WorldWideScience

Sample records for current study builds

  1. Building Transdisciplinary Environmental Studies

    DEFF Research Database (Denmark)

    Holm, Jesper

    We will in this paper approach the challenge of building integrated environmental studies by presenting a crude frame of analysis which take into account both the physical aspects and the social-discursive articulations of environmental problems. This framework partly mirrors the approach of our ...

  2. Building Transdisciplinary Environmental Studies

    DEFF Research Database (Denmark)

    Holm, Jesper

    We will in this paper approach the challenge of building integrated environmental studies by presenting a crude frame of analysis which take into account both the physical aspects and the social-discursive articulations of environmental problems. This framework partly mirrors the approach of our...... department (Dept. of Environment, Technology and Social Studies, Roskilde University), and has originally in another version been presented in the book “Miljøregulering - tværvidenskabelige studier (Environmental Regulation. Interdisciplinary Studies)” (Holm, Kjærgård & Pedersen eds. 1997, in Danish) written...

  3. Systems thinking in practice: the current status of the six WHO building blocks for health system strengthening in three BHOMA intervention districts of Zambia: a baseline qualitative study.

    Science.gov (United States)

    Mutale, Wilbroad; Bond, Virginia; Mwanamwenge, Margaret Tembo; Mlewa, Susan; Balabanova, Dina; Spicer, Neil; Ayles, Helen

    2013-08-01

    The primary bottleneck to achieving the MDGs in low-income countries is health systems that are too fragile to deliver the volume and quality of services to those in need. Strong and effective health systems are increasingly considered a prerequisite to reducing the disease burden and to achieving the health MDGs. Zambia is one of the countries that are lagging behind in achieving millennium development targets. Several barriers have been identified as hindering the progress towards health related millennium development goals. Designing an intervention that addresses these barriers was crucial and so the Better Health Outcomes through Mentorship (BHOMA) project was designed to address the challenges in the Zambia's MOH using a system wide approach. We applied systems thinking approach to describe the baseline status of the Six WHO building blocks for health system strengthening. A qualitative study was conducted looking at the status of the Six WHO building blocks for health systems strengthening in three BHOMA districts. We conducted Focus group discussions with community members and In-depth Interviews with key informants. Data was analyzed using Nvivo version 9. The study showed that building block specific weaknesses had cross cutting effect in other health system building blocks which is an essential element of systems thinking. Challenges noted in service delivery were linked to human resources, medical supplies, information flow, governance and finance building blocks either directly or indirectly. Several barriers were identified as hindering access to health services by the local communities. These included supply side barriers: Shortage of qualified health workers, bad staff attitude, poor relationships between community and health staff, long waiting time, confidentiality and the gender of health workers. Demand side barriers: Long distance to health facility, cost of transport and cultural practices. Participating communities seemed to lack the capacity

  4. Cognitive Study of Building Metaphor

    Institute of Scientific and Technical Information of China (English)

    牛惠君

    2015-01-01

    Metaphor is a universal phenomenon,the traditional metaphor studies it as a means of rhetoric,but metaphor of modern sees it as a cognitive phenomenon.In our life most of the everyday language is metaphor,our mind is also the metaphor.Meta-phor has become an indispensable tool for understanding the world.There are a lot of “building”metaphorical expressions in the life, construction is an important component of people’s lives. K?vecses (2002)discussed briefly some conceptual metaphors of the construction in English,Deignan (2001)make a compre-hensive study on building metaphors which underlie some metaphor expression of “building and construction”.Lan Chun (2003)only referred to “theory is building”,but the concept of “life,relationships”can be understood through building concept,these relative ab-stract concepts can be understood by clear concrete building concept.Hence the studies of building metaphors have not been systematic and comprehensive,people seldom study it.We plan to give a contrastive study of building metaphors.This will further deepen peo-ple’s understanding of building metaphors and enrich the cognitive studies of metaphor.

  5. Analogue Behavioral Modeling of Switched-Current Building Block Circuits

    Institute of Scientific and Technical Information of China (English)

    ZENG Xuan; WANG Wei; SHI Jianlei; TANG Pushan; D.ZHOU

    2001-01-01

    This paper proposes a behavioral modeling technique for the second-generation switched-current building block circuits. The proposed models are capable of capturing the non-ideal behavior of switched-current circuits, which includes the charge injection effects and device mismatch effects. As a result, system performance degradations due to the building block imperfections can be detected at the early design stage by fast behavioral simulations. To evaluate the accuracy of the proposed models, we developed a time-domain behavioral simulator. Experimental results have shown that compared with SPICE, the behavioral modeling error is less than 2.15%, while behavioral simulation speed up is 4 orders in time-domain.

  6. Current Automotive Holometry Studies

    Science.gov (United States)

    Marchi, Mitchell M.; Snyder, D. S.

    1990-04-01

    Holometry studies of automotive body and powertrain components have become a very useful high resolution test methodology to knowledgeable Ford engineering personnel. Current examples of studies that represent the static or dynamic operational conditions of the automotive test component are presented. Continuous wave laser holometry, computer aided holometry (CAH) and pulsed laser holometry were the holometric techniques used to study the following subjects: (1) body in prime (BIP) vibration modes, (2) transmission flexplate stud-torque converter deformation due to engine torque pulses, (3) engine cylinder head and camshaft support structure deformation due to cylinder pressure and (4) engine connecting rod/cap lift-off. Static and dynamic component loading and laboratory techniques required to produce usable and valid test results are discussed along with possible conclusions for the engineering concerns.

  7. Canister storage building trade study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Swenson, C.E. [Westinghouse Hanford Co., Richland, WA (United States)

    1995-05-01

    This study was performed to evaluate the impact of several technical issues related to the usage of the Canister Storage Building (CSB) to safely stage and store N-Reactor spent fuel currently located at K-Basin 100KW and 100KE. Each technical issue formed the basis for an individual trade study used to develop the ROM cost and schedule estimates. The study used concept 2D from the Fluor prepared ``Staging and Storage Facility (SSF) Feasibility Report`` as the basis for development of the individual trade studies.

  8. Waste Handeling Building Conceptual Study

    Energy Technology Data Exchange (ETDEWEB)

    G.W. Rowe

    2000-11-06

    The objective of the ''Waste Handling Building Conceptual Study'' is to develop proposed design requirements for the repository Waste Handling System in sufficient detail to allow the surface facility design to proceed to the License Application effort if the proposed requirements are approved by DOE. Proposed requirements were developed to further refine waste handling facility performance characteristics and design constraints with an emphasis on supporting modular construction, minimizing fuel inventory, and optimizing facility maintainability and dry handling operations. To meet this objective, this study attempts to provide an alternative design to the Site Recommendation design that is flexible, simple, reliable, and can be constructed in phases. The design concept will be input to the ''Modular Design/Construction and Operation Options Report'', which will address the overall program objectives and direction, including options and issues associated with transportation, the subsurface facility, and Total System Life Cycle Cost. This study (herein) is limited to the Waste Handling System and associated fuel staging system.

  9. Preservation of adobe buildings. Study of materials

    Science.gov (United States)

    Velosa, A.; Rocha, F.; Costa, C.; Varum, H.

    2012-04-01

    Adobe buildings are common in the central region of Portugal due to the lack of natural stone in the surrounding area. This type of construction technique lasted until the 20th Century, at which time cementitious materials, with faster hardening and greater structural capacity substituted traditional materials and techniques. Currently, a significant percentage of these buildings is vacant and many are degraded and in need of conservation actions. Adobes from central Portugal are distinctive as they are lightly coloured and made from air lime and quarry sand. Although some adobes were manufactured locally, most were produced almost 'industrially' and sold to nearby regions. In order to preserve this heritage, conservation actions must be undertaken. So as to ensure the adequacy of these actions and compatibility between original materials and new ones, a thorough study of adobe compostion is mandatory. The current study is an initial step in the characterization of earth based construction materials from central Portugal. Adobe samples were collected from residential buildings in two different locations. The determination of the composition of adobe blocks encompassed the determination of the binder fraction and of their chemical composition and also the particle size analysis of the aggregate. For this purpose FRX analysis, acid dissolution and dry sieving were performed. Methylene blue test was also executed in order to determine the clay fraction. Additionally, the mineral composition of powder samples and oriented samples was performed using XRD analysis in order to determine the clay minerals present in the blocks. As adobe blocks are extremely prone to the action of water the Geelong test was undertaken in order to provide information in terms of durability. It was concluded that air lime was generally used in adobe compositions. However, the clay content varies in adobes from different regions, providing distinct durability characteristics to these materials.

  10. Rigid Biobased Building Blocks: Current Developments and Outlook

    NARCIS (Netherlands)

    Es, van D.S.

    2013-01-01

    In this perspectives paper we will look at the state-of-the-art in rigid renewable building blocks for biobased materials, with a focus on two types of carbohydrate-based difunctional monomers, i.e.,isohexides and furan-2,5-dicarboxylic acid (FDCA).

  11. Case studies of building pathology in cultural heritage

    CERN Document Server

    2016-01-01

    This book highlights new developments in the field of building pathology and rehabilitation, taking an in-depth look into current approaches to the surveying of buildings and the study of defect diagnosis, prognosis and remediation. Including a number of real-world case studies and a detailed set of references for further reading, the book will appeal to a wide readership of scientists, practitioners, students and lecturers.

  12. Energy management study: A proposed case of government building

    Energy Technology Data Exchange (ETDEWEB)

    Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd [School of Technology Management and Logistics, Universiti Utara Malaysia, 06010 Sintok, Kedah (Malaysia); Baharum, Mohd Faizal [School of Building, Housing and Planning, Universiti Sains Malaysia, 11800 Penang (Malaysia)

    2015-05-15

    Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount of energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building.

  13. Energy management study: A proposed case of government building

    Science.gov (United States)

    Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Baharum, Mohd Faizal

    2015-05-01

    Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount of energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building.

  14. The current state of computing in building design and construction

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt; Andersen, Tom

    1996-01-01

    An exhaustive IT-survey is made in the Danish construction industry in 1995. The outcome of this survey is outlined for a selected number of issues, such as number and types of CAD-systems, data base systems, networking etc. The survey shows, that the use of IT is massive. A detailed investigation...... in relation to AI-based systems is presented. This indicates that AI-based systems/approaches have not yet penetrated in the Danish construction industry. Determinants relevant to technology penetration are described, and the immediate potential for AI-penetration are discussed and compared with the actual...... status. Finally, we conclude that there is a severe lack of awareness about AI-systems in the building sector....

  15. Towards Sustainable Building: Case Study on Romania

    Directory of Open Access Journals (Sweden)

    Ana Maria Marinoiu

    2016-06-01

    Full Text Available The purpose of this article is to analyze the actual situation of the green buildings in our country but also the degree in which the real estate developers are involved in such projects. The study was conducted by combining a wide variety of sources, such as regulations, position papers, as well as articles and research reports. The results of the research show that the market for green buildings in Romania is at an early stage of development however, there are prerequisites for its development. In the future, green building will become the standard in the construction industry.

  16. Building America Case Study: Solar Water Heating in Multifamily Buildings

    Energy Technology Data Exchange (ETDEWEB)

    R. Aldrich and J. Williamson

    2016-05-01

    Solar domestic hot water (SDHW) systems have been installed on buildings for decades, but because of relatively high costs they have not achieved significant market penetration in most of the country. As more buildings move towards zero net energy consumption, however, many designers and developers are looking more closely at SDHW. In multifamily buildings especially, SDHW may be more practical for several reasons: (1) When designing for zero net energy consumption, solar water heating may be part of the lowest cost approach to meet water heating loads. (2.) Because of better scale, SDHW systems in multifamily buildings cost significantly less per dwelling than in single-family homes. (3) Many low-load buildings are moving away from fossil fuels entirely. SDHW savings are substantially greater when displacing electric resistance water heating. (4) In addition to federal tax incentives, some states have substantial financial incentives that dramatically reduce the costs (or increase the benefits) of SDHW systems in multifamily buildings. With support form the U.S. DOE Building America program, the Consortium for Advanced Residential Buildings (CARB) worked with a developer in western Massachusetts to evaluate a SDHW system on a 12-unit apartment building. Olive Street Development completed construction in spring of 2014, and CARB has been monitoring performance of the water heating systems since May 2014.

  17. Study on the Current Situation and Countermeasures of Building Productive Training Bases in Vocational Colleges%高职校内生产性实训基地建设现状与对策研究

    Institute of Scientific and Technical Information of China (English)

    覃远霞

    2012-01-01

    创造优良的实践教学环境对高职院校培养技能型人才至关重要,在校内建设生产性实训基地是一种工学结合实践的有效途径。本文简要阐述了校内生产性实训基地的内涵与特征,分析了高职校内生产性实训基地的建设现状及存在问题,最后提出了加强高职校内生产性实训基地建设的对策。%To cultivate skilled talents, it is vital for vocational colleges to create good practice enviroment. To build productive training bases on campus is a practical effective way to combine learning and practice. This thesis briefly describes the connotation and characteristics of productive training base,and analyses the current situation and problems building productive training bases in vocational colleges. In the end, the thesis puts forward the countermeasures to reinforce building productive training bases in vocational colleges.

  18. Building Visual Artists’ Resilience Capabilities: Current Educator Strategies and Methods

    Directory of Open Access Journals (Sweden)

    Eileen Maree Siddins

    2016-07-01

    Full Text Available Enrolments in higher education programs in the creative and performing arts are increasing in many countries. Yet graduates of these degrees, who enter the broad sector known as the creative industries, face particular challenges in terms of securing long-term and sustainable employment. In addition, creative and performing artists face a range of mental challenges, caused by such factors as: the solitary nature of much creative practice, critical feedback by audiences and gatekeepers, or the general pressures associated with maintaining artistic relevance or integrity. The concepts of resilience and professional wellbeing are therefore highly relevant to those who pursue a career in creative industries, and while there has been an emerging body of work in this area, to date it has focussed on the performing arts area (e.g. music, theatre. Hence, in order to expand knowledge relevant to resilience and artists, this paper sets out to explore the extent to which current educators in the Australian context specifically address these issues within higher visual arts curricula; specifically the areas of illustration, design, film and photography. This was achieved via interviews with seventeen current academics working in these areas. The findings propose that higher education providers of programs in the visual arts consider placing a stronger emphasis on the embedded development of resilience and professional wellbeing capacities.

  19. The current state of computing in building design and practise

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt; Andersen, Tom

    1996-01-01

    The paper outlines a general survey on computer use in the danish AEC-sector, including a detailed study of the use of knowledge-based systems. It is colcluded that the use of AI-based technology is next to nothing, simply because a lack of awareness of such technology.......The paper outlines a general survey on computer use in the danish AEC-sector, including a detailed study of the use of knowledge-based systems. It is colcluded that the use of AI-based technology is next to nothing, simply because a lack of awareness of such technology....

  20. Sustainable building assessment tool: integrating sustainability into current design and building processes

    CSIR Research Space (South Africa)

    Gibberd, Jeremy T

    2008-09-01

    Full Text Available and economic criteria as well as environmental indicators. The paper reviews definitions of sustainable development and current measures of global and national sustainability performance and compares this to criteria used in the SBAT. It shows that the SBAT...

  1. Current studies on megapode phylogeny

    NARCIS (Netherlands)

    Brom, T.G.; Dekker, R.W.R.J.

    1992-01-01

    Hypotheses regarding the phylogenetic relationships between megapodes and other birds are reviewed, and it is concluded that the available evidence supports a sistergroup relationship between megapodes and all other galliforms. Current studies in this direction are discussed. The resolvement of intr

  2. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building

    Directory of Open Access Journals (Sweden)

    Nadeem Khan

    2014-03-01

    Full Text Available Background: Chemical exposure is a major health problem globally. Poison control centers (PCCs play a leading role both in developed and developing countries in the prevention and control of poisonous chemical exposures. In this study, we aimed to assess the current state of PCCs in Pakistan and highlight capacity building needs in these centers. Methods: A cross-sectional survey of the two registered PCCs was done during August – December 2011. Necessary services of the PCCs were evaluated and the data were recorded on a predesigned checklist. Results: Both PCCs are affiliated to a tertiary care hospital. Clinical services to poisoned patients were available 24 hours a day / 7 days a week. Information on common local products was available to poison center staff. Both centers were involved in undergraduate and post graduate teaching. Telephone poison information service was not available in either of centers. There was a limited capacity for qualitative and analytical toxicology. Common antidotes were available. There were limited surveillance activities to capture toxic risks existing in the community and also a deficiency was observed in chemical disaster planning. Conclusion: PCCs in Pakistan need capacity building for specialized training in toxicology, toxicovigilance, chemical disaster planning, analytical laboratory tests and telephone service for consultation in poisoning cases.   How to cite this article: Khan NU, Mir MU, Khan UR, Khan AR, Ara J, Raja K, et al. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building. Asia Pac J Med Toxicol 2014;3:31-5.

  3. Building Assessment Survey and Evaluation Study Summarized Data - HVAC Characteristics

    Science.gov (United States)

    In the Building Assessment Survey and Evaluation (BASE) Study Information on the characteristics of the heating, ventilation, and air conditioning (HVAC) system(s) in the entire BASE building including types of ventilation, equipment configurations, and operation and maintenance issues was acquired by examining the building plans, conducting a building walk-through, and speaking with the building owner, manager, and/or operator.

  4. Why study higher education and capacity building in Africa?

    DEFF Research Database (Denmark)

    Adriansen, Hanne Kirstine; Madsen, Lene Møller; Jensen, Stig

    2015-01-01

    innovative approach to higher education and capacity building, namely by studying this through ‘geographies of knowledge’. This is an interdisciplinary field that pays attention to the ways scientific knowledge is produced and consumed with a special focus on geography. By using a geographical approach...... for exploring the current and future development of teaching and knowledge production in Africa, we want to explore how scientific knowledge is negotiated and contested in parallel to societal changes in general and capacity building in particular, and thus how scientific knowledge becomes local. Then we......The chapter begins by arguing why it is interesting to study higher education and capacity building in Africa. Without essentialising Africa, we wish to contribute to a better understanding of the multi-faceted and dynamic development of contemporary universities in Africa. Then we explain our...

  5. [Current studies in myotonic dystrophy].

    Science.gov (United States)

    Zhao, Yimeng; Ishiura, Shoichi

    2014-03-01

    Myotonic dystrophy (DM) is a genetic, progressive, multisystemic disease with muscular disorder as its primary symptom. There are two types of DM (DM1 and DM2) caused by mutations in different genes, and in Japan, DM occurs with an incidence of approximately 1 in 20,000. The pathogenic mechanism underlying the disease is RNA toxicity caused by transcripts of aberrantly elongated CTG or CCTG repeats located in the 3' untranslated region or in the intron. The current treatments for DM is limited to symptomatic care. In this review, we will discuss several new therapeutic strategies based on recent studies of RNA toxicity.

  6. A comparative study of seismic provisions between International Building Code 2003 and Uniform Building Code 1997

    Institute of Scientific and Technical Information of China (English)

    Wenshen Pong; Zu-Hsu Lee; Anson Lee

    2006-01-01

    This study focuses on the comparison of the Uniform Building Code (UBC) 1997 and International Building Code (IBC) 2003 in relation to the seismic design and analysis of special steel moment resisting frame buildings (SMRF).This paper formulates a numerical study of a steel SMRF building, studied in four different situations, namely: as an office building in San Francisco; as an office building in Sacramento; as an essential facility in San Francisco, and as an essential facility in Sacramento. The analytical results of the model buildings are then compared and analyzed taking note of any significant differences. This case study explores variations in the results obtained using the two codes, particularly the design base shear and drift ratios as they relate to different locations and occupancy use. This study also proves that IBC 2003is more stringent for the redundancy factor under design category E for the SMRF building, and drift limits for essential facilities.

  7. Non-Destructive Current Sensing for Energy Efficiency Monitoring in Buildings with Environmental Certification.

    Science.gov (United States)

    Mota, Lia Toledo Moreira; Mota, Alexandre de Assis; Coiado, Lorenzo Campos

    2015-07-10

    Nowadays, buildings environmental certifications encourage the implementation of initiatives aiming to increase energy efficiency in buildings. In these certification systems, increased energy efficiency arising from such initiatives must be demonstrated. Thus, a challenge to be faced is how to check the increase in energy efficiency related to each of the employed initiatives without a considerable building retrofit. In this context, this work presents a non-destructive method for electric current sensing to assess implemented initiatives to increase energy efficiency in buildings with environmental certification. This method proposes the use of a sensor that can be installed directly in the low voltage electrical circuit conductors that are powering the initiative under evaluation, without the need for reforms that result in significant costs, repair, and maintenance. The proposed sensor consists of three elements: an air-core transformer current sensor, an amplifying/filtering stage, and a microprocessor. A prototype of the proposed sensor was developed and tests were performed to validate this sensor. Based on laboratory tests, it was possible to characterize the proposed current sensor with respect to the number of turns and cross-sectional area of the primary and secondary coils. Furthermore, using the Least Squares Method, it was possible to determine the efficiency of the air core transformer current sensor (the best efficiency found, considering different test conditions, was 2%), which leads to a linear output response.

  8. Non-Destructive Current Sensing for Energy Efficiency Monitoring in Buildings with Environmental Certification

    Directory of Open Access Journals (Sweden)

    Lia Toledo Moreira Mota

    2015-07-01

    Full Text Available Nowadays, buildings environmental certifications encourage the implementation of initiatives aiming to increase energy efficiency in buildings. In these certification systems, increased energy efficiency arising from such initiatives must be demonstrated. Thus, a challenge to be faced is how to check the increase in energy efficiency related to each of the employed initiatives without a considerable building retrofit. In this context, this work presents a non-destructive method for electric current sensing to assess implemented initiatives to increase energy efficiency in buildings with environmental certification. This method proposes the use of a sensor that can be installed directly in the low voltage electrical circuit conductors that are powering the initiative under evaluation, without the need for reforms that result in significant costs, repair, and maintenance. The proposed sensor consists of three elements: an air-core transformer current sensor, an amplifying/filtering stage, and a microprocessor. A prototype of the proposed sensor was developed and tests were performed to validate this sensor. Based on laboratory tests, it was possible to characterize the proposed current sensor with respect to the number of turns and cross-sectional area of the primary and secondary coils. Furthermore, using the Least Squares Method, it was possible to determine the efficiency of the air core transformer current sensor (the best efficiency found, considering different test conditions, was 2%, which leads to a linear output response.

  9. Building an information security strategy for EHR: guidelines for assessing the current situation.

    Science.gov (United States)

    Mohammad, Yara; Stergioulas, Lampros

    2010-01-01

    This paper is looking at electronic health record (EHR) systems and their information security strategy. It focuses on the first step of building an information security strategy which is analysing the current situation of an EHR system. This research is based on different research methods applied to different EHR systems. In this paper we define eight elements that can be used as guidelines for how best to assess the current situation of any EHR system.

  10. Building

    OpenAIRE

    Seavy, Ryan

    2014-01-01

    Building for concrete is temporary. The building of wood and steel stands against the concrete to give form and then gives way, leaving a trace of its existence behind. Concrete is not a building material. One does not build with concrete. One builds for concrete. MARCH

  11. Daylight case study building. A working document of Task 21. Daylight in buildings

    Energy Technology Data Exchange (ETDEWEB)

    Kristensen, P.E.

    1997-05-01

    This report describes 16 buildings, that have been selected as Task 21 case studies. Totally 15 buildings will be monitored and described according to the procedures developed in Task 21. One case study building is in design stage, the new ISE Headquarters in Freiburg, and this project has been selected as a case study on building design. The monitoring programme for the buildings runs through 1997 until mid 1998. The present document serves as a basic document describing the case studies, until the projects will be described in more detail, including monitoring results, towards the end of the Task. (au)

  12. Small- and Medium-Sized Commercial Building Monitoring and Controls Needs: A Scoping Study

    Energy Technology Data Exchange (ETDEWEB)

    Katipamula, Srinivas; Underhill, Ronald M.; Goddard, James K.; Taasevigen, Danny J.; Piette, M. A.; Granderson, J.; Brown, Rich E.; Lanzisera, Steven M.; Kuruganti, T.

    2012-10-31

    Buildings consume over 40% of the total energy consumption in the U.S. A significant portion of the energy consumed in buildings is wasted because of the lack of controls or the inability to use existing building automation systems (BASs) properly. Much of the waste occurs because of our inability to manage and controls buildings efficiently. Over 90% of the buildings are either small-size (<5,000 sf) or medium-size (between 5,000 sf and 50,000 sf); these buildings currently do not use BASs to monitor and control their building systems from a central location. According to Commercial Building Energy Consumption Survey (CBECS), about 10% of the buildings in the U.S. use BASs or central controls to manage their building system operations. Buildings that use BASs are typically large (>100,000 sf). Lawrence Berkeley National Laboratory (LBNL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL) were asked by the U.S. Department of Energy’s (DOE’s) Building Technologies Program (BTP) to identify monitoring and control needs for small- and medium-sized commercial buildings and recommend possible solutions. This study documents the needs and solutions for small- and medium-sized buildings.

  13. [Current status of autism studies].

    Science.gov (United States)

    Kurita, H

    2001-01-01

    The current status of autism studies was reviewed based on English articles published during the 1990s. Although the concepts of autism and pervasive developmental disorders (PDD) are established, diagnostic criteria of PDDNOS or atypical autism, which is frequently difficult to differentiate from autism, need to be established. The prevalence of autism has been estimated as about 0.05% in the U.S and many European countries, while it was reported to be 0.1% or higher in Japan and some European countries, though the reasons for this difference are unclear. High-functioning (IQ > or = 70) autism may not be as rare a condition as previously thought and both its difference from and similarity to Asperger's syndrome, the highest functioning PDD subtype, need clarification. About 20 to 40% of children with autism lose meaningful words by the age of 2 years and display autistic symptoms thereafter. Such autism, called the setback type in Japan, has been demonstrated to have a poorer adolescent/adult outcome compared to autism without setback and its relationship with childhood disintegrative disorder, which displays a clearer regression after normal development for at least the first 2 years of life, needs to be addressed. The etiology of autism is now considered mostly genetic for reasons, such as the significantly higher concordance rate of autism in identical twin pairs (60-80%) than in fraternal twin pairs (0-10%) and an 3-5% incidence of autism among sibs of an autism proband, 30 to 100 times higher than that in the general population. The involvement of several genes is implicated to create susceptibility for autism, yet the responsible genes have not been identified. Although there is no medication to cure autism, some psychotropic drugs, such as antipsychotics and SSRIs, seem effective for behavior problems in autism patients. Psychosocial treatments are the main therapeutic approach to autism, though they are yet to be well systematized. It is important to

  14. Building Energy Information Systems: User Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Granderson, Jessica; Piette, Mary Ann; Ghatikar, Girish

    2010-03-22

    Measured energy performance data are essential to national efforts to improve building efficiency, as evidenced in recent benchmarking mandates, and in a growing body of work that indicates the value of permanent monitoring and energy information feedback. This paper presents case studies of energy information systems (EIS) at four enterprises and university campuses, focusing on the attained energy savings, and successes and challenges in technology use and integration. EIS are broadly defined as performance monitoring software, data acquisition hardware, and communication systems to store, analyze and display building energy information. Case investigations showed that the most common energy savings and instances of waste concerned scheduling errors, measurement and verification, and inefficient operations. Data quality is critical to effective EIS use, and is most challenging at the subsystem or component level, and with non-electric energy sources. Sophisticated prediction algorithms may not be well understood but can be applied quite effectively, and sites with custom benchmark models or metrics are more likely to perform analyses external to the EIS. Finally, resources and staffing were identified as a universal challenge, indicating a need to identify additional models of EIS use that extend beyond exclusive in-house use, to analysis services.

  15. Current Status and Future Scenarios of Residential Building Energy Consumption in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nan; Nishida, Masaru; Gao, Weijun

    2008-12-01

    China's rapid economic expansion has propelled it into the ranks of the largest energy consuming nation in the world, with energy demand growth continuing at a pace commensurate with its economic growth. Even though the rapid growth is largely attributable to heavy industry, this in turn is driven by rapid urbanization process, by construction materials and equipment produced for use in buildings. Residential energy is mostly used in urban areas, where rising incomes have allowed acquisition of home appliances, as well as increased use of heating in southern China. The urban population is expected to grow by 20 million every year, accompanied by construction of 2 billion square meters of buildings every year through 2020. Thus residential energy use is very likely to continue its very rapid growth. Understanding the underlying drivers of this growth helps to identify the key areas to analyze energy efficiency potential, appropriate policies to reduce energy use, as well as to understand future energy in the building sector. This paper provides a detailed, bottom-up analysis of residential building energy consumption in China using data from a wide variety of sources and a modeling effort that relies on a very detailed characterization of China's energy demand. It assesses the current energy situation with consideration of end use, intensity, and efficiency etc, and forecast the future outlook for the critical period extending to 2020, based on assumptions of likely patterns of economic activity, availability of energy services, technology improvement and energy intensities.

  16. Team building in an Elementary School: A Descriptive Case Study

    OpenAIRE

    Holleran, David J.

    1997-01-01

    TEAM BUILDING IN AN ELEMENTARY SCHOOL: A DESCRIPTIVE CASE STUDY David J. Holleran (ABSTRACT) The purpose of this study was to examine the team-building process implemented in an elementary school. Research questions were developed on what team-building activities took place, when the activities took place, what expenses were involved, what the outcomes were, and what the reactions of the staff were towards team building activities implemented at the school. Twen...

  17. Green Facility Management in a Shanghai Office Building : A Case Study of the "Asia Building"

    OpenAIRE

    Yunqing, Liang

    2011-01-01

    This paper aims to explore how well green facility management has performed in Shanghai office building and finds the possible way to improve the situation. Together with two interviews, questionnaire based on benchmarking approach is conducted in a case study of the Asia Building, which lead to the conclusion that green facility management has done a fair work in Asia Building, and suggestions that laws and regulations related to green facility management should be established; governmental ...

  18. Post-Occupancy Evaluation of UK Library Building Projects: Some Examples of Current Activity

    Directory of Open Access Journals (Sweden)

    Suzanne Enright

    2002-07-01

    Full Text Available Post-occupancy evaluations of buildings ask questions and provide answers on how buildings actually work in technical, social and management terms for the end-users1. They can have a significant impact on creating change in terms of improving use of any building. Post-occupancy evaluations can show what works, and what does not – yet they are not common and apparently have been seldom done in a systematic way. Fortunately that picture is changing as post-occupancy evaluation becomes more action-orientated and more clearly based on addressing clients’ and architects’ needs. In the UK there are two formal schemes underway which have been applied to the Higher Education (HE sector and to academic libraries – an external one led by the construction industry (PROBE or Postoccupancy Review of Buildings and their Engineering – which has undertaken over 100 studies to date and the other, internal to the HE sector itself (led by the Higher Education Design Quality Forum. These are complimented by two 'softer’, qualitative forms of evaluation demonstrated by the efforts of (a the library profession itself, led by SCONUL for academic libraries and by the Library Association for public libraries, and (b the architecture and building related professions.

  19. Relationship between Architectural Outer Shape and Function of Buildings: Behaviour Study on Building Constructed in China

    Directory of Open Access Journals (Sweden)

    ISSA. A.M. Al-Kahtani

    2008-01-01

    Full Text Available The present study attempted to investigate the behaviour of some projects designed and constructed in China during the last decades from an architectural view point and their compatibility with respect to the relationship between the outer shape and function of the building. The study includes different groups of architectural works including; Culture architecture, Education architecture, Office architecture and Hotel architecture surveying about 60 projects divided into four groups. Four types of relationship were adopted depending on score given to each building. The statistical tools also used to classify and specify accurately the relationship between the buildings and the groups. The study concluded that most of the buildings give good relationship and express the function of the building in addition to aesthetics considerations but the educational architecture give the best representation.

  20. Building Enclosure Hygrothermal Performance Study, Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    Karagiozis, A.N.

    2002-08-08

    The moisture performance of three different classes of wall systems has been investigated in the context of the preliminary hygrothermal analysis of walls in Seattle. The results reported in this phase specifically address the moisture performance of walls designed with loads that have some unintentional water penetration. The results have been developed in a manner to present the relative performance of the walls in the same climate with similar water penetration effects. The analysis was performed with the best available input data. Several limitations should be recognized within the context of this study. Results showed that selection of wooden sheathing boards on interior vapor-tight assemblies does not significantly influence the performance of stucco-clad walls. A larger effect was observed when the interior vapor control is made vapor open. When continuous cavity ventilation is employed, the effect of the selection of the type of sheathing board on the hygrothermal performance of the wall was found to be negligible. When comparing oriented strand board sheathing performance against the performance of exterior grade gypsum, the differences are very significant in terms of the amount of moisture content present in the walls. Moisture content alone does not indicate their respective durability as durability is directly related to the combination of relative humidity and temperature, mechanical, chemical, and biological properties of the substrates. This study did not investigate the durability performance of either sheathing. In terms of interior vapor control, inhabitant behavior must be considered during the wall hygrothermal design stage. If interior relative humidity is maintained below 60%, then a latex primer and paint may perform better than the use of PVA or even a polyethylene sheet. When the interior environment is maintained at a higher relative humidity, then stricter vapor control is needed. Multilayered building paper was experimentally shown to

  1. Nearly zero energy buildings and proliferation of microorganisms a current issue for highly insulated and airtight building envelopes

    CERN Document Server

    Di Giuseppe, Elisa

    2013-01-01

    This book provides a concise review of the thermo-physical phenomena which regulate heat and moisture transportation in Nearly Zero Energy Buildings envelopes, and their relationship with the growth of biological organisms. It describes the main microorganisms proliferating on contemporary building elements and within buildings. It also states the consequences of biological growth on durability, aesthetics and human health; and provides the main methods for the analytical and experimental evaluation of proliferation. Finally, through the review of recent developments, remedial actions to count

  2. II. Model building: an electrical theory of control of growth and development in animals, prompted by studies of exogenous magnetic field effects (paper I), and evidence of DNA current conduction, in vitro.

    Science.gov (United States)

    Elson, Edward

    2009-01-01

    A theory of control of cellular proliferation and differentiation in the early development of metazoan systems, postulating a system of electrical controls "parallel" to the processes of molecular biochemistry, is presented. It is argued that the processes of molecular biochemistry alone cannot explain how a developing organism defies a stochastic universe. The demonstration of current flow (charge transfer) along the long axis of DNA through the base-pairs (the "pi-way) in vitro raises the question of whether nature may employ such current flows for biological purposes. Such currents might be too small to be accessible to direct measurement in vivo but conduction has been measured in vitro, and the methods might well be extended to living systems. This has not been done because there is no reasonable model which could stimulate experimentation. We suggest several related, but detachable or independent, models for the biological utility of charge transfer, whose scope admittedly outruns current concepts of thinking about organization, growth, and development in eukaryotic, metazoan systems. The ideas are related to explanations proposed to explain the effects demonstrated on tumors and normal tissues described in Article I (this issue). Microscopic and mesoscopic potential fields and currents are well known at sub-cellular, cellular, and organ systems levels. Not only are such phenomena associated with internal cellular membranes in bioenergetics and information flow, but remarkable long-range fields over tissue interfaces and organs appear to play a role in embryonic development (Nuccitelli, 1992 ). The origin of the fields remains unclear and is the subject of active investigation. We are proposing that similar processes could play a vital role at a "sub-microscopic level," at the level of the chromosomes themselves, and could play a role in organizing and directing fundamental processes of growth and development, in parallel with the more discernible fields and

  3. Suitable scheme study of Chinese Building Energy Efficiency CDM Projects

    Science.gov (United States)

    Huang, Beijia; Yang, Haizhen; Wang, Shaoping; Wang, Feng

    2010-11-01

    China has great potential to develop Building Energy Efficiency Clean Development Mechanism (BEE CDM) projects, although have many challenges. Our results show that large-scale public buildings and urban residential buildings have relatively high BEE CDM potential, when comparing their characteristics to the CDM project requirements. The building enclosure, illumination energy conservation, air condition energy saving, solar thermal, and solar photovoltaic technology have relatively high application potential while considering the energy saving potential and marginal emission reduction cost. Case study of large-scale buildings shows that technology integration of building enclosure, illumination energy conservation, air condition energy saving, solar thermal can reduce required building number to 130 in order to meet the 1×105 tCO2 e/a reduction criteria. Some suggestions are also given in this paper.

  4. Green building environmental control: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Gottfried, D.A.; Schoichet, E.A. [Gottfried Technology, Inc., San Francisco, CA (United States); Hart, M. [McParlane and Associates, Inc., San Diego, CA (United States)

    1997-02-01

    This article presents an overview of the City of San Diego`s Ridgehaven Green Building Demonstration Project. While there is no formal definition of green building, the term implies a structure that is friendlier to its occupants and to the environment and is more resource efficient. What this meant for this project will be brought out in the following discussion. The purpose of this article is to show the numerous successes at Ridgehaven, to provide others with insights on how to approach a green renovation project, and to present some of the difficulties that can be encountered.

  5. Architectural design and physical activity: an observational study of staircase and elevator use in different buildings.

    Science.gov (United States)

    Bassett, David R; Browning, Ray; Conger, Scott A; Wolff, Dana L; Flynn, Jennifer I

    2013-05-01

    The indoor built environment has the potential to influence levels of physical activity. However, the extent to which architectural design in commercial buildings can influence the percentage of people choosing to use the stairs versus elevators is unknown. The purpose of this study was to determine if buildings with centrally located, accessible, and aesthetically pleasing staircases result in a greater percentage of people taking the stairs. Direct observations of stair and elevator use were conducted in 3 buildings on a university campus. One of the buildings had a bank of 4 centrally located elevators and a fire escape stairwell behind a steel door. The other 2 buildings had centrally located staircases and out-of-the-way elevators. The percentage of people who ascended the stairs was 8.1% in the elevator-centric building, compared with 72.8% and 81.1% in the 2 stair-centric buildings (P < .001). In addition, the percentage of people who descended the stairs was 10.8% in the first building, compared with 89.5% and 93.7% in the stair-centric buildings (P < .001). The results of the current study suggest that if buildings are constructed with centrally located, accessible, and aesthetically pleasing staircases, a greater percentage of people will choose to take the stairs.

  6. Maintenance of Heritage Building: A Case Study from Ipoh, Malaysia

    Directory of Open Access Journals (Sweden)

    Tan Seong Yeow

    2016-01-01

    Full Text Available Heritage buildings represent the tangible cultural heritage of a community. However, many of the heritage buildings have being left neglected. Ipoh as a city rich in heritage, has many dilapidated heritage buildings which are experiencing a resurging interest. However, the problems faced by many owners are the lack of technical information of such buildings, leading to premature abandonment and demolition. Therefore, the objectives of this study are to determine the types and extent of defects present in the building studied. To achieve these objectives, a case study of a century old heritage property in Ipoh, Perak was conducted. The study aims to provide reference to owners and those responsible for the conservation of heritage buildings with similar conditions to identify and prioritize critical defects in relation to the building life span to determine its condition. The findings determined the probable causes of defects such as settlement and façade cracks, which are over 30 years old, were attributed to leaking plumbing pipes, rainwater ingress and the construction of an adjacent 20 story apartment building. The major issues to address were stabilizing the foundation through cement grouting, reinforcing the existing structural systems and roof systems as well as arresting the decay of timber floor structure. In conclusion, major maintenance guidelines are need to address structural issues and weather tightness of the building envelope, especially its roof and drainage systems.

  7. Should Public Buildings Be Exclusive? A Study of Selected Institutional Buildings in Minna, Niger State.

    Directory of Open Access Journals (Sweden)

    Oyetola, S.A

    2015-03-01

    Full Text Available Some individuals are born with a deformity also known as disability whereas others may become permanently or temporarily disabled over the course of their lives. Buildings should not be made to judge who comes in and goes out of its spaces. A good design must be accessible to all individuals, especially when discussing public buildings. An educational building is a public building and “education for all” is a common dictum that refers to all individuals irrespective of current status. Disabled individuals especially those in wheelchairs have special needs and requirements however, most Institutional buildings do not portray this equality with regards to their design; instead these designs ostracize individuals with disabilities. A survey was carried out on the existing special educational facility and forty four (44 randomly selected institutions of learning located in Minna, the capital of Niger State. They were further categorised based on funding; Federal, state or privately funded institutions. The survey showed that individuals with physical disabilities in Minna were not attending the special educational school and even if they were, facilities were not put in place to accommodate them also, despite the support by the Nigerian government on the equalisation of opportunities for people with disabilities, the public educational system have yet to factor in or retrofit designs to suit disabled individuals in their designs. This paper further highlighted these abnormalities in design and probable causes and concluded by recommending possible solutions.

  8. Study on Building Lifecycle Information Management Platform Based on BIM

    Directory of Open Access Journals (Sweden)

    Wang-Jian Ping

    2014-01-01

    Full Text Available Building Information Modeling (BIM and building lifecycle management (BLM, proposed for the realization of building lifecycle information exchange and sharing, play a crucial role in the research and development fields of construction information integration and interoperability. This study, from an information technology point of view, based on BLM and BIM technology and Industry Foundation Classes (IFC standard, proposes the concept, frame and realization method of Building Lifecycle Management Platform (BLMP. This BLMP presents a practical and effective way to realize information creating, exchange, sharing and integration management of all participants of the construction project.

  9. Energy Efficiency of Higher Education Buildings: A Case Study

    Science.gov (United States)

    Soares, Nelson; Pereira, Luísa Dias; Ferreira, João; Conceição, Pedro; da Silva, Patrícia Pereira

    2015-01-01

    Purpose: This paper aims to propose an energy efficiency plan (with technical and behavioural improvement measures) for a Portuguese higher education building--the Teaching Building of the Faculty of Economics of the University of Coimbra (FEUC). Design/methodology/approach: The study was developed in the context of both the "Green…

  10. Energy Efficiency of Higher Education Buildings: A Case Study

    Science.gov (United States)

    Soares, Nelson; Pereira, Luísa Dias; Ferreira, João; Conceição, Pedro; da Silva, Patrícia Pereira

    2015-01-01

    Purpose: This paper aims to propose an energy efficiency plan (with technical and behavioural improvement measures) for a Portuguese higher education building--the Teaching Building of the Faculty of Economics of the University of Coimbra (FEUC). Design/methodology/approach: The study was developed in the context of both the "Green…

  11. Wind-resistant studies on tall buildings and structures

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    This paper introduces some aspects of wind-resistant studies of our research team on tall buildings and structures. Wind tunnel tests were carried out on 27 typical tall building models by using wind pressure scanning and HFFB techniques. The characteristics of wind pressures and forces acting on these buildings were analyzed. Some results have been adopted in a Shanghai code for structural design of steel tall buildings. Interference effects on wind forces and wind pressures among two and three tall buildings were experimentally investigated with about 10000 testing conditions. Regression analyses of the interference factors under different parameter conditions were made and the main regression formulas are presented. Theoretical study on equivalent static wind loads of tall buildings and structures are then introduced. Especially,a new concept of "mode coupling factor" and a modified SRSS method for wind response and equivalent static wind load of complicated tall buildings and structures with consideration of multi mode contributions and their coupling effects are presented. Finally,practical applications of wind-resistant studies on tall building and structures,taking the Guangzhou New TV Tower as an example,are presented.

  12. Review of Current Data Exchange Practices: Providing Descriptive Data to Assist with Building Operations Decisions

    Energy Technology Data Exchange (ETDEWEB)

    Livingood, W.; Stein, J.; Considine, T.; Sloup, C.

    2011-05-01

    Retailers who participate in the U.S. Department of Energy Commercial Building Energy Alliances (CBEA) identified the need to enhance communication standards. The means are available to collect massive numbers of buildings operational data, but CBEA members have difficulty transforming the data into usable information and energy-saving actions. Implementing algorithms for automated fault detection and diagnostics and linking building operational data to computerized maintenance management systems are important steps in the right direction, but have limited scalability for large building portfolios because the algorithms must be configured for each building.

  13. Energy Efficiency Potential in Existing Commercial Buildings: Review of Selected Recent Studies

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, David B.

    2009-04-03

    This report reviews six recent studies (from 2002 through 2006) by states and utilities to assess the energy saving potential in existing commercial buildings. The studies cover all or portions of California, Connecticut, Vermont, Colorado, Illinois, and the Pacific Northwest. The studies clearly reveal that lighting remains the single largest and most cost effective end use that can be reduced to save energy. Overall the study indicated that with existing technologies and costs, a reasonable range of economic savings potential in existing commercial buildings is between 10 and 20 percent of current energy use. While not a focus of the study, an additional conclusion is that implementation of commercial building monitoring and controls would also play an important role in the nation’s efforts to improve energy efficiency of existing buildings.

  14. Implementation Framework of Green Building for Malaysian Government Building: KKR2 Study

    Directory of Open Access Journals (Sweden)

    Sharif Shiela

    2016-01-01

    Full Text Available The purpose of this study is to develop the Implementation Framework of Green Building for Government Project. Implementation of Green Building Design is very important in Malaysia to conduct and execute green government project. The research intended to answer the questions about the factors involve in the development of the framework, what is the significant relationships exists between the factors involve in the Implementation Framework and whether there is significant relationship exists between the factors in implementation framework. A total 30 respondent selected between multilevel of project team KKR2 including engineers, assistants engineers, technical assistant, stake holders, contractors and consultants. In conclusion the study answered pertaining questions regarding the factors involve in development of Implementation Framework of Green Building through quantitative research and hypothesis testing.

  15. Study of longshore current equations for currents in Visakhapatnam beach

    Digital Repository Service at National Institute of Oceanography (India)

    Chandramohan, P.; Rao, T.V.N.

    Longshore currents were measured along the Visakhapatnam Beach, Andhra Pradesh, India at weekly intervals from March 1978 to March 1979. Visual observations on breaker characteristics were also made during this period. Using modified Longuet...

  16. A Study to Compare the Cost of Operation and Maintenance in Green Building Index (GBI and Non-Green Building Index (Non-GBI Rated Building in Malaysia

    Directory of Open Access Journals (Sweden)

    Ping Lee Zheng

    2016-01-01

    Full Text Available Urges for sustainable development had pushed the government and professional bodies to respond and react by implementing regulations where possible to direct development in that manner. However, the outcome in most financial conferences and dialogues on sustainable buildings flagged on high construction and maintenance cost. Thus, this study is conducted to collect and analyze actual building operation and maintenance cost between GBI and Non-GBI rated buildings in Malaysia which are more than 2 years fully operated buildings. There are two categories of selected buildings which are residential and non-residential type of building. Each category of the building consists of similar building’s characteristic such as geographic location, mode of operation, building heights, total numbers of floors and units. The scope of building’s maintenance for this study is mainly on wear and tear of the wall painting, electrical light fittings, ceiling panels, roofing system and mechanical services like water pump system are recorded for their replacement frequency of service and the cost involved within a consistent period of 12 months operation at cost percentage saving of 78.9% and 40.4% for residential and non-residential buildings respectively compare against Non-GBI rated buildings. Electricity consumption for GBI rated buildings are lower than Non-GBI rated buildings which recorded at the cost variance of 23.8% and 6.3% and water consumption at 35.9% and 44.0% for the above mentioned two main categories of selected case study buildings. Results from this study conclude major savings on residential buildings category in term of maintenance cost and electricity consumption for GBI rated buildings. Whereby, non-residential category of buildings, GBI rated building had been proven to obtain significant savings in terms of maintenance cost and water consumption.

  17. Studies of Current Dependent Effects at ANKA

    CERN Document Server

    Müller, A S; Huttel, E; Pérez, F; Pont, M; Zimmermann, Frank

    2004-01-01

    The ANKA electron storage ring is operated at energies between 0.5 and 2.5 GeV. A major requirement for a synchrotron light source, such as ANKA, is to achieve a high beam current. A multitude of mostly impedance related effects depend on either bunch or total beam current. This paper gives an overview over the various beam studies performed at ANKA in this context, specifically the observation of current dependent detuning, the determination of the bunch length change with current from a measurement of the ratio between coherent and incoherent synchrotron tune and an assessment of the effective longitudinal loss factor from the current dependent horizontal closed orbit distortion.

  18. A Review of Current Researches on Blast Load Effects on Building Structures in China

    Institute of Scientific and Technical Information of China (English)

    LI Zhongxian; DU Hao; BAO Chunxiao

    2006-01-01

    The damages of building structures subjected to multifarious explosions cause huge losses of lives and property.It is the reason why the blast resistance and explosion protection of building structures become an important research topic in the civil engineering field all over the world.This paper provides an overview of the research work in China on blast loads effect on building structures.It includes modeling blast shock wave propagation and their effects,the dynamic responses of various building structures under blast loads and the measures to strengthen the building structures against blast loads.The paper also discusses the achievements and further work that needs be done for a better understanding of the blast loads' effects on building structures,and for deriving effective and economic techniques to design new or to strengthen existing structures.

  19. Study on Fault Current of DFIG during Slight Fault Condition

    Directory of Open Access Journals (Sweden)

    Xiangping Kong

    2013-04-01

    Full Text Available In order to ensure the safety of DFIG when severe fault happens, crowbar protection is adopted. But during slight fault condition, the crowbar protection will not trip, and the DFIG is still excited by AC-DC-AC converter. In this condition, operation characteristics of the converter have large influence on the fault current characteristics of DFIG. By theoretical analysis and digital simulation, the fault current characteristics of DFIG during slight voltage dips are studied. And the influence of controller parameters of converter on the fault current characteristics is analyzed emphatically. It builds a basis for the construction of relay protection which is suitable for the power gird with accession of DFIG.

  20. Calorimetric methods for the study of fungi on building materials

    OpenAIRE

    Li, Yujing

    2004-01-01

    The aim of this project is to study the fungal growth habits on building materials as a function of humidity, temperature and other environmental parameters. The method of calorimetry is used as a way to quantify fungal activity on building materials. Calorimetry is a general, but sensitive method that can continuously monitor biological processes as a function of environmental conditions. In this report, three different studies are presented: (1) A calorespirometric device was developed and ...

  1. Results of a market studies on Green Building. More than a niche market; Ergebnisse einer Marktstudie zum Thema Green Building. Mauerbluemchendasein abgelegt

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Michael (Drees and Sommer Advanced Building Technologies GmbH, Stuttgart)

    2009-11-15

    Green Building has become a widely discussed issue, not least as a result of the current economic crisis and the effects of global warming. In empirical studies, the opinions and expectations of the construction and real estate industry on this issue were investigated. It was found that green buildings are no longer a niche product; instead, they have become a fully fledged business option. (orig.)

  2. Vulnerability Study of Public Buildings Subjected to Earthquake Event

    Directory of Open Access Journals (Sweden)

    Rozaina Ismail

    2017-01-01

    Full Text Available The present article addresses on the earthquake study due to performance of critical frame reinforced concrete building. The buildings are analysed using Finite Element Modeling (FEM under different types of analyses including Free Vibration Analysis (FVA, and Time History Analysis (THA with varies earthquake intensities. The performances of the structure are shown by the yield point at beam-column connections where the internal forces at beam elements exceed the design capacity of the beams. The performance of critical frame reinforced concrete building when subjected to earthquake motion (Near source: Acheh was addressed. The level of the damage state (Minor, Moderate, Major, Collapse level has been defined as well. As a result, a greater damage index means that the members yield earlier and the plastic rotation is larger and vice versa. In general, there are no significant damage occurred to the structure. However, some non-structural elements of the building are expected to experience minor damages. These two buildings has no structural response to the earthquake because both Damage Index are less than 1.000. The study indicates that more than 50% of the buildings produced dynamic amplification factors of slightly more than one indicating not much of a dynamic response to the buildings.

  3. European database on indoor air pollution sources in buildings: Current status of database structure and software

    NARCIS (Netherlands)

    Molina, J.L.; Clausen, G.H.; Saarela, K.; Plokker, W.; Bluyssen, P.M.; Bishop, W.; Oliveira Fernandes, E. de

    1996-01-01

    the European Joule II Project European Data Base for Indoor Air Pollution Sources in Buildings. The aim of the project is to produce a tool which would be used by designers to take into account the actual pollution of the air from the building elements and ventilation and air conditioning system com

  4. European database on indoor air pollution sources in buildings: Current status of database structure and software

    NARCIS (Netherlands)

    Molina, J.L.; Clausen, G.H.; Saarela, K.; Plokker, W.; Bluyssen, P.M.; Bishop, W.; Oliveira Fernandes, E. de

    1996-01-01

    the European Joule II Project European Data Base for Indoor Air Pollution Sources in Buildings. The aim of the project is to produce a tool which would be used by designers to take into account the actual pollution of the air from the building elements and ventilation and air conditioning system

  5. Post-Occupancy Evaluation of UK Library Building Projects: Some Examples of Current Activity

    OpenAIRE

    Suzanne Enright

    2002-01-01

    Post-occupancy evaluations of buildings ask questions and provide answers on how buildings actually work in technical, social and management terms for the end-users1. They can have a significant impact on creating change in terms of improving use of any building. Post-occupancy evaluations can show what works, and what does not – yet they are not common and apparently have been seldom done in a systematic way. Fortunately that picture is changing as post-occupancy evaluation becomes more acti...

  6. Building America Case Study: Boiler Control Replacement for Hydronically Heated Multifamily Buildings, Cambridge, Massachusetts (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-11-01

    The ARIES Collaborative, a U.S. Department of Energy Building America research team, partnered with NeighborWorks America affiliate Homeowners' Rehab Inc. (HRI) of Cambridge, Massachusetts, to study improvements to the central hydronic heating system in one of the nonprofit's housing developments. The heating controls in the three-building, 42-unit Columbia Cambridge Alliance for Spanish Tenants housing development were upgraded. Fuel use in the development was excessive compared to similar properties. A poorly insulated thermal envelope contributed to high energy bills, but adding wall insulation was not cost-effective or practical. The more cost-effective option was improving heating system efficiency. Efficient operation of the heating system faced several obstacles, including inflexible boiler controls and failed thermostatic radiator valves. Boiler controls were replaced with systems that offer temperature setbacks and one that controls heat based on apartment temperature in addition to outdoor temperature. Utility bill analysis shows that post-retrofit weather-normalized heating energy use was reduced by 10%-31% (average of 19%). Indoor temperature cutoff reduced boiler runtime (and therefore heating fuel consumption) by 28% in the one building in which it was implemented. Nearly all savings were obtained during night which had a lower indoor temperature cut off (68 degrees F) than day (73 degrees F). This implies that the outdoor reset curve was appropriately adjusted for this building for daytime operation. Nighttime setback of heating system supply water temperature had no discernable impact on boiler runtime or gas bills.

  7. An optimization study for viscous dampers between adjacent buildings

    Science.gov (United States)

    Kandemir-Mazanoglu, Elif Cagda; Mazanoglu, Kemal

    2017-05-01

    This paper investigates optimum viscous damper capacity and number for prevention of one-sided structural pounding between two adjacent buildings under earthquake motion. The buildings assumed as shear-type structures are modeled by using lumped mass-stiffness technique. Impact forces due to pounding is simulated by nonlinear elastic spring approximation called Hertz model. A parametric study is conducted by varying storey number and stiffness of buildings in addition to the capacity of the viscous dampers. Pounding force and supplemental damping ratio for each case are presented based upon newly defined nondimensional natural frequency parameter ratio. An optimization procedure for determination of viscous damper capacity is developed based on modified supplemental damping ratio equation. Results are compared with each other to clarify the effect of variation in building parameters on pounding forces and viscous damper capacity.

  8. Studies on wind environment around high buildings in urban areas

    Institute of Scientific and Technical Information of China (English)

    LIU; Huizhi; JIANG; Yujun; LIANG; Bin; ZHU; Fengrong; ZHAN

    2005-01-01

    High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.

  9. Radioactivity of natural and artificial building materials - a comparative study.

    Science.gov (United States)

    Szabó, Zs; Völgyesi, P; Nagy, H É; Szabó, Cs; Kis, Z; Csorba, O

    2013-04-01

    Building materials and their additives contain radioactive isotopes, which can increase both external and internal radioactive exposures of humans. In this study Hungarian natural (adobe) and artificial (brick, concrete, coal slag, coal slag concrete and gas silicate) building materials were examined. We qualified 40 samples based on their radium equivalent, activity concentration, external hazard and internal hazard indices and the determined threshold values of these parameters. Absorbed dose rate and annual effective dose for inhabitants living in buildings made of these building materials were also evaluated. The calculations are based on (226)Ra, (232)Th and (40)K activity concentrations determined by gamma-ray spectrometry. Measured radionuclide concentrations and hence, calculated indices and doses of artificial building materials show a rather disparate distribution compared to adobes. The studied coal slag samples among the artificial building materials have elevated (226)Ra content. Natural, i.e. adobe and also brick samples contain higher amount of (40)K compared to other artificial building materials. Correlation coefficients among radionuclide concentrations are consistent with the values in the literature and connected to the natural geochemical behavior of U, Th and K elements. Seven samples (coal slag and coal slag concrete) exceed any of the threshold values of the calculated hazard indices, however only three of them are considered to be risky to use according to the fact that the building material was used in bulk amount or in restricted usage. It is shown, that using different indices can lead to different conclusions; hence we recommend considering more of the indices at the same time when building materials are studied. Additionally, adding two times their statistical uncertainties to their values before comparing to thresholds should be considered for providing a more conservative qualification. We have defined radon hazard portion to point

  10. POSITIONAL ACCURACY ASSESSMENT OF THE OPENSTREETMAP BUILDINGS LAYER THROUGH AUTOMATIC HOMOLOGOUS PAIRS DETECTION: THE METHOD AND A CASE STUDY

    OpenAIRE

    M. A. Brovelli; M. Minghini; M. E. Molinari; Zamboni, G.

    2016-01-01

    OpenStreetMap (OSM) is currently the largest openly licensed collection of geospatial data. Being OSM increasingly exploited in a variety of applications, research has placed great attention on the assessment of its quality. This work focuses on assessing the quality of OSM buildings. While most of the studies available in literature are limited to the evaluation of OSM building completeness, this work proposes an original approach to assess the positional accuracy of OSM buildings b...

  11. Multiscale Study of Currents Affected by Topography

    Science.gov (United States)

    2015-09-30

    boundary layers to influence the ambient larger-scale flow. We have studied these issues through ocean model simulations, adjoint sensitivity...circulation be monitored from pressure gauges, temperature sensors, current meters, or other measurements near the feature? • The influence of the

  12. 绿色建筑当前的发展与展望%CURRENT DEVELOPMENT AND OUTLOOK OF GREEN BUILDING

    Institute of Scientific and Technical Information of China (English)

    徐至钧; 赵尧钟

    2012-01-01

    Based on the concept and current development of green building, significance of green building design is introduced, design content and characteristics of low-carbon energy-saving green residential building are described in details. Domestic winning green building projects of recent two years are listed. Wide and bright development outlook of green building are discussed on the aspects of existing problems and development trend of green building.%从绿色建筑的概念与当前发展入手,介绍绿色建筑设计的内涵,详细介绍了绿色低碳节能住宅设计的内容和特点,列举了我国近两年评选的绿色建筑项目,最后从绿色建筑存在问题和发展趋势论证了绿色建筑广阔的发展前景.

  13. A Correlational Study of Building Principal Emotional Intelligence and the Connection to Academic Achievement

    Science.gov (United States)

    Fish, James

    2012-01-01

    While student achievement is only one indicator of a building principal's effectiveness, it is widely considered to be one of the most important. This is especially true in regard to the current climate of accountability surrounding education. Multiple studies have yielded results concerning the behaviors and characteristics of building…

  14. Intelligent Facades in Buildings Facades of local Office Buildings - Case Study

    Directory of Open Access Journals (Sweden)

    Al-Qaraghuli Anwar Subhi

    2016-01-01

    Full Text Available In order to meet the functional performance and requirements on the environmental, ecological, social and aesthetical aspects, it became a necessity to develop another options of building that would be more efficient in the provision of those requirements, so a new generation have appeared called “Smart Buildings” or “Intelligent Buildings” with their sophisticated parts and various details, one of those essential parts is the “Intelligent Façade” for it’s being the essential and primary defensive line for the building against the environmental and climatic variations.This research focused on presenting the most clearly and comprehensive perception of the intelligent façades, in a manner that serves the ability of the designer to apply them in his designs or while developing an existing façades in local (Iraqi office buildings.To achieve such goal, it has been a necessity to adopt a descriptive and analytical Method for the previous knowledge and take a sequential researching steps, the first step was to build a comprehensive theoretical framework by defining the intelligent façade. Down to abstracting three main vocabularies of the theoretical framework represented by: integrated intelligent façade design, intelligent façade techniques, and effective response.The next research steps focused on applying the vocabularies of the theoretical framework on the elected local office buildings that have been adopted the matter of intelligent façades in one of their forms, and then analyze/discuss the results of the applicable study, to be able to draw the final conclusions, and by this the research presented a determined recommendations.

  15. The ENIQ pilot study: current status

    Energy Technology Data Exchange (ETDEWEB)

    Lemaitre, P.; Eriksen, B.; Crutzen, S. [European Commission, DG Joint Research Centre, Petten (Netherlands); Hansch, M. [Preussische Elektrizitaets-AG (Preussenelektra), Hannover (Germany); Whittle, J. [AEA Technology, Warrington (United Kingdom)

    1998-11-01

    A pilot study is currently being carried out by ENIQ (European Network for Inspection Qualification) in order to explore the issues involved in inspection qualification applied along the general principles of the European methodology. The components selected for the pilot study are austenitic pipe to pipe and pipe to elbows welds typical of those in BWR recirculation loops. A range of defect parameters has been defined. A suitable inspection procedure designed to find the designated defects will be applied to geometrically representative test pieces. The procedure/equipment will be qualified through open trials and technical justification. The personnel qualification will be done in a blind way. Once all features of the inspection system will have been qualified an in-service inspection will be simulated in order to test the feasibility of the qualification approach followed. In this paper the current status of this pilot study is discussed. (orig.)

  16. [Current registry studies of acute ischemic stroke].

    Science.gov (United States)

    Veltkamp, R; Jüttler, E; Pfefferkorn, T; Purrucker, J; Ringleb, P

    2012-10-01

    Study registries offer the opportunity to evaluate the effects of new therapies or to observe the consequences of new treatments in clinical practice. The SITS-MOST registry confirmed the validity of findings from randomized trials on intravenous thrombolysis concerning safety and efficacy in the clinical routine. Current study registries concerning new interventional thrombectomy techniques suggest a high recanalization rate; however, the clinical benefit can only be evaluated in randomized, controlled trials. Similarly, the experiences of the BASICS registry on basilar artery occlusion have led to the initiation of a controlled trial. The benefit of hemicraniectomy in malignant middle cerebral artery infarction has been demonstrated by the pooled analysis of three randomized trials. Numerous relevant aspects are currently documented in the DESTINY-R registry. Finally, the recently started RASUNOA registry examines diagnostic and therapeutic aspects of ischemic and hemorrhagic stroke occurring during therapy with new oral anticoagulants.

  17. Using DOE Commercial Reference Buildings for Simulation Studies: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Field, K.; Deru, M.; Studer, D.

    2010-08-01

    The U.S. Department of Energy developed 256 EnergyPlus models for use in studies that aim to characterize about 70% of the U.S. commercial building stock. Sixteen building types - including restaurants, health care, schools, offices, supermarkets, retail, lodging, and warehouses - are modeled across 16 cities to represent the diversity of U.S. climate zones. Weighting factors have been developed to combine the models in proportions similar to those of the McGraw-Hill Construction Projects Starts Database for 2003-2007. This paper reviews the development and contents of these models and their applications in simulation studies.

  18. Building Integrated Photovoltaics: A Concise Description of the Current State of the Art and Possible Research Pathways

    Directory of Open Access Journals (Sweden)

    Bjørn Petter Jelle

    2015-12-01

    Full Text Available Building integrated photovoltaics (BIPV offer an aesthetical, economical and technical solution to integrate solar cells harvesting solar radiation to produce electricity within the climate envelopes of buildings. Photovoltaic (PV cells may be mounted above or onto the existing or traditional roofing or wall systems. However, BIPV systems replace the outer building envelope skin, i.e., the climate screen, hence serving simultanously as both a climate screen and a power source generating electricity. Thus, BIPV may provide savings in materials and labor, in addition to reducing the electricity costs. Hence, for the BIPV products, in addition to specific requirements put on the solar cell technology, it is of major importance to have satisfactory or strict requirements of rain tightness and durability, where building physical issues like e.g., heat and moisture transport in the building envelope also have to be considered and accounted for. This work, from both a technological and scientific point of view, summarizes briefly the current state-of-the-art of BIPV, including both BIPV foil, tiles, modules and solar cell glazing products, and addresses possible research pathways for BIPV in the years to come.

  19. Parametric study on the performance of green residential buildings in China

    Directory of Open Access Journals (Sweden)

    Xi Wang

    2015-03-01

    Full Text Available The parametric study of the indoor environment of green buildings focuses on the quantitative and qualitative improvement of residential building construction in China and the achievement of indoor thermal comfort at a low level of energy use. This study examines the effect of the adaptive thermal comfort of indoor environment control in hot summer and cold winter (HSCW zones. This work is based on a field study of the regional thermal assessment of two typical cases, the results of which are compared with simulated results of various scenarios of “energy efficiency” strategy and “healthy housing” environmental control. First, the simulated results show that the adaptive thermal comfort of indoor environment control is actually balanced in terms of occupancy, comfort, and energy efficiency. Second, adaptive thermal comfort control can save more energy for heating or cooling than other current healthy housing environmental controls in China׳s HSCW zone. Moreover, a large proportion of energy use is based on the subjective thermal comfort demand of occupants in any building type. Third, the building shape coefficient cannot dominate energy savings. The ratio of the superficial area of a building to the actual indoor floor area has a significant positive correlation with and affects the efficiency of building thermal performance.

  20. The effect of building façade on natural lighting (Case study: Building of phinisi tower UNM)

    Science.gov (United States)

    Jamala, Nurul

    2017-04-01

    Utilization of natural lighting is one factor to lower the energy consumption of a building. Model building facade effect on natural light sources that can be absorbed into the building. UNM Phinisi Tower Building is a metaphor for the display of boats phinisi using Hiperbolic paraboloid facade which is futuristic sophistication of the application of science and technology, so that this object that is the focus of research on the effects on the building facade natural lighting. A quantitative research methods using Autodesk Echotech program to determine the value of the building into the natural lighting illuminance, either by using the facade and do not. The aim of research is to determine the percentage utilization of natural light into the building using a building facade. The study concluded the decline percentage in the value of the illuminance after the building using the building facade is 49% -74% and a mean value of 60.3%, so it can be concluded that the building facade effects on the natural lighting.

  1. Experimental study of passive cooling of building facade using phase change materials to increase thermal comfort in buildings in hot humid areas

    Directory of Open Access Journals (Sweden)

    A. A. Madhumathi, B. M.C. Sundarraja

    2012-01-01

    Full Text Available Storage of cooler night temperatures using Phase Change Material (PCM energy storage technique, for cooling of ambient air during hot day times can be an alternate of current cooling techniques in building sector. This work presents the results of an experimental set-up to test energy saving potential of phase change materials with typical construction materials in building facade in Hot-Humid Climatic Regions in real conditions. The main objective of this research is to demonstrate experimentally that it is possible to improve the thermal comfort and reduce the energy consumption of a building without substantial increase in the weight of the construction materials with the inclusion of PCM. This research was conducted to study and evaluate the performance of the existing materials integrated with Organic PCM Polyethylene glycol (PEG E600. This research suggested that the heat gain is significantly reduced when the PCM is incorporated into the brick (conventional building material.

  2. A study of model bivalve siphonal currents

    Science.gov (United States)

    Monismith, Stephen G.; Koseff, Jeffrey R.; Thompson, Janet K.; O'Riordan, Catherine A.; Nepf, Heidi M.

    1990-01-01

    We carried out experiments studying the hydrodynamics of bivalve siphonal currents in a laboratory flume. Rather than use living animals, we devised a simple, model siphon pair connected to a pump. Fluorescence-based flow visualization was used to characterize siphon-jet flows for several geometric configurations and flow speeds. These measurements show that the boundary-layer velocity profile, siphon height, siphon pair orientation, and size of siphon structure all affect the vertical distribution of the excurrent flow downstream of the siphon pair and the fraction of excurrent that is refiltered. The observed flows may effect both the clearance rate of an entire population of siphonate bivalves as well as the efficiency of feeding of any individual. Our results imply that field conditions are properly represented in laboratory flume studies of phytoplankton biomass losses to benthic bivalves when the shear velocity and bottom roughness are matched to values found in the field. Numerical models of feeding by a bivalve population should include an effective sink distribution which is created by the combined incurrent-excurrent flow field. Near-bed flows need to be accounted for to properly represent these benthic-pelagic exchanges. We also present velocity measurements made with a laser-Doppler anemometer (LDA) for a single configuration (siphons flush with bed, inlet downstream) that show that the siphonal currents have a significant local effect on the properties of a turbulent boundary layer.

  3. Summary of Building Protection Factor Studies for External Exposure to Ionizing Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, Jave [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Nasstrom, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Homann, Steve [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pobanz, Brenda [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-02-17

    Radiation dose assessments are used to help inform decisions to minimize health risks in the event of an atmospheric release of radioactivity including, for example, from a Radiological Dispersal Device, an Improvised Nuclear Device detonation, or a Nuclear Power Plant accident. During these incidents, radiation dose assessments for both indoor and outdoor populations are needed to make informed decisions. These dose assessments inform emergency plans and decisions including, for example, identifying areas in which people should be sheltered and determining when controlled population evacuations should be made. US dose assessment methodologies allow consideration of the protection, and therefore dose reduction, that buildings provide their occupants. However, these methodologies require an understanding of the protection provided by various building types that is currently lacking. To help address this need, Lawrence Livermore National Laboratory, in cooperation with Sandia National Laboratories and the Nuclear Regulatory Commission, was tasked with (a) identifying prior building protection studies, (b) extracting results relevant to US building construction, and (c) summarizing building protection by building type. This report focuses primarily on the protection against radiation from outdoor fallout particles (external gamma radiation).

  4. Comparative study of dark patinas on granitic outcrops and buildings

    Energy Technology Data Exchange (ETDEWEB)

    Prieto, B. [Dpto. Edafologia y Quimica agricola, Fac. Farmacia, Univ. Santiago de Compostela, 15782-Santiago de Compostela (Spain)]. E-mail: edprieto@usc.es; Aira, N. [Dpto. Edafologia y Quimica agricola, Fac. Farmacia, Univ. Santiago de Compostela, 15782-Santiago de Compostela (Spain); Silva, B. [Dpto. Edafologia y Quimica agricola, Fac. Farmacia, Univ. Santiago de Compostela, 15782-Santiago de Compostela (Spain)

    2007-08-01

    Formation of dark patinas on rocky surfaces is mainly related to the deposition of gases and particles and to sulphation mechanisms. In the present study, samples of dark patinas taken from granitic outcrops and from granitic buildings were examined in an attempt to understand the mechanisms of their formation. The outcrops are located in non-polluted areas and are characterized by the absence of any extraneous material that provides calcium, such as e.g. mortar. The buildings are located in areas with low levels of pollution. The climate in the study area favours proliferation of microorganisms. Important differences between the patinas sampled from outcrops and from buildings were observed, as the former are of biological origin and the latter of anthropogenic origin. Although the levels of pollution are low in the sampling area, sulphur was present in all of the samples from urban buildings. Sulphur was not present in patinas from outcrops or in patinas from monuments that are assumed to behave as outcrops (dolmens), although the latter are also of anthropogenic origin. Finally, the patinas were found to be formed by elements accumulated on the surface and not from elements contained within the rock itself.

  5. Indoor Localisation Based on GSM Signals: Multistorey Building Study

    Directory of Open Access Journals (Sweden)

    Rafał Górak

    2016-01-01

    Full Text Available Among the accurate indoor localisation systems that are using WiFi, Bluetooth, or infrared technologies, the ones that are based on the GSM rely on a stable external infrastructure that can be used even in an emergency. This paper presents an accurate GSM indoor localisation system that achieves a median error of 4.39 metres in horizontal coordinates and up to 64 percent accuracy in floor prediction (for 84 percent of cases the floor prediction is mistaken by not more than a single floor. The test and reference measurements were made inside a six-floor academic building, with an irregular shape, whose dimensions are around 50 metres by 70 metres. The localisation algorithm uses GSM signal readings from the 7 strongest cells available in the GSM standard (or fewer, if fewer than 7 are available. We estimate the location by a three-step method. Firstly, we propose a point localisation solution (i.e., localisation based on only one measurement. Then, by applying the central tendency filters and the Multilayer Perceptron, we build a localisation system that uses a sequence of estimations of current and past locations. We also discuss major accuracy factors such as the number of observed signals or the types of spaces in the building.

  6. A western boundary current eddy characterisation study

    Science.gov (United States)

    Ribbe, Joachim; Brieva, Daniel

    2016-12-01

    The analysis of an eddy census for the East Australian Current (EAC) region yielded a total of 497 individual short-lived (7-28 days) cyclonic and anticyclonic eddies for the period 1993 to 2015. This was an average of about 23 eddies per year. 41% of the tracked individual cyclonic and anticyclonic eddies were detected off southeast Queensland between about 25 °S and 29 °S. This is the region where the flow of the EAC intensifies forming a swift western boundary current that impinges near Fraser Island on the continental shelf. This zone was also identified as having a maximum in detected short-lived cyclonic eddies. A total of 94 (43%) individual cyclonic eddies or about 4-5 per year were tracked in this region. The census found that these potentially displaced entrained water by about 115 km with an average displacement speed of about 4 km per day. Cyclonic eddies were likely to contribute to establishing an on-shelf longshore northerly flow forming the western branch of the Fraser Island Gyre and possibly presented an important cross-shelf transport process in the life cycle of temperate fish species of the EAC domain. In-situ observations near western boundary currents previously documented the entrainment, off-shelf transport and export of near shore water, nutrients, sediments, fish larvae and the renewal of inner shelf water due to short-lived eddies. This study found that these cyclonic eddies potentially play an important off-shelf transport process off the central east Australian coast.

  7. User evaluations of energy efficient buildings: the interplay of buildings and users in seven European case studies

    Energy Technology Data Exchange (ETDEWEB)

    Thomsen, Judith; Hauge, Aashild Lappegaard; Denizou, Karine; Jerkoe, Sidsel; Waagoe, Solvaar; Berker, Thomas

    2011-07-01

    The buildings in our study have been operational for just a short period and most of them are still in an adjustment phase. The findings show that users in all case studies often stressed the positive aspects connected to the newness and the architectural quality of the buildings. The interviews also show that energy efficiency is often regarded as a bonus or side effect that is gladly accepted but not the main criteria for choosing a house. Nonetheless, most residents seemed to appreciate the environmental benefits over time. Several respondents were also more concerned about the environment now than before they moved into or started to work in an energy efficient building, and they also reported more environmentally friendly behaviour. In most of the case studies, concerns were expressed about thermal comfort. Informants often experienced the building as too hot in the summer and/or too cold in the winter. This perceived discomfort caused different types of personal actions, which had a potential to interfere with the concept and the calculated energy balance. In order to improve internal conditions, the users in almost every case intervened with the planned use. They found common and known ways to improving their comfort in the buildings without considering how to optimize the new system. None of the respondents had much prior knowledge of energy efficient buildings before moving in or starting to work in the case study buildings. They did not know what to expect from their new environment, and were unfamiliar with the concepts. Many of the informants complained about a lack of information on systems and insufficient training. The studies also show that the occupants desired to control at least some operational aspects. Despite intermittent difficulties with thermal comfort, the tolerance for the buildings performance appeared to be high throughout all the case studies and many respondents were proud of 'their' buildings. Energy efficient buildings are

  8. Continuous commissioning of buildings: A case study of a campus building in Denmark

    DEFF Research Database (Denmark)

    Markoska, Elena; Jradi, Muhyiddine; Jørgensen, Bo Nørregaard

    2017-01-01

    The general trend in building commissioning is that the commissioning is often either insufficiently comprehensive in its execution, or it is not conducted at all. As such, it has been observed that buildings often will contain faults that have not been discovered during the commissioning phase. ...... of three months, and the results of the performance tests are presented within a dashboard application, which helps verify that the building is performing accordingly to its original design intent....

  9. Building America Case Study: Solar Water Heating in Multifamily Buildings, Greenfield, Massachusetts

    Energy Technology Data Exchange (ETDEWEB)

    2016-05-01

    Solar domestic hot water (SDHW) systems have been installed on buildings for decades, but because of relatively high costs they have not achieved significant market penetration in most of the country. As more buildings move towards zero net energy consumption, however, many designers and developers are looking more closely at SDHW. In multifamily buildings especially, SDHW may be more practical for several reasons: (1) When designing for zero net energy consumption, solar water heating may be part of the lowest cost approach to meet water heating loads. (2) Because of better scale, SDHW systems in multifamily buildings cost significantly less per dwelling than in single-family homes. (3) Many low-load buildings are moving away from fossil fuels entirely. SDHW savings are substantially greater when displacing electric resistance water heating. (4) In addition to federal tax incentives, some states have substantial financial incentives that dramatically reduce the costs (or increase the benefits) of SDHW systems in multifamily buildings. With support from the U.S. DOE Building America program, the Consortium for Advanced Residential Buildings (CARB) worked with a developer in western Massachusetts to evaluate a SDHW system on a 12-unit apartment building. Olive Street Development completed construction in spring of 2014, and CARB has been monitoring performance of the water heating systems since May 2014.

  10. Recent Advances in Studies of Current Noise

    Science.gov (United States)

    Blanter, Yaroslav M.

    This is a brief review of recent activities in the field of current noise intended for newcomers. We first briefly discuss main properties of shot noise in nanostructures, and then turn to recent developments, concentrating on issues related to experimental progress: non-symmetrized cumulants and quantum noise; counting statistics; super-Poissonian noise; current noise and interferometry

  11. Demystifying green buildings through green building issues, case studies and resources

    Energy Technology Data Exchange (ETDEWEB)

    Simon, L.N.

    1996-05-01

    Information and research on sustainability, energy and environmental efficiency, and {open_quotes}green{close_quotes} technologies and products is emerging at a rapid rate. Worldwide, organizations are developing green databases, resource guides, standards, specifications, videos, assessment methods, and research tools to educate the building industry, non-profit organizations, governmental agencies, and the general public. Learning what information is available, knowing where to locate the resources, and accessing this information is the first step in designing and building green buildings. The American Society for Testing Materials (ASTM) describes green buildings as residential, industrial and commercial structures that are designed, constructed, renovated, operated, and reused in an environmentally and energy-efficient manner. Specifically, green buildings aim to lessen their global impact through energy and resource efficiency, to provide good indoor environmental and air quality, to assure occupant health and productivity, to encourage efficient modes of transportation, and to improve the site where they are located. These concepts need to be addressed not as a single issue, however, but in an integrated approach. Green designers and builders recognize that a decision made in one area often affects decisions made in others. Ideally, green building concepts are applied throughout the {open_quotes}whole building{close_quotes}, and over its entire life cycle. Below is a list of green building resources organized by the life cycle of a green building, beginning with their Significance, and including Site Design, Building Design, Construction Process, Building Management and Operations & Maintenance. The resources include books, newsletters, sourcebooks, government publications, and electronic tools.

  12. Earthquake Analysis of Multi Storied Residential Building - A Case Study

    Directory of Open Access Journals (Sweden)

    E. Pavan Kumar

    2014-11-01

    Full Text Available Earthquake occurred in multistoried building shows that if the structures are not well designed and constructed with and adequate strength it leads to the complete collapse of the structures. To ensure safety against seismic forces of multi-storied building hence, there is need to study of seismic analysis to design earthquake resistance structures. In seismic analysis the response reduction was considered for two cases both Ordinary moment resisting frame and Special moment resisting frame. The main objective this paper is to study the seismic analysis of structure for static and dynamic analysis in ordinary moment resisting frame and special moment resisting frame. Equivalent static analysis and response spectrum analysis are the methods used in structural seismic analysis. We considered the residential building of G+ 15 storied structure for the seismic analysis and it is located in zone II. The total structure was analyzed by computer with using STAAD.PRO software. We observed the response reduction of cases ordinary moment resisting frame and special moment resisting frame values with deflection diagrams in static and dynamic analysis. The special moment of resisting frame structured is good in resisting the seismic loads.

  13. Building America Case Study: Savannah Gardens, Savannah, Georgia

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    Southface Energy Institute (Southface) partnered with owners and/or builders with various market constraints and ultimate goals for three projects in different climate zones: Savannah, GA (CZ 2), Clemson, SC (CZ 3), and LaFayette, GA (CZ 4). This report documents the design process, computational energy modeling, construction, envelope performance metrics, long-term monitoring results, and successes and failures of the design and execution of these high performance homes. The three bedroom/two bathroom test home in Savannah Gardens on an elevated slab foundation has a semi-conditioned, encapsulated attic. A neighboring home built to EarthCraft specifications was also monitored as a control for exterior foam insulation and a heat pump water heater (HPWH). For the JMC Patrick Square, a single-story project in Clemson, the small-scale production builder wanted to increase their level of energy efficiency beyond their current green building practices, including bringing ducts into conditioned space. Through a combination of upgrade measures the team met this goal and achieved many Zero Energy Ready Home requirements. LaFayette Housing Authority undertook a development of 30 affordable rental housing units in 15 duplexes in LaFayette, GA. Because they would be long-term owners, their priorities were low utility bills for the residents and durable, maintainable buildings. The team employed BEopt to optimize building envelope and systems choices, including 2x6 advanced framed walls, insulated slab, and heat pump water heater in a utility closet which was ducted to/from an encapsulated attic.

  14. Continuous commissioning of buildings: A case study of a campus building in Denmark

    DEFF Research Database (Denmark)

    Markoska, Elena; Jradi, Muhyiddine; Jørgensen, Bo Nørregaard

    2016-01-01

    The general trend in building commissioning is that the commissioning is often either insufficiently comprehensive in its execution, or it is not conducted at all. As such, it has been observed that buildings often will contain faults that have not been discovered during the commissioning phase. ...

  15. Use of LCA as a Tool for Building Ecodesign. A Case Study of a Low Energy Building in Spain

    Directory of Open Access Journals (Sweden)

    Alberto Jáñez

    2013-08-01

    Full Text Available This paper demonstrates how to achieve energy savings in the construction and operation of buildings by promoting the use of life cycle assessment techniques in the design for new buildings and for refurbishment. The paper aims to draw on the application of a specific methodology for low energy consumption, integrated planning, environmental performance evaluation of buildings, and design for sustainability and LCA techniques applied to buildings. The ENergy Saving through promotion of LIfe Cycle assessment in buildings (ENSLIC methodology based on LCA for use in an integral planning process has been promoted to stakeholders who require a means to optimize the environmental performance of buildings. Feedback from the stakeholders has facilitated the creation of simplified LCA guidelines, a systematic approach guiding the user through the alternative options regarding software choices, their strengths and weaknesses, the databases available, the usefulness of different indicators, aggregation, definition of limits and options for simplifying the process. As a result, this paper presents the applied results of a case study where this methodology is implemented serving as an energy savings evaluation tool for decision makers, end-users, professionals involved in the different stages of construction, etc. Finally, it is demonstrated how LCA can facilitate comparisons between different buildings, showing the influence of all variables on a building’s life cycle environmental impact and showing the potential for energy savings. Removing market barriers to sustainable construction is actually stricter and this is good news for promoting higher energy efficiency in buildings.

  16. Regional Energy Study Zahorie, Slovakia. Building energy audits. Part 4. Nafta Gbely office building, Malacky

    Energy Technology Data Exchange (ETDEWEB)

    Kaan, H.F.

    1995-10-01

    The building was audited by means of a visual inspection of building quality, energy aspects and quality and performance of appliances. Additional information came from drawings, energy bills and design documents. Information about management aspects was obtained by interviews with the management of the building. In general it may be concluded, that energy saving potential is rather high. Energy savings can be obtained in the first place by improving the energy management. However, technical measures are required as well. Some of these do not ask for high investments and should directly be implemented. But high cost measures are required as well. 5 tabs., 1 refs., 1 appendix

  17. Relationship between Quality of Building Maintenance Management Services for Indoor Environmental Quality and Occupant Satisfaction: Case Study of Bus Terminal Buildings in Penang

    Directory of Open Access Journals (Sweden)

    Full Chong Choon

    2014-01-01

    Full Text Available Maintenance is often defined as the series of activities undertaken to take care of the building structure and services to ensure the intended functions and optimal performance of a building life cycle. The management department of a building is usually responsible for the enhancement of the indoor environment quality by service delivery and for boosting occupant productivity and satisfaction. Thus, a salient point of this study is to determine the current level of the building’s maintenance management service for indoor environmental quality in Penang bus terminals, along with its occupant satisfaction with regards to the services provided in the building. The assessment of the indoor environmental quality includes the evaluation of thermal comfort, lighting condition, air quality and cleanliness. Apart from that, qualitative and quantitative methodologies were applied during the process of data collection and analysis. A questionnaire survey was distributed to 500 of the targeted population for each bus terminal, including passengers and the staff. In this study, the conclusion was drawn in which the maintenance management service level of the bus terminal was directly proportional to occupant satisfaction. However, the current quality of maintenance management services in the bus terminals are still not up to the level of the occupants’ satisfaction.

  18. The Current Canon in British Romantics Studies.

    Science.gov (United States)

    Linkin, Harriet Kramer

    1991-01-01

    Describes and reports on a survey of 164 U.S. universities to ascertain what is taught as the current canon of British Romantic literature. Asserts that the canon may now include Mary Shelley with the former standard six major male Romantic poets, indicating a significant emergence of a feminist perspective on British Romanticism in the classroom.…

  19. Study of intelligent building system based on the internet of things

    Science.gov (United States)

    Wan, Liyong; Xu, Renbo

    2017-03-01

    In accordance with the problem such as isolated subsystems, weak system linkage and expansibility of the bus type buildings management system, this paper based on the modern intelligent buildings has studied some related technologies of the intelligent buildings and internet of things, and designed system architecture of the intelligent buildings based on the Internet of Things. Meanwhile, this paper has also analyzed wireless networking modes, wireless communication protocol and wireless routing protocol of the intelligent buildings based on the Internet of Things.

  20. AN EMPIRICAL STUDY OF CURRENT RATIO

    Directory of Open Access Journals (Sweden)

    Atanas Delev

    2014-10-01

    Full Text Available This work aims to address problems of liquidity and in particular the values and factors that influenced the values of the coefficient of total liquidity sixty Bulgarian public companies for the period 2013 - 2007 year. In the analysis it was found that some businesses fail to achieve favorable values of the ratio between current assets and current liabilities. It was found that plants have a low level of total liquidity, which can create problems in repayment of short-term liabilities. It can be seen that there are companies with very high liquidity, which is not so good phenomenon, ie the retention of a high level of resources required. Businesses should conduct a thorough analysis and implement appropriate measures to correct adverse changes. The financial management of the companies surveyed had worked towards improving the state of the enterprise, thereby seeking to reduce liquidity risk.

  1. Commercializing Government-sponsored Innovations: Twelve Successful Buildings Case Studies

    Science.gov (United States)

    Brown, M. A.; Berry, L. G.; Goel, R. K.

    1989-01-01

    This report examines the commercialization and use of R and D results funded by DOE's Office of Buildings and Community Systems (OBCS), an office that is dedicated to improving the energy efficiency of the nation's buildings. Three goals guided the research described in this report: to improve understanding of the factors that hinder or facilitate the transfer of OBCS R and D results, to determine which technology transfer strategies are most effective and under what circumstances each is appropriate, and to document the market penetration and energy savings achieved by successfully-commercialized innovations that have received OBCS support. Twelve successfully-commercialized innovations are discussed here. The methodology employed involved a review of the literature, interviews with innovation program managers and industry personnel, and data collection from secondary sources. Six generic technology transfer strategies are also described. Of these, contracting R and D to industrial partners is found to be the most commonly used strategy in our case studies. The market penetration achieved to date by the innovations studied ranges from less than 1% to 100%. For the three innovations with the highest predicted levels of energy savings (i.e., the flame retention head oil burner, low-E windows, and solid-state ballasts), combined cumulative savings by the year 2000 are likely to approach 2 quads. To date the energy savings for these three innovations have been about 0.2 quads. Our case studies illustrate the important role federal agencies can play in commercializing new technologies.

  2. CRITICAL CURRENT AND JUNCTION BETWEEN PANCAKE STUDIES FOR HTS COIL DESIGN

    CERN Document Server

    Lécrevisse, Y; Louchart, O; Rey, J-M; Tixador, P

    2011-01-01

    YBCO Coated Conductor (CC) are very attractive for very high magnetic field coil with lower cryogenics need. We study two major aspects of HTS coil building. First the results of critical current measurements on YBCO tape provided by SuperPower are presented for a large temperature range and in parallel magnetic field configuration. A model is also proposed to extrapolate those measurements at other temperatures and fields. Then we focus on the critical aspect of junctions between pancakes. Junctions in cylindrical configuration are studied using three different soldering materials. The results are promising for further coil building.

  3. Building Collaborative Health Promotion Partnerships: The Jackson Heart Study

    Directory of Open Access Journals (Sweden)

    Clifton C. Addison

    2015-12-01

    Full Text Available Building Collaborative Health Promotion Partnerships: The Jackson Heart Study. Background: Building a collaborative health promotion partnership that effectively employs principles of community-based participatory research (CBPR involves many dimensions. To ensure that changes would be long-lasting, it is imperative that partnerships be configured to include groups of diverse community representatives who can develop a vision for long-term change. This project sought to enumerate processes used by the Jackson Heart Study (JHS Community Outreach Center (CORC to create strong, viable partnerships that produce lasting change. Methods: JHS CORC joined with community representatives to initiate programs that evolved into comprehensive strategies for addressing health disparities and the high prevalence of cardiovascular disease (CVD. This collaboration was made possible by first promoting an understanding of the need for combined effort, the desire to interact with other community partners, and the vision to establish an effective governance structure. Results: The partnership between JHS CORC and the community has empowered and inspired community members to provide leadership to other health promotion projects. Conclusion: Academic institutions must reach out to local community groups and together address local health issues that affect the community. When a community understands the need for change to respond to negative health conditions, formalizing this type of collaboration is a step in the right direction.

  4. Experimental Study on Volume for Fly Ash of Building Block

    Directory of Open Access Journals (Sweden)

    Ling Wang

    2013-04-01

    Full Text Available Fly ash is a waste substance from thermal power plants, steel mills, etc. That is found in abundance in the world. It has polluted the environment, wasting the cultivated land. This study introduces an experimental research on fly ash being reused effectively, the study introduces raw materials of fly ash brick, production process and product inspection, fly ash content could be amounted to 40%~75%. High doping fly ash bricks are manufactured, which selects wet fly ash from the power plants, adding aggregate with reasonable ratio and additives with reasonable dosage and do the experimental research on manufacture products for properties, production technology and selection about technology parameter of production equipment. Index of strength grade and freezing-thawing resisting etc and the high doping fly ash brick building which we are working on can achieve the national standard on building materials industry. Based on the tests, this achievement of research has a very wide practical prospect in using fly ash, industrial waste residue, environmental protection and reducing the cost of enterprises. The efficient reuse of fly ash from coal boiler and power plants has very vital significance of protecting the environment, benefiting descendants and developing of circular economy.

  5. 2009 EnerQuality energy efficiency/green building study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-09-15

    An energy efficiency/green building study was conducted in 2009 related to the perceptions of consumers in making energy efficiency decisions. This presentation provided information and analysis related to the importance of energy efficiency when deciding on a new home purchase; reasons why energy efficiency is important to buyers; energy efficiency features proposed by the builder; the perceived benefit of energy efficient features; and how well builders communicate the benefits of an energy efficient home. In addition, the presentation described energy efficient features purchased by new home buyers and related cost; the likelihood of buyers to search and pay for an energy efficient home; measuring the awareness of different energy efficient certification labels; the importance buyers place on energy efficient certification labels; the importance buyers place on other green building aspects, in addition to energy efficiency; and new home buyers' perceptions toward energy efficiency. The presentation concluded that almost 9 out of 10 homeowners perceive energy efficiency to be important. In addition, cost savings is perceived to be the most important energy efficiency benefit to buyers followed by a healthier indoor environment. figs.

  6. A Study on Plant Selection for Green Building Design

    Directory of Open Access Journals (Sweden)

    Izudinshah Abd. Wahab

    2013-02-01

    Full Text Available Previous researches show that incorporating natural elements in design has proven a significant result in balancing building indoor environment. Using plant as part of the design has been widely accepted to contribute good thermal impact as shown in bioclimatic design, green roofing system and living wall elements. As there are so many species of plants for selection, this research was carried out to analyze types of indoor plants that have the potential to contribute thermal comfort to their surrounding. Based on the fact that plant leaves are the part where transpiration and guttation take place, plants are categorized into seven types based on their leaves architecture. They were then tested on their impact on surrounding temperature and humidity. Result shows that Linear, Lanceolate and Oblong shaped leaves categories are good in lowering the relative humidity while the categories that are good in lowering the temperature are Linear, Lanceolate, Cordate and Oblong shaped leaves categories. The study was carried out through series of relative humidity and air temperature monitoring of several room casings that consist with the plants. Both relative humidity and air temperature of the rooms with plants were recorded lower compared with the one without plant. Different categories of plants do give good result in relative humidity and air temperature. Thus, with a good combination of plant installation inside or onto building, it may contribute towards providing a good thermal comfort to the occupants.

  7. Building theories from case study research: the progressive case study

    NARCIS (Netherlands)

    Steenhuis, Harm-Jan; Bruijn, de Erik J.

    2006-01-01

    Meredith (1998) argues for more case and field research studies in the field of operations management. Based on a literature review, we discuss several existing approaches to case studies and their characteristics. These approaches include; the Grounded Theory approach which proposes no prior litera

  8. The evaluation of building occupants' public awareness on energy efficiency: The study case of Chancellery Building, USM

    Science.gov (United States)

    Baharum, Faizal; Zainon, Mohamad Rizal; Seng, Loh Yong

    2016-08-01

    It is increasingly perceived that considerable energy savings in building can be accomplished in buildings through changes in staff's behavior. This study explored the public awareness of energy consumption and their perceived level of control over energy use. Generally, individual awareness and attitudes about the need to conserve energy, the perceived actions and opinions of other users and views of control over the ease and opportunity to reduce energy consumption were seen by staffs to identify with whether they would expect to save energy in Chancellery Building, USM. It is important that staff engagement in the successful achievement of the target on energy saving. Therefore, the aim of this research is to create a survey instrument by using staffs as benchmark of evaluation, for the identification of problems in respect to aware the public of energy saving and energy-efficiency in Chancellery Building. This research was conducted in the office of Chancellery Building, USM. Survey forms had been distributed to the staffs in the office to determine their awareness towards energy saving. The results were investigated by utilizing Statistical Package for the Social Science (SPSS) in order to determine its reliability and validity. The research result helped the advancement of energy-efficiency and determine the wastefulness of the existed building.

  9. Commercializing government-sponsored innovations: Twelve successful buildings case studies

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.A.; Berry, L.G.; Goel, R.K.

    1989-01-01

    This report examines the commercialization and use of R and D results funded by DOE's Office of Buildings and Community Systems (OBCS), an office that is dedicated to improving the energy efficiency of the nation's buildings. Three goals guided the research described in this report: to improve understanding of the factors that hinder or facilitate the transfer of OBCS R and D results, to determine which technology transfer strategies are most effective and under what circumstances each is appropriate, and to document the market penetration and energy savings achieved by successfully-commercialized innovations that have received OBCS support. Twelve successfully-commercialized innovations are discussed here. The methodology employed involved a review of the literature, interviews with innovation program managers and industry personnel, and data collection from secondary sources. Six generic technology transfer strategies are also described. Of these, contracting R and D to industrial partners is found to be the most commonly used strategy in our case studies. The market penetration achieved to date by the innovations studied ranges from less than 1% to 100%. For the three innovations with the highest predicted levels of energy savings (i.e., the flame retention head oil burner, low-E windows, and solid-state ballasts), combined cumulative savings by the year 2000 are likely to approach 2 quads. To date the energy savings for these three innovations have been about 0.2 quads. Our case studies illustrate the important role federal agencies can play in commercializing new technologies. 27 refs., 21 figs., 4 tabs.

  10. Renovation And Modernization Of Hotel Buildings - Case Studies In Silesia

    Science.gov (United States)

    Bradecki, Tomasz; Uherek-Bradecka, Barbara

    2015-12-01

    The cultural heritage of Silesia has different backgrounds and is often characterized by difficult to assess values. There is doubt as to whether some of the existing buildings should be modernized. Since 2000, an increase in the amount of investments in hotel buildings and conference venues in Poland has been observed. The functions and roles of hotels within a city have also changed. The paper presents examples of original projects and realizations of hotel buildings in Silesia. A discussion was also held regarding the issue of adapting and modernizing hotel buildings.

  11. On-Site Energy Management by Integrating Campus Buildings and Optimizing Local Energy Systems, Case Study of the Campus in Finland

    Directory of Open Access Journals (Sweden)

    Genku Kayo

    2016-12-01

    Full Text Available This research work describes the potential study on the impact of energy improvements of existing campus buildings by on-site energy management and operational strategies. The focus buildings in the campus are mainly built in the 1960s, and therefore it is time to carry out renovation work. In connection with renovations, the aim is to improve the energy efficiency of the buildings, and to develop the functionality of the properties to meet the current requirements. Thus, in this study, the potentials of on-site energy generation and sharing in the cluster of campus buildings in Finland were studied. By means of optimisation method, the optimal combined heat and power systems (CHP capacity distribution and operation mode for minimizing annual primary energy consumption were simulated. The results show the integration of buildings has advantage for on-site energy management as 23% of primary energy reduction compared with current situation. Consequently, integrating buildings and optimizing on-site energy management can be one of effective strategies for minimizing primary energy consumption. Furthermore, the study to improve operation strategies of building service system considering current space use in the building clarified that up to 13% of total energy use reduction is expected. The research work also proposes the way of providing environmental information to increase awareness of building energy usage in the campus.

  12. Current Research on Chinese Students Studying Abroad

    Science.gov (United States)

    Henze, Jurgen; Zhu, Jiani

    2012-01-01

    As a result of China's growing participation and importance in the process of internationalization and globalization a continuously rising number of Chinese students has gone abroad for further study. By the end of the last decade the number of Chinese students abroad made up the largest group of international students in the USA (surpassing those…

  13. Current Research on Chinese Students Studying Abroad

    Science.gov (United States)

    Henze, Jurgen; Zhu, Jiani

    2012-01-01

    As a result of China's growing participation and importance in the process of internationalization and globalization a continuously rising number of Chinese students has gone abroad for further study. By the end of the last decade the number of Chinese students abroad made up the largest group of international students in the USA (surpassing those…

  14. Current studies on myofascial pain syndrome.

    Science.gov (United States)

    Kuan, Ta-Shen

    2009-10-01

    Recent studies have clarified the nature of myofascial trigger points (MTrPs). In an MTrP region, multiple hyperirritable loci can be found. The sensory components of the MTrP locus are sensitized nociceptors that are responsible for pain, referred pain, and local twitch responses. The motor components are dysfunctional endplates that are responsible for taut band formation as a result of excessive acetylcholine (ACh) leakage. The concentrations of pain- and inflammation-related substances are increased in the MTrP region. It has been hypothesized that excessive ACh release, sarcomere shortening, and release of sensitizing substances are three essential features that relate to one another in a positive feedback cycle. This MTrP circuit is the connection among spinal sensory (dorsal horn) neurons responsible for the MTrP phenomena. Recent studies suggest that measurement of biochemicals associated with pain and inflammation in the MTrP region, the sonographic study of MTrPs, and the magnetic resonance elastography for taut band image are potential tools for the diagnosis of MTrPs. Many methods have been used to treat myofascial pain, including laser therapy, shockwave therapy, and botulinum toxin type A injection.

  15. Building construction materials effect in tropical wet and cold climates: A case study of office buildings in Cameroon

    Directory of Open Access Journals (Sweden)

    Modeste Kameni Nematchoua

    2016-03-01

    Full Text Available This paper presents the results of an experimental study that was conducted in 15 office buildings in the humid and cold tropics during the working hours of the dry and rainy seasons in Cameroon. This was with the aim to study the effects that local and imported materials had on indoor air quality. To achieve this objective, the adaptive model approach has been selected. In accordance with the conditions of this model, all workers were kept in natural ventilation and, in accordance with the general procedure, a questionnaire was distributed to them, while variables, like air temperature, wind speed, and relative humidity were sampled. The results showed a clear agreement between expected behaviour, in accordance with the characteristics of building construction, and its real indoor ambience once they were statistically analysed. On the other hand, old buildings showed a higher percentage of relative humidity and a lower degree of indoor air temperature. Despite this, local thermal comfort indices and questionnaires showed adequate indoor ambience in each group of buildings, except when marble was used for external tiling. The effect of marble as an external coating helps to improve indoor ambience during the dry season. This is due to more indoor air and relative humidity being accumulated. At the same time, these ambiences are degraded when relative humidity is higher. Finally, these results should be taken cognisance of by architects and building designers in order to improve indoor environment, and overcome thermal discomfort in the Saharan area.

  16. Tobin Tax: Arguments and Current Derivative Studies

    Directory of Open Access Journals (Sweden)

    Ozekicioglu Seda

    2015-04-01

    Full Text Available Tobin Tax and its derivative applications have started to be discussed again in many platforms as the issue regarding taxation of short-term capital movements has become an agenda among international communities such as European Union (EU and G20 since the beginning of 2000s. In this study, Tobin Tax, which is the first significant step towards taxation of foreign currency transactions, has been discussed theoretically and considering its possible effects on application. Also, in this context, the initiatives of countries such as USA, Belgium, France and Austria regarding international implementation of Tobin Tax and its derivatives are being evaluated. The intended use of the taxes, determination of transactions exempt from tax and international cooperation in the implementation of taxation are possible problems that can be faced regarding Tobin Tax. In this study the conclusion, which the effects of Tobin Tax in developing and developed countries will be different but imposing such tax regarding cyclic balance of the world economy will be a positive improvement, has been reached.

  17. Ocular biomechanics study: current state and perspectives

    Directory of Open Access Journals (Sweden)

    S. Yu. Petrov

    2015-03-01

    Full Text Available Despite the fact that the eye represents a challenge for biomechanical research due to its size, over the last two decades, much data on ocular biomechanics were accumulated. Scleral and lamina cribrosa biomechanics contribute to our understanding of myopia and open-angle glaucoma; iris and trabecular meshwork biomechanics to that of angle-closure glaucoma; vitreous biomechanics to that of retinal detachment and ocular drug delivery; corneal biomechanics to that of keratoconus; and lens capsule biomechanics to that of cataract. This paper offers a general overview of recent advances in corneal, scleral, crystalline lens, and lamina cribrosa biomechanics and summarizes the results of experimental and clinical studies. Ocular biomechanics abnormalities affect etiology of many eye diseases. Ocular biomechanics plays an important role in the development of novel diagnostic methods, therapeutic and surgical procedures. Corneal biomechanics impacts etiology and pathogenesis of keratoconus as well as tonometry accuracy and explains corneal refractive surgery effect. Scleral biomechanics is associated with IOP and progressive myopia. Accommodative apparatus (ciliary body and crystalline lens is an important anatomic physiological structure. Recent studies uncovered the causes of agerelated loss of accommodation as a result of lens involution. Optic nerve head abnormalities due to IOP fluctuations are the key factor of glaucomatous neuropathy. They are directly associated with ocular biomechanics as well.

  18. Ocular biomechanics study: current state and perspectives

    Directory of Open Access Journals (Sweden)

    S. Yu. Petrov

    2015-01-01

    Full Text Available Despite the fact that the eye represents a challenge for biomechanical research due to its size, over the last two decades, much data on ocular biomechanics were accumulated. Scleral and lamina cribrosa biomechanics contribute to our understanding of myopia and open-angle glaucoma; iris and trabecular meshwork biomechanics to that of angle-closure glaucoma; vitreous biomechanics to that of retinal detachment and ocular drug delivery; corneal biomechanics to that of keratoconus; and lens capsule biomechanics to that of cataract. This paper offers a general overview of recent advances in corneal, scleral, crystalline lens, and lamina cribrosa biomechanics and summarizes the results of experimental and clinical studies. Ocular biomechanics abnormalities affect etiology of many eye diseases. Ocular biomechanics plays an important role in the development of novel diagnostic methods, therapeutic and surgical procedures. Corneal biomechanics impacts etiology and pathogenesis of keratoconus as well as tonometry accuracy and explains corneal refractive surgery effect. Scleral biomechanics is associated with IOP and progressive myopia. Accommodative apparatus (ciliary body and crystalline lens is an important anatomic physiological structure. Recent studies uncovered the causes of agerelated loss of accommodation as a result of lens involution. Optic nerve head abnormalities due to IOP fluctuations are the key factor of glaucomatous neuropathy. They are directly associated with ocular biomechanics as well.

  19. Study of high current commutation by explosive switch

    Science.gov (United States)

    Usuba, S.; Kakudate, Y.; Yoshida, M.; Fujiwara, S.; Miyamoto, M.; Morita, T.; Kubota, A.; den, M.

    1993-01-01

    The study presents the basic experimental data obtained with a large current opening switch for current commutation using explosives. It is shown that currents up to a maximum of 40 kA can be completely interrupted within 30 microsec. The mechanism of current interruption using a thin conductor plate and methods of measuring interrupting current with a pickup coil and taking photographs with a high-speed camera (one frame per microsec) are discussed.

  20. Energy and electricity use in buildings. Pre-study; Energi- och Elanvaendning i byggnader. Foerstudie

    Energy Technology Data Exchange (ETDEWEB)

    Dalenbaeck, Jan-Olof; Goeransson, Anders; Jagemar, Lennart [Chalmers EnergiCentrum CEC, Goeteborg (Sweden)

    2006-05-15

    The built environment accounts for 40 % of energy use and 50 % of electricity use in Sweden. Sweden uses more than twice as much electrical energy as the mean value for EU-15 and the principal reason for this is good access to relatively inexpensive electricity. This pre-study summarises the current use of electricity, the prerequisites and potential for reducing the use of electricity and current RDandD projects focusing on the use of energy. It also gives a brief description of a couple of visions for the future. The proposed research projects focus on describing the use of electricity (energy, output, voltage etc) and analysing the way different control mechanisms influence the opportunity to realise sustainable developments. The heated areas in houses and buildings are distributed as follows: 45 % in detached or semi-detached houses, 30 % in blocks of flats (including some business premises) and 25 % in business premises. About 80 % of these areas were erected before 1980. A large percentage of the energy that is supplied to these houses and buildings, around 65 %, is used for various heating purposes, first and foremost in older detached or semi-detached houses and blocks of flats. The heating for detached or semi-detached houses is supplied in many different ways, while district heating is primarily responsible for the heating that is supplied to blocks of flats and business premises. A large percentage of the electricity usage is accounted for by heating, primarily in new detached or semi-detached houses, and electricity for operations in business premises - around 35% and 28% respectively. In addition to heating, electricity is used first and foremost for lighting and different types of electrical equipment, but most of the existing statistics relating to the distribution of electricity usage between different applications are based on old surveys and studies and need to be updated. It is estimated that the techno-economic potential for saving energy in

  1. Industrialized Building System/Two-Step Procurement Pilot Projects: Three Case Studies.

    Science.gov (United States)

    1985-01-01

    The fascia , soffit, guttering, and other accessories are also part of the building system. All other construction used conventional materials and...implied. It was intended that this plan IM. C. Carroll and T. R. Napier, A Case Study for Industrialized Building Products and Innovative Building

  2. Study of global stability of tall buildings with prestressed slabs

    Directory of Open Access Journals (Sweden)

    L. A. Feitosa

    Full Text Available The use of prestressed concrete flat slabs in buildings has been increasing in recent years in the Brazilian market. Since the implementation of tall and slender buildings a trend in civil engineering and architecture fields, arises from the use of prestressed slabs a difficulty in ensuring the overall stability of a building without beams. In order to evaluate the efficiency of the main bracing systems used in this type of building, namely pillars in formed "U" in elevator shafts and stairs, and pillars in which the lengths are significantly larger than their widths, was elaborated a computational models of fictional buildings, which were processed and analyzed using the software CAD/TQS. From the variation of parameters such as: geometry of the pillars, thick slabs, characteristic strength of the concrete, reduceofthe coefficient of inertia for consideration of non-linearities of the physical elements, stiffness of the connections between slabs and pillars, among others, to analyze the influence of these variables on the overall stability of the building from the facing of instability parameter Gama Z, under Brazilian standard NBR 6118, in addition to performing the processing of building using the P-Delta iterative calculation method for the same purpose.

  3. A sustainable building promotes pro-environmental behavior: an observational study on food disposal.

    Science.gov (United States)

    Wu, David W-L; DiGiacomo, Alessandra; Kingstone, Alan

    2013-01-01

    In order to develop a more sustainable society, the wider public will need to increase engagement in pro-environmental behaviors. Psychological research on pro-environmental behaviors has thus far focused on identifying individual factors that promote such behavior, designing interventions based on these factors, and evaluating these interventions. Contextual factors that may also influence behavior at an aggregate level have been largely ignored. In the current study, we test a novel hypothesis--whether simply being in a sustainable building can elicit environmentally sustainable behavior. We find support for our hypothesis: people are significantly more likely to correctly choose the proper disposal bin (garbage, compost, recycling) in a building designed with sustainability in mind compared to a building that was not. Questionnaires reveal that these results are not due to self-selection biases. Our study provides empirical support that one's surroundings can have a profound and positive impact on behavior. It also suggests the opportunity for a new line of research that bridges psychology, design, and policy-making in an attempt to understand how the human environment can be designed and used as a subtle yet powerful tool to encourage and achieve aggregate pro-environmental behavior.

  4. Maintenance and Energy Optimization of Lighting Systems for the Improvement of Historic Buildings: A Case Study

    Directory of Open Access Journals (Sweden)

    Ferdinando Salata

    2015-08-01

    Full Text Available Proper lighting is vital to improve, from an artistic point of view, the surface expanse and decorative detailing of architectural heritage buildings considered valuable. When properly lit, monumental buildings can become to onlookers an essential part of the city. Nowadays, for design planners dealing with the improvement of buildings, whose architectural design should be valorized, the real challenge is to combine the lighting artistic requirements with scrupulous economic management in order to limit the energy demand and to respect the environment. For these reasons, this case study examines the lighting of the monumental façade and the cloister of St. Peter in Chains situated in the Faculty of Engineering of Sapienza University of Rome. The present lighting installation, characterized by metal halides, compact fluorescent and halogen lamps, is compared with an alternative scenario presenting LED lamps and scenographic lighting of the monumental façade. Such comparison is based on the evaluation of the lighting levels for different visual tasks and on energy and maintenance issues; the first analysis was performed through the software DIALux Evo 4.0, whereas the second was performed using ecoCALC. This study leads to the conclusion that the lighting levels of the solution presenting LED lamps are better than those of the present solution, and they comply with current standards. Finally, the higher costs of LED lamp installations and the scenographic lighting of the monumental façade are balanced by lower maintenance costs, with a payback period of seven years.

  5. A sustainable building promotes pro-environmental behavior: an observational study on food disposal.

    Directory of Open Access Journals (Sweden)

    David W-L Wu

    Full Text Available In order to develop a more sustainable society, the wider public will need to increase engagement in pro-environmental behaviors. Psychological research on pro-environmental behaviors has thus far focused on identifying individual factors that promote such behavior, designing interventions based on these factors, and evaluating these interventions. Contextual factors that may also influence behavior at an aggregate level have been largely ignored. In the current study, we test a novel hypothesis--whether simply being in a sustainable building can elicit environmentally sustainable behavior. We find support for our hypothesis: people are significantly more likely to correctly choose the proper disposal bin (garbage, compost, recycling in a building designed with sustainability in mind compared to a building that was not. Questionnaires reveal that these results are not due to self-selection biases. Our study provides empirical support that one's surroundings can have a profound and positive impact on behavior. It also suggests the opportunity for a new line of research that bridges psychology, design, and policy-making in an attempt to understand how the human environment can be designed and used as a subtle yet powerful tool to encourage and achieve aggregate pro-environmental behavior.

  6. Building America Case Study: Trade-Friendly Retrofit Insulated Panels for Existing Buildings, Albany, New York

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    This project evaluated the effectiveness and affordability of integrating retrofit insulated panels into a re-siding project. The Partnership for Home Innovation (PHI) teamed with New York State Energy Research and Development Authority (NYSERDA), the Albany Housing Authority (AHA), and the New York State Weatherization Assistance Program (WAP) administered by Albany Community Action Partnership to demonstrate an energy retrofit and siding upgrade on a two-story, seven unit, multifamily building in Albany New York (CZ 5). The project focused on accomplishing three goals - doubling the existing wall thermal resistance (from approximately R-13 to a weighted average of R-27), reduction of building air leakage, and completion of the retrofit within a budget where the additional cost for upgrading wall's thermal resistance is equal to the cost of the standard re-siding effort (i.e., the total cost of the energy efficient re-siding scope of work is not more than double the cost of the standard re-siding effort). Lessons learned from the project strongly indicate that the retrofit panel technology can be installed using common installation practices and with minimal training. Other lessons learned include limitation on the use of standard air sealing materials during cold weather installations and the need to develop better installation guidance for trades working with the level of tolerances that may be present in the existing structure. This technology demonstration showed that exterior retrofit panels provide a viable and reasonable option for the siding trades to increase market opportunities and achieve synergistic benefits for aesthetic upgrades to a building's exterior.

  7. Reflections on the Brand Building of Animation Specialty under the Industry Background of the Current “Broad Animation”Based on the Case Study of Jingling Institute of Technology%“大动画”产业背景下动画专业品牌化建设的思考--以金陵科技学院为例

    Institute of Scientific and Technical Information of China (English)

    袁晓黎

    2015-01-01

    Owing to the rapid development of animation industry under the background of the current“broad animation”,animation specialty which has undertaken the burden of training animation talents,also needs continuous reform and innovation in many aspects:training targets,teaching phi-losophy,teaching content,teaching management and faculty team,so as to form own distinctive char-acteristics and brand effect.Taking the animation specialty of Jingling Institute of Technology as an example,from the characteristics of the current broad animation industry development and the neces-sity of professional branding construction to think over,this article has the benchmarking analysis on animation specialty with the first-class universities,and attempts to have an exploratory research on the strategy of the brand building of the animation specialty.%当前“大动画”产业发展日新月异,承担培养动画人才重任的高校也需要在人才培养目标、教学理念、教学内容、教学管理、师资队伍等多个方面不断改革创新,形成自己鲜明的办学特色和品牌效应。对当前“大动画”产业发展的特征、动画专业品牌化建设的必要性进行了思考,以金陵科技学院动画专业为例,并与一流高校动画专业进行对标分析,对动画专业品牌化建设的策略进行了探讨。

  8. 2014 CRL Build Study of Life Insurance Applicants.

    Science.gov (United States)

    Fulks, Michael; Dolan, Vera F; Stout, Robert L

    2016-01-01

    Objective .- Determine the impact of build on insurance applicant mortality accounting for smoking, laboratory test values and blood pressure. Method .- The study consisted of 2,051,370 applicants tested at Clinical Reference Laboratory between 1993 and 2007 with build and cotinine measurements available whose body mass index (BMI) was between 15 and 47. Vital status was determined as of September, 2011 by the Social Security Death Master File. Excluded from the primary study were applicants with HbA1c values ≥6.5%, systolic BP ≥141 mmHg, albumin values ≤3.3 g/dL or total cholesterol values ≤130 mg/dL. Relative mortality was determined by Cox regression analysis for bands of BMI split by age, sex and smoking status (urine cotinine positive). Results .- A majority of applicants had BMI >24 (overweight or obese by WHO criteria). After the exclusions noted above, relative mortality does not increase by >34% unless BMI is 34. BMI values in the range of 22 to 24 and 25 to 29, overall, had similar and the lowest relative risks. For most nonsmokers, risk was lowest in the lower of these two BMI bands but for smokers (and non-smoking males age 60 to 89) risk was lowest in the higher BMI band. Additional analysis showed limited reduction in relative risk by accounting for all laboratory test values as well as continuing the exclusions. Eliminating the exclusions resulted in only a modest increase in relative risk because the mortality rate of the reference band increased as well. Conclusion .- After excluding elevated HbA1c and blood pressure (associated with high BMI) and low albumin and cholesterol (associated with low BMI) which are usually evaluated separately, mortality varies by a limited degree for BMI 20 to 34. Accounting for the mortality impact of other test values, in addition to the exclusions noted, reduced mortality associated with high BMI to a limited extent, but had little impact on mortality associated with low BMI.

  9. Building America Case Study: Rehabilitation of USDA Multifamily Homes, Georgia (Climate Zones 2-4)

    Energy Technology Data Exchange (ETDEWEB)

    2016-04-01

    Rea Ventures Group, LLC, (Rea Ventures) partnered with Southface Energy Institute (Southface) on the rehabilitation of 418 low-income rental multifamily apartments located at 14 different properties in Georgia (Climate Zones 2-4). These 22-year old, individually-metered units were arranged in rowhouse or townhouse style units. Rehabilitation plans were developed using a process prescribed by the US Department of Agriculture (USDA) Rural Development program, who partially funded the building upgrades. The USDA is responsible for building, upgrading, and subsidizing housing in rural areas nationwide. In 2012, over $100 million was allocated in grants and loans. Due to the unique financing mechanism as well as long-term ownership requirements, property owners are especially motivated to invest in upgrades that will increase durability and tenant retention. These buildings represent a large stock of rural affordable housing that have the potential for significant energy and cost savings for property owners and tenants. Southface analyzed the energy upgrade potential of one stereotypical property in the Rea Ventures portfolio. This study will provide insight into the most cost-effective, implementable energy efficiency and durability upgrades for this age multifamily housing, having an enormous impact not only on the portfolio of Rea Ventures but on the vast USDA and larger Federal portfolio. Additionally, Southface will identify gaps in the current capital needs assessment process, examine available audit and simulation tools and protocols, and evaluate additional auditor training or certification needs.

  10. Solar cooling - comparative study between thermal and electrical use in industrial buildings

    Science.gov (United States)

    Badea, N.; Badea, G. V.; Epureanu, A.; Frumuşanu, G.

    2016-08-01

    The increase in the share of renewable energy sources together with the emphasis on the need for energy security bring to a spotlight the field of trigeneration autonomous microsystems, as a solution to cover the energy consumptions, not only for isolated industrial buildings, but also for industrial buildings located in urban areas. The use of solar energy for cooling has been taken into account to offer a cooling comfort in the building. Cooling and air- conditioned production are current applications promoting the use of solar energy technologies. Solar cooling systems can be classified, depending on the used energy, in electrical systems using mechanical compression chillers and systems using thermal compression by absorption or adsorption. This comparative study presents the main strengths and weaknesses of solar cooling obtained: i) through the transformation of heat resulted from thermal solar panels combined with adsorption chillers, and ii) through the multiple conversion of electricity - photovoltaic panels - battery - inverter - combined with mechanical compression chillers. Both solutions are analyzed from the standpoints of energy efficiency, dynamic performances (demand response), and costs sizes. At the end of the paper, experimental results obtained in the climatic condition of Galafi city, Romania, are presented.

  11. Characterising the Actual Thermal Performance of Buildings: Current Results of Common Exercises Performed in the Framework of the IEA EBC Annex 58-Project

    DEFF Research Database (Denmark)

    Roels, Staf; Bacher, Peder; Bauwens, Geert

    2015-01-01

    Several studies have shown that actual thermal performance of buildings after construction may deviate significantly from that anticipated at design stage. As a result, there is growing interest in full scale testing of components and whole buildings. The IEA EBC Annex 58-project ‘Reliable Buildi...

  12. Understanding Human Perception of Building Categories in Virtual 3d Cities - a User Study

    Science.gov (United States)

    Tutzauer, P.; Becker, S.; Niese, T.; Deussen, O.; Fritsch, D.

    2016-06-01

    Virtual 3D cities are becoming increasingly important as a means of visually communicating diverse urban-related information. To get a deeper understanding of a human's cognitive experience of virtual 3D cities, this paper presents a user study on the human ability to perceive building categories (e.g. residential home, office building, building with shops etc.) from geometric 3D building representations. The study reveals various dependencies between geometric properties of the 3D representations and the perceptibility of the building categories. Knowledge about which geometries are relevant, helpful or obstructive for perceiving a specific building category is derived. The importance and usability of such knowledge is demonstrated based on a perception-guided 3D building abstraction process.

  13. Validation studies of the DOE-2 Building Energy Simulation Program. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, R.; Winkelmann, F.

    1998-06-01

    . Until building simulation programs can get this data directly from CAD programs, such detail would negate the usefulness of the program for the practicing engineers and architects who currently use the program. In addition, the validation studies discussed herein indicate that such detail is really unnecessary. The comparison of calculated and measured quantities have resulted in a satisfactory level of confidence that is sufficient for continued use of the DOE-2 program. However, additional validation is warranted, particularly at the component level, to further improve the program.

  14. Study on prevention of spread of vertical fire along finishing materials for external wall of high-rise buildings

    Directory of Open Access Journals (Sweden)

    Yoo Yong Ho

    2013-11-01

    Full Text Available Although there are laws in the Korea Building Act relating to exterior finishing materials, fireproof structures and fire-stop of curtain wall structures, the standards relating to and test methods on securing detailed fire safety functions for exterior materials of all buildings including high-rise buildings have not been prepared. This is due to the fact that test methods and standards to quantitatively evaluate the vertical fire spread of the exterior material of buildings do not exist. In addition, while semi non-combustible materials or non-combustible materials are required to be used to prevent fire spread in buildings which exceed 30-stories, it is necessary to review the standards and regulations in cases where fire blocking systems, capable of preventing the vertical fire spread within the curtain wall, are installed to consider permitting the utilization of fire retardant material following an assessment of the construction characteristics of high-rise buildings. The functional evaluation standards and test methods on the vertical fire spread introduced in this study will be a more effective method for performing evaluations to prevent fire spread compared to the currently utilized method of performing small scale tests.

  15. A Study To Determine The Quality Of Building Stock And Earthquake Risk In Kirsehir

    Directory of Open Access Journals (Sweden)

    Mehmet Mustafa nal

    2015-08-01

    Full Text Available Technological developments findings and associated improvement of structural codes together with the change in the earthquake potentials and deficiencies of the old buildings necessitate the evaluation of the present building stocks. Both the Earthquake Regulations and the Seismic Zoning Map in Turkey have been going through a fast change in the recent years. Furthermore the fact that the structural damage due to the recent earthquakes did not change according to the regions which is indicative of the building stock with low structural quality. Kirsehir is one of these regions with low quality buliding stock. Kirsehir is a developing region in relation to the increase in population and number of buildings in recent years. Accordingly the heights of the buildings also increase in relation to the improving economical conditions. In contrary to the older masonry buildings of 1950s the newer buildings are manufacturing using reinforced concrete. However the lack of control mechanisms designs according to lower eqarthquake risks without considering the the soil- structure relationship also make the more recent buildings prone to earthquake damage. In this study the building stock in Kirsehir and its close surroundings constructed before 1998 was considered and grouped in relation to their floor numbers construction methods and some other properties. The performance analyses of the considered buildings were performed by taking into account the local soil conditions and construction material. Then the earthquake risks of these buildings are calculated.

  16. Maintaining turbidity and current flow in laboratory aquarium studies, a case study using Sabellaria spinulosa

    DEFF Research Database (Denmark)

    Davies, Andrew J.; S. Last, Kim; Attard, Karl

    2009-01-01

    Many aquatic organisms rely on the suspension of particulate matter for food or for building materials, yet these conditions are difficult to replicate in laboratory mesocosms. Consequently, husbandry and experimental conditions may often be sub-optimal. The Vortex Resuspension Tank (Vo......RT) is a simple and reliable system for the resuspension of food or sediments using an enclosed airlift. The particle rain from the lift is mixed in the tank by two water inputs that provide directional current flow across the study organism(s). The vortex mixing creates a turbulent lateral water flow that allows...... whereas under intermediate and high sediment rates there was consistent cumulative growth throughout a 15 d experiment. This highlights the importance of suspended sediment for S. spinulosa and also the suitability of the VoRT system for maintaining organisms with suspended matter requirements....

  17. Theoretical studies of non inductive current drive in compact toroids

    NARCIS (Netherlands)

    Farengo, R; Lifschitz, AF; Caputi, KI; Arista, NR; Clemente, RA

    2002-01-01

    Three non inductive current drive methods that can be applied to compact toroids axe studied. The use of neutral beams to drive current in field reversed configurations and spheromaks is studied using a Monte Carlo code that includes a complete ionization package and follows the exact particle orbit

  18. Sustainable solutions for cooling systems in residential buildings: case study in the Western Cape Province, South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Foudzai, F.; M' Rithaa, M. [Cape Peninsula University of Technology, Cape Town (South Africa). Dept. of Industrial Design

    2010-07-01

    The energy demand in building sectors for summer air-conditioning is growing exponentially due to thermal loads, increased living standards and occupant comfort demands throughout the last decades. This increasing consumption of primary energy is contributing significantly to emission of greenhouse gases and therefore to global warming. Moreover, fossil fuels, current main sources of energy used for electricity generation, are being depleted at an alarming rate despite continued warning. In addition, most air-conditioning equipment still utilise CFCs, promoting further destruction of our planet's protective ozone layer. Concerns over these environmental changes, have begun shifting the emphasis from current cooling methods, to 'sustainable strategies' of achieving equally comfortable conditions in building interiors. Study of ancient strategies applied by vernacular architecture shows how the indigenously clean energies to satisfy the cooling need were used. One of the most important influences on vernacular architecture is the macro-climate of the area in which the building is constructed. Mediterranean vernacular architecture, as well as that of much of the Middle East, often includes a courtyard with a fountain or pond; air cooled by water mist and evaporation is drawn through the building by the natural ventilation set up by the building form, and in many cases also includes wind-catchers to draw air through the internal spaces. Similarly, Northern African vernacular designs often have very high thermal mass and small windows to keep the occupants cool. Not only vernacular structure but also the recent development in solar and geothermal cooling technologies could be used to the needs for environmental control. Intelligent coupling of these methods as alternative design strategies could help developing countries such as South Africa toward sustainable development in airconditioning of building. In this paper, the possible strategies for

  19. K/M Associates: A Case Study in Systems Building.

    Science.gov (United States)

    Boice, John R., Ed.

    One of the newest developments in building is the application of systems analysis to design and construction. The systems approach depends heavily on the use of prefabricated components and modular subsystems, in both design and construction processes. Construction times are shortened and costs often lowered because the flexibility of…

  20. Preliminary study on impact assessment of climate change on building risks induced by typhoons in Japan

    DEFF Research Database (Denmark)

    Nishijima, Kazuyoshi; Maruyama, Takashi; Graf, Mathias

    The present paper investigates possible impacts of the climate change on building risks caused by typhoons. The inputs to this investigation are: (1) outcomes from the numerical simulations with a Global Climate Model (GCM) developed under the framework of the KAKUSHIN program, (2) statistics...... on building damage in the event of Typhoon Songda, and (3) numerical simulation of the wind field induced by the typhoon Songda with the JMA Non- Hydrostatic Model (JMA-NHM). The first input is utilized to develop two sets of probabilistic typhoon models; i.e. corresponding to the current climate...... and the future climate subject to the climate change, whereas the other inputs are utilized to develop a model for structural performance of buildings. Taking basis in these models, changes of building risks under the climate change are investigated. The result shows that the building risks slightly decrease...

  1. Preliminary study on impact assessment of climate change on building risks induced by typhoons in Japan

    DEFF Research Database (Denmark)

    Nishijima, Kazuyoshi; Maruyama, Takashi; Graf, Mathias

    The present paper investigates possible impacts of the climate change on building risks caused by typhoons. The inputs to this investigation are: (1) outcomes from the numerical simulations with a Global Climate Model (GCM) developed under the framework of the KAKUSHIN program, (2) statistics...... on building damage in the event of Typhoon Songda, and (3) numerical simulation of the wind field induced by the typhoon Songda with the JMA Non- Hydrostatic Model (JMA-NHM). The first input is utilized to develop two sets of probabilistic typhoon models; i.e. corresponding to the current climate...... and the future climate subject to the climate change, whereas the other inputs are utilized to develop a model for structural performance of buildings. Taking basis in these models, changes of building risks under the climate change are investigated. The result shows that the building risks slightly decrease...

  2. Valuation of Building strength against earthquake Vibrations using Microtremor Analysis (case study: the city of Surabaya)

    Science.gov (United States)

    Bahri, A. S.; Utama, W.; Aini, D. N.; Lutfie, M. N.

    2016-01-01

    The potential damage due to earthquakes is not only identified by the magnitude and the epicenter distance to a particular region, but also by the topography and it's near surface geological condition. In the inhabited area, such as the urban locations, it is necessary to assess buildings against the earthquake vibration. For this purpose the microtremor vibration analysis was conducted in the city of Surabaya, in order to determine the earthquake-prone buildings and their vulnerability against the vibrations induced by earthquake. The possibility of resonance structure-soil in this specific area was also studied. The microtremor on grounds was analyzed using the Horizontal to Vertical Spectral Ratio (HVSR) and the microtremor inside the buildings was analyzed using the spectrum analysis method, the Floor Spectral Ratio (FSR) and the Random Decrement Method (RDM). This study was performed on ten-borne buildings throughout the region, which represent the one-story buildings, governmental buildings, historic buildings and public buildings. We found that from these buildings, seven of them have low-level, two have low- to medium-level of resonance, and one has a high-level of resonance. The minimum building vulnerability index in the horizontal direction EW (East- West) is 4.55 and in the NS direction (North-South) is 4.14. The maximum vulnerability index was found in the horizontal direction EW (East-West) and the NS directions, which amounts to 143.47 and 171.233.

  3. Positional Accuracy Assessment of the Openstreetmap Buildings Layer Through Automatic Homologous Pairs Detection: the Method and a Case Study

    Science.gov (United States)

    Brovelli, M. A.; Minghini, M.; Molinari, M. E.; Zamboni, G.

    2016-06-01

    OpenStreetMap (OSM) is currently the largest openly licensed collection of geospatial data. Being OSM increasingly exploited in a variety of applications, research has placed great attention on the assessment of its quality. This work focuses on assessing the quality of OSM buildings. While most of the studies available in literature are limited to the evaluation of OSM building completeness, this work proposes an original approach to assess the positional accuracy of OSM buildings based on comparison with a reference dataset. The comparison relies on a quasi-automated detection of homologous pairs on the two datasets. Based on the homologous pairs found, warping algorithms like e.g. affine transformations and multi-resolution splines can be applied to the OSM buildings to generate a new version having an optimal local match to the reference layer. A quality assessment of the OSM buildings of Milan Municipality (Northern Italy), having an area of about 180 km2, is then presented. After computing some measures of completeness, the algorithm based on homologous points is run using the building layer of the official vector cartography of Milan Municipality as the reference dataset. Approximately 100000 homologous points are found, which show a systematic translation of about 0.4 m on both the X and Y directions and a mean distance of about 0.8 m between the datasets. Besides its efficiency and high degree of automation, the algorithm generates a warped version of OSM buildings which, having by definition a closest match to the reference buildings, can be eventually integrated in the OSM database.

  4. Elastic-plastic study on high building with SRC transferring story

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A new type of transferring structure for steel reinforced concrete (SRC) beams is used in high building. The pushover analysis method was used to study the failure mechanism and ductility of SRC transferring structure through consulting pseudo-static test results for the structure. And, the occurrence order and position of the plastic hinge, the weak story and seismic capacity of high building with SRC transferring story were also studied through consulting shaking table test results for the high building, showing that the seismic behavior of high building with SRC transferring story is good.

  5. Building Information Modeling (BIM in Iran: An Exploratory Study

    Directory of Open Access Journals (Sweden)

    M. Reza Hosseini

    2016-07-01

    Full Text Available BIM has received considerable attention from academics and innovative construction companies in recent years within the Iranian context. However, there is a conspicuous lack of studies, which give a picture of the current state of BIM in Iran. To address this gap in the body of the knowledge, this study intends to present an account on the current state of BIM with a focus on barriers and drivers associated with its adoption in Iran based on the perceptions of Iranian construction practitioners. Drawing upon a questionnaire survey completed by 44 construction practitioners and through deploying data visualization alongside statistical analyses, it came to light that industry practitioners in Iran are inexperienced as to BIM’s use and the level of BIM implementation in the country is at the lowest level of BIM maturity. That is, 29.5% of construction companies are involved in some level of BIM adoption whereas 56.8% have had no exposure to BIM and 36.4% do not even have any plans to adopt BIM in the near future. The findings also showed that the highest ranked barriers to adoption of BIM in Iran are almost entirely associated with the structure of the Iranian market, the nature of the construction industry and the predominant business environment in the country as well as lack of attention by policy makers and the government. On the other hand, major drivers were found to be associated with monetary gains and enhancing competitiveness in the market. The clear message is that widespread adoption of BIM in Iran will not occur in the absence of a supportive regulatory environment and financial assistance by policy makers. The paper contributes to the field by sharing the preliminary findings of the first study conducted on BIM adoption in Iran, which provides a sound basis for further inquiries on the topic.

  6. The Current Situation of the Lighting for Residential Buildings in Taiwan%台湾地区住宅照明现况

    Institute of Scientific and Technical Information of China (English)

    周鼎金

    2001-01-01

    本文对台北市、台中市、高雄市等都会城市住宅照明现况进行了调查,从而提出了今后住宅照明的发展方向。%The author has made an investigation on the current situation of the lighting for residential buildings in the cities such as Taibei, Taizhong and Gaoxiong of Taiwan. As a result of it, in this paper he has put forward a furture development trend of the lighting for residential buildings.

  7. Design and Construction Process of Two LEED Certified University Buildings: A Collective Case Study

    Science.gov (United States)

    Rich, Kim

    2011-01-01

    This study was conducted at the early stages of integrating LEED into the design process in which a clearer understanding of what sustainable and ecological design was about became evident through the duration of designing and building of two academic buildings on a university campus. In this case study, due to utilizing a grounded theory…

  8. Coaching at the Building Site – A Feasibility Study

    DEFF Research Database (Denmark)

    Koch, Christian; Alsdorf, Morten; Sander, Dag

    2006-01-01

    Coaching has become widely used in business, and is well described. However it is rarely used in construction. This makes a contrast to the poor performance of site interaction, leading to a vast amount of reported cooperation and coordination problems. This paper investigates the feasibility...... of a coaching approach to site management. The coach is a person who helps and guides another person or group to maximize his /their own capacity. Coaching arguably is useful in many different work situations, for example problem solving, group working and planning. These assumptions are evaluated through...... observations in a building site operating with lean construction, where the managers did not use coaching consciously in their interaction with employees. 29 participant observations of five of the managers at the building site were carried out, at individual- and group meetings. Coaching can be used...

  9. Facts and Narrative - the Concept of 4d Capturing of Heritage Building; a Case Study of Sompur Mahavihara, Bangladesh

    Science.gov (United States)

    Rashid, Md. M.; Rahaman, H.

    2013-07-01

    This study embarked upon a premise that considers architecture of building as a dynamic phenomenon. A building from its conception is susceptible to change due to various reasons. An historical building that is several hundred years old must have undergone through changes due to political, social, religious and most importantly functional reasons. Hence capturing building and its dynamic evolution is necessary to appreciate its architecture as well as its heritage value. Whereas the conventional method of fact based historiography only captures the building in particular moment. It makes architectural historians to become perplexed over to which particular moment to be documented. It is a great challenge for the architectural historians to bring back these dynamic characters of the building that are mostly inconspicuous in nature from this point of time. In this situation the historical discourse also remains elusive and blurred. The idea of 4d capturing comes in front in this scenario. Current research would venture into this emerging idea to record the architecture of the early period. This paper highlights the need for a flexible tool to capture this dynamic character of the building. By citing the case study of the 7th century Buddhist Monastery in Bengal, this paper thus argues for the need of capturing the narrative of a historical building than the facts to get a complete picture of its architecture. This study aims at capturing the narrative of Sompur Mahavihara, the UNESCO World Heritage site in Bangladesh, which is currently in ruinous condition. However, it's few hundred years life suggests that as architecture it was subject to change due to different reasons, mainly political, religious and rituals. Being a monument that belongs to the flourishing phase of a society, traditionally this monastery architecture certainly played a role as a stage for religious and political pageantry as well as different religious performances. As architecture it works as

  10. Reviewing Green roof design approaches: Case study of residential buildings

    OpenAIRE

    Özarısoy, Bertuğ

    2013-01-01

    ABSTRACT: High density of the residential areas and steep land value in the cities have driven people to maximize liveable and productive spaces in urban settings. This includes the reinvention of roof functions extending merely as a protection from the elements to a platform of housing green building technologies such as green roofs. Increased interest in green roofs have led to advances in technology. An entire industry has sprung up which specializes in lightweight growing materials, ro...

  11. Information Value and Externalities in Reputation Building - An Experimental Study

    OpenAIRE

    Gary E. Bolton; Axel Ockenfels

    2007-01-01

    In sequential equilibrium theory, reputation building is independent of whether the reputation builder is matched with one long-run player or a series of short run players. We observe, however, that reputation builders are significantly more challenged by long-run players in both laboratory chain store and buyer-seller games. Reputation builder behavior is not as unpredictable as required by the mixed equilibrium strategies and so information about the reputation builder’s past behavior has m...

  12. Information Value and Externalities in Reputation Building - An Experimental Study

    OpenAIRE

    Gary E Bolton; Axel Ockenfels

    2007-01-01

    In sequential equilibrium theory, reputation building is independent of whether the reputation builder is matched with one long-run player or a series of short run players. We observe, however, that reputation builders are significantly more challenged by long-run players in both laboratory chain store and buyer-seller games. Reputation builder behavior is not as unpredictable as required by the mixed equilibrium strategies and so information about the reputation builder’s past behavior has m...

  13. A Study on Problems Arises in Practicing Fire Drill in High Rise Building in Kuala Lumpur

    Directory of Open Access Journals (Sweden)

    Zahari N.F.

    2014-01-01

    Full Text Available Fire drill is one of the steps taken to mitigate the risk trapped in a building during outbreak of fire. Hence, it is very important for every building to practice fire drill, especially high-rise building. Referring to Fire and Rescue Department of Malaysia(BOMBA, high-rise building had a higher risk compared to other type of buildings. However, there might be problems arise to practice fire drill especially in high-rise building. This research intends to study on fire drill procedure and identify any possible common problems arises when practicing fire drill in high-rise building in Kuala Lumpur. Information was gained through regulations and guidelines associated with fire drill procedure and also parties involved in the practice. Besides, a survey is done for awareness of occupants in high-rise building on fire drill practice. For the case study, three high-rise building are selected in Kuala Lumpur based on specific criteria. Analysis for this research comprises of comparative and descriptive approach as well as statistical analysis which are documented based on case studies and questionnaire survey. The findings indicates that there is no standardized procedure in fire drill, while the most common problems that can be seen in practicing fire drill are lack of commitment among occupants, lack of information on fire drill and output on weaknesses after fire drill been practiced.

  14. A guide for building biological pathways along with two case studies: hair and breast development.

    Science.gov (United States)

    Trindade, Daniel; Orsine, Lissur A; Barbosa-Silva, Adriano; Donnard, Elisa R; Ortega, J Miguel

    2015-03-01

    Genomic information is being underlined in the format of biological pathways. Building these biological pathways is an ongoing demand and benefits from methods for extracting information from biomedical literature with the aid of text-mining tools. Here we hopefully guide you in the attempt of building a customized pathway or chart representation of a system. Our manual is based on a group of software designed to look at biointeractions in a set of abstracts retrieved from PubMed. However, they aim to support the work of someone with biological background, who does not need to be an expert on the subject and will play the role of manual curator while designing the representation of the system, the pathway. We therefore illustrate with two challenging case studies: hair and breast development. They were chosen for focusing on recent acquisitions of human evolution. We produced sub-pathways for each study, representing different phases of development. Differently from most charts present in current databases, we present detailed descriptions, which will additionally guide PESCADOR users along the process. The implementation as a web interface makes PESCADOR a unique tool for guiding the user along the biointeractions, which will constitute a novel pathway.

  15. Study of Surface Displacements on Tunnelling under Buildings Using 3DEC Numerical Modelling

    Science.gov (United States)

    Rebello, Nalini; Sastry, V. R.

    2014-01-01

    Underground structures at shallow depths are often constructed for metro lines, either in loose or dense layered soils. Tunnelling in urban areas is predominantly under surface structures and on tunnelling, innumerable changes in the form of distortion take place in strata surrounding the tunnel. Extent of displacement/damage to buildings or the tunnel-soil structure interaction depends on the type of building and nature of strata. Effect on displacements has been less studied in granular soils compared to other types of soils like clays. In this paper, parametric studies are conducted to find the displacements at surface, in granular soil conditions, due to varying building storeys and building eccentricities from the tunnel centre line. Effect of presence of geosynthetic layer under footings is further studied. Prior to the parametric studies, validity of the model used is checked with field data available for a stretch of tunnel in South India. Results of simulation studies reveal that inclusion of building reduces displacements at the surface in the dense strata. In very dense strata, the displacements increase as compared to the case without a building. As the centre of the building moves away from the tunnel centre line, settlement above the tunnel matches displacements in the case without building. Applicability of 3DEC software is checked with respect to the present study. PMID:27437472

  16. Study of a fibre optics current sensor for the measurement of plasma current in ITER

    Science.gov (United States)

    Wuilpart, Marc; Vanus, Benoit; Andrasan, Alina; Gusarov, Andrei; Moreau, Philippe; Mégret, Patrice

    2016-05-01

    In this article, we study the feasibility of using a fibre-optics current sensor (FOCS) for the measurement of plasma current in the future fusion reactor ITER. The sensor is based on a classical FOCS interrogator involving the measurement of the state of polarization rotation undergone by the light in presence of a magnetic field (Faraday effect) in an optical fibre surrounding the current and terminated by a Faraday mirror. We considered a uniformly spun optical fibre as the sensing element and we used the Stokes formalism to simulate the sensor. The objective of the simulations is to quantify the ratio LB/SP (beat length over the spun period of the spun fibre) enabling a measurement error in agreement with the ITER specifications. The simulator takes into account the temperature variations undergone by the measurement system under ITER operation. The simulation work showed that a LB/SP ratio of 19.2 is adequate.

  17. Experimental study of the dynamics of a thin current sheet

    Science.gov (United States)

    Gekelman, W.; DeHaas, T.; Van Compernolle, B.; Daughton, W.; Pribyl, P.; Vincena, S.; Hong, D.

    2016-05-01

    Many plasmas in natural settings or in laboratory experiments carry currents. In magnetized plasmas the currents can be narrow field-aligned filaments as small as the electron inertial length ≤ft(\\tfrac{c}{{ω }pe}\\right) in the transverse dimension or fill the entire plasma column. Currents can take the form of sheets, again with the transverse dimension the narrow one. Are laminar sheets of electric current in a magnetized plasma stable? This became an important issue in the 1960s when current-carrying plasmas became key in the quest for thermonuclear fusion. The subject is still under study today. The conditions necessary for the onset for tearing are known, the key issue is that of the final state. Is there a final state? One possibility is a collection of stable tubes of current. On the other hand, is the interaction between the current filaments which are the byproduct endless, or does it go on to become chaotic? The subject of three-dimensional current systems is intriguing, rich in a variety of phenomena on multiple scale sizes and frequencies, and relevant to fusion studies, solar physics, space plasmas and astrophysical phenomena. In this study a long (δz = 11 m) and narrow (δx = 1 cm, δy = 20 cm) current sheet is generated in a background magnetoplasma capable of supporting Alfvén waves. The current is observed to rapidly tear into a series of magnetic islands when viewed in a cross-sectional plane, but they are in essence three-dimensional flux ropes. At the onset of the current, magnetic field line reconnection is observed between the flux ropes. The sheet on the whole is kink-unstable, and after kinking exhibits large-scale, low-frequency (f ≪ f ci ) rotation about the background field with an amplitude that grows with distance from the source of the current. Three-dimensional data of the magnetic and electric fields is acquired throughout the duration of the experiment and the parallel resistivity is derived from it. The parallel

  18. IMPACT ON THE APPLICATION OF INSULATION IN BUILDINGS TO ACHIEVE THERMAL COMFORT (A CASE STUDY: LAUSER OFFICE BUILDING IN BANDA ACEH

    Directory of Open Access Journals (Sweden)

    Nova Purnama Lisa

    2014-12-01

    Full Text Available From the results of research studies on the impact of the use of insulation in buildings, reducing solar radiation on buildings to improve indoor comfort by applying the Principles of radiation reduction in buildings naturally using insulation application that serves as an insulator against the building materials, use of thermal insulation in particular mounted on the roof of the building and the walls are located on second floor and the third floor Lauser office building, Calculate the cooling load for each room that was on second floor and the third floor based on the geographical location or position of the building, climate data, building material data , and the intensity of the spatial characteristics which include lighting, solar radiation, user activity and electrical appliances being used. The calculation is done with the help of Ecotech v.5, 2011. The location and position on the third floor of a building with a flat roof cast concrete, so that the heat absorbed by the platform, and two times greater than the amount of heat radiation is absorbed by the material in the direction of the light falling the sun is at an angle <30°C. The simulation results on the building with the addition of thermal insulation on all walls and the roof of the inside of the foam material ultrafolmadehid, without changing the model building and similar activities in accordance with the existing condition and the condition of the room using the air conditioner at a temperature of 18-26°C, indicating a decrease in cooling load signifinikan in any space reaches 40% of the total cooling load required on the lauser office building. Comparing the simulation results Ecotech temperature v.5 2011 with field measurements as a validation of the simulation results in order to achieve thermal comfort in buildings and can menggurangi use energy consumption in buildings and can be used as a reference in planning space-based conditioning systems energy efficient.

  19. An arctic low-energy house as experimental setup for studies of heat dynamics of buildings

    DEFF Research Database (Denmark)

    Andersen, Philip Hvidthøft Delff; Rode, Carsten; Madsen, Henrik

    2013-01-01

    and weather data. Dynamical methods separate influences from outdoor temperature, solar radiation, and wind on the energy consumption in the building. The studied building is a low-energy house in Sisimiut, Greenland. Weather conditions like large temperature differences between indoors and outdoors...

  20. The Army Family Team Building Program: Facilitating a Transformative Learning Process--An Intrinsic Case Study

    Science.gov (United States)

    Gall, Joseph A.

    2009-01-01

    This study sought to understand how the Army Family Team Building program influences self-reliance and self-sufficiency in Army spouses as they integrate into the Army community. The purpose of the Army Family Team Building program is to empower Army spouses with knowledge and skills, which foster well-being and improve quality of life. The…

  1. Between Silence and Salience. A Multimethod Model to Study Frame Building from a Journalistic Perspective

    NARCIS (Netherlands)

    Boesman, J.L.J.; Van Gorp, B.; Haenens, d' L.

    2016-01-01

    Research into frame building, which aims to investigate the development of news framing in the journalistic realm, is on the rise. While most frame-building studies focus on the relative contribution of journalists or sources to news frames, this article presents and evaluates an integrated methodol

  2. How Macromedia Used Blogs to Build Its Developers' Communities: A Case Study

    Science.gov (United States)

    Cheng, Jingli

    2008-01-01

    Business organizations are using blogs as a conversational technology to help build a community of practice where knowledge exchange and sharing actively take place. This case study examines how Macromedia used blogs to build its developers' communities and become more organizationally effective. Four major types of interactions between the…

  3. DOE's Public Database for Green Building Case Studies: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Torcellini, P. A.; Crawley, D. B.

    2003-11-01

    To help capture valuable information on''green building'' case studies, the U.S. Department of Energy has created an online database for collecting, standardizing, and disseminating information about high-performance, green projects. Type of information collected includes green features, design processes, energy performance, and comparison to other high-performance, green buildings.

  4. Development of an Online Toolkit for Measuring Commercial Building Energy Efficiency Performance -- Scoping Study

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na

    2013-03-13

    This study analyzes the market needs for building performance evaluation tools. It identifies the existing gaps and provides a roadmap for the U.S. Department of Energy (DOE) to develop a toolkit with which to optimize energy performance of a commercial building over its life cycle.

  5. Study on Significant Mechanisms of Maintenance Culture Among Public Building Users in Malaysia

    Directory of Open Access Journals (Sweden)

    Binti Rusli Ezzatul Aifa

    2014-01-01

    Full Text Available Malaysia, a country in Asia, is a fast-growing developing country in its construction so as to fulfil the demands of today. Many buildings, infrastructures and facilities were constructed; however, the necessary support required after construction was disregarded. Maintenance is the key for the system, and culture is the main point of attitude and behaviour towards the maintenance culture. Becoming one of the first class infrastructures in the world is the vision that Malaysia is striving to achieve, and a third mentality from society and organisations should be avoided. However, to achieve this vision, proper maintenance is not enough; a maintenance culture should be applied. Developing a maintenance culture will help obtain the vision quickly and increase the quality of productivity in maintenance. It will also reduce the repair cost and increase responsibility. Malaysia is becoming a first class infrastructure, which is the vision for today; therefore, it needs to avoid a third mentality. Concerning this matter, decisive components of the maintenance culture were studied to identify the types of components that influence the maintenance culture among public building users. The decisive components of maintenance were uncertainty awareness and responsibility; personality/human behaviour and attitude; mind-set/motivation; training; knowledge and learning process; culture trends; management commitment; management of organisation; leadership; fundamental and policy; operating system organisation; the enforcement; laws and rules; and current practice of maintenance methods.

  6. Use of the building envelope for decentral solar current generation in the grid; Nutzung der Gebaeudehuelle zur dezentralen solaren Stromerzeugung im Netzverbund

    Energy Technology Data Exchange (ETDEWEB)

    Neuner, R. [SCHOTT Solar GmbH, Alzenau (Germany). PV Building Solutions

    2008-07-01

    SCHOTT Solar is the manufacturer of wafers, solar cells and solar current modules. It also produces power modules for all relevant applications and provides modules and components for the building integration of photovoltaic systems (BIPV). The solar current technology photovoltaic system (PV) will take a top position in the network with the other innovative technologies and products for using the preference energy carriers ''solar energy, wind power, biomass and water power''. More than 70% of the solar current applications worldwide are already ''building-oriented''. However, clearly less then 1% are ''building-integrated'' in terms of their function. Solar current power modules in standard geometrics and standard design are predominantly assembled and operated on inclined and flat roofs above the conventional roofing material as additional independent energy systems in the grid. Measured, i.e. non-standardised modules for facade integration and glass roofing, e.g. of train station halls or entry portals are becoming more interesting for architects and city planners. Free surface plants are justified for large plant construction of photovoltaic systems in the power segment - typically above 200 kWp and a surface demand of more than 2,000 m-2 per system. Based on the primary energy solar power the building envelope is the carrier of corresponding solar-technical energy converters in times of decentral energy generation and supply. Apart from the passive use of the solar radiation energy the active solar current technology ''photovoltaic'' plays a predominant role. The operators of photovoltaic plants, private and public investors, architects and planners expect financial planning security of appropriate photovoltaic input tariffs as well as high production security. Solar current plants with high-quality photovoltaic components offer amongst other the chance (1) to extend the decentral

  7. Associations of indoor carbon dioxide concentrations and environmental susceptibilities with mucous membrane and lower respiratory building related symptoms in the BASE study: Analyses of the 100 building dataset

    Energy Technology Data Exchange (ETDEWEB)

    Erdmann, Christine A.; Apte, Michael G.

    2003-09-01

    Using the US EPA 100 office-building BASE Study dataset, they conducted multivariate logistic regression analyses to quantify the relationship between indoor CO{sub 2} concentrations (dCO{sub 2}) and mucous membrane (MM) and lower respiratory system (LResp) building related symptoms, adjusting for age, sex, smoking status, presence of carpet in workspace, thermal exposure, relative humidity, and a marker for entrained automobile exhaust. In addition, they tested the hypothesis that certain environmentally-mediated health conditions (e.g., allergies and asthma) confer increased susceptibility to building related symptoms within office buildings. Adjusted odds ratios (ORs) for statistically significant, dose-dependent associations (p < 0.05) for dry eyes, sore throat, nose/sinus congestion, and wheeze symptoms with 100 ppm increases in dCO{sub 2} ranged from 1.1 to 1.2. These results suggest that increases in the ventilation rates per person among typical office buildings will, on average, reduce the prevalence of several building related symptoms by up to 70%, even when these buildings meet the existing ASHRAE ventilation standards for office buildings. Building occupants with certain environmentally-mediated health conditions are more likely to experience building related symptoms than those without these conditions (statistically significant ORs ranged from 2 to 11).

  8. 可持续发展在当前民用建筑设计中的应用%On application of sustainable development in design for current civil buildings

    Institute of Scientific and Technical Information of China (English)

    李淑林

    2012-01-01

    Combining with current energy circumstance in China, the study analyzes the important significance for the sustainable development design idea for civil buildings, puts forward the appIicative measures from aspects of energy-saving, ecology and economy in design for current civil buildings, and points out the adherence to the sustainable development design idea in civil buildings should be significant for the spreading and development of low-carbon buildings.%结合当前我国能源现状,对民用建筑可持续发展设计理念的重要意义进行了分析,从节能、生态、经济的角度提出了可持续发展在当前民用建筑设计中的应用措施,指出在民用建筑中坚持可持续发展的设计理念,对促进低碳建筑的普及和发展具有重要意义。

  9. Occupant Expectations on the Main IEQ Factors at Workspace: The Studies of Private Preschool Buildings

    Directory of Open Access Journals (Sweden)

    Salleh Naziah Muhamad

    2016-01-01

    Full Text Available This study explores the relationship between the perceived performance of specific IEQ factors and occupants’ overall satisfaction with their workspace. The Indoor Environmental Quality (IEQ in buildings is one of the most important factors affecting the physical development of children. The early education is compulsory and escalated numbers of 4-6 years children has boosted the numbers of private preschool. Frequently its operate in premises that have been fully refurbished, either in housing schemes, commercial buildings or institutional buildings. This has invited the questions on the building capability to provide a good environment to the children during the learning activities. Malaysia still lacks studies on the modification of the quality of the internal environment for private kindergartens. Post-Occupancy Evaluation (POE is one method that has been used satisfactorily in the study and effect of IEQ in kindergartens. This research focuses on identifying occupant satisfaction towards IEQ in selected refurbished pre-school or kindergarten buildings. The objectives of the study are to iden-tify and determine the IEQ through feedback from building users. The study collected data on overall satisfaction and overall design importance through building inspection and questionnaires, the data obtained was analyzed to become a benchmark for the studies. 240 kindergartens in the whole country were selected for the study of IEQ.

  10. Co-Simulation of Detailed Whole Building with the Power System to Study Smart Grid Applications

    Energy Technology Data Exchange (ETDEWEB)

    Makhmalbaf, Atefe; Fuller, Jason C.; Srivastava, Viraj; Ciraci, Selim; Daily, Jeffrey A.

    2014-12-24

    Modernization of the power system in a way that ensures a sustainable energy system is arguably one of the most pressing concerns of our time. Buildings are important components in the power system. First, they are the main consumers of electricity and secondly, they do not have constant energy demand. Conventionally, electricity has been difficult to store and should be consumed as it is generated. Therefore, maintaining the demand and supply is critical in the power system. However, to reduce the complexity of power models, buildings (i.e., end-use loads) are traditionally modeled and represented as aggregated “dumb” nodes in the power system. This means we lack effective detailed whole building energy models that can support requirements and emerging technologies of the smart power grid. To gain greater insight into the relationship between building energy demand and power system performance, it is important to constitute a co-simulation framework to support detailed building energy modeling and simulation within the power system to study capabilities promised by the modern power grid. This paper discusses ongoing work at Pacific Northwest National Laboratory and presents underlying tools and framework needed to enable co-simulation of building, building energy systems and their control in the power system to study applications such as demand response, grid-based HVAC control, and deployment of buildings for ancillary services. The optimal goal is to develop an integrated modeling and simulation platform that is flexible, reusable, and scalable. Results of this work will contribute to future building and power system studies, especially those related to the integrated ‘smart grid’. Results are also expected to advance power resiliency and local (micro) scale grid studies where several building and renewable energy systems transact energy directly. This paper also reviews some applications that can be supported and studied using the framework introduced

  11. Marginal Productivity Gained Through Prefabrication: Case Studies of Building Projects in Auckland

    Directory of Open Access Journals (Sweden)

    Wajiha Shahzad

    2015-02-01

    Full Text Available Several studies have documented benefits of prefabrication system (prefab compared to the traditional building system (TBS. However, the documented benefits have been anecdotal or fragmented with reports of isolated case study projects. Few studies have looked at the objectively quantified benefits from statistical significance point of view and across building types in New Zealand. This study contributes to filling this knowledge gap by analyzing cost and time-savings, and productivity improvement achievable by the use of prefab in place of the TBS. Records of completion times and final contract values of 66 building projects implemented using prefab in Auckland were collected. The building types included commercial, houses, apartments, educational, and community buildings. The project details included final contract sums, completion dates, gross floor areas, and number of floors. Based on these details, the equivalent completion times and the final cost estimates for similar buildings implemented using the TBS were obtained from the Rawlinsons construction data handbook and feedback from some designers and contractors. Marginal productivity outcome for each building project was computed as the product of the cost and time-savings achieved using the prefab. Results showed that the use of prefab in place of TBS resulted in 34% and 19% average reductions in the completion times and costs, respectively. This also translated to overall 7% average improvement in the productivity outcomes in the building projects. Univariate ANOVA-based hypothesis test results showed that ‘building type’ had no significant effects on the cost and productivity improvement outcomes, but had significant effect on the time savings analyzed in the case study projects. The greatest productivity gain of 11% was achieved in house projects. These evidence-based results could guide optimized use of prefab for specific building application. The hypothesis-testing outcome

  12. PESANTREN, PEACE BUILDING, AND EMPOWERMENT: A Study of Community Based Peace Building Initiatives

    Directory of Open Access Journals (Sweden)

    Badrus Sholeh

    2005-08-01

    Full Text Available Pesantren telah menjadi bagian tradisi keislaman di Indonesia, yang menggabungkan kajian dan budaya Islam Timur Tengah dengan tradisi lokal. Penggabungan tradisi ini menciptakan Islam Indonesia memiliki karakter berbeda dengan Islam di Timur Tengah. Tulisan ini melihat peran pesantren lebih dekat dengan studi kasus pesantren Salafiyah Syafi’iyah Situbondo, Jawa Timur. Pesantren ini telah menjadi salah satu pesantren tertua di Indonesia, dengan peran strategis mengembangkan perdamaian dan mewarnai perjalanan peradaban di sekitarnya. Tiga kiprah pesantren menjadi perhatian utama: memediasi hubungan antar agama pasca kerusuhan Situbondo 1996, mendamaikan hubungan antara petani dan perusahaan perkebunan negara dalam pendayagunaan tanah di Bunengan dan konflik tanah di Merak. Kyai, ustadz dan santri menjadi bagian yang menyatu dengan dinamika lokal.

  13. Study on Fault Current of DFIG during Slight Fault Condition

    OpenAIRE

    Xiangping Kong; Zhe Zhang; Xianggen Yin; Zhenxing Li

    2013-01-01

    In order to ensure the safety of DFIG when severe fault happens, crowbar protection is adopted. But during slight fault condition, the crowbar protection will not trip, and the DFIG is still excited by AC-DC-AC converter. In this condition, operation characteristics of the converter have large influence on the fault current characteristics of DFIG. By theoretical analysis and digital simulation, the fault current characteristics of DFIG during slight voltage dips are studied. And the influenc...

  14. A study on building data warehouse of hospital information system.

    Science.gov (United States)

    Li, Ping; Wu, Tao; Chen, Mu; Zhou, Bin; Xu, Wei-guo

    2011-08-01

    Existing hospital information systems with simple statistical functions cannot meet current management needs. It is well known that hospital resources are distributed with private property rights among hospitals, such as in the case of the regional coordination of medical services. In this study, to integrate and make full use of medical data effectively, we propose a data warehouse modeling method for the hospital information system. The method can also be employed for a distributed-hospital medical service system. To ensure that hospital information supports the diverse needs of health care, the framework of the hospital information system has three layers: datacenter layer, system-function layer, and user-interface layer. This paper discusses the role of a data warehouse management system in handling hospital information from the establishment of the data theme to the design of a data model to the establishment of a data warehouse. Online analytical processing tools assist user-friendly multidimensional analysis from a number of different angles to extract the required data and information. Use of the data warehouse improves online analytical processing and mitigates deficiencies in the decision support system. The hospital information system based on a data warehouse effectively employs statistical analysis and data mining technology to handle massive quantities of historical data, and summarizes from clinical and hospital information for decision making. This paper proposes the use of a data warehouse for a hospital information system, specifically a data warehouse for the theme of hospital information to determine latitude, modeling and so on. The processing of patient information is given as an example that demonstrates the usefulness of this method in the case of hospital information management. Data warehouse technology is an evolving technology, and more and more decision support information extracted by data mining and with decision-making technology is

  15. A study on building data warehouse of hospital information system

    Institute of Scientific and Technical Information of China (English)

    LI Ping; WU Tao; CHEN Mu; ZHOU Bin; XU Wei-guo

    2011-01-01

    Background Existing hospital information systems with simple statistical functions cannot meet current management needs. It is well known that hospital resources are distributed with private property rights among hospitals, such as in the case of the regional coordination of medical services. In this study, to integrate and make full use of medical data effectively, we propose a data warehouse modeling method for the hospital information system. The method can also be employed for a distributed-hospital medical service system. Methods To ensure that hospital information supports the diverse needs of health care, the framework of the hospital information system has three layers: datacenter layer, system-function layer, and user-interface layer. This paper discusses the role of a data warehouse management system in handling hospital information from the establishment of the data theme to the design of a data model to the establishment of a data warehouse. Online analytical processing tools assist user-friendly multidimensional analysis from a number of different angles to extract the required data and information. Results Use of the data warehouse improves online analytical processing and mitigates deficiencies in the decision support system. The hospital information system based on a data warehouse effectively employs statistical analysis and data mining technology to handle massive quantities of historical data, and summarizes from clinical and hospital information for decision making. Conclusions This paper proposes the use of a data warehouse for a hospital information system, specifically a data warehouse for the theme of hospital information to determine latitude, modeling and so on. The processing of patient information is given as an example that demonstrates the usefulness of this method in the case of hospital information management. Data warehouse technology is an evolving technology, and more and more decision support information extracted by data mining

  16. Cognitive Study of Building Metaphor建筑的隐喻认知研究

    Institute of Scientific and Technical Information of China (English)

    孔艳君

    2013-01-01

    Metaphor is a universal phenomenon. Tradition-ally metaphor is seen as as a means of rhetoric, but now it is seen as a cognitive phenomenon. In our life most of the everyday language is metaphor, our mind is also the metaphor. Metaphor has become an indispensable tool for understanding the world. There are a lot of“building”metaphorical expressions in life, as construction is an important component of people’s lives. But the studies of building metaphors have not been systematic and comprehensive. This thesis gives a contrastive study of building metaphors to deepen people’s understanding of building metaphors and enrich the cognitive studies of metaphor.

  17. Building America Case Study: Multifamily Central Heat Pump Water Heaters, Davis, California

    Energy Technology Data Exchange (ETDEWEB)

    2017-03-08

    Although heat pump water heaters (HPWHs) have gained significant attention in recent years as a high efficiency electric water heating solution for single family homes, central HPWHs for commercial or multi-family applications are not as well documented in terms of measured performance and cost effectiveness. To evaluate this technology, the Alliance for Residential Building Innovation team monitored the performance of a 10.5 ton central HPWH installed on a student apartment building at the West Village Zero Net Energy Community in Davis, California. Monitoring data collected over a 16-month period were then used to validate a TRNSYS simulation model. The TRNSYS model was then used to project performance in different climates using local electric rates. Results of the study indicate that after some initial commissioning issues, the HPWH operated reliably with an annual average efficiency of 2.12 (Coefficient of Performance). The observed efficiency was lower than the unit's rated efficiency, primarily due to the fact that the system rarely operated under steady-state conditions. Changes in the system configuration, storage tank sizing, and control settings would likely improve the observed field efficiency. Modeling results suggest significant energy savings relative to electric storage water heating systems (typical annual efficiencies around 0.90) providing for typical simple paybacks of six to ten years without any incentives. The economics versus gas water heating are currently much more challenging given the current low natural gas prices in much of the country. Increased market size for this technology would benefit cost effectiveness and spur greater technology innovation.

  18. Building America Case Study: Multifamily Central Heat Pump Water Heaters, Davis, California

    Energy Technology Data Exchange (ETDEWEB)

    M. Hoeschele, E. Weitzel

    2017-03-01

    Although heat pump water heaters (HPWHs) have gained significant attention in recent years as a high efficiency electric water heating solution for single family homes, central HPWHs for commercial or multi-family applications are not as well documented in terms of measured performance and cost effectiveness. To evaluate this technology, the Alliance for Residential Building Innovation team monitored the performance of a 10.5 ton central HPWH installed on a student apartment building at the West Village Zero Net Energy Community in Davis, California. Monitoring data collected over a 16-month period were then used to validate a TRNSYS simulation model. The TRNSYS model was then used to project performance in different climates using local electric rates. Results of the study indicate that after some initial commissioning issues, the HPWH operated reliably with an annual average efficiency of 2.12 (Coefficient of Performance). The observed efficiency was lower than the unit's rated efficiency, primarily due to the fact that the system rarely operated under steady-state conditions. Changes in the system configuration, storage tank sizing, and control settings would likely improve the observed field efficiency. Modeling results suggest significant energy savings relative to electric storage water heating systems (typical annual efficiencies around 0.90) providing for typical simple paybacks of six to ten years without any incentives. The economics versus gas water heating are currently much more challenging given the current low natural gas prices in much of the country. Increased market size for this technology would benefit cost effectiveness and spur greater technology innovation.

  19. Study of experimental parameters for IRT applications in building elements using multi-layered analytical solutions

    Science.gov (United States)

    Serra, Catarina; Simões, Nuno; Tadeu, António

    2015-05-01

    This paper compares experimental and heat transfer modeling results for thermography applications in building elements. Over the years most building envelope inspections using infrared thermography (IRT) have been focused on qualitative analysis using mostly passive thermography techniques. However, increased need for the monitorization and assessment of the energy performance and thermal behavior of buildings, along with ongoing structural safety concerns, has raised interest in quantitative studies and active IRT applications in buildings. Numerous other fields have benefited from developments in defect detection studies and from countless non-destructive testing applications. Pulse phase thermography, in which phase images are studied (instead of temperature images) using a long heating pulse have been proposed to be the most effective for Civil Engineering applications. However, the particular characteristics of building elements and materials, along with the complex nature of heat transfer phenomena, demand specific experimental procedures and processing techniques. In this paper, analytical solutions to simulate heat transfer in the frequency domain in multi-layered media are used to compute thermal wave phase results. These are compared to experimental IRT phase analysis results of experiments performed on test specimens simulating building elements with embedded defects. Crucial test parameters such as test duration and defect characteristics are changed and their influence is studied. In this way, this paper contributes to the understanding of building envelope thermal patterns using active IRT in defect detection studies and to the definition of test parameters.

  20. Multi-objective and multidisciplinary design optimization of large sports building envelopes: a case study

    NARCIS (Netherlands)

    Yang, D.; Sun, Y.; Turrin, M.; von Buelow, P.; Paul, J.C.

    2015-01-01

    Currently, in the conceptual envelope design of sports facilities, multiple engineering performance feedbacks (e.g. daylight, energy and structural performance) are expected to assist architectural design decision-making. In general, it is known as Building Performance Optimization in the conceptual

  1. Multi-objective and multidisciplinary design optimization of large sports building envelopes: a case study

    NARCIS (Netherlands)

    Yang, D.; Sun, Y.; Turrin, M.; von Buelow, P.; Paul, J.C.

    2015-01-01

    Currently, in the conceptual envelope design of sports facilities, multiple engineering performance feedbacks (e.g. daylight, energy and structural performance) are expected to assist architectural design decision-making. In general, it is known as Building Performance Optimization in the conceptual

  2. Uncertainty analysis of practical structural health monitoring systems currently employed for tall buildings consisting of small number of sensors

    Science.gov (United States)

    Hirai, Kenta; Mita, Akira

    2016-04-01

    Because of social background, such as repeated large earthquakes and cheating in design and construction, structural health monitoring (SHM) systems are getting strong attention. The SHM systems are in a practical phase. An SHM system consisting of small number of sensors has been introduced to 6 tall buildings in Shinjuku area. Including them, there are 2 major issues in the SHM systems consisting of small number of sensors. First, optimal system number of sensors and the location are not well-defined. In the practice, system placement is determined based on rough prediction and experience. Second, there are some uncertainties in estimation results by the SHM systems. Thus, the purpose of this research is to provide useful information for increasing reliability of SHM system and to improve estimation results based on uncertainty analysis of the SHM systems. The important damage index used here is the inter-story drift angle. The uncertainty considered here are number of sensors, earthquake motion characteristics, noise in data, error between numerical model and real building, nonlinearity of parameter. Then I have analyzed influence of each factor to estimation accuracy. The analysis conducted here will help to decide sensor system design considering valance of cost and accuracy. Because of constraint on the number of sensors, estimation results by the SHM system has tendency to provide smaller values. To overcome this problem, a compensation algorithm was discussed and presented. The usefulness of this compensation method was demonstrated for 40 story S and RC building models with nonlinear response.

  3. Parametric study on the performance of green residential buildings in China

    OpenAIRE

    Xi Wang; Hasim Altan; Jian Kang

    2015-01-01

    The parametric study of the indoor environment of green buildings focuses on the quantitative and qualitative improvement of residential building construction in China and the achievement of indoor thermal comfort at a low level of energy use. This study examines the effect of the adaptive thermal comfort of indoor environment control in hot summer and cold winter (HSCW) zones. This work is based on a field study of the regional thermal assessment of two typical cases, the results of which ar...

  4. Parametric study on the performance of green residential buildings in China

    OpenAIRE

    Xi Wang; Hasim Altan; Jian Kang

    2015-01-01

    The parametric study of the indoor environment of green buildings focuses on the quantitative and qualitative improvement of residential building construction in China and the achievement of indoor thermal comfort at a low level of energy use. This study examines the effect of the adaptive thermal comfort of indoor environment control in hot summer and cold winter (HSCW) zones. This work is based on a field study of the regional thermal assessment of two typical cases, the results of which ar...

  5. Study on application of concrete sandwich insulation material in library building insulation

    Science.gov (United States)

    Yang, Zengzhang

    2017-06-01

    Energy shortage is the short slab that restricts the development of social economy, and the rational and effective use of energy is the principle of sustainable development. Building energy consumption accounts for about 30% of total social energy consumption, and this ratio has continued to rise, so the energy saving potential is great in the construction sector. In view of the building energy consumption problem, we produce green insulation building materials with the crop straw, and improve the construction of hot and humid environment. In this paper, we take concrete sandwich straw blocks in library building as the research object, through the experiment to test its winter heat consumption and summer power consumption indicators, carry out experimental study on thermal insulation performance, and explore the overall thermal and energy saving performance of concrete sandwich straw blocks in library building.

  6. Study of the weak charged hadronic current in b decays

    Science.gov (United States)

    Acciarri, M.; Adriani, O.; Aguilar-Benitez, M.; Ahlen, S.; Alpat, B.; Alcaraz, J.; Alemanni, G.; Allaby, J.; Aloisio, A.; Alverson, G.; Alviggi, M. G.; Ambrosi, G.; Anderhub, H.; Andreev, V. P.; Angelescu, T.; Anselmo, F.; Antreasyan, D.; Arefiev, A.; Azemoon, T.; Aziz, T.; Bagnaia, P.; Baksay, L.; Ball, R. C.; Banerjee, S.; Banicz, K.; Barillère, R.; Barone, L.; Bartalini, P.; Baschirotto, A.; Basile, M.; Battiston, R.; Bay, A.; Becattini, F.; Becker, U.; Behner, F.; Berdugo, J.; Berges, P.; Bertucci, B.; Betev, B. L.; Bhattacharya, S.; Biasini, M.; Biland, A.; Bilei, G. M.; Blaising, J. J.; Blyth, S. C.; Bobbink, G. J.; Bock, R.; Böhm, A.; Borgia, B.; Boucham, A.; Bourilkov, D.; Bourquin, M.; Boutigny, D.; Branson, J. G.; Brigljevic, V.; Brock, I. C.; Buffini, A.; Buijs, A.; Burger, J. D.; Burger, W. J.; Busenitz, J.; Buytenhuijs, A.; Cai, X. D.; Campanelli, M.; Capell, M.; Romeo, G. Cara; Caria, M.; Carlino, G.; Cartacci, A. M.; Casaus, J.; Castellini, G.; Cavallari, F.; Cavallo, N.; Cecchi, C.; Cerrada, M.; Cesaroni, F.; Chamizo, M.; Chan, A.; Chang, Y. H.; Chaturvedi, U. K.; Chemarin, M.; Chen, A.; Chen, G.; Chen, G. M.; Chen, H. F.; Chen, H. S.; Chen, M.; Chiefari, G.; Chien, C. Y.; Choi, M. T.; Cifarelli, L.; Cindolo, F.; Civinini, C.; Clare, I.; Clare, R.; Cohn, H. O.; Coignet, G.; Colijn, A. P.; Colino, N.; Commichau, V.; Costantini, S.; Cotorobai, F.; de La Cruz, B.; Csilling, A.; Dai, T. S.; D'Alessandro, R.; de Asmundis, R.; de Boeck, H.; Degré, A.; Deiters, K.; Denes, P.; Denotaristefani, F.; Dibitonto, D.; Diemoz, M.; van Dierendonck, D.; di Lodovico, F.; Dionisi, C.; Dittmar, M.; Dominguez, A.; Doria, A.; Dorne, I.; Dova, M. T.; Drago, E.; Duchesneau, D.; Duinker, P.; Duran, I.; Dutta, S.; Easo, S.; Efremenko, Yu.; El Mamouni, H.; Engler, A.; Eppling, F. J.; Erné, F. C.; Ernenwein, J. P.; Extermann, P.; Fabre, M.; Faccini, R.; Falciano, S.; Favara, A.; Fay, J.; Fedin, O.; Felcini, M.; Fenyi, B.; Ferguson, T.; Fernandez, D.; Ferroni, F.; Fesefeldt, H.; Fiandrini, E.; Field, J. H.; Filthaut, F.; Fisher, P. H.; Forconi, G.; Fredj, L.; Freudenreich, K.; Furetta, C.; Galaktionov, Yu.; Ganguli, S. N.; Garcia-Abia, P.; Gau, S. S.; Gentile, S.; Gerald, J.; Gheordanescu, N.; Giagu, S.; Goldfarb, S.; Goldstein, J.; Gong, Z. F.; Gougas, A.; Gratta, G.; Gruenewald, M. W.; Gupta, V. K.; Gurtu, A.; Gutay, L. J.; Hartmann, B.; Hasan, A.; Hatzifotiadou, D.; Hebbeker, T.; Hervé, A.; van Hoek, W. C.; Hofer, H.; Hoorani, H.; Hou, S. R.; Hu, G.; Innocente, V.; Janssen, H.; Jenkes, K.; Jin, B. N.; Jones, L. W.; de Jong, P.; Josa-Mutuberria, I.; Kasser, A.; Khan, R. A.; Kamrad, D.; Kamyshkov, Yu.; Kapustinsky, J. S.; Karyotakis, Y.; Kaur, M.; Kienzle-Focacci, M. N.; Kim, D.; Kim, J. K.; Kim, S. C.; Kim, Y. G.; Kinnison, W. W.; Kirkby, A.; Kirkby, D.; Kirkby, J.; Kiss, D.; Kittel, W.; Klimentov, A.; König, A. C.; Korolko, I.; Koutsenko, V.; Kraemer, R. W.; Krenz, W.; Kuijten, H.; Kunin, A.; de Guevara, P. Ladron; Landi, G.; Lapoint, C.; Lassila-Perini, K.; Laurikainen, P.; Lebeau, M.; Lebedev, A.; Lebrun, P.; Lecomte, P.; Lecoq, P.; Le Coultre, P.; Lee, J. S.; Lee, K. Y.; Leggett, C.; Le Goff, J. M.; Leiste, R.; Leonardi, E.; Levtchenko, P.; Li, C.; Lieb, E.; Lin, W. T.; Linde, F. L.; Lista, L.; Liu, Z. A.; Lohmann, W.; Longo, E.; Lu, W.; Lu, Y. S.; Lübelsmeyer, K.; Luci, C.; Luckey, D.; Luminari, L.; Lustermann, W.; Ma, W. G.; Maity, M.; Majumder, G.; Malgeri, L.; Malinin, A.; Maña, C.; Mangla, S.; Marchesini, P.; Marin, A.; Martin, J. P.; Marzano, F.; Massaro, G. G. G.; McNally, D.; Mele, S.; Merola, L.; Meschini, M.; Metzger, W. J.; von der Mey, M.; Mi, Y.; Mihul, A.; van Mil, A. J. W.; Mirabelli, G.; Mnich, J.; Molnar, P.; Monteleoni, B.; Moore, R.; Morganti, S.; Moulik, T.; Mount, R.; Müller, S.; Muheim, F.; Nagy, E.; Nahn, S.; Napolitano, M.; Nessi-Tedaldi, F.; Newman, H.; Niessen, T.; Nippe, A.; Nisati, A.; Nowak, H.; Opitz, H.; Organtini, G.; Ostonen, R.; Pandoulas, D.; Paoletti, S.; Paolucci, P.; Park, H. K.; Pascale, G.; Passaleva, G.; Patricelli, S.; Paul, T.; Pauluzzi, M.; Paus, C.; Pauss, F.; Peach, D.; Pei, Y. J.; Pensotti, S.; Perret-Gallix, D.; Petrak, S.; Pevsner, A.; Piccolo, D.; Pieri, M.; Pinto, J. C.; Piroué, P. A.; Pistolesi, E.; Plyaskin, V.; Pohl, M.; Pojidaev, V.; Postema, H.; Produit, N.; Prokofiev, D.; Rahal-Callot, G.; Rancoita, P. G.; Rattaggi, M.; Raven, G.; Razis, P.; Read, K.; Ren, D.; Rescigno, M.; Reucroft, S.; van Rhee, T.; Riemann, S.; Riemers, B. C.; Riles, K.; Rind, O.; Ro, S.; Robohm, A.; Rodin, J.; Rodriguez, F. J.; Roe, B. P.; Romero, L.; Rosier-Lees, S.; Rosselet, Ph.; van Rossum, W.; Roth, S.; Rubio, J. A.; Rykaczewski, H.; Salicio, J.; Sanchez, E.; Santocchia, A.; Sarakinos, M. E.; Sarkar, S.; Sassowsky, M.; Sauvage, G.; Schäfer, C.; Schegelsky, V.; Schmidt-Kaerst, S.; Schmitz, D.; Schmitz, P.; Schneegans, M.; Scholz, N.; Schopper, H.; Schotanus, D. J.; Schwenke, J.; Schwering, G.; Sciacca, C.; Sciarrino, D.; Sens, J. C.; Servoli, L.; Shevchenko, S.; Shivarov, N.; Shoutko, V.; Shukla, J.; Shumilov, E.; Shvorob, A.; Siedenburg, T.; Son, D.; Sopczak, A.; Soulimov, V.; Smith, B.; Spillantini, P.; Steuer, M.; Stickland, D. P.; Stone, H.; Stoyanov, B.; Straessner, A.; Strauch, K.; Sudhakar, K.; Sultanov, G.; Sun, L. Z.; Susinno, G. F.; Suter, H.; Swain, J. D.; Tang, X. W.; Tauscher, L.; Taylor, L.; Ting, Samuel C. C.; Ting, S. M.; Tonutti, M.; Tonwar, S. C.; Tóth, J.; Tully, C.; Tuchscherer, H.; Tung, K. L.; Uchida, Y.; Ulbricht, J.; Uwer, U.; Valente, E.; van de Walle, R. T.; Vesztergombi, G.; Vetlitsky, I.; Viertel, G.; Vivargent, M.; Völkert, R.; Vogel, H.; Vogt, H.; Vorobiev, I.; Vorobyov, A. A.; Vorvolakos, A.; Wadhwa, M.; Wallraff, W.; Wang, J. C.; Wang, X. L.; Wang, Z. M.; Weber, A.; Wittgenstein, F.; Wu, S. X.; Wynhoff, S.; Xu, J.; Xu, Z. Z.; Yang, B. Z.; Yang, C. G.; Yao, X. Y.; Ye, J. B.; Yeh, S. C.; You, J. M.; Zalite, An.; Zalite, Yu.; Zemp, P.; Zeng, Y.; Zhang, Z.; Zhang, Z. P.; Zhou, B.; Zhou, Y.; Zhu, G. Y.; Zhu, R. Y.; Zichichi, A.; Ziegler, F.

    1997-02-01

    Charged and neutral particle multiplicities of jets associated with identified semileptonic and hadronic b decays are studied. The observed differences between these jets are used to determine the inclusive properties of the weak charged hadronic current. The average charged particle multiplicity of the weak charged hadronic current in b decays is measured for the first time to be 2.69+/-0.07 (stat.)+/-0.14(syst.). This result is in good agreement with the JETSET hadronization model of the weak charged hadronic current if 40+/-17% of the produced mesons are light-flavored tensor (L=1) mesons. This level of tensor meson production is consistent with the measurement of the π0 multiplicity in the weak charged hadronic current in b decays.

  7. Study of the Weak Charged Hadronic Current in b Decays

    CERN Document Server

    Acciarri, M; Aguilar-Benítez, M; Ahlen, S P; Alpat, B; Alcaraz, J; Alemanni, G; Allaby, James V; Aloisio, A; Alverson, G; Alviggi, M G; Ambrosi, G; Anderhub, H; Andreev, V P; Angelescu, T; Anselmo, F; Antreasyan, D; Arefev, A; Azemoon, T; Aziz, T; Bagnaia, P; Baksay, L; Ball, R C; Banerjee, S; Banicz, K; Barillère, R; Barone, L; Bartalini, P; Baschirotto, A; Basile, M; Battiston, R; Bay, A; Becattini, F; Becker, U; Behner, F; Berdugo, J; Berges, P; Bertucci, B; Betev, B L; Bhattacharya, S; Biasini, M; Biland, A; Bilei, G M; Blaising, J J; Blyth, S C; Bobbink, Gerjan J; Böck, R K; Böhm, A; Borgia, B; Boucham, A; Bourilkov, D; Bourquin, Maurice; Boutigny, D; Branson, J G; Brigljevic, V; Brock, I C; Buffini, A; Buijs, A; Burger, J D; Burger, W J; Busenitz, J K; Buytenhuijs, A O; Cai, X D; Campanelli, M; Capell, M; Cara Romeo, G; Caria, M; Carlino, G; Cartacci, A M; Casaus, J; Castellini, G; Cavallari, F; Cavallo, N; Cecchi, C; Cerrada-Canales, M; Cesaroni, F; Chamizo-Llatas, M; Chan, A; Chang, Y H; Chaturvedi, U K; Chemarin, M; Chen, A; Chen, G; Chen, G M; Chen, H F; Chen, H S; Chen, M; Chiefari, G; Chien, C Y; Choi, M T; Cifarelli, Luisa; Cindolo, F; Civinini, C; Clare, I; Clare, R; Cohn, H O; Coignet, G; Colijn, A P; Colino, N; Commichau, V; Costantini, S; Cotorobai, F; de la Cruz, B; Csilling, Akos; Dai, T S; D'Alessandro, R; De Asmundis, R; De Boeck, H; Degré, A; Deiters, K; Denes, P; De Notaristefani, F; DiBitonto, Daryl; Diemoz, M; Van Dierendonck, D N; Di Lodovico, F; Dionisi, C; Dittmar, Michael; Dominguez, A; Doria, A; Dorne, I; Dova, M T; Drago, E; Duchesneau, D; Duinker, P; Durán, I; Dutta, S; Easo, S; Efremenko, Yu V; El-Mamouni, H; Engler, A; Eppling, F J; Erné, F C; Ernenwein, J P; Extermann, Pierre; Fabre, M; Faccini, R; Falciano, S; Favara, A; Fay, J; Fedin, O; Felcini, Marta; Fenyi, B; Ferguson, T; Fernández, D; Ferroni, F; Fesefeldt, H S; Fiandrini, E; Field, J H; Filthaut, Frank; Fisher, P H; Forconi, G; Fredj, L; Freudenreich, Klaus; Furetta, C; Galaktionov, Yu; Ganguli, S N; García-Abia, P; Gau, S S; Gentile, S; Gerald, J; Gheordanescu, N; Giagu, S; Goldfarb, S; Goldstein, J; Gong, Z F; Gougas, Andreas; Gratta, Giorgio; Grünewald, M W; Gupta, V K; Gurtu, A; Gutay, L J; Hartmann, B; Hasan, A; Hatzifotiadou, D; Hebbeker, T; Hervé, A; Van Hoek, W C; Hofer, H; Hoorani, H; Hou, S R; Hu, G; Innocente, Vincenzo; Janssen, H; Jenkes, K; Jin, B N; Jones, L W; de Jong, P; Josa-Mutuberria, I; Kasser, A; Khan, R A; Kamrad, D; Kamyshkov, Yu A; Kapustinsky, J S; Karyotakis, Yu; Kaur, M; Kienzle-Focacci, M N; Kim, D; Kim, J K; Kim, S C; Kim, Y G; Kinnison, W W; Kirkby, A; Kirkby, D; Kirkby, Jasper; Kiss, D; Kittel, E W; Klimentov, A; König, A C; Korolko, I; Koutsenko, V F; Krämer, R W; Krenz, W; Kuijten, H; Kunin, A; Ladrón de Guevara, P; Landi, G; Lapoint, C; Lassila-Perini, K M; Laurikainen, P; Lebeau, M; Lebedev, A; Lebrun, P; Lecomte, P; Lecoq, P; Le Coultre, P; Lee Jae Sik; Lee, K Y; Leggett, C; Le Goff, J M; Leiste, R; Leonardi, E; Levchenko, P M; Li Chuan; Lieb, E H; Lin, W T; Linde, Frank L; Lista, L; Liu, Z A; Lohmann, W; Longo, E; Lu, W; Lü, Y S; Lübelsmeyer, K; Luci, C; Luckey, D; Luminari, L; Lustermann, W; Ma Wen Gan; Maity, M; Majumder, G; Malgeri, L; Malinin, A; Maña, C; Mangla, S; Marchesini, P A; Marin, A; Martin, J P; Marzano, F; Massaro, G G G; McNally, D; Mele, S; Merola, L; Meschini, M; Metzger, W J; Von der Mey, M; Mi, Y; Mihul, A; Van Mil, A J W; Mirabelli, G; Mnich, J; Molnár, P; Monteleoni, B; Moore, R; Morganti, S; Moulik, T; Mount, R; Müller, S; Muheim, F; Nagy, E; Nahn, S; Napolitano, M; Nessi-Tedaldi, F; Newman, H; Nippe, A; Nisati, A; Nowak, H; Opitz, H; Organtini, G; Ostonen, R; Pandoulas, D; Paoletti, S; Paolucci, P; Park, H K; Pascale, G; Passaleva, G; Patricelli, S; Paul, T; Pauluzzi, M; Paus, C; Pauss, Felicitas; Peach, D; Pei, Y J; Pensotti, S; Perret-Gallix, D; Petrak, S; Pevsner, A; Piccolo, D; Pieri, M; Pinto, J C; Piroué, P A; Pistolesi, E; Plyaskin, V; Pohl, M; Pozhidaev, V; Postema, H; Produit, N; Prokofev, D; Prokofiev, D O; Rahal-Callot, G; Rancoita, P G; Rattaggi, M; Raven, G; Razis, P A; Read, K; Ren, D; Rescigno, M; Reucroft, S; Van Rhee, T; Riemann, S; Riemers, B C; Riles, K; Rind, O; Ro, S; Robohm, A; Rodin, J; Rodríguez-Calonge, F J; Roe, B P; Romero, L; Rosier-Lees, S; Rosselet, P; Van Rossum, W; Roth, S; Rubio, Juan Antonio; Rykaczewski, H; Salicio, J; Sánchez, E; Santocchia, A; Sarakinos, M E; Sarkar, S; Sassowsky, M; Sauvage, G; Schäfer, C; Shchegelskii, V; Schmidt-Kärst, S; Schmitz, D; Schmitz, P; Schneegans, M; Scholz, N; Schopper, Herwig Franz; Schotanus, D J; Schwenke, J; Schwering, G; Sciacca, C; Sciarrino, D; Sens, Johannes C; Servoli, L; Shevchenko, S; Shivarov, N; Shoutko, V; Shukla, J; Shumilov, E; Shvorob, A V; Siedenburg, T; Son, D; Sopczak, André; Soulimov, V; Smith, B; Spillantini, P; Steuer, M; Stickland, D P; Stone, H; Stoyanov, B; Strässner, A; Strauch, K; Sudhakar, K; Sultanov, G G; Sun, L Z; Susinno, G F; Suter, H; Swain, J D; Tang, X W; Tauscher, Ludwig; Taylor, L; Ting, Samuel C C; Ting, S M; Tonutti, M; Tonwar, S C; Tóth, J; Tully, C; Tuchscherer, H; Tung, K L; Uchida, Y; Ulbricht, J; Uwer, U; Valente, E; Van de Walle, R T; Vesztergombi, G; Vetlitskii, I; Viertel, Gert M; Vivargent, M; Völkert, R; Vogel, H; Vogt, H; Vorobev, I; Vorobyov, A A; Vorvolakos, A; Wadhwa, M; Wallraff, W; Wang, J C; Wang, X L; Wang, Z M; Weber, A; Wittgenstein, F; Wu, S X; Wynhoff, S; Xu, J; Xu, Z Z; Yang, B Z; Yang, C G; Yao, X Y; Ye, J B; Yeh, S C; You, J M; Zalite, A; Zalite, Yu; Zemp, P; Zeng, Y; Zhang, Z; Zhang, Z P; Zhou, B; Zhou, Y; Zhu, G Y; Zhu, R Y; Zichichi, Antonino; Ziegler, F

    1997-01-01

    Charged and neutral particle multiplicities of jets associated with identified semileptonic and hadronic b decays are studied. The observed differences between these jets are used to determine the inclusive properties of the weak charged hadronic current. The average charged particle multiplicity of the weak charged hadronic current in b decays is measured for the first time to be 2.69$\\pm$0.07(stat.)$\\pm$0.14(syst.). This result is in good agreement with the JETSET hadronization model of the weak charged hadronic current if 40$\\pm$17\\% of the produced mesons are light--flavored tensor (L=1) mesons. This level of tensor meson production is consistent with the measurement of the $\\pi^0$ multiplicity in the weak charged hadronic current in b decays. \\end{abstract}

  8. Daylighting and energy performance of a building for composite climate: An experimental study

    Directory of Open Access Journals (Sweden)

    Madhu Sudan

    2016-12-01

    Full Text Available The present study includes overall energy saving through thermal as well as daylighting for composite climate for the building known as SODHA BERS COMPLEX (SBC situated at Varanasi, India. The building has been designed including all the passive concepts for thermal comfort as well daylighting to maximize the use of natural lighting for the occupants in day to day activities. This approach can be useful for multi-story building for rural and urban areas for both residential and commercial buildings. The energy saving potential and corresponding CO2 mitigation have been determined for different lifetimes of the building. The energy matrices namely energy payback time (EPBT, energy production factor (EPF and life cycle conversion efficiency (LCCE of the building have also been estimated by considering overall energy saving. An annual energy saving has been obtained as 3675.61 kW h due to daylight concept by considering different Zones in each floors of the building. Further, the EPBT has been determined as 49.25 years and 34.73 years for average 4 °C and 6 °C temperature difference between ambient and room, respectively. It has been found that when thermal heat gain increases in the building LCCE and EPF increase.

  9. Critical current studies of a HTS rectangular coil

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Z. [Department of Engineering, University of Cambridge (United Kingdom); Chudy, M., E-mail: Michal.chudy@stuba.sk [Graduate School of Technology Management, University of Pretoria (South Africa); Institute of Power and Applied Electrical Engineering, Slovak University of Technology in Bratislava (Slovakia); Ruiz, H.S. [Department of Engineering, University of Leicester, Leicester LE1 7RH (United Kingdom); Zhang, X.; Coombs, T. [Department of Engineering, University of Cambridge (United Kingdom)

    2017-05-15

    Highlights: • Unique square pancake coil was manufactured. • Measurements in relatively high magnetic field were performed. • Different sections of the coil were characterized. • Parts of the coil which are limiting critical current were identified. - Abstract: Nowadays, superconducting high field magnets are used in numerous applications due to their superior properties. High temperature superconductors (HTS) are usually used for production of circular pancake or racetrack coils. However different geometries of HTS coils might be required for some specific applications. In this study, the HTS coil wound on a rectangular frame was fully characterized in homogeneous DC background field. The study contains measurements of critical current angular dependencies. The critical current of the entire coil and two selected strands under different magnitudes and orientations of external magnetic fields are measured. The critical regions of the coil in different angular regimes are determined. This study brings better understanding of the in- field performance of HTS coils wound on frames with right-angles.

  10. Formation and erosion of biogeomorphological structures: A model study on the tube-building polychaete

    NARCIS (Netherlands)

    Borsje, B.W.; Bouma, T.J.; Rabaut, M.; Herman, P.M.J.; Hulscher, S.J.M.H.; Borsje, B.W.; Herman, P.M.J.

    2014-01-01

    We study how organism traits and population densities of ecosystem engineering species, in combination withenvironmental factors, affect the formation and erosion rates of biogeomorphological structures, and focus on thewidely distributed marine tube-building polychaete Lanice conchilega, which live

  11. Radon diffusion studies in some building materials using solid state nuclear track detectors

    CERN Document Server

    Singh, S; Singh, B; Singh, J

    1999-01-01

    LR-115 plastic track detector has been used to study radon diffusion through some building materials, viz. cement, soil, marble chips, sand and lime as well as air. Diffusion constant and diffusion length is calculated for all these materials.

  12. Andean Mountain Building: An Integrated Topographic, GPS, Seismological and Numerical Study

    Science.gov (United States)

    Liu, Mian; Stein, Seth

    2003-01-01

    The main objective of this project was to better understand the geodynamics controlling the mountain building and topographic evolution in the central Andes using an integrated approach that combines GPS, seismological, and numerical studies.

  13. Buildings of the Future Scoping Study: A Framework for Vision Development

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Goins, John D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-02-01

    The Buildings of the Future Scoping Study, funded by the U.S. Department of Energy (DOE) Building Technologies Office, seeks to develop a vision for what U.S. mainstream commercial and residential buildings could become in 100 years. This effort is not intended to predict the future or develop a specific building design solution. Rather, it will explore future building attributes and offer possible pathways of future development. Whether we achieve a more sustainable built environment depends not just on technologies themselves, but on how effectively we envision the future and integrate these technologies in a balanced way that generates economic, social, and environmental value. A clear, compelling vision of future buildings will attract the right strategies, inspire innovation, and motivate action. This project will create a cross-disciplinary forum of thought leaders to share their views. The collective views will be integrated into a future building vision and published in September 2015. This report presents a research framework for the vision development effort based on a literature survey and gap analysis. This document has four objectives. First, it defines the project scope. Next, it identifies gaps in the existing visions and goals for buildings and discusses the possible reasons why some visions did not work out as hoped. Third, it proposes a framework to address those gaps in the vision development. Finally, it presents a plan for a series of panel discussions and interviews to explore a vision that mitigates problems with past building paradigms while addressing key areas that will affect buildings going forward.

  14. Approaches for building community participation: A qualitative case study of Canadian food security programs.

    Science.gov (United States)

    Hyett, Nerida; Kenny, Amanda; Dickson-Swift, Virginia

    2017-08-01

    There is increasing opportunity and support for occupational therapists to expand their scope of practice in community settings. However, evidence is needed to increase occupational therapists' knowledge, confidence, and capacity with building community participation and adopting community-centered practice roles. The purpose of this study is to improve occupational therapists' understanding of an approach to building community participation, through case study of a network of Canadian food security programs. Qualitative case study was utilized. Data were semistructured interviews, field observations, documents, and online social media. Thematic analysis was used to identify and describe four themes that relate to processes used to build community participation. The four themes were use of multiple methods, good leaders are fundamental, growing participation via social media, and leveraging outcomes. Occupational therapists can utilize an approach for building community participation that incorporates resource mobilization. Challenges of sustainability and social exclusion must be addressed.

  15. Current research projects on traffic conflicts technique studies.

    NARCIS (Netherlands)

    Hondel, M. van den & and Kraay, J.H.

    1979-01-01

    A review of current research concerning the development, evaluation and use of the traffic conflicts technique is presented. The 32 studies, selected from the IRRD data base, are listed alphabetically by names of countries and under countries by names of research organizations. The IRRD descriptions

  16. Subminiature eddy current transducers for studying boride coatings

    Science.gov (United States)

    Dmitriev, S. F.; Ishkov, A. V.; Malikov, V. N.; Sagalakov, A. M.

    2016-07-01

    Strengthening of parts and units of machines, increased reliability and longer service life is an important task of modern mechanical engineering. The main objects of study in the work were selected steel 65G and 50HGA, wear-resistant boride coatings ternary system Fe-B-Fe n B which were investigated by scanning electron microscopy and eddy-current nondestructive methods.

  17. A study of eddy current measurement (1986-1987)

    Energy Technology Data Exchange (ETDEWEB)

    Ramachandran, R.S.; Armstrong, K.P.

    1989-06-22

    A study was conducted in 1986 to evaluate a modified eddy current system for measuring copper thickness on Kapton. Results showed a measurement error of 0.42 {mu}in. for a thickness range of 165 to 170 {mu}in. and a measurement variability of 3.2 {mu}in.

  18. Cartography and Population Geography as Current Events: A Case Study

    Science.gov (United States)

    Comenetz, Joshua

    2003-01-01

    The Sanders housing lawsuit in Pennsylvania provides a case study of how to incorporate current events into the teaching of cartography or population geography at the high school or college level. Settlement of the Sanders case resulted in the release of information about the segregation of public housing by race in the Pittsburgh area. The issues…

  19. Thermal performance study and evaluation of comfort temperatures in vernacular buildings of North-East India

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Manoj Kumar; Atreya, S.K. [Instrument Design and Development Centre, Indian Institute of Technology Delhi, New Delhi 110016 (India); Mahapatra, Sadhan [Department of Energy, Tezpur University, Tezpur 784028, Assam (India)

    2010-02-15

    Solar passive techniques are being used in vernacular buildings throughout the world. Researchers have done extensive study on thermal performance of vernacular buildings in the different parts of the world. Vernacular architecture of North-Eastern India represents the principle of climate-responsive architecture, which still lacks experimental validation and quantitative analysis. Thermal comfort not only makes the occupants comfortable but also governs energy consumption in the building. Detailed field studies on thermal performances of typical traditional vernacular dwellings in different bioclimatic zones have been undertaken. This field study includes detailed survey of 150 vernacular dwellings, field tests and thermal sensation vote of 300 occupants on ASHRAE thermal sensation scale. Field test includes measurement of temperature, humidity, illumination level and building design parameters. Thermal performances of these vernacular dwellings were evaluated for winter, pre-summer, summer/monsoon and pre-winter months of the year 2008. This evaluation is based on 'adaptive approach', which is the outcome of the field studies and is now part of ASHRAE standard 55/2004 for predicting comfortable temperature of naturally ventilated buildings. This study also tried to find out the range of comfort temperature in these vernacular buildings for different season of the year. It has been found that these vernacular dwellings perform quite satisfactorily except in the winter months and the occupants feel comfortable in a wider range of temperature. (author)

  20. Differential Thermostimulated Discharge Current Method for Studying Electrets

    Science.gov (United States)

    Mekishev, G. A.; Yovcheva, T. A.; Viraneva, A. P.; Gencheva, E. A.

    2010-01-01

    The thermostimulated discharge current method (TSDC) is widely used for the study of charge storage mechanisms in electrets. A new discharged technique, called differential, which consists in discharging a charged sample through an otherwise identical but uncharged one, has been proposed by J.-P. Reboul and A. Toureille. In the present paper a new version of the differential thermostimulated discharge current method is advanced. In contrast to the differential technique described earlier, the measuring cell allows to realize typical differential technique. In this case the measuring system records the difference of the thermostimulated currents of two samples which have been preliminary charged (or thermally treated) under the same or different conditions. Samples of 0.85 mm thick polymethylmethacrylate are used to demonstrate an operation of the developed differential TSDC method.

  1. Marble bowing: comparative studies of three different public building facades

    Science.gov (United States)

    Siegesmund, S.; Ruedrich, J.; Koch, A.

    2008-12-01

    The veneer cladding of the Oeconomicum (OEC, Göttingen), the State Theatre of Darmstadt (STD, Darmstadt) and of the State and University Library (SUB, Göttingen) is characterised by pronounced bowing after a short time of exposure. Direct comparison of bowing data related to measurements from 2000 to 2003 at the SUB clearly show that the amplitude in bowing had significantly increased. The bowing is different in intensity and orientation (concave, convex). The cladding material (Peccia marble, Rosa Estremoz marble and Carrara marble) are different in lattice preferred orientation, grain size distribution and grain interlocking. Depending on the bowing, panels may show cracks mostly initiated at the dowels. The percentage of visible cracks and breakouts increases with the amplitude of bowing except for the STD. Repetitive heating-cooling under dry conditions leads to considerable inelastic residual strain only after the first or second thermal cycle. The residual strain continuously increases again if water is present, whereby the moisture content after a thermal cycle has a certain impact on the decay rate. The water-enhanced thermal dilatation strongly correlates with the deterioration rate obtained from the laboratory bow test. Detailed petrophysical investigations provide evidence that with increasing bowing a decrease of mechanical properties (flexural strength or breaking load at dowel hole) occur. Marble degradation is also connected with the increase in porosity and a general shift of the maximum pore radii to larger pore sizes. On-site damage analyses were combined with laboratory tests of the bowing potential to constrain factors that may influence the risk failure. The experimental bowing data clearly demonstrate that after 40 heating cycles combined with the effect of moisture a certain impact on the decay rate is observed. In the case of demounted panels the bowing tests show that already strongly deformed panels from the building exhibit a lower

  2. Prevalence and risk factors for Sick Building Syndrome among Italian correctional officers: A pilot study

    Directory of Open Access Journals (Sweden)

    Francesco Chirico

    2017-03-01

    Full Text Available Introduction: Over the past two decades, numerous studies on indoor air and the Sick Building Syndrome (SBS have been conducted, mostly in office environments. However, there is little knowledge about SBS in police officers. This study was aimed to fill this gap. Methods: A cross-sectional questionnaire survey was conducted in 2016 at the Triveneto Penitentiary Center, Northern Italy. Chi-square was used to test the difference of prevalence between office workers (OWs and correctional officers (COs of personal characteristics, cases of SBS, and general and mucocutaneous symptoms associated with SBS. A binary logistic regression was used to identify among individual, environmental, and psychosocial characteristics, factors associated with correctional officers’ Sick Building Syndrome. Results: Chi-squared analyses revealed that there were statistically significant differences in the estimated prevalence of SBS general symptoms (χ2 (1 = 12.22, P < .05, SBS mucocutaneous symptoms (χ2 (1 = 9.04, P < .05, and cases of SBS (χ2 (1 = 4.39, P <.05 between COs and OWs. COs reported that their health had been affected by the passive smoking (β = 2.34, P < .05 and unpleasant odour (β = 2.51, P < .05 as environmental risk factors; work-family conflict (β = 2.14, P < .05, psychological and physical isolation (β = 2.07, P < .05, and negative public image (β = 2.06, P < .05 as psychosocial risk factors. Finally, atopy (β = 2.02, P < .05 and to be current smoker (β = 2.02, P < .05 were statistically significant behavioral predictors of SBS among correctional officers. Discussion: Our survey showed that symptoms compatible with the sick building syndrome are common in correctional officers and that psychosocial work climate and exposure to passive smoking could have a strong influence on the prevalence of both general and mucocutaneous symptoms associated with SBS. A health policy for passive tobacco smoking within prisons, and for work-related stress

  3. Dynamic Simulation of the Green Roofs Impact on Building Energy Performance, Case Study of Antananarivo, Madagascar

    Directory of Open Access Journals (Sweden)

    Hery Tiana Rakotondramiarana

    2015-05-01

    Full Text Available Green roofs improve building energy performance and constitute an alternative to sustainable buildings. A green roof model is dynamically coupled with a building thermal model to assess its energy performance that takes into account the indoor air temperature dynamic changes. Under the climate conditions in Antananarivo, we compared green and conventional roofs. The present study shows that green roofs protect the roof structure under extreme temperature and large temperature fluctuations. For the case of Antananarivo, the amplitude of the temperature fluctuations at the top face of the support is reduced by 28 °C when using green roof. The impact of the green roof on indoor air temperature and energy demand is investigated. The vegetation decreases the maximum indoor air temperature and improves the building thermal comfort during summer days. It has no effect on the minimum indoor air temperature, but additional soil thickness can increase it. In addition, a global sensitivity analysis, which is carried out on the proposed model without considering any specific weather data, allows us to identify the most influential parameters on the energy demand. It has been found that green roofs have almost insignificant thermal impact in insulated buildings; however, their potential prevails over the building envelope and weather characteristics in the case of non-insulated building.

  4. Diagramming Transactive Building Business Cases: Using Principles of e3 Value to Document Valuation Studies

    Energy Technology Data Exchange (ETDEWEB)

    Hammerstrom, Donald J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Makhmalbaf, Atefe [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Marinovici, Maria C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-12-30

    Energy management in buildings is becoming more transactive. Pacific Northwest National Laboratory and the U.S. Department of Energy Building Technologies Office recently defined innovative use cases wherein market-like mechanisms are used to manage energy within buildings, between buildings, and between buildings and third-party entities, such as power utilities. A next step toward defining a set of transactive use cases in the buildings domain is to carefully diagram the corresponding business cases to capture details of transactions among all stakeholders and their economic value propositions. The principles of e3-value diagramming are applied in this report toward creating business value diagrams. These principles are extended to be consistent with Universal Modeling Language use-case diagrams. Example diagrams are presented for a subset of buildings-domain use cases that were introduced in an earlier Pacific Northwest National Laboratory report. The diagrams are intended to clearly represent an understanding of the transactions through which individual entities accumulate value in their respective use cases, and the diagrams should therefore support economic valuation studies. The report reviews some of the foundational principles of e3 value and includes authors’ insights concerning the formulation of these diagrams using Universal Modeling Language as a more systematic modeling approach.

  5. Building renovation with interior insulation on solid masonry walls in Denmark - A study of the building segment and possible solutions

    DEFF Research Database (Denmark)

    Odgaard, Tommy; Bjarløv, Søren Peter; Rode, Carsten;

    2015-01-01

    The segment size of the Danish multi-story building stock from the period 1851-1930 is established through a unique major database managed by the Danish authorities. The outcome illustrates a large segment with 219,202 apartment units distributed over 14,832 unique buildings, all sharing characte...

  6. Current State of Numerical Simulations and Testing for the Blast and Impact Protection of the Build Civil Engineering Infrastructure

    Institute of Scientific and Technical Information of China (English)

    GEBBEKEN Norbert

    2006-01-01

    The identification of the critical infrastructure has shown that the build civil engineering infrastructure is almost involved everywhere,even with the IT-infrastructure.Therefore,the passive safety of structures is demanded.Security associations have analysed that most assaults came along with explosion and impact scenarios,which amount in 80% of assaults.Consequently,these are the extraordinary loads the structures have to be planned and designed for.To carry out such an engineering job,the engineer has to be educated in multiple disciplines as physics,material science,continuum mechanics,numerical mechanics,testing,structural engineering and related specific fields as wave propagation etc.In this paper we will concentrate on the subjects of numerical simulation and testing.

  7. Energy efficiency of buildings with a solar space : two case studies from Anatolian plateau

    Energy Technology Data Exchange (ETDEWEB)

    Elias-Ozkan, S.T.; Summers, F.; Taner, O. [Middle East Technical Univ., Ankara (Turkey). Dept. of Architecture

    2009-07-01

    This paper reported on a study that demonstrated the benefits of adding south facing solar spaces in buildings on the Anatolian Plateau in Turkey in order to lower the annual heating loads. This semi-arid upland region of Central Turkey is characterized by long severe winters and hot, dry summers. Two case studies were presented. One was an experimental hollow-brick office building on the edge of the capital city of Ankara. The other was a mud-brick eco-center building in the Village of Sahmurath. The thermal behaviour of the 2 solar buildings was analyzed by evaluating the real-time temperature and humidity readings obtained from data loggers. The purpose of the study was to promote energy efficient bioclimatic architecture to provide higher standards of living in villages, with the anticipation that this may contribute a low carbon high growth rural economy and attract people to rural areas. The office building has a glazed south-facing facade with adjustable openings. Materials were selected to maximize energy efficiency and reduce energy consumption. The mud-brick building was designed to use passive solar heating and to harness solar energy for food preservation with small-scale village production units. The study showed that a solar space can be influential in lowering the annual heating loads of buildings. Adding solar spaces to both buildings reduced the annual heating loads by almost 10 per cent. Additionally, the solar space could be used for drying fruit and vegetables under hygienic conditions and for longer periods than the traditional way of drying food out in the open. The solar space proved to be important to the sustenance of villagers since they were able to use the dried fruit and vegetables during winter months. 7 refs., 7 figs.

  8. Between Silence and Salience. A Multimethod Model to Study Frame Building from a Journalistic Perspective

    OpenAIRE

    Boesman, J.L.J.; Van Gorp, B.; Haenens, d', L.

    2016-01-01

    Research into frame building, which aims to investigate the development of news framing in the journalistic realm, is on the rise. While most frame-building studies focus on the relative contribution of journalists or sources to news frames, this article presents and evaluates an integrated methodological model. The model is based on constructionist premises with the purpose of examining how frames are created as part of the interaction among reporters, editors, and sources. Based on a review...

  9. Study on Effects of Building Morphology on Urban Boundary Layer Using an Urban Canopy Model

    Institute of Scientific and Technical Information of China (English)

    ZHOU Rongwei; JIANG Weimei; HE Xiaofeng; LIU Gang

    2009-01-01

    An urban canopy model is incorporated into the Nanjing University Regional Boundary Layer Model. Temperature simulated by the urban canopy model is in better agreement with the observation, especially in the night time, than that simulated by the traditional slab model. The coupled model is used to study the effects of building morphology on urban boundary layer and meteorological environment by changing urban area, building height, and building density.It is found that when the urban area is expanded, the urban boundary layer heat flux, thermal turbulence, and the turbulent momentum flux and kinetic energy all increase or enhance, causing the surface air temperature to rise up. The stability of urban atmospheric stratification is affected to different extent at different times of the day.When the building height goes up, the aerodynamic roughness height, zero plane displacement height of urban area, and ratio of building height to street width all increase. Therefore, the increase in building height results in the decrease of the surface heat flux, urban surface temperature, mean wind speed, and turbulent kinetic energy in daytime. While at night, as more heat storage is released by higher buildings, thermal turbulence is more active and surface heat flux increases, leading to a higher urban temperature.As the building density increases, the aerodynamic roughness height of urban area decreases, and the effect of urban canopy on radiation strengthens. The increase of building density results in the decrease in urban surface heat flux, momentum flux, and air temperature, the increase in mean wind speed, and the weakening of turbulence in the daytime. While at night, the urban temperature increases due to the release of more heat storage.

  10. The managers of building perceptions about the concept of organizational strategy: An exploratory study

    Directory of Open Access Journals (Sweden)

    Maurício Caetano Nedeff

    2014-10-01

    Full Text Available Organizational Strategy for companies ensures targeting and positioning strategic in the current context. However, understanding of the term, its meaning, needs further reflection on its setting to suppress doubts from the perspective of the managers. Thus, the aim of this work is to identify the image of organizational strategy from the perspective of managers linked to building, in a city of Serra Gaucha. With regard to the research method, was employed the Technical of Configuration Ideational Images (TCID, which is a variation of the ICM (Image Configuration Method; where ICM consists of a configuration technique of objects’ image more "tangible" and the TCID technique configuration of objects’ image "intangible", purely ideational (DE TONI et al., 2006. Twenty interviews were conducted with managers, in November and December of 2010. Results of this study showed 32 attributes, which were distributed among five dimensions of strategy, proposed by Mintzberg (1987, the Five Ps – plan, pretext, pattern, position and perspective. The study allows the observation image that respondents, company managers, have in relation to the concept of Organizational Strategy. Results of this study identified that the management searched for the term strategy is more related to the dimensions Plan and Perspective. Among contributions of this paper can be highlighted of propose a method that helps to better understand the configuration of a concept, in this case, the Organizational Strategy.

  11. Experimental Study on Current Decay Characteristics of Persistent Current HTS Magnet by Alternating Magnetic Field

    Science.gov (United States)

    Park, Young Gun; Lee, Chang Young; Hwang, Young Jin; Lee, Woo Seung; Lee, Jiho; Jo, Hyun Chul; Chung, Yoon Do; Ko, Tae Kuk

    This paper deals with a current decay characteristics of a high temperature superconducting (HTS) magnet operated in persistent current mode (PCM). In superconducting synchronous machine applications such as linear synchronous motor (LSM), the superconducting coil is designed to operate in the PCM to obtain steady magnetic field with DC transport current. This superconducting magnet operates on a direct current, but it can be exposed to alternating magnetic field due to the armature winding. When the magnet is subjected to an external time-varying magnetic field, it is possible to result in a decay of the current in PCM system due to AC loss. In this research, a PCM system with armature coil which generates time-varying magnetic field was fabricated to verify current decay characteristics by external alternating magnetic field. The current decay rate was measured by using a hall sensor as functions of amplitude and frequency of armature coil.

  12. Study on the factors that influence the intention of college students to participate in the green building

    Directory of Open Access Journals (Sweden)

    Hung ChienJen

    2017-01-01

    Full Text Available The concept of green building has been extended for a period of time on both sides of the Taiwan Strait. However, there still is curiosity and skepticism in Fujian on green building. While in Taiwan, villages are filled with green-evolved houses and modern environmental farmhouses. With Theory of Planned Behavior as the framework, this study investigates influences of college students’ attitude toward green building, subjective norms of green building and perceived behavioral control of green building on the intention to participate in the green building. Findings show that college students’ attitude toward green building and the perceived behavioral control of green building significantly influence the intention to participate in the green building, but “subjective norms of green building” doesn’t have significant influence. The reason is probably that college students are at the rebellious stage and have high self consciousness and independent viewpoints.

  13. The Inherent Building Energy-Cost Relationship: An Analysis of Thirty Melbourne Case Studies

    Directory of Open Access Journals (Sweden)

    Yu Lay Langston

    2012-11-01

    Full Text Available This study investigates the energy and cost performance of thirtyrecent buildings in Melbourne, Australia. Commonly, buildingdesign decisions are based on issues pertaining to constructioncost, and consideration of energy performance is made onlywithin the context of the initial project budget. Even where energyis elevated to more importance, operating energy is seen asthe focus and embodied energy is nearly always ignored. Forthe fi rst time, a large sample of buildings has been assembledand analysed to improve the understanding of both energy andcost performance over their full life cycle. The aim of this paperis to determine the relationship between energy and cost usingregression analysis for a range of building functional types.The conclusion is that energy and cost are strongly correlated,independent of building area, and equations are presented forfuture modelling of energy using cost as the independent variable.

  14. 高层建筑弱电系统安装过程分析%The Installation Process Analysis of High-rise building Weak Current System

    Institute of Scientific and Technical Information of China (English)

    肖建军

    2013-01-01

      高层建筑弱电系统安装时管线敷设复杂,布线全过程在建筑弱电系统设计安装中起着决定性作用,且安装时信息点多、作业空间大。本文主要是从布线施工、系统设备、线缆设备、网络设备等方面分析了高层建筑弱点系统安装和施工。%The piping instal ation of weak electricity system in high-rise building is complicated, wiring in the whole proce-ss of building weak current system design and instal ation pla-ys a decisive role, with instal ation information points, large working space. This paper is mainly from the aspects of const-ruction, wiring system equipment, cable equipment, network equipment, analyzes the weaknesses of the system instal ation and construction of high-rise building.

  15. Study Abroad: The Reality of Building Dynamic Group Learning.

    Science.gov (United States)

    Ransbury, Molly K.; Harris, Sandra A.

    1994-01-01

    The collaborative effort of a professor of human development with expertise in group process and a general education professor with expertise in Greek mythology and culture uses a case study format to apply theoretical models of group dynamics to the travel and learning experience of study abroad. Implications for course design and group process…

  16. Current methods for studying dynamic processes in the ionosphere

    Science.gov (United States)

    Filipp, Nikolai D.; Blaunshtein, Natan Sh.; Erukhimov, Lev M.; Ivanov, Vladimir A.; Uriadov, Valerii P.

    Current experimental and theoretical data relevant to the study of dynamic processes in the ionospheric plasma using state-of-the-art methods are summarized. The methods used include linear FM sounding, partial radio wave reflection, oblique-incidence radio wave scattering, radio wave heating of the ionosphere, plasma injection, and computer simulation of physical processes. For each specific method, experimental data are compared against theoretical predictions and numerical calculations.

  17. Pancreatic exocrine studies in intact animals: historic and current methods.

    Science.gov (United States)

    Niebergall-Roth, E; Teyssen, S; Singer, M V

    1997-12-01

    This report presents a review of the historic and current methods for performing pancreatic exocrine studies in intact animals. Special emphasis is given to the various surgical procedures--pancreatic fistulas, duodenal pouches, and duodenal fistulas--and practice of collecting pancreatic secretion in dogs. Procedures in other animal species--rat, cat, pig, rabbit, cattle, sheep, and horse--also are specified. The advantages and disadvantages, as well as the indications and limitations of the distinct methods, are discussed.

  18. A Prospective Study of Ventilation Rates and Illness Absence in California Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Eliseeva, Ekaterina A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Spears, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chan, Wanyu R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cohn, Sebastian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sullivan, Douglas P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Fisk, William J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-10-07

    Background – This study investigated the associations of ventilation rates (VRs), estimated from indoor CO2 concentrations, in offices with the amount of respiratory infections, illness absences, and building-related health symptoms in occupants. Methods – Office buildings were recruited from three California climate zones. In one or more study spaces within each building, real-time logging sensors measured carbon dioxide, temperature, and relative humidity for one year. Ventilation rates were estimated using daily peak CO2 levels, and also using an alternative metric. Data on occupants and health outcomes were collected through web-based surveys every three months. Multivariate models were used to assess relationships between metrics of ventilation rate or CO2 and occupant outcomes. For all outcomes, negative associations were hypothesized with VR metrics, and positive associations with CO2 metrics. Results – Difficulty recruiting buildings and low survey response limited sample size and study power. In 16 studied spaces within 9 office buildings, VRs were uniformly high over the year, from twice to over nine times the California office VR standard (7 L/s or 15 cfm per person). VR and CO2 metrics had no statistically significant relationships with occupant outcomes, except for a small significantly positive association of the alternative VR metric with respiratory illness-related absence, contrary to hypotheses. Conclusions– The very high time-averaged VRs in the California office buildings studied presumably resulted from “economizer cycles” bringing in large volumes of outdoor air; however, in almost all buildings even the estimated minimum VRs supplied (without the economizer) substantially exceeded the minimum required VR. These high VRs may explain the absence of hypothesized relationships with occupant outcomes. Among uniformly high VRs, little variation in contaminant concentration and occupant effects would be expected. These findings may

  19. An empirical study to find important factors on building national brand: An Iranian tourism case study

    Directory of Open Access Journals (Sweden)

    Abolghasem Hakimipour

    2012-09-01

    Full Text Available Building national brand plays an important role on today's economy to attract interested tourists in visiting various countries. There are different factors impacting national brand such as advertisement, natural attraction, etc. In this paper, we perform an empirical investigation to find the impact of ten most important factors on building brand. The study designs and distributes a questionnaire among 384 international tourists who visited Iran during the year of 2010 and it uses factor analysis to group important factors. The results extract four groups; the first factor includes three most important components including satellite advertisement programs, public awareness on economical power and public awareness on specialized symposium and conferences. The second factor includes three other important factors, which are public awareness on human right, advertisement programs through distribution brushers and internet advertisement. The third factor includes two variables, which are public awareness on education and access to educational services and introducing cultural heritage. Finally, the last factor includes introducing natural attraction and advertisement programs through distribution brushers.

  20. Current Status of Integral Medical Study on Endometriosis

    Institute of Scientific and Technical Information of China (English)

    YU Chao-qin (俞超芹); YU Jin (俞瑾)

    2003-01-01

    @@ Endometriosis (EM), an estrogen dependent disease that comes from the planting of endometrial gland and stroma outside the uterine cavity, is characterized by invasiveness, wide planting and liability to relapse. It has been proved by recent studies that the pathogenesis of EM has its genetic background and is closely related with neuro-, endocrino- and immuno-factors. There has been great progress in the treatment of EM, but the clinical effect is not yet satisfactory. Traditional Chinese medicine (TCM) has definitely played its role in EM treatment. In this article, the current status of integral medical study on EM is reviewed.

  1. Optimization and Performance Study of Select Heating Ventilation and Air Conditioning Technologies for Commercial Buildings

    Science.gov (United States)

    Kamal, Rajeev

    Buildings contribute a significant part to the electricity demand profile and peak demand for the electrical utilities. The addition of renewable energy generation adds additional variability and uncertainty to the power system. Demand side management in the buildings can help improve the demand profile for the utilities by shifting some of the demand from peak to off-peak times. Heating, ventilation and air-conditioning contribute around 45% to the overall demand of a building. This research studies two strategies for reducing the peak as well as shifting some demand from peak to off-peak periods in commercial buildings: 1. Use of gas heat pumps in place of electric heat pumps, and 2. Shifting demand for air conditioning from peak to off-peak by thermal energy storage in chilled water and ice. The first part of this study evaluates the field performance of gas engine-driven heat pumps (GEHP) tested in a commercial building in Florida. Four GEHP units of 8 Tons of Refrigeration (TR) capacity each providing air-conditioning to seven thermal zones in a commercial building, were instrumented for measuring their performance. The operation of these GEHPs was recorded for ten months, analyzed and compared with prior results reported in the literature. The instantaneous COPunit of these systems varied from 0.1 to 1.4 during typical summer week operation. The COP was low because the gas engines for the heat pumps were being used for loads that were much lower than design capacity which resulted in much lower efficiencies than expected. The performance of equivalent electric heat pump was simulated from a building energy model developed to mimic the measured building loads. An economic comparison of GEHPs and conventional electrical heat pumps was done based on the measured and simulated results. The average performance of the GEHP units was estimated to lie between those of EER-9.2 and EER-11.8 systems. The performance of GEHP systems suffers due to lower efficiency at

  2. Building Inclusive Processes for School Improvement: A Case Study

    Science.gov (United States)

    Arnaiz, Pilar; Escarbajal, Andrés; Guirao, José Manuel; Martínez, Rogelio

    2016-01-01

    This paper presents a study carried out in a nursery and primary school in order to ascertain the level of self-assessment undertaken by teachers with respect to their educational processes using the "ACADI" instrument, "School-based self-assessment of diversity awareness from an inclusive approach." The objective was to…

  3. Building a Statewide Digital Public Library: A Case Study.

    Science.gov (United States)

    Bertot, John Carlo

    2002-01-01

    Presents results of a study undertaken for the state library of Maryland to develop a process for the development of a Maryland Digital Public Library. Highlights include planning; management; implementation requirements; networked environments; technical infrastructure issues; collection development; standards; information content; information…

  4. Wind effects on `Z' plan-shaped tall building: a case study

    Science.gov (United States)

    Paul, Rajdip; Dalui, Sujit Kumar

    2016-09-01

    The present paper is centered on the study to understand the behavior of various surfaces of a `Z' plan-shaped tall building under varying wind directions. For that purpose, computational fluid dynamics (CFD) package of ANSYS is used. The length scale is considered as 1:300. Force coefficients both in the along and across wind direction as well as the external surface pressure coefficients for different faces of the object building are determined and listed for wind incidence angle 0°-150° with increment of 30°. The wind flow pattern around the building showing flow separation characteristics and vortices are presented. The variation of wind pressure on different surfaces of the building is clearly shown by contour plots. The nature of deviation of external pressure coefficients along the height of the building as well as along the perimeter of the building for different wind angles of attack is presented. The force coefficient ( C f) along the X direction is extreme for 15° wind angle and along Y direction it is maximum for 60° angle of attack. Unsteady vortices are generated in the wake region due to a combination of positive and negative pressure in the windward and leeward faces, respectively.

  5. Assessment of energy and economic performance of office building models: a case study

    Science.gov (United States)

    Song, X. Y.; Ye, C. T.; Li, H. S.; Wang, X. L.; Ma, W. B.

    2016-08-01

    Energy consumption of building accounts for more than 37.3% of total energy consumption while the proportion of energy-saving buildings is just 5% in China. In this paper, in order to save potential energy, an office building in Southern China was selected as a test example for energy consumption characteristics. The base building model was developed by TRNSYS software and validated against the recorded data from the field work in six days out of August-September in 2013. Sensitivity analysis was conducted for energy performance of building envelope retrofitting; five envelope parameters were analyzed for assessing the thermal responses. Results indicated that the key sensitivity factors were obtained for the heat-transfer coefficient of exterior walls (U-wall), infiltration rate and shading coefficient (SC), of which the sum sensitivity factor was about 89.32%. In addition, the results were evaluated in terms of energy and economic analysis. The analysis of sensitivity validated against some important results of previous studies. On the other hand, the cost-effective method improved the efficiency of investment management in building energy.

  6. Building Maintenance Management in a Malaysian University Campus: A Case Study

    Directory of Open Access Journals (Sweden)

    Olanrewaju Abdul Lateef

    2010-07-01

    Full Text Available University buildings require maintenance in order to create a conducive environment that supports and stimulates learning, teaching, innovation, and research. The prime objective of maintenance is to ensure, as far as practicable, the continued peak performance of the building throughout its design life. This paper seeks to report the maintenance management system of a university institution in Malaysia. Primary data was gathered through the analysis of a case study. The objectives of the case study are to identify, describe and assess the maintenance management system used by the university. The major conclusion drawn from the case study was that although university building maintenance practices are corrective and cyclical there is a lack of a comprehensive maintenance management framework that guides the decision-making processes. The case study also revealed irregularities in the university’s maintenance management system.

  7. Hypothesis-based research on the causes of sick building symptoms: A design for Phases 2 and 3 of the California Healthy Building Study

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, W.J.; Hodgson, A.T.; Daisey, J.M.; Faulkner, D. (Lawrence Berkeley Lab., CA (United States)); Macher, J.M. (California Dept. of Health Services, Berkeley, CA (United States). Air and Industrial Hygiene Lab.); Mendell, M.J. (National Inst. for Occupational Safety and Health, Cincinnati, OH (United States). Industrywide Studies Branch)

    1992-07-01

    The California Healthy Building Study (CHBS) is a multidisciplinary research based in 12 office buildings within California. The overall goal the CHBS is to elucidate relationships between occurrences of office worker health symptoms and characteristics of the workers' buildings, ventilation systems, work spaces, jobs, and indoor environments. A Phase-1 study was completed during 1990. The California Institute for Energy Efficiency (CIEE), through its Exploratory Research Program, supported the design of research plans for two future phases of the CHBS. The intent of the CIEE-supported effort was to design research to be conducted in the Phase-1 buildings that capitalizes on the Phase-1 research findings and also on recently-published results of research from other institutions. This report describes the research plans developed with CIEE support and presents the rationale for these research plans.

  8. Hypothesis-based research on the causes of sick building symptoms: A design for Phases 2 and 3 of the California Healthy Building Study

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, W.J.; Hodgson, A.T.; Daisey, J.M.; Faulkner, D. [Lawrence Berkeley Lab., CA (United States); Macher, J.M. [California Dept. of Health Services, Berkeley, CA (United States). Air and Industrial Hygiene Lab.; Mendell, M.J. [National Inst. for Occupational Safety and Health, Cincinnati, OH (United States). Industrywide Studies Branch

    1992-07-01

    The California Healthy Building Study (CHBS) is a multidisciplinary research based in 12 office buildings within California. The overall goal the CHBS is to elucidate relationships between occurrences of office worker health symptoms and characteristics of the workers` buildings, ventilation systems, work spaces, jobs, and indoor environments. A Phase-1 study was completed during 1990. The California Institute for Energy Efficiency (CIEE), through its Exploratory Research Program, supported the design of research plans for two future phases of the CHBS. The intent of the CIEE-supported effort was to design research to be conducted in the Phase-1 buildings that capitalizes on the Phase-1 research findings and also on recently-published results of research from other institutions. This report describes the research plans developed with CIEE support and presents the rationale for these research plans.

  9. Building International Sustainable Partnerships in Occupational Therapy: A Case Study.

    Science.gov (United States)

    Tupe, Debra Ann; Kern, Stephen B; Salvant, Sabrina; Talero, Pamela

    2015-09-01

    Occupational therapy practitioners frequently identify opportunities for international practice. The World Health Organization and the World Federation of Occupational Therapists have encouraged occupational therapists to address transnational issues, social inclusion, and equal access to opportunities grounded in meaningful occupation (WFOT, 2012). This case study describes a partnership between two U.S. schools of occupational therapy and a Cuban community based pediatric clinic. It examines the dynamics that have sustained the partnership despite political, economic, and logistical barriers. The literature is scrutinized to show how this case study fits into other accounts of collaborative international partnerships. Particularly, it investigates structural and institutional conditions that shape international sustainable partnerships. In doing so, we answer the following questions: (1) Under which circumstances do international partnerships emerge and flourish? (2) What structural and institutional conditions shape international sustainable partnerships? And (3) How do partners perceive and experience the bilateral international partnership? It also discusses and illustrates the foundations and development of international partnerships that succeed. Through the use of a case study we illustrate the development of this partnership. Finally, we consider the next steps of this particular sustainable and collaborative international partnership.

  10. Study of Buckling Restrained Braces in Steel Frame Building

    Directory of Open Access Journals (Sweden)

    Mr. Y. D. Kumbhar

    2014-08-01

    Full Text Available Conventional braces have limited deformation ductility capacity, and exhibit unsymmetrical hysteretic cycles, with marked strength deterioration when loaded in compression. To overcome the above mentioned problems, a new type of brace was developed in Japan called as buckling restrained braces, designated as BRB’s. These braces are designed such that buckling is inhibited to occur, exhibiting adequate behavior and symmetrical hysteretic curves under the action of both tensile and compressive cycles, produced by the action of seismic and wind forces. This paper presents experimental results concerning the lateral load carrying capacity of steel frame model by use of buckling restrained brace. This paper also includes the comparative study of lateral load carrying capacity of frame model for bare frame, frame with Conventional brace and frame with buckling restrained brace.

  11. Building a shared understanding of the skills and competences in order to respond to the current global technical challenges

    DEFF Research Database (Denmark)

    Friesel, Anna; Ward, Anthony; Welzer, Tatjana

    2014-01-01

    A pan-European team, including the representatives from 45 European universities, is working on an EU supported project to firstly explore and then provide models for ways in which Higher Education Institutions of Europe in the Electrical and Information Engineering disciplines can respond...... to current challenges. This paper presents the objectives and actual results of the EU supported project which runs from October 2012 to November 2015, named SALEIE - Strategic Alignment of Electrical and Information Engineering in European Higher Education Institutions. We describe in this paper...

  12. Building Networks for Science: Conflict and Cooperation in Nineteenth-Century Global Marine Studies.

    Science.gov (United States)

    Achbari, Azadeh

    2015-06-01

    In the nineteenth-century globalizing world of colonial expansion and maritime trade, systematic study of ocean currents and winds became of increased concern in various seafaring nations. Both naval officers and university professors engaged in maritime meteorological and hydrographic research. In order to attract the attention of the state and obtain support for establishment of national scientific institutes, university professors teamed up with naval officers in building networks for maritime data collection, thus connecting practical utility to academic credentials. This paper looks into the combined efforts of the U.S. Navy lieutenant M. F. Maury and the Dutch naval officer M. H. Jansen in organizing the 1853 International Maritime Conference in Brussels, which aimed to develop a worldwide system of uniform atmospheric and marine observations. Such efforts, however, amounted to walking a tightrope between mutual interests and personal rivalries. The alliance between elite scientists and naval officers proved to be only temporary. Once the meteorological institutes were established, academically trained meteorologists gradually marginalized the role of naval officers in scientific research at the institutes, thereby establishing and securing their authority in maritime science.

  13. Indoor Air Quality Assessment in a Radiantly Cooled Tropical Building: a Case Study

    Directory of Open Access Journals (Sweden)

    Qi Jie KWONG

    2015-10-01

    Full Text Available Background: Many studies have been conducted to assess the indoor air quality (IAQ of buildings throughout the world because it is closely related to comfort, safety and work productivity of occupants. However, there is still lack of available literature about IAQ in tropical buildings that apply radiant cooling systems in conditioning the indoor air.Methods: This paper reports the results obtained from an IAQ audit that was conducted in a new radiantly cooled building in Malaysia, by focusing on the IAQ and thermal comfort parameters.Results: It was identified that the measured concentration levels for the five indoor air contaminants (CO, CO2, TVOC, formaldehyde and respirable particulates were within the threshold limit values (TLVs specified in the IAQ guidelines. Besides, no significant difference was found between the contaminant levels in each floor of the studied building, and a majority of the respondents did not encounter any form of physical discomfort. There is a risk of condensation problem, judging from the measured RH level.Conclusion: An increase of airflow rate and more dehumidification work in the studied building can be made to improve IAQ and prevention of condensation problem. Nevertheless, these schemes should be implemented carefully to avoid occupants’ discomfort. Relocation of workstations was suggested, especially for the lower floors, which had higher occupancy levels. Keywords: Indoor air quality (IAQ, Radiant cooling systems, IAQ audit, Indoor air contaminants, Condensation 

  14. Sustainability assessment, rating systems and historical buildings Case study: Rehabilitated construction in a university site

    Directory of Open Access Journals (Sweden)

    Sadrykia Somayeh

    2016-01-01

    Full Text Available This paper explores the relationship between the indicators and different factors that “rating systems for green projects” concentrates on, and principles and factors considered in the rehabilitation of historical buildings. In recent years, different methods and systems concerned and improved for assessing environmental sustainability. LEED (Leadership in Energy and Environmental Design and BREEAM (Building Research Establishment (BRE Environmental Assessment Method are two most commonly used rating systems, established in U.S and UK. These systems comprise some categories and different factors to achieve environmentally responsible design. Firstly, this study focuses on the list of rating systems indicators and criteria. Secondly this paper investigates a historical rehabilitated building in the site of Tabriz Art University, as a case study and has tried to compile its green design elements. Finally, this work intends to compare mentioned elements with indicators and factors of building rating systems. Findings of the study revealed that “Materials and Resources”, “indoor environmental quality” and also “Sustainable Sites” ,the most significant indicator of rating systems, had major and important role in the rehabilitation of the building. Beyond this materials’ life cycle was considerable in construction.

  15. Building a foundation to study distributed information behaviour

    Directory of Open Access Journals (Sweden)

    Terry L. von Thaden

    2007-01-01

    Full Text Available Introduction. The purpose of this research is to assess information behaviour as it pertains to operational teams in dynamic safety critical operations. Method. In this paper, I describe some of the problems faced by crews on modern flight decks and suggest a framework modelled on Information Science, Human Factors, and Activity Theory research to assess the distribution of information actions, namely information identification, gathering and use, by teams of users in a dynamic, safety critical environment. Analysis. By analysing the information behaviour of crews who have accidents and those who do not, researchers may be able to ascertain how they (fail to make use of essential, safety critical information in their information environment. The ultimate goal of this research is to differentiate information behaviour among the distinct outcomes. Results. This research affords the possibility to discern differences in distributed information behaviour illustrating that crews who err to the point of an accident appear to practice different distributed information behaviour than those who do not. This foundation serves to operationalise team sense-making through illustrating the social practice of information structuring within the activity of the work environment. Conclusion. . The distributed information behaviour framework provides a useful structure to study the patterning and organization of information distributed over space and time, to reach a common goal. This framework may allow researchers and investigators alike to identify critical information activity in the negotiation of meaning in high reliability safety critical work, eventually informing safer practice. This framework is applicable to other domains.

  16. Building qualitative study design using nursing's disciplinary epistemology.

    Science.gov (United States)

    Thorne, Sally; Stephens, Jennifer; Truant, Tracy

    2016-02-01

    To discuss the implications of drawing on core nursing knowledge as theoretical scaffolding for qualitative nursing enquiry. Although nurse scholars have been using qualitative methods for decades, much of their methodological direction derives from conventional approaches developed for answering questions in the social sciences. The quality of available knowledge to inform practice can be enhanced through the selection of study design options informed by an appreciation for the nature of nursing knowledge. Discussion paper. Drawing on the body of extant literature dealing with nursing's theoretical and qualitative research traditions, we consider contextual factors that have shaped the application of qualitative research approaches in nursing, including prior attempts to align method with the structure and form of disciplinary knowledge. On this basis, we critically reflect on design considerations that would follow logically from core features associated with a nursing epistemology. The substantive knowledge used by nurses to inform their practice includes both aspects developed at the level of the general and also that which pertains to application in the unique context of the particular. It must be contextually relevant to a fluid and dynamic healthcare environment and adaptable to distinctive patient conditions. Finally, it must align with nursing's moral mandate and action imperative. Qualitative research design components informed by nursing's disciplinary epistemology will help ensure a logical line of reasoning in our enquiries that remains true to the nature and structure of practice knowledge. © 2015 John Wiley & Sons Ltd.

  17. Paying research participants: a study of current practices in Australia.

    Science.gov (United States)

    Fry, C L; Ritter, A; Baldwin, S; Bowen, K J; Gardiner, P; Holt, T; Jenkinson, R; Johnston, J

    2005-09-01

    To examine current research payment practices and to inform development of clearer guidelines for researchers and ethics committees. Exploratory email based questionnaire study of current research participant reimbursement practices. A diverse sample of organisations and individuals were targeted. Australia. Contacts in 84 key research organisations and select electronic listservers across Australia. A total of 100 completed questionnaires were received with representations from a variety of research areas (for example, market, alcohol and drug, medical, pharmaceutical and social research). Open-ended and fixed alternative questions about type of research agency; type of research; type of population under study; whether payment is standard; amounts and mechanisms of payment; factors taken into account when deciding on payment practices; and whether payment policies exist. Reimbursement practice is highly variable. Where it occurs (most commonly for drug dependent rather than health professional or general population samples) it is largely monetary and is for time and out-of-pocket expenses. Ethics committees were reported to be often involved in decision making around reimbursement. Research subject payment practices vary in Australia. Researchers who do provide payments to research participants generally do so without written policy and procedures. Ethics committees have an important role in developing guidelines in this area. Specific guidelines are needed considering existing local policies and procedures; payment models and their application in diverse settings; case study examples of types and levels of reimbursement; applied definitions of incentive and inducement; and the rationale for diverse payment practices in different settings.

  18. Current Mathematical Methods Used in QSAR/QSPR Studies

    Directory of Open Access Journals (Sweden)

    Peixun Liu

    2009-04-01

    Full Text Available This paper gives an overview of the mathematical methods currently used in quantitative structure-activity/property relationship (QASR/QSPR studies. Recently, the mathematical methods applied to the regression of QASR/QSPR models are developing very fast, and new methods, such as Gene Expression Programming (GEP, Project Pursuit Regression (PPR and Local Lazy Regression (LLR have appeared on the QASR/QSPR stage. At the same time, the earlier methods, including Multiple Linear Regression (MLR, Partial Least Squares (PLS, Neural Networks (NN, Support Vector Machine (SVM and so on, are being upgraded to improve their performance in QASR/QSPR studies. These new and upgraded methods and algorithms are described in detail, and their advantages and disadvantages are evaluated and discussed, to show their application potential in QASR/QSPR studies in the future.

  19. Current management of bronchiectasis: review and 3 case studies.

    Science.gov (United States)

    Silverman, Enid; Ebright, Linda; Kwiatkowski, Marianne; Cullina, Joanne

    2003-01-01

    Bronchiectasis is the abnormal, irreversible dilatation of diseased bronchi. Permanently dilated airways, usually in the medium-sized bronchi, are inflamed and often obstructed with thick, purulent secretions. Known causative factors include postinfection bronchial damage, postinhalation injury, hypersensitivity reactions, and congenital airway obstructive disorders. Typical symptoms include sputum overproduction, fever, pleurisy, dyspnea, and chronic cough. Diagnosis involves radiographic studies and pulmonary function testing. Treatment includes oral, aerosolized, or intravenous antibiotic therapy according to the severity of the exacerbation, and mucus clearance by means of bronchial hygiene assistive devices, chest physiotherapy, postural drainage, and high-frequency chest compression. We present a review of bronchiectasis and offer 3 case studies illustrating current management of different presentations, including use of aerosolized antibiotics for patients infected with Pseudomonas aeruginosa. Although an adjunctive program of pulmonary rehabilitation may be useful for patients with bronchiectasis, no confirming studies have been performed to date, and additional research in this area is warranted.

  20. Indoor carbon dioxide concentrations and sick building syndrome symptoms in the BASE study revisited: Analyses of the 100 building dataset

    Energy Technology Data Exchange (ETDEWEB)

    Erdmann, Christine A.; Steiner, Kate C.; Apte, Michael G.

    2002-02-01

    In previously published analyses of the 41-building 1994-1996 USEPA Building Assessment Survey and Evaluation (BASE) dataset, higher workday time-averaged indoor minus outdoor CO{sub 2} concentrations (dCO{sub 2}) were associated with increased prevalence of certain mucous membrane and lower respiratory sick building syndrome (SBS) symptoms, even at peak dCO{sub 2} concentrations below 1,000 ppm. For this paper, similar analyses were performed using the larger 100-building 1994-1998 BASE dataset. Multivariate logistic regression analyses quantified the associations between dCO{sub 2} and the SBS symptoms, adjusting for age, sex, smoking status, presence of carpet in workspace, thermal exposure, relative humidity, and a marker for entrained automobile exhaust. Adjusted dCO{sub 2} prevalence odds ratios for sore throat and wheeze were 1.17 and 1.20 per 100-ppm increase in dCO{sub 2} (p <0.05), respectively. These new analyses generally support our prior findings. Regional differences in climate, building design, and operation may account for some of the differences observed in analyses of the two datasets.

  1. The Influence of Clients’ Qualities on Green Design Performance of Building Projects in Malaysia-Descriptive Study

    Directory of Open Access Journals (Sweden)

    Mohamed S. Elforgani

    2012-01-01

    Full Text Available Problem statement: In the construction industry, success of building projects greatly depends on the client’s performance. The performance of clients is crucial since decisions made will influence the overall project performance. Typically, clients are represented by managerial and technical representatives during the design process. They play major roles in conveying required information to the design team regarding their future project. The quality of clients’ representatives has potential influence on design team performance. In designing green buildings client’s attributes are critical factors to high performance of building projects. Attributes such as knowledge and experience on green buildings, commitment level to green and clients’ ability to participate and manage design process are the key factors to produce green design. The propose of this study to identify current performance level of clients of building projects and establish key clients’ attributes influencing green design performance. Approach: To achieve mentioned aim a questionnaire survey was conducted to collect dada required. A sample of 274 respondents has been covered under the study, including architects and engineers practicing design and consultancy building sectors. Prior to analysis of data WINSTEPS software were used for Rasch modeling to determine validity and reliability of date. Descriptive analysis data includes quantitative and qualitative. Results and Conclusion: Client qualities in general were low, client communication with design team; client involvement and ability to coordinate design process were moderate. However, Knowledge and experience on green design, client organization commitment to green and commitment in financing green design were low. The result indicates that most building clients have inadequate knowledge to manage design green buildings. Therefore, more education and training courses on green building are needed to

  2. Environmental Assessment Methodologies for Commercial Buildings: An Elicitation Study of U.S. Building Professionals’ Beliefs on Leadership in Energy and Environmental Design (LEED

    Directory of Open Access Journals (Sweden)

    Jasmin Kientzel

    2011-12-01

    Full Text Available Voluntary environmental programs (VEPs have become increasingly popular around the world to address energy efficiency issues that mandatory building codes have not been able to tackle. Even though the utility of voluntary schemes is widely debated, they have become a de facto reality for many professionals in the building and construction sector. One topic that is neglected, however, in both academic and policy discussions, relates to how professionals (architects, engineers, real estate developers, etc. perceive the rise of voluntary rating schemes. In order to fill this gap in the literature, the present study investigates beliefs underlying adoption behavior regarding one of the most prominent voluntary assessment and certification programs in the U.S. building industry, the Leadership in Energy and Environmental Design (LEED scheme. In this paper, an elicitation study, based on 14 semi-structured interviews with building professionals in the North East of the United States, was conducted to analyze this question. Building on the Reasoned Action Approach, this paper shows that, in addition to more conventional factors such as financial calculations and marketing aspects, the understanding of beliefs held by building professionals offers important insights into their decisions to work with Voluntary Environmental Assessment and Rating Programs.

  3. Improving Thermal Performance of a Residential Building, Related to Its Orientations - A Case Study

    Science.gov (United States)

    Akshaya, S.; Harish, S.; Arthy, R.; Muthu, D.; Venkatasubramanian, C.

    2017-07-01

    Urban planners and stakeholders require knowledge about the effectiveness of city-scale climate adaptation measures in order to develop climate resilient cities and to push forward the political process for the implementation of climate adaptation strategies. This study examines the impact of modifications in orientation of buildings with respect to heat load. Heat load calculation is a mathematical process to determine the best capacity, application and style of HVAC system. The purpose is to ensure energy efficiency while also maximizing comfort inside the building. This study of load calculation is essential for a building because it helps to pick the best orientation and focuses to find an orientation that will reduce energy due to direct solar radiation. One of the factors affecting this assessment is the latitude of the location. The heat gain is effective through walls and fenestration. Improper management through ineffective orientation of the building’s natural heat gain leads to excessive consumption of energy in the form of CL. The total heat gain for the above factors is calculated with the equations and assumptions as per ASHRAE code. After the calculation of heat load for different orientations, the best suited orientation of the building is found. By altering the building to suitable orientation, the dependence on electrical equipment can be minimized and thereby helps in energy conservation.

  4. Sustainability and satisfaction : findings from field studies of office buildings in the UK and India

    Energy Technology Data Exchange (ETDEWEB)

    Manchanda, S. [Cambridge Univ., Cambridge (United Kingdom). Martin Centre for Architectural and Urban Studies; Steemers, K. [Cambridge Univ., Cambridge (United Kingdom). Dept. of Architecture

    2009-07-01

    Ventilation and air-conditioning constitute the prime consumers of energy in buildings, largely because these services require high energy mechanical systems to meet satisfactory thermal and indoor air quality requirements for occupants. However, growing concerns regarding energy security and the environment raise certain questions in relation to the justification of these high levels of energy use by buildings. This paper explored the relationship between the use of energy by buildings, and their performance in terms of the satisfaction of the end-user and the key determinants and influencing factors. The authors questioned whether high levels of energy use in buildings are really necessary for delivering a better environment and satisfaction for the end-user. They also questioned to what extent occupant satisfaction depends on parameters affected by energy use. In general, the study concluded that energy use in buildings and user satisfaction are not necessarily related. The study suggested that high levels of satisfaction can be achieved with low energy design, and at a broad level. It pointed out critical environmental criteria and pertinent psychological mechanisms that can be used to maximize satisfaction while limiting energy use. Alternatives for sustainable design and improved occupant satisfaction were explored. 14 refs., 2 tabs., 4 figs.

  5. Building Energy and Cost Performance: An Analysis of Thirty Melbourne Case Studies

    Directory of Open Access Journals (Sweden)

    Yu Lay Langston

    2012-11-01

    Full Text Available This study investigates the energy and cost performance of thirty recent buildings in Melbourne, Australia. Commonly, building design decisions are based on issues pertaining to construction cost, and consideration of energy performance is made only within the context of the initial project budget. Even where energy is elevated to more importance, operating energy is seen as the focus and embodied energy is nearly always ignored. For the first time, a large sample of buildings has been assembled and analyzed to improve the understanding of both energy and cost performance over their full life cycle, which formed the basis of a wider doctoral study into the inherent relationship between energy and cost. The aim of this paper is to report on typical values for embodied energy, operating energy, capital cost and operating cost per square metre for a range of building functional types investigated in this research. The conclusion is that energy and cost have quite different profiles across projects, and yet the mean GJ/m2 or cost/m2 have relatively low coefficients of variation and therefore may be useful as benchmarks of typical building performance.  

  6. Perceived Comfort of Indoor Environment and Users' Performance in Office Building with Smart Elements - case Study

    Science.gov (United States)

    Pilipová, Ivana; Vilčeková, Silvia

    2013-11-01

    A greater degree of awareness of comfort and productivity of building users according to post-occupancy evaluation and feedback of users in intelligent buildings is necessary. This report presents a summary of the results from a physical measurements, a post-occupancy evaluation study on perceived comfort of indoor environment and self-evaluation of occupant's performance in the new multifunctional 5 floor-building in city of Kosice, Slovakia. There were investigated degree of perceived comfort and user's performance with regard to objective measurement, respondents' response and building character. This case study has highlighted that influence of monitored factors of building with smart elements is positively received and wasn't determined their negative impact on perceived comfort of indoor environment and occupants' performance. Results show that respondents are mostly satisfied with their indoor environment conditions of workplace. Interviews with respondents detected they have not been perceived (negative) factors in workplace because they have been too concentric on the work and they have not felt discomfort.

  7. Marketing for green building; Marketing fuer oekologisches Bauen. Ergebnisse einer Studie zum SynergieHaus-Projekt

    Energy Technology Data Exchange (ETDEWEB)

    Winkler, S.; Niedergesaess, U. [imug Beratungsgesellschaft mbH, Hannover (Germany)

    2001-03-12

    Ecological or green building becomes increasingly relevant in Germany. Of specific concern are the following questions that are considered more closely in the following article: Who are the customers or builder-owners of low energy houses? How to involve and motivate potential customers for this environmental form of building? What are the central motives in buying or building low energy houses and how to address private households with the issue of ecological building and living? These questions are discussed with reference to the results of a study carried out in the context of a specific green building sponsoring project named ''SynergieHaus''. (orig./CB) [German] Oekologisches Bauen gewinnt in Deutschland zunehmend an Bedeutung. Wer aber sind die Kaeufer bzw. Bauherren von Niedrigenergiehaeusern? Wie koennen Bauinteressenten fuer diese umweltorientierte Form des Bauens begeistert und gewonnen werden? Welches sind die zentralen Motive fuer den Kauf eines Niedrigenergiehauses bzw. wie koennen private Haushalte fuer oekologisches Bauen und Wohnen angesprochen werden? Diese marketingrelevanten Fragen werden in dem Beitrag naeher betrachtet anhand von Ergebnissen einer Studie zum SynergieHaus-Projekt. (orig./CB)

  8. Simulation studies of direct-current microdischarges for electric propulsion

    Science.gov (United States)

    Deconinck, Thomas Dominique

    The structure of direct-current microdischarges is investigated using a detailed two-dimensional multi-species continuum model. Microdischarges are direct-current discharges that operate at a relatively high pressure of about 100 Torr and geometric dimensions in the 10-100 micrometer range. Our motivation for the study of microdischarges comes from a potential application of these devices in microthrusters for small satellite propulsion. The Micro Plasma Thruster (MPT) concept consists of a direct-current microdischarge in a geometry comprising a constant area flow section followed by a diverging exit nozzle. A detailed description of the plasma dynamics inside the MPT including power deposition, ionization, coupling of the plasma phenomena with high-speed flow, and propulsion system performance is reported in this study. A two-dimensional model is developed as part of this study. The model consists of a plasma module coupled to a flow module and is solved on a hybrid unstructured mesh framework. The plasma module provides a self-consistent, multi-species, multi-temperature description of the microdischarge phenomena while the flow module provides a description of the low Reynolds number compressible flow through the system. The plasma module solves conservation equations for plasma species continuity and electron energy, and Poisson's equation for the self-consistent electric field. The flow module solves mass, bulk gas momentum and energy equations. The coupling of energy from the electrostatic field to the plasma species is modeled by the Joule heating term which appears in the electron and heavy species energy equations. Discretization of the Joule heating term on unstructured meshes requires special attention. We propose a new robust method for the numerical discretization of the Joule heating term on such meshes using a cell-centered, finite volume approach. A prototypical microhollow cathode discharge (MHCD) is studied to guide and validate the modeling

  9. Implementing Occupant Behaviour in the Simulation of Building Energy Performance and Energy Flexibility: Development of Co-Simulation Framework and Case Study

    DEFF Research Database (Denmark)

    Li, Rongling; Wei, Feng; Zhao, Yang

    2017-01-01

    ), and sensor based control (SBC) triggered by dynamic electricity price under demand side management (DSM) program. The building energy performance in the OC scenario is then used as reference to evaluate the building energy (cost) saving and energy flexibility. This is an improvement of current studies on DSM......Occupant behaviour has a substantial impact on the prediction of building energy performance. To capture this impact, co-simulation is considered an effective approach. It is still a new method in need of more development. In this study, a co-simulation framework is established to couple EnergyPlus...... with Java via Functional Mock-up Interface (FMI) using the EnergyPlusToFMU software package. This method is applied to a case study of a single occupant office with control of lighting, plug load and thermostat. Two control scenarios are studied. These are occupancy and occupant behaviour based control (OC...

  10. Current Conceptual Challenges in the Study of Rhythm Processing Deficits

    Directory of Open Access Journals (Sweden)

    Pauline eTranchant

    2015-06-01

    Full Text Available Interest in the study of rhythm processing deficits (RPD is currently growing in the cognitive neuroscience community, as this type of investigation constitutes a powerful tool for the understanding of normal rhythm processing. Because this field is in its infancy, it still lacks a common conceptual vocabulary to facilitate effective communication between different researchers and research groups. In this commentary, we provide a brief review of recent reports of RPD through the lens of one important empirical issue: the method by which beat perception is measured, and the consequences of method selection for the researcher’s ability to specify which mechanisms are impaired in RPD. This critical reading advocates for the importance of matching measurement tools to the putative neurocognitive mechanisms under study, and reveals the need for effective and specific assessments of the different aspects of rhythm perception and synchronization.

  11. Experimental study of dynamic effects in moisture transfer in building materials

    DEFF Research Database (Denmark)

    Janssen, Hans; Scheffler, Gregor Albrecht; Plagge, Rudolf

    2016-01-01

    of the moisture transfer processes involved. The available evidence primarily stems from imbibition and drainage experiments on soils however, and compared to many other porous media, these tests consider rather permeable materials with relatively dominant liquid transport at comparatively large (de......)saturation rates. The current knowledge may thus not be directly transferable to moisture transfer in porous media on the whole, and dedicated further research is required. This paper responds to that need, by reporting on an experimental investigation of the occurrence of dynamic effects on moisture transfer...... in building materials. Drying and ad-/desorption tests are executed on two building materials, in which moisture contents and moisture potentials are measured simultaneously. These are translated into dynamic retention relations and dynamic storage coefficients, which both distinctly demonstrate that moisture...

  12. A Study of the Renewal Cycle of Hotel Building Elements in Malaysia

    Directory of Open Access Journals (Sweden)

    Zhen Wei

    2014-01-01

    Full Text Available Penang is the main tourism island which appeals an increasing number of travellers each year. Therefore, the hotels in Penang play a crucial role in the field of Penang tourism. However, recently some problems with the Penang hotels have been brought to light frequently by travellers including domestic and foreign tourists. The reason for this may be due to irregular maintenance as well as the fact that the renewal of the building elements may not have been duly carried out. In light of that, this research investigated the condition of the maintenance and renewal cycle of the building elements of the hotels in Penang. This study was conducted with a quantitative method, using a questionnaire to collect information regarding the condition of maintenance, evaluation of the condition of the building elements and the frequency of building elements renewal. The results revealed that each building element renewal cycle is differing according to the effects of maintenance and its lifespan. In terms of comparison with the renewals in Singapore hotels, there are shortcomings involved in the schedule of element renewals carried out in Penang.

  13. Analysing Legibility of Space in Office Buildings: Case Studies in Kerman, Iran

    Directory of Open Access Journals (Sweden)

    Sahar Soltani

    2016-07-01

    Full Text Available Most people spend a substantial amount of time at work. Despite this significant role, office buildings incur some functional and environmental problems for users, one of the most critical of which is to access and move easily through them regarding their mostly complicated spatial configuration. The aim of this study is to understand the relationship between legibility and different building typology in addition to achieving some design patterns by comparing them. In this connection, the role of physical context and different design typology of some office buildings in Kerman have been investigated with the aim of analyzing interior legibility and way finding. Accordingly, observation and interviews were conducted to complete the evidences found from VGA results of the space syntax software along with self - administered questionnaires of employees and clients. The results based on the analysis of the strengths and weaknesses of these office buildings in terms of legibility and way finding suggest some recommendations and guidelines so that they can contribute to promoting the future of office buildings design

  14. Experimental Study on the Comparison of the Material Properties of Glass Wool Used as Building Materials

    Directory of Open Access Journals (Sweden)

    Kyoung-Woo KIM

    2014-04-01

    Full Text Available Artificial mineral fibers such as glass wool or stone wool are commonly used in building walls, ceilings and floors as a major insulation material for buildings. Among the material properties of building materials, thermal conductivity, the sound absorption coefficient, compressibility, and dynamic stiffness are regarded as important performance requirements since they directly affect the thermal and acoustic properties of the building. This study measured the changes of the thermal and acoustical performances of glass wool that was actually installed for a long time to the outer wall of a building as an insulation material through a comparison with recently produced glass wool. The results showed that the measured thermal conductivities of the old and the new specimens both rise with an increase of temperature, showing quite similar results in both specimens over temperature ranges of (0 – 20 ºC. The noise reduction coefficient decreased by 0.1 in the old specimen and the difference of the compressibilities in both specimens was shown to be 7.32 mm. The dynamic stiffness of the old specimen was found to be 1.28 MN/m3 higher than that of the new specimen.DOI: http://dx.doi.org/10.5755/j01.ms.20.1.3714

  15. CURRENT STUDY ON THE FUNDING SOURCES COVERAGE OF CURRENT ASSETS TO COMPANIES LISTED ON THE BUCHAREST STOCK EXCHANGE

    Directory of Open Access Journals (Sweden)

    Teodor HADA

    2014-06-01

    Full Text Available This paper presents issues about the coverage with financing sources of current assets for 64 companies listed on the Bucharest Stock Exchange. The aim of the study is to see how to calculate indicators specific to current assets and the general framework offered as whole analysis of the financing sources of current assets. The introduction of the paper presents the objective, the research methodology and the novelties brought by this study. Further on, this study shows the various views of the authors about the concept of "current assets", financing sources of current assets, the calculation of net working capital, setting the limits of the normal working capital and determining the speed of rotation. After that was done, based on the theory, a case study was performed, for companies covered in this study. Conclusions focused on determining the final data about what was detailed in the previous paragraphs.

  16. Building information deduced

    DEFF Research Database (Denmark)

    Tamke, Martin; Myrup Jensen, Morten; Beetz, Jakob

    2014-01-01

    that in practice models are no longer solely observed as culmination of knowledge in a 3d representation of future built structures, but as a source of information in itself. Experienced users of BIM want to Find Information within a model or across a set of these and Compare models in order to evaluate states......In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show...... of a model, differences in separate models or models from different point of time. Current BIM tools support both modes only in a rudimentary form. This paper discusses current modes of information query within and across BIM models, shows beneficial scenarios for building and planning practice through...

  17. Building information deduced

    DEFF Research Database (Denmark)

    Tamke, Martin; Myrup Jensen, Morten; Beetz, Jakob

    2014-01-01

    In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show...... of a model, differences in separate models or models from different point of time. Current BIM tools support both modes only in a rudimentary form. This paper discusses current modes of information query within and across BIM models, shows beneficial scenarios for building and planning practice through...... that in practice models are no longer solely observed as culmination of knowledge in a 3d representation of future built structures, but as a source of information in itself. Experienced users of BIM want to Find Information within a model or across a set of these and Compare models in order to evaluate states...

  18. Preliminary study on the energy coefficients of buildings; Vorstudie zur Erhebung von Energiekennzahlen von Wohnbauten

    Energy Technology Data Exchange (ETDEWEB)

    Dettli, R.; Bade, S. [Econcept AG, Zuerich (Switzerland); Baumgartner, A.; Bleisch, M. [Amstein und Walthert, Zuerich (Switzerland)

    2007-11-15

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of a preliminary study concerning the definition of a method for the cost-effective and reliable collection of data and the calculation of energy coefficients for residential buildings in Switzerland. On the basis of data already collected, typical coefficients for various types of building are proposed. Also, reasons for considerable differences between the data of various Swiss Cantons are investigated. Requirements and criteria for the judgement of the energy coefficients are discussed and the methods used by various Swiss cities and Cantons are reviewed. A comprehensive appendix completes the report.

  19. Study of an experimental methodology for thermal properties diagnostic of building envelop

    Science.gov (United States)

    Yang, Yingying; Sempy, Alain; Vogt Wu, Tingting; Sommier, Alain; Dumoulin, Jean; Batsale, Jean Christophe

    2017-04-01

    The building envelope plays a critical role in determining levels of comfort and building efficiency. Its real thermal properties characterization is of major interest to be able to diagnose energy efficiency performance of buildings (new construction and retrofitted existing old building). Research and development on a possible methodology for energy diagnostic of the building envelop is a hot topic and necessary trend. Many kinds of sensors and instruments are used for the studies. The application of infrared (IR) thermography in non-destructive evaluation has been widely employed for qualitative evaluations for building diagnostics; meanwhile, the IR thermography technology also has a large potentiality for the evaluation of the thermal characteristics of the building envelope. Some promising recent research studies have been carried out with such contactless measurement technique. Nevertheless, research efforts are still required for in situ measurements under natural environmental conditions. In order to develop new solutions for non-intrusive evaluation of local thermal performance, enabling quantitative assessment of thermal properties of buildings and materials, experiments were carried out on a multi-layer pratical scale wall fixed on a caisson placed in a climatic chamber. Six halogen lamps (1.5 kW for each lamp) placed in front of objective wall were used to emulate sunny conditions. The radiative heat flux emitted was monitored and modulated with time according to typical weather data set encountered in France. Both steady state and transient regime heat transfer were studied during these experiments. Contact sensors (thermocouples, heat flux meters, Peltier sensors) and non-contact sensors (thermal IR camera, pyranometer) were used to measure the temperatures and heat flux density evolution. It has to be noticed that the Peltier sensors have been tuned and used with a specific processing to set them compliant for heat flux density measurements. The

  20. Investigation of Foundation Failure of a Residential Building – A Case Study

    Directory of Open Access Journals (Sweden)

    D. Nagarajan

    2014-04-01

    Full Text Available Movement and distress in low rise building most commonly occur as a result of interaction between the footing system and the ground. This summarizes the study that is carried out to evaluate the possible causes of distress in the G+1 residential building founded on shallow foundation in Chennai, Tamilnadu, India by Detailed Investigation. Disturbed and Undisturbed samples are collected by drilling borehole up to significant depth by auger. Laboratory tests are carried out on disturbed and undisturbed soil samples obtained from the site of distressed building. The cause of failure of the structure are identified by considering the soil properties, intensity of loading, nature of foundation and pattern of cracks developed. Based on the degree of distress, the suitable measures are recommended.

  1. Experimental study of blockage of monochromatic waves by counter currents

    NARCIS (Netherlands)

    Suastika, I.K.

    1999-01-01

    Blockage of waves by a current can occur if waves are propagating on a spatially varying opposing current in which the velocity is increasing in the wave propagation direction. The ongoing waves become shorter and steeper while they are propagating against the current. Blocking occurs at the

  2. Urban temperature analysis and impact on the building cooling energy performances: an Italian case study

    Directory of Open Access Journals (Sweden)

    Michele Zinzi

    2016-06-01

    Full Text Available Climate changes and urban sprawl are dramatically increasing the heat island effect in urban environments, whatever the size and the latitude are, affecting these latter parameters the effect intensity. The urban heats island is a phenomenon observed since the last decades of the XIX century but demonstrated at large scale only one century later, characterised by the increase of air temperature in densely built urban environments respect to the countryside surround cities. Many studies are available, showing urban heat island intensities up to 12°C. This thermal stress causes social, health and environmental hazards, with major consequences on weaker social classes, as elderly and low income people, it is not by chance that survey demonstrated the increase of deaths in such categories during intense and extended heat waves. This study presents the firs results on the observation of air temperature measures in different spots of Rome, city characterised by a typical Mediterranean climate and by a complex urban texture, in which densely built areas are kept separated by relatively green or not-built zones. Six spots are monitored since June 2014 and include: historical city centre, semi-central zones with different construction typologies, surrounding areas again with various urban and building designs. The paper is focused on the analysis of summer temperature profiles, increase respect to the temperature outside the cities and the impact on the cooling performance of buildings. Temperature datasets and a reference building model were inputted into the well-known and calibrated dynamic tool TRNSYS. Cooling net energy demand of the reference building was calculated, as well as the operative temperature evolution in the not cooled building configuration. The results of calculation allow to compare the energy and thermal performances in the urban environment respect to the reference conditions, usually adopted by building codes. Advice and

  3. A Preliminary Study of the Western Zhou Building Foundations at Yuntang in Fufeng, Shaanxi

    Institute of Scientific and Technical Information of China (English)

    徐良高; 王巍; 丁晓雷

    2003-01-01

    From autumn 1999 through the year 2000, Zhouyuan Archaeological Team excavated a set of Western Zhou building foundations, which was well preserved and uniquely designed. It is significantly valuable for the research on the ritual system of the Western Zhou Dynasty. We here by try to make a preliminary study on its structure and function with reference of historical literature.

  4. Building a Culture of Innovation: A Case Study in Digital Integration

    Science.gov (United States)

    VonBank, Anthony H.

    2013-01-01

    This case study dissertation examines the implementation of digital technology in a mid-sized public school district in southern Minnesota. The methodology involved unstructured interviews and close observation of several teachers, administrators and related staff in the junior-senior high building. These observations were presented in informative…

  5. Highlighting High Performance Buildings: Adam Joseph Lewis Center for Environmental Studies

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-11-01

    Oberlin College's Adam Joseph Lewis Center for Environmental Studies is a high-performance building featuring an expansive photovoltaic system and a closed-loop groundwater heat pump system. Designers incorporated energy-efficient components and materials that are local, non-toxic, and durable.

  6. Developing Reflective Dispositions through Collaborative Knowledge-Building during Small Group Bible Study

    Science.gov (United States)

    Toh, Tze Keong; Koh, Joyce Hwee Ling; Chai, Ching Sing

    2017-01-01

    This article explores the use of a constructivist pedagogical approach to cultivate reflective dispositions during small group Bible study. Conducted in a local church Bible class setting (n = 12), the instructional design emulated the reflective thinking process, while adopting collaborative knowledge-building as its pedagogical framework.…

  7. The Road to Evaluation Capacity Building: A Case Study from Israel

    Science.gov (United States)

    Rosenstein, Barbara; Englert, Pnina Elal

    2008-01-01

    We present an empirical case study of an Evaluation Capacity Building (ECB) initiative in a school in Israel. First, we tell the story of the school's 10-year journey toward the successful integration of evaluation through ECB. Then we examine the case according to King's (2002) four elements of ECB: teachers, students, the curriculum, and the…

  8. Building Excellence in Communication Studies: Illinois Speech Communication 1975-1995 as Exemplar.

    Science.gov (United States)

    Delia, Jesse G.

    1999-01-01

    Comments on building departmental excellence through creating conditions for development of the focus that emerged at the Speech Communication Department at the University of Illinois. Considers how the constructivist turn in communication studies at Illinois in the late 1970s and early 1980s underscores the value of multiple-group cluster hiring…

  9. Solution scattering studies on a virus capsid protein as a building block for nanoscale assemblies

    NARCIS (Netherlands)

    Comellas Aragones, M.; Comellas-Aragones, Marta; Sikkema, Friso D.; Delaittre, Guillaume; Terry, Ann E.; King, Stephen M.; Visser, Dirk; Heenan, Richard K.; Nolte, Roeland J.M.; Cornelissen, Jeroen Johannes Lambertus Maria; Feiters, Martin C.

    2011-01-01

    Self-assembled protein cages are versatile building blocks in the construction of biomolecular nanostructures. Because of the defined assembly behaviour the cowpea chlorotic mottle virus (CCMV) protein is often used for such applications. Here we report a detailed solution scattering study of the

  10. Building a Culture of Evidence: A Case Study of a California Community College

    Science.gov (United States)

    Baker, Jill H.; Sax, Caren L.

    2012-01-01

    The purpose of this study was to better understand the practices associated with building a culture of evidence and to identify the factors influencing the success of such an endeavor. By definition, a culture of evidence is based upon practices employing data and research to inform decision making at all levels of the institution, with the…

  11. A Descriptive Study of a Building-Based Team Problem-Solving Process

    Science.gov (United States)

    Brewer, Alexander B.

    2010-01-01

    The purpose of this study was to empirically evaluate Building-Based Teams for General Education Intervention or BBT for GEI. BBT for GEI is a team problem-solving process designed to assist schools in conducting research-based interventions in the general education setting. Problem-solving teams are part of general education and provide support…

  12. Energetic optimization study - Julio Soares building; Estudo de otimizacao energetica Edificio Julio Soares

    Energy Technology Data Exchange (ETDEWEB)

    Burgoa, Jaime Antonio; Moura, Ricardo Cerqueira; Brescia, Celso [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil)

    1994-12-31

    This work presents the results obtained by the energetic optimization study performed in CEMIG`s, the electric power company of Minas Gerais State - Southeast Brazil, main building with cooperation of PROCEL , the national program of electric power conservation. the methodology is presented. The expected benefits are presented 6 refs., 1 fig.; 6 tabs.

  13. Integrating Rapport-Building into Language Instruction: A Study of Korean Foreign Language Classes

    Science.gov (United States)

    Park, Mi Yung

    2016-01-01

    Using a conversation-analytic approach along with the notions of frame and footing (Goffman 1981), this study examines what strategies teachers use to build rapport with their students in Korean as a foreign language classrooms. It also discusses what kinds of interactional resources they employ in tandem with these strategies. Analysis of…

  14. A Site-specific Study of In-building Wireless Solutions

    DEFF Research Database (Denmark)

    Liu, Zhen; Sørensen, Troels Bundgaard; wigard, jeroen

    2010-01-01

    This paper studies the different ways of extending wireless coverage for high data rates and improving the data capacity in a building. The solutions considered include deployments of single or multiple small base stations, i.e. Picocell or Femtocell, and distributed antenna system, operated...

  15. Optical timing studies of isolated neutron stars: Current Status

    CERN Document Server

    Mignani, R P

    2010-01-01

    Being fast rotating objects, Isolated Neutron Stars (INSs) are natural targets for high-time resolution observations across the whole electromagnetic spectrum. With the number of objects detected at optical (plus ultraviolet and infrared) wavelengths now increased to 24, high-time resolution observations of INSs at these wavelengths are becoming more and more important. While classical rotation-powered radio pulsars, like the Crab and Vela pulsars, have been the first INSs studied at high-time resolution in the optical domain, observations performed in the last two decades have unveiled potential targets in other types of INSs which are not rotation powered, although their periodic variability is still related to the neutron star rotation. In this paper I review the current status of high-time resolution observations of INSs in the optical domain for different classes of objects: rotation-powered pulsars, magnetars, thermally emitting neutron stars, and rapid radio transients, I describe their timing properti...

  16. Numerical Study on the Bifurcation of the North Equatorial Current

    Institute of Scientific and Technical Information of China (English)

    LIU Yulong; WANG Qi; SONG Jun; ZHU Xiande; GONG Xiaoqing; WU Fang

    2011-01-01

    A 1.5-layer reduced-gravity model forced by wind stress is used to study the bifurcations of the North Equatorial Current (NEC).The authors found that after removing the Ekman drift,the modelled circulations can serve well as a proxy of the SODA circulations on the σθ=25.0kgm-3 potential density surface based on available long-term reanalysis wind stress data.The modelled results show that the location of the western boundary bifurcation of the NEC depends on both zonal averaged and local zero wind stress curl latitude.The effects of the anomalous wind stress curl added in different areas are also investigated and it is found that they can change the strength of the Mindanao Eddy (ME),and then influence the interior pathway.

  17. Case Study of Capacity Building for Smoke-Free Indoor Air in Two Rural Wisconsin Communities

    Directory of Open Access Journals (Sweden)

    Shelly Mahon, MS

    2007-10-01

    Full Text Available BackgroundDespite national declines in smoking prevalence, disparities that pose challenges to tobacco control efforts exist among rural manufacturing populations. This community case study sought to better understand the dynamics and nuances that facilitate or impede capacity-building efforts in rural communities.ContextTwo rural manufacturing communities in Wisconsin with similar demographic characteristics were chosen for study. One represented farming communities with close proximity to a metropolitan area, and the other represented more isolated communities.MethodsThe qualitative case study used a collaborative approach to collect data in four areas of research: 1 community context, 2 coalition functioning, 3 partnerships, and 4 strategy implementation. Data were analyzed using standard content analysis and triangulated for clarity and consistency.ConsequencesAlthough not all the factors found to influence capacity-building efforts were unique to rural environments, the effects were impacted by rural isolation, small population sizes, local attitudes and beliefs, and lack of diversity and resources. Differences in coalition leadership and strategy implementation influenced the effectiveness of the capacity-building efforts in each community, bringing attention to the unique nature of individual contexts.InterpretationImplementing capacity-building efforts in rural communities requires skilled and dedicated local leaders who have ready access to training and support (i.e., technical, emotional, and financial. Pairing of rural communities with greater use of distance technologies offers a cost-effective approach to reduce isolation and the constraints of financial and human resources.

  18. Building Ecoliteracy Through Adiwiyata Program (Study at Adiwiyata School in Banda Aceh

    Directory of Open Access Journals (Sweden)

    Mirza Desfandi

    2017-07-01

    Full Text Available This study is back grounded by importance of ecoliteracy for each individual. One of comprehensive efforts to build ecoliteracy in community is through Adiwiyata Program. This study is aimed to find out how the effectiveness of Adiwiyata Program in the effort to build students’ ecoliteracy in Banda Aceh. The method which is used is survey. The study is conducted in ten schools, with respondents are principal, teachers, administrative staff and students. Data analysis is done descriptively toward five variable and hypothesis test use nonparametric statistic test. The result of study showed that there is significant influence of school policy, curriculum implementation, school culture and school infrastructure management toward students’ ecoliteracy. The findings of study is the more effective four components of Adiwiyata is implemented, the higher of students’ecoliteracy. Therefore, four components of Adiwiyata should be implemented maximally, among other by strengthening Adiwiyata school team.

  19. Experimental Study on Current-Driven Domain Wall Motion

    Science.gov (United States)

    Ono, T.; Yamaguchi, A.; Tanigawa, H.; Yano, K.; Kasai, S.

    2006-06-01

    Current-driven domain wall (DW) motion for a well-defined single DW in a micro-fabricated magnetic wire with submicron width was investigated by real-space observation with magnetic force microscopy. Magnetic force microscopy visualizes that a single DW introduced in a wire is displaced back and forth by positive and negative pulsed-current, respectively. Effect of the Joule heating, reduction of the threshold current density by shape control, and magnetic ratchet effect are also presented.

  20. Building America Case Study: Design Guidance for Passive Vents in New Construction Multifamily Buildings, New York, New York

    Energy Technology Data Exchange (ETDEWEB)

    2016-02-01

    This document addresses the use of passive vents as a source of outdoor air in multifamily buildings. The challenges associated with implementing passive vents and the factors affecting performance are outlined. A comprehensive design methodology and quantified performance metrics are provided. Two hypothetical design examples are provided to illustrate the process. This document is intended to be useful to designers, decision-makers, and contractors implementing passive ventilation strategies. It is also intended to be a resource for those responsible for setting high-performance building program requirements, especially pertaining to ventilation and outdoor air. To ensure good indoor air quality, a dedicated source of outdoor air is an integral part of high-performance buildings. Presently, there is a lack of guidance pertaining to the design and installation of passive vents, resulting in poor system performance. This report details the criteria necessary for designing, constructing, and testing passive vent systems to enable them to provide consistent and reliable levels of ventilation air from outdoors.

  1. Study of toroidal current penetration during current ramp in JIPP T-IIU with fast response Zeeman polarimeter

    Energy Technology Data Exchange (ETDEWEB)

    Kuramoto, H.; Hiraki, N. [Kyushu Inst. of Tech., Kitakyushu, Fukuoka (Japan); Toi, K. [and others

    1997-01-01

    The toroidal current penetration is studied in current ramp experiments of the JIPP T-IIU tokamak. The poloidal magnetic field profile in the peripheral region of a plasma (0.5 {<=} {rho} {<=} 1.0) has been measured directly with a newly developed fast response Zeeman polarimeter. The experimental results indicate that an obvious skin effect of toroidal current density is clearly observed during both the current ramp-up and ramp-down experiments. The experimentally obtained toroidal current density profiles are well described by the profiles calculated on the assumption of the neoclassical electrical conductivity. Quasi-linear {Delta}`-analysis of tearing modes for the measured current density profile is consistent with time behaviour of coherent MHD modes such as m=4/n=1 or m=3/n=1 (m: poloidal mode number, n: toroidal mode number) often observed during the current ramp-up phase. The effect of these MHD modes on current penetration during the current ramp-up discharges is studied. (author)

  2. Current state of the hydrothermal geochemistry studies at Cerro Prieto

    Energy Technology Data Exchange (ETDEWEB)

    Fausto L, J.J.; Jimenez S, M.E.; Esquer P, I.

    1981-01-01

    The current state of hydrothermal geochemistry studies being carried out at the field are reported. These studies are based on the results of chemical analysis of water samples collected during 1979 and 1980 at the geothermal wells of the area known as Cerro Prieto I, as well as from those located in the Cerro Prieto II and Cerro Prieto III areas, some of which have only recently started flowing. Data are presented on the chemical variations of the main chemical constituents dissolved in the waters, as well as on the Na/K and Na-K-Ca chemical relations and the temperatures calculated from them and from SiO/sub 2/. Fluid recharge into the reservoir and its direction of flow are interpreted from isotherm contour maps of the field prepared from Na/K and Na-K-Ca geothermometry and from concentration contour maps of some of the main chemical constituents. Well M-43 is discussed as an example of a well affected by well completion problems in its production casing. Its behavior is explained on the basis of the chemical characteristics of the produced water. The chemical changes that have taken place in some of the wells during production are explained by correlating the chemistry with the production mechanisms of the well (steam-water production rates).

  3. Current Advances in the Metabolomics Study on Lotus Seeds.

    Science.gov (United States)

    Zhu, Mingzhi; Liu, Ting; Guo, Mingquan

    2016-01-01

    Lotus (Nelumbo nucifera), which is distributed widely throughout Asia, Australia and North America, is an aquatic perennial that has been cultivated for over 2,000 years. It is very stimulating that almost all parts of lotus have been consumed as vegetable as well as food, especially the seeds. Except for the nutritive values of lotus, there has been increasing interest in its potential as functional food due to its rich secondary metabolites, such as flavonoids and alkaloids. Not only have these metabolites greatly contributed to the biological process of lotus seeds, but also have been reported to possess multiple health-promoting effects, including antioxidant, anti-amnesic, anti-inflammatory, and anti-tumor activities. Thus, comprehensive metabolomic profiling of these metabolites is of key importance to help understand their biological activities, and other chemical biology features. In this context, this review will provide an update on the current technological platforms, and workflow associated with metabolomic studies on lotus seeds, as well as insights into the application of metabolomics for the improvement of food safety and quality, assisting breeding, and promotion of the study of metabolism and pharmacokinetics of lotus seeds; meanwhile it will also help explore new perspectives and outline future challenges in this fast-growing research subject.

  4. Solar cycle in current reanalyses: (nonlinear attribution study

    Directory of Open Access Journals (Sweden)

    A. Kuchar

    2014-12-01

    Full Text Available This study focusses on the variability of temperature, ozone and circulation characteristics in the stratosphere and lower mesosphere with regard to the influence of the 11 year solar cycle. It is based on attribution analysis using multiple nonlinear techniques (Support Vector Regression, Neural Networks besides the traditional linear approach. The analysis was applied to several current reanalysis datasets for the 1979–2013 period, including MERRA, ERA-Interim and JRA-55, with the aim to compare how this type of data resolves especially the double-peaked solar response in temperature and ozone variables and the consequent changes induced by these anomalies. Equatorial temperature signals in the lower and upper stratosphere were found to be sufficiently robust and in qualitative agreement with previous observational studies. The analysis also pointed to the solar signal in the ozone datasets (i.e. MERRA and ERA-Interim not being consistent with the observed double-peaked ozone anomaly extracted from satellite measurements. Consequently the results obtained by linear regression were confirmed by the nonlinear approach through all datasets, suggesting that linear regression is a relevant tool to sufficiently resolve the solar signal in the middle atmosphere. Furthermore, the seasonal dependence of the solar response was also discussed, mainly as a source of dynamical causalities in the wave propagation characteristics in the zonal wind and the induced meridional circulation in the winter hemispheres. The hypothetical mechanism of a weaker Brewer Dobson circulation was reviewed together with discussion of polar vortex stability.

  5. Solar cycle in current reanalyses: (non)linear attribution study

    Science.gov (United States)

    Kuchar, A.; Sacha, P.; Miksovsky, J.; Pisoft, P.

    2014-12-01

    This study focusses on the variability of temperature, ozone and circulation characteristics in the stratosphere and lower mesosphere with regard to the influence of the 11 year solar cycle. It is based on attribution analysis using multiple nonlinear techniques (Support Vector Regression, Neural Networks) besides the traditional linear approach. The analysis was applied to several current reanalysis datasets for the 1979-2013 period, including MERRA, ERA-Interim and JRA-55, with the aim to compare how this type of data resolves especially the double-peaked solar response in temperature and ozone variables and the consequent changes induced by these anomalies. Equatorial temperature signals in the lower and upper stratosphere were found to be sufficiently robust and in qualitative agreement with previous observational studies. The analysis also pointed to the solar signal in the ozone datasets (i.e. MERRA and ERA-Interim) not being consistent with the observed double-peaked ozone anomaly extracted from satellite measurements. Consequently the results obtained by linear regression were confirmed by the nonlinear approach through all datasets, suggesting that linear regression is a relevant tool to sufficiently resolve the solar signal in the middle atmosphere. Furthermore, the seasonal dependence of the solar response was also discussed, mainly as a source of dynamical causalities in the wave propagation characteristics in the zonal wind and the induced meridional circulation in the winter hemispheres. The hypothetical mechanism of a weaker Brewer Dobson circulation was reviewed together with discussion of polar vortex stability.

  6. An ergonomic study in building demolition: Assessment of musculoskeletal disorders risk factors by PATH method

    Directory of Open Access Journals (Sweden)

    Mohammad Hajaghazadeh

    2012-01-01

    Full Text Available Aims: The aim of this study was the investigation of musculoskeletal disorders risk factors among building demolition workers. Materials and Methods: Posture, activity, tools, and handling (PATH method as a work sampling method was applied to record the postures, activities, and handling of building demolition workers in four tasks. The percentage of working time is reported for each item to compare the risk factors in tasks. Nordic musculoskeletal questionnaire also was used to study the prevalence of musculoskeletal disorders over 12 months. Results: Trunk, leg(s, and arm(s postures differed significantly among tasks. Neutral arm posture and non-neutral leg(s and trunk postures were observed frequently. Manual materials handling (MMH activities are distributed differently among tasks. Moving was the most observed (35% and carrying was the less observed (11.8% MMH activity. Gross grasp was the most observed (78.5% hand activity in building demolition workers. The most observed weight category was 0 kg≤load<5 kg. Low back had the highest prevalence of MSDs symptoms (91.1% and hip had the lowest prevalence of symptoms (6.7%. Conclusions: PATH is applicable to building demolition process. Ergonomic intervention is necessary in high prevalence body regions such as lower back and wrist to decrease the symptoms. With respect to the results of PATH method, ergonomic interventions for trunk and leg(s are necessary in all tasks, but only task #3 is in the priority of arm(s intervention.

  7. A PILOT STUDY OF THE ACCURACY OF CO2 SENSORS IN COMMERCIAL BUILDINGS

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William; Fisk, William J.; Faulkner, David; Sullivan, Douglas P.

    2007-09-01

    Carbon dioxide (CO2) sensors are often deployed in commercial buildings to obtain CO2 data that are used to automatically modulate rates of outdoor air supply. The goal is to keep ventilation rates at or above design requirements and to save energy by avoiding ventilation rates exceeding design requirements. However, there have been many anecdotal reports of poor CO2 sensor performance in actual commercial building applications. This study evaluated the accuracy of 44 CO2 sensors located in nine commercial buildings to determine if CO2 sensor performance, in practice, is generally acceptable or problematic. CO2 measurement errors varied widely and were sometimes hundreds of parts per million. Despite its small size, this study provides a strong indication that the accuracy of CO2 sensors, as they are applied and maintained in commercial buildings, is frequently less than needed to measure typical values of maximum one-hour-average indoor-outdoor CO2 concentration differences with less than a 20percent error. Thus, we conclude that there is a need for more accurate CO2 sensors and/or better sensor maintenance or calibration procedures.

  8. Analytical study of building height effects over Steel Plate Shear Wall Behavior

    Directory of Open Access Journals (Sweden)

    Benyamin Kioumarsi

    2016-09-01

    Full Text Available In the latest three decades, the steel plate shear walls (SPSW system has emerged as a promising lateral load resisting system for both construction new buildings and retrofit of existing buildings. This system has acceptable stiffness for control of structure displacement, ductile failure mechanism and high energy absorption. This paper will quantify the effect of increasing the height over analytical behavior of SPSW (height effect. Considering abundant emergence of high-rise buildings all over the world in recent years and their need for strengthening, the importance of the studies presented in this paper cannot be overemphasized for optimum height usage of SPSW lateral resisting system. The study was performed through design of four models of dual system with special moment frames capable of resisting at least 25% of prescribed seismic forces. In this article, structure buildings consisting of 5, 10, 15 and 20 stories have been modelled. Results consisting of story shear absorption, support reaction forces, lateral story displacement and drift index have investigated for different cases. Results show that SPSW absorbs more shears at the lower stories than top stories. Furthermore, axial reaction of edge supports experience decreasing rate corresponding to increase in the story numbers. Drift magnitude of steel plate shear wall with the 5 stories has the maximum value at the top story while the systems with the 10 and the 15 stories have maximum drift at lower stories.

  9. Radar Interferometry for Monitoring the Vibration Characteristics of Buildings and Civil Structures: Recent Case Studies in Spain

    Science.gov (United States)

    Luzi, Guido; Crosetto, Michele; Fernández, Enric

    2017-01-01

    The potential of a coherent microwave sensor to monitor the vibration characteristics of civil structures has been investigated in the past decade, and successful case studies have been published by different research teams. This remote sensing technique is based on the interferometric processing of real aperture radar acquisitions. Its capability to estimate, simultaneously and remotely, the displacement of different parts of the investigated structures, with high accuracy and repeatability, is its main advantage with respect to conventional sensors. A considerable amount of literature on this technique is available, including various case studies aimed at testing the ambient vibration of bridges, buildings, and towers. In the last years, this technique has been used in Spain for civil structures monitoring. In this paper, three examples of such case studies are described: the monitoring of the suspended bridge crossing the Ebro River at Amposta, the communications tower of Collserola in Barcelona, and an urban building located in Vilafranca del Penedès, a small town close to Barcelona. This paper summarizes the main outcomes of these case studies, underlining the advantages and limitations of the sensors currently available, and concluding with the possible improvements expected from the next generation of sensors. PMID:28338604

  10. Particle Image Velocimetry Study of Density Current Fronts

    Science.gov (United States)

    Martin, Juan Ezequiel

    2009-01-01

    Gravity currents are flows that occur when a horizontal density difference causes fluid to move under the action of gravity; density currents are a particular case, for which the scalar causing the density difference is conserved. Flows with a strong effect of the horizontal density difference, even if only partially driven by it--such as the…

  11. Optimal Decision Model for Sustainable Hospital Building Renovation—A Case Study of a Vacant School Building Converting into a Community Public Hospital

    Science.gov (United States)

    Juan, Yi-Kai; Cheng, Yu-Ching; Perng, Yeng-Horng; Castro-Lacouture, Daniel

    2016-01-01

    Much attention has been paid to hospitals environments since modern pandemics have emerged. The building sector is considered to be the largest world energy consumer, so many global organizations are attempting to create a sustainable environment in building construction by reducing energy consumption. Therefore, maintaining high standards of hygiene while reducing energy consumption has become a major task for hospitals. This study develops a decision model based on genetic algorithms and A* graph search algorithms to evaluate existing hospital environmental conditions and to recommend an optimal scheme of sustainable renovation strategies, considering trade-offs among minimal renovation cost, maximum quality improvement, and low environmental impact. Reusing vacant buildings is a global and sustainable trend. In Taiwan, for example, more and more school space will be unoccupied due to a rapidly declining birth rate. Integrating medical care with local community elder-care efforts becomes important because of the aging population. This research introduces a model that converts a simulated vacant school building into a community public hospital renovation project in order to validate the solutions made by hospital managers and suggested by the system. The result reveals that the system performs well and its solutions are more successful than the actions undertaken by decision-makers. This system can improve traditional hospital building condition assessment while making it more effective and efficient. PMID:27347986

  12. Optimal Decision Model for Sustainable Hospital Building Renovation-A Case Study of a Vacant School Building Converting into a Community Public Hospital.

    Science.gov (United States)

    Juan, Yi-Kai; Cheng, Yu-Ching; Perng, Yeng-Horng; Castro-Lacouture, Daniel

    2016-06-24

    Much attention has been paid to hospitals environments since modern pandemics have emerged. The building sector is considered to be the largest world energy consumer, so many global organizations are attempting to create a sustainable environment in building construction by reducing energy consumption. Therefore, maintaining high standards of hygiene while reducing energy consumption has become a major task for hospitals. This study develops a decision model based on genetic algorithms and A* graph search algorithms to evaluate existing hospital environmental conditions and to recommend an optimal scheme of sustainable renovation strategies, considering trade-offs among minimal renovation cost, maximum quality improvement, and low environmental impact. Reusing vacant buildings is a global and sustainable trend. In Taiwan, for example, more and more school space will be unoccupied due to a rapidly declining birth rate. Integrating medical care with local community elder-care efforts becomes important because of the aging population. This research introduces a model that converts a simulated vacant school building into a community public hospital renovation project in order to validate the solutions made by hospital managers and suggested by the system. The result reveals that the system performs well and its solutions are more successful than the actions undertaken by decision-makers. This system can improve traditional hospital building condition assessment while making it more effective and efficient.

  13. Study on electrical current variations in electromembrane extraction process: Relation between extraction recovery and magnitude of electrical current.

    Science.gov (United States)

    Rahmani, Turaj; Rahimi, Atyeh; Nojavan, Saeed

    2016-01-15

    This contribution presents an experimental approach to improve analytical performance of electromembrane extraction (EME) procedure, which is based on the scrutiny of current pattern under different extraction conditions such as using different organic solvents as supported liquid membrane, electrical potentials, pH values of donor and acceptor phases, variable extraction times, temperatures, stirring rates, different hollow fiber lengths and the addition of salts or organic solvents to the sample matrix. In this study, four basic drugs with different polarities were extracted under different conditions with the corresponding electrical current patterns compared against extraction recoveries. The extraction process was demonstrated in terms of EME-HPLC analyses of selected basic drugs. Comparing the obtained extraction recoveries with the electrical current patterns, most cases exhibited minimum recovery and repeatability at the highest investigated magnitude of electrical current. . It was further found that identical current patterns are associated with repeated extraction efficiencies. In other words, the pattern should be repeated for a successful extraction. The results showed completely different electrical currents under different extraction conditions, so that all variable parameters have contributions into the electrical current pattern. Finally, the current patterns of extractions from wastewater, plasma and urine samples were demonstrated. The results indicated an increase in the electrical current when extracting from complex matrices; this was seen to decrease the extraction efficiency.

  14. Thermally stimulated depolarization current studies of sulfonated polystyrene ionomers

    Science.gov (United States)

    Carvalho, Antonio José Felix; Viana, Vicente Galber Freitas; Faria, Roberto Mendonça

    2009-12-01

    A detailed study of thermally stimulated depolarization current (TSDC) was carried out to investigate dipolar relaxation and the charge storage phenomenon in films of sulfonated polystyrene (SPS) ionomers having lithium or potassium as counterions. Differential scanning calorimetry measurements were also applied as a complementary technique, mainly to follow the change of the glass transition temperature with the amount of sulfonated groups. It was observed that, since the glass transition does not change significantly with the amount of sulfonated groups, a cluster of multiplets is expected not to be formed in the range used in this work. TSDC of SPS samples polarized at temperatures higher than the glass transition temperature showed three peaks: one at lower temperature (peak β), an intermediate peak (peak α), and a third that appeared at a temperature coincident with the polarization temperature (peak ρ). Quantitative information about trapping-detrapping and dipolar relaxation and their corresponding activation energies was determined by fittings of the deconvoluted peaks with kinetic relaxation processes.

  15. Thermally stimulated depolarization current studies of sulfonated polystyrene ionomers

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Antonio Jose Felix [Universidade Federal de Sao Carlos, Laboratory of Polymers and Renewable Materials, Sorocaba, SP (Brazil); Viana, Vicente Galber Freitas [Universidade Federal do Piaui, Centro de Ciencias da Natureza, Teresina, PI (Brazil); Faria, Roberto Mendonca [USP, Instituto de Fisica de Sao Carlos, SP (Brazil)

    2009-12-15

    A detailed study of thermally stimulated depolarization current (TSDC) was carried out to investigate dipolar relaxation and the charge storage phenomenon in films of sulfonated polystyrene (SPS) ionomers having lithium or potassium as counterions. Differential scanning calorimetry measurements were also applied as a complementary technique, mainly to follow the change of the glass transition temperature with the amount of sulfonated groups. It was observed that, since the glass transition does not change significantly with the amount of sulfonated groups, a cluster of multiplets is expected not to be formed in the range used in this work. TSDC of SPS samples polarized at temperatures higher than the glass transition temperature showed three peaks: one at lower temperature (peak {beta}), an intermediate peak (peak {alpha}), and a third that appeared at a temperature coincident with the polarization temperature (peak {rho}). Quantitative information about trapping-detrapping and dipolar relaxation and their corresponding activation energies was determined by fittings of the deconvoluted peaks with kinetic relaxation processes. (orig.)

  16. Optimal environmental conditions to detect moisture in ancient buildings: case studies in Northern Italy

    Science.gov (United States)

    Rosina, Elisabetta; Ludwig, Nicola; Rosi, Lorenzo

    1998-03-01

    IR thermography allows to identify the thermal anomalies due to moisture in ancient walls. Wet zones can appear warmer or colder in IR images, according to the atmospheric conditions during the scanning; furthermore, thermal monitoring, even in qualitative thermography, allows to obtain a more effective diagnosis of the defects because it records thermal behaviors of the material in different environmental conditions. Thermographic system allows an accurate analysis of transpiration effects on buildings and precise measurements of water content starting from environmental temperature, relative balance and wind speed. These variables play a major role in the causes of damages in buildings. Particularly, the evaluation of transpiration is essential to determine the evaporative rate of water content within the wall. The research has been carried out on two ancient buildings during a period of several months. The main experimental tests were on the church of 'Guardia di Sotto', Corsico, a seventeenth century building on the bank of Pavese Canal. Five thermal scanning have been disposed in different seasons from March 14, 1996 to June 16, 1997. The causes of the wet zones were identified at the basis of the walls were rising damp and rain spread in the ground. The repeated thermographies and thermo-hygrometric test allowed to distinguish the size and the location of the areas damaged by the different causes. In other cases studied - Addolorate Church, Gessate the thermal scanning and the other supporting tests confirmed the list of optimal environmental condition required to detect humidity in walls by thermography.

  17. Study of Volatility of New Ship Building Prices in LNG Shipping

    Directory of Open Access Journals (Sweden)

    T. Bangar Raju

    2016-12-01

    Full Text Available The natural gas market has been expanding in size and has attracted particular attention across the global energy market. Although most natural gas transportation is carried out through pipelines, almost one third of it is done with the help of merchant vessels, capable of carrying liquefied natural gas. These LNG carriers have a special design and thus can be treated as a separate class of global fleet. New vessels are huge capital investments by vessel owning companies and just like other vessel classes; the new shipbuilding prices for the LNG segment continue to be a key aspect in the decision making of business players. Additionally these prices can be volatile as new ship building prices fluctuate with time. This paper attempts to analyse the volatility of new ship building prices of LNG carriers. For the study, the average ship building prices for all the LNG carriers having volume carrying capacity is between 160,000 – 173,000 cbm to be delivered between 2016 – 2019 were taken into account. For the analysis, GARCH and EGARCH methods were applied on the data set. The analysis concluded that there is a great deal of volatility in the new ship building prices of LNG vessels. It was also identified that negative shocks were more persistent the positive shocks.

  18. A dynamic experimental study on the evaporative cooling performance of porous building materials

    Science.gov (United States)

    Zhang, Yu; Zhang, Lei; Meng, Qinglin; Feng, Yanshan; Chen, Yuanrui

    2017-08-01

    Conventional outdoor dynamic and indoor steady-state experiments have certain limitations in regard to investigating the evaporative cooling performance of porous building materials. The present study investigated the evaporative cooling performance of a porous building material using a special wind tunnel apparatus. First, the composition and control principles of the wind tunnel environment control system were elucidated. Then, the meteorological environment on a typical summer day in Guangzhou was reproduced in the wind tunnel and the evaporation process and thermal parameters of specimens composed of a porous building material were continuously measured. Finally, the experimental results were analysed to evaluate the accuracy of the wind tunnel environment control system, the heat budget of the external surface of the specimens and the total thermal resistance of the specimens and its uncertainty. The analysis results indicated that the normalized root-mean-square error between the measured value of each environmental parameter in the wind tunnel test section and the corresponding value input into the environment control system was internal surface of the specimen. Compared to the dry specimen, the total thermal resistance of the wet specimen was approximately doubled, indicating that the evaporation process of the porous building material could significantly improve the thermal insulation performance of the specimen.

  19. Technology Solutions Case Study: Boiler Control Replacement for Hydronically Heated Multifamily Buildings, Cambridge, Massachusetts

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-11-01

    The ARIES Collaborative, a U.S. Department of Energy Building America research team, partnered with NeighborWorks America affiliate Homeowners' Rehab Inc. (HRI) of Cambridge, Massachusetts, to study improvements to the central hydronic heating system in one of the nonprofit's housing developments. The heating controls in the three-building, 42-unit Columbia Cambridge Alliance for Spanish Tenants housing development were upgraded. Fuel use in the development was excessive compared to similar properties. A poorly insulated thermal envelope contributed to high energy bills, but adding wall insulation was not cost-effective or practical. The more cost-effective option was improving heating system efficiency, which faced several obstacles, including inflexible boiler controls and failed thermostatic radiator valves. Boiler controls were replaced with systems that offer temperature setbacks and one that controls heat based on apartment temperature in addition to outdoor temperature. Utility bill analysis shows that post-retrofit weather-normalized heating energy use was reduced by 10%-31% (average of 19%). Indoor temperature cutoff reduced boiler runtime (and therefore heating fuel consumption) by 28% in the one building in which it was implemented. Nearly all savings were obtained during night which had a lower indoor temperature cut off (68°F) than day (73° F). This implies that the outdoor reset curve was appropriately adjusted for this building for daytime operation. Nighttime setback of heating system supply water temperature had no discernable impact on boiler runtime or gas bills.

  20. The healthy building intervention study: Objectives, methods and results of selected environmental measurements

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, W.J.; Faulkner, D.; Sullivan, D. [and others

    1998-02-17

    To test proposed methods for reducing SBS symptoms and to learn about the causes of these symptoms, a double-blind controlled intervention study was designed and implemented. This study utilized two different interventions designed to reduce occupants` exposures to airborne particles: (1) high efficiency filters in the building`s HVAC systems; and (2) thorough cleaning of carpeted floors and fabric-covered chairs with an unusually powerful vacuum cleaner. The study population was the workers on the second and fourth floors of a large office building with mechanical ventilation, air conditioning, and sealed windows. Interventions were implemented on one floor while the occupants on the other floor served as a control group. For the enhanced-filtration intervention, a multiple crossover design was used (a crossover is a repeat of the experiment with the former experimental group as the control group and vice versa). Demographic and health symptom data were collected via an initial questionnaire on the first study week and health symptom data were obtained each week, for eight additional weeks, via weekly questionnaires. A large number of indoor environmental parameters were measured during the study including air temperatures and humidities, carbon dioxide concentrations, particle concentrations, concentrations of several airborne bioaerosols, and concentrations of several microbiologic compounds within the dust sampled from floors and chairs. This report describes the study methods and summarizes the results of selected environmental measurements.

  1. MODEL STUDY OF THE DOUBLE FED MACHINE WITH CURRENT CONTROL

    Directory of Open Access Journals (Sweden)

    A. S. Lyapin

    2016-07-01

    Full Text Available The paper deals with modeling results of the double fed induction machine with current control in the rotor circuit. We show the most promising applications of electric drives on the basis of the double fed induction machine and their advantages. We present and consider functional scheme of the electric drive on the basis of the double fed induction machine with current control. Equations are obtained for creation of such machine mathematical model. Expressions for vector projections of rotor current are given. According to the obtained results, the change of the vector projections of rotor current ensures operation of the double fed induction machine with the specified values of active and reactive stator power throughout the variation range of sliding motion. We consider static characteristics of double fed machine with current control. Energy processes proceeding in the machine are analyzed. We confirm the operationpossibility of double fed induction machine with current controlin the rotor circuit with given values of active and reactive stator power. The presented results can be used for creation of mathematical models and static characteristics of double fed machines with current control of various capacities.

  2. Contaminants in Buildings and Occupied Spaces as Risk Factors forOccupant Symptoms in U.S. Office Buildings: Findings from the U.S. EPABASE Study

    Energy Technology Data Exchange (ETDEWEB)

    Mendell, M.J.; Mirer, A.; Lei-Gomez, Q.

    2007-08-01

    Nonspecific building-related symptoms among occupants of modern office buildings worldwide are common and may be associated with important reductions in work performance, but their etiology remains uncertain. Most reported research into environmental risk factors for these symptoms has focused on ventilation system-related factors, dampness, and particle removal through filtration and cleaning, with relatively few studies of other potential sources of indoor contaminants. We analyzed data collected by the U.S. Environmental Protection Agency (EPA) from a representative sample of 100 large U.S. office buildings--the Building Assessment and Survey Evaluation (BASE) study--using multivariate-adjusted logistic regression models with generalized estimating equations. We estimated odds ratios (ORs) and 95% confidence intervals (CIs) for associations between seven building-related symptom outcomes and a diverse set of potential indoor and outdoor sources for indoor pollutants. Although most of the investigated risk factors showed no apparent association with building-related symptoms, some interesting associations resulted. Increased prevalence of symptoms was associated with carpets older than one year (lower respiratory symptoms), non-carpeted floors (upper and lower respiratory symptoms), older furniture (eye and skin symptoms), infrequent vacuuming (upper respiratory, eye, and skin symptoms and headache), and masonry exterior walls (cough, eye symptoms, and fatigue/concentration difficulty). For the many potential risk factors assessed, almost none had been investigated previously, and many associations found here may have been by chance. Additional confirmatory research focused on risk factors initially identified here is needed, using more objective measures of health outcomes and risk factors or exposures.

  3. Study of wavelet transform type high-current transformer

    Institute of Scientific and Technical Information of China (English)

    卢文科; 朱长纯; 刘君华; 张建军

    2002-01-01

    The wavelet transformation is applied to the high-current transformer.The high-current transformer elaborated in the paper is mainly applied to the measurement of AC/DC high-current.The principle of the transformer is the Hall direct-measurement principle.The transformer has the following three characteristics:firstly, the effect of the remnant field of the iron core on the measurement is decreased;secondly,because the temperature compensation is adopted,the transformer has good temperature charactreristic;thirdly,be-cause the wavelet transfomation technology is adopted,the transformer has the capacity of good antijanming.

  4. Building America Case Study: Evaluation of Passive Vents in New-Construction Multifamily Buildings, New York, New York

    Energy Technology Data Exchange (ETDEWEB)

    2015-10-15

    Exhaust ventilation and corresponding outdoor air strategies are being implemented in high-performance new construction multifamily buildings to meet program or code requirements for improved indoor air quality, but a lack of clear design guidance is resulting in poor performance of these systems despite the best intentions of the programs or standards. CARB's 2014 'Evaluation of Ventilation Strategies in New Construction Multifamily Buildings' consistently demonstrated that commonly used outdoor air strategies are not performing as expected. Of the four strategies evaluated in 2014, the exhaust ventilation system that relied on outdoor air from a pressurized corridor was ruled out as a potential best practice due to its conflict with meeting requirements within most fire codes. Outdoor air that is ducted directly to the apartments was a strategy determined to have the highest likelihood of success, but with higher first costs and operating costs. Outdoor air through space conditioning systems was also determined to have good performance potential, with proper design and execution. The fourth strategy, passive systems, was identified as the least expensive option for providing outdoor air directly to apartments, with respect to both first costs and operating costs. However, little is known about how they actually perform in real-world conditions or how to implement them effectively. Based on the lack of data available on the performance of these low-cost systems and their frequent use in the high-performance building programs that require a provision for outdoor air, this research project sought to further evaluate the performance of passive vents.

  5. Building America Case Study: Zero Energy Ready Home Multifamily Project: Mutual Housing at Spring Lake, Woodland, California

    Energy Technology Data Exchange (ETDEWEB)

    2015-09-01

    Building cost effective, high performance homes that provide superior comfort, health, and durability is the goal of the Department of Energy's (DOE's) Zero Energy Ready Homes (ZERH) program. Through Building America research and other innovative programs throughout the country, many of the technical challenges to building to the ZERH standard have been addressed. This case study describes the development of a 62-unit multifamily community constructed by nonprofit developer Mutual Housing at the Spring Lake subdivision in Woodland, CA. The Spring Lake project is expected to be the first ZERH-certified multifamily project nationwide. Building America team Alliance for Residential Building Innovation worked with Mutual Housing throughout the project. The case study discusses challenges encountered, lessons learned, and how obstacles were overcome. An objective of this project was to gain a highly visible foothold for residential buildings built to the DOE ZERH specification that can be used to encourage participation by other California builders.

  6. Cost-of-illness studies : a review of current methods.

    Science.gov (United States)

    Akobundu, Ebere; Ju, Jing; Blatt, Lisa; Mullins, C Daniel

    2006-01-01

    The number of cost-of-illness (COI) studies has expanded considerably over time. One outcome of this growth is that the reported COI estimates are inconsistent across studies, thereby raising concerns over the validity of the estimates and methods. Several factors have been identified in the literature as reasons for the observed variation in COI estimates. To date, the variation in the methods used to calculate costs has not been examined in great detail even though the variations in methods are a major driver of variation in COI estimates. The objective of this review was to document the variation in the methodologies employed in COI studies and to highlight the benefits and limitations of these methods. The review of COI studies was implemented following a four-step procedure: (i) a structured literature search of MEDLINE, JSTOR and EconLit; (ii) a review of abstracts using pre-defined inclusion and exclusion criteria; (iii) a full-text review using pre-defined inclusion and exclusion criteria; and (iv) classification of articles according to the methods used to calculate costs. This review identified four COI estimation methods (Sum_All Medical, Sum_Diagnosis Specific, Matched Control and Regression) that were used in categorising articles. Also, six components of direct medical costs and five components of indirect/non-medical costs were identified and used in categorising articles.365 full-length articles were reflected in the current review following the structured literature search. The top five cost components were emergency room/inpatient hospital costs, outpatient physician costs, drug costs, productivity losses and laboratory costs. The dominant method, Sum_Diagnosis Specific, was a total costing approach that restricted the summation of medical expenditures to those related to a diagnosis of the disease of interest. There was considerable variation in the methods used within disease subcategories. In several disease subcategories (e.g. asthma, dementia

  7. Study on UPF Harmonic Current Detection Method Based on DSP

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, H J [Northwestern Polytechnical University, Xi' an 710072 (China); Pang, Y F [Xi' an University of Technology, Xi' an 710048 (China); Qiu, Z M [Xi' an University of Technology, Xi' an 710048 (China); Chen, M [Northwestern Polytechnical University, Xi' an 710072 (China)

    2006-10-15

    Unity power factor (UPF) harmonic current detection method applied to active power filter (APF) is presented in this paper. The intention of this method is to make nonlinear loads and active power filter in parallel to be an equivalent resistance. So after compensation, source current is sinusoidal, and has the same shape of source voltage. Meanwhile, there is no harmonic in source current, and the power factor becomes one. The mathematic model of proposed method and the optimum project for equivalent low pass filter in measurement are presented. Finally, the proposed detection method applied to a shunt active power filter experimental prototype based on DSP TMS320F2812 is developed. Simulation and experiment results indicate the method is simple and easy to implement, and can obtain the real-time calculation of harmonic current exactly.

  8. Durability Study of SOFCs Under Cycling Current Load Conditions

    DEFF Research Database (Denmark)

    Hagen, Anke; Hendriksen, Peter Vang; Frandsen, Henrik Lund;

    2009-01-01

    In fuel cell applications, the cells must be able to withstand varying operating conditions. Anode supported solid oxide fuel cells were tested under cycling current load in order to determine the durability and possibly identify degradation mechanisms. At 750 °C and a cycling between zero and 0.......75 A cm-2, the cell voltage degradation rate was similar to tests with the corresponding high constant current density. However, by analyzing the impedance spectra it was found that anode degradation was becoming more important when going from constant to cycling conditions. Running the cycling load tests...... at 850 °C, the cells degraded similarly as under the corresponding constant current load whereas, in some cases, cells failed mechanically after a few hundred hours. These cells did not experience severe additional degradation due to the cycling of the current density until the point of failure...

  9. Energy-efficient building design in cold climates: Schools as a case study

    Science.gov (United States)

    Rangel Ruiz, Rocio

    Buildings account for great amounts of greenhouse gas emissions. In terms of energy, buildings account for one third of the total amount of energy used in the country every year! Schools account for 14 percent of the energy used annually in commercial and institutional buildings. Further, schools are one of the most commonly constructed building types in Canada and spaces such as classrooms are often duplicated. This makes them preferred candidates for the research that was undertaken where energy-efficient solutions that can be transferred to different school designs were derived. Throughout the study, the Commercial Building Incentive Program (CBIP) was used as a benchmark. The objectives of the study were to demonstrate energy-efficient concepts, provide a case study to evaluate solutions, develop typological models and provide an understanding of the innovation process. The technological and societal aspects of the energy-efficient design were addressed. With respect to the technological aspects, the first step was the analysis of conventional design using a school in Calgary as a case study. The optimization of conventional design was undertaken using computer modeling to identify best practice solutions. Aspects that were included in the studies were lighting design, envelope characteristics, HVAC systems and building plant systems. The inclusion of passive design included the analysis of daylighting and natural ventilation. Computer modeling was used to assess daylighting in classrooms with unilateral and bilateral daylighting. Illuminance levels, glare and light distribution were evaluated. The study of natural ventilation was undertaken using literature review. Airflow and outdoor temperatures were the focus to identify solutions that could be incorporated into the design of classrooms. It was concluded that achieving excellence in energy efficiency in schools could be achieved using readily available technologies. Energy savings of up to 63 percent better

  10. Strategies for Promoting Green Building Technologies Adoption in the Construction Industry-An International Study

    National Research Council Canada - National Science Library

    Albert Ping Chuen Chan; Amos Darko; Ernest Effah Ameyaw

    2017-01-01

    Because green building technologies (GBTs) adoption is a promising way of ameliorating the sustainability performance of buildings, GBTs are receiving increased interest in the global construction community...

  11. A study on the usage and perceptions of office building occupants to green roofs in Hong Kong

    OpenAIRE

    2014-01-01

    As Hong Kong is famous for its image of leading international financial metropolis, many high-rise office buildings are confined inside some developed commercial districts of Hong Kong. A place for provision of greenery in such districts seems impracticable. However, greenery can exist in forms of green roof onto office buildings, it seems a practical way to embellish this concrete city. Academic studies from other countries have proven that having green roof onto buildings is able to bri...

  12. Study of lower hybrid current drive for the demonstration reactor

    Energy Technology Data Exchange (ETDEWEB)

    Molavi-Choobini, Ali Asghar [Dept. of Physics, Faculty of Engineering, Islamic Azad University, Shahr-e-kord Branch, Shahr-e-kord (Iran, Islamic Republic of); Naghidokht, Ahmed [Dept. of Physics, Urmia University, Urmia (Iran, Islamic Republic of); Karami, Zahra [Dept. of Engineering, Islamic Azad University, Zanjan Branch, Zanjan (Iran, Islamic Republic of)

    2016-06-15

    Steady-state operation of a fusion power plant requires external current drive to minimize the power requirements, and a high fraction of bootstrap current is required. One of the external sources for current drive is lower hybrid current drive, which has been widely applied in many tokamaks. Here, using lower hybrid simulation code, we calculate electron distribution function, electron currents and phase velocity changes for two options of demonstration reactor at the launched lower hybrid wave frequency 5 GHz. Two plasma scenarios pertaining to two different demonstration reactor options, known as pulsed (Option 1) and steady-state (Option 2) models, have been analyzed. We perceive that electron currents have major peaks near the edge of plasma for both options but with higher efficiency for Option 1, although we have access to wider, more peripheral regions for Option 2. Regarding the electron distribution function, major perturbations are at positive velocities for both options for flux surface 16 and at negative velocities for both options for flux surface 64.

  13. Building Capacity to Use Earth Observations in Decision Making: A Case Study of NASA's DEVELOP National Program Methods and Best Practices

    Science.gov (United States)

    Childs-Gleason, L. M.; Ross, K. W.; Crepps, G.; Miller, T. N.; Favors, J. E.; Rogers, L.; Allsbrook, K. N.; Bender, M. R.; Ruiz, M. L.

    2015-12-01

    NASA's DEVELOP National Program fosters an immersive research environment for dual capacity building. Through rapid feasibility Earth science projects, the future workforce and current decision makers are engaged in research projects to build skills and capabilities to use Earth observation in environmental management and policy making. DEVELOP conducts over 80 projects annually, successfully building skills through partnerships with over 150 organizations and providing over 350 opportunities for project participants each year. Filling a void between short-term training courses and long-term research projects, the DEVELOP model has been successful in supporting state, local, federal and international government organizations to adopt methodologies and enhance decision making processes. This presentation will highlight programmatic best practices, feedback from participants and partner organizations, and three sample case studies of successful adoption of methods in the decision making process.

  14. Energy Retrofit Strategies for Residential Building Envelopes: An Italian Case Study of an Early-50s Building

    Directory of Open Access Journals (Sweden)

    Luca Evangelisti

    2015-08-01

    Full Text Available During the last few years, the issues of energy efficiency and energy saving have dominated the buildings research field. New constructions are based on efficient design and, because of this, the real challenge is to retrofit existing buildings. Italian standards impose thermal transmittance limits for opaque and transparent surfaces, according to the climatic area. In order to understand buildings’ energy behavior, an accurate analysis, carried out by employing advanced calculation codes and instrumental diagnosis—provided by the use of heat flow meter, surface temperature probes and thermal imaging camera—is needed. In this paper, a structure built in the 50 s has been analyzed, by means of a measurement campaign, to investigate the building’s characteristics and its vulnerability. Finally, some retrofit hypotheses have been evaluated by means of a well-known dynamic code. All investments have to be analyzed under a financial point of view, considering materials and installation costs. For this reason, the payback time has been calculated in order to understand how quickly the energy upgrading can be repaid.

  15. Renovation of NZCB in a poor solar irradiation zone: An investigative case study of residential buildings in Chongqing urban areas

    Directory of Open Access Journals (Sweden)

    Md Sahadat Hossain, Baizhan Li

    2016-01-01

    Full Text Available The energy requirements of Chongqing, a major economic hub of Southwest China, have increased annually with at an average of 10.49% per annum since 1997. The predominant primary source of energy is coal. China’s long range goal is for a green economy and solar energy is considered a prime renewable energy source. This investigation assessed the feasibility of solar energy utilization in existing residential buildings in Chongqing Urban Areas. The main objectives of the research were to see “available solar renewable energy resource for utilization” and “how much CO2 emission could be abated by using solar energy from these residential buildings”. On the basis of average 3.47 kWhm-2d-1 and per capita 20.46m2 residential areas in 2012, the feasibility study found the availability of 1250 kWhm-²d-1 irradiation. In addition, 15% yielding from this availability had the potential of 2.88 MWh annual clean energy generations abating 89.6% of CO2 emissions from current electricity consumption. The investigative case study in three residential buildings of the Shapingba district of Chongqing found the 0.089, 0.086 and 0.126 tce of CO2 emissions for per capita 187.89 kWh, 182.23 kWh and 265.37 kWh monthly energy demand. Although the long cash pay back periods (46, 43 and 31 years don’t suggest immediate strong PV utilization in this area this form of renewable energy in Chongqing could form a distinctive substitute as a flanking measure for zero carbon residential buildings.

  16. Experimental Study on Tsunami Risk Reduction on Coastal Building Fronted by Sea Wall

    OpenAIRE

    Rahman, Sadia; Akib, Shatirah; M.T.R. Khan; Shirazi, S.M.

    2014-01-01

    This experimental study was conducted to idealize the efficacy of sea wall in controlling the tsunami forces on onshore structures. Different types of sea walls were placed in front of the building model. The tsunami forces and the wave heights were measured with and without the sea wall conditions. Types of sea wall, wall height, and wall positions were varied simultaneously to quantify the force reductions. Maximum of 41% forces was reduced by higher sea wall, positioned closer proximity to...

  17. Capacity Building Through Integration and Transformational Leadership – A Case Study

    Directory of Open Access Journals (Sweden)

    Sacha Stöcklin

    2011-04-01

    Full Text Available This article suggests that educational managers can have an influence through leadership by establishing certain moderators that integrate and shape the faculty into a solid team working towards a high performing organisation. The study looks at a case in China and draws suggestions that could be used in other similar settings. The conclusion is to make integration a crucial part of capacity building.

  18. Evaluation of Building Performance in Use - A Case Study of the Seager Distillery Development

    OpenAIRE

    Lim, Michael CN; Ross, David; Harper, Steve

    2015-01-01

    A two-year post-occupancy performance evaluation has been undertaken of the apartments within Galliard Homes’ Seager Distillery redevelopment site in London. The Seager Distillery site is typical of the many new high-density developments in London, reflecting the tightening standards on energy use and pressure on land use. This paper presents the energy and environmental performance of three apartments studied in detail, including the assessment of the performance of the building fabric, MVHR...

  19. Air Quality Study Using Satellites - Current Capability and Future Plans

    Science.gov (United States)

    Bhartia, Pawan K.; Joiner, Joanna; Gleason, James; Liu, Xiong; Torres, Omar; Krotkov, Nickolay; Ziemke, Jerry; Chandra, Sushil

    2008-01-01

    Satellite instruments have had great success in monitoring the stratospheric ozone and in understanding the processes that control its daily to decadal scale variations. This field is now reaching its zenith with a number of satellite instruments from the US, Europe and Canada capping several decades of active research in this field. The primary public policy imperative of this research was to make reliable prediction of increases in biologically active surface UV radiation due to human activity. By contrast retrieval from satellite data of atmospheric constituents and photo-chemically active radiation that affect air quality is a new and growing field that is presenting us with unique challenges in measurement and data interpretation. A key distinction compared to stratospheric sensors is the greatly enhanced role of clouds, aerosols, and surfaces (CAS) in determining the quality and quantity of useful data that is available for air quality research. In our presentation we will use data from several sensors that are currently flying on the A-train satellite constellation, including OMI, MODIS, CLOUDSAT, and CALIPSO, to highlight that CAS can have both positive and negative effects on the information content of satellite measurements. This is in sharp contrast to other fields of remote sensing where CAS are usually considered an interference except in those cases when they are the primary subject of study. Our analysis has revealed that in the reflected wavelengths one often sees much further down into the atmosphere, through most cirrus, than one does in the emitted wavelengths. The lower level clouds provide a nice background against which one can track long-range transport of trace gases and aerosols. In addition, differences in trace gas columns estimated over cloudy and adjacent clear pixels can be used to measure boundary layer trace gases. However, in order to take full advantage of these features it will be necessary to greatly advance our understanding of

  20. Raman scattering or fluorescence emission? Raman spectroscopy study on lime-based building and conservation materials.

    Science.gov (United States)

    Kaszowska, Zofia; Malek, Kamilla; Staniszewska-Slezak, Emilia; Niedzielska, Karina

    2016-12-05

    This work presents an in-depth study on Raman spectra excited with 1064 and 532nm lasers of lime binders employed in the past as building materials and revealed today as valuable conservation materials. We focus our interest on the bands of strong intensity, which are present in the spectra of all binders acquired with laser excitation at 1064nm, but absent in the corresponding spectra acquired with laser excitation at 532nm. We suggest, that the first group of spectra represents fluorescence phenomena of unknown origin and the second true Raman scattering. In our studies, we also include two other phases of lime cycle, i.e. calcium carbonate (a few samples of calcite of various origins) and calcium oxide (quicklime) to assess how structural and chemical transformations of lime phases affect the NIR-Raman spectral profile. Furthermore, we analyse a set of carbonated limewashes and lime binders derived from old plasters to give an insight into their spectral characteristics after excitation with the 1064nm laser line. NIR-Raman micro-mapping results are also presented to reveal the spatial distribution of building materials and fluorescent species in the cross-section of plaster samples taken from a 15th century chapel. Our study shows that the Raman analysis can help identify lime-based building and conservation materials, however, a caution is advised in the interpretation of the spectra acquired using 1064nm excitation.

  1. STUDY OF SHELL FOR ENERGY EFFICIENT OF SUSTAINABLE LOW-RISE BUILDING

    Directory of Open Access Journals (Sweden)

    DANISHEVSKYI V. V.

    2016-03-01

    Full Text Available The article presents the results of study the shell for energy-efficient environmental low-rise residential building, corresponding to the criteria of sustainable development in construction. Purpose. The purpose of the presented research is providing a study of parameters for shell of energy-efficient environmental low-rise buildings. Methodology. Research is carried out on the basis of an improved method for calculating the thermal characteristics of the external walling, as well as physical heat transfer simulation. Conclusion.The ratio between the thickness of external walling and the proportion of heat loss through them was determined, and also the heat loss through thermal "bridges" was studied. Originality. The limits for the optimum thickness of the external walling of ecological materials was analyzed, and it was offered solution for minimization of heat loss through the nodes of shell. Practical value.Recommendations are worked out on constructing of thermal shell at planning of energy-efficient low-rise residential buildings.

  2. Integrating Responsive Building Elements in Buildings

    DEFF Research Database (Denmark)

    Haase, Matthias; Amato, Alex; Heiselberg, Per

    2006-01-01

    There is a global need for a more sustainable building development. About 50% of energy is used in buildings indicating that buildings provide a considerable potential for operational energy savings. Studies were conducted with the following objectives: to perform a state-of-the-art review...... energy strategies to develop guidelines and procedures for estimation of environmental performance of responsive building elements and integrated building concepts This paper introduces the ideas of this collaborative work and discusses its usefulness for Hong Kong and China. Special focus was put...... of responsive building elements, of integrated building concepts and of environmental performance assessment methods to improve and optimize responsive building elements to develop and optimize new building concepts with integration of responsive building elements, HVAC-systems as well as natural and renewable...

  3. Life-Cycle Analysis of Building Retrofits at the Urban Scale—A Case Study in United Arab Emirates

    Directory of Open Access Journals (Sweden)

    Afshin Afshari

    2014-01-01

    Full Text Available A consensus is forming among experts that the best way to achieve emissions’ reduction in the near and mid-term is increasing the demand-side energy efficiency—this is especially true in developing countries where the potential for demand reduction is significant and achievable at relatively lower cost. Enhanced energy efficiency also reduces energy costs and can result in a financial benefit to end-users, if the life-cycle value of energy savings offsets the upfront cost of implementing the measure. At the same time, reducing energy demand translates into lower pull for fossil fuel import and supply/distribution capacity expansion. An ideal candidate for the implementation of demand-side energy efficiency measures is the building sector, since it contributes to a large extent to the total amount of greenhouse gases (GHGs emitted worldwide. In most developing countries, the contribution of the building sector to the total national GHG emissions is significantly higher than the worldwide average. This is in part due to the lower level of industrial activity. Other drivers of the high emissions of the building sector are the inefficiency of the envelope and technical systems of the existing buildings, as well as harsh climatic conditions requiring the use of energy intensive air-conditioning equipment. The United Arab Emirates (UAE currently have the highest ecological footprint per capita in the world. The Emirate of Abu Dhabi, the focus of this study, can be expected to have a footprint that is even higher, being the largest economy and the major oil producer among the seven Emirates. In addition to the environmental consequences of unrestrained energy consumption, the fact that energy prices are heavily subsidized in Abu Dhabi results in a significant financial burden for the government. In the UAE and the Emirate of Abu Dhabi, the air-conditioning load in buildings is the ideal target for demand-side management because it constitutes more

  4. Data Integrity-A Study of Current Regulatory Thinking and Action.

    Science.gov (United States)

    Shafiei, Nader; De Montardy, Regis; Rivera-Martinez, Edwin

    2015-01-01

    In reaction to breaches of data integrity in the pharmaceutical industry, regulatory authorities have introduced inspection approaches or initiatives with the aim of reducing occurrences of data integrity problems. This review article-based on study of 65 cases of regulatory action from 2002 to 2014-provides an overview of current regulatory thinking and action on breaches of data integrity affecting GxP (health-related regulations) processes supporting non-clinical studies, clinical studies, laboratory controls, and production controls. These case studies largely represent position of the U.S. Food and Drug Administration and the regulatory agencies affiliated with the European Medicines Agency. Also discussed is the role of human factors as a potential source of data integrity problems. The article concludes by recommending some remedial controls that could be established to avoid or reduce occurrences of data integrity problems.Lay Abstract: In fulfilling their mission to protect public health, regulatory agencies (e.g., U.S. Food and Drug Administration, European Medicines Agency) must establish confidence that medical products they approve are fit for their intended use. In so doing they rely on scientific and operational data generated during research, development, manufacturing, sales, marketing, distribution, and post-marketing surveillance activities. The level of confidence they build is directly proportional to the scientific validity and integrity of data presented to them by the sponsors of medical products. In this article we present analysis of 65 case studies that document regulatory action taken by various regulatory agencies on breach of data integrity between 2002 and 2014. The ensuing discussion on current trends largely represents position of the U.S. Food and Drug Administration and European Medicines Agency. The article concludes by proposing some remedial controls that could be established by pharmaceutical companies to avoid or reduce

  5. Monitoring success of remediation: seven case studies of moisture and mold damaged buildings.

    Science.gov (United States)

    Haverinen-Shaughnessy, Ulla; Hyvärinen, Anne; Putus, Tuula; Nevalainen, Aino

    2008-07-25

    Based on seven case studies of buildings that underwent different degrees of moisture and mold damage remediation, we aimed to develop methodology for assessment of the success of the remediation process. Methods used in gauging the success included technical monitoring of performance of building structures and heating, ventilation and air conditioning (HVAC) systems, microbial monitoring of indoor air quality (IAQ), and health effects studies of building occupants. The assessment was based on measurable change in the situations before and after remediation. Based on technical monitoring, remediation was successful in three cases, with partial improvement noted in three cases, whereas no remediation was conducted in one case. Based on microbial monitoring, improvement was detected in one, partial improvement in two and no improvement in two cases, whereas no follow-up was conducted in two cases. Health effect studies (mainly self-reported health status) showed improvement in one case, partial improvement in two cases, and no improvement in two cases, whereas no follow-up was conducted in one case, and in one case, follow-up failed due to low response rate. The results illustrate that it is possible to monitor the effects of remediation using various metrics. However, in some cases, no improvement could be observed in IAQ or occupant health, even if the remediation was considered technically successful, i.e. the remediation was fully completed as recommended. This could be due to many reasons, including: 1) all damage may not have been addressed adequately; 2) IAQ or health may not have been perceived improved regardless of remediation; and/or 3) the methods used may not have been sensitive/specific enough to detect such improvement within the 6-12 months follow-up periods after completion of the remediation. There is a need to further develop tools for monitoring and assessment of the success of moisture damage remediation in buildings.

  6. Multi-Objective Optimization for Energy Performance Improvement of Residential Buildings: A Comparative Study

    Directory of Open Access Journals (Sweden)

    Kangji Li

    2017-02-01

    Full Text Available Numerous conflicting criteria exist in building design optimization, such as energy consumption, greenhouse gas emission and indoor thermal performance. Different simulation-based optimization strategies and various optimization algorithms have been developed. A few of them are analyzed and compared in solving building design problems. This paper presents an efficient optimization framework to facilitate optimization designs with the aid of commercial simulation software and MATLAB. The performances of three optimization strategies, including the proposed approach, GenOpt method and artificial neural network (ANN method, are investigated using a case study of a simple building energy model. Results show that the proposed optimization framework has competitive performances compared with the GenOpt method. Further, in another practical case, four popular multi-objective algorithms, e.g., the non-dominated sorting genetic algorithm (NSGA-II, multi-objective particle swarm optimization (MOPSO, the multi-objective genetic algorithm (MOGA and multi-objective differential evolution (MODE, are realized using the propose optimization framework and compared with three criteria. Results indicate that MODE achieves close-to-optimal solutions with the best diversity and execution time. An uncompetitive result is achieved by the MOPSO in this case study.

  7. Building cooperation through health initiatives: an Arab and Israeli case study

    Directory of Open Access Journals (Sweden)

    Skinner Harvey A

    2007-07-01

    Full Text Available Abstract Background Ongoing conflict in the Middle East poses a major threat to health and security. A project screening Arab and Israeli newborns for hearing loss provided an opportunity to evaluate ways for building cooperation. The aims of this study were to: a examine what attracted Israeli, Jordanian and Palestinian participants to the project, b describe challenges they faced, and c draw lessons learned for guiding cross-border health initiatives. Methods A case study method was used involving 12 key informants stratified by country (3 Israeli, 3 Jordanian, 3 Palestinian, 3 Canadian. In-depth interviews were tape-recorded, transcribed and analyzed using an inductive qualitative approach to derive key themes. Results Major reasons for getting involved included: concern over an important health problem, curiosity about neighbors and opportunities for professional advancement. Participants were attracted to prospects for opening the dialogue, building relationships and facilitating cooperation in the region. The political situation was a major challenge that delayed implementation of the project and placed participants under social pressure. Among lessons learned, fostering personal relationships was viewed as critical for success of this initiative. Conclusion Arab and Israeli health professionals were prepared to get involved for two types of reasons: a Project Level: opportunity to address a significant health issue (e.g. congenital hearing loss while enhancing their professional careers, and b Meta Level: concern about taking positive steps for building cooperation in the region. We invite discussion about roles that health professionals can play in building "cooperation networks" for underpinning health security, conflict resolution and global health promotion.

  8. Review of Current FFAG Lattice Studies in North America

    Energy Technology Data Exchange (ETDEWEB)

    Berg, J. Scott; Plamer, Robert; Ruggiero, Alessandro; Trbojevic, Dejan; Keil, Eberhard; Johnstone, Carol; Sessler, Andrew; Koscielniak, Shane Rupert; Craddock, Michael

    2004-04-01

    There has been a revival of interest in the use of fixed field alternating gradient accelerators (FFAGs) for many applications, including muon accelerators, high-intensity proton sources, and medical applications. The original FFAGs, and those recently built in Japan, have been based on a so-called scaling FFAG design, for which tunes are constant and the behavior in phase space is independent of energy with the exception of a scaling factor. Activity in the US and Canada has instead mostly focused on nonscaling designs, which, while having the large energy acceptance that characterizes an FFAG, do not obey the scaling relations of the scaling FFAG. Most of these designs have been based on magnets with a linear midplane field profile. A great deal of analysis, both theoretically and numerically, has occurred on these designs, and they are very well understood at this point. Some more recent work has occurred on designs with a nonlinear field profile. Since no non-scaling FFAG has ever been built, there is interest in building a small model which would accelerate electrons and demonstrate our understanding of non-scaling FFAG design.

  9. Nearly Zero Energy Standard for Non-Residential Buildings with high Energy Demands—An Empirical Case Study Using the State-Related Properties of BAVARIA

    Directory of Open Access Journals (Sweden)

    Michael Keltsch

    2017-03-01

    Full Text Available The Energy Performance of Buildings Directive (EPBD 2010 calls for the Nearly Zero Energy Building (nZEB Standard for new buildings from 2021 onwards: Buildings using “almost no energy” are powered by renewable sources or by the energy produced by the building itself. For residential buildings, this ambitious new standard has already been reached. But for other building types, this goal is still far away. The potential of these buildings to meet a nZEB Standard was investigated by analyzing ten case studies, representing non-residential buildings with different uses. The analysis shows that the primary characteristics common to critical building types are a dense building context with a very high degree of technical installation (such as hospital, research, and laboratory buildings. The large primary energy demand of these types of buildings cannot be compensated by building- and property-related energy generation, including off-site renewables. If the future nZEB Standard were to be defined with lower requirements because of this, the state-related properties of Bavaria suggest that the real potential energy savings available in at least 85% of all new buildings would be insufficiently exploited. Therefore, it would be more useful to individualize the legal energy verification process for new buildings, to distinguish critical building types such as laboratories and hospitals from the other building types.

  10. Effects of newly designed hospital buildings on staff perceptions : a pre-post study to validate design decisions

    NARCIS (Netherlands)

    Schreuder, E.J.A.; Heel, L. van; Goedhart, R.; Dusseldorp, E.; Schraagen, J.M.C.; Burdorf, A.

    2015-01-01

    Objective: This study investigates effects of the newly built nonpatient-related buildings of a large university medical center on staff perceptions and whether the design objectives were achieved. Background: The medical center is gradually renewing its hospital building area of 200,000 m.(2) This

  11. 76 FR 74076 - Notice of Random Assignment Study To Evaluate the YouthBuild Program; Final Notice

    Science.gov (United States)

    2011-11-30

    ... Employment and Training Administration Notice of Random Assignment Study To Evaluate the YouthBuild Program... Department of Labor (Department) will conduct an evaluation to provide rigorous, nationally-representative estimates of the net impacts of the YouthBuild program. The Department has determined that it is in...

  12. Getting Their Hands Dirty: Qualitative Study on Hands-on Learning for Architectural Students in Design-build Course

    Directory of Open Access Journals (Sweden)

    Zunaibi B. Abdullah

    2011-06-01

    Full Text Available This qualitative study provides an in-depth perspective of hands-on learning through the observation and analysis of architectural students' views in a design-build program at the University of Nebraska-Lincoln during the fall semester of 2008. Qualitative data was gathered from 14 participants involved in the construction of a low energy double-storey house in the city of Lincoln, Nebraska. The study inventoried the requisite characteristics of a design-build course. Participants' views and activities were studied to ascribe the qualitative benefits of hands-on learning. In addition, students' motivation towards hands-on activities were evaluated in reference to student confidence and independence levels towards their future career as architects, designers or other design-build professionals. The findings showed the design-build course could offer a specific knowledge that link between theoretical subjects and the practical expect of building contractions.

  13. Indoor Pollution Emissions from Building Materials; Case of Study: Gypsum Boards Indoor Pollution Emissions from Building Materials; Case of Study: Gypsum Boards

    Directory of Open Access Journals (Sweden)

    Silverio Hernández Moreno

    2012-02-01

    Full Text Available Este reporte presenta una evaluación de las emisiones de materiales de construcción, al interior de los edificios que pueden causar daño a la salud de los usuarios durante la ocupación, pues emiten sustancias tóxicas al interior de los edificios. Este reporte presenta un caso de studio que evalúa a los tableros de yeso, frecuentemente usados en la construcción de muros divisorios y falsos plafones. La parte experimental se basa en un espacio tridimensional el cual simula un cuarto de cualquier tipo de edificación; por ejemplo: un salón de clases u oficina. Las condiciones ambientales al interior, tales como: ventilación, temperatura y humedad, afectan directamente las emisiones de sustancias químicas por los materiales de construcción. La metodología se basa en la comparación de materiales convencionales y materiales alternativos con distinta composición y similares características, en donde usamos métodos de prueba, condiciones ambientales, instrumentos y herramientas similares. Este es un estudio muy importante para entender los problemas relacionadoscon la contaminación ambiental, específicamente del aire y sus efectos en el interior de los edificios, y que se relaciona directamente con la salud pública e indirectamente con los sistemas constructivos y la selección de materiales en los edificios. Las pruebas concluyen que los materiales alternativos (de contenido reciclado son mejores que los tradicionales, porque reducen la contaminación del aire al interior de los edificios. This report presents an evaluation of emissions from indoor building materials that may cause health damage to the people who occupy the building, since these materials emit toxic chemicals into the air and indoor surfaces. This report presents a case study which evaluates Gypsum Boards, frequently used in the construction of dividing walls and ceilings. The experimental part of this report is based on a three-dimensional space that simulates a

  14. Space biology initiative program definition review. Trade study 5: Modification of existing hardware (COTS) versus new hardware build cost analysis

    Science.gov (United States)

    Jackson, L. Neal; Crenshaw, John, Sr.; Davidson, William L.; Blacknall, Carolyn; Bilodeau, James W.; Stoval, J. Michael; Sutton, Terry

    1989-01-01

    The JSC Life Sciences Project Division has been directly supporting NASA Headquarters, Life Sciences Division, in the preparation of data from JSC and ARC to assist in defining the Space Biology Initiative (SBI). GE Government Services and Horizon Aerospace have provided contract support for the development and integration of review data, reports, presentations, and detailed supporting data. An SBI Definition (Non-Advocate) Review at NASA Headquarters, Code B, has been scheduled for the June-July 1989 time period. In a previous NASA Headquarters review, NASA determined that additional supporting data would be beneficial to determine the potential advantages in modifying commercial off-the-shelf (COTS) hardware for some SBI hardware items. In order to meet the demands of program implementation planning with the definition review in late spring of 1989, the definition trade study analysis must be adjusted in scope and schedule to be complete for the SBI Definition (Non-Advocate) Review. The relative costs of modifying existing commercial off-the-shelf (COTS) hardware is compared to fabricating new hardware. An historical basis for new build versus modifying COTS to meet current NMI specifications for manned space flight hardware is surveyed and identified. Selected SBI hardware are identified as potential candidates for off-the-shelf modification and statistical estimates on the relative cost of modifying COTS versus new build are provided.

  15. Suitability Analysis of Office Building Design against Maintenance Cost (Case Study of Serayu Opak River Basin Organization, Yogyakarta Province

    Directory of Open Access Journals (Sweden)

    Mario Puji Hersanto

    2017-09-01

    Full Text Available This study aims to determine the effect of building design's inaccuracy against the cost of maintenance, by taking the research in Serayu Opak River Basin Organization, Water Resources Field and Water Resources Management Center in Yogyakarta Special Region. The first step is to analyze the inaccuracy of building design based on the result of interview and observation during field survey. The second step is to analyze the cost of building maintenance. The third step is to analyze the maintenance costs used to minimize the effects of the inaccurate design of the building. The result shows the inaccuracy of building design in the form of the use of clear glass without coated glass film and the absence of heat insulator on the roof of the building cause the room to become hot. The installation of rain gutters without vertical pipes, toilet facilities in the entire building is not yet complete, inadequate accessibility for persons with disabilities, and inadequate corridor design. There is a small portion of the maintenance budget used for reducing the impact of building design's inaccuracy, so it can be concluded that the design of the building is less meet the requirements of the Government regulations.

  16. Energy Efficient Improvements of Existing Buildings through Building Envelope Upgrade Case Study of High Rise Block of Flats on 76, Boulevard Partizanski Odredi in Karpos IV, Skopje

    OpenAIRE

    2016-01-01

    AIM: This research examines the important issue of energy efficient improvements to the existing building stock through building envelope upgrade. To facilitate this, the energy performance characteristics of the existing building stock were identified with a view to establishing an existing building stock type, where building envelope upgrades can contribute to a higher level of energy efficiency improvements. The literature review along with the selected building precedents was used to esta...

  17. Deterministic and Stochastic Study of Wind Farm Harmonic Currents

    DEFF Research Database (Denmark)

    Sainz, Luis; Mesas, Juan Jose; Teodorescu, Remus;

    2010-01-01

    Wind farm harmonic emissions are a well-known power quality problem, but little data based on actual wind farm measurements are available in literature. In this paper, harmonic emissions of an 18 MW wind farm are investigated using extensive measurements, and the deterministic and stochastic...... characterization of wind farm harmonic currents is analyzed. Specific issues addressed in the paper include the harmonic variation with the wind farm operating point and the random characteristics of their magnitude and phase angle....

  18. Zinc electrowinning: anode conditioning and current distribution studies

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, J.A. [Cominco Research, Cominco Ltd., Trail, British Columbia (Canada)

    2001-07-01

    In the zinc electrowinning (EW) process, Pb-Ag anodes are widely used. Prior to their use in the EW process, anodes are conditioned to form a stable oxide layer that can evolve O{sub 2} without excessive Pb contamination of the cathode and MnO{sub 2} precipitation. The most widely used conditioning techniques are: passivation in a KF-H{sub 2}SO{sub 4} electrolysis bath, chemical oxidation in a KMnO{sub 4}-H{sub 2}SO{sub 4} solution, and sandblasting. In this paper, a comparison of these treatments using flat and corrugated anodes is presented. Laboratory and industrial-scale tests carried out at Cominco's Trail and Cajamarquilla zinc plants indicated that flat anodes should be sandblasted or electrochemically passivated before their use in the Zn electrowinning process. Further, corrugated anodes should be sandblasted or chemically conditioned in a KMnO{sub 4}-H{sub 2}SO{sub 4} -electrolyte. The beneficial effects of chemical conditioning are lost if the anode is non-corrugated. Flat, chemically conditioned anodes generate up to 10 times more mud than corrugated-chemically conditioned anodes. Because anode mud growth is evenly distributed on sandblasted anodes, short-circuit frequency may decrease and anode life may increase. Sandblasting does not appear to affect anode performance. Parallel to the industrial anode conditioning tests, current distribution measurements were made. Current flow measurements were used to correct troublesome electrodes and/or bad electrical contacts. In Cajamarquilla, this technique was used in four industrial electrowinning cells and energy consumption values lower than 3000 kWh/t Zn were obtained at current efficiencies as high as 95% and at current densities up to 450 A/m{sup 2}. (author)

  19. Architecture, energy and daylight. Study of seven buildings; Arkitektur, energi og dagslys. Undersoegelse af syv bygninger

    Energy Technology Data Exchange (ETDEWEB)

    Christoffersen, J.; Petersen, E.; Svensson, O.

    2001-07-01

    The purpose of this research project was to enhance the designer's knowledge for designing buildings, rooms and window openings which utilise daylight in such a way that aesthetic and functional requirements can be met and energy consumption for electric lighting can be reduced at the same time. It was not the purpose of the project to develop guidelines but only to demonstrate how good daylight conditions and energy conservation can be achieved. The daylight conditions in the seven selected buildings were registered and assessed by the panel on two field trips in the spring of 1999. During these visits, the research team registered the location of rooms, their orientation, windows, artificial lighting etc. After the field trips, the buildings were photographed and the research group performed measurements and analyses of the lighting conditions in the rooms. However, the quality of daylight cannot be determined based only on measurements. The four professionals therefore supplemented the measurements with a subjective evaluation. The study of these seven buildings led to a number of results that must be assumed to be generally valid. A main result is that good daylight conditions in no way prevents or impedes the creation of good architecture. On the contrary, quality of daylight creates both functional as well as aesthetically satisfactory architecture. In all the investigated buildings, the ratio of glass areas to floor area is highter than 10%. In Denmark, this ratio would ensure reasonable daylight access and a view out. However, when size of glass area and daylight measurements are compared, the relationship between them is not straight-forward. The quantity and quality of daylight in buildings depend on other factors too, such as the depth of window openings, solar shading devices, opposite buildings, outdoor vegetation etc. The study points out that there are no standard solutions of how to design facades and window openings which satisfy all

  20. Indoor air quality in green buildings: A case-study in a residential high-rise building in the northeastern United States.

    Science.gov (United States)

    Xiong, Youyou; Krogmann, Uta; Mainelis, Gediminas; Rodenburg, Lisa A; Andrews, Clinton J

    2015-01-01

    Improved indoor air quality (IAQ) is one of the critical components of green building design. Green building tax credit (e.g., New York State Green Building Tax Credit (GBTC)) and certification programs (e.g., Leadership in Energy & Environmental Design (LEED)) require indoor air quality measures and compliance with allowable maximum concentrations of common indoor air pollutants. It is not yet entirely clear whether compliance with these programs results in improved IAQ and ultimately human health. As a case in point, annual indoor air quality measurements were conducted in a residential green high-rise building for five consecutive years by an industrial hygiene contractor to comply with the building's GBTC requirements. The implementation of green design measures resulted in better IAQ compared to data in references of conventional homes for some parameters, but could not be confirmed for others. Relative humidity and carbon dioxide were satisfactory according to existing standards. Formaldehyde levels during four out of five years were below the most recent proposed exposure limits found in the literature. To some degree, particulate matter (PM) levels were lower than that in studies from conventional residential buildings. Concentrations of Volatile Organic Compounds (VOCs) with known permissible exposure limits were below levels known to cause chronic health effects, but their concentrations were inconclusive regarding cancer health effects due to relatively high detection limits. Although measured indoor air parameters met all IAQ maximum allowable concentrations in GBTC and applicable LEED requirements at the time of sampling, we argue that these measurements were not sufficient to assess IAQ comprehensively because more sensitive sampling/analytical methods for PM and VOCs are needed; in addition, there is a need for a formal process to ensure rigor and adequacy of sampling and analysis methods. Also, we suggest that a comprehensive IAQ assessment should

  1. Build back better principles for economic recovery: case study of the Victorian bushfires.

    Science.gov (United States)

    Mannakkara, Sandeeka; Wilkinson, Suzanne

    This paper looks at developing build back better (BBB) principles for economic recovery using the 2009 Victorian bushfires in Australia as a case study. The concept behind BBB-based economic recovery is to rejuvenate the economy in disaster-affected communities along with rebuilding to create resilient sustainable communities. A review of the literature identified several principles that can be applied to economic recovery to build back better. Data were collected in 2010 and 2011 by conducting semi- structured interviews with stakeholders who were directly involved in the Victorian bushfires recovery efforts, along with reports and other documentation. The recovery in Victoria displayed the use of BBB-based initiatives for economic recovery. The successes and shortcomings contributed to the creation of a modified list of BBB principles for economic recovery, including: creating an economic strategy based on thorough data collection; providing effective funding through grants and flexible low-interest loans; establishing business advice and mentoring services; providing incentives for businesses; assisting speedy rebuilding of business buildings; providing subsidised employee training and up-skilling programmes; and promoting local businesses through advertising.

  2. Building America Case Study: Control Retrofits for Multifamily Domestic Hot Water Recirculation Systems, Brooklyn, New York

    Energy Technology Data Exchange (ETDEWEB)

    2016-12-01

    Domestic hot water (DHW) heating is the second largest energy end use in U.S. buildings, exceeded only by space conditioning. Recirculation systems consisting of a pump and piping loop(s) are commonly used in multifamily buildings to reduce wait time for hot water at faucets; however, constant pumping increases energy consumption by exposing supply and return line piping to continuous heat loss, even during periods when there is no demand for hot water. In this study, ARIES installed and tested two types of recirculation controls in a pair of buildings in order to evaluate their energy savings potential. Demand control, temperature modulation controls, and the simultaneous operation of both were compared to the baseline case of constant recirculation. Additionally, interactive effects between DHW control fuel reductions and space conditioning (heating and cooling) were estimated in order to make more realistic predictions of the payback and financial viability of retrofitting DHW systems with these controls. Results showed that DHW fuel consumption reduced by 7 percent after implementing the demand control technique, 2 percent after implementing temperature modulation, and 15 percent after implementing demand control and temperature modulation techniques simultaneously; recirculation pump runtime was reduced to 14 minutes or less per day. With space heating and cooling interactions included, the estimated annual cost savings were 8 percent, 1 percent, and 14 percent for the respective control techniques. Possible complications in the installation, commissioning and operation of the controls were identified and solutions offered.

  3. Building workplace social capital: A longitudinal study of student nurses' clinical placement experiences.

    Science.gov (United States)

    Materne, Michelle; Henderson, Amanda; Eaton, Emma

    2017-09-01

    Quality clinical placement experiences have been associated with nurses' workplace social capital. Social capital is broadly understood as the social organisation of trust, norms and networks that benefit society. Building social capital in the workplace may benefit experiences of staff and students. The aim of this study was to assess the impact of building workplace social capital on student nurse perceptions of clinical learning experiences. A quality improvement process was measured through repeated student surveys. First, second, third year students (n = 1176) from three universities completed a validated Student Clinical Learning Culture Survey (SCLCS) following their placement, at the commencement of quality improvement initiatives and five years later. The SCLCS measured students' perceptions of social affiliation, their motivation, satisfaction and dissatisfaction with clinical contexts. The first year of systematic changes focused on increasing student numbers along with improving communication, trust and knowledge sharing, antecedents to workplace social capital. No change was evident after the first year. Six years after commencement of building workplace social capital differences across all subscales, except dissatisfaction, were significant (p social capital that enhances student placement experiences. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Experimental study on small group behavior and crowd dynamics in a tall office building evacuation

    Science.gov (United States)

    Ma, Yaping; Li, Lihua; Zhang, Hui; Chen, Tao

    2017-05-01

    It is well known that a large percentage of occupants in a building are evacuated together with their friends, families, and officemates, especially in China. Small group behaviors are therefore critical for crowd movement. This paper aims to study the crowd dynamic considering different social relations and the impacts of small groups on crowd dynamics in emergency evacuation. Three experiments are conducted in an 11-storey office building. In the first two experiments, all participants are classmates and know each other well. They are evacuated as individuals or pairs. In the third experiment, social relations among the participants are complex. Participants consist of 8 families, 6 lovers and several individuals. Space-time features, speed characteristics and density-speed relations for each experiment are analyzed and compared. Results conclude that small group behaviors can make positive impacts on crowd dynamics when evacuees know each other and are cooperative. This conclusion is also testified by four verified experiments. In the third experiment, speeds of evacuees are lowest. Small groups form automatically with the presence of intimate social relations. Small groups in this experiment slow down the average speed of the crowd and make disturbance on the crowd flow. Small groups in this case make negative impacts on the movement of the crowd. It is because that evacuees do not know each other and they are competitive to each other. Characteristics of different types of small groups are also investigated. Experimental data can provide foundational parameters for evacuation model development and are helpful for building designers.

  5. Perceived Indoor Environment and Occupants’ Comfort in European “Modern” Office Buildings: The OFFICAIR Study

    Science.gov (United States)

    Sakellaris, Ioannis A.; Saraga, Dikaia E.; Mandin, Corinne; Roda, Célina; Fossati, Serena; de Kluizenaar, Yvonne; Carrer, Paolo; Dimitroulopoulou, Sani; Mihucz, Victor G.; Szigeti, Tamás; Hänninen, Otto; de Oliveira Fernandes, Eduardo; Bartzis, John G.; Bluyssen, Philomena M.

    2016-01-01

    Indoor environmental conditions (thermal, noise, light, and indoor air quality) may affect workers’ comfort, and consequently their health and well-being, as well as their productivity. This study aimed to assess the relations between perceived indoor environment and occupants’ comfort, and to examine the modifying effects of both personal and building characteristics. Within the framework of the European project OFFICAIR, a questionnaire survey was administered to 7441 workers in 167 “modern” office buildings in eight European countries (Finland, France, Greece, Hungary, Italy, The Netherlands, Portugal, and Spain). Occupants assessed indoor environmental quality (IEQ) using both crude IEQ items (satisfaction with thermal comfort, noise, light, and indoor air quality), and detailed items related to indoor environmental parameters (e.g., too hot/cold temperature, humid/dry air, noise inside/outside, natural/artificial light, odor) of their office environment. Ordinal logistic regression analyses were performed to assess the relations between perceived IEQ and occupants’ comfort. The highest association with occupants’ overall comfort was found for “noise”, followed by “air quality”, “light” and “thermal” satisfaction. Analysis of detailed parameters revealed that “noise inside the buildings” was highly associated with occupants’ overall comfort. “Layout of the offices” was the next parameter highly associated with overall comfort. The relations between IEQ and comfort differed by personal characteristics (gender, age, and the Effort Reward Imbalance index), and building characteristics (office type and building’s location). Workplace design should take into account both occupant and the building characteristics in order to provide healthier and more comfortable conditions to their occupants. PMID:27120608

  6. STUDI TERHADAP KONSERVASI ENERGI PADA GEDUNG SEWAKA DHARMA KOTA DENPASAR YANG MENERAPKAN KONSEP GREEN BUILDING

    Directory of Open Access Journals (Sweden)

    I Wayan Swi Putra

    2015-10-01

    Full Text Available Gedung  Sewaka  Dharma  Kota  Denpasar  dibangun  dengan  konsep  desain  green building. Dengan konsep desain green  building, gedung Sewaka Dharma diharapkan mampu menghemat energi di  dalam pengoperasiannya. Konsep desain green building yang diterapkan antara  lain,  gedung  dibuat  dengan  banyak  jendela  kaca,  memakai  sistem  ventilasi  vertikal, lingkungan  di  dalam  dan  di  luar  gedung  yang  hijau  serta  pemakaian  solar  sel  untuk  lampu penerangan  luar  dalam  mengurangi  konsumsi  energi.  Dari  hasil  studi  yang  dilakukan  ada perbedaan antara perencanaan dan realisasi dalam pembangunannya.  Suhu dan kelembaban yang tinggi mengakibatkan terjadinya pemasangan AC di masing-masing ruangan.  Suhu dan kelembaban  yang  tinggi  diakibatkan  karena  tidak  berjalannya  sistem  ventilasi  alami  pada gedung tersebut.  Hal ini mengindikasikan bahwa konsep green building yang diterapkan pada gedung  Sewaka  Dharma  tidak  mampu  menciptakan  lingkungan  kerja  yang  nyaman  bagi pegawainya.

  7. Perceived Indoor Environment and Occupants’ Comfort in European “Modern” Office Buildings: The OFFICAIR Study

    Directory of Open Access Journals (Sweden)

    Ioannis A. Sakellaris

    2016-04-01

    Full Text Available Indoor environmental conditions (thermal, noise, light, and indoor air quality may affect workers’ comfort, and consequently their health and well-being, as well as their productivity. This study aimed to assess the relations between perceived indoor environment and occupants’ comfort, and to examine the modifying effects of both personal and building characteristics. Within the framework of the European project OFFICAIR, a questionnaire survey was administered to 7441 workers in 167 “modern” office buildings in eight European countries (Finland, France, Greece, Hungary, Italy, The Netherlands, Portugal, and Spain. Occupants assessed indoor environmental quality (IEQ using both crude IEQ items (satisfaction with thermal comfort, noise, light, and indoor air quality, and detailed items related to indoor environmental parameters (e.g., too hot/cold temperature, humid/dry air, noise inside/outside, natural/artificial light, odor of their office environment. Ordinal logistic regression analyses were performed to assess the relations between perceived IEQ and occupants’ comfort. The highest association with occupants’ overall comfort was found for “noise”, followed by “air quality”, “light” and “thermal” satisfaction. Analysis of detailed parameters revealed that “noise inside the buildings” was highly associated with occupants’ overall comfort. “Layout of the offices” was the next parameter highly associated with overall comfort. The relations between IEQ and comfort differed by personal characteristics (gender, age, and the Effort Reward Imbalance index, and building characteristics (office type and building’s location. Workplace design should take into account both occupant and the building characteristics in order to provide healthier and more comfortable conditions to their occupants.

  8. Integrated sustainable urban infrastructures in building projects

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Quitzau, Maj-Britt; Elle, Morten

    2007-01-01

    Current strategies in urban planning and development merely promote standardized building solutions, while failing to prioritize innovative approaches of integration between building projects and sustainable urban infrastructures. As a result of this, urban infrastructures – the urban veins...... – are outdated from a sustainability perspective. This paper looks into more holistic ways of approaching building projects and discuss whether this provide a basis for an increased integration of urban infrastructures within building projects. In our study, we especially emphasise how conventional ways...... of approaching building projects are influenced by lock-in of existing infrastructural systems and compare this with two examples of more holistic ways of approaching building projects, developed by two architecture firms. The paper points out that such holistic perspective in building projects provide...

  9. Interference filters as an enhancement tool for infrared thermography in humidity studies of building elements

    Science.gov (United States)

    Gayo, E.; de Frutos, J.

    1997-06-01

    In the present work, the utility of infrared thermography applied to the study of moisture in builiding materials or in buildings (including those cases in which the water content is very high) is shown. Moreover, an increase in the information content of the thermal image by the use of suitable interference filters is demonstrated. The use of such filters allows us to determine the kind of hydric process. In the present work, different examples are given illustrating the use of infrared thermography (with and without interference filters) when moisture movement is studied.

  10. Lessons Learned from Case Studies of Six High-Performance Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Torcellini, P.; Pless, S.; Deru, M.; Griffith, B.; Long, N.; Judkoff, R.

    2006-06-01

    Commercial buildings have a significant impact on energy use and the environment. They account for approximately 18% (17.9 quads) of the total primary energy consumption in the United States (DOE 2005). The energy used by the building sector continues to increase, primarily because new buildings are added to the national building stock faster than old buildings are retired. Energy consumption by commercial buildings will continue to increase until buildings can be designed to produce more energy than they consume. As a result, the U.S. Department of Energy's (DOE) Building Technologies Program has established a goal to create the technology and knowledge base for marketable zero-energy commercial buildings (ZEBs) by 2025.

  11. A Study on Nuclear Blast Overpressure on Buildings and other infrastructures using Geospatial Technology

    Directory of Open Access Journals (Sweden)

    D. Thirumalaivasan

    2012-01-01

    Full Text Available An Improvised Nuclear Device or nuclear bomb of yield 10 kiloton to 20 kiloton explodes in any major city due to terrorism or any other reason can cause catastrophic damages on the building's and other infrastructures and also shutting down of critical life-safety systems.. The explosion may produce blast overpressure, thermal radiation and harmful instant and delayed nuclear radiations. The buildings and other Civil Engineering structures may be highly vulnerabke due to the blast overpressure from the explosion and thermal radiation. In this present study Remote Sensing and Geographical Information System is effectively utilized to model the blast affected zone from the ground Zero of the study area. This study also introduces different emperical methods to estimate blast loads and structural response. The purpose is to describe the blast effects of a nuclear explosion, thereby informing people of the real dangers posed by nuclear weapons. Therefore, as a case study, we consider a hypothetical City as a target for detonation. Due to security reasons the data for existing City is not used for this study purpose. The study area is hypothetically detonated with a 15 kiloton yield nuclear explosion as surface blast and wind spped is assumed as 5 meters per second.

  12. 浅谈绿色建筑现状及对策建议%On the Current Situation of Green Building and Countermeasures

    Institute of Scientific and Technical Information of China (English)

    盘钦卿; 陈健

    2015-01-01

    在可持续发展的前提下,绿色建筑已经成为建设项目的发展趋势。为了更好地建设绿色建筑,本文分析绿色建筑的现状及前景,提出绿色建筑发展的对策建议,为绿色建筑的建设发展提供科学的参考依据。%On the premise of sustainable development, green building has become the development trend of the construction project. In order to better the construction of green building, this article analyzes the present situation and prospect of green building, puts forward countermeasures and suggestions for the development of green building, to provide scientific reference for the construction development of green building.

  13. Effects of Newly Designed Hospital Buildings on Staff Perceptions: A Pre-Post Study to Validate Design Decisions.

    Science.gov (United States)

    Schreuder, Eliane; van Heel, Liesbeth; Goedhart, Rien; Dusseldorp, Elise; Schraagen, Jan Maarten; Burdorf, Alex

    2015-01-01

    This study investigates effects of the newly built nonpatient-related buildings of a large university medical center on staff perceptions and whether the design objectives were achieved. The medical center is gradually renewing its hospital building area of 200,000 m.(2) This redevelopment is carefully planned and because lessons learned can guide design decisions of the next phase, the medical center is keen to evaluate the performance of the new buildings. A pre- and post-study with a control group was conducted. Prior to the move to the new buildings an occupancy evaluation was carried out in the old setting (n = 729) (pre-study). Post occupation of the new buildings another occupancy evaluation (post-study) was carried out in the new setting (intervention group) and again in some old settings (control group) (n = 664). The occupancy evaluation consisted of an online survey that measured the perceived performance of different aspects of the building. Longitudinal multilevel analysis was used to compare the performance of the old buildings with the new buildings. Significant improvements were found in indoor climate, perceived safety, working environment, well-being, facilities, sustainability, and overall satisfaction. Commitment to the employer, working atmosphere, orientation, work performance, and knowledge sharing did not improve. The results were interpreted by relating them to specific design choices. We showed that it is possible to measure the performance improvements of a complex intervention being a new building design and validate design decisions. A focused design process aiming for a safe, pleasant and sustainable building resulted in actual improvements in some of the related performance measures. © The Author(s) 2015.

  14. Building performance modelling for sustainable building design

    National Research Council Canada - National Science Library

    Oduyemi, Olufolahan; Okoroh, Michael

    2016-01-01

    ...) called Ecotect for sustainable building design. Finally, it introduces a design tool analysis of a case study using Ecotect to evaluate various what if scenarios on a proposed multi-use building...

  15. A case study of the use of GPR for rehabilitation of a classified Art Deco building: The InovaDomus house

    Science.gov (United States)

    Barraca, Nuno; Almeida, Miguel; Varum, Humberto; Almeida, Fernando; Matias, Manuel Senos

    2016-04-01

    Ancient buildings in historical town centers can be protected by Cultural Heritage legislation, thus implying that any rehabilitation must respect their main architectural features. These concerns also apply to Modern and Contemporary buildings, in particular if they are important examples of architectural styles from those periods. These extra problems, or motivations, add to the inherent structural delicacy of ancient building restoration that requires detailed knowledge of the building foundations, characteristics and materials, modification history, infrastructure mapping, current pathologies, etc., all relevant information for an informed rehabilitation project. Such knowledge is seldom available before the actual rehabilitation works begin, and the usual invasive preliminary surveys are frequently expensive, time-consuming and likely significantly alter/damage the building's main features or structural integrity. Hence, the current demand for indirect, non-invasive, reliable and high resolution imagery techniques able to produce relevant information at the early stages of a rehabilitation project. The present work demonstrates that Ground Penetrating Radar (GPR or Georadar) surveys can provide a priori knowledge on the structure, construction techniques, materials, history and pathologies in a classified Modern Age building. It is also shown that the use of GPR on these projects requires carefully designed surveys, taking into account the known information, spatial constraints, environmental noise, nature and dimensions of the expected targets and suitable data processing sequences. Thus, if properly applied, GPR produces high-resolution results crucial for sound engineering/architectural interventions aiming to restore and renovate Modern and Contemporary buildings, with (1) focus on the overall quality of the end-result, (2) no damage inflicted to the existing structure, (3) respect of the building's historical coherence and architectural elements and

  16. Case study of seismic performance assessment of irregular RC buildings: hospital structure of Avezzano (L'Aquila, Italy)

    Science.gov (United States)

    Ferraioli, Massimiliano

    2015-03-01

    Most published studies on inelastic earthquake response of non-symmetric buildings are based on simplified inelastic, highly idealized models, while general conclusions regarding the inelastic torsional response of multistory building are still lacking. This paper aims to provide a useful contribution in the study of the torsional response of real irregular buildings. To this aim, the manuscript reports the comprehensive study on the seismic vulnerability of an irregular RC building: the hospital building of Avezzano (L'Aquila Italy). For this multi-story building, which is irregular in both plan and elevation, the application of nonlinear static evaluation procedures is by no means straightforward. The study proposes a nonlinear static procedure based on pushover analysis under the multimodal distribution of lateral loads and a capacity spectrum method. This pushover procedure accounts for mass distribution, higher modes contribution and mode-shapes correlation. Furthermore, due to its non-iterative feature, it avoids problems of non-convergence and multiple solutions of the conventional capacity spectrum method. Applied to a real case study, the procedure is used to investigate, in a 3D plan irregular building, the sensitivity of torsional inelastic response to lateral force distribution, higher modes contribution, accidental eccentricity and controlled point for monitoring the target displacement.

  17. A study of the current collecting sectors of a U-25B diagonal megnetohydrodynamic generator

    Energy Technology Data Exchange (ETDEWEB)

    Kirillov, V.V.; Panovka, M.Ya.; Semenov, V.D.; Sokolov, Yu.N.

    1983-01-01

    The results are cited of an experimental study and a calculated analysis of the operation of current collecting sectors of the U-25B magnetohydrodynamic (MHD) generator. The effect was studied of the parameters of the current, the coefficient of electrical loading, the disposition of the current collecting sectors (T) relative to the diagram of the magnetic field on the distribution of current along the length of the current collecting sectors. It is established that with optimal disposition of the current collecting sectors a uniform distribution of current is achieved. A simplified calculation model of the current collecting sector is developed. It is shown that the experimental and calculated relationships match well. The effect of the ballast resisters installed in the current collecting circuits on the distribution of current is examined. Their positive role in preventing current overloads on the frames and in supporting the uniform distribution of current is noted.

  18. The Study of the Geomagnetic Variation for Sq current System

    Science.gov (United States)

    Zhao, X.; Du, A.

    2012-04-01

    The solar quiet variation (Sq) with a period of 24 hrs is a typical one of the quiet variations. Sq is generally caused by atmospheric tide-dynamo in ionosphere and it is controlled by the electric field, electric conductivity in ionosphere and neutral wind in middle-high altitude atmosphere. In our work, the geomagnetic field data observed by 90 ground-based observatories is used to analyze the local time variation of Sq. Sq is derived from five quiet-day geomagnetic data in every month by the FFT method. According to the pattern of geomagnetic X component in Sq, there is a prenoon-postnoon (before noon and after noon) asymmetry. This asymmetry is obvious in spring, summer and winter. The X component at 12:00-13:00 LT is about 5 nT larger than it at 11:00-12:00 LT. The ratio between the X component of daily variable amplitude and Y component of daily variable amplitude in middle and low (high) latitude regions in summer is greater (smaller) than that in winter. Used the sphere harmonic analysis method, the Sq equivalent current system is obtained. From the pattern of Sq current system, the prenoon-postnoon asymmetry may be caused by the electric field in the high latitude region. This electric field has two effects: the one is that the electric field from high latitude maps to the low latitude region; the other is this electric field penetrate to the middle latitude region directly. The combined action of these two effects makes the prenoon-postnoon asymmetry of Sq. The asymmetry also has an obvious seasonal effect. It may relate to the polar Sq and DP2 in the high latitude region.

  19. The current status of orbital experiments for UHECR studies

    Science.gov (United States)

    Panasyuk, M. I.; Casolino, M.; Garipov, G. K.; Ebisuzaki, T.; Gorodetzky, P.; Khrenov, B. A.; Klimov, P. A.; Morozenko, V. S.; Sakaki, N.; Saprykin, O. A.; Sharakin, S. A.; Takizawa, Y.; Tkachev, L. G.; Yashin, I. V.; Zotov, M. Yu

    2015-08-01

    Two types of orbital detectors of extreme energy cosmic rays are being developed nowadays: (i) TUS and KLYPVE with reflecting optical systems (mirrors) and (ii) JEM-EUSO with high- transmittance Fresnel lenses. They will cover much larger areas than existing ground-based arrays and almost uniformly monitor the celestial sphere. The TUS detector is the pioneering mission developed in SINP MSU in cooperation with several Russian and foreign institutions. It has relatively small field of view (±4.5°), which corresponds to a ground area of 6.4 • 103 km2. The telescope consists of a Fresnel-type mirror-concentrator (∼ 2 m2) and a photo receiver (a matrix of 16 x 16 photomultiplier tubes). It is to be deployed on the Lomonosov satellite, and is currently at the final stage of preflight tests. Recently, SINP MSU began the KLYPVE project to be installed on board of the Russian segment of the ISS. The optical system of this detector contains a larger primary mirror (10 m2), which allows decreasing the energy threshold. The total effective field of view will be at least ±14° to exceed the annual exposure of the existing ground-based experiments. Several configurations of the detector are being currently considered. Finally, JEM-EUSO is a wide field of view (±30°) detector. The optics is composed of two curved double-sided Fresnel lenses with 2.65 m external diameter, a precision diffractive middle lens and a pupil. The ultraviolet photons are focused onto the focal surface, which consists of nearly 5000 multi-anode photomultipliers. It is developed by a large international collaboration. All three orbital detectors have multi-purpose character due to continuous monitoring of various atmospheric phenomena. The present status of development of the TUS and KLYPVE missions is reported, and a brief comparison of the projects with JEM-EUSO is given.

  20. Comparative study between an alternating current (AC) and a direct current (DC) electrification of an urban railway

    OpenAIRE

    Garriga Turu, Jordi

    2015-01-01

    This study will evaluate technically, energetic and economically the traction electrification network of the line Barcelona – Vallès operated by Ferrocarrils de la Generalitat de Catalunya (FGC) in the existing voltage system (1500 Vdc) and a new electrification under alternative current (25 kVac) will be proposed to be as well studied. The results obtained will be compared in order to obtain decision factors on which system best fits.

  1. A study of earthquake-induced building detection by object oriented classification approach

    Science.gov (United States)

    Sabuncu, Asli; Damla Uca Avci, Zehra; Sunar, Filiz

    2017-04-01

    Among the natural hazards, earthquakes are the most destructive disasters and cause huge loss of lives, heavily infrastructure damages and great financial losses every year all around the world. According to the statistics about the earthquakes, more than a million earthquakes occur which is equal to two earthquakes per minute in the world. Natural disasters have brought more than 780.000 deaths approximately % 60 of all mortality is due to the earthquakes after 2001. A great earthquake took place at 38.75 N 43.36 E in the eastern part of Turkey in Van Province on On October 23th, 2011. 604 people died and about 4000 buildings seriously damaged and collapsed after this earthquake. In recent years, the use of object oriented classification approach based on different object features, such as spectral, textural, shape and spatial information, has gained importance and became widespread for the classification of high-resolution satellite images and orthophotos. The motivation of this study is to detect the collapsed buildings and debris areas after the earthquake by using very high-resolution satellite images and orthophotos with the object oriented classification and also see how well remote sensing technology was carried out in determining the collapsed buildings. In this study, two different land surfaces were selected as homogenous and heterogeneous case study areas. In the first step of application, multi-resolution segmentation was applied and optimum parameters were selected to obtain the objects in each area after testing different color/shape and compactness/smoothness values. In the next step, two different classification approaches, namely "supervised" and "unsupervised" approaches were applied and their classification performances were compared. Object-based Image Analysis (OBIA) was performed using e-Cognition software.

  2. A study on the seismic behavior of a retrofitted building based on nonlinear static and dynamic analyses

    Institute of Scientific and Technical Information of China (English)

    Esra Mete Güneyisi; Gülay Altay

    2005-01-01

    This study describes the seismic performance of an existing five storey reinforced concrete building which represents the typical properties of low-rise non-ductile buildings in Turkey. The effectiveness of shear walls and the steel bracings in retrofitting the building was examined through nonlinear static and dynamic analyses. By using the nonlinear static analysis, retrofitted buildings seismic performances under lateral seismic load were compared with each other.Moreover, the performance points and response levels of the existing and retrofitting cases were determined by way of the capacity-spectrum method described in ATC-40 (1996). For the nonlinear dynamic analysis the records were selected to represent wide ranges of duration and frequency content. Considering the change in the stiffness and the energy dissipation capacities, the performance of the existing and retrofitted buildings were evaluated in terms of story drifts and damage states.It was found that each earthquake record exhibited its own peculiarities, dictated by frequency content, duration, sequence of peaks and their amplitude. The seismic performance of retrofitted buildings resulted in lower displacements and higher energy dissipation capacity depending mainly on the properties of the ground motions and the retrofitting strategies. Moreover,severe structural damage (irreparable or collapse) was observed for the existing building. However, buildings with retrofit alternatives exhibited lower damage levels changing from no damage to irreparable damage states.

  3. Building Spiritual Care in Nursing: An Overview of Ku's Spiritual Studies in Taiwan.

    Science.gov (United States)

    Ku, Ya-Lie

    This paper describes the overview of Ku's spiritual literature on nursing through five stages in Taiwan: the development of a spiritual framework, a scale of spiritual distress, a spiritual care model, a spiritual nursing course, and a spiritual care book in nursing. The article demonstrates the process of building spiritual care in nursing from constructing theoretical frameworks, measurements, and applying to education. The integrative overview of Ku's spiritual studies developed in this article could be an example in clinical and education fields for nurse administrators to develop spiritual capabilities.

  4. Efficacy of integrated green design strategies in meeting green building criteria: A South Africa Study

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2010-05-01

    Full Text Available of a green building using the Green Star SA Office Design v1 (GBCSA 2008) rating tool. Green-based design in the context of this study means designing “the human habitat with a sensitivity to ecological principles” (Wines 2008a:14); “a more socially... responsible and environmentally integrated approach” (Wines 2008b:14); design that mirrors “nature’s deep interconnections in our own epistemology of design” (Van der Ryn and Cowan 1996a:x); “any form of design that minimises environmentally destructive...

  5. The current status of orbital experiments for UHECR studies

    CERN Document Server

    Panasyuk, M I; Garipov, G K; Ebisuzaki, T; Gorodetzky, P; Khrenov, B A; Klimov, P A; Morozenko, V S; Sakaki, N; Saprykin, O A; Sharakin, S A; Takizawa, Y; Tkachev, L G; Yashin, I V; Zotov, M Yu

    2015-01-01

    Two types of orbital detectors of extreme energy cosmic rays are being developed nowadays: (i) TUS and KLYPVE with reflecting optical systems (mirrors) and (ii) JEM-EUSO with high-transmittance Fresnel lenses. They will cover much larger areas than existing ground-based arrays and almost uniformly monitor the celestial sphere. The TUS detector is the pioneering mission developed in SINP MSU in cooperation with several Russian and foreign institutions. It has relatively small field of view (+/-4.5 deg), which corresponds to a ground area of 6.4x10^3 sq.km. The telescope consists of a Fresnel-type mirror-concentrator (~2 sq.m) and a photo receiver (a matrix of 16x16 photomultiplier tubes). It is to be deployed on the Lomonosov satellite, and is currently at the final stage of preflight tests. Recently, SINP MSU began the KLYPVE project to be installed on board of the Russian segment of the ISS. The optical system of this detector contains a larger primary mirror (10 sq.m), which allows decreasing the energy thr...

  6. Current studies on human papillomavirus in Saudi Arabia.

    Science.gov (United States)

    Alhamlan, Fatimah Saeed; Al-Qahtani, Ahmed A; Al-Ahdal, Mohammed N

    2015-07-04

    Human papillomavirus (HPV) infection is a significant etiological factor and an important prognosticator in cervical cancer. Indeed, researchers worldwide have confirmed these roles for high-risk HVPs in over 70% of cervical cancer cases. According to the World Health Organization, approximately 561,200 new cancer cases (5.2% of all new cancers) are attributed to HPV infection. Over 120 types of HPV are classified further as either low-risk HPV (LR-HPV) or high-risk HPV (HR-HPV) based on their oncological potential of transforming cells. The LR-HPV types cause benign hyperproliferative lesions (i.e. genital warts) while the HR-HPV types are strongly associated with premalignant and malignant cervical lesions. Data on the prevalence of HPV, survival of infected patients, and mortality rate are scarce in Saudi Arabia. The unsubstantiated assumption of a low prevalence of HPV in Saudi Arabia has contributed to limiting HPV research in this conservative country. Therefore, the goal of this review is to shed light on the current HPV research being conducted and the prevalence of HPV in Saudi Arabia.

  7. Retooling the Social Studies Classroom for the Current Generation

    Science.gov (United States)

    Wilson, Elizabeth K.; Wright, Vivian H.; Inman, Christopher T.; Matherson, Lisa H.

    2011-01-01

    Digital technologies have changed the way students read and communicate. Subsequently, teachers must use technology to engage their students in learning. This article illustrates the value of using Web 2.0 tools (blogs, wikis, and digital media-sharing) in the social studies classroom. Additionally, a social studies teacher shares insights into…

  8. A Review of Current Studies on Human Capital

    Institute of Scientific and Technical Information of China (English)

    黄思雅

    2012-01-01

      This paper introduces some previous studies on human capital, mainly regarding human capital’s properties and its relationship with corporate performance and capital structure. This study shows the importance of human capital and suggests that managers should pay more attention to employees.

  9. Review of current study methods for VRU safety

    DEFF Research Database (Denmark)

    Andersen, Camilla Sloth; Kamaluddin, Noor Azreena; Várhelyi, András

    written questionnaires (either online or paper-based), interviews may be performed (either face-to-face or via telephone) and people may be asked to report their accident via an app on their mobile device. The method for gaining self-reported information thus varies greatly – and so does the information...... that people are asked to give. In most studies, only the number of accidents in which the respondent was involved is relevant for the researcher. In other studies, respondents are asked about possible accident causation factors, and some studies deal with respondents’ recall of the accident details. In other...

  10. Current approaches of genome-wide association studies

    Institute of Scientific and Technical Information of China (English)

    Jianfeng Xu

    2008-01-01

    @@ With rapid advances in high-throughput genotyping technology and the great increase in information available on SNPs throughout the genuine, genuine-wide association(GWA) studies have now become feasible.

  11. Cost-of-Illness Studies: A Review of Current Methods

    OpenAIRE

    Ebere Akobundu; Jing Ju; Lisa Blatt; C Daniel Mullins

    2006-01-01

    The number of cost-of-illness (COI) studies has expanded considerably over time. One outcome of this growth is that the reported COI estimates are inconsistent across studies, thereby raising concerns over the validity of the estimates and methods. Several factors have been identified in the literature as reasons for the observed variation in COI estimates. To date, the variation in the methods used to calculate costs has not been examined in great detail even though the variations in methods...

  12. The role of CSR engagement in the Internal Brand Building process : An exploratory study of Service firms

    OpenAIRE

    Emmanuel, Chidiebere; Eriksson, Eva

    2016-01-01

    This study explores how service firms incorporate CSR activities within the internal brand building process. It was found that CSR does influence and is implemented in every stage of our theoretical framework of the internal brand building process. The study was based on interviews conducted on managers and employees of service firms in the Netherlands and in Sweden.  CSR is an evolving concept, increasingly becoming important in affecting the consumption decisions of service firm’s customers...

  13. Building a competent health manager at district level: a grounded theory study from Eastern Uganda.

    Science.gov (United States)

    Tetui, Moses; Hurtig, Anna-Karin; Ekirpa-Kiracho, Elizabeth; Kiwanuka, Suzanne N; Coe, Anna-Britt

    2016-11-21

    Health systems in low-income countries are often characterized by poor health outcomes. While many reasons have been advanced to explain the persistently poor outcomes, management of the system has been found to play a key role. According to a WHO framework, the management of health systems is central to its ability to deliver needed health services. In this study, we examined how district managers in a rural setting in Uganda perceived existing approaches to strengthening management so as to provide a pragmatic and synergistic model for improving management capacity building. Twenty-two interviews were conducted with district level administrative and political managers, district level health managers and health facility managers to understand their perceptions and definitions of management and capacity building. Kathy Charmaz's constructive approach to grounded theory informed the data analysis process. An interative, dynamic and complex model with three sub-process of building a competent health manager was developed. A competent manager was understood as one who knew his/her roles, was well informed and was empowered to execute management functions. Professionalizing health managers which was viewed as the foundation, the use of engaging learning approaches as the inside contents and having a supportive work environment the frame of the model were the sub-processes involved in the model. The sub-processes were interconnected although the respondents agreed that having a supportive work environment was more time and effort intensive relative to the other two sub-processes. The model developed in our study makes four central contributions to enhance the WHO framework and the existing literature. First, it emphasizes management capacity building as an iterative, dynamic and complex process rather than a set of characteristics of competent managers. Second, our model suggests the need for professionalization of health managers at different levels of the health

  14. Case-study of thermo active building systems in Japanese climate

    DEFF Research Database (Denmark)

    Li, Rongling; Yoshidomi, Togo; Ooka, Ryozo

    2015-01-01

    Thermo active building systems (TABS) have been applied in office buildings as a promising energy efficient solution in many European countries. The utilization of building thermal mass helps to provide high quality thermal environments with less energy consumption. However, the concept of TABS...... is entirely new in Japan. This paper introduces and evaluates TABS under Tokyo weather conditions to clarify the potential of use TABS in Japan. Cooling capacity of thermo active building systems used in an office building was evaluated by means of dynamic simulations. Two central rooms of the office were...

  15. Building trust in biotechnology crops in light of the Arab Spring: a case study of Bt maize in Egypt

    Directory of Open Access Journals (Sweden)

    Ezezika Obidimma C

    2012-11-01

    Full Text Available Abstract Background The case of Bacillus thuringiensis (Bt maize in Egypt presents a unique perspective on the role of trust in agricultural biotechnology (agbiotech public-private partnerships (PPPs. This is especially relevant given the recent pro-democracy uprisings that spread throughout the Arab world that have significantly impacted the current political climate and status of both the public and private sector, and especially public-private collaborative initiatives. This case study aims to shed light on various trust-building practices adopted, and trust-related challenges faced, in the Bt maize project in Egypt. Methods We reviewed published materials on Bt maize in Egypt and collected data through direct observations and semi-structured, face-to-face interviews with stakeholders of the Bt maize project in Egypt. Data from the interviews were analyzed based on emergent themes to create a comprehensive narrative on how trust is understood and built among the partners and with the community. Results We have distilled five key lessons from this case study. First, it is important to have transparent interactions and clearly defined project priorities, roles and responsibilities among core partners. Second, partners need to engage farmers by using proven-effective, hands-on approaches as a means for farmers to build trust in the technology. Third, positive interactions with the technology are important; increased yields and secure income attributable to the seed will facilitate trust. Fourth, there is a need for improved communication strategies and appropriate media response to obviate unwarranted public perceptions of the project. Finally, the political context cannot be ignored; there is a need to establish trust in both the public and private sector as a means to secure the future of agbiotech PPPs in Egypt. Conclusions Most important to the case of Egypt is the effect of the current political climate on project success. There is reason

  16. Development of Residential Prototype Building Models and Analysis System for Large-Scale Energy Efficiency Studies Using EnergyPlus

    Energy Technology Data Exchange (ETDEWEB)

    Mendon, Vrushali V.; Taylor, Zachary T.

    2014-09-10

    ABSTRACT: Recent advances in residential building energy efficiency and codes have resulted in increased interest in detailed residential building energy models using the latest energy simulation software. One of the challenges of developing residential building models to characterize new residential building stock is to allow for flexibility to address variability in house features like geometry, configuration, HVAC systems etc. Researchers solved this problem in a novel way by creating a simulation structure capable of creating fully-functional EnergyPlus batch runs using a completely scalable residential EnergyPlus template system. This system was used to create a set of thirty-two residential prototype building models covering single- and multifamily buildings, four common foundation types and four common heating system types found in the United States (US). A weighting scheme with detailed state-wise and national weighting factors was designed to supplement the residential prototype models. The complete set is designed to represent a majority of new residential construction stock. The entire structure consists of a system of utility programs developed around the core EnergyPlus simulation engine to automate the creation and management of large-scale simulation studies with minimal human effort. The simulation structure and the residential prototype building models have been used for numerous large-scale studies, one of which is briefly discussed in this paper.

  17. The Course of Schizophrenia: E. Kraepelin's View and Current Studies

    Directory of Open Access Journals (Sweden)

    Norbert Müller

    2014-10-01

    Full Text Available Kraepelin's concept of dementia praecox and Bleuler's concept of the group of schizophrenias differ mainly under the aspect of course of the disorder. Follow-up studies play an important role for research regarding course, outcome and prognosis of psychiatric disorders, especially in terms of validation of psychiatric diagnosis and other psychiatric concepts, such as the concept of schizophrenic negative symptoms. Long-term studies also have their place in the description and evaluation of first treatment procedures. This paper will describe some general aspects of the long-term course and outcome of schizophrenic psychoses. The problem of relapses and relapse prevention will then be discussed. Especially data from recent studies will be considered in this overview.

  18. The Role of Consumer Experiences in Building the image of brands: A Study in Airlines

    Directory of Open Access Journals (Sweden)

    Ana Iris Tomás Vasconcelos

    2015-04-01

    Full Text Available Studies on brand and consumer experience gained emphasis from the twentieth century, however the relationship between these themes still has gaps. Therefore, this study examines the role of consumer experiences in building the brand image through the identification of thoughts, feelings and actions arising from consumer experiences with airlines, and the types of associations that the consumer makes such marks. Therefore, a variation of qualitative critical incident technique was used, considering those remembered experiences that have excelled in consumer perception, interviewing ten users of air services, based on a two parts semi-structured form: description of experiences with airlines and information about the image of the brands of airlines. The analyzed data have revealed that thoughts, feelings and actions arising from consumer experiences become important elements in shaping the perception of brands of airlines. Through the consumption experience, consumers mainly use the service attributes to build their perception of the marks of the airlines. These attributes are used either directly as to support other types of associations such as those related to company size.

  19. Building Energy Storage Panel Based on Paraffin/Expanded Perlite: Preparation and Thermal Performance Study

    Directory of Open Access Journals (Sweden)

    Xiangfei Kong

    2016-01-01

    Full Text Available This study is focused on the preparation and performance of a building energy storage panel (BESP. The BESP was fabricated through a mold pressing method based on phase change material particle (PCMP, which was prepared in two steps: vacuum absorption and surface film coating. Firstly, phase change material (PCM was incorporated into expanded perlite (EP through a vacuum absorption method to obtain composite PCM; secondly, the composite PCM was immersed into the mixture of colloidal silica and organic acrylate, and then it was taken out and dried naturally. A series of experiments, including differential scanning calorimeter (DSC, scanning electron microscope (SEM, best matching test, and durability test, have been conducted to characterize and analyze the thermophysical property and reliability of PCMP. Additionally, the thermal performance of BESP was studied through a dynamic thermal property test. The results have showed that: (1 the surface film coating procedure can effectively solve the leakage problem of composite phase change material prepared by vacuum impregnation; (2 the optimum adsorption ratio for paraffin and EP was 52.5:47.5 in mass fraction, and the PCMP has good thermal properties, stability, and durability; and (3 in the process of dynamic thermal performance test, BESP have low temperature variation, significant temperature lagging, and large heat storage ability, which indicated the potential of BESP in the application of building energy efficiency.

  20. Feasibility Study to Identify Potential Reductions in Energy Use in Tribal Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, Willie [Confederated Salish and Kootenai Tribes, Pablo, MT (United States)

    2017-03-30

    Under this project, the Confederated Salish and Kootenai Tribes (CSKT) assessed the technical and economic feasibility of energy efficiency improvements to existing Tribally-owned buildings. The feasibility study followed a systematic approach in identifying, selecting, and ranking recommended measures, recognizing that the appropriateness of a measure would depend not only on technical issues but also on institutional and organizational issues, such as financing options and occupant requirements. The completed study provided the Tribes with the information needed to commit necessary resources to reduce the energy use and cost in approximately 40 Tribal buildings, including the changes that may be needed in each facility’s operation and maintenance and personnel requirements. It also presented an economic analysis of energy-efficiency capital improvements and an annotated list of financing options and possible funding sources for implementation and an overall strategy for implementation. This project was located in various Tribal communities located throughout the Flathead Indian Reservation in Western Montana. Notice: The following is a compilation of Annual Program Review Presentations, Award Modifications, and Quarterly Progress Reports submitted to the Department of Energy’s (DOE) Office of Indian Energy Policy and Programs by the Confederated Salish and Kootenai Tribes under agreement DE-EE0005171. This report covers project activities from September 30, 2011 through December 31, 2014 and has been uploaded to OSTI by DOE as a substitute for the required Final Technical Report which was not received by DOE from the project recipient.

  1. Research capacity building in midwifery: Case study of an Australian Graduate Midwifery Research Intern Programme.

    Science.gov (United States)

    Hauck, Yvonne L; Lewis, Lucy; Bayes, Sara; Keyes, Louise

    2015-09-01

    Having the research capacity to identify problems, create new knowledge and most importantly translate this knowledge into practice is essential within health care. Midwifery, as well as other health professions in Australia, is challenged in building its research capacity to contribute evidence to inform clinical practice. The aim of this project was to evaluate an innovative Graduate Midwifery Research Intern Programme offered at a tertiary obstetric hospital in Western Australia, to determine what was working well and how the programme could be improved. A case study approach was used to gain feedback from graduate midwives within a Graduate Research Intern (GRI) Programme. In addition outcomes were compiled of all projects the GRI midwives contributed to. Six GRI midwives participated in a survey comprising of four open ended questions to provide feedback about the programme. Findings confirm that the GRI programme increased the graduates understanding of how research works, its capacity to define a problem, generate new knowledge and inform clinical practice. The GRI midwives' feedback suggested the programme opened their thinking to future study and gave them enhanced insight into women's experiences around childbirth. To grow our knowledge as a professional group, midwives must develop and promote programmes to build our pool of research capable midwives. By sharing our programme evaluation we hope to entice other clinical settings to consider the value in replicating such a programme within their context. Copyright © 2015 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

  2. Empirical Study of the Origins and Causes of Variation Orders in Building Projects

    Directory of Open Access Journals (Sweden)

    Dr. Simon Eigbe

    2016-10-01

    Full Text Available Variations or changes to construction plans have been identified as a major problem in construction projects. Variations have adverse impact on project delivery. Effective management of variations, therefore, is critical to accomplishing project objectives; and this commences with identifying the sources and causes of variations. This paper presents the results of a study of the origins and causes of variation orders in building projects within the Federal Government of Nigeria (FGN: Ministries, Departments, and Agencies (MDGs. Extensive review of relevant literature has been provided. The methodology adopted involved the use of structured questionnaires administered on the MDGs ensuring a fair representation of the geo-political zones of the country. Use was made of field assistants to facilitate the administration of questionnaires. An ex-post facto research design was also employed in the data gathering. Analysis of data was done using descriptive and inferential statistics. The results reveal that variation orders are common in building projects. The client was shown to be the most frequently involved origin agent of variation orders as a result of inadequate or unclear brief, and change in plan or scope. The study concludes with recommendations that project planning; and engagement of project officers are effective means of formulating clear project briefs in order to minimize variation orders and enhance project performance

  3. Building Energy Storage Panel Based on Paraffin/Expanded Perlite: Preparation and Thermal Performance Study.

    Science.gov (United States)

    Kong, Xiangfei; Zhong, Yuliang; Rong, Xian; Min, Chunhua; Qi, Chengying

    2016-01-25

    This study is focused on the preparation and performance of a building energy storage panel (BESP). The BESP was fabricated through a mold pressing method based on phase change material particle (PCMP), which was prepared in two steps: vacuum absorption and surface film coating. Firstly, phase change material (PCM) was incorporated into expanded perlite (EP) through a vacuum absorption method to obtain composite PCM; secondly, the composite PCM was immersed into the mixture of colloidal silica and organic acrylate, and then it was taken out and dried naturally. A series of experiments, including differential scanning calorimeter (DSC), scanning electron microscope (SEM), best matching test, and durability test, have been conducted to characterize and analyze the thermophysical property and reliability of PCMP. Additionally, the thermal performance of BESP was studied through a dynamic thermal property test. The results have showed that: (1) the surface film coating procedure can effectively solve the leakage problem of composite phase change material prepared by vacuum impregnation; (2) the optimum adsorption ratio for paraffin and EP was 52.5:47.5 in mass fraction, and the PCMP has good thermal properties, stability, and durability; and (3) in the process of dynamic thermal performance test, BESP have low temperature variation, significant temperature lagging, and large heat storage ability, which indicated the potential of BESP in the application of building energy efficiency.

  4. Raman mapping study of the pigments in the dancheong of Korean traditional buildings

    Science.gov (United States)

    Ji, Jeong-Eun; Han, Kiok; Nam, Jiyeon; Kim, Seung; Kang, Dai-Ill; Park, Min-Jung; Lee, Han-Hyoung; Yang, In-Sang

    2017-04-01

    Korea experienced a tragic loss of most of the Sungnyemun building in an arson attack in 2008. Few scientific records of the pigments originally used in the Korean national treasure exist, thus, the restoration of Sungnyemun was a serious failure. Because the Raman spectroscopic method has the advantage of analyzing the pigment phases in a simple, nondestructive, and noncontact way, it is becoming more important in scientific research on the colors present in cultural assets. In this study, Raman mapping measurements of the pigments in several "dancheong" - color decorations of the surfaces of the wood structure of Korean buildings - samples from Bongjeongsa Geukrakjeon and Sunglimsa Bogwangjeon are presented. The distribution of the pigments, which is difficult to observe with the naked eye, can be found in detail through a high-resolution Raman mapping image. A change of Raman spectrum due to the powderization of some pigments in the colored layer is also observed. The powderization of the pigments is considered to be due to weathering. Our Raman study will be helpful for the preservation and restoration of cultural heritage in general.

  5. Current methodology and methods in psychophysiological studies of creative thinking.

    Science.gov (United States)

    Bechtereva, N P; Danko, S G; Medvedev, S V

    2007-05-01

    Important points on methodology and detailed description of methods used in polymodal psychophysiological studies of human verbal creative thinking are presented. The psychophysiological studies were conducted with healthy volunteers during implementations of specially developed and adapted psychological tests aimed to bring the subjects into states of verbal creative thinking. Four different task sets ("story composition", "associative chains", "original definitions", "proverb sense flipping") were developed and applied. Positron emission tomography of regional cerebral blood flow (rCBF) and state-related quantitative electroencephalography (power and coherence evaluated) were used. The effectiveness of the methods is illustrated with figures.

  6. 基于当前节能标准公共建筑空调综合能效比分析%Based on the Current Efficiency Standards of Public Building Air Conditioning Comprehensive Efficiency Ratio Analysis

    Institute of Scientific and Technical Information of China (English)

    官玲俊; 谢泽渊; 江向阳

    2013-01-01

    Based on the national the currently executing public building energy efficiency standards , analysis and evaluation of the current energy -saving standard for central air conditioning system comprehensive Energy Efficiency ratio applicable scope , through the two practical engineering projects , evaluate comprehensive Energy Efficiency ra-tio of the temperature humidity independent control air conditioning system.Through the calculation analysis , this paper concludes that the current national standards for public buildings central air conditioning system minimum EER constraint value is 2.67 W/W, In this paper is beneficial for evaluation EER of new buildings air conditioning sys -tem and existing building air conditioning system energy saving operation provides a reliable technical data support .%基于国家当前执行的公共建筑节能标准,评价分析了当前节能标准对于中央空调系统综合能效比适用范围,通过计算分析得出:现行国家标准对于公共建筑中央空调系统最低能效比约束值为2.67 W/W,本文对于评价新建筑建筑空调系统能效比和既有建筑空调系统节能运营提供了可靠的技术数据支撑。

  7. Organ preconditioning: the past, current status, and related lung studies

    Institute of Scientific and Technical Information of China (English)

    LUH Shi-ping; YANG Pan-chyr

    2006-01-01

    Preconditioning (PC) has emerged as a powerful method for experimentally and clinically attenuating various types of organ injuries. In this paper related clinical and basic research issues on organ preconditioning issues were systemically reviewed.Since lung injuries, including ischemia-reperfusion and others, play important roles in many clinical results, including thromboembolism, trauma, thermal injury, hypovolemic and endotoxin shock, reimplantation response after organ transplantation, and many respiratory diseases in critical care. It is of interest to uncover methods, including the PCs, to protect the lung from the above injuries. However, related studies on pulmonary PC are relatively rare and still being developed, so we will review previous literature on experimental and clinical studies on pulmonary PC in the following paragraphs.

  8. Animal venom studies: Current benefits and future developments

    Institute of Scientific and Technical Information of China (English)

    Yuri; N; Utkin

    2015-01-01

    Poisonous organisms are represented in many taxa, including kingdom Animalia. During evolution, animals have developed special organs for production and injection of venoms. Animal venoms are complex mixtures, compositions of which depend on species producing venom. The most known and studied poisonous terrestrial animals are snakes, scorpions and spiders. Among marine animals, these are jellyfishes, anemones and cone snails. The toxic substances in the venom ofthese animals are mainly of protein and peptide origin. Recent studies have indicated that the single venom may contain up to several hundred different components producing diverse physiological effects. Bites or stings by certain poisonous species result in severe envenomations leading in some cases to death. This raises the problem of bite treatment. The most effective treatment so far is the application of antivenoms. To enhance the effectiveness of such treatments, the knowledge of venom composition is needed. On the other hand, venoms contain substances with unique biological properties, which can be used both in basic science and in clinical applications. The best example of toxin application in basic science is α-bungarotoxin the discovery of which made a big impact on the studies of nicotinic acetylcholine receptor. Today compositions of venom from many species have already been examined. Based on these data, one can conclude that venoms contain a large number of individual components belonging to a limited number of structural types. Often minor changes in the amino acid sequence give rise to new biological properties. Change in the living conditions of poisonous animals lead to alterations in the composition of venoms resulting in appearance of new toxins. At the same time introduction of new methods of proteomics and genomics lead to discoveries of new compounds, which may serve as research tools or as templates for the development of novel drugs. The application of these sensitive and

  9. Electrophysiological studies of malaria parasite-infected erythrocytes: Current status

    OpenAIRE

    Staines, Henry M.; Alkhalil, Abdulnaser; Allen, Richard J.; De Jonge, Hugo R.; Derbyshire, Elvira; Egée, Stéphane; Ginsburg, Hagai; Hill, David A.; Huber, Stephan M.; Kirk, Kiaran; Lang, Florian; Lisk, Godfrey; Oteng, Eugene; Pillai, Ajay D.; Rayavara, Kempaiah

    2007-01-01

    The altered permeability characteristics of erythrocytes infected with malaria parasites have been a source of interest for over 30 years. Recent electrophysiological studies have provided strong evidence that these changes reflect transmembrane transport through ion channels in the host erythrocyte plasma membrane. However, conflicting results and differing interpretations of the data have led to confusion in this field. In an effort to unravel these issues, the groups involved recently came...

  10. Electrophysiological studies of malaria parasite-infected erythrocytes: Current status

    Science.gov (United States)

    Staines, Henry M.; Alkhalil, Abdulnaser; Allen, Richard J.; De Jonge, Hugo R.; Derbyshire, Elvira; Egée, Stéphane; Ginsburg, Hagai; Hill, David A.; Huber, Stephan M.; Kirk, Kiaran; Lang, Florian; Lisk, Godfrey; Oteng, Eugene; Pillai, Ajay D.; Rayavara, Kempaiah; Rouhani, Sherin; Saliba, Kevin J.; Shen, Crystal; Solomon, Tsione; Thomas, Serge L. Y.; Verloo, Patrick; Desai, Sanjay A.

    2009-01-01

    The altered permeability characteristics of erythrocytes infected with malaria parasites have been a source of interest for over 30 years. Recent electrophysiological studies have provided strong evidence that these changes reflect transmembrane transport through ion channels in the host erythrocyte plasma membrane. However, conflicting results and differing interpretations of the data have led to confusion in this field. In an effort to unravel these issues, the groups involved recently came together for a week of discussion and experimentation. In this article, the various models for altered transport are reviewed, together with the areas of consensus in the field and those that require a better understanding. PMID:17292372

  11. The end of universality: new collectivities in current literary studies

    Directory of Open Access Journals (Sweden)

    Ronald Greene

    2015-11-01

    Full Text Available The author investigates how the literary studies reacted to the conceptual crises of universalism, especially after WWII. In order to replace a concept that refers to the ability of a literary work to transcend time and space, literary studies should focus on different and specific collectivities that, situated in time and space, read and interpret literary works. The author makes use of the concept of the obverse, in which two poems, from different historical moments and intellectual traditions are compared based on a common social-historical problem they are trying to solve.    O autor investiga sobre como os estudos literários reagiram à crise do conceito de universalismo, sobretudo depois da II Guerra Mundial. Para substituir um conceito que se refere à capacidade de uma obra literária transcender tempo e espaço, os estudos literários deveriam indagar sobre as diferentes coletividades específicas, no tempo e no espaço, que leem e dão significado à obra literária. Para isso, o autor se utiliza do conceito de “obverso”, em que dois poemas, de épocas e tradições intelectuais diferentes, são comparados a partir de um problema sócio-histórico que tentam resolver.      This work is licensed under a Creative Commons Attribution 3.0 License.

  12. Investigation on current status of clinical research team building of traditional Chinese medicine%中医临床研究团队建设现状研究

    Institute of Scientific and Technical Information of China (English)

    李屹; 汪瑾; 朱惠蓉

    2014-01-01

    This article introduced several concepts about clinical research team building of traditional Chinese medicine and raised current problems:personnel structure and member collaboration of the team were poor,staff major in medicine had imbalanced knowledge structure within medical area and the structure of team learning margin was unitary. Members in the team had not been influenced enough by the team. Some suggestions were put forward at last. Reasonable structure of the team should be established,which included selecting the appropriate academic leader and backbone and training qualified excellent team members. Effective methods should be used to form a sense of superiority and mission among team members. Through understanding the main problems and tasks in different stages of the team, team members could provide assistance and support more innovatively,lively,and modernly for the whole team.%阐述了中医临床研究团队建设相关的几个概念,揭示了其目前存在的问题:中医临床研究团队的配置与协作有硬伤,医学人才“偏科”现象严重,研究团队学缘结构单一;研究团队对成员个人的影响力尚未形成。提出对策建议:构建合理的研究团队结构,包括选择合适的学术带头人,适合的学术研究骨干和培养合格乃至优秀的团队成员;通过有效手段促使团队成员形成团队优越感与使命感,通过了解研究团队建设不同阶段的主要问题与任务,以更新颖、活泼、现代化方式行使医院人力资源部门职能,为中医临床研究团队的建设提供协助与保障。

  13. Building Sandcastles

    DEFF Research Database (Denmark)

    Jensen, Steffen Moltrup Ernø; Korsgaard, Steffen; Shumar, Wes

    of entrepreneurship education. Our theoretical and methodological approach builds on Actor-Network Theory. The empirical settings of our study consist of two entrepreneurship courses which differ in terms of temporal extension and physical setting. Data is collected using observation and interview techniques. Our...

  14. The Analysis Of Capillary Tube System For Office Buildings In Africa. A Case Study Of Nigerian And Namibian Climate

    Directory of Open Access Journals (Sweden)

    Sulaiman Muhammad kabir

    2015-08-01

    Full Text Available The change in climate and the rise in energy rates have become a necessary consideration in the construction industry which has made architects and engineers to arise with improved building design concepts. A focus on creating a comfortable indoor climate in office buildings ensures productive working conditions for the users and reduces global warming. Specific climatic design principles are often disregarded when designing to create a comfortable indoor climate. Sustainable design methods in buildings has been replicated from one zone to another zone without adjustments which results to buildings that do not provide adequate comfort. Capillary tube system is used to provide a comfortable indoor climate for office buildings making an interesting use of geothermal energy. This paper aims to explain its principle using geothermal energy and the effect of climate on the use of this system in office buildings in Africa. A case study of Lagos state lying on the coast of the Atlantic Ocean which is challenged with high rise in sea level as a result of global warming in Nigeria and Windhoek in Namibia is to be taken into consideration as the business hub of its country. These regions comprises of many office buildings to facilitate the countries trade internationally and locally.

  15. Experimental study on fire smoke movement in a multi-floor and multi-room building

    Institute of Scientific and Technical Information of China (English)

    ZHONG; Maohua; LI; Peide; LIU; Tiemin; WEI; Xing; LIAO; Gua

    2005-01-01

    Fire smoke movement of multi-floor and multi-room (MFMR) fire was studied at the model test building in State Key Laboratory of Fire Science (SKLFS). The ingredient, temperature, air pressure difference and air velocity of smoke were measured and analyzed. Meanwhile, the hazard of smoke ingredient to exposed occupants was analyzed based on the national standard, Occupational Exposure Limit for Hazardous Agents in the Workplace (GBZ2-2002). The experimental results showed that the maximum temperature difference in MFMR fire was located along the vertical height from the fire source. With the spreading and diffusion of smoke, the temperature of smoke layer would tend to be no difference. In the fire of woodpile and kerosene, the main smoke ingredients such as SO2, CO and CO2 would first exceed human's average physiological limit, while smoke ingredients such as NO and NO2 would come behind. Because of the higher fluctuation range and frequency of air pressure difference of smoke in multi-layer building fire, the fire smoke would spread around everywhere of the passageway and made the human evacuation more difficult.

  16. Pushing the Envelope: A Case Study of Building the First Manufactured Home Using Structural Insulated Panels

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Hadley, Donald L.; Sparkman, Ronald; Lubliner, Michael

    2002-06-01

    This paper for the ACEEE Summer Study describes construction of the first manufactured home ever produced from structural insulated panels. The home was built in July 2000 by Champion Enterprises at its Silverton, Oregon, plant. The house was completed on the assembly line in 9 days including a 300-mile road test. The paper examines the design and approval process leading to the project, the manufacturing process and its adjustment to SIPs, and the transportation and energy performance of the house after it was built. PNNL coordinated this project and conducted long-term monitoring on the house. The WSU Energy Program conducted building diagnostics testing once the house was occupied. PNNL’s and WSU’s involvement was funded by the U.S. DOE Building America Program. The Oregon Office of Energy conducted blower door and duct blaster tests. The completed home was estimated to reduce energy consumption by 50% and to have twice the structural strength required by HUD code for manufactured homes. The demonstration proved that the manufactured home production line could support SIPs production simultaneously with traditional construction and without major modifications, the line work in parallel with SIPs and traditional materials. The project revealed severl possibilities for further improving cost and time savings with SIPs construction, that might translate into increased capacity.

  17. Experimental Study on Tsunami Risk Reduction on Coastal Building Fronted by Sea Wall

    Directory of Open Access Journals (Sweden)

    Sadia Rahman

    2014-01-01

    Full Text Available This experimental study was conducted to idealize the efficacy of sea wall in controlling the tsunami forces on onshore structures. Different types of sea walls were placed in front of the building model. The tsunami forces and the wave heights were measured with and without the sea wall conditions. Types of sea wall, wall height, and wall positions were varied simultaneously to quantify the force reductions. Maximum of 41% forces was reduced by higher sea wall, positioned closer proximity to the model whereas this reduction was about 27% when the wall height was half of the high wall. Experimental investigations revealed that wall with adequate height and placed closer to the structures enables a satisfactory predictor of the force reduction on onshore structures. Another set of tests were performed with perforated wall placing near the building model. Less construction cost makes the provision of perforated sea wall interesting. The overall results showed that the efficacy of perforated wall is almost similar to solid wall. Hence, it can be efficiently used instead of solid wall. Moreover, overtopped water that is stuck behind the wall is readily gone back to the sea through perforations releasing additional forces on the nearby structures.

  18. Field study of thermal comfort in non-air-conditioned buildings in a tropical island climate.

    Science.gov (United States)

    Lu, Shilei; Pang, Bo; Qi, Yunfang; Fang, Kun

    2018-01-01

    The unique geographical location of Hainan makes its climate characteristics different from inland areas in China. The thermal comfort of Hainan also owes its uniqueness to its tropical island climate. In the past decades, there have been very few studies on thermal comfort of the residents in tropical island areas in China. A thermal environment test for different types of buildings in Hainan and a thermal comfort field investigation of 1944 subjects were conducted over a period of about two months. The results of the survey data show that a high humidity environment did not have a significant impact on human comfort. The neutral temperature for the residents in tropical island areas was 26.1 °C, and the acceptable temperature range of thermal comfort was from 23.1 °C to 29.1 °C. Residents living in tropical island areas showed higher heat resistance capacity, but lower cold tolerance than predicted. The neutral temperature for females (26.3 °C) was higher than for males (25.8 °C). Additionally, females were more sensitive to air temperature than males. The research conclusions can play a guiding role in the thermal environment design of green buildings in Hainan Province. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. GPR velocity and frequency analysis in industrial archaeology. Study of the EUETIB buildings (Barcelona, Sapin)

    Science.gov (United States)

    Pérez Gracia, V.; González Drigo, R.; Vendrell, D.

    2003-04-01

    The Ground-penetrating radar (GPR) analysis of some modernist buildings of the Technical Industrial School of Barcelona allow us to obtain valuable information of the underground constructions, corresponding to ancient structures of the preceding factory. The actual school is building on the modernist industrial complex. Many changes in the structure were carried out to adapt the structure to its actual use. The obtained GPR data was compared with the information, documents and photographies from the historical archives of the Diputación of Barcelona (Spain). To obtain accurate results and right interpretations, velocity analysis is performed in the different studied areas. The velocity values are used to convert accurately the two-way travel time into depth. The aim of those velocity estimations is obtain the minimum error in the final interpretations of the profiles. The velocity analysis is carried out using two different methods: calculating velocity using the reflection in anomalous bodies into the medium at a known depth, and calculating velocity from the hyperbolic events of the radargrams, caused by finite anomalies of the medium. The present tubes and conductions which are in use nowadays, have known depths. Then, velocity is obtained from the two-way travel time obtained for the reflected wave in that anomalous body. This method allow us to known velocities in areas where those elements are presented, which are mainly in the ground under the streets of the school. The reflection produced in unknown bodies which have finite dimensions, is obtained as an hyperbolic event. The averaged velocity of the medium over these bodies is calculated from the equation of the hyperbola. This method was used mainly where known elements were not presents in the ground. These areas are mainly the buildings of the school. Experimental velocities are understand as the averaged velocity of ray-path. The obtained values are applied to each area, to calculate depths of the

  20. Energy use in office buildings

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-10-01

    This is the report on Task IB, Familiarization with Additional Data Collection Plans of Annual Survey of BOMA Member and Non-Member Buildings in 20 Cities, of the Energy Use in Office Buildings project. The purpose of the work was to monitor and understand the efforts of the Building Owners and Managers Association International (BOMA) in gathering an energy-use-oriented data base. In order to obtain an improved data base encompassing a broad spectrum of office space and with information suitable for energy analysis in greater detail than is currently available, BOMA undertook a major data-collection effort. Based on a consideration of geographic area, climate, population, and availability of data, BOMA selected twenty cities for data collection. BOMA listed all of the major office space - buildings in excess of 40,000 square feet - in each of the cities. Tax-assessment records, local maps, Chamber of Commerce data, recent industrial-development programs, results of related studies, and local-realtor input were used in an effort to assemble a comprehensive office-building inventory. In order to verify the accuracy and completeness of the building lists, BOMA assembled an Ad-Hoc Review Committee in each city to review the assembled inventory of space. A questionnaire on office-building energy use and building characteristics was developed. In each city BOMA assembled a data collection team operating under the supervision of its regional affiliate to gather the data. For each city a random sample of buildings was selected, and data were gathered. Responses for over 1000 buildings were obtained.

  1. Direct and Indirect Impacts of Vegetation on Building Comfort: A Comparative Study of Lawns, Green Walls and Green Roofs

    Directory of Open Access Journals (Sweden)

    Laurent Malys

    2016-01-01

    Full Text Available Following development and validation of the SOLENE-microclimat tool, the underlying model was used to compare the impacts of various “greening strategies” on buildings’ summer energy consumption and indoor comfort. This study distinguishes between direct and indirect impacts by successively implementing the test strategies on both the studied building and surrounding ones; it also considers insulated vs. non-insulated buildings. Findings indicate that green walls have a direct effect on indoor comfort throughout the entire building, whereas the effect of green roofs is apparently primarily confined to the upper floor. Moreover, the indirect effect of a green wall is greater, mainly due to the drop in infrared emissions resulting from a lower surface temperature. It has also been proven that the indirect effects of green walls and surrounding lawns can help reduce the loads acting on a non-insulated building.

  2. Methodology to characterize a residential building stock using a bottom-up approach: a case study applied to Belgium

    Directory of Open Access Journals (Sweden)

    Samuel Gendebien

    2014-06-01

    Full Text Available In the last ten years, the development and implementation of measures to mitigate climate change have become of major importance. In Europe, the residential sector accounts for 27% of the final energy consumption [1], and therefore contributes significantly to CO2 emissions. Roadmaps towards energy-efficient buildings have been proposed [2]. In such a context, the detailed characterization of residential building stocks in terms of age, type of construction, insulation level, energy vector, and of evolution prospects appears to be a useful contribution to the assessment of the impact of implementation of energy policies. In this work, a methodology to develop a tree-structure characterizing a residential building stock is presented in the frame of a bottom-up approach that aims to model and simulate domestic energy use. The methodology is applied to the Belgian case for the current situation and up to 2030 horizon. The potential applications of the developed tool are outlined.

  3. Current studies on physiological functions and biological production of lactosucrose.

    Science.gov (United States)

    Mu, Wanmeng; Chen, Qiuming; Wang, Xiao; Zhang, Tao; Jiang, Bo

    2013-08-01

    Lactosucrose (O-β-D-galactopyranosyl-(1,4)-O-α-D-glucopyranosyl-(1,2)-β-D-fructofuranoside) is a trisaccharide formed from lactose and sucrose by enzymatic transglycosylation. This rare trisaccharide is a kind of indigestible carbohydrate, has good prebiotic effect, and promotes intestinal mineral absorption. It has been used as a functional ingredient in a range of food products which are approved as foods for specified health uses in Japan. Using lactose and sucrose as substrates, lactosucrose can be produced through transfructosylation by β-fructofuranosidase from Arthrobacter sp. K-1 or a range of levansucrases, or through transgalactosylation by β-galactosidase from Bacillus circulans. This article presented a review of recent studies on the physiological functions of lactosucrose and the biological production from lactose and sucrose by different enzymes.

  4. Descriptive currents in philosophy of religion for Hebrew Bible studies

    Directory of Open Access Journals (Sweden)

    Jacobus W. Gericke

    2011-03-01

    Full Text Available This article argued that the utilisation of philosophy of religion in the study of the Hebrew Bible is possible if we look beyond the stereotype of erroneously equating the auxiliary field with natural theology, apologetics or atheological criticism. Fruitful possibilities for interdisciplinary research are available in the form of descriptive varieties of philosophy of religion primarily concerned with understanding and the clarification of meaning rather than with the stereotypical tasks of propositional justification or critical evaluation. Three examples are discussed in the article: analytic traditions (Wittgensteinianism and ordinarylanguage philosophy, phenomenological perspectives involving reduction (bracketing and comparative philosophy of religion that works in tandem with the history of religion and comparative religion.

  5. Current state of epidemiological studies in Belarus about Chernobyl sufferers

    Energy Technology Data Exchange (ETDEWEB)

    Matsko, V.P. [Institute of Radiobiology, Academy Sciences of Belarus, Minsk (Belarus)

    1998-03-01

    The present paper is an analysis of the results of epidemiological studies in Belarus about the after-effects of the accident at the Chernobyl atomic power station (ChAPS), based on published data at scientific institutes, organs and institutions of Ministry of Health. In the last years the affected population showed thereby more significant - as compared with republican indices - growth of incidence in the majority of diseases (first of all: digestion, urogenital, nervous, endocrine systems, diseases of ear, throat, nose both among adults and among children). Aggravation of health state continues in the participants of liquidation of the ChAPS accident consequences and the evacuees from the alienation zone which have obtained considerable radiation load to organism (rise of incidence of diseases of endocrine, cardiovascular, nervous system etc.). Considerable growth of thyroid cancer incidence is registered in Belarus children and adolescents, especially in the Gomel and Brest regions. This is conditioned by dose commitments on thyroid gland due to iodine radionuclides in first period after the accident, incorrect iodine prophylaxy, and goitre endemic. The rise of hereditary pathology is registered too. An expressed increase of oncological diseases is observed therewith mainly in the Gomel region, especially in the districts with high level of radiocontamination and, consequently, significant radiation load. First of all, this relates to the growth of incidence of cancer of lungs, mammary gland, bladder. The analysis of epidemiological studies performed in Belarus after the ChAPS catastrophe and comparison of them with data obtained in the pre-Chernobyl period testify to the aggravation of health state of Belarus population. The specialists unambiguously recognize the direct influence of radioactive pollution in the environment on rise of thyroid pathologies, hereditary and congenial diseases, and cancers of different localizations. There is no unique opinion

  6. Modernisation of Public Buildings in Polish Towns and the Concept of Sustainable Building

    Directory of Open Access Journals (Sweden)

    Chodkowska-Miszczuk Justyna

    2014-12-01

    Full Text Available This article aims to identify the scale of energy efficiency improvements in public buildings in Polish towns as representative of sustainable building. The study area is investigated from the perspective of challenges arising from the current policy in the EU. The article indicates that, given the age of public buildings in Poland, the best way to implement the concept of sustainable building is to improve their present stock. The modernisation of public buildings is discussed in terms of project location, project value, sources of funding (including EU funds, and the use of buildings undergoing modernisation. According to the research findings, the implementation of the sustainable building concept is determined by both, exogenous factors (EU directives and domestic laws, etc. and endogenous ones (e.g. human resources and their quality

  7. Spectroscopic investigation of some building blocks of organic conductors: A comparative study

    Science.gov (United States)

    Mukherjee, V.; Yadav, T.

    2017-04-01

    Theoretical molecular structures and IR and Raman spectra of di and tetra methyl substituted tetrathiafulvalene and tetraselenafulvalene molecules have been studied. These molecules belong to the organic conductor family and are immensely used as building blocks of several organic conducting devices. The Hartree-Fock and density functional theory with exchange functional B3LYP have been employed for computational purpose. We have also performed normal coordinate analysis to scale the theoretical frequencies and to calculate potential energy distributions for the conspicuous assignments. The exciting frequency and temperature dependent Raman spectra have also presented. Optimization results reveal that the sulphur derivatives possess boat shape while selenium derivatives possess planner structures. Natural bond orbitals analysis has also been performed to study second order interaction between donors and acceptors and to compute molecular orbital occupancy and energy.

  8. Heat Diffusion in Klinker Facade: The Study Case of a Gio Ponti Building

    Directory of Open Access Journals (Sweden)

    N. Ludwig

    2012-01-01

    Full Text Available The researchers focus on the IRT procedure of heat diffusion in ceramic finishing materials of contemporary architecture. The aim of the research is the development of a method for the thermal characterization of clinkers, a very common ceramic finishing material of buildings. The first experimental phase was performed in laboratory on clinkers of different shapes, thickness, colors, and glazing surface. The researchers determined two characteristic parameters related to thickness and thermal conductivity, by the interpolation of the heating curve in function of time with an analytical curve (resulted from a particular solution of Fourier’s equation. This curve allows to obtain a parameter characteristic of the material of the specimens under investigation. At present time, the researchers have been studying the correlation between this parameter and the damage level in the specimens; they will be testing the model on real-scale study cases in the second experimental phase.

  9. The media and its involvement in building the culture of peace or violence. A reflectionfor peace studies.

    Directory of Open Access Journals (Sweden)

    María Gabriela Villar García

    2013-09-01

    Full Text Available The aim of this article is to meditate about the role that the mass media have and have had building the culture of peace and symbolic violence and/or culture from the perspective of peace studies. We highlight the concepts of culture of peace, violence, cultural and symbolic violence from a dialectical perspective. We look for a reflection that make the reader understand about building a culture of peace in a historical context framed by violence worldwide.

  10. Building with History

    DEFF Research Database (Denmark)

    Douglas-Jones, Rachel; Adams, Charlotte; Green, Adrian

    2014-01-01

    Drawing on interdisciplinary research focusing on Durham University estate, we describe how buildings constructed as part of an eighteenth century transition to a high carbon coal-based economy, are used and understood by their current inhabitants. Applied heritage research has tended to focus...... on the thermal and energetic properties of historic buildings, as distinct from their social meaning and use. A similar separation between the physi- cal building and its social use is inherent in methodologies such as energy audits that constitute key devices through which buildings are institution- ally...... was given to the existing possibilities afforded by historic buildings and their users...

  11. Current situation and analysis of the sustainable development of building%建筑可持续发展的现状及分析

    Institute of Scientific and Technical Information of China (English)

    陈茸; 韩宝安

    2013-01-01

    This article introduced sus-tainable development’s concept and the build-ing profession to sustainable development’s influence, and aimed at the present Chinese archi-tecture industry the present situation to propose own to building sustainable development some sug-gestions and the view.%本文介绍了可持续发展的概念及建筑行业对可持续发展的影响,并针对目前中国建筑业的现状提出了自己的对建筑可持续发展的一些建议和看法。

  12. On building socially responsible printing: an Organizational Communication Based Study Carried out on Higher Education Institution

    Directory of Open Access Journals (Sweden)

    Silvio Luiz Paula

    2014-04-01

    Full Text Available The main goal of this work is to analyze how organizational communication tools are used to manage printing, from both internal and external audiences, in what regards social responsibility in three Higher Education Institutions from Pernambuco (UFPE, FAFIRE, ASCES. In order to build our theoretical framework, we have used concepts from Printing Management, Corporate Social Responsibility, Stakeholder Theory, Organi-zational Communication, Organizational Culture and Organizational Structure. With respect to culture, a system of representations and shared values emerges, according to Fischer’s Model (1996. This system influences and is influenced by the organizational structure. We present an overview of Higher Education Institutions and their role on building society, according to the argument presented by Calderón (2010. In this work we discuss the creation of socially responsible printing, through communication with the interested audien-ces, as suggested by the model proposed by Mitchell, Agle and Wood (1997. The methodology chosen in this research work is a multiple case study. To this end, we have chosen three institutions, two located in Recife and one in Caruaru, cities in the state of Pernambuco. We have carried out a qualitative investigation. Thus, we have performed a field study with semi-structured interviews, document analysis, direct observations within the institutions in question, as well as indirect observation of photographs and videos. Amongst the results found, the actions performed were shown to be consistent with the management model and culture. The participants of the study have shown us that they are aware of the social role of Higher Education institutions, and have identified the students, professors, workers, students parents, associations, consumers and public service as the main stakeholders involved. Amongst the most commonly used strategies to build a socially responsible strategy, we can highlight

  13. Study on risk management for the implementation of energy efficient and renewable technologies in green office buildings

    Energy Technology Data Exchange (ETDEWEB)

    Mosly, I., E-mail: ibrahim.mosly@hotmail.com; Zhang, G., E-mail: kevin.Zhang@rmit.edu.au [RMIT University, Melbourne, Victoria (Australia). School of Civil, Environmental and Chemical Engineering

    2010-07-01

    Sustainability is becoming an important subject these days in many countries around the world. This is mainly due to increasing governmental and public awareness about reducing the impacts of climate change on our environment. Green buildings are able to reduce greenhouse gas emissions and consumption of natural resources. Reducing either water or energy consumption is achieved in green buildings with the aid of certain types of advanced technologies. This is done in order to help these buildings become more environmentally friendly. Unfortunately, these technologies are relatively new and may present a number of risks during various phases of their lifecycles, affecting different project stakeholders. This paper will focus on the risks of energy efficient and renewable technologies (EERTs), which are mainly implemented in green office buildings. These risks are divided into four categories: heating, ventilating and air conditioning (HVAC), lighting, solar, and wind. It will present a comprehensive review of a number of risks pertaining to the application of EERTs. Furthermore, it will emphasize the need to create a risk management framework for EERTs implemented in green office buildings due to the current lack of research carried out to investigate and treat these potential risks.

  14. Automatic Building Information Model Query Generation

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Yufei; Yu, Nan; Ming, Jiang; Lee, Sanghoon; DeGraw, Jason; Yen, John; Messner, John I.; Wu, Dinghao

    2015-12-01

    Energy efficient building design and construction calls for extensive collaboration between different subfields of the Architecture, Engineering and Construction (AEC) community. Performing building design and construction engineering raises challenges on data integration and software interoperability. Using Building Information Modeling (BIM) data hub to host and integrate building models is a promising solution to address those challenges, which can ease building design information management. However, the partial model query mechanism of current BIM data hub collaboration model has several limitations, which prevents designers and engineers to take advantage of BIM. To address this problem, we propose a general and effective approach to generate query code based on a Model View Definition (MVD). This approach is demonstrated through a software prototype called QueryGenerator. By demonstrating a case study using multi-zone air flow analysis, we show how our approach and tool can help domain experts to use BIM to drive building design with less labour and lower overhead cost.

  15. Building research administration applications for the academic health center: a case study.

    Science.gov (United States)

    Guard, J Roger; Brueggemann, Ralph F; Highsmith, Robert F; Marine, Stephen A; Riep, Josette R; Schick, Leslie C

    2005-11-01

    The academic health center information environment is saturated with information of varying quality and overwhelming quantity. The most significant challenge is transforming data and information into knowledge. The University of Cincinnati Medical Center's (UCMC) focus is to develop an information architecture comprising data structures, Web services, and user interfaces that enable individuals to manage the information overload so that they can create new knowledge. UCMC has accomplished much of what is reported in this article with the help of a four-year Integrated Advanced Information Management Systems (IAIMS) operation grant awarded by the National Library of Medicine in 2003. In the UCMC vision for knowledge management, individuals have reliable, secure access to information that is filtered, organized, and highly relevant for specific tasks and personal needs. Current applications and tool sets will evolve to become the next generation knowledge management applications or smart digital services. When smart digital services are implemented, silo applications will disappear. A major focus of UCMC's IAIMS grant is research administration. Testing and building out existing and new research administration applications and digital services is underway. The authors review UCMC's progress and results in developing a software architecture, tools, and services for research administration. Included are sections on the evolution to full integration, the impact of the work at UCMC to date, lessons learned during this research and development process, and future plans and needs.

  16. Building America Case Study: Assessment of a Hybrid Retrofit Gas Water Heater

    Energy Technology Data Exchange (ETDEWEB)

    2017-06-19

    This project completed a modeling evaluation of a hybrid gas water heater that combines a reduced capacity tankless unit with a downsized storage tank. This product would meet a significant market need by providing a higher efficiency gas water heater solution for retrofit applications while maintaining compatibility with the half-inch gas lines and standard B vents found in most homes. The TRNSYS simulation tool was used to model a base case 0.60 EF atmospheric gas storage water, a 0.82 EF non-condensing gas tankless water heater, an existing (high capacity) hybrid unit on the market, and an alternative hybrid unit with lower storage volume and reduced gas input requirements. Simulations were completed under a 'peak day' sizing scenario with 183 gpd hot water loads in a Minnesota winter climate case. Full-year simulations were then completed in three climates (ranging from Phoenix to Minneapolis) for three hot water load scenarios (36, 57, and 96 gpd). Model projections indicate that the alternative hybrid offers an average 4.5% efficiency improvement relative to the 0.60 EF gas storage unit across all scenarios modeled. The alternative hybrid water heater evaluated does show promise, but the current low cost of natural gas across much of the country and the relatively small incremental efficiency improvement poses challenges in initially building a market demand for the product.

  17. The Current Status of Usability Studies of Information Technologies in China: A Systematic Study

    OpenAIRE

    Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

    2014-01-01

    Objectives. To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. Methods. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Results. Six hundred forty-seven publications were selected for analysis. We found ...

  18. Technology Solutions Case Study: Design Guidance for Passive Vents in New Construction, Multifamily Buildings

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-02-12

    In an effort to improve indoor air quality in high-performance, new construction, multifamily buildings, dedicated sources of outdoor air are being implemented. Passive vents are being selected by some design teams over other strategies because of their lower first costs and operating costs. The U.S. Department of Energy’s Building America research team Consortium for Advanced Residential Buildings constructed eight steps, which outline the design and commissioning required for these passive vents to perform as intended.

  19. Modeling studies of the coastal/littoral current system off Southern Australia

    OpenAIRE

    Miller, Henry A.

    2006-01-01

    Both theoretical and numerical modeling studies of the current system off western and southern Australia are conducted to characterize the features of the current system, their temporal variability, and their impact on the sound speed structure. The theoretical study examines why boundary current separation occurs off Cape Leeuwin creating an area of enhanced eddy generation. It is shown that the beta effect, vortex stretching, and streamline curvature all act to decelerate the current a...

  20. Study of the Stiffening Systems For Seismic Loads in Multistoreyed Building

    Directory of Open Access Journals (Sweden)

    N.N.Shah

    2014-06-01

    Full Text Available Tall building developments have been rapidly increasing worldwide. This paper deals with the evolution of tall building’s structural systems and the technological driving force behind tall building developments. While most representative structural systems for tall buildings are discussed, the emphasis in paper is on the stiffening systems used in the structures for different heights. This paper describes seismic analysis of high-rise building using software STAADPro. with various lateral stiffness system. Some models are prepared using different stiffening systems and analysis is done.

  1. Experimental and Numerical Study of the Effects of Acoustic Sound Absorbers on the Cooling Performance of Thermally Active Building Systems

    DEFF Research Database (Denmark)

    Domínguez, L. Marcos; Kazanci, Ongun Berk; Rage, Nils

    2017-01-01

    Free-hanging horizontal and vertical sound absorbers are commonly used in buildings for room acoustic control; however, when these sound absorbers are used in combination with Thermally Active Building Systems, they will decrease the cooling performance of Thermally Active Building Systems...... plug-in for acoustic elements, which allows modeling free-hanging horizontal sound absorbers that partially cover the ceiling. With horizontal sound absorbers, the cooling performance of the Thermally Active Building System decreased by 11%, 23% and 36% for ceiling coverage ratios of 43%, 60% and 80...... and this will affect the thermal indoor environment in that space. Therefore, it is crucial to be able to quantify and model these effects in the design phase. This study quantifies experimentally the effects of horizontal and vertical free-hanging sound absorbers on the cooling performance of Thermally Active...

  2. Gas chromatographic study of degradation phenomena concerning building and cultural heritage materials.

    Science.gov (United States)

    Metaxa, E; Agelakopoulou, T; Bassiotis, I; Karagianni, Ch; Roubani-Kalantzopoulou, F

    2009-05-30

    Air pollution influences all aspects of social and economical life nowadays. In order to investigate the impact of air pollution on materials of works of art, the method of Reversed Flow-Inverse Gas Chromatography has been selected. The presence of various atmospheric pollutants is studied on marbles, oxides--building materials and samples of authentic statues from the Greek Archaeological Museums of Kavala and of Philippi. The method leads to the determination of several physicochemical quantities and the characterization of the heterogeneous surfaces of these solids. Moreover, the influence of a second pollutant (synergistic effect) is examined. The structure, the properties and the behavior of the materials are examined by X-Ray Diffraction, Scanning Electron Microscopy and Raman Spectroscopy. Therefore, the precise measurement of the above mentioned quantities form the scientific basis for elucidation of the mechanism of the whole phenomenon of the degradation, thus providing a scientific platform to conservation procedures.

  3. Experimental study of wind loads on unique buildings and structures in Russia

    Directory of Open Access Journals (Sweden)

    Poddaeva Olga

    2016-01-01

    Full Text Available Design and construction of unique buildings and structures (sports arenas, airport complexes, business centres, etc. from an engineering point of view is a very difficult task as in most cases these facilities have an original architectural form. Therefore, consideration of wind loads is an important part of the design. The paper presents the definition of wind load for two complex of airport. Researches was applied the combined calculation an experimental method. During the experimental study a wind tunnel architectural and construction type NRU MSUCE was used. Numerical simulations were performed using the software package ANSYS. The result of research on each object are integral aerodynamic loads on the object (coefficients Cx, Cy, Cmz and picture of the distribution of aerodynamic pressure coefficient Cp obtained in the numerical simulation. In conclusion, we discuss the possible formation of deposits of snow and recommendations to eliminate them from the roof of researched objects.

  4. Model Study of the Pressure Build-Up during Subcutaneous Injection

    DEFF Research Database (Denmark)

    Thomsen, Maria; Hernandez Garcia, Anier; Mathiesen, Joachim;

    2014-01-01

    of a porous medium. For equivalent injection forces we measure the change in the infusion rate between injections in air at atmospheric pressure and in tissue. From a best fit with our model, we then determine the flow permeability as well as the bulk modulus of the tissue, estimated to be of the order 10......In this study we estimate the subcutaneous tissue counter pressure during drug infusion from a series of injections of insulin in type 2 diabetic patients using a non-invasive method. We construct a model for the pressure evolution in subcutaneous tissue based on mass continuity and the flow laws......-11-10-10 m2 and 105 Pa, respectively. The permeability is in good agreement with reported values for adipose porcine tissue. We suggest our model as a general way to estimate the pressure build-up in tissue during subcutaneous injection....

  5. Building a Dignified Identity: An Ethnographic Case Study of LGBT Catholics.

    Science.gov (United States)

    Radojcic, Natasha

    2016-10-01

    This ethnographic case study offers insight into religiously devout sexual minorities and the reasons behind their continued participation in an anti-gay religious institution, the Roman Catholic Church. I demonstrate how members of Dignity, an organization for gay, lesbian, bisexual, and transgender (LGBT) Catholics, strategically use their identity as gay Catholics to initiate action, to build community, and to destigmatize other religious sexual minorities. Members leverage this unique identity to push for change and equality within the Church. At the same time, this identity also allows members to see their continued participation in the anti-gay Roman Catholic Church as activism, a positive and affirming identity, thereby alleviating potential conflict and contradiction between their sexuality and their spirituality as Roman Catholics.

  6. Model study of the pressure build-up during subcutaneous injection.

    Science.gov (United States)

    Thomsen, Maria; Hernandez-Garcia, Anier; Mathiesen, Joachim; Poulsen, Mette; Sørensen, Dan N; Tarnow, Lise; Feidenhans'l, Robert

    2014-01-01

    In this study we estimate the subcutaneous tissue counter pressure during drug infusion from a series of injections of insulin in type 2 diabetic patients using a non-invasive method. We construct a model for the pressure evolution in subcutaneous tissue based on mass continuity and the flow laws of a porous medium. For equivalent injection forces we measure the change in the infusion rate between injections in air at atmospheric pressure and in tissue. From a best fit with our model, we then determine the flow permeability as well as the bulk modulus of the tissue, estimated to be of the order 10-11-10-10 m2 and 105 Pa, respectively. The permeability is in good agreement with reported values for adipose porcine tissue. We suggest our model as a general way to estimate the pressure build-up in tissue during subcutaneous injection.

  7. Model study of the pressure build-up during subcutaneous injection

    DEFF Research Database (Denmark)

    Thomsen, Maria; Hernandez-Garcia, Anier; Mathiesen, Joachim

    2014-01-01

    In this study we estimate the subcutaneous tissue counter pressure during drug infusion from a series of injections of insulin in type 2 diabetic patients using a non-invasive method. We construct a model for the pressure evolution in subcutaneous tissue based on mass continuity and the flow laws...... of a porous medium. For equivalent injection forces we measure the change in the infusion rate between injections in air at atmospheric pressure and in tissue. From a best fit with our model, we then determine the flow permeability as well as the bulk modulus of the tissue, estimated to be of the order 10......-11-10-10 m2 and 105 Pa, respectively. The permeability is in good agreement with reported values for adipose porcine tissue. We suggest our model as a general way to estimate the pressure build-up in tissue during subcutaneous injection....

  8. Reveal or Conceal? An Explorative Study of Signaling Strategies to Build Legitimacy in Cleantech Ventures

    DEFF Research Database (Denmark)

    Bjørnåli, Ekaterina; Giones, Ferran; Billström, Anders

    The emergence of cleantech industry offers a unique context to explore and develop entrepreneurship theories. Cleantech ventures are important agents of environmental innovation, they exploit technological knowledge contribute to an increased use of energy from renewable sources or to a more......, compared to high-tech ventures operating in more established (legitimized) industries. Zimmermann and Zeitz (2002) suggested that achieving a legitimacy threshold is related to the emergence of a new venture. However, from the stage-based theory perspective, gaining legitimacy is associated with overcoming...... critical junctures (Vohora et al. 2004). Instead of a unique threshold, cleantech ventures might have to build and sustain legitimacy across different stages, overcoming legitimacy thresholds (Fisher et al. 2016). Our study examines how cleantech ventures pursue the process of signaling towards external...

  9. Model study of the pressure build-up during subcutaneous injection.

    Directory of Open Access Journals (Sweden)

    Maria Thomsen

    Full Text Available In this study we estimate the subcutaneous tissue counter pressure during drug infusion from a series of injections of insulin in type 2 diabetic patients using a non-invasive method. We construct a model for the pressure evolution in subcutaneous tissue based on mass continuity and the flow laws of a porous medium. For equivalent injection forces we measure the change in the infusion rate between injections in air at atmospheric pressure and in tissue. From a best fit with our model, we then determine the flow permeability as well as the bulk modulus of the tissue, estimated to be of the order 10-11-10-10 m2 and 105 Pa, respectively. The permeability is in good agreement with reported values for adipose porcine tissue. We suggest our model as a general way to estimate the pressure build-up in tissue during subcutaneous injection.

  10. Indoor Air Quality and Sick Building Syndrome Study at Two Selected Libraries in Johor Bahru, Malaysia

    Directory of Open Access Journals (Sweden)

    Z. Sulaiman

    2011-01-01

    Full Text Available This study was carried out to investigate the association between sick building syndrome (SBS and indoor air pollutants in two libraries. 101 workers in both libraries responded to the questionnaire, which was based on Malaysian Industry Code of Practice on Indoor Air Quality 2010 (MCPIAQ for the measurement of SBS occurrences. Measurements of indoor air quality were also performed according to the MCPIAQ methods. Higher prevalence of SBS recorded in Perpustakaan Sultanah Zanariah (PSZ, Universiti Teknologi Malaysia, compared to Perpustakaan Sultan Ismail (PSI (X2 = 38.81, p = 0.000, Johor Bahru City. Significantly higher levels of indoor air pollutants were detected in PSZ compare to PSI for CO, CO2, temperature, bacteria, fungi and Total Volatile Organic Compounds (TVOC, while PSI indicated higher level of relative humidity (RH. The levels of CO2, temperature, humidity, TVOC and bacteria counts were the possible major factors contributing to SBS complaints among the workers of both libraries.

  11. Building Materials

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Building Materials Sub-council of CCPIT is the other sub-council in construction field. CCPIT Building Materials Sub-council (CCPITBM), as well as CCOIC Build-ing Materials Chamber of Commerce, is au-thorized by CCPIT and state administration of building materials industry in 1992. CCPITBM is a sub-organization of CCPIT and CCOIC.

  12. Continuing the building's material cycle: A literature review and analysis of current systems theories in comparison with the theory of cradle to cradle

    NARCIS (Netherlands)

    Van Dijk, S.; Tenpierik, M.J.; Van den Dobbelsteen, A.A.J.F.

    2012-01-01

    Recently, the Cradle to Cradle (C2C) theory set ground in the Netherlands, propounding that environmental impact reduction can provide a positive economical impulse to stakeholders. The building industry has warmly received this approach and considers it to be a solution to the above-mentioned

  13. Building effectiveness communication ratios for improved building life cycle management

    Energy Technology Data Exchange (ETDEWEB)

    Morrissey, E.; Keane, M.; McCarthy, J. [Ireland National Univ., Cork (Ireland). IRUSE; O' Donnell, J. [Lawrence Berkely National Laboratory, Berkeley, CA (United States)]|[Ireland National Univ., Cork (Ireland). IRUSE

    2005-07-01

    The construction and operation of buildings consumes 35 per cent of total U.S. energy production. Although the application of building energy simulation models in early design stages can significantly increase performance throughout the building life cycle, energy simulation modeling has not been widely adopted by the design community. The complexity and length of time needed to prepare energy models are considered to be barriers, as well as the lack of energy appraisal tools capable of modeling a wide spectrum of hybrid heating, ventilation and air conditioning (HVAC) systems. A performance-based strategy using building effectiveness communication ratios stored in Building Information Models (BIM) was presented in this paper. The strategy aimed to link currently fragmented stages within the building life cycle. It was suggested that the ability to share and exchange information will reduce the amount of user time required for building simulation models. The proposed Building Energy Monitoring Analyzing and Communication (BEMAC) framework is an integrated environment that allows users to share data with other applications through an integrated data model. The data models allow each participant to employ tools specific to their needs without compromising or corrupting project data. Data values elicited from the model act as best-possible values. It was anticipated that by assigning spaces within the simulation model with proposed HVAC systems, reproductions of the energy use by these mechanical systems can contribute to overall energy data representation and analysis. Idealized Effectiveness Ratios and Performance Effectiveness Ratios were discussed in relation to a case study of the Glucksman Art Gallery at the National University of Ireland. Results indicated that the Idealized Effectiveness Ratio is applicable across the entire building life cycle, while the Performance Effectiveness Ratio allows facility managers to investigate the energy saving potential of the

  14. Laser heating: a minimally invasive technique for studying fire-generated heating in building stone

    Directory of Open Access Journals (Sweden)

    Ocaña, José Luis

    2008-06-01

    Full Text Available Due to the irreparable damage it can cause, fire is one of the major risks to buildings. Recent studies on the effects of fire tend to focus on micro-scale analysis, addressing questions such as micro-cracking or mineralogical or chemical changes that are particularly relevant to listed buildings.The fire simulation techniques employed to date (convection heating laboratory furnaces and real flame tests are subject to a series of limitations including non-repeatability, the lack of combustion by-products and, most importantly, the need to work with large samples. In this final context, techniques must be found that require only minimal sample sizes.This paper introduces laser irradiation as a technique suitable for simulating the “combustion” of building materials, since it mimics the physics of fire, is repeatable, yields combustion products and, most importantly, can be applied to small specimens. Indeed, as laser irradiation concentrates high amounts of energy in small areas, it can be used for micro-scale testing.El fuego es una de las amenazas más importantes para los edificios debido a la escala de pérdidas irreparables que genera. Los estudios sobre los efectos del fuego se han dirigido recientemente hacia escalas de observación más detalladas, que son más adecuadas para el estudio de muestras de edificios patrimoniales, como microfisuración y cambios mineralógicos y químicos.Las técnicas de simulación de fuegos empleadas hasta ahora (ensayos con hornos y llamas reales presentan varias limitaciones como, por ejemplo, la falta de repetibilidad, ausencia de sub-productos de combustión o, especialmente, el uso de muestras de gran tamaño. Por esta última razón, es importante encontrar técnicas en las que se pueda usar cantidades mínimas de muestra.Este artículo presenta la irradiación láser como una técnica adecuada para simular el “quemado” de materiales de construcción, ya que ofrece una física de

  15. An application of luminiscence dating to building archaeology: The study of ceramic building materials in early medieval churches in north-western France and south-eastern England

    Directory of Open Access Journals (Sweden)

    Blain, Sophie

    2010-12-01

    Full Text Available The research reported in this thesis concerns the re-evaluation of an archaeological assumption surrounding the origin of Ceramic Building Materials (CBM used from the 9th to the 11th century in religious buildings of north-western France and south-eastern England. Are the bricks used in the masonry structures Roman spolia or a novo productions? Amongst the dating methods that can contribute to building archaeology, it is the technique of stimulated luminescence applied to CBM that is the focus of this study. Results from thermoluminescence (TL and optically stimulated luminescence (OSL dating performed on 52 CBM samples from 11 churches showed that the practice of reusing Roman brick was commonplace in small parish churches, but also that brick-making was not a totally unknown skill of the early medieval craftsmen as it has long been supposed. Most importantly, by identifying that the building material is contemporary to the church, a defined chronology emerges resulting in a new and extremely useful reference point in the history of early medieval architecture.La investigación presentada en esta tesis se ocupa de la reevaluación de un supuesto arqueológico entorno al origen del material cerámico constructivo (CBM empleado entre los siglos IX y XI en los edificios religiosos del Noroeste de Francia y el Sudeste de Inglaterra. ¿Son los ladrillos empleados en las estructuras de fábrica spolia romana o producciones a novo? Entre los métodos de datación que pueden contribuir a la arqueología del edificio, la técnica de luminiscencia estimulada aplicada al CBM es el centro de este estudio. Los resultados de la termoluminiscencia (TL y de la luminiscencia estimulada ópticamente (OSL, aplicadas en 52 muestras de CBM tomadas en 11 iglesias, evidencian que la práctica de reutilizar ladrillos romanos era común en pequeñas iglesias parroquiales, pero que también la técnica de elaboración de ladrillos no era totalmente desconocida para los

  16. Parameter study on performance of building cooling by night-time ventilation

    DEFF Research Database (Denmark)

    Artmann, Nikolai; Manz, H.; Heiselberg, Per

    2008-01-01

    Especially for commercial buildings in moderate climates, night-time ventilation seems to be a simple and energy-efficient approach to improve thermal comfort in summer. However, due to uncertainties in the prediction of thermal comfort in buildings with night-time ventilation, architects...

  17. Relationship Building One Step at a Time: Case Studies of Successful Faculty-Librarian Partnerships

    Science.gov (United States)

    Díaz, José O.; Mandernach, Meris A.

    2017-01-01

    Building strong relationships between academic librarians and teaching faculty is paramount for promoting services and resources. While librarians face challenges ranging from new technologies to heightened expectations and fiscal difficulties, the key work remains in solid relationship building. Drawing on the experience of a group of subject…

  18. Study of wind forces on low-rise hip-roof building

    African Journals Online (AJOL)

    DR OKE

    3. 1University Polytechnic, Aligarth Muslim University, Aligarh - 202002, INDIA ... tests on the models of hip-roof building on a scale of 1:50 (prototype dimension 14 m x .... The computational domain, coordinate definition and boundary conditions for the present ... Figure 6 Mesh arrangement near the building in the plane.

  19. Sustainable Building and Energy-saving Options in Households. Case study : Meerstad

    NARCIS (Netherlands)

    Leduc, Wouter

    2006-01-01

    This report represents the results of a research focused on energy-saving and sustainable building. The applied measures are tested in a new-to-build city quarter in Groningen, Meer-stad. This project (Meerstad) aims to be innovative and a possible (futur

  20. Building America Case Study: Field Trial of an Aerosol-Based Enclosure Sealing Technology, Clovis, California

    Energy Technology Data Exchange (ETDEWEB)

    2016-05-01

    This report presents the results from several demonstrations of a new method for sealing building envelope air leaks using an aerosol sealing process developed by the Western Cooling Efficiency Center at UC Davis. The process involves pressurizing a building while applying an aerosol sealant to the interior. As air escapes through leaks in the building envelope, the aerosol particles are transported to the leaks where they collect and form a seal that blocks the leak. Standard blower door technology is used to facilitate the building pressurization, which allows the installer to track the sealing progress during the installation and automatically verify the final building tightness. Each aerosol envelope sealing installation was performed after drywall was installed and taped, and the process did not appear to interrupt the construction schedule or interfere with other trades working in the homes. The labor needed to physically seal bulk air leaks in typical construction will not be replaced by this technology. However, this technology is capable of bringing the air leakage of a building that was built with standard construction techniques and HERS-verified sealing down to levels that would meet DOE Zero Energy Ready Homes program requirements. When a developer is striving to meet a tighter envelope leakage specification, this technology could greatly reduce the cost to achieve that goal by providing a simple and relatively low cost method for reducing the air leakage of a building envelope with little to no change in their common building practices.

  1. Sustainable Building and Energy-saving Options in Households. Case study : Meerstad

    NARCIS (Netherlands)

    Leduc, Wouter

    2006-01-01

    This report represents the results of a research focused on energy-saving and sustainable building. The applied measures are tested in a new-to-build city quarter in Groningen, Meer-stad. This project (Meerstad) aims to be innovative and a possible (futur

  2. Study of Ambient and Indoor Air Quality in the Building Built on the Former Landfill

    Directory of Open Access Journals (Sweden)

    Anuar Ithnin

    2012-01-01

    Full Text Available Problem statement: The air quality study of PPR Taman Wahyu II, Selayang, Selangor was a residential project that was built on the former landfill site. The landfill site will produce landfill gases which can influence the air quality level in and outside the building. Approach: This air quality study also involving PPR Intan Baiduri, Batu Caves, Selangor as a control building. The air quality parameters chosen were physical, chemical and biological. Instruments used were HVS, Biogas Analyzer, Aeroqual, MultiRAE, ICP-MS, NMAM 7303 and gravimetric method. Gilian High Volume Air Sampler was used to measure heavy metal parameters that were conducted for 8 h, Personal Sampling Pump to measure total suspended particulates for 8 h, MultiRAE for H2S and CH4 gas, Aeroqual for CO2 gas, Multilog for CO gas and a Tedlar bag for O2 gas. For biological parameters, settle plate method was used and conducted for 20 min. Veloci CALC and wind probe were used to measure physical parameters. Results: In the ambient air, the mean concentration of Total Suspended Particulate (TSP, lead and cadmium were higher at an exposed location compared to the control with a reading of 0.325±0.29, 0.108±0.050 and 0.06±0.045 ng m-3 respectively. The reason was that the exposed location was a former landfill site and there were several co-founding factors. Mean concentration for chemical parameters were higher at the exposed location and all the chemical parameters were not exceeding the EPA Protocol Gas for Single Component. The mean concentration of oxygen is 20.95±0.005%, carbon dioxide 669.25±84.109 ppm and carbon monoxide 1.8±0.957 ppm. For biological parameters, mean for the colony total count also higher at the exposed location compared to control location where the mean for bacterial was 17.75±4.573cfu while for fungal, the mean is 8.0±2.828 cfu. Indoor air quality results showed that concentration means of CO2 was 877.8±59.40 ppm, CO was 5.0

  3. Evaluation of a Mixed Method Approach for Studying User Interaction with Novel Building Control Technology

    Directory of Open Access Journals (Sweden)

    Birgit Painter

    2016-03-01

    Full Text Available Energy-efficient building performance requires sophisticated control systems that are based on realistic occupant behaviour models. To provide robust data for the development of these models, research studies in real-world settings are needed. Yet, such studies are challenging and necessitate careful design in terms of data collection methods and procedures. This paper describes and critiques the design of a mixed methods approach for occupant behaviour research. It reviews the methodology developed for a longitudinal study in a real-world office environment where occupants’ experience with a novel facade technology (electrochromic glazing was investigated. The methodology integrates objective physical measurements, observational data and self-reported experience data. Using data from one day of the study, this paper illustrates how the different sources can be combined in order to derive an in-depth understanding of the interplay between external daylight conditions, characteristics of the facade technology, occupant interaction with the technology and the resulting occupant experience. It was found that whilst the individual methods may be affected by practical limitations, these can be partially offset by combining physical measurements and observations with self-reported data. The paper critically evaluates the individual techniques, as well as the benefits of their integration and makes recommendations for the design of future occupant behaviour studies in real-world settings.

  4. Building America Case Study: Advanced Extended Plate and Beam Wall System in a Cold-Climate House, Mount Joy, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    2016-01-01

    This report presents the design and evaluation of a innovative wall system. This highly insulated (high-R) light-frame wall system for use above grade in residential buildings is referred to as Extended Plate & Beam (EP&B). The EP&B design is the first of its kind to be featured in a new construction test house (NCTH) for the DOE Building America program. The EP&B wall design integrates standard building methods and common building products to construct a high-R wall that minimizes transition risks and costs to builders. The EP&B design combines optimized framing with integrated rigid foam sheathing to increase the wall system's R-value and reduce thermal bridging. The foam sheathing is installed between the wall studs and structural wood sheathing. The exterior wood sheathing is attached directly to a framing extension formed by extended top and bottom plates. The exterior wood sheathing can dry to the exterior and provides bracing, a clear drainage plane and flashing surface for window and door openings, and a nailing surface for siding attachment. With support of the DOE Building America program, Home Innovation Research Labs partnered with Lancaster County Career and Technology Center (LCCTC) to build a NCTH in Lancaster, PA to demonstrate the EP&B wall design in a cold climate (IECC climate zone 5A). The results of the study confirmed the benefits of the systems and the viability of its integration into the house construction process.

  5. Climate change and its role in forecasting energy demand in buildings: A case study of Douala City, Cameroon

    Indian Academy of Sciences (India)

    Modeste Kameni Nematchoua; Gh R Roshan; René Tchinda; T Nasrabadi; Paola Ricciardi

    2015-02-01

    The foremost role of a building is to assure the comfort of its occupants. The thermal comfort of a building depends on the outdoor climate and requires a demand in energy for heating and cooling. In this paper, demand of energy (heating/cooling) in the buildings is discussed in Douala, Cameroon. Daily data of the last 40 years coming from five weather stations of Cameroon have been studied. Some forecasts have been carried out with 14 GCM models, associated to three future climate scenarios B1, A2, and A1B. However, only INCM3 of General Circulation Model (GCM) and A2 scenario was used. Energy demand in buildings is valued by HDD (heating degree day) and CDD (cooling degree day) indices. Obtained results show that the temperature evolves more quickly in dry season than in rainy season in Douala. Climate rise indicates an increasing demand of energy in the buildings for cooling. Global Douala heating shows a definite effect on outdoor comfort. From 2045 to 2075, the demand of energy for cooling will be superior to 50%. The total demand in energy for heating in the buildings is estimated to be 67.882 kcal from 1970 to 2000 and will be around 67.774 kcal from 2013 to 2043.

  6. Validation of Point Clouds Segmentation Algorithms Through Their Application to Several Case Studies for Indoor Building Modelling

    Science.gov (United States)

    Macher, H.; Landes, T.; Grussenmeyer, P.

    2016-06-01

    Laser scanners are widely used for the modelling of existing buildings and particularly in the creation process of as-built BIM (Building Information Modelling). However, the generation of as-built BIM from point clouds involves mainly manual steps and it is consequently time consuming and error-prone. Along the path to automation, a three steps segmentation approach has been developed. This approach is composed of two phases: a segmentation into sub-spaces namely floors and rooms and a plane segmentation combined with the identification of building elements. In order to assess and validate the developed approach, different case studies are considered. Indeed, it is essential to apply algorithms to several datasets and not to develop algorithms with a unique dataset which could influence the development with its particularities. Indoor point clouds of different types of buildings will be used as input for the developed algorithms, going from an individual house of almost one hundred square meters to larger buildings of several thousand square meters. Datasets provide various space configurations and present numerous different occluding objects as for example desks, computer equipments, home furnishings and even wine barrels. For each dataset, the results will be illustrated. The analysis of the results will provide an insight into the transferability of the developed approach for the indoor modelling of several types of buildings.

  7. VALIDATION OF POINT CLOUDS SEGMENTATION ALGORITHMS THROUGH THEIR APPLICATION TO SEVERAL CASE STUDIES FOR INDOOR BUILDING MODELLING

    Directory of Open Access Journals (Sweden)

    H. Macher

    2016-06-01

    Full Text Available Laser scanners are widely used for the modelling of existing buildings and particularly in the creation process of as-built BIM (Building Information Modelling. However, the generation of as-built BIM from point clouds involves mainly manual steps and it is consequently time consuming and error-prone. Along the path to automation, a three steps segmentation approach has been developed. This approach is composed of two phases: a segmentation into sub-spaces namely floors and rooms and a plane segmentation combined with the identification of building elements. In order to assess and validate the developed approach, different case studies are considered. Indeed, it is essential to apply algorithms to several datasets and not to develop algorithms with a unique dataset which could influence the development with its particularities. Indoor point clouds of different types of buildings will be used as input for the developed algorithms, going from an individual house of almost one hundred square meters to larger buildings of several thousand square meters. Datasets provide various space configurations and present numerous different occluding objects as for example desks, computer equipments, home furnishings and even wine barrels. For each dataset, the results will be illustrated. The analysis of the results will provide an insight into the transferability of the developed approach for the indoor modelling of several types of buildings.

  8. Equity perceptions and marital satisfaction in former and current marriage : A study among the remarried

    NARCIS (Netherlands)

    Buunk, BP; Mutsaers, W

    1999-01-01

    A study among 290 remarried individuals examined equity perceptions in the former and the current marriage. The results showed that equity in the former and the current marriage were not related to each other. In general, respondents perceived much more inequity in the former than in the current mar

  9. Identification study on base isolation systems by full-scale buildings

    Energy Technology Data Exchange (ETDEWEB)

    Loh, C.; Lee, C. (National Taiwan University, Taipei (Taiwan, Province of China))

    1992-10-15

    In this paper, seismic response characteristics of two types of base-isolated buildings are investigated by using identification techniques. Equivalent linear system was first assumed in connection with the dynamic behavior of the structural system, then the nonlinear Bouc-Wen's model was assumed as second stage to model the isolation system and evaluate the hysteretic damping of the system. For structural identification, both ' model minimization method ' and ' extended Kalman filtering techniques ' were used. It was illustrated that the natural frequency of the isolation system of ' Law and Justice Center Building ' in California, the USA was designed greater than the natural frequency of the building while the natural frequency of the isolation system of the test building of Tohoku University was designed smaller than the natural frequency of the building. These results could be obtained by the system identification techniques. 20 refs., 12 figs., 2 tabs.

  10. Building America Case Study: Quantifying the Financial Benefits of Multifamily Retrofits, Chicago, Illinois

    Energy Technology Data Exchange (ETDEWEB)

    2016-04-01

    Increasing the adoption of energy efficient building practices will require the energy sector to increase their understanding of the way that retrofits affect multifamily financial performance as well as how those indicators are interpreted by the lending and appraisal industries. This project analyzed building, energy, and financial program data as well as other public and private data to examine the relationship between energy efficiency retrofits and financial performance on three levels: building, city, and community. The project goals were to increase the data and analysis in the growing body of multifamily financial benefits work as well provide a framework for other geographies to produce similar characterization. The goals are accomplished through three tasks: Task one: A pre- and post-retrofit analysis of thirteen Chicago multifamily buildings. Task two: A comparison of Chicago income and expenses to two national datasets. Task three: An in-depth look at multifamily market sales data and the subsequent impact of buildings that undergo retrofits.

  11. Comparative Policy Study for Green Buildings in U.S. and China

    Energy Technology Data Exchange (ETDEWEB)

    Khanna, Nina; Romankiewicz, John; Feng, Wei; Zhou, Nan; Ye, Qing

    2014-04-01

    Prominent barriers facing the U.S. green building industry include the fact that government bodies that supervise health, fire safety, land, and other public operations are slow to revise codes to accommodate green building (regulatory barrier). In China, the lack of a green building professional accreditation process similar to the Leadership in Energy and Environmental Design (LEED) AP process limits the green building workforce capacity development (informational barrier). The main policies highlighted in this report to tackle these barriers are 1) comprehensive codes and labeling plan (informational, institutional), 2) government-led targets and demonstrations (risk), 3) education and awareness programs (informational), 4) fiscal policy that supports green building investment (financial), and 5) integrated design promotion (institutional, financial).

  12. Recent clinical trials in idiopathic pulmonary fibrosis and the BUILD-1 study

    Directory of Open Access Journals (Sweden)

    K. K. Brown

    2008-12-01

    Full Text Available Idiopathic pulmonary fibrosis (IPF, the most common of the interstitial pneumonias, is a progressive, life-limiting disease for which there are no truly effective therapies. In patients with biopsy-confirmed IPF, median survival is still <3 yrs. Although potent immunosuppressive therapy has underpinned the treatment of IPF in recent years and remains the standard of care, there is little quality evidence to support the efficacy and safety of traditional therapeutic strategies. This has spurred the search for new treatments for IPF and has led to a series of clinical trials of new therapies, seven of which are reviewed herein. They include the Bosentan Use in Interstitial Lung Disease (BUILD-1 trial, the results of which are discussed in detail, the European Idiopathic Pulmonary Fibrosis International Group Exploring N-acetylcysteine 1 Annual (IFIGENIA trial, the interferon gamma (GIPF-001 trial and the INSPIRE trial, as well as trials of anticoagulant therapy, pirfenidone and etanercept. Treatment trials in IPF are hindered by difficulties in achieving a secure diagnosis of IPF and the lack of validated outcome measures that represent either improvement or progression of disease. These and other limitations are discussed in the present article, as well as how some of these problems might be addressed in future trials. Although few of the seven studies met their primary end-points, marginal trends either on primary end-points or statistically significant trends on exploratory end-points were a recurrent theme in most trials. In the BUILD-1 trial, for example, a trend in favour of bosentan was observed on time-to-disease progression or death.

  13. Potential and barrier study. Energy efficiency in Norwegian vocational buildings; Potensial- og barrierestudie. Energieffektivisering i norske yrkesbygg

    Energy Technology Data Exchange (ETDEWEB)

    Boehn, Trond Ivar; Palm, Linn Therese; Bakken, Line; Nossum, Aase; Jordell, Hanne

    2012-07-01

    On behalf of Enova SF, Multiconsult AS and Analyse og Strategi AS conducted an analysis to identify potential and barriers related to commercial buildings energy performance. The aim of this study was to determine what is the potential for energy efficiency for Norwegian vocational buildings that distinguishes between theoretical, technical, financial and real potential. Technical potential is the percentage of the theoretical potential that is technically feasible. Economic potential is the proportion of technical potential that is economically profitable to implement. Economic potential varies with the energy price. Build a small part of the total potential in 2020. In the calculation of the real potential is taken into account induced potential in terms of that, each year, a percentage actually implementing energy conservation measures (energy efficiency ratio 2%), a percentage rehabilitating / upgrading existing buildings (rehab rate 1.5%), and that a proportion of new buildings built better than regulatory requirements (rate 10%). In real potential for energy efficiency is the proportion of the economic potential that is not natural triggered but which is limited by various barriers. In real potential also varies with energy price. Respondents in our study is particularly concerned with the economic barriers, and least concerned the technical barriers. Attitudes and knowledge barriers are also very important. Lack of knowledge the effects and benefits of energy efficiency means that negative attitudes persist and that myths about the lack of profitability continues to exist. Many believe this is due to lack the knowledge and can be the cause of other types of barriers such as economic barriers. It has been analyzed which part of the real potential bounded by the barriers, and which type of institutions in society that can reduce these barriers with various categories of instrument. Main barriers for existing buildings practical barriers, economic barriers and

  14. Utilities/industries joint study on seismic isolation systems for LWRs. Pt. 2; Observed behaviors of base-isolated general buildings under real earthquakes

    Energy Technology Data Exchange (ETDEWEB)

    Matsumura, Takao; Sato, Shoji; Kato, Muneaki (Kansai Electric Power Co., Inc., Osaka (Japan))

    1991-06-01

    This paper describes the observed behavior of base-isolated buildings under real earthquake conditions. These buildings were constructed by five construction companies participating in the Joint Study on Seismic Isolation Systems for light-water reactors (LWRs). All the buildings are medium- or low-height buildings or reinforced-concrete structures with combinations of laminated rubber bearings or sliding bearings and various damping devices. (orig.).

  15. TRNFLOW: Integration of the COMIS air current simulation model in the TRNSYS building model TYPE 56; TRNFLOW: Integration des Luftstroemungsmodels COMIS in das TRNSYS Gebaeudemodel TYPE 56

    Energy Technology Data Exchange (ETDEWEB)

    Welfonder, T.; Hiller, M.; Holst, S. [TRANSSOLAR Energietechnik GmbH, Stuttgart (Germany); Weber, A.; Koschenz, M. [EMPA, Abt. Energiesysteme/Haustechnik, Duebendorf (Switzerland)

    2003-07-01

    In the thermal building model TRNSYS Type 56 the air flows between the zones and from the outside are defined by the user as input values. In natural ventilation systems these values depend on external wind pressures and the inside and outside temperatures. To meet these requirements there has to be a link to an airflow model. For these purposes in TRNFLOW the multizone air flow model COMIS has been integrated into Type 56. An internal solver algorithm optimized for this task iterates between the two models in every time step until the results are consistent. The capabilities of the existing user interface PREBID were enlarged to allow input of the necessary data for the air flow model. Therewith a user-friendly handling of the linked models will be guaranteed. With TRNFLOW the building simulation with TRNSYS has moved a major step forward. (orig.)

  16. Hygrothermal rehabilitation of public buildings.A case study on “Luceafărul” theatre in Jassy

    Directory of Open Access Journals (Sweden)

    Adrian IACOB

    2014-07-01

    Full Text Available In the selection of thermo-energetic rehabilitation solutions, there are certain restrictions determined especially by the imperative of preserving the architectural characteristics, a large proportion of these buildings falling under the categories of historic or cultural monuments of high architectural value. Under the second category comes “Luceafărul” Theatre from Jassy, a representative edifice for the area in which it is located. The requirement of conserving the current appearance of the façade areas veneered with travertine has imposed the placing of thermal insulation on the interior surface. Taking into account that interior insulation implies a higher risk of interstitial condensation, a non-steady state coupled heat and mass transfer analysis was performed, by using the WUFI program. The results of this study are plotted as annual variations of relative humidity in the structure of envelope elements, pointing out the layers that are susceptible of excessive values. By numerical simulation of heat transfer with ANSYS program, the discussion is extended with the influence that the insulation of two adjacent envelope elements has on the surface condesation risk, for the case in which at the thermal bridge obtained there a discontinuity exists in the insulation layer.

  17. Cost-Benefit Analysis for Energy Management in Public Buildings: Four Italian Case Studies

    Directory of Open Access Journals (Sweden)

    Davide Astiaso Garcia

    2016-07-01

    Full Text Available Improving energy efficiency in public buildings is one of the main challenges for a sustainable requalification of energy issues and a consequent reduction of greenhouse gas (GHG emissions. This paper aims to provide preliminary information about economic costs and energy consumption reductions (benefits of some considered interventions in existing public buildings. Methods include an analysis of some feasible interventions in four selected public buildings. Energy efficiency improvements have been assessed for each feasible intervention. The difference of the building global energy performance index (EPgl has been assessed before and after each intervention. Economic costs of each intervention have been estimated by averaging the amount demanded by different companies for the same intervention. Results obtained show economic costs and the EPgl percentage improvement for each intervention, highlighting and allowing for the comparison of energy consumption reduction and relative economic costs. The research results come from data gathered from four public buildings, and as such they could not be used to generically identify cost-beneficial energy efficiency interventions for every context or building type. However, the data reveals useful cost based considerations for selecting energy efficiency interventions in other public buildings.

  18. Perceptions of building professionals on sustainable development: A comparative study between Hong Kong and Shenyang

    Energy Technology Data Exchange (ETDEWEB)

    Lo, S.M.; Zhao, C.M.; Cheng, W.Y. [Department of Building and Construction, City University of Hong Kong (Hong Kong)

    2006-07-01

    It is logical to believe that the building professionals (architect, structural engineers, building services engineers, etc.) are the relevant persons that may influence the decision-making process on a real estate development process. Accordingly, the attitudes and perception of building professionals should have a significant influence on sustainable development. This article describes a survey concerning the perceptions of different building professionals, which include architects, construction engineers and building services engineers, on the environment, resource sustainability, and green consumerism in two major cities in China: Hong Kong and Shenyang. It is recognized that energy is central to sustainable development and in 2006/2007, the United Nation Commission on Sustainable Development will focus on energy issue. The discussion in this article will concentrate on the building professionals' perception on energy related issues. Nevertheless, the findings in respect of their awareness of the environment, resources sustainability and other related issues are also summarized. At global level, apart from the need to preserve historical buildings, the professionals in Shenyang feel that 'exhaustion of natural resources' is of major concern and energy preservation is significant. However, the Hong Kong professionals do not consider energy resource sustainability is of urgency. (author)

  19. RAPPORT-BUILDING THROUGH CALL IN TEACHING CHINESE AS A FOREIGN LANGUAGE: AN EXPLORATORY STUDY

    Directory of Open Access Journals (Sweden)

    Wenying Jiang

    2005-05-01

    Full Text Available Technological advances have brought about the ever-increasing utilisation of computer-assisted language learning (CALL media in the learning of a second language (L2. Computer-mediated communication, for example, provides a practical means for extending the learning of spoken language, a challenging process in tonal languages such as Chinese, beyond the realms of the classroom. In order to effectively improve spoken language competency, however, CALL applications must also reproduce the social interaction that lies at the heart of language learning and language use. This study draws on data obtained from the utilisation of CALL in the learning of L2 Chinese to explore whether this medium can be used to extend opportunities for rapport-building in language teaching beyond the face-to-face interaction of the classroom. Rapport's importance lies in its potential to enhance learning, motivate learners, and reduce learner anxiety. To date, CALL's potential in relation to this facet of social interaction remains a neglected area of research. The results of this exploratory study suggest that CALL may help foster learner-teacher rapport and that scaffolding, such as strategically composing rapport-fostering questions in sound-files, is conducive to this outcome. The study provides an instruction model for this application of CALL.

  20. Building America Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process - Queens, NY; Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-07-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis.
    CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

  1. Studi Kasus Kelayakan Penerapan Sistem Hybrid Building Applied Photovoltaics (BAPV-PLN pada Atap Gedung Politeknik Aceh

    Directory of Open Access Journals (Sweden)

    Rachmad Ikhsan

    2017-04-01

    Full Text Available With the undeveloped BAPV(Building Applied Photovoltaics at Office Building and Public Facilities, Caused the high price of solar modules and the lack the economic study on the use of solar modules that housed in the Banda Aceh region. Furthermore, the price of solar modules is expensive, so people think it will cost so much funds to building a BAPV’s system. These problems could be overcomed if the existing technical studies and economic studies of the application of the BAPV’s system. This study aims to assess the application of the BAPV’s system on institutions  building in terms of technical and economic value, in this case the building that is used as the study object is the Polytechnic Aceh’s Building. The method that used in the technical studies are theoretical calculations and simulations using helioscope software, while the methods used for economic studies is using the methods of cost-benefit analysis (cost benefit analysis. The method used to find the NPV (Net Present Value, PP (Payback Period, IRR (Internal Rate of Return, and BCR (Benefit Cost Ratio. If the average value of solar radiation reaching 4.79 kWh / m2 / day and the average daily energy requirement is 592 kWh, the energy generated from BAPV-PLN hybrid system on the roof of the object building will reach the amount of 237 MWh/year with the capacity charge controller used is 7490 A and the capacity of the battery used is 64.487 Ah. Panel tilt angle used is 25o and the type of panel used is Monocrystalline manifold. From the economic value will obtained NPV value of Rp. 20.022.106.937, PP during 5,2 years, IRR of 36% and 3,49 of BCR. Based on the evaluation results of the feasibility study, the project of hybrid BAPV-PLN’s system on the roof of the Polytechnic  Aceh’s  building can be realized, because its already meet the criteria of the feasibility study to make the systems get established in real term.

  2. Study on characteristics of double surface VOC emissions from dry flat-plate building materials

    Institute of Scientific and Technical Information of China (English)

    WANG Xinke; ZHANG Yinping; ZHAO Rongyi

    2006-01-01

    This paper sets up an analytic model of double surface emission of volatile organic compound (VOC) from dry, flat-plate building materials. Based on it, the influence of factors including air change rate, loading factor of materials in the room, mass diffusion coefficient, partition coefficient, convective mass transfer coefficient, thickness of materials, asymmetric convective flow and initial VOC concentration distribution in the building material on emission is discussed. The conditions for simplifying double surface emission into single surface emission are also discussed. The model is helpful to assess the double surface VOC emission from flat-plate building materials used in indoor furniture and space partition.

  3. Building unified geospatial data for land-change modeling—A case study in the area of Richmond, Virginia

    Science.gov (United States)

    Donato, David I.; Shapiro, Jason L.

    2016-12-13

    An effort to build a unified collection of geospatial data for use in land-change modeling (LCM) led to new insights into the requirements and challenges of building an LCM data infrastructure. A case study of data compilation and unification for the Richmond, Va., Metropolitan Statistical Area (MSA) delineated the problems of combining and unifying heterogeneous data from many independent localities such as counties and cities. The study also produced conclusions and recommendations for use by the national LCM community, emphasizing the critical need for simple, practical data standards and conventions for use by localities. This report contributes an uncopyrighted core glossary and a much needed operational definition of data unification.

  4. A Study on the Jejungwon Hospital Building in Jaedong and Gurigae, and Uses of the Hospital after its Relocation.

    Science.gov (United States)

    Lee, Yeonkyung

    2016-12-01

    Jejungwon hospital, the first modern healthcare facility to be built in Korea, was built at Jaedong in 1885 and moved to Gurigae in 1887. Finally, it was moved to Dodong, outside the Namdaemun Gate, and its name was changed to Severance Hospital. The Jaedong Jejungwon hospital was located at a former house of HONG Youngsik, and it was expanded by renovating existing buildings and constructing new buildings in 2 years. The Gurigae Jejungwon hospital, which was located near Myeongdong Cathedral, was bigger than the Jaedong Jejungwon one and even provided residence to doctors. Jejungwon hospital was a good example of the healthcare facilities that were available in early modern Korea; however, due to a lack of historical materials, it is not easy to analyze the buildings of Jejungwon hospital. Recently, several architectural drawings made by Japanese and photographs taken by foreigners in the early 20th century were discovered, which help us to understand the buildings of the Jejungwon hospitals in Jaedong and Gurigae. This study analyzes the locations and layouts of the buildings of Jejungwon hospital and, furthermore, traces the history of Jejungwon hospital following its relocation. The Jaedong Jejungwon hospital was located at 35 Jaedong, as already known. By analyzing the architectural drawing of Kyeongseong Women's High-School Dormitory, the exact size of the existing building of Jaedong Jejungwon was calculated as 12m × 3.9m. Since the relocation of Jejungwon hospital to Gurigae in 1887, the remnants of Jejungwon buildings were used as Gwangjewon (1900-1907); a vaccine-manufacturing plant (1907-1910); and, finally, the dormitory of Kyeongseong Women's High School(1910s-1950s). The Gurigae Jejungwon hospital was assumed to be located at 193, 2nd street of Koganecho () and 4, 1st street of Meijicho (). In particular, the residence of Avison, which was built after 1894, was located at 4, 1st Street of Meijicho, the place with the highest elevation compared to

  5. A study of the impact of environmental loads that penetrate a passive skylight roofing system in Malaysian buildings

    Directory of Open Access Journals (Sweden)

    Karam M. Al-Obaidi

    2014-06-01

    Full Text Available A passive skylight system is a significant building design element that provides an ideal condition for interior spaces. However, the use of this system is limited to specific climatic regions because of its considerable effect on the indoor environment. Malaysia is a tropical country that has favorable natural benefits, such as solar geometry and natural light, which can brighten building interiors throughout the year. However, harnessing this benefit affects spaces, especially those in single-story buildings, because of excessive natural loads. This study reviews a concept to understand the passive behavior of solar radiation in the form of light and heat that falls on, interacts with, and is emitted from a skylight system in a single-story building. The study method is theoretically based on descriptive analysis to assess design requirements. The review shows that designs grounded on the physical aspects of climate (influenced variables, materials (design variables, and human comfort (affected variables in one process (ESI can develop the architectural way of thinking rather than estimate the condition based on a limited perspective. This assumption indicates that the adoption of this concept in the preliminary design stage will enable designers to balance the building environment effectively.

  6. Optimal and Sustainable Plant Refurbishment in Historical Buildings: A Study of an Ancient Monastery Converted into a Showroom in Florence

    Directory of Open Access Journals (Sweden)

    Carla Balocco

    2013-04-01

    Full Text Available The aim of this research is to study the possibility and sustainability of retrofit and refurbishment design solutions on historical buildings converted to different uses and often clashing with their original purpose and architectural features. The building studied is an ancient monastery located in the historical center of Florence (Italy. Today the original cloister is covered over by a single glazed pitched roof and used as a fashion showroom. Our proposed solution concerns a reversible and sustainable plant design integrated with an active transparent building casing. The existing glazed pitched roof was reconsidered and re-designed as part of the existing heating, ventilation and air conditioning (HVAC plant system, based on the functioning of an active thermal buffer to control the high heat flow rates and external thermal loads due to solar radiation. Hourly whole building energy analysis was carried out to check the effectiveness and energy sustainability of our proposed solution. Results obtained showed, from the historical-architectural, energy and environmental points of view, its sustainability due to the building-plant system integration and interaction with its location, the external climatic conditions and defined expected uses, in particular with reference to indoor thermal comfort.

  7. SIA model for buildings: energy-efficiency path for commercial and residential buildings. Preliminary study on the Swiss model for buildings - Basics for the revision of the 'SIA energy-efficiency path' - Final report; Gebaeudeparkmodell 'SIA Effizienzpfad Energie', Dienstleistungs- und Wohngebaeude. Vorstudie zum Gebaeudeparkmodell Schweiz - Grundlagen zur Ueberarbeitung des SIA Effizienzpfades Energie - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Heeren, N.; Gabathuler, M.; Wallbaum, H. [Institut fuer Bauplanung und Baubetrieb, Eidgenoessische Technische Hochschule Zuerich (ETHZ), Zuerich (Switzerland); Jakob, M.; Martius, M.; Gross, N. [TEP Energy GmbH, Technology Economics Policy - Research and Advice, Zuerich (Switzerland)

    2009-10-15

    The aim of the project was to provide a basis for the revision of the so-called 'Efficiency Path' of the Swiss Association of Engineers and Architects (SIA) in the context of the goals of the 2000-Watt-Society. Particularly, the objective is to find the conditions in which the specific goals of the 2000-Watt-Society for residential, school and office buildings could be reached. Considered indicators are the per capita primary energy use in terms of average power and the greenhouse gas emissions. A bottom-up model was developed to estimate final and primary energy demand of the mentioned building types, broken down by different types of energy utilisation. Assumptions were made regarding the most important physical drivers as well as for regarding energy efficiency parameters of new buildings, building retrofits, building technologies and other energy applications in the residential, school and office buildings. Two basic scenarios were developed: an ambitious efficiency scenario was compared to a reference scenario which included current and foreseeable energy policy elements. Regarding electricity supply three scenario-variants of the so-called Swiss Energy Perspectives of the Swiss Federal Office of Energy (SFOE) were used: variant I b 'business-as-usual - nuclear and central fossil plants', IV a: Path to the 2000-Watt-Society - nuclear' and, IV e 'Path to the 2000-Watt-Society - renewable energies'. With this respect it was found that in the case of the efficiency scenario the influence of the electricity generation mix is relatively small. This finding is explained by the fact that hydro power (which is held more or less at the current level) has a large share in the power supply mix in the case of the efficiency scenario with moderate electricity demand and that hydro power is efficient in terms of primary energy and has considerably low greenhouse gas emissions. The results of the study show that with the underlying

  8. Studies on use of Copper Slag as Replacement Material for River Sand in Building Constructions

    Science.gov (United States)

    Madheswaran, C. K.; Ambily, P. S.; Dattatreya, J. K.; Rajamane, N. P.

    2014-09-01

    This work focuses on the use of copper slag, as a partial replacement of sand for use in cement concrete and building construction. Cement mortar mixtures prepared with fine aggregate made up of different proportions of copper slag and sand were tested for use as masonry mortars and plastering. Three masonry wall panels of dimensions 1 × 1 m were plastered. The studies showed that although copper slag based mortar is suitable for plastering, with the increase in copper slag content, the wastage due to material rebounding from the plastered surfaces increases. It is therefore suggested that the copper slag can be used for plastering of floorings and horizontal up to 50 % by mass of the fine aggregate, and for vertical surfaces, such as, brick/block walls it can be used up to 25 %. In this study on concrete mixtures were prepared with two water cement ratios and different proportions of copper slag ranging from 0 % (for the control mix) to 100 % of fine aggregate. The Concrete mixes were evaluated for workability, density, and compressive strength.

  9. Radon measurement studies in workplace buildings of the Rawalpindi region and Islamabad Capital area, Pakistan

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, S.U.; Anwar, J. [Department of Physics, COMSATS Institute of Information Technology, Islamabad (Pakistan); Rafique, M. [Department of Physics, University of Azad Jammu and Kashmir, Muzaffarabad, Azad Kashmir (Pakistan); Matiullah [Physics Division, Pakistan Institute of Nuclear Science and Technology (PINSTECH), Islamabad (Pakistan)

    2010-02-15

    A survey concerning measurement of the indoor radon levels has been carried out in 105 workplaces of the Rawalpindi region and Islamabad Capital Territory using CR-39 based radon detectors. The main objective of this study was to assess the health hazard due to the indoor radon. CR-39 based NRPB type detectors were installed in offices/rooms located on first floors, ground floors and basements and were exposed to indoor radon for six months. The measured indoor radon concentration in the buildings surveyed ranged from 12 {+-} 5 to 293 {+-} 19 Bq m{sup -3} with an overall mean value of 64 {+-} 32 Bq m{sup -3}. The highest mean radon concentration (113 {+-} 48 Bq m{sup -3}) was observed in the offices located in basements of the Rawalpindi city. The overall average annual effective dose in the studied workplaces was estimated to be 0.61 {+-} 0.30 mSv. The mean annual effective doses in basements, ground floor and first floor were found to be 0.87 {+-} 0.34 mSv, 0.55 {+-} 0.28 mSv, and 0.47 {+-} 0.29 mSv, respectively. These values are less than the action level recommended by International Commission on Radiological Protection. (author)

  10. A fast alignment method for breast MRI follow-up studies using automated breast segmentation and current-prior registration

    Science.gov (United States)

    Wang, Lei; Strehlow, Jan; Rühaak, Jan; Weiler, Florian; Diez, Yago; Gubern-Merida, Albert; Diekmann, Susanne; Laue, Hendrik; Hahn, Horst K.

    2015-03-01

    In breast cancer screening for high-risk women, follow-up magnetic resonance images (MRI) are acquired with a time interval ranging from several months up to a few years. Prior MRI studies may provide additional clinical value when examining the current one and thus have the potential to increase sensitivity and specificity of screening. To build a spatial correlation between suspicious findings in both current and prior studies, a reliable alignment method between follow-up studies is desirable. However, long time interval, different scanners and imaging protocols, and varying breast compression can result in a large deformation, which challenges the registration process. In this work, we present a fast and robust spatial alignment framework, which combines automated breast segmentation and current-prior registration techniques in a multi-level fashion. First, fully automatic breast segmentation is applied to extract the breast masks that are used to obtain an initial affine transform. Then, a non-rigid registration algorithm using normalized gradient fields as similarity measure together with curvature regularization is applied. A total of 29 subjects and 58 breast MR images were collected for performance assessment. To evaluate the global registration accuracy, the volume overlap and boundary surface distance metrics are calculated, resulting in an average Dice Similarity Coefficient (DSC) of 0.96 and root mean square distance (RMSD) of 1.64 mm. In addition, to measure local registration accuracy, for each subject a radiologist annotated 10 pairs of markers in the current and prior studies representing corresponding anatomical locations. The average distance error of marker pairs dropped from 67.37 mm to 10.86 mm after applying registration.

  11. Building COPD care on shaky ground: a mixed methods study from Swedish primary care professional perspective.

    Science.gov (United States)

    Lundell, Sara; Tistad, Malin; Rehn, Börje; Wiklund, Maria; Holmner, Åsa; Wadell, Karin

    2017-07-10

    Chronic obstructive pulmonary disease (COPD) is a public health problem. Interprofessional collaboration and health promotion interventions such as exercise training, education, and behaviour change are cost effective, have a good effect on health status, and are recommended in COPD treatment guidelines. There is a gap between the guidelines and the healthcare available to people with COPD. The aim of this study was to increase the understanding of what shapes the provision of primary care services to people with COPD and what healthcare is offered to them from the perspective of healthcare professionals and managers. The study was conducted in primary care in a Swedish county council during January to June 2015. A qualitatively driven mixed methods design was applied. Qualitative and quantitative findings were merged into a joint analysis. Interviews for the qualitative component were performed with healthcare professionals (n = 14) from two primary care centres and analysed with qualitative content analysis. Two questionnaires were used for the quantitative component; one was answered by senior managers or COPD nurses at primary care centres (n = 26) in the county council and the other was answered by healthcare professionals (n = 18) at two primary care centres. The questionnaire data were analysed with descriptive statistics. The analysis gave rise to the overarching theme building COPD care on shaky ground. This represents professionals driven to build a supportive COPD care on 'shaky' organisational ground in a fragmented and non-compliant healthcare organisation. The shaky ground is further represented by uninformed patients with a complex disease, which is surrounded with shame. The professionals are autonomous and pragmatic, used to taking responsibility for their work, and with limited involvement of the management. They wish to provide high quality COPD care with interprofessional collaboration, but they lack competence and are hindered by

  12. Current Status of the Build Systems of Packages in Different Distributions of GNU/Linux Estado actual de los sistemas de construcción de paquetes en diferentes distribuciones de GNU/Linux

    OpenAIRE

    Dariem Pérez Herrera; Sonia Guerrero Lambert; Yusleydi Fernández del Monte; Miguel Albalat Águila; Jorge Luis Machín Castillo; Héctor Pérez Baranda; Ricardo Quevedo Mejías

    2012-01-01

    In this paper, the various systems and tools for building package repositories used by the different distributions of GNU/Linux are analyzed, with the aim of studying features that may be useful given the need for an own system. This will divide these into two groups: the tools for the construction of individual packages and the build systems of package repositories. The first group was studied because they are part of the components of the second group. The tools an...

  13. Study of Strength of RC Shear Wall at Different Location on Multi-Storied Residential Building

    Directory of Open Access Journals (Sweden)

    Syed Ehtesham Ali

    2014-09-01

    Full Text Available Shear wall systems are one of the most commonly used lateral load resisting systems in high-rise buildings. Shear walls have very high in plane stiffness and strength, which can be used to simultaneously resist large horizontal loads and support gravity loads, making them quite advantageous in many structural engineering applications. There are lots of literatures available to design and analyze the shear wall. However, the decision about the location of shear wall in multi-storey building is not much discussed in any literatures. In this paper, therefore, main focus is to determine the solution for shear wall location in multi-storey building. A RCC building of six storey placed in HYDERABAD subjected to earthquake loading in zone-II is considered. An earthquake load is calculated by seismic coefficient method using IS 1893 (PART–I:2002. These analyses were performed using ETABS.

  14. Condition and Defect Surveys on Penang Heritage Centre: A Case Study on Georgetown World Heritage Building

    Directory of Open Access Journals (Sweden)

    Masyatul Husna Othman

    2012-09-01

    Full Text Available Condition and defect surveys are process which appropriate experts investigates the existing condition of a building, carry out necessary tasks, evaluate the data collected, make the recommendations professionally about the remedial and predict performance of the building. This paper focuses on condition and defect surveys on Penang Heritage Centre, Malaysia. This building is listed as one of the buildings under Georgetown World Heritage Site. Penang Heritage Trust is a heritage shop house designed with Southern Chinese Eclectic Style. It has Chinese, European and Indian style influence. Chinese style influence on the carved timber door, air vents, gable and end, air-well and etc. While, European and Indian influences can be seen from the design of the louvered shutters and U/V-shaped terracotta roof tiles.

  15. Exploring mentorship as a strategy to build capacity for knowledge translation research and practice: protocol for a qualitative study

    Directory of Open Access Journals (Sweden)

    Gagliardi Anna R

    2009-08-01

    Full Text Available Abstract Background Research funders, educators, investigators and decision makers worldwide have identified the need to improve the quality of health care by building capacity for knowledge translation (KT research and practice. Peer-based mentorship represents a vehicle to foster KT capacity. The purpose of this exploratory study is to identify mentoring models that could be used to build KT capacity, consult with putative mentee stakeholders to understand their KT mentorship needs and preferences, and generate recommendations for the content and format of KT mentorship strategies or programs, and how they could be tested through future research. Methods A conceptual framework was derived based on mentoring goals, processes and outcomes identified in the management and social sciences literature, and our research on barriers and facilitators of academic mentorship. These concepts will inform data collection and analysis. To identify useful models by which to design, implement and evaluate KT mentorship, we will review the social sciences, management, and nursing literature from 1990 to current, browse tables of contents of relevant journals, and scan the references of all eligible studies. Eligibility screening and data extraction will be performed independently by two investigators. Semi-structured interviews will be used to collect information about KT needs, views on mentorship as a knowledge sharing strategy, preferred KT mentoring program elements, and perceived barriers from clinician health services researchers representing different disciplines. Qualitative analysis of transcripts will be performed independently by two investigators, who will meet to compare findings and resolve differences through discussion. Data will be shared and discussed with the research team, and their feedback incorporated into final reports. Discussion These findings could be used by universities, research institutes, funding agencies, and professional

  16. Low-cost and no-cost practice to achieve energy efficiency of government office buildings: A case study in federal territory of Malaysia

    Science.gov (United States)

    Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Ibrahim, Amlus

    2016-08-01

    This paper presents the findings of a case study to achieve energy-efficient performance of conventional office buildings in Malaysia. Two multi-storey office buildings in Federal Territory of Malaysia have been selected. The aim is to study building energy saving potential then to highlight the appropriate measures that can be implemented. Data was collected using benchmarking method by comparing the measured consumption to other similar office buildings and a series of preliminary audit which involves interviews, a brief review of utility and operating data as well as a walkthrough in the buildings. Additionally, in order to get a better understanding of major energy consumption in the selected buildings, general audit have been conducted to collect more detailed information about building operation. In the end, this study emphasized low-cost and no-cost practice to achieve energy efficiency with significant results in some cases.

  17. Field Study on the Energy Consumption of School Buildings in Luxembourg

    OpenAIRE

    Thewes, Andreas; Maas, Stefan; Scholzen, Frank; Waldmann, Danièle; Zürbes, Arno

    2014-01-01

    Buildings account for 40 % of total energy consumption and 35 % of the total CO2 emitted in the EU. In consequence, there is an enormous energy saving potential and the European Union requires from all EU member states to save energy in this sector. Hence, reducing the energy consumption of buildings represents an essential component of environmental protection efforts. Furthermore, the new European directive 2010/31/EU requires that the member states tighten national standards and draw up na...

  18. A Case Study of Wind Resource Assessment on a High-Rise Building

    Science.gov (United States)

    Padrick, S.; Clements, C. B.; Seto, D.

    2009-12-01

    There has been a recent surge in the development of small-scale wind turbines for wind energy on buildings in urban areas. This requires knowledge of wind characteristics on specific buildings. A short measurement campaign was conducted during a three-month period on the Department of Meteorology’s rooftop observatory located at San José State University, in downtown San Jose, CA to determine the potential for use of small-scale turbines on campus. Cup and prop-vane anemometers were configured around the roof at each corner of the building and in the center of the roof at heights of 1-1.5 m above the roof. A single prop-vane anemometer was also located on a tower at 10 m above the roof surface. This arrangement was used to determine areas of reduced flow in order to measure the potential placement of small turbines on roofs of similar dimensions. In addition to the cup anemometers, two 3-d sonic anemometers were placed on the upwind edge of the building to determine the effects of turbulence on the flow over the roof. Preliminary results indicate that winds at each corner of the building did not differ much, but were on average about 1-2 m s-1 less in magnitude than winds at 10 m above the roof surface. This paper will present results on the turbulence statistics obtained from the field campaign and the wind power potential on this particular building and geometry.

  19. Smart Building Networks

    OpenAIRE

    Knezovic, Katarina

    2013-01-01

    This paper gives insight into the paradigm of Smart Grid with focus on the smart building as its fundamental part. After a theoretical description of a current grid?s evolution to smart form as well as basic features and functionalities of a smart building, a draft model of the building has been developed in the AnyLogic program. It simulates the behaviour of a smart building and possibilities it can provide to the grid through various scenarios. In the end, a cost and benefit analysis has be...

  20. Thermal comfort and market niches for apartment buildings: Impact of the current Thermal Regulation in the private real estate market in Santiago de Chile

    OpenAIRE

    Encinas Pino, Felipe; De Herde, André; Aguirre Núñez, Carlos; Marmolejo Duarte,Carlos; SET 2009 - 8th International Conference on Sustainable Energy Technologies

    2009-01-01

    Santiago (33°27’S; 70°42’W) is the capital city of Chile and presents a Mediterranean climate. With its 6 million inhabitants concentrates 40% of the population of the country and 65.5% of the private real estate market. According to the National Statistics Institute, 37.4% and 36.0% of new housing during 2006 were built using mainly brick masonry and concrete in their walls, respectively. In both cases, thermal insulation is not traditionally considered. However, nowadays apartment buildings...

  1. Health and Wellbeing of Occupants in Highly Energy Efficient Buildings: A Field Study

    Directory of Open Access Journals (Sweden)

    Peter Wallner

    2017-03-01

    Full Text Available Passive houses and other highly energy-efficient buildings need mechanical ventilation. However, ventilation systems in such houses are regarded with a certain degree of skepticism by parts of the public due to alleged negative health effects. Within a quasi-experimental field study, we investigated if occupants of two types of buildings (mechanical vs. natural ventilation experience different health, wellbeing and housing satisfaction outcomes and if associations with indoor air quality exist. We investigated 123 modern homes (test group: with mechanical ventilation; control group: naturally ventilated built in the years 2010 to 2012 in the same geographic area and price range. Interviews of occupants based on standardized questionnaires and measurements of indoor air quality parameters were conducted twice (three months after moving in and one year later. In total, 575 interviews were performed (respondents’ mean age 37.9 ± 9 years in the test group, 37.7 ± 9 years in the control group. Occupants of the test group rated their overall health status and that of their children not significantly higher than occupants of the control group at both time points. Adult occupants of the test group reported dry eyes statistically significantly more frequently compared to the control group (19.4% vs. 12.5%. Inhabitants of energy-efficient, mechanically ventilated homes rated the quality of indoor air and climate significantly higher. Self-reported health improved more frequently in the mechanically ventilated new homes (p = 0.005. Almost no other significant differences between housing types and measuring time points were observed concerning health and wellbeing or housing satisfaction. Associations between vegetative symptoms (dizziness, nausea, headaches and formaldehyde concentrations as well as between CO2 levels and perceived stale air were observed. However, both associations were independent of the type of ventilation. In summary, occupants of

  2. Predictor characteristics necessary for building a clinically useful risk prediction model: a simulation study

    Directory of Open Access Journals (Sweden)

    Laura Schummers

    2016-09-01

    Full Text Available Abstract Background Compelled by the intuitive appeal of predicting each individual patient’s risk of an outcome, there is a growing interest in risk prediction models. While the statistical methods used to build prediction models are increasingly well understood, the literature offers little insight to researchers seeking to gauge a priori whether a prediction model is likely to perform well for their particular research question. The objective of this study was to inform the development of new risk prediction models by evaluating model performance under a wide range of predictor characteristics. Methods Data from all births to overweight or obese women in British Columbia, Canada from 2004 to 2012 (n = 75,225 were used to build a risk prediction model for preeclampsia. The data were then augmented with simulated predictors of the outcome with pre-set prevalence values and univariable odds ratios. We built 120 risk prediction models that included known demographic and clinical predictors, and one, three, or five of the simulated variables. Finally, we evaluated standard model performance criteria (discrimination, risk stratification capacity, calibration, and Nagelkerke’s r2 for each model. Results Findings from our models built with simulated predictors demonstrated the predictor characteristics required for a risk prediction model to adequately discriminate cases from non-cases and to adequately classify patients into clinically distinct risk groups. Several predictor characteristics can yield well performing risk prediction models; however, these characteristics are not typical of predictor-outcome relationships in many population-based or clinical data sets. Novel predictors must be both strongly associated with the outcome and prevalent in the population to be useful for clinical prediction modeling (e.g., one predictor with prevalence ≥20 % and odds ratio ≥8, or 3 predictors with prevalence ≥10 % and odds ratios ≥4. Area

  3. Building a Mien-American house: A case study in school-community relations

    Science.gov (United States)

    Hammond, Lorie A.

    2000-10-01

    Researchers and policymakers agree that schools and parents must work together if they are to provide the sustenance, services, and support which children need to be successful in our increasingly complex society. (Clark, 1983; Comer, 1980, 1996; Clinton, 1995; Epstein, 1995, 1996). Unfortunately, the social and academic success of language minority students is often adversely affected by the alienation of parents from school culture and by the "deficit" view which teachers hold of language minority parents' academic and parenting skills (Boggs, 1985; Delgado-Gaitan, 1990; Heath, 1983; Lareau, 1987, 1989; Philips, 1983). This case study describes the attempts of one school site to build academic and social bridges between immigrant families from a Southeast Asian Hill Tribe, the Iu Mien, and a mainstream elementary school. This effort is facilitated by a constructivist approach to curriculum in which parents, teachers, and children create an intercultural space---a school community garden---as a context in which academic dialogue can occur. Various strategies which enable inter-cultural learning are described, including the use of students as ethnographers, of parents as expert teachers, and of teachers as cultural brokers. The study also considers the cultural conflicts and understandings which occurred when American teachers and Mien parents built a Mien field-house together: a structure which became symbolic of their blended lives. Through both a descriptive narration and interviews with various participants, the study analyzes (a) community-based curriculum development, led by practitioner reformers, as a way to enable language minority students to be academically successful within their own life worlds, as well as (b) the political and bureaucratic forces which make community-based reforms difficult to sustain. This study employs qualitative research strategies within an action-research context in which the author plays the dual role of practitioner reformer

  4. A Bottom-Up Building Stock Model for Tracking Regional Energy Targets—A Case Study of Kočevje

    Directory of Open Access Journals (Sweden)

    Marjana Šijanec Zavrl

    2016-10-01

    Full Text Available The paper addresses the development of a bottom-up building stock energy model (BuilS for identification of the building stock renovation potential by considering energy performance of individual buildings through cross-linked data from various public available databases. The model enables integration of various EE and RES measures on the building stock to demonstrate long-term economic and environmental effects of different building stock refurbishment strategies. In the presented case study, the BuilS model was applied in the Kočevje city area and validated using the measured energy consumption of the buildings connected to the city district heating system. Three strategies for improving the building stock in Kočevje towards a more sustainable one are presented with their impact on energy use and CO2 emission projections up to 2030. It is demonstrated that the BuilS bottom-up model enables the setting of a correct baseline regarding energy use of the existing building stock and that such a model is a powerful tool for design and validation of the building stock renovation strategies. It is also shown that the accuracy of the model depends on available information on local resources and local needs, therefore acceleration of the building stock monitoring on the level of each building and continually upgrading of databases with building renovation information is of the utmost importance.

  5. Building strong research partnerships between public health and researchers: a VA case study.

    Science.gov (United States)

    Midboe, Amanda M; Elwy, A Rani; Durfee, Janet M; Gifford, Allen L; Yakovchenko, Vera; Martinello, Richard A; Ross, David; Czarnogorski, Maggie; Goetz, Matthew B; Asch, Steven M

    2014-12-01

    We are in a new era of partner-based implementation research, and we need clear strategies for how to navigate this new era. Drawing on principles from community-based participatory research, the Clinical Public Health group of the Department of Veterans Affairs and the HIV/Hepatitis Quality Enhancement Research Initiative (HHQUERI) forged a longstanding partnership that has improved the care of Veterans with Human Immunodeficiency Virus (HIV) and Hepatitis C Virus. An exemplar HIV testing project epitomizes this partnership and is discussed in terms of the lessons learned as a result of our high level of collaboration around design, analysis, implementation, and dissemination across projects over the past several years. Lessons learned through this partnered testing program involve respecting different time horizons among the partners, identifying relevant research questions for both parties, designing flexible studies, engaging all partners throughout the research, and placing an emphasis on relationship building at all times. These lessons and strategies can benefit others conducting partner-based research both within the Veterans Health Administration (VA) and in other integrated healthcare systems.

  6. Behaviour Study of a Multi-Agent Mobile Robot System during Potential Field Building

    Directory of Open Access Journals (Sweden)

    István Nagy

    2009-12-01

    Full Text Available In this paper a multi-agent based mobile robot simulation system will bepresented where the behaviour of the system is studied with different number of agents (1,3,6 and also with different number of ultrasonic range sensors on agents (8 or 16 USsensors on individual agents. The task of the autonomous agents is to create the potentialfield (PF of an unknown environment. The classic problems of PF building, like oscillationand trapping, are not the focus of the article, but instead, the article is concerned with theagents’ self-organizing ability where self-organizing is controlled by a genetic algorithm(GA. The GA is equipped with two fitness functions where one “maintains” the distancesbetween certain agents (spat distr, while another “watches” the area coverage (areacover. In fact, the paper can be divided into three main parts. The first part describes theultrasonic sensing and range measuring with systematic errors, the potential field (PFbuilding and the moving strategies. The second part contains description of the GA, theoperation of the GA, the structure of the system, the fitness functions and a general systemerrordetermination. In the final third part, the obtained results are analyzed and presentedin the appendices.

  7. Fire safety assessment of super tall buildings: A case study on Shanghai Tower

    Directory of Open Access Journals (Sweden)

    Jian Jiang

    2015-10-01

    Full Text Available Shanghai Tower is an existing super high-rise building composed of mega frame-core-outrigger lateral resisting systems. Its structural safety in fire has been given great attention. This paper presents an independent review of the performance of Shanghai Tower in case of fire. Two fire scenarios: standard fires and parametric fires have been considered. The fire resistance of key component, including the concrete core, mega columns, the composite floor, outrigger trusses and belt trusses were examined first. Their real fire resistance periods proved to be far beyond the design fire resistance. The components with weak fire resistance such as peripheral steel columns and web members of belt trusses were then removed to study the resistance of the residual structure against progressive collapse. The results show that Shanghai Tower has a minimum of 3 h fire resistance against fire-induced progressive collapse. The concrete components have smaller residual displacements compared to the steel components. It is recommended, for the design of other similar structures, that effective fire protection should be provided for the outrigger trusses to guarantee the connection between the core and mega columns.

  8. Comparative study of mechanical properties of direct core build-up materials

    Directory of Open Access Journals (Sweden)

    Girish Kumar

    2015-01-01

    Full Text Available Background and Objectives: The strength greatly influences the selection of core material because core must withstand forces due to mastication and para-function for many years. This study was conducted to evaluate certain mechanical properties of commonly used materials for direct core build-up, including visible light cured composite, polyacid modified composite, resin modified glass ionomer, high copper amalgam, and silver cermet cement. Materials and Methods: All the materials were manipulated according to the manufacturer′s recommendations and standard test specimens were prepared. A universal testing machine at different cross-head speed was used to determine all the four mechanical properties. Mean compressive strength, diametral tensile strength, flexural strength, and elastic modulus with standard deviations were calculated. Multiple comparisons of the materials were also done. Results: Considerable differences in compressive strength, diametral tensile strength, and flexural strength were observed. Visible light cured composite showed relatively high compressive strength, diametral tensile strength, and flexural strength compared with the other tested materials. Amalgam showed the highest value for elastic modulus. Silver cermet showed less value for all the properties except for elastic modulus. Conclusions: Strength is one of the most important criteria for selection of a core material. Stronger materials better resist deformation and fracture provide more equitable stress distribution, greater stability, and greater probability of clinical success.

  9. Studying the Effect of Initial Damage on Failure Probability of One Story Steel Buildings

    Directory of Open Access Journals (Sweden)

    F. Nateghi

    2013-01-01

    Full Text Available Progressive collapse is a kind of failure in which the collapse of one or several load bearing elementsis ended in partial or total collapse of structures. If earthquakes induce progressive collapse, seismic and gravityloads cause initial failure propagating to other parts of structures. Therefore, seismic progressive collapse canoccur in structures regardless the number of stories. In this paper the behavior of a one story steel building isstudied to investigate the effect of initial damaged column position on the seismic progressive collapse. In thisregard the critical position of damaged column has been identified first and then, the effect of damaged columnis studied. Accordingly, nonlinear dynamic analysis has been used to obtain the fragility curves of the structureand investigate its failure probability. A damage index has also been used to validate the results. Based on theresults obtained in this research, the initial failure of a middle column can increase the failure probability ofstructures during earthquakes. Besides, among the evaluated design parameters, the failure probability ischanged significantly in the columns in accordance with their axial loads.

  10. Comparative study of mechanical properties of direct core build-up materials.

    Science.gov (United States)

    Kumar, Girish; Shivrayan, Amit

    2015-01-01

    The strength greatly influences the selection of core material because core must withstand forces due to mastication and para-function for many years. This study was conducted to evaluate certain mechanical properties of commonly used materials for direct core build-up, including visible light cured composite, polyacid modified composite, resin modified glass ionomer, high copper amalgam, and silver cermet cement. All the materials were manipulated according to the manufacturer's recommendations and standard test specimens were prepared. A universal testing machine at different cross-head speed was used to determine all the four mechanical properties. Mean compressive strength, diametral tensile strength, flexural strength, and elastic modulus with standard deviations were calculated. Multiple comparisons of the materials were also done. Considerable differences in compressive strength, diametral tensile strength, and flexural strength were observed. Visible light cured composite showed relatively high compressive strength, diametral tensile strength, and flexural strength compared with the other tested materials. Amalgam showed the highest value for elastic modulus. Silver cermet showed less value for all the properties except for elastic modulus. Strength is one of the most important criteria for selection of a core material. Stronger materials better resist deformation and fracture provide more equitable stress distribution, greater stability, and greater probability of clinical success.

  11. Building Alliances with (In)Voluntary Clients: A Study Focused on Therapists' Observable Behaviors.

    Science.gov (United States)

    Sotero, Luciana; Cunha, Diana; da Silva, José Tomás; Escudero, Valentín; Relvas, Ana Paula

    2016-11-14

    This study aimed to compare therapists' observable behaviors to promote alliances with involuntary and voluntary clients during brief family therapy. The therapists' contributions to fostering alliances were rated in sessions 1 and 4 using videotapes of 29 families who were observed in brief therapy. Using the System for Observing Family Therapy Alliances, trained raters searched for specific therapist behaviors that contributed to or detracted from the four alliance dimensions: engagement in the therapeutic process, an emotional connection with the therapist, safety within the therapeutic system, and a shared sense of purpose within the family. The results showed that when working with involuntary clients, therapists presented more behaviors to foster the clients' engagement and to promote a shared sense of purpose within the family. However, in the fourth session, the therapists in both groups contributed to the alliance in similar ways. The results are discussed in terms of (a) the therapists' alliance-building behaviors, (b) the specificities of each client group, and (c) the implications for clinical practice, training, and research. © 2016 Family Process Institute.

  12. Feasibility Study of Applying Recycled Aggregate from Building Debris in Concrete

    Institute of Scientific and Technical Information of China (English)

    PENG Yuzhu

    2011-01-01

    Coarse and fine aggregate constitutes an average of approximately 55% to 80% of the total volume of concrete materials.Concrete remains the most commonly-used building material worldwide.As a result,the massive use of aggregate will have a direct impact on the earth's natural resources if an appropriate replacement material is not found,violating the spirit of sustainable development.This study makes a preliminary examination of using coarse and fine aggregate produced from discarded construction materials in concrete.Results indicate that the compressive strength of densified mixture concrete at 28 days can reach 56.88MPa( recycled materials used as coarse aggregate,and natural sand used as fine aggregate)and 53.33 MPa (recycled materials used as both coarse and fine aggregate).While this type of material is not yet fully understood,further research into this area should enable feasible applications in concrete.However,unsuitable mixtures have serious impact on the durability and overall economy of concrete.Pending further research on suitable mixture designs,a complete application of recycled aggregate in concrete can be expected.

  13. Building capacity for evidence informed decision making in public health: a case study of organizational change.

    Science.gov (United States)

    Peirson, Leslea; Ciliska, Donna; Dobbins, Maureen; Mowat, David

    2012-02-20

    Core competencies for public health in Canada require proficiency in evidence informed decision making (EIDM). However, decision makers often lack access to information, many workers lack knowledge and skills to conduct systematic literature reviews, and public health settings typically lack infrastructure to support EIDM activities. This research was conducted to explore and describe critical factors and dynamics in the early implementation of one public health unit's strategic initiative to develop capacity to make EIDM standard practice. This qualitative case study was conducted in one public health unit in Ontario, Canada between 2008 and 2010. In-depth information was gathered from two sets of semi-structured interviews and focus groups (n = 27) with 70 members of the health unit, and through a review of 137 documents. Thematic analysis was used to code the key informant and document data. The critical factors and dynamics for building EIDM capacity at an organizational level included: clear vision and strong leadership, workforce and skills development, ability to access research (library services), fiscal investments, acquisition and development of technological resources, a knowledge management strategy, effective communication, a receptive organizational culture, and a focus on change management. With leadership, planning, commitment and substantial investments, a public health department has made significant progress, within the first two years of a 10-year initiative, towards achieving its goal of becoming an evidence informed decision making organization.

  14. Nanocluster building blocks of artificial square spin ice: Stray-field studies of thermal dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Pohlit, Merlin, E-mail: pohlit@physik.uni-frankfurt.de; Porrati, Fabrizio; Huth, Michael; Müller, Jens [Institute of Physics, Goethe-University Frankfurt, Frankfurt/Main (Germany); Ohno, Yuzo; Ohno, Hideo [Laboratory for Nanoelectronics and Spintronics, Research Institute of Electrical Communication, Tohoku University, Sendai (Japan)

    2015-05-07

    We present measurements of the thermal dynamics of a Co-based single building block of an artificial square spin ice fabricated by focused electron-beam-induced deposition. We employ micro-Hall magnetometry, an ultra-sensitive tool to study the stray field emanating from magnetic nanostructures, as a new technique to access the dynamical properties during the magnetization reversal of the spin-ice nanocluster. The obtained hysteresis loop exhibits distinct steps, displaying a reduction of their “coercive field” with increasing temperature. Therefore, thermally unstable states could be repetitively prepared by relatively simple temperature and field protocols allowing one to investigate the statistics of their switching behavior within experimentally accessible timescales. For a selected switching event, we find a strong reduction of the so-prepared states' “survival time” with increasing temperature and magnetic field. Besides the possibility to control the lifetime of selected switching events at will, we find evidence for a more complex behavior caused by the special spin ice arrangement of the macrospins, i.e., that the magnetic reversal statistically follows distinct “paths” most likely driven by thermal perturbation.

  15. Discussion on Ideological Building and Studying Style Building in University Class Culture Construction%浅议高校班级文化构建中的思想和学风建设

    Institute of Scientific and Technical Information of China (English)

    周蕾; 吴微

    2011-01-01

    Ideological building and studying style building in university class culture construction are the two important aspects of class work, which play a significant role in constructing harmonious campus environment, building good study atmosphere, and guiding the students' healthy growth.%高校班级文化构建中的思想建设和学风建设是班级工作的两个重要方面,在构建和谐校园环境、营造优质学习氛围、引导学生健康成长成才的过程中发挥着重大作用.

  16. Building America Case Study: Ground Source Heat Pump Research, TaC Studios Residence, Atlanta, Georigia (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-09-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed-humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach to potential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STAR requirements, and a high performance heating and cooling system. Construction quality and execution was a high priority for TaC Studios and was ensured by a third party review process. Post construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowner's wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this home was evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored to determine their impact on overall energy consumption.

  17. Computational Fluid Dynamics Study on the Influence of Airflow Patterns on Carbon Dioxide Distribution in a Scaled Livestock Building

    DEFF Research Database (Denmark)

    Rong, Li; Nielsen, Peter V.; Tong, Guohong

    2008-01-01

    Airflow patterns and airflow rate have an important influence on contaminant distribution in livestock buildings. The objective of this paper is to model and evaluate the effect of airflow rates and airflow patterns effect on CO2 concentration distribution and emission rates in a scaled livestock...... building with slatted floor. Contaminant sources are assumed to be modelled as a constant concentration on the manure surface. Three different ventilation rates and two different deflector degrees are studied, in which the deflector is applied to change the airflow patterns. A CFD commercial software code...

  18. Temperature Sensor Feasibility Study of Wireless Sensor Network Applications for Heating Efficiency Maintenance in High-Rise Apartment Buildings

    Directory of Open Access Journals (Sweden)

    Freliha B.

    2015-06-01

    Full Text Available Cities are responsible for 60%-80% of the world’s energy use and for approximately the same percentage of greenhouse gas emissions. The existing multi-apartment buildings of multifamily housing sector are often energy inefficient, and the heating system does not ensure optimization of heat distribution of individual apartments. Heat distribution, heating system balancing, heat loss detection and calculation, individual heat energy accounting are difficult tasks to accomplish. This article deals with the temperature monitoring system designed to retrieve temperature differences necessary for overall building heat monitoring and individual apartment monitoring. The sensor testing case study process and its measurements are analysed.

  19. Air conditioning and energy conservation. Improved space HVAC systems. Case studies: Office buildings, hotels, shopping centers, skyscrapers, industrial plants

    Energy Technology Data Exchange (ETDEWEB)

    Heiner, H.

    1988-08-01

    Rising energy prices and an increasing demand for comfortable rooms account for the importance attached to the windows and glass used for office buildings, hotels and industrial plants. Both windows and glass have a considerable influence on the thermal behavior and air conditioning of buildings. Among the latest developments are precious metal-coated insulating panes. Selected gases allow to reduce the total thickness of insulating glass and improve noise insulation. The case studies presented refer to the energy-saving air conditioning and space heating, heat recovery and cooling of rooms as well as to the respective control systems. Investigations into the specific energy consumption of building shells reveal the considerable space/tap water heating energy conservation potentials remaining to be utilized.

  20. New Seismic Hazard study in Spain Aimed at the revision of the Spanish Building Code

    Science.gov (United States)

    Rivas-Medina, A.; Benito, B.; Cabañas, L.; Martínez-Solares, J. M.; Ruíz, S.; Gaspar-Escribano, J. M.; Carreño, E.; Crespo, M.; García-Mayordomo, J.

    2013-05-01

    In this paper we present a global overview of the recent study carried out in Spain for the new hazard map, which final goal is the revision of the Building Code in our country (NCSE-02). The study was carried our for a working group joining experts from The Instituto Geografico Nacional (IGN) and the Technical University of Madrid (UPM) , being the different phases of the work supervised by an expert Committee integrated by national experts from public institutions involved in subject of seismic hazard. The PSHA method (Probabilistic Seismic Hazard Assessment) has been followed, quantifying the epistemic uncertainties through a logic tree and the aleatory ones linked to variability of parameters by means of probability density functions and Monte Carlo simulations. In a first phase, the inputs have been prepared, which essentially are: 1) a project catalogue update and homogenization at Mw 2) proposal of zoning models and source characterization 3) calibration of Ground Motion Prediction Equations (GMPE's) with actual data and development of a local model with data collected in Spain for Mw logic tree and their weights. Finally, the hazard estimation was done with the logic tree shown in figure 1, including nodes for quantifying uncertainties corresponding to: 1) method for estimation of hazard (zoning and zoneless); 2) zoning models, 3) GMPE combinations used and 4) regression method for estimation of source parameters. In addition, the aleatory uncertainties corresponding to the magnitude of the events, recurrence parameters and maximum magnitude for each zone have been also considered including probability density functions and Monte Carlo simulations The main conclusions of the study are presented here, together with the obtained results in terms of PGA and other spectral accelerations SA (T) for return periods of 475, 975 and 2475 years. The map of the coefficient of variation (COV) are also represented to give an idea of the zones where the dispersion among