WorldWideScience

Sample records for current study measured

  1. A study of eddy current measurement (1986-1987)

    Energy Technology Data Exchange (ETDEWEB)

    Ramachandran, R.S.; Armstrong, K.P.

    1989-06-22

    A study was conducted in 1986 to evaluate a modified eddy current system for measuring copper thickness on Kapton. Results showed a measurement error of 0.42 {mu}in. for a thickness range of 165 to 170 {mu}in. and a measurement variability of 3.2 {mu}in.

  2. Study of a fibre optics current sensor for the measurement of plasma current in ITER

    Science.gov (United States)

    Wuilpart, Marc; Vanus, Benoit; Andrasan, Alina; Gusarov, Andrei; Moreau, Philippe; Mégret, Patrice

    2016-05-01

    In this article, we study the feasibility of using a fibre-optics current sensor (FOCS) for the measurement of plasma current in the future fusion reactor ITER. The sensor is based on a classical FOCS interrogator involving the measurement of the state of polarization rotation undergone by the light in presence of a magnetic field (Faraday effect) in an optical fibre surrounding the current and terminated by a Faraday mirror. We considered a uniformly spun optical fibre as the sensing element and we used the Stokes formalism to simulate the sensor. The objective of the simulations is to quantify the ratio LB/SP (beat length over the spun period of the spun fibre) enabling a measurement error in agreement with the ITER specifications. The simulator takes into account the temperature variations undergone by the measurement system under ITER operation. The simulation work showed that a LB/SP ratio of 19.2 is adequate.

  3. Current measurement apparatus

    Science.gov (United States)

    Umans, Stephen D.

    2008-11-11

    Apparatus and methods are provided for a system for measurement of a current in a conductor such that the conductor current may be momentarily directed to a current measurement element in order to maintain proper current without significantly increasing an amount of power dissipation attributable to the current measurement element or adding resistance to assist in current measurement. The apparatus and methods described herein are useful in superconducting circuits where it is necessary to monitor current carried by the superconducting elements while minimizing the effects of power dissipation attributable to the current measurement element.

  4. SBC Dark Current Measurement

    Science.gov (United States)

    Ogaz, Sara

    2013-10-01

    This takes a series of SBC dark measurements over a continuous period of about 6 hours {4 orbits}. The aim is to collect dark images during an extended SBC on-time. Earlier measurements indicate that the dark current increases with SBC on-time and may also be increasing with overall SBC use. The 6-hour time matches the longest time used by any observer. As with all SBC observations this needs continuous SAA free time.This program is executed once per cycle. The last exposures were taken in Mar 2013 under Program 13161.

  5. HLS bunch current measurement system

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Bunch current is an important parameter for studying the injection fill-pattern in the storage ring and the instability threshold of the bunch, and the bunch current monitor also is an indispensable tool for the top-up injection. A bunch current measurement (BCM) system has been developed to meet the needs of the upgrade project of Hefei Light Source (HLS). This paper presents the layout of the BCM system. The system based on a high-speed digital oscilloscope can be used to measure the bunch current and synchronous phase shift. To obtain the absolute value of bunch-by-bunch current, the calibration coefficient is measured and analyzed. Error analysis shows that the RMS of bunch current is less than 0.01 mA when bunch current is about 5 mA, which can meet project requirement.

  6. Measuring child exposure to violence and mental health reactions in epidemiological studies: challenges and current issues.

    Science.gov (United States)

    Duarte, Cristiane Seixas; Bordin, Isabel Altenfelder Santos; Green, Genevieve Rachel; Hoven, Christina W

    2009-01-01

    This paper examines challenges and current issues involved in measuring exposure to different types of violence which are associated mental health problems in children and adolescents. Standardized measures suitable for epidemiological studies, selected based on their relevance in the current literature, are briefly described and commented. The assessment of child's exposure to violence may focus on a specific event (e.g., kidnapping), a specific context (e.g., war) or even of a certain type of exposure (e.g., intrafamilial physical violence). The assessment of child mental health after exposure to violence has traditionally focused on posttraumatic stress disorder (PTSD) - most frequently measured through non-diagnostic scales. However, other mental health reactions may be present and screening as well as diagnostic instruments which may be used to assess these reactions are also described. Two issues of emerging importance - the assessment of impairment and of traumatic grief in children - are also presented. Availability of culturally appropriate instruments is a crucial step towards proper identification of child mental health problems after exposure to violence.

  7. Partial discharge measurements on 110kV current transformers. Setting the control value. Case study

    Science.gov (United States)

    Dan, C.; Morar, R.

    2017-05-01

    The case study presents a series of partial discharge measurements, reflecting the state of insulation of 110kV CURRENT TRANSFORMERS located in Sibiu county substations. Measurements were performed based on electrical method, using MPD600: an acquisition and analysis toolkit for detecting, recording, and analyzing partial discharges. MPD600 consists of one acquisition unit, an optical interface and a computer with dedicated software. The system allows measurements of partial discharge on site, even in presence of strong electromagnetic interferences because it provides synchronous acquisition from all measurement points. Therefore, measurements, with the ability to be calibrated, do render: - a value subject to interpretation according to IEC 61869-1:2007 + IEC 61869-2:2012 + IEC 61869-3:2011 + IEC 61869-5:2011 and IEC 60270: 2000; - the possibility to determine the quantitative limit of PD (a certain control value) to which the equipment can be operated safely and repaired with minimal costs (relative to the high costs implied by eliminating the consequences of a failure) identified empirically (process in which the instrument transformer subjected to the tests was completely destroyed).

  8. Eddy currents in the anisotropy of out-of-phase magnetic susceptibility measurement - A model study

    Science.gov (United States)

    Jezek, Josef; Hrouda, Frantisek

    2016-04-01

    Analytical solutions of Maxwell equations for eddy currents caused by AC field in a conductive sphere, known from 1950s, provide a general formula for magnetic susceptibility. It contains the parameters describing the sphere (its size, conductivity and permeability), surrounding medium (permeability) and the applied field (frequency). The formula is complex and without numerical evaluation it is difficult to distinguish the real (in-phase) and imaginary (out-of-phase) part of susceptibility. Representing all the parameters by only two, relative permeability (sphere vs. medium) and skin ratio (summarizing the effect of sphere size, conductivity and permeability, and frequency of the field), we derive approximate formulas for both phases and the phase angle. These are valid for a reasonable range of parameters (from rock magnetism point of view) and enable us to study their influence. The in-phase susceptibility depends very weakly on the fourth power of the skin ratio while the out-of-phase susceptibility depends more strongly on its second power. The coefficients of the dependence are expressed by means of relative permeability. The approximations of in-phase and out-of-phase susceptibilities provide a possibility to assess possible effects of eddy currents in rocks in case of low content of conductive minerals and solve problems of the type by which size one piece of a mineral in the measured sample can produce a phase shift that is observed by measurement. Examples of magnetite and pyrrhotite are given.

  9. A study of pickup and signal processing for HLS-Ⅱ bunch current measurement system

    Institute of Scientific and Technical Information of China (English)

    YANG Yong-Liang; MA Tian-Ji; SUN Bao-Gen; WANG Ji-Gang; ZOU Jun-Ying; CHENG Chao-Cai; LU Ping

    2013-01-01

    For the HLS-Ⅱ bunch current measurement system,in order to obtain the absolute value of bunch current,the calibration factor should be determined by using DCCT.At the HLS storage ring,the stretch effect of bunch length is observed and the change rate is about 19% when the bunch current decays over time and this will affect the performance of bunch current detection.To overcome the bunch stretch influence in the HLS-Ⅱ bunch current measurement,an evaluation about pickup type and signal processing is carried out.Strip-line pickup and button pickup are selectable,and the theoretical analysis and demonstration experiment are performed to find out an acceptable solution for the bunch current measurement system at HLS-Ⅱ.The experimental data analysis shows that the normalized calibration factor will change by about 27% when the bunch length changes by about 19% if using the button pickup and processing by peak value of bunch signal; the influence will be reduced to 2% less if adopting the strip-line pickup and integral.

  10. Demagnetization treatment of remanent composite microspheres studied by alternating current susceptibility measurements

    NARCIS (Netherlands)

    van Berkum, S.; Erné, B.H.

    2013-01-01

    The magnetic remanence of silica microspheres with a low concentration of embedded cobalt ferrite nanoparticles is studied after demagnetization and remagnetization treatments. When the microspheres are dispersed in a liquid, alternating current (AC) magnetic susceptibility spectra reveal a constant

  11. Current/temperature measurements near the Sigsbee Escarpment from the MMS Desoto Canyon Intrusion Study, 19990829 - 20010906 (NODC Accession 0002569)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — During this study in-situ measurement of currents,temperature, conductivity were made on a series of tautline moorings near the base of and on the Sigsbee...

  12. MSE measurements for sawtooth and non-inductive current drive studies in KSTAR

    Science.gov (United States)

    Ko, J.; Park, H.; Bea, Y. S.; Chung, J.; Jeon, Y. M.

    2016-10-01

    Two major topics where the measurement of the magnetic-field-line rotational transform profiles in toroidal plasma systems include the long-standing issue of complete versus incomplete reconnection model of the sawtooth instability and the issue with future reactor-relevant tokamak devices in which non-inductive steady state current sustainment is essential. The motional Stark effect (MSE) diagnostic based on the photoelastic-modulator (PEM) approach is one of the most reliable means to measure the internal magnetic pitch, and thus the rotational transform, or its reciprocal (q), profiles. The MSE system has been commissioned for the Korea Superconducting Tokamak Advanced Research (KSTAR) along with the development of various techniques to minimize systematic offset errors such as Faraday rotation and mis-alignment of the bandpass filters. The diagnostic has revealed the central q is well correlated with the sawtooth oscillation, maintaining its value above unity during the MHD quiescent period and that the response of the q profile to external current drive such as electron cyclotron wave injection not only involves the local change of the pitch angle gradient but also a significant shift of the magnetic topology due to the wave energy transport. Work supported by the Ministry of Science, ICT and Future Planning, Korea.

  13. Electronic measurements of ionization currents

    Energy Technology Data Exchange (ETDEWEB)

    Hutyra, F.; Knapp, K.; Gregor, J. (Tesla, Premysleni (Czechoslovakia). Vyzkumny Ustav Pristroju Jaderne Techniky)

    1982-02-01

    Measurements are discussed of very low currents from ionization chambers. The currents range between 10/sup -15/ and 10/sup -9/ A. Two methods are discussed. A description is given of a dynamic and a semiconductor electrometers. Both meters are parts of dosimetric instruments for monitoring the dose rate (NB 9201) and the neutron-gamma mixed radiation dose rate (NDK 601).

  14. Demagnetization Treatment of Remanent Composite Microspheres Studied by Alternating Current Susceptibility Measurements

    Directory of Open Access Journals (Sweden)

    Ben H. Erné

    2013-09-01

    Full Text Available The magnetic remanence of silica microspheres with a low concentration of embedded cobalt ferrite nanoparticles is studied after demagnetization and remagnetization treatments. When the microspheres are dispersed in a liquid, alternating current (AC magnetic susceptibility spectra reveal a constant characteristic frequency, corresponding to the rotational diffusion of the microparticles; this depends only on particle size and liquid viscosity, making the particles suitable as a rheological probe and indicating that interactions between the microspheres are weak. On the macroscopic scale, a sample with the dry microparticles is magnetically remanent after treatment in a saturating field, and after a demagnetization treatment, the remanence goes down to zero. The AC susceptibility of a liquid dispersion, however, characterizes the remanence on the scale of the individual microparticles, which does not become zero after demagnetization. The reason is that an individual microparticle contains only a relatively small number of magnetic units, so that even if they can be reoriented magnetically at random, the average vector sum of the nanoparticle dipoles is not negligible on the scale of the microparticle. In contrast, on the macroscopic scale, the demagnetization procedure randomizes the orientations of a macroscopic number of magnetic units, resulting in a remanent magnetization that is negligible compared to the saturation magnetization of the entire sample.

  15. Demagnetization treatment of remanent composite microspheres studied by alternating current susceptibility measurements.

    Science.gov (United States)

    van Berkum, Susanne; Erné, Ben H

    2013-09-04

    The magnetic remanence of silica microspheres with a low concentration of embedded cobalt ferrite nanoparticles is studied after demagnetization and remagnetization treatments. When the microspheres are dispersed in a liquid, alternating current (AC) magnetic susceptibility spectra reveal a constant characteristic frequency, corresponding to the rotational diffusion of the microparticles; this depends only on particle size and liquid viscosity, making the particles suitable as a rheological probe and indicating that interactions between the microspheres are weak. On the macroscopic scale, a sample with the dry microparticles is magnetically remanent after treatment in a saturating field, and after a demagnetization treatment, the remanence goes down to zero. The AC susceptibility of a liquid dispersion, however, characterizes the remanence on the scale of the individual microparticles, which does not become zero after demagnetization. The reason is that an individual microparticle contains only a relatively small number of magnetic units, so that even if they can be reoriented magnetically at random, the average vector sum of the nanoparticle dipoles is not negligible on the scale of the microparticle. In contrast, on the macroscopic scale, the demagnetization procedure randomizes the orientations of a macroscopic number of magnetic units, resulting in a remanent magnetization that is negligible compared to the saturation magnetization of the entire sample.

  16. Study of flow channel geometry using current distribution measurement in a high temperature polymer electrolyte membrane fuel cell

    Science.gov (United States)

    Lobato, Justo; Cañizares, Pablo; Rodrigo, Manuel A.; Pinar, F. Javier; Úbeda, Diego

    To improve fuel cell design and performance, research studies supported by a wide variety of physical and electrochemical methods have to be carried out. Among the different techniques, current distribution measurement owns the desired feature that can be performed during operation, revealing information about internal phenomena when the fuel cell is working. Moreover, short durability is one of the main problems that is hindering fuel cell wide implementation and it is known to be related to current density heterogeneities over the electrode surface. A good flow channel geometry design can favor a uniform current density profile, hence hypothetically extending fuel cell life. With this, it was thought that a study on the influence of flow channel geometry on the performance of a high temperature polymer electrolyte membrane (PEM) fuel cell using current distribution measurement should be a very solid work to optimize flow field design. Results demonstrate that the 4 step serpentine and pin-type geometries distribute the reactants more effectively, obtaining a relatively flat current density map at higher current densities than parallel or interdigitated ones and yielding maximum powers up to 25% higher when using oxygen as comburent. If air is the oxidant chosen, interdigitated flow channels perform almost as well as serpentine or pin-type due to that the flow conditions are very important for this geometry.

  17. Study of fiber-optic current sensing based on degree of polarization measurement

    Institute of Scientific and Technical Information of China (English)

    Feng Liu; Qing Ye; Jianxin Geng; Ronghui Qu; Zujie Fang

    2007-01-01

    A novel fiber-optic current sensing scheme is proposed by converting the Faraday rotation to the optical signal's degree of polarization (DOP) change. In this scheme, the lightwave passes through a fiber resonant cavity multiply and experiences Faraday rotation simultaneously. Its main merit is immunity from the environment disturbance to the fiber used in ordinary Faraday rotation sensor. Brief theoretical analysis and simulation are given to show its basic characteristics. Experimental results are demonstrated and the feasibility of the proposed method is also shown.

  18. A Study on Measurement Error during Alternating Current Induced Voltage Tests on Large Transformers

    Institute of Scientific and Technical Information of China (English)

    WANG Xuan; LI Yun-ge; CAO Xiao-long; LIU Ying

    2006-01-01

    The large transformer is pivotal equipment in an electric power supply system; Its partial discharge test and the induced voltage withstand test on large transformers are carried out at a frequency about twice the working frequency. If the magnetizing inductance cannot compensate for the stray capacitance, the test sample turns into a capacitive load and a capacitive rise exhibits in the testing circuit. For self-restoring insulation, a method has been recommended in IEC60-1 that an unapproved measuring system be calibrated by an approved system at a voltage not less than 50% of the rated testing voltage, and the result then be extrapolated linearly. It has been found that this method leads to great error due to the capacitive rise if it is not correctly used during a withstand voltage test under certain testing conditions, especially for a test on high voltage transformers with large capacity. Since the withstand voltage test is the most important means to examine the operation reliability of a transformer, and it can be destructive to the insulation, a precise measurement must be guaranteed. In this paper a factor, named as the capacitive rise factor, is introduced to assess the rise. The voltage measurement error during the calibration is determined by the parameters of the test sample and the testing facilities, as well as the measuring point. Based on theoretical analysis in this paper, a novel method is suggested and demonstrated to estimate the error by using the capacitive rise factor and other known parameters of the testing circuit.

  19. Dark Current Measurements in GIF++

    CERN Document Server

    Al-Qahtani, Abdulaziz

    2017-01-01

    This project revolved around creating a code that treats experiment files in order to fetch dark current measurements done for the Cathode Strip Chambers (CSC) exposed to long-term irradiation at Gamma Irradiation Facility (GIF++) and plot the results as functions of the accumulated charge. This paper will discuss the Compact Muon Solenoid (CMS) experiment, the CSCs that we have looked at (specifically the muon detectors located at the CMS endcaps), longevity test at GIF++, and finally discuss the code and results obtained.

  20. Existential Measurement: A Factor Analytic Study of Some Current Psychometric Instruments.

    Science.gov (United States)

    Thauberger, Patrick C.; And Others

    1982-01-01

    Research in existentialism and ontology has given rise to several psychometric instruments. Used both exploratory and confirmatory principal-factor analyses to study relationships among 16 existential scales. Exploratory factor analysis provided some support of the theory that the avoidance of existential confrontation is a central function of…

  1. A comparative study of sheath potential profile measurements with laser-heated and current-heated emissive probes

    Science.gov (United States)

    Kella, Vara Prasad; Mehta, Payal; Sarma, A.; Ghosh, J.; Chattopadhyay, P. K.

    2016-04-01

    Emissive Langmuir probe is one of the most efficient diagnostic tools available for plasma potential measurements. Extensive studies have been carried out in designing different kinds of conventional (electrically heated) emissive probes (CEPs) to estimate the plasma potential. Laser heated emissive probe (LHEP) has been developed with certain advantages over the conventional probes such as low evaporation rate of the probe material, high lifetime, and high emission levels. Most importantly, the LHEP uses laser to heat the probe-tip and does not require electric current to heat the probe-tip like in CEP. The heating current in CEP substantially affects the plasma potential measurements, especially in the regions of plasma where high electric and magnetic field gradients are present. In this paper, we studied the plasma potential structures in sheath-presheath region using both LHEP and CEP in an unmagnetized dc-filament discharge plasma. Measurements of sheath spatial potential profile using laser heated emissive probe are compared with those obtained using conventional emissive probe.

  2. Eddy current thickness measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Rosen, Gary J.; Sinclair, Frank; Soskov, Alexander; Buff, James S.

    2015-06-16

    A sheet of a material is disposed in a melt of the material. The sheet is formed using a cooling plate in one instance. An exciting coil and sensing coil are positioned downstream of the cooling plate. The exciting coil and sensing coil use eddy currents to determine a thickness of the solid sheet on top of the melt.

  3. Current adaptation measures and policies

    Science.gov (United States)

    Geoff Roberts; John A. Parrotta; Anita. Wreford

    2009-01-01

    As stated in earlier chapters, the possible impacts of climate change on forests and the forest sector are considerable, and many impacts have already been observed. As forest conditions change, there is an inherent need to change management and policy measures to minimise negative impacts and to exploit the benefits derived from climate change. This chapter highlights...

  4. High Precision Current Measurement for Power Converters

    CERN Document Server

    Cerqueira Bastos, M

    2015-01-01

    The accurate measurement of power converter currents is essential to controlling and delivering stable and repeatable currents to magnets in particle accelerators. This paper reviews the most commonly used devices for the measurement of power converter currents and discusses test and calibration methods.

  5. Current Automotive Holometry Studies

    Science.gov (United States)

    Marchi, Mitchell M.; Snyder, D. S.

    1990-04-01

    Holometry studies of automotive body and powertrain components have become a very useful high resolution test methodology to knowledgeable Ford engineering personnel. Current examples of studies that represent the static or dynamic operational conditions of the automotive test component are presented. Continuous wave laser holometry, computer aided holometry (CAH) and pulsed laser holometry were the holometric techniques used to study the following subjects: (1) body in prime (BIP) vibration modes, (2) transmission flexplate stud-torque converter deformation due to engine torque pulses, (3) engine cylinder head and camshaft support structure deformation due to cylinder pressure and (4) engine connecting rod/cap lift-off. Static and dynamic component loading and laboratory techniques required to produce usable and valid test results are discussed along with possible conclusions for the engineering concerns.

  6. LEDA beam diagnostics instrumentation: Beam current measurement

    Science.gov (United States)

    Barr, D.; Day, L.; Gilpatrick, J. D.; Kasemir, K.-U.; Martinez, D.; Power, J. F.; Shurter, R.; Stettler, M.

    2000-11-01

    The Low Energy Demonstration Accelerator (LEDA) facility located at Los Alamos National Laboratory (LANL) accelerates protons to an energy of 6.7 MeV and current of 100 mA operating in either a pulsed or cw mode. Two types of current measurements are used. The first is an AC or pulsed-current measurement which uses three LANL built toroids. They are placed in the beamline in such a way as to measure important transmission parameters and act as a differential current-loss machine protection system. The second system is a DC current measurement used to measure cw beam characteristics and uses toroids from Bergoz Inc. There are two of these systems, so they can also be used for transmission measurements. The AC system uses custom processing electronics whereas the DC system uses a modified Bergoz® electronics system. Both systems feature data acquisition via a series of custom TMS320C40 Digital Signal Processing (DSP) boards. Of special interest to this paper is the operation of these systems, the calibration technique, the differential current loss measurements and fast-protection processing, current droop characteristics for the AC system, and existing system noise levels. This paper will also cover the DSP system operations and their interaction with the main accelerator control system.

  7. Reliability study on positive bias temperature instability in SiC MOSFETs by fast drain current measurement

    Science.gov (United States)

    Okunishi, Takuma; Hisada, Kenichi; Toyoda, Hisashi; Yamamoto, Yoichi; Arai, Koichi; Yamashita, Yasunori; Yamazaki, Koichi; Nara, Shunji

    2017-04-01

    The gate threshold voltage (V th) shift under positive gate bias stress is one of the most important reliability concerns in silicon carbide metal–oxide–semiconductor field effect transistors (SiC MOSFETs). Because dynamic recovery is observed as soon as the gate bias stress is removed, it is remarkably difficult to accurately evaluate V th shifts. Many studies have focused on how to evaluate V th shifts of SiC MOSFETs under positive gate bias stress. In this study, this issue is investigated by introducing a fast measurement technique. We show that the measured V th shift is modified to take the V th recovery term into consideration. Furthermore, we show that the V th shift is a saturation phenomenon and that the maximum V th shift can be predicted using an electron capture and emission model.

  8. Sensitive beam current measurement for FAIR

    Energy Technology Data Exchange (ETDEWEB)

    Schwickert, Marcus; Kurian, Febin; Reeg, Hansjoerg [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Seidel, Paul; Neubert, Ralf [Friedrich-Schiller-Universitaet Jena (Germany); Geithner, Rene; Vodel, Wolfgang [Helmholtz-Institut Jena (Germany)

    2012-07-01

    Presently FAIR, the Facility for Antiproton and Ion Research, entered the final planning phase at GSI. The new accelerator facility requires precise devices for beam current measurements due to the large dynamics in beam intensities for the various synchrotrons, transport lines and storage rings. We report on the actual developments of beam diagnostic devices for the measurement of beam intensities ranging from 5 x 10{sup 11} uranium ions down to the detection of less than 10{sup 4} antiprotons. This contribution gives an overview of the planned instruments with a focus on non-intercepting beam current transformers, and summarizes the on-going development of a cryogenic current comparator.

  9. Leakage current measurement in transformerless PV inverters

    DEFF Research Database (Denmark)

    Kerekes, Tamas; Sera, Dezso; Mathe, Laszlo

    2012-01-01

    to be used in commercial PV inverters for the measurement of leakage and fault ground currents. The German VDE0126–1–1 standard gives the limit for fault and leakage ground currents and all grid connected PV inverters have to comply with these limits and disconnect from the grid in case of a fault.......Photovoltaic (PV) installations have seen a huge increase during the last couple of years. Transformerless PV inverters are gaining more share of the total inverter market, due to their high conversion efficiency, small weight and size. Nevertheless safety should have an important role in case...... of these tranformerless systems, due to the missing galvanic isolation. Leakage and fault current measurement is a key issue for these inverter topologies to be able to comply with the required safety standards. This article presents the test results of two different current measurement sensors that were suggested...

  10. Noncontact Measurement Of Critical Current In Superconductor

    Science.gov (United States)

    Israelsson, Ulf E.; Strayer, Donald M.

    1992-01-01

    Critical current measured indirectly via flux-compression technique. Magnetic flux compressed into gap between superconductive hollow cylinder and superconductive rod when rod inserted in hole in cylinder. Hall-effect probe measures flux density before and after compression. Method does not involve any electrical contact with superconductor. Therefore, does not cause resistive heating and consequent premature loss of superconductivity.

  11. Study on the measure to improve the arc stabilization in smaller current welding for the variable polarity GTAW power source

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The variable polarity power source which incorporates a constant current power and a secondary inverter does not need special apparatus for stabilizing arc. The pulse for stabilizing arc is created by the circuit structure itself. The paper analyzes the principle of acquiring the pulse, provides the better method to improve the arc stabilization under smaller welding current. Test shows the arc is highly stable , and the process has no high-frequency electromagnetic interference, which is suitable for automatic welding case.

  12. Variable-Temperature Critical-Current Measurements

    Energy Technology Data Exchange (ETDEWEB)

    L. F. Goodrich; T. C. Stauffer

    2009-05-19

    This is the final report of a three year contract that covered 09/19/2005 to 07/14/2008. We requested and received a no cost time extension for the third year, 07/15/2007 to 07/14/2008, to allow DoE to send us funds if they became available during that year. It turned out that we did not receive any funding for the third year. The following paper covers our variable-temperature critical-current measurements. We made transport critical-current (Ic) measurements on commercial multifilamentary Nb3Sn strands at temperatures (T) from 4 to 17 K and magnetic fields (H) from 0 to 14 T. One of the unique features of our measurements is that we can cover a wide range of critical currents from less than 0.1 A to over 700 A.

  13. Current american practice in color measurement.

    Science.gov (United States)

    Billmeyer, F W

    1969-04-01

    Current Aimerienn practice in color measurement is reviewed from the standpoint of instrumentation practice, measurement concepts, and computational methods. Instrumentation practice is described for spectrophotometers, abridged spectrophotometers, and tristimulus colorimeters. Measurement variables discussed include photometric and wavelength scales, standards and standardization, illuminating and viewing geometry, and instrument sources simulating standard illuminants. Computation-methods practiced for obtaining color coordinates and color differences are discussed. Topics indirectly related to the measurement step, such as the basis of colorimetry, color mixing laws, and computer color matching, are specifically excluded from this paper.

  14. Automatic system for ionization chamber current measurements.

    Science.gov (United States)

    Brancaccio, Franco; Dias, Mauro S; Koskinas, Marina F

    2004-12-01

    The present work describes an automatic system developed for current integration measurements at the Laboratório de Metrologia Nuclear of Instituto de Pesquisas Energéticas e Nucleares. This system includes software (graphic user interface and control) and a module connected to a microcomputer, by means of a commercial data acquisition card. Measurements were performed in order to check the performance and for validating the proposed design.

  15. Concurrent Validity and Feasibility of Short Tests Currently Used to Measure Early Childhood Development in Large Scale Studies

    Science.gov (United States)

    Rubio-Codina, Marta; Araujo, M. Caridad; Attanasio, Orazio; Muñoz, Pablo; Grantham-McGregor, Sally

    2016-01-01

    In low- and middle-income countries (LIMCs), measuring early childhood development (ECD) with standard tests in large scale surveys and evaluations of interventions is difficult and expensive. Multi-dimensional screeners and single-domain tests (‘short tests’) are frequently used as alternatives. However, their validity in these circumstances is unknown. We examined the feasibility, reliability, and concurrent validity of three multi-dimensional screeners (Ages and Stages Questionnaires (ASQ-3), Denver Developmental Screening Test (Denver-II), Battelle Developmental Inventory screener (BDI-2)) and two single-domain tests (MacArthur-Bates Short-Forms (SFI and SFII), WHO Motor Milestones (WHO-Motor)) in 1,311 children 6–42 months in Bogota, Colombia. The scores were compared with those on the Bayley Scales of Infant and Toddler Development (Bayley-III), taken as the ‘gold standard’. The Bayley-III was given at a center by psychologists; whereas the short tests were administered in the home by interviewers, as in a survey setting. Findings indicated good internal validity of all short tests except the ASQ-3. The BDI-2 took long to administer and was expensive, while the single-domain tests were quickest and cheapest and the Denver-II and ASQ-3 were intermediate. Concurrent validity of the multi-dimensional tests’ cognitive, language, and fine motor scales with the corresponding Bayley-III scale was low below 19 months. However, it increased with age, becoming moderate-to-high over 30 months. In contrast, gross motor scales’ concurrence was high under 19 months and then decreased. Of the single-domain tests, the WHO-Motor had high validity with gross motor under 16 months, and the SFI and SFII expressive scales showed moderate correlations with language under 30 months. Overall, the Denver-II was the most feasible and valid multi-dimensional test and the ASQ-3 performed poorly under 31 months. By domain, gross motor development had the highest concurrence

  16. Concurrent Validity and Feasibility of Short Tests Currently Used to Measure Early Childhood Development in Large Scale Studies.

    Science.gov (United States)

    Rubio-Codina, Marta; Araujo, M Caridad; Attanasio, Orazio; Muñoz, Pablo; Grantham-McGregor, Sally

    2016-01-01

    In low- and middle-income countries (LIMCs), measuring early childhood development (ECD) with standard tests in large scale surveys and evaluations of interventions is difficult and expensive. Multi-dimensional screeners and single-domain tests ('short tests') are frequently used as alternatives. However, their validity in these circumstances is unknown. We examined the feasibility, reliability, and concurrent validity of three multi-dimensional screeners (Ages and Stages Questionnaires (ASQ-3), Denver Developmental Screening Test (Denver-II), Battelle Developmental Inventory screener (BDI-2)) and two single-domain tests (MacArthur-Bates Short-Forms (SFI and SFII), WHO Motor Milestones (WHO-Motor)) in 1,311 children 6-42 months in Bogota, Colombia. The scores were compared with those on the Bayley Scales of Infant and Toddler Development (Bayley-III), taken as the 'gold standard'. The Bayley-III was given at a center by psychologists; whereas the short tests were administered in the home by interviewers, as in a survey setting. Findings indicated good internal validity of all short tests except the ASQ-3. The BDI-2 took long to administer and was expensive, while the single-domain tests were quickest and cheapest and the Denver-II and ASQ-3 were intermediate. Concurrent validity of the multi-dimensional tests' cognitive, language, and fine motor scales with the corresponding Bayley-III scale was low below 19 months. However, it increased with age, becoming moderate-to-high over 30 months. In contrast, gross motor scales' concurrence was high under 19 months and then decreased. Of the single-domain tests, the WHO-Motor had high validity with gross motor under 16 months, and the SFI and SFII expressive scales showed moderate correlations with language under 30 months. Overall, the Denver-II was the most feasible and valid multi-dimensional test and the ASQ-3 performed poorly under 31 months. By domain, gross motor development had the highest concurrence below 19

  17. Logarithmic current-measuring transistor circuits

    DEFF Research Database (Denmark)

    Højberg, Kristian Søe

    1967-01-01

    Describes two transistorized circuits for the logarithmic measurement of small currents suitable for nuclear reactor instrumentation. The logarithmic element is applied in the feedback path of an amplifier, and only one dual transistor is used as logarithmic diode and temperature compensating...... transistor. A simple one-amplifier circuit is compared with a two-amplifier system. The circuits presented have been developed in connexion with an amplifier using a dual m.o.s. transistor input stage with diode-protected gates....

  18. SQUID based cryogenic current comparator for measurements of the dark current of superconducting cavities

    Energy Technology Data Exchange (ETDEWEB)

    Vodel, W.; Nietzsche, S.; Neubert, R.; Nawrodt, R. [Friedrich Schiller Univ. Jena (Germany); Peters, A. [GSI Darmstadt (Germany); Knaack, K.; Wendt, M.; Wittenburg, K. [DESY Hamburg (Germany)

    2005-07-01

    The linear accelerator technology, based on super-conducting L-band (1.3 GHz) is currently under study at DESY (Hamburg, Germany). The two 10 km long main Linacs will be equipped with a total of nearly 20.000 cavities. The dark current due to the emission of electrons in these high gradient field super-conducting cavities is an unwanted particle source. A newly high performance SQUID based measurement system for detecting dark currents is proposed. It makes use of the Cryogenic Current Comparator principle and senses dark currents in the pA range with a measurement bandwidth of up to 70 kHz. The use of a cryogenic current comparator as dark current sensor has some important advantages: -) the measurement of the absolute value of the dark current, -) the non-dependence on the electron trajectories, -) the accurate absolute calibration with an additional wire loop, and -) extremely high resolution.

  19. Microstructure cantilever beam for current measurement

    Directory of Open Access Journals (Sweden)

    M.T.E. Khan

    2010-01-01

    Full Text Available Most microelectromechanical systems (MEMS sensors are based on the microcantilever technology, which uses a broad range of design materials and structures. The benefit ofMEMStechnology is in developing devices with a lower cost, lower power consumption, higher performance and greater integration. A free-end cantilever beam with a magnetic material mass has been designed using MEMS software tools. The magnetic material was used to improve the sensitivity of the cantilever beam to an externally-applied magnetic field. The cantilever was designed to form a capacitance transducer, which consisted of variable capacitance where electrical and mechanical energies were exchanged. The aim of this paper was to analyse the system design of the microcantilever when subjected to a magnetic field produced by a current-carrying conductor. When the signal, a sinusoidal current with a constant frequency, was applied, the cantilever beam exhibited a vibration motion along the vertical axis when placed closer to the line current. This motion created corresponding capacitance changes and generated a voltage output proportional to the capacitive change in the signal-processing circuitry attached to the microcantilever. The equivalent massspring system theory was used to describe and analyse the effect of the natural frequency of the system vibrations and motion due to the applied magnetic field, in a single-degree of freedom. The main application of this microcantilever is in current measurements to develop a non-contact current sensor mote.

  20. Critical current density: Measurements vs. reality

    Science.gov (United States)

    Pan, A. V.; Golovchanskiy, I. A.; Fedoseev, S. A.

    2013-07-01

    Different experimental techniques are employed to evaluate the critical current density (Jc), namely transport current measurements and two different magnetisation measurements forming quasi-equilibrium and dynamic critical states. Our technique-dependent results for superconducting YBa2Cu3O7 (YBCO) film and MgB2 bulk samples show an extremely high sensitivity of Jc and associated interpretations, such as irreversibility fields and Kramer plots, which lose meaning without a universal approach. We propose such approach for YBCO films based on their unique pinning features. This approach allows us to accurately recalculate the magnetic-field-dependent Jc obtained by any technique into the Jc behaviour, which would have been measured by any other method without performing the corresponding experiments. We also discovered low-frequency-dependent phenomena, governing flux dynamics, but contradicting the considered ones in the literature. The understanding of these phenomena, relevant to applications with moving superconductors, can clarify their dramatic impact on the electric-field criterion through flux diffusivity and corresponding measurements.

  1. Critical Current Measurements in Commercial Tapes, Coils, and Magnets.

    Science.gov (United States)

    Gubser, D. U.; Soulen, R. J., Jr.; Fuller-Mora, W. W.; Francavilla, T. L.

    1996-03-01

    We have measured a number of tapes, coils, and magnets produced by commercial vendors and determined their properties as functions of magnetic field and temperature. The tapes were measured at the National High Magnetic Field Laboratory in magnetic fields to 20 tesla and at temperatures of 4.2 K, 27 K, 65 K, and 77 K. For the tapes we report critical currents and current-voltage characteristics. Six inch diameter coils were measured at NRL in zero magnetic field. Critical currents, current-voltage characteristics, and reliability studies are reported for the coils. Larger 10 inch diameter coils, which are to be used in a 200 hp superconducting motor, were also measured and results will be presented. The talk will also review the status of the most recent tests of the superconducting motor.

  2. Current interruption measurement and analysis for PEM fuel cell

    Energy Technology Data Exchange (ETDEWEB)

    Sun, J.C.; Yuan, X.; Wang, H. [National Research Council of Canada, Vancouver, BC (Canada). Inst. for Fuel Cell Innovation

    2007-07-01

    The ohmic resistance, charge transfer resistance and the capacity discharge limit of proton exchange membrane (PEM) fuel cells can be evaluated and characterized by a newly developed, low cost, current interruption measuring method. This paper presented the results of a study in which the current interruption measurement for a PEM fuel cell was set up and proven through measurements with a dummy cell. The current interruption characteristics of a 500 W PEM fuel cell stack with an active area of 280 cm{sup 2} was measured using the National Instrument PCI data acquisition unit combined with a TDI electronics load-bank and a FuelCon test station, at different load currents. The ohmic loss of the stack determined by current interruption measurements was in good agreement with that determined by AC impedance spectroscopy. The same setup was shown to be effective for single cell measurements of a small PEM fuel cell and for a PEM fuel cell stack with a load bank. It was concluded that the current interruption measurement is much faster than the AC impedance method, but has lower accuracy, particularly for a signal with high noise. 1 ref., 10 figs.

  3. Current trends to measure implant stability.

    Science.gov (United States)

    Swami, Vasanthi; Vijayaraghavan, Vasantha; Swami, Vinit

    2016-01-01

    Implant stability plays a critical role for successful osseointegration. Successful osseointegration is a prerequisite for functional dental implants. Continuous monitoring in an objective and qualitative manner is important to determine the status of implant stability. Implant stability is measured at two different stages: Primary and secondary. Primary stability comes from mechanical engagement with cortical bone. Secondary stability is developed from regeneration and remodeling of the bone and tissue around the implant after insertion and affected by the primary stability, bone formation and remodelling. The time of functional loading is dependent upon the implant stability. Historically the gold standard method to evaluate stability were microscopic or histologic analysis, radiographs, however due to invasiveness of these methods and related ethical issues various other methods have been proposed like cutting torque resistance, reverse torque analysis, model analysis etc. It is, therefore, of an utmost importance to be able to access implant stability at various time points and to project a long term prognosis for successful therapy. Therefore this review focuses on the currently available methods for evaluation of implant stability.

  4. Current studies on megapode phylogeny

    NARCIS (Netherlands)

    Brom, T.G.; Dekker, R.W.R.J.

    1992-01-01

    Hypotheses regarding the phylogenetic relationships between megapodes and other birds are reviewed, and it is concluded that the available evidence supports a sistergroup relationship between megapodes and all other galliforms. Current studies in this direction are discussed. The resolvement of intr

  5. Study of tau-neutrino production by measuring Ds -> tau events in 400 GeV proton interactions: Test of lepton universality in neutrino charged-current interactions

    CERN Document Server

    Aoki, S; Ariga, T; Kodama, K; Nakamura, M; Sato, O; CERN. Geneva. SPS and PS Experiments Committee; SPSC

    2016-01-01

    The muon-neutrino charged-current (CC) cross section has been measured by many experiments. However, there has been only one measurement of the tau-neutrino CC cross section by the DONuT experiment with a systematic uncertainty larger than 50%, mainly due to uncertainties in the Ds differential production cross section in high energy proton interaction. The evaluation of the tau-neutrino cross section would provide a test of lepton universality in neutrino CC interactions, which has never been well tested for tau-neutrinos. In this new program, we propose to study tau-neutrino production (Ds production fraction x decay branching ratio of Ds -> tau) and the energy distribution by analyzing Ds -> tau events in 400 GeV proton interactions. By employing the state-of-the-art emulsion particle detector technologies, we will analyze 10^8 proton interactions and detect the double kink topology of Ds -> tau -> X decays. Accomplishing this new measurement, we will re-evaluate the tau-neutrino cross section with the dat...

  6. Point discharge current measurements beneath dust devils

    Science.gov (United States)

    Lorenz, Ralph D.; Neakrase, Lynn D. V.; Anderson, John P.; Harrison, R. Giles; Nicoll, Keri A.

    2016-12-01

    We document for the first time observations of point discharge currents under dust devils using a novel compact sensor deployed in summer 2016 at the USDA-ARS Jornada Experimental Range in New Mexico, USA. A consistent signature is noted in about a dozen events seen over 40 days, with a positive current ramping up towards closest approach, switching to a decaying negative current as the devil recedes. The currents, induced on a small wire about 10 cm above the ground, correlate with dust devil intensity (pressure drop) and dust loading, and reached several hundred picoAmps.

  7. Current wheeze, asthma, respiratory infections, and rhinitis among adults in relation to inspection data and indoor measurements in single-family houses in Sweden-The BETSI study.

    Science.gov (United States)

    Wang, J; Engvall, K; Smedje, G; Nilsson, H; Norbäck, D

    2016-12-22

    In the Swedish Building Energy, Technical Status and Indoor environment study, a total of 1160 adults from 605 single-family houses answered a questionnaire on respiratory health. Building inspectors investigated the homes and measured temperature, air humidity, air exchange rate, and wood moisture content (in attic and crawl space). Moisture load was calculated as the difference between indoor and outdoor absolute humidity. Totally, 7.3% were smokers, 8.7% had doctor' diagnosed asthma, 11.2% current wheeze, and 9.5% current asthma symptoms. Totally, 50.3% had respiratory infections and 26.0% rhinitis. The mean air exchange rate was 0.36/h, and the mean moisture load 1.70 g/m(3) . Damp foundation (OR=1.79, 95% CI 1.16-2.78) was positively associated while floor constructions with crawl space (OR=0.49, 95% CI 0.29-0.84) was negatively associated with wheeze. Concrete slabs with overlying insulation (OR=2.21, 95% CI 1.24-3.92) and brick façade (OR=1.71, 95% CI 1.07-2.73) were associated with rhinitis. Moisture load was associated with respiratory infections (OR=1.21 per 1 g/m(3) , 95% CI 1.04-1.40) and rhinitis (OR=1.36 per 1 g/m(3) , 95% CI 1.02-1.83). Air exchange rate was associated with current asthma symptoms (OR=0.85 per 0.1/h, 95% CI 0.73-0.99). Living in homes with damp foundation, concrete slabs with overlying insulation, brick façade, low ventilation flow, and high moisture load are risk factors for asthma, rhinitis, and respiratory infections.

  8. Anodal Transcranial Direct Current Stimulation Shows Minimal, Measure-Specific Effects on Dynamic Postural Control in Young and Older Adults: A Double Blind, Sham-Controlled Study.

    Science.gov (United States)

    Craig, Chesney E; Doumas, Michail

    2017-01-01

    We investigated whether stimulating the cerebellum and primary motor cortex (M1) using transcranial direct current stimulation (tDCS) could affect postural control in young and older adults. tDCS was employed using a double-blind, sham-controlled design, in which young (aged 18-35) and older adults (aged 65+) were assessed over three sessions, one for each stimulatory condition-M1, cerebellar and sham. The effect of tDCS on postural control was assessed using a sway-referencing paradigm, which induced platform rotations in proportion to the participant's body sway, thus assessing sensory reweighting processes. Task difficulty was manipulated so that young adults experienced a support surface that was twice as compliant as that of older adults, in order to minimise baseline age differences in postural sway. Effects of tDCS on postural control were assessed during, immediately after and 30 minutes after tDCS. Additionally, the effect of tDCS on corticospinal excitability was measured by evaluating motor evoked potentials using transcranial magnetic stimulation immediately after and 30 minutes after tDCS. Minimal effects of tDCS on postural control were found in the eyes open condition only, and this was dependent on the measure assessed and age group. For young adults, stimulation had only offline effects, as cerebellar stimulation showed higher mean power frequency (MPF) of sway 30 minutes after stimulation. For older adults, both stimulation conditions delayed the increase in sway amplitude witnessed between blocks one and two until stimulation was no longer active. In conclusion, despite tDCS' growing popularity, we would caution researchers to consider carefully the type of measures assessed and the groups targeted in tDCS studies of postural control.

  9. Study of longshore current equations for currents in Visakhapatnam beach

    Digital Repository Service at National Institute of Oceanography (India)

    Chandramohan, P.; Rao, T.V.N.

    Longshore currents were measured along the Visakhapatnam Beach, Andhra Pradesh, India at weekly intervals from March 1978 to March 1979. Visual observations on breaker characteristics were also made during this period. Using modified Longuet...

  10. [Current studies in myotonic dystrophy].

    Science.gov (United States)

    Zhao, Yimeng; Ishiura, Shoichi

    2014-03-01

    Myotonic dystrophy (DM) is a genetic, progressive, multisystemic disease with muscular disorder as its primary symptom. There are two types of DM (DM1 and DM2) caused by mutations in different genes, and in Japan, DM occurs with an incidence of approximately 1 in 20,000. The pathogenic mechanism underlying the disease is RNA toxicity caused by transcripts of aberrantly elongated CTG or CCTG repeats located in the 3' untranslated region or in the intron. The current treatments for DM is limited to symptomatic care. In this review, we will discuss several new therapeutic strategies based on recent studies of RNA toxicity.

  11. Wave measurement in severe ocean currents

    Digital Repository Service at National Institute of Oceanography (India)

    Diwan, S.G.; Suryavanshi, A.K.; Nayak, B.U.

    from 2 to 5 knots are observed. As a consequence of prevailing high currents, significant drag forces have been experiencEd. by the buoys and their mooring system causing occasional submergence. Some of the mooring systems and the components adopted...

  12. Multiscale Study of Currents Affected by Topography

    Science.gov (United States)

    2015-09-30

    boundary layers to influence the ambient larger-scale flow. We have studied these issues through ocean model simulations, adjoint sensitivity...circulation be monitored from pressure gauges, temperature sensors, current meters, or other measurements near the feature? • The influence of the

  13. Studies of Current Dependent Effects at ANKA

    CERN Document Server

    Müller, A S; Huttel, E; Pérez, F; Pont, M; Zimmermann, Frank

    2004-01-01

    The ANKA electron storage ring is operated at energies between 0.5 and 2.5 GeV. A major requirement for a synchrotron light source, such as ANKA, is to achieve a high beam current. A multitude of mostly impedance related effects depend on either bunch or total beam current. This paper gives an overview over the various beam studies performed at ANKA in this context, specifically the observation of current dependent detuning, the determination of the bunch length change with current from a measurement of the ratio between coherent and incoherent synchrotron tune and an assessment of the effective longitudinal loss factor from the current dependent horizontal closed orbit distortion.

  14. Current measurement method for characterization of fast switching power semiconductors with Silicon Steel Current Transformer

    DEFF Research Database (Denmark)

    Li, Helong; Beczkowski, Szymon; Munk-Nielsen, Stig

    2015-01-01

    This paper proposes a novel current measurement method with Silicon Steel Current Transformer (SSCT) for the characterization of fast switching power semiconductors. First, the existing current sensors for characterization of fast switching power semiconductors are experimentally evaluated...

  15. Determining Confounding Sensitivities In Eddy Current Thin Film Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Gros, Ethan; Udpa, Lalita; Smith, James A.; Wachs, Katelyn

    2016-07-01

    Determining Confounding Sensitivities In Eddy Current Thin Film Measurements Ethan Gros, Lalita Udpa, Electrical Engineering, Michigan State University, East Lansing MI 48824 James A. Smith, Experiment Analysis, Idaho National Laboratory, Idaho Falls ID 83415 Eddy current (EC) techniques are widely used in industry to measure the thickness of non-conductive films on a metal substrate. This is done using a system whereby a coil carrying a high-frequency alternating current is used to create an alternating magnetic field at the surface of the instrument's probe. When the probe is brought near a conductive surface, the alternating magnetic field will induce ECs in the conductor. The substrate characteristics and the distance of the probe from the substrate (the coating thickness) affect the magnitude of the ECs. The induced currents load the probe coil affecting the terminal impedance of the coil. The measured probe impedance is related to the lift off between coil and conductor as well as conductivity of the test sample. For a known conductivity sample, the probe impedance can be converted into an equivalent film thickness value. The EC measurement can be confounded by a number of measurement parameters. It is the goal of this research to determine which physical properties of the measurement set-up and sample can adversely affect the thickness measurement. The eddy current testing is performed using a commercially available, hand held eddy current probe (ETA3.3H spring loaded eddy probe running at 8 MHz) that comes with a stand to hold the probe. The stand holds the probe and adjusts the probe on the z-axis to help position the probe in the correct area as well as make precise measurements. The signal from the probe is sent to a hand held readout, where the results are recorded directly in terms of liftoff or film thickness. Understanding the effect of certain factors on the measurements of film thickness, will help to evaluate how accurate the ETA3.3H spring

  16. Monitoring and remediation of on-farm and off-farm ground current measured as step potential on a Wisconsin dairy farm: A case study.

    Science.gov (United States)

    Stetzer, Dave; Leavitt, Adam M; Goeke, Charles L; Havas, Magda

    2016-01-01

    Ground current commonly referred to as "stray voltage" has been an issue on dairy farms since electricity was first brought to rural America. Equipment that generates high-frequency voltage transients on electrical wires combined with a multigrounded (electrical distribution) system and inadequate neutral returns all contribute to ground current. Despite decades of problems, we are no closer to resolving this issue, in part, due to three misconceptions that are addressed in this study. Misconception 1. The current standard of 1 V at cow contact is adequate to protect dairy cows; Misconception 2. Frequencies higher than 60 Hz do not need to be considered; and Misconception 3. All sources of ground current originate on the farm that has a ground current problem. This case study of a Wisconsin dairy farm documents, 1. how to establish permanent monitoring of ground current (step potential) on a dairy farm; 2. how to determine and remediate both on-farm and off-farm sources contributing to step potential; 3. which step-potential metrics relate to cow comfort and milk production; and 4. how these metrics relate to established standards. On-farm sources include lighting, variable speed frequency drives on motors, radio frequency identification system and off-farm sources are due to a poor primary neutral return on the utility side of the distribution system. A step-potential threshold of 1 V root mean square (RMS) at 60 Hz is inadequate to protect dairy cows as decreases of a few mV peak-peak at higher frequencies increases milk production, reduces milking time and improves cow comfort.

  17. Measurement of axial injection displacement with trim coil current unbalance

    Science.gov (United States)

    Covo, Michel Kireeff

    2014-08-01

    The Dee probe used for measuring internal radial beam intensity shows large losses inside the radius of 20 cm of the 88 in. cyclotron. The current of the top and bottom innermost trim coil 1 is unbalanced to study effects of the axial injection displacement. A beam profile monitor images the ion beam bunches, turn by turn. The experimental bunch center of mass position is compared with calculations of the magnetic mirror effect displacement and shows good agreement.

  18. Viral fitness: definitions, measurement, and current insights

    Science.gov (United States)

    Wargo, Andrew R.; Kurath, Gael

    2012-01-01

    Viral fitness is an active area of research, with recent work involving an expanded number of human, non-human vertebrate, invertebrate, plant, and bacterial viruses. Many publications deal with RNA viruses associated with major disease emergence events, such as HIV-1, influenza virus, and Dengue virus. Study topics include drug resistance, immune escape, viral emergence, host jumps, mutation effects, quasispecies diversity, and mathematical models of viral fitness. Important recent trends include increasing use of in vivo systems to assess vertebrate virus fitness, and a broadening of research beyond replicative fitness to also investigate transmission fitness and epidemiologic fitness. This is essential for a more integrated understanding of overall viral fitness, with implications for disease management in the future.

  19. Normalized velocity profiles of field-measured turbidity currents

    Science.gov (United States)

    Xu, Jingping

    2010-01-01

    Multiple turbidity currents were recorded in two submarine canyons with maximum speed as high as 280 cm/s. For each individual turbidity current measured at a fixed station, its depth-averaged velocity typically decreased over time while its thickness increased. Some turbidity currents gained in speed as they traveled downcanyon, suggesting a possible self-accelerating process. The measured velocity profiles, first in this high resolution, allowed normalizations with various schemes. Empirical functions, obtained from laboratory experiments whose spatial and time scales are two to three orders of magnitude smaller, were found to represent the field data fairly well. The best similarity collapse of the velocity profiles was achieved when the streamwise velocity and the elevation were normalized respectively by the depth-averaged velocity and the turbidity current thickness. This normalization scheme can be generalized to an empirical function Y = exp(–αXβ) for the jet region above the velocity maximum. Confirming theoretical arguments and laboratory results of other studies, the field turbidity currents are Froude-supercritical.

  20. Measuring the Magnetic Force on a Current-Carrying Conductor.

    Science.gov (United States)

    Herreman, W.; Huysentruyt, R.

    1995-01-01

    Describes a fast and simple method for measuring the magnetic force acting on a current-carrying conductor using a digital balance. Discusses the influence of current intensity and wire length on the magnetic force on the conductor. (JRH)

  1. Determining confounding sensitivities in eddy current thin film measurements

    Science.gov (United States)

    Gros, Ethan; Udpa, Lalita; Smith, James A.; Wachs, Katelyn

    2017-02-01

    Eddy current (EC) techniques are widely used in industry to measure the thickness of non-conductive films on a metal substrate. This is done by using a system whereby a coil carrying a high-frequency alternating current is used to create an alternating magnetic field at the surface of the instrument's probe. When the probe is brought near a conductive surface, the alternating magnetic field will induce ECs in the conductor. The substrate characteristics and the distance of the probe from the substrate (the coating thickness) affect the magnitude of the ECs. The induced currents load the probe coil affecting the terminal impedance of the coil. The measured probe impedance is related to the lift off between coil and conductor as well as conductivity of the test sample. For a known conductivity sample, the probe impedance can be converted into an equivalent film thickness value. The EC measurement can be confounded by a number of measurement parameters. It was the goal of this research to determine which physical properties of the measurement set-up and sample can adversely affect the thickness measurement. The eddy-current testing was performed using a commercially available, hand-held eddy-current probe (ETA3.3H spring-loaded eddy probe running at 8 MHz) that comes with a stand to hold the probe. The stand holds the probe and adjusts the probe on the z-axis to help position the probe in the correct area as well as make precise measurements. The signal from the probe was sent to a hand-held readout, where the results are recorded directly in terms of liftoff or film thickness. Understanding the effect of certain factors on the measurements of film thickness, will help to evaluate how accurate the ETA3.3H spring-loaded eddy probe was at measuring film thickness under varying experimental conditions. This research studied the effects of a number of factors such as i) conductivity, ii) edge effect, iii) surface finish of base material and iv) cable condition.

  2. [Current status of autism studies].

    Science.gov (United States)

    Kurita, H

    2001-01-01

    The current status of autism studies was reviewed based on English articles published during the 1990s. Although the concepts of autism and pervasive developmental disorders (PDD) are established, diagnostic criteria of PDDNOS or atypical autism, which is frequently difficult to differentiate from autism, need to be established. The prevalence of autism has been estimated as about 0.05% in the U.S and many European countries, while it was reported to be 0.1% or higher in Japan and some European countries, though the reasons for this difference are unclear. High-functioning (IQ > or = 70) autism may not be as rare a condition as previously thought and both its difference from and similarity to Asperger's syndrome, the highest functioning PDD subtype, need clarification. About 20 to 40% of children with autism lose meaningful words by the age of 2 years and display autistic symptoms thereafter. Such autism, called the setback type in Japan, has been demonstrated to have a poorer adolescent/adult outcome compared to autism without setback and its relationship with childhood disintegrative disorder, which displays a clearer regression after normal development for at least the first 2 years of life, needs to be addressed. The etiology of autism is now considered mostly genetic for reasons, such as the significantly higher concordance rate of autism in identical twin pairs (60-80%) than in fraternal twin pairs (0-10%) and an 3-5% incidence of autism among sibs of an autism proband, 30 to 100 times higher than that in the general population. The involvement of several genes is implicated to create susceptibility for autism, yet the responsible genes have not been identified. Although there is no medication to cure autism, some psychotropic drugs, such as antipsychotics and SSRIs, seem effective for behavior problems in autism patients. Psychosocial treatments are the main therapeutic approach to autism, though they are yet to be well systematized. It is important to

  3. High impulse voltage and current measurement techniques fundamentals, measuring instruments, measuring methods

    CERN Document Server

    Schon, Klaus

    2013-01-01

    Equipment to be installed in electric power-transmission and distribution systems must pass acceptance tests with standardized high-voltage or high-current test impulses which simulate the stress on the insulation caused by external lightning discharges and switching operations in the grid. High impulse voltages and currents are also used in many other fields of science and engineering for various applications. Therefore, precise impulse-measurement techniques are necessary, either to prevent an over- or understressing of the insulation or to guarantee the effectiveness and quality of the application. The book deals with: principal generator circuits for generating high-voltage and high-current impulses measuring systems and their calibration according to IEC 60060 and IEC 62475 methods of estimating uncertainties of measurement mathematical and experimental basis for characterizing the transfer behavior of spatially extended systems used for measuring fast transients. This book is intended for engineers and ...

  4. Application of acoustic-Doppler current profiler and expendable bathythermograph measurements to the study of the velocity structure and transport of the Gulf Stream

    Science.gov (United States)

    Joyce, T. M.; Dunworth, J. A.; Schubert, D. M.; Stalcup, M. C.; Barbour, R. L.

    1988-01-01

    The degree to which Acoustic-Doppler Current Profiler (ADCP) and expendable bathythermograph (XBT) data can provide quantitative measurements of the velocity structure and transport of the Gulf Stream is addressed. An algorithm is used to generate salinity from temperature and depth using an historical Temperature/Salinity relation for the NW Atlantic. Results have been simulated using CTD data and comparing real and pseudo salinity files. Errors are typically less than 2 dynamic cm for the upper 800 m out of a total signal of 80 cm (across the Gulf Stream). When combined with ADCP data for a near-surface reference velocity, transport errors in isopycnal layers are less than about 1 Sv (10 to the 6th power cu m/s), as is the difference in total transport for the upper 800 m between real and pseudo data. The method is capable of measuring the real variability of the Gulf Stream, and when combined with altimeter data, can provide estimates of the geoid slope with oceanic errors of a few parts in 10 to the 8th power over horizontal scales of 500 km.

  5. Critical current measurement for design of HTS DC power cables

    Science.gov (United States)

    Watanabe, Hirofumi

    2017-02-01

    Critical currents of HTS DC power cables were calculated. In the calculation a relationship between critical current density and magnetic flux density proposed by Gömöry et al. [1] was used and the parameters used in the relationship were obtained by the critical current measurements with respect to the external magnetic field for a sample of the HTS tape. Numerical models of cables were composed and their critical currents were calculated, which showed the strong dependence on the arrangement of the HTS tapes in the cable. Critical current measurements of model cables assembled based on the calculations showed that the measured critical currents also depended on the arrangement of the HTS tapes strongly. The calculated results were compared with the experimental results, which showed that the experimental results agreed well with the calculated results.

  6. The bias in current measures of gestational weight gain.

    Science.gov (United States)

    Hutcheon, Jennifer A; Bodnar, Lisa M; Joseph, K S; Abrams, Barbara; Simhan, Hyagriv N; Platt, Robert W

    2012-03-01

    Conventional measures of gestational weight gain (GWG), such as average rate of weight gain, are likely to be correlated with gestational duration. Such a correlation could introduce bias to epidemiological studies of GWG and adverse perinatal outcomes because many perinatal outcomes are also correlated with gestational duration. This study aimed to quantify the extent to which currently used GWG measures may bias the apparent relationship between maternal weight gain and risk of preterm birth. For each woman in a provincial perinatal database registry (British Columbia, Canada, 2000-2009), a total GWG was simulated such that it was uncorrelated with risk of preterm birth. The simulation was based on serial antenatal GWG measurements from a sample of term pregnancies. Simulated GWGs were classified using three approaches: total weight gain (kg), average rate of weight gain (kg/week) or adequacy of GWG in relation to Institute of Medicine recommendations. Their association with preterm birth ≤32 weeks was explored using logistic regression. All measures of GWG induced an apparent association between GWG and preterm birth ≤32 weeks even when, by design, none existed. Odds ratios in the lowest fifths of each GWG measure compared with the middle fifths ranged from 4.4 [95% confidence interval (CI) 3.6, 5.4] (total weight gain) to 1.6 [95% CI 1.3, 2.0] (Institute of Medicine adequacy ratio). Conventional measures of GWG introduce serious bias to the study of maternal weight gain and preterm birth. A new measure of GWG that is uncorrelated with gestational duration is needed. © 2012 Blackwell Publishing Ltd.

  7. Current status of outcome measure development in vasculitis.

    Science.gov (United States)

    Merkel, Peter A; Aydin, Sibel Z; Boers, Maarten; Cornell, Christina; Direskeneli, Haner; Gebhart, Don; Hatemi, Gulen; Luqmani, Raashid; Matteson, Eric L; Milman, Nataliya; Robson, Joanna; Seo, Philip; Tomasson, Gunnar

    2014-03-01

    The conduct of randomized controlled trials for vasculitis, especially for the antineutrophil cytoplasmic antibody-associated vasculitides [AAV, granulomatosis with polyangiitis (Wegener's) and microscopic polyangiitis], has been greatly advanced by the development, use, and acceptance of validated outcome measures. Trials have subsequently provided the opportunity to validate and refine reliable, valid outcome measures for these multisystemic and relapsing rare diseases. The Outcome Measures in Rheumatology (OMERACT) Vasculitis Working Group was formed in 2004 to foster development of validated and widely accepted outcomes in vasculitis using data-driven analyses, a dedication to building consensus, and adherence to, and guidance by, the principles of the OMERACT approach. This work led to the endorsement by OMERACT of the core set of domains and associated outcome measures for AAV. Next steps for the study of existing outcome tools in AAV include better definition of response criteria through development of more data-driven weighting of the elements of activity and damage assessment. The Working Group is now also embarking on a series of linked projects to develop validated patient-reported outcomes for use in clinical research in vasculitis. Additionally, the Working Group is studying how current methods of disease assessment and plans for new outcomes can be informed by the conceptual framework of the International Classification of Function of the World Health Organization. The success of the Group's work in AAV has also led to a formal process for developing outcomes for the large vessel vasculitides (Takayasu arteritis and giant cell arteritis) and Behçet disease.

  8. Measurement of Neutrino Induced, Charged Current, Charged Pion Production

    Energy Technology Data Exchange (ETDEWEB)

    Wilking, Michael Joseph [Univ. of Colorado, Boulder, CO (United States)

    2009-05-01

    Neutrinos are among the least understood particles in the standard model of particle physics. At neutrino energies in the 1 GeV range, neutrino properties are typically determined by observing the outgoing charged lepton produced in a charged current quasi-elastic interactions. The largest charged current background to these measurements comes from charged current pion production interactions, for which there is very little available data.

  9. MPPT Technique Based on Current and Temperature Measurements

    Directory of Open Access Journals (Sweden)

    Eduardo Moreira Vicente

    2015-01-01

    Full Text Available This paper presents a new maximum power point tracking (MPPT method based on the measurement of temperature and short-circuit current, in a simple and efficient approach. These measurements, which can precisely define the maximum power point (MPP, have not been used together in other existing techniques. The temperature is measured with a low cost sensor and the solar irradiance is estimated through the relationship of the measured short-circuit current and its reference. Fast tracking speed and stable steady-state operation are advantages of this technique, which presents higher performance when compared to other well-known techniques.

  10. Spin Seebeck measurements of current-induced switching in YIG

    Science.gov (United States)

    Bartell, Jason; Jermain, Colin; Aradhya, Sriharsha; Wang, Hailong; Buhrman, Robert; Yang, Fengyuan; Ralph, Daniel; Fuchs, Gregory

    Quantifying spin torques generated at the interface between a normal metal (NM) and a ferromagnetic insulator (FI) is an important step in understanding the spin hall effect without charge transport. Measuring magnetization in NM/FI devices is challenging, however, because both magnetoresistive and magneto-optical signals are tiny in thin-film bilayers. We show that a promising alternative measurement approach is the use of picosecond thermal gradients to study spin torques in Pt/Yttrium Iron Garnet (YIG) bilayers. Recently, we demonstrated the application of heat to stroboscopically transduce a local magnetic moment into an electrical signal via the time resolved anomalous Nernst effect (TRANE) in ferromagnetic metals. Using a similar geometry the spin Seebeck effect of YIG combined with the inverse spin Hall effect of Pt enables measurement of local magnetization. Here we describe our study using this technique to study current-induced switching in Pt/YIG with sub-10 nm thick YIG films We acknowledge support from AFOSR.

  11. HIGH DYNAMIC-RANGE HIGH SPEED LINAC CURRENT MEASUREMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Deibele, Craig Edmond [ORNL; Curry, Douglas E [ORNL; Dickson, Richard W [ORNL

    2012-01-01

    It is desired to measure the linac current of a charged particle beam with a consistent accuracy over a dynamic range of over 120 dB. Conventional current transformers suffer from droop, can be susceptible to electromagnetic interference (EMI), and can be bandwidth limited. A novel detector and electronics were designed to maximize dynamic range of about 120 dB and measure rise-times on the order of 10 nanoseconds.

  12. A study of model bivalve siphonal currents

    Science.gov (United States)

    Monismith, Stephen G.; Koseff, Jeffrey R.; Thompson, Janet K.; O'Riordan, Catherine A.; Nepf, Heidi M.

    1990-01-01

    We carried out experiments studying the hydrodynamics of bivalve siphonal currents in a laboratory flume. Rather than use living animals, we devised a simple, model siphon pair connected to a pump. Fluorescence-based flow visualization was used to characterize siphon-jet flows for several geometric configurations and flow speeds. These measurements show that the boundary-layer velocity profile, siphon height, siphon pair orientation, and size of siphon structure all affect the vertical distribution of the excurrent flow downstream of the siphon pair and the fraction of excurrent that is refiltered. The observed flows may effect both the clearance rate of an entire population of siphonate bivalves as well as the efficiency of feeding of any individual. Our results imply that field conditions are properly represented in laboratory flume studies of phytoplankton biomass losses to benthic bivalves when the shear velocity and bottom roughness are matched to values found in the field. Numerical models of feeding by a bivalve population should include an effective sink distribution which is created by the combined incurrent-excurrent flow field. Near-bed flows need to be accounted for to properly represent these benthic-pelagic exchanges. We also present velocity measurements made with a laser-Doppler anemometer (LDA) for a single configuration (siphons flush with bed, inlet downstream) that show that the siphonal currents have a significant local effect on the properties of a turbulent boundary layer.

  13. Study of high current commutation by explosive switch

    Science.gov (United States)

    Usuba, S.; Kakudate, Y.; Yoshida, M.; Fujiwara, S.; Miyamoto, M.; Morita, T.; Kubota, A.; den, M.

    1993-01-01

    The study presents the basic experimental data obtained with a large current opening switch for current commutation using explosives. It is shown that currents up to a maximum of 40 kA can be completely interrupted within 30 microsec. The mechanism of current interruption using a thin conductor plate and methods of measuring interrupting current with a pickup coil and taking photographs with a high-speed camera (one frame per microsec) are discussed.

  14. A Fiber-Optic Aircraft Lightning Current Measurement Sensor

    Science.gov (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.

    2013-01-01

    A fiber-optic current sensor based on the Faraday Effect is developed for aircraft installations. It can measure total lightning current amplitudes and waveforms, including continuing current. Additional benefits include being small, lightweight, non-conducting, safe from electromagnetic interference, and free of hysteresis and saturation. The Faraday Effect causes light polarization to rotate in presence of magnetic field in the direction of light propagation. Measuring the total induced light polarization change yields the total current enclosed. The system operates at 1310nm laser wavelength and can measure approximately 300 A - 300 kA, a 60 dB range. A reflective polarimetric scheme is used, where the light polarization change is measured after a round-trip propagation through the fiber. A two-detector setup measures the two orthogonal polarizations for noise subtraction and improved dynamic range. The current response curve is non-linear and requires a simple spline-fit correction. Effects of high current were achieved in laboratory using combinations of multiple fiber and wire loops. Good result comparisons against reference sensors were achieved up to 300 kA. Accurate measurements on a simulated aircraft fuselage and an internal structure illustrate capabilities that maybe difficult with traditional sensors. Also tested at a commercial lightning test facility from 20 kA to 200 kA, accuracy within 3-10% was achieved even with non-optimum setups.

  15. Transport currents measured in ring samples: test of superconducting weld

    Science.gov (United States)

    Zheng, H.; Claus, H.; Chen, L.; Paulikas, A. P.; Veal, B. W.; Olsson, B.; Koshelev, A.; Hull, J.; Crabtree, G. W.

    2001-02-01

    The critical current densities in bulk melt-textured YBa 2Cu 3O x and across superconducting “weld” joints are measured using scanning Hall probe measurements of the trapped magnetic field in ring samples. With this method, critical current densities are obtained without the use of electrical contacts. Large persistent currents are induced in ring samples at 77 K, after cooling in a 3 kG field. These currents can be determined from the magnetic field they produce. At 77 K a supercurrent exceeding 2000 A (about 10 4 A/cm 2) was induced in a 2 cm diameter ring; this current produces a magnetic field exceeding 1.5 kG in the bore of the ring. We demonstrate that when a ring is cut, and the cut is repaired by a superconducting weld, the weld joint can transmit the same high supercurrent as the bulk.

  16. Fiber-Optic Sensor for Aircraft Lightning Current Measurement

    Science.gov (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George G.; Mata, Carlos T.; Mata, Angel G.; Snyder, Gary P.

    2012-01-01

    An electric current sensor based on Faraday rotation effect in optical fiber was developed for measuring aircraft lightning current. Compared to traditional sensors, the design has many advantages including the ability to measure total current and to conform to structure geometries. The sensor is also small, light weight, non-conducting, safe from interference, and free of hysteresis and saturation. Potential applications include characterization of lightning current waveforms, parameters and paths, and providing environmental data for aircraft certifications. In an optical fiber as the sensing medium, light polarization rotates when exposed to a magnetic field in the direction of light propagation. By forming closed fiber loops around a conductor and applying Ampere s law, measuring the total light rotation yields the enclosed current. A reflective polarimetric scheme is used, where polarization change is measured after the polarized light travels round-trip through the sensing fiber. The sensor system was evaluated measuring rocket-triggered lightning over the 2011 summer. Early results compared very well against a reference current shunt resistor, demonstrating the sensor s accuracy and feasibility in a lightning environment. While later comparisons show gradually increasing amplitude deviations for an undetermined cause, the overall waveforms still compared very well.

  17. Online junction temperature measurement using peak gate current

    DEFF Research Database (Denmark)

    Baker, Nick; Munk-Nielsen, Stig; Iannuzzo, Francesco

    2015-01-01

    A new method for junction temperature measurement of MOS-gated power semiconductor switches is presented. The measurement method involves detecting the peak voltage over the external gate resistor of an IGBT or MOSFET during turn-on. This voltage is directly proportional to the peak gate current...

  18. Atmospheric point discharge current measurements using a\\ud temperature-compensated logarithmic current amplifier

    OpenAIRE

    Marlton, Graeme; Harrison, R. Giles; Nicoll, Keri A.

    2013-01-01

    Measurements of atmospheric corona currents have been made for over 100 years to indicate the atmospheric electric field. Corona currents vary substantially, in polarity and in magnitude. The instrument described here uses a sharp point sensor connected to a temperature compensated bi-polar\\ud logarithmic current amplifier. Calibrations over a range of currents from ±10 fA to ±3 μA and across ±20 ◦C show it has an excellent logarithmic response over six orders of magnitude from 1 pA to 1 μA i...

  19. Note: Atmospheric point discharge current measurements using a temperature-compensated logarithmic current amplifier

    Science.gov (United States)

    Marlton, G. J.; Harrison, R. G.; Nicoll, K. A.

    2013-06-01

    Measurements of atmospheric corona currents have been made for over 100 years to indicate the atmospheric electric field. Corona currents vary substantially, in polarity and in magnitude. The instrument described here uses a sharp point sensor connected to a temperature compensated bi-polar logarithmic current amplifier. Calibrations over a range of currents from ±10 fA to ±3 μA and across ±20 °C show it has an excellent logarithmic response over six orders of magnitude from 1 pA to 1 μA in both polarities for the range of atmospheric temperatures likely to be encountered in the southern UK. Comparison with atmospheric electric field measurements during disturbed weather confirms that bipolar electric fields induce corona currents of corresponding sign, with magnitudes ˜0.5 μA.

  20. Note: atmospheric point discharge current measurements using a temperature-compensated logarithmic current amplifier.

    Science.gov (United States)

    Marlton, G J; Harrison, R G; Nicoll, K A

    2013-06-01

    Measurements of atmospheric corona currents have been made for over 100 years to indicate the atmospheric electric field. Corona currents vary substantially, in polarity and in magnitude. The instrument described here uses a sharp point sensor connected to a temperature compensated bi-polar logarithmic current amplifier. Calibrations over a range of currents from ±10 fA to ±3 μA and across ±20 °C show it has an excellent logarithmic response over six orders of magnitude from 1 pA to 1 μA in both polarities for the range of atmospheric temperatures likely to be encountered in the southern UK. Comparison with atmospheric electric field measurements during disturbed weather confirms that bipolar electric fields induce corona currents of corresponding sign, with magnitudes ~0.5 μA.

  1. The evaluation of rock permeability with streaming current measurements

    Science.gov (United States)

    Wang, Jun; Hu, Hengshan; Guan, Wei

    2016-09-01

    Rock permeability is an important parameter for the formation evaluation. In this paper, a new method with streaming current is proposed to determine the sample permeability based on the electrokinetic effects, and is proved by the experimental measurements. Corresponding to this method, we have designed an experimental setup and a test system, then performed the streaming current (potential) and electro-osmosis pressure experiments with 23 sandstone samples at 0.05 mol l-1 NaCl solution. The streaming current (potential) coefficient and electro-osmosis pressure coefficient are obtained, respectively, with the experimental data at low frequencies with AC lock-in technique. The electrokinetic permeabilities are further calculated with these coefficients. The results are consistent well with the gas permeability measured with Darcy's law, which verifies the current method for estimating rock permeability. Our measurements are also analysed and compared with previous measurements. The results indicate that our method can reflect the essence of electrokinetic effects better and simplify the electrokinetic measurements as well. In addition, we discuss the influences of experimental artefacts (core holder and confining pressure installation) on the electrokinetic data. The results show that the trough phenomenon, appeared in frequency curves of streaming current (potential) coefficients, is induced by the resonance of the core-holder/vibrator system. This is important for the design of electrokinetic setup and the analysis of low-frequency response of the electrokinetic coupling coefficients.

  2. Lightning Current Measurement with Fiber-Optic Sensor

    Science.gov (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.; Mata, Carlos T.; Mata, Angel G.; Snyder, Gary P.

    2014-01-01

    A fiber-optic current sensor is successfully developed with many potential applications for electric current measurement. Originally developed for in-flight lightning measurement, the sensor utilizes Faraday Effect in an optical fiber. The Faraday Effect causes linear light polarization in a fiber to rotate when the fiber is exposed to a magnetic field. The polarization change is detected using a reflective polarimetric scheme. Forming fiber loops and applying Ampere's law, measuring the total light rotation results in the determination of the total current enclosed. The sensor is conformable to complex structure geometry. It is also non-conductive and immune to electromagnetic interference, saturation or hysteresis. Installation is non-intrusive, and the sensor can be safely routed through flammable areas. Two similar sensor systems are described in this paper. The first system operates at 1310nm laser wavelength and is capable of measuring approximately 300 A - 300 kA, a 60 dB range. Laboratory validation results of aircraft lighting direct and in-direct effect current amplitudes are reported for this sensor. The second system operates at 1550nm wavelength and can measure about 400 A - 400 kA. Triggered-lightning measurement data are presented for this system. Good results are achieved in all cases.

  3. Effective shielding to measure beam current from an ion source

    Energy Technology Data Exchange (ETDEWEB)

    Bayle, H., E-mail: bayle@bergoz.com [Bergoz Instrumentation, Saint-Genis-Pouilly (France); Delferrière, O.; Gobin, R.; Harrault, F.; Marroncle, J.; Senée, F.; Simon, C.; Tuske, O. [CEA, Saclay (France)

    2014-02-15

    To avoid saturation, beam current transformers must be shielded from solenoid, quad, and RFQ high stray fields. Good understanding of field distribution, shielding materials, and techniques is required. Space availability imposes compact shields along the beam pipe. This paper describes compact effective concatenated magnetic shields for IFMIF-EVEDA LIPAc LEBT and MEBT and for FAIR Proton Linac injector. They protect the ACCT Current Transformers beyond 37 mT radial external fields. Measurements made at Saclay on the SILHI source are presented.

  4. Simulation of vibration-induced effect on plasma current measurement using a fiber optic current sensor.

    Science.gov (United States)

    Descamps, Frédéric; Aerssens, Matthieu; Gusarov, Andrei; Mégret, Patrice; Massaut, Vincent; Wuilpart, Marc

    2014-06-16

    An accurate measurement of the plasma current is of paramount importance for controlling the plasma magnetic equilibrium in tokamaks. Fiber optic current sensor (FOCS) technology is expected to be implemented to perform this task in ITER. However, during ITER operation, the vessel and the sensing fiber will be subject to vibrations and thus to time-dependent parasitic birefringence, which may significantly compromise the FOCS performance. In this paper we investigate the effects of vibrations on the plasma current measurement accuracy under ITER-relevant conditions. The simulation results show that in the case of a FOCS reflection scheme including a spun fiber and a Faraday mirror, the error induced by the vibrations is acceptable regarding the ITER current diagnostics requirements.

  5. Measurement of Current Profile in a Tokamak Through AC Modulation

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The plasma current is modulated with an alternating current (ac) component in a frequency range of 90 Hz~900 Hz in the plateau discharge phase in the CT-6B tokamak. A plasma electric conductivity profile in a form of (1 - r2/a2)α with a parameter α, which is fitted with the experimental data, can be determined. The effects of magnetic shear in a tokamak field configuration on the current penetration are taken into account in the numerical simulation. The measurement method and obtained results are discussed.

  6. Current Density Measurements of an Annular-Geometry Ion Engine

    Science.gov (United States)

    Shastry, Rohit; Patterson, Michael J.; Herman, Daniel A.; Foster, John E.

    2012-01-01

    The concept of the annular-geometry ion engine, or AGI-Engine, has been shown to have many potential benefits when scaling electric propulsion technologies to higher power. However, the necessary asymmetric location of the discharge cathode away from thruster centerline could potentially lead to non-uniformities in the discharge not present in conventional geometry ion thrusters. In an effort to characterize the degree of this potential nonuniformity, a number of current density measurements were taken on a breadboard AGI-Engine. Fourteen button probes were used to measure the ion current density of the discharge along a perforated electrode that replaced the ion optics during conditions of simulated beam extraction. Three Faraday probes spaced apart in the vertical direction were also used in a separate test to interrogate the plume of the AGI-Engine during true beam extraction. It was determined that both the discharge and the plume of the AGI-Engine are highly uniform, with variations under most conditions limited to 10% of the average current density in the discharge and 5% of the average current density in the plume. Beam flatness parameter measured 30 mm from the ion optics ranged from 0.85 0.95, and overall uniformity was shown to generally increase with increasing discharge and beam currents. These measurements indicate that the plasma is highly uniform despite the asymmetric location of the discharge cathode.

  7. History and current safety measures at Laguna Palcacocha, Huaraz, Peru

    Science.gov (United States)

    Salazar Checa, César; Cochachin, Alejo; Frey, Holger; Huggel, Christian; Portocarrero, César

    2017-04-01

    Laguna Palcacocha is a large glacier lake in the Cordillera Blanca, Peru, located in the Quillcay catchment, above the city of Huaraz, the local capital. On 13 December 1941, the moraine dam lake collapsed, probably after having been impacted by a large ice avalanche, and triggered a major outburst flood. This GLOF destroyed about a third of the city of Huaraz, causing about 2,000 casualties and is therefore one of the deadliest glacier lake outbursts known in history. In 1974, the Glaciology Unit of Peru, responsible for the studying, monitoring and mitigation works related to glacier hazards installed a reinforcement of the natural moraine dam of the newly filled Laguna Palcacocha, with an artificial drainage channel at 7 m below the crest of the reinforced dam. At that time, the lake had an area of 66,800 m2 and a volume of 0.5 x 106 m3. During the past decades, in the course of continued glacier retreat, Laguna Palcacocha has undergone an extreme growth. In February 2016, the lake had an area of 514,000 m2 (7.7 times the area of 1974) and a volume of more than 17 x 106 m3 (more than 34 times the volume of 1974). At the same time, the city of Huaraz, located 20 km downstream of the lake, grew significantly after its almost complete destruction by the 1970 earthquake. Today, about 120,000 people are living in the city. Due to the persisting possibility for large ice avalanches directly above the Palcacocha lake, this constitutes a high-risk situation, requiring new hazard and risk mitigation measures. As an immediate temporal measure, in order to bridge the time until the realization of a more permanent measure, a syphoning system has been installed in 2011, using about ten 700-m pipes with a 10-inch (25.4 cm) diameter. The aim of this syphoning attempt is to lower the lake level by about 7 m, and therefore reduce the lake volume on the one hand, and also reach a higher dam freeboard. However, the system is less effective than assumed, currently the lake level

  8. Concurrent Validity and Feasibility of Short Tests Currently Used to Measure Early Childhood Development in Large Scale Studies: Methodology and Results

    OpenAIRE

    Rubio-Codina, Marta; Araujo, María Caridad; Attanasio, Orazio P.; Grantham-McGregor, Sally

    2016-01-01

    In low- and middle-income countries (LIMCs) measuring early childhood development (ECD) with standard tests in large scale surveys (i.e. evaluations of interventions) is difficult and expensive. Multi-dimensional screeners and single-domain tests ('short tests') are frequently used as alternatives. However, their validity in these circumstances is unknown. We examine the feasibility, reliability, and concurrent validity of three multi-dimensional screeners -the Ages and Stages Questionnaires ...

  9. Intercomparison tests of moored current measurements in the upper ocean

    Science.gov (United States)

    Halpern, David; Weller, Robert A.; Briscoe, Melbourne G.; Davis, Russ E.; McCullough, James R.

    1981-01-01

    During the August-September 1977 Mixed Layer Experiment (Mile) and the July-September 1978 Joint Air-Sea Interaction (Jasin) project, moored current measurements were made in the upper ocean with Savonius rotor and vane vector-averaging current meters (VACM), dual orthogonal propeller vector-measuring current meters (VMCM), and dual orthogonal acoustic travel-time vector-averaging current meters (ACM). Wind speeds and significant wave heights reached 20ms-1 and 5 m. The influence of mooring motion upon ACM, VACM, and VMCM measurements are described. In the mixed layer above about 30 m depth where mean currents are relatively large, the effect of a surface-following buoy upon ACM, VACM, and VMCM velocity fluctuations at frequencies less than 0.3 cph was negligible; at frequencies above 4 cph, the VACM data contained the largest amount of mooring induced contamination. Below the mixed layer at depths greater than about 75 m, a subsurface mooring should be used; however, when a surface-following buoy was used, then VMCM data better approximated the spectrum of the fluctuations than VACM data. A spar-buoy should not be used to measure currents at depths as deep as 80 m. The frequency-dependent differences between VACM and VMCM and between VACM and ACM measurements are described. At frequencies less than 0.3 cph, the differences between the VACM and ACM or the VMCM records were not significant with 95% confidence limits, were always positive, and above 80 m depth were less than 20%. At frequencies above 4 cph, the VACM-VMCM differences were about 5 times larger than the VACM-ACM differences.

  10. Simulation of Current Measurement Using Magnetic Sensor Arrays and Its Error Model

    Institute of Scientific and Technical Information of China (English)

    WANGJing; YAOJian-jun; WANGJian-hua

    2004-01-01

    Magnetic sensor arrays are proposed to measure electric current in a non-contac tway. In order to achieve higher accuracy, signal processing techniques for magnetic sensor arrays are utilized. Simulation techniques are necessary to study the factors influencing the accuracy of current measurement. This paper presents a simulation method to estimate the impact of sensing area and position of sensors on the accuracy of current measurement. Several error models are built up to support computer-aided design of magnetic sensor arrays.

  11. A Fiber-Optic Current Sensor for Lightning Measurement Applications

    Science.gov (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.

    2015-01-01

    An optical-fiber sensor based on Faraday Effect is developed for measuring total lightning electric current. It has many unique capabilities not possible with traditional current sensors. Designed for aircraft installation, the sensor is lightweight, non-conducting, structure-conforming, and is immune to electromagnetic interference, hysteresis and saturation. It can also be used on windmills, lightning towers, and can help validate lightning detection network measurements. Faraday Effect causes light polarization to rotate when the fiber is exposed to a magnetic field in the direction of light propagation. Thus, the magnetic field strength can be determined from the light polarization change. By forming closed fiber loops and applying Ampere's law, measuring the total light rotation yields the total current enclosed. The broadband, dual-detector, reflective polarimetric scheme allows measurement of both DC component and AC waveforms with about 60 dB dynamic range. Three sensor systems were built with different sensitivities from different laser wavelengths. Operating at 850nm, the first system uses twisted single-mode fiber and has a 150 A - 150 KA range. The second system operates at 1550nm, uses spun polarization maintaining fiber, and can measure 400 A - 400 KA. Both systems were validated with rocket-triggered lightning measurements and achieved excellent results when compared to a resistive shunt. The third system operates at 1310nm, uses spun polarization maintaining fiber, and can measure approximately 300 A - 300 KA. High current measurements up to 200 KA were demonstrated at a commercial lightning test facility. The system was recently installed on an aircraft and flown near icing weather conditions.

  12. Interlaboratory Comparisons of NbTi Critical Current Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Godeke, A.; Turrioni, D.; Boutboul, T.; Cheggour, N.; Goodrich, L.F.; Ghosh, A.; Den Ouden, A.; Meinesz, M.

    2009-08-16

    We report on a multi-institute comparison of critical current data measured on a modern NbTi wire for the Large Hadron Collider (LHC), which has shown a standard deviation below 1% in critical current density spread in more than 1500 measurements. Interlaboratory comparisons on Nb{sub 3}Sn wires have shown ambiguities that could be attributable to strain related differences in critical current density, originating from differences in sample handling, reaction, and mounting techniques, or also to differences in the magnetic field and current calibrations between the institutes. A round robin test of a well characterized NbTi wire provides a baseline variance in critical current results that is presumed to be attributable only to differences in the characterization systems. Systematic differences on the order of 3.5% are found in the comparison. The most likely cause for the observed differences is a small diameter holder that brings the wire into a strain regime in which strain effects can no longer be ignored. A NbTi round robin test, when performed properly, will separate system differences from sample specific differences and provide laboratories with an opportunity to calibrate equipment against a standard measurement.

  13. Surface Current Measurements In Terra Nova Bay By Hf Radar

    Science.gov (United States)

    Flocco, D.; Falco, P.; Wadhams, P.; Spezie, G.

    We present the preliminary results of a field experiment carried out within frame- work of the CLIMA project of the Italian National Programme for Antarctic Research (PNRA) and in cooperation with the Scott Polar Research Institute of Cambridge. Dur- ing the second period (02/12/1999-23/01/2000) of the XV Italian expedition a coastal radar was used to characterize the current field in the area of Terra Nova Bay (TNB). One of the aims of the CLIMA (Climatic Long-term Interactions for the Mass balance in Antarctica) project is to determine the role of the polynya in the sea ice mass bal- ance, water structure and local climate. The OSCR-II experiment was planned in order to provide surface current measurements in the area of TNB polynya, one of the most important coastal polynya of the Ross Sea. OSCR (Ocean Surface Current Radar) is a shore based, remote sensing system designed to measure sea surface currents in coastal waters. Two radar sites (a master and a slave) provide with radial current mea- surements; data combined from both sites yield the total current vector. Unfortunately the master and slave stations did not work together throughout the whole period of the experiment. A description of the experiment and a discussion of the results, will be proposed.

  14. Tethered acoustic doppler current profiler platforms for measuring streamflow

    Science.gov (United States)

    Rehmel, Michael S.; Stewart, James A.; Morlock, Scott E.

    2003-01-01

    The U.S. Geological Survey tested and refined tethered-platform designs for measuring streamflow. Platform specifications were developed, radio-modem telemetry of acoustic Doppler current profiler (ADCP) data and potential platform-hull sources were investigated, and hulls were tested and evaluated.

  15. Fiber-Optic Current Sensor Validation with Triggered Lightning Measurements

    Science.gov (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.; Mata, Carlos T.; Mata, Angel G.; Snyder, Gary P.

    2013-01-01

    A fiber optic current sensor based on the Faraday Effect is developed that is highly suitable for aircraft installation and can measure total current enclosed in a fiber loop down to DC. Other attributes include being small, light-weight, non-conducting, safe from electromagnetic interference, and free of hysteresis and saturation. The Faraday Effect causes light polarization to rotate when exposed to a magnetic field in the direction of light propagation. Measuring the induced light polarization rotation in fiber loops yields the total current enclosed. Two sensor systems were constructed and installed at Camp Blanding, Florida, measuring rocket-triggered lightning. The systems were similar in design but with different laser wavelengths, sensitivities and ranges. Results are compared to a shunt resistor as reference. The 850nm wavelength system tested in summer 2011 showed good result comparison early. However, later results showed gradual amplitude increase with time, attributed to corroded connections affecting the 50-ohm output termination. The 1550nm system also yielded good results in the summer 2012. The successful measurements demonstrate the fiber optic sensor's accuracies in capturing real lightning currents, and represent an important step toward future aircraft installation.

  16. Beam Current Measurement and Adjustment System on AMS

    Institute of Scientific and Technical Information of China (English)

    WUShao-yong; HEMING; SUSheng-yong; WANGZhen-jun; JIANGShan

    2003-01-01

    The beam current measurement and adjustment system of HI-13 tandem accelerator mass spectrometry detector system is consisted of the faraday cup, fluorescent target and a series of adjustable vertical slits(Fig. 1). The system's operation is very complicated and the transmission is low for the old system. A new system is instalated for improvement. We put the adjustable vertical slit, Faraday cup.

  17. Current trends in outcome studies for children with hearing loss and the need to establish a comprehensive framework of measuring outcomes in children with hearing loss in China

    Institute of Scientific and Technical Information of China (English)

    Xueman Liu

    2016-01-01

    Since the 1970s, outcome studies for children with hearing loss expanded from focusing on assessing auditory awareness and speech perception skills to evaluating language and speech development. Since the early 2000s, the multi-center large scale research systematically studied outcomes in the areas of auditory awareness, speech-perception, language development, speech development, educational achievements, cognitive development, and psychosocial development. These studies advocated the establishment of baseline and regular follow-up evaluations with a comprehensive framework centered on language development. Recent research interests also include understanding the vast differences in outcomes for children with hearing loss, understanding the relationships between neurocognitive development and language acquisition in children with hearing loss, and using outcome studies to guide evidence-based clinical practice. After the establishment of standardized Mandarin language assessments, outcomes research in Mainland China has the potential to expand beyond auditory awareness and speech perception studies.

  18. Current trends in outcome studies for children with hearing loss and the need to establish a comprehensive framework of measuring outcomes in children with hearing loss in China

    Directory of Open Access Journals (Sweden)

    Xueman Liu

    2016-06-01

    Full Text Available Since the 1970s, outcome studies for children with hearing loss expanded from focusing on assessing auditory awareness and speech perception skills to evaluating language and speech development. Since the early 2000s, the multi-center large scale research systematically studied outcomes in the areas of auditory awareness, speech-perception, language development, speech development, educational achievements, cognitive development, and psychosocial development. These studies advocated the establishment of baseline and regular follow-up evaluations with a comprehensive framework centered on language development. Recent research interests also include understanding the vast differences in outcomes for children with hearing loss, understanding the relationships between neurocognitive development and language acquisition in children with hearing loss, and using outcome studies to guide evidence-based clinical practice. After the establishment of standardized Mandarin language assessments, outcomes research in Mainland China has the potential to expand beyond auditory awareness and speech perception studies.

  19. SQUID Based Cryogenic Current Comparator for Measurements of the Dark Current of Superconducting Cavities

    CERN Document Server

    Vodel, W; Neubert, R; Nietzsche, S

    2005-01-01

    This contribution presents a LTS-SQUID based Cryogenic Current Comparator (CCC) for detecting dark currents, generated e.g. by superconducting cavities for the upcoming X-FEL project at DESY. To achieve the maximum possible energy the gradients of the superconducting RF cavities should be pushed close to the physical limit of 50 MV/m. The measurement of the undesired field emission of electrons (the so-called dark current) in correlation with the gradient will give a proper value to compare and classify the cavities. The main component of the CCC is a high performance LTS-DC SQUID system which is able to measure extremely low magnetic fields, e.g. caused by the extracted dark current. For this reason the input coil of the SQUID is connected across a special designed toroidal niobium pick-up coil (inner diameter: about 100 mm) for the passing electron beam. A noise limited current resolution of nearly 2 pA/√(Hz) with a measurement bandwidth of up to 70 kHz was achieved without the pick-up coil. Now, ...

  20. Simulation of leakage current measurement on medical devices using helmholtz coil configuration with different current flow

    Science.gov (United States)

    Sutanto, E.; Chandra, F.; Dinata, R.

    2017-05-01

    Leakage current measurement which can follow IEC standard for medical device is one of many challenges to be answered. The IEC 60601-1 has defined that the limit for a leakage current for Medical Device can be as low as 10 µA and as high as 500 µA, depending on which type of contact (applied part) connected to the patient. Most people are using ELCB (Earth-leakage circuit breaker) for safety purpose as this is the most common and available safety device in market. One type of ELCB devices is RCD (Residual Current Device) and this RCD type can measure the leakage current directly. This work will show the possibility on how Helmholtz Coil Configuration can be made to be like the RCD. The possibility is explored by comparing the magnetic field formula from each device, then it proceeds with a simulation using software EJS (Easy Java Simulation). The simulation will make sure the concept of magnetic field current cancellation follows the RCD concept. Finally, the possibility of increasing the measurement’s sensitivity is also analyzed. The sensitivity is needed to see the possibility on reaching the minimum leakage current limit defined by IEC, 0.01mA.

  1. Food parenting: a selective review of current measurement and an empirical examination to inform future measurement.

    Science.gov (United States)

    Musher-Eizenman, Dara R; Kiefner, Allison

    2013-08-01

    Interactions between parents and children in regard to food are an important part of the development of food preferences and intake patterns for children. The measurement of this complex and multidimensional construct is very challenging. This article examines the current status of measurement in this domain in a selective review, considers qualitative input from parents and adolescents in an empirical examination of the topic, and makes concrete recommendations for the future. Qualitatively, there were important differences between what the adolescents reported that their parents did to impact their eating habits, what parents of younger children report they currently do, and what researchers typically measure in research on parental feeding practices. On the basis of these empirical findings and our review of the literature, we recommend that food parenting be measured on three levels: Feeding styles (e.g., authoritative), food parenting practices (e.g., restriction), and specific feeding behaviors (e.g., putting food out of the child's reach). Specific recommendations for future study are given for each level of measurement.

  2. Evaluation of Leakage Current Measurement for Site Pollution Severity Assessment

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Shercat MASOUM

    2007-01-01

    Full Text Available Flashover of insulators in transmission and distribution systems may cause costly outages for power companies and their customers. Industrial and/or coastal pollution of external insulation is a major cause for such events at the normal power frequency voltage of the systems. The power companies are now facing increasing competition resulting in pressure to lower the cost and to increase the system reliability. Different methods have been applied in the past to overcome or reduce the problems with flashover on insulators. Methods which should provide reliable data under real physical conditions. In this paper several measuring methods to evaluate the pollution levels on outdoor insulators are described. According to this comparison, Leakage Current Measurement ‘LCM’ method is a reliable method for measurement leakage current in outdoor insulators and surge arresters.

  3. Bayesian flaw characterization from eddy current measurements with grain noise

    Science.gov (United States)

    McMahan, Jerry A.; Aldrin, John C.; Shell, Eric; Oneida, Erin

    2017-02-01

    The Bayesian approach to inference from measurement data has the potential to provide highly reliable characterizations of flaw geometry by quantifying the confidence in the estimate results. The accuracy of these confidence estimates depends on the accuracy of the model for the measurement error. Eddy current measurements of electrically anisotropic metals, such as titanium, exhibit a phenomenon called grain noise in which the measurement error is spatially correlated even with no flaw present. We show that the most commonly used statistical model for the measurement error, which fails to account for this correlation, results in overconfidence in the flaw geometry estimates from eddy current data, thereby reducing the effectiveness of the Bayesian approach. We then describe a method of modeling the grain noise as a Gaussian process (GP) using spectral mixture kernels, a type of non-parametric model for the covariance kernel of a GP This provides a broadly applicable, data-driven way of modeling correlation in measurement error. Our results show that incorporation of this noise model results in a more reliable estimate of the flaw and better agreement with the available validation data.

  4. Current major depressive syndrome measured with the Patient Health Questionnaire-9 (PHQ-9) and the Composite International Diagnostic Interview (CIDI): results from a cross-sectional population-based study of adults in Germany.

    Science.gov (United States)

    Maske, Ulrike E; Busch, Markus A; Jacobi, Frank; Beesdo-Baum, Katja; Seiffert, Ingeburg; Wittchen, Hans-Ulrich; Riedel-Heller, Steffi; Hapke, Ulfert

    2015-04-10

    Prevalence estimates for depression vary considerably by the type of assessment instrument, and there is limited information on their overlap in population-based samples. Our aim was to compare the Patient Health Questionnaire-9 (PHQ-9) with the Composite International Diagnostic Interview (CIDI) as measures for current major depressive syndrome (MDS) in a large population-based sample. Data derived from the mental health module of the nationwide cross-sectional German Health Interview and Examination Survey for Adults (DEGS1-MH) (n = 4483; age 18-79 years). MDS in the past two weeks was assessed (a) using the PHQ-9 diagnostic algorithm (PHQ-MDS) and (b) based on CIDI information about the latest symptom occurrence (recency) (CIDI-MDS). Prevalences, overall concordance and percentages of overlap of both MDS measures were determined. Prevalences of affirmed PHQ-9 depression symptoms and the mean and median PHQ-9 sum scores were analyzed per measure. Prevalence of current MDS was 2.7% (95% CI: 2.0-3.6) for PHQ-MDS and 3.9% (95% CI: 3.1-5.0) for CIDI-MDS. The overall agreement between both measures was moderate (kappa: 0.43). Of all the participants, 1.5% (95% CI: 1.0-2.2) were classified as MDS cases by both measures, with 54.5% (95% CI: 42.7-65.9) of PHQ-MDS cases and 37.9% (95% CI: 27.8-49.1) of CIDI-MDS cases also being classified as MDS by the respective other MDS measure. However, 94.8% (95% CI: 93.6-95.8) of the participants were classified as non-MDS by both measures, with 97.5% (95% CI: 96.6-98.1) of non-PHQ-MDS and 98.7% (95% CI: 98.2-99.1) of non-CIDI-MDS being classified as non-MDS by the respective other MDS measure. The mean and median PHQ-9 sum score was higher in those with PHQ-MDS than in those with CIDI-MDS. Both measures have a high level of agreement for ruling out current MDS, but the overlap in their classification of cases is moderate. Our results indicate that they cannot be interpreted as equal measures of the same construct, suggesting

  5. Spatially resolved voltage, current and electrochemical impedance spectroscopy measurements

    Energy Technology Data Exchange (ETDEWEB)

    Gerteisen, D.; Kurz, T.; Schwager, M.; Hebling, C. [Fraunhofer Institute for Solar Energy Systems ISE, Freiburg im Breisgau (Germany); Merida, W. [Clean Energy Research Centre, University of British Columbia, Vancouver, BC (Canada); Lupotto, P. [Materials Mates Italia, Milano (Italy)

    2011-04-15

    In this work a 50-channel characterisation system for PEMFCs is presented. The system is capable of traditional electrochemical measurements (e.g. staircase voltammetry, chronoamperometry and cyclic voltammetry), and concurrent EIS measurements. Unlike previous implementations, this system relies on dedicated potentiostats for current and voltage control, and independent frequency response analysers (FRAs) at each channel. Segmented fuel cell hardware is used to illustrate the system's flexibility and capabilities. The results here include steady-state data for cell characterisation under galvanostatic and potentiostatic control as well as spatially resolved impedance spectra. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  6. Assessing the Current State of Cognitive Frailty: Measurement Properties.

    Science.gov (United States)

    Sargent, L; Brown, R

    2017-01-01

    Currently, an estimated 25-30% of people ages 85 or older have dementia, with a projected 115 million people worldwide living with dementia by 2050. With this worldwide phenomenon fast approaching, early detection of at-risk older adults and development of interventions focused on preventing loss in quality of life are increasingly important. A new construct defined by the International Consensus Group (I.A.N.A/I.A.G.G) as «cognitive frailty» combines domains of physical frailty with cognitive impairment and provides a framework for research that may provide a means to identify individuals with cognitive impairment caused by nonneurodegenerative conditions. Using the integrative review method of Whittemore and Knafl., 2005 this study examines and appraises the optimal measures for detecting cognitive frailty in clinical populations of older adults. The integrative review was conducted using PubMed, CINAHL, Web of Science, PsycInfo, and ProQuest Dissertations and Theses. From the total 185 articles retrieved, review of titles and key words were conducted. Following the initial review, 168 articles did not meet the inclusion criteria for association of frailty and cognition. Of the 18 fulltext articles reviewed, 11 articles met the inclusion criteria; these articles were reviewed in-depth to determine validity and reliability of the cognitive frailty measures. Predictive validity was established by the studies reviewed in four main areas: frailty and type of dementia MCI (OR 7.4, 95% CI 4.2-13.2), vascular dementia (OR 6.7, 95% CI 1.6-27.4) and Alzheimer's dementia (OR 3.2, 95% CI 1.7-6.2), frailty and vascular dementia (VaAD) is further supported by the rate of change in frailty x macroinfarcts (r = 0.032, p < 0.001); frailty and the individual domains of cognitive function established with the relationship of neurocognitive speed and change in cognition using regression coefficients; individual components of frailty and individual domains of cognitive function

  7. AN INDUCTION SENSOR FOR MEASURING CURRENTS OF NANOSECOND RANGE

    Directory of Open Access Journals (Sweden)

    S. P. Shalamov

    2016-11-01

    Full Text Available Purpose. A current meter based on the principle of electromagnetic induction is designed to register the current flowing in the rod lightning. The aim of the article is to describe the way of increasing the sensitivity of the converter by means of their serial communication. Methodology. The recorded current is in the nanosecond range. If compared with other methods, meters based on the principle of electromagnetic induction have several advantages, such as simplicity of construction, reliability, low cost, no need in a power source, relatively high sensitivity. Creation of such a meter is necessary, because in some cases there is no possibility to use a shunt. Transient properties of a meter are determined by the number of turns and the constant of integration. Sensitivity is determined by measuring the number of turns, the coil sectional area, the core material and the integration constant. For measuring the magnetic field pulses with a rise time of 5 ns to 50 ns a meter has turns from 5 to 15. The sensitivity of such a meter is low. When the number of turns is increased, the output signal and the front increase. Earlier described dependencies were used to select the main parameters of the converter. It was based on generally accepted and widely known equivalent circuit. The experience of created earlier pulse magnetic field meters was considered both for measuring the magnetic fields, and large pulse current. Originality. Series connection of converters has the property of a long line. The level of the transient response of the meter is calculated. The influence of parasitic parameters on the type of meter transient response is examined. The shown construction was not previously described. Practical value. The results of meter implementation are given. The design peculiarities of the given measuring instruments are shown.

  8. Comparison of shipboard acoustic Doppler current profiler and moored current measurements in the Equatorial Pacific

    Science.gov (United States)

    Chereskin, T. K.; Regier, L. A.; Halpern, D.

    1987-01-01

    Depth-averaged current shears computed from shipboard acoustic Doppler current profiler (ADCP) and moored Savonius rotor and vane vector-averaging current meter (VACM) measurements are compared at 35, 62.5, 100 and 140 m depths within 7 km of each other near 0 deg, 140 deg W during a 12-day interval in November 1984. The agreement between the VACM and ADCP shears was excellent. The average root-mean-square difference of hourly shear values was small, approximately 0.0021/s, and the average correlation coefficient was 0.90. Spectral estimates were equivalent to within a 95 percent significance level and the VACM and ADCP shears were 95 percent statistically coherent with zero phase difference for frequencies below 0.2 cycles per hour.

  9. Current Practice in Measuring the Quality of Conceptual Models:Challenges and Research%Current Practice in Measuring the Quality of Conceptual Models:Challenges and Research

    Institute of Scientific and Technical Information of China (English)

    LIU Lei; WU Yu-feng; LI Xiao-jun

    2012-01-01

    How to measure the quality of conceptual models is an important issue in the IS field and related research. This paper conducts a review of research in measuring conceptual model quality and identifies the major theoretical and practical issues that need to be addressed in future studies. We review current classification frameworks for conceptual model quality and practice of measuring conceptual model quality. Based on the review, challenges for studies of measuring the quality of conceptual models are proposed and these challenges are also research points which should be strengthened in future studies.

  10. Measuring the corrosion rate of steel in concrete – effect of measurement technique, polarisation time and current

    DEFF Research Database (Denmark)

    Nygaard, Peter Vagn; Geiker, Mette Rica

    2012-01-01

    Both on-site investigations and laboratory studies have shown that different corrosion rates are obtained when different commercially available corrosion rate instruments are used. The different electrochemical techniques and the measurement parameters used, i.e. polarisation current and time......, are in some studies considered the main reasons for the variations. This paper presents an experimental study on the quantitative effect of polarisation time and current on the measured polarisation resistance – and thus the corrosion current density – of passively and actively corroding steel. Two...... electrochemical techniques often used in instruments for on-site corrosion rate measurements are investigated. On passively corroding reinforcement the measured polarisation resistance was for both techniques found to be highly affected by the polarisation time and current and no plateaus at either short or long...

  11. Direct-current proton-beam measurements at Los Alamos

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, J.; Stevens, R.R.; Schneider, J.D.; Zaugg, T.

    1994-08-01

    Recently, a CW proton accelerator complex was moved from Chalk River Laboratories (CRL) to Los Alamos National Laboratory. This includes a 50-keV dc proton injector with a single-solenoid low-energy beam transport system (LEBT) and a CW 1.25-MeV, 267-MHz radiofrequency quadrupole (RFQ). The move was completed after CRL had achieved 55-mA CW operation at 1.25 MeV using 250-kW klystrode tubes to power the RFQ. These accelerator components are prototypes for the front end of a CW linac required for an accelerator-driven transmutation linac, and they provide early confirmation of some CW accelerator components. The injector (ion source and LEBT) and emittance measuring unit are installed and operational at Los Alamos. The dc microwave ion source has been operated routinely at 50-keV, 75-mA hydrogen-ion current. This ion source has demonstrated very good discharge and H{sub 2} gas efficiencies, and sufficient reliability to complete CW RFQ measurements at CRL. Proton fraction of 75% has been measured with 550-W discharge power. This high proton fraction removes the need for an analyzing magnet. Proton LEBT emittance measurements completed at Los Alamos suggest that improved transmission through the RFQ may be achieved by increasing the solenoid focusing current. Status of the final CW RFQ operation at CRL and the installation of the RFQ at Los Alamos is given.

  12. Resonant Strip Line BPM for Ultra Low Current Measurements

    CERN Document Server

    Dehler, M

    2005-01-01

    Proton beams used in proton therapy facilities like PROSCAN have extremely small currents of an order of 1 nA, which create a challenge for a precise beam position measurements due to their extremely low signal level und subsequent bad signal per noise ratios. For suitable power levels with thse currents, pickups need to have a high shunt impedance, something, which is difficult to design for wide band devices. So for a new stripline bpm design, the coupling of the signal outputs to the electrode was deliberately mismatched to create a resonance at the second harmonic of the RF frequency at 150 MHz. The optimum Q-factor to use is given by the coupling between the bpm electrodes leading to to a Q of 100, an overall shunt impedance of 4 kΩ and power output levels of an order of -120 dBm at the design current of 1 nA. A prototype of the devicehas been manufactured, first measurement results will be presented.

  13. Nausea: current knowledge of mechanisms, measurement and clinical impact.

    Science.gov (United States)

    Kenward, Hannah; Pelligand, Ludovic; Savary-Bataille, Karine; Elliott, Jonathan

    2015-01-01

    Nausea is a subjective sensation, which often acts as a signal that emesis is imminent. It is a widespread problem that occurs as a clinical sign of disease or as an adverse effect of a drug therapy or surgical procedure. The mechanisms of nausea are complex and the neural pathways are currently poorly understood. This review summarises the current knowledge of nausea mechanisms, the available animal models for nausea research and the anti-nausea properties of commercially available anti-emetic drugs. The review also presents subjective assessment and scoring of nausea. A better understanding of the underlying mechanisms of nausea might reveal potential clinically useful biomarkers for objective measurement of nausea in species of veterinary interest.

  14. High-temperature strain measurement techniques: Current developments and challenges

    Science.gov (United States)

    Lemcoe, M. M.

    1992-01-01

    Since 1987, a very substantial amount of R&D has been conducted in an attempt to develop reliable strain sensors for the measurements of structural strains during ground testing and hypersonic flight, at temperatures up to at least 2000 deg F. Much of the effort has been focused on requirements of the NASP Program. This presentation is limited to the current sensor development work and characterization studies carried out within that program. It is basically an assessment as to where we are now and what remains to be done in the way of technical accomplishments to meet the technical challenges posed by the requirements and constraints established for the NASP Program. The approach for meeting those requirements and constraints has been multi-disciplinary in nature. It was recognized early on that no one sensor could meet all these requirements and constraints, largely because of the large temperature range (cryogenic to at least 2000 deg F) and many other factors, including the most challenging requirement that the sensor system be capable of obtaining valid 'first cycle data'. Present candidate alloys for resistance-type strain gages include Fe-Cr-Al and Pd-Cr. Although they have superior properties regarding withstanding very high temperatures, they exhibit large apparent strains that must either be accounted for or cancelled out by various techniques, including the use of a dual-element, half-bridge dummy gage, or electrical compensation networks. A significant effort is being devoted to developing, refining, and evaluating the effectiveness of those techniques over a broad range in temperature and time. In the quest to obtain first-cycle data, ways must be found to eliminate the need to prestabilize or precondition the strain gage, before it is attached to the test article. It should be noted that present NASP constraints do not permit prestabilization of the sensor, in situ. Gages are currently being 'heat treated' during manufacture in both the wire- and foil

  15. AN EMPIRICAL STUDY OF CURRENT RATIO

    Directory of Open Access Journals (Sweden)

    Atanas Delev

    2014-10-01

    Full Text Available This work aims to address problems of liquidity and in particular the values and factors that influenced the values of the coefficient of total liquidity sixty Bulgarian public companies for the period 2013 - 2007 year. In the analysis it was found that some businesses fail to achieve favorable values of the ratio between current assets and current liabilities. It was found that plants have a low level of total liquidity, which can create problems in repayment of short-term liabilities. It can be seen that there are companies with very high liquidity, which is not so good phenomenon, ie the retention of a high level of resources required. Businesses should conduct a thorough analysis and implement appropriate measures to correct adverse changes. The financial management of the companies surveyed had worked towards improving the state of the enterprise, thereby seeking to reduce liquidity risk.

  16. The Current Economic Crisis: Effects, Consequences, Measures and Solutions

    Directory of Open Access Journals (Sweden)

    Liana-Antonela BONTA (cas. MITEA

    2012-09-01

    Full Text Available The main objective of the present research project is the current economiccrisis, its effects, consequences but especially the measures and the solutions that we can find to resolve this situation. A key problem preoccupying developing countries today is the global economic crisis and how they can address it. The epicenter of the crisis is in the developed countries, especially the USA. But the developing countries that have no role in causing the crisis have suffered the most severe “collateral damage”. I will try to present the similarities with other periods of recession that we have crossed-over time. I will propose a few measures to remedy this situation, both long-term and short-term, referring of course to Romania and EU as well.

  17. Current Measurements of Low-Intensity Beams at CRYRING

    CERN Document Server

    Paál, A; Källberg, A

    2003-01-01

    The demand for new ion species leads to an increasing number of cases in which the ions can only be produced in small quantities. Thus, weak ion currents quite often have to be handled in low energy ion storage ring, like CRYRING. Various detector systems have been developed to measure such low intensity coasting and bunched beams by using the overlapping ranges of those systems. We have extended the RMS resolution to 1 nA of the Bergoz Beam Charge Monitor (BCM) by using a low noise 60 dB preamplifier for the Integrating Current Transformer. The sum signal of a capacitive pick-up is integrated by a second gated integrator and the BCM output signal is used for calibration. The RMS resolution is about 100 pA.. To measure the coasting beam intensity, neutral particle detectors have been built. The fast Microchannel plate detector can handle 1 Mc/s, and a 50 Mc/s Secondary Electron Multiplier based detector is under construction. On the magnetic flat top, a time of 100 ms is available to calibrate the count r...

  18. The ENIQ pilot study: current status

    Energy Technology Data Exchange (ETDEWEB)

    Lemaitre, P.; Eriksen, B.; Crutzen, S. [European Commission, DG Joint Research Centre, Petten (Netherlands); Hansch, M. [Preussische Elektrizitaets-AG (Preussenelektra), Hannover (Germany); Whittle, J. [AEA Technology, Warrington (United Kingdom)

    1998-11-01

    A pilot study is currently being carried out by ENIQ (European Network for Inspection Qualification) in order to explore the issues involved in inspection qualification applied along the general principles of the European methodology. The components selected for the pilot study are austenitic pipe to pipe and pipe to elbows welds typical of those in BWR recirculation loops. A range of defect parameters has been defined. A suitable inspection procedure designed to find the designated defects will be applied to geometrically representative test pieces. The procedure/equipment will be qualified through open trials and technical justification. The personnel qualification will be done in a blind way. Once all features of the inspection system will have been qualified an in-service inspection will be simulated in order to test the feasibility of the qualification approach followed. In this paper the current status of this pilot study is discussed. (orig.)

  19. Atmospheric Point Discharge Currents measured with a bi-polar logarithmic current amplifier

    Science.gov (United States)

    Marlton, G.; Harrison, R. G.; Nicoll, K. A.

    2013-09-01

    Point Discharge Currents (PDC) flow in conductors exposed to the atmosphere when strong ambient electric fields cause breakdown of air. This can occur because of field intensification around a sharp point. In some cases point discharge can even become visible, known as St Elmo's fire, one of the longest recognized phenomena in atmospheric electricity. Due to the wide range of magnitudes of currents of both polarities encountered in measuring PDCs, a bipolar logarithmic current amplifier is used here for atmospheric investigations. During an installation at the Reading Atmospheric observatory, it was able to detect PDC of magnitude 0.5μA during periods of strong electric fields, in disturbed weather. Two useful attributes for planetary applications have been suggested by these experiments. Firstly, it is sufficiently compact and light-weight that it seems appropriate for planetary exploration of the electrical properties of atmospheres. Secondly its wide bi polar logarithmic range (~ pA to uA) makes it robust enough to provide useful data despite the environment in which it is deployed being poorly quantified.

  20. Critical current studies of a HTS rectangular coil

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Z. [Department of Engineering, University of Cambridge (United Kingdom); Chudy, M., E-mail: Michal.chudy@stuba.sk [Graduate School of Technology Management, University of Pretoria (South Africa); Institute of Power and Applied Electrical Engineering, Slovak University of Technology in Bratislava (Slovakia); Ruiz, H.S. [Department of Engineering, University of Leicester, Leicester LE1 7RH (United Kingdom); Zhang, X.; Coombs, T. [Department of Engineering, University of Cambridge (United Kingdom)

    2017-05-15

    Highlights: • Unique square pancake coil was manufactured. • Measurements in relatively high magnetic field were performed. • Different sections of the coil were characterized. • Parts of the coil which are limiting critical current were identified. - Abstract: Nowadays, superconducting high field magnets are used in numerous applications due to their superior properties. High temperature superconductors (HTS) are usually used for production of circular pancake or racetrack coils. However different geometries of HTS coils might be required for some specific applications. In this study, the HTS coil wound on a rectangular frame was fully characterized in homogeneous DC background field. The study contains measurements of critical current angular dependencies. The critical current of the entire coil and two selected strands under different magnitudes and orientations of external magnetic fields are measured. The critical regions of the coil in different angular regimes are determined. This study brings better understanding of the in- field performance of HTS coils wound on frames with right-angles.

  1. [Current registry studies of acute ischemic stroke].

    Science.gov (United States)

    Veltkamp, R; Jüttler, E; Pfefferkorn, T; Purrucker, J; Ringleb, P

    2012-10-01

    Study registries offer the opportunity to evaluate the effects of new therapies or to observe the consequences of new treatments in clinical practice. The SITS-MOST registry confirmed the validity of findings from randomized trials on intravenous thrombolysis concerning safety and efficacy in the clinical routine. Current study registries concerning new interventional thrombectomy techniques suggest a high recanalization rate; however, the clinical benefit can only be evaluated in randomized, controlled trials. Similarly, the experiences of the BASICS registry on basilar artery occlusion have led to the initiation of a controlled trial. The benefit of hemicraniectomy in malignant middle cerebral artery infarction has been demonstrated by the pooled analysis of three randomized trials. Numerous relevant aspects are currently documented in the DESTINY-R registry. Finally, the recently started RASUNOA registry examines diagnostic and therapeutic aspects of ischemic and hemorrhagic stroke occurring during therapy with new oral anticoagulants.

  2. Current assessment practice, personality measurement, and rorschach usage by psychologists.

    Science.gov (United States)

    Musewicz, John; Marczyk, Geoffrey; Knauss, Linda; York, David

    2009-09-01

    In this study, we investigated current personality assessment practice and attitudes toward Rorschach (Exner, 2003) usage by 215 psychologists. We administered an Internet survey to members of the Society for Personality Assessment (SPA) and the American Psychological Association. Results were similar to those of past surveys, but the importance of using tests with strong psychometric properties was greater in this study. The majority of respondents reported using the Rorschach and supporting efforts to standardize and psychometrically validate the test. However, SPA members agreed more strongly than non-SPA members that the Rorschach is an effective test. Implications and directions for future research are discussed.

  3. Measurement of charm in charged current at HERA

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, Tobias

    2008-12-15

    A measurement of charm production in charged current (CC) polarized electron-proton deep inelastic scattering processes with data from the H1 detector at the HERA collider is presented. This process in principle allows access to the strange quark density in the proton. In total 5460 CC candidate events in e{sup +}p and 6253 in e{sup -}p data are selected in the kinematic range Q{sup 2}>223 GeV{sup 2} and 0.03measured CC cross sections are {sigma}{sub CC}=(28.9{+-} 1.4)+P{sub e}.(28.6{+-}4.7) pb for e{sup +}p and {sigma}{sub CC}=(49.2{+-}2.3)-P{sub e}.(42.5 {+-}6.8) pb for e{sup -}p, where P{sub e} is the lepton beam polarization. While the measured cross section for e{sup +}p data is in agreement with the theoretical prediction, the cross section for e{sup -}p data shows a weaker dependence on P{sub e} than predicted. The charm fractions in the selected CC candidate event samples are extracted using the muon charge asymmetry. Muons originating from charmed hadron decays in CC events at HERA always have the same charge as the beam lepton. The extracted charm fractions in the selected CC candidate event samples are F{sub c}=9.5{+-}8.9{+-}3.0 % for e{sup +}p and F{sub c}=4.4{+-}6.9{+-}2.6 % for e{sup -}p. Due to the large statistical errors of the measured charm fractions, the strange quark density in the proton has not been extracted. (orig.)

  4. Current Status and Control Measures of Ecological Restoration in Karst Rocky Desertification Area of Guizhou

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    [Objective] The aim was to analyze the current status and control measures of ecological restoration in Karst rocky desertification area of Guizhou.[Method] The current status and existing problems of ecological restoration in Karst rocky desertification area of Guizhou were studied firstly,and main control measures were put forward according to existing problems.[Result] At present,Karst rocky desertification area in Guizhou has suitable ecological environment,obvious control results and rich control exper...

  5. Air Flow Measurements During Medium-Voltage Load Current Interruptions

    OpenAIRE

    Aanensen, Nina Sasaki; Runde, Magne

    2015-01-01

    Air has been considered a good alternative to SF6 as arc quenching medium for load break switchgear at medium voltage ratings. In this work, the air flow characteristics and influence from the electric arc have been studied for typical currents and over-pressures. The cooling air velocity is typically in the range 150 - 200 m/s and thus well below supersonic speed. The arc and the surrounding hot air severely affect the air flow pattern by causing clogging in the contact and nozzle region.

  6. Determination of the electronics transfer function for current transient measurements

    CERN Document Server

    Scharf, Christian

    2014-01-01

    We describe a straight-forward method for determining the transfer function of the readout of a sensor for the situation in which the current transient of the sensor can be precisely simulated. The method relies on the convolution theorem of Fourier transforms. The specific example is a planar silicon pad diode connected with a 50 $\\Omega $ cable to an amplifier followed by a 5 GS/s sampling oscilloscope. The charge carriers in the sensor were produced by picosecond lasers with light of wavelengths of 675 and 1060 nm. The transfer function is determined from the 1060 nm data with the pad diode biased at 1000 V. It is shown that the simulated sensor response convoluted with this transfer function provides an excellent description of the measured transients for the laser light of both wavelengths, at voltages 50 V above the depletion voltage of about 90 V up to the maximum applied voltage of 1000 V. The method has been developed for the precise measurement of the dependence of the drift velocity of electrons an...

  7. Study of the weak charged hadronic current in b decays

    Science.gov (United States)

    Acciarri, M.; Adriani, O.; Aguilar-Benitez, M.; Ahlen, S.; Alpat, B.; Alcaraz, J.; Alemanni, G.; Allaby, J.; Aloisio, A.; Alverson, G.; Alviggi, M. G.; Ambrosi, G.; Anderhub, H.; Andreev, V. P.; Angelescu, T.; Anselmo, F.; Antreasyan, D.; Arefiev, A.; Azemoon, T.; Aziz, T.; Bagnaia, P.; Baksay, L.; Ball, R. C.; Banerjee, S.; Banicz, K.; Barillère, R.; Barone, L.; Bartalini, P.; Baschirotto, A.; Basile, M.; Battiston, R.; Bay, A.; Becattini, F.; Becker, U.; Behner, F.; Berdugo, J.; Berges, P.; Bertucci, B.; Betev, B. L.; Bhattacharya, S.; Biasini, M.; Biland, A.; Bilei, G. M.; Blaising, J. J.; Blyth, S. C.; Bobbink, G. J.; Bock, R.; Böhm, A.; Borgia, B.; Boucham, A.; Bourilkov, D.; Bourquin, M.; Boutigny, D.; Branson, J. G.; Brigljevic, V.; Brock, I. C.; Buffini, A.; Buijs, A.; Burger, J. D.; Burger, W. J.; Busenitz, J.; Buytenhuijs, A.; Cai, X. D.; Campanelli, M.; Capell, M.; Romeo, G. Cara; Caria, M.; Carlino, G.; Cartacci, A. M.; Casaus, J.; Castellini, G.; Cavallari, F.; Cavallo, N.; Cecchi, C.; Cerrada, M.; Cesaroni, F.; Chamizo, M.; Chan, A.; Chang, Y. H.; Chaturvedi, U. K.; Chemarin, M.; Chen, A.; Chen, G.; Chen, G. M.; Chen, H. F.; Chen, H. S.; Chen, M.; Chiefari, G.; Chien, C. Y.; Choi, M. T.; Cifarelli, L.; Cindolo, F.; Civinini, C.; Clare, I.; Clare, R.; Cohn, H. O.; Coignet, G.; Colijn, A. P.; Colino, N.; Commichau, V.; Costantini, S.; Cotorobai, F.; de La Cruz, B.; Csilling, A.; Dai, T. S.; D'Alessandro, R.; de Asmundis, R.; de Boeck, H.; Degré, A.; Deiters, K.; Denes, P.; Denotaristefani, F.; Dibitonto, D.; Diemoz, M.; van Dierendonck, D.; di Lodovico, F.; Dionisi, C.; Dittmar, M.; Dominguez, A.; Doria, A.; Dorne, I.; Dova, M. T.; Drago, E.; Duchesneau, D.; Duinker, P.; Duran, I.; Dutta, S.; Easo, S.; Efremenko, Yu.; El Mamouni, H.; Engler, A.; Eppling, F. J.; Erné, F. C.; Ernenwein, J. P.; Extermann, P.; Fabre, M.; Faccini, R.; Falciano, S.; Favara, A.; Fay, J.; Fedin, O.; Felcini, M.; Fenyi, B.; Ferguson, T.; Fernandez, D.; Ferroni, F.; Fesefeldt, H.; Fiandrini, E.; Field, J. H.; Filthaut, F.; Fisher, P. H.; Forconi, G.; Fredj, L.; Freudenreich, K.; Furetta, C.; Galaktionov, Yu.; Ganguli, S. N.; Garcia-Abia, P.; Gau, S. S.; Gentile, S.; Gerald, J.; Gheordanescu, N.; Giagu, S.; Goldfarb, S.; Goldstein, J.; Gong, Z. F.; Gougas, A.; Gratta, G.; Gruenewald, M. W.; Gupta, V. K.; Gurtu, A.; Gutay, L. J.; Hartmann, B.; Hasan, A.; Hatzifotiadou, D.; Hebbeker, T.; Hervé, A.; van Hoek, W. C.; Hofer, H.; Hoorani, H.; Hou, S. R.; Hu, G.; Innocente, V.; Janssen, H.; Jenkes, K.; Jin, B. N.; Jones, L. W.; de Jong, P.; Josa-Mutuberria, I.; Kasser, A.; Khan, R. A.; Kamrad, D.; Kamyshkov, Yu.; Kapustinsky, J. S.; Karyotakis, Y.; Kaur, M.; Kienzle-Focacci, M. N.; Kim, D.; Kim, J. K.; Kim, S. C.; Kim, Y. G.; Kinnison, W. W.; Kirkby, A.; Kirkby, D.; Kirkby, J.; Kiss, D.; Kittel, W.; Klimentov, A.; König, A. C.; Korolko, I.; Koutsenko, V.; Kraemer, R. W.; Krenz, W.; Kuijten, H.; Kunin, A.; de Guevara, P. Ladron; Landi, G.; Lapoint, C.; Lassila-Perini, K.; Laurikainen, P.; Lebeau, M.; Lebedev, A.; Lebrun, P.; Lecomte, P.; Lecoq, P.; Le Coultre, P.; Lee, J. S.; Lee, K. Y.; Leggett, C.; Le Goff, J. M.; Leiste, R.; Leonardi, E.; Levtchenko, P.; Li, C.; Lieb, E.; Lin, W. T.; Linde, F. L.; Lista, L.; Liu, Z. A.; Lohmann, W.; Longo, E.; Lu, W.; Lu, Y. S.; Lübelsmeyer, K.; Luci, C.; Luckey, D.; Luminari, L.; Lustermann, W.; Ma, W. G.; Maity, M.; Majumder, G.; Malgeri, L.; Malinin, A.; Maña, C.; Mangla, S.; Marchesini, P.; Marin, A.; Martin, J. P.; Marzano, F.; Massaro, G. G. G.; McNally, D.; Mele, S.; Merola, L.; Meschini, M.; Metzger, W. J.; von der Mey, M.; Mi, Y.; Mihul, A.; van Mil, A. J. W.; Mirabelli, G.; Mnich, J.; Molnar, P.; Monteleoni, B.; Moore, R.; Morganti, S.; Moulik, T.; Mount, R.; Müller, S.; Muheim, F.; Nagy, E.; Nahn, S.; Napolitano, M.; Nessi-Tedaldi, F.; Newman, H.; Niessen, T.; Nippe, A.; Nisati, A.; Nowak, H.; Opitz, H.; Organtini, G.; Ostonen, R.; Pandoulas, D.; Paoletti, S.; Paolucci, P.; Park, H. K.; Pascale, G.; Passaleva, G.; Patricelli, S.; Paul, T.; Pauluzzi, M.; Paus, C.; Pauss, F.; Peach, D.; Pei, Y. J.; Pensotti, S.; Perret-Gallix, D.; Petrak, S.; Pevsner, A.; Piccolo, D.; Pieri, M.; Pinto, J. C.; Piroué, P. A.; Pistolesi, E.; Plyaskin, V.; Pohl, M.; Pojidaev, V.; Postema, H.; Produit, N.; Prokofiev, D.; Rahal-Callot, G.; Rancoita, P. G.; Rattaggi, M.; Raven, G.; Razis, P.; Read, K.; Ren, D.; Rescigno, M.; Reucroft, S.; van Rhee, T.; Riemann, S.; Riemers, B. C.; Riles, K.; Rind, O.; Ro, S.; Robohm, A.; Rodin, J.; Rodriguez, F. J.; Roe, B. P.; Romero, L.; Rosier-Lees, S.; Rosselet, Ph.; van Rossum, W.; Roth, S.; Rubio, J. A.; Rykaczewski, H.; Salicio, J.; Sanchez, E.; Santocchia, A.; Sarakinos, M. E.; Sarkar, S.; Sassowsky, M.; Sauvage, G.; Schäfer, C.; Schegelsky, V.; Schmidt-Kaerst, S.; Schmitz, D.; Schmitz, P.; Schneegans, M.; Scholz, N.; Schopper, H.; Schotanus, D. J.; Schwenke, J.; Schwering, G.; Sciacca, C.; Sciarrino, D.; Sens, J. C.; Servoli, L.; Shevchenko, S.; Shivarov, N.; Shoutko, V.; Shukla, J.; Shumilov, E.; Shvorob, A.; Siedenburg, T.; Son, D.; Sopczak, A.; Soulimov, V.; Smith, B.; Spillantini, P.; Steuer, M.; Stickland, D. P.; Stone, H.; Stoyanov, B.; Straessner, A.; Strauch, K.; Sudhakar, K.; Sultanov, G.; Sun, L. Z.; Susinno, G. F.; Suter, H.; Swain, J. D.; Tang, X. W.; Tauscher, L.; Taylor, L.; Ting, Samuel C. C.; Ting, S. M.; Tonutti, M.; Tonwar, S. C.; Tóth, J.; Tully, C.; Tuchscherer, H.; Tung, K. L.; Uchida, Y.; Ulbricht, J.; Uwer, U.; Valente, E.; van de Walle, R. T.; Vesztergombi, G.; Vetlitsky, I.; Viertel, G.; Vivargent, M.; Völkert, R.; Vogel, H.; Vogt, H.; Vorobiev, I.; Vorobyov, A. A.; Vorvolakos, A.; Wadhwa, M.; Wallraff, W.; Wang, J. C.; Wang, X. L.; Wang, Z. M.; Weber, A.; Wittgenstein, F.; Wu, S. X.; Wynhoff, S.; Xu, J.; Xu, Z. Z.; Yang, B. Z.; Yang, C. G.; Yao, X. Y.; Ye, J. B.; Yeh, S. C.; You, J. M.; Zalite, An.; Zalite, Yu.; Zemp, P.; Zeng, Y.; Zhang, Z.; Zhang, Z. P.; Zhou, B.; Zhou, Y.; Zhu, G. Y.; Zhu, R. Y.; Zichichi, A.; Ziegler, F.

    1997-02-01

    Charged and neutral particle multiplicities of jets associated with identified semileptonic and hadronic b decays are studied. The observed differences between these jets are used to determine the inclusive properties of the weak charged hadronic current. The average charged particle multiplicity of the weak charged hadronic current in b decays is measured for the first time to be 2.69+/-0.07 (stat.)+/-0.14(syst.). This result is in good agreement with the JETSET hadronization model of the weak charged hadronic current if 40+/-17% of the produced mesons are light-flavored tensor (L=1) mesons. This level of tensor meson production is consistent with the measurement of the π0 multiplicity in the weak charged hadronic current in b decays.

  8. Study of the Weak Charged Hadronic Current in b Decays

    CERN Document Server

    Acciarri, M; Aguilar-Benítez, M; Ahlen, S P; Alpat, B; Alcaraz, J; Alemanni, G; Allaby, James V; Aloisio, A; Alverson, G; Alviggi, M G; Ambrosi, G; Anderhub, H; Andreev, V P; Angelescu, T; Anselmo, F; Antreasyan, D; Arefev, A; Azemoon, T; Aziz, T; Bagnaia, P; Baksay, L; Ball, R C; Banerjee, S; Banicz, K; Barillère, R; Barone, L; Bartalini, P; Baschirotto, A; Basile, M; Battiston, R; Bay, A; Becattini, F; Becker, U; Behner, F; Berdugo, J; Berges, P; Bertucci, B; Betev, B L; Bhattacharya, S; Biasini, M; Biland, A; Bilei, G M; Blaising, J J; Blyth, S C; Bobbink, Gerjan J; Böck, R K; Böhm, A; Borgia, B; Boucham, A; Bourilkov, D; Bourquin, Maurice; Boutigny, D; Branson, J G; Brigljevic, V; Brock, I C; Buffini, A; Buijs, A; Burger, J D; Burger, W J; Busenitz, J K; Buytenhuijs, A O; Cai, X D; Campanelli, M; Capell, M; Cara Romeo, G; Caria, M; Carlino, G; Cartacci, A M; Casaus, J; Castellini, G; Cavallari, F; Cavallo, N; Cecchi, C; Cerrada-Canales, M; Cesaroni, F; Chamizo-Llatas, M; Chan, A; Chang, Y H; Chaturvedi, U K; Chemarin, M; Chen, A; Chen, G; Chen, G M; Chen, H F; Chen, H S; Chen, M; Chiefari, G; Chien, C Y; Choi, M T; Cifarelli, Luisa; Cindolo, F; Civinini, C; Clare, I; Clare, R; Cohn, H O; Coignet, G; Colijn, A P; Colino, N; Commichau, V; Costantini, S; Cotorobai, F; de la Cruz, B; Csilling, Akos; Dai, T S; D'Alessandro, R; De Asmundis, R; De Boeck, H; Degré, A; Deiters, K; Denes, P; De Notaristefani, F; DiBitonto, Daryl; Diemoz, M; Van Dierendonck, D N; Di Lodovico, F; Dionisi, C; Dittmar, Michael; Dominguez, A; Doria, A; Dorne, I; Dova, M T; Drago, E; Duchesneau, D; Duinker, P; Durán, I; Dutta, S; Easo, S; Efremenko, Yu V; El-Mamouni, H; Engler, A; Eppling, F J; Erné, F C; Ernenwein, J P; Extermann, Pierre; Fabre, M; Faccini, R; Falciano, S; Favara, A; Fay, J; Fedin, O; Felcini, Marta; Fenyi, B; Ferguson, T; Fernández, D; Ferroni, F; Fesefeldt, H S; Fiandrini, E; Field, J H; Filthaut, Frank; Fisher, P H; Forconi, G; Fredj, L; Freudenreich, Klaus; Furetta, C; Galaktionov, Yu; Ganguli, S N; García-Abia, P; Gau, S S; Gentile, S; Gerald, J; Gheordanescu, N; Giagu, S; Goldfarb, S; Goldstein, J; Gong, Z F; Gougas, Andreas; Gratta, Giorgio; Grünewald, M W; Gupta, V K; Gurtu, A; Gutay, L J; Hartmann, B; Hasan, A; Hatzifotiadou, D; Hebbeker, T; Hervé, A; Van Hoek, W C; Hofer, H; Hoorani, H; Hou, S R; Hu, G; Innocente, Vincenzo; Janssen, H; Jenkes, K; Jin, B N; Jones, L W; de Jong, P; Josa-Mutuberria, I; Kasser, A; Khan, R A; Kamrad, D; Kamyshkov, Yu A; Kapustinsky, J S; Karyotakis, Yu; Kaur, M; Kienzle-Focacci, M N; Kim, D; Kim, J K; Kim, S C; Kim, Y G; Kinnison, W W; Kirkby, A; Kirkby, D; Kirkby, Jasper; Kiss, D; Kittel, E W; Klimentov, A; König, A C; Korolko, I; Koutsenko, V F; Krämer, R W; Krenz, W; Kuijten, H; Kunin, A; Ladrón de Guevara, P; Landi, G; Lapoint, C; Lassila-Perini, K M; Laurikainen, P; Lebeau, M; Lebedev, A; Lebrun, P; Lecomte, P; Lecoq, P; Le Coultre, P; Lee Jae Sik; Lee, K Y; Leggett, C; Le Goff, J M; Leiste, R; Leonardi, E; Levchenko, P M; Li Chuan; Lieb, E H; Lin, W T; Linde, Frank L; Lista, L; Liu, Z A; Lohmann, W; Longo, E; Lu, W; Lü, Y S; Lübelsmeyer, K; Luci, C; Luckey, D; Luminari, L; Lustermann, W; Ma Wen Gan; Maity, M; Majumder, G; Malgeri, L; Malinin, A; Maña, C; Mangla, S; Marchesini, P A; Marin, A; Martin, J P; Marzano, F; Massaro, G G G; McNally, D; Mele, S; Merola, L; Meschini, M; Metzger, W J; Von der Mey, M; Mi, Y; Mihul, A; Van Mil, A J W; Mirabelli, G; Mnich, J; Molnár, P; Monteleoni, B; Moore, R; Morganti, S; Moulik, T; Mount, R; Müller, S; Muheim, F; Nagy, E; Nahn, S; Napolitano, M; Nessi-Tedaldi, F; Newman, H; Nippe, A; Nisati, A; Nowak, H; Opitz, H; Organtini, G; Ostonen, R; Pandoulas, D; Paoletti, S; Paolucci, P; Park, H K; Pascale, G; Passaleva, G; Patricelli, S; Paul, T; Pauluzzi, M; Paus, C; Pauss, Felicitas; Peach, D; Pei, Y J; Pensotti, S; Perret-Gallix, D; Petrak, S; Pevsner, A; Piccolo, D; Pieri, M; Pinto, J C; Piroué, P A; Pistolesi, E; Plyaskin, V; Pohl, M; Pozhidaev, V; Postema, H; Produit, N; Prokofev, D; Prokofiev, D O; Rahal-Callot, G; Rancoita, P G; Rattaggi, M; Raven, G; Razis, P A; Read, K; Ren, D; Rescigno, M; Reucroft, S; Van Rhee, T; Riemann, S; Riemers, B C; Riles, K; Rind, O; Ro, S; Robohm, A; Rodin, J; Rodríguez-Calonge, F J; Roe, B P; Romero, L; Rosier-Lees, S; Rosselet, P; Van Rossum, W; Roth, S; Rubio, Juan Antonio; Rykaczewski, H; Salicio, J; Sánchez, E; Santocchia, A; Sarakinos, M E; Sarkar, S; Sassowsky, M; Sauvage, G; Schäfer, C; Shchegelskii, V; Schmidt-Kärst, S; Schmitz, D; Schmitz, P; Schneegans, M; Scholz, N; Schopper, Herwig Franz; Schotanus, D J; Schwenke, J; Schwering, G; Sciacca, C; Sciarrino, D; Sens, Johannes C; Servoli, L; Shevchenko, S; Shivarov, N; Shoutko, V; Shukla, J; Shumilov, E; Shvorob, A V; Siedenburg, T; Son, D; Sopczak, André; Soulimov, V; Smith, B; Spillantini, P; Steuer, M; Stickland, D P; Stone, H; Stoyanov, B; Strässner, A; Strauch, K; Sudhakar, K; Sultanov, G G; Sun, L Z; Susinno, G F; Suter, H; Swain, J D; Tang, X W; Tauscher, Ludwig; Taylor, L; Ting, Samuel C C; Ting, S M; Tonutti, M; Tonwar, S C; Tóth, J; Tully, C; Tuchscherer, H; Tung, K L; Uchida, Y; Ulbricht, J; Uwer, U; Valente, E; Van de Walle, R T; Vesztergombi, G; Vetlitskii, I; Viertel, Gert M; Vivargent, M; Völkert, R; Vogel, H; Vogt, H; Vorobev, I; Vorobyov, A A; Vorvolakos, A; Wadhwa, M; Wallraff, W; Wang, J C; Wang, X L; Wang, Z M; Weber, A; Wittgenstein, F; Wu, S X; Wynhoff, S; Xu, J; Xu, Z Z; Yang, B Z; Yang, C G; Yao, X Y; Ye, J B; Yeh, S C; You, J M; Zalite, A; Zalite, Yu; Zemp, P; Zeng, Y; Zhang, Z; Zhang, Z P; Zhou, B; Zhou, Y; Zhu, G Y; Zhu, R Y; Zichichi, Antonino; Ziegler, F

    1997-01-01

    Charged and neutral particle multiplicities of jets associated with identified semileptonic and hadronic b decays are studied. The observed differences between these jets are used to determine the inclusive properties of the weak charged hadronic current. The average charged particle multiplicity of the weak charged hadronic current in b decays is measured for the first time to be 2.69$\\pm$0.07(stat.)$\\pm$0.14(syst.). This result is in good agreement with the JETSET hadronization model of the weak charged hadronic current if 40$\\pm$17\\% of the produced mesons are light--flavored tensor (L=1) mesons. This level of tensor meson production is consistent with the measurement of the $\\pi^0$ multiplicity in the weak charged hadronic current in b decays. \\end{abstract}

  9. The Current Methods of Measurement of Market Orientation

    OpenAIRE

    Ing. Eva Tomaskova

    2009-01-01

    The article deals with the new trends in measurement of market orientation. Market orientation is one of the most investigated methods founded on marketing conception. Market orientation comes back in 90th of 20th century by workers Kohli and Jaworski and Narver and Slater. It is described as a method to contribute better managing of company by many researchers. These research studies involved definition of market orientation, impact market orientation on business performance, methods for mea...

  10. Radiographic measurements of hallux angles: a review of current techniques.

    Science.gov (United States)

    Srivastava, Subodh; Chockalingam, N; El Fakhri, Tarek

    2010-03-01

    Radiographic angles are commonly used in patients with hallux valgus deformity to assess the severity, plan surgery, assess outcome and compare results. Many different manual methods have been used, but are prone to error. More recently computer-assisted methods using software have become available. To review the different methods that have been used to measure radiographic angles in hallux valgus. A general literature search using relevant key words was undertaken using databases such as Medline, Embase, Cinahl and Cochrane Library. REVIEW FINDINGS AND DISCUSSION: The manual methods used are prone to errors. The reliability can be improved by using standardised radiographic technique and measurement technique using specific reference points. Computer-assisted methods using software, might improve reliability of measurements. Further studies are needed to assess if these methods are easy to use, and to compare different software's that are available. Specifically designed software for the foot might further improve the reliability of radiographic measurements in hallux valgus. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  11. A western boundary current eddy characterisation study

    Science.gov (United States)

    Ribbe, Joachim; Brieva, Daniel

    2016-12-01

    The analysis of an eddy census for the East Australian Current (EAC) region yielded a total of 497 individual short-lived (7-28 days) cyclonic and anticyclonic eddies for the period 1993 to 2015. This was an average of about 23 eddies per year. 41% of the tracked individual cyclonic and anticyclonic eddies were detected off southeast Queensland between about 25 °S and 29 °S. This is the region where the flow of the EAC intensifies forming a swift western boundary current that impinges near Fraser Island on the continental shelf. This zone was also identified as having a maximum in detected short-lived cyclonic eddies. A total of 94 (43%) individual cyclonic eddies or about 4-5 per year were tracked in this region. The census found that these potentially displaced entrained water by about 115 km with an average displacement speed of about 4 km per day. Cyclonic eddies were likely to contribute to establishing an on-shelf longshore northerly flow forming the western branch of the Fraser Island Gyre and possibly presented an important cross-shelf transport process in the life cycle of temperate fish species of the EAC domain. In-situ observations near western boundary currents previously documented the entrainment, off-shelf transport and export of near shore water, nutrients, sediments, fish larvae and the renewal of inner shelf water due to short-lived eddies. This study found that these cyclonic eddies potentially play an important off-shelf transport process off the central east Australian coast.

  12. Charged current disappearance measurements in the NuMI off-axis beam

    Energy Technology Data Exchange (ETDEWEB)

    R. H. Bernstein

    2003-09-25

    This article studies the potential of combining charged-current disappearance measurements of {nu}{sub {mu}} {yields} {nu}{sub {tau}} from MINOS and an off-axis beam. The author finds that the error on {Delta}m{sup 2} from a 100 kt-yr off-axis measurement is a few percent of itself. Further, the author found little improvement to an off-axis measurement by combining it with MINOS.

  13. Surface finish measurement studies

    Science.gov (United States)

    Teague, E. C.

    1983-01-01

    The performance of stylus instruments for measuring the topography of National Transonic Facility (NTF) model surfaces both for monitoring during fabrication and as an absolute measurement of topography was evaluated. It was found that the shop-grade instruments can damage the surface of models and that their use for monitoring fabrication procedures can lead to surface finishes that are substantially out of range in critical areas of the leading edges. The development of a prototype light-scattering instrument which would allow for rapid assessment of the surface finish of a model is also discussed.

  14. Measuring surface current velocities in the Agulhas region with ASAR

    CSIR Research Space (South Africa)

    Rouault, MJ

    2010-01-01

    Full Text Available velocities for oceanographic research in the Agulhas Current are assessed. Comparisons between radar, altimetry and surface drifters observations of the surface currents show that accurate wind fields are a strong pre-requisite to the derivation of meaningful...

  15. Experimental study of the dynamics of a thin current sheet

    Science.gov (United States)

    Gekelman, W.; DeHaas, T.; Van Compernolle, B.; Daughton, W.; Pribyl, P.; Vincena, S.; Hong, D.

    2016-05-01

    Many plasmas in natural settings or in laboratory experiments carry currents. In magnetized plasmas the currents can be narrow field-aligned filaments as small as the electron inertial length ≤ft(\\tfrac{c}{{ω }pe}\\right) in the transverse dimension or fill the entire plasma column. Currents can take the form of sheets, again with the transverse dimension the narrow one. Are laminar sheets of electric current in a magnetized plasma stable? This became an important issue in the 1960s when current-carrying plasmas became key in the quest for thermonuclear fusion. The subject is still under study today. The conditions necessary for the onset for tearing are known, the key issue is that of the final state. Is there a final state? One possibility is a collection of stable tubes of current. On the other hand, is the interaction between the current filaments which are the byproduct endless, or does it go on to become chaotic? The subject of three-dimensional current systems is intriguing, rich in a variety of phenomena on multiple scale sizes and frequencies, and relevant to fusion studies, solar physics, space plasmas and astrophysical phenomena. In this study a long (δz = 11 m) and narrow (δx = 1 cm, δy = 20 cm) current sheet is generated in a background magnetoplasma capable of supporting Alfvén waves. The current is observed to rapidly tear into a series of magnetic islands when viewed in a cross-sectional plane, but they are in essence three-dimensional flux ropes. At the onset of the current, magnetic field line reconnection is observed between the flux ropes. The sheet on the whole is kink-unstable, and after kinking exhibits large-scale, low-frequency (f ≪ f ci ) rotation about the background field with an amplitude that grows with distance from the source of the current. Three-dimensional data of the magnetic and electric fields is acquired throughout the duration of the experiment and the parallel resistivity is derived from it. The parallel

  16. A Loop Current experiment: Field and remote measurements

    Science.gov (United States)

    Hamilton, Peter; Lugo-Fernández, Alexis; Sheinbaum, Julio

    2016-12-01

    An overview of a new comprehensive observational study of the Loop Current (LC) in the eastern Gulf of Mexico that encompassed full-depth and near-bottom moorings, pressure-equipped inverted echo sounders (PIES) and remote sensing is presented. The study array was designed to encompass the LC from the Campeche Bank to the west Florida escarpment. This overview centers about principal findings as they pertain to mesoscale dynamics. Two companion papers provide in-depth analyses. Three LC anticyclonic eddy separation events were observed with good 3D spatial coverage over the 2½ year extent of the field study; the three separations exhibited similar processes after the LC had extended into the eastern Gulf. Large scale (∼300 km wavelength, 40-60 day periods) southward propagating meanders developed on the eastern side of the LC over deep (∼3000 m) water that were the result of baroclinic instability between the upper layer meandering jet and lower layer cyclones and anticyclones. The lower layer was only highly energetic during relatively short (∼2-3 months) intervals just prior to or during eddy detachments because of baroclinic instability. The steepening of the meanders lead to a pinch-off of LC eddies. The deep lower-layer eddies, constrained by the closed topography of the southeastern Gulf, propagated westward across the detachment zone and appear to assist in achieving separation. Small scale (∼50-100 km, periods ∼10 days) frontal eddies, observed on the western side of the LC along the Campeche Bank slope, decay over the deep water of the northern part of an extended LC, and have little influence on lower layer eddies, the east side meanders and the eddy detachment processes.

  17. Differential Thermostimulated Discharge Current Method for Studying Electrets

    Science.gov (United States)

    Mekishev, G. A.; Yovcheva, T. A.; Viraneva, A. P.; Gencheva, E. A.

    2010-01-01

    The thermostimulated discharge current method (TSDC) is widely used for the study of charge storage mechanisms in electrets. A new discharged technique, called differential, which consists in discharging a charged sample through an otherwise identical but uncharged one, has been proposed by J.-P. Reboul and A. Toureille. In the present paper a new version of the differential thermostimulated discharge current method is advanced. In contrast to the differential technique described earlier, the measuring cell allows to realize typical differential technique. In this case the measuring system records the difference of the thermostimulated currents of two samples which have been preliminary charged (or thermally treated) under the same or different conditions. Samples of 0.85 mm thick polymethylmethacrylate are used to demonstrate an operation of the developed differential TSDC method.

  18. Research on Measurement of Bed Shear Stress Under WaveCurrent Interaction

    Institute of Scientific and Technical Information of China (English)

    徐华; 夏云峰; 张世钊马炳和; 郝思禹; 杜德军

    2015-01-01

    The movement of sediment in estuary and on coast is directly restricted by the bed shear stress. Therefore, the research on the basic problem of sediment movement by the bed shear stress is an important way to research the theory of sediment movement. However, there is not a measuring and computing method to measure the bed shear stress under a complicated dynamic effect like wave and current. This paper describes the measurement and test research on the bed shear stress in a long launder of direct current by the new instrument named thermal shearometer based on micro-nanotechnology. As shown by the research results, the thermal shearometer has a high response frequency and strong stability. The measured results can reflect the basic change of the bed shear stress under wave and wave-current effect, and confirm that the method of measuring bed shear stress under wave-current effect with thermal shearometer is feasible. Meanwhile, a preliminary method to compute the shear stress compounded by wave-current is put forward according to the tested and measured results, and then a reference for further study on the basic theory of sediment movement under a complicated dynamic effect is provided.

  19. Recent Advances in Studies of Current Noise

    Science.gov (United States)

    Blanter, Yaroslav M.

    This is a brief review of recent activities in the field of current noise intended for newcomers. We first briefly discuss main properties of shot noise in nanostructures, and then turn to recent developments, concentrating on issues related to experimental progress: non-symmetrized cumulants and quantum noise; counting statistics; super-Poissonian noise; current noise and interferometry

  20. Four classification schemes of adult motivation: current views and measures.

    Science.gov (United States)

    Barbuto, John E

    2006-04-01

    Classification of perspectives on motivation and recommendations for measurement are provided. Motivation is classified into four broad categories: content theories, process theories, decision-making theories, and sustained-effort theories--drawing from different theories and measures. Recommendations on measurement are developed for each classification scheme of motivation.

  1. Current studies on myofascial pain syndrome.

    Science.gov (United States)

    Kuan, Ta-Shen

    2009-10-01

    Recent studies have clarified the nature of myofascial trigger points (MTrPs). In an MTrP region, multiple hyperirritable loci can be found. The sensory components of the MTrP locus are sensitized nociceptors that are responsible for pain, referred pain, and local twitch responses. The motor components are dysfunctional endplates that are responsible for taut band formation as a result of excessive acetylcholine (ACh) leakage. The concentrations of pain- and inflammation-related substances are increased in the MTrP region. It has been hypothesized that excessive ACh release, sarcomere shortening, and release of sensitizing substances are three essential features that relate to one another in a positive feedback cycle. This MTrP circuit is the connection among spinal sensory (dorsal horn) neurons responsible for the MTrP phenomena. Recent studies suggest that measurement of biochemicals associated with pain and inflammation in the MTrP region, the sonographic study of MTrPs, and the magnetic resonance elastography for taut band image are potential tools for the diagnosis of MTrPs. Many methods have been used to treat myofascial pain, including laser therapy, shockwave therapy, and botulinum toxin type A injection.

  2. Design and Measurement Methodology for a Sub-picoampere Current Digitiser

    CERN Document Server

    Voulgari, Evgenia; Anghinolfi, Francis; Krummenacher, François; Kayal, Maher

    2015-01-01

    This paper introduces some design and measurement techniques that were used in the design and the testing of an ASIC for ultra-low current sensing. The idea behind this paper is to present the limitations in sub-picoampere current measurements and demonstrate an ASIC that can accurately measure the different sources of leakage currents and the methodology of measuring. Then the leakage current can be subtracted or compensated in order to accurately measure the ultra-low current that is generated from a sensor/detector. The proposed ASIC can measure currents as low as -50 fA, a value well below similar ASIC implementations.

  3. Giant streaming currents measured in a gold sputtered glass microchannel array

    Science.gov (United States)

    Mansouri, Abraham; Kostiuk, Larry W.

    2016-02-01

    Pressure-driven-flow of a dilute aqueous solution in a microchannel with charged walls generates streaming currents (ionic current) and streaming potentials across the microchannel. While generation of streaming currents can be performed in network of parallel circular microchannels or unstructured porous media, accurate measurements of such currents remain a challenge. In this study a gigantic amount of streaming current was successfully generated and measured using a glass microchannel array with special gold sputtered coatings on both its ends. Streaming current as high as 0.7 mA was obtained with moderate pressure drop (124 kPa) across the glass microchannel array that consists of approximately 11 250 000 parallel microchannels with radii of 2.5 μm. Higher streaming currents are also possible to generate (scaled to 142 μA/cm2 of frontal area at a flow rate of 12 cm3/s) with potential applications in surface charge characterizations and electrokinetic power generation. In addition, apparent ζ potential of glass microchannel array surface was estimated with the aid of streaming current data and Levine-Olivare theories and an apparent ζ potential of -65 mV (0 M KCl, κa = 8) is reported.

  4. The current interruption process in vacuum analysis of the currents and voltages of current-zero measurements

    NARCIS (Netherlands)

    van Lanen, E.P.A.

    2008-01-01

    The circuit breaker helps protecting vulnerable equipment in a power network from hazardous short-circuit currents by isolating a fault, when it occurs. They perform this task by extinguishing a plasma arc that appears as soon as the breaker's contacts separate, and through which the short-circuit c

  5. The current interruption process in vacuum analysis of the currents and voltages of current-zero measurements

    NARCIS (Netherlands)

    van Lanen, E.P.A.

    2008-01-01

    The circuit breaker helps protecting vulnerable equipment in a power network from hazardous short-circuit currents by isolating a fault, when it occurs. They perform this task by extinguishing a plasma arc that appears as soon as the breaker's contacts separate, and through which the short-circuit

  6. Inversion of thicknesses of multi-layered structures from eddy current testing measurements

    Institute of Scientific and Technical Information of China (English)

    黄平捷; 吴昭同

    2004-01-01

    Luquire et al. ' s impedance change model of a rectangular cross section probe coil above a structure with an arbitrary number of parallel layers was used to study the principle of measuring thicknesses of multi-layered structures in terms of eddy current testing voltage measurements. An experimental system for multi-layered thickness measurement was developed and several fitting models to formulate the relationships between detected impedance/voltage measurements and thickness are put forward using least square method. The determination of multi-layered thicknesses was investigated after inversing the voltage outputs of the detecting system. The best fitting and inversion models are presented.

  7. Inversion of thicknesses of multi-layered structures from eddy current testing measurements

    Institute of Scientific and Technical Information of China (English)

    HUANG Ping-jie(黄平捷); WU Zhao-tong(吴昭同)

    2004-01-01

    Luquire et al.'s impedance change model of a rectangular cross section probe coil above a structure with an arbitrary number of parallel layers was used to study the principle of measuring thicknesses of multi-layered structures in terms of eddy current testing voltage measurements. An experimental system for multi-layered thickness measurement was developed and several fitting models to formulate the relationships between detected impedance/voltage measurements and thickness are put forward using least square method. The determination of multi-layered thicknesses was investigated after inversing the voltage outputs of the detecting system. The best fitting and inversion models are presented.

  8. MEASUREMENT OF ANODIC OVERVOLTAGE BY A MODIFIED CURRENT INTERRUPTION METHOD IN CRYOLITE-ALUMINA MELTS

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Generally, there are reasons to believe that the experimental technique has been inadequate in some works on anodic overvoltage measurements in aluminium electrolysis, therefore, the overvoltage data are not quite correct. Several causes affecting the precision of measurements were analyzed, a cell configuration ( vertical carbon anodes, insulated bottom and inner wall of graphite crucible as cathode) was used for overvoltage studies. An improved current interruption technique was used with current interrupted in less than 2μs and a simulation was applied to the oscillating potential decay curve.

  9. Surgical site infections in dermatologic surgery: etiology, pathogenesis, and current preventative measures.

    Science.gov (United States)

    Saleh, Karim; Schmidtchen, Artur

    2015-05-01

    Surgical site infections (SSIs) after dermatologic surgery continue to represent undesirable complications that affect patients in several aspects. The etiology and pathogenesis of SSIs are not completely understood, and as a result, current preventative measures are debatable. To review and summarize the current available literature specific to SSIs in dermatologic surgery. The pathogenesis of SSIs, factors contributing to SSIs, current preventative guidelines, and evidence supporting their use are explored. A review of the medical literature. Most measures used to prevent SSIs in dermatologic surgery are based on studies of wounds in general surgery. Evidence specific to dermatologic surgery is scarce. More research related to the pathogenesis of SSIs is needed to establish effective preventative measures that are key to reducing incidences of SSIs.

  10. Current Consumption Measurements with a Carrier Aggregation Smartphone

    DEFF Research Database (Denmark)

    Sanchez-Mejias, Rafael; Guo, Yu; Lauridsen, Mads

    2014-01-01

    Carrier Aggregation (CA) is introduced in LTE release 10 to improve data rates by allowing the User Equipment (UE) to receive data on more than one LTE carrier. The related increased complexity is expected to affect the UE current consumption, but yet no empirical evaluation has been published on...

  11. Current Status of Japanese Global Precipitation Measurement (GPM) Research Project

    Science.gov (United States)

    Kachi, Misako; Oki, Riko; Kubota, Takuji; Masaki, Takeshi; Kida, Satoshi; Iguchi, Toshio; Nakamura, Kenji; Takayabu, Yukari N.

    2013-04-01

    The Global Precipitation Measurement (GPM) mission is a mission led by the Japan Aerospace Exploration Agency (JAXA) and the National Aeronautics and Space Administration (NASA) under collaboration with many international partners, who will provide constellation of satellites carrying microwave radiometer instruments. The GPM Core Observatory, which carries the Dual-frequency Precipitation Radar (DPR) developed by JAXA and the National Institute of Information and Communications Technology (NICT), and the GPM Microwave Imager (GMI) developed by NASA. The GPM Core Observatory is scheduled to be launched in early 2014. JAXA also provides the Global Change Observation Mission (GCOM) 1st - Water (GCOM-W1) named "SHIZUKU," as one of constellation satellites. The SHIZUKU satellite was launched in 18 May, 2012 from JAXA's Tanegashima Space Center, and public data release of the Advanced Microwave Scanning Radiometer 2 (AMSR2) on board the SHIZUKU satellite was planned that Level 1 products in January 2013, and Level 2 products including precipitation in May 2013. The Japanese GPM research project conducts scientific activities on algorithm development, ground validation, application research including production of research products. In addition, we promote collaboration studies in Japan and Asian countries, and public relations activities to extend potential users of satellite precipitation products. In pre-launch phase, most of our activities are focused on the algorithm development and the ground validation related to the algorithm development. As the GPM standard products, JAXA develops the DPR Level 1 algorithm, and the NASA-JAXA Joint Algorithm Team develops the DPR Level 2 and the DPR-GMI combined Level2 algorithms. JAXA also develops the Global Rainfall Map product as national product to distribute hourly and 0.1-degree horizontal resolution rainfall map. All standard algorithms including Japan-US joint algorithm will be reviewed by the Japan-US Joint

  12. Surfzone currents at Candolim and Miramar beaches of Goa, India: measurements and comparisons

    Digital Repository Service at National Institute of Oceanography (India)

    Yadhunath, E.M.; JayaKumar, S.; Jishad, M.; Gowthaman, R.; Rajasekaran, C.; Pednekar, P.S.

    Measurements in the surfzone current are often carried out using Acoustic Doppler Velocimeters, Electromagnetic current meters, as well as visual observations based on floats A simple approach is used to install an Aanderaa current meter in water...

  13. Measuring child exposure to violence and mental health reactions in epidemiological studies: challenges and current issues Criança, violência e saúde: desafios e questões atuais

    Directory of Open Access Journals (Sweden)

    Cristiane Seixas Duarte

    2009-04-01

    Full Text Available This paper examines challenges and current issues involved in measuring exposure to different types of violence which are associated mental health problems in children and adolescents. Standardized measures suitable for epidemiological studies, selected based on their relevance in the current literature, are briefly described and commented. The assessment of child's exposure to violence may focus on a specific event (e.g., kidnapping, a specific context (e.g., war or even of a certain type of exposure (e.g., intrafamilial physical violence. The assessment of child mental health after exposure to violence has traditionally focused on posttraumatic stress disorder (PTSD - most frequently measured through non-diagnostic scales. However, other mental health reactions may be present and screening as well as diagnostic instruments which may be used to assess these reactions are also described. Two issues of emerging importance - the assessment of impairment and of traumatic grief in children - are also presented. Availability of culturally appropriate instruments is a crucial step towards proper identification of child mental health problems after exposure to violence.Este artigo examina os desafios e perspectivas atuais envolvidos na mensuração da exposição a diferentes tipos de violência e problemas de saúde mental em crianças e adolescentes. Instrumentos padronizados apropriados para estudos epidemiológicos, selecionados com base em sua relevância na literatura, são brevemente descritos e comentados. A avaliação de exposição à violência em crianças pode dizer respeito a um evento específico (como sequestro ou um contexto específico (como guerra ou mesmo um determinado tipo de exposição (como violência física intrafamiliar. A avaliação da saúde mental infantil após a exposição à violência tradicionalmente concentrou-se na avaliação do transtorno de estresse pós-traumático (TEPT - freqüentemente avaliado atrav

  14. 'Leak Current' correction for critical current measurement of no-insulation HTS coil

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jung Bin [Laboratoire National des Champs Magnétiques Intenses, CNRS, Grenoble (France); Hahn, Seung Yong [Dept. of Electrical and Computer Engineering, Seoul National University, Seoul (Korea, Republic of)

    2017-06-15

    Discrepancy between a power supply current and an actual “spiral” coil current makes the conventional 4-probe measurement of a critical current (I{sub c}) of a no-insulation (NI) high temperature superconductor (HTS) coil inaccurate and time-consuming. This paper presents a fast and accurate approach for I{sub c} measurement of NI HTS coils. With an NI HTS coil energized at a constant ramping rate, a complete analytic expression for the spiral coil current was obtained from a first-order partial differential equation that derived from an equivalent circuit model of the NI coil. From the analytic solution, both spiral coil current and radial leak current can be obtained simultaneously, which enables fast and accurate measurement of the NI coil I{sub c}. To verify the proposed approach, an NI double-pancake (DP) coil, wound with GdBCO tapes of 6 mm × 0.1 mm, was constructed and its Ic was repeatedly measured with various ramping rates in a bath of liquid nitrogen at 77 K. The measured results agreed well with the calculated ones, which validates the proposed approach to measure I{sub c} of an NI HTS coil.

  15. TID-dependent current measurements of IBL readout chips

    Energy Technology Data Exchange (ETDEWEB)

    Dette, Karola [TU Dortmund, Experimentelle Physik IV (Germany); CERN (Switzerland); Collaboration: ATLAS Pixel-Collaboration

    2016-07-01

    The ATLAS detector consists of several subsystems with a hybrid pixel detector as the innermost component of the tracking system. The pixel detector has been composed of three layers of silicon sensor assemblies during the first data taking run of the LHC and has been upgraded with a new 4th layer, the so-called Insertable B-Layer (IBL), in summer 2014. Each silicon sensor of the IBL is connected to a Front End readout chip (FE-I4) via bump bonds. During the first year of data taking an increase of the LV current produced by the readout chips was observed. This increase could be traced back to radiation damage inside the silicon. The dependence of the current on the Total Ionizing Dose (TID) and temperature has been tested with X-ray irradiations and will be presented in this talk.

  16. The Current Canon in British Romantics Studies.

    Science.gov (United States)

    Linkin, Harriet Kramer

    1991-01-01

    Describes and reports on a survey of 164 U.S. universities to ascertain what is taught as the current canon of British Romantic literature. Asserts that the canon may now include Mary Shelley with the former standard six major male Romantic poets, indicating a significant emergence of a feminist perspective on British Romanticism in the classroom.…

  17. Measurement of local current density of all-vanadium redox flow batteries

    Science.gov (United States)

    Hsieh, Wen-Yen; Leu, Chih-Hsing; Wu, Chun-Hsing; Chen, Yong-Song

    2014-12-01

    This article presents a preliminary study of the measurement of local current density in all-vanadium redox flow batteries. Two batteries are designed and manufactured in this study, and the experimental results are compared. In the first cell, the current collector is divided into 25 segments, and the flow field plate is not segmented, whereas in the other cell, the flow field plate is segmented. The effects of the electrolyte flow rate on the battery efficiencies and the local current density variation are investigated. The experimental results show that the current density near the outlet significantly decreases when the discharge capacity approaches zero. In addition, the battery has a larger discharge depth at a higher electrolyte flow rate.

  18. Wave-current interactions in deep water conditions: field measurements and analyses

    Science.gov (United States)

    Rougier, Gilles; Rey, Vincent; Molcard, Anne

    2015-04-01

    The study of wave - current interaction has drawn interest in oceanography, ocean engineering, maritime navigation and for tides or waves power device design. In the context of the hydrodynamics study along the French Mediterranean coast, a current profiler was deployed near Toulon at the south of the "Port Cros" island. This coastal zone is characterized by a steep slope, the water depth varying from tens meters to several thousand meters over few kilometers from the coast. An ambient current, the "Northern Current", coming from the Ligurian sea (area of Genoa, Italy) and following the coast up to Toulon, is present all over the year. Its mean surface velocity is of about 0.30 m/s, its flow rate of about 1.5 Sv. The region is exposed to two dominating winds: the Mistral, coming from North-West, and Eastern winds. Both generate swell and/or wind waves in either following or opposing current conditions with respect to the Northern Current. A current profiler equipped with a wave tracking system (ACPD workhorse from RDI) was deployed from July to October 2014 in deep water conditions (depth of about 500m). The mooring system allowed the ADCP to measure the current profile from the sea surface down to 25m depth, which corresponds more or less to the depth of influence of waves of periods up to 10s. The collected data include energetic wave conditions in either following or opposing current conditions. The current intensity and its vertical profiles have shown a significant temporal variability according to the meteorological conditions. Effects of the wave conditions on the current properties are discussed. ACKNOWLEDGEMENTS This work was supported by the program BOMBYX and the ANR grant No ANR-13-ASTR-0007.

  19. Site Selection of Ocean Current Power Generation from Drifter Measurements

    Science.gov (United States)

    2014-12-01

    Peter C. Chu2, Ruo-Shan Tseng3 4 5 1 Department of Marine Biotechnology and Resources, National Sun Yat-sen University, 6 Kaohsiung 80424, Taiwan...Besides 105 Kuroshio, there is a strong current with a velocity of 1.2 m s-1 in the South China Sea 106 along the coast of Vietnam. Fig. 4 shows the...more 128 than 500 m is also being developed for Kuroshio power plant near Taitung [9]. The sea 129 depth near Taitung is often more than 500 m. Thus

  20. Design and Performance of a Novel Pancake Rogowski Coil for Measuring Pulse Currents%Design and Performance of a Novel Pancake Rogowski Coil for Measuring Pulse Currents

    Institute of Scientific and Technical Information of China (English)

    王春杰; 汲胜昌; 聂济宇; 欧小波; 韩钟健; 张乔根

    2011-01-01

    A novel pancake Rogowski coil without magnetic core is introduced in this paper. Owing to its special pancake winding structure, the coil is of low self-resistance and high self-inductance, and thus has excellent low frequency characteristic in the self-integral mode. Moreover, because of its unique installation method, the coil has a flexible sensitivity and can be applied under situations where toroidal air-core Rogowski coils or printed aircuit board (PCB) coils are not available. The parameters and performance of the pancake Rogowski coil are presented, and the principle of shielding is given. Measurements of step pulse current and oscillating pulse current by the coil are studied experimentally to illustrate its good linearity, reliable and flexible sensitivity and excellent frequency characteristic, especially its advantage in low frequency characteristic. The pancake Rogowski coil can be designed to assume round, square or rectangle shape, and has thus broad prospects in its application to the current measurement in such areas as plasma physics and pulsed power technology.

  1. The Applications of Current Comparators in the Measurements on High Voltage Insulation

    Directory of Open Access Journals (Sweden)

    Fei Yi-jun

    2016-01-01

    Full Text Available This paper describes the basic structure of the current comparator used for high voltage insulation measurements. Further applications for the current comparator in high voltage insulation are investigated and developed. A measuring system for the measurement of harmonics in the loss current of water tree aged insulation is described, as well as the principles to measure partial discharges with the current comparator bridge. A new system for the measurement of the DC component in the leakage current of insulation is de1veloped and presented. The results of experiments on XLPE cable insulation are also given.

  2. Experimental Study on Current Decay Characteristics of Persistent Current HTS Magnet by Alternating Magnetic Field

    Science.gov (United States)

    Park, Young Gun; Lee, Chang Young; Hwang, Young Jin; Lee, Woo Seung; Lee, Jiho; Jo, Hyun Chul; Chung, Yoon Do; Ko, Tae Kuk

    This paper deals with a current decay characteristics of a high temperature superconducting (HTS) magnet operated in persistent current mode (PCM). In superconducting synchronous machine applications such as linear synchronous motor (LSM), the superconducting coil is designed to operate in the PCM to obtain steady magnetic field with DC transport current. This superconducting magnet operates on a direct current, but it can be exposed to alternating magnetic field due to the armature winding. When the magnet is subjected to an external time-varying magnetic field, it is possible to result in a decay of the current in PCM system due to AC loss. In this research, a PCM system with armature coil which generates time-varying magnetic field was fabricated to verify current decay characteristics by external alternating magnetic field. The current decay rate was measured by using a hall sensor as functions of amplitude and frequency of armature coil.

  3. Current international intercomparison measurement on radon and its progeny

    Energy Technology Data Exchange (ETDEWEB)

    Yamasaki, Keizo [Kyoto Univ., Kumatori, Osaka (Japan). Research Reactor Inst.

    1996-12-01

    The international intercomparison measurement on radon and its progeny was held between the EML of USDOE and several Japanese organisations, using the radon test chamber installed in EML. Japanese results of radon concentration by the active method using the ionization chamber or scintillation cell and the passive method using the solid track detector were about 5% small compared to that of EML. On the results of radon progeny, there were not any large systematic differences between EML and Japanese participants in spite of wide range of deviation except for the results at the condition of low aerosol density. (author)

  4. A precision analogue integrator system for heavy current measurement in MFDC resistance spot welding

    Science.gov (United States)

    Xia, Yu-Jun; Zhang, Zhong-Dian; Xia, Zhen-Xin; Zhu, Shi-Liang; Zhang, Rui

    2016-02-01

    In order to control and monitor the quality of middle frequency direct current (MFDC) resistance spot welding (RSW), precision measurement of the welding current up to 100 kA is required, for which Rogowski coils are the only viable current transducers at present. Thus, a highly accurate analogue integrator is the key to restoring the converted signals collected from the Rogowski coils. Previous studies emphasised that the integration drift is a major factor that influences the performance of analogue integrators, but capacitive leakage error also has a significant impact on the result, especially in long-time pulse integration. In this article, new methods of measuring and compensating capacitive leakage error are proposed to fabricate a precision analogue integrator system for MFDC RSW. A voltage holding test is carried out to measure the integration error caused by capacitive leakage, and an original integrator with a feedback adder is designed to compensate capacitive leakage error in real time. The experimental results and statistical analysis show that the new analogue integrator system could constrain both drift and capacitive leakage error, of which the effect is robust to different voltage levels of output signals. The total integration error is limited within  ±0.09 mV s-1 0.005% s-1 or full scale at a 95% confidence level, which makes it possible to achieve the precision measurement of the welding current of MFDC RSW with Rogowski coils of 0.1% accuracy class.

  5. Smart Technique for Induction Motors Diagnosis by Monitoring the Power Factor Using Only the Measured Current

    Science.gov (United States)

    Shnibha, R. A.; Albarabar, A. S.

    2012-05-01

    This paper is concerned with accurate, early and reliable induction motor IM fault detection and diagnosis using an enhanced power parameter measurement technique. IM protection devices typically monitor the motor current and/or voltage to provide the motor protection from e.g. current overload, over/under voltage, etc. One of the interesting parameters to monitor is the operating power factor (PF) of the IM which provides better under-load protection compared to the motor current based approaches. The PF of the motor is determined by the level of the current and voltage that are drawn, and offers non-intrusive monitoring. Traditionally, PF estimation would require both voltage and the current measurements to apply the displacement method. This paper will use a method of determining the operating PF of the IM using only the measured current and the manufacturer data that are typically available from the nameplate and/or datasheet for IM monitoring. The novelty of this work lies in detecting very low phase imbalance related faults and misalignment. Much of the previous work has dealt with detecting phase imbalance faults at higher degrees of severity, i.e. voltage drops of 10% or more. The technique was tested by empirical measurements on test rig comprised a 1.1 kW variable speed three phase induction motor with varying output load (No load, 25%, 50%, 75% and 100% load). One common faults was introduced; imbalance in one phase as the electrical fault The experimental results demonstrate that the PF can be successfully applied for IM fault diagnosis and the present study shows that severity fault detection using PF is promising. The proposed method offers a potentially reliable, non-intrusive, and inexpensive CM tool which can be implemented with real-time monitoring systems

  6. Comparing current definitions of return to work: A measurement approach

    NARCIS (Netherlands)

    Steenstra, I.A.; Lee, H.; Vroome, E.M.M. de; Busse, J.W.; Hogg-Johnson, S.J.

    2012-01-01

    Introduction Return-to-work (RTW) status is an often used outcome in work and health research. In low back pain, work is regarded as a normal activity a worker should return to in order to fully recover. Comparing outcomes across studies and even jurisdictions using different definitions of RTW can

  7. Comparing current definitions of return to work: A measurement approach

    NARCIS (Netherlands)

    Steenstra, I.A.; Lee, H.; Vroome, E.M.M. de; Busse, J.W.; Hogg-Johnson, S.J.

    2012-01-01

    Introduction Return-to-work (RTW) status is an often used outcome in work and health research. In low back pain, work is regarded as a normal activity a worker should return to in order to fully recover. Comparing outcomes across studies and even jurisdictions using different definitions of RTW can

  8. Study of toroidal current penetration during current ramp in JIPP T-IIU with fast response Zeeman polarimeter

    Energy Technology Data Exchange (ETDEWEB)

    Kuramoto, H.; Hiraki, N. [Kyushu Inst. of Tech., Kitakyushu, Fukuoka (Japan); Toi, K. [and others

    1997-01-01

    The toroidal current penetration is studied in current ramp experiments of the JIPP T-IIU tokamak. The poloidal magnetic field profile in the peripheral region of a plasma (0.5 {<=} {rho} {<=} 1.0) has been measured directly with a newly developed fast response Zeeman polarimeter. The experimental results indicate that an obvious skin effect of toroidal current density is clearly observed during both the current ramp-up and ramp-down experiments. The experimentally obtained toroidal current density profiles are well described by the profiles calculated on the assumption of the neoclassical electrical conductivity. Quasi-linear {Delta}`-analysis of tearing modes for the measured current density profile is consistent with time behaviour of coherent MHD modes such as m=4/n=1 or m=3/n=1 (m: poloidal mode number, n: toroidal mode number) often observed during the current ramp-up phase. The effect of these MHD modes on current penetration during the current ramp-up discharges is studied. (author)

  9. Current Conceptual Challenges in the Study of Rhythm Processing Deficits

    Directory of Open Access Journals (Sweden)

    Pauline eTranchant

    2015-06-01

    Full Text Available Interest in the study of rhythm processing deficits (RPD is currently growing in the cognitive neuroscience community, as this type of investigation constitutes a powerful tool for the understanding of normal rhythm processing. Because this field is in its infancy, it still lacks a common conceptual vocabulary to facilitate effective communication between different researchers and research groups. In this commentary, we provide a brief review of recent reports of RPD through the lens of one important empirical issue: the method by which beat perception is measured, and the consequences of method selection for the researcher’s ability to specify which mechanisms are impaired in RPD. This critical reading advocates for the importance of matching measurement tools to the putative neurocognitive mechanisms under study, and reveals the need for effective and specific assessments of the different aspects of rhythm perception and synchronization.

  10. Current Research on Chinese Students Studying Abroad

    Science.gov (United States)

    Henze, Jurgen; Zhu, Jiani

    2012-01-01

    As a result of China's growing participation and importance in the process of internationalization and globalization a continuously rising number of Chinese students has gone abroad for further study. By the end of the last decade the number of Chinese students abroad made up the largest group of international students in the USA (surpassing those…

  11. Current Research on Chinese Students Studying Abroad

    Science.gov (United States)

    Henze, Jurgen; Zhu, Jiani

    2012-01-01

    As a result of China's growing participation and importance in the process of internationalization and globalization a continuously rising number of Chinese students has gone abroad for further study. By the end of the last decade the number of Chinese students abroad made up the largest group of international students in the USA (surpassing those…

  12. Study on no-load closing inrush current of transformer group and suppression measures%多台变压器空载合闸励磁涌流及其抑制方案的研究

    Institute of Scientific and Technical Information of China (English)

    傅伟; 赵莉华; 梁勇; 何祥龙; 牛中伟

    2015-01-01

    Taking no-load closing inrush current theory of a single transformer as a foundation, combined with the transformer of the situation in practice, this paper further studies transformer group inrush current. Based on transformer group no-load closing characteristics, it proposes to increase the system impedance and capacitors. Through contrasting the flux changes between the transformer before/after increasing system impedance, it analyzes its impact on the inrush current and describes a method to select the best impedance values. Finally, no-load closing inrush current of transformer group simutaneously switch-on is simulated by using Matlab, and its value is compared with inrush current value of the shcheme of installing single resistor and the scheme of both installing resistor and capacitor. Simulation results show that this suppression scheme effectively suppresses the transformer group inrush current.%以单台变压器合闸励磁涌流原理为基础,结合变压器在实际操作中的情况,进一步研究多台变压器的合闸涌流。根据多台变压器空载合闸的特点提出了增加系统阻抗和串联电容器的方法。通过对比增加系统阻抗后变压器之间磁链变化分析了其对励磁涌流的影响并介绍了选择最佳阻抗值的方法。最后结合仿真软件 Matlab仿真了多台变压器同时合闸的励磁涌流并与加载单一电阻方案和电阻加电容器方案的励磁涌流大小进行对比。仿真结果表明,这种抑制方案有效地抑制了多台变压器的励磁涌流。

  13. Reliability of quantitative EEG (qEEG) measures and LORETA current source density at 30 days.

    Science.gov (United States)

    Cannon, Rex L; Baldwin, Debora R; Shaw, Tiffany L; Diloreto, Dominic J; Phillips, Sherman M; Scruggs, Annie M; Riehl, Timothy C

    2012-06-14

    There is a growing interest for using quantitative EEG and LORETA current source density in clinical and research settings. Importantly, if these indices are to be employed in clinical settings then the reliability of these measures is of great concern. Neuroguide (Applied Neurosciences) is sophisticated software developed for the analyses of power, and connectivity measures of the EEG as well as LORETA current source density. To date there are relatively few data evaluating topographical EEG reliability contrasts for all 19 channels and no studies have evaluated reliability for LORETA calculations. We obtained 4 min eyes-closed and eyes-opened EEG recordings at 30-day intervals. The EEG was analyzed in Neuroguide and FFT power, coherence and phase was computed for traditional frequency bands (delta, theta, alpha and beta) and LORETA current source density was calculated in 1 Hz increments and summed for total power in eight regions of interest (ROI). In order to obtain a robust measure of reliability we utilized a random effects model with an absolute agreement definition. The results show very good reproducibility for total absolute power and coherence. Phase shows lower reliability coefficients. LORETA current source density shows very good reliability with an average 0.81 for ECB and 0.82 for EOB. Similarly, the eight regions of interest show good to very good agreement across time. Implications for future directions and use of qEEG and LORETA in clinical populations are discussed.

  14. Oceanography of Wadge bank - current measurements over a tidal cycle off the south coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    RamaRaju, V.S.; RameshBabu, V.; Anto, A.F.

    Direct current measurements made during the onset and termination of SW monsoon indicate wide fluctuations in space and time. The nearshore current decreases in magnitude from the onset to the termination of the monsoon. The resultant surface...

  15. Highly Sensitive Measurements of the Dark Current of Superconducting Cavities for TESLA Using a SQUID Based Cryogenic Current Comparator

    CERN Document Server

    Vodel, W; Nietzsche, S

    2004-01-01

    This contribution presents a Cryogenic Current Comparator (CCC) as an excellent tool for detecting dark currents generated, e.g. by superconducting cavities for the upcoming TESLA project (X-FEL) at DESY. To achieve the maximum possible energy the gradient of the superconducting RF cavities should be pushed close to the physical limit of 50 MV/m. The undesired field emission of electrons (so-called dark current) of the superconducting RF cavities at strong fields may limit the maximum gradient. The absolute measurement of the dark current in correlation with the gradient will give a proper value to compare and classify the cavities. The main component of the CCC is a highly sensitive LTS-DC SQUID system which is able to measure extremely low magnetic fields, e.g. caused by the dark current. For this reason the input coil of the SQUID is connected across a special designed toroidal niobium pick-up coil for the passing electron beam. A noise limited current resolution of nearly 2 pA/√(Hz) with a measu...

  16. Tobin Tax: Arguments and Current Derivative Studies

    Directory of Open Access Journals (Sweden)

    Ozekicioglu Seda

    2015-04-01

    Full Text Available Tobin Tax and its derivative applications have started to be discussed again in many platforms as the issue regarding taxation of short-term capital movements has become an agenda among international communities such as European Union (EU and G20 since the beginning of 2000s. In this study, Tobin Tax, which is the first significant step towards taxation of foreign currency transactions, has been discussed theoretically and considering its possible effects on application. Also, in this context, the initiatives of countries such as USA, Belgium, France and Austria regarding international implementation of Tobin Tax and its derivatives are being evaluated. The intended use of the taxes, determination of transactions exempt from tax and international cooperation in the implementation of taxation are possible problems that can be faced regarding Tobin Tax. In this study the conclusion, which the effects of Tobin Tax in developing and developed countries will be different but imposing such tax regarding cyclic balance of the world economy will be a positive improvement, has been reached.

  17. Ocular biomechanics study: current state and perspectives

    Directory of Open Access Journals (Sweden)

    S. Yu. Petrov

    2015-03-01

    Full Text Available Despite the fact that the eye represents a challenge for biomechanical research due to its size, over the last two decades, much data on ocular biomechanics were accumulated. Scleral and lamina cribrosa biomechanics contribute to our understanding of myopia and open-angle glaucoma; iris and trabecular meshwork biomechanics to that of angle-closure glaucoma; vitreous biomechanics to that of retinal detachment and ocular drug delivery; corneal biomechanics to that of keratoconus; and lens capsule biomechanics to that of cataract. This paper offers a general overview of recent advances in corneal, scleral, crystalline lens, and lamina cribrosa biomechanics and summarizes the results of experimental and clinical studies. Ocular biomechanics abnormalities affect etiology of many eye diseases. Ocular biomechanics plays an important role in the development of novel diagnostic methods, therapeutic and surgical procedures. Corneal biomechanics impacts etiology and pathogenesis of keratoconus as well as tonometry accuracy and explains corneal refractive surgery effect. Scleral biomechanics is associated with IOP and progressive myopia. Accommodative apparatus (ciliary body and crystalline lens is an important anatomic physiological structure. Recent studies uncovered the causes of agerelated loss of accommodation as a result of lens involution. Optic nerve head abnormalities due to IOP fluctuations are the key factor of glaucomatous neuropathy. They are directly associated with ocular biomechanics as well.

  18. Ocular biomechanics study: current state and perspectives

    Directory of Open Access Journals (Sweden)

    S. Yu. Petrov

    2015-01-01

    Full Text Available Despite the fact that the eye represents a challenge for biomechanical research due to its size, over the last two decades, much data on ocular biomechanics were accumulated. Scleral and lamina cribrosa biomechanics contribute to our understanding of myopia and open-angle glaucoma; iris and trabecular meshwork biomechanics to that of angle-closure glaucoma; vitreous biomechanics to that of retinal detachment and ocular drug delivery; corneal biomechanics to that of keratoconus; and lens capsule biomechanics to that of cataract. This paper offers a general overview of recent advances in corneal, scleral, crystalline lens, and lamina cribrosa biomechanics and summarizes the results of experimental and clinical studies. Ocular biomechanics abnormalities affect etiology of many eye diseases. Ocular biomechanics plays an important role in the development of novel diagnostic methods, therapeutic and surgical procedures. Corneal biomechanics impacts etiology and pathogenesis of keratoconus as well as tonometry accuracy and explains corneal refractive surgery effect. Scleral biomechanics is associated with IOP and progressive myopia. Accommodative apparatus (ciliary body and crystalline lens is an important anatomic physiological structure. Recent studies uncovered the causes of agerelated loss of accommodation as a result of lens involution. Optic nerve head abnormalities due to IOP fluctuations are the key factor of glaucomatous neuropathy. They are directly associated with ocular biomechanics as well.

  19. Characteristics of inertial oscillations according to the experimental measurements of currents on the Russian shelf of the Black Sea

    Science.gov (United States)

    Bondur, V. G.; Sabinin, K. D.; Grebenyuk, Yu. V.

    2017-01-01

    The analysis of inertial oscillations on the Gelendzhik shelf of the Black Sea is presented. Spectral characteristics of the current fields are studied based on the measurements taken by the acoustic Doppler current profiler. Strong variability of the inertial oscillation hodographs at variations in the background shear current and diverse forms of inertial oscillations measured at a fixed point at various values of the shear current are revealed. The relation between the passage of the multidirectional jets and the trains of inertial oscillations inside the jets in the studied region are established.

  20. Research on Precision Assembly Robot's Joint Torque Control Based on Current Measurement

    Institute of Scientific and Technical Information of China (English)

    董高云; 许春山; 费燕琼; 赵锡芳

    2003-01-01

    A set of new current sensing device is used to realize joint torque control based on current measurement in a precision assembly robot's third joint. The output torque's model of the joint's brnshless DC motor is founded. Disturbance factors and the compensated effect of the torque's closed loop based on current measurement are analyzed. Related simulations and experiments show that the system has good current tracking and anti-disturbances performance, which improve the force control performance of the robot in assembly.

  1. Weak measurement from the electron displacement current: new path for applications

    Science.gov (United States)

    Marian, D.; Colomés, E.; Zanghì, N.; Oriols, X.

    2015-10-01

    The interest on weak measurements is rapidly growing during the last years as a unique tool to better understand and predict new quantum phenomena. Up to now many theoretical and experimental weak-measurement techniques deal with (relativistic) photons or cold atoms, but there is much less investigation on (non-relativistic) electrons in up-to-date electronics technologies. We propose a way to perform weak measurements in nanoelectronic devices through the measurement of the total current (particle plus displacement component) in such devices. We study the interaction between an electron in the active region of a electron device with a metal surface working as a sensing electrode by means of the (Bohmian) conditional wave function. We perform numerical (Monte Carlo) simulations to reconstruct the Bohmian trajectories in the iconic double slit experiment. This work opens new paths for understanding the quantum properties of an electronic system as well as for exploring new quantum engineering applications in solid state physics.

  2. Study of wavelet transform type high-current transformer

    Institute of Scientific and Technical Information of China (English)

    卢文科; 朱长纯; 刘君华; 张建军

    2002-01-01

    The wavelet transformation is applied to the high-current transformer.The high-current transformer elaborated in the paper is mainly applied to the measurement of AC/DC high-current.The principle of the transformer is the Hall direct-measurement principle.The transformer has the following three characteristics:firstly, the effect of the remnant field of the iron core on the measurement is decreased;secondly,because the temperature compensation is adopted,the transformer has good temperature charactreristic;thirdly,be-cause the wavelet transfomation technology is adopted,the transformer has the capacity of good antijanming.

  3. Current distribution measurements inside an electromagnetic plasma gun operated in a gas-puff mode.

    Science.gov (United States)

    Poehlmann, Flavio R; Cappelli, Mark A; Rieker, Gregory B

    2010-12-01

    Measurements are presented of the time-dependent current distribution inside a coaxial electromagnetic plasma gun. The measurements are carried out using an array of six axially distributed dual-Rogowski coils in a balanced circuit configuration. The radial current distributions indicate that operation in the gas-puff mode, i.e., the mode in which the electrode voltage is applied before injection of the gas, results in a stationary ionization front consistent with the presence of a plasma deflagration. The effects of varying the bank capacitance, transmission line inductance, and applied electrode voltage were studied over the range from 14 to 112 μF, 50 to 200 nH, and 1 to 3 kV, respectively.

  4. Current distribution measurements inside an electromagnetic plasma gun operated in a gas-puff mode

    Science.gov (United States)

    Poehlmann, Flavio R.; Cappelli, Mark A.; Rieker, Gregory B.

    2010-12-01

    Measurements are presented of the time-dependent current distribution inside a coaxial electromagnetic plasma gun. The measurements are carried out using an array of six axially distributed dual-Rogowski coils in a balanced circuit configuration. The radial current distributions indicate that operation in the gas-puff mode, i.e., the mode in which the electrode voltage is applied before injection of the gas, results in a stationary ionization front consistent with the presence of a plasma deflagration. The effects of varying the bank capacitance, transmission line inductance, and applied electrode voltage were studied over the range from 14 to 112 μF, 50 to 200 nH, and 1 to 3 kV, respectively.

  5. Analysis of reliability metrics and quality enhancement measures in current density imaging.

    Science.gov (United States)

    Foomany, F H; Beheshti, M; Magtibay, K; Masse, S; Foltz, W; Sevaptsidis, E; Lai, P; Jaffray, D A; Krishnan, S; Nanthakumar, K; Umapathy, K

    2013-01-01

    Low frequency current density imaging (LFCDI) is a magnetic resonance imaging (MRI) technique which enables calculation of current pathways within the medium of study. The induced current produces a magnetic flux which presents itself in phase images obtained through MRI scanning. A class of LFCDI challenges arises from the subject rotation requirement, which calls for reliability analysis metrics and specific image registration techniques. In this study these challenges are formulated and in light of proposed discussions, the reliability analysis of calculation of current pathways in a designed phantom and a pig heart is presented. The current passed is measured with less than 5% error for phantom, using CDI method. It is shown that Gauss's law for magnetism can be treated as reliability metric in matching the images in two orientations. For the phantom and pig heart the usefulness of image registration for mitigation of rotation errors is demonstrated. The reliability metric provides a good representation of the degree of correspondence between images in two orientations for phantom and pig heart. In our CDI experiments this metric produced values of 95% and 26%, for phantom, and 88% and 75% for pig heart, for mismatch rotations of 0 and 20 degrees respectively.

  6. Frequency spectra from current vs. magnetic flux density measurements for mobile phones and other electrical appliances.

    Science.gov (United States)

    Straume, Aksel; Johnsson, Anders; Oftedal, Gunnhild; Wilén, Jonna

    2007-10-01

    The frequency spectra of electromagnetic fields have to be determined to evaluate human exposure in accordance to ICNIRP guidelines. In the literature, comparisons with magnetic field guidelines have been performed by using the frequency distribution of the current drawn from the battery. In the present study we compared the frequency spectrum in the range 217 Hz to 2.4 kHz of the magnetic flux density measured near the surface of a mobile phone with the frequency spectrum of the supply current. By using the multiple frequency rule, recommended in the ICNIRP guidelines, we estimated the magnetic field exposure in the two cases. Similar measurements and estimations were done for an electric drill, a hair dryer, and a fluorescent desk lamp. All the devices have a basic frequency of 50 Hz, and the frequency spectra were evaluated up to 550 Hz. We also mapped the magnetic field in 3D around three mobile phones. The frequency distributions obtained from the two measurement methods are not equal. The frequency content of the current leads to an overestimation of the magnetic field exposure by a factor up to 2.2 for the mobile phone. For the drill, the hair dryer, and the fluorescent lamp, the supply current signal underestimated the exposure by a factor up to 2.3. In conclusion, an accurate exposure evaluation requires the magnetic flux density spectrum of the device to be measured directly. There was no indication that the devices studied would exceed the reference levels at the working distances normally used.

  7. Performance of current measurement system in poloidal field power supply for Experimental Advanced Superconducting Tokamak

    Science.gov (United States)

    Liu, D. M.; Li, J.; Wan, B. N.; Lu, Z.; Wang, L. S.; Jiang, L.; Lu, C. H.; Huang, J.

    2016-11-01

    As one of the core subsystems of the Experimental Advanced Superconducting Tokamak (EAST), the poloidal field power system supplies energy to EAST's superconducting coils. To measure the converter current in the poloidal field power system, a current measurement system has been designed. The proposed measurement system is composed of a Rogowski coil and a newly designed integrator. The results of the resistor-inductor-capacitor discharge test and the converter equal current test show that the current measurement system provides good reliability and stability, and the maximum error of the proposed system is less than 1%.

  8. Usage and Perceived Side Effects of Personal Protective Measures against Mosquitoes among Current Users in Delhi.

    Science.gov (United States)

    Kohli, Charu; Kumar, Rajesh; Meena, G S; Singh, M M; Sahoo, Jyotiranjan; Ingle, G K

    2014-01-01

    Background. Mosquito-borne diseases constitute an important cause of morbidity and mortality. The use of personal protective measures (PPM) like mats, bednets, screening, repellents, liquid vaporizers, mosquito coils, and so forth has been advocated as an effective tool in control of mosquito-borne diseases, but data about the safety profile of personal protective measures is still scarce. Objective. To study the usage and side effects of personal protective measures against mosquitoes among current users in Delhi. Materials and Methods. A community-based cross-sectional study among 350 adult individuals selected by systematic sampling method. Data was collected using pretested semistructured questionnaire after taking written informed consent. Data was analysed using SPSS version 17. Chi-square/Fisher's Exact test was used for qualitative variables to find association and P value Personal protective measures were used by 219 (62.5%) subjects. Liquid vaporizer was the most preferred method (41.4%). Most common perceived side effect of personal protective measures was headache (7.7%). Other perceived side effects were cough (3.2%), sore throat (2.7%), allergy (1.3%), and eye irritation (0.9%) predominantly among coil users. Conclusion. There is a need to have a close watch for side effects of personal protective measures among users. Further research is also needed to develop safe and effective personal protective measures against mosquitoes.

  9. First Measurement of the Neutral Current Excitation of the Delta Resonance on a Proton Target

    CERN Document Server

    Androic, D; Arvieux, J; Bailey, S L; Beck, D H; Beise, E J; Benesch, J; Benmokhtar, F; Bimbot, L; Birchall, J; Bosted, P; Breuer, H; Capuano, C L; Chao, Y -C; Coppens, A; Davis, C A; Ellis, C; Flores, G; Franklin, G; Furget, C; Gaskell, D; Grames, J; Gericke, M T W; Guillard, G; Hansknecht, J; Horn, T; Jones, M K; King, P M; Korsch, W; Kox, S; Lee, L; Liu, J; Lung, A; Mammei, J; Martin, J W; McKeown, R D; Micherdzinska, A; Mihovilovic, M; Mkrtchyan, H; Muether, M; Page, S A; Papavassiliou, V; Pate, S F; Phillips, S K; Pillot, P; Pitt, M L; Poelker, M; Quinn, B; Ramsay, W D; Real, J -S; Roche, J; Roos, P; Schaub, J; Seva, T; Simicevic, N; Smith, G R; Spayde, D T; Stutzman, M; Suleiman, R; Tadevosyan, V; van Oers, W T H; Versteegen, M; Voutier, E; Vulcan, W; Wells, S P; Williamson, S E; Wood, S A

    2012-01-01

    The parity-violating asymmetry arising from inelastic electron-nucleon scattering at backward angle (~95 degrees) near the Delta(1232) resonance has been measured using a hydrogen target. From this asymmetry, we extracted the axial transition form factor G^A_{N\\Delta}, a function of the axial Adler form factors C^A_i. Though G^A_{N\\Delta} has been previously studied using charged current reactions, this is the first measurement of the weak neutral current excitation of the Delta using a proton target. For Q^2 = 0.34 (GeV/c)^2 and W = 1.18 GeV, the asymmetry was measured to be -33.4 \\pm (5.3)_{stat} \\pm (5.1)_{sys} ppm. The value of G^A_{N\\Delta} determined from the hydrogen asymmetry was -0.05 \\pm (0.35)_{stat} \\pm (0.34)_{sys} \\pm (0.06)_{theory}. These findings agree within errors with theoretical predictions for both the total asymmetry and the form factor. In addition to the hydrogen measurement, the asymmetry was measured at the same kinematics using a deuterium target. The asymmetry for deuterium was de...

  10. Neutrino-nucleus neutral current elastic interactions measurement in MiniBooNE

    Energy Technology Data Exchange (ETDEWEB)

    Perevalov, Denis [Univ. of Alabama, Tuscaloosa, AL (United States)

    2009-12-01

    The MiniBooNE experiment at the Fermi National Accelerator Laboratory (Fermilab) was designed to search for vμ → ve neutrino oscillations at Δm2 ~ 1 eV2 using an intense neutrino flux with an average energy Ev ~ 700 MeV. From 2002 to 2009 MiniBooNE has accumulated more than 1.0 x 1021 protons on target (POT) in both neutrino and antineutrino modes. MiniBooNE provides a perfect platform for detailed measurements of exclusive and semiinclusive neutrino cross-sections, for which MiniBooNE has the largest samples of events up to date, such as neutral current elastic (NCE), neutral current π0, charged current quasi-elastic (CCQE), charged current π+, and other channels. These measured cross-sections, in turn, allow to improve the knowledge of nucleon structure. This thesis is devoted to the study of NCE interactions. Neutrino-nucleus neutral current elastic scattering (vN → vN) accounts for about 18% of all neutrino interactions in MiniBooNE. Using a high-statistics, high purity sample of NCE interactions in MiniBooNE, the flux-averaged NCE differential cross-section has been measured and is being reported here. Further study of the NCE cross-section allowed for probing the structure of nuclei. The main interest in the NCE cross-section is that it may be sensitive to the strange quark contribution to the nucleon spin, Δs, this however requires a separation of NCE proton (vp → vp) from NCE neutron (vn → vn) events, which in general is a challenging task. MiniBooNE uses a Cherenkov detector, which imposes restrictions on the measured nucleon kinematic variables, mainly due to the impossibility to reconstruct the nucleon direction below the Cherenkov threshold. However, at kinetic energies above this threshold MiniBooNE is able to identify NCE proton events that do not experience final state interactions (FSI). These events were used for the Δs measurement. In this thesis

  11. Eddy current measurement system evaluation for corrosion depth determination on cast aluminum aircraft structure

    Science.gov (United States)

    Singh, Surendra; Greving, Dan; Kinney, Andy; Vensel, Fred; Ohm, Jim; Peeler, Mike

    2013-01-01

    An eddy current (EC) technique was developed to determine the corrosion depth on a bare flange face of a cast aluminum A356-T6 aircraft engine structure. The EC response and the corrosion depths determined through metallurgical cross sections were used to develop an empirical relation between EC response and depth. The EC technique and depth determination are used to inspect the engine structures during overhaul to determine if they are fit for continued service. An accurate and reliable Non-Destructive Inspection is required to ensure that structures returned to service are safe for continued operation. NDE system reliability demonstrations of the eddy current technique are traditionally reported in terms of Probability of Detection (POD) data using MIL-HDBK-1823A. However, the calculation of POD data is based on a simple linear predictive model that is valid only if certain criteria are met. These are: 1) NDE system response is measurable (i.e. continuous data), 2) Flaw size is known and measurable (i.e. continuous data), 3) relationship between the NDE system response and flaw size is linear (or linear on a log scale), 4) variation in measured responseresponse around a predicted response for a given flaw size is normally distributed, 5) the variation around the predicted response is constant (i.e. variation does not change with flaw size), and 6) inherent variability in the NDE system is known and fully understood. In this work, a Measurement System Evaluation (MSE) of the Eddy Current System was used to address some of these concerns. This work was completed on two aircraft structures having varying corrosion depths. The data were acquired in a random manner at fifty regions of interests (ROIs). Three operators participated in this study, and each operator measured Eddy Current response three times in each ROI. In total, there were four hundred and fifty data points collected. Following this, the two structures were sectioned for measuring corrosion depth. The

  12. Experimental evaluation of IGBT junction temperature measurement via peak gate current

    DEFF Research Database (Denmark)

    Baker, Nick; Munk-Nielsen, Stig; Iannuzzo, Francesco

    2015-01-01

    Temperature sensitive electrical parameters allow junction temperature measurements on power semiconductors without modification to module packaging. The peak gate current has recently been proposed for IGBT junction temperature measurement and relies on the temperature dependent resistance of th...

  13. Field measurement on longshore current variation between Ratnagiri and Mangalore, west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Chandramohan, P.; Nayak, B.U.; Anand, N.M.; SanilKumar, V.

    The daily measurements on longshore current velocity and direction were carried out at selected 12 stations along the coast between Ratnagiri and Mangalore, India. The directional wave data measured at Karwar were used to theoretically estimate...

  14. A measurement of coherent neutral pion production in neutrino neutral current interactions in the NOMAD experiment

    Science.gov (United States)

    Kullenberg, C. T.; Mishra, S. R.; Seaton, M. B.; Kim, J. J.; Tian, X. C.; Scott, A. M.; Kirsanov, M.; Petti, R.; Alekhin, S.; Astier, P.; Autiero, D.; Baldisseri, A.; Baldo-Ceolin, M.; Banner, M.; Bassompierre, G.; Benslama, K.; Besson, N.; Bird, I.; Blumenfeld, B.; Bobisut, F.; Bouchez, J.; Boyd, S.; Bueno, A.; Bunyatov, S.; Camilleri, L.; Cardini, A.; Cattaneo, P. W.; Cavasinni, V.; Cervera-Villanueva, A.; Challis, R.; Chukanov, A.; Collazuol, G.; Conforto, G.; Conta, C.; Contalbrigo, M.; Cousins, R.; Degaudenzi, H.; De Santo, A.; Del Prete, T.; Di Lella, L.; do Couto e Silva, E.; Dumarchez, J.; Ellis, M.; Feldman, G. J.; Ferrari, R.; Ferrère, D.; Flaminio, V.; Fraternali, M.; Gaillard, J.-M.; Gangler, E.; Geiser, A.; Geppert, D.; Gibin, D.; Gninenko, S.; Godley, A.; Gomez-Cadenas, J.-J.; Gosset, J.; Gößling, C.; Gouanère, M.; Grant, A.; Graziani, G.; Guglielmi, A.; Hagner, C.; Hernando, J.; Hurst, P.; Hyett, N.; Iacopini, E.; Joseph, C.; Juget, F.; Kent, N.; Klimov, O.; Kokkonen, J.; Kovzelev, A.; Krasnoperov, A.; Kulagin, S.; Lacaprara, S.; Lachaud, C.; Lakić, B.; Lanza, A.; La Rotonda, L.; Laveder, M.; Letessier-Selvon, A.; Levy, J.-M.; Ling, J.; Linssen, L.; Ljubičić, A.; Long, J.; Lupi, A.; Lyubushkin, V.; Marchionni, A.; Martelli, F.; Méchain, X.; Mendiburu, J.-P.; Meyer, J.-P.; Mezzetto, M.; Moorhead, G. F.; Naumov, D.; Nédélec, P.; Nefedov, Yu.; Nguyen-Mau, C.; Orestano, D.; Pastore, F.; Peak, L. S.; Pennacchio, E.; Pessard, H.; Placci, A.; Polesello, G.; Pollmann, D.; Polyarush, A.; Poulsen, C.; Popov, B.; Rebuffi, L.; Rico, J.; Riemann, P.; Roda, C.; Rubbia, A.; Salvatore, F.; Samoylov, O.; Schahmaneche, K.; Schmidt, B.; Schmidt, T.; Sconza, A.; Sevior, M.; Sillou, D.; Soler, F. J. P.; Sozzi, G.; Steele, D.; Stiegler, U.; Stipčević, M.; Stolarczyk, Th.; Tareb-Reyes, M.; Taylor, G. N.; Tereshchenko, V.; Toropin, A.; Touchard, A.-M.; Tovey, S. N.; Tran, M.-T.; Tsesmelis, E.; Ulrichs, J.; Vacavant, L.; Valdata-Nappi, M.; Valuev, V.; Vannucci, F.; Varvell, K. E.; Veltri, M.; Vercesi, V.; Vidal-Sitjes, G.; Vieira, J.-M.; Vinogradova, T.; Weber, F. V.; Weisse, T.; Wilson, F. F.; Winton, L. J.; Wu, Q.; Yabsley, B. D.; Zaccone, H.; Zuber, K.; Zuccon, P.

    2009-11-01

    We present a study of exclusive neutral pion production in neutrino-nucleus Neutral Current interactions using data from the NOMAD experiment at the CERN SPS. The data correspond to 1.44 ×106 muon-neutrino Charged Current interactions in the energy range 2.5 ⩽Eν ⩽ 300 GeV. Neutrino events with only one visible π0 in the final state are expected to result from two Neutral Current processes: coherent π0 production, ν + A → ν + A +π0 and single π0 production in neutrino-nucleon scattering. The signature of coherent π0 production is an emergent π0 almost collinear with the incident neutrino while π0's produced in neutrino-nucleon deep inelastic scattering have larger transverse momenta. In this analysis all relevant backgrounds to the coherent π0 production signal are measured using data themselves. Having determined the backgrounds, and using the Rein-Sehgal model for the coherent π0 production to compute the detection efficiency, we obtain 4630 ± 522 (stat) ± 426 (syst) corrected coherent-π0 events with Eπ0 ⩾ 0.5 GeV. We measure σ (νA → νAπ0) = [ 72.6 ± 8.1 (stat) ± 6.9 (syst) ] ×10-40 cm2 /nucleus. This is the most precise measurement of the coherent π0 production to date.

  15. Measurements of current speed using an Aanderaa RCM4 current meter in the presence of surface waves

    Science.gov (United States)

    Sherwin, T. J.

    1988-02-01

    It is shown that the Aanderaa RCM4 with Savonius rotor integrates motions that have a period significantly smaller than the recording interval, thus causing a quantifiable amplification of the observed mean speed. The minimum speed that can be recorded is 2ν/;π, where ν is the amplitude of the speed of the oscillating motion. In general, the amplification factor decreases as the ratio of mean speed over ν increases. The theory appears to explain the difference in observations made by an Aanderaa RCM4 and a neighbouring EG&G VMCM when particle velocities due to swell are included. It is recommended that vector averaging current meters should be used for current measurement in the upper 50-100 m of shelf sea regions that experience small tidal currents and a large oceanic swell.

  16. Geared induction motor fault diagnosis by current, noise and vibration considering measurement environment

    Directory of Open Access Journals (Sweden)

    Ki-Seok Kim

    2017-01-01

    Full Text Available Lots of motors have been being used in industry. Therefore many studies have been carried out about the failure diagnosis of motors. In this paper, a diagnosis of gear fault connected to a motor shaft is studied. The fault diagnosis is executed through the comparison of normal gear and abnormal gear. In the abnormal gearbox, a tooth of the intermediate gear is damaged. The measured FFT data are compared with the normal data and analyzed for q-axis current, noise and vibration. Fault gear was found by comparing the FFT with normal FFT. From these, the difference between the normal and abnormal states can be seen by the frequency characteristic analysis for the current as well as noise and vibration.

  17. 75 FR 9232 - Measuring Progress on Food Safety: Current Status and Future Directions; Public Workshop

    Science.gov (United States)

    2010-03-01

    ... HUMAN SERVICES Food and Drug Administration Measuring Progress on Food Safety: Current Status and Future... about current and potential measurements for assessing progress in food safety and associated... workshop, contact Juanita Yates, Center for Food Safety and Applied Nutrition (HFS-009), Food and...

  18. On wind Turbine failure detection from measurements of phase currents: a permutation entropy approach

    CERN Document Server

    Ram, Sumit Kumar; Molinas, Marta

    2016-01-01

    This article presents the applicability of Permutation Entropy based complexity measure of a time series for detection of fault in wind turbines. A set of electrical data from one faulty and one healthy wind turbine were analysed using traditional FastFourier analysis in addition to Permutation Entropy analysis to compare the complexity index of phase currents of the two turbines over time. The 4 seconds length data set did not reveal any low frequency in the spectra of currents, neither did they show any meaningful differences of spectrum between the two turbine currents. Permutation Entropy analysis of the current waveforms of same phases for the two turbines are found to have different complexity values over time, one of them being clearly higher than the other. The work of Yan et. al. in has found that higher entropy values related to thepresence of failure in rotary machines in his study. Following this track, further efforts will be put into relating the entropy difference found in our study to possible...

  19. Measurement and interpretation of current transmission in a crossed-field diode below cutoff

    Energy Technology Data Exchange (ETDEWEB)

    Vanderberg, B.H.; Eninger, J.E. [Department of Industrial Electrotechnology, Royal Institute of Technology, S-100 44 Stockholm (Sweden)

    1997-02-01

    Measurements on the current-voltage-magnetic field characteristics of a space-charge-limited cylindrical cross-field diode below cutoff are presented. The measured current is found to be lower than predicted by simple cold-fluid theory. This reduction combined with observed oscillations in the current can be explained by secondary electron emission from the anode, leading to an increase of space charge in the diode. {copyright} {ital 1997 American Institute of Physics.}

  20. Measurement of Neutrino-Nucleon Neutral Current Elastic Scattering in MiniBooNE

    CERN Document Server

    Perevalov, Denis

    2009-01-01

    Using a high-statistics sample of neutral current elastic neutrino interactions, MiniBooNE measured the flux-averaged neutral current elastic differential cross-section on mineral oil ($CH_2$). Using the latter, a $\\chi^2$ test of MC with different values of the axial vector mass has been performed. Also, a possibility of using a sample of neutral current elastic proton-enriched events above Cherenkov threshold to measure the ratio $\

  1. The Research of Through-casing Resistivity Logging Logging Calibration System Leakage Current Measurement Method

    Directory of Open Access Journals (Sweden)

    ZHANG Jiatian

    2013-07-01

    Full Text Available This paper introduces the logging principle of through-casing resistivity logging technology, finds a phenomenon that the leakage current measurements are susceptible to sufferring interferences. The through-casing resistivity logging technology in Russia and that of Schlumberger are studied, and the system of through-casing resistivity logging is established to improve the accuracy of calibrating, testing and measuring of the instrument. In this paper, distribution parameters of the form is replaced by the lumped parameter, and precision resistor array simulation in formation leakage current and scale pool simulation in different resistivity of formation are conducted, which make the dynamic range of the simulation in formation resistivity of the medium increase to 1- 300 Ω·m and meet the requirement of through-casing resistivity logging technology measurement range, 1 Ω·m ~ 100 Ω·m. Since the measuring signals of calibration acquisition and processing systems are extremely weak and calculation signals need to tell the nV (nanovolts level, the high accurate data acquisition system of 24 digits is applied.

  2. Studying Photosynthesis by Measuring Fluorescence

    Science.gov (United States)

    Sanchez, Jose Francisco; Quiles, Maria Jose

    2006-01-01

    This paper describes an easy experiment to study the absorption and action spectrum of photosynthesis, as well as the inhibition by heat, high light intensity and the presence of the herbicide 3-(3,4-dichlorophenyl)-1,1-dimethylurea (DCMU) on the photosynthetic process. The method involves measuring the chlorophyll fluorescence emitted by intact…

  3. Current measurement in high-performance frequency converters; Strommessung in Hochleistungsumrichtern

    Energy Technology Data Exchange (ETDEWEB)

    Marien, Jan; Hetzler, Ullrich [Isabellenhuette Heusler GmbH und Co. KG, Dillenburg (Germany); Hornung, Hans-Georg; Zwinger, Stefan [Sensor-Technik Wiedemann GmbH, Kaufbeuren (Germany)

    2011-04-15

    The load cycles (raising, lowering, accelerating, braking) of cranes, lift trucks and other off-road vehicles are ideally suited for the efficient deployment of hybrid or full electrical drive technology. Current measurement is a key technology for advancing electrification. Sensor Technik Wiedemann places by her frequency converters on a shunt-based current measurement module from Isabellenhuette Heusler which permits highly accurate measurements. (orig.)

  4. Separation of conductivity and distance measurements for eddy current nondestructive inspection of graphite composite materials

    Science.gov (United States)

    Dufour, Isabelle; Placko, Dominique

    1993-06-01

    This article deals with the study of a process based on the principle of eddy current sensors for the nondestructive evaluation of graphite composite plates. This research has been carried out in the Laboratoire d'Electricitd Signaux et Robotique by the team working on datacollecting sensors for robotics in collaboration with Aerospatiale. Eddy current sensors are characterized by their impedance, which varies when a conducting material is approached in their sensitive area. For a given sensor, the output signal depends directly on the electrical and geometrical properties of the object. In the case discussed here, the interesting data are the distance between the sensor and the object, and its local conductivity. In order to invert the relationships between the sensor signal and the properties of the material, an external parametrical model has been developed. A scanning of the surface with a sensor designed for good spatial resolution measurements gives two accurate maps of the useful data.

  5. Measuring neutrino-induced exclusive charge-current final states on hydrogen at T2K

    CERN Document Server

    Coplowe, David; Barr, Giles

    2016-01-01

    By taking advantage of symmetries with respect to the plane containing the directions of the neutrino and outgoing lepton, it is possible to isolate neutrino interactions on hydrogen in composite nuclear targets. This technique enables us to study the `primary' neutrino-nucleon interaction and therefore gain access to fundamental model parameters free from nuclear effects. Using T2K Monte Carlo equivalent to $\\sim7\\times10^{21}$ POT, we present an update on the measurement of the exclusive charged-current $\\mu^-$, p, $\\pi^+$ final state on hydrogen.

  6. Leakage current measurement of protective equipment insulating materials used in electrical installations

    Science.gov (United States)

    Buică, G.; Dobra, R.; Păsculescu, D.; Tătar, A.

    2016-06-01

    This research describes the behaviour of equipment and safety devices during use in extreme environmental conditions, in order to establish the technical conditions and additional health and safety requirements during operation, to ensure the health and safety of users, regardless of conditions and working environment in which they are use. The studies have been conducted both on new equipment and means of protection used in electrical installations. There has been evaluated protective equipment made of insulating rubber, reinforced fiberglass or PVC. They have been followed the technical characteristics and protection against electric shock by measuring the leakage current of different insulating materials.

  7. Measuring nu(mu) charged-current muon neutrino interactions in MiniBooNE

    Energy Technology Data Exchange (ETDEWEB)

    Wascko, M.O.; /Louisiana State U.

    2004-12-01

    MiniBooNE seeks to confirm or refute the LSND {bar {nu}}{sub {mu}} {yields} {bar {nu}}{sub e} oscillation signal with high statistical significance and different systematics. MiniBooNE has accumulated the world's largest {approx} 1 GeV neutrino data set. MiniBooNE employs a cosmic muon calibration system to study the reconstruction of the energies and directions of muons in the detector. Progress of measurements of the {nu}{sub {mu}} charged-current quasi-elastic and single pion production cross sections are presented.

  8. Acoustic Doppler current profiler measurements in coastal and estuarine environments: examples from the Tay Estuary, Scotland

    Science.gov (United States)

    Wewetzer, Silke F. K.; Duck, Robert W.; Anderson, James M.

    1999-08-01

    Acoustic Doppler current profilers (ADCPs) provide a means to measure the components of water current velocities in three dimensions. Such instruments have been used widely by the oil industry in deep offshore waters but their application to nearshore coastal and estuarine environments has been principally confined to the USA. Using examples of ADCP datasets acquired from the macrotidal Tay Estuary, eastern Scotland, the principles of field deployment, data acquisition and forms of output are critically summarised. It is shown, for the first time in the Tay Estuary, that vertical current velocities are significant and are particularly so in downwelling zones associated with the development and passage of axially convergent tidal fronts. The improved understanding of three-dimensional water and suspended sediment dynamics in coastal and estuarine waters is crucial to, inter alia, the sustainable management of effluent discharges and, in more general terms, it is predicted on the basis of the Tay case study, that ADCP measurements afford significant opportunities to refine understanding of geomorphological processes in a variety of aquatic environments worldwide.

  9. Reconstruction of conductivity and current density images using only one component of magnetic field measurements.

    Science.gov (United States)

    Seo, Jin Keun; Yoon, Jeong-Rock; Woo, Eung Je; Kwon, Ohin

    2003-09-01

    Magnetic resonance current density imaging (MRCDI) is to provide current density images of a subject using a magnetic resonance imaging (MRI) scanner with a current injection apparatus. The injection current generates a magnetic field that we can measure from MR phase images. We obtain internal current density images from the measured magnetic flux densities via Ampere's law. However, we must rotate the subject to acquire all of the three components of the induced magnetic flux density. This subject rotation is impractical in clinical MRI scanners when the subject is a human body. In this paper, we propose a way to eliminate the requirement of subject rotation by careful mathematical analysis of the MRCDI problem. In our new MRCDI technique, we need to measure only one component of the induced magnetic flux density and reconstruct both cross-sectional conductivity and current density images without any subject rotation.

  10. Extending the GMR Current Measurement Range with a Counteracting Magnetic Field

    Directory of Open Access Journals (Sweden)

    Tin Yan Poon

    2013-06-01

    Full Text Available Traditionally, current transformers are often used for current measurement in low voltage (LV electrical networks. They have a large physical size and are not designed for use with power electronic circuits. Semiconductor-based current sensing devices such as the Hall sensor and Giant Magnetoresistive (GMR sensor are advantageous in terms of small size, high sensitivity, wide frequency range, low power consumption, and relatively low cost. Nevertheless, the operational characteristics of these devices limit their current measurement range. In this paper, a design based on using counteracting magnetic field is introduced for extending the GMR current measurement range from 9 A (unipolar to ±45 A. A prototype has been implemented to verify the design and the linear operation of the circuit is demonstrated by experimental results. A microcontroller unit (MCU is used to provide an automatic scaling function to optimize the performance of the proposed current sensor.

  11. Classification of methods for measuring current-voltage characteristics of semiconductor devices

    Directory of Open Access Journals (Sweden)

    Iermolenko Ia. O.

    2014-06-01

    Full Text Available It is shown that computer systems for measuring current-voltage characteristics are very important for semiconductor devices production. The main criteria of efficiency of such systems are defined. It is shown that efficiency of such systems significantly depends on the methods for measuring current-voltage characteristics of semiconductor devices. The aim of this work is to analyze existing methods for measuring current-voltage characteristics of semiconductor devices and to create the classification of these methods in order to specify the most effective solutions in terms of defined criteria. To achieve this aim, the most common classifications of methods for measuring current-voltage characteristics of semiconductor devices and their main disadvantages are considered. Automated and manual, continuous, pulse, mixed, isothermal and isodynamic methods for measuring current-voltage characteristics are analyzed. As a result of the analysis and generalization of existing methods the next classification criteria are defined: the level of automation, the form of measurement signals, the condition of semiconductor device during the measurements, and the use of mathematical processing of the measurement results. With the use of these criteria the classification scheme of methods for measuring current-voltage characteristics of semiconductor devices is composed and the most effective methods are specified.

  12. Interpretation of very low frequency electromagnetic measurements in terms of normalized current density over variable topography

    Science.gov (United States)

    Singh, Anand; Sharma, S. P.

    2016-10-01

    A 2D inversion approach is developed to interpret VLF electromagnetic measurement recorded over variable topography. To depict the variable topography accurately, an octree mesh discretization is incorporated. Subsurface structure is modeled in terms of apparent current density distribution and compared with the inversion results for actual resistivity distribution obtained using numerical techniques. The study demonstrates that the results obtained using both approaches (current density and resistivity distribution) are comparable, but due to analytical expression, current density imaging is faster. The conjugate gradient method is used to reduce the computation time and storage space when solving the matrix equations, resulting in feasible and practical imaging inversion of VLF data. The preconditioned matrix, which is determined by the distances between the blocks and observation points, has an important function in improving the resolution. In case of flat earth, preconditioned conjugate gradient inversion of data results in images that are comparable to those obtained using resistivity inversion. We also test whether topography variation in the order of skin depth is significant to incorporate topography in the modeling. The example of a topographical field VLF data inversion shows the efficacy of the presented approach to appraise the subsurface structure in terms of current density.

  13. Sunlight effects on the 3D polar current system determined from low Earth orbit measurements

    CERN Document Server

    Laundal, Karl M; Olsen, Nils

    2016-01-01

    Interaction between the solar wind and the Earth's magnetosphere is associated with large-scale currents in the ionosphere at polar latitudes that flow along magnetic field lines (Birkeland currents) and horizontally. These current systems are tightly linked, but their global behaviors are rarely analyzed together. In this paper, we present estimates of the average global Birkeland currents and horizontal ionospheric currents from the same set of magnetic field measurements. The magnetic field measurements, from the low Earth orbiting $\\textit{Swarm}$ and CHAMP satellites, are used to co-estimate poloidal and toroidal parts of the magnetic disturbance field, represented in magnetic apex coordinates. The use of apex coordinates reduces effects of longitudinal and hemispheric variations in the Earth's main field. We present global currents from both hemispheres during different sunlight conditions. The results show that the Birkeland currents vary with the conductivity, which depends most strongly on solar EUV ...

  14. Detection of thin current sheets and associated reconnection in the Earth's turbulent magnetosheath using cluster multi-point measurements

    Science.gov (United States)

    Chasapis, Alexandros; Retino, Alessandro; Sahraoui, Fouad; Greco, Antonella; Vaivads, Andris; Sundkvist, David; Canu, Patrick

    2013-04-01

    Magnetic reconnection occurs in turbulent plasma within a large number of volume-filling thin current sheets and is one major candidate for energy dissipation of turbulent plasma. Such dissipation results in particle heating and non-thermal particle acceleration. In situ observations are needed to study the detailed properties of thin current sheets and associated reconnection, in order to determine its importance as a dissipation mechanism at small scales. In particular, multi-point measurements are crucial to unambiguously identify spatial scales (e.g current sheet thickness) and estimate key quantities such as E*J. Here we present a study of the properties of thin current sheets detected in the Earths magnetosheath downstream of the quasi-parallel shock by using Cluster spacecraft data. The current sheets were detected by the rotation of the magnetic field as computed by four-point measurements. We study the distribution of current sheets as a function of the magnetic shear angle θ, their duration and the waiting time between consecutive current sheets. We found that high shear (θ > 90 degrees) current sheets show different properties with respect to low shear current sheets (θ < 90 degrees). These high-shear current sheets account for about ˜ 20% of the total and have an average thickness comparable to the ion inertial length. We also compare our four-point detection method with other single-point methods (e.g. Partial Variance of Increments - PVI) and we discuss the results of such comparison.

  15. Theoretical studies of non inductive current drive in compact toroids

    NARCIS (Netherlands)

    Farengo, R; Lifschitz, AF; Caputi, KI; Arista, NR; Clemente, RA

    2002-01-01

    Three non inductive current drive methods that can be applied to compact toroids axe studied. The use of neutral beams to drive current in field reversed configurations and spheromaks is studied using a Monte Carlo code that includes a complete ionization package and follows the exact particle orbit

  16. An Intrinsic Fiber-Optic Sensor for Structure Lightning Current Measurement

    Science.gov (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.; Mata, Carlos T.; Mata, Angel. G.; Snyder, Gary P.

    2014-01-01

    An intrinsic optical-fiber sensor based on Faraday Effect is developed that is highly suitable for measuring lightning current on aircraft, towers and complex structures. Originally developed specifically for aircraft installations, it is light-weight, non-conducting, structure conforming, and is immune to electromagnetic interference, hysteresis and saturation. It can measure total current down to DC. When used on lightning towers, the sensor can help validate other sensors and lightning detection network measurements. Faraday Effect causes light polarization to rotate when the fiber is exposed to a magnetic field in the direction of light propagation. Thus, the magnetic field strength can be determined from the light polarization change. By forming closed fiber loops and applying Ampere's law, measuring the total light rotation yields the total current enclosed. A broadband, dual-detector, reflective polarimetric scheme allows measurement of both DC component and AC waveforms with a 60 dB dynamic range. Two systems were built that are similar in design but with slightly different sensitivities. The 1310nm laser system can measure 300 A - 300 kA, and has a 15m long sensing fiber. It was used in laboratory testing, including measuring current on an aluminum structure simulating an aircraft fuselage or a lightning tower. High current capabilities were demonstrated up to 200 kA at a lightning test facility. The 1550nm laser system can measure 400 A - 400 kA and has a 25m fiber length. Used in field measurements, excellent results were achieved in the summer of 2012 measuring rocket-triggered lightning at the International Center for Lightning Research and Testing (ICLRT), Camp Blanding, Florida. In both systems increased sensitivity can be achieved with multiple fiber loops. The fiber optic sensor provides many unique capabilities not currently possible with traditional sensors. It represents an important new tool for lightning current measurement where low weight

  17. The performance of integrated transconductance amplifiers as variable current sources for bio-electric impedance measurements.

    Science.gov (United States)

    Smith, D N

    1992-01-01

    Multiple applied current impedance measurement systems require numbers of current sources which operate simultaneously at the same frequency and within the same phase but at variable amplitudes. Investigations into the performance of some integrated operational transconductance amplifiers as variable current sources are described. Measurements of breakthrough, non-linearity and common-mode output levels for LM13600, NE5517 and CA3280 were carried out. The effects of such errors on the overall performance and stability of multiple current systems when driving floating loads are considered.

  18. Sunlight effects on the 3D polar current system determined from low Earth orbit measurements

    DEFF Research Database (Denmark)

    Laundal, Karl M.; Finlay, Chris; Olsen, Nils

    2016-01-01

    analyzed together. In this paper, we present estimates of the average global Birkeland currents and horizontal ionospheric currents from the same set of magnetic field measurements. The magnetic field measurements, from the low Earth orbiting Swarm and CHAMP satellites, are used to co-estimate poloidal...... show that the Birkeland currents vary with the conductivity, which depends most strongly on solar EUV emissions on the dayside and on particle precipitation at pre-midnight magnetic local times. In sunlight, the horizontal equivalent current flows in two cells, resembling an opposite ionospheric...

  19. SPEAR-1: An experiment to measure current collection in the ionosphere by high voltage biased conductors

    Science.gov (United States)

    Raitt, W. John; Myers, Neil B.; Roberts, Jon A.; Thompson, D. C.

    1990-01-01

    An experiment is described in which a high electrical potential difference, up to 45 kV, was applied between deployed conducting spheres and a sounding rocket in the ionosphere. Measurements were made of the applied voltage and the resulting currents for each of 24 applications of different high potentials. In addition, diagnostic measurements of optical emissions in the vicinity of the spheres, energetic particle flow to the sounding rocket, dc electric field and wave data were made. The ambient plasma and neutral environments were measured by a Langmuir probe and a cold cathode neutral ionization gauge, respectively. The payload is described and examples of the measured current and voltage characteristics are presented. The characteristics of the measured currents are discussed in terms of the diagnostic measurements and the in-situ measurements of the vehicle environment. In general, it was found that the currents observed were at a level typical of magnetically limited currents from the ionospheric plasma for potentials less than 12 kV, and slightly higher for larger potentials. However, due to the failure to expose the plasma contactor, the vehicle sheath modified the sphere sheaths and made comparisons with the analytic models of Langmuir-Blodgett and Parker-Murphy less meaningful. Examples of localized enhancements of ambient gas density resulting from the operation of the attitude control system thrusters (cold nitrogen) were obtained. Current measurements and optical data indicated localized discharges due to enhanced gas density that reduced the vehicle-ionosphere impedance.

  20. A 128-channel picoammeter system and its application on charged particle beam current distribution measurements

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Deyang, E-mail: d.yu@impcas.ac.cn; Liu, Junliang; Xue, Yingli; Zhang, Mingwu; Cai, Xiaohong; Hu, Jianjun; Dong, Jinmei [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Li, Xin [School of Nuclear Science and Technology, Lanzhou University, Lanzhou 730000 (China)

    2015-11-15

    A 128-channel picoammeter system is constructed based on instrumentation amplifiers. Taking advantage of a high electric potential and narrow bandwidth in DC energetic charged beam measurements, a current resolution better than 5 fA can be achieved. Two sets of 128-channel strip electrodes are implemented on printed circuit boards and are employed for ion and electron beam current distribution measurements. Tests with 60 keV O{sup 3+} ions and 2 keV electrons show that it can provide exact boundaries when a positive charged particle beam current distribution is measured.

  1. Measurement of weak magnetic field of corrosion current of isolated corrosion center

    Directory of Open Access Journals (Sweden)

    I. V. Bardin

    2015-01-01

    Full Text Available A very small magnetic field of corrosion current, of the order of 10−4 Oe, generated by isolated zinc inclusion in a copper platelet placed in electrolyte has been measured for the first time with a highly sensitive giant magneto-impedance magnetometer. The total corrosion current of the inclusion is estimated comparing the measured magnetic field distribution with corresponding theoretical calculation. The estimated value of the total corrosion current turns out to be in reasonable agreement with that one obtained in the standard gravimetric measurement.

  2. A 128-channel picoammeter system and its application on charged particle beam current distribution measurements

    CERN Document Server

    Yu, Deyang; Xue, Yingli; Zhang, Mingwu; Cai, Xiaohong; Hu, Jianjun; Dong, Jinmei; Li, Xin

    2015-01-01

    A 128-channel picoammeter system is constructed based on instrumentation amplifiers. Taking the advantages of high electric potential and narrow bandwidth in DC energetic charged beam measurements, current resolution better than 5 fA can be achieved. Two 128-channel Faraday cup arrays are built, and are employed for ion and electron beam current distribution measurements. Tests with 60 keV O3+ ions and 2 keV electrons show that it can provide exact boundaries when a positive charged particle beam current distribution is measured.

  3. Usage and Perceived Side Effects of Personal Protective Measures against Mosquitoes among Current Users in Delhi

    Directory of Open Access Journals (Sweden)

    Charu Kohli

    2014-01-01

    Full Text Available Background. Mosquito-borne diseases constitute an important cause of morbidity and mortality. The use of personal protective measures (PPM like mats, bednets, screening, repellents, liquid vaporizers, mosquito coils, and so forth has been advocated as an effective tool in control of mosquito-borne diseases, but data about the safety profile of personal protective measures is still scarce. Objective. To study the usage and side effects of personal protective measures against mosquitoes among current users in Delhi. Materials and Methods. A community-based cross-sectional study among 350 adult individuals selected by systematic sampling method. Data was collected using pretested semistructured questionnaire after taking written informed consent. Data was analysed using SPSS version 17. Chi-square/Fisher’s Exact test was used for qualitative variables to find association and P value <0.05 was considered significant. Results. Out of 350 families selected, 210 belonged to rural area and 140 to urban area. Personal protective measures were used by 219 (62.5% subjects. Liquid vaporizer was the most preferred method (41.4%. Most common perceived side effect of personal protective measures was headache (7.7%. Other perceived side effects were cough (3.2%, sore throat (2.7%, allergy (1.3%, and eye irritation (0.9% predominantly among coil users. Conclusion. There is a need to have a close watch for side effects of personal protective measures among users. Further research is also needed to develop safe and effective personal protective measures against mosquitoes.

  4. A Measurement Of The Neutrino Neutral Current Pion Cross Section At Miniboone

    CERN Document Server

    Raaf, Jennifer L

    2005-01-01

    The MiniBooNE neutrino beam and detector at Fermilab are used to study the production of neutral current π0 events. The cross sections for neutrino interactions with mineral oil (CH2) are reported for resonantly produced and coherently produced single π0 events. We measure a resonant single π0 cross section of σ(ν μ N → νμ N π0) = (0.0129±0.0011 (stat.)±0.0043 (syst.)) × 10-36 cm2/CH 2 at a mean neutrino energy of 1.26 GeV. We measure a coherent single π 0 cross section of σ(νμ A → νμ A π0) = (0.00077±0.00016 (stat.)±0.00036 (cyst.)) × 10-36 cm2/CH 2 at mean neutrino energy 1.12 GeV.

  5. Measurement of azimuthal asymmetries in neutral current deep inelastic scattering at HERA

    Energy Technology Data Exchange (ETDEWEB)

    Chekanov, S.; Derrick, M.; Magill, S. [Argonne National Laboratory, Argonne, IL (US)] (and others)

    2006-08-15

    The distribution of the azimuthal angle of charged and neutral hadrons relative to the lepton plane has been studied for neutral current deep inelastic ep scattering using an integrated luminosity of 45 pb{sup -1} taken with the ZEUS detector at HERA. The measurements were made in the hadronic centre-of-mass system. The analysis exploits the energy-flow method, which allows the measurement to be made over a larger range of pseudorapidity compared to previous results. The dependence of the moments of the azimuthal distributions on the pseudorapidity and minimum transverse energy of the final-state hadrons are presented. Although the predictions from next-to-leading-order QCD describe the data better than do the Monte Carlo models incorporating leading-logarithm parton showers, they still fail to describe the magnitude of the asymmetries. This suggests that higher-order calculations may be necessary to describe these data. (Orig.)

  6. Measurement of azimuthal asymmetries in neutral current deep inelastic scattering at HERA

    CERN Document Server

    Chekanov, S; Magill, S; Miglioranzi, S; Musgrave, B; Nicholass, D; Repond, J; Yoshida, R; Mattingly, M C K; Pavel, N; Yagues-Molina, A G; Antonelli, S; Antonioli, P; Bari, G; Basile, M; Bellagamba, L; Bindi, M; Boscherini, D; Bruni, A; Bruni, G; Cifarelli, L; Cindolo, F; Contin, A; Corradi, M; De Pasquale, S; Iacobucci, G; Margotti, A; Nania, R; Polini, A; Rinaldi, L; Sartorelli, G; Zichichi, A; Aghuzumtsyan, G; Bartsch, D; Brock, I; Goers, S; Hartmann, H; Hilger, E; Jakob, H P; Jüngst, M; Kind, O M; Paul, E; Rautenberg, J; Renner, R; Samson, U; Schonberg, V; Wang, M; Wlasenko, M; Brook, N H; Heath, G P; Morris, J D; Namsoo, T; Capua, M; Fazio, S; Mastroberardino, A; Schioppa, M; Susinno, G; Tassi, E; Kim, J Y; Ma, K J; Ibrahim, Z A; Kamaluddin, B; Wan-Abdullah, W A T; Ning, Y; Ren, Z; Sciulli, F; Chwastowski, J; Eskreys, Andrzej; Figiel, J; Galas, A; Gil, M; Olkiewicz, K; Stopa, P; Zaw, I; Adamczyk, L; Bold, T; Grabowska-Bold, I; Kisielewska, D; Lukasik, J; Przybycien, M B; Suszycki, L; Kotanski, A; Slominski, W; Adler, V; Behrens, U; Bloch, I; Bonato, A; Borras, K; Coppola, N; Fourletova, J; Geiser, A; Gladkov, D; Göttlicher, P; Gregor, I; Gutsche, O; Haas, T; Hain, W; Horn, C; Kahle, B; Kötz, U; Kowalski, H; Lim, H; Lobodzinska, E; Löhr, B; Mankel, R; Melzer--, I A; Pellmann; Montanari, A; Nguyen, C N; Notz, D; Nuncio-Quiroz, A E; Santamarta, R; Schneekloth, U; Spiridonov, A A; Stadie, H; Stösslein, U; Szuba, D; Szuba, J; Theedt, T; Watt, G; Wolf, G; Wrona, K; Youngman, C; Zeuner, W; Schlenstedt, S; Barbagli, G; Gallo, E; Pelfer, P G; Bamberger, A; Dobur, D; Karstens, F; Vlasov, N N; Bussey, P J; Doyle, A T; Dunne, W; Ferrando, J; Saxon, D H; Skillicorn, I O; Gialas, I; Gosau, T; Holm, U; Klanner, Robert; Lohrmann, E; Salehi, H; Schleper, P; Schörner-Sadenius, T; Sztuk, J; Wichmann, K; Wick, K; Foudas, C; Fry, C; Long, K R; Tapper, A D; Kataoka, M; Matsumoto, T; Nagano, K; Tokushuku, K; Yamada, S; Yamazaki, Y; Barakbaev, A N; Boos, E G; Dossanov, A; Pokrovskiy, N S; Zhautykov, B O; Son, D; De Favereau, J; Piotrzkowski, K; Barreiro, F; Glasman, C; Jiménez, M; Labarga, L; Del Peso, J; Ron, E; Terron, J; Zambrana, M; Corriveau, F; Liu, C; Walsh, R; Zhou, C; Tsurugai, T; Antonov, A; Dolgoshein, B A; Rubinsky, I; Sosnovtsev, V; Stifutkin, A; Suchkov, S; Dementiev, R K; Ermolov, P F; Gladilin, L K; Katkov, I I; Khein, L A; Korzhavina, I A; Kuzmin, V A; Levchenko, B B; Lukina, O Yu; Proskuryakov, A S; Shcheglova, L M; Zotkin, D S; Zotkin, S A; Abt, I; Büttner, C; Caldwell, A; Kollar, D; Schmidke, W B; Sutiak, J; Grigorescu, G; Keramidas, A; Koffeman, E; Kooijman, P; Pellegrino, A; Tiecke, H G; Vázquez, M; Wiggers, L; Brümmer, N; Bylsma, B; Durkin, L S; Lee, A; Ling, T Y; Allfrey, P D; Bell, M A; Cooper-Sarkar, A M; Cottrell, A; Devenish, R C E; Foster, B; Gwenlan, C; Korcsak-Gorzo, K; Patel, S; Roberfroid, V; Robertson, A; Straub, P B; Uribe-Estrada, C; Walczak, R; Bellan, P M; Bertolin, A; Brugnera, R; Carlin, R; Ciesielski, R; Dal Corso, F; Dusini, S; Garfagnini, A; Limentani, S; Longhin, A; Stanco, L; Turcato, M; Oh, B Y; Raval, A; Ukleja, J; Whitmore, J J; Iga, Y; D'Agostini, G; Marini, G; Nigro, A; Cole, J E; Hart, J C; Abramowicz, H; Gabareen, A; Ingbir, R; Kananov, S; Levy, A; Kuze, M; Hori, R; Kagawa, S; Shimizu, S; Tawara, T; Hamatsu, R; Kaji, H; Kitamura, S; Ota, O; Ri, Y D; Ferrero, M I; Monaco, V; Sacchi, R; Solano, A; Arneodo, M; Ruspa, M; Fourletov, S; Martin, J F; Boutle, S K; Butterworth, J M; Hall-Wilton, R; Jones, T W; Loizides, J H; Sutton, M R; Targett-Adams, C; Wing, M; Brzozowska, B; Ciborowski, J; Grzelak, G; Kulinski, P; Luzniak, P; Malka, J; Nowak, R J; Pawlak, J M; Tymieniecka, T; Ukleja, A; Adamus, M; Plucinsky, P P; Eisenberg, Y; Giller, I; Hochman, D; Karshon, U; Rosin, M; Brownson, E; Danielson, T; Everett, A; Kcira, D; Reeder, D D; Ryan, P; Savin, A A; Smith, W H; Wolfe, H; Bhadra, S; Catterall, C D; Cui, Y; Hartner, G; Menary, S; Noor, U; Soares, M; Standage, J; Whyte, J

    2006-01-01

    The distribution of the azimuthal angle of charged and neutral hadrons relative to the lepton plane has been studied for neutral current deep inelastic $ep$ scattering using an integrated luminosity of 45 pb-1 taken with the ZEUS detector at HERA. The measurements were made in the hadronic centre-of-mass system. The analysis exploits the energy-flow method, which allows the measurement to be made over a larger range of pseudorapidity compared to previous results. The dependence of the moments of the azimuthal distributions on the pseudorapidity and minimum transverse energy of the final-state hadrons are presented. Although the predictions from next-to-leading-order QCD describe the data better than do the Monte Carlo models incorporating leading-logarithm parton showers, they still fail to describe the magnitude of the asymmetries. This suggests that higher-order calculations may be necessary to describe these data.

  7. Statistical measures of genetic differentiation of populations:Rationales, history and current states

    Institute of Scientific and Technical Information of China (English)

    Liang MA; Ya-Jie JI; De-Xing ZHANG

    2015-01-01

    Population differentiation is a fundamental process of evolution, and many evolutionary studies, such as population genetics, phylogeography and conservation biology, all require the inference of population differentiation. Recently, there has been a lot of debate over the validity ofFST (and its analogueGST) as a measure for population genetic differentiation, notably since the proposal of the new indexD in 2008. Although several papers reviewed or explored specific features of these statistical measures, a succinct account of this bewildering issue with an overall update appears to be desirable. This is the purpose of the present review. The available statistics generally fall into two categories, represented byFST andD, respectively. None of them is perfect in measuring population genetic differentiation. Nevertheless, they each have advantages and are valuable for current re-search. In practice, both indices should be calculated and a comparison of them can generate useful insights into the evolutionary processes that influence population differentiation.FST (GST) has some unique irreplaceable characteristics assuring its standing as the default measure for the foreseeable near future. Also, it will continue to serve as the standard for any alternative measures to contrast with. Instead of being anxious about making choice between these indices, one should pay due attention to the equili-brium status and the level of diversity (especiallyHS) of the populations, since they largely sway the power of a given statistic to address a specific question. We provide a multi-faceted comparative summary of the various statistics, which can serve as a basic reference for readers to guide their applications [Current Zoology 61 (5): 886–897, 2015].

  8. Climate Change Adaption Measures in the Coastal City of Semarang, Indonesia: Current Practices and Performance

    Directory of Open Access Journals (Sweden)

    Nurrohman Wijaya

    2015-04-01

    Full Text Available Abstrak. Indonesia merupakan salah satu negara yang sangat rawan terhadap perubahan iklim dikarenakan oleh garis pantainya yang panjang, adanya konsentrasi penduduk dan kegiatan ekonomi di kawasan pesisir. Selain itu, dampak perubahan iklim telah memberikan akibat yang serius terhadap aspek lingkungan, sosial dan ekonomi. Untuk mengurangi dampak yang terjadi, maka diperlukan suatu proses dan intervensi tambahan melalui beberapa tindakan adaptasi. Beberapa upaya adaptasi terhadap perubahan iklim telah dilaksanakan di kota-kota pesisir di Indonesia. Artikel ini bertujuan untuk mengkaji praktik dan kinerja dari tindakan adaptasi perubahan iklim pada tingkat lokal di kota pesisir Semarang. Tindakan adaptasi tersebut yaitu integrasi strategi ketahanan iklim dengan perencanaan kota, serta strategi adaptasi fisik dalam penanggulangan bencana banjir. Temuan studi ini menyatakan bahwa kinerja tiap tindakan adaptasi memberikan hasil yang berbeda tergantung pada tipologi adaptasi. Kerjasama dan komitmen yang kuat di antara pemangku kepentingan serta peningkatan kapasitas adaptasi masyarakat lokal adalah hal yang dibutuhkan.Kata kunci. Tindakan adaptasi, perubahan iklim, kota pesisir, SemarangAbstract. Indonesia is among the most vulnerable countries to climate change due to its coastlines, high concentration of population and economic activity in coastal areas. In addition, the impacts of climate change have had severe environmental and socio-economic consequences. Adaptation measures are required to minimize the impacts. Some climate change adaptation measures have been practiced in the coastal cities of Indonesia. This article aims to examine the current practices and performance of local adaptation measures in the coastal city of Semarang City. The current adaptation practices include an integration of climate resilience strategy into city planning and a physical adaptation strategy for the tidal flood hazard. It is found that the performance of each

  9. Non-Axisymmetric Disruption SOL Current Measurement In DIII-D Plasmas

    Science.gov (United States)

    Cabrera, Joshua; Hanson, J.; Navratil, G.; Bialek, J.

    2016-10-01

    J. Cabrera, J. Hanson, G. Navratil, J. Bialek, Columbia U-During tokamak disruptions known as vertical displacement events (VDEs) currents which flow between the plasma core and plasma facing components can reach nearly 20% of the total plasma current. These scrape off layer (SOL) currents are thought to affect the dynamics of plasma disruption. We have made use of an array of tile current monitors installed on the DIII-D tokamak to perform low toroidal mode number (n VDEs. In all cases examined (over 30 shots) currents exhibited toroidal asymmetry with toroidal peaking factor 2. Strong initial peaking in n=1 current measurements are correlated with n=1 magnetic fluctuations during VDEs. Following the peak SOL current and after observation of the final last closed flux surface (LCFS), n=1 mode activity 20% of n=0 peak amplitude persists for 10ms. Predictions from the VALEN-IVB simulation code utilizing current profile reconstructions from magnetic sensor array measurements will be compared with SOL current measurements. Possible effects of these SOL currents on plasma dynamics during disruption are considered. Supported by US DOE under DE-FC02-04ER54698 and DE-FG02-04ER54761.

  10. First Measurement of Charged Current Cross Sections at HERA with Longitudinally Polarised Positrons

    CERN Document Server

    Aktas, A; Anthonis, T; Antunovic, B; Aplin, S; Asmone, A; Astvatsatourov, A; Babaev, A; Backovic, S; Bähr, J; Baghdasaryan, A; Baranov, P; Barrelet, E; Bartel, Wulfrin; Baudrand, S; Baumgartner, S; Becker, J; Beckingham, M; Behnke, O; Behrendt, O; Belousov, A; Berger, C; Berger, N; Bizot, J C; Boenig, M O; Boudry, V; Bracinik, J; Brandt, G; Brisson, V; Bruncko, Dusan; Büsser, F W; Bunyatyan, A; Buschhorn, G; Bystritskaya, L; Campbell, A J; Cassol-Brunner, F; Cerny, K; Cerny, V; Chekelian, V; Contreras, J G; Coughlan, J A; Cox, B E; Cozzika, G; Cvach, J; Dainton, J B; Dau, W D; Daum, K; De Boer, Y; Delcourt, B; Del Degan, M; de Roeck, A; Desch, Klaus; De Wolf, E A; Diaconu, C; Dodonov, V; Dubak, A; Eckerlin, G; Efremenko, V; Egli, S; Eichler, R; Eisele, F; Elsen, E; Erdmann, W; Essenov, S; Falkewicz, A; Faulkner, P J W; Favart, L; Fedotov, A; Feltesse, J; Ferencei, J; Finke, L; Fleischer, M; Fleischmann, P; Flucke, G; Fomenko, A; Foresti, I; Franke, G; Frisson, T; Gabathuler, E; Garutti, E; Gayler, J; Gerlich, C; Ghazaryan, S; Ginzburgskaya, S; Glazov, A; Glushkov, I; Görlich, L; Goettlich, M; Gogitidze, N; Gorbounov, S; Goyon, C; Grab, C; Greenshaw, T; Gregori, M; Grell, B R; Grindhammer, G; Gwilliam, C; Haidt, D; Hajduk, L; Hansson, M; Heinzelmann, G; Henderson, R C W; Henschel, H; Herrera-Corral, G; Hildebrandt, M; Hiller, K H; Hoffmann, D; Horisberger, R P; Hovhannisyan, A; Hreus, T; Hussain, S; Ibbotson, M; Ismail, M; Jacquet, M; Janauschek, L; Janssen, X; Jemanov, V; Jönsson, L B; Johnson, D P; Jung, A W; Jung, H; Kapichine, M; Katzy, J; Kenyon, I R; Kiesling, C; Klein, M; Kleinwort, C; Klimkovich, T; Kluge, T; Knies, G; Knutsson, A; Korbel, V; Kostka, P; Krastev, K; Kretzschmar, J; Kropivnitskaya, A; Krüger, K; Kuckens, J; Landon, M P J; Lange, W; Lastoviicka, T; Lastoviicka-Medin, G; Laycock, P; Lebedev, A; Leibenguth, G; Lendermann, V; Levonian, S; Lindfeld, L; Lipka, K; Liptaj, A; List, B; List, J; Lobodzinska, E; Loktionova, N; López-Fernandez, R; Lubimov, V; Lucaci-Timoce, A I; Lüders, H; Lüke, D; Lux, T; Lytkin, L; Makankine, A; Malden, N; Malinovskii, E I; Mangano, S; Marage, P; Marshall, R; Martisikova, M; Martyn, H U; Maxfield, S J; Meer, D; Mehta, A; Meier, K; Meyer, A B; Meyer, H; Meyer, J; Michels, V; Mikocki, S; Milcewicz-Mika, I; Milstead, D; Mladenov, D; Mohamed, A; Moreau, F; Morozov, A; Morris, J V; Mozer, M U; Müller, K; Murn, P; Nankov, K; Naroska, Beate; Naumann, T; Newman, P R; Niebuhr, C; Nikiforov, A; Nowak, G; Nozicka, M; Oganezov, R; Olivier, B; Olsson, J E; Osman, S; Ozerov, D; Palichik, V; Panagoulias, I; Papadopoulou, T D; Pascaud, C; Patel, G D; Peng, H; Pérez, E; Perez-Astudillo, D; Perieanu, A; Petrukhin, A; Pitzl, D; Placakyte, R; Portheault, B; Povh, B; Prideaux, P; Rahmat, A J; Raicevic, N; Reisert, B; Reimer, P; Rimmer, A; Risler, C; Rizvi, E; Robmann, P; Roland, B; Roosen, R; Rostovtsev, A; Rurikova, Z; Rusakov, S; Salvaire, F; Sankey, D P C; Sauvan, E; Schatzel, S; Schmidt, S; Schmitt, S; Schmitz, C; Schoeffel, L; Schöning, A; Schultz-Coulon, H C; Sedlak, K; Sefkow, F; Shaw-West, R N; Shevyakov, I; Shtarkov, L N; Sloan, T; Smirnov, P; Soloviev, Yu; South, D; Spaskov, V; Specka, A; Steder, M; Stella, B; Stiewe, J; Strauch, I; Straumann, U; Sunar, D; Tchoulakov, V; Thompson, G; Thompson, P D; Tomasz, F; Traynor, D; Truöl, P; Tsakov, I; Tsipolitis, G; Tsurin, I; Turnau, J; Tzamariudaki, E; Urban, K; Urban, M; Usik, A; Utkin, D; Valkárová, A; Vallée, C; Van Mechelen, P; Vargas-Trevino, A; Vazdik, Ya A; Veelken, C; Vinokurova, S; Volchinski, V; Wacker, K; Wagner, J; Weber, G; Weber, R; Wegener, D; Werner, C; Wessels, M; Wessling, B; Wigmore, C; Wissing, C; Wolf, R; Wünsch, E; Xella, S M; Yan, W; Yeganov, V; Zaicek, J; Zaleisak, J; Zhang, Z; Zhelezov, A; Zhokin, A; Zhu, Y C; Zimmermann, J; Zimmermann, T; Zohrabyan, H; Zomer, F

    2006-01-01

    Data taken with positrons of different longitudinal polarisation states in collision with unpolarised protons at HERA are used to measure the total cross sections of the charged current process, e^+ p \\to \\bar{\

  11. EAST equilibrium current profile reconstruction using polarimeter-interferometer internal measurement constraints

    Science.gov (United States)

    Qian, J. P.; Lao, L. L.; Liu, H. Q.; Ding, W. X.; Zeng, L.; Luo, Z. P.; Ren, Q. L.; Huang, Y.; Huang, J.; Brower, D. L.; Hanada, K.; Chen, D. L.; Sun, Y. W.; Shen, B.; Gong, X. Z.; Xiao, B. J.; Wan, B. N.

    2017-03-01

    The first equilibrium reconstruction of EAST current-density profile based on internal Faraday rotation measurements provided by the POlarimeter-INTerferometer (POINT) diagnostic is demonstrated using the EFIT equilibrium reconstruction code. EFIT incorporates 11 simultaneous line-integrated density and Faraday effect measurements from POINT to self-consistently reconstruct the equilibrium toroidal current density profile using a Faraday rotation reconstruction algorithm. It is shown that the POINT measurements can be applied to improve the accuracy of core plasma current density and q profile on EAST. Comparisons of magnetic surfaces and the q profile reconstructed using external magnetic data against those using magnetic and POINT data are presented. Equilibrium reconstructions using POINT data are found to be consistent with sawtooth phenomena. The sensitivity of equilibrium reconstruction to POINT measurements indicates Faraday rotation provides important constraints for determining the current profile.

  12. WISM - A Wideband Instrument for Snow Measurement: Past Accomplishments, Current Status, and Path Forward

    Science.gov (United States)

    Bonds, Quenton; Racette, Paul; Durham, Tim (Principal Investigator)

    2016-01-01

    Presented are the prior accomplishments, current status and path forward for GSFC's Wideband Instrument for Snow Measurement (WISM). This work is a high level overview of the project, presented via Webinar to the IEEE young professionals.

  13. Extending the GMR Current Measurement Range with a Counteracting Magnetic Field

    OpenAIRE

    Tin Yan Poon; Ricky Wing Hong Lau; Norman Chung Fai Tse

    2013-01-01

    Traditionally, current transformers are often used for current measurement in low voltage (LV) electrical networks. They have a large physical size and are not designed for use with power electronic circuits. Semiconductor-based current sensing devices such as the Hall sensor and Giant Magnetoresistive (GMR) sensor are advantageous in terms of small size, high sensitivity, wide frequency range, low power consumption, and relatively low cost. Nevertheless, the operational characteristics of th...

  14. Deterministic and Stochastic Study of Wind Farm Harmonic Currents

    DEFF Research Database (Denmark)

    Sainz, Luis; Mesas, Juan Jose; Teodorescu, Remus;

    2010-01-01

    Wind farm harmonic emissions are a well-known power quality problem, but little data based on actual wind farm measurements are available in literature. In this paper, harmonic emissions of an 18 MW wind farm are investigated using extensive measurements, and the deterministic and stochastic...... characterization of wind farm harmonic currents is analyzed. Specific issues addressed in the paper include the harmonic variation with the wind farm operating point and the random characteristics of their magnitude and phase angle....

  15. Offshore Measurement System for Wave Power—Using Current Loop Feedback

    Directory of Open Access Journals (Sweden)

    Liselotte Ulvgård

    2016-12-01

    Full Text Available This paper presents the design and testing of a measurement system for wave power generators. The work is part of a project to build a robust and cheap measurement system for offshore monitoring of wave power farms. Due to the harsh offshore environment, low accessibility and high cost for installation and maintenance, it is of key importance to minimize power consumption, complexity and cost of each measurement unit. For the first prototype, the objective was to measure voltage, current and translator position inside the linear wave power generator. For this, two printed circuit boards (PCBs were developed, using a two wire current loop transmitter setup. They were tested separately and in a three phase setup inside a wave power generator during onshore tests. To ensure stability, speed and accuracy in the signal transfer, the PCBs were tested for linearity, frequency response and step response. In addition, power consumption was measured, for operational time evaluation. Results show good agreement between expected and measured performance, with an input range of ±1560 V and ±420 A for alternating current measurements and a bandwidth of 10 kHz and 7 kHz, for voltage and current measurements, respectively. The power consumption was measured to 0.5 W for each measurement unit, at 24 V feed.

  16. IR Camera Validation of IGBT Junction Temperature Measurement via Peak Gate Current

    DEFF Research Database (Denmark)

    Baker, Nick; Dupont, Laurent; Munk-Nielsen, Stig

    2017-01-01

    Infra-red measurements are used to assess the measurement accuracy of the Peak Gate Current (IGPeak) method for IGBT junction temperature measurement. Single IGBT chips with the gate pad in both the centre and the edge are investigated, along with paralleled chips, as well as chips suffering part...... between chips, the IGPeak method delivers a measurement based on the average temperature of the gate pads....

  17. Offshore Measurement System for Wave Power—Using Current Loop Feedback

    OpenAIRE

    Liselotte Ulvgård; Tobias Kamf; Mats Leijon

    2016-01-01

    This paper presents the design and testing of a measurement system for wave power generators. The work is part of a project to build a robust and cheap measurement system for offshore monitoring of wave power farms. Due to the harsh offshore environment, low accessibility and high cost for installation and maintenance, it is of key importance to minimize power consumption, complexity and cost of each measurement unit. For the first prototype, the objective was to measure voltage, current and ...

  18. MEASURING RESULTS NUMERAL TREATMENT OF IMPULSIVE CURRENTS BY MEANS OF ROGOVSKY BELT APPLICATION

    Directory of Open Access Journals (Sweden)

    U. Batygin

    2009-01-01

    Full Text Available The technique of numerical processing of measurement results of pulse currents by means of Rogovsky belt application is offered in the given work. It is shown that at measurement of signals by digital oscillographs and further numerical transformation of target signals, the possibilities of Rogovsky belt without the application of additional devices that in turn allows to define parameters of pulse currents with any peak-time characteristics essentially expand.

  19. Protons as the prime contributors to the storm time ring current. [measured from Explorer 45

    Science.gov (United States)

    Berko, F. W.; Cahill, L. J., Jr.; Fritz, T. A.

    1974-01-01

    Following a large magnetic storm (17 June 1972), Explorer 45 measured the equatorial particle populations and magnetic field. Using data obtained during the symmetic recovery phase, it is shown that through a series of self-consistent calculations, the measured protons with energies from 1 to 872 keV, can account for the observed ring current magnetic effects within experimental uncertainities. This enables an upper limit to be set for the heavy ion contribution to the storm time ring current.

  20. Current distribution measurements inside an electromagnetic plasma gun operated in a gas-puff mode

    OpenAIRE

    Poehlmann, Flavio R.; Cappelli, Mark A.; Rieker, Gregory B.

    2010-01-01

    Measurements are presented of the time-dependent current distribution inside a coaxial electromagnetic plasma gun. The measurements are carried out using an array of six axially distributed dual-Rogowski coils in a balanced circuit configuration. The radial current distributions indicate that operation in the gas-puff mode, i.e., the mode in which the electrode voltage is applied before injection of the gas, results in a stationary ionization front consistent with the presence of a plasma def...

  1. The differential Howland current source with high signal to noise ratio for bioimpedance measurement system

    Science.gov (United States)

    Liu, Jinzhen; Qiao, Xiaoyan; Wang, Mengjun; Zhang, Weibo; Li, Gang; Lin, Ling

    2014-05-01

    The stability and signal to noise ratio (SNR) of the current source circuit are the important factors contributing to enhance the accuracy and sensitivity in bioimpedance measurement system. In this paper we propose a new differential Howland topology current source and evaluate its output characters by simulation and actual measurement. The results include (1) the output current and impedance in high frequencies are stabilized after compensation methods. And the stability of output current in the differential current source circuit (DCSC) is 0.2%. (2) The output impedance of two current circuits below the frequency of 200 KHz is above 1 MΩ, and below 1 MHz the output impedance can arrive to 200 KΩ. Then in total the output impedance of the DCSC is higher than that of the Howland current source circuit (HCSC). (3) The SNR of the DCSC are 85.64 dB and 65 dB in the simulation and actual measurement with 10 KHz, which illustrates that the DCSC effectively eliminates the common mode interference. (4) The maximum load in the DCSC is twice as much as that of the HCSC. Lastly a two-dimensional phantom electrical impedance tomography is well reconstructed with the proposed HCSC. Therefore, the measured performance shows that the DCSC can significantly improve the output impedance, the stability, the maximum load, and the SNR of the measurement system.

  2. The differential Howland current source with high signal to noise ratio for bioimpedance measurement system

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jinzhen; Li, Gang; Lin, Ling, E-mail: linling@tju.edu.cn [State Key Laboratory of Precision Measurement Technology and Instruments, Tianjin University, Tianjin, People' s Republic of China, and Tianjin Key Laboratory of Biomedical Detecting Techniques and Instruments, Tianjin University, Tianjin (China); Qiao, Xiaoyan [College of Physics and Electronic Engineering, Shanxi University, Shanxi (China); Wang, Mengjun [School of Information Engineering, Hebei University of Technology, Tianjin (China); Zhang, Weibo [Institute of Acupuncture and Moxibustion China Academy of Chinese Medical Sciences, Beijing (China)

    2014-05-15

    The stability and signal to noise ratio (SNR) of the current source circuit are the important factors contributing to enhance the accuracy and sensitivity in bioimpedance measurement system. In this paper we propose a new differential Howland topology current source and evaluate its output characters by simulation and actual measurement. The results include (1) the output current and impedance in high frequencies are stabilized after compensation methods. And the stability of output current in the differential current source circuit (DCSC) is 0.2%. (2) The output impedance of two current circuits below the frequency of 200 KHz is above 1 MΩ, and below 1 MHz the output impedance can arrive to 200 KΩ. Then in total the output impedance of the DCSC is higher than that of the Howland current source circuit (HCSC). (3) The SNR of the DCSC are 85.64 dB and 65 dB in the simulation and actual measurement with 10 KHz, which illustrates that the DCSC effectively eliminates the common mode interference. (4) The maximum load in the DCSC is twice as much as that of the HCSC. Lastly a two-dimensional phantom electrical impedance tomography is well reconstructed with the proposed HCSC. Therefore, the measured performance shows that the DCSC can significantly improve the output impedance, the stability, the maximum load, and the SNR of the measurement system.

  3. The differential Howland current source with high signal to noise ratio for bioimpedance measurement system.

    Science.gov (United States)

    Liu, Jinzhen; Qiao, Xiaoyan; Wang, Mengjun; Zhang, Weibo; Li, Gang; Lin, Ling

    2014-05-01

    The stability and signal to noise ratio (SNR) of the current source circuit are the important factors contributing to enhance the accuracy and sensitivity in bioimpedance measurement system. In this paper we propose a new differential Howland topology current source and evaluate its output characters by simulation and actual measurement. The results include (1) the output current and impedance in high frequencies are stabilized after compensation methods. And the stability of output current in the differential current source circuit (DCSC) is 0.2%. (2) The output impedance of two current circuits below the frequency of 200 KHz is above 1 MΩ, and below 1 MHz the output impedance can arrive to 200 KΩ. Then in total the output impedance of the DCSC is higher than that of the Howland current source circuit (HCSC). (3) The SNR of the DCSC are 85.64 dB and 65 dB in the simulation and actual measurement with 10 KHz, which illustrates that the DCSC effectively eliminates the common mode interference. (4) The maximum load in the DCSC is twice as much as that of the HCSC. Lastly a two-dimensional phantom electrical impedance tomography is well reconstructed with the proposed HCSC. Therefore, the measured performance shows that the DCSC can significantly improve the output impedance, the stability, the maximum load, and the SNR of the measurement system.

  4. Dual-frequency ferromagnetic resonance to measure spin current coupling in multilayers

    Science.gov (United States)

    Adur, Rohan; Du, Chunhui; Wang, Hailong; Manuilov, Sergei A.; Yang, Fengyuan; Hammel, P. Chris

    2014-08-01

    Spin pumping is a method for injecting a pure spin current into a non-magnetic metal (NM) by inducing precession of a neighboring ferromagnet (FM) at its ferromagnetic resonance frequency. A popular method to detect spin current uses the Inverse Spin Hall Effect (ISHE) to convert the spin current to a detectable charge current and hence a voltage. In order to better understand the role of time independent and high frequency contributions to spin pumping, we sought to detect we attempt to detect spin currents by using a second microwave frequency to detect changes in linewidth of a second ferromagnet due to the spin-torque induced by the spin current from the first ferromagnet. This dual resonance is achieved by pairing a custom broadband coplanar transmission line with the high-Q resonant cavity of a commercial electron paramagnetic resonance spectrometer. This technique is general enough that it should enable the investigation of spin currents in any FM-NM-FM system, for any orientation of external field, and is not sensitive to voltage artifacts often found in ISHE measurements. We find that the condition for simultaneous resonance generates a dc spin current that is too small to produce a measurable change in linewidth of the second ferromagnet, confirming the dominance of ac spin currents in linewidth enhancement measurements.

  5. Patient reported outcomes measures in neurogenic bladder and bowel: A systematic review of the current literature.

    Science.gov (United States)

    Patel, Darshan P; Elliott, Sean P; Stoffel, John T; Brant, William O; Hotaling, James M; Myers, Jeremy B

    2016-01-01

    To describe existing bladder and bowel specific quality of life (QoL) measurement tools, QoL in patients with multiple sclerosis (MS), spinal cord injury (SCI), Parkinson's Disease (PD), stroke, or spina bifida (SB) affected by bladder or bowel dysfunction, and the impact of specific bladder and bowel management on QoL. We performed a systematic review in PubMed/Medline databases in accordance with the PRISMA statement for English publications between January 1, 2000 and January 1, 2014. Articles were first screened based on their abstract and select full-text articles were then reviewed for eligibility. Articles with no QoL or PROM assessing urinary or bowel dysfunction were excluded. Risk of bias assessment included randomization, incomplete outcomes data, selective outcomes reporting, and other biases. All articles were graded using the Grading of Recommendations, Assessment, Development, and Evaluation (GRADE) system as per the Cochrane Handbook for Systematic Reviews of Interventions. The most common QoL measurement tool for urinary and bowel dysfunction was the Medical Outcomes Study SF-36. Twelve (24%) studies used only non-validated QoL questionnaires. Only three urinary or bowel specific QoL measures were found: the Qualiveen questionnaire, the FICQoL, and the QoL-BM. Several studies identified instances were clinical and patient-reported outcomes were inconsistent particularly with indwelling urinary catheter usage and reconstructive surgery. Additionally, certain clinical outcomes surrogates commonly used as primary outcomes measures may not correlate with the patient reported outcomes (PRO). Current PRO measures (PROM) and QoL assessments are heterogeneous and several inconsistencies in clinical and PRO for various management options exist. Standardized PROM will help identify optimal bladder and bowel management for patients with neurologic conditions. © 2014 Wiley Periodicals, Inc.

  6. Low-noise pulsed current source for magnetic-field measurements of magnets for accelerators

    Science.gov (United States)

    Omelyanenko, M. M.; Borisov, V. V.; Donyagin, A. M.; Khodzhibagiyan, H. G.; Kostromin, S. A.; Makarov, A. A.; Shemchuk, A. V.

    2017-01-01

    The schematic diagram, design, and technical characteristics of the pulsed current source developed and produced for the magnetic-field measurement system of superconducting magnets for accelerators are described. The current source is based on the current regulator with pass transistor bank in the linear mode. Output current pulses (0-100 A) are produced by utilizing the energy of the preliminarily charged capacitor bank (5-40 V), which is additionally charged between pulses. The output current does not have the mains frequency and harmonics ripple. The relative noise level is less than-100 dB (or 10-5) of RMS value (it is defined as the ratio of output RMS noise current to a maximal output current of 100 A within the operating bandwidth, expressed in dB). The work was performed at the Veksler and Baldin Laboratory of High Energy Physics, Joint Institute for Nuclear Research (JINR).

  7. An Ad-hoc Satellite Network to Measure Filamentary Current Structures in the Auroral Zone

    Science.gov (United States)

    Nabong, C.; Fritz, T. A.; Semeter, J. L.

    2014-12-01

    An ad-hoc cubesat-based satellite network project known as ANDESITE is under development at Boston University. It aims to develop a dense constellation of easy-to-use, rapidly-deployable low-cost wireless sensor nodes in space. The objectives of the project are threefold: 1) Demonstrate viability of satellite based sensor networks by deploying an 8-node miniature sensor network to study the filamentation of the field aligned currents in the auroral zones of the Earth's magnetosphere. 2) Test the scalability of proposed protocols, including localization techniques, tracking, data aggregation, and routing, for a 3 dimensional wireless sensor network using a "flock" of nodes. 3) Construct a 6U Cube-sat running the Android OS as an integrated constellation manager, data mule and sensor node deplorer. This small network of sensor nodes will resolve current densities at different spatial resolutions in the near-Earth magnetosphere using measurements from magnetometers with 1-nT sensitivities and 0.2 nT/√Hz self-noise. Mapping of these currents will provide new constraints for models of auroral particle acceleration, wave-particle interactions, ionospheric destabilization, and other kinetic processes operating in the low-beta plasma of the near Earth magnetosphere.

  8. Measurement of Drug Craving in Persian Speaking Subjects; a Review on Current Experiences and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Masoomeh Maarefvand

    2012-09-01

    Full Text Available Background: Drug craving is considered as one of the main cores of drug dependency and addiction. Multidimensionality of drug craving, its cultural-bounded features and its intra individual rapidly changing nature makes it difficult to be measured. Nowadays, regarding different psychometric approaches, there are various instruments available for measurement of different aspects of drug craving but mainly for Latin-based languages in North America and European countries. High prevalence and special conditions, and unique subcultures in substance abuse and addiction in many countries, like Iran, make the design of culturally validated instruments for drug craving assessment priority. Materials and Methods: Comprehensive review on drug craving measurement instruments for Persian speaking subjects have been performed by searching in databases (ELSEVIER, Science Direct and Scientific Information Database (SID and investigating of related documents on regional experiences. Results: In this article seven main categories of drug craving instruments have been reviewed focusing on validated versions in Persian language including: self-reports, reinforcement “proxies”, drug self administration, psycho physiological responding, neurobiological responding, cognitive processing and expressive methods. Conclusion: Reviewing on weak and strength points of each instrument group and national and regional experiences shows that designing and validating a new series of ecologically-validated instruments for multidimensional measurement of drug craving in different addiction subcultures should be prioritized to cover current methodological gaps in substance abuse studies in Iran.

  9. RF leakage current in electrosurgical units: Influence of the layout in taking measurements

    Science.gov (United States)

    Gentile, L.; Palacios, P.

    2007-11-01

    The RF leakage current in electrosurgical units is a critical parameter to measure, because it may cause accidental burns in patients. The particular standard for electrosurgical units IEC 60601-2-2 indicates the maximum RF leakage levels and defines the elements and their layout to do these measurements. On this paper we show the RF leakage current values of 6 electrosurgical units. We did these measurements in two different ways: in the first one we measured in normal conditions of use in the operating rooms and in the second we followed the mentioned Standard. The results shows differences between one group and the other, observing higher RF leakage current values in the measurements that we did without following the standard's layout.

  10. RF leakage current in electrosurgical units: Influence of the layout in taking measurements

    Energy Technology Data Exchange (ETDEWEB)

    Gentile, L; Palacios, P [Cardiology and Cardiovascular Surgery Institute, Favaloro Foundation Biomedical Engineering Department, Av. Belgrano 1746. Bs. As. (Argentina)

    2007-11-15

    The RF leakage current in electrosurgical units is a critical parameter to measure, because it may cause accidental burns in patients. The particular standard for electrosurgical units IEC 60601-2-2 indicates the maximum RF leakage levels and defines the elements and their layout to do these measurements. On this paper we show the RF leakage current values of 6 electrosurgical units. We did these measurements in two different ways: in the first one we measured in normal conditions of use in the operating rooms and in the second we followed the mentioned Standard. The results shows differences between one group and the other, observing higher RF leakage current values in the measurements that we did without following the standard's layout.

  11. Measurement of ion velocity profiles in a magnetic reconnection layer via current sheet jogging

    Science.gov (United States)

    Stein, G.; Yoo, J.; Yamada, M.; Ji, H.; Dorfman, S.; Lawrence, E.; Myers, C.; Tharp, T.

    2011-10-01

    In many laboratory plasmas, constructing stationary Langmuir and Mach probe arrays with resolution on the order of electron skin depth is technically difficult, and can introduce significant plasma perturbations. However, complete two- dimensional profiles of plasma density, electron temperature, and ion flow are important for studying the transfer of energy from magnetic fields to particles during magnetic reconnection. Through the use of extra ``Shaping Field'' coils in the Magnetic Reconnection Experiment (MRX) at the Princeton Plasma Physics Laboratory, the inward motion of the current sheet in the reconnection layer can be accelerated, or ``jogged,'' allowing the measurement of different points across the sheet with stationary probes. By acquiring data from Langmuir probes and Mach probes at different locations in the MRX with respect to the current sheet center, profiles of electron density and temperature and a vector plot of two-dimensional ion velocity in the plane of reconnection are created. Results from probe measurements will be presented and compared to profiles generated from computer simulation.

  12. Measurements of the transverse resistance and eddy current losses in a cable-in-conduit conductor

    Science.gov (United States)

    Keilin, V. E.; Kovalev, I. A.; Kruglov, S. L.; Lelekhov, S. A.; Il'in, A. A.; Naumov, A. V.; Shcherbakov, V. I.; Shutov, K. A.

    2015-11-01

    In the case of plasma current interruption in tokamaks, the conductor of toroidial field (TF) coils experiences the action of a pulsed decreasing magnetic field (PDMF) parallel to the conductor's axis. To estimate the stability of a cable-in-conduit conductor against the PDMF, a new experimental method to study different types of losses is applied. This method exploits a high sensitivity of temperature and gas pressure to input energy in a closed volume. It allows one to measure hysteresis losses with a rather high accuracy (provided that the rate of change of the PDMF is low) and a sum of hysteresis losses and eddy current losses (when the rate of change of the PDMF is high). An experimental setup to measure the transverse (circumferential) resistance and losses has been developed at the National Research Centre Kurchatov Institute. A Russianmade Nb3Sn conductor intended for the TF coils of the International Thermonuclear Experimental Reactor is subjected to a PDMF with different amplitudes and characteristic times. The electromagnetic time constant and the transverse resistivity of the conductor are experimentally determined. The maximum temperature of strands under the action of the PDMF is calculated.

  13. PDF sensitivity studies from ATLAS measurements

    CERN Document Server

    Hanna, Remie; The ATLAS collaboration

    2015-01-01

    Several measurements performed by the ATLAS collaboration are either useful to constrain the proton structure or are affected by its associated uncertainties. The strange-quark density is rather poorly known at low x. Measurements of the W+c production and the inclusive W and Z differential cross sections are found to constrain the strange-quark density. Drell-Yan cross section measurements performed above and below the Z peak region have a different sensitivity to parton flavour, parton momentum fraction x and scale Q compared to measurements on the Z peak and can also be used to constrain the photon content of the proton. Measurements of the inclusive jet and photon cross sections are standard candles and can be useful to constrain the medium and high x gluon densities. Precision electroweak studies performed by ATLAS can be limited by the current knowledge on the proton structure. Among those are the measurement of the effective weak mixing angle and the mass of the W boson. Dedicated PDF studies were perf...

  14. Study on UPF Harmonic Current Detection Method Based on DSP

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, H J [Northwestern Polytechnical University, Xi' an 710072 (China); Pang, Y F [Xi' an University of Technology, Xi' an 710048 (China); Qiu, Z M [Xi' an University of Technology, Xi' an 710048 (China); Chen, M [Northwestern Polytechnical University, Xi' an 710072 (China)

    2006-10-15

    Unity power factor (UPF) harmonic current detection method applied to active power filter (APF) is presented in this paper. The intention of this method is to make nonlinear loads and active power filter in parallel to be an equivalent resistance. So after compensation, source current is sinusoidal, and has the same shape of source voltage. Meanwhile, there is no harmonic in source current, and the power factor becomes one. The mathematic model of proposed method and the optimum project for equivalent low pass filter in measurement are presented. Finally, the proposed detection method applied to a shunt active power filter experimental prototype based on DSP TMS320F2812 is developed. Simulation and experiment results indicate the method is simple and easy to implement, and can obtain the real-time calculation of harmonic current exactly.

  15. Prospect for Charge Current Neutrino Interactions Measurements at the CERN-PS

    CERN Document Server

    Bernardini, P; Bozza, C; Brugnera, R; Cecchetti, A; Cecchini, S; Collazuol, G; Corso, F Dal; De Mitri, I; De Serio, M; Di Ferdinando, D; Dore, U; Dusini, S; Fabbricatore, P; Fanin, C; Fini, R A; Garfagnini, A; Grella, G; Kose, U; Laveder, M; Loverre, P; Longhin, A; Marsella, G; Mancarella, G; Mandrioli, G; Mauri, N; Medinaceli, E; Mezzetto, M; Muciaccia, M T; Orecchini, D; Paoloni, A; Pastore, A; Patrizii, L; Pozzato, M; Rescigno, R; Rosa, G; Simone, S; Sioli, M; Sirri, G; Spurio, M; Stanco, L; Stellacci, S; Surdo, A; Tenti, M; Togo, V

    2011-01-01

    Tensions in several phenomenological models grew with experimental results on neutrino/antineutrino oscillations at Short-Baseline (SBL) and with the recent, carefully recomputed, antineutrino fluxes from nuclear reactors. At a refurbished SBL CERN-PS facility an experiment aimed to address the open issues has been proposed [1], based on the technology of imaging in ultra-pure cryogenic Liquid Argon (LAr). Motivated by this scenario a detailed study of the physics case was performed. We tackled specific physics models and we optimized the neutrino beam through a full simulation. Experimental aspects not fully covered by the LAr detection, i.e. the measurements of the lepton charge on event-by-event basis and their energy over a wide range, were also investigated. Indeed the muon leptons from Charged Current (CC) (anti-)neutrino interactions play an important role in disentangling different phenomenological scenarios provided their charge state is determined. Also, the study of muon appearance/disappearance ca...

  16. Prospect for Charge Current Neutrino Interactions Measurements at the CERN-PS

    CERN Document Server

    Stanco, Luca (INFN-Padova)

    2011-01-01

    Tensions in several phenomenological models grew with experimental results on neu- trino/antineutrino oscillations at Short-Baseline (SBL) and with the recent, carefully recomputed, antineutrino fluxes from nuclear reactors. At a refurbished SBL CERN- PS facility an experiment aimed to address the open issues has been proposed [1], based on the technology of imaging in ultra-pure cryogenic Liquid Argon (LAr). Motivated by this scenario a detailed study of the physics case was performed. We tackled specific physics models and we optimized the neutrino beam through a full simulation. Experimental aspects not fully covered by the LAr detection, i.e. the measurements of the lepton charge on event-by-event basis and their energy over a wide range, were also investigated. Indeed the muon leptons from Charged Current (CC) (anti-)neutrino interactions play an important role in disentangling different phenomenological scenarios provided their charge state is determined. Also, the study of muon appearance/disappearance...

  17. Theory and signal processing of acoustic correlation techniques for current velocity measurement

    Institute of Scientific and Technical Information of China (English)

    ZHU Weiqing; FENG Lei; WANG Changhong; WANG Yuling; QIU Wei

    2008-01-01

    A theoretical model and signal processing of acoustic correlation measurements to estimate current velocity are discussed. The sonar space-time correlation function of vol-ume reverberations within Fraunhofer zone is derived. The function, which is in exponential forms, is the theoretical model of acoustic correlation measurements. The characteristics of the correlation values around the maximum of the amplitude of the correlation function, where most information about current velocity is contained, are primarily analyzed. Localized Least Mean Squares (LLMS) criterion is put forward for velocity estimation. Sequential Quadratic Programming (SQP) method is adopted as the optimization method. So the systematic sig-nal processing method of acoustic correlation techniques for current velocity measurement is established. A prototype acoustic correlation current profiler (ACCP) underwent several sea trials, the results show that theoretical model approximately coincides with experimental re-sults. Current profiles including the speed and direction from ACCP are compared with those from acoustic Doppler current profiler (ADCP). The current profiles by both instruments agree reasonably well. Also, the standard deviation of velocity measurement by ACCP is statistically calculated and it is a little larger than predicted value.

  18. Note: Development of 9 A current source for precise resistance measurement method.

    Science.gov (United States)

    Štambuk, Igor; Malarić, Roman

    2012-10-01

    In this Note, design of voltage controlled current source intended to be used in precise resistance measurement system in the range from 0.1 mΩ to 10 Ω is presented. The design specifications of current source include gross-tuning of current in the range from 0.1 mA to 9 A, low noise, low temperature coefficient, and short term stability better than 50 ppm. The realized current source has achieved better short term stability than comparable commercial devices.

  19. Solar cycle in current reanalyses: (nonlinear attribution study

    Directory of Open Access Journals (Sweden)

    A. Kuchar

    2014-12-01

    Full Text Available This study focusses on the variability of temperature, ozone and circulation characteristics in the stratosphere and lower mesosphere with regard to the influence of the 11 year solar cycle. It is based on attribution analysis using multiple nonlinear techniques (Support Vector Regression, Neural Networks besides the traditional linear approach. The analysis was applied to several current reanalysis datasets for the 1979–2013 period, including MERRA, ERA-Interim and JRA-55, with the aim to compare how this type of data resolves especially the double-peaked solar response in temperature and ozone variables and the consequent changes induced by these anomalies. Equatorial temperature signals in the lower and upper stratosphere were found to be sufficiently robust and in qualitative agreement with previous observational studies. The analysis also pointed to the solar signal in the ozone datasets (i.e. MERRA and ERA-Interim not being consistent with the observed double-peaked ozone anomaly extracted from satellite measurements. Consequently the results obtained by linear regression were confirmed by the nonlinear approach through all datasets, suggesting that linear regression is a relevant tool to sufficiently resolve the solar signal in the middle atmosphere. Furthermore, the seasonal dependence of the solar response was also discussed, mainly as a source of dynamical causalities in the wave propagation characteristics in the zonal wind and the induced meridional circulation in the winter hemispheres. The hypothetical mechanism of a weaker Brewer Dobson circulation was reviewed together with discussion of polar vortex stability.

  20. Solar cycle in current reanalyses: (non)linear attribution study

    Science.gov (United States)

    Kuchar, A.; Sacha, P.; Miksovsky, J.; Pisoft, P.

    2014-12-01

    This study focusses on the variability of temperature, ozone and circulation characteristics in the stratosphere and lower mesosphere with regard to the influence of the 11 year solar cycle. It is based on attribution analysis using multiple nonlinear techniques (Support Vector Regression, Neural Networks) besides the traditional linear approach. The analysis was applied to several current reanalysis datasets for the 1979-2013 period, including MERRA, ERA-Interim and JRA-55, with the aim to compare how this type of data resolves especially the double-peaked solar response in temperature and ozone variables and the consequent changes induced by these anomalies. Equatorial temperature signals in the lower and upper stratosphere were found to be sufficiently robust and in qualitative agreement with previous observational studies. The analysis also pointed to the solar signal in the ozone datasets (i.e. MERRA and ERA-Interim) not being consistent with the observed double-peaked ozone anomaly extracted from satellite measurements. Consequently the results obtained by linear regression were confirmed by the nonlinear approach through all datasets, suggesting that linear regression is a relevant tool to sufficiently resolve the solar signal in the middle atmosphere. Furthermore, the seasonal dependence of the solar response was also discussed, mainly as a source of dynamical causalities in the wave propagation characteristics in the zonal wind and the induced meridional circulation in the winter hemispheres. The hypothetical mechanism of a weaker Brewer Dobson circulation was reviewed together with discussion of polar vortex stability.

  1. Instrumentation for Gate Current Noise Measurements on sub-100 nm MOS Transistors

    CERN Document Server

    Gaioni, L; Ratti, L; Re, V; Speziali, V; Traversi, G

    2008-01-01

    This work describes a measuring system that was developed to characterize the gate current noise performances of CMOS devices with minimum feature size in the 100 nm span. These devices play an essential role in the design of present daymixedsignal integrated circuits, because of the advantages associated with the scaling process. The reduction in the gate oxide thickness brought about by CMOS technology downscaling leads to a non-negligible gate current due to direct tunneling phenomena; this current represents a noise source which requires an accurate characterization for optimum analog design. In this paper, two instruments able to perform measurements in two different ranges of gate current values will be discussed. Some of the results of gate current noise characterization will also be presented.

  2. Measurement of toroidal vessel eddy current during plasma disruption on J-TEXT

    Energy Technology Data Exchange (ETDEWEB)

    Liu, L. J.; Yu, K. X.; Zhang, M., E-mail: zhangming@hust.edu.cn; Zhuang, G.; Li, X.; Yuan, T.; Rao, B.; Zhao, Q. [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2016-01-15

    In this paper, we have employed a thin, printed circuit board eddy current array in order to determine the radial distribution of the azimuthal component of the eddy current density at the surface of a steel plate. The eddy current in the steel plate can be calculated by analytical methods under the simplifying assumptions that the steel plate is infinitely large and the exciting current is of uniform distribution. The measurement on the steel plate shows that this method has high spatial resolution. Then, we extended this methodology to a toroidal geometry with the objective of determining the poloidal distribution of the toroidal component of the eddy current density associated with plasma disruption in a fusion reactor called J-TEXT. The preliminary measured result is consistent with the analysis and calculation results on the J-TEXT vacuum vessel.

  3. Diamagnetic measurements based on the compensation of TF current diffusion in J-TEXT

    Science.gov (United States)

    Zhu, L. Z.; Chen, Z. P.; Li, F. M.; Liu, H.; Chen, Z. Y.; Zhuang, G.

    2016-11-01

    Due to the existence both of toroidal ripples and toroidal field (TF) current diffusion, the toroidal flux changes with time when the TF current is at the flat-top. A diamagnetic measurement based on the compensation of TF current diffusion has been built in J-TEXT to solve this problem. The measurement system includes a double-loop installed in the vacuum vessel and an array of small printed circuit board (PCB) magnetic probes placed on the mid-plane of one TF coil. A model was proposed to analyze and compensate the effect of TF current diffusion. Experiment results show that the residual flux is about 1 × 10-4 Wb after the compensation and it can meet the need of diamagnetic measurement in J-TEXT.

  4. Upward electron beams measured by DE-1 - A primary source of dayside region-1 Birkeland currents

    Science.gov (United States)

    Burch, J. L.; Reiff, P. H.; Sugiura, M.

    1983-01-01

    Measurements made by the High Altitude Plasma Instrument on DE-1 have shown that intense upward electron beams with energies from about 20 eV to about 200 eV are a common feature of the region just equatorward of the morning-side polar cusp. Computations of the currents carried by these beams and by the precipitating cusp electrons show excellent agreement with the simultaneous DE-1 magnetometer measurements for both upward and downward Birkeland currents. The data indicate that cold ionospheric electrons, which carry the downward region-1 Birkeland currents on the morning side, are accelerated upward by potential drops of a few tens of eV at altitudes of several thousand kilometers. This acceleration process allows spacecraft above those altitudes to measure routinely the charge carriers of both downward and upward current systems.

  5. Electrokinetics of diffuse soft interfaces. IV. Analysis of streaming current measurements at thermoresponsive thin films.

    Science.gov (United States)

    Duval, Jérôme F L; Zimmermann, Ralf; Cordeiro, Ana L; Rein, Nelly; Werner, Carsten

    2009-09-15

    Streaming current measurements were performed on poly(N-isopropylacrylamide)-co-N-(1-phenylethyl) acrylamide [P(NIPAAm-co-PEAAm)] thermoresponsive thin films above and below the transition temperature of the polymer (i.e., at 22 and 4 degrees C, respectively). Electrokinetic measurements (ionic strength 0.01-10 mM KCl, pH 2.5-9.5 in 1 mM KCl) revealed that the charging of the polymer/aqueous solution interface is determined by unsymmetrical adsorption of hydroxide and hydronium ions onto the Teflon AF substrate that supports the hydrogel film. The magnitude of the streaming current significantly decreased with decreasing temperature, that is, when the hydrogel was swelling. The pH- and ionic strength-dependent data for unswollen and swollen films were interpreted on the basis of the here-reported general theory for the electrokinetics of diffuse soft gel layers. The formalism based on the Debye-Brinkman equation for hydrodynamics and the nonlinear Poisson-Boltzmann equation for electrostatics extends previous theoretical studies by considering the most general situation of a charged gel layer supported by a charged rigid surface. Full analytical expression is provided for the streaming current in the limit of homogeneous distribution of segments under low potential conditions. Numerical analysis of the governing transport and electrostatic equations allows for the computation of streaming current for cases where analytical developments are not possible. The theory successfully reproduces the electrokinetic data for the P(NIPAAm-co-PEAAm) copolymer film at 22 and 4 degrees C over the whole range of pH and ionic strength examined. It is found that the 3-fold increase of the hydrogel film thickness with decreasing temperature from 22 to 4 degrees C (i.e., from 23 to 70 nm as measured by ellipsometry), is in line with homogeneous swelling and an increase of the hydrodynamic penetration length (1/lambdao) by a factor of approximately 1.6. Additionally, the hydrodynamic

  6. The PPTN-02 new-generation current-voltage transducers for measuring of photosignals

    Directory of Open Access Journals (Sweden)

    Butenko V. K.

    2008-02-01

    Full Text Available The measurement results of technical characteristics of new-generation current-voltage transducers which have low input resistance (<10 Оhm and providing ptotodiodes photocurrent measurement from 1·10-12 to 1·10-3 A are presented.

  7. Design and construction of a Faraday cup for measurement of small electronic currents

    Science.gov (United States)

    Veyssiere, A.

    1985-01-01

    The design of a device to measure and integrate very small currents generated by the impact of a charged particle beam upon a Faraday cut is described. The main component is a graphite block capable of stopping practically all the incident changes. The associated electronic apparatus required to measure better than 10/13 ampere with a precision of 10/0 is described.

  8. Particle image velocimetry measurements and numerical modeling of a saline density current

    CSIR Research Space (South Africa)

    Gerber, G

    2011-03-01

    Full Text Available Particle image velocimetry scalar measurements were carried out on the body of a stably stratified density current with an inlet Reynolds number of 2,300 and bulk Richardson number of 0.1. These measurements allowed the mass and momentum transport...

  9. Measuring Physical Inactivity: Do Current Measures Provide an Accurate View of “Sedentary” Video Game Time?

    Directory of Open Access Journals (Sweden)

    Simon Fullerton

    2014-01-01

    Full Text Available Background. Measures of screen time are often used to assess sedentary behaviour. Participation in activity-based video games (exergames can contribute to estimates of screen time, as current practices of measuring it do not consider the growing evidence that playing exergames can provide light to moderate levels of physical activity. This study aimed to determine what proportion of time spent playing video games was actually spent playing exergames. Methods. Data were collected via a cross-sectional telephone survey in South Australia. Participants aged 18 years and above (n=2026 were asked about their video game habits, as well as demographic and socioeconomic factors. In cases where children were in the household, the video game habits of a randomly selected child were also questioned. Results. Overall, 31.3% of adults and 79.9% of children spend at least some time playing video games. Of these, 24.1% of adults and 42.1% of children play exergames, with these types of games accounting for a third of all time that adults spend playing video games and nearly 20% of children’s video game time. Conclusions. A substantial proportion of time that would usually be classified as “sedentary” may actually be spent participating in light to moderate physical activity.

  10. Automated measurement system employing eddy currents to adjust probe position and determine metal hardness

    Science.gov (United States)

    Prince, James M.; Dodson, Michael G.; Lechelt, Wayne M.

    1989-01-01

    A system for measuring the hardness of cartridge cases employs an eddy current probe for inducing and sensing eddy currents in each cartridge case. A first component of the sensed signal is utilized in a closed loop system for accurately positioning the probe relative to the cartridge case both in the lift off direction and in the tangential direction, and a second component of the sensed signal is employed as a measure of the hardness. The positioning and measurement are carried out under closed loop microprocessor control facilitating hardness testing on a production line basis.

  11. A Leakage Current-based Measurement of the Radiation Damage in the ATLAS Pixel Detector

    CERN Document Server

    Gorelov, Igor; The ATLAS collaboration

    2015-01-01

    A measurement has been made of the radiation damage incurred by the ATLAS Pixel Detector barrel silicon modules from the beginning of operations through the end of 2012. This translates to hadronic fluence received over the full period of operation at energies up to and including 8 TeV. The measurement is based on a per-module measurement of the silicon sensor leakage current. The results are presented as a function of integrated luminosity and compared to predictions by the Hamburg Model. This information can be used to predict limits on the lifetime of the Pixel Detector due to current, for various operating scenarios.

  12. Comparison between morphometric measurements os current herd Mangalarga Marchador males and breed champions

    Directory of Open Access Journals (Sweden)

    Juliano Martins Santiago

    2013-01-01

    Full Text Available Equines morphometric analysis is an important method of selection related to functionality of the species. Mangalarga Marchador is the most important horse Brazilian breed and its evolution can be observed in specialized exhibition where owners expase their herd with the breed exponents, adopting them as selection parameters. In this context the study aimed to compare the morphometric measures of Mangalarga Marchador males herd with the champions of breed, using as parameters breed standards and Eclectic System of Proportions for saddle horse. Experimental design was completely randomized and treatments were the Mangalarga Marchador male herd, represented by all horses registered from 2000 to 2012, wich had measurements stored in Associação Brasileira de Criadores do Cavalo Mangalarga Marchador (ABCCMM service studbook database, totaling 15,482 animals, and the champions of breed, represented by 222 horses champions who participated of the 29th, 30th or 31th Exposição Nacional do Cavalo Mangalarga Marchador. Variables evaluated were height at withers and at rump, length of the head, neck, dorse, rump, shoulder and body, width of head and of rump, thoracic perimeter and cannon perimeter. Average linear measurements were related to length of head, according to Eclectic System of Proportions for saddle horse. Results were submitted to variance analysis and averages were compared by Fisher test (p<0.05. Regarding the current herd of males Mangalarga Marchador, the champions of the race showed greater length of neck, dorse, rump and body, height at withers and at rump, width of rump, cannon perimeter and shorter length of the shoulder. It was concluded that although larger, the champions horses Mangalarga Marchador are proportionally similar to current herd. Mangalarga Marchador horses have not yet reached the height considered ideal by breed standard and their proportions are different from those recommended by Eclectic System of Proportions for

  13. 脉冲涡流测厚技术%Thickness Measurement Technique by Pulsed Eddy Current

    Institute of Scientific and Technical Information of China (English)

    吴鑫; 李方奇; 石坤; 谢基龙; 李浩

    2009-01-01

    脉冲涡流检测技术具有频谱宽、信号穿透能力强以及精确度好等优点.对脉冲涡流测厚技术进行了仿真,即针对脉冲涡流测厚系统,建立了有限元分析模型,仿真分析了检测线圈上的电压的衰减规律,得到了检测线圈上的电压随被测体厚度的变化规律,确定了两者之间的定量关系.分析了提离距离、检测线圈参数和脉冲涡流频率对检测结果的影响.该研究为将来进行脉冲涡流测厚仪的研制提供了理论依据和数学模型.%Pulsed eddy current technique had quite a few advantages such as wide spectrum, strong penetration,high accuracy. The experiment was carried out to study the metal thickness measurement of PEC, and a finite element model for the system of the metal thickness measurement of PEC was established. Based on the finite element model established, this thesis analyzed the attenuation law of the voltage in receiving coil By changing the thickness of tested bodies, the relationship between the voltage of receiving coil and the thickness of the testedbodies was analyzed, and also the factors that affected the measuring results such as lift-off distance, parameters of testing coil and frequency of pulsed eddy current were analyzed in detail It provided a theoretical basis and mathematical models for the future development of the PEC gage.

  14. Measurement of the muon-neutrino charged-current cross section on water with zero pions

    CERN Document Server

    Yuan, Tianlu

    2016-01-01

    The Tokai to Kamioka (T2K) experiment is a 295-km long-baseline neutrino experiment aimed towards the measurement of neutrino oscillation parameters ${\\theta}_{13}$ and ${\\theta}_{23}$. Precise measurement of these parameters requires accurate knowledge of neutrino cross sections. We present a flux-averaged double differential measurement of the charged-current cross section on water with zero pions in the final state using the T2K off-axis near detector, ND280. A selection of $\

  15. Current situation of the study on Kaiser effect of rock acoustic emission in in-situ stress measurement%声发射Kaiser效应在地应力测量中的应用现状

    Institute of Scientific and Technical Information of China (English)

    李利峰; 邹正盛; 张庆

    2011-01-01

    Based on periodical literature, the statistics of papers on accoustic emission since recent twenty years were made. The principle and mechanism of acoustic emission, space positioning for the samples were presented.With the theory of elastic mechanics, six direction and four direction methods in space for in-sim measurement using the rock acoustic emission were derived. There are two sampling methods according to the different methods.Influence factors of acoustic emission in in-sim stress measurement, determining method of Kaiser Point and treatment technique for signal and noise were systematically expounded. Two methods which are different from the traditional in-situ measurement are introduced. Problems and research trend of the in-situ stress measurement using acoustic emission were analyzed.%对近20年来岩石声发射测量地应力的研究现状进行了分析,介绍了声发射的原理和机理及试样的空间定位方法.利用弹性力学原理推导了声发射方法测定地应力的空间6向和4向的计算过程,对应有两种常用的取样方式.系统地阐述了影响声发射地应力测量的因素、Kaiser点的确定方法以及信噪处理技术,简单介绍了不同于传统利用声发射测量地应力的另外两种方法.对声发射测量地应力中存在的问题和研究趋势进行了分析.

  16. Conductive shield for ultra-low-field magnetic resonance imaging: Theory and measurements of eddy currents

    Science.gov (United States)

    Zevenhoven, Koos C. J.; Busch, Sarah; Hatridge, Michael; Öisjöen, Fredrik; Ilmoniemi, Risto J.; Clarke, John

    2014-03-01

    Eddy currents induced by applied magnetic-field pulses have been a common issue in ultra-low-field magnetic resonance imaging. In particular, a relatively large prepolarizing field—applied before each signal acquisition sequence to increase the signal—induces currents in the walls of the surrounding conductive shielded room. The magnetic-field transient generated by the eddy currents may cause severe image distortions and signal loss, especially with the large prepolarizing coils designed for in vivo imaging. We derive a theory of eddy currents in thin conducting structures and enclosures to provide intuitive understanding and efficient computations. We present detailed measurements of the eddy-current patterns and their time evolution in a previous-generation shielded room. The analysis led to the design and construction of a new shielded room with symmetrically placed 1.6-mm-thick aluminum sheets that were weakly coupled electrically. The currents flowing around the entire room were heavily damped, resulting in a decay time constant of about 6 ms for both the measured and computed field transients. The measured eddy-current vector maps were in excellent agreement with predictions based on the theory, suggesting that both the experimental methods and the theory were successful and could be applied to a wide variety of thin conducting structures.

  17. Conductive shield for ultra-low-field magnetic resonance imaging: Theory and measurements of eddy currents.

    Science.gov (United States)

    Zevenhoven, Koos C J; Busch, Sarah; Hatridge, Michael; Oisjöen, Fredrik; Ilmoniemi, Risto J; Clarke, John

    2014-03-14

    Eddy currents induced by applied magnetic-field pulses have been a common issue in ultra-low-field magnetic resonance imaging. In particular, a relatively large prepolarizing field-applied before each signal acquisition sequence to increase the signal-induces currents in the walls of the surrounding conductive shielded room. The magnetic-field transient generated by the eddy currents may cause severe image distortions and signal loss, especially with the large prepolarizing coils designed for in vivo imaging. We derive a theory of eddy currents in thin conducting structures and enclosures to provide intuitive understanding and efficient computations. We present detailed measurements of the eddy-current patterns and their time evolution in a previous-generation shielded room. The analysis led to the design and construction of a new shielded room with symmetrically placed 1.6-mm-thick aluminum sheets that were weakly coupled electrically. The currents flowing around the entire room were heavily damped, resulting in a decay time constant of about 6 ms for both the measured and computed field transients. The measured eddy-current vector maps were in excellent agreement with predictions based on the theory, suggesting that both the experimental methods and the theory were successful and could be applied to a wide variety of thin conducting structures.

  18. Anodal transcranial direct current stimulation reduces psychophysically measured surround suppression in the human visual cortex.

    Directory of Open Access Journals (Sweden)

    Daniel P Spiegel

    Full Text Available Transcranial direct current stimulation (tDCS is a safe, non-invasive technique for transiently modulating the balance of excitation and inhibition within the human brain. It has been reported that anodal tDCS can reduce both GABA mediated inhibition and GABA concentration within the human motor cortex. As GABA mediated inhibition is thought to be a key modulator of plasticity within the adult brain, these findings have broad implications for the future use of tDCS. It is important, therefore, to establish whether tDCS can exert similar effects within non-motor brain areas. The aim of this study was to assess whether anodal tDCS could reduce inhibitory interactions within the human visual cortex. Psychophysical measures of surround suppression were used as an index of inhibition within V1. Overlay suppression, which is thought to originate within the lateral geniculate nucleus (LGN, was also measured as a control. Anodal stimulation of the occipital poles significantly reduced psychophysical surround suppression, but had no effect on overlay suppression. This effect was specific to anodal stimulation as cathodal stimulation had no effect on either measure. These psychophysical results provide the first evidence for tDCS-induced reductions of intracortical inhibition within the human visual cortex.

  19. Current measures of metabolic heterogeneity within cervical cancer do not predict disease outcome

    Directory of Open Access Journals (Sweden)

    Brooks Frank J

    2011-06-01

    Full Text Available Abstract Background A previous study evaluated the intra-tumoral heterogeneity observed in the uptake of F-18 fluorodeoxyglucose (FDG in pre-treatment positron emission tomography (PET scans of cancers of the uterine cervix as an indicator of disease outcome. This was done via a novel statistic which ostensibly measured the spatial variations in intra-tumoral metabolic activity. In this work, we argue that statistic is intrinsically non-spatial, and that the apparent delineation between unsuccessfully- and successfully-treated patient groups via that statistic is spurious. Methods We first offer a straightforward mathematical demonstration of our argument. Next, we recapitulate an assiduous re-analysis of the originally published data which was derived from FDG-PET imagery. Finally, we present the results of a principal component analysis of FDG-PET images similar to those previously analyzed. Results We find that the previously published measure of intra-tumoral heterogeneity is intrinsically non-spatial, and actually is only a surrogate for tumor volume. We also find that an optimized linear combination of more canonical heterogeneity quantifiers does not predict disease outcome. Conclusions Current measures of intra-tumoral metabolic activity are not predictive of disease outcome as has been claimed previously. The implications of this finding are: clinical categorization of patients based upon these statistics is invalid; more sophisticated, and perhaps innately-geometric, quantifications of metabolic activity are required for predicting disease outcome.

  20. High Dynamic Magnetic Beam Current Measurements by Means of Optimised Magneto-Resistance (MR) Sensor Engineering

    CERN Document Server

    Hape, M; Ricken, W

    2005-01-01

    The GSI-FAIR project (facility for antiprotons and ion research) will comprehend DC currents up to around 5 A in the SIS 100 synchrotron and after bunch compression down to 50 ns pulse length the peak currents will reach up to 100 A. To meet these higher demands of beam current measurements new sensor techniques are foreseen. The measurement device itself will be designed in form of a clip-on ampere-meter. The air gap of the flux concentrator is assumed to be around 5 mm and thus, the estimated maximum field therein is around 30 mT for a beam current of 100 A peak. The resolution of this device is aimed to be 1 mA in beam current, corresponding to a system dynamic of around 105. This high demands of beam current measurement require more sophisticated sensor types than just using a Hall probe. The characteristics of AMR (anisotropic magneto-resistance), GMR (giant magneto-resistance) and GMI (giant magneto-impedance) sensors like hysteresis, linearity and sensitivity have been measured within the magnetic fiel...

  1. Ecological validity of pediatric neuropsychological measures: current state and future directions.

    Science.gov (United States)

    Olson, Katie; Jacobson, Kristin K; Van Oot, Peter

    2013-01-01

    Neuropsychologists are increasingly requested to identify specific deficits in cognitive abilities and determine the ways in which these deficits will affect a client's everyday functioning. The demand for prescriptive diagnostic endeavors that provide recommendations for rehabilitation has drawn attention to the necessity of considering the ecological validity of instruments. Most of the current knowledge regarding the ecological validity of neuropsychological measures is the result of studies examining adult and older adult populations. The relationship of test performance and everyday functioning in children has been less examined and is, therefore, less understood. The purpose of this article is to provide a brief history of ecological validity in neuropsychology, discuss why this is an important consideration when working with child populations, and provide suggestions for continued research in this field.

  2. Thermally stimulated depolarization current studies of sulfonated polystyrene ionomers

    Science.gov (United States)

    Carvalho, Antonio José Felix; Viana, Vicente Galber Freitas; Faria, Roberto Mendonça

    2009-12-01

    A detailed study of thermally stimulated depolarization current (TSDC) was carried out to investigate dipolar relaxation and the charge storage phenomenon in films of sulfonated polystyrene (SPS) ionomers having lithium or potassium as counterions. Differential scanning calorimetry measurements were also applied as a complementary technique, mainly to follow the change of the glass transition temperature with the amount of sulfonated groups. It was observed that, since the glass transition does not change significantly with the amount of sulfonated groups, a cluster of multiplets is expected not to be formed in the range used in this work. TSDC of SPS samples polarized at temperatures higher than the glass transition temperature showed three peaks: one at lower temperature (peak β), an intermediate peak (peak α), and a third that appeared at a temperature coincident with the polarization temperature (peak ρ). Quantitative information about trapping-detrapping and dipolar relaxation and their corresponding activation energies was determined by fittings of the deconvoluted peaks with kinetic relaxation processes.

  3. Thermally stimulated depolarization current studies of sulfonated polystyrene ionomers

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Antonio Jose Felix [Universidade Federal de Sao Carlos, Laboratory of Polymers and Renewable Materials, Sorocaba, SP (Brazil); Viana, Vicente Galber Freitas [Universidade Federal do Piaui, Centro de Ciencias da Natureza, Teresina, PI (Brazil); Faria, Roberto Mendonca [USP, Instituto de Fisica de Sao Carlos, SP (Brazil)

    2009-12-15

    A detailed study of thermally stimulated depolarization current (TSDC) was carried out to investigate dipolar relaxation and the charge storage phenomenon in films of sulfonated polystyrene (SPS) ionomers having lithium or potassium as counterions. Differential scanning calorimetry measurements were also applied as a complementary technique, mainly to follow the change of the glass transition temperature with the amount of sulfonated groups. It was observed that, since the glass transition does not change significantly with the amount of sulfonated groups, a cluster of multiplets is expected not to be formed in the range used in this work. TSDC of SPS samples polarized at temperatures higher than the glass transition temperature showed three peaks: one at lower temperature (peak {beta}), an intermediate peak (peak {alpha}), and a third that appeared at a temperature coincident with the polarization temperature (peak {rho}). Quantitative information about trapping-detrapping and dipolar relaxation and their corresponding activation energies was determined by fittings of the deconvoluted peaks with kinetic relaxation processes. (orig.)

  4. Measurement of induced magnetic flux density using injection current nonlinear encoding (ICNE) in MREIT.

    Science.gov (United States)

    Park, Chunjae; Lee, Byung Il; Kwon, Ohin; Woo, Eung Je

    2007-02-01

    Magnetic resonance electrical impedance tomography (MREIT) measures induced magnetic flux densities subject to externally injected currents in order to visualize conductivity distributions inside an electrically conducting object. Injection currents induce magnetic flux densities that appear in phase parts of acquired MR image data. In the conventional current injection method, we inject currents during the time segment between the end of the first RF pulse and the beginning of the reading gradient in order to ensure the gradient linearity. Noting that longer current injections can accumulate more phase changes, we propose a new pulse sequence called injection current nonlinear encoding (ICNE) where the duration of the injection current pulse is extended until the end of the reading gradient. Since the current injection during the reading gradient disturbs the gradient linearity, we first analyze the MR signal produced by the ICNE pulse sequence and suggest a novel algorithm to extract the induced magnetic flux density from the acquired MR signal. Numerical simulations and phantom experiments show that the new method is clearly advantageous in terms of the reduced noise level in measured magnetic flux density data. The amount of noise reduction depends on the choice of the data acquisition time and it was about 24% when we used a prolonged data acquisition time of 10.8 ms. The ICNE method will enhance the clinical applicability of the MREIT technique when it is combined with an appropriate phase artefact minimization method.

  5. Current density imaging using directly measured harmonic Bz data in MREIT.

    Science.gov (United States)

    Park, Chunjae; Kwon, Oh In

    2013-01-01

    Magnetic resonance electrical impedance tomography (MREIT) measures magnetic flux density signals through the use of a magnetic resonance imaging (MRI) in order to visualize the internal conductivity and/or current density. Understanding the reconstruction procedure for the internal current density, we directly measure the second derivative of Bz data from the measured k-space data, from which we can avoid a tedious phase unwrapping to obtain the phase signal of Bz . We determine optimal weighting factors to combine the derivatives of magnetic flux density data, [Symbol: see text](2) Bz , measured using the multi-echo train. The proposed method reconstructs the internal current density using the relationships between the induced internal current and the measured [Symbol: see text](2) Bz data. Results from a phantom experiment demonstrate that the proposed method reduces the scanning time and provides the internal current density, while suppressing the background field inhomogeneity. To implement the real experiment, we use a phantom with a saline solution including a balloon, which excludes other artifacts by any concentration gradient in the phantom.

  6. Technical Note: Influence of Compton currents on profile measurements in small-volume ion chambers

    Energy Technology Data Exchange (ETDEWEB)

    Tanny, Sean; Sperling, Nicholas; Parsai, E. Ishmael, E-mail: e.parsai@utoledo.edu [Department of Radiation Oncology, University of Toledo Medical Center, 1325 Conference Drive, Toledo, Ohio 43614 (United States); Holmes, Shannon [Standard Imaging, 3120 Deming Way, Middleton, Wisconsin 53562 (United States)

    2015-10-15

    Purpose: This work is to evaluate the effects of Compton current generation in three small-volume ionization chambers on measured beam characteristics for electron fields. Methods: Beam scans were performed using Exradin A16, A26, and PTW 31014 microchambers. Scans with varying chamber components shielded were performed. Static point measurements, output factors, and cable only irradiations were performed to determine the contribution of Compton currents to various components of the chamber. Monte Carlo simulations were performed to evaluate why one microchamber showed a significant reduction in Compton current generation. Results: Beam profiles demonstrated significant distortion for two of the three chambers when scanned parallel to the chamber axis, produced by electron deposition within the wire. Measurements of ionization produced within the cable identified Compton current generation as the cause of these distortions. The size of the central collecting wire was found to have the greatest influence on the magnitude of Compton current generation. Conclusions: Microchambers can demonstrate significant (>5%) deviations from properties as measured with larger volume chambers (0.125 cm{sup 3} and above). These deviations can be substantially reduced by averaging measurements conducted at opposite polarities.

  7. Study on Fault Current of DFIG during Slight Fault Condition

    OpenAIRE

    Xiangping Kong; Zhe Zhang; Xianggen Yin; Zhenxing Li

    2013-01-01

    In order to ensure the safety of DFIG when severe fault happens, crowbar protection is adopted. But during slight fault condition, the crowbar protection will not trip, and the DFIG is still excited by AC-DC-AC converter. In this condition, operation characteristics of the converter have large influence on the fault current characteristics of DFIG. By theoretical analysis and digital simulation, the fault current characteristics of DFIG during slight voltage dips are studied. And the influenc...

  8. Air Quality Study Using Satellites - Current Capability and Future Plans

    Science.gov (United States)

    Bhartia, Pawan K.; Joiner, Joanna; Gleason, James; Liu, Xiong; Torres, Omar; Krotkov, Nickolay; Ziemke, Jerry; Chandra, Sushil

    2008-01-01

    Satellite instruments have had great success in monitoring the stratospheric ozone and in understanding the processes that control its daily to decadal scale variations. This field is now reaching its zenith with a number of satellite instruments from the US, Europe and Canada capping several decades of active research in this field. The primary public policy imperative of this research was to make reliable prediction of increases in biologically active surface UV radiation due to human activity. By contrast retrieval from satellite data of atmospheric constituents and photo-chemically active radiation that affect air quality is a new and growing field that is presenting us with unique challenges in measurement and data interpretation. A key distinction compared to stratospheric sensors is the greatly enhanced role of clouds, aerosols, and surfaces (CAS) in determining the quality and quantity of useful data that is available for air quality research. In our presentation we will use data from several sensors that are currently flying on the A-train satellite constellation, including OMI, MODIS, CLOUDSAT, and CALIPSO, to highlight that CAS can have both positive and negative effects on the information content of satellite measurements. This is in sharp contrast to other fields of remote sensing where CAS are usually considered an interference except in those cases when they are the primary subject of study. Our analysis has revealed that in the reflected wavelengths one often sees much further down into the atmosphere, through most cirrus, than one does in the emitted wavelengths. The lower level clouds provide a nice background against which one can track long-range transport of trace gases and aerosols. In addition, differences in trace gas columns estimated over cloudy and adjacent clear pixels can be used to measure boundary layer trace gases. However, in order to take full advantage of these features it will be necessary to greatly advance our understanding of

  9. Near-surface current meter array measurements of internal gravity waves

    Energy Technology Data Exchange (ETDEWEB)

    Jones, H.B.E. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    We have developed various processing algorithms used to estimate the wave forms produced by hydrodynamic Internal Waves. Furthermore, the estimated Internal Waves are used to calculate the Modulation Transfer Function (MTF) which relates the current and strain rate subsurface fields to surface scattering phenomenon imaged by radar. Following a brief discussion of LLNL`s measurement platform (a 10 sensor current meter array) we described the generation of representative current and strain rate space-time images from measured or simulated data. Then, we present how our simulation capability highlighted limitations in estimating strain rate. These limitations spurred the application of beamforming techniques to enhance our estimates, albeit at the expense of collapsing our space-time images to 1-D estimates. Finally, we discuss progress with regard to processing the current meter array data captured during the recent Loch Linnhe field trials.

  10. Nonideal Quantum Measurement Effects on the Switching Currents Distribution of Josephson Junctions

    CERN Document Server

    Pierro, Vincenzo

    2016-01-01

    The quantum character of Josephson junctions is ordinarily revealed through the analysis of the switching currents, i.e. the current at which a finite voltage appears: A sharp rise of the voltage signals the passage (tunnel) from a trapped state (the zero voltage solution) to a running state (the finite voltage solution). In this context, we investigate the probability distribution of the Josephson junctions switching current taking into account the effect of the bias sweeping rate and introducing a simple nonideal quantum measurements scheme. The measurements are modelled as repeated voltage samplings at discrete time intervals, that is with repeated projections of the time dependent quantum solutions on the static or the running states, to retrieve the probability distribution of the switching currents. The distribution appears to be immune of the quantum Zeno effect, and it is close to, but distinguishable from, the Wentzel-Kramers-Brillouin approximation. For energy barriers comparable to the quantum fund...

  11. 广西残疾人竞技体育现状及发展对策研究%A Study on the Current Situation of Athletic Sports for Handicapped People in Guangxi and Measures for Its Development

    Institute of Scientific and Technical Information of China (English)

    唐飚; 唐枫; 钟文

    2012-01-01

    Based on a comprehensive analysis of the history and current situation of the development of handicapped sports in Guangxi, this paper points out that the handicapped sports in Guangxi is faced with a series of difficulties and crises, such as descending results, aging athletes, inadequate reserve forces, insufficient input, out-of-date training conditions, inferior quality of equipment, imperfect management, shortage of teachers and administering staff. It offers 7 proposals to promote the development of handicapped sports in Guangxi, e. G. Collecting funds, tapping event resources, innovating the administering system, inventing training system of physical education teachers for the handicapped and others.%通过对广西残疾人竞技体育的发展历史和现状的综合分析,指出了广西残疾人竞技体育正面临着成绩下滑、运动员队伍老化,后备力量跟不上、投入严重不足、训练条件滞后、运动器材科技含量不高、管理机构不健全、管理人才和体育师资严重短缺等一系列困难和危机,并提出了筹措资金、挖掘项目资源、创新残疾体育竞技管理体制、建立残疾体育师资培养体制等7项对策,以促进广西残疾人竞技体育的发展.

  12. Non-invasively measured cardiac magnetic field maps improve the estimation of the current distribution

    OpenAIRE

    Kosch, Olaf; Steinhoff, Uwe; Trahms, Lutz; Trontelj, Zvonko; Jazbinšek, Vojko

    2015-01-01

    Comprehensive body surface potential mapping (BSPM) and magnetic field mapping (MFM) measurements have been carried out in order to improve the estimation of the current distribution generated by the human heart. Electric and magnetic fields and also the planar gradient of the magnetic field during the QRS complex were imaged as a time series of field maps. A model of the current distribution should explain the features of both BSPM and MFM. Simulated maps generated by a single dipole or a st...

  13. Characterization of dielectric barrier discharge in air applying current measurement, numerical simulation and emission spectroscopy

    CERN Document Server

    Rajasekaran, Priyadarshini; Awakowicz, Peter

    2012-01-01

    Dielectric barrier discharge (DBD) in air is characterized applying current measurement, numerical simulation and optical emission spectroscopy (OES). For OES, a non-calibrated spectrometer is used. This diagnostic method is applicable when cross-sectional area of the active plasma volume and current density can be determined. The nitrogen emission in the spectral range of 380 nm- 406 nm is used for OES diagnostics. Electric field in the active plasma volume is determined applying the measured spectrum, well-known Frank-Condon factors for nitrogen transitions and numerically- simulated electron distribution functions. The measured electric current density is used for determination of electron density in plasma. Using the determined plasma parameters, the dissociation rate of nitrogen and oxygen in active plasma volume are calculated, which can be used by simulation of the chemical kinetics.

  14. Pixelated Geiger-Mode Avalanche Photo-Diode Characterization through Dark Current Measurement

    CERN Document Server

    Amaudruz, Pierre-André; Gilhully, Colleen; Goertzen, Andrew; James, Lloyd; Kozlowski, Piotr; Retière, Fabrice; Shams, Ehsan; Sossi, Vesna; Stortz, Greg; Thiessen, Jonathan D; Thompson, Christopher J

    2013-01-01

    PIXELATED geiger-mode avalanche photodiodes(PPDs), often called silicon photomultipliers (SiPMs) are emerging as an excellent replacement for traditional photomultiplier tubes (PMTs) in a variety of detectors, especially those for subatomic physics experiments, which requires extensive test and operation procedures in order to achieve uniform responses from all the devices. In this paper, we show for two PPD brands, Hamamatsu MPPC and SensL SPM, that the dark noise rate, breakdown voltage and rate of correlated avalanches can be inferred from the sole measure of dark current as a function of operating voltage, hence greatly simplifying the characterization procedure. We introduce a custom electronics system that allows measurement for many devices concurrently, hence allowing rapid testing and monitoring of many devices at low cost. Finally, we show that the dark current of Hamamastu Multi-Pixel Photon Counter (MPPC) is rather independent of temperature at constant operating voltage, hence the current measure...

  15. Measurement system for determination of current-voltage characteristics of PV modules

    Science.gov (United States)

    Idzkowski, Adam; Walendziuk, Wojciech; Borawski, Mateusz; Sawicki, Aleksander

    2015-09-01

    The realization of a laboratory stand for testing photovoltaic panels is presented here. The project of the laboratory stand was designed in SolidWorks software. The aim of the project was to control the electrical parameters of a PV panel. For this purpose a meter that measures electrical parameters i.e. voltage, current and power, was realized. The meter was created with the use of LabJack DAQ device and LabVIEW software. The presented results of measurements were obtained in different conditions (variable distance from the source of light, variable tilt angle of the panel). Current voltage characteristics of photovoltaic panel were created and all parameters could be detected in different conditions. The standard uncertainties of sample voltage, current, power measurements were calculated. The paper also gives basic information about power characteristics and efficiency of a solar cell.

  16. A compact x-ray beam intensity monitor using gas amplified sample current measurement

    Science.gov (United States)

    Hayakawa, Shinjiro; Kobayashi, Kazuo; Gohshi, Yohichi

    2000-01-01

    Development of a compact beam intensity monitor using gas amplified sample current measurement is described. The monitor can be a powerful tool for x-ray spectroscopy and microscopy when the beam is defined by a small pinhole or slits and when the workspace around the sample is limited. The thickness of the monitor is as small as approximately 3 mm, and the dimension is 10 mm square. The photon flux is monitored by measuring x-ray excited current from an Al foil under atmospheric conditions. Emitted electrons from the Al foil can ionize surrounding air molecules, and the gas amplified current can be measured with the use of a biased grid that prevents created ion pairs from recombination.

  17. SOL plasma measurements during high density and long duration current drive on TRIAM-1M

    Energy Technology Data Exchange (ETDEWEB)

    Takemura, Takeharu; Kawasaki, Shoji; Jotaki, Eriko; Makino, Ken-ichi; Sakamoto, Mizuki; Nakamura, Kazuo; Nakamura, Yukio; Itoh, Sanae; Itoh, Satoshi [Kyushu Univ., Kasuga, Fukuoka (Japan). Research Inst. for Applied Mechanics

    1997-02-01

    In the superconducting, strong magnetic field tokamak, TRIAM-1M, for the purpose of maintaining high density plasma for long time, the current drive experiment using 8.2 GHz lower hybrid wave has been carried out. For maintaining high density plasma for long time, it is indispensable to control gas puff and recycling from wall, as these are closely related to the structure and characteristics of boundary plasma including scrape-off layer (SOL). In this study, in the high density, long time current drive using 8.2 GHz lower hybrid wave, the electron density and electron temperature of SOL plasma were measured by using double probe, and the z-direction distribution and the toroidal magnetic field dependence of the electron density and electron temperature of SOL plasma were examined and compared with OH discharge. Also the dependence of the electron density of SOL plasma on the phase difference in a adjoining waveguide tubes was examined. The experimental setup and the double probe theory are explained. The experimental results of the change with time lapse, the z-direction distribution and the magnetic field dependence of the electron density and electron temperature of SOL plasma are reported. (K.I.)

  18. Measurement, Modeling and Reconstruction of Parallel Currents in the HSX Stellarator

    Science.gov (United States)

    Schmitt, J. C.; Talmadge, J. N.; Lore, J.

    2010-11-01

    Parallel currents are measured with a set of magnetic diagnostics on the HSX. Measurements show that the Pfirsch-Schlüter current is helical due to the lack of toroidal curvature and is reduced in magnitude compared to an equivalent tokamak because of the high effective transform (˜3) in a quasihelically symmetric stellarator. The bootstrap current density is calculated using the PENTA code,^1 which includes momentum conservation between plasma species. The data shows better agreement with a model that includes momentum conservation. HSX plasmas are heated by a 28 GHz gyrotron which allows the electrons to access the low collisionality regime, while the cold ions are generally in the plateau. In HSX, a 3-D plasma with small symmetry-breaking, the calculations show that for two species in different collisionality regimes, the bootstrap current can be strong function of the radial electric field. In the plasma core, multiple stable electric field solutions to the ambipolarity constraint exist. The large positive electric field, the ``electron-root'' solution, can result in a reduction and even a reversal of the bootstrap current. The measured fields and fluxes are used in the V3FIT^2 code to reconstruct the current profile. Supported by DOE grant DE-FG02-93ER54222. ^1D.A. Spong, Phys. Plasmas 12 (2005) 056114. ^2J.D. Hanson, et al, Nucl. Fusion 49 (2009) 075031.

  19. A programmable low power current source for bioimpedance measurement: Towards a wearable personalized health assistant.

    Science.gov (United States)

    Hamed, Zaid; Tenhunen, Hannu; Yang, Geng

    2015-01-01

    Bioimpedance is a noninvasive measurement method that facilitates body composition analysis, besides being indicative of many other health parameters. In this work a novel programmable, low complexity, high output impedance, high voltage compliance and wideband current source for bioimpedance applications is presented. Previously, we designed, fabricated and tested in vivo a bio-patch for acquisition of multiple bio-signals. Upon integration with our previous work, this circuit is envisioned to constitute part of a personalized health assistant. Simulation at worst case corners and real operation conditions was carried out using UMC-180 nm 1 poly 6 metal CMOS process. Full duty cycle, shortened or stepped square waves can be generated. Amplitude control of 8 different current levels is supported. Frequency can be tuned up to 1 MHz and an output impedance of 2.8 MO @ 250 KHz is achieved at full current capacity. Total current consumption is comparable to the injected current, making the circuit highly efficient.

  20. A self-discharge model of Lithium-Sulfur batteries based on direct shuttle current measurement

    DEFF Research Database (Denmark)

    Knap, Vaclav; Stroe, Daniel Loan; Swierczynski, Maciej Jozef

    2016-01-01

    . A simple but comprehensive mathematical model of the Li-S battery cell self-discharge based on the shuttle current was developed and is presented. The shuttle current values for the model parameterization were obtained from the direct shuttle current measurements. Furthermore, the battery cell depth......-of-discharge values were recomputed in order to account for the influence of the self-discharge and provide a higher accuracy of the model. Finally, the derived model was successfully validated against laboratory experiments at various conditions....

  1. Current-driven antivortex core resonance measured by the rectifying effect

    Energy Technology Data Exchange (ETDEWEB)

    Goto, Minori, E-mail: mgoto@phys.keio.ac.jp [Graduate School of Engineering Science, Osaka University, J205, 1-3, Machikaneyamacho, Toyonaka, Osaka, 560-8531 (Japan); Nozaki, Yukio, E-mail: nozaki@phys.keio.ac.jp [Department of Physics, Keio University, 22-102, 3-14-1, Hiyoshi, Kohokuku, Yokohama, Kanagawa, 223-8522 (Japan)

    2016-02-15

    We demonstrate the current-driven resonance of a single antivortex core confined in a cross-shaped Ni{sub 81}Fe{sub 19} wire. The antivortex core dynamics can be excited purely by spin transfer torque; therefore, it is significant to understand the current-induced magnetization dynamics. The antivortex core resonance can be measured from the frequency dependence of a rectified voltage generated by an alternating current application. We found that the resonance frequency and peak amplitude greatly depend on the external magnetic field. This result is in good agreement with micromagnetic simulation.

  2. A Primary and Backup Protection Algorithm based on Voltage and Current Measurements for HVDC Grids

    OpenAIRE

    Abedrabbo, Mudar; Van Hertem, Dirk

    2016-01-01

    DC grids are susceptible to DC side faults, which lead to a rapid rise of the DC side currents. DC side faults should be detected in a very short time before fault currents cause damage to the system or equipment, e.g., exceed the maximum interruptible limits of DC circuit breaker. This paper presents a primary and backup protective data-based algorithm. The proposed algorithm depends on the local voltage and current measurements to detect and identify various kinds of faults in the HVDC grid...

  3. Management system to a photovoltaic panel based on the measurement of short-circuit currents

    Science.gov (United States)

    Dordescu, M.

    2016-12-01

    This article is devoted to fundamental issues arising from operation in terms of increased energy efficiency for photovoltaic panel (PV). By measuring the current from functioning cage determine the current value prescribed amount corresponding to maximum power point results obtained by requiring proof of pregnancy with this method are the maximum energy possible, thus justifying the usefulness of this process very simple and inexpensive to implement in practice. The proposed adjustment method is much simpler and more economical than conventional methods that rely on measuring power cut.

  4. Design, Fabrication and Temperature Sensitivity Testing of a Miniature Piezoelectric-Based Sensor for Current Measurements

    Directory of Open Access Journals (Sweden)

    Steven B. Lao

    2014-07-01

    Full Text Available Grid capacity, reliability, and efficient distribution of power have been major challenges for traditional power grids in the past few years. Reliable and efficient distribution within these power grids will continue to depend on the development of lighter and more efficient sensing units with lower costs in order to measure current and detect failures across the grid. The objective of this paper is to present the development of a miniature piezoelectric-based sensor for AC current measurements in single conductors, which are used in power transmission lines. Additionally presented in this paper are the thermal testing results for the sensor to assess its robustness for various operating temperatures.

  5. Early Identification of Small Airways Disease on Lung Cancer Screening CT: Comparison of Current Air Trapping Measures

    NARCIS (Netherlands)

    Mets, O.M.; Zanen, P.; Lammers, J.-W.J.; Isgum, I.; Gietema, H.A.; Ginneken, B. van; Prokop, M.; Jong, P. A. de

    2012-01-01

    BACKGROUND : Lung cancer screening CT scans might provide valuable information about air trapping as an early indicator of smoking-related lung disease. We studied which of the currently suggested measures is most suitable for detecting functionally relevant air trapping on low-dose computed tomogra

  6. Ultra-Thin Flexible Eddy Current Sensor Array for Gap Measurements

    Institute of Scientific and Technical Information of China (English)

    丁天怀; 陈祥林; 黄毅平

    2004-01-01

    An ultra-thin flexible eddy current proximity sensor array was developed for online measurements of tiny gaps between large smooth metallic and nonmetallic surfaces of arbitrary shapes. The probe of the flexible eddy current sensor array, which includes a set of sensor coils, is fabricated on a thin flexible substrate using the flexible printed circuit board process which allows the probe to be very thin and flexible so that it can conform to the surface geometry of the measured objects. The sensor coils are connected to an inductance-capacitance oscillator, which converts the distance between the sensor coil and the metallic target to a frequency output. Experimental results show that the measurement accuracy of the sensor system can reach ±0.5% for a 2-mm gap and the sensor system is suitable for online gap measurements.

  7. Measurement of inclusive charged current interactions on carbon in a few-GeV neutrino beam

    CERN Document Server

    jima, Y Naka; Brice, S J; Bugel, L; Catala-Perez, J; Cheng, G; Conrad, J M; Djurcic, Z; Dore, U; Finley, D A; Franke, A J; Giganti, C; Gomez-Cadenas, J J; Guzowski, P; Hanson, A; Hayato, Y; Hiraide, K; Jover-Manas, G; Karagiorgi, G; Katori, T; Kobayashi, Y K; Kobilarcik, T; Kubo, H; Kurimoto, Y; Louis, W C; Loverre, P F; Ludovici, L; Mahn, K B M; Mariani, C; Masuike, S; Matsuoka, K; McGary, V T; Metcalf, W; Mills, G B; Mitsuka, G; Miyachi, Y; Mizugashira, S; Moore, C D; Nakaya, T; Napora, R; Nienaber, P; Orme, D; Otani, M; Russell, A D; Sanchez, F; Shaevitz, M H; Shibata, T -A; Sorel, M; Stefanski, R J; Takei, H; Tanaka, H -K; Tanaka, M; Tayloe, R; Taylor, I J; Tesarek, R J; Uchida, Y; Van de Water, R; Walding, J J; Wascko, M O; White, H B; Yokoyama, M; Zeller, G P; Zimmerman, E D

    2010-01-01

    The SciBooNE Collaboration reports a measurement of inclusive charged current interactions of muon neutrinos on carbon with an average energy of 0.8~GeV using the Fermilab Booster Neutrino Beam. We compare our measurement with two neutrino interaction simulations: NEUT and NUANCE. The charged current interaction rates (product of flux and cross section) are extracted by fitting the muon kinematics, with a precision of 6-15% for the energy dependent and 3% for the energy integrated analyses. We also extract CC inclusive interaction cross sections from the observed rates, with a precision of 10-30% for the energy dependent and 8% for the energy integrated analyses. This is the first measurement of the CC inclusive cross section on carbon around 1 GeV. These results can be used to convert previous SciBooNE cross section ratio measurements to absolute cross section values.

  8. Measurement of inclusive charged current interactions on carbon in a few-GeV neutrino beam

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, Y.; jima, Y.Naka; Alcaraz-Aunion, J.L.; Brice, S.J.; Bugel, L.; Catala-Perez, J.; Cheng, G.; Conrad, J.M.; Djurcic, Z.; Dore, U.; Finley, D.A.; /Kyoto U. /Barcelona, IFAE /Fermilab /MIT /Valencia U. /Columbia U. /MIT /Columbia U. /INFN, Rome /Rome U. /Fermilab /Columbia U. /INFN, Rome /Rome U.

    2010-11-01

    The SciBooNE Collaboration reports a measurement of inclusive charged current interactions of muon neutrinos on carbon with an average energy of 0.8 GeV using the Fermilab Booster Neutrino Beam. We compare our measurement with two neutrino interaction simulations: NEUT and NUANCE. The charged current interaction rates (product of flux and cross section) are extracted by fitting the muon kinematics, with a precision of 6-15% for the energy dependent and 3% for the energy integrated analyses. We also extract CC inclusive interaction cross sections from the observed rates, with a precision of 10-30% for the energy dependent and 8% for the energy integrated analyses. This is the first measurement of the CC inclusive cross section on carbon around 1 GeV. These results can be used to convert previous SciBooNE cross section ratio measurements to absolute cross section values.

  9. Time evolving bed shear stress due the passage of gravity currents estimated with ADVP velocity measurements

    Science.gov (United States)

    Zordan, Jessica; Schleiss, Anton J.; Franca, Mário J.

    2016-04-01

    Density or gravity currents are geophysical flows driven by density gradients between two contacting fluids. The physical trigger mechanism of these phenomena lays in the density differences which may be caused by differences in the temperature, dissolved substances or concentration of suspended sediments. Saline density currents are capable to entrain bed sediments inducing signatures in the bottom of sedimentary basins. Herein, saline density currents are reproduced in laboratory over a movable bed. The experimental channel is of the lock-exchange type, it is 7.5 m long and 0.3 m wide, divided into two sections of comparable volumes by a sliding gate. An upstream reach serves as a head tank for the dense mixture; the current propagates through a downstream reach where the main measurements are made. Downstream of the channel a tank exist to absorb the reflection of the current and thus artifacts due to the limited length of the channel. High performance thermoplastic polyurethane simulating fine sediments forms the movable bed. Measures of 3D instantaneous velocities will be made with the use of the non-intrusive technique of the ADV (Acoustic Doppler Current Profiler). With the velocity measurements, the evolution in time of the channel-bed shear stress due the passage of gravity currents is estimated. This is in turn related to the observed erosion and to such parameters determinant for the dynamics of the current as initial density difference, lock length and channel slope. This work was funded by the ITN-Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme FP7-PEOPLE-2013-ITN under REA grant agreement n_607394-SEDITRANS.

  10. A Measurement of the Neutrino Neutral Current Pi0 Cross Section at MiniBooNE

    Energy Technology Data Exchange (ETDEWEB)

    Raaf, Jennifer Lynne

    2005-05-01

    The MiniBooNE neutrino beam and detector at Fermilab are used to study the production of neutral current {pi}{sup 0} events. The cross sections for neutrino interactions with mineral oil (CH{sub 2}) are reported for resonantly produced and coherently produced single {pi}{sup 0} events. We measure a resonant single {pi}{sup 0} cross section of {sigma}({nu}{sub {mu}} N {pi}{sup 0}) = (0.0129 {+-} 0.0011(stat.) {+-} 0.0043(syst.)) x 10{sup -36} cm{sup 2}/CH{sub 2} at a mean neutrino energy of 1.26 GeV. We measure a coherent single {pi}{sup 0} cross section of {sigma}({nu}{sub {mu}} A {yields} {nu}{sub {mu}} A {pi}{sup 0}) = (0.00077 {+-} 0.00016 (stat.) {+-} 0.00036 (syst.)) x 10{sup -36} cm{sup 2}/CH{sub 2} at mean neutrino energy 1.12 GeV.

  11. Fog and Tidal Current Connection at Cape Cod Canal-Early Recognition and Recent Measurements.

    Science.gov (United States)

    Woodcock, Alfred H.

    1982-02-01

    Notes by Gardner Emmons about the initiation of low advective fogs on Cape Cod are presented. Subsequent measurements made in these fogs confirm his suggestion that mixing and temperature changes associated with tidal currents account for the fog. Puzzling temperature measurements that are at apparent variance with the mixing theory of fog formation are presented. It is proposed that these temperature discrepancies are due to the effects of water vapor condensation on the sea water surface.

  12. High-accuracy current measurement with low-cost shunts by means of dynamic error correction

    OpenAIRE

    Weßkamp, Patrick; Melbert, Joachim

    2016-01-01

    Measurement of electrical current is often performed by using shunt resistors. Thermal effects due to self-heating and ambient temperature variation limit the achievable accuracy, especially if low-cost shunt resistors with increased temperature coefficients are utilized. In this work, a compensation method is presented which takes static and dynamic temperature drift effects into account and provides a significant reduction of measurement error. A thermal model of the shunt...

  13. A Measurement of Coherent Neutral Pion Production in Neutrino Neutral Current Interactions in NOMAD experiment

    CERN Document Server

    Kullenberg, C T

    2009-01-01

    We present a study of exclusive neutral pion production in neutrino-nucleus Neutral Current interactions using data from the NOMAD experiment at the CERN SPS. The data correspond to $1.44 \\times 10^6$ muon-neutrino Charged Current interactions in the energy range $2.5 \\leq E_{\

  14. Influence of Assimilation of Subsurface Temperature Measurements on Simulations of Equatorial Undercurrent and South Equatorial Current Along the Pacific Equator

    Science.gov (United States)

    Halpern, David; Leetmaan, Ants; Reynolds, Richard W.; Ji, Ming

    1997-01-01

    Equatorial Pacific current and temperature fields were simulated with and without assimilation of subsurface temperature measurements for April 1992 - March 1995, and compared with moored bouy and research vessel current measurements.

  15. Performance measurements of superconducting current leads having low helium boiloff rates

    Science.gov (United States)

    Niemann, R. C.; Cha, Y. S.; Hull, J. R.

    1992-08-01

    We have created a performance-measurement facility for current leads as a part of our Laboratory's program to develop applications for high-temperature superconductors. The facility measures the rate of helium vapor boil-off due to current-lead heat input to liquid helium and the pressure drop across a current lead for a pair of leads operating at currents to 100 A. The facility's major components are a liquid-helium dewar having low background heat input; a dewar insert which incorporates the current leads and associated instrumentation or connections for flow, pressure, level, temperature and voltage measurements; and a computer-driven data-acquisition system. The background beat input is small enough so that boiloff rates one-tenth that of an optimized conventional lead can be characterized. The facility has been operated with both conventional; i.e., vapor-cooled copper leads and with leads incorporating high-temperature superconductors at their cold ends. Details of the facility design, construction and operating experiences are presented.

  16. Measurement of sub-picoampere direct currents with uncertainties below ten attoamperes

    Science.gov (United States)

    Krause, C.; Drung, D.; Scherer, H.

    2017-02-01

    A new type of the ultrastable low-noise current amplifier (ULCA) is presented. It involves thick-film resistors to achieve a high feedback resistance of 185 GΩ at the input amplifier. An improved noise level of 0.4 fA/√{Hz} with a 1/f corner of about 30 μHz and an effective input bias current well below 100 aA are demonstrated. For small direct currents, measurement uncertainties below 10 aA are achievable even without current reversal or on/off switching. Above about 1 pA, the stability of the ULCA's resistor network limits the relative measurement uncertainty to about 10 parts per million. The new setup is used to characterize and optimize the noise in the wiring installed on a dilution refrigerator for current measurements on single-electron transport pumps. In a test configuration connected to the wiring in a pulse tube refrigerator, a total noise floor of 0.44 fA/√{Hz} was achieved including the contributions of amplifier and cryogenic wiring.

  17. Infection prevention and control measures currently applied in South African audiology.

    Science.gov (United States)

    Ehlert, Katerina; Naude, Alida M

    2014-11-11

    To counter the global increase in infection-related deaths, infection control has recently developed into an active area of research. Many diseases can be prevented by infection control. In the confines of the audiology clinic, cross-contamination by micro-organisms associated with opportunistic infections remains a real concern. The primary aim of the study was to ascertain the methods that audiologists in South Africa use to prevent and control the spread of infections during and after consultation with clients. A survey study was conducted, using a self-administered questionnaire. Fifty currently practising audiologists participated in the study. The majority (84%; n = 42) of respondents acknowledged the importance of hand hygiene for the purpose of infection control, with 76% (n = 38) making use of no-rinse hand sanitisers. Approximately a third of audiologists wear gloves during procedures such as otoscopy and immittance, and while handling hearing aids. Disinfecting audiological equipment seem to be the preferred choice of infection control, with only 60% (n = 30) of respondents sterilising audiological equipment after each individual patient consultation. Less than half of the respondents disinfected touch surfaces and toys in the reception area. Based on the results, further education and training should focus on measures implemented in infection control, awareness of possible risk factors at work settings, and vaccination as an effective means of infection control.

  18. Infection prevention and control measures currently applied in South African audiology

    Directory of Open Access Journals (Sweden)

    Katerina Ehlert

    2014-06-01

    Full Text Available Background: To counter the global increase in infection-related deaths, infection control has recently developed into an active area of research. Many diseases can be prevented by infection control. In the confines of the audiology clinic, cross-contamination by micro-organisms associated with opportunistic infections remains a real concern.Objective: The primary aim of the study was to ascertain the methods that audiologists in South Africa use to prevent and control the spread of infections during and after consultation with clients.Method: A survey study was conducted, using a self-administered questionnaire. Fifty currently practising audiologists participated in the study.Results: The majority (84%; n = 42 of respondents acknowledged the importance of hand hygiene for the purpose of infection control, with 76% (n = 38 making use of no-rinse hand sanitisers. Approximately a third of audiologists wear gloves during procedures such as otoscopy and immittance, and while handling hearing aids. Disinfecting audiological equipment seem to be the preferred choice of infection control, with only 60% (n = 30 of respondents sterilising audiological equipment after each individual patient consultation. Less than half of the respondents disinfected touch surfaces and toys in the reception area.Conclusions: Based on the results, further education and training should focus on measures implemented in infection control, awareness of possible risk factors at work settings, and vaccination as an effective means of infection control.

  19. Measurement of eddy-current distribution in the vacuum vessel of the Sino-UNIted Spherical Tokamak

    Science.gov (United States)

    Li, G.; Tan, Y.; Liu, Y. Q.

    2015-08-01

    Eddy currents have an important effect on tokamak plasma equilibrium and control of magneto hydrodynamic activity. The vacuum vessel of the Sino-UNIted Spherical Tokamak is separated into two hemispherical sections by a toroidal insulating barrier. Consequently, the characteristics of eddy currents are more complex than those found in a standard tokamak. Thus, it is necessary to measure and analyze the eddy-current distribution. In this study, we propose an experimental method for measuring the eddy-current distribution in a vacuum vessel. By placing a flexible printed circuit board with magnetic probes onto the external surface of the vacuum vessel to measure the magnetic field parallel to the surface and then subtracting the magnetic field generated by the vertical-field coils, the magnetic field due to the eddy current can be obtained, and its distribution can be determined. We successfully applied this method to the Sino-UNIted Spherical Tokamak, and thus, we obtained the eddy-current distribution despite the presence of the magnetic field generated by the external coils.

  20. Current research projects on traffic conflicts technique studies.

    NARCIS (Netherlands)

    Hondel, M. van den & and Kraay, J.H.

    1979-01-01

    A review of current research concerning the development, evaluation and use of the traffic conflicts technique is presented. The 32 studies, selected from the IRRD data base, are listed alphabetically by names of countries and under countries by names of research organizations. The IRRD descriptions

  1. Subminiature eddy current transducers for studying boride coatings

    Science.gov (United States)

    Dmitriev, S. F.; Ishkov, A. V.; Malikov, V. N.; Sagalakov, A. M.

    2016-07-01

    Strengthening of parts and units of machines, increased reliability and longer service life is an important task of modern mechanical engineering. The main objects of study in the work were selected steel 65G and 50HGA, wear-resistant boride coatings ternary system Fe-B-Fe n B which were investigated by scanning electron microscopy and eddy-current nondestructive methods.

  2. Cartography and Population Geography as Current Events: A Case Study

    Science.gov (United States)

    Comenetz, Joshua

    2003-01-01

    The Sanders housing lawsuit in Pennsylvania provides a case study of how to incorporate current events into the teaching of cartography or population geography at the high school or college level. Settlement of the Sanders case resulted in the release of information about the segregation of public housing by race in the Pittsburgh area. The issues…

  3. Current density distribution mapping in PEM fuel cells as an instrument for operational measurements

    Energy Technology Data Exchange (ETDEWEB)

    Geske, M.; Heuer, M.; Heideck, G.; Styczynski, Z. A. [Otto-von-Guericke University Magdeburg, Chair Electric Power Networks and Renewable Energy Sources, Magdeburg (Germany)

    2010-07-01

    A newly developed measurement system for current density distribution mapping has enabled a new approach for operational measurements in proton exchange membrane fuel cells (PEMFC). Taking into account previously constructed measurement systems, a method based on a multi layer printed circuit board was chosen for the development of the new system. This type of system consists of a sensor, a special electronic device and the control and visualization PC. For the acquisition of the current density distribution values, a sensor device was designed and installed within a multilayer printed circuit board with integrated shunt resistors. Varying shunt values can be taken into consideration with a newly developed and evaluated calibration method. The sensor device was integrated in a PEM fuel cell stack to prove the functionality of the whole measurement system. A software application was implemented to visualize and save the measurement values. Its functionality was verified by operational measurements within a PEMFC system. Measurement accuracy and possible negative reactions of the sensor device during PEMFC operation are discussed in detail in this paper. The developed system enables operational measurements for different operating phases of PEM fuel cells. Additionally, this can be seen as a basis for new opportunities of optimization for fuel cell design and operation modes. (author)

  4. Current Density Distribution Mapping in PEM Fuel Cells as An Instrument for Operational Measurements

    Directory of Open Access Journals (Sweden)

    Martin Geske

    2010-04-01

    Full Text Available A newly developed measurement system for current density distribution mapping has enabled a new approach for operational measurements in proton exchange membrane fuel cells (PEMFC. Taking into account previously constructed measurement systems, a method based on a multi layer printed circuit board was chosen for the development of the new system. This type of system consists of a sensor, a special electronic device and the control and visualization PC. For the acquisition of the current density distribution values, a sensor device was designed and installed within a multilayer printed circuit board with integrated shunt resistors. Varying shunt values can be taken into consideration with a newly developed and evaluated calibration method. The sensor device was integrated in a PEM fuel cell stack to prove the functionality of the whole measurement system. A software application was implemented to visualize and save the measurement values. Its functionality was verified by operational measurements within a PEMFC system. Measurement accuracy and possible negative reactions of the sensor device during PEMFC operation are discussed in detail in this paper. The developed system enables operational measurements for different operating phases of PEM fuel cells. Additionally, this can be seen as a basis for new opportunities of optimization for fuel cell design and operation modes.

  5. Bunch Current Measurement Using a High-Speed Photodetector at HLS II

    Science.gov (United States)

    Zhou, Tianyu; Yang, Yongliang; Sun, Baogen; Lu, Ping; Wu, Fangfang; Wang, Jigang; Zhou, Zeran; Luo, Qing; Wang, Qian; Li, Hao

    2017-07-01

    This paper presents a novel bunch current measurement system based on an ultrafast photodetector and a high-speed digitizer at Hefei light source II (HLS II). We use a metal-semiconductor-metal photodetector to measure the emitted optical synchrotron radiation intensity directly, representing the bunch current intensity. To achieve bunch-by-bunch resolution, the sampling rate of the system is nearly 225 GS/s, which is achieved via a dedicated equivalent sampling algorithm. The detailed description of the experimental setup and the equivalent sampling algorithm are presented. According to preliminary tests of the daily operation mode and single-bunch mode, the measured root-mean-square of the beam current is 1%, which shows that the new system satisfies the requirements for high-precision bunch current measurements. In addition, experimental results of the “HLS” Morse-code fill pattern mode demonstrate that this system could also be a convenient and robust tool for beam top-up modes in the future.

  6. A review of the current literature on aetiology and measurement methods of halitosis.

    NARCIS (Netherlands)

    Broek, A.M. van den; Feenstra, L.; Baat, C. de

    2007-01-01

    OBJECTIVES: This work reviews the current knowledge of aetiology and measurement methods of halitosis. DATA: Halitosis is an unpleasant or offensive odour emanating from the breath. The condition is multifactorial and may involve both oral and non-oral conditions. SOURCES: A private, monthly with ke

  7. Continuous measurements of discharge from a horizontal acoustic Doppler current profiler in a tidal river

    NARCIS (Netherlands)

    Hoitink, A.J.F.; Buschman, F.A.; Vermeulen, B.

    2009-01-01

    Acoustic Doppler current profilers (ADCPs) can be mounted horizontally at a river bank, yielding single-depth horizontal array observations of velocity across the river. This paper presents a semideterministic, semistochastic method to obtain continuous measurements of discharge from horizontal ADCP

  8. Simultaneous optical losses and current measurements in photovoltaic devices at variable angle of the incident light

    Energy Technology Data Exchange (ETDEWEB)

    Maddalena, P.; Tortora, P. [Universita di Napoli ' Frederico II' , Napoli (Italy). INFM, Dipartimento di Scienze Fisiche; Parretta, A. [Centro Ricerche ENEA, Portici (Italy); Altermatt, P.; Zhao, J. [University of New South Wales, Sydney (Australia). Photovoltaic Special Research Centre

    2003-02-01

    In this work, the apparatus and the method for a simultaneous measurement of the optical losses and short-circuit current in a solar cell, at variable incidence angle of the light, is presented. The method has been applied to an n{sup +}/p c-Si cell with a polished surface. The investigation has been performed over an angular range from 8{sup o} to 80{sup o}, using a linearly polarized laser beam, either normally or parallelly polarized with respect to the incidence plane. The experimental curves of reflectance seem to be in a good agreement with the theoretical ones derived from the Fresnel equations. Since the measurements are performed inside an integrating sphere, a procedure has been developed to derive, from the total current I{sup tot}, the calculated direct one, I{sub dirCal} excluding contributions from the incoming light back-diffused to the cell under investigation; the results are compared with real direct-current measurement. Since with the proposed method both reflectance and current are measured for the same surface region and under identical illumination conditions, the results have been combined to get the internal spectral response of the n{sup +}/p c-Si polished surface solar cell. (author)

  9. A review of the current literature on aetiology and measurement methods of halitosis.

    NARCIS (Netherlands)

    Broek, A.M. van den; Feenstra, L.; Baat, C. de

    2007-01-01

    OBJECTIVES: This work reviews the current knowledge of aetiology and measurement methods of halitosis. DATA: Halitosis is an unpleasant or offensive odour emanating from the breath. The condition is multifactorial and may involve both oral and non-oral conditions. SOURCES: A private, monthly with ke

  10. Measurement of critical current of superconducting materials at the changing magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Qingrong; Hu Yongchang

    1986-06-01

    In this paper we present a new method for measuring the critical current of superconductor materials. The experimental results indicate the I/sub c/(H) character of the samples rather directly and, comparing with other methods, we can get more data at the same interval.

  11. A review of the current literature on aetiology and measurement methods of halitosis.

    NARCIS (Netherlands)

    Broek, A.M. van den; Feenstra, L.; Baat, C. de

    2007-01-01

    OBJECTIVES: This work reviews the current knowledge of aetiology and measurement methods of halitosis. DATA: Halitosis is an unpleasant or offensive odour emanating from the breath. The condition is multifactorial and may involve both oral and non-oral conditions. SOURCES: A private, monthly with

  12. Calibration of Hall sensor array for critical current measurement of YBCO tape with ferromagnetic substrate

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Yunpeng; Wang, Gang; Liu, Liyuan [Key laboratory of Magnetic levitation Technologies and Maglev Trains (Ministry of Education), Superconductor and New Energy R& D Center, Mail Stop 165#, Southwest Jiaotong University, Chengdu, 610031 (China); Yang, Xinsheng, E-mail: xsyang@swjtu.edu.cn [Key laboratory of Magnetic levitation Technologies and Maglev Trains (Ministry of Education), Superconductor and New Energy R& D Center, Mail Stop 165#, Southwest Jiaotong University, Chengdu, 610031 (China); Zhao, Yong [Key laboratory of Magnetic levitation Technologies and Maglev Trains (Ministry of Education), Superconductor and New Energy R& D Center, Mail Stop 165#, Southwest Jiaotong University, Chengdu, 610031 (China); Superconductivity Research Group, School of Materials Science and Engineering, University of New South Wale, Sydney 2052, NSW (Australia)

    2015-12-15

    Abstract : HAS (Hall sensor array) is a powerful tool to detect the uniformity of HTS (high temperature superconductor) tape through mapping the distribution of remanent or shielding field along the surface of the tape. However, measurement of HTS tape with ferromagnetic parts by HSA is still an issue because the ferromagnetic substrate has influence on the magnetic field around the HTS layer. In this work, a continuous HSA system has been designed to measure the critical current of the YBCO tape with ferromagnetic substrate. The relationship between the remanent field and critical current was calibrated by the finite element method. The result showed that the HSA is an effective method for evaluating the critical current of the HTS tape with ferromagnetic substrate. - Highlight: • A continuous Hall sensor array system has been designed. • The inhomogeneity of YBCO tape with ferromagnetic substrate can be detected by HAS. • Finite element method is an effective method for calibrating the remanent field.

  13. Current Measurements in Rivers by Spaceborne Along-Track Interferometric Synthetic Aperture Radar

    Science.gov (United States)

    Romeiser, R.; Gruenler, S.; Stammer, D.

    2007-12-01

    The along-track interferometric synthetic aperture radar (along-track InSAR) technique permits a high-resolution imaging of ocean surface current fields all over the world from satellites. Results of the Shuttle Radar Topography Mission (SRTM) in early 2000 and theoretical findings indicate that spaceborne along-track InSARs are also suitable for current retrievals in rivers if the water surface is at least 200-300 m wide and sufficiently rough for microwave backscattering at slanting incidence. Accordingly, the technique is quite attractive for global river runoff monitoring, where it can complement water level and surface slope measurements by advanced radar altimeters and other efforts. The German satellite TerraSAR-X, which was launched in June 2007, will permit along-track interferometry in an experimental mode of operation. This will be the first opportunity for repeated current measurements from space at selected test sites during a period of several years. In this presentation we give an overview of basic principles and theoretical limits of current measurements by along-track InSAR, example results from SRTM, and predicted along-track InSAR capabilities of TerraSAR-X. An SRTM-derived surface current field in the lower Elbe river (Germany) agrees well with numerical hydrodynamic model results; characteristic lateral current variations around a pronounced main flow channel in the 1500 m wide river are resolved. Despite clearly suboptimal instrument parameters, TerraSAR-X simulations indicate an even better data quality. Depending on width, surface roughness, and relative flow direction of a river, current estimates with an accuracy better than 0.1 m/s will be possible with an effective spatial resolution of a few hundred meters to kilometers.

  14. Method of Measuring Common-Mode Current Conversion Coefficient for Estimating Variation in Radiated Emission from Printed Circuit Board Components

    Directory of Open Access Journals (Sweden)

    C. Ho

    2014-06-01

    Full Text Available This work describes the measurement of the common-mode current conversion coefficient for a microstrip line with solid and slotted ground planes by using a VNA with a BCI probe. The radiated emissions estimated by the common-mode current conversion coefficient are further compared with those obtained by the FAC measurements. Furthermore, the proposed method was used to estimate radiated emissions from a microstrip bandpass filter. For all of the case studies, results of electromagnetic (EM simulation demonstrate the validity of the measurement results by the proposed method. Highly promising for use in EMI measurement application, the proposed method can estimate the radiated emissions by miniaturized microstrip components on a PCB when pre-tested for compliance with EMI regulations.

  15. An Optical Fiber Sensor and Its Application in UAVs for Current Measurements

    Directory of Open Access Journals (Sweden)

    Felipe S. Delgado

    2016-10-01

    Full Text Available In this paper, we propose and experimentally investigate an optical sensor based on a novel combination of a long-period fiber grating (LPFG with a permanent magnet to measure electrical current in unmanned aerial vehicles (UAVs. The proposed device uses a neodymium magnet attached to the grating structure, which suffers from an electromagnetic force produced when the current flows in the wire of the UAV engine. Therefore, it causes deformation on the sensor and thus, different shifts occur in the resonant bands of the transmission spectrum of the LPFG. Finally, the results show that it is possible to monitor electrical current throughout the entire operating range of the UAV engine from 0 A to 10 A in an effective and practical way with good linearity, reliability and response time, which are desirable characteristics in electrical current sensing.

  16. Zinc electrowinning: anode conditioning and current distribution studies

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, J.A. [Cominco Research, Cominco Ltd., Trail, British Columbia (Canada)

    2001-07-01

    In the zinc electrowinning (EW) process, Pb-Ag anodes are widely used. Prior to their use in the EW process, anodes are conditioned to form a stable oxide layer that can evolve O{sub 2} without excessive Pb contamination of the cathode and MnO{sub 2} precipitation. The most widely used conditioning techniques are: passivation in a KF-H{sub 2}SO{sub 4} electrolysis bath, chemical oxidation in a KMnO{sub 4}-H{sub 2}SO{sub 4} solution, and sandblasting. In this paper, a comparison of these treatments using flat and corrugated anodes is presented. Laboratory and industrial-scale tests carried out at Cominco's Trail and Cajamarquilla zinc plants indicated that flat anodes should be sandblasted or electrochemically passivated before their use in the Zn electrowinning process. Further, corrugated anodes should be sandblasted or chemically conditioned in a KMnO{sub 4}-H{sub 2}SO{sub 4} -electrolyte. The beneficial effects of chemical conditioning are lost if the anode is non-corrugated. Flat, chemically conditioned anodes generate up to 10 times more mud than corrugated-chemically conditioned anodes. Because anode mud growth is evenly distributed on sandblasted anodes, short-circuit frequency may decrease and anode life may increase. Sandblasting does not appear to affect anode performance. Parallel to the industrial anode conditioning tests, current distribution measurements were made. Current flow measurements were used to correct troublesome electrodes and/or bad electrical contacts. In Cajamarquilla, this technique was used in four industrial electrowinning cells and energy consumption values lower than 3000 kWh/t Zn were obtained at current efficiencies as high as 95% and at current densities up to 450 A/m{sup 2}. (author)

  17. Thickness measurement of multi-layer conductive coatings using multifrequency eddy current techniques

    Science.gov (United States)

    Zhang, Dejun; Yu, Yating; Lai, Chao; Tian, Guiyun

    2016-07-01

    To ensure the key structural performance in high-temperature and high-stress environments, thermal barrier coatings (TBCs) are often adopted in engineering. The thickness of these multi-layer conductive coatings is an important quality indicator. In order to measure the thickness of multi-layer conductive coatings, a new measurement approach is presented using eddy current testing techniques, and then, an inversion algorithm is proposed and proved efficient and applicable, of which the maximum experimental relative error is within 10%. Therefore, the new approach can be effectively applied to thickness measurement of multi-layer conductive coatings such as TBCs.

  18. Measuring currents in submarine canyons: technological and scientific progress in the past 30 years

    Science.gov (United States)

    Xu, J. P.

    2011-01-01

    The development and application of acoustic and optical technologies and of accurate positioning systems in the past 30 years have opened new frontiers in the submarine canyon research communities. This paper reviews several key advancements in both technology and science in the field of currents in submarine canyons since the1979 publication of Currents in Submarine Canyons and Other Sea Valleys by Francis Shepard and colleagues. Precise placements of high-resolution, high-frequency instruments have not only allowed researchers to collect new data that are essential for advancing and generalizing theories governing the canyon currents, but have also revealed new natural phenomena that challenge the understandings of the theorists and experimenters in their predictions of submarine canyon flow fields. Baroclinic motions at tidal frequencies, found to be intensified both up canyon and toward the canyon floor, dominate the flow field and control the sediment transport processes in submarine canyons. Turbidity currents are found to frequently occur in active submarine canyons such as Monterey Canyon. These turbidity currents have maximum speeds of nearly 200 cm/s, much smaller than the speeds of turbidity currents in geological time, but still very destructive. In addition to traditional Eulerian measurements, Lagrangian flow data are essential in quantifying water and sediment transport in submarine canyons. A concerted experiment with multiple monitoring stations along the canyon axis and on nearby shelves is required to characterize the storm-trigger mechanism for turbidity currents.

  19. Surface current dynamics under sea breeze conditions observed by simultaneous HF radar, ADCP and drifter measurements

    Science.gov (United States)

    Sentchev, Alexei; Forget, Philippe; Fraunié, Philippe

    2017-02-01

    Ocean surface boundary layer dynamics off the southern coast of France in the NW Mediterranean is investigated by using velocity observations by high-frequency (HF) radars, surface drifting buoys and a downward-looking drifting acoustic Doppler current profiler (ADCP). The analysis confirms that velocities measured by HF radars correspond to those observed by an ADCP at the effective depth z f = k -1, where k is wavenumber of the radio wave emitted by the radar. The radials provided by the radars were in a very good agreement with in situ measurements, with the relative errors of 1 and 9 % and root mean square (RMS) differences of 0.02 and 0.04 m/s for monostatic and bistatic radar, respectively. The total radar-based velocities appeared to be slightly underestimated in magnitude and somewhat biased in direction. At the end of the survey period, the difference in the surface current direction, based on HF radar and ADCP data, attained 10°. It was demonstrated that the surface boundary layer dynamics cannot be reconstructed successfully without taking into the account velocity variation with depth. A significant misalignment of ˜30° caused by the sea breeze was documented between the HF radar (HFR-derived) surface current and the background current. It was also found that the ocean response to a moderate wind forcing was confined to the 4-m-thick upper layer. The respective Ekman current attained the maximum value of 0.15 m/s, and the current rotation was found to be lagging the wind by approximately 40 min, with the current vector direction being 15-20° to the left of the wind. The range of velocity variability due to wind forcing was found comparable with the magnitude of the background current variability.

  20. Results of many-year subsatellite measurements of current fine structure in northeastern Black Sea

    Science.gov (United States)

    Lavrova, Olga; Krayushkin, Evgeny; Kalashnikova, Nina

    Results of subsatellite measurements of coastal currents in the shelf zone of northeastern Black Sea are presented. The measurements have been performed every year since 2006 in June and September-October months near the Gelendzhik Bay. The main instruments used are Acoustic Doppler Current Profilers (ADCP) and CTD probes. Ground and ship measurements were conducted simultaneously with satellite imaging in microwave (ASAR Envisat, ERS-2, RADARSAT-2, TerraSAR-X), visible and infrared (OLI Landsat-8, ETM+ Landsat-7, TM Landsat-5, MODIS Terra/Aqua, AVHRR NOAA) ranges. The investigations performed revealed spatial, depth and temporal variability of current direction and velocity in the shelf zone. Multiple instances of counter-currents opposing to the Ring Current were registered. In our view, they are associated with a passage of small-scale anticyclonic eddies across the region of interest. The 3D structure of the eddies in the upper quasi-uniform layer was analyzed based on ADCP data. The use of high resolution (3 m) SAR data in combination with ADCP measurements at the resolution of 0.5 m allowed us to detect a number of internal wave trains. Form ADCP and thermistors records, their amplitudes were estimated to reach 5-8 m. Joint analysis of satellite SAR and subsatellite data gave an assessment of their typical wavelength at 90-100 m. Generation mechanisms of these internal waves are suggested. Another phenomenon of interest observed in the region of the measurements is surface manifestations of ring waves near localized natural and anthropogenic generation sources. Such ring waves are most frequently found in the anchor area for ships, whose oscillations can be the source of their generation. The work was in part supported by the Russian Foundation for Basic Research (projects #14-05-00520-а, and 13-07-12017-ofi_m). SAR data from RADARSAT-2 and TerraSAR-X were obtained under SOAR RADARSAT-2/TerraSAR-X Project #5074.

  1. Study on Fault Current of DFIG during Slight Fault Condition

    Directory of Open Access Journals (Sweden)

    Xiangping Kong

    2013-04-01

    Full Text Available In order to ensure the safety of DFIG when severe fault happens, crowbar protection is adopted. But during slight fault condition, the crowbar protection will not trip, and the DFIG is still excited by AC-DC-AC converter. In this condition, operation characteristics of the converter have large influence on the fault current characteristics of DFIG. By theoretical analysis and digital simulation, the fault current characteristics of DFIG during slight voltage dips are studied. And the influence of controller parameters of converter on the fault current characteristics is analyzed emphatically. It builds a basis for the construction of relay protection which is suitable for the power gird with accession of DFIG.

  2. Eddy Current Modeling and Measuring in Fast-Pulsed Resistive Magnets

    CERN Document Server

    Arpaia, P; Gollucio, G; Montenero, G

    2010-01-01

    A method for modeling and measuring electromagnetic transients due to eddy currents in fast-pulsed resistive magnets is proposed. In particular, an equivalent-circuit model and a method for time-domain measurements of eddy currents are presented. The measurements are needed for an accurate control of the magnetic field quality to ensure adequate stability and performance of the particle beam in particle accelerators in dynamic conditions (field ramps up to about 700 T/s). In the second part, the results of experiments for model definition, identification, and validation are discussed. The tests were carried out on a quadrupole of Linac4, a new linear particle accelerator under construction at CERN (European Organization for Nuclear Research).

  3. MEMS sensor for in situ TEM-nanoindentation with simultaneous force and current measurements

    Science.gov (United States)

    Nafari, A.; Angenete, J.; Svensson, K.; Sanz-Velasco, A.; Enoksson, P.

    2010-06-01

    A capacitive force sensor for in situ transmission electron microscope (TEM)-nanoindentation with simultaneous force and current measurement has been developed. The sensor was fabricated using bulk micro machining methods such as deep reactive ion etch, thermal oxidation, metal deposition and anodic bonding. Two different geometries of the sensor were designed to allow in situ TEM electromechanical experiments in the most common TEM instruments. Electrical probing is enabled by an on-chip insulator, electrically separating the indenter tip and the capacitor used for force measurements. The sensor was designed for the force range of 0 to 4.5 mN. Finally, we demonstrate for the first time in situ TEM-nanoindentation with simultaneous force and current measurements.

  4. 10 Orders of Magnitude Current Measurement Digitisers for the CERN Beam Loss Systems

    CERN Document Server

    Vigano, W; Dehning, B; Kwiatkowski, M; Venturini, G G; Zamantzas, C

    2014-01-01

    A wide range current digitizer card is needed for the acquisition module of the beam loss monitoring systems in the CERN Injector Complex. The fully differential frequency converter allows measuring positive and negative input currents with a resolution of 31nA in an integration window of 2μs. Increasing the integration window, the dynamic range covers 2•1010 were the upper part of the range is converted by measuring directly the voltage drop on a resistor. The key elements of this design are the fully differential integrator and the switches operated by an FPGA. The circuit is designed to avoid any dead time in the acquisition and reliability and failsafe operational considerations are main design goals. The circuit will be discussed in detail and lab and field measurements will be shown.

  5. 10 orders of magnitude current measurement digitisers for the CERN beam loss systems

    Science.gov (United States)

    Viganò, W.; Alsdorf, M.; Dehning, B.; Kwiatkowski, M.; Venturini, G. G.; Zamantzas, C.

    2014-02-01

    A wide range current digitizer card is needed for the acquisition module of the beam loss monitoring systems in the CERN Injector Complex. The fully differential frequency converter allows measuring positive and negative input currents with a resolution of 31 nA in an integration window of 2 μs. Increasing the integration window, the dynamic range covers 21010 were the upper part of the range is converted by measuring directly the voltage drop on a resistor. The key elements of this design are the fully differential integrator and the switches operated by an FPGA. The circuit is designed to avoid any dead time in the acquisition and reliability and failsafe operational considerations are main design goals. The circuit will be discussed in detail and lab and field measurements will be shown.

  6. Measurement of bubble and pellet size distributions: past and current image analysis technology.

    Science.gov (United States)

    Junker, Beth

    2006-08-01

    Measurements of bubble and pellet size distributions are useful for biochemical process optimizations. The accuracy, representation, and simplicity of these measurements improve when the measurement is performed on-line and in situ rather than off-line using a sample. Historical and currently available measurement systems for photographic methods are summarized for bubble and pellet (morphology) measurement applications. Applications to cells, mycelia, and pellets measurements have driven key technological developments that have been applied for bubble measurements. Measurement trade-offs exist to maximize accuracy, extend range, and attain reasonable cycle times. Mathematical characterization of distributions using standard statistical techniques is straightforward, facilitating data presentation and analysis. For the specific application of bubble size distributions, selected bioreactor operating parameters and physicochemical conditions alter distributions. Empirical relationships have been established in some cases where sufficient data have been collected. In addition, parameters and conditions with substantial effects on bubble size distributions were identified and their relative effects quantified. This information was used to guide required accuracy and precision targets for bubble size distribution measurements from newly developed novel on-line and in situ bubble measurement devices.

  7. Calorimetric apparatus for alternating current loss measurements on high-temperature superconductors

    Science.gov (United States)

    Magnusson, N.; Hörnfeldt, S.

    1998-09-01

    The use of high-temperature superconductors in electric power components requires the knowledge of their alternating current (ac) losses. Methods are therefore needed to characterize the conductors with respect to their ac losses under applicationlike conditions. In this article we describe a calorimetric setup for ac loss measurements on long length high-temperature superconductors carrying ac transport currents in ac external magnetic fields at variable temperatures. The variable temperature is achieved by a thermal connection between the sample and a cooling machine. Current in copper coils generates the magnetic field parallel to the plane of the tape and perpendicular to the transport current. This current can be induced in the coil-formed sample. Two slightly different methods are used to determine the ac losses, one in which the temperature rise of the sample, caused by the ac losses, is compared to the temperature rise caused by a reference heater and another in which the increase in power dissipation of the sample is compensated for by a reduction of the power dissipation in the heater. Typical results of the ac loss measurements are presented.

  8. PCB current identification based on near-field measurements using preconditioning and regularization

    Science.gov (United States)

    Rinas, Denis; Ahl, Patrick; Frei, Stephan

    2016-09-01

    Radiated electromagnetic fields from a PCB can be estimated when the source current distribution is known. From a measured near-field distribution, the PCB source current distribution can be found. Accuracy depends on the measurement method and its limitations, the radiation model and the choice of the observation area. Many known methods are based on optimization algorithms for inverse problems that vary a set of elementary radiation sources and create a radiation model. However, apart from the time-consuming optimization process, such methods find one possible solution for a near-field distribution. As this distribution might not reflect the real current distribution, accuracy outside of near-field scan area can be low. Furthermore numerical problems can often be observed. Solving the given inverse problem with a system of linear equations and complex near-field data it can be very sensitive to noise. Regularization methods and an adjusted preconditioning can increase the accuracy. In this paper, an improved radiation model creation approach based on complex near-field data is presented. This approach is based on regularization methods and extended by current estimations from near-field data. Preconditioning is done considering some physical properties of the PCB and its possible current paths. Accuracy and stability of the method are investigated in the presence of noisy data.

  9. A 155-dB Dynamic Range Current Measurement Front End for Electrochemical Biosensing.

    Science.gov (United States)

    Dai, Shanshan; Perera, Rukshan T; Yang, Zi; Rosenstein, Jacob K

    2016-10-01

    An integrated current measurement system with ultra wide dynamic range is presented and fabricated in a 180-nm CMOS technology. Its dual-mode design provides concurrent voltage and frequency outputs, without requiring an external clock source. An integrator-differentiator core provides a voltage output with a noise floor of 11.6 fA/ [Formula: see text] and a -3 dB cutoff frequency of 1.4 MHz. It is merged with an asynchronous current-to-frequency converter, which generates an output frequency linearly proportional to the input current. Together, the voltage and frequency outputs yield a current measurement range of 155 dB, spanning from 204 fA (100 Hz) or 1.25 pA (10 kHz) to 11.6 μA. The proposed architecture's low noise, wide bandwidth, and wide dynamic range make it ideal for measurements of highly nonlinear electrochemical and electrophysiological systems.

  10. Measurement of the Muon Neutrino Inclusive Charged Current Cross Section on Iron using the MINOS Detector

    Energy Technology Data Exchange (ETDEWEB)

    Loiacono, Laura Jean [Univ. of Texas, Austin, TX (United States)

    2010-05-01

    The Neutrinos at the Main Injector (NuMI) facility at Fermi National Accelerator Laboratory (FNAL) produces an intense muon neutrino beam used by the Main Injector Neutrino Oscillation Search (MINOS), a neutrino oscillation experiment, and the Main INjector ExpeRiment v-A, (MINERv A), a neutrino interaction experiment. Absolute neutrino cross sections are determined via σv = N vv , where the numerator is the measured number of neutrino interactions in the MINOS Detector and the denominator is the flux of incident neutrinos. Many past neutrino experiments have measured relative cross sections due to a lack of precise measurements of the incident neutrino flux, normalizing to better established reaction processes, such as quasielastic neutrino-nucleon scattering. But recent measurements of neutrino interactions on nuclear targets have brought to light questions about our understanding of nuclear effects in neutrino interactions. In this thesis the vμ inclusive charged current cross section on iron is measured using the MINOS Detector. The MINOS detector consists of alternating planes of steel and scintillator. The MINOS detector is optimized to measure muons produced in charged current vμ interactions. Along with muons, these interactions produce hadronic showers. The neutrino energy is measured from the total energy the particles deposit in the detector. The incident neutrino flux is measured using the muons produced alongside the neutrinos in meson decay. Three ionization chamber monitors located in the downstream portion of the NuMI beamline are used to measure the muon flux and thereby infer the neutrino flux by relation to the underlying pion and kaon meson flux. This thesis describes the muon flux instrumentation in the NuMI beam, its operation over the two year duration of this measurement, and the techniques used to derive the neutrino flux.

  11. Measurement of the Muon Neutrino Inclusive Charged Current Cross Section on Iron using the MINOS Detector

    Energy Technology Data Exchange (ETDEWEB)

    Loiacono, Laura Jean [Univ. of Texas, Austin, TX (United States)

    2010-05-01

    The Neutrinos at the Main Injector (NuMI) facility at Fermi National Accelerator Laboratory (FNAL) produces an intense muon neutrino beam used by the Main Injector Neutrino Oscillation Search (MINOS), a neutrino oscillation experiment, and the Main INjector ExpeRiment v-A, (MINERv A), a neutrino interaction experiment. Absolute neutrino cross sections are determined via σv = N vv , where the numerator is the measured number of neutrino interactions in the MINOS Detector and the denominator is the flux of incident neutrinos. Many past neutrino experiments have measured relative cross sections due to a lack of precise measurements of the incident neutrino flux, normalizing to better established reaction processes, such as quasielastic neutrino-nucleon scattering. But recent measurements of neutrino interactions on nuclear targets have brought to light questions about our understanding of nuclear effects in neutrino interactions. In this thesis the vμ inclusive charged current cross section on iron is measured using the MINOS Detector. The MINOS detector consists of alternating planes of steel and scintillator. The MINOS detector is optimized to measure muons produced in charged current vμ interactions. Along with muons, these interactions produce hadronic showers. The neutrino energy is measured from the total energy the particles deposit in the detector. The incident neutrino flux is measured using the muons produced alongside the neutrinos in meson decay. Three ionization chamber monitors located in the downstream portion of the NuMI beamline are used to measure the muon flux and thereby infer the neutrino flux by relation to the underlying pion and kaon meson flux. This thesis describes the muon flux instrumentation in the NuMI beam, its operation over the two year duration of this measurement, and the techniques used to derive the neutrino flux.

  12. Application of the Multi-Peaked Analytically Extended Function to Representation of Some Measured Lightning Currents

    CERN Document Server

    Lundengård, Karl; Javor, Vesna; Silvestrov, Sergei

    2016-01-01

    A multi-peaked form of the analytically extended function (AEF) is used for approximation of lightning current waveforms in this paper. The AEF function's parameters are estimated using the Marquardt least-squares method (MLSM), and the general procedure for fitting the $p$-peaked AEF function to a waveform with an arbitrary (finite) number of peaks is briefly described. This framework is used for obtaining parameters of 2-peaked waveforms typically present when measuring first negative stroke currents. Advantages, disadvantages and possible improvements of the approach are also discussed.

  13. First Measurement of the Muon Neutrino Charged Current Quasielastic Double Differential Cross Section

    CERN Document Server

    Aguilar-Arevalo, A A; Bazarko, A O; Brice, S J; Brown, B C; Bugel, L; Cao, J; Coney, L; Conrad, J M; Cox, D C; Curioni, A; Djurcic, Z; Finley, D A; Fleming, B T; Ford, R; Garcia, F G; Garvey, G T; Grange, J; Green, C; Green, J A; Hart, T L; Hawker, E; Imlay, R; Johnson, R A; Karagiorgi, G; Kasper, P; Katori, T; Kobilarcik, T; Kourbanis, I; Koutsoliotas, S; Laird, E M; Linden, S K; Link, J M; Liu, Y; Liu, Y; Louis, W C; Mahn, K B M; Marsh, W; Mauger, C; McGary, V T; McGregor, G; Metcalf, W; Meyers, P D; Mills, F; Mills, G B; Monroe, J; Moore, C D; Mousseau, J; Nelson, R H; Nienaber, P; Nowak, J A; Osmanov, B; Ouedraogo, S; Patterson, R B; Pavlovic, Z; Perevalov, D; Polly, C C; Prebys, E; Raaf, J L; Ray, H; Roe, B P; Russell, A D; Sandberg, V; Schirato, R; Schmitz, D; Shaevitz, M H; Shoemaker, F C; Smith, D; Soderberg, M; Sorel, M; Spentzouris, P; Spitz, J; Stancu, I; Stefanski, R J; Sung, M; Tanaka, H A; Tayloe, R; Tzanov, M; Van de Water, R G; Wascko, M O; White, D H; Wilking, M J; Yang, H J; Zeller, G P; Zimmerman, E D

    2010-01-01

    A high-statistics sample of charged-current muon neutrino scattering events collected with the MiniBooNE experiment is analyzed to extract the first measurement of the double differential cross section ($\\frac{d^2\\sigma}{dT_\\mu d\\cos\\theta_\\mu}$) for charged-current quasielastic (CCQE) scattering on carbon. This result features minimal model dependence and provides the most complete information on this process to date. With the assumption of CCQE scattering, the absolute cross section as a function of neutrino energy ($\\sigma[E_\

  14. Modeling of stored charge in metallized biaxially oriented polypropylene film capacitors based on charging current measurement

    Science.gov (United States)

    Li, Hua; Wang, Bowen; Li, Zhiwei; Liu, De; Lin, Fuchang; Dai, Ling; Zhang, Qin; Chen, Yaohong

    2013-10-01

    Metallized biaxially oriented polypropylene film (BOPP) capacitors are widely used in pulsed power systems. When the capacitor is used as the energy storage equipment under high electric field, more charges should be provided to maintain the voltage of the capacitor. This should be ascribed to the completion of the slow polarization which may take several hours or even longer. This paper focuses on the stored charge in metallized BOPP film capacitors. The modeling of the stored charge by the equivalent conversion of circuits is conducted to analyse the slow polarization in the BOPP film. The 3-RC network is proposed to represent the time-dependent charge stored in the capacitor. A charging current measurement system is established to investigate the charge storage property of the capacitor. The measurement system can measure the long time charging current with a sampling rate of 300Hz. The total charge calculated by the charging current indicates that the stored charge in the capacitor under the electric field of 400 V/μm is 13.5% larger than the product of the voltage and the capacitance measured by the AC bridge. The nonlinear effect of the electric field on the slow polarization charge is also demonstrated. And the simulation of charge storage based on the 3-RC network can match well with the trend of the stored charge increasing with the time.

  15. The methodologies and instruments of vehicle particulate emission measurement for current and future legislative regulations

    Science.gov (United States)

    Otsuki, Yoshinori; Nakamura, Hiroshi; Arai, Masataka; Xu, Min

    2015-09-01

    Since the health risks associated with fine particles whose aerodynamic diameters are smaller than 2.5 μm was first proven, regulations restricting particulate matter (PM) mass emissions from internal combustion engines have become increasingly severe. Accordingly, the gravimetric method of PM mass measurement is facing its lower limit of detection as the emissions from vehicles are further reduced. For example, the variation in the adsorption of gaseous components such as hydrocarbons from unburned fuel and lubricant oil and the presence of agglomerated particles, which are not directly generated in engine combustion but re-entrainment particulates from walls of sampling pipes, can cause uncertainty in measurement. The PM mass measurement systems and methodologies have been continuously refined in order to improve measurement accuracy. As an alternative metric, the particle measurement programme (PMP) within the United Nations Economic Commission for Europe (UNECE) developed a solid particle number measurement method in order to improve the sensitivity of particulate emission measurement from vehicles. Consequently, particle number (PN) limits were implemented into the regulations in Europe from 2011. Recently, portable emission measurement systems (PEMS) for in-use vehicle emission measurements are also attracting attention, currently in North America and Europe, and real-time PM mass and PN instruments are under evaluation.

  16. A Long-term Ring Current Measure Created by Using the VMO MANGO Service Package

    Science.gov (United States)

    Bargatze, L. F.; King, T. A.

    2008-12-01

    A set of computational routines called MANGO (Magnetogram Analysis for the Network of Geomagnetic Observatories) is utilized to calculate a new measure of magnetic storm activity for the years 1932 to the near present. The MANGO routines are part of an effort to enhance data services available to users of the Heliophysics VxOs, specifically for the Virtual Magnetospheric Observatory (VMO). The community can utilize MANGO to derive value-added data products and images suitable for publication via the VMO web site. MANGO routines will be demonstrated through their application to study magnetic storms, a field of research that began in 1828 when von Humboldt launched an investigation of observations taken simultaneously from magnetic field stations spread around the Earth. The defining signature of magnetic storms is a worldwide decrease of the horizontal component of the magnetic field caused by fluctuations in the strength of the ring current. In the 1940's, Bartel pushed for deriving an index to measure the strength of magnetic storms. Progress intensified during the International Geophysical Year leading to the definition of the Dst index. The definitive Dst index is calculated at WDC-C2 for Geomagnetism in Kyoto by using a derivation scheme certified by Division V of IAGA. The Dst index time series spans the years 1957 to present with a cadence equal to 1-hr. The new data set we will present is a magnetic storm measure that is similar to the Dst index though it is calculated by using MANGO and a method that differs slightly from the official scheme. The MANGO data service package is based on a set of IDL routines that decompose ground magnetic field observations to isolate secular, diurnal, and disturbance variations of the magnetic field station-by-station. Each MANGO subroutine has been written in modular fashion to allow "plug and play"- style flexibility and each has been designed to account for failure modes and noisy data so that the programs will run to

  17. Dark current measurements at field gradients above 1 GV/m

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan-Rao, T.; Smedley, J.; Schill, J. [Brookhaven National Lab., Upton, NY (United States); Batchelor, K.; Farrell, J.P. [Brookhaven Technology Group Inc., Stony Brook, NY (United States)

    1998-07-01

    In this paper, the authors report the results of dark current studies on copper cathodes and stainless steel anodes held at a field gradient > 1 GV/m. The field emission current is , 1 A for fields less than 1 GV/m. As the field is increased, the dark current increases rapidly to 150 A for applied fields of {approximately} 1.7 GV/m. Fowler-Nordheim plots in this range of applied fields indicate a field enhancement factor of 10--20 for a copper cathode with a work function of 4.6 eV.

  18. Current methods for studying dynamic processes in the ionosphere

    Science.gov (United States)

    Filipp, Nikolai D.; Blaunshtein, Natan Sh.; Erukhimov, Lev M.; Ivanov, Vladimir A.; Uriadov, Valerii P.

    Current experimental and theoretical data relevant to the study of dynamic processes in the ionospheric plasma using state-of-the-art methods are summarized. The methods used include linear FM sounding, partial radio wave reflection, oblique-incidence radio wave scattering, radio wave heating of the ionosphere, plasma injection, and computer simulation of physical processes. For each specific method, experimental data are compared against theoretical predictions and numerical calculations.

  19. Pancreatic exocrine studies in intact animals: historic and current methods.

    Science.gov (United States)

    Niebergall-Roth, E; Teyssen, S; Singer, M V

    1997-12-01

    This report presents a review of the historic and current methods for performing pancreatic exocrine studies in intact animals. Special emphasis is given to the various surgical procedures--pancreatic fistulas, duodenal pouches, and duodenal fistulas--and practice of collecting pancreatic secretion in dogs. Procedures in other animal species--rat, cat, pig, rabbit, cattle, sheep, and horse--also are specified. The advantages and disadvantages, as well as the indications and limitations of the distinct methods, are discussed.

  20. Variable Temperature Current-Voltage Measurements of CdTe Solar Cells

    Science.gov (United States)

    Smith, A. D.

    2000-03-01

    We have used a 2" x 2" Peltier heat pump chip powered with 24 V from a computer power supply to build a variable temperature stage for current voltage measurements of solar cells. A voltage divider was used to achieve several different set point temperatures from 25 oC to -24 oC. This system was used with a halogen lamp to study the electrical performance of polycrystalline thin-film solar cells fabricated in our group. These cells have the superstrate structure glass/SnO2:F/CdS/CdTe/metal.(1) The I-V characteristic shows evidence of a blocking back-diode which sets in below room temperature. This behavior will be related to the diffusion into the CdTe of the metals used for our back contact.(2) 1. M. Shao, A. Fischer, D. Grecu, U. Jayamaha, E. Bykov, G. Contreras-Puente, R.G. Bohn, and A.D. Compaan, Appl. Phys. Lett. 69, 3045-3047 (1996). 2. D. Grecu and A.D. Compaan, Appl. Phys. Lett. 75, 361-363 (1999).

  1. Field Measurements at River and Tidal Current Sites for Hydrokinetic Energy Development: Best Practices Manual

    Energy Technology Data Exchange (ETDEWEB)

    Neary, Vincent S [ORNL; Gunawan, Budi [Oak Ridge National Laboratory (ORNL)

    2011-09-01

    In this report, existing data collection techniques and protocols for characterizing open channel flows are reviewed and refined to further address the needs of the MHK industry. The report provides an overview of the hydrodynamics of river and tidal channels, and the working principles of modern acoustic instrumentation, including best practices in remote sensing methods that can be applied to hydrokinetic energy site characterization. Emphasis is placed upon acoustic Doppler velocimeter (ADV) and acoustic-Doppler current profiler (ADCP) instruments, as these represent the most practical and economical tools for use in the MHK industry. Incorporating the best practices as found in the literature, including the parameters to be measured, the instruments to be deployed, the instrument deployment strategy, and data post-processing techniques. The data collected from this procedure aims to inform the hydro-mechanical design of MHK systems with respect to energy generation and structural loading, as well as provide reference hydrodynamics for environmental impact studies. The standard metrics and protocols defined herein can be utilized to guide field experiments with MHK systems.

  2. Measuring ac losses in superconducting cables using a resonant circuit:Resonant current experiment (RESCUE)

    DEFF Research Database (Denmark)

    Däumling, Manfred; Olsen, Søren Krüger; Rasmussen, Carsten;

    1998-01-01

    be recorded using, for example, a digital oscilloscope. The amplitude decay of the periodic voltage or current accurately reflects the power loss in the system. It consists of two components-an ohmic purely exponential one (from leads, contacts, etc.), and a nonexponential component originating from......A simple way to obtain true ac losses with a resonant circuit containing a superconductor, using the decay of the circuit current, is described. For the measurement a capacitor is short circuited with a superconducting cable. Energy in the circuit is provided by either charging up the capacitors...... with a certain voltage, or letting a de flow in the superconductor. When the oscillations are started-either by opening a switch in case a de is flowing or by closing a switch to connect the charged capacitors with the superconductor-the current (via a Rogowski coil) or the voltage on the capacitor can...

  3. Pulsed eddy current and ultrasonic data fusion applied to stress measurement

    Science.gov (United States)

    Habibalahi, A.; Safizadeh, M. S.

    2014-05-01

    Stress measurement and its variation are key problems in the operating performance of materials. Stress can affect the material properties and the life of components. There are several destructive and nondestructive techniques that are used to measure stress. However, no single nondestructive testing (NDT) technique or method is satisfactory to fully assess stress. This paper presents an NDT data fusion method to improve stress measurement. An aluminum alloy 2024 specimen subjected to stress simulation is nondestructively inspected using pulsed eddy current and ultrasonic techniques. Following these nondestructive examinations, the information gathered from these two NDT methods has been fused using a suitable fuzzy combination operator. The results obtained with these processes are presented in this paper and their efficiency is discussed. It is shown that the fusion of NDT data with a suitable fuzzy operator can be adequate to improve the reliability of stress measurements.

  4. The current status of continuous noninvasive measurement of total, carboxy, and methemoglobin concentration.

    Science.gov (United States)

    Shamir, Micha Y; Avramovich, Aharon; Smaka, Todd

    2012-05-01

    Intraoperative early detection of anemia, identifying toxic levels of carboxyhemoglobin after carbon monoxide exposure and titrating drug dosage to prevent toxic levels of methemoglobin are important goals. The pulse oximeter works by illuminating light into the tissue and sensing the amount of light absorbed. The same methodology is used by laboratory hemoglobinometers to measure hemoglobin concentration. Because both devices work in the same way, efforts were made to modify the pulse oximeter to also measure hemoglobin concentration. Currently there are 2 commercial pulse oximeters (Masimo Rainbow SET and OrSense NBM-200MP) that measure total hemoglobin concentration and one (Masimo) that also measures methemoglobin and carboxyhemoglobin. In this review, we describe the peer-reviewed literature addressing the accuracy of these monitors.

  5. Collectivism and coping: current theories, evidence, and measurements of collective coping.

    Science.gov (United States)

    Kuo, Ben C H

    2013-01-01

    A burgeoning body of cultural coping research has begun to identify the prevalence and the functional importance of collective coping behaviors among culturally diverse populations in North America and internationally. These emerging findings are highly significant as they evidence culture's impacts on the stress-coping process via collectivistic values and orientation. They provide a critical counterpoint to the prevailing Western, individualistic stress and coping paradigm. However, current research and understanding about collective coping appear to be piecemeal and not well integrated. To address this issue, this review attempts to comprehensively survey, summarize, and evaluate existing research related to collective coping and its implications for coping research with culturally diverse populations from multiple domains. Specifically, this paper reviews relevant research and knowledge on collective coping in terms of: (a) operational definitions; (b) theories; (c) empirical evidence based on studies of specific cultural groups and broad cultural values/dimensions; (d) measurements; and (e) implications for future cultural coping research. Overall, collective coping behaviors are conceived as a product of the communal/relational norms and values of a cultural group across studies. They also encompass a wide array of stress responses ranging from value-driven to interpersonally based to culturally conditioned emotional/cognitive to religion- and spirituality-grounded coping strategies. In addition, this review highlights: (a) the relevance and the potential of cultural coping theories to guide future collective coping research; (b) growing evidence for the prominence of collective coping behaviors particularly among Asian nationals, Asian Americans/Canadians and African Americans/Canadians; (c) preference for collective coping behaviors as a function of collectivism and interdependent cultural value and orientation; and (d) six cultural coping scales. This

  6. Measurement of the Neutrino Neutral-Current Elastic Differential Cross Section

    CERN Document Server

    ,

    2010-01-01

    We report a measurement of the flux-averaged neutral-current elastic differential cross section for neutrinos scattering on mineral oil (CH$_2$) as a function of four-momentum transferred squared. It is obtained by measuring the kinematics of recoiling nucleons with kinetic energy greater than 50~MeV which are readily detected in MiniBooNE. This differential cross-section distribution is fit with fixed nucleon form factors apart from an axial mass, $M_{A}$, that provides a best fit for $M_A= 1.39\\pm0.11$~GeV. Additionally, single protons with kinetic energies above 350 MeV can be distinguished from neutrons and multiple nucleon events. Using this marker, the strange quark contribution to the neutral-current axial vector form factor at $Q^2 = 0$, $\\Delta s$, is found to be $\\Delta s=0.08\\pm0.26$.

  7. Strategic Petroleum Reserve equation of state model development : current performance against measured data.

    Energy Technology Data Exchange (ETDEWEB)

    Lord, David L.; Rudeen, David Keith (GRAM, Inc., Albuquerque, NM)

    2010-07-01

    This report documents the progression of crude oil phase behavior modeling within the U.S. Strategic Petroleum Reserve vapor pressure program during the period 2004-2009. Improvements in quality control on phase behavior measurements in 2006 coupled with a growing body of degasification plant operations data have created a solid measurement baseline that has served to inform and significantly improve project understanding on phase behavior of SPR oils. Systematic tuning of the model based on proven practices from the technical literature have shown to reduce model bias and match observed data very well, though this model tuning effort is currently in process at SPR and based on preliminary data. The current report addresses many of the steps that have helped to build a strong baseline of data coupled with sufficient understanding of model features so that calibration is possible.

  8. Drift chamber electronics with multi-hit capability for time and current division measurements

    Energy Technology Data Exchange (ETDEWEB)

    Manarin, A.; Pregernig, L.; Rabany, M.; Saban, R.; Vismara, G.

    1983-11-15

    Drift chambers have been installed for luminosity measurements in intersection 5 of the SPS accelerator working in panti p colliding mode. The required electronics is described. The system is able to process up to 16 hits per wire with a double pulse resolution of 40 ns; drift time and current division, with 1.25 ns and 1.6% resolution respectively, are recorded. Transconductance preamplifiers and discriminators are directly mounted on the chamber; 160 m of twisted-apir cable bring the signals to the digitizer unit. Coarse time is measured using RAM techniques, while fine time is obtained by means of a microstrip delay associated with a 100 K ECL priority encoder. Current division used a single 50 MHz Flash ADC which alows 26 dB dynamic range with 6 bit resolution. First operational results are reported.

  9. A Symbolic Measure of Authoritarianism: An Exploratory Study

    Science.gov (United States)

    Hogan, H. Wayne

    1970-01-01

    Hypothesizes that the personality dimension of authoritarianism can be measured by means of symbols just as well as it is currently measured by Adorno's verbal F-scale. Pilot study confirms symbolic test of intolerance of ambiguity resulted in positive correlation. (Author/DB)

  10. Wide dynamic range 500 fA sensitivity current measurement instrument

    Directory of Open Access Journals (Sweden)

    Pelemeshko Anatoly

    2017-01-01

    Full Text Available Main technical features of Low Energy Charged Particle Sensor (LECPS are described, taking into account LECPS high sensitivity, wide dynamic range, and conditions of in-flight operation on-board a satellite. LECPS input cascade is capable of current measurement as low as 1 pA within a 120 dB dynamic range, providing error level below 20%. Statistical calculations of acquired data, measuring time considerations and implementation of input cascade auto-calibration technique were applied to gain the best possible stability and accuracy over −20° to +50°C operation temperature.

  11. Critical report of current fisheries management measures implemented for the North Sea mixed demersal fisheries

    DEFF Research Database (Denmark)

    Nielsen, J. Rasmus; Ulrich, Clara; Hegland, Troels J.

    The present report is an EU-FP7-SOCIOEC Report giving an overview and critical evaluation of the current management measures implemented for the North Sea mixed demersal fisheries and the fish stocks involved in this. Also, this involves review and critical evaluation of the scientific advice sup...... to distinguish specific effects and impacts of each individual measures implemented. Accordingly, it is also very difficult to make scientific management evaluation and advice associated to the individual measures......The present report is an EU-FP7-SOCIOEC Report giving an overview and critical evaluation of the current management measures implemented for the North Sea mixed demersal fisheries and the fish stocks involved in this. Also, this involves review and critical evaluation of the scientific advice....... The prevailing management system and principle has been landing quotas (TAC, Total Allowable Catch) mainly based on the EU principle of relative stability in the international sharing of the TAC. Also, general effort limitations and technical measures are set for the EU and Norwegian fisheries on top of the TAC...

  12. Neutrino and antineutrino inclusive charged-current cross section measurement with the MINOS near detector

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharya, Debdatta [Univ. of Pittsburgh, PA (United States)

    2009-01-01

    This thesis presents the measurement of energy dependence of the neutrino-nucleon inclusive charged current cross section on an isoscalar target in the range 3-50 GeV for neutrinos and 5-50 GeV energy range for antineutrinos. The data set was collected with the MINOS Near Detector using the wide band NuMI beam at Fermilab. The size of the charged current sample is 1.94 x 106 neutrino events and 1.60 x 105 antineutrino events. The flux has been extracted using a low hadronic energy sub-sample of the charged current events. The energy dependence of the cross section is obtained by dividing the charged current sample with the extracted flux. The neutrino and antineutrino cross section exhibits a linear dependence on energy at high energy but shows deviations from linear behavior at low energy. We also present a measurement of the ratio of antineutrino to neutrino inclusive cross section.

  13. Eddy current nondestructive testing device for measuring variable characteristics of a sample utilizing Walsh functions

    Science.gov (United States)

    Libby, Hugo L.; Hildebrand, Bernard P.

    1978-01-01

    An eddy current testing device for measuring variable characteristics of a sample generates a signal which varies with variations in such characteristics. A signal expander samples at least a portion of this generated signal and expands the sampled signal on a selected basis of square waves or Walsh functions to produce a plurality of signal components representative of the sampled signal. A network combines these components to provide a display of at least one of the characteristics of the sample.

  14. Current Status of Integral Medical Study on Endometriosis

    Institute of Scientific and Technical Information of China (English)

    YU Chao-qin (俞超芹); YU Jin (俞瑾)

    2003-01-01

    @@ Endometriosis (EM), an estrogen dependent disease that comes from the planting of endometrial gland and stroma outside the uterine cavity, is characterized by invasiveness, wide planting and liability to relapse. It has been proved by recent studies that the pathogenesis of EM has its genetic background and is closely related with neuro-, endocrino- and immuno-factors. There has been great progress in the treatment of EM, but the clinical effect is not yet satisfactory. Traditional Chinese medicine (TCM) has definitely played its role in EM treatment. In this article, the current status of integral medical study on EM is reviewed.

  15. Validation of streamflow measurements made with M9 and RiverRay acoustic Doppler current profilers

    Science.gov (United States)

    Boldt, Justin A.; Oberg, Kevin A.

    2015-01-01

    The U.S. Geological Survey (USGS) Office of Surface Water (OSW) previously validated the use of Teledyne RD Instruments (TRDI) Rio Grande (in 2007), StreamPro (in 2006), and Broadband (in 1996) acoustic Doppler current profilers (ADCPs) for streamflow (discharge) measurements made by the USGS. Two new ADCPs, the SonTek M9 and the TRDI RiverRay, were first used in the USGS Water Mission Area programs in 2009. Since 2009, the OSW and USGS Water Science Centers (WSCs) have been conducting field measurements as part of their stream-gaging program using these ADCPs. The purpose of this paper is to document the results of USGS OSW analyses for validation of M9 and RiverRay ADCP streamflow measurements. The OSW required each participating WSC to make comparison measurements over the range of operating conditions in which the instruments were used until sufficient measurements were available. The performance of these ADCPs was evaluated for validation and to identify any present and potential problems. Statistical analyses of streamflow measurements indicate that measurements made with the SonTek M9 ADCP using firmware 2.00–3.00 or the TRDI RiverRay ADCP using firmware 44.12–44.15 are unbiased, and therefore, can continue to be used to make streamflow measurements in the USGS stream-gaging program. However, for the M9 ADCP, there are some important issues to be considered in making future measurements. Possible future work may include additional validation of streamflow measurements made with these instruments from other locations in the United States and measurement validation using updated firmware and software.

  16. Quality assurance and control issues for HF radar wave and current measurements

    Science.gov (United States)

    Wyatt, Lucy

    2015-04-01

    HF radars are now widely used to provide surface current measurements over wide areas of the coastal ocean for scientific and operational applications. In general data quality is acceptable for these applications but there remain issues that impact on the quantity and quality of the data. These include problems with calibration and interference which impact on both phased array (e.g. WERA, Pisces) and direction-finding (e.g. SeaSonde) radars. These same issues and others (e.g. signal-to-noise, in-cell current variability, antenna sidelobes) also impact on the quality and quantity of wave data that can be obtained. These issues will be discussed in this paper, illustrated with examples from deployments of WERA, Pisces and SeaSonde radars in the UK, Europe, USA and Australia. These issues involve both quality assurance (making sure the radars perform to spec and the software is fully operational) and in quality control (identifying problems with the data due to radar hardware or software performance issues and flagging these in the provided data streams). Recommendations for the former, and current practice (of the author and within the Australian Coastal Ocean Radar Network, ACORN*) for the latter, will be discussed. The quality control processes for wave measurement are not yet as well developed as those for currents and data from some deployments can be rather noisy. Some new methods, currently under development by SeaView Sensing Ltd and being tested with ACORN data, will be described and results presented. *ACORN is a facility of the Australian Integrated Marine Observing System, IMOS. IMOS is a national collaborative research infrastructure, supported by Australian Government. It is led by University of Tasmania in partnership with the Australian marine and climate science community.

  17. Direct Measurement of Nuclear Dependence of Charged Current Quasielasticlike Neutrino Interactions Using MINERvA

    Science.gov (United States)

    Betancourt, M.; Ghosh, A.; Walton, T.; Altinok, O.; Bellantoni, L.; Bercellie, A.; Bodek, A.; Bravar, A.; Cai, T.; Martinez Caicedo, D. A.; Carneiro, M. F.; Dytman, S. A.; Díaz, G. A.; Felix, J.; Fields, L.; Fine, R.; Galindo, R.; Gallagher, H.; Ghosh, A.; Golan, T.; Gran, R.; Harris, D. A.; Higuera, A.; Hurtado, K.; Kiveni, M.; Kleykamp, J.; Le, T.; Maher, E.; Manly, S.; Mann, W. A.; Marshall, C. M.; McFarland, K. S.; McGivern, C. L.; McGowan, A. M.; Messerly, B.; Miller, J.; Mislivec, A.; Morfín, J. G.; Mousseau, J.; Naples, D.; Nelson, J. K.; Norrick, A.; Nuruzzaman, Patrick, C. E.; Perdue, G. N.; Ramírez, M. A.; Ren, L.; Rimal, D.; Rodrigues, P. A.; Ruterbories, D.; Schellman, H.; Sobczyk, J. T.; Solano Salinas, C. J.; Sánchez Falero, S.; Valencia, E.; Wolcott, J.; Wospakrik, M.; Yaeggy, B.; Minerva Collaboration

    2017-08-01

    Charged-current νμ interactions on carbon, iron, and lead with a final state hadronic system of one or more protons with zero mesons are used to investigate the influence of the nuclear environment on quasielasticlike interactions. The transferred four-momentum squared to the target nucleus, Q2, is reconstructed based on the kinematics of the leading proton, and differential cross sections versus Q2 and the cross-section ratios of iron, lead, and carbon to scintillator are measured for the first time in a single experiment. The measurements show a dependence on the atomic number. While the quasielasticlike scattering on carbon is compatible with predictions, the trends exhibited by scattering on iron and lead favor a prediction with intranuclear rescattering of hadrons accounted for by a conventional particle cascade treatment. These measurements help discriminate between different models of both initial state nucleons and final state interactions used in the neutrino oscillation experiments.

  18. Direct Measurement of Nuclear Dependence of Charged Current Quasielasticlike Neutrino Interactions Using MINER$\

    Energy Technology Data Exchange (ETDEWEB)

    Betancourt, M.; et al.

    2017-08-25

    Charged-current νμ interactions on carbon, iron, and lead with a final state hadronic system of one or more protons with zero mesons are used to investigate the influence of the nuclear environment on quasielasticlike interactions. The transferred four-momentum squared to the target nucleus, Q2, is reconstructed based on the kinematics of the leading proton, and differential cross sections versus Q2 and the cross-section ratios of iron, lead, and carbon to scintillator are measured for the first time in a single experiment. The measurements show a dependence on the atomic number. While the quasielasticlike scattering on carbon is compatible with predictions, the trends exhibited by scattering on iron and lead favor a prediction with intranuclear rescattering of hadrons accounted for by a conventional particle cascade treatment. These measurements help discriminate between different models of both initial state nucleons and final state interactions used in the neutrino oscillation experiments.

  19. Paying research participants: a study of current practices in Australia.

    Science.gov (United States)

    Fry, C L; Ritter, A; Baldwin, S; Bowen, K J; Gardiner, P; Holt, T; Jenkinson, R; Johnston, J

    2005-09-01

    To examine current research payment practices and to inform development of clearer guidelines for researchers and ethics committees. Exploratory email based questionnaire study of current research participant reimbursement practices. A diverse sample of organisations and individuals were targeted. Australia. Contacts in 84 key research organisations and select electronic listservers across Australia. A total of 100 completed questionnaires were received with representations from a variety of research areas (for example, market, alcohol and drug, medical, pharmaceutical and social research). Open-ended and fixed alternative questions about type of research agency; type of research; type of population under study; whether payment is standard; amounts and mechanisms of payment; factors taken into account when deciding on payment practices; and whether payment policies exist. Reimbursement practice is highly variable. Where it occurs (most commonly for drug dependent rather than health professional or general population samples) it is largely monetary and is for time and out-of-pocket expenses. Ethics committees were reported to be often involved in decision making around reimbursement. Research subject payment practices vary in Australia. Researchers who do provide payments to research participants generally do so without written policy and procedures. Ethics committees have an important role in developing guidelines in this area. Specific guidelines are needed considering existing local policies and procedures; payment models and their application in diverse settings; case study examples of types and levels of reimbursement; applied definitions of incentive and inducement; and the rationale for diverse payment practices in different settings.

  20. What are we assessing when we measure food security? A compendium and review of current metrics.

    Science.gov (United States)

    Jones, Andrew D; Ngure, Francis M; Pelto, Gretel; Young, Sera L

    2013-09-01

    The appropriate measurement of food security is critical for targeting food and economic aid; supporting early famine warning and global monitoring systems; evaluating nutrition, health, and development programs; and informing government policy across many sectors. This important work is complicated by the multiple approaches and tools for assessing food security. In response, we have prepared a compendium and review of food security assessment tools in which we review issues of terminology, measurement, and validation. We begin by describing the evolving definition of food security and use this discussion to frame a review of the current landscape of measurement tools available for assessing food security. We critically assess the purpose/s of these tools, the domains of food security assessed by each, the conceptualizations of food security that underpin each metric, as well as the approaches that have been used to validate these metrics. Specifically, we describe measurement tools that 1) provide national-level estimates of food security, 2) inform global monitoring and early warning systems, 3) assess household food access and acquisition, and 4) measure food consumption and utilization. After describing a number of outstanding measurement challenges that might be addressed in future research, we conclude by offering suggestions to guide the selection of appropriate food security metrics.

  1. Current Mathematical Methods Used in QSAR/QSPR Studies

    Directory of Open Access Journals (Sweden)

    Peixun Liu

    2009-04-01

    Full Text Available This paper gives an overview of the mathematical methods currently used in quantitative structure-activity/property relationship (QASR/QSPR studies. Recently, the mathematical methods applied to the regression of QASR/QSPR models are developing very fast, and new methods, such as Gene Expression Programming (GEP, Project Pursuit Regression (PPR and Local Lazy Regression (LLR have appeared on the QASR/QSPR stage. At the same time, the earlier methods, including Multiple Linear Regression (MLR, Partial Least Squares (PLS, Neural Networks (NN, Support Vector Machine (SVM and so on, are being upgraded to improve their performance in QASR/QSPR studies. These new and upgraded methods and algorithms are described in detail, and their advantages and disadvantages are evaluated and discussed, to show their application potential in QASR/QSPR studies in the future.

  2. Current management of bronchiectasis: review and 3 case studies.

    Science.gov (United States)

    Silverman, Enid; Ebright, Linda; Kwiatkowski, Marianne; Cullina, Joanne

    2003-01-01

    Bronchiectasis is the abnormal, irreversible dilatation of diseased bronchi. Permanently dilated airways, usually in the medium-sized bronchi, are inflamed and often obstructed with thick, purulent secretions. Known causative factors include postinfection bronchial damage, postinhalation injury, hypersensitivity reactions, and congenital airway obstructive disorders. Typical symptoms include sputum overproduction, fever, pleurisy, dyspnea, and chronic cough. Diagnosis involves radiographic studies and pulmonary function testing. Treatment includes oral, aerosolized, or intravenous antibiotic therapy according to the severity of the exacerbation, and mucus clearance by means of bronchial hygiene assistive devices, chest physiotherapy, postural drainage, and high-frequency chest compression. We present a review of bronchiectasis and offer 3 case studies illustrating current management of different presentations, including use of aerosolized antibiotics for patients infected with Pseudomonas aeruginosa. Although an adjunctive program of pulmonary rehabilitation may be useful for patients with bronchiectasis, no confirming studies have been performed to date, and additional research in this area is warranted.

  3. In situ measurements of wind and current speed and relationship between output power and turbulence

    Science.gov (United States)

    Duran Medina, Olmo; Schmitt, François G.; Sentchev, Alexei; Calif, Rudy

    2015-04-01

    In a context of energy transition, wind and tidal energy are sources of clean energy with the potential of partially satisfying the growing demand. The main problem of this type of energy, and other types of renewable energy remains the discontinuity of the electric power produced in different scales, inducing large fluctuations also called intermittency. This intermittency of wind and tidal energy is inherent to the turbulent nature of wind and marine currents. We consider this intermittent power production in strong relation with the turbulent intermittency of the resource. The turbulence theory is multifractal energy cascades models, a classic in physics of turbulence. From earlier studies in atmospheric sciences, we learn that wind speed and the aggregate power output are intermittent and multifractal over a wide range of scales [Calif and Schmitt 2014]. We want to extend this study to a marine current turbine and compare the scaling properties for those renewable energy sources. We consider here coupling between simultaneous velocity time series and output power from a wind turbine and a marine current turbine. Wind turbine data were obtained from Denmark and marine current data from Western Scheldt, Belgium where a prototype of a vertical and horizontal marine current turbines are tested. After an estimation of their Fourier density power spectra, we study their scaling properties in Kolmogorov's theory and the framework of fully developed turbulence. Hence, we employ a Hilbert-based methodology, namely arbitrary-order Hilbert spectral analysis [Calif et al. 2013a, 2013b] to characterize the intermittent property of the wind and marine current velocity in order to characterize the intermittent nature of the fluid. This method is used in order to obtain the spectrum and the corresponding power law for non-linear and non-stationary time series. The goal is to study the non-linear transfer characteristics in a multi-scale and multi-intensity framework.

  4. ADCP measured flow current of the middle-lower Changjiang River channel

    Institute of Scientific and Technical Information of China (English)

    Qiang ZHANG; Yafeng SHI; Zhongyuan CHEN; Tong JIANG

    2008-01-01

    The water column flow velocity of 36 river sections in the river reach between Hankou (Wuhan) and Wuxue of the middle-lower Changjiang River.Their cross sectional distribution patterns in relation to the river channel morphologies were examined by using shipmounted ADCP (Acoustic Doppler Current Profiler) instrument.The results indicate four (Ⅰ-Ⅳ) types of river channel morphology associated flow patterns:Ⅰ-laterally deepening riverbed topographic pattern; Ⅱ-symmetrical to asymmetrical riverbed topographic pattern; Ⅲ-relative fiat riverbed topographic pattern,and Ⅳ-sandbar supported riverbed topographic pattern.All these correspond to the different patterns of flow velocity distribution.The maximum flow velocity is usually related to the deeper water depth,but irregular water column distribution of flow current velocity results often from the vortices' current associated with river knots.Deeper river water depth is usually identified in the river reach located slightly downstream to the river knot,where faster flow velocity occurs.Downward change in flow velocity fits semi-log law,showing an exponential decreasing flow current with the maximum flow velocity near the water surface.However,in the river reach near the river knots,the water column distribution of flow current velocity does not fit the semi-log law,showing the irregular flow current pattern.This study,in context of river catchment management,highlights the controls of riverbed morphology to the flow current structure,which will shed light on the post study of Three Gorges damming in 2009.

  5. A Study of Strange Particles Produced in Neutrino Neutral Current Interactions in the NOMAD Experiment

    CERN Document Server

    Naumov, D V; Naumova, E; Popov, B; Astier, Pierre; Autiero, D; Baldisseri, Alberto; Baldo-Ceolin, Massimilla; Banner, M; Bassompierre, G; Benslama, K; Besson, N; Bird, I; Blumenfeld, B; Bobisut, F; Bouchez, J; Boyd, S; Bueno, A G; Bunyatov, S; Camilleri, L L; Cardini, A; Cattaneo, P W; Cavasinni, V; Cervera-Villanueva, A; Challis, R C; Collazuol, G; Conforto, G; Conta, C; Contalbrigo, M; Cousins, R; Daniels, D; Das, R; Degaudenzi, H M; Del Prete, T; De Santo, A; Dignan, T; Di Lella, L; do Couto e Silva, E; Dumarchez, J; Ellis, M; Feldman, G J; Ferrari, R; Ferrère, D; Flaminio, V; Fraternali, M; Gaillard, J M; Gangler, E; Geiser, A; Geppert, D; Gibin, D; Gninenko, S; Godley, A; Gómez-Cadenas, J J; Gosset, J; Gössling, C; Gouanère, M; Grant, A; Graziani, G; Guglielmi, A M; Hagner, C; Hernando, J; Hong, T M; Hubbard, D B; Hurst, P; Hyett, N; Iacopini, E; Joseph, C L; Juget, F R; Kent, N; Kirsanov, M; Klimov, O; Kokkonen, J; Kovzelev, A; Krasnoperov, A V; Lacaprara, S; Lachaud, C; Lakic, B; Lanza, A; La Rotonda, L; Laveder, M; Letessier-Selvon, A A; Lévy, J M; Linssen, Lucie; Ljubicic, A; Long, J; Lupi, A; Lyubushkin, V V; Marchionni, A; Martelli, F; Méchain, X; Mendiburu, J P; Meyer, J P; Mezzetto, Mauro; Mishra, S R; Moorhead, G F; Nédélec, P; Nefedov, Yu A; Nguyen-Mau, C; Orestano, D; Pastore, F; Peak, L S; Pennacchio, E; Pessard, H; Petti, R; Placci, A; Polesello, G; Pollmann, D; Polyarush, A Yu; Poulsen, C; Rebuffi, L; Rico, J; Roda, C; Rubbia, André; Salvatore, F; Schahmaneche, K; Schmidt, B; Schmidt, T; Sconza, A; Sevior, M E; Shih, D; Sillou, D; Soler, F J P; Sozzi, G; Steele, D; Stiegler, U; Stipcevic, M; Stolarczyk, T; Tareb-Reyes, M; Taylor, G N; Tereshchenko, V V; Toropin, A N; Touchard, A M; Tovey, Stuart N; Tran, M T; Tsesmelis, E; Ulrichs, J; Vacavant, L; Valdata-Nappi, M; Valuev, V Yu; Vannucci, François; Varvell, K E; Veltri, M; Vercesi, V; Vidal-Sitjes, G; Vieira, J M; Vinogradova, T G; Weber, F V; Weisse, T; Wilson, F F; Winton, L J; Yabsley, B D; Zaccone, Henri; Zuber, K; Zuccon, P

    2004-01-01

    Results of a detailed study of strange particle production in neutrino neutral current interactions are presented using the data from the NOMAD experiment. Integral yields of neutral strange particles (K0s, Lambda, Lambda-bar) have been measured. Decays of resonances and heavy hyperons with an identified K0s or Lambda in the final state have been analyzed. Clear signals corresponding to K* and Sigma(1385) have been observed. First results on the measurements of the Lambda polarization in neutral current interactions have been obtained.

  6. A study of strange particles produced in neutrino neutral current interactions in the NOMAD experiment

    Science.gov (United States)

    Naumov, D.; Chukanov, A.; Naumova, E.; Popov, B.; Astier, P.; Autiero, D.; Baldisseri, A.; Baldo-Ceolin, M.; Banner, M.; Bassompierre, G.; Benslama, K.; Besson, N.; Bird, I.; Blumenfeld, B.; Bobisut, F.; Bouchez, J.; Boyd, S.; Bueno, A.; Bunyatov, S.; Camilleri, L.; Cardini, A.; Cattaneo, P. W.; Cavasinni, V.; Cervera-Villanueva, A.; Challis, R.; Collazuol, G.; Conforto, G.; Conta, C.; Contalbrigo, M.; Cousins, R.; Daniels, D.; Das, R.; Degaudenzi, H.; Del Prete, T.; de Santo, A.; Dignan, T.; di Lella, L.; Do Couto E Silva, E.; Dumarchez, J.; Ellis, M.; Feldman, G. J.; Ferrari, R.; Ferrère, D.; Flaminio, V.; Fraternali, M.; Gaillard, J.-M.; Gangler, E.; Geiser, A.; Geppert, D.; Gibin, D.; Gninenko, S.; Godley, A.; Gomez-Cadenas, J.-J.; Gosset, J.; Gößling, C.; Gouanère, M.; Grant, A.; Graziani, G.; Guglielmi, A.; Hagner, C.; Hernando, J.; Hong, T. M.; Hubbard, D.; Hurst, P.; Hyett, N.; Iacopini, E.; Joseph, C.; Juget, F.; Kent, N.; Kirsanov, M.; Klimov, O.; Kokkonen, J.; Kovzelev, A.; Krasnoperov, A.; Lacaprara, S.; Lachaud, C.; Lakić, B.; Lanza, A.; La Rotonda, L.; Laveder, M.; Letessier-Selvon, A.; Levy, J.-M.; Linssen, L.; Ljubičić, A.; Long, J.; Lupi, A.; Lyubushkin, V.; Marchionni, A.; Martelli, F.; Méchain, X.; Mendiburu, J.-P.; Meyer, J.-P.; Mezzetto, M.; Mishra, S. R.; Moorhead, G. F.; Nédélec, P.; Nefedov, Yu.; Nguyen-Mau, C.; Orestano, D.; Pastore, F.; Peak, L. S.; Pennacchio, E.; Pessard, H.; Petti, R.; Placci, A.; Polesello, G.; Pollmann, D.; Polyarush, A.; Poulsen, C.; Rebuffi, L.; Rico, J.; Riemann, P.; Roda, C.; Rubbia, A.; Salvatore, F.; Schahmaneche, K.; Schmidt, B.; Schmidt, T.; Sconza, A.; Sevior, M.; Shih, D.; Sillou, D.; Soler, F. J. P.; Sozzi, G.; Steele, D.; Stiegler, U.; Stipčević, M.; Stolarczyk, Th.; Tareb-Reyes, M.; Taylor, G. N.; Tereshchenko, V.; Toropin, A.; Touchard, A.-M.; Tovey, S. N.; Tran, M.-T.; Tsesmelis, E.; Ulrichs, J.; Vacavant, L.; Valdata-Nappi, M.; Valuev, V.; Vannucci, F.; Varvell, K. E.; Veltri, M.; Vercesi, V.; Vidal-Sitjes, G.; Vieira, J.-M.; Vinogradova, T.; Weber, F. V.; Weisse, T.; Wilson, F. F.; Winton, L. J.; Yabsley, B. D.; Zaccone, H.; Zuber, K.; Zuccon, P.; NOMAD Collaboration

    2004-11-01

    Results of a detailed study of strange particle production in neutrino neutral current interactions are presented using the data from the NOMAD experiment. Integral yields of neutral strange particles ( Ks0, Λ, Λ¯) have been measured. Decays of resonances and heavy hyperons with an identified Ks0 or Λ in the final state have been analyzed. Clear signals corresponding to K and Σ(1385 have been observed. First results on the measurements of the Λ polarization in neutral current interactions have been obtained.

  7. Measurement of the $Z/A$ dependence of neutrino charged-current total cross-sections

    CERN Document Server

    Kayis-Topaksu, A; Van Dantzig, R; De Jong, M; Konijn, J; Melzer, O; Oldeman, R G C; Pesen, E; Van der Poel, C A F J; Spada, F R; Visschers, J L; Güler, M; Serin-Zeyrek, M; Kama, S; Sever, R; Tolun, P; Zeyrek, M T; Armenise, N; Catanesi, M G; De Serio, M; Ieva, M; Muciaccia, M T; Radicioni, E; Simone, S; Bülte, A; Winter, Klaus; El-Aidi, R; Van de Vyver, B; Vilian, P; Wilquet, G; Saitta, B; Di Capua, E; Ogawa, S; Shibuya, H; Artamonov, A V; Brunner, J; Chizhov, M; Cussans, D G; Doucet, M; Fabre, Jean-Paul; Hristova, I R; Kawamura, T; Kolev, D; Litmaath, M; Meinhard, H; Panman, J; Papadopoulos, I M; Ricciardi, S; Rozanov, A; Saltzberg, D; Tsenov, R V; Uiterwijk, J W E; Zucchelli, P; Goldberg, J; Chikawa, M; Arik, E; Song, J S; Yoon, C S; Kodama, K; Ushida, N; Aoki, S; Hara, T; Delbar, T; Favart, D; Grégoire, G; Kalinin, S; Makhlyoueva, I V; Gorbunov, P; Khovanskii, V D; Shamanov, V V; Tsukerman, I; Bruski, N; Frekers, D; Rondeshagen, D; Wolff, T; Hoshino, K; Kawada, J; Komatsu, M; Miyanishi, M; Nakamura, M; Nakano, T; Narita, K; Niu, K; Niwa, K; Nonaka, N; Sato, O; Toshito, T; Buontempo, S; Cocco, A G; D'Ambrosio, N; De Lellis, G; De Rosa, G; Di Capua, F; Ereditato, A; Fiorillo, G; Marotta, A; Messina, M; Migliozzi, P; Pistillo, C; Santorelli, R; Scotto-Lavina, L; Strolin, P; Tioukov, V; Nakamura, K; Okusawa, T; Dore, U; Loverre, P F; Ludovici, L; Maslennikov, A L; Righini, P; Rosa, G; Santacesaria, R; Satta, A; Barbuto, E; Bozza, C; Grella, G; Romano, G; Sirignano, C; Sorrentino, S; Sato, Y; Tezuka, I

    2003-01-01

    A relative measurement of total cross-sections is reported for polyethylene, marble, iron, and lead targets for the inclusive charged-current reaction nu_mu + N -> mu^- + X. The targets, passive blocks of ~100kg each, were exposed simultaneously to the CERN SPS wide-band muon-neutrino beam over a period of 18 weeks. Systematics effects due to differences in the neutrino flux and detector efficiency for the different target locations were minimised by changing the position of the four targets on their support about every two weeks. The relative neutrino fluxes on the targets were monitored within the same experiment using charged-current interactions in the calorimeter positioned directly downstream of the four targets. From a fit to the Z/A dependence of the total cross-sections a value is deduced for the effective neutron-to-proton cross-section ratio.

  8. Immobilization and surface functionalization of gold nanoparticles monitored via streaming current/potential measurements.

    Science.gov (United States)

    Greben, Kyrylo; Li, Pinggui; Mayer, Dirk; Offenhäusser, Andreas; Wördenweber, Roger

    2015-05-14

    A streaming current/potential method is optimized and used for the analysis of the variation of the surface potential upon chemical modifications of a complex interface consisting of different organic molecules and gold nanoparticles (AuNPs). The surfaces of Si/SiO2 substrates modified with 3-aminopropyltriethoxysilane (APTES), AuNPs, and 11-amino-1-undecanethiol (aminothiols) are analyzed via pH and time dependent ζ potential measurements that reveal the stability and modification of the surface and identify crucial parameters for each individual preparation step. For instance, surface activation and especially molecular adsorbate layers tend not to be stable in time, whereas the substrate and the AuNPs provide a stable surface potential as long as impurities are avoided. It is shown that the streaming potential/current technique represents an ideal tool to analyze and monitor the complex surfaces and their modification.

  9. Current research activity in the measurement of thorium and the identification of future research needs.

    Science.gov (United States)

    White, M A; Howe, A M; Rosen, P; Holmes, L

    2001-01-01

    A pre-requisite in the setting and enforcement of regulatory limits for exposure to thorium in the workplace is that thorium and its progeny can be accurately measured. Literature surveys have shown that the majority of thorium measurements were performed using either a radiochemical technique, such as alpha or gamma spectroscopy, or ICP-MS. For many methods. there was a separation step to isolate and pre-concentrate thorium from the sample matrix. Thorium was most commonly measured in geological matrices and industrial materials. A survey of current research activity was performed through distribution of a questionnaire to laboratories and national centres. From the rcsponses, four areas of current activity were identified: (i) development of methods for low level thorium determination, (ii) biological monitoring and metabolism of thorium, (iii) environmental monitoring for thorium, and (iv) health risks from X ray contract media. Two key areas for priority research were identified by the thorium Thematic Network: namely sample preparation methods and for traceable standards and reference materials for thorium analysis.

  10. A Measurement of the charged-current interaction cross section of the tau neutrino

    Energy Technology Data Exchange (ETDEWEB)

    Maher, Emily O' Connor; /Minnesota U.

    2005-01-01

    The Fermilab experiment E872 (DONUT) was designed to make the first observation of the tau neutrino charged-current interaction. Using a hybrid emulsion-spectrometer detector, the tau lepton was identified by its single-prong or trident decay. Six interactions were observed, of which five were in the deep inelastic scattering region. These five interaction were used to measure the charged-current cross section of the tau neutrino. To minimize uncertainties, the tau neutrino cross section was measured relative to the electron neutrino cross section. The result {sigma}{sub {nu}{sub {tau}}N}{sup const}/{sigma}{sub {nu}{sub e}N}{sup const} = 0.77 {+-} 0.39 is consistent with 1.0, which is predicted by lepton universality. The tau neutrino cross section was also measured for 115 GeV neutrinos, which was the average energy of the interacted tau neutrinos. The result {sigma}{sub {nu}{sub {tau}}N}{sup exp} = 45 {+-} 21 x 10{sup -38} cm{sup 2} is consistent with the standard model prediction calculated in this thesis, {sigma}{sub {tau}N}{sup SM} = 48 {+-} 5 x 10{sup -38} cm{sup 2}.

  11. A Measurement Of The Charged-current Interaction Cross Section Of The Tau Neutrino

    CERN Document Server

    Maher, E O

    2005-01-01

    The Fermilab experiment E872 (DONUT) was designed to make the first observation of the tau neutrino charged-current interaction. Using a hybrid emulsion-spectrometer detector, the tau lepton was identified by its single- prong or trident decay. Six interactions were observed, of which five were in the deep inelastic scattering region. These five interaction were used to measure the charged-current cross section of the tau neutrino. To minimize uncertainties, the tau neutrino cross section was measured relative to the electron neutrino cross section. The result sconstn tNsconst neN=0.77±0.39 is consistent with 1.0, which is predicted by lepton universality. The tau neutrino cross section was also measured for 115 GeV neutrinos, which was the average energy of the interacted tau neutrinos. The result sexpnt N=45±21×10-38 cm2 is consistent with the standard model prediction calculated in this thesis, sSMnt N=48±5×10-38 cm2.

  12. Critical current density measurement of thin films by AC susceptibility based on the penetration parameter h

    Energy Technology Data Exchange (ETDEWEB)

    Li Xiaofen, E-mail: xiaofenli@gmail.com [Materials Research Division, Riso National Laboratory for Sustainable Energy, Technical University of Denmark, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Grivel, Jean-Claude; Abrahamsen, Asger B.; Andersen, Niels H. [Materials Research Division, Riso National Laboratory for Sustainable Energy, Technical University of Denmark, Frederiksborgvej 399, DK-4000 Roskilde (Denmark)

    2012-07-15

    We have numerically proved that the dependence of AC susceptibility {chi} of a E(J) power law superconducting thin disc on many parameters can be reduced to one penetration parameter h, with E the electric field and J the current density. Based on this result, we propose a way of measuring the critical current density J{sub c} of superconducting thin films by AC susceptibility. Compared with the normally used method based on the peak of the imaginary part, our method uses a much larger range of the AC susceptibility curve, thus allowing determination of the temperature (T) dependence of J{sub c} from a normally applied {chi}(T) measurement. A fitting equation J{sub c} = 1.9H{sub a} Divides {chi} Prime Divides {sup 0.69}/d, -0.4 < {chi} Prime < -0.001 derived from the critical state case (Bean model) can be used in most situations, where H{sub a} is the amplitude of the applied AC field, {chi} Prime is the real part of the normalized susceptibility and d is the thickness of the film. The method is valid for the cases where the film is fully penetrated. We also discuss how the finite London penetration depth affects the susceptibility when the film is screened. Measurements with varying T, H{sub a} and DC background field H{sub dc} are performed to support the arguments.

  13. Critical current density measurement of thin films by AC susceptibility based on the penetration parameter h

    Science.gov (United States)

    Li, Xiao-Fen; Grivel, Jean-Claude; Abrahamsen, Asger B.; Andersen, Niels H.

    2012-07-01

    We have numerically proved that the dependence of AC susceptibility χ of a E(J) power law superconducting thin disc on many parameters can be reduced to one penetration parameter h, with E the electric field and J the current density. Based on this result, we propose a way of measuring the critical current density Jc of superconducting thin films by AC susceptibility. Compared with the normally used method based on the peak of the imaginary part, our method uses a much larger range of the AC susceptibility curve, thus allowing determination of the temperature (T) dependence of Jc from a normally applied χ(T) measurement. A fitting equation Jc = 1.9Ha∣χ‧∣0.69/d, -0.4 Bean model) can be used in most situations, where Ha is the amplitude of the applied AC field, χ‧ is the real part of the normalized susceptibility and d is the thickness of the film. The method is valid for the cases where the film is fully penetrated. We also discuss how the finite London penetration depth affects the susceptibility when the film is screened. Measurements with varying T, Ha and DC background field Hdc are performed to support the arguments.

  14. A Measurement of the Charged-Current Interaction Cross Section of the Tau Neutrino

    Energy Technology Data Exchange (ETDEWEB)

    Maher, Emily O' Connor [Univ. of Minnesota, Minneapolis, MN (United States)

    2007-02-01

    The Fermilab experiment E872 (DONUT) was designed to make the first observation of the tau neutrino charged-current interaction. Using a hybrid emulsion-spectrometer detector, the tau lepton was identified by its single-prong or trident decay. Six interactions were observed, of which five were in the deep inelastic scattering region. These five interaction were used to measure the charged-current cross section of the tau neutrino. To minimize uncertainties, the tau neutrino cross section was measured relative to the electron neutrino cross section. The result σντNconstνeNconst = 0.77 ± 0.39 is consistent with 1.0, which is predicted by lepton universality. The tau neutrino cross section was also measured for 115 GeV neutrinos, which was the average energy of the interacted tau neutrinos. The result σντNexp = 45 ± 21 x 10-38 cm2 is consistent with the standard model prediction calculated in this thesis, σντNSM = 48 ± 5 x 10-38 cm2.

  15. Single element of the matrix source of negative hydrogen ions: Measurements of the extracted currents combined with diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Yordanov, D., E-mail: yordanov@phys.uni-sofia.bg; Lishev, St.; Shivarova, A. [Faculty of Physics, Sofia University, BG-1164 Sofia (Bulgaria)

    2016-02-15

    Combining measurements of the extracted currents with probe and laser-photodetachment diagnostics, the study is an extension of recent tests of factors and gas-discharge conditions stimulating the extraction of volume produced negative ions. The experiment is in a single element of a rf source with the design of a matrix of small-radius inductively driven discharges. The results are for the electron and negative-ion densities, for the plasma potential and for the electronegativity in the vicinity of the plasma electrode as well as for the currents of the extracted negative ions and electrons. The plasma-electrode bias and the rf power have been varied. Necessity of a high bias to the plasma electrode and stable linear increase of the extracted currents with the rf power are the main conclusions.

  16. A study on current situations of college students' foreign language anxiety

    Institute of Scientific and Technical Information of China (English)

    Bi Ran

    2015-01-01

    An empirical study on current situations of college students' foreign language anxiety is concerned with in this paper. The author adopted Horwitz's Foreign Language Classroom Anxiety Scale (FLCAS) to measure the level of foreign language anxiety of 325 participants and then the conclusions are drawn.

  17. Study of transient current induced by heavy-ion microbeams in Si and GaAs

    Energy Technology Data Exchange (ETDEWEB)

    Hirao, Toshio; Nashiyama, Isamu; Kamiya, Tomihiro; Suda, Tamotu [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    1997-03-01

    Heavy-ion microbeams were applied to the study of mechanism of single event upset (SEU). Transient current induced in p{sup +}n junction diodes by strike of heavy ion microbeam were measured by using a high-speed digitizing sampling system. (author)

  18. Experimental study on directional solidification of Al-Si alloys under the influence of electric currents

    Science.gov (United States)

    Räbiger, D.; Zhang, Y.; Galindo, V.; Franke, S.; Willers, B.; Eckert, S.

    2016-07-01

    The application of electric currents during solidification can cause grain refinement in metallic alloys. However, the knowledge about the mechanisms underlying the decrease in grain size remains fragmentary. This study considers the solidification of Al-Si alloys under the influence of electric currents for the configuration of two parallel electrodes at the free surface. Solidification experiments were performed under the influence of both direct currents (DC) and rectangular electric current pulses (ECP). The interaction between the applied current and its own induced magnetic field causes a Lorentz force which produces an electro-vortex flow. Numerical simulations were conducted to calculate the Lorentz force, the Joule heating and the induced melt flow. The numerical predictions were confirmed by isothermal flow measurements in eutectic GaInSn. The results demonstrate that the grain refining effect observed in our experiments can be ascribed solely to the forced melt flow driven by the Lorentz force.

  19. Simulation studies of direct-current microdischarges for electric propulsion

    Science.gov (United States)

    Deconinck, Thomas Dominique

    The structure of direct-current microdischarges is investigated using a detailed two-dimensional multi-species continuum model. Microdischarges are direct-current discharges that operate at a relatively high pressure of about 100 Torr and geometric dimensions in the 10-100 micrometer range. Our motivation for the study of microdischarges comes from a potential application of these devices in microthrusters for small satellite propulsion. The Micro Plasma Thruster (MPT) concept consists of a direct-current microdischarge in a geometry comprising a constant area flow section followed by a diverging exit nozzle. A detailed description of the plasma dynamics inside the MPT including power deposition, ionization, coupling of the plasma phenomena with high-speed flow, and propulsion system performance is reported in this study. A two-dimensional model is developed as part of this study. The model consists of a plasma module coupled to a flow module and is solved on a hybrid unstructured mesh framework. The plasma module provides a self-consistent, multi-species, multi-temperature description of the microdischarge phenomena while the flow module provides a description of the low Reynolds number compressible flow through the system. The plasma module solves conservation equations for plasma species continuity and electron energy, and Poisson's equation for the self-consistent electric field. The flow module solves mass, bulk gas momentum and energy equations. The coupling of energy from the electrostatic field to the plasma species is modeled by the Joule heating term which appears in the electron and heavy species energy equations. Discretization of the Joule heating term on unstructured meshes requires special attention. We propose a new robust method for the numerical discretization of the Joule heating term on such meshes using a cell-centered, finite volume approach. A prototypical microhollow cathode discharge (MHCD) is studied to guide and validate the modeling

  20. Measurements of the neutral current e{sup {+-}}p cross sections using longitudinally polarised lepton beams at HERA II

    Energy Technology Data Exchange (ETDEWEB)

    Nikiforov, A.

    2007-01-18

    This thesis presents inclusive e{sup {+-}}p single and double differential cross sections for neutral current deep inelastic scattering measured as functions of the four-momentum transfer squared Q{sup 2} and the Bjorken variable x in interactions of longitudinally polarised leptons with unpolarised protons using the H1 detector at HERA II. An overview of the phenomenology of deep inelastic scattering is given and the experimental apparatus as well as the measurement and analysis procedures are described. The analysis is based on e{sup +}p data taken in 2003-04 and e{sup -}p data taken in 2005 at a centre-of-mass energy of {radical}(s)=318 GeV, with integrated luminosities of 47.6 pb{sup -1} and 98.4 pb{sup -1} for the e{sup +}p and e{sup -}p samples, respectively. The cross sections are measured in the range of 200measurements are used to study polarisation e ects in neutral current interactions and to determine the structure function xF{sub 3}. The new HERA II data are combined together with previously published data from HERA I to determine the structure function xF{sub 3} with improved precision. Furthermore, this measurement is combined with the corresponding ZEUS measurement to provide the most accurate measurement of the interference structure function xF{sup {gamma}}{sup Z}{sub 3}, which is sensitive to the valence quark distributions down to low values of x. The data on polarised cross section asymmetries A{sup {+-}} are also combined with the ZEUS data. This leads to the first observation of parity violation in neutral current e{sup {+-}}p scattering at distances down to 10{sup -18} m. The data are well described by the Standard Model predictions. (orig.)

  1. Ozone sonde cell current measurements and implications for observations of near-zero ozone concentrations in the tropical upper troposphere

    OpenAIRE

    H. Vömel; K. Diaz

    2009-01-01

    Laboratory measurements of the Electrochemical Concentration Cell (ECC) ozone sonde cell current using ozone free air as well as defined amounts of ozone reveal that background current measurements during sonde preparation are neither constant as a function of time, nor constant as a function of ozone concentration. Using a background current, measured at a defined timed after exposure to high ozone may often overestimate the real background, leading to artificially low ozone concentrations i...

  2. Cerebral blood flow and autoregulation: current measurement techniques and prospects for noninvasive optical methods.

    Science.gov (United States)

    Fantini, Sergio; Sassaroli, Angelo; Tgavalekos, Kristen T; Kornbluth, Joshua

    2016-07-01

    Cerebral blood flow (CBF) and cerebral autoregulation (CA) are critically important to maintain proper brain perfusion and supply the brain with the necessary oxygen and energy substrates. Adequate brain perfusion is required to support normal brain function, to achieve successful aging, and to navigate acute and chronic medical conditions. We review the general principles of CBF measurements and the current techniques to measure CBF based on direct intravascular measurements, nuclear medicine, X-ray imaging, magnetic resonance imaging, ultrasound techniques, thermal diffusion, and optical methods. We also review techniques for arterial blood pressure measurements as well as theoretical and experimental methods for the assessment of CA, including recent approaches based on optical techniques. The assessment of cerebral perfusion in the clinical practice is also presented. The comprehensive description of principles, methods, and clinical requirements of CBF and CA measurements highlights the potentially important role that noninvasive optical methods can play in the assessment of neurovascular health. In fact, optical techniques have the ability to provide a noninvasive, quantitative, and continuous monitor of CBF and autoregulation.

  3. Thickness measuring of electroconductive pipe walls using the dual-frequency eddy-current method

    Science.gov (United States)

    Yakimov, Evgeny; Galtseva, Olga; Ustyugov, Daniil

    2017-01-01

    The paper describes a dual-frequency method for reducing the impact of changes in the gap size between the eddy-current transducer and the pipe, as well as the pipe electrical conductivity on the eddy-current thickness gauge readings. A block-diagram of the dual-frequency eddy-current thickness gauge is proposed for light-alloy drill pipes. The amplitude and signal phase dependencies on the wall thickness in the range from 6 to 17 mm and the gap in the range from 0 to 13.5 mm were studied, the results are presented. The digital signal processing algorithms based on the piecewise-linear approximation of low-frequency and high-frequency signal phase dependencies on the wall thickness are proposed. It is shown that the proposed correction algorithms can reduce the error caused by variations of electrical conductivity and the gap between the transducer and the pipe.

  4. A Systematic Review of Athletes’ and Coaches’ Nutrition Knowledge and Reflections on the Quality of Current Nutrition Knowledge Measures

    Science.gov (United States)

    Trakman, Gina L.; Forsyth, Adrienne; Devlin, Brooke L.; Belski, Regina

    2016-01-01

    Context: Nutrition knowledge can influence dietary choices and impact on athletic performance. Valid and reliable measures are needed to assess the nutrition knowledge of athletes and coaches. Objectives: (1) To systematically review the published literature on nutrition knowledge of adult athletes and coaches and (2) to assess the quality of measures used to assess nutrition knowledge. Data Sources: MEDLINE, CINAHL, SPORTDiscuss, Web of Science, and SCOPUS. Study Selection: 36 studies that provided a quantitative measure of nutrition knowledge and described the measurement tool that was used were included. Data extraction: Participant description, questionnaire description, results (mean correct and responses to individual items), study quality, and questionnaire quality. Data synthesis: All studies were of neutral quality. Tools used to measure knowledge did not consider health literacy, were outdated with regards to consensus recommendations, and lacked appropriate and adequate validation. The current status of nutrition knowledge in athletes and coaches is difficult to ascertain. Gaps in knowledge also remain unclear, but it is likely that energy density, the need for supplementation, and the role of protein are frequently misunderstood. Conclusions: Previous reports of nutrition knowledge need to be interpreted with caution. A new, universal, up-to-date, validated measure of general and sports nutrition knowledge is required to allow for assessment of nutrition knowledge. PMID:27649242

  5. A Systematic Review of Athletes’ and Coaches’ Nutrition Knowledge and Reflections on the Quality of Current Nutrition Knowledge Measures

    Directory of Open Access Journals (Sweden)

    Gina L. Trakman

    2016-09-01

    Full Text Available Context: Nutrition knowledge can influence dietary choices and impact on athletic performance. Valid and reliable measures are needed to assess the nutrition knowledge of athletes and coaches. Objectives: (1 To systematically review the published literature on nutrition knowledge of adult athletes and coaches and (2 to assess the quality of measures used to assess nutrition knowledge. Data Sources: MEDLINE, CINAHL, SPORTDiscuss, Web of Science, and SCOPUS. Study Selection: 36 studies that provided a quantitative measure of nutrition knowledge and described the measurement tool that was used were included. Data extraction: Participant description, questionnaire description, results (mean correct and responses to individual items, study quality, and questionnaire quality. Data synthesis: All studies were of neutral quality. Tools used to measure knowledge did not consider health literacy, were outdated with regards to consensus recommendations, and lacked appropriate and adequate validation. The current status of nutrition knowledge in athletes and coaches is difficult to ascertain. Gaps in knowledge also remain unclear, but it is likely that energy density, the need for supplementation, and the role of protein are frequently misunderstood. Conclusions: Previous reports of nutrition knowledge need to be interpreted with caution. A new, universal, up-to-date, validated measure of general and sports nutrition knowledge is required to allow for assessment of nutrition knowledge.

  6. The Measuring and Protection Method for the Abnormal Rise of Magnetizing Inrush Current in a Divided Type 3 CTs System

    Science.gov (United States)

    Iwasaki, Fumio; Ibe, Masayuki; Ninohei, Koichiro; Okamura, Seichiro

    This paper describes the measuring and protection method for the abnormal rise of magnetizing inrush current in a divided type 3 CTs system. By divided type 3 CTs system, it is possible to measure the primary phase current and zero phase current at the same time. In this reason, the divided type 3 CTs system is widely used for the measurement of high voltage distribution line by simply clamping the each phase lines with 3CTs. For the accurate measurement of the phase current and zero phase current, the internal residual current in CT should be small as possible. It is reported that the abnormal rise of the residual current is generated in the practical field use and several ten ampere (converted to the primary current value) is observed in some case. The abnormal rise of the residual current is caused by the primary magnetizing inrush current or by the sum of the influence by electromagnetic field of the nearby conductors. The magnetizing inrush current is caused by the magnetic saturation of the core of CT. It is difficult to eliminate the abnormal residual current by using the bigger size of core. In our test, we used the active elements and independent feed back coils around the right and left core of CT. By using the feed back current from these coils it was observed that the magnetic saturation of the core is improved and the magnetizing inrush current can be controlled.

  7. Research on Proximity Magnetic Field Influence in Measuring Error of Active Electronic Current Transformers

    Directory of Open Access Journals (Sweden)

    Wu Weijiang

    2016-01-01

    Full Text Available The principles of the active electronic current transformer (ECT are introduced, and the mechanism of how a proximity magnetic field can influence the measuring of errors is analyzed from the perspective of the sensor section of the ECT. The impacts on active ECTs created by three-phase proximity magnetic field with invariable distance and variable distance are simulated and analyzed. The theory and simulated analysis indicate that the active ECTs are sensitive to proximity magnetic field under certain conditions. According to simulated analysis, a product structural design and the location of transformers at substation sites are suggested for manufacturers and administration of power supply, respectively.

  8. Parameter Estimation of Inverter and Motor Model at Standstill using Measured Currents Only

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Knudsen, Morten; Tønnes, M.

    1996-01-01

    to the system is the reference values for the stator voltages given as duty cycles for the Pulse With Modulated power device. The system output is the measured stator currents. Three experiments are describedgiving respectively 1) the stator resistance and inverter parameters, 2) the stator transient inductance...... and 3) the referred rotor rotor resistance and magnetizing inductance. The method developed in the two last experiments is independent of the inverter nonlinearity. New methods for system identification concerning saturation of the magnetic flux are given and a reference value for the flux level...

  9. Neutral and charged current cross section measurements and searches for new physics at HERA

    CERN Document Server

    Malden, N; Abramowicz, H; Adamczyk, L; Adamus, M; Adler, V; Aghuzumtsyan, G; Antonioli, P; Antonov, A; Arneodo, M; Bailey, D S; Bamberger, A; Barakbaev, A N; Barbagli, G; Barbi, M; Bari, G; Barreiro, F; Bartsch, D; Basile, M; Bauerdick, L A T; Behrens, U; Bell, M; Bellagamba, L; Benen, A; Bertolin, A; Bhadra, S; Bloch, I; Bodmann, B; Bold, T; Boos, E G; Borras, K; Boscherini, D; Brock, I; Brook, N H; Brugnera, R; Brümmer, N; Bruni, A; Bruni, G; Bussey, P J; Butterworth, J M; Bylsma, B; Caldwell, A; Capua, M; Cara Romeo, G; Carli, T; Carlin, R; Catterall, C D; Chekanov, S; Chiochia, V; Chwastowski, J; Ciborowski, J; Ciesielski, R; Cifarelli, Luisa; Cindolo, F; Cloth, P; Cole, J E; Collins-Tooth, C; Contin, A; Cooper-Sarkar, A M; Coppola, N; Cormack, C; Corradi, M; Corriveau, F; Cottrell, A; D'Agostini, Giulio; Dal Corso, F; Danilov, P; Dannheim, D; De Pasquale, S; Dementiev, R K; Derrick, M; Deshpande, Abhay A; Devenish, R C E; Dhawan, S; Dolgoshein, B A; Doyle, A T; Drews, G; Durkin, L S; Dusini, S; Eisenberg, Y; Ermolov, P F; Eskreys, Andrzej; Ferrando, J; Ferrero, M I; Figiel, J; Filges, D; Foster, B; Foudas, C; Fourletov, S; Fourletova, J; Fricke, U; Fusayasu, T; Gabareen, A; Gallo, E; Garfagnini, A; Geiser, A; Genta, C; Gialas, I; Giusti, P; Gladilin, L K; Gladkov, D; Glasman, C; Gliga, S; Goers, S; Golubkov, Yu A; Goncalo, R; González, O; Göttlicher, P; Grabowska-Bold, I; Grijpink, S; Grzelak, G; Gutsche, O; Gwenlan, C; Haas, T; Hain, W; Hall-Wilton, R; Hamatsu, R; Hamilton, J; Hanlon, S; Hart, J C; Hartmann, H; Hartner, G; Hartner, G F; Heaphy, E A; Heath, G P; Heath, H F; Helbich, M; Heusch, C A; Hilger, E; Hillert, S; Hirose, T; Hochman, D; Holm, U; Iacobucci, G; Iga, Y; Inuzuka, M; Irrgang, P; Jakob, H P; Jones, T W; Kagawa, S; Kahle, B; Kaji, H; Kananov, S; Kappes, A; Kataoka, Y; Yamazaki, M; Katkov, I I; Katz, U F; Kcira, D; Khein, L A; Kim, J Y; Kim, Y K; Kind, O; Kisielewska, D; Kitamura, S; Klimek, K; Koffeman, E; Kohno, T; Kooijman, P; Koop, T; Korzhav, I A; Kotanski, A; Kötz, U; Kowal, A M; Kowal, M; Kowalski, H; Kowalski, T; Krakauer, D; Kramberger, G; Kreisel, A; Krumnack, N; Kuze, M; Kuzmin, V A; Labarga, L; Labes, H; Lainesse, J; Lammers, S; Lee, J H; Lee, S W; Lelas, D; Levchenko, B B; Levman, G M; Levy, A; Li, L; Lightwood, M S; Lim, H; Lim, I T; Limentani, S; Ling, T Y; Liu, X; Löhr, B; Lohrmann, E; Loizides, J H; Long, K R; Longhin, A; Lukina, O Yu; Lupi, A; Luzniak, P; Maddox, E; Magill, S; Mankel, R; Margotti, A; Marini, G; Martin, J F; Mastroberardino, A; Matsuzawa, K; Mattingly, M C K; McCubbin, N A; Mellado, B; Melzer-Pellmann, I A; Menary, S R; Metlica, F; Meyer, U; Milite, M; Mirea, A; Monaco, V; Montanari, A; Moritz, M; Musgrave, B; Nagano, K; Nania, R; Nguyen, C N; Nigro, A; Ning, Y; Nishimura, T; Notz, D; Nowak, R J; Oh, B Y; Olkiewicz, K; Pac, M Y; Padhi, S; Paganis, S; Palmonari, F; Parenti, A; Park, I H; Patel, S; Paul, E; Pavel, N; Pawlak, J M; Pelfer, P G; Pellegrino, A; Pesci, A; Petrucci, M C; Piotrzkowski, K; Plucinsky, P P; Pokrovskiy, N S; Polini, A; Posocco, M; Proskuryakov, A S; Przybycien, M B; Rautenberg, J; Raval, A; Reeder, D D; Ren, Z; Renner, R; Repond, J; Riveline, U; Karshon, M; Robins, S; Rodrigues, E; Rosin, M; Rurua, L; Ruspa, M; Sacchi, R; Salehi, H; Sartorelli, G; Savin, A A; Saxon, D H; Schagen, S; Schioppa, M; Schlenstedt, S; Schmidke, W B; Schneekloth, U; Sciulli, F; Scott, J; Selonke, F; Shcheglova, L M; Skillicorn, I O; Slominski, W; Smith, W H; Soares, M; Solano, A; Son, D; Sosnovtsev, V V; Stairs, D G; Stanco, L; Standage, J; Stifutkin, A; Stoesslein, U; Stonjek, S; Stopa, P; Straub, P B; Suchkov, S; Susinno, G; Suszycki, L; Sutton, M R; Sztuk, J; Szuba, D; Szuba, J; Tandler, J; Tapper, A D; Tapper, R J; Tassi, E; Tawara, T; Terron, J; Tiecke, H G; Tokushuku, K; Tsurugai, T; Turcato, M; Tymieniecka, T; Ukleja, A; Ukleja, J; Vázquez, M; Velthuis, J J; Vlasov, N N; Voss, K C; Walczak, R; Walsh, R; Wang, M; Weber, A; Wessoleck, H; West, B J; Whitmore, J J; Wick, K; Wiggers, L; Wills, H H; Wing, M; Wolf, G; Yamada, S; Yamashita, T; Yoshida, R; Youngman, C; Zawiejski, L; Zeuner, W; Zhautykov, B O; Zichichi, A; Ziegler, A; Zotkin, S A; De Wolf, E; Del Peso, J; Malden, Nicholas

    2004-01-01

    HERA is the only high energy electron-proton collider in the world today and hence has unique opportunities both to probe the structure of the proton and to search for physics beyond the Standard Model. Results are presented for measurements of both neutral and charged current cross sections, and for searches for exotic processes involving direct electron-quark interactions (leptoquarks and R-parity violating SUSY), generic coupling models (contact interactions) and exclusive final states (isolated leptons and missing PT, single top production and pentaquarks). Exclusion limits on proposed models are set where no deviation from Standard Model predictions are found.

  10. Fingerprints of Majorana fermions in current-correlation measurements from a superconducting tunnel microscope

    Science.gov (United States)

    Devillard, P.; Chevallier, D.; Albert, M.

    2017-09-01

    We compute various current-correlation functions of electrons flowing from a topological nanowire to the tip of a superconducting scanning tunnel microscope and identify fingerprints of a Majorana bound state. In particular, the spin resolved cross correlations are shown to display a clear distinction between the presence of a such an exotic state (negative correlations) and an Andreev bound state (positive correlations). Similarity and differences with measurements with a normal tunnel microscope are also discussed, like the robustness to finite temperature, for instance.

  11. CURRENT STUDY ON THE FUNDING SOURCES COVERAGE OF CURRENT ASSETS TO COMPANIES LISTED ON THE BUCHAREST STOCK EXCHANGE

    Directory of Open Access Journals (Sweden)

    Teodor HADA

    2014-06-01

    Full Text Available This paper presents issues about the coverage with financing sources of current assets for 64 companies listed on the Bucharest Stock Exchange. The aim of the study is to see how to calculate indicators specific to current assets and the general framework offered as whole analysis of the financing sources of current assets. The introduction of the paper presents the objective, the research methodology and the novelties brought by this study. Further on, this study shows the various views of the authors about the concept of "current assets", financing sources of current assets, the calculation of net working capital, setting the limits of the normal working capital and determining the speed of rotation. After that was done, based on the theory, a case study was performed, for companies covered in this study. Conclusions focused on determining the final data about what was detailed in the previous paragraphs.

  12. Measurement of scrape-off-layer current dynamics during MHD activity and disruptions in HBT-EP

    Science.gov (United States)

    Levesque, J. P.; Brooks, J. W.; Abler, M. C.; Bialek, J.; Byrne, P. J.; Hansen, C. J.; Hughes, P. E.; Mauel, M. E.; Navratil, G. A.; Rhodes, D. J.

    2017-08-01

    We report scrape-off layer (SOL) current measurements during magnetohydrodynamic (MHD) mode activity, resonant magnetic perturbations (RMPs), and disruptions in the High Beta Tokamak—Extended Pulse (HBT-EP) device. Currents are measured via segmented plasma current Rogowski coils, jumpers running toroidally between otherwise-isolated vessel sections, and a grounded electrode in the scrape-off layer. These currents strongly depend on the plasma’s major radius, and amplitude and phase of non-axisymmetric field components. SOL currents connecting through the vessel are seen to reach  ∼0.2{--}0.5 % of the plasma current during typical kink activity and RMPs. Plasma current asymmetries and scrape-off-layer currents generated during disruptions, which are commonly called halo currents, reach  ∼4 % of I p. Asymmetric toroidal currents between vessel sections rotate at tens of kHz through most of the current quench, then symmetrize once I p reaches  ∼30 % of its pre-disruptive value. Toroidal jumper currents oscillate between co- and counter-I p, with co-I p being dominant on average during disruptions. A relative increase in local plasma current measured by a segmented I p Rogowski coil correlates with counter-I p current in the nearest toroidal jumper. Measurements are interpreted in the context of two models that produce contrary predictions for the toroidal vessel current polarity during disruptions. Plasma current asymmetry measurements are consistent with both models, and SOL currents scale with plasma displacement toward the vessel wall. The design of an upcoming SOL current diagnostic and control upgrade is also briefly presented.

  13. New turbidity current model based on high-resolution monitoring of the longest flow ever measured

    Science.gov (United States)

    Azpiroz, Maria; Cartigny, Matthieu; Talling, Peter; Parsons, Daniel; Simmons, Steve; Clare, Michael; Sumner, Esther; Pope, Ed

    2016-04-01

    Turbidity currents transport large amounts of sediment from shallow waters towards deep ocean basins. Little is known about these flows, despite their potential hazard for damaging expensive and strategically important seafloor infrastructure. So far turbidity currents have been profiled in only 6 deep ocean locations worldwide. Our current knowledge of these flows is therefore mainly based on scaled-down experimental and computationally-limited numerical modelling. Here we present results from the monitoring of a one-week long turbidity current in the Congo Canyon that had a discharge close to that of the Mississippi River. Measurements taken every 5 seconds give the most detailed image yet of a turbidity current deep-water over an unprecedented duration. Our analysis reveals a different flow structure than that presented in previous models. Classical models display a thick front of the flow followed by a thinner and faster flow, which gives way to a short and quasi-steady body. Instead, we observe a thin frontal cell that outruns a thicker (~80 m), long and slower quasi-steady flow. In contrast to the previous model, where the thinner faster flow feeds sediment into the head, the Congo Canyon turbidity current shows a frontal cell that feeds sediment into, and at the same time outruns, the succeeding quasi-steady flow. As a result of the faster moving frontal cell, the flow should continuously stretch and grow in length while propagating down the system. Within the quasi-steady body, the flow switches between what appears to be two stable flow modes. One mode exhibits a fast and thin velocity profile whose maximum is a low distance from the seabed and resembles Froude-supercritical flow conditions, while the other mode is similar to Froude-subcritical flow conditions as the flow is thicker and slower. These first observations provide new insights into the behaviour of deep water long duration flows that differ from traditional models and provide an exciting

  14. Measurement of neutral current cross-sections at high Bjorken- with the ZEUS detector at HERA

    Indian Academy of Sciences (India)

    Inderpal Singh; on behalf of the ZEUS Collaboration

    2012-11-01

    A new method is employed to measure the neutral current cross-section up to Bjorken values of 1 with the ZEUS detector at HERA using an integrated luminosity of 187 pb-1 of electron–proton collisions and 142 pb-1 of positron–proton collisions, at a centre-of-mass energy of 318 GeV. Cross-sections have been extracted for 2 > 575 GeV2. A much improved precision with respect to the previous ZEUS publication, which used only 16.7 pb-1 of electron–proton collisions and 65.1 pb-1 of positron–proton collisions, is achieved, owing to the large data sample and improved kinematic reconstruction methods. The measurement is well-described by different theory predictions.

  15. Measurement of the spectral functions of vector current hadronic $\\tau$ decays

    CERN Document Server

    Barate, R; Décamp, D; Ghez, P; Goy, C; Lees, J P; Lucotte, A; Minard, M N; Nief, J Y; Pietrzyk, B; Casado, M P; Chmeissani, M; Comas, P; Crespo, J M; Delfino, M C; Fernández, E; Fernández-Bosman, M; Garrido, L; Juste, A; Martínez, M; Miquel, R; Mir, L M; Orteu, S; Padilla, C; Park, I C; Pascual, A; Perlas, J A; Riu, I; Sánchez, F; Teubert, F; Colaleo, A; Creanza, D; De Palma, M; Gelao, G; Iaselli, Giuseppe; Maggi, G; Maggi, M; Marinelli, N; Nuzzo, S; Ranieri, A; Raso, G; Ruggieri, F; Selvaggi, G; Silvestris, L; Tempesta, P; Tricomi, A; Zito, G; Huang, X; Lin, J; Ouyang, Q; Wang, T; Xie, Y; Xu, R; Xue, S; Zhang, J; Zhang, L; Zhao, W; Abbaneo, D; Alemany, R; Becker, U; Bazarko, A O; Bright-Thomas, P G; Cattaneo, M; Cerutti, F; Drevermann, H; Forty, Roger W; Frank, M; Hagelberg, R; Harvey, J; Janot, P; Jost, B; Kneringer, E; Knobloch, J; Lehraus, Ivan; Lutters, G; Mato, P; Minten, Adolf G; Moneta, L; Pacheco, A; Pusztaszeri, J F; Ranjard, F; Rensing, P E; Rizzo, G; Rolandi, Luigi; Schlatter, W D; Schmitt, M; Schneider, O; Tejessy, W; Tomalin, I R; Wachsmuth, H W; Wagner, A; Ajaltouni, Ziad J; Barrès, A; Boyer, C; Falvard, A; Ferdi, C; Gay, P; Guicheney, C; Henrard, P; Jousset, J; Michel, B; Monteil, S; Montret, J C; Pallin, D; Perret, P; Podlyski, F; Proriol, J; Rosnet, P; Rossignol, J M; Fearnley, Tom; Hansen, J B; Hansen, J D; Hansen, J R; Hansen, P H; Nilsson, B S; Rensch, B; Wäänänen, A; Daskalakis, G; Kyriakis, A; Markou, C; Simopoulou, Errietta; Siotis, I; Vayaki, Anna; Blondel, A; Bonneaud, G R; Brient, J C; Bourdon, P; Rougé, A; Rumpf, M; Valassi, Andrea; Verderi, M; Videau, H L; Candlin, D J; Parsons, M I; Focardi, E; Parrini, G; Zachariadou, K; Corden, M; Georgiopoulos, C H; Jaffe, D E; Antonelli, A; Bencivenni, G; Bologna, G; Bossi, F; Campana, P; Capon, G; Casper, David William; Chiarella, V; Felici, G; Laurelli, P; Mannocchi, G; Murtas, F; Murtas, G P; Passalacqua, L; Pepé-Altarelli, M; Curtis, L; Dorris, S J; Halley, A W; Knowles, I G; Lynch, J G; O'Shea, V; Raine, C; Scarr, J M; Smith, K; Teixeira-Dias, P; Thompson, A S; Thomson, E; Thomson, F; Turnbull, R M; Geweniger, C; Graefe, G; Hanke, P; Hansper, G; Hepp, V; Kluge, E E; Putzer, A; Schmidt, M; Sommer, J; Tittel, K; Werner, S; Wunsch, M; Beuselinck, R; Binnie, David M; Cameron, W; Dornan, Peter J; Girone, M; Goodsir, S M; Martin, E B; Moutoussi, A; Nash, J; Sedgbeer, J K; Stacey, A M; Williams, M D; Dissertori, G; Girtler, P; Kuhn, D; Rudolph, G; Betteridge, A P; Bowdery, C K; Colrain, P; Crawford, G; Finch, A J; Foster, F; Hughes, G; Sloan, Terence; Williams, M I; Galla, A; Giehl, I; Greene, A M; Hoffmann, C; Jakobs, K; Kleinknecht, K; Quast, G; Renk, B; Rohne, E; Sander, H G; Van Gemmeren, P; Zeitnitz, C; Aubert, Jean-Jacques; Benchouk, C; Bonissent, A; Bujosa, G; Calvet, D; Carr, J; Coyle, P; Diaconu, C A; Etienne, F; Konstantinidis, N P; Leroy, O; Motsch, F; Payre, P; Rousseau, D; Talby, M; Sadouki, A; Thulasidas, M; Trabelsi, K; Aleppo, M; Ragusa, F; Berlich, R; Blum, Walter; Büscher, V; Dietl, H; Dydak, Friedrich; Ganis, G; Gotzhein, C; Kroha, H; Lütjens, G; Lutz, Gerhard; Männer, W; Moser, H G; Richter, R H; Rosado-Schlosser, A; Schael, S; Settles, Ronald; Seywerd, H C J; Saint-Denis, R; Stenzel, H; Wiedenmann, W; Wolf, G; Boucrot, J; Callot, O; Chen, S; Choi, Y; Cordier, A; Davier, M; Duflot, L; Grivaz, J F; Heusse, P; Höcker, A; Jacholkowska, A; Jacquet, M; Kim, D W; Le Diberder, F R; Lefrançois, J; Lutz, A M; Nikolic, I A; Schune, M H; Simion, S; Tournefier, E; Veillet, J J; Videau, I; Zerwas, D; Azzurri, P; Bagliesi, G; Batignani, G; Bettarini, S; Bozzi, C; Calderini, G; Carpinelli, M; Ciocci, M A; Ciulli, V; Dell'Orso, R; Fantechi, R; Ferrante, I; Foà, L; Forti, F; Giassi, A; Giorgi, M A; Gregorio, A; Ligabue, F; Lusiani, A; Marrocchesi, P S; Messineo, A; Palla, Fabrizio; Sanguinetti, G; Sciabà, A; Spagnolo, P; Steinberger, Jack; Tenchini, Roberto; Tonelli, G; Vannini, C; Venturi, A; Verdini, P G; Blair, G A; Bryant, L M; Chambers, J T; Gao, Y; Green, M G; Medcalf, T; Perrodo, P; Strong, J A; Von Wimmersperg-Töller, J H; Botterill, David R; Clifft, R W; Edgecock, T R; Haywood, S; Maley, P; Norton, P R; Thompson, J C; Wright, A E; Bloch-Devaux, B; Colas, P; Emery, S; Kozanecki, Witold; Lançon, E; Lemaire, M C; Locci, E; Pérez, P; Rander, J; Renardy, J F; Roussarie, A; Schuller, J P; Schwindling, J; Trabelsi, A; Vallage, B; Black, S N; Dann, J H; Johnson, R P; Kim, H Y; Litke, A M; McNeil, M A; Taylor, G; Booth, C N; Boswell, R; Brew, C A J; Cartwright, S L; Combley, F; Kelly, M S; Lehto, M H; Newton, W M; Reeve, J; Thompson, L F; Böhrer, A; Brandt, S; Cowan, G D; Grupen, Claus; Saraiva, P; Smolik, L; Stephan, F; Apollonio, M; Bosisio, L; Della Marina, R; Giannini, G; Gobbo, B; Musolino, G; Rothberg, J E; Wasserbaech, S R; Armstrong, S R; Charles, E; Elmer, P; Ferguson, D P S; Gao, Y S; González, S; Greening, T C; Hayes, O J; Hu, H; Jin, S; McNamara, P A; Nachtman, J M; Nielsen, J; Orejudos, W; Pan, Y B; Saadi, Y; Scott, I J; Walsh, J; Wu Sau Lan; Wu, X; Yamartino, J M; Zobernig, G

    1997-01-01

    A measurement of the spectral functions of non-strange tau vector current final states is presented, using 124,358 tau pairs recorded by the ALEPH detector at LEP during the years 1991 to 1994. The spectral functions of the dominant two- and four-pion tau decay channels are compared to published results of e+e- annihilation experiments via isospin rotation. A combined fit of the pion form factor from tau decays and e+e- data is performed using different parametrizations. The mass and the width of the charged and the neutral rho(770) are separately determined in order to extract possible isospin violating effects. The mass and width differences are measured to be M(rho^+/-(770)) - M(rho^0(770)) = (0.0 +/- 1.0) MeV/c^2 and Gamma(rho^+/-(770)) - Gamma(rho^0(770)) = (0.1 +/- 1.9) MeV/c^2.

  16. Reconstruction of the ion plasma parameters from the current measurements: mathematical tool

    Directory of Open Access Journals (Sweden)

    E. Séran

    Full Text Available Instrument d’Analyse du Plasma (IAP is one of the instruments of the newly prepared ionospheric mission Demeter. This analyser was developed to measure flows of thermal ions at the altitude of ~ 750 km and consists of two parts: (i retarding potential analyser (APR, which is utilised to measure the energy distribution of the ion plasma along the sensor look direction, and (ii velocity direction analyser (ADV, which is used to measure the arrival angle of the ion flow with respect to the analyser axis. The necessity to obtain quick and precise estimates of the ion plasma parameters has prompted us to revise the existing mathematical tool and to investigate different instrumental limitations, such as (i finite angular aperture, (ii grid transparency, (iii potential depression in the space between the grid wires, (iv losses of ions during their passage between the entrance diaphragm and the collector. Simple analytical expressions are found to fit the currents, which are measured by the APR and ADV collectors, and show a very good agreement with the numerical solutions. It was proven that the fitting of the current with the model functions gives a possibility to properly resolve even minor ion concentrations and to find the arrival angles of the ion flow in the multi-species plasma. The discussion is illustrated by an analysis of the instrument response in the ionospheric conditions which are predicted by the International Reference Ionosphere (IRI model.

    Key words. Ionosphere (plasma convection; instruments and techniques – Space plasma physics (experimental and mathematical techniques

  17. Current status and Future Works in Dynamic Control Rod Worth Measurement Method in KOREA

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eun-ki; Shin, Ho-chul [Korea Hydro Nuclear Power Co. Central Research Inst, Daejeon (Korea, Republic of)

    2015-10-15

    Actually all ex-core detector signal data processing and extracting the final conclusion about the single control bank was performed by the 3rd generation of Digital Reactivity Computer System (DRCS). From 2006 to 2016, about 250 control bank worths were measured and the difference between measured and calculated worth of individual bank were several % and total rod worth differences of each cycle were less than 3%. However there were a few odd cases showing the individual difference greater than 15% which is the criteria. And some OPR1000 nuclear power plants built recently use fission chambers instead of traditional uncompensated ion chambers. To consider those conditions, any modification of the DCRM method and DRCS were requested. In this paper, short description about DCRM method, current status of DCRM modification and future works are discussed. About 10 cases among about 250 control bank worth measurement with original DCRM method with UIC signals result in very heavy fluctuation on reactivity curve and the difference approaches 15%, the individual limit. The electrometer signals processing method were the main cause. To overcome this problem, a modified reactivity computer system using own current treatment logic was designed. It shows the reactivity fluctuation can be reduced dramatically in case of UIC signal. Recently the modified DRCS coupled INVESE code applied Westinghouse 2 Loop plant and gave very good results except a control bank whose measured rod worth was shown of 18% difference from the estimated value. The results were same for three repeat tests. All possible causes are examined from computer codes to detail data acquisition system.

  18. Current use and barriers and facilitators for implementation of standardised measures in physical therapy in the Netherlands

    Directory of Open Access Journals (Sweden)

    Wittink Harriet

    2011-05-01

    Full Text Available Abstract Background In many countries, the need for physical therapists to use standardised measures has been recognised and is recommended in clinical practice guidelines. Research has shown a lack of clinimetric knowledge and clinical application of measurement instruments in daily practice may hamper implementation of these guidelines. Objectives The aims of our study were a to investigate the current use of measurement instruments by Dutch physical therapists; b to investigate the facilitators and barriers in using measurement instruments. Methods To get a complete and valid overview of relevant barriers and facilitators, different methods of data collection were used. We conducted a literature search, semi-structured interviews with 20 physical therapists and an online survey. Results Facilitators are the fact that most therapists indicated a positive attitude and were convinced of the advantages of the use of measurement instruments. The most important barriers to the use of measurement instruments included physical therapists' competence and problems in changing behaviour, practice organisation (no room; no time and the unavailability and feasibility of measurement instruments. Furthermore, physical therapists indicated the need to have a core set of measurement instruments with a short user's instruction on application, scoring and interpretation. Conclusions The main barriers are on the level of the physical therapist (lack of knowledge; not focusing on the use of outcome measures and organisation (lack of time; availability; lack of management support. There seems to be a disparity between what physical therapists say and what they do. The majority of participating physical therapists indicated a positive attitude and were convinced of the advantages of the use of measurement instruments. However, the main problem for physical therapists is when to use which instrument for what patient (lack of knowledge. Furthermore, physical

  19. Experimental study of blockage of monochromatic waves by counter currents

    NARCIS (Netherlands)

    Suastika, I.K.

    1999-01-01

    Blockage of waves by a current can occur if waves are propagating on a spatially varying opposing current in which the velocity is increasing in the wave propagation direction. The ongoing waves become shorter and steeper while they are propagating against the current. Blocking occurs at the

  20. Langmuir probe study in the nonresonant current drive regime of helicon discharge

    Indian Academy of Sciences (India)

    Manash Kumar Paul; Dhiraj Bora

    2008-07-01

    Characterization of the current drive regime is done for helicon wave-generated plasma in a torus, at a very high operating frequency. A radiofrequency-compensated Langmuir probe is designed and used for the measurement of plasma parameters along with the electron energy distributions in radial scans of the plasma. The electron energy distribution patterns obtained in the operational regime suggest that Landau damping cannot be responsible for the efficient helicon discharge in the present study. A typical peaked radial density profile, high plasma temperature and absence of an appreciable amount of energetic electrons for resonant wave–particle interactions, suggest that the chosen operational regime is suitable for the study of nonresonant current drive by helicon wave. Successful and significant current drive achieved in our device clearly demonstrates the capability of nonresonant current drive by helicon waves in the present operational regime.

  1. Measurement of Neutral-Current K^{+} Production by Neutrinos using MINERvA.

    Science.gov (United States)

    Marshall, C M; Aliaga, L; Altinok, O; Bellantoni, L; Bercellie, A; Betancourt, M; Bodek, A; Bravar, A; Cai, T; Carneiro, M F; da Motta, H; Dytman, S A; Díaz, G A; Dunkman, M; Eberly, B; Endress, E; Felix, J; Fields, L; Fine, R; Gago, A M; Galindo, R; Gallagher, H; Ghosh, A; Golan, T; Gran, R; Harris, D A; Higuera, A; Hurtado, K; Kleykamp, J; Kordosky, M; Le, T; Maher, E; Manly, S; Mann, W A; Caicedo, D A Martinez; McFarland, K S; McGivern, C L; McGowan, A M; Messerly, B; Miller, J; Mislivec, A; Morfín, J G; Mousseau, J; Naples, D; Nelson, J K; Norrick, A; Nuruzzaman; Paolone, V; Patrick, C E; Perdue, G N; Ramírez, M A; Ransome, R D; Ray, H; Ren, L; Rimal, D; Rodrigues, P A; Ruterbories, D; Schmitz, D W; Solano Salinas, C J; Sultana, M; Sánchez Falero, S; Valencia, E; Walton, T; Wolcott, J; Wospakrik, M; Yaeggy, B; Zhang, D

    2017-07-07

    Neutral-current production of K^{+} by atmospheric neutrinos is a background in searches for the proton decay p→K^{+}ν[over ¯]. Reactions such as νp→νK^{+}Λ are indistinguishable from proton decays when the decay products of the Λ are below detection threshold. Events with K^{+} are identified in MINERvA by reconstructing the timing signature of a K^{+} decay at rest. A sample of 201 neutrino-induced neutral-current K^{+} events is used to measure differential cross sections with respect to the K^{+} kinetic energy, and the non-K^{+} hadronic visible energy. An excess of events at low hadronic visible energy is observed relative to the prediction of the neut event generator. Good agreement is observed with the cross section prediction of the genie generator. A search for photons from π^{0} decay, which would veto a neutral-current K^{+} event in a proton decay search, is performed, and a 2σ deficit of detached photons is observed relative to the genie prediction.

  2. Temperature and current dependent electroluminescence measurements on colour-coded multiple quantum well light emitting diodes

    Energy Technology Data Exchange (ETDEWEB)

    Bergbauer, Werner [OSRAM Opto Semiconductors GmbH, Regensburg (Germany); FH Deggendorf (Germany); Laubsch, Ansgar; Peter, Matthias; Mayer, Tobias; Bader, Stefan; Oberschmid, Raimund; Hahn, Berthold [OSRAM Opto Semiconductors GmbH, Regensburg (Germany); Benstetter, Guenther [FH Deggendorf (Germany)

    2008-07-01

    As the efficiency and the luminous flux have been increased enormously in the last few years, today Light Emitting Diodes (LEDs) are even pushed to applications like general lighting and Home Cinema Projection. Still, InGaN/GaN heterostructure based LEDs suffer from loss-mechanisms like non-radiative defect and Auger recombination, carrier leakage and piezo-field induced carrier separation. To optimize the high current efficiency we evaluated the benefit of Multiple Quantum Well (MQW) compared to Single Quantum Well (SQW) LEDs. Temperature dependent electroluminescence of colour-coded structures with different Indium content in certain Quantum Wells was measured. The experiments demonstrated a strong temperature and current dependence of the MQW operation. The comparison between different LED structures showed effectively the increased LED performance of those structures which operate with a well adjusted MQW active area. Due to the enhanced carrier distribution in the high current range, these LEDs show a higher light output and additionally a reduced wavelength shift.

  3. A one-item question with a Likert or Visual Analog Scale adequately measured current anxiety.

    Science.gov (United States)

    Davey, Heather M; Barratt, Alexandra L; Butow, Phyllis N; Deeks, Jonathan J

    2007-04-01

    To determine whether a single question with a Likert Scale or a Visual Analog Scale (VAS) response adequately measures current anxiety. Consecutive English-speaking adult women attending a dedicated breast clinic in a major Australian city were invited to complete a demographic questionnaire, the State Trait Anxiety Inventory (STAI), and a single question with a five-point Likert Scale response and a VAS in random order. Only women who completed the STAI were included in analyses. Four hundred of 497 (80%) eligible women agreed to participate. Both measures were adequate predictors of the STAI score; correlation with STAI was 0.78 (95% confidence interval [CI] 0.73-0.82) for the VAS and 0.75 (95% CI 0.70-0.79) for the Likert Scale. However, 11% of women incorrectly completed the VAS limiting its usefulness. A single question with either a Likert Scale or VAS response may be an adequate replacement for the STAI. Both measures quickly and easily assess anxiety and may be useful for research purposes when researchers have very limited time or questionnaire space or need to reduce the burden on participants of completing many measures.

  4. Precision Neutral Current Asymmetry Parameter Measurements from the Tau Polarization at LEP

    CERN Document Server

    Abbiendi, G.; Akesson, P.F.; Alexander, G.; Allison, John; Anagnostou, G.; Anderson, K.J.; Arcelli, S.; Asai, S.; Axen, D.; Azuelos, G.; Bailey, I.; Ball, A.H.; Barberio, E.; Barlow, Roger J.; Batley, R.J.; Behnke, T.; Bell, Kenneth Watson; Bella, G.; Bellerive, A.; Benelli, G.; Bethke, S.; Biebel, O.; Bloodworth, I.J.; Boeriu, O.; Bock, P.; Bohme, J.; Bonacorsi, D.; Boutemeur, M.; Braibant, S.; Brigliadori, L.; Brown, Robert M.; Burckhart, H.J.; Cammin, J.; Capiluppi, P.; Carnegie, R.K.; Caron, B.; Carter, A.A.; Carter, J.R.; Chang, C.Y.; Charlton, David G.; Clarke, P.E.L.; Clay, E.; Cohen, I.; Couchman, J.; Csilling, A.; Cuffiani, M.; Dado, S.; Dallavalle, G.Marco; Dallison, S.; De Roeck, A.; De Wolf, E.A.; Dervan, P.; Desch, K.; Dienes, B.; Dixit, M.S.; Donkers, M.; Dubbert, J.; Duchovni, E.; Duckeck, G.; Duerdoth, I.P.; Estabrooks, P.G.; Etzion, E.; Fabbri, F.; Fanti, M.; Feld, L.; Ferrari, P.; Fiedler, F.; Fleck, I.; Ford, M.; Frey, A.; Furtjes, A.; Futyan, D.I.; Gagnon, P.; Gary, J.W.; Gaycken, G.; Geich-Gimbel, C.; Giacomelli, G.; Giacomelli, P.; Glenzinski, D.; Goldberg, J.; Grandi, C.; Graham, K.; Gross, E.; Grunhaus, J.; Gruwe, M.; Gunther, P.O.; Gupta, A.; Hajdu, C.; Hanson, G.G.; Harder, K.; Harel, A.; Harin-Dirac, M.; Hauschild, M.; Hawkes, C.M.; Hawkings, R.; Hemingway, R.J.; Hensel, C.; Herten, G.; Heuer, R.D.; Hill, J.C.; Hoffman, Kara Dion; Homer, R.J.; Honma, A.K.; Horvath, D.; Hossain, K.R.; Howard, R.; Huntemeyer, P.; Igo-Kemenes, P.; Ishii, K.; Jawahery, A.; Jeremie, H.; Jones, C.R.; Jovanovic, P.; Junk, T.R.; Kanaya, N.; Kanzaki, J.; Karapetian, G.; Karlen, D.; Kartvelishvili, V.; Kawagoe, K.; Kawamoto, T.; Keeler, R.K.; Kellogg, R.G.; Kennedy, B.W.; Kim, D.H.; Klein, K.; Klier, A.; Kluth, S.; Kobayashi, T.; Kobel, M.; Kokott, T.P.; Komamiya, S.; Kowalewski, Robert V.; Kamer, T.; Kress, T.; Krieger, P.; von Krogh, J.; Krop, D.; Kuhl, T.; Kupper, M.; Kyberd, P.; Lafferty, G.D.; Landsman, H.; Lanske, D.; Lawson, I.; Layter, J.G.; Leins, A.; Lellouch, D.; Letts, J.; Levinson, L.; Liebisch, R.; Lillich, J.; Littlewood, C.; Lloyd, A.W.; Lloyd, S.L.; Loebinger, F.K.; Long, G.D.; Losty, M.J.; Lu, J.; Ludwig, J.; Macchiolo, A.; Macpherson, A.; Mader, W.; Marcellini, S.; Marchant, T.E.; Martin, A.J.; Martin, J.P.; Martinez, G.; Mashimo, T.; Mattig, Peter; McDonald, W.John; McKenna, J.; McMahon, T.J.; McPherson, R.A.; Meijers, F.; Mendez-Lorenzo, P.; Menges, W.; Merritt, F.S.; Mes, H.; Michelini, A.; Mihara, S.; Mikenberg, G.; Miller, D.J.; Mohr, W.; Montanari, A.; Mori, T.; Nagai, K.; Nakamura, I.; Neal, H.A.; Nisius, R.; O'Neale, S.W.; Oakham, F.G.; Odorici, F.; Oh, A.; Okpara, A.; Oreglia, M.J.; Orito, S.; Pahl, C.; Pasztor, G.; Pater, J.R.; Patrick, G.N.; Pilcher, J.E.; Pinfold, J.; Plane, David E.; Poli, B.; Polok, J.; Pooth, O.; Quadt, A.; Rabbertz, K.; Rembser, C.; Renkel, P.; Rick, H.; Rodning, N.; Roney, J.M.; Rosati, S.; Roscoe, K.; Rossi, A.M.; Rozen, Y.; Runge, K.; Runolfsson, O.; Rust, D.R.; Sachs, K.; Saeki, T.; Sahr, O.; Sarkisian, E.K.G.; Sbarra, C.; Schaile, A.D.; Schaile, O.; Scharff-Hansen, P.; Schroder, Matthias; Schumacher, M.; Schwick, C.; Scott, W.G.; Seuster, R.; Shears, T.G.; Shen, B.C.; Shepherd-Themistocleous, C.H.; Sherwood, P.; Siroli, G.P.; Skuja, A.; Smith, A.M.; Snow, G.A.; Sobie, R.; Soldner-Rembold, S.; Spagnolo, S.; Spano, F.; Sproston, M.; Stahl, A.; Stephens, K.; Strom, David M.; Strohmer, R.; Stumpf, L.; Surrow, B.; Talbot, S.D.; Tarem, S.; Tasevsky, M.; Taylor, R.J.; Teuscher, R.; Thomas, J.; Thomson, M.A.; Torrence, E.; Towers, S.; Toya, D.; Trefzger, T.; Trigger, I.; Trocsanyi, Z.; Tsur, E.; Turner-Watson, M.F.; Ueda, I.; Vachon, B.; Vollmer, C.F.; Vannerem, P.; Verzocchi, M.; Voss, H.; Vossebeld, J.; Waller, D.; Ward, C.P.; Ward, D.R.; Watkins, P.M.; Watson, A.T.; Watson, N.K.; Wells, P.S.; Wengler, T.; Wermes, N.; Wetterling, D.; White, J.S.; Wilson, G.W.; Wilson, J.A.; Wyatt, T.R.; Yamashita, S.; Zacek, V.; Zer-Zion, D.

    2001-01-01

    Measurements of the tau lepton polarization and forward-backward polarization asymmetry near the Z resonance using the OPAL detector are described. The measurements are based on analyses of tau -> e nu_e nu_tau, tau -> mu nu_mu nu_tau, tau -> pi nu_tau, tau -> rho nu_tau and tau -> a1 nu_tau decays from a sample of 144810 e+e- -> tau+ tau- candidates corresponding to an integrated luminosity of 151 pb-1. Assuming that the tau lepton decays according to V-A theory, we measure the average tau polarization near Ecm = MZ to be = (-14.10 +/- 0.73 +/- 0.55)% and the tau polarization forward-backward asymmetry to be Afb = (-10.55 +/- 0.76 +/- 0.25)%, where the first error is statistical and the second systematic. Taking into account the small effects of the photon propagator, photon-Z interference and photonic radiative corrections, these results can be expressed in terms of the lepton neutral current asymmetry parameters: Atau = 0.1456 +/- 0.0076 +/- 0.0057, Ae = 0.1454 +/- 0.0108 +/- 0.0036. These measurements ar...

  5. Correcting acoustic Doppler current profiler discharge measurements biased by sediment transport

    Science.gov (United States)

    Mueller, D.S.; Wagner, C.R.

    2007-01-01

    A negative bias in discharge measurements made with an acoustic Doppler current profiler (ADCP) is attributed to the movement of sediment on or near the streambed, and is an issue widely acknowledged by the scientific community. The integration of a differentially corrected global positioning system (DGPS) to track the movement of the ADCP can be used to avoid the systematic bias associated with a moving bed. DGPS, however, cannot provide consistently accurate positions because of multipath errors and satellite signal reception problems on waterways with dense tree canopy along the banks, in deep valleys or canyons, and near bridges. An alternative method of correcting for the moving-bed bias, based on the closure error resulting from a two-way crossing of the river, is presented. The uncertainty in the mean moving-bed velocity measured by the loop method is shown to be approximately 0.6cm/s. For the 13 field measurements presented, the loop method resulted in corrected discharges that were within 5% of discharges measured utilizing DGPS to compensate for moving-bed conditions. ?? 2007 ASCE.

  6. Optical timing studies of isolated neutron stars: Current Status

    CERN Document Server

    Mignani, R P

    2010-01-01

    Being fast rotating objects, Isolated Neutron Stars (INSs) are natural targets for high-time resolution observations across the whole electromagnetic spectrum. With the number of objects detected at optical (plus ultraviolet and infrared) wavelengths now increased to 24, high-time resolution observations of INSs at these wavelengths are becoming more and more important. While classical rotation-powered radio pulsars, like the Crab and Vela pulsars, have been the first INSs studied at high-time resolution in the optical domain, observations performed in the last two decades have unveiled potential targets in other types of INSs which are not rotation powered, although their periodic variability is still related to the neutron star rotation. In this paper I review the current status of high-time resolution observations of INSs in the optical domain for different classes of objects: rotation-powered pulsars, magnetars, thermally emitting neutron stars, and rapid radio transients, I describe their timing properti...

  7. Numerical Study on the Bifurcation of the North Equatorial Current

    Institute of Scientific and Technical Information of China (English)

    LIU Yulong; WANG Qi; SONG Jun; ZHU Xiande; GONG Xiaoqing; WU Fang

    2011-01-01

    A 1.5-layer reduced-gravity model forced by wind stress is used to study the bifurcations of the North Equatorial Current (NEC).The authors found that after removing the Ekman drift,the modelled circulations can serve well as a proxy of the SODA circulations on the σθ=25.0kgm-3 potential density surface based on available long-term reanalysis wind stress data.The modelled results show that the location of the western boundary bifurcation of the NEC depends on both zonal averaged and local zero wind stress curl latitude.The effects of the anomalous wind stress curl added in different areas are also investigated and it is found that they can change the strength of the Mindanao Eddy (ME),and then influence the interior pathway.

  8. Backside calibration chronopotentiometry: using current to perform ion measurements by zeroing the transmembrane ion flux.

    Science.gov (United States)

    Xu, Yida; Ngeontae, Wittaya; Pretsch, Ernö; Bakker, Eric

    2008-10-01

    A recent new direction in ion-selective electrode (ISE) research utilizes a stir effect to indicate the disappearance of an ion concentration gradient across a thin ion-selective membrane. This zeroing experiment allows one to evaluate the equilibrium relationship between front and backside solutions contacting the membrane by varying the backside solution composition. This method is attractive since the absolute potential during the measurement is not required, thus avoiding standard recalibrations from the sample solution and a careful control of the reference electrode potential. We report here on a new concept to alleviate the need to continuously vary the composition of the backside solution. Instead, transmembrane ion fluxes are counterbalanced at an imposed critical current. A theoretical model illustrates the relationship between the magnitude of this critical current and the concentration of analyte and countertransporting ions and is found to correspond well with experimental results. The approach is demonstrated with lead(II)-selective membranes and protons as dominating interference ions, and the concentration of Pb(2+) was successfully measured in tap water samples. The principle was further evaluated with calcium-selective membranes and magnesium as counterdiffusing species, with good results. Advantages and limitations arising from the kinetic nature of the perturbation technique are discussed.

  9. Current Fluctuation Measurements of Amperometric Gas Sensors Constructed with Three Different Technology Procedures

    Directory of Open Access Journals (Sweden)

    Sedlak Petr

    2016-12-01

    Full Text Available Electrochemical amperometric gas sensors represent a well-established and versatile type of devices with unique features: good sensitivity and stability, short response/recovery times, and low power consumption. These sensors operate at room temperature, and therefore have been applied in monitoring air pollutants and detection of toxic and hazardous gases in a number of areas. Some drawbacks of classical electrochemical sensors are overcome by the solid polymer electrolyte (SPE based on ionic liquids. This work presents evaluation of an SPE-based amperometric sensor from the point of view of current fluctuations. The sensor is based on a novel three-electrode sensor platform with solid polymer electrolytes containing ionic liquid for detection of nitrogen dioxide − a highly toxic gas that is harmful to the environment and presenting a possible threat to human health even at low concentrations. The paper focuses on using noise measurement (electric current fluctuation measurement for evaluation of electrochemical sensors which were constructed by different fabrication processes: (i lift-off and drop-casting technology, (ii screen printing technology on a ceramic substrate and (iii screen printing on a flexible substrate.

  10. Comparative study of Cu(In,Ga)Se{sub 2}/(PVD)In{sub 2}S{sub 3} and Cu(In,Ga)Se{sub 2}/(CBD)CdS heterojunction based solar cells by admittance spectroscopy, current-voltage and spectral response measurements

    Energy Technology Data Exchange (ETDEWEB)

    Darga, A. [Laboratoire de Genie Electrique de Paris, CNRS UMR8507, SUPELEC, UPMC Univ Paris 06, Univ Paris-Sud, 11 rue Joliot-Curie, Plateau de Moulon, F-91192 Gif-sur-Yvette Cedex (France)], E-mail: arouna.darga@lgep.supelec.fr; Mencaraglia, D.; Djebbour, Z.; Dubois, A. Migan; Chouffot, R.; Serhan, J. [Laboratoire de Genie Electrique de Paris, CNRS UMR8507, SUPELEC, UPMC Univ Paris 06, Univ Paris-Sud, 11 rue Joliot-Curie, Plateau de Moulon, F-91192 Gif-sur-Yvette Cedex (France); Couzinie-Devy, F.; Barreau, N.; Kessler, J. [Institut des Materiaux Jean Rouxel (IMN)-UMR 6502, Universite de Nantes, CNRS, 2 rue de la Houssiniere, BP 32229, 44322 Nantes cedex 3 (France)

    2009-02-02

    Co-evaporated Cu(In,Ga)Se{sub 2} (CIGSe) based solar cells with Physical Vapour Deposited (PVD) Indium Sulphide (In{sub 2}S{sub 3}) as buffer layer have been studied by admittance spectroscopy and current-voltage characteristics measurements. The results have been compared to those obtained with a reference CBD-CdS/CIGSe device. In darkness, the PVD-In{sub 2}S{sub 3} buffer layer devices exhibit higher densities of trapping defects and low values of shunt resistance. However, under illumination we have observed an important improvement of the In{sub 2}S{sub 3}/CIGSe electronic transport properties. This behavior seems to be linked to the presence of a metastable defect with activation energy of 0.3 eV.

  11. Challenges in Measuring External Currents Driven by the Solar Wind-Magnetosphere Interaction

    Science.gov (United States)

    Le, Guan; Slavin, James A.; Pfaff, Robert F.

    2014-01-01

    In studying the Earth's geomagnetism, it has always been a challenge to separate magnetic fields from external currents originating from the ionosphere and magnetosphere. While the internal magnetic field changes very slowly in time scales of years and more, the ionospheric and magnetospheric current systems driven by the solar wind -magnetosphere interaction are very dynamic. They are intimately controlled by the ionospheric electrodynamics and ionospheremagnetosphere coupling. Single spacecraft observations are not able to separate their spatial and temporal variations, and thus to accurately describe their configurations. To characterize and understand the external currents, satellite observations require both good spatial and temporal resolutions. This paper reviews our observations of the external currents from two recent LEO satellite missions: Space Technology 5 (ST-5), NASA's first three-satellite constellation mission in LEO polar orbit, and Communications/Navigation Outage Forecasting System (C/NOFS), an equatorial satellite developed by US Air Force Research Laboratory. We present recommendations for future geomagnetism missions based on these observations.

  12. Challenges in Measuring External Currents Driven by the Solar Wind-Magnetosphere Interaction

    Directory of Open Access Journals (Sweden)

    Guan Le

    2015-01-01

    Full Text Available In studying the _ geomagnetism it has always been a challenge to separate the external currents originating from the ionosphere and magnetosphere. While the internal magnetic field changes very slowly in time scales of years and more, the ionospheric and magnetospheric current systems driven by the solar wind-magnetosphere interaction are very dynamic. They are intimately controlled by the ionospheric electrodynamics and ionosphere-magnetosphere coupling. Single spacecraft observations are not able to separate their spatial and temporal variations, and thus to accurately describe their configurations. To characterize and understand the external currents, satellite observations require both good spatial and temporal resolutions. This paper reviews our observations of the external currents from two recent Low Earth Orbit (LEO satellite missions: Space Technology 5 (ST-5, _ first three-satellite constellation mission in LEO polar orbit and Communications/Navigation Outage Forecasting System (C/NOFS, an equatorial satellite developed by the US Air Force Research Laboratory. We present recommendations for future geomagnetism missions based on these observations.

  13. Measurement of Neutral Current Neutral Pion Production on Carbon in a Few-GeV Neutrino Beam

    Energy Technology Data Exchange (ETDEWEB)

    Kurimoto, Yoshinori [Kyoto Univ. (Japan)

    2010-01-01

    Understanding of the π0 production via neutrino-nucleus neutral current interaction in the neutrino energy region of a few GeV is essential for the neutrino oscillation experiments. In this thesis, we present a study of neutral current π0 production from muon neutrinos scattering on a polystyrene (C8H8) target in the SciBooNE experiment. All neutrino beam data corresponding to 0.99 × 1020 protons on target have been analyzed. We have measured the cross section ratio of the neutral current π0 production to the total charge current interaction and the π0 kinematic distribution such as momentum and direction. We obtain [7.7 ± 0.5(stat.) ± 0.5(sys.)] × 10-2 as the ratio of the neutral current neutral pion production to total charged current cross section; the mean energy of neutrinos producing detected neutral pions is 1.1 GeV. The result agrees with the Rein- Sehgal model, which is generally used for the Monte Carlo simulation by many neutrino oscillation experiments. We achieve less than 10 % uncertainty which is required for the next generation search for νµ → νe oscillation. The spectrum shape of the π0 momentum and the distribution of the π0 emitted angle agree with the prediction, which means that not only the Rein-Sehgal model but also the intra-nuclear interaction models describe our data well. We also measure the ratio of the neutral current coherent pion production to total charged current cross section to be (1.17 ± 0.23 ) × 10-2 based on the Rein and Sehgal model. The result gives the evidence for non-zero coherent pion production via neutral current interaction at the mean neutrino energy of 1.0 GeV.

  14. Lateral critical current distribution and self-field profile of Bi-2223/Ag conductors: measurements and calculations

    NARCIS (Netherlands)

    Demencik, E.; Usak, P.; Polak, M.; Piel, H.; Dhalle, M.

    2006-01-01

    The lateral current distribution and the magnetic self-field induced by a transport current were measured independently in three multifilament Bi-2223/Ag tapes with qualitatively different filament layouts. The current and field data from these two experiments, magnetic knife and scanning Hall probe

  15. Lateral critical current distribution and self-field profile of Bi-2223/Ag conductors: measurements and calculations

    NARCIS (Netherlands)

    Demencik, E.; Usak, P.; Polak, M.; Piel, H.; Dhalle, Marc M.J.

    2006-01-01

    The lateral current distribution and the magnetic self-field induced by a transport current were measured independently in three multifilament Bi-2223/Ag tapes with qualitatively different filament layouts. The current and field data from these two experiments, magnetic knife and scanning Hall

  16. Multiday Transcranial Direct Current Stimulation Causes Clinically Insignificant Changes in Childhood Dystonia: A Pilot Study.

    Science.gov (United States)

    Bhanpuri, Nasir H; Bertucco, Matteo; Young, Scott J; Lee, Annie A; Sanger, Terence D

    2015-10-01

    Abnormal motor cortex activity is common in dystonia. Cathodal transcranial direct current stimulation may alter cortical activity by decreasing excitability while anodal stimulation may increase motor learning. Previous results showed that a single session of cathodal transcranial direct current stimulation can improve symptoms in childhood dystonia. Here we performed a 5-day, sham-controlled, double-blind, crossover study, where we measured tracking and muscle overflow in a myocontrol-based task. We applied cathodal and anodal transcranial direct current stimulation (2 mA, 9 minutes per day). For cathodal transcranial direct current stimulation (7 participants), 3 subjects showed improvements whereas 2 showed worsening in overflow or tracking error. The effect size was small (about 1% of maximum voluntary contraction) and not clinically meaningful. For anodal transcranial direct current stimulation (6 participants), none showed improvement, whereas 5 showed worsening. Thus, multiday cathodal transcranial direct current stimulation reduced symptoms in some children but not to a clinically meaningful extent, whereas anodal transcranial direct current stimulation worsened symptoms. Our results do not support transcranial direct current stimulation as clinically viable for treating childhood dystonia.

  17. Electric field characteristics of electroconvulsive therapy with individualized current amplitude: a preclinical study.

    Science.gov (United States)

    Lee, Won Hee; Lisanby, Sarah H; Laine, Andrew F; Peterchev, Angel V

    2013-01-01

    This study examines the characteristics of the electric field induced in the brain by electroconvulsive therapy (ECT) with individualized current amplitude. The electric field induced by bilateral (BL), bifrontal (BF), right unilateral (RUL), and frontomedial (FM) ECT electrode configurations was computed in anatomically realistic finite element models of four nonhuman primates (NHPs). We generated maps of the electric field strength relative to an empirical neural activation threshold, and determined the stimulation strength and focality at fixed current amplitude and at individualized current amplitudes corresponding to seizure threshold (ST) measured in the anesthetized NHPs. The results show less variation in brain volume stimulated above threshold with individualized current amplitudes (16-36%) compared to fixed current amplitude (30-62%). Further, the stimulated brain volume at amplitude-titrated ST is substantially lower than that for ECT with conventional fixed current amplitudes. Thus individualizing the ECT stimulus current could compensate for individual anatomical variability and result in more focal and uniform electric field exposure across different subjects compared to the standard clinical practice of using high, fixed current for all patients.

  18. Measurement of Charged Current Coherent Pion Production by Neutrinos on Carbon at MINER$\

    Energy Technology Data Exchange (ETDEWEB)

    Mislivec, Aaron Robert [Univ. of Rochester, NY (United States)

    2017-01-01

    Neutrino-nucleus coherent pion production is a rare neutrino scattering process where the squared four-momentum transferred to the nucleus is small, a lepton and pion are produced in the forward direction, and the nucleus remains in its initial state. This process is an important background in neutrino oscillation experiments. Measurements of coherent pion production are needed to constrain models which are used to predict coherent pion production in oscillation experiments. This thesis reports measurements of νµ and νµ charged current coherent pion production on carbon for neutrino energies in the range 2 < Eν < 20 GeV. The measurements were made using data from MINERνA, which is a dedicated neutrino-nucleus scattering experiment that uses a fi scintillator tracking detector in the high-intensity NuMI neutrino beam at Fermilab. Coherent interactions were isolated from the data using only model-independent signatures of the reaction, which are a forward muon and pion, no evidence of nuclear breakup, and small four-momentum transfer to the nucleus. The measurements were compared to the coherent pion production model used by oscillation experiments. The data and model agree in the total interaction rate and are similar in the dependence of the interaction rate on the squared four- momentum transferred from the neutrino. The data and model disagree significantly in the pion kinematics. The measured νµ and νµ interaction rates are consistent, which supports model predictions that the neutrino and antineutrino interaction rates are equal.

  19. Measurement of high-Q{sup 2} neutral current cross-sections with longitudinally polarised positrons with the ZEUS detector

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, Trevor P.

    2012-07-15

    The cross sections for neutral current (NC) deep inelastic scattering (DIS) in e{sup +}p collisions with a longitudinally polarised positron beam are measured at high momentum transfer squared (Q{sup 2}>185 GeV{sup 2}) at the ZEUS detector at HERA. The HERA accelerator provides e{sup {+-}}p collisions at a centre-of-mass energy of 318 GeV, which allows the weak contribution to the NC process to be studied at high Q{sup 2}. The measurements are based on a data sample with an integrated luminosity of 135.5 pb{sup -1} collected with the ZEUS detector in 2006 and 2007. The single differential NC cross sections d{sigma}/dQ{sup 2}, d{sigma}/dx and d{sigma}/dy and the reduced cross section {sigma} are measured. The structure function xF{sub 3} is determined by combining the e{sup +}p NC reduced cross sections with the previously measured e{sup -}p measurements. The interference structure function xF{sub 3}{sup {gamma}Z} is extracted at Q{sup 2}=1500 GeV{sup 2}. The cross-section asymmetry between the positive and negative polarisation of the positron beam is measured and the parity violation effects of the electroweak interaction are observed. The predictions of the Standard Model of particle physics agree well with the measurements. (orig.)

  20. Experimental Study on Current-Driven Domain Wall Motion

    Science.gov (United States)

    Ono, T.; Yamaguchi, A.; Tanigawa, H.; Yano, K.; Kasai, S.

    2006-06-01

    Current-driven domain wall (DW) motion for a well-defined single DW in a micro-fabricated magnetic wire with submicron width was investigated by real-space observation with magnetic force microscopy. Magnetic force microscopy visualizes that a single DW introduced in a wire is displaced back and forth by positive and negative pulsed-current, respectively. Effect of the Joule heating, reduction of the threshold current density by shape control, and magnetic ratchet effect are also presented.

  1. Magnetic Measurement of the Current Center Line of the Toroidal Field Coil of ITER at Room Temperature

    CERN Document Server

    Deniau, L; Buzio, M; Knaster, J; Savary, F

    2012-01-01

    Geometrical deformations and assembly errors in the ITER Toroidal Field (TF) coils will lead to magnetic field perturbations, which could degrade plasma confinement and eventually lead to disruption. Extensive computational studies of the influence of coil deformations and assembly errors on plasma behavior have given the basis for definition of the geometric tolerance of the Current Centre Line (CCL) of the winding pack of the TF coil. This paper describes an analysis method to establish the feasibility to measure the magnetic CCL locus of the final winding pack (WP) with accuracy better than 1 mm. The proposed method is based on arrays of gradient coils accurately mounted with respect to the WP fiducial marks and datum surfaces. The magnetic measurements will be performed at defined locations around the WP perimeter to characterize accurately the CCL locus. The analysis emphases the robustness and sensitivity of the method versus the measurement location and the TF coil 3D geometrical deformation. The analy...

  2. Radiation induced currents in parallel plate ionization chambers: measurement and Monte Carlo simulation for megavoltage photon and electron beams.

    Science.gov (United States)

    Abdel-Rahman, Wamied; Seuntjens, Jan P; Verhaegen, Frank; Podgorsak, Ervin B

    2006-09-01

    Polarity effects in ionization chambers are caused by a radiation induced current, also known as Compton current, which arises as a charge imbalance due to charge deposition in electrodes of ionization chambers. We used a phantom-embedded extrapolation chamber (PEEC) for measurements of Compton current in megavoltage photon and electron beams. Electron contamination of photon beams and photon contamination of electron beams have a negligible effect on the measured Compton current. To allow for a theoretical understanding of the Compton current produced in the PEEC effect we carried out Monte Carlo calculations with a modified user code, the COMPTON/ EGSnrc. The Monte Carlo calculated COMPTON currents agree well with measured data for both photon and electron beams; the calculated polarity correction factors, on the other hand, do not agree with measurement results. The conclusions reached for the PEEC can be extended to parallel-plate ionization chambers in general.

  3. Transcranial direct current stimulation in the recovery of postural control after stroke : a pilot study

    OpenAIRE

    Saeys, Wim; Vereeck, Luc; Lafosse, Christophe; Truijen, Steven; Wuyts, Floris L.; de Heyning, van, P.H.

    2015-01-01

    Abstract: Purpose: This pilot study aimed to evaluate the effectiveness of multiple sessions of transcranial Direct Current Stimulation (tDCS) during 4 weeks on balance and gait parameters after stroke. Method: Thirty-one stroke patients were included in this randomised, double-blind, sham-controlled crossover study. The Tinetti test was used to assess functional balance and gait after stroke. Secondary measures, Rivermead Motor Assessment (RMA) and Trunk Impairment Scale (TIS), were register...

  4. A Measurement of Neutrino-Induced Charged-Current Neutral Pion Production

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Robert H. [Univ. of Colorado, Boulder, CO (United States)

    2010-01-01

    This work presents the first comprehensive measurement of neutrino-induced charged-current neutral pion production (CCπ0) off a nuclear target. The Mini Booster Neutrino Experiment (MiniBooNE) and Booster Neutrino Beam (BNB) are discussed in detail. MiniBooNE is a high-statistics (~ 1, 000, 000 interactions) low-energy (Evϵ 2 0.5 - 2.0 GeV) neutrino experiment located at Fermilab. The method for selecting and reconstructing CCπ0 events is presented. The π0 and μ- are fully reconstructed in the final state allowing for the measurement of, among other things, the neutrino energy. The total observable CCπ0 cross-section is presented as a function of neutrino energy, along with five differential cross-sections in terms of the final state kinematics and Q2. The results are combined to yield a flux-averaged total cross-section of <σ>Φ = (9.2 ± 0.3stat. ± 1.5syst.) × 10-39 cm2/CH2 at energy 965 MeV. These measurements will aid future neutrino experiments with the prediction of their neutrino interaction rates.

  5. Current state of the hydrothermal geochemistry studies at Cerro Prieto

    Energy Technology Data Exchange (ETDEWEB)

    Fausto L, J.J.; Jimenez S, M.E.; Esquer P, I.

    1981-01-01

    The current state of hydrothermal geochemistry studies being carried out at the field are reported. These studies are based on the results of chemical analysis of water samples collected during 1979 and 1980 at the geothermal wells of the area known as Cerro Prieto I, as well as from those located in the Cerro Prieto II and Cerro Prieto III areas, some of which have only recently started flowing. Data are presented on the chemical variations of the main chemical constituents dissolved in the waters, as well as on the Na/K and Na-K-Ca chemical relations and the temperatures calculated from them and from SiO/sub 2/. Fluid recharge into the reservoir and its direction of flow are interpreted from isotherm contour maps of the field prepared from Na/K and Na-K-Ca geothermometry and from concentration contour maps of some of the main chemical constituents. Well M-43 is discussed as an example of a well affected by well completion problems in its production casing. Its behavior is explained on the basis of the chemical characteristics of the produced water. The chemical changes that have taken place in some of the wells during production are explained by correlating the chemistry with the production mechanisms of the well (steam-water production rates).

  6. Current Advances in the Metabolomics Study on Lotus Seeds.

    Science.gov (United States)

    Zhu, Mingzhi; Liu, Ting; Guo, Mingquan

    2016-01-01

    Lotus (Nelumbo nucifera), which is distributed widely throughout Asia, Australia and North America, is an aquatic perennial that has been cultivated for over 2,000 years. It is very stimulating that almost all parts of lotus have been consumed as vegetable as well as food, especially the seeds. Except for the nutritive values of lotus, there has been increasing interest in its potential as functional food due to its rich secondary metabolites, such as flavonoids and alkaloids. Not only have these metabolites greatly contributed to the biological process of lotus seeds, but also have been reported to possess multiple health-promoting effects, including antioxidant, anti-amnesic, anti-inflammatory, and anti-tumor activities. Thus, comprehensive metabolomic profiling of these metabolites is of key importance to help understand their biological activities, and other chemical biology features. In this context, this review will provide an update on the current technological platforms, and workflow associated with metabolomic studies on lotus seeds, as well as insights into the application of metabolomics for the improvement of food safety and quality, assisting breeding, and promotion of the study of metabolism and pharmacokinetics of lotus seeds; meanwhile it will also help explore new perspectives and outline future challenges in this fast-growing research subject.

  7. Quantitative assessment of sensory functions after 3 surgical approaches for trigeminal neuralgia by current perception threshold measurement

    Institute of Scientific and Technical Information of China (English)

    Chen Ruoping; Ouyang Huoniu; Wang Bingyu; Ding Meixiu; Charles J. Hodge Jr.

    2008-01-01

    Objective: To quantitatively identify and grade trigeminal sensory functions after 3 major surgical procedures of trigeminal neuralgia using a newly developed quantitative sensory testing technique, current perception threshold measurement (CPTM). Methods: In the current study, there were 48 trigeminal neuralgia patients without history of prior surgical treatment. These patients received one of the following 3 surgical procedures, microvascular decompression (MVD), peripheral nerve block with alcohol (PNB), or percutaneous radiofrequency thermocoagulation (PRFT). The quantitative sensory testing measurement, CPTM, and conventional qualitative sensory testing measurements were performed preoperatively and postoperatively to evaluate and grade the trigeminal sensory functions.All 3 major cutaneous sensory fiber types, large myelinated fibers (A beta), small myelinated fibers (A delta) and unmyelinated fibers(C) were allowed to quantitatively evaluate and grade by CPTM. The results of the measurements were statistically analyzed using a one-way analysis of variance (single factor). Each subject was his/her own control for comparison of the preoperative to postoperative state on the asymptomatic and symptomatic sides. Subjects were tested 48 h preoperatively and 4 weeks postoperatively. Results: PNB with alcohol and PRFT caused significant sensory dysfunction postoperatively in every fiber type, indicating damage to all fibers. On the contrary, the sensory function in all 3 fiber types was unchanged after MVD management. Conclusion: Among the 3 major surgical procedures tested,only MVD preserves sensory function in trigeminal system. CPTM is of quantitative nature on the evaluation of sensory functions of nerve fibers

  8. Study of magnetic fields and current in the Z pinch at stagnation

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, V. V.; Anderson, A. A.; Astanovitskiy, A. L.; Nalajala, V.; Dmitriev, O. [Department of Physics, University of Nevada, Reno, Nevada 89557 (United States); Papp, D. [Department of Physics, University of Nevada, Reno, Nevada 89557 (United States); ELI-ALPS, ELI-Hu Nkft., H-6720 Szeged (Hungary)

    2015-09-15

    The structure of magnetic fields in wire-array Z pinches at stagnation was studied using a Faraday rotation diagnostic at the wavelength of 266 nm. The electron plasma density and the Faraday rotation angle in plasma were calculated from images of the three-channel polarimeter. The magnetic field was reconstructed with Abel transform, and the current was estimated using a simple model. Several shots with wire-array Z pinches at 0.5–1.5 MA were analyzed. The strength of the magnetic field measured in plasma of the stagnated pinch was in the range of 1–2 MG. The magnetic field and current profile in plasma near the neck on the pinch were reconstructed, and the size of the current-carrying plasma was estimated. It was found that current flowed in the large-size trailing plasma near the dense neck. Measurements of the magnetic field near the bulge on the pinch also showed current in trailing plasma. A distribution of current in the large-size trailing plasma can prevent the formation of multi-MG fields in the Z pinch.

  9. Experimental study of the velocity of density currents in convergent and divergent channels

    Institute of Scientific and Technical Information of China (English)

    Hasan Torabi POUDEH; Samad EMAMGHOLIZADEH; Manoocher Fathi-MOGHADAM

    2014-01-01

    The head velocity of the density current in the convergent and divergent channel is a key parameter for evaluating the extent to which suspended material travels, and for determining the type and distribution of sediment in the water body. This study experimentally evaluated the effects of the reach degree of convergence and divergence on the head velocity of the density current. Experiments were conducted in the flume with 6.0 m long, 0.72 m width and 0.6 m height. The head velocity was measured at three convergent degrees (-8o;-12o;-26o), at three divergent degrees (8o; 12o; 26o) and two slopes (0.009, 0.016) for various discharges. The measured head velocity of the density current is compared with the head velocity of the density current in the constant cross section channel. Based on non-dimensional and statistical analysis, relations as linear multiple regression are offered for predicting head velocity of the density current in the convergent, divergent and constant cross section channel. Also the results of this research show that for the same slope and discharge, the head velocity of the density current in the convergent and divergent channel are greater and less than the head velocity of the constant cross section, respectively.

  10. Statistical study of color-measurement instrumentation.

    Science.gov (United States)

    Marcus, R T; Billmeyer, F W

    1974-06-01

    In a statistical study of the variability of instrumental color-measurement data, two instruments (a Kollmorgen KCS-40 colorimeter-abridged spectrophotometer and a General Electric Recording Spectrophotometer equipped with a Davidson and Hemmendinger digital tristimulus integrator) provided three modes of measurement. Ten samples were measured 48 times in each mode. Frequency distributions were constructed for several colorimetric quantities, including tristimulus values, chromaticity coordinates, and color differences from the mean. To allow study of the error involved in the measurement of color-difference pairs, three such pairs were included in the ten samples. The beneficial effects of averaging were quantified.

  11. Particle Image Velocimetry Study of Density Current Fronts

    Science.gov (United States)

    Martin, Juan Ezequiel

    2009-01-01

    Gravity currents are flows that occur when a horizontal density difference causes fluid to move under the action of gravity; density currents are a particular case, for which the scalar causing the density difference is conserved. Flows with a strong effect of the horizontal density difference, even if only partially driven by it--such as the…

  12. Eddy current NDT: a suitable tool to measure oxide layer thickness in PWR fuel rods

    Energy Technology Data Exchange (ETDEWEB)

    Alencar, Donizete A.; Silva Junior, Silverio F. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil)], e-mail: daa@cdtn.br, e-mail: silvasf@cdtn.br; Vieira, Andre L.P.S. [Industrias Nucleares do Brasil (INB S.A.), Resende, RJ (Brazil). Fabrica de Combustivel Nuclear], e-mail: andre@inb.gov.br; Soares, Adolpho [Technotest Consultoria e Acessoria Ltda., Belo Horizonte, MG (Brazil)], e-mail: adolpho@technotest.com.br

    2009-07-01

    Eddy current is a nondestructive test (NDT) widely used in industry to support integrity analysis of components and equipment. In the nuclear area it is frequently applied to inspect tubes installed in tube exchangers, such as steam generators and condensers in PWR plants, as well as turbine blades. Adequately assisted by means of robotic devices, that inspection method has been pointed as a suitable tool to perform accurate oxide layer thickness measurements in PWR fuel rods. This paper shows some theoretical aspects and physical operating principles of the inspection method, as well as test probes construction details, and the calibration reference standards fabrication processes. Furthermore, some data, experimentally obtained at INB laboratories and other technical information obtained from TECNATOM S.A. are presented, showing the accuracy and efficacy of such NDT method. (author)

  13. Tijeras Arroyo Groundwater Current Conceptual Model and Corrective Measures Evaluation Report - December 2016.

    Energy Technology Data Exchange (ETDEWEB)

    Copland, John R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    This Tijeras Arroyo Groundwater Current Conceptual Model and Corrective Measures Evaluation Report (CCM/CME Report) has been prepared by the U.S. Department of Energy (DOE) and Sandia Corporation (Sandia) to meet requirements under the Sandia National Laboratories-New Mexico (SNL/NM) Compliance Order on Consent (the Consent Order). The Consent Order, entered into by the New Mexico Environment Department (NMED), DOE, and Sandia, became effective on April 29, 2004. The Consent Order identified the Tijeras Arroyo Groundwater (TAG) Area of Concern (AOC) as an area of groundwater contamination requiring further characterization and corrective action. This report presents an updated Conceptual Site Model (CSM) of the TAG AOC that describes the contaminant release sites, the geological and hydrogeological setting, and the distribution and migration of contaminants in the subsurface. The dataset used for this report includes the analytical results from groundwater samples collected through December 2015.

  14. Parameter Estimation of Inverter and Motor Model at Standstill using Measured Currents Only

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Knudsen, Morten; Tønnes, M.

    1996-01-01

    Methods for estimation of the parameters in the electrical equivalent diagram for the induction motor, based on special designed experiments, are given. In all experriments two of the three phases are given the same potential, i.e., no net torque is generatedand the motor is at standstill. Input...... to the system is the reference values for the stator voltages given as duty cycles for the Pulse With Modulated power device. The system output is the measured stator currents. Three experiments are describedgiving respectively 1) the stator resistance and inverter parameters, 2) the stator transient inductance...... and 3) the referred rotor rotor resistance and magnetizing inductance. The method developed in the two last experiments is independent of the inverter nonlinearity. New methods for system identification concerning saturation of the magnetic flux are given and a reference value for the flux level...

  15. Measurement of Lambda polarization in muon neutrino charged current interactions in NOMAD

    CERN Document Server

    Naumov, Dmitry V.

    2000-01-01

    The Lambda polarization in muon neutrino charged current interactions has been measured in the NOMAD experiment. We observe negative polarization along the W - boson direction which is enhanced in the target fragmentation region: Px (xF 0) = -0.09 +/- 0.06(stat) +/- 0.03(sys). These results provide a test of different models describing the nucleon spin composition and the spin transfer mechanisms. A significant transverse polarization (in the direction orthogonal to the Lambda production plane) has been observed for the first time in a neutrino experiment: Py = -0.22 +/- 0.03(stat) +/- 0.01(sys). The dependence of the absolute value of Py on the Lambda transverse momentum with respect to the hadronic jet direction is in qualitative agreement with the results from unpolarized hadron-hadron experiments.

  16. Measuring microchannel electroosmotic mobility and zeta potential by the current monitoring method.

    Science.gov (United States)

    Shao, Chenren; Devoe, Don L

    2013-01-01

    Electroosmotic flow (EOF) is an electrokinetic flow control technique widely used in microfluidic systems for applications including direct electrokinetic pumping, hydrodynamic pressure generation, and counterflow for microfluidic separations. During EOF, an electric field is applied along the length of a microchannel containing an electrolyte, with mobile ions near the charged microchannel walls experiencing a Coulomb force due to electrostatic interactions with the applied electric field that leads to bulk solution movement. The goal of this laboratory is to experimentally determine the fixed channel surface charge (zeta potential) and electroosmotic mobility associated with a given microchannel substrate material and buffer solution, using a simple current monitoring method to measure the average flow velocity within the microchannel. It is a straightforward experiment designed to help students understand EOF physics while gaining hands-on experience with basic world-to-chip interfacing. It is well suited to a 90-min laboratory session for up to 12 students with minimal infrastructure requirements.

  17. Russian language as a state language: current status and measures for its strengthening and development

    Directory of Open Access Journals (Sweden)

    Verbitskaya L. A.

    2015-01-01

    Full Text Available The focus of the article is the role of the Russian language in the world system of languages, the current status of the Russian language and the language policy measures that should be taken to preserve the Russian language and for the strengthening of its positions. The law “On the state language of the Russian Federation” adopted in 2005 should be supplemented by the list of grammar books and dictionaries of various types as listed in the appendixes to the article. The main actions aimed at ensuring the effective functioning of the law “On the state language of the Russian Federation” are also enlisted in the article.

  18. Faraday-effect polarimeter-interferometer system for current density measurement on EAST.

    Science.gov (United States)

    Liu, H Q; Jie, Y X; Ding, W X; Brower, D L; Zou, Z Y; Li, W M; Wang, Z X; Qian, J P; Yang, Y; Zeng, L; Lan, T; Wei, X C; Li, G S; Hu, L Q; Wan, B N

    2014-11-01

    A multichannel far-infrared laser-based POlarimeter-INTerferometer (POINT) system utilizing the three-wave technique is under development for current density and electron density profile measurements in the EAST tokamak. Novel molybdenum retro-reflectors are mounted in the inside wall for the double-pass optical arrangement. A Digital Phase Detector with 250 kHz bandwidth, which will provide real-time Faraday rotation angle and density phase shift output, have been developed for use on the POINT system. Initial calibration indicates the electron line-integrated density resolution is less than 5 × 10(16) m(-2) (∼2°), and the Faraday rotation angle rms phase noise is <0.1°.

  19. Measuring Customer Satisfaction. A Central Texas JTPA Study.

    Science.gov (United States)

    Angel, P. Linda

    A study was conducted to determine the baseline by which to measure expected improvements in customer satisfaction for Central Texas Job Training Partnership (JTPA) programs. The survey was designed to facilitate assessment of the current level of customer satisfaction with service delivery and influences on customer satisfaction. Data were…

  20. Calibration of eddy current carburization measurements in ethylene production tubes using ion beam analysis

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, K J [Materials Performance Technologies, Industrial Research Ltd, PO Box 31-310, Lower Hutt (New Zealand); Trompetter, W J [Rafter Laboratory, Institute of Geological and Nuclear Sciences, PO Box 31-312, Lower Hutt (New Zealand)

    2004-02-07

    Nuclear reaction analysis using a {sup 12}C(d, p{sub 0}){sup 13}C reaction and a {sup 16}O(d, p{sub 1}){sup 17}O reaction, with 1.02 MeV deuterons in an accelerator microprobe, has been used to produce quantitative linescans of the carbon and oxygen levels in ex-service ethylene pyrolysis tubes of HPM, HK40 and Manaurite XM alloy. Particle induced x-ray emission in the ion beam microprobe and energy dispersive analysis of x-rays in a scanning electron microscope were used for linescans of the heavier elements (Cr, Ni, Fe, Si and Ti). The composition linescans were used to calibrate the response and accuracy of an eddy current probe system for measuring carburization near the inner surface of the tubes. The influence of the ferromagnetic outer oxide surface layers has been clarified. A two-dimensional ANSYS finite element model (FEM) was used for interpretation of the eddy current scans. Good correlation was obtained between the ion beam analysis results, the impedance scans and the FEM.

  1. Calibration of eddy current carburization measurements in ethylene production tubes using ion beam analysis

    Science.gov (United States)

    Stevens, K. J.; Trompetter, W. J.

    2004-02-01

    Nuclear reaction analysis using a 12C(d, p0)13C reaction and a 16O(d, p1)17O reaction, with 1.02 MeV deuterons in an accelerator microprobe, has been used to produce quantitative linescans of the carbon and oxygen levels in ex-service ethylene pyrolysis tubes of HPM, HK40 and Manaurite XM alloy. Particle induced x-ray emission in the ion beam microprobe and energy dispersive analysis of x-rays in a scanning electron microscope were used for linescans of the heavier elements (Cr, Ni, Fe, Si and Ti). The composition linescans were used to calibrate the response and accuracy of an eddy current probe system for measuring carburization near the inner surface of the tubes. The influence of the ferromagnetic outer oxide surface layers has been clarified. A two-dimensional ANSYS finite element model (FEM) was used for interpretation of the eddy current scans. Good correlation was obtained between the ion beam analysis results, the impedance scans and the FEM.

  2. Unpolarized neutral current e{sup {+-}}p cross section measurements at the H1 experiment, HERA

    Energy Technology Data Exchange (ETDEWEB)

    Habib, Shiraz Z.

    2009-11-15

    Measurements of the unpolarized inclusive neutral current reduced cross section in e{sup {+-}}p scattering at a center of mass energy {radical}(s) {approx_equal} 319 GeV are presented. The data was collected by the H1 detector during the HERA II running phase, after the 2000 luminosity upgrade, and corresponds to an integrated luminosity of 145 pb{sup -1} and 167 pb{sup -1} for the e{sup -}p and e{sup +}p periods respectively. The cross section measurements were made for the negative four-momentum transfer squared range 65{<=} Q{sup 2}{<=}30000 GeV{sup 2} and Bjorken-x range 0.00085{<=}x{<=}0.65. Dedicated measurements at inelasticity y=0.75 and Q{sup 2}{<=}800 GeV{sup 2} are also made. The details of the analysis are presented here. The cross section measurements presented here are found to agree with previously published data as well as predictions determined from various NLO QCD fits. Scaling violation of the F{sub 2} structure function as well differences between the e{sup -} and e{sup +} cross sections at high Q{sup 2} due to the xF{sub 3} structure function have been observed. The cross sections in the range Q{sup 2}{<=}800 GeV{sup 2} at inelasticity y=0.75 suggest non-zero values of the longitudinal structure function F{sub L}. (orig.)

  3. Measurement of Muon Neutrino Charged Current Single $\\pi^0$ Production on Hydrocarbon using MINERvA

    Energy Technology Data Exchange (ETDEWEB)

    Altinok, Ozgur [Tufts Univ., Medford, MA (United States)

    2017-01-01

    A sample of charged-current single pion production events for the semi- exclusive channel νµ + CH → µ-π0 + nucleon(s) has been obtained using neutrino exposures of the MINERvA detector. Differential cross sections for muon momentum, muon production angle, pion momentum, pion production angle, and four-momentum transfer square Q2 are reported and are compared to a GENIE-based simulation. The cross section versus neutrino energy is also re- ported. The effects of pion final-state interactions on these cross sections are investigated. The effect of baryon resonance suppression at low Q2 is examined and an event re-weight used by two previous experiments is shown to improve the data versus simulation agreement. The differential cross sections for Q2 for Eν < 4.0 GeV and Eν ≥ 4.0 GeV are examined and the shapes of these distributions are compared to those from the experiment’s $\\bar{v}$µ-CC (π0) measurement. The polarization of the pπ0 system is measured and compared to the simulation predictions. The hadronic invariant mass W distribution is examined for evidence of resonance content, and a search is reported for evidence of a two-particle two-hole (2p2h) contribution. All of the differential cross-section measurements of this Thesis are compared with published MINERvA measurements for νµ-CC (π+) and \\bar{v}$µ-CC (π0) processes.

  4. Multidimensional Adaptive Testing in Educational and Psychological Measurement: Current State and Future Challenges

    Science.gov (United States)

    Frey, Andreas; Seitz, Nicki-Nils

    2009-01-01

    The paper gives an overview of multidimensional adaptive testing (MAT) and evaluates its applicability in educational and psychological testing. The approach of Segall (1996) is described as a general framework for MAT. The main advantage of MAT is its capability to increase measurement efficiency. In simulation studies conceptualizing situations…

  5. Ten years of marine current measurements in Espartel Sill, Strait of Gibraltar

    Science.gov (United States)

    Sammartino, S.; García Lafuente, J.; Naranjo, C.; Sánchez Garrido, J. C.; Sánchez Leal, R.; Sánchez Román, A.

    2015-09-01

    More than 10 year of Acoustic Doppler Current Profiler observations collected at the westernmost sill (Espartel sill) of the Strait of Gibraltar by a monitoring station have been carefully processed to provide the most updated estimation of the Mediterranean outflow. A comprehensive quality control of the factors affecting the uncertainty of the measurements has been carried out and great care has been paid to infer the current at the bottom layer, where direct observations are lacking. The mean outflow in the southern channel of the sill section has been estimated as -0.82 Sv (1 Sv = 1 × 106 m3 s-1), with an average contribution of the eddy fluxes of -0.04 Sv. This figure is an overestimation, as the mooring measurements, assumed valid for the whole section, ignore the lateral friction. On the other hand, it only gives the flow through the southern channel and disregards the fraction flowing through shallower northern part. Both drawbacks have been addressed by investigating the cross-strait structure of the outflow from hindcasts produced by the MITgcm numerical model, run in a high-resolution domain covering the Gulf of Cádiz and Alboran Sea basins. An overall rectifying factor of 1.039 was found satisfactory to correct the first estimate, so that the final mean outflow computed from this data set is -0.85 Sv, complemented with an uncertainty of ±0.03 Sv based on the interannual variability of the series. The temporal analysis of the series shows an outflow seasonality of around the 8% of the mean value, with maximum outflow in early spring.

  6. Study on electrical current variations in electromembrane extraction process: Relation between extraction recovery and magnitude of electrical current.

    Science.gov (United States)

    Rahmani, Turaj; Rahimi, Atyeh; Nojavan, Saeed

    2016-01-15

    This contribution presents an experimental approach to improve analytical performance of electromembrane extraction (EME) procedure, which is based on the scrutiny of current pattern under different extraction conditions such as using different organic solvents as supported liquid membrane, electrical potentials, pH values of donor and acceptor phases, variable extraction times, temperatures, stirring rates, different hollow fiber lengths and the addition of salts or organic solvents to the sample matrix. In this study, four basic drugs with different polarities were extracted under different conditions with the corresponding electrical current patterns compared against extraction recoveries. The extraction process was demonstrated in terms of EME-HPLC analyses of selected basic drugs. Comparing the obtained extraction recoveries with the electrical current patterns, most cases exhibited minimum recovery and repeatability at the highest investigated magnitude of electrical current. . It was further found that identical current patterns are associated with repeated extraction efficiencies. In other words, the pattern should be repeated for a successful extraction. The results showed completely different electrical currents under different extraction conditions, so that all variable parameters have contributions into the electrical current pattern. Finally, the current patterns of extractions from wastewater, plasma and urine samples were demonstrated. The results indicated an increase in the electrical current when extracting from complex matrices; this was seen to decrease the extraction efficiency.

  7. Establishment of a semi-biological phantom model for the study of the effect of dose reducing measures on radiation-induced DNA double strand breaks in CT using the example of risk organ based tube current modulation; Etablierung eines semibiologischen Phantommodells zur Untersuchung des Effekts dosisreduzierender Massnahmen auf strahleninduzierte DNA-Doppelstrangbrueche in der CT am Beispiel der risikoorganbasierten Roehrenstrommodulation

    Energy Technology Data Exchange (ETDEWEB)

    Sommer, Matthias

    2013-12-12

    The number of computed tomography (CT) examinations has been rising during the last decades. Therefore techniques for dose reduction receive increasing attention. Risk organ-based tube current modulation (RCM) in CT is a new approach and works by lowering the tube current, while the tube is in front of the patient's body. Therefore it should lead to a dose reduction for radiosensitive organs like the female breast, the eye lenses and the thyroid gland. Biological radiation effects cannot be estimated by physical-based dose measurements. γ-H2AX is a sensitive marker for the determination of x-ray induced DNA double-strand breaks (DSB). Hence the aim of this study was to establish a biological phantom model based on the γ-H2AX immunofluorescence microscopy method and to investigate the effect of RCM on radiation induced DNA damages. The γ-H2AX method is based on the phosphorylation of the histone variant H2AX. The phosphorylated histone γ-H2AX can be visualised using antibodies and is specific for radiation induced DSB. Blood lymphocytes from healthy volunteers, skin fibroblasts (LN) and mammary epithelial cells (HMEpC-p) were placed in different positions of an Alderson-phantom and exposed to x-rays using a 128-slice dual-source CT scanner. Standard head, neck and chest-CT scan protocols either with or without risk-organ based tube current modulation were used. RCM reduces the tube current to 20 percent at an angle of 130 degree anterior to the body, whereas tube current is increased at an angle of 230 degree posterior to the body. Afterwards cells were isolated, fixed on slides und stained with specific primary γ-H2AX antibodies and fluorescent secondary antibodies. Tiny green dots (named foci) can be detected and quantified with a fluorescence microscope and represent distinct DSB. Non-irradiated samples served as controls and CT-induced DSB were calculated by subtraction of pre- from post-exposure values. In this study a semibiological phantom model

  8. CRITICAL CURRENT AND JUNCTION BETWEEN PANCAKE STUDIES FOR HTS COIL DESIGN

    CERN Document Server

    Lécrevisse, Y; Louchart, O; Rey, J-M; Tixador, P

    2011-01-01

    YBCO Coated Conductor (CC) are very attractive for very high magnetic field coil with lower cryogenics need. We study two major aspects of HTS coil building. First the results of critical current measurements on YBCO tape provided by SuperPower are presented for a large temperature range and in parallel magnetic field configuration. A model is also proposed to extrapolate those measurements at other temperatures and fields. Then we focus on the critical aspect of junctions between pancakes. Junctions in cylindrical configuration are studied using three different soldering materials. The results are promising for further coil building.

  9. MODEL STUDY OF THE DOUBLE FED MACHINE WITH CURRENT CONTROL

    Directory of Open Access Journals (Sweden)

    A. S. Lyapin

    2016-07-01

    Full Text Available The paper deals with modeling results of the double fed induction machine with current control in the rotor circuit. We show the most promising applications of electric drives on the basis of the double fed induction machine and their advantages. We present and consider functional scheme of the electric drive on the basis of the double fed induction machine with current control. Equations are obtained for creation of such machine mathematical model. Expressions for vector projections of rotor current are given. According to the obtained results, the change of the vector projections of rotor current ensures operation of the double fed induction machine with the specified values of active and reactive stator power throughout the variation range of sliding motion. We consider static characteristics of double fed machine with current control. Energy processes proceeding in the machine are analyzed. We confirm the operationpossibility of double fed induction machine with current controlin the rotor circuit with given values of active and reactive stator power. The presented results can be used for creation of mathematical models and static characteristics of double fed machines with current control of various capacities.

  10. Measurement of multiplicity and momentum spectra in the current fragmentation region of the Breit frame at HERA

    CERN Document Server

    Derrick, Malcolm; Magill, S; Mikunas, D; Musgrave, B; Repond, J; Stanek, R; Talaga, R L; Zhang, H; Ayad, R; Bari, G; Basile, M; Bellagamba, L; Boscherini, D; Bruni, A; Bruni, G; Bruni, P; Cara Romeo, G; Castellini, G; Chiarini, M; Cifarelli, Luisa; Cindolo, F; Contin, A; Gialas, I; Giusti, P; Iacobucci, G; Laurenti, G; Levi, G; Margotti, A; Massam, Thomas; Nania, R; Nemoz, C; Palmonari, F; Polini, A; Sartorelli, G; Timellini, R; Zamora-Garcia, Yu E; Zichichi, Antonino; Bargende, A; Crittenden, James Arthur; Desch, Klaus; Diekmann, B; Doeker, T; Eckert, M; Feld, L; Frey, A; Geerts, M; Geitz, G; Grothe, M; Haas, T; Hartmann, H; Haun, D; Heinloth, K; Hilger, E; Jakob, H P; Katz, U F; Mari, S M; Mass, A; Mengel, S; Mollen, J; Paul, E; Rembser, C; Schattevoy, R; Schramm, D; Stamm, J; Wedemeyer, R; Campbell-Robson, S; Cassidy, A; Dyce, N; Foster, B; George, S; Gilmore, R; Heath, G P; Heath, H F; Llewellyn, T J; Morgado, C J S; Norman, D J P; O'Mara, J A; Tapper, R J; Wilson, S S; Yoshida, R; Rau, R R; Arneodo, M; Iannotti, L; Schioppa, M; Susinno, G; Bernstein, A M; Caldwell, A; Parsons, J A; Ritz, S; Sciulli, F; Straub, P B; Wai, L; Yang, S; Zhu, Q; Borzemski, P; Chwastowski, J; Eskreys, Andrzej; Piotrzkowski, K; Zachara, M; Zawiejski, L; Adamczyk, L; Bednarek, B; Jelen, K; Kisielewska, D; Kowalski, T; Rulikowska-Zarebska, E; Suszycki, L; Zajac, J; Kotanski, Andrzej; Przybycien, M B; Bauerdick, L A T; Behrens, U; Beier, H; Bienlein, J K; Coldewey, C; Deppe, O; Desler, K; Drews, G; Flasinski, M; Gilkinson, D J; Glasman, C; Göttlicher, P; Grosse-Knetter, J; Gutjahr, B; Hain, W; Hasell, D; Hessling, H; Hultschig, H; Iga, Y; Joos, P; Kasemann, M; Klanner, Robert; Koch, W; Köpke, L; Kötz, U; Kowalski, H; Labs, J; Ladage, A; Löhr, B; Loewe, M; Lüke, D; Manczak, O; Ng, J S T; Nickel, S; Notz, D; Ohrenberg, K; Roco, M T; Rohde, M; Roldán, J; Schneekloth, U; Schulz, W; Selonke, F; Stiliaris, E; Surrow, B; Voss, T; Westphal, D; Wolf, G; Youngman, C; Zhou, J F; Grabosch, H J; Kharchilava, A I; Leich, A; Mattingly, M C K; Meyer, A; Schlenstedt, S; Barbagli, G; Pelfer, P G; Anzivino, Giuseppina; Maccarrone, G D; De Pasquale, S; Votano, L; Bamberger, Andreas; Eisenhardt, S; Freidhof, A; Söldner-Rembold, S; Schröder, J; Trefzger, T M; Brook, N H; Bussey, Peter J; Doyle, A T; Fleck, I; Jamieson, V A; Saxon, D H; Utley, M L; Wilson, A S; Dannemann, A; Holm, U; Horstmann, D; Neumann, T; Sinkus, R; Wick, K; Badura, E; Burow, B D; Hagge, L; Lohrmann, E; Mainusch, J; Milewski, J; Nakahata, M; Pavel, N; Poelz, G; Schott, W; Zetsche, F; Bacon, Trevor C; Butterworth, Ian; Gallo, E; Harris, V L; Hung, B Y H; Long, K R; Miller, D B; Morawitz, P P O; Prinias, A; Sedgbeer, J K; Whitfield, A F; Mallik, U; McCliment, E; Wang, M Z; Wang, S M; Wu, J T; Zhang, Y; Cloth, P; Filges, D; An Shiz Hong; Hong, S M; Nam, S W; Park, S K; Suh, M H; Yon, S H; Imlay, R; Kartik, S; Kim, H J; McNeil, R R; Metcalf, W; Nadendla, V K; Barreiro, F; Cases, G; Graciani, R; Hernández, J M; Hervás, L; Labarga, L; Del Peso, J; Puga, J; Terrón, J; De Trocóniz, J F; Smith, G R; Corriveau, F; Hanna, D S; Hartmann, J; Hung, L W; Lim, J N; Matthews, C G; Patel, P M; Sinclair, L E; Stairs, D G; Saint-Laurent, M G; Ullmann, R T; Zacek, G; Bashkirov, V; Dolgoshein, B A; Stifutkin, A; Bashindzhagian, G L; Ermolov, P F; Gladilin, L K; Golubkov, Yu A; Kobrin, V D; Kuzmin, V A; Proskuryakov, A S; Savin, A A; Shcheglova, L M; Solomin, A N; Zotov, N P; Botje, M; Chlebana, F S; Dake, A P; Engelen, J; De Kamps, M; Kooijman, P M; Kruse, A; Tiecke, H G; Verkerke, W; Vreeswijk, M; Wiggers, L; De Wolf, E; Van Woudenberg, R; Acosta, D; Bylsma, B G; Durkin, L S; Honscheid, K; Li Chuan; Ling, T Y; McLean, K W; Murray, W N; Park, I H; Romanowsky, T A; Seidlein, R; Bailey, D S; Blair, G A; Byrne, A; Cashmore, Roger J; Cooper-Sarkar, A M; Daniels, D C; Devenish, R C E; Harnew, N; Lancaster, M; Luffman, P; Lindemann, L; McFall, J D; Nath, C; Quadt, A; Uijterwaal, H; Walczak, R; Wilson, F F; Yip, T; Abbiendi, G; Bertolin, A; Brugnera, R; Carlin, R; Dal Corso, F; De Giorgi, M; Dosselli, U; Limentani, S; Morandin, M; Posocco, M; Stanco, L; Stroili, R; Voci, C; Bulmahn, J; Butterworth, J M; Feild, R G; Oh, B Y; Whitmore, J; D'Agostini, Giulio; Marini, G; Nigro, A; Tassi, E; Hart, J C; McCubbin, N A; Prytz, K; Shah, T P; Short, T L; Barberis, E; Cartiglia, N; Dubbs, T; Heusch, C A; Van Hook, M; Hubbard, B; Lockman, W; Rahn, J T; Sadrozinski, H F W; Seiden, A; Biltzinger, J; Seifert, R J; Walenta, Albert H; Zech, G; Abramowicz, H; Briskin, G M; Dagan, S; Levy, A; Hasegawa, T; Hazumi, M; Ishii, T; Kuze, M; Mine, S; Nagasawa, Y; Nakao, M; Susuki, I; Tokushuku, K; Yamada, S; Yamazaki, Y; Chiba, M; Hamatsu, R; Hirose, T; Homma, K; Kitamura, S; Nakamitsu, Y; Yamauchi, K; Cirio, R; Costa, M; Ferrero, M I; Lamberti, L; Maselli, S; Peroni, C; Sacchi, R; Solano, A; Staiano, A; Dardo, M; Bailey, D C; Bandyopadhyay, D; Bénard, F; Brkic, M; Crombie, M B; Gingrich, D M; Hartner, G F; Joo, K K; Levman, G M; Martin, J F; Orr, R S; Sampson, C R; Teuscher, R; Catterall, C D; Jones, T W; Kaziewicz, P B; Lane, J B; Saunders, R L; Shulman, J; Blankenship, K; Kochocki, J A; Lu, B; Mo, L W; Bogusz, W; Charchula, K; Ciborowski, J; Gajewski, J; Grzelak, G; Kasprzak, M; Krzyzanowski, M; Muchorowski, K; Nowak, R J; Pawlak, J M; Tymieniecka, T; Wróblewski, A K; Zakrzewski, J A; Zarnecki, A F; Adamus, M; Eisenberg, Y; Karshon, U; Revel, D; Zer-Zion, D; Shapira, A; Ali, I; Badgett, W F; Behrens, B H; Dasu, S; Fordham, C; Foudas, C; Goussiou, A; Loveless, R J; Reeder, D D; Silverstein, S; Smith, W H; Vaiciulis, A W; Wodarczyk, M; Tsurugai, T; Bhadra, S; Cardy, M L; Fagerstroem, C P; Frisken, W R; Furutani, K M; Khakzad, M; Schmidke, W B; Levy, Aharon

    1995-01-01

    Charged particle production has been measured in Deep Inelastic Scattering (DIS) events using the ZEUS detector over a large range of Q^2 from 10 to 1280 {\\rm\\ GeV}^2. The evolution with Q of the charged multiplicity and scaled momentum has been investigated in the current fragmentation region of the Breit frame. The data are used to study QCD \\linebreak coherence effects in DIS and are compared with corresponding \\ee~data in order to test the universality of quark fragmentation.

  11. A STUDY ON QUALITY ANALYSIS MEASURING PROCESS

    Directory of Open Access Journals (Sweden)

    Liliana LUCA

    2016-12-01

    Full Text Available The paper presents the results of a study concerning the use of the Ishikawa diagram in analyzing the causes that determine errors in the measuring the sizes of the pieces of machine construction field. The studied problem was "errors in the measurement process” and this constitutes the head of the Ishikawa diagram skeleton.All the possible, main and secondary causes that could generate the studied problem were identified. The paper shows the potential causes of the studied problem, which were firstly grouped in fives categories, as follows: man/people methods, machines/ measuring devices, material/ piece of measured, environment. Performing the Ishikawa diagram in a more detailed form in order to determine the potential causes of a found defect has the advantage that it offers the possibility to identify and analyze all factors, which relate to the problem studied. The paper presented a formula for the Ishikawa diagram was determined, 4M+E.

  12. Current Profile Measurements from Moderate to Strong Lower Hybrid Single-Pass Damping on Alcator C-Mod

    Science.gov (United States)

    Mumgaard, R. T.; Wallace, G. M.; Scott, S. D.; Shiraiwa, S.; Faust, I.; Parker, R. R.

    2015-11-01

    Lower Hybrid Current Drive (LHCD) is an effective tool to non-inductively drive up to 100% of the plasma current on Alcator C-Mod. Measurements with an upgraded MSE diagnostic show that the fast-electron current profile is broader than the Ohmic current profile but still located the plasma core in agreement with strongly centrally peaked fast electron bremsstrahlung (FEB) measurements. Scans in a regime of high current drive efficiency across a range of density, LHCD power, launched n||, and plasma current show the driven current profile, FEB profile shapes, and current drive efficiency are sensitive only to total plasma current. Simulations using ray-tracing Fokker Planck codes show that the rays make 1-3 bounces through the plasma edge to bridge the spectral gap. Although in agreement with the total current, the simulations qualitatively disagree with experiment regarding current and FEB profiles as well as sensitivity to power and density. Simulations at higher plasma temperature and current predict stronger single-pass damping and preliminary experiments show increased current drive efficiency. Experiments to determine if the profile discrepancies persist when the ray bounces play a reduced role are planned, including companion experiments in D and He resulting in different edge plasma conditions. This work was performed on the Alcator C-Mod tokamak, a DoE Office of Science user facility, and is supported by USDoE awards DE-FC02-99ER54512 and DE-AC02-09CH11466.

  13. Cost-of-illness studies : a review of current methods.

    Science.gov (United States)

    Akobundu, Ebere; Ju, Jing; Blatt, Lisa; Mullins, C Daniel

    2006-01-01

    The number of cost-of-illness (COI) studies has expanded considerably over time. One outcome of this growth is that the reported COI estimates are inconsistent across studies, thereby raising concerns over the validity of the estimates and methods. Several factors have been identified in the literature as reasons for the observed variation in COI estimates. To date, the variation in the methods used to calculate costs has not been examined in great detail even though the variations in methods are a major driver of variation in COI estimates. The objective of this review was to document the variation in the methodologies employed in COI studies and to highlight the benefits and limitations of these methods. The review of COI studies was implemented following a four-step procedure: (i) a structured literature search of MEDLINE, JSTOR and EconLit; (ii) a review of abstracts using pre-defined inclusion and exclusion criteria; (iii) a full-text review using pre-defined inclusion and exclusion criteria; and (iv) classification of articles according to the methods used to calculate costs. This review identified four COI estimation methods (Sum_All Medical, Sum_Diagnosis Specific, Matched Control and Regression) that were used in categorising articles. Also, six components of direct medical costs and five components of indirect/non-medical costs were identified and used in categorising articles.365 full-length articles were reflected in the current review following the structured literature search. The top five cost components were emergency room/inpatient hospital costs, outpatient physician costs, drug costs, productivity losses and laboratory costs. The dominant method, Sum_Diagnosis Specific, was a total costing approach that restricted the summation of medical expenditures to those related to a diagnosis of the disease of interest. There was considerable variation in the methods used within disease subcategories. In several disease subcategories (e.g. asthma, dementia

  14. Measurement of neutral current coherent neutral pion production on carbon in a few-GeV neutrino beam

    CERN Document Server

    Kurimoto, Y; Brice, S J; Bugel, L; Catala-Perez, J; Cheng, G; Conrad, J M; Djurcic, Z; Dore, U; Finley, D A; Franke, A J; Giganti, C; Gomez-Cadenas, J J; Guzowski, P; Hanson, A; Hayato, Y; Hiraide, K; Jover-Manas, G; Karagiorgi, G; Katori, T; Kobayashi, Y K; Kobilarcik, T; Kubo, H; Louis, W C; Loverre, P F; Ludovici, L; Mahn, K B M; Mariani, C; Masuike, S; Matsuoka, K; McGary, V T; Metcalf, W; Mills, G B; Mitsuka, G; Miyachi, Y; Mizugashira, S; Moore, C D; Nakajima, Y; Nakaya, T; Napora, R; Nienaber, P; Orme, D; Otani, M; Russell, A D; Sanchez, F; Shaevitz, M H; Shibata, T -A; Sorel, M; Stefanski, R J; Takei, H; Tanaka, H -K; Tanaka, M; Tayloe, R; Taylor, I J; Tesarek, R J; Uchida, Y; Van de Water, R; Walding, J J; Wascko, M O; White, H B; Wilking, M J; Yokoyama, M; Zeller, G P; Zimmerman, E D

    2010-01-01

    The SciBooNE Collaboration reports a measurement of neutral current coherent neutral pion production on carbon by a muon neutrino beam with average energy 0.8 GeV. The separation of coherent from inclusive neutral pion production has been improved by detecting recoil protons from resonant neutral pion production. We measure the ratio of the neutral current coherent neutral pion production to total charged current cross sections to be (1.16 +/- 0.24) x 10-2. The ratio of charged current coherent pion to neutral current coherent pion production is calculated to be 0.14+0.30 -0.28, using our published charged current coherent pion measurement.

  15. Determining the mobility of ions by transient current measurements at high voltages.

    Science.gov (United States)

    Kohn, Peter; Schröter, Klaus; Thurn-Albrecht, Thomas

    2007-08-24

    We present polarization and transient current experiments that allow an independent determination of the charge carrier density and the mobility of ions in polymer electrolytes at low charge carrier density. The method relies on a complete depletion of ions in the bulk electrolyte achieved by applying high voltages. Based on a qualitative model for the charge dynamics in this nonlinear regime, the method is exemplarily applied to a system of polymethylmethacrylate doped with small amounts of a lithium salt. The independently obtained values for the ionic mobility, the charge carrier density, and the conductivity are consistent for all salt concentrations studied. Criteria for the applicability of the method are discussed.

  16. DC current and AC impedance measurements on boron-doped single crystalline diamond films

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Haitao; Gaudin, O.; Jackman, R.B. [Department of Electronic and Electrical Engineering, University College London, Torrington Place, London WC1E 7JE (United Kingdom); Muret, P.; Gheeraert, E. [Laboratoire d' Etudes des Proprietes Electroniques des Solides, BP166, 38042 Grenoble Cedex 9 (France)

    2003-09-01

    In this paper, we report the first measurement of impedance on boron-doped single crystalline diamond films from 0.1 Hz to 10 MHz with the temperature ranging from -100 C up to 300 C. The Cole-Cole (Z' via Z{sup ''}) plots are well fitted to a RC parallel circuit model and the equivalent Resistance and Capacitance for the diamond films have been estimated using the Zview curve fitting. The results show only one single semicircle response at each temperature measured. It was found that the resistance decreases from 70 G{omega} at -100 C to 5 k{omega} at 300 C. The linear curve fitting from -100 C to 150 C shows the sample has an activation energy of 0.37 eV, which is consistent with the theoretical value published of this kind of material. The equivalent capacitance is maintained at the level of pF up to 300 C suggesting that no grain boundaries are being involved, as expected from a single crystal diamond. The activation energy from the dc current-temperature curves is 0.36 eV, which is consistent with the value from ac impedance. The potential of this under-used technique for diamond film analysis will be discussed. (copyright 2003 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  17. Thermally stimulated current measurements on a UV irradiated organic photoreceptor layer

    Science.gov (United States)

    Webb, D. P.; Chan, Y. C.; Wong, C. K. H.; Lam, Y. W.; Leung, K. M.; Chrp, D. S.

    1997-05-01

    Thermally stimulated current (TSC) measurements have been performed on a xerographic photoreceptor which has been treated with ultraviolet (UV) radiation. The charge transport layer of the photoreceptor consists of a polyester molecularly doped with an arylamine substituted hydrazone which was observed to undergo UV induced rearrangement to an indazole derivative. The indazole derivative is transparent to the wavelength component inducing the photo-reaction so that the depth of converted material gradually extends farther into the CTL with UV exposure time. The xerographic residual potential variation with irradiation time is attributed to the formation of a potential barrier to transfer of charge from hydrazone hopping states to indazole hopping states. The mobility activation energy obtained from TSC measurements is 0.22 eV for unirradiated material, which decreases to 0.12 eV after 1200 s of irradiation. The latter energy is identified as a signature of the potential barrier. This identification is corroborated by the correlation between the decrease of the residual potential and the increase of the TSC activation energy after 3600 s of irradiation.

  18. Validation of a pulsed eddy current system for measuring wall thinning through insulation

    Science.gov (United States)

    Brett, Colin R.; de Raad, Jan A.

    1996-11-01

    There have been several failures in power plant feedwater piping systems due to wall thinning caused by flow- accelerated corrosion of the inner surface. Detection of wastage in susceptible pipes is costly as traditional NDE methods such as ultrasonic testing entail removal and reinstallation of insulation over many meters of pipework. Radiography is one solution to this problem, but it is slow to apply and requires careful attention to safety. The RTD Incotest system uses pulsed eddy current technology to measure pipewall thickness through insulation and external cladding. The technology has been licensed from Arco, Inc., who originally developed the technique for large diameter pipelines and storage tanks where the area interrogated was made deliberately large. This paper describes an optimized Incotest systems which can detect and measure internal or external wall wastage which is more localized and typical of flow-accelerated corrosion. Improvements have also been made to the inspection and data acquisition in order to increase the inspection rate and overall productivity. Ultimately the performance of the optimized Incotest system has been verified on samples which contain artificial and real corrosion.

  19. Measurement of fragmentation properties of charmed particle production in charged-current neutrino interactions

    CERN Document Server

    Onengüt, G; De Jong, M; Konijn, J; Melzer, O; Oldeman, R G C; Pesen, E; Van der Poel, C A F J; Visschers, J L; Güler, M; Köse, U; Serin-Zeyrek, M; Kama, S; Sever, R; Tolun,, P; Zeyrek, M T; Catanesi, M G; De Serio, M; Ieva, M; Muciaccia, M T; Radicioni, E; Simone, S; Bülte, A; Winter, Klaus; Van de Vyver, B; Vilain, P; Wilquet, G; Saitta, B; Di Capua, E; Ogawa, S; Shibuya, H; Artamonov, A V; Brunner, J; Chizhov, M; Cussans, D G; Doucet, M; Fabre, Jean-Paul; Hristova, I R; Kawamura, T; Kolev, D; Litmaath, M; Meinhard, H; Panman, J; Papadopoulos, I M; Ricciardi, S; Rozanov, A; Saltzberg, D; Tsenov, R V; Uiterwijk, J W E; Zucchelli, P; Goldberg, J; Chikawa, M; Arik, E; Song, J S; Yoon, C S; Kodama, K; Ushida, N; Aoki, S; Hara, T; Delbar, T; Favart, D; Grégoire, G; Kalinin, S; Makhlyoueva, I V; Gorbunov, P; Khovanskii, V D; Shamanov, V V; Tsukerman, I; Bruski, N; Frekers, D; Rondeshagen, D; Wolff, T; Hoshino, K; Kawada, J; Komatsu, M; Miyanishi, M; Nakamura, M; Nakano, T; Narita, K; Niu, K; Niwa, K; Nonaka, N; Sato, O; Toshito, T; Buontempo, S; Cocco, A G; D'Ambrosio, N; De Lellis, G; De Rosa, G; Di Capua, F; Ereditato, A; Fiorillo, G; Marotta, A; Messina, M; Migliozzi, P; Pistillo, C; Santorelli, R; Scotto-Lavina, L; Strolin, P; Tioukov, V; Nakamura, K; Okusawa, T; Dore, U; FLoverre, P; Ludovici, L; Maslennikov, A L; Righini, P; Rosa, G; Santacesaria, R; Satta, A; Spada, F R; Barbuto, E; Bozza, C; Grella, G; Romano, G; Sirignano, C; Sorrentino, S; Sato, Y; Tezuka, I

    2004-01-01

    During the years 1994-97, the emulsion target of the CHORUS detector was exposed to the wideband neutrino beam of the CERN SPS. In total about 100 000 charged-current neutrino interactions were located in the nuclear emulsion target and fully reconstructed. From this sample of events which was based on the data acquired by new automatic scanning systems, 1048 D0 events were selected by a pattern recognition program. They were confirmed as neutral-particle decays through visual inspection. Fragmentation properties of deep-inelastic charm production were measured using these events. Distributions of the D0 momentum, Feynman x(x_F), z and tan thetaôut, the transverse angle out of the leptonic plane defined by the muon and the neutrino, are presented. The mean value of z was measured to be (z) = 0.63 +- 0.03(stat) +- 0.01(syst). From fits to the z distribution, values for the Peterson parameter epsilon_p = 0.108 +- 0.017(stat) +- 0.013(syst) and the Collins-Spiller parameter epsilon_CS = 0.21^+0.05_-0.04(stat) +...

  20. Numerical Study of Planar GPR Antenna Measurements

    DEFF Research Database (Denmark)

    Meincke, Peter; Hansen, Thorkild

    2004-01-01

    The formulation of planar near-field measurements of GPR antennas determines the plane-wave spectra of the GPR antenna in terms of measurements obtained with a buried probe as the GPR antenna moves over a scan plane on the ground. A numerical study investigates how the formulation is affected by (1...

  1. Numerical Study of Planar GPR Antenna Measurements

    DEFF Research Database (Denmark)

    Meincke, Peter; Hansen, Thorkild

    2004-01-01

    The formulation of planar near-field measurements of GPR antennas determines the plane-wave spectra of the GPR antenna in terms of measurements obtained with a buried probe as the GPR antenna moves over a scan plane on the ground. A numerical study investigates how the formulation is affected by (1...

  2. Durability Study of SOFCs Under Cycling Current Load Conditions

    DEFF Research Database (Denmark)

    Hagen, Anke; Hendriksen, Peter Vang; Frandsen, Henrik Lund;

    2009-01-01

    In fuel cell applications, the cells must be able to withstand varying operating conditions. Anode supported solid oxide fuel cells were tested under cycling current load in order to determine the durability and possibly identify degradation mechanisms. At 750 °C and a cycling between zero and 0.......75 A cm-2, the cell voltage degradation rate was similar to tests with the corresponding high constant current density. However, by analyzing the impedance spectra it was found that anode degradation was becoming more important when going from constant to cycling conditions. Running the cycling load tests...... at 850 °C, the cells degraded similarly as under the corresponding constant current load whereas, in some cases, cells failed mechanically after a few hundred hours. These cells did not experience severe additional degradation due to the cycling of the current density until the point of failure...

  3. The nitrogen fate beyond the current nutrient mitigation measures: sustainability of an integrated agriculture

    Science.gov (United States)

    Thieu, V.; Billen, G. F.; Garnier, J.; Lancelot, C.; Gypens, N.

    2010-12-01

    Located in the North-Western Europe the terrestrial continuum that includes the Seine, Somme, and Scheldt River basins offers an interesting example of a transborder territory (France, Belgium, and Netherlands) with high-intensity anthropogenic pressures. It well-illustrates the rapid development of modern agriculture in industrialised countries and the resulting severe alteration of water resources and jeopardising the capacity of rural territories to produce drinking water. The corresponding nutrient loads delivered then into the Southern Bight of the North Sea, strongly affect the ecological functioning of the coastal zone. An integrated ‘river-ocean’ assessment, coupling two deterministic models - the SENEQUE RIVESTRAHLER model simulating nutrient dynamic in the drainage network and the MIRO model describing the ecological functioning coastal ecosystem - points out the relevance of current policy based measures (improvement of waste water treatment) to mitigate phosphorous emissions, while the nitrogen pollution related to agriculture will remain critical despite the implementation of classical management measure (good agricultural practices). Therefore and irrespectively of the current political agenda, a more radical alternative is established, consisting of a generalised shift to an integrated agriculture of all agricultural areas in the three basins, excluding the use of synthetically compounded fertilisers and the importation of livestock feed. Such scenario aims at evaluating whether agriculture, by essence, can conciliate (i) the demand for food and feed by local populations, (ii) a good ecological functioning of aquatic ecosystems and (iii) a balanced nutrient status for the adjacent coastal area. This scenario involves an increased livestock density in the Seine and Somme and a decrease in livestock in the Scheldt basin. It leads to a significant reduction of agricultural production that finally brings the three basins closer to autotrophy

  4. Thermographic Phosphors for High Temperature Measurements: Principles, Current State of the Art and Recent Applications

    Directory of Open Access Journals (Sweden)

    Konstantinos Kontis

    2008-09-01

    Full Text Available This paper reviews the state of phosphor thermometry, focusing on developments in the past 15 years. The fundamental principles and theory are presented, and the various spectral and temporal modes, including the lifetime decay, rise time and intensity ratio, are discussed. The entire phosphor measurement system, including relative advantages to conventional methods, choice of phosphors, bonding techniques, excitation sources and emission detection, is reviewed. Special attention is given to issues that may arise at high temperatures. A number of recent developments and applications are surveyed, with examples including: measurements in engines, hypersonic wind tunnel experiments, pyrolysis studies and droplet/spray/gas temperature determination. They show the technique is flexible and successful in measuring temperatures where conventional methods may prove to be unsuitable.

  5. Study of lower hybrid current drive for the demonstration reactor

    Energy Technology Data Exchange (ETDEWEB)

    Molavi-Choobini, Ali Asghar [Dept. of Physics, Faculty of Engineering, Islamic Azad University, Shahr-e-kord Branch, Shahr-e-kord (Iran, Islamic Republic of); Naghidokht, Ahmed [Dept. of Physics, Urmia University, Urmia (Iran, Islamic Republic of); Karami, Zahra [Dept. of Engineering, Islamic Azad University, Zanjan Branch, Zanjan (Iran, Islamic Republic of)

    2016-06-15

    Steady-state operation of a fusion power plant requires external current drive to minimize the power requirements, and a high fraction of bootstrap current is required. One of the external sources for current drive is lower hybrid current drive, which has been widely applied in many tokamaks. Here, using lower hybrid simulation code, we calculate electron distribution function, electron currents and phase velocity changes for two options of demonstration reactor at the launched lower hybrid wave frequency 5 GHz. Two plasma scenarios pertaining to two different demonstration reactor options, known as pulsed (Option 1) and steady-state (Option 2) models, have been analyzed. We perceive that electron currents have major peaks near the edge of plasma for both options but with higher efficiency for Option 1, although we have access to wider, more peripheral regions for Option 2. Regarding the electron distribution function, major perturbations are at positive velocities for both options for flux surface 16 and at negative velocities for both options for flux surface 64.

  6. Acoustic Doppler Current Profiler Measurements in the Tailrace at John Day Dam

    Energy Technology Data Exchange (ETDEWEB)

    Cook, Chris B.; Dibrani, Berhon; Serkowski, John A.; Richmond, Marshall C.; Titzler, P. Scott; Dennis, Gary W.

    2006-01-30

    Acoustic Doppler current profilers (ADCPs) were used to measure water velocities in the tailrace at John Day Dam over a two-week period in February 2005. Data were collected by the Pacific Northwest National Laboratory for the Hydraulic Design Section, Portland District, U.S. Army Corps of Engineers (USACE). The objective of this project was therefore to collect field measurements of water velocities in the near-field draft tube exit zone as well as the far-field tailrace to be used for improving these models. Field data were collected during the project using five separate ADCPs. Mobile ADCP data were collected using two ADCPs mounted on two separate boats. Data were collected by either holding the boat on-station at pre-defined locations for approximately 10 minutes or in moving transect mode when the boat would move over large distances during the data collection. Results from the mobile ADCP survey indicated a complex hydrodynamic flow field in the tailrace downstream of John Day Dam. A large gyre was noted between the skeleton section of the powerhouse and non-spilling portion of the spillway. Downstream of the spillway, the spillway flow is constrained against the navigation lock guide wall, and large velocities were noted in this region. Downstream of the guide wall, velocities decreased as the spillway jet dispersed. Near the tailrace island, the flow split was measured to be approximately equal on Day 2 (25.4 kcfs spillway/123 kcfs total). However, approximately 60% of the flow passed along the south shore of the island on Day 1 (15.0 kcfs spillway/150 kcfs total). At a distance of 9000 ft downstream of the dam, flows had equalized laterally and were generally uniform over the cross section. The collection of water velocities near the draft tube exit of an operating turbine unit is not routine, and equipment capable of measuring 3D water velocities in these zones are at the forefront of hydraulic measurement technology. Although the feasibility of

  7. Measurement of Neutrino Oscillation Parameters Using Anti-fiducial Charged Current Events in MINOS

    Energy Technology Data Exchange (ETDEWEB)

    Strait, Matthew Levy [Minnesota U.

    2010-09-01

    Abstract The Main Injector Neutrino Oscillation Search (MINOS) obse rves the disappearance of muon neutrinos as they propagate in the long baseline Neutri nos at the Main Injector (NuMI) beam. MINOS consists of two detectors. The near detector sam ples the initial composition of the beam. The far detector, 735 km away, looks for an energy-d ependent deficit in the neutrino spectrum. This energy-dependent deficit is interpreted as q uantum mechanical oscillations be- tween neutrino flavors. A measurement is made of the effective two-neutrino mixing parameters ∆ m 2 ≈ ∆ m 2 23 and sin 2 2 θ ≈ sin 2 2 θ 23 . The primary MINOS analysis uses charged current events in the fiducial volume of the far detector. This analysis uses the roughly equal-sized sample of events that fails the fiducial cut, consisting of interact ions outside the fiducial region of the detector and in the surrounding rock. These events provide a n independent and complementary measurement, albeit weaker due to incomplete reconstructi on of the events. This analysis reports on an exposure of 7 . 25 × 10 20 protons-on-target. Due to poor energy resolution, the meas urement of sin 2 2 θ is much weaker than established results, but the measuremen t of sin 2 2 θ > 0 . 56 at 90% confidence is consistent with the accepted value. The measur ement of ∆ m 2 is much stronger. Assuming sin 2 2 θ = 1 , ∆ m 2 = (2 . 20 ± 0 . 18[stat] ± 0 . 14[syst]) × 10 − 3 eV 2 .

  8. Measurement of Neutrino Oscillation Parameters Using Anti-fiducial Charged Current Events in MINOS

    Energy Technology Data Exchange (ETDEWEB)

    Strait, Matthew Levy [Univ. of Minnesota, Minneapolis, MN (United States)

    2010-09-01

    Abstract The Main Injector Neutrino Oscillation Search (MINOS) obse rves the disappearance of muon neutrinos as they propagate in the long baseline Neutri nos at the Main Injector (NuMI) beam. MINOS consists of two detectors. The near detector sam ples the initial composition of the beam. The far detector, 735 km away, looks for an energy-d ependent deficit in the neutrino spectrum. This energy-dependent deficit is interpreted as q uantum mechanical oscillations be- tween neutrino flavors. A measurement is made of the effective two-neutrino mixing parameters Δ m 2 ≈ Δ m 2 23 and sin 2 2 θ ≈ sin 2 2 θ 23 . The primary MINOS analysis uses charged current events in the fiducial volume of the far detector. This analysis uses the roughly equal-sized sample of events that fails the fiducial cut, consisting of interact ions outside the fiducial region of the detector and in the surrounding rock. These events provide a n independent and complementary measurement, albeit weaker due to incomplete reconstructi on of the events. This analysis reports on an exposure of 7 . 25 × 10 20 protons-on-target. Due to poor energy resolution, the meas urement of sin 2 2 θ is much weaker than established results, but the measuremen t of sin 2 2 θ > 0 . 56 at 90% confidence is consistent with the accepted value. The measur ement of Δ m 2 is much stronger. Assuming sin 2 2 θ = 1 , Δ m 2 = (2 . 20 ± 0 . 18[stat] ± 0 . 14[syst]) × 10 - -3 eV 2 .

  9. An observational study of a shallow gravity current triggered by katabatic flow

    Directory of Open Access Journals (Sweden)

    A. Adachi

    2004-11-01

    Full Text Available Observations from a wind profiler and a meteorological tower are utilized to study the evolution of a gravity current that passed over the Meteorological Research Institute's (MRI field site in Tsukuba, Japan. The gravity current was created by katabatic flow originating on the mountainous slopes west of the field site. The passage of the shallow current was marked by a pronounced pressure disturbance and was accompanied by vertical circulations seen in the tower and profiler data. Direct vertical-beam measurements are difficult, especially at low heights during high-gradient events like density currents. In this study vertical velocities from the profiler are derived from the four oblique beams by use of the Minimizing the Variance of the Differences (MVD method. The vertical velocities derived from the MVD method agree well with in situ vertical velocities measured by a sonic anemometer on the tower.

    The gravity current is analyzed with surface observations, the wind profiler/RASS and tower-mounted instruments. Observations from the profiler/RASS and the tower-mounted instruments illustrate the structure of the gravity current in both wind and temperature fields. The profiler data reveal that there were three regions of waves in the vertical velocity field: lee-type waves, a solitary wave and Kelvin-Helmholtz waves. The lee-type waves in the head region of the gravity current seem to have been generated by the gravity current acting as an obstacle to prefrontal flow. The solitary wave was formed from the elevated head of the gravity current that separated from the feeder flow. Profiler vertical-motion observations resolve this wave and enable us to classify it as a Benjamin-Davis-Ono (BDO type solitary wave. The ducting mechanism that enabled the solitary wave to propagate is also revealed from the wind profiler/RASS measurements. The combination of high-resolution instruments at the MRI site allow us to

  10. Measurement Properties of the Smartphone-Based B-B Score in Current Shoulder Pathologies

    Directory of Open Access Journals (Sweden)

    Claude Pichonnaz

    2015-10-01

    Full Text Available This study is aimed at the determination of the measurement properties of the shoulder function B-B Score measured with a smartphone. This score measures the symmetry between sides of a power-related metric for two selected movements, with 100% representing perfect symmetry. Twenty healthy participants, 20 patients with rotator cuff conditions, 23 with fractures, 22 with capsulitis, and 23 with shoulder instabilities were measured twice across a six-month interval using the B-B Score and shoulder function questionnaires. The discriminative power, responsiveness, diagnostic power, concurrent validity, minimal detectable change (MDC, minimal clinically important improvement (MCII, and patient acceptable symptom state (PASS were evaluated. Significant differences with the control group and significant baseline—six-month differences were found for the rotator cuff condition, fracture, and capsulitis patient groups. The B-B Score was responsive and demonstrated excellent diagnostic power, except for shoulder instability. The correlations with clinical scores were generally moderate to high, but lower for instability. The MDC was 18.1%, the MCII was 25.2%, and the PASS was 77.6. No floor effect was observed. The B-B Score demonstrated excellent measurement properties in populations with rotator cuff conditions, proximal humerus fractures, and capsulitis, and can thus be used as a routine test to evaluate those patients.

  11. Measurement properties of the smartphone-based B-B Score in current shoulder pathologies.

    Science.gov (United States)

    Pichonnaz, Claude; Duc, Cyntia; Gleeson, Nigel; Ancey, Céline; Jaccard, Hervé; Lécureux, Estelle; Farron, Alain; Jolles, Brigitte M; Aminian, Kamiar

    2015-10-22

    This study is aimed at the determination of the measurement properties of the shoulder function B-B Score measured with a smartphone. This score measures the symmetry between sides of a power-related metric for two selected movements, with 100% representing perfect symmetry. Twenty healthy participants, 20 patients with rotator cuff conditions, 23 with fractures, 22 with capsulitis, and 23 with shoulder instabilities were measured twice across a six-month interval using the B-B Score and shoulder function questionnaires. The discriminative power, responsiveness, diagnostic power, concurrent validity, minimal detectable change (MDC), minimal clinically important improvement (MCII), and patient acceptable symptom state (PASS) were evaluated. Significant differences with the control group and significant baseline-six-month differences were found for the rotator cuff condition, fracture, and capsulitis patient groups. The B-B Score was responsive and demonstrated excellent diagnostic power, except for shoulder instability. The correlations with clinical scores were generally moderate to high, but lower for instability. The MDC was 18.1%, the MCII was 25.2%, and the PASS was 77.6. No floor effect was observed. The B-B Score demonstrated excellent measurement properties in populations with rotator cuff conditions, proximal humerus fractures, and capsulitis, and can thus be used as a routine test to evaluate those patients.

  12. Bone mineral content measurement in small infants by single-photon absorptiometry: current methodologic issues

    Energy Technology Data Exchange (ETDEWEB)

    Steichen, J.J.; Asch, P.A.; Tsang, R.C.

    1988-07-01

    Single-photon absorptiometry (SPA), developed in 1963 and adapted for infants by Steichen et al. in 1976, is an important tool to quantitate bone mineralization in infants. Studies of infants in which SPA was used include studies of fetal bone mineralization and postnatal bone mineralization in very low birth weight infants. The SPA technique has also been used as a research tool to investigate longitudinal bone mineralization and to study the effect of nutrition and disease processes such as rickets or osteopenia of prematurity. At present, it has little direct clinical application for diagnosing bone disease in single patients. The bones most often used to measure bone mineral content (BMC) are the radius, the ulna, and, less often, the humerus. The radius appears to be preferred as a suitable bone to measure BMC in infants. It is easily accessible; anatomic reference points are easily palpated and have a constant relationship to the radial mid-shaft site; soft tissue does not affect either palpation of anatomic reference points or BMC quantitation in vivo. The peripheral location of the radius minimizes body radiation exposure. Trabecular and cortical bone can be measured separately. Extensive background studies exist on radial BMC in small infants. Most important, the radius has a relatively long zone of constant BMC. Finally, SPA for BMC in the radius has a high degree of precision and accuracy. 61 references.

  13. Current Measures on Radioactive Contamination in Japan: A Policy Situation Analysis.

    Science.gov (United States)

    Gilmour, Stuart; Miyagawa, Shoji; Kasuga, Fumiko; Shibuya, Kenji

    2016-01-01

    The Great East Japan Earthquake on 11th March 2011 and the subsequent Fukushima Dai-ichi nuclear power plant disaster caused radioactive contamination in the surrounding environment. In the immediate aftermath of the accident the Government of Japan placed strict measures on radio-contamination of food, and enhanced radio-contamination monitoring activities. Japan is a pilot country in the WHO Foodborne Disease Burden Epidemiology Reference Group (FERG), and through this initiative has an opportunity to report on policy affecting chemicals and toxins in the food distribution network. Nuclear accidents are extremely rare, and a policy situation analysis of the Japanese government's response to the Fukushima Dai-ichi nuclear accident is a responsibility of Japanese scientists. This study aims to assess Japan government policies to reduce radio-contamination risk and to identify strategies to strengthen food policies to ensure the best possible response to possible future radiation accidents. We conducted a hand search of all publicly available policy documents issued by the Cabinet Office, the Food Safety Commission, the Ministry of Health, Labor and Welfare (MHLW), the Ministry of Agriculture, Forestry and Fishery (MAFF) and prefectural governments concerning food safety standards and changes to radiation and contamination standards since March 11th, 2011. We extracted information on food shipment and sales restrictions, allowable radio-contamination limits, monitoring activities and monitoring results. The standard for allowable radioactive cesium (Cs-134 and Cs-137) of 100 Bq/Kg in general food, 50 Bq/Kg in infant formula and all milk products, and 10 Bq/Kg in drinking water was enforced from April 2012 under the Food Sanitation Law, although a provisional standard on radio-contamination had been applied since the nuclear accident. Restrictions on the commercial sale and distribution of specific meat, vegetable and fish products were released for areas at risk of

  14. Environmental radioactivity measurements and applications - Difficulties, current status and future trends

    Science.gov (United States)

    Anagnostakis, Marios J.

    2015-11-01

    For several decades natural and artificial radioactivity in the environment have been extensively studied all around the world. Nuclear accidents - mainly that of Chernobyl - have led to the development of the field of radioecology, while detector systems and techniques - with predominant that of γ-spectrometry - have been continuously developed through the years to meet researchers' needs. The study of natural radionuclides that was originally limited to 226Ra, 232Th and 40K was then extended to include radionuclides such as 234Th, 210Pb, 235U and 7Be, which allowed the study of radioactive equilibrium. Besides their importance from the radiation protection point of view, many radionuclides are also used as tracers of environmental processes, such as aerosol and transportation of air masses studies (7Be, 10Be, 22Na), soil erosion, sedimentation and geochronology (210Pb, 137Cs), marine ecosystems studies and studies related to climate change. All these studies require specialized samplings strategies and sampling preparation techniques as well as high quality measurements, while the improvement of detection limits is often of vital importance. This work is a review of environmental radioactivity measurements and applications, mainly focused in the field of γ-spectrometry, for which difficulties and limitations will be presented, together with future trends, new challenges and applications.

  15. Recent hydrographic measurements in the Lake Issyk Kul: Coastal currents, thermohaline structure, water quality indicators

    Science.gov (United States)

    Zavialov, Peter; Osadchiev, Alexander; Pelevin, Vadim; Konovalov, Boris; Goncharenko, Igor

    2015-04-01

    Issyk Kul is a deep (670 m) terminal lake in the northern Tian Shan mountains in eastern Kyrgyzstan. It is the tenth largest lake in the world by volume, and the second largest saline lake after the Caspian Sea. The lake is a Ramsar site of globally significant biodiversity. We report preliminary results of a field survey undertaken in the northern coastal part of the lake, off Cholpon-Ata township, on September 10-13, 2014. A fishery boat was used to carry out CTD profiling and water sampling at 16 stations. An UV fluorescent lidar working continuosly throughout the survey yielded surface concentrations of chlorophyll-a, suspended matter, and dissolved organic substances. In addition, we deployed 3 mooring stations equipped with current meters, all at approximately 15 m isobath, recording the velocity and direction of the near-bottom currents with 10 min sampling intervals. During the experiment, the coastal waters of the lake were fully mixed down to the depth of 15-20 m and nearly uniform vertically at salinity about 5 g/kg. The only exception referred to the areas adjacent to the mouths of small river and creeks, where stable salinity stratification developed at 0.01-0.03 g/kg per 1 m of depth. The temperature stratification generally followed the diurnal pattern. The dominant coastal currents were directed westward, which agrees with the established notion about the cyclonic character of the basin-scale circulation. Superimposed on this general cyclonic pattern, there was a persistent variability of currents at the periods of 17 to 24 hours, likely associated with the interplay between the inertial oscillation and signal of breeze in the wind forcing. There was an evidence of mesoscale eddies, possibly, associated with topographic features of the shoreline. The observed velocity in the near-bottom layer was about 9 cm/s on the average, with the maximum values exceeding 25 cm/s. The Issyk Kul lake is ultra-oligotrophic - the concentrations of chlorophyll-a were

  16. Methods for specific electrode resistance measurement during transcranial direct current stimulation.

    Science.gov (United States)

    Khadka, Niranjan; Rahman, Asif; Sarantos, Chris; Truong, Dennis Q; Bikson, Marom

    2015-01-01

    Monitoring of electrode resistance during tDCS is considered important for tolerability and safety. Conventional resistance measurement methods do not isolate individual electrode resistance and for HD-tDCS devices, cross talk across electrodes makes concurrent resistance monitoring unreliable. We propose a novel method to monitor individual electrode resistance during tDCS, using a super-position of direct current with a test-signal (low intensity and low frequency sinusoids with electrode-specific frequencies) and a sentinel electrode (not used for DC). We developed and solved lumped-parameter models of tDCS electrodes with or without a sentinel electrode to validate this methodology. Assumptions were tested and parameterized in participants using forearm stimulation combining tDCS (2 mA) and test-signals (38 and 76 μA pk-pk at 1 Hz, 10 Hz, & 100 Hz) and an in vitro test (creating electrode failure modes). DC and AC component voltages across the electrodes were compared and participants were asked to rate subjective pain. A sentinel electrode is required to isolate electrode resistance in a two-electrode tDCS system. Cross talk aggravated with electrode proximity and resistance mismatch in multi-electrode resistance tracking could be corrected using proposed approaches. Average voltage and pain scores were not significantly different across test current intensities and frequencies. Using our developed method, a test signal can predict DC electrode resistance. Since unique test frequencies can be used at each tDCS electrode, specific electrode resistance can be resolved for any number of stimulating channels - a process made still more robust by the use of a sentinel electrode. Published by Elsevier Inc.

  17. The Current Problems of Urban Ecological Food Construction and Counter Measures

    Directory of Open Access Journals (Sweden)

    Xiuxia LI

    2015-01-01

    Full Text Available The study presents problems of food ecological construction on municipal virescence, water environment, water ecology and landscape as well as urban ecological system of quantity, quality and capacity in our country and analysis the causes of these problems. Measures are proposed, such as knowing the meaning of municipal eco-environmental construction, increasing the food environmental protect consciousness of managers and enhancing the municipal eco-systemic construction.

  18. Current Measures on Radioactive Contamination in Japan: A Policy Situation Analysis.

    Directory of Open Access Journals (Sweden)

    Stuart Gilmour

    Full Text Available The Great East Japan Earthquake on 11th March 2011 and the subsequent Fukushima Dai-ichi nuclear power plant disaster caused radioactive contamination in the surrounding environment. In the immediate aftermath of the accident the Government of Japan placed strict measures on radio-contamination of food, and enhanced radio-contamination monitoring activities. Japan is a pilot country in the WHO Foodborne Disease Burden Epidemiology Reference Group (FERG, and through this initiative has an opportunity to report on policy affecting chemicals and toxins in the food distribution network. Nuclear accidents are extremely rare, and a policy situation analysis of the Japanese government's response to the Fukushima Dai-ichi nuclear accident is a responsibility of Japanese scientists. This study aims to assess Japan government policies to reduce radio-contamination risk and to identify strategies to strengthen food policies to ensure the best possible response to possible future radiation accidents.We conducted a hand search of all publicly available policy documents issued by the Cabinet Office, the Food Safety Commission, the Ministry of Health, Labor and Welfare (MHLW, the Ministry of Agriculture, Forestry and Fishery (MAFF and prefectural governments concerning food safety standards and changes to radiation and contamination standards since March 11th, 2011. We extracted information on food shipment and sales restrictions, allowable radio-contamination limits, monitoring activities and monitoring results. The standard for allowable radioactive cesium (Cs-134 and Cs-137 of 100 Bq/Kg in general food, 50 Bq/Kg in infant formula and all milk products, and 10 Bq/Kg in drinking water was enforced from April 2012 under the Food Sanitation Law, although a provisional standard on radio-contamination had been applied since the nuclear accident. Restrictions on the commercial sale and distribution of specific meat, vegetable and fish products were released for

  19. Multicenter intestinal current measurements in rectal biopsies from CF and non-CF subjects to monitor CFTR function.

    Directory of Open Access Journals (Sweden)

    John P Clancy

    Full Text Available Intestinal current measurements (ICM from rectal biopsies are a sensitive means to detect cystic fibrosis transmembrane conductance regulator (CFTR function, but have not been optimized for multicenter use. We piloted multicenter standard operating procedures (SOPs to detect CFTR activity by ICM and examined key questions for use in clinical trials. SOPs for ICM using human rectal biopsies were developed across three centers and used to characterize ion transport from non-CF and CF subjects (two severe CFTR mutations. All data were centrally evaluated by a blinded interpreter. SOPs were then used across four centers to examine the effect of cold storage on CFTR currents and compare CFTR currents in biopsies from one subject studied simultaneously either at two sites (24 hours post-biopsy or when biopsies were obtained by either forceps or suction. Rectal biopsies from 44 non-CF and 17 CF subjects were analyzed. Mean differences (µA/cm(2; 95% confidence intervals between CF and non-CF were forskolin/IBMX=102.6(128.0 to 81.1, carbachol=96.3(118.7 to 73.9, forskolin/IBMX+carbachol=200.9(243.1 to 158.6, and bumetanide=-44.6 (-33.7 to -55.6 (P<0.005, CF vs non-CF for all parameters. Receiver Operating Characteristic curves indicated that each parameter discriminated CF from non-CF subjects (area under the curve of 0.94-0.98. CFTR dependent currents following 18-24 hours of cold storage for forskolin/IBMX, carbachol, and forskolin/IBMX+carbachol stimulation (n=17 non-CF subjects were 44%, 47.5%, and 47.3%, respectively of those in fresh biopsies. CFTR-dependent currents from biopsies studied after cold storage at two sites simultaneously demonstrated moderate correlation (n=14 non-CF subjects, Pearson correlation coefficients 0.389, 0.484, and 0.533. Similar CFTR dependent currents were detected from fresh biopsies obtained by either forceps or suction (within-subject comparisons, n=22 biopsies from three non-CF subjects. Multicenter ICM is a

  20. Effectiveness of thigh-to-thigh current path for the measurement of abdominal fat in bioelectrical impedance analysis.

    Science.gov (United States)

    Hong, Ki Hwan; Lim, Yong Gyu; Park, Kwang Suk

    2009-12-01

    We present a new method measuring body impedance using a thigh-to-thigh current path, which can reflect the abdominal fat portion more sensitively and can be conveniently applied during the daily use on a toilet seat. Two pairs of electrodes were installed on a toilet seat to provide current and to permit voltage measurement through a thigh-to-thigh current path. The effectiveness of the method was compared with conventional foot-to-foot and hand-to-foot current paths by simulation and by experiments referenced to computed tomography (CT) image analysis. Body impedance using three different current paths was measured, and abdominal CT images were acquired for eight subjects. Measured body impedances were compared with the visceral to subcutaneous fat ratio (VF/SF) calculated from the CT-determined abdominal fat volume. The thigh-to-thigh current path was about 75% more sensitive in abdominal fat measurement than the conventional current paths in simulation experiments and displayed a higher VF/SF correlation (r = 0.768) than the foot-to-foot (r = 0.425) and hand-to-foot (r = 0.497) current paths.