ada. Berbagai perilaku yang digunakan entrepreneur dalam menjalankan bisnisnya maupun berinteraksi dengan stakeholder mengarah pada relasional jejaring dan kompetensi sosial yang harus dimiliki oleh seorang entrepreneur. Penelitian ini bertujuan untuk menguji faktor yang mampu memperluas relasional jejaring entrepreneur dan faktor konsekuensi dari adanya relasional jejaring yang dimiliki oleh seorang entrepreneur. Faktor-faktor tersebut sangat berkaitan dengan pencapaian kinerja bisnis pada UKM. Populasi penelitian ini adalah UKM sektor manufaktur di wilayah Surakarta dengan sampel sebanyak 127 UKM. Metode pemilihahan sampel adalah convenience sampling dan dianalisis menggunakan Structural Equation Modeling (SEM dengan bantuan Partial Least Square (PLS dalam pengolahan data penelitian. Hasil analisis data menunjukkan kinerja bisnis dapat dijelaskan oleh kompetensi sosial, relasional jejaring dan orientasi berbagi pengetahuan sebesar 69.5%. Adapun hasil pengujian hipotesis menunjukkan kinerja bisnis dipengaruhi oleh kompetensi sosial, relasional jejaring dan orientasi berbagi pengetahuan. Selain itu kompetensi sosial berpengaruh pada relasional jejaring dan relasional jejaring memberi pengaruh pada orientasi berbagi pengetahuan.  Kata Kunci : kompetensi sosial, relasional jejaring, berbagi pengetahuan, kinerja bisnis Abstract The success of the entrepreneur is measured by reliability merge or combine the tangible assets and intangible owned by SMEs so as to break down all the barriers faced by SMEs is limited access to markets and access to capital, resources tend to be low, the

  15. ANALISIS KEMAMPUAN MENATA ARSIP SISWA JURUSAN ADMINISTRASI PERKANTORAN

    Directory of Open Access Journals (Sweden)

    Bunga Aprilia Kartini

    2016-02-01

    Full Text Available Salah satu kemampuan yang harus dimiliki Program Administrasi Perkantoran adalah kompetensi dasar penataan dokumen. Kompetensi yang diharapkan dari kompetensi penataan dokumen adalah dapat menyimpan dan menemukan kembali dokumen/arsip sesuai dengan sistem yang diterapkan dalam perusahaan. Pembelajaran yang terjadi di SMK PGRI 2 Salatiga, siswa jurusan Administrasi Perkantoran tidak mendapatkan praktik menemukan kembali arsip/dokumen serta tidak ada laboratorium khusus kearsipan. Hal ini tentu akan mempengaruhi kemampuan lulusan dari siswa-siswanya. Kemampuan tersebut akan berujung pada kemampuan lulusan dalam memenuhi standar kerja suatu perusahaan atau organisasi. Populasi dalam penelitian ini yaitu seluruh siswa kelas XI Jurusan Administrasi Perkantoran SMK PGRI 2 Salatiga yang terdiri dari 2 kelas dengan jumlah 64 siswa. Penelitian ini merupakan penelitian deskriptif kuantitatif dengan teknik pengumpulan data menggunakan metode wawancara, observasi dan kuesioner. Teknik analisis data yang digunakan adalah dengan angka indeks. Hasil Penelitian menunjukan bahwa rata-rata kemampuan siswa dalam menata dokumen/arsip dengan angka indeks adalah sebesar 68,85 hal tersebut menunjukkan bahwa siswa umumnya memiliki kemampuan yang sedang, walaupun secara teori pemahaman siswa sudah cukup baik namun secara praktik siswa masih memiliki kekurangan yaitu siswa kurang menguasai dalam praktik mengindeks, memberikan kode penyimpanan, pencatatan kartu pinjam arsip, membaca kode penyimpanan dan prosedur penemuan kembali arsip/dokumen. Siswa juga belum diajarkan praktik penyimpanan sistem wilayah, sistem nomor dan sistem subjek/perihal sehingga kemampuan meraka dalam sistem penyimpanan tersebut masih kurang serta siswa juga belum diajarkan praktik penemuan kembali surat/arsip. Office Administration program is one of the must have skills that are the basis of the competencies document setup. Learning happens in SMK PGRI 2 Salatiga , students in Administrative

  16. ANALISIS PENGARUH KONSUMSI ROKOK DENGAN KEMISKINAN DI PROVINSI JAWA TENGAH

    Directory of Open Access Journals (Sweden)

    Agnes Marisca Dian Sari

    2017-06-01

    Full Text Available Tujuan penelitian ini adalah untuk mengetahui pengaruh kemiskinan dengan konsumsi rokok di Jawa Tengah tahun 2013 dan mengetahui pengaruh pajak rokok dengan konsumsi rokok di Jawa Tengah tahun 2013. Jenis data yang digunakan adalah data sekunder. Metode analisis yang digunakan ialah regresi Ordinary Least Square (OLS dengan data cross section tahun 2013 di Provinsi Jawa Tengah dengan 35 Kabupaten/Kota. Hasil penelitian ini adalah ketika Garis kemiskinan naik maka akan menaikan konsumsi rokok. Variabel Garis kemiskinan signifikan dan positif terhadap konsumsi rokok di Jawa Tengah tahun 2013.Variabel pajak rokok bernilai positif namun tidak signifikan. Variabel Kemiskinan dan pajak rokok mampu menjelaskan tingkat konsumsi rokok sebesar 0.1263% dan sisanya dijelaskan oleh variabel lain. F-statistik sebesar 2,31. F-tabel sebesar 1,37, dan t-tabel sebesar 2,034.Hasil penelitian dapat disimpulkan adanya pengaruh antara konsumsi rokok dengan kemiskinan di Jawa Tengah tahun 2013. Ketika konsumsi rokok di Jawa Tengah naik maka meningkatkan kemiskinan di Jawa Tengah pada Tahun 2013 dan pengaruh antara konsumsi rokok dan pajak rokok di Jawa Tengah pada tahun 2013 tidak signifikan tapi bernilai positif. Artinya kebijakan pajak di Jawa Tengah belum mampu untuk mengurangi konsumsi rokok di Jawa Tengah pada tahun 2013. Meskipun sudah ada pajak rokok namun konsumsi rokok tetap terus meningkat. The aims of this research were to find out the effects of poverty on cigarette consumption in Central Java in 2013 and to recognize the effects of tax cigarette on cigarette consumption in Central Java in 2013. The type of the data used was secondary data. The analysis method used was the regression of Ordinary Least Square (OLS with the cross section data of 2013 in 35 Districts of Central Java Province.The research results show that when the Poverty Line increases, it increases cigarette consumption. The variable on Poverty Line has effect on cigarette consumption in

  17. ANALISIS DAYA SAING EKSPOR SEKTOR UNGGULAN DI JAWA TENGAH

    Directory of Open Access Journals (Sweden)

    Wiwit Santi Wahyuningsih

    2017-06-01

    Full Text Available Penelitian ini bertujuan untuk mengidentifikasi industri unggulan yang ada di Jawa Tengah, dan kemudian industri unggulan tersebut diidentifikasi mana saja yang mempunyai daya saing ekspor. Penelitian ini menggunakan data PDRB Jawa Tengah dan PDB Tahun 2010-2015, Tabel Input Output Jawa Tengah Tahun 2013, serta data Ekspor-Impor Jawa Tengah Tahun 1997-2015. Data tersebut diperoleh dari data sekunder, yaitu dengan memanfaatkan data yang telah tersedia pada instansi terkait. Penelitian ini mengunakan alat analisis Indeks Daya Penyebaran (IDP, Indeks Derajat Kepekaan (IDK dan Revealed Comparative Advantage (RCA. Dari hasil IDP dan IDK terdapat 9 industri unggulan di Jawa Tengah yaitu industri pengolahan dan pengawetan ikan, industri minyak dan lemak, industri penggilingan padi, industri tepung terigu dan tepung lainnya, industri makanan ternak, industri pemintalan, industri tekstil, industri kayu dan bahan bangunan dari kayu, serta industri karet dan barang dari karet. Tetapi dari 9 industri unggulan tersebut yang memiliki daya saing ekspor tinggi hanya ada 3 industri yaitu industri dengan IDP>1, IDK>1 dan RCA>1 yang meliputi industri pemintalan, industri tekstil, dan industri kayu dan bahan bangunan dari kayu. Dari penelitian ini dapat disimpulkan bahwa sektor industri yang dapat diandalkan untuk meningkatkan pertumbuhan ekonomi melalui ekspor dan memiliki daya saing ekspor yang sangat bagus serta memilki harga jual tinggi yaitu hanya industri pemintalan, industri tekstil, dan industri kayu dan bahan bangunan dari kayu. Maka dari itu sebaiknya kebijakan pemerintah lebih ditekankan pada sektor hulu dan sektor hilir dari industri-industri tersebut. This research’s aim is to identify the leading manufactures in central Java then identify which of those industries have the export competitiveness. This study used data of Central Java’s Gross Domestic Regional Product (GDRP and Gross National Product (GNP on 2010-2015, Input Output Table on 2013, as

  18. Migration and the Wage-Settings Curve

    DEFF Research Database (Denmark)

    Brücker, Herbert; Jahn, Elke

    Germany on basis of a wage-setting curve. The wage-setting curve relies on the assumption that wages respond to a hange in the unemployment rate, albeit imperfectly. This allows one to derive the wage and employment effects of migration simultaneously in a general equilibrium framework. Using...

  19. Learning curves in energy planning models

    Energy Technology Data Exchange (ETDEWEB)

    Barreto, L; Kypreos, S [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    This study describes the endogenous representation of investment cost learning curves into the MARKAL energy planning model. A piece-wise representation of the learning curves is implemented using Mixed Integer Programming. The approach is briefly described and some results are presented. (author) 3 figs., 5 refs.

  20. The Koch curve as a smooth manifold

    International Nuclear Information System (INIS)

    Epstein, Marcelo; Sniatycki, Jedrzej

    2008-01-01

    We show that there exists a homeomorphism between the closed interval [0,1] is contained in R and the Koch curve endowed with the subset topology of R 2 . We use this homeomorphism to endow the Koch curve with the structure of a smooth manifold with boundary

  1. Fermionic fields on ZN-curves

    International Nuclear Information System (INIS)

    Bershadsky, M.; Radul, A.

    1988-01-01

    The line bundles of degree g-1 on Z N -curves corresponding to 1/N nonsingular characteristics are considered. The determinants of Dirac operators defined on these line bundles are evaluated in terms of branch points. The generalization of Thomae's formula for Z N -curves is derived. (orig.)

  2. Measuring Model Rocket Engine Thrust Curves

    Science.gov (United States)

    Penn, Kim; Slaton, William V.

    2010-01-01

    This paper describes a method and setup to quickly and easily measure a model rocket engine's thrust curve using a computer data logger and force probe. Horst describes using Vernier's LabPro and force probe to measure the rocket engine's thrust curve; however, the method of attaching the rocket to the force probe is not discussed. We show how a…

  3. A minicourse on moduli of curves

    International Nuclear Information System (INIS)

    Looijenga, E.

    2000-01-01

    These are notes that accompany a short course given at the School on Algebraic Geometry 1999 at the ICTP, Trieste. A major goal is to outline various approaches to moduli spaces of curves. In the last part I discuss the algebraic classes that naturally live on these spaces; these can be thought of as the characteristic classes for bundles of curves. (author)

  4. Minimal families of curves on surfaces

    KAUST Repository

    Lubbes, Niels

    2014-01-01

    A minimal family of curves on an embedded surface is defined as a 1-dimensional family of rational curves of minimal degree, which cover the surface. We classify such minimal families using constructive methods. This allows us to compute the minimal

  5. Symmetry Properties of Potentiometric Titration Curves.

    Science.gov (United States)

    Macca, Carlo; Bombi, G. Giorgio

    1983-01-01

    Demonstrates how the symmetry properties of titration curves can be efficiently and rigorously treated by means of a simple method, assisted by the use of logarithmic diagrams. Discusses the symmetry properties of several typical titration curves, comparing the graphical approach and an explicit mathematical treatment. (Author/JM)

  6. Deep-learnt classification of light curves

    DEFF Research Database (Denmark)

    Mahabal, Ashish; Gieseke, Fabian; Pai, Akshay Sadananda Uppinakudru

    2017-01-01

    Astronomy light curves are sparse, gappy, and heteroscedastic. As a result standard time series methods regularly used for financial and similar datasets are of little help and astronomers are usually left to their own instruments and techniques to classify light curves. A common approach is to d...

  7. Hyper-and-elliptic-curve cryptography

    NARCIS (Netherlands)

    Bernstein, D.J.; Lange, T.

    2014-01-01

    This paper introduces ‘hyper-and-elliptic-curve cryptography’, in which a single high-security group supports fast genus-2-hyperelliptic-curve formulas for variable-base-point single-scalar multiplication (for example, Diffie–Hellman shared-secret computation) and at the same time supports fast

  8. Curve Matching with Applications in Medical Imaging

    DEFF Research Database (Denmark)

    Bauer, Martin; Bruveris, Martins; Harms, Philipp

    2015-01-01

    In the recent years, Riemannian shape analysis of curves and surfaces has found several applications in medical image analysis. In this paper we present a numerical discretization of second order Sobolev metrics on the space of regular curves in Euclidean space. This class of metrics has several...

  9. Remote sensing used for power curves

    International Nuclear Information System (INIS)

    Wagner, R; Joergensen, H E; Paulsen, U S; Larsen, T J; Antoniou, I; Thesbjerg, L

    2008-01-01

    Power curve measurement for large wind turbines requires taking into account more parameters than only the wind speed at hub height. Based on results from aerodynamic simulations, an equivalent wind speed taking the wind shear into account was defined and found to reduce the power standard deviation in the power curve significantly. Two LiDARs and a SoDAR are used to measure the wind profile in front of a wind turbine. These profiles are used to calculate the equivalent wind speed. The comparison of the power curves obtained with the three instruments to the traditional power curve, obtained using a cup anemometer measurement, confirms the results obtained from the simulations. Using LiDAR profiles reduces the error in power curve measurement, when these are used as relative instrument together with a cup anemometer. Results from the SoDAR do not show such promising results, probably because of noisy measurements resulting in distorted profiles

  10. Parametric representation of centrifugal pump homologous curves

    International Nuclear Information System (INIS)

    Veloso, Marcelo A.; Mattos, Joao R.L. de

    2015-01-01

    Essential for any mathematical model designed to simulate flow transient events caused by pump operations is the pump performance data. The performance of a centrifugal pump is characterized by four basic quantities: the rotational speed, the volumetric flow rate, the dynamic head, and the hydraulic torque. The curves showing the relationships between these four variables are called the pump characteristic curves. The characteristic curves are empirically developed by the pump manufacturer and uniquely describe head and torque as functions of volumetric flow rate and rotation speed. Because of comprising a large amount of points, this configuration is not suitable for computational purposes. However, it can be converted to a simpler form by the development of the homologous curves, in which dynamic head and hydraulic torque ratios are expressed as functions of volumetric flow and rotation speed ratios. The numerical use of the complete set of homologous curves requires specification of sixteen partial curves, being eight for the dynamic head and eight for the hydraulic torque. As a consequence, the handling of homologous curves is still somewhat complicated. In solving flow transient problems that require the pump characteristic data for all the operation zones, the parametric form appears as the simplest way to deal with the homologous curves. In this approach, the complete characteristics of a pump can be described by only two closed curves, one for the dynamic head and other for the hydraulic torque, both in function of a single angular coordinate defined adequately in terms of the quotient between volumetric flow ratio and rotation speed ratio. The usefulness and advantages of this alternative method are demonstrated through a practical example in which the homologous curves for a pump of the type used in the main coolant loops of a pressurized water reactor (PWR) are transformed to the parametric form. (author)

  11. Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program.

    Science.gov (United States)

    Afouxenidis, D; Polymeris, G S; Tsirliganis, N C; Kitis, G

    2012-05-01

    This paper exploits the possibility of using commercial software for thermoluminescence and optically stimulated luminescence curve deconvolution analysis. The widely used software package Microsoft Excel, with the Solver utility has been used to perform deconvolution analysis to both experimental and reference glow curves resulted from the GLOw Curve ANalysis INtercomparison project. The simple interface of this programme combined with the powerful Solver utility, allows the analysis of complex stimulated luminescence curves into their components and the evaluation of the associated luminescence parameters.

  12. Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program

    International Nuclear Information System (INIS)

    Afouxenidis, D.; Polymeris, G. S.; Tsirliganis, N. C.; Kitis, G.

    2012-01-01

    This paper exploits the possibility of using commercial software for thermoluminescence and optically stimulated luminescence curve deconvolution analysis. The widely used software package Microsoft Excel, with the Solver utility has been used to perform deconvolution analysis to both experimental and reference glow curves resulted from the Glow Curve Analysis Intercomparison project. The simple interface of this programme combined with the powerful Solver utility, allows the analysis of complex stimulated luminescence curves into their components and the evaluation of the associated luminescence parameters. (authors)

  13. Mannheim Partner D-Curves in the Euclidean 3-space

    Directory of Open Access Journals (Sweden)

    Mustafa Kazaz

    2015-02-01

    Full Text Available In this paper, we consider the idea of Mannheim partner curves for curves lying on surfaces. By considering the Darboux frames of surface curves, we define Mannheim partner D-curves and give the characterizations for these curves. We also find the relations between geodesic curvatures, normal curvatures and geodesic torsions of these associated curves. Furthermore, we show that definition and characterizations of Mannheim partner D-curves include those of Mannheim partner curves in some special cases.

  14. A versatile curve-fit model for linear to deeply concave rank abundance curves

    NARCIS (Netherlands)

    Neuteboom, J.H.; Struik, P.C.

    2005-01-01

    A new, flexible curve-fit model for linear to concave rank abundance curves was conceptualized and validated using observational data. The model links the geometric-series model and log-series model and can also fit deeply concave rank abundance curves. The model is based ¿ in an unconventional way

  15. Investigation of learning and experience curves

    Energy Technology Data Exchange (ETDEWEB)

    Krawiec, F.; Thornton, J.; Edesess, M.

    1980-04-01

    The applicability of learning and experience curves for predicting future costs of solar technologies is assessed, and the major test case is the production economics of heliostats. Alternative methods for estimating cost reductions in systems manufacture are discussed, and procedures for using learning and experience curves to predict costs are outlined. Because adequate production data often do not exist, production histories of analogous products/processes are analyzed and learning and aggregated cost curves for these surrogates estimated. If the surrogate learning curves apply, they can be used to estimate solar technology costs. The steps involved in generating these cost estimates are given. Second-generation glass-steel and inflated-bubble heliostat design concepts, developed by MDAC and GE, respectively, are described; a costing scenario for 25,000 units/yr is detailed; surrogates for cost analysis are chosen; learning and aggregate cost curves are estimated; and aggregate cost curves for the GE and MDAC designs are estimated. However, an approach that combines a neoclassical production function with a learning-by-doing hypothesis is needed to yield a cost relation compatible with the historical learning curve and the traditional cost function of economic theory.

  16. Modelling curves of manufacturing feasibilities and demand

    Directory of Open Access Journals (Sweden)

    Soloninko K.S.

    2017-03-01

    Full Text Available The authors research the issue of functional properties of curves of manufacturing feasibilities and demand. Settlement of the problem, and its connection with important scientific and practical tasks. According to its nature, the market economy is unstable and is in constant movement. Economy has an effective instrument for explanation of changes in economic environment; this tool is called the modelling of economic processes. The modelling of economic processes depends first and foremost on the building of economic model which is the base for the formalization of economic process, that is, the building of mathematical model. The effective means for formalization of economic process is the creation of the model of hypothetic or imaginary economy. The building of demand model is significant for the market of goods and services. The problem includes the receiving (as the result of modelling definite functional properties of curves of manufacturing feasibilities and demand according to which one can determine their mathematical model. Another problem lies in obtaining majorant properties of curves of joint demand on the market of goods and services. Analysis of the latest researches and publications. Many domestic and foreign scientists dedicated their studies to the researches and building of the models of curves of manufacturing feasibilities and demand. In spite of considerable work of the scientists, such problems as functional properties of the curves and their practical use in modelling. The purpose of the article is to describe functional properties of curves of manufacturing feasibilities and demand on the market of goods and services on the base of modelling of their building. Scientific novelty and practical value. The theoretical regulations (for functional properties of curves of manufacturing feasibilities and demand received as a result of the present research, that is convexity, give extra practical possibilities in a microeconomic

  17. Reflected Light Curves of Extrasolar Planets

    Science.gov (United States)

    Green, D.; Matthews, J.; Kuschnig, R.; Seager, S.

    The planned launches of ultra-precise photometric satellites such as MOST, COROT and MONS should provide the first opportunity to study the reflected light curves from extrasolar planets. To predict the capabilities of these missions, we have constructed a series of models of such light curves, improving upon the Monte Carlo simulations by Seager et al. (2000). These models include more realistic features such limb darkening of the star and broad band photometry. For specific models, the resulting planet light curves exhibit unique behavior with the variation of radius, inclination and presence or absence of clouds.

  18. Neck curve polynomials in neck rupture model

    International Nuclear Information System (INIS)

    Kurniadi, Rizal; Perkasa, Yudha S.; Waris, Abdul

    2012-01-01

    The Neck Rupture Model is a model that explains the scission process which has smallest radius in liquid drop at certain position. Old fashion of rupture position is determined randomly so that has been called as Random Neck Rupture Model (RNRM). The neck curve polynomials have been employed in the Neck Rupture Model for calculation the fission yield of neutron induced fission reaction of 280 X 90 with changing of order of polynomials as well as temperature. The neck curve polynomials approximation shows the important effects in shaping of fission yield curve.

  19. Morse theory on timelike and causal curves

    International Nuclear Information System (INIS)

    Everson, J.; Talbot, C.J.

    1976-01-01

    It is shown that the set of timelike curves in a globally hyperbolic space-time manifold can be given the structure of a Hilbert manifold under a suitable definition of 'timelike.' The causal curves are the topological closure of this manifold. The Lorentzian energy (corresponding to Milnor's energy, except that the Lorentzian inner product is used) is shown to be a Morse function for the space of causal curves. A fixed end point index theorem is obtained in which a lower bound for the index of the Hessian of the Lorentzian energy is given in terms of the sum of the orders of the conjugate points between the end points. (author)

  20. Constructing forward price curves in electricity markets

    DEFF Research Database (Denmark)

    Fleten, S.-E.; Lemming, Jørgen Kjærgaard

    2003-01-01

    We present and analyze a method for constructing approximated high-resolution forward price curves in electricity markets. Because a limited number of forward or futures contracts are traded in the market, only a limited picture of the theoretical continuous forward price curve is available...... to the analyst. Our method combines the information contained in observed bid and ask prices with information from the forecasts generated by bottom-up models. As an example, we use information concerning the shape of the seasonal variation from a bottom-up model to improve the forward price curve quoted...

  1. Curves of restricted type in euclidean spaces

    Directory of Open Access Journals (Sweden)

    Bengü Kılıç Bayram

    2014-01-01

    Full Text Available Submanifolds of restricted type were introduced in [7]. In the present study we consider restricted type of curves in Em. We give some special examples. We also show that spherical curve in S2(r C E3 is of restricted type if and only if either ƒ(s is constant or a linear function of s of the form ƒ(s = ±s + b and every closed W - curve of rank k and of length 2(r in E2k is of restricted type.

  2. Constructing forward price curves in electricity markets

    International Nuclear Information System (INIS)

    Fleten, Stein-Erik; Lemming, Jacob

    2003-01-01

    We present and analyze a method for constructing approximated high-resolution forward price curves in electricity markets. Because a limited number of forward or futures contracts are traded in the market, only a limited picture of the theoretical continuous forward price curve is available to the analyst. Our method combines the information contained in observed bid and ask prices with information from the forecasts generated by bottom-up models. As an example, we use information concerning the shape of the seasonal variation from a bottom-up model to improve the forward price curve quoted on the Nordic power exchange

  3. Growth curves for twins in Slovenia.

    Science.gov (United States)

    Bricelj, Katja; Blickstein, Isaac; Bržan-Šimenc, Gabrijela; Janša, Vid; Lučovnik, Miha; Verdenik, Ivan; Trojner-Bregar, Andreja; Tul, Nataša

    2017-02-01

    Abnormalities of fetal growth are more common in twins. We introduce the growth curves for monitoring fetal growth in twin pregnancies in Slovenia. Slovenian National Perinatal Information System for the period between 2002 and 2010 was used to calculate birth weight percentiles for all live born twins for each week from 22nd to 40th week. The calculated percentiles of birth weight for all live-born twins in Slovenia served as the basis for drawing 'growth' curves. The calculated growth curves for twins will help accurately diagnose small or large twin fetuses for their gestational age in the native central European population.

  4. Wind Turbine Power Curves Incorporating Turbulence Intensity

    DEFF Research Database (Denmark)

    Sørensen, Emil Hedevang Lohse

    2014-01-01

    . The model and method are parsimonious in the sense that only a single function (the zero-turbulence power curve) and a single auxiliary parameter (the equivalent turbulence factor) are needed to predict the mean power at any desired turbulence intensity. The method requires only ten minute statistics......The performance of a wind turbine in terms of power production (the power curve) is important to the wind energy industry. The current IEC-61400-12-1 standard for power curve evaluation recognizes only the mean wind speed at hub height and the air density as relevant to the power production...

  5. Technological change in energy systems. Learning curves, logistic curves and input-output coefficients

    International Nuclear Information System (INIS)

    Pan, Haoran; Koehler, Jonathan

    2007-01-01

    Learning curves have recently been widely adopted in climate-economy models to incorporate endogenous change of energy technologies, replacing the conventional assumption of an autonomous energy efficiency improvement. However, there has been little consideration of the credibility of the learning curve. The current trend that many important energy and climate change policy analyses rely on the learning curve means that it is of great importance to critically examine the basis for learning curves. Here, we analyse the use of learning curves in energy technology, usually implemented as a simple power function. We find that the learning curve cannot separate the effects of price and technological change, cannot reflect continuous and qualitative change of both conventional and emerging energy technologies, cannot help to determine the time paths of technological investment, and misses the central role of R and D activity in driving technological change. We argue that a logistic curve of improving performance modified to include R and D activity as a driving variable can better describe the cost reductions in energy technologies. Furthermore, we demonstrate that the top-down Leontief technology can incorporate the bottom-up technologies that improve along either the learning curve or the logistic curve, through changing input-output coefficients. An application to UK wind power illustrates that the logistic curve fits the observed data better and implies greater potential for cost reduction than the learning curve does. (author)

  6. A simple Lissajous curves experimental setup

    Science.gov (United States)

    Şahin Kızılcık, Hasan; Damlı, Volkan

    2018-05-01

    The aim of this study is to develop an experimental setup to produce Lissajous curves. The setup was made using a smartphone, a powered speaker (computer speaker), a balloon, a laser pointer and a piece of mirror. Lissajous curves are formed as follows: a piece of mirror is attached to a balloon. The balloon is vibrated with the sound signal provided by the speaker that is connected to a smartphone. The laser beam is reflected off the mirror and the reflection is shaped as a Lissajous curve. Because of the intersection of two frequencies (frequency of the sound signal and natural vibration frequency of the balloon), these curves are formed. They can be used to measure the ratio of frequencies.

  7. On ``minimally curved spacetimes'' in general relativity

    OpenAIRE

    Dadhich, Naresh

    1997-01-01

    We consider a spacetime corresponding to uniform relativistic potential analogus to Newtonian potential as an example of ``minimally curved spacetime''. We also consider a radially symmetric analogue of the Rindler spacetime of uniform proper acceleration relative to infinity.

  8. Utilization of curve offsets in additive manufacturing

    Science.gov (United States)

    Haseltalab, Vahid; Yaman, Ulas; Dolen, Melik

    2018-05-01

    Curve offsets are utilized in different fields of engineering and science. Additive manufacturing, which lately becomes an explicit requirement in manufacturing industry, utilizes curve offsets widely. One of the necessities of offsetting is for scaling which is required if there is shrinkage after the fabrication or if the surface quality of the resulting part is unacceptable. Therefore, some post-processing is indispensable. But the major application of curve offsets in additive manufacturing processes is for generating head trajectories. In a point-wise AM process, a correct tool-path in each layer can reduce lots of costs and increase the surface quality of the fabricated parts. In this study, different curve offset generation algorithms are analyzed to show their capabilities and disadvantages through some test cases and improvements on their drawbacks are suggested.

  9. Quaternion orders, quadratic forms, and Shimura curves

    CERN Document Server

    Alsina, Montserrat

    2004-01-01

    Shimura curves are a far-reaching generalization of the classical modular curves. They lie at the crossroads of many areas, including complex analysis, hyperbolic geometry, algebraic geometry, algebra, and arithmetic. The text provides an introduction to the subject from a theoretic and algorithmic perspective. The main topics covered in it are Shimura curves defined over the rational number field, the construction of their fundamental domains, and the determination of their complex multiplication points. The study of complex multiplication points in Shimura curves leads to the study of families of binary quadratic forms with algebraic coefficients and to their classification by arithmetic Fuchsian groups. In this regard, the authors develop a theory full of new possibilities which parallels Gauss' theory on the classification of binary quadratic forms with integral coefficients by the action of the modular group. Each topic covered in the book begins with a theoretical discussion followed by carefully worked...

  10. Uncovering the skewness news impact curve

    Czech Academy of Sciences Publication Activity Database

    Anatolyev, Stanislav; Petukhov, A.

    2016-01-01

    Roč. 14, č. 4 (2016), s. 746-771 ISSN 1479-8409 Institutional support: RVO:67985998 Keywords : conditional skewness * news impact curve * stock returns Subject RIV: AH - Economics Impact factor: 1.800, year: 2016

  11. Classification of ASKAP Vast Radio Light Curves

    Science.gov (United States)

    Rebbapragada, Umaa; Lo, Kitty; Wagstaff, Kiri L.; Reed, Colorado; Murphy, Tara; Thompson, David R.

    2012-01-01

    The VAST survey is a wide-field survey that observes with unprecedented instrument sensitivity (0.5 mJy or lower) and repeat cadence (a goal of 5 seconds) that will enable novel scientific discoveries related to known and unknown classes of radio transients and variables. Given the unprecedented observing characteristics of VAST, it is important to estimate source classification performance, and determine best practices prior to the launch of ASKAP's BETA in 2012. The goal of this study is to identify light curve characterization and classification algorithms that are best suited for archival VAST light curve classification. We perform our experiments on light curve simulations of eight source types and achieve best case performance of approximately 90% accuracy. We note that classification performance is most influenced by light curve characterization rather than classifier algorithm.

  12. Automorphisms of double coverings of curves

    International Nuclear Information System (INIS)

    Torres, F.

    1994-11-01

    We study automorphisms of curves that commute with each other. We prove that the order and the number of fixed points of one of them satisfy certain relations involving those of the other. Then, we specialize our results to the case of double coverings of curves. For instance, if the genus of the curve is at least 4γ + 2 and γ >= 1 (γ = the genus of the covered curve) we prove that the order of an automorphism is bounded above by 2γ + 1 (resp. 4γ + 2) provided it is prime (resp. it has at least five fixed points). We also improve Farkas' bound on the number of fixed points namely 4γ + 4 by showing that it involves the order of the automorphism except in the case of even order when such an improvement is obtained provided the automorphism and the γ-involution has at least one common fixed point. (author). 15 refs

  13. Uncovering the skewness news impact curve

    Czech Academy of Sciences Publication Activity Database

    Anatolyev, Stanislav; Petukhov, A.

    2016-01-01

    Roč. 14, č. 4 (2016), s. 746-771 ISSN 1479-8409 Institutional support: PRVOUK-P23 Keywords : conditional skewness * news impact curve * stock returns Subject RIV: AH - Economics Impact factor: 1.800, year: 2016

  14. Transmission of wave energy in curved ducts

    Science.gov (United States)

    Rostafinski, W.

    1973-01-01

    A formation of wave energy flow was developed for motion in curved ducts. A parametric study over a range of frequencies determined the ability of circular bends to transmit energy for the case of perfectly rigid walls.

  15. Twisted Vector Bundles on Pointed Nodal Curves

    Indian Academy of Sciences (India)

    Abstract. Motivated by the quest for a good compactification of the moduli space of -bundles on a nodal curve we establish a striking relationship between Abramovich's and Vistoli's twisted bundles and Gieseker vector bundles.

  16. Statistics from dynamics in curved spacetime

    International Nuclear Information System (INIS)

    Parker, L.; Wang, Y.

    1989-01-01

    We consider quantum fields of spin 0, 1/2, 1, 3/2, and 2 with a nonzero mass in curved spacetime. We show that the dynamical Bogolubov transformations associated with gravitationally induced particle creation imply the connection between spin and statistics: By embedding two flat regions in a curved spacetime, we find that only when one imposes Bose-Einstein statistics for an integer-spin field and Fermi-Dirac statistics for a half-integer-spin field in the first flat region is the same type of statistics propagated from the first to the second flat region. This derivation of the flat-spacetime spin-statistics theorem makes use of curved-spacetime dynamics and does not reduce to any proof given in flat spacetime. We also show in the same manner that parastatistics, up to the fourth order, are consistent with the dynamical evolution of curved spacetime

  17. RMS fatigue curves for random vibrations

    International Nuclear Information System (INIS)

    Brenneman, B.; Talley, J.G.

    1984-01-01

    Fatigue usage factors for deterministic or constant amplitude vibration stresses may be calculated with well known procedures and fatigue curves given in the ASME Boiler and Pressure Vessel Code. However, some phenomena produce nondeterministic cyclic stresses which can only be described and analyzed with statistical concepts and methods. Such stresses may be caused by turbulent fluid flow over a structure. Previous methods for solving this statistical fatigue problem are often difficult to use and may yield inaccurate results. Two such methods examined herein are Crandall's method and the ''3sigma'' method. The objective of this paper is to provide a method for creating ''RMS fatigue curves'' which accurately incorporate the requisite statistical information. These curves are given and may be used by analysts with the same ease and in the same manner as the ASME fatigue curves

  18. ANALISIS KEBERADAAN BIDAN DESA DAN DUKUN BAYI DI JAWA TIMUR

    Directory of Open Access Journals (Sweden)

    Mochamad Setyo Pramono

    2013-03-01

    through the course. Suggestion: Patterns midwife partnership with shamans only one way to improve the coverage of deliveries by health personnel. The approach must be done from two sides, which is also in the community. The abilityof midwives to promotive and preventive accordance with the local culture are factors in addition to the factors of education and knowledge in society itself. Key words: midwives, tradistional birth attendants, East Java ABSTRAK Latar Belakang: Tujuan MDGs yang berupa meningkatkan kesehatan ibu, salah satu indikatornya adalah proporsi pertolongan kelahiran oleh tenaga kesehatan terlatih. Terkait dengan hal tersebut yang menjadi ujung tombak dilapangan adalah bidan desa. Kehadiran profesi bidan bukan berada di dalam lahan yang kosong, karena secara tradisi keberadaan dukun bayi telah ada terlebih dahulu. Pada kondisi geografis dan sosial masyarakat yang beragam, keberadaan mereka bisa menjadi khazanah kekayaan budaya. Menjadi menarik ketika dua kepentingan yang sejalan tetapi berbeda latar belakang ini bertemu di lapangan. Bagaimana eksistensi mereka di masyarakat terutama di perdesaan yang tradisinya masih kuat. Metode: Penelitian ini merupakan gabungan penelitian kuantitatif dan kualitatif. Penelitian ini dilakukan pada tahun 2011 di empat kabupaten di Jawa Timur yaitu Sampang, Probolinggo, Jombang dan Madiun. Pemilihan kabupaten mengacu pada karakteristik masyarakat di Jawa Timur yaitu Madura, Pandalungan, Arek dan Mataraman. Pengumpulan data dilakukan dengan cara observasi dan wawancara mendalam, informannya adalah bidan desa dan dukun bayi pada tiap wilayah puskesmas terpilih. Data dianalisis dengan teknik analisis domain, kategorial dan komponensial, sehingga membentuk matriks atau tipologi. Hasil: Terdapat dikotomi bidan senior dan bidan muda. Bidan senior kebanyakan berasal dari luar daerah. Jumlahnya terbatas sementara cakupan wilayah yang luas, tidak jarang membuat mereka memilih tinggal di pusat kecamatan. Akibatnya, pelayanan

  19. Neutron cross sections: Book of curves

    International Nuclear Information System (INIS)

    McLane, V.; Dunford, C.L.; Rose, P.F.

    1988-01-01

    Neuton Cross Sections: Book of Curves represents the fourth edition of what was previously known as BNL-325, Neutron Cross Sections, Volume 2, CURVES. Data is presented only for (i.e., intergrated) reaction cross sections (and related fission parameters) as a function of incident-neutron energy for the energy range 0.01 eV to 200 MeV. For the first time, isometric state production cross sections have been included. 11 refs., 4 figs

  20. Constructing elliptic curves from Galois representations

    OpenAIRE

    Snowden, Andrew; Tsimerman, Jacob

    2017-01-01

    Given a non-isotrivial elliptic curve over an arithmetic surface, one obtains a lisse $\\ell$-adic sheaf of rank two over the surface. This lisse sheaf has a number of straightforward properties: cyclotomic determinant, finite ramification, rational traces of Frobenius, and somewhere not potentially good reduction. We prove that any lisse sheaf of rank two possessing these properties comes from an elliptic curve.

  1. Curved twistor spaces and H-space

    International Nuclear Information System (INIS)

    Tod, K.P.

    1980-01-01

    The curved twistor space construction of Penrose for anti-self-dual solutions to the Einstein vacuum equations is described. Curved twistor spaces are defined and it is shown with the aid of an example how to obtain them by deforming the complex structure of regions of flat twistor space. The connection of this procedure with Newman's H-space construction via asymptotic twistor space is outlined. (Auth.)

  2. Potential Energy Curve of N2 Revisited

    Czech Academy of Sciences Publication Activity Database

    Špirko, Vladimír; Xiangzhu, L.; Paldus, J.

    2011-01-01

    Roč. 76, č. 4 (2011), s. 327-341 ISSN 0010-0765 R&D Projects: GA MŠk LC512; GA ČR GAP208/11/0436 Institutional research plan: CEZ:AV0Z40550506 Keywords : reduced multireference coupled-cluster method * reduced potential curve method * nitrogen molecule potential energy curves Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.283, year: 2011

  3. Curvature Entropy for Curved Profile Generation

    OpenAIRE

    Ujiie, Yoshiki; Kato, Takeo; Sato, Koichiro; Matsuoka, Yoshiyuki

    2012-01-01

    In a curved surface design, the overall shape features that emerge from combinations of shape elements are important. However, controlling the features of the overall shape in curved profiles is difficult using conventional microscopic shape information such as dimension. Herein two types of macroscopic shape information, curvature entropy and quadrature curvature entropy, quantitatively represent the features of the overall shape. The curvature entropy is calculated by the curvature distribu...

  4. Anomalies in curved spacetime at finite temperature

    International Nuclear Information System (INIS)

    Boschi-Filho, H.; Natividade, C.P.

    1993-01-01

    We discuss the problem of the breakdown of conformal and gauge symmetries at finite temperature in curved spacetime background, when the changes in the background are gradual. We obtain the expressions for the Seeley's coefficients and the heat kernel expansion in this regime. As applications, we consider the self-interacting lambda phi''4 and chiral Schwinger models in curved backgrounds at finite temperature. (Author) 9 refs

  5. Learning curves in health professions education.

    Science.gov (United States)

    Pusic, Martin V; Boutis, Kathy; Hatala, Rose; Cook, David A

    2015-08-01

    Learning curves, which graphically show the relationship between learning effort and achievement, are common in published education research but are not often used in day-to-day educational activities. The purpose of this article is to describe the generation and analysis of learning curves and their applicability to health professions education. The authors argue that the time is right for a closer look at using learning curves-given their desirable properties-to inform both self-directed instruction by individuals and education management by instructors.A typical learning curve is made up of a measure of learning (y-axis), a measure of effort (x-axis), and a mathematical linking function. At the individual level, learning curves make manifest a single person's progress towards competence including his/her rate of learning, the inflection point where learning becomes more effortful, and the remaining distance to mastery attainment. At the group level, overlaid learning curves show the full variation of a group of learners' paths through a given learning domain. Specifically, they make overt the difference between time-based and competency-based approaches to instruction. Additionally, instructors can use learning curve information to more accurately target educational resources to those who most require them.The learning curve approach requires a fine-grained collection of data that will not be possible in all educational settings; however, the increased use of an assessment paradigm that explicitly includes effort and its link to individual achievement could result in increased learner engagement and more effective instructional design.

  6. Environmental bias and elastic curves on surfaces

    International Nuclear Information System (INIS)

    Guven, Jemal; María Valencia, Dulce; Vázquez-Montejo, Pablo

    2014-01-01

    The behavior of an elastic curve bound to a surface will reflect the geometry of its environment. This may occur in an obvious way: the curve may deform freely along directions tangent to the surface, but not along the surface normal. However, even if the energy itself is symmetric in the curve's geodesic and normal curvatures, which control these modes, very distinct roles are played by the two. If the elastic curve binds preferentially on one side, or is itself assembled on the surface, not only would one expect the bending moduli associated with the two modes to differ, binding along specific directions, reflected in spontaneous values of these curvatures, may be favored. The shape equations describing the equilibrium states of a surface curve described by an elastic energy accommodating environmental factors will be identified by adapting the method of Lagrange multipliers to the Darboux frame associated with the curve. The forces transmitted to the surface along the surface normal will be determined. Features associated with a number of different energies, both of physical relevance and of mathematical interest, are described. The conservation laws associated with trajectories on surface geometries exhibiting continuous symmetries are also examined. (paper)

  7. Geometric invariant theory for polarized curves

    CERN Document Server

    Bini, Gilberto; Melo, Margarida; Viviani, Filippo

    2014-01-01

    We investigate GIT quotients of polarized curves. More specifically, we study the GIT problem for the Hilbert and Chow schemes of curves of degree d and genus g in a projective space of dimension d-g, as d decreases with respect to g. We prove that the first three values of d at which the GIT quotients change are given by d=a(2g-2) where a=2, 3.5, 4. We show that, for a>4, L. Caporaso's results hold true for both Hilbert and Chow semistability. If 3.5curves. If 2curves. We also analyze in detail the critical values a=3.5 and a=4, where the Hilbert semistable locus is strictly smaller than the Chow semistable locus. As an application, we obtain three compactications of the universal Jacobian over the moduli space of stable curves, weakly-pseudo-stable curves and pseu...

  8. Global experience curves for wind farms

    International Nuclear Information System (INIS)

    Junginger, M.; Faaij, A.; Turkenburg, W.C.

    2005-01-01

    In order to forecast the technological development and cost of wind turbines and the production costs of wind electricity, frequent use is made of the so-called experience curve concept. Experience curves of wind turbines are generally based on data describing the development of national markets, which cause a number of problems when applied for global assessments. To analyze global wind energy price development more adequately, we compose a global experience curve. First, underlying factors for past and potential future price reductions of wind turbines are analyzed. Also possible implications and pitfalls when applying the experience curve methodology are assessed. Second, we present and discuss a new approach of establishing a global experience curve and thus a global progress ratio for the investment cost of wind farms. Results show that global progress ratios for wind farms may lie between 77% and 85% (with an average of 81%), which is significantly more optimistic than progress ratios applied in most current scenario studies and integrated assessment models. While the findings are based on a limited amount of data, they may indicate faster price reduction opportunities than so far assumed. With this global experience curve we aim to improve the reliability of describing the speed with which global costs of wind power may decline

  9. Stenting for curved lesions using a novel curved balloon: Preliminary experimental study.

    Science.gov (United States)

    Tomita, Hideshi; Higaki, Takashi; Kobayashi, Toshiki; Fujii, Takanari; Fujimoto, Kazuto

    2015-08-01

    Stenting may be a compelling approach to dilating curved lesions in congenital heart diseases. However, balloon-expandable stents, which are commonly used for congenital heart diseases, are usually deployed in a straight orientation. In this study, we evaluated the effect of stenting with a novel curved balloon considered to provide better conformability to the curved-angled lesion. In vitro experiments: A Palmaz Genesis(®) stent (Johnson & Johnson, Cordis Co, Bridgewater, NJ, USA) mounted on the Goku(®) curve (Tokai Medical Co. Nagoya, Japan) was dilated in vitro to observe directly the behavior of the stent and balloon assembly during expansion. Animal experiment: A short Express(®) Vascular SD (Boston Scientific Co, Marlborough, MA, USA) stent and a long Express(®) Vascular LD stent (Boston Scientific) mounted on the curved balloon were deployed in the curved vessel of a pig to observe the effect of stenting in vivo. In vitro experiments: Although the stent was dilated in a curved fashion, stent and balloon assembly also rotated conjointly during expansion of its curved portion. In the primary stenting of the short stent, the stent was dilated with rotation of the curved portion. The excised stent conformed to the curved vessel. As the long stent could not be negotiated across the mid-portion with the balloon in expansion when it started curving, the mid-portion of the stent failed to expand fully. Furthermore, the balloon, which became entangled with the stent strut, could not be retrieved even after complete deflation. This novel curved balloon catheter might be used for implantation of the short stent in a curved lesion; however, it should not be used for primary stenting of the long stent. Post-dilation to conform the stent to the angled vessel would be safer than primary stenting irrespective of stent length. Copyright © 2014 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

  10. Analisis Karakteristik Hujan untuk Pendugaan Debit Aliran Rencana Sungai Anafri di Kota Jayapura

    Directory of Open Access Journals (Sweden)

    Nurfaijin Nurfaijin

    2016-10-01

    Full Text Available ABSTRAK Penelitian ini bertujuan mengkaji karakteristik hujan wilayah DAS Anafri, menghitung debit aliran rencana, dan mengkaji kapasitas Sungai Anafri dalam merespon pengalihragaman hujan menjadi aliran permukaan. Kajian karakteristik hujan yakni ketebalan, intensitas, dan durasi hujan dilakukan dengan analisis statistik data hujan. Analisis distribusi data hujan diasumsikan sesuai dengan Metode Gumbel, sehingga untuk menentukan hujan periode ulang 2 tahun, 5 tahun, 10 tahun, dan 25 tahun menggunakan persamaan Gumbel. Hujan periode ulang digunakan untuk menghitung debit aliran rencana Metode Rasional. Analisis kapasitas sungai dilakukan dengan membandingkan debit aliran rencana dalam periode ulang T dengan kapasitas sungai. Penghitungan kapasitas sungai dilakukan pada penampang PI (bagian hulu, P2,dan P3 (bagian hilir. Debit aliran rencana yang digunakan dalam analisis kapasitas sungai adalah debit aliran Q25tahun (107,478 m³/detikdan 163,726 m³/detik. Hasil analisis menunjukan bahawa, terjadinya limpasan pada penampang sungai PI dan P2 pada saat menampung debit banjir yang diketahui penyebab utamanya adalah bank full capacity kecil, maka alternat! ( penanganan yang direkomendasikan adalah peninggian tanggul sungai. Analisis kapasitas sungai menggunakan debit banjir periode ulang 25 tahun menunjukan bahwa, terjadi limpasan pada lokasi penampang PI sampai P2 dengan panjang ruas 400 m yang terjadi pada tanggul sisi kanan dan tanggul sisi kiri dengan panjang ruas 40 meter. Limpasan terjadi setinggi 0,1 m hingga 1,6 m pada tanggul sisi kanan dan 0,1 m hingga 0,3 m pada tanggul sisi kiri, sehingga peninggian tanggul yang direkomendasikan adalah setinggi 1,6 mpada sisi kanan dan 0,3 m pada tanggul sisi kiri. ABSTRACT This study aims to examine the characteristics of rainfall watershed of Anafri calculate the flow rate plan, and assess the river capacity to respond diversion of rain to be surface runoff. In this study, the analysis of rainfall

  11. PENGKLASIFIKASIAN KARAKTERISTIK MAHASISWA BARU DALAM MEMILIH PROGRAM STUDI MENGGUNAKAN ANALISIS CLUSTER

    Directory of Open Access Journals (Sweden)

    Maxsi Ary

    2016-03-01

    Full Text Available Abstract - Object Clustering is one of the object mining process which aims to partition an existing object into one or more cluster objects based on their characteristics. Private Universities is one of the alternatives for the community colleges to meet increased demand for educational needs. The number of private colleges, especially in Bandung and generally in Indonesia is quite a lot. The number of colleges and universities means used to attract prospective students to be an interesting thing to study. As a reason for the intense competition in the search for new students, no doubt there are some ways that actually do not need to be done. Issues raised, namely classify new students of characteristics in selecting a course using cluster analysis. Data obtained from the questionnaire prospective new students in February 2014 Data processing using SPSS. The results using analysis SPSS aiming easier to describe the characteristics of each group of new students in choosing courses. Keywords: Clustering, characteristics of students, courses, cluster analysis Abstrak - Pengelompokan Objek (object clustering adalah salah satu proses dari objek mining yang bertujuan untuk mempartisi objek yang ada kedalam satu atau lebih cluster objek berdasarkan karakteristiknya. Perguruan tinggi swasta merupakan salah satu perguruan tinggi alternatif bagi masyarakat untuk menghadapi peningkatan permintaan terhadap kebutuhan pendidikan. Jumlah perguruan tinggi swasta khususnya di Bandung dan umumnya di Indonesia berjumlah cukup banyak. Jumlah perguruan tinggi dan cara yang digunakan perguruan tinggi untuk menarik minat calon mahasiswa menjadi hal yang menarik untuk dikaji. Sebagai alasan ketatnya persaingan dalam mencari calon mahasiswa baru, tidak dipungkiri terdapat beberapa cara yang dilakukan yang sebetulnya tidak perlu dilakukan. Persoalan yang dikemukakan yaitu mengklasifikasikan karakteristik mahasiawa baru dalam memilih program studi menggunakan analisis

  12. ANALISIS SPASIAL FAKTOR LINGKUNGAN PADA KEJADIAN DEMAM BERDARAH DENGUE DI KECAMATAN GENUK

    Directory of Open Access Journals (Sweden)

    Kartika Kirana

    2017-10-01

    Full Text Available ABSTRAK Kecamatan Genuk merupakan salah satu kecamatan yang endemis DBD di Kota Semarang. Secara berturut-turut sejak tahun 2012 hingga 2014, Kecamatan Genuk masuk sebagai tiga besar kasus DBD terbanyak. Salah satu faktor yang mempengaruhi kejadian DBD adalah faktor lingkungan. Tujuan penelitian ini adalah untuk mengetahui gambaran dari hasil analisis spasial faktor lingkungan dengan kejadian DBD di Kecamatan Genuk. Jenis penelitian ini deskriptif dengan pendekatan kuantitatif. Fokus penelitian ini adalah kondisi SPAL, penumpukan ban bekas dan sumur gali. Penelitian ini dilakukan di Kecamatan Genuk (Kelurahan Genuksari, Karangroto, Bangetayu Kulon dan Banjardowo pada bulan Maret 2016. Instrumen meliputi lembar observasi, peta lokasi, Global Positioning System (GPS, alat fotografi dan AcrGIS. Analisis data menggunakan SIG. Hasil penelitian menunjukkan bahwa kejadian DBD menggerombol pada beberapa RW yang berdekatan dengan keberadaan penumpukan ban bekas sekitar permukiman dan sumur gali terbuka.   Kata Kunci        : demam berdarah (DBD, lingkungan, analisis spasial     ABSTRACT Genukis one of dengue fever endemic district in Semarang city. Since 2012 until 2014, Genuk involve as the place that has high incidence of Dengue Fever. One of the factors in the incidence Dengue Fever areenvironmental factors.The goals of this research wasto analize spatial environmental factorsin the incidence Dengue Fever in Genukdistrict. This was a quantitative descriptive research with descriptive survey. The unit this research was water puddle on the pilling of the tire, the dug wells, and waste water pipeline that located in Genuk District (Subdistrict of Genuksari, Karangroto, Bangetayu Kulon and Banjardowo at March 2016. The instruments were paper of observation,the  map, GPS, camera and ArcGIS. Data was analyzed with GIS. The study showed that dengue fever transmission was inthe area with pilling of the tire, and the dug wells.   Keywords

  13. ANALISIS STRATEGI PENGEMBANGAN SEKTOR PERTANIAN SUB SEKTOR BAHAN PANGAN DI KABUPATEN BOYOLALI

    Directory of Open Access Journals (Sweden)

    Muhammad Zaenuri

    2017-06-01

    Full Text Available Permasalahan yang dikaji dalam penelitian ini adalah 1. Komoditas tanaman bahan makanan unggulan apa saja yang ada di masing-masing kecamatan di Kabupaten Boyolali, 2 Bagaimana strategi perencanaan pengembangan subsektor tanaman bahan makanan dilihat dari kelengkapan infrastruktur di Kabupaten Boyolali, 3 Bagaimana laju pertumbuhan sektor tanaman bahan makanan yang dimiliki tiap kecamatan di Kabupaten Boyolali. Data yang digunakan adalah data sekunder. Metode analisis data menggunakan analisis Location Quotient (LQ, Shift Share (SS, Klassen Typologi. Berdasarkan hasil penelitian dengan menggunakan analisis Location Quotient (LQ diketahui pengembangan komoditas padi terdapat di Kecamatan Ngemplak, Kecamatan Banyudono, Kecamatan Sawit. Komoditas tanaman jagung terdapat di Kecamatan Selo, Kecamatan Ampel, Kecamatan Cepogo dan Kecamatan Musuk. Komoditas ubi kayu di Kecamatan Klego, kecamatan Simo. Komoditas ubi jalar di Kecamatan Selo, Kecamatan Simo dan Kecamatan Mojosongo. Komoditas kacang tanah ada di Kecamatan Boyolali dan Kecamatan Nogosari. Komoditas kedelai di Kecamatan Juwangi, Kecamatan Sambi, Kecamatn Kemusu dan Kecamatan Wonosegoro. The problems that were in this research is 1 Commodities food plants seed material what it was in each carpel kecamatan in kabupaten boyolali, 2 how strategy sub planning the development of the food crops sector seen from the completeness of the infrastructure in boyolali district, 3 how sector growth rate of plants of food material possessed every sub-district in boyolali district. The data used was secondary data. Data analysis methods using analysis loqation quotient (LQ, shift share (SS, klassen typologi . According to the research using analysis loqation quotient (LQ development rice is in in ngemplak, in banyudono, in palm. Corn is crops in district violoncello, in ampel, in cepogo and in musuk. Commodities cassava in district klego, in simo. Commodities sweet potatoes in in violoncello, in simo and

  14. Pengaruh Advance Organizer Berbasis Proyek Terhadap Kemampuan Analisis – Sintesis Siswa

    Directory of Open Access Journals (Sweden)

    Tasiwan -

    2014-01-01

    Full Text Available Penelitian ini dilakukan untuk mengetahui pengaruh model pengatur kemajuan (advance organizer berbasis proyek terhadap kemampuan analisis – sintesis siswa pada konsep Energi. Sebelum pembelajaran, diberikan tugas proyek pada siswa untuk merealisasikan bel listrik sederhana, rangkaian arus seri - paralel, dan tuas. Produk proyek digunakan sebagai advance organizer dalam pembelajaran di kelas. Penguatan kognitif dilakukan melalui diskusi kelompok dan pembuatan peta konsep, ekspositori guru di kelas, dan kegiatan eksperimen laboratorium. Data diambil melalui pretest, post test, observasi partisipatif pembelajaran oleh dua orang observer, penilaian produk, peta konsep dan laporan kegiatan eksperimen. Teknik analisis data meliputi uji prasyarat data dan uji hipotesis Hasil penelitian menunjukkan bahwa siswa mengalami peningkatan kemampuan analisis – sintesis dalam aspek menguraikan, mengkategorikan, mengidentifikasi, merumuskan pernyataan, merekonstruksi, menentukan konsep, dan menganalisis konsep dengan rata – rata peningkatan delta skor sebesar 54,46 %, uji t sebesar 6,4, dan skala gain sebesar 0,3. This study was conducted to determine the effect of project-based advance organizer model on student’s analysis - synthesis ability of the energy concept. Students were given an assignment to realize the project on simple electric bell, the series – parallel circuit, and lever, before learning. The products of project were used as an advanced organizer in the learning activity. Cognitive strengthening was done through group discussions and concept mapping, expository learning in the classroom, and laboratory experiments activities. The data were taken through a pretest, post-test, participant observation study by two observers, product assessment, concept maps and report of experiment activities. Results showed that the students’ analysis - synthesis ability increased in the aspect of describing, categorizing, identifying, statement

  15. KERAGAAN WARNA IKAN CLOWN BIAK (Amphiprion percula POPULASI ALAM DAN BUDIDAYA BERDASARKAN ANALISIS GAMBAR DIGITAL

    Directory of Open Access Journals (Sweden)

    Ruby Vidia Kusumah

    2015-09-01

    Full Text Available Penelitian ini bertujuan untuk mengkaji keragaan warna ikan clown Biak (Amphiprion percula populasi alam dan budidaya berdasarkan analisis gambar digital sebagai dasar upaya pemuliaannya. Gambar digital diambil dari koleksi ikan clown Biak Balai Besar Perikanan Budidaya Laut Lampung, Balai Besar Penelitian dan Pengembangan Budidaya Laut Gondol, Bali; serta pengumpul ikan hias di Denpasar, Bali menggunakan kamera digital Canon EOS 600D. Pola warna dikarakterisasi secara visual terhadap variasi strip hitam dan putih pada dasar badan oranye, jenis warna dianalisis menggunakan ImageJ 1.49s, persentase penutupan warna dilakukan dengan Adobe Photoshop CS5. Pola warna dikarakterisasi oleh strip hitam tebal, tipis, gelap, pudar, terputus, bergabung, serta strip putih normal, pelana, spot, melebar, dan terputus. Warna hitam alam dikarakterisasi oleh hue (H: 300-60º, saturation (S: 8%-56%, brightness (B: 3%-19%, sedangkan budidaya H: 300-23º, S: 9%-71%, B: 4%-20%. Warna oranye alam H: 19-33º, S: 88%-98%, B: 47%-85%, dan budidaya H: 14-29º, S: 86%-99%, B: 38%-82%. Warna putih alam H: 36-270º; S: 1%-13%, B: 66%-88%, dan budidaya H: 0-229º, S: 0%-14%, B: 55%-87%. Persentase penutupan warna badan didominasi warna oranye dengan rata-rata 45% untuk populasi alam dan 57% untuk populasi budidaya. Keragaan warna ikan clown Biak dapat diarahkan pada pembentukan strain misbar, picasso, spot (domino, dan onyx. Metode analisis gambar digital sangat potensial digunakan untuk analisis keragaan warna ikan hias.

  16. Pembelajaran Biokimia melalui Analisis Kasus-kasus Olahraga untuk Meningkatkan Sport Scientific Literaci Mahasiswa

    Directory of Open Access Journals (Sweden)

    - Erman

    2013-01-01

    Full Text Available Abstract: Biochemistry Teaching through Sport-case Analyses to Improve Students' Sport Scientific Literacy. This quasi-experimental study focuses on examining the effect of biochemistry teaching on students' sport scientific literacy (SSL. The study involved 107 students of a teacher training institution, selected using a stratified random sampling. The results of t-test utilizing pre-test and post-test control group design show that biochemistry teaching affects students' SSL, as indicated by the scores of the experimental group which were four times higher than those of the control group. The SSL level of the experimental group increased from level 2 (nominal and level 3 (functional to level 3 (functional, level 4 (conceptual, and level 5 (multidimensional. Abstrak: Pembelajaran Biokimia melalui Analisis Kasus-kasus Olahraga untuk Meningkatkan Sport Scientific Literaci Mahasiswa. Penelitian ini bertujuan untuk mengetahui pengaruh pembelajaran biokimia melalui analisis kasus-kasus olahraga terhadap literasi sport scientific mahasiswa. Sebanyak 107 mahasiswa dari program studi ilmu keolahragaan sebuah LPTK di Surabaya dipilih sebagai sampel dengan menggunakan sampling random berstrata. Desain yang digunakan adalah desain pretest-posttest control group dari desain kuasi eksperimen. Data dianalisis dengan uji-t sampel independen. Hasil peneli­tian menunjukkan bahwa pembelajaran biokimia melalui analisis kasus-kasus olahraga merupakan suatu metode yang efektif untuk meningkatkan sport Scientific literacy (SSL mahasiswa. Rerata skor perolehan SSL yang diperoleh mahasiswa kelompok eksperimen sekitar 4 kali lebih tinggi daripada yang diperoleh mahasiswa kelompok kontrol. Tingkatan SSL mahasiswa naik dari level 2 (nominal dan level 3 (fungsional menjadi level 3 (fungsional, level 4 (konseptual, dan level 5 (multidimensional.

  17. Analisis Film Horor Indonesia Produksi Tahun 2014 (Studi Kasus: Mall Klender dan Kamar 207

    Directory of Open Access Journals (Sweden)

    Dedi Sukatno Sembiring Meliala

    2016-02-01

    Full Text Available Abstrak Film horor erat kaitannya dengan tokoh antagonis yang menimbulkan ketakutan pada penonton dalam bentuk makhluk supranatural seperti hantu, roh jahat dan sebagainya. Karakteristik film dengan genre horor membuat penonton terbawa suasana dengan alur ceritanya yang menakutkan. Namun, beberapa dari film horor Indonesia menyajikan adegan-adegan yang kurang sopan bahkan tergolong asusila atau porno. Untuk itu, penelitian ini ingin melihat apakah terdapat konten pornografi pada film Mall Klender dan Kamar 207 yang merupakan film horor Indonesia terlaris di tahun 2014. Analisis dilakukan dengan melihat pandangan dan penilaian 30 responden dengan karakteristik yaitu penonton film horor Indonesia yang berusia 20-40 tahun. Berdasarkan hasil analisis, tidak didapatkan konten pornografi pada film Mall Klender dan Kamar 207. Adegan-adegan yang terindikasi sebagai konten pornografi ternyata masih dapat diterima oleh penonton sebagai adegan yang berada dalam batas kewajaran dan mendukung pembawaan suasana dan kesan dalam cerita yang disampaikan. Kata Kunci: film horror Indonesia, analisis konten, pornografi Abstract The horror film is closely related to the antagonist that causes fear for audience in the form of supernatural creatures such as ghosts, demons and so on. Characteristic of the horor film is to make the audience carried away with the scary plot. However, some of the existing Indonesian horror film presents scenes that classified as obscene or pornographic. Therefore, this study wanted to see if there are any pornographic content on the film Klender Mall and Room 207 is the best-selling Indonesian horror movie in 2014. The analysis was done by looking at the view and assessment of 30 respondents which are Indonesian horror movie goers aged 20-40 years. Based on the analysis, there is no founding of pornographic content on the film Klender Mall and Room 207. The scenes that indicated as pornographic content was still acceptable by the audience

  18. Development of the curve of Spee.

    Science.gov (United States)

    Marshall, Steven D; Caspersen, Matthew; Hardinger, Rachel R; Franciscus, Robert G; Aquilino, Steven A; Southard, Thomas E

    2008-09-01

    Ferdinand Graf von Spee is credited with characterizing human occlusal curvature viewed in the sagittal plane. This naturally occurring phenomenon has clinical importance in orthodontics and restorative dentistry, yet we have little understanding of when, how, or why it develops. The purpose of this study was to expand our understanding by examining the development of the curve of Spee longitudinally in a sample of untreated subjects with normal occlusion from the deciduous dentition to adulthood. Records of 16 male and 17 female subjects from the Iowa Facial Growth Study were selected and examined. The depth of the curve of Spee was measured on their study models at 7 time points from ages 4 (deciduous dentition) to 26 (adult dentition) years. The Wilcoxon signed rank test was used to compare changes in the curve of Spee depth between time points. For each subject, the relative eruption of the mandibular teeth was measured from corresponding cephalometric radiographs, and its contribution to the developing curve of Spee was ascertained. In the deciduous dentition, the curve of Spee is minimal. At mean ages of 4.05 and 5.27 years, the average curve of Spee depths are 0.24 and 0.25 mm, respectively. With change to the transitional dentition, corresponding to the eruption of the mandibular permanent first molars and central incisors (mean age, 6.91 years), the curve of Spee depth increases significantly (P < 0.0001) to a mean maximum depth of 1.32 mm. The curve of Spee then remains essentially unchanged until eruption of the second molars (mean age, 12.38 years), when the depth increases (P < 0.0001) to a mean maximum depth of 2.17 mm. In the adolescent dentition (mean age, 16.21 years), the depth decreases slightly (P = 0.0009) to a mean maximum depth of 1.98 mm, and, in the adult dentition (mean age 26.98 years), the curve remains unchanged (P = 0.66), with a mean maximum depth of 2.02 mm. No significant differences in curve of Spee development were found between

  19. ANALISIS POTENSI DAN PROYEKSI PENERIMAAN RETRIBUSI PELAYANAN PASAR DI KABUPATEN SEMARANG

    Directory of Open Access Journals (Sweden)

    Evi Fatmawati

    2017-06-01

    Full Text Available Retribusi pelayanan pasar merupakan jenis retribusi jasa umum yang cukup potensial, dikarenakan Kabupaten Semarang menarik retribusi dari 33 pasar tradisional setiap harinya. Tujuan penelitian ini, untuk menganalisis potensi penerimaan retribusi pasar di Kabupaten Semarang tahun 2011 – 2015, serta memproyeksi pendapatan retribusi pelayanan pasar tahun 2016 – 2020. Penelitian ini menggunakan analisis kontribusi, analisis pertumbuhan, analisis potensi, dan analisis ARIMA (2,1,2 (Auto Regressive Integrated Moving Average. Hasil penelitian menunjukan: (1 kontribusi retribusi pelayanan pasar terhadap retribusi daerah dan PAD dalam kategori kurang dan sangat kurang, (2 pertumbuhan retribusi pelayanan pasar berfluktuasi, (3 penerimaan retribusi pelayanan pasar belum berdasarkan potensi, (4 target retribusi pelayanan pasar berada dibawah potensi, (5 proyeksi pendapatan retribusi pasar meningkat dalam lima tahun kedepan. Adanya selisih antara potensi dengan realisasi dapat dijadikan peluang oleh Pemerintah Daerah dalam memaksimalkan penerimaan retribusi pelayanan pasar. Saran peneliti yaitu penetapan target sesuai dengan potensi, serta peningkatan kualitas pelayanan pasar, hal tersebut diharapkan dapat meningkatkan sumbangan retribusi pelayanan pasar terhadap PAD di Kabupaten Semarang. Retribution as a source of local income had a great opportunity to be improve and be develop so. Market retribution service was a kind of public service retribution that potential enough, due to Semarang Regency managed and attracted the retribution of 33 traditional markets every day. The objective of this research was to analyze the potential and contribution of market retribution at Semarang Regency in 2011-2015, also approximate local market retribution service in 2016-2010. This research used contribution analysis, the growth analysis, potential analysis, and analyzed ARIMA (2,1,2 (Auto Regressive Integrated Moving Average. The results of this research that : (1

  20. Analisi sui pigmenti di ceramica neolitica tramite tecniche Raman e LIBS

    Directory of Open Access Journals (Sweden)

    Cristina Fabbri

    2007-04-01

    Full Text Available I dati presentati in questo breve contributo provengono da uno studio condotto in collaborazione dal Dipartimento di Scienze Archeologiche dell’Università di Pisa e dall’Istituto per i Processi Chimico-Fisici di Fisica molecolare del CNR di Pisa. Le metodologie applicate sono basate sull’analisi integrata delle tecniche spettroscopiche Raman e LIBS già ampiamente utilizzate nel campo dei Beni Culturali; i metodi sono infatti essenzialmente non distruttivi, non richiedono di un pre trattamento del campione e l’acquisizione delle misure è immediata.

  1. ANALISIS BAURAN PEMASARAN KENDARAAN RODA TIGA MEREK KAISAR PADA PT KAISAR MOTORINDO INDUSTRI PEKANBARU

    Directory of Open Access Journals (Sweden)

    Bambang Suroto

    2015-04-01

    Full Text Available Abstrak: Banyaknya perusahaan atau operator yang melayani jaringan internet secara otomatis akan timbul suatu proses yang dinamakan pemasaran. Di dalam dunia usaha, pemasaran merupakan salah satu fungsi penting didalam suatu perusahaan, karena dalam pemasaran mencakup beberapa hal kegiatan penting yang kita kenal dengan marketing mix yang diantaranya adalah perencanaan produk (product, penetapan harga (price, program promosi (promotion, sangat penting dalam keberhasilan suatu perusahaan namun ada satu hal yang perlu diperhatikan dan perlu dianalisis apabila perusahaan menginginkan atau mempunyai daur hidup atau life cycle produk yang lebih lama, maka perusahaan harus melakukan analisis perilaku pelanggan. Selain kegiatan pemasaran yang sangat penting perusahaan juga tidak boleh mengabaikan apa yang dibutuhkan oleh seorang konsumen, faktor apa saja yang dapat merangsang pelanggan untuk melakukan pembelian suatu barang, serta mengapa konsumen mempunyai banyak kebutuhan dalam waktu yang relatif singkat dan tentunya hal itu semua menggambarkan arti penting sebuah kegiatan analisis perilaku konsumen. Keluhan yang dirasakan konsumen atau pelanggan adalah promosi yang diberikan atau ditawarkan terkadang sering tidak sesuai dengan kenyataan yang ada di lapangan, seperti akses internet yang lama, dan jaringan yang sering terputus karena adanya gangguan dan sistem perbaikan jaringan. Masalah dalam penelitian ini adalah faktor-faktor apakah yang menyebabkan tidak tercapainya target pemasaran pemasangan jaringan internet speedy pada PT.Kaisar Motorindo Industri Pekanbaru. Metode yang digunakan dalam penelitian ini adalah dengan menggunakan metode deskriptif, yaitu menggunakan analisis data kualitatif serta analisis data dengan menghubungkan antara teori dan permasalahan yang diteliti. Hasil penelitian diperoleh variabel produk, dalam hal ini merupakan kombinasi barang dan jasa yang ditawarkan oleh perusahaan kepada pasar sasaran terhadap pemasaran jaringan

  2. ANALISIS FUNDAMENTAL MAKRO DAN INTEGRASI PASAR SAHAM DUNIA DENGAN BURSA EFEK INDONESIA

    Directory of Open Access Journals (Sweden)

    Luh Gede Sri Artini

    2017-11-01

    Full Text Available Penelitian ini merupakan gabungan dari penelitian sebelumnya mengenai hubungan antara harga saham dengan kinerja ekonomi makro, dan penelitian mengenai integrasi Pasar Modal internasional.Variabel ekonomi makro dalam penelitian ini dibatasi pada pertumbuhan PDB, tingkat suku bunga SBI dan nilai Kurs dolar Amerika terhadap Rupiah dan Indeks saham digunakan adalah Indeks Dow Jones, Indeks Saham Australia, Indeks Shanghai dan Indeks Singapura. Data dikumpulkan dari tahun 2011 sampai tahun 2015 secara bulanan dengan teknik analisis regresi linier dengan bantuan Statistical Package For Social Science (SPSS

  3. Dove sta andando l'analisi musicale? Riflessioni sul VII EuroMac

    Directory of Open Access Journals (Sweden)

    Mario Baroni

    2014-01-01

    Full Text Available Come tutti i lettori della Rivista ormai sapranno, si è svolto a Roma dal 29 settembre al 2 ottobre di quest’anno, presso il Conservatorio di S. Cecilia, il settimo convegno europeo di analisi musicale (VII European Music Analysis Conference ossia VII EuroMac. Nel convegno, organizzato dal GATM e diretto da Giorgio Sanguinetti, sono state presentate 197 relazioni e svolti otto laboratori. Tutti i materiali sono stati riassunti in un volume (Programme and Abstract Book, Iter Edizioni di Subiaco curato da Egidio Pozzi e Antonio Cascelli.

  4. ANALISIS KEBIJAKAN LINKAGE PROGRAM LEMBAGA KEUANGAN SYARIAH DALAM RANGKA PEMBERDAYAAN UKM DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Siti Hamidah

    2016-03-01

    Linkage program adalah program yang menghubungkan bank dengan pelaku usaha mikro kecil melalui lembaga keuangan mikro. Kelemahan dalam Linkage program adalah pada aspek peraturan yang tersebar dalam berbagai aturan, dan khusus bagi lembaga keuangan syariah terdapat pula kendala berkaitan dengan kesesuaian dengan ketentuan syariah. Dari penelitian dengan pendekatan perundang-undangan dan pendekatan konseptual ini diperoleh inventarisasi serta analisis kebijakan Linkage Program bagi Lembaga Keuangan Syariah dalam hukum positif Indonesia. Kebijakan terkait Linkage program, diklasifikasi dalam 2 kelompok, yaitu kebijakan substansi dan prosedural. Aturan inilah yang menjadi rujukan bagi lembaga keuangan syariah rangka pemberdayaan usaha kecil mikro di Indonesia. Kata kunci: Linkage program, lembaga keuangan syariah, usaha mikro kecil

  5. Analisi dei cicli del mercato immobiliare: un applicazione sui dati italiani

    Directory of Open Access Journals (Sweden)

    Maurizio Festa!

    2012-06-01

    Full Text Available Utilizzando i dati italiani, sulla base dell'approccio teorico del ciclo "a nido d'ape" proposto da Janssen, Kruijt e Needham nel 1994, questo articolo propone un ulteriore contributo allo studio delle dinamiche del mercato immobiliare italiano. Utilizzando alcuni indicatori del mercato, si presentano i grafici del ciclo a nido d'ape per tutte le regioni e per le principali città. Tecniche di cluster analysis sono utilizzate per raggruppare le regioni che mostrano andamenti simili. L'obiettivo finale dell'analisi è quindi quello di esaminare il territorio nazionale in termini di sviluppo ed evoluzione del mercato delle abitazioni.

  6. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI ADOPSI APLIKASI UBER SEBAGAI PENYEDIA JASA TRANSPORTASI DI SURABAYA

    Directory of Open Access Journals (Sweden)

    Edwin Hendrani

    2017-01-01

    Full Text Available Seiring berjalannya waktu, Teknologi Informasi dan Komunikasi (TIK di dunia ini semakin berkembang dengan pesat. Permintaan masyarakat akan kebutuhan jasa transportasi semakin tinggi. Kemajuan internet dan canggihnya telepon genggam semakin lama semakin canggih, yang membuat lebih nyaman dan efisiensi untuk memanjakan masyarakat. Dari fenomena tersebut lahirlah Uber. Penelitian ini menggunakan teori Technology Acceptance Model (TAM dengan populasi user Uber Kota Surabaya. Penelitian ini bertujuan untuk mengetahui faktor-faktor yang mempengaruhi adopsi aplikasi Uber sebagai penyedia jasa Transportasi di Surabaya. Hasil yang diperoleh setelah di analisis oleh peneliti adalah kepercayaan pengguna dalam mengadopsi aplikasi Uber yang sangat berpengaruh signifikan terhadap keinginan seseorang untuk menggunakan aplikasi Uber.

  7. Analisis dan Rencana Pengembangan Jaringan Distribusi Air Bersih Unit Cabang Timur PDAM Kabupaten Klaten

    Directory of Open Access Journals (Sweden)

    Ana Tri Lestari

    2017-01-01

    Full Text Available Unit Cabang Timur Perusahaan Daerah Air Minum (PDAM Kabupaten Klaten dibagi menjadi 3 unit pelayanan Ibu Kota Kecamatan (IKK dan mempunyai tingkat pelayanan yang masih rendah pada tahun 2015, yaitu Unit IKK Ceper 17,6%; Unit IKK Pedan 2,43%; dan Unit IKK Cawas 31,26% sehingga peningkatan persen pelayanan menjadi hal yang perlu dilakukan. Hal ini didukung dengan adanya penambahan debit produksi sebesar 50 liter/detik. Selain itu, jaringan distibusi belum dibentuk blok pelayanan sehingga sulit untuk mengontrol kehilangan air. Perencanaan ini dilakukan pembagian blok pelayanan menjadi 26 blok dan 5 tapping. Setelah itu dilakukan analisis kondisi eksiting. Hasil analisis kondisi eksisting menunjukkan kondisi hidrolika perpipaan kecuali kecepatan masih memenuhi kriteria, yaitu tekanan antara (15,43-59,99 m, kecepatan (0-0,91 m/detik, unit headloss (0-3,51 m/km. Kemudian dilakukan pengembangan jaringan yang dibagi menjadi 2 tahap, dimana tahap 1 meningkatkan persen pelayanan, sedangkan tahap 2 menambah daerah pelayanan baru. Blok pelayanan setelah pengembangan menjadi 29 blok dan 5 titik tapping. Kemudian analisis rencana pengembangan dilakukan dan menunjukkan bahwa kondisi hidrolika pipa untuk tekanan di jaringan distribusi IKK Cawas bernilai negatif. Hal ini dikarenakan unit headloss yang terjadi pada pipa dari reservoir menuju titik tapping pertama IKK Cawas sebesar 5,78 m/km dengan panjang pipa 14,35 km sehingga headloss  sebesar 82,94 m menyebabkan tekanan menjadi -2,89 m. Permasalahan ini dapat diatasi dengan parallel pipa diameter 200 mm sepanjang 9 km. Parallel pipa tersebut mengakibatkan tekanan  pada titik tapping pertama IKK Cawas menjadi 34,65 m dan titik tapping terjauh (blok 19 sebesar 16,34 m.  Hasil analisis hidrolika, seperti unit headloss berada pada rentang (0-5,78 m/km, namun kecepatan masih ada yang di bawah 0,3 m/detik. Rencana anggaran biaya (RAB yang dibutuhkan untuk melakukan pengembangan jaringan sebesar Rp 2.470.153,051.71.

  8. ANALISIS PENGGUNAAN FILTER AKTIF SHUNT UNTUK MENANGGULANGI THD DI RSUP SANGLAH

    Directory of Open Access Journals (Sweden)

    I Wayan Rinas

    2009-12-01

    Full Text Available Rumah Sakit Umum Pusat Sanglah (RSUP memiliki tingkat THD (Total Harmonics Distortion  arus yang tidak sesuai dengan standar IEEE 159-1992. THD arus yang berlebih dapat menyebabkan berbagai kekurangan. Untuk mengatasi masalah ini digunakan filter aktif shunt berbasis inverter. Dalam penelitian ini dilakukan simulasi penggunaan filter aktif menggunakan sofware simulink MATLAB 7.0.4 Hasil analisis menunjukan pemasangan filter aktif menyebabkan terjadi penurunan kandungan THD arus dan THD tegangan pada feeder yang bermasalah. Kandungan THD arus dan THD tegangan telah sesuai dengan IEEE 152-1992. Daya distorsi harmonisa pada sistem mengalami penurunan dan terjadi peningkatan faktor daya mendekati unity power factor pada feeder.

  9. ANALISIS POSISI RECLOSER TERHADAP KEANDALAN KINERJA PENYULANG SEMPIDI BERBASISKAN SOFTWARE ETAP POWERSTATION

    Directory of Open Access Journals (Sweden)

    I Nengah Sunaya

    2017-11-01

    Full Text Available Penelitian ini menganalisis koordinasi recloser yang terdapat pada penyulang Sempidi untuk meningkatkan keandalan kinerja dari penyulang tersebut. Keandalan yang diharapkan adalah keandalan dalam penyediaan dan penyaluran dayanya. Untuk mengetahui keandalan dalam penyaluran tenaga listrik kepada konsumen perlu diperhitungkan indeks keandalannya. Indeks keandalan menjadi indikator dinyatakan dalam suatu besaran probabilitas yang bertujuan meminimalkan nilai SAIDI dan SAIFI, yaitu 1,8805505 jam/pelanggan tahun dan 5,8200455 kegagalan/pelanggan tahun, serta nilai fitness sebesar 0,091366843 untuk recloser pada posisi 10. Teknik yang digunakan dalam evaluasi keandalan sistem distribusi yaitu metode analisis dengan formula SAIDI dan SAIFI serta metode simulasi dengan memanfaatkan software ETAP powerstation

  10. ANALISIS PERUBAHAN KURIKULUM PADA PROSES PEMBELAJARAN PENDIDIKAN JASMANI OLAHRAGA DAN KESEHATAN DI SEKOLAH DASAR

    Directory of Open Access Journals (Sweden)

    Slamet Yulianto

    2017-01-01

    Tujuan penelitian ini adalah untuk mengetahui perubahan proses pembelajaran PJOK yang dilakukan guru seiring dengan tuntutan perubahan kurikulum sebagai kompetensi keprofesionalan guru. Penelitian ini menggunakan pendekatan penelitian kualitatif dengan jenis fenomenologi untuk menggali data alamiah dari subjek guru PJOK. Pengumpulan data dilakukan oleh peneliti sebagai instrumen kunci dengan teknik wawancara, observasi, dan analisis dokumen kepada subjek guru PJOK di SD inti kota Malang. Hasil penelitian menunjukkan bahwa, guru PJOK telah memenuhi standar profesi guru, guru PJOK telah memahami konsep perubahan kurikulum dan konsep PJOK, namun proses pembelajaran PJOK tidak maksimal sesuai dengan tuntutan perubahan kurikulum sebagai kompetensi keprofesionalan guru.

  11. F(α) curves: Experimental results

    International Nuclear Information System (INIS)

    Glazier, J.A.; Gunaratne, G.; Libchaber, A.

    1988-01-01

    We study the transition to chaos at the golden and silver means for forced Rayleigh-Benard (RB) convection in mercury. We present f(α) curves below, at, and above the transition, and provide comparisons to the curves calculated for the one-dimensional circle map. We find good agreement at both the golden and silver means. This confirms our earlier observation that for low amplitude forcing, forced RB convection is well described by the one-dimensional circle map and indicates that the f(α) curve is a good measure of the approach to criticality. For selected subcritical experimental data sets we calculate the degree of subcriticality. We also present both experimental and calculated results for f(α) in the presence of a third frequency. Again we obtain agreement: The presence of random noise or a third frequency narrows the right-hand (negative q) side of the f(α) curve. Subcriticality results in symmetrically narrowed curves. We can also distinguish these cases by examining the power spectra and Poincare sections of the time series

  12. Multiwavelength light curve parameters of Cepheid variables

    Directory of Open Access Journals (Sweden)

    Bhardwaj Anupam

    2017-01-01

    Full Text Available We present a comparative analysis of theoretical and observed light curves of Cepheid variables using Fourier decomposition. The theoretical light curves at multiple wavelengths are generated using stellar pulsation models for chemical compositions representative of Cepheids in the Galaxy and Magellanic Clouds. The observed light curves at optical (VI, near-infrared (JHKs and mid-infrared (3.6 & 4.5-μm bands are compiled from the literature. We discuss the variation of light curve parameters as a function of period, wavelength and metallicity. Theoretical and observed Fourier amplitude parameters decrease with increase in wavelength while the phase parameters increase with wavelength. We find that theoretical amplitude parameters obtained using canonical mass-luminosity levels exhibit a greater offset with respect to observations when compared to non-canonical relations. We also discuss the impact of variation in convective efficiency on the light curve structure of Cepheid variables. The increase in mixing length parameter results in a zero-point offset in bolometric mean magnitudes and reduces the systematic large difference in theoretical amplitudes with respect to observations.

  13. Incorporating experience curves in appliance standards analysis

    International Nuclear Information System (INIS)

    Desroches, Louis-Benoit; Garbesi, Karina; Kantner, Colleen; Van Buskirk, Robert; Yang, Hung-Chia

    2013-01-01

    There exists considerable evidence that manufacturing costs and consumer prices of residential appliances have decreased in real terms over the last several decades. This phenomenon is generally attributable to manufacturing efficiency gained with cumulative experience producing a certain good, and is modeled by an empirical experience curve. The technical analyses conducted in support of U.S. energy conservation standards for residential appliances and commercial equipment have, until recently, assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. This assumption does not reflect real market price dynamics. Using price data from the Bureau of Labor Statistics, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These experience curves were incorporated into recent energy conservation standards analyses for these products. Including experience curves increases the national consumer net present value of potential standard levels. In some cases a potential standard level exhibits a net benefit when considering experience, whereas without experience it exhibits a net cost. These results highlight the importance of modeling more representative market prices. - Highlights: ► Past appliance standards analyses have assumed constant equipment prices. ► There is considerable evidence of consistent real price declines. ► We incorporate experience curves for several large appliances into the analysis. ► The revised analyses demonstrate larger net present values of potential standards. ► The results imply that past standards analyses may have undervalued benefits.

  14. Comparison of power curve monitoring methods

    Directory of Open Access Journals (Sweden)

    Cambron Philippe

    2017-01-01

    Full Text Available Performance monitoring is an important aspect of operating wind farms. This can be done through the power curve monitoring (PCM of wind turbines (WT. In the past years, important work has been conducted on PCM. Various methodologies have been proposed, each one with interesting results. However, it is difficult to compare these methods because they have been developed using their respective data sets. The objective of this actual work is to compare some of the proposed PCM methods using common data sets. The metric used to compare the PCM methods is the time needed to detect a change in the power curve. Two power curve models will be covered to establish the effect the model type has on the monitoring outcomes. Each model was tested with two control charts. Other methodologies and metrics proposed in the literature for power curve monitoring such as areas under the power curve and the use of statistical copulas have also been covered. Results demonstrate that model-based PCM methods are more reliable at the detecting a performance change than other methodologies and that the effectiveness of the control chart depends on the types of shift observed.

  15. Asymptotic scalings of developing curved pipe flow

    Science.gov (United States)

    Ault, Jesse; Chen, Kevin; Stone, Howard

    2015-11-01

    Asymptotic velocity and pressure scalings are identified for the developing curved pipe flow problem in the limit of small pipe curvature and high Reynolds numbers. The continuity and Navier-Stokes equations in toroidal coordinates are linearized about Dean's analytical curved pipe flow solution (Dean 1927). Applying appropriate scaling arguments to the perturbation pressure and velocity components and taking the limits of small curvature and large Reynolds number yields a set of governing equations and boundary conditions for the perturbations, independent of any Reynolds number and pipe curvature dependence. Direct numerical simulations are used to confirm these scaling arguments. Fully developed straight pipe flow is simulated entering a curved pipe section for a range of Reynolds numbers and pipe-to-curvature radius ratios. The maximum values of the axial and secondary velocity perturbation components along with the maximum value of the pressure perturbation are plotted along the curved pipe section. The results collapse when the scaling arguments are applied. The numerically solved decay of the velocity perturbation is also used to determine the entrance/development lengths for the curved pipe flows, which are shown to scale linearly with the Reynolds number.

  16. Critical Factors for Inducing Curved Somatosensory Saccades

    Directory of Open Access Journals (Sweden)

    Tamami Nakano

    2011-10-01

    Full Text Available We are able to make a saccade toward a tactile stimuli to one hand, but trajectories of many saccades curved markedly when the arms were crossed (Groh & Sparks, 2006. However, it remains unknown why some curved and others did not. We therefore examined critical factors for inducing the curved somatosensory saccades. Participants made a saccade as soon as possible from a central fixation point toward a tactile stimulus delivered to one of the two hands, and switched between arms-crossed and arms-uncrossed postures every 6 trials. Trajectories were generally straight when the arms were uncrossed, but all participants made curved saccades when the arms were crossed (12–64%. We found that the probability of curved saccades depended critically on the onset latency: the probability was less than 5% when the latency was larger than 250 ms, but the probability increased up to 70–80% when the onset latency was 160 ms. This relationship was shared across participants. The results suggest that a touch in the arms-crossed posture was always mapped to the wrong hand in the initial phase up to 160 ms, and then remapped to the correct hand during the next 100 ms by some fundamental neural mechanisms shared across participants.

  17. Analisis Safety System dan Manajemen Risiko pada Steam Boiler PLTU di Unit 5 Pembangkitan Paiton, PT. YTL

    Directory of Open Access Journals (Sweden)

    Luluk Kristianingsih

    2013-09-01

    Full Text Available Pembangkit listrik tenaga uap (PLTU merupakan pembangkit listrik yang banyak digunakan di Indonesia. Salah satu bagian dari sistem PLTU yang memiliki risiko bahaya tinggi adalah boiler, oleh karena itu diperlukan adanya analisis bahaya dan safety system sebagai langkah pencegahan bahaya pada boiler. Analisis bahaya dalam penelitian ini dilakukan menggunakan metode HAZOP. Node yang dipakai adalah economizer, steam drum, superheater, dan reheater yang merupakan komponen utama penyusun boiler. Guide word dan deviasi ditentukan berdasarkan control chart yang dibentuk oleh data proses masing-masing komponen selama bulan Maret 2013. Estimasi likelihood dilakukan berdasarkan data maintenance dari work order PT YTL selama 5 tahun, sedangkan estimasi consequences dilakukan berdasarkan kriteria risiko yang ditimbulkan serta berdasarkan control chart. Hasil perkalian likelihood dan consequences dengan risk matrix menghasilkan kriteria risiko dari komponen. Berdasarkan hasil analisis, diperoleh hasil bahwa komponen yang memiliki risiko bahaya paling besar adalah level transmitter steam drum dengan deviasi berupa less level, yaitu dengan kriteria likelihood adalah A dan consequences 4, sehingga risiko bernilai extreme. Selain itu, risiko extreme juga terdapat pada pressure transmitter outlet superheater, dengan likelihood B dan consequences 4. Untuk menurunkan risiko, maka dilakukan perawatan dan kalibrasi secara rutin, serta penambahan redundant transmitter. Bahaya paling besar pada seluruh node adalah adanya kebakaran. Oleh karena itu, dilakukan analisis emergency response plan untuk kebakaran yang mencakup peta evakuasi, tugas dan tanggungjawab tiap personel, langkah pencegahan, serta langkah penanganan.

  18. Surface growth kinematics via local curve evolution

    KAUST Repository

    Moulton, Derek E.

    2012-11-18

    A mathematical framework is developed to model the kinematics of surface growth for objects that can be generated by evolving a curve in space, such as seashells and horns. Growth is dictated by a growth velocity vector field defined at every point on a generating curve. A local orthonormal basis is attached to each point of the generating curve and the velocity field is given in terms of the local coordinate directions, leading to a fully local and elegant mathematical structure. Several examples of increasing complexity are provided, and we demonstrate how biologically relevant structures such as logarithmic shells and horns emerge as analytical solutions of the kinematics equations with a small number of parameters that can be linked to the underlying growth process. Direct access to cell tracks and local orientation enables for connections to be made to the underlying growth process. © 2012 Springer-Verlag Berlin Heidelberg.

  19. Asymmetry dependence of the nuclear caloric curve

    International Nuclear Information System (INIS)

    McIntosh, A.B.; Bonasera, A.; Cammarata, P.; Hagel, K.; Heilborn, L.; Kohley, Z.; Mabiala, J.; May, L.W.; Marini, P.; Raphelt, A.; Souliotis, G.A.; Wuenschel, S.; Zarrella, A.; Yennello, S.J.

    2013-01-01

    A basic feature of the nuclear equation of state is not yet understood: the dependence of the nuclear caloric curve on the neutron–proton asymmetry. Predictions of theoretical models differ on the magnitude and even the sign of this dependence. In this work, the nuclear caloric curve is examined for fully reconstructed quasi-projectiles around mass A=50. The caloric curve extracted with the momentum quadrupole fluctuation thermometer shows that the temperature varies linearly with quasi-projectile asymmetry (N−Z)/A . An increase in asymmetry of 0.15 units corresponds to a decrease in temperature on the order of 1 MeV. These results also highlight the importance of a full quasi-projectile reconstruction in the study of thermodynamic properties of hot nuclei

  20. The genus curve of the Abell clusters

    Science.gov (United States)

    Rhoads, James E.; Gott, J. Richard, III; Postman, Marc

    1994-01-01

    We study the topology of large-scale structure through a genus curve measurement of the recent Abell catalog redshift survey of Postman, Huchra, and Geller (1992). The structure is found to be spongelike near median density and to exhibit isolated superclusters and voids at high and low densities, respectively. The genus curve shows a slight shift toward 'meatball' topology, but remains consistent with the hypothesis of Gaussian random phase initial conditions. The amplitude of the genus curve corresponds to a power-law spectrum with index n = 0.21-0.47+0.43 on scales of 48/h Mpc or to a cold dark matter power spectrum with omega h = 0.36-0.17+0.46.

  1. Differential geometry of curves and surfaces

    CERN Document Server

    Banchoff, Thomas F

    2010-01-01

    Students and professors of an undergraduate course in differential geometry will appreciate the clear exposition and comprehensive exercises in this book that focuses on the geometric properties of curves and surfaces, one- and two-dimensional objects in Euclidean space. The problems generally relate to questions of local properties (the properties observed at a point on the curve or surface) or global properties (the properties of the object as a whole). Some of the more interesting theorems explore relationships between local and global properties. A special feature is the availability of accompanying online interactive java applets coordinated with each section. The applets allow students to investigate and manipulate curves and surfaces to develop intuition and to help analyze geometric phenomena.

  2. Experimental simulation of closed timelike curves.

    Science.gov (United States)

    Ringbauer, Martin; Broome, Matthew A; Myers, Casey R; White, Andrew G; Ralph, Timothy C

    2014-06-19

    Closed timelike curves are among the most controversial features of modern physics. As legitimate solutions to Einstein's field equations, they allow for time travel, which instinctively seems paradoxical. However, in the quantum regime these paradoxes can be resolved, leaving closed timelike curves consistent with relativity. The study of these systems therefore provides valuable insight into nonlinearities and the emergence of causal structures in quantum mechanics--essential for any formulation of a quantum theory of gravity. Here we experimentally simulate the nonlinear behaviour of a qubit interacting unitarily with an older version of itself, addressing some of the fascinating effects that arise in systems traversing a closed timelike curve. These include perfect discrimination of non-orthogonal states and, most intriguingly, the ability to distinguish nominally equivalent ways of preparing pure quantum states. Finally, we examine the dependence of these effects on the initial qubit state, the form of the unitary interaction and the influence of decoherence.

  3. Design fatigue curve for Hastelloy-X

    International Nuclear Information System (INIS)

    Nishiguchi, Isoharu; Muto, Yasushi; Tsuji, Hirokazu

    1983-12-01

    In the design of components intended for elevated temperature service as the experimental Very High-Temperature gas-cooled Reactor (VHTR), it is essential to prevent fatigue failure and creep-fatigue failure. The evaluation method which uses design fatigue curves is adopted in the design rules. This report discussed several aspects of these design fatigue curves for Hastelloy-X (-XR) which is considered for use as a heat-resistant alloy in the VHTR. Examination of fatigue data gathered by a literature search including unpublished data showed that Brinkman's equation is suitable for the design curve of Hastelloy-X (-XR), where total strain range Δ epsilon sub(t) is used as independent variable and fatigue life Nsub(f) is transformed into log(log Nsub(f)). (author)

  4. The genus curve of the Abell clusters

    Science.gov (United States)

    Rhoads, James E.; Gott, J. Richard, III; Postman, Marc

    1994-01-01

    We study the topology of large-scale structure through a genus curve measurement of the recent Abell catalog redshift survey of Postman, Huchra, and Geller (1992). The structure is found to be spongelike near median density and to exhibit isolated superclusters and voids at high and low densities, respectively. The genus curve shows a slight shift toward 'meatball' topology, but remains consistent with the hypothesis of Gaussian random phase initial conditions. The amplitude of the genus curve corresponds to a power-law spectrum with index n = 0.21(sub -0.47 sup +0.43) on scales of 48/h Mpc or to a cold dark matter power spectrum with omega h = 0.36(sub -0.17 sup +0.46).

  5. Deep-learnt classification of light curves

    DEFF Research Database (Denmark)

    Mahabal, Ashish; Gieseke, Fabian; Pai, Akshay Sadananda Uppinakudru

    2017-01-01

    is to derive statistical features from the time series and to use machine learning methods, generally supervised, to separate objects into a few of the standard classes. In this work, we transform the time series to two-dimensional light curve representations in order to classify them using modern deep......Astronomy light curves are sparse, gappy, and heteroscedastic. As a result standard time series methods regularly used for financial and similar datasets are of little help and astronomers are usually left to their own instruments and techniques to classify light curves. A common approach...... learning techniques. In particular, we show that convolutional neural networks based classifiers work well for broad characterization and classification. We use labeled datasets of periodic variables from CRTS survey and show how this opens doors for a quick classification of diverse classes with several...

  6. Energy efficiency and load curve impacts

    International Nuclear Information System (INIS)

    Feilberg, Nicolai

    2002-01-01

    One of SINTEF Energy Research's European RTD projects is the two-year EFFLOCOM (Energy EFFiciency and LOad curve impacts of COMmercial development in competitive markets). This project will determine the end-user response of different market-related services offered in deregulated power markets. The project will investigate the possibility of influencing load curves by using different price signals and two-way communications via Internet. The partners are from Denmark. Finland, England, France and Norway. SINTEF Energy Research is in charge of the project management. During the project, the changes in load curves will he studied in the in the participating countries before and after deregulation. Specific issues are the use of ICT, time- and situation-dependent tariffs and smart-house technology. The project will consist of 5 work packages that will give recommendations about new methods, guidelines and tools to promote effective use of energy in the partner countries. The total budget is EUR 692 000. (author)

  7. Trend curve data development and testing

    International Nuclear Information System (INIS)

    McElroy, W.N.; Gold, R.; Simons, R.L.; Roberts, J.H.

    1986-01-01

    Existing trend curves do not account for previous and more recently observed test and power reactor flux-level, thermal neutron and γ-ray field-induced effects. Any agreement between measured data and trend curve predictions that does not adequately represent the important neutron environmental and temperature effects as well as the microstructural damage processes, therefore, could be fortuitous. Empirically derived end-of-life (EOL) and life-extension-range (LER) trend curves are presented and discussed in this paper for high temperature [∼288 0 C (550 0 F)] irradiation of two weld, two plate, and two forging pressure vessel (PV) steels and low-temperature [∼60 0 C (140 0 F)] irradiation of one support structure-type steel

  8. Minimal families of curves on surfaces

    KAUST Repository

    Lubbes, Niels

    2014-11-01

    A minimal family of curves on an embedded surface is defined as a 1-dimensional family of rational curves of minimal degree, which cover the surface. We classify such minimal families using constructive methods. This allows us to compute the minimal families of a given surface.The classification of minimal families of curves can be reduced to the classification of minimal families which cover weak Del Pezzo surfaces. We classify the minimal families of weak Del Pezzo surfaces and present a table with the number of minimal families of each weak Del Pezzo surface up to Weyl equivalence.As an application of this classification we generalize some results of Schicho. We classify algebraic surfaces that carry a family of conics. We determine the minimal lexicographic degree for the parametrization of a surface that carries at least 2 minimal families. © 2014 Elsevier B.V.

  9. Energy and GHG abatement cost curves

    Energy Technology Data Exchange (ETDEWEB)

    Alvarenga, Rafael [BHP Billiton Base Metals (Australia)

    2010-07-01

    Global warming due to various reasons but especially to emission of green house gases (GHGs) has become a cause for serious concern. This paper discusses the steps taken by BHP Billiton to reduce energy consumption and GHG emissions using cost curves. According to forecasts, global warming is expected to impact Chile badly and the rise in temperature could be between 1 and more than 5 degrees Celsius. Mining in Chile consumes a lot of energy, particularly electricity. Total energy and electricity consumption in 2007 was 13 and 36 % respectively. BHP base metals developed a set of abatement cost curves for energy and GHG in Chile and these are shown in figures. The methodology for the curves consisted of consultant visits to each mine operation. The study also includes mass energy balance and feasibility maps. The paper concludes that it is important to evaluate the potential for reducing emissions and energy and their associated costs.

  10. POSSIBLE RECESSION CURVE APPLICATIONS FOR RETENTION EVALUATION

    Directory of Open Access Journals (Sweden)

    Daniel Liberacki

    2015-11-01

    Full Text Available The objective of the article was to present possible applications of recession flow curve in a small lowland watershed retention discharge size evaluation. The examined woodland micro catchment area of 0.52 sq km is located in Puszcza Zielonka in central Wielkopolska. The Hutka catchment is typically woody with high retention abilities. The catchment of the Hutka watercourse is forested in 89%, the other 11% is covered by swamps and wasteland. The predominant sites are fresh mixed coniferous forest (BMśw, fresh coniferous forest (Bśw and alder carr forest (Ol. Landscape in catchment is characterized by a large number of interior depressions, filled partly with rainwater or peatbogs, with poorly developed natural drainage. The watercourses do not exceed 1 km in length, the mean width is approx. 0.5 m, while mean depth ranges from 0.2 to 0.3 m. During hydrological research conducted in 1997/1998–1999/2000, 35 major (characteristic raised water stages were observed in Hutka after substantial precipitation. The recession curve dating from 18–24 September 2000 has the α and n rates nearest to average. Comparing the model curve and the curve created by observing watercourse flow, one can notice their resemblance and that they have similar ordinate values as well as shape. In the case of other recession curves, the maximum differences of ordinate values are also about 0.1–0.2 l/s/km2. The measuured α and n rates do not reveal any regularities. There are no significant statistical Horton model parameter (for recession flow curves dependencies between α and n and e.g. initial flows (Qo or the whole period of high water waves (Qp. Consequently, calculated relation between these parameters is only an approximation for the general evaluation of the retention discharge in the catchment area towards retention with flow function.

  11. Analisis Energi dan Sebaran Suhu pada Gasifier Unggun Tetap

    Directory of Open Access Journals (Sweden)

    Yogi Sirodz Gaos

    2007-06-01

    Full Text Available Performance test of Imbert Downdraft Gesifier by using cyclone as an auxiliary for tar filtering has been conducted with three kinds of feeding chips, i. e; borneo wood, tamarind wood and leucena wood. The research has been developed to support as an energy source for combined heat power generation. Gesifier will be coupled to diesel generating set and waste heat from the exhaust gas will be used as energy source for an adsorption type refrigeration system. The test had produced the best combustible gas with the chemical composition CO = 55,59 %, CH4 = 0,14 %, C2H6 = 0,3 % and C3H8= 0, 08 %. The maximum temperature 1142 oC has been found in oxidation zone based on the leucena wood test, meanwhile the calculation result of energy availability for the combustible gas was 60,39 kW and specific energy availability was 0,082 kg/kWh. The test result of temperature distribution along the reactor compare to numerical solution of mathemathicai modelling has got the similar curve.

  12. Analisis hubungan prestasi akademik mahasiswa dengan akses sumber informasi

    Directory of Open Access Journals (Sweden)

    Prijana Prijana

    2018-06-01

    Full Text Available Introduction. In the process of reading, students require different information sources to increase their academic achievement. This paper aims to examine information sources which have a relationship with students academic achievement and become a reference in the development of information sources to support student academic achievement. Method. The research used an experimental study, with N = 38. Based on the value of chi-square of 11,613, a P-value of 0.169 with α = 0.25; df = 8, and the chi-quadrat table = 10.2. It showed that  chi-quadrat count (11.6 is more than chi-quadrat table (10.2. If chi-quadrat counts more than chi-quadrat table, the student academic achievement  has a significant relationship with access to information sources. Results and Discussions. The results showed that students' academic achievements have a significant relationship with access to information sources. The behavior of students in accessing information sources had moderate degrees of relationship with their academic achievement, which means that there is no dominant information source used by the students related to their academic achievement. Conclusion. In this study, students prefer to choose multi-acsess information resources, resulting in the spread of the values of the normal curve to the shape of academic achievements. Further research should discuss students' reading ability towards  the use of information sources.

  13. Fractal properties of critical invariant curves

    International Nuclear Information System (INIS)

    Hunt, B.R.; Yorke, J.A.; Khanin, K.M.; Sinai, Y.G.

    1996-01-01

    We examine the dimension of the invariant measure for some singular circle homeomorphisms for a variety of rotation numbers, through both the thermodynamic formalism and numerical computation. The maps we consider include those induced by the action of the standard map on an invariant curve at the critical parameter value beyond which the curve is destroyed. Our results indicate that the dimension is universal for a given type of singularity and rotation number, and that among all rotation numbers, the golden mean produces the largest dimension

  14. Trend curve data development and testing

    International Nuclear Information System (INIS)

    McElroy, W.N.; Gold, R.; Simons, R.L.; Roberts, J.H.

    1986-08-01

    Existing trend curves do not account for previous and more recently observed test and power reactor flux-level, thermal neutron and gamma-ray field-induced effects. Any agreement between measured data and trend curve predictions that does not adequately represent the important neutron environmental and temperature effects as well as the microstructural damage processes, therefore, could be fortuitous. Two principal questions asked concerning the metallurgical condition of the pressure vessel and its support structures are: What are the controlling variables; and What effects do they have on changing the metallurgical properties of the vessel and its support structures throughout their lifetimes

  15. Linear Titration Curves of Acids and Bases.

    Science.gov (United States)

    Joseph, N R

    1959-05-29

    The Henderson-Hasselbalch equation, by a simple transformation, becomes pH - pK = pA - pB, where pA and pB are the negative logarithms of acid and base concentrations. Sigmoid titration curves then reduce to straight lines; titration curves of polyelectrolytes, to families of straight lines. The method is applied to the titration of the dipeptide glycyl aminotricarballylic acid, with four titrable groups. Results are expressed as Cartesian and d'Ocagne nomograms. The latter is of a general form applicable to polyelectrolytes of any degree of complexity.

  16. From Curve Fitting to Machine Learning

    CERN Document Server

    Zielesny, Achim

    2011-01-01

    The analysis of experimental data is at heart of science from its beginnings. But it was the advent of digital computers that allowed the execution of highly non-linear and increasingly complex data analysis procedures - methods that were completely unfeasible before. Non-linear curve fitting, clustering and machine learning belong to these modern techniques which are a further step towards computational intelligence. The goal of this book is to provide an interactive and illustrative guide to these topics. It concentrates on the road from two dimensional curve fitting to multidimensional clus

  17. Phonon dispersion curves for CsCN

    International Nuclear Information System (INIS)

    Gaur, N.K.; Singh, Preeti; Rini, E.G.; Galgale, Jyostna; Singh, R.K.

    2004-01-01

    The motivation for the present work was gained from the recent publication on phonon dispersion curves (PDCs) of CsCN from the neutron scattering technique. We have applied the extended three-body force shell model (ETSM) by incorporating the effect of coupling between the translation modes and the orientation of cyanide molecules for the description of phonon dispersion curves of CsCN between the temperatures 195 and 295 K. Our results on PDCs in symmetric direction are in good agreement with the experimental data measured with inelastic neutron scattering technique. (author)

  18. Bound states in curved quantum waveguides

    International Nuclear Information System (INIS)

    Exner, P.; Seba, P.

    1987-01-01

    We study free quantum particle living on a curved planar strip Ω of a fixed width d with Dirichlet boundary conditions. It can serve as a model for electrons in thin films on a cylindrical-type substrate, or in a curved quantum wire. Assuming that the boundary of Ω is infinitely smooth and its curvature decays fast enough at infinity, we prove that a bound state with energy below the first transversal mode exists for all sufficiently small d. A lower bound on the critical width is obtained using the Birman-Schwinger technique. (orig.)

  19. Strange Curves, Counting Rabbits, & Other Mathematical Explorations

    CERN Document Server

    Ball, Keith

    2011-01-01

    How does mathematics enable us to send pictures from space back to Earth? Where does the bell-shaped curve come from? Why do you need only 23 people in a room for a 50/50 chance of two of them sharing the same birthday? In Strange Curves, Counting Rabbits, and Other Mathematical Explorations, Keith Ball highlights how ideas, mostly from pure math, can answer these questions and many more. Drawing on areas of mathematics from probability theory, number theory, and geometry, he explores a wide range of concepts, some more light-hearted, others central to the development of the field and used dai

  20. Boiling curve in high quality flow boiling

    International Nuclear Information System (INIS)

    Shiralkar, B.S.; Hein, R.A.; Yadigaroglu, G.

    1980-01-01

    The post dry-out heat transfer regime of the flow boiling curve was investigated experimentally for high pressure water at high qualities. The test section was a short round tube located downstream of a hot patch created by a temperature controlled segment of tubing. Results from the experiment showed that the distance from the dryout point has a significant effect on the downstream temperatures and there was no unique boiling curve. The heat transfer coefficients measured sufficiently downstream of the dryout point could be correlated using the Heineman correlation for superheated steam, indicating that the droplet deposition effects could be neglected in this region

  1. Light Curve Analysis of SAO23229

    Directory of Open Access Journals (Sweden)

    Ho-Il Kim

    1993-06-01

    Full Text Available We have made UBV light curves of a newly discovered eclipsing binary, SAO23229 at Sobaeksan Astronomy Observatory. We determined a minimum light time of HJD2448636.1170+/-0.0005 that is 3 minutes later than predicted time, and founda peculiar light variation at phase 0.75 that may not be secondary eclipse. Orbital period of SAO23229 would be 4.2 days rather than 2.1 days. Our analysis of the light curves shows that SAO23229 has a detached configuration consisting of two almost identical F type main sequence stars.

  2. Analysis of characteristic performance curves in radiodiagnosis by an observer

    International Nuclear Information System (INIS)

    Kossovoj, A.L.

    1988-01-01

    Methods and ways of construction of performance characteristic curves (PX-curves) in roentgenology, their qualitative and quantitative estimation are described. Estimation of PX curves application for analysis of scintigraphic and sonographic images is presented

  3. a new approach of Analysing GRB light curves

    International Nuclear Information System (INIS)

    Varga, B.; Horvath, I.

    2005-01-01

    We estimated the T xx quantiles of the cumulative GRB light curves using our recalculated background. The basic information of the light curves was extracted by multivariate statistical methods. The possible classes of the light curves are also briefly discussed

  4. Flowing equation gradually varied in rectangles channels on depth curve; Ecuacion del flujo gradualmente variado en canales rectangulares de fondo curvo

    Energy Technology Data Exchange (ETDEWEB)

    Sotelo-Avila, G.; Gallegos-Silva, J. [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2002-03-01

    The study of channel flow usually have its basis in the hydrostatic distribution of pressure and the rectilinear flow hypotheses. It is from this hypothesis that the main flow equations are obtained. However, this is not applicable to a vertically curved flow that is present in a curved bed channel. This kind of channel is used to join two different slopes or in ski jumps. This kind of flow presents several changes from the rectilinear flow as in the velocity and pressure distributions and even in the energy loses. The authors of this article propose an equation of gradually varied flow for vertically-curved bed rectangular channels that adds a coefficient to modify the velocity in the calculus of the local friction gradient. With these results is possible now to analyze flow profiles in vertically-curved bed channels where before were used the methods for straight channels and therefore, increase accuracy. [Spanish] Las hipotesis del movimiento rectilineo y de distribucion hidrostatica de la presion son ciertamente las mas importantes en la hidraulica de canales, y de ellas se derivan los principales modelos de flujo que usualmente emplean. Sin embargo, no es valido aplicar la misma hipotesis y metodos de analisis al flujo curvilineo, que ocurre cuando el canal adopta curvaturas verticales en el fondo, las cuales inducen cambios importantes en la distribucion de la velocidad, presion y hasta en la perdida d energia. Tal es el caso de canales que contienen curvas verticales para unir tramos de distintas pendientes y producir el cambio en la direccion del flujo en cubetas deflectoras y vertedores en tunel. Los autores de este articulo proponen una ecuacion de flujo gradualmente variado en canales rectangulares de fondo curvo, esta es de gran utilidad en la determinacion del perfil del flujo con dichas caracteristicas, donde se plantea la adicion de un factor de amplificacion de la velocidad en el calculo del gradiente local de friccion, para tomar en cuenta el

  5. Analisis interferensi T-DAB dan TV Analog pada pita Very High Frequency (VHF

    Directory of Open Access Journals (Sweden)

    Kasmad Ariansyah

    2014-09-01

    Full Text Available Kehadiran teknologi digital telah membawa perubahan di dalam berbagai aspek kehidupan, tak terkecuali di dunia penyiaran. Digitalisasi dibidang penyiaran diyakini dapat memberikan manfaat dalam hal efisiensi spektrum frekuensi radio. Berkaitan dengan penyiaran radio, Menteri  Komunikasi  dan  Informatika telah menetapkan DAB family sebagai standard penyiaran radio digital di Indonesia. Kajian dilakukan untuk mendapatkan jarak minimum yang diperlukan  antara sistem T-DAB dan TV analog sebagai solusi terhadap kemungkinan interferensi. Analisis dilakukan dengan bantuan SEAMCAT. Berdasarkan hasil analisis disimpulkan bahwa  kanal  A  T-DAB  merupakan  kanal yang paling rentan terhadap interferensi; Untuk mencapai probabilitas interferensi maksimum 5%, separasi geograpis minimum antara cakupan terluar TV analog kanal n dan transmitter terluar pada jaringan SFN T-DAB untuk kanal (n- 1D, nA, nB, nC berturut-turut adalah 220 Km, 290 Km, 145 Km dan  40  Km.  Sedangkan  untuk  kanal  nD  dan  (n+1A  dapat dioperasikan tanpa separasi geograpis dengan TV analog.

  6. ANALISIS PSAK NO. 27 TENTANG AKUNTANSI PERKOPERASIAN DAN PENGARUHNYA TERHADAP KESEHATAN USAHA PADA KPRI

    Directory of Open Access Journals (Sweden)

    Muhammad Khafid

    2012-03-01

    Full Text Available Tujuan dari penelitian ini adalah untuk menganalisis kepatuhan penerapan PSAK 27 (Cooperative Accounting, dan untuk menganalisa dampak  kepatuhan penerapan PSAK 27 (Cooperative Accounting  pada pengoperasian kinerja KPRI di kota Semarang. Populasinya adalah 62 KPRI di kota Semarang, dan sempel yang digunakan adalah 29 KPRI. Metode pengumpulan datanya adalah dokumentasi dan kuesioner. Metode analisis data adalah analisis deskriptif  dan statistik inferensial. Hasil penelitian memperlihatkan bahwa KPRI di kotamadya Semarang dikategorikan cukup dan terbukti bahwa hipotesis menyatakan bahwa tingkat kepatuhan penerapan PSAK 27 berpengaruh terhadap pertumbuhan usaha. Abstract The purposes of this research are to analyze the implementation compliance of PSAK 27 (Cooperative Accounting, and to analyze the effects of implementation compliance of PSAK 27 (Cooperative Accounting on KPRI performance  in Semarang Municipality. The population are 62 KPRIs in Semarang.However, there are only twenty nine KPRIs become the samples. The methods for collecting the data are documentation and questionairre. Then, for analyzing the data, it requires descriptive analysis and inferential analysis. The results of study shows that KPRIs in Semarang Municipality are categorized as fair and hypothesis states that the level of implementation compliance of PSAK 27 is influencial to the business has successfully proven.Keywords:  cooperative accounting; compliance

  7. ANALISIS FAKTOR-FAKTOR YANG MEMPENGARUHI KEPUASAN KONSUMEN BERBELANJA ONLINE DI PROVINSI PULAU JAWA

    Directory of Open Access Journals (Sweden)

    Januar Israhmawan Putra

    2017-11-01

    Full Text Available Penggunaan internet di Indonesia yang tumbuh dengan pesat diikuti dengan banyak ber - munculan situs e-commerce yang merubah budaya dan gaya berbelanja masyarakat menjadi serba online. Pertumbuhan pasar e-commerce ini harus dibarengi dengan pelayanan yang akan diberikan kepada konsumennya secara baik agar konsumen merasa puas ketika bertran - saksi kepada perusahaan. Tujuan penelitian ini yaitu untuk mengetahui faktor apa saja yang mempengaruhi kepuasan konsumen berbelanja online pada situs jual beli Lazada, Zalora, dan Mataharimall. Variabel independent yang digunakan dalam penelitian ini yaitu Website Design, Security, Information Quality, Payment Method, E-service Quality, Product Quality, Product Variety, Delivery Service dan variebel dependent adalah Customer Satisfaction. �e- �e- �e - sponden dalam penelitian ini adalah konsumen Lazada, Zalora, dan Mataharimall yang be - rada di wilayah Provinsi Jawa Barat, Jawa Tengah, dan Jawa Timur dengan jumlah responden sebanyak 400 orang. Teknik sampling yang digunakan adalah nonprobability sampling yaitu porposive sampling. Penelitian ini menggunakan metode kuantitatif dengan teknik analisis data regresi berganda dan teknik analisis deskriptif. Hasil peneltian ini menunjukan bahwa website design, information quality, product vaiety, delivery service berpengaruh signifikan terhadap kepuasan konsumen dalam berbelanja online.

  8. ANALISIS POSISI BERSAING UNTUK MENENTUKAN STRATEGI PEMASARAN INDUSTRI KRIPIK TEMPE DI KOTA MALANG

    Directory of Open Access Journals (Sweden)

    Rusno Rusno

    2014-11-01

    Full Text Available Industri kripik tempe di desa Sanan Malang merupakan bagian dari UMKM mengalami perkembang-an yang cukup baik. Hingga akhir tahun 2013 kemarin berjumlah kurang lebih 65 pengrajin, bahkan saat ini Sanan sudah menjadi sentra industri kecil penghasil kripik tempe dan menjadi salah satu pro-duk unggulan kota Malang. Namun dalam perjalanannya industri ini banyak mengalami masalah diantaranya banyak pesaing yang terus masuk dalam bisnis ini. Hal ini mengakibatkan persaingan yang semakin ketat sehingga para pelaku harus dapat menentukan strategi untuk dapat memenangkan persaingan, maka Tujuan dalam penelitian ini adalah untuk mengetahui bagaimana posisi bersaing dan penetapan strategi pemasaran produsen kripik tempe di kota Malang. Jenis penelitian ini adalah confirmatory research. Sebagai populasinya adalah pengusaha kripik tempe yang berlokasi di kecamatan Blimbing kota Malang yang berjumlah 65 pemilik home industri. Sampel dilakukan dengan teknik Simple random sampling berjumlah 33 pengusaha industri kripik tempe. Pengambilan data dilakukan dengan kuesioner, dan teknik analisis data dengan teknik deskriptif dan tabulasi silang. Berdasarkan analisis data didapatkan hasil penelitian bahwa posisi bersaing industri kripik tempe di Sanan terdapat 4 cluster yang terbagi dalam : Cluster 1 (pemimpin pasar/market leader beranggota-kan 1 perusahaan. Cluster 2(penceruk pasar/market nicher beranggotakan 13 perusahaan, Cluster 3 (penantang pasar/market challenger beranggotakan 8 perusahaan dan cluster 4 (pengikut pasar /market follower beranggotakan 11 perusahaan. 

  9. Analisis Highest and Best Use (HBU pada Lahan Jl. Gubeng Raya No. 54 Surabaya

    Directory of Open Access Journals (Sweden)

    Akmaluddin Akmaluddin

    2013-03-01

    Full Text Available Laju pertumbuhan penduduk dan tingkat perekonomian yang semakin meningkat di  kota-kota besar seperti Surabaya, bertolak belakang dengan  ketersediaan lahan yang terbatas. Selayaknya properti yang akan dibangun di atas suatu lahan dapat memberikan manfaat yang maksimal serta efisien agar hasilnya dapat dirasakan demi pembangunan wilayah tersebut. Oleh karena itu, perlu dilakukan perhitungan  penggunaan yang paling memungkinkan dan diizinkan dari suatu tanah kosong atau tanah yang  sudah dibangun, dimana secara fisik dimungkinkan, didukung atau dibenarkan oleh peraturan, layak secara keuangan dan menghasilkan nilai tertinggi. Dalam penelitian ini dilakukan analisis Highest and Best Use (HBU pada lahan di Jl. Gubeng Raya No. 54 Surabaya seluas 1.150 m2 yang direncanakan akan dibangun hotel. Lahan tersebut berpotensi untuk dikembangkan menjadi properti komersial seperti hotel, apartemen, perkantoran dan pertokoan. Analisis tersebut menggunakan tinjauan terhadap aspek fisik, legal, finansial dan produktivitas maksimumnya. Dari hasil penelitian ini didapatkan alternatif properti komersial hotel yang memiliki penggunaan tertinggi dan terbaik pada pemanfaatan lahan dengan nilai lahan Rp. 67.069.980,31/ m2.

  10. Environmental analysis of natural gas life cycle; Analisi ambientale del ciclo di vita del gas naturale

    Energy Technology Data Exchange (ETDEWEB)

    Riva, A.; D' Angelosante, S.; Trebeschi, C. [Snam SpA, Rome (Italy)

    2000-12-01

    Life Cycle Assessment is a method aimed at identifying the environmental effects connected with a given product, process or activity during its whole life cycle. The evaluation of published studies and the application of the method to electricity production with fossil fuels, by using data from published databases and data collected by the gas industry, demonstrate the importance and difficulties to have reliable and updated data required for a significant life cycle assessment. The results show that the environmental advantages of natural gas over the other fossil fuels in the final use stage increase still further if the whole life cycle of the fuels, from production to final consumption, is taken into account. [Italian] L'analisi del ciclo di vita e' una metodologia che consente di identificare gli effetti ambientali associati ad un prodotto, processo o attivita' lungo il loro ciclo di vita. La valutazione di studi pubblicati e l'applicazione della metodologia alla produzione di energia elettrica da combustibili fossili, utilizzando dati provenienti da banche dati di letteratura e raccolti dall'industria del gas, dimostrano l'importanza e la difficolta' di avere a disposizione dati affidabili ed aggiornati, necessari per un'analisi significativa del ciclo di vita. I risultati mostrano che i vantaggi ambientali del gas naturale rispetto agli altri combustibili fossili nella fase di utilizzo finale, aumentano ulteriormente se si considera l'intero ciclo di vita dei diversi combustibili, dalla produzione al consumo finale.

  11. TUGAS DAN WEWENANG PUSAT PELAPORAN DAN ANALISIS TRANSAKSI KEUANGAN (PPATK DALAM PEMBERANTASAN TINDAK PIDANA PENCUCIAN UANG

    Directory of Open Access Journals (Sweden)

    Johari Johari

    2014-03-01

    Full Text Available Tugas dan wewenang Pusat Pelaporan dan Analisis Transaksi Keuangan (PPATK terdapat di dalam Pasal 26 dan Pasal 27 Undang-Undang No. 25 Tahun 2003 tentang Tindak Pencucian Uang. Berdasarkan ketentuan tersebut, tugas dan wewenang PPATK tersebut bertujuan untuk mendeteksi terjadinya tindak pidana pencucian uang, dan membantu penegakan hukum yang berkaitan dengan pencucian uang, termasuk tindak pidana asal yang melahirkannya (predicate offences. Namun, Peranan PPATK akan berjalan secara efektif apabila aparat penegak hukum seperti Kepolisian, Kejaksaan, Pengadilan, Bea dan Cukai, para regulator seperti Bank Indonesia, Departemen Keuangan, Badan Pengawas Pasar Modal serta Penyedia Jasa Keuangan, industri perbankan, asuransi, perusahaan pembiayaan, dana pensiun, perusahaan efek, pengelola reksadana, media massa, masyarakat bekerjasama secara terorganisir dan terpadu dalam pemberantasan tindak pencucian uang di Indonesia. Dengan kewenangan yang dimilikinya, PPATK dapat mengejar hasil dari kejahatan, apabila hasil kejahatan tersebut dapat dikejar dan disita maka negara dengan sendirinya akan mengurangi tindak kejahatan itu sendiri. Kata kunci : Pencucian uang, tindak pidana pencucian uang (money laundering, kejahatan terorganisir, dan Pusat Pelaporan dan Analisis Transaksi Keuangan (PPATK.

  12. ANALISIS BEBAN KERJA DENGAN MENGGUNAKAN METODE CVL DAN NASATLX DI PT. ABC

    Directory of Open Access Journals (Sweden)

    Renty Anugerah Mahaji Puteri

    2017-10-01

    Full Text Available PT. ABC merupakan perusahaan Jepang yang bergerak di bidang usaha jasa konstruksi mekanikal, elektrikal, dan system komunikasi. Sebagai perusahaan jasa konstruksi, PT. ABC dituntut untuk mencapai tujuan / target perusahaan tiap tahunnya yaitu mendapatkan tender proyek, maka tak jarang karyawannya dituntut untuk lembur. Seringnya karyawan lembur, maka menimbulkan masalah kelelahan terhadap para karyawannya sehingga target tidak tercapai. Penelitian ini bertujuan untuk mengevaluasi beban kerja yang dialami oleh engineer leader pada Departemen DesaindanOperasional di PT. ABC. Beban kerja yang diukur adalah beban kerja fisik dan mental. Beban kerja fisik diukur berdasarkan cardiovascular load (CVL. Beban kerja mental diukur dengan menggunakan metode NASA-Task Load Index (NASA-TLX. Berdasarkan hasil analisis CVL, beban kerja fisik yang diterima engineer proyek memiliki presentase CVL sebesar 31,16%, denganhasilperbaikanmenjadi 23,38%. Sedangkan dari hasil analisis NASA-TLX, beban kerja mental yang diterima engineer proyek yaitu dengan skor NASA-TLX 74,2% denganhasilperbaikanmenjadi 51,6%, sedangkan skor NASA-TLX engineer head office 61,5% denganhasilperbaikanmenjadi 47,66%.

  13. ANALISIS DEREPLIKASI UNTUK IDENTIFIKASI SENYAWA ANTIBAKTERI SPONGE Axinella sp. DARI PERAIRAN KEPULAUAN KARIMUNJAWA

    Directory of Open Access Journals (Sweden)

    Hedi Indra Januar

    2009-06-01

    Full Text Available Riset ini bertujuan untuk mengidentifikasi senyawa antibakteri pada Axinella sp. yang diambil dari kepulauan Karimunjawa dengan metode dereplikasi menggunakan LCMS (Liquid Chromatography Mass Spectrometer dan FT-MS (Fourier Transfer Mass Spectrometer. Data pola spektra massa dan LC-MS menunjukkan adanya tiga senyawa terbrominasi yang mungkin memiliki bioakfivitas antibakteri. Analisis massa akurat (limit kesalahan di bawah 20 ppm menggunakan FT-MS menemukan bahwa ketiga senyawa tersebut memliki monosotop negatif (M-H pada m/z 321,9931 [senyawa (a]; m/z 383,9089 [senyawa (b]; dan m/z 385,9249 [senyawa (c]. Analisis komposisi kimia dari besaran massa tersebut yang menggunakan Elemental Composition Calculator menemukan bahwa komposisi kimia dari ketiga senyawa tersebut adalah C11H10N5O2Br (a, C11H9N5Br2 (b dan C11H11Br2N5O (c. Penelusuran struktur kima yang didasarkan pada komposisi tersebut di database MarinLit 2008 (Database struktur kimia senyawa-senyawa dari biota laut menemukan bahwa ketiga senyawa tersebut merupakan hymeniadisine (a, 3-bromohymenialdiside (b, dan dibromophakelin (c.

  14. Analisis Daya Saing untuk Meningkatkan Kualitas Layanan terhadap Pelanggan dengan Pendekatan CRM di CV. BLITZSPOT

    Directory of Open Access Journals (Sweden)

    Suryadi Muhammad

    2017-04-01

    Full Text Available CV. Blitzspot adalah perusahaan yang bergerak di bidang jasa penyediaan layanan internet (internet service provider, yang berkantor pusat di Komplek Padasuka Indah Ruko Blok A-1, Cimahi, Jawa Barat. Berdasarkan hasil wawancara dan hasil observasi pada data transaksi CV. Blitzspot, konsumen CV. Blitzspot yang melakukan transaksi tiap tahunnya selalu berkurang, hal ini dikarenakan konsumen sering membandingkan layanan-layanan yang ditawarkan oleh para pesaing CV. Blitzspot. Bila permasalahan tersebut belum teratasi, konsumen CV. Blitzspot akan menurun tiap tahunnya dan akan selalu berpindah ke pesaing CV. Blitzspot. Direktur Utama CV. Blitzspot ingin menganalisis daya saing untuk menentukan layanan-layanan yang akan diberikan kepada pelanggan CV. Blitzspot dan penentuan strategi untuk mempertahankan konsumen CV. Blitzspot.  Metode Analisis daya saing yang digunakan adalah Model Analisis Berlian Porter dan Metode Pengelompokkan Pelanggan yang digunakan adalah Metode LRFM. Berdasarkan hasil pengujian dan pembahasan yang telah dibuat, maka dapat ditarik kesimpulan bahwa Direktur Utama dapat menganalisis daya saing CV. Blitzspot dengan menggunakan Berlian Porter untuk meningkatkan kualitas layanan terhadap pelanggan CV. Blitzspot.

  15. ANALISIS SUMBER-SUMBER KEBERMAKNAAN HIDUP NARAPIDANA YANG MENJALANI HUKUMAN SEUMUR HIDUP

    Directory of Open Access Journals (Sweden)

    Siska Marliana

    2012-04-01

    Full Text Available Narapidana yang mendapat hukuman seumur hidup akan mengalami perubahan besar dalam kehidupannya, seperti keterbatasan dalam melakukan aktivitas, pekerjaan, kehidupan sosial bahkan dalam tujuan hidup. Kondisi tersebut akan  mengubah pandangannya mengenai makna dari hidupnya ataupun mengalami ketidakbermaknaan hidup. Fokus penelitian ini adalah analisis sumber-sumber kebermaknaan hidup pada narapidana yang divonis hukuman seumur hidup dengan mengacu pada konsep kebermaknaan hidup Viktor Frankl. Penelitian ini merupakan penelitian kualitatif dengan pendekatan studi kasus pada seorang narapidana di Lembaga Pemasyarakatan Klas 1 Sukamiskin Bandung yang sudah menjalani dua tahun masa hukuman dari vonis hukuman seumur hidup atas kasus pembunuhan. Teknik pengambilan data dilakukan dengan wawancara, observasi dan analisis dokumen. Hasil penelitian ini menunjukkan bahwa sumber-sumber kebermaknaan hidup bagi subjek adalah : 1.  Adanya nilai-nilai kreatif (creative values untuk dapat berkarya, bekerja, mencipta serta melaksanakan tugas dan kewajiban sebaik-baiknya. 2. Adanya nilai-nilai penghayatan (experiential values, yakni dengan cara memperoleh pengalaman tentang sesuatu atau seseorang yang bernilai bagi subjek. 3. Nilai-nilai bersikap (attitudinal values atas hukuman seumur hidup yaitu subjek memilih sikap menerima kondisi tersebut sebagai tanggung jawab yang harus dijalani akibat perbuatannya dan berusaha menikmati kehidupan di penjara dengan menjadikan penjara sebagai tempat untuk belajar menjadi manusia yang lebih baik. Kata Kunci: hukuman seumur hidup, sumber-sumber kebermaknaan hidup, creative values, experiential values, attitudinal values

  16. ANALISIS SOAL JENJANG KOGNITIF TAKSONOMI BLOOM REVISI PADA BUKU SEKOLAH ELEKTRONIK (BSE BIOLOGI SMA

    Directory of Open Access Journals (Sweden)

    Aa Juhanda

    2016-11-01

    Penelitian ini bertujuan untuk menganalisis kemunculan soal jenjang kognitif Bloom Revisi pada Buku Sekolah Elektronik (BSE Biologi SMA. Subjek penelitian adalah 1.650 soal yang terdapat pada BSE Edisi 2009. Instrumen yang digunakan adalah lembar analisis dokumen yang di dalamnya memuat informasi seperti kode soal, soal, dan jenis tingkatan kognitif taksonomi Bloom Revisi. Analisis data dilakukan secara kuantitatif dan kualitatif. Hasil penelitian menunjukkan bahwa rerata persentase kemunculan cukup tinggi diperoleh pada soal yang mengembangkan keterampilan berpikir tingkat rendah (Lower-Order Thinking Skills yaitu soal C1 (mengingat sebesar 46,60% dan C2 (memahami sebesar 47,99%, meskipun untuk C3 (menerapkan persentasenya masih rendah (0,28%. Rerata persentase kemunculan soal yang mengembangkan keterampilan tingkat tinggi (Higher-Order Thinking Skills mulai dari soal C4 (menganalisis sampai dengan C6 (mencipta memiliki rerata persentase yang rendah. Oleh karena itu, kemunculan soal jenjang kognitif Bloom Revisi pada BSE khususnya yang mengembangkan Higher-Order Thinking Skills masih perlu untuk ditingkatkan.

  17. Analisis Potensi Ledakan dan Kebakaran Primary Reformer sebagai Unit Proses Produksi Amonia di PT. X

    Directory of Open Access Journals (Sweden)

    Resti Ayu Lestari

    2016-12-01

    Full Text Available Peningkatan industri pupuk di dunia berimplikasi pada peningkatan jumlah industri amonia. Amonia memegang peranan penting pada proses produksi pupuk dalam hal penyediaan nitrogen. Proses pembuatan amonia melibatkan bahan baku berupa gas alam yang bersifat flammable dengan temperatur dan tekanan yang tinggi dalam setiap tahapan prosesnya. Primary reformer merupakan salah satu peralatan proses dalam produksi amonia dengan temperatur dan tekanan paling tinggi serta paling berisiko mengalami kegagalan yang dapat mengakibatkan terjadinya kebakaran/ledakan. Primary reformer berperan sebagai salah satu tahapan pemurnian gas alam dengan hasil berupa karbon monoksida. Identifikasi bahaya pada unit primary reformer dilakukan dengan menggunakan metode Fault Tree Analysis (FTA. Hasil analisis FTA menghasilkan bahwa sumber bahaya dari ledakan primary reformer dapat ditinjau dari faktor teknis dan faktor non teknis. Faktor non teknis menyumbang 74% dari penyebab terjadinya ledakan/kebakaran pada primary reformer. Hasil analisis risiko ledakan/kebakaran pada primary reformer dilakukan dengan menggunakan Dow’s Fire & Explosion Index  dengan hasil radius area dampak adalah 51 meter. Nilai kerugian finansial mencapai US$ 23.640.285 dengan kerugian hari kerja minimal adalah 138 hari. Perangkat lunak Arial Location of Hazardous Atmospheres menghasilkan radius ledakan dengan dampak terkecil yaitu dapat memecahkan kaca jendela/pintu (0,5 psi adalah 73 m dari primary reformer. Radius ledakan dengan kekuatan ledakan 1 psi (meruntuhkan rumah/perkantoran adalah 48 m dari primary reformer.

  18. ANALISIS CURAH HUJAN PANTAI BARAT SUMATERA BAGIAN UTARA PERIODE 1994-2007

    Directory of Open Access Journals (Sweden)

    Indra Gustari

    2009-07-01

    Full Text Available Dari data curah hujan di pantai barat Sumatera bagian utara dilakukan analisis spektrum daya untuk mengetahui pola curah hujan di daerah tersebut, selanjut dilihat hubungannya dengan intensitas monsun,  Indian Ocean Dipole Mode (IODM dan El-Nino Southern Oscillation (ENSO. Hasil analisis menunjukkan bahwa pola curah hujan di pantai barat Sumatera bagian utara memiliki dua puncak dan sangat dipengaruhi oleh faktor cuaca dengan dengan osilasi satu tahunan (annual oscillation, dan setengah tahunan (semi-annual oscillation dan ditemukan hubungan yang kuat antara variabilitas monsun dan IODM. Pola hujan didaerah ini tidak memperlihatkan pengaruh ENSO.   The data of Rainfall in the west coast of northern Sumatera were analyzed through power spectrum analyzer to find out the rainfall pattern in that area and to look at the relationship between rainfall pattern and monsoon intensity, Indian Ocean Dipole Mode (IODM and El-Nino Southern Oscillation (ENSO. The result of this analysis shows that the main rainfall pattern in the west coast of northern Sumatera has two peaks and is very much influenced by the factor of weather with annual oscillation and semi-annual oscillation, there is a strong relationship between monsoon variability and IODM, and the influence of ENSO on the rainfall in this region is not significant.

  19. Analisis Struktur Kristal Lifepo4 Olivine Sebagai Bahan Katoda Batere Li-Ion

    Directory of Open Access Journals (Sweden)

    Indra Gunawan

    2013-10-01

    Full Text Available Sintesis LiFePO4 dilakukan dengan pencampuran LiCl, FeCl2.4H2O dan H3PO4 ekuimolar ke dalam air. Homogenasi larutan dilakukan dengan pengaduk magnetic pada suhu 60o C. Prekursor LiFePO4 diperoleh setelah pemanasan 200o C dengan furnace selama 2 jam. Sintering prekursor LiFePO4 dilakukan pada suhu 700o C dengan furnace selama 4 jam dengan aliran N2 untuk membentuk fasa kristalit LiFePO4. Kemurnian fasa dan struktur kristal dianalisis dengan menggunakan XRD. Analisis struktur kristal dari pola difraksi sinar-X dilakukan dengan perangkat lunak FULLPROF. Pengamatan morfologinya dilakukan dengan menggunakan SEM dengan kombinasi energy dispersive spectroscopy (EDS dan pengukuran gugus fungsional dengan FT-IR. Hasil analisis struktur kristal menunjukkan bahwa senyawa LiFePO4 memiliki struktur Kristal orthorhombic, space group 62, simbol Pnma (Hermann-Mauguin dengan parameter kisi a= 6.0019999, b= 10.330000, c= 4.6999998. 

  20. ANALISIS POSTUR KERJA PADA PT. XYZ MENGGUNAKAN METODE ROSA (RAPID OFFICE STRAIN ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Rosma Hani Damayanti

    2014-06-01

    Full Text Available Penggunaan teknologi informasi, dimana komputer sebagai medianya kini semakin meningkat. Frekuensi yang tinggi akan penggunaan komputer yang tidak memperhatikan sisi ergonomi dalam bekerja mengakibatkan adanya resiko yang dirasakan oleh pengguna. PT. XYZ merupakan salah satu perusahaan yang menggunakan komputer sebagai salah satu alat utama dalam bekerja. Pada penggunaannya karyawan pada Departemen Publishing merasakan keluhan pada punggung, pinggang, nyeri bahu, leher dan tangan. Keluhan yang dirasakan oleh pekerja pada Departemen publishing dapat diminimalkan dengan cara mengetahui dan mengidentifikasi postur kerja pada pekerja dalam menggunakan komputer. Identifikasi tersebut digunakan untuk mengetahui kondisi pekerja dan mengetahui penyebab keluhan yang dirasakan oleh pekerja untuk dilakukan perbaikan. Pada penelitian ini dilakukan analisis dengan menggunakan metode ROSA untuk mengurangi adanya keluhan yang dirasakan oleh pekerja pada Departemen publishing. ROSA merupakan salah satu metode pada office ergonomics, dimana penilaiannnya dirancang untuk mengukur resiko yang terkait dengan penggunaan komputer serta untuk menetapkan tingkat tindakan perubahan berdasarkan laporan dari ketidaknyamanan pekerja. Dengan menggunakan metode ROSA, dapat diketahui apakah postur kerja karyawan pada Departemen Publishing pada saat bekerja aman atau berbahaya. Hasil analisis postur kerja menggunakan metode ROSA pada Departemen Publishing menunjukkan bahwa seluruh pekerja yang menjadi sampel memiliki level resiko yang tinggi dan perlu dilakukan perbaikan segera. Perbaikan yang dapat dilakukan untuk mengurangi tingkat resiko yang dirasakan oleh pekerja yaitu dengan perbaikan fasilitas yang digunakan oleh pekerja yang sesuai dengan standar ergonomi, melakukan sosialisasi kepada pekerja tentang pentingnya ergonomi pada dunia kerja, dan sebaiknya pekerja melakukan istirahat atau peregangan otot minimal setiap tiga jam sekali.

  1. ANALISIS POSTUR KERJA PADA PT. XYZ MENGGUNAKAN METODE ROSA (RAPID OFFICE STRAIN ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Rosma Hani Damayanti

    2014-06-01

    Full Text Available Penggunaan teknologi informasi, dimana komputer sebagai medianya kini semakin meningkat. Frekuensi yang tinggi akan penggunaan komputer yang tidak memperhatikan sisi ergonomi dalam bekerja mengakibatkan adanya resiko yang dirasakan oleh pengguna. PT. XYZ merupakan salah satu perusahaan yang menggunakan komputer sebagai salah satu alat utama dalam bekerja. Pada penggunaannya karyawan pada Departemen Publishing merasakan keluhan pada punggung, pinggang, nyeri bahu, leher dan tangan. Keluhan yang dirasakan oleh pekerja pada Departemen publishing dapat diminimalkan dengan cara mengetahui dan mengidentifikasi postur kerja pada pekerja dalam menggunakan komputer. Identifikasi tersebut digunakan untuk mengetahui kondisi pekerja dan mengetahui penyebab keluhan yang dirasakan oleh pekerja untuk dilakukan perbaikan. Pada penelitian ini dilakukan analisis dengan menggunakan metode ROSA untuk mengurangi adanya keluhan yang dirasakan oleh pekerja pada Departemen publishing. ROSA merupakan salah satu metode pada office ergonomics, dimana penilaiannnya dirancang untuk mengukur resiko yang terkait dengan penggunaan komputer serta untuk menetapkan tingkat tindakan perubahan berdasarkan laporan dari ketidaknyamanan pekerja. Dengan menggunakan metode ROSA, dapat diketahui apakah postur kerja karyawan pada Departemen Publishing pada saat bekerja aman atau berbahaya. Hasil analisis postur kerja menggunakan metode ROSA pada Departemen Publishing menunjukkan bahwa seluruh pekerja yang menjadi sampel memiliki level resiko yang tinggi dan perlu dilakukan perbaikan segera.  Perbaikan yang dapat dilakukan untuk mengurangi tingkat resiko yang dirasakan oleh pekerja yaitu dengan perbaikan fasilitas yang digunakan oleh pekerja yang sesuai dengan standar ergonomi, melakukan sosialisasi kepada pekerja tentang pentingnya ergonomi pada dunia kerja, dan sebaiknya pekerja melakukan istirahat atau peregangan otot minimal setiap tiga jam sekali.

  2. ANALISIS PENGUNGKAPAN SUSTAINABILITY REPORT PADA PERUSAHAAN NON-KEUANGAN TAHUN 2009-2013

    Directory of Open Access Journals (Sweden)

    Candri Puspita Marwati

    2015-10-01

    Full Text Available Penelitian ini bertujuan untuk menguji dan menganalisis pengaruh return on asset (ROA, likuiditas (current ratio, ukuran perusahaan (size, earning per share (EPS terhadap pengungkapan sustainability report. Sampel yang digunakan adalah perusahaan non-keuangan terdaftar di Bursa Efek Indonesia (BEI yang menerbitkan sustainability report sesuai standar GRI pada periode 2009-2013 dan diperoleh 12 perusahaan. Teknik analisis data menggunakan uji asumsi klasik: normalitas, multikolinearitas, autokorelasi dan heterokedastisitas. Uji hipotesis menggunakan analisis regresi berganda. Hasil penelitian ini menunjukkan bahwa ROA berpengaruh positif signifikan terhadap sustainability report, current ratio tidak mempengaruhi sustainability report, size memiliki pengaruh negatif dan signifikan terhadap sustainability report, dan EPS memiliki pengaruh negatif dan signifikan terhadap sustainability report.This study aims to examine and analyze the effect of return on assets (ROA, liquidity (current ratio, firm size (size, earnings per share (EPS on the disclosure of sustainability report. Sample are corporate non-financial listed on the Indonesia Stock Exchange (IDX and publishes a sustainability report according to GRI standard in the period 2009-2013 and obtained sample of 12 companies. Data were analyzed using classic assumption test: normality, multicollinearity, autocorrelation and heterokedastisitas. Hypothesis testing using multiple regression analysis. The results showed that, ROA significant positive effect on sustainability report. current ratio does not affect the sustainability report. size has a negative and significant impact on the sustainability report, and EPS has a negative and significant impact on the sustainability report.

  3. Estimating reaction rate constants: comparison between traditional curve fitting and curve resolution

    NARCIS (Netherlands)

    Bijlsma, S.; Boelens, H. F. M.; Hoefsloot, H. C. J.; Smilde, A. K.

    2000-01-01

    A traditional curve fitting (TCF) algorithm is compared with a classical curve resolution (CCR) approach for estimating reaction rate constants from spectral data obtained in time of a chemical reaction. In the TCF algorithm, reaction rate constants an estimated from the absorbance versus time data

  4. In-Vehicle Dynamic Curve-Speed Warnings at High-Risk Rural Curves

    Science.gov (United States)

    2018-03-01

    Lane-departure crashes at horizontal curves represent a significant portion of fatal crashes on rural Minnesota roads. Because of this, solutions are needed to aid drivers in identifying upcoming curves and inform them of a safe speed at which they s...

  5. Analisis pengaruh capital adequacy ratio (CAR) dan operational efficiency ratio (OER) terhadap return on assets (ROA) (Studi pada bank umum syariah devisa di Indonesia)

    OpenAIRE

    Maryadi, Eldi

    2017-01-01

    Tujuan dari penelitan ini adalah untuk menganalisis (1) perkembangan ROA, CAR dan OER pada bank umum syariah devisa di Indonesia. (2) CAR dan OER terhadap ROA pada bank umum syariah devisa di Indonesia periode 2009-2014. Data yang digunakan adalah data time series dari Laporan Keuangan tahunan Bank Umum Syariah Devisa di Indonesia periode 2009-2014, yaitu Bank BNI Syariah, Bank Mega Syariah, Bank Muamalat Indonesia, dan Bank Mandiri Syariah. Alat analisis yang digunakan adalah analisis deskri...

  6. ANALISIS KONDISI TERAS REAKTOR DAYA MAJU AP1000 PADA KECELAKAAN SMALL BREAK LOCA

    Directory of Open Access Journals (Sweden)

    Andi Sofrany Ekariansyah

    2015-06-01

    Full Text Available ABSTRAK ANALISIS KONDISI TERAS REAKTOR DAYA MAJU AP1000 PADA KECELAKAAN SMALL BREAK LOCA. Kecelakaan yang diakibatkan oleh kehilangan pendingin (loss of coolant accident / LOCA dari sistem reaktor merupakan kejadian dasar desain yang tetap diantisipasi dalam desain reaktor daya yang mengadopsi teknologi Generasi II hingga IV. LOCA ukuran kecil (small break LOCA memiliki dampak yang lebih signifikan terhadap keselamatan dibandingkan LOCA ukuran besar (large break LOCA seperti terlihat pada kejadian Three-Mile Island (TMI. Fokus makalah adalah pada analisis small break LOCA pada reaktor daya maju Generasi III+ yaitu AP1000 dengan mensimulasikan tiga kejadian pemicu yaitu membukanya katup Automatic Depressurization System (ADS secara tak disengaja, putusnya salah satu pipa Direct Vessel Injection (DVI secara double-ended, dan putusnya pipa lengan dingin dengan diameter bocoran 10 inci. Metode yang digunakan adalah simulasi kejadian pada model AP1000 yang dikembangkan secara mandiri menggunakan program perhitungan RELAP5/SCDAP/Mod3.4. Dampak yang ingin dilihat adalah kondisi teras selama terjadinya small break LOCA yang terdiri dari pembentukan mixture level dan transien temperatur kelongsong bahan bakar. Hasil simulasi menunjukkan bahwa mixture level untuk semua kejadian small break LOCA berada di atas tinggi teras aktif yang menunjukkan tidak terjadinya core uncovery. Adanya mixture level berpengaruh pada transien temperatur kelongsong yang menurun dan menunjukkan pendinginan bahan bakar yang efektif. Hasil di atas juga identik dengan hasil perhitungan program lain yaitu NOTRUMP. Keefektifan pendinginan teras juga disebabkan oleh berfungsinya injeksi pendingin melalui fitur keselamatan pasif yang menjadi ciri reaktor daya AP1000. Secara keseluruhan, hasil analisis menunjukkan model AP1000 yang telah dikembangkan dengan RELAP5 dapat digunakan untuk keperluan analisis kecelakaan dasar desain pada reaktor daya maju AP1000. Kata kunci: analisis

  7. Analisis Arus Kas Terkait Kebijakan Uang Kuliah Tunggal di Perguruan Tinggi Negeri Badan Hukum

    Directory of Open Access Journals (Sweden)

    Surtiati Surtiati

    2017-05-01

    Full Text Available The aims of the research were to analyze cash flow and compare tuition income in a State University with Legal Entity of “XYZ” for its first year TPB students (the First Common Year and of the first year until the fourth year before and after implementation of the single tuition fee system and formulate the management policies for the tuition income after the single tuition fee system. Analysis of cash flows consisted of cash ratio, quick ratio and current ratio. Paired t-test was used to analyze differences between single tuition fee income and non single tuition fee income. Based on the cash flow analysis, it is found that the University of “XYZ” has a liquid financial condition. The significant difference is, moreover, detected from the paired t-test analysis between single and non single tuition fee of total income from the first year student tuition. However, there is no difference detected when the analysis was conducted for total income from all four year tuitions. Management policies tuition income after the single tuition fee system payment delays should be minimized so that tuition fee funds can be completely collected. The allocation of fees to the faculty/department was originally based on the BPMP, and BPMK uses a tariff system so that cost per subject does not necessarily correspond with the needs. This is not in accordance with the single tuition fee system that is based on the unit cost. This means that the cost of the course is based on real needs, not based on the rates set.Keywords: cash flow analysis, state university with legal entity, single tuition feeABSTRAKPenelitian ini bertujuan menganalisis arus kas, mengkaji perbedaan penerimaan SPP S1 Reguler satu tahun pertama bagi mahasiswa TPB dan tahun pertama sampai tahun ke empat sebelum dan sesudah kebijakan UKT di PTN Badan Hukum “XYZ. Selanjutnmya, merumuskan kebijakan pengelolaan SPP S1 reguler sesudah UKT. Analisis arus kas terdiri dari rasio kas, rasio cepat

  8. ANALISIS KEBUTUHAN UNTUK PENGEMBANGAN MODUL INKUIRI BERBASIS PERTANYAAN (MIBP DI SMP

    Directory of Open Access Journals (Sweden)

    Desak Made Citrawathi

    2016-08-01

    Full Text Available melakukan analisis kebutuhan untuk pengembangan dan penyusunan modul inkuri berbasis pertanyaan (MIBP. MIBP disusun untuk memfasilitasi pembelajaran sains agar dapat meningkatkan penguasaan konsep biologi, keterampilan proses sains, dan kemampuan berpikir siswa SMP. Pengembangan MIBP menggunakan model ADDIE. Prosedur pengembangan terdiri dari 5 tahap, yaitu 1 Menganalisis, 2 Mendisain, 3 Mengembangkan dan produksi, 4 Mengimplementasikan, dan 5 Mengevaluasi. Penelitian dilakukan dalam waktu 3 tahun. Pada tahun pertama ini dilakukan analisis kebutuhan dan mendisain MIBP. Subjek penelitian adalah guru IPA SMP Negeri dan Swasta di Kecamatan Buleleng. Pengumpulan data dilakukan dengan wawancara, penyebaran angket, observasi, dan dokumentasi. Analisis data dilakukan secara deskriptif dan interpretatif. Dari hasil analisis diperoleh bahwa kurikulum yang digunakan di SMPN 1,SMPN 2, dan SMPN 4 adalah kurikulum 2013, sedangkan di SMP lainnya masih menggunakan kurikulum 2006. Kemampuan guru bertanya untuk meningkatkan keterampilan proses sains, penguasaan konsep, dan kemampuan berpikir belum optimal. Hal ini ditunjukkan dari jenis pertanyaan yang diajukan guru 85,8 persen bersifat konvergen, dan 14,2 persen bersifat divergen. Berdasarkan pertanyaan menurut Taksonomi Bloom, pertanyaan yang diajukan guru 74,4 persen pertanyaan ingatan, 22,6 persen pemahaman, 2,68 persen aplikasi, dan 0,32 persen analisis. Salah satu yang dapat dilakukan untuk meningkatkan kemampuan guru adalah memfasilitasi pembelajarannya dengan MIBP. Dari karakteristik perkembangan kognitifnya, siswa SMP dapat dibelajarkan dengan strategi inkuiri, dan guru setuju dengan pengembangan MIBP. Kata kunci: Kemampuan berpikir, keterampilan proses sains, Modul Inkuiri Berbasis Pertanyaan, penguasaan konsep Pertanyaan, penguasaan konsep Abstract The purpose of this study was to analyze the need for the development and preparation of question-based inquiry module (QBIM. QBIM was designed conceiv to

  9. ANALISIS SKENARIO KEGAGALAN SISTEM UNTUK MENENTUKAN PROBABILITAS KECELAKAAN PARAH AP1000

    Directory of Open Access Journals (Sweden)

    D.T. Sony Tjahyani

    2014-03-01

    Full Text Available Kejadian Fukushima telah menunjukkan bahwa kecelakaan parah dapat terjadi, maka dari itu sangatlah penting untuk menganalisis tingkat keselamatan pada reaktor daya. Berdasarkan rekomendasi expert mission IAEA setelah kejadian Fukushima, perlu dilakukan upaya untuk meminimalisasi terjadinya kecelakaan parah yaitu dengan melakukan proses pendinginan yang maksimal. Dalam konsep keselamatan fasilitas nuklir, khususnya reaktor daya telah diterapkan konsep keselamatan berlapis (Defence in Depth, DiD. Konsep keselamatan tersebut terdiri atas 5 level pertahanan yang bertujuan mencegah dan mengurangi lepasan produk fisi ke masyarakat dan lingkungan pada saat reaktor daya mengalami kecelakaan. Dalam reaktor telah didesain sistem atau tindakan yang mempunyai fungsi untuk mengatasi setiap level tersebut. Tujuan dari analisis ini adalah menentukan probabilitas kecelakaan parah dengan melakukan skenario kegagalan sistem dalam proses pendinginan di reaktor. Sebagai obyek analisis adalah reaktor daya AP1000, karena jenis reaktor ini sedang banyak dibangun saat ini. Skenario dilakukan dengan mengasumsikan beberapa kombinasi kegagalan sistem yang termasuk dalam DiD level 2 dan 3. Kegagalan sistem kemudian dianalisis dengan menggunakan analisis pohon kegagalan berdasarkan perangkat lunak SAPHIRE ver. 6.76. Dari analisis didapatkan probabilitas gagal dari kelompok sistem DiD level 2 dan 3 pada AP1000 masih di bawah batas kriteria dari IAEA yaitu lebih kecil dari 10-2, serta probabilitas kecelakaan parah didapatkan sebesar 6,17 x 10-10. Berdasarkan analisis ini disimpulkan bahwa AP1000 mempunyai tingkat keselamatan yang cukup tinggi, karena melalui skenario kegagalan sistem didapatkan probabilitas kecelakaan parah yang sangat kecil.   ABSTRACT Fukushima accident has shown that severe accident could be occurred, therefore it is important to analyze safety level of nuclear power plants. Based on the recommendations of IAEA expert mission after the Fukushima accident

  10. Matter fields in curved space-time

    International Nuclear Information System (INIS)

    Viet, Nguyen Ai; Wali, Kameshwar C.

    2000-01-01

    We study the geometry of a two-sheeted space-time within the framework of non-commutative geometry. As a prelude to the Standard Model in curved space-time, we present a model of a left- and a right- chiral field living on the two sheeted-space time and construct the action functionals that describe their interactions

  11. Some genus 3 curves with many points

    NARCIS (Netherlands)

    Auer, R; Top, J; Fieker, C; Kohel, DR

    2002-01-01

    We explain a naive approach towards the problem of finding genus 3 curves C over any given finite field F-q of odd characteristic, with a number of rational points close to the Hasse-Weil-Serre upper bound q+1+3[2rootq]. The method turns out to be successful at least in characteristic 3.

  12. PV experience curves for the Netherlands

    International Nuclear Information System (INIS)

    Gerwig, R.

    2005-01-01

    Experience curves are one of several tools used by policy makers to take a look at market development. Numerous curves have been constructed for PV but none specific to the Netherlands. The objective of this report is to take a look at the price development of grid-connected PV systems in the Netherlands using the experience curve theory. After a literature and internet search and attempts to acquire information from PV companies information on 51% of the totally installed capacity was found. Curves for the period 1991-2001 were constructed based on system price, BOS (balance-of-system) price and inverter price. The progress ratio of the locally learning BOS was similar to the globally learning module market. This indicates that the pace of development of the Dutch PV market is similar to the globally followed pace. Improvement of the detail of the data might help to get a better idea of which BOS components have declined most. The similar progress ratio also shows the importance of investing both in module and system research as is the case in the Netherlands

  13. Bootstrap confidence intervals for principal response curves

    NARCIS (Netherlands)

    Timmerman, Marieke E.; Ter Braak, Cajo J. F.

    2008-01-01

    The principal response curve (PRC) model is of use to analyse multivariate data resulting from experiments involving repeated sampling in time. The time-dependent treatment effects are represented by PRCs, which are functional in nature. The sample PRCs can be estimated using a raw approach, or the

  14. Bootstrap Confidence Intervals for Principal Response Curves

    NARCIS (Netherlands)

    Timmerman, M.E.; Braak, ter C.J.F.

    2008-01-01

    The principal response curve (PRC) model is of use to analyse multivariate data resulting from experiments involving repeated sampling in time. The time-dependent treatment effects are represented by PRCs, which are functional in nature. The sample PRCs can be estimated using a raw approach, or the

  15. Light extraction block with curved surface

    Science.gov (United States)

    Levermore, Peter; Krall, Emory; Silvernail, Jeffrey; Rajan, Kamala; Brown, Julia J.

    2016-03-22

    Light extraction blocks, and OLED lighting panels using light extraction blocks, are described, in which the light extraction blocks include various curved shapes that provide improved light extraction properties compared to parallel emissive surface, and a thinner form factor and better light extraction than a hemisphere. Lighting systems described herein may include a light source with an OLED panel. A light extraction block with a three-dimensional light emitting surface may be optically coupled to the light source. The three-dimensional light emitting surface of the block may includes a substantially curved surface, with further characteristics related to the curvature of the surface at given points. A first radius of curvature corresponding to a maximum principal curvature k.sub.1 at a point p on the substantially curved surface may be greater than a maximum height of the light extraction block. A maximum height of the light extraction block may be less than 50% of a maximum width of the light extraction block. Surfaces with cross sections made up of line segments and inflection points may also be fit to approximated curves for calculating the radius of curvature.

  16. Spherical images and inextensible curved folding

    Science.gov (United States)

    Seffen, Keith A.

    2018-02-01

    In their study, Duncan and Duncan [Proc. R. Soc. London A 383, 191 (1982), 10.1098/rspa.1982.0126] calculate the shape of an inextensible surface folded in two about a general curve. They find the analytical relationships between pairs of generators linked across the fold curve, the shape of the original path, and the fold angle variation along it. They present two special cases of generator layouts for which the fold angle is uniform or the folded curve remains planar, for simplifying practical folding in sheet-metal processes. We verify their special cases by a graphical treatment according to a method of Gauss. We replace the fold curve by a piecewise linear path, which connects vertices of intersecting pairs of hinge lines. Inspired by the d-cone analysis by Farmer and Calladine [Int. J. Mech. Sci. 47, 509 (2005), 10.1016/j.ijmecsci.2005.02.013], we construct the spherical images for developable folding of successive vertices: the operating conditions of the special cases in Duncan and Duncan are then revealed straightforwardly by the geometric relationships between the images. Our approach may be used to synthesize folding patterns for novel deployable and shape-changing surfaces without need of complex calculation.

  17. Principal normal indicatrices of closed space curves

    DEFF Research Database (Denmark)

    Røgen, Peter

    1999-01-01

    A theorem due to J. Weiner, which is also proven by B. Solomon, implies that a principal normal indicatrix of a closed space curve with nonvanishing curvature has integrated geodesic curvature zero and contains no subarc with integrated geodesic curvature pi. We prove that the inverse problem alw...

  18. Steady turbulent flow in curved rectangular channels

    NARCIS (Netherlands)

    De Vriend, H.J.

    1979-01-01

    After the study of fully developed and developing steady laminar flow in curved channels of shallow rectangular wet cross-section (see earlier reports in this series), steady turbulent flow in such channels is investigated as a next step towards a mathematical model of the flow in shallow river

  19. ATLAS detector records its first curved muon

    CERN Multimedia

    2007-01-01

    The barrel muon spectrometer of the ATLAS detector has acquired its first cosmic event in a magnetic field produced by the barrel toroid magnet. This was an important test of the chambers in their final configurations, and marked the first triggering and measurement of curved cosmic ray muons in ATLAS.

  20. Dual kinetic curves in reversible electrochemical systems.

    Directory of Open Access Journals (Sweden)

    Michael J Hankins

    Full Text Available We introduce dual kinetic chronoamperometry, in which reciprocal relations are established between the kinetic curves of electrochemical reactions that start from symmetrical initial conditions. We have performed numerical and experimental studies in which the kinetic curves of the electron-transfer processes are analyzed for a reversible first order reaction. Experimental tests were done with the ferrocyanide/ferricyanide system in which the concentrations of each component could be measured separately using the platinum disk/gold ring electrode. It is shown that the proper ratio of the transient kinetic curves obtained from cathodic and anodic mass transfer limited regions give thermodynamic time invariances related to the reaction quotient of the bulk concentrations. Therefore, thermodynamic time invariances can be observed at any time using the dual kinetic curves for reversible reactions. The technique provides a unique possibility to extract the non-steady state trajectory starting from one initial condition based only on the equilibrium constant and the trajectory which starts from the symmetrical initial condition. The results could impact battery technology by predicting the concentrations and currents of the underlying non-steady state processes in a wide domain from thermodynamic principles and limited kinetic information.

  1. Remote sensing used for power curves

    DEFF Research Database (Denmark)

    Wagner, Rozenn; Ejsing Jørgensen, Hans; Schmidt Paulsen, Uwe

    2008-01-01

    Power curve measurement for large wind turbines requires taking into account more parameters than only the wind speed at hub height. Based on results from aerodynamic simulations, an equivalent wind speed taking the wind shear into account was defined and found to reduce the power standard deviat...

  2. Asymptotic Translation Length in the Curve Complex

    OpenAIRE

    Valdivia, Aaron D.

    2013-01-01

    We show that when the genus and punctures of a surface are directly proportional by some rational number the minimal asymptotic translation length in the curve complex has behavior inverse to the square of the Euler characteristic. We also show that when the genus is fixed and the number of punctures varies the behavior is inverse to the Euler characteristic.

  3. Strong imploding shock, the representative curve

    International Nuclear Information System (INIS)

    Mishkin, E.A.; Alejaldre, C.

    1981-01-01

    The representative curve of the ideal gas behind the front of a spherically, or cylindrically, symmetric strong imploding shock is shown to pass through the point where the reduced pressure is maximum, P(xisub(m)) = Psub(m)sub(a)sub(x). (orig.)

  4. Focus on Physics: The Delightful Catenary Curve

    Science.gov (United States)

    Hewitt, Paul G.

    2017-01-01

    When teaching how "tension" and "compression" relate to geometrical structures such as bridges, arches, and domes, The author shows a picture of the Notre Dame Cathedral in Paris, completed in the 14th century, and presents a lesson on using the curve called a catenary to explain how he teaches about tension and compression…

  5. Nonlinear Growth Curves in Developmental Research

    Science.gov (United States)

    Grimm, Kevin J.; Ram, Nilam; Hamagami, Fumiaki

    2011-01-01

    Developmentalists are often interested in understanding change processes, and growth models are the most common analytic tool for examining such processes. Nonlinear growth curves are especially valuable to developmentalists because the defining characteristics of the growth process such as initial levels, rates of change during growth spurts, and…

  6. Residual Structures in Latent Growth Curve Modeling

    Science.gov (United States)

    Grimm, Kevin J.; Widaman, Keith F.

    2010-01-01

    Several alternatives are available for specifying the residual structure in latent growth curve modeling. Two specifications involve uncorrelated residuals and represent the most commonly used residual structures. The first, building on repeated measures analysis of variance and common specifications in multilevel models, forces residual variances…

  7. Updated Hubbert curves analyze world oil supply

    International Nuclear Information System (INIS)

    Ivanhoe, L.F.

    1996-01-01

    The question is not whether, but when, world crude oil production will start to decline, ushering in the permanent oil shock era. While global information for predicting this event is not so straightforward as the data M. King Hubbert used in creating his famous Hubbert Curve that predicted the US (Lower 48 states, or US/48) 1970 oil production peak, there are strong indications that most of the world's large exploration targets have now been found. Meanwhile, the earth's population is exploding along with the oil needs of Asia's developing nations. This article reviews Hubbert's original analyses on oil discovery and production curves for the US/48 and projects his proven methodology onto global oil discoveries and production as of 1992. The world's oil discovery curve peaked in 1962, and thence declined, as a Hubbert Curve predicts. However, global production was restricted after the 1973 Arab oil embargo. Otherwise, world production would have peaked in the mid-1990s. Two graphs show alternate versions of future global oil production

  8. Growth Curves for Girls with Turner Syndrome

    Directory of Open Access Journals (Sweden)

    Fabio Bertapelli

    2014-01-01

    Full Text Available The objective of this study was to review the growth curves for Turner syndrome, evaluate the methodological and statistical quality, and suggest potential growth curves for clinical practice guidelines. The search was carried out in the databases Medline and Embase. Of 1006 references identified, 15 were included. Studies constructed curves for weight, height, weight/height, body mass index, head circumference, height velocity, leg length, and sitting height. The sample ranged between 47 and 1,565 (total = 6,273 girls aged 0 to 24 y, born between 1950 and 2006. The number of measures ranged from 580 to 9,011 (total = 28,915. Most studies showed strengths such as sample size, exclusion of the use of growth hormone and androgen, and analysis of confounding variables. However, the growth curves were restricted to height, lack of information about selection bias, limited distributional properties, and smoothing aspects. In conclusion, we observe the need to construct an international growth reference for girls with Turner syndrome, in order to provide support for clinical practice guidelines.

  9. Sound concentration caused by curved surfaces

    NARCIS (Netherlands)

    Vercammen, M.L.S.

    2012-01-01

    In room acoustics the focusing effect of reflections from concave surfaces is a wellknown problem. Although curved surfaces are found throughout the history of architecture, the occurrence of concave surfaces has tended to increase in modern architecture, due to new techniques in design, materials

  10. Singular interactions supported by embedded curves

    International Nuclear Information System (INIS)

    Kaynak, Burak Tevfik; Turgut, O Teoman

    2012-01-01

    In this work, singular interactions supported by embedded curves on Riemannian manifolds are discussed from a more direct and physical perspective, via the heat kernel approach. We show that the renormalized problem is well defined, the ground state is finite and the corresponding wavefunction is positive. The renormalization group invariance of the model is also discussed. (paper)

  11. Theoretical Magnon Dispersion Curves for Gd

    DEFF Research Database (Denmark)

    Lindgård, Per-Anker; Harmon, B. N.; Freeman, A. J.

    1975-01-01

    The magnon dispersion curve of Gd metal has been determined from first principles by use of augmented-plane-wave energy bands and wave functions. The exchange matrix elements I(k⃗, k⃗′) between the 4f electrons and the conduction electrons from the first six energy bands were calculated under...

  12. A Probabilistic Framework for Curve Evolution

    DEFF Research Database (Denmark)

    Dahl, Vedrana Andersen

    2017-01-01

    approach include ability to handle textured images, simple generalization to multiple regions, and efficiency in computation. We test our probabilistic framework in combination with parametric (snakes) and geometric (level-sets) curves. The experimental results on composed and natural images demonstrate...

  13. Covariant quantizations in plane and curved spaces

    International Nuclear Information System (INIS)

    Assirati, J.L.M.; Gitman, D.M.

    2017-01-01

    We present covariant quantization rules for nonsingular finite-dimensional classical theories with flat and curved configuration spaces. In the beginning, we construct a family of covariant quantizations in flat spaces and Cartesian coordinates. This family is parametrized by a function ω(θ), θ element of (1,0), which describes an ambiguity of the quantization. We generalize this construction presenting covariant quantizations of theories with flat configuration spaces but already with arbitrary curvilinear coordinates. Then we construct a so-called minimal family of covariant quantizations for theories with curved configuration spaces. This family of quantizations is parametrized by the same function ω(θ). Finally, we describe a more wide family of covariant quantizations in curved spaces. This family is already parametrized by two functions, the previous one ω(θ) and by an additional function Θ(x,ξ). The above mentioned minimal family is a part at Θ = 1 of the wide family of quantizations. We study constructed quantizations in detail, proving their consistency and covariance. As a physical application, we consider a quantization of a non-relativistic particle moving in a curved space, discussing the problem of a quantum potential. Applying the covariant quantizations in flat spaces to an old problem of constructing quantum Hamiltonian in polar coordinates, we directly obtain a correct result. (orig.)

  14. Covariant quantizations in plane and curved spaces

    Energy Technology Data Exchange (ETDEWEB)

    Assirati, J.L.M. [University of Sao Paulo, Institute of Physics, Sao Paulo (Brazil); Gitman, D.M. [Tomsk State University, Department of Physics, Tomsk (Russian Federation); P.N. Lebedev Physical Institute, Moscow (Russian Federation); University of Sao Paulo, Institute of Physics, Sao Paulo (Brazil)

    2017-07-15

    We present covariant quantization rules for nonsingular finite-dimensional classical theories with flat and curved configuration spaces. In the beginning, we construct a family of covariant quantizations in flat spaces and Cartesian coordinates. This family is parametrized by a function ω(θ), θ element of (1,0), which describes an ambiguity of the quantization. We generalize this construction presenting covariant quantizations of theories with flat configuration spaces but already with arbitrary curvilinear coordinates. Then we construct a so-called minimal family of covariant quantizations for theories with curved configuration spaces. This family of quantizations is parametrized by the same function ω(θ). Finally, we describe a more wide family of covariant quantizations in curved spaces. This family is already parametrized by two functions, the previous one ω(θ) and by an additional function Θ(x,ξ). The above mentioned minimal family is a part at Θ = 1 of the wide family of quantizations. We study constructed quantizations in detail, proving their consistency and covariance. As a physical application, we consider a quantization of a non-relativistic particle moving in a curved space, discussing the problem of a quantum potential. Applying the covariant quantizations in flat spaces to an old problem of constructing quantum Hamiltonian in polar coordinates, we directly obtain a correct result. (orig.)

  15. Numerical analysis of thermoluminescence glow curves

    International Nuclear Information System (INIS)

    Gomez Ros, J. M.; Delgado, A.

    1989-01-01

    This report presents a method for the numerical analysis of complex thermoluminescence glow curves resolving the individual glow peak components. The method employs first order kinetics analytical expressions and is based In a Marquart-Levenberg minimization procedure. A simplified version of this method for thermoluminescence dosimetry (TLD) is also described and specifically developed to operate whit Lithium Fluoride TLD-100. (Author). 36 refs

  16. Irregularities in the dendrochronological calibration curve

    International Nuclear Information System (INIS)

    Ottaway, J.H.; Ottaway, B.

    1975-01-01

    A discussion is presented on the reality or otherwise of short-term deviations from a linear or smooth curve relating conventional C-14 dates to dendrochronological measurements. The possibility of the effect of short-term changes in the earth's atmosphere and in the oceans, and particularly in their temperature, is considered. (U.K.)

  17. A spectral mean for random closed curves

    NARCIS (Netherlands)

    van Lieshout, Maria Nicolette Margaretha

    2016-01-01

    We propose a spectral mean for closed sets described by sample points on their boundaries subject to mis-alignment and noise. We derive maximum likelihood estimators for the model and noise parameters in the Fourier domain. We estimate the unknown mean boundary curve by back-transformation and

  18. A spectral mean for random closed curves

    NARCIS (Netherlands)

    M.N.M. van Lieshout (Marie-Colette)

    2016-01-01

    textabstractWe propose a spectral mean for closed sets described by sample points on their boundaries subject to mis-alignment and noise. We derive maximum likelihood estimators for the model and noise parameters in the Fourier domain. We estimate the unknown mean boundary curve by

  19. Contribution to the boiling curve of sodium

    International Nuclear Information System (INIS)

    Schins, H.E.J.

    1975-01-01

    Sodium in a pool was preheated to saturation temperatures at system pressures of 200, 350 and 500 torr. A test section of normal stainless steel was then extra heated by means of the conical fitting condenser zone of a heat pipe. Measurements were made of heat transfer fluxes, q in W/cm 2 , as a function of wall excess temperature above saturation, THETA = Tsub(w) - Tsub(s) in 0 C, both, in natural convection and in boiling regimes. These measurements make it possible to select the Subbotin natural convection and nucleate boiling curves among other variants proposed in literature. Further it is empirically demonstrated on water that the minimum film boiling point corresponds to the homogeneous nucleation temperature calculated by the Doering formula. Assuming that the minimum film boiling point of sodium can be obtained in the same manner, it is then possible to give an appoximate boiling curve of sodium for the use in thermal interaction studies. At 1 atm the heat transfer fluxes q versus wall temperatures THETA are for a point on the natural convection curve 0.3 W/cm 2 and 2 0 C; for start of boiling 1.6 W/cm 2 and 6 0 C; for peak heat flux 360 W/cm 2 and 37 0 C; for minimum film boiling 30 W/cm 2 and 905 0 C and for a point on the film boiling curve 160 W/cm 2 and 2,000 0 C. (orig.) [de

  20. Designing the Alluvial Riverbeds in Curved Paths

    Science.gov (United States)

    Macura, Viliam; Škrinár, Andrej; Štefunková, Zuzana; Muchová, Zlatica; Majorošová, Martina

    2017-10-01

    The paper presents the method of determining the shape of the riverbed in curves of the watercourse, which is based on the method of Ikeda (1975) developed for a slightly curved path in sandy riverbed. Regulated rivers have essentially slightly and smoothly curved paths; therefore, this methodology provides the appropriate basis for river restoration. Based on the research in the experimental reach of the Holeška Brook and several alluvial mountain streams the methodology was adjusted. The method also takes into account other important characteristics of bottom material - the shape and orientation of the particles, settling velocity and drag coefficients. Thus, the method is mainly meant for the natural sand-gravel material, which is heterogeneous and the particle shape of the bottom material is very different from spherical. The calculation of the river channel in the curved path provides the basis for the design of optimal habitat, but also for the design of foundations of armouring of the bankside of the channel. The input data is adapted to the conditions of design practice.