WorldWideScience

Sample records for current profilers adcps

  1. Use of the Acoustic Doppler Current Profiler (ADCP in the study of the circulation of the Adriatic Sea

    Directory of Open Access Journals (Sweden)

    L. Ursella

    Full Text Available The results of basin-wide vessel-mounted ADCP measurements carried out from May 1995 through February 1996 in the Adriatic Sea are analysed in order to characterise the tidal flow, the steady current field and some specific sub-basin scale features. The M2 tide shows the amphidromic point close to the location predicted from theory. The K1 presents an almost constant phase structure that increases in the northern part from east to west during summer. The circulation in the Italian coastal shelf area is highly variable, due to the local wind forcing and pulses of the Po River discharge. The propagation of the signal associated with the latter, can be described in terms of hybrid internal Kelvin waves, revealed also from the upwelling events. It is also shown that the bottom density-driven current draining the bottom layer of the northern Adriatic is, to a large extent, a time-dependent feature with a temporal scale on the order of days.

    Key words. Oceanography: general (descriptive and regional oceanography; marginal and semi-enclosed seas Oceanography: physical (currents

  2. Use of the acoustic Doppler current profiler (ADCP) in the study of the circulation of the Adriatic sea

    Energy Technology Data Exchange (ETDEWEB)

    Ursella, L.; Gacic, M. [Ist. Nazionale di Oceanografia e di Geofisica Sperimentale, Trieste (Italy)

    2001-09-01

    The results of basin-wide vessel-mounted ADCP measurements carried out from May 1995 through February 1996 in the Adriatic Sea are analysed in order to characterise the tidal flow, the steady current field and some specific subbasin scale features. The M2 tide shows the amphidromic point close to the location predicted from theory. The K1 presents an almost constant phase structure that increases in the northern part from east to west during summer. The circulation in the Italian coastal shelf area is highly variable, due to the local wind forcing and pulses of the Po River discharge. The propagation of the signal associated with the latter, can be described in terms of hybrid internal Kelvin waves, revealed also from the upwelling events. It is also shown that the bottom density-driven current draining the bottom layer of the northern Adriatic is, to a large extent, a time-dependent feature with a temporal scale on the order of days. (orig.)

  3. Monitoring tidal currents with a towed ADCP system

    Science.gov (United States)

    Sentchev, Alexei; Yaremchuk, Max

    2016-01-01

    The tidal circulation in the semi-enclosed Boulogne harbour (eastern English Channel) is measured during the various stages of the tidal cycle with a low-cost towed Acoustic Doppler Current Profiler (ADCP) system for the first time. The system is equipped with an interpolation algorithm which allows reconstructing space-time evolution of the velocity field for surveys whose duration is comparable or larger than the typical time of tidal variation (1-2 h). The method employs space-time velocity covariances derived from a numerical simulation of the surveyed area by a high-resolution relocatable model "Model for Applications on Regional Scale" (MARS). The covariances are utilized by the optimal interpolation algorithm to obtain the most likely evolution of the velocity field under the constraints provided by the ADCP observations and their error statistics. Technically, the MARS model run provides the first guess (background) evolution of the velocity field in the surveyed area which is then corrected by the data in a statistically consistent manner as it explicitly takes into the account both observational and modeling errors. The quality of the velocity reconstruction was validated against independent bottom-mounted ADCP data, the background model evolution, and against the results of spatial interpolation by Kriging technique. All tests demonstrated significant (30 to 60 %) reduction of the model-data misfit for the velocity field obtained as a result of space-time optimal interpolation. Although the method was applied to recover surface circulation, it can be extended for assessment of the full 4D tidal flow dynamics using the data recorded throughout the entire water column.

  4. Vessel-mounted acoustic Doppler current profiler (ADCP) data from the mouth of the Columbia River, Oregon and Washington, 2013

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Spatial surveys of water column currents were performed between June 14 and 16, 2013, in the mouth of the Columbia River, Oregon and Washington. These data were...

  5. Current measurements from acoustic doppler current profilers (ADCP) in the southwest Atlantic Ocean from the World Ocean Circulation Experiment (WOCE) from 1991-01-03 to 1992-11-26 (NODC Accession 0087597)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data from the ADCP instruments of BE/335 and BW/333 from January 3, 1991 to November 26, 1992 collected as part of the World Ocean Circulation...

  6. Hanalei Bay, Kauai tide, and directional current and wave data collected from Acoustic Doppler Current Profiler (ADCP), from 08 June 2006 to 05 September 2006 (NODC Accession 0067695)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — High-resolution measurements of waves, currents, water levels, temperature, salinity and turbidity were made in Hanalei Bay, Kauai,Hawaii during the summer of 2006....

  7. VM-ADCP measured upper ocean currents in the southeastern Arabian Sea and Equatorial Indian Ocean during December, 2000

    Digital Repository Service at National Institute of Oceanography (India)

    Murty, V.S.N.; Suryanarayana, A.; Somayajulu, Y.K.; Raikar, V.; Tilvi, V.

    The Vessel-Mounted Acoustic Doppler Current Profiler (VM-ADCP) measured currents in the upper 200 m along the cruise track covering the southeastern Arabian Sea and the Eastern Equatorial Indian Ocean during northern winter monsoon (10-31 December...

  8. Surface current dynamics under sea breeze conditions observed by simultaneous HF radar, ADCP and drifter measurements

    Science.gov (United States)

    Sentchev, Alexei; Forget, Philippe; Fraunié, Philippe

    2017-02-01

    Ocean surface boundary layer dynamics off the southern coast of France in the NW Mediterranean is investigated by using velocity observations by high-frequency (HF) radars, surface drifting buoys and a downward-looking drifting acoustic Doppler current profiler (ADCP). The analysis confirms that velocities measured by HF radars correspond to those observed by an ADCP at the effective depth z f = k -1, where k is wavenumber of the radio wave emitted by the radar. The radials provided by the radars were in a very good agreement with in situ measurements, with the relative errors of 1 and 9 % and root mean square (RMS) differences of 0.02 and 0.04 m/s for monostatic and bistatic radar, respectively. The total radar-based velocities appeared to be slightly underestimated in magnitude and somewhat biased in direction. At the end of the survey period, the difference in the surface current direction, based on HF radar and ADCP data, attained 10°. It was demonstrated that the surface boundary layer dynamics cannot be reconstructed successfully without taking into the account velocity variation with depth. A significant misalignment of ˜30° caused by the sea breeze was documented between the HF radar (HFR-derived) surface current and the background current. It was also found that the ocean response to a moderate wind forcing was confined to the 4-m-thick upper layer. The respective Ekman current attained the maximum value of 0.15 m/s, and the current rotation was found to be lagging the wind by approximately 40 min, with the current vector direction being 15-20° to the left of the wind. The range of velocity variability due to wind forcing was found comparable with the magnitude of the background current variability.

  9. Vessel-mounted acoustic-doppler current profiler (ADCP) and surface-wind data from the National Park of American Samoa, Tutuila, American Samoa, 2015

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Spatial surveys of water column currents and surface winds were conducted from February 17 to 20, 2015, off the north coast of the island of Tutuila, American Samoa....

  10. Ocean current data measured by the Acoustic Doppler Current Profiler (ADCP) aboard the Development Driller III from 2010-05-31 to 2010-07-04 in the Gulf of Mexico in response to the Deepwater Horizon oil spill (NODC Accession 0083634)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean current data were collected by ADCP aboard the Discoverer Enterprise in the Gulf of Mexico in response to the Deepwater Horizon oil spill event on April 20,...

  11. Ocean current data measured by the Acoustic Doppler Current Profiler (ADCP) aboard the Discoverer Enterprise oil platform from May 23, 2010 to July 04, 2010 in the Gulf of Mexico in response to the Deepwater Horizon oil spill (NODC Accession 0083684)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean current data were collected by ADCP aboard the Discoverer Enterprise in the Gulf of Mexico in response to the Deepwater Horizon oil spill event on April 20,...

  12. NOAA/EcoFOCI Chukchi Sea ADCP Mooring time-series data, stations C1, C2, and C3, 2010-08-29 to 2012-08-22, including zonal (U) and meridional (V) current measurements. (NCEI Accession 0149848)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These Acoustic Doppler Current Profiler (ADCP) time-series data sets, consist of zonal current (U) and meridional current (V) measurements from moored instruments at...

  13. Ocean currents measured by Shipboard Acoustic Doppler Current Profiler (SADCP) from global oceans as part of the Joint Archive for Shipboard ADCP holdings from 16 June 1985 to 22 July 2003 (NODC Accession 0001206)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Absolute U- and V-component ocean current vectors from Shipboard Acoustic Doppler Current Profilers (SADCP), as both a high frequency sampling (nominally 5 minutes...

  14. Ocean currents measured by Shipboard Acoustic Doppler Current Profiler (SADCP) from global oceans as part of the Joint Archive for Shipboard ADCP holdings from 9 October 1990 to 27 August 2004 (NODC Accession 0001974)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Absolute U- and V-component ocean current vectors from Shipboard Acoustic Doppler Current Profilers (SADCP), as both a high frequency sampling (nominally 5 minutes...

  15. Ocean currents measured by Shipboard Acoustic Doppler Current Profiler (SADCP) from global oceans as part of the Joint Archive for Shipboard ADCP holdings from 8 October 1993 to 16 March 2008 (NODC Accession 0049878)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Absolute U- and V-component ocean current vectors from Shipboard Acoustic Doppler Current Profilers (SADCP), as both a high frequency sampling (nominally 5 minutes...

  16. Ocean currents measured by Shipboard Acoustic Doppler Current Profiler (SADCP) from global oceans as part of the Joint Archive for Shipboard ADCP holdings from 13 September 1999 to 28 April 2007 (NCEI Accession 0036863)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Absolute U- and V-component ocean current vectors from Shipboard Acoustic Doppler Current Profilers (SADCP), as both a high frequency sampling (nominally 5 minutes...

  17. Ocean currents measured by Shipboard Acoustic Doppler Current Profiler (SADCP) from global oceans as part of the Joint Archive for Shipboard ADCP holdings from 16 June 1985 to 23 March 2001 (NCEI Accession 0000755)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Absolute U- and V-component ocean current vectors from Shipboard Acoustic Doppler Current Profilers (SADCP), as both a high frequency sampling (nominally 5 minutes...

  18. Ocean currents measured by Shipboard Acoustic Doppler Current Profiler (SADCP) from global oceans as part of the Joint Archive for Shipboard ADCP holdings from 6 November 1993 to 11 October 2005 (NODC Accession 0002679)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Absolute U- and V-component ocean current vectors from Shipboard Acoustic Doppler Current Profilers (SADCP), as both a high frequency sampling (nominally 5 minutes...

  19. Ocean Current Velocity Moored Time-Series Records, collected from moored Acoustic Doppler Current Profilers (ADCP) during 2011 near Grammanik Bank SPAG and Frenchcap Cay, USVI (NODC Accession 0088064)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Nortek 600kHz Aquadopp acoustic current profilers were deployed between April 2011 and September 2011 on shallow water moorings located on the coastal shelf south of...

  20. Hull-Mounted (shipboard) Acoustic Doppler Current Profiler (ADCP) data collected during shipboard surveys during 2010 and 2011 in Vieques Sound, Virgin Passage and surrounding regions (NODC Accession 0088063)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Teledyne RD Instruments Ocean Surveyor 150kHz and Workhorse 300kHz ADCPs were utilized during cruises conducted between March 2010 and April 2011 in Vieques Sound,...

  1. ADCP measured flow current of the middle-lower Changjiang River channel

    Institute of Scientific and Technical Information of China (English)

    Qiang ZHANG; Yafeng SHI; Zhongyuan CHEN; Tong JIANG

    2008-01-01

    The water column flow velocity of 36 river sections in the river reach between Hankou (Wuhan) and Wuxue of the middle-lower Changjiang River.Their cross sectional distribution patterns in relation to the river channel morphologies were examined by using shipmounted ADCP (Acoustic Doppler Current Profiler) instrument.The results indicate four (Ⅰ-Ⅳ) types of river channel morphology associated flow patterns:Ⅰ-laterally deepening riverbed topographic pattern; Ⅱ-symmetrical to asymmetrical riverbed topographic pattern; Ⅲ-relative fiat riverbed topographic pattern,and Ⅳ-sandbar supported riverbed topographic pattern.All these correspond to the different patterns of flow velocity distribution.The maximum flow velocity is usually related to the deeper water depth,but irregular water column distribution of flow current velocity results often from the vortices' current associated with river knots.Deeper river water depth is usually identified in the river reach located slightly downstream to the river knot,where faster flow velocity occurs.Downward change in flow velocity fits semi-log law,showing an exponential decreasing flow current with the maximum flow velocity near the water surface.However,in the river reach near the river knots,the water column distribution of flow current velocity does not fit the semi-log law,showing the irregular flow current pattern.This study,in context of river catchment management,highlights the controls of riverbed morphology to the flow current structure,which will shed light on the post study of Three Gorges damming in 2009.

  2. West Coast Observing System (WCOS) ADCP Currents Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The West Coast Observing System (WCOS) project provides access to temperature and currents data collected at four of the five National Marine Sanctuary sites,...

  3. Monitoring Tidal Currents with a Towed ADCP System

    Science.gov (United States)

    2015-12-22

    throughout the water column were corrected for boat motion, using both bottom-tracking and GPS coordinates available at 1-s resolution, and then...successful selection of technology and devices to be deployed. However, site selection is not simply a case of identifying areas with strong tidal currents... Naval Research Laboratory, Stennis Space Center, Bldg. 1009, Mississippi, MS 39529, USA Ocean Dynamics (2016) 66:119–132 DOI 10.1007/s10236-015-0913-z

  4. Water velocities collected using an Acoustic Doppler Current Profiler (ADCP) from the R.V. Weicker in the Eastern Long Island Sound for the Global Ocean Data Archaeology and Rescue Project from 2009-11-29 to 2010-08-25. (NCEI Accession 0145671)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A 600 kHz RD Instruments ADCP was installed in the well of the R/V Weicker (Univ of Connecticut) and used to collect measurements of water velocity profiles along...

  5. Synoptic Field Measurements In The Ems Estuary Combining Adcp, Multi Sensor Equipped Current Meter and Gauge Data

    Science.gov (United States)

    Jensen, J.; Frank, T.; Mudersbach, Ch.

    The estuary of the Ems River is located in the north-west of Germany and forms partly the border line between the Netherlands and Germany. Between the lower Ems River and the outer estuary to the North Sea a brackish shallow water basin of mesohalin characteristics is located - the Dollart. The surface area ist about 100 km2 and the only barrier which separates the Dollart from the Ems navigation channel is a sand split with a riprap training works. This barrier is only partially effective and during the flood phase water exchange takes place. Prior to the commission of the currently constructed Ems barrier a synoptic, multi- institutional field measuring effort has been undertaken in March 2001. The purpose was a) to reach a more in depth understanding of the exchange situation between Dollart and the Ems river regarding discharge as well as salinity and oxygen content. b) To get a basis for assessment of potential impacts of the future operation of the Ems Barrier. In several measuring profiles ship-supported ADCP measurements (Acoustic Doppler Current Profiler) for a whole tide cycle were executed. These measurements are com- pleted by data of numerous measuring probes and tide gauges along the lower Ems River, the Ems navigational channel and in the Dollart covering the period of one month. This paper discusses the accomplished survey as well as the compilation of the gath- ered data. Thereby the software "TIDE" of the German Federal Institute of Hydrology (BFG) will be presented. This software is specialised in the assessment and visual- isation of ADCP Data gathered in tidal areas. This presentation concludes with the application of a database management system alongside with a geographical informa- tion system for the storage, visualisation and distribution of the collected data.

  6. TAO/TRITON, RAMA, and PIRATA Buoys, Daily, ADCP

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has daily Acoustic Doppler Current Profiler (ADCP) water currents data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA (Indian...

  7. TAO/TRITON, RAMA, and PIRATA Buoys, Monthly, ADCP

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has monthly Acoustic Doppler Current Profiler (ADCP) water currents data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA...

  8. TAO/TRITON, RAMA, and PIRATA Buoys, Quarterly, ADCP

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has quarterly Acoustic Doppler Current Profiler (ADCP) water currents data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA...

  9. TAO/TRITON, RAMA, and PIRATA Buoys, 5-Day, ADCP

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has 5-day Acoustic Doppler Current Profiler (ADCP) water currents data from the TAO/TRITON (Pacific Ocean, http://www.pmel.noaa.gov/tao/), RAMA (Indian...

  10. Moored ADCP Current Measurements from Mamala Bay, Oahu, Hawaii during 1997-1998 (NODC Accession 0000624)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A downward-looking moored ADCP instrument was deployed at the surface about a mile south of Honolulu Harbor in waters of about 280 feet. The instrument was in...

  11. Physical, chemical, and deepwater current profiles collected from CTD, XBT, and ADCP moorings in the Eastern Gulf of Mexico from January 19, 2005 to January 28, 2006 (NODC Accession 0070922)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A Minerals Management Service (MMS) program entitled Survey of Deepwater Currents in the Eastern Gulf of Mexico, awarded to Evans-Hamilton, Inc. This data set...

  12. ALOHA Cabled Observatory (ACO): Acoustic Doppler Current Profiler (ADCP): Temperature

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Hawaii's ALOHA ("A Long-term Oligotrophic Habitat Assessment") Cabled Observatory (ACO) is located 100 km north of the island of Oahu, Hawaii (22...

  13. ALOHA Cabled Observatory (ACO): Acoustic Doppler Current Profiler (ADCP): Velocity

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The University of Hawaii's ALOHA ("A Long-term Oligotrophic Habitat Assessment") Cabled Observatory (ACO) is located 100 km north of the island of Oahu, Hawaii (22...

  14. Continuous measurements of discharge from a horizontal acoustic Doppler current profiler in a tidal river

    NARCIS (Netherlands)

    Hoitink, A.J.F.; Buschman, F.A.; Vermeulen, B.

    2009-01-01

    Acoustic Doppler current profilers (ADCPs) can be mounted horizontally at a river bank, yielding single-depth horizontal array observations of velocity across the river. This paper presents a semideterministic, semistochastic method to obtain continuous measurements of discharge from horizontal ADCP

  15. Ocean currents measured by shipboard ADCP from global oceans from the Joint Archive for Shipboard ADCP holdings from 2000-07 to 2012-02 (NODC Accession 0093159)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Absolute U- and V-component ocean current vectors from Shipboard Acoustic Doppler Current Profilers (SADCP), as both a high frequency sampling (nominally 5 minutes...

  16. Acoustic Doppler Current Profiling near Shorty's Island, June 1, 2012, Kootenai River near Bonners Ferry, ID

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — An Acoustic Doppler Current Profiler (ADCP) was used to survey streamflow characteristics including total streamflow, velocity magnitude and secondary flow...

  17. Acoustic Doppler Current Profiling near Myrtle Bend, June 3, 2013, Kootenai River near Bonners Ferry, ID

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Acoustic doppler current profiling (ADCP) data was collected to describe streamflow characteristics including total streamflow, velocity magnitude and secondary flow...

  18. Buoyancy package for self-contained acoustic doppler current profiler mooring

    Digital Repository Service at National Institute of Oceanography (India)

    Venkatesan, R.; Krishnakumar, V.

    A buoyancy package for self-contained Acoustic Doppler Current Profiler(SC-ADCP 1200 RD instruments USA) was designed and fabricated indigenously, for subsurface mooring in coastal waters. The system design is discussed. The design to keep SC...

  19. Velocity bias induced by flow patterns around ADCPs and associated deployment platforms

    Science.gov (United States)

    Mueller, David S.

    2015-01-01

    Velocity measurements near the Acoustic Doppler Current Profiler (ADCP) are important for mapping surface currents, measuring velocity and discharge in shallow streams, and providing accurate estimates of discharge in the top unmeasured portion of the water column. Improvements to ADCP performance permit measurement of velocities much closer (5 cm) to the transducer than has been possible in the past (25 cm). Velocity profiles collected by the U.S. Geological Survey (USGS) with a 1200 kHz Rio Grande Zedhead ADCP in 2002 showed a negative bias in measured velocities near the transducers. On the basis of these results, the USGS initiated a study combining field, laboratory, and numerical modeling data to assess the effect of flow patterns caused by flow around the ADCP and deployment platforms on velocities measured near the transducers. This ongoing study has shown that the negative bias observed in the field is due to the flow pattern around the ADCP. The flow pattern around an ADCP violates the basic assumption of flow homogeneity required for an accurate three-dimensional velocity solution. Results, to date (2014), have indicated velocity biases within the measurable profile, due to flow disturbance, for the TRDI 1200 kHz Rio Grande Zedhead and the SonTek RiverSurveyor M9 ADCPs. The flow speed past the ADCP, the mount and the deployment platform have also been shown to play an important role in the magnitude and extent of the velocity bias.

  20. Tethered acoustic doppler current profiler platforms for measuring streamflow

    Science.gov (United States)

    Rehmel, Michael S.; Stewart, James A.; Morlock, Scott E.

    2003-01-01

    The U.S. Geological Survey tested and refined tethered-platform designs for measuring streamflow. Platform specifications were developed, radio-modem telemetry of acoustic Doppler current profiler (ADCP) data and potential platform-hull sources were investigated, and hulls were tested and evaluated.

  1. Comparison of shipboard acoustic Doppler current profiler and moored current measurements in the Equatorial Pacific

    Science.gov (United States)

    Chereskin, T. K.; Regier, L. A.; Halpern, D.

    1987-01-01

    Depth-averaged current shears computed from shipboard acoustic Doppler current profiler (ADCP) and moored Savonius rotor and vane vector-averaging current meter (VACM) measurements are compared at 35, 62.5, 100 and 140 m depths within 7 km of each other near 0 deg, 140 deg W during a 12-day interval in November 1984. The agreement between the VACM and ADCP shears was excellent. The average root-mean-square difference of hourly shear values was small, approximately 0.0021/s, and the average correlation coefficient was 0.90. Spectral estimates were equivalent to within a 95 percent significance level and the VACM and ADCP shears were 95 percent statistically coherent with zero phase difference for frequencies below 0.2 cycles per hour.

  2. Coupled penetrometer, MBES and ADCP assessments of tidal variations of the surface sediment layer along active subaqueous dunes, Danish Wadden Sea

    DEFF Research Database (Denmark)

    Stark, Nina; Hanff, Henrik; Svenson, Christian;

    2011-01-01

    a tidal cycle were compared to mean current velocities (measured using an acoustic Doppler current profiler, ADCP), high-resolution bathymetry (based on multibeam echo sounding, MBES) and qualitative estimates of suspended sediment distributions in the water column (estimated from ADCP backscatter...

  3. NODC Standard Product: Naval Surface Weapons Center (NSWC) moored ADCP data 1994-1995 (Straits of Florida) (NODC Accession 0095602)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This database contains Acoustic Doppler Current Profiler (ADCP) data collected during 1994-1995 on the eastern shelf of Florida. The data were collected at...

  4. Studying the Origin of the Kuroshio with an Array of ADCP-CTD Moorings

    Science.gov (United States)

    2014-09-30

    ADCP-CTD Moorings Ren-Chieh Lien Applied Physics Laboratory University of Washington 1013 NE 40th Street Seattle, Washington 98105 Phone: (206...APPROACH An array of six subsurface moorings was deployed in June 2012 northeast of the Philippines, where the strong Kuroshio enters Luzon Strait...All moorings were recovered in June 2013. Each mooring had an Acoustic Doppler Current Profiler (ADCP) to measure the velocity field in the upper

  5. Temperature profiles and current measurements from the Nathaniel B. Palmer during the 1997 Dovetail cruise in the Southern Ocean (NODC Accession 9900243)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data collection includes temperature profiles from CTD casts and current measurements from hull-mounted ADCP system aboard the research vessel Nathaniel B....

  6. Validation of streamflow measurements made with M9 and RiverRay acoustic Doppler current profilers

    Science.gov (United States)

    Boldt, Justin A.; Oberg, Kevin A.

    2015-01-01

    The U.S. Geological Survey (USGS) Office of Surface Water (OSW) previously validated the use of Teledyne RD Instruments (TRDI) Rio Grande (in 2007), StreamPro (in 2006), and Broadband (in 1996) acoustic Doppler current profilers (ADCPs) for streamflow (discharge) measurements made by the USGS. Two new ADCPs, the SonTek M9 and the TRDI RiverRay, were first used in the USGS Water Mission Area programs in 2009. Since 2009, the OSW and USGS Water Science Centers (WSCs) have been conducting field measurements as part of their stream-gaging program using these ADCPs. The purpose of this paper is to document the results of USGS OSW analyses for validation of M9 and RiverRay ADCP streamflow measurements. The OSW required each participating WSC to make comparison measurements over the range of operating conditions in which the instruments were used until sufficient measurements were available. The performance of these ADCPs was evaluated for validation and to identify any present and potential problems. Statistical analyses of streamflow measurements indicate that measurements made with the SonTek M9 ADCP using firmware 2.00–3.00 or the TRDI RiverRay ADCP using firmware 44.12–44.15 are unbiased, and therefore, can continue to be used to make streamflow measurements in the USGS stream-gaging program. However, for the M9 ADCP, there are some important issues to be considered in making future measurements. Possible future work may include additional validation of streamflow measurements made with these instruments from other locations in the United States and measurement validation using updated firmware and software.

  7. Acoustic Doppler current profiler raw measurements on the Missouri and Yellowstone rivers, 2000-2016, Columbia Environmental Research Center

    Science.gov (United States)

    Bulliner, Edward A.; Elliott, Caroline M.; Jacobson, Robert B.

    2017-01-01

    Between the years 2000 and 2016, scientists and technicians from the U.S. Geological Survey (USGS) Columbia Environmental Research Center (CERC) have collected over 400 field-days worth of acoustic Doppler current profiler (ADCP) measurements on the Missouri and Yellowstone Rivers, primarily for the purposes of assessing physical aquatic habitat for the pallid sturgeon. Scientists and technicians collected data using boat-mounted Teledyne Rio Grande ADCPs, which were processed using customized scripting tools and archived in standardized formats. To assess longitudinal variability in depth and velocity distributions along the Missouri River, as well as compare the Missouri River to its unaltered analog, the Yellowstone River, we compiled the collected datasets into a single comma-separated value (csv) file using a series of data-processing scripts written in Python. To allow for the comparison of measurements collected only within a specific window of flow exceedance, we conducted geospatial analyses to attribute each ADCP measurement by a discharge from the most relevant USGS gage location (with the most relevant gage location being the gage located between the same major tributaries as the measurement, even if it was not the closest spatially), and assigned each measurement a flow exceedance percentile based on the relevant gage's record between 2000 and 2016. We also conducted general quality control on the data, discarding any ADCP returns where the ADCP measured a depth-averaged velocity greater than 3 meters per second or a depth greater than 16 meters; these values were considered to be an approximate upper bounds for realistic values on the Missouri and Yellowstone Rivers. The presented csv file lists individual ADCP bins for all measurements that have been archived between 2000 and 2016 by CERC scientists along with their three-dimensional velocity components, depth-averaged velocity magnitude for a given ADCP return, average channel depth for a given ADCP

  8. Variance of discharge estimates sampled using acoustic Doppler current profilers from moving boats

    Science.gov (United States)

    Garcia, Carlos M.; Tarrab, Leticia; Oberg, Kevin; Szupiany, Ricardo; Cantero, Mariano I.

    2012-01-01

    This paper presents a model for quantifying the random errors (i.e., variance) of acoustic Doppler current profiler (ADCP) discharge measurements from moving boats for different sampling times. The model focuses on the random processes in the sampled flow field and has been developed using statistical methods currently available for uncertainty analysis of velocity time series. Analysis of field data collected using ADCP from moving boats from three natural rivers of varying sizes and flow conditions shows that, even though the estimate of the integral time scale of the actual turbulent flow field is larger than the sampling interval, the integral time scale of the sampled flow field is on the order of the sampling interval. Thus, an equation for computing the variance error in discharge measurements associated with different sampling times, assuming uncorrelated flow fields is appropriate. The approach is used to help define optimal sampling strategies by choosing the exposure time required for ADCPs to accurately measure flow discharge.

  9. A GIS-based Computational Tool for Multidimensional Flow Velocity by Acoustic Doppler Current Profilers

    Science.gov (United States)

    Kim, D.; Winkler, M.; Muste, M.

    2015-06-01

    Acoustic Doppler Current Profilers (ADCPs) provide efficient and reliable flow measurements compared to other tools for characteristics of the riverine environments. In addition to originally targeted discharge measurements, ADCPs are increasingly utilized to assess river flow characteristics. The newly developed VMS (Velocity Mapping Software) aims at providing an efficient process for quality assurance, mapping velocity vectors for visualization and facilitating comparison with physical and numerical model results. VMS was designed to provide efficient and smooth work flows for processing groups of transects. The software allows the user to select group of files and subsequently to conduct statistical and graphical quality assurance on the files as a group or individually as appropriate. VMS also enables spatial averaging in horizontal and vertical plane for ADCP data in a single or multiple transects over the same or consecutive cross sections. The analysis results are displayed in numerical and graphical formats.

  10. H-ADCP 实验室检测方法研究%Study of H-ADCP testing and verification method

    Institute of Scientific and Technical Information of China (English)

    刘艳平; 华涛; 周彬

    2014-01-01

    本文阐述了声学多普勒效应的原理;根据声学多普勒原理推导出了 ADCP 测流速公式;介绍了国标中ADCP 的检测方法以及测试条件设备;主要介绍了 H-ADCP,提出一种较简单的 H-ADCP 实验室检测方法。%Describe the principle of acoustic Doppler effect;According to the principle of acoustic Doppler effect deduces current velocity formula of ADCP;Introduce the method for measuring ADCP in national standard and the testing condition、the tes-ting equipment;Mainly introduce H-ADCP;And propose a simple test method of H-ADCP in laboratory.

  11. Acoustic Doppler current profiling from the JGOFS Arabian Sea cruises aboard the RV T.G. Thompson

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H.S.; Flagg, C.N.; Shi, Y. [Brookhaven National Lab., Upton, NY (United States). Oceanographic and Atmospheric Sciences Div.

    1996-12-01

    Acoustic Doppler current profiler (ADCP) data is part of the core data for the US JGOFS Arabian Sea project, along with hydrographic and nutrient data. Seventeen cruises are scheduled to take place between September 1994 and January 1996 on the R/V T.G. Thompson. Seven of the cruises follow a standard cruise track, taking hydrographic, chemical and biological measurements. The rest of the cruises, which take place generally within the standard cruise region defined by a set track, are for the deployment and recovery of moored equipment and towing of a SeaSoar. Detailed description of ADCP hardware, the AutoADCP data acquisition system, and the collection of navigation and compass data on the Thompson is documented in Section 2. Followed by data collection for each cruise together with a cruise track, Section 3 presents the processing and analysis of velocity and acoustic backscatter intensity data. Section 5 shows results of profile quality diagnosis.

  12. Hake Survey ADCP (2001)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Shipboard acoustic Doppler current profiler data collected during the Integrated Acoustic and Trawl Surveys of Pacific Hake. Processing by: Stephen Pierce, Oregon...

  13. Hake Survey ADCP (1995)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Shipboard acoustic Doppler current profiler data collected during the Integrated Acoustic and Trawl Surveys of Pacific Hake. Processing by: Stephen Pierce, Oregon...

  14. Hake Survey ADCP (2005)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Shipboard acoustic Doppler current profiler data collected during the Integrated Acoustic and Trawl Surveys of Pacific Hake. Processing by: Stephen Pierce, Oregon...

  15. Hake Survey ADCP (1998)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Shipboard acoustic Doppler current profiler data collected during the Integrated Acoustic and Trawl Surveys of Pacific Hake. Processing by: Stephen Pierce, Oregon...

  16. Analysis on the Circulation of the Yangtze River Estuary Based on ADCP Measurements

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    According to analysis on field data obtained by ADCP (Acoustic Doppler Current Profiler), the flow regime of the Yangtze River Estuary is studied by use of a 3-D numerical model. The flow field characteristics, under the influence of Coriolis force, saltwater intrusion and freshwater inflow and tidal current interaction, are depicted in details. The main driving forces and some important effective factors of lateral, longitudinal and horizontal circulation are also analyzed.

  17. Evaluation of Acoustic Doppler Current Profiler to Measure Discharge at New York Power Authority's Niagara Power Project, Niagara Falls, New York

    Science.gov (United States)

    Zajd, Henry J.

    2007-01-01

    The need for accurate real-time discharge in the International Niagara River hydro power system requires reliable, accurate and reproducible data. The U.S. Geological Survey has been widely using Acoustic Doppler Current Profilers (ADCP) to accurately measure discharge in riverine channels since the mid-1990s. The use of the ADCP to measure discharge has remained largely untested at hydroelectric-generation facilities such as the New York Power Authority's (NYPA) Niagara Power Project in Niagara Falls, N.Y. This facility has a large, engineered diversion channel with the capacity of high volume discharges in excess of 100,000 cubic feet per second (ft3/s). Facilities such as this could benefit from the use of an ADCP, if the ADCP discharge measurements prove to be more time effective and accurate than those obtained from the flow-calculation techniques that are currently used. Measurements of diversion flow by an ADCP in the 'Pant Leg' diversion channel at the Niagara Power Project were made on November 6, 7, and 8, 2006, and compared favorably (within 1 percent) with those obtained concurrently by a conventional Price-AA current-meter measurement during one of the ADCP measurement sessions. The mean discharge recorded during each 2-hour individual ADCP measurement session compared favorably with (3.5 to 6.8 percent greater than) the discharge values computed by the flow-calculation method presently in use by NYPA. The use of ADCP technology to measure discharge could ultimately permit increased power-generation efficiency at the NYPA Niagara Falls Power Project by providing improved predictions of the amount of water (and thus the power output) available.

  18. Acoustic Doppler current profiling from the JGOFS Arabian Sea cruises aboard the RV T.G. THOMPSON: TN043, January 8, 1995--February 4, 1995; TN044, February 8, 1995--February 25, 1995; TN045, March 14, 1995--April 10, 1995; TN046, April 14, 1995--April 29, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, C.N.; Kim, H.S.; Shi, Y.

    1995-09-01

    Acoustic Doppler current profiler (ADCP) data from the R/V T.G. THOMPSON is part of the core data for the US JGOFS Arabian Sea project along with hydrographic and nutrient data. Seventeen cruises on the THOMPSON are scheduled to take place between September 1994 and January 1996. This is the second in a series of data reports covering the ADCP data from the Arabian Sea JGOFS cruises TNO43 through TNO46. ADCP data are being collected on all the JGOFS Arabian Sea cruises using an autonomous data acquisition system developed for ship-of-opportunity cruises. This system, referred to as the AutoADCP, makes it possible to collect the ADCP data without the constant monitoring usually necessary and assures constant data coverage and uniform data quality. This data report presents ADCP results from the second group of four JGOFS cruises, TNO43 through TNO46, concentrating on the data collection and processing methods. The ADCP data itself reside in a CODAS data base at Brookhaven National Laboratory and is generally available to JGOFS investigators through contact with the authors. The CODAS data base and associated ADCP processing software were developed over a number of years by Eric Firing and his group at the University of Hawaii. The CODAS software is shareware available for PC`s or Unix computers and is the single most widely used ADCP processing program for ship mounted units.

  19. Physical, biological, current, and other data from CTD, XBT, ADCP, bottle casts, net casts, and other instruments from the N. E. Atlantic Ocean in support of the OMEX 1 project from 01 April 1993 to 01 December 1995 (NODC Accession 0000172)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, biological, current, and other data were collected from CTD, XBT, ADCP, bottle casts, net casts, and other instruments from the N. E. Atlantic Ocean in...

  20. Effects of non-homogeneous flow on ADCP data processing in a hydroturbine forebay

    Energy Technology Data Exchange (ETDEWEB)

    Harding, S. F.; Richmond, M. C.; Romero-Gomez, P.; Serkowski, J. A.

    2016-12-01

    Observations of the flow conditions in the forebay of a hydroelectric power station indicate significant regions of non-homogeneous velocities near the intakes and shoreline. The effect of these non-homogeneous regions on the velocity measurement of an acoustic Doppler current profiler (ADCP) is investigated. By using a numerical model of an ADCP operating in a velocity field calculated using computational fluid dynamics (CFD), the errors due to the spatial variation of the flow velocity are identified. The numerical model of the ADCP is referred to herein as a Virtual ADCP (VADCP). Two scenarios are modeled in the numerical analyses presented. Firstly the measurement error of the VADCP is calculated for a single instrument adjacent to the short converging intake of the powerhouse. Secondly, the flow discharge through the forebay is estimated from a transect of VADCP instruments at dif- ferent distances from the powerhouse. The influence of instrument location and orientation are investigated for both cases. A velocity error of over up to 94% of the reference velocity is calculated for a VADCP modeled adjacent to an operating intake. Qualitative agreement is observed between the calculated VADCP velocities and reference velocities by an offset of one intake height upstream of the powerhouse.

  1. A modified beam-to-earth transformation to measure short-wavelength internal waves with an acoustic Doppler current profiler

    Science.gov (United States)

    Scotti, A.; Butman, B.; Beardsley, R.C.; Alexander, P.S.; Anderson, S.

    2005-01-01

    The algorithm used to transform velocity signals from beam coordinates to earth coordinates in an acoustic Doppler current profiler (ADCP) relies on the assumption that the currents are uniform over the horizontal distance separating the beams. This condition may be violated by (nonlinear) internal waves, which can have wavelengths as small as 100-200 m. In this case, the standard algorithm combines velocities measured at different phases of a wave and produces horizontal velocities that increasingly differ from true velocities with distance from the ADCP. Observations made in Massachusetts Bay show that currents measured with a bottom-mounted upward-looking ADCP during periods when short-wavelength internal waves are present differ significantly from currents measured by point current meters, except very close to the instrument. These periods are flagged with high error velocities by the standard ADCP algorithm. In this paper measurements from the four spatially diverging beams and the backscatter intensity signal are used to calculate the propagation direction and celerity of the internal waves. Once this information is known, a modified beam-to-earth transformation that combines appropriately lagged beam measurements can be used to obtain current estimates in earth coordinates that compare well with pointwise measurements. ?? 2005 American Meteorological Society.

  2. Implementation of a Novel Algorithm on Acoustic Doppler Current Profiler Signal Processing System

    Institute of Scientific and Technical Information of China (English)

    ZHU Hao; LIU Wenyao

    2005-01-01

    Acoustic Doppler current profiler (ADCP) uses acoustic energy directed along narrow beams for current measurement. In conventional method, the quantity of sampling affects the precision of fast Fourier transform (FFT) algorithm, and the algorithm needs a large amount of data to process. A novel frequency estimator,enhanced least mean square (ELMS) algorithm for a single complex sinusoid in complex white Gaussian noise, is proposed in ADCP system. As sampling frequency equals 120 krad/s and the sampling number equals 240, the minimum resolving is 0.5 krad/s. All variances keep 11.11%. ELMS algorithm needs less data than FFT. And the robust algorithm can estimate the spectrum true value to 99.9% when the signal to noise ratio (SNR) is equal to 0 dB. Experiments prove that the estimation values will diverge much from the ideal when SNR is less than -6 dB.

  3. From mobile ADCP to high-resolution SSC: a cross-section calibration tool

    Science.gov (United States)

    Boldt, Justin A.

    2015-01-01

    Sediment is a major cause of stream impairment, and improved sediment monitoring is a crucial need. Point samples of suspended-sediment concentration (SSC) are often not enough to provide an understanding to answer critical questions in a changing environment. As technology has improved, there now exists the opportunity to obtain discrete measurements of SSC and flux while providing a spatial scale unmatched by any other device. Acoustic instruments are ubiquitous in the U.S. Geological Survey (USGS) for making streamflow measurements but when calibrated with physical sediment samples, they may be used for sediment measurements as well. The acoustic backscatter measured by an acoustic Doppler current profiler (ADCP) has long been known to correlate well with suspended sediment, but until recently, it has mainly been qualitative in nature. This new method using acoustic surrogates has great potential to leverage the routine data collection to provide calibrated, quantitative measures of SSC which hold promise to be more accurate, complete, and cost efficient than other methods. This extended abstract presents a method for the measurement of high spatial and temporal resolution SSC using a down-looking, mobile ADCP from discrete cross-sections. The high-resolution scales of sediment data are a primary advantage and a vast improvement over other discrete methods for measuring SSC. Although acoustic surrogate technology using continuous, fixed-deployment ADCPs (side-looking) is proven, the same methods cannot be used with down-looking ADCPs due to the fact that the SSC and particle-size distribution variation in the vertical profile violates theory and complicates assumptions. A software tool was developed to assist in using acoustic backscatter from a down-looking, mobile ADCP as a surrogate for SSC. This tool has a simple graphical user interface that loads the data, assists in the calibration procedure, and provides data visualization and output options. This tool

  4. 基于ADCP测量的海浪方向谱研究%ADCP based direction spectrum estimation

    Institute of Scientific and Technical Information of China (English)

    屈茜; 彭东立; 朱安珏

    2013-01-01

    海洋方向谱的研究对于海洋预报、海上建设等人类海洋活动有重要的意义。介绍了一种利用声学多普勒流速剖面仪(Acoustic Doppler Current Profiler, ADCP)测量海浪方向谱的方法。通过计算ADCP测量的流速之间的交叉谱,利用最大似然算法可以得到海浪的方向谱。给出了利用 ADCP 估计方向谱的算法流程,进行了仿真,结果表明所提出的方法可以较准确地估计海浪方向谱。%Measurements of ocean directional spectrum have significant impact on marine forecasting, marine con-struction and other human maritime activities. A method of measuring the directional spectrum by using the Acoustic Doppler Current Profiler (ADCP) is presented in this paper. Calculating the cross spectrum between the wave hight and the current velocity measured by ADCP and using the maximum likelihood algorithm (MLM) can derive the ocean directianl spectrum. The flowchat of the algorithm and the simulation result with this method are given, which shows that the algorithm can rather correctly estimate the ocean directional spectrum.

  5. Acoustic Doppler current profiler measurements in coastal and estuarine environments: examples from the Tay Estuary, Scotland

    Science.gov (United States)

    Wewetzer, Silke F. K.; Duck, Robert W.; Anderson, James M.

    1999-08-01

    Acoustic Doppler current profilers (ADCPs) provide a means to measure the components of water current velocities in three dimensions. Such instruments have been used widely by the oil industry in deep offshore waters but their application to nearshore coastal and estuarine environments has been principally confined to the USA. Using examples of ADCP datasets acquired from the macrotidal Tay Estuary, eastern Scotland, the principles of field deployment, data acquisition and forms of output are critically summarised. It is shown, for the first time in the Tay Estuary, that vertical current velocities are significant and are particularly so in downwelling zones associated with the development and passage of axially convergent tidal fronts. The improved understanding of three-dimensional water and suspended sediment dynamics in coastal and estuarine waters is crucial to, inter alia, the sustainable management of effluent discharges and, in more general terms, it is predicted on the basis of the Tay case study, that ADCP measurements afford significant opportunities to refine understanding of geomorphological processes in a variety of aquatic environments worldwide.

  6. Repeated surveys by acoustic Doppler current profiler for flow and sediment dynamics in a tidal river

    Science.gov (United States)

    Dinehart, R. L.; Burau, J. R.

    2005-11-01

    A strategy of repeated surveys by acoustic Doppler current profiler (ADCP) was applied in a tidal river to map velocity vectors and suspended-sediment indicators. The Sacramento River at the junction with the Delta Cross Channel at Walnut Grove, California, was surveyed over several tidal cycles in the Fall of 2000 and 2001 with a vessel-mounted ADCP. Velocity profiles were recorded along flow-defining survey paths, with surveys repeated every 27 min through a diurnal tidal cycle. Velocity vectors along each survey path were interpolated to a three-dimensional Cartesian grid that conformed to local bathymetry. A separate array of vectors was interpolated onto a grid from each survey. By displaying interpolated vector grids sequentially with computer animation, flow dynamics of the reach could be studied in three-dimensions as flow responded to the tidal cycle. Velocity streamtraces in the grid showed the upwelling of flow from the bottom of the Sacramento River channel into the Delta Cross Channel. The sequential display of vector grids showed that water in the canal briefly returned into the Sacramento River after peak flood tides, which had not been known previously. In addition to velocity vectors, ADCP data were processed to derive channel bathymetry and a spatial indicator for suspended-sediment concentration. Individual beam distances to bed, recorded by the ADCP, were transformed to yield bathymetry accurate enough to resolve small bedforms within the study reach. While recording velocity, ADCPs also record the intensity of acoustic backscatter from particles suspended in the flow. Sequential surveys of backscatter intensity were interpolated to grids and animated to indicate the spatial movement of suspended sediment through the study reach. Calculation of backscatter flux through cross-sectional grids provided a first step for computation of suspended-sediment discharge, the second step being a calibrated relation between backscatter intensity and sediment

  7. ADCP application for long-term monitoring of coastal water

    Institute of Scientific and Technical Information of China (English)

    YOSHIOKA Hiroshi; TAKAYAMA Tomotsuka; SERIZAWA Shigeatsu

    2005-01-01

    Three kind of application of ADCP is reported for long-term monitoring in coastal sea.(1)The rourine monitoring of water qualities.The water quality and ADCP echo data (600 kHz) observed in the long-term are analgzed at MT (Marine Tower) Station of Kansai International Airport in the Osaka Bay, Japan. The correlation between the turbidity and echo intensity in the surface layer is not good because air bubbles generated by breaking wave are not detected by the turbidity meter, but detected well by ADCP. When estimating the turbidity consists of plankton population from echo intensity, the effect ofbubbles have to be eliminated. (2) Monitoring stirring up of bottom sediment. The special observation was carded out by using following two ADCP in the Osaka Bay, One ADCP was installed upward on the sea. The other ADCP was hanged downward at the gate type stand about 3 m above from the bottom. At the spring tide, high echo intensities indicating the stirring up of bottom sediment were observed. (3) The monitoring for the boundary condition of water mixing at an estuary. In summer season, the ADCP was set at the mouth of Tanabe Bay in Wakayama Prefecture, Japan.During the observation, water temperature near the bottom showed remarkable falls with interval of about 5~7 d. When the bottom temperature fell, the inflow current with low echo intensity water appears at the bottom layer in the ADCP record. It is concluded that when occasional weak northeast wind makes weak coastal upwelling at the mouth of the bay, the combination of upwelling with internal tidal flow causes remarkable water exchange and dispels the red tide.

  8. Coupled penetrometer, MBES and ADCP assessments of tidal variations of the surface sediment layer along active subaqueous dunes, Danish Wadden Sea

    DEFF Research Database (Denmark)

    Stark, Nina; Hanff, Henrik; Svenson, Christian

    2011-01-01

    a tidal cycle were compared to mean current velocities (measured using an acoustic Doppler current profiler, ADCP), high-resolution bathymetry (based on multibeam echo sounding, MBES) and qualitative estimates of suspended sediment distributions in the water column (estimated from ADCP backscatter......). Furthermore, this layer showed a significant increase in thickness (e.g. from 8 cm to 16 cm) related to periods of overall deposition. These findings imply that dynamic penetrometers can conveniently serve to (1) quantify potentially mobile sediments by determining the thickness of a loose sediment surface...

  9. Single-ping ADCP measurements in the Strait of Gibraltar

    Science.gov (United States)

    Sammartino, Simone; García Lafuente, Jesús; Naranjo, Cristina; Sánchez Garrido, José Carlos; Sánchez Leal, Ricardo

    2016-04-01

    In most Acoustic Doppler Current Profiler (ADCP) user manuals, it is widely recommended to apply ensemble averaging of the single-pings measurements, in order to obtain reliable observations of the current speed. The random error related to the single-ping measurement is typically too high to be used directly, while the averaging operation reduces the ensemble error of a factor of approximately √N, with N the number of averaged pings. A 75 kHz ADCP moored in the western exit of the Strait of Gibraltar, included in the long-term monitoring of the Mediterranean outflow, has recently served as test setup for a different approach to current measurements. The ensemble averaging has been disabled, while maintaining the internal coordinate conversion made by the instrument, and a series of single-ping measurements has been collected every 36 seconds during a period of approximately 5 months. The huge amount of data has been fluently handled by the instrument, and no abnormal battery consumption has been recorded. On the other hand a long and unique series of very high frequency current measurements has been collected. Results of this novel approach have been exploited in a dual way: from a statistical point of view, the availability of single-ping measurements allows a real estimate of the (a posteriori) ensemble average error of both current and ancillary variables. While the theoretical random error for horizontal velocity is estimated a priori as ˜2 cm s-1 for a 50 pings ensemble, the value obtained by the a posteriori averaging is ˜15 cm s-1, with an asymptotical behavior starting from an averaging size of 10 pings per ensemble. This result suggests the presence of external sources of random error (e.g.: turbulence), of higher magnitude than the internal sources (ADCP intrinsic precision), which cannot be reduced by the ensemble averaging. On the other hand, although the instrumental configuration is clearly not suitable for a precise estimation of turbulent

  10. Acoustic Doppler current profiling from the JGOFS Arabian sea cruises aboard the RV T.G. Thompson

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun-Sook; Flagg, C.N.; Shi, Yan

    1996-06-01

    Acoustic Doppler current profiler (ADCP) data is part of the core data for the U.S. JGOFS Arabian Sea project, along with hydrographic and nutrient data. Seventeen cruises are scheduled to take place between September 1994 and January 1996 on the R/V T.G. Thompson. They are numbered consecutively from the ship`s commissioning with the first JGOFS cruise designated TN039. Table 1 lists start and end dates of each cruise with its mission. All but the first cruise have been or will be staged from Muscat, Oman. Each cruise is scheduled for a duration of between two weeks and one month. Seven of the cruises, referred to as process cruises, follow a standard cruise track, taking hydrographic, chemical and biological measurements. The rest of the cruises, which take place generally within the standard cruise region defined by a set track, are for the deployment and recovery of moored equipments and towing of a SeaSoar. ADCP data are collected using an autonomous data acquisition system developed for ship-of-opportunity cruises, named the AutoADCP system. The system is an extension of RD instrument`s DAS version 2.48 using enhancements made possible with {open_quotes}user-exit{close_quotes} programs. It makes it possible to collect ADCP data without the constant monitoring usually necessary and insures constant data coverage and uniform data quality.

  11. Coupling airborne laser scanning and acoustic Doppler current profiler data to model stream rating curves

    Science.gov (United States)

    Lam, N.; Lyon, S. W.; Kean, J. W.

    2015-12-01

    The rating curve enables the translation of water depth into discharge through a reference cross section. Errors in estimating stream channel geometry can therefore result in increased discharge uncertainty. This study investigates coupling national-scale airborne laser scanning (ALS) and acoustic Doppler current profiler (ADCP) bathymetric survey data for generating stream rating curves. Specifically, stream channel geometries were generated from coupled ALS and ADCP scanning data collected for a well-monitored site located in northern Sweden. These data were used to define the hydraulic geometry required by a physically-based 1-D hydraulic model. The results of our study demonstrate that the effects of potential scanning data errors on the model generated rating curve were less than the uncertainties due to stream gauging measurements and empirical rating curve fitting. Further analysis of the ALS data showed that an overestimation of the streambank elevation (the main scanning data error) was primarily due to vegetation that could be adjusted for through a root-mean-square-error bias correction. We consider these findings encouraging as hydrometric agencies can potentially leverage national-scale ALS and ADCP instrumentation to reduce the cost and effort required for maintaining and establish rating curves at gauging stations.

  12. Bonneville Second Powerhouse Tailrace and High Flow Outfall: ADCP and drogue release field study

    Energy Technology Data Exchange (ETDEWEB)

    Cook, Chris B; Richmond, Marshall C; Guensch, Greg

    2001-03-20

    The Bonneville Project is one of four US Army Corps of Engineers operated dams along the Lower Columbia River. Each year thousands of smelt pass through this Project on their way to the Pacific Ocean. High flow outfalls, if specifically designed for fish passage, are thought to have as good or better smelt survival rates as spillways. To better understand the hydrodynamic flow field around an operating outfall, the Corps of Engineers commissioned measurement of water velocities in the tailrace of the Second Powerhouse. These data also are necessary for proper calibration and verification of three-dimensional numerical models currently under development at PNNL. Hydrodynamic characterization of the tailrace with and without the outfall operating was accomplished through use of a surface drogue and acoustic Doppler current profiler (ADCP). Both the ADCP and drogue were linked to a GPS (global positioning system); locating the data in both space and time. Measurements focused on the area nearest to the high flow outfall, however several ADCP transects and drogue releases were performed away from the outfall to document ambient flow field conditions when the outfall was not operating.

  13. Continuous river discharge monitoring with bottom-mounted current profilers at narrow tidal estuaries

    Science.gov (United States)

    Garel, E.; D'Alimonte, D.

    2017-02-01

    The objective of this study is to verify whether accurate and continuous estimates of freshwater discharge at the mouth of a narrow estuary with a single channel can be obtained from a bottom-mounted current profiler (ADCP). The focus is on moderate- to high-discharge events that significantly affect the water circulation corresponding to low river flow conditions. Observations at the Guadiana Estuary (southern Iberia) indicate lateral subtidal flow variability, constant cross-channel area, and quasi-steady response of the axial velocity to discharge events. Based on the concept of maximum entropy, the mean and maximum channel velocities were related by a constant ratio, Ω, using data from three cross-channel surveys. This relationship was then used to estimate the freshwater discharge at the mouth based on the maximum velocity obtained from the detided ADCP velocity profiles. This approach was possible because the ADCP was deployed near the position of maximum current velocity, that is, over the deepest part of the channel. The results show good correspondence with observations, indicating that the entropy model can complete or substitute the records from upstream gauged stations that do not include the contribution from downstream tributaries. A Multilayer Perceptron neural net (MLP) based on the entropy approach was then implemented with the purpose of estimating the discharge when Ω is unknown. This latter analysis showsthat the relationship between maximum velocity and discharge is quasi-stationary. Consequently, the MLP can successfully estimate freshwater runoff if the training data represent all statistical properties of the river discharge dynamics. The results also indicate that Ω may vary not only with concomitant hydrographic conditions, but also with the recent (i.e., several days prior) discharge magnitude.

  14. extrap: Software to assist the selection of extrapolation methods for moving-boat ADCP streamflow measurements

    Science.gov (United States)

    Mueller, David S.

    2013-04-01

    Selection of the appropriate extrapolation methods for computing the discharge in the unmeasured top and bottom parts of a moving-boat acoustic Doppler current profiler (ADCP) streamflow measurement is critical to the total discharge computation. The software tool, extrap, combines normalized velocity profiles from the entire cross section and multiple transects to determine a mean profile for the measurement. The use of an exponent derived from normalized data from the entire cross section is shown to be valid for application of the power velocity distribution law in the computation of the unmeasured discharge in a cross section. Selected statistics are combined with empirically derived criteria to automatically select the appropriate extrapolation methods. A graphical user interface (GUI) provides the user tools to visually evaluate the automatically selected extrapolation methods and manually change them, as necessary. The sensitivity of the total discharge to available extrapolation methods is presented in the GUI. Use of extrap by field hydrographers has demonstrated that extrap is a more accurate and efficient method of determining the appropriate extrapolation methods compared with tools currently (2012) provided in the ADCP manufacturers' software.

  15. Moored ADCP current data from deployment 2 of the Multi-disciplinary Ocean Sensors for Environmental Analyses and Networks (MOSEAN) project north of Hawaii 2004-2005 (NODC Accession 0116094)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — ADCP data were collected by sensors from seven deployments within 2004-2007 on the HALE-ALOHA mooring, a location about 100 km north of Oahu, Hawaii, USA. The...

  16. Measurement and Analysis of Coherent Flow Structures over Sand Dunes in the Missouri River near St. Louis, MO, by means of an Acoustic Doppler Current Profiler and a Multibeam Echo Sounder

    Science.gov (United States)

    Boldt, J.; Oberg, K. A.; Best, J. L.; Parsons, D. R.

    2011-12-01

    The topology, magnitude, and sediment transport capabilities of large-scale turbulence generated over alluvial sand dunes is influential in creating and maintaining dune morphology and in dominating both the flow field and the transport of suspended sediment above dune-covered beds. Combined measurements by means of an acoustic Doppler current profiler (ADCP) and a multibeam echo sounder (MBES) were made in order to examine flow over a series of sand dunes in the Missouri River, near St. Louis, MO, USA in October 2007. The bed topography of the Missouri River was mapped using a RESON 7125 MBES immediately before the ADCP data collection. Time series of velocity and acoustic backscatter were measured using a down-looking 1200 kHz ADCP while anchored at two locations in the dune field. The ADCP used in this study has a sampling rate of 2-3 Hz with 20-25 cm bin sizes. Two time series were collected having durations of 712 and 589 seconds at one location, while the third time series, collected about 4 meters upstream, was 2,270 seconds in duration. Measured streamwise velocities ranged from 0.1 to 2.7 ms-1 for all three stationary time series. Sediment concentration profiles were obtained at the same two locations as the stationary ADCP data using a P-61 sediment sampler and were compared to ADCP acoustic backscatter. Characteristics of turbulent flow structures in a sand bed river are presented. This paper presents data that can be used to investigate the issue of obtaining reliable estimates of turbulence parameters with an ADCP. The analyses will include mean velocity profiles, turbulence intensities, Reynolds shear stresses, quadrant analysis, power spectra, cross-correlation, and frequency analysis. Semi-periodic patterns were observed in each time series, characterized by periods of elevated acoustic backscatter with positive vertical velocities, followed by reduced acoustic backscatter with negative vertical velocities. The utility and limitations of combined

  17. Acoustic Doppler Current Profiler Measurements in the Tailrace at John Day Dam

    Energy Technology Data Exchange (ETDEWEB)

    Cook, Chris B.; Dibrani, Berhon; Serkowski, John A.; Richmond, Marshall C.; Titzler, P. Scott; Dennis, Gary W.

    2006-01-30

    Acoustic Doppler current profilers (ADCPs) were used to measure water velocities in the tailrace at John Day Dam over a two-week period in February 2005. Data were collected by the Pacific Northwest National Laboratory for the Hydraulic Design Section, Portland District, U.S. Army Corps of Engineers (USACE). The objective of this project was therefore to collect field measurements of water velocities in the near-field draft tube exit zone as well as the far-field tailrace to be used for improving these models. Field data were collected during the project using five separate ADCPs. Mobile ADCP data were collected using two ADCPs mounted on two separate boats. Data were collected by either holding the boat on-station at pre-defined locations for approximately 10 minutes or in moving transect mode when the boat would move over large distances during the data collection. Results from the mobile ADCP survey indicated a complex hydrodynamic flow field in the tailrace downstream of John Day Dam. A large gyre was noted between the skeleton section of the powerhouse and non-spilling portion of the spillway. Downstream of the spillway, the spillway flow is constrained against the navigation lock guide wall, and large velocities were noted in this region. Downstream of the guide wall, velocities decreased as the spillway jet dispersed. Near the tailrace island, the flow split was measured to be approximately equal on Day 2 (25.4 kcfs spillway/123 kcfs total). However, approximately 60% of the flow passed along the south shore of the island on Day 1 (15.0 kcfs spillway/150 kcfs total). At a distance of 9000 ft downstream of the dam, flows had equalized laterally and were generally uniform over the cross section. The collection of water velocities near the draft tube exit of an operating turbine unit is not routine, and equipment capable of measuring 3D water velocities in these zones are at the forefront of hydraulic measurement technology. Although the feasibility of

  18. Quantifying acoustic doppler current profiler discharge uncertainty: A Monte Carlo based tool for moving-boat measurements

    Science.gov (United States)

    Mueller, David S.

    2017-01-01

    This paper presents a method using Monte Carlo simulations for assessing uncertainty of moving-boat acoustic Doppler current profiler (ADCP) discharge measurements using a software tool known as QUant, which was developed for this purpose. Analysis was performed on 10 data sets from four Water Survey of Canada gauging stations in order to evaluate the relative contribution of a range of error sources to the total estimated uncertainty. The factors that differed among data sets included the fraction of unmeasured discharge relative to the total discharge, flow nonuniformity, and operator decisions about instrument programming and measurement cross section. As anticipated, it was found that the estimated uncertainty is dominated by uncertainty of the discharge in the unmeasured areas, highlighting the importance of appropriate selection of the site, the instrument, and the user inputs required to estimate the unmeasured discharge. The main contributor to uncertainty was invalid data, but spatial inhomogeneity in water velocity and bottom-track velocity also contributed, as did variation in the edge velocity, uncertainty in the edge distances, edge coefficients, and the top and bottom extrapolation methods. To a lesser extent, spatial inhomogeneity in the bottom depth also contributed to the total uncertainty, as did uncertainty in the ADCP draft at shallow sites. The estimated uncertainties from QUant can be used to assess the adequacy of standard operating procedures. They also provide quantitative feedback to the ADCP operators about the quality of their measurements, indicating which parameters are contributing most to uncertainty, and perhaps even highlighting ways in which uncertainty can be reduced. Additionally, QUant can be used to account for self-dependent error sources such as heading errors, which are a function of heading. The results demonstrate the importance of a Monte Carlo method tool such as QUant for quantifying random and bias errors when

  19. A PRELIMINARY STUDY ON SUSPENDED SEDIMENT CONCENTRATION MEASUREMENTS USING AN ADCP MOUNTED ON A MOVING VESSEL

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A DR300 Broad Band ADCP mounted on a vessel moving at a speed of 2-3 m/s was used to measure the profile of suspended sediment concentrations (SSCs) at the entrance to Jiaozhou Bay, Shandong Peninsula, where the water is characterized by low SSCs. The echo intensity data produced by the ADCP were regressed against the SSCs derived using the filtration method. The results show that the calibrated relationship can be used to calculate the SSC, with a relative error of 30%. Therefore, it is feasible to measure the SSC (even if the concentration is low) using the ADCP mounted on a moving vessel. Compared with OBS, ABS and other instruments for SSC measurements, the ADCP represents a potentially powerful tool to retrieve SSC data in continental shelf waters.

  20. Estimating suspended solids concentrations from backscatter intensity measured by acoustic Doppler current profiler in San Francisco Bay, California

    Science.gov (United States)

    Gartner, J.W.

    2004-01-01

    The estimation of mass concentration of suspended solids is one of the properties needed to understand the characteristics of sediment transport in bays and estuaries. However, useful measurements or estimates of this property are often problematic when employing the usual methods of determination from collected water samples or optical sensors. Analysis of water samples tends to undersample the highly variable character of suspended solids, and optical sensors often become useless from biological fouling in highly productive regions. Acoustic sensors, such as acoustic Doppler current profilers that are now routinely used to measure water velocity, have been shown to hold promise as a means of quantitatively estimating suspended solids from acoustic backscatter intensity, a parameter used in velocity measurement. To further evaluate application of this technique using commercially available instruments, profiles of suspended solids concentrations are estimated from acoustic backscatter intensity recorded by 1200- and 2400-kHz broadband acoustic Doppler current profilers located at two sites in San Francisco Bay, California. ADCP backscatter intensity is calibrated using optical backscatterance data from an instrument located at a depth close to the ADCP transducers. In addition to losses from spherical spreading and water absorption, calculations of acoustic transmission losses account for attenuation from suspended sediment and correction for nonspherical spreading in the near field of the acoustic transducer. Acoustic estimates of suspended solids consisting of cohesive and noncohesive sediments are found to agree within about 8-10% (of the total range of concentration) to those values estimated by a second optical backscatterance sensor located at a depth further from the ADCP transducers. The success of this approach using commercially available Doppler profilers provides promise that this technique might be appropriate and useful under certain conditions in

  1. Evaluation of ADCP apparent bed load velocity in a large sand-bed river: Moving versus stationary boat conditions

    Science.gov (United States)

    Jamieson, E.C.; Rennie, C.D.; Jacobson, R.B.; Townsend, R.D.

    2011-01-01

    Detailed mapping of bathymetry and apparent bed load velocity using a boat-mounted acoustic Doppler current profiler (ADCP) was carried out along a 388-m section of the lower Missouri River near Columbia, Missouri. Sampling transects (moving boat) were completed at 5- and 20-m spacing along the study section. Stationary (fixed-boat) measurements were made by maintaining constant boat position over a target point where the position of the boat did not deviate more than 3 m in any direction. For each transect and stationary measurement, apparent bed load velocity (vb) was estimated using ADCP bottom tracking data and high precision real-time kinematic (RTK) global positioning system (GPS). The principal objectives of this research are to (1) determine whether boat motion introduces a bias in apparent bed load velocity measurements; and (2) evaluate the reliability of ADCP bed velocity measurements for a range of sediment transport environments. Results indicate that both high transport (vb>0.6 m/s) and moving-boat conditions (for both high and low transport environments) increase the relative variability in estimates of mean bed velocity. Despite this, the spatially dense single-transect measurements were capable of producing detailed bed velocity maps that correspond closely with the expected pattern of sediment transport over large dunes. ?? 2011 American Society of Civil Engineers.

  2. Correcting acoustic Doppler current profiler discharge measurements biased by sediment transport

    Science.gov (United States)

    Mueller, D.S.; Wagner, C.R.

    2007-01-01

    A negative bias in discharge measurements made with an acoustic Doppler current profiler (ADCP) is attributed to the movement of sediment on or near the streambed, and is an issue widely acknowledged by the scientific community. The integration of a differentially corrected global positioning system (DGPS) to track the movement of the ADCP can be used to avoid the systematic bias associated with a moving bed. DGPS, however, cannot provide consistently accurate positions because of multipath errors and satellite signal reception problems on waterways with dense tree canopy along the banks, in deep valleys or canyons, and near bridges. An alternative method of correcting for the moving-bed bias, based on the closure error resulting from a two-way crossing of the river, is presented. The uncertainty in the mean moving-bed velocity measured by the loop method is shown to be approximately 0.6cm/s. For the 13 field measurements presented, the loop method resulted in corrected discharges that were within 5% of discharges measured utilizing DGPS to compensate for moving-bed conditions. ?? 2007 ASCE.

  3. WHOI MVCO 12m Node ADCP SOS

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Wave observations from the 12m node ADCP in the Martha's Vineyard Coastal Observatory (MVCO) in the northwest Atlantic in coastal waters of North America. Extensive,...

  4. Integrated Monitoring of the Soya Warm Current Using HF Ocean Radars, Satellite Altimeters, Coastal Tide Gauges, and a Bottom-Mounted ADCP

    Science.gov (United States)

    Ebuchi, N.; Fukamachi, Y.; Ohshima, K. I.; Wakatsuchi, M.

    2007-12-01

    The Soya Warm Current (SWC) is a coastal boundary current, which flows along the coast of Hokkaido in the Sea of Okhotsk. The SWC flows into the Sea of Okhotsk from the Sea of Japan through the Soya/La Perouse Strait, which is located between Hokkaido, Japan, and Sakhalin, Russia. It supplies warm, saline water in the Sea of Japan to the Sea of Okhotsk and largely affects the ocean circulation and water mass formation in the Sea of Okhotsk, and local climate, environment and fishery in the region. However, the SWC has never been continuously monitored due to the difficulties involved in field observations related to, for example, severe weather conditions in the winter, political issues at the border strait, and conflicts with fishing activities in the strait. Detailed features of the SWC and its variations have not yet been clarified. In order to monitor variations in the SWC, three HF ocean radar stations were installed around the strait. The radar covers a range of approximately 70 km from the coast. It is shown that the HF radars clearly capture seasonal and subinertial variations of the SWC. The velocity of the SWC reaches its maximum, approximately 1 m/s, in summer, and weakens in winter. The velocity core is located 20 to 30 km from the coast, and its width is approximately 50 km. The surface transport by the Soya Warm Current shows a significant correlation with the sea level difference along the strait, as derived from coastal tide gauge records. The cross-current sea level difference, which is estimated from the sea level anomalies observed by the Jason-1 altimeter and a coastal tide gauge, also exhibits variation in concert with the surface transport and along-current sea level difference.

  5. The Acoustic Properties of Suspended Sediment in Large Rivers: Consequences on ADCP Methods Applicability

    Directory of Open Access Journals (Sweden)

    Massimo Guerrero

    2016-01-01

    Full Text Available The use of echo-levels from Acoustic Doppler Current Profiler (ADCP recordings has become more and more common for estimating suspended bed-material and wash loads in rivers over the last decade. Empirical, semi-empirical and physical-based acoustic methods have been applied in different case studies, which provided relationships between scattering particles features derived from samples (i.e., concentration and grain size and corresponding backscattering strength and sound attenuation. These methods entail different assumptions regarding sediment heterogeneity in the ensonified volume (e.g., particle size distribution (PSD and spatial concentration gradient. Our work was to compare acoustic backscatter and attenuation properties of suspended sediments, sampled in the rivers Parana and Danube that represented rather different hydro-sedimentological conditions during the surveys. The Parana represents a large sandy river, characterized through a huge watershed and the typical bimodal PSD of sediment in suspension, while the Danube represents in the investigated reach an exposed sand-gravel bed and clay-silt particles transported in the water column in suspension. Sand and clay-silt concentrations clearly dominate the analyzed backscattering strength in the rivers Parana and Danube, respectively, with an effect of PSD level of sorting in the latter case. This comparison clarifies the extent of assumptions made, eventually advising on the actual possibility of applying certain ADCP methods, depending on the expected concentration gradients and PSD of suspended sediment to be investigated.

  6. 3-D flow and scour near a submerged wing dike: ADCP measurements on the Missouri River

    Science.gov (United States)

    Jamieson, E.C.; Rennie, C.D.; Jacobson, R.B.; Townsend, R.D.

    2011-01-01

    Detailed mapping of bathymetry and three-dimensional water velocities using a boat-mounted single-beam sonar and acoustic Doppler current profiler (ADCP) was carried out in the vicinity of two submerged wing dikes located in the Lower Missouri River near Columbia, Missouri. During high spring flows the wing dikes become submerged, creating a unique combination of vertical flow separation and overtopping (plunging) flow conditions, causing large-scale three-dimensional turbulent flow structures to form. On three different days and for a range of discharges, sampling transects at 5 and 20 m spacing were completed, covering the area adjacent to and upstream and downstream from two different wing dikes. The objectives of this research are to evaluate whether an ADCP can identify and measure large-scale flow features such as recirculating flow and vortex shedding that develop in the vicinity of a submerged wing dike; and whether or not moving-boat (single-transect) data are sufficient for resolving complex three-dimensional flow fields. Results indicate that spatial averaging from multiple nearby single transects may be more representative of an inherently complex (temporally and spatially variable) three-dimensional flow field than repeated single transects. Results also indicate a correspondence between the location of calculated vortex cores (resolved from the interpolated three-dimensional flow field) and the nearby scour holes, providing new insight into the connections between vertically oriented coherent structures and local scour, with the unique perspective of flow and morphology in a large river.

  7. On Active Current Selection for Lagrangian Profilers

    Directory of Open Access Journals (Sweden)

    J. Jouffroy

    2013-01-01

    Full Text Available Autonomous Lagrangian profilers are now widely used as measurement and monitoring platforms, notably in observation programs as Argo. In a typical mode of operation, the profilers drift passively at their parking depthbefore making a vertical profile to go back to the surface. This paperpresents simple and computationally-efficient control strategies to activelyselect and use ocean currents so that a profiler can autonomously reach adesired destination. After briefly presenting a typical profiler andpossible mechanical modifications for a coastal environment, we introducesimple mathematical models for the profiler and the currents it will use. Wethen present simple feedback controllers that, using the direction of thecurrents and taking into account the configuration of the environment(coastal or deep-sea, is able to steer the profiler to any desiredhorizontal location. To illustrate the approach, a few results are presentedusing both simulated currents and real current velocity profiles from theNorth Sea.

  8. On active current selection for Lagrangian profilers

    DEFF Research Database (Denmark)

    Jouffroy, Jerome; Zhou, Qiuyang; Zielinski, Oliver

    2013-01-01

    simple and computationally-efficient control strategies to actively select and use ocean currents so that a profiler can autonomously reach a desired destination. After briefly presenting a typical profiler and possible mechanical modifications for a coastal environment, we introduce simple mathematical...... models for the profiler and the currents it will use. We then present simple feedback controllers that, using the direction of the currents and taking into account the configuration of the environment (coastal or deep-sea), is able to steer the profiler to any desired horizontal location. To illustrate...... the approach, a few results are presented using both simulated currents and real current velocities from the North Sea....

  9. Currents and other physical parameters collected from moored current meters and various ADCPs offshore the United Kingdom, as part of British Oceanographic Data Center's (BODC) current meter series, from 21 June 1967 to 29 April 2007 (NODC Accession 0067029)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The BODC current meter data set provides all currents data held in the BODC National Oceanographic Database (NODB). It includes entries for Moored Acoustic Doppler...

  10. Temperature profile, dissolved oxygen, phosphate and other measurements collected using bottle, net, CTD casts from the NEW HORIZON, NOAA Ship DAVID STARR JORDAN, ROGER REVELLE in the North East Pacific Ocean as part of the California Cooperative Fisheries Investigation (CALCOFI) project, from 2000-06-29 to 2004-01-20 (NCEI Accession 0002116)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, dissolved oxygen, phosphate and other data were collected using water pumps, SIMBAD radiometer, 150 kHz Acoustic Doppler Current Profiler (ADCP),...

  11. Temporal and spatial variability of ADCP backscatter on a continental slope

    Science.gov (United States)

    Sindlinger, Laurie R.; Biggs, Douglas C.; DiMarco, Steven F.

    2005-01-01

    Previous research has shown that acoustic volume backscatter intensity (ABI) from an acoustic Doppler current profiler (ADCP) can be a proxy for zooplankton and micronekton biomass over time or space. As part of NOAA's Sperm Whale and Acoustic Monitoring Program (SWAMP) and a follow-on ichthyoplankton survey (SEAMAP), a ship-mounted 300-kHz broadband ADCP collected current velocity and ABI data from July to September 2001 in the northeast Gulf of Mexico. The present study sought to compare/contrast the variability in ABI both spatially and temporally using the data obtained from the SWAMP and SEAMAP cruises. The ADCP data were averaged over 2 min and 4 m vertical bins from 16 to 56 m below sea surface. Usually, ABI in this epipelagic realm averaged 3 dB higher at night than during the day because of diel vertical migration of zooplankton and micronekton into these near surface waters, while in a region having cyclonic circulation along the continental margin of the northeast Gulf, ABI averaged 6 dB higher than in an anticyclonic warm filament there. Wet displacement volumes (WDV) were measured using Bongo net tows to estimate that a 6 dB increase in ABI was equivalent to an increase from 9 to 10.5 ml WDV of plankton+micronekton per 100 m 3. Sperm whale abundance has been shown to be positively correlated with regions of locally high ABI, and sperm whale sightings during SWAMP were also compared to our ABI measurements. Spectral and Empirical Orthogonal Function analyses were performed on subsets of the ABI data for which 10-14 day time series were available and showed 2-3 day periodicity near-surface, corresponding to spatial scales of 10 1-10 2 km. During summer 2001, the mesoscale circulation along the subtropical continental margin in the northeastern Gulf was found to be the principal forcing factor for low frequency ABI variation. Increased backscatter observations are also correlated with offshore flow from the continental margin to the deep ocean

  12. High resolution mapping of riffle-pool dynamics based on ADCP and close-range remote sensing data

    Science.gov (United States)

    Salmela, Jouni; Kasvi, Elina; Alho, Petteri

    2017-04-01

    Present development of mobile laser scanning (MLS) and close-range photogrammetry with unmanned aerial vehicle (UAV) enable us to create seamless digital elevation models (DEMs) of the riverine environment. Remote-controlled flow measurement platforms have also improved spatio-temporal resolution of the flow field data. In this study, acoustic Doppler current profiler (ADCP) attached to remote-controlled mini-boat, UAV-based bathymetry and MLS techniques were utilized to create the high-resolution DEMs of the river channel. These high-resolution measurements can be used in many fluvial applications such as computational fluid dynamics, channel change detection, habitat mapping or hydro-electric power plant planning. In this study we aim: 1) to analyze morphological changes of river channel especially riffle and pool formations based on fine-scale DEMs and ADCP measurements, 2) to analyze flow fields and their effect on morphological changes. The interest was mainly focused on reach-scale riffle-pool dynamics within two-year period of 2013 and 2014. The study was performed in sub-arctic meandering Pulmankijoki River located in Northern Finland. The river itself has shallow and clear water and sandy bed sediment. Discharge remains typically below 10 m3s-1 most of the year but during snow melt period in spring the discharge may exceed 70 m3s-1. We compared DEMs and ADCP measurements to understand both magnitude and spatio-temporal change of the river bed. Models were accurate enough to study bed form changes and locations and persistence of riffles and pools. We analyzed their locations with relation to flow during the peak and low discharge. Our demonstrated method has improved significantly spatio-temporal resolution of riverine DEMs compared to other cross-sectional and photogrammetry based models. Together with flow field measurements we gained better understanding of riverbed-water interaction

  13. Measurement of high turbidity water behavior by ADCP at Izena Caldera in Okinawa Trough

    Science.gov (United States)

    Furuta, S.; Arai, R.; Yamazaki, T.

    2012-12-01

    Hydrothermal processes associated with spreading centers of plate-tectonics form hydrothermal activities and the resulted seafloor massive sulfide (SMS) deposits. Given that the SMS deposits found in the western Pacific have been considered to be potential sources of gold, silver, copper, zinc, and lead, there is a strong possibility that they will be mined near future. In order to take measures against environmental impacts during the mining of SMS deposits, it is important to measure components of hydrothermal origin with high temporal and spatial resolution on site, and to understand the mass circulation and transfer systems around the mining area. The Acoustic Doppler Current Profiler (ADCP) is effective tool for measurement of current field in water column in general. In addition, it is also useful for detection of turbidity profile in the water column simultaneously, applying an acoustic propagation model to the data. Izena Caldera, which is 3 km in short, 6 km in long axes and is generically from1,600 m to 1,700 m in depth, is located at the northwest of Okinawa Island. There both attractive SMS deposits and active hydrothermal vent systems have been confirmed. Because of the active vent systems and a bowl-like geographical structure, a quite unique mass circulation and transfer background condition is expected in Izena Caldera. The mining operation will add plenty of suspended materials into the background condition. For a primary understanding of the background condition, the authors analyzed the ADCP data and found two high-turbidity water zones in Izena Caldera and their behavior relationships with the current structure. The vertical downward current affects one of the high-turbidity zones around 1,220 m in depth. The current velocity against north-south direction and east-west direction affects the other high-turbidity zone 1,550 m in depth. Also the zones are recognized the higher synchronization with the lumi-solar diurnal tide, about 24 hours. The

  14. Seasonal Suspended Particles Distribution Patterns in Western South Yellow Sea Based on Acoustic Doppler Current Profiler Observation

    Institute of Scientific and Technical Information of China (English)

    LI Jianchao; LI Guangxue; XU Jishang; QIAO Lulu; DONG Ping; DING Dong; LIU Shidong

    2015-01-01

    An Acoustic Doppler Current Profiler (ADCP) observation site was set up in the Western South Yellow Sea from 2012 to 2013 to study the local suspended particle matters (SPM) distribution pattern. The SPM concentration could be semi-quantitatively represented by backscatter intensity (Sv), converted by the echo intensity (EI) of ADCP. Results show two types of SPM in the water column: the quasi-biological SPM and quasi-mineral SPM. The quasi-biological SPM mainly exists in summer half year and is con-centrated above the thermocline. It has periodically diurnal variations with high concentration at night and low concentration in the daytime. The quasi-mineral SPM is located in lower part of the water column, with similar relation to monthly tidal current variation all year round. However, the daily quasi-mineral SPM distribution patterns vary between summer and winter half year. The sunlight is thought to be the origin factor leading to the diurnally vertical motion of the biological features, which might cause the diurnalSv variation. Unlike in winter half year when tidal current is relatively single driving force of the monthly SPM pattern, the high speed current near the thermocline is also responsible for the concentration of quasi-mineral SPM in summer half year. The sediment input difference between summer and winter half year contribute to the varied daily variation of quasi-mineral SPM with re-suspended SPM in winter and sediments from Yellow Sea Mud Area (YSMA) in summer. The seasonal variations in hydrodynamics, water structure and heavy-wind incidents are the primary factors influencing the differential seasonal SPM distribution patterns.

  15. Temporal characteristics of coherent flow structures generated over alluvial sand dunes, Mississippi River, revealed by acoustic doppler current profiling and multibeam echo sounding

    Science.gov (United States)

    Czuba, John A.; Oberg, Kevin A.; Best, Jim L.; Parsons, Daniel R.; Simmons, S. M.; Johnson, K.K.; Malzone, C.

    2009-01-01

    This paper investigates the flow in the lee of a large sand dune located at the confluence of the Mississippi and Missouri Rivers, USA. Stationary profiles collected from an anchored boat using an acoustic Doppler current profiler (ADCP) were georeferenced with data from a real-time kinematic differential global positioning system. A multibeam echo sounder was used to map the bathymetry of the confluence and provided a morphological context for the ADCP measurements. The flow in the lee of a low-angle dune shows good correspondence with current conceptual models of flow over dunes. As expected, quadrant 2 events (upwellings of low-momentum fluid) are associated with high backscatter intensity. Turbulent events generated in the lower lee of a dune near the bed are associated with periods of vortex shedding and wake flapping. Remnant coherent structures that advect over the lower lee of the dune in the upper portion of the water column, have mostly dissipated and contribute little to turbulence intensities. The turbulent events that occupy most of the water column in the upper lee of the dune are associated with periods of wake flapping.

  16. NODC Standard Product: World Ocean Circulation Program (WOCE) Global Data, Version 2: Acoustic doppler current profilers data on CD-ROM (NODC Accession 0000312)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — World-Wide shipboard current data were collected from ADCP casts from the ALPHA HELIX and other platforms as part of World Ocean Circulation Experiment (WOCE). Data...

  17. Patterns of distribution of sound-scattering zooplankton in warm- and cold-core eddies in the Gulf of Mexico, from a narrowband acoustic Doppler current profiler survey

    Science.gov (United States)

    Zimmerman, Robert A.; Biggs, Douglas C.

    1999-03-01

    The acoustic backscatter intensity (ABI) reflected from epipelagic zooplankton communities in the central Gulf of Mexico was measured during June 1995 with a vessel-mounted, narrowband-153-kHz acoustic Doppler current profiler (ADCP). Horizontal and vertical variations in ABI were documented in three kinds of mesoscale hydrographic features commonly found in the Gulf of Mexico: the warm-core Loop Current (LC), a warm-core Loop Current eddy (LCE), and a cold-core region that separated the two warm-core features. Since new nitrogen domes close to surface waters in cold-core features whereas surface waters of warm-core features are nutrient depleted, the cold-core region was expected to have higher biological stocks as a result of locally higher primary production. Both ABI and net tow data confirmed that the cold-core region was in fact a zone of local aggregation of zooplankton and micronekton. During both day and night, ABI when integrated for the upper 50 and 100 m in the cold-core region was significantly greater than in the LC or in the LCE, and ABI was positively correlated with standing stock biomass taken by the net tows. Further investigations into the biological differences between Gulf of Mexico divergence and convergence regimes are warranted, and the ADCP will be a useful tool for examination of the distribution of sound scatterers in such features.

  18. Deep ocean current profiles, water temperatures, and echo amplitudes from bottom-moored ADCP during 2011-2013 of the Aloha Cabled Observatory (NODC Accession 0123608)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The ALOHA Cabled Observatory (ACO) is a system of hardware and software that extends electric power and the Internet offshore, supporting sustained real-time...

  19. Comparison of bottom-track to global positioning system referenced discharges measured using an acoustic Doppler current profiler

    Science.gov (United States)

    Wagner, C.R.; Mueller, D.S.

    2011-01-01

    A negative bias in discharge measurements made with an acoustic Doppler current profiler (ADCP) can be caused by the movement of sediment on or near the streambed. The integration of a global positioning system (GPS) to track the movement of the ADCP can be used to avoid the systematic negative bias associated with a moving streambed. More than 500 discharge transects from 63 discharge measurements with GPS data were collected at sites throughout the US, Canada, and New Zealand with no moving bed to compare GPS and bottom-track-referenced discharges. Although the data indicated some statistical bias depending on site conditions and type of GPS data used, these biases were typically about 0.5% or less. An assessment of differential correction sources was limited by a lack of data collected in a range of different correction sources and different GPS receivers at the same sites. Despite this limitation, the data indicate that the use of Wide Area Augmentation System (WAAS) corrected positional data is acceptable for discharge measurements using GGA as the boat-velocity reference. The discharge data based on GPS-referenced boat velocities from the VTG data string, which does not require differential correction, were comparable to the discharges based on GPS-referenced boat velocities from the differentially-corrected GGA data string. Spatial variability of measure discharges referenced to GGA, VTG and bottom-tracking is higher near the channel banks. The spatial variability of VTG-referenced discharges is correlated with the spatial distribution of maximum Horizontal Dilution of Precision (HDOP) values and the spatial variability of GGA-referenced discharges is correlated with proximity to channel banks. ?? 2011 Published by Elsevier B.V.

  20. Preliminary physical, nutrients, biological, meteorological, and other data from bottle casts, CTD casts, ADCP casts, moored current meters, and meteorological sensors from the GYRE from as part of the Texas-Louisiana Shelf Circulation and Transport Processes Study (LATEX PART A) from 04 November 1992 to 05 August 1994 (NODC Accession 9500054)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Preliminary physical, nutrients, biological, meteorological, and other data from bottle casts, CTD casts, ADCP casts, and meteorological sensors from the GYRE from...

  1. Temperature, conductivity, pressure, oxygen concentration, beam attenuation, Chlorophyll-a fluorescence, current speed and direction, and particle size distribution collected from moored platform using CTD, ADCP, acoustic Doppler velocimeter, and benthic optical sensors in Monterey Bay from 2011-05-03 to 2012-10-29 (NODC Accession 0123606)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Observational oceanographic data obtained by an autonomous moored CTD profiler, thermistor mooring, acoustic Doppler current profiler, acoustic Doppler velocimeter,...

  2. Application of acoustic-Doppler current profiler and expendable bathythermograph measurements to the study of the velocity structure and transport of the Gulf Stream

    Science.gov (United States)

    Joyce, T. M.; Dunworth, J. A.; Schubert, D. M.; Stalcup, M. C.; Barbour, R. L.

    1988-01-01

    The degree to which Acoustic-Doppler Current Profiler (ADCP) and expendable bathythermograph (XBT) data can provide quantitative measurements of the velocity structure and transport of the Gulf Stream is addressed. An algorithm is used to generate salinity from temperature and depth using an historical Temperature/Salinity relation for the NW Atlantic. Results have been simulated using CTD data and comparing real and pseudo salinity files. Errors are typically less than 2 dynamic cm for the upper 800 m out of a total signal of 80 cm (across the Gulf Stream). When combined with ADCP data for a near-surface reference velocity, transport errors in isopycnal layers are less than about 1 Sv (10 to the 6th power cu m/s), as is the difference in total transport for the upper 800 m between real and pseudo data. The method is capable of measuring the real variability of the Gulf Stream, and when combined with altimeter data, can provide estimates of the geoid slope with oceanic errors of a few parts in 10 to the 8th power over horizontal scales of 500 km.

  3. Acoustic backscatter measurements with a 153 kHz ADCP in the northeastern Gulf of Mexico: determination of dominant zooplankton and micronekton scatterers

    Science.gov (United States)

    Ressler, Patrick H.

    2002-11-01

    A 153 kHz narrowband acoustic Doppler current profiler (ADCP) was used to measure volume backscattering strength ( Sv) during a deepwater oceanographic survey of cetacean and seabird habitat in the northeastern Gulf of Mexico. Sv was positively related to zooplankton and micronekton biomass (wet displacement volume) in 'sea-truth' net hauls made with a 1 m 2 Multiple Opening-Closing Net Environmental Sensing System (MOCNESS). A subset of these MOCNESS tows was used to explore the relationship between the numerical densities of various taxonomic categories of zooplankton and the ADCP backscatter signal. Crustaceans, small fish, and fragments of non-gas-bearing siphonophores in the net samples all showed significant, positive correlations with the acoustic signal, while other types of gelatinous zooplankton, pteropod and atlantid molluscs, and gas-filled siphonophore floats showed no significant correlation with Sv. Previously published acoustic scattering models for zooplankton were used to calculate expected scattering for several general zooplankton types and sizes for comparison with the field data. Even though gelatinous material often made up a large fraction of the total biomass, crustaceans, small fish, and pteropods were most likely the important scatterers. Since only crustacean and small fish densities were significantly correlated with Sv, it is suggested that Sv at 153 kHz can be used as a relative proxy for the abundance of these organisms in the Gulf of Mexico.

  4. extrap: Software to assist the selection of extrapolation methods for moving-boat ADCP streamflow measurements

    Science.gov (United States)

    Mueller, David S.

    2013-01-01

    Selection of the appropriate extrapolation methods for computing the discharge in the unmeasured top and bottom parts of a moving-boat acoustic Doppler current profiler (ADCP) streamflow measurement is critical to the total discharge computation. The software tool, extrap, combines normalized velocity

  5. Mean meridional currents in the central and eastern equatorial Atlantic

    Science.gov (United States)

    Perez, Renellys C.; Hormann, Verena; Lumpkin, Rick; Brandt, Peter; Johns, William E.; Hernandez, Fabrice; Schmid, Claudia; Bourlès, Bernard

    2014-12-01

    Ship-based acoustic Doppler current profiler (ADCP) velocity measurements collected by several major field programs in the tropical Atlantic are averaged and combined with estimates of the mean near-surface velocity derived from drifters and Argo float surface drifts (ADCP+D) to describe the mean cross-equatorial and vertical structure of the meridional currents along 23°W and 10°W. Data from moored ADCPs and fixed-depth current meters, a satellite-derived velocity product, and a global ocean reanalysis were additionally used to evaluate the mean ADCP+D meridional velocity. The dominant circulation features in the long-term mean ADCP+D meridional velocity in the upper 100 m are the tropical cells (TCs) located approximately between 5°S and 5°N, with near-surface poleward flow and subsurface equatorward flow that is stronger and shallower in the northern cell compared to the southern cell. The thickness of the surface limb of the TCs decreases and the northern cell is found to shift further south of the equator from the central to eastern tropical Atlantic. Analysis of two-season means estimated from the ship-based ADCP, near-surface drift, and moored velocity data, as well as the simulated fields, indicates that the maximum poleward velocity in the surface limb of the TCs intensifies during December-May along 23°W largely due to seasonal compensation between the geostrophic and ageostrophic (or wind-driven) components of the meridional velocity, whereas the maximum equatorward flow in the subsurface limb of the northern cell intensifies during June-November along both 23°W and 10°W due to the seasonality of the geostrophic meridional velocity.

  6. Using Principal Component and Tidal Analysis as a Quality Metric for Detecting Systematic Heading Uncertainty in Long-Term Acoustic Doppler Current Profiler Data

    Science.gov (United States)

    Morley, M. G.; Mihaly, S. F.; Dewey, R. K.; Jeffries, M. A.

    2015-12-01

    Ocean Networks Canada (ONC) operates the NEPTUNE and VENUS cabled ocean observatories to collect data on physical, chemical, biological, and geological ocean conditions over multi-year time periods. Researchers can download real-time and historical data from a large variety of instruments to study complex earth and ocean processes from their home laboratories. Ensuring that the users are receiving the most accurate data is a high priority at ONC, requiring quality assurance and quality control (QAQC) procedures to be developed for all data types. While some data types have relatively straightforward QAQC tests, such as scalar data range limits that are based on expected observed values or measurement limits of the instrument, for other data types the QAQC tests are more comprehensive. Long time series of ocean currents from Acoustic Doppler Current Profilers (ADCP), stitched together from multiple deployments over many years is one such data type where systematic data biases are more difficult to identify and correct. Data specialists at ONC are working to quantify systematic compass heading uncertainty in long-term ADCP records at each of the major study sites using the internal compass, remotely operated vehicle bearings, and more analytical tools such as principal component analysis (PCA) to estimate the optimal instrument alignments. In addition to using PCA, some work has been done to estimate the main components of the current at each site using tidal harmonic analysis. This paper describes the key challenges and presents preliminary PCA and tidal analysis approaches used by ONC to improve long-term observatory current measurements.

  7. Coupled penetrometer, MBES and ADCP assessments of tidal variations in surface sediment layer characteristics along active subaqueous dunes, Danish Wadden Sea

    Science.gov (United States)

    Stark, Nina; Hanff, Hendrik; Svenson, Christian; Ernstsen, Verner B.; Lefebvre, Alice; Winter, Christian; Kopf, Achim

    2011-08-01

    In-situ geotechnical measurements of surface sediments were carried out along large subaqueous dunes in the Knudedyb tidal inlet channel in the Danish Wadden Sea using a small free-falling penetrometer. Vertical profiles showed a typical stratification pattern with a resolution of ˜1 cm depicting a thin surface layer of low sediment strength and a stiffer substratum below (quasi-static bearing capacity equivalent: 1-3 kPa in the top layer, 20-140 kPa in the underlying sediment; thickness of the top layer ca. 5-8 cm). Observed variations in the thickness and strength of the surface layer during a tidal cycle were compared to mean current velocities (measured using an acoustic Doppler current profiler, ADCP), high-resolution bathymetry (based on multibeam echo sounding, MBES) and qualitative estimates of suspended sediment distributions in the water column (estimated from ADCP backscatter intensity). The results revealed an ebb dominance in sediment remobilization, and a general accretion of the bed towards low water. A loose top layer occurred throughout the tidal cycle, likely influenced by bedload transport and small events of suspended sediment resettlement (thickness: 6 ± 2 cm). Furthermore, this layer showed a significant increase in thickness (e.g. from 8 cm to 16 cm) related to periods of overall deposition. These findings imply that dynamic penetrometers can conveniently serve to (1) quantify potentially mobile sediments by determining the thickness of a loose sediment surface layer, (2) unravel sediment strength development in potentially mobile sediments and (3) identify sediment accumulation. Such data are an important complement and add a new geotechnical perspective during investigations of sediment remobilization processes in highly dynamic coastal environments.

  8. Velocity profiles of turbidity currents flowing over a flat bed

    OpenAIRE

    Kikura, H.; Murakawa, H.; Tasaka, Y.; Chamoun, Sabine; De Cesare, Giovanni; Schleiss, Anton

    2016-01-01

    Turbidity currents are the main source of suspended sediment transport in reservoirs and thus one of the main causes of sedimentation. One of the techniques used to avoid reservoir sedimentation is through venting of turbidity currents. In the framework of a research work on venting, velocity measurements of turbidity currents flowing on a flat bed are carried out using Ultrasonic Velocity Profilers (UVP). Five profilers of 4 MHz placed at different positions in an experimental flume provide ...

  9. Controllability of driven current profile in ECCD on ITER

    Energy Technology Data Exchange (ETDEWEB)

    Hamamatsu, K.; Fukuyama, A

    2001-01-01

    The controllability of current profile driven by the fundamental resonance of the O-mode wave is examined for the parameters of the Intermediate Aspect ratio Machine option of the International Thermonuclear Experimental Reactor (ITER). The driven current is numerically evaluated by using the full relativistic adjoint method which we have extended from the non-relativistic one. By changing both the toroidal and poloidal injection angles, the optimum direction to drive a current with maximum current density at the aimed position is obtained. The position of wave launching affects the optimum injection angles and the driven current profile. The dependence of driven current profile on beam divergence is also examined. When the beam is injected from the equatorial plane, the maximum current density is reduced and the width of current profile becomes wide in the outer region of r{>=}0.5a. The localized current profile is kept well within the region of r{>=}0.4a by injection from a location away from the equatorial plane.

  10. Recent results on current profile shaping on tore supra

    Energy Technology Data Exchange (ETDEWEB)

    Becoulet, A.

    1994-12-31

    The link between the current profile and the confinement is studied, involving various regimes: high power minority ion cyclotron resonant heating, high power lower hybrid current drive, fast wave direct electron heating and current drive and pellet enhanced performance. It is shown that the electron heat diffusivity decreases when the magnetic shear increases in the confinement zone and/or when it decreases in the plasma centre. (authors). 13 refs., 6 figs.

  11. Acoustic Doppler Current Profiler observations in the southern Caspian Sea: shelf currents and flow field off Freidoonkenar Bay, Iran

    Directory of Open Access Journals (Sweden)

    P. Ghaffari

    2009-12-01

    Full Text Available The results of offshore bottom-mounted ADCP measurements and wind records carried out from August to September 2003 in the coastal waters off Freidoonkenar Bay (FB in the south Caspian Sea (CS are examined in order to characterize the shelf motion, the steady current field and to determine the main driving forces of currents on the study area. Owing to closed basin and absence of the astronomical tide, the atmospheric forcing plays an important role in the flow field of the CS. The lasting regular sea breeze system is present almost throughout the year that performs motive force in diurnal and semi-diurnal bands similar to tides in other regions. In general, current field in the continental shelf could be separated into two distinguishable schemes, which in cross-shelf direction is dominated by high frequencies (1 cpd and higher frequencies, and in along-shelf orientation mostly proportional to lower frequencies in synoptic weather bands. Long-period wave currents, whose velocities are much greater than those of direct wind-induced currents, are dominating the current field in the continental shelf off FB. The propagation of the latter could be described in terms of shore-controlled waves that are remotely generated and travel across the shelf in the southern CS. It has also been shown that long term displacements in this area follow the classic cyclonic, circulation pattern in the southern CS.

  12. Acoustic Doppler Current Profiler observations in the southern Caspian Sea: shelf currents and flow field off Feridoonkenar Bay, Iran

    Directory of Open Access Journals (Sweden)

    P. Ghaffari

    2010-07-01

    Full Text Available The results of offshore bottom-mounted ADCP measurements and wind records carried out from August to September 2003 in the coastal waters off Feridoon-kenar Bay (FB in the south Caspian Sea (CS are examined in order to characterize the shelf motion, the steady current field and to determine the main driving forces of currents on the study area. Owing to closed basin and absence of the astronomical tide, the atmospheric forcing plays an important role in the flow field of the CS. The lasting regular sea breeze system is present almost throughout the year. This system performs the forcing in diurnal and semi-diurnal bands similar to tides in other regions. In general, current field in the continental shelf could be separated into two distinguishable schemes, which in cross-shelf direction is dominated by high frequencies (1 cpd and higher frequencies, and in along-shelf orientation mostly proportional to lower frequencies in synoptic weather bands. Long-period wave currents, whose velocities are much greater than those of direct wind-induced currents, dominates the current field in the continental shelf off FB. The propagation of the latter could be described in terms of shore-controlled waves that are remotely generated and travel across the shelf in the southern CS. It has also been shown that long term displacements in this area follow the classic cyclonic, circulation pattern in the southern CS.

  13. Examining the plankton acoustic response with a vessel mounted ADCP across oceanic fronts located in the Drake Passage

    Directory of Open Access Journals (Sweden)

    Silvia Blanc

    2008-12-01

    Full Text Available On December 2001 and January 2006, during the LMG01-9 and LMG06-1 cruises to Antarctic Peninsula, at-sea oceanographic and acoustic measurements were conducted onboard the R/V L. M. Gould icebreaker along two transects located between (55.15 °S, 65 ºW and (64.65 °S, 65 ºW and between (55.15 ºS, 64.91 ºW and (62.7 ºS, 62.21 ºW, respectively. The scientific crew consisted of researchers from two US institutes, and a scientific observer from the Argentinean Naval Service of Research & Development under the frame of the US National Science Foundation Antarctic Program. The present work accomplishes an alternative application for a vesselmounted Acoustic Doppler Current Profiler (ADCP with an operating frequency of 153.6 kHz. Volume Acoustic Backscattering Strengths, S V, were computed from the recorded ADCP's voltages. The obtained values fell in a range of -92 dB to -62 dB, for the layer of the water column comprised between 26 m - 300 m on 2001 and in the range of -93 dB to -58 dB for the water column between 22 m - 300 m on 2006. Depth-averaged, S V, for the upper water column (about the first 150 m on experiment transects were computed as well as S V values averaged in depth and latitude. Data processing revealed interesting features about the upper ocean acoustic behaviour. On December 2001, a significant non-uniform scattering response in the ensonified water column with quite high values of S V, associated with the diel vertical migration, was obtained. Additionally, a remarkable increment in the scattering response was observed at the estimated location of the Antarctic Divergence (AD. This feature was also observed on January 2006 in addition to remarkable high values of S V, in coastal waters of the Antarctic Peninsula. Plotting and exhaustive analyses of S V (z profiles enabled the visualisation of three distinct types of qualitative patterns, namely, curves with: (I two observable maxima, (II only one maximum, (III a depth

  14. Field intercomparison of channel master ADCP with RiverSonde Radar for measuring river discharge

    Science.gov (United States)

    Spain, P.; Marsden, R.; Barrick, D.; Teague, C.; Ruhl, C.

    2005-01-01

    The RiverSonde radar makes non-contact measurement of a horizontal swath of surface velocity across a river section. This radar, which has worked successfully at several rivers in the Western USA, has shown encouraging correlation with simultaneous measurements of average currents at one level recorded by an acoustic travel-time system. This work reports a field study intercomparing data sets from a 600 kHz Channel Master ADCP with the RiverSonde radar. The primary goal was to begin to explore the robustness of the radar data as a reliable index of discharge. This site Is at Three Mile Slough in Northern California, USA. The larger intent of the work is to examine variability in space and time of the radar's surface currents compared with subsurface flows across the river section. Here we examine data from a couple of periods with strong winds. ?? 2005 IEEE.

  15. Measurement of Current Profile in a Tokamak Through AC Modulation

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The plasma current is modulated with an alternating current (ac) component in a frequency range of 90 Hz~900 Hz in the plateau discharge phase in the CT-6B tokamak. A plasma electric conductivity profile in a form of (1 - r2/a2)α with a parameter α, which is fitted with the experimental data, can be determined. The effects of magnetic shear in a tokamak field configuration on the current penetration are taken into account in the numerical simulation. The measurement method and obtained results are discussed.

  16. The Tsushima Warm Current from a High Resolution Ocean Prediction Model, HYCOM

    Directory of Open Access Journals (Sweden)

    Seongbong Seo

    2013-06-01

    Full Text Available This study investigates the characteristic of the Tsushima Warm Current from an assimilated high resolution global ocean prediction model, 1/12o Global HYbrid Coordiate Ocean Model (HYCOM. The model results were verified through a comparison with current measurements obtained by acoustic Doppler current profiler (ADCP mounted on the passenger ferryboat between Busan, Korea, and Hakata, Japan. The annual mean transport of the Tsushima Warm Current was 2.56 Sverdrup (Sv (1 Sv = 106 m3s−1, which is similar to those from previous studies (Takikawa et al. 1999; Teague et al. 2002. The volume transport time series of the Tsushima Warm Current from HYCOM correlates to a high degree with that from the ADCP observation (the correlation coefficient between the two is 0.82. The spatiotemporal structures of the currents as well as temperature and salinity from HYCOM are comparable to the observed ones.

  17. ORNL ADCP POST-PROCESSING GUIDE AND MATLAB ALGORITHMS FOR MHK SITE FLOW AND TURBULENCE ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    Gunawan, Budi [Oak Ridge National Laboratory (ORNL); Neary, Vincent S [ORNL

    2011-09-01

    Standard methods, along with guidance for post-processing the ADCP stationary measurements using MATLAB algorithms that were evaluated and tested by Oak Ridge National Laboratory (ORNL), are presented following an overview of the ADCP operating principles, deployment methods, error sources and recommended protocols for removing and replacing spurious data.

  18. Improvement of tokamak confinement by current profile control

    Energy Technology Data Exchange (ETDEWEB)

    Itoh, Kimitaka (National Inst. for Fusion Science, Nagoya (Japan)); Itoh, Sanae; Yagi, Masatoshi; Fukuyama, Atsushi; Azumi, Masafumi

    1993-12-01

    Impact of the current profile on the anomalous transport coefficients in tokamaks is discussed, based on the recent progress of the anomalous transport theory. When the central q-value is elevated above unity, the geometry turns to the magnetic well, and the anomalous transport is reduced. If the negative shear is realized, the anomalous transport is further reduced. The confinement improvement phenomena associated with the lower hybrid wave current drive and with high [beta][sub p] experiments are discussed as an application of this model. A motivation of the research on the steady state plasmas is also discussed. (author).

  19. Normalized velocity profiles of field-measured turbidity currents

    Science.gov (United States)

    Xu, Jingping

    2010-01-01

    Multiple turbidity currents were recorded in two submarine canyons with maximum speed as high as 280 cm/s. For each individual turbidity current measured at a fixed station, its depth-averaged velocity typically decreased over time while its thickness increased. Some turbidity currents gained in speed as they traveled downcanyon, suggesting a possible self-accelerating process. The measured velocity profiles, first in this high resolution, allowed normalizations with various schemes. Empirical functions, obtained from laboratory experiments whose spatial and time scales are two to three orders of magnitude smaller, were found to represent the field data fairly well. The best similarity collapse of the velocity profiles was achieved when the streamwise velocity and the elevation were normalized respectively by the depth-averaged velocity and the turbidity current thickness. This normalization scheme can be generalized to an empirical function Y = exp(–αXβ) for the jet region above the velocity maximum. Confirming theoretical arguments and laboratory results of other studies, the field turbidity currents are Froude-supercritical.

  20. Numerical performance analysis of acoustic Doppler velocity profilers in the wake of an axial-flow marine hydrokinetic turbine

    Energy Technology Data Exchange (ETDEWEB)

    Richmond, Marshall C.; Harding, Samuel F.; Romero Gomez, Pedro DJ

    2015-09-01

    The use of acoustic Doppler current profilers (ADCPs) for the characterization of flow conditions in the vicinity of both experimental and full scale marine hydrokinetic (MHK) turbines is becoming increasingly prevalent. The computation of a three dimensional velocity measurement from divergent acoustic beams requires the assumption that the flow conditions are homogeneous between all beams at a particular axial distance from the instrument. In the near wake of MHK devices, the mean fluid motion is observed to be highly spatially dependent as a result of torque generation and energy extraction. This paper examines the performance of ADCP measurements in such scenarios through the modelling of a virtual ADCP (VADCP) instrument in the velocity field in the wake of an MHK turbine resolved using unsteady computational fluid dynamics (CFD). This is achieved by sampling the CFD velocity field at equivalent locations to the sample bins of an ADCP and performing the coordinate transformation from beam coordinates to instrument coordinates and finally to global coordinates. The error in the mean velocity calculated by the VADCP relative to the reference velocity along the instrument axis is calculated for a range of instrument locations and orientations. The stream-wise velocity deficit and tangential swirl velocity caused by the rotor rotation lead to significant misrepresentation of the true flow velocity profiles by the VADCP, with the most significant errors in the transverse (cross-flow) velocity direction.

  1. Hydraulic validation of two-dimensional simulations of braided river flow with spatially continuous aDcp data

    Science.gov (United States)

    Williams, R. D.; Brasington, J.; Hicks, M.; Measures, R.; Rennie, C. D.; Vericat, D.

    2013-09-01

    Gravel-bed braided rivers are characterized by shallow, branching flow across low relief, complex, and mobile bed topography. These conditions present a major challenge for the application of higher dimensional hydraulic models, the predictions of which are nevertheless vital to inform flood risk and ecosystem management. This paper demonstrates how high-resolution topographic survey and hydraulic monitoring at a density commensurate with model discretization can be used to advance hydrodynamic simulations in braided rivers. Specifically, we detail applications of the shallow water model, Delft3d, to the Rees River, New Zealand, at two nested scales: a 300 m braid bar unit and a 2.5 km reach. In each case, terrestrial laser scanning was used to parameterize the topographic boundary condition at hitherto unprecedented resolution and accuracy. Dense observations of depth and velocity acquired from a mobile acoustic Doppler current profiler (aDcp), along with low-altitude aerial photography, were then used to create a data-rich framework for model calibration and testing at a range of discharges. Calibration focused on the estimation of spatially uniform roughness and horizontal eddy viscosity, νH, through comparison of predictions with distributed hydraulic data. Results revealed strong sensitivity to νH, which influenced cross-channel velocity and localization of high shear zones. The high-resolution bed topography partially accounts for form resistance, and the recovered roughness was found to scale by 1.2-1.4 D84 grain diameter. Model performance was good for a range of flows, with minimal bias and tight error distributions, suggesting that acceptable predictions can be achieved with spatially uniform roughness and νH.

  2. Extraction of Internal Tidal Currents from A Portion of Sea Current Profile

    Institute of Scientific and Technical Information of China (English)

    韩春明; 潘增弟; 范典

    2002-01-01

    Internal tide is one of the major oceanic phenomena. Determination of internal tide is important for theoretical studyand for ocean engineering research. As an inverse problem, extraction of internal tidal currents from sea currents is diffi-cult. In this paper, a method is developed to extract internal tidal currents from a portion of the sea current profile basedon the fact that the directions of internal tidal currents above and below the thermocline are inverse. Sea current data col-lected from the South China Sea is processed with this method. The internal tidal currents and the depth of the thermo-cline are successfully extracted. The depth of the thermocline determined is in good agreement with that measured in 1959.

  3. Klamath River Water Quality and Acoustic Doppler Current Profiler Data from Link River Dam to Keno Dam, 2007

    Science.gov (United States)

    Sullivan, Annett B.; Deas, Michael L.; Asbill, Jessica; Kirshtein, Julie D.; Butler, Kenna D.; Stewart, Marc A.; Wellman, Roy W.; Vaughn, Jennifer

    2008-01-01

    In 2007, the U.S. Geological Survey, Watercourse Engineering, and the Bureau of Reclamation began a project to construct and calibrate a water quality and hydrodynamic model of the 21-mile reach of the Klamath River from Link River Dam to Keno Dam. To provide a basis for this work, data collection and experimental work were planned for 2007 and 2008. This report documents sampling and analytical methods and presents data from the first year of work. To determine water velocities and discharge, a series of cross-sectional acoustic Doppler current profiler (ADCP) measurements were made on the mainstem and four canals on May 30 and September 19, 2007. Water quality was sampled weekly at five mainstem sites and five tributaries from early April through early November, 2007. Constituents reported here include field parameters (water temperature, pH, dissolved oxygen concentration, specific conductance); total nitrogen and phosphorus; particulate carbon and nitrogen; filtered orthophosphate, nitrite, nitrite plus nitrate, ammonia, organic carbon, iron, silica, and alkalinity; specific UV absorbance at 254 nm; phytoplankton and zooplankton enumeration and species identification; and bacterial abundance and morphological subgroups. The ADCP measurements conducted in good weather conditions in May showed that four major canals accounted for most changes in discharge along the mainstem on that day. Direction of velocity at measured locations was fairly homogeneous across the channel, while velocities were generally lowest near the bottom, and highest near surface, ranging from 0.0 to 0.8 ft/s. Measurements in September, made in windy conditions, raised questions about the effect of wind on flow. Most nutrient and carbon concentrations were lowest in spring, increased and remained elevated in summer, and decreased in fall. Dissolved nitrite plus nitrate and nitrite had a different seasonal cycle and were below detection or at low concentration in summer. Many nutrient and

  4. Calculation of in situ acoustic sediment attenuation using off-the-shelf horizontal ADCPs in low concentration settings

    Science.gov (United States)

    Haught, Dan; Venditti, Jeremy G.; Wright, Scott A.

    2017-06-01

    The use of "off-the-shelf" acoustic Doppler velocity profilers (ADCPs) to estimate suspended sediment concentration and grain-size in rivers requires robust methods to estimate sound attenuation by suspended sediment. Theoretical estimates of sediment attenuation require a priori knowledge of the concentration and grain-size distribution (GSD), making the method impractical to apply in routine monitoring programs. In situ methods use acoustic backscatter profile slope to estimate sediment attenuation, and are a more attractive option. However, the performance of in situ sediment attenuation methods has not been extensively compared to theoretical methods. We used three collocated horizontally mounted ADCPs in the Fraser River at Mission, British Columbia and 298 observations of concentration and GSD along the acoustic beams to calculate theoretical and in situ sediment attenuation. Conversion of acoustic intensity from counts to decibels is influenced by the instrument noise floor, which affects the backscatter profile shape and therefore in situ attenuation. We develop a method that converts counts to decibels to maximize profile length, which is useful in rivers where cross-channel acoustic profile penetration is a fraction of total channel width. Nevertheless, the agreement between theoretical and in situ attenuation is poor at low concentrations because cross-stream gradients in concentration, sediment size or GSD can develop, which affect the backscatter profiles. We establish threshold concentrations below which in situ attenuation is unreliable in Fraser River. Our results call for careful examination of cross-stream changes in suspended sediment characteristics and acoustic profiles across a range of flows before in situ attenuation methods are applied in river monitoring programs.

  5. The diel vertical migration of sound scatterers observed by an acoustic Doppler current profiler in the Luzon Strait from July 2009 to April 2011

    Institute of Scientific and Technical Information of China (English)

    YANG Chenghao; LIAO Guanghong; YUAN Yaochu; CHEN Hong; ZHU Xiaohua

    2013-01-01

    Acoustic Doppler current profiler (ADCP) receives echoes from sound scatterers, then their speed is calcu-lated by the Doppler effect. In the open ocean, most of these backscatterers are from the plankton. The sound scatterers descend down to depth at around dawn, their mean speed is 2.9 cm/s, then they ascend up to the surface layer at around dusk with a mean speed of 2.1 cm/s, in the Luzon Strait. The descending speed is faster, which suggests that this zooplankton population may accelerate its downward migration under the action of the gravity. The vertical distribution of a mean volume backscattering strength (MVB-S) in the nighttime has two peaks, which locate near the upper and lower boundary layers of halocline, respectively. However, the backscatterers only aggregate near the surface layer in the daytime. The diel ver-tical migration (DVM) of sound scatterers has several characteristic patterns, it is stronger in summer, but weaker in winter, and the maximum peak occurs in September. The DVM occurrence is synchronous with the seawater temperature increasing at around dawn and dusk, it may affect the ocean mixing and water stratification.

  6. Understanding Secondary Flows in Rivers Using a Combination of Acoustic Doppler Current Profiler Measurements and a Finite Volume solution to the Navier-Stokes Equations.

    Science.gov (United States)

    Furtak-Cole, E.

    2016-12-01

    Hydraulic processes in rivers are central to issues of river ecosystem health, contaminant transport, and essential to understanding meander dynamics. In particular, large scale secondary flows are often cited as being the driving force behind river bend shape and migration. We seek to understand the fundamental flow patterns in rivers by augmenting field-collected bathymetry and velocity data with computational fluid dynamics (CFD) simulation. This approach has successfully been applied to flume studies, but rarely used in a natural setting. Here, complex geometries, lack of data, large woody debris, riprap, and biased measurements all present difficulties. Velocity and bathymetry data were collected over multiple consecutive days on a reach of the Minnesota river in Belle Plaine with an acoustic Doppler current profiler (ADCP). Time averaging and interpolation of velocity vectors along transects reveal coarse scale secondary flow patterns, including an outer bank cell. A mesh was created from bathymetry data for use with the openFOAM C++ library. A hydraulics study is conducted by solving the Navier-Stokes equations with a slip condition free-surface and large eddy simulation turbulence model. Results are compared to field-measured data, and areas affected by downed trees and riprap are identified. We show that modelling at the coarse scale can provide useful information for understanding river hydraulics and predicting sediment transport over large domains.

  7. Current profile modification experiments in EXTRAP T2R

    Science.gov (United States)

    Cecconello, M.; Malmberg, J.-A.; Spizzo, G.; Chapman, B. E.; Gravestjin, R. M.; Franz, P.; Piovesan, P.; Martin, P.; Drake, J. R.

    2004-01-01

    Pulsed poloidal current drive (PPCD) experiments have been conducted in the resistive shell EXTRAP T2R reversed-field pinch experiment. During the current profile modification phase, the fluctuation level of the m = 1 internally resonant tearing modes decreases, and the velocity of these modes increases. The m = 0 modes are not affected during PPCD, although termination occurs with a burst in the m = 0 amplitude. The PPCD phase is characterized by an increase in the central electron temperature (up to 380 eV) and in the soft x-ray signal. Spectroscopic observations confirm an increase in the central electron temperature. During PPCD, the plasma poloidal beta increases to 14%, and the estimated energy confinement time doubles, reaching 380 µs. The reduction in the fluctuation level and the corresponding increase in the energy confinement time are qualitatively consistent with a reduction in parallel transport along stochastic magnetic field lines.

  8. Current profile control experiments in EXTRAP T2R

    Science.gov (United States)

    Brunsell, P.; Cecconello, M.; Drake, J.; Franz, P.; Malmberg, J. A.; Marrelli, L.; Martin, P.; Spizzo, G.

    2002-11-01

    EXTRAP T2R is a high aspect ratio (R=1.24 m, a = 0.183 m) reversed-field pinch device, characterised by a double, thin shell system. The simultaneous presence of many m=1, |n| > 11 tearing modes is responsible for a magnetic field turbulence, which is believed to produce the rather high energy and particle transport that is observed in this type of magnetic configuration. In this paper first results from current profile control experiments (PPCD) in a thin shell device are shown. When an edge poloidal electric field is transiently applied, an increase of the electron temperature and of the electron density is seen, which is consistent with an increase of the thermal content of the plasma. At the same time, the soft x-ray emission, measured with a newly installed miniaturised camera, shows a peaking of the profile in the core. Furthermore, the amplitudes of the m=1 tearing modes are reduced and and the rotation velocities increase during PPCD, which is also consistent with a reduction of magnetic turbulence and a heating of the plasma

  9. Improvised explosive devices: pathophysiology, injury profiles and current medical management.

    Science.gov (United States)

    Ramasamy, A; Hill, A M; Clasper, J C

    2009-12-01

    The improvised explosive device (IED), in all its forms, has become the most significant threat to troops operating in Afghanistan and Iraq. These devices range from rudimentary home made explosives to sophisticated weapon systems containing high-grade explosives. Within this broad definition they may be classified as roadside explosives and blast mines, explosive formed pojectile (EFP) devices and suicide bombings. Each of these groups causeinjury through a number of different mechanisms and can result in vastly different injury profiles. The "Global War on Terror" has meant that incidents which were previously exclusively seen in conflict areas, can occur anywhere, and clinicians who are involved in emergency trauma care may be required to manage casualties from similar terrorist attacks. An understanding of the types of devices and their pathophysiological effects is necessary to allow proper planning of mass casualty events and to allow appropriate management of the complex poly-trauma casualties they invariably cause. The aim of this review article is to firstly describe the physics and injury profile from these different devices and secondly to present the current clinical evidence that underpins their medical management.

  10. Current Perspectives on Profiling and Enhancing Wheelchair Court Sport Performance.

    Science.gov (United States)

    Paulson, Thomas; Goosey-Tolfrey, Victoria

    2017-03-01

    Despite the growing interest in Paralympic sport, the evidence base for supporting elite wheelchair sport performance remains in its infancy when compared with able-bodied (AB) sport. Subsequently, current practice is often based on theory adapted from AB guidelines, with a heavy reliance on anecdotal evidence and practitioner experience. Many principles in training prescription and performance monitoring with wheelchair athletes are directly transferable from AB practice, including the periodization and tapering of athlete loads around competition, yet considerations for the physiological consequences of an athlete's impairment and the interface between athlete and equipment are vital when targeting interventions to optimize in-competition performance. Researchers and practitioners are faced with the challenge of identifying and implementing reliable protocols that detect small but meaningful changes in impairment-specific physical capacities and on-court performance. Technologies to profile both linear and rotational on-court performance are an essential component of sport-science support to understand sport-specific movement profiles and prescribe training intensities. In addition, an individualized approach to the prescription of athlete training and optimization of the "wheelchair-user interface" is required, accounting for an athlete's anthropometrics, sports classification, and positional role on court. In addition to enhancing physical capacities, interventions must focus on the integration of the athlete and his or her equipment, as well as techniques for limiting environmental influence on performance. Taken together, the optimization of wheelchair sport performance requires a multidisciplinary approach based on the individual requirements of each athlete.

  11. Evaluation of ship-based sediment flux measurements by ADCPs in tidal flows

    Science.gov (United States)

    Becker, Marius; Maushake, Christian; Grünler, Steffen; Winter, Christian

    2017-04-01

    In the past decades acoustic backscatter calibration developed into a frequently applied technique to measure fluxes of suspended sediments in rivers and estuaries. Data is mainly acquired using single-frequency profiling devices, such as ADCPs. In this case, variations of acoustic particle properties may have a significant impact on the calibration with respect to suspended sediment concentration, but associated effects are rarely considered. Further challenges regarding flux determination arise from incomplete vertical and lateral coverage of the cross-section, and the small ratio of the residual transport to the tidal transport, depending on the tidal prism. We analyzed four sets of 13h cross-sectional ADCP data, collected at different locations in the range of the turbidity zone of the Weser estuary, North Sea, Germany. Vertical LISST, OBS and CTD measurements were taken very hour. During the calibration sediment absorption was taken into account. First, acoustic properties were estimated using LISST particle size distributions. Due to the tidal excursion and displacement of the turbidity zone, acoustic properties of particles changed during the tidal cycle, at all locations. Applying empirical functions, the lowest backscattering cross-section and highest sediment absorption coefficient were found in the center of the turbidity zone. Outside the tidally averaged location of the turbidity zone, changes of acoustic parameters were caused mainly by advection. In the turbidity zone, these properties were also affected by settling and entrainment, inducing vertical differences and systematic errors in concentration. In general, due to the iterative correction of sediment absorption along the acoustic path, local errors in concentration propagate and amplify exponentially. Based on reference concentration obtained from water samples and OBS data, we quantified these errors and their effect on cross-sectional averaged concentration and sediment flux. We found that

  12. Comparison of current density profiles based on particle orbit-driven current in steady-state plasma on QUEST

    Energy Technology Data Exchange (ETDEWEB)

    Alam, Md Mahbub, E-mail: m.alam@triam.kyushu-u.ac.jp [IGSES, Kyushu University, 6-1 Kasuga-koen, Kasuga, Fukuoka 816-8580 (Japan); Nakamura, Kazuo [RIAM, Kyushu University, 6-1 Kasuga-koen, Kasuga, Fukuoka 816-8580 (Japan); Xia, Fan [CFS, SWIP, P.O. Box 432, 610041 Chengdu (China); Mitarai, Osamu [Tokai University, Kumamoto 862-8652 (Japan); Hasegawa, Makoto; Tokunaga, Kazutoshi; Araki, Kuniaki; Zushi, Hideki; Hanada, Kazuaki; Fujisawa, Akihide; Idei, Hiroshi; Nagashima, Yoshihiko; Kawasaki, Shoji; Nakashima, Hisatoshi; Higashijima, Aki; Nagata, Takahiro [RIAM, Kyushu University, 6-1 Kasuga-koen, Kasuga, Fukuoka 816-8580 (Japan)

    2016-11-01

    Highlights: • Electron cyclotron resonance heating (ECRH) of QUEST. • Particle guiding center orbit calculation. • Orbit-driven current density profile. • Hollow current density. • Equilibrium condition for steady-state operation of QUEST. - Abstract: In the present RF-driven divertor plasma of QUEST, it has been observed that orbit-driven current flows in the open magnetic surfaces outside of the closed magnetic surfaces. To observe this phenomenon and the characteristics of the orbit-driven current, current density profiles have been calculated on two different equilibrium conditions. We calculated current density profiles from particle guiding center orbits both for the fundamental and the second harmonic resonances for the 8.2 GHz electron cyclotron current drive. From this calculation, hollow current density profiles have been obtained with significant characteristics on both conditions. Only positive current distribution has been observed in the open magnetic surfaces outside of the closed magnetic surfaces.

  13. Results of many-year subsatellite measurements of current fine structure in northeastern Black Sea

    Science.gov (United States)

    Lavrova, Olga; Krayushkin, Evgeny; Kalashnikova, Nina

    Results of subsatellite measurements of coastal currents in the shelf zone of northeastern Black Sea are presented. The measurements have been performed every year since 2006 in June and September-October months near the Gelendzhik Bay. The main instruments used are Acoustic Doppler Current Profilers (ADCP) and CTD probes. Ground and ship measurements were conducted simultaneously with satellite imaging in microwave (ASAR Envisat, ERS-2, RADARSAT-2, TerraSAR-X), visible and infrared (OLI Landsat-8, ETM+ Landsat-7, TM Landsat-5, MODIS Terra/Aqua, AVHRR NOAA) ranges. The investigations performed revealed spatial, depth and temporal variability of current direction and velocity in the shelf zone. Multiple instances of counter-currents opposing to the Ring Current were registered. In our view, they are associated with a passage of small-scale anticyclonic eddies across the region of interest. The 3D structure of the eddies in the upper quasi-uniform layer was analyzed based on ADCP data. The use of high resolution (3 m) SAR data in combination with ADCP measurements at the resolution of 0.5 m allowed us to detect a number of internal wave trains. Form ADCP and thermistors records, their amplitudes were estimated to reach 5-8 m. Joint analysis of satellite SAR and subsatellite data gave an assessment of their typical wavelength at 90-100 m. Generation mechanisms of these internal waves are suggested. Another phenomenon of interest observed in the region of the measurements is surface manifestations of ring waves near localized natural and anthropogenic generation sources. Such ring waves are most frequently found in the anchor area for ships, whose oscillations can be the source of their generation. The work was in part supported by the Russian Foundation for Basic Research (projects #14-05-00520-а, and 13-07-12017-ofi_m). SAR data from RADARSAT-2 and TerraSAR-X were obtained under SOAR RADARSAT-2/TerraSAR-X Project #5074.

  14. CHANGES OF MEAN VELOCITY PROFILES IN THE WAVE-CURRENT COMBINED FLOW

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In this paper, a mathematical model is developed to simulate thechange in mean velocity for the coexistent case of waves and current. The experimental results of mean velocity profile in a wave-current flume have shown following features: Eulerian mean current profile for following current is more uniformly distributed than the corresponding pure current case, whereas, the case of an opposing current leads to the more straight profile. This model is based on Eulerian mean framework, and motions of wave and current are solved simultaneously. The comparisons of numerical results and experimental data show that the mathematical model presented in this paper is reasonable and feasible.

  15. Profiles for voltage-activated currents are multiphasic, not curvilinear

    CERN Document Server

    Nissen, Per

    2016-01-01

    Data for voltage-activation of a potassium channel (Matulef et al. Proc Natl Acad Sci USA 110: 17886-17891. 2013) were, as conventionally done, fitted by the authors by a Boltzmann function, i.e. by a curvilinear profile. Reanalysis of the data reveals however that this interpretation must be rejected in favor of a multiphasic profile, a series of straight lines separated by discontinuous transitions, quite often in the form of noncontiguities (jumps). In contrast to the generally very poor fits to the Boltzmann profiles, the fits to multiphasic profiles are very good. (For the four replicates, the average deviations from the Boltzmann curves were 10- to 100-fold larger than the deviations from the multiphasic profiles.) The difference in the median values was statistically highly significant, P<0.001 in most cases. For the mean values the deviations from the Boltzmann curve were 20-fold larger than the deviations from the multiphasic profile, and the difference in the median values was also highly signifi...

  16. Morphology and flow fields of three-dimensional dunes, Rio Paraná, Argentina: Results from simultaneous multibeam echo sounding and acoustic Doppler current profiling

    Science.gov (United States)

    Parsons, D. R.; Best, J. L.; Orfeo, O.; Hardy, R. J.; Kostaschuk, R.; Lane, S. N.

    2005-12-01

    Most past studies of river dune dynamics have concentrated on two-dimensional (2-D) bed forms, with constant heights and straight crest lines transverse to the flow, and their associated turbulent flow structure. This morphological simplification imposes inherent limitations on the interpretation and understanding of dune form and flow dynamics in natural channels, where dune form is predominantly three-dimensional. For example, studies over 2-D forms neglect the significant influence that lateral flows and secondary circulation may have on the flow structure and thus dune morphology. This paper details a field study of a swath of 3-D dunes in the Rio Paraná, Argentina. A large (0.35 km wide, 1.2 km long) area of dunes was surveyed using a multibeam echo sounder (MBES) that provided high-resolution 3-D detail of the river bed. Simultaneous with the MBES survey, 3-D flow information was obtained with an acoustic Doppler current profiler (ADCP), revealing a complicated pattern of dune morphology and associated flow structure within the swath. Dune three-dimensionality appears intimately connected to the morphology of the upstream dune, with changes in crest line curvature and crest line bifurcations/junctions significantly influencing the downstream dune form. Dunes with lobe or saddle-shaped crest lines were found to have larger, more structured regions of vertical velocity with smaller separation zones than more 2-D straight-crested dunes. These results represent the first integrated study of 3-D dune form and mean flow structure from the field and show several similarities to recent laboratory models of flow over 3-D dunes.

  17. Residual magnetic field profiles and their current density profiles of coated conductors for fast and slow cut-off current operations

    Energy Technology Data Exchange (ETDEWEB)

    Sun, J.; Taillouli, M.; Hamabe, M.; Watanabe, H.; Chikumoto, N.; Yamaguchi, S. [Chubu University, Kasugai, Aichi (Japan); Shyshkin, O. [V. N. Karazin Kharkiv National University, Kharkov (Ukraine)

    2015-03-15

    Coated conductor is an important candidate for power cable applications due to its high current density. Even for DC power cable transmission, we must study the transport properties of HTS tapes after slow and fast discharge. In order to evaluate relation of the magnetic field with applied current we developed a scanning magnetic field measurements system by employing a Hall probe. This work presents the measurements of the magnetic fields above a coated conductor by varying applied current pattern. In the work, a transport current of 100 A, less than the critical current, is applied to YBCO coated conductor. We measured the residual magnetic field distributions after cut off the transport current with slow and fast operations. The results show differences of the magnetic field profiles and the corresponding current profiles by an inverse solution from the magnetic field measurement between these two operations because of the hysteresis of coated conductor excited by the transport current.

  18. Currents in the Dead Sea: Lagrangian and Eulerian observations

    Science.gov (United States)

    Ozer, Tal; Gertman, Isaac; Katsenelson, Boris; Bodzin, Raanan; Lensly, Nadav

    2015-04-01

    The Dead Sea is a terminal hypersaline lake located in the lowest surface on Earth (currently -429 m bsl). The physical properties of the brine are significantly different than in common marine systems: the DS brine density is ~1.24 gr/cc and its viscosity ~3 times higher than marine systems. We present observational data on wind and currents in the Dead Sea. The observation setup includes a few fixed (Eulerian) stations which are equipped with wind meter and current meter profiler that covers the entire water column (ADCP). Thermal stratification is continuously measured in some of the stations using a thermistor chain. Lagrangian drifters that record the shallow water currents were released in liner array of single drifters between the fixed stations, and also in triplets (15 m triangle). The results include the measured time series data of wind (atmospheric forcing) and the measured current profiles from the fixed stations. Data of the Lagrangian drifters is presented as trajectories along with vector time series. Quality control check included comparison of drifter data and ADCP data whenever the drifters passed by the fixed stations; a very good agreement was found between the different measuring approaches. We discuss the following issues : (i) the relation between the wind and current data, (ii) the Lagrangian trajectories and transport aspects.

  19. Current knowledge and pharmacological profile of berberine: An update.

    Science.gov (United States)

    Kumar, Anil; Ekavali; Chopra, Kanwaljit; Mukherjee, Madhurima; Pottabathini, Raghavender; Dhull, Dinesh K

    2015-08-15

    Berberine, a benzylisoquinoline alkaloid, occurs as an active constituent in numerous medicinal plants and has an array of pharmacological properties. It has been used in Ayurvedic and Chinese medicine for its antimicrobial, antiprotozoal, antidiarrheal and antitrachoma activity. Moreover, several clinical and preclinical studies demonstrate ameliorative effect of berberine against several disorders including metabolic, neurological and cardiological problems. This review provides a summary regarding the pharmacokinetic and pharmacodynamic features of berberine, with a focus on the different mechanisms underlying its multispectrum activity. Studies regarding the safety profile, drug interactions and important clinical trials of berberine have also been included. Clinical trials with respect to neurological disorders need to be undertaken to exploit the beneficiary effects of berberine against serious disorders such as Alzheimer's and Parkinson's disease. Also, clinical studies to detect rare adverse effects of berberine need to be initiated to draw a complete safety profile of berberine and strengthen its applicability.

  20. The Effect of Equilibrium Current Profiles on MHD Instabilities in Tokamaks%The Effect of Equilibrium Current Profiles on MHD Instabilities in Tokamaks

    Institute of Scientific and Technical Information of China (English)

    李莉; 刘悦; 许欣洋; 夏新念

    2012-01-01

    A cylindrical model of linear MHD instabilities in tokamaks is presented. In the model, the cylindrical plasma is surrounded by a vacuum which is divided into inner and outer vacuum areas by a conducting wall. Linearized resistivity MHD equations with plasma viscosity are adopted to describe our model, and the equations are solved numerically as an initial value problem. Some of the results are used as benchmark tests for the code, and then a series of equilibrium current profiles are used to simulate the bootstrap current profiles in actual experiments with a bump on tail. Thus the effects of these kinds of profiles on MHD instabilities in tokamaks are revealed. From the analysis of the numerical results, it is found that more plasma can be confined when the center of the current bump is closer to the plasma surface, and a higher and narrower current bump has a better stabilizing effect on the MHD instabilities.

  1. Application of Walk navigation type ADCP in tidal flow monitoring%走航式ADCP在感潮河段流量监测中的应用

    Institute of Scientific and Technical Information of China (English)

    林卫文

    2012-01-01

      Influenced by upstream runoff and tidal in the tidal reach, water level and flow rate changed fasterly, hydrological phenomena is extremely complex. represent line used the traditional routine test methods is validated, and the intensity of labor is bigger, the efficiency is lower. But walk navigation type ADCP (acoustic doppler velocity profile instrument) not only can quickly measure section flow, also can obtain the vertical ( on behalf of the line) flow rate and flow direction through the commands of the WinRiver software which controled ADCP, using the above methods,flow continuous test has been completed in the tidal reach,ShiJiao stations,beijiang river, good effect has achieved, and a new means was provided for the continuous monitoring of tidal flow section.%  在感潮河段受上游径流、潮汐的影响,水位、流速变化较快,水文现象极为复杂。采用传统的常规测验方法验证代表线,劳动强度较大,效率低下。而走航式ADCP(声学多普勒流速剖面仪)除可以快速测量断面流量外,也可以定点(固定垂线位置)通过WinRiver软件中的命令控制ADCP定时按时长获取垂线(代表线)流速、流向,应用上述方法在北江石角站完成感潮河段的流量连续测验,取得良好的效果,从而为感潮河段流量连续监测提供了一种新的手段。

  2. Electric field profiling by current transients in silicon diodes

    CERN Document Server

    Menichelli, D; Borchi, E; Toci, G

    2002-01-01

    A novel method, suitable to evaluate the electric field distribution in the space charge region of silicon diodes directly from the measurement of their pulse current response, is proposed. A Transient Current Technique experimental setup, based on a nano-second UV laser, is used for this purpose. It is shown that the problem of solving the basic equations, connecting the current response to the electric field distribution, can be expressed by a linear integral equation. An iterative mathematical procedure is used to obtain the solution, and a spatial resolution of about 10 mu m, comparable to the accuracy obtainable from other commonly used techniques, is deduced from the numerical tests. A preliminary analysis of measured data has also been carried out; the results are encouraging, but they point out that a refinement of the transport model is needed to reach a satisfactorily practical applicability.

  3. Electric field profiling by current transients in silicon diodes

    Energy Technology Data Exchange (ETDEWEB)

    Menichelli, D. E-mail: menichelli@ingfil.ing.unifi.it; Serafini, D.; Borchi, E.; Toci, G

    2002-01-11

    A novel method, suitable to evaluate the electric field distribution in the space charge region of silicon diodes directly from the measurement of their pulse current response, is proposed. A Transient Current Technique experimental setup, based on a nano-second UV laser, is used for this purpose. It is shown that the problem of solving the basic equations, connecting the current response to the electric field distribution, can be expressed by a linear integral equation. An iterative mathematical procedure is used to obtain the solution, and a spatial resolution of about 10 {mu}m, comparable to the accuracy obtainable from other commonly used techniques, is deduced from the numerical tests. A preliminary analysis of measured data has also been carried out; the results are encouraging, but they point out that a refinement of the transport model is needed to reach a satisfactorily practical applicability.

  4. Introduction: Current educational issues: some profiles and settings

    Directory of Open Access Journals (Sweden)

    María Pilar Teruel Melero

    2009-04-01

    Full Text Available This issue of the Revista Electrónica Interuniversitaria de Formación del Profesorado (REIFOP offers a range of articles focused on the profiles and settings of education today. It also includes the full text of the Pedagogical Manifesto “It is not true”, promoted by RedIres (School updating and research network, to which the journal adheres, taking it as its own. Finally, REIFOP makes available to all its readers a wide database of over 1,700 resources on Education and Psychology, retrievable online through the Internet.The authors of the articles are university lecturers and professors in the field of Education who carry out their academic research at ten Spanish universities: Barcelona, Extremadura, Granada, Las Palmas de Gran Canaria, Murcia, Oviedo, Santiago de Compostela, Sevilla, Valladolid and Zaragoza. We believe that this is a further way of reaching the whole university community.

  5. EAST equilibrium current profile reconstruction using polarimeter-interferometer internal measurement constraints

    Science.gov (United States)

    Qian, J. P.; Lao, L. L.; Liu, H. Q.; Ding, W. X.; Zeng, L.; Luo, Z. P.; Ren, Q. L.; Huang, Y.; Huang, J.; Brower, D. L.; Hanada, K.; Chen, D. L.; Sun, Y. W.; Shen, B.; Gong, X. Z.; Xiao, B. J.; Wan, B. N.

    2017-03-01

    The first equilibrium reconstruction of EAST current-density profile based on internal Faraday rotation measurements provided by the POlarimeter-INTerferometer (POINT) diagnostic is demonstrated using the EFIT equilibrium reconstruction code. EFIT incorporates 11 simultaneous line-integrated density and Faraday effect measurements from POINT to self-consistently reconstruct the equilibrium toroidal current density profile using a Faraday rotation reconstruction algorithm. It is shown that the POINT measurements can be applied to improve the accuracy of core plasma current density and q profile on EAST. Comparisons of magnetic surfaces and the q profile reconstructed using external magnetic data against those using magnetic and POINT data are presented. Equilibrium reconstructions using POINT data are found to be consistent with sawtooth phenomena. The sensitivity of equilibrium reconstruction to POINT measurements indicates Faraday rotation provides important constraints for determining the current profile.

  6. Improving LADCP Velocity Profiles with External Attitude Sensors

    Science.gov (United States)

    Thurnherr, A. M.; Goszczko, I.

    2016-12-01

    Data collected with Acoustic Doppler Current Profilers installed on CTD rosettes and lowered through the water column (LADCP systems) are routinely used to derive full-depth profiles of ocean velocity. In addition to the uncertainties arising from random noise in the along-beam velocity measurements, LADCP derived velocities are commonly contaminated by bias errors due to imperfectly measured instrument attitude (pitch, roll and heading). Of particular concern are the heading measurements because it is not usually feasible to calibrate the internal ADCP compasses with the instruments installed on a CTD rosette, away from the magnetic disturbances of the ship as well as the current-carrying winch wire. Heading data from dual-headed LADCP systems, which consist of upward and downward-pointing ADCPs installed on the same rosette, commonly indicate heading-dependent compass errors with amplitudes exceeding 10 degrees. In an attempt to reduce LADCP velocity errors, over 200 full-depth profiles were collected during several recent projects, including GO-SHIP, DIMES and ECOGIG, with an inexpensive (work at all.

  7. Personality profile in young current regular users of cocaine.

    Science.gov (United States)

    Herrero, M Jesús; Domingo-Salvany, Antonia; Torrens, Marta; Brugal, M Teresa; Gutiérrez, Fernando

    2008-01-01

    This study examined the relationship between the personality profile of a sample of cocaine users and the presence of Diagnostic and Statistical Manual of Mental Disorders (DSM-IV) diagnoses and the severity of substance use. A total of 120 participants (46 women, mean age: 23.8 years) from nonclinical settings in Barcelona, Spain, 2003-2006, were assessed using the Psychiatric Research Interview for Substance and Mental Disorders (PRISM) and the Temperament and Character Inventory-Revised version (TCI-R). Most of the participants had completed more than primary education, nearly half of them were employed, one third lived with parents, and near a quarter had some criminal record. Snorting was the main route of cocaine administration. They were using a mean of 1.82 substances. Cocaine users with low Self-Directedness, low Cooperativeness, and high Self-Transcendence scores in the TCI-R, with high severity of substance use and psychiatric comorbidity, would be suggestive of a possible specific phenotype. The limitations and implications of the study are discussed.

  8. Profile of secukinumab in the treatment of psoriasis: current perspectives

    Directory of Open Access Journals (Sweden)

    Roman M

    2015-12-01

    Full Text Available Michael Roman, Vandana K Madkan, Melvin W Chiu Division of Dermatology, David Geffen School of Medicine at UCLA, Los Angeles, CA, USA Abstract: Secukinumab (Cosentyx™ is a human monoclonal IgG1k antibody that has been developed to target and block the actions of IL-17A. It is known that this cytokine is elevated in lesions of psoriasis. Interleukins in the Th17 pathway play a pivotal role in the pathogenesis of psoriasis and have thus become targets for recent biologic drug development. As a monoclonal antibody immune modulator, secukinumab exhibits the expected pharmacokinetic properties of slow subcutaneous absorption, low clearance, and long half-life, although formal studies examining the impact of impaired hepatic or renal function on the overall pharmacokinetic profile have not been conducted. Both Phase II and III clinical trials have demonstrated the effectiveness of secukinumab in the treatment of moderate-to-severe plaque psoriasis, psoriatic arthritis, rheumatoid arthritis, ankylosing spondylitis, and noninfectious uveitis. In June 2015, secukinumab was approved by the US Food and Drug Administration for the treatment of adults with moderate-to-severe plaque psoriasis, with a wealth of clinical trials showcasing its efficacy in improving psoriasis area and severity index scores, and it is superior to other comparable biologics on the market, including the TNF inhibitor etanercept. As such, this review focuses on the marquee clinical trials involving secukinumab treatment of plaque psoriasis, while also exploring this drug’s efficacy in treating patients with psoriatic arthritis, a disease that has a well-documented comorbidity in patients diagnosed with moderate-to-severe plaque psoriasis. Finally, the safety and tolerability of this drug in a variety of clinical trials to date have also been reviewed, and will undoubtedly have a large impact on this drug’s postmarketing surveillance and future studies regarding its long

  9. Observed intraseasonal and seasonal variability of the West India Coastal Current on the continental slope

    Indian Academy of Sciences (India)

    P Amol; D Shankar; V Fernando; A Mukherjee; S G Aparna; R Fernandes; G S Michael; S T Khalap; N P Satelkar; Y Agarvadekar; M G Gaonkar; A P Tari; A Kankonkar; S P Vernekar

    2014-07-01

    We present current data from acoustic Doppler current profilers (ADCPs) moored on the continental slope off the west coast of India. The data were collected at four locations (roughly at Kanyakumari, Kollam, Goa, and Mumbai) extending from ∼7° to ∼20° N during 2008–2012. The observations show that a seasonal cycle, including an annual cycle, is present in the West India Coastal Current (WICC); this seasonal cycle, which strengthens northward, shows considerable interannual variability and is not as strongly correlated along the coast as in climatologies based on ship drifts or the altimeter. The alongshore decorrelation of theWICC is much stronger at intraseasonal periods, which are evident during the winter monsoon all along the coast. This intraseasonal variability is stronger in the south. A striking feature of the WICC is upward phase propagation, which implies an undercurrent whose depth becomes shallower as the season progresses. There are also instances when the phase propagates downward. At the two southern mooring locations off Kollam and Kanyakumari, the cross-shore current, which is usually associated with eddy-like circulations, is comparable to the alongshore current on occasions. A comparison with data from the OSCAR (Ocean Surface Currents Analyses Real-time) data product shows not only similarities, but also significant differences, particularly in the phase. One possible reason for this phase mismatch between the ADCP current at 48 m and the OSCAR current, which represents the current in the 0–30 m depth range, is the vertical phase propagation. Current products based on Ocean General Circulation Models like ECCO2 (Estimating the Circulation and Climate of the Ocean, Phase II) and GODAS (Global Ocean Data Assimilation System) show a weaker correlation with the ADCP current, and ECCO2 does capture some of the observed variability.

  10. Observed intraseasonal and seasonal variability of the West India Coastal Current on the continental slope

    Science.gov (United States)

    Amol, P.; Shankar, D.; Fernando, V.; Mukherjee, A.; Aparna, S. G.; Fernandes, R.; Michael, G. S.; Khalap, S. T.; Satelkar, N. P.; Agarvadekar, Y.; Gaonkar, M. G.; Tari, A. P.; Kankonkar, A.; Vernekar, S. P.

    2014-06-01

    We present current data from acoustic Doppler current profilers (ADCPs) moored on the continental slope off the west coast of India. The data were collected at four locations (roughly at Kanyakumari, Kollam, Goa, and Mumbai) extending from ˜ 7° to ˜ 20°N during 2008-2012. The observations show that a seasonal cycle, including an annual cycle, is present in the West India Coastal Current (WICC); this seasonal cycle, which strengthens northward, shows considerable interannual variability and is not as strongly correlated along the coast as in climatologies based on ship drifts or the altimeter. The alongshore decorrelation of the WICC is much stronger at intraseasonal periods, which are evident during the winter monsoon all along the coast. This intraseasonal variability is stronger in the south. A striking feature of the WICC is upward phase propagation, which implies an undercurrent whose depth becomes shallower as the season progresses. There are also instances when the phase propagates downward. At the two southern mooring locations off Kollam and Kanyakumari, the cross-shore current, which is usually associated with eddy-like circulations, is comparable to the alongshore current on occasions. A comparison with data from the OSCAR (Ocean Surface Currents Analyses Real-time) data product shows not only similarities, but also significant differences, particularly in the phase. One possible reason for this phase mismatch between the ADCP current at 48 m and the OSCAR current, which represents the current in the 0-30 m depth range, is the vertical phase propagation. Current products based on Ocean General Circulation Models like ECCO2 (Estimating the Circulation and Climate of the Ocean, Phase II) and GODAS (Global Ocean Data Assimilation System) show a weaker correlation with the ADCP current, and ECCO2 does capture some of the observed variability.

  11. Evolution of Wave Energy Deposition Profile in HT-7 Lower Hybrid Current Drive Experiment

    Institute of Scientific and Technical Information of China (English)

    方瑜德; 石跃江; 匡光力; 刘岳修; 沈慰慈; 丁伯江

    2001-01-01

    Lower hybrid waves (LHWs) with a selected n‖ spectrum have been used to control the energy deposition profiles, and then the wave driven current profiles effectively in tokamak discharges. In our lower hybrid current drive experiment in the HT-7 tokamak, it was found that the set-up of the wave energy deposition profile is a graduation process. In the beginning phase of the wave injection duration, the waves (with different n‖ spectra)deposit almost all their energy in the central region of the plasma column, even if their n‖ are very different. Up to around one hundred milliseconds, the wave energy deposition profiles can only take their corresponding shapes according to the n‖ spectra of LHWs. It also shown that this evolution process is affected obviously by the LHW driven current profile, which has been formed early.

  12. EMPYEMA THORACIS: A CURRENT PROFILE AT A TERTIARY CARE CENTER

    Directory of Open Access Journals (Sweden)

    Hemanta Kumar

    2016-02-01

    Full Text Available BACKGROUND Empyema Thoracis (ET, the accumulation of pus in pleural cavity due to infective origin, is a perpetual clinical entity since Hippocratic era. The incidence and prevalence varies depending on different countries, type of infections, age and immune status of the host. OBJECTIVE To study profile of ET cases in relation to demography, clinical features, imaging, bacteriological status and treatment among patients admitted to Pulmonary Medicine Department, SCBMCH, Cuttack, Odisha. MATERIALS AND METHODS One hundred cases of ET were included in the study prospectively with detailed history, meticulous physical examination, necessary imaging, sputum/pleural fluid Gram and AFB staining, AFB culture and aerobic culture sensitivity followed by specific treatment. RESULTS Majority ET cases belonged to ages between 21-70 yrs. with relatively higher occurrence in young and middle ages, affecting more commonly males (87%, farmers (36%, diabetics (22% and alcoholics (22%. There was no significant association of any hemithorax among tubercular empyemas (Right 49%: Left 45%, whereas involvement of right hemithorax was significantly higher than left in non-tubercular empyemas (Right 63%: Left 26%. Free ET was seen in 67% of cases, encysted ET in 33% cases and underlying lung parenchymal lesions in 62% cases. Pleural pus was thin in 66% cases and thick in 34% (Tubercular cases. Gram staining of pleural fluid showed no bacteria in 82% cases, whereas it revealed growth on aerobic culture in 41% of cases. Tuberculosis was most common cause of empyema in 73% cases (Inclusive MDR-TB 2.7%, where Definite TB-ET was 15.1%, Probable TB-ET 84.9% and super infection predominantly due to pseudomonas was 13.6%. In contrast, Non-TB-ET was 27%, in which staphylococcus aureus (33.3% was the major isolate followed by Ps. Aeruginosa and Esch. Coli (20% each on aerobic culture. Thoracocentesis was performed in 15% cases, ICTD in 84% cases, decortication in 4% cases and

  13. Fast electron current density profile and diffusion studies during LHCD in PBX-M

    Energy Technology Data Exchange (ETDEWEB)

    Jones, S.E.; Kesner, J.; Luckhardt, S.; Paoletti, F. [Massachusetts Inst. of Tech., Cambridge, MA (United States). Plasma Fusion Center; von Goeler, S.; Bernabei, S.; Kaita, R. [Princeton Univ., NJ (United States). Plasma Physics Lab.; Rimini, F. [JET Joint Undertaking, Abingdon (United Kingdom)

    1993-08-01

    Successful current profile control experiments using lower hybrid current drive (LCHD) clearly require knowledge of (1) the location of the driven fast electrons and (2) the ability to maintain that location from spreading due to radial diffusion. These issues can be addressed by examining the data from the hard x-ray camera on PBX-M, a unique diagnostic producing two-dimensional, time resolved tangential images of fast electron bremsstrahlung. Using modeling, these line-of-sight images are inverted to extract a radial fast electron current density profile. We note that ``hollow`` profiles have been observed, indicative of off-axis current drive. These profiles can then be used to calculate an upper bound for an effective fast electron diffusion constant: assuming an extremely radially narrow lower hybrid absorption profile and a transport model based on Rax and Moreau, a model fast electron current density profile is calculated and compared to the experimentally derived profile. The model diffusion constant is adjusted until a good match is found. Applied to steady-state quiescent modes on PBX-M, we obtain an upper limit for an effective diffusion constant of about D*=1.1 m{sup 2}/sec.

  14. Profiling of the injected charge drift current transients by cross-sectional scanning technique

    Energy Technology Data Exchange (ETDEWEB)

    Gaubas, E., E-mail: eugenijus.gaubas@ff.vu.lt; Ceponis, T.; Pavlov, J.; Baskevicius, A. [Institute of Applied Research, Vilnius University, Sauletekio av. 9-III, LT-10222 Vilnius (Lithuania)

    2014-02-07

    The electric field distribution and charge drift currents in Si particle detectors are analyzed. Profiling of the injected charge drift current transients has been implemented by varying charge injection position within a cross-sectional boundary of the particle detector. The obtained profiles of the induction current density and duration of the injected charge drift pulses fit well the simulated current variations. Induction current transients have been interpreted by different stages of the bipolar and monopolar drift of the injected carriers. Profiles of the injected charge current transients registered in the non-irradiated and neutron irradiated Si diodes are compared. It has been shown that the mixed regime of the competing processes of drift, recombination, and diffusion appears in the measured current profiles on the irradiated samples. The impact of the avalanche effects can be ignored based on the investigations presented. It has been shown that even a simplified dynamic model enabled us to reproduce the main features of the profiled transients of induced charge drift current.

  15. Profiling of the injected charge drift current transients by cross-sectional scanning technique

    Science.gov (United States)

    Gaubas, E.; Ceponis, T.; Pavlov, J.; Baskevicius, A.

    2014-02-01

    The electric field distribution and charge drift currents in Si particle detectors are analyzed. Profiling of the injected charge drift current transients has been implemented by varying charge injection position within a cross-sectional boundary of the particle detector. The obtained profiles of the induction current density and duration of the injected charge drift pulses fit well the simulated current variations. Induction current transients have been interpreted by different stages of the bipolar and monopolar drift of the injected carriers. Profiles of the injected charge current transients registered in the non-irradiated and neutron irradiated Si diodes are compared. It has been shown that the mixed regime of the competing processes of drift, recombination, and diffusion appears in the measured current profiles on the irradiated samples. The impact of the avalanche effects can be ignored based on the investigations presented. It has been shown that even a simplified dynamic model enabled us to reproduce the main features of the profiled transients of induced charge drift current.

  16. West Coast Observing System (WCOS) ADCP Station Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The West Coast Observing System (WCOS) project provides access to temperature and currents data collected at four of the five National Marine Sanctuary sites,...

  17. Theory and experiments on RF plasma heating, current drive and profile control in TORE SUPRA

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, D.

    1994-01-01

    This paper reviews the main experimental and theoretical achievements related to the study of RF heating and non-inductive current drive and particularly phenomena related to the current density profile control and the potentiality of producing stationary enhanced performance regimes: description of the Lower Hybrid (LH) and Ion Cyclotron Resonant Frequency (ICRF) systems; long pulse coupling performance of the RF systems; observation of the transition to the so-called ``stationary LHEP regime`` in which the (flat) central current density and (peaked) electron temperature profiles are fully decoupled; experiments on ICRF sawtooth stabilization with the combined effect of LHCD modifying the current density profile; diffusion of fast electrons generated by LH waves; ramp-up experiments in which the LH power provided a significant part of the resistive poloidal flux and flux consumption scaling; theory of spectral wave diffusion and multipass absorption; fast wave current drive modelling with the Alcyon full wave code; a reflector LH antenna concept. 18 figs., 48 refs.

  18. Optimization of the Safety Factor Profile for High Noninductive Current Fraction Discharges in DIII-D

    Energy Technology Data Exchange (ETDEWEB)

    Ferron, J.R. [General Atomics, San Diego; Holcomb, C T [Lawrence Livermore National Laboratory (LLNL); Luce, T.C. [General Atomics, San Diego; Politzer, P. A. [General Atomics, San Diego; Turco, F. [Oak Ridge Associated Universities (ORAU); White, A. E. [Massachusetts Institute of Technology (MIT); DeBoo, J. C. [General Atomics; Doyle, E. J. [University of California, Los Angeles; Hyatt, A. W. [General Atomics, San Diego; La Haye, R. [General Atomics, San Diego; Murakami, Masanori [ORNL; Petrie, T W [General Atomics, San Diego; Petty, C C. [General Atomics, San Diego; Rhodes, T. L. [University of California, Los Angeles; Zeng, L. [University of California, Los Angeles

    2011-01-01

    In order to assess the optimum q profile for discharges in DIII-D with 100% of the current driven noninductively (f(NI) = 1), the self-consistent response of the plasma profiles to changes in the q profile was studied in high f(NI), high beta(N) discharges through a scan of q(min) and q(95) at two values of beta(N). As expected, both the bootstrap current fraction, f(BS), and f(NI) increased with q(95). The temperature and density profiles were found to broaden as either q(min) or beta(N) is increased. A consequence is that f(BS) does not continue to increase at the highest values of q(min). A scaling function that depends on q(min), q(95), and the peaking factor for the thermal pressure was found to represent well the f(BS)/beta(N) inferred from the experimental profiles. The changes in the shapes of the density and temperature profiles as beta(N) is increased modify the bootstrap current density (J(BS)) profile from peaked close to the axis to relatively flat in the region between the axis and the H-mode pedestal. Therefore, significant externally driven current density in the region inside the H-mode pedestal is required in addition to J(BS) in order to match the profiles of the noninductive current density (J(NI)) to the desired total current density (J). In this experiment, the additional current density was provided mostly by neutral beam current drive with the neutral-beam-driven current fraction 40-90% of f(BS). The profiles of J(NI) and J were most similar at q(min) approximate to 1.35-1.65, q(95) approximate to 6.8, where f(BS) is also maximum, establishing this q profile as the optimal choice for f(NI) = 1 operation in DIII-D with the existing set of external current drive sources.

  19. Comparison of Return Stroke Current Profiles for Transmission-Line-Type and Traveling-Current-Source-Type Models

    Directory of Open Access Journals (Sweden)

    J.O. Adepitan

    2012-05-01

    Full Text Available The study is aimed at determining the dependence of the current along a channel on the model used, assuming the same base current. We compared three transmission-line-type models, namely: Transmission Line (TL, Modified Transmission Line with Linear decay, Modified Transmission Line with Exponential decay and two traveling-current-source-type models: Bruce-Golde (BG and Traveling Current Source (TCS models. The current profiles along the channel at different heights predicted by these models are presented and discussed. Comparison is based on the assumption that all the models have the same base current. It was found that at low heights and within a time window frame of 15 :s, the currents of the transmission-line-type models predict a zero value at one time or the other with a maximum turning point following some 1:s after. A linear relationship is predicted between the current peak and the channel height. A discontinuity of current peak was observed at high heights. No zero value of current was recorded in case of TCS both at low and high channel heights.

  20. Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Gwanghui [Argonne, HEP; Cho, Moo-Hyun [POSTECH; Conde, Manoel [Argonne, HEP; Doran, Darrell [Argonne, HEP; Gai, Wei [Argonne, HEP; Jing, Chunguang [Euclid Techlabs, Solon; Kim, Kwang-Je [Argonne, HEP; Liu, Wanming [Argonne, HEP; Namkung, Won [POSTECH; Piot, Philippe [Northern Illinois U.; Power, John [Argonne, HEP; Sun, Yin-E [Argonne, HEP; Whiteford, Charles [Argonne, HEP; Wisniewski, Eric [Argonne, HEP; Zholents, Alexander [Argonne, HEP

    2016-06-01

    Emittance exchange (EEX) based longitudinal current profile shaping is the one of the promising current profile shaping technique. This method can generate high quality arbitrary current profiles under the ideal conditions. The double dog-leg EEX beam line was recently installed at the Argonne Wakefield Accelerator (AWA) to explore the shaping capability and confirm the quality of this method. To demonstrate the arbitrary current profile generation, several different transverse masks are applied to generate different final current profiles. The phase space slopes and the charge of incoming beam are varied to observe and suppress the aberrations on the ideal profile. We present current profile shaping results, aberrations on the shaped profile, and its suppression.

  1. Effects of intergrain and intragrain currents on flux profile in granular superconducting ceramics

    Science.gov (United States)

    Godelaine, P. A.; Ausloos, M.

    1990-11-01

    We present generalizations of Bean critical state model to take into account granular effects as in high critical temperature superconductor ceramics. Both intragrain and intergrain critical current effect are discussed as they modify the "flux profile" determined by AC susceptibility measurements. We also examine the effect of Josephson weak links on the flux profile. We show how to obtain these electrical currents from the data together with the "granular fraction" and the flux penetration depth. Data on Bi 0.85Pb 0.15SrCa 1.2Cu 2O 6 sample is shown to be fitted to our theoretical expressions.

  2. Low profile, highly configurable, current sharing paralleled wide band gap power device power module

    Science.gov (United States)

    McPherson, Brice; Killeen, Peter D.; Lostetter, Alex; Shaw, Robert; Passmore, Brandon; Hornberger, Jared; Berry, Tony M

    2016-08-23

    A power module with multiple equalized parallel power paths supporting multiple parallel bare die power devices constructed with low inductance equalized current paths for even current sharing and clean switching events. Wide low profile power contacts provide low inductance, short current paths, and large conductor cross section area provides for massive current carrying. An internal gate & source kelvin interconnection substrate is provided with individual ballast resistors and simple bolted construction. Gate drive connectors are provided on either left or right size of the module. The module is configurable as half bridge, full bridge, common source, and common drain topologies.

  3. An Excel™-VBA programme for the analysis of current velocity profiles

    Science.gov (United States)

    Le Roux, J. P.; Brodalka, M.

    2004-10-01

    VPA is an Excel spreadsheet to facilitate the analysis of current velocity profiles and its application to sediment transport studies in steady, uniform, open-channel flows. The program requires input values such as the water temperature (from which the density and dynamic viscosity are calculated), the channel depth and slope, current velocities as measured at different heights above the bed, bedform length and height, as well as the sediment density and median size. The latter can be provided as sieve diameters, fall diameters or as phi values. The velocity profiles are plotted on two graphs, one being a traditional plot of velocity versus height or distance from the bed and the other comparing the observed profile with theoretical profiles for smooth, transitional and rough boundary conditions. VBA macros are provided to clear the spreadsheet before new profiles are analysed, update the formulas, straighten out the velocity profiles, calculate the shear velocity, and save the data on a separate sheet for further analysis. The programme is applied to a new and more accurate method to determine the shear velocity, which can be used to predict the bedload discharge over plane beds and is also incorporated into a dimensionally correct suspended load transport equation combining the parameters most important in sediment transport. A dimensionally correct bedload discharge equation based upon the mean excess flow velocity is also proposed for plane beds, ripples and dunes.

  4. From bench to bedside: current and future applications of molecular profiling in renal cell carcinoma

    Directory of Open Access Journals (Sweden)

    Yousef George M

    2009-03-01

    Full Text Available Abstract Among the adult population, renal cell carcinoma (RCC constitutes the most prevalent form of kidney neoplasm. Unfortunately, RCC is relatively asymptomatic and there are no tumor markers available for diagnostic, prognostic or predictive purposes. Molecular profiling, the global analysis of gene and protein expression profiles, is an emerging promising tool for new biomarker identification in RCC. In this review, we summarize the existing knowledge on RCC regarding clinical presentation, treatment options, and tumor marker status. We present a general overview of the more commonly used approaches for molecular profiling at the genomic, transcriptomic and proteomic levels. We also highlight the emerging role of molecular profiling as not only revolutionizing the process of new tumor marker discovery, but also for providing a better understanding of the pathogenesis of RCC that will pave the way towards new targeted therapy discovery. Furthermore, we discuss the spectrum of clinical applications of molecular profiling in RCC in the current literature. Finally, we highlight some of the potential challenging that faces the era of molecular profiling and its transition into clinical practice, and provide an insight about the future perspectives of molecular profiling in RCC.

  5. ADCP Observations of the Western Adriatic Slope Current During Winter of 2001

    Science.gov (United States)

    2005-05-23

    northern and central Adriatic Sea. Journal of Marine Systems , 20, 279-300. Cavaleri, L. (2000). The oceanographic tower Acqua Alta - activity and...Northern Adriatic Sea surface circulation and temperature/pigment fields in September and October 1997. Journal of Marine Systems , 29, 51-67. Orli6, M...drifter data between 1990 and 1999. Journal of Marine Systems , 29, 3-32. Pullen, J., Doyle, J. D., Hodur, R., Ogsten, A., Book, J. W., Perkins, H

  6. Ocean currents measured by Shipboard Acoustic Doppler Current Profilers (SADCP) from global oceans accumulated at Joint Archive for SADCP from 2004 to 2013 (NODC Accession 0123302)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Absolute U- and V-component ocean current vectors from Shipboard Acoustic Doppler Current Profilers (SADCP), as both a high-frequency sampling (nominally 5 minutes...

  7. Current meter and temperature profile data from moored current meter casts in the TOGA area - Atlantic Ocean from 10 September 1970 - 27 October 1980 (NODC Accession 8600320)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and temperature profile data were collected using moored current meter - PCM casts in the TOGA area - Atlantic Ocean from September 10, 1970 to October...

  8. Backstepping Control of the Current Profile in the DIII-D Tokamak

    Science.gov (United States)

    Boyer, M. D.; Barton, J.; Schuster, E.; Walker, M. L.; Humphreys, D. A.

    2011-10-01

    Control of the spatial profile of the plasma current in tokamaks has been demonstrated to be a key condition for advanced scenarios with improved confinement and steady-state operation. Non-model-based controllers tested at DIII-D have shown limitations, motivating the design of model-based controllers that account for the dynamics of the q profile. In this work, we utilize a control-oriented model of the current profile evolution in DIII-D to design a backstepping boundary control law for regulating the current profile around a desired feed-forward trajectory. The control scheme makes use of the total plasma current, total power, and line averaged density as actuators. A simulation study is done to test the control law against uncertainties in the model parameters and initial conditions, as well as input disturbances. Finally, the implementation of the controller in the DIII-D plasma control system is discussed and experimental results are presented. Supported by the NSF CAREER award program ECCS-0645086 and the US DOE under DE-FG02-09ER55064 and DE-FC02-04ER54698.

  9. Towards Current Profile Control in ITER: Potential Approaches and Research Needs

    Science.gov (United States)

    Schuster, E.; Barton, J. E.; Wehner, W. P.

    2014-10-01

    Many challenging plasma control problems still need to be addressed in order for the ITER Plasma Control System (PCS) to be able to successfully achieve the ITER project goals. For instance, setting up a suitable toroidal current density profile is key for one possible advanced scenario characterized by noninductive sustainment of the plasma current and steady-state operation. The nonlinearity and high dimensionality exhibited by the plasma demand a model-based current-profile control synthesis procedure that can accommodate this complexity through embedding the known physics within the design. The development of a model capturing the dynamics of the plasma relevant for control design enables not only the design of feedback controllers for regulation or tracking but also the design of optimal feedforward controllers for a systematic model-based approach to scenario planning, the design of state estimators for a reliable real-time reconstruction of the plasma internal profiles based on limited and noisy diagnostics, and the development of a fast predictive simulation code for closed-loop performance evaluation before implementation. Progress towards control-oriented modeling of the current profile evolution and associated control design has been reported following both data-driven and first-principles-driven approaches. An overview of these two approaches will be provided, as well as a discussion on research needs associated with each one of the model applications described above. Supported by the US Department of Energy under DE-SC0001334 and DE-SC0010661.

  10. Advanced Tokamak current density profiles for non-inductive Tore Supra operation

    Energy Technology Data Exchange (ETDEWEB)

    Kazarian-Vibert, F.; Litaudon, X.; Arslanbekov, R.; Bibet, P.; Froissard, P.; Goniche, M.; Hoang, G.T.; Joffrin, E.; Moreau, D.; Peysson, Y.; Rey, G. [Association Euratom-CEA, Centre d`Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee

    1995-12-31

    This document deals with the advanced Tokamak concept concerning self consistent hollow current density profiles. Several Lower Hybrid experiments performed on Tore Supra are presented: the feasibility of the constant-flux operation mode is demonstrated and a new improved confinement regime with a reversed shear has been obtained. (TEC). 12 refs., 5 figs.

  11. Model Predictive Control with Integral Action for Current Density Profile Tracking in NSTX-U

    Science.gov (United States)

    Ilhan, Z. O.; Wehner, W. P.; Schuster, E.; Boyer, M. D.

    2016-10-01

    Active control of the toroidal current density profile may play a critical role in non-inductively sustained long-pulse, high-beta scenarios in a spherical torus (ST) configuration, which is among the missions of the NSTX-U facility. In this work, a previously developed physics-based control-oriented model is embedded in a feedback control scheme based on a model predictive control (MPC) strategy to track a desired current density profile evolution specified indirectly by a desired rotational transform profile. An integrator is embedded into the standard MPC formulation to reject various modeling uncertainties and external disturbances. Neutral beam powers, electron density, and total plasma current are used as actuators. The proposed MPC strategy incorporates various state and actuator constraints directly into the control design process by solving a constrained optimization problem in real-time to determine the optimal actuator requests. The effectiveness of the proposed controller in regulating the current density profile in NSTX-U is demonstrated in closed-loop nonlinear simulations. Supported by the US DOE under DE-AC02-09CH11466.

  12. Plasma Shape and Current Density Profile Control in Advanced Tokamak Operating Scenarios

    Science.gov (United States)

    Shi, Wenyu

    The need for new sources of energy is expected to become a critical problem within the next few decades. Nuclear fusion has sufficient energy density to potentially supply the world population with its increasing energy demands. The tokamak is a magnetic confinement device used to achieve controlled fusion reactions. Experimental fusion technology has now reached a level where tokamaks are able to produce about as much energy as is expended in heating the fusion fuel. The next step towards the realization of a nuclear fusion tokamak power plant is ITER, which will be capable of exploring advanced tokamak (AT) modes, characterized by a high fusion gain and plasma stability. The extreme requirements of the advanced modes motivates researchers to improve the modeling of the plasma response as well as the design of feedback controllers. This dissertation focuses on several magnetic and kinetic control problems, including the plasma current, position and shape control, and data-driven and first-principles-driven modeling and control of plasma current density profile and the normalized plasma pressure ratio betaN. The plasma is confined within the vacuum vessel by an external electromagnetic field, produced primarily by toroidal and poloidal field coils. The outermost closed plasma surface or plasma boundary is referred to as the shape of the plasma. A central characteristic of AT plasma regimes is an extreme elongated shape. The equilibrium among the electromagnetic forces acting on an elongated plasma is unstable. Moreover, the tokamak performance is improved if the plasma is located in close proximity to the torus wall, which guarantees an efficient use of available volume. As a consequence, feedback control of the plasma position and shape is necessary. In this dissertation, an Hinfinity-based, multi-input-multi-output (MIMO) controller for the National Spherical Torus Experiment (NSTX) is developed, which is used to control the plasma position, shape, and X

  13. Calculation of the non-inductive current profile in high-performance NSTX plasmas

    Science.gov (United States)

    Gerhardt, S. P.; Fredrickson, E.; Gates, D.; Kaye, S.; Menard, J.; Bell, M. G.; Bell, R. E.; Le Blanc, B. P.; Kugel, H.; Sabbagh, S. A.; Yuh, H.

    2011-03-01

    The constituents of the current profile have been computed for a wide range of high-performance plasmas in NSTX (Ono et al 2000 Nucl. Fusion 40 557); these include cases designed to maximize the non-inductive fraction, pulse length, toroidal-β or stored energy. In the absence of low-frequency MHD activity, good agreement is found between the reconstructed current profile and that predicted by summing the independently calculated inductive, pressure-driven and neutral beam currents, without the need to invoke any anomalous beam ion diffusion. Exceptions occur, for instance, when there are toroidal Alfvén eigenmode avalanches or coupled m/n = 1/1 + 2/1 kink-tearing modes. In these cases, the addition of a spatially and temporally dependent fast-ion diffusivity can reduce the core beam current drive, restoring agreement between the reconstructed profile and the summed constituents, as well as bringing better agreement between the simulated and measured neutron emission rate. An upper bound on the fast-ion diffusivity of ~0.5-1 m2 s-1 is found in 'MHD-free' discharges, based on the neutron emission, the time rate of change in the neutron signal when a neutral beam is stepped and reconstructed on-axis current density.

  14. Robust Control of the Spatial Current Profile in the DIII-D Tokamak

    Science.gov (United States)

    Barton, J.; Schuster, E.; Walker, M. L.; Humphreys, D. A.

    2011-10-01

    Advanced tokamak operating scenarios, characterized by large noninductively driven plasma currents, typically require active regulation of a specific current density profile. Non-model-based control of the q profile has been tested at DIII-D. However, some present limitations of the controller motivate the design of a model-based controller that accounts for the dynamics of the whole q profile in response to the control actuators. A control-oriented model of the current profile evolution in DIII-D was recently developed and used to design feedforward control schemes. In order to reject the effects of external disturbances to the system, a feedback control input needs to be added to the feedforward input. In this work, we report on the design of a robust feedback controller, on the implementation of the combined model-based feedforward + feedback controller in the DIII-D Plasma Control System, and on the experimental validation of the combined controller in the DIII-D tokamak. Supported by the NSF CAREER award program ECCS-0645086 and the US DOE under DE-FG02-09ER55064 and DE-FC02-04ER54698.

  15. Generation of Ramped Current Profiles in Relativistic Electron Beams Using Wakefields in Dielectric Structures.

    Science.gov (United States)

    Andonian, G; Barber, S; O'Shea, F H; Fedurin, M; Kusche, K; Swinson, C; Rosenzweig, J B

    2017-02-03

    Temporal pulse tailoring of charged-particle beams is essential to optimize efficiency in collinear wakefield acceleration schemes. In this Letter, we demonstrate a novel phase space manipulation method that employs a beam wakefield interaction in a dielectric structure, followed by bunch compression in a permanent magnet chicane, to longitudinally tailor the pulse shape of an electron beam. This compact, passive, approach was used to generate a nearly linearly ramped current profile in a relativistic electron beam experiment carried out at the Brookhaven National Laboratory Accelerator Test Facility. Here, we report on these experimental results including beam and wakefield diagnostics and pulse profile reconstruction techniques.

  16. Generation of Ramped Current Profiles in Relativistic Electron Beams Using Wakefields in Dielectric Structures

    Science.gov (United States)

    Andonian, G.; Barber, S.; O'Shea, F. H.; Fedurin, M.; Kusche, K.; Swinson, C.; Rosenzweig, J. B.

    2017-02-01

    Temporal pulse tailoring of charged-particle beams is essential to optimize efficiency in collinear wakefield acceleration schemes. In this Letter, we demonstrate a novel phase space manipulation method that employs a beam wakefield interaction in a dielectric structure, followed by bunch compression in a permanent magnet chicane, to longitudinally tailor the pulse shape of an electron beam. This compact, passive, approach was used to generate a nearly linearly ramped current profile in a relativistic electron beam experiment carried out at the Brookhaven National Laboratory Accelerator Test Facility. Here, we report on these experimental results including beam and wakefield diagnostics and pulse profile reconstruction techniques.

  17. Temperature and current profiles from BT and current profilers from DRIFTING PLATFORMS from the SW Atlantic (limit-20 W) and other locations from 01 January 1993 to 31 December 1995 (NODC Accession 9600085)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and current data from BT cast and current profilers from DRIFTING PLATFORMS from the SW Atlantic (limit-20 W) and other locations. Data was collected by...

  18. Responses of atmospheric electric field and air-earth current to variations of conductivity profiles

    Science.gov (United States)

    Makino, M.; Ogawa, T.

    1984-05-01

    A global circuit model is constructed to study responses of air-earth current and electric field to a variation of atmospheric electrical conductivity profile. The model includes the orography and the global distribution of thunderstorm generators. The conductivity varies with latitude and exponentially with altitude. The thunderstorm cloud is assumed to be a current generator with a positive source at the top and a negative one at the bottom. The UT diurnal variations of the global current and the ionospheric potential are evaluated considering the local-time dependence of thunderstorm activity. The global distribution of the electric field and the air-earth current are affected by the orography and latitudinal effects. Assuming a variation of conductivity profile, responses of atmospheric electrical parameters are investigated. The nonuniform decrement of the conductivity with altitude increases both the electric field and the air-earth current. The result suggests a possibility that the increment of the electric field and the air-earth current after a solar flare may be caused by this scheme, due to Forbush decrease.

  19. Analysis of plasma equilibrium based on orbit-driven current density profile in steady-state plasma on QUEST

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, K., E-mail: nakamura@triam.kyushu-u.ac.jp [RIAM, Kyushu University, Kasuga 816-8580 (Japan); Alam, M.M. [IGSES, Kyushu University, Kasuga 816-8580 (Japan); Jiang, Y.Z. [Tsinghua University, Beijing 100084 (China); Mitarai, O. [Tokai University, Kumamoto 862-8652 (Japan); Kurihara, K.; Kawamata, Y.; Sueoka, M.; Takechi, M. [Japan Atomic Energy Agency, Naka 311-0193 (Japan); Hasegawa, M.; Tokunaga, K.; Araki, K.; Zushi, H.; Hanada, K.; Fujisawa, A.; Idei, H.; Nagashima, Y.; Kawasaki, S.; Nakashima, H.; Higashijima, A.; Nagata, T. [RIAM, Kyushu University, Kasuga 816-8580 (Japan); and others

    2016-11-01

    Highlights: • High energy particle guiding center orbit is calculated as a contour plot of conserved variable. • Current density profile is analyzed based on the orbit-driven current. • Plasma equilibrium is reconstructed by considering the hollow current profile. - Abstract: In the present RF-driven (ECCD) steady-state plasma on QUEST (B{sub t} = 0.25 T, R = 0.68 m, a = 0.40 m), plasma current seems to flow in the open magnetic surface outside of the closed magnetic surface in the low-field region according to plasma current fitting (PCF) method. We consider that the current in the open magnetic surface is due to orbit-driven current by high-energy particles in RF-driven plasma. So based on the analysis of current density profile based on the orbit-driven current, plasma equilibrium is to be calculated. We calculated high energy particles guiding center orbits as a contour plot of conserved variable in Hamiltonian formulation and considered particles initial position with different levels of energy and pitch angles that satisfy resonance condition. Then the profile of orbit-driven current is estimated by multiplying the particle density on the resonance surface and the velocity on the orbits. This analysis shows negative current near the magnetic axis and hollow current profile is expected even if pressure driven current is considered. Considering the hollow current profile shifted toward the low-field region, the equilibrium is fitted by J-EFIT coded by MATLAB.

  20. Dynamic Optimization of Trajectory for Ramp-up Current Profile in Tokamak Plasmas

    CERN Document Server

    Ren, Zhigang; Ou, Yongsheng

    2016-01-01

    In this paper, we consider an open-loop, finite-time, optimal control problem of attaining a specific desired current profile during the ramp-up phase by finding the best open-loop actuator input trajectories. Average density, total power, and plasma current are used as control actuators to manipulate the profile shape in tokamak plasmas. Based on the control parameterization method, we propose a numerical solution procedure directly to solve the original PDE-constrained optimization problem using gradient-based optimization techniques such as sequential quadratic programming (SQP). This paper is aimed at proposing an effective framework for the solution of PDE-constrained optimization problem in tokamak plasmas. A more user-friendly and efficient graphical user interface (GUI) is designed in MATLAB and the numerical simulation results are verified to demonstrate its applicability. In addition, the proposed framework of combining existing PDE and numerical optimization solvers to solve PDE-constrained optimiz...

  1. Current Profile Measurements from Moderate to Strong Lower Hybrid Single-Pass Damping on Alcator C-Mod

    Science.gov (United States)

    Mumgaard, R. T.; Wallace, G. M.; Scott, S. D.; Shiraiwa, S.; Faust, I.; Parker, R. R.

    2015-11-01

    Lower Hybrid Current Drive (LHCD) is an effective tool to non-inductively drive up to 100% of the plasma current on Alcator C-Mod. Measurements with an upgraded MSE diagnostic show that the fast-electron current profile is broader than the Ohmic current profile but still located the plasma core in agreement with strongly centrally peaked fast electron bremsstrahlung (FEB) measurements. Scans in a regime of high current drive efficiency across a range of density, LHCD power, launched n||, and plasma current show the driven current profile, FEB profile shapes, and current drive efficiency are sensitive only to total plasma current. Simulations using ray-tracing Fokker Planck codes show that the rays make 1-3 bounces through the plasma edge to bridge the spectral gap. Although in agreement with the total current, the simulations qualitatively disagree with experiment regarding current and FEB profiles as well as sensitivity to power and density. Simulations at higher plasma temperature and current predict stronger single-pass damping and preliminary experiments show increased current drive efficiency. Experiments to determine if the profile discrepancies persist when the ray bounces play a reduced role are planned, including companion experiments in D and He resulting in different edge plasma conditions. This work was performed on the Alcator C-Mod tokamak, a DoE Office of Science user facility, and is supported by USDoE awards DE-FC02-99ER54512 and DE-AC02-09CH11466.

  2. Measurement of ion velocity profiles in a magnetic reconnection layer via current sheet jogging

    Science.gov (United States)

    Stein, G.; Yoo, J.; Yamada, M.; Ji, H.; Dorfman, S.; Lawrence, E.; Myers, C.; Tharp, T.

    2011-10-01

    In many laboratory plasmas, constructing stationary Langmuir and Mach probe arrays with resolution on the order of electron skin depth is technically difficult, and can introduce significant plasma perturbations. However, complete two- dimensional profiles of plasma density, electron temperature, and ion flow are important for studying the transfer of energy from magnetic fields to particles during magnetic reconnection. Through the use of extra ``Shaping Field'' coils in the Magnetic Reconnection Experiment (MRX) at the Princeton Plasma Physics Laboratory, the inward motion of the current sheet in the reconnection layer can be accelerated, or ``jogged,'' allowing the measurement of different points across the sheet with stationary probes. By acquiring data from Langmuir probes and Mach probes at different locations in the MRX with respect to the current sheet center, profiles of electron density and temperature and a vector plot of two-dimensional ion velocity in the plane of reconnection are created. Results from probe measurements will be presented and compared to profiles generated from computer simulation.

  3. Calculation of the bootstrap current profile for the TJ-II stellarator

    CERN Document Server

    Velasco, J L; Lopez-Fraguas, A; Beidler, C D; Maassberg, H; Kernbichler, W; Castejon, F; Jimenez, J A

    2011-01-01

    Calculations of the bootstrap current for the TJ-II stellarator are presented. DKES and NEO-MC codes are employed; the latter has allowed, for the first time, the precise computation of the bootstrap transport coefficient in the long mean free path regime of this device. The low error bars allow a precise convolution of the monoenergetic coefficients, which is confirmed by error analysis. The radial profile of the bootstrap current is presented for the fist time for the 100_44_64 configuration of TJ-II for three different collisionality regimes. The bootstrap coefficient is then compared to that of other configurations of TJ-II regularly operated. The results show qualitative agreement with toroidal current measurements; precise comparison with real discharges is ongoing.

  4. Estimation of suspended sediment flux from acoustic Doppler current profiling along the Jinhae Bay entrance

    Institute of Scientific and Technical Information of China (English)

    WANG Yaping; CHU Yong Shik; LEE Hee Jun; HAN Choong Keun; OH Byung Chul

    2005-01-01

    A Nortek acoustic Doppler current profiler (NDP) was installed on a moving vessel to survey the entrance to the Jinhae Bay on August 22~23, 2001. The current velocity and acoustic backscattering signal were collected along two cross-sections; water samples were also collected during the measurement. The acoustic signals were normalized to compensate for the loss incurred by acoustic beam spreading in the seawater. The in situ calibration shows that a significant relationship is present between suspended sediment concentrations (SSC) and normalized acoustic signals. Two acoustic parameters have been determined to construct an acoustic-concentration model.Using this derived model, the SSC patterns along the surveyed cross-sections were obtained by the conversion of acoustic data. Using the current velocity and SSC data, the flux of suspended sediment was estimated. It indicates that the sediment transport into the bay through the entrance has an order of magnitude of 100 t per tidal cycle.

  5. High-resolution velocimetry in energetic tidal currents using a convergent-beam acoustic Doppler profiler

    Energy Technology Data Exchange (ETDEWEB)

    Sellar, Brian [Univ. of Edinburgh, Scotland (United Kingdom); Harding, Samuel F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Richmond, Marshall C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-07-16

    An array of convergent acoustic Doppler velocimeters has been developed and tested for the high resolution measurement of three-dimensional tidal flow velocities in an energetic tidal site. This configuration has been developed to increase spatial resolution of velocity measurements in comparison to conventional acoustic Doppler profilers (ADPs) which characteristically use diverging acoustic beams emanating from a single instrument. This is achieved using converging acoustic beams with a sample volume at the focal point of 0.03 m3. The array is also able to simultaneously measure three-dimensional velocity components in a profile throughout the water column, and as such is referred to herein as a converging-beam acoustic Doppler profiler (CADP). Mid-depth profiling is achieved through integration of the sensor platform with the operational Alstom 1MW DeepGen-IV Tidal Turbine. This proof-of-concept paper outlines system configuration and comparison to measurements provided by co-installed reference instrumentation. Comparison of CADP to standard ADP velocity measurements reveals a mean difference of 8 mm/s, standard deviation of 18 mm/s, and order-of-magnitude reduction in realizable length-scale. CADP focal point measurements compared to a proximal single-beam reference show peak cross-correlation coefficient of 0.96 over 4.0 s averaging period and a 47% reduction in Doppler noise. The dual functionality of the CADP as a profiling instrument with a high resolution focal point make this configuration a unique and valuable advancement in underwater velocimetry enabling improved turbulence, resource and structural loading quantification and validation of numerical simulations. Alternative modes of operation have been implemented including noise-reducing bi-static sampling. Since waves are simultaneously measured it is expected that derivatives of this system will be a powerful tool in wave-current interaction studies.

  6. High-resolution velocimetry in energetic tidal currents using a convergent-beam acoustic Doppler profiler

    Science.gov (United States)

    Sellar, Brian; Harding, Samuel; Richmond, Marshall

    2015-08-01

    An array of single-beam acoustic Doppler profilers has been developed for the high resolution measurement of three-dimensional tidal flow velocities and subsequently tested in an energetic tidal site. This configuration has been developed to increase spatial resolution of velocity measurements in comparison to conventional acoustic Doppler profilers (ADPs) which characteristically use divergent acoustic beams emanating from a single instrument. This is achieved using geometrically convergent acoustic beams creating a sample volume at the focal point of 0.03 m3. Away from the focal point, the array is also able to simultaneously reconstruct three-dimensional velocity components in a profile throughout the water column, and is referred to herein as a convergent-beam acoustic Doppler profiler (C-ADP). Mid-depth profiling is achieved through integration of the sensor platform with the operational commercial-scale Alstom 1 MW DeepGen-IV Tidal Turbine deployed at the European Marine Energy Center, Orkney Isles, UK. This proof-of-concept paper outlines the C-ADP system configuration and comparison to measurements provided by co-installed reference instrumentation. Comparison of C-ADP to standard divergent ADP (D-ADP) velocity measurements reveals a mean difference of 8 mm s-1, standard deviation of 18 mm s-1, and an order of magnitude reduction in realisable length scale. C-ADP focal point measurements compared to a proximal single-beam reference show peak cross-correlation coefficient of 0.96 over 4.0 s averaging period and a 47% reduction in Doppler noise. The dual functionality of the C-ADP as a profiling instrument with a high resolution focal point make this configuration a unique and valuable advancement in underwater velocimetry enabling improved quantification of flow turbulence. Since waves are simultaneously measured via profiled velocities, pressure measurements and surface detection, it is expected that derivatives of this system will be a powerful tool in

  7. Current profile redistribution driven by neutral beam injection in a reversed-field pinch

    Science.gov (United States)

    Parke, E.; Anderson, J. K.; Brower, D. L.; Den Hartog, D. J.; Ding, W. X.; Johnson, C. A.; Lin, L.

    2016-05-01

    Neutral beam injection in reversed-field pinch (RFP) plasmas on the Madison Symmetric Torus [Dexter et al., Fusion Sci. Technol. 19, 131 (1991)] drives current redistribution with increased on-axis current density but negligible net current drive. Internal fluctuations correlated with tearing modes are observed on multiple diagnostics; the behavior of tearing mode correlated structures is consistent with flattening of the safety factor profile. The first application of a parametrized model for island flattening to temperature fluctuations in an RFP allows inferrence of rational surface locations for multiple tearing modes. The m = 1, n = 6 mode is observed to shift inward by 1.1 ± 0.6 cm with neutral beam injection. Tearing mode rational surface measurements provide a strong constraint for equilibrium reconstruction, with an estimated reduction of q0 by 5% and an increase in on-axis current density of 8% ± 5%. The inferred on-axis current drive is consistent with estimates of fast ion density using TRANSP [Goldston et al., J. Comput. Phys. 43, 61 (1981)].

  8. Current profile redistribution driven by neutral beam injection in a reversed-field pinch

    Energy Technology Data Exchange (ETDEWEB)

    Parke, E. [Department of Physics and Astronomy, University of California Los Angeles 475 Portola Plaza, Los Angeles, California 90095 (United States); Department of Physics, University of Wisconsin-Madison 1150 University Ave., Madison, Wisconsin 53706 (United States); Anderson, J. K.; Den Hartog, D. J. [Department of Physics, University of Wisconsin-Madison 1150 University Ave., Madison, Wisconsin 53706 (United States); Brower, D. L.; Ding, W. X.; Lin, L. [Department of Physics and Astronomy, University of California Los Angeles 475 Portola Plaza, Los Angeles, California 90095 (United States); Johnson, C. A. [Department of Physics, University of Wisconsin-Madison 1150 University Ave., Madison, Wisconsin 53706 (United States); Department of Physics, Auburn University 206 Allison Laboratory, Auburn, Alabama 36849 (United States)

    2016-05-15

    Neutral beam injection in reversed-field pinch (RFP) plasmas on the Madison Symmetric Torus [Dexter et al., Fusion Sci. Technol. 19, 131 (1991)] drives current redistribution with increased on-axis current density but negligible net current drive. Internal fluctuations correlated with tearing modes are observed on multiple diagnostics; the behavior of tearing mode correlated structures is consistent with flattening of the safety factor profile. The first application of a parametrized model for island flattening to temperature fluctuations in an RFP allows inferrence of rational surface locations for multiple tearing modes. The m = 1, n = 6 mode is observed to shift inward by 1.1 ± 0.6 cm with neutral beam injection. Tearing mode rational surface measurements provide a strong constraint for equilibrium reconstruction, with an estimated reduction of q{sub 0} by 5% and an increase in on-axis current density of 8% ± 5%. The inferred on-axis current drive is consistent with estimates of fast ion density using TRANSP [Goldston et al., J. Comput. Phys. 43, 61 (1981)].

  9. Technical Note: Influence of Compton currents on profile measurements in small-volume ion chambers

    Energy Technology Data Exchange (ETDEWEB)

    Tanny, Sean; Sperling, Nicholas; Parsai, E. Ishmael, E-mail: e.parsai@utoledo.edu [Department of Radiation Oncology, University of Toledo Medical Center, 1325 Conference Drive, Toledo, Ohio 43614 (United States); Holmes, Shannon [Standard Imaging, 3120 Deming Way, Middleton, Wisconsin 53562 (United States)

    2015-10-15

    Purpose: This work is to evaluate the effects of Compton current generation in three small-volume ionization chambers on measured beam characteristics for electron fields. Methods: Beam scans were performed using Exradin A16, A26, and PTW 31014 microchambers. Scans with varying chamber components shielded were performed. Static point measurements, output factors, and cable only irradiations were performed to determine the contribution of Compton currents to various components of the chamber. Monte Carlo simulations were performed to evaluate why one microchamber showed a significant reduction in Compton current generation. Results: Beam profiles demonstrated significant distortion for two of the three chambers when scanned parallel to the chamber axis, produced by electron deposition within the wire. Measurements of ionization produced within the cable identified Compton current generation as the cause of these distortions. The size of the central collecting wire was found to have the greatest influence on the magnitude of Compton current generation. Conclusions: Microchambers can demonstrate significant (>5%) deviations from properties as measured with larger volume chambers (0.125 cm{sup 3} and above). These deviations can be substantially reduced by averaging measurements conducted at opposite polarities.

  10. Electrostatic potential profile and nonlinear current in an interacting one-dimensional molecular wire

    Indian Academy of Sciences (India)

    S Lakshmi; Swapan K Pati

    2003-10-01

    We consider an interacting one-dimensional molecular wire attached to two metal electrodes on either side of it. The electrostatic potential profile across the wire-electrode interface has been deduced solving the Schrodinger and Poisson equations self-consistently. Since the Poisson distribution crucially depends on charge densities, we have considered different Hamiltonian parameters to model the nanoscale wire. We find that for very weak electron correlations, the potential gradient is almost zero in the middle of the wire but are large near the chain ends. However, for strong correlations, the potential is essentially a ramp function. The nonlinear current, obtained from the scattering formalism, is found to be less with the ramp potential than for weak correlations. Some of the interesting features in current-voltage characteristics have been explained using one-electron formalism and instabilities in the system.

  11. GEOS-3 ocean current investigation using radar altimeter profiling. [Gulf Stream surface topography

    Science.gov (United States)

    Leitao, C. D.; Huang, N. E.; Parra, C. G.

    1978-01-01

    Both quasi-stationary and dynamic departures from the marine geoid were successfully detected using altitude measurements from the GEOS-3 radar altimeter. The quasi-stationary departures are observed either as elevation changes in single pass profiles across the Gulf Stream or at the crowding of contour lines at the western and northern areas of topographic maps generated using altimeter data spanning one month or longer. Dynamic features such as current meandering and spawned eddies can be monitored by comparing monthly mean maps. Comparison of altimeter inferred eddies with IR detected thermal rings indicates agreement of the two techniques. Estimates of current velocity are made using derived slope estimates in conjunction with the geostrophic equation.

  12. Tailored electron bunches with smooth current profiles for enhanced transformer ratios in beam-driven acceleration

    CERN Document Server

    Lemery, Francois

    2015-01-01

    Collinear high-gradient ${\\cal O} (GV/m)$ beam-driven wakefield methods for charged-particle acceleration could be critical to the realization of compact, cost-efficient, accelerators, e.g., in support of TeV-scale lepton colliders or multiple-user free-electron laser facilities. To make these options viable, the high accelerating fields need to be complemented with large transformer ratios $>2$, a parameter characterizing the efficiency of the energy transfer between a wakefield-exciting "drive" bunch to an accelerated "witness" bunch. While several potential current distributions have been discussed, their practical realization appears challenging due to their often discontinuous nature. In this paper we propose several alternative current profiles which are smooth which also lead to enhanced transformer ratios. We especially explore a laser-shaping method capable of generating one the suggested distributions directly out of a photoinjector and discuss a linac concept that could possible drive a dielectric ...

  13. Real-time identification of the current density profile in the JET Tokamak: method and validation

    CERN Document Server

    Mazon, Didier; Boulbe, Cédric; Faugeras, Blaise; Boboc, A; Brix, M; De Vries, P; Sharapov, S; Zabeo, L

    2009-01-01

    The real-time reconstruction of the plasma magnetic equilibrium in a Tokamak is a key point to access high performance regimes. Indeed, the shape of the plasma current density profile is a direct output of the reconstruction and has a leading effect for reaching a steady-state high performance regime of operation. In this paper we present the methodology followed to identify numerically the plasma current density in a Tokamak and its equilibrium. In order to meet the real-time requirements a C++ software has been developed using the combination of a finite element method, a nonlinear fixed point algorithm associated to a least square optimization procedure. The experimental measurements that enable the identification are the magnetics on the vacuum vessel, the interferometric and polarimetric measurements on several chords and the motional Stark effect. Details are given about the validation of the reconstruction on the JET tokamak, either by comparison with ?off-line' equilibrium codes or real time software ...

  14. Monitoring suspended sediment transport in an ice-affected river using acoustic Doppler current profilers

    Science.gov (United States)

    Moore, S. A.; Ghareh Aghaji Zare, S.; Rennie, C. D.; Ahmari, H.; Seidou, O.

    2013-12-01

    Quantifying sediment budgets and understanding the processes which control fluvial sediment transport is paramount to monitoring river geomorphology and ecological habitat. In regions that are subject to freezing there is the added complexity of ice. River ice processes impact flow distribution, water stage and sediment transport. Ice processes typically have the largest impact on sediment transport and channel morphodynamics when ice jams occur during ice cover formation and breakup. Ice jams may restrict flow and cause local acceleration when released. Additionally, ice can mechanically scour river bed and banks. Under-ice sediment transport measurements are lacking due to obvious safety and logistical reasons, in addition to a lack of adequate measurement techniques. Since some rivers can be covered in ice during six months of the year, the lack of data in winter months leads to large uncertainty in annual sediment load calculations. To address this problem, acoustic profilers are being used to monitor flow velocity, suspended sediment and ice processes in the Lower Nelson River, Manitoba, Canada. Acoustic profilers are ideal for under-ice sediment flux measurements since they can be operated autonomously and continuously, they do not disturb the flow in the zone of measurement and acoustic backscatter can be related to sediment size and concentration. In March 2012 two upward-facing profilers (1200 kHz acoustic Doppler current profiler, 546 KHz acoustic backscatter profiler) were installed through a hole in the ice on the Nelson River, 50 km downstream of the Limestone Generating Station. Data were recorded for four months, including both stable cover and breakup periods. This paper presents suspended sediment fluxes calculated from the acoustic measurements. Velocity data were used to infer the vertical distribution of sediment sizes and concentrations; this information was then used in the interpretation of the backscattered intensity data. It was found that

  15. On the suitability of longitudinal profile measurements using Coherent Smith-Purcell radiation for high current proton beams

    CERN Document Server

    Barros, Joanna; Vieille-Grosjean, Mélissa; Kittelmann, Irena Dolenc; Thomas, Cyrille

    2014-01-01

    The use of Smith-Purcell radiation to measure electrons longitudinal profiles has been demonstrated at several facilities in the picosecond and sub-picosecond range. There is a strong interest for the development of non intercepting longitudinal profile diagnostics for high current proton beams. We present here results of simulations on the expected yield of longitudinal profile monitors using Smith-Purcell radiation for such proton beams.

  16. An iterative algorithm for determining depth profiles of collection probability by electron-beam-induced current

    Science.gov (United States)

    Konovalov, Igor; Breitenstein, Otwin

    2001-01-01

    An iterative algorithm for the derivation of depth profiles of the minority carrier collection probability in a semiconductor with or without a coating on the top is presented using energy-resolved electron-beam-induced current measurements in planar geometry. The calculation is based on the depth-dose function of Everhart and Hoff (Everhart T E and Hoff P H 1971 J. Appl. Phys. 42 5837) and on the penetration-range function of Kanaya and Okayama (Kanaya K and Okayama S 1972 J. Phys. D: Appl. Phys. 5 43) or on that of Fitting (Fitting H-J 1974 Phys. Status Solidi/ a 26 525). It can also be performed with any other depth-dose functions. Using this algorithm does not require us to make any assumptions on the shape of the collection profile within the depth of interest. The influence of an absorbing top contact and/or a limited thickness of the semiconductor layer appear in the result, but can also be taken explicitly into account. Examples using silicon and CIS solar cells as well as a GaAs LED are presented.

  17. Force-free collisionless current sheet models with non-uniform temperature and density profiles

    Science.gov (United States)

    Wilson, F.; Neukirch, T.; Allanson, O.

    2017-09-01

    We present a class of one-dimensional, strictly neutral, Vlasov-Maxwell equilibrium distribution functions for force-free current sheets, with magnetic fields defined in terms of Jacobian elliptic functions, extending the results of Abraham-Shrauner [Phys. Plasmas 20, 102117 (2013)] to allow for non-uniform density and temperature profiles. To achieve this, we use an approach previously applied to the force-free Harris sheet by Kolotkov et al. [Phys. Plasmas 22, 112902 (2015)]. In one limit of the parameters, we recover the model of Kolotkov et al. [Phys. Plasmas 22, 112902 (2015)], while another limit gives a linear force-free field. We discuss conditions on the parameters such that the distribution functions are always positive and give expressions for the pressure, density, temperature, and bulk-flow velocities of the equilibrium, discussing the differences from previous models. We also present some illustrative plots of the distribution function in velocity space.

  18. Spatial profiles of interelectrode electron density in direct current superposed dual-frequency capacitively coupled plasmas

    Science.gov (United States)

    Ohya, Yoshinobu; Ishikawa, Kenji; Komuro, Tatsuya; Yamaguchi, Tsuyoshi; Takeda, Keigo; Kondo, Hiroki; Sekine, Makoto; Hori, Masaru

    2017-04-01

    We present experimentally determined spatial profiles of the interelectrode electron density (n e) in dual-frequency capacitively coupled plasmas in which the negative direct current (dc) bias voltage (V dc) is superposed; in the experiment, 13 MHz (P low) was applied to the lower electrode and 60 MHz (P high) to the upper electrode. The bulk n e increased substantially with increases in the external power, P high, P low, and with increases in V dc. When P low was insufficient, the bulk n e decreased as the V dc bias increased. The bulk n e increased due to its dependence on V dc, especially for |V dc|  >  500 V. This may correspond to the sheath voltages (V s) of the lower electrode. The n e values in front of the upper electrode were coupled with the V dc: the V dc dependence first decreased and then increased. The dc currents (I dc) of the upper electrode were collected when a large P low was applied. The value of I dc at the threshold value of V dc  ≈  V s (e.g.  ‑500 V) increased with an increase in n e. When |V dc| exceeded the threshold, the spatial n e profile and the I dc dependence were changed relative to the electrical characteristics of the dc superposition; this led to a change in the location of the maximum n e, the width of the area of n e depletion in front of the electrodes, and a transition in the electron heating modes.

  19. First-principles-driven model-based current profile control for the DIII-D tokamak via LQI optimal control

    Science.gov (United States)

    Boyer, Mark D.; Barton, Justin; Schuster, Eugenio; Luce, Tim C.; Ferron, John R.; Walker, Michael L.; Humphreys, David A.; Penaflor, Ben G.; Johnson, Robert D.

    2013-10-01

    In tokamak fusion plasmas, control of the spatial distribution profile of the toroidal plasma current plays an important role in realizing certain advanced operating scenarios. These scenarios, characterized by improved confinement, magnetohydrodynamic stability, and a high fraction of non-inductively driven plasma current, could enable steady-state reactor operation with high fusion gain. Current profile control experiments at the DIII-D tokamak focus on using a combination of feedforward and feedback control to achieve a targeted current profile during the ramp-up and early flat-top phases of the shot and then to actively maintain this profile during the rest of the discharge. The dynamic evolution of the current profile is nonlinearly coupled with several plasma parameters, motivating the design of model-based control algorithms that can exploit knowledge of the system to achieve desired performance. In this work, we use a first-principles-driven, control-oriented model of the current profile evolution in low confinement mode (L-mode) discharges in DIII-D to design a feedback control law for regulating the profile around a desired trajectory. The model combines the magnetic diffusion equations with empirical correlations for the electron temperature, resistivity, and non-inductive current drive. To improve tracking performance of the system, a nonlinear input transformation is combined with a linear-quadratic-integral (LQI) optimal controller designed to minimize a weighted combination of the tracking error and controller effort. The resulting control law utilizes the total plasma current, total external heating power, and line averaged plasma density as actuators. A simulation study was used to test the controller's performance and ensure correct implementation in the DIII-D plasma control system prior to experimental testing. Experimental results are presented that show the first-principles-driven model-based control scheme's successful rejection of input

  20. Influence of the shielding currents lengthscale and anisotropy effects on the magnetic flux profiles of high-temperature superconductors

    Science.gov (United States)

    Vanderbemden, P.; Lovchinov, V.

    2012-12-01

    The so-called "magnetic flux profile" AC inductive technique is a powerful method for determining the critical current density Jc of bulk superconductors. In this work we aim at reporting analytical expressions for magnetic flux profiles of superconducting rectangular samples exhibiting a critical current density anisotropy. The results are used for examining the error resulting from approximating a rectangular cross-section by an "infinite cylinder" or "infinite slab" geometry. It is found that such approximations can lead to an artificial curvature of the flux profiles and errors of 10%-20% in the determination of Jc. Next, the effects of how planar defects (cracks, platelet boundaries,...) affect the magnetic flux profile signal are discussed. It is found that the magnetic flux profiles are much sensitive to the lengthscale of shielding currents, thereby providing means of investigation of the typical size of induced current loops in bulk superconductors. Finally some illustrative flux profile data measured on a bulk, large grain melt-processed YBCO single domain exhibiting Jc anisotropy are presented and discussed in relation with theoretical predictions.

  1. An Algorithm for Surface Current Retrieval from X-band Marine Radar Images

    Directory of Open Access Journals (Sweden)

    Chengxi Shen

    2015-06-01

    Full Text Available In this paper, a novel current inversion algorithm from X-band marine radar images is proposed. The routine, for which deep water is assumed, begins with 3-D FFT of the radar image sequence, followed by the extraction of the dispersion shell from the 3-D image spectrum. Next, the dispersion shell is converted to a polar current shell (PCS using a polar coordinate transformation. After removing outliers along each radial direction of the PCS, a robust sinusoidal curve fitting is applied to the data points along each circumferential direction of the PCS. The angle corresponding to the maximum of the estimated sinusoid function is determined to be the current direction, and the amplitude of this sinusoidal function is the current speed. For validation, the algorithm is tested against both simulated radar images and field data collected by a vertically-polarized X-band system and ground-truthed with measurements from an acoustic Doppler current profiler (ADCP. From the field data, it is observed that when the current speed is less than 0.5 m/s, the root mean square differences between the radar-derived and the ADCP-measured current speed and direction are 7.3 cm/s and 32.7°, respectively. The results indicate that the proposed procedure, unlike most existing current inversion schemes, is not susceptible to high current speeds and circumvents the need to consider aliasing. Meanwhile, the relatively low computational cost makes it an excellent choice in practical marine applications.

  2. Theory and signal processing of acoustic correlation techniques for current velocity measurement

    Institute of Scientific and Technical Information of China (English)

    ZHU Weiqing; FENG Lei; WANG Changhong; WANG Yuling; QIU Wei

    2008-01-01

    A theoretical model and signal processing of acoustic correlation measurements to estimate current velocity are discussed. The sonar space-time correlation function of vol-ume reverberations within Fraunhofer zone is derived. The function, which is in exponential forms, is the theoretical model of acoustic correlation measurements. The characteristics of the correlation values around the maximum of the amplitude of the correlation function, where most information about current velocity is contained, are primarily analyzed. Localized Least Mean Squares (LLMS) criterion is put forward for velocity estimation. Sequential Quadratic Programming (SQP) method is adopted as the optimization method. So the systematic sig-nal processing method of acoustic correlation techniques for current velocity measurement is established. A prototype acoustic correlation current profiler (ACCP) underwent several sea trials, the results show that theoretical model approximately coincides with experimental re-sults. Current profiles including the speed and direction from ACCP are compared with those from acoustic Doppler current profiler (ADCP). The current profiles by both instruments agree reasonably well. Also, the standard deviation of velocity measurement by ACCP is statistically calculated and it is a little larger than predicted value.

  3. Profile of L-type Ca2+ current and Na+/Ca2+ exchange current during cardiac action potential in ventricular myocytes

    Science.gov (United States)

    Banyasz, Tamas; Horvath, Balazs; Jian, Zhong; Izu, Leighton T.; Chen-Izu, Ye

    2011-01-01

    Objective The L-type Ca2+ current (ICa,L) and the Na+/Ca2+ exchange current (INCX) are major inward currents that shape the cardiac action potential (AP). Previously, the profile of these currents during AP was determined from voltage-clamp experiments that used Ca2+ buffer. In this study, we aimed to obtain direct experimental measurement of these currents during cardiac AP with Ca2+ cycling. Method A newly developed AP-clamp sequential dissection method was used to record ionic currents in guinea pig ventricular myocytes under a triad of conditions: using the cell’s own AP as the voltage command, using internal and external solutions that mimic the cell’s ionic composition and, importantly, no exogenous Ca2+ buffer was used. Results The nifedipine-sensitive current (INIFE), which is composed of ICa,L and INCX, revealed hitherto unreported features during AP with Ca2+ cycling in the cell. We identified two peaks in the current profile followed by a long residual current extending beyond the AP, coinciding with a residual depolarization. The second peak and the residual current become apparent only when Ca2+ is not buffered. Pharmacological dissection of INIFE using SEA0400 shows that ICa,L is dominant during phase-1&2 whereas INCX contributes significantly to the inward current at phase-3&4 of AP. Conclusion These data provide the first direct experimental visualization of ICa,L and INCX during cardiac AP and Ca2+ cycle. The residual current reported here can serve as a potential substrate for afterdepolarizations when increased under pathologic conditions. PMID:21884673

  4. Innovative real-time and non-destructive method of beam profile measurement under large beam current irradiation for BNCT

    Energy Technology Data Exchange (ETDEWEB)

    Takada, M., E-mail: m_takada@nirs.go.jp [National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Kamada, S.; Suda, M. [National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Fujii, R.; Nakamura, M. [Cancer Intelligence Care Systems, Inc., 3-5-7 Ariake, Koto-ku, Tokyo 135-0063 (Japan); Hoshi, M. [Research Institute for Radiation Biology and Medicine, Hiroshima University, 1-2-3 kasumi, Minami-ku, Hiroshima 734-8553 (Japan); Sato, H. [Ibaraki Prefectural University of Health Sciences, 4669-2, Ami Ami-Cho, Inashiki-gun, Ibaraki 300-0394 (Japan); Endo, S. [Quantum Energy Applications, Graduate School of Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi-Hiroshima 739-8527 (Japan); Hamano, T. [National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Arai, S.; Higashimata, A. [Sanki Industry Co., 318-6, Sannoh, Inage-ku, Chiba 263-0002 (Japan)

    2012-10-11

    We developed a real-time and non-destructive method of beam profile measurement on a target under large beam current irradiation, and without any complex radiation detectors or electrical circuits. We measured the beam profiles on a target by observing the target temperature using an infrared-radiation thermometer camera. The target temperatures were increased and decreased quickly by starting and stopping the beam irradiation within 1 s in response speed. Our method could trace beam movements rapidly. The beam size and position were calibrated by measuring O-ring heat on the target. Our method has the potential to measure beam profiles at beam current over 1 mA for proton and deuteron with the energy around 3 MeV and allows accelerator operators to adjust the beam location during beam irradiation experiments without decreasing the beam current.

  5. Dependency of Tearing Mode Stability on Current and Pressure Profiles in DIII-D Hybrid Discharges

    Science.gov (United States)

    Kim, K.; Park, J. M.; Murakami, M.; La Haye, R. J.; Na, Y.-S.; SNU/ORAU; ORNL; Atomics, General; SNU; DIII-D Team

    2016-10-01

    Understanding the physics of the onset and evolution of tearing modes (TMs) in tokamak plasmas is important for high- β steady-state operation. Based on DIII-D steady-state hybrid experiments with accurate equilibrium reconstruction and well-measured plasma profiles, the 2/1 tearing mode can be more stable with increasing local current and pressure gradient at rational surface and with lower pressure peaking and plasma inductance. The tearing stability index Δ', estimated by the Rutherford equation with experimental mode growth rate was validated against Δ' calculated by linear eigenvalue solver (PEST3); preliminary comprehensive MHD modeling by NIMROD reproduced the TM onset reasonably well. We present a novel integrated modeling for the purpose of predicting TM onset in experiment by combining a model equilibrium reconstruction using IPS/FASTRAN, linear stability Δ' calculation using PEST3, and fitting formula for critical Δ' from NIMROD. Work supported in part by the US DoE under DE-AC05-06OR23100, DE-AC05-00OR22725, and DEFC02-04ER54698.

  6. Current and hydrographic conditions at the East Flower Garden Bank in 2011

    Science.gov (United States)

    Teague, W. J.; Wijesekera, H. W.; Jarosz, E.; Fribance, D. B.; Lugo-Fernández, A.; Hallock, Z. R.

    2013-07-01

    The East Flower Garden Bank (EFGB), part of the Flower Garden Banks National Marine Sanctuary, is located in the northwestern Gulf of Mexico, about 185 km southeast of Galveston, Texas. With a width of about 5 km, the steep-sided bank rises from water depths of over 100 m to within less than 20 m of the surface. Four acoustic Doppler current profiler (ADCP) moorings and four temperature/salinity strings were deployed around the EFGB with an additional ADCP on top of the bank for about 1 year. The main objective was to understand the ocean processes over the EFGB and to examine the importance of the topographically induced processes on shelf edge circulation on longer (e.g. days to seasonal) time scales. Currents were generally eastward over the bank in the upper water column. Eddy events occasionally reversed the eastward flow for a few days. Currents in the lower water column tended to align with the bank's bathymetry and mostly were directed offshore at the southern edge of the bank. Wind and eddy events moved both shelf and off-shelf waters over the bank, including waters from as deep as 200 m through upwelling and/or mixing processes. Mixed layers changed by as much as 50 m in a couple of days. Inertial currents occurred throughout the year and were often much larger than the tidal currents. Commonly, the inertial currents were strong enough to reverse the predominantly eastward current flow on time scales of less than a day. Westward propagating cyclonic eddies (often associated with anticyclonic eddies) likely connect biological activities of the EFGB with the West Flower Garden Bank. Banks such as the EFGB, with large aspect ratios and heights, strongly alter circulation and enhance exchange processes at the shelf break.

  7. Currents, temperature, and salinity data recorded continuously from May 12, 2010 to December 16, 2010 from the surface to 1000 meters at a coastal location near the 1600 meters isobath off SW Oahu, Hawaii (NODC Accession 0072305)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The dataset contains ADCP Workhorse Long Ranger current records from 50 to 950m depth and Seabird CTD at 20, 80, 130, 230, 500, 850, and 1000m, recorded continuously...

  8. Applications of Bayesian temperature profile reconstruction to automated comparison with heat transport models and uncertainty quantification of current diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Irishkin, M. [CEA, IRFM, F-13108 Saint-Paul-Lez-Durance (France); Imbeaux, F., E-mail: frederic.imbeaux@cea.fr [CEA, IRFM, F-13108 Saint-Paul-Lez-Durance (France); Aniel, T.; Artaud, J.F. [CEA, IRFM, F-13108 Saint-Paul-Lez-Durance (France)

    2015-11-15

    Highlights: • We developed a method for automated comparison of experimental data with models. • A unique platform implements Bayesian analysis and integrated modelling tools. • The method is tokamak-generic and is applied to Tore Supra and JET pulses. • Validation of a heat transport model is carried out. • We quantified the uncertainties due to Te profiles in current diffusion simulations. - Abstract: In the context of present and future long pulse tokamak experiments yielding a growing size of measured data per pulse, automating data consistency analysis and comparisons of measurements with models is a critical matter. To address these issues, the present work describes an expert system that carries out in an integrated and fully automated way (i) a reconstruction of plasma profiles from the measurements, using Bayesian analysis (ii) a prediction of the reconstructed quantities, according to some models and (iii) a comparison of the first two steps. The first application shown is devoted to the development of an automated comparison method between the experimental plasma profiles reconstructed using Bayesian methods and time dependent solutions of the transport equations. The method was applied to model validation of a simple heat transport model with three radial shape options. It has been tested on a database of 21 Tore Supra and 14 JET shots. The second application aims at quantifying uncertainties due to the electron temperature profile in current diffusion simulations. A systematic reconstruction of the Ne, Te, Ti profiles was first carried out for all time slices of the pulse. The Bayesian 95% highest probability intervals on the Te profile reconstruction were then used for (i) data consistency check of the flux consumption and (ii) defining a confidence interval for the current profile simulation. The method has been applied to one Tore Supra pulse and one JET pulse.

  9. Overview of hydro-acoustic current-measurement applications by the U.S. geological survey in Indiana

    Science.gov (United States)

    Morlock, Scott E.; Stewart, James A.

    1999-01-01

    The U.S. Geological Survey (USGS) maintains a network of 170 streamflow-gaging stations in Indiana to collect data from which continuous records of river discharges are produced. Traditionally, the discharge record from a station is produced by recording river stage and making periodic discharge measurements through a range of stage, then developing a relation between stage and discharge. Techniques that promise to increase data collection accuracy and efficiency include the use of hydro-acoustic instrumentation to measure river velocities. The velocity measurements are used to compute river discharge. In-situ applications of hydro-acoustic instruments by the USGS in Indiana include acoustic velocity meters (AVM's) at six streamflow-gaging stations and newly developed Doppler velocity meters (DVM's) at two stations. AVM's use reciprocal travel times of acoustic signals to measure average water velocities along acoustic paths, whereas DVM's use the Doppler shift of backscattered acoustic signals to compute water velocities. In addition to the in-situ applications, three acoustic Doppler current profilers (ADCP's) are used to make river-discharge measurements from moving boats at streamflow-gaging stations in Indiana. The USGS has designed and is testing an innovative unmanned platform from which to make ADCP discharge measurements.

  10. Charge and current density profiles of a degenerate magnetized free-electron gas near a hard wall

    NARCIS (Netherlands)

    M.M. Kettenis; L.G. Suttorp

    1998-01-01

    The charge and current densities of a completely degenerate free-electron gas in a uniform magnetic field are found to have a damped oscillatory spatial dependence near a wall that is parallel to the magnetic field. For large distances from the wall the behaviour of the associated profile functions

  11. Temporal variations of zooplankton biomass in the Ligurian Sea inferred from long time series of ADCP data

    Directory of Open Access Journals (Sweden)

    R. Bozzano

    2013-08-01

    Full Text Available Three years of 300 kHz ADCP data collected in the central Ligurian Sea are analyzed to investigate the variability of the zooplankton biomass and the Diel Vertical Migrations (DVM in the upper thermocline. After a pre-processing aimed at avoiding the slant range attenuation, hourly volume backscattering strength time series are obtained. Despite the lack of concurrent net samples collection, different migration patterns are identified and their temporal variability examined by means of time-frequency analysis. The effect of changes in the environmental condition is also investigated. Highest zooplankton biomasses are observed in April–May just after the peak of surface primary production in March–April. The main migration pattern points to a "nocturnal" migration with zooplankton organisms occurring deeper in the water column during the day and shallower at night. Also twilight migration is highlighted during this study. The largest migrations are recorded in November–December, corresponding to lowest backscattering strength values and are likely attributable to larger and more active organisms (i.e. euphausiids and mesopelagic fish. The results suggest further applications of the historical ADCP time series available.

  12. The western South China Sea currents from measurements by Argo profiling floats during October to December 2007

    Institute of Scientific and Technical Information of China (English)

    周慧; 袁东亮; 李瑞祥; 何蕾

    2010-01-01

    The three dimensional structure of the western boundary current east of the Vietnam coast was determined from measurements by Argo profiling floats which deployed near the east of the Vietnam Coast in October 2007. The trajectories of the Argo floats provided robust evidence that there does exist southward flowing current along the Vietnam coast. The southward current begins at about 15°N, 111°E, flowing along the 1 000 m isobath and extending to 5°N south. The estimated surface and parking depth velocities...

  13. Observing Magnetic and Current Profiles of the Night side and Terminator of Mars through the Mars Global Surveyor Data

    Science.gov (United States)

    Ponce, N.; Fillingim, M. O.; Fogle, A. L.

    2014-12-01

    Mars has no global magnetic field. Changes in the solar wind and interplanetary magnetic field can impact the upper atmosphere and induce currents in the ionosphere of Mars. During aerobraking maneuvers, Mars Global Surveyor (MGS) made over 1000 passes through Mars's ionosphere. During these passes, MGS measured the local magnetic field. From these measurements, we can determine the ionospheric currents. We restrict our analysis to passes where the radial component of the magnetic field is nearly zero. This restriction, along with some assumptions about the gradients in the magnetic field, allows us to estimate the horizontal ionospheric currents. Additionally, we focus on the magnetic field data acquired over regions above negligible crustal magnetic fields in order to simplify the analysis. At a maximum altitude of 250 km, the Mars map was segmented to 30 by 30 degrees east longitude and latitude for analysis. We find that on the night side, where the solar zenith angle (SZA) lies between 130 to 180 degrees, only 4% of the data (out of a total of 52 profiles) is usable for computing currents, that is the radial component of the magnetic field is nearly zero. We also find that near the terminator, where the SZA lies between 50 to 130 degrees, an average of 2% of the magnetic field profiles (out of 1905) are usable to compute currents. This implies that currents are rarely horizontal (as required by our assumptions) in these regions. The currents computed from these profiles can give us insights into how the changing solar wind and interplanetary magnetic field can affect the upper atmosphere of Mars. For example, induced currents can lead to Joule heating of the atmosphere potentially modifying the neutral dynamics.

  14. Sensitivity of transport and stability to the current profile in steady-state scenario plasmas in DIII-D

    Energy Technology Data Exchange (ETDEWEB)

    Turco, F.; Hanson, J. M. [Columbia University, New York, New York 10027 (United States); Holcomb, C. T. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States); Ferron, J. R.; Luce, T. C.; Politzer, P. A.; Turnbull, A. D. [General Atomics, P.O. Box 85608, San Diego, California 92186-5608 (United States); Park, J. M. [Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); White, A. E. [Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Brennan, D. P. [University of Tulsa, Tulsa, Oklahoma 74104 (United States); Okabayashi, M. [Princeton Plasma Physics Laboratory, Princeton 08543, New Jersey (United States); In, Y. [Far-Tech, Inc., San Diego, California 92121 (United States)

    2012-12-15

    Recent experiments on DIII-D have provided the first systematic data on the impact of the current profile on the transport and stability properties of high-performance, steady-state scenario plasmas. In a future tokamak, to achieve 100% noninductive conditions and produce net power, the current profile J must be sustained by a large fraction of bootstrap current J{sub BS}, which is nonlinearly coupled with the kinetic profiles. Systematic scans of q{sub min} and q{sub 95} were performed to determine empirically the best alignment of the noninductive currents with J and the variation of the transport properties with q. Transport analysis indicates that {chi}{sub e} and {chi}{sub i} are sensitive to the details of J in a way that makes the pressure profile peaking and J{sub BS} scale nonlinearly with both q and {beta} in the experiment. Drift wave stability analysis yields linear growth rates that do not reproduce experimental trends in {chi} with q{sub min} and q{sub 95}. At high beta, necessary to maximize f{sub BS}, the plasma duration is often limited by n=1 tearing modes, whose stability also depends on the J profile. Broadly deposited electron cyclotron (EC) current at mid-radius was found to supply part of the required noninductive current and to positively affect the tearing stability. The modes appear when J{sub EC} is turned off for stable cases and always appear when the EC deposition is shifted outwards. The variation in the EC scan results is consistent with PEST3 calculations, showing that the tearing stability becomes extremely sensitive to small perturbations of the equilibrium in wall-stabilized plasmas run close to the ideal MHD limit. These modeling results are being used to design new experiments with higher ideal and tearing limits. A new capability for off-axis neutral beam injection system will be used to explore higher q{sub min} scenarios and different current alignments.

  15. Model-based Optimization and Feedback Control of the Current Density Profile Evolution in NSTX-U

    Science.gov (United States)

    Ilhan, Zeki Okan

    Nuclear fusion research is a highly challenging, multidisciplinary field seeking contributions from both plasma physics and multiple engineering areas. As an application of plasma control engineering, this dissertation mainly explores methods to control the current density profile evolution within the National Spherical Torus eXperiment-Upgrade (NSTX-U), which is a substantial upgrade based on the NSTX device, which is located in Princeton Plasma Physics Laboratory (PPPL), Princeton, NJ. Active control of the toroidal current density profile is among those plasma control milestones that the NSTX-U program must achieve to realize its next-step operational goals, which are characterized by high-performance, long-pulse, MHD-stable plasma operation with neutral beam heating. Therefore, the aim of this work is to develop model-based, feedforward and feedback controllers that can enable time regulation of the current density profile in NSTX-U by actuating the total plasma current, electron density, and the powers of the individual neutral beam injectors. Motivated by the coupled, nonlinear, multivariable, distributed-parameter plasma dynamics, the first step towards control design is the development of a physics-based, control-oriented model for the current profile evolution in NSTX-U in response to non-inductive current drives and heating systems. Numerical simulations of the proposed control-oriented model show qualitative agreement with the high-fidelity physics code TRANSP. The next step is to utilize the proposed control-oriented model to design an open-loop actuator trajectory optimizer. Given a desired operating state, the optimizer produces the actuator trajectories that can steer the plasma to such state. The objective of the feedforward control design is to provide a more systematic approach to advanced scenario planning in NSTX-U since the development of such scenarios is conventionally carried out experimentally by modifying the tokamak's actuator

  16. A simple model for the short-time evolution of near-surface current and temperature profiles

    CERN Document Server

    Jenkins, A D; Jenkins, Alastair D.; Ward, Brian

    2005-01-01

    A simple analytical/numerical model has been developed for computing the evolution, over periods of up to a few hours, of the current and temperature profile in the upper layer of the ocean. The model is based upon conservation laws for heat and momentum, and employs an eddy diffusion parameterisation which is dependent on both the wind speed and the wind stress applied at the sea surface. Other parameters such as the bulk-skin surface temperature difference and CO$_2$ flux are determined by application of the Molecular Oceanic Boundary Layer Model (MOBLAM) of Schluessel and Soloviev. A similar model, for the current profile only, predicts a temporary increase in wave breaking intensity and decrease in wave height under conditions where the wind speed increases suddenly, such as, for example, during gusts and squalls. The model results are compared with measurements from the lagrangian Skin Depth Experimental Profiler (SkinDeEP) surface profiling instrument made during the 1999 MOCE-5 field experiment in the ...

  17. Pharmacological profile of the ATP-mediated increase in L-type calcium current amplitude and activation of a non-specific cationic current in rat ventricular cells.

    OpenAIRE

    Scamps, F.; Vassort, G.

    1994-01-01

    1. The pharmacological profile of the ATP-induced increase in ICa amplitude and of ATP activation of a non-specific cationic current, IATP, was investigated in rat ventricular cells. 2. The EC50 values for ICa increase and IATP activation were 0.36 microM and 0.76 microM respectively. Suramin (10 microM) and cibacron blue (1 microM) competitively antagonized both effects of ATP. 3. The rank order of efficacy and potency of ATP analogues in increasing ICa amplitude was 2-methylthio-ATP approxi...

  18. Current meter and temperature profile data from current meter and buoy casts in the TOGA area of Pacific Ocean from 27 April 1993 to 09 June 1994 (NODC Accession 9700042)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter and temperature profile data were collected using current meter and buoy casts in the TOGA area of Pacific Ocean from 27 April 1993 to 09 June 1994....

  19. Ocean currents measured by Shipboard Acoustic Doppler Current Profiler (SADCP) from global oceans as part of the Joint Archive for SADCP holdings from 20 August 1999 to 13 May 2009 (NCEI Accession 0067774)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Absolute U- and V-component ocean current vectors from Shipboard Acoustic Doppler Current Profilers (SADCP), as both a high-frequency sampling (nominally 5 minutes...

  20. Magnetic diagnostics: general principles and the problem of reconstruction of plasma current and pressure profiles in toroidal systems

    Energy Technology Data Exchange (ETDEWEB)

    Pustovitov, V.D.

    2000-04-01

    The restrictions of the magnetic diagnostics are discussed. Being related to the integral nature of the measurable quantities, they follow from the fundamental laws of electromagnetism. A series of particular examples demonstrating the strength of these restrictions is given and analyzed. A general rule is emphasized that the information obtained from external magnetic measurements is obviously insufficient for the reliable evaluation of plasma current and pressure profiles in tokamaks or in stellarators. The underlying reason is that outside the plasma the own field of the equilibrium plasma currents is determined by the boundary conditions on the plasma surface only. (author)

  1. High-current CW beam profile monitors using transition radiation at CEBAF

    Science.gov (United States)

    Piot, P.; Denard, J.-C.; Adderley, P.; Capek, K.; Feldl, E.

    1997-01-01

    One way of measuring the profile of CEBAF's low-emittance, high-power beam is to use the optical transition radiation (OTR) emitted from a thin foil surface when the electron beam passes through it. We present the design of a monitor using the forward OTR emitted from a 0.25-μm carbon foil. We believe that the monitor will resolve three main issues: i) whether the maximum temperature of the foil stays below the melting point, ii) whether the beam loss remains below 0.5%, in order not to trigger the machine protection system, and iii) whether the monitor resolution (unlike that of synchrotron radiation monitors) is better than the product λγ. It seems that the most serious limitation for CEBAF is the beam loss due to beam scattering. We present results from Keil's theory and simulations from the computer code GEANT as well as measurements with aluminum foils with a 45-MeV electron beam. We also present a measurement of a 3.2-GeV beam profile that is much smaller than λγ, supporting Rule and Fiorito's calculations of the OTR resolution limit due to diffraction.

  2. Field Aligned Currents Derived from Pressure Profiles Obtained from TWINS ENA Images

    Science.gov (United States)

    Wood, K.; Perez, J. D.; McComas, D. J.; Goldstein, J.; Valek, P. W.

    2015-12-01

    Field aligned currents (FACs) that flow from the Earth's magnetosphere into the ionosphere are an important coupling mechanism in the interaction of the solar wind with the Earth's magnetosphere. Assuming pressure balance along with charge conservation yields an expression for the FACs in terms of plasma pressure gradients and pressure anisotropy. The Two Wide-Angle Imaging Neutral Atom Spectrometers (TWINS) mission, the first stereoscopic ENA magnetospheric imager, provides global images of the inner magnetosphere from which ion pressure distributions and pressure anisotropies can be obtained. Following the formulations in Heineman [1990] and using results from TWINS observations, we calculate the distribution of field aligned currents for the 17-18 March 2015 geomagnetic storm in which extended ionospheric precipitation was observed. Initial results for the field aligned currents will be generated assuming an isotropic pitch angle distribution. Global maps of field aligned currents during the main and recovery phase of the storm will be presented. Heinemann, H. (1990), Representations of Currents and Magnetic Fields in Anisotropic Magnetohydrostatic Plasma, J. Geophys. Res., 95, 7789.

  3. Addressing the current bottlenecks of metabolomics: Isotopic Ratio Outlier Analysis™, an isotopic-labeling technique for accurate biochemical profiling.

    Science.gov (United States)

    de Jong, Felice A; Beecher, Chris

    2012-09-01

    Metabolomics or biochemical profiling is a fast emerging science; however, there are still many associated bottlenecks to overcome before measurements will be considered robust. Advances in MS resolution and sensitivity, ultra pressure LC-MS, ESI, and isotopic approaches such as flux analysis and stable-isotope dilution, have made it easier to quantitate biochemicals. The digitization of mass spectrometers has simplified informatic aspects. However, issues of analytical variability, ion suppression and metabolite identification still plague metabolomics investigators. These hurdles need to be overcome for accurate metabolite quantitation not only for in vitro systems, but for complex matrices such as biofluids and tissues, before it is possible to routinely identify biomarkers that are associated with the early prediction and diagnosis of diseases. In this report, we describe a novel isotopic-labeling method that uses the creation of distinct biochemical signatures to eliminate current bottlenecks and enable accurate metabolic profiling.

  4. Monitoring of the current profile by using cyclotronic electron waves in tokamaks; Controle du profil de courant par ondes cyclotroniques electroniques dans les tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Dumont, R

    2001-08-01

    The subject of this thesis is the study of the cyclotronic electron wave as a monitoring tool of the current profile. The first chapter is dedicated to basic notions concerning tokamak plasmas and current generation. The second chapter is centered on the use of fast electrons to generate current and on its modelling. The propagation and absorption of the cyclotronic electron wave require a specific polarization state whose characteristics must be carefully chosen according to some parameters of the discharge, the chapter 3 deals with this topic. The absorption of a wave in a plasma depends greatly on the velocity distribution of the particles that make up the plasma and this distribution is constantly modified by the energy of the wave, so this phenomenon is non-linear and its physical description is difficult. In a case of a fusion plasma, a sophisticated approximation called quasi-linear theory can be applied with some restrictions that are presented in chapter 4. Chapters 5 and 6 are dedicated to kinetics scenarios involving the low hybrid wave and the cyclotronic electron wave inside the plasma. Some experiments dedicated to the study of the cyclotronic electron wave have been performed in Tore-supra (France) and FTU (Italy) tokamaks, they are presented in the last chapter. (A.C.)

  5. CURRENT HIGHLIGHTS OF THE PSIHOSOCIOPROFESIONAL PROFILE OF THE TOP MANAGER IN THE ROMANIAN JUDICIARY

    Directory of Open Access Journals (Sweden)

    MUSCALU EMANOIL

    2015-04-01

    Full Text Available Judicial managers, as a particular category of public managers, have the challenging mission of leading the courts using successful methods and techniques used by the private sector, and in the same time strictly respect the limitations and requirements imposed by law and as well they have to take into account the judicial organization’s characteristics and the special status of the magistrates who activate in this system. In this context, outlining the successful manager’s profile in field of justice gets special valences and requires a multiple perspective approach. Clearly, the quality in the judicial organizations is decisively linked to the way managers use their own skills, knowledge, conducts and attitudes in order to create an appropriate organizational environment for professional development and complete involvement of staff. Moreover, they must assume the role of a leader and provide the positive personal example to motivate and inspire the subordinates.

  6. Wave-current interactions in deep water conditions: field measurements and analyses

    Science.gov (United States)

    Rougier, Gilles; Rey, Vincent; Molcard, Anne

    2015-04-01

    The study of wave - current interaction has drawn interest in oceanography, ocean engineering, maritime navigation and for tides or waves power device design. In the context of the hydrodynamics study along the French Mediterranean coast, a current profiler was deployed near Toulon at the south of the "Port Cros" island. This coastal zone is characterized by a steep slope, the water depth varying from tens meters to several thousand meters over few kilometers from the coast. An ambient current, the "Northern Current", coming from the Ligurian sea (area of Genoa, Italy) and following the coast up to Toulon, is present all over the year. Its mean surface velocity is of about 0.30 m/s, its flow rate of about 1.5 Sv. The region is exposed to two dominating winds: the Mistral, coming from North-West, and Eastern winds. Both generate swell and/or wind waves in either following or opposing current conditions with respect to the Northern Current. A current profiler equipped with a wave tracking system (ACPD workhorse from RDI) was deployed from July to October 2014 in deep water conditions (depth of about 500m). The mooring system allowed the ADCP to measure the current profile from the sea surface down to 25m depth, which corresponds more or less to the depth of influence of waves of periods up to 10s. The collected data include energetic wave conditions in either following or opposing current conditions. The current intensity and its vertical profiles have shown a significant temporal variability according to the meteorological conditions. Effects of the wave conditions on the current properties are discussed. ACKNOWLEDGEMENTS This work was supported by the program BOMBYX and the ANR grant No ANR-13-ASTR-0007.

  7. Surface profile gradient in amorphous Ta2O5 semi conductive layers regulates nanoscale electric current stability

    Science.gov (United States)

    Cefalas, A. C.; Kollia, Z.; Spyropoulos-Antonakakis, N.; Gavriil, V.; Christofilos, D.; Kourouklis, G.; Semashko, V. V.; Pavlov, V.; Sarantopoulou, E.

    2017-02-01

    A link between the morphological characteristics and the electric properties of amorphous layers is established by means of atomic, conductive, electrostatic force and thermal scanning microscopy. Using amorphous Ta2O5 (a-Ta2O5) semiconductive layer, it is found that surface profile gradients (morphological gradient), are highly correlated to both the electron energy gradient of trapped electrons in interactive Coulombic sites and the thermal gradient along conductive paths and thus thermal and electric properties are correlated with surface morphology at the nanoscale. Furthermore, morphological and electron energy gradients along opposite conductive paths of electrons intrinsically impose a current stability anisotropy. For either long conductive paths (L > 1 μm) or along symmetric nanodomains, current stability for both positive and negative currents i is demonstrated. On the contrary, for short conductive paths along non-symmetric nanodomains, the set of independent variables (L, i) is spanned by two current stability/intability loci. One locus specifies a stable state for negative currents, while the other locus also describes a stable state for positive currents.

  8. Current Fluctuations in One Dimensional Diffusive Systems with a Step Initial Density Profile

    Science.gov (United States)

    Derrida, Bernard; Gerschenfeld, Antoine

    2009-12-01

    We show how to apply the macroscopic fluctuation theory (MFT) of Bertini, De Sole, Gabrielli, Jona-Lasinio, and Landim to study the current fluctuations of diffusive systems with a step initial condition. We argue that one has to distinguish between two ways of averaging (the annealed and the quenched cases) depending on whether we let the initial condition fluctuate or not. Although the initial condition is not a steady state, the distribution of the current satisfies a symmetry very reminiscent of the fluctuation theorem. We show how the equations of the MFT can be solved in the case of non-interacting particles. The symmetry of these equations can be used to deduce the distribution of the current for several other models, from its knowledge (Derrida and Gerschenfeld in J. Stat. Phys. 136, 1-15, 2009) for the symmetric simple exclusion process. In the range where the integrated current Qt˜sqrt{t} , we show that the non-Gaussian decay exp [- Q {/t 3}/ t] of the distribution of Q t is generic.

  9. Hormone profile in juvenile systemic lupus erythematosus with previous or current amenorrhea

    NARCIS (Netherlands)

    Silva, Clovis A.; Deen, Maria E. J.; Febronio, Marilia V.; Oliveira, Sheila K.; Terreri, Maria T.; Sacchetti, Silvana B.; Sztajnbok, Flavio R.; Marini, Roberto; Quintero, Maria V.; Bica, Blanca E.; Pereira, Rosa M.; Bonfa, Eloisa; Ferriani, Virginia P.; Robazzi, Teresa C.; Magalhaes, Claudia S.; Hilario, Maria O.

    2011-01-01

    To identify the underlying mechanism of amenorrhea in juvenile systemic lupus erythematosus (JSLE) patients, thirty-five (11.7%) JSLE patients with current or previous amenorrhea were consecutively selected among the 298 post-menarche patients followed in 12 Brazilian pediatric rheumatology centers.

  10. Preliminary results concerning the simulation of beam profiles from extracted ion current distributions for mini-STRIKE

    Energy Technology Data Exchange (ETDEWEB)

    Agostinetti, P., E-mail: piero.agostinetti@igi.cnr.it; Serianni, G.; Veltri, P. [Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4, 35127 Padova (Italy); Giacomin, M. [Physics Department, Università di Padova, via F. Marzolo 8, 35131 Padova (Italy); Bonomo, F.; Schiesko, L. [Max-Planck-Institut für Plasmaphysik, Boltzmannstrasse 2, D-85748 Garching (Germany)

    2016-02-15

    The Radio Frequency (RF) negative hydrogen ion source prototype has been chosen for the ITER neutral beam injectors due to its optimal performances and easier maintenance demonstrated at Max-Planck-Institut für Plasmaphysik, Garching in hydrogen and deuterium. One of the key information to better understand the operating behavior of the RF ion sources is the extracted negative ion current density distribution. This distribution—influenced by several factors like source geometry, particle drifts inside the source, cesium distribution, and layout of cesium ovens—is not straightforward to be evaluated. The main outcome of the present contribution is the development of a minimization method to estimate the extracted current distribution using the footprint of the beam recorded with mini-STRIKE (Short-Time Retractable Instrumented Kalorimeter). To accomplish this, a series of four computational models have been set up, where the output of a model is the input of the following one. These models compute the optics of the ion beam, evaluate the distribution of the heat deposited on the mini-STRIKE diagnostic calorimeter, and finally give an estimate of the temperature distribution on the back of mini-STRIKE. Several iterations with different extracted current profiles are necessary to give an estimate of the profile most compatible with the experimental data. A first test of the application of the method to the BAvarian Test Machine for Negative ions beam is given.

  11. Comparison of Measurement And Modeling Of Current Profile Changes Due To Neutral Bean Ion Redistribution During TAE Avalanches in NSTX

    Energy Technology Data Exchange (ETDEWEB)

    Darrow, Douglas

    2013-07-09

    Brief "avalanches" of toroidal Alfven eigenmodes (TAEs) are observed in NSTX plasmas with several different n numbers simultaneously present. These affect the neutral beam ion distribution as evidenced by a concurrent drop in the neutron rate and, sometimes, beam ion loss. Guiding center orbit modeling has shown that the modes can transiently render portions of the beam ion phase space stochastic. The resulting redistribution of beam ions can also create a broader beam-driven current profile and produce other changes in the beam ion distribution function

  12. Hormone profile in juvenile systemic lupus erythematosus with previous or current amenorrhea.

    Science.gov (United States)

    Silva, Clovis A; Deen, Maria E J; Febrônio, Marilia V; Oliveira, Sheila K; Terreri, Maria T; Sacchetti, Silvana B; Sztajnbok, Flavio R; Marini, Roberto; Quintero, Maria V; Bica, Blanca E; Pereira, Rosa M; Bonfá, Eloisa; Ferriani, Virginia P; Robazzi, Teresa C; Magalhães, Claudia S; Hilário, Maria O

    2011-08-01

    To identify the underlying mechanism of amenorrhea in juvenile systemic lupus erythematosus (JSLE) patients, thirty-five (11.7%) JSLE patients with current or previous amenorrhea were consecutively selected among the 298 post-menarche patients followed in 12 Brazilian pediatric rheumatology centers. Pituitary gonadotrophins [follicle-stimulating hormone (FSH) and luteinizing hormone (LH)] and estradiol were evaluated in 32/35 patients, and prolactin and total testosterone in 29/35 patients. Patient's medical records were carefully reviewed according to demographic, clinical and therapeutic findings. The mean duration of amenorrhea was 7.2 ± 3.6 months. Low FSH or LH was observed in 7/32 (22%) JSLE patients and normal FSH or LH in 25 (78%). Remarkably, low levels of FSH or LH were associated with higher frequency of current amenorrhea (57% vs. 0%, P = 0.001), higher median disease activity (SLEDAI) and damage (SLICC/ACR-DI) (18 vs. 4, P = 0.011; 2 vs. 0, P = 0.037, respectively) and higher median current dose of prednisone (60 vs. 10 mg/day, P = 0.0001) compared to normal FSH or LH JSLE patients. None of them had decreased ovarian reserve and premature ovarian failure. Six of 29 (21%) patients had high levels of prolactin, and none had current amenorrhea. No correlations were observed between levels of prolactin and SLEDAI, and levels of prolactin and SLICC/ACR-DI scores (Spearman's coefficient). We have identified that amenorrhea in JSLE is associated with high dose of corticosteroids indicated for active disease due to hypothalamic-pituitary-ovary axis suppression.

  13. Profile of currently employed European Food Scientists and Technologists: Education, experience and skills

    Directory of Open Access Journals (Sweden)

    Katherine Flynn

    2013-10-01

    Full Text Available The food & drink (F&D sector in Europe ranks low in innovation and the European F&D industry has been losing importance in the global market. The food professionals, i.e., food scientists and technologists (FSTs, may not be meeting the varied demands of the sector. Here, we identify education, experience and skills of current FSTs and compare  geographic regions and employment areas. Between 2009 and 2012, 287 questionnaires representing over 4000 FSTs were collected from employers in 16 countries. Analyses showed that more than 80% of FSTs have a university degree; but only in Industry in the Central European region are most degrees in food science/technology. More than half of FSTs, and almost 60% in the South, have less than 10 years’ experience. The most common FST job title is Quality Manager, but with several variations based on region and employment area. Among skills, the most common is Communicating; found in over 90% of FSTs in all regions and employment areas. Food Safety is the most common of the food sector-specific skills, present in more than 75% of FSTs, yet there are differences in food sector skills based on employment area. Overall, these data suggest similarities among currently employed food professionals throughout Europe; they are young and highly educated, but also differences, especially in their food sector-specific skills. An understanding of the current FST should contribute to the improvement of FST training and thus benefit the European food sector.

  14. Optimal control of a class of nonlinear parabolic PDE systems arising in fusion plasma current profile dynamics

    Science.gov (United States)

    Ou, Yongsheng

    The need for new sources of energy is expected to become a critical problem within the next few decades. Nuclear fusion arises as a potential source of energy with sufficient energy density to supply the world population with its steadily increasing energy demands. The need to optimize the tokamak concept for the design of an economical, possibly steady state, fusion power plant have motivated extensive international research aimed at finding the so-called "advanced tokamak (AT) operation scenarios." It has been demonstrated that simultaneous real-time control of the current and pressure profiles could lead to the steady state sustainment of an internal transport barrier (ITB), and so to a stationary optimized plasma regime. It has also been suggested that global current profile control, eventually combined with pressure profile control, can be an effective mechanism for neoclassical tearing mode (NTM) control and avoidance. The control of linear or quasi-linear parabolic diffusion-reaction partial differential equations (PDE) has been extensively studied using interior control (see [1] and references therein) or boundary control (see [2] and references therein). Recently, the control of bilinear parabolic partial differential equations via actuation of the diffusive coefficient term, named diffusivity control here, has caught increasing interest. The diffusive coefficient term in a parabolic PDE is not necessary fixed or uncontrollable. For example, the diffusivity control problem arises in the control of the current density profile in magnetically confined fusion plasmas [3], where physical actuators such as plasma total current, line-averaged density and non-inductive total power are used to steer the plasma current density to a desired profile in a designated time period. By modulating these physical actuators it is possible not only to vary the amount of non-inductive current driven into the system (interior control) and the total plasma current (boundary

  15. Feature Profile Evolution During Etching of SiO2 in Radio-Frequency or Direct-Current Plasmas

    Science.gov (United States)

    Zhao, Zhanqiang; Dai, Zhongling; Wang, Younian

    2012-01-01

    We have developed a plasma etching simulator to investigate the evolution of pattern profiles in SiO2 material under different plasma conditions. This model focuses on energy and angular dependent etching yield (physical sputtering in this paper), neutral and ion angular distributions, and reflection of ions or neutrals on the surface of a photoresist or SiO2. The effect of positive charge accumulation on the surface of insulated mask or SiO2 is studied and the charge accumulation contributes to a deflection of ion trajectory. The wafer profile evolution has been simulated using a cellular-automata-like method under radio-frequency (RF) bias and direct-current (DC) bias, respectively. On the basis of the critical role of angular distribution of ions or neutrals, the wafer profile evolution has been simulated for different variances of angles. Observed microtrenching has been well reproduced in the simulator. The ratio of neutrals to ions has been considered and the result shows that because the neutrals are not accelerated by an electric field, their energy is much lower compared with ions, so they are easily reflected on the surface of SiO2, which makes the trench shallower.

  16. Generation and characterization of electron bunches with ramped current profile at the FLASH facility

    Energy Technology Data Exchange (ETDEWEB)

    Piot, P.; /Northern Illinois U. /Fermilab; Behrens, C.; Gerth, C.; /DESY; Lemery, F.; /Northern Illinois U.; Mihalcea, D.; /Fermilab; Vogt, M.; /DESY

    2011-09-01

    We report on the successful generation of electron bunches with current prof les that have a quasi-linear dependency on the longitudinal coordinate. The technique relies on impressing nonlinear correlations in the longitudinal phase space using a linac operating at two frequencies (1.3 and 3.9 GHz) and a bunch compressor. Data taken for various accelerator settings demonstrate the versatility of the method. The produced bunches have parameters well matched to drive high-gradient accelerating field with enhanced transformer ratio in beam-driven accelerators based on sub-mm-sizes dielectric or plasma structures.

  17. Density and current profiles in Uq (A2(1)) zero range process

    Science.gov (United States)

    Kuniba, A.; Mangazeev, V. V.

    2017-09-01

    The stochastic R matrix for Uq (An(1)) introduced recently gives rise to an integrable zero range process of n classes of particles in one dimension. For n = 2 we investigate how finitely many first class particles fixed as defects influence the grand canonical ensemble of the second class particles. By using the matrix product stationary probabilities involving infinite products of q-bosons, exact formulas are derived for the local density and current of the second class particles in the large volume limit.

  18. Currently Married Women with an Unmet Need for Contraception in Eritrea: Profile and Determinants

    Directory of Open Access Journals (Sweden)

    Roderic Beaujot

    2011-01-01

    Full Text Available Eritrea’s contraceptive prevalence rate is one of the lowest in sub-Saharan Africa and its fertility has only started to decline. Using data from the 2002 Eritrea Demographic and Health Survey (EDHS, this study examines the determinants of unmet need for family planning that is the discrepancy between fertility goals and actual contraceptive use. More than one-quarter of currently married women are estimated to have an unmet need and this has remained unchanged since 1995. The most important reason for unmet need is lack of knowledge of methods or of a source of supply. Currently married women with higher parity, and low autonomy, low or medium household economic status, and who know no method of contraception or source of supply are identified as the most likely to have an unmet need. Addressing the unmet need for family planning entails not merely greater knowledge of or access to contraceptive services, but also the enhancement of the status of women.

  19. Metacognition fundaments, applications, and trends a profile of the current state-of-the-art

    CERN Document Server

    2015-01-01

    This book is devoted to the Metacognition arena. It highlights works that show relevant analysis, reviews, theoretical, and methodological proposals, as well as studies, approaches, applications, and tools that shape current state, define trends and inspire future research. As a result of the revision process fourteen manuscripts were accepted and organized into five parts as follows: ·     Conceptual: contains conceptual works oriented to: (1) review models of strategy instruction and tailor a hybrid strategy; (2) unveil second-order judgments and define a method to assess metacognitive judgments; (3) introduces a conceptual model to describe the metacognitive activity as an autopoietic system. ·     Framework: offers three works concerned with: (4) stimulate metacognitive skills and self-regulatory functions; (5) evaluate metacognitive skills and self-regulated learning at problem solving; (6) deal with executive management metacognition and strategic knowledge metacognition. ·     Studies: r...

  20. One-dimensional transport of interacting particles: currents, density profiles, phase diagrams, and symmetries.

    Science.gov (United States)

    Dierl, Marcel; Einax, Mario; Maass, Philipp

    2013-06-01

    Driven lattice gases serve as canonical models for investigating collective transport phenomena and properties of nonequilibrium steady states. Here we study one-dimensional transport with nearest-neighbor interactions both in closed bulk systems and in open channels coupled to two particle reservoirs at the ends of the channel. For the widely employed Glauber rates we derive an exact current-density relation in the bulk for unidirectional hopping. An approach based on time-dependent density functional theory provides a good description of the kinetics. For open systems, the system-reservoir couplings are shown to have a striking influence on boundary-induced phase diagrams. The role of particle-hole symmetry is discussed, and its consequence for the topology of the phase diagrams. It is furthermore demonstrated that systems with weak bias can be mapped onto systems with unidirectional hopping.

  1. Tidal and low-frequency currents along the CK Line (31 deg 45 min N) over the East China Sea shelf

    Science.gov (United States)

    Yoshikawa, Yutaka; Matsuno, Takeshi; Wagawa, Taku; Hasegawa, Toru; Nishiuchi, Kou; Okamura, Kazumaro; Yoshimura, Hiroshi; Morii, Yasuhiro

    2012-12-01

    The bottom-mounted and ship-mounted ADCP velocities were analyzed to quantify tidal and low-frequency currents between 124.0 deg E and 128.5 deg E over the CK line (31 deg 45 min N) in the East China Sea shelf. The bottom-mounted ADCP, deployed in summer and autumn at station 1 (127 deg 25 min E) or station 2 (125 deg 30 min E), reveals relatively large (≃0.2ms-1) mean currents to the north or northwest at station 1 and a small (≤0.03ms-1) eastward current at station 2, as well as large tidal currents whose major axis amplitude amounts to 0.25ms-1 at station 1 and 0.5ms-1 at station 2. The bottom-mounted ADCP velocities were used to correct the tidal harmonic coefficients of the NAO.99Jb model under the assumption of uniform correction coefficients. The corrected coefficients were then used to remove the tidal currents in the ship-mounted ADCP velocity obtained over the whole CK-line. The detided ship-mounted ADCP velocities, which agree well with the bottom-mounted ADCP velocities at stations 1 and 2, show a more detailed spatial structure of the low-frequency current and its seasonal variations. The overall structure is characterized by a large northward/northwestward current in the eastern part and a small eastward current in the western part. The northward/northwestward current is largest (0.24ms-1) and most baroclinic in summer, while it becomes weakest (0.11ms-1) and most barotropic in winter. The zonal position of the boundary between the northward/northwestward current and the eastward current changes seasonally.

  2. Ocean Current Velocity Moored Time-Series Records collected from moored Acoustic Doppler Current Profilers near Grammanik Bank Spawning Aggregation Site (SPAG) and Frenchcap Cay, United States Virgin Islands, from April 24, 2011 to September 25, 2011 (NODC Accession 0088064)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Nortek 600kHz Aquadopp acoustic current profilers were deployed between April 2011 and September 2011 on shallow water moorings located on the coastal shelf south of...

  3. Profile of bevacizumab in the treatment of platinum-resistant ovarian cancer: current perspectives

    Directory of Open Access Journals (Sweden)

    McClung EC

    2016-03-01

    Full Text Available E Clair McClung, Robert M WenhamDepartment of Gynecologic Oncology, H. Lee Moffitt Cancer Center, Tampa, FL, USAAbstract: Patients with platinum-resistant ovarian cancer have progression of disease within 6 months of completing platinum-based chemotherapy. While several chemotherapeutic options exist for the treatment of platinum-resistant ovarian cancer, the overall response to any of these therapies is ~10%, with a median progression-free survival of 3–4 months and a median overall survival of 9–12 months. Bevacizumab (Avastin, a humanized, monoclonal antivascular endothelial growth factor antibody, has demonstrated antitumor activity in the platinum-resistant setting and was recently approved by US Food and Drug Administration for combination therapy with weekly paclitaxel, pegylated liposomal doxorubicin, or topotecan. This review summarizes key clinical trials investigating bevacizumab for recurrent, platinum-resistant ovarian cancer and provides an overview of efficacy, safety, and quality of life data relevant in this setting. While bevacizumab is currently the most studied and clinically available antiangiogenic therapy, we summarize recent studies highlighting novel alternatives, including vascular endothelial growth factor-trap, tyrosine kinase inhibitors, and angiopoietin inhibitor trebananib, and discuss their application for the treatment of platinum-resistant ovarian cancer.Keywords: bevacizumab, angiogenesis, ovarian cancer, platinum-resistant ovarian cancer, recurrent ovarian cancer

  4. Internal electric field profile in thin film hydrogenated amorphous silicon diodes studied by the transient-null-current method

    Energy Technology Data Exchange (ETDEWEB)

    Han, D.; Yeh, C.; Wang, K.; Wang, Q.

    1997-07-01

    The authors demonstrate that the internal field of a thin a-Si:H pin solar cells can be measured using the transient-null-current method. This method was previously developed to measure the internal field profile in a-Si alloy Schottky barrier. The internal electric field profile was determined by measuring the forward-bias voltages that tune the transient photocurrents generated by a pulsed laser at various wavelengths to zero. They adopt the same technique to a-Si:H p-i-n solar cells. In the case of p-i-n structure, they need to consider both space charge contributed by photogenerated carriers and carrier recombination which disturb the internal field. They use two critical conditions to minimize these effects. (1) To limit the contribution of photocarriers to space-charge distribution, the total charge collected is less than 10{sup {minus}10} C per pulse, and a repetition rate 1 Hz is used to ensure that the diode remains close to its equilibrium state, (2) The measuring time window is about 1--6 {micro}s following the displacement current. Typically the RC constant of diode is <1 {micro}s and the rise time of the forward-bias recombination current is 6.0 x {micro}s. They apply the signal average to process the forward-bias voltage. The error is within {+-}0.05 V. With this technique they can study the effect of variety of structure design or processing on the device performance.

  5. Velocity Data collected from moored Hull-Mounted Acoustic Doppler Current Profilers positioned in Vieques Sound and Virgin Passage in the US Caribbean

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Velocity data were collected from Hull-Mounted Acoustic Doppler Current Profilers moored across Virgin Passage between Culebra, Puerto Rico and St. Thomas, USVI, and...

  6. Current, temperature profile, and other data collected in TOGA Area - Pacific Ocean from drifting buoy from 01 March 1994 to 31 March 1994 (NODC Accession 9400055)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current, temperature profile, and other data were collected using drifting buoy in the TOGA Area - Pacific Ocean. Data were collected from 01 March 1994 to 31 March...

  7. [Current antibiotic resistance profile of uropathogenic Escherichia coli strains and therapeutic consequences].

    Science.gov (United States)

    El Bouamri, M C; Arsalane, L; Kamouni, Y; Yahyaoui, H; Bennouar, N; Berraha, M; Zouhair, S

    2014-12-01

    Urinary tract infections (UTI) are a very common reason for consultation and prescription in current practice. Excessive or inappropriate use of antibiotics in treating urinary tract infections is responsible for the emergence and spread of multiresistant uropathogenic bacteria. To evaluate the isolation frequency and antibiotic resistance of uropathogenic Escherichia coli strains isolated at the Marrakech region. We conducted a retrospective study over a period of three years (from 1st January 2010 to 31 December 2012). It included all non-redundant uropathogenic E. coli strains isolated in the microbiology laboratory of the Avicenne hospital of Marrakech, Morocco. During this study, 1472 uropathogenic enterobacteriaceae were isolated including 924 non-repetitive E. coli strains, an overall isolation frequency of 63%. Antibiotic resistance of isolated E. coli strains showed resistance rates to amoxicillin (65%), sulfamethoxazole-triméthropime (55%), amoxicillin-clavulanic acid (43%), ciprofloxacin (22%), gentamicin (14%), nitrofurans (11%), amikacin (8%) and fosfomycin (7%). The number of E. coli strains resistant to C3G by ESBL production was 67, an average frequency of 4.5% of all isolated uropathogenic enterobacteria. The associated antibiotic resistance in the case of ESBL-producing E. coli were 82% for ciprofloxacin, 76% for sulfamethozole trimethoprim, 66% for gentamicin and 56% for amikacin. No resistance to imipenem was recorded for the isolated E. coli strains, which represents an imipenem sensitivity of 100%. Antibiotic resistance of uropathogenic E. coli strains limits treatment options and therefore constitutes a real public health problem. The regular updating of antibiotic susceptibility statistics of E. coli strains allows a better adaptation of the probabilistic antibiotic therapy to local epidemiological data. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  8. Numerical calculation of neoclassical distribution functions and current profiles in low collisionality, axisymmetric plasmas

    Science.gov (United States)

    Lyons, B. C.; Jardin, S. C.; Ramos, J. J.

    2012-08-01

    A new code, the Neoclassical Ion-Electron Solver (NIES), has been written to solve for stationary, axisymmetric distribution functions (f) in the conventional banana regime for both ions and electrons using a set of drift-kinetic equations (DKEs) with linearized Fokker-Planck-Landau collision operators. Solvability conditions on the DKEs determine the relevant non-adiabatic pieces of f (called h). We work in a 4D phase space in which ψ defines a flux surface, θ is the poloidal angle, v is the magnitude of the velocity referenced to the mean flow velocity, and λ is the dimensionless magnetic moment parameter. We expand h in finite elements in both v and λ. The Rosenbluth potentials, Φ and Ψ, which define the integral part of the collision operator, are expanded in Legendre series in cosχ, where χ is the pitch angle, Fourier series in cosθ, and finite elements in v. At each ψ, we solve a block tridiagonal system for hi (independent of fe), then solve another block tridiagonal system for he (dependent on fi). We demonstrate that such a formulation can be accurately and efficiently solved. NIES is coupled to the MHD equilibrium code JSOLVER [J. DeLucia et al., J. Comput. Phys. 37, 183-204 (1980)] allowing us to work with realistic magnetic geometries. The bootstrap current is calculated as a simple moment of the distribution function. Results are benchmarked against the Sauter analytic formulas and can be used as a kinetic closure for an MHD code (e.g., M3D -C1 [S. C. Jardin et al., Comput. Sci. Discovery 5, 014002 (2012)]).

  9. Numerical calculation of neoclassical distribution functions and current profiles in low collisionality, axisymmetric plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Lyons, B. C. [Program in Plasma Physics, Princeton University, Princeton, New Jersey 08543-0451 (United States); Jardin, S. C. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543-0451 (United States); Ramos, J. J. [Plasma Science and Fusion Center, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139-4307 (United States)

    2012-08-15

    A new code, the Neoclassical Ion-Electron Solver (NIES), has been written to solve for stationary, axisymmetric distribution functions (f) in the conventional banana regime for both ions and electrons using a set of drift-kinetic equations (DKEs) with linearized Fokker-Planck-Landau collision operators. Solvability conditions on the DKEs determine the relevant non-adiabatic pieces of f (called h). We work in a 4D phase space in which {psi} defines a flux surface, {theta} is the poloidal angle, v is the magnitude of the velocity referenced to the mean flow velocity, and {lambda} is the dimensionless magnetic moment parameter. We expand h in finite elements in both v and {lambda}. The Rosenbluth potentials, {Phi} and {Psi}, which define the integral part of the collision operator, are expanded in Legendre series in cos{chi}, where {chi} is the pitch angle, Fourier series in cos{theta}, and finite elements in v. At each {psi}, we solve a block tridiagonal system for h{sub i} (independent of f{sub e}), then solve another block tridiagonal system for h{sub e} (dependent on f{sub i}). We demonstrate that such a formulation can be accurately and efficiently solved. NIES is coupled to the MHD equilibrium code JSOLVER [J. DeLucia et al., J. Comput. Phys. 37, 183-204 (1980)] allowing us to work with realistic magnetic geometries. The bootstrap current is calculated as a simple moment of the distribution function. Results are benchmarked against the Sauter analytic formulas and can be used as a kinetic closure for an MHD code (e.g., M3D-C{sup 1}[S. C. Jardin et al., Comput. Sci. Discovery 5, 014002 (2012)]).

  10. Numerical Calculation of Neoclassical Distribution Functions and Current Profiles in Low Collisionality, Axisymmetric Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    B.C. Lyons, S.C. Jardin, and J.J. Ramos

    2012-06-28

    A new code, the Neoclassical Ion-Electron Solver (NIES), has been written to solve for stationary, axisymmetric distribution functions (f ) in the conventional banana regime for both ions and elec trons using a set of drift-kinetic equations (DKEs) with linearized Fokker-Planck-Landau collision operators. Solvability conditions on the DKEs determine the relevant non-adiabatic pieces of f (called h ). We work in a 4D phase space in which Ψ defines a flux surface, θ is the poloidal angle, v is the total velocity referenced to the mean flow velocity, and λ is the dimensionless magnetic moment parameter. We expand h in finite elements in both v and λ . The Rosenbluth potentials, φ and ψ, which define the integral part of the collision operator, are expanded in Legendre series in cos χ , where χ is the pitch angle, Fourier series in cos θ , and finite elements in v . At each ψ , we solve a block tridiagonal system for hi (independent of fe ), then solve another block tridiagonal system for he (dependent on fi ). We demonstrate that such a formulation can be accurately and efficiently solved. NIES is coupled to the MHD equilibrium code JSOLVER [J. DeLucia, et al., J. Comput. Phys. 37 , pp 183-204 (1980).] allowing us to work with realistic magnetic geometries. The bootstrap current is calculated as a simple moment of the distribution function. Results are benchmarked against the Sauter analytic formulas and can be used as a kinetic closure for an MHD code (e.g., M3D-C1 [S.C. Jardin, et al ., Computational Science & Discovery, 4 (2012).]).

  11. EXTRACTION OF INTERNAL TIDE FROM CURRENT

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In order to extract the internal tidal current from the current data which is not measured from the sea surface to the bottom, a data processing method is developed. It is based on the fact that the internal wave currents above and below the sharp thermocline are inverse in direction. This method is a practical extension to that proposed by Shu (1985) that can be only used to quite ideal current data. The ADCP data collected on the South China Sea is then processed by this method. The internal tidal current is successfully extracted.

  12. Identification and real time control of current profile in Tore-supra: algorithms and simulation; Identification et controle en temps reel du profil de courant dans Tore Supra: algorithmes et simulations

    Energy Technology Data Exchange (ETDEWEB)

    Houy, P

    1999-10-15

    The aim of this work is to propose a real-time control of the current profile in order to achieve reproducible operating modes with improved energetic confinement in tokamaks. The determination of the profile is based on measurements given by interferometry and polarimetry diagnostics. Different ways to evaluate and improve the accuracy of these measurements are exposed. The position and the shape of a plasma are controlled by the poloidal system that forces them to cope with standard values. Gas or neutral ions or ice pellet or extra power injection are technical means used to control other plasma parameters. These controls are performed by servo-controlled loops. The poloidal system of Tore-supra is presented. The main obstacle to a reliable determination of the current profile is the fact that slightly different Faraday angles lead to very different profiles. The direct identification method that is exposed in this work, gives the profile that minimizes the square of the margin between measured and computed values. The different algorithms proposed to control current profiles on Tore-supra have been validated by using a plasma simulation. The code Cronos that solves the resistive diffusion equation of current has been used. (A.C.)

  13. Performance Assessment of Model-Based Optimal Feedforward and Feedback Current Profile Control in NSTX-U using the TRANSP Code

    Science.gov (United States)

    Ilhan, Z.; Wehner, W. P.; Schuster, E.; Boyer, M. D.; Gates, D. A.; Gerhardt, S.; Menard, J.

    2015-11-01

    Active control of the toroidal current density profile is crucial to achieve and maintain high-performance, MHD-stable plasma operation in NSTX-U. A first-principles-driven, control-oriented model describing the temporal evolution of the current profile has been proposed earlier by combining the magnetic diffusion equation with empirical correlations obtained at NSTX-U for the electron density, electron temperature, and non-inductive current drives. A feedforward + feedback control scheme for the requlation of the current profile is constructed by embedding the proposed nonlinear, physics-based model into the control design process. Firstly, nonlinear optimization techniques are used to design feedforward actuator trajectories that steer the plasma to a desired operating state with the objective of supporting the traditional trial-and-error experimental process of advanced scenario planning. Secondly, a feedback control algorithm to track a desired current profile evolution is developed with the goal of adding robustness to the overall control scheme. The effectiveness of the combined feedforward + feedback control algorithm for current profile regulation is tested in predictive simulations carried out in TRANSP. Supported by PPPL.

  14. A comparative study of sheath potential profile measurements with laser-heated and current-heated emissive probes

    Science.gov (United States)

    Kella, Vara Prasad; Mehta, Payal; Sarma, A.; Ghosh, J.; Chattopadhyay, P. K.

    2016-04-01

    Emissive Langmuir probe is one of the most efficient diagnostic tools available for plasma potential measurements. Extensive studies have been carried out in designing different kinds of conventional (electrically heated) emissive probes (CEPs) to estimate the plasma potential. Laser heated emissive probe (LHEP) has been developed with certain advantages over the conventional probes such as low evaporation rate of the probe material, high lifetime, and high emission levels. Most importantly, the LHEP uses laser to heat the probe-tip and does not require electric current to heat the probe-tip like in CEP. The heating current in CEP substantially affects the plasma potential measurements, especially in the regions of plasma where high electric and magnetic field gradients are present. In this paper, we studied the plasma potential structures in sheath-presheath region using both LHEP and CEP in an unmagnetized dc-filament discharge plasma. Measurements of sheath spatial potential profile using laser heated emissive probe are compared with those obtained using conventional emissive probe.

  15. Quantification of mid and late evoked sinks in laminar current source density profiles of columns in the primary auditory cortex.

    Science.gov (United States)

    Schaefer, Markus K; Hechavarría, Julio C; Kössl, Manfred

    2015-01-01

    Current source density (CSD) analysis assesses spatiotemporal synaptic activations at somatic and/or dendritic levels in the form of depolarizing current sinks. Whereas many studies have focused on the short (primary auditory cortex of Mongolian gerbils. By applying an algorithm for contour calculation, three distinct mid and four late evoked sinks were identified in layers I, III, Va, VIa, and VIb. Our results further showed that the patterns of intracortical information-flow remained qualitatively similar for low and for high sound pressure level stimuli at the characteristic frequency (CF) as well as for stimuli ± 1 octave from CF. There were, however, differences associated with the strength, vertical extent, onset latency, and duration of the sinks for the four stimulation paradigms used. Stimuli one octave above the most sensitive frequency evoked a new, and quite reliable, sink in layer Va whereas low level stimulation led to the disappearance of the layer VIb sink. These data indicate the presence of input sources specifically activated in response to level and/or frequency parameters. Furthermore, spectral integration above vs. below the CF of neurons is asymmetric as illustrated by CSD profiles. These results are important because synaptic feedback associated with mid and late sinks-beginning at 50 ms post stimulus latency-is likely crucial for response modulation resulting from higher order processes like memory, learning or cognitive control.

  16. Histopathological, Molecular, and Genetic Profile of Hereditary Diffuse Gastric Cancer: Current Knowledge and Challenges for the Future.

    Science.gov (United States)

    van der Post, Rachel S; Gullo, Irene; Oliveira, Carla; Tang, Laura H; Grabsch, Heike I; O'Donovan, Maria; Fitzgerald, Rebecca C; van Krieken, Han; Carneiro, Fátima

    2016-01-01

    Familial clustering is seen in 10 % of gastric cancer cases and approximately 1-3 % of gastric cancer arises in the setting of hereditary diffuse gastric cancer (HDGC). In families with HDGC, gastric cancer presents at young age. HDGC is predominantly caused by germline mutations in CDH1 and in a minority by mutations in other genes, including CTNNA1. Early stage HDGC is characterized by a few, up to dozens of intramucosal foci of signet ring cell carcinoma and its precursor lesions. These include in situ signet ring cell carcinoma and pagetoid spread of signet ring cells. Advanced HDGC presents as poorly cohesive/diffuse type carcinoma, normally with very few typical signet ring cells, and has a poor prognosis. Currently, it is unknown which factors drive the progression towards aggressive disease, but it is clear that most intramucosal lesions will not have such progression.Immunohistochemical profile of early and advanced HDGC is often characterized by abnormal E-cadherin immunoexpression, including absent or reduced membranous expression, as well as "dotted" or cytoplasmic expression. However, membranous expression of E-cadherin does not exclude HDGC. Intramucosal HDGC (pT1a) presents with an "indolent" phenotype, characterized by typical signet ring cells without immunoexpression of Ki-67 and p53, while advanced carcinomas (pT > 1) display an "aggressive" phenotype with pleomorphic cells, that are immunoreactive for Ki-67 and p53. These features show that the IHC profile is different between intramucosal and more advanced HDGC, providing evidence of phenotypic heterogeneity, and may help to define predictive biomarkers of progression from indolent to aggressive, widely invasive carcinomas.

  17. Toroidal current profile control during low confinement mode plasma discharges in DIII-D via first-principles-driven model-based robust control synthesis

    Science.gov (United States)

    Barton, Justin E.; Boyer, Mark D.; Shi, Wenyu; Schuster, Eugenio; Luce, Tim C.; Ferron, John R.; Walker, Michael L.; Humphreys, David A.; Penaflor, Ben G.; Johnson, Robert D.

    2012-12-01

    In order for ITER to be capable of operating in advanced tokamak operating regimes, characterized by a high fusion gain, good plasma confinement, magnetohydrodynamic stability and a non-inductively driven plasma current, for extended periods of time, several challenging plasma control problems still need to be solved. Setting up a suitable toroidal current density profile in the tokamak is key for one possible advanced operating scenario characterized by non-inductive sustainment of the plasma current. At the DIII-D tokamak, the goal is to create the desired current profile during the ramp-up and early flat-top phases of the plasma discharge and then actively maintain this target profile for the remainder of the discharge. The evolution in time of the toroidal current profile in tokamaks is related to the evolution of the poloidal magnetic flux profile, which is modelled in normalized cylindrical coordinates using a first-principles, nonlinear, dynamic partial differential equation (PDE) referred to as the magnetic diffusion equation. The magnetic diffusion equation is combined with empirical correlations developed from physical observations and experimental data from DIII-D for the electron temperature, the plasma resistivity and the non-inductive current drive to develop a simplified, control-oriented, nonlinear, dynamic PDE model of the poloidal flux profile evolution valid for low confinement mode discharges. In this work, we synthesize a robust feedback controller to reject disturbances and track a desired reference trajectory of the poloidal magnetic flux gradient profile by employing the control-oriented model of the system. A singular value decomposition of the static gain matrix of the plant model is utilized to identify the most relevant control channels and is combined with the dynamic response of system around a given operating trajectory to design the feedback controller. A general framework for real-time feedforward + feedback control of magnetic and

  18. QRev—Software for computation and quality assurance of acoustic doppler current profiler moving-boat streamflow measurements—User’s manual for version 2.8

    Science.gov (United States)

    Mueller, David S.

    2016-05-12

    The software program, QRev computes the discharge from moving-boat acoustic Doppler current profiler measurements using data collected with any of the Teledyne RD Instrument or SonTek bottom tracking acoustic Doppler current profilers. The computation of discharge is independent of the manufacturer of the acoustic Doppler current profiler because QRev applies consistent algorithms independent of the data source. In addition, QRev automates filtering and quality checking of the collected data and provides feedback to the user of potential quality issues with the measurement. Various statistics and characteristics of the measurement, in addition to a simple uncertainty assessment are provided to the user to assist them in properly rating the measurement. QRev saves an extensible markup language file that can be imported into databases or electronic field notes software. The user interacts with QRev through a tablet-friendly graphical user interface. This report is the manual for version 2.8 of QRev.

  19. Real Time Hybrid Model Predictive Control for the Current Profile of the Tokamak à Configuration Variable (TCV

    Directory of Open Access Journals (Sweden)

    Izaskun Garrido

    2016-08-01

    Full Text Available Plasma stability is one of the obstacles in the path to the successful operation of fusion devices. Numerical control-oriented codes as it is the case of the widely accepted RZIp may be used within Tokamak simulations. The novelty of this article relies in the hierarchical development of a dynamic control loop. It is based on a current profile Model Predictive Control (MPC algorithm within a multiloop structure, where a MPC is developed at each step so as to improve the Proportional Integral Derivative (PID global scheme. The inner control loop is composed of a PID-based controller that acts over the Multiple Input Multiple Output (MIMO system resulting from the RZIp plasma model of the Tokamak à Configuration Variable (TCV. The coefficients of this PID controller are initially tuned using an eigenmode reduction over the passive structure model. The control action corresponding to the state of interest is then optimized in the outer MPC loop. For the sake of comparison, both the traditionally used PID global controller as well as the multiloop enhanced MPC are applied to the same TCV shot. The results show that the proposed control algorithm presents a superior performance over the conventional PID algorithm in terms of convergence. Furthermore, this enhanced MPC algorithm contributes to extend the discharge length and to overcome the limited power availability restrictions that hinder the performance of advanced tokamaks.

  20. Analysis of longer period variation of the Kuroshio Current intrusion into the Luzon Strait using rectified wavelet power spectra

    Science.gov (United States)

    Yuan, Yaochu; Yang, Chenghao; Tseng, Yu-heng; Zhu, Xiao-Hua; Wang, Huiqun; Chen, Hong

    2017-08-01

    Longer period variation of the Kuroshio into the Luzon Strait (LS) was identified using acoustic Doppler current profiler (ADCP) observations as well as pressure and temperature time series data recorded by two TDs (manufactured by the RBR Ltd.) at mooring station N2 (20°40.441‧N, 120°38.324‧E). The ADCP was deployed at depths of 50-300 m between July 7, 2009 and April 10, 2011, and the TDs at around 340 and 365 m between July 9, 2009 and July 9, 2011. Observations provide strong evidence of longer period variation of the Kuroshio into the LS using the Vector rotary spectra (VRS) and Rectified wavelet power spectra analysis (RWPSA). RWPSA of the observations allowed the identification of two types of dominant periods. The first type, with the strongest power spectral density (PSD), had a dominant period of 112 d and was found throughout the upper 300 m. For example, the maximum PSD for western and northern velocity components time series were 3800 and 3550 at 50 m, respectively. The maximum power spectral density decrease with deeper depths, i.e., the depth dependence of maximum PSD. The 112 d period was also identified in the pressure and temperature time series data, at 340 m and 365 m. Combined RWPSA with VRS and mechanism analysis, it is clear that the occurrence of the most dominant period of 112 d in the upper 300 m is related to the clockwise meandering of the Kuroshio into the LS, which is caused by westward propagating stronger anticyclonic eddies from the interior ocean due to the interaction of Rossby eddies with the Kuroshio. The second type of dominant period, for example a 40 d period, is related to the anticlockwise meandering of the Kuroshio. The final dominant period of 14 d coincides with the fortnightly spring-neap tidal period.

  1. Targeted Therapy Database (TTD: a model to match patient's molecular profile with current knowledge on cancer biology.

    Directory of Open Access Journals (Sweden)

    Simone Mocellin

    Full Text Available BACKGROUND: The efficacy of current anticancer treatments is far from satisfactory and many patients still die of their disease. A general agreement exists on the urgency of developing molecularly targeted therapies, although their implementation in the clinical setting is in its infancy. In fact, despite the wealth of preclinical studies addressing these issues, the difficulty of testing each targeted therapy hypothesis in the clinical arena represents an intrinsic obstacle. As a consequence, we are witnessing a paradoxical situation where most hypotheses about the molecular and cellular biology of cancer remain clinically untested and therefore do not translate into a therapeutic benefit for patients. OBJECTIVE: To present a computational method aimed to comprehensively exploit the scientific knowledge in order to foster the development of personalized cancer treatment by matching the patient's molecular profile with the available evidence on targeted therapy. METHODS: To this aim we focused on melanoma, an increasingly diagnosed malignancy for which the need for novel therapeutic approaches is paradigmatic since no effective treatment is available in the advanced setting. Relevant data were manually extracted from peer-reviewed full-text original articles describing any type of anti-melanoma targeted therapy tested in any type of experimental or clinical model. To this purpose, Medline, Embase, Cancerlit and the Cochrane databases were searched. RESULTS AND CONCLUSIONS: We created a manually annotated database (Targeted Therapy Database, TTD where the relevant data are gathered in a formal representation that can be computationally analyzed. Dedicated algorithms were set up for the identification of the prevalent therapeutic hypotheses based on the available evidence and for ranking treatments based on the molecular profile of individual patients. In this essay we describe the principles and computational algorithms of an original method

  2. Targeted Therapy Database (TTD): A Model to Match Patient's Molecular Profile with Current Knowledge on Cancer Biology

    Science.gov (United States)

    Mocellin, Simone; Shrager, Jeff; Scolyer, Richard; Pasquali, Sandro; Verdi, Daunia; Marincola, Francesco M.; Briarava, Marta; Gobbel, Randy; Rossi, Carlo; Nitti, Donato

    2010-01-01

    Background The efficacy of current anticancer treatments is far from satisfactory and many patients still die of their disease. A general agreement exists on the urgency of developing molecularly targeted therapies, although their implementation in the clinical setting is in its infancy. In fact, despite the wealth of preclinical studies addressing these issues, the difficulty of testing each targeted therapy hypothesis in the clinical arena represents an intrinsic obstacle. As a consequence, we are witnessing a paradoxical situation where most hypotheses about the molecular and cellular biology of cancer remain clinically untested and therefore do not translate into a therapeutic benefit for patients. Objective To present a computational method aimed to comprehensively exploit the scientific knowledge in order to foster the development of personalized cancer treatment by matching the patient's molecular profile with the available evidence on targeted therapy. Methods To this aim we focused on melanoma, an increasingly diagnosed malignancy for which the need for novel therapeutic approaches is paradigmatic since no effective treatment is available in the advanced setting. Relevant data were manually extracted from peer-reviewed full-text original articles describing any type of anti-melanoma targeted therapy tested in any type of experimental or clinical model. To this purpose, Medline, Embase, Cancerlit and the Cochrane databases were searched. Results and Conclusions We created a manually annotated database (Targeted Therapy Database, TTD) where the relevant data are gathered in a formal representation that can be computationally analyzed. Dedicated algorithms were set up for the identification of the prevalent therapeutic hypotheses based on the available evidence and for ranking treatments based on the molecular profile of individual patients. In this essay we describe the principles and computational algorithms of an original method developed to fully exploit

  3. Merging altimeter data with Argo profiles to improve observation of tropical Pacific thermocline circulation and ENSO

    Science.gov (United States)

    Zhang, D.; Lee, T.; Wang, F.; McPhaden, M. J.; Kessler, W. S.

    2016-12-01

    Meridional thermocline currents play an important role in the recharge and discharge of tropical Pacific warm water during the development and transition of ENSO cycles. Previous analyses have shown large variations of the equatorward meridional thermocline convergence/divergence on ENSO and decadal time scales in the interior ocean. The total convergence/divergence is however unknown due to the lack of long term observation in the western boundary currents. Numerical modelling studies suggested a tendency of compensation between the interior and western boundary currents, but the exact compensation is model dependent. While Argo floats provide reasonable data coverage in the interior ocean, few floats are in the western boundary currents. Recent multi-mission satellite altimeter data and advanced processing techniques have resulted in higher resolution sea surface height anomaly (SSHA) products with better accuracy closer to the coasts. This study utilizes the statistical relationship between Argo dynamic height profiles and altimeter SSHA to calculate geostrophic thermocline currents in both the interior ocean and the western boundary of the tropical Pacific. The derived thermocline currents in the western boundary are validated by a 3.5-year moored Acoustic Doppler Current Profiler (ADCP) measurement in the Mindanao Current and by a series of glider surveys (Davis et al. 2012) in the Solomon Sea. The meridional transport timeseries of the interior and western boundary currents in the thermocline show different lead-lag relationships to the Nino 3.4 index. Results will be discussed in the context of recent 2014-2015 El Nino development and the potential contribution to the Tropical Pacific Observing System (TPOS).

  4. Reply to comment on "A simple model for the short-time evolution of near-surface current and temperature profiles"

    CERN Document Server

    Jenkins, A D; Jenkins, Alastair D.; Ward, Brian

    2005-01-01

    This is our response to a comment by Walter Eifler on our paper `A simple model for the short-time evolution of near-surface current and temperature profiles' (arXiv:physics/0503186, accepted for publication in Deep-Sea Research II). Although Eifler raises genuine issues regarding our model's validity and applicability, we are nevertheless of the opinion that it is of value for the short-term evolution of the upper-ocean profiles of current and temperature. The fact that the effective eddy viscosity tends to infinity for infinite time under a steady wind stress may not be surprising. It can be interpreted as a vertical shift of the eddy viscosity profile and an increase in the size of the dominant turbulent eddies under the assumed conditions of small stratification and infinite water depth.

  5. Near-inertial currents off the east coast of India

    Science.gov (United States)

    Mukherjee, A.; Shankar, D.; G Aparna, S.; Amol, P.; Fernando, V.; Fernandes, R.; Khalap, S.; Narayan, S.; Agarvadekar, Y.; Gaonkar, M.; Tari, P.; Kankonkar, A.; Vernekar, S.

    2013-03-01

    We use data from moorings equipped with Acoustic Doppler Current Profilers (ADCPs) and deployed in the Bay of Bengal off the east coast of India from May 2009 to February 2012 to study the near-inertial currents (NICs) on the continental shelf and slope. The data show that the NICs are much weaker at the shelf break than on the slope. Inertial energy is weak all along the east coast during January-April. It is high during the summer monsoon (May-September) in the northern Bay of Bengal and early during the winter monsoon (October-December) in the southern bay; at locations in the central bay, the inertial energy does not show this seasonality. This difference between the northern and southern bay is due to the seasonality in the occurrence of storms, which tend to occur in the north (south) during the summer (winter) monsoon. Variability across years is evident in the three-year record, with the NICs being weaker during 2010-2011 compared to 2009. Upward phase propagation is evident in the data, indicating downward propagation of energy. During severe cyclones, the data suggest that the strong NICs extend below the thin surface mixed layer in the bay. A comparison of the NICs amplitude with that of the detided (residual) current shows that the NICs make a significant contribution to the observed current on the east-coast slope: the magnitude of the NICs exceeds that of the residual current on the slope in the northern and southern Bay of Bengal on over 10 days in a year.

  6. Study on the Log-Linear Velocity Profile of Near-Bed Tidal Current in Estuarine and Coastal Waters

    Institute of Scientific and Technical Information of China (English)

    SONG Zhi-yao; YAN Yi-xin; HAO Jia-ling; KONG Jun; ZHANG Hong-gui

    2006-01-01

    Many observed data show that the near-bed tidal velocity profile deviates from the usual logarithmic law. The amount of deviation may not be large, but it results in large errors when the logarithmic velocity profile is used to calculate the bed roughness height and friction velocity (or shear stress). Based on their investigation, Kuo et al. (1996) indicate that the deviation amplitude may exceed 100%. On the basis of fluid dynamic principle, the profile of the near-bed tidal velocity in estuarine and coastal waters is established by introducing Prandtl's mixing length theory and Von Karman self-similarity theory. By the fitting and calculation of the near-bed velocity profile data observed in the west Solent, England, the results are compared with those of the usual logarithmic model, and it is shown that the present near-bed tidal velocity profile model has such advantages as higher fitting precision, and better inner consistency between the roughness height and friction velocity. The calculated roughness height and friction velocity are closer to reality. The conclusions are validated that the logarithmic model underestimates the roughness height and friction velocity during tidal acceleration and overestimates them during tidal deceleration.

  7. Field testing of a convergent array of acoustic Doppler profilers for high-resolution velocimetry in energetic tidal currents

    Energy Technology Data Exchange (ETDEWEB)

    Harding, Samuel F.; Sellar, Brian; Richmond, Marshall C.

    2016-04-25

    An array of single-beam acoustic Doppler profilers has been developed for the high resolution measurement of three-dimensional tidal flow velocities and subsequently tested in an energetic tidal site. This configuration has been developed to increase spatial resolution of velocity measurements in comparison to conventional acoustic Doppler profilers (ADPs) which characteristically use divergent acoustic beams emanating from a single instrument. This is achieved using geometrically convergent acoustic beams creating a sample volume at the focal point of 0.03 m3. Away from the focal point, the array is also able to simultaneously reconstruct three-dimensional velocity components in a profile throughout the water column, and is referred to herein as a convergent-beam acoustic Doppler profiler (C-ADP). Mid-depth profiling is achieved through integration of the sensor platform with the operational commercial-scale Alstom 1MW DeepGen-IV Tidal Turbine deployed at the European Marine Energy Center, Orkney Isles, UK. This proof-of-concept paper outlines the C-ADP system configuration and comparison to measurements provided by co-installed reference instrumentation.

  8. Lateral critical current distribution and self-field profile of Bi-2223/Ag conductors: measurements and calculations

    NARCIS (Netherlands)

    Demencik, E.; Usak, P.; Polak, M.; Piel, H.; Dhalle, M.

    2006-01-01

    The lateral current distribution and the magnetic self-field induced by a transport current were measured independently in three multifilament Bi-2223/Ag tapes with qualitatively different filament layouts. The current and field data from these two experiments, magnetic knife and scanning Hall probe

  9. Lateral critical current distribution and self-field profile of Bi-2223/Ag conductors: measurements and calculations

    NARCIS (Netherlands)

    Demencik, E.; Usak, P.; Polak, M.; Piel, H.; Dhalle, Marc M.J.

    2006-01-01

    The lateral current distribution and the magnetic self-field induced by a transport current were measured independently in three multifilament Bi-2223/Ag tapes with qualitatively different filament layouts. The current and field data from these two experiments, magnetic knife and scanning Hall

  10. Initial measurements of plasma current and electron density profiles using a polarimeter/interferometer (POINT) for long pulse operation in EAST (invited)

    Science.gov (United States)

    Liu, H. Q.; Qian, J. P.; Jie, Y. X.; Ding, W. X.; Brower, D. L.; Zou, Z. Y.; Li, W. M.; Lian, H.; Wang, S. X.; Yang, Y.; Zeng, L.; Lan, T.; Yao, Y.; Hu, L. Q.; Zhang, X. D.; Wan, B. N.

    2016-11-01

    A double-pass, radially viewing, far-infrared laser-based POlarimeter-INTerferometer (POINT) system utilizing the three-wave technique has been implemented for diagnosing the plasma current and electron density profiles in the Experimental Advanced Superconducting Tokamak (EAST). POINT has been operated routinely during the most recent experimental campaign and provides continuous 11 chord line-integrated Faraday effect and density measurement throughout the entire plasma discharge for all heating schemes and all plasma conditions (including ITER relevant scenario development). Reliability of both the polarimetric and interferometric measurements is demonstrated in 25 s plasmas with H-mode and 102 s long-pulse discharges. Current density, safety factor (q), and electron density profiles are reconstructed using equilibrium fitting code (EFIT) with POINT constraints for the plasma core.

  11. A summary report on the search for current technologies and developers to develop depth profiling/physical parameter end effectors

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Q.H.

    1994-09-12

    This report documents the search strategies and results for available technologies and developers to develop tank waste depth profiling/physical parameter sensors. Sources searched include worldwide research reports, technical papers, journals, private industries, and work at Westinghouse Hanford Company (WHC) at Richland site. Tank waste physical parameters of interest are: abrasiveness, compressive strength, corrosiveness, density, pH, particle size/shape, porosity, radiation, settling velocity, shear strength, shear wave velocity, tensile strength, temperature, viscosity, and viscoelasticity. A list of related articles or sources for each physical parameters is provided.

  12. Calculation of pole profiles for the design of particle accelerators magnets. Equivalent current and conformal representation methods; Calcul de profils polaires destines a des aimants d'accelerateurs de particules. Methode des courants et methode des transformations conformes

    Energy Technology Data Exchange (ETDEWEB)

    Jaidane, S. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-04-01

    These two methods allow the determination of the shape of the poles in magnets, for a given field distribution in the air-gap. First method: The principle of the method consists to create the desired law of field by means of current sheets in which one can adjust the density given in a polynomial form. For the right distribution of these currents, the equipotential corresponding to the magnetic potential of the excitation coils is calculated. The pole profile of the H or C magnet identified with this equipotential line will finally take the place of the distribution of the current sheets used in the calculation. Steel permeability is assumed to be infinite and Foucault current effects are neglected in the case of variable fields. Second method: It consists to find a conformal representation that maps the pole profile plane upon the upper half of another plane where the equipotentials are two half straight lines, and where the field problems are easier to solve. Steel permeability is also considered to be infinite and the coils far from the pole faces. This known method has been applied to be compared with the first one. (author) [French] Ces deux methodes consistent a determiner la forme des pieces polaires d'aimants pour une distribution de champ determinee a l'avance dans l'entrefer. Premiere methode: Le principe de la methode consiste a creer la loi de champ desiree par l'intermediaire de nappes de courant dont on peut ajuster la densite exprimee sous une forme polynominale. Pour une distribution convenable de ces courants, on calcule l'equipotentielle correspondant au potentiel magnetique des bobines d'excitation. Le profil polaire d'un aimant en H ou C identifie a l'equipotentielle se substitue finalement a la repartition des nappes de courant utilisee dans la methode de calcul. La permeabilite de l'acier est supposee infinie et les courants de Foucault sont negliges dans le cas des champs variables. Seconde methode

  13. 77 FR 19242 - Takes of Marine Mammals Incidental to Specified Activities; Low-Energy Marine Geophysical Survey...

    Science.gov (United States)

    2012-03-30

    ... multibeam echosounder (MBES), a sub-bottom profiler (SBP), and an acoustic Doppler current profiler (ADCP... the use of the MBES, SBP, ADCP, or during marine coring operations for reasons discussed in this... approximately 1,100 to 5,000 m (0.68 to 3.1 mi). The proposed seismic survey will be conducted in the EEZ of...

  14. Monitoring tooth profile faults in epicyclic gearboxes using synchronously averaged motor currents: Mathematical modeling and experimental validation

    Science.gov (United States)

    Ottewill, J. R.; Ruszczyk, A.; Broda, D.

    2017-02-01

    Time-varying transmission paths and inaccessibility can increase the difficulty in both acquiring and processing vibration signals for the purpose of monitoring epicyclic gearboxes. Recent work has shown that the synchronous signal averaging approach may be applied to measured motor currents in order to diagnose tooth faults in parallel shaft gearboxes. In this paper we further develop the approach, so that it may also be applied to monitor tooth faults in epicyclic gearboxes. A low-degree-of-freedom model of an epicyclic gearbox which incorporates the possibility of simulating tooth faults, as well as any subsequent tooth contact loss due to these faults, is introduced. By combining this model with a simple space-phasor model of an induction motor it is possible to show that, in theory, tooth faults in epicyclic gearboxes may be identified from motor currents. Applying the synchronous averaging approach to experimentally recorded motor currents and angular displacements recorded from a shaft mounted encoder, validate this finding. Comparison between experiments and theory highlight the influence of operating conditions, backlash and shaft couplings on the transient response excited in the currents by the tooth fault. The results obtained suggest that the method may be a viable alternative or complement to more traditional methods for monitoring gearboxes. However, general observations also indicate that further investigations into the sensitivity and robustness of the method would be beneficial.

  15. Temperature profile and current meter data collected using moored buoy and profiling floats in the North Atlantic Ocean as part of the International Decade of Ocean Exploration / Mid-Ocean Dynamics Experiment (IDOE/MODE) project from 03 October 1972 to 13 July 1973 (NODC Accession 7500548)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, pressure, east-west current component, north-south current component, fluorescence, and other data were collected using moored buoy and profiling...

  16. Current, profile, and other data from current meters and CTD casts from NOAA Ship DISCOVERER and other platforms from the NW Pacific (limit-180) as part of the VENTS program from 1991-06-11 to 1992-06-11 (NCEI Accession 9300078)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current, profile, and other data were collected from current meters and CTD casts from NOAA Ship Discoverer and other platforms from the NW Pacific (limit-180) from...

  17. Field Measurements at River and Tidal Current Sites for Hydrokinetic Energy Development: Best Practices Manual

    Energy Technology Data Exchange (ETDEWEB)

    Neary, Vincent S [ORNL; Gunawan, Budi [Oak Ridge National Laboratory (ORNL)

    2011-09-01

    In this report, existing data collection techniques and protocols for characterizing open channel flows are reviewed and refined to further address the needs of the MHK industry. The report provides an overview of the hydrodynamics of river and tidal channels, and the working principles of modern acoustic instrumentation, including best practices in remote sensing methods that can be applied to hydrokinetic energy site characterization. Emphasis is placed upon acoustic Doppler velocimeter (ADV) and acoustic-Doppler current profiler (ADCP) instruments, as these represent the most practical and economical tools for use in the MHK industry. Incorporating the best practices as found in the literature, including the parameters to be measured, the instruments to be deployed, the instrument deployment strategy, and data post-processing techniques. The data collected from this procedure aims to inform the hydro-mechanical design of MHK systems with respect to energy generation and structural loading, as well as provide reference hydrodynamics for environmental impact studies. The standard metrics and protocols defined herein can be utilized to guide field experiments with MHK systems.

  18. The Feasibility of Sodar Wind Profile Measurements from an Oceanographic Buoy

    Science.gov (United States)

    2006-09-01

    with cup anemometer measurements (Jorgenson et. al., 2004). The main difficulty in the CW approach is how to determine range. The ZephIR uses a...Doppler LIDAR – Comparison with Cup Anemometers at RISØ. Proc. European Wind Energy Conference, Delft, April 2004, pp. 1–6. Pierce, Allan D. (1981...misalignment of winds and currents. One way to improve the model in the future would be to equip ASIS with an anemometer , a downward-looking ADCP, and a GPS

  19. CURRENT TRENDS IN MICROBIAL PROFILE AND RESISTANCE PATTERN IN CSOM IN A SEMIURBAN HOSPITAL OF SOUTHERN INDIA

    Directory of Open Access Journals (Sweden)

    Upasana

    2016-04-01

    Full Text Available BACKGROUND Infections of the middle ear space and their sequelae have plagued mankind from the beginning of time. Since there are variations in aetiological agents and their antimicrobial susceptibility patterns regionally. It is pertinent to carry out ongoing studies to observe the profile of aetiological agents and their resistance patterns. This would help clinicians to prescribe appropriate and effective antibiotics and prevent emergence of Multi-Drug Resistant (MDR bacteria. AIM To study the spectrum of aerobic bacterial and fungal aetiological agents among patients clinically diagnosed as CSOM. METHODS AND MATERIAL This study was conducted on 105 patients of clinically diagnosed cases of CSOM attending ENT OPD of a semi-urban tertiary care level hospital. After proper sample collection by sterile aural swabs, they were immediately sent to the microbiology laboratory for aerobic bacterial and fungal culture, isolation and identification. Routine antibacterial susceptibility and detection of MRSA and ESBL was carried as per CLSI guidelines. RESULTS AND CONCLUSION The commonest age group affected was 10 months - 10 years (30/28.5%, mainly affecting males (59.4%. Patients were mainly from rural background (81.91% and majority of cases were reported in the months of May to August. Out of 105 patients, Gram negative isolates were 54 (51.4% and Gram positive isolates were 34 (32.4%, 10 (9.5% were fungal isolates and remaining 12 (11.4% showed no growth. P. aeruginosa (34.3% was the predominant bacterial organism isolated followed by Staphylococcus aureus (28.6%. Out of 30 isolates of S. aureus, 10 (33.3% were MRSA and out of 18 Gram negative isolates, 6 (33.3% were ESBL producers. Antibiogram of all isolates revealed that Amikacin was the most sensitive drug amongst all gram positive and gram negative organisms. Imipenem was the most sensitive drug among gram negative isolates, whereas Vancomycin was the most sensitive drug among gram positive

  20. Oceanographic data from ADCP, microprofiler, and thermistor casts from the MOANA WAVE from the SW Pacific (limit-147 E to 140 W) as part of the Tropical Ocean Global Atmosphere (TOGA) and the Coupled Ocean-Atmosphere Response Experiment (COARE) from 01 July 1992 to 30 June 1993 (NODC Accession 9600029)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic data were collected from ADCP, microprofiler, and thermister casts from the MOANA WAVE from the SW Pacific (limit-147 E to 140 W) from 01 July 1992 to...

  1. Correcting acoustic Doppler current profiler discharge measurement bias from moving-bed conditions without global positioning during the 2004 Glen Canyon Dam controlled flood on the Colorado River

    Science.gov (United States)

    Gartner, J.W.; Ganju, N.K.

    2007-01-01

    Discharge measurements were made by acoustic Doppler current profiler at two locations on the Colorado River during the 2004 controlled flood from Glen Canyon Dam, Arizona. Measurement hardware and software have constantly improved from the 1980s such that discharge measurements by acoustic profiling instruments are now routinely made over a wide range of hydrologic conditions. However, measurements made with instruments deployed from moving boats require reliable boat velocity data for accurate measurements of discharge. This is normally accomplished by using special acoustic bottom track pings that sense instrument motion over bottom. While this method is suitable for most conditions, high current flows that produce downstream bed sediment movement create a condition known as moving bed that will bias velocities and discharge to lower than actual values. When this situation exists, one solution is to determine boat velocity with satellite positioning information. Another solution is to use a lower frequency instrument. Discharge measurements made during the 2004 Glen Canyon controlled flood were subject to moving-bed conditions and frequent loss of bottom track. Due to site conditions and equipment availability, the measurements were conducted without benefit of external positioning information or lower frequency instruments. This paper documents and evaluates several techniques used to correct the resulting underestimated discharge measurements. One technique produces discharge values in good agreement with estimates from numerical model and measured hydrographs during the flood. ?? 2007, by the American Society of Limnology and Oceanography, Inc.

  2. Sarcolemmal Ca(2+)-entry through L-type Ca(2+) channels controls the profile of Ca(2+)-activated Cl(-) current in canine ventricular myocytes.

    Science.gov (United States)

    Horváth, Balázs; Váczi, Krisztina; Hegyi, Bence; Gönczi, Mónika; Dienes, Beatrix; Kistamás, Kornél; Bányász, Tamás; Magyar, János; Baczkó, István; Varró, András; Seprényi, György; Csernoch, László; Nánási, Péter P; Szentandrássy, Norbert

    2016-08-01

    Ca(2+)-activated Cl(-) current (ICl(Ca)) mediated by TMEM16A and/or Bestrophin-3 may contribute to cardiac arrhythmias. The true profile of ICl(Ca) during an actual ventricular action potential (AP), however, is poorly understood. We aimed to study the profile of ICl(Ca) systematically under physiological conditions (normal Ca(2+) cycling and AP voltage-clamp) as well as in conditions designed to change [Ca(2+)]i. The expression of TMEM16A and/or Bestrophin-3 in canine and human left ventricular myocytes was examined. The possible spatial distribution of these proteins and their co-localization with Cav1.2 was also studied. The profile of ICl(Ca), identified as a 9-anthracene carboxylic acid-sensitive current under AP voltage-clamp conditions, contained an early fast outward and a late inward component, overlapping early and terminal repolarizations, respectively. Both components were moderately reduced by ryanodine, while fully abolished by BAPTA, but not EGTA. [Ca(2+)]i was monitored using Fura-2-AM. Setting [Ca(2+)]i to the systolic level measured in the bulk cytoplasm (1.1μM) decreased ICl(Ca), while application of Bay K8644, isoproterenol, and faster stimulation rates increased the amplitude of ICl(Ca). Ca(2+)-entry through L-type Ca(2+) channels was essential for activation of ICl(Ca). TMEM16A and Bestrophin-3 showed strong co-localization with one another and also with Cav1.2 channels, when assessed using immunolabeling and confocal microscopy in both canine myocytes and human ventricular myocardium. Activation of ICl(Ca) in canine ventricular cells requires Ca(2+)-entry through neighboring L-type Ca(2+) channels and is only augmented by SR Ca(2+)-release. Substantial activation of ICl(Ca) requires high Ca(2+) concentration in the dyadic clefts which can be effectively buffered by BAPTA, but not EGTA.

  3. Food Insecurity among American Indians and Alaska Natives: A National Profile using the Current Population Survey-Food Security Supplement.

    Science.gov (United States)

    Jernigan, Valarie Blue Bird; Huyser, Kimberly R; Valdes, Jimmy; Simonds, Vanessa Watts

    2017-01-01

    Food insecurity increases the risk for obesity, diabetes, hypertension, and cancer-conditions highly prevalent among American Indians and Alaska Natives (AI/ANs). Using the Current Population Survey Food Security Supplement, we analyzed the food insecurity trends of AI/ANs compared to other racial and ethnic groups in the United States from 2000 to 2010. From 2000 to 2010, 25% of AI/ANs remained consistently food insecure and AI/ANs were twice as likely to be food insecure compared to whites. Urban AI/ANs were more likely to experience food insecurity than rural AI/ANs. Our findings highlight the need for national and tribal policies that expand food assistance programs; promote and support increased access to healthy foods and community food security, in both rural and urban areas; and reduce the burden of diet-related disparities on low-income and racial/ethnic minority populations.

  4. Quasi-two-dimensional subthreshold current model of deep submicrometer SOI drive-in gate controlled hybrid transistors with lateral non-uniform doping profile

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    We have analyzed the operating mechanism of the novel deep submicrometer SOI drive-in gate controlled hybrid transistor (DGCHT), which can effectively alleviate the contradiction between speed enhancement and power reduction in conventional MOS devices and can improve the output resistance. On the basis of this, the subthreshold current model of DGCHTs is proposed. The model takes into account the impact of lateral non-uniform doping profile on body effect, short-channel effect and carrier mobility. Considering the mobile charge, two-dimensional Poisson equation is solved with quasi-two-dimensional analysis and parabolic approximation of surface potential. With the surface potential obtained, the subthreshold current is figured out, including both the diffusion and drift component. The calculated results are in good agreement with the MEDICI numerical simulation results, indicating the correct description of the current characteristics of SOI DGCHT by the presented model. The model can also be considered as an important reference to the current simulation of deep submicrometer MOSFET with pocket implantation.

  5. COMPENDEX Profiling Guide.

    Science.gov (United States)

    Standera, Oldrich

    This manual provides instructions for completing the COMPENDEX (Computerized Engineering Index) Profile Submission Form used to prepare Current Information Selection (CIS) profiles. An annotated bibliography lists nine items useful in searching for proper profile words. (AB)

  6. Flow Patterns and Morphological Changes in a Sandy Meander Bend during a Flood—Spatially and Temporally Intensive ADCP Measurement Approach

    Directory of Open Access Journals (Sweden)

    Elina Kasvi

    2017-02-01

    Full Text Available The fluvio-geomorphological processes in meander bends are spatially uneven in distribution. Typically, higher velocities and erosion take place near the outer bank beyond the bend apex, while the inner bend point bar grows laterally towards the outer bank, increasing the bend amplitude. These dynamics maintain the meander evolution. Even though this development is found in meandering rivers independent of soil or environmental characteristics, each river still seems to behave unpredictably. The special mechanisms that determine the rate and occasion of morphological changes remain unclear. The aim of this study is to offer new insights regarding flow-induced morphological changes in meander using a novel study approach. We focused on short-term and small-spatial-scale changes by conducting a spatially and temporally (daily intensive survey during a flood (a period of nine days with an ADCP attached to a remotely controlled mini-boat. Based on our analysis, the flood duration and the rate of discharge increase and decrease seems to play key roles in determining channel changes by controlling the flow velocities and depth and the backwater effect may have notable influence on the morphological processes. We discuss themes such as the interaction of inner and outer bend processes and the longer-term development of meander bends.

  7. ADCP、OBS在底部泥沙运动观测中的应用探讨%Disscussion on Application of ADCP & OBS in Bottom Sediment Movement Observation

    Institute of Scientific and Technical Information of China (English)

    杨俊辉

    2009-01-01

    The ship speed is zero under the condition of ADCP in the fixed-point measurement. When the ship is in the still state,the trajectory of ship in theory namely is the one of the bottom sand. At this time,comparing the ship's trajectory referring to the bottom follow-up observation with that observed by the simultaneous GPS-RTK,the situation of the bottom sand movement can be seen indirectly. At the same time,a real-time synchronization measurrement of the bottom sand concentration can be made by using OBS. According to the comparisons of ship's trajectory and the observed bottom sand concentration,the regularities of the bottom sand motion are studied.%ADCP在定点测量时船速为零,在船静止状态下,理论上船的运动轨迹即为底沙的运动轨迹.此时参考底跟踪观测到的船的运动轨迹与同步GPS-RTK观测到的船的运动轨迹比对,可以间接看出底沙运动的情况;同时利用OBS,可以同步实时测得底沙浓度.根据船的运动轨迹比对和测定的底沙浓度.从而研究底沙的运动规律.

  8. Analyzing Magnetic Field and Electrical Current Profiles of the Day Side and Terminator of Mars Using Data from Mars Global Surveyor (MGS)

    Science.gov (United States)

    Fogle, A. L.; Ponce, N.; Fillingim, M. O.

    2014-12-01

    Mars does not have a global magnetic field, so the interplanetary magnetic field (IMF) can impact the upper atmosphere and induce currents in the Martian ionosphere. During aerobraking maneuvers, Mars Global Surveyor (MGS) made over 1000 passes through the Martian ionosphere. During the aerobraking phase, MGS measured the local magnetic field in the ionosphere. From measuring changes in the magnetic field, we can calculate the ionospheric currents. By only using measurements where the radial component of the magnetic field is zero and making some assumptions about the gradients in the magnetic field, we are allowed to classify data that meets those conditions as "good" data and calculate horizontal currents in the ionosphere. We focus on data taken over regions of Mars that had negligible crustal magnetic fields to simplify our analysis. The data being analyzed is observed at a maximum altitude of 250 kilometers with a solar zenith angle (SZA) range of 0 degrees to 50 degrees for the day side and 50 to 130 degrees for the terminator. For the day side of Mars, it was found that 24.06% of the data observed was usable data under the initial parameters that were set for "good" data. For the terminator, it was found that 32.08% of the data was usable. The currents that are computed using these "good" magnetic field profiles can give us insights into how the changing solar wind and interplanetary magnetic field can effect the upper atmosphere of mars. For example, induced currents can lead to Joule heating of the atmosphere potentially modifying the neutral dynamics.

  9. First results from Acoustic Doppler Current Profiler measurements of meltwater flux in a large supraglacial river in western Greenland compared with downstream proglacial river outflow

    Science.gov (United States)

    Pitcher, L. H.; Smith, L. C.; Overstreet, B. T.; Chu, V. W.; Rennermalm, A. K.; Cooper, M. G.; Gleason, C. J.; Yang, K.

    2015-12-01

    A vast network of seasonally evolving, thermally eroding supraglacial rivers on the southwestern Greenland Ice Sheet (GrIS) is the preeminent transporter of meltwater across this area of the ablation zone. Supraglacial rivers are important for estimating surface water storage and transport into moulins and into the en-, sub-, and proglacial environments. Yet, little is known about their role in the GrIS cryo-hydrologic system. To that end, supraglacial river discharge in a large river, the "Rio Behar" (67.05°, -49.02°; ~75 km from the Kangerlussuaq International Airport), was measured in situ over 300 times: approximately four times per hour over three consecutive days from July 19 - 22, 2015. The Rio Behar drains a ~ 70 km2 ice catchment and enters a large moulin in the Watson River land-ice watershed in western Greenland. River discharge was measured using a Sontek M9 Acoustic Doppler Current Profiler. Each profile records water temperature, depth-integrated velocity, channel width and channel bathymetry. This novel dataset can be used to assess diurnal variations in river discharge, slope, velocity, stream power, and channel incision in order to enhance process-level understanding of GrIS meltwater routing, storage and transport. Future work will compare supraglacial river discharge in the Rio Behar with in situ estimates of proglacial river outflow upstream of the Watson River bridge in Kangerlussuaq, Greenland.

  10. Current levels and composition profiles of PBDEs and alternative flame retardants in surface sediments from the Pearl River Delta, southern China: Comparison with historical data

    Energy Technology Data Exchange (ETDEWEB)

    Chen, She-Jun [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Feng, An-Hong; He, Ming-Jing; Chen, Man-Ying [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Luo, Xiao-Jun [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Mai, Bi-Xian, E-mail: nancymai@gig.ac.cn [State Key Laboratory of Organic Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China)

    2013-02-01

    Polybrominated diphenyl ethers (PBDEs) and alternative flame retardants were measured in surface sediments collected during 2009–2010 from the Pearl River Delta, southern China (a large manufacturing base for electronics/electrical products), to evaluate the influence of China's RoHS directive (adopted in 2006) on their environmental occurrence. The concentrations in sediments from different water systems ranged from 3.67 to 2520 ng/g (average of 17.1–588 ng/g) for PBDEs and from 0.22 to 5270 ng/g (average of 11.3–454 ng/g) for the alternative retardants. Although the PBDE levels have decreased significantly compared with those in sediments collected in 2002 in this region, the levels of alternative decabromodiphenyl ethane (DBDPE) have exceeded those of BDE209 (two predominant halogenated flame retardants (HFRs) in China) in the majority of sediments. This finding suggests a different contaminant pattern of HFRs in current sediments due to the replacement of the deca-BDE mixture with DBDPE in this region. In addition, sediment concentrations of discontinued PBDEs in the rural area are clearly elevated due to e-waste dismantling. The congener profiles of PBDEs in the current sediments (with more abundant lower-brominated congeners) differed substantially from those in 2002 and from the technical products, suggesting that biological or photolytic debromination of PBDEs may have occurred in the environment. - Highlights: ► PBDE levels in sediments have decreased substantially since China's RoHS directive. ► Contamination of novel DBDPE has exceeded that of deca-BDE in the PRD sediments. ► The congener profiles of PBDEs in the sediments have changed significantly. ► Significant biological or photolytic degradation of PBDEs may occur in the environment.

  11. Anti-addiction drug ibogaine inhibits voltage-gated ionic currents: A study to assess the drug's cardiac ion channel profile

    Energy Technology Data Exchange (ETDEWEB)

    Koenig, Xaver; Kovar, Michael; Rubi, Lena; Mike, Agnes K.; Lukacs, Peter; Gawali, Vaibhavkumar S.; Todt, Hannes [Center for Physiology and Pharmacology, Department of Neurophysiology and -pharmacology, Medical University of Vienna, 1090 Vienna (Austria); Hilber, Karlheinz, E-mail: karlheinz.hilber@meduniwien.ac.at [Center for Physiology and Pharmacology, Department of Neurophysiology and -pharmacology, Medical University of Vienna, 1090 Vienna (Austria); Sandtner, Walter [Center for Physiology and Pharmacology, Institute of Pharmacology, Medical University of Vienna, 1090 Vienna (Austria)

    2013-12-01

    The plant alkaloid ibogaine has promising anti-addictive properties. Albeit not licenced as a therapeutic drug, and despite hints that ibogaine may perturb the heart rhythm, this alkaloid is used to treat drug addicts. We have recently reported that ibogaine inhibits human ERG (hERG) potassium channels at concentrations similar to the drugs affinity for several of its known brain targets. Thereby the drug may disturb the heart's electrophysiology. Here, to assess the drug's cardiac ion channel profile in more detail, we studied the effects of ibogaine and its congener 18-Methoxycoronaridine (18-MC) on various cardiac voltage-gated ion channels. We confirmed that heterologously expressed hERG currents are reduced by ibogaine in low micromolar concentrations. Moreover, at higher concentrations, the drug also reduced human Na{sub v}1.5 sodium and Ca{sub v}1.2 calcium currents. Ion currents were as well reduced by 18-MC, yet with diminished potency. Unexpectedly, although blocking hERG channels, ibogaine did not prolong the action potential (AP) in guinea pig cardiomyocytes at low micromolar concentrations. Higher concentrations (≥ 10 μM) even shortened the AP. These findings can be explained by the drug's calcium channel inhibition, which counteracts the AP-prolonging effect generated by hERG blockade. Implementation of ibogaine's inhibitory effects on human ion channels in a computer model of a ventricular cardiomyocyte, on the other hand, suggested that ibogaine does prolong the AP in the human heart. We conclude that therapeutic concentrations of ibogaine have the propensity to prolong the QT interval of the electrocardiogram in humans. In some cases this may lead to cardiac arrhythmias. - Highlights: • We study effects of anti-addiction drug ibogaine on ionic currents in cardiomyocytes. • We assess the cardiac ion channel profile of ibogaine. • Ibogaine inhibits hERG potassium, sodium and calcium channels. • Ibogaine’s effects on

  12. Interactions between the Agulhas Current and the eastern margin of the Agulhas Bank

    CSIR Research Space (South Africa)

    Krug, Marjolaine, J

    2014-06-01

    Full Text Available increased Ekman veering along the landward edge of the Agulhas Current and favour the upwelling of cold and nutrient-rich water to the surface (Lutjeharms, 2006). Frontal meanders in the Agulhas Current contribute to water exchange both along and across... record, as seen in Figure 5b. In an attempt to improve the fit between the ADCP and satellite-based observations of ocean currents, we added the Ekman wind drift to the geostrophic current velocities derived from the along-track altimetry. The Ekman...

  13. Temperature profile, current, pressure, physical, and other data from XBT casts, current meters, pressure gauges, and CTD casts from the VEGA I and other platforms from the Coastal Waters of California and other locations as part of the Central California Circulation Study from 1984-01-31 to 1985-07-01 (NCEI Accession 8700197)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile, current, pressure, physical, and other data from the VEGA I and other platforms from the Coastal Waters of California and other locations from...

  14. Temperature profiles, current components, and other data from XBT casts and current meters from AIRCRAFT and other platforms from the TOGA Area - Atlantic as part of the Seasonal Response of the Equatorial Atlantic Experiment/Francais Ocean Et Climat Dans L'Atlantique Equatorial (SEQUAL/FOCAL) project from 1979-01-16 to 1985-01-01 (NCEI Accession 8700213)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profiles and current meter data were collected from AIRCRAFT and other platforms in the NW Atlantic (limit-40 W) from 16 January 1979 to 01 January...

  15. Anti-addiction drug ibogaine inhibits voltage-gated ionic currents: a study to assess the drug's cardiac ion channel profile.

    Science.gov (United States)

    Koenig, Xaver; Kovar, Michael; Rubi, Lena; Mike, Agnes K; Lukacs, Peter; Gawali, Vaibhavkumar S; Todt, Hannes; Hilber, Karlheinz; Sandtner, Walter

    2013-12-01

    The plant alkaloid ibogaine has promising anti-addictive properties. Albeit not licensed as a therapeutic drug, and despite hints that ibogaine may perturb the heart rhythm, this alkaloid is used to treat drug addicts. We have recently reported that ibogaine inhibits human ERG (hERG) potassium channels at concentrations similar to the drugs affinity for several of its known brain targets. Thereby the drug may disturb the heart's electrophysiology. Here, to assess the drug's cardiac ion channel profile in more detail, we studied the effects of ibogaine and its congener 18-Methoxycoronaridine (18-MC) on various cardiac voltage-gated ion channels. We confirmed that heterologously expressed hERG currents are reduced by ibogaine in low micromolar concentrations. Moreover, at higher concentrations, the drug also reduced human Nav1.5 sodium and Cav1.2 calcium currents. Ion currents were as well reduced by 18-MC, yet with diminished potency. Unexpectedly, although blocking hERG channels, ibogaine did not prolong the action potential (AP) in guinea pig cardiomyocytes at low micromolar concentrations. Higher concentrations (≥ 10 μM) even shortened the AP. These findings can be explained by the drug's calcium channel inhibition, which counteracts the AP-prolonging effect generated by hERG blockade. Implementation of ibogaine's inhibitory effects on human ion channels in a computer model of a ventricular cardiomyocyte, on the other hand, suggested that ibogaine does prolong the AP in the human heart. We conclude that therapeutic concentrations of ibogaine have the propensity to prolong the QT interval of the electrocardiogram in humans. In some cases this may lead to cardiac arrhythmias. Copyright © 2013 The Authors. Published by Elsevier Inc. All rights reserved.

  16. Process-based numerical modelling of turbidity currents on a stepped slope-to-basin profile of the Fort Brown Fm., South Africa

    Science.gov (United States)

    Empinotti, Thais; Spychala, Yvonne; Luthi, Stefan; Hodgson, David

    2016-04-01

    The depositional architectures of deep-water turbiditic deposits are strongly influenced by seafloor topography. Slope gradient variations of less than one degree might be sufficient to change the distribution of sands significantly along the basin profile. Stratigraphic units of deep-water sandstones from the Fort Brown Fm. in the Laingsburg depocentre (Karoo Basin, South Africa) are an example of that. Regional mapping and stratigraphic correlation of Units C to F (Van der Merwe et al., 2014) show a change from sand-attached systems in Units C and D to sand-detached systems in Units E and F. The sand-attached systems show a continuity of sands from entrenched slope valleys to basin-floor lobe complexes, while in the sand-detached systems there are widespread sand bypass zones of approximately 10 to 30 km where almost no sand is deposited and erosive features are observed. This is interpreted to reflect the development of a stepped slope profile. Lobe deposits occur before and after the bypass region, but significant differences in depositional architecture are noticed between these lobe deposits. The intraslope lobes are characterized by an aggradational to compensational stacking pattern and a common occurrence of erosive features, while the basin floor lobes show a lateral compensating stacking pattern with less erosive features. In this study, process-based numerical modelling of turbidity currents are performed to test if a stepped slope to basin profile with subtle gradient changes similar to that interpreted for the Laingsburg depocentre during the deposition of Unit E are suitable to generate the sediment distribution pattern observed in the field. Through an iterative modelling workflow we aim to constrain the paleoslope gradient changes using the parameters constrained from outcrop. The study also investigates how flow parameters such as sediment concentration, flow velocity, flow thickness and Froude number behave as a function of different slope

  17. Upper layer current variability in the Central Ligurian Sea

    Directory of Open Access Journals (Sweden)

    P. Picco

    2010-03-01

    Full Text Available Long-time series of surface currents and meteorological parameters were analysed to estimate the variability of the upper layer circulation as a preliminary study of the Ligurian Air-Sea Interaction Experiment (LASIE07. Current meter data were collected by an upward-looking RDI Sentinel 300 kHz ADCP deployed in the Central Ligurian Sea (43°47.77' N; 9°02.85' E near the meteo-oceanographic buoy ODAS ITALIA1 for over eight months. The ADCP sampled the upper 50 m of water column at 8 m vertical resolution and 1 h time interval; surface marine and atmospheric hourly data were provided by the buoy. Currents were mainly barotropic and directed NW, according to the general circulation of the area, had a mean velocity of about 18 cm s−1 and hourly mean peaks up to 80 m s−1. Most of the observed variability in the upper thermocline was determined by inertial currents and mesoscale activity due to the presence of the Ligurian Front. Local wind had a minor role in the near-surface circulation but induced internal waves propagating downward in the water column.

  18. Physical, chemical, current profile, water pressure, sea surface temperature, meteorological, and other data from current meters, bottle casts, pressure gauges, meteorological sensors, current meters, and other instruments from the ANDRE NIZERY and other platforms from the TOGA Area - Atlantic as part of the Seasonal Response of the Equatorial Atlantic Experiment/Francais Ocean Et Climat Dans L'Atlantique Equatorial (SEQUAL/FOCAL) project from 01 January 1964 to 31 December 1985 (NODC Accession 8700150)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Physical, chemical, current profile, water pressure, sea surface temperature, meteorological, and other data were collected from the ANDRE NIZERY and other platforms...

  19. Observed seasonal and intraseasonal variability of the East India Coastal Current on the continental slope

    Indian Academy of Sciences (India)

    A Mukherjee; D Shankar; V Fernando; P Amol; S G Aparna; R Fernandes; G S Michael; S T Khalap; N P Satelkar; Y Agarvadekar; M G Gaonkar; A P Tari; A Kankonkar; S Vernekar

    2014-08-01

    We present data from three acoustic Doppler current profilers (ADCPs) moored off Cuddalore (12°N), Kakinada (16.5°N), and Gopalpur (19°N) on the continental slope of the western Bay of Bengal and one mooring on the slope of the northern bay (89°E, 19°N; referred to as being located at Paradip). The data were collected during May 2009 to March 2013 and the observations show that the seasonal cycle, which includes the annual cycle, the semi-annual cycle, and a peak around 120 days, dominates the observed variability of the East India Coastal Current (EICC). Spectral analysis suggests that the 120-day peak dominates the seasonal variability at Paradip and is strong at Gopalpur and Kakinada. The annual cycle is coherent along the western boundary of the bay, i.e., the east coast of India, but with significant phase differences between moorings. At the semi-annual and 120-day periods, the alongshore coherence is weaker. Intraseasonal variability is weaker than the seasonal cycle, particularly at Cuddalore and Paradip, and it exhibits seasonality: the strongest intraseasonal variation is during spring (February–April). Peaks around 12 and 20–22 days are also seen at Gopalpur, Kakinada, and Cuddalore. A striking feature of the currents is the upward phase propagation, but there are also instances when phase propagates downward. The much lower vertical phase speed in the top ∼100 m at Cuddalore leads to a distinct undercurrent at this location; at other locations, the undercurrent, though it exists often, is not as striking. During spring, however, the EICC tends to flow poleward (eastward) at Cuddalore, Kakinada, and Gopalpur (Paradip) over the top ∼300 m, which is the maximum depth to which observations were made. The cross-shore component of the EICC is much weaker than the alongshore component at Cuddalore and, except for a few bursts during spring, at Kakinada and Gopalpur. It is only at Paradip, on the slope of the northern boundary, that significant

  20. Observed seasonal and intraseasonal variability of the East India Coastal Current on the continental slope

    Science.gov (United States)

    Mukherjee, A.; Shankar, D.; Fernando, V.; Amol, P.; Aparna, S. G.; Fernandes, R.; Michael, G. S.; Khalap, S. T.; Satelkar, N. P.; Agarvadekar, Y.; Gaonkar, M. G.; Tari, A. P.; Kankonkar, A.; Vernekar, S.

    2014-08-01

    We present data from three acoustic Doppler current profilers (ADCPs) moored off Cuddalore (12∘N), Kakinada (16.5∘N), and Gopalpur (19∘N) on the continental slope of the western Bay of Bengal and one mooring on the slope of the northern bay (89∘E, 19∘N; referred to as being located at Paradip). The data were collected during May 2009 to March 2013 and the observations show that the seasonal cycle, which includes the annual cycle, the semi-annual cycle, and a peak around 120 days, dominates the observed variability of the East India Coastal Current (EICC). Spectral analysis suggests that the 120-day peak dominates the seasonal variability at Paradip and is strong at Gopalpur and Kakinada. The annual cycle is coherent along the western boundary of the bay, i.e., the east coast of India, but with significant phase differences between moorings. At the semi-annual and 120-day periods, the alongshore coherence is weaker. Intraseasonal variability is weaker than the seasonal cycle, particularly at Cuddalore and Paradip, and it exhibits seasonality: the strongest intraseasonal variation is during spring (February-April). Peaks around 12 and 20-22 days are also seen at Gopalpur, Kakinada, and Cuddalore. A striking feature of the currents is the upward phase propagation, but there are also instances when phase propagates downward. The much lower vertical phase speed in the top ˜100 m at Cuddalore leads to a distinct undercurrent at this location; at other locations, the undercurrent, though it exists often, is not as striking. During spring, however, the EICC tends to flow poleward (eastward) at Cuddalore, Kakinada, and Gopalpur (Paradip) over the top ˜300 m, which is the maximum depth to which observations were made. The cross-shore component of the EICC is much weaker than the alongshore component at Cuddalore and, except for a few bursts during spring, at Kakinada and Gopalpur. It is only at Paradip, on the slope of the northern boundary, that significant

  1. Fatty acid profiles of phyllosoma larvae of western rock lobster (Panulirus cygnus) in cyclonic and anticyclonic eddies of the Leeuwin Current off Western Australia

    Science.gov (United States)

    Wang, M.; O'Rorke, R.; Waite, A. M.; Beckley, L. E.; Thompson, P.; Jeffs, A. G.

    2014-03-01

    The recent dramatic decline in settlement in the population of the spiny lobster, Panulirus cygnus, may be due to changes in the oceanographic processes that operate offshore of Western Australia. It has been suggested that this decline could be related to poor nutritional condition of the post-larvae, especially lipid which is accumulated in large quantities during the preceding extensive pelagic larval stage. The current study focused on investigations into the lipid content and fatty acid (FA) profiles of lobster phyllosoma larvae from three mid to late stages of larval development (stages VI, VII, VIII) sampled from two cyclonic and two anticyclonic eddies of the Leeuwin Current off Western Australia. The results showed significant accumulation of lipid and energy storage FAs with larval development regardless of location of capture, however, larvae from cyclonic eddies had more lipid and FAs associated with energy storage than larvae from anticyclonic eddies. FA food chain markers from the larvae indicated significant differences in the food webs operating in the two types of eddy, with a higher level of FA markers for production from flagellates and a lower level from copepod grazing in cyclonic versus anticyclonic eddies. The results indicate that the microbial food web operating in cyclonic eddies provides better feeding conditions for lobster larvae despite anticyclonic eddies being generally more productive and containing greater abundances of zooplankton as potential prey for lobster larvae. Gelatinous zooplankton, such as siphonophores, may play an important role in cyclonic eddies by accumulating dispersed microbial nutrients and making them available as larger prey for phyllosoma. The markedly superior nutritional condition of lobster larvae feeding in the microbial food web found in cyclonic eddies, could greatly influence their subsequent settlement and recruitment to the coastal fishery.

  2. Multiscale wind cycles and current pulses at the Black Sea eastern boundary

    Science.gov (United States)

    Melnikov, Vasiliy; Moskalenko, Lidija; Piotoukh, Vladimir; Zatsepin, Andrey

    2015-04-01

    The goal of the research is to examine meteorological descriptive elements, sea-water properties, regional hydrodynamics and energy conversion fluxes in order to study sea responses to the local and far-field weather system. The Black Sea is situated in the chain of internal basins between the North Atlantic and Central Asia deserts in the marginal interaction zone and, accordingly, is under the influence of the Azores and Siberian anticyclones, Arctic cold-air surges and subtropical desert belt to the south. The analysis is based on the data of modern oceanographic measuring network "Hydro-physical Polygon" of the Institute of oceanology, using contact and remote sensing methods, weather stations around the Black Sea coasts, including long-term (1938-2014) measurements at the Gelendzhik weather station. Various satellite and Reanalysis databases are used. Currently, there are three long-time measuring moored stations (each contains ADCP and thermistor chain) and scanning profiling system "Akvalog". Hydrological sections and field surveys using towed ADCP and CTD are performed on a regular basis. The data are accumulated in the coastal archive which allows calibration of satellite measurements and testing results of numerical modeling. Data processing includes data sets preparation, editing, time series statistical calculations using histograms, progressive vector diagrams, traditional Fourier spectral analysis including auto- and cross spectra, auto and mutual wavelet diagrams, moving spectrograms, vector data methods using rotary components, spectral invariants, empirical modes, hodograph and pre-specified spectrum representations on the basis of stochastic models with imposed dynamical assumptions. Due to the intermittent nature of the time rows, spectral representation is misleading, often. In order to identify the individual evolving dynamical phenomenon, typical background (seasonal) three-dimensional structures of the hydrological field, as well as

  3. Tide and tidal current observation in the Karimata Strait

    Science.gov (United States)

    Wei, Zexun; Fang, Guohong; Sulistiyo, Budi; Dwi Susanto, R.; Setiawan, Agus; Rameyo Adi, Tukul; Qiao, Fangli; Fan, Bin; Li, Shujiang

    2013-04-01

    It is believed that the water exchanges between the South China Sea and the Indonesian Seas are significant, and play an important role in the water mass formation and air-sea interactions of both the South China Sea and Indonesian Seas. It has also been found that the current in Sunda Strait has been obvious seasonal variation, which indicates the water exchange between West Indonesian Seas and India Ocean. In order to make quantitative evaluation of the magnitudes of the exchange, the First Institute of Oceanography (FIO), China, the Agency for Marine and Fisheries Research, Indonesia, and the Lamont-Doheries Earth Observatory, USA established a collaborative program, "The South-China Sea-Indonesian Seas Transport/Exchange (SITE) and Impacts on Seasonal Fish Migration" in 2006. And, they extend and expand the cooperation to Sunda Strait in 2008, the title of the collaborative program was changed to "The South China Sea - Indonesian Seas Transport/Exchange (SITE) and Dynamics of Sunda and Lombok Straits, and Their Impacts on Seasonal Fish Migration". Till now, 12 joint cruises have been conducted since December, 2007. Ten Trawl-Resistant Bottom Mounts (TRBM) have been deployed in the Karimata and Sunda Straits. The TRBMs are equipped with ADCPs and tide gauges for measuring current profiles and sea levels, respectively. The temperature-salinity profiles were measured with ship-board CTD during the cruises. Data obtained in Karimata Strait revealed that a significant water mass transport. This indicates that the Karimata Strait throughflow can greatly impacts the circulation of both the South China Sea and the Indonesian Seas. The data obtained at the 5 stations alone the two sections in the Karimata Strait were used to study the tide and tidal currents in the Karimata Strait. 2 TRBMs were deployed at Section A, as well as 3 at Section B, which lies at the southeast of Section A. Station B1 is in the Gaspar Strait between Bangka Island and Belitung Island, Stations

  4. Bathymetric Survey Data for the São Francisco River near Torrinha, Bahia, Brazil, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Hydrographic survey data were collected from May 22 through June 10, 2015, using an acoustic Doppler current profiler (ADCP) coupled with an RTK-GNSS rover. The...

  5. Depth Averaged Streamflow Velocity Data for the São Francisco River near Torrinha, Bahia, Brazil, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Hydrographic survey data were collected from May 22 through June 10, 2015, using an acoustic Doppler current profiler (ADCP) coupled with an RTK-GNSS rover. The...

  6. Current inversion and wind relaxation events along the western inner shelf of the Gulf of Cadiz

    Science.gov (United States)

    Garel, Erwan; Relvas, Paulo; Drago, Teresa

    2015-04-01

    At Eastern Boundary Upwelling Systems, warm counter-currents leaning along the coast are recurrently observed inshore of previously upwelled cold water. This feature is well-evidenced in summer by SST satellite imagery along the western part of the northern continental margin of the Gulf of Cadiz, Southern Iberia. At this location, wind driven upwelling prevails roughly from April till October, producing a typical equatorward (eastward) alongshore coastal circulation. This flow temporally alternates with a warm coastal counter-current propagating poleward (westward) that develops during non-upwelling (relaxation) wind conditions. These opposed circulation regimes occur also in winter but without the generation of thermal fronts. The onset of counter-currents along the inner shelf of the Gulf of Cadiz is driven by complex processes. It is generally assumed that inversion events develop when a background alongshore pressure gradient resulting from local wind or large scale atmospheric pressure systems becomes unbalanced during relaxation events. Additional mechanisms may include: strong upwelling jets producing local pressure gradients in the lee of capes and promontories; advection of warm water from very shallow inland areas in the eastern Gulf of Cadiz; and, flow response to short but strong westward wind events (Leventer) that typically occur after upwelling favourable winds. Until now, relatively short (less than 1 month) hydrodynamic observations were available for the study of the processes driving current inversions. The present research compiles 6 Acoustic Doppler Current Meter (ADCP) deployments of 2 to 3 months duration at a single location on the inner shelf (20 m water depth), constituting about 18 months of hourly records. Wind data from an offshore buoy (Cadiz) are also used to define relaxation periods, based on selected thresholds. The excellent correspondence between inversion periods and relaxations confirms that the circulation regime in this area

  7. Fronts and strong currents of the upper southeast Indian Ocean

    Institute of Scientific and Technical Information of China (English)

    HE Zhigang; DONG Zhaoqian; YUAN Xiaojun

    2006-01-01

    Hydrographic data, ADCP velocity and sea level anomaly derived from the satellite altimeter have been jointly analyzed in the southeast Indian Ocean. Results show the locations and orientations of the major oceanic fronts as well as the characteristics of the currents within these fronts in the area. Double subtropical fronts are observed in the section along 120°E, which conflicts with the frontal structure frequently observed before-the North Subtropical Front (NSTF) and South Subtropical Front (SSTF) merge into a single STF between 110°~115°E. The Subantarctic Front (SAF), influenced by the out-of-phase double eddies, runs across 48°S three times between 120° and 127°E. The surface current within the SAF is strengthened up to 105.4 cm/s by the geostrophic effect of these eddies. Furthermore eddies may cause the strong current to split up into two branches within the SAF. The SAF and the primary polar front (PF1) can be identified individually in the ADCP data with a separation distance of about 0.3° at latitude between 140° and 145°E, although they cannot be identified separately in the low-resolution hydrographic data. The different thermohaline characteristics of Circumpolar Deep Water (CDW) and Modified Circumpolar Deep Water (MCDW) result in the formation of Southern Antarctic Circumpolar Current Front (SACCF) in the southeast Indian Ocean. It consistently turns northward along the east flank of the Kerguelen Plateau after it runs through the Princess Elizabeth Trough and turns southward sharply north of 60°S with a little seasonal variations. It is shown that the locations and orientations of the SAF, the primary PF and SACCF in the ACC of the southeast Indian Ocean can be identified more precisely by the current distribution derived from ADCP data than by hydrographic data, because these fronts are usually accompanied by strong currents. However, the locations and orientations of the STF and the secondary PF are more difficult to be identified

  8. Temperature, salinity and currents data from CTD, ADCP and other instruments on the R/V F.G. Walton Smith in the Florida and Loop Currents, May 2007 to July 2008 (NODC Accession 0066847)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Oceanographic data were collected from a variety of sources during three cruises aboard the R/V Walton Smith (WS0714, cruise 1: May 29-June 14, 2007; WS0720, cruise...

  9. Monitoring the onset, propagation, associated bedform migration, and wake of active turbidity currents on the Squamish prodelta slope

    Science.gov (United States)

    Hughes Clarke, J. E.; Pratomo, D. G.; Videira Marques, C. R.

    2012-12-01

    . Multibeam water column imagery is used to view the onset, development and decay of turbidity currents in channels on the Squamish prodelta slope. The 2011 program consisted of daily resurveys for a period of 120 days during the freshet period. The initial focus was on resolving bathymetric surface change. Typical morphologic change indicated intermittent upslope migration of in-channel bedforms, sometimes, but not always, associated with an upper slope discrete slide scar. As a serendipitous byproduct, it was found that the deep scattering layer in the fjord was occasionally perturbed by what appeared to be bottom-following intrusive flows. A distally-located, seabed-mounted ADCP confirmed 20 discrete turbidity current events. Surface lowered, optical backscatter profiles indicated that these intrusions were correlated with near-seabed turbidity peaks. In 2012, a week-long program was implemented using hourly resurveys of the channels around the low water spring tide periods. Repetitive underway optical backscatter and CTD profiles were collected extending along the active channels from the delta lip to 1000m offshore. These established the sediment load and relative buoyancy of the surface plume and the fact that the enhanced acoustic volume scattering below represented a descending rain of suspended sediments into the higher density saline lower layers. For several of the events, that descending plume was seen to markedly increase in turbidity close to the seabed, indicating a transition to hyperpycnal conditions. A drop of salinity was also associated with those near seabed high turbidity layers. Those events were followed by the onset of a turbidity current as interpreted from the acoustic volume scattering. The period of upslope bedform migration was restricted to the onset of basal turbidity and first appearance of the flow in the acoustic volume scattering. In the wake of the active flow, an anomalously low acoustic scattering cloud would appear above the

  10. Temperature profile and other data collected using current meter from the CHAIN from the Atlantic Ocean in part of the International Decade of Ocean Exploration / Mid-Ocean Dynamics Experiment from 12 February 1969 to 16 March 1972 (NODC Accession 7601355)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile, current meter, and wind speed/direction data were collected using current meter from the TRIDENT, KNORR, and BILLIE 2 in the Atlantic Ocean from...

  11. Comparison of dietary profile of a rural south Indian population with the current dietary recommendations for prevention of non-communicable diseases (CURES 147

    Directory of Open Access Journals (Sweden)

    Narasimhan Sowmya

    2016-01-01

    Interpretation & conclusions: The dietary profile of this rural south Indian population reflected unhealthy choices, with the high consumption of refined cereals in the form of polished white rice and low intake of protective foods like fruits, vegetables, n-3 poly and monounsaturated fatty acids. This could potentially contribute to the increase in prevalence of NCDs like diabetes, hypertension and cardiovascular diseases in rural areas and calls for appropriate remedial action.

  12. The Profile of Patients and Current Practice of Treatment of Upper Limb Muscle Spasticity with Botulinum Toxin Type A: An International Survey

    Science.gov (United States)

    Bakheit, Abdel Magid

    2010-01-01

    To document the current practice in relation with the treatment of patients with upper limb spasticity with botulinum toxin type A to inform future research in this area. We designed an international, cross-sectional, noninterventional survey of current practice. Nine hundred and seventy-four patients from 122 investigational centres in 31…

  13. Quantifying water flow within aquatic ecosystems using load cell sensors: a profile of currents experienced by coral reef organisms around Lizard Island, Great Barrier Reef, Australia.

    Science.gov (United States)

    Johansen, Jacob L

    2014-01-01

    Current velocity in aquatic environments has major implications for the diversity, abundance and ecology of aquatic organisms, but quantifying these currents has proven difficult. This study utilises a simple and inexpensive instrument (reef system around Lizard Island (Great Barrier Reef, Australia) at a spatial and temporal scale relevant to the ecology of individual benthos and fish. The instrument uses load-cell sensors to provide a correlation between sensor output and ambient current velocity of 99%. Each instrument is able to continuously record current velocities to >500 cms⁻¹ and wave frequency to >100 Hz over several weeks. Sensor data are registered and processed at 16 MHz and 10 bit resolution, with a measuring precision of 0.06±0.04%, and accuracy of 0.51±0.65% (mean ±S.D.). Each instrument is also pressure rated to 120 m and shear stresses ≤20 kNm⁻² allowing deployment in harsh environments. The instrument was deployed across 27 coral reef sites covering the crest (3 m), mid-slope (6 m) and deep-slope (9 m depth) of habitats directly exposed, oblique or sheltered from prevailing winds. Measurements demonstrate that currents over the reef slope and crest varies immensely depending on depth and exposure: currents differ up to 9-fold within habitats only separated by 3 m depth and 15-fold between exposed, oblique and sheltered habitats. Comparisons to ambient weather conditions reveal that currents around Lizard Island are largely wind driven. Zero to 22.5 knot winds correspond directly to currents of 0 to >82 cms⁻¹, while tidal currents rarely exceed 5.5 cms⁻¹. Rather, current velocity increases exponentially as a function of wave height (0 to 1.6 m) and frequency (0.54 to 0.20 Hz), emphasizing the enormous effect of wind and waves on organisms in these shallow coral reef habitats.

  14. Variability of currents in front of the Venice Lagoon, Northern Adriatic Sea

    Energy Technology Data Exchange (ETDEWEB)

    Cosoli, S.; Gacic, M. [Istituto Nazionale di Oceanografia e di Geofisica Sperimentale - OGS, Sgonico (Trieste) (Italy); Mazzoldi, A. [Consiglio Nazionale delle Ricerche - ISMAR-CNR, Venice (Italy). Ist. di Scienze Marine

    2008-07-01

    Time scales and modes of variability of the flow in the water column in the Northern Adriatic Sea for late summer 2002 are described based on current record from a single bottom-mounted ADCP in the shallow-water area in front of the Venice Lagoon. The time averaged flow was directed 277 E (CCW), roughly aligned with the coastline, with typical magnitudes in the range 4-6 cm/s and a limited, not significant clockwise veering with depth. Tidal forcing was weak and mainly concentrated in the semidiurnal frequency band, with a barotropic (depth-independent) structure. On a diurnal time scale, tidal signal was biased by the sea-breeze regime and was characterized by a clockwise veering with depth according to the Ekman spiral. A complex EOF analysis on the velocity profile time series extracted two dominant spatial modes of variability, which explained more than 90% of the total variance in the current field. More than 78% of the total variance was accounted for by the first EOF mode, with a barotropic structure that contained the low-frequency components and the barotropic tidal signal at semidiurnal and diurnal frequencies. The second mode had a baroclinic structure with a zero-crossing at mid-depth, which was related with the response of the water column to the high-frequency wind-driven diurnal sea breeze variability. The response of low-passed non-tidal currents to local wind stress was fast and immediate, with negligible temporal lag up to mid-depth. Currents vectors were pointing to the right of wind stress, as expected from the surface Ekman veering, but with angles smaller than the expected ones. A time lag in the range 10 to 11 h was found below 8 m depth, with current vectors pointing to the left of wind stress and a counterclockwise veering towards the bottom. The delay was consistent with the frictional adjustment time scale describing the dynamics of a frictionally dominated flow in shallow water, thus suggesting the importance of bottom friction on the

  15. Variability of currents in front of the Venice Lagoon, Northern Adriatic Sea

    Directory of Open Access Journals (Sweden)

    S. Cosoli

    2008-05-01

    Full Text Available Time scales and modes of variability of the flow in the water column in the Northern Adriatic Sea for late summer 2002 are described based on current record from a single bottom-mounted ADCP in the shallow-water area in front of the Venice Lagoon.

    The time averaged flow was directed 277° E (CCW, roughly aligned with the coastline, with typical magnitudes in the range 4–6 cm/s and a limited, not significant clockwise veering with depth. Tidal forcing was weak and mainly concentrated in the semidiurnal frequency band, with a barotropic (depth-independent structure. On a diurnal time scale, tidal signal was biased by the sea-breeze regime and was characterized by a clockwise veering with depth according to the Ekman spiral.

    A complex EOF analysis on the velocity profile time series extracted two dominant spatial modes of variability, which explained more than 90% of the total variance in the current field. More than 78% of the total variance was accounted for by the first EOF mode, with a barotropic structure that contained the low-frequency components and the barotropic tidal signal at semidiurnal and diurnal frequencies. The second mode had a baroclinic structure with a zero-crossing at mid-depth, which was related with the response of the water column to the high-frequency wind-driven diurnal sea breeze variability.

    The response of low-passed non-tidal currents to local wind stress was fast and immediate, with negligible temporal lag up to mid-depth. Currents vectors were pointing to the right of wind stress, as expected from the surface Ekman veering, but with angles smaller than the expected ones. A time lag in the range 10 to 11 h was found below 8 m depth, with current vectors pointing to the left of wind stress and a counterclockwise veering towards the bottom. The delay was consistent with the frictional adjustment time scale describing the dynamics of a frictionally dominated flow in shallow water, thus

  16. Quantifying water flow within aquatic ecosystems using load cell sensors: a profile of currents experienced by coral reef organisms around Lizard Island, Great Barrier Reef, Australia.

    Directory of Open Access Journals (Sweden)

    Jacob L Johansen

    Full Text Available Current velocity in aquatic environments has major implications for the diversity, abundance and ecology of aquatic organisms, but quantifying these currents has proven difficult. This study utilises a simple and inexpensive instrument (500 cms⁻¹ and wave frequency to >100 Hz over several weeks. Sensor data are registered and processed at 16 MHz and 10 bit resolution, with a measuring precision of 0.06±0.04%, and accuracy of 0.51±0.65% (mean ±S.D.. Each instrument is also pressure rated to 120 m and shear stresses ≤20 kNm⁻² allowing deployment in harsh environments. The instrument was deployed across 27 coral reef sites covering the crest (3 m, mid-slope (6 m and deep-slope (9 m depth of habitats directly exposed, oblique or sheltered from prevailing winds. Measurements demonstrate that currents over the reef slope and crest varies immensely depending on depth and exposure: currents differ up to 9-fold within habitats only separated by 3 m depth and 15-fold between exposed, oblique and sheltered habitats. Comparisons to ambient weather conditions reveal that currents around Lizard Island are largely wind driven. Zero to 22.5 knot winds correspond directly to currents of 0 to >82 cms⁻¹, while tidal currents rarely exceed 5.5 cms⁻¹. Rather, current velocity increases exponentially as a function of wave height (0 to 1.6 m and frequency (0.54 to 0.20 Hz, emphasizing the enormous effect of wind and waves on organisms in these shallow coral reef habitats.

  17. Canonical discrimination of the effect of a new broiler production facility on soil chemical profiles as related to current management practices.

    Directory of Open Access Journals (Sweden)

    Cynthia L Sheffield

    Full Text Available The effect dirt-floored broiler houses have on the underlying native soil, and the potential for contamination of the ground water by leaching under the foundation, is an understudied area. This study examines alterations in fifteen quantitative soil parameters (Ca, Cu, electrical conductivity, Fe, K, Mg, Mn, Na, NO3, organic matter, P, pH, S, soil moisture and Zn in the underlayment of a newly constructed dirt-floored broiler house over the first two years of production (Native through Flock 11. The experiment was conducted near NW Robertson County, Texas, where the native soil is a fine, smectitic thermic Udertic Paleustalfs and the slopes range from zero to three percent. Multiple samples were collected from under each of three water and three feed lines the length of the house, in a longitudinal study during February 2008 through August 2010. To better define the relationship between the soil parameters and sampling times, a canonical discriminant analysis approach was used. The soil profiles assembled into five distinctive clusters corresponding to time and management practices. Results of this work revealed that the majority of parameters increased over time. The management practices of partial and total house clean-outs markedly altered soil profiles the house underlayment, thus reducing the risk of infiltration into the ground water near the farm. This is important as most broiler farms consist of several houses within a small area, so the cumulative ecological impact could be substantial if not properly managed.

  18. Canonical discrimination of the effect of a new broiler production facility on soil chemical profiles as related to current management practices.

    Science.gov (United States)

    Sheffield, Cynthia L; Crippen, Tawni L; Byrd, J Allen; Beier, Ross C; Yeater, Kathleen

    2015-01-01

    The effect dirt-floored broiler houses have on the underlying native soil, and the potential for contamination of the ground water by leaching under the foundation, is an understudied area. This study examines alterations in fifteen quantitative soil parameters (Ca, Cu, electrical conductivity, Fe, K, Mg, Mn, Na, NO3, organic matter, P, pH, S, soil moisture and Zn) in the underlayment of a newly constructed dirt-floored broiler house over the first two years of production (Native through Flock 11). The experiment was conducted near NW Robertson County, Texas, where the native soil is a fine, smectitic thermic Udertic Paleustalfs and the slopes range from zero to three percent. Multiple samples were collected from under each of three water and three feed lines the length of the house, in a longitudinal study during February 2008 through August 2010. To better define the relationship between the soil parameters and sampling times, a canonical discriminant analysis approach was used. The soil profiles assembled into five distinctive clusters corresponding to time and management practices. Results of this work revealed that the majority of parameters increased over time. The management practices of partial and total house clean-outs markedly altered soil profiles the house underlayment, thus reducing the risk of infiltration into the ground water near the farm. This is important as most broiler farms consist of several houses within a small area, so the cumulative ecological impact could be substantial if not properly managed.

  19. Closing the Mass Budget between Bering Strait and the Arctic Basin: The Chukchi Slope Current

    Science.gov (United States)

    Corlett, W. B.; Pickart, R. S.

    2016-02-01

    After passing through Bering Strait, Pacific-origin water flows across the Chukchi Sea in different branches that ultimately exit the shelf and provide heat, freshwater, and nutrients to the interior basin. It is important, therefore, to understand where and by what mechanisms the water is fluxed offshore. We have compiled all known shipboard hydrographic sections occupied across the Chukchi shelfbreak and slope that include direct velocity measurements (shipboard ADCP or lowered ADCP). In all, there are 46 sections occupied during the months of May-October from 2002 to 2014, spanning the region from Barrow Canyon to approximately 168°W. The data reveal the presence of a surface-intensified, westward-flowing current over the continental slope, situated offshore of the eastward-flowing shelfbreak jet. We call this feature the Chukchi slope current, which exists under all wind conditions. Using these data plus previously published transport values in Bering Strait and the Beaufort shelfbreak jet, we attempt to close the mass budget of the Chukchi shelf. The mean heat transport of the Chukchi slope current during the summer months is estimated, which has the potential to melt a substantial amount of pack-ice in the Canada Basin and influence the geographical distribution of the ice melt.

  20. DNA profiles from fingermarks.

    Science.gov (United States)

    Templeton, Jennifer E L; Linacre, Adrian

    2014-11-01

    Criminal investigations would be considerably improved if DNA profiles could be routinely generated from single fingermarks. Here we report a direct DNA profiling method that was able to generate interpretable profiles from 71% of 170 fingermarks. The data are based on fingermarks from all 5 digits of 34 individuals. DNA was obtained from the fingermarks using a swab moistened with Triton-X, and the fibers were added directly to one of two commercial DNA profiling kits. All profiles were obtained without increasing the number of amplification cycles; therefore, our method is ideally suited for adoption by the forensic science community. We indicate the use of the technique in a criminal case in which a DNA profile was generated from a fingermark on tape that was wrapped around a drug seizure. Our direct DNA profiling approach is rapid and able to generate profiles from touched items when current forensic practices have little chance of success.

  1. Defect Profile Reconstruction From Pulsed Eddy Current Signals Based on Radial Basis Function Neural Network%基于径向基神经网络的脉冲涡流缺陷轮廓重构

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    采用脉冲涡流技术进行检测时,为准确得到被测缺陷的轮廓,提出了一种基于径向基神经网络的缺陷轮廓重构方法.该方法为降低网络结构对重构结果的影响,采用主成分分析法对网络隐层应选择的最少节点数进行了计算,进而确定了较合理的网络结构;而后采用混合学习算法求得了网络参数,并通过引入梯度信息衰减系数对求解过程进行了优化;最后将其应用于脉冲涡流检测的缺陷轮廓重构实验,结果表明:基于径向基神经网络的缺陷轮廓重构方法不仅具有较高的重构精度而且具有较强的抗噪声干扰能力,是一种有效可行的脉冲涡流缺陷轮廓重构方法.%In order to obtain the defect profile when the pulsed eddy current testing was used, an approach of defect profile reconstruction from pulsed eddy current signals based on radial basis function neural network( RBFNN) was proposed in this paper. To reduce the effect of network structure on reconstruction result, principal components analysis was used to determine the least number of hidden nodes, then the appropriate network structure was determined. The hybrid learning algorithm was used to solve the parameter of RBFNN, and the solving process was optimized by attenuation coefficient of gradient information. Then the pro-posed approach was utilized in the experiment of defect profile reconstruction, the results indicate that the defect profile can be re-constructed accurately and the performance of noise interference suppression of the method is high, thus it is an effective and feasi-ble approach for pulsed eddy current defect profile reconstruction.

  2. Comparison of the volatile emission profiles of ground almond and pistachio mummies: part 1 – addressing a gap in knowledge of current attractants of navel orangeworm

    Science.gov (United States)

    Over the years various tissues of almond and pistachios have been evaluated for their ability to attract the navel orangeworm moth, a major insect pest to almond and pistachio orchards in California. Almond meal, which typically consists of ground almond kernels, is the current monitoring tool for n...

  3. The spatial extent of the Deep Western Boundary Current into the Bounty Trough: new evidence from parasound sub-bottom profiling

    Science.gov (United States)

    Horn, Michael; Uenzelmann-Neben, Gabriele

    2016-06-01

    Deep currents such as the Pacific Deep Western Boundary Current (DWBC) are strengthened periodically in Milankovitch cycles. We studied periodic fluctuations in seismic reflection pattern and reflection amplitude in order to detect cycles in the sedimentary layers of Bounty Trough and bounty fan, east of New Zealand. There, the occurrence of the obliquity frequency is caused only by the DWBC. Therefore, it provides direct evidence for the spatial extent of the DWBC. We can confirm the extent of the DWBC west of the outer sill, previously only inferred via erosional features at the outer sill. Further, our data allow an estimation of the extent of the DWBC into the Bounty Trough, limiting the DWBC presence to east of 178.15°E. Using the presented method a larger dataset will allow a chronological and areal mapping of sedimentation processes and hence provide information on glacial/interglacial cycles.

  4. Dependence of Bootstrap Current, Stability, and Transport on the Safety Factor Profile in DIII-D Steady-State Scenario Discharges

    Energy Technology Data Exchange (ETDEWEB)

    Ferron, J; White, A; Luce, T; Politzer, P; Turco, F; DeBoo, J; Petrie, T; Petty, C; La Haye, R; Hyatt, A; Rhodes, T; Zeng, L; Doyle, E

    2009-10-14

    Conclusions of this report are: (1) In our scans of q{sub min} and q{sub 95}, the bootstrap current fraction increased with q{sub 95} but did not continue to increase with q{sub min} above about 1.5 as expected by f{sub BS} {approx} q{beta}{sub N}; (2) With existing control tools, q{sub min} {approx} 1.5 appears optimal for maximizing bootstrap current if the calculated ideal wall limit can be reached (only narrowly more so than q{sub min} {approx} 1.1); (3) q{sub min} {approx} 2 discharges achieved lower {beta}{sub N} and calculated n = 1 {beta}{sub N} limits, had increased transport, lower density, lower temperature gradients, and as a result did not produce as much bootstrap current; (4) Highest f{sub BS} achieved at highest q{sub 95} (=6.8), but scan suggests lower q{sub 95} is required for more reactor relevant fusion gain G {approx} {beta}{sub N}H{sub 89}/q{sub 95}{sup 2}; (5) New tools (off-axis NBI, more ECCD) may allow access to higher {beta}{sub N} limits and higher bootstrap fractions.

  5. 异形坯双注流保护浇注工艺应用试验%Double Injection Currents Protection Pouring of Profiled Billet

    Institute of Scientific and Technical Information of China (English)

    杨志杰; 周晓雷

    2016-01-01

    结合莱钢生产实际情况,对采用定径水口与浸入式水口相结合方式开发的异形坯双注流保护浇注工艺进行了现场工业应用试验,并采集现场实际数据作为试验结果进行对比分析。结果表明,钢水的洁净度显著提升,对于需要添加合金的钢种,对比敞开浇注工艺,双注流保护浇注工艺降低钢液增氮10×10-6,铸坯中夹杂物总量减少约54%,工艺稳定可靠,满足了现场生产的需求。%According to the practice of Laiwu iron and steel production, the combination approach of the sizing nozzle and the submerged nozzle was developed for the profiled billet double injection protection casting process of industrial field application test. And the actual data of the field was collected as the test results to carry on the comparative analysis. The results showed that the cleanliness of molten steel was significantly improved. For the alloy steels, compared with the open casting process, double jet flow protective casting can reduce 10×10-6 of the nitrogen increasing in molten steel, about 54%of the total nitrogen in casting billet was reduced, about 45.5%of total inclusions in rolling materials was reduced than the open casting process. The process is stable and reliable, and meets the needs of the field production.

  6. Stability, sub-gap current, 1/f-noise, and elemental depth profiling of annealed Al:Mn-AlOX-Al normal metal-insulator-superconducting tunnel junctions

    Science.gov (United States)

    Julin, J. K.; Chaudhuri, S.; Laitinen, M.; Sajavaara, T.; Maasilta, I. J.

    2016-12-01

    In this paper we report a study of the effect of vacuum annealing at 400°C on the properties of normal metal-insulator-superconductor (NIS) tunnel junctions, with manganese doped aluminium (Al:Mn) as the normal metal, aluminum as the superconductor and amorphous aluminum oxide as the tunneling barrier (Al:Mn-AlOx-Al). The annealing treatment improves the stability of the junctions, increases their tunneling resistance and does not have a negative impact on the low-temperature current-voltage characteristics. The measured 1/f resistance noise of the junctions also changes after annealing, in the best case decreasing by over an order of magnitude. All these observations show that annealing is a viable route to improve NIS junction devices after the sample has been fabricated.

  7. Chemical profiling of explosives

    NARCIS (Netherlands)

    Brust, G.M.H.

    2014-01-01

    The primary goal of this thesis is to develop analytical methods for the chemical profiling of explosives. Current methodologies for the forensic analysis of explosives focus on identification of the explosive material. However, chemical profiling of explosives becomes increasingly important, as

  8. Hydrographic, current profile, and other data from STD and other instruments from the NW Pacific (limit-180) from the YAQUINA and other platforms as part of the International Decade of Ocean Exploration / Cooperative Investigations of the Caribbean and Adjacent Regions (IDOE/CICAR) and related projects from 31 July 1972 to 25 August 1972 (NODC Accession 7500531)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Hydrographic, current profiles, and other data were collected from STD and other instruments in the NW Pacific (limit-180) from the YAQUINA from 31 July 1972 to 25...

  9. Temperature, salinity, nutrients, freons, oxygen, currents (ADCP), underway and other measurements collected in the Gulf of Mexico and Atlantic as part of the Gulf of Mexico and East Coast Carbon Cruise (GOMECC) 2007 (NCEI Accession 0066603)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — GOMECC Gulf of Mexico and East Coast Carbon Cruise(RB 07-05). North American Carbon Program (NACP) Gulf of Mexico and East Coast Carbon (GOMECC) Cruise on board NOAA...

  10. Ocean currents data as part of Ordinance Reef Transport Study collected by ADCP from Ordnance Reef area of Oahu, Hawaii from 17 January 2010 to 23 August 2010 (NODC Accession 0079514)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Four high-precision sensor arrays at a conventional munitions disposal site off Waianae known locally as "Ordnance Reef" and one sensor array at a deep-water...

  11. Trends of resistance to antimicrobials recommended currently and in the past for management of gonorrhea in the Apex STD center in India and comparison of antimicrobial resistance profile between 2002-2006 and 2007-2012.

    Science.gov (United States)

    Bala, Manju; Singh, Vikram; Bhargava, Aradhana; Ramesh, V

    2015-04-01

    Antimicrobial resistance in Neisseria gonorrhoeae jeopardizes public health and continues to spread out to currently recommended and older antimicrobial agents. Antimicrobial resistance (AMR) surveillance provides essential clues toward the modification of treatment guidelines. The aim of the study was to determine gonococcal AMR profile and trends between 2007 and 2012 and to evaluate any change in AMR profile in comparison with published trends in 2002 to 2006. Antimicrobial susceptibility testing of 261 N. gonorrhoeae isolates from consecutive patients between 2007 and 2012 was determined for penicillin, tetracycline, ciprofloxacin, spectinomycin, extended-spectrum cephalosporins (ceftriaxone, cefixime, cefpodoxime) and azithromycin by the disk diffusion technique and the Etest method. P value was determined using χ test for comparisons of trends between the 2 periods. In comparison of AMR trends between 2002-2006 and 2007-2012, penicillinase-producing N. gonorrhoeae, tetracycline-resistant N. gonorrhoeae, and ciprofloxacin-resistant strains increased significantly from 21.2% to 47.9% (P 0.05) in decreased susceptibility to ceftriaxone and 0.8% to 1.5% (P > 0.05) for azithromycin resistance was observed. All isolates were susceptible to spectinomycin over both the periods, except for one isolate in 2002. The study highlights that there is a continuous increase in resistance to previously recommended antibiotics despite their disuse for treatment. The increase in number of strains with decreased susceptibility to extended-spectrum cephalosporins and azithromycin resistance, currently recommended for management of gonorrhea, is of serious concern. These trends should be monitored continuously to change antibiotic policy.

  12. Numerical analysis of internal solitary wave generation around a Island in Kuroshio Current using MITgcm.

    Science.gov (United States)

    Kodaira, Tsubasa; Waseda, Takuji

    2013-04-01

    We have conducted ADCP and CTD measurements from 31/8/2010 to 2/9/2010 at the Miyake Island, located approximately 180 km south of Tokyo. The Kuroshio Current approached the island in this period, and the PALSAR image showed parabolic bright line upstream of the island. This bright line may be a surface signature of large amplitude internal solitary wave. Although our measurements did not explicitly show evidence of the internal solitary wave, critical condition might have been satisfied because of the Kuroshio Current and strong seasonal thermocline. To discover the generation mechanism of the large amplitude internal solitary wave at the Miyake Island, we have conducted non-hydrostatic numerical simulation with the MITgcm. A simple box domain, with open boundaries at all sides, is used. The island is simplified to circular cylinder or Gaussian Bell whose radius is 3km at ocean surface level. The size of the domain is 40kmx40kmx500m for circular cylinder cases and 80kmx80kmx500m for Gaussian bell cases. By looking at our CTD data, we have chosen for initial and boundary conditions a tanh function for vertical temperature profile. Salinity was kept constant for simplicity. Vertical density profile is also described by tanh function because we adopt linear type of equation of state. Vertical velocity profile is constant or linearly changed with depth; the vertical mean speed corresponds to the linear phase speed of the first baroclinic mode obtained by solving the eigen-value problem. With these configurations, we have conducted two series of simulations: shear flow through cylinder and uniform flow going through Gaussian Bell topography. Internal solitary waves were generated in front of the cylinder for the first series of simulations with shear flow. The generated internal waves almost purely consisted of 1st baroclinic component. Their intensities were linearly related with upstream vertical shear strength. As the internal solitary wave became larger, its width

  13. Proteomic profiling of exosomes: Current perspectives

    DEFF Research Database (Denmark)

    Simpson, Richard J; Jensen, Søren S; Lim, Justin W E

    2008-01-01

    Exosomes are 40-100 nm membrane vesicles of endocytic origin secreted by most cell types in vitro. Recent studies have shown that exosomes are also found in vivo in body fluids such as blood, urine, amniotic fluid, malignant ascites, bronchoalveolar lavage fluid, synovial fluid, and breast milk...

  14. Lipid Profile

    Science.gov (United States)

    ... AACC products and services. Advertising & Sponsorship: Policy | Opportunities Lipid Profile Share this page: Was this page helpful? Also ... as: Lipid Panel; Coronary Risk Panel Formal name: Lipid Profile Related tests: Cholesterol ; HDL Cholesterol ; LDL Cholesterol ; Triglycerides ; ...

  15. Data Profiling

    OpenAIRE

    Hladíková, Radka

    2010-01-01

    Title: Data Profiling Author: Radka Hladíková Department: Department of Software Engineering Supervisor: Ing. Vladimír Kyjonka Supervisor's e-mail address: Abstract: This thesis puts mind on problems with data quality and data profiling. This Work analyses and summarizes problems of data quality, data defects, process of data quality, data quality assessment and data profiling. The main topic is data profiling as a process of researching data available in existing...

  16. Post-processing software for ADCP and OBS measured data and its application%ADCP和OBS测量数据处理软件及应用

    Institute of Scientific and Technical Information of China (English)

    吴尧; 陈建湘

    2014-01-01

    感潮河流受上游来水和下游潮流的共同影响,水文要素变化迅速,需要通过建立转换关系获得流量和泥沙数据,且数据量大,因此感潮河流在线水文资料的整编较为复杂。以深圳河在线水文泥沙观测资料为研究对象,研制了具有可视化、智能化和集成化的水文资料整编、审查等数据后处理支持软件。实现了不同类型在线监测设备监测资料的规范化整编,提高了感潮河段水文资料整编的精度。%A tidal river is co-influenced by upstream flow and tidal current and its hydrological factors vary quickly. In the data treatment, the hydrological factor relation should be established to obtain discharge and sediment data; in addition, due to large number of data, the hydrological data compilation for a tidal river is complicated. In the research for on-line hydrological observation data of Shenzhen River, the post-processing support software with functions of visualization, intellectualization and integration for compilation and check of hydrological data is developed. As a result, standardized compilation for measured data by different measurement equipment is realized and compilation accuracy of hydrological data of tidal river is improved.

  17. Profiling the Mobile Customer

    DEFF Research Database (Denmark)

    Jessen, Pernille Wegener; King, Nancy J.

    2010-01-01

    of significant concerns about privacy and data protection. This second article in a two part series on "Profiling the Mobile Customer" explores how to best protect consumers' privacy and personal data through available mechanisms that include industry self-regulation, privacy-enhancing technologies......Mobile customers are increasingly being tracked and profiled by behavioural advertisers to enhance delivery of personalized advertising. This type of profiling relies on automated processes that mine databases containing personally-identifying or anonymous consumer data, and it raises a host...... discusses the current limitations of using technology to protect consumers from privacy abuses related to profiling. Concluding that industry self-regulation and available privacy-enhancing technologies will not be adequate to close important privacy gaps related to consumer profiling without legislative...

  18. Karolinske psychodynamic profile (KAPP)

    DEFF Research Database (Denmark)

    Mathiesen, Birgit Bork; Søgaard, Ulf

    2006-01-01

    psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil......psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil...

  19. Effect of variable winds on current structure and Reynolds stresses in a tidal flow: analysis of experimental data in the eastern English Channel

    Directory of Open Access Journals (Sweden)

    K. A. Korotenko

    2012-11-01

    Full Text Available Wind and wave effects on tidal current structure and turbulence throughout the water column are examined using an upward-looking acoustic Doppler current profiler (ADCP. The instrument has been deployed on the seafloor of 18-m mean depth, off the north-eastern French coast in the eastern English Channel, over 12 tidal cycles, and covered the period of the transition from mean spring to neap tide, and forcing regimes varied from calm to moderate storm conditions. During storms, we observed gusty winds with magnitudes reaching 15 m s−1 and wave heights reaching up to 1.3 m. Analysis of velocity spectra revealed a noticeable contribution of wind-induced waves to spectral structure of velocity fluctuations within the subsurface layer. Near the surface, stormy winds and waves produced a significant intensification of velocity fluctuations, particularly when the sustained wind blew against the ebb tide flow. As during wavy periods, the variance-derived Reynolds stress estimates might include a wave-induced contamination, we applied the Variance Fit method to obtain unbiased stresses and other turbulent quantities. Over calm periods, the turbulent quantities usually decreased with height above the seabed. The stresses were found to vary regularly with the predominantly semidiurnal tidal flow. The along-shore stress being generally greater during the flood flow (~2.7 Pa than during the ebb flow (~−0.6 Pa. The turbulent kinetic energy production rate, P, and eddy viscosity, Az, followed a nearly regular cycle with close to a quarter-diurnal period. As for the stresses, near the seabed, we found the maximum values of estimated quantities of P and Az to be 0.1 Wm−3 and 0.5 m2 s−1, respectively, during the flood flow. Over the storm periods, we found the highest unbiased stress values (~−2.6 Pa during ebb when tidal currents were opposite to the

  20. Effect of variable winds on current structure and Reynolds stresses in a tidal flow: analysis of experimental data in the Eastern English Channel

    Directory of Open Access Journals (Sweden)

    K. A. Korotenko

    2012-06-01

    Full Text Available Wind and wave effects on tidal current structure and turbulence throughout the water column are examined using an upward-looking acoustic Doppler current profiler (ADCP. The instrument has been deployed on the seafloor of 20-m depth, off the North-Eastern French coast in the Eastern English Channel over 12 tidal cycles and covered the period of the transition from mean spring to neap tide and forcing regimes varied from calm to moderate storm conditions. During storms, we observed gusty winds with magnitude reached 15 m s−1 and wave height reached up to 1.3 m. Analysis of velocity spectra revealed a noticeable contribution of wind-induced waves to spectral structure of velocity fluctuations within the upper 10-m layer. Near the surface, stormy winds and waves produced a significant intensification of velocity fluctuations, particularly when the sustained wind blew against the ebb tide flow. As during wavy periods the variance-derived Reynolds stress estimates might include a wave-induced contamination, we applied the Variance Fit method to obtain unbiased stresses and other turbulent quantities. Over calm periods, the turbulent quantities usually decreased with height above the seabed. The stresses were found to vary regularly with the predominantly semidiurnal tidal flow, with the along-shore stress being generally greater during the flood flow (~2.7 Pa than during the ebb flow (~−0.6 Pa. The turbulent kinetic energy production rate, P, and eddy viscosity, Az}, followed a nearly regular cycle with close to a quarter-diurnal period. As for the stresses, near the seabed, we found the maximum values of estimated quantities of P and Az to be 0.1 W m−3 and 0.5 m2 s−1, respectively, during the flood flow. Over the storm periods, we found the highest stress values (~−2 Pa during ebb when tidal currents were opposite to the southwesterly winds while

  1. Leadership Profiles.

    Science.gov (United States)

    Morgan, Robert M.; And Others

    1992-01-01

    Presents profiles of three leaders in the field of educational media and technology: Robert Mills Gagne, Florida State University; Robert Heinich, Indiana University; and Charles Francis Schuller, University of Georgia. (SLW)

  2. Profiling cancer

    DEFF Research Database (Denmark)

    Ciro, Marco; Bracken, Adrian P; Helin, Kristian

    2003-01-01

    In the past couple of years, several very exciting studies have demonstrated the enormous power of gene-expression profiling for cancer classification and prediction of patient survival. In addition to promising a more accurate classification of cancer and therefore better treatment of patients......, gene-expression profiling can result in the identification of novel potential targets for cancer therapy and a better understanding of the molecular mechanisms leading to cancer....

  3. Profiling cancer

    DEFF Research Database (Denmark)

    Ciro, Marco; Bracken, Adrian P; Helin, Kristian

    2003-01-01

    In the past couple of years, several very exciting studies have demonstrated the enormous power of gene-expression profiling for cancer classification and prediction of patient survival. In addition to promising a more accurate classification of cancer and therefore better treatment of patients......, gene-expression profiling can result in the identification of novel potential targets for cancer therapy and a better understanding of the molecular mechanisms leading to cancer....

  4. Global electricity company profiles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    Global Electricity Company Profiles examines the operations and strategies of 60 of the leading electricity companies in the world. Through its analysis of the key players, the report provides a comprehensive review of the current state of the global electricity industry. Using electricity sales as its criteria, the most successful companies are compared in terms of their national, regional and global importance. Global Electricity Company Profiles provides an outline of each company, its structure and operations, as well as key financial data. The detailed performance benchmarking and review of expectations for future development for each individual company provide a wealth of invaluable strategic information not available elsewhere. (author)

  5. Turbulent current drive mechanisms

    Science.gov (United States)

    McDevitt, Christopher J.; Tang, Xian-Zhu; Guo, Zehua

    2017-08-01

    Mechanisms through which plasma microturbulence can drive a mean electron plasma current are derived. The efficiency through which these turbulent contributions can drive deviations from neoclassical predictions of the electron current profile is computed by employing a linearized Coulomb collision operator. It is found that a non-diffusive contribution to the electron momentum flux as well as an anomalous electron-ion momentum exchange term provide the most efficient means through which turbulence can modify the mean electron current for the cases considered. Such turbulent contributions appear as an effective EMF within Ohm's law and hence provide an ideal means for driving deviations from neoclassical predictions.

  6. Profile summary.

    Science.gov (United States)

    2003-01-01

    All drugs appearing in the Adis Profile Summary table have been selected based on information contained in R&D Insight trade mark, a proprietary product of Adis International. The information in the profiles is gathered from the world's medical and scientific literature, at international conferences and symposia, and directly from the developing companies themselves. The emphasis of Drugs in R&D is on the clinical potential of new drugs, and selection of agents for inclusion is based on products in late-phase clinical development that have recently had a significant change in status.

  7. Spin current

    CERN Document Server

    Valenzuela, Sergio O; Saitoh, Eiji; Kimura, Takashi

    2012-01-01

    In a new branch of physics and technology called spin-electronics or spintronics, the flow of electrical charge (usual current) as well as the flow of electron spin, the so-called 'spin current', are manipulated and controlled together. This book provides an introduction and guide to the new physics and application of spin current.

  8. Temperature profile and current meter data collected using current meter (PCM) from the CHAIN in the Northeast Atlantic Ocean (limit-40 W) as part of the International Decade of Ocean Exploration / Mid-Ocean Dynamics Experiment from 01 May 1973 to 01 June 1973 (NODC Accession 7600732)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, pressure, depth, east-west current component, and north-south current component data were collected using current meter (PCM) from the CHAIN in the...

  9. Diurnal variability of upper ocean temperature and heat budget in the southern Bay of Bengal during October-November, 1998 (BOBMEX-Pilot)

    Digital Repository Service at National Institute of Oceanography (India)

    Murty, V.S.N.; RameshBabu, V.; Rao, L.V.G.; Prabhu, C.V.; Tilvi, V.

    Time-series data on upper-ocean temperature, Vessel-Mounted Acoustic Doppler Current Profiler (VM-ADCP) measured currents and surface meteorological parameters have been obtained for the first time in the southern Bay of Bengal at 7°N, 10°N, and 13...

  10. Comment on: "The spatial extent of the Deep Western Boundary Current into the Bounty Trough: new evidence from parasound sub-bottom profiling" by Horn and Uenzelmann-Neben

    Science.gov (United States)

    Mitchell, Neil C.

    2016-12-01

    Horn and Uenzelmann-Neben (2016) have described computing power spectra from sediment profiler data collected over the Bounty Trough from which they inferred Milankovic cycles. Sediment profiler records are routinely acquired on research vessels, so the method presented is interesting if it can help to resolve different influences on sediment deposits from such data. A significant concern, however, is that attenuation dominates the amplitude variation in profiler data, distorting power spectra computed over the sediment age intervals of interest. In the case of the Bounty Trough data shown, attenuation appears to have strongly varied amplitudes over the depth range commensurate with the first 41 ky Milankovic cycle, so the article's result is less certain than claimed. Attenuation rates can vary spatially (both along track and with depth) so evaluating cycles will not be straightforward without ground truth from boreholes, which potentially diminishes the utility of remote-sensing data. Nevertheless, while not separating attenuation and reflectivity unequivocally, alternative displays of such data as explained below can help to suggest the relative importance of attenuation and reflectivity on amplitude variations.

  11. MPI Profiling

    Energy Technology Data Exchange (ETDEWEB)

    Han, D K; Jones, T R

    2005-02-11

    The Message Passing Interface (MPI) is the de facto message-passing standard for massively parallel programs. It is often the case that application performance is a crucial factor, especially for solving grand challenge problems. While there have been many studies on the scalability of applications, there have not been many focusing on the specific types of MPI calls being made and their impact on application performance. Using a profiling tool called mpiP, a large spectrum of parallel scientific applications were surveyed and their performance results analyzed.

  12. Quantum profiles

    CERN Document Server

    Bernstein, Jeremy

    1991-01-01

    For the prominent science writer Jeremy Bernstein, the profile is the most congenial way of communicating science. Here, in what he labels a "series of conversations carried on in the reader's behalf and my own," he evokes the tremendous intellectual excitement of the world of modern physics, especially the quantum revolution. Drawing on his well-known talent for explaining the most complex scientific ideas for the layperson, Bernstein gives us a lively sense of what the issues of quantum mechanics are and of various ways in which individual physicists approached them.The author begins this se

  13. Bottom boundary layer in south San Francisco Bay, California

    Science.gov (United States)

    Cheng, Ralph T.; Gartner, Jeffrey W.; Smith, Richard E.

    1997-01-01

    Detailed velocity distributions within the benthic turbulent boundary layer were measured by a Broad Band Acoustic Doppler Current Profiler (BB-ADCP) in South San Francisco Bay, California. In "mode 5", the BB-ADCP was able to measure velocity in 5 cm increments. The validation of these measurements was achieved by comparing the BB-ADCP measurements with the velocities measured by a Narrow Band Acoustic Doppler Current Profiler (NB-ADCP) in close proximity. There were thirty-three (33) velocity time-series measured by the BB-ADCP beginning at 7 cm above bed and extending to 175 cm in water column for about two weeks. The velocities from locations at 7 cm and 12 cm above the bed were determined to be of lower accuracy, and they were not used in estimates of friction velocity, u.. The values of u. at 95% confidence level were determined with relative error less than 20%. The time-series of u. varied with velocity outside of the boundary layer, and responded to spring-neap tidal variations. Attempts to use acoustic backscatterance echo intensity to measure suspended sediment concentration showed prom ise, and merit consideration in future studies.

  14. Current limiters

    Energy Technology Data Exchange (ETDEWEB)

    Loescher, D.H. [Sandia National Labs., Albuquerque, NM (United States). Systems Surety Assessment Dept.; Noren, K. [Univ. of Idaho, Moscow, ID (United States). Dept. of Electrical Engineering

    1996-09-01

    The current that flows between the electrical test equipment and the nuclear explosive must be limited to safe levels during electrical tests conducted on nuclear explosives at the DOE Pantex facility. The safest way to limit the current is to use batteries that can provide only acceptably low current into a short circuit; unfortunately this is not always possible. When it is not possible, current limiters, along with other design features, are used to limit the current. Three types of current limiters, the fuse blower, the resistor limiter, and the MOSFET-pass-transistor limiters, are used extensively in Pantex test equipment. Detailed failure mode and effects analyses were conducted on these limiters. Two other types of limiters were also analyzed. It was found that there is no best type of limiter that should be used in all applications. The fuse blower has advantages when many circuits must be monitored, a low insertion voltage drop is important, and size and weight must be kept low. However, this limiter has many failure modes that can lead to the loss of over current protection. The resistor limiter is simple and inexpensive, but is normally usable only on circuits for which the nominal current is less than a few tens of milliamperes. The MOSFET limiter can be used on high current circuits, but it has a number of single point failure modes that can lead to a loss of protective action. Because bad component placement or poor wire routing can defeat any limiter, placement and routing must be designed carefully and documented thoroughly.

  15. The Angola Current and its seasonal variability as observed at 11°S

    Science.gov (United States)

    Kopte, Robert; Brandt, Peter; Dengler, Marcus; Claus, Martin; Greatbatch, Richard J.

    2016-04-01

    The eastern boundary circulation off the coast of Angola has been described only sparsely to date. The region off Angola, which connects the equatorial Atlantic and the Angola-Benguela upwelling regime, is of particular interest to understand the relative importance of transient equatorial versus local forcing of the observed variability in the coastal upwelling region. For the first time multi-year velocity observations of the Angola Current at 11°S are available. From July 2013 to November 2015 a bottom shield equipped with an ADCP had been deployed at 500m water depth, accompanied by a mooring sitting on the 1200m-isobath with an ADCP being installed at 500m depth. Both upward-looking instruments measured the current speed up to about 50m below the sea surface. During the deployment period the Angola Current was characterized by a weak southward mean flow of 5-8 cm/s at 50m depth (slightly stronger at the in-shore mooring position), with the southward current penetrating down to about 200m depth. The alongshore velocity component reveals a pronounced seasonal variability. It is dominated by 120-day, semi-annual, and annual oscillations with distinct baroclinic structures. Here we apply a reduced gravity model of the tropical Atlantic for the first five baroclinic modes forced with interannually varying wind stress to investigate the seasonal variability along the equatorial and coastal waveguides. In the equatorial Atlantic the 120-day, semi-annual, and annual oscillations are associated with resonant basin modes of the 1st, 2nd, and 4th baroclinic mode, respectively. These basin modes are composed of equatorial Kelvin and Rossby waves as well as coastally trapped waves. The reduced gravity model is further used to study the respective role of the remote equatorial forcing, more specifically the influence of equatorial basin modes via coastally trapped waves, and the local forcing for the observed seasonal variability and associated baroclinic structure of the

  16. Advanced Multiple Aperture Seeing Profiler

    Science.gov (United States)

    Ren, Deqing; Zhao, Gang

    2016-10-01

    Measurements of the seeing profile of the atmospheric turbulence as a function of altitude are crucial for solar astronomical site characterization, as well as the optimized design and performance estimation of solar Multi-Conjugate Adaptive Optics (MCAO). Knowledge of the seeing distribution, up to 30 km, with a potential new solar observation site, is required for future solar MCAO developments. Current optical seeing profile measurement techniques are limited by the need to use a large facility solar telescope for such seeing profile measurements, which is a serious limitation on characterizing a site's seeing conditions in terms of the seeing profile. Based on our previous work, we propose a compact solar seeing profiler called the Advanced Multiple Aperture Seeing Profile (A-MASP). A-MASP consists of two small telescopes, each with a 100 mm aperture. The two small telescopes can be installed on a commercial computerized tripod to track solar granule structures for seeing profile measurement. A-MASP is extreme simple and portable, which makes it an ideal system to bring to a potential new site for seeing profile measurements.

  17. Towards the use of HYCOM in Coupled ENSO Prediction: Assessment of ENSO Skill in Forced Global HYCOM

    Science.gov (United States)

    2016-08-10

    are available. 2 2. Equatorial Pacific mean Conductivity-Temperature-Depth (CTD)/ Acoustic Doppler Current Profiler (ADCP) sections by Johnson et...temperature and salinity biases do not compensate in such as way that the pycnocline tilt matches that of Argo. A complete set of mean and RMS misfits were

  18. A combined use of acoustic and optical devices to investigate suspended sediment in rivers

    Science.gov (United States)

    Guerrero, Massimo; Rüther, Nils; Haun, Stefan; Baranya, Sandor

    2017-04-01

    The use of acoustic and optic devices has become more and more common for estimating suspended sediment loads in rivers. The echo intensity levels (EIL) recorded by means of an Acoustic Doppler Current Profiler (ADCP) have been applied in different methods, which provided relationships between scattering particles features derived from samples (i.e., concentration and grain size) and corresponding backscattering strength and sound attenuation. At the same time, the laser diffraction was applied by an in-stream sampler (LISST-SL) to measure suspended sediment concentration and the corresponding particle size distribution (PSD). These two techniques exhibited different limitations in terms of the measured range of concentration, sensitivity to a certain spectrum of particle sizes, and instruments deploy feasibility especially in large rivers, in a way that the use of sampled PSD by LISST-SL to validate ADCP methods may not be trivial. The aim of this study was to combine the vertical profiling of EIL by an ADCP with results from LISST-SL, eventually demonstrating the possibility of using moving ADCP measurements to detect different suspended matters along a Danube River section characterized by a small tributary junction. At the same time, this work elucidates optical to acoustic method deviations that hinders an actual validation of ADCP methods based on LISST-SL rather than with physical samplings.

  19. Current Titles

    Energy Technology Data Exchange (ETDEWEB)

    Various

    2006-06-01

    This booklet is published for those interested in current research being conducted at the National Center for Electron Microscopy. The NCEM is a DOE-designated national user facility and is available at no charge to qualified researchers. Access is controlled by an external steering committee. Interested researchers may contact Jane Cavlina, Administrator, at 510/486-6036.

  20. Evaluating the Invariance of Cognitive Profile Patterns Derived from Profile Analysis via Multidimensional Scaling (PAMS): A Bootstrapping Approach

    Science.gov (United States)

    Kim, Se-Kang

    2010-01-01

    The aim of the current study is to validate the invariance of major profile patterns derived from multidimensional scaling (MDS) by bootstrapping. Profile Analysis via Multidimensional Scaling (PAMS) was employed to obtain profiles and bootstrapping was used to construct the sampling distributions of the profile coordinates and the empirical…

  1. Frontal and Profile Photographs, the “Truth” and the Memory. From the Beagle Etchings (1839 and the Anthropological Photography (by the End of the 19th Century to the Current Identification Photos

    Directory of Open Access Journals (Sweden)

    Marta Penhos

    2013-07-01

    Full Text Available The article proposes an analysis of front and profile typologies from the 19th century to these days. From a reflection on the photographic image and its relationship with truth and memory, a three stages review is outlined taking into account the official report of the so called Beagle journey and the etchings that illustrate it (1826-1836, the photographs taken to the Patagonian indigenous groups who were defeated after the military campaigns started in 1879 in Argentina as well as some cases of artists and human rights activists who appropriated the typology in the last 30 years. In the etchings and photographs, a tension between the romanticism conception and a positivistic point of view is evidenced. On the one hand, the indian transformation through a civilizatory education contrasted, on the other hand, with the objectivation of the indigenous bodies entrusted to scientific inquiry. On their behalf, the contemporary cases pose a shift in the interpretation of the representation in the construction of a historical memory: the posthumous nature of photography getting along with another dimension linked to its capacity of giving a renewed existence to the dead and ensuring a transcendence that defies forgetfulness.

  2. Microstructure, CTD and ADCP data collected from R/V ONRUST in Hudson River Estuary during 6 short cruises from 1994-05-19 to 2001-05-01 (NCEI Accession 0146260)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Observations of turbulent mixing, stratification and currents in the Hudson River Estuary made in 6 short cruises in 1994/1995 and 2001 were assembled. The lower...

  3. Cohort profile

    DEFF Research Database (Denmark)

    Tollånes, Mette C; Strandberg-Larsen, Katrine; Forthun, Ingeborg

    2016-01-01

    PURPOSE: The purpose of MOthers and BAbies in Norway and Denmark cerebral palsy (MOBAND-CP) was to study CP aetiology in a prospective design. PARTICIPANTS: MOBAND-CP is a cohort of more than 210 000 children, created as a collaboration between the world's two largest pregnancy cohorts-the Norweg......PURPOSE: The purpose of MOthers and BAbies in Norway and Denmark cerebral palsy (MOBAND-CP) was to study CP aetiology in a prospective design. PARTICIPANTS: MOBAND-CP is a cohort of more than 210 000 children, created as a collaboration between the world's two largest pregnancy cohorts...... investigating various hypotheses regarding CP aetiology are currently on-going. FUTURE PLANS: Additional data can be harmonised as necessary to meet requirements of new projects. Biological specimens collected during pregnancy and at delivery are potentially available for assay, as are results from assays...

  4. Computation and error analysis of discharge for the Lake Michigan Diversion Project in Illinois: 1997-99 water years

    Science.gov (United States)

    Duncker, James J.; Over, Thomas M.; Gonzalez, Juan A.

    2006-01-01

    Acoustic velocity meters (AVM's) and acoustic Doppler current profilers (ADCP's) were used to measure streamflow at four streamflow-gaging stations in the Chicago River system. The streamflow data were used to compute discharge and to determine the uncertainty in the computed annual mean discharge at each station for the Lake Michigan Diversion Project in Illinois. Descriptions of the instrumentation at each station, stage-area and index-velocity ratings, and methods utilized for computing discharge and estimating missing record are given. Daily mean and annual mean discharges were computed for each station for 1997-99 water years (WY's). A water year is defined as the 12-month period from October 1 through September 30. The water year is designated by the calender year in which it ends and which includes 9 of the 12 months. Thus, the year ending September 30, 1999, is called the 1999 water year. A first-order error analysis was applied to acoustic velocity meter (AVM) data, stage-area, and index-velocity ratings at each streamflow-gaging station. The error analysis results indicate that the uncertainty is sensitive to the value of uncertainty associated with acoustic Doppler cur-rent profiler (ADCP) discharge measurement data. At the Chicago River at Columbus Drive at Chicago, Illinois station for the 1997-99 WY's, the uncertainty, expressed as a standard deviation of the average annual discharge, ranged from 13 to 18 cubic feet per second (ft3/s) when ADCP uncertainty was not included, whereas total uncertainty ranged from 55 to 69 ft3/s when ADCP uncertainty was included. At the Chicago Sanitary and Ship Canal at Romeoville, Illinois station for the 1997-99 WY's, the uncertainty ranged from 18 to 20 ft3/s when ADCP uncertainty was not included, whereas it ranged from 64 to 68 ft3/s when it was included. At the Calumet River below O'Brien Lock and Dam at Chicago, Illinois station for the 1997-99 WY's, the uncertainty ranged from 13 to 22 ft3/s when ADCP

  5. Current titles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    This booklet is published for those interested in current research being conducted at the National Center for Electron Microscopy. The NCEM is a DOE-designated national user facility and is available at no charge to qualified researchers. Access is controlled by an external steering committee. Interested researchers may contact Gretchen Hermes at (510) 486-5006 or address below for a User`s Guide. Copies of available papers can be ordered from: Theda Crawford National Center for Electron Microscopy, Lawrence Berkeley Laboratory, One Cyclotron Rd., MS72, Berkeley, California, USA 94720.

  6. Are South African Speech-Language Therapists adequately equipped to assess English Additional Language (EAL) speakers who are from an indigenous linguistic and cultural background? A profile and exploration of the current situation.

    Science.gov (United States)

    Mdladlo, Thandeka; Flack, Penelope; Joubert, Robin

    2016-03-18

    This article presents the results of a survey conducted on Speech-Language Therapists (SLTs) regarding current practices in the assessment of English Additional Language (EAL) speakers in South Africa. It forms part of the rationale for a broader (PhD) study that critiques the use of assessment instruments on EAL speakers from an indigenous linguistic and cultural background. This article discusses an aspect of the broader research and presents the background, method, findings, discussion and implications of the survey. The results of this survey highlight the challenges of human and material resources to, and the dominance of English in, the profession in South Africa. The findings contribute to understanding critical factors for acquiring reliable and valid assessment results with diverse populations, particularly the implications from a cultural and linguistic perspective.

  7. 创新当前大学生思想政治教育的评估方式%Innovative Evaluation Profile of the Current Ideological and Political Education

    Institute of Scientific and Technical Information of China (English)

    石雷雷

    2012-01-01

    我国高校现有的思想政治教育评估方式较为单一,已经无法满足新时期下大学生的性格特征和心理需求。本次研究在总结当前传统评估方式的基础上,结合自身经验探索出创新大学生思想政治教育评估方式的具体措施和注重要点。%The universities ideological and political education assessment has been unable to meet the character and psychological needs of the students in the new period.Specific measures for the study on the basis of summing up the current traditional assessment methods,combined with their own experience to explore innovation ideological and political education assessment methods and focus on the main points.

  8. Current ornithology

    CERN Document Server

    1983-01-01

    The appearance of the first volume of a projected series is the occasion for comment on scope, aims, and genesis of the work. The scope of Current Ornithology is all of the biology of birds. Ornithology, as a whole-organism science, is concerned with birds at every level of bi­ ological organization, from the molecular to the community, at least from the Jurassic to the present time, and over every scholarly discipline in which bird biology is done; to say this is merely to expand a dic­ tionary definition of "ornithology. " The aim of the work, to be realized over several volumes, is to present reviews or position statements con­ cerning the active fields of ornithological research. The reviews will be relatively short, and often will be done from the viewpoint of a readily­ identified group or school. Such a work could have come into being at any time within the past fifty years, but that Current Ornithology appears now is a result of events that are only seven to eight years old. One important event wa...

  9. Fetal Biophysical Profile Scoring

    Directory of Open Access Journals (Sweden)

    H.R. HaghighatKhah

    2009-01-01

    Full Text Available   "nFetal biophysical profile scoring is a sonographic-based method of fetal assessment first described by Manning and Platt in 1980. "nThe biophysical profile score was developed as a method to integrate real-time observations of the fetus and his/her intrauterine environment in order to more comprehensively assess the fetal condition. These findings must be evaluated in the context of maternal/fetal history (i.e., chronic hypertension, post-dates, intrauterine growth restriction, etc, fetal structural integrity (presence or absence of congenital anomalies, and the functionality of fetal support structures (placental and umbilical cord. For example, acute asphyxia due to placental abruption may result in an absence of the acute variables of the biophysical profile score (fetal breathing movements, fetal movement, fetal tone, and fetal heart rate reactivity with a normal amniotic fluid volume. With post maturity the asphyxial event may be intermittent and chronic resulting in a decrease in amniotic fluid volume, but with the acute variables remaining normal. "nWhile the 5 components of the biophysical profile score have remained unchanged since 1980 (Manning, 1980, the definitions of a normal and abnormal parameter have evolved with increasing experience. "nIn 1984 the definition of oligohydramnios was increased from < 1cm pocket of fluid to < 2.0 x 1.0 cm pocket. Oligohydramnios is now defined as a pocket of amniotic fluid < 2.0 x 2.0 cm (Manning, 1995a "nIf the four ultrasound variables are normal, the accuracy of the biophysical profile score was not found to be significantly improved by adding the non-stress test. As a result, in 1987 the profile score was modified to incorporate the non-stress test only when one of the ultrasound variables was abnormal (Manning 1987. Table 1 outlines the current definitions for quantifying a variable as present or absent. "nEach of the 5 components of the biophysical profile score does not have equal

  10. Wind influence on surface current variability in the Ibiza Channel from HF Radar

    Science.gov (United States)

    Lana, Arancha; Marmain, Julien; Fernández, Vicente; Tintoré, Joaquin; Orfila, Alejandro

    2016-04-01

    Surface current variability is investigated using 2.5 years of continuous velocity measurements from an high frequency radar (HFR) located in the Ibiza Channel (Western Mediterranean Sea). The Ibiza Channel is identified as a key geographical feature for the exchange of water masses but still poorly documented. Operational, quality controlled, HFR derived velocities are provided by the Balearic Islands Coastal Observing and Forecasting System (SOCIB). They are assessed by performing statistical comparisons with current-meter, ADCP, and surface lagrangian drifters. HFR system does not show significant bias, and its accuracy is in accordance with previous studies performed in other areas. The main surface circulation patterns are deduced from an EOF analysis. The first three modes represent almost 70 % of the total variability. A cross-correlation analysis between zonal and meridional wind components and the temporal amplitudes of the first three modes reveal that the first two modes are mainly driven by local winds, with immediate effects of wind forcing and veering following Ekman effect. The first mode (37 % of total variability) is the response of meridional wind while the second mode (24 % of total variability) is linked primarily with zonal winds. The third and higher order modes are related to mesoscale circulation features. HFR derived surface transport presents a markedly seasonal variability being mostly southwards. Its comparison with Ekman-induced transport shows that wind contribution to the total surface transport is on average around 65 %.

  11. Along-shelf current variability on the Catalan inner-shelf (NW Mediterranean)

    Science.gov (United States)

    Grifoll, Manel; Aretxabaleta, Alfredo L.; Espino, Manuel; Warner, John C.

    2012-01-01

    We examine the circulation over the inner shelf of the Catalan Sea using observations of currents obtained from three ADCPs within the inner-shelf (24 and 50 m depth) during March-April 2011. The along-shelf current fluctuations during that period are mainly controlled by the local wind stress on short time scales and by remote pressure gradients on synoptic time scales. Different forcing mechanisms are involved in the along-shelf momentum balance. During storm conditions, wind stress, sea level gradients and the non-linear terms dominate the balance. During weak wind conditions, the momentum balance is controlled by the pressure gradient, while during periods of moderate wind in the presence of considerable stratification, the balance is established between the Coriolis and wind stress terms. Vertical variations of velocity are affected by the strong observed density gradient. The increased vertical shear is accompanied by the development of stratified conditions due to local heating when the wind is not able to counteract (and destroy) stratification. The occasional influence of the Besòs river plume is observed in time scales of hours to days in a limited area in front of Barcelona. The area affected by the plume depends on the vertical extend of the fresher layer, the fast river discharge peak, and the relaxation of cross-shore velocities after northeast storm events. This contribution provides a first interpretation of the inner-shelf dynamics in the Catalan Sea.

  12. Deflagration Wave Profiles

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Laboratory

    2012-04-03

    Shock initiation in a plastic-bonded explosives (PBX) is due to hot spots. Current reactive burn models are based, at least heuristically, on the ignition and growth concept. The ignition phase occurs when a small localized region of high temperature (or hot spot) burns on a fast time scale. This is followed by a growth phase in which a reactive front spreads out from the hot spot. Propagating reactive fronts are deflagration waves. A key question is the deflagration speed in a PBX compressed and heated by a shock wave that generated the hot spot. Here, the ODEs for a steady deflagration wave profile in a compressible fluid are derived, along with the needed thermodynamic quantities of realistic equations of state corresponding to the reactants and products of a PBX. The properties of the wave profile equations are analyzed and an algorithm is derived for computing the deflagration speed. As an illustrative example, the algorithm is applied to compute the deflagration speed in shock compressed PBX 9501 as a function of shock pressure. The calculated deflagration speed, even at the CJ pressure, is low compared to the detonation speed. The implication of this are briefly discussed.

  13. Towards Selective Tidal-Stream Transport for Lagrangian profilers

    DEFF Research Database (Denmark)

    Jouffroy, Jerome; Zhou, Qiuyang; Zielinski, Oliver

    2011-01-01

    Autonomous Lagrangian profilers are widely used as measurement and monitoring platforms. In their current mode of operation, the profilers usually drift passively at their parking depth before making a vertical profile to go back to the surface. This paper presents a control strategy to actively...

  14. Towards Selective Tidal-Stream Transport for Lagrangian profilers

    DEFF Research Database (Denmark)

    Jouffroy, Jerome; Zhou, Qiuyang; Zielinski, Oliver

    2011-01-01

    select and use tidal currents so that a profiler can autonomously reach a desired destination. After presenting the profiler and possible modifications for a coastal environment, we introduce simple mathematical models for the profiler and its environment. We then present a feedback controller that...

  15. The Goddard Profiling Algorithm (GPROF): Description and Current Applications

    Science.gov (United States)

    Olson, William S.; Yang, Song; Stout, John E.; Grecu, Mircea

    2004-01-01

    Atmospheric scientists use different methods for interpreting satellite data. In the early days of satellite meteorology, the analysis of cloud pictures from satellites was primarily subjective. As computer technology improved, satellite pictures could be processed digitally, and mathematical algorithms were developed and applied to the digital images in different wavelength bands to extract information about the atmosphere in an objective way. The kind of mathematical algorithm one applies to satellite data may depend on the complexity of the physical processes that lead to the observed image, and how much information is contained in the satellite images both spatially and at different wavelengths. Imagery from satellite-borne passive microwave radiometers has limited horizontal resolution, and the observed microwave radiances are the result of complex physical processes that are not easily modeled. For this reason, a type of algorithm called a Bayesian estimation method is utilized to interpret passive microwave imagery in an objective, yet computationally efficient manner.

  16. Observations on the Current Bacteriological Profile of Chronic ...

    African Journals Online (AJOL)

    Keywords: Bilateral, Chronic, Culture and sensitivity, Otitis Media, Pseudomonas ... The Statistical Package for Social Sciences (SPSS Inc.,. Chicago, IL, USA) version 16 was used for analysis. Chi‑square test was used to test the statistical significance of .... study is limited by using retrospective design especially in.

  17. Underway Doppler current profiles in the Gulf of California

    Science.gov (United States)

    Badan-Dangon, Antoine; Lavin, Miguel F.; Hendershott, Myrl C.

    The circulation of the Gulf of California has long been of scientific interest. The first hydrographic expedition there was in 1889 [Roden and Groves, 1959], followed half a century later by Sverdrup's cruise on the R/V E.W. Scripps [Suerdrup, 1941] in February and March of 1939. Since then, the Gulfs circulation has been the subject of active research [Alvarez-Boirego, 1983]. During the 1980s, scientists at CICESE and at the Scripps Institution of Oceanography designed a cooperative effort, the Pichicuco project, to investigate some of the notable physical oceanographic features of the Gulf.The Gulf of California is a marginal sea close to 1500 km long and about 200 km wide, oriented northwest to southeast, between the peninsula of Baja California and western continental Mexico. It consists of a succession of basins that shoal progressively from about 3500 m at the mouth, where the Gulf connects with the Pacific Ocean, to just over 2000 m in the central Guaymas Basin. In contrast, the far northern Gulf is a continental shelf sea whose depth exceeds 200 m only in a few small basins. The Gulf's circulation is profoundly influenced by processes taking place at the narrows that connect Guaymas Basin to the northern Gulf between 28°N and 29°N (see Figure 1). These are a sequence of channels, each about 15 km wide, between San Lorenzo, San Esteban, and Tiburón islands, which reduce the effective cross section of the Gulf to about 2.25×106m2. The westernmost connection, close to Baja California, is the Ballenas-Salsipuedes (hereafter Ballenas) channel, whose depth exceeds 1600 m in its central part. It is bounded partially to the north by a lateral constriction with a maximum depth of 600 m, near the northern extreme of Angel de la Guarda island, and to the east by a ridge from which rise Angel de la Guarda, San Lorenzo, and other smaller islands. This ridge extends underwater about 20 km to the southeast from San Lorenzo into Guaymas Basin, where it forms the eastern wall of San Lorenzo sill, the southern end of Ballenas channel. A narrow canyon on this sill has a maximum depth of about 430 m. The central San Esteban channel is located between San Lorenzo and San Esteban islands, and is the deepest and widest of the three. It possesses a single, rather broad sill, formed by a westward underwater extension of San Esteban island. The third channel, between San Esteban and Tiburon islands, is narrower than the first two, has a broad sill at about 300 m depth, and connects the extension of the Sonoran shelf with the deeper basin to the north. Little studied before, it now appears to play a significant role in the regional exchange of water. A fourth, narrow channel between Tiburon island and mainland Mexico is too shallow to participate strongly in the circulation.

  18. Social networks user: current research

    Directory of Open Access Journals (Sweden)

    Agadullina E.R.

    2015-12-01

    Full Text Available The purpose of this article is to review current research studies focusing on the users of Facebook and their behaviors in social networks. This review is organized into two sections: 1 social-demographic characteristics (Age, Gender, Nationality; 2 personality characteristics (Neuroticism, Extraversion, Openness-to-Experience, Agreeableness, Conscientiousness, Narcissism, Self-esteem. The results showed that the information in the personal profile and online behavior are strongly connected with socio-demographic and personality characteristics

  19. HOPWA Performance Profiles

    Data.gov (United States)

    Department of Housing and Urban Development — HOPWA Performance Profiles are generated quarterly for all agencies receiving HOPWA formula or competitive grants. Performance Profiles are available at the national...

  20. GHGRP Industrial Profiles

    Science.gov (United States)

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. These profiles contain detailed analyses. This page hosts data highlights for all sectors.

  1. Microwave Radiometer Profiler

    Data.gov (United States)

    Oak Ridge National Laboratory — The microwave radiometer profiler (MWRP) provides vertical profiles of temperature, humidity, and cloud liquid water content as a function of height or pressure at...

  2. Optimal Current Transfer in Dendrites

    Science.gov (United States)

    Bird, Alex D.

    2016-01-01

    Integration of synaptic currents across an extensive dendritic tree is a prerequisite for computation in the brain. Dendritic tapering away from the soma has been suggested to both equalise contributions from synapses at different locations and maximise the current transfer to the soma. To find out how this is achieved precisely, an analytical solution for the current transfer in dendrites with arbitrary taper is required. We derive here an asymptotic approximation that accurately matches results from numerical simulations. From this we then determine the diameter profile that maximises the current transfer to the soma. We find a simple quadratic form that matches diameters obtained experimentally, indicating a fundamental architectural principle of the brain that links dendritic diameters to signal transmission. PMID:27145441

  3. Acoustic imaging of the passage of turbidity currents and associated hydraulic jumps on underlying cyclic step bedforms. Squamish, BC

    Science.gov (United States)

    Hughes Clarke, J. E.

    2013-12-01

    Active channelized turbidity currents have been repeatedly imaged in 60m of water on the Squamish prodelta. Previously in 2011 and 2012, the prodelta has been repetitively surveyed on daily and hourly timescales and is thus known to exhibit trains of bedforms along the channel floors that resemble cyclic steps that migrate upslope intermittently. Beyond the channel mouths, clear turbidity current flows had previously been detected using a seabed mounted ADCP. In order to directly observe the passage of the flow in the channelized section of the prodelta, in June 2013 a vessel was moored using 4 anchors directly above one of the channels. The vessel operated two hull-mounted single beam sonars at 28 and 200 kHz and a multibeam sonar at 95 kHz, all imaging a near stationary point or swath within or across the channel. In addition a 1200 kHz ADCP was suspended 12m above the seabed and two 500 kHz imaging multibeams were suspended 10m above the channel floor. One of the suspended multibeams was oriented facing upslope examining a 150m range, 120 degree, plan view sector of the channel. The second suspended multibeam was oriented downward to derive a ~30m long along-track section over the length of one of the bedforms. A mechanically dipped CTD and optical backscatter probe was lower repeatedly directly into the active flows until it touched the seabed at about one minute periods. Over a period of 5 days, between 1 and 7 discrete flows per day were monitored passing by within one hour of low water. Their head velocities ranged from ~ 0.5 to 2.5m/s and their thicknesses were generally in the 3-5m range. Looking upstream in plan view, the lobate head of the approaching flows could be seen to be constricted to specific talwegs within the channel floor and rise up and over successive cyclic step bedforms. The higher velocity flows exhibit clear turbulent eddies on their upper surface. The duration of the high velocity component of the flow rarely lasted for more than a few

  4. ITER (International Thermonuclear Experimental Reactor) current drive and heating physics

    Energy Technology Data Exchange (ETDEWEB)

    Nevins, W.M.; Lindquist, W. (Lawrence Livermore National Lab., CA (USA)); Fujisawa, N.; Kimura, H. (Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan)); Hopman, H.; Rebuffi, L.; Wegrowe, J.G. (Max-Planck-Institut fuer Plasmaphysik, Garching (Germany, F.R.). NET Design Team); Parail, V.; Vdovin, V. (Gosudarstvennyj Komitet po Ispol' zovaniyu Atomnoj Ehnergii SSSR, Moscow (USSR). Inst. Atomnoj Ehn

    1990-01-01

    The ITER Current Drive and Heating (CD H) systems are required for: Ionization and current initiation; Non-inductive current ramp-up assist; Heating of the plasma; Steady-state operation with full non-inductive current drive; Current profile control; and Burn control by modulation of the auxiliary power. Steady-state current drive is the most demanding requirement, so this has driven the choice of the ITER current drive and heating systems.

  5. Renewable Energy Country Profiles. Caribbean

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-15

    IRENA Renewable Energy Country Profiles take stock of the latest developments in the field of renewables at country level around the world. Each profile combines analysis by IRENA's specialists with the latest available country data and additional information from a wide array of sources. The resulting reports provide a brief yet comprehensive picture of the situation with regard to renewable energy, including energy supply, electrical generation and grid capacity, and access. Energy policies, targets and projects are also considered, along with each country's investment climate and endowment with renewable energy resources. The energy statistics presented here span the period from 2009 until 2012, reflecting varying timelines in the source material. Since data availability differs from country to country, wider regional comparisons are possible only for the latest year with figures available for every country included. Despite the time lag in some cases, the evident differences and disparities between countries and regions around the world remain striking. The current package of country profiles is just a starting point. The geographic scope will continue to expand, and existing profiles will be enhanced with new indicators, with the whole series maintained as a live product on the IRENA website (www.irena.org)

  6. Parametric dependencies of JET electron temperature profiles

    Energy Technology Data Exchange (ETDEWEB)

    Schunke, B. [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking; Imre, K.; Riedel, K. [New York Univ., NY (United States)

    1994-07-01

    The JET Ohmic, L-Mode and H-Mode electron temperature profiles obtained from the LIDAR Thomson Scattering Diagnostic are parameterized in terms of the normalized flux parameter and a set of the engineering parameters like plasma current, toroidal field, line averages electron density... It is shown that the electron temperature profiles fit a log-additive model well. It is intended to use the same model to predict the profile shape for D-T discharges in JET and in ITER. 2 refs., 5 figs.

  7. A Profile for Safety Critical Java

    DEFF Research Database (Denmark)

    Schoeberl, Martin; Søndergaard, Hans; Thomsen, Bent

    2007-01-01

    We propose a new, minimal specification for real-time Java for safety critical applications. The intention is to provide a profile that supports programming of applications that can be validated against safety critical standards such as DO-178B [15]. The proposed profile is in line with the Java...... specification request JSR-302: Safety Critical Java Technology, which is still under discussion. In contrast to the current direction of the expert group for the JSR-302 we do not subset the rather complex Real-Time Specification for Java (RTSJ). Nevertheless, our profile can be implemented on top of an RTSJ...

  8. Bathymetric survey of the Brandon Road Dam Spillway, Joliet, Illinois

    Science.gov (United States)

    Engel, Frank; Krahulik, Justin

    2016-01-01

    Bathymetric survey data of the Brandon Road Dam spillway was collected on May 27 and May 28, 2015 by the US Geological Survey (USGS) using Trimble Real-Time Kinematic Global Positioning System (RTK-GPS) equipment. The base station was set up over a temporarily installed survey pin on both days. This pin was surveyed into an existing NGS benchmark (PID: BBCN12) within the Brandon Road Lock property. In wadeable sections, a GPS rover with 2.0 meter range pole and flat-foot was deployed. In sections unable to be waded, a 2.0 meter range pole was fix-mounted to a jon boat, and a boat-mounted Acoustic Doppler Current Profiler (ADCP) was used to collect the depth data. ADCP depth data were reviewed in the WinRiver II software and exported for processing with the Velocity Mapping Toolbox (Parsons and others, 2013). The RTK-GPS survey points of the water surface elevations were used to convert ADCP-measured depths into bed elevations. An InSitu Level Troll collected 1-minute water level data throughout the two day survey. These data were used to verify that a flat-pool assumption was reasonable for the conversion of the ADCP data to bed elevations given the measurement precision of the ADCP. An OPUS solution was acquired for each survey day.Parsons, D. R., Jackson, P. R., Czuba, J. A., Engel, F. L., Rhoads, B. L., Oberg, K. A., Best, J. L., Mueller, D. S., Johnson, K. K. and Riley, J. D. (2013), Velocity Mapping Toolbox (VMT): a processing and visualization suite for moving-vessel ADCP measurements. Earth Surf. Process. Landforms, 38: 1244–1260. doi: 10.1002/esp.3367

  9. Compilation of ocean circulation and other data from ADCP current meters, CTD casts, tidal gauges, and other instruments from a World-Wide distribution by Oregon State University and other institutions as part of World Ocean Circulation Experiment (WOCE) and other projects from 24 November 1985 to 30 December 2000 (NODC Accession 0000649)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Compilation of ocean circulation and other data were collected from a World-Wide distribution by Oregon State University (OSU) and other institutions as part of...

  10. Extremal periodic wave profiles

    Directory of Open Access Journals (Sweden)

    E. van Groesen

    2007-01-01

    Full Text Available As a contribution to deterministic investigations into extreme fluid surface waves, in this paper wave profiles of prescribed period that have maximal crest height will be investigated. As constraints the values of the momentum and energy integrals are used in a simplified description with the KdV model. The result is that at the boundary of the feasible region in the momentum-energy plane, the only possible profiles are the well known cnoidal wave profiles. Inside the feasible region the extremal profiles of maximal crest height are "cornered" cnoidal profiles: cnoidal profiles of larger period, cut-off and periodically continued with the prescribed period so that at the maximal crest height a corner results.

  11. Vertical Structure of Baroclinic Currents over Northern South China Sea Continental Slope

    Institute of Scientific and Technical Information of China (English)

    邱章

    2001-01-01

    The 28.6 d time series of ADCP currents at 27 depth levels, (11,15,…,115m) which are obtained from a mooring station at the northern South China Sea continental slope, have been decomposed into barotropic and baroclinic components. The emphasis in this paper is on the analysis of the time series of baroclinic currents by means of several methods,such as the tidal harmonic analysis, the power spectra and the kinetic energy estimation.The major results are as follows: (1) In respect of the baroclinic currents, the values of several parameters first decrease and then increase with depth. These parameters include the temporal mean value of the cross-shelf component, the standard deviations, the amplitudes of K1 constituents, the mean eddy kinetic energy, as well as the significant peaks of the power spectra of the cross-shelf components. (2) The diurnal period of the baroclinic currents is dominant. The diumal tidal current rotates clockwise and the major axis of current ellipse is located along the directions of NW-SE. The vertical distribution of the phases of the diurnal constituent varies with the different water layers. Around the 67m depth level, the phase changes very much.At those layers far away from the 67m depth level, the vertical distribution of the phase is relatively stable, but with opposite phases in the upper and lower water layers. For the upper layers between the surface and 67m,the phases are around 300°; for the lower layers between 67m and 115m, the phases are around 120° .(3) The mean eddy kinetic energy of the baroclinic current is quite large, accounting for 41% of the mean kinetic energy of the measured currents. The cross-shelf component is larger than the along-shelf one. The two baroclinic current components correspond to the major and minor axes of the current ellipse of the diurnal constituent respectively. (4) The power spectra of the baroclinic currents show a singnificant period of about 24h, with 23.6h at both 19m and 99m and 24

  12. Osteomyelitis: a current challenge

    Directory of Open Access Journals (Sweden)

    Luciana Souza Jorge

    2010-06-01

    Full Text Available Over the last 30 years, the pathogenesis of osteomyelitis has almost been totally elucidated, and many factors responsible for the persistence of this infection have been identified. Numerous antimicrobial agents with distinct spectrums of action, pharmacokinetics, and pharmacodynamics have been used in its treatment. Surgical techniques, including muscle grafts, the Ilizarov technique, and antibiotic bone cements, have been applied. However, bone infections are still a challenge. Despite the importance of isolation and identification of microorganisms to determine the antimicrobial treatment of bone infections, there are few systematic national studies about the etiological profile of these diseases. This article describes the current knowledge of osteomyelitis and summarizes published national data based on the experience of different Orthopedic and Traumatology Services. In general, S. aureus was described as an important etiological agent; however, the difference in design of national studies makes a comparison between the prevalence of bone infection, the associated risk factors, and the different therapeutic approaches difficult. In conclusion, effort is necessary in order to stimulate systematic national studies in different Orthopedics and Traumatology Services to obtain a better consensus on preventive measures and therapies of bone infections.

  13. Ethnosocial profile of Tuvans

    Directory of Open Access Journals (Sweden)

    Valeriya S. Kan

    2016-06-01

    Full Text Available The article examines the ethnosocial profile of contemporary Tuvans, with a focus on the dynamics of population change, human environment, self-consciousness, interethnic relations and language command. Our study was based on the official data of the Federal Census and the current statistics we obtained from Tuva territorial branch of the Federal State Statistics Service, as well as on the outcomes of the opinion polls held by a team lead by the author in 2008-2015. Due to traditionally high birth rate, the Tuvan population of Russia continues to grow (243422 in 2002, 263934 in 2010. This is also true for their share in the total population of Russia (0.17% in 2002, 0.19% in 2010. The main features of Tuvan human environment are their compact settlement within the Republic of Tuva (249299, or 95% of overall population, as well as living largely in a monoethnic environment, low level of ethnocultural and linguistic diversity and prevalence of rural population. The share of indigenous population in the region has been steadily increasing (64% in 1989, 77% in 2002, 82% in 2002, while those of other groups have been decreasing over time. The net migration remains negative due to ethnic Russians leaving the socially and economically dysfunctional region. Tuvans account for 92% of rural population, and 73% of the urban. The rural-urban balance in Tuva is shifting towards the latter slower than in the national average. Interethnic relations in the region can be described as stable, with a slight degree of tension. Problems mainly happen on the level of day-to-day communication. The sub-ethnicity of Tojin Tuvans is decreasing in numbers (4435 people in 2002, and 1856 in 2010. We believe the reason lies in the change of self-consciousness which accompanied the complete abandonment of nomadic lifestyle. In the article, we also define and describe the factors which contribute to the reproduction of Tuvan ethnicity, including the policy of the regional

  14. USGIN ISO metadata profile

    Science.gov (United States)

    Richard, S. M.

    2011-12-01

    The USGIN project has drafted and is using a specification for use of ISO 19115/19/39 metadata, recommendations for simple metadata content, and a proposal for a URI scheme to identify resources using resolvable http URI's(see http://lab.usgin.org/usgin-profiles). The principal target use case is a catalog in which resources can be registered and described by data providers for discovery by users. We are currently using the ESRI Geoportal (Open Source), with configuration files for the USGIN profile. The metadata offered by the catalog must provide sufficient content to guide search engines to locate requested resources, to describe the resource content, provenance, and quality so users can determine if the resource will serve for intended usage, and finally to enable human users and sofware clients to obtain or access the resource. In order to achieve an operational federated catalog system, provisions in the ISO specification must be restricted and usage clarified to reduce the heterogeneity of 'standard' metadata and service implementations such that a single client can search against different catalogs, and the metadata returned by catalogs can be parsed reliably to locate required information. Usage of the complex ISO 19139 XML schema allows for a great deal of structured metadata content, but the heterogenity in approaches to content encoding has hampered development of sophisticated client software that can take advantage of the rich metadata; the lack of such clients in turn reduces motivation for metadata producers to produce content-rich metadata. If the only significant use of the detailed, structured metadata is to format into text for people to read, then the detailed information could be put in free text elements and be just as useful. In order for complex metadata encoding and content to be useful, there must be clear and unambiguous conventions on the encoding that are utilized by the community that wishes to take advantage of advanced metadata

  15. YOUNG ATHLETES' MOTIVATIONAL PROFILES

    Directory of Open Access Journals (Sweden)

    Juan Antonio Moreno Murcia

    2007-06-01

    Full Text Available The aim of this study was to examine the relationship between motivational characteristics and dispositional flow. In order to accomplish this goal, motivational profiles emerging from key constructs within Achievement Goal Theory and Self-Determination Theory were related to the dispositional flow measures. A sample of 413 young athletes (Age range 12 to 16 years completed the PMCSQ-2, POSQ, SMS and DFS measures. Cluster analysis results revealed three profiles: a "self-determined profile" characterised by higher scores on the task-involving climate perception and on the task orientation; a "non-self-determined profile", characterised by higher scores on ego-involving climate perception and ego orientation; and a "low self-determined and low non-self-determined profile" which had the lowest dispositional flow. No meaningful differences were found between the "self-determined profile" and the "non-self-determined profile" in dispositional flow. The "self-determined profile" was more commonly associated with females, athletes practising individual sports and those training more than three days a week. The "non-self-determined profile" was more customary of males and athletes practising team sports as well as those training just two or three days a week

  16. Spiking the expectancy profiles

    DEFF Research Database (Denmark)

    Hansen, Niels Chr.; Loui, Psyche; Vuust, Peter

    Melodic expectations have long been quantified using expectedness ratings. Motivated by statistical learning and sharper key profiles in musicians, we model musical learning as a process of reducing the relative entropy between listeners' prior expectancy profiles and probability distributions...... learning over varying timescales enables listeners to generate expectations with reduced entropy....

  17. Household electricity demand profiles

    DEFF Research Database (Denmark)

    Marszal, Anna Joanna; Heiselberg, Per Kvols; Larsen, Olena Kalyanova

    2016-01-01

    Highlights •A 1-min resolution household electricity load model is presented. •Model adapts a bottom-up approach with single appliance as the main building block. •Load profiles are used to analyse the flexibility potential of household appliances. •Load profiles can be applied in other domains, e...

  18. Reinforced aerodynamic profile

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to the prevention of deformations in an aerodynamic profile caused by lack of resistance to the bending moment forces that are created when such a profile is loaded in operation. More specifically, the invention relates to a reinforcing element inside an aerodynamic...

  19. Renewable Energy Country Profiles. Pacific

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-09-15

    The IRENA Renewable Energy Country Profiles take stock of the latest development of renewable energy in two regions where renewable energy can make a significant contribution to combat climate change and bring modern energy services to everyone: Africa and the Pacific. These two regions are presented separately in this volume and its sister publication. The country profiles combine elements of IRENA analysis with the latest information available from a vast array of sources in order to give a brief yet comprehensive and up-to-date picture of the situation of renewable energy that includes energy supply, electrical capacity, energy access, policies, targets, investment climate, projects and endowment in renewable energy resources. Because of the different timelines of these sources, data presented here refer to years between 2008 and 2012. Data availability also differs from country to country, which makes comparison with a wider regional group possible only for the year for which figures are available for all the members of the group; while this may not be the most recent year, the differences between countries, regions and the world remain striking. The current country profiles are just a starting point; they will be extended upon with new indicators to make them more informative, and maintained as a live product on the IRENA website as a key source of information on renewable energy.

  20. Renewable Energy Country Profiles. Africa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-02-15

    The IRENA Renewable Energy Country Profiles take stock of the latest development of renewable energy in two regions where renewable energy can make a significant contribution to combat climate change and bring modern energy services to everyone: Africa and the Pacific. These two regions are presented separately in this volume and its sister publication. The country profiles combine elements of IRENA analysis with the latest information available from a vast array of sources in order to give a brief yet comprehensive and up-to-date picture of the situation of renewable energy that includes energy supply, electrical capacity, energy access, policies, targets, investment climate, projects and endowment in renewable energy resources. Because of the different timelines of these sources, data presented here refer to years between 2008 and 2012. Data availability also differs from country to country, which makes comparison with a wider regional group possible only for the year for which figures are available for all the members of the group; while this may not be the most recent year, the differences between countries, regions and the world remain striking. The current country profiles are just a starting point; they will be extended upon with new indicators to make them more informative, and maintained as a live product on the IRENA website as a key source of information on renewable energy.

  1. A UML profile for framework modeling

    Institute of Scientific and Technical Information of China (English)

    XU Xiao-liang(徐小良); WANG Le-yu(汪乐宇); ZHOU Hong(周泓)

    2004-01-01

    The current standard Unified Modeling Language(UML) could not model framework flexibility and extendibility adequately due to lack of appropriate constructs to distinguish framework hot-spots from kernel elements. A new UML profile that may customize UML for framework modeling was presented using the extension mechanisms of UML, providing a group of UML extensions to meet the needs of framework modeling. In this profile, the extended class diagrams and sequence diagrams were defined to straightforwardly identify the hot-spots and describe their instantiation restrictions. A transformation model based on design patterns was also put forward, such that the profile based framework design diagrams could be automatically mapped to the corresponding implementation diagrams. It was proved that the presented profile makes framework modeling more straightforwardly and therefore easier to understand and instantiate.

  2. A UML profile for framework modeling.

    Science.gov (United States)

    Xu, Xiao-liang; Wang, Le-yu; Zhou, Hong

    2004-01-01

    The current standard Unified Modeling Language(UML) could not model framework flexibility and extendability adequately due to lack of appropriate constructs to distinguish framework hot-spots from kernel elements. A new UML profile that may customize UML for framework modeling was presented using the extension mechanisms of UML, providing a group of UML extensions to meet the needs of framework modeling. In this profile, the extended class diagrams and sequence diagrams were defined to straightforwardly identify the hot-spots and describe their instantiation restrictions. A transformation model based on design patterns was also put forward, such that the profile based framework design diagrams could be automatically mapped to the corresponding implementation diagrams. It was proved that the presented profile makes framework modeling more straightforwardly and therefore easier to understand and instantiate.

  3. Estimating Cognitive Profiles Using Profile Analysis via Multidimensional Scaling (PAMS)

    Science.gov (United States)

    Kim, Se-Kang; Frisby, Craig L.; Davison, Mark L.

    2004-01-01

    Two of the most popular methods of profile analysis, cluster analysis and modal profile analysis, have limitations. First, neither technique is adequate when the sample size is large. Second, neither method will necessarily provide profile information in terms of both level and pattern. A new method of profile analysis, called Profile Analysis via…

  4. Lower hybrid counter current drive for edge current density modification in DIII-D

    Energy Technology Data Exchange (ETDEWEB)

    Fenstermacher, M.E.; Nevins, W.M. [Lawrence Livermore National Lab., CA (US); Porkolab, M.; Bonoli, P.T. [Massachusetts Inst. of Technology, Cambridge, MA (US). Plasma Fusion Center; Harvey, R.W. [General Atomics, San Diego, CA (US)

    1993-07-01

    Each of the Advanced Tokamak operating modes in DIII-D is thought to have a distinctive current density profile. So far these modes have only been achieved transiently through experiments which ramp the plasma current and shape. Extension of these modes to steady state requires non-inductive current profile control, e.g. with lower hybrid current drive (LHCD). Calculations of LHCD have been done for DIII-D using the ACCOME and CQL3D codes, showing that counter driven current at the plasma edge can cancel some of the undesirable edge bootstrap current and potentially extend the VH-mode. Results are presented for scenarios using 2.45 GHz LH waves launched from both the midplane and off-axis ports. The sensitivity of the results to injected power, n{sub e} and T{sub e}, and launched wave spectrum is also shown.

  5. Machine Trades. Ohio's Competency Analysis Profile.

    Science.gov (United States)

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a current comprehensive and verified employer competency program list for machine trades. Each unit (with or without subunits) contains competencies and competency builders that identify the occupational, academic, and employability…

  6. Premorbid Adjustment Profiles in Psychosis and the Role of Familial Factors

    NARCIS (Netherlands)

    Quee, Piotr J.; Meijer, Julia H.; Islam, Md Atiqul; Aleman, Andre; Alizadeh, Behrooz Z.; Meijer, Carin J.; van den Heuvel, Edwin R.

    2014-01-01

    Disease heterogeneity in patients with psychotic disorder may be explained by distinct profiles of premorbid adjustment. The current study explored premorbid adjustment profiles in patients with psychotic disorders, associations with cognitive and clinical characteristics after disease onset, and th

  7. Premorbid adjustment profiles in psychosis and the role of familial factors

    NARCIS (Netherlands)

    Quee, Piotr J; Meijer, Julia H; Islam, Md Atiqul; Aleman, André; Alizadeh, Behrooz Z; Meijer, Carin J; van den Heuvel, Edwin R

    2014-01-01

    Disease heterogeneity in patients with psychotic disorder may be explained by distinct profiles of premorbid adjustment. The current study explored premorbid adjustment profiles in patients with psychotic disorders, associations with cognitive and clinical characteristics after disease onset, and th

  8. The APWL Wideband Wall Current Monitor

    CERN Document Server

    Bohl, T

    2009-01-01

    A wideband wall current monitor was designed for use in LHC. The pick-up, named APWL, is of the coaxial type. Its main mechanical and electrical parameters are described and evaluated. The measured pick-up response is used to calculate the expected bunch profile obtainable with a pick-up of this type.

  9. Qualitative Value Profiling

    DEFF Research Database (Denmark)

    Duus, Henrik Johannsen; Bjerre, Mogens

    2015-01-01

    Qualitative value profiling (QVP) is a relatively unknown method of strategic analysis for companies in international business-to-business settings. The purpose of QVP is to reduce the information complexity that is faced by international companies in dealing with business partners. The QVP method...... allows the development of 1) profiles of the target country in which operations are to take place, 2) profiles of the buying center (i.e. the group of decision makers) in the partner company, and 3) profiles of the product/service offering. It also allows the development of a semantic scaling method...... for deeper analysis of all involved factors. This paper presents the method and compares and contrasts it with other similar methods like the PESTELE method known from corporate strategy, the STEEPAL method known from scenario analysis, and the Politics-Institutions-Economy (PIE) framework known from...

  10. Profile of Older Americans

    Science.gov (United States)

    ... covers 15 topical areas, including population, income and poverty, living arrangements, education, health, and caregiving. A Profile ... Elder Justice Innovation Grants Late Life Domestic Violence World Elder Abuse Awareness Day State Grants to Enhance ...

  11. Prescription Drug Profiles PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Prescription Drug Profiles Public Use Files (PUFs) drawn from Medicare prescription drug claims for the year of the date on which the...

  12. Beach Profile Locations

    Data.gov (United States)

    California Department of Resources — Beaches are commonly characterized by cross-shore surveys. The resulting profiles represent the elevation of the beach surface and nearshore seabed from the back of...

  13. Fishing Community Profiles

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — To enable fisheries managers to comply with National Standard 8 (NS8), NMFS social scientists around the nation are preparing fishing community profiles that present...

  14. Wind Profiling Radar

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Clutter present in radar return signals as used for wind profiling is substantially removed by carrying out a Daubechies wavelet transformation on a time series of...

  15. Profiles in Cancer Research

    Science.gov (United States)

    These articles put a face to some of the thousands of individuals who contribute to NCI’s cancer research efforts. The profiles highlight the work of scientists and clinicians and describe the circumstances and motivation behind their work.

  16. Profiling the Mobile Customer

    DEFF Research Database (Denmark)

    Jessen, Pernille Wegener; King, Nancy J.

    2010-01-01

    Mobile customers are increasingly being tracked and profiled by behavioural advertisers to enhance delivery of personalized advertising. This type of profiling relies on automated processes that mine databases containing personally-identifying or anonymous consumer data, and it raises a host...... of significant concerns about privacy and data protection. This second article in a two part series on "Profiling the Mobile Customer" explores how to best protect consumers' privacy and personal data through available mechanisms that include industry self-regulation, privacy-enhancing technologies...... and legislative reform. 1 It discusses how well privacy and personal data concerns related to consumer profiling are addressed by two leading industry self-regulatory codes from the UK and the U.S. that aim to establish fair information practices for behavioural advertising by their member companies. It also...

  17. Fire Management Species Profiles

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The objective of the Fire Management Species Profile project is to identify habitat management objectives that are specific, measurable, achievable, clearly...

  18. Beach Profile Locations

    Data.gov (United States)

    California Department of Resources — Beaches are commonly characterized by cross-shore surveys. The resulting profiles represent the elevation of the beach surface and nearshore seabed from the back of...

  19. Surface waves on arbitrary vertically-sheared currents

    CERN Document Server

    Smeltzer, Benjamin K

    2016-01-01

    We study dispersion properties of linear surface gravity waves propagating in an arbitrary direction atop a current profile of arbitrary depth-varying magnitude using a piecewise linear approximation, and develop a robust numerical framework for practical calculation. The method has been much used in the past in 2D, and we herein extend and apply it to 3D problems. Being valid for all wavelengths without loss of accuracy, the scheme is particularly well suited to solve problems involving Fourier transformations in the horizontal plane. We examine the group and phase velocities over different wavelength regimes and current profiles, highlighting characteristics due to the depth-variable vorticity. We show an example application to ship waves on an arbitrary current profile, and demonstrate qualitative differences in the wake patterns between a concave down profile when compared to a constant shear profile with equal depth-averaged vorticity. New insight is given concerning the nature of extra spurious solution...

  20. BWR AXIAL PROFILE

    Energy Technology Data Exchange (ETDEWEB)

    J. Huffer

    2004-09-28

    The purpose of this calculation is to develop axial profiles for estimating the axial variation in burnup of a boiling water reactor (BWR) assembly spent nuclear fuel (SNF) given the average burnup of an assembly. A discharged fuel assembly typically exhibits higher burnup in the center and lower burnup at the ends of the assembly. Criticality safety analyses taking credit for SNF burnup must account for axially varying burnup relative to calculations based on uniformly distributed assembly average burnup due to the under-burned tips. Thus, accounting for axially varying burnup in criticality analyses is also referred to as accounting for the ''end effect'' reactivity. The magnitude of the reactivity change due to ''end effect'' is dependent on the initial assembly enrichment, the assembly average burnup, and the particular axial profile characterizing the burnup distribution. The set of bounding axial profiles should incorporate multiple BWR core designs and provide statistical confidence (95 percent confidence that 95 percent of the population is bound by the profile) that end nodes are conservatively represented. The profiles should also conserve the overall burnup of the fuel assembly. More background on BWR axial profiles is provided in Attachment I.

  1. Accelerated Profile HMM Searches.

    Directory of Open Access Journals (Sweden)

    Sean R Eddy

    2011-10-01

    Full Text Available Profile hidden Markov models (profile HMMs and probabilistic inference methods have made important contributions to the theory of sequence database homology search. However, practical use of profile HMM methods has been hindered by the computational expense of existing software implementations. Here I describe an acceleration heuristic for profile HMMs, the "multiple segment Viterbi" (MSV algorithm. The MSV algorithm computes an optimal sum of multiple ungapped local alignment segments using a striped vector-parallel approach previously described for fast Smith/Waterman alignment. MSV scores follow the same statistical distribution as gapped optimal local alignment scores, allowing rapid evaluation of significance of an MSV score and thus facilitating its use as a heuristic filter. I also describe a 20-fold acceleration of the standard profile HMM Forward/Backward algorithms using a method I call "sparse rescaling". These methods are assembled in a pipeline in which high-scoring MSV hits are passed on for reanalysis with the full HMM Forward/Backward algorithm. This accelerated pipeline is implemented in the freely available HMMER3 software package. Performance benchmarks show that the use of the heuristic MSV filter sacrifices negligible sensitivity compared to unaccelerated profile HMM searches. HMMER3 is substantially more sensitive and 100- to 1000-fold faster than HMMER2. HMMER3 is now about as fast as BLAST for protein searches.

  2. Evaluation of multiple-frequency, active and passive acoustics as surrogates for bedload transport

    Science.gov (United States)

    Wood, Molly S.; Fosness, Ryan L.; Pachman, Gregory; Lorang, Mark; Tonolla, Diego

    2015-01-01

    The use of multiple-frequency, active acoustics through deployment of acoustic Doppler current profilers (ADCPs) shows potential for estimating bedload in selected grain size categories. The U.S. Geological Survey (USGS), in cooperation with the University of Montana (UM), evaluated the use of multiple-frequency, active and passive acoustics as surrogates for bedload transport during a pilot study on the Kootenai River, Idaho, May 17-18, 2012. Four ADCPs with frequencies ranging from 600 to 2000 kHz were used to measure apparent moving bed velocities at 20 stations across the river in conjunction with physical bedload samples. Additionally, UM scientists measured the sound frequencies of moving particles with two hydrophones, considered passive acoustics, along longitudinal transects in the study reach. Some patterns emerged in the preliminary analysis which show promise for future studies. Statistically significant relations were successfully developed between apparent moving bed velocities measured by ADCPs with frequencies 1000 and 1200 kHz and bedload in 0.5 to 2.0 mm grain size categories. The 600 kHz ADCP seemed somewhat sensitive to the movement of gravel bedload in the size range 8.0 to 31.5 mm, but the relation was not statistically significant. The passive hydrophone surveys corroborated the sample results and could be used to map spatial variability in bedload transport and to select a measurement cross-section with moving bedload for active acoustic surveys and physical samples.

  3. Suspended sediment concentration profiles from synoptic satellite observations

    Digital Repository Service at National Institute of Oceanography (India)

    Ramakrishnan, R.; Rajawat, A.S.; Chauhan, O.S.

    A method is developed to estimate vertical suspended sediment concentration (SSC) profiles in Gulf of Kachchh, from the sediment concentration values derived from synoptic observations of Ocean Colour Monitor (OCM). Under the influence of currents...

  4. Gene expression profiling of benign and malignant pheochromocytoma.

    NARCIS (Netherlands)

    Brouwers, F.M.; Elkahloun, A.G.; Munson, P.J.; Eisenhofer, G.; Barb, J.; Linehan, W.M.; Lenders, J.W.M.; Krijger, R.R. de; Mannelli, M.; Udelsman, R.; Ocal, I.T.; Shulkin, B.L.; Bornstein, S.R.; Breza, J.; Ksinantova, L.; Pacak, K.

    2006-01-01

    There are currently no reliable diagnostic and prognostic markers or effective treatments for malignant pheochromocytoma. This study used oligonucleotide microarrays to examine gene expression profiles in pheochromocytomas from 90 patients, including 20 with malignant tumors, the latter including

  5. Current measurement apparatus

    Science.gov (United States)

    Umans, Stephen D.

    2008-11-11

    Apparatus and methods are provided for a system for measurement of a current in a conductor such that the conductor current may be momentarily directed to a current measurement element in order to maintain proper current without significantly increasing an amount of power dissipation attributable to the current measurement element or adding resistance to assist in current measurement. The apparatus and methods described herein are useful in superconducting circuits where it is necessary to monitor current carried by the superconducting elements while minimizing the effects of power dissipation attributable to the current measurement element.

  6. Computer-Aided Detection of Rapid, Overt, Airborne, Reconnaissance Data with the Capability of Removing Oceanic Noises

    Science.gov (United States)

    2013-12-01

    ABBREVIATIONS ABS assault breaching system ADCP acoustic Doppler current profiler ALMDS airborne laser mine detection system AMCM air mine...detects and classifies all types of seam mines in the water column.(PEO LMW 2009) • Airborne Laser Mine Detection System (ALMDS): allows MILCO’s to be... dolphins and sea lions excel in mine detection and neutralization, swimmer defense, and recovery of mines, torpedoes, and 27 other objects

  7. Evaluation of Resuspension from Propeller Wash in DoD Harbors

    Science.gov (United States)

    2016-05-01

    ACRONYMS AND ABBREVIATIONS ADCP Acoustic Doppler Current Profiler ADV Acoustic Doppler Velocimeter CH3D Curvilinear Hydrodynamics in three dimensions...as contaminated, then the Comprehensive Environmental Response, Compensation , and Liability Act , which makes federal agencies liable for releases of...traps sediment sieves ICP-MS Maynord CH3D ADV= Acoustic Doppler Velocimeter, PIV= Particle Image Velocimeter, OBS= Optical Backscatter Sensor, ICP-MS

  8. Progress towards Acoustic Suspended Sediment Transport Monitoring: Fraser River, BC

    Science.gov (United States)

    Attard, M. E.; Venditti, J. G.; Church, M. A.; Kostaschuk, R. A.

    2011-12-01

    Our ability to predict the timing and quantity of suspended sediment transport is limited because fine sand, silt and clay delivery are supply limited, requiring empirical modeling approaches of limited temporal stability. A solution is the development of continuous monitoring techniques capable of tracking sediment concentrations and grain-size. Here we examine sediment delivery from upstream sources to the lower Fraser River. The sediment budget of the lower Fraser River provides a long-term perspective of the net changes in the channels and in sediment delivery to Fraser Delta. The budget is based on historical sediment rating curves developed from data collected from 1965-1986 by the Water Survey of Canada. We explore the possibility of re-establishing the sediment-monitoring program using hydro-acoustics by evaluating the use of a 300 kHz side-looking acoustic Doppler current profiler (aDcp), mounted just downstream of the sand-gravel transition at Mission, for continuous measurement of suspended sediment transport. Complementary field observations include conventional bottle sampling with a P-63 sampler, vertical profiles with a downward-looking 600 kHz aDcp, and 1200 kHz aDcp discharge measurements. We have successfully completed calibration of the downward-looking aDcp with the P-63 samples; the side-looking aDcp signals remain under investigation. A comparison of several methods for obtaining total sediment flux indicates that suspended sediment concentration (SSC) closely follows discharge through the freshet and peaks in total SSC and sand SSC coincide with peak measurements of discharge. Low flows are dominated by fine sediment and grain size increases with higher flows. This research assesses several techniques for obtaining sediment flux and contributes to the understanding of sediment delivery to sand-bedded portions of the river.

  9. Tungsten quasispherical wire loads with a profiled mass

    Energy Technology Data Exchange (ETDEWEB)

    Grabovskii, E. V.; Dzhangobegov, V. V., E-mail: jvv88@triniti.ru; Oleinik, G. M.; Rodionov, R. N. [State Research Center of the Russian Federation Troitsk Institute for Innovation and Fusion Research (TRINITI) (Russian Federation)

    2015-12-15

    Wire arrays made from micrometer tungsten wires with linear mass profiled along their height are developed for experiments on the generation of X-ray radiation upon pinch compression with a current of ∼3 MA at a pulse duration of ∼100 ns. Wires are imaged with a scanning electron microscope, and their diameter is determined. It is shown that the arrays have such a profile of height distribution of linear mass that allows for compact spherical compression upon current implosion.

  10. Absolute geostrophic currents in global tropical oceans

    Science.gov (United States)

    Yang, Lina; Yuan, Dongliang

    2016-11-01

    A set of absolute geostrophic current (AGC) data for the period January 2004 to December 2012 are calculated using the P-vector method based on monthly gridded Argo profiles in the world tropical oceans. The AGCs agree well with altimeter geostrophic currents, Ocean Surface Current Analysis-Real time currents, and moored current-meter measurements at 10-m depth, based on which the classical Sverdrup circulation theory is evaluated. Calculations have shown that errors of wind stress calculation, AGC transport, and depth ranges of vertical integration cannot explain non-Sverdrup transport, which is mainly in the subtropical western ocean basins and equatorial currents near the Equator in each ocean basin (except the North Indian Ocean, where the circulation is dominated by monsoons). The identified non-Sverdrup transport is thereby robust and attributed to the joint effect of baroclinicity and relief of the bottom (JEBAR) and mesoscale eddy nonlinearity.

  11. Cryogenic current leads

    Energy Technology Data Exchange (ETDEWEB)

    Zizek, F.

    1982-01-01

    Theoretical, technical and design questions are examined of cryogenic current leads for SP of magnetic systems. Simplified mathematical models are presented for the current leads. To illustrate modeling, the calculation is made of the real current leads for 500 A and three variants of current leads for 1500 A for the enterprise ''Shkoda.''

  12. Current interruption transients calculation

    CERN Document Server

    Peelo, David F

    2014-01-01

    Provides an original, detailed and practical description of current interruption transients, origins, and the circuits involved, and how they can be calculated Current Interruption Transients Calculationis a comprehensive resource for the understanding, calculation and analysis of the transient recovery voltages (TRVs) and related re-ignition or re-striking transients associated with fault current interruption and the switching of inductive and capacitive load currents in circuits. This book provides an original, detailed and practical description of current interruption transients, origins,

  13. Country profile: Hungary

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Country Profile: Hungary has been prepared as a background document for use by US Government agencies and US businesses interested in becoming involved with the new democracies of Eastern Europe as they pursue sustainable economic development. The focus of the Profile is on energy and highlights information on Hungary's energy supply, demand, and utilization. It identifies patterns of energy usage in the important economic sectors, especially industry, and provides a preliminary assessment for opportunities to improve efficiencies in energy production, distribution and use by introducing more efficient technologies. The use of more efficient technologies would have the added benefit of reducing the environmental impact which, although is not the focus of the report, is an issue that effects energy choices. The Profile also presents considerable economic information, primarily in the context of how economic restructuring may affect energy supply, demand, and the introduction of more efficient technologies.

  14. Country profile: Hungary

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Country Profile: Hungary has been prepared as a background document for use by US Government agencies and US businesses interested in becoming involved with the new democracies of Eastern Europe as they pursue sustainable economic development. The focus of the Profile is on energy and highlights information on Hungary`s energy supply, demand, and utilization. It identifies patterns of energy usage in the important economic sectors, especially industry, and provides a preliminary assessment for opportunities to improve efficiencies in energy production, distribution and use by introducing more efficient technologies. The use of more efficient technologies would have the added benefit of reducing the environmental impact which, although is not the focus of the report, is an issue that effects energy choices. The Profile also presents considerable economic information, primarily in the context of how economic restructuring may affect energy supply, demand, and the introduction of more efficient technologies.

  15. Detonation Wave Profile

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-14

    The Zel’dovich-von Neumann-Doering (ZND) profile of a detonation wave is derived. Two basic assumptions are required: i. An equation of state (EOS) for a partly burned explosive; P(V, e, λ). ii. A burn rate for the reaction progress variable; d/dt λ = R(V, e, λ). For a steady planar detonation wave the reactive flow PDEs can be reduced to ODEs. The detonation wave profile can be determined from an ODE plus algebraic equations for points on the partly burned detonation loci with a specified wave speed. Furthermore, for the CJ detonation speed the end of the reaction zone is sonic. A solution to the reactive flow equations can be constructed with a rarefaction wave following the detonation wave profile. This corresponds to an underdriven detonation wave, and the rarefaction is know as a Taylor wave.

  16. Constructing Data Curation Profiles

    Directory of Open Access Journals (Sweden)

    Michael Witt

    2009-12-01

    Full Text Available This paper presents a brief literature review and then introduces the methods, design, and construction of the Data Curation Profile, an instrument that can be used to provide detailed information on particular data forms that might be curated by an academic library. These data forms are presented in the context of the related sub-disciplinary research area, and they provide the flow of the research process from which these data are generated. The profiles also represent the needs for data curation from the perspective of the data producers, using their own language. As such, they support the exploration of data curation across different research domains in real and practical terms. With the sponsorship of the Institute of Museum and Library Services, investigators from Purdue University and the University of Illinois interviewed 19 faculty subjects to identify needs for discovery, access, preservation, and reuse of their research data. For each subject, a profile was constructed that includes information about his or her general research, data forms and stages, value of data, data ingest, intellectual property, organization and description of data, tools, interoperability, impact and prestige, data management, and preservation. Each profile also presents a specific dataset supplied by the subject to serve as a concrete example. The Data Curation Profiles are being published to a public wiki for questions and discussion, and a blank template will be disseminated with guidelines for others to create and share their own profiles. This study was conducted primarily from the viewpoint of librarians interacting with faculty researchers; however, it is expected that these findings will complement a wide variety of data curation research and practice outside of librarianship and the university environment.

  17. Coherent Turbulent Flow Structures in a Gravel-Bed River

    Science.gov (United States)

    Ashley, W.; Macmahan, J. H.; Reniers, A. J.; Thornton, E. B.; Brown, J.; Swick, W. A.

    2010-12-01

    The characteristics of coherent turbulent flow structures were examined during multi-day deployments with three different sensors in a gravel-bed river reach section of the Kootenai River, ID in August 2010. In-situ river velocities were measured using a custom 2 MHz Acoustic Doppler Current Profiler (ADCP) head, an Acoustic Doppler Velocimeter (ADV), and a lagged array of six electromagnetic current meters (ECM) mounted on a GPS-equipped portable aluminum frame. The frame was deployed in the river which varied from 0.6 to 1m water depths and 0.5 to 1.5 m/s velocities. It was also deployed in a small channel, near riffle pools, and on the lee of river obstructions. The ECM array was horizontally mounted on a 4m length pole attached to the frame, oriented in the stream-wise direction, with a sampling frequency of 16 Hz. The lagged spacing of the six ECMs was set to resolve coherent motions from up to 8m in length. The ADCP was fitted with a custom head to measure the along beam velocities in all three axes, with a sampling frequency of 1 Hz, 35cm bins, with a maximum range of 10m. The upstream beam is used to describe the coherent structures in the stream-wise velocity. An iterative maximum likelihood estimator is used to evaluate the streamwise wavenumber-frequency spectrum. The coherent structures measured by the ECM array and ADCP are compared to validate the results by the new ADCP head. Turbulent measurements from the 32 Hz sampled ADV are compared to the ADCP and ECM. Our unique approach provides spatial measurements in river reaches (depths) previously not examined. The flow structure as a function of river feature, bed roughness, and flow velocity are described in the stream-wise and lateral directions. This effort was supported by the Office of Naval Research Coastal Geosciences Program.

  18. Bunch Profiling Using a Rotating Mask

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mitchell; /SLAC /IIT, Chicago

    2012-08-24

    The current method for measuring profiles of proton bunches in accelerators is severely lacking. One must dedicate a great deal of time and expensive equipment to achieve meaningful results. A new method to complete this task uses a rotating mask with slots of three different orientations to collect this data. By scanning over the beam in three different directions, a complete profile for each bunch is built in just seconds, compared to the hours necessary for the previous method. This design was successfully tested using synchrotron radiation emitted by SPEAR3. The profile of the beam was measured in each of the three desired directions. Due to scheduled beam maintenance, only one set of data was completed and more are necessary to solve any remaining issues. The data collected was processed and all of the RMS sizes along the major and minor axes, as well as the tilt of the beam ellipse were measured.

  19. Metropolitan Lima: area profile.

    Science.gov (United States)

    Hakkert, R

    1986-11-01

    This profile of metropolitan Lima, Peru, covers administrative divisions; population growth; age distribution; ethnicity and religion; housing and households; education and health care; economic activity, income, and consumption; transport and communication; and sources of information. Nearly 30% of Peru's entire population and 42% of its urban population live in Lima. The trend continues, yet Lima's urban primacy is waning due to the growth of some regional centers like Trujillo and Chimbote. Lima is still almost 10 times as large as the country's next ranking cities, Trujillo on the northern coast and Arequipa in the south. Peru's main administrative divisions are the 24 departments, of which the Department of Lima is one. These departments are further divided into 156 provinces. Greater Lima consists of 2 such provinces, the province of Lima and the constitutional province of Callao. Although the population of Lima continues to grow, its rate of growth slowed from about 5.5% during the 1960s to about 3.9% in the 1970s. Current projections estimate a metropolitan population of 6.7 million by 1990. On the whole, Lima's age structure is somewhat older than that of the rest of Peru. The median age of the population is 22.3 years, compared to a national figure of 20.4. The proportion of persons over age 65 is only 3.6%, lower than the national average of 4.1%, due to the tendency of in-migration to concentrate people of intermediate ages in the cities. Almost 400,000 inhabitants of greater Lima are bilingual in Spanish and an indigenous language. As elsewhere in Peru, the dominant religion is Roman Catholicism. Lima is a spread out city with few high rise buildings due to the danger of earthquakes. Only 12% of Lima's households are found in apartment buildings. As in other cities of Latin America, the formal housing market is beyond the reach of a major segment of the population. Consequently, much of the urban settlement has occurred through informal self

  20. Country Profiles, Pakistan.

    Science.gov (United States)

    Hardee, J. Gilbert; Satterthwaite, Adaline P.

    A profile of Pakistan is sketched in this paper. Emphasis is placed on the nature, scope, and accomplishments of population activities in the country. Topics and sub-topics include: location and description of the country; population (size, growth patterns, age structure, urban/rural distribution, ethnic and religious composition, migration,…

  1. Sensing the wind profile

    DEFF Research Database (Denmark)

    Pena Diaz, Alfredo

    prole. The boundary-layer height is derived in nearneutral and stable conditions based on turbulent momentum uxes only and in unstable conditions based on profiles of aerosol backscatter from ceilometer measurements. The lidar measuring technique is used to estimate momentum flux, showing high agreement...

  2. A temperature profiler

    Digital Repository Service at National Institute of Oceanography (India)

    Peshwe, V.B.; Desa, E.

    An instrument developed for measuring temperature profiles at sea in depth or time scales is described. PC-based programming offers flexibility in setting up the instrument for the mode of operation prior to each cast. A real time clock built...

  3. A Danish Profiling System

    DEFF Research Database (Denmark)

    Rosholm, Michael; Staghøj, Jonas; Svarer, Michael;

    2006-01-01

    This paper describes the statistical model used for profiling new unemployed workers in Denmark. When a worker – during his or her first six months in unemployment – enters the employment office for the first time, this model predicts whether or not he or she will be unemployed for more than six ...

  4. Country Education Profiles: Algeria.

    Science.gov (United States)

    International Bureau of Education, Geneva (Switzerland).

    One of a series of profiles prepared by the Cooperative Educational Abstracting Service, this brief outline provides basic background information on educational principles, system of administration, structure and organization, curricula, and teacher training in Algeria. Statistics provided by the Unesco Office of Statistics show enrollment at all…

  5. Country Profiles, Malaysia.

    Science.gov (United States)

    Marzuki, Ariffin Bin; Peng, J. Y.

    A profile of Malaysia is sketched in this paper. Emphasis is placed on the nature, scope, and accomplishments of population activities in the country. Topics and sub-topics include: location and description of the country; population (size, growth patterns, age structure, urban/rural distribution, ethnic and religious composition, migration,…

  6. English Teaching Profile: Mexico.

    Science.gov (United States)

    British Council, London (England). English Language and Literature Div.

    This profile of the English language teaching situation in Mexico examines the role of English in society and in the educational system. It is noted that the extent to which English is used in Mexico is affected by the country's proximity to the United States. The educational system is described, with emphasis on English instruction which begins…

  7. Geographic profiling survey

    NARCIS (Netherlands)

    Emeno, Karla; Bennell, Craig; Snook, Brent; Taylor, Paul Jonathon

    Geographic profiling (GP) is an investigative technique that involves predicting a serial offender?s home location (or some other anchor point) based on where he or she committed a crime. Although the use of GP in police investigations appears to be on the rise, little is known about the procedure

  8. COMPENDEX Profile Adjustment Manual.

    Science.gov (United States)

    Standera, Oldrich

    If an information system is to survive, the users must be satisfied that it meets their needs promptly and consistently. It is essential to react quickly to any undesired result such as an extemely high or low output, too low a relevance or recall, or both. The search editor should feel responsbile not only for the profile setup but also for its…

  9. Towards fully non-inductive current drive operation in JET

    Energy Technology Data Exchange (ETDEWEB)

    Litaudon, X. [Association Euratom-CEA Cadarache, Dept. de Recherches sur la Fusion Controlee, 13 - Saint-Paul-lez-Durance (France); Crisanti, F. [Association Euratom-ENEA sulla Fusione, Centro Ricerche Frascati (Italy); Alper, B. [Euratom-UKAEA Fusion Association, Culham Science Centre, Abingdon, Oxon (United Kingdom)] [and others

    2002-01-01

    Quasi steady operation has been achieved at JET in the high confinement regime with Internal Transport Barriers, ITBs. The ITBs' performances are maintained up to 11 s. This duration, much larger than the energy confinement time, is already approaching a current resistive time. The high performance phase is limited only by plant constraints. The radial profiles of the thermal electron and ion pressures have steep gradients typically at mid-plasma radius. A large fraction of non-inductive current (above 80%) is sustained throughout the high performance phase with a poloidal beta exceeding unity. The safety factor profile plays an important role in sustaining the ITB characteristics. In this regime where the self-generated bootstrap current (up to LOMA) represents 50% of the total current, the resistive evolution of the non-monotonic q-profile is slowed down by using off-axis lower hybrid current drive. (authors)

  10. Currents for Arbitrary Helicity

    CERN Document Server

    Dragon, Norbert

    2016-01-01

    Using Mackey's classification of unitary representations of the Poincar\\'e group on massles states of arbitrary helicity we disprove the claim that states with helicity |h|>=1 cannot couple to a conserved current by constructing such a current.

  11. Magnetic current sensor

    Science.gov (United States)

    Black, Jr., William C. (Inventor); Hermann, Theodore M. (Inventor)

    1998-01-01

    A current determiner having an output at which representations of input currents are provided having an input conductor for the input current and a current sensor supported on a substrate electrically isolated from one another but with the sensor positioned in the magnetic fields arising about the input conductor due to any input currents. The sensor extends along the substrate in a direction primarily perpendicular to the extent of the input conductor and is formed of at least a pair of thin-film ferromagnetic layers separated by a non-magnetic conductive layer. The sensor can be electrically connected to a electronic circuitry formed in the substrate including a nonlinearity adaptation circuit to provide representations of the input currents of increased accuracy despite nonlinearities in the current sensor, and can include further current sensors in bridge circuits.

  12. Used Fuel Cask Identification through Neutron Profile

    Energy Technology Data Exchange (ETDEWEB)

    Rauch, Eric Benton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-20

    Currently, most spent fuel is stored near reactors. An interim consolidated fuel storage facility would receive fuel from multiple sites and store it in casks on site for decades. For successful operation of such a facility there is need for a way to restore continuity of knowledge if lost as well as a method that will indicate state of fuel inside the cask. Used nuclear fuel is identifiable by its radiation emission, both gamma and neutron. Neutron emission from fission products, multiplication from remaining fissile material, and the unique distribution of both in each cask produce a unique neutron signature. If two signatures taken at different times do not match, either changes within the fuel content or misidentification of a cask occurred. It was found that identification of cask loadings works well through the profile of emitted neutrons in simulated real casks. Even casks with similar overall neutron emission or average counts around the circumference can be distinguished from each other by analyzing the profile. In conclusion, (1) identification of unaltered casks through neutron signature profile is viable; (2) collecting the profile provides insight to the condition and intactness of the fuel stored inside the cask; and (3) the signature profile is stable over time.

  13. Current and Current Fluctuations in Quantum Shuttles

    DEFF Research Database (Denmark)

    Jauho, Antti-Pekka; Flindt, Christian; Novotny, Tomas

    2005-01-01

    theoretical tools needed for the analysis, e.g., generalized master equations and Wigner functions, and we outline the methods how the resulting large numerical problems can be handled. Illustrative results are given for current, noise, and full counting statistics for a number of model systems. Throughout...

  14. Controlled current inductors

    Science.gov (United States)

    Thaler, S.

    1970-01-01

    Magnetic permeability and shape of special core inserts are varied to produce desired changes in saturation characteristics of current dependent inductor, thus improving its inductance-to-current properties. Materials and saturation levels of the core pieces are selected to permit a wide variety of relationships between inductance and current.

  15. Surface waves on currents with arbitrary vertical shear

    Science.gov (United States)

    Smeltzer, Benjamin K.; Ellingsen, Simen Å.

    2017-04-01

    We study dispersion properties of linear surface gravity waves propagating in an arbitrary direction atop a current profile of depth-varying magnitude using a piecewise linear approximation and develop a robust numerical framework for practical calculation. The method has been much used in the past for the case of waves propagating along the same axis as the background current, and we herein extend and apply it to problems with an arbitrary angle between the wave propagation and current directions. Being valid for all wavelengths without loss of accuracy, the scheme is particularly well suited to solve problems involving a broad range of wave vectors, such as ship waves and Cauchy-Poisson initial value problems. We examine the group and phase velocities over different wavelength regimes and current profiles, highlighting characteristics due to the depth-variable vorticity. We show an example application to ship waves on an arbitrary current profile and demonstrate qualitative differences in the wake patterns between concave down and concave up profiles when compared to a constant shear profile with equal depth-averaged vorticity. We also discuss the nature of additional solutions to the dispersion relation when using the piecewise-linear model. These are vorticity waves, drifting vortical structures which are artifacts of the piecewise model. They are absent for a smooth profile and are spurious in the present context.

  16. Decomposition of residue currents

    OpenAIRE

    Andersson, Mats; Wulcan, Elizabeth

    2007-01-01

    Given a submodule $J\\subset \\mathcal O_0^{\\oplus r}$ and a free resolution of $J$ one can define a certain vector valued residue current whose annihilator is $J$. We make a decomposition of the current with respect to Ass$(J)$ that correspond to a primary decomposition of $J$. As a tool we introduce a class of currents that includes usual residue and principal value currents; in particular these currents admit a certain type of restriction to analytic varieties and more generally to construct...

  17. Inrush Current Control Circuit

    Science.gov (United States)

    Cole, Steven W. (Inventor)

    2002-01-01

    An inrush current control circuit having an input terminal connected to a DC power supply and an output terminal connected to a load capacitor limits the inrush current that charges up the load capacitor during power up of a system. When the DC power supply applies a DC voltage to the input terminal, the inrush current control circuit produces a voltage ramp at the load capacitor instead of an abrupt DC voltage. The voltage ramp results in a constant low level current to charge up the load capacitor, greatly reducing the current drain on the DC power supply.

  18. Current Programme 1993.

    Science.gov (United States)

    Bernard Van Leer Foundation, The Hague (Netherlands).

    This 1993 program report profiles the Bernard van Leer Foundation, a private institution based in The Netherlands that concentrates its resources on support for early childhood development. The first two sections provide a general description of the Bernard van Leer Foundation and its work. The third and fourth sections are the foundation's annual…

  19. Study of toroidal current penetration during current ramp in JIPP T-IIU with fast response Zeeman polarimeter

    Energy Technology Data Exchange (ETDEWEB)

    Kuramoto, H.; Hiraki, N. [Kyushu Inst. of Tech., Kitakyushu, Fukuoka (Japan); Toi, K. [and others

    1997-01-01

    The toroidal current penetration is studied in current ramp experiments of the JIPP T-IIU tokamak. The poloidal magnetic field profile in the peripheral region of a plasma (0.5 {<=} {rho} {<=} 1.0) has been measured directly with a newly developed fast response Zeeman polarimeter. The experimental results indicate that an obvious skin effect of toroidal current density is clearly observed during both the current ramp-up and ramp-down experiments. The experimentally obtained toroidal current density profiles are well described by the profiles calculated on the assumption of the neoclassical electrical conductivity. Quasi-linear {Delta}`-analysis of tearing modes for the measured current density profile is consistent with time behaviour of coherent MHD modes such as m=4/n=1 or m=3/n=1 (m: poloidal mode number, n: toroidal mode number) often observed during the current ramp-up phase. The effect of these MHD modes on current penetration during the current ramp-up discharges is studied. (author)

  20. Profile of success

    DEFF Research Database (Denmark)

    Dahlgaard, Jens Jørn; Nørgaard, Anders; Jakobsen, Søren

    1998-01-01

    What management skills must Europe's business leaders improve to achieve business excellence? Which country's leaders are best placed for success? Does the next generation have what it takes to compete? In the second half of their study of the leadership styles that drive business excellence, Jens...... Dahlgaard, Anders Nørgaard and Søren Jakobsen describe an excellent leadership profile that provides the answers....

  1. Qualitative Value Profiling

    DEFF Research Database (Denmark)

    Duus, Henrik Johannsen; Bjerre, Mogens

    2015-01-01

    Qualitative value profiling (QVP) is a relatively unknown method of strategic analysis for companies in international business-to-business settings. The purpose of QVP is to reduce the information complexity that is faced by international companies in dealing with business partners. The QVP method...... and consequently, for the advancement of international development. Further use of QVP is recommended and suggestions for future research are provided....

  2. High throughput drug profiling

    OpenAIRE

    Entzeroth, Michael; Chapelain, Béatrice; Guilbert, Jacques; Hamon, Valérie

    2000-01-01

    High throughput screening has significantly contributed to advances in drug discovery. The great increase in the number of samples screened has been accompanied by increases in costs and in the data required for the investigated compounds. High throughput profiling addresses the issues of compound selectivity and specificity. It combines conventional screening with data mining technologies to give a full set of data, enabling development candidates to be more fully compared.

  3. Practical Differential Profiling

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, M; De Supinski, B R

    2007-02-04

    Comparing performance profiles from two runs is an essential performance analysis step that users routinely perform. In this work we present eGprof, a tool that facilitates these comparisons through differential profiling inside gprof. We chose this approach, rather than designing a new tool, since gprof is one of the few performance analysis tools accepted and used by a large community of users. eGprof allows users to 'subtract' two performance profiles directly. It also includes callgraph visualization to highlight the differences in graphical form. Along with the design of this tool, we present several case studies that show how eGprof can be used to find and to study the differences of two application executions quickly and hence can aid the user in this most common step in performance analysis. We do this without requiring major changes on the side of the user, the most important factor in guaranteeing the adoption of our tool by code teams.

  4. Wide HI profile galaxies

    CERN Document Server

    Brosch, Noah; Zitrin, Adi

    2011-01-01

    We investigate the nature of objects in a complete sample of 28 galaxies selected from the first sky area fully covered by ALFALFA, being well-detected and having HI profiles wider than 550 km/s. The selection does not use brightness, morphology, or any other property derived from optical or other spectral bands. We investigate the degree of isolation, the morphology, and other properties gathered or derived from open data bases and show that some objects have wide HI profiles probably because they are disturbed or are interacting, or might be confused in the ALFALFA beam. We identify a sub-sample of 14 galaxies lacking immediate interacting neighbours and showing regular, symmetric, two-horned HI profiles that we propose as candidate high-mass disk systems (CHMDs). We measure the net-Halpha emission from the CHMDs and combine this with public multispectral data to model the global star formation (SF) properties of each galaxy. The Halpha observations show SFRs not higher than a few solar masses per year. Sim...

  5. Electric current locator

    Science.gov (United States)

    King, Paul E [Corvallis, OR; Woodside, Charles Rigel [Corvallis, OR

    2012-02-07

    The disclosure herein provides an apparatus for location of a quantity of current vectors in an electrical device, where the current vector has a known direction and a known relative magnitude to an input current supplied to the electrical device. Mathematical constants used in Biot-Savart superposition equations are determined for the electrical device, the orientation of the apparatus, and relative magnitude of the current vector and the input current, and the apparatus utilizes magnetic field sensors oriented to a sensing plane to provide current vector location based on the solution of the Biot-Savart superposition equations. Description of required orientations between the apparatus and the electrical device are disclosed and various methods of determining the mathematical constants are presented.

  6. Current limiter circuit system

    Energy Technology Data Exchange (ETDEWEB)

    Witcher, Joseph Brandon; Bredemann, Michael V.

    2017-09-05

    An apparatus comprising a steady state sensing circuit, a switching circuit, and a detection circuit. The steady state sensing circuit is connected to a first, a second and a third node. The first node is connected to a first device, the second node is connected to a second device, and the steady state sensing circuit causes a scaled current to flow at the third node. The scaled current is proportional to a voltage difference between the first and second node. The switching circuit limits an amount of current that flows between the first and second device. The detection circuit is connected to the third node and the switching circuit. The detection circuit monitors the scaled current at the third node and controls the switching circuit to limit the amount of the current that flows between the first and second device when the scaled current is greater than a desired level.

  7. Leflunomide : a manageable safety profile

    NARCIS (Netherlands)

    Riel, P.L.C.M. van; Smolen, J.S.; Emery, P.; Kalden, J.R.; Dougados, M.; Strand, C.V.; Breedveld, F.C.

    2004-01-01

    The safety profile of leflunomide in the treatment of rheumatoid arthritis has been well documented in clinical trials, postmarketing surveillance, and epidemiological studies. Both postmarketing surveillance and epidemiological study results are consistent with the safety profile of leflunomide rep

  8. Quantization of interface currents

    Energy Technology Data Exchange (ETDEWEB)

    Kotani, Motoko [AIMR, Tohoku University, Sendai (Japan); Schulz-Baldes, Hermann [Department Mathematik, Universität Erlangen-Nürnberg, Erlangen (Germany); Villegas-Blas, Carlos [Instituto de Matematicas, Cuernavaca, UNAM, Cuernavaca (Mexico)

    2014-12-15

    At the interface of two two-dimensional quantum systems, there may exist interface currents similar to edge currents in quantum Hall systems. It is proved that these interface currents are macroscopically quantized by an integer that is given by the difference of the Chern numbers of the two systems. It is also argued that at the interface between two time-reversal invariant systems with half-integer spin, one of which is trivial and the other non-trivial, there are dissipationless spin-polarized interface currents.

  9. Low current beam techniques

    Energy Technology Data Exchange (ETDEWEB)

    Saint, A.; Laird, J.S.; Bardos, R.A.; Legge, G.J.F. [Melbourne Univ., Parkville, VIC (Australia). School of Physics; Nishijima, T.; Sekiguchi, H. [Electrotechnical Laboratory, Tsukuba (Japan).

    1993-12-31

    Since the development of Scanning Transmission Microscopy (STIM) imaging in 1983 many low current beam techniques have been developed for the scanning (ion) microprobe. These include STIM tomography, Ion Beam Induced Current, Ion Beam Micromachining and Microlithography and Ionoluminense. Most of these techniques utilise beam currents of 10{sup -15} A down to single ions controlled by beam switching techniques This paper will discuss some of the low beam current techniques mentioned above, and indicate, some of their recent applications at MARC. A new STIM technique will be introduced that can be used to obtain Z-contrast with STIM resolution. 4 refs., 3 figs.

  10. Hanford Site Ecological Quality Profile

    Energy Technology Data Exchange (ETDEWEB)

    Bilyard, Gordon R.; Sackschewsky, Michael R.; Tzemos, Spyridon

    2002-02-17

    This report reviews the ecological quality profile methodology and results for the Hanford Site. It covers critical ecological assets and terrestrial resources, those in Columbia River corridor and those threatened and engdangered, as well as hazards and risks to terrestrial resources. The features of a base habitat value profile are explained, as are hazard and ecological quality profiles.

  11. The mean sea surface height and geoid along the Geosat subtrack from Bermuda to Cape Cod

    Science.gov (United States)

    Kelly, Kathryn A.; Joyce, Terrence M.; Schubert, David M.; Caruso, Michael J.

    1991-07-01

    Measurements of near-surface velocity and concurrent sea level along an ascending Geosat subtrack were used to estimate the mean sea surface height and the Earth's gravitational geoid. Velocity measurements were made on three traverses of a Geosat subtrack within 10 days, using an acoustic Doppler current profiler (ADCP). A small bias in the ADCP velocity was removed by considering a mass balance for two pairs of triangles for which expendable bathythermograph measurements were also made. Because of the large curvature of the Gulf Stream, the gradient wind balance was used to estimate the cross-track component of geostrophic velocity from the ADCP vectors; this component was then integrated to obtain the sea surface height profile. The mean sea surface height was estimated as the difference between the instantaneous sea surface height from ADCP and the Geosat residual sea level, with mesoscale errors reduced by low-pass filtering. The error estimates were divided into a bias, tilt, and mesoscale residual; the bias was ignored because profiles were only determined within a constant of integration. The calculated mean sea surface height estimate agreed with an independent estimate of the mean sea surface height from Geosat, obtained by modeling the Gulf Stream as a Gaussian jet, within the expected errors in the estimates: the tilt error was 0.10 m, and the mesoscale error was 0.044 m. To minimize mesoscale errors in the estimate, the alongtrack geoid estimate was computed as the difference between the mean sea level from the Geosat Exact Repeat Mission and an estimate of the mean sea surface height, rather than as the difference between instantaneous profiles of sea level and sea surface height. In the critical region near the Gulf Stream the estimated error reduction using this method was about 0.07 m. Differences between the geoid estimate and a gravimetric geoid were not within the expected errors: the rms mesoscale difference was 0.24 m rms.

  12. Merging of plasma currents

    NARCIS (Netherlands)

    Bergmans, J.; Schep, T. J.

    2001-01-01

    The merging process of current filaments in a strongly magnetized plasma is described. The evolution is calculated using a contour dynamics method, which accurately tracks piecewise constant distributions of the conserved quantities. In the interaction of two screened currents, both develop dipolar

  13. The Bransfield Gravity Current

    NARCIS (Netherlands)

    Sangrà, P.; Stegner, A.; Hernández-Arencibia, Mónica; Márrero-Díaz, A.; Salinas, C.; Aguiar-González, B.; Henríquez-Pastene, C.H.; Mouriño-Carballido, B.

    2017-01-01

    Using in situ data and laboratory experiments, we show that the circulation of the Bransfield Current (BC) around the South Shetland Islands (SSI) may be characterized in terms of a propagating buoyant gravity current. First, we describe the SSI hydrography and some drifter trajectories, paying spec

  14. Discrete Noether Currents

    CERN Document Server

    Seidl, Gerhart

    2014-01-01

    We present a simple generalization of Noether's theorem for discrete symmetries in relativistic continuum field theories. We calculate explicitly the conserved current for several discrete spacetime and internal symmetries. In addition, we formulate an analogue of the Ward-Takahashi identity for the Noether current associated with a discrete symmetry.

  15. Direct current transformer

    Science.gov (United States)

    Khanna, S. M.; Urban, E. W. (Inventor)

    1979-01-01

    A direct current transformer in which the primary consists of an elongated strip of superconductive material, across the ends of which is direct current potential is described. Parallel and closely spaced to the primary is positioned a transformer secondary consisting of a thin strip of magnetoresistive material.

  16. Electric Current Solves Mazes

    Science.gov (United States)

    Ayrinhac, Simon

    2014-01-01

    We present in this work a demonstration of the maze-solving problem with electricity. Electric current flowing in a maze as a printed circuit produces Joule heating and the right way is instantaneously revealed with infrared thermal imaging. The basic properties of electric current can be discussed in this context, with this challenging question:…

  17. The Bransfield Gravity Current

    NARCIS (Netherlands)

    Sangrà, P.; Stegner, A.; Hernández-Arencibia, Mónica; Márrero-Díaz, A.; Salinas, C.; Aguiar-González, B.; Henríquez-Pastene, C.H.; Mouriño-Carballido, B.

    2017-01-01

    Using in situ data and laboratory experiments, we show that the circulation of the Bransfield Current (BC) around the South Shetland Islands (SSI) may be characterized in terms of a propagating buoyant gravity current. First, we describe the SSI hydrography and some drifter trajectories, paying

  18. Studies of the Origins of the Kuroshio and Mindanao Currents with EM-APEX Floats and HPIES

    Science.gov (United States)

    2013-09-30

    in Fig. 7, was to place HPIES between ADCP mooring. In reality, the location was adjusted based on the multibeam bathymetry surveys around each 3...However some optical interrupters failed to reliably stop at the points to separate ocean from electrode voltages. Further quality control will

  19. GROUP PROFILE Computer Technique

    Directory of Open Access Journals (Sweden)

    Andrey V. Sidorenkov

    2015-01-01

    Full Text Available This article contains a description of the structure, the software and functional capabilities, and the scope and purposes of application of the Group Profile (GP computer technique. This technique rests on a conceptual basis (the microgroup theory, includes 16 new and modified questionnaires, and a unique algorithm, tied to the questionnaires, for identification of informal groups. The GP yields a wide range of data about the group as a whole (47 indices, each informal group (43 indices, and each group member (16 indices. The GP technique can be used to study different types of groups: production (work groups, design teams, military units, etc., academic (school classes, student groups, and sports.

  20. Cohort Profile Update

    DEFF Research Database (Denmark)

    Omland, Lars Haukali; Ahlström, Magnus Glindvad; Obel, Niels

    2014-01-01

    The DHCS is a cohort of all HIV-infected individuals seen in one of the eight Danish HIV centres after 31 December 1994. Here we update the 2009 cohort profile emphasizing the development of the cohort. Every 12-24 months, DHCS is linked with the Danish Civil Registration System (CRS) in order...... of Causes of Death, the Danish National Prescription Registry, the Attainment Register and the Integrated Database for Labour Market Research to get information on vital status, migration, cancer, hospital contacts, causes of death, dispensed prescriptions, education and employment. Using this design, rates...

  1. The Bransfield Gravity Current

    Science.gov (United States)

    Sangrà, Pablo; Stegner, Alexander; Hernández-Arencibia, Mónica; Marrero-Díaz, Ángeles; Salinas, Carolina; Aguiar-González, Borja; Henríquez-Pastene, Cristian; Mouriño-Carballido, Beatriz

    2017-01-01

    Using in situ data and laboratory experiments, we show that the circulation of the Bransfield Current (BC) around the South Shetland Islands (SSI) may be characterized in terms of a propagating buoyant gravity current. First, we describe the SSI hydrography and some drifter trajectories, paying special attention to the recirculation of the BC at the northeastern tip and northern slopes of the SSI. We observed that when the northeastward-flowing BC reaches the northeastern tip of the SSI, it recirculates around an anticyclonic mesoscale eddy that has not previously been reported in this region. Part of this recirculating water then proceeds southwest along the northern SSI shelf break as a narrow baroclinic jet and another part join the Antarctic Circumpolar Current. Consequently, the cross-slope gradients of properties strengthen, and the southern boundary of the Antarctic Circumpolar Current becomes a nearly submesoscale ( 10 km) front. Second, we compare the observations with buoyant gravity current laboratory experiments in an open basin setup where the SSI topographic barrier is represented by a central wall. The resulting circulation of the buoyant gravity current around the wall mirrors our in situ observations. First, a narrow buoyant gravity current flows northeastward along the southern boundary of the wall. Once the head of the buoyant gravity current reaches the tip of the wall, a recirculating anticyclonic vortex is generated, and the buoyant gravity current then proceeds westward along the north side of the wall. This circulation of the BC around the SSI as a buoyant gravity current may contribute to the fertilization of the waters around the SSI, as suggested by previously reported distributions of nutrients and phytoplankton.

  2. Technological requirements of profile machining

    Institute of Scientific and Technical Information of China (English)

    PARK Sangchul; CHUNG Yunchan

    2006-01-01

    The term ‘profile machining’is used to refer to the milling of vertical surfaces described by profile curves. Profile machining requires higher precision (1/1000 mm) than regular 3D machining (1/100 mm) with the erosion of sharp vertices should being especially avoided. Although, profile machining is very essential for making trimming and flangedies, it seldom brought into focus. This paper addresses the technological requirements of profile machining including machining width and depth control,minimizing toolware, and protecting sharp vertices. Issues of controller alarms are also addressed.

  3. Synchronised integrated online e-health profiles.

    Science.gov (United States)

    Liang, Jian; Iannella, Renato; Sahama, Tony

    2011-01-01

    Web-based social networking applications have become increasingly important in recent years. The current applications in the healthcare sphere can support the health management, but to date there is no patient-controlled integrator. This paper proposes a platform called Multiple Profile Manager (MPM) that enables a user to create and manage an integrated profile that can be shared across numerous social network sites. Moreover, it is able to facilitate the collection of personal healthcare data, which makes a contribution to the development of public health informatics. Here we want to illustrate how patients and physicians can be benefited from enabling the platform for online social network sites. The MPM simplifies the management of patients' profiles and allows health professionals to obtain a more complete picture of the patients' background so that they can provide better health care. To do so, we demonstrate a prototype of the platform and describe its protocol specification, which is an XMPP (Extensible Messaging and Presence Protocol) [1] extension, for sharing and synchronising profile data (vCard²) between different social networks.

  4. Exploration of ion temperature profile measurements at JET using the upgraded neutron profile monitor

    Energy Technology Data Exchange (ETDEWEB)

    Marocco, D.; Esposito, B.; Riva, M. [Associazione EURATOM-ENEA sulla Fusione, C.R. Frascati, C.P. 65, Frascati I-00044, Roma (Italy); Collaboration: JET-EFDA Contributors

    2012-10-15

    The neutron profile monitor (NPM), routinely used at the Joint European Torus for neutron emissivity profile measurements, consists of two fan-shaped arrays of collimators and each line of sight (LOS) is equipped with a NE213 liquid organic scintillator for simultaneous measurements of the 2.5 MeV and 14 MeV neutrons. A digital system developed in ENEA has replaced the analog acquisition electronics and now enables the NPM to perform spatially resolved neutron spectrometry by providing neutron pulse height spectra (PHS) for each LOS. However, the NPM was not originally designed as a spectrometer and, therefore, lacks several key features, such as detailed measurements of the detector response functions and the presence of detector stability monitors. We present a proof of principle of ion temperature profile measurements derived from the NPM PHS in high plasma current discharges using simulated detector response functions.

  5. An Enhanced Profile Management System to Support Adaptability

    Institute of Scientific and Technical Information of China (English)

    Chen Ting; Yang Yun

    2008-01-01

    An integrated management architecture which called Adaptive Agent and Profile Management System (AAPMS) was proposed here. Using this system, users can get an adaptive service list according to their current condition (terminal capability, user preference, etc.). After choosing a service, the users only need to download a simple service agent to their mobile device and install it, and then the service agent will connect to the corresponding service provider. The users and the service providers can also manage their profiles using AAPMS.

  6. Fitness on Facebook: Advertisements Generated in Response to Profile Content

    OpenAIRE

    Villiard, Hope; Moreno, Megan A

    2012-01-01

    Obesity is a challenging problem affecting almost half of college students. To solve this complex health problem, innovative approaches must be utilized. Over 94 percent of college students maintain a Facebook profile, providing them a venue to publicly disclose current fitness behaviors. Displayed advertisements on Facebook are tailored to profile content and may influence college students' fitness efforts. Facebook may be an innovative venue for improving college students' fitness behaviors...

  7. Fitness on Facebook: Advertisements Generated in Response to Profile Content

    OpenAIRE

    Villiard, Hope; Moreno, Megan A.

    2012-01-01

    Obesity is a challenging problem affecting almost half of college students. To solve this complex health problem, innovative approaches must be utilized. Over 94 percent of college students maintain a Facebook profile, providing them a venue to publicly disclose current fitness behaviors. Displayed advertisements on Facebook are tailored to profile content and may influence college students' fitness efforts. Facebook may be an innovative venue for improving college students' fitness behaviors...

  8. Test of the Additivity Principle for Current Fluctuations in a Model of Heat Conduction

    Science.gov (United States)

    Hurtado, Pablo I.; Garrido, Pedro L.

    2009-06-01

    The additivity principle allows to compute the current distribution in many one-dimensional (1D) nonequilibrium systems. Using simulations, we confirm this conjecture in the 1D Kipnis-Marchioro-Presutti model of heat conduction for a wide current interval. The current distribution shows both Gaussian and non-Gaussian regimes, and obeys the Gallavotti-Cohen fluctuation theorem. We verify the existence of a well-defined temperature profile associated to a given current fluctuation. This profile is independent of the sign of the current, and this symmetry extends to higher-order profiles and spatial correlations. We also show that finite-time joint fluctuations of the current and the profile are described by the additivity functional. These results suggest the additivity hypothesis as a general and powerful tool to compute current distributions in many nonequilibrium systems.

  9. Flux consumption, current ramp-up and current diffusion in Tore Supra non-inductive Lower Hybrid scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Kazarian, F.; Litaudon, X.; Moreau, D.; Arslanbekov, R.; Hoang, G.T.; Joffrin, E.; Peysson, Y.; Allibert, J.P.; Ane, J.M.; Bremond, S. [Association Euratom-CEA, Centre d`Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee

    1995-12-31

    The main objective of the Lower Hybrid (LH) experiments performed on Tore Supra is to provide large flux savings for long pulse operation while controlling the plasma current density profile. This goal will be best achieved by applying LH wave directly during the current ramp-up phase. Experiments have been performed where a large fraction of the current is driven non-inductively during the ramp-up phase. A theoretical flux consumption scaling is presented and compared to experimental data. The time evolutions of the current density profiles are analysed with a new current diffusion code (CRONOS). In view to achieve fully non-inductive current drive discharges in a fast, systematic and reproducible way, experiments where the primary voltage is imposed have been carried out. In a complementary approach, an appropriate transformer flux feedback scheme has been also studied. (author) 6 refs.; 6 figs.

  10. Genomic risk profiling: attitudes and use in personal and clinical care of primary care physicians who offer risk profiling.

    Science.gov (United States)

    Haga, Susanne B; Carrig, Madeline M; O'Daniel, Julianne M; Orlando, Lori A; Killeya-Jones, Ley A; Ginsburg, Geoffrey S; Cho, Alex

    2011-08-01

    Genomic risk profiling involves the analysis of genetic variations linked through statistical associations to a range of disease states. There is considerable controversy as to how, and even whether, to incorporate these tests into routine medical care. To assess physician attitudes and uptake of genomic risk profiling among an 'early adopter' practice group. We surveyed members of MDVIP, a national group of primary care physicians (PCPs), currently offering genomic risk profiling as part of their practice. All physicians in the MDVIP network (N = 356) We obtained a 44% response rate. One third of respondents had ordered a test for themselves and 42% for a patient. The odds of having ordered personal testing were 10.51-fold higher for those who felt well-informed about genomic risk testing (p risk profiling. Educational and interpretive support may enhance uptake of genomic risk profiling.

  11. Profile control studies for JET optimised shear regime

    Energy Technology Data Exchange (ETDEWEB)

    Litaudon, X.; Becoulet, A.; Eriksson, L.G.; Fuchs, V.; Huysmans, G.; How, J.; Moreau, D.; Rochard, F.; Tresset, G.; Zwingmann, W. [Association Euratom-CEA, CEA/Cadarache, Dept. de Recherches sur la Fusion Controlee, DRFC, 13 - Saint-Paul-lez-Durance (France); Bayetti, P.; Joffrin, E.; Maget, P.; Mayorat, M.L.; Mazon, D.; Sarazin, Y. [JET Abingdon, Oxfordshire (United Kingdom); Voitsekhovitch, I. [Universite de Provence, LPIIM, Aix-Marseille 1, 13 (France)

    2000-03-01

    This report summarises the profile control studies, i.e. preparation and analysis of JET Optimised Shear plasmas, carried out during the year 1999 within the framework of the Task-Agreement (RF/CEA/02) between JET and the Association Euratom-CEA/Cadarache. We report on our participation in the preparation of the JET Optimised Shear experiments together with their comprehensive analyses and the modelling. Emphasis is put on the various aspects of pressure profile control (core and edge pressure) together with detailed studies of current profile control by non-inductive means, in the prospects of achieving steady, high performance, Optimised Shear plasmas. (authors)

  12. Will it Ever be Possible to Profile the Terrorist?

    Directory of Open Access Journals (Sweden)

    Jonathan A Rae

    2012-09-01

    Full Text Available 'This paper critiques the claim that terrorists can be profiled – that is to say that terrorists possess distinguishable attributes that can be conceivably identified by an observer. In doing so, the most prominent profiling parameters - racial, gender, age, pathological, psychological and socioeconomic – are investigated. The above approaches are found to have little to no applied value in identifying terrorists from a societal population. The dominant criticisms of these methods emphasise their crude reductionism, an absence of internal and external validity, and their lack of practical application. Current evidence indicates that the profiling of terrorists is a futile venture.'

  13. On current trace problem

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The pricing of electricity trasmission requires determining how much use each generator is making of a transmission line and what is each generator's contribution to the system losses. Such problems cannot be solved by only using Kirchoff's laws. This paper proposes two current decomposition axioms based on which the theories and models are established for the current trace problem. To create an efficient algorithm the graph theory is employed. It is proved that there is no directed circuit in a directed current distribution graph. According to this theorem a very simple and efficient algorithm based on recursive elimination process is suggested. A simple example is used to explain the algorithm.

  14. High current regimes in RFX-mod

    Science.gov (United States)

    Valisa, M.; Bolzonella, T.; Buratti, P.; Carraro, L.; Cavazzana, R.; Dal Bello, S.; Martin, P.; Pasqualotto, R.; Sarff, J. S.; Spolaore, M.; Zanca, P.; Zanotto, L.; Agostini, M.; Alfier, A.; Antoni, V.; Apolloni, L.; Auriemma, F.; Barana, O.; Baruzzo, M.; Bettini, P.; Bonfiglio, D.; Bonomo, F.; Brombin, M.; Buffa, A.; Canton, A.; Cappello, S.; Cavinato, M.; Chitarin, G.; DeLorenzi, A.; DeMasi, G.; Escande, D. F.; Fassina, A.; Franz, P.; Gaio, E.; Gazza, E.; Giudicotti, L.; Gnesotto, F.; Gobbin, M.; Grando, L.; Guazzotto, L.; Guo, S. C.; Igochine, V.; Innocente, P.; Lorenzini, R.; Luchetta, A.; Manduchi, G.; Marchiori, G.; Marcuzzi, D.; Marrelli, L.; Martini, S.; Martines, E.; McCollam, K.; Milani, F.; Moresco, M.; Novello, L.; Ortolani, S.; Paccagnella, R.; Peruzzo, S.; Piovan, R.; Piron, L.; Pizzimenti, A.; Piovesan, P.; Pomaro, N.; Predebon, I.; Puiatti, M. E.; Rostagni, G.; Sattin, F.; Scarin, P.; Serianni, G.; Sonato, P.; Spada, E.; Soppelsa, A.; Spagnolo, S.; Spizzo, G.; Taliercio, C.; Terranova, D.; Toigo, V.; Vianello, N.; Yadikin, D.; Zaccaria, P.; Zaniol, B.; Zilli, E.; Zuin, M.

    2008-12-01

    Optimization of machine operation, including plasma position control, density control and especially feedback control on multiple magnetohydrodynamic modes, has led RFX-mod to operate reliably at 1.5 MA, the highest current ever achieved on a reversed field pinch (RFP). At high current and low density the magnetic topology spontaneously self-organizes in an Ohmical helical symmetry, with the new magnetic axis helically twisting around the geometrical axis of the torus. The separatrix of the island disappears leaving a wide and symmetric thermal structure with large gradients in the electron temperature profile. The new topology still displays an intermittent nature but its overall presence has reached 85% of the current flat-top period. The large gradients in the electron temperature profile appear to be marginal for the destabilization of ion temperature gradient modes on the assumption that ions and electrons have the same gradients. There are indications that higher currents could provide the conditions under which to prove the existence of a true helical equilibrium as the standard RFP configuration.

  15. Water Current Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Tidal, river and ocean current observations collected by the U.S. Coast and Geodetic Survey. Period of record is late 1800s to mid-1980s.

  16. Prognosis - Cancer Currents Blog

    Science.gov (United States)

    A catalog of posts from NCI’s Cancer Currents blog on research related to cancer prognosis. Includes posts on factors that influence prognosis, prognostic biomarkers, and doctor-patient communications about prognosis.

  17. NOAA NDBC SOS - currents

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA NDBC SOS server is part of the IOOS DIF SOS Project. The stations in this dataset have currents data. Because of the nature of SOS requests, requests for...

  18. AUTO FIB Current Status

    Science.gov (United States)

    Parry, I.; Sharples, R. M.

    The current status of the automated fibre positioner, Autofib, is reviewed including the positioning performance and the set-up speed. Future plans to build another Autofib for the 4.2 m William Herschel Telescope are also briefly discussed.

  19. Electrifying Current Events.

    Science.gov (United States)

    Smith, Philip

    1980-01-01

    The author describes how he has adapted the television quiz show format of "College Bowl" to current events study for junior high school students. An insert explains use of the same technique with fourth graders. (SJL)

  20. Geothermal Energy: Current abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Ringe, A.C. (ed.)

    1988-02-01

    This bulletin announces the current worldwide information available on the technologies required for economic recovery of geothermal energy and its use as direct heat or for electric power production. (ACR)