Sample records for current measurement device

  1. Simulation of leakage current measurement on medical devices using helmholtz coil configuration with different current flow (United States)

    Sutanto, E.; Chandra, F.; Dinata, R.


    Leakage current measurement which can follow IEC standard for medical device is one of many challenges to be answered. The IEC 60601-1 has defined that the limit for a leakage current for Medical Device can be as low as 10 µA and as high as 500 µA, depending on which type of contact (applied part) connected to the patient. Most people are using ELCB (Earth-leakage circuit breaker) for safety purpose as this is the most common and available safety device in market. One type of ELCB devices is RCD (Residual Current Device) and this RCD type can measure the leakage current directly. This work will show the possibility on how Helmholtz Coil Configuration can be made to be like the RCD. The possibility is explored by comparing the magnetic field formula from each device, then it proceeds with a simulation using software EJS (Easy Java Simulation). The simulation will make sure the concept of magnetic field current cancellation follows the RCD concept. Finally, the possibility of increasing the measurement’s sensitivity is also analyzed. The sensitivity is needed to see the possibility on reaching the minimum leakage current limit defined by IEC, 0.01mA.

  2. Classification of methods for measuring current-voltage characteristics of semiconductor devices

    Directory of Open Access Journals (Sweden)

    Iermolenko Ia. O.


    Full Text Available It is shown that computer systems for measuring current-voltage characteristics are very important for semiconductor devices production. The main criteria of efficiency of such systems are defined. It is shown that efficiency of such systems significantly depends on the methods for measuring current-voltage characteristics of semiconductor devices. The aim of this work is to analyze existing methods for measuring current-voltage characteristics of semiconductor devices and to create the classification of these methods in order to specify the most effective solutions in terms of defined criteria. To achieve this aim, the most common classifications of methods for measuring current-voltage characteristics of semiconductor devices and their main disadvantages are considered. Automated and manual, continuous, pulse, mixed, isothermal and isodynamic methods for measuring current-voltage characteristics are analyzed. As a result of the analysis and generalization of existing methods the next classification criteria are defined: the level of automation, the form of measurement signals, the condition of semiconductor device during the measurements, and the use of mathematical processing of the measurement results. With the use of these criteria the classification scheme of methods for measuring current-voltage characteristics of semiconductor devices is composed and the most effective methods are specified.

  3. Eddy current nondestructive testing device for measuring variable characteristics of a sample utilizing Walsh functions (United States)

    Libby, Hugo L.; Hildebrand, Bernard P.


    An eddy current testing device for measuring variable characteristics of a sample generates a signal which varies with variations in such characteristics. A signal expander samples at least a portion of this generated signal and expands the sampled signal on a selected basis of square waves or Walsh functions to produce a plurality of signal components representative of the sampled signal. A network combines these components to provide a display of at least one of the characteristics of the sample.

  4. Emission rate measuring device (United States)

    Luckat, S.


    The development and application of an emission rate measuring device for gaseous components is explored. The device contains absorption fluid from a supply container that moistens a cylindrical paper sleeve. A newer model is provided with a direct current motor requiring less electricity than an older model. The hose pump is modified to avoid changing it and the filter sleeve is fastened more securely to the distributor head. Application of the measuring devices is discussed, particularly at the Cologne Cathedral, where damage to the stone is observed.

  5. Simultaneous optical losses and current measurements in photovoltaic devices at variable angle of the incident light

    Energy Technology Data Exchange (ETDEWEB)

    Maddalena, P.; Tortora, P. [Universita di Napoli ' Frederico II' , Napoli (Italy). INFM, Dipartimento di Scienze Fisiche; Parretta, A. [Centro Ricerche ENEA, Portici (Italy); Altermatt, P.; Zhao, J. [University of New South Wales, Sydney (Australia). Photovoltaic Special Research Centre


    In this work, the apparatus and the method for a simultaneous measurement of the optical losses and short-circuit current in a solar cell, at variable incidence angle of the light, is presented. The method has been applied to an n{sup +}/p c-Si cell with a polished surface. The investigation has been performed over an angular range from 8{sup o} to 80{sup o}, using a linearly polarized laser beam, either normally or parallelly polarized with respect to the incidence plane. The experimental curves of reflectance seem to be in a good agreement with the theoretical ones derived from the Fresnel equations. Since the measurements are performed inside an integrating sphere, a procedure has been developed to derive, from the total current I{sup tot}, the calculated direct one, I{sub dirCal} excluding contributions from the incoming light back-diffused to the cell under investigation; the results are compared with real direct-current measurement. Since with the proposed method both reflectance and current are measured for the same surface region and under identical illumination conditions, the results have been combined to get the internal spectral response of the n{sup +}/p c-Si polished surface solar cell. (author)

  6. "Centripede"-measuring device

    CERN Multimedia

    CERN PhotoLab


    "Centripede"-measuring device for the geometrical pole shape of the quadrupoles, developed by the electronics and mechanics section of the Survey Group. The black box contains a precision clinometer, which gives the transversal tilt of the reference plane.

  7. A simple device for measuring the minimum current velocity to maintain semi-buoyant fish eggs in suspension (United States)

    Mueller, Julia S.; Cheek, Brandon D.; Chen, Qingman; Groeschel, Jillian R.; Brewer, Shannon K.; Grabowski, Timothy B.


    Pelagic broadcast spawning cyprinids are common to Great Plains rivers and streams. This reproductive guild produces non-adhesive semi-buoyant eggs that require sufficient current velocity to remain in suspension during development. Although studies have shown that there may be a minimum velocity needed to keep the eggs in suspension, this velocity has not been estimated directly nor has the influence of physicochemical factors on egg buoyancy been determined. We developed a simple, inexpensive flow chamber that allowed for evaluation of minimum current velocity needed to keep semi-buoyant eggs in suspension at any time frame during egg development. The device described here has the capability of testing the minimum current velocity needed to keep semi-buoyant eggs in suspension at a wide range of physicochemical conditions. We used gellan beads soaked in freshwater for 0, 24, and 48 hrs as egg surrogates and evaluated minimum current velocities necessary to keep them in suspension at different combinations of temperature (20.0 ± 1.0° C, 25.0 ± 1.0° C, and 28.0 ± 1.0° C) and total dissolved solids (TDS; 1,000 mg L-1, 3,000 mg L-1, and 6,000 mg L-1). We found that our methodology generated consistent, repeatable results within treatment groups. Current velocities ranging from 0.001–0.026 needed to keep the gellan beads in suspension were negatively correlated to soak times and TDS and positively correlated with temperature. The flow chamber is a viable approach for evaluating minimum current velocities needed to keep the eggs of pelagic broadcast spawning cyprinids in suspension during development.

  8. Current measurement apparatus (United States)

    Umans, Stephen D.


    Apparatus and methods are provided for a system for measurement of a current in a conductor such that the conductor current may be momentarily directed to a current measurement element in order to maintain proper current without significantly increasing an amount of power dissipation attributable to the current measurement element or adding resistance to assist in current measurement. The apparatus and methods described herein are useful in superconducting circuits where it is necessary to monitor current carried by the superconducting elements while minimizing the effects of power dissipation attributable to the current measurement element.

  9. A device for measuring electron beam characteristics

    Directory of Open Access Journals (Sweden)

    M. Andreev


    Full Text Available This paper presents a device intended for diagnostics of electron beams and the results obtained with this device. The device comprises a rotating double probe operating in conjunction with an automated probe signal collection and processing system. This provides for measuring and estimating the electron beam characteristics such as radius, current density, power density, convergence angle, and brightness.

  10. Electronic Voltage and Current Transformers Testing Device

    Directory of Open Access Journals (Sweden)

    Yong Xiao


    Full Text Available A method for testing electronic instrument transformers is described, including electronic voltage and current transformers (EVTs, ECTs with both analog and digital outputs. A testing device prototype is developed. It is based on digital signal processing of the signals that are measured at the secondary outputs of the tested transformer and the reference transformer when the same excitation signal is fed to their primaries. The test that estimates the performance of the prototype has been carried out at the National Centre for High Voltage Measurement and the prototype is approved for testing transformers with precision class up to 0.2 at the industrial frequency (50 Hz or 60 Hz. The device is suitable for on-site testing due to its high accuracy, simple structure and low-cost hardware.

  11. High Precision Current Measurement for Power Converters

    CERN Document Server

    Cerqueira Bastos, M


    The accurate measurement of power converter currents is essential to controlling and delivering stable and repeatable currents to magnets in particle accelerators. This paper reviews the most commonly used devices for the measurement of power converter currents and discusses test and calibration methods.

  12. SBC Dark Current Measurement (United States)

    Ogaz, Sara


    This takes a series of SBC dark measurements over a continuous period of about 6 hours {4 orbits}. The aim is to collect dark images during an extended SBC on-time. Earlier measurements indicate that the dark current increases with SBC on-time and may also be increasing with overall SBC use. The 6-hour time matches the longest time used by any observer. As with all SBC observations this needs continuous SAA free time.This program is executed once per cycle. The last exposures were taken in Mar 2013 under Program 13161.

  13. Sensitive beam current measurement for FAIR

    Energy Technology Data Exchange (ETDEWEB)

    Schwickert, Marcus; Kurian, Febin; Reeg, Hansjoerg [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Seidel, Paul; Neubert, Ralf [Friedrich-Schiller-Universitaet Jena (Germany); Geithner, Rene; Vodel, Wolfgang [Helmholtz-Institut Jena (Germany)


    Presently FAIR, the Facility for Antiproton and Ion Research, entered the final planning phase at GSI. The new accelerator facility requires precise devices for beam current measurements due to the large dynamics in beam intensities for the various synchrotrons, transport lines and storage rings. We report on the actual developments of beam diagnostic devices for the measurement of beam intensities ranging from 5 x 10{sup 11} uranium ions down to the detection of less than 10{sup 4} antiprotons. This contribution gives an overview of the planned instruments with a focus on non-intercepting beam current transformers, and summarizes the on-going development of a cryogenic current comparator.

  14. The Biopotentials and Measuring Devices

    Directory of Open Access Journals (Sweden)

    Mustafa Guven


    Full Text Available Many organs in the human body, produces many different types of the electric activity, such as the muscle groups, heart, brain and eyes. These electric activities are also called biopotentials. Measurement of the biopotentials from the human body can indicated vital clues as to normal or pathological functions of the organs. Biopotential signals are small in amplitude and consists of very low frequencies. Therefore, the signals need to be amplified and filtered to make them compatible with devices such as displays, recorders, or analog to digital converters for computerized equipment. In addition, biopotential measurements are corrupted by environmental and biological sources of interference. Amplifiers and filters adequate to measure these signals have to satisfy very specific requirements. This study reviews the origins, acuisition of biopotentials, and design of the medical instruments used in biopotential measurement. [Archives Medical Review Journal 2012; 21(3.000: 174-188

  15. Weak Values from Displacement Currents in Multiterminal Electron Devices (United States)

    Marian, D.; Zanghı, N.; Oriols, X.


    Weak values allow the measurement of observables associated with noncommuting operators. Up to now, position-momentum weak values have been mainly developed for (relativistic) photons. In this Letter, a proposal for the measurement of such weak values in typical electronic devices is presented. Inspired by the Ramo-Shockley-Pellegrini theorem that provides a relation between current and electron velocity, it is shown that the displacement current measured in multiterminal configurations can provide either a weak measurement of the momentum or strong measurement of position. This proposal opens new opportunities for fundamental and applied physics with state-of-the-art electronic technology. As an example, a setup for the measurement of the Bohmian velocity of (nonrelativistic) electrons is presented and tested with numerical experiments.

  16. Autonomous Method and System for Minimizing the Magnitude of Plasma Discharge Current Oscillations in a Hall Effect Plasma Device (United States)

    Hruby, Vladimir (Inventor); Demmons, Nathaniel (Inventor); Ehrbar, Eric (Inventor); Pote, Bruce (Inventor); Rosenblad, Nathan (Inventor)


    An autonomous method for minimizing the magnitude of plasma discharge current oscillations in a Hall effect plasma device includes iteratively measuring plasma discharge current oscillations of the plasma device and iteratively adjusting the magnet current delivered to the plasma device in response to measured plasma discharge current oscillations to reduce the magnitude of the plasma discharge current oscillations.

  17. HLS bunch current measurement system

    Institute of Scientific and Technical Information of China (English)


    Bunch current is an important parameter for studying the injection fill-pattern in the storage ring and the instability threshold of the bunch, and the bunch current monitor also is an indispensable tool for the top-up injection. A bunch current measurement (BCM) system has been developed to meet the needs of the upgrade project of Hefei Light Source (HLS). This paper presents the layout of the BCM system. The system based on a high-speed digital oscilloscope can be used to measure the bunch current and synchronous phase shift. To obtain the absolute value of bunch-by-bunch current, the calibration coefficient is measured and analyzed. Error analysis shows that the RMS of bunch current is less than 0.01 mA when bunch current is about 5 mA, which can meet project requirement.

  18. Medical devices for the anesthetist: current perspectives

    Directory of Open Access Journals (Sweden)

    Ingrande J


    Full Text Available Jerry Ingrande, Hendrikus JM LemmensDepartment of Anesthesiology, Perioperative and Pain Medicine, Stanford University School of Medicine, Stanford, CA, USAAbstract: Anesthesiologists are unique among most physicians in that they routinely use technology and medical devices to carry out their daily activities. Recently, there have been significant advances in medical technology. These advances have increased the number and utility of medical devices available to the anesthesiologist. There is little doubt that these new tools have improved the practice of anesthesia. Monitoring has become more comprehensive and less invasive, airway management has become easier, and placement of central venous catheters and regional nerve blockade has become faster and safer. This review focuses on key medical devices such as cardiovascular monitors, airway equipment, neuromonitoring tools, ultrasound, and target controlled drug delivery software and hardware. This review demonstrates how advances in these areas have improved the safety and efficacy of anesthesia and facilitate its administration. When applicable, indications and contraindications to the use of these novel devices will be explored as well as the controversies surrounding their use.Keywords: catheters, echocardiography, ultrasound, fiberoptic bronchoscope, laryngeal mask airway, closed-loop anesthesia

  19. Device and method for measuring biomarkers

    NARCIS (Netherlands)

    Wiedemair, Justyna; Olthuis, Wouter; van den Berg, Albert


    The invention relates to a device for the measurement of hydrogen peroxide and optionally other biomarkers in a gaseous mixture, and in particular to a microfabricated device. The device comprises hydrogen peroxide capturing means and an electromechanical sensor comprising a sensing element in

  20. Device and method for measuring biomarkers

    NARCIS (Netherlands)

    Wiedemair, Justyna; Olthuis, Wouter; van den Berg, Albert


    The invention relates to a device for the measurement of hydrogen peroxide and optionally other biomarkers in a gaseous mixture, and in particular to a microfabricated device. The device comprises hydrogen peroxide capturing means and an electromechanical sensor comprising a sensing element in

  1. Device for measuring flow of wet steam

    Energy Technology Data Exchange (ETDEWEB)

    Turchaninov, Yu.N.; Dichenko, M.A.; Irodenko, V.V.; Nikiforov, Yu.V.; Vestelesnyy, A.G.


    A device is proposed for measuring the flow of wet steam into productive beds of injection wells during thermal modification. It contains a housing with measurement channel, straightblade blade wheel installed on the shaft and electric motor; rotor of the electric motor is arranged on the blade wheel, and the stator of the housing. The device guarantees the possibility of measuring flow in the well with the use of a flexible cable suspension. For this purpose it is equipped with an inertia brake arranged on one end of the housing made in the form of a bushing freely installed in the housing with pins. On the pins there are spring-loaded brake shoes interacting with the supports attached to the housing. In order to improve transverse stability of the housing, the device is equipped with an additional inertia brake installed on the other end of the housing, and in order to guarantee packing of the well, an initial inertia brake installed under the first with shifting in relation to the axis to cover by the brake shoes the section of the well. After lowering of the flow meter into the well to the required depth, an electrical current is fed into the winding of the electric motor on the cable; the blade wheel begins to turn, simultaneously on the stator attached in the instrument housing a reactive rotating momentum develops. The housing sharply turns to the side opposite the direction of rotation of the blade wheel, the brake shoes are separated up to the support in the well wall. The flow of controllable medium loads the electric motor rotating the blade wheel by the momentum of resistance to rotation that is proportional to mass flow. The magnitude of the momentum (flow) is judged from the magnitude of consumed current.

  2. Electronic measurements of ionization currents

    Energy Technology Data Exchange (ETDEWEB)

    Hutyra, F.; Knapp, K.; Gregor, J. (Tesla, Premysleni (Czechoslovakia). Vyzkumny Ustav Pristroju Jaderne Techniky)


    Measurements are discussed of very low currents from ionization chambers. The currents range between 10/sup -15/ and 10/sup -9/ A. Two methods are discussed. A description is given of a dynamic and a semiconductor electrometers. Both meters are parts of dosimetric instruments for monitoring the dose rate (NB 9201) and the neutron-gamma mixed radiation dose rate (NDK 601).

  3. Device Measures Angle Of Deployment (United States)

    Jermakian, Joel B.


    Simple electromechanical device indicates angular position of unfolding panel during and after deployment. Resistance of potentiometer gradually increases as unfolding of solar panel about hinge moves wiper of potentiometer. At full deployment, panel pushes and opens normally closed switch. Designed for use on panel of solar photovoltaic cells in spacecraft, modified for use in other, similar position-indicating applications.

  4. Zero G Mass Measurement Device (ZGMMD) Project (United States)

    National Aeronautics and Space Administration — The Zero Gravity Mass Measurement Device (ZGMMD) provides the ability to measure the mass of samples in a microgravity environment, like that found on the...

  5. Ambulatory blood pressure measuring devices. (United States)

    Krönig, B


    During the last 6 years ABPM has become a widely used method in the diagnosis and treatment of hypertensive patients as well as in correlating the disease to prognosis. Up to January 1995, the international market offered 43 devices from 31 manufacturers. In Germany there are 18 devices available on the market from 10 different manufactures. Mainly, two different techniques are applied, ausculation and oscillometry, each having some advantages and disadvantages: The oscillometric technique may be preferable in patients with hyperkinetic circulation (e.g., pregnancy), with ausculatory gap and when surrounding noises are interfering, whereas the auscultatory technique, being the original method, has some advantages in patients with dysrhythmias and atrial fibrillation, as well as in dynamic (bicycle) exercise. The auscultatory method may be optimized by using ECG-, respectively oscillometric gating. The future development, which has already been realized in seven international recorders, offers the opportunity of either using auscultatory and/or oscillometric techniques during the same recording. To estimate the "true" sleeping interval more precisely a "day-night-button" at the recorder side is helpful. Furthermore, an uniform computer printout of the mean values of day- and night-time intervals, together with the widely approved limits of normotension should be achieved; last, but not least, an important factor for the widespread use of ABPM in general practice, as well as in the hospital, will be the prices of the recorders. Which have been reduced to about DM 3000-6000 in Germany (January 1996).

  6. Measurement-device-independent quantum digital signatures (United States)

    Puthoor, Ittoop Vergheese; Amiri, Ryan; Wallden, Petros; Curty, Marcos; Andersson, Erika


    Digital signatures play an important role in software distribution, modern communication, and financial transactions, where it is important to detect forgery and tampering. Signatures are a cryptographic technique for validating the authenticity and integrity of messages, software, or digital documents. The security of currently used classical schemes relies on computational assumptions. Quantum digital signatures (QDS), on the other hand, provide information-theoretic security based on the laws of quantum physics. Recent work on QDS Amiri et al., Phys. Rev. A 93, 032325 (2016);, 10.1103/PhysRevA.93.032325 Yin, Fu, and Zeng-Bing, Phys. Rev. A 93, 032316 (2016), 10.1103/PhysRevA.93.032316 shows that such schemes do not require trusted quantum channels and are unconditionally secure against general coherent attacks. However, in practical QDS, just as in quantum key distribution (QKD), the detectors can be subjected to side-channel attacks, which can make the actual implementations insecure. Motivated by the idea of measurement-device-independent quantum key distribution (MDI-QKD), we present a measurement-device-independent QDS (MDI-QDS) scheme, which is secure against all detector side-channel attacks. Based on the rapid development of practical MDI-QKD, our MDI-QDS protocol could also be experimentally implemented, since it requires a similar experimental setup.

  7. Interoperability of wearable cuffless BP measuring devices. (United States)

    Liu, Jing; Zhang, Yuan-Ting


    While a traditional cuff-based Blood Pressure (BP) measuring device can only take a snap shot of BP, real-time and continuous measurement of BP without an occluding cuff is preferred which usually use the pulse transit time (PTT) in combination with other physiological parameters to estimate or track BP over a certain period of time after an initial calibration. This article discusses some perspectives of interoperability of wearable medical devices, based on IEEE P1708 draft standard that focuses on the objective performance evaluation of wearable cuffless BP measuring devices. The ISO/IEEE 11073 family of standards, supporting the plug-and play feature, is intended to enable medical devices to interconnect and interoperate with other medical devices and with computerized healthcare information systems in a manner suitable for the clinical environment. In this paper, the possible adoption of ISO/IEEE 11073 for the interoperability of wearable cuffless BP devices is proposed. In the consideration of the difference of the continuous and cuffless BP measuring methods from the conventional ones, the existing device specialization standards of ISO/IEEE 11073 cannot be directly followed when designing the cuffless BP device. Specifically, this paper discusses how the domain information model (DIM), in which vital sign information is abstracted as objects, is used to structure the information about the device and that generated from the device. Though attention should also be paid to adopt the communication standards for other parts for the communication system, applying communication standards that enable plug-and-play feature allows achieving the interoperability of different cuffless BP measuring devices with possible different configurations.

  8. Vacuum measurement on vacuum packaged MEMS devices

    Energy Technology Data Exchange (ETDEWEB)

    Gan Zhiyin; Lin Dong; Wang Xuefang; Chenggang; Zhang Honghai; Liu Sheng [Institute of Microsystems and Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, China, 430074 (China)


    This paper investigates the relationship between the resonance impedance of a tuning fork quartz oscillator and the small size cavity vacuum pressure and develops an on-line vacuum measurement system to track real-time vacuum pressure in MEMS devices. Furthermore, authors completely analyze all facts that affect the resonance impedance. A set of metal vacuum packaged devices have been monitored for more than 10 months using this on-line vacuum measurement system. The results indicate that it is very critical to investigate vacuum packaging processes, reliability and durability of the vacuum devices by using this on-line vacuum measurement system.

  9. 21 CFR 886.1450 - Corneal radius measuring device. (United States)


    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Corneal radius measuring device. 886.1450 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1450 Corneal radius measuring device. (a) Identification. A corneal radius measuring device is an AC-powered device intended to...

  10. Zero G Mass Measurement Device (ZGMMD) Project (United States)

    National Aeronautics and Space Administration — The Zero G Mass Measurement Device (ZGMMD) will provide the ability to quantify the mass of objects up to 2,000 grams, including live animal specimens in a zero G...

  11. Heat generation by electric current in mesoscopic devices


    Sun, Qing-Feng; Xie, X. C.


    We study the heat generation in a nano-device with an electric current passing through the device. For the first time, a general formula for the heat generation is derived by using the nonequilibrium Keldysh Green functions. This formula can be applied in both the linear and nonlinear transport regions, for time-dependent systems, and with multi-terminal devices. The formula is also valid when the nano-device contains various interactions. As an application of the formula, the heat generation...

  12. Dark Current Measurements in GIF++

    CERN Document Server

    Al-Qahtani, Abdulaziz


    This project revolved around creating a code that treats experiment files in order to fetch dark current measurements done for the Cathode Strip Chambers (CSC) exposed to long-term irradiation at Gamma Irradiation Facility (GIF++) and plot the results as functions of the accumulated charge. This paper will discuss the Compact Muon Solenoid (CMS) experiment, the CSCs that we have looked at (specifically the muon detectors located at the CMS endcaps), longevity test at GIF++, and finally discuss the code and results obtained.

  13. Persistent spin current in nano-devices and definition of the spin current


    Sun, Qing-feng; Xie, X. C.; WANG Jian


    We investigate two closely related subjects: (i) existence of a pure persistent spin current in semiconducting mesoscopic device with a spin-orbit interaction's (SOI), and (ii) the definition of the spin current in the presence of SOI. Through physical argument from four physical pictures in different aspects, we provide strong evidences that the persistent spin current does exist in a device with SOI in the absence of any magnetic materials. This persistent spin current is an analog of the p...

  14. Calibration of imaging luminance measuring devices (ILMD) (United States)

    Liu, Liying; Zheng, Feng; Zhu, Lingxi; Li, Ye; Huan, Kewei; Shi, Xiaoguang


    A method of calibration of imaging luminance measuring devices has been studied. By the device-independent color space transformation, the color image by digital camera could be converted to the CIE's absolute color space lab. Then, the calibration model is fitted between ln(L/t) and luminance. At last, luminance image is obtained and the dynamic range of luminance image could be adjusted by shutter speed.

  15. Low-cost optoelectronic devices to measure velocity of detonation (United States)

    Chan, Edwin M.; Lee, Vivian; Mickan, Samuel P.; Davies, Phil J.


    Velocity of Detonation (VoD) is an important measured characteristic parameter of explosive materials. When new explosives are developed, their VoD must be determined. Devices used to measure VoD are always destroyed in the process, however replacing these devices represents a considerable cost in the characterisation of new explosives. This paper reports the design and performance of three low-cost implementations of a point-to-point VoD measurement system, two using optical fibre and a third using piezoelectric polymers (PolyVinyliDine Flouride, PVDF). The devices were designed for short charges used under controlled laboratory conditions and were tested using the common explosive 'Composition B'. These new devices are a fraction of the cost of currently available VoD sensors and show promise in achieving comparable accuracy. Their future development will dramatically reduce the cost of testing and aid the characterisation of new explosives.

  16. Computational device design: measuring esophageal distensibility using EndoFLIP (United States)

    Acharya, Shashank; Kou, Wenjun; Kahrilas, Peter J.; Pandolfino, John E.; Patankar, Neelesh A.


    Characterizing the strength of sphincters in the human body is valuable from a diagnostic and surgical standpoint. We develop a numerical model for the EndoFLIP device (Endolumenal Functional Lumen Imaging Probe) that is crucial to the biomechanical study of the Lower Esophageal Sphincter (LES). The simulations demonstrate how the device operates in vivo. From this model, we suggest additional use cases for the device that can give insight into the state of the esophageal wall. Currently, the device measures a single steady quantity (distensibility) that is calculated from pressure and area. Our analysis shows that by capturing and analyzing spatio-temporal pressure variations during peristalsis, the effectiveness of the contractions and health of the surrounding tissue can be quantified. Furthermore, there is an opportunity to validate tissue models by comparing dilation results with clinical data from the device. This work is supported by the Cabell Fellowship at Northwestern Unviersity.

  17. Microstructure cantilever beam for current measurement

    Directory of Open Access Journals (Sweden)

    M.T.E. Khan


    Full Text Available Most microelectromechanical systems (MEMS sensors are based on the microcantilever technology, which uses a broad range of design materials and structures. The benefit ofMEMStechnology is in developing devices with a lower cost, lower power consumption, higher performance and greater integration. A free-end cantilever beam with a magnetic material mass has been designed using MEMS software tools. The magnetic material was used to improve the sensitivity of the cantilever beam to an externally-applied magnetic field. The cantilever was designed to form a capacitance transducer, which consisted of variable capacitance where electrical and mechanical energies were exchanged. The aim of this paper was to analyse the system design of the microcantilever when subjected to a magnetic field produced by a current-carrying conductor. When the signal, a sinusoidal current with a constant frequency, was applied, the cantilever beam exhibited a vibration motion along the vertical axis when placed closer to the line current. This motion created corresponding capacitance changes and generated a voltage output proportional to the capacitive change in the signal-processing circuitry attached to the microcantilever. The equivalent massspring system theory was used to describe and analyse the effect of the natural frequency of the system vibrations and motion due to the applied magnetic field, in a single-degree of freedom. The main application of this microcantilever is in current measurements to develop a non-contact current sensor mote.

  18. Measuring ionizing radiation with a mobile device (United States)

    Michelsburg, Matthias; Fehrenbach, Thomas; Puente León, Fernando


    In cases of nuclear disasters it is desirable to know one's personal exposure to radioactivity and the related health risk. Usually, Geiger-Mueller tubes are used to assess the situation. Equipping everyone with such a device in a short period of time is very expensive. We propose a method to detect ionizing radiation using the integrated camera of a mobile consumer device, e.g., a cell phone. In emergency cases, millions of existing mobile devices could then be used to monitor the exposure of its owners. In combination with internet access and GPS, measured data can be collected by a central server to get an overview of the situation. During a measurement, the CMOS sensor of a mobile device is shielded from surrounding light by an attachment in front of the lens or an internal shutter. The high-energy radiation produces free electrons on the sensor chip resulting in an image signal. By image analysis by means of the mobile device, signal components due to incident ionizing radiation are separated from the sensor noise. With radioactive sources present significant increases in detected pixels can be seen. Furthermore, the cell phone application can make a preliminary estimate on the collected dose of an individual and the associated health risks.

  19. Coherence measurement with digital micromirror device. (United States)

    Partanen, Henri; Turunen, Jari; Tervo, Jani


    We measure the complex-valued spatial coherence function of a multimode broad-area laser diode using Young's classical double slit experiment realized with a digital micromirror device. We use this data to construct the coherent modes of the beam and to simulate its propagation before and after the measurement plane. When comparing the results to directly measured intensity profiles, we find excellent correspondence to the extent that even small details of the beam can be predicted. We also consider the number of measurement points required to model the beam with sufficient accuracy.

  20. Pressure measurements in magnetic-fusion devices

    Energy Technology Data Exchange (ETDEWEB)

    Dylla, H.F.


    Accurate pressure measurements are important in magnetic fusion devices for: (1) plasma diagnostic measurements of particle balance and ion temperature; (2) discharge cleaning optimization; (3) vacuum system performance; and (4) tritium accountability. This paper reviews the application, required accuracy, and suitable instrumentation for these measurements. Demonstrated uses of ionization-type and capacitance-diaphragm gauges for various pressure and gas-flow measurements in tokamaks are presented, with specific reference to the effects of magnetic fields on gauge performance and the problems associated with gauge calibration.

  1. Method and device for current driven electric energy conversion

    DEFF Research Database (Denmark)


    configurations such as half bridge buck, full bridge buck, half bridge boost, or full bridge boost. A current driven conversion is advantageous for high efficient energy conversion from current sources such as solar cells or where a voltage source is connected through long cables, e.g. powerline cables for long......Device comprising an electric power converter circuit for converting electric energy. The converter circuit comprises a switch arrangement with two or more controllable electric switches connected in a switching configuration and controlled so as to provide a current drive of electric energy from...... the output from the switch arrangement and designed such that a high impedance at a frequency range below the switching frequency is obtained, seen from the output terminals. Switches implemented by normally-on-devices are preferred, e.g. in the form of a JFET. The converter circuit may be in different...

  2. Mapping the ion current distribution in nanopore/electrode devices. (United States)

    Rutkowska, Agnieszka; Edel, Joshua B; Albrecht, Tim


    Solid-state nanopores with integrated electrodes have interesting prospects in next-generation single-molecule biosensing and sequencing. These include "gated" nanopores with a single electrode integrated into the membrane, as well as two-electrode designs, such as a transversal tunneling junction. Here we report the first comprehensive analysis of current flow in a three-electrode device as a model for this class of sensors. As a new feature, we observe apparent rectification in the pore current that is rooted in the current distribution of the cell, rather than the geometry or electrostatics of the pore. We benchmark our results against a recently developed theoretical model and define operational parameters for nanopore/electrode structures. Our findings thus facilitate the rational design of such sensor devices.

  3. Secondary electron current loss in electron cooling devices (United States)

    Sharapa, A. N.; Shemyakin, A. V.


    The efficiency of secondary electron capture in a recuperator with a longitudinal magnetic field is evaluated. To characterize this efficiency, the value of the collector secondary emission coefficient is introduced, for the calculation of which a simple formula is proposed. The effects determining the difference between the current losses in straight systems and devices with bending magnets are analyzed. It is experimentally shown that there is no unambiguous relation between the efficiency of the secondary electron capture by the collector and the current loss. The mechanism which determines the current loss in straight systems is suggested.

  4. Improvised explosive devices: pathophysiology, injury profiles and current medical management. (United States)

    Ramasamy, A; Hill, A M; Clasper, J C


    The improvised explosive device (IED), in all its forms, has become the most significant threat to troops operating in Afghanistan and Iraq. These devices range from rudimentary home made explosives to sophisticated weapon systems containing high-grade explosives. Within this broad definition they may be classified as roadside explosives and blast mines, explosive formed pojectile (EFP) devices and suicide bombings. Each of these groups causeinjury through a number of different mechanisms and can result in vastly different injury profiles. The "Global War on Terror" has meant that incidents which were previously exclusively seen in conflict areas, can occur anywhere, and clinicians who are involved in emergency trauma care may be required to manage casualties from similar terrorist attacks. An understanding of the types of devices and their pathophysiological effects is necessary to allow proper planning of mass casualty events and to allow appropriate management of the complex poly-trauma casualties they invariably cause. The aim of this review article is to firstly describe the physics and injury profile from these different devices and secondly to present the current clinical evidence that underpins their medical management.

  5. Eddy current thickness measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Rosen, Gary J.; Sinclair, Frank; Soskov, Alexander; Buff, James S.


    A sheet of a material is disposed in a melt of the material. The sheet is formed using a cooling plate in one instance. An exciting coil and sensing coil are positioned downstream of the cooling plate. The exciting coil and sensing coil use eddy currents to determine a thickness of the solid sheet on top of the melt.

  6. Digital Camera as Gloss Measurement Device

    Directory of Open Access Journals (Sweden)

    Mihálik A.


    Full Text Available Nowadays digital cameras with both high resolution and the high dynamic range (HDR can be considered as parallel multiple sensors producing multiple measurements at once. In this paper we describe a technique for processing the captured HDR data and than fit them to theoretical surface reflection models in the form of bidirectional reflectance distribution function (BRDF. Finally, the tabular BRDF can be used to calculate the gloss reflection of the surface. We compare the captured glossiness by digital camera with gloss measured with the industry device and conclude that the results fit well in our experiments.

  7. Advanced Measurement Devices for the Microgravity Electromagnetic Levitation Facility EML (United States)

    Brillo, Jurgen; Fritze, Holger; Lohofer, Georg; Schulz, Michal; Stenzel, Christian


    This paper reports on two advanced measurement devices for the microgravity electromagnetic levitation facility (EML), which is currently under construction for the use onboard the "International Space Station (ISS)": the "Sample Coupling Electronics (SCE)" and the "Oxygen Sensing and Control Unit (OSC)". The SCE measures by a contactless, inductive method the electrical resistivity and the diameter of a spherical levitated metallic droplet by evaluating the voltage and electrical current applied to the levitation coil. The necessity of the OSC comes from the insight that properties like surface tension or, eventually, viscosity cannot seriously be determined by the oscillating drop method in the EML facility without knowing the conditions of the surrounding atmosphere. In the following both measurement devices are explained and laboratory test results are presented.

  8. 46 CFR 154.1340 - Temperature measuring devices. (United States)


    ... 46 Shipping 5 2010-10-01 2010-10-01 false Temperature measuring devices. 154.1340 Section 154.1340... Instrumentation § 154.1340 Temperature measuring devices. (a) Each cargo tank must have devices that measure the... level allowed under § 154.1844. (b) Each device required by paragraph (a) must have a readout at...

  9. Current adaptation measures and policies (United States)

    Geoff Roberts; John A. Parrotta; Anita. Wreford


    As stated in earlier chapters, the possible impacts of climate change on forests and the forest sector are considerable, and many impacts have already been observed. As forest conditions change, there is an inherent need to change management and policy measures to minimise negative impacts and to exploit the benefits derived from climate change. This chapter highlights...

  10. Mass measurements based on nanomechanical devices: differential measurements

    Energy Technology Data Exchange (ETDEWEB)

    Arcamone, J; Rius, G; Llobet, J; Borrise, X; Perez-Murano, F [CNM-IMB (CSIC). Campus UAB. E-08193 Bellaterra (Barcelona) (Spain)], E-mail:, E-mail:


    In the last few years, there has been a strong interest in implementing nano-mechanical devices as mass sensors. Regarding this application, an important question to address is to know to what extent the observed frequency shift is exclusively due to the targeted mass loading. For this purpose, we present a device, a polysilicon double cantilever, with an innovative design that allows the direct determination of the measurement uncertainty. Two almost identical nanomechanical resonators are simultaneously operated: one serves as sensor and the other as reference. In this way, rapid and reliable measurements in air are made possible. In first experimental measurements, some masses in the order of 300 fg, locally deposited by focused ion beam, have been measured with an uncertainty of 30 fg. These results are corroborated by the determination of the deposits size based on SEM images.

  11. A Semiconductor Device Noise Model: A Deterministic Approach to Semiconductor Device Current Noise for Semiclassical Transport (United States)

    Noaman, B. A.; Korman, C. E.


    In this paper, we present a deterministic approach to calculate terminal current noise characteristics in semiconductor devices in the framework of semiclassical transport based on the spherical harmonics of the Boltzmann Transport Equation. The model relies on the solution of the Boltzmann equation in the frequency domain with special initial and boundary conditions. The terminal current fluctuation is directly related to scattering without the additional Langevin noise term added to the calculation. Simulation results are presented for the terminal current spectral density for a 1-D n+nn+ structure due to elastic-acoustic and intervally scattering.

  12. Polymeric salt bridges for conducting electric current in microfluidic devices (United States)

    Shepodd, Timothy J.; Tichenor, Mark S.; Artau, Alexander


    A "cast-in-place" monolithic microporous polymer salt bridge for conducting electrical current in microfluidic devices, and methods for manufacture thereof is disclosed. Polymeric salt bridges are formed in place in capillaries or microchannels. Formulations are prepared with monomer, suitable cross-linkers, solvent, and a thermal or radiation responsive initiator. The formulation is placed in a desired location and then suitable radiation such as UV light is used to polymerize the salt bridge within a desired structural location. Embodiments are provided wherein the polymeric salt bridges have sufficient porosity to allow ionic migration without bulk flow of solvents therethrough. The salt bridges form barriers that seal against fluid pressures in excess of 5000 pounds per square inch. The salt bridges can be formulated for carriage of suitable amperage at a desired voltage, and thus microfluidic devices using such salt bridges can be specifically constructed to meet selected analytical requirements.

  13. Current-Voltage Characteristics of Molecular Devices at Low Bias

    Institute of Scientific and Technical Information of China (English)

    LIAO Yun-Xing; CHEN Hao; R.Note; H.Mizuseki; Y.Kawazoe


    We use density functional theory and the Green function formalism with charge energy effect included in the self-consistent calculation of the Ⅰ- Ⅴ characteristics of a single benzene ring with an appendage of cf3, and identify some interesting properties of the Ⅰ-Ⅴ characteristics at low bias. The molecule picks up a fractional charge at zero bias, then the additional fractional charge produces a barrier on the junction of the molecule and contacts to perturb current flow on the molecule. This phenomenon may be useful for the design of future molecular devices.

  14. Characterization of current transport in ferroelectric polymer devices

    KAUST Repository

    Hanna, Amir


    We report the charge injection characteristics in poly(vinylidene fluoride-trifluoroethylene), P(VDF-TrFE), as a function of electrode material in metal/ferroelectric/metal device structures. Symmetric and asymmetric devices with Al, Ag, Au and Pt electrodes were fabricated to determine the dominant carrier type, injection current density, and to propose transport mechanisms in the ferroelectric polymer. Higher work function metals such as Pt are found to inject less charges compared to lower work function metals, implying n-type conduction behavior for P(VDF-TrFE) with electrons as the dominant injected carrier. Two distinct charge transport regimes were identified in the P(VDF-TrFE) devices; a Schottky-limited conduction regime for low to intermediate fields (E < 20 MV/m), and a space-charge limited conduction (SCLC) regime for high fields (20 < E < 120 MV/m). Implication of these results for degradation in P(VDF-TrFE) memory performance are discussed. © 2013 Elsevier B.V. All rights reserved.

  15. Current Trends in Implantable Left Ventricular Assist Devices

    Directory of Open Access Journals (Sweden)

    Jens Garbade


    Full Text Available The shortage of appropriate donor organs and the expanding pool of patients waiting for heart transplantation have led to growing interest in alternative strategies, particularly in mechanical circulatory support. Improved results and the increased applicability and durability with left ventricular assist devices (LVADs have enhanced this treatment option available for end-stage heart failure patients. Moreover, outcome with newer pumps have evolved to destination therapy for such patients. Currently, results using nonpulsatile continuous flow pumps document the evolution in outcomes following destination therapy achieved subsequent to the landmark Randomized Evaluation of Mechanical Assistance for the Treatment of Congestive Heart Failure Trial (REMATCH, as well as the outcome of pulsatile designed second-generation LVADs. This review describes the currently available types of LVADs, their clinical use and outcomes, and focuses on the patient selection process.

  16. Current and Perspective Applications of Dense Plasma Focus Devices (United States)

    Gribkov, V. A.


    Dense Plasma Focus (DPF) devices' applications, which are intended to support the main-stream large-scale nuclear fusion programs (NFP) from one side (both in fundamental problems of Dense Magnetized Plasma physics and in its engineering issues) as well as elaborated for an immediate use in a number of fields from the other one, are described. In the first direction such problems as self-generated magnetic fields, implosion stability of plasma shells having a high aspect ratio, etc. are important for the Inertial Confinement Fusion (ICF) programs (e.g. as NIF), whereas different problems of current disruption phenomenon, plasma turbulence, mechanisms of generation of fast particles and neutrons in magnetized plasmas are of great interest for the large devices of the Magnetic Plasma Confinement—MPC (e.g. as ITER). In a sphere of the engineering problems of NFP it is shown that in particular the radiation material sciences have DPF as a very efficient tool for radiation tests of prospect materials and for improvement of their characteristics. In the field of broad-band current applications some results obtained in the fields of radiation material sciences, radiobiology, nuclear medicine, express Neutron Activation Analysis (including a single-shot interrogation of hidden illegal objects), dynamic non-destructive quality control, X-Ray microlithography and micromachining, and micro-radiography are presented. As the examples of the potential future applications it is proposed to use DPF as a powerful high-flux neutron source to generate very powerful pulses of neutrons in the nanosecond (ns) range of its duration for innovative experiments in nuclear physics, for the goals of radiation treatment of malignant tumors, for neutron tests of materials of the first wall, blankets and NFP device's constructions (with fluences up to 1 dpa per a year term), and ns pulses of fast electrons, neutrons and hard X-Rays for brachytherapy.

  17. Device for measuring mechanical drilling velocity

    Energy Technology Data Exchange (ETDEWEB)

    Turchaninov, Y.N.; Ippolitova, L.G.; Khizgilov, A.I.; Rolik, V.A.


    A device is proposed for measuring the mechanical drilling velocity which includes a primary drilling tool supply transformer, control block, trigger, range switch; control block, block for determining motion direction, time counter and measurement instrument. In order to guarantee continuous measurement of the mechanical velocity and to improve the accuracy of measuring the average mechanical velocity during drilling at sea, it is equipped with a block for multiplying the number of pulses, four I circuits, supply counter, supply recorder, primary neutral transformer, two controllable frequency dividers, first frequency divider, generator of prime pulses consisting of a generatror of reference frequencies and second frequency divider, time recorder, counter and velocity recorder, time recorder and digital-analog transformer. In this case the outlet of the primary transformer for drilling tool supply is connected through a in-series connected block for determining the movement direction, block for multiplying the number of pulses, first circuit I and supply counter to one of the inlets of the supply counter. Its second inlet is connected through a block of control to the primary neutral transformer and one of the inlets of the time recorder. Its second inlet is connected through a in-series connected time counter, fourth I circuit, second frequency divider, generator of reference frequency, first frequency divider, third circuit I, second controllable frequency divider, counter and velocity recorder and digital-analog transformer of the measurement instrument. The outlet of the supply recorder is connected to one of the inlets of the first controllable divider. Its second inlet is connected to the second I circuit to the outlet of the first frequency divider, and the outlet is connected to one of the trigger inlets.

  18. Enhanced current noise correlations in a Coulomb-Majorana device (United States)

    Lü, Hai-Feng; Lu, Hai-Zhou; Shen, Shun-Qing


    Majorana bound states (MBSs) nested in a topological nanowire are predicted to manifest nonlocal correlations in the presence of a finite energy splitting between the MBSs. However, the signal of the nonlocal correlations has not yet been detected in experiments. A possible reason is that the energy splitting is too weak and seriously affected by many system parameters. Here we investigate the charging energy induced nonlocal correlations in a hybrid device of MBSs and quantum dots. The nanowire that hosts the MBSs is assumed in proximity to a mesoscopic superconducting island with a finite charging energy. Each end of the nanowire is coupled to one lead via a quantum dot with resonant levels. With a floating superconducting island, the devices show a negative differential conductance and giant super-Poissonian shot noise, due to the interplay between the nonlocality of the MBSs and dynamical Coulomb blockade effect. When the island is strongly coupled to a bulk superconductor, the current cross correlations at small lead chemical potentials are negative by tuning the dot energy levels. In contrast, the cross correlation is always positive in a non-Majorana setup. This difference may provide a signature for the existence of the MBSs.

  19. Electrical measuring device, method and computer program product

    NARCIS (Netherlands)

    Meijer G.C.M.; Hilhorst, M.A.


    The invention relates to an electrical measuring device for performing an electrical -impedance measurement in a contactless manner. The measuring device comprises a measuring unit which is provided with the impedance (7,8) to be measured and a passive resonance circuit (4) connected thereto for

  20. LEDA beam diagnostics instrumentation: Beam current measurement (United States)

    Barr, D.; Day, L.; Gilpatrick, J. D.; Kasemir, K.-U.; Martinez, D.; Power, J. F.; Shurter, R.; Stettler, M.


    The Low Energy Demonstration Accelerator (LEDA) facility located at Los Alamos National Laboratory (LANL) accelerates protons to an energy of 6.7 MeV and current of 100 mA operating in either a pulsed or cw mode. Two types of current measurements are used. The first is an AC or pulsed-current measurement which uses three LANL built toroids. They are placed in the beamline in such a way as to measure important transmission parameters and act as a differential current-loss machine protection system. The second system is a DC current measurement used to measure cw beam characteristics and uses toroids from Bergoz Inc. There are two of these systems, so they can also be used for transmission measurements. The AC system uses custom processing electronics whereas the DC system uses a modified Bergoz® electronics system. Both systems feature data acquisition via a series of custom TMS320C40 Digital Signal Processing (DSP) boards. Of special interest to this paper is the operation of these systems, the calibration technique, the differential current loss measurements and fast-protection processing, current droop characteristics for the AC system, and existing system noise levels. This paper will also cover the DSP system operations and their interaction with the main accelerator control system.

  1. The AC (Alternating Current) Electrical Behavior of Multi-layered Thermoelectric Devices (United States)

    Alim, Mohammad A.; Budak, Satilmis; Bhattacharjee, Sudip


    In this study the ac (alternating current) small-signal electrical data in the frequency range 5 Hz ≤ f ≤ 13 MHz are obtained for the multi-layered thermoelectric (TE) devices to extract underlying operative mechanisms via an equivalent circuit model. This model is developed from the complex plane plots in conjunction with the Bode plot. It is observed that the inductive behavior is prevalent for both unbombarded and bombarded TE devices regardless of the doses as both types are observed as somewhat weak in thermoelectric properties. The bombarded multi-layered devices followed a systematic pattern in ac behavior via semicircular relaxation both in the impedance and admittance planes for the same measured data. This pattern is attributed to the transition from one lumped behavior to two distinct mechanisms. It is observed that the conductive nature of the equivalent circuit model via non-blocking (non-capacitive) elements, attributed to the underlying operative electrical paths between the two opposite electrodes across the multi-layered device exists, satisfying direct current conditions of the equivalent circuit model. The inductive behavior at high frequencies originates from the conductive aspect of the lumped response of the device in addition to the contribution of the electrode leads. Thus, the proposed equivalent circuit model contains external inductance that verifies a meaningful representation of the multi-layered TE device, though weak in thermoelectric properties.

  2. An Algorithm to Estimate Time Offset between Measurement Devices

    Institute of Scientific and Technical Information of China (English)

    HUANG Zhou-song; LEI Zhen-ming


    This paper analyzes the necessity of the measurement of one-way delay, and it also points out the errors caused by the time offset between measurement devices. Then we propose an algorithm to estimate time offset between measurement devices in network. With the estimated time offset, we can correct our measuring results. Simulation shows the effectiveness of our algorithm.


    Directory of Open Access Journals (Sweden)

    A. Annunziato


    Full Text Available A new mareograph device has been designed at the Joint Research Centre (JRC of the European Commission (EC in order improve the sea level network in use for the Tsunami Hazard monitoring in the Mediterranean Sea and in the North Atlantic area (NEAMTWS area of UNESCO. The instrument has the characteristic to be cheap and very effective but its reliability, duration and quality need to be determined and qualified. For this reason a number of experimental campaigns are being conducted, whose first results are presented here. In collaboration with the UNESCO/IOC (Intergovernmental Oceanographic Commission, responsible of the definition of the Tsunami Warning System of this geographical area, a set of 20 devices has been offered by JRC for a period of 1 year of testing of the devices; the surveys for the installation of the devices is under way and the installation should be completed by the end of 2015.

  4. Measurement of Device Parameters Using Image Recovery Techniques in Large-Scale IC Devices (United States)

    Scheick, Leif; Edmonds, Larry


    Devices that respond to radiation on a cell level will produce histograms showing the relative frequency of cell damage as a function of damage. The measured distribution is the convolution of distributions from radiation responses, measurement noise, and manufacturing parameters. A method of extracting device characteristics and parameters from measured distributions via mathematical and image subtraction techniques is described.

  5. Leakage current measurement in transformerless PV inverters

    DEFF Research Database (Denmark)

    Kerekes, Tamas; Sera, Dezso; Mathe, Laszlo


    to be used in commercial PV inverters for the measurement of leakage and fault ground currents. The German VDE0126–1–1 standard gives the limit for fault and leakage ground currents and all grid connected PV inverters have to comply with these limits and disconnect from the grid in case of a fault.......Photovoltaic (PV) installations have seen a huge increase during the last couple of years. Transformerless PV inverters are gaining more share of the total inverter market, due to their high conversion efficiency, small weight and size. Nevertheless safety should have an important role in case...... of these tranformerless systems, due to the missing galvanic isolation. Leakage and fault current measurement is a key issue for these inverter topologies to be able to comply with the required safety standards. This article presents the test results of two different current measurement sensors that were suggested...

  6. Noncontact Measurement Of Critical Current In Superconductor (United States)

    Israelsson, Ulf E.; Strayer, Donald M.


    Critical current measured indirectly via flux-compression technique. Magnetic flux compressed into gap between superconductive hollow cylinder and superconductive rod when rod inserted in hole in cylinder. Hall-effect probe measures flux density before and after compression. Method does not involve any electrical contact with superconductor. Therefore, does not cause resistive heating and consequent premature loss of superconductivity.

  7. In-vitro diagnostic devices introduction to current point-of-care diagnostic devices

    CERN Document Server

    Cheng, Chao-Min; Chen, Chien-Fu


    Addressing the origin, current status, and future development of point-of-care diagnostics, and serving to integrate knowledge and tools from Analytical Chemistry, Bioengineering, Biomaterials, and Nanotechnology, this book focusses on addressing the collective and combined needs of industry and academia (including medical schools) to effectively conduct interdisciplinary research. In addition to summarizing and detailing developed diagnostic devices, this book will attempt to point out the possible future trends of development for point-of-care diagnostics using both scientifically based research and practical engineering needs with the aim to help novices comprehensively understand the development of point-of-care diagnostics. This includes demonstrating several common but critical principles and mechanisms used in point-of-care diagnostics that address practical needs (e.g., disease or healthcare monitoring) using two well-developed examples so far: 1) blood glucose meters (via electrochemistry); and, 2) p...

  8. Electrical measuring device, method and computer program product


    Meijer G.C.M.; Hilhorst, M.A.


    The invention relates to an electrical measuring device for performing an electrical -impedance measurement in a contactless manner. The measuring device comprises a measuring unit which is provided with the impedance (7,8) to be measured and a passive resonance circuit (4) connected thereto for generating a measuring signal to be wirelessly received by a separate active transmitting and receiving unit for determination of the electrical impedance, upon wireless reception of an interrogation ...

  9. Current perspectives in percutaneous atrial septal defect closure devices

    Directory of Open Access Journals (Sweden)

    Bissessor N


    Full Text Available N Bissessor1–4 1Department of Cardiology, The Epworth Hospital, Melbourne, VIC, Australia; 2Division of Interventional Cardiology, The Alfred Hospital, Melbourne, VIC, Australia; 3Department of Clinical Science, Charles Sturt University Albury Campus, NSW, Australia; 4Heart Foundation, Griffith University, QLD, Australia Abstract: In the last decade, percutaneous atrial septal defect (ASD closure has become the treatment of choice in most clinical presentations of ASD. Percutaneous ASD closure has established procedural safety through operator experience and improved device structure and deliverability. There have also been advances in diagnostic capabilities. Devices have evolved from large bulky meshes to repositionable, minimal residual mesh content that easily endothelializes and conforms well to surrounding structures. Biodegradable technology has been introduced and will be closely watched as a future option. The evolution of ASD closure device usage in the last four decades incorporates development that minimizes a wide range of serious side effects that have been reported over the years. Complications reported in the literature include thrombus formation, air embolization, device embolization, erosions, residual shunts, and nickel hypersensitivity. Modern devices have intermediate to long term data with outcomes that have been favorable. Devices are available in multiple sizes with improved delivery mechanisms to recapture, reposition, and safely close simple and complex ASDs amenable to percutaneous closure. In this review, commonly used devices and deployment procedures are discussed together with a look at devices that show promise for the future. Keywords: ASD, congenital, Amplatzer, Gore Helex, Biostar, Figulla

  10. Variable-Temperature Critical-Current Measurements

    Energy Technology Data Exchange (ETDEWEB)

    L. F. Goodrich; T. C. Stauffer


    This is the final report of a three year contract that covered 09/19/2005 to 07/14/2008. We requested and received a no cost time extension for the third year, 07/15/2007 to 07/14/2008, to allow DoE to send us funds if they became available during that year. It turned out that we did not receive any funding for the third year. The following paper covers our variable-temperature critical-current measurements. We made transport critical-current (Ic) measurements on commercial multifilamentary Nb3Sn strands at temperatures (T) from 4 to 17 K and magnetic fields (H) from 0 to 14 T. One of the unique features of our measurements is that we can cover a wide range of critical currents from less than 0.1 A to over 700 A.

  11. Current american practice in color measurement. (United States)

    Billmeyer, F W


    Current Aimerienn practice in color measurement is reviewed from the standpoint of instrumentation practice, measurement concepts, and computational methods. Instrumentation practice is described for spectrophotometers, abridged spectrophotometers, and tristimulus colorimeters. Measurement variables discussed include photometric and wavelength scales, standards and standardization, illuminating and viewing geometry, and instrument sources simulating standard illuminants. Computation-methods practiced for obtaining color coordinates and color differences are discussed. Topics indirectly related to the measurement step, such as the basis of colorimetry, color mixing laws, and computer color matching, are specifically excluded from this paper.

  12. Development of a wireless blood pressure measuring device with smart mobile device. (United States)

    İlhan, İlhan; Yıldız, İbrahim; Kayrak, Mehmet


    Today, smart mobile devices (telephones and tablets) are very commonly used due to their powerful hardware and useful features. According to an eMarketer report, in 2014 there were 1.76 billion smartphone users (excluding users of tablets) in the world; it is predicted that this number will rise by 15.9% to 2.04 billion in 2015. It is thought that these devices can be used successfully in biomedical applications. A wireless blood pressure measuring device used together with a smart mobile device was developed in this study. By means of an interface developed for smart mobile devices with Android and iOS operating systems, a smart mobile device was used both as an indicator and as a control device. The cuff communicating with this device through Bluetooth was designed to measure blood pressure via the arm. A digital filter was used on the cuff instead of the traditional analog signal processing and filtering circuit. The newly developed blood pressure measuring device was tested on 18 patients and 20 healthy individuals of different ages under a physician's supervision. When the test results were compared with the measurements made using a sphygmomanometer, it was shown that an average 93.52% accuracy in sick individuals and 94.53% accuracy in healthy individuals could be achieved with the new device. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  13. Automatic system for ionization chamber current measurements. (United States)

    Brancaccio, Franco; Dias, Mauro S; Koskinas, Marina F


    The present work describes an automatic system developed for current integration measurements at the Laboratório de Metrologia Nuclear of Instituto de Pesquisas Energéticas e Nucleares. This system includes software (graphic user interface and control) and a module connected to a microcomputer, by means of a commercial data acquisition card. Measurements were performed in order to check the performance and for validating the proposed design.

  14. Device to measure elastic modulus of superconducting windings

    CERN Multimedia

    CERN PhotoLab


    This device was made to measure elastic modulus of the Po dipole superconducting coils. More elaborated devices, but based on the same concept, were later used to measure the apparent elastic moduli of the LHC superconducting magnet coils. See also 7903547X, 7901386.

  15. Personal view: current role of artificial liver support devices. (United States)

    O'Grady, J


    Enthusiasm for liver support devices, particularly cell-based biological systems and albumin dialysis, increased over the last decade and there has been considerable clinical activity both within and without the construct of clinical trials. Most data have been generated on patients with acute liver failure or in patients with decompensation of chronic liver disease, often referred to as acute-on-chronic liver failure. In acute liver failure liver, liver support devices are more realistically being used as a 'bridge' to liver transplantation rather than to transplant-free survival. In acute-on-chronic liver failure the clinical objective of attaining clinical stability with treatment appears more achievable. The so-called bioartificial liver device, based on porcine hepatocytes, is the most extensively evaluated biological device. A sizeable clinical trial failed to demonstrate efficacy, but secondary analyses suggest it would be unwise to assume futility had been established with this device. Molecular adsorbent recirculating system leads the way in the non-biological category in terms of the number of patients treated, but data from large clinical trials are not yet available. One of the strongest conclusions of this review is that the amount of high-quality data available on liver support devices dramatically understates the effort and money that have been expended in their assessment. It is very clear that randomized controlled trials are mandatory to establish clinical efficacy, but it is less clear how the ideal trial should be constructed.

  16. Ionic current devices-Recent progress in the merging of electronic, microfluidic, and biomimetic structures. (United States)

    Koo, Hyung-Jun; Velev, Orlin D


    We review the recent progress in the emerging area of devices and circuits operating on the basis of ionic currents. These devices operate at the intersection of electrochemistry, electronics, and microfluidics, and their potential applications are inspired by essential biological processes such as neural transmission. Ionic current rectification has been demonstrated in diode-like devices containing electrolyte solutions, hydrogel, or hydrated nanofilms. More complex functions have been realized in ionic current based transistors, solar cells, and switching memory devices. Microfluidic channels and networks-an intrinsic component of the ionic devices-could play the role of wires and circuits in conventional electronics.

  17. Measuring directional characteristics of in-ear recording devices

    DEFF Research Database (Denmark)

    Christensen, Flemming; Hoffmann, Pablo F.; Hammershøi, Dorte


    With the availability of small in-ear headphones and miniature microphones it is possible to construct combined in-ear devices for binaural recording and playback. When mounting a microphone on the outside of an insert earphone the microphone position deviates from ideal positions in the ear canal....... The pinna and thereby also the natural sound transmission are altered by the inserted device. This paper presents a methodology for accurately measuring the directional dependent transfer functions of such in-ear devices. Pilot measurements on a commercial available device are presented and possibilities...

  18. Correlation Measurements on Small Mobile Devices

    DEFF Research Database (Denmark)

    Yanakiev, Boyan Radkov; Nielsen, Jesper Ødum; Christensen, Morten


    Here, analysis of the antenna correlation at the design stage is done, with focus on measurement techniques. Various theoretical definitions of correlations are used with the corresponding measured data required. The problems related to the coaxial measurement cables, when calculating correlation...

  19. Current Reversal and Negative Conductance for a Super-Conducting Junctions Device

    Institute of Scientific and Technical Information of China (English)

    LI Jing-Hui


    In the paper, we study a super-conducting junctions device subject to an input periodic signal and a constant force. It is shown that, for this device, we can get current reversals for the current of the electron pairs versus the frequency of the periodic signal and negative conductance for the current of the electron pairs as a function of the constant force.

  20. Optical vibration measurement of mechatronics devices (United States)

    Yanabe, Shigeo


    An optical vibration measuring system which enables to detect both linear and angular displacement of 25 nm and 5 prad was developed. The system is mainly composed of a He-Ne laser, a displacement detecting photo-diode and lenses, and has linear and angular displacement magnification mechanism using two different principles of optical lever. The system was applied to measure vibrational characteristics of magnetic head slider of hard disk drives and to measure stator teeth driving velocities of ultrasonic motor.

  1. Test device for measuring permeability of a barrier material (United States)

    Reese, Matthew; Dameron, Arrelaine; Kempe, Michael


    A test device for measuring permeability of a barrier material. An exemplary device comprises a test card having a thin-film conductor-pattern formed thereon and an edge seal which seals the test card to the barrier material. Another exemplary embodiment is an electrical calcium test device comprising: a test card an impermeable spacer, an edge seal which seals the test card to the spacer and an edge seal which seals the spacer to the barrier material.

  2. Educational Behavior Apps and Wearable Devices: Current Research and Prospects (United States)

    Lowe, Heather


    Dartmouth and MIT have developed educational behavior apps and wearable devices that collect contiguous streams of data from student users. Given the consent of the user, the app collects information about a student's physical activity, sleep patterns, and location to form conjectures about social and academic behavior. These apps have the…

  3. First principle leakage current reduction technique for CMOS devices

    CSIR Research Space (South Africa)

    Tsague, HD


    Full Text Available that the device is suitable for low power applications. Physical models used for simulation included SI(sub3)N(sub4) and HfO(sub2) as gate dielectric with TiSix as metal gate. From the simulation result, it was shown that HfO2 was the best dielectric material when...

  4. Logarithmic current-measuring transistor circuits

    DEFF Research Database (Denmark)

    Højberg, Kristian Søe


    Describes two transistorized circuits for the logarithmic measurement of small currents suitable for nuclear reactor instrumentation. The logarithmic element is applied in the feedback path of an amplifier, and only one dual transistor is used as logarithmic diode and temperature compensating...... transistor. A simple one-amplifier circuit is compared with a two-amplifier system. The circuits presented have been developed in connexion with an amplifier using a dual m.o.s. transistor input stage with diode-protected gates....

  5. Memory-assisted measurement-device-independent quantum key distribution (United States)

    Panayi, Christiana; Razavi, Mohsen; Ma, Xiongfeng; Lütkenhaus, Norbert


    A protocol with the potential of beating the existing distance records for conventional quantum key distribution (QKD) systems is proposed. It borrows ideas from quantum repeaters by using memories in the middle of the link, and that of measurement-device-independent QKD, which only requires optical source equipment at the user's end. For certain memories with short access times, our scheme allows a higher repetition rate than that of quantum repeaters with single-mode memories, thereby requiring lower coherence times. By accounting for various sources of nonideality, such as memory decoherence, dark counts, misalignment errors, and background noise, as well as timing issues with memories, we develop a mathematical framework within which we can compare QKD systems with and without memories. In particular, we show that with the state-of-the-art technology for quantum memories, it is potentially possible to devise memory-assisted QKD systems that, at certain distances of practical interest, outperform current QKD implementations.

  6. Effects of rf current on critical field for magnetization reversal in spin torque devices (United States)

    Chen, Wenyu; Florez, Sylvia; Katine, Jordan; Carey, Matthew; Folks, Liesl; Terris, Bruce


    Current induced switching assisted by rf current has recently been observed in spin torque devices at low temperature [1, 2]. This effect allows control of spin transfer induced magnetization reversal through the frequency of an injected rf current. In this study, the effects of the rf current injection on critical field for magnetization reversal in spin valve junctions have been investigated. Measurements were conducted at room temperature, and the magnetic field was applied along the easy axis of the junction. An rf current was injected into the nanojunction at various frequencies ranging between 1 and 20 GHz. The dynamic resistance, dV/dI, was measured as a function of the rf frequency, power and the dc bias current while ramping the magnetic field. The rf current injection was observed to change the critical field for free layer magnetization reversal when the intrinsic spin-transfer-induced dynamics is frequency-locked with the injected rf. The results will be discussed in the context of macrospin models of spin transfer in metallic spin valve structures. [1] S. H. Florez et al. Phys. Rev. B 78, 184403 (2008) [2] Y.-T. Cui et al. Phys. Rev. B 77, 214440 (2008)

  7. Device for Measuring Landslide Critical Angle

    Institute of Scientific and Technical Information of China (English)

    Li Xueling; Xia Weisheng; Huang Daoyou; Yu Yun


    The mountain landslide has high destructive effects, discussion of its landslide critical angle has always been one of the major concerns, and we designed a system that can automatically measure the landslide critical angle. This equipment consists of the

  8. Device and method for measuring the dynamic interaction between bodies

    NARCIS (Netherlands)

    Veltink, Petrus H.


    The invention relates to a device for measuring the dynamic interaction, in particular power transfer and work performed, between a first and a second body, in particular during relatively random movements. The device comprises a housing in which at least one kinematic sensor and at least one

  9. Small Device For Short-Range Antenna Measurements Using Optics

    DEFF Research Database (Denmark)

    Yanakiev, Boyan Radkov; Nielsen, Jesper Ødum; Christensen, Morten


    This paper gives a practical solution for implementing an antenna radiation pattern measurement device using optical fibers. It is suitable for anechoic chambers as well as short range channel sounding. The device is optimized for small size and provides a cheap and easy way to make optical antenna...

  10. Critical current density: Measurements vs. reality (United States)

    Pan, A. V.; Golovchanskiy, I. A.; Fedoseev, S. A.


    Different experimental techniques are employed to evaluate the critical current density (Jc), namely transport current measurements and two different magnetisation measurements forming quasi-equilibrium and dynamic critical states. Our technique-dependent results for superconducting YBa2Cu3O7 (YBCO) film and MgB2 bulk samples show an extremely high sensitivity of Jc and associated interpretations, such as irreversibility fields and Kramer plots, which lose meaning without a universal approach. We propose such approach for YBCO films based on their unique pinning features. This approach allows us to accurately recalculate the magnetic-field-dependent Jc obtained by any technique into the Jc behaviour, which would have been measured by any other method without performing the corresponding experiments. We also discovered low-frequency-dependent phenomena, governing flux dynamics, but contradicting the considered ones in the literature. The understanding of these phenomena, relevant to applications with moving superconductors, can clarify their dramatic impact on the electric-field criterion through flux diffusivity and corresponding measurements.



    Girling, A; Lilford, R; Cole, A; Young, T


    OBJECTIVES: The headroom approach to medical device development relies on the estimation of a value-based price ceiling at different stages of the development cycle. Such price-ceilings delineate the commercial opportunities for new products in many healthcare systems. We apply a simple model to obtain critical business information as the product proceeds along a development pathway, and indicate some future directions for the development of the approach. METHODS: Health economic modelling in...

  12. Video integrated measurement system. [Diagnostic display devices

    Energy Technology Data Exchange (ETDEWEB)

    Spector, B.; Eilbert, L.; Finando, S.; Fukuda, F.


    A Video Integrated Measurement (VIM) System is described which incorporates the use of various noninvasive diagnostic procedures (moire contourography, electromyography, posturometry, infrared thermography, etc.), used individually or in combination, for the evaluation of neuromusculoskeletal and other disorders and their management with biofeedback and other therapeutic procedures. The system provides for measuring individual diagnostic and therapeutic modes, or multiple modes by split screen superimposition, of real time (actual) images of the patient and idealized (ideal-normal) models on a video monitor, along with analog and digital data, graphics, color, and other transduced symbolic information. It is concluded that this system provides an innovative and efficient method by which the therapist and patient can interact in biofeedback training/learning processes and holds considerable promise for more effective measurement and treatment of a wide variety of physical and behavioral disorders.

  13. An improved device to measure cottonseed strength (United States)

    During processing, seeds of cotton cultivars with fragile seeds often break and produce seed coat fragments that can cause processing problems at textile mills. A cottonseed shear tester, previously developed to measure cottonseed strength, was modified with enhancements to the drive system to provi...

  14. Eliminating leakage current in voltage-controlled exchange-bias devices (United States)

    Mahmood, Ather; Echtenkamp, Will; Street, Michael; Binek, Christian; Magnetic Heterostructures Team

    Manipulation of magnetism by electric field has drawn much attention due to the technological importance for low-power devices, and for understanding fundamental magnetoelectric phenomena. A manifestation of electrically controlled magnetism is voltage control of exchange bias (EB). Robust isothermal voltage control of EB was demonstrated near room temperature using a heterostructure of Co/Pd thin film and an exchange coupled single crystal of the antiferromagnetic Cr2O3 (Chromia). A major obstacle for EB in lithographically patterned Chromia based thin-film devices is to minimize the leakage currents at high electric fields (>10 kV/mm). By combining electrical measurements on patterned devices and conductive Atomic Force Microscopy of Chromia thin-films, we investigate the defects which form conducting paths impeding the application of sufficient voltage for demonstrating the isothermal EB switching in thin film heterostructures. Technological challenges in the device fabrication will be discussed. This project was supported by SRC through CNFD, an SRC-NRI Center, by C-SPIN, part of STARnet, and by the NSF through MRSEC Abstract DMR-0820521.

  15. Evaluating the Consistency of Current Mainstream Wearable Devices in Health Monitoring: A Comparison Under Free-Living Conditions (United States)

    Wen, Dong; Zhang, Xingting; Liu, Xingyu


    brand, Apple or Samsung (r>.88). Conclusions Although wearable devices are developing rapidly, the current mainstream devices are only reliable in measuring the number of steps and distance, which can be used as health assessment indicators. However, the measurement consistencies of activity duration, EE, sleep quality, and so on, are still inadequate, which require further investigation and improved algorithms. PMID:28270382

  16. Device Architecture and Materials for Organic Light-Emitting Devices Targeting High Current Densities and Control of the Triplet Concentration

    CERN Document Server

    Schols, Sarah


    Device Architecture and Materials for Organic Light-Emitting Devices focuses on the design of new device and material concepts for organic light-emitting devices, thereby targeting high current densities and an improved control of the triplet concentration. A new light-emitting device architecture, the OLED with field-effect electron transport, is demonstrated. This device is a hybrid between a diode and a field-effect transistor. Compared to conventional OLEDs, the metallic cathode is displaced by one to several micrometers from the light-emitting zone, reducing optical absorption losses. The electrons injected by the cathode accumulate at an organic heterojunction and are transported to the light-emission zone by field-effect. High mobilities for charge carriers are achieved in this way, enabling a high current density and a reduced number of charge carriers in the device. Pulsed excitation experiments show that pulses down to 1 µs can be applied to this structure without affecting the light intensity, sug...

  17. Design of Residues Measurement Device of Uranium

    Institute of Scientific and Technical Information of China (English)

    SUI; Hong-zhi; XU; Zheng; LU; Wen-guang; HE; Li-xia; GAN; Lin


    <正>Nuclear materials will be deposited in the pipeline or various process equipment during the operation of nuclear facilities, such as dissolution reactor, because the recovery residue of uranium not dissolved, and a metal tubularis in the dissolution reactor cannot insert to the bottom of the container, so that part of the residual slag and the solution stored in the bottom of the reactor. When the equipment is used for treatment of nuclear material, it is difficult to put out all the nuclear material in the equipment. Therefore, measurement of these residues for nuclear material accountancy, the safe operation of the facilities,

  18. Methods and Devices used to Measure Friction

    DEFF Research Database (Denmark)

    Jeswiet, Jack; Arentoft, Mogens; Henningsen, Poul


    The physical condition at the work-piece/die boundary, in both bulk forming and sheet forming is, arguably, the single most important physical parameter influencing the processing of metals, yet it remains the least understood. Hence the need for basic research into metal-die interface mechanisms....... To gain a good understanding of the mechanisms at the interface and to be able to verify the friction and tribology models that exist, friction sensors are needed. Designing sensors to measure friction-stress in metal working has been pursued by many researchers. This paper surveys methods, which have...

  19. Device-Independent Certification of a Nonprojective Qubit Measurement (United States)

    Gómez, Esteban S.; Gómez, Santiago; González, Pablo; Cañas, Gustavo; Barra, Johanna F.; Delgado, Aldo; Xavier, Guilherme B.; Cabello, Adán; Kleinmann, Matthias; Vértesi, Tamás; Lima, Gustavo


    Quantum measurements on a two-level system can have more than two independent outcomes, and in this case, the measurement cannot be projective. Measurements of this general type are essential to an operational approach to quantum theory, but so far, the nonprojective character of a measurement can only be verified experimentally by already assuming a specific quantum model of parts of the experimental setup. Here, we overcome this restriction by using a device-independent approach. In an experiment on pairs of polarization-entangled photonic qubits we violate by more than 8 standard deviations a Bell-like correlation inequality that is valid for all sets of two-outcome measurements in any dimension. We combine this with a device-independent verification that the system is best described by two qubits, which therefore constitutes the first device-independent certification of a nonprojective quantum measurement.

  20. A Device for Measuring Sonic Velocity and Compressor Mach Number (United States)


    resonator (the only 4 NACA TN No. 1664 accurate measurement required) is measured, as shomn in figure 1, by means of a mercury manometer . The compressor vs not connected to the ccmpressor inlet until after calibration. The pressure in the device was measured by means of the mercury manometer . Fram

  1. Evaluation of Strain Measurement Devices for Inflatable Structures (United States)

    Litteken, Doug


    Inflatable structures provide a significant volume savings for future NASA deep space missions. The complexity of these structures, however, provides difficulty for engineers in designing, analyzing, and testing. Common strain measurement systems for metallic parts cannot be used directly on fabrics. New technologies must be developed and tested to accurately measure the strain of inflatable structures. This paper documents the testing of six candidate strain measurement devices for use on fabrics. The resistance devices tested showed significant hysteresis during creep and cyclic testing. The capacitive device, however, showed excellent results and little-to-no hysteresis. Because of this issue, only two out of the six proposed devices will continue in development. The resulting data and lessons learned from this effort provides direction for continued work to produce a structural health monitoring system for inflatable habitats.

  2. Electronic heat current rectification in hybrid superconducting devices

    Energy Technology Data Exchange (ETDEWEB)

    Fornieri, Antonio, E-mail:; Giazotto, Francesco, E-mail: [NEST, Istituto Nanoscienze-CNR and Scuola Normale Superiore, I-56127 Pisa (Italy); Martínez-Pérez, María José [Physikalisches Institut - Experimentalphysik II Universität Tübingen, D-72076 Tübingen (Germany)


    In this work, we review and expand recent theoretical proposals for the realization of electronic thermal diodes based on tunnel-junctions of normal metal and superconducting thin films. Starting from the basic rectifying properties of a single hybrid tunnel junction, we will show how the rectification efficiency can be largely increased by combining multiple junctions in an asymmetric chain of tunnel-coupled islands. We propose three different designs, analyzing their performance and their potential advantages. Besides being relevant from a fundamental physics point of view, this kind of devices might find important technological application as fundamental building blocks in solid-state thermal nanocircuits and in general-purpose cryogenic electronic applications requiring energy management.

  3. Cryocup - Compact spherical neutron polarimetry device for small angle measurement (United States)

    Wang, Tianhao

    In my thesis I describe my research work of developing a compact device for Spherical Neutron Polarimetry (SNP) measurements at small neutron scattering angles. The thesis first introduced the purpose of this research project, which is developing an easy to use and maintain version of an advanced neutron experiment technique (SNP). After the introduction, the design principle and construction detail of the prototype device is demonstrated. The design principle is based on our finite element simulation of the device's magnetic field profile, and is later verified by the performance test experiment. The prototype device is tested at the SESAME neutron beamline at Indiana University and the HB-2D beamline at Oak Ridge National laboratory. The performance test data are analyzed and proof that the design is successful and the prototype is capable of perform accurate SNP measurement. Based on the test result, the prototype device is utilized to perform SNP measurement on two types of magnetic film sample: Permalloy and Metglas. Combined with other characterization method such as SQUID and MFM, I study the magnetization of these two samples both at zero magnetic field environment and in external field. The SNP data provided by the prototype device is discussed in the thesis and provide detailed information about the magnetization, which is also not accessible through other method. In the end, the possible improvement and the future application of the device is discussed.

  4. Biological effects of an impulse current according to laboratory researches of electroshock devices

    Directory of Open Access Journals (Sweden)

    Grigoryev О.A.


    Full Text Available The federal law "About Weapons" permits the use of electroshock devices if they are safe for people. We developed requirements for the procedure medical-biological testing on the safety of electroshock devices. We did an experimental study assessing medical-biological safety of electroshock devices. The assessment is based on a point system, which use ranges of biological effects. The experiments were performed in rabbits. We used 13 electroshock devices with different characteristics. Electroshock devices were made in Russia. We found that the response of a biological object to inrush current included convulsions, respiratory and cardiac activity. We analyzed the biological effects of pulsed current electroshock device obtained in experimental conditions. It is concluded that the characteristic clinical and physiological response to the action of electric current is pulsepolyparametric and depending on a combination of characteristics and condition of the electric impulse influence object.

  5. Measurement of radial artery spasm using an automatic pullback device. (United States)

    Kiemeneij, F; Vajifdar, B U; Eccleshall, S C; Laarman, G; Slagboom, T; van der Wieken, R


    Current evaluation of radial artery spasm (RAS), a frequent finding during the transradial approach for coronary angiography and angioplasty (TRA), is subjective. A quantitative measure of RAS will help in evaluation and comparison of management strategies. The objectives of the study were to assess the feasibility and safety of using an automatic pullback device (APD) for removal of transradial introducer sheaths and to establish a parameter to quantify RAS. In 50 consecutive transradial procedures, the APD was used to measure the force required for sheath removal. The mean maximal pullback force (MPF) was 0.53 +/- 0.52 kg (range, 0.1-3.0 kg). In 48 (96%) cases, the MPF was reached within the first 5 sec of pullback. All patients with clinical RAS (n = 4) had an MPF greater than 1.0 kg, while the remaining had an MPF less than 1.0 kg. All patients with severe pain during sheath removal (n = 3) had an MPF greater than 1.0 kg, while no patient with an MPF less than 1.0 kg had severe pain. It is feasible and safe to remove transradial introducer sheaths using the APD. The MPF is achieved within the first 5 sec of pullback and is a reliable parameter to quantify RAS. An MPF more than 1.0 kg correlates with clinical RAS and is associated with severe pain during sheath removal.

  6. Research on Precision Assembly Robot's Joint Torque Control Based on Current Measurement

    Institute of Scientific and Technical Information of China (English)

    董高云; 许春山; 费燕琼; 赵锡芳


    A set of new current sensing device is used to realize joint torque control based on current measurement in a precision assembly robot's third joint. The output torque's model of the joint's brnshless DC motor is founded. Disturbance factors and the compensated effect of the torque's closed loop based on current measurement are analyzed. Related simulations and experiments show that the system has good current tracking and anti-disturbances performance, which improve the force control performance of the robot in assembly.

  7. Translation of device performance measurements to reference conditions

    Energy Technology Data Exchange (ETDEWEB)

    Osterwald, C.R.


    Translation of photovoltaic performance measurements is required when a measurement is made under conditions different from those specified in standard measurement procedures. These specifications can be categorized into three areas: the device temperature at the time of measurement; the total incident irradiance level; and the spectral distribution of the incident irradiance. If these three conditions are identical to those specified in the standard measurement procedures, then no translation is required. However, because in practice the standard measurement conditions can be very difficult (and expensive) to achieve, one or more of these three conditions will generally be different and translation is then necessary. In general, the method used for translation is to know how a device responds to different conditions, measure the difference at the time the performance is determined, and correct the performance measurement to the standard conditions.

  8. Device and method for measuring the dynamic interaction between bodies


    Veltink, Petrus H.


    The invention relates to a device for measuring the dynamic interaction, in particular power transfer and work performed, between a first and a second body, in particular during relatively random movements. The device comprises a housing in which at least one kinematic sensor and at least one kinetic sensor is arranged, in addition to processing means for processing the signals from the sensors, and communication means for data exchange with the outside world. The invention also relates to a ...

  9. Urbmobi. A mobile measurement device for urban environmental monitoring

    NARCIS (Netherlands)

    Klok, E.J.; Mark, P.J. van der; Nieuwkoop, E.


    Within the Urbmobi research project, a novel mobile measurement device is developed for urban areas. It provides temporally and spatially distributed environmental data and fulfills the need for monitoring at various places without the costs for a large number of fixed measurement stations. Urbmobi

  10. Measurement of Electromagnetic Fields Emitted from Some Medical Devices

    Directory of Open Access Journals (Sweden)

    Shaker Faisel


    Full Text Available     New medical devices such as surgery devices, physiotherapy devices, cosmetological devices and Magnetic Resonance Imaging (MRI systems generate a complex electromagnetic fields, so they consider as a potential   hazard for medical personnel during surgical procedures. The aim of this research is to detect the EMFs emitted from medical devices and determine the safety ranges from these devices which emit EMF radiations in order to protect Medical staff from its risks. The research has been performed in two parts, numerical calculation and practical measurement. Practical measurements are done in Dijlah hospital at Tikrit city. Obtaining results shows that the practical measurements are consistent with the mathematical calculation results. Comparison of these results with the safety standard guideline limits shows that they   are within the acceptable exposure limits recommended by the International Commission on Non-Ionizing Radiation Protection (ICNIRP and that means there is no health risk from exposure to these fields if the exposure is for a short and not continued periods and lay within the acceptable limits.    

  11. Mathematical Modeling of Eddy-Current Loss for a New Induction Heating Device

    Directory of Open Access Journals (Sweden)

    Hai Du


    Full Text Available A new induction heating device is presented in this paper. This device can convert mechanical energy into heat energy by utilizing eddy currents, which are induced by rotating permanent magnets. A mathematical model is established for estimating eddy-current loss of the device. The distribution of induced currents and the resultant magnetic field intensity are considered in the process of modeling the eddy-current loss and so is the mutual influence of the electric field between neighborhood pole projection areas. Particularly, the skin effect is considered by correcting the numerical integral domain of eddy current density, which has great effect on the calculating results. Based on specific examples, the effectiveness and correctness of proposed model are proved by finite element analysis. The results show that the mathematical model can provide important reference for design and structure optimization of the device.

  12. A High Voltage High Frequency Resonant Inverter for Supplying DBD Devices with Short Discharge Current Pulses


    Bonnin, Xavier; Brandelero, Julio; Videau, Nicolas; Piquet, Hubert; Meynard, Thierry


    International audience; In this paper, the merits of a high-frequency resonant converter for supplying dielectric barrier discharges (DBD) devices are established. It is shown that, thanks to its high-frequency operating condition, such a converter allows to supply DBD devices with short discharge current pulses, a high repetition rate, and to control the injected power. In addition, such a topology eliminates the matter of connecting a high-voltage transformer directly across the DBD device ...

  13. Measurement Devices and the Psychophysiology of Consumer Behaviour

    DEFF Research Database (Denmark)

    Schwarzkopf, Stefan


    of the type of subjectivity that underlies consumer behaviour. I argue instead that a posthuman view of the relationship between brain, mind and behaviour underpinned neurophysiological research into consumers from its very beginning in the late nineteenth century. By tracing the biopolitical potentialities......From the 1890s, psychophysiological measurement devices have played an important, but as yet under-theorized role in marketing and consumer research. Because of the recent advances made in neuromarketing, it is often assumed that these measurement devices ushered in a radically new understanding...... of neuromarketing back to the Fin-de-Siècle neurophysiological laboratory, I show that consumers' bodies and later on their brains became reconfigured as part of a dispositif made up of laboratory-based artefacts (measurement devices) and new ways of seeing the human brain and human behaviour. This dispositif...

  14. Measurement-device-independent entanglement-based quantum key distribution (United States)

    Yang, Xiuqing; Wei, Kejin; Ma, Haiqiang; Sun, Shihai; Liu, Hongwei; Yin, Zhenqiang; Li, Zuohan; Lian, Shibin; Du, Yungang; Wu, Lingan


    We present a quantum key distribution protocol in a model in which the legitimate users gather statistics as in the measurement-device-independent entanglement witness to certify the sources and the measurement devices. We show that the task of measurement-device-independent quantum communication can be accomplished based on monogamy of entanglement, and it is fairly loss tolerate including source and detector flaws. We derive a tight bound for collective attacks on the Holevo information between the authorized parties and the eavesdropper. Then with this bound, the final secret key rate with the source flaws can be obtained. The results show that long-distance quantum cryptography over 144 km can be made secure using only standard threshold detectors.

  15. Translation of Device Performance Measurements to Reference Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Osterwald, C. R.


    Translation of photovoltaic performance measurements is required when a measurement is made under conditions which are different from those specified in standard measurement procedures. These specifications can be categorized into three areas: the device temperature at the time of measurement; the total incident irradiance level; and the spectral distribution of the incident irradiance. If these three conditions are identical to those specified in the standard measurement procedures, then no translation is required. However, because in practice the standard measurement conditions can be very difficult (and expensive) to achieve, one or more of these three conditions will generally be different and translation is then necessary.

  16. Temporal accommodation response measured by photorefractive accommodation measurement device (United States)

    Song, Byoungsub; Leportier, Thibault; Park, Min-Chul


    Although accommodation response plays an important role in the human vision system for perception of distance, some three-dimensional (3D) displays offer depth stimuli regardless of the accommodation response. The consequence is that most observers watching 3D displays have complained about visual fatigue. The measurement of the accommodation response is therefore necessary to develop human-friendly 3D displays. However, only few studies about accommodation measurement have been reported. Most of the investigations have been focused on the measurement and analysis of monocular accommodation responses only because the accommodation response works individually in each eye. Moreover, a main eye perceives dominantly the object distance. However, the binocular accommodation response should be examined because both eyes are used to watch the 3D display in natural conditions. The ophthalmic instrument that we developed enabled to measure changes in the accommodation response of the two eyes simultaneously. Two cameras acquired separately the infrared images reflected from each eyes after the reflected beams passed through a cylindrical lens. The changes in the accommodation response could then be estimated from the changes in the astigmatism ratio of the infrared images that were acquired in real time. In this paper, we compared the accommodation responses of main eye between the monocular and the binocular conditions. The two eyes were measured one by one, with only one eye opened, during measurement for monocular condition. Then the two eyes were examined simultaneously for binocular condition. The results showed similar tendencies for main eye accommodation response in both cases.

  17. Constant-Frequency Pulsed Phase-Locked-Loop Measuring Device (United States)

    Yost, William T.; Cantrell, John H.; Kushnick, Peter W.


    Constant-frequency pulsed phase-locked-loop measuring device is sensitive to small changes in phase velocity and easily automated. Based on use of fixed-frequency oscillator in measuring small changes in ultrasonic phase velocity when sample exposed to such changes in environment as changes in pressure and temperature. Automatically balances electrical phase shifts against acoustical phase shifts to obtain accurate measurements of acoustical phase shifts.

  18. A non-invasive device to objectively measure tibial rotation: verification of the device. (United States)

    Lorbach, Olaf; Wilmes, P; Maas, S; Zerbe, T; Busch, L; Kohn, D; Seil, R


    The purpose of this study was the correlation of the results of a new measurement device for tibial rotation (Rotameter) in comparison with the measurements of a knee navigation system as standard method. In a biomechanical laboratory study, all soft tissues were removed from 20 human cadaveric knees leaving only the intact capsule and the bone. Specific tracers were bicortically fixed in the bone in order to measure tibial rotation using a knee navigation system. The knees were fixed to a custom-made inside-boot to rule out undesirable rotation of the reconstruction inside the Rotameter measurement device. Internal and external rotation values were measured at an applied torque of 5, 10 and 15 Nm. The different methods to evaluate tibial rotation were compared using the Pearson correlation coefficient. The correlations were deemed to be reliable if a value of >or=0.80 was achieved. At 5 Nm of applied torque, high correlations for the internal rotation, external rotation and the entire rotational range were found in the Pearson correlation coefficient between the Rotameter testing device in comparison with the knee navigation system as invasive reference method. These results were also confirmed at an applied torque of 10 and 15 Nm. In conclusion, the Rotameter testing device showed high correlations compared with the knee navigation system as an invasive standard method. It might be used as a non-invasive and easy alternative to investigate tibial rotation.

  19. Current trends to measure implant stability. (United States)

    Swami, Vasanthi; Vijayaraghavan, Vasantha; Swami, Vinit


    Implant stability plays a critical role for successful osseointegration. Successful osseointegration is a prerequisite for functional dental implants. Continuous monitoring in an objective and qualitative manner is important to determine the status of implant stability. Implant stability is measured at two different stages: Primary and secondary. Primary stability comes from mechanical engagement with cortical bone. Secondary stability is developed from regeneration and remodeling of the bone and tissue around the implant after insertion and affected by the primary stability, bone formation and remodelling. The time of functional loading is dependent upon the implant stability. Historically the gold standard method to evaluate stability were microscopic or histologic analysis, radiographs, however due to invasiveness of these methods and related ethical issues various other methods have been proposed like cutting torque resistance, reverse torque analysis, model analysis etc. It is, therefore, of an utmost importance to be able to access implant stability at various time points and to project a long term prognosis for successful therapy. Therefore this review focuses on the currently available methods for evaluation of implant stability.

  20. Thalamic DBS with a constant-current device in essential tremor: A controlled clinical trial. (United States)

    Wharen, Robert E; Okun, Michael S; Guthrie, Barton L; Uitti, Ryan J; Larson, Paul; Foote, Kelly; Walker, Harrison; Marshall, Frederick J; Schwalb, Jason; Ford, Blair; Jankovic, Joseph; Simpson, Richard; Dashtipour, Khashayar; Phibbs, Fenna; Neimat, Joseph S; Stewart, R Malcolm; Peichel, DeLea; Pahwa, Rajesh; Ostrem, Jill L


    This study of thalamic deep brain stimulation (DBS) investigated whether a novel constant-current device improves tremor and activities of daily living (ADL) in patients with essential tremor (ET). A prospective, controlled, multicenter study was conducted at 12 academic centers. We investigated the safety and efficacy of unilateral and bilateral constant-current DBS of the ventralis intermedius (VIM) nucleus of the thalamus in patients with essential tremor whose tremor was inadequately controlled by medications. The primary outcome measure was a rater-blinded assessment of the change in the target limb tremor score in the stimulation-on versus stimulation-off state six months following surgery. Multiple secondary outcomes were assessed at one-year follow-up, including motor, mood, and quality-of-life measures. 127 patients were implanted with VIM DBS. The blinded, primary outcome variable (n = 76) revealed a mean improvement of 1.25 ± 1.26 points in the target limb tremor rating scale (TRS) score in the arm contralateral to DBS (p < 0.001). Secondary outcome variables at one year revealed significant improvements (p ≤ 0.001) in quality of life, depression symptoms, and ADL scores. Forty-seven patients had a second contralateral VIM-DBS, and this group demonstrated reduction in second-sided tremor at 180 days (p < 0.001). Serious adverse events related to the surgery included infection (n = 3), intracranial hemorrhage (n = 3), and device explantation (n = 3). Unilateral and bilateral constant-current VIM DBS significantly improves upper extremity tremor, ADL, quality of life, and depression in patients with severe ET. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Experimental measurement-device-independent quantum random-number generation (United States)

    Nie, You-Qi; Guan, Jian-Yu; Zhou, Hongyi; Zhang, Qiang; Ma, Xiongfeng; Zhang, Jun; Pan, Jian-Wei


    The randomness from a quantum random-number generator (QRNG) relies on the accurate characterization of its devices. However, device imperfections and inaccurate characterizations can result in wrong entropy estimation and bias in practice, which highly affects the genuine randomness generation and may even induce the disappearance of quantum randomness in an extreme case. Here we experimentally demonstrate a measurement-device-independent (MDI) QRNG based on time-bin encoding to achieve certified quantum randomness even when the measurement devices are uncharacterized and untrusted. The MDI-QRNG is randomly switched between the regular randomness generation mode and a test mode, in which four quantum states are randomly prepared to perform measurement tomography in real time. With a clock rate of 25 MHz, the MDI-QRNG generates a final random bit rate of 5.7 kbps. Such implementation with an all-fiber setup provides an approach to construct a fully integrated MDI-QRNG with trusted but error-prone devices in practice.

  2. The current situation and development of medical device testing institutes in China. (United States)

    Yang, Xiaofang; Mu, Ruihong; Fan, Yubo; Wang, Chunren; Li, Deyu


    This article analyses the current situation and development of Chinese medical device testing institutes from the perspectives of the two most important functions - testing functions and medical device standardization functions. Areas Covered: The objective of the Chinese government regulations for medical device industry is to ensure the safety and effectiveness of medical devices for Chinese patients. To support the regulation system, the Chinese government has established medical device testing institutes at different levels for example, the national, provincial, and municipal levels. These testing institutes also play an important role in technical support during medical device premarket registration and post market surveillance, they are also the vital practitioners of Chinese medical device standardization. Expert Commentary: Chinese medical device testing institutes are technical departments established by government, and serve the regulatory functions of government agency. In recent years, with the rapid development of medical device industry as well as constantly increasing international and domestic medical device market, the importance of medical device testing institute is more prominent, However, there are still some problems unsolved, such as their overall capacity remains to be improved, construction of standardization is to be strengthened, etc.

  3. Resonant Strip Line BPM for Ultra Low Current Measurements

    CERN Document Server

    Dehler, M


    Proton beams used in proton therapy facilities like PROSCAN have extremely small currents of an order of 1 nA, which create a challenge for a precise beam position measurements due to their extremely low signal level und subsequent bad signal per noise ratios. For suitable power levels with thse currents, pickups need to have a high shunt impedance, something, which is difficult to design for wide band devices. So for a new stripline bpm design, the coupling of the signal outputs to the electrode was deliberately mismatched to create a resonance at the second harmonic of the RF frequency at 150 MHz. The optimum Q-factor to use is given by the coupling between the bpm electrodes leading to to a Q of 100, an overall shunt impedance of 4 kΩ and power output levels of an order of -120 dBm at the design current of 1 nA. A prototype of the devicehas been manufactured, first measurement results will be presented.

  4. Point discharge current measurements beneath dust devils (United States)

    Lorenz, Ralph D.; Neakrase, Lynn D. V.; Anderson, John P.; Harrison, R. Giles; Nicoll, Keri A.


    We document for the first time observations of point discharge currents under dust devils using a novel compact sensor deployed in summer 2016 at the USDA-ARS Jornada Experimental Range in New Mexico, USA. A consistent signature is noted in about a dozen events seen over 40 days, with a positive current ramping up towards closest approach, switching to a decaying negative current as the devil recedes. The currents, induced on a small wire about 10 cm above the ground, correlate with dust devil intensity (pressure drop) and dust loading, and reached several hundred picoAmps.

  5. A new CR-39 nuclear track passive thoron measuring device

    Energy Technology Data Exchange (ETDEWEB)

    Calamosca, M., E-mail: calamosc@enea.i [ENEA-ION-IRP, Montecuccolino, V. dei Colli 16, 40136 Bologna (Italy); Penzo, S. [ENEA-ION-IRP, Montecuccolino, V. dei Colli 16, 40136 Bologna (Italy)


    {sup 220}Rn monitoring in dwellings and in workplaces is seldom performed, both because usually the associated risk is considered negligible and for the difficulties of properly measuring it. As a consequence the state of art of thoron measurements by using solid-state nuclear track detectors shows a significant lag compared with radon. However the demand of determining the thoron contribution to natural dose assessment is worldwide increasing, and in the presence of some building materials as tuff, should be mandatory. To tackle this problem, the ENEA Radon Measuring Service has developed a dose evaluation procedure based on the measurement of the {sup 220}Rn concentration at a standard distance from the wall, by using a new (patent pending) CR-39 alpha track detector thoron passive device (ATD-TnPD), coupled to our own radon passive device (ATD-RnPD). The two devices are geometrically similar and their responses were extensively evaluated to optimise the uncertainty of the thoron measurement. This paper depicts the prime features of the new device, and the introduced changes aimed at reducing the device's equilibrium time constant from 20.8 min to 3.1 min. Since no reliable thoron calibration facility has resulted available up to now, we had to state the ATD-TnPD's sensitivity parameter by performing the calibration step by our own. A closed circuit thoron exposure facility was set up to provide thoron exposures at 3 different levels. The exposed detectors were chemically etched at 7 increasing etching times to study the relationship between sensitivity and etching conditions, so to optimise the detector response and the measurement uncertainty.

  6. 27 CFR 24.36 - Instruments and measuring devices. (United States)


    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Instruments and measuring devices. 24.36 Section 24.36 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Administrative and Miscellaneous Provisions...

  7. Device enables measurement of moments of inertia about three axes (United States)

    Conn, J.


    Device measures moments of inertia of an irregularly shaped mass about three mutually perpendicular axes by the standard pendulum and torque methods. A fixture suspends the test mass at one point and can be adjusted to allow oscillation of the mass.

  8. Multichannel measuring device of deformation for research materials of constructions

    Directory of Open Access Journals (Sweden)

    Druzhinin A.


    Full Text Available Possibility of Atmel ATMega microcontrollers use was shown for the interfacing of sensors devices with the modern computer systems. On the basis of Atmel ATMega16 microcontroller the multichannel system of treatment of information was developed for strain gauges, in which the amount of measuring channels is substantially increased.

  9. Sensor Device for Measuring a Direction of Incident Flow and Evaluation Device Therefor


    Wagner, Hannes; Klüßendorf, Fabian


    The invention relates to a sensor device (4) for measuring a direction of incident flow (2) with which a flowing medium flows against the sensor device (4), having a flow body (1) which is set up to have the flowing medium flow around it, the flow body (1) having a plurality of pressure-sensitive or force-sensitive sensor elements (3) which are arranged on the outer surface of the flow body (1) or are arranged in the flow body (1) and are connected to the outer surface of the flow body (1), a...

  10. Experimental Measurements of Belt Gears in Newly Developed Device

    Directory of Open Access Journals (Sweden)

    Jozef Mascenik


    Full Text Available The paper deals with the alternative of determination of state of the belt gear. To realize themeasurements a newly developed device was designed for measurement and diagnostics of the belt gears. The main task is to detect the V-belt slip expressed by the coefficient of elastic creep and of specific slip with a measuring device. The measurements regarding can be performed if input revolutions of the electric motor and torque of the belt gear are constant whereas the tensioning force of the belt gear changes. It is also possible to perform the measurement if the input revolutions of the electric motor and the tensioning forces are constant and the torque changes.

  11. High-rate measurement-device-independent quantum cryptography

    DEFF Research Database (Denmark)

    Pirandola, Stefano; Ottaviani, Carlo; Spedalieri, Gaetana


    Quantum cryptography achieves a formidable task - the remote distribution of secret keys by exploiting the fundamental laws of physics. Quantum cryptography is now headed towards solving the practical problem of constructing scalable and secure quantum networks. A significant step in this direction...... than those currently achieved. Our protocol could be employed to build high-rate quantum networks where devices securely connect to nearby access points or proxy servers....

  12. Calibration of Laser Beam Direction for Inner Diameter Measuring Device

    Directory of Open Access Journals (Sweden)

    Tongyu Yang


    Full Text Available The laser triangulation method is one of the most advanced methods for large inner diameter measurement. Our research group proposed a kind of inner diameter measuring device that is principally composed of three laser displacement sensors known to be fixed in the same plane measurement position. It is necessary to calibrate the direction of the laser beams that are emitted by laser displacement sensors because they do not meet the theoretical model accurately. For the purpose of calibrating the direction of laser beams, a calibration method and mathematical model were proposed. The inner diameter measuring device is equipped with the spindle of the machine tool. The laser beams rotate and translate in the plane and constitute the rotary rays which are driven to scan the inner surface of the ring gauge. The direction calibration of the laser beams can be completed by the sensors’ distance information and corresponding data processing method. The corresponding error sources are analyzed and the validity of the method is verified. After the calibration, the measurement error of the inner diameter measuring device reduced from ± 25 μ m to ± 15 μ m and the relative error was not more than 0.011%.

  13. Assembly for electrical conductivity measurements in the piston cylinder device (United States)

    Watson, Heather Christine [Dublin, CA; Roberts, Jeffrey James [Livermore, CA


    An assembly apparatus for measurement of electrical conductivity or other properties of a sample in a piston cylinder device wherein pressure and heat are applied to the sample by the piston cylinder device. The assembly apparatus includes a body, a first electrode in the body, the first electrode operatively connected to the sample, a first electrical conductor connected to the first electrode, a washer constructed of a hard conducting material, the washer surrounding the first electrical conductor in the body, a second electrode in the body, the second electrode operatively connected to the sample, and a second electrical conductor connected to the second electrode.

  14. Methane metering devices and systems for continuous measurements

    Energy Technology Data Exchange (ETDEWEB)

    Gralewski, K.; Krupa, M.


    Brief characteristics are presented for the advantages and shortcomings of the existing methane devices and systems developed in the Polish People's Republic, FRG, Great Britain, United States, CSSR and USSR. Among the main requirements made for the modern methane metering devices designed for continuous measurements of methane concentration in the coal mines, requirements such as rapid reaction to the spasmodic change in methane concentration, resistance to contamination of the catalyst, low consumed power etc. are named. Trends are outlined for improvement in the coal industry of the Polish People's Republic.

  15. Development of resistance type moisture measuring device for grains

    Directory of Open Access Journals (Sweden)

    Sadiq Sius LAWAL


    Full Text Available The paper presents a study aimed at developing an indigenous moisture measuring device from locally available materials for grains based on the principle of resistance change of the material with corresponding change in moisture during drying. The developed device has four copper electrode cups positions in which both gauging and dummy copper electrode cups were placed to form Wheatstone bridge circuits of full, half and quarter for four, two and one gauging copper electrode cups respectively, while the remaining positions were used as dummies. These circuits were used to measure the resistances and hence obtaining the moisture content of the grains used. Grains of paddy rice, guinea corn and millet were used to test the device and it was observed that for full bridge circuits of each of the grains, paddy rice have a negative coefficient of correlation of -0.95, -0.99 for guinea corn and -0.99 for millet. The results obtained from predictive empirical equations when compared with the direct oven method, showed that the device can be used to predict or measure moisture content once calibrated.

  16. Extending the GMR Current Measurement Range with a Counteracting Magnetic Field

    Directory of Open Access Journals (Sweden)

    Tin Yan Poon


    Full Text Available Traditionally, current transformers are often used for current measurement in low voltage (LV electrical networks. They have a large physical size and are not designed for use with power electronic circuits. Semiconductor-based current sensing devices such as the Hall sensor and Giant Magnetoresistive (GMR sensor are advantageous in terms of small size, high sensitivity, wide frequency range, low power consumption, and relatively low cost. Nevertheless, the operational characteristics of these devices limit their current measurement range. In this paper, a design based on using counteracting magnetic field is introduced for extending the GMR current measurement range from 9 A (unipolar to ±45 A. A prototype has been implemented to verify the design and the linear operation of the circuit is demonstrated by experimental results. A microcontroller unit (MCU is used to provide an automatic scaling function to optimize the performance of the proposed current sensor.

  17. Device for measurement of thermal emissivity at cryogenic temperatures

    CERN Document Server

    Kralik, Tomas; Musilova, Vera; Srnka, Ales


    In the described device, the thermal emissivity or absorptivity of the sample is measured by substitution of the radiative heat flow between two parallel surfaces by thermal output of a heater. Fast measurements of the mutual emissivity for the range of the temperature of the radiating surface 25 K-150 K are possible. The absorbing surface has a temperature between 5 K and 10 K when LHe is used as cryoliquid. The desired measurement sensitivity is 1 mK for temperature and 0.1 {\\mu}W for heat power, respectively. The diameter of the whole device is 50 mm and so it is possible to use a commercial dewar can for the cooling. The form of the sample is a round plate 40 mm in diameter and 1 mm in thickness with one tested side. The emissivity and its temperature dependency for various surface treatments can be checked immediately before application in a cryogenic system.

  18. Resource-Efficient Measurement-Device-Independent Entanglement Witness (United States)

    Verbanis, E.; Martin, A.; Rosset, D.; Lim, C. C. W.; Thew, R. T.; Zbinden, H.


    Imperfections in experimental measurement schemes can lead to falsely identifying, or over estimating, entanglement in a quantum system. A recent solution to this is to define schemes that are robust to measurement imperfections—measurement-device-independent entanglement witness (MDI-EW). This approach can be adapted to witness all entangled qubit states for a wide range of physical systems and does not depend on detection efficiencies or classical communication between devices. Here we extend the theory to remove the necessity of prior knowledge about the two-qubit states to be witnessed. Moreover, we tested this model via a novel experimental implementation for MDI-EW that significantly reduces the experimental complexity. By applying it to a bipartite Werner state, we demonstrate the robustness of this approach against noise by witnessing entanglement down to an entangled state fraction close to 0.4.

  19. Implementation of a measurement-device-independent entanglement witness. (United States)

    Xu, Ping; Yuan, Xiao; Chen, Luo-Kan; Lu, He; Yao, Xing-Can; Ma, Xiongfeng; Chen, Yu-Ao; Pan, Jian-Wei


    Entanglement, the essential resource in quantum information processing, should be witnessed in many tasks such as quantum computing and quantum communication. The conventional entanglement witness method, relying on an idealized implementation of measurements, could wrongly conclude a separable state to be entangled due to imperfect detections. Inspired by the idea of a time-shift attack, we construct an attack on the conventional entanglement witness process and demonstrate that a separable state can be falsely identified to be entangled. To close such detection loopholes, based on a recently proposed measurement-device-independent entanglement witness method, we design and experimentally demonstrate a measurement-device-independent entanglement witness for a variety of two-qubit states. By the new scheme, we show that an entanglement witness can be realized without detection loopholes.

  20. Methods of measurement for semiconductor materials, process control, and devices (United States)

    Bullis, W. M. (Editor)


    Significant accomplishments include development of a procedure to correct for the substantial differences of transistor delay time as measured with different instruments or with the same instrument at different frequencies; association of infrared response spectra of poor quality germanium gamma ray detectors with spectra of detectors fabricated from portions of a good crystal that had been degraded in known ways; and confirmation of the excellent quality and cosmetic appearance of ultrasonic bonds made with aluminum ribbon wire. Work is continuing on measurement of resistivity of semiconductor crystals; study of gold-doped silicon, development of the infrared response technique; evaluation of wire bonds and die attachment; and measurement of thermal properties of semiconductor devices, delay time and related carrier transport properties in junction devices, and noise properties of microwave diodes.

  1. Liquid Drop Measuring Device for Analyzing Liquid Properties

    Institute of Scientific and Technical Information of China (English)


    Based on the correlation between certain properties of liquid and the properties of the corresponding liquid drop formed under given conditions, a liquid drop measuring device is utilized to monitor the drop formation process of the liquid sample with photoelectric measuring methods. The mechanical and optical characteristic of the liquid is explored with the optical fibers from the internal of the liquid drop during its formation. The drop head capacitor is utilized to monitor the growth process of the liquid drop to gain the drop volume information related to the physical property of liquid. The unique liquid drop trace containing the integrated properties of liquid is generated, and it is proved by experiment that for different liquids their liquid drop traces are different. The analysis on liquid properties and discrimination between different liquids can be proceeded with the liquid drop trace obtained by the liquid drop measuring device.

  2. Improving the accuracy of smart devices to measure noise exposure. (United States)

    Roberts, Benjamin; Kardous, Chucri; Neitzel, Richard


    Occupational noise exposure is one of the most frequent hazards present in the workplace; up to 22 million workers have potentially hazardous noise exposures in the U.S. As a result, noise-induced hearing loss is one of the most common occupational injuries in the U.S. Workers in manufacturing, construction, and the military are at the highest risk for hearing loss. Despite the large number of people exposed to high levels of noise at work, many occupations have not been adequately evaluated for noise exposure. The objective of this experiment was to investigate whether or not iOS smartphones and other smart devices (Apple iPhones and iPods) could be used as reliable instruments to measure noise exposures. For this experiment three different types of microphones were tested with a single model of iPod and three generations of iPhones: the internal microphones on the device, a low-end lapel microphone, and a high-end lapel microphone marketed as being compliant with the International Electrotechnical Commission's (IEC) standard for a Class 2-microphone. All possible combinations of microphones and noise measurement applications were tested in a controlled environment using several different levels of pink noise ranging from 60-100 dBA. Results were compared to simultaneous measurements made using a Type 1 sound level measurement system. Analysis of variance and Tukey's honest significant difference (HSD) test were used to determine if the results differed by microphone or noise measurement application. Levels measured with external microphones combined with certain noise measurement applications did not differ significantly from levels measured with the Type 1 sound measurement system. Results showed that it may be possible to use iOS smartphones and smart devices, with specific combinations of measurement applications and calibrated external microphones, to collect reliable, occupational noise exposure data under certain conditions and within the limitations of the

  3. Real-time precision measuring device of tree diameter growth (United States)

    Guo, Mingming; Chen, Aijun; Li, Dongsheng; Liu, Nan; Yao, Jingyuan


    DBH(diameter at breast height) is an important factor to reflect of the quality of plant growth, also an important parameter indispensable in forest resources inventory and forest carbon sink, the accurate measurement of DBH or not is directly related to the research of forest resources inventory and forest carbon sink. In this paper, the principle and the mathematical model of DBH measurement device were introduced, the fixture measuring device and the hardware circuit for this tree diameter were designed, the measurement software programs were compiled, and the precision measuring device of tree diameter growth was developed. Some experiments with Australia fir were conducted. Based on experiment data, the correlations among the DBH variation of Australian fir, the environment temperature, air humility and PAR(photosynthetically active radiation) were obtained. The effects of environmental parameters (environment temperature, air humility and PAR) on tree diameter were analyzed. Experimental results show that there is a positive correlation between DBH variation of Australian fir and environment temperature, a negative correlation between DBH variation of Australian fir and air humility , so is PAR.

  4. Biomechanical Measurement of Rabbit Cornea by a Modified Scheimpflug Device (United States)

    Zhang, Bo; Gu, Jianjun; Zhang, Xiaoxiao; Yang, Bin


    Purpose. To explore the probability and variation in biomechanical measurements of rabbit cornea by a modified Scheimpflug device. Methods. A modified Scheimpflug device was developed by imaging anterior segment of the model imitating the intact eye at various posterior pressures. The eight isolated rabbit corneas were mounted on the Barron artificial chamber and images of the anterior segment were taken at posterior pressures of 15, 30, 45, 60, and 75 mmHg by the device. The repeatability and reliability of the parameters including CCT, ACD, ACV, and CV were evaluated at each posterior pressure. All the variations of the parameters at the different posterior pressures were calculated. Results. All parameters showed good intraobserver reliability (Cronbach's alpha; intraclass correlation coefficient, α, ICC > 0.96) and repeatability in the modified Scheimpflug device. With the increase of posterior pressures, the ratio of CCT decreased linearly and the bulk modulus gradually reduced to a platform. The increase of ACD was almost linear with the posterior pressures elevated. Conclusions. The modified Scheimpflug device was a valuable tool to investigate the biomechanics of the cornea. The posterior pressure 15–75 mmHg range produced small viscoelastic deformations and nearly linear pressure-deformation response in the rabbit cornea. PMID:27446608

  5. Thermal and Electrodynamic Risk of Residual Current Devices in the Case of Back-Up Protection by Overcurrent Circuit Breakers

    Directory of Open Access Journals (Sweden)

    Stanisław Czapp


    Full Text Available Residual current operated circuit breakers without integral overcurrent protection should be back-up protected. As back-up protection devices, overcurrent circuit breakers are used. The maximum let-through energy and let-through current of the overcurrent devices were evaluated under laboratory conditions. The thermal and electrodynamic risk of residual current devices was analyzed.


    Energy Technology Data Exchange (ETDEWEB)

    Jon P. Christophersen; John L. Morrison; William H. Morrison


    Electrochemical impedance spectroscopy has been shown to be a valuable tool for diagnostics and prognostics of energy storage devices such as batteries and ultra-capacitors. Although measurements have been typically confined to laboratory environments, rapid impedance spectrum measurement techniques have been developed for on-line, embedded applications as well. The prototype hardware for the rapid technique has been validated using lithium-ion batteries, but issues with calibration had also been identified. A new, universal automatic calibration technique was developed to address the identified issues while also enabling a more simplified approach. A single, broad-frequency range is used to calibrate the system and then scaled to the actual range and conditions used when measuring a device under test. The range used for calibration must be broad relative to the expected measurement conditions for the scaling to be successful. Validation studies were performed by comparing the universal calibration approach with data acquired from targeted calibration ranges based on the expected range of performance for the device under test. First, a mid-level shunt range was used for calibration and used to measure devices with lower and higher impedance. Next, a high excitation current level was used for calibration, followed by measurements using lower currents. Finally, calibration was performed over a wide frequency range and used to measure test articles with a lower set of frequencies. In all cases, the universal calibration approach compared very well with results acquired following a targeted calibration. Additionally, the shunts used for the automated calibration technique were successfully characterized such that the rapid impedance measurements compare very well with laboratory-scale measurements. These data indicate that the universal approach can be successfully used for onboard rapid impedance spectra measurements for a broad set of test devices and range of

  7. Quantitatively analyzing dielectrical properties of resins and mapping permittivity variations in CFRP with high-frequency eddy current device technology (United States)

    Gäbler, Simone; Heuer, Henning; Heinrich, Gert; Kupke, Richard


    Eddy current testing is well-established for non-destructive characterization of electrical conductive materials. The development of high-frequency eddy current technology (with frequency ranges up to 100 MHz) made it even possible to extend the classical fields of application towards less conductive materials like CFRP. Maxwell's equations and recent research show that the use of high-frequency eddy current technology is also suitable for non-conductive materials. In that case the change of complex impedance of the probing coil contains information on sample permittivity. This paper shows that even a quantitative measurement of complex permittivity with high-frequency eddy current device technology is possible using an appropriate calibration. Measurement accuracy is comparable to commercial capacitive dielectric analyzers. If the sample material is electrically conductive, both, permittivity and conductivity influence the complex impedance measured with high-frequency eddy current devices. Depending on the measurement setup and the sheet resistance of the sample a parallel characterization of both parameters is possible on isotropic multi-layer materials. On CFRP the permittivity measurement is much more complex due to the capacitive effects between the carbon rovings. However, first results show that at least the local permittivity variations (like those caused by thermal damages) are detectable.

  8. Wave measurement in severe ocean currents

    Digital Repository Service at National Institute of Oceanography (India)

    Diwan, S.G.; Suryavanshi, A.K.; Nayak, B.U.

    from 2 to 5 knots are observed. As a consequence of prevailing high currents, significant drag forces have been experiencEd. by the buoys and their mooring system causing occasional submergence. Some of the mooring systems and the components adopted...

  9. Enhancement of superconducting critical current by injection of quasiparticles in superconductor semiconductor devices

    DEFF Research Database (Denmark)

    Kutchinsky, Jonatan; Taboryski, Rafael Jozef; Sørensen, C. B.


    We report new measurements on 3-terminal superconductor semiconductor injection devices, demonstrating enhancement of the supercurrent by injection from a superconducting injector electrode. Two other electrodes were used as detectors. Applying a small voltage to the injector, reduced the maximum...

  10. Radiation detection and measurement concepts, methods and devices

    CERN Document Server

    McGregor, Douglas


    This text on radiation detection and measurement is a response to numerous requests expressed by students at various universities, in which the most popularly used books do not provide adequate background material, nor explain matters in understandable terms. This work provides a modern overview of radiation detection devices and radiation measurement methods. The topics selected in the book have been selected on the basis of the author’s many years of experience designing radiation detectors and teaching radiation detection and measurement in a classroom environment.

  11. Design and construction of a Faraday cup for measurement of small electronic currents (United States)

    Veyssiere, A.


    The design of a device to measure and integrate very small currents generated by the impact of a charged particle beam upon a Faraday cut is described. The main component is a graphite block capable of stopping practically all the incident changes. The associated electronic apparatus required to measure better than 10/13 ampere with a precision of 10/0 is described.

  12. Single-phase Multilevel Current Source Inverter with Reduced Device Count and Current Balancing Capability

    Directory of Open Access Journals (Sweden)



    Full Text Available Nowadays power converters play an important role in power system and industrial centers. One of the most important and widely used types of conversion is DC to AC conversion that is also called inverters. Generally inverters are divided to voltage source inverter (VSI and current source inverter (CSI. From another view the inverters are divided to two-level and multilevel types. The multilevel inverters are attractive because of their good output waveform quality. However, there has been less attention to multilevel current source inverter (MLCSI when compared with multilevel VSI. In this paper, a new topology for MLCSI is proposed. The proposed topology employs reduced number of switches to generate desired multilevel output current. The proposed MLCSI is capable of balancing the currents of the inductors that are used in the MLCSI structure. A multicarrier PWM based switching strategy is also proposed for the MLCSI. The simulation results using PSCAD/EMTDC as well as the experimental results from a single-phase 5-level CSI laboratory prototype demonstrate its validity.

  13. Feedback Direct Injection Current Readout For Infrared Charge-Coupled Devices (United States)

    Kubo, Kazuya; Wakayama, Hiroyuki; Kajihara, Nobuyuki; Awamoto, Kenji; Miyamoto, Yoshihiro


    We are proposing current readout for infrared charge coupled devices (IRCCDs) which can operate at higher temperatures. Feedback direct injection (FDI) consists of a simple amplifier of gain, AFDI was used in a medium-wavelength IRCCD operating at a high temperature. We made a 64-element HgCdTe linear IRCCD using FDI. The device operates at 195 K with an NETD of 0.5 K.

  14. Pixelated Geiger-Mode Avalanche Photo-Diode Characterization through Dark Current Measurement

    CERN Document Server

    Amaudruz, Pierre-André; Gilhully, Colleen; Goertzen, Andrew; James, Lloyd; Kozlowski, Piotr; Retière, Fabrice; Shams, Ehsan; Sossi, Vesna; Stortz, Greg; Thiessen, Jonathan D; Thompson, Christopher J


    PIXELATED geiger-mode avalanche photodiodes(PPDs), often called silicon photomultipliers (SiPMs) are emerging as an excellent replacement for traditional photomultiplier tubes (PMTs) in a variety of detectors, especially those for subatomic physics experiments, which requires extensive test and operation procedures in order to achieve uniform responses from all the devices. In this paper, we show for two PPD brands, Hamamatsu MPPC and SensL SPM, that the dark noise rate, breakdown voltage and rate of correlated avalanches can be inferred from the sole measure of dark current as a function of operating voltage, hence greatly simplifying the characterization procedure. We introduce a custom electronics system that allows measurement for many devices concurrently, hence allowing rapid testing and monitoring of many devices at low cost. Finally, we show that the dark current of Hamamastu Multi-Pixel Photon Counter (MPPC) is rather independent of temperature at constant operating voltage, hence the current measure...

  15. A Novel Device for Measuring Forces in Endoluminal Procedures

    Directory of Open Access Journals (Sweden)

    Tommaso Ranzani


    Full Text Available In this paper a simple but effective measuring system for endoluminal procedures is presented. The device allows measuring forces during the endoluminal manipulation of tissues with a standard surgical instrument for laparoscopic procedures. The force measurement is performed by recording both the forces applied directly by the surgeon at the instrument handle and the reaction forces on the access port. The measuring system was used to measure the forces necessary for appropriate surgical manipulation of tissues during transanal endoscopic microsurgery (TEM. Ex-vivo and in-vivo measurements were performed, reported and discussed. The obtained data can be used for developing and appropriately dimensioning novel dedicated instrumentation for TEM procedures.

  16. A Novel Device for Measuring Forces in Endoluminal Procedures

    Directory of Open Access Journals (Sweden)

    Tommaso Ranzani


    Full Text Available In this paper a simple but effective measuring system for endoluminal procedures is presented. The device allows measuring forces during the endoluminal manipulation of tissues with a standard surgical instrument for laparoscopic procedures. The force measurement is performed by recording both the forces applied directly by the surgeon at the instrument handle and the reaction forces on the access port. The measuring system was used to measure the forces necessary for appropriate surgical manipulation of tissues during transanal endoscopic microsurgery (TEM. Ex-vivo and in-vivo measurements were performed, reported and discussed. The obtained data can be used for developing and appropriately dimensioning novel dedicated instrumentation for TEM procedures.

  17. Surface photovoltage measurements and finite element modeling of SAW devices.

    Energy Technology Data Exchange (ETDEWEB)

    Donnelly, Christine


    Over the course of a Summer 2011 internship with the MEMS department of Sandia National Laboratories, work was completed on two major projects. The first and main project of the summer involved taking surface photovoltage measurements for silicon samples, and using these measurements to determine surface recombination velocities and minority carrier diffusion lengths of the materials. The SPV method was used to fill gaps in the knowledge of material parameters that had not been determined successfully by other characterization methods. The second project involved creating a 2D finite element model of a surface acoustic wave device. A basic form of the model with the expected impedance response curve was completed, and the model is ready to be further developed for analysis of MEMS photonic resonator devices.

  18. 21 CFR 886.1430 - Ophthalmic contact lens radius measuring device. (United States)


    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic contact lens radius measuring device... lens radius measuring device. (a) Identification. An ophthalmic contact lens radius measuring device is an AC-powered device that is a microscope and dial gauge intended to measure the radius of a...

  19. Current measurement method for characterization of fast switching power semiconductors with Silicon Steel Current Transformer

    DEFF Research Database (Denmark)

    Li, Helong; Beczkowski, Szymon; Munk-Nielsen, Stig


    This paper proposes a novel current measurement method with Silicon Steel Current Transformer (SSCT) for the characterization of fast switching power semiconductors. First, the existing current sensors for characterization of fast switching power semiconductors are experimentally evaluated...

  20. Optical Measurement Techniques for Optical Fiber and Waveguide Devices

    Institute of Scientific and Technical Information of China (English)

    D.Y.; Kim; Y.; Park; N.H.; Seong; Y.C.Youk; J.Y.; Lee; S.; Moon; I.H.; Shin; H.S.; Ryu


    We describe three major optical characterization methods for fiber and fiber devices. A simple servo controlled scanning fiber-optic confocal microscope is proposed for determining the refractive index profile of an optical fiber. To measure the chromatic dispersion of a short length fiber a Mach-Zehnder fiber interferometer with a novel interferometric distance meter is introduced. At the end, a tomographic method is demonstrated for determining the 2-D stress profile of a fiber.

  1. Spin Seebeck measurements of current-induced switching in YIG (United States)

    Bartell, Jason; Jermain, Colin; Aradhya, Sriharsha; Wang, Hailong; Buhrman, Robert; Yang, Fengyuan; Ralph, Daniel; Fuchs, Gregory

    Quantifying spin torques generated at the interface between a normal metal (NM) and a ferromagnetic insulator (FI) is an important step in understanding the spin hall effect without charge transport. Measuring magnetization in NM/FI devices is challenging, however, because both magnetoresistive and magneto-optical signals are tiny in thin-film bilayers. We show that a promising alternative measurement approach is the use of picosecond thermal gradients to study spin torques in Pt/Yttrium Iron Garnet (YIG) bilayers. Recently, we demonstrated the application of heat to stroboscopically transduce a local magnetic moment into an electrical signal via the time resolved anomalous Nernst effect (TRANE) in ferromagnetic metals. Using a similar geometry the spin Seebeck effect of YIG combined with the inverse spin Hall effect of Pt enables measurement of local magnetization. Here we describe our study using this technique to study current-induced switching in Pt/YIG with sub-10 nm thick YIG films We acknowledge support from AFOSR.

  2. Post market surveillance in the german medical device sector - current state and future perspectives. (United States)

    Zippel, Claus; Bohnet-Joschko, Sabine


    Medical devices play a central role in the diagnosis and treatment of diseases but also bring the potential for adverse events, hazards or malfunction with serious consequences for patients and users. Medical device manufacturers are therefore required by law to monitor the performance of medical devices that have been approved by the competent authorities (post market surveillance). Conducting a nationwide online-survey in the German medical device sector in Q2/2014 in order to explore the current status of the use of post market instruments we obtained a total of 118 complete data sets, for a return rate of 36%. The survey included manufacturers of different sizes, producing medical devices of all risk classes. The post market instruments most frequently reported covered the fields of production monitoring and quality management as well as literature observation, regulatory vigilance systems, customer knowledge management and market observation while Post Market Clinical Follow-up and health services research were being used less for product monitoring. We found significant differences between the different risk classes of medical devices produced and the intensity of use of post market instruments. Differences between company size and the intensity of instruments used were hardly detected. Results may well contribute to the development of device monitoring which is a crucial element of the policy and regulatory system to identify device-related safety issues. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Extending the GMR Current Measurement Range with a Counteracting Magnetic Field


    Tin Yan Poon; Ricky Wing Hong Lau; Norman Chung Fai Tse


    Traditionally, current transformers are often used for current measurement in low voltage (LV) electrical networks. They have a large physical size and are not designed for use with power electronic circuits. Semiconductor-based current sensing devices such as the Hall sensor and Giant Magnetoresistive (GMR) sensor are advantageous in terms of small size, high sensitivity, wide frequency range, low power consumption, and relatively low cost. Nevertheless, the operational characteristics of th...

  4. Analysis of Current Source PWM Inverter for Different Levels with No-Insulating Switching Device


    Kumar Abhishek; K.Parkavi Kathirvelu; Balasubramanian, R.


    This paper gives the new set-up of inverter having DC current source (CSI) having no insulated switching device. In the proposed new CSI topology every switching device are connected across a common-source level, thus a single power supply gate drive circuit is required and no insulated power supply and the customary bootstrap circuit is applied. This CSI topology is even legitimate for utmost level of current waveform output, where the power switches number increases. As a turn up, gate driv...


    Directory of Open Access Journals (Sweden)

    Matúš Košinár


    Full Text Available The paper presents an innovative method of data processing from the measurement device – Ballbar QC20W. It was created with a program for data transformation (Visual Basic.NET and it used Fourier transformation. The paper deals with the measuring method of CNC machine tools using Ballbar QC20W. There is an influence between qualitative parameters of machine tools and qualitative parameters of products (tolerances, roughness, etc.. It is very important to hold the stability of qualitative parameters of products as a key factor of production quality. Therefore, is also important to evaluate the accuracy of machine tools and make prediction of possible accuracy.

  6. Planar Homojunction Gallium Nitride (GaN) P-i-N Device Evaluated for Betavoltaic Energy Conversion: Measurement and Analysis (United States)


    Autoranging picoammeter ( error = 0.4%, resolution = 0.1 pA, 100 pA ± 4.4 pA). Between each measurement , the accelerating voltage was changed and the...characteristics of ideal diode behavior relative to leakage current. Device 33 leakage current was too high, preventing us from measuring output current...Betavoltaic Energy Conversion: Measurement and Analysis by M Litz, W Ray, J Russo, S Kelley, and J Smith Approved for public


    Directory of Open Access Journals (Sweden)

    U. Batygin


    Full Text Available The technique of numerical processing of measurement results of pulse currents by means of Rogovsky belt application is offered in the given work. It is shown that at measurement of signals by digital oscillographs and further numerical transformation of target signals, the possibilities of Rogovsky belt without the application of additional devices that in turn allows to define parameters of pulse currents with any peak-time characteristics essentially expand.

  8. Low profile, highly configurable, current sharing paralleled wide band gap power device power module (United States)

    McPherson, Brice; Killeen, Peter D.; Lostetter, Alex; Shaw, Robert; Passmore, Brandon; Hornberger, Jared; Berry, Tony M


    A power module with multiple equalized parallel power paths supporting multiple parallel bare die power devices constructed with low inductance equalized current paths for even current sharing and clean switching events. Wide low profile power contacts provide low inductance, short current paths, and large conductor cross section area provides for massive current carrying. An internal gate & source kelvin interconnection substrate is provided with individual ballast resistors and simple bolted construction. Gate drive connectors are provided on either left or right size of the module. The module is configurable as half bridge, full bridge, common source, and common drain topologies.

  9. TOPICAL REVIEW: Current-driven dynamics in molecular-scale devices (United States)

    Seideman, Tamar


    We review recent theoretical work on current-triggered processes in molecular-scale devices - a field at the interface between solid state physics and chemical dynamics with potential applications in diverse areas, including artificial molecular machines, unimolecular transport, surface nanochemistry and nanolithography. The qualitative physics underlying current-triggered dynamics is first discussed and placed in context with several well-studied phenomena with which it shares aspects. A theory for modelling these dynamics is next formulated within a time-dependent scattering approach. Our end result provides useful insight into the system properties that determine the reaction outcome as well as a computationally convenient framework for numerical realization. The theory is applied to study single-molecule surface reactions induced by a scanning tunnelling microscope and current-triggered dynamics in single-molecule transistors. We close with a discussion of several potential applications of current-induced dynamics in molecular devices and several opportunities for future research.

  10. An unheated permeation device for calibrating atmospheric VOC measurements

    Directory of Open Access Journals (Sweden)

    J. Brito


    Full Text Available The development of an unpowered permeation device for continuous calibration of in-situ instruments measuring atmospheric volatile organic compounds (VOCs is described. Being lightweight and compact, and containing only negligible amounts of chemicals, the device is especially suited for field use such as onboard aircraft. Its speciality is to maintain the permeation process in thermal equilibrium, i.e. the instantaneous permeation rate can be ascribed via a simple temperature measurement. This equilibrium state is maintained by a combination of three features: (i a thin PTFE membrane as permeation medium which guarantees short stabilization times, (ii a water bath as heat buffer, and (iii a vacuum-panel based insulation, in which features (ii and (iii minimize temperature drifts. The uncertainty of the permeation rate due to thermal non-equilibrium is kept below 1 %. An extensive theory part details the major permeation processes of gases through porous polymers, being Fick's diffusion, Knudsen flow, and viscous flow. Both the measured stabilization time and the measured temperature dependence of the permeation rate independently indicate that the permeation can be described by a viscous flow model, where diffusion of the gas molecules in large pores (having a diameter of >0.05 μm dominates.

  11. An unheated permeation device for calibrating atmospheric VOC measurements

    Directory of Open Access Journals (Sweden)

    J. Brito


    Full Text Available The development of an unpowered permeation device for continuous calibration of in-situ instruments measuring atmospheric volatile organic compounds (VOCs is described. Being lightweight and compact, and containing only negligible amounts of chemicals, the device is especially suited for field use such as on board aircraft. Its speciality is to maintain the permeation process in thermal equilibrium, so that the instantaneous permeation rate can be ascribed to a simple temperature measurement. This equilibrium state is maintained by a combination of three features: (i a thin PTFE membrane as permeation medium which guarantees short stabilization times, (ii a water bath as heat buffer, and (iii a vacuum-panel based insulation, in which features (ii and (iii minimize temperature drifts to ~30 mK h−1 per Kelvin temperature difference to the environment. The respective uncertainty of the permeation rate due to thermal non-equilibrium is kept below 1%. An extensive theory part details the major permeation processes of gases through porous polymers, being Fick's diffusion, Knudsen flow, and viscous flow. Both the measured stabilization time and the measured temperature dependence of the permeation rate independently indicate that the permeation can be described by a viscous flow model, where diffusion of the gas molecules in large pores (having a diameter of >0.05 μm dominates.

  12. Simulation of ion beam induced current in radiation detectors and microelectronic devices.

    Energy Technology Data Exchange (ETDEWEB)

    Vizkelethy, Gyorgy


    Ionizing radiation is known to cause Single Event Effects (SEE) in a variety of electronic devices. The mechanism that leads to these SEEs is current induced by the radiation in these devices. While this phenomenon is detrimental in ICs, this is the basic mechanism behind the operation of semiconductor radiation detectors. To be able to predict SEEs in ICs and detector responses we need to be able to simulate the radiation induced current as the function of time. There are analytical models, which work for very simple detector configurations, but fail for anything more complex. On the other end, TCAD programs can simulate this process in microelectronic devices, but these TCAD codes costs hundreds of thousands of dollars and they require huge computing resources. In addition, in certain cases they fail to predict the correct behavior. A simulation model based on the Gunn theorem was developed and used with the COMSOL Multiphysics framework.

  13. Instrumentation for Gate Current Noise Measurements on sub-100 nm MOS Transistors

    CERN Document Server

    Gaioni, L; Ratti, L; Re, V; Speziali, V; Traversi, G


    This work describes a measuring system that was developed to characterize the gate current noise performances of CMOS devices with minimum feature size in the 100 nm span. These devices play an essential role in the design of present daymixedsignal integrated circuits, because of the advantages associated with the scaling process. The reduction in the gate oxide thickness brought about by CMOS technology downscaling leads to a non-negligible gate current due to direct tunneling phenomena; this current represents a noise source which requires an accurate characterization for optimum analog design. In this paper, two instruments able to perform measurements in two different ranges of gate current values will be discussed. Some of the results of gate current noise characterization will also be presented.

  14. Assessment of Current Practice for Tank Testing of Small Marine Energy Devices

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter

    Discussion Report. Equitable Testing and Evaluation of Marine Energy Extraction Devices in terms of Performance, Cost and Environmental Impact. The report is a contribution by Aalborg University (AAU) to the deliverable on Assessment of current practice for tank testing of small marine energy...

  15. Superhydrophobic SAM Modified Electrodes for Enhanced Current Limiting Properties in Intrinsic Conducting Polymer Surge Protection Devices. (United States)

    Jabarullah, Noor H; Verrelli, Emanuele; Mauldin, Clayton; Navarro, Luis A; Golden, Josh H; Madianos, Leonidas M; Kemp, Neil T


    Surface interface engineering using superhydrophobic gold electrodes made with 1-dodecanethiol self-assembled monolayer (SAM) has been used to enhance the current limiting properties of novel surge protection devices based on the intrinsic conducting polymer, polyaniline doped with methanesulfonic acid. The resulting devices show significantly enhanced current limiting characteristics, including current saturation, foldback, and negative differential effects. We show how SAM modification changes the morphology of the polymer film directly adjacent to the electrodes, leading to the formation of an interfacial compact thin film that lowers the contact resistance at the Au-polymer interface. We attribute the enhanced current limiting properties of the devices to a combination of lower contact resistance and increased Joule heating within this interface region which during a current surge produces a current blocking resistive barrier due to a thermally induced dedoping effect caused by the rapid diffusion of moisture away from this region. The effect is exacerbated at higher applied voltages as the higher temperature leads to stronger depletion of charge carriers in this region, resulting in a negative differential resistance effect.

  16. Measurement device for ankle joint kinematic and dynamic characterisation. (United States)

    Giacomozzi, C; Cesinaro, S; Basile, F; De Angelis, G; Giansanti, D; Maccioni, G; Masci, E; Panella, A; Paolizzi, M; Torre, M; Valentini, P; Macellari, V


    The paper describes a measurement device for obtaining the kinematic characterisation and isometric loading of ankle joints under different working conditions. Non-invasive, in vivo experiments can be conducted with this experimental apparatus, the potential of which could be usefully exploited in basic biomedical research, prosthesis design, clinical applications, sports medicine and rehabilitation. The device determines the 3D movement of the foot with respect to the shank and evaluates the torques and moments around the three articular axes in relation to any desired angular position of the ankle complex. When integrated with superficial electromyographic techniques and electrical stimulation, it allows the assessment of the functionality of the lower leg in both mechanical and myo-electrical terms. The paper reports the main mechanical and electronic features of the device (high linearity; maximum moment ranges +/- 300 Nm for flexion-extension, +/- 35 Nm for both pronation-supination and internal-external rotation; angular ranges: +/- 100 degrees of dorsi-plantar flexion, +/- 50 degrees of internal-external rotation and prono-supination; linear ranges: +/- 25 mm along each axis). Results from a healthy volunteer, under voluntary or stimulated conditions, helped in testing its operatability, reliability, robustness, repeatability and effectiveness. Preliminary simplified protocols have been also applied to 20 healthy volunteers, and the main results were 80.8 +/- 11.9 degrees of internalexternal rotation, 46.2 +/- 9.1 degrees of prono-supination and 74.6 +/- 13.1 degrees of flexion-extension. Torques and moments were normalised with respect to a body mass index of 30. The maximum plantar flexion moment (57.5 + 21.3 Nm) was measured with the foot at 150 of dorsal flexion; the maximum dorsal flexion moment (50.2 + 20.3 Nm) was measured with the foot at 150 of plantar flexion.

  17. Alternative schemes for measurement-device-independent quantum key distribution

    CERN Document Server

    Ma, Xiongfeng


    A practical scheme for measurement-device-independent quantum key distribution using phase and path/time encoding is presented. In addition to immunity to existing loopholes in detection systems, our setup employs simple encoding and decoding modules without relying on polarization maintenance or optical switches. Moreover, by handling, with a modified sifting technique, the dead time limitations in single-photon detectors, our scheme can be run with only two single-photon detectors. With a phase-post-selection technique, a decoy-state variant of our scheme is also proposed, whose secret key generation rate scales linearly with the channel transmittance.

  18. Measuring the Magnetic Force on a Current-Carrying Conductor. (United States)

    Herreman, W.; Huysentruyt, R.


    Describes a fast and simple method for measuring the magnetic force acting on a current-carrying conductor using a digital balance. Discusses the influence of current intensity and wire length on the magnetic force on the conductor. (JRH)

  19. Principle and experimental investigation of current-driven negative-inductance superconducting quantum interference device (United States)

    Li, Hao; Liu, Jianshe; Zhang, Yingshan; Cai, Han; Li, Gang; Liu, Qichun; Han, Siyuan; Chen, Wei


    A negative-inductance superconducting quantum interference device (nSQUID) is an adiabatic superconducting logic device with high energy efficiency, and therefore a promising building block for large-scale low-power superconducting computing. However, the principle of the nSQUID is not that straightforward and an nSQUID driven by voltage is vulnerable to common mode noise. We investigate a single nSQUID driven by current instead of voltage, and clarify the principle of the adiabatic transition of the current-driven nSQUID between different states. The basic logic operations of the current-driven nSQUID with proper parameters are simulated by WRspice. The corresponding circuit is fabricated with a 100 A cm‑2 Nb-based lift-off process, and the experimental results at low temperature confirm the basic logic operations as a gated buffer.

  20. Modeling and Simulation of the Current Quenching Behavior of a Line Lightning Protection Device

    CERN Document Server

    Mürmann, Mario; Fuchs, Roman; Nefedov, Alexander; Nordborg, Henrik


    We develop a consistent model for a Line Lightning Protection Device and demonstrate that this model can explain the two modes of current quenching -- impulse quenching and current zero quenching -- observed in such devices. A dimensional analysis shows that impulse quenching can always be obtained if the power loss from the electric arcs is large enough as compared to $U_0 I_f$, where $U_0$ is the grid voltage and $I_f$ is the maximum follow current after a lightning strike. We further show that the two modes of quenching can be reproduced in a full 3D arc simulations coupled to the appropriate circuit model. This means the arc simulations can be used for optimization and development of future LLPDs.

  1. Modeling the current-voltage characteristics of bilayer polymer photovoltaic devices (United States)

    Barker, J. A.; Ramsdale, C. M.; Greenham, N. C.


    We have developed a numerical model to predict the current-voltage curves of bilayer conjugated polymer photovoltaic devices. The model accounts for charge photogeneration, injection, drift, diffusion, and recombination, and includes the effect of space charge on the electric field within the device. Charge separation at the polymer-polymer interface leads to the formation of bound polaron pairs which may either recombine monomolecularly or be dissociated into free charges, and we develop expressions for the field dependence of the dissociation rate. We find that the short-circuit quantum efficiency is determined by the competition between polaron pair dissociation and recombination. The model shows a logarithmic dependence of the open-circuit voltage on the incident intensity, as seen experimentally. This additional intensity-dependent voltage arises from the field required to produce a drift current that balances the current due to diffusion of carriers away from the interface.

  2. Current density distribution mapping in PEM fuel cells as an instrument for operational measurements

    Energy Technology Data Exchange (ETDEWEB)

    Geske, M.; Heuer, M.; Heideck, G.; Styczynski, Z. A. [Otto-von-Guericke University Magdeburg, Chair Electric Power Networks and Renewable Energy Sources, Magdeburg (Germany)


    A newly developed measurement system for current density distribution mapping has enabled a new approach for operational measurements in proton exchange membrane fuel cells (PEMFC). Taking into account previously constructed measurement systems, a method based on a multi layer printed circuit board was chosen for the development of the new system. This type of system consists of a sensor, a special electronic device and the control and visualization PC. For the acquisition of the current density distribution values, a sensor device was designed and installed within a multilayer printed circuit board with integrated shunt resistors. Varying shunt values can be taken into consideration with a newly developed and evaluated calibration method. The sensor device was integrated in a PEM fuel cell stack to prove the functionality of the whole measurement system. A software application was implemented to visualize and save the measurement values. Its functionality was verified by operational measurements within a PEMFC system. Measurement accuracy and possible negative reactions of the sensor device during PEMFC operation are discussed in detail in this paper. The developed system enables operational measurements for different operating phases of PEM fuel cells. Additionally, this can be seen as a basis for new opportunities of optimization for fuel cell design and operation modes. (author)

  3. Current Density Distribution Mapping in PEM Fuel Cells as An Instrument for Operational Measurements

    Directory of Open Access Journals (Sweden)

    Martin Geske


    Full Text Available A newly developed measurement system for current density distribution mapping has enabled a new approach for operational measurements in proton exchange membrane fuel cells (PEMFC. Taking into account previously constructed measurement systems, a method based on a multi layer printed circuit board was chosen for the development of the new system. This type of system consists of a sensor, a special electronic device and the control and visualization PC. For the acquisition of the current density distribution values, a sensor device was designed and installed within a multilayer printed circuit board with integrated shunt resistors. Varying shunt values can be taken into consideration with a newly developed and evaluated calibration method. The sensor device was integrated in a PEM fuel cell stack to prove the functionality of the whole measurement system. A software application was implemented to visualize and save the measurement values. Its functionality was verified by operational measurements within a PEMFC system. Measurement accuracy and possible negative reactions of the sensor device during PEMFC operation are discussed in detail in this paper. The developed system enables operational measurements for different operating phases of PEM fuel cells. Additionally, this can be seen as a basis for new opportunities of optimization for fuel cell design and operation modes.

  4. Microfluidic device for cell capture and impedance measurement. (United States)

    Jang, Ling-Sheng; Wang, Min-How


    This work presents a microfluidic device to capture physically single cells within microstructures inside a channel and to measure the impedance of a single HeLa cell (human cervical epithelioid carcinoma) using impedance spectroscopy. The device includes a glass substrate with electrodes and a PDMS channel with micro pillars. The commercial software CFD-ACE+ is used to study the flow of the microstructures in the channel. According to simulation results, the probability of cell capture by three micro pillars is about 10%. An equivalent circuit model of the device is established and fits closely to the experimental results. The circuit can be modeled electrically as cell impedance in parallel with dielectric capacitance and in series with a pair of electrode resistors. The system is operated at low frequency between 1 and 100 kHz. In this study, experiments show that the HeLa cell is successfully captured by the micro pillars and its impedance is measured by impedance spectroscopy. The magnitude of the HeLa cell impedance declines at all operation voltages with frequency because the HeLa cell is capacitive. Additionally, increasing the operation voltage reduces the magnitude of the HeLa cell because a strong electric field may promote the exchange of ions between the cytoplasm and the isotonic solution. Below an operating voltage of 0.9 V, the system impedance response is characteristic of a parallel circuit at under 30 kHz and of a series circuit at between 30 and 100 kHz. The phase of the HeLa cell impedance is characteristic of a series circuit when the operation voltage exceeds 0.8 V because the cell impedance becomes significant.

  5. Recanalization of Chronic Total Occlusion Lesions: A Critical Appraisal of Current Devices and Techniques (United States)


    Chronic Total Occlusion (CTO) has been considered as one of the “final frontier” in interventional cardiology. Until recently, the patients with CTO are often managed surgically or medically due to lack of published evidence of clinical benefits and lower success rate of percutaneous recanalization of CTO. However, the introduction of enhanced guidewires, microcatheters combined with novel specialized devices and techniques reduce the number of unapproachable CTO. In this review article, current techniques and devices of percutaneous recanalization of CTO have been systematically summarized, which may help budding interventional cardiologists to theoretically understand these complex procedures and to deliver safe and effective percutaneous management of CTO to the patients. PMID:27790503

  6. Device for measuring hole elongation in a bolted joint (United States)

    Wichorek, Gregory R. (Inventor)


    A device to determine the operable failure mode of mechanically fastened lightweight composite joints by measuring the hole elongation of a bolted joint is disclosed. The double-lap joint test apparatus comprises a stud, a test specimen having a hole, two load transfer plates, and linear displacement measuring instruments. The test specimen is sandwiched between the two load transfer plates and clamped together with the stud. Spacer washers are placed between the test specimen and each load transfer plate to provide a known, controllable area for the determination of clamping forces around the hole of the specimen attributable to bolt torque. The spacer washers also provide a gap for the mounting of reference angles on each side of the test specimen. Under tensile loading, elongation of the hole of the test specimen causes the stud to move away from the reference angles. This displacement is measured by the voltage output of two linear displacement measuring instruments that are attached to the stud and remain in contact with the reference angles throughout the tensile loading. The present invention obviates previous problems in obtaining specimen deformation measurements by monitoring the reference angles to the test specimen and the linear displacement measuring instruments to the stud.

  7. A Device to Measure the Propulsive Power of Nematodes

    CERN Document Server

    Yuan, J; Gnatt, M; Raizen, D M; Bau, H H


    In the fluid dynamics video, we present a microfluidic device to measure the propulsive power of nematodes. The device consists of a tapered conduit filled with aqueous solution. The conduit is subjected to a DC electric field with the negative pole at the narrow end and to pressure-driven flow directed from the narrow end. The nematode is inserted at the conduit's wide end. Directed by the electric field (through electrotaxis), the nematode swims deliberately upstream toward the negative pole of the DC field. As the conduit narrows, the average fluid velocity and the drag force on the nematode increase. Eventually, the nematode arrives at an equilibrium position, at which its propulsive force balances the viscous drag force induced by the adverse flow. The equilibrium position of different animals, with similar body lengths, was measured as a function of the flow rate. The flow field around the nematode was obtained by direct numerical simulations with the experimentally imaged gait and the tapered geometry ...

  8. Development of a continuous aerosol mass concentration measurement device. (United States)

    Bémer, D; Thomas, D; Contal, P; Subra, I


    A dynamic aerosol mass concentration measurement device has been developed for personal sampling. Its principle consists in sampling the aerosol on a filter and monitoring the change of pressure drop over time (Delta P). Ensuring that the linearity of the Delta P = f(mass of particles per unit area of filter) relationship has been well established, the change of concentration can be deduced. The response of the system was validated in the laboratory with a 3.5 microm alumina aerosol (mass median diameter) generated inside a 1-m(3) ventilated enclosure. As the theory predicted that the mass sensitivity of the system would vary inversely with the square of the particle diameter, only sufficiently fine aerosols were able to be measured. The system was tested in the field in a mechanical workshop in the vicinity of an arc-welding station. The aerosol produced by welding is indeed particularly well-adapted due to the sub-micronic size of the particles. The device developed, despite this limitation, has numerous advantages over other techniques: robustness, compactness, reliability of calibration, and ease of use.

  9. Design of a Device for Sky Light Polarization Measurements

    Directory of Open Access Journals (Sweden)

    Yujie Wang


    Full Text Available ky polarization patterns can be used both as indicators of atmospheric turbidity and as a sun compass for navigation. The objective of this study is to improve the precision of sky light polarization measurements by optimal design of the device used. The central part of the system is composed of a Charge Coupled Device (CCD camera; a fish-eye lens and a linear polarizer. Algorithms for estimating parameters of the polarized light based on three images are derived and the optimal alignments of the polarizer are analyzed. The least-squares estimation is introduced for sky light polarization pattern measurement. The polarization patterns of sky light are obtained using the designed system and they follow almost the same patterns of the single-scattering Rayleigh model. Deviations of polarization angles between observation and the theory are analyzed. The largest deviations occur near the sun and anti-sun directions. Ninety percent of the deviations are less than 5° and 40% percent of them are less than 1°. The deviations decrease evidently as the degree of polarization increases. It also shows that the polarization pattern of the cloudy sky is almost identical as in the blue sky.

  10. Highly efficient electrophosphorescence devices based on iridium complexes with high efficiency over a wide range of current densities

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Liying; Li Bin; Hong Ziruo [Key Laboratory of Excited State Processes, Changchun Institute of Optics, Fine Mechanics and Physics, Changchun 130033 (China); Chen Ping; Liu Shiyong [State Key Lab of Integrated Optoelectronics, Jilin University, Changchun 130023 (China)], E-mail:, E-mail:


    Three new luminescent cyclometalated iridium (II I) complexes are successfully synthesized. The cyclometalated ligand used here is 2-(2-fluorophenyl)-benzothiazole (F-BT). The auxiliary ligands are acetylacetone (acac), 1,1,1-trifluoroacetylaceton (3F-acac), 1,1,1,5,5,5-hexafluoroacetylacetone (6F-acac), respectively. All complexes exhibit bright photoluminescence at room temperature. Organic light-emitting diodes are fabricated by doping the iridium (III) complexes in 4, 4' -N, N'-dicarbazole-biphenyl (CBP), and the device characteristics are investigated. Among these devices, the performances of the optimized devices based on 1 at high current density are among the best reported for devices with iridium (III) complexes as emitters. EL efficiencies show weak dependence on doping concentration and current density. The optimized device exhibits a peak current efficiency of 28.5 cd A{sup -1} and a power efficiency of 11.2 lm W{sup -1}, respectively, at 20 mA cm{sup -2}, an efficiency of 22.7 cd A{sup -1} at 100 mA cm{sup -2}, 80% of the maximum, can be achieved. Short triplet decay time of 1 measured in solid films is supposed to be responsible for the minor loss in EL efficiency, which suggests depressed triplet-triplet annihilation and site saturation of the phosphor. Efficient exciton formation on the molecules of 1 by direct charge trapping and confinement within the emissive layer also make for outstanding electrophosphorescent performances.

  11. Weak measurement from the electron displacement current: new path for applications (United States)

    Marian, D.; Colomés, E.; Zanghì, N.; Oriols, X.


    The interest on weak measurements is rapidly growing during the last years as a unique tool to better understand and predict new quantum phenomena. Up to now many theoretical and experimental weak-measurement techniques deal with (relativistic) photons or cold atoms, but there is much less investigation on (non-relativistic) electrons in up-to-date electronics technologies. We propose a way to perform weak measurements in nanoelectronic devices through the measurement of the total current (particle plus displacement component) in such devices. We study the interaction between an electron in the active region of a electron device with a metal surface working as a sensing electrode by means of the (Bohmian) conditional wave function. We perform numerical (Monte Carlo) simulations to reconstruct the Bohmian trajectories in the iconic double slit experiment. This work opens new paths for understanding the quantum properties of an electronic system as well as for exploring new quantum engineering applications in solid state physics.

  12. Biasing, operation and parasitic current limitation in single device equivalent to CMOS, and other semiconductor systems (United States)

    Welch, James D.


    Disclosed are semiconductor devices including at least one junction which is rectifying whether the semiconductor is caused to be N or P-type, by the presence of applied gate voltage field induced carriers in essentially intrinsic, essentially homogeneously simultaneously containing both N and P-type metallurgical dopants at substantially equal doping levels, essentially homogeneously simultaneously containing both N and P-type metallurgical dopants at different doping levels, and containing a single metallurgical doping type, and functional combinations thereof. In particular, inverting and non-inverting gate voltage channel induced semiconductor single devices with operating characteristics similar to conventional multiple device CMOS systems, which can be operated as modulators, are disclosed as are a non-latching SCR and an approach to blocking parasitic currents utilizing material(s) which form rectifying junctions with both N and P-type semiconductor whether metallurigically or field induced.

  13. Novel Alternating Current Electroluminescent Devices with an Asymmetric Structure Based on a Polymer Heterojunction

    Institute of Scientific and Technical Information of China (English)

    谭海曙; 姚建铨; 王昕; 王鹏; 谢洪泉


    Novel alternating current electroluminescent devices with an asymmetric structure are successfully fabricated by using a hole-type polymer, poly(2,5-bis (dodecyloxy)-phenylenevinylene) (PDDOPV), and an electron-type polymer, poly(phenyl quinoxaline) (PPQ). The performance of the polymer devices with heteto junctions under ac operation is insensitive to the thickness of the two polymer layers, compared to that under dc operation. This new advantage means easy and cheap production facility on a large scale in the near future. Different emission spectra are obtained when our ac devices are operated in an ac mode, forward or reverse bias. The emission spectrum at reverse bias includes two parts: one from PDDOPV and the other from PPQ.

  14. Thermal analytic model of current gain for bipolar junction transistor-bipolar static induction transistor compound device

    Institute of Scientific and Technical Information of China (English)

    Zhang You-Run; Zhang Bo; Li Ze-Hong; Lai Chang-Jin; Li Zhao-Ji


    This paper proposes a thermal analytical model of current gain for bipolar junction transistor-bipolar static induction transistor (BJT-BSIT) compound device in the low current operation. It also proposes a best thermal compensating factor to the compound device that indicates the relationship between the thermal variation rate of current gain and device structure. This is important for the design of compound device to be optimized. Finally, the analytical model is found to be in good agreement with numerical simulation and experimental results. The test results demonstrate that thermal variation rate of current gain is below 10% in 25℃C-85℃ and 20% in -55℃-25℃.

  15. SQUID based cryogenic current comparator for measurements of the dark current of superconducting cavities

    Energy Technology Data Exchange (ETDEWEB)

    Vodel, W.; Nietzsche, S.; Neubert, R.; Nawrodt, R. [Friedrich Schiller Univ. Jena (Germany); Peters, A. [GSI Darmstadt (Germany); Knaack, K.; Wendt, M.; Wittenburg, K. [DESY Hamburg (Germany)


    The linear accelerator technology, based on super-conducting L-band (1.3 GHz) is currently under study at DESY (Hamburg, Germany). The two 10 km long main Linacs will be equipped with a total of nearly 20.000 cavities. The dark current due to the emission of electrons in these high gradient field super-conducting cavities is an unwanted particle source. A newly high performance SQUID based measurement system for detecting dark currents is proposed. It makes use of the Cryogenic Current Comparator principle and senses dark currents in the pA range with a measurement bandwidth of up to 70 kHz. The use of a cryogenic current comparator as dark current sensor has some important advantages: -) the measurement of the absolute value of the dark current, -) the non-dependence on the electron trajectories, -) the accurate absolute calibration with an additional wire loop, and -) extremely high resolution.

  16. Testing limits to airflow perturbation device (APD measurements

    Directory of Open Access Journals (Sweden)

    Jamshidi Shaya


    Full Text Available Abstract Background The Airflow Perturbation Device (APD is a lightweight, portable device that can be used to measure total respiratory resistance as well as inhalation and exhalation resistances. There is a need to determine limits to the accuracy of APD measurements for different conditions likely to occur: leaks around the mouthpiece, use of an oronasal mask, and the addition of resistance in the respiratory system. Also, there is a need for resistance measurements in patients who are ventilated. Method Ten subjects between the ages of 18 and 35 were tested for each station in the experiment. The first station involved testing the effects of leaks of known sizes on APD measurements. The second station tested the use of an oronasal mask used in conjunction with the APD during nose and mouth breathing. The third station tested the effects of two different resistances added in series with the APD mouthpiece. The fourth station tested the usage of a flexible ventilator tube in conjunction with the APD. Results All leaks reduced APD resistance measurement values. Leaks represented by two 3.2 mm diameter tubes reduced measured resistance by about 10% (4.2 cmH2O·sec/L for control and 3.9 cm H2O·sec/L for the leak. This was not statistically significant. Larger leaks given by 4.8 and 6.4 mm tubes reduced measurements significantly (3.4 and 3.0 cm cmH2O·sec/L, respectively. Mouth resistance measured with a cardboard mouthpiece gave an APD measurement of 4.2 cm H2O·sec/L and mouth resistance measured with an oronasal mask was 4.5 cm H2O·sec/L; the two were not significantly different. Nose resistance measured with the oronasal mask was 7.6 cm H2O·sec/L. Adding airflow resistances of 1.12 and 2.10 cm H2O·sec/L to the breathing circuit between the mouth and APD yielded respiratory resistance values higher than the control by 0.7 and 2.0 cm H2O·sec/L. Although breathing through a 52 cm length of flexible ventilator tubing reduced the APD

  17. High impulse voltage and current measurement techniques fundamentals, measuring instruments, measuring methods

    CERN Document Server

    Schon, Klaus


    Equipment to be installed in electric power-transmission and distribution systems must pass acceptance tests with standardized high-voltage or high-current test impulses which simulate the stress on the insulation caused by external lightning discharges and switching operations in the grid. High impulse voltages and currents are also used in many other fields of science and engineering for various applications. Therefore, precise impulse-measurement techniques are necessary, either to prevent an over- or understressing of the insulation or to guarantee the effectiveness and quality of the application. The book deals with: principal generator circuits for generating high-voltage and high-current impulses measuring systems and their calibration according to IEC 60060 and IEC 62475 methods of estimating uncertainties of measurement mathematical and experimental basis for characterizing the transfer behavior of spatially extended systems used for measuring fast transients. This book is intended for engineers and ...

  18. Nanometer profile measurement of large aspheric optical surface by scanning deflectometry with rotatable devices (United States)

    Xiao, Muzheng; Jujo, Satomi; Takahashi, Satoru; Takamasu, Kiyoshi


    Large aspheric optical mirrors and lens are wildly used in high-tech industry such as huge telescopes and synchrotron radiation facilities. The measurement uncertainty of the surfaces is needed to be under several tens of nanometers. Current methods such as interferometry method are not available for measuring aspheric surface with departure over hundreds of wavelength. In this paper, we proposed a new method called improved 3D deflectometry method. Rotatable optical devices are applied to enlarge the measuring range of autocollimator with highly accuracy but small measuring range. Data processing methods are also proposed to improve the measurement uncertainty. Experimental setup is designed based on proposed method. Spherical concave mirror with curvature radius of 5000 mm is measured successfully. The repeatability (mean standard deviation) of 10 times measurement is less than 10 nanometers.

  19. Crack Offset Measurement With the Projected Laser Target Device (United States)


    The device and associated analysis methodology summarized in this report were developed for the purpose of estimating the size of discontinuities in the surface of the foam that covers the Space Shuttle External Tank. These surface offsets are thought to be due to subsurface cracks in the foam insulation. The mathematical analysis and procedure described here provide a method to quantity the dimensions of the crack offset in a direction perpendicular to the surface, making use of the projected laser target device (PLTD) tool and a laser line projector. The keys to the construction and use of the PLTD are the following geometrical design requirements: Laser dots are on a square grid: length on a side. Laser beams are perpendicular to projected surface. Beams are parallel out to the distance being projected. The PLTD can be used to (1) calibrate fixed cameras of unknown magnification and orientation (far-field solution); (2) provide equivalent calibration to multiple cameras, previously achieved only by the use of known target points, for example, in 3.D foreign-object debris tracking on a fixed launch platform; (3) compute scaling for conventional 2.D images, and depth of field for 3.D images (near-field solution); and (4) in conjunction with a laser line projector, achieve accurate measurements of surface discontinuity (cracks) in a direction perpendicular to the surface.

  20. Device-independent quantum key distribution based on measurement inputs (United States)

    Rahaman, Ramij; Parker, Matthew G.; Mironowicz, Piotr; Pawłowski, Marcin


    We provide an analysis of a family of device-independent quantum key distribution (QKD) protocols that has the following features. (a) The bits used for the secret key do not come from the results of the measurements on an entangled state but from the choices of settings. (b) Instead of a single security parameter (a violation of some Bell inequality) a set of them is used to estimate the level of trust in the secrecy of the key. The main advantage of these protocols is a smaller vulnerability to imperfect random number generators made possible by feature (a). We prove the security and the robustness of such protocols. We show that using our method it is possible to construct a QKD protocol which retains its security even if the source of randomness used by communicating parties is strongly biased. As a proof of principle, an explicit example of a protocol based on the Hardy's paradox is presented. Moreover, in the noiseless case, the protocol is secure in a natural way against any type of memory attack, and thus allows one to reuse the device in subsequent rounds. We also analyze the robustness of the protocol using semidefinite programming methods. Finally, we present a postprocessing method, and observe a paradoxical property that rejecting some random part of the private data can increase the key rate of the protocol.

  1. Note: Development of 9 A current source for precise resistance measurement method. (United States)

    Štambuk, Igor; Malarić, Roman


    In this Note, design of voltage controlled current source intended to be used in precise resistance measurement system in the range from 0.1 mΩ to 10 Ω is presented. The design specifications of current source include gross-tuning of current in the range from 0.1 mA to 9 A, low noise, low temperature coefficient, and short term stability better than 50 ppm. The realized current source has achieved better short term stability than comparable commercial devices.

  2. Redundant drive current imbalance problem of the Automatic Radiator Inspection Device (ARID) (United States)

    Latino, Carl D.


    The Automatic Radiator Inspection Device (ARID) is a 4 Degree of Freedom (DOF) robot with redundant drive motors at each joint. The device is intended to automate the labor intensive task of space shuttle radiator inspection. For safety and redundancy, each joint is driven by two independent motor systems. Motors driving the same joint, however, draw vastly different currents. The concern was that the robot joints could be subjected to undue stress. It was the objective of this summer's project to determine the cause of this current imbalance. In addition it was to determine, in a quantitative manner, what was the cause, how serious the problem was in terms of damage or undue wear to the robot and find solutions if possible. It was concluded that most problems could be resolved with a better motor control design. This document discusses problems encountered and possible solutions.

  3. Enhanced Ion Current Rectification in 2D Graphene‐Based Nanofluidic Devices


    MIANSARI, Morteza; Friend, James R.; Yeo, Leslie Y.


    Furthering the promise of graphene‐based planar nanofluidic devices as flexible, robust, low cost, and facile large‐scale alternatives to conventional nanochannels for ion transport, we show how the nonlinear current–voltage (I–V) characteristics and ion current rectification in these platforms can be enhanced by increasing the system asymmetry. Asymmetric cuts made to the 2D multilayered graphene oxide film, for example, introduces further asymmetry to that natively inherent in the structura...

  4. Infrared Emissivity Measurements of Building and Civil Engineering Materials: A New Device for Measuring Emissivity (United States)

    Monchau, Jean-Pierre; Marchetti, Mario; Ibos, Laurent; Dumoulin, Jean; Feuillet, Vincent; Candau, Yves


    The knowledge of the infrared emissivity of materials used in buildings and civil engineering structures is useful for two specific approaches. First, quantitative diagnosis of buildings or civil engineering infrastructures by infrared thermography requires emissivity values in the spectral bandwidth of the camera used for measurements, in order to obtain accurate surface temperatures; for instance, emissivity in the band III domain is required when using cameras with uncooled detectors (such as micro-bolometer arrays). Second, setting up accurate thermal balances by numerical modeling requires the total emissivity value for a large wavelength domain; this is, for instance, the case for computing the road surface temperature to predict ice occurrence. Furthermore, periodical surveys of emissivity variations due to aging or soiling of surfaces could be useful in many situations such as thermal mapping of roads or building insulation diagnosis. The use of portable emissivity measurement devices is required for that purpose. A device using an indirect measurement method was previously developed in our lab; the method uses measurement of the reflectivity from a modulated IR source and requires calibration with a highly reflective surface. However, that device uses a low-frequency, thermal modulation well adapted to laboratory measurements but unfit for fast and in situ measurements. Therefore, a new, portable system which retains the principle of an indirect measurement but uses a faster-frequency, mechanical modulation more appropriate to outdoor measurements was developed. Both devices allow measurements in the broad m to m) and narrow m to m) bands. Experiments were performed on a large number of materials commonly used in buildings and civil engineering structures. The final objective of this work is to build a database of emissivity of these materials. A comparison of laboratory and on-site measurements of emissivity values obtained in both spectral bands will be

  5. Device for measuring level of heat-transfer agent in injection wells

    Energy Technology Data Exchange (ETDEWEB)

    Putilov, M.F.; Bar-Sliva, V.I.; Chelenkov, S.V.; Dichenko, M.A.; Nikiforov, Yu.V.; Petrov, A.I.; Turchaninov, Yu.N.; Zevelev, S.Ya.


    A device is claimed for measuring level of heat-transfer agent in wells. It consists of a body, turbine, and a tachometric transformer that switches a magnet located on the turbine shaft, and the core with winding (in the housing), and a secondary transformer. To assure reliability of device, a frequency limiting generator, a comparison scheme, a control unit and source of continuous current have been included. The ends of the tachometric transformer's winding are connected to the secondary transformer and the control unit. The latter is connected to the continuous current source and the output of the comparison scheme; intakes of the comparison scheme are tied to the secondary transformer and the frequency limiting generator.

  6. WE-G-218-02: The Measurement of Absorbed Dose to Active Intravenous Cardiac Devices in Patients Undergoing Radiotherapy. (United States)

    Reft, C


    Radiotherapy departments are seeing an increasing number of patients presenting for treatment with active intravenous cardiac devices (AICDs). This is due to an increasing aging population and technology advances in these devices. The AAPM TG-34 addressed the radiation effects in these devices and provided recommendations for patients with these devices undergoing radiotherapy. The current devices utilizing CMOS technology are more sensitive to radiation then the older bipolar devices. Therefore, it is important to estimate the dose to the device to ensure that the radiation does not adversely affect the performance of the device. This is particularly important for patients dependent on their accurate functioning. The dose to the device is generally from secondary radiation and is typically below 0.05 Gy with most of it coming from lower energy scatter radiation. Treatment planning systems can be used to estimate the dose to the device. However, these systems do not accurately calculate doses at distances more than 2-3 cm from the field edge. For these out-of-field dose measurements the dosimeter requires a high sensitivity and a relatively flat energy response. Thermoluminescent detectors and optically stimulated luminescent detectors satisfy these requirements and they are relatively unobtrusive. The newer formulations of radiochromic film with higher sensitivity can also be used. The detector should be place under 0.5 to 1.0 cm of bolus to minimize the contaminating head-scatter electrons provide a more realistic measurement of the dose to the device. 1. List the reasons for estimating the dose to the AICDs 2. Provide a discussion on the various methods which include calculations and measurements to estimate the dose to the device as well as the uncertainties in these estimates. 3. Identify detectors that satisfy the requirements for these in-vivo out-of-field dose measurements as well as describe the appropriate correction factors to apply for accurate dose

  7. Analysis of Current Source PWM Inverter for Different Levels with No-Insulating Switching Device

    Directory of Open Access Journals (Sweden)

    Kumar Abhishek


    Full Text Available This paper gives the new set-up of inverter having DC current source (CSI having no insulated switching device. In the proposed new CSI topology every switching device are connected across a common-source level, thus a single power supply gate drive circuit is required and no insulated power supply and the customary bootstrap circuit is applied. This CSI topology is even legitimate for utmost level of current waveform output, where the power switches number increases. As a turn up, gate drive complexity is reduced, and it also eliminates the cost of capacitors and transformers in switching devices, driver circuits. In addition, this new topology of current-source PWM inverter (CSI can operate even at utmost switching frequency, as every switches will be connected across a common source level. In this paper the different level of proposed CSI operation principle, its design using computer simulation (MATLAB with its total harmonic distortion (THD is analyzed. The computer simulation using MATLAB determines the feasibility of this topology with the analysis of different level which results in reduction of its complexity and the physical size.

  8. Thermal measurement. Nanoscale temperature mapping in operating microelectronic devices. (United States)

    Mecklenburg, Matthew; Hubbard, William A; White, E R; Dhall, Rohan; Cronin, Stephen B; Aloni, Shaul; Regan, B C


    Modern microelectronic devices have nanoscale features that dissipate power nonuniformly, but fundamental physical limits frustrate efforts to detect the resulting temperature gradients. Contact thermometers disturb the temperature of a small system, while radiation thermometers struggle to beat the diffraction limit. Exploiting the same physics as Fahrenheit's glass-bulb thermometer, we mapped the thermal expansion of Joule-heated, 80-nanometer-thick aluminum wires by precisely measuring changes in density. With a scanning transmission electron microscope and electron energy loss spectroscopy, we quantified the local density via the energy of aluminum's bulk plasmon. Rescaling density to temperature yields maps with a statistical precision of 3 kelvin/hertz(-1/2), an accuracy of 10%, and nanometer-scale resolution. Many common metals and semiconductors have sufficiently sharp plasmon resonances to serve as their own thermometers. Copyright © 2015, American Association for the Advancement of Science.

  9. Numerical Analysis on Current Transport Characteristics in Single Layer Organic Electroluminescent Devices

    Institute of Scientific and Technical Information of China (English)


    A new model to describe I-V characteristics of organic light-emitting devices (OLEDs) is developed based on experimental results. The dependence of I-V characteristics on energy barrier, trap density and carrier mobility is analyzed. The result shows that this model combines the Fowler-Nordheim tunnel theory and the trap charge limited current theory with exponential trap distribution (TCL), and it describes the current transport characteristics of OLEDs more comprehensively. The I-V characteristics follow Fowler-Nordheim theory when the energy barrier is high, the trap density is small and the carrier mobility is large.In other cases they follow the TCL theory.

  10. Development of heating device / development of the high current ion source for neutral beam injection

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Heon Ju; Lee, Dong Gyu; Lee, Kyong Jin; Ko Tae Kyong [Cheju National Univ., Cheju (Korea)


    The design and fabrication of a high current ion source for NBI was carried out. The scale of an ion source was reduced for mock-up test. To develop the high current ion source with the high operational stability and the long lifetime, the parameters including an arc current, gas pressure and extraction voltage should be optimized. If fabricated ion source would be tested, its parameters could be optimized experimentally. Through the optimization of the ion source parameter, the core technology for NBI is established and the experiment of current drive in the fusion device can be performed. This technology also can be applied to the ion beam technology in the field of new material synthesis and semiconductor industry. 24 refs., 22 figs., 13 tabs. (Author)

  11. Resonance measurement of nonlocal spin torque in a three-terminal magnetic device. (United States)

    Xue, Lin; Wang, Chen; Cui, Yong-Tao; Liu, Luqiao; Swander, A; Sun, J Z; Buhrman, R A; Ralph, D C


    A pure spin current generated within a nonlocal spin valve can exert a spin-transfer torque on a nanomagnet. This nonlocal torque enables new design schemes for magnetic memory devices that do not require the application of large voltages across tunnel barriers that can suffer electrical breakdown. Here we report a quantitative measurement of this nonlocal spin torque using spin-torque-driven ferromagnetic resonance. Our measurement agrees well with the prediction of an effective circuit model for spin transport. Based on this model, we suggest strategies for optimizing the strength of nonlocal torque.

  12. Photo-degradation and stabilization effects in operating organic photovoltaic devices by joint photo-current and morphological monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Paci, B.; Generosi, A.; Rossi Albertini, V.; Perfetti, P. [ISM-C.N.R., Area di Ricerca di Tor Vergata, Via del Fosso del Cavaliere 100, 00133 Roma (Italy); de Bettignies, R. [Laboratoire Composants Solaires, CEA INES-RDI, Savoie Technolac, BP 332, 50 avenue du lac Leman, 73377 Le Bourget du Lac (France); Sentein, C. [CEA Saclay, DRT-LITEN-DSEN-GENEC-L2C, F91191 Gif-sur-Yvette (France)


    We report on a joint morphological/photoelectrical study of polymer-based photovoltaic (PV) cells in working conditions. The bulk heterojunction devices investigated are based on an active layer of poly(3-hexyl thiophene) blended with methano-fullerene, combining good PV performances with promising stability. The set-up adopted allowed the electrical properties of the device to be directly correlated to the modification of the electrode morphological parameters (thickness and roughness), which were obtained by in situ energy dispersive X-ray reflectometry (EDXR). The results of this joint time-dependent characterization demonstrated how the observed photo-induced oxidation process, limited to the buried electrode interface, is responsible for a fast decrease in the photo-current. The time-resolved measurements allowed to rule out the dynamics of the morphological changes and showed that the interface morphology may be stabilized by annealing treatments, with a significant improvement of the cell efficiency. (author)

  13. A flux extraction device to measure the magnetic moment of large samples; application to bulk superconductors. (United States)

    Egan, R; Philippe, M; Wera, L; Fagnard, J F; Vanderheyden, B; Dennis, A; Shi, Y; Cardwell, D A; Vanderbemden, P


    We report the design and construction of a flux extraction device to measure the DC magnetic moment of large samples (i.e., several cm(3)) at cryogenic temperature. The signal is constructed by integrating the electromotive force generated by two coils wound in series-opposition that move around the sample. We show that an octupole expansion of the magnetic vector potential can be used conveniently to treat near-field effects for this geometrical configuration. The resulting expansion is tested for the case of a large, permanently magnetized, type-II superconducting sample. The dimensions of the sensing coils are determined in such a way that the measurement is influenced by the dipole magnetic moment of the sample and not by moments of higher order, within user-determined upper bounds. The device, which is able to measure magnetic moments in excess of 1 A m(2) (1000 emu), is validated by (i) a direct calibration experiment using a small coil driven by a known current and (ii) by comparison with the results of numerical calculations obtained previously using a flux measurement technique. The sensitivity of the device is demonstrated by the measurement of flux-creep relaxation of the magnetization in a large bulk superconductor sample at liquid nitrogen temperature (77 K).

  14. Critical current measurement for design of HTS DC power cables (United States)

    Watanabe, Hirofumi


    Critical currents of HTS DC power cables were calculated. In the calculation a relationship between critical current density and magnetic flux density proposed by Gömöry et al. [1] was used and the parameters used in the relationship were obtained by the critical current measurements with respect to the external magnetic field for a sample of the HTS tape. Numerical models of cables were composed and their critical currents were calculated, which showed the strong dependence on the arrangement of the HTS tapes in the cable. Critical current measurements of model cables assembled based on the calculations showed that the measured critical currents also depended on the arrangement of the HTS tapes strongly. The calculated results were compared with the experimental results, which showed that the experimental results agreed well with the calculated results.

  15. A Systematic Review on Existing Measures for the Subjective Assessment of Rehabilitation and Assistive Robot Devices

    Directory of Open Access Journals (Sweden)

    Yiannis Koumpouros


    Full Text Available The objective of the current study is to identify and classify outcome measures currently used for the assessment of rehabilitation or assistive robot devices. We conducted a systematic review of the literature using PubMed, MEDLINE, CIRRIE, and Scopus databases for studies that assessed rehabilitation or assistive robot devices from 1980 through January 2016. In all, 31 articles met all inclusion criteria. Tailor-made questionnaires were the most commonly used tool at 66.7%, while the great majority (93.9% of the studies used nonvalidated instruments. The study reveals the absence of a standard scale which makes it difficult to compare the results from different researchers. There is a great need, therefore, for a valid and reliable instrument to be available for use by the intended end users for the subjective assessment of robot devices. The study concludes by identifying two scales that have been validated in general assistive technology devices and could support the scope of subjective assessment in rehabilitation or assistive robots (however, with limited coverage and a new one called PYTHEIA, recently published. The latter intends to close the gap and help researchers and developers to evaluate, assess, and produce products that satisfy the real needs of the end users.

  16. 16 CFR Figures 1 and 2 to Part 1204 - Suggested Instrumentation for Current Monitoring Device and High Voltage Facility (United States)


    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Suggested Instrumentation for Current Monitoring Device and High Voltage Facility 1 Figures 1 and 2 to Part 1204 Commercial Practices CONSUMER... Instrumentation for Current Monitoring Device and High Voltage Facility EC03OC91.008...

  17. Nanomaterials and synergistic low-intensity direct current (LIDC) stimulation technology for orthopedic implantable medical devices. (United States)

    Shirwaiker, Rohan A; Samberg, Meghan E; Cohen, Paul H; Wysk, Richard A; Monteiro-Riviere, Nancy A


    Nanomaterials play a significant role in biomedical research and applications because of their unique biological, mechanical, and electrical properties. In recent years, they have been utilized to improve the functionality and reliability of a wide range of implantable medical devices ranging from well-established orthopedic residual hardware devices (e.g., hip implants) that can repair defects in skeletal systems to emerging tissue engineering scaffolds that can repair or replace organ functions. This review summarizes the applications and efficacies of these nanomaterials that include synthetic or naturally occurring metals, polymers, ceramics, and composites in orthopedic implants, the largest market segment of implantable medical devices. The importance of synergistic engineering techniques that can augment or enhance the performance of nanomaterial applications in orthopedic implants is also discussed, the focus being on a low-intensity direct electric current (LIDC) stimulation technology to promote the long-term antibacterial efficacy of oligodynamic metal-based surfaces by ionization, while potentially accelerating tissue growth and osseointegration. While many nanomaterials have clearly demonstrated their ability to provide more effective implantable medical surfaces, further decisive investigations are necessary before they can translate into medically safe and commercially viable clinical applications. The article concludes with a discussion about some of the critical impending issues with the application of nanomaterials-based technologies in implantable medical devices, and potential directions to address these.

  18. A study of eddy current measurement (1986-1987)

    Energy Technology Data Exchange (ETDEWEB)

    Ramachandran, R.S.; Armstrong, K.P.


    A study was conducted in 1986 to evaluate a modified eddy current system for measuring copper thickness on Kapton. Results showed a measurement error of 0.42 {mu}in. for a thickness range of 165 to 170 {mu}in. and a measurement variability of 3.2 {mu}in.

  19. [Mobile Health: IEEE Standard for Wearable Cuffless Blood Pressure Measuring Devices]. (United States)

    Zhou, Xia; Wu, Wenli; Bao, Shudi


    IEEE Std 1708-2014 breaks through the traditional standards of cuff based blood pressure measuring devices and establishes a normative definition of wearable cuffless blood pressure measuring devices and the objective performance evaluation of this kind of devices. This study firstly introduces the background of the new standard. Then, the standard details will be described, and the impact of cuffless blood pressure measuring devices with the new standard on manufacturers and end users will be addressed.

  20. Evaluation of spectrum measurement devices for operational use

    CERN Document Server

    Devine, R T; Gray, D W; Seagraves, D T; Olsher, R H; Johnson, J P


    Several neutron spectrometers manufactured by Bubble Technology Industries (BTI) were tested and evaluated in a variety of neutron fields. Findings and conclusions are presented for the following BTI instruments: a modification of the Rotational Spectrometer (ROSPEC) that includes a thermal and epithermal capability, the Simple Scintillation Spectrometer that is used in conjunction with the ROSPEC to extend its high-energy range, and the MICROSPEC N-Probe which is capable of providing a crude spectrum over the energy range from thermal to 18 MeV. The main objective of these measurements was to determine the accuracy of both the energy spectrum and dose equivalent information generated by these devices. In addition, the dose response of the Wide-Energy Neutron Detection Instrument (WENDI-II) was measured in all neutron fields relative to a bare sup 2 sup 5 sup 2 Cf calibration. The performance of the WENDI-II rem meter was compared to the dose information generated by the neutron spectrometers. The instruments...

  1. Device and method for measuring thermal conductivity of thin films (United States)

    Amer, Tahani R. (Inventor); Subramanian, Chelakara (Inventor); Upchurch, Billy T. (Inventor); Alderfer, David W. (Inventor); Sealey, Bradley S. (Inventor); Burkett, Jr., Cecil G. (Inventor)


    A device and method are provided for measuring the thermal conductivity of rigid or flexible, homogeneous or heterogeneous, thin films between 50 .mu.m and 150 .mu.m thick with relative standard deviations of less than five percent. The specimen is sandwiched between like material, highly conductive upper and lower slabs. Each slab is instrumented with six thermocouples embedded within the slab and flush with their corresponding surfaces. A heat source heats the lower slab and a heat sink cools the upper slab. The heat sink also provides sufficient contact pressure onto the specimen. Testing is performed within a vacuum environment (bell-jar) between 10.sup.-3 to 10.sup.-6 Torr. An anti-radiant shield on the interior surface of the bell-jar is used to avoid radiation heat losses. Insulation is placed adjacent to the heat source and adjacent to the heat sink to prevent conduction losses. A temperature controlled water circulator circulates water from a constant temperature bath through the heat sink. Fourier's one-dimensional law of heat conduction is the governing equation. Data, including temperatures, are measured with a multi-channel data acquisition system. On-line computer processing is used for thermal conductivity calculations.

  2. High Dynamic Magnetic Beam Current Measurements by Means of Optimised Magneto-Resistance (MR) Sensor Engineering

    CERN Document Server

    Hape, M; Ricken, W


    The GSI-FAIR project (facility for antiprotons and ion research) will comprehend DC currents up to around 5 A in the SIS 100 synchrotron and after bunch compression down to 50 ns pulse length the peak currents will reach up to 100 A. To meet these higher demands of beam current measurements new sensor techniques are foreseen. The measurement device itself will be designed in form of a clip-on ampere-meter. The air gap of the flux concentrator is assumed to be around 5 mm and thus, the estimated maximum field therein is around 30 mT for a beam current of 100 A peak. The resolution of this device is aimed to be 1 mA in beam current, corresponding to a system dynamic of around 105. This high demands of beam current measurement require more sophisticated sensor types than just using a Hall probe. The characteristics of AMR (anisotropic magneto-resistance), GMR (giant magneto-resistance) and GMI (giant magneto-impedance) sensors like hysteresis, linearity and sensitivity have been measured within the magnetic fiel...

  3. Effect of STI-induced mechanical stress on leakage current in deep submicron CMOS devices

    Institute of Scientific and Technical Information of China (English)


    The shallow trench isolation (STI) induced mechanical stress significantly affects the CMOS device off-state leakage behaviour. In this paper, we designed two types of devices to investigate this effect, and all leakage components,including sub-threshold leakage (Isub), gate-induced-drain-leakage (IGIDL), gate edge-direct-tunnelling leakage (IEDT) and band-to-band-tunnelling leakage (IBTBT) were analysed. For NMOS, Isub can be reduced due to the mechanical stress induced higher boron concentration in well region. However, the GIDL component increases simultaneously as a result of the high well concentration induced drain-to-well depletion layer narrowing as well as the shrinkage of the energy gap. For PMOS, the only mechanical stress effect on leakage current is the energy gap narrowing induced GIDL increase.

  4. Current interruption measurement and analysis for PEM fuel cell

    Energy Technology Data Exchange (ETDEWEB)

    Sun, J.C.; Yuan, X.; Wang, H. [National Research Council of Canada, Vancouver, BC (Canada). Inst. for Fuel Cell Innovation


    The ohmic resistance, charge transfer resistance and the capacity discharge limit of proton exchange membrane (PEM) fuel cells can be evaluated and characterized by a newly developed, low cost, current interruption measuring method. This paper presented the results of a study in which the current interruption measurement for a PEM fuel cell was set up and proven through measurements with a dummy cell. The current interruption characteristics of a 500 W PEM fuel cell stack with an active area of 280 cm{sup 2} was measured using the National Instrument PCI data acquisition unit combined with a TDI electronics load-bank and a FuelCon test station, at different load currents. The ohmic loss of the stack determined by current interruption measurements was in good agreement with that determined by AC impedance spectroscopy. The same setup was shown to be effective for single cell measurements of a small PEM fuel cell and for a PEM fuel cell stack with a load bank. It was concluded that the current interruption measurement is much faster than the AC impedance method, but has lower accuracy, particularly for a signal with high noise. 1 ref., 10 figs.

  5. Measuring Residential Ventilation System Airflows: Part 1 – Laboratory Evaluation of Airflow Meter Devices

    Energy Technology Data Exchange (ETDEWEB)

    Stratton, J. Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Turner, W. J. N. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Wray, Craig P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Walker, Iain S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division


    Building codes increasingly require tighter homes and mechanical ventilation per ASHRAE Standard 62.2. These ventilation flows must be measured so that energy is not wasted with over ventilation and occupants’ health is not compromised by under ventilation. Flow hoods are used to measure these ventilation flows, but there is currently no standard specifying the measurement procedure and measurement devices that should be used. This study evaluates the accuracy of six commercially available flow hoods under laboratory conditions configured to emulate a residential mechanical ventilation duct system. The measurements taken with the flow hoods were compared to simultaneous measurements taken by an in-line reference flow meter having a known uncertainty. Results indicate that powered flow hoods yield more accurate measurements than non-powered flow hoods, and that a majority of the flow hoods measured inlet flows more accurately than outlet flows. In several cases, there was little resemblance between the manufacturers’ stated accuracy and the accuracy we found in our laboratory measurements. It is clear that current flow hood calibration procedures may not consider field application variables such as flow asymmetry, flow angle, and flow direction. A new flow hood measurement standard that takes these ‘real world’ conditions into account should be developed to ensure that residential buildings receive the intended ventilation flows.

  6. Measuring Residential Ventilation System Airflows: Part 1 – Laboratory Evaluation of Airflow Meter Devices

    Energy Technology Data Exchange (ETDEWEB)

    Stratton, J. Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Turner, W. J. N. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Wray, Craig P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Walker, Iain S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division


    Building codes increasingly require tighter homes and mechanical ventilation per ASHRAE Standard 62.2. These ventilation flows must be measured so that energy is not wasted with over ventilation and occupants’ health is not compromised by under ventilation. Flow hoods are used to measure these ventilation flows, but there is currently no standard specifying the measurement procedure and measurement devices that should be used. This study evaluates the accuracy of six commercially available flow hoods under laboratory conditions configured to emulate a residential mechanical ventilation duct system. The measurements taken with the flow hoods were compared to simultaneous measurements taken by an in-line reference flow meter having a known uncertainty. Results indicate that powered flow hoods yield more accurate measurements than non-powered flow hoods, and that a majority of the flow hoods measured inlet flows more accurately than outlet flows. In several cases, there was little resemblance between the manufacturers’ stated accuracy and the accuracy we found in our laboratory measurements. It is clear that current flow hood calibration procedures may not consider field application variables such as flow asymmetry, flow angle, and flow direction. A new flow hood measurement standard that takes these ‘real world’ conditions into account should be developed to ensure that residential buildings receive the intended ventilation flows.

  7. Critical Current Measurements in Commercial Tapes, Coils, and Magnets. (United States)

    Gubser, D. U.; Soulen, R. J., Jr.; Fuller-Mora, W. W.; Francavilla, T. L.


    We have measured a number of tapes, coils, and magnets produced by commercial vendors and determined their properties as functions of magnetic field and temperature. The tapes were measured at the National High Magnetic Field Laboratory in magnetic fields to 20 tesla and at temperatures of 4.2 K, 27 K, 65 K, and 77 K. For the tapes we report critical currents and current-voltage characteristics. Six inch diameter coils were measured at NRL in zero magnetic field. Critical currents, current-voltage characteristics, and reliability studies are reported for the coils. Larger 10 inch diameter coils, which are to be used in a 200 hp superconducting motor, were also measured and results will be presented. The talk will also review the status of the most recent tests of the superconducting motor.

  8. Measurement of Neutrino Induced, Charged Current, Charged Pion Production

    Energy Technology Data Exchange (ETDEWEB)

    Wilking, Michael Joseph [Univ. of Colorado, Boulder, CO (United States)


    Neutrinos are among the least understood particles in the standard model of particle physics. At neutrino energies in the 1 GeV range, neutrino properties are typically determined by observing the outgoing charged lepton produced in a charged current quasi-elastic interactions. The largest charged current background to these measurements comes from charged current pion production interactions, for which there is very little available data.

  9. MPPT Technique Based on Current and Temperature Measurements

    Directory of Open Access Journals (Sweden)

    Eduardo Moreira Vicente


    Full Text Available This paper presents a new maximum power point tracking (MPPT method based on the measurement of temperature and short-circuit current, in a simple and efficient approach. These measurements, which can precisely define the maximum power point (MPP, have not been used together in other existing techniques. The temperature is measured with a low cost sensor and the solar irradiance is estimated through the relationship of the measured short-circuit current and its reference. Fast tracking speed and stable steady-state operation are advantages of this technique, which presents higher performance when compared to other well-known techniques.


    Energy Technology Data Exchange (ETDEWEB)

    Deibele, Craig Edmond [ORNL; Curry, Douglas E [ORNL; Dickson, Richard W [ORNL


    It is desired to measure the linac current of a charged particle beam with a consistent accuracy over a dynamic range of over 120 dB. Conventional current transformers suffer from droop, can be susceptible to electromagnetic interference (EMI), and can be bandwidth limited. A novel detector and electronics were designed to maximize dynamic range of about 120 dB and measure rise-times on the order of 10 nanoseconds.

  11. Bigger, Brighter, Bluer-Better?Current light-emitting devices- adverse sleep properties and preventative strategies.

    Directory of Open Access Journals (Sweden)

    Paul eGringras


    Full Text Available ObjectiveIn an effort to enhance the efficiency, brightness and contrast of light-emitting (LE devices during the day, displays often generate substantial short-wavelength (blue-enriched light emissions that can adversely affect sleep. We set out to verify the extent of such short-wavelength emissions, produced by a tablet (iPad Air, e-reader (Kindle Paperwhite 1st generation and smartphone (iPhone 5s and to determine the impact of strategies designed to reduce these light emissions. SettingUniversity of Surrey dedicated chronobiology facility.MethodsFirstly, the spectral power of all the light-emitting (LE devices was assessed when displaying identical text. Secondly, we compared the text output with that of ‘Angry Birds’-a popular top 100 ‘App Store’ game. Finally we measured the impact of two strategies that attempt to reduce the output of short-wavelength light emissions. The first strategy employed an inexpensive commercially available pair of orange-tinted ‘blue-blocking’ glasses. The second tested an app designed to be ‘sleep-aware’ whose designers deliberately attempted to reduce blue-enriched light emissions.ResultsAll the LE devices shared very similar enhanced blue-light peaks when displaying text. This included the output from the backlit Kindle Paperwhite device. The spectra when comparing text to the Angry Birds game were also very similar, although the

  12. A Fiber-Optic Aircraft Lightning Current Measurement Sensor (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.


    A fiber-optic current sensor based on the Faraday Effect is developed for aircraft installations. It can measure total lightning current amplitudes and waveforms, including continuing current. Additional benefits include being small, lightweight, non-conducting, safe from electromagnetic interference, and free of hysteresis and saturation. The Faraday Effect causes light polarization to rotate in presence of magnetic field in the direction of light propagation. Measuring the total induced light polarization change yields the total current enclosed. The system operates at 1310nm laser wavelength and can measure approximately 300 A - 300 kA, a 60 dB range. A reflective polarimetric scheme is used, where the light polarization change is measured after a round-trip propagation through the fiber. A two-detector setup measures the two orthogonal polarizations for noise subtraction and improved dynamic range. The current response curve is non-linear and requires a simple spline-fit correction. Effects of high current were achieved in laboratory using combinations of multiple fiber and wire loops. Good result comparisons against reference sensors were achieved up to 300 kA. Accurate measurements on a simulated aircraft fuselage and an internal structure illustrate capabilities that maybe difficult with traditional sensors. Also tested at a commercial lightning test facility from 20 kA to 200 kA, accuracy within 3-10% was achieved even with non-optimum setups.

  13. Loss-tolerant measurement-device-independent quantum private queries (United States)

    Zhao, Liang-Yuan; Yin, Zhen-Qiang; Chen, Wei; Qian, Yong-Jun; Zhang, Chun-Mei; Guo, Guang-Can; Han, Zheng-Fu


    Quantum private queries (QPQ) is an important cryptography protocol aiming to protect both the user’s and database’s privacy when the database is queried privately. Recently, a variety of practical QPQ protocols based on quantum key distribution (QKD) have been proposed. However, for QKD-based QPQ the user’s imperfect detectors can be subjected to some detector- side-channel attacks launched by the dishonest owner of the database. Here, we present a simple example that shows how the detector-blinding attack can damage the security of QKD-based QPQ completely. To remove all the known and unknown detector side channels, we propose a solution of measurement-device-independent QPQ (MDI-QPQ) with single- photon sources. The security of the proposed protocol has been analyzed under some typical attacks. Moreover, we prove that its security is completely loss independent. The results show that practical QPQ will remain the same degree of privacy as before even with seriously uncharacterized detectors.

  14. Measurement of active shoulder proprioception: dedicated system and device. (United States)

    Lubiatowski, Przemyslaw; Ogrodowicz, Piotr; Wojtaszek, Marcin; Kaniewski, Ryszard; Stefaniak, Jakub; Dudziński, Witold; Romanowski, Leszek


    Proprioception is an essential part of shoulder stability and neuromuscular control. The purpose of the study was the development of a precise system of shoulder proprioception assessment in the active mode (Propriometr). For that purpose, devices such as the electronic goniometer and computer software had been designed. A pilot study was carried out on a control group of 27 healthy subjects, the average age being 23.8 (22-29) in order to test the system. The result of the assessment was the finding of the error of active reproduction of the joint position (EARJP). EARJP was assessed for flexion, abduction, external and internal rotation. For every motion, reference positions were used at three different angles. The results showed EARJP to range in 3-6.1°. The proprioception evaluation system (propriometr) allows a precise measurement of active joint position sense. The designed system can be used to assess proprioception in both shoulder injuries and treatment. In addition, all achieved results of normal shoulders may serve as reference to be compared with the results of forthcoming studies.

  15. Rapid light transmittance measurements in paper-based microfluidic devices

    Directory of Open Access Journals (Sweden)

    Christina Swanson


    Full Text Available We developed methodology and built a portable reader to assess light transmittance in paper-based microfluidic devices in a highly sensitive, user-friendly and field-appropriate manner. By sandwiching the paper assay between micro-light-emitting diodes and micro-photodetectors, the reader quantifies light transmittance through the paper independent of ambient light conditions. To demonstrate the utility of the reader, we created a single-use paper-based microfluidic assay for measurement of alanine aminotransferase, an indicator of liver health in blood. The paper assay and reader system accurately differentiated alanine aminotransferase levels across the human reference range and demonstrated significant differences at clinically relevant cutoff values. Results were provided within 10 min and were automatically generated without complex image analysis. Performance of this point-of-care diagnostic rivals the accuracy of lab-based spectrometer tests at a fraction of the cost, while matching the timeliness of low-cost portable assays, which have historically shown lower accuracy. This combination of features allows flexible deployment of low cost and quantitative diagnostics to resource-poor settings.

  16. Current Developments in Electrophoretic and Chromatographic Separation Methods on Microfabricated Devices

    DEFF Research Database (Denmark)

    Kutter, Jörg Peter


    a brief overview of current developments in electrophoretic and chromatographic separation methods on microfabricated devices, and highlight some of the trends emerging from recent research results (published or pre-published before November 1999). (C)2000 Published by Elsevier Science B.V, All rights......Microchip-based separation techniques are essential elements in the development of fully integrated micro-total analysis systems, which are envisioned to become powerful instruments for obtaining and assessing analytical data in research, industry, and everyday life. This article's goal is to give...

  17. Transport currents measured in ring samples: test of superconducting weld (United States)

    Zheng, H.; Claus, H.; Chen, L.; Paulikas, A. P.; Veal, B. W.; Olsson, B.; Koshelev, A.; Hull, J.; Crabtree, G. W.


    The critical current densities in bulk melt-textured YBa 2Cu 3O x and across superconducting “weld” joints are measured using scanning Hall probe measurements of the trapped magnetic field in ring samples. With this method, critical current densities are obtained without the use of electrical contacts. Large persistent currents are induced in ring samples at 77 K, after cooling in a 3 kG field. These currents can be determined from the magnetic field they produce. At 77 K a supercurrent exceeding 2000 A (about 10 4 A/cm 2) was induced in a 2 cm diameter ring; this current produces a magnetic field exceeding 1.5 kG in the bore of the ring. We demonstrate that when a ring is cut, and the cut is repaired by a superconducting weld, the weld joint can transmit the same high supercurrent as the bulk.

  18. Fiber-Optic Sensor for Aircraft Lightning Current Measurement (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George G.; Mata, Carlos T.; Mata, Angel G.; Snyder, Gary P.


    An electric current sensor based on Faraday rotation effect in optical fiber was developed for measuring aircraft lightning current. Compared to traditional sensors, the design has many advantages including the ability to measure total current and to conform to structure geometries. The sensor is also small, light weight, non-conducting, safe from interference, and free of hysteresis and saturation. Potential applications include characterization of lightning current waveforms, parameters and paths, and providing environmental data for aircraft certifications. In an optical fiber as the sensing medium, light polarization rotates when exposed to a magnetic field in the direction of light propagation. By forming closed fiber loops around a conductor and applying Ampere s law, measuring the total light rotation yields the enclosed current. A reflective polarimetric scheme is used, where polarization change is measured after the polarized light travels round-trip through the sensing fiber. The sensor system was evaluated measuring rocket-triggered lightning over the 2011 summer. Early results compared very well against a reference current shunt resistor, demonstrating the sensor s accuracy and feasibility in a lightning environment. While later comparisons show gradually increasing amplitude deviations for an undetermined cause, the overall waveforms still compared very well.

  19. Online junction temperature measurement using peak gate current

    DEFF Research Database (Denmark)

    Baker, Nick; Munk-Nielsen, Stig; Iannuzzo, Francesco


    A new method for junction temperature measurement of MOS-gated power semiconductor switches is presented. The measurement method involves detecting the peak voltage over the external gate resistor of an IGBT or MOSFET during turn-on. This voltage is directly proportional to the peak gate current...

  20. Measurement of Local Reactive and Resistive Photoresponse of a Superconducting Microwave Device (United States)

    Anlage, Steven M.; Zhuravel, Alexander P.; Ustinov, Alexey V.


    Despite the voluminous work on the nature of nonlinear effects in high-temperature superconductors (HTS), the causes are not completely clear and remain under debate. The Laser Scanning Microscope (LSM) is a spatially-resolved method that can simultaneously measure optical and high frequency properties of HTS devices. Earlier results showed high resolution images of non-uniform microwave current distributions near the edge of a patterned transmission line structure [A. P. Zhuravel, A. V. Ustinov, K. S. Harshavardhan, and S. M. Anlage, Appl. Phys. Lett. 81, 4979 (2002)]. We have developed a new operational mode in which the microscope separately images the resistive and inductive components of the bolometric photoresponse. The two images show interesting and dramatic differences, leading to new insights about linear and nonlinear properties of HTS microwave devices.

  1. Atmospheric point discharge current measurements using a\\ud temperature-compensated logarithmic current amplifier


    Marlton, Graeme; Harrison, R. Giles; Nicoll, Keri A.


    Measurements of atmospheric corona currents have been made for over 100 years to indicate the atmospheric electric field. Corona currents vary substantially, in polarity and in magnitude. The instrument described here uses a sharp point sensor connected to a temperature compensated bi-polar\\ud logarithmic current amplifier. Calibrations over a range of currents from ±10 fA to ±3 μA and across ±20 ◦C show it has an excellent logarithmic response over six orders of magnitude from 1 pA to 1 μA i...

  2. Note: Atmospheric point discharge current measurements using a temperature-compensated logarithmic current amplifier (United States)

    Marlton, G. J.; Harrison, R. G.; Nicoll, K. A.


    Measurements of atmospheric corona currents have been made for over 100 years to indicate the atmospheric electric field. Corona currents vary substantially, in polarity and in magnitude. The instrument described here uses a sharp point sensor connected to a temperature compensated bi-polar logarithmic current amplifier. Calibrations over a range of currents from ±10 fA to ±3 μA and across ±20 °C show it has an excellent logarithmic response over six orders of magnitude from 1 pA to 1 μA in both polarities for the range of atmospheric temperatures likely to be encountered in the southern UK. Comparison with atmospheric electric field measurements during disturbed weather confirms that bipolar electric fields induce corona currents of corresponding sign, with magnitudes ˜0.5 μA.

  3. Note: atmospheric point discharge current measurements using a temperature-compensated logarithmic current amplifier. (United States)

    Marlton, G J; Harrison, R G; Nicoll, K A


    Measurements of atmospheric corona currents have been made for over 100 years to indicate the atmospheric electric field. Corona currents vary substantially, in polarity and in magnitude. The instrument described here uses a sharp point sensor connected to a temperature compensated bi-polar logarithmic current amplifier. Calibrations over a range of currents from ±10 fA to ±3 μA and across ±20 °C show it has an excellent logarithmic response over six orders of magnitude from 1 pA to 1 μA in both polarities for the range of atmospheric temperatures likely to be encountered in the southern UK. Comparison with atmospheric electric field measurements during disturbed weather confirms that bipolar electric fields induce corona currents of corresponding sign, with magnitudes ~0.5 μA.

  4. Gaussian-modulated coherent-state measurement-device-independent quantum key distribution (United States)

    Ma, Xiang-Chun; Sun, Shi-Hai; Jiang, Mu-Sheng; Gui, Ming; Liang, Lin-Mei


    Measurement-device-independent quantum key distribution (MDI-QKD), leaving the detection procedure to the third partner and thus being immune to all detector side-channel attacks, is very promising for the construction of high-security quantum information networks. We propose a scheme to implement MDI-QKD, but with continuous variables instead of discrete ones, i.e., with the source of Gaussian-modulated coherent states, based on the principle of continuous-variable entanglement swapping. This protocol not only can be implemented with current telecom components but also has high key rates compared to its discrete counterpart; thus it will be highly compatible with quantum networks.

  5. Experimental study on hydrodynamic characteristics of vertical-axis floating tidal current energy power generation device (United States)

    Ma, Yong; Li, Teng-fei; Zhang, Liang; Sheng, Qi-hu; Zhang, Xue-wei; Jiang, Jin


    To study the characteristics of attenuation, hydrostatic towage and wave response of the vertical-axis floating tidal current energy power generation device (VAFTCEPGD), a prototype is designed and experiment is carried out in the towing tank. Free decay is conducted to obtain attenuation characteristics of the VAFTCEPGD, and characteristics of mooring forces and motion response, floating condition, especially the lateral displacement of the VAFTCEPGD are obtained from the towing in still water. Tension response of the #1 mooring line and vibration characteristics of the VAFTCEPGD in regular waves as well as in level 4 irregular wave sea state with the current velocity of 0.6 m/s. The results can be reference for theoretical study and engineering applications related to VAFTCEPGD.

  6. Signal-to-Noise Ratio Measures Efficacy of Biological Computing Devices and Circuits

    Directory of Open Access Journals (Sweden)

    Jacob eBeal


    Full Text Available Engineering biological cells to perform computations has a broad range of important potential applications, including precision medical therapies, biosynthesis process control, and environmental sensing. Implementing predictable and effective computation, however, has been extremely difficult to date, due to a combination of poor composability of available parts and of insufficient characterization of parts and their interactions with the complex environment in which they operate. In this paper, I argue that this situation can be improved by quantitative signal-to-noise analysis of the relationship between computational abstractions and the variation and uncertainty endemic in biological organisms. This analysis takes the form of a ∆SNR function for each computational device, which can be computed from measurements of a device's input/output curve and expression noise. These functions can then be combined to predict how well a circuit will implement an intended computation, as well as evaluating the general suitability of biological devices for engineering computational circuits. Applying signal-to-noise analysis to current repressor libraries shows that no library is currently sufficient for general circuit engineering, but also indicates key targets to remedy this situation and vastly improve the range of computations that can be used effectively in the implementation of biological applications.

  7. Signal-to-Noise Ratio Measures Efficacy of Biological Computing Devices and Circuits. (United States)

    Beal, Jacob


    Engineering biological cells to perform computations has a broad range of important potential applications, including precision medical therapies, biosynthesis process control, and environmental sensing. Implementing predictable and effective computation, however, has been extremely difficult to date, due to a combination of poor composability of available parts and of insufficient characterization of parts and their interactions with the complex environment in which they operate. In this paper, the author argues that this situation can be improved by quantitative signal-to-noise analysis of the relationship between computational abstractions and the variation and uncertainty endemic in biological organisms. This analysis takes the form of a ΔSNRdB function for each computational device, which can be computed from measurements of a device's input/output curve and expression noise. These functions can then be combined to predict how well a circuit will implement an intended computation, as well as evaluating the general suitability of biological devices for engineering computational circuits. Applying signal-to-noise analysis to current repressor libraries shows that no library is currently sufficient for general circuit engineering, but also indicates key targets to remedy this situation and vastly improve the range of computations that can be used effectively in the implementation of biological applications.

  8. Electrosurgical devices: are we closer to finding the ideal appliance? A critical review of current evidence for the use of electrosurgical devices in general surgery. (United States)

    Sran, Harkiran; Sebastian, Joseph; Hossain, Mohammad Ayaz


    Over the last decade, the use of electrosurgical devices has become commonplace across all surgical specialities. The current market is large enough to warrant a comparative review of each device. This has even more impetus given the budgetary constraints of NHS organisations. This review aims to compare the benefits and drawbacks of the most popular electrosurgical devices, whilst conducting a critical review of the literature. Structured searches using databases Medline and EMBASE were conducted. The search was restricted to English language papers only. Due to the abundance of literature, this review will focus on common general surgical procedures alone. Despite a plethora of available devices, individual preference still dictates use. Conventional diathermy may always have its place, but may see a decline in use if costs improve. Newer devices have shown comparable precision and added advantages.

  9. Nitride based quantum well light-emitting devices having improved current injection efficiency (United States)

    Tansu, Nelson; Zhao, Hongping; Liu, Guangyu; Arif, Ronald


    A III-nitride based device provides improved current injection efficiency by reducing thermionic carrier escape at high current density. The device includes a quantum well active layer and a pair of multi-layer barrier layers arranged symmetrically about the active layer. Each multi-layer barrier layer includes an inner layer abutting the active layer; and an outer layer abutting the inner layer. The inner barrier layer has a bandgap greater than that of the outer barrier layer. Both the inner and the outer barrier layer have bandgaps greater than that of the active layer. InGaN may be employed in the active layer, AlInN, AlInGaN or AlGaN may be employed in the inner barrier layer, and GaN may be employed in the outer barrier layer. Preferably, the inner layer is thin relative to the other layers. In one embodiment the inner barrier and active layers are 15 .ANG. and 24 .ANG. thick, respectively.

  10. Study of a fibre optics current sensor for the measurement of plasma current in ITER (United States)

    Wuilpart, Marc; Vanus, Benoit; Andrasan, Alina; Gusarov, Andrei; Moreau, Philippe; Mégret, Patrice


    In this article, we study the feasibility of using a fibre-optics current sensor (FOCS) for the measurement of plasma current in the future fusion reactor ITER. The sensor is based on a classical FOCS interrogator involving the measurement of the state of polarization rotation undergone by the light in presence of a magnetic field (Faraday effect) in an optical fibre surrounding the current and terminated by a Faraday mirror. We considered a uniformly spun optical fibre as the sensing element and we used the Stokes formalism to simulate the sensor. The objective of the simulations is to quantify the ratio LB/SP (beat length over the spun period of the spun fibre) enabling a measurement error in agreement with the ITER specifications. The simulator takes into account the temperature variations undergone by the measurement system under ITER operation. The simulation work showed that a LB/SP ratio of 19.2 is adequate.

  11. The evaluation of rock permeability with streaming current measurements (United States)

    Wang, Jun; Hu, Hengshan; Guan, Wei


    Rock permeability is an important parameter for the formation evaluation. In this paper, a new method with streaming current is proposed to determine the sample permeability based on the electrokinetic effects, and is proved by the experimental measurements. Corresponding to this method, we have designed an experimental setup and a test system, then performed the streaming current (potential) and electro-osmosis pressure experiments with 23 sandstone samples at 0.05 mol l-1 NaCl solution. The streaming current (potential) coefficient and electro-osmosis pressure coefficient are obtained, respectively, with the experimental data at low frequencies with AC lock-in technique. The electrokinetic permeabilities are further calculated with these coefficients. The results are consistent well with the gas permeability measured with Darcy's law, which verifies the current method for estimating rock permeability. Our measurements are also analysed and compared with previous measurements. The results indicate that our method can reflect the essence of electrokinetic effects better and simplify the electrokinetic measurements as well. In addition, we discuss the influences of experimental artefacts (core holder and confining pressure installation) on the electrokinetic data. The results show that the trough phenomenon, appeared in frequency curves of streaming current (potential) coefficients, is induced by the resonance of the core-holder/vibrator system. This is important for the design of electrokinetic setup and the analysis of low-frequency response of the electrokinetic coupling coefficients.

  12. The mismatch between patient life expectancy and the service life of implantable devices in current cardioverter-defibrillator therapy: a call for larger device batteries. (United States)

    Neuzner, Jörg


    In 2005, Bob Hauser published a paper in the Journal of the American College of Cardiology entitled "The growing mismatch between patient longevity and the service life of Implantable Cardioverter-Defibrillators". Now, nearly a decade later, I would like to perform a second look on the problem of a mismatching between ICD device service life and the survival of ICD recipients. Since 2005, the demographics of the ICD population has changed significantly. Primary prevention has become the dominant indication in defibrillator therapy and device implantation is indicated more and more in earlier stages of cardiac diseases. In former larger scale ICD trials, the patient average 5-year survival probability was in a range of 68-71%; in newer CRT-D trials in a range of 72-88%. Due to a progressively widened ICD indication and implantation preferentially performed in patients with better life expectancy, the problem of inadequate device service life is of growing importance. The early days of defibrillator therapy started with a generator volume of 145 ccm and a device service life life were similar challenges for the technicians. Today, we have reached a formerly unexpected extent of device miniaturization. However, technologic improvements were often preferentially translated in further device miniaturization and not in prolonging device service life. In his analysis, Bob Hauser reported a prolonged device service life of 2.3 years in ICD models with a larger battery capacity of 0.54 up to 0.69 Ah. Between 2008 and 2014, several studies had been published on the problem of ICD longevity in clinical scenarios. These analyses included "older" and currently used single chamber, dual chamber and CRT devices. The reported average 5-year device service life ranged from 0 to 75%. Assuming today technology, larger battery capacities will only result in minimal increase in device volume. Selected ICD patients may further benefit from device miniaturization-but the vast majority

  13. Lightning Current Measurement with Fiber-Optic Sensor (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.; Mata, Carlos T.; Mata, Angel G.; Snyder, Gary P.


    A fiber-optic current sensor is successfully developed with many potential applications for electric current measurement. Originally developed for in-flight lightning measurement, the sensor utilizes Faraday Effect in an optical fiber. The Faraday Effect causes linear light polarization in a fiber to rotate when the fiber is exposed to a magnetic field. The polarization change is detected using a reflective polarimetric scheme. Forming fiber loops and applying Ampere's law, measuring the total light rotation results in the determination of the total current enclosed. The sensor is conformable to complex structure geometry. It is also non-conductive and immune to electromagnetic interference, saturation or hysteresis. Installation is non-intrusive, and the sensor can be safely routed through flammable areas. Two similar sensor systems are described in this paper. The first system operates at 1310nm laser wavelength and is capable of measuring approximately 300 A - 300 kA, a 60 dB range. Laboratory validation results of aircraft lighting direct and in-direct effect current amplitudes are reported for this sensor. The second system operates at 1550nm wavelength and can measure about 400 A - 400 kA. Triggered-lightning measurement data are presented for this system. Good results are achieved in all cases.

  14. A Device for Automatically Measuring and Supervising the Critical Care Patient’S Urine Output

    Directory of Open Access Journals (Sweden)

    Roemi Fernández


    Full Text Available Critical care units are equipped with commercial monitoring devices capable of sensing patients’ physiological parameters and supervising the achievement of the established therapeutic goals. This avoids human errors in this task and considerably decreases the workload of the healthcare staff. However, at present there still is a very relevant physiological parameter that is measured and supervised manually by the critical care units’ healthcare staff: urine output. This paper presents a patent-pending device capable of automatically recording and supervising the urine output of a critical care patient. A high precision scale is used to measure the weight of a commercial urine meter. On the scale’s pan there is a support frame made up of Bosch profiles that isolates the scale from force transmission from the patient’s bed, and guarantees that the urine flows properly through the urine meter input tube. The scale’s readings are sent to a PC via Bluetooth where an application supervises the achievement of the therapeutic goals. The device is currently undergoing tests at a research unit associated with the University Hospital of Getafe in Spain.

  15. Effective shielding to measure beam current from an ion source

    Energy Technology Data Exchange (ETDEWEB)

    Bayle, H., E-mail: [Bergoz Instrumentation, Saint-Genis-Pouilly (France); Delferrière, O.; Gobin, R.; Harrault, F.; Marroncle, J.; Senée, F.; Simon, C.; Tuske, O. [CEA, Saclay (France)


    To avoid saturation, beam current transformers must be shielded from solenoid, quad, and RFQ high stray fields. Good understanding of field distribution, shielding materials, and techniques is required. Space availability imposes compact shields along the beam pipe. This paper describes compact effective concatenated magnetic shields for IFMIF-EVEDA LIPAc LEBT and MEBT and for FAIR Proton Linac injector. They protect the ACCT Current Transformers beyond 37 mT radial external fields. Measurements made at Saclay on the SILHI source are presented.

  16. Reliability of Sleep Measures from Four Personal Health Monitoring Devices Compared to Research-Based Actigraphy and Polysomnography

    Directory of Open Access Journals (Sweden)

    Janna Mantua


    Full Text Available Polysomnography (PSG is the “gold standard” for monitoring sleep. Alternatives to PSG are of interest for clinical, research, and personal use. Wrist-worn actigraph devices have been utilized in research settings for measures of sleep for over two decades. Whether sleep measures from commercially available devices are similarly valid is unknown. We sought to determine the validity of five wearable devices: Basis Health Tracker, Misfit Shine, Fitbit Flex, Withings Pulse O2, and a research-based actigraph, Actiwatch Spectrum. We used Wilcoxon Signed Rank tests to assess differences between devices relative to PSG and correlational analysis to assess the strength of the relationship. Data loss was greatest for Fitbit and Misfit. For all devices, we found no difference and strong correlation of total sleep time with PSG. Sleep efficiency differed from PSG for Withings, Misfit, Fitbit, and Basis, while Actiwatch mean values did not differ from that of PSG. Only mean values of sleep efficiency (time asleep/time in bed from Actiwatch correlated with PSG, yet this correlation was weak. Light sleep time differed from PSG (nREM1 + nREM2 for all devices. Measures of Deep sleep time did not differ from PSG (SWS + REM for Basis. These results reveal the current strengths and limitations in sleep estimates produced by personal health monitoring devices and point to a need for future development.

  17. Reliability of Sleep Measures from Four Personal Health Monitoring Devices Compared to Research-Based Actigraphy and Polysomnography (United States)

    Mantua, Janna; Gravel, Nickolas; Spencer, Rebecca M. C.


    Polysomnography (PSG) is the “gold standard” for monitoring sleep. Alternatives to PSG are of interest for clinical, research, and personal use. Wrist-worn actigraph devices have been utilized in research settings for measures of sleep for over two decades. Whether sleep measures from commercially available devices are similarly valid is unknown. We sought to determine the validity of five wearable devices: Basis Health Tracker, Misfit Shine, Fitbit Flex, Withings Pulse O2, and a research-based actigraph, Actiwatch Spectrum. We used Wilcoxon Signed Rank tests to assess differences between devices relative to PSG and correlational analysis to assess the strength of the relationship. Data loss was greatest for Fitbit and Misfit. For all devices, we found no difference and strong correlation of total sleep time with PSG. Sleep efficiency differed from PSG for Withings, Misfit, Fitbit, and Basis, while Actiwatch mean values did not differ from that of PSG. Only mean values of sleep efficiency (time asleep/time in bed) from Actiwatch correlated with PSG, yet this correlation was weak. Light sleep time differed from PSG (nREM1 + nREM2) for all devices. Measures of Deep sleep time did not differ from PSG (SWS + REM) for Basis. These results reveal the current strengths and limitations in sleep estimates produced by personal health monitoring devices and point to a need for future development. PMID:27164110

  18. Reliability of Sleep Measures from Four Personal Health Monitoring Devices Compared to Research-Based Actigraphy and Polysomnography. (United States)

    Mantua, Janna; Gravel, Nickolas; Spencer, Rebecca M C


    Polysomnography (PSG) is the "gold standard" for monitoring sleep. Alternatives to PSG are of interest for clinical, research, and personal use. Wrist-worn actigraph devices have been utilized in research settings for measures of sleep for over two decades. Whether sleep measures from commercially available devices are similarly valid is unknown. We sought to determine the validity of five wearable devices: Basis Health Tracker, Misfit Shine, Fitbit Flex, Withings Pulse O2, and a research-based actigraph, Actiwatch Spectrum. We used Wilcoxon Signed Rank tests to assess differences between devices relative to PSG and correlational analysis to assess the strength of the relationship. Data loss was greatest for Fitbit and Misfit. For all devices, we found no difference and strong correlation of total sleep time with PSG. Sleep efficiency differed from PSG for Withings, Misfit, Fitbit, and Basis, while Actiwatch mean values did not differ from that of PSG. Only mean values of sleep efficiency (time asleep/time in bed) from Actiwatch correlated with PSG, yet this correlation was weak. Light sleep time differed from PSG (nREM1 + nREM2) for all devices. Measures of Deep sleep time did not differ from PSG (SWS + REM) for Basis. These results reveal the current strengths and limitations in sleep estimates produced by personal health monitoring devices and point to a need for future development.

  19. Measurement system for determination of current-voltage characteristics of PV modules (United States)

    Idzkowski, Adam; Walendziuk, Wojciech; Borawski, Mateusz; Sawicki, Aleksander


    The realization of a laboratory stand for testing photovoltaic panels is presented here. The project of the laboratory stand was designed in SolidWorks software. The aim of the project was to control the electrical parameters of a PV panel. For this purpose a meter that measures electrical parameters i.e. voltage, current and power, was realized. The meter was created with the use of LabJack DAQ device and LabVIEW software. The presented results of measurements were obtained in different conditions (variable distance from the source of light, variable tilt angle of the panel). Current voltage characteristics of photovoltaic panel were created and all parameters could be detected in different conditions. The standard uncertainties of sample voltage, current, power measurements were calculated. The paper also gives basic information about power characteristics and efficiency of a solar cell.

  20. Simulation of vibration-induced effect on plasma current measurement using a fiber optic current sensor. (United States)

    Descamps, Frédéric; Aerssens, Matthieu; Gusarov, Andrei; Mégret, Patrice; Massaut, Vincent; Wuilpart, Marc


    An accurate measurement of the plasma current is of paramount importance for controlling the plasma magnetic equilibrium in tokamaks. Fiber optic current sensor (FOCS) technology is expected to be implemented to perform this task in ITER. However, during ITER operation, the vessel and the sensing fiber will be subject to vibrations and thus to time-dependent parasitic birefringence, which may significantly compromise the FOCS performance. In this paper we investigate the effects of vibrations on the plasma current measurement accuracy under ITER-relevant conditions. The simulation results show that in the case of a FOCS reflection scheme including a spun fiber and a Faraday mirror, the error induced by the vibrations is acceptable regarding the ITER current diagnostics requirements.

  1. Measurement of Current Profile in a Tokamak Through AC Modulation

    Institute of Scientific and Technical Information of China (English)


    The plasma current is modulated with an alternating current (ac) component in a frequency range of 90 Hz~900 Hz in the plateau discharge phase in the CT-6B tokamak. A plasma electric conductivity profile in a form of (1 - r2/a2)α with a parameter α, which is fitted with the experimental data, can be determined. The effects of magnetic shear in a tokamak field configuration on the current penetration are taken into account in the numerical simulation. The measurement method and obtained results are discussed.

  2. Current Density Measurements of an Annular-Geometry Ion Engine (United States)

    Shastry, Rohit; Patterson, Michael J.; Herman, Daniel A.; Foster, John E.


    The concept of the annular-geometry ion engine, or AGI-Engine, has been shown to have many potential benefits when scaling electric propulsion technologies to higher power. However, the necessary asymmetric location of the discharge cathode away from thruster centerline could potentially lead to non-uniformities in the discharge not present in conventional geometry ion thrusters. In an effort to characterize the degree of this potential nonuniformity, a number of current density measurements were taken on a breadboard AGI-Engine. Fourteen button probes were used to measure the ion current density of the discharge along a perforated electrode that replaced the ion optics during conditions of simulated beam extraction. Three Faraday probes spaced apart in the vertical direction were also used in a separate test to interrogate the plume of the AGI-Engine during true beam extraction. It was determined that both the discharge and the plume of the AGI-Engine are highly uniform, with variations under most conditions limited to 10% of the average current density in the discharge and 5% of the average current density in the plume. Beam flatness parameter measured 30 mm from the ion optics ranged from 0.85 0.95, and overall uniformity was shown to generally increase with increasing discharge and beam currents. These measurements indicate that the plasma is highly uniform despite the asymmetric location of the discharge cathode.

  3. Determining Confounding Sensitivities In Eddy Current Thin Film Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Gros, Ethan; Udpa, Lalita; Smith, James A.; Wachs, Katelyn


    Determining Confounding Sensitivities In Eddy Current Thin Film Measurements Ethan Gros, Lalita Udpa, Electrical Engineering, Michigan State University, East Lansing MI 48824 James A. Smith, Experiment Analysis, Idaho National Laboratory, Idaho Falls ID 83415 Eddy current (EC) techniques are widely used in industry to measure the thickness of non-conductive films on a metal substrate. This is done using a system whereby a coil carrying a high-frequency alternating current is used to create an alternating magnetic field at the surface of the instrument's probe. When the probe is brought near a conductive surface, the alternating magnetic field will induce ECs in the conductor. The substrate characteristics and the distance of the probe from the substrate (the coating thickness) affect the magnitude of the ECs. The induced currents load the probe coil affecting the terminal impedance of the coil. The measured probe impedance is related to the lift off between coil and conductor as well as conductivity of the test sample. For a known conductivity sample, the probe impedance can be converted into an equivalent film thickness value. The EC measurement can be confounded by a number of measurement parameters. It is the goal of this research to determine which physical properties of the measurement set-up and sample can adversely affect the thickness measurement. The eddy current testing is performed using a commercially available, hand held eddy current probe (ETA3.3H spring loaded eddy probe running at 8 MHz) that comes with a stand to hold the probe. The stand holds the probe and adjusts the probe on the z-axis to help position the probe in the correct area as well as make precise measurements. The signal from the probe is sent to a hand held readout, where the results are recorded directly in terms of liftoff or film thickness. Understanding the effect of certain factors on the measurements of film thickness, will help to evaluate how accurate the ETA3.3H spring

  4. Transient Response of Organo-Metal-Halide Solar Cells Analyzed by Time-Resolved Current-Voltage Measurements

    Directory of Open Access Journals (Sweden)

    M. Greyson Christoforo


    Full Text Available The determination of the power conversion efficiency of solar cells based on organo-metal-halides is subject to an ongoing debate. As solar cell devices may exhibit very slow transient response, current-voltage scans in different directions may not be congruent, which is an effect often referred to as hysteresis. We here discuss time-resolved current-voltage measurements as a means to evaluate appropriate delay times (voltage settling times to be used in current-voltage measurements of solar cells. Furthermore, this method allows the analysis of transient current response to extract time constants that can be used to compare characteristic differences between devices of varying architecture types, selective contacts and changes in devices due to storage or degradation conditions.

  5. Analysis of an optical gate device for measuring aeolian sand movement (United States)

    Etyemezian, V.; Nikolich, G.; Nickling, W.; King, J. S.; Gillies, J. A.


    Movement of sand in response to wind is the most important feature of aeolian sediment transport on Earth and other planets. Through sand blasting during saltation, large amounts of dust are ejected into the atmosphere and transported long distances, impacting climate and human health. Despite continuing improvements, currently available devices for field measurement of sand movement have limitations. An optical gate device (OGD) for detecting the movement, size, and possibly speed of individual sand grains during aeolian sediment transport was analyzed. The approach uses the highly time resolved signal from these sensors, which consist of a light emitter and a photosensitive sensor. A specific OGD that is manufactured by Optek (Carrollton, Texas, USA) was tested in a sediment transport wind tunnel alongside trap-style devices. The OGD device provided particle counts and total signal response that were well correlated with sand trap data (R2 between 0.66 and 0.88). Inter-comparison among eight identical units of the OGD showed excellent repeatability (R2 > 0.98 for 7 of 8 units). Subsequent tests revealed that the response of the phototransistor (light sensor) can be linear when operated within certain workable limits. Practical implications of this are that there is potential for extracting size distribution information. Limits imposed by noise levels in the signal and interferences from extraneous light sources were also identified. Despite the results presented being specific to the OGD model tested, much of the approach outlined is applicable to any OGD-type device (including Wenglor®) if the signal of the photo detector can be accessed directly.

  6. Intercomparison tests of moored current measurements in the upper ocean (United States)

    Halpern, David; Weller, Robert A.; Briscoe, Melbourne G.; Davis, Russ E.; McCullough, James R.


    During the August-September 1977 Mixed Layer Experiment (Mile) and the July-September 1978 Joint Air-Sea Interaction (Jasin) project, moored current measurements were made in the upper ocean with Savonius rotor and vane vector-averaging current meters (VACM), dual orthogonal propeller vector-measuring current meters (VMCM), and dual orthogonal acoustic travel-time vector-averaging current meters (ACM). Wind speeds and significant wave heights reached 20ms-1 and 5 m. The influence of mooring motion upon ACM, VACM, and VMCM measurements are described. In the mixed layer above about 30 m depth where mean currents are relatively large, the effect of a surface-following buoy upon ACM, VACM, and VMCM velocity fluctuations at frequencies less than 0.3 cph was negligible; at frequencies above 4 cph, the VACM data contained the largest amount of mooring induced contamination. Below the mixed layer at depths greater than about 75 m, a subsurface mooring should be used; however, when a surface-following buoy was used, then VMCM data better approximated the spectrum of the fluctuations than VACM data. A spar-buoy should not be used to measure currents at depths as deep as 80 m. The frequency-dependent differences between VACM and VMCM and between VACM and ACM measurements are described. At frequencies less than 0.3 cph, the differences between the VACM and ACM or the VMCM records were not significant with 95% confidence limits, were always positive, and above 80 m depth were less than 20%. At frequencies above 4 cph, the VACM-VMCM differences were about 5 times larger than the VACM-ACM differences.

  7. A simple indentation device for measuring micrometer-scale tissue stiffness

    Energy Technology Data Exchange (ETDEWEB)

    Levental, I; Levental, K R; Janmey, P A [Institute for Medicine and Engineering, University of Pennsylvania, Philadelphia, PA 19104 (United States); Klein, E A; Assoian, R [Department of Pharmacology, University of Pennsylvania, Philadelphia, PA 19104 (United States); Miller, R T [Departments of Medicine and Physiology, Louis Stokes VAMC, Cleveland, OH (United States); Wells, R G, E-mail: [Department of Medicine, University of Pennsylvania, Philadelphia, PA 19104 (United States)


    Mechanical properties of cells and extracellular matrices are critical determinants of function in contexts including oncogenic transformation, neuronal synapse formation, hepatic fibrosis and stem cell differentiation. The size and heterogeneity of biological specimens and the importance of measuring their mechanical properties under conditions that resemble their environments in vivo present a challenge for quantitative measurement. Centimeter-scale tissue samples can be measured by commercial instruments, whereas properties at the subcellular (nm) scale are accessible by atomic force microscopy, optical trapping, or magnetic bead microrheometry; however many tissues are heterogeneous on a length scale between micrometers and millimeters which is not accessible to most current instrumentation. The device described here combines two commercially available technologies, a micronewton resolution force probe and a micromanipulator for probing soft biological samples at sub-millimeter spatial resolution. Several applications of the device are described. These include the first measurement of the stiffness of an intact, isolated mouse glomerulus, quantification of the inner wall stiffness of healthy and diseased mouse aortas, and evaluation of the lateral heterogeneity in the stiffness of mouse mammary glands and rat livers with correlation of this heterogeneity with malignant or fibrotic pathology as evaluated by histology.

  8. A Fiber-Optic Current Sensor for Lightning Measurement Applications (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.


    An optical-fiber sensor based on Faraday Effect is developed for measuring total lightning electric current. It has many unique capabilities not possible with traditional current sensors. Designed for aircraft installation, the sensor is lightweight, non-conducting, structure-conforming, and is immune to electromagnetic interference, hysteresis and saturation. It can also be used on windmills, lightning towers, and can help validate lightning detection network measurements. Faraday Effect causes light polarization to rotate when the fiber is exposed to a magnetic field in the direction of light propagation. Thus, the magnetic field strength can be determined from the light polarization change. By forming closed fiber loops and applying Ampere's law, measuring the total light rotation yields the total current enclosed. The broadband, dual-detector, reflective polarimetric scheme allows measurement of both DC component and AC waveforms with about 60 dB dynamic range. Three sensor systems were built with different sensitivities from different laser wavelengths. Operating at 850nm, the first system uses twisted single-mode fiber and has a 150 A - 150 KA range. The second system operates at 1550nm, uses spun polarization maintaining fiber, and can measure 400 A - 400 KA. Both systems were validated with rocket-triggered lightning measurements and achieved excellent results when compared to a resistive shunt. The third system operates at 1310nm, uses spun polarization maintaining fiber, and can measure approximately 300 A - 300 KA. High current measurements up to 200 KA were demonstrated at a commercial lightning test facility. The system was recently installed on an aircraft and flown near icing weather conditions.

  9. Experimental measurement, calculation and thermal visualization condenser temperature of cooling device with a heat pipe technology

    Directory of Open Access Journals (Sweden)

    Nemec Patrik


    Full Text Available This work deal with evaluation of condenser temperature by experimental measurement, calculation and thermal visualization of cooling device working with a heat pipe technology. The referred device in the article is cooling device capable transfer high heat fluxes from electric elements to the surrounding. One from many things influenced the heat flux amount transferred from electronic elements through the cooling device to the surrounding is condenser construction, its capacity and option of heat removal. The work contain description, working principle and construction of cooling device. Experimental part describe the measuring method and mathematical calculation to condenser temperature evaluation of cooling device depending on the loaded heat of electronic components in range from 250 to 750 W. The mathematical calculation is based on physical phenomena of boiling, condensation and natural convection heat transfer. The results of experimental measurement and mathematical calculation are verified by thermal imagining of device condenser by IR camera.

  10. Current Tunnelling in MOS Devices with Al2O3/SiO2 Gate Dielectric

    Directory of Open Access Journals (Sweden)

    A. Bouazra


    Full Text Available With the continued scaling of the SiO2 thickness below 2 nm in CMOS devices, a large direct-tunnelling current flow between the gate electrode and silicon substrate is greatly impacting device performance. Therefore, higher dielectric constant materials are desirable for reducing the gate leakage while maintaining transistor performance for very thin dielectric layers. Despite its not very high dielectric constant (∼10, Al2O3 has emerged as one of the most promising high-k candidates in terms of its chemical and thermal stability as its high-barrier offset. In this paper, a theoretical study of the physical and electrical properties of Al2O3 gate dielectric is reported including I(V and C(V characteristics. By using a stack of Al2O3/SiO2 with an appropriate equivalent oxide thickness of gate dielectric MOS, the gate leakage exhibits an important decrease. The effect of carrier trap parameters (depth and width at the Al2O3/SiO2 interface is also discussed.

  11. Overcoming the current issues surrounding device leads: reducing the complications during extraction. (United States)

    Bongiorni, Maria Grazia; Segreti, Luca; Di Cori, Andrea; Zucchelli, Giulio; Paperini, Luca; Viani, Stefano; Soldati, Ezio


    The implantation rate of cardiac implantable electronic devices has consistently increased in the last 20 years, as have the related complication rates. The most relevant issue is the removal of pacing and implantable cardioverter defibrillator (ICD) leads, which a few months after implantation tend to develop intravascular fibrosis, often making extraction a challenging and risky procedure. Areas covered: The transvenous lead extraction (TLE) scenario is constantly evolving. TLE is a key procedure in lead management strategies. Many efforts have been made to develop new TLE approaches and techniques allowing a safe and effective procedure for patients. The increasing rate of cardiac implantable electronic device (CIED) implantations and of CIED related complications highlight the importance of TLE. Lead related- and patient-related factors may change the future of extractions. We review the current status of TLE, focusing on the strategies available to perform the optimal procedure in the right patient and reducing procedure related complications. Expert commentary: Understanding the importance of an accurate TLE risk stratification is mandatory to optimize the procedural risk-to-benefits ratio. The use of adequate tools, techniques and approaches, and appropriate training are cornerstones for the achievement of safer procedures.

  12. Tolerability of intramuscular and intradermal delivery by CELLECTRA® adaptive constant current electroporation device in healthy volunteers (United States)

    Diehl, Malissa C; Lee, Jessica C; Daniels, Stephen E; Tebas, Pablo; Khan, Amir S; Giffear, Mary; Sardesai, Niranjan Y; Bagarazzi, Mark L


    DNA vaccines are being developed as a potentially safe and effective immunization platform. However, translation of DNA vaccines into a clinical setting has produced results that have fallen short of those generated in a preclinical setting. Various strategies are being developed to address this lack of potency, including improvements in delivery methods. Electroporation (EP) creates transient increases in cell membrane permeability, thus enhancing DNA uptake and leading to a more robust immune response. Here, we report on the safety and tolerability of delivering sterile saline via intramuscular (IM) or intradermal (ID) injection followed by in vivo electroporation using the CELLECTRA® adaptive constant current device in healthy adults from two open-label studies. Pain, as assessed by VAS, was highest immediately after EP but diminishes by about 50% within 5 min. Mean VAS scores appear to correlate with the amount of energy delivered and depth of needle insertion, especially for intramuscular EP. Mean scores did not exceed 7 out of 10 or 3 out of 10 for IM and ID EP, respectively. The majority of adverse events included mild to moderate injection site reactions that resolved within one day. No deaths or serious adverse events were reported during the course of either study. Overall, injection followed by EP with the CELLECTRA® device was well-tolerated and no significant safety concerns were identified. These studies support the further development of electroporation as a vaccine delivery method to enhance immunogenicity, particularly for diseases in which traditional vaccination approaches are ineffective. PMID:24051434


    Directory of Open Access Journals (Sweden)

    A. M. Beznarytnyy


    Full Text Available Purpose. Development of formalized description of automatic block system of numerical code based on the analysis of characteristic failures of automatic block system and procedure of its maintenance. Methodology. For this research a theoretical and analytical methods have been used. Findings. Typical failures of the automatic block systems were analyzed, as well as basic reasons of failure occur were found out. It was determined that majority of failures occurs due to defects of the maintenance system. Advantages and disadvantages of the current service technology of automatic block system were analyzed. Works that can be automatized by means of technical diagnostics were found out. Formal description of the numerical code of automatic block system as a graph in the state space of the system was carried out. Originality. The state graph of the numerical code of automatic block system that takes into account gradual transition from the serviceable condition to the loss of efficiency was offered. That allows selecting diagnostic information according to attributes and increasing the effectiveness of recovery operations in the case of a malfunction. Practical value. The obtained results of analysis and proposed the state graph can be used as the basis for the development of new means of diagnosing devices for automatic block system, which in turn will improve the efficiency and service of automatic block system devices in general.

  14. Leakage current behaviors of Al/ZrO2/Al and Al/YSZ/Al devices (United States)

    Yeh, Tsung-Her; Lin, Ruei-De; Cherng, Bo-Ruei; Cherng, Jyh-Shiarn


    The leakage current behaviors of Al/ZrO2/Al and Al/yttria stabilized zirconia (YSZ)/Al devices are investigated for resistive random access memory (RRAM) applications. A silicon oxide layer (450 nm) is first formed on a Si wafer by thermal oxidation. Onto it an Al bottom electrode (270 nm), a ZrO2 or YSZ nano-film (75 nm), and an Al top electrode (270 nm) are sequentially deposited by sputtering. These RRAM devices exhibit ohmic behaviors in the low-field region, while Schottky and Poole-Frenkel emissions take over in the high-field regions. Both the Schottky and trap barrier levels are decreased when monoclinic ZrO2 is replaced by cubic YSZ in the metal/oxide/metal structure. This is attributed not only to the higher symmetry crystal structure and lower binding energy of YSZ, but also to the formation of more oxygen vacancies and their re-distribution associated with yttria doping.

  15. Interlaboratory Comparisons of NbTi Critical Current Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Godeke, A.; Turrioni, D.; Boutboul, T.; Cheggour, N.; Goodrich, L.F.; Ghosh, A.; Den Ouden, A.; Meinesz, M.


    We report on a multi-institute comparison of critical current data measured on a modern NbTi wire for the Large Hadron Collider (LHC), which has shown a standard deviation below 1% in critical current density spread in more than 1500 measurements. Interlaboratory comparisons on Nb{sub 3}Sn wires have shown ambiguities that could be attributable to strain related differences in critical current density, originating from differences in sample handling, reaction, and mounting techniques, or also to differences in the magnetic field and current calibrations between the institutes. A round robin test of a well characterized NbTi wire provides a baseline variance in critical current results that is presumed to be attributable only to differences in the characterization systems. Systematic differences on the order of 3.5% are found in the comparison. The most likely cause for the observed differences is a small diameter holder that brings the wire into a strain regime in which strain effects can no longer be ignored. A NbTi round robin test, when performed properly, will separate system differences from sample specific differences and provide laboratories with an opportunity to calibrate equipment against a standard measurement.

  16. Surface Current Measurements In Terra Nova Bay By Hf Radar (United States)

    Flocco, D.; Falco, P.; Wadhams, P.; Spezie, G.

    We present the preliminary results of a field experiment carried out within frame- work of the CLIMA project of the Italian National Programme for Antarctic Research (PNRA) and in cooperation with the Scott Polar Research Institute of Cambridge. Dur- ing the second period (02/12/1999-23/01/2000) of the XV Italian expedition a coastal radar was used to characterize the current field in the area of Terra Nova Bay (TNB). One of the aims of the CLIMA (Climatic Long-term Interactions for the Mass balance in Antarctica) project is to determine the role of the polynya in the sea ice mass bal- ance, water structure and local climate. The OSCR-II experiment was planned in order to provide surface current measurements in the area of TNB polynya, one of the most important coastal polynya of the Ross Sea. OSCR (Ocean Surface Current Radar) is a shore based, remote sensing system designed to measure sea surface currents in coastal waters. Two radar sites (a master and a slave) provide with radial current mea- surements; data combined from both sites yield the total current vector. Unfortunately the master and slave stations did not work together throughout the whole period of the experiment. A description of the experiment and a discussion of the results, will be proposed.

  17. The Hyaluronic Acid Fillers: Current Understanding of the Tissue Device Interface. (United States)

    Greene, Jacqueline J; Sidle, Douglas M


    The article is a detailed update regarding cosmetic injectable fillers, specifically focusing on hyaluronic acid fillers. Hyaluronic acid-injectable fillers are used extensively for soft tissue volumizing and contouring. Many different hyaluronic acid-injectable fillers are available on the market and differ in terms of hyaluronic acid concentration, particle size, cross-linking density, requisite needle size, duration, stiffness, hydration, presence of lidocaine, type of cross-linking technology, and cost. Hyaluronic acid is a natural component of many soft tissues, is identical across species minimizing immunogenicity has been linked to wound healing and skin regeneration, and is currently actively being studied for tissue engineering purposes. The biomechanical and biochemical effects of HA on the local microenvironment of the injected site are key to its success as a soft tissue filler. Knowledge of the tissue-device interface will help guide the facial practitioner and lead to optimal outcomes for patients.

  18. Tethered acoustic doppler current profiler platforms for measuring streamflow (United States)

    Rehmel, Michael S.; Stewart, James A.; Morlock, Scott E.


    The U.S. Geological Survey tested and refined tethered-platform designs for measuring streamflow. Platform specifications were developed, radio-modem telemetry of acoustic Doppler current profiler (ADCP) data and potential platform-hull sources were investigated, and hulls were tested and evaluated.

  19. Fiber-Optic Current Sensor Validation with Triggered Lightning Measurements (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.; Mata, Carlos T.; Mata, Angel G.; Snyder, Gary P.


    A fiber optic current sensor based on the Faraday Effect is developed that is highly suitable for aircraft installation and can measure total current enclosed in a fiber loop down to DC. Other attributes include being small, light-weight, non-conducting, safe from electromagnetic interference, and free of hysteresis and saturation. The Faraday Effect causes light polarization to rotate when exposed to a magnetic field in the direction of light propagation. Measuring the induced light polarization rotation in fiber loops yields the total current enclosed. Two sensor systems were constructed and installed at Camp Blanding, Florida, measuring rocket-triggered lightning. The systems were similar in design but with different laser wavelengths, sensitivities and ranges. Results are compared to a shunt resistor as reference. The 850nm wavelength system tested in summer 2011 showed good result comparison early. However, later results showed gradual amplitude increase with time, attributed to corroded connections affecting the 50-ohm output termination. The 1550nm system also yielded good results in the summer 2012. The successful measurements demonstrate the fiber optic sensor's accuracies in capturing real lightning currents, and represent an important step toward future aircraft installation.

  20. Beam Current Measurement and Adjustment System on AMS

    Institute of Scientific and Technical Information of China (English)

    WUShao-yong; HEMING; SUSheng-yong; WANGZhen-jun; JIANGShan


    The beam current measurement and adjustment system of HI-13 tandem accelerator mass spectrometry detector system is consisted of the faraday cup, fluorescent target and a series of adjustable vertical slits(Fig. 1). The system's operation is very complicated and the transmission is low for the old system. A new system is instalated for improvement. We put the adjustable vertical slit, Faraday cup.

  1. Analysis of operations and cyber security policies for a system of cooperating Flexible Alternating Current Transmission System (FACTS) devices.

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, Laurence R.; Tejani, Bankim; Margulies, Jonathan; Hills, Jason L.; Richardson, Bryan T.; Baca, Micheal J.; Weiland, Laura


    Flexible Alternating Current Transmission Systems (FACTS) devices are installed on electric power transmission lines to stabilize and regulate power flow. Power lines protected by FACTS devices can increase power flow and better respond to contingencies. The University of Missouri Rolla (UMR) is currently working on a multi-year project to examine the potential use of multiple FACTS devices distributed over a large power system region in a cooperative arrangement in which the FACTS devices work together to optimize and stabilize the regional power system. The report describes operational and security challenges that need to be addressed to employ FACTS devices in this way and recommends references, processes, technologies, and policies to address these challenges.

  2. SQUID Based Cryogenic Current Comparator for Measurements of the Dark Current of Superconducting Cavities

    CERN Document Server

    Vodel, W; Neubert, R; Nietzsche, S


    This contribution presents a LTS-SQUID based Cryogenic Current Comparator (CCC) for detecting dark currents, generated e.g. by superconducting cavities for the upcoming X-FEL project at DESY. To achieve the maximum possible energy the gradients of the superconducting RF cavities should be pushed close to the physical limit of 50 MV/m. The measurement of the undesired field emission of electrons (the so-called dark current) in correlation with the gradient will give a proper value to compare and classify the cavities. The main component of the CCC is a high performance LTS-DC SQUID system which is able to measure extremely low magnetic fields, e.g. caused by the extracted dark current. For this reason the input coil of the SQUID is connected across a special designed toroidal niobium pick-up coil (inner diameter: about 100 mm) for the passing electron beam. A noise limited current resolution of nearly 2 pA/√(Hz) with a measurement bandwidth of up to 70 kHz was achieved without the pick-up coil. Now, ...

  3. Evaluation of Leakage Current Measurement for Site Pollution Severity Assessment

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Shercat MASOUM


    Full Text Available Flashover of insulators in transmission and distribution systems may cause costly outages for power companies and their customers. Industrial and/or coastal pollution of external insulation is a major cause for such events at the normal power frequency voltage of the systems. The power companies are now facing increasing competition resulting in pressure to lower the cost and to increase the system reliability. Different methods have been applied in the past to overcome or reduce the problems with flashover on insulators. Methods which should provide reliable data under real physical conditions. In this paper several measuring methods to evaluate the pollution levels on outdoor insulators are described. According to this comparison, Leakage Current Measurement ‘LCM’ method is a reliable method for measurement leakage current in outdoor insulators and surge arresters.

  4. Frequency spectra from current vs. magnetic flux density measurements for mobile phones and other electrical appliances. (United States)

    Straume, Aksel; Johnsson, Anders; Oftedal, Gunnhild; Wilén, Jonna


    The frequency spectra of electromagnetic fields have to be determined to evaluate human exposure in accordance to ICNIRP guidelines. In the literature, comparisons with magnetic field guidelines have been performed by using the frequency distribution of the current drawn from the battery. In the present study we compared the frequency spectrum in the range 217 Hz to 2.4 kHz of the magnetic flux density measured near the surface of a mobile phone with the frequency spectrum of the supply current. By using the multiple frequency rule, recommended in the ICNIRP guidelines, we estimated the magnetic field exposure in the two cases. Similar measurements and estimations were done for an electric drill, a hair dryer, and a fluorescent desk lamp. All the devices have a basic frequency of 50 Hz, and the frequency spectra were evaluated up to 550 Hz. We also mapped the magnetic field in 3D around three mobile phones. The frequency distributions obtained from the two measurement methods are not equal. The frequency content of the current leads to an overestimation of the magnetic field exposure by a factor up to 2.2 for the mobile phone. For the drill, the hair dryer, and the fluorescent lamp, the supply current signal underestimated the exposure by a factor up to 2.3. In conclusion, an accurate exposure evaluation requires the magnetic flux density spectrum of the device to be measured directly. There was no indication that the devices studied would exceed the reference levels at the working distances normally used.

  5. Current state of micro-robots/devices as substitutes for screening colonoscopy: assessment based on technology readiness levels. (United States)

    Tapia-Siles, Silvia C; Coleman, Stuart; Cuschieri, Alfred


    Previous reports have described several candidates, which have the potential to replace colonoscopy, but to date, there is still no device capable of fully replacing flexible colonoscopy in the management of colonic disorders and for mass adult population screening for asymptomatic colorectal cancer. NASA developed the TRL methodology to describe and define the stages of development before use and marketing of any device. The definitions of the TRLS used in the present review are those formulated by "The US Department of Defense Technology Readiness Assessment Guidance" but adapted to micro-robots for colonoscopy. All the devices included are reported in scientific literature. They were identified by a systematic search in Web of Science, PubMed and IEEE Xplore amongst other sources. Devices that clearly lack the potential for full replacement of flexible colonoscopy were excluded. The technological salient features of all the devices included for assessment are described briefly, with particular focus on device propulsion. The devices are classified according to the TRL criteria based on the reported information. An analysis is next undertaken of the characteristics and salient features of the devices included in the review: wireless/tethered devices, data storage-transmission and navigation, additional functionality, residual technology challenges and clinical and socio-economical needs. Few devices currently possess the required functionality and performance to replace the conventional colonoscopy. The requirements, including functionalities which favour the development of a micro-robot platform to replace colonoscopy, are highlighted.

  6. Determining confounding sensitivities in eddy current thin film measurements (United States)

    Gros, Ethan; Udpa, Lalita; Smith, James A.; Wachs, Katelyn


    Eddy current (EC) techniques are widely used in industry to measure the thickness of non-conductive films on a metal substrate. This is done by using a system whereby a coil carrying a high-frequency alternating current is used to create an alternating magnetic field at the surface of the instrument's probe. When the probe is brought near a conductive surface, the alternating magnetic field will induce ECs in the conductor. The substrate characteristics and the distance of the probe from the substrate (the coating thickness) affect the magnitude of the ECs. The induced currents load the probe coil affecting the terminal impedance of the coil. The measured probe impedance is related to the lift off between coil and conductor as well as conductivity of the test sample. For a known conductivity sample, the probe impedance can be converted into an equivalent film thickness value. The EC measurement can be confounded by a number of measurement parameters. It was the goal of this research to determine which physical properties of the measurement set-up and sample can adversely affect the thickness measurement. The eddy-current testing was performed using a commercially available, hand-held eddy-current probe (ETA3.3H spring-loaded eddy probe running at 8 MHz) that comes with a stand to hold the probe. The stand holds the probe and adjusts the probe on the z-axis to help position the probe in the correct area as well as make precise measurements. The signal from the probe was sent to a hand-held readout, where the results are recorded directly in terms of liftoff or film thickness. Understanding the effect of certain factors on the measurements of film thickness, will help to evaluate how accurate the ETA3.3H spring-loaded eddy probe was at measuring film thickness under varying experimental conditions. This research studied the effects of a number of factors such as i) conductivity, ii) edge effect, iii) surface finish of base material and iv) cable condition.

  7. Direct measurement on the geometric phase of a double quantum dot qubit via quantum point contact device (United States)

    Liu, Bao; Zhang, Feng-Yang; Song, Jie; Song, He-Shan


    We propose a direct measurement scheme to read out the geometric phase of a coupled double quantum dot system via a quantum point contact(QPC) device. An effective expression of the geometric phase has been derived, which relates the geometric phase of the double quantum dot qubit to the current through QPC device. All the parameters in our expression are measurable or tunable in experiment. Moreover, since the measurement process affects the state of the qubit slightly, the geometric phase can be protected. The feasibility of the scheme has been analyzed. Further, as an example, we simulate the geometrical phase of a qubit when the QPC device is replaced by a single electron transistor(SET). PMID:26121538

  8. An easy way to measure accurately the direct magnetoelectric voltage coefficient of thin film devices (United States)

    Poullain, Gilles; More-Chevalier, Joris; Cibert, Christophe; Bouregba, Rachid


    TbxDy1-xFe2/Pt/Pb(Zrx, Ti1-x)O3 thin films were grown on Pt/TiO2/SiO2/Si substrate by multi-target sputtering. The magnetoelectric voltage coefficient αΗΜΕ was determined at room temperature using a lock-in amplifier. By adding, in series in the circuit, a capacitor of the same value as that of the device under test, we were able to demonstrate that the magnetoelectric device behaves as a voltage source. Furthermore, a simple way to subtract the stray voltage arising from the flow of eddy currents in the measurement set-up, is proposed. This allows the easy and accurate determination of the true magnetoelectric voltage coefficient. A large αΗΜΕ of 8.3 V/cm. Oe was thus obtained for a Terfenol-D/Pt/PZT thin film device, without DC magnetic field nor mechanical resonance.

  9. Normalized velocity profiles of field-measured turbidity currents (United States)

    Xu, Jingping


    Multiple turbidity currents were recorded in two submarine canyons with maximum speed as high as 280 cm/s. For each individual turbidity current measured at a fixed station, its depth-averaged velocity typically decreased over time while its thickness increased. Some turbidity currents gained in speed as they traveled downcanyon, suggesting a possible self-accelerating process. The measured velocity profiles, first in this high resolution, allowed normalizations with various schemes. Empirical functions, obtained from laboratory experiments whose spatial and time scales are two to three orders of magnitude smaller, were found to represent the field data fairly well. The best similarity collapse of the velocity profiles was achieved when the streamwise velocity and the elevation were normalized respectively by the depth-averaged velocity and the turbidity current thickness. This normalization scheme can be generalized to an empirical function Y = exp(–αXβ) for the jet region above the velocity maximum. Confirming theoretical arguments and laboratory results of other studies, the field turbidity currents are Froude-supercritical.

  10. Design and dynamic analysis of single-axis integrated inertia measurement device

    Institute of Scientific and Technical Information of China (English)


    The structure and measurement theory of a single-axis integrated inertia measurement device are discussed in this paper.The acceleration and angle velocity can be detected by the proposed sensor at the same time.The kinetic model of the device is also established.In addition,the signal generation of the single-axis integrated inertiameasurement device is analyzed and simulated.The results of the model are consistent with simulation result.

  11. Design, Assembly, and Commissioning of a Cryogenic DC Current Transformer Designed for Measuring Currents of up to 80 kA

    CERN Document Server

    Montenero, G; Bottura, L; Arpaia, P


    A new cryogenic dc current transformer (Cryo-DCCT) has recently been designed and assembled at CERN. The device, whose design is based on that of a high-accuracy 600 A market solution suitable for room temperature applications, is optimized for measuring currents of up to 80 kA and for operation at 4.2 K. The CryoDCCT has been conceived with the objective of preserving the metrological performance of the original commercial device in the new extended range of operation. For reducing the effect of interfering magnetic fields arising from test conditions, it incorporates ferromagnetic and MgB2 superconducting shields. In this paper, the design of the CryoDCCT and the results of the commissioning of the device at CERN are reported. The effectiveness of the current transducer is analysed and discussed. This new device will be used for measuring the secondary current of a 80 kA superconducting transformer feeding a sample of NbSn3 cable at the Facility for Research on Superconducting Cables (FRESCA) at CERN.

  12. An analog device to facilitate occlusion pressure measurements. (United States)

    Delavault, E; Saumon, G


    The "oclusion pressure" technique is widely used to test the response of respiratory centers to CO2. The graphic treatment of the test necessitates a fast recording of the mouth pressure signal, thus using a great deal of paper and requiring a tedious interpretation. The device described here controls an electromagnetic valve closing it during expiration and opening it after a given time delay, following the onset of inspiration. During that time only, the mouth pressure signal goes through an analog switch, the highest signal value is then equal to the occlusion pressure. This device allows the use of a slow recorder without loss of information. In addition, it has the advantage of generating very short respiratory occlusions, thus sparing the subject being tested from interferences in subsequent respiratory cycles. It can be used as a pretreatment unit to be associated with a microprocessor.

  13. An Optical Fiber Sensor and Its Application in UAVs for Current Measurements

    Directory of Open Access Journals (Sweden)

    Felipe S. Delgado


    Full Text Available In this paper, we propose and experimentally investigate an optical sensor based on a novel combination of a long-period fiber grating (LPFG with a permanent magnet to measure electrical current in unmanned aerial vehicles (UAVs. The proposed device uses a neodymium magnet attached to the grating structure, which suffers from an electromagnetic force produced when the current flows in the wire of the UAV engine. Therefore, it causes deformation on the sensor and thus, different shifts occur in the resonant bands of the transmission spectrum of the LPFG. Finally, the results show that it is possible to monitor electrical current throughout the entire operating range of the UAV engine from 0 A to 10 A in an effective and practical way with good linearity, reliability and response time, which are desirable characteristics in electrical current sensing.

  14. Bayesian flaw characterization from eddy current measurements with grain noise (United States)

    McMahan, Jerry A.; Aldrin, John C.; Shell, Eric; Oneida, Erin


    The Bayesian approach to inference from measurement data has the potential to provide highly reliable characterizations of flaw geometry by quantifying the confidence in the estimate results. The accuracy of these confidence estimates depends on the accuracy of the model for the measurement error. Eddy current measurements of electrically anisotropic metals, such as titanium, exhibit a phenomenon called grain noise in which the measurement error is spatially correlated even with no flaw present. We show that the most commonly used statistical model for the measurement error, which fails to account for this correlation, results in overconfidence in the flaw geometry estimates from eddy current data, thereby reducing the effectiveness of the Bayesian approach. We then describe a method of modeling the grain noise as a Gaussian process (GP) using spectral mixture kernels, a type of non-parametric model for the covariance kernel of a GP This provides a broadly applicable, data-driven way of modeling correlation in measurement error. Our results show that incorporation of this noise model results in a more reliable estimate of the flaw and better agreement with the available validation data.

  15. An Autonomous Circuit for the Measurement of Photovoltaic Devices Parameters. (United States)


    Hole Diffusion Current (injected minority carriers) Jpp Hole Drift Current k Bolztman Constant (8.6171 x 10-5 eV/k) K Temperature in Kelvin LIPS Living...k = Bolztman constant (8.6171 x 10- 5 eV/K) For a semiconductor that is highly purified, thermal excitation across the band gap, (from the valence

  16. Digital Measuring Devices Used for Injector Hydraulic Test

    Directory of Open Access Journals (Sweden)

    S. N. Leontiev


    Full Text Available To ensure a high specific impulse of the LRE (liquid-propellant engine chamber it is necessary to have optimally organized combustion of the fuel components. This can be ensured by choosing the optimum geometry of gas-dynamic contour of the LRE combustor, as well as by improving the sputtering processes and mixing the fuel components, for example, by selection of the optimum type, characteristics, and location of injectors on the mixing unit of the chamber.These particular reasons arise the interest in the injector characteristics in terms of science, and technological aspects determine the need for control of underlying design parameters in their manufacture.The objective of this work is to give an experimental justification on used digital measurement instrumentation and research the hydraulic characteristics of injectors.To determine injector parameters most widely were used the units with sectional collectors. A technique to control injector parameters using the sectional collectors involves spraying the liquid by injector at a given pressure drop on it for a certain time (the longer, the higher the accuracy and reliability of the results and then determining the amount of liquid in each section to calculate the required parameters of injector.In this work the liquid flow through the injector was determined by high-precision flowmeters FLONET FN2024.1 of electromagnetic type, which have very high metrological characteristics, in particular a flow rate error does not exceed 0.5% in a range of water flow from Qmin= 0.0028 l/s to Qmax Qmax = 0.28 l/s. To determine the coefficient of uneven spray were used differential pressure sensors DMD 331-ASLX of company "DB Sensors RUS", which have an error of 0.075% with a range of differential pressure 0 ... 5 kPa. Measuring complex MIC-200 of company "NPP Measure" and WinPos software for processing array information provided entry, recording, and processing of all the data of the experiment.In this

  17. Reliability of metatarsophalangeal and ankle joint torque measurements by an innovative device. (United States)

    Man, Hok-Sum; Leung, Aaron Kam-Lun; Cheung, Jason Tak-Man; Sterzing, Thorsten


    The toe flexor muscles maintain body balance during standing and provide push-off force during walking, running, and jumping. Additionally, they are important contributing structures to maintain normal foot function. Thus, weakness of these muscles may cause poor balance, inefficient locomotion and foot deformities. The quantification of metatarsophalangeal joint (MPJ) stiffness is valuable as it is considered as a confounding factor in toe flexor muscles function. MPJ and ankle joint stiffness measurement is still largely depended on manual skills as current devices do not have good control on alignment, angular joint speed and displacement during measurement. Therefore, this study introduces an innovative dynamometer and protocol procedures for MPJ and ankle Joint torque measurement with precise and reliable foot alignment, angular joint speed and displacement control. Within-day and between-day test-retest experiments on MPJ and ankle joint torque measurement were conducted on ten and nine healthy male subjects respectively. The mean peak torques of MPJ and ankle joint of between-day and within-day measurement were 1.50±0.38Nm/deg and 1.19±0.34Nm/deg. The corresponding torques of the ankle joint were 8.24±2.20Nm/deg and 7.90±3.18Nm/deg respectively. Intraclass-correlation coefficients (ICC) of averaged peak torque of both joints of between-day and within-day test-retest experiments were ranging from 0.91 to 0.96, indicating the innovative device is systematic and reliable for the measurements and can be used for multiple scientific and clinical purposes.

  18. Spatially resolved voltage, current and electrochemical impedance spectroscopy measurements

    Energy Technology Data Exchange (ETDEWEB)

    Gerteisen, D.; Kurz, T.; Schwager, M.; Hebling, C. [Fraunhofer Institute for Solar Energy Systems ISE, Freiburg im Breisgau (Germany); Merida, W. [Clean Energy Research Centre, University of British Columbia, Vancouver, BC (Canada); Lupotto, P. [Materials Mates Italia, Milano (Italy)


    In this work a 50-channel characterisation system for PEMFCs is presented. The system is capable of traditional electrochemical measurements (e.g. staircase voltammetry, chronoamperometry and cyclic voltammetry), and concurrent EIS measurements. Unlike previous implementations, this system relies on dedicated potentiostats for current and voltage control, and independent frequency response analysers (FRAs) at each channel. Segmented fuel cell hardware is used to illustrate the system's flexibility and capabilities. The results here include steady-state data for cell characterisation under galvanostatic and potentiostatic control as well as spatially resolved impedance spectra. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)


    Directory of Open Access Journals (Sweden)

    S. P. Shalamov


    Full Text Available Purpose. A current meter based on the principle of electromagnetic induction is designed to register the current flowing in the rod lightning. The aim of the article is to describe the way of increasing the sensitivity of the converter by means of their serial communication. Methodology. The recorded current is in the nanosecond range. If compared with other methods, meters based on the principle of electromagnetic induction have several advantages, such as simplicity of construction, reliability, low cost, no need in a power source, relatively high sensitivity. Creation of such a meter is necessary, because in some cases there is no possibility to use a shunt. Transient properties of a meter are determined by the number of turns and the constant of integration. Sensitivity is determined by measuring the number of turns, the coil sectional area, the core material and the integration constant. For measuring the magnetic field pulses with a rise time of 5 ns to 50 ns a meter has turns from 5 to 15. The sensitivity of such a meter is low. When the number of turns is increased, the output signal and the front increase. Earlier described dependencies were used to select the main parameters of the converter. It was based on generally accepted and widely known equivalent circuit. The experience of created earlier pulse magnetic field meters was considered both for measuring the magnetic fields, and large pulse current. Originality. Series connection of converters has the property of a long line. The level of the transient response of the meter is calculated. The influence of parasitic parameters on the type of meter transient response is examined. The shown construction was not previously described. Practical value. The results of meter implementation are given. The design peculiarities of the given measuring instruments are shown.

  20. Measurement of axial injection displacement with trim coil current unbalance (United States)

    Covo, Michel Kireeff


    The Dee probe used for measuring internal radial beam intensity shows large losses inside the radius of 20 cm of the 88 in. cyclotron. The current of the top and bottom innermost trim coil 1 is unbalanced to study effects of the axial injection displacement. A beam profile monitor images the ion beam bunches, turn by turn. The experimental bunch center of mass position is compared with calculations of the magnetic mirror effect displacement and shows good agreement.

  1. Comparison of shipboard acoustic Doppler current profiler and moored current measurements in the Equatorial Pacific (United States)

    Chereskin, T. K.; Regier, L. A.; Halpern, D.


    Depth-averaged current shears computed from shipboard acoustic Doppler current profiler (ADCP) and moored Savonius rotor and vane vector-averaging current meter (VACM) measurements are compared at 35, 62.5, 100 and 140 m depths within 7 km of each other near 0 deg, 140 deg W during a 12-day interval in November 1984. The agreement between the VACM and ADCP shears was excellent. The average root-mean-square difference of hourly shear values was small, approximately 0.0021/s, and the average correlation coefficient was 0.90. Spectral estimates were equivalent to within a 95 percent significance level and the VACM and ADCP shears were 95 percent statistically coherent with zero phase difference for frequencies below 0.2 cycles per hour.

  2. Constant frequency pulsed phase-locked loop measuring device (United States)

    Yost, William T. (Inventor); Kushnick, Peter W. (Inventor); Cantrell, John H. (Inventor)


    A measuring apparatus is presented that uses a fixed frequency oscillator to measure small changes in the phase velocity ultrasonic sound when a sample is exposed to environmental changes such as changes in pressure, temperature, etc. The invention automatically balances electrical phase shifts against the acoustical phase shifts in order to obtain an accurate measurement of electrical phase shifts.

  3. Constant frequency pulsed phase-locked loop measuring device (United States)

    Yost, William T.; Kushnick, Peter W.; Cantrell, John H.


    A measuring apparatus is presented that uses a fixed frequency oscillator to measure small changes in the phase velocity ultrasonic sound when a sample is exposed to environmental changes such as changes in pressure, temperature, etc. The invention automatically balances electrical phase shifts against the acoustical phase shifts in order to obtain an accurate measurement of electrical phase shifts.

  4. Constant frequency pulsed phase-locked loop measuring device (United States)

    Yost, William T.; Kushnick, Peter W.; Cantrell, John H.


    A measuring apparatus is presented that uses a fixed frequency oscillator to measure small changes in the phase velocity ultrasonic sound when a sample is exposed to environmental changes such as changes in pressure, temperature, etc. The invention automatically balances electrical phase shifts against the acoustical phase shifts in order to obtain an accurate measurement of electrical phase shifts.

  5. The wave vane - A device to measure the breaker angle

    Digital Repository Service at National Institute of Oceanography (India)

    Chandramohan, P.; Nayak, B.U.; Anand, N.M.

    was found to give the wave directional information fairly accurate for the open coast where the influence of tidal currents was negligible. INTRODUCTION The usual littoral environmental observation (LEO) programme mainly consists of observations... on the breaking wave height, the wave period, the breaker angle, type of breaker, breaking zone width, longshore current veloc- ity and direction, nearshore slope etc. The LEO data are generally used to evaluate the sediment transport rates in the surf zone...

  6. Validity and Reliability of a New Device (WIMU®) for Measuring Hamstring Muscle Extensibility. (United States)

    Muyor, José M


    The aims of the current study were 1) to evaluate the validity of the WIMU(®) system for measuring hamstring muscle extensibility in the passive straight leg raise (PSLR) test using an inclinometer for the criterion and 2) to determine the test-retest reliability of the WIMU(®) system to measure hamstring muscle extensibility during the PSLR test. 55 subjects were evaluated on 2 separate occasions. Data from a Unilever inclinometer and WIMU(®) system were collected simultaneously. Intraclass correlation coefficients (ICCs) for the validity were very high (0.983-1); a very low systematic bias (-0.21°--0.42°), random error (0.05°-0.04°) and standard error of the estimate (0.43°-0.34°) were observed (left-right leg, respectively) between the 2 devices (inclinometer and the WIMU(®) system). The R(2) between the devices was 0.999 (p<0.001) in both the left and right legs. The test-retest reliability of the WIMU(®) system was excellent, with ICCs ranging from 0.972-0.995, low coefficients of variation (0.01%), and a low standard error of the estimate (0.19-0.31°). The WIMU(®) system showed strong concurrent validity and excellent test-retest reliability for the evaluation of hamstring muscle extensibility in the PSLR test. © Georg Thieme Verlag KG Stuttgart · New York.

  7. Development of a Force Measurement Device for Lower-Body Muscular Strength Measuring of Skaters (United States)

    Kim, Dong Ki; Lee, Jeong Tae

    This paper presents a force measurement system that can measure a lower-body muscular strength of skaters. The precise measurement and analysis of the left and right lower-body strength of skaters is necessary, because a left/right lower-body strength balance is helpful to improve the athletes' performance and to protect them from injury. The system is constructed with a skate sliding board, a couple of sensor-units with load cell, indicator and control box, guard, force pad, and support bracket. The developed force measurement system is calibrated by the calibration setup, and the uncertainty of the force sensing unit on the left is within 0.087% and the uncertainty of the force sensing unit on the right is within 0.109%. In order to check the feasibility of the developed measurement device, a kinematic analysis is conducted with skater. As a result, the subject shows the deviation of left and right of 12.1 N with respect to average strength and 39.1 N with respect to the maximum strength. This evaluation results are reliable enough to make it possible to measure a lower-body muscular strength of skaters. The use of this measurement system will be expected to correct the posture of skaters and record the sports dynamics data for each athlete. It is believed that through the development of this equipment, skaters in elementary, middle, high schools, colleges, and the professional level have the systematic training to compete with world-class skaters.

  8. Direct-current proton-beam measurements at Los Alamos

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, J.; Stevens, R.R.; Schneider, J.D.; Zaugg, T.


    Recently, a CW proton accelerator complex was moved from Chalk River Laboratories (CRL) to Los Alamos National Laboratory. This includes a 50-keV dc proton injector with a single-solenoid low-energy beam transport system (LEBT) and a CW 1.25-MeV, 267-MHz radiofrequency quadrupole (RFQ). The move was completed after CRL had achieved 55-mA CW operation at 1.25 MeV using 250-kW klystrode tubes to power the RFQ. These accelerator components are prototypes for the front end of a CW linac required for an accelerator-driven transmutation linac, and they provide early confirmation of some CW accelerator components. The injector (ion source and LEBT) and emittance measuring unit are installed and operational at Los Alamos. The dc microwave ion source has been operated routinely at 50-keV, 75-mA hydrogen-ion current. This ion source has demonstrated very good discharge and H{sub 2} gas efficiencies, and sufficient reliability to complete CW RFQ measurements at CRL. Proton fraction of 75% has been measured with 550-W discharge power. This high proton fraction removes the need for an analyzing magnet. Proton LEBT emittance measurements completed at Los Alamos suggest that improved transmission through the RFQ may be achieved by increasing the solenoid focusing current. Status of the final CW RFQ operation at CRL and the installation of the RFQ at Los Alamos is given.

  9. Methods and devices used to measure friction in rolling

    DEFF Research Database (Denmark)

    Jeswiet, J.; Arentoft, Mogens; Henningsen, Poul


    a good understanding of the mechanisms at the interface and to be able to verify the friction and tribology models that exist, friction sensors are needed. Designing sensors to measure frictional stress in metal working has been pursued by many researchers. This paper surveys methods that have been used...... to measure friction in rolling in the past and discusses some of the recent sensor designs that can now be used to measure friction both in production situations and for research purposes....

  10. A discrete geometric formulation for eddy-current problems in fusion devices (United States)

    Bettini, Paolo; Furno Palumbo, Maurizio; Specogna, Ruben


    All thermonuclear controlled fusion devices under construction or design have such high performances to require a special care in the dimensioning of various components, specifically from the electromagnetic point of view. To this purpose, it is fundamental to develop models which are both accurate (i.e. able to describe the physical phenomena) and predictive (i.e. useful not only to explain what happens in running experiments, but also to reliably extrapolate to other range of parameters). The dynamics of fusion plasmas is often conveniently described by Magneto-Hydro-Dynamics (MHD) equations, which predict that some unstable evolution modes may exist. On the other hand, the complexity of the intrinsically 3D model of the interactions between a realistic unstable plasma, the surrounding passive structures (important to guarantee a good MHD stability) and the active conductors (coils) require the numerical solution of challenging electromagnetic problems. In this work a discrete geometric formulation for eddy-current problems in the frequency domain is developed; the magnetic fields produced by a typical active coil system is calculated in the presence of 3D conductive structures.

  11. [Devic syndrome--case report, current principles of diagnosis and therapy]. (United States)

    Iljicsov, Anna; Barsi, Péter; Várallyay, György; Tátrai, Erika; Somfai, Gábor Márk; Bereczki, Dánieli; Rudas, Gábor; Simó, Magdolna


    Neuromyelitis optica (NMO, Devic-syndrome) is a rare, relapsing autoimmune disease of the central nervous system, which is distinguished from other demyelinating disorders by a recently identified, specific autoantibody. By demonstrating the anti-aquaporin-4 IgG in the serum, a heterogenous group of syndromes can be defined, called NMO-spectrum. In the future, optical coherence tomography may support this diagnosis besides the clinical features, imaging examinations and presence of serum antibody. Early recognition and treatment can improve clinical outcome even in serious condition. Long-term immunosuppressive therapy is advised to prevent further relapses and to stabilize or improve clinical status. Hereby, we report a case of a 51-year-old woman, under treatment for one and a half years. We summarize the current knowledge about the pathomechanism, diagnostic strategy and therapy of neuromyelitis optica. We review recent findings and the diagnostic value of a new, non-invasive ophtalmological examination, the optical coherence tomography. According to the first results, this method may be helpful in the early differential diagnosis of optic neuritis.

  12. A Simple Laser-Based Device for Simultaneous Microbial Culture and Absorbance Measurement

    CERN Document Server

    Abrevaya, X C; Areso, O; Mauas, P J D


    In this work we present a device specifically designed to study microbial growth with several applications related to environmental microbiology and other areas of research as astrobiology. The Automated Measuring and Cultivation device (AMC-d) enables semi-continuous absorbance measurements directly during cultivation. It can measure simultaneously up to 16 samples. Growth curves using low and fast growing microorganism were plotted, including: Escherichia coli, and Haloferax volcanii, an halophilic archaeon.

  13. Information measurement system based on the device for evaluation of optical surface quality (United States)

    Izotov, Pavel Y.


    The work describes steps taken in order to create the information-measurement system based on the device for evaluation of surface cleanliness and smoothness of optical substrates. The approach used leads to the improvement the stability and accuracy of measurements. Structural changes applied to both the software and hardware of the device which allowed retrieval of better quality images during the course of measurements are designated. Problems emerged during the implementation of the system and their solutions are described.

  14. The current status of continuous noninvasive measurement of total, carboxy, and methemoglobin concentration. (United States)

    Shamir, Micha Y; Avramovich, Aharon; Smaka, Todd


    Intraoperative early detection of anemia, identifying toxic levels of carboxyhemoglobin after carbon monoxide exposure and titrating drug dosage to prevent toxic levels of methemoglobin are important goals. The pulse oximeter works by illuminating light into the tissue and sensing the amount of light absorbed. The same methodology is used by laboratory hemoglobinometers to measure hemoglobin concentration. Because both devices work in the same way, efforts were made to modify the pulse oximeter to also measure hemoglobin concentration. Currently there are 2 commercial pulse oximeters (Masimo Rainbow SET and OrSense NBM-200MP) that measure total hemoglobin concentration and one (Masimo) that also measures methemoglobin and carboxyhemoglobin. In this review, we describe the peer-reviewed literature addressing the accuracy of these monitors.

  15. Nausea: current knowledge of mechanisms, measurement and clinical impact. (United States)

    Kenward, Hannah; Pelligand, Ludovic; Savary-Bataille, Karine; Elliott, Jonathan


    Nausea is a subjective sensation, which often acts as a signal that emesis is imminent. It is a widespread problem that occurs as a clinical sign of disease or as an adverse effect of a drug therapy or surgical procedure. The mechanisms of nausea are complex and the neural pathways are currently poorly understood. This review summarises the current knowledge of nausea mechanisms, the available animal models for nausea research and the anti-nausea properties of commercially available anti-emetic drugs. The review also presents subjective assessment and scoring of nausea. A better understanding of the underlying mechanisms of nausea might reveal potential clinically useful biomarkers for objective measurement of nausea in species of veterinary interest.

  16. Accurate periodicity measurement of superconducting quantum interference device magnetic flux response. (United States)

    Nakanishi, Masakazu


    It is theoretically explained that a response of a superconducting quantum interference device (SQUID) is periodically dependent on total magnetic flux coupling to the SQUID ring (Φ) and its period is a flux quantum (Φ(o)=h/2e, where h and e, respectively, express Planck's constant and elementary charge). For example, the voltage of an electromagnetically oscillated rf-SQUID or a current biased dc-SQUID is thought to be periodically dependent on Φ with a period of Φ(o). In this paper, we propose an accurate method to check the periodicity of a SQUID response by using a set of sensing coils covered with a superconducting sheath. As a demonstration, we measured periodicity of a commercially available thin-film type rf-SQUID response in magnetic flux ranging up to approximately 4300Φ(o). Its flux dependence was periodic below about 3400Φ(o).

  17. Method of controlling illumination device based on current-voltage model

    DEFF Research Database (Denmark)


    The present invention relates to an illumination device comprising a number of LEDs, means for receiving an input signal, means for generating an activation signal for at least one of the LEDs based on the input signal. The illumination device comprises further means for obtaining the voltage...... and the colorimetric properties of said light emitted by LED. The present invention relates also to a method of controlling and a meted of calibrating such illumination device....

  18. A pilot study of a new spectrophotometry device to measure tissue oxygen saturation. (United States)

    Abel, Gemma; Allen, John; Drinnan, Michael


    Tissue oxygen saturation (SO2) measurements have the potential for far wider use than at present but are limited by device availability and portability for many potential applications. A device based on a small, low-cost general-purpose spectrophotometer (the Harrison device) might facilitate wider use. The aim of this study was to compare the Harrison device with a commercial instrument, the LEA O2C.Measurements were carried out on the forearm and finger of 20 healthy volunteers, using a blood pressure cuff on the upper arm to induce different levels of oxygenation. Repeatability of both devices was assessed, and the Bland-Altman method was used to assess agreement between them.The devices showed agreement in overall tracking of changes in SO2. Test-retest agreement for the Harrison device was worse than for O2C, with SD repeatability of 10.6% (forearm) or 18.6% (finger). There was no overall bias between devices, but mean (SD) difference of 1.2 (11.8%) (forearm) or 4.4 (11.5%) (finger) were outside of a clinically acceptable range.Disagreements were attributed to the stability of the Harrison probe and the natural SO2 variations across the skin surface increasing the random error. Therefore, though not equivalent to the LEA O2C, a probe redesign and averaged measurements may help establish the Harrison device as a low cost alternative.

  19. Calculation of smoke plume mass from passive UV satellite measurements by GOME-2 polarization measurement devices (United States)

    Penning de Vries, M. J. M.; Tuinder, O. N. E.; Wagner, T.; Fromm, M.


    The Wallow wildfire of 2011 was one of the most devastating fires ever in Arizona, burning over 2,000 km2 in the states of Arizona and New Mexico. The fire originated in the Bear Wallow Wilderness area in June, 2011, and raged for more than a month. The intense heat of the fire caused the formation of a pyro-convective cloud. The resulting smoke plume, partially located above low-lying clouds, was detected by several satellite instruments, including GOME-2 on June 2. The UV Aerosol Index, indicative of aerosol absorption, reached a maximum of 12 on that day, pointing to an elevated plume with moderately absorbing aerosols. We have performed extensive model calculations assuming different aerosol optical properties to determine the total aerosol optical depth of the plume. The plume altitude, needed to constrain the aerosol optical depth, was obtained from independent satellite measurements. The model results were compared with UV Aerosol Index and UV reflectances measured by the GOME-2 polarization measurement devices, which have a spatial resolution of roughly 10x40 km2. Although neither the exact aerosol optical properties nor optical depth can be obtained with this method, the range in aerosol optical depth values that we calculate, combined with the assumed specific extinction mass factor of 5 m2/kg lead us to a rough estimate of the smoke plume mass that cannot, at present, be assessed in another way.

  20. Characterisation of a micro-plasma device sensor using electrical measurements and emission spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Mariotti, D


    This thesis reports on research undertaken on the characterisation of a micro-plasma device to be used for gas analysis by mean of plasma emission spectroscopy. The work covers aspects related to the micro-plasma electrical and optical emission parameters, and their importance for the utilisation of the micro-plasma device in gas analysis. Experimental results have been used to analyse the fundamental micro-plasma processes and to develop a model, which could provide additional information. This dissertation contains a general literature review of topics related to plasma physics, plasma emission spectroscopy, gas analysis (chemical analysis and artificial olfaction) and other micro-plasma applications. Experimental work focuses on two main areas: electrical measurements and emission measurements. Firstly, electrical measurements are taken and interpretations are given. Where necessary, new theoretical treatments are suggested in order to describe better the physical phenomena. Plasma emission has been considered under different working conditions. This allowed the characterisation of the micro-plasma emission and also a better understanding of the micro-plasma processes. On the basis of the experimental data obtained and other assumptions a model has been developed. A computer simulation based on this model provided additional useful information on the micro- plasma behaviour. The first fundamental implication of this new research is the peculiar behaviour of the micro-plasma. This micro-plasma exhibited deviations from Paschen law and strong dependency on cathode material, which contributed to the formation of a low current stable regime. These results have been followed by physical interpretations and theoretical descriptions. The second implication is the establishment of the boundaries and of the influencing parameters for plasma emission spectroscopy as an analytical tool in this particular micro-plasma. From the applied perspective this study has shown that

  1. Parameter Estimation of Inverter and Motor Model at Standstill using Measured Currents Only

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Knudsen, Morten; Tønnes, M.


    to the system is the reference values for the stator voltages given as duty cycles for the Pulse With Modulated power device. The system output is the measured stator currents. Three experiments are describedgiving respectively 1) the stator resistance and inverter parameters, 2) the stator transient inductance...... and 3) the referred rotor rotor resistance and magnetizing inductance. The method developed in the two last experiments is independent of the inverter nonlinearity. New methods for system identification concerning saturation of the magnetic flux are given and a reference value for the flux level...

  2. Leakage current measurement of protective equipment insulating materials used in electrical installations (United States)

    Buică, G.; Dobra, R.; Păsculescu, D.; Tătar, A.


    This research describes the behaviour of equipment and safety devices during use in extreme environmental conditions, in order to establish the technical conditions and additional health and safety requirements during operation, to ensure the health and safety of users, regardless of conditions and working environment in which they are use. The studies have been conducted both on new equipment and means of protection used in electrical installations. There has been evaluated protective equipment made of insulating rubber, reinforced fiberglass or PVC. They have been followed the technical characteristics and protection against electric shock by measuring the leakage current of different insulating materials.

  3. Negative Capacitance Tunnel Field Effect Transistor: A Novel Device with Low Subthreshold Swing and High ON Current

    CERN Document Server

    Chowdhury, Nadim; Khosru, Quazi D M


    In this paper we propose a modified structure of TFET incorporating ferroelectric oxide as the complementary gate dielectric operating in negative capacitance zone, called the Negative Capacitance Tunnel FET (NCTFET). The proposed device effectively combines two different mechanisms of lowering the sub threshold swing (SS) for a transistor garnering a further lowered one compared to conventional TFET. A simple yet accurate analytical tunnel current model for the proposed device is also presented here. The developed analytical model demonstrates high ON current at low $V_{GS}$ and exhibits lower SS.

  4. Enhancing the performance of the measurement-device-independent quantum key distribution with heralded pair-coherent sources

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Feng; Zhang, Chun-Hui; Liu, Ai-Ping [Institute of Signal Processing Transmission, Nanjing University of Posts and Telecommunications, Nanjing 210003 (China); Key Lab of Broadband Wireless Communication and Sensor Network Technology, Nanjing University of Posts and Telecommunications, Ministry of Education, Nanjing 210003 (China); Wang, Qin, E-mail: [Institute of Signal Processing Transmission, Nanjing University of Posts and Telecommunications, Nanjing 210003 (China); Key Lab of Broadband Wireless Communication and Sensor Network Technology, Nanjing University of Posts and Telecommunications, Ministry of Education, Nanjing 210003 (China); Key Laboratory of Quantum Information, University of Science and Technology of China, Hefei 230026 (China)


    In this paper, we propose to implement the heralded pair-coherent source into the measurement-device-independent quantum key distribution. By comparing its performance with other existing schemes, we demonstrate that our new scheme can overcome many shortcomings existing in current schemes, and show excellent behavior in the quantum key distribution. Moreover, even when taking the statistical fluctuation into account, we can still obtain quite high key generation rate at very long transmission distance by using our new scheme. - Highlights: • Implement the heralded pair-coherent source into the measurement-device-independent quantum key distribution. • Overcome many shortcomings existing in current schemes and show excellent behavior. • Obtain quite high key generation rate even when taking statistical fluctuation into account.

  5. Comparison of the methods for determination of calibration and verification intervals of measuring devices

    Directory of Open Access Journals (Sweden)

    Toteva Pavlina


    Full Text Available The paper presents different determination and optimisation methods for verification intervals of technical devices for monitoring and measurement based on the requirements of some widely used international standards, e.g. ISO 9001, ISO/IEC 17020, ISO/IEC 17025 etc., maintained by various organizations implementing measuring devices in practice. Comparative analysis of the reviewed methods is conducted in terms of opportunities for assessing the adequacy of interval(s for calibration of measuring devices and their optimisation accepted by an organization – an extension or reduction depending on the obtained results. The advantages and disadvantages of the reviewed methods are discussed, and recommendations for their applicability are provided.

  6. Trustworthiness of measurement devices in round-robin differential-phase-shift quantum key distribution (United States)

    Cao, Zhu; Yin, Zhen-Qiang; Han, Zheng-Fu


    Round-robin differential-phase-shift quantum key distribution (RRDPS QKD) has been proposed to raise the noise tolerability of the channel. However, in practice, the measurement device in RRDPS QKD may be imperfect. Here, we show that, with these imperfections, the security of RRDPS may be damaged by proposing two attacks for RRDPS systems with uncharacterized measurement devices. One is valid even for a system with unit total efficiency, while the other is valid even when a single-photon state is sent. To prevent these attacks, either security arguments need to be fundamentally revised or further practical assumptions on the measurement device should be put.

  7. Survey of spectral response measurements for photovoltaic devices

    Energy Technology Data Exchange (ETDEWEB)

    Hartman, J.S.; Lind, M.A.


    A survey of the photovoltaic community was conducted to ascertain the present state-of-the-art for PV spectral response measurements. Specific topics explored included measurement system designs, good and bad features of the systems, and problems encountered in the evaluation of specific cell structures and materials. The survey showed that most spectral response data are used in diagnostic analysis for the optimization of developmental solar cells. Measurement systems commonly utilize a chopped narrowband source in conjunction with a constant bias illumination which simulates the ambient end use environment. Researchers emphasized the importance of bias illumination for all types of cells in order to minimize the effects of nonlinearities in cell response. Not surprisingly single crystal silicon cells present the fewest measurement problems to the researcher and have been studied more thoroughly than any other type of solar cell. But, the accurate characterization of silicon cells is still difficult and laboratory intercomparison studies have yielded data scatter ranging from +-5% to +-15%. The measurement experience with other types of cells is less extensive. The development of reliable data bases for some solar cells is complicated by problems of cell nonuniformity, environmental instability, nonlinearity, etc. Cascade cells present new problems associated with their structue (multiple cells in series) which are just beginning to be understood. In addition, the importance of many measurement parameters (spectral content of bias light, bias light intensity, bias voltage, chopping frequency, etc.) are not fully understood for most types of solar cells.

  8. Measurement campaign on connectivity of mesh networks formed by mobile devices

    DEFF Research Database (Denmark)

    Pietrarca, Beatrice; Sasso, Giovanni; Perrucci, Gian Paolo


    This paper reports the results of a measurement campaign on the connectivity level of mobile devices using Bluetooth (BT) to form cooperative mobile mesh networks. Such mobile mesh networks composed of mobile devices are the basis for any peer-to-peer communication like wireless grids or social...

  9. The bias in current measures of gestational weight gain. (United States)

    Hutcheon, Jennifer A; Bodnar, Lisa M; Joseph, K S; Abrams, Barbara; Simhan, Hyagriv N; Platt, Robert W


    Conventional measures of gestational weight gain (GWG), such as average rate of weight gain, are likely to be correlated with gestational duration. Such a correlation could introduce bias to epidemiological studies of GWG and adverse perinatal outcomes because many perinatal outcomes are also correlated with gestational duration. This study aimed to quantify the extent to which currently used GWG measures may bias the apparent relationship between maternal weight gain and risk of preterm birth. For each woman in a provincial perinatal database registry (British Columbia, Canada, 2000-2009), a total GWG was simulated such that it was uncorrelated with risk of preterm birth. The simulation was based on serial antenatal GWG measurements from a sample of term pregnancies. Simulated GWGs were classified using three approaches: total weight gain (kg), average rate of weight gain (kg/week) or adequacy of GWG in relation to Institute of Medicine recommendations. Their association with preterm birth ≤32 weeks was explored using logistic regression. All measures of GWG induced an apparent association between GWG and preterm birth ≤32 weeks even when, by design, none existed. Odds ratios in the lowest fifths of each GWG measure compared with the middle fifths ranged from 4.4 [95% confidence interval (CI) 3.6, 5.4] (total weight gain) to 1.6 [95% CI 1.3, 2.0] (Institute of Medicine adequacy ratio). Conventional measures of GWG introduce serious bias to the study of maternal weight gain and preterm birth. A new measure of GWG that is uncorrelated with gestational duration is needed. © 2012 Blackwell Publishing Ltd.

  10. The Current Economic Crisis: Effects, Consequences, Measures and Solutions

    Directory of Open Access Journals (Sweden)

    Liana-Antonela BONTA (cas. MITEA


    Full Text Available The main objective of the present research project is the current economiccrisis, its effects, consequences but especially the measures and the solutions that we can find to resolve this situation. A key problem preoccupying developing countries today is the global economic crisis and how they can address it. The epicenter of the crisis is in the developed countries, especially the USA. But the developing countries that have no role in causing the crisis have suffered the most severe “collateral damage”. I will try to present the similarities with other periods of recession that we have crossed-over time. I will propose a few measures to remedy this situation, both long-term and short-term, referring of course to Romania and EU as well.

  11. Grade 1 spondylolisthesis and interspinous device placement: removal in six patients and analysis of current data

    Directory of Open Access Journals (Sweden)

    Parker E Bohm


    Conclusions: Regarding patients receiving interspinous devices for symptomatic lumbar spinal stenosis, several high-quality studies have failed to demonstrate a statistical difference in outcomes between patients with or without Grade 1 spondylolisthesis. Nevertheless, surgeons should have a high degree of suspicion when considering use of interspinous devices in this patient population.

  12. Microfluidic Devices for the Measurement of Cellular Secretion (United States)

    Schrell, Adrian M.; Mukhitov, Nikita; Yi, Lian; Wang, Xue; Roper, Michael G.


    The release of chemical information from cells and tissues holds the key to understanding cellular behavior and dysfunction. The development of methodologies that can measure cellular secretion in a time-dependent fashion is therefore essential. Often these measurements are made difficult by the high-salt conditions of the cellular environment, the presence of numerous other secreted factors, and the small mass samples that are produced when frequent sampling is used to resolve secretory dynamics. In this review, the methods that we have developed for measuring hormone release from islets of Langerhans are dissected to illustrate the practical difficulties of studying cellular secretions. Other methods from the literature are presented that provide alternative approaches to particularly challenging areas of monitoring cellular secretion. The examples presented in this review serve as case studies and should be adaptable to other cell types and systems for unique applications.

  13. Current status of outcome measure development in vasculitis. (United States)

    Merkel, Peter A; Aydin, Sibel Z; Boers, Maarten; Cornell, Christina; Direskeneli, Haner; Gebhart, Don; Hatemi, Gulen; Luqmani, Raashid; Matteson, Eric L; Milman, Nataliya; Robson, Joanna; Seo, Philip; Tomasson, Gunnar


    The conduct of randomized controlled trials for vasculitis, especially for the antineutrophil cytoplasmic antibody-associated vasculitides [AAV, granulomatosis with polyangiitis (Wegener's) and microscopic polyangiitis], has been greatly advanced by the development, use, and acceptance of validated outcome measures. Trials have subsequently provided the opportunity to validate and refine reliable, valid outcome measures for these multisystemic and relapsing rare diseases. The Outcome Measures in Rheumatology (OMERACT) Vasculitis Working Group was formed in 2004 to foster development of validated and widely accepted outcomes in vasculitis using data-driven analyses, a dedication to building consensus, and adherence to, and guidance by, the principles of the OMERACT approach. This work led to the endorsement by OMERACT of the core set of domains and associated outcome measures for AAV. Next steps for the study of existing outcome tools in AAV include better definition of response criteria through development of more data-driven weighting of the elements of activity and damage assessment. The Working Group is now also embarking on a series of linked projects to develop validated patient-reported outcomes for use in clinical research in vasculitis. Additionally, the Working Group is studying how current methods of disease assessment and plans for new outcomes can be informed by the conceptual framework of the International Classification of Function of the World Health Organization. The success of the Group's work in AAV has also led to a formal process for developing outcomes for the large vessel vasculitides (Takayasu arteritis and giant cell arteritis) and Behçet disease.

  14. The study of pressure measurement techniques and devices in the range of 10(exp -1) to 10(exp -5) torr (2 millipsi to 0.2 micropsi) (United States)

    Hoffman, John H.


    The atmospheric pressure range was studied in a region where conventional pressure sensing devices do not provide meaningful measurements. However, a hot filament gauge was developed and miniaturized which will measure the pressure in the 10(exp -1) to 10(exp -5) torr (2 millipsi to 0.2 micropsi) region, hence the name Micropsi gauge. Laboratory studies were made comparing the currently available devices with the newly developed miniature low power 'Micropsi' pressure sensor.

  15. Current Measurements of Low-Intensity Beams at CRYRING

    CERN Document Server

    Paál, A; Källberg, A


    The demand for new ion species leads to an increasing number of cases in which the ions can only be produced in small quantities. Thus, weak ion currents quite often have to be handled in low energy ion storage ring, like CRYRING. Various detector systems have been developed to measure such low intensity coasting and bunched beams by using the overlapping ranges of those systems. We have extended the RMS resolution to 1 nA of the Bergoz Beam Charge Monitor (BCM) by using a low noise 60 dB preamplifier for the Integrating Current Transformer. The sum signal of a capacitive pick-up is integrated by a second gated integrator and the BCM output signal is used for calibration. The RMS resolution is about 100 pA.. To measure the coasting beam intensity, neutral particle detectors have been built. The fast Microchannel plate detector can handle 1 Mc/s, and a 50 Mc/s Secondary Electron Multiplier based detector is under construction. On the magnetic flat top, a time of 100 ms is available to calibrate the count r...

  16. Device characterization and optimization of small molecule organic solar cells assisted by modelling simulation of the current-voltage characteristics. (United States)

    Zuo, Yi; Wan, Xiangjian; Long, Guankui; Kan, Bin; Ni, Wang; Zhang, Hongtao; Chen, Yongsheng


    In order to understand the photovoltaic performance differences between the recently reported DR3TBTT-HD and DR3TBDT2T based solar cells, a modified two-diode model with Hecht equation was built to simulate the corresponding current-voltage characteristics. The simulation results reveal that the poor device performance of the DR3TBDTT-HD based device mainly originated from its insufficient charge transport ability, where an average current of 5.79 mA cm(-2) was lost through this pathway at the maximum power point for the DR3TBDTT-HD device, nearly three times as large as that of the DR3TBDT2T based device under the same device fabrication conditions. The morphology studies support these simulation results, in which both Raman and 2D-GIXD data reveal that DR3TBTT-HD based blend films exhibit lower crystallinity. Spin coating at low temperature was used to increase the crystallinity of DR3TBDTT-HD based blend films, and the average current loss through insufficient charge transport at maximum power point was suppressed to 2.08 mA cm(-2). As a result, the average experimental power conversion efficiency of DR3TBDTT-HD based solar cells increased by over 40%.

  17. Wave-current interactions in deep water conditions: field measurements and analyses (United States)

    Rougier, Gilles; Rey, Vincent; Molcard, Anne


    The study of wave - current interaction has drawn interest in oceanography, ocean engineering, maritime navigation and for tides or waves power device design. In the context of the hydrodynamics study along the French Mediterranean coast, a current profiler was deployed near Toulon at the south of the "Port Cros" island. This coastal zone is characterized by a steep slope, the water depth varying from tens meters to several thousand meters over few kilometers from the coast. An ambient current, the "Northern Current", coming from the Ligurian sea (area of Genoa, Italy) and following the coast up to Toulon, is present all over the year. Its mean surface velocity is of about 0.30 m/s, its flow rate of about 1.5 Sv. The region is exposed to two dominating winds: the Mistral, coming from North-West, and Eastern winds. Both generate swell and/or wind waves in either following or opposing current conditions with respect to the Northern Current. A current profiler equipped with a wave tracking system (ACPD workhorse from RDI) was deployed from July to October 2014 in deep water conditions (depth of about 500m). The mooring system allowed the ADCP to measure the current profile from the sea surface down to 25m depth, which corresponds more or less to the depth of influence of waves of periods up to 10s. The collected data include energetic wave conditions in either following or opposing current conditions. The current intensity and its vertical profiles have shown a significant temporal variability according to the meteorological conditions. Effects of the wave conditions on the current properties are discussed. ACKNOWLEDGEMENTS This work was supported by the program BOMBYX and the ANR grant No ANR-13-ASTR-0007.

  18. 32 CFR 634.27 - Speed-measuring devices. (United States)


    ... CRIMINAL INVESTIGATIONS MOTOR VEHICLE TRAFFIC SUPERVISION Traffic Supervision § 634.27 Speed-measuring.... (v) Demonstrate basic skills in checking calibration and operating the specific radar instrument(s). (vi) Demonstrate basic skills in preparing and presenting records and courtroom testimony relating...

  19. 40 CFR 1065.275 - N2O measurement devices. (United States)


    ... infra-red (NDIR) analyzer. You may use an NDIR analyzer that has compensation algorithms that are... for any compensation algorithm is 0.0% (that is, no bias high and no bias low), regardless of the... has compensation algorithms that are functions of other gaseous measurements and the engine's known...

  20. Accuracy of Oxygen Consumption and Carbon Dioxide Elimination Measurements in 2 Breath-by-Breath Devices. (United States)

    Smallwood, Craig D; Kheir, John N; Walsh, Brian K; Mehta, Nilesh M


    Although accurate quantification of oxygen consumption (V̇O2 ) and carbon dioxide elimination (V̇CO2 ) provides important insights into a patient's nutritional and hemodynamic status, few devices exist to accurately measure these parameters in children. Therefore, we assessed the accuracy and agreement of 2 devices currently on the market using a pediatric in vitro model of gas exchange. We utilized a Huszczuk simulation model, which simulates oxygen consumption and carbon dioxide production using gas dilution, to examine the accuracy of two FDA-cleared respiratory modules (E-COVX and E-sCAiOVX-00). V̇O2 and V̇CO2 were set at 20, 40, 60, and 100 mL/min, ranges typical for infant and pediatric patients. Bland-Altman analysis was used to calculate the bias and limits of agreement of each device relative to simulated values for V̇O2 and V̇CO2 . The E-COVX mean percentage bias (limits of agreement) was -26.3% (-36.1 to -16.6%) and -39.3% (-47.5 to -31.1%) for V̇O2 and V̇CO2 , respectively. The mean bias (limits of agreement) for the E-aCAiOVX-00 was -0.5% (-13.3 to 12.3%) and -6.0% (-13.8 to 1.7%) for V̇O2 and V̇CO2 , respectively. The E-COVX demonstrated bias and limits of agreement that were not clinically acceptable; therefore, application of this module to pediatric patients would not be recommended. The new module, E-sCAiOVX, demonstrated acceptable bias and limits of agreement for the V̇O2 and V̇CO2 in the range 40-100 mL/min (which corresponds to patients in the range of ∼5-16 kg). Copyright © 2017 by Daedalus Enterprises.

  1. Device for Measuring Low Flow Speed in a Duct (United States)

    Quinn, Frank; Magee, Kevin


    A multiple-throat venturi system has been invented for measuring laminar flow of air or other gas at low speed (1 to 30 cm/s) in a duct while preserving the laminar nature of the flow and keeping the velocity profile across the duct as nearly flat as possible. While means for measuring flows at higher speeds are well established, heretofore, there have been no reliable means for making consistent, accurate measurements in this speed range. In the original application for which this system was invented, the duct leads into the test section of a low-speed wind tunnel wherein uniform, low-speed, laminar flow is required for scientific experiments. The system could also be used to monitor a slow flow of gas in an industrial process like chemical vapor deposition. In the original application, the multiple- throat venturi system is mounted at the inlet end of the duct having a rectangular cross section of 19 by 14 cm, just upstream of an assembly of inlet screens and flow straighteners that help to suppress undesired flow fluctuations (see Figure 1). The basic venturi measurement principle is well established: One measures the difference in pressure between (1) a point just outside the inlet, where the pressure is highest and the kinetic energy lowest; and (2) the narrowest part (the throat) of the venturi passage, where the kinetic energy is highest and the pressure is lowest. Then by use of Bernoulli s equation for the relationship between pressure and kinetic energy, the volumetric flow speed in the duct can be calculated from the pressure difference and the inlet and throat widths. The design of this system represents a compromise among length, pressure recovery, uniformity of flow, and complexity of assembly. Traditionally, venturis are used to measure faster flows in narrower cross sections, with longer upstream and downstream passages to maintain accuracy. The dimensions of the passages of the present venturi system are sized to provide a readily measurable

  2. Principle and Control Design of Active Ground-Fault Arc Suppression Device for Full Compensation of Ground Current

    DEFF Research Database (Denmark)

    Wang, Wen; Zeng, Xiangjun; Yan, Lingjie;


    Traditional ground-fault arc suppression devices mainly deal with capacitive component of ground current and have weak effect on the active and harmonic ones, which limits the arc suppression performance. The capacitive current detection needed in them suffers from low accuracy and robustness....... The commonly-used large-capacity reactive component may bring about overvoltage because of possible resonance with the distributed phase-to-ground capacitance. To solve these problems, an active ground-fault arc suppression device is presented. It employs a topology based on single-phase inverter to inject...... current into the neutral without any large-capacity reactors, and thus avoids the aforementioned overvoltage. It compensates all the active, reactive and harmonic components of the ground current to reliably extinguish the ground-fault arcs. A dual-loop voltage control method is proposed to realize arc...

  3. Atmospheric Point Discharge Currents measured with a bi-polar logarithmic current amplifier (United States)

    Marlton, G.; Harrison, R. G.; Nicoll, K. A.


    Point Discharge Currents (PDC) flow in conductors exposed to the atmosphere when strong ambient electric fields cause breakdown of air. This can occur because of field intensification around a sharp point. In some cases point discharge can even become visible, known as St Elmo's fire, one of the longest recognized phenomena in atmospheric electricity. Due to the wide range of magnitudes of currents of both polarities encountered in measuring PDCs, a bipolar logarithmic current amplifier is used here for atmospheric investigations. During an installation at the Reading Atmospheric observatory, it was able to detect PDC of magnitude 0.5μA during periods of strong electric fields, in disturbed weather. Two useful attributes for planetary applications have been suggested by these experiments. Firstly, it is sufficiently compact and light-weight that it seems appropriate for planetary exploration of the electrical properties of atmospheres. Secondly its wide bi polar logarithmic range (~ pA to uA) makes it robust enough to provide useful data despite the environment in which it is deployed being poorly quantified.

  4. Development of High Power Electron Beam Measuring and Analyzing System for Microwave Vacuum Electron Devices (United States)

    Ruan, C. J.; Wu, X. L.; Li, Q. S.; Li, C. S.

    The measurement and analysis of high power electron beam during its formation and transmission are the basic scientific problems and key techniques for the development of high performance microwave vacuum electron devices, which are widely used in the fields of military weapon, microwave system and scientific instruments. In this paper, the dynamic parameters measurement and analysis system being built in Institute of Electronics, Chinese Academy of Sciences (IECAS) recently are introduced. The instrument are designed to determine the cross-section, the current density, and the energy resolution of the high power electron beam during its formation and transmission process, which are available both for the electron gun and the electron optics system respectively. Then the three dimension trajectory images of the electron beam can be rebuilt and display with computer controlled data acquisition and processing system easily. Thus, much more complicated structures are considered and solved completely to achieve its detection and analysis, such as big chamber with 10-6 Pa high vacuum system, the controlled detector movement system in axis direction with distance of 600 mm inside the vacuum chamber, the electron beam energy analysis system with high resolution of 0.5%, and the electron beam cross-section and density detector using the YAG: Ce crystal and CCD imaging system et al. At present, the key parts of the instrument have been finished, the cross-section experiment of the electron beam have been performed successfully. Hereafter, the instrument will be used to measure and analyze the electron beam with the electron gun and electron optics system for the single beam and multiple beam klystron, gyrotron, sheet beam device, and traveling wave tube etc. thoroughly.

  5. Measurement of bubble and pellet size distributions: past and current image analysis technology. (United States)

    Junker, Beth


    Measurements of bubble and pellet size distributions are useful for biochemical process optimizations. The accuracy, representation, and simplicity of these measurements improve when the measurement is performed on-line and in situ rather than off-line using a sample. Historical and currently available measurement systems for photographic methods are summarized for bubble and pellet (morphology) measurement applications. Applications to cells, mycelia, and pellets measurements have driven key technological developments that have been applied for bubble measurements. Measurement trade-offs exist to maximize accuracy, extend range, and attain reasonable cycle times. Mathematical characterization of distributions using standard statistical techniques is straightforward, facilitating data presentation and analysis. For the specific application of bubble size distributions, selected bioreactor operating parameters and physicochemical conditions alter distributions. Empirical relationships have been established in some cases where sufficient data have been collected. In addition, parameters and conditions with substantial effects on bubble size distributions were identified and their relative effects quantified. This information was used to guide required accuracy and precision targets for bubble size distribution measurements from newly developed novel on-line and in situ bubble measurement devices.

  6. A tunneling current density model for ultra thin HfO2 high-k dielectric material based MOS devices (United States)

    Maity, Niladri Pratap; Maity, Reshmi; Thapa, R. K.; Baishya, Srimanta


    In this paper, an analytical model for evaluation of tunneling current density of ultra thin MOS devices is presented. The impacts of the promising high-k dielectric material, HfO2 on the current density model have been carried out. In this work, improvement in the results is brought in by taking into account the barrier height lowering due to the image force effect. The considered voltage range is from 0 to ψ1/e i.e., 0 neglecting the image force effect for a MOS device consisting asymmetric barrier. Later, image force effect of ultra thin oxide layer has been introduced for practical potential barrier by superimposing the potential barrier on the trapezoidal barrier. Theoretical predictions are compared with the results obtained by the 2-D numerical device simulator ATLAS and published experimental results. Excellent agreements among the three are observed.

  7. Device for Measuring Sliding Friction on Highloft Nonwovens

    Directory of Open Access Journals (Sweden)

    Stephen Michielsen


    Full Text Available When measuring the sliding friction on highly compliant materials such as fabric batting and foam rubber, a substantial portion of the apparent friction is due to the deformation of the substrate. A new friction instrument consisting of a sled within a sled has been developed that eliminates the contribution of this deformation and provides the true sliding friction as well as the force required to deform the substrate. The friction coefficient as measured using a conventional steel sled sliding on high loft polyester batts increased as the number of polyester batts increased. Using the new, guarded friction sled, the friction coefficient was independent of the number of supporting batts, thus separating the deformation forces from the sliding forces.

  8. Characterizing heralded single-photon sources with imperfect measurement devices

    Energy Technology Data Exchange (ETDEWEB)

    Razavi, M; Soellner, I; Bocquillon, E; Couteau, C; Laflamme, R; Weihs, G [Institute for Quantum Computing, University of Waterloo, 200 University Ave. W, Waterloo, ON N2L 3G1 (Canada)], E-mail:


    Any characterization of a single-photon source is not complete without specifying its second-order degree of coherence, i.e., its g{sup (2)} function. An accurate measurement of such coherence functions commonly requires high-precision single-photon detectors, in whose absence only time-averaged measurements are possible. It is not clear, however, how the resulting time-averaged quantities can be used to properly characterize the source. In this paper, we investigate this issue for a heralded source of single photons that relies on continuous-wave parametric down-conversion. By accounting for major shortcomings of the source and the detectors-i.e., the multiple-photon emissions of the source, the time resolution of photodetectors and our chosen width of coincidence window-our theory enables us to infer the true source properties from imperfect measurements. Our theoretical results are corroborated by an experimental demonstration using a PPKTP crystal pumped by a blue laser that results in a single-photon generation rate about 1.2 millions per second per milliwatt of pump power. This work takes an important step towards the standardization of such heralded single-photon sources.

  9. Influence of measurement conditions and used devices on consequential creep modulus

    Directory of Open Access Journals (Sweden)

    Reznicek Martin


    Full Text Available This research deals with study of the possibilities of the creep properties measurement on dedicated devices for the creep measurement and on devices, which enable the creep properties measurement. A comparison of these two different measurement methods show the influence of boundary conditions on the measurement result. Simultaneously, the effort to shorten the long-term tests, because of time saving during research and development of new materials, is confronted here. Radiation crosslinking samples of high-density polyethylene (HDPE, which enable the change of the internal structure to the spatial network by the influence of beta radiation, were chosen as an example for comparison.

  10. Osseointegration of metallic devices: current trends based on implant hardware design. (United States)

    Coelho, Paulo G; Jimbo, Ryo


    Osseointegration of metallic devices has been one of the most successful treatments in rehabilitative dentistry and medicine over the past five decades. While highly successful, the quest for designing surgical instrumentation and associated implantable devices that hastens osseointegration has been perpetual and has often been approached as single variable preclinical investigations. The present manuscript presents how the interplay between surgical instrumentation and device macrogeometry not only plays a key role on both early and delayed stages of osseointegration, but may also be key in how efficient smaller length scale designing (at the micrometer and nanometer scale levels) may be in hastening early stages of osseointegration. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. Light collection optics for measuring flux and spectrum from light-emitting devices (United States)

    McCord, Mark A.; DiRegolo, Joseph A.; Gluszczak, Michael R.


    Systems and methods for accurately measuring the luminous flux and color (spectra) from light-emitting devices are disclosed. An integrating sphere may be utilized to directly receive a first portion of light emitted by a light-emitting device through an opening defined on the integrating sphere. A light collector may be utilized to collect a second portion of light emitted by the light-emitting device and direct the second portion of light into the integrating sphere through the opening defined on the integrating sphere. A spectrometer may be utilized to measure at least one property of the first portion and the second portion of light received by the integrating sphere.

  12. Methods and devices used to measure friction in rolling

    DEFF Research Database (Denmark)

    Jeswiet, J.; Arentoft, Mogens; Henningsen, Poul


    Friction at the workpiece-die boundary, in both bulk forming and sheet forming is, arguably, the single most important physical parameter influencing the processing of metals; yet it remains the least understood. Hence there is a need for basic research into metal-die interface mechanisms. To gain...... a good understanding of the mechanisms at the interface and to be able to verify the friction and tribology models that exist, friction sensors are needed. Designing sensors to measure frictional stress in metal working has been pursued by many researchers. This paper surveys methods that have been used...

  13. Smart Technique for Induction Motors Diagnosis by Monitoring the Power Factor Using Only the Measured Current (United States)

    Shnibha, R. A.; Albarabar, A. S.


    This paper is concerned with accurate, early and reliable induction motor IM fault detection and diagnosis using an enhanced power parameter measurement technique. IM protection devices typically monitor the motor current and/or voltage to provide the motor protection from e.g. current overload, over/under voltage, etc. One of the interesting parameters to monitor is the operating power factor (PF) of the IM which provides better under-load protection compared to the motor current based approaches. The PF of the motor is determined by the level of the current and voltage that are drawn, and offers non-intrusive monitoring. Traditionally, PF estimation would require both voltage and the current measurements to apply the displacement method. This paper will use a method of determining the operating PF of the IM using only the measured current and the manufacturer data that are typically available from the nameplate and/or datasheet for IM monitoring. The novelty of this work lies in detecting very low phase imbalance related faults and misalignment. Much of the previous work has dealt with detecting phase imbalance faults at higher degrees of severity, i.e. voltage drops of 10% or more. The technique was tested by empirical measurements on test rig comprised a 1.1 kW variable speed three phase induction motor with varying output load (No load, 25%, 50%, 75% and 100% load). One common faults was introduced; imbalance in one phase as the electrical fault The experimental results demonstrate that the PF can be successfully applied for IM fault diagnosis and the present study shows that severity fault detection using PF is promising. The proposed method offers a potentially reliable, non-intrusive, and inexpensive CM tool which can be implemented with real-time monitoring systems

  14. Electronic control of H+ current in a bioprotonic device with Gramicidin A and Alamethicin (United States)

    Hemmatian, Zahra; Keene, Scott; Josberger, Erik; Miyake, Takeo; Arboleda, Carina; Soto-Rodríguez, Jessica; Baneyx, François; Rolandi, Marco


    In biological systems, intercellular communication is mediated by membrane proteins and ion channels that regulate traffic of ions and small molecules across cell membranes. A bioelectronic device with ion channels that control ionic flow across a supported lipid bilayer (SLB) should therefore be ideal for interfacing with biological systems. Here, we demonstrate a biotic-abiotic bioprotonic device with Pd contacts that regulates proton (H+) flow across an SLB incorporating the ion channels Gramicidin A (gA) and Alamethicin (ALM). We model the device characteristics using the Goldman-Hodgkin-Katz (GHK) solution to the Nernst-Planck equation for transport across the membrane. We derive the permeability for an SLB integrating gA and ALM and demonstrate pH control as a function of applied voltage and membrane permeability. This work opens the door to integrating more complex H+ channels at the Pd contact interface to produce responsive biotic-abiotic devices with increased functionality.

  15. Measurement of scrape-off-layer current dynamics during MHD activity and disruptions in HBT-EP (United States)

    Levesque, J. P.; Brooks, J. W.; Abler, M. C.; Bialek, J.; Byrne, P. J.; Hansen, C. J.; Hughes, P. E.; Mauel, M. E.; Navratil, G. A.; Rhodes, D. J.


    We report scrape-off layer (SOL) current measurements during magnetohydrodynamic (MHD) mode activity, resonant magnetic perturbations (RMPs), and disruptions in the High Beta Tokamak—Extended Pulse (HBT-EP) device. Currents are measured via segmented plasma current Rogowski coils, jumpers running toroidally between otherwise-isolated vessel sections, and a grounded electrode in the scrape-off layer. These currents strongly depend on the plasma’s major radius, and amplitude and phase of non-axisymmetric field components. SOL currents connecting through the vessel are seen to reach  ∼0.2{--}0.5 % of the plasma current during typical kink activity and RMPs. Plasma current asymmetries and scrape-off-layer currents generated during disruptions, which are commonly called halo currents, reach  ∼4 % of I p. Asymmetric toroidal currents between vessel sections rotate at tens of kHz through most of the current quench, then symmetrize once I p reaches  ∼30 % of its pre-disruptive value. Toroidal jumper currents oscillate between co- and counter-I p, with co-I p being dominant on average during disruptions. A relative increase in local plasma current measured by a segmented I p Rogowski coil correlates with counter-I p current in the nearest toroidal jumper. Measurements are interpreted in the context of two models that produce contrary predictions for the toroidal vessel current polarity during disruptions. Plasma current asymmetry measurements are consistent with both models, and SOL currents scale with plasma displacement toward the vessel wall. The design of an upcoming SOL current diagnostic and control upgrade is also briefly presented.

  16. Waveform measurement in mocrowave device characterization: impact on power amplifiers design

    Directory of Open Access Journals (Sweden)

    Roberto Quaglia


    Full Text Available This paper describes an example of a measurement setup enabling waveform measurements during the load-pull characterization of a microwave power device. The significance of this measurement feature is highlighted showing how waveform engineering can be exploited to design high efficiency microwave power amplifiers.

  17. Measurement of charm in charged current at HERA

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, Tobias


    A measurement of charm production in charged current (CC) polarized electron-proton deep inelastic scattering processes with data from the H1 detector at the HERA collider is presented. This process in principle allows access to the strange quark density in the proton. In total 5460 CC candidate events in e{sup +}p and 6253 in e{sup -}p data are selected in the kinematic range Q{sup 2}>223 GeV{sup 2} and 0.03measured CC cross sections are {sigma}{sub CC}=(28.9{+-} 1.4)+P{sub e}.(28.6{+-}4.7) pb for e{sup +}p and {sigma}{sub CC}=(49.2{+-}2.3)-P{sub e}.(42.5 {+-}6.8) pb for e{sup -}p, where P{sub e} is the lepton beam polarization. While the measured cross section for e{sup +}p data is in agreement with the theoretical prediction, the cross section for e{sup -}p data shows a weaker dependence on P{sub e} than predicted. The charm fractions in the selected CC candidate event samples are extracted using the muon charge asymmetry. Muons originating from charmed hadron decays in CC events at HERA always have the same charge as the beam lepton. The extracted charm fractions in the selected CC candidate event samples are F{sub c}=9.5{+-}8.9{+-}3.0 % for e{sup +}p and F{sub c}=4.4{+-}6.9{+-}2.6 % for e{sup -}p. Due to the large statistical errors of the measured charm fractions, the strange quark density in the proton has not been extracted. (orig.)

  18. Comparison of Minority Carrier Lifetime Measurements in Superstrate and Substrate CdTe PV Devices: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Gessert, T. A.; Dhere, R. G.; Duenow, J. N.; Kuciauskas, D.; Kanevce, A.; Bergeson, J. D.


    We discuss typical and alternative procedures to analyze time-resolved photoluminescence (TRPL) measurements of minority carrier lifetime (MCL) with the hope of enhancing our understanding of how this technique may be used to better analyze CdTe photovoltaic (PV) device functionality. Historically, TRPL measurements of the fast recombination rate (t1) have provided insightful correlation with broad device functionality. However, we have more recently found that t1 does not correlate as well with smaller changes in device performance, nor does it correlate well with performance differences observed between superstrate and substrate CdTe PV devices. This study presents TRPL data for both superstrate and substrate CdTe devices where both t1 and the slower TRPL decay (t2) are analyzed. The study shows that changes in performance expected from small changes in device processing may correlate better with t2. Numerical modeling further suggests that, for devices that are expected to have similar drift field in the depletion region, effects of changes in bulk MCL and interface recombination should be more pronounced in t2. Although this technique may provide future guidance to improving CdS/CdTe device performance, it is often difficult to extract statistically precise values for t2, and therefore t2 data may demonstrate significant scatter when correlated with performance parameters.

  19. Experimental arrangement to measure dispersion in optical fiber devices

    Energy Technology Data Exchange (ETDEWEB)

    Armas Rivera, Ivan [Benemerita Universidad Autonoma de Puebla, Facultad de Ciencias de la Electronica (Mexico); Beltran Perez, Georgina; Castillo Mixcoatl, Juan; Munoz Aguirre, Severino [Benemerita Universidad Autonoma de Puebla, Facultad de Ciencias Fisico Matematicas (Mexico); Zaca Moran, Placido, E-mail: [Benemerita Universidad Autonoma de Puebla, Fisicoquimica de Materiales ICUAP (Mexico)


    Dispersion is a quite important parameter in systems based on optical fiber, especially in pulsed emission lasers, where the temporal width is affected by such parameter. Therefore, it is necessary to consider the dispersion provoked by each component in the cavity. There are various experimental interferometric arrangements to evaluate this parameter. Generally, these systems modify the wavelength to obtain information about the n({lambda}) dependency, which is contained in the interferogram phase. However, this makes the system quite slow and it requires tunable and narrow bandwidth laser sources. In the present work, results obtained from an arrangement based on Mach-Zehnder interferometer where one of the arms is the optical fiber under study, while the reference one is air, are presented. In order to determine the n({lambda}) dependency, a wide spectrum light source was used in the wavelength range of interest. The phase information was evaluated from the interferometric signal measured by an optical spectrum analyzer.

  20. The TESS camera: modeling and measurements with deep depletion devices (United States)

    Woods, Deborah F.; Vanderspek, Roland; MacDonald, Robert; Morgan, Edward; Villasenor, Joel; Thayer, Carolyn; Burke, Barry; Chesbrough, Christian; Chrisp, Michael; Clark, Kristin; Furesz, Gabor; Gonzales, Alexandria; Nguyen, Tam; Prigozhin, Gregory; Primeau, Brian; Ricker, George; Sauerwein, Timothy; Suntharalingam, Vyshnavi


    The Transiting Exoplanet Survey Satellite, a NASA Explorer-class mission in development, will discover planets around nearby stars, most notably Earth-like planets with potential for follow up characterization. The all-sky survey requires a suite of four wide field-of-view cameras with sensitivity across a broad spectrum. Deep depletion CCDs with a silicon layer of 100 μm thickness serve as the camera detectors, providing enhanced performance in the red wavelengths for sensitivity to cooler stars. The performance of the camera is critical for the mission objectives, with both the optical system and the CCD detectors contributing to the realized image quality. Expectations for image quality are studied using a combination of optical ray tracing in Zemax and simulations in Matlab to account for the interaction of the incoming photons with the 100 μm silicon layer. The simulations include a probabilistic model to determine the depth of travel in the silicon before the photons are converted to photo-electrons, and a Monte Carlo approach to charge diffusion. The charge diffusion model varies with the remaining depth for the photo-electron to traverse and the strength of the intermediate electric field. The simulations are compared with laboratory measurements acquired by an engineering unit camera with the TESS optical design and deep depletion CCDs. In this paper we describe the performance simulations and the corresponding measurements taken with the engineering unit camera, and discuss where the models agree well in predicted trends and where there are differences compared to observations.

  1. Current status of percutaneous right ventricular assist devices: First-in-man use of a novel dual lumen cannula. (United States)

    Aggarwal, Vikas; Einhorn, Bryce N; Cohen, Howard A


    Ventricular assist devices have become an accepted therapeutic solution for patients with severe left ventricular dysfunction when pharmacology fails to maintain sufficient cardiac output. Despite various technologies that have allowed left ventricular assist devices to become more reliable and versatile in the past decade, comparatively little attention has been applied to right heart assistance which is still in the early stage of its development. The extracorporeal devices developed thus far have been associated with mobility issues and complications common to ventricular assist devices in general, such as infection, bleeding, and thromboembolism. Designed to obviate the problems previously experienced by other right ventricle (RV)-focused devices, the Protek Duo (CardiacAssist, Pittsburgh, PA) is a novel, fully percutaneous, dual lumen cannula for RV support used in conjunction with the paracorporeal TandemHeart(®) (CardiacAssist, Pittsburgh, PA) pump. We describe our initial experience with the Protek Duo cannula in two different clinical scenarios. In addition, we summarize the current percutaneous mechanical support technology for RV assistance and propose modification of current technology to facilitate its application. © 2016 Wiley Periodicals, Inc.

  2. Measuring steps with the Fitbit activity tracker: an inter-device reliability study. (United States)

    Dontje, Manon L; de Groot, Martijn; Lengton, Remko R; van der Schans, Cees P; Krijnen, Wim P


    Activity trackers like Fitbit are used for self-tracking of physical activity by an increasing number of individuals. Comparing physical activity scores with peers can contribute to the desired behavioural change. However, for meaningful social comparison a high inter-device reliability is paramount. This study aimed to determine the inter-device reliability of Fitbit activity trackers in measuring steps. Ten activity trackers (Fitbit Ultra) were worn by a single person (male, 46 years) during eight consecutive days. Inter-device reliability was assessed on three different levels of aggregation (minutes, hours, days) with various methods, including intra-class correlation coefficient (ICC), Bland-Altman plots, limits of agreement (LOA) and Mixed Model Analysis. Results showed that the inter-device reliability of the Fitbit in measuring steps is good at all levels of aggregation (minutes, hours, days), but especially when steps were measured per day. This implies that individuals can reliably compare their daily physical activity scores with peers.

  3. Study on DeviceNet communication mechanism and its application in protection measurement and control system

    Institute of Scientific and Technical Information of China (English)

    Tong Weiming; Li Zhongwei; Sun Fanjin; Cheng Shukang


    To fit in with the developing requirement of integrated functions of protection measurement, control and communication of protective relays,a protection measurement and control system based on DeviceNet fieldbus is designed.The communication mechanism of DeviceNet is studied and data trigger modes.communication connection,message types and other key technologies are analyzed.The object modeling and device description of the device are realized too.Results of network test,dynamic simulation and test in the field indicate that this system can accomplish all the communication tasks in real time and can make precise response to every kind of faults of the motor,transformer,line and capacitor.Moreover,this system has higher measurement precision and better control capability.

  4. History and current safety measures at Laguna Palcacocha, Huaraz, Peru (United States)

    Salazar Checa, César; Cochachin, Alejo; Frey, Holger; Huggel, Christian; Portocarrero, César


    Laguna Palcacocha is a large glacier lake in the Cordillera Blanca, Peru, located in the Quillcay catchment, above the city of Huaraz, the local capital. On 13 December 1941, the moraine dam lake collapsed, probably after having been impacted by a large ice avalanche, and triggered a major outburst flood. This GLOF destroyed about a third of the city of Huaraz, causing about 2,000 casualties and is therefore one of the deadliest glacier lake outbursts known in history. In 1974, the Glaciology Unit of Peru, responsible for the studying, monitoring and mitigation works related to glacier hazards installed a reinforcement of the natural moraine dam of the newly filled Laguna Palcacocha, with an artificial drainage channel at 7 m below the crest of the reinforced dam. At that time, the lake had an area of 66,800 m2 and a volume of 0.5 x 106 m3. During the past decades, in the course of continued glacier retreat, Laguna Palcacocha has undergone an extreme growth. In February 2016, the lake had an area of 514,000 m2 (7.7 times the area of 1974) and a volume of more than 17 x 106 m3 (more than 34 times the volume of 1974). At the same time, the city of Huaraz, located 20 km downstream of the lake, grew significantly after its almost complete destruction by the 1970 earthquake. Today, about 120,000 people are living in the city. Due to the persisting possibility for large ice avalanches directly above the Palcacocha lake, this constitutes a high-risk situation, requiring new hazard and risk mitigation measures. As an immediate temporal measure, in order to bridge the time until the realization of a more permanent measure, a syphoning system has been installed in 2011, using about ten 700-m pipes with a 10-inch (25.4 cm) diameter. The aim of this syphoning attempt is to lower the lake level by about 7 m, and therefore reduce the lake volume on the one hand, and also reach a higher dam freeboard. However, the system is less effective than assumed, currently the lake level

  5. Study of lower hybrid current drive system in tokamak fusion devices

    Energy Technology Data Exchange (ETDEWEB)

    Maebara, Sunao [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment


    This report describes R and D of a high-power klystron, RF vacuum window, low-outgassing antenna and a front module for a plasma-facing antenna aiming the 5 GHz Lower Hybrid Current Drive (LHCD) system for the next Tokamak Fusion Device. 5 GHz klystron with a low-perveances of 0.7 {mu}P is designed for a high-power and a high-efficiency, the output-power of 715 kW and the efficiency of 63%, which are beyond the conventional design scaling of 450 kW-45%, are performed using the prototype klystron which operates at the pulse duration of 15 {mu}sec. A new pillbox window, which has an oversized length in both the axial and the radial direction, are designed to reduce the RF power density and the electric field strength at the ceramics. It is evaluated that the power capability by cooling edge of ceramics is 1 MW with continuous-wave operation. The antenna module using Dispersion Strengthened Copper which combines high mechanical property up to 500degC with high thermal conductivity, are developed for a low-outgassing antenna in a steady state operation. It is found that the outgassing rate is in the lower range of 4x10{sup -6} Pam{sup 3}/sm{sup 2} at the module temperature of 300degC, which requires no active vacuum pumping of the LHCD antenna. A front module using Carbon Fiber Composite (CFC) are fabricated and tested for a plasma facing antenna which has a high heat-resistive. Stationary operation of the CFC module with water cooling is performed at the RF power of 46 MWm{sup -2} (about 2 times higher than the design value) during 1000 sec, it is found that the outgassing rate is less than 10{sup -5} Pam{sup 3}/sm{sup 2} which is low enough for an antenna material. (author)

  6. Acoustical measurements of expression devices in pipe organs. (United States)

    Braasch, Jonas


    In this investigation, three different swell systems known in pipe organs, the swell box, the crescendo wheel, and the historic wind swell were measured and compared to each other. The dynamic range of the crescendo wheel was found to be most effective, and for frequencies near 2 kHz the increase in sound pressure level could be up to 50 dB between the softest and the loudest adjustment. The maximum dynamic range for the wind swell and the swell box were found to be 10-20 dB in the same frequency range. With its step-wise crescendo procedure, the crescendo wheel simulates the type of orchestra crescendo which is reached by successively adding further musical instruments. In contrast, the swell box and the wind swell produce a crescendo effect similar to the crescendo in which individual musical instruments perform a dynamic movement. This type of crescendo requires a continuous level increase but allows a smaller dynamic range. The disappearance of the wind swell is not surprising because it offers no advantage over the swell box, while being restricted to stops with free reeds.



    G. Trapashko


    Development of microelectronics requires solution of the problem ensuring unity of linear measurements in a submicron range. The problem can be solved on the condition that calibration of measuring devices shall be made in accordance with reference samples that is a short length scale.While making calibration of measuring equipment with the help of a reference measure it is important to investigate components of the method accuracy and their influence on measuring results. The paper considers...

  8. Electromagnetic modelling of current flow in the heart from TASER devices and the risk of cardiac dysrhythmias

    Energy Technology Data Exchange (ETDEWEB)

    Holden, S J [Defence Science and Technology Laboratory, Porton Down, Salisbury, Wiltshire SP4 0JQ (United Kingdom); Sheridan, R D [Defence Science and Technology Laboratory, Porton Down, Salisbury, Wiltshire SP4 0JQ (United Kingdom); Coffey, T J [Mathshop Ltd, Porton Down Science Park, Salisbury, Wiltshire SP4 0JQ (United Kingdom); Scaramuzza, R A [Flomerics Ltd, Electromagnetic Division, TLM House, Percy Street, Nottingham NG16 3EP (United Kingdom); Diamantopoulos, P [Bio-Medical Modelling Unit, School of Engineering, University of Sussex, Falmer, Sussex BN1 9QT (United Kingdom)


    Increasing use by law enforcement agencies of the M26 and X26 TASER electrical incapacitation devices has raised concerns about the arrhythmogenic potential of these weapons. Using a numerical phantom constructed from medical images of the human body in which the material properties of the tissues are represented, computational electromagnetic modelling has been used to predict the currents arising at the heart following injection of M26 and X26 waveforms at the anterior surface of the chest (with one TASER 'barb' directly overlying the ventricles). The modelling indicated that the peak absolute current densities at the ventricles were 0.66 and 0.11 mA mm{sup -2} for the M26 and X26 waveforms, respectively. When applied during the vulnerable period to the ventricular epicardial surface of guinea-pig isolated hearts, the M26 and X26 waveforms induced ectopic beats, but only at current densities greater than 60-fold those predicted by the modelling. When applied to the ventricles in trains designed to mimic the discharge patterns of the TASER devices, neither waveform induced ventricular fibrillation at peak currents >70-fold (for the M26 waveform) and >240-fold (for the X26) higher than the modelled current densities. This study provides evidence for a lack of arrhythmogenic action of the M26 and X26 TASER devices.

  9. Thin and flexible Ni-P based current collectors developed by electroless deposition for energy storage devices (United States)

    Wu, Haoran; Susanto, Amelia; Lian, Keryn


    A PET film metalized by electroless nickel deposition was demonstrated as thin and flexible current collector for energy storage devices. The resultant nickel-on-PET film (Ni-PET) can be used both as current collector for electrochemical capacitors and as electrode for thin film batteries. The composition of Ni-PET was characterized by EDX and XPS. The electrochemical performance of the Ni-PET current collector was similar to Ni foil but with less hydrogen evolution at low potential. The Ni-PET film exhibited better flexibility than a metallic Ni foil. Carbon nanotubes were coated on a Ni-PET substrate to form an electrochemical capacitor electrode which exhibited high chemical stability in both liquid and solid electrolytes, showing strong promise for solid energy storage devices.

  10. Determination of the electronics transfer function for current transient measurements

    CERN Document Server

    Scharf, Christian


    We describe a straight-forward method for determining the transfer function of the readout of a sensor for the situation in which the current transient of the sensor can be precisely simulated. The method relies on the convolution theorem of Fourier transforms. The specific example is a planar silicon pad diode connected with a 50 $\\Omega $ cable to an amplifier followed by a 5 GS/s sampling oscilloscope. The charge carriers in the sensor were produced by picosecond lasers with light of wavelengths of 675 and 1060 nm. The transfer function is determined from the 1060 nm data with the pad diode biased at 1000 V. It is shown that the simulated sensor response convoluted with this transfer function provides an excellent description of the measured transients for the laser light of both wavelengths, at voltages 50 V above the depletion voltage of about 90 V up to the maximum applied voltage of 1000 V. The method has been developed for the precise measurement of the dependence of the drift velocity of electrons an...

  11. Direct current force sensing device based on compressive spring, permanent magnet, and coil-wound magnetostrictive/piezoelectric laminate. (United States)

    Leung, Chung Ming; Or, Siu Wing; Ho, S L


    A force sensing device capable of sensing dc (or static) compressive forces is developed based on a NAS106N stainless steel compressive spring, a sintered NdFeB permanent magnet, and a coil-wound Tb(0.3)Dy(0.7)Fe(1.92)/Pb(Zr, Ti)O3 magnetostrictive∕piezoelectric laminate. The dc compressive force sensing in the device is evaluated theoretically and experimentally and is found to originate from a unique force-induced, position-dependent, current-driven dc magnetoelectric effect. The sensitivity of the device can be increased by increasing the spring constant of the compressive spring, the size of the permanent magnet, and/or the driving current for the coil-wound laminate. Devices of low-force (20 N) and high-force (200 N) types, showing high output voltages of 262 and 128 mV peak, respectively, are demonstrated at a low driving current of 100 mA peak by using different combinations of compressive spring and permanent magnet.

  12. Comparison of arterial blood pressure measurements and hypertension scores obtained by use of three indirect measurement devices in hospitalized dogs. (United States)

    Wernick, Morena B; Höpfner, Robert M; Francey, Thierry; Howard, Judith


    To evaluate the agreement of blood pressure measurements and hypertension scores obtained by use of 3 indirect arterial blood pressure measurement devices in hospitalized dogs. Design-Diagnostic test evaluation. 29 client-owned dogs. 5 to 7 consecutive blood pressure readings were obtained from each dog on each of 3 occasions with a Doppler ultrasonic flow detector, a standard oscillometric device (STO), and a high-definition oscillometric device (HDO). When the individual sets of 5 to 7 readings were evaluated, the coefficient of variation for systolic arterial blood pressure (SAP) exceeded 20% for 0% (Doppler), 11 % (STO), and 28% (HDO) of the sets of readings. After readings that exceeded a 20% coefficient of variation were discarded, repeatability was within 25 (Doppler), 37 (STO), and 39 (HDO) mm Hg for SAP. Correlation of mean values among the devices was between 0.47 and 0.63. Compared with Doppler readings, STO underestimated and HDO overestimated SAP. Limits of agreement between mean readings of any 2 devices were wide. With the hypertension scale used to score SAP, the intraclass correlation of scores was 0.48. Linear-weighted inter-rater reliability between scores was 0.40 (Doppler vs STO), 0.38 (Doppler vs HDO), and 0.29 (STO vs HDO). Results of this study suggested that no meaningful clinical comparison can be made between blood pressure readings obtained from the same dog with different indirect blood pressure measurement devices.

  13. Rotational knee laxity: Reliability of a simple measurement device in vivo

    Directory of Open Access Journals (Sweden)

    Zantop Thore


    Full Text Available Abstract Background Double bundle ACL reconstruction has been demonstrated to decrease rotational knee laxity. However, there is no simple, commercially-available device to measure knee rotation. The investigators developed a simple, non-invasive device to measure knee rotation. In conjunction with a rigid boot to rotate the tibia and a force/moment sensor to allow precise determination of torque about the knee, a magnetic tracking system measures the axial rotation of the tibia with respect to the femur. This device has been shown to have acceptable levels of test re-test reliability to measure knee rotation in cadaveric knees. Methods The objective of this study was to determine reliability of the device in measuring knee rotation of human subjects. Specifically, the intra-tester reliability within a single testing session, test-retest reliability between two testing sessions, and inter-tester reliability were assessed for 11 male subjects with normal knees. Results The 95% confidence interval for rotation was less than 5° for intra-tester, test-retest, and inter-tester reliability, and the standard error of measurement for the differences between left and right knees was found to be less than 3°. Conclusion It was found that the knee rotation measurements obtained with this device have acceptable limits of reliability for clinical use and interpretation.

  14. [Regulatory Program for Medical Devices in Cuba: experiences and current challenges]. (United States)

    Pereira, Dulce María Martínez; Rodríguez, Yadira Álvarez; Valdés, Yamila Cedeño; Ribas, Silvia Delgado


    Regulatory control of medical devices in Cuba is conducted through a system based on the Regulatory Program for Medical Devices as a way to ensure the safety, efficacy, and effectiveness of these technologies, which are in use by the National Health System. This program was launched in 1992, when the Regulations for State Evaluation and Registration of Medical Devices were approved. Its successive stages and the merging of regulatory activities for drugs and medical equipment have meant progress toward stronger, more transparent strategies and greater control of industry and the National Health System. Throughout its course the Cuban program has met with challenges and difficulties that it has addressed by drawing on its own experiences. During the new period, the greatest challenges revolve around ensuring that regulatory systems incorporate scientific evaluation, risk levels, maximum rigor through the use of technical standards, and the implementation of international recommendations, together with the application of the ISO 13485 certification scheme, enhanced market monitoring, and classification of medical devices in accordance with their relevance to the country's national health policies. From the regional standpoint, the greatest challenge lies in working toward regulatory convergence. The Collaborating Centre for the Regulation of Health Technologies will support the proposed regulatory strategy and established regional priorities, in particular in connection with the implementation of actions involving medical devices.

  15. Current devices for high-performance whole-body hyperthermia therapy. (United States)

    Jia, Dewei; Liu, Jing


    For late-stage cancer, whole-body hyperthermia (WBH) is highly regarded by physicians as a promising alternative to conventional therapies. Although WBH is still under scrutiny due to potential toxicity, its benefits are incomparable, as diversified devices and very promising treatment protocols in this area are advanced into Phase II and III clinical trials. Following the introduction of the WBH principle, this paper comprehensively reviews the state-of-art high-performance WBH devices based on the heat induction mechanisms - radiation, convection and conduction. Through analyzing each category's physical principle and heat-induction property, the advantages and disadvantages of the devices are evaluated. Technical strategies and critical scientific issues are summarized. For future developments, research directions worth pursuing are presented in this article.

  16. Design and preliminary evaluation of a portable device for the measurement of bioimpedance spectroscopy. (United States)

    Yang, Yuxiang; Wang, Jue; Yu, Gang; Niu, Feilong; He, Ping


    Portable bioimpedance spectroscopy (BIS) devices are of great value for monitoring the pathological status of biological tissues in clinical and home environments. The two traditional techniques for measuring complex bioimpedance, the bridge method and quadrature demodulation method, are either time-consuming or often associated with high cost, high power consumption, and large board space, and therefore are not ideally suitable for designing a portable device for BIS measurement. This paper describes a novel design of a portable BIS device based on the magnitude-ratio and phase-difference detection method and its implementation using the newest generation of analog electronic products which greatly decrease the complexity of both hardware and software. In order to improve the accuracy of the device, a three-reference calibration algorithm was applied. Experimental sweep-frequency measurements on RC circuits were carried out to preliminarily evaluate the performances of the device. The results obtained by the device were found to be in good agreement with the results measured by a commercial impedance analyzer HP4194, with an overall mean error of 0.014% in magnitude and 0.136 degrees in phase over a frequency range of 20 kHz to 1 MHz.

  17. Measuring Visual Function Using the MultiQuity System: Comparison with an Established Device

    Directory of Open Access Journals (Sweden)

    Patrycja Smolarek-Kasprzak


    Full Text Available Purpose. To compare measures of visual acuity (VA and contrast sensitivity (CS from the Thompson Xpert 2000 and MultiQuity (MiQ devices. Methods. Corrected distance VA (CDVA and CS were measured in the right eye of 73 subjects, on an established system (Thompson Xpert and a novel system (MiQ 720. Regression was used to convert MiQ scores into the Thompson scale. Agreement between the converted MiQ and Thompson scores was investigated using standard agreement indices. Test-retest variability for both devices was also investigated, for a separate sample of 24 subjects. Results. For CDVA, agreement was strong between the MiQ and Thomson devices (accuracy = 0.993, precision = 0.889, CCC = 0.883. For CS, agreement was also strong (accuracy = 0.996, precision = 0.911, CCC = 0.907. Agreement was unaffected by demographic variables or by presence/absence of ocular pathology. Test-retest agreement indices for both devices were excellent: in the range 0.88–0.96 for CDVA and in the range 0.90–0.98 for CS. Conclusion. MiQ measurements exhibit strong agreement with corresponding Thomson measurements, and test-retest results are good for both devices. Agreement between the two devices is unaffected by age or ocular pathology.

  18. Access to hands-on mathematics measurement activities using robots controlled via speech generating devices: three case studies. (United States)

    Adams, Kim; Cook, Al


    To examine how using a robot controlled via a speech generating device (SGD) influences the ways students with physical and communication limitations can demonstrate their knowledge in math measurement activities. Three children with severe physical disabilities and complex communication needs used the robot and SGD system to perform four math measurement lessons in comparing, sorting and ordering objects. The performance of the participants was measured and the process of using the system was described in terms of manipulation and communication events. Stakeholder opinions were solicited regarding robot use. Robot use revealed some gaps in the procedural knowledge of the participants. Access to both the robot and SGD was shown to provide several benefits. Stakeholders thought the intervention was important and feasible for a classroom environment. The participants were able to participate actively in the hands-on and communicative measurement activities and thus meet the demands of current math instruction methods. Current mathematics pedagogy encourages doing hands-on activities while communicating about concepts. Adapted Lego robots enabled children with severe physical disabilities to perform hands-on length measurement activities. Controlling the robots from speech generating devices (SGD) enabled the children, who also had complex communication needs, to reflect and report on results during the activities. By using the robots combined with SGDs, children both exhibited their knowledge of and experienced the concepts of mathematical measurements.

  19. Concordance of adherence measurement using self-reported adherence questionnaires and medication monitoring devices. (United States)

    Shi, Lizheng; Liu, Jinan; Koleva, Yordanka; Fonseca, Vivian; Kalsekar, Anupama; Pawaskar, Manjiri


    The primary objective of this review was to identify and examine the literature on the association between medication adherence self-reported questionnaires (SRQs) and medication monitoring devices. The primary literature search was performed for 1980-2009 using PubMed, PubMed In Process and Non-Indexed, Ovid MEDLINE, Ovid MEDLINE In-Process, PsycINFO (EBSCO), CINAHL (EBSCO), Ovid HealthStar, EMBASE (Elsevier) and Cochrane Databases and using the following search terms: 'patient compliance', 'medication adherence', 'treatment compliance', 'drug monitoring', 'drug therapy', 'electronic', 'digital', 'computer', 'monitor', 'monitoring', 'drug', 'drugs', 'pharmaceutical preparations', 'compliance' and 'medications'. We identified studies that included SRQs and electronic monitoring devices to measure adherence and focused on the SRQs that were found to be moderately to highly correlated with the monitoring devices. Of the 1679 citations found via the primary search, 41 full-text articles were reviewed for correlation between monitoring devices and SRQs. A majority (68%) of articles reported high (27%), moderate (29%) or significant (12%) correlation between monitoring devices (37 using Medication Event Monitoring System [MEMS®] and four using other devices) and SRQs (11 identified and numerous other unnamed SRQs). The most commonly used SRQs were the Adult/Pediatric AIDS Clinical Trial Group (AACTG/PACTG; 24.4%, 10/41) followed by the 4-item Morisky (9.8%, 4/41), Brief Medication Questionnaire (9.8%, 4/41) and visual analogue scale (VAS; 7.3%, 3/41). Although study designs differed across the articles, SRQs appeared to report a higher rate of medication adherence (+14.9%) than monitoring devices. In conclusion, several medication adherence SRQs were validated using electronic monitoring devices. A majority of them showed high or moderate correlation with medication adherence measured using monitoring devices, and could be considered for measuring patient

  20. Quantitative Electrochemical Measurements using in situ ec-S/TEM Devices

    Energy Technology Data Exchange (ETDEWEB)

    Unocic, Raymond R [ORNL; Sacci, Robert L [ORNL; Brown, Gilbert M [ORNL; Veith, Gabriel M [ORNL; Dudney, Nancy J [ORNL; More, Karren Leslie [ORNL; Gardiner, Daniel [Protochips Inc., Raleigh, NC; Walden II, Franklin S [Protochips Inc., Raleigh, NC; Damiano, John [Protochips Inc., Raleigh, NC; Nackashi, David P. [Protochips Inc., Raleigh, NC


    Insight into dynamic electrochemical processes can be obtained with in situ ec-S/TEM, which utilizes microfluidic electrochemical cells to characterize electrochemical processes with S/TEM imaging, diffraction or spectroscopy. The microfluidic electrochemical cell is composed of microfabricated devices with glassy carbon and platinum microband electrodes in a three-electrode cell configuration. To establish the validity of this method for quantitative in situ electrochemistry research, cyclic voltammetry, choronoamperometry and electrochemical impedance spectroscopy were performed using a standard one electron transfer redox couple using a [Fe(CN)6]3-/4- based electrolyte. Established relationships of the electrode geometry and microfluidic conditions were fitted with cyclic voltammetry and chronoamperometic measurements of analyte diffusion coefficients and was found to agree with well-accepted values that are on the order of 10-5 cm2 s-1. Influence of the electron beam on electrochemical measurements was found to be negligible during CV scans where the current profile varied only within a few nA with the electron beam on and off which is well within the hysteresis between multiple CV scans. The combination of experimental results provides a validation that quantitative electrochemistry experiments can be performed with these small-scale microfluidic electrochemical cells provided that accurate geometrical electrode configurations, diffusion boundary layers and microfluidic conditions are accounted for.

  1. Quantitative electrochemical measurements using in situ ec-S/TEM devices. (United States)

    Unocic, Raymond R; Sacci, Robert L; Brown, Gilbert M; Veith, Gabriel M; Dudney, Nancy J; More, Karren L; Walden, Franklin S; Gardiner, Daniel S; Damiano, John; Nackashi, David P


    Insight into dynamic electrochemical processes can be obtained with in situ electrochemical-scanning/transmission electron microscopy (ec-S/TEM), a technique that utilizes microfluidic electrochemical cells to characterize electrochemical processes with S/TEM imaging, diffraction, or spectroscopy. The microfluidic electrochemical cell is composed of microfabricated devices with glassy carbon and platinum microband electrodes in a three-electrode cell configuration. To establish the validity of this method for quantitative in situ electrochemistry research, cyclic voltammetry (CV), choronoamperometry (CA), and electrochemical impedance spectroscopy (EIS) were performed using a standard one electron transfer redox couple [Fe(CN)6]3-/4--based electrolyte. Established relationships of the electrode geometry and microfluidic conditions were fitted with CV and chronoamperometic measurements of analyte diffusion coefficients and were found to agree with well-accepted values that are on the order of 10-5 cm2/s. Influence of the electron beam on electrochemical measurements was found to be negligible during CV scans where the current profile varied only within a few nA with the electron beam on and off, which is well within the hysteresis between multiple CV scans. The combination of experimental results provides a validation that quantitative electrochemistry experiments can be performed with these small-scale microfluidic electrochemical cells provided that accurate geometrical electrode configurations, diffusion boundary layers, and microfluidic conditions are accounted for.

  2. An industrial radiography exposure device based on measurement of transmitted gamma-ray intensity (United States)

    Polee, C.; Chankow, N.; Srisatit, S.; Thong-Aram, D.


    In film radiography, underexposure and overexposure may happen particularly when lacking information of specimen material and hollowness. This paper describes a method and a device for determining exposure in industrial gamma-ray radiography based on quick measurement of transmitted gamma-ray intensity with a small detector. Application software was developed for Android mobile phone to remotely control the device and to display counting data via Bluetooth communication. Prior to film exposure, the device is placed behind a specimen to measure transmitted intensity which is inversely proportional to the exposure. Unlike in using the conventional exposure curve, correction factors for source decay, source-to- film distance, specimen thickness and kind of material are not needed. The developed technique and device make radiographic process economic, convenient and more reliable.

  3. Implantable optogenetic device with CMOS IC technology for simultaneous optical measurement and stimulation (United States)

    Haruta, Makito; Kamiyama, Naoya; Nakajima, Shun; Motoyama, Mayumi; Kawahara, Mamiko; Ohta, Yasumi; Yamasaki, Atsushi; Takehara, Hiroaki; Noda, Toshihiko; Sasagawa, Kiyotaka; Ishikawa, Yasuyuki; Tokuda, Takashi; Hashimoto, Hitoshi; Ohta, Jun


    In this study, we have developed an implantable optogenetic device that can measure and stimulate neurons by an optical method based on CMOS IC technology. The device consist of a blue LED array for optically patterned stimulation, a CMOS image sensor for acquiring brain surface image, and eight green LEDs surrounding the CMOS image sensor for illumination. The blue LED array is placed on the CMOS image sensor. We implanted the device in the brain of a genetically modified mouse and successfully demonstrated the stimulation of neurons optically and simultaneously acquire intrinsic optical images of the brain surface using the image sensor. The integrated device can be used for simultaneously measuring and controlling neuronal activities in a living animal, which is important for the artificial control of brain functions.

  4. Development of a Wearable Device for Motion Capturing Based on Magnetic and Inertial Measurement Units

    Directory of Open Access Journals (Sweden)

    Bin Fang


    Full Text Available This paper presents a novel wearable device for gesture capturing based on inertial and magnetic measurement units that are made up of micromachined gyroscopes, accelerometers, and magnetometers. The low-cost inertial and magnetic measurement unit is compact and small enough to wear and there are altogether thirty-six units integrated in the device. The device is composed of two symmetric parts, and either the right part or the left one contains eighteen units covering all the segments of the arm, palm, and fingers. The offline calibration and online calibration are proposed to improve the accuracy of sensors. Multiple quaternion-based extended Kalman filters are designed to estimate the absolute orientations, and kinematic models of the arm-hand are considered to determine the relative orientations. Furthermore, position algorithm is deduced to compute the positions of corresponding joint. Finally, several experiments are implemented to verify the effectiveness of the proposed wearable device.

  5. The medical device industry and the biomedical engineer: current status and future trends. (United States)

    Farley, B E


    The role of new and existing technology in the development of medical devices is examined. The impact of competition and economic and regulatory pressures is assessed. The identification of clinical needs is discussed. These include the needs to reduce liability, find less invasive alternatives to surgery, improve the quality of life, and prevent disease. Career opportunities are considered in some detail.

  6. A new device designed for direct yield stress measurements of cement spacer

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, C.L.; Tonmukayakul, P.; Morgan, R.L. [Halliburton Energy Services, Houston, TX (United States)


    The rheological properties of spacer fluids and cement slurries have a significant impact on the hydraulic shear stress of well casing walls. This paper described experimental studies and numerical models of a device designed to measure the yield stress and rheological properties of spacer and cement samples. The device was designed using the Couette principle for rheological measurements, and measured the yield stress of particle-laden samples between 4 and 150 degrees C. A sample contained in a gap between a stator and a blade located along the inside wall of a steel cup was analyzed using the device. A stator was attached to a torque device and remained static during the rheological measurement. Yield stress was measured by rotating the device at a low speed at 3 rpm and at steady state torque. Torque was recorded when the rotation stopped. Two aqueous mixtures of titanium oxide (TiO{sub 2}) particles were used for the experiment. A cement spacer comprised of a blend of barite, citric acid and water was also measured. A volume-averaged shear method was used to calculate shear rate and shear stress. Key dimensionless variables were the impeller Reynolds number; the Froude number; the Weber number; and the Weissenberg number. Accuracy was assessed by examining the data obtained with a model fluid where yield stress data was already determined. Results of the comparison showed that values obtained using the device were consistent and comparable with results obtained using other techniques. It was concluded that further research is needed to characterize the elastic fluids in the device. 13 refs., 2 tabs., 3 figs.

  7. A novel in vivo corneal trans-epithelial electrical resistance measurement device. (United States)

    Uematsu, Masafumi; Mohamed, Yasser Helmy; Onizuka, Naoko; Ueki, Ryotaro; Inoue, Daisuke; Fujikawa, Azusa; Kitaoka, Takashi


    To develop a device that is capable of easily measuring corneal transepithelial electrical resistance (TER) and changes in the corneal barrier function. We had previously developed an in vivo method for measuring corneal TER using intraocular electrode. This method can be used to precisely measure the decline of the corneal barrier function after instillation of benzalkonium chloride (BAC). In order to lessen the invasiveness of that procedure, we further refined the method for measuring the corneal TER by developing electrodes that could be placed on the cornea and in the conjunctival sac instead of inserting them into the anterior chamber. TER was then calculated by subtracting the electrical resistance, which lacked the corneal epithelial input, from the whole electrical resistance that was measured between the electrodes. Slit lamp examination and scanning electron microscopy (SEM) were used to determine safety of the new device. Corneal TER changes after exposure to 0.02% BAC were determined using the new device as well as SEM and transmission electron microscopy (TEM). Slit lamp examination before and after exposure of rabbits' corneas to the sensor confirmed safety of the device. SEM examination revealed no difference of the corneal epithelium which exposed to the new device with normal corneas. SEM and TEM pictures revealed damaged microvilli and tight junctions after instillation of 0.02% BAC. TER change after treatment with 0.02%BAC was similar to those determined by the established anterior chamber method. We succeeded to develop a less invasive device for corneal TER measurement in vivo in animals. This new device may be applicable in the future for clinical use in humans. Copyright © 2015 Elsevier Inc. All rights reserved.

  8. Experimental and Theoretical Measurements of Concentration Distributions in Acoustic Focusing Devices

    Energy Technology Data Exchange (ETDEWEB)

    Rose, K A; Fisher, K; Jung, B; Ness, K; Mariella Jr., R P


    We describe a modeling approach to capture the particle motion within an acoustic focusing microfluidic device. Our approach combines finite element models for the acoustic forces with analytical models for the fluid motion and uses these force fields to calculate the particle motion in a Brownian dynamics simulation. We compare results for the model with experimental measurements of the focusing efficiency within a microfabricated device. The results show good qualitative agreement over a range of acoustic driving voltages and particle sizes.

  9. A Methodology to Measure the Environmental Impact of ICT Operating Systems across Different Device Platforms

    Institute of Scientific and Technical Information of China (English)

    Daniel R. Williams; Yinshan Tang


    Abstract-A new methodology was created to measure the energy consumption and related green house gas (GHG) emissions of a computer operating system (OS) across different device platforms. The methodology involved the direct power measurement of devices under different activity states. In order to include all aspects of an OS, the methodology included measurements in various OS modes, whilst uniquely, also incorporating measurements when running an array of defined software activities, so as to include OS application management features. The methodology was demonstrated on a laptop and phone that could each run multiple OSs, results confirmed that OS can significantly impact the energy consumption of devices. In particular, the new versions of the Microsoft Windows OS were tested and highlighted significant differences between the OS versions on the same hardware. The developed methodology could enable a greater awareness of energy consumption, during both the software development and software marketing processes.

  10. Automatic device for measuring biomechanical properties of cadaveric lumbar vertebrae of the human spine (United States)

    Bartoněk, Luděk.; Janák, Vladislav; Keprt, Jiří


    A new special second-generation computer-controlled device has been developed for measuring biomechanical characteristics of the lower part of the spine vertebras L1-L5 [1]. During straining and measurement of the rigidity of the sample as a whole it is also necessary to observe the movement of individual parts of the sample and to measure their mechanical resistances. The measurement of displacement and rotation of individual parts of the studied model was evaluated by optical methods based on the principle of moiré interferometry and fast Fourier transform [2]. During this device development and its verification the lumbar samples were replaced with a system of wooden rollers with system discrete rubber pads. The new computer-controlled device containing four stepper motors, four strain gauges and two CCD cameras.

  11. Attenuation length measurements of liquid scintillator with LabVIEW and reliability evaluation of the device

    CERN Document Server

    Gao, L; Ding, YY; Zhou, L; Wen, LJ; Xie, YG; Wang, ZG; Cai, X; Sun, XL; Fang, J; Xue, Z; Zhang, AW; LÜ, QW; Sun, LJ; Ge, YS; Liu, YB; Niu, SL; Hu, T; Cao, J; LÜ, JG


    The attenuation length measuring device was constructed by using oscilloscope and LabVIEW for signal acquisition and processing. The performance of the device has been tested with a variety of ways, the test results show that the set-up has a good stability and high precision (sigma/mean reached 0.4 percent). Besides, the accuracy of the measurement system will decrease by about 17 percent if a filter is used. The attenuation length of gadolinium-loaded liquid scintillator (Gd-LS) was measured as 15.10 plus or minus 0.35 m where Gd-LS was heavily used in Daya Bay Neutrino Experiment. In addition, one method based on the Beer-Lambert law was proposed to investigate the reliability of the measurement device, the R-square reached 0.9995. Moreover, three purification methods for Linear Alkyl Benzene (LAB) production were compared in the experiment.

  12. Forward-bias capacitance and current measurements for determining lifetimes and band narrowing in p-n junction solar cells (United States)

    Neugroschel, A.; Chen, P. J.; Pao, S. C.; Lindholm, F. A.


    A new method is described and illustrated for determining the minority-carrier diffusion length and lifetime in the base region of p-n junction solar cells. The method requires only capacitance measurements at the device terminals and its accuracy is estimated to be + or - 5%. It is applied to a set of silicon p-n junction devices and the values of the diffusion lengths agree with those obtained using the current response to X-ray excitation but disagree with those obtained by the OCVD method. The reasons for the relative inaccuracy of OCVD applied to silicon devices are discussed. The capacitance method includes corrections for a two-dimensional fringing effects which occur in small area devices. For a device having highly-doped base region and surface (emitter) layer, the method can be extended to enable the determination of material properties of the degenerately doped surface layer. These material properties include the phenomenological emitter lifetime and a measure of the energy band-gap narrowing in the emitter. An alternate method for determining the energy band-gap narrowing from temperature dependence of emitter current is discussed and demonstrated.

  13. Optofluidic Temperature and Pressure Measurements with Fiber Bragg Gratings Embedded in Microfluidic Devices

    CERN Document Server

    Cooksey, Gregory A


    The integration of photonic sensors into microfluidic devices provides opportunities for dynamic measurement of chemical and physical properties of fluids in very small volumes. We previously reported on the use of commercially available Fiber Bragg Gratings (FBGs) and on-chip silicon waveguides for temperature sensing. In this report, we demonstrate the integration of FBGs into easy-to-fabricate microfluidic devices and report on their sensitivity for temperature and pressure measurement in microliter volumes. These sensors present new routes to measurement in microfluidic applications such as small-volume calorimetry and microflow metrology.

  14. Analytical Expressions for Harmonic Distortion at Low Frequencies due to Device Mismatch in CMOS Current Mirrors

    DEFF Research Database (Denmark)

    Bruun, Erik


    One of the origins of harmonic distortion in current mirrors is the inevitable mismatch between the mirror transistors. In this brief we examine both single current mirrors and complementary class AB current mirrors and develop analytical expressions for the mismatch induced harmonic distortion. ...

  15. Current trends for improving the design of membrane devices for photoautotrophic biosynthesis is light dependent microorganisms

    Directory of Open Access Journals (Sweden)

    A. A. Shevtsov


    Full Text Available Modern trends in improving the design of membrane devices for photoautotrophic biosynthesis dependent lighting microorganisms aimed at a significant increase in the productivity of valuable products from biomass of microalgae and obtaining on the basis of their individual useful substances (drugs used in various industries and medicine. In film devices effectively the processes of heat - and mass-exchange with the gas comes into contact with the culture fluid flowing as a film on a transparent film-forming surface is STI in its light intensity and autotrophic biosynthesis occurs only in the presence of a mixture of air with carbon dioxide. Thus, completely eliminated the accumulation of metabolic products due to their continuous removal from film culture liquid with the process gas, which is not typical for devices of other types. Small size membrane bioreactors may increase the degree of saturation of the liquid carbon dioxide with the possibility of changing the concentration of gas in the culture fluid and to ensure the cultivation of microorganisms with a specified biomass yield. At present up to date-developed a significant number of ways to ensure contact of the gas with the liquid (bubbling, gas-lift, mechanical stirring, jet, membrane, etc. on the basis of which an industrial bioreactor, with various "stress" effect. It is believed that for the cultivation of the most optimal are bioreactors with mechanical stirring of the liquid, which allow the greatest productivity of biomass. However, the applied model of a mechanical mixing device to create a work whose cavity of the bioreactor chaotic, disorganized mixing, which contributes to the emergence, insufficient for the sustenance of the cell cultures and microorganisms. Analysis of the interactions of the gas with the liquid film devices showed the need to create a new generation of bioreactor with intensive mass transfer without the possibility of limiting the productivity of

  16. Detail of photo 7903109 stack of superconducting cables in the modulus measuring device

    CERN Multimedia


    The picture shows an assembly of insulated superconducting cables of the type used in the Po dipole magnet inserted in the elastic modulus measuring device (photos 7903547X and 7903169) in order to measures its mechanical properties under azimuthal compression. See also 7903547X, 7903169, 8307552X.

  17. A Charge-Coupled Device CCD line-scan system for road luminance measurement.

    NARCIS (Netherlands)

    Schreuder, D.A.


    The problems involved in measuring road luminance are discussed and a new measuring system described which is based on a line-scan Charge Coupled Device (CCD) configuration. It is designed for the assessment of average road surface luminance and degree of non-uniformity of road lighting. Additionall

  18. Assessing the Current State of Cognitive Frailty: Measurement Properties. (United States)

    Sargent, L; Brown, R


    Currently, an estimated 25-30% of people ages 85 or older have dementia, with a projected 115 million people worldwide living with dementia by 2050. With this worldwide phenomenon fast approaching, early detection of at-risk older adults and development of interventions focused on preventing loss in quality of life are increasingly important. A new construct defined by the International Consensus Group (I.A.N.A/I.A.G.G) as «cognitive frailty» combines domains of physical frailty with cognitive impairment and provides a framework for research that may provide a means to identify individuals with cognitive impairment caused by nonneurodegenerative conditions. Using the integrative review method of Whittemore and Knafl., 2005 this study examines and appraises the optimal measures for detecting cognitive frailty in clinical populations of older adults. The integrative review was conducted using PubMed, CINAHL, Web of Science, PsycInfo, and ProQuest Dissertations and Theses. From the total 185 articles retrieved, review of titles and key words were conducted. Following the initial review, 168 articles did not meet the inclusion criteria for association of frailty and cognition. Of the 18 fulltext articles reviewed, 11 articles met the inclusion criteria; these articles were reviewed in-depth to determine validity and reliability of the cognitive frailty measures. Predictive validity was established by the studies reviewed in four main areas: frailty and type of dementia MCI (OR 7.4, 95% CI 4.2-13.2), vascular dementia (OR 6.7, 95% CI 1.6-27.4) and Alzheimer's dementia (OR 3.2, 95% CI 1.7-6.2), frailty and vascular dementia (VaAD) is further supported by the rate of change in frailty x macroinfarcts (r = 0.032, p < 0.001); frailty and the individual domains of cognitive function established with the relationship of neurocognitive speed and change in cognition using regression coefficients; individual components of frailty and individual domains of cognitive function

  19. Development of a Multi-Site and Multi-Device Webgis-Based Tool for Tidal Current Energy Development (United States)

    Ang, M. R. C. O.; Panganiban, I. K.; Mamador, C. C.; De Luna, O. D. G.; Bausas, M. D.; Cruz, J. P.


    A multi-site, multi-device and multi-criteria decision support tool designed to support the development of tidal current energy in the Philippines was developed. Its platform is based on Geographic Information Systems (GIS) which allows for the collection, storage, processing, analyses and display of geospatial data. Combining GIS tools with open source web development applications, it becomes a webGIS-based marine spatial planning tool. To date, the webGIS-based tool displays output maps and graphs of power and energy density, site suitability and site-device analysis. It enables stakeholders and the public easy access to the results of tidal current energy resource assessments and site suitability analyses. Results of the initial development showed that it is a promising decision support tool for ocean renewable energy project developments.

  20. A device to improve the Schleger and Turner method for sweating rate measurements (United States)

    Pereira, Alfredo Manuel Franco; Alves, Alexandre; Infante, Paulo; Titto, Evaldo A. L.; Baccari, Flávio; Almeida, J. A. Afonso


    The objective of this study was to test a device developed to improve the functionality, accuracy and precision of the original technique for sweating rate measurements proposed by Schleger and Turner [Schleger AV, Turner HG (1965) Aust J Agric Res 16:92-106]. A device was built for this purpose and tested against the original Schleger and Turner technique. Testing was performed by measuring sweating rates in an experiment involving six Mertolenga heifers subjected to four different thermal levels in a climatic chamber. The device exhibited no functional problems and the results obtained with its use were more consistent than with the Schleger and Turner technique. There was no difference in the reproducibility of the two techniques (same accuracy), but measurements performed with the new device had lower repeatability, corresponding to lower variability and, consequently, to higher precision. When utilizing this device, there is no need for physical contact between the operator and the animal to maintain the filter paper discs in position. This has important advantages: the animals stay quieter, and several animals can be evaluated simultaneously. This is a major advantage because it allows more measurements to be taken in a given period of time, increasing the precision of the observations and diminishing the error associated with temporal hiatus (e.g., the solar angle during field studies). The new device has higher functional versatility when taking measurements in large-scale studies (many animals) under field conditions. The results obtained in this study suggest that the technique using the device presented here could represent an advantageous alternative to the original technique described by Schleger and Turner.

  1. Nanoelectronic devices and measurements toward nanocrystal-based optoelectronics and DNA sequencing with solid-state nanopores (United States)

    Willis, Lauren J.

    Nanoelectronics are critical to exploring nanoscale materials: including nanocrystals, which could revolutionize optoelectronics, and DNA, which could revolutionize medicine. Our suspended silicon nitride membranes combined with electron beam lithography and transmission electron microscopy have been essential to our device fabrication and measurements. Nanocyrstal-based optoelectronics have garnered much interest, and thus new ways of increasing their transport are constantly being researched. We used ligand exchanges to decrease the interparticle spacing of nanocrystal films, which is known to augment transport. Using gaps only a few nanoparticles-wide, we measured transport and found that current could be controlled with annealing, hydrazine treatment, and voltage-sweeping. Annealing destroyed the insulating ligand surrounding each nanocrystal and allowed the particles to move closer. This usually increased the photocurrent, without significantly increasing the dark current. However, this was ineffective on sub-monolayers. Hydrazine was similar, except it replaced the ligand, rather than destroying it, and it was effective on sub-monolayers; however, it caused a large increase in the dark current as well as the photocurrent. Sweeping the voltage overnight could increase or decrease the photocurrent of a sample depending on whether the sample was illuminated or in the dark, corresponding to traps being emptied or filled. In addition to nanocrystals, our devices were used in solution to sense DNA. We fabricated nanelectrodes and nanowires next to nanopores and showed DNA translocations ionically. We also developed methods to make the pores hydrophilic without the use of piranha; we instead used rapid thermal annealing, heated ozone treatments, and oxygen/hydrogen plasmas. While high rates of device failure was a challenge, recommendations for future experiments are presented, including grounding of all equipment and an extreme focus on sample cleanliness. We have

  2. New lightning current resistant low voltage limiting device for DC railway systems; Neue blitzstromtragfaehige Niederspannungsbegrenzungseinrichtung zum Potenzialschutz von Gleichstrombahnsystemen

    Energy Technology Data Exchange (ETDEWEB)

    Rocks, A.; Hinrichsen, V. [Technische Univ. Darmstadt (Germany). Fachgebiet Hochspannungstechnik; Richter, B. [ABB Schweiz AG, Wettingen (Switzerland); Zayer, H. [ESN Bahngeraete GmbH, Mannheim (Germany)


    In dc railway systems, low voltage limiters are applied to limit potential rises in case of failures by forming a permanent short-circuit between return circuit and Earth. These devices can usually carry only moderate lightning currents without permanent failure. In this contribution, a new concept is introduced which provides personal as well as equipment protection by combining a surge arrester and a low voltage limiter in a suited way. (orig.)

  3. An investigation of highly accurate and precise robotic hole measurements using non-contact devices

    Directory of Open Access Journals (Sweden)

    Usman Zahid


    Full Text Available Industrial robots arms are widely used in manufacturing industry because of their support for automation. However, in metrology, robots have had limited application due to their insufficient accuracy. Even using error compensation and calibration methods, robots are not effective for micrometre (μm level metrology. Non-contact measurement devices can potentially enable the use of robots for highly accurate metrology. However, the use of such devices on robots has not been investigated. The research work reported in this paper explores the use of different non-contact measurement devices on an industrial robot. The aim is to experimentally investigate the effects of robot movements on the accuracy and precision of measurements. The focus has been on assessing the ability to accurately measure various geometric and surface parameters of holes despite the inherent inaccuracies of industrial robot. This involves the measurement of diameter, roundness and surface roughness. The study also includes scanning of holes for measuring internal features such as start and end point of a taper. Two different non-contact measurement devices based on different technologies are investigated. Furthermore, effects of eccentricity, vibrations and thermal variations are also assessed. The research contributes towards the use of robots for highly accurate and precise robotic metrology.

  4. Photo current generation in RGO - CdS nanorod thin film device (United States)

    Chakraborty, Koushik; Chakrabarty, Sankalpita; Ibrahim, Sk.; Pal, Tanusri; Ghosh, Surajit


    Herein, we report the synthesis and characterization of reduced graphene oxide (RGO) - cadmium sulfide (CdS) nanocomposite materials. The reduction of GO, formation of CdS and decoration of CdS onto RGO sheets were done in a one- pot solvothermal process. We have observed that the PL intensity for CdS nanorods remarkably quenched after the attachment of RGO, which established the photo induced charge transformation from the CdS nanorod to RGO sheets through the RGO-CdS interface. The optoelectronic transport properties of our fabricated large area thin film device exhibits excellent photo induced charge generation under simulated solar light illumination. The photo sensitivity of the device increases linearly with the increase of illuminated light intensity. The RGO-CdS composite exhibits enhance photocatalytic dye degradation efficiency in compare to control CdS under simulated solar light illumination.

  5. High-temperature strain measurement techniques: Current developments and challenges (United States)

    Lemcoe, M. M.


    Since 1987, a very substantial amount of R&D has been conducted in an attempt to develop reliable strain sensors for the measurements of structural strains during ground testing and hypersonic flight, at temperatures up to at least 2000 deg F. Much of the effort has been focused on requirements of the NASP Program. This presentation is limited to the current sensor development work and characterization studies carried out within that program. It is basically an assessment as to where we are now and what remains to be done in the way of technical accomplishments to meet the technical challenges posed by the requirements and constraints established for the NASP Program. The approach for meeting those requirements and constraints has been multi-disciplinary in nature. It was recognized early on that no one sensor could meet all these requirements and constraints, largely because of the large temperature range (cryogenic to at least 2000 deg F) and many other factors, including the most challenging requirement that the sensor system be capable of obtaining valid 'first cycle data'. Present candidate alloys for resistance-type strain gages include Fe-Cr-Al and Pd-Cr. Although they have superior properties regarding withstanding very high temperatures, they exhibit large apparent strains that must either be accounted for or cancelled out by various techniques, including the use of a dual-element, half-bridge dummy gage, or electrical compensation networks. A significant effort is being devoted to developing, refining, and evaluating the effectiveness of those techniques over a broad range in temperature and time. In the quest to obtain first-cycle data, ways must be found to eliminate the need to prestabilize or precondition the strain gage, before it is attached to the test article. It should be noted that present NASP constraints do not permit prestabilization of the sensor, in situ. Gages are currently being 'heat treated' during manufacture in both the wire- and foil

  6. Study of radiation-induced leakage current between adjacent devices in a CMOS integrated circuit

    Institute of Scientific and Technical Information of China (English)

    Ding Lili; Guo Hongxia; Chen Wei; Fan Ruyu


    Radiation-induced inter-device leakage is studied using an analytical model and TCAD simulation.There were some different opinions in understanding the process of defect build-up in trench oxide and parasitic leakage path turning on from earlier studies.To reanalyze this problem and make it beyond argument,every possible variable is considered using theoretical analysis,not just the change of electric field or oxide thickness independently.Among all possible inter-device leakage paths,parasitic structures with N-well as both drain and source are comparatively more sensitive to the total dose effect when a voltage discrepancy exists between the drain and source region.Since N-well regions are commonly connected to the same power supply,these kinds of structures will not be a problem in a real CMOS integrated circuit.Generally speaking,conduction paths of inter-device leakage existing in a real integrated circuit and under real electrical circumstances are not very sensitive to the total ionizing dose effect.

  7. A Solid-State Fault Current Limiting Device for VSC-HVDC Systems (United States)

    Larruskain, D. Marene; Zamora, Inmaculada; Abarrategui, , Oihane; Iturregi, Araitz


    Faults in the DC circuit constitute one of the main limitations of voltage source converter VSC-HVDC systems, as the high fault currents can damage seriously the converters. In this article, a new design for a fault current limiter (FCL) is proposed, which is capable of limiting the fault current as well as interrupting it, isolating the DC grid. The operation of the proposed FCL is analysed and verified with the most usual faults that can occur in overhead lines.

  8. Sensor Measurement Strategies for Monitoring Offshore Wind and Wave Energy Devices (United States)

    O'Donnell, Deirdre; Srbinovsky, Bruno; Murphy, Jimmy; Popovici, Emanuel; Pakrashi, Vikram


    While the potential of offshore wind and wave energy devices is well established and accepted, operations and maintenance issues are still not very well researched or understood. In this regard, scaled model testing has gained popularity over time for such devices at various technological readiness levels. The dynamic response of these devices are typically measured by different instruments during such scaled tests but agreed sensor choice, measurement and placement guidelines are still not in place. This paper compared the dynamic responses of some of these sensors from a scaled ocean wave testing to highlight the importance of sensor measurement strategies. The possibility of using multiple, cheaper sensors of seemingly inferior performance as opposed to the deployment of a small number of expensive and accurate sensors are also explored. An energy aware adaptive sampling theory is applied to highlight the possibility of more efficient computing when large volumes of data are available from the tested structures. Efficient sensor measurement strategies are expected to have a positive impact on the development of an device at different technological readiness levels while it is expected to be helpful in reducing operation and maintenance costs if such an approach is considered for the devices when they are in operation.

  9. The enhanced measurement-device-independent quantum key distribution with two-intensity decoy states (United States)

    Zhu, Jian-Rong; Zhu, Feng; Zhou, Xing-Yu; Wang, Qin


    We put forward a new scheme for implementing the measurement-device-independent quantum key distribution (QKD) with weak coherent source, while using only two different intensities. In the new scheme, we insert a beam splitter and a local detector at both Alice's and Bob's side, and then all the triggering and non-triggering signals could be employed to process parameter estimations, resulting in very precise estimations for the two-single-photon contributions. Besides, we compare its behavior with two other often used methods, i.e., the conventional standard three-intensity decoy-state measurement-device-independent QKD and the passive measurement-device-independent QKD. Through numerical simulations, we demonstrate that our new approach can exhibit outstanding characteristics not only in the secure transmission distance, but also in the final key generation rate.

  10. Measuring Soil Moisture using the Signal Strength of Buried Bluetooth Devices. (United States)

    Hut, R.; Campbell, C. S.


    A low power bluetooth Low Energy (BLE) device is burried 20cm into the soil and a smartphone is placed on top of the soil to test if bluetooth signal strength can be related to soil moisture. The smartphone continuesly records and stores bluetooth signal strength of the device. The soil is artifcially wetted and drained. Results show a relation between BLE signal strength and soil moisture that could be used to measure soil moisture using these off-the-shelf consumer electronics. This opens the possibily to develop sensors that can be buried into the soil, possibly below the plow-line. These sensors can measure local parameters such as electric conductivity, ph, pressure, etc. Readings would be uploaded to a device on the surface using BLE. The signal strength of this BLE would be an (additional) measurement of soil moisture.

  11. Measurement of inner and/or outer profiles of pipes using ring beam devices (United States)

    Wakayama, T.; Yoshizawa, T.


    Inner profile measurement is an important matter in such fields as medicine, dentistry and anthropology as well as mechanical engineering and industry. Here we propose a measurement method for inner diameter of pipes and/or holes. The key device in this technique is a ring beam device which consists of a conical mirror and a laser diode. And the fundamental principle is based on optical sectioning without any contact probe. The optically sectioned profile of an inner wall of a pipe-like object is analyzed to give the inner profile in addition to the inner diameter. This optical instrument with a simple and small configuration is now under development for practical uses. In the hitherto-tried experimental works, the availability of this instrument has been highly evaluated and usability for practical applications is expected, especially, for measurement and inspection of mechanical components and elements besides pipes. This ring beam device consisting of a conical mirror and a LD is assembled to form a disklike light beam sheet. We show measurement result of pipes and holes, and, at the same time, report a compact inner profile measuring instrument. Both the ring beam device and a miniaturized CCD camera are fabricated in a glass tube. Availability of this instrument is shown by measuring the inner profiles of various pipes. In response to this trial, there appeared a strong request that not only the internal but external profiles should be measured simultaneously. Therefore we propose an improved method for measuring the external profile in addition to the internal profile. In our arrangement, one pair of concaved conical mirrors is used for the external profile measurement. In combination with the inner profile measurement technique, simultaneous measurement of the inner and outer profiles becomes attainable. A measurement result on a bevel gear shows availability of newly proposed principle. Now we are aiming to realize simultaneous measurement of the internal

  12. Comparison of SAR and induced current densities in adults and children exposed to electromagnetic fields from electronic article surveillance devices (United States)

    Martínez-Búrdalo, M.; Sanchis, A.; Martín, A.; Villar, R.


    Electronic article surveillance (EAS) devices are widely used in most stores as anti-theft systems. In this work, the compliance with international guidelines in the human exposure to these devices is analysed by using the finite-difference time-domain (FDTD) method. Two sets of high resolution numerical phantoms of different size (REMCOM/Hershey and Virtual Family), simulating adult and child bodies, are exposed to a 10 MHz pass-by panel-type EAS consisting of two overlapping current-carrying coils. Two different relative positions between the EAS and the body (frontal and lateral exposures), which imply the exposure of different parts of the body at different distances, have been considered. In all cases, induced current densities in tissues of the central nervous system and specific absorption rates (SARs) are calculated to be compared with the limits from the guidelines. Results show that induced current densities are lower in the case of adult models as compared with those of children in both lateral and frontal exposures. Maximum SAR values calculated in lateral exposure are significantly lower than those calculated in frontal exposure, where the EAS-body distance is shorter. Nevertheless, in all studied cases, with an EAS driving current of 4 A rms, maximum induced current and SAR values are below basic restrictions.

  13. Inter-device reliability of an automatic-scoring actigraph for measuring sleep in healthy adults

    Directory of Open Access Journals (Sweden)

    Matthew Driller


    Full Text Available Actigraphy has become a common method of measuring sleep due to its non-invasive, cost-effective nature. An actigraph (Readiband™ that utilizes automatic scoring algorithms has been used in the research, but is yet to be evaluated for its inter-device reliability. A total of 77 nights of sleep data from 11 healthy adult participants was collected while participants were concomitantly wearing two Readiband™ actigraphs attached together (ACT1 and ACT2. Sleep indices including total sleep time (TST, sleep latency (SL, sleep efficiency (SE%, wake after sleep onset (WASO, total time in bed (TTB, wake episodes per night (WE, sleep onset variance (SOV and wake variance (WV were assessed between the two devices using mean differences, 95% levels of agreement, intraclass correlation coefficients (ICC, typical error of measurement (TEM and coefficient of variation (CV% analysis. There were no significant differences between devices for any of the measured sleep variables (p>0.05. TST, SE, SL, TTB, SOV and WV all resulted in very high ICC's (>0.90, with WASO and WE resulting in high ICC's between devices (0.85 and 0.80, respectively. Mean differences of −2.1 and 0.2 min for TST and SL were associated with a low TEM between devices (9.5 and 3.8 min, respectively. SE resulted in a 0.3% mean difference between devices. The Readiband™ is a reliable tool for researchers using multiple devices of this brand in sleep studies to assess basic measures of sleep quality and quantity in healthy adult populations.

  14. The Total Deviation Index estimated by Tolerance Intervals to evaluate the concordance of measurement devices

    Directory of Open Access Journals (Sweden)

    Ascaso Carlos


    Full Text Available Abstract Background In an agreement assay, it is of interest to evaluate the degree of agreement between the different methods (devices, instruments or observers used to measure the same characteristic. We propose in this study a technical simplification for inference about the total deviation index (TDI estimate to assess agreement between two devices of normally-distributed measurements and describe its utility to evaluate inter- and intra-rater agreement if more than one reading per subject is available for each device. Methods We propose to estimate the TDI by constructing a probability interval of the difference in paired measurements between devices, and thereafter, we derive a tolerance interval (TI procedure as a natural way to make inferences about probability limit estimates. We also describe how the proposed method can be used to compute bounds of the coverage probability. Results The approach is illustrated in a real case example where the agreement between two instruments, a handle mercury sphygmomanometer device and an OMRON 711 automatic device, is assessed in a sample of 384 subjects where measures of systolic blood pressure were taken twice by each device. A simulation study procedure is implemented to evaluate and compare the accuracy of the approach to two already established methods, showing that the TI approximation produces accurate empirical confidence levels which are reasonably close to the nominal confidence level. Conclusions The method proposed is straightforward since the TDI estimate is derived directly from a probability interval of a normally-distributed variable in its original scale, without further transformations. Thereafter, a natural way of making inferences about this estimate is to derive the appropriate TI. Constructions of TI based on normal populations are implemented in most standard statistical packages, thus making it simpler for any practitioner to implement our proposal to assess agreement.

  15. Design and implementation of automatic shading device for diffuse radiation measurement

    Institute of Scientific and Technical Information of China (English)

    LYU; Wenhua; BIAN; Zeqiang; CHONG; Wei


    Considering the problem of too large area the shading disc covered,complex shadow band coefficients and too big diffuse radiation measurement bias,an automatic shading device for diffuse radiometer is designed and realized. Set a shading ball on the automatic sun tracker,drive linkage parallelogram structure with the declination axis arm,the shading ball can rotate synchronously with the motion of the sun and shade beam radiation measured with pyranometer,thus shading beam radiation and measuring diffuse radiation can be realized automatically. The comparison test results show that the automatic shading device can realize diffuse radiation measurement automatically,the accuracy of diffuse radiation readings can get a 18. 7% improvement compared with traditional measure system,greatly improves the reliability and accuracy of the diffuse radiation measurement.

  16. Off-axis electron holography for the measurement of active dopants in silicon semiconductor devices (United States)

    Cooper, David


    There is a need in the semiconductor industry for a dopant profiling technique with nm-scale resolution. Here we demonstrate that off-axis electron holography can be used to provide maps of the electrostatic potential in semiconductor devices with nm-scale resolution. In this paper we will discuss issues regarding the spatial resolution and precision of the technique. Then we will discuss problems with specimen preparation and how this affects the accuracy of the measurements of the potentials. Finally we show results from experimental off-axis electron holography applied to nMOS and pMOS CMOS devices grown on bulk silicon and silicon- on-insulator type devices and present solutions to common problems that are encountered when examining these types of devices.

  17. Measuring surface current velocities in the Agulhas region with ASAR

    CSIR Research Space (South Africa)

    Rouault, MJ


    Full Text Available velocities for oceanographic research in the Agulhas Current are assessed. Comparisons between radar, altimetry and surface drifters observations of the surface currents show that accurate wind fields are a strong pre-requisite to the derivation of meaningful...

  18. Comparative measurements of the level of turbulence atmosphere by optical and acoustic devices (United States)

    Lukin, V. P.; Botugina, N. N.; Gladkih, V. A.; Emaleev, O. N.; Konyaev, P. A.; Odintsov, S. L.; Torgaev, A. V.


    The complex measurements of level of atmospheric turbulence are conducted by the differential measurement device of turbulence (DMT), wave-front sensor (WFS), and also by ultrasonic weather-stations. Daytime measurements of structure parameters of refractive index of atmospheric turbulence carried out on horizontal optical paths on the Base Experimental Complex (BEC) of V.E. Zuev Institute of Atmospheric Optics SB RAS (IOA). A comparative analysis over of the got results is brought.

  19. Reliability of measuring pelvic floor elevation with a diagnostic ultrasonic imaging device


    Ubukata, Hitomi; Maruyama, Hitoshi; Huo, Ming


    [Purpose] The purpose of this study was to investigate the reliability of measuring the amount of pelvic floor elevation during pelvic and abdominal muscle contraction with a diagnostic ultrasonic imaging device. [Subjects] The study group comprised 11 healthy women without urinary incontinence or previous birth experience. [Methods] We measured the displacement elevation of the bladder base during contraction of the abdominal and pelvic floor muscles was measured using a diagnostic ultrasoni...

  20. Assessment of a portable device for the quantitative measurement of ankle joint stiffness in spastic individuals

    DEFF Research Database (Denmark)

    Lorentzen, Jakob; Grey, Michael J; Geertsen, Svend Sparre


    OBJECTIVE: Spasticity is a common complication with neurological diseases and CNS lesions. Instrumented systems to evaluate spasticity often cannot provide an immediate result, thus limiting their clinical usefulness. In this study we investigated the accuracy and reliability of the portable...... was measured with the portable device and a stationary torque motor. Inter- and intra-rater reliability was assessed with the intra-class correlation coefficient (ICC). RESULTS: Stiffness measures with the portable and stationary devices were significantly correlated for controls and MS participants (p...

  1. Measurement-device-independent quantum key distribution with nitrogen vacancy centers in diamond (United States)

    Lo Piparo, Nicoló; Razavi, Mohsen; Munro, William J.


    Memory-assisted measurement-device-independent quantum key distribution (MA-MDI-QKD) has recently been proposed as a possible intermediate step towards the realization of quantum repeaters. Despite its relaxing some of the requirements on quantum memories, the choice of memory in relation to the layout of the setup and the protocol has a stark effect on our ability to beat existing no-memory systems. Here, we investigate the suitability of nitrogen vacancy (NV) centers, as quantum memories, in MA-MDI-QKD. We particularly show that moderate cavity enhancement is required for NV centers if we want to outperform no-memory QKD systems. Using system parameters mostly achievable by today's state of the art, we then anticipate some total key rate advantage in the distance range between 300 and 500 km for cavity-enhanced NV centers. Our analysis accounts for major sources of error including the dark current, the channel loss, and the decoherence of the quantum memories.

  2. Food parenting: a selective review of current measurement and an empirical examination to inform future measurement. (United States)

    Musher-Eizenman, Dara R; Kiefner, Allison


    Interactions between parents and children in regard to food are an important part of the development of food preferences and intake patterns for children. The measurement of this complex and multidimensional construct is very challenging. This article examines the current status of measurement in this domain in a selective review, considers qualitative input from parents and adolescents in an empirical examination of the topic, and makes concrete recommendations for the future. Qualitatively, there were important differences between what the adolescents reported that their parents did to impact their eating habits, what parents of younger children report they currently do, and what researchers typically measure in research on parental feeding practices. On the basis of these empirical findings and our review of the literature, we recommend that food parenting be measured on three levels: Feeding styles (e.g., authoritative), food parenting practices (e.g., restriction), and specific feeding behaviors (e.g., putting food out of the child's reach). Specific recommendations for future study are given for each level of measurement.

  3. Eddy current NDT: a suitable tool to measure oxide layer thickness in PWR fuel rods

    Energy Technology Data Exchange (ETDEWEB)

    Alencar, Donizete A.; Silva Junior, Silverio F. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil)], e-mail:, e-mail:; Vieira, Andre L.P.S. [Industrias Nucleares do Brasil (INB S.A.), Resende, RJ (Brazil). Fabrica de Combustivel Nuclear], e-mail:; Soares, Adolpho [Technotest Consultoria e Acessoria Ltda., Belo Horizonte, MG (Brazil)], e-mail:


    Eddy current is a nondestructive test (NDT) widely used in industry to support integrity analysis of components and equipment. In the nuclear area it is frequently applied to inspect tubes installed in tube exchangers, such as steam generators and condensers in PWR plants, as well as turbine blades. Adequately assisted by means of robotic devices, that inspection method has been pointed as a suitable tool to perform accurate oxide layer thickness measurements in PWR fuel rods. This paper shows some theoretical aspects and physical operating principles of the inspection method, as well as test probes construction details, and the calibration reference standards fabrication processes. Furthermore, some data, experimentally obtained at INB laboratories and other technical information obtained from TECNATOM S.A. are presented, showing the accuracy and efficacy of such NDT method. (author)

  4. Parameter Estimation of Inverter and Motor Model at Standstill using Measured Currents Only

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Knudsen, Morten; Tønnes, M.


    Methods for estimation of the parameters in the electrical equivalent diagram for the induction motor, based on special designed experiments, are given. In all experriments two of the three phases are given the same potential, i.e., no net torque is generatedand the motor is at standstill. Input...... to the system is the reference values for the stator voltages given as duty cycles for the Pulse With Modulated power device. The system output is the measured stator currents. Three experiments are describedgiving respectively 1) the stator resistance and inverter parameters, 2) the stator transient inductance...... and 3) the referred rotor rotor resistance and magnetizing inductance. The method developed in the two last experiments is independent of the inverter nonlinearity. New methods for system identification concerning saturation of the magnetic flux are given and a reference value for the flux level...

  5. Measurement of Terahertz Optical-Beat Frequency Using High-Order Harmonics of Microwave in a Photoconductive Device

    Directory of Open Access Journals (Sweden)

    Kengo Murasawa


    Full Text Available A method for measuring frequencies of the terahertz (THz radiation emitted by the antenna mounted on the photoconductive (PC device is presented. Two laser beams with slightly different frequencies irradiate the PC device, producing a beat current of 1 THz in the photocurrent. A microwave signal is applied to the antenna electrode. The frequency of the THz wave is measured using the homodyne detection of the optical beat with the high-order harmonics of the microwave. It is being investigated that the high-order harmonics are produced by the PC device owing to its nonlinearity. Periodic peaks generated by the homodyne detection were observed in the photocurrent, as the microwave was swept from 16 to 20 GHz with a power of −40 dBm. Using the peak frequencies, the THz-wave frequency was determined to be 1030.3±3.73 GHz. The measurement error is estimated to be less than 0.43 GHz. The proposed method realizes a compact frequency meter in the THz region.

  6. Biased low differential input impedance current receiver/converter device and method for low noise readout from voltage-controlled detectors (United States)

    Degtiarenko, Pavel V.; Popov, Vladimir E.


    A first stage electronic system for receiving charge or current from voltage-controlled sensors or detectors that includes a low input impedance current receiver/converter device (for example, a transimpedance amplifier), which is directly coupled to the sensor output, a source of bias voltage, and the device's power supply (or supplies), which use the biased voltage point as a baseline.

  7. Four classification schemes of adult motivation: current views and measures. (United States)

    Barbuto, John E


    Classification of perspectives on motivation and recommendations for measurement are provided. Motivation is classified into four broad categories: content theories, process theories, decision-making theories, and sustained-effort theories--drawing from different theories and measures. Recommendations on measurement are developed for each classification scheme of motivation.

  8. In-vehicle extremity injuries from improvised explosive devices: current and future foci. (United States)

    Ramasamy, Arul; Masouros, Spyros D; Newell, Nicolas; Hill, Adam M; Proud, William G; Brown, Katherine A; Bull, Anthony M J; Clasper, Jon C


    The conflicts in Iraq and Afghanistan have been epitomized by the insurgents' use of the improvised explosive device against vehicle-borne security forces. These weapons, capable of causing multiple severely injured casualties in a single incident, pose the most prevalent single threat to Coalition troops operating in the region. Improvements in personal protection and medical care have resulted in increasing numbers of casualties surviving with complex lower limb injuries, often leading to long-term disability. Thus, there exists an urgent requirement to investigate and mitigate against the mechanism of extremity injury caused by these devices. This will necessitate an ontological approach, linking molecular, cellular and tissue interaction to physiological dysfunction. This can only be achieved via a collaborative approach between clinicians, natural scientists and engineers, combining physical and numerical modelling tools with clinical data from the battlefield. In this article, we compile existing knowledge on the effects of explosions on skeletal injury, review and critique relevant experimental and computational research related to lower limb injury and damage and propose research foci required to drive the development of future mitigation technologies.

  9. Current practices and problems in the reuse of single-use devices in Japan. (United States)

    Koh, Aiko; Kawahara, Kazuo


    Along with the popularization of endoscopic surgeries, the reuse of disposable single-use devices (SUDs), which may cause various risks, has become a considerable issue globally. We conducted the survey by questionnaires for the operating room (OR) head nurses to obtain hospital-based answer. First survey was done for three months in 2000 by sending the questionnaires to 2,224 hospitals. The second survey was done in 2003. In addition, for trocars and endoscopic clips, we carried out laboratory functional tests for the reuse of these reprocessed devices. As a total, 94.4% of hospitals reused SUDs routinely. The second survey showed significant decrease in the frequency of reuse to 86.2% as a whole. In the sample study, gross inspection showed the existence of contamination with debris. In-vitro sample study on in-hospital reprocessed instruments also demonstrated damaged endoscopic clips with impaired holding power. This study has demonstrated a still high frequency of reuse of SUDs in endoscopic surgeries in Japan. Although financial background may be the main reason, what is necessary to promote the single use of SUDs are multidisciplinary and composite approaches including an effort to lower the product price in parallel with the establishment of regulation and education programs.

  10. Multi-pin Langmuir probe measurement for identification of blob propagation characteristics in the Large Helical Device

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, H., E-mail: [National Institute for Fusion Science, Toki 509-5292 (Japan); Masuzaki, S. [National Institute for Fusion Science, Toki 509-5292 (Japan); Ohno, N. [Graduate School of Engineering, Nagoya University, Nagoya, Aichi 464-8603 (Japan); Morisaki, T. [National Institute for Fusion Science, Toki 509-5292 (Japan); Tsuji, Y. [Graduate School of Engineering, Nagoya University, Nagoya, Aichi 464-8603 (Japan)


    In order to investigate the blobby plasma transport in the Large Helical Device, we have measured electrostatic fluctuations around the divertor leg by using a newly-designed multi-pin reciprocating Langmuir probe. Near the low-field side edge of the divertor leg, positive spikes of ion saturation current fluctuation were observed. In addition, the electric field which correlates with the ion saturation current fluctuation was firstly evaluated with the neighboring floating potential measurement. Considering the positional relationship with the magnetic geometry, the identified direction of the electric field inside the blobs is consistent with the theoretically predicted E × B motion. By applying the conditional averaging method, a quantitative speed of the blobs was preliminary estimated.

  11. Non-Contact Stiffness Measurement of a Suspended Single Walled Carbon Nanotube Device (United States)

    Zheng, Yun; Su, Chanmin; Getty, Stephanie


    A new nanoscale electric field sensor was developed for studying triboelectric charging in terrestrial and Martian dust devils. This sensor is capable to measure the large electric fields for large dust devils without saturation. However, to quantify the electric charges and the field strength it is critical to calibrate the mechanical stiffness of the sensor devices. We performed a technical feasibility study of the Nano E-field Sensor stiffness by a non-contact stiffness measurement method. The measurement is based on laser Doppler vibrometer measurement of the thermal noise due to energy flunctuations in the devices. The experiment method provides a novel approach to acquire data that is essential in analyzing the quantitative performance of the E-field Nano Sensor. To carry out the non-contact stiffness measurement, we fabricated a new Single-Walled Carbon Nanotube (SWCNT) E-field sensor with different SWCNTs suspension conditions. The power spectra of the thermal induced displacement in the nano E-field sensor were measured at the accuracy of picometer. The power spectra were then used to derive the mechanical stiffness of the sensors. Effect of suspension conditions on stiffness and sensor sensitivty was discussed. After combined deformation and resistivity measurement, we can compare with our laboratory testing and field testing results. This new non-contact measurement technology can also help to explore to other nano and MEMS devices in the future.

  12. Measurement of Underwater Operational Noise Emitted by Wave and Tidal Stream Energy Devices. (United States)

    Lepper, Paul A; Robinson, Stephen P


    The increasing international growth in the development of marine and freshwater wave and tidal energy harvesting systems has been followed by a growing requirement to understand any associated underwater impact. Radiated noise generated during operation is dependent on the device's physical properties, the sound-propagation environment, and the device's operational state. Physical properties may include size, distribution in the water column, and mechanics/hydrodynamics. The sound-propagation environment may be influenced by water depth, bathymetry, sediment type, and water column acoustic properties, and operational state may be influenced by tidal cycle and wave height among others This paper discusses some of the challenges for measurement of noise characteristics from these devices as well as a case study of the measurement of radiated noise from a full-scale wave energy converter.

  13. Experimental measurement-device-independent quantum key distribution with uncharacterized encoding. (United States)

    Wang, Chao; Wang, Shuang; Yin, Zhen-Qiang; Chen, Wei; Li, Hong-Wei; Zhang, Chun-Mei; Ding, Yu-Yang; Guo, Guang-Can; Han, Zheng-Fu


    Measurement-device-independent quantum key distribution (MDI QKD) is an efficient way to share secrets using untrusted measurement devices. However, the assumption on the characterizations of encoding states is still necessary in this promising protocol, which may lead to unnecessary complexity and potential loopholes in realistic implementations. Here, by using the mismatched-basis statistics, we present the first proof-of-principle experiment of MDI QKD with uncharacterized encoding sources. In this demonstration, the encoded states are only required to be constrained in a two-dimensional Hilbert space, and two distant parties (Alice and Bob) are resistant to state preparation flaws even if they have no idea about the detailed information of their encoding states. The positive final secure key rates of our system exhibit the feasibility of this novel protocol, and demonstrate its value for the application of secure communication with uncharacterized devices.

  14. In situ azimuthal rotation device for linear dichroism measurements in scanning transmission x-ray microscopy (United States)

    Hernández-Cruz, D.; Hitchcock, A. P.; Tyliszczak, T.; Rousseau, M.-E.; Pézolet, M.


    A novel miniature rotation device used in conjunction with a scanning transmission x-ray microscope is described. It provides convenient in situ sample rotation to enable measurements of linear dichroism at high spatial resolution. The design, fabrication, and mechanical characterization are presented. This device has been used to generate quantitative maps of the spatial distribution of the orientation of proteins in several different spider and silkworm silks. Specifically, quantitative maps of the dichroic signal at the C 1s→π*amide transition in longitudinal sections of the silk fibers give information about the spatial orientation, degree of alignment, and spatial distribution of protein peptide bonds. A new approach for analyzing the dichroic signal to extract orientation distributions, in addition to magnitudes of aligned components, is presented and illustrated with results from Nephila clavipes dragline spider silk measured using the in situ rotation device.

  15. Reduction of RESET current in phase change memory devices by carbon doping in GeSbTe films (United States)

    Park, J. H.; Kim, S.-W.; Kim, J. H.; Wu, Z.; Cho, S. L.; Ahn, D.; Ahn, D. H.; Lee, J. M.; Nam, S. U.; Ko, D.-H.


    Phase Change Memory (PCM) has been proposed for use as a substitute for flash memory to satisfy the huge demands for high performance and reliability that promise to come in the next generation. In spite of its high scalability, reliability, and simple structure, high writing current, e.g., RESET current, has been a significant obstacle to achieving a high density in storage applications and the low power consumption required for use in mobile applications. We report herein on an attempt to determine the level of carbon incorporated into a GeSbTe (GST) film that is needed to reduce the RESET current of PCM devices. The crystal structure of the film was transformed into an amorphous phase by carbon doping, the stability of which was enhanced with increasing carbon content. This was verified by the small grain size and large band gap that are typically associated with carbon. The increased level of C-Ge covalent bonding is responsible for these enhancements. Thus, the resistance of the carbon doped Ge2Sb2Te5 film was higher than that for an undoped GST film by a factor of 2 orders of magnitude after producing a stable face-centered cubic phase by annealing. As a consequence, the PCM devices showed a significant reduction in RESET current as low as 23% when the carbon content was increased to 11.8 at. %. This can be attributed to the elevated SET resistance, which is proportional to the dynamic resistance of the PCM device, caused by the high resistance due to a carbon doped GST film.

  16. Optimization of process parameter variations on leakage current in in silicon-oninsulator vertical double gate mosfet device

    Directory of Open Access Journals (Sweden)

    K.E. Kaharudin


    Full Text Available This paper presents a study of optimizing input process parameters on leakage current (IOFF in silicon-on-insulator (SOI Vertical Double-Gate,Metal Oxide Field-Effect-Transistor (MOSFET by using L36 Taguchi method. The performance of SOI Vertical DG-MOSFET device is evaluated in terms of its lowest leakage current (IOFF value. An orthogonal array, main effects, signal-to-noise ratio (SNR and analysis of variance (ANOVA are utilized in order to analyze the effect of input process parameter variation on leakage current (IOFF. Based on the results, the minimum leakage current ((IOFF of SOI Vertical DG-MOSFET is observed to be 0.009 nA/µm or 9 ρA/µm while keeping the drive current (ION value at 434 µA/µm. Both the drive current (ION and leakage current (IOFF values yield a higher ION/IOFF ratio (48.22 x 106 for low power consumption application. Meanwhile, polysilicon doping tilt angle and polysilicon doping energy are recognized as the most dominant factors with each of the contributing factor effects percentage of 59% and 25%.

  17. Design and Measurement Methodology for a Sub-picoampere Current Digitiser

    CERN Document Server

    Voulgari, Evgenia; Anghinolfi, Francis; Krummenacher, François; Kayal, Maher


    This paper introduces some design and measurement techniques that were used in the design and the testing of an ASIC for ultra-low current sensing. The idea behind this paper is to present the limitations in sub-picoampere current measurements and demonstrate an ASIC that can accurately measure the different sources of leakage currents and the methodology of measuring. Then the leakage current can be subtracted or compensated in order to accurately measure the ultra-low current that is generated from a sensor/detector. The proposed ASIC can measure currents as low as -50 fA, a value well below similar ASIC implementations.

  18. A High-Speed Continuous Recording High Flow Gas Sampler for Measuring Methane Emissions from Pneumatic Devices at Oil and Natural Gas Production Facilities (United States)

    Ferrara, T.; Howard, T. M.


    Studies attempting to reconcile facility level emission estimates of sources at oil and gas facilities with basin wide methane flux measurements have had limited success. Pneumatic devices are commonly used at oil and gas production facilities for process control or liquid pumping. These devices are powered by pressurized natural gas from the well, so they are known methane sources at these sites. Pneumatic devices are estimated to contribute 14% to 25% of the total greenhouse gas emissions (GHG) from production facilities. Measurements of pneumatic devices have shown that malfunctioning or poorly maintained control systems may be emitting significantly more methane than currently estimated. Emission inventories for these facilities use emission factors from EPA that are based on pneumatic device measurements made in the early 1990's. Recent studies of methane emissions from production facilities have attempted to measure emissions from pneumatic devices by several different methods. These methods have had limitations including alteration of the system being measured, the inability to distinguish between leaks and venting during normal operation, or insufficient response time to account of the time based emission events. We have developed a high speed recording high flow sampler that is capable of measuring the transient emissions from pneumatic devices. This sampler is based on the well-established high flow measurement technique used in oil and gas for quantifying component leak rates. In this paper we present the results of extensive laboratory controlled release testing. Additionally, test data from several field studies where this sampler has been used to measure pneumatic device emissions will be presented.

  19. The current interruption process in vacuum analysis of the currents and voltages of current-zero measurements

    NARCIS (Netherlands)

    van Lanen, E.P.A.


    The circuit breaker helps protecting vulnerable equipment in a power network from hazardous short-circuit currents by isolating a fault, when it occurs. They perform this task by extinguishing a plasma arc that appears as soon as the breaker's contacts separate, and through which the short-circuit c

  20. The current interruption process in vacuum analysis of the currents and voltages of current-zero measurements

    NARCIS (Netherlands)

    van Lanen, E.P.A.


    The circuit breaker helps protecting vulnerable equipment in a power network from hazardous short-circuit currents by isolating a fault, when it occurs. They perform this task by extinguishing a plasma arc that appears as soon as the breaker's contacts separate, and through which the short-circuit

  1. Photovoltaic material and device measurements workshop: focus on polycrystalline thin film cells

    Energy Technology Data Exchange (ETDEWEB)



    The general purpose of the workshop was to accelerate the development of thin film solar cells by improving the versatility and reliability of material and device measurement techniques. Papers were presented under the following sessions: structural/chemical session; optical/electro-optical session; charge transport session; and poster session. Each paper was processed for EDB.

  2. 77 FR 17457 - Work Group on Alternative Test Methods for Commercial Measuring Devices (United States)


    ... National Institute of Standards and Technology Work Group on Alternative Test Methods for Commercial...: The National Institute of Standards and Technology (NIST) is forming a Work Group (WG) to examine alternative methods for testing the accuracy of commercial measuring devices including, but not limited...

  3. A Simple Device for Measuring Static Compliance of Lung-Thorax Combine (United States)

    Sircar, Sabyasachi


    Explaining the concept of lung compliance remains a challenge to the physiology teacher because it cannot be demonstrated easily in human subjects and all attempts until now have used only simulation models. A simple device is described in the present article to measure the compliance of the "lung-thorax" combine in human subjects with…

  4. Design and Study of Data Acquisition System for Pulsed γ Dose Measurement Device

    Institute of Scientific and Technical Information of China (English)

    DOU; Yu-ling; YANG; Shao-hua; ZHANG; Guo-guang


    <正>A data acquisition system for online pulsed gamma dose measurement device was designed and developed (Fig. 1), and its performance was tested. The results show that the data acquisition system in both the continued and pulsed input, output electric charges and input energy have a good linear relationship. Experiments were done respectively on the XRS-3 pulsed source and re-frequency

  5. The two-probe device for automatic measurement of the reflection coefficient

    Directory of Open Access Journals (Sweden)

    Л.Я. Ільницький


    Full Text Available  The two-probe device for automatic measurement of the reflection coefficient in the HF range is proposed and analyzed. The main parts in the instrument control system are the sum-and-difference bridge and the microprocessor.

  6. Test-Retest Reliability of Respiratory Resistance Measured with the Airflow Perturbation Device (United States)

    Gallena, Sally K.; Solomon, Nancy Pearl; Johnson, Arthur T.; Vossoughi, Jafar; Tian, Wei


    Purpose: In this study, the authors aimed to determine reliability of the airflow perturbation device (APD) to measure respiratory resistance within and across sessions during resting tidal (RTB) and postexercise breathing in healthy athletes, and during RTB across trials within a session in athletes with paradoxical vocal fold motion (PVFM)…

  7. A Simple Device for Measuring Static Compliance of Lung-Thorax Combine (United States)

    Sircar, Sabyasachi


    Explaining the concept of lung compliance remains a challenge to the physiology teacher because it cannot be demonstrated easily in human subjects and all attempts until now have used only simulation models. A simple device is described in the present article to measure the compliance of the "lung-thorax" combine in human subjects with…

  8. Novel Crosstalk Measurement Method for Multi-Core Fiber Fan-In/Fan-Out Devices

    DEFF Research Database (Denmark)

    Ye, Feihong; Ono, Hirotaka; Abe, Yoshiteru;


    We propose a new crosstalk measurement method for multi-core fiber fan-in/fan-out devices utilizing the Fresnel reflection. Compared with the traditional method using core-to-core coupling between a multi-core fiber and a single-mode fiber, the proposed method has the advantages of high reliabili...

  9. Findings toward the miniaturization of a laser speckle contrast device for skin roughness measurements (United States)

    Louie, Daniel C.; Tchvialeva, Lioudmilla; Zeng, Haishan; Lee, Tim K.


    Skin roughness is an important parameter in the characterization of skin and skin lesions, particularly for the purposes of skin cancer detection. Our group had previously constructed a laser speckle device that can detect the roughness in microrelief of the skin. This paper reports on findings made for the further miniaturization of our existing portably-sized device. These findings include the feasibility of adopting a laser diode without temperature control, and the use of a single CCD camera for detection. The coherence length of a laser is a crucial criterion for speckle measurements as it must be within a specific range. The coherence length of a commercial grade 405 nm laser diode was found to be of an appropriate length. Also, after a short warm-up period the coherence length of the laser was found to remain relatively stable, even without temperature control. Although the laser's temperature change during operation may affect its power output and the shape of its spectrum, these are only minor factors in speckle contrast measurements. Our second finding covers a calibration curve to relate speckle measurements to roughness using only parallel polarization from one CCD camera. This was created using experimental data from skin phantoms and tested on in-vivo skin. These improvements are important steps forward in the ongoing development of the laser speckle device, especially towards a clinical device to measure skin roughness and evaluate skin lesions.

  10. Steady-state and non-steady state operation of counter-current chromatography devices. (United States)

    Kostanyan, Artak E; Ignatova, Svetlana N; Sutherland, Ian A; Hewitson, Peter; Zakhodjaeva, Yulya A; Erastov, Andrey A


    Different variants of separation processes based on steady-state (continuous sample loading) and non-steady state (batch) operating modes of CCC columns have been analyzed and compared. The analysis is carried out on the basis of the modified equilibrium cell model, which takes into account both mechanisms of band broadening - interphase mass transfer and axial mixing. A full theoretical treatment of the intermittent counter-current chromatography with short sample loading time is performed. Analytical expressions are presented allowing the simulation of the intermittent counter-current chromatography separations for various experimental conditions. Chromatographic and extraction separations have been compared and advantages and disadvantages of the two methods have been evaluated. Further technical development of the CCC machines to implement counter-current extraction separations is considered.

  11. Current Fluctuation Measurements of Amperometric Gas Sensors Constructed with Three Different Technology Procedures

    Directory of Open Access Journals (Sweden)

    Sedlak Petr


    Full Text Available Electrochemical amperometric gas sensors represent a well-established and versatile type of devices with unique features: good sensitivity and stability, short response/recovery times, and low power consumption. These sensors operate at room temperature, and therefore have been applied in monitoring air pollutants and detection of toxic and hazardous gases in a number of areas. Some drawbacks of classical electrochemical sensors are overcome by the solid polymer electrolyte (SPE based on ionic liquids. This work presents evaluation of an SPE-based amperometric sensor from the point of view of current fluctuations. The sensor is based on a novel three-electrode sensor platform with solid polymer electrolytes containing ionic liquid for detection of nitrogen dioxide − a highly toxic gas that is harmful to the environment and presenting a possible threat to human health even at low concentrations. The paper focuses on using noise measurement (electric current fluctuation measurement for evaluation of electrochemical sensors which were constructed by different fabrication processes: (i lift-off and drop-casting technology, (ii screen printing technology on a ceramic substrate and (iii screen printing on a flexible substrate.

  12. MSE measurements for sawtooth and non-inductive current drive studies in KSTAR (United States)

    Ko, J.; Park, H.; Bea, Y. S.; Chung, J.; Jeon, Y. M.


    Two major topics where the measurement of the magnetic-field-line rotational transform profiles in toroidal plasma systems include the long-standing issue of complete versus incomplete reconnection model of the sawtooth instability and the issue with future reactor-relevant tokamak devices in which non-inductive steady state current sustainment is essential. The motional Stark effect (MSE) diagnostic based on the photoelastic-modulator (PEM) approach is one of the most reliable means to measure the internal magnetic pitch, and thus the rotational transform, or its reciprocal (q), profiles. The MSE system has been commissioned for the Korea Superconducting Tokamak Advanced Research (KSTAR) along with the development of various techniques to minimize systematic offset errors such as Faraday rotation and mis-alignment of the bandpass filters. The diagnostic has revealed the central q is well correlated with the sawtooth oscillation, maintaining its value above unity during the MHD quiescent period and that the response of the q profile to external current drive such as electron cyclotron wave injection not only involves the local change of the pitch angle gradient but also a significant shift of the magnetic topology due to the wave energy transport. Work supported by the Ministry of Science, ICT and Future Planning, Korea.

  13. Statistical inference for the within-device precision of quantitative measurements in assay validation. (United States)

    Liu, Jen-Pei; Lu, Li-Tien; Liao, C T


    Intermediate precision is one of the most important characteristics for evaluation of precision in assay validation. The current methods for evaluation of within-device precision recommended by the Clinical Laboratory Standard Institute (CLSI) guideline EP5-A2 are based on the point estimator. On the other hand, in addition to point estimators, confidence intervals can provide a range for the within-device precision with a probability statement. Therefore, we suggest a confidence interval approach for assessment of the within-device precision. Furthermore, under the two-stage nested random-effects model recommended by the approved CLSI guideline EP5-A2, in addition to the current Satterthwaite's approximation and the modified large sample (MLS) methods, we apply the technique of generalized pivotal quantities (GPQ) to derive the confidence interval for the within-device precision. The data from the approved CLSI guideline EP5-A2 illustrate the applications of the confidence interval approach and comparison of results between the three methods. Results of a simulation study on the coverage probability and expected length of the three methods are reported. The proposed method of the GPQ-based confidence intervals is also extended to consider the between-laboratories variation for precision assessment.

  14. SEMICONDUCTOR DEVICES Effect of collector bias current on the linearity of common-emitter BJT amplifiers (United States)

    Kun, Li; Jianfu, Teng; Xiuwei, Xuan


    Using a Volterra series, an explicit formula is derived for the connection between input 3rd-order intercept point and collector bias current (ICQ) in a common-emitter bipolar junction transistor amplifier. The analysis indicates that the larger ICQ is, the more linear the amplifier is. Furthermore, this has been verified by experiment. This study also integrates a method called dynamic bias current for expanding the dynamic range of an LNA (low noise amplifier) as an application of the analysis result obtained above. IMR3 (3rd-order intermodulation rate) is applied to evaluate the LNA's performance with and without adopting this method in this study.

  15. Ultrasonic measurement device for the characterization of microbiological and biochemical processes in liquid media (United States)

    Elvira, L.; Durán, C.; Sierra, C.; Resa, P.; Montero de Espinosa, F.


    A measuring device for the characterization of liquid media based on the propagation of ultrasonic waves is presented. It is a four-channel system especially designed for monitoring microbiological and biochemical processes. The liquid samples are placed in commercial glass bottles which can be sterilized. The bottles have inlet and outlet tubes, which can be used for adding substances or extracting samples during the measuring process without interruption. Magnetic stirring can be used to keep the liquid agitated for homogenization purposes. Thermal control elements assure the temperature stability during the measurement. The liquid characterization is based on the detection of amplitude and time-of-flight changes in the sample under study. The main features, operation and performance of this ultrasonic device are analysed in this work, and some measurements and preliminary results are shown.

  16. On the problems of stability and durability of field-emission current sources for electrovacuum devices (United States)

    Yakunin, Alexander N.; Aban'shin, Nikolay P.; Akchurin, Garif G.; Akchurin, Georgy G.; Avetisyan, Yuri A.


    The results of the practical implementation of the concept of field-emission current source with high average current density of 0.1-0.3 A-cm-2 are shown. The durability of cathode samples at a level of 6000 hours is achieved under conditions of technical vacuum. A phenomenological model is suggested that describes the tunneling of both equilibrium and nonequilibrium electrons in a vacuum from the zone of concentration of electrostatic field. Conditions are discussed as the resulting increase in the emission current due to the connection mechanism of the photoelectric effect is thermodynamically favorable, that is not accompanied by an undesirable increase in the temperature of the local emission zone. It is shown that to ensure stability and durability of the cathode is also important to limit the concentration of equilibrium carriers using composite structures «DLC film on Mo substrate." This helps to reduce the criticality of the CVC. A possible alternative is to use a restrictive resistance in the cathode. However, this increases the heat losses and thus decreases assembly efficiency. The results of experimental studies of the structure showing the saturation of photoemission current component with an increase in operating voltage. This fact suggests the existence of an effective mechanism for control of emission at constant operating voltage. This is fundamentally important for the stabilization of field emission cathode, providing a reliability and durability. The single-photon processes and the small thickness DLC films (15-20 nm) provide high-speed process of control.

  17. Measurements of Elastic Moduli of Silicone Gel Substrates with a Microfluidic Device


    Edgar Gutierrez; Alex Groisman


    Thin layers of gels with mechanical properties mimicking animal tissues are widely used to study the rigidity sensing of adherent animal cells and to measure forces applied by cells to their substrate with traction force microscopy. The gels are usually based on polyacrylamide and their elastic modulus is measured with an atomic force microscope (AFM). Here we present a simple microfluidic device that generates high shear stresses in a laminar flow above a gel-coated substrate and apply the d...

  18. Current Consumption Measurements with a Carrier Aggregation Smartphone

    DEFF Research Database (Denmark)

    Sanchez-Mejias, Rafael; Guo, Yu; Lauridsen, Mads


    Carrier Aggregation (CA) is introduced in LTE release 10 to improve data rates by allowing the User Equipment (UE) to receive data on more than one LTE carrier. The related increased complexity is expected to affect the UE current consumption, but yet no empirical evaluation has been published on...

  19. Microcontroller based system for electrical breakdown time delay measurement in gas-filled devices (United States)

    Pejović, Milić M.; Denić, Dragan B.; Pejović, Momčilo M.; Nešić, Nikola T.; Vasović, Nikola


    This paper presents realization of a digital embedded system for measuring electrical breakdown time delay. The proposed system consists of three major parts: dc voltage supply, analog subsystem, and a digital subsystem. Any dc power source with the range from 100 to 1000 V can be used in this application. The analog subsystem should provide fast and accurate voltage switching on the testing device as well as transform the signals that represent the voltage pulse on the device and the device breakdown into the form suitable for detection by a digital subsystem. The insulated gate bipolar transistor IRG4PH40KD driven by TC429 MOSFET driver is used for high voltage switching on the device. The aim of a digital subsystem is to detect the signals from the analog subsystem and to measure the elapsed time between their occurrences. Moreover, the digital subsystem controls various parameters that influence time delay and provides fast data storage for a large number of measured data. For this propose, we used the PIC18F4550 microcontroller with a full-speed compatible universal serial bus (USB) engine. Operation of this system is verified on different commercial and custom made gas devices with different structure and breakdown mechanisms. The electrical breakdown time delay measurements have been carried out as a function of several parameters, which dominantly influence electrical breakdown time delay. The obtained results have been verified using statistical methods, and they show good agreement with the theory. The proposed system shows good repeatability, sensitivity, and stability for measuring the electrical breakdown time delay.

  20. Microcontroller based system for electrical breakdown time delay measurement in gas-filled devices

    Energy Technology Data Exchange (ETDEWEB)

    Pejovic, Milic M.; Denic, Dragan B.; Pejovic, Momcilo M.; Nesic, Nikola T.; Vasovic, Nikola [Faculty of Electronic Engineering, University of Nis, Aleksandra Medvedeva 14, 18000 Nis (Serbia)


    This paper presents realization of a digital embedded system for measuring electrical breakdown time delay. The proposed system consists of three major parts: dc voltage supply, analog subsystem, and a digital subsystem. Any dc power source with the range from 100 to 1000 V can be used in this application. The analog subsystem should provide fast and accurate voltage switching on the testing device as well as transform the signals that represent the voltage pulse on the device and the device breakdown into the form suitable for detection by a digital subsystem. The insulated gate bipolar transistor IRG4PH40KD driven by TC429 MOSFET driver is used for high voltage switching on the device. The aim of a digital subsystem is to detect the signals from the analog subsystem and to measure the elapsed time between their occurrences. Moreover, the digital subsystem controls various parameters that influence time delay and provides fast data storage for a large number of measured data. For this propose, we used the PIC18F4550 microcontroller with a full-speed compatible universal serial bus (USB) engine. Operation of this system is verified on different commercial and custom made gas devices with different structure and breakdown mechanisms. The electrical breakdown time delay measurements have been carried out as a function of several parameters, which dominantly influence electrical breakdown time delay. The obtained results have been verified using statistical methods, and they show good agreement with the theory. The proposed system shows good repeatability, sensitivity, and stability for measuring the electrical breakdown time delay.

  1. Microcontroller based system for electrical breakdown time delay measurement in gas-filled devices. (United States)

    Pejović, Milić M; Denić, Dragan B; Pejović, Momčilo M; Nešić, Nikola T; Vasović, Nikola


    This paper presents realization of a digital embedded system for measuring electrical breakdown time delay. The proposed system consists of three major parts: dc voltage supply, analog subsystem, and a digital subsystem. Any dc power source with the range from 100 to 1000 V can be used in this application. The analog subsystem should provide fast and accurate voltage switching on the testing device as well as transform the signals that represent the voltage pulse on the device and the device breakdown into the form suitable for detection by a digital subsystem. The insulated gate bipolar transistor IRG4PH40KD driven by TC429 MOSFET driver is used for high voltage switching on the device. The aim of a digital subsystem is to detect the signals from the analog subsystem and to measure the elapsed time between their occurrences. Moreover, the digital subsystem controls various parameters that influence time delay and provides fast data storage for a large number of measured data. For this propose, we used the PIC18F4550 microcontroller with a full-speed compatible universal serial bus (USB) engine. Operation of this system is verified on different commercial and custom made gas devices with different structure and breakdown mechanisms. The electrical breakdown time delay measurements have been carried out as a function of several parameters, which dominantly influence electrical breakdown time delay. The obtained results have been verified using statistical methods, and they show good agreement with the theory. The proposed system shows good repeatability, sensitivity, and stability for measuring the electrical breakdown time delay.

  2. Devices for measuring the capacitance of micromechanical sensors of mobile robots navigation systems and its deviation from the nominal value

    Directory of Open Access Journals (Sweden)

    Rudyk A.V.


    Full Text Available The article describes methods of constructing devices for measuring the capacitance of micromechanical sensors (accelerometers and gyros mobile robots navigation systems and its deviation from the nominal value. A modified diagram of a sigma-delta modulator is offered. It realizes a direct connection capacitive sensor connection to the sigma-delta converter, as a result increased resolution, accuracy and linearity of the conversion. This interface is insensitive to the value of capacitance between the sensor leads and common wire or leakage current to a common wire. Variants of expansion as the nominal of the test capacity and the range of conversion of the relative deviation of the nominal capacity using two integrators are offered. The versions of circuit implementation devices for measuring the capacitance deviation of a micromechanical sensor from the nominal value are designed on the basis of the completed integrated circuit AD7745 / AD7746 and AD7747 of Analog Devices, CAV414 / 424 firm Analog Microelectronics and precision analog microcontroller ADuCM360 / CM361 company ARM Limited.

  3. Analysis of Uncertainty in a Middle-Cost Device for 3D Measurements in BIM Perspective. (United States)

    Sánchez, Alonso; Naranjo, José-Manuel; Jiménez, Antonio; González, Alfonso


    Medium-cost devices equipped with sensors are being developed to get 3D measurements. Some allow for generating geometric models and point clouds. Nevertheless, the accuracy of these measurements should be evaluated, taking into account the requirements of the Building Information Model (BIM). This paper analyzes the uncertainty in outdoor/indoor three-dimensional coordinate measures and point clouds (using Spherical Accuracy Standard (SAS) methods) for Eyes Map, a medium-cost tablet manufactured by e-Capture Research & Development Company, Mérida, Spain. To achieve it, in outdoor tests, by means of this device, the coordinates of targets were measured from 1 to 6 m and cloud points were obtained. Subsequently, these were compared to the coordinates of the same targets measured by a Total Station. The Euclidean average distance error was 0.005-0.027 m for measurements by Photogrammetry and 0.013-0.021 m for the point clouds. All of them satisfy the tolerance for point cloud acquisition (0.051 m) according to the BIM Guide for 3D Imaging (General Services Administration); similar results are obtained in the indoor tests, with values of 0.022 m. In this paper, we establish the optimal distances for the observations in both, Photogrammetry and 3D Photomodeling modes (outdoor) and point out some working conditions to avoid in indoor environments. Finally, the authors discuss some recommendations for improving the performance and working methods of the device.

  4. A new 3D levitation force measuring device for REBCO bulk superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Chen, S.L. [School of Physics, Shaanxi Normal University, Xi’an 710062 (China); Yang, W.M., E-mail: [School of Physics, Shaanxi Normal University, Xi’an 710062 (China); Li, J.W.; Yuan, X.C. [School of Physics, Shaanxi Normal University, Xi’an 710062 (China); Ma, J. [School of Physics, Shaanxi Normal University, Xi’an 710062 (China); Department of Physics, Qinghai Normal University, Xining 810008 (China); Wang, M. [School of Physics, Shaanxi Normal University, Xi’an 710062 (China)


    Highlights: •A new 3D levitation force measuring device has been designed and constructed. •It can measure the 3D real-time interaction force simultaneously and directly. •Performance, accuracy and effectiveness has been demonstrate by tests. -- Abstract: A new 3D levitation force measuring device for ReBa{sub 2}Cu{sub 3}O{sub 7−x} (REBCO) bulk superconductors has been designed and constructed. Three pull pressure load cells are orthogonally set on a fixing bracket to test the interaction force between a bulk superconductor and a magnet in three dimensions. To realize the simple, rapid and accurate measurement of the levitation force, a non-magnetic hollow cylinder flange, three pull pressure load cells, a piece of iron plate, a NbFeB permanent magnet (PM) and some steel balls are elaborately constructed with the fixing bracket, thus the magnet or REBCO bulk superconductor can be well and rigidly connected with the load cells, and the mutual interference from the three pull pressure load cells can be effectively avoided during the levitation force measuring processes. This device can be used to measure the interaction (or levitation) force between a superconductor and a magnet, that between a magnet and a magnet, or the magnetic force among magnetic materials in three dimensions.

  5. Analysis of Uncertainty in a Middle-Cost Device for 3D Measurements in BIM Perspective (United States)

    Sánchez, Alonso; Naranjo, José-Manuel; Jiménez, Antonio; González, Alfonso


    Medium-cost devices equipped with sensors are being developed to get 3D measurements. Some allow for generating geometric models and point clouds. Nevertheless, the accuracy of these measurements should be evaluated, taking into account the requirements of the Building Information Model (BIM). This paper analyzes the uncertainty in outdoor/indoor three-dimensional coordinate measures and point clouds (using Spherical Accuracy Standard (SAS) methods) for Eyes Map, a medium-cost tablet manufactured by e-Capture Research & Development Company, Mérida, Spain. To achieve it, in outdoor tests, by means of this device, the coordinates of targets were measured from 1 to 6 m and cloud points were obtained. Subsequently, these were compared to the coordinates of the same targets measured by a Total Station. The Euclidean average distance error was 0.005–0.027 m for measurements by Photogrammetry and 0.013–0.021 m for the point clouds. All of them satisfy the tolerance for point cloud acquisition (0.051 m) according to the BIM Guide for 3D Imaging (General Services Administration); similar results are obtained in the indoor tests, with values of 0.022 m. In this paper, we establish the optimal distances for the observations in both, Photogrammetry and 3D Photomodeling modes (outdoor) and point out some working conditions to avoid in indoor environments. Finally, the authors discuss some recommendations for improving the performance and working methods of the device. PMID:27669245

  6. Contactless graphene conductance measurements: the effect of device fabrication on terahertz time-domain spectroscopy

    DEFF Research Database (Denmark)

    Mackenzie, David; Buron, Jonas Christian Due; Bøggild, Peter


    We perform contactless full-wafer maps of the electrical conductance of a 4-inch wafer of single-layer CVD graphene using terahertz time-domain spectroscopy both before and after deposition of metal contacts and fabrication of devices via laser ablation. We find that there is no significant change...... in the measured conductance of graphene before and after device fabrication. We also show that precise terahertz time-domain spectroscopy can be performed when the beam spot is at sufficient distance (>1.2 mm) from metal contacts....

  7. Surfzone currents at Candolim and Miramar beaches of Goa, India: measurements and comparisons

    Digital Repository Service at National Institute of Oceanography (India)

    Yadhunath, E.M.; JayaKumar, S.; Jishad, M.; Gowthaman, R.; Rajasekaran, C.; Pednekar, P.S.

    Measurements in the surfzone current are often carried out using Acoustic Doppler Velocimeters, Electromagnetic current meters, as well as visual observations based on floats A simple approach is used to install an Aanderaa current meter in water...

  8. 'Leak Current' correction for critical current measurement of no-insulation HTS coil

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jung Bin [Laboratoire National des Champs Magnétiques Intenses, CNRS, Grenoble (France); Hahn, Seung Yong [Dept. of Electrical and Computer Engineering, Seoul National University, Seoul (Korea, Republic of)


    Discrepancy between a power supply current and an actual “spiral” coil current makes the conventional 4-probe measurement of a critical current (I{sub c}) of a no-insulation (NI) high temperature superconductor (HTS) coil inaccurate and time-consuming. This paper presents a fast and accurate approach for I{sub c} measurement of NI HTS coils. With an NI HTS coil energized at a constant ramping rate, a complete analytic expression for the spiral coil current was obtained from a first-order partial differential equation that derived from an equivalent circuit model of the NI coil. From the analytic solution, both spiral coil current and radial leak current can be obtained simultaneously, which enables fast and accurate measurement of the NI coil I{sub c}. To verify the proposed approach, an NI double-pancake (DP) coil, wound with GdBCO tapes of 6 mm × 0.1 mm, was constructed and its Ic was repeatedly measured with various ramping rates in a bath of liquid nitrogen at 77 K. The measured results agreed well with the calculated ones, which validates the proposed approach to measure I{sub c} of an NI HTS coil.

  9. TID-dependent current measurements of IBL readout chips

    Energy Technology Data Exchange (ETDEWEB)

    Dette, Karola [TU Dortmund, Experimentelle Physik IV (Germany); CERN (Switzerland); Collaboration: ATLAS Pixel-Collaboration


    The ATLAS detector consists of several subsystems with a hybrid pixel detector as the innermost component of the tracking system. The pixel detector has been composed of three layers of silicon sensor assemblies during the first data taking run of the LHC and has been upgraded with a new 4th layer, the so-called Insertable B-Layer (IBL), in summer 2014. Each silicon sensor of the IBL is connected to a Front End readout chip (FE-I4) via bump bonds. During the first year of data taking an increase of the LV current produced by the readout chips was observed. This increase could be traced back to radiation damage inside the silicon. The dependence of the current on the Total Ionizing Dose (TID) and temperature has been tested with X-ray irradiations and will be presented in this talk.

  10. Aluminum and boron nuclear quadrupole resonance with a direct current superconducting quantum interference device (United States)

    Connor, C.; Chang, J.; Pines, A.


    We report the application of our dc SQUID (superconducting quantum interference device) spectrometer [C. Connor, J. Chang, and A. Pines, Rev. Sci. Instrum. 61, 1059(1990)] to nuclear quadrupole resonance (NQR) studies of aluminum-27, and boron-11 in crystalline and glassy solids. Our results give e2qQ/h=2.38 MHz and η=0.0 for α-Al2O3 at 4.2 K. For the natural mineral petalite (LiAlSi4O10), we obtain e2qQ/h=4.56 MHz and η=0.47. The quadrupole resonance frequency is 1467 kHz in boron nitride, and in the vicinity of 1300 kHz for various borates in the B2O3ṡxH2O system. The distribution of boron environments in a B2O3 glass gives rise to a linewidth of about 80 kHz in the SQUID detected resonance.

  11. State-variable control of shunt FACTS devices using phasor measurements

    Energy Technology Data Exchange (ETDEWEB)

    Machowski, J. [Warsaw University of Technology, Instytut Elektroenergetyki, Koszykowa 75, 00-662 Warszawa (Poland); Bialek, J.W. [University of Edinburgh, School of Engineering and Electronics, King' s Buildings, Mayfield Road, Edinburgh EH9 3JL (United Kingdom)


    This paper addresses the problem of state-variable stabilizing control of power system using shunt FACTS devices. This stabilizing control is activated in the transient state of a power system and is supplementary with respect to the main steady-state control of a FACTS device. Stabilizing control laws have been derived for a non-linear multi-machine system model using direct Lyapunov method with the aim to maximize the rate of energy dissipation during power swings and therefore maximization of damping. The proposed control strategy is executed by a non-linear multi-loop controller with rotor angles and speed deviations of synchronous generators used as the input signals. The input signals, obtained from a phasor measurement system, are necessary only from a small area around the controlled shunt FACTS device. Validity of the proposed state-variable control has been confirmed by computer simulation for a small multi-machine test system. (author)

  12. Jules Horowitz Reactor Project- Fuel irradiation device, innovative instrumentation proposal for experimental phenomena real time measurement

    Energy Technology Data Exchange (ETDEWEB)

    Gaillot, Stephane; Cheymol, Guy [CEA, Paris (France)


    The fuel irradiation devices used for the tests or rods allow reproducing at small scales the conditions of the studied nuclear reactors (as LWR type). During the irradiation phase, the tested fuel rod can be stressed due to thermal, mechanical, nuclear effects which can modify its geometry (dilatation, swelling effects). After the test, the return to normal conditions can have as consequence the disappearance of the phenomenon or give access to partial information (final deformation). Generally, to follow the phenomena related to the irradiation phase, the experimental rod contained in the test device is instrumented with thermocouples and LVDT. As complement of this instrumentation, new sensors using innovating technologies are studied (deformation sensor integrating optical fibres). Through the example of a fuel irradiation device foreseen for the JHR, this paper aims to describe the present development of an innovating instrumentation with the objective to measure, in real time and under flux, the fuel rod deformation phenomena during a ramp test.

  13. Device for measurement of power and shape of radio frequency pulses in nuclear magnetic resonance (United States)

    Pfeffer, M.; Řezníček, R.; Křišťan, P.; Štěpánková, H.


    A design of an instrument to measure the power and shape of radio frequency (RF) pulses operating in a broad frequency range is described. The device is capable of measuring the pulse power up to 500 W of both CW and extremely short (˜1 μs) RF pulses of arbitrary period. The pulse envelope can be observed on a logarithmic scale on a corresponding instrument output using an inexpensive storage oscilloscope. The instrument consists of a coaxial measurement head, the RF processing circuits and an AD conversion and display unit. The whole device is based on widely available integrated circuits; thus, good reproducibility and adaptability of the design is ensured. Since the construction is intended to be used in particular (but not solely) in nuclear magnetic resonance spectroscopy, we found it useful to provide a demonstration of two typical usage scenarios. Other application fields may comprise magnetic resonance imaging, radar and laser technology, power amplifier testing, etc.

  14. Some aspects of achieving an ultimate accuracy during insertion device magnetic measurements by a Hall probe. (United States)

    Vasserman, I B; Strelnikov, N O; Xu, J Z


    An extensive test of a new Senis 2-axis Hall probe was done at the Advanced Photon Source using the Undulator A device and calibration system. This new probe has clear advantages compared with previously used Bell and Sentron Hall probes: very stable zero offset (less than the noise of 0.026 G) and compensated planar Hall effect. It can be used with proper calibration even for first and second field integral measurements. A comparison with reference measurements by long stretched coil shows that the difference in the first field integral measurement results for a 2.4-m-long Undulator A device is between 17 G cm for the best of four Hall probes used for the test and 51 G cm for the worst of them for all gap ranges from 10.5 mm to 150 mm.

  15. Loss-tolerant measurement-device-independent quantum random number generation (United States)

    Cao, Zhu; Zhou, Hongyi; Ma, Xiongfeng


    Quantum random number generators (QRNGs) output genuine random numbers based upon the uncertainty principle. A QRNG contains two parts in general—a randomness source and a readout detector. How to remove detector imperfections has been one of the most important questions in practical randomness generation. We propose a simple solution, measurement-device-independent QRNG, which not only removes all detector side channels but is robust against losses. In contrast to previous fully device-independent QRNGs, our scheme does not require high detector efficiency or nonlocality tests. Simulations show that our protocol can be implemented efficiently with a practical coherent state laser and other standard optical components. The security analysis of our QRNG consists mainly of two parts: measurement tomography and randomness quantification, where several new techniques are developed to characterize the randomness associated with a positive-operator valued measure.

  16. Use of a Computed Tomography Based Approach to Validate Noninvasive Devices to Measure Rotational Knee Laxity. (United States)

    Neumann, Simon; Maas, Stefan; Waldmann, Danièle; Ricci, Pierre-Louis; Zürbes, Arno; Arnoux, Pierre-Jean; Walter, Frédéric; Kelm, Jens


    The purpose of this study is to validate a noninvasive rotational knee laxity measuring device called "Rotameter P2" with an approach based on Computed Tomography (CT). This CT-approach using X-rays is hence invasive and can be regarded as a precise reference method that may also be applied to similar devices. An error due to imperfect femur fixation was observed but can be neglected for small torques. The most significant estimation error is due to the unavoidable soft tissues rotation and hence flexibility in the measurement chain. The error increases with the applied torque. The assessment showed that the rotational knee angle measured with the Rotameter is still overestimated because of thigh and femur displacement, soft tissues deformation, and measurement artefacts adding up to a maximum of 285% error at +15 Nm for the Internal Rotation of female volunteers. This may be questioned if such noninvasive devices for measuring the Tibia-Femoral Rotation (TFR) can help diagnosing knee pathologies and investigate ligament reconstructive surgery.

  17. [An implantable micro-device using wireless power transmission for measuring aortic aneurysm sac pressure]. (United States)

    Guo, Xudong; Ge, Bin; Wang, Wenxing


    In order to detect endoleaks after endovascular aneurysm repair (EVAR), we developed an implantable micro-device based on wireless power transmission to measure aortic aneurysm sac pressure. The implantable micro-device is composed of a miniature wireless pressure sensor, an energy transmitting coil, a data recorder and a data processing platform. Power transmission without interconnecting wires is performed by a transmitting coil and a receiving coil. The coupling efficiency of wireless power transmission depends on the coupling coefficient between the transmitting coil and the receiving coil. With theoretical analysis and experimental study, we optimized the geometry of the receiving coil to increase the coupling coefficient. In order to keep efficiency balance and satisfy the maximizing conditions, we designed a closed loop power transmission circuit, including a receiving voltage feedback module based on wireless communication. The closed loop improved the stability and reliability of transmission energy. The prototype of the micro-device has been developed and the experiment has been performed. The experiments showed that the micro-device was feasible and valid. For normal operation, the distance between the transmitting coil and the receiving coil is smaller than 8cm. Besides, the distance between the micro-device and the data recorder is within 50cm.

  18. Gram-scale Plutonium Samples Measured by Experimental Device of Four Detectors Well-type Fast Neutron Coincidence Measurement

    Institute of Scientific and Technical Information of China (English)

    LIU; Guo-rong; LIANG; Qing-lei; LI; Jing-huai; LI; An-li


    Experimental device of four detectors well-type fast neutron coincidence measurement(see Fig.1)consists of four?127 mm×50.8 mm BC501A liquid scintillation detectors,DC271A digitizer and other circuits.Application program simultaneously acquires the waveform of each pulse output from each detector,and identifies each pulse from neutron or?particle by offline model,and gets their arrival timing.

  19. Measurement of change in the mechanical properties of burned skin to therapist intervention with a vacuum device. (United States)

    Gabriel, Vincent; Kowalske, Karen


    The currently available clinical scales used to describe healed burn wounds have limitations. Quantitative measurement of the outcomes from burn therapy treatment would be useful in planning clinical care, resource allocation and research. The purpose of this study was to observe the measurements of a portable materials testing device before and after burn therapist intervention for closed burns. A recording was taken using a hand-held vacuum device to measure deformation of the skin in the same location prior to and following a treatment session with a burn therapist in an outpatient clinic at a tertiary burn center. Twenty-eight subjects were recruited to the study. Statistically significant differences were noted in modulus and elasticity change between sheet and meshed split thickness autografts (p=0.0233). Positive change in modulus was correlated with increasing therapy time (R=0.46), specifically for meshed grafts (R=0.70). Positive change in modulus was noted in therapy time greater than 48 min. Quantitative measurement of the outcomes of burn therapies on the mechanical properties of healed burns is possible in an outpatient clinic setting. Improvement in the stiffness of burn scars was observed in treatment sessions that last at least 48 min. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

  20. A Novel Device for the Measurement of the Mechanical and Magnetic Axes of Superconducting Magnet Assemblies for Accelerators

    CERN Document Server

    Aznar, S; Fischer, F; Galbraith, Peter; García-Pérez, J; Goy, S; Mermillod, N; Peiro, G; Patti, G; Rathjen, C


    In the context of the LHC superconducting magnet production, especially for dipoles and quadrupoles due to their complexity, it is foreseen to perform acceptance tests, at an early production stage, to detect possible significant deviations from the design values. The knowledge of the magnetic field geometry is very important, especially for the main magnets. In order to get this information a new device has been conceived that measures the magnets at room temperature during different stages of construction. This device incorporates a sensitive measuring probe and an efficient data acquisition system because the coils are only powered at about 10-5 of the nominal D.C. current. It is dedicated to Quadrupole and Dipole (by using Quadrupole-Configured Dipole (QCD) transformation) magnets, but is also easily adaptable to higher order magnets (n = 3, 4 and 5) by specific orientation of the search coils. It is equipped with magnetic sensors (4 fixed tangential coils and AC excitation current for the magnet) and p...

  1. Air Flow Measurements During Medium-Voltage Load Current Interruptions


    Aanensen, Nina Sasaki; Runde, Magne


    Air has been considered a good alternative to SF6 as arc quenching medium for load break switchgear at medium voltage ratings. In this work, the air flow characteristics and influence from the electric arc have been studied for typical currents and over-pressures. The cooling air velocity is typically in the range 150 - 200 m/s and thus well below supersonic speed. The arc and the surrounding hot air severely affect the air flow pattern by causing clogging in the contact and nozzle region.

  2. Current assessment practice, personality measurement, and rorschach usage by psychologists. (United States)

    Musewicz, John; Marczyk, Geoffrey; Knauss, Linda; York, David


    In this study, we investigated current personality assessment practice and attitudes toward Rorschach (Exner, 2003) usage by 215 psychologists. We administered an Internet survey to members of the Society for Personality Assessment (SPA) and the American Psychological Association. Results were similar to those of past surveys, but the importance of using tests with strong psychometric properties was greater in this study. The majority of respondents reported using the Rorschach and supporting efforts to standardize and psychometrically validate the test. However, SPA members agreed more strongly than non-SPA members that the Rorschach is an effective test. Implications and directions for future research are discussed.

  3. Site Selection of Ocean Current Power Generation from Drifter Measurements (United States)


    Peter C. Chu2, Ruo-Shan Tseng3 4 5 1 Department of Marine Biotechnology and Resources, National Sun Yat-sen University, 6 Kaohsiung 80424, Taiwan...Besides 105 Kuroshio, there is a strong current with a velocity of 1.2 m s-1 in the South China Sea 106 along the coast of Vietnam. Fig. 4 shows the...more 128 than 500 m is also being developed for Kuroshio power plant near Taitung [9]. The sea 129 depth near Taitung is often more than 500 m. Thus

  4. Radiographic measurements of hallux angles: a review of current techniques. (United States)

    Srivastava, Subodh; Chockalingam, N; El Fakhri, Tarek


    Radiographic angles are commonly used in patients with hallux valgus deformity to assess the severity, plan surgery, assess outcome and compare results. Many different manual methods have been used, but are prone to error. More recently computer-assisted methods using software have become available. To review the different methods that have been used to measure radiographic angles in hallux valgus. A general literature search using relevant key words was undertaken using databases such as Medline, Embase, Cinahl and Cochrane Library. REVIEW FINDINGS AND DISCUSSION: The manual methods used are prone to errors. The reliability can be improved by using standardised radiographic technique and measurement technique using specific reference points. Computer-assisted methods using software, might improve reliability of measurements. Further studies are needed to assess if these methods are easy to use, and to compare different software's that are available. Specifically designed software for the foot might further improve the reliability of radiographic measurements in hallux valgus. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  5. Statistical design of unicompartmental tibial implants and comparison with current devices. (United States)

    Fitzpatrick, Clare; FitzPatrick, David; Lee, Jordan; Auger, Daniel


    This study defines, in the context of unicompartmental tibial replacement, the medial and lateral resection surfaces of 34 tibiae at a depth of 5 mm below the articular surface. Using statistical techniques, three optimal theoretical size and shape unicompartmental tibial designs, (i) implants of consistent shape in varying size (ii) implants symmetric about their ML axis; (iii) implants of varying size and shape, were constructed to best fit the population. Two currently available commercial implants, the Preservation Uni System (DePuy Orthopaedics Inc., Warsaw, IN) and the LCS Uni System (DePuy Orthopaedics Inc., Warsaw, IN), which were similar to types (i) and (ii) respectively, of the theoretical designs, were also included in the analysis. All implants, commercial and theoretical, were compared with one another to determine which implant designs gave the best cortical bone coverage on both the medial and lateral compartments. Of the commercial implants, the type (i) design fitted best, with an average of 67% of the implant edge lying on cortical bone, compared with 57% for the type (ii) implants. Of the theoretical implants, 72%, 67% and 76% of the implant edge lay on cortical bone for types (i), (ii) and (iii) designs, respectively, indicating that there is room for improvement in current implant designs to achieve better coverage in both the medial and lateral compartments combined.

  6. Current status of epibulbar anti-glaucoma drainage devices in glaucoma surgery. (United States)

    Thieme, Hagen


    The term "glaucoma" covers a heterogeneous group of progressive optic neuropathies that are accompanied by characteristic visual-field defects. Primary open-angle glaucoma, the most common type, progresses insidiously and causes blindness if untreated. All current forms of treatment aim at lowering the intraocular pressure (IOP) in patients whose IOP is elevated. The implantation of anti-glaucoma drainage systems is one of the available options for surgical treatment. This review is based on pertinent literature retrieved by a selective search, including glaucoma treatment guidelines from Germany and abroad. A paradigm shift is currently underway regarding the indications for the implantation of anti-glaucoma drainage systems. Trabeculectomy (a "fistulating" operation in which the aqueous humor is led out of the eye under the conjunctiva) is still considered the surgical gold standard, but drainage systems have been implanted with increasing frequency in recent years. Studies have shown that these systems are more likely to be beneficial the earlier they are implanted in the course of the patient's disease. Five-year follow-up data from the randomized, multicenter Tube Versus Trabeculectomy (TVT) study have now revealed that anti-glaucoma drainage systems are equivalent to trabeculectomy with respect to long-term IOP reduction, complication rates, and absolute and relative clinical success rates. Glaucoma is a major clinical and socio-economic problem whose surgical treatment increasingly involves the implantation of anti-glaucoma drainage systems.

  7. Power grid current harmonics mitigation drawn on low voltage rated switching devices with effortless control

    Energy Technology Data Exchange (ETDEWEB)

    Marques, Hugo S.; Anunciada, Victor; Borges, Beatriz V. [Power Electronics Group, Instituto de Telecomunicacoes, Lisbon (Portugal); Instituto Superior Tecnico - Universidade Tecnica de Lisboa, Lisbon (Portugal)


    The great majority of the existing hybrid active power filter solutions is normally focused in 3{phi} systems and, in general, concentrates its domain of application in specific loads with deterministic behavior. Because common use grids do not exhibit these characteristics, it is mandatory to develop solutions for more generic scenarios, encouraging the use of less classical hybrid solutions. In fact, due to the widely use of switch mode converters in a great variety of consumer electronics, the problematic of mains current harmonic mitigation is no longer an exclusive matter of 3{phi} systems. The contribution of this paper is to present a shunt hybrid active power filter topology, initially conceived to work in 1{phi} domestic grids, able to operate the inverter at a voltage rate that can be lower than 10% of the mains voltage magnitude, even under nonspecific working conditions. In addition, the results shown in this paper demonstrate that this topology can, without lack of generality, be suitable to medium voltage (1{phi} or 3{phi}) systems. A new control approach for the proposed topology is discussed in this paper. The control method exhibits an extremely simple architecture requiring single point current sensing only, with no need for any kind of reference. Its practical implementation can be fulfilled by using very few, common use, operational amplifiers. The principle of operation, design criteria, simulation predictions and experimental results are presented and discussed. (author)

  8. Development, validation and application of a device to measure e-cigarette users’ puffing topography (United States)

    Cunningham, Anthony; Slayford, Sandra; Vas, Carl; Gee, Jodie; Costigan, Sandra; Prasad, Krishna


    With the rapidly rising popularity and substantial evolution of electronic cigarettes (e-cigarettes) in the past 5–6 years, how these devices are used by vapers and consumers’ exposure to aerosol emissions need to be understood. We used puffing topography to measure directly product use. We adapted a cigarette puffing topography device for use with e-cigarettes. We performed validation using air and e-cigarette aerosol under multiple regimes. Consumer puffing topography was measured for 60 vapers provided with rechargeable “cig-a-like” or larger button-activated e-cigarettes, to use ad-libitum in two sessions. Under all regimes, air puff volumes were within 1 mL of the target and aerosol volumes within 5 mL for all device types, serving to validate the device. Vapers’ mean puff durations (2.0 s and 2.2 s) were similar with both types of e-cigarette, but mean puff volumes (52.2 mL and 83.0 mL) and mean inter-puff intervals (23.2 s and 29.3 s) differed significantly. The differing data show that product characteristics influence puffing topography and, therefore, the results obtained from a given e-cigarette might not read across to other products. Understanding the factors that affect puffing topography will be important for standardising testing protocols for e-cigarette emissions. PMID:27721496

  9. Device for the remote measurement of meteorological data based on Arduino platform

    Directory of Open Access Journals (Sweden)

    Tatović Mihajlo


    Full Text Available The aim of this paper is to present a realization of a device for displaying, monitoring, and recording non-electrical quantities relevant to the determination and examination of weather conditions. The main unit of this device is the Arduino platform, which controls digital sensors and the GSM module used for communication with user. To accomplish that, the GSM module responds to SMS with the current values of parameters that are being monitored. Also, it uses the GPS service, which allows an Internet connection and sends data back to the Web application. When the Web application receives these data, it processes them and saves them in a MySQL database. The device has the ability to record data on an SD card. A user application is created in C# programming language and allows reading of the recorded data from the SD card and handling of such data. All of results obtained by this device is compared with the results gathered by the Republic Hydrometeorogical Service of Serbia.

  10. Python Scripts for Automation of Current-Voltage Testing of Semiconductor Devices (FY17) (United States)


    to manually align the samples, so that the horizontal and vertical lattices are perfectly aligned with the stage left–right movement . Due to these...understand the axis movement portion of the code found in this technical report. When the user is facing the P200L, the following are true...on a diode or an Ids–Vds measurement on a high electron mobility transistor (HEMT). In lines 42 through 52, the script is simply checking to see

  11. The Current Methods of Measurement of Market Orientation


    Ing. Eva Tomaskova


    The article deals with the new trends in measurement of market orientation. Market orientation is one of the most investigated methods founded on marketing conception. Market orientation comes back in 90th of 20th century by workers Kohli and Jaworski and Narver and Slater. It is described as a method to contribute better managing of company by many researchers. These research studies involved definition of market orientation, impact market orientation on business performance, methods for mea...

  12. Measurements of knee rotation-reliability of an external device in vivo

    Directory of Open Access Journals (Sweden)

    Almquist Per O


    Full Text Available Abstract Background Knee rotation plays an important part in knee kinematics during weight-bearing activities. An external device for measuring knee rotation (the Rottometer has previously been evaluated for validity by simultaneous measurements of skeletal movements with Roentgen Stereometric Analysis (RSA. The aim of this study was to investigate the reliability of the device. Method The within-day and test-retest reliability as well as intertester reliability of the device in vivo was calculated. Torques of 3, 6 and 9 Nm and the examiner's apprehension of end-feel were used at 90°, 60° and 30° of knee flexion. Intraclass Correlation Coefficient 2,1 (ICC 2,1, 95% confidence interval (CI of ICC and 95% CI between test trials and examiners were used as statistical tests. Result ICC2,1 ranged from 0.50 to 0.94 at all three flexion angles at 6 and 9 Nm as well as end-feel, and from 0.22 to 0.75 at 3 Nm applied torque. Conclusion The Rottometer was a reliable measurement instrument concerning knee rotation at the three different flexion angles (90°, 60° and 30° with 6 and 9 Nm applied torques as well as the examiner's apprehension of end-feel. Three Nm was not a reliable torque. The most reliable measurements were made at 9 Nm applied torque.


    Directory of Open Access Journals (Sweden)

    A. N. Zakharova


    Full Text Available We have developed a device for measuring of parameters of thermal lens (TL in laser active elements under longitudinal diode pumping. The measurements are based on the probe beam method. This device allows one to determine sign and optical power of the lens in the principal meridional planes, its sensitivity factor with respect to the absorbed pump power and astigmatism degree, fractional heat loading which make it possible to estimate integral impact of the photoelastic effect to the formation of TL in the laser element. The measurements are performed in a linearly polarized light at the wavelength of 532 nm. Pumping of the laser element is performed at 960 nm that makes it possible to study laser materials doped with Yb3+ and (Er3+, Yb3+ ions. The precision of measurements: for sensitivity factor of TL – 0,1 m-1/W, for astigmatism degree – 0,2 m-1/W, for fractional heat loading – 5 %, for the impact of the photoelastic effect – 0,5 × 10-6 K-1. This device is used for characterization of thermal lens in the laser active element from an yttrium vanadate crystal, Er3+,Yb3+:YVO .

  14. Corneal biomechanical data and biometric parameters measured with Scheimpflug-based devices on normal corneas (United States)

    Nemeth, Gabor; Szalai, Eszter; Hassan, Ziad; Lipecz, Agnes; Flasko, Zsuzsa; Modis, Laszlo


    AIM To analyze the correlations between ocular biomechanical and biometric data of the eye, measured by Scheimpflug-based devices on healthy subjects. METHODS Three consecutive measurements were carried out using the corneal visualization Scheimpflug technology (CorVis ST) device on healthy eyes and the 10 device-specific parameters were recorded. Pentacam HR-derived parameters (corneal curvature radii on the anterior and posterior surfaces; apical pachymetry; corneal volume; corneal aberration data; depth, volume and angle of the anterior chamber) and axial length (AL) from IOLMaster were correlated with the 10 specific CorVis ST parameters. RESULTS Measurements were conducted in 43 eyes of 43 volunteers (age 61.24±15.72y). The 10 specific CorVis ST data showed significant relationships with corneal curvature radii both on the anterior and posterior surface, pachymetric data, root mean square (RMS) data of lower-order aberrations, and posterior RMS of higher-order aberrations and spherical aberration of the posterior cornea. Anterior chamber depth showed a significant relationship, but there were no significant correlations between corneal volume, anterior chamber volume, mean chamber angle or AL and the 10 specific CorVis ST parameters. CONCLUSIONS CorVis ST-generated parameters are influenced by corneal curvature radii, some corneal RMS data, but corneal volume, anterior chamber volume, chamber angle and AL have no correlation with the biomechanical parameters. The parameters measured by CorVis ST seem to refer mostly to corneal properties of the eye. PMID:28251079

  15. Heat Transmission Coefficient Measurements in Buildings Utilizing a Heat Loss Measuring Device

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt


    to optimize the energy performance. This paper presents a method for measuring the heat loss by utilizing a U-value meter. The U-value meter measures the heat transfer in the unit W/Km2 and has been used in several projects to upgrade the energy performance in temperate regions. The U-value meter was also...... and mechanical ventilation in the “warm countries” contribute to an enormous energy consumption and corresponding CO2 emission. In order to establish the best basis for upgrading the energy performance, it is important to make measurements of the heat losses at different places on a building facade, in order...

  16. The Applications of Current Comparators in the Measurements on High Voltage Insulation

    Directory of Open Access Journals (Sweden)

    Fei Yi-jun


    Full Text Available This paper describes the basic structure of the current comparator used for high voltage insulation measurements. Further applications for the current comparator in high voltage insulation are investigated and developed. A measuring system for the measurement of harmonics in the loss current of water tree aged insulation is described, as well as the principles to measure partial discharges with the current comparator bridge. A new system for the measurement of the DC component in the leakage current of insulation is de1veloped and presented. The results of experiments on XLPE cable insulation are also given.

  17. Development of an inner profile measurement instrument using a ring beam device (United States)

    Yoshizawa, T.; Wakayama, T.


    Inner profile measurement is an important matter in such fields as medicine, dentistry and anthropology as well as mechanical engineering and other industrial applications. Here we describe recent development of our measurement principle for inner diameter of pipes and/or holes. The key device in this technique is a ring beam device which consists of a conical mirror and a laser diode. And the fundamental principle is based on optical sectioning without using any contact type stylus. The optically sectioned profile of an inner wall of a pipe-like object is analyzed to give the inner profile in addition to the inner diameter. This optical instrument with a simple and small configuration is now under development for practical uses. In our hitherto trial experimental works, the availability of this instrument has been evaluated in many cases and availability for practical applications is expected, especially, for measurement and inspection of mechanical components and elements besides pipes. This ring beam device consisting of a conical mirror and a LD is assembled to form a disk-like light sheet. We show measurement result of pipes and holes, and, at the same time, report a compact inner profile measuring instrument at this point. Both the ring beam device and a miniaturized CCD camera are fabricated into a glass tube. Availability of this instrument is shown by measuring the inner profiles of various pipes. In response to this trial, there appeared a strong request that not only the internal but external profiles should be measured simultaneously. Therefore we propose potentially possible method for measurement of external profile at the same time with internal profile. If one pair of concave mirrors are used in our arrangement, external profile is captured. In combination with inner profile measurement technique, simultaneous measurement of inner and outer profiles becomes attainable. A measurement result on a bevel gear shows availability of here proposed

  18. Current international intercomparison measurement on radon and its progeny

    Energy Technology Data Exchange (ETDEWEB)

    Yamasaki, Keizo [Kyoto Univ., Kumatori, Osaka (Japan). Research Reactor Inst.


    The international intercomparison measurement on radon and its progeny was held between the EML of USDOE and several Japanese organisations, using the radon test chamber installed in EML. Japanese results of radon concentration by the active method using the ionization chamber or scintillation cell and the passive method using the solid track detector were about 5% small compared to that of EML. On the results of radon progeny, there were not any large systematic differences between EML and Japanese participants in spite of wide range of deviation except for the results at the condition of low aerosol density. (author)

  19. W-state Analyzer and Multi-party Measurement-device-independent Quantum Key Distribution (United States)

    Zhu, Changhua; Xu, Feihu; Pei, Changxing


    W-state is an important resource for many quantum information processing tasks. In this paper, we for the first time propose a multi-party measurement-device-independent quantum key distribution (MDI-QKD) protocol based on W-state. With linear optics, we design a W-state analyzer in order to distinguish the four-qubit W-state. This analyzer constructs the measurement device for four-party MDI-QKD. Moreover, we derived a complete security proof of the four-party MDI-QKD, and performed a numerical simulation to study its performance. The results show that four-party MDI-QKD is feasible over 150 km standard telecom fiber with off-the-shelf single photon detectors. This work takes an important step towards multi-party quantum communication and a quantum network.

  20. Experimental measurement-device-independent quantum digital signatures over a metropolitan network (United States)

    Yin, Hua-Lei; Wang, Wei-Long; Tang, Yan-Lin; Zhao, Qi; Liu, Hui; Sun, Xiang-Xiang; Zhang, Wei-Jun; Li, Hao; Puthoor, Ittoop Vergheese; You, Li-Xing; Andersson, Erika; Wang, Zhen; Liu, Yang; Jiang, Xiao; Ma, Xiongfeng; Zhang, Qiang; Curty, Marcos; Chen, Teng-Yun; Pan, Jian-Wei


    Quantum digital signatures (QDSs) provide a means for signing electronic communications with information-theoretic security. However, all previous demonstrations of quantum digital signatures assume trusted measurement devices. This renders them vulnerable against detector side-channel attacks, just like quantum key distribution. Here we exploit a measurement-device-independent (MDI) quantum network, over a metropolitan area, to perform a field test of a three-party MDI QDS scheme that is secure against any detector side-channel attack. In so doing, we are able to successfully sign a binary message with a security level of about 10-7. Remarkably, our work demonstrates the feasibility of MDI QDSs for practical applications.