WorldWideScience

Sample records for current electrical conductivity

  1. Polymeric salt bridges for conducting electric current in microfluidic devices

    Science.gov (United States)

    Shepodd, Timothy J.; Tichenor, Mark S.; Artau, Alexander

    2009-11-17

    A "cast-in-place" monolithic microporous polymer salt bridge for conducting electrical current in microfluidic devices, and methods for manufacture thereof is disclosed. Polymeric salt bridges are formed in place in capillaries or microchannels. Formulations are prepared with monomer, suitable cross-linkers, solvent, and a thermal or radiation responsive initiator. The formulation is placed in a desired location and then suitable radiation such as UV light is used to polymerize the salt bridge within a desired structural location. Embodiments are provided wherein the polymeric salt bridges have sufficient porosity to allow ionic migration without bulk flow of solvents therethrough. The salt bridges form barriers that seal against fluid pressures in excess of 5000 pounds per square inch. The salt bridges can be formulated for carriage of suitable amperage at a desired voltage, and thus microfluidic devices using such salt bridges can be specifically constructed to meet selected analytical requirements.

  2. Comment on "Electrical Conductivity and Current-Voltage Characteristics of Individual Conducting Polymer PEDOT Nanowires"

    Institute of Scientific and Technical Information of China (English)

    P. Ohlckers; P. Pipinys

    2009-01-01

    @@ In "Electrical Conductivity and Current-Voltage Characteristics of Individual Conducting Polymer PEDOT Nanowires", Long et al.[1] reported the currentvoltage ( Ⅰ - Ⅴ) characteristics of individual poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires in the temperature range from 20 to 50K (Fig. 2(a)). The authors stated that at temperatures equal to 50 K and higher, the Ⅰ - Ⅴ curves were linear. With decreasing temperature the Ⅰ - Ⅴ curves gradually became nonlinear. The temperature behavior of Ⅰ - Ⅴ characteristics is not suitably explained.

  3. Electrical Conductivity and Current-Voltage Characteristics of Individual Conducting Polymer PEDOT Nanowires

    Institute of Scientific and Technical Information of China (English)

    LONG Yun-Ze; DUVAIL Jean-Luc; CHEN Zhao-Jia; JIN Ai-Zi; GU Chang-Zhi

    2008-01-01

    We report the current-voltage (I-V) characteristics and electrical conductivity of individual template-synthesized poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires (190 ± 6 nm in diameter and σRT : 11.2±2Ω-1cm-1)over a wide temperature range from 300 to 10K. With lowering temperature, the Ⅰ- Ⅴ characteristics become nonlinear around 50 K, and a clear Coulomb gap-like structure appears in the differential conductance (dI/dV)spectra. The temperature dependence of the resistance below 70 K follows ln R ∝ T-1/2, which can be interpreted as Efros-Shklovskii hopping conduction in the presence of a Coulomb gap. In addition, the influences of measurement methods such as the applied bias voltage magnitude, the two-probe and four-probe techniques used in the resistance measurements are also reported and discussed.

  4. Electrical Conductivity.

    Science.gov (United States)

    Hershey, David R.; Sand, Susan

    1993-01-01

    Explains how electrical conductivity (EC) can be used to measure ion concentration in solutions. Describes instrumentation for the measurement, temperature dependence and EC, and the EC of common substances. (PR)

  5. A Study on Properties of Electrical Conductive Bricks for Direct Current Electrical Arc Furnace

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    In this expeiment,the effects of temperature and graphite content on the electricl conductivity of MgO-C materials are studied,Experimental results indicated:the proper ontent of graphite is 10%-12%,The specific electrical resistance of MgO-C materials tends to decrease as the preheat treatment temerature rises.After heat treatment,the specific electrical resistance of MgO-C materials is nearly independent of temperature.

  6. Responses of atmospheric electric field and air-earth current to variations of conductivity profiles

    Science.gov (United States)

    Makino, M.; Ogawa, T.

    1984-05-01

    A global circuit model is constructed to study responses of air-earth current and electric field to a variation of atmospheric electrical conductivity profile. The model includes the orography and the global distribution of thunderstorm generators. The conductivity varies with latitude and exponentially with altitude. The thunderstorm cloud is assumed to be a current generator with a positive source at the top and a negative one at the bottom. The UT diurnal variations of the global current and the ionospheric potential are evaluated considering the local-time dependence of thunderstorm activity. The global distribution of the electric field and the air-earth current are affected by the orography and latitudinal effects. Assuming a variation of conductivity profile, responses of atmospheric electrical parameters are investigated. The nonuniform decrement of the conductivity with altitude increases both the electric field and the air-earth current. The result suggests a possibility that the increment of the electric field and the air-earth current after a solar flare may be caused by this scheme, due to Forbush decrease.

  7. Magnetic resonance electrical impedance tomography (MREIT): conductivity and current density imaging

    Science.gov (United States)

    Seo, Jin Keun; Kwon, Ohin; Woo, Eung Je

    2005-01-01

    This paper reviews the latest impedance imaging technique called Magnetic Resonance Electrical Impedance Tomography (MREIT) providing information on electrical conductivity and current density distributions inside an electrically conducting domain such as the human body. The motivation for this research is explained by discussing conductivity changes related with physiological and pathological events, electromagnetic source imaging and electromagnetic stimulations. We briefly summarize the related technique of Electrical Impedance Tomography (EIT) that deals with cross-sectional image reconstructions of conductivity distributions from boundary measurements of current-voltage data. Noting that EIT suffers from the ill-posed nature of the corresponding inverse problem, we introduce MREIT as a new conductivity imaging modality providing images with better spatial resolution and accuracy. MREIT utilizes internal information on the induced magnetic field in addition to the boundary current-voltage measurements to produce three-dimensional images of conductivity and current density distributions. Mathematical theory, algorithms, and experimental methods of current MREIT research are described. With numerous potential applications in mind, future research directions in MREIT are proposed.

  8. Electrical conductivity of the hippocampal CA1 layers and application to current-source-density analysis

    NARCIS (Netherlands)

    Holsheimer, J.

    1987-01-01

    The microstructure of the layers in the hippocampal CA1 area suggests that differences may exist between the electrical conductivities of these layers. In order to quantify these differences a sinusoidal current was applied to hippocampal slices in a bathing medium and potential differences were mea

  9. Electrical conductivity of the hippocampal CA1 layers and application to current-source-density analysis

    NARCIS (Netherlands)

    Holsheimer, J.

    1987-01-01

    The microstructure of the layers in the hippocampal CA1 area suggests that differences may exist between the electrical conductivities of these layers. In order to quantify these differences a sinusoidal current was applied to hippocampal slices in a bathing medium and potential differences were

  10. Electrical measurements in the atmosphere and the Ionosphere over an active thunderstorm. II - Direct current electric fields and conductivity

    Science.gov (United States)

    Holzworth, R. H.; Kelley, M. C.; Siefring, C. L.; Hale, L. C.; Mitchell, J. D.

    1985-01-01

    On August 9, 1981, a series of three rockets was launched over an air mass thunderstorm off the eastern seaboard of Virginia while simultaneous stratospheric and ground-based electric field measurements were made. The conductivity was substantially lower at most altitudes than the conductivity profiles used by theoretical models. Direct current electric fields over 80 mV/m were measured as far away as 96 km from the storm in the stratosphere at 23 km altitude. No dc electric fields above 75 km altitude could be identified with the thunderstorm, in agreement with theory. However, vertical current densities over 120 pA/sq m were seen well above the classical 'electrosphere' (at 50 or 60 km). Frequent dc shifts in the electric field following lightning transients were seen by both balloon and rocket payloads. These dc shifts are clearly identifiable with either cloud-to-ground (increases) or intercloud (decreases) lightning flashes.

  11. Releasing dye encapsulated in proteinaceous microspheres on conductive fabrics by electric current.

    Science.gov (United States)

    Shimanovich, Ulyana; Perelshtein, Ilana; Cavaco-Paulo, Artur; Gedanken, Aharon

    2012-06-27

    The current paper reports on the relase properties of conductive fabrics coated with proteinaceous microspheres containing a dye. The release of the dye was achieved by passing an electric current through the fabric. The conductivity of the polyester fibers resulted from nanosilver (Ag NPs) coated on the surface of these fibers. Both types of coatings (nanosilver coating and the coating of the proteinaceous microspheres) were performed using high-intensity ultrasonic waves. Two different types of dyes, hydrophilic RBBR (Remazol Brilliant Blue R) and hydrophobic ORO (Oil Red O), were encapsulated inside the microspheres (attached to the surface of polyester) and then released by applying an electric current. The Proteinaceous Microsphere (PM)-coated conductive fabrics could be used in medicine for drug release. The encapsulated dye can be replaced with a drug that could be released from the surface of fabrics by applying a low voltage.

  12. Conduction mechanisms in some graphite - polymer composites: the effect of a direct-current electric field

    Science.gov (United States)

    Celzard, A.; McRae, E.; Furdin, G.; Marêché, J. F.

    1997-03-01

    This paper deals with the possible conduction mechanisms in highly anisotropic composites comprising 0 - 10 vol% graphite flakes within a polymer host. Conductivity measurements as a function of DC electric field have been made. In most cases, a non-linear behaviour of the current - voltage relationships is observed. A number of theoretical models are considered and we show that none of them is, by itself, able to explain our results. We further develop several arguments which lead us to consider the existence of a combined tunnelling effect and ionic conduction mechanism.

  13. Ionospheric conductances and currents of a morning sector auroral arc from Swarm-A electric and magnetic field measurements

    Science.gov (United States)

    Juusola, L.; Archer, W. E.; Kauristie, K.; Burchill, J. K.; Vanhamäki, H.; Aikio, A. T.

    2016-11-01

    We show the first ionospheric Hall and Pedersen conductances derived from Swarm magnetic and electric field measurements during a crossing of a morning sector auroral arc. Only Swarm-A was used, with assumptions of negligible azimuthal gradients and vanishing eastward electric field. We find upward field-aligned current, enhanced Hall and Pedersen conductances, and relatively weak electric field coincident with the arc. Poleward of the arc, the field-aligned current was downward, conductances lower, and the electric field enhanced. The arc was embedded in a westward electrojet, immediately equatorward of the peak current density. The equatorward portion of the electrojet could thus be considered conductance dominant and the poleward portion electric field dominant. Although the electric field measured by Swarm was intense, resulting in conductances lower than those typically reported, comparable electric fields have been observed earlier. These results demonstrate how Swarm data can significantly contribute to our understanding of the ionospheric electrodynamics.

  14. Thermoelectric Property Dependence and Geometry Optimization of Peltier Current Leads Using Highly Electrically Conductive Thermoelectric Materials

    Science.gov (United States)

    Fujii, Tomohiro; Fukuda, Shinji; Emoto, Masahiko; Osada, Koudai; Kawahara, Toshio; Hamabe, Makoto; Watanabe, Hirofumi; Ivanov, Yury; Sun, Jian; Yamaguchi, Satarou

    2011-05-01

    Thermoelectric materials are promising candidates for use in energy-saving devices in many fields. They are also useful in superconducting applications such as those using Peltier current leads (PCLs) to reduce system heat loss. In the case of PCLs, consideration must be given to Joule heating. Furthermore, the performance of PCLs is intricately dependent on their thermoelectric properties. In addition to the figure of merit Z, consideration of the electrical conductivity is also important for the design of high-performance PCLs. In this paper, we discuss the resistivity dependence of the performance of PCLs using model parameters obtained from real devices.

  15. Conductivity and current density image reconstruction using harmonic Bz algorithm in magnetic resonance electrical impedance tomography.

    Science.gov (United States)

    Oh, Suk Hoon; Lee, Byung Il; Woo, Eung Je; Lee, Soo Yeol; Cho, Min Hyoung; Kwon, Ohin; Seo, Jin Keun

    2003-10-07

    Magnetic resonance electrical impedance tomography (MREIT) is to provide cross-sectional images of the conductivity distribution sigma of a subject. While injecting current into the subject, we measure one component Bz of the induced magnetic flux density B = (Bx, By, Bz) using an MRI scanner. Based on the relation between (inverted delta)2 Bz and inverted delta sigma, the harmonic Bz algorithm reconstructs an image of sigma using the measured Bz data from multiple imaging slices. After we obtain sigma, we can reconstruct images of current density distributions for any given current injection method. Following the description of the harmonic Bz algorithm, this paper presents reconstructed conductivity and current density images from computer simulations and phantom experiments using four recessed electrodes injecting six different currents of 26 mA. For experimental results, we used a three-dimensional saline phantom with two polyacrylamide objects inside. We used our 0.3 T (tesla) experimental MRI scanner to measure the induced Bz. Using the harmonic Bz algorithm, we could reconstruct conductivity and current density images with 82 x 82 pixels. The pixel size was 0.6 x 0.6 mm2. The relative L2 errors of the reconstructed images were between 13.8 and 21.5% when the signal-to-noise ratio (SNR) of the corresponding MR magnitude images was about 30. The results suggest that in vitro and in vivo experimental studies with animal subjects are feasible. Further studies are requested to reduce the amount of injection current down to less than 1 mA for human subjects.

  16. Summary of Almost 20 Years of Storm Overflight Electric Field, Conductivity, Flash Rate, and Current Statistics

    Science.gov (United States)

    Blakeslee, Richard J.; Mach, Douglas M.; Bateman, Monte J.; Bailey, Jeffrey C.

    2011-01-01

    We present total conduction (Wilson) currents for more than 1000 high-altitude aircraft overflights of electrified clouds acquired over nearly two decades. The overflights include a wide geographical sample of storms over land and ocean, with and without lightning, and with positive (i.e., upward-directed) and negative current. Peak electric field, with lightning transients removed, ranged from -1.0 kV/m to 16. kV/m, with mean (median) of 0.9 kV/m (0.29 kV/m). Total conductivity at flight altitude ranged from 0.6 pS/m to 3.6 pS/m, with mean and median of 2.2 pS/m. Peak current densities ranged from -2.0 nA m(exp -2) to 33.0 nA m(exp -2) with mean (median) of 1.9 nA m(exp -2) (0.6 nA m(exp -2)). Total upward current flow from storms in our dataset ranged from -1.3 to 9.4 A. The mean current for storms with lightning is 1.7 A over ocean and 1.0 A over land. The mean current for electrified shower clouds (i.e. electrified storms without lightning) is 0.41 A for ocean and 0.13 A for land. About 78% (43%) of the land (ocean) storms have detectable lightning. Land storms have 2.8 times the mean flash rate as ocean storms (2.2 versus 0.8 flashes min-1, respectively). Approximately 7% of the overflights had negative current. The mean and median currents for positive (negative) polarity storms are 1.0 and 0.35 A (-0.30 and -0.26 A). We found no regional or latitudinal-based patterns in our storm currents, nor support for simple scaling laws between cloud top height and lightning flash rate.

  17. Summary of Almost 20 Years of Storm Overflight Electric Field, Conductivity, Flash Rates, and Electric Current Statistics

    Science.gov (United States)

    Blakeslee, Richard J.; Mach, Douglas M.; Bateman, Monte J.; Bailey, Jeffrey C.

    2011-01-01

    We determined total conduction currents and flash rates for around 900 high-altitude aircraft overflights of electrified clouds over 17 years. The overflights include a wide geographical sample of storms over land and ocean, with and without lightning, and with positive (i.e., upward-directed) and negative current. Peak electric field, with lightning transients removed, ranged from -1.0 kV m(sup -1) to 16. kV m(sup -1), with mean (median) of 0.9 kV m(sup -1) (0.29 kV m(sup -1)). Total conductivity at flight altitude ranged from 0.6 pS m(sup -1) to 3.6 pS m(sup -1), with mean and median of 2.2 pS m(sup -1). Peak current densities ranged from -2.0 nA m(sup -2) to 33.0 nA m(sup -2) with mean (median) of 1.9 nA m(sup -2) (0.6 nA m(sup -2)). Total upward current flow from storms in our dataset ranged from -1.3 to 9.4 A. The mean current for storms with lightning is 1.6 A over ocean and 1.0 A over land. The mean current for electrified shower clouds (i.e. electrified storms without lightning) is 0.39 A for ocean and 0.13 A for land. About 78% (43%) of the land (ocean) storms have detectable lightning. Land storms have 2.8 times the mean flash rate as ocean storms (2.2 versus 0.8 flashes min(sup -1), respectively). Approximately 7% of the overflights had negative current. The mean and median currents for positive (negative) polarity storms are 1.0 and 0.35 A (-0.30 and -0.26 A). We found no regional or latitudinal-based patterns in our storm currents, nor support for simple scaling laws between cloud top height and lightning flash rate.

  18. Electrically conductive cellulose composite

    Science.gov (United States)

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2010-05-04

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  19. Interpretation of electrokinetic measurements with porous films: role of electric conductance and streaming current within porous structure.

    Science.gov (United States)

    Yaroshchuk, Andriy; Luxbacher, Thomas

    2010-07-06

    It is shown that in tangential electrokinetic measurements with porous films the porous structure makes contribution not only to the cell electric conductance (as demonstrated previously) but also to the observed streaming current. Both of these contributions give rise to dependences of streaming-potential and streaming-current coefficients on the channel height. However, due to the combined contribution of two phenomena, the dependence of streaming-potential coefficient on the channel height may be rather complicated and not allow for simple extrapolation. At the same time, the dependences of streaming-current coefficient and cell electric conductance on the channel height turn out linear and can be easily extrapolated to zero channel heights. This enables one to determine separately the contributions of external surface of porous film and of its porous structure to the streaming current and of the channel and porous structure to the cell electric conductance. This procedure is illustrated by the measurements of tangential electrokinetic phenomena and electric conductance with Millipore mixed-cellulose membrane filters of various average pore sizes (from 0.025 to 5 mum) in the so-called adjustable-gap cell of SurPASS electrokinetic instrument (Anton Paar GmbH). The design of this cell allows for easy and quasi-continuous variation of channel height as well as accurate determination of cell electric conductance, streaming-current coefficient, and channel height (from the cell hydraulic permeability). The quality of linear fits of experimental data has been found to be very good, and thus, the extrapolation procedures were quite reliable and accurate. Zeta-potentials could be determined of both external film and internal pore surfaces. It is demonstrated that the porous structures make considerable contributions to both streaming-current coefficient and cell electric conductance especially in the case of filters with larger pores. It is also found that, rather

  20. Surface profile gradient in amorphous Ta2O5 semi conductive layers regulates nanoscale electric current stability

    Science.gov (United States)

    Cefalas, A. C.; Kollia, Z.; Spyropoulos-Antonakakis, N.; Gavriil, V.; Christofilos, D.; Kourouklis, G.; Semashko, V. V.; Pavlov, V.; Sarantopoulou, E.

    2017-02-01

    A link between the morphological characteristics and the electric properties of amorphous layers is established by means of atomic, conductive, electrostatic force and thermal scanning microscopy. Using amorphous Ta2O5 (a-Ta2O5) semiconductive layer, it is found that surface profile gradients (morphological gradient), are highly correlated to both the electron energy gradient of trapped electrons in interactive Coulombic sites and the thermal gradient along conductive paths and thus thermal and electric properties are correlated with surface morphology at the nanoscale. Furthermore, morphological and electron energy gradients along opposite conductive paths of electrons intrinsically impose a current stability anisotropy. For either long conductive paths (L > 1 μm) or along symmetric nanodomains, current stability for both positive and negative currents i is demonstrated. On the contrary, for short conductive paths along non-symmetric nanodomains, the set of independent variables (L, i) is spanned by two current stability/intability loci. One locus specifies a stable state for negative currents, while the other locus also describes a stable state for positive currents.

  1. DC bias effect on alternating current electrical conductivity of poly(ethylene terephthalate)/alumina nanocomposites

    Science.gov (United States)

    Nikam, Pravin N.; Deshpande, Vineeta D.

    2016-05-01

    Polymer nanocomposites based on metal oxide (ceramic) nanoparticles are a new class of materials with unique properties and designed for various applications such as electronic device packaging, insulation, fabrication and automotive industries. Poly(ethylene terephthalate) (PET)/alumina (Al2O3) nanocomposites with filler content between 1 wt% and 5 wt% were prepared by melt compounding method using co-rotating twin screw extruder and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and precision LCR meter techniques. The results revealed that proper uniform dispersion at lower content up to 2 wt% of nano-alumina observed by using TEM. Aggregation of nanoparticles was observed at higher content of alumina examined by using SEM and TEM. The frequency dependences of the alternating current (AC) conductivity (σAC) of PET/alumina nanocomposites on the filler content and DC bias were investigated in the frequency range of 20Hz - 1MHz. The results showed that the AC and direct current (DC) conductivity increases with increasing DC bias and nano-alumina content upto 3 wt%. It follows the Jonscher's universal power law of solids. It revealed that σAC of PET/alumina nanocomposites can be well characterized by the DC conductivity (σDC), critical frequency (ωc), critical exponent of the power law (s). Roll of DC bias potential led to an increase of DC conductivity (σDC) due to the creation of additional conducting paths with the polymer nanocomposites and percolation behavior achieved through co-continuous morphology.

  2. Ground-based instrumentation for measurements of atmospheric conduction current and electric field at the South Pole

    Science.gov (United States)

    Byrne, G. J.; Benbrook, J. R.; Bering, E. A.; Few, A. A.; Morris, G. A.; Trabucco, W. J.; Paschal, E. W.

    1993-01-01

    Attention is given to instruments constructed to measure the atmospheric conduction current and the atmospheric electric field - two fundamental parameters of the global-electric circuit. The instruments were deployed at the Amundsen-Scott South Pole Station in January 1991 and are designed to operate continuously for up to one year without operator intervention. The atmospheric current flows into one hemisphere, through the electronics where it is measured, and out the other hemisphere. The electric field is measured by a field mill of the rotating dipole type. Sample data from the first days of operation at the South Pole indicate variations in the global circuit over time scales from minutes to hours to days.

  3. A methodology to investigate the intrinsic effect of the pulsed electric current during the spark plasma sintering of electrically conductive powders.

    Science.gov (United States)

    Locci, Antonio Mario; Cincotti, Alberto; Todde, Sara; Orrù, Roberto; Cao, Giacomo

    2010-08-01

    A novel methodology is proposed for investigating the effect of the pulsed electric current during the spark plasma sintering (SPS) of electrically conductive powders without potential misinterpretation of experimental results. First, ensemble configurations (geometry, size and material of the powder sample, die, plunger and spacers) are identified where the electric current is forced to flow only through either the sample or the die, so that the sample is heated either through the Joule effect or by thermal conduction, respectively. These ensemble configurations are selected using a recently proposed mathematical model of an SPS apparatus, which, once suitably modified, makes it possible to carry out detailed electrical and thermal analysis. Next, SPS experiments are conducted using the ensemble configurations theoretically identified. Using aluminum powders as a case study, we find that the temporal profiles of sample shrinkage, which indicate densification behavior, as well as the final density of the sample are clearly different when the electric current flows only through the sample or through the die containing it, whereas the temperature cycle and mechanical load are the same in both cases.

  4. A methodology to investigate the intrinsic effect of the pulsed electric current during the spark plasma sintering of electrically conductive powders

    Directory of Open Access Journals (Sweden)

    Antonio Mario Locci, Alberto Cincotti, Sara Todde, Roberto Orrù and Giacomo Cao

    2010-01-01

    Full Text Available A novel methodology is proposed for investigating the effect of the pulsed electric current during the spark plasma sintering (SPS of electrically conductive powders without potential misinterpretation of experimental results. First, ensemble configurations (geometry, size and material of the powder sample, die, plunger and spacers are identified where the electric current is forced to flow only through either the sample or the die, so that the sample is heated either through the Joule effect or by thermal conduction, respectively. These ensemble configurations are selected using a recently proposed mathematical model of an SPS apparatus, which, once suitably modified, makes it possible to carry out detailed electrical and thermal analysis. Next, SPS experiments are conducted using the ensemble configurations theoretically identified. Using aluminum powders as a case study, we find that the temporal profiles of sample shrinkage, which indicate densification behavior, as well as the final density of the sample are clearly different when the electric current flows only through the sample or through the die containing it, whereas the temperature cycle and mechanical load are the same in both cases.

  5. Reply to "Comment on 'Electrical Conductivity and Current-Voltage Characteristics of Individual Conducting Polymer PEDOT Nanowires'"

    Institute of Scientific and Technical Information of China (English)

    LONG Yun-Ze

    2009-01-01

    @@ Recently we reported electrical properties of an individual PEDOT nanowire.[1] Ohlckers and Pipinys[2]suggested that the temperature-behavior of Ⅰ- Ⅴcurves and resistance can be described in the framework of a phonon-assisted tunneling (PhAT) model.

  6. Scalability of the Heat and Current Treatment on SWCNTs to Improve their Crystallinity and Thermal and Electrical Conductivities

    Science.gov (United States)

    Matsumoto, Naoyuki; Oshima, Azusa; Sakurai, Shunsuke; Yumura, Motoo; Hata, Kenji; Futaba, Don N.

    2015-05-01

    We have investigated the scalability of our post-synthesis graphitization process for single-walled carbon nanotubes (SWCNTs), which applies heat and current to SWCNTs to improve the thermal and electrical conductivities. This investigation was performed by examining the relationship between the processing conditions and the amount of treated SWCNTs. Characterization of all cases of treated SWCNTs showed the same level of improvement of ~3 times to both the thermal and electrical conductivities and that the SWCNTs remained SWCNTs, i.e., no change in diameter or wall number. These results provided evidence that the ability to improve the crystallinity of the SWCNTs was independent of the treatment amount. Further, our results showed that an increase in SWCNT amount required increased applied current density or increased in applied temperature to achieve optimum property improvement. Finally, we found a trade-off between the current density and temperature indicating that either a high current or high temperature was required to achieve the optimum process conditions. These results demonstrated that our heat and current SWCNT treatment was fundamentally scalable and applied towards larger scale (i.e., gram-level or more) amounts of SWCNT.

  7. Electrically Conducting Polymers.

    Science.gov (United States)

    1983-04-07

    polypyrrole, the oxidized polythiophene is also unstable in air. A rather different class of conducting polymers lies outside the scope of this review but...AD-A129 488 ELECTRICALLY CONDUCTING POLYNERS(U) IBM RESEARCH LAB / SAN JOSE CA W D GILL ET RL. 97 APR 83 TR-B UNCLASSIFIED F/G 7/3 N I Ihhhhhhhhhhhhl...00 Contract N00014-80-C-0779 Technical Report No. 8 *Electrically Conducting Polymers by W. D. Gill, T. C. Clarke, and G. B. Street Prepared for

  8. Electrical Conductivity in Textiles

    Science.gov (United States)

    2006-01-01

    Copper is the most widely used electrical conductor. Like most metals, though, it has several drawbacks: it is heavy, expensive, and can break. Fibers that conduct electricity could be the solutions to these problems, and they are of great interest to NASA. Conductive fibers provide lightweight alternatives to heavy copper wiring in a variety of settings, including aerospace, where weight is always a chief concern. This is an area where NASA is always seeking improved materials. The fibers are also more cost-effective than metals. Expenditure is another area where NASA is always looking to make improvements. In the case of electronics that are confined to small spaces and subject to severe stress, copper is prone to breaking and losing connection over time. Flexible conductive fibers eliminate that problem. They are more supple and stronger than brittle copper and, thus, find good use in these and similar situations. While clearly a much-needed material, electrically conductive fibers are not readily available. The cost of new technology development, with all the pitfalls of troubleshooting production and the years of testing, and without the guarantee of an immediate market, is often too much of a financial hazard for companies to risk. NASA, however, saw the need for electrical fibers in its many projects and sought out a high-tech textile company that was already experimenting in this field, Syscom Technology, Inc., of Columbus, Ohio. Syscom was founded in 1993 to provide computer software engineering services and basic materials research in the areas of high-performance polymer fibers and films. In 1999, Syscom decided to focus its business and technical efforts on development of high-strength, high-performance, and electrically conductive polymer fibers. The company developed AmberStrand, an electrically conductive, low-weight, strong-yet-flexible hybrid metal-polymer YARN.

  9. Electrical conductivity in Langmuir-Blodgett films of n-alkyl cyanobiphenyls using current sensing atomic force microscope

    Energy Technology Data Exchange (ETDEWEB)

    Gayathri, H. N.; Suresh, K. A., E-mail: suresh@cnsms.res.in [Centre for Nano and Soft Matter Sciences, P. B. No. 1329, Jalahalli, Bangalore 560013 (India)

    2015-06-28

    We report our studies on the nanoscale electrical conductivity in monolayers of n-alkyl cyanobiphenyl materials deposited on solid surface. Initially, the 8CB, 9CB, and 10CB monolayer films were prepared by the Langmuir technique at air-water interface and characterized by surface manometry and Brewster angle microscopy. The monolayer films were transferred on to solid substrates by the Langmuir-Blodgett (L-B) technique. The 8CB, 9CB, and 10CB monolayer L-B films were deposited on freshly cleaved mica and studied by atomic force microscope (AFM), thereby measuring the film thickness as ∼1.5 nm. The electrical conductivity measurements were carried out on 9CB and 10CB monolayer L-B films deposited onto highly ordered pyrolytic graphite using current sensing AFM. The nanoscale current-voltage (I-V) measurements show a non-linear variation. The nature of the curve indicates electron tunneling to be the mechanism for electrical conduction. Furthermore, analysis of the I-V curve reveals a transition in the electron conduction mechanism from direct tunneling to injection tunneling. From the transition voltage, we have estimated the values of barrier height for 9CB and 10CB to be 0.71 eV and 0.37 eV, respectively. For both 9CB and 10CB, the effective mass of electron was calculated to be 0.021 m{sub e} and 0.065 m{sub e}, respectively. These parameters are important in the design of molecular electronic devices.

  10. Electrically Conductive Porous Membrane

    Science.gov (United States)

    Burke, Kenneth Alan (Inventor)

    2014-01-01

    The present invention relates to an electrically conductive membrane that can be configured to be used in fuel cell systems to act as a hydrophilic water separator internal to the fuel cell, or as a water separator used with water vapor fed electrolysis cells, or as a water separator used with water vapor fed electrolysis cells, or as a capillary structure in a thin head pipe evaporator, or as a hydrophobic gas diffusion layer covering the fuel cell electrode surface in a fuel cell.

  11. Multiple pulse-heating experiments with different current to determine total emissivity, heat capacity, and electrical resistivity of electrically conductive materials at high temperatures.

    Science.gov (United States)

    Watanabe, Hiromichi; Yamashita, Yuichiro

    2012-01-01

    A modified pulse-heating method is proposed to improve the accuracy of measurement of the hemispherical total emissivity, specific heat capacity, and electrical resistivity of electrically conductive materials at high temperatures. The proposed method is based on the analysis of a series of rapid resistive self-heating experiments on a sample heated at different temperature rates. The method is used to measure the three properties of the IG-110 grade of isotropic graphite at temperatures from 850 to 1800 K. The problem of the extrinsic heating-rate effect, which reduces the accuracy of the measurements, is successfully mitigated by compensating for the generally neglected experimental error associated with the electrical measurands (current and voltage). The results obtained by the proposed method can be validated by the linearity of measured quantities used in the property determinations. The results are in reasonably good agreement with previously published data, which demonstrate the suitability of the proposed method, in particular, to the resistivity and total emissivity measurements. An interesting result is the existence of a minimum in the emissivity of the isotropic graphite at around 1120 K, consistent with the electrical resistivity results.

  12. Electric Current Solves Mazes

    Science.gov (United States)

    Ayrinhac, Simon

    2014-01-01

    We present in this work a demonstration of the maze-solving problem with electricity. Electric current flowing in a maze as a printed circuit produces Joule heating and the right way is instantaneously revealed with infrared thermal imaging. The basic properties of electric current can be discussed in this context, with this challenging question:…

  13. Electric Conductivity of Phosphorus Nanowires

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jing-Xiang; LI Hui; ZHANG Xue-Qing; LIEW Kim-Meow

    2009-01-01

    We present the structures and electrical transport properties of nanowires made from different strands of phosphorus chains encapsulated in carbon nanotubes. Optimized by density function theory, our results indicate that the conductance spectra reveal an oscillation dependence on the size of wires. It can be seen from the density of states and current-voltage curves that the structure of nanowires affects their properties greatly. Among them,the DNA-like double-helical phosphorus nanowire exhibits the distinct characteristic of an approximately linear I - V relationship and has a higher conductance than others. The transport properties of phosphorus nanowires are highly correlated with their microstructures.

  14. Direct current electric potential in an anisotropic half-space with vertical contact containing a conductive 3D body

    Directory of Open Access Journals (Sweden)

    Li Ping

    2004-01-01

    Full Text Available Detailed studies of anomalous conductors in otherwise homogeneous media have been modelled. Vertical contacts form common geometries in galvanic studies when describing geological formations with different electrical conductivities on either side. However, previous studies of vertical discontinuities have been mainly concerned with isotropic environments. In this paper, we deal with the effect on the electric potentials, such as mise-à-la-masse anomalies, due to a conductor near a vertical contact between two anisotropic regions. We also demonstrate the interactive effects when the conductive body is placed across the vertical contact. This problem is normally very difficult to solve by the traditional numerical methods. The integral equations for the electric potential in anisotropic half-spaces are established. Green's function is obtained using the reflection and transmission image method in which five images are needed to fit the boundary conditions on the vertical interface and the air-earth surface. The effects of the anisotropy of the environments and the conductive body on the electric potential are illustrated with the aid of several numerical examples.

  15. Electric current locator

    Science.gov (United States)

    King, Paul E [Corvallis, OR; Woodside, Charles Rigel [Corvallis, OR

    2012-02-07

    The disclosure herein provides an apparatus for location of a quantity of current vectors in an electrical device, where the current vector has a known direction and a known relative magnitude to an input current supplied to the electrical device. Mathematical constants used in Biot-Savart superposition equations are determined for the electrical device, the orientation of the apparatus, and relative magnitude of the current vector and the input current, and the apparatus utilizes magnetic field sensors oriented to a sensing plane to provide current vector location based on the solution of the Biot-Savart superposition equations. Description of required orientations between the apparatus and the electrical device are disclosed and various methods of determining the mathematical constants are presented.

  16. Electrical Conductivity of Ferritin Proteins by Conductive AFM

    Science.gov (United States)

    Xu, Degao; Watt, Gerald D.; Harb, John N.; Davis, Robert C.

    2005-01-01

    Electrical conductivity measurements were performed on single apoferritin and holoferritin molecules by conductive atomic force microscopy. Conductivity of self-assembled monolayer films of ferritin molecules on gold surfaces was also measured. Holoferritin was 5-25 times more conductive than apoferritin, indicating that for holoferritin most electron-transfer goes through the ferrihydrite core. With 1 V applied, the average electrical currents through single holoferritin and apoferritin molecules were 2.6 PA and 0.19 PA, respectively.

  17. Electrically conductive anodized aluminum coatings

    Science.gov (United States)

    Alwitt, Robert S. (Inventor); Liu, Yanming (Inventor)

    2001-01-01

    A process for producing anodized aluminum with enhanced electrical conductivity, comprising anodic oxidation of aluminum alloy substrate, electrolytic deposition of a small amount of metal into the pores of the anodized aluminum, and electrolytic anodic deposition of an electrically conductive oxide, including manganese dioxide, into the pores containing the metal deposit; and the product produced by the process.

  18. On the direct current electric conductivity and conduction mechanism of some stable disubstituted 4-(4-pyridyl)pyridinium ylides in thin films

    Energy Technology Data Exchange (ETDEWEB)

    Danac, R. [Faculty of Chemistry, Alexandru Ioan Cuza University of Iasi, Bulevardul Carol I, Nr. 11, 700506 Iasi (Romania); Leontie, L., E-mail: lleontie@uaic.ro [Faculty of Physics, Alexandru Ioan Cuza University of Iasi, Bulevardul Carol I, Nr. 11, 700506 Iasi (Romania); Girtan, M. [Laboratoire LPhiA, Angers University, 2, Bd. Lavoisier, 49045 Angers (France); Prelipceanu, M.; Graur, A. [Faculty of Electrical Engineering and Computer Science, Stefan cel Mare University of Suceava, Str.Universitatii, Nr.13, RO-720229 Suceava (Romania); Carlescu, A.; Rusu, G.I. [Faculty of Physics, Alexandru Ioan Cuza University of Iasi, Bulevardul Carol I, Nr. 11, 700506 Iasi (Romania)

    2014-04-01

    Temperature-dependent d.c. electric conductivity of some recently synthesized organic compounds, stable disubstituted 4-(4-pyridyl)pyridinium ylides, is studied. Thin-film samples (d = 0.100.80 μm) spin-coated from dimethylformamide solutions onto glass substrates have been used. Organic films with reproducible electron transport properties can be obtained if, after deposition, they are submitted to a heat treatment within temperature range of 297 − 527 K. The studied polycrystalline compounds exhibit typical n-type semiconductor behavior. The activation energy of the electric conduction ranges between 0.59 and 0.94 eV. Some correlations between semiconducting parameters and molecular structure of the organic compounds have been discussed. In the higher temperature range (T > 400 K), the electron transport in examined compounds can be interpreted in terms of the band gap representation model, while in the lower temperature range, the Mott's variable-range hopping conduction model was found to be appropriate. Some of the investigated compounds hold promise for thermistor applications. - Highlights: • 4-(4-Pyridyl)pyridinium ylides in thin films behave as n-type semiconductors. • The electron transfer is favored by extended conjugation and packing capacity. • The band gap representation is suitable in the higher temperature range. • The Mott's variable-range hopping model may be used in the lower temperature range.

  19. Improving the electrical performance of a conductive atomic force microscope with a logarithmic current-to-voltage converter

    Science.gov (United States)

    Aguilera, L.; Lanza, M.; Porti, M.; Grifoll, J.; Nafría, M.; Aymerich, X.

    2008-07-01

    A new configuration of conductive atomic force microscope (CAFM) is presented, which is based in a standard CAFM where the typical I-V converter has been replaced by a logI-V amplifier. This substitution extends the current dynamic range from 1-100pAto1pA -1mA. With the broadening of the current dynamic range, the CAFM can access new applications, such as the reliability evaluation of metal-oxide-semiconductor gate dielectrics. As an example, the setup has been tested by analyzing breakdown spots induced in SiO2 layers.

  20. Electrically Conductive Anodized Aluminum Surfaces

    Science.gov (United States)

    Nguyen, Trung Hung

    2006-01-01

    Anodized aluminum components can be treated to make them sufficiently electrically conductive to suppress discharges of static electricity. The treatment was conceived as a means of preventing static electric discharges on exterior satin-anodized aluminum (SAA) surfaces of spacecraft without adversely affecting the thermal-control/optical properties of the SAA and without need to apply electrically conductive paints, which eventually peel off in the harsh environment of outer space. The treatment can also be used to impart electrical conductivity to anodized housings of computers, medical electronic instruments, telephoneexchange equipment, and other terrestrial electronic equipment vulnerable to electrostatic discharge. The electrical resistivity of a typical anodized aluminum surface layer lies between 10(exp 11) and 10(exp 13) Omega-cm. To suppress electrostatic discharge, it is necessary to reduce the electrical resistivity significantly - preferably to anodized surface becomes covered and the pores in the surface filled with a transparent, electrically conductive metal oxide nanocomposite. Filling the pores with the nanocomposite reduces the transverse electrical resistivity and, in the original intended outer-space application, the exterior covering portion of the nanocomposite would afford the requisite electrical contact with the outer-space plasma. The electrical resistivity of the nanocomposite can be tailored to a value between 10(exp 7) and 10(exp 12) Omega-cm. Unlike electrically conductive paint, the nanocomposite becomes an integral part of the anodized aluminum substrate, without need for adhesive bonding material and without risk of subsequent peeling. The electrodeposition process is compatible with commercial anodizing production lines. At present, the electronics industry uses expensive, exotic, electrostaticdischarge- suppressing finishes: examples include silver impregnated anodized, black electroless nickel, black chrome, and black copper. In

  1. Electrically conducting polymers for aerospace applications

    Science.gov (United States)

    Meador, Mary Ann B.; Gaier, James R.; Good, Brian S.; Sharp, G. R.; Meador, Michael A.

    1991-01-01

    Current research on electrically conducting polymers from 1974 to the present is reviewed focusing on the development of materials for aeronautic and space applications. Problems discussed include extended pi-systems, pyrolytic polymers, charge-transfer systems, conductive matrix resins for composite materials, and prospects for the use of conducting polymers in space photovoltaics.

  2. Electrical parameters and current conduction mechanism in Cr/Au/n-InP Schottky structure at different annealing temperatures

    Science.gov (United States)

    Reddy, M. Bhaskar; Padma, R.; Reddy, V. Rajagopal

    2015-06-01

    Cr/Au/n-InP Schottky structures are fabricated and their electrical characteristics are investigated at different annealing temperatures. As-deposited Cr/Au/n-InP Schottky diode exhibits a barrier height of 0.51 eV (I-V) and 0.64 eV (C-V), which increases to 0.63 eV (I-V) and 0.75 eV (C-V) after annealing at 100 °C. A maximum barrier height of 0.71 eV (I-V) and 0.81 eV (C-V) is achieved for the Cr/Au Schottky contacts after annealing at 200 °C. Further, it is observed that the Schottky barrier height slightly decreases upon annealing at temperature of 300 °C and the obtained values are 0.58 eV (I-V), 0.69 eV (C-V). The reverse-bias leakage current mechanism of Cr/Au/n-InP Schottky barrier diode is investigated. Investigations reveal that the Schottky emission is the dominant mechanism and the Poole-Frenkel emission occurs only in the high voltage region.

  3. Magnetic Imaging of Applied and Propagating Action Currents in Cardiac Tissue Slices: Determination of Anisotropic Electrical Conductivities in a Two-Dimensional Bidomain.

    Science.gov (United States)

    Staton, Daniel Joseph

    We describe the first, high-resolution magnetic images of applied currents and propagating action currents in slices of canine cardiac tissue. This tissue was maintained in vitro at 37^circC. Our main conclusions are summarized as follows: the action currents produce magnetic fields which are measurable; during the initial stages of the propagating action potential, small, expanding, quatrefoil loops of current develop; the magnetic fields produced by repolarization currents are larger than previously anticipated. Most of the current associated with the propagating action potential is confined within the wavefront and should be magnetically silent; however, differences in the intracellular and extracellular electrical conductivities, in both the longitudinal and transverse fiber directions, are great enough that expanding quatrefoil current densities are associated with the wavefront and produce measurable magnetic fields. Since action currents are affected by the electrical conductivities, it is of interest to determine their values, which depend not only upon the tissue characteristics, but also on the mathematical model used to interpret the measured data. In our analysis of current injection, we use the anisotropic bidomain model which incorporates a passive, linear membrane. We introduce theoretical techniques to calculate the anisotropic conductivities of a two-dimensional bidomain. To apply these techniques to magnetic fields resulting from current injection into cardiac tissue slices, we need to improve the higher spatial frequency content of our present measurements. This may be done by measuring the magnetic field closer to the cardiac slice (presently 2.5 mm), decreasing the sampling interval of the measurement, and increasing the sampling area of the field. Magnetic fields are produced by propagating action currents, which are in turn the result of the propagating action potential. From the magnetic field, we directly image isochronal transmembrane

  4. Electrical Conductivity of Cryolite Melts

    Science.gov (United States)

    Fellner, P.; Grjotheim, K.; Kvande, H.

    1985-11-01

    This paper proposes an equation for the electrical conductivity of multicomponent cryolite-based mixtures. The equation is based on a physical model which assumes that the conductivity is proportional to the number density of the effective electric charges in the melt. The various authors in the available literature show a great discrepancy in conductivity data of cryolite-based melts. The equation based on the physical model enables determination of which set of data is preferable. Special consideration in this respect is given to the influence of magnesium flouride and lithium flouride additions to the melt.

  5. Electrical conductivity of chondritic meteorites

    Science.gov (United States)

    Duba, AL; Didwall, E. M.; Burke, G. J.; Sonett, C. P.

    1987-01-01

    The electrical conductivity of samples of the Murchison and Allende carbonaceous chondrites is 4 to 6 orders of magnitude greater than rock forming minerals such as olivine for temperatures up to 700 C. The remarkably high electrical conductivity of these meteorites is attributed to carbon at the grain boundaries. Much of this carbon is produced by pyrolyzation of hydrocarbons at temperatures in excess of 150 C. As the temperature increases, light hydrocarbons are driven off and a carbon-rich residue or char migrates to the grain boundaries enhancing electrical conductivity. Assuming that carbon was present at the grain boundaries in the material which comprised the meteorite parent bodies, the electrical heating of such bodies was calculated as a function of body size and solar distance during a hypothetical T-Tauri phase of the sun. Input conductivity data for the meteorite parent body were the present carbonaceous chondrite values for temperatures up to 840 C and the electrical conductivity values for olivine above 840 C.

  6. Effects of tissue conductivity and electrode area on internal electric fields in a numerical human model for ELF contact current exposures

    Science.gov (United States)

    Tarao, H.; Kuisti, H.; Korpinen, L.; Hayashi, N.; Isaka, K.

    2012-05-01

    Contact currents flow through the human body when a conducting object with different potential is touched. There are limited reports on numerical dosimetry for contact current exposure compared with electromagnetic field exposures. In this study, using an anatomical human adult male model, we performed numerical calculation of internal electric fields resulting from 60 Hz contact current flowing from the left hand to the left foot as a basis case. Next, we performed a variety of similar calculations with varying tissue conductivity and contact area, and compared the results with the basis case. We found that very low conductivity of skin and a small electrode size enhanced the internal fields in the muscle, subcutaneous fat and skin close to the contact region. The 99th percentile value of the fields in a particular tissue type did not reliably account for these fields near the electrode. In the arm and leg, the internal fields for the muscle anisotropy were identical to those in the isotropy case using a conductivity value longitudinal to the muscle fibre. Furthermore, the internal fields in the tissues abreast of the joints such as the wrist and the elbow, including low conductivity tissues, as well as the electrode contact region, exceeded the ICNIRP basic restriction for the general public with contact current as the reference level value.

  7. Electrical Conductivity in Transition Metals

    Science.gov (United States)

    Talbot, Christopher; Vickneson, Kishanda

    2013-01-01

    The aim of this "Science Note" is to describe how to test the electron-sea model to determine whether it accurately predicts relative electrical conductivity for first-row transition metals. In the electron-sea model, a metal crystal is viewed as a three-dimensional array of metal cations immersed in a sea of delocalised valence…

  8. The electrical conductivity and surface conduction of consolidated rock cores.

    Science.gov (United States)

    Alkafeef, Saad F; Alajmi, Abdullah F

    2007-05-15

    A fully computerized high-pressure and high-temperature core holder device is simultaneously used to determine the electrical conductivity, zeta potential, and surface conductivity of consolidated rock cores in aqueous and nonaqueous systems. The total electrical conductivity of rock cores was determined by coupling streaming current and potential measurements. This shows that neglecting the surface conductivity Ksigma is crucial to converting the streaming potential into zeta potentials. It is observed that plots of the core total conductivity as a function of the electrolyte conductivity KL exhibit two behaviors. At low ionic strength, the core conductivity clearly depends on the contribution of surface conductivity behind the slip plane, whereas at higher ionic strength, the magnitude of the surface conductivity becomes negligible. The electrical conductivity of rock cores was found to be in good agreement with the O'Brien theory and the Briggs method. The contribution of the stagnant layer to the surface conductivity in nonaqueous systems has been shown to be significant. This shows that the stagnant layer displays significantly different behavior in different nonaqueous systems, depending on the core porosity and the double-layer overlap. The results indicate that the application of electrokinetics in petroleum reservoirs can provide important insights into reservoir fluid flow characterization.

  9. Outside Mainstream Electronic Databases: Review of Studies Conducted in the USSR and Post-Soviet Countries on Electric Current-Assisted Consolidation of Powder Materials

    Directory of Open Access Journals (Sweden)

    Eugene G. Grigoryev

    2013-09-01

    Full Text Available This paper reviews research articles published in the former USSR and post-soviet countries on the consolidation of powder materials using electric current that passes through the powder sample and/or a conductive die-punch set-up. Having been published in Russian, many of the reviewed papers are not included in the mainstream electronic databases of the scientific articles and thus are not known to the scientific community. The present review is aimed at filling this information gap. In the paper, the electric current-assisted sintering techniques based on high- and low-voltage approaches are presented. The main results of the theoretical modeling of the processes of electromagnetic field-assisted consolidation of powder materials are discussed. Sintering experiments and related equipment are described and the major experimental results are analyzed. Sintering conditions required to achieve the desired properties of the sintered materials are provided for selected material systems. Tooling materials used in the electric current-assisted consolidation set-ups are also described.

  10. Outside Mainstream Electronic Databases: Review of Studies Conducted in the USSR and Post-Soviet Countries on Electric Current-Assisted Consolidation of Powder Materials

    Science.gov (United States)

    Olevsky, Eugene A.; Aleksandrova, Elena V.; Ilyina, Alexandra M.; Dudina, Dina V.; Novoselov, Alexander N.; Pelve, Kirill Y.; Grigoryev, Eugene G.

    2013-01-01

    This paper reviews research articles published in the former USSR and post-soviet countries on the consolidation of powder materials using electric current that passes through the powder sample and/or a conductive die-punch set-up. Having been published in Russian, many of the reviewed papers are not included in the mainstream electronic databases of the scientific articles and thus are not known to the scientific community. The present review is aimed at filling this information gap. In the paper, the electric current-assisted sintering techniques based on high- and low-voltage approaches are presented. The main results of the theoretical modeling of the processes of electromagnetic field-assisted consolidation of powder materials are discussed. Sintering experiments and related equipment are described and the major experimental results are analyzed. Sintering conditions required to achieve the desired properties of the sintered materials are provided for selected material systems. Tooling materials used in the electric current-assisted consolidation set-ups are also described. PMID:28788337

  11. Contact-independent electrical conductance measurement

    Energy Technology Data Exchange (ETDEWEB)

    Mentzel, Tamar S.; MacLean, Kenneth; Kastner, Marc A.; Ray, Nirat

    2017-01-24

    Electrical conductance measurement system including a one-dimensional semiconducting channel, with electrical conductance sensitive to electrostatic fluctuations, in a circuit for measuring channel electrical current. An electrically-conductive element is disposed at a location at which the element is capacitively coupled to the channel; a midpoint of the element aligned with about a midpoint of the channel, and connected to first and second electrically-conductive contact pads that are together in a circuit connected to apply a changing voltage across the element. The electrically-conductive contact pads are laterally spaced from the midpoint of the element by a distance of at least about three times a screening length of the element, given in SI units as (K.di-elect cons..sub.0/e.sup.2D(E.sub.F)).sup.1/2, where K is the static dielectric constant, .di-elect cons..sub.0 is the permittivity of free space, e is electron charge, and D(E.sub.F) is the density of states at the Fermi energy for the element.

  12. Electrical conduction in transition-metal salts

    Energy Technology Data Exchange (ETDEWEB)

    Grado-Caffaro, M.A.; Grado-Caffaro, M. [Scientific Consultants, Madrid (Spain)

    2016-08-01

    We predict that a given transition-metal salt as, for example, a K{sub 2}CuCl{sub 4}.2H{sub 2}O-type compound, can behave as an electrical conductor in the paramagnetic case. In fact, we determine the electrical conductance in a salt of this type. This conductance is found to be quantised in agreement with previous well-known results. Related mathematical expressions in the context of superexchange interaction are obtained. In addition, we determine the corresponding (macroscopically viewed) current density and the associated electron wave functions.

  13. Thermal dilepton rate and electrical conductivity: An analysis of vector current correlation functions in quenched lattice QCD

    CERN Document Server

    Ding, H -T; Kaczmarek, O; Karsch, F; Laermann, E; Soeldner, W

    2010-01-01

    We calculate the vector current correlation function for light valence quarks in the deconfined phase of QCD. The calculations have been performed in quenched lattice QCD at T=1.45 Tc for four values of the lattice cut-off on lattices up to size 128^3x48. This allows to perform a continuum extrapolation of the correlation function in the Euclidean time interval tau*T -in [0.2, 0.5], which extends to the largest temporal separations possible at finite temperature, to better than 1% accuracy. In this interval, at the value of the temperature investigated, we find that the vector correlation function never deviates from the free correlator for massless quarks by more than 9%. We also determine the first two non-vanishing thermal moments of the vector meson spectral function. The second thermal moment deviates by less than 7% from the free value. With these constraints, we then proceed to extract information on the spectral representation of the vector correlator and discuss resulting consequences for the electri...

  14. Pulsed electrical discharge in conductive solution

    Science.gov (United States)

    Panov, V. A.; Vasilyak, L. M.; Vetchinin, S. P.; Pecherkin, V. Ya; Son, E. E.

    2016-09-01

    Electrical discharge in a conductive solution of isopropyl alcohol in tap water (330 μ S cm-1) has been studied experimentally applying high voltage millisecond pulses (rise time  ˜0.4 μ \\text{s} , amplitude up to 15 kV, positive polarity) to a pin anode electrode. Dynamic current-voltage characteristics synchronized with high-speed images of the discharge were studied. The discharge was found to develop from high electric field region in the anode vicinity where initial conductive current with density  ˜100 A cm-2 results in fast heating and massive nucleation of vapor bubbles. Discharges in nucleated bubbles then produce a highly conductive plasma region and facilitate overheating instability development with subsequent formation of a thermally ionized plasma channel. The measured plasma channel propagation speed was 3-15 m s-1. A proposed thermal model of plasma channel development explains the low observed plasma channel propagation speed.

  15. Electrical conduction of a XLPE nanocomposite

    Science.gov (United States)

    Park, Yong-Jun; Sim, Jae-Yong; Lim, Kee-Joe; Nam, Jin-Ho; Park, Wan-Gi

    2014-07-01

    The resistivity, breakdown strength, and formation of space charges are very important factors for insulation design of HVDC cable. It is known that a nano-sized metal-oxide inorganic filler reduces the formation of space charges in the polymer nanocomposite. Electrical conduction of cross-linked polyethylene(XLPE) nanocomposite insulating material is investigated in this paper. The conduction currents of two kinds of XLPE nanocomposites and XLPE without nano-filler were measured at temperature of 303 ~ 363 K under the applied electric fields of 10 ~ 50 kV/mm. The current of the nanocomposite specimen is smaller than that of XLPE specimen without nano-filler. The conduction mechanism may be explained in terms of Schottky emission and multi-core model.

  16. Direct current hopping conductance along DNA chain

    Institute of Scientific and Technical Information of China (English)

    Ma Song-Shan; Xu Hui; Liu Xiao-Liang; Li Ming-Jun

    2007-01-01

    This paper proposes a model of direct current(DC) electron hopping transport in DNA,in which DNA is considered as a binary one-dimensional disordered system.To quantitatively study the DC conductivity in DNA,it numerically calculates the DC conductivity of DNA chains with difierent parameter values.The result shows that the DC conductivity of DNA chain increases with the increase of temperature.And the conductivity of DNA chain is depended on the probability P.which represents the degree of compositional disorder in a DNA sequence to some extent.For P<0.5,the conductivity of DNA chain decreases with the increase of P,while for P≥0.5,the conductivity increases with the increase of p.The DC conductivity in DNA chain also varies with the change of the electric field,it presents non-Ohm's law conductivity characteristics.

  17. The distinctions between the electrical conductivities under non-contact and contact current excitation in spin–split two-dimensional conductors

    Energy Technology Data Exchange (ETDEWEB)

    Kopeliovich, A.I. [B. Verkin Institute for Low Temperature Physics & Engineering, NAS of Ukraine (Ukraine); Pyshkin, P.V., E-mail: pavel.pyshkin@gmail.com [Ikerbasque, Basque Foundation for Science 48011, Bilbao (Spain); Department of Theoretical Physics and History of Science, The Basque Country University (EHU/UPV), PO Box 644, 48080 Bilbao (Spain); Kalinenko, A.N.; Yanovsky, A.V. [B. Verkin Institute for Low Temperature Physics & Engineering, NAS of Ukraine (Ukraine)

    2016-02-15

    It is shown that the normal electron–electron scattering is a source of electrical resistance on non-contact current excitation in two-dimensional spin–split electron systems. In contrast to the contact current injection, non-contact current excitation causes spatially inhomogeneous polarization in a two-dimensional conductor leading to new resistivity mechanisms.

  18. Electrical Conductivity of the Carbon Fiber Conductive Concrete

    Institute of Scientific and Technical Information of China (English)

    HOU Zuofu; LI Zhuoqiu; WANG Jianjun

    2007-01-01

    This paper discussed two methods to enhance the electrical conductivity of the carbon fiber(CF) electrically conductive concrete. The increase in the content of stone and the amount of water used to dissolve the methylcellulose and marinate the carbon fibers can decrease the electrical resistivity of the electrically conductive concrete effectively. Based on these two methods, the minimum CF content of the CF electrically conductive concrete for deicing or snow-melting application and the optimal ratio of the amount of water to dissolve the methylcellulose and marinate the carbon fibers were obtained.

  19. Corrosion Protection of Electrically Conductive Surfaces

    OpenAIRE

    Jian Song; Liangliang Wang; Andre Zibart; Christian Koch

    2012-01-01

    The basic function of the electrically conductive surface of electrical contacts is electrical conduction. The electrical conductivity of contact materials can be largely reduced by corrosion and in order to avoid corrosion, protective coatings must be used. Another phenomenon that leads to increasing contact resistance is fretting corrosion. Fretting corrosion is the degradation mechanism of surface material, which causes increasing contact resistance. Fretting corrosion occurs when there is...

  20. Damage Detection in Electrically Conductive Structures

    Science.gov (United States)

    Anderson, Todd A.

    2002-12-01

    High-technology systems are in need of structures that perform with increased functionality and a reduction in weight, while simultaneously maintaining a high level of performance and reliability. To accomplish this, structural elements must be designed more efficiently and with increased functionality, thereby creating multifunctional structures (MFS). Through the addition of carbon fibers, nanotubes, or particles, composite structures can be made electrically conductive while simultaneously increasing their strength and stiffness to weight ratios. Using the electrical properties of these structures for the purpose of damage detection and location for health and usage monitoring is of particular interest for aerospace structures. One such method for doing this is Electrical Impedance Tomography (EIT). With EIT, an electric current is applied through a pair of electrodes and the electric potential is recorded at other monitoring electrodes around the area of study. An inverse solution of the governing Maxwell equations is then required to determine the conductivities of discrete areas within the region of interest. However, this method is nearly ill-posed and computationally intensive as it focuses on imaging small changes in conductivity within the region of interest. For locating damage in a medium with an otherwise homogeneous conductivity, an alternative approach is to search for parameters such as the damage location and size. Towards those ends, this study develops an Artificial Neural Network (ANN) to determine the state of an electrically conductive region based on applied reference current and electrical potentials at electrodes around the periphery of the region. A significant benefit of the ANN approach is that once trained, the solution of an inverse problem does not require costly computations of the inverse problem. This method also takes advantage of the pattern recognition abilities of neural networks and is a robust solution method in the presence

  1. Effective electrical conductivity of a nonuniform plasma

    Science.gov (United States)

    Nichols, L. D.

    1975-01-01

    A simple nonuniformity model for calculating effective electrical conductivity and Hall parameter is proposed. The model shows that the effective conductivity can be significantly reduced by nonuniformities in the Hall parameter, even if the local conductivity is uniform.

  2. Behavior of Electric Current Subjected to ELF Electromagnetic Radiation

    CERN Document Server

    De Aquino, F

    2002-01-01

    Gravitational effects produced by ELF electromagnetic radiation upon the electric current in a conductor are studied. It is demonstrated that flux from high power density ELF radiation will cause transitory interruptions in electric current conduction.

  3. Corrosion Protection of Electrically Conductive Surfaces

    Directory of Open Access Journals (Sweden)

    Jian Song

    2012-11-01

    Full Text Available The basic function of the electrically conductive surface of electrical contacts is electrical conduction. The electrical conductivity of contact materials can be largely reduced by corrosion and in order to avoid corrosion, protective coatings must be used. Another phenomenon that leads to increasing contact resistance is fretting corrosion. Fretting corrosion is the degradation mechanism of surface material, which causes increasing contact resistance. Fretting corrosion occurs when there is a relative movement between electrical contacts with surfaces of ignoble metal. Avoiding fretting corrosion is therefore extremely challenging in electronic devices with pluggable electrical connections. Gold is one of the most commonly used noble plating materials for high performance electrical contacts because of its high corrosion resistance and its good and stable electrical behavior. The authors have investigated different ways to minimize the consumption of gold for electrical contacts and to improve the performance of gold plating. Other plating materials often used for corrosion protection of electrically conductive surfaces are tin, nickel, silver and palladium. This paper will deal with properties and new research results of different plating materials in addition to other means used for corrosion protection of electrically conductive surfaces and the testing of corrosion resistance of electrically conductive surfaces.

  4. Electrical Conductivity of Aluminium Alloy Foams

    Institute of Scientific and Technical Information of China (English)

    凤仪; 郑海务; 朱震刚; 祖方遒

    2002-01-01

    Closed-cell aluminium alloy foams were produced using the powder metallurgical technique. The effect of porosityand cell diameter on the electrical conductivity of foams was investigated and the results were compared with anumber of models. It was found that the percolation theory can be successfully applied to describe the dependenceof the electrical conductivity of aluminium alloy foams on the relative density. The cell diameter has a negligibleeffect on the electrical conductivity of foams.

  5. Nonlinear conductivity and the ringdown of currents in metallic holography

    CERN Document Server

    Withers, Benjamin

    2016-01-01

    We study the electric and heat current response resulting from an electric field quench in a holographic model of momentum relaxation at nonzero charge density. After turning the electric field off, currents return to equilibrium as governed by the vector quasi-normal modes of the dual black brane, whose spectrum depends qualitatively on a parameter controlling the strength of inhomogeneity. We explore the dynamical phase diagram as a function of this parameter, showing that signatures of incoherent transport become identifiable as an oscillatory ringdown of the heat current. We also study nonlinear conductivity by holding the electric field constant. For small electric fields a balance is reached between the driving electric field and the momentum sink -- a steady state described by DC linear response. For large electric fields Joule heating becomes important and the black branes exhibit significant time dependence. In a regime where the rate of temperature increase is small, the nonlinear electrical conduct...

  6. Measurements of the vertical atmospheric electric field and of the electrical conductivity with stratospheric balloons

    Science.gov (United States)

    Iversen, I. B.; Madsen, M. M.; Dangelo, N.

    1985-01-01

    Measurements of the atmospheric (vertical) electric field with balloons in the stratosphere are reported. The atmospheric electrical conductivity is also measured and the current density inferred. The average vertical current shows the expected variation with universal time and is also seen to be influenced by external (magnetospheric) electric fields.

  7. Electrical conductivity of water-bearing magmas

    Science.gov (United States)

    Gaillard, F.

    2003-04-01

    Phase diagrams and chemical analyzes of crystals and glass inclusions of erupted lavas tell us that most explosive volcanic eruptions were caused by extremely water-rich pre-eruptive conditions. Volcanologists estimate volcanic hazards by the pre-eruptive water content of lavas erupted in the past and they hypothesize that future eruptions should show similar features. Alternatively, the development of methods allowing direct estimation of water content of magmas stored in the Earth’s interior would have the advantage of providing direct constraints about upcoming rather than past eruptions. Geoelectrical sounding, being the most sensitive probe to the chemical state of the Earth’s interior, seems a promising tool providing that its interpretation is based on relevant laboratory constraints. However, the current database of electrical conductivity of silicate melt merely constrains anhydrous composition. We have therefore undertaken an experimental program aiming at elucidating the effect of water on the electrical conductivity of natural magmas. Measurements (impedance spectroscopy) are performed using a two electrodes set-up in an internally heated pressure vessel. The explored temperature and pressure range is 25-1350°C and 0.1-400MPa. The material used is a natural rhyolitic obsidian. Hydration of this rhyolite is first performed in Pt capsules with 0.5, 1, 2 and 6wt% of water. In a second step, the conductivity measurements are performed at pressure and temperature in a modified Pt capsule. One end of the capsule is arc-welded whereas the other end is closed with the help of a BN cone and cement through which an inner electrode is introduced in the form a Pt wire. The capsule is used as outer electrode. The electrical cell has therefore a radial geometry. The rhyolite is introduced in the cell in the form of a cylinder drilled in the previously hydrated glass. At dwell condition, the melt is sandwiched between two slices of quartz avoiding any deformation

  8. Bounding the current in nonlinear conducting composites

    Science.gov (United States)

    Milton, Graeme W.; Serkov, Sergey K.

    2000-06-01

    Suppose a three-dimensional composite of two nonlinear conducting phases mixed in fixed proportions is subject to a fixed average electric field. What values can the average current take as the microstructure varies over all configurations? What microstructures produce the maximum or minimum current flow? Which microstructures are best for guiding the current in a given direction? Here, following the compensated compactness method of Tartar (1977: Estimation de coefficients homogénéisés. In: Glowinski, R., Lions, J.-L. (Eds.), Computer Methods in Applied Sciences and Engineering, Springer-Verlag Lecture Notes in Mathematics 704. Springer-Verlag, Berlin, pp. 136-212) we show how one can obtain remarkably tight bounds on the average current flow. In many, but not all cases, we find that simple laminate structures produce the maximum or minimum current flow, and are best for guiding the current in a given direction. Sometimes it is advantageous to orient the layer surfaces parallel (rather than orthogonal) to the direction of the applied field to generate the minimum current flow in that direction.

  9. [Myocardial infarction after conduction electrical weapon shock].

    Science.gov (United States)

    Ben Ahmed, H; Bouzouita, K; Selmi, K; Chelli, M; Mokaddem, A; Ben Ameur, Y; Boujnah, M R

    2013-04-01

    Controversy persists over the safety of conducted electrical weapons, which are increasingly used by law enforcement agencies around the world. We report a case of 33-year-old man who had an acute inferior myocardial infarction after he was shot in the chest with an electrical weapon. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  10. Theory of electrical conductivities of ferrogels

    CERN Document Server

    Huang, J P

    2004-01-01

    Conductive organic polymers can be formulated with polymers that incorporate fine dispersed metallic particles. In this work, we present a general model for ferrogels which are chemically cross-linked polymer networks swollen with a ferrofluid. Our aim is to study the effect of the shape and/or material (conductivity) anisotropy on the effective electrical conductivity of the ferrogel in the presence of an external magnetic field. Our theory can reproduce the known results, and provides a link between the particle property and orientation distribution and the effective electrical conductivity. To this end, we find that material (conductivity) anisotropies are more important to yield a high effective electrical conductivity than shape anisotropies, while magnetic fields can offer a correction.

  11. Thermodynamic parameters of elasticity and electrical conductivity ...

    African Journals Online (AJOL)

    Thermodynamic parameters of elasticity and electrical conductivity of reinforced natural rubber (nr) vulca nizates. ... Bulletin of the Chemical Society of Ethiopia ... The thermodynamic parameters (change in free energy of elasticity, DGe; ...

  12. The electrical conduction variation in stained carbon nanotubes

    Science.gov (United States)

    Sun, Shih-Jye; Wei Fan, Jun; Lin, Chung-Yi

    2012-01-01

    Carbon nanotubes become stained from coupling with foreign molecules, especially from adsorbing gas molecules. The charge exchange, which is due to the orbital hybridization, occurred in the stained carbon nanotube induces electrical dipoles that consequently vary the electrical conduction of the nanotube. We propose a microscopic model to evaluate the electrical current variation produced by the induced electrical dipoles in a stained zigzag carbon nanotube. It is found that stronger orbital hybridization strengths and larger orbital energy differences between the carbon nanotube and the gas molecules help increasing the induced electrical dipole moment. Compared with the stain-free carbon nanotube, the induced electrical dipoles suppress the current in the nanotube. In the carbon nanotubes with induced dipoles the current increases as a result of increasing orbital energy dispersion via stronger hybridization couplings. In particular, at a fixed hybridization coupling, the current increases with the bond length for the donor-carbon nanotube but reversely for the acceptor-carbon nanotube.

  13. Electrical Resistance Tomography of Conductive Thin Films

    CERN Document Server

    Cultrera, Alessandro

    2016-01-01

    The Electrical Resistance Tomography (ERT) technique is applied to the measurement of sheet conductance maps of both uniform and patterned conductive thin films. Images of the sheet conductance spatial distribution, and local conductivity values are obtained. Test samples are tin oxide films on glass substrates, with electrical contacts on the sample boundary, some samples are deliberately patterned in order to induce null conductivity zones of known geometry while others contain higher conductivity inclusions. Four-terminal resistance measurements among the contacts are performed with a scanning setup. The ERT reconstruction is performed by a numerical algorithm based on the total variation regularization and the L-curve method. ERT correctly images the sheet conductance spatial distribution of the samples. The reconstructed conductance values are in good quantitative agreement with independent measurements performed with the van der Pauw and the four-point probe methods.

  14. DNA Generated Electric Current Biosensor.

    Science.gov (United States)

    Hu, Lanshuang; Hu, Shengqiang; Guo, Linyan; Shen, Congcong; Yang, Minghui; Rasooly, Avraham

    2017-02-21

    In addition to its primary function as a genetic material, deoxyribonucleic acid (DNA) is also a potential biologic energy source for molecular electronics. For the first time, we demonstrate that DNA can generate a redox electric current. As an example of this new functionality, DNA generated redox current was used for electrochemical detection of human epidermal growth factor receptor 2 (HER2), a clinically important breast cancer biomarker. To induce redox current, the phosphate of the single stranded DNA aptamer backbone was reacted with molybdate to form redox molybdophosphate precipitate and generate an electrochemical current of ∼16.8 μA/μM cm(2). This detection of HER2 was performed using a sandwich detection assay. A HER2 specific peptide was immobilized onto a gold electrode surface for capturing HER2 in buffer and serum. The HER2 specific aptamer was used as both ligand to bind the captured HER2 and to generate a redox current signal. When tested for HER2 detection, the electrochemical current generated by the aptasensor was proportional to HER2 concentration in the range of 0.01 to 5 ng/mL, with a current generated in the range of ∼6.37 to 31.8 μA/cm(2) in both buffer and serum. This detection level is within the clinically relevant range of HER2 concentrations. This method of electrochemical signal amplification greatly simplifies the signal transduction of aptasensors, broadening their use for HER2 analysis. This novel approach of using the same aptamer as biosensor ligand and as transducer can be universally extended to other aptasensors for a wide array of biodetection applications. Moreover, electric currents generated by DNA or other nucleic acids can be used in molecular electronics or implanted devices for both power generation and measurement of output.

  15. An experimental investigation of electrical conductivities in biopolymers

    Indian Academy of Sciences (India)

    H Mallick; A Sarkar

    2000-08-01

    Gum arabica obtained from acacia plant is a conducting biopolymer. Experiments are carried out on this natural gum arabica. In the present study TGA, ion transference number, transient ionic current, thermal analysis, frequency and temperature variation of a.c. conductivity, Arrhenius plot and volt–ampere characteristics of specimens are carried out. The total electrical conductivity of these biopolymers are comparable to that of synthetic polymers doped with inorganic salts. The ion transference number of these biopolymers show their superionic nature of electrical conduction. The overall conduction mechanism seems to be protonic in nature rather than electronic one.

  16. Local electric conductive property of Si nanowire models

    Directory of Open Access Journals (Sweden)

    Yuji Ikeda

    2012-12-01

    Full Text Available Local electric conductive properties of Si nanowire models are investigated by using two local electric conductivity tensors, σ↔ ext (r⃗ and σ↔ int (r⃗, defined in Rigged QED. It is emphasized that σ↔ int (r⃗ is defined as the response of electric current to the actual electric field at a specific point and does not have corresponding macroscopic physical quantity. For the Si nanowire models, there are regions which show complicated response of electric current density to electric field, in particular, opposite and rotational ones. Local conductivities are considered to be available for the study of a negative differential resistance (NDR, which may be related to this opposite response. It is found that σ↔ int (r⃗ shows quite different pattern from σ↔ ext (r⃗, local electric conductivity defined for the external electric field. The effects of impurities are also studied by using the model including a Ge atom, in terms of the local response to electric field. It is found that the difference from the pristine model is found mainly around the Ge atom.

  17. Electric Current Circuits in Astrophysics

    CERN Document Server

    Kuijpers, Jan; Fletcher, Lyndsay

    2014-01-01

    Cosmic magnetic structures have in common that they are anchored in a dynamo, that an external driver converts kinetic energy into internal magnetic energy, that this magnetic energy is transported as Poynting flux across the magnetically dominated structure, and that the magnetic energy is released in the form of particle acceleration, heating, bulk motion, MHD waves, and radiation. The investigation of the electric current system is particularly illuminating as to the course of events and the physics involved. We demonstrate this for the radio pulsar wind, the solar flare, and terrestrial magnetic storms.

  18. Electrically conductive and thermally conductive materials for electronic packaging

    Science.gov (United States)

    Liu, Zongrong

    The aim of this dissertation is to develop electrically or thermally conductive materials that are needed for electronic packaging and microelectronic cooling. These materials are in the form of coatings and are made from pastes. The research work encompasses paste formulation, studying the process of converting a paste to a conductive material, relating the processing conditions to the structure and performance, and evaluating performance attributes that are relevant to the application of these conductive materials. The research has resulted in new information that is valuable to the microelectronic industry. Work on electrically conductive materials emphasizes the development of electrical interconnection materials in the form of air-firable glass-free silver-based electrically conductive thick films, which use the Ti-Al alloy as the binder and are in contrast to conventional films that use glass as the binder. The air-firability, as enabled by minor additions of tin and zinc to the paste, is in contrast to previous glass-free films that are not firable. The recommended firing condition is 930°C in air. The organic vehicle in the paste comprises ethyl cellulose, which undergoes thermal decomposition during burnout of the paste. The ethyl cellulose is dissolved in ether, which facilitates the burnout. Excessive ethyl cellulose hinders the burnout. A higher heating rate results in more residue after burnout. The presence of silver particles facilitates drying and burnout. Firing in air gives lower resistivity than firing in oxygen. Firing in argon gives poor films. Compared to conventional films that use glass as the binder, these films, when appropriately fired, exhibit lower electrical resistivity (2.5 x 10-6 O.cm) and higher scratch resistance. Work on thermally conductive materials addresses thermal interface materials, which are materials placed at the interface between a heat sink and a heat source for the purpose of improving the thermal contact. Heat

  19. Electrical conductivity of Cu-Li alloys

    Institute of Scientific and Technical Information of China (English)

    朱达川; 宋明昭; 陈家钊; 涂铭旌; 潘海滨

    2004-01-01

    The electrical conductivity of Cu-Li alloys was studied. And the distribution of electrons near Fermi surface was detected by synchrotron radiation instrument. The results show that the electrical conductivity of Cu-Li alloys decreases from 5. 22 × 10-9 S/m to 3. 69 × 10-9 S/m with the increase of Li content. Li can decrease the oxygen, sulfur and other impurities content in commercial Cu, but Li dissolved in Cu lattice leads to distortion of Cu lattice from 0. 005 %-0. 050 %, affects the valence band of Cu, increases the binding energy of surface electron, and decreases the electron density of Fermi surface simultaneously. So the electrical conductivity decreases gradually with the increase of Li content.

  20. Effect of Crystallinity on Electrical Conduction in Polypropylene

    Science.gov (United States)

    Ikezaki, Kazuo; Kaneko, Takanobu; Sakakibara, Toshio

    1981-03-01

    The electrical conduction of 20 μm thick polypropylene films with different crystallinities has been studied at 72°C below 400 kV/cm. The field dependence of the current shows that the conduction mechanism in this polymer is ion hopping. The estimated ionic jump distance strongly depends on the polymer crystallinity, and it decreases from 100 Å to 45 Å as the crystallinity increases from 50.5% to 78%. Preheating of samples seriously affects the electrical conduction in polypropylene, so differences in conductivity, activation energy and jump distance obtained by different authors can be explained partly by differences in the thermal history of the samples used.

  1. Behavior of Electric Current Subjected to ELF Electromagnetic Radiation

    OpenAIRE

    De Aquino, Fran

    2002-01-01

    Gravitational effects produced by ELF electromagnetic radiation upon the electric current in a conductor are studied. An apparatus has been constructed to test the behavior of current subjected to ELF radiation. The experimental results are in agreement with theoretical predictions and show that ELF radiation can cause transitory interruptions in electric current conduction.

  2. Electrical conductivity of individual polypyrrole microtube

    Institute of Scientific and Technical Information of China (English)

    Long Yun-Ze; Xiao Hong-Mei; Chen Zhao-Jia; Wan Mei-Xiang; Jin Ai-Zi; Gu Chang-Zhi

    2004-01-01

    Conducting microtubes (0.4-0.5μm in outer diameter) made of polypyrrole (PPy) doped with p-toluene sulfonic acid (PTSA) were synthesized by a self-assembly method. We report the electrical conductivity of an individual PPy microtube, on which a pair of platinum micro-leads was fabricated bv focused ion beam deposition. The measured room-temperature conductivity of the individual PPy microtube was 0.29S/cm, which is comparable to that of templatesynthesized PPy micro/nanotubes. The temperature dependence of conductivity of the individual microtube follows the three-dimensional variable-range hopping (3D VRH) model.

  3. Nonlinear conductivity and the ringdown of currents in metallic holography

    Science.gov (United States)

    Withers, Benjamin

    2016-10-01

    We study the electric and heat current response resulting from an electric field quench in a holographic model of momentum relaxation at nonzero charge density. After turning the electric field off, currents return to equilibrium as governed by the vector quasi-normal modes of the dual black brane, whose spectrum depends qualitatively on a parameter controlling the strength of inhomogeneity. We explore the dynamical phase diagram as a function of this parameter, showing that signatures of incoherent transport become identifiable as an oscillatory ringdown of the heat current. We also study nonlinear conductivity by holding the electric field constant. For small electric fields a balance is reached between the driving electric field and the momentum sink — a steady state described by DC linear response. For large electric fields Joule heating becomes important and the black branes exhibit significant time dependence. In a regime where the rate of temperature increase is small, the nonlinear electrical conductivity is well approximated by the DC linear response calculation at an appropriate effective temperature.

  4. Electrical conductivity of metal powders under pressure

    Energy Technology Data Exchange (ETDEWEB)

    Montes, J.M.; Cintas, J.; Urban, P. [Universidad de Sevilla, Department of Mechanical and Materials Engineering Escuela Tecnica Superior de Ingenieria, Sevilla (Spain); Cuevas, F.G. [Universidad de Huelva, Department of Chemistry and Materials Science Escuela Tecnica Superior de Ingenieria, Palos de la Frontera (Spain)

    2011-12-15

    A model for calculating the electrical conductivity of a compressed powder mass consisting of oxide-coated metal particles has been derived. A theoretical tool previously developed by the authors, the so-called 'equivalent simple cubic system', was used in the model deduction. This tool is based on relating the actual powder system to an equivalent one consisting of deforming spheres packed in a simple cubic lattice, which is much easier to examine. The proposed model relates the effective electrical conductivity of the powder mass under compression to its level of porosity. Other physically measurable parameters in the model are the conductivities of the metal and oxide constituting the powder particles, their radii, the mean thickness of the oxide layer and the tap porosity of the powder. Two additional parameters controlling the effect of the descaling of the particle oxide layer were empirically introduced. The proposed model was experimentally verified by measurements of the electrical conductivity of aluminium, bronze, iron, nickel and titanium powders under pressure. The consistency between theoretical predictions and experimental results was reasonably good in all cases. (orig.)

  5. The electrical conductivity of polycrystalline metallic films

    Science.gov (United States)

    Moraga, Luis; Arenas, Claudio; Henriquez, Ricardo; Bravo, Sergio; Solis, Basilio

    2016-10-01

    We calculate the electrical conductivity of polycrystalline metallic films by means of a semi-numerical procedure that provides solutions of the Boltzmann transport equation, that are essentially exact, by summing over classical trajectories according to Chambers' method. Following Mayadas and Shatzkes (MS), grain boundaries are modeled as an array of parallel plane barriers situated perpendicularly to the direction of the current. Alternatively, according to Szczyrbowski and Schmalzbauer (SS), the model consists in a triple array of these barriers in mutual perpendicular directions. The effects of surface roughness are described by means of Fuchs' specularity parameters. Following SS, the scattering properties of grain boundaries are taken into account by means of another specularity parameter and a probability of coherent passage. The difference between the sum of these and one is the probability of diffuse scattering. When this formalism is compared with the approximate formula of Mayadas and Shatzkes (Phys. Rev. B 1, 103 (1986)) it is shown that the latter greatly overestimates the film resistivity over most values of the reflectivity of the grain boundaries. The dependence of the conductivity of thin films on the probability of coherent passage and grain diameters is examined. In accordance with MS we find that the effects of disorder in the distribution of grain diameters is quite small. Moreover, we find that it is not safe to neglect the effects of the scattering by the additional interfaces created by stacked grains. However, when compared with recent resitivity-thickness data, it is shown that all three formalisms can provide accurate fits to experiment. In addition, it is shown that, depending on the respective reflectivities and distance from a surface, some of these interfaces may increase or diminish considerably the conductivity of the sample. As an illustration of this effect, we show a tentative fit of resistivity data of gold films measured by

  6. Lower Bound of Electrical Conductivity from Holography

    CERN Document Server

    Ge, Xian-Hui; Wu, Shao-Feng

    2015-01-01

    We propose a universal lower bound of dc electrical conductivity in rotational- and translational- symmetries breaking systems via the holographic duality. This bound predicts that BTZ-black brane can be easily used to realize linear temperature resistivity. We also construct an anisotropic black brane solution, which yields linear temperature for the in-plane resistivity and insulating behavior for the out-of-plane resistivity. Ultimately, we discuss its implications in experiments.

  7. DC electrical conductivity study of cerium doped conducting glass systems

    Science.gov (United States)

    Barde, R. V.; Waghuley, S. A.

    2013-06-01

    The glass samples of composition 60V2O5-5P2O5-(35-x)B2O3-xCeO2, (1 ≤ x ≤ 5) were prepared by the conventional melt quench method. The samples were characterized by X-ray diffraction and thermo gravimetric-differential thermal analysis. The glass transition temperature and crystallization temperature determined from TG-DTA analysis. The DC electrical conductivity has been carried out in the temperature range 303-473 K. The maximum conductivity and minimum activation energy were found to be 0.039 Scm-1 and 0.15 eV at 473 K for x=1, respectively.

  8. Current distribution in conducting nanowire networks

    Science.gov (United States)

    Kumar, Ankush; Vidhyadhiraja, N. S.; Kulkarni, Giridhar U.

    2017-07-01

    Conducting nanowire networks find diverse applications in solar cells, touch-screens, transparent heaters, sensors, and various related transparent conducting electrode (TCE) devices. The performances of these devices depend on effective resistance, transmittance, and local current distribution in these networks. Although, there have been rigorous studies addressing resistance and transmittance in TCE, not much attention is paid on studying the distribution of current. Present work addresses this compelling issue of understanding current distribution in TCE networks using analytical as well as Monte-Carlo approaches. We quantified the current carrying backbone region against isolated and dangling regions as a function of wire density (ranging from percolation threshold to many multiples of threshold) and compared the wired connectivity with those obtained from template-based methods. Further, the current distribution in the obtained backbone is studied using Kirchhoff's law, which reveals that a significant fraction of the backbone (which is believed to be an active current component) may not be active for end-to-end current transport due to the formation of intervening circular loops. The study shows that conducting wire based networks possess hot spots (extremely high current carrying regions) which can be potential sources of failure. The fraction of these hot spots is found to decrease with increase in wire density, while they are completely absent in template based networks. Thus, the present work discusses unexplored issues related to current distribution in conducting networks, which are necessary to choose the optimum network for best TCE applications.

  9. Lorentz force sigmometry: A contactless method for electrical conductivity measurements

    Science.gov (United States)

    Uhlig, Robert P.; Zec, Mladen; Ziolkowski, Marek; Brauer, Hartmut; Thess, André

    2012-05-01

    The present communication reports a new technique for the contactless measurement of the specific electrical conductivity of a solid body or an electrically conducting fluid. We term the technique "Lorentz force sigmometry" where the neologism "sigmometry" is derived from the Greek letter sigma, often used to denote the electrical conductivity. Lorentz force sigmometry (LoFoS) is based on similar principles as the traditional eddy current testing but allows a larger penetration depth and is less sensitive to variations in the distance between the sensor and the sample. We formulate the theory of LoFoS and compute the calibration function which is necessary for determining the unknown electrical conductivity from measurements of the Lorentz force. We conduct a series of experiments which demonstrate that the measured Lorentz forces are in excellent agreement with the numerical predictions. Applying this technique to an aluminum sample with a known electrical conductivity of σAl=20.4MS/m and to a copper sample with σCu=57.92MS/m we obtain σAl=21.59MS/m and σCu=60.08MS/m, respectively. This demonstrates that LoFoS is a convenient and accurate technique that may find application in process control and thermo-physical property measurements for solid and liquid conductors.

  10. Finite Element Model of Cardiac Electrical Conduction.

    Science.gov (United States)

    Yin, John Zhihao

    1994-01-01

    In this thesis, we develop mathematical models to study electrical conduction of the heart. One important pattern of wave propagation of electrical excitation in the heart is reentry which is believed to be the underlying mechanism of some dangerous cardiac arhythmias such as ventricular tachycardia and ventricular fibrillation. We present in this thesis a new ionic channel model of the ventricular cardiac cell membrane to study the microscopic electrical properties of myocardium. We base our model on recent single channel experiment data and a simple physical diffusion model of the calcium channel. Our ionic channel model of myocardium has simpler differential equations and fewer parameters than previous models. Further more, our ionic channel model achieves better results in simulating the strength-interval curve when we connect the membrane patch model to form a one dimensional cardiac muscle strand. We go on to study a finite element model which uses multiple states and non-nearest neighbor interactions to include curvature and dispersion effects. We create a generalized lattice randomization to overcome the artifacts generated by the interaction between the local dynamics and the regularities of the square lattice. We show that the homogeneous model does not display spontaneous wavefront breakup in a reentrant wave propagation once the lattice artifacts have been smoothed out by lattice randomization with a randomization scale larger than the characteristic length of the interaction. We further develop a finite 3-D 3-state heart model which employs a probability interaction rule. This model is applied to the simulation of Body Surface Laplacian Mapping (BSLM) using a cylindrical volume conductor as the torso model. We show that BSLM has a higher spatial resolution than conventional mapping methods in revealing the underlying electrical activities of the heart. The results of these studies demonstrate that mathematical modeling and computer simulation are very

  11. Electrically Conductive Metal Nanowire Polymer Nanocomposites

    Science.gov (United States)

    Luo, Xiaoxiong

    This thesis investigates electrically conductive polymer nanocomposites formulated with metal nanowires for electrostatic discharge and electromagnetic interference shielding. Copper nanowires (CuNWs) of an average length of 1.98 mum and diameter of 25 +/- 4 nm were synthesized. The oxidation reaction of the CuNWs in air can be divided into two stages at weight of 111.2% on TGA curves. The isoconversional activation energies determined by Starink method were used to fit the different master plots. Johnson-Mehl-Avrami (JMA) equation gave the best fit. The surface atoms of the CuNWs are the sites for the random nucleation and the crystallite strain in the CuNWs is the driving force for the growth of nuclei mechanism during the oxidation process. To improve the anti-oxidation properties of the CuNWs, silver was coated onto the surface of the CuNWs in Ag-amine solution. The prepared silver coated CuNWs (AgCuNWs) with silver content of 66.52 wt. %, diameter of 28--33 nm exhibited improved anti-oxidation behavior. The electrical resistivity of the AgCuNW/low density polyethylene (LDPE) nanocomposites is lower than that of the CuNW/LDPE nanocomposites with the same volume percentage of fillers. The nanocomposites formulated with CuNWs and polyethylenes (PEs) were compared to study the different interaction between the CuNWs and the different types of PE matrices. The electrical conductivity of the different PE matrices filled with the same concentrations of CuNWs correlated well with the level of the CuNW dispersion. The intermolecular force and entanglement resulting from the different macromolecular structures such as molecular weight and branching played an important role in the dispersion, electrical properties and rheological behaviour of the CuNW/PE nanocomposites. Ferromagnetic polycrystalline nickel nanowires (NiNWs) were synthesized with uniform diameter of ca. 38 nm and an average length of 2.68 mum. The NiNW linear low density polyethylene (LLDPE

  12. Morphology and electrical conductivity of PACS

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Polyaluminium chlorides with sulfate ion(PACS) were prepared by using AlCl3· 6H2O, Al(SO4 )3· 18H2O and Na2CO3 as raw materials. The effects of basicity (r), Al3 +/SO42- molar ratio and aging time on the morphology of PACS were observed by transmission electrical microscope. The influence of aging time on charge neutralization and coagulation effect of PACS was studied.The effects of basicity (r), Al3+/SO42- molar ratio and aging time on the electrical conductivity of PACS solution were also investigated. The experimental results show that the degree of polymerization of polyaluminium chloride(PAC) increases when SO42-ion is added. The higher the basicity(r) and the longer the aging time, the larger the size of polymer PACS. The ability of PACS neutralizing the charge on Kaolinite decreases with the increase of aging time. The electrical conductivity of PACS solution (the concentration of Al3+ ion is 0.18 mol/L) with different aging time is the function of the basicity and Al3 +/SO42- molar ratios and has its maximum at r = 0.5 and Al3+/SO42- = 12.

  13. Electrical conductivity of sulfamic acid single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Varughese, G. [Department of Physics, Catholicate College, Pathanamthitta, Kerala (India); Iype, L. [School of Pure and Applied Physics, Mahatma Gandhi Unniversity, Kottayam, Kerala (India); Rajesh, R. [Department of Physics, N S S College, Manjeri, Malappuram, Kerala (India); Joseph, G. [Department of Physics, Sacred Heart College, Thevara, Cochin, Kerala (India); Louis, G. [Department of Physics, Cochin University of Science and Technology, Cochin, Kerala (India); Santhosh Kumar, A.

    2010-08-15

    Single crystals of sulfamic acid have been grown by the method of slow evaporation at constant temperature. DC electrical conductivity was measured in the temperature range 300 - 440 K along a, b and c-axes. Conductivity measurements show slope change near 330 K and 410 K. The slope change observed around 330 K may be attributed as due to a phase transition which has been well supported by the DSC and DTA measurements. Slope change observed around 410 K is attributed as the onset of the thermal decomcoposition as evidenced by TGA curve. TGA studies show the crystal is very stable up to 440 K. Activation energies for the conduction process are calculated for all measured crystallographic directions. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  14. Inductive Measurement of Plasma Jet Electrical Conductivity

    Science.gov (United States)

    Turner, Matthew W.; Hawk, Clark W.; Litchford, Ron J.

    2005-01-01

    An inductive probing scheme, originally developed for shock tube studies, has been adapted to measure explosive plasma jet conductivities. In this method, the perturbation of an applied magnetic field by a plasma jet induces a voltage in a search coil, which, in turn, can be used to infer electrical conductivity through the inversion of a Fredholm integral equation of the first kind. A 1-inch diameter probe was designed and constructed, and calibration was accomplished by firing an aluminum slug through the probe using a light-gas gun. Exploratory laboratory experiments were carried out using plasma jets expelled from 15-gram high explosive shaped charges. Measured conductivities were in the range of 3 kS/m for unseeded octol charges and 20 kS/m for seeded octol charges containing 2% potassium carbonate by mass.

  15. Electric Conductivity from the solution of the Relativistic Boltzmann Equation

    CERN Document Server

    Puglisi, A; Greco, V

    2014-01-01

    We present numerical results of electric conductivity $\\sigma_{el}$ of a fluid obtained solving the Relativistic Transport Boltzmann equation in a box with periodic boundary conditions. We compute $\\sigma_{el}$ using two methods: the definition itself, i.e. applying an external electric field, and the evaluation of the Green-Kubo relation based on the time evolution of the current-current correlator. We find a very good agreement between the two methods. We also compare numerical results with analytic formulas in Relaxation Time Approximation (RTA) where the relaxation time for $\\sigma_{el}$ is determined by the transport cross section $\\sigma_{tr}$, i.e. the differential cross section weighted with the collisional momentum transfer. We investigate the electric conductivity dependence on the microscopic details of the 2-body scatterings: isotropic and anisotropic cross-section, and massless and massive particles. We find that the RTA underestimates considerably $\\sigma_{el}$; for example at screening masses $...

  16. Universality of DC electrical conductivity from holography

    Science.gov (United States)

    Ge, Xian-Hui; Sin, Sang-Jin; Wu, Shao-Feng

    2017-04-01

    We propose a universal formula of dc electrical conductivity in rotational- and translational-symmetries breaking systems via the holographic duality. This formula states that the ratio of the determinant of the dc electrical conductivities along any spatial directions to the black hole area density in zero-charge limit has a universal value. As explicit illustrations, we give several examples elucidating the validation of this formula: We construct an anisotropic black brane solution, which yields linear in temperature for the in-plane resistivity and insulating behavior for the out-of-plane resistivity; We also construct a spatially isotropic black brane solution that both the linear-T and quadratic-T contributions to the resistivity can be realized. 1). For Z (ϕ) = 1 and d ≥ 3, isotropic black branes in the AdS space cannot be utilized to realize linear temperature resistivity in the zero-charges limit. Nevertheless, anisotropic black branes are good candidates in model-building of holographic strange metals. 2). For d + 1-dimensional spatially isotropic Lifshitz black holes with Z (ϕ) = 1 in the absence of hyperscaling violation, this relation indicates that σii|qi=0 =[ 4 π / (d + z - 1) ] d - 3T (d - 3) / z, which is consistent with what obtained in Refs. [23,24] based on a universal scaling relation hypothesis: σ (ω = 0) =T (d - 3) / z Θ (0), where z is a dynamical critical exponent and Θ (ω) is a frequency dependent function. 3). This relation applies to shear viscosity-bound and electrical conductivity-bound violated systems, for example, systems considered in [20,25,26]. In [27], the authors conjectured that for the case d = 3, there exists a lower bound of dc electrical conductivity ∏iσii > 1. But it was soon found that this bound can be violated by a special coupling between the linear axion fields and the U (1) gauge field [25,26]. The structure of this paper is organized as follows. In section 2, we present our main results by writing

  17. Electrical Conductivity Calculations from the Purgatorio Code

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, S B; Isaacs, W A; Sterne, P A; Wilson, B G; Sonnad, V; Young, D A

    2006-01-09

    The Purgatorio code [Wilson et al., JQSRT 99, 658-679 (2006)] is a new implementation of the Inferno model describing a spherically symmetric average atom embedded in a uniform plasma. Bound and continuum electrons are treated using a fully relativistic quantum mechanical description, giving the electron-thermal contribution to the equation of state (EOS). The free-electron density of states can also be used to calculate scattering cross sections for electron transport. Using the extended Ziman formulation, electrical conductivities are then obtained by convolving these transport cross sections with externally-imposed ion-ion structure factors.

  18. Modeling liver electrical conductivity during hypertonic injection.

    Science.gov (United States)

    Castellví, Quim; Sánchez-Velázquez, Patricia; Moll, Xavier; Berjano, Enrique; Andaluz, Anna; Burdío, Fernando; Bijnens, Bart; Ivorra, Antoni

    2017-05-30

    Metastases in the liver frequently grow as scattered tumor nodules that neither can be removed by surgical resection nor focally ablated. Previously, we have proposed a novel technique based on irreversible electroporation that may be able to simultaneously treat all nodules in the liver while sparing healthy tissue. The proposed technique requires increasing the electrical conductivity of healthy liver by injecting a hypersaline solution through the portal vein. Aiming to assess the capability of increasing the global conductivity of the liver by means of hypersaline fluids, here, it is presented a mathematical model that estimates the NaCl distribution within the liver and the resulting conductivity change. The model fuses well-established compartmental pharmacokinetic models of the organ with saline injection models used for resuscitation treatments, and it considers changes in sinusoidal blood viscosity because of the hypertonicity of the solution. Here, it is also described a pilot experimental study in pigs in which different volumes of NaCl 20% (from 100 to 200 mL) were injected through the portal vein at different flow rates (from 53 to 171 mL/minute). The in vivo conductivity results fit those obtained by the model, both quantitatively and qualitatively, being able to predict the maximum conductivity with a 14.6% average relative error. The maximum conductivity value was 0.44 second/m, which corresponds to increasing 4 times the mean basal conductivity (0.11 second/m). The results suggest that the presented model is well suited for predicting on liver conductivity changes during hypertonic saline injection. Copyright © 2017 John Wiley & Sons, Ltd.

  19. Magnetic resonance electrical impedance tomography for measuring electrical conductivity during electroporation.

    Science.gov (United States)

    Kranjc, M; Bajd, F; Serša, I; Miklavčič, D

    2014-06-01

    The electroporation effect on tissue can be assessed by measurement of electrical properties of the tissue undergoing electroporation. The most prominent techniques for measuring electrical properties of electroporated tissues have been voltage-current measurement of applied pulses and electrical impedance tomography (EIT). However, the electrical conductivity of tissue assessed by means of voltage-current measurement was lacking in information on tissue heterogeneity, while EIT requires numerous additional electrodes and produces results with low spatial resolution and high noise. Magnetic resonance EIT (MREIT) is similar to EIT, as it is also used for reconstruction of conductivity images, though voltage and current measurements are not limited to the boundaries in MREIT, hence it yields conductivity images with better spatial resolution. The aim of this study was to investigate and demonstrate the feasibility of the MREIT technique for assessment of conductivity images of tissues undergoing electroporation. Two objects were investigated: agar phantoms and ex vivo liver tissue. As expected, no significant change of electrical conductivity was detected in agar phantoms exposed to pulses of all used amplitudes, while a considerable increase of conductivity was measured in liver tissue exposed to pulses of different amplitudes.

  20. Nonlinear Conductivity of a Holographic Superconductor Under Constant Electric Field

    CERN Document Server

    Zeng, Hua-Bi; Fan, Zheyong; Chen, Chiang-Mei

    2016-01-01

    The dynamics of a two-dimensional superconductor under a constant electric field $E$ is studied by using the gauge/gravity correspondence. The pair breaking current induced by $E$ first increases to a peak value and then decreases to a constant value at late time, where the superconducting gap goes to zero, corresponding to a normal conducting phase. The peak value of the current is found to increase linearly with respect to the electric field. Moreover, the nonlinear conductivity, defined as an average of the conductivity in the superconducting phase, scales as $\\sim E^{-2/3}$ for large $E$ when the system is close to the critical temperature, which agrees with predictions from solving the time dependent Ginzburg-Landau equation.

  1. Advances in Electrical Current Collection

    Science.gov (United States)

    1982-01-01

    temperature rise at sliding electrical contacts ....................... 29 E. Rabinowicz (Cambridge, MA, U.S.A.) Thermal stability in graphite contacts...I. IR. McNab, J. L. Johnson, P. Reichner, J. J. Schreurs, P. K. Lee and E. Rabinowicz for * helpful discussions, the Westinghouse Research and...to express their appreciation to I. R, McNab, J. L. Johnson, P. Reichner, J. J. Schreurs, P. K. Lee and E. Rabinowicz forIhelpful discussions, the

  2. Realistic Electric Field Mapping of Anisotropic Muscle During Electrical Stimulation Using a Combination of Water Diffusion Tensor and Electrical Conductivity.

    Science.gov (United States)

    Choi, Bup Kyung; Oh, Tong In; Sajib, Saurav Zk; Kim, Jin Woong; Kim, Hyung Joong; Kwon, Oh In; Woo, Eung Je

    2017-04-01

    To realistically map the electric fields of biological tissues using a diffusion tensor magnetic resonance electrical impedance tomography (DT-MREIT) method to estimate tissue response during electrical stimulation. Imaging experiments were performed using chunks of bovine muscle. Two silver wire electrodes were positioned inside the muscle tissue for electrical stimulation. Electric pulses were applied with a 100-V amplitude and 100-μs width using a voltage stimulator. During electrical stimulation, we collected DT-MREIT data from a 3T magnetic resonance imaging scanner. We adopted the projected current density method to calculate the electric field. Based on the relation between the water diffusion tensor and the conductivity tensor, we computed the position-dependent scale factor using the measured magnetic flux density data. Then, a final conductivity tensor map was reconstructed using the multiplication of the water diffusion tensor and the scale factor. The current density images from DT-MREIT data represent the internal current flows that exist not only in the electrodes but also in surrounding regions. The reconstructed electric filed map from our anisotropic conductivity tensor with the projected current density shows coverage that is more than 2 times as wide, and higher signals in both the electrodes and surrounding tissues, than the previous isotropic method owing to the consideration of tissue anisotropy. An electric field map obtained by an anisotropic reconstruction method showed different patterns from the results of the previous isotropic reconstruction method. Since accurate electric field mapping is important to correctly estimate the coverage of the electrical treatment, future studies should include more rigorous validations of the new method through in vivo and in situ experiments.

  3. Realistic Electric Field Mapping of Anisotropic Muscle During Electrical Stimulation Using a Combination of Water Diffusion Tensor and Electrical Conductivity

    Science.gov (United States)

    2017-01-01

    Purpose To realistically map the electric fields of biological tissues using a diffusion tensor magnetic resonance electrical impedance tomography (DT-MREIT) method to estimate tissue response during electrical stimulation. Methods Imaging experiments were performed using chunks of bovine muscle. Two silver wire electrodes were positioned inside the muscle tissue for electrical stimulation. Electric pulses were applied with a 100-V amplitude and 100-μs width using a voltage stimulator. During electrical stimulation, we collected DT-MREIT data from a 3T magnetic resonance imaging scanner. We adopted the projected current density method to calculate the electric field. Based on the relation between the water diffusion tensor and the conductivity tensor, we computed the position-dependent scale factor using the measured magnetic flux density data. Then, a final conductivity tensor map was reconstructed using the multiplication of the water diffusion tensor and the scale factor. Results The current density images from DT-MREIT data represent the internal current flows that exist not only in the electrodes but also in surrounding regions. The reconstructed electric filed map from our anisotropic conductivity tensor with the projected current density shows coverage that is more than 2 times as wide, and higher signals in both the electrodes and surrounding tissues, than the previous isotropic method owing to the consideration of tissue anisotropy. Conclusions An electric field map obtained by an anisotropic reconstruction method showed different patterns from the results of the previous isotropic reconstruction method. Since accurate electric field mapping is important to correctly estimate the coverage of the electrical treatment, future studies should include more rigorous validations of the new method through in vivo and in situ experiments. PMID:28446015

  4. Electrically conductive biodegradable polymer composite for nerve regeneration: electricity-stimulated neurite outgrowth and axon regeneration.

    Science.gov (United States)

    Zhang, Ze; Rouabhia, Mahmoud; Wang, Zhaoxu; Roberge, Christophe; Shi, Guixin; Roche, Phillippe; Li, Jiangming; Dao, Lê H

    2007-01-01

    Normal and electrically stimulated PC12 cell cultures and the implantation of nerve guidance channels were performed to evaluate newly developed electrically conductive biodegradable polymer composites. Polypyrrole (PPy) doped by butane sulfonic acid showed a significantly higher number of viable cells compared with PPy doped by polystyrenesulfonate after a 6-day culture. The PC12 cells were left to proliferate for 6 days, and the PPy-coated membranes, showing less initial cell adherence, recorded the same proliferation rate as did the noncoated membranes. Direct current electricity at various intensities was applied to the PC12 cell-cultured conductive membranes. After 7 days, the greatest number of neurites appeared on the membranes with a current intensity approximating 1.7-8.4 microA/cm. Nerve guidance channels made of conductive biodegradable composite were implanted into rats to replace 8 mm of sciatic nerve. The implants were harvested after 2 months and analyzed with immunohistochemistry and transmission electron microscopy. The regenerated nerve tissue displayed myelinated axons and Schwann cells that were similar to those in the native nerve. Electrical stimulation applied through the electrically conductive biodegradable polymers therefore enhanced neurite outgrowth in a current-dependent fashion. The conductive polymers also supported sciatic nerve regeneration in rats.

  5. Anisotropy of electrical conductivity in dry olivine

    Energy Technology Data Exchange (ETDEWEB)

    Du Frane, W L; Roberts, J J; Toffelmier, D A; Tyburczy, J A

    2005-04-13

    [1] The electrical conductivity ({sigma}) was measured for a single crystal of San Carlos olivine (Fo{sub 89.1}) for all three principal orientations over oxygen fugacities 10{sup -7} < fO{sub 2} < 10{sup 1} Pa at 1100, 1200, and 1300 C. Fe-doped Pt electrodes were used in conjunction with a conservative range of fO{sub 2}, T, and time to reduce Fe loss resulting in data that is {approx}0.15 log units higher in conductivity than previous studies. At 1200 C and fO{sub 2} = 10{sup -1} Pa, {sigma}{sub [100]} = 10{sup -2.27} S/m, {sigma}{sub [010]} = 10{sup -2.49} S/m, {sigma}{sub [001]} = 10{sup -2.40} S/m. The dependences of {sigma} on T and fO{sub 2} have been simultaneously modeled with undifferentiated mixed conduction of small polarons and Mg vacancies to obtain steady-state fO{sub 2}-independent activation energies: Ea{sub [100]} = 0.32 eV, Ea{sub [010]} = 0.56 eV, Ea{sub [001]} = 0.71 eV. A single crystal of dry olivine would provide a maximum of {approx}10{sup 0.4} S/m azimuthal {sigma} contrast for T < 1500 C. The anisotropic results are combined to create an isotropic model with Ea = 0.53 eV.

  6. Computational thermodynamics in electric current metallurgy

    DEFF Research Database (Denmark)

    Bhowmik, Arghya; Qin, R.S.

    2015-01-01

    A priori derivation for the extra free energy caused by the passing electric current in metal is presented. The analytical expression and its discrete format in support of the numerical calculation of thermodynamics in electric current metallurgy have been developed. This enables the calculation...... of electric current distribution, current induced temperature distribution and free energy sequence of various phase transitions in multiphase materials. The work is particularly suitable for the study of magnetic materials that contain various magnetic phases. The latter has not been considered in literature....... The method has been validated against the analytical solution of current distribution and experimental observation of microstructure evolution. It provides a basis for the design, prediction and implementation of the electric current metallurgy. The applicability of the theory is discussed in the derivations....

  7. Sintering Behavior and Effect of Silver Nanowires on the Electrical Conductivity of Electrically Conductive Adhesives.

    Science.gov (United States)

    Xie, H; Xiong, N N; Wang, Y H; Zhao, Y Z; Li, J Z

    2016-01-01

    In this paper, two kinds of silver nanowires with a 160 nm average diameter ranging from 30 to 90 µm length and a 450 nm average diameter up to 100 µm length were successfully synthesized by a polyol process with FeCl3 and Na₂S as reaction inhibitor, respectively. The experimental results indicate that the morphologies and sintering behaviors of both of silver nanowires are impacted by glutaric acid and sintering temperature. The isotropically conductive adhesives (ICAs) filled with micro-sized silver flakes and silver nanowires as hybrid fillers were fabricated and the electrical properties were investigated based on the fraction of the silver nanowires of the total of silver fillers and the curing temperature, etc. The in situ monitoring the variation in electrical resistance of the ICAs explores that silver nanowires have influence on the curing behavior of the ICAs. Silver nanowires synthesized with Na2S as reaction inhibitor and treated with glutaric acid can significantly improve the electrical conductivity of the ICAs in the case of the low loading of silver fillers in the appropriate proportion range of the weight ratio of micro-sized silver flakes and silver nanowires, primarily as a result of connecting effect. When the loading of silver fillers in the ICAs is high, the electrical conductivity is also enhanced slightly in the case of the proper fraction of silver nanowires of the total of silver fillers. The effect of the curing temperature on the electrical conductivity relates to the fraction of silver nanowires and the total loading of silver fillers. The electrical conductivity of the ICAs filled with micro-sized silver flakes and silver nanowires synthesized with FeCl₃ as reaction inhibitor is greatly damaged, indicating that the size of silver nanowires also is one of main factor to impact the electrical conductivity of the ICAs doped with silver nanowires. The electrical property of the ICAs filled with micro-sized silver flakes and silver

  8. Form Invariant Sommerfeld Electrical Conductivity in Generalised d Dimensions

    Institute of Scientific and Technical Information of China (English)

    Muktish Acharyya

    2011-01-01

    The Sommerfeld electrical conductivity is calculated in d dimensions following Boltzmann kinetic approach. At T =0, the mathematical form of the electrical conductivity is found to remain invariant in any generalised spatial (d) dimensions.

  9. Comparison of Systems for Levitation Heating of Electrically Conductive Bodies

    Directory of Open Access Journals (Sweden)

    Bohus Ulrych

    2004-01-01

    Full Text Available Levitation heating of nonmagnetic electrically conductive bodies can be realized in various systems consisting of one of more inductors. The paper deals with compassion of the resultant. Lorentz lifts force acting on such a body (cylinder, sphere and velocity of its heating for different shapes of coils and parameters of the field currents (amplitudes, frequency. The tack is solved in quasi-coupled formulation. Theoretical considerations are supplemented with an illustrative example whose results are discussed.

  10. Succession of cable bacteria and electric currents in marine sediment

    OpenAIRE

    Schauer, Regina; Risgaard-Petersen, Nils; Kjeldsen, Kasper U.; Tataru Bjerg, Jesper J; B Jørgensen, Bo; Schramm, Andreas; Nielsen, Lars Peter

    2014-01-01

    Filamentous Desulfobulbaceae have been reported to conduct electrons over centimetre-long distances, thereby coupling oxygen reduction at the surface of marine sediment to sulphide oxidation in sub-surface layers. To understand how these ‘cable bacteria' establish and sustain electric conductivity, we followed a population for 53 days after exposing sulphidic sediment with initially no detectable filaments to oxygen. After 10 days, cable bacteria and electric currents were established through...

  11. II. Model building: an electrical theory of control of growth and development in animals, prompted by studies of exogenous magnetic field effects (paper I), and evidence of DNA current conduction, in vitro.

    Science.gov (United States)

    Elson, Edward

    2009-01-01

    A theory of control of cellular proliferation and differentiation in the early development of metazoan systems, postulating a system of electrical controls "parallel" to the processes of molecular biochemistry, is presented. It is argued that the processes of molecular biochemistry alone cannot explain how a developing organism defies a stochastic universe. The demonstration of current flow (charge transfer) along the long axis of DNA through the base-pairs (the "pi-way) in vitro raises the question of whether nature may employ such current flows for biological purposes. Such currents might be too small to be accessible to direct measurement in vivo but conduction has been measured in vitro, and the methods might well be extended to living systems. This has not been done because there is no reasonable model which could stimulate experimentation. We suggest several related, but detachable or independent, models for the biological utility of charge transfer, whose scope admittedly outruns current concepts of thinking about organization, growth, and development in eukaryotic, metazoan systems. The ideas are related to explanations proposed to explain the effects demonstrated on tumors and normal tissues described in Article I (this issue). Microscopic and mesoscopic potential fields and currents are well known at sub-cellular, cellular, and organ systems levels. Not only are such phenomena associated with internal cellular membranes in bioenergetics and information flow, but remarkable long-range fields over tissue interfaces and organs appear to play a role in embryonic development (Nuccitelli, 1992 ). The origin of the fields remains unclear and is the subject of active investigation. We are proposing that similar processes could play a vital role at a "sub-microscopic level," at the level of the chromosomes themselves, and could play a role in organizing and directing fundamental processes of growth and development, in parallel with the more discernible fields and

  12. Single-photon heat conduction in electrical circuits

    CERN Document Server

    Jones, P J; Tan, K Y; Möttönen, M

    2011-01-01

    We study photonic heat conduction between two resistors coupled weakly to a single superconducting microwave cavity. At low enough temperature, the dominating part of the heat exchanged between the resistors is transmitted by single-photon excitations of the fundamental mode of the cavity. This manifestation of single-photon heat conduction should be experimentally observable with the current state of the art. Our scheme can possibly be utilized in remote interference-free temperature control of electric components and environment engineering for superconducting qubits coupled to cavities.

  13. Electric currents couple spatially separated biogeochemical processes in marine sediment

    DEFF Research Database (Denmark)

    Nielsen, Lars Peter; Risgaard-Petersen, Nils; Fossing, Henrik;

    2010-01-01

    be coupled by electric currents in nature. Here we provide evidence that electric currents running through defaunated sediment couple oxygen consumption at the sediment surface to oxidation of hydrogen sulphide and organic carbon deep within the sediment. Altering the oxygen concentration in the sea water...... in the sediment was driven by electrons conducted from the anoxic zone. A distinct pH peak in the oxic zone could be explained by electrochemical oxygen reduction, but not by any conventional sets of aerobic sediment processes. We suggest that the electric current was conducted by bacterial nanowires combined...... with pyrite, soluble electron shuttles and outer-membrane cytochromes. Electrical communication between distant chemical and biological processes in nature adds a new dimension to our understanding of biogeochemistry and microbial ecology....

  14. Numerical Model for Conduction-Cooled Current Lead Heat Loads

    CERN Document Server

    White, M J; Brueck, H D; 10.1063/1.4706965

    2012-01-01

    Current leads are utilized to deliver electrical power from a room temperature junction mounted on the vacuum vessel to a superconducting magnet located within the vacuum space of a cryostat. There are many types of current leads used at laboratories throughout the world, however, conduction-cooled current leads are often chosen for their simplicity and reliability. Conduction-cooled leads have the advantage of using common materials, have no superconducting/normal state transition, and have no boil-off vapor to collect. The XFEL (X-Ray Free Electron Laser) magnets are operated at 2 K, which makes vapor-cooled current leads impractical due to the sub-atmospheric bath pressure. This paper presents a numerical model for conduction-cooled current lead heat loads. This model takes into account varying material and fluid thermal properties, varying thicknesses along the length of the lead, heat transfer in the circumferential and longitudinal directions, electrical power dissipation, and the effect of thermal inte...

  15. Equivalent Resistance in Pulse Electric Current Sintering

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The sintering resistance for conductive TiB2 and non-conductive Al2O3 as well as empty die during pulse current sintering were investigated in this paper.Equivalent resistances were measured by current and valtage during sintering the conductive and non-conductive materials in the same conditions.It is found that the current paths for conductive are different from those for non-conductive materials.For non-conductive materials,sintering resistances are influenced by powder sizes and heating rates,which indicates that pulse current has some interaction with non-conductive powders.For conductive TiB2,sintering resistances are influenced by heating rates and ball-milling time,which indicates the effect of powders activated by spark.

  16. Temporal stability of electrical conductivity in a sandy soil

    Science.gov (United States)

    Pedrera-Parrilla, Aura; Brevik, Eric C.; Giráldez, Juan V.; Vanderlinden, Karl

    2016-07-01

    Understanding of soil spatial variability is needed to delimit areas for precision agriculture. Electromagnetic induction sensors which measure the soil apparent electrical conductivity reflect soil spatial variability. The objectives of this work were to see if a temporally stable component could be found in electrical conductivity, and to see if temporal stability information acquired from several electrical conductivity surveys could be used to better interpret the results of concurrent surveys of electrical conductivity and soil water content. The experimental work was performed in a commercial rainfed olive grove of 6.7 ha in the `La Manga' catchment in SW Spain. Several soil surveys provided gravimetric soil water content and electrical conductivity data. Soil electrical conductivity values were used to spatially delimit three areas in the grove, based on the first principal component, which represented the time-stable dominant spatial electrical conductivity pattern and explained 86% of the total electrical conductivity variance. Significant differences in clay, stone and soil water contents were detected between the three areas. Relationships between electrical conductivity and soil water content were modelled with an exponential model. Parameters from the model showed a strong effect of the first principal component on the relationship between soil water content and electrical conductivity. Overall temporal stability of electrical conductivity reflects soil properties and manifests itself in spatial patterns of soil water content.

  17. Electrical conductivity in two mixed-valence liquids.

    Science.gov (United States)

    Yao, Wenzhi; Kelley, Steven P; Rogers, Robin D; Vaid, Thomas P

    2015-06-01

    Two different room-temperature liquid systems were investigated, both of which conduct a DC electrical current without decomposition or net chemical transformation. DC electrical conductivity is possible in both cases because of the presence of two different oxidation states of a redox-active species. One system is a 1 : 1 molar mixture of n-butylferrocene (BuFc) and its cation bis(trifluoromethane)sulfonimide salt, [BuFc(+)][NTf2(-)], while the other is a 1 : 1 molar mixture of TEMPO and its cation bis(trifluoromethane)sulfonimide salt, [TEMPO(+)][NTf2(-)]. The TEMPO-[TEMPO(+)][NTf2(-)] system is notable in that it is an electrically conducting liquid in which the conductivity originates from an organic molecule in two different oxidation states, with no metals present. Single-crystal X-ray diffraction of [TEMPO(+)][NTf2(-)] revealed a complex structure with structurally different cation-anion interactions for cis- and trans [NTf2(-)] conformers. The electron transfer self-exchange rate constant for BuFc/BuFc(+) in CD3CN was determined by (1)H NMR spectroscopy to be 5.4 × 10(6) M(-1) s(-1). The rate constant allowed calculation of an estimated electrical conductivity of 7.6 × 10(-5)Ω(-1) cm(-1) for BuFc-[BuFc(+)][NTf2(-)], twice the measured value of 3.8 × 10(-5)Ω(-1) cm(-1). Similarly, a previously reported self-exchange rate constant for TEMPO/TEMPO(+) in CH3CN led to an estimated conductivity of 1.3 × 10(-4)Ω(-1) cm(-1) for TEMPO-[TEMPO(+)][NTf2(-)], a factor of about 3 higher than the measured value of 4.3 × 10(-5)Ω(-1) cm(-1).

  18. Electric current arising from unpolarized polyvinyl formal

    Indian Academy of Sciences (India)

    P K Khare; P L Jain; R K Pandey

    2000-10-01

    An appreciable electric current is observed in a system consisting of a polyvinyl formal (PVF) film in a sandwich configuration, in the temperature range 30–110°C. The maximum value of the current during first heating is found to be of the order of 10–10 A and its thermograms exhibit one transition (i.e. current peak) at around 60°C. The position of the current peak in thermal spectrum shifts with the heating rate. A temperature dependence of the open circuit voltage is also observed. The activation energy of the process responsible for the current is determined. The magnitude of the current is more in the case of dissimilar electrode systems. It is proposed that the electric current arising from unpolarized metal–polymer–metal system is a water activated phenomenon, which is influenced by the transitional changes of the polymer.

  19. Electrochemical relaxation at electrically conducting polymers

    Science.gov (United States)

    Nateghi, M. R.; zarandi, M. B.

    2008-08-01

    In this study, slow relaxation (SR) associated with the electroreduction of polyaniline (PAn) films during polarization to high cathodic potentials was investigated by cyclic voltammetry technique. Anodic voltammetric currents were used as experimental variable to indicate the relaxation occurring in PAn films deposited electrochemically on the Pt electrode surface. The dependence of SR on polymer film thickness, waiting potential, and mobility of the doped anion was investigated. Percolation threshold potential for heteropolyanion doped PAn was estimated to be between 150 and 200 mV depending on polymer thickness on the electrode surface. A new model of the conducting to insulating conversion is described by the percolation theory and mobility gap changes during the process.

  20. Electrochemical relaxation at electrically conducting polymers

    Energy Technology Data Exchange (ETDEWEB)

    Nateghi, M R [Department of Chemistry, Islamic Azad University, Yazd-Branch, Yazd (Iran, Islamic Republic of); Zarandi, M B [Department of physics, Yazd University, Yazd (Iran, Islamic Republic of)

    2008-08-15

    In this study, slow relaxation (SR) associated with the electroreduction of polyaniline (PAn) films during polarization to high cathodic potentials was investigated by cyclic voltammetry technique. Anodic voltammetric currents were used as experimental variable to indicate the relaxation occurring in PAn films deposited electrochemically on the Pt electrode surface. The dependence of SR on polymer film thickness, waiting potential, and mobility of the doped anion was investigated. Percolation threshold potential for heteropolyanion doped PAn was estimated to be between 150 and 200 mV depending on polymer thickness on the electrode surface. A new model of the conducting to insulating conversion is described by the percolation theory and mobility gap changes during the process.

  1. Modeling the interaction of electric current and tissue: importance of accounting for time varying electric properties.

    Science.gov (United States)

    Evans, Daniel J; Manwaring, Mark L

    2007-01-01

    Time varying computer models of the interaction of electric current and tissue are very valuable in helping to understand the complexity of the human body and biological tissue. The electrical properties of tissue, permittivity and conductivity, are vital to accurately modeling the interaction of the human tissue with electric current. Past models have represented the electric properties of the tissue as constant or temperature dependent. This paper presents time dependent electric properties that change as a result of tissue damage, temperature, blood flow, blood vessels, and tissue property. Six models are compared to emphasize the importance of accounting for these different tissue properties in the computer model. In particular, incorporating the time varying nature of the electric properties of human tissue into the model leads to a significant increase in tissue damage. An important feature of the model is the feedback loop created between the electric properties, tissue damage, and temperature.

  2. Characteristics of alternating current hopping conductivity in DNA sequences

    Institute of Scientific and Technical Information of China (English)

    Ma Song-Shan; Xu Hui; Wang Huan-You; Guo Rui

    2009-01-01

    This paper presents a model to describe alternating current (AC) conductivity of DNA sequences,in which DNA is considered as a one-dimensional (1D) disordered system,and electrons transport via hopping between localized states.It finds that AC conductivity in DNA sequences increases as the frequency of the external electric field rises,and it takes the form of σac(ω)~ω2 ln2(1/ω).Also AC conductivity of DNA sequences increases with the increase of temperature,this phenomenon presents characteristics of weak temperature-dependence.Meanwhile,the AC conductivity in an off diagonally correlated case is much larger than that in the uncorrelated case of the Anderson limit in low temperatures,which indicates that the off-diagonal correlations in DNA sequences have a great effect on the AC conductivity,while at high temperature the off-diagonal correlations no longer play a vital role in electric transport. In addition,the proportion of nucleotide pairs p also plays an important role in AC electron transport of DNA sequences.For p<0.5,the conductivity of DNA sequence decreases with the increase of p,while for p > 0.5,the conductivity increases with the increase of p.

  3. Electrical conductivity of nanostructured and C60-modified aluminum

    NARCIS (Netherlands)

    Zameshin, A.; Popov, M.; Medvedev, V.V.; Perfilov, S.; Lomakin, R.; Buga, S.; Denisov, V.; Kirichenko, A.; Skryleva, E.; Tatyanin, E.; Aksenenkov, V.; Blank, V.

    2012-01-01

    In this paper, we study the electrical conductivity of nanostructured C60-modified aluminum, and the possibility of optimizing its electrical and mechanical properties. The model proposed allows estimating the electrical conductivity of the material at low surface filling factor. A number of samples

  4. Electrical conductivity of nanostructured and C-60-modified aluminum

    NARCIS (Netherlands)

    Zameshin, A.; Popov, M.; Medvedev, V.; Perfilov, S.; Lomakin, R.; Buga, S.; Denisov, V.; Kirichenko, A.; Skryleva, E.; Tatyanin, E.; Aksenenkov, V.; Blank, V.

    2012-01-01

    In this paper, we study the electrical conductivity of nanostructured C-60-modified aluminum, and the possibility of optimizing its electrical and mechanical properties. The model proposed allows estimating the electrical conductivity of the material at low surface filling factor. A number of sample

  5. System and method for determining velocity of electrically conductive fluid

    Science.gov (United States)

    Polzin, Kurt A. (Inventor); Korman, Valentin (Inventor); Markusic, Thomas E. (Inventor); Stanojev, Boris Johann (Inventor)

    2008-01-01

    A flowing electrically-conductive fluid is controlled between an upstream and downstream location thereof to insure that a convection timescale of the flowing fluid is less than a thermal diffusion timescale of the flowing fluid. First and second nodes of a current-carrying circuit are coupled to the fluid at the upstream location. A current pulse is applied to the current-carrying circuit so that the current pulse travels through the flowing fluid to thereby generate a thermal feature therein at the upstream location. The thermal feature is convected to the downstream location where it is monitored to detect a peak associated with the thermal feature so-convected. The velocity of the fluid flow is determined using a time-of-flight analysis.

  6. Redox Conductivity of Current-Producing Mixed Species Biofilms

    Science.gov (United States)

    Fan, Yanzhen; Liu, Hong

    2016-01-01

    While most biological materials are insulating in nature, efficient extracellular electron transfer is a critical property of biofilms associated with microbial electrochemical systems and several microorganisms are capable of establishing conductive aggregates and biofilms. Though construction of these conductive microbial networks is an intriguing and important phenomenon in both natural and engineered systems, few studies have been published related to conductive biofilms/aggregates and their conduction mechanisms, especially in mixed-species environments. In the present study, current-producing mixed species biofilms exhibited high conductivity across non-conductive gaps. Biofilm growth observed on the inactive electrode contributed to overall power outputs, suggesting that an electrical connection was established throughout the biofilm assembly. Electrochemical gating analysis of the biofilms over a range of potentials (-600–200 mV, vs. Ag/AgCl) resulted in a peak-manner response with maximum conductance of 3437 ± 271 μS at a gate potential of -360 mV. Following removal of the electron donor (acetate), a 96.6% decrease in peak conductivity was observed. Differential responses observed in the absence of an electron donor and over varying potentials suggest a redox driven conductivity mechanism in mixed-species biofilms. These results demonstrated significant differences in biofilm development and conductivity compared to previous studies using pure cultures. PMID:27159497

  7. Succession of cable bacteria and electric currents in marine sediment

    DEFF Research Database (Denmark)

    Schauer, Regina; Risgaard-Petersen, Nils; Kjeldsen, Kasper Urup

    2014-01-01

    ][mu]m, with a general increase over time and depth, and yet they shared 16S rRNA sequence identity of >98%. Comparison of the increase in biovolume and electric current density suggested high cellular growth efficiency. While the vertical expansion of filaments continued over time and reached 30[thinsp]mm, the electric......Filamentous Desulfobulbaceae have been reported to conduct electrons over centimetre-long distances, thereby coupling oxygen reduction at the surface of marine sediment to sulphide oxidation in sub-surface layers. To understand how these /`cable bacteria/' establish and sustain electric...... conductivity, we followed a population for 53 days after exposing sulphidic sediment with initially no detectable filaments to oxygen. After 10 days, cable bacteria and electric currents were established throughout the top 15[thinsp]mm of the sediment, and after 21 days the filament density peaked with a total...

  8. Succession of cable bacteria and electric currents in marine sediment

    DEFF Research Database (Denmark)

    Schauer, Regina; Risgaard-Petersen, Nils; Kjeldsen, Kasper Urup

    2014-01-01

    Filamentous Desulfobulbaceae have been reported to conduct electrons over centimetre-long distances, thereby coupling oxygen reduction at the surface of marine sediment to sulphide oxidation in sub-surface layers. To understand how these /`cable bacteria/' establish and sustain electric...... conductivity, we followed a population for 53 days after exposing sulphidic sediment with initially no detectable filaments to oxygen. After 10 days, cable bacteria and electric currents were established throughout the top 15[thinsp]mm of the sediment, and after 21 days the filament density peaked with a total......][mu]m, with a general increase over time and depth, and yet they shared 16S rRNA sequence identity of >98%. Comparison of the increase in biovolume and electric current density suggested high cellular growth efficiency. While the vertical expansion of filaments continued over time and reached 30[thinsp]mm, the electric...

  9. Electrical conduction in SnO{sub 2} varistors

    Energy Technology Data Exchange (ETDEWEB)

    Glot, A.B., E-mail: alexglot@mixteco.utm.m [Universidad Tehnologica de la Mixteca, Huajuapan de Leon, Oaxaca 69000 (Mexico); Gaponov, A.V. [Dniepropetrovsk National University, Dniepropetrovsk 49010 (Ukraine); Sandoval-Garcia, A.P. [Universidad Tehnologica de la Mixteca, Huajuapan de Leon, Oaxaca 69000 (Mexico)

    2010-01-15

    This paper outlines some details of the conduction mechanism in SnO{sub 2}-based ceramic varistors. It is shown that the activation energy of electrical conduction E{sub s}igma (the barrier height phi) in SnO{sub 2} varistor is weakly decreased at low electric field E and strongly decreased at high fields. The strong decrease in E{sub s}igma(E) at high fields is conditioning factor of highly nonlinear current-voltage characteristic. The conduction process is thermally activated not only at low (E{sub s}igmaapprox =0.8-1eV) but also at high electric fields (E{sub s}igmaapprox =0.3-0.5eV). The 'negative capacitance' phenomenon at high fields in highly nonlinear SnO{sub 2} varistor is observed. The relation between the high nonlinearity, the high slope of E{sub s}igma(E) dependence at high fields, the 'negative capacitance' and possible generation of the minority carriers (holes) at high fields is discussed.

  10. Electrical Conductivity of Alkaline-reduced Graphene Oxide

    Institute of Scientific and Technical Information of China (English)

    WANG Huan; TIAN Hong-wei; WANG Xin-wei; QIAO Liang; WANG Shu-min; WANG Xing-li; ZHENG Wei-tao; LIU Yi-chun

    2011-01-01

    A green route using a very simple and straightforward ultrasonic process under alkaline conditions,rather than a general chemical reduction process using hydrazine,was utilized to obtain the hydrophilic reduced graphene oxide(RGO) sheets,via removing oxygen functional groups from graphene oxide(GO) and repairing the aromatic structure.It is found that the conductivity of the obtained RGO could be tuned by changing pH value in alkaline solution,and the current-voltage(Ⅰ-Ⅴ) curves of both GO and RGO are nonlinear and slightly asymmetric.Under the same applied voltage,the current of RGO is much larger than that of GO,indicating a pronounced increase in the electrical conductivity of RGO,compared to that of GO.

  11. Piezoelectric resonators with mechanical damping and resistance in current conduction

    Institute of Scientific and Technical Information of China (English)

    Yook-Kong; YONG; Mihir; S; PATEL

    2007-01-01

    A novel design method for high Q piezoelectric resonators was presented and proposed using the 3-D equations of linear piezoelectricity with quasi-electrostatic approximation which include losses attributed to mechanical damping in solid and resistance in current conduction. There is currently no finite element software for estimating the Q of a resonator without apriori assumptions of the resonator impedance or damping. There is a necessity for better and more realistic modeling of resonators and filters due to miniaturization and the rapid advances in frequency ranges in telecommunication.We presented new three-dimensional finite element models of quartz and barium titanate resonators with mechanical damping and resistance in current conduction. Lee, Liu and Ballato's 3-D equations of linear piezoelectricity with quasi-electro- static approximation which include losses attributed to mechanical damping in solid and resistance in current conduction were formulated in a weak form and implemented in COMSOL. The resulting finite element model could predict the Q and other electrical parameters for any piezoelectric resonator without apriori assumptions of damping or resistance. Forced and free vibration analyses were performed and the results for the Q and other electrical parameters were obtained. Comparisons of the Q and other electrical parameters obtained from the free vibration analysis with their corresponding values from the forced vibration analysis were found to be in excellent agreement. Hence, the frequency spectra obtained from the free vibration analysis could be used for designing high Q resonators. Results for quartz thickness shear AT-cut and SC-cut resonators and thickness stretch poled barium titanate resonators were presented. An unexpected benefit of the model was the prediction of resonator Q with energy losses via the mounting supports.

  12. Electrical Conduction of Some Fe3S3 Ring Compounds

    Institute of Scientific and Technical Information of China (English)

    WANG Jian; LIU Ping; YOU Gang

    2003-01-01

    @@ M3S3 cluster six-membered ring compounds are very interesting compounds liking aromatic benzene, and Cu, Pd, B and so on can also form M3S3 cluster besides Fe. [1,2] In recent years electrical conduction of some metal com plexes has been studied. [3,4] The study of electrical conduction through DNA molecules has illustrated that DNA is a semiconductor, but its principle of electrical conduction has not been revealed. [5,6] Electrical conduction of artificial synthesized Fe-S cluster compounds has not been reported. We hope to infer the function on electrical conduction of metal active centers of iron-sulfur proteins through study of electrical conduction of Fe3S3 ring compounds, paving the way for the discovery of new advanced biological functional materials.

  13. Electric currents couple spatially separated biogeochemical processes in marine sediment

    DEFF Research Database (Denmark)

    Nielsen, Lars Peter; Risgaard-Petersen, Nils; Fossing, Henrik

    2010-01-01

    Some bacteria are capable of extracellular electron transfer, thereby enabling them to use electron acceptors and donors without direct cell contact 1, 2, 3, 4 . Beyond the micrometre scale, however, no firm evidence has previously existed that spatially segregated biogeochemical processes can...... be coupled by electric currents in nature. Here we provide evidence that electric currents running through defaunated sediment couple oxygen consumption at the sediment surface to oxidation of hydrogen sulphide and organic carbon deep within the sediment. Altering the oxygen concentration in the sea water...... in the sediment was driven by electrons conducted from the anoxic zone. A distinct pH peak in the oxic zone could be explained by electrochemical oxygen reduction, but not by any conventional sets of aerobic sediment processes. We suggest that the electric current was conducted by bacterial nanowires combined...

  14. Electrical conduction in solid materials physicochemical bases and possible applications

    CERN Document Server

    Suchet, J P

    2013-01-01

    Electrical Conduction in Solid Materials (Physicochemical Bases and Possible Applications) investigates the physicochemical bases and possible applications of electrical conduction in solid materials, with emphasis on conductors, semiconductors, and insulators. Topics range from the interatomic bonds of conductors to the effective atomic charge in conventional semiconductors and magnetic transitions in switching semiconductors. Comprised of 10 chapters, this volume begins with a description of electrical conduction in conductors and semiconductors, metals and alloys, as well as interatomic bon

  15. Method of forming an electrically conductive cellulose composite

    Science.gov (United States)

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2011-11-22

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  16. Dynamic Conduction in 2-Dimensional Conductor: Magneto-Conductivity Tensor under Rapid Oscillatory Electric Field

    Directory of Open Access Journals (Sweden)

    Pijus Kanti Samanta

    2016-06-01

    Full Text Available The conduction mechanism of metals under rapidly oscillating electric field and static perpendicular magnetic field has been investigated within the regime ω≫1/τ. The conventional Lorentz force equation has been used to calculate the conduction current density within the metal. It was found that the conductivity of the metal is anisotropic in nature. We also found that the diagonal elements of the conductivity tensor are equal while the off-diagonal elements are equal in magnitude but opposite in sign. Further it is also found that the diagonal components are imaginary and inversely varies with ω while the off-diagonal components are inversely proportional to ω2.

  17. Anisotropic ion diffusivity in intervertebral disc: an electrical conductivity approach.

    Science.gov (United States)

    Jackson, Alicia; Yao, Hai; Brown, Mark D; Yong Gu, Wei

    2006-11-15

    Investigation of the transport behavior of ions in intervertebral disc using an electrical conductivity method. To determine the electrical conductivity and ion diffusivity of nucleus pulposus and anulus fibrosus in 3 major directions (axial, circumferential, and radial). Knowledge of diffusivity of small molecules is important for understanding nutrition supply in intervertebral disc and disc degeneration. However, little is known on the anisotropic behaviors of ion diffusivity and of electrical conductivity in intervertebral disc. Electrical conductivity measurement was performed on 24 axial, circumferential, and radial anulus fibrosus specimens and 24 axial nucleus pulposus specimens from bovine coccygeal discs. The diffusivity of Na and Cl were estimated by the analysis of conductivity data. The electrical conductivity (mean +/- standard deviation; n = 24) of the bovine anulus fibrosus was 4.70 +/- 1.08 mS/cm in the axial, 2.86 +/- 0.83 mS/cm in the radial, and 4.38 +/- 1.25 mS/cm in the circumferential direction. For nucleus pulposus, the electrical conductivity (mean +/- standard deviation; n = 24) was 8.95 +/- 0.89 mS/cm. The mean value for nucleus pulposus was significantly higher than that of anulus fibrosus (t test, P conductivity in the radial direction was significantly lower than in axial or circumferential directions. Similar trends were found for both Na and Cl diffusivities. Both electrical conductivity and ion diffusivity were highly sensitive to water content. Electrical conductivity and ion diffusivity of anulus fibrosus are anisotropic.

  18. Recent Improvements in High-Frequency Eddy Current Conductivity Spectroscopy

    Science.gov (United States)

    Abu-Nabah, Bassam A.; Nagy, Peter B.

    2008-02-01

    Due to its frequency-dependent penetration depth, eddy current measurements are capable of mapping near-surface residual stress profiles based on the so-called piezoresistivity effect, i.e., the stress-dependence of electric conductivity. To capture the peak compressive residual stress in moderately shot-peened (Almen 4-8A) nickel-base superalloys, the eddy current inspection frequency has to go as high as 50-80 MHz. Recently, we have reported the development of a new high-frequency eddy current conductivity measuring system that offers an extended inspection frequency range up to 80 MHz. Unfortunately, spurious self- and stray-capacitance effects render the complex coil impedance variation with lift-off more nonlinear as the frequency increases, which makes it difficult to achieve accurate apparent eddy current conductivity (AECC) measurements with the standard four-point linear interpolation method beyond 25 MHz. In this paper, we will demonstrate that reducing the coil size reduces its sensitivity to capacitive lift-off variations, which is just the opposite of the better known inductive lift-off effect. Although reducing the coil size also reduces its absolute electric impedance and relative sensitivity to conductivity variations, a smaller coil still yields better overall performance for residual stress assessment. In addition, we will demonstrate the benefits of a semi-quadratic interpolation scheme that, together with the reduced lift-off sensitivity of the smaller probe coil, minimizes and in some cases completely eliminates the sensitivity of AECC measurements to lift-off uncertainties. These modifications allow us to do much more robust measurements up to as high as 80-100 MHz with the required high relative accuracy of +/-0.1%.

  19. Wet method for measuring starch gelatinization temperature using electrical conductivity.

    Science.gov (United States)

    Morales-Sanchez, E; Figueroa, J D C; Gaytan-Martínez, M

    2009-09-01

    The objective of the present study was to develop a method for obtaining the gelatinization temperature of starches by using electrical conductivity. Native starches from corn, rice, potato, and wheat were prepared with different proportions of water and heated from room temperature to 90 degrees C, in a device especially designed for monitoring the electrical conductivity as a function of temperature. The results showed a linear trend of the electrical conductivity with the temperature until it reaches the onset gelatinization temperature. After that point, the electrical conductivity presented an increment or decrement depending on the water content in the sample and it was related to starch swelling and gelatinization phenomena. At the end gelatinization temperature, the conductivity becomes stable and linear, indicating that there are no more changes of phase. The starch gelatinization parameter, which was evaluated in the 4 types of starches using the electrical conductivity, was compared with those obtained by using differential scanning calorimeter (DSC). The onset temperature at which the electrical conductivity increased or decreased was found to be similar to that obtained by DSC. Also, the final temperature at which the electrical conductivity returned to linearity matched the end gelatinization temperature of the DSC. Further, a wet method for measuring the onset, peak, and end gelatinization temperatures as a function of temperature using the electrical conductivity curves is presented for a starch-water suspension.

  20. Current injection electrodes for electrical impedance tomography.

    Science.gov (United States)

    Armstrong, S; Jennings, D

    2004-08-01

    Current conveyors have been identified as a possible component within the current injection electrodes of an electrical impedance tomography system, where accurate current generation or precise measurement of the current injected is required. Several circuit configurations have been investigated through simulation to determine the most suitable to meet the specifications of the EIT system. A bipolar (floating source) circuit configuration employing the use of current conveyors has been designed, which achieves greater than 12 mA output current without saturation, over an accepted body impedance range. Simulations were performed over frequencies in excess of 1 MHz, and the output phase shift was less than 0.15 degrees up to 250 kHz, and 0.6 degrees up to 1 MHz.

  1. Ambient effects on the electrical conductivity of carbon nanotubes

    DEFF Research Database (Denmark)

    Roch, Aljoscha; Greifzu, Moritz; Roch Talens, Esther

    2015-01-01

    We show that the electrical conductivity of single walled carbon nanotubes (SWCNT) networks is affected by oxygen and air humidity under ambient conditions by more than a magnitude. Later, we intentionally modified the electrical conductivity by functionalization with iodine and investigated...

  2. Electrical conductivity measurements of nanofluids and development of new correlations.

    Science.gov (United States)

    Konakanchi, Hanumantharao; Vajjha, Ravikanth; Misra, Debasmita; Das, Debendra

    2011-08-01

    In this study the electrical conductivity of aluminum oxide (Al2O3), silicon dioxide (SiO2) and zinc oxide (ZnO) nanoparticles dispersed in propylene glycol and water mixture were measured in the temperature range of 0 degrees C to 90 degrees C. The volumetric concentration of nanoparticles in these fluids ranged from 0 to 10% for different nanofluids. The particle sizes considered were from 20 nm to 70 nm. The electrical conductivity measuring apparatus and the measurement procedure were validated by measuring the electrical conductivity of a calibration fluid, whose properties are known accurately. The measured electrical conductivity values agreed within +/- 1% with the published data reported by the manufacturer. Following the validation, the electrical conductivities of different nanofluids were measured. The measurements showed that electrical conductivity of nanofluids increased with an increase in temperature and also with an increase in particle volumetric concentration. For the same nanofluid at a fixed volumetric concentration, the electrical conductivity was found to be higher for smaller particle sizes. From the experimental data, empirical models were developed for three nanofluids to express the electrical conductivity as functions of temperature, volumetric concentration and the size of the nanoparticles.

  3. Lunar electrical conductivity, permeability and temperature from Apollo magnetometer experiments

    Science.gov (United States)

    Dyal, P.; Parkin, C. W.; Daily, W. D.

    1977-01-01

    Magnetometers were deployed at four Apollo sites on the moon to measure remanent and induced lunar magnetic fields. Measurements from this network of instruments were used to calculate the electrical conductivity, temperature, magnetic permeability, and iron abundance of the lunar interior. The measured lunar remanent fields range from 3 gammas minimum at the Apollo 15 site to 327 gammas maximum at the Apollo 16 site. Simultaneous magnetic field and solar plasma pressure measurements show that the remanent fields at the Apollo 12 and 16 sites interact with, and are compressed by, the solar wind. Remanent fields at Apollo 12 and Apollo 16 are increased 16 gammas and 32 gammas, respectively, by a solar plasma bulk pressure increase of 1.5 X 10 to the -7th power dynes/sq cm. Global lunar fields due to eddy currents, induced in the lunar interior by magnetic transients, were analyzed to calculate an electrical conductivity profile for the moon. From nightside magnetometer data in the solar wind it was found that deeper than 170 km into the moon the conductivity rises from .0003 mhos/m to .10 mhos/m at 100 km depth. Recent analysis of data obtained in the geomagnetic tail, in regions free of complicating plasma effects, yields results consistent with nightside values.

  4. Electrical synapses and synchrony: the role of intrinsic currents.

    Science.gov (United States)

    Pfeuty, Benjamin; Mato, Germán; Golomb, David; Hansel, David

    2003-07-16

    Electrical synapses are ubiquitous in the mammalian CNS. Particularly in the neocortex, electrical synapses have been shown to connect low-threshold spiking (LTS) as well as fast spiking (FS) interneurons. Experiments have highlighted the roles of electrical synapses in the dynamics of neuronal networks. Here we investigate theoretically how intrinsic cell properties affect the synchronization of neurons interacting by electrical synapses. Numerical simulations of a network of conductance-based neurons randomly connected with electrical synapses show that potassium currents promote synchrony, whereas the persistent sodium current impedes it. Furthermore, synchrony varies with the firing rate in qualitatively different ways depending on the intrinsic currents. We also study analytically a network of quadratic integrate-and-fire neurons. We relate the stability of the asynchronous state of this network to the phase-response function (PRF), which characterizes the effect of small perturbations on the firing timing of the neurons. In particular, we show that the greater the skew of the PRF toward the first half of the period, the more stable the asynchronous state. Combining our simulations with our analytical results, we establish general rules to predict the dynamic state of large networks of neurons coupled with electrical synapses. Our work provides a natural explanation for surprising experimental observations that blocking electrical synapses may increase the synchrony of neuronal activity. It also suggests different synchronization properties for LTS and FS cells. Finally, we propose to further test our predictions in experiments using dynamic clamp techniques.

  5. Electrical conductivity measurements on disk-shaped samples.

    Science.gov (United States)

    de Boor, J; Zabrocki, K; Frohring, J; Müller, E

    2014-07-01

    We have developed a sample holder design that allows for electrical conductivity measurements on a disk-shaped sample. The sample holder design is based on and compatible with popular measurement systems that are currently restricted to bar-shaped samples. The geometrical correction factors which account for the adjusted measurement configuration were calculated using finite element modeling for a broad range of sample and measurement geometries. We also show that the modeling results can be approximated by a simple analytical fit function with excellent accuracy. The proposed sample holder design is compatible with a concurrent measurement of the Seebeck coefficient. The chosen sample geometry is furthermore compatible with a thermal conductivity measurement using a laser flash apparatus. A complete thermoelectric characterization without cutting the sample is thus possible.

  6. Electrical conduction in graphene and nanotubes

    CERN Document Server

    Fujita, Shigeji

    2013-01-01

    Written in a self-contained manner, this textbook allows both advanced students and practicing applied physicists and engineers to learn the relevant aspects from the bottom up. All logical steps are laid out without omitting steps.The book covers electrical transport properties in carbon based materials by dealing with statistical mechanics of carbon nanotubes and graphene ? presenting many fresh and sometimes provoking views. Both second quantization and superconductivity are covered and discussed thoroughly. An extensive list of references is given in the end of each chapter, while derivati

  7. Mantle electrical conductivity profile of Niger delta region

    Indian Academy of Sciences (India)

    Daniel N Obiora; Francisca N Okeke; K Yumoto; Stan O Agha

    2014-06-01

    The mantle electrical conductivity-depth profile of the Niger delta region in Nigeria has been determined using solar quiet day ionospheric current (Sq).The magnetometer data obtained in 2010 from geomagnetic stations installed in Lagos by magnetic dataset (MAGDAS) in 2008 and data from magnetometers installed in some parts of Niger delta by Center for Basic Space Science, University of Nigeria, Nsukka, were employed in this study. Gauss spherical harmonic analysis (SHA) method was used to separate the internal and external field contributions to Sq current system. The result depicted that the conductivity profile rose steadily from about 0.032 S/m at a depth of 89 km to 0.041 S/m at 100 km and 0.09 S/m at 221 km. This high conductivity region agreed with the global seismic low velocity region, the asthenosphere. The conductivity profile continued increasing downward until it got to 0.157 S/m at a depth of about 373 km (close to the base of upper mantle), 0.201 S/m at 784 km and reached 0.243 S/m at a depth of 1179 km at the lower mantle.

  8. TASER conducted electrical weapons and implanted pacemakers and defibrillators.

    Science.gov (United States)

    Vanga, Subba R; Bommana, Sudharani; Kroll, Mark W; Swerdlow, Charles; Lakkireddy, Dhanunjaya

    2009-01-01

    Conducted electrical weapons (CEW) have generated controversy in recent years regarding their effect on heart rhythm and on their suspected interaction with implanted devices such as the pacemakers and ICDs (implantable cardioverter defibrillators). We review the current evidence available on device interactions and pre-sent a new case series of 6 patients. We used the available case reports and animal studies on TASER or CEW related publications in PubMed. Oversensing of TASER CEW discharges may cause noise reversion pacing in pacemakers and inappropriate detection of VF in ICDs. The nominal 5-second discharge is sufficiently short that neither clinically significant inhibition of bradycardia pacing nor inappropriate ICD shocks have been reported. Current evidence indicates that CEW discharges do not have adverse effects on pacemakers and ICDs.

  9. Vortex Lines and Monopoles in Electrically Conducting Plasmas

    Institute of Scientific and Technical Information of China (English)

    WANG Ji-Biao; REN Ji-Rong; LI Ran

    2009-01-01

    Based on the C-mapping topological current theory and the decomposition of gauge potential theory, the vortex lines and the monopoles in electrically conducting plasmas are studied.It is pointed out that these two topological structures respectively inhere in two-dimensional and three-dimensional topological currents, which can be derived from the same topological term , and both these topological structures are characterized by the φ-mapping topological numbers-Hopf indices and Brouwer degrees.Furthermore, the spatial bifurcation of vortex lines and the generation and annihilation of monopoles are also discussed.At last, we point out that the Hopf invariant is a proper topological invariant to describe the knotted solitons.

  10. Spin-dependent electrical conduction in a pentacene Schottky diode explored by electrically detected magnetic resonance

    Science.gov (United States)

    Fukuda, Kunito; Asakawa, Naoki

    2017-02-01

    Reported is the observation of dark spin-dependent electrical conduction in a Schottky barrier diode with pentacene (PSBD) using electrically detected magnetic resonance at room temperature. It is suggested that spin-dependent conduction exists in pentacene thin films, which is explored by examining the anisotropic linewidth of the EDMR signal and current density-voltage (J-V) measurements. The EDMR spectrum can be decomposed to Gaussian and Lorentzian components. The dependency of the two signals on the applied voltage was consistent with the current density-voltage (J-V) of the PSBD rather than that of the electron-only device of Al/pentacene/Al, indicating that the spin-dependent conduction is due to bipolaron formation associated with hole polaronic hopping processes. The applied-voltage dependence of the ratio of intensity of the Gaussian line to the Lorentzian may infer that increasing current density should make conducting paths more dispersive, thereby resulting in an increased fraction of the Gaussian line due to the higher dispersive g-factor.

  11. Electrical conductivity measurements from the STRATCOM 8 experiment

    Science.gov (United States)

    Mitchell, J. D.; Ho, K. J.; Half, L. C.; Croskey, C. L.; Olsen, R. O.

    1978-01-01

    A blunt probe experiment for measuring electrical conductivity was flown with the STRATCOM 8 instrument package. Data were obtained by the instrument throughout the entire measurement period. A preliminary analysis of the data indicates an enhancement in conductivity associated with the krypton discharge ionization lamp, particularly in negative conductivity. The conductivity values and their altitude dependence are consistent with previous balloon and rocket results.

  12. Electrically conductive lines on cellulose nanopaper for flexible electrical devices

    Science.gov (United States)

    Hsieh, Ming-Chun; Kim, Changjae; Nogi, Masaya; Suganuma, Katsuaki

    2013-09-01

    Highly conductive circuits are fabricated on nanopapers composed of densely packed 15-60 nm wide cellulose nanofibers. Conductive materials are deposited on the nanopaper and mechanically sieved through the densely packed nanofiber networks. As a result, their conductivity is enhanced to the level of bulk silver and LED lights are successfully illuminated via these metallic conductive lines on the nanopaper. Under the same deposition conditions, traditional papers consisting of micro-sized pulp fibers produced very low conductivity lines with non-uniform boundaries because of their larger pore structures. These results indicate that advanced, lightweight and highly flexible devices can be realized on cellulose nanopaper using continuous deposition processes. Continuous deposition on nanopaper is a promising approach for a simple roll-to-roll manufacturing process.

  13. Structural and Electrical Study of Conducting Polymers

    Science.gov (United States)

    Shaktawat, Vinodini; Dixit, Manasvi; Saxena, N. S.; Sharma, Kananbala

    2010-06-01

    Pure and oxalic acid doped conducting polymers (polyaniline and polypyrrole) were chemically synthesized using ammonium persulfate (APS) as an oxidant. These samples were characterized through Scanning Electron Microscopy (SEM), which provides information about the surface topography of polymers. I-V characteristics have been recorded at room temperature as well as in the temperature range from 313 K to 463 K. So obtained characteristic curves were found to be linear. Temperature dependence of conductivity suggests a semiconducting nature in polyaniline samples with increase in temperature, whereas oxalic acid doped polypyrrole sample suggests a transition from semiconducting to metallic nature with the increase of temperature.

  14. Bentonite electrical conductivity: a model based on series–parallel transport

    KAUST Repository

    Lima, Ana T.

    2010-01-30

    Bentonite has significant applications nowadays, among them as landfill liners, in concrete industry as a repairing material, and as drilling mud in oil well construction. The application of an electric field to such perimeters is under wide discussion, and subject of many studies. However, to understand the behaviour of such an expansive and plastic material under the influence of an electric field, the perception of its electrical properties is essential. This work serves to compare existing data of such electrical behaviour with new laboratorial results. Electrical conductivity is a pertinent parameter since it indicates how much a material is prone to conduct electricity. In the current study, total conductivity of a compacted porous medium was established to be dependent upon density of the bentonite plug. Therefore, surface conductivity was addressed and a series-parallel transport model used to quantify/predict the total conductivity of the system. © The Author(s) 2010.

  15. (ECG). Part 2:Abnormalities of electrical conduction

    African Journals Online (AJOL)

    Ann Burgess

    noticeable effect at all (asymptomatic) through to sudden death ... This may result in failure of the heart rate to rise adequately with exercise (chronotropic ... there are varying degrees of AV block and these result in different patterns of ... Mobitz Type 2 second degree AV block; on this occasion only 1 P wave in 3 is conducted ...

  16. Variable Anisotropic Brain Electrical Conductivities in Epileptogenic Foci

    Science.gov (United States)

    Mandelkern, M.; Bui, D.; Salamon, N.; Vinters, H. V.; Mathern, G. W.

    2010-01-01

    Source localization models assume brain electrical conductivities are isotropic at about 0.33 S/m. These assumptions have not been confirmed ex vivo in humans. This study determined bidirectional electrical conductivities from pediatric epilepsy surgery patients. Electrical conductivities perpendicular and parallel to the pial surface of neocortex and subcortical white matter (n = 15) were measured using the 4-electrode technique and compared with clinical variables. Mean (±SD) electrical conductivities were 0.10 ± 0.01 S/m, and varied by 243% from patient to patient. Perpendicular and parallel conductivities differed by 45%, and the larger values were perpendicular to the pial surface in 47% and parallel in 40% of patients. A perpendicular principal axis was associated with normal, while isotropy and parallel principal axes were linked with epileptogenic lesions by MRI. Electrical conductivities were decreased in patients with cortical dysplasia compared with non-dysplasia etiologies. The electrical conductivity values of freshly excised human brain tissues were approximately 30% of assumed values, varied by over 200% from patient to patient, and had erratic anisotropic and isotropic shapes if the MRI showed a lesion. Understanding brain electrical conductivity and ways to non-invasively measure them are probably necessary to enhance the ability to localize EEG sources from epilepsy surgery patients. PMID:20440549

  17. Ion current rectification, limiting and overlimiting conductances in nanopores.

    Directory of Open Access Journals (Sweden)

    Liesbeth van Oeffelen

    Full Text Available Previous reports on Poisson-Nernst-Planck (PNP simulations of solid-state nanopores have focused on steady state behaviour under simplified boundary conditions. These are Neumann boundary conditions for the voltage at the pore walls, and in some cases also Donnan equilibrium boundary conditions for concentrations and voltages at both entrances of the nanopore. In this paper, we report time-dependent and steady state PNP simulations under less restrictive boundary conditions, including Neumann boundary conditions applied throughout the membrane relatively far away from the nanopore. We simulated ion currents through cylindrical and conical nanopores with several surface charge configurations, studying the spatial and temporal dependence of the currents contributed by each ion species. This revealed that, due to slow co-diffusion of oppositely charged ions, steady state is generally not reached in simulations or in practice. Furthermore, it is shown that ion concentration polarization is responsible for the observed limiting conductances and ion current rectification in nanopores with asymmetric surface charges or shapes. Hence, after more than a decade of collective research attempting to understand the nature of ion current rectification in solid-state nanopores, a relatively intuitive model is retrieved. Moreover, we measured and simulated current-voltage characteristics of rectifying silicon nitride nanopores presenting overlimiting conductances. The similarity between measurement and simulation shows that overlimiting conductances can result from the increased conductance of the electric double-layer at the membrane surface at the depletion side due to voltage-induced polarization charges. The MATLAB source code of the simulation software is available via the website http://micr.vub.ac.be.

  18. Ion current rectification, limiting and overlimiting conductances in nanopores.

    Science.gov (United States)

    van Oeffelen, Liesbeth; Van Roy, Willem; Idrissi, Hosni; Charlier, Daniel; Lagae, Liesbet; Borghs, Gustaaf

    2015-01-01

    Previous reports on Poisson-Nernst-Planck (PNP) simulations of solid-state nanopores have focused on steady state behaviour under simplified boundary conditions. These are Neumann boundary conditions for the voltage at the pore walls, and in some cases also Donnan equilibrium boundary conditions for concentrations and voltages at both entrances of the nanopore. In this paper, we report time-dependent and steady state PNP simulations under less restrictive boundary conditions, including Neumann boundary conditions applied throughout the membrane relatively far away from the nanopore. We simulated ion currents through cylindrical and conical nanopores with several surface charge configurations, studying the spatial and temporal dependence of the currents contributed by each ion species. This revealed that, due to slow co-diffusion of oppositely charged ions, steady state is generally not reached in simulations or in practice. Furthermore, it is shown that ion concentration polarization is responsible for the observed limiting conductances and ion current rectification in nanopores with asymmetric surface charges or shapes. Hence, after more than a decade of collective research attempting to understand the nature of ion current rectification in solid-state nanopores, a relatively intuitive model is retrieved. Moreover, we measured and simulated current-voltage characteristics of rectifying silicon nitride nanopores presenting overlimiting conductances. The similarity between measurement and simulation shows that overlimiting conductances can result from the increased conductance of the electric double-layer at the membrane surface at the depletion side due to voltage-induced polarization charges. The MATLAB source code of the simulation software is available via the website http://micr.vub.ac.be.

  19. Russian electricity market. Current state and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Abdurafikov, R.

    2009-06-15

    The Russian electricity market is currently in transition. The restructuring of the sector has been completed and former public vertically integrated monopolies have been unbundled and partly privatised. The government retained control in all the network companies, the system operator, nuclear generation, and hydro generation. The state retains control also via owner-ship in several TGCs and WGCs in the strategic regions of Moscow and Saint-Petersburg via the state owned gas monopoly Gazprom. The liberalization takes place within two price zones, Europe and Siberia, where more than 90%, 913 TWh in 2007, of Russian electricity consumption takes place. In the rest of Russia, e.g. the Far East and isolated areas like Kaliningrad, electricity is supplied at regulated rates. Only a minor part of electricity in the price zones is currently traded at free prices. The share of electricity traded at free market prices will increase according to the liberalization schedule, reaching ca 90%, all except households, by 2011. Wholesale electricity market bids are aggregated in a detailed power system model of the Russian power grid, taking into account the physical locations of the facilities. The resulting 7700+ nodal market prices, scattered across the 7 time zones of the Russian market area, capture costs of congestion and load losses in the grid. The price level of electricity seems to be rather low at a glance - about 21 euro and 15 euro per MWh in Europe and Siberia respectively. On the other hand, wholesale market buyers have to pay for capacity availability, on average around 3000 euro/MW monthly. With greater share of electricity traded at free prices there will be an increased need to hedge price risks. For this reason a financial market is planned. There are also plans for support schemes for renewable generation and to limit environmental pollution as well as ancillary services markets. Some areas do not experience a likewise opening of the competition in Russia, for

  20. Electrical safety of conducted electrical weapons relative to requirements of relevant electrical standards.

    Science.gov (United States)

    Panescu, Dorin; Nerheim, Max; Kroll, Mark

    2013-01-01

    TASER(®) conducted electrical weapons (CEW) deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. TASER X26, X26P, and X2 are among CEW models most frequently deployed by law enforcement agencies. The X2 CEW uses two cartridge bays while the X26 and X26P CEWs have only one. The TASER X26P CEW electronic output circuit design is equivalent to that of any one of the two TASER X2 outputs. The goal of this paper was to analyze the nominal electrical outputs of TASER X26, X26P, and X2 CEWs in reference to provisions of several international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. The outputs of two TASER X26 and two TASER X2 CEWs were measured and confirmed against manufacturer and other published specifications. The TASER X26, X26P, and X2 CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2 and IEC 60601-1. Prior reports on similar topics were reviewed as well. Our measurements and analyses confirmed that the nominal electrical outputs of TASER X26, X26P and X2 CEWs lie within safety bounds specified by relevant requirements of the above standards.

  1. Assembly for electrical conductivity measurements in the piston cylinder device

    Science.gov (United States)

    Watson, Heather Christine [Dublin, CA; Roberts, Jeffrey James [Livermore, CA

    2012-06-05

    An assembly apparatus for measurement of electrical conductivity or other properties of a sample in a piston cylinder device wherein pressure and heat are applied to the sample by the piston cylinder device. The assembly apparatus includes a body, a first electrode in the body, the first electrode operatively connected to the sample, a first electrical conductor connected to the first electrode, a washer constructed of a hard conducting material, the washer surrounding the first electrical conductor in the body, a second electrode in the body, the second electrode operatively connected to the sample, and a second electrical conductor connected to the second electrode.

  2. Synthesis of novel electrically conducting polymers: Potential conducting Langmuir-Blodgett films and conducting polymers on defined surfaces

    Science.gov (United States)

    Zimmer, Hans

    1993-01-01

    Based on previous results involving thiophene derived electrically conducting polymers in which it was shown that thiophene, 3-substituted thiophenes, furans, and certain oligomers of these compounds showed electrical conductivity after polymerization. The conductivity was in the order of up to 500 S/cm. In addition, these polymers showed conductivity without being doped and most of all they were practically inert toward ambient conditions. They even could be used in aqueous media. With these findings as a guide, a number of 3-long-chain-substituted thiophenes and 1-substituted-3-long-chain substituted pyrrols were synthesized as monomers for potential polymeric electrically conducting Langmuir-Blodgett films.

  3. Electrically and Thermally Conducting Nanocomposites for Electronic Applications

    Directory of Open Access Journals (Sweden)

    Daryl Santos

    2010-02-01

    Full Text Available Nanocomposites made up of polymer matrices and carbon nanotubes are a class of advanced materials with great application potential in electronics packaging. Nanocomposites with carbon nanotubes as fillers have been designed with the aim of exploiting the high thermal, electrical and mechanical properties characteristic of carbon nanotubes. Heat dissipation in electronic devices requires interface materials with high thermal conductivity. Here, current developments and challenges in the application of nanotubes as fillers in polymer matrices are explored. The blending together of nanotubes and polymers result in what are known as nanocomposites. Among the most pressing current issues related to nanocomposite fabrication are (i dispersion of carbon nanotubes in the polymer host, (ii carbon nanotube-polymer interaction and the nature of the interface, and (iii alignment of carbon nanotubes in a polymer matrix. These issues are believed to be directly related to the electrical and thermal performance of nanocomposites. The recent progress in the fabrication of nanocomposites with carbon nanotubes as fillers and their potential application in electronics packaging as thermal interface materials is also reported.

  4. Modeling of heat evolution in silicate building materials with electrically conductive admixtures

    Science.gov (United States)

    Fiala, Lukáš; Maděra, Jiří; Vejmelková, Eva; Černý, Robert

    2016-12-01

    Silicate building materials are electrically non-conductive, in general. However, a sufficient amount of electrically conductive admixtures can significantly increase their electrical conductivity. Consequently, new practical applications of such materials are available. Materials with enhanced electrical properties can be used as self-sensing sensors monitoring evolution of cracks, electromagnetic shields or cores of deicing systems. This paper deals with the modeling of heat evolution in silicate building materials by the action of passing electric current. Due to the conducting paths formed in the material's matrix by adding a sufficient amount of electrically conductive admixture and applying electric voltage on the installed electrodes, electric current is passing through the material. Thanks to the electric current, Joule heat is successively evolved. As it is crucial to evaluate theoretically the amount of evolved heat in order to assess the effectiveness of such a system, a model describing the Joule heat evolution is proposed and a modeling example based on finite-element method is introduced.

  5. Percolation of open grain boundaries and change in electrical conductivity

    Science.gov (United States)

    Watanabe, T.

    2016-12-01

    Numerical experiments were conducted on the percolation of open grain boundaries to study the percolation threshold and evolution of connectivity. Open grain boundaries are a major component of pores in crustal materials. Electrical conductivity and permeability are highly sensitive to the connectivity of open brain boundaries. The length and size of the largest cluster was surveyed in a 3D array of cubic grains for various fractions of open grain boundary. For sufficiently large size of array, the percolation threshold was found to be 0.25. If more than 25% of grain boundaries are open, an interconnected network of open grain boundaries is formed. If the aggregate is saturated with brine, the electrical conduction can occur through open grain boundaries. The connectivity of open grain boundaries steeply increases to 1 around the threshold. The electrical conductivity is also expected to increase steeply. The crack density parameter for the percolation threshold is estimated to be 0.1. The large change in electrical conductivity for a small change in crack density parameter is thus expected around crack density parameter of 0.1. Simultaneous measurements on elastic wave velocity and electrical conductivity in a brine saturated granitic rock (Watanabe and Higuchi, 2015) showed a steep change in electrical conductivity around the crack density parameter of 0.1. XCT images show that open grain boundaries are the dominant pores in the sample. The steep change in conductivity must thus be related to the percolation of open grain boundaries.

  6. Electric conductivity of polymer films filled with magnetic nanoparticles

    Science.gov (United States)

    Rumyantsev, B. M.; Bibikov, S. B.; Bychkova, A. V.; Leontiev, V. G.; Berendyaev, V. I.; Sorokina, O. N.; Kovarskii, A. L.

    2016-12-01

    The conductivity of polymer composites with magnetic nanoparticles (MNP) containing magnetite and other MNP (Ni, Cu-Ni) in the layers and planar cells with Al electrodes is studied. For soluble polymers (polyvinylpyrrolidone and polyvinyl alcohol) containing 1-10 wt % of magnetite MNP, a substantial effect of MNP on surface conductivity is detected over a wide range (from 10-10 to 10-3 Ω-1). It is shown that the addition of magnetite MNP not only results in a considerable change in cell conductivity, but also leads to its partially irreversible variation (by an order of magnitude or more) via minor modifications of the experimental conditions (temperature, electric field). For high-resistance samples with low probabilities of conducting chain formation, temperature current peaks are observed upon moderate heating (up to 350 K). These peaks are similar to the maxima observed upon polymer electret thermodischarges when the charges are captured by the deep centers associated with separate MNP or MNP aggregates. The type and position of the maxima are determined by the characteristics of the polymer matrix. For polyvinylpyrrolidone composites, the maxima are observed some time after heating (the echo effect). With composites based on solventborne polymers (polyalkanesterimides, soluble polyimide) and Ni, Cu-Ni MNP, no change in film conductivity measured electrophotographically is observed, due to the formation of a dielectric coating formed by polymer macromolecules adsorbed on the MNP surface. An explanation based on the possible formation of magnetic aggregates of magnetite MNP and conducting chains is proposed. Magnetic aggregation IPM is proposed as one way of controlling cell conductivity.

  7. Effect of Ligament Morphology on Electrical Conductivity of Porous Silver

    Science.gov (United States)

    Zuruzi, Abu Samah; Mazulianawati, Majid Siti

    2016-12-01

    We investigate the effect of ligament morphology on electrical conductivity of open cell porous silver (Ag). Porous Ag was formed when silver nanoparticles in an organic phase were annealed at 150°C for durations ranging from 1 to 5 min. Electrical conductivity of porous Ag was about 20% of bulk value after 5 min annealing. Porous Ag was modeled as a collection of Kelvin cell (truncated octahedrons) structures comprised of conjoined conical ligaments and spherical vertices. An analytical expression for electrical conductivity was obtained. Electrical conductivity normal to hexagonal faces of the unit cell was computed. Our model indicates contribution of grain boundary to electrical resistance increases significantly after the first minute of annealing and plateaus thereafter. Using experimental electrical conductivity data as an input, the model suggests that the ratio, n, of surfaces of one half of a conjoined cone ligament is between 0.7 and 1.0. Average deviation from experimentally determined relative electrical conductivity, Δ σ r, was minimal when n = 0.9.

  8. The Influence of Preparation Conditions on the Electrical Conductivity of Poly N-Methyl-pyrrole Films

    DEFF Research Database (Denmark)

    Vidanapathirana, K.; Careem, M.A.; Skaarup, Steen

    1999-01-01

    on the electrical conductivity has been investigated. The conductivity was measured by the in situ method using a specially prepared two-band microelectrode. The current density used during the polymerization has a considerable influence on the conductivity, as earlier observed for polypyrrole in non...

  9. Measurement of Electrical Conductivity for a Biomass Fire

    Directory of Open Access Journals (Sweden)

    Mal Heron

    2008-08-01

    Full Text Available A controlled fire burner was constructed where various natural vegetation species could be used as fuel. The burner was equipped with thermocouples to measure fuel surface temperature and used as a cavity for microwaves with a laboratory quality 2- port vector network analyzer to determine electrical conductivity from S-parameters. Electrical conductivity for vegetation material flames is important for numerical prediction of flashover in high voltage power transmission faults research. Vegetation fires that burn under high voltage transmission lines reduce flashover voltage by increasing air electrical conductivity and temperature. Analyzer determined electrical conductivity ranged from 0.0058 - 0.0079 mho/m for a fire with a maximum temperature of 1240 K.

  10. Electrical conductivity of rocks at high pressures and temperatures

    Science.gov (United States)

    Parkhomenko, E. I.; Bondarenko, A. T.

    1986-01-01

    The results of studies of the electrical conductivity in the most widely distributed types of igneous rocks, at temperatures of up to 1200 C, at atmospheric pressure, and also at temperatures of up to 700 C and at pressures of up to 20,000 kg/sq cm are described. The figures of electrical conductivity, of activaation energy and of the preexponential coefficient are presented and the dependence of these parameters on the petrochemical parameters of the rocks are reviewed. The possible electrical conductivities for the depository, granite and basalt layers of the Earth's crust and of the upper mantle are presented, as well as the electrical conductivity distribution to the depth of 200 to 240 km for different geological structures.

  11. Improved phenol adsorption from aqueous solution using electrically conducting adsorbents

    Energy Technology Data Exchange (ETDEWEB)

    Asghar, Hafiz Muhammad Anwaar; Hussain, Syed Nadir [The University of Manchester, Manchester (United Kingdom); Sattar, Hamed [University of Leeds, Leeds (United Kingdom); Brown, Nigel Willis [Daresbury Innovation Centre, Cheshire (United Kingdom); Roberts, Edward Pelham Lindfield [University of Calgary, Calgary (Canada)

    2014-05-15

    The electrically conducting and partially porous graphite based adsorbent (called Nyex{sup TM} 2000) was tested for its adsorption capacity and electrochemical regeneration ability for the removal of phenol from aqueous solution. Nyex{sup TM} 2000 was tested in comparison with Nyex{sup TM} 1000, which is currently being used for a number of industrial waste water treatment applications. Nyex{sup TM} 1000 exhibited small adsorption capacity of 0.1 mg g{sup -1} for phenol because of having small specific surface area of 1 m{sup 2} g{sup -1}. In contrast, Nyex{sup TM} 2000 with specific surface area of 17 m{sup 2} g{sup -1} delivered an adsorption capacity of 0.8 mg g{sup -1}, which was eight-fold higher than that of Nyex{sup TM} 1000. Nyex{sup TM} 2000 was successfully electrochemically regenerated by passing a current of 0.5 A, charge passed of 31 C g{sup -1} for a treatment time of 45 minutes. These electrochemical parameters were comparable to Nyex{sup TM} 1000 for which a current of 0.5 A, charge passed of 5 C g{sup -1} for a treatment time of 20 minutes were applied for complete oxidation of adsorbed phenol. The comparatively high charge density was found to be required for Nyex{sup TM} 2000, which is justified with its higher adsorption capacity. The FTIR results validated the mineralization of adsorbed phenol into CO{sub 2} and H{sub 2}O except the formation of few by-products, which were in traces when compared with the concentration of phenol removed from aqueous solution. The electrical energy as required for electrochemical oxidation of phenol adsorbed onto Nyex{sup TM} 1000 and 2000 was found to be 214 and 196 J mg{sup -1}, respectively. The comparatively low energy requirement for electrochemical oxidation using Nyex{sup TM} 2000 is consistent with its higher bed electrical conductivity, which is twice that of Nyex{sup TM} 1000.

  12. Influential Factors on Deicing Performance of Electrically Conductive Concrete Pavement

    Institute of Scientific and Technical Information of China (English)

    TANG Zuquan; QIAN Jueshi; LI Zhuoqiu; WU Chuanming

    2006-01-01

    The deicing experiment of carbon fiber reinforced electrically conductive concrete (CFRC) slab was conducted in laboratory at first, then the deicing process of CFRC pavement was analyzed by means of finite element method (FEM). At last, based on the energy conservation law and the computing results of finite element method, the influential factors including the setting of electric heating layer, environmental temperature, the thickness of ice, material parameters, and deicing power on deicing performance and energy consumption were discussed.

  13. Succession of cable bacteria and electric currents in marine sediment.

    Science.gov (United States)

    Schauer, Regina; Risgaard-Petersen, Nils; Kjeldsen, Kasper U; Tataru Bjerg, Jesper J; B Jørgensen, Bo; Schramm, Andreas; Nielsen, Lars Peter

    2014-06-01

    Filamentous Desulfobulbaceae have been reported to conduct electrons over centimetre-long distances, thereby coupling oxygen reduction at the surface of marine sediment to sulphide oxidation in sub-surface layers. To understand how these 'cable bacteria' establish and sustain electric conductivity, we followed a population for 53 days after exposing sulphidic sediment with initially no detectable filaments to oxygen. After 10 days, cable bacteria and electric currents were established throughout the top 15 mm of the sediment, and after 21 days the filament density peaked with a total length of 2 km cm(-2). Cells elongated and divided at all depths with doubling times over the first 10 days of 98%. Comparison of the increase in biovolume and electric current density suggested high cellular growth efficiency. While the vertical expansion of filaments continued over time and reached 30 mm, the electric current density and biomass declined after 13 and 21 days, respectively. This might reflect a breakdown of short filaments as their solid sulphide sources became depleted in the top layers of the anoxic zone. In conclusion, cable bacteria combine rapid and efficient growth with oriented movement to establish and exploit the spatially separated half-reactions of sulphide oxidation and oxygen consumption.

  14. Electrical Conductivity of the Lower-Mantle Ferropericlase

    Energy Technology Data Exchange (ETDEWEB)

    Lin, J F; Weir, S T; Jackson, D D; Evans, W J; Vohra, Y K; Qiu, W; Yoo, C S

    2007-04-19

    Electrical conductivity of the lower-mantle ferropericlase-(Mg{sub 0.75},Fe{sub 0.25})O has been studied using designer diamond anvils to pressures over one megabar and temperatures up to 500 K. The electrical conductivity of (Mg{sub 0.75},Fe{sub 0.25})O gradually rises by an order of magnitude up to 50 GPa but decreases by a factor of approximately three between 50 to 70 GPa. This decrease in the electrical conductivity is attributed to the electronic high-spin to low-spin transition of iron in ferropericlase. That is, the electronic spin transition of iron results in a decrease in the mobility and/or density of the charge transfer carriers in the low-spin ferropericlase. The activation energy of the low-spin ferropericlase is 0.27 eV at 101 GPa, similar to that of the high-spin ferropericlase at relatively low temperatures. Our results indicate that low-spin ferropericlase exhibits lower electrical conductivity than high-spin ferropericlase, which needs to be considered in future geomagnetic models for the lower mantle. The extrapolated electrical conductivity of the low-spin ferropericlase, together with that of silicate perovskite, at the lower mantle pressure-temperature conditions is consistent with the model electrical conductivity profile of the lower mantle.

  15. Electric current characteristic of anodic bonding

    Science.gov (United States)

    He, Jun; Yang, Fang; Wang, Wei; Zhang, Li; Huang, Xian; Zhang, Dacheng

    2015-06-01

    In this paper, a novel current-time model of anodic bonding is proposed and verified experimentally in order to investigate underlying mechanisms of anodic bonding and to achieve real-time monitoring of bonding procedure. The proposed model provides a thorough explanation for the electric current characteristic of anodic bonding. More significantly, it explains two issues which other models cannot explain. One is the sharp rise in current when a voltage is initially applied during anodic bonding. The other is the unexpected large width of depletion layers. In addition, enlargement of the intimately contacted area during anodic bonding can be obtained from the proposed model, which can be utilized to monitor the bonding process. To verify the proposed model, Borofloat33 glass and silicon wafers were adopted in bonding experiments in SUSS SB6 with five different bonding conditions (350 °C 1200 V 370 °C 1200 V 380 °C 1200 V 380 °C 1000 V and 380 °C 1400 V). The results indicate that the observed current data highly coincide with the proposed current-time model. For widths of depletion layers, depth profiling using secondary ion mass spectrometry demonstrates that the calculated values by the model are basically consistent with the experimental values as well.

  16. Electrostatic Discharge Sensitivity and Electrical Conductivity of Composite Energetic Materials

    Energy Technology Data Exchange (ETDEWEB)

    Michael A. Daniels; Daniel J. Prentice; Chelsea Weir; Michelle L. Pantoya; Gautham Ramachandran; Tim Dallas

    2013-02-01

    Composite energetic material response to electrical stimuli was investigated and a correlation between electrical conductivity and ignition sensitivity was examined. The composites consisted of micrometer particle aluminum combined with another metal, metal oxide, or fluoropolymer. Of the nine tested mixtures, aluminum with copper oxide was the only mixture to ignite by electrostatic discharge with minimum ignition energy (MIE) of 25 mJ and an electrical conductivity of 1246.25 nS; two orders of magnitude higher than the next composite. This study showed a similar trend in MIE for ignition triggered by a discharged spark compared with a thermal hot wire source.

  17. Effect of Fly Ash on the Electrical Conductivity of Concretes

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The fly ash occasionally has high content of iron oxide and carbon that are good electrical conducting components. This paper investigates the effect of the fly ash used as mineral admixtures on the electrical conductivity of concretes. The electrical properties of concretes using 3 kinds of fly ash with different iron oxide contents have been studied. Experimental results show that at the same fly ash dosage the resistivity of concrete using fly ash with high content of iron oxide is slightly lower than that with low content of iron oxide. However, the concrete resistivity after 14d increases as fly ash dosage increases regardless of iron oxide content in fly ash.

  18. Thermal and Electrical Conductivity Measurements of CDA 510 Phosphor Bronze

    Science.gov (United States)

    Tuttle, James E.; Canavan, Edgar; DiPirro, Michael

    2009-01-01

    Many cryogenic systems use electrical cables containing phosphor bronze wire. While phosphor bronze's electrical and thermal conductivity values have been published, there is significant variation among different phosphor bronze formulations. The James Webb Space Telescope (JWST) will use several phosphor bronze wire harnesses containing a specific formulation (CDA 510, annealed temper). The heat conducted into the JWST instrument stage is dominated by these harnesses, and approximately half of the harness conductance is due to the phosphor bronze wires. Since the JWST radiators are expected to just keep the instruments at their operating temperature with limited cooling margin, it is important to know the thermal conductivity of the actual alloy being used. We describe an experiment which measured the electrical and thermal conductivity of this material between 4 and 295 Kelvin.

  19. Estimation of electric conductivity of the quark gluon plasma via asymmetric heavy-ion collisions

    CERN Document Server

    Hirono, Yuji; Hirano, Tetsufumi

    2012-01-01

    We show that in asymmetric heavy-ion collisions, especially off-central Cu+Au collisions, a sizable strength of electric field directed from Au nucleus to Cu nucleus is generated in the overlapping region, because of the difference in the number of electric charges between the two nuclei. This electric field would induce an electric current in the matter created after the collision, which result in a dipole deformation of the charge distribution. The directed flow parameters $v_1^{\\pm}$ of charged particles turn out to be sensitive to the charge dipole and provide us with information about electric conductivity of the quark gluon plasma.

  20. Improving electrical conductivity in polycarbonate nanocomposites using highly conductive PEDOT/PSS coated MWCNTs

    KAUST Repository

    Zhou, Jian

    2013-07-10

    We describe a strategy to design highly electrically conductive polycarbonate nanocomposites by using multiwalled carbon nanotubes (MWCNTs) coated with a thin layer of poly(3,4-ethylenedioxythiophene)/ poly(styrenesulfonate), a conductive polymer. We found that this coating method improves the electrical properties of the nanocomposites in two ways. First, the coating becomes the main electrical conductive path. Second, the coating promotes the formation of a percolation network at a low filler concentration (0.3 wt %). To tailor the electrical properties of the conductive polymer coating, we used a polar solvent ethylene glycol, and we can tune the final properties of the nanocomposite by controlling the concentrations of the elementary constituents or the intrinsic properties of the conductive polymer coating. This very flexible technique allows for tailoring the properties of the final product. © 2013 American Chemical Society.

  1. Lorentz force sigmometry: a novel technique for measuring the electrical conductivity of solid and liquid metals

    Science.gov (United States)

    Alkhalil, Shatha; Kolesnikov, Yurii; Thess, André

    2015-11-01

    In this paper, a novel method to measure the electrical conductivity of solid and molten metals is described. We term the method ‘Lorentz force sigmometry’, where the term ‘sigmometry’ refers to the letter sigma σ, often used to denote the electrical conductivity. The Lorentz force sigmometry method is based on the phenomenon of eddy currents generation in a moving conductor exposed to a magnetic field. Based on Ampere’s law, the eddy currents in turn generate a secondary magnetic field; as a result, the Lorentz force acts to brake the conductor. Owing to Newton’s third law, a measurable force, which is equal to the Lorentz force and is directly proportional to the electrical conductivity of the conductive fluid or solid, acts on the magnet. We present the results of the measurements performed on solids along with the initial measurements on fluids with a eutectic alloy composition of Ga67In20.5Sn12.5; detailed measurements on molten metals are still in progress and will be published in the future. We conducted a series of experiments and measured the properties of known electrical conductive metals, including aluminum and copper, to compute the calibration factor of the device, and then used the same calibration factor to estimate the unknown electrical conductivity of a brass bar. The predicted electrical conductivity of the brass bar was compared with the conductivity measured with a commercial device called ‘SigmaTest’ the observed error was less than 0.5%.

  2. Effects of Silver Microparticles and Nanoparticles on Thermal and Electrical Characteristics of Electrically Conductive Adhesives

    Science.gov (United States)

    Zulkarnain, M.; Fadzil, M. A.; Mariatti, M.; Azid, I. A.

    2017-08-01

    The effects of different volume fractions of silver (Ag) particles of different size (microsize, 2 μm to 3.5 μm diameter; nanosize, 80 nm diameter) on the thermal and electrical characteristics of epoxy-Ag electrically conductive adhesive (ECA) have been evaluated, as well as hybrid ECAs with both particle sizes at different ratios. Improved thermal and electrical conductivity resulted from the interaction between the particles, as evaluated by analysis of sample morphology. The interaction was altered to improve the conductivity. For both particle sizes, the electrical resistivity showed a transition from insulation to conduction at 6 vol.% Ag. In the hybrid system, the thermal conductivity decreased with increasing microparticle filler ratio. The electrical conductivity of the hybrid composite increased at 50:50 weight ratio.

  3. Determinants of the electric field during transcranial direct current stimulation.

    Science.gov (United States)

    Opitz, Alexander; Paulus, Walter; Will, Susanne; Antunes, Andre; Thielscher, Axel

    2015-04-01

    Transcranial direct current stimulation (tDCS) causes a complex spatial distribution of the electric current flow in the head which hampers the accurate localization of the stimulated brain areas. In this study we show how various anatomical features systematically shape the electric field distribution in the brain during tDCS. We constructed anatomically realistic finite element (FEM) models of two individual heads including conductivity anisotropy and different skull layers. We simulated a widely employed electrode montage to induce motor cortex plasticity and moved the stimulating electrode over the motor cortex in small steps to examine the resulting changes of the electric field distribution in the underlying cortex. We examined the effect of skull thickness and composition on the passing currents showing that thinner skull regions lead to higher electric field strengths. This effect is counteracted by a larger proportion of higher conducting spongy bone in thicker regions leading to a more homogenous current over the skull. Using a multiple regression model we could identify key factors that determine the field distribution to a significant extent, namely the thicknesses of the cerebrospinal fluid and the skull, the gyral depth and the distance to the anode and cathode. These factors account for up to 50% of the spatial variation of the electric field strength. Further, we demonstrate that individual anatomical factors can lead to stimulation "hotspots" which are partly resistant to electrode positioning. Our results give valuable novel insights in the biophysical foundation of tDCS and highlight the importance to account for individual anatomical factors when choosing an electrode montage. Copyright © 2015 Elsevier Inc. All rights reserved.

  4. Mechanically stiff, electrically conductive composites of polymers and carbon nanotubes

    Science.gov (United States)

    Worsley, Marcus A.; Kucheyev, Sergei O.; Baumann, Theodore F.; Kuntz, Joshua D.; Satcher, Jr., Joe H.; Hamza, Alex V.

    2015-07-21

    Using SWNT-CA as scaffolds to fabricate stiff, highly conductive polymer (PDMS) composites. The SWNT-CA is immersing in a polymer resin to produce a SWNT-CA infiltrated with a polymer resin. The SWNT-CA infiltrated with a polymer resin is cured to produce the stiff and electrically conductive composite of carbon nanotube aerogel and polymer.

  5. Establishing a conversion factor between electrical conductivity and ...

    African Journals Online (AJOL)

    2015-07-04

    Jul 4, 2015 ... Keywords: EC, electrical conductivity, mine water, TDS, total dissolved solids, SA, South Africa ... TDS is used to calculate the volume of sludge that will be generated by treating ... which the conductivity method is but one option (DWA, 2012). Several ..... drop correlating with a period of extensive rainfalls.

  6. Model for electrical conductivity of muscle meat during Ohmic heating

    NARCIS (Netherlands)

    Sman, van der R.G.M.

    2017-01-01

    A model is presented for predicting the electrical conductivity of muscle meat, which can be used for the evaluation of Ohmic heating. The model computes the conductivity as a function of composition, temperature and microstructure. The muscle meat is thought to be composed of protein, water, salt.

  7. Electrical conductivity in the precambrian lithosphere of western canada

    Science.gov (United States)

    Boerner; Kurtz; Craven; Ross; Jones; Davis

    1999-01-29

    The subcrustal lithosphere underlying the southern Archean Churchill Province (ACP) in western Canada is at least one order of magnitude more electrically conductive than the lithosphere beneath adjacent Paleoproterozoic crust. The measured electrical properties of the lithosphere underlying most of the Paleoproterozoic crust can be explained by the conductivity of olivine. Mantle xenolith and geological mapping evidence indicate that the lithosphere beneath the southern ACP was substantially modified as a result of being trapped between two nearly synchronous Paleoproterozoic subduction zones. Tectonically induced metasomatism thus may have enhanced the subcrustal lithosphere conductivity of the southern ACP.

  8. Evaluation of DC electric field distribution of PPLP specimen based on the measurement of electrical conductivity in LN2

    Science.gov (United States)

    Hwang, Jae-Sang; Seong, Jae-Kyu; Shin, Woo-Ju; Lee, Jong-Geon; Cho, Jeon-Wook; Ryoo, Hee-Suk; Lee, Bang-Wook

    2013-11-01

    High temperature superconducting (HTS) cable has been paid much attention due to its high efficiency and high current transportation capability, and it is also regarded as eco-friendly power cable for the next generation. Especially for DC HTS cable, it has more sustainable and stable properties compared to AC HTS cable due to the absence of AC loss in DC HTS cable. Recently, DC HTS cable has been investigated competitively all over the world, and one of the key components of DC HTS cable to be developed is a cable joint box considering HVDC environment. In order to achieve the optimum insulation design of the joint box, analysis of DC electric field distribution of the joint box is a fundamental process to develop DC HTS cable. Generally, AC electric field distribution depends on relative permittivity of dielectric materials but in case of DC, electrical conductivity of dielectric material is a dominant factor which determines electric field distribution. In this study, in order to evaluate DC electric field characteristics of the joint box for DC HTS cable, polypropylene laminated paper (PPLP) specimen has been prepared and its DC electric field distribution was analyzed based on the measurement of electrical conductivity of PPLP in liquid nitrogen (LN2). Electrical conductivity of PPLP in LN2 has not been reported yet but it should be measured for DC electric field analysis. The experimental works for measuring electrical conductivity of PPLP in LN2 were presented in this paper. Based on the experimental works, DC electric field distribution of PPLP specimen was fully analyzed considering the steady state and the transient state of DC. Consequently, it was possible to determine the electric field distribution characteristics considering different DC applying stages including DC switching on, DC switching off and polarity reversal conditions.

  9. Electrical conductivity of Cu-Ag in situ filamentary composites

    Institute of Scientific and Technical Information of China (English)

    NING Yuan-tao; ZHANG Xiao-hui; WU Yue-jun

    2007-01-01

    The electrical conductivity of Cu-10Ag in situ filamentary composite was studied during the deformation and annealing processes. The dependence of electrical resistivity of the deformed composites on the true strain presents a two-stage change with increase of the true strain. The intermediate heat treatment and the stabilized annealing treatment to the deformed composite promote the separation of Ag precipitate, and increase the electrical conductivity. The maximum conductivity of the composite experienced the stabilizing heat treatment can reach about 97% IACS with σb≥400 MPa at 550 ℃ annealing, and reach about 70% IACS with σb≥1 250 MPa at 300 ℃ annealing. The corresponded strength of the composite was reported. The microstructure reason for the changes of the conductivity was discussed.

  10. Drag Forces, Neutral Wind and Electric Conductivity Changes in the Ionospheric E Region

    CERN Document Server

    Nenovski, Petko

    2014-01-01

    The neutrals in the Earth environment are in fact free and subjected to drag forces (by ions). In this study we show that drag or friction forces in the ionosphere-thermosphere system initiate changes in the plasma flow, neutral wind, and the conductivity, as well. Ions and electrons embedded in neutral wind field of velocity u acquire drifts perpendicular both to the initial neutral wind velocity and to the ambient magnetic field producing a perpendicular electric current. This perpendicular electric current is defined by a conductivity derived previously and the polarization electric field u x B. Self-consistently, the free neutrals acquires an additional neutral velocity component perpendicular to the initial neutral wind velocity u. The Pedersen and Hall currents wane within a specific time inversely proportional to neutral-ion collision frequency. These findings are relevant to a better understanding of electric current generation, distribution and closure in weakly ionized plasmas where charged particle...

  11. Thermal conductivity, electrical conductivity and specific heat of copper-carbon fiber composite

    Science.gov (United States)

    Kuniya, Keiichi; Arakawa, Hideo; Kanai, Tsuneyuki; Chiba, Akio

    1988-01-01

    A new material of copper/carbon fiber composite is developed which retains the properties of copper, i.e., its excellent electrical and thermal conductivity, and the property of carbon, i.e., a small thermal expansion coefficient. These properties of the composite are adjustable within a certain range by changing the volume and/or the orientation of the carbon fibers. The effects of carbon fiber volume and arrangement changes on the thermal and electrical conductivity, and specific heat of the composite are studied. Results obtained are as follows: the thermal and electrical conductivity of the composite decrease as the volume of the carbon fiber increases, and were influenced by the fiber orientation. The results are predictable from a careful application of the rule of mixtures for composites. The specific heat of the composite was dependent, not on fiber orientation, but on fiber volume. In the thermal fatigue tests, no degradation in the electrical conductivity of this composite was observed.

  12. Improvement of metallic joint electrical conductivity using a novel conductive paste produced from recycled residues

    Directory of Open Access Journals (Sweden)

    Erivelto Luís de Souza

    2006-06-01

    Full Text Available In industry, the transmission of electricity usually requires high currents transported for very long distances, and in some cases, such as in aluminum plants, the use of high currents is essential for the reduction process. The connections between the electrical furnaces and the transmission cables are made with busbars, which can be comprised of either one or two different types of metal. In this transmission process, the main method to upgrade electrical circuit performance is by improving conductivity at the joint interface. Due to the need to reduce cost and simplify maintenance procedures, the interfaces at the joints are simply brushed, and conductive pastes are pressed between the contacting metals. The material most commonly used is a high-cost graphite paste, which is not produced by any Brazilian company. This paper presents a novel conductive paste, easily elaborated from industrial residues, involving low-cost production, yet presenting better results than those obtained with the graphite paste.A transmissão de eletricidade na indústria usualmente implica altas correntes transportadas por grandes distâncias e, em alguns casos, como em fábricas de alumínio, o uso de altas correntes é essencial no processo de redução. As conexões entre os cabos de transmissão e os fornos elétricos são feitas com barramentos, que podem ser de apenas um tipo de metal, ou de dois diferentes tipos. Nesse processo de transmissão, a principal maneira de aumentar o desempenho do circuito é através da melhoria da condutividade na interface das juntas elétricas. Devido às necessidades de redução de custos e de simplificação dos procedimentos de manutenção, as interfaces nas juntas são apenas escovadas e pastas contutoras são pressionadas entre os metais em contato. O material mais comumente usado é uma pasta condutora de grafite de alto custo, a qual não é produzida por nenhuma companhia brasileira. Esse artigo apresenta uma pasta

  13. On the Nature of Electric Current in the Electrospinning Process

    Directory of Open Access Journals (Sweden)

    Baturalp Yalcinkaya

    2013-01-01

    Full Text Available The electric currents between electrodes in the electrospinning process are based on the movement of charge carriers through the spinning space. The majority of the charge carriers are formed by ionization of the air close to the metallic needle and to the polymer jet. The salt contained in the polymer solution contributes to the concentration of charge carriers, depending on its amount. The conductivity of polymer jets does not significantly affect the current since the jets do not link the electrodes.

  14. Fabrication of highly conductive carbon nanotube fibers for electrical application

    Science.gov (United States)

    Guo, Fengmei; Li, Can; Wei, Jinquan; Xu, Ruiqiao; Zhang, Zelin; Cui, Xian; Wang, Kunlin; Wu, Dehai

    2015-09-01

    Carbon nanotubes (CNTs) have great potential for use as electrical wires because of their outstanding electrical and mechanical properties. Here, we fabricate lightweight CNT fibers with electrical conductivity as high as that of stainless steel from macroscopic CNT films by drawing them through diamond wire-drawing dies. The entangled CNT bundles are straightened by suffering tension, which improves the alignment of the fibers. The loose fibers are squeezed by the diamond wire-drawing dies, which reduces the intertube space and contact resistance. The CNT fibers prepared by drawing have an electrical conductivity as high as 1.6 × 106 s m-1. The fibers are very stable when kept in the air and under cyclic tensile test. A prototype of CNT motor is demonstrated by replacing the copper wires with the CNT fibers.

  15. Laboratory-based electrical conductivity at Martian mantle conditions

    Science.gov (United States)

    Verhoeven, Olivier; Vacher, Pierre

    2016-12-01

    Information on temperature and composition of planetary mantles can be obtained from electrical conductivity profiles derived from induced magnetic field analysis. This requires a modeling of the conductivity for each mineral phase at conditions relevant to planetary interiors. Interpretation of iron-rich Martian mantle conductivity profile therefore requires a careful modeling of the conductivity of iron-bearing minerals. In this paper, we show that conduction mechanism called small polaron is the dominant conduction mechanism at temperature, water and iron content conditions relevant to Mars mantle. We then review the different measurements performed on mineral phases with various iron content. We show that, for all measurements of mineral conductivity reported so far, the effect of iron content on the activation energy governing the exponential decrease in the Arrhenius law can be modeled as the cubic square root of the iron content. We recast all laboratory results on a common generalized Arrhenius law for iron-bearing minerals, anchored on Earth's mantle values. We then use this modeling to compute a new synthetic profile of Martian mantle electrical conductivity. This new profile matches perfectly, in the depth range [100,1000] km, the electrical conductivity profile recently derived from the study of Mars Global Surveyor magnetic field measurements.

  16. Electrically conductive carbon fibre-reinforced composite for aircraft lightning strike protection

    Science.gov (United States)

    Katunin, Andrzej; Krukiewicz, Katarzyna; Turczyn, Roman; Sul, Przemysław; Bilewicz, Marcin

    2017-05-01

    Aircraft elements, especially elements of exterior fuselage, are subjected to damage caused by lightning strikes. Due to the fact that these elements are manufactured from polymeric composites in modern aircraft, and thus, they cannot conduct electrical charges, the lightning strikes cause burnouts in composite structures. Therefore, the effective lightning strike protection for such structures is highly desired. The solution presented in this paper is based on application of organic conductive fillers in the form of intrinsically conducting polymers and carbon fabric in order to ensure electrical conductivity of whole composite and simultaneously retain superior mechanical properties. The presented studies cover synthesis and manufacturing of the electrically conductive composite as well as its characterization with respect to mechanical and electrical properties. The performed studies indicate that the proposed material can be potentially considered as a constructional material for aircraft industry, which characterizes by good operational properties and low cost of manufacturing with respect to current lightning strike protection materials solutions.

  17. Coupling between Surface Plasmon Resonance and electric current in Au stripes

    Science.gov (United States)

    Garcia, Miguel Angel; Serrano, Aida; de La Venta, Jose

    2009-03-01

    Surface Plasmon Resonance (SPR) is the most outstanding feature of noble metal films. SPR consists on a collective oscillation of the conduction electrons when excited optically in the appropriate geometrical and energy conditions. The electrical current passing trough the metal film involves also the movement of conduction electrons. Thus, coupling effects are expected between SPR and electrical resistivity. A modification of the SPR when a electrical current passes through the film, could allow the modulation of an optical signal by a electrical one. Similarly, when the film is illuminated at the SPR conditions, the oscillation of the conduction electrons and local heating can induce an enhancement of the electric resistivity that can be used to translate an optical signal into a electric one. Those effects could be useful in the development of new fast optoelectronic transducers. We present here results on Au stripes illuminated to induce the SPR while electric currents flow with different orientation with respect to the light polarization

  18. Technology to prevent deposition of marine organisms by means of electrically conductive coating. Discussions on current and potential distribution by using experiments; Doden tomaku ni yoru kaiyo seibutsu fuchaku boshi gijutsu. Denryu den`i bunpu ni kansuru jikken ni yoru kento

    Energy Technology Data Exchange (ETDEWEB)

    Usami, M.; Masaki, T. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan); Ueda, K.

    1996-04-10

    Steel structures in sea water and surface of hulls are deposited with such marine organisms as microorganisms, algae and shellfish. The deposition causes a large problem such as occurrence of abnormal local corrosion in the structures, and increase in cruising resistance in ocean vessels. The present study has introduced a simplified equation of estimation for current and potential distribution in parts coated with an electrically conductive film, and verified its reasonability by an experiment. The equation of estimation was introduced by following a model of current flow in the electrically conductive coating. The experiment has the conductive coating applied to the interior of a concrete water tank with a length of 10.8 m, a width of 5 m and a depth of 3 m to measure potential at different locations. The conductive coating was energized from copper foils attached on each applied face, whereas the current was applied to two faces between the conductive films as a pair among the four coating applied faces to measure potential in each location. A simulated calculation revealed that the potential range in the depth direction is made smaller if specific resistance of the conductive film is decreased, and made greater if increased. Effectiveness of the equation of estimation was verified by an experiment. This method has provided a prospect of achieving optimization of the specification for application of the conductive film. 2 refs., 7 figs.

  19. Electrical conductivity of rigid polyurethane foam at high temperature

    Science.gov (United States)

    Johnson, R. T., Jr.

    1982-08-01

    The electrical conductivity of rigid polyurethane foam, used for electronic encapsulation, was measured during thermal decomposition to 3400 C. At higher temperatures the conductance continues to increase. With pressure loaded electrical leads, sample softening results in eventual contact between electrodes which produces electrical shorting. Air and nitrogen environments show no significant dependence of the conductivity on the atmosphere over the temperature range. The insulating characteristics of polyurethane foam below approx. 2700 C are similar to those for silicone based materials used for electronic case housings and are better than those for phenolics. At higher temperatures (greater than or equal to 2700 C) the phenolics appear to be better insulators to approx. 5000 C and the silicones to approx. 6000 C. It is concluded that the Sylgard 184/GMB encapsulant is a significantly better insulator at high temperature than the rigid polyurethane foam.

  20. Electrical conduction mechanism in GeSeSb chalcogenide glasses

    Indian Academy of Sciences (India)

    Vandana Kumari; Anusaiya Kaswan; D Patidar; Kananbala Sharma; N S Saxena

    2016-02-01

    Electrical conductivity of chalcogenide glassy system Ge$_{30−x}$Se$_{70}$Sb$_{x}$ ( = 10, 15, 20 and 25) prepared by melt quenching has been determined at different temperatures in bulk through the $I$–$V$ characteristic curves. It is quite evident from results that Poole–Frenkel conduction mechanisms hold good for conduction in these glasses in a given temperature range. The variation in electrical conductivity with composition was attributed to the Se–Sb bond concentration in the Se–Ge–Sb system. Results indicated that Ge$_5$Se$_{70}$Sb$_{25}$ showed the minimum resistance. In view of this the composition Ge$_5$Se$_{70}$Sb$_{25}$ may be coined as ‘critical composition’ in the proposed series. Also the activation energies of conduction of these glassy alloys have been calculated in higher and lower temperature range using the Arrhenius equation.

  1. Electrical Conductivity of HgTe at High Temperatures

    Science.gov (United States)

    Li, C.; Lehoczky, S. L.; Su, C.-H.; Scripa, R. N.

    2004-01-01

    The electrical conductivity of HgTe was measured using a rotating magnetic field method from 300 K to the melting point (943 K). A microscopic theory for electrical conduction was used to calculate the expected temperature dependence of the HgTe conductivity. A comparison between the measured and calculated conductivities was used to obtain the estimates of the temperature dependence of Gamma(sub 6)-Gamma(sub 8) energy gap from 300 K to 943 K. The estimated temperature coefficient for the energy gap was comparable to the previous results at lower temperatures (less than or equal to 300 K). A rapid increase in the conductivity just above 300 K and a subsequent decrease at 500 K is attributed to band crossover effects. This paper describes the experimental approach and some of the theoretical calculation details.

  2. Direct Current Hopping Conductivity in One-Dimensional Nanometre Systems

    Institute of Scientific and Technical Information of China (English)

    宋祎璞; 徐慧; 罗峰

    2003-01-01

    A one-dimensional random nanocrystalline chain model is established. A dc electron-phonon-field conductance model of electron tunnelling transfer is set up, and a new dc conductance formula in one-dimensional nanometre systems is derived. By calculating the dc conductivity, the relationship among the electric field, temperature and conductivity is analysed, and the effect of the crystalline grain size and the distortion of interfacial atoms on the dc conductance is discussed. The result shows that the nanometre system appears the characteristic of negative differential dependence of resistance and temperature at low temperature. The dc conductivity of nanometre systems varies with the change of electric field and trends to rise as the crystalline grain size increases and to decrease as the distorted degree of interfacial atoms increases.

  3. Thermal and electrical conductivity of iron at Earth's core conditions.

    Science.gov (United States)

    Pozzo, Monica; Davies, Chris; Gubbins, David; Alfè, Dario

    2012-04-11

    The Earth acts as a gigantic heat engine driven by the decay of radiogenic isotopes and slow cooling, which gives rise to plate tectonics, volcanoes and mountain building. Another key product is the geomagnetic field, generated in the liquid iron core by a dynamo running on heat released by cooling and freezing (as the solid inner core grows), and on chemical convection (due to light elements expelled from the liquid on freezing). The power supplied to the geodynamo, measured by the heat flux across the core-mantle boundary (CMB), places constraints on Earth's evolution. Estimates of CMB heat flux depend on properties of iron mixtures under the extreme pressure and temperature conditions in the core, most critically on the thermal and electrical conductivities. These quantities remain poorly known because of inherent experimental and theoretical difficulties. Here we use density functional theory to compute these conductivities in liquid iron mixtures at core conditions from first principles--unlike previous estimates, which relied on extrapolations. The mixtures of iron, oxygen, sulphur and silicon are taken from earlier work and fit the seismologically determined core density and inner-core boundary density jump. We find both conductivities to be two to three times higher than estimates in current use. The changes are so large that core thermal histories and power requirements need to be reassessed. New estimates indicate that the adiabatic heat flux is 15 to 16 terawatts at the CMB, higher than present estimates of CMB heat flux based on mantle convection; the top of the core must be thermally stratified and any convection in the upper core must be driven by chemical convection against the adverse thermal buoyancy or lateral variations in CMB heat flow. Power for the geodynamo is greatly restricted, and future models of mantle evolution will need to incorporate a high CMB heat flux and explain the recent formation of the inner core.

  4. Computational analysis of electrical conduction in hybrid nanomaterials with embedded non-penetrating conductive particles

    Science.gov (United States)

    Cai, Jizhe; Naraghi, Mohammad

    2016-08-01

    In this work, a comprehensive multi-resolution two-dimensional (2D) resistor network model is proposed to analyze the electrical conductivity of hybrid nanomaterials made of insulating matrix with conductive particles such as CNT reinforced nanocomposites and thick film resistors. Unlike existing approaches, our model takes into account the impenetrability of the particles and their random placement within the matrix. Moreover, our model presents a detailed description of intra-particle conductivity via finite element analysis, which to the authors’ best knowledge has not been addressed before. The inter-particle conductivity is assumed to be primarily due to electron tunneling. The model is then used to predict the electrical conductivity of electrospun carbon nanofibers as a function of microstructural parameters such as turbostratic domain alignment and aspect ratio. To simulate the microstructure of single CNF, randomly positioned nucleation sites were seeded and grown as turbostratic particles with anisotropic growth rates. Particle growth was in steps and growth of each particle in each direction was stopped upon contact with other particles. The study points to the significant contribution of both intra-particle and inter-particle conductivity to the overall conductivity of hybrid composites. Influence of particle alignment and anisotropic growth rate ratio on electrical conductivity is also discussed. The results show that partial alignment in contrast to complete alignment can result in maximum electrical conductivity of whole CNF. High degrees of alignment can adversely affect conductivity by lowering the probability of the formation of a conductive path. The results demonstrate approaches to enhance electrical conductivity of hybrid materials through controlling their microstructure which is applicable not only to carbon nanofibers, but also many other types of hybrid composites such as thick film resistors.

  5. Corrosion-protective coatings from electrically conducting polymers

    Science.gov (United States)

    Thompson, Karen Gebert; Bryan, Coleman J.; Benicewicz, Brian C.; Wrobleski, Debra A.

    1991-01-01

    In a joint effort between NASA Kennedy and LANL, electrically conductive polymer coatings were developed as corrosion protective coatings for metal surfaces. At NASA Kennedy, the launch environment consist of marine, severe solar, and intermittent high acid and/or elevated temperature conditions. Electrically conductive polymer coatings were developed which impart corrosion resistance to mild steel when exposed to saline and acidic environments. Such coatings also seem to promote corrosion resistance in areas of mild steel where scratches exist in the protective coating. Such coatings appear promising for many commercial applications.

  6. How Can Soil Electrical Conductivity Measurements Control Soil Pollution?

    Directory of Open Access Journals (Sweden)

    Mohammad Reza

    2010-10-01

    Full Text Available Soil pollution results from the build up of contaminants, toxic compounds, radioactive materials, salts, chemicals and cancer-causing agents. The most common soil pollutants are hydrocarbons, heavy metals (cadmium, lead, chromium, copper, zinc, mercury and arsenic, herbicides, pesticides, oils, tars, PCBs and dioxins. Soil Electrical Conductivity (EC is one of the soil physical properties w hich have a good relationship with the other soil characteristics. As measuring soil electrical conductivity is easier, less expensive and faster than other soil properties measurements, using a detector that can do on the go soil EC measurements is a good tool for obtaining useful information about soil pollution condition.

  7. Electrical conductivity measurements on silicate melts using the loop technique

    Science.gov (United States)

    Waff, H. S.

    1976-01-01

    A new method is described for measurement of the electrical conductivity of silicate melts under controlled oxygen partial pressure at temperatures to 1550 C. The melt samples are suspended as droplets on platinum-rhodium loops, minimizing iron loss from the melt due to alloying with platinum, and providing maximum surface exposure of the melt to the oxygen-buffering gas atmosphere. The latter provides extremely rapid equilibration of the melt with the imposed oxygen partial pressure. The loop technique involves a minimum of setup time and cost, provides reproducible results to within + or - 5% and is well suited to electrical conductivity studies on silicate melts containing redox cations.

  8. Estimates of olivine-basaltic melt electrical conductivity using a digital rock physics approach

    Science.gov (United States)

    Miller, Kevin J.; Montési, Laurent G. J.; Zhu, Wen-lu

    2015-12-01

    Estimates of melt content beneath fast-spreading mid-ocean ridges inferred from magnetotelluric tomography (MT) vary between 0.01 and 0.10. Much of this variation may stem from a lack of understanding of how the grain-scale melt geometry influences the bulk electrical conductivity of a partially molten rock, especially at low melt fraction. We compute bulk electrical conductivity of olivine-basalt aggregates over 0.02 to 0.20 melt fraction by simulating electric current in experimentally obtained partially molten geometries. Olivine-basalt aggregates were synthesized by hot-pressing San Carlos olivine and high-alumina basalt in a solid-medium piston-cylinder apparatus. Run conditions for experimental charges were 1.5 GPa and 1350 °C. Upon completion, charges were quenched and cored. Samples were imaged using synchrotron X-ray micro-computed tomography (μ-CT). The resulting high-resolution, 3-dimensional (3-D) image of the melt distribution constitutes a digital rock sample, on which numerical simulations were conducted to estimate material properties. To compute bulk electrical conductivity, we simulated a direct current measurement by solving the current continuity equation, assuming electrical conductivities for olivine and melt. An application of Ohm's Law yields the bulk electrical conductivity of the partially molten region. The bulk electrical conductivity values for nominally dry materials follow a power-law relationship σbulk = Cσmeltϕm with fit parameters m = 1.3 ± 0.3 and C = 0.66 ± 0.06. Laminar fluid flow simulations were conducted on the same partially molten geometries to obtain permeability, and the respective pathways for electrical current and fluid flow over the same melt geometry were compared. Our results indicate that the pathways for flow fluid are different from those for electric current. Electrical tortuosity is lower than fluid flow tortuosity. The simulation results are compared to existing experimental data, and the potential

  9. Model of electrical conductivity of skeletal muscle based on tissue structure

    NARCIS (Netherlands)

    Gielen, F.L.H.; Cruts, H.E.P.; Alberts, B.A.; Boon, K.L.; Wallinga, W.; Boom, H.B.K.

    1986-01-01

    Recent experiments carried out in our laboratory with the four-electrode method showed that the electrical conductivity of skeletal muscle tissue depends on the frequency of the injected current and the distance between the current electrodes. A model is proposed in order to study these effects. The

  10. Electric currents in networks of interconnected memristors.

    Science.gov (United States)

    Nedaaee Oskoee, Ehsan; Sahimi, Muhammad

    2011-03-01

    Chua [IEEE Trans. Circuit Theory 1, 507 (1971).] argued that, in addition to the standard resistors, capacitors, and inductors, there must be a fourth fundamental element in electrical circuits, which he called a memory resistor or memristor. Strukov et al. [Nature (London) 453, 80 (2008)] showed how memristive behavior arises in some thin semiconducting films. Unlike other passive elements, however, a memristor with large sizes cannot be fabricated, because scale up of a memristor to dimensions of the order of microns causes loss of the memristive effect by decreasing the width of the doped region relative to the overall size of the memristor. A microscale memristor is, however, essential to most of the potential applications. One way of fabricating such a microscale memristor without losing the memristive effect is to make a network of very small interconnected memristors. We report the results of numerical simulations of electrical currents in such networks of interconnected memristors, as well as memristors and Ohmic conductors. The memristor networks exhibit a rich variety of interesting properties, including weakly and strongly memristive regimes, a possible first-order transition at the connectivity threshold, generation of second harmonics in the strongly memristive regime, and the universal dependence of the network's strength on the frequency. Moreover, we show that the polarity of the memristors can play an important role in the overall properties of the memristor network, in particular its speed of switching, which may have a potentially important application to faster computers. None of these properties are exhibited by linear resistor networks, or even by nonlinear resistor networks without a memory effect.

  11. Effect of aligned carbon nanotubes on electrical conductivity behaviour in polycarbonate matrix

    Indian Academy of Sciences (India)

    M M Larijani; E J Khamse; Z Asadollahi; M Asadi

    2012-06-01

    This article reports effects of alignment of embedded carbon nanotubes in a polycarbonate polymer matrix under magnetic, direct and alternating current electric fields on the electrical properties of the resulting nanocomposites. Composites consisting of different quantities of carbon nanotubes in a polycarbonate matrix have been prepared using a solution casting technique. The effects of field strength and nanotube concentration on the resulted network structure and conductivity of the composites were studied by in situ optical microscopy, transmission electron microscopy and four-point probe technique. The results showed that the composites prepared in the presence of field had better conductivity than those of as-prepared composites. It was also concluded that the application of alternating current electric field and magnetic field in this system led to the formation of relatively continuing networks while direct current electric field only prevented agglomeration of the carbon nanotubes in the polycarbonate matrix and created relatively uniform distribution of nanotubes in the matrix.

  12. The effect of water on the electrical conductivity of olivine.

    Science.gov (United States)

    Wang, Duojun; Mookherjee, Mainak; Xu, Yousheng; Karato, Shun-ichiro

    2006-10-26

    It is well known that water (as a source of hydrogen) affects the physical and chemical properties of minerals--for example, plastic deformation and melting temperature--and accordingly plays an important role in the dynamics and geochemical evolution of the Earth. Estimating the water content of the Earth's mantle by direct sampling provides only a limited data set from shallow regions (olivine, the most abundant mineral in the Earth's mantle. Here we report a laboratory study of the dependence of the electrical conductivity of olivine aggregates on water content at high temperature and pressure. The electrical conductivity of synthetic polycrystalline olivine was determined from a.c. impedance measurements at a pressure of 4 GPa for a temperature range of 873-1,273 K for water contents of 0.01-0.08 wt%. The results show that the electrical conductivity is strongly dependent on water content but depends only modestly on temperature. The water content dependence of conductivity is best explained by a model in which electrical conduction is due to the motion of free protons. A comparison of the laboratory data with geophysical observations suggests that the typical oceanic asthenosphere contains approximately 10(-2) wt% water, whereas the water content in the continental upper mantle is less than approximately 10(-3) wt%.

  13. Iodine doped carbon nanotube cables exceeding specific electrical conductivity of metals

    Science.gov (United States)

    Zhao, Yao; Wei, Jinquan; Vajtai, Robert; Ajayan, Pulickel M.; Barrera, Enrique V.

    2011-09-01

    Creating highly electrically conducting cables from macroscopic aggregates of carbon nanotubes, to replace metallic wires, is still a dream. Here we report the fabrication of iodine-doped, double-walled nanotube cables having electrical resistivity reaching ~10-7 Ω.m. Due to the low density, their specific conductivity (conductivity/weight) is higher than copper and aluminum and is only just below that of the highest specific conductivity metal, sodium. The cables exhibit high current-carrying capacity of 104~105 A/cm2 and can be joined together into arbitrary length and diameter, without degradation of their electrical properties. The application of such nanotube cables is demonstrated by partly replacing metal wires in a household light bulb circuit. The conductivity variation as a function of temperature for the cables is five times smaller than that for copper. The high conductivity nanotube cables could find a range of applications, from low dimensional interconnects to transmission lines.

  14. Electrical conduction mechanism in bulk ceramic insulators at high voltages until dielectric breakdown

    Science.gov (United States)

    Neusel, C.; Jelitto, H.; Schneider, G. A.

    2015-04-01

    In order to develop and verify a dielectric breakdown model for bulk insulators thicker than 100 μm, the knowledge of the dominating conduction mechanism at high electric fields, or respectively voltages, is necessary. The dielectric breakdown is the electrical failure of an insulator. In some existing breakdown models, ohmic conduction is assumed as dominating conduction mechanism. For verification, the dominating dc conduction mechanism of bulk insulators at room temperature was investigated by applying high voltages up to 70 kV to the insulator until dielectric breakdown occurs. Four conduction models, namely, ohmic, space charge limited, Schottky, and Poole-Frenkel conduction, were employed to identify the dominating conduction mechanism. Comparing the calculated permittivities from the Schottky and Poole-Frenkel coefficients with experimentally measured permittivity, Schottky and Poole-Frenkel conduction can be excluded as dominating conduction mechanism. Based on the current density voltage characteristics (J-V-curve) and the thickness-dependence of the current density, space charge limited conduction (SCLC) was identified to be the dominating conduction mechanism at high voltages leading to dielectric breakdown. As a consequence, breakdown models based on ohmic conduction are not appropriate to explain the breakdown of the investigated bulk insulators. Furthermore, the electrical failure of the examined bulk insulators can only be described correctly by a breakdown model which includes SCLC as conduction mechanism.

  15. Self-healable electrically conducting wires for wearable microelectronics.

    Science.gov (United States)

    Sun, Hao; You, Xiao; Jiang, Yishu; Guan, Guozhen; Fang, Xin; Deng, Jue; Chen, Peining; Luo, Yongfeng; Peng, Huisheng

    2014-09-01

    Electrically conducting wires play a critical role in the advancement of modern electronics and in particular are an important key to the development of next-generation wearable microelectronics. However, the thin conducting wires can easily break during use, and the whole device fails to function as a result. Herein, a new family of high-performance conducting wires that can self-heal after breaking has been developed by wrapping sheets of aligned carbon nanotubes around polymer fibers. The aligned carbon nanotubes offer an effective strategy for the self-healing of the electric conductivity, whereas the polymer fiber recovers its mechanical strength. A self-healable wire-shaped supercapacitor fabricated from a wire electrode of this type maintained a high capacitance after breaking and self-healing.

  16. Estimating Upper Mantle Hydration from In Situ Electrical Conductivity

    Science.gov (United States)

    Behrens, J.; Constable, S.; Heinson, G.; Everett, M.; Weiss, C.; Key, K.

    2004-12-01

    The electrical conductivity of 35-40 Ma Pacific plate has been measured in situ; one robust result is the presence of bulk anisotropy in the lithospheric upper mantle. We interpret this anisotropy to be a result of hydrothermal circulation into the upper mantle along spreading-ridge-parallel normal faults: the associated zones of serpentinized peridotite provide the pathways of enhanced electrical conductivity required by the data. Our modeling bounds the range of possible anisotropic ratios, which are then used to estimate the amount of water required to serpentinize the requisite amounts of peridotite. These data sets, however, do not indicate anisotropy in the bulk conductivity of the crust, nor in the asthenospheric mantle. This second point is significant, as recent measurements of sub-continental asthenospheric conductivity have been interpreted to indicate anisotropy aligned with present plate motion, with the diffusion of hydrogen through olivine advanced as an explanation.

  17. Electrical Conductivity of Synthetic Quartz Crystals at High Temperature and Pressure from Complex Impedance Measurements

    Institute of Scientific and Technical Information of China (English)

    王多君; 李和平; 刘丛强; 易丽; 丁东业; 苏根利; 张卫刚

    2002-01-01

    An electrical conductivity measurement system under high-pressure conditions with a multi-anvil high-pressure apparatus by an ac complex impedance method was set up. With this system, we have successfully measured the electrical conductivity of synthetic quartz under pressure up to approximately 1.0 GPa in the temperature range 661-987K. The values of electrical conductivity decrease with the increasing pressure and increase with the increasing temperature. The activation enthalpies for the α-quartz crystals are 1.10-1.28eV. The electrical conductivity of α-quartz is ionic, with Na ions moving in channels parallel to the c-axis being the predominant current carrier.

  18. Illustrating Electric Conductivity Using the Particle-in-a-Box Model: Quantum Superposition is the Key

    CERN Document Server

    Sivanesan, Umaseh; Izmaylov, Artur F

    2016-01-01

    Most of the textbooks explaining electric conductivity in the context of quantum mechanics provide either incomplete or semi-classical explanations that are not connected with the elementary concepts of quantum mechanics. We illustrate the conduction phenomena using the simplest model system in quantum dynamics, a particle in a box (PIB). To induce the particle dynamics, a linear potential tilting the bottom of the box is introduced, which is equivalent to imposing a constant electric field for a charged particle. Although the PIB model represents a closed system that cannot have a flow of electrons through the system, we consider the oscillatory dynamics of the particle probability density as the analogue of the electric current. Relating the amplitude and other parameters of the particle oscillatory dynamics with the gap between the ground and excited states of the PIB model allows us to demonstrate one of the most basic dependencies of electric conductivity on the valence-conduction band gap of the materia...

  19. Measurement of electrical conductivity of micron-scale metallic wires

    Institute of Scientific and Technical Information of China (English)

    JU Bing-feng; JU Yang

    2006-01-01

    Electrical conductivities of micron-scale aluminum wires were quantitatively measured by a four-point atomic force microscope (AFM) probe. This technique is a combination of the principles of the four-point probe method and standard AFM. This technique was applied to the 99.999% aluminum wires with 350 nm thickness and different widths of 5.0,25.0 and 50.0 μm. Since the small dimensions of the wires,the geometrical effects were discussed in details. Experiment results show that the four-point AFM probe is mechanically flexible and robust. The four-point AFM probe technique is capable of measuring surface topography together with local electrical conductivity simultaneously. The repeatable measurements indicate that this technique could be used for fast in-situ electrical properties characterization of sensors and microelectromechanical system devices.

  20. On the flow dependency of the electrical conductivity of blood

    NARCIS (Netherlands)

    Hoetink, AE; Faes, TJC; Visser, KR; Heethaar, RM

    Experiments presented in the literature show that the electrical conductivity of flowing blood depends on flow velocity. The aim of this study is to extend the Maxwell-Fricke theory, developed for a dilute suspension of ellipsoidal particles in an electrolyte, to explain this flow dependency of the

  1. On the flow dependency of the electrical conductivity of blood

    NARCIS (Netherlands)

    Hoetink, AE; Faes, TJC; Visser, KR; Heethaar, RM

    2004-01-01

    Experiments presented in the literature show that the electrical conductivity of flowing blood depends on flow velocity. The aim of this study is to extend the Maxwell-Fricke theory, developed for a dilute suspension of ellipsoidal particles in an electrolyte, to explain this flow dependency of the

  2. Electrical Conductivity of milk: ability to predict mastitis status

    NARCIS (Netherlands)

    Norberg, E.; Hogeveen, H.; Korsgaard, I.R.; Friggens, N.C.; Sloth, K.H.M.N.; Lovendahl, P.

    2004-01-01

    Electrical conductivity (EC) of milk has been introduced as an indicator trait for mastitis over the last decade, and it may be considered as a potential trait in a breeding program where selection for improved udder health is included. In this study, various EC traits were investigated for their as

  3. Electrical Conductivity, Thermal Behavior, and Seebeck Coefficient of Conductive Films for Printed Thermoelectric Energy Harvesting Systems

    Science.gov (United States)

    Ankireddy, Krishnamraju; Menon, Akanksha K.; Iezzi, Brian; Yee, Shannon K.; Losego, Mark D.; Jur, Jesse S.

    2016-11-01

    Printed electronics is being explored as a rapid, facile means for manufacturing thermoelectric generators (TEGs) that can recover useful electrical energy from waste heat. This work examines the relevant electrical conductivity, thermal resistance, thermovoltage, and Seebeck coefficient of printed films for use in such printed flexible TEGs. The thermoelectric performance of TEGs printed using commercially relevant nickel, silver, and carbon inks is evaluated. The microstructure of the printed films is investigated to better understand why the electrical conductivity and Seebeck coefficient are degraded. Thermal conduction is shown to be relatively insensitive to the type of metalized coating and nearly equivalent to that of an uncoated polymer substrate. Of the commercially available conductive ink materials examined, carbon-nickel TEGs are shown to exhibit the highest thermovoltage, with a value of 10.3 μV/K. However, silver-nickel TEGs produced the highest power generation of 14.6 μW [from 31 junctions with temperature difference (Δ T) of 113°C] due to their low electrical resistance. The voltage generated from the silver-nickel TEG was stable under continuous operation at 275°C for 3 h. We have also demonstrated that, after a year of storage in ambient conditions, these devices retain their performance. Notably, the electrical conductivity and Seebeck coefficient measured for individual materials were consistent with those measured from actual printed TEG device structures, validating the need for further fundamental materials characterization to accelerate flexible TEG device optimization.

  4. 9 CFR 313.30 - Electrical; stunning or slaughtering with electric current.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Electrical; stunning or slaughtering with electric current. 313.30 Section 313.30 Animals and Animal Products FOOD SAFETY AND INSPECTION... Electrical; stunning or slaughtering with electric current. The slaughtering of swine, sheep, calves,...

  5. Modelling electrical conductivity of groundwater using an adaptive neuro-fuzzy inference system

    NARCIS (Netherlands)

    B. Tutmez (Bulent); Z. Hatipoglu (Z.); U. Kaymak (Uzay)

    2006-01-01

    textabstractElectrical conductivity is an important indicator for water quality assessment. Since the composition of mineral salts affects the electrical conductivity of groundwater, it is important to understand the relationships between mineral salt composition and electrical conductivity. In this

  6. Microstructural inhomogeneity of electrical conductivity in subcutaneous fat tissue.

    Directory of Open Access Journals (Sweden)

    Ilja L Kruglikov

    Full Text Available Microscopic peculiarities stemming from a temperature increase in subcutaneous adipose tissue (sWAT after applying a radio-frequency (RF current, must be strongly dependent on the type of sWAT. This effect is connected with different electrical conductivities of pathways inside (triglycerides in adipocytes and outside (extra-cellular matrix the cells and to the different weighting of these pathways in hypertrophic and hyperplastic types of sWAT. The application of the RF current to hypertrophic sWAT, which normally has a strongly developed extracellular matrix with high concentrations of hyaluronan and collagen in a peri-cellular space of adipocytes, can produce, micro-structurally, a highly inhomogeneous temperature distribution, characterized by strong temperature gradients between the peri-cellular sheath of the extra-cellular matrix around the hypertrophic adipocytes and their volumes. In addition to normal temperature effects, which are generally considered in body contouring, these temperature gradients can produce thermo-mechanical stresses on the cells' surfaces. Whereas these stresses are relatively small under normal conditions and cannot cause any direct fracturing or damage of the cell structure, these stresses can, under some supportive conditions, be theoretically increased by several orders of magnitude, causing the thermo-mechanical cell damage. This effect cannot be realized in sWAT of normal or hyperplastic types where the peri-cellular structures are under-developed. It is concluded that the results of RF application in body contouring procedures must be strongly dependent on the morphological structure of sWAT.

  7. Microstructural inhomogeneity of electrical conductivity in subcutaneous fat tissue.

    Science.gov (United States)

    Kruglikov, Ilja L

    2015-01-01

    Microscopic peculiarities stemming from a temperature increase in subcutaneous adipose tissue (sWAT) after applying a radio-frequency (RF) current, must be strongly dependent on the type of sWAT. This effect is connected with different electrical conductivities of pathways inside (triglycerides in adipocytes) and outside (extra-cellular matrix) the cells and to the different weighting of these pathways in hypertrophic and hyperplastic types of sWAT. The application of the RF current to hypertrophic sWAT, which normally has a strongly developed extracellular matrix with high concentrations of hyaluronan and collagen in a peri-cellular space of adipocytes, can produce, micro-structurally, a highly inhomogeneous temperature distribution, characterized by strong temperature gradients between the peri-cellular sheath of the extra-cellular matrix around the hypertrophic adipocytes and their volumes. In addition to normal temperature effects, which are generally considered in body contouring, these temperature gradients can produce thermo-mechanical stresses on the cells' surfaces. Whereas these stresses are relatively small under normal conditions and cannot cause any direct fracturing or damage of the cell structure, these stresses can, under some supportive conditions, be theoretically increased by several orders of magnitude, causing the thermo-mechanical cell damage. This effect cannot be realized in sWAT of normal or hyperplastic types where the peri-cellular structures are under-developed. It is concluded that the results of RF application in body contouring procedures must be strongly dependent on the morphological structure of sWAT.

  8. Current Reversal and Negative Conductance for a Super-Conducting Junctions Device

    Institute of Scientific and Technical Information of China (English)

    LI Jing-Hui

    2009-01-01

    In the paper, we study a super-conducting junctions device subject to an input periodic signal and a constant force. It is shown that, for this device, we can get current reversals for the current of the electron pairs versus the frequency of the periodic signal and negative conductance for the current of the electron pairs as a function of the constant force.

  9. Electrical conductivity anomalies associated with circular lunar maria

    Science.gov (United States)

    Dyal, P.; Daily, W. D.

    1979-01-01

    A strong anisotropy is observed in magnetic field fluctuations measured by the Lunokhod 2 magnetometer located on the eastern edge of Mare Serenitatis. This anisotropy can be explained by a regional anomaly in the subsurface electrical conductivity distribution associated with the mare similar to the proposed conductivity anomaly associated with Mare Imbrium. The Serenitatis magnetic field anisotropy is compared to the field fluctuation measured by the Apollo 16 magnetometer 1100 km to the south, and this comparison indicates that the subsurface conductivity distribution can be modeled by a nonconducting layer in the lunar lithosphere which is 150 km thick beneath the highlands and 300 km thick beneath Serenitatis. The decrease in electrical conductivity of the upper mantle beneath the mare may result from lower temperatures due to transport of thermal energy and radioactive heat sources to the surface during mare flooding. This proposed anomaly, along with that proposed for Mare Imbrium, strengthens the possibility of regional anomalies in electrical conductivity associated with all circular lunar maria.

  10. Composite yarns of multiwalled carbon nanotubes with metallic electrical conductivity.

    Science.gov (United States)

    Randeniya, Lakshman K; Bendavid, Avi; Martin, Philip J; Tran, Canh-Dung

    2010-08-16

    Unique macrostructures known as spun carbon-nanotube fibers (CNT yarns) can be manufactured from vertically aligned forests of multiwalled carbon nanotubes (MWCNTs). These yarns behave as semiconductors with room-temperature conductivities of about 5 x 10(2) S cm(-1). Their potential use as, for example, microelectrodes in medical implants, wires in microelectronics, or lightweight conductors in the aviation industry has hitherto been hampered by their insufficient electrical conductivity. In this Full Paper, the synthesis of metal-CNT composite yarns, which combine the unique properties of CNT yarns and nanocrystalline metals to obtain a new class of materials with enhanced electrical conductivity, is presented. The synthesis is achieved using a new technique, self-fuelled electrodeposition (SFED), which combines a metal reducing agent and an external circuit for transfer of electrons to the CNT surface, where the deposition of metal nanoparticles takes place. In particular, the Cu-CNT and Au-CNT composite yarns prepared by this method have metal-like electrical conductivities (2-3 x 10(5) S cm(-1)) and are mechanically robust against stringent tape tests. However, the tensile strengths of the composite yarns are 30-50% smaller than that of the unmodified CNT yarn. The SFED technique described here can also be used as a convenient means for the deposition of metal nanoparticles on solid electrode supports, such as conducting glass or carbon black, for catalytic applications.

  11. Observations and parameterization of the stratospheric electrical conductivity

    Science.gov (United States)

    Hu, Hua; Holzworth, Robert H.

    1996-12-01

    Simultaneous in situ measurements of the stratospheric electrical conductivity, made from multiple balloon platforms during the 1992-1993 Extended Life Balloon-Borne Observatories (ELBBO) experiment, have yielded the most comprehensive data set on the stratospheric electrical conductivity. The ELBBO project involved launches of five superpressure balloons into the stratosphere from Dunedin, New Zealand, beginning November 10, 1992, and lasting through March 18, 1993. Most of the balloons floated at a constant altitude of 26 km for over 3 months, covered a wide range of latitudes from the South Pole to 28°S, and circled around the southern hemisphere several times. On average, the positive polar conductivity (conductivity of positive ions alone) was about 15% higher than that of the negative conductivity, suggesting that differences may exist between the mobilities of positive and negative ions. Data from each polarity of polar conductivity also indicate persistent, apparently organized, short-term and localized variations, with amplitude within 30% of the mean value. In corrected geomagnetic (CGM) coordinates the conductivity variations were found to be a function of latitude but not of longitude. The total conductivity can increase 150% from low latitude to high latitude, and does remain nearly constant at latitudes above 55° (namely, the cosmic ray knee latitude). Calculations based on ionization theory demonstrate that the latitudinal variations in the conductivity measurements were mainly due to the latitudinal variations in incident galactic cosmic ray intensity, with only little effect from the air temperature variations. The calculations shown here also suggest that small ions (as opposed to large ions) provide the main contribution to the stratospheric conductivity. The comparisons between conductivity measurements and models show that commonly used models can underestimate the latitudinal variation by a factor of 2. In this paper the stratospheric

  12. Reconstruction of apparent orthotropic conductivity tensor image using magnetic resonance electrical impedance tomography

    Energy Technology Data Exchange (ETDEWEB)

    Sajib, Saurav Z. K.; Kim, Ji Eun; Jeong, Woo Chul; Kim, Hyung Joong; Woo, Eung Je [Department of Biomedical Engineering, Kyung Hee University, Yongin, Gyeonggi (Korea, Republic of); Kwon, Oh In, E-mail: oikwon@konkuk.ac.kr [Department of Mathematics, Konkuk University, Seoul (Korea, Republic of)

    2015-03-14

    Magnetic resonance electrical impedance tomography visualizes current density and/or conductivity distributions inside an electrically conductive object. Injecting currents into the imaging object along at least two different directions, induced magnetic flux density data can be measured using a magnetic resonance imaging scanner. Without rotating the object inside the scanner, we can measure only one component of the magnetic flux density denoted as B{sub z}. Since the biological tissues such as skeletal muscle and brain white matter show strong anisotropic properties, the reconstruction of anisotropic conductivity tensor is indispensable for the accurate observations in the biological systems. In this paper, we propose a direct method to reconstruct an axial apparent orthotropic conductivity tensor by using multiple B{sub z} data subject to multiple injection currents. To investigate the anisotropic conductivity properties, we first recover the internal current density from the measured B{sub z} data. From the recovered internal current density and the curl-free condition of the electric field, we derive an over-determined matrix system for determining the internal absolute orthotropic conductivity tensor. The over-determined matrix system is designed to use a combination of two loops around each pixel. Numerical simulations and phantom experimental results demonstrate that the proposed algorithm stably determines the orthotropic conductivity tensor.

  13. Consequences of electrical conductivity in an orb spider's capture web

    Science.gov (United States)

    Vollrath, Fritz; Edmonds, Donald

    2013-12-01

    The glue-coated and wet capture spiral of the orb web of the garden cross spider Araneus diadematus is suspended between the dry silk radial and web frame threads. Here, we experimentally demonstrate that the capture spiral is electrically conductive because of necks of liquid connecting the droplets even if the thread is stretched. We examine how this conductivity of the capture spiral may lead to entrapment of charged airborne particles such as pollen, spray droplets and even insects. We further describe and model how the conducting spiral will also locally distort the Earth's ambient electric field. Finally, we examine the hypothesis that such distortion could be used by potential prey to detect the presence of a web but conclude that any effect would probably be too small to allow an insect to take evasive action.

  14. Electrical conductivity and dielectric properties of potassium sulfamate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, A.S.; Iype, L.; Rajesh, R. [School of Pure and Applied Physics, Mahatma Gandhi University, Kottayam (India); Varughese, G. [Department of Physics, Catholicate College, Pathanamthitta, Kerala (India); Joseph, G. [Department of Physics, Sacred Heart College, Thevera, Cochin, Kerala (India); Louis, G. [Department of Physics, Cochin University of Science and Technology, Cochin (India)

    2011-10-15

    Single crystals of potassium sulfamate are grown by the method of slow evaporation at constant temperature. AC electrical conductivity of potassium sulfamate is measured in the temperature range 300-430 K and in the frequency region between 100 Hz and 3 MHz along the a, b and c-axes. Complex impedance spectroscopy is used to investigate the frequency response of the electrical properties of the potassium sulfamate single crystal. Temperature variation of AC conductivity and dielectric measurements show a slope change around 345 K for both heating and cooling run and this anomaly is attributed as phase transition, which is well supported by the DSC measurements. Value of loss tangent in the temperature region 330-400 K is found to be very low. Activation energies for the conduction process are calculated along the a, b and c-axes. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  15. Evaluation of electrical transverse conductivity of the unidirectional CFRP

    Science.gov (United States)

    Khebbab, Mohamed; Feliachi, Mouloud; El Hadi Latreche, M.

    2016-01-01

    In this paper, a technique for the calculation of the electrical transverse conductivity of unidirectional carbon fiber reinforced polymer (CFRP), based on Markov chains, is proposed. Inspired by the microscopic cross-sectional structure of CFRP, an electrical percolation system is constructed. The effective transverse conductivity is derived from an equivalent conductance of the percolation network. To achieve such a determination, a notion of escape probability associated to absorbing Markov chains is applied. The obtained results are compared with those given by percolation theory; and also with published experimental data. Our results are shown to be in good agreement with the references. Contribution to the topical issue "Numelec 2015 - Elected submissions", edited by Adel Razek

  16. Modeling Electric Current Flow in 3D Fractured Media

    Science.gov (United States)

    Demirel, S.; Roubinet, D.; Irving, J.

    2014-12-01

    The study of fractured rocks is extremely important in a variety of research fields and applications such as hydrogeology, hydrocarbon extraction and long-term storage of toxic waste. As fractures are highly conductive structures in comparison to the surrounding rock, their presence can be either an advantage or a drawback. For hydrocarbon extraction, fractures allow for quick and easy access to the resource whereas for toxic waste storage their presence increases the risk of leakage and migration of pollutants. In both cases, the identification of fracture network characteristics is an essential step. Recently, we have developed an approach for modeling electric current flow in 2D fractured media. This approach is based on a discrete-dual-porosity model where fractures are represented explicitly, the matrix is coarsely discretized into blocks, and current flow exchange between the fractures and matrix is analytically evaluated at the fracture-scale and integrated at the block-scale [1]. Although this approach has shown much promise and has proven its efficiency for 2D simulations, its extension to 3D remains to be addressed. To this end, we assume that fractures can be represented as two-dimensional finite planes embedded in the surrounding matrix, and we express analytically the distribution of electric potential at the fracture scale. This fracture-scale expression takes into account the electric-current-flow exchange with the surrounding matrix and flow conservation is enforced at the fracture intersections. The fracture-matrix exchange is then integrated at the matrix-block scale where the electric current flow conservation at the block boundaries is formulated with a modified finite volume method. With the objective of providing a low-computational-cost modeling approach adapted to 3D simulations in fractured media, our model is (i) validated and compared to existing modeling approaches and, (ii) used to evaluate the impact of the presence of fractures on

  17. Image theory for electric dipoles above a conducting anisotropic earth

    Science.gov (United States)

    Mahmoud, S. F.

    1984-07-01

    New image representations for vertical electric dipoles (VED) above an imperfectly conducting and axially anisotropic earth are developed. These include multidiscrete images at different depths below the air-earth interface and multipole image sources. It is shown that, in contrast with the available image representations in the literature, the developed ones predict the correct behavior of the fields in the far zone along the earth's surface. Extension to a layered earth's model is made. The theory is also extended to the horizontal electric dipole with similar conclusions to the case of the vertical dipole.

  18. Durable Microstructured Surfaces: Combining Electrical Conductivity with Superoleophobicity.

    Science.gov (United States)

    Pan, Zihe; Wang, Tianchang; Sun, Shaofan; Zhao, Boxin

    2016-01-27

    In this study, electrically conductive and superoleophobic polydimethylsiloxane (PDMS) has been fabricated through embedding Ag flakes (SFs) and Ag nanowires (SNWs) into microstructures of the trichloroperfluorooctylsilane (FDTS)-blended PDMS elastomer. Microstructured PDMS surfaces became conductive at the percolation surface coverage of 3.0 × 10(-2) mg/mm(2) for SFs; the highest conductivity was 1.12 × 10(5) S/m at the SFs surface coverage of 6.0 × 10(-2) mg/mm(2). A significant improvement of the conductivity (increased 3 times at the SNWs fraction of 11%) was achieved by using SNWs to replace some SFs because of the conductive pathways from the formed SNWs networks and its connections with SFs. These conductive fillers bonded strongly with microstructured FDTS-blended PDMS and retained surface properties under the sliding preload of 8.0 N. Stretching tests indicated that the resistance increased with the increasing strains and returned to its original state when the strain was released, showing highly stretchable and reversible electrical properties. Compared with SFs embedded surfaces, the resistances of SFs/SNWs embedded surfaces were less dependent on the strain because of bridging effect of SNWs. The superoleophobicity was achieved by the synergetic effect of surface modification through blending FDTS and the microstructures transferred from sand papers. The research findings demonstrate a simple approach to make the insulating elastomer to have the desired surface oleophobicity and electrical conductivity and help meet the needs for the development of conductive devices with microstructures and multifunctional properties.

  19. Direct current hopping conductance in one-dimensional diagonal disordered systems

    Institute of Scientific and Technical Information of China (English)

    Ma Song-Shan; Xu Hui; Liu Xiao-Liang; Xiao Jian-Rong

    2006-01-01

    Based on a tight-binding disordered model describing a single electron band, we establish a direct current (dc) electronic hopping transport conductance model of one-dimensional diagonal disordered systems, and also derive a dc conductance formula. By calculating the dc conductivity, the relationships between electric field and conductivity and between temperature and conductivity are analysed, and the role played by the degree of disorder in electronic transport is studied. The results indicate the conductivity of systems decreasing with the increase of the degree of disorder, characteristics of negative differential dependence of resistance on temperature at low temperatures in diagonal disordered systems, and the conductivity of systems decreasing with the increase of electric field, featuring the non-Ohm's law conductivity.

  20. EFFECTS OF TRITIUM GAS EXPOSURE ON ELECTRICALLY CONDUCTING POLYMERS

    Energy Technology Data Exchange (ETDEWEB)

    Kane, M.; Clark, E.; Lascola, R.

    2009-12-16

    Effects of beta (tritium) and gamma irradiation on the surface electrical conductivity of two types of conducting polymer films are documented to determine their potential use as a sensing and surveillance device for the tritium facility. It was shown that surface conductivity was significantly reduced by irradiation with both gamma and tritium gas. In order to compare the results from the two radiation sources, an approximate dose equivalence was calculated. The materials were also sensitive to small radiation doses (<10{sup 5} rad), showing that there is a measurable response to relatively small total doses of tritium gas. Spectroscopy was also used to confirm the mechanism by which this sensing device would operate in order to calibrate this sensor for potential use. It was determined that one material (polyaniline) was very sensitive to oxidation while the other material (PEDOT-PSS) was not. However, polyaniline provided the best response as a sensing material, and it is suggested that an oxygen-impermeable, radiation-transparent coating be applied to this material for future device prototype fabrication. A great deal of interest has developed in recent years in the area of conducting polymers due to the high levels of conductivity that can be achieved, some comparable to that of metals [Gerard 2002]. Additionally, the desirable physical and chemical properties of a polymer are retained and can be exploited for various applications, including light emitting diodes (LED), anti-static packaging, electronic coatings, and sensors. The electron transfer mechanism is generally accepted as one of electron 'hopping' through delocalized electrons in the conjugated backbone, although other mechanisms have been proposed based on the type of polymer and dopant [Inzelt 2000, Gerard 2002]. The conducting polymer polyaniline (PANi) is of particular interest because there are extensive studies on the modulation of the conductivity by changing either the oxidation

  1. Numerical Investigation of Entropy Generation in Unsteady MHD Generalized Couette Flow with Variable Electrical Conductivity

    Science.gov (United States)

    Chinyoka, T.; Makinde, O. D.

    2013-01-01

    The thermodynamic second law analysis is utilized to investigate the inherent irreversibility in an unsteady hydromagnetic generalized Couette flow with variable electrical conductivity in the presence of induced electric field. Based on some simplified assumption, the model nonlinear governing equations are obtained and solved numerically using semidiscretization finite difference techniques. Effects of various thermophysical parameters on the fluid velocity, temperature, current density, skin friction, the Nusselt number, entropy generation number, and the Bejan number are presented graphically and discussed quantitatively. PMID:23956691

  2. Using electric current to surpass the microstructure breakup limit

    Science.gov (United States)

    Qin, Rongshan

    2017-01-01

    The elongated droplets and grains can break up into smaller ones. This process is driven by the interfacial free energy minimization, which gives rise to a breakup limit. We demonstrated in this work that the breakup limit can be overpassed drastically by using electric current to interfere. Electric current free energy is dependent on the microstructure configuration. The breakup causes the electric current free energy to reduce in some cases. This compensates the increment of interfacial free energy during breaking up and enables the processing to achieve finer microstructure. With engineering practical electric current parameters, our calculation revealed a significant increment of the obtainable number of particles, showing electric current a powerful microstructure refinement technology. The calculation is validated by our experiments on the breakup of Fe3C-plates in Fe matrix. Furthermore, there is a parameter range that electric current can drive spherical particles to split into smaller ones.

  3. Thermal and Electrical Conductivity Probe for Phoenix Mars Lander

    Science.gov (United States)

    2007-01-01

    NASA's Phoenix Mars Lander will assess how heat and electricity move through Martian soil from one spike or needle to another of a four-spike electronic fork that will be pushed into the soil at different stages of digging by the lander's Robotic Arm. The four-spike tool, called the thermal and electrical conductivity probe, is in the middle-right of this photo, mounted near the end of the arm near the lander's scoop (upper left). In one type of experiment with this tool, a pulse of heat will be put into one spike, and the rate at which the temperature rises on the nearby spike will be recorded, along with the rate at which the heated spike cools. A little bit of ice can make a big difference in how well soil conducts heat. Similarly, soil's electrical conductivity -- also tested with this tool -- is a sensitive indicator of moisture in the soil. This device adapts technology used in soil-moisture gauges for irrigation-control systems. The conductivity probe has an additional role besides soil analysis. It will serve as a hunidity sensor when held in the air.

  4. In vivo human-skin electrical conduction and pain sensations

    Energy Technology Data Exchange (ETDEWEB)

    Voegelin, M. R. [Florence, Univ. (Italy). Div. di Fisica Medica. Dipt. di Fisiopatologia; Paoli, G.; Zoppi, M. [Florence, Univ. (Italy). Istituto della I Clinica Medica

    1997-06-01

    In vivo human skin is stimulated by direct current the intensity of which ranges from 1 {mu}A to 1 mA. They have detected the voltage/current plot and the temporal trend of potential difference between two electrodes placed in a suitable cutaneous region of stimulation, in a group of healthy subjects. They have elaborated a non-linear functional equivalent model to describe the system behaviour. The electrical stimulation can induce painful sensation, over a critical value of the current intensity, and they believe that this sensation is due to thermal dissipation into the inner layers of the skin. In fact, subjects begin to feel pain when the electric power dissipated in the stimulated region for unit time is within the range of 235-260 mcal/cm{sup 2}{center_dot}s, that corresponds to the thermal threshold required to evoke pain.

  5. Electrically conducting nanobiocomposites using carbon nanotubes and collagen waste fibers

    Energy Technology Data Exchange (ETDEWEB)

    Meiyazhagan, Ashokkumar; Thangavel, Saravanamoorthy [Advanced Materials Laboratory, Center for Leather Apparel & Accessories Development, Central Leather Research Institute (Council of Scientific and Industrial Research), Adyar, Chennai 600020 (India); Hashim, Daniel P.; Ajayan, Pulickel M. [Department of Materials Science and NanoEngineering, Rice University, Houston, TX 77005 (United States); Palanisamy, Thanikaivelan, E-mail: thanik8@yahoo.com [Advanced Materials Laboratory, Center for Leather Apparel & Accessories Development, Central Leather Research Institute (Council of Scientific and Industrial Research), Adyar, Chennai 600020 (India)

    2015-05-01

    Electrically conducting hybrid biocomposite films were prepared using a simple and cost-effective method by incorporating different types of carbon nanotubes (XCNTs) viz., few walled carbon nanotube (FWCNT) and boron doped carbon nanotube (BCNT) into biopolymers. Collagen extracted from animal skin wastes was blended with guar gum and XCNTs in varying proportions to form flexible and electrically conducting hybrid films. We found that the electrical conductivity of both types of hybrid films increases radically as the XCNT loading increases. BCNT incorporated hybrid films show better electrical conductivity (3.0 × 10{sup −1} S/cm) than their FWCNT loaded counter parts (4.8 × 10{sup −4} S/cm) at a dosage of 2 wt.%. On the other hand, mechanical and other physical properties such as transparency, flexibility and surface smoothness of the developed hybrid films were affected as a function of XCNT concentration. We also demonstrated that the developed hybrid films lit up a LED lamp when inserted between batteries and the brightness of the emitted light depended on the XCNT loading. These results suggest a new way to transform an industrial biowaste into innovative advanced materials for applications in fields related to biomedicine, biosensors and electronics. - Highlights: • Hybrid nanobiocomposite films prepared using collagen, guar gum and CNTs. • Examined the effect of CNT doping on the properties of hybrid biocomposite films. • Higher CNT loading improved the conductivity radically, especially for BCNT. • The ability of developed hybrid films to lit up a LED lamp was demonstrated. • The results suggest a new way to transform biowaste into advanced materials.

  6. Electrical conductivity of aqueous solutions of aluminum salts

    Science.gov (United States)

    Vila, J.; Rilo, E.; Segade, L.; Cabeza, O.; Varela, L. M.

    2005-03-01

    We present experimental measurements of the specific electrical conductivity (σ) in aqueous solutions of aluminum salts at different temperatures, covering all salt concentrations from saturation to infinite dilution. The salts employed were AlCl3 , AlBr3 , AlI3 , and Al(NO3)3 , which present a 1:3 relationship between the electrical charges of anion and cation. In addition, we have measured the density in all ranges of concentrations of the four aqueous electrolyte solutions at 298.15K . The measured densities show an almost linear behavior with concentration, and we have fitted it to a second order polynomial with very high degree of approximation. The measurement of the specific conductivity at constant temperature reveals the existence of maxima in the conductivity vs concentration curves at molar concentrations around 1.5M for the three halide solutions studied, and at approximately 2M for the nitrate. We present a theoretical foundation for the existence of these maxima, based on the classical Debye-Hückel-Onsager hydrodynamic mean-field framework for electrical transport and its high concentration extensions, and also a brief consideration of ionic frictional coefficients using mode-coupling theory. We also found that the calculated values of the equivalent conductance vary in an approximately linear way with the square root of the concentration at concentrations as high as those where the maximum of σ appears. Finally, and for completeness, we have measured the temperature dependence of the electrical conductivity at selected concentrations from 283to353K , and performed a fit to an exponential equation of the Vogel-Fulcher-Tamman type. The values of the calculated temperatures of null mobility of the four salts are reported.

  7. Reduced Graphene Oxide Films with Ultrahigh Conductivity as Li-Ion Battery Current Collectors.

    Science.gov (United States)

    Chen, Yanan; Fu, Kun; Zhu, Shuze; Luo, Wei; Wang, Yanbin; Li, Yiju; Hitz, Emily; Yao, Yonggang; Dai, Jiaqi; Wan, Jiayu; Danner, Valencia A; Li, Teng; Hu, Liangbing

    2016-06-08

    Solution processed, highly conductive films are extremely attractive for a range of electronic devices, especially for printed macroelectronics. For example, replacing heavy, metal-based current collectors with thin, light, flexible, and highly conductive films will further improve the energy density of such devices. Films with two-dimensional building blocks, such as graphene or reduced graphene oxide (RGO) nanosheets, are particularly promising due to their low percolation threshold with a high aspect ratio, excellent flexibility, and low cost. However, the electrical conductivity of these films is low, typically less than 1000 S/cm. In this work, we for the first time report a RGO film with an electrical conductivity of up to 3112 S/cm. We achieve high conductivity in RGO films through an electrical current-induced annealing process at high temperature of up to 2750 K in less than 1 min of anneal time. We studied in detail the unique Joule heating process at ultrahigh temperature. Through a combination of experimental and computational studies, we investigated the fundamental mechanism behind the formation of a highly conductive three-dimensional structure composed of well-connected RGO layers. The highly conductive RGO film with high direct current conductivity, low thickness (∼4 μm) and low sheet resistance (0.8 Ω/sq.) was used as a lightweight current collector in Li-ion batteries.

  8. Spatial-decomposition analysis of electrical conductivity in ionic liquid.

    Science.gov (United States)

    Tu, Kai-Min; Ishizuka, Ryosuke; Matubayasi, Nobuyuki

    2014-12-28

    The electrical conductivity of room temperature ionic liquid (IL) is investigated with molecular dynamics simulation. A trajectory of 1 μs in total is analyzed for the ionic liquid [C4mim][NTf2] (1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and the anion is also called TFSI or TFSA), and the ion motions are examined in direct connection to the conductivity within the framework formulated previously [K.-M. Tu, R. Ishizuka, and N. Matubayasi, J. Chem. Phys. 141, 044126 (2014)]. As a transport coefficient, the computed electrical conductivity is in fair agreement with the experiment. The conductivity is then decomposed into the autocorrelation term of Nernst-Einstein form and the cross-correlation term describing the two-body motions of ions, and the cross-correlation term is further decomposed spatially to incorporate the structural insights on ion configurations into the dynamic picture. It is observed that the ion-pair contribution to the conductivity is not spatially localized and extends beyond the first coordination shell. The extent of localization of the cross-correlation effect in the conductivity is in correspondence to that of the spatial correlation represented by radial distribution function, which persists over nanometer scale.

  9. In vivo measurements of electrical conductivity of porcine organs at low frequency: new method of measurement.

    Science.gov (United States)

    Spottorno, J; Multigner, M; Rivero, G; Alvarez, L; de la Venta, J; Santos, M

    2012-10-01

    Calculations of the induced currents created in the human body by external electromagnetic fields would be more accurate provided that more realistic experimental values of the electrical properties of the body were available. The purpose of this work is to experimentally obtain values for the conductivity of living organs in conditions close to the real situation. Two-electrode in vivo measurements of the bioimpedance of some porcine organs have been performed. From these measurements and taking into account geometrical considerations, the electrical conductivity for the kidney, liver, heart, and spinal cord has been obtained and were found to be higher than the values reported in the literature. Furthermore, a new experimental procedure is proposed where the conductivity is determined from the values of the electrical potential and currents that are induced by an external electromagnetic field created by a coil placed close to the organ under study.

  10. Synthesis of Conductive Nanofillers/Nanofibers and Electrical Properties of their Conductive Polymer Composites

    Science.gov (United States)

    Sarvi, Ali

    Thanks to their corrosion resistance, light weight, low cost, and ease of processing, electrically conducting polymer composites (CPCs) have received significant attention for the replacement of metals and inorganic materials for sensors, actuators, supercapacitors, and electromagnetic interference (EMI) shields. In this PhD thesis, high aspect ratio conductive nanofillers namely copper nanowires (CuNWs) and multiwall carbon nanotubes (MWCNTs) were coated with polyaniline (PANi) using solution mixing and in-situ polymerization method, respectively. Transmission electron microscopy (TEM) showed a smooth polyaniline nano-coating between 5--18 nm in thickness on the nanofillers' surface. The coating thickness and; consequently, electrical conductivity was controlled and tuned by polyaniline/aniline concentration in solution. Composites with tunable conductivity may be used as chemisensors, electronic pressure sensors and switches. Coated nanofillers demonstrated better dispersion in polystyrene (PS) and provided lower electrical percolation threshold. Dispersion of nanofillers in PS was investigated using rheological measurements and confirmed with electron micrographs and nano-scale images of CPCs. Polyaniline (PANi), when used as a coating layer, was able to attenuate electromagnetic (EM) waves via absorption and store electrical charges though pseudocapacitance mechanism. The dielectric measurements of MWCNT-PANi/PS composites showed one order of magnitude increase in real electrical permittivity compared to that of MWCNT/PS composites making them suitable for charge storage purposes. Incorporation of PANi also brought a new insight into conductive network formation mechanism in electrospun mats where the orientation of conductive high aspect ratio nanofillers is a major problem. Conductive nanofibers of poly(vinylidene fluoride) (PVDF) filled with coated multiwall carbon nanotubes (MWCNTs) were fabricated using electrospinning. These highly oriented PVDF

  11. Electrically Conductive Thick Film Made from Silver Alkylcarbamates

    Science.gov (United States)

    Liu, Jianguo; Li, Xiangyou; Wang, Xiaoye; Zeng, Xiaoyan

    2010-10-01

    A homogeneous electrically conductive silver paste without solid or particle phase was developed using silver alkylcarbamates [(C n H2 n-1NHCOO)2Ag, n ≤ 4] as the precursor of the functional phase. The silver alkylcarbamates were light insensitive and had a low decomposition temperature (below 200°C). The paste was a non-Newtonian fluid with viscosity significantly depending on the content of the thickening agent ethyl cellulose. Array patterns with a resolution of 20 μm were obtained using this paste by a micropen direct-writing method. After the paste with about 48 wt.% silver methylcarbamate [(CH3NHCOO)2Ag] precursor was sintered at 180°C for 15 min, an electrically conductive network consisting of more than 95 wt.% silver was formed, and was found to have a volume electrical resistivity on the order of 10-5 Ω cm and a sheet electrical resistivity on the order of 10-2-10-3 Ω/□. The cohesion strength within the sintered paste and the adhesion strength between the sintered paste layer and the alumina ceramic substrate were tested according to test method B of the American Society for Testing and Materials standard D3359-08. None of the sintered paste layer was detached under the test conditions, and the cohesion and adhesion strengths met the highest grade according to the standard.

  12. The deep lunar electrical conductivity profile - Structural and thermal inferences

    Science.gov (United States)

    Hood, L. L.; Herbert, F.; Sonett, C. P.

    1982-01-01

    Simultaneous lunar surface and orbital magnetometer records are reexamined, to ascertain intervals which may be suitable for measuring lunar inductive response in the solar wind and terrestrial magnetosheath. Power spectral estimates of the response tangent to the lunar surface, defined in terms of transfer and gain functions, are obtained for the 0.0001-0.01 Hz frequency range. The maximum consistency of estimates from different time intervals is found when the initial analysis is limited to the tangential direction of maximum incident power, or that direction in which the ratio of signal to background noise is greatest. Spherically symmetric plasma confinement theory is used in the interpretation of transfer function data, by way of forward model calculations, under the assumption of continuous electrical conductivity increase with depth. Results are presented for internal electrical conductivity profile, metallic core radius, and selenotherm limits.

  13. Fabrication and Microstructure of BN Matrix Composites with Electrical Conductivity

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    BN ceramic is an advanced engineering ceramics with excellent thermal shock resistance, good workability and excellent dielectricity.TiB2 ceramic has excellent electric conductivity,high melting points, and corrosion resistance to molten metal.Therefore,the composite consisting of BN and TiB2 ceramics is expected to have a combination of above-mentioned properties,thereby can be used as self- heating crucible.In this paper,hot pressing technology was used to fabricate the high performance BN-TiB2 composite materials.microstructure and electric conducting mechanism were studied,and the relationship between the microstructure and physical property was discussed.The results show that the microstructure of composites has a great influence on the physical property of composites.The BN-TiB2 composites with excellent mechanical strength and stable resistivity can be obtained by optimizing the processing parameter and controlling the microstructure of composites.

  14. Graphene oxide with improved electrical conductivity for supercapacitor electrodes

    Science.gov (United States)

    Li, Z. J.; Yang, B. C.; Zhang, S. R.; Zhao, C. M.

    2012-02-01

    Predominant few-layer graphene (FLG) sheets of high electrical conductivity have been synthesized by a multi-step intercalation and reduction method. The electrical conductivity of the as-synthesized FLG is measured to be ∼3.2 × 104 S m-1, comparable to that of pristine graphite. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman analysis reveal that the as-synthesized FLG sheets have large areas with single and double layers. The specific capacitance of 180 F g-1 is obtained for the FLG in a 1 M Na2SO4 aqueous electrolyte by integrating the cyclic voltammogram. The good capacitive behavior of the FLG is very promising for the application for next-generation high-performance electrochemical supercapacitors.

  15. Thermal conductivity, viscosity, and electrical conductivity of iron oxide with a cloud fractal structure

    Science.gov (United States)

    Jamilpanah, Pouya; Pahlavanzadeh, Hassan; Kheradmand, Amanj

    2016-09-01

    In the present study, nanoscale iron oxide was synthesized using a hydrothermal method; XRD analysis revealed that all the produced crystals are iron oxide. FESEM microscopic imaging showed that particles are on the scale of nano and their morphology is cloud fractal. To study the laboratory properties of thermal conductivity, viscosity, and electrical conductivity of the nanoparticles, they were dispersed in ethylene glycol-based fluid and the nanofluid was in a two-step synthesis during this process. The experiments were carried out with a weight fraction between 0 and 2 % at temperatures between 25 and 45 °C. According to the results of the experiments, increasing the density of nanoparticles in the fluid increases thermal conductivity, as it was predicted in all theoretical models. On the other hand, nano viscosity increases as the weight fraction increases while it decreases as temperature goes up. Electrical conductivity also increases with raising the temperature and weight fraction. Theoretical models were studied to predict Thermal conductivity, viscosity, and electrical conductivity of the nanofluid.

  16. Thermal conductivity, viscosity, and electrical conductivity of iron oxide with a cloud fractal structure

    Science.gov (United States)

    Jamilpanah, Pouya; Pahlavanzadeh, Hassan; Kheradmand, Amanj

    2017-04-01

    In the present study, nanoscale iron oxide was synthesized using a hydrothermal method; XRD analysis revealed that all the produced crystals are iron oxide. FESEM microscopic imaging showed that particles are on the scale of nano and their morphology is cloud fractal. To study the laboratory properties of thermal conductivity, viscosity, and electrical conductivity of the nanoparticles, they were dispersed in ethylene glycol-based fluid and the nanofluid was in a two-step synthesis during this process. The experiments were carried out with a weight fraction between 0 and 2 % at temperatures between 25 and 45 °C. According to the results of the experiments, increasing the density of nanoparticles in the fluid increases thermal conductivity, as it was predicted in all theoretical models. On the other hand, nano viscosity increases as the weight fraction increases while it decreases as temperature goes up. Electrical conductivity also increases with raising the temperature and weight fraction. Theoretical models were studied to predict Thermal conductivity, viscosity, and electrical conductivity of the nanofluid.

  17. Electrical conductivities and chemical stabilities of mixed conducting pyrochlores for SOFC applications

    DEFF Research Database (Denmark)

    Holtappels, P.; Poulsen, F.W.; Mogensen, Mogens Bjerg

    2000-01-01

    Pyrochlores with praseodymium as the A-site cation and zirconium, tin, cerium and manganese cations on the B-site were prepared in air and their electrical conductivities were investigated as a function of oxygen partial pressure and temperature. Pure Pr2Zr2O7+/-delta as well as samples modified...

  18. Feasibility of Imaging Tissue Electrical Conductivity by Switching Field Gradients with MRI

    Science.gov (United States)

    Gibbs, Eric; Liu, Chunlei

    2016-01-01

    Tissue conductivity is a biophysical marker of tissue structure and physiology. Present methods of measuring tissue conductivity are limited. Electrical impedance tomography, and magnetic resonance electrical impedance tomography rely on passing external current through the object being imaged, which prevents its use in most human imaging. Recently, the RF field used for MR excitation has been used to non-invasively measure tissue conductivity. This technique is promising, but conductivity at higher frequencies is less sensitive to tissue structure. Measuring tissue conductivity non-invasively at low frequencies remains elusive. It has been proposed that eddy currents generated during the rise and decay of gradient pulses could act as a current source to map low-frequency conductivity. This work centers on a gradient echo pulse sequence that uses large gradients prior to excitation to create eddy currents. The electric and magnetic fields during a gradient pulse are simulated by a finite-difference time-domain simulation. The sequence is also tested with a phantom and an animal MRI scanner equipped with gradients of high gradient strengths and slew rate. The simulation demonstrates that eddy currents in materials with conductivity similar to biological tissue decay with a half-life on the order of nanoseconds and any eddy currents generated prior to excitation decay completely before influencing the RF signal. Gradient-induced eddy currents can influence phase accumulation after excitation but the effect is too small to image. The animal scanner images show no measurable phase accumulation. Measuring low-frequency conductivity by gradient-induced eddy currents is presently unfeasible. PMID:26844302

  19. Electrical conductivity of polyaniline doped PVC–PMMA polymer blends

    Indian Academy of Sciences (India)

    S H Deshmukh; D K Burghate; V P Akhare; V S Deogaonkar; P T Deshmukh; M S Deshmukh

    2007-02-01

    The electrical conductivity of polyaniline doped polyvinylchloride (PVC) and poly(methyl methacrylate) (PMMA) thin films has been measured by studying the – characteristics at various temperatures in the range 323–363 K. The results are presented in the form of – characteristics and analysis has been made by interpretation of Poole–Frenkel, Fowler–Nordheim, Schottky ln() vs plots, Richardson and Arrhenius plots. The analysis of these results suggests that Schottky and Richardson mechanisms are primarily responsible for the observed conduction.

  20. Electrical conductivity tensor of dense plasma in magnetic fields

    CERN Document Server

    Harutyunyan, Arus

    2016-01-01

    Electrical conductivity of finite-temperature plasma in neutron star crusts is studied for applications in magneto-hydrodynamical description of compact stars. We solve the Boltzmann kinetic equation in relaxation time approximation taking into account the anisotropy of transport due to the magnetic field, the effects of dynamical screening in the scattering matrix element and corre- lations among the nuclei. We show that conductivity has a minimum at a non-zero temperature, a low-temperature decrease and a power-law increase with increasing temperature. Selected numerical results are shown for matter composed of carbon, iron, and heavier nuclei present in the outer crusts of neutron star.

  1. Understanding Electrical Conduction States in WO3 Thin Films Applied for Resistive Random-Access Memory

    Science.gov (United States)

    Ta, Thi Kieu Hanh; Pham, Kim Ngoc; Dao, Thi Bang Tam; Tran, Dai Lam; Phan, Bach Thang

    2016-05-01

    The electrical conduction and associated resistance switching mechanism of top electrode/WO3/bottom electrode devices [top electrode (TE): Ag, Ti; bottom electrode (BE): Pt, fluorine-doped tin oxide] have been investigated. The direction of switching and switching ability depended on both the top and bottom electrode material. Multiple electrical conduction mechanisms control the leakage current of such switching devices, including trap-controlled space-charge, ballistic, Ohmic, and Fowler-Nordheim tunneling effects. The transition between electrical conduction states is also linked to the switching (SET-RESET) process. This is the first report of ballistic conduction in research into resistive random-access memory. The associated resistive switching mechanisms are also discussed.

  2. ACCELERATED AGING AND ELECTRICAL CONDUCTIVITY TESTS IN CRAMBE SEEDS

    Directory of Open Access Journals (Sweden)

    Juliana Joice Pereira Lima

    2015-02-01

    Full Text Available The aim of this study was to adapt the methodology of the accelerated aging and electrical conductivity tests for determination of physiological potential in crambe seeds. Six seed lots of crambe (cv. FMS Brilhante were subjected to determination of moisture content, germination test, first count germination, emergence, and emergence speed index. For the accelerated aging test, the traditional methodology was used with water, and with a saturated potassium chloride and sodium chloride solution in three periods of exposure (24, 48, and 72 hours at 41°C; the electrical conductivity test was performed with four pre-soaking treatments (0, 2, 4, and 8 hours and four soaking periods (4, 8, 16, and 24 hours at 25°C. The accelerated aging test with water for 72 hours and the electrical conductivity test with 2 hours of pre-soaking and assessment after 16 hours were effective for classification of the crambe seed lots in regard to physiological quality.

  3. State of hydration and electrical conductance of ichthyotic skin

    Directory of Open Access Journals (Sweden)

    Gupta A

    1990-01-01

    Full Text Available Dry skin of twelve subjects suffering from ichthyosis vulgaris and the efficacy of a moisturiser-Cotaryl were quantitatively assessed by measuring the skin surface hydration and high frequency (3.5 MHz electrical conductance of skin. The state of hydration and conductance of ichthyotic skin were 86.9 + 24.6 and 11.0 + 5.7 micro-mho respectively, being much less-compared to 132. 0 + 5.3 and 72.5 + 54.0 micro-mho ofnormal subjects. The moisturiser increased the state of hydration and also the electrical conductance of the stratum corneuni to near-normal values and maintained them as long as the application continued. However, both the hydration and the conductance fell sharply within a week of withrawal of the moisturiser. A moisturiser was thus undoubtedly efficacious in ichthyotic skin, but the effect was only temporary. The state of hydration was found, at all stages, to bear a strong positive correlation (r = 0.69 to 0.80 with the skin conductance.

  4. The Thermal Electrical Conductivity Probe (TECP) for Phoenix

    Science.gov (United States)

    Zent, Aaron P.; Hecht, Michael H.; Cobos, Doug R.; Campbell, Gaylon S.; Campbell, Colin S.; Cardell, Greg; Foote, Marc C.; Wood, Stephen E.; Mehta, Manish

    2009-01-01

    The Thermal and Electrical Conductivity Probe (TECP) is a component of the Microscopy, Electrochemistry, and Conductivity Analyzer (MECA) payload on the Phoenix Lander. TECP will measure the temperature, thermal conductivity and volumetric heat capacity of the regolith. It will also detect and quantify the population of mobile H2O molecules in the regolith, if any, throughout the polar summer, by measuring the electrical conductivity of the regolith, as well as the dielectric permittivity. In the vapor phase, TECP is capable of measuring the atmospheric H2O vapor abundance, as well as augment the wind velocity measurements from the meteorology instrumentation. TECP is mounted near the end of the 2.3 m Robotic Arm, and can be placed either in the regolith material or held aloft in the atmosphere. This paper describes the development and calibration of the TECP. In addition, substantial characterization of the instrument has been conducted to identify behavioral characteristics that might affect landed surface operations. The greatest potential issue identified in characterization tests is the extraordinary sensitivity of the TECP to placement. Small gaps alter the contact between the TECP and regolith, complicating data interpretation. Testing with the Phoenix Robotic Arm identified mitigation techniques that will be implemented during flight. A flight model of the instrument was also field tested in the Antarctic Dry Valleys during the 2007-2008 International Polar year. 2

  5. Conductive network formation of carbon nanotubes in elastic polymer microfibers and its effect on the electrical conductance: Experiment and simulation.

    Science.gov (United States)

    Cho, Hyun Woo; Kim, Sang Won; Kim, Jeongmin; Kim, Un Jeong; Im, Kyuhyun; Park, Jong-Jin; Sung, Bong June

    2016-05-21

    We investigate how the electrical conductance of microfibers (made of polymers and conductive nanofillers) decreases upon uniaxial deformation by performing both experiments and simulations. Even though various elastic conductors have been developed due to promising applications for deformable electronic devices, the mechanism at a molecular level for electrical conductance change has remained elusive. Previous studies proposed that the decrease in electrical conductance would result from changes in either distances or contact numbers between conductive fillers. In this work, we prepare microfibers of single walled carbon nanotubes (SWCNTs)/polyvinyl alcohol composites and investigate the electrical conductance and the orientation of SWCNTs upon uniaxial deformation. We also perform extensive Monte Carlo simulations, which reproduce experimental results for the relative decrease in conductance and the SWCNTs orientation. We investigate the electrical networks of SWCNTs in microfibers and find that the decrease in the electrical conductance upon uniaxial deformation should be attributed to a subtle change in the topological structure of the electrical network.

  6. Vertical coupling between troposphere and lower ionosphere by electric currents and fields at equatorial latitudes

    Science.gov (United States)

    Tonev, P. T.; Velinov, P. I. Y.

    2016-04-01

    Thunderstorms play significant role in the upward electrical coupling between the troposphere and lower ionosphere by quasi-static (QS) electric fields generated by quiet conditions (by slow variations of electric charges), as well as during lightning discharges when they can be strong enough to produce in the nighttime lower ionosphere sprites. Changes are caused in lower ionosphere by the QS electric fields before a sprite-producing lightning discharge which can play role in formation of the stronger sprite-driving transient QS electric fields due to lightning. These changes include electron heating, modifications of conductivity and electron density, etc. We demonstrate that such changes depend on the geomagnetic latitude determining the magnetic field lines inclination, and thus, the anisotropic conductivity. Our previous results show that the QS electric fields in the lower ionosphere above equatorial thunderstorms are much bigger and have larger horizontal extension than those generated at high and middle altitudes by otherwise same conditions. Now we estimate by modeling the electric currents and fields generated in lower ionosphere above equatorial thunderstorms of different horizontal dimensions during quiet periods and of their self-consistent effects to conductivity whose modifications can play role in formation of post-lightning sprite-producing electric fields. Specific electric currents configurations and distributions of related electric fields are estimated first by ambient conductivity. Then, these are evaluated self-consistently with conductivity modification. The electric currents are re-oriented above ~85 km and flow in a narrow horizontal layer where they dense. Respectively, the electric fields and their effect on conductivity have much larger horizontal scale than at middle latitudes (few hundred of kilometers). Horizontally large sources, such as mesoscale convective structures, cause enhancements of electric fields and their effects. These

  7. Direct current electrical stimulation chamber for treating cells in vitro.

    Science.gov (United States)

    Mobini, Sahba; Leppik, Liudmila; Barker, John H

    2016-02-01

    Electrical stimulation has been shown to promote healing and regeneration in skin, bone, muscle, and nerve tissues in clinical studies. Recently, studies applying electrical stimulation to influence cell behavior associated with proliferation, differentiation, and migration have provided a better understanding of the underlying mechanisms of electrical stimulation-based clinical treatments and improved tissue-engineered products through electro-bioreactor technologies. Here, we present a novel device for delivering direct current (DC) electrical stimulation (ES) to cultivated cells in vitro. Our simplified electro-bioreactor is customized for applying DC electrical current simultaneously in six individual tissue culture wells. The design overcomes previous experimental replicate limitations, thus reducing experimental time and cost.

  8. The role of the salt electrolyte on the electrical conductive properties of a polymeric bipolar membrane

    NARCIS (Netherlands)

    Alcaraz, Antonio; Wilhelm, Friedrich G.; Wessling, Matthias; Ramirez, Patricio

    2001-01-01

    We have studied the contribution of the salt electrolyte to the electrical conductive characteristics of a bipolar membrane. We present first a critical analysis of previous theoretical approaches, and discuss the limits of validity. Experimental current-voltage curves of several commercial bipolar

  9. Current-induced surface roughness reduction in conducting thin films

    Science.gov (United States)

    Du, Lin; Maroudas, Dimitrios

    2017-03-01

    Thin film surface roughness is responsible for various materials reliability problems in microelectronics and nanofabrication technologies, which requires the development of surface roughness reduction strategies. Toward this end, we report modeling results that establish the electrical surface treatment of conducting thin films as a physical processing strategy for surface roughness reduction. We develop a continuum model of surface morphological evolution that accounts for the residual stress in the film, surface diffusional anisotropy and film texture, film's wetting of the layer that is deposited on, and surface electromigration. Supported by linear stability theory, self-consistent dynamical simulations based on the model demonstrate that the action over several hours of a sufficiently strong and properly directed electric field on a conducting thin film can reduce its surface roughness and lead to a smooth planar film surface. The modeling predictions are in agreement with experimental measurements on copper thin films deposited on silicon nitride layers.

  10. Electrical conductivity measurements in sewage sludge pellets: innovative techniques for environmental management.

    Science.gov (United States)

    Camilla, S; Jordan, M M

    2009-09-15

    This paper presents research on the behaviour of electrical conductivity of sludge pellets resulting from the treatment of urban wastewater at the drying grounds of the El Trebal wastewater processing plant, located in the Mapocho river basin of the Metropolitana Region, Santiago, Chile. In the methodology used samples were taken that correspond to three horizons of the sewage sludge pile. The first horizon made up the upper portion of the pile (the surface), the second the central portion (mesophilous), and the third the lower one (thermophilous). Electrical conductivity measurements were taken in sewage sludge pellets under pressures on the order of 15-50 MPa with currents of 10(-15)A. Electrical conductivity measurements were also taken for different horizons, and innovative techniques and methodologies for sludge samples presented in the form of pellets are used for this purpose. Such pellets are easily reproduced with sufficient precision, and at the same time allow modifying other variables like mass, sample dimensions and compaction levels. The trends of the conductivity curves are similar for the sludge from the isolation surface horizon (H1) as well as for the mesophilous area horizon (H2). In the case of the thermophilous area horizon (H3), the electrical conductivity shows extremely high values when compared to horizons H1 and H2. This paper could be useful in establishing a general rule for taking electrical conductivity measurements in sewage sludge samples. Such a rule could bring accurate reproducible values, and be used for other types of dry wastes.

  11. Mapping of GeSbTe Thin Film Electrical Properties with Conductive AFM

    Science.gov (United States)

    Brocious, Jordan; Inglefield, Colin; Bobela, David; Herring, Thomas; Taylor, P. Craig

    2007-10-01

    The phase-change material system GeSbTe (GST) is currently used for optical data storage, however many details of the mechanism governing the phase change are not understood. GST's optical properties and electrical conductivities differ between the amorphous and crystalline phases. For instance, the electrical conductivity in the amorphous phase can be ˜10^3 times smaller than electrical conductivity in the crystalline phase. Thin films of Ge2Sb2Te5 and other alloys were created by a RF sputtering technique, which is known to produce amorphous samples. Crystalline regions were created after growth by localized laser heating. We characterized these films with Conductive Atomic Force Microscopy, which provides physical and electrical topography images. From this characterization we have identified sparse ˜100 nm highly conductive regions in the overall low-conductivity amorphous material. Although the laser treatment does not result in a uniformly conductive film, conductive regions in the treated material are significantly denser and larger.

  12. Spin Coulomb Dragging Inhibition of Spin-Polarized Electric Current Injecting into Organic Semiconductors

    Institute of Scientific and Technical Information of China (English)

    ZHAO Jun-Qing; QIAO Shi-Zhu; JIA Zhen-Feng; ZHANG Ning-Yu; JI Yan-Ju; PANG Yan-Tao; CHEN Ying; FU Gang

    2008-01-01

    @@ We introduce a one-dimensional spin injection structure comprising a ferromagnetic metal and a nondegenerate organic semiconductor to model electric current polarizations.With this model we analyse spin Coulomb dragging (SCD) effects on the polarization under various electric fields, interface and conductivity conditions.The results show that the SCD inhibits the current polarization.Thus the SCD inhibition should be well considered for accurate evaluation of current polarization in the design of organic spin devices.

  13. Electrically conductive gold- and copper-metallized DNA origami nanostructures.

    Science.gov (United States)

    Geng, Yanli; Pearson, Anthony C; Gates, Elisabeth P; Uprety, Bibek; Davis, Robert C; Harb, John N; Woolley, Adam T

    2013-03-12

    This work demonstrates the use of a circuit-like DNA origami structure as a template to fabricate conductive gold and copper nanostructures on Si surfaces. We improved over previous results by using multiple Pd seeding steps to increase seed uniformity and density. Our process has also been characterized through atomic force microscopy, particle size distribution analysis, and scanning electron microscopy. We found that four successive Pd seeding steps yielded the best results for electroless metal plating on DNA origami. Electrical resistance measurements were done on both Au- and Cu-metallized nanostructures, with each showing ohmic behavior. Gold-plated DNA origami structures made under optimal conditions had an average resistivity of 7.0 × 10(-5) Ω·m, whereas copper-metallized structures had a resistivity as low as 3.6 × 10(-4) Ω·m. Importantly, this is the first demonstration of electrically conductive Cu nanostructures fabricated on either DNA or DNA origami templates. Although resistivities for both gold and copper samples were larger than those of the bulk metal, these metal nanostructures have the potential for use in electrically connecting small structures. In addition, these metallized objects might find use in surface-enhanced Raman scattering experiments.

  14. Ion Pair in Extreme Aqueous Environments, Molecular-Based and Electric Conductance Approaches

    Energy Technology Data Exchange (ETDEWEB)

    Chialvo, Ariel A [ORNL; Gruszkiewicz, Miroslaw {Mirek} S [ORNL; Simonson, J Michael {Mike} [ORNL; Palmer, Donald [ORNL; Cole, David R [ORNL

    2009-01-01

    We determine by molecular-based simulation the density profiles of the Na+!Cl! ion-pair association constant in steam environments along three supercritical isotherms to interrogate the behavior of ion speciation in dilute aqueous solutions at extreme conditions. Moreover, we describe a new ultra-sensitive flow-through electric conductance apparatus designed to bridge the gap between the currently lowest steam-density conditions at which we are experimentally able to attain electric conductance measurements and the theoretically-reachable zero-density limit. Finally, we highlight important modeling challenges encountered near the zero-density limit and discuss ways to overcome them.

  15. In vivo electrical conductivity measurements during and after tumor electroporation: conductivity changes reflect the treatment outcome.

    Science.gov (United States)

    Ivorra, Antoni; Al-Sakere, Bassim; Rubinsky, Boris; Mir, Lluis M

    2009-10-01

    Electroporation is the phenomenon in which cell membrane permeability is increased by exposing the cell to short high-electric-field pulses. Reversible electroporation treatments are used in vivo for gene therapy and drug therapy while irreversible electroporation is used for tissue ablation. Tissue conductivity changes induced by electroporation could provide real-time feedback of the treatment outcome. Here we describe the results from a study in which fibrosarcomas (n = 39) inoculated in mice were treated according to different electroporation protocols, some of them known to cause irreversible damage. Conductivity was measured before, within the pulses, in between the pulses and for up to 30 min after treatment. Conductivity increased pulse after pulse. Depending on the applied electroporation protocol, the conductivity increase after treatment ranged from 10% to 180%. The most significant conclusion from this study is the fact that post-treatment conductivity seems to be correlated with treatment outcome in terms of reversibility.

  16. Electrical Conductivity of Metals: A New Look at this Subject

    Directory of Open Access Journals (Sweden)

    Silva P. R.

    2014-04-01

    Full Text Available Various parameters tied to the electrical conductivity of typical metals are estimated and are expressed in terms of universal constants. It happen s that they are close to those found in metallic copper at room temperature. The fact that the realization of the model occurs at room temperature is explained by using th e Landauer’s erasure principle. The averaged collision time of the electron of conduction is also thought as a particle lifetime. Finally an analogy is established between the motion of the electron of conduction and the cosmological constant problem, where a spherical surface of radius equal to the electron mean free path has been thought as a surf ace horizon for the charge carriers.

  17. Measurements of middle-atmosphere electric fields and associated electrical conductivities

    Science.gov (United States)

    Hale, L. C.; Croskey, C. L.; Mitchell, J. D.

    1981-01-01

    A simple antenna for measuring the vertical electric field in the 'middle atmosphere' has been flown on a number of rocket-launched parachute-borne payloads. The data from the first nine such flights, launched under a variety of geophysical conditions, are presented, along with electrical conductivities measured simultaneously. The data include indications of layered peaks of several volts per meter in the mesospheric field at high and low latitudes in situations of relatively low conductivity. During an auroral 'REP' event the electric field reversed direction in the lower stratosphere, accompanied by a substantial enhancement in conductivity. The data generally do not confirm speculations based only on the extension of the thunderstorm circuit from below or the mapping of ionospheric and magnetospheric fields from above, but seem to require, in addition, internal generation processes in the middle atmosphere.

  18. Tribological behavior and wear mechanism of resin-matrix contact strip against copper with electrical current

    Institute of Scientific and Technical Information of China (English)

    TU Chuan-jun; CHEN Zhen-hua; CHEN Ding; YAN Hong-ge; HE Feng-yi

    2008-01-01

    The resin-matrix pantograph contact strip (RMPCS), which has excellent abrasion resistance with electrical current and friction-reducing function, was developed in view of the traditional contact strips with high maintenance cost, high wear rate with electrical current and severe damage to the copper conducting wire. The characteristics of worn surfaces, cross-section and typical elemental distributions of RMPCS were studied by scanning electron microscopy (SEM) and energy dispersion spectrometry (EDS).The wear behavior and arc discharge of RMPCS against copper were investigated with self-made electrical wear tester. The results show that the electrical current plays a critical role in determining the wear behavior, and the wear rate of the RMPCS against copper with electrical current is 2.7-5.8 times higher than the value without electrical current. The wear rate of the contact strip increases with the increase of the sliding speed and electrical current density. The main wear mechanism of RMPCS against copper without electrical current is low stress grain abrasive and slightly adhesive wear, while arc erosion wear and oxidation wear are the dominate mechanism with electrical current, which is accompanied by adhesive wear during the process of wear.

  19. A method to derive maps of ionospheric conductances, currents, and convection from the Swarm multisatellite mission

    DEFF Research Database (Denmark)

    Amm, O.; Vanhamäki, H.; Kauristie, K.

    2015-01-01

    , currents, and electric field in the area between the trajectories of the two lower spacecraft, and even to some extent outside of it. This technique is based on Spherical Elementary Current Systems. We present test cases of modeled situations from which we calculate virtual Swarm data and show...... that the technique is able to reconstruct the model electric field, horizontal currents, and conductances with a very good accuracy. Larger errors arise for the reconstruction of the 2-D field-aligned currents (FAC), especially in the area outside of the spacecraft orbits. However, even in this case the general...... pattern of FAC is recovered, and the magnitudes are valid in an integrated sense. Finally, using an MHD model run, we show how our technique allows estimation of the ionosphere-magnetosphere coupling parameter K, if conjugate observations of the magnetospheric magnetic and electric field are available...

  20. Improved Electrical Conductivity of Carbon/Polyvinyl Alcohol Electrospun Nanofibers

    Directory of Open Access Journals (Sweden)

    Nader Shehata

    2015-01-01

    Full Text Available Carbon nanofibers (CNFs gained much interest in the last few years due to their promising electrical, chemical, and mechanical characteristics. This paper investigates a new nanocomposite composed of carbon nanofibers hosted by PVA and both are integrated in one electrospun nanofibers web. This technique shows a simple and cheap way to offer a host for CNFs using traditional deposition techniques. The results show that electrical conductivity of the formed nanofibers has been improved up to 1.63 × 10−4 S/cm for CNFs of weight 2%. The peak temperature of mass loss through TGA measurements has been reduced by 2.3%. SEM images show the homogeneity of the formed PVA and carbon nanofibers in one web, with stretched CNFs after the electrospinning process. The formed nanocomposite can be used in wide variety of applications including nanoelectronics and gas adsorption.

  1. MHD rotation of electrically conducting media in crossed fields

    Energy Technology Data Exchange (ETDEWEB)

    Nikitin, N.V.

    1978-01-01

    A nonlinear scheme is developed for calculating the hydrodynamic characteristics of MHD flow in a cylindrical vessel of finite dimensions, in an electric field and a magnetic field crossing each other. The incompressible fluid is assumed to have a constant viscosity and electrical conductivity. The solution to the complete system of MHD equations is expanded in a series with respect to the magnetic Reynolds number, for a large hydrodynamic Reynolds number. And rather simple engineering formulas for calculating the velocity field and the pressure field are derived by the Karman-Pohlhausen method of integral relations. The results are compared with experimental data pertaining to a model helium-xenon discharge chamber with distribution of the Lorentz force causing the plasma to rotate as a quasi-solid. 15 references, 5 figures, 1 table.

  2. NONLINEAR CURRENT-VOLTAGE CHARACTERISTICS OF CONDUCTIVE POLYETHYLENE COMPOSITES WITH CARBON BLACK FILLED PET MICROFIBRILS

    Institute of Scientific and Technical Information of China (English)

    Qian-ying Chen; Jing Gao; Kun Dai; Huan Pang; Jia-zhuang Xu; Jian-hua Tang; Zhong-ming Li

    2013-01-01

    Current-voltage electrical behavior of in situ microfibrillar carbon black (CB)/poly(ethylene terephthalate)(PET)/polyethylene (PE) (m-CB/PET/PE) composites with various CB concentrations at ambient temperatures was studied under a direct-current electric field.The current-voltage (Ⅰ-Ⅴ) curves exhibited nonlinearity beyond a critical value of voltage.The dynamic random resistor network (DRRN) model was adopted to semi-qualitatively explain the nonlinear conduction behavior of m-CB/PET/PE composites.Macroscopic nonlinearity originated from the interracial interactions between CB/PET micro fibrils and additional conduction channels.Combined with the special conductive networks,an illustration was proposed to interpret the nonlinear Ⅰ-Ⅴ characteristics by a field emission or tunneling mechanism between CB particles in the CB/PET microfibers intersections.

  3. Analysis of in-situ electrical conductivity data from the HFIR TRIST-ER1 experiment

    Energy Technology Data Exchange (ETDEWEB)

    Zinkle, S.J.; Snead, L.L. [Oak Ridge National Lab., TN (United States); Shikama, T. [Tohoku Univ. (Japan)] [and others

    1997-08-01

    The current vs. applied voltage data generated from the HFIR TRIST-ER1 experiment have been analyzed to determine the electrical conductivity of the 15 aluminum oxide specimens and the MgO-insulated electrical cables as a function of irradiation dose. With the exception of the 0.05%Cr-doped sapphire (ruby) specimen, the electrical conductivity of the alumina specimens remained at the expected radiation induced conductivity (RIC) level of <10{sup -6} S/m during full-power reactor irradiation (10-16 kGy/s) at 450-500{degrees}C up to a maximum dose of {approximately}3 dpa. The ruby specimen showed a rapid initial increase in conductivity to {approximately}2 x 10{sup -4} S/m after {approximately}0.1 dpa, followed by a gradual decrease to <1 x 10{sup -6} S/m after 2 dpa. Nonohmic electrical behavior was observed in all of the specimens, and was attributed to preferential attraction of ionized electrons in the capsule gas to the unshielded low-side bare electrical leads emanating from the subcapsules. The electrical conductivity was determined from the slope of the specimen current vs. voltage curve at negative voltages, where the gas ionization effect was minimized. Dielectric breakdown tests performed on unirradiated mineral-insulated coaxial cables identical to those used in the high voltage coaxial cables during the 3-month irradiation is attributable to thermal dielectric breakdown in the glass seals at the end of the cables, as opposed to a radiation-induced electrical degradation (RIED) effect.

  4. Development of electrically conductive-superoleophobic micropillars for reducing surface adhesion of oil at low temperatures

    Science.gov (United States)

    Pan, Zihe; Wang, Tianchang; Zhou, Yikang; Zhao, Boxin

    2016-12-01

    Electrically conductive and superoleophobic micropillars have been developed through the construction of biomimetic micropillars using Ag-filled epoxy composites and the incorporation of FDTS on the micropillar surface. These micropillars are found to be superoleophobic with an oil contact angle of 140°, demonstrating excellent self-cleaning properties. The conductivity of micropillars allows for the Joule-heating effect to actively reduce the adhesion and even unfreeze the frozen oil droplets by passing electrical current. Electrical resistance of the composite micropillars was modulated by two orders of magnitudes by varying the contents of Ag flakes from 45 wt% to 65 wt%. The effectiveness of conductive micropillars for surface un-freezing was investigated by applying DC current to decrease the adhesion strength of frozen oil droplets on surfaces. The results showed a pronounced reduction of frozen oil adhesion force by 60% when the resistance increased from 7.5 Ω to 877 Ω after applying DC current for 2 min. By continuously applying DC current for 3 min, the frozen oil adhesion decreased to 0.05 N, reaching zero when the surface was heated up to -10 °C after applying DC current for 5 min. In contrast, when the droplet was heated up to -5 °C by hot air, there is still a substantial force of adhesion. The research findings demonstrate the use of constructing conductive-superoleophobic composite micropillars at surface for eliminating the frozen oil from surfaces at low temperatures.

  5. Defect detection in conducting materials using eddy current testing techniques

    Directory of Open Access Journals (Sweden)

    Brauer Hartmut

    2014-01-01

    Full Text Available Lorentz force eddy current testing (LET is a novel nondestructive testing technique which can be applied preferably to the identification of internal defects in nonmagnetic moving conductors. The LET is compared (similar testing conditions with the classical eddy current testing (ECT. Numerical FEM simulations have been performed to analyze the measurements as well as the identification of internal defects in nonmagnetic conductors. The results are compared with measurements to test the feasibility of defect identification. Finally, the use of LET measurements to estimate of the electrical conductors under test are described as well.

  6. Electrical Conductivity Mechanism in Unconventional Lead Vanadate Glasses

    Science.gov (United States)

    Abdel-Wahab, F.; Merazga, A.; Montaser, A. A.

    2016-12-01

    Lead vanadate glasses of the system (V2O5)_{1-x}(PbO)x with x = 0.4 , 0.45, 0.5, 0.55, 0.6 have been prepared by the press-quenching technique. The dc (σ (0) ) and ac (σ (ω )) electrical conductivities were measured in the temperature range from 150 to 420 K and the frequency range from 102 to 106 Hz. The electrical properties are shown to be sensitive to composition. The experimental results have been analyzed within the framework of different models. The dc conductivity is found to be proportional to Tp with the exponent p ranging from 8.2 to 9.8, suggesting that the transport is determined by a multi-phonon process of weak electron-lattice coupling. The ac conductivity is explained by the percolation path approximation (PPA). In this model, σ (ω ) is closely related to the σ (0) and fitting the experimental data produces a dielectric relaxation time τ in good agreement with the expected value in both magnitude and temperature dependence.

  7. Multifunctional conducting fibres with electrically controlled release of ciprofloxacin.

    Science.gov (United States)

    Esrafilzadeh, Dorna; Razal, Joselito M; Moulton, Simon E; Stewart, Elise M; Wallace, Gordon G

    2013-08-10

    We hereby present a new method of producing coaxial conducting polymer fibres loaded with an antibiotic drug that can then be subsequently released (or sustained) in response to electrical stimulation. The method involves wet-spinning of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) fibre, which served as the inner core to the electropolymerised outer shell layer of polypyrrole (Ppy). Ciprofloxacin hydrochloride (Cipro) was selected as the model drug and as the dopant in the Ppy synthesis. The release of Cipro in phosphate buffered saline (PBS) from the fibres was controlled by switching the redox state of Ppy.Cipro layer. Released Cipro under passive and stimulated conditions were tested against Gram positive (Streptococcus pyogenes) and Gram negative (Escherichia coli) bacteria. Significant inhibition of bacterial growth was observed against both strains tested. These results confirm that Cipro retains antibacterial properties during fibre fabrication and electrochemically controlled release. In vitro cytotoxicity testing utilising the neural B35 cell line confirmed the cytocompatibility of the drug loaded conducting fibres. Electrical conductivity, cytocompatibility and tuning release profile from this flexible fibre can lead to promising bionic applications such as neuroprosthetics and localised drug delivery. Copyright © 2013 Elsevier B.V. All rights reserved.

  8. Electrical conductivity of warm neutron star crust in magnetic fields

    CERN Document Server

    Harutyunyan, Arus

    2016-01-01

    We study the electrical conductivity of finite-temperature crust of a warm compact star which may be formed in the aftermath of a supernova explosion or a binary neutron star merger as well as when a cold neutron star is heated by accretion of material from a companion. We focus on the temperature-density regime where plasma is in the liquid state and, therefore, the conductivity is dominated by the electron scattering off correlated nuclei. The dynamical screening of this interaction is implemented in terms of polarization tensor computed in the hard-thermal-loop effective field theory of QED plasma. The correlations of the background ionic component are accounted for via a structure factor derived from Monte-Carlo simulations of one-component-plasma. With this input we solve the Boltzmann kinetic equation in relaxation time approximation taking into account the anisotropy of transport due to the magnetic field. The electrical conductivity tensor is studied numerically as a function of temperature and densit...

  9. Electrical Conductivity Mechanism in Unconventional Lead Vanadate Glasses

    Science.gov (United States)

    Abdel-Wahab, F.; Merazga, A.; Montaser, A. A.

    2017-03-01

    Lead vanadate glasses of the system (V2O5)_{1-x}(PbO)x with x = 0.4, 0.45, 0.5, 0.55, 0.6 have been prepared by the press-quenching technique. The dc (σ (0)) and ac (σ (ω )) electrical conductivities were measured in the temperature range from 150 to 420 K and the frequency range from 102 to 106 Hz. The electrical properties are shown to be sensitive to composition. The experimental results have been analyzed within the framework of different models. The dc conductivity is found to be proportional to Tp with the exponent p ranging from 8.2 to 9.8, suggesting that the transport is determined by a multi-phonon process of weak electron-lattice coupling. The ac conductivity is explained by the percolation path approximation (PPA). In this model, σ (ω ) is closely related to the σ (0) and fitting the experimental data produces a dielectric relaxation time τ in good agreement with the expected value in both magnitude and temperature dependence.

  10. The Electrical Conductivity of Gabbro at High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The electric conductivity of gabbro has been measured at 1.0-2.0 Gpa and 320-700℃,and the conduction mechanism has been analyzed in terms of the impedance spectra.Experimental results indicated that the electric conductivity depends on the frequency of alter-native current.Impedance arcs representing the conduction mechanism of grain interiors are displayed in the complex impedance plane ,and the mechanism is dominated at high pressure.These arcs occur over the range of 102-k×105Hz(k is the positive integer from 1 to 9) .On the basis of our results and previous work,it is concluded that gabbro cannot form any high conductivity layer (HCL) in the middle-lower crust.

  11. The Electrical Conductivity of Gabbro at High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    王多君; 李和平; 易丽; 张卫刚; 刘丛强; 苏根利; 丁东业

    2002-01-01

    The electric conductivity of gabbro has been measured at 1.0 - 2.0 GPa and 320-700℃, and the conduction mechanism has been analyzed in terms of the impedance spectra.Experimental results indicated that the electric conductivity depends on the frequency of alternative current. Impedance arcs representing the conduction mechanism of grain interiors are displayed in the complex impedance plane, and the mechanism is dominated at high pressure.These arcs occur over the range of 102 - k× 105 Hz (k is the positive integer from 1 to 9). On the basis of our results and previous work, it is concluded that gabbro cannot form any high conductivity layer (HCL) in the middle-lower crust.

  12. The electrical conductivities of candidate beam-waveguide antenna shroud materials

    Science.gov (United States)

    Otoshi, T. Y.; Franco, M. M.

    1994-01-01

    The shroud on the beam-waveguide (BWG) antenna at DSS 13 is made from highly magnetic American Society for Testing and Materials (ASTM) A36 steel. Measurements at 8.42 GHz showed that this material (with paint) has a very poor electrical conductivity that is 600 times worse than aluminum. In cases where the BWG mirrors might be slightly misaligned, unintentional illumination and poor electrical conductivity of the shroud walls can cause system noise temperature to be increased significantly. This potential increase of noise temperature contribution can be reduced through the use of better conductivity materials for the shroud walls. An alternative is to attempt to improve the conductivity of the currently used ASTM A36 steel by means of some type of plating, surface treatment, or high-conductivity paints. This article presents the results of a study made to find improved materials for future shrouds and mirror supports.

  13. Gas-Tolerant Device Senses Electrical Conductivity of Liquid

    Science.gov (United States)

    O'Connor, Edward W.

    2005-01-01

    The figure depicts a device for measuring the electrical conductivity of a flowing liquid. Unlike prior such devices, this one does not trap gas bubbles entrained in the liquid. Usually, the electrical conductivity of a liquid is measured by use of two electrodes immersed in the liquid. A typical prior device based on this concept contains large cavities that can trap gas. Any gas present between or near the electrodes causes a significant offset in the conductivity reading and, if the gas becomes trapped, then the offset persists. Extensive tests on two-phase (liquid/ gas) flow have shown that in the case of liquid flowing along a section of tubing, gas entrained in the liquid is not trapped in the section as long as the inner wall of the section is smooth and continuous, and the section is the narrowest tubing section along the flow path. The design of the device is based on the foregoing observation: The electrodes and the insulators separating the electrodes constitute adjacent parts of the walls of a tube. The bore of the tube is machined to make the wall smooth and to provide a straight flow path from the inlet to the outlet. The diameter of the electrode/insulator tube assembly is less than the diameter of the inlet or outlet tubing. An outer shell contains the electrodes and insulators and constitutes a leak and pressure barrier. Any gas bubble flowing through this device causes only a momentary conductivity offset that is filtered out by software used to process the conductivity readings.

  14. Reducing current reversal time in electric motor control

    Science.gov (United States)

    Bredemann, Michael V

    2014-11-04

    The time required to reverse current flow in an electric motor is reduced by exploiting inductive current that persists in the motor when power is temporarily removed. Energy associated with this inductive current is used to initiate reverse current flow in the motor.

  15. Ionic conductivity, structural deformation, and programmable anisotropy of DNA origami in electric field.

    Science.gov (United States)

    Li, Chen-Yu; Hemmig, Elisa A; Kong, Jinglin; Yoo, Jejoong; Hernández-Ainsa, Silvia; Keyser, Ulrich F; Aksimentiev, Aleksei

    2015-02-24

    The DNA origami technique can enable functionalization of inorganic structures for single-molecule electric current recordings. Experiments have shown that several layers of DNA molecules, a DNA origami plate, placed on top of a solid-state nanopore is permeable to ions. Here, we report a comprehensive characterization of the ionic conductivity of DNA origami plates by means of all-atom molecular dynamics (MD) simulations and nanocapillary electric current recordings. Using the MD method, we characterize the ionic conductivity of several origami constructs, revealing the local distribution of ions, the distribution of the electrostatic potential and contribution of different molecular species to the current. The simulations determine the dependence of the ionic conductivity on the applied voltage, the number of DNA layers, the nucleotide content and the lattice type of the plates. We demonstrate that increasing the concentration of Mg(2+) ions makes the origami plates more compact, reducing their conductivity. The conductance of a DNA origami plate on top of a solid-state nanopore is determined by the two competing effects: bending of the DNA origami plate that reduces the current and separation of the DNA origami layers that increases the current. The latter is produced by the electro-osmotic flow and is reversible at the time scale of a hundred nanoseconds. The conductance of a DNA origami object is found to depend on its orientation, reaching maximum when the electric field aligns with the direction of the DNA helices. Our work demonstrates feasibility of programming the electrical properties of a self-assembled nanoscale object using DNA.

  16. The electrical conductivity and longitudinal magnetoresistance of metallic nanotubes

    Science.gov (United States)

    Moraga, Luis; Henriquez, Ricardo; Bravo, Sergio; Solis, Basilio

    2017-03-01

    Proceeding from exact solutions of the Boltzmann transport equation in the relaxation time approximation, we present formulas for the electrical conductivity and longitudinal magnetoresistance of single-crystalline cylindrical nanotubes. The effects of surface scattering are taken into account by introducing different specularity parameters at the inner and outer surfaces. For small values of the inner diameter, these formulas reduce to the respective expressions for cylindrical nanowires. It is found that the existing measurements of the resistivity of nanotubes (Venkata Kamalakar and Raychaudhuri, New J. Phys. 14, 043032 (2012)) can be accurately described by this formalism.

  17. HYDROMAGNETIC DIVERGENT CHANNEL FLOW OF A VISCOELASTIC ELECTRICALLY CONDUCTING FLUID

    Directory of Open Access Journals (Sweden)

    RITA CHOUDHURY

    2011-10-01

    Full Text Available A theoretical study for the two-dimensional boundary layer flow through a divergent channel of a visco-elastic electrically conducting fluid in presence of transverse magnetic field has been considered. Similarity solutions are obtained by considering a special form of magnetic field. The analytical expressions for velocity and skin friction at the wall have been obtained and numerically worked out for different values of the flow parametersinvolved in the solution. The velocity and the skin friction coefficient have been presented graphically to observe the visco-elastic effects for various values of the flow parameters across the boundary layer.

  18. The electrical conductivity and longitudinal magnetoresistance of metallic nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Moraga, Luis, E-mail: luismoragajaramillo@gmail.com [Universidad Central de Chile, Toesca 1783, Santiago 8370178 (Chile); Henriquez, Ricardo, E-mail: rahc.78@gmail.com [Departamento de Física, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso (Chile); Bravo, Sergio, E-mail: bravo.castillo.sergio@gmail.com [Departamento de Física, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso (Chile); Solis, Basilio, E-mail: bsolis1984@gmail.com [Argelander-Institut für Astronomie, Auf dem Hügel 71, 53121 Bonn (Germany)

    2017-03-01

    Proceeding from exact solutions of the Boltzmann transport equation in the relaxation time approximation, we present formulas for the electrical conductivity and longitudinal magnetoresistance of single-crystalline cylindrical nanotubes. The effects of surface scattering are taken into account by introducing different specularity parameters at the inner and outer surfaces. For small values of the inner diameter, these formulas reduce to the respective expressions for cylindrical nanowires. It is found that the existing measurements of the resistivity of nanotubes (Venkata Kamalakar and Raychaudhuri, New J. Phys. 14, 043032 (2012)) can be accurately described by this formalism.

  19. Electrical conduction in some inclusion compounds of iodine

    Energy Technology Data Exchange (ETDEWEB)

    Oza, A.T. (Sardar Patel Univ., Vallabh Vidyanagar (India). Dept. of Physics)

    1983-12-16

    The electrical resistivities of three organic polyiodide chain complexes, namely ..cap alpha..-cyclodextrin-KI-I/sub 2/ x 4 H/sub 2/O, amylose-iodine, and (coumarin)/sub 4/-KI-I/sub 2/ are found to increase at high pressures up to 80 kbar. The increase in the resistivities at high pressures and the Arrhenius-type temperature dependence of resistivities can be explained only with trap limited conduction. The effect of trapping is enhanced at high pressures. Pressure increases either the density of traps or their depth or both.

  20. Weak discontinuities in electrically conducting and radiating gases

    Directory of Open Access Journals (Sweden)

    Rai A.

    2002-01-01

    Full Text Available The singular surface theory has been used to determine the law of propagation of weak discontinuities and the problem of growth and decay of waves. The effect of radioactive heat transfer has been treated using a differential approximation which is valid over entire optical depth range. The effects of wave geometry and magnetic field with finite electrical conductivity on the global behavior of the wave amplitude have also been studied. The two cases of diverging and converging waves have been discussed separately.

  1. Scattering processes and electrical conductivity of partially ionized hydrogen plasma

    Energy Technology Data Exchange (ETDEWEB)

    Ramazanov, T. [Fachbereich Physik, Universitaet Rostock, D-18051 Rostock (Germany); SRIETP, Al Farabi Kazakh National University, Tole bi, 96a, 480012, Almaty (Kazakhstan); Galiyev, K.; Dzhumagulova, K.N. [SRIETP, Al Farabi Kazakh National University, Tole bi, 96a, 480012, Almaty (Kazakhstan); Roepke, G.; Redmer, R. [Fachbereich Physik, Universitaet Rostock, D-18051 Rostock (Germany)

    2003-07-01

    We consider partially ionized hydrogen plasma for the density region n{sub e} = (10{sup 18} / 10{sup 22}) cm{sup -} {sup 3}. The cross sections for scattering processes between the particles are calculated within the partial wave method. Charged particles in the system (electrons, protons) interact via an effective potential that takes into account three-particle correlations. The Buckingham polarization potential is used to describe electron-atom and proton-atom interactions. The electrical conductivity is determined using the Chapman-Enskog method. The results are compared with other available data. (Abstract Copyright [2003], Wiley Periodicals, Inc.)

  2. Nanoscale electrical and mechanical characteristics of conductive polyaniline network in polymer composite films.

    Science.gov (United States)

    Jafarzadeh, Shadi; Claesson, Per M; Sundell, Per-Erik; Pan, Jinshan; Thormann, Esben

    2014-11-12

    The presence and characteristics of a connected network of polyaniline (PANI) within a composite coating based on polyester acrylate (PEA) has been investigated. The bulk electrical conductivity of the composite was measured by impedance spectroscopy. It was found that the composite films containing PANI have an electrical conductivity level in the range of semiconductors (order of 10(-3) S cm(-1)), which suggests the presence of a connected network of the conductive phase. The nanoscopic distribution of such a network within the cured film was characterized by PeakForce tunneling atomic force microscopy (AFM). This method simultaneously provides local information about surface topography and nanomechanical properties, together with electrical conductivity arising from conductive paths connecting the metallic substrate to the surface of the coating. The data demonstrates that a PEA-rich layer exists at the composite-air interface, which hinders the conductive phase to be fully detected at the surface layer. However, by exposing the internal structure of the composites using a microtome, a much higher population of a conductive network of PANI, with higher elastic modulus than the PEA matrix, was observed and characterized. Local current-voltage (I-V) spectroscopy was utilized to investigate the conduction mechanism within the nanocomposite films, and revealed non-Ohmic characteristics of the conductive network.

  3. Fluctuations electrical conductivity in a granular s-wave superconductor

    Science.gov (United States)

    Salehi, H.; Yousefvand, A.; Zargar Shoushtari, M.

    2017-01-01

    The present study tries to evaluate the fluctuation electrical conductivity in a granular s-wave superconductor at the temperature near to the critical temperature. The evaluation is conducted under the condition of limited tunneling conductance between the grains and small impurity concentration. All the first order fluctuation corrections, involving the nonlocal scattered electron in a granular s-wave superconductor, are calculated in three dimensions and in the limit of clean. Using Green's function theory initially, the Cooperon (impurity vertex), λ (q , ε1 , ε2) , and the fluctuation propagator, Lk (q , Ωk) , are calculated in the presence of impurities. Then, the three distinct contributions of Aslamazov-Larkin, Maki-Thompson, and Density of states are calculated by means of the Kubo formula. Analysis shows that the terms of Aslamazov-Larkin and anomalous Maki-Thompson have positive contributions to the conductivity in the clean limit, whereas the terms of Density of state and the regular Maki-Thompson have negative signs, leading to the reduction of total fluctuation conductivity.

  4. Electric breakdown during the pulsed current spreading in the sand

    Energy Technology Data Exchange (ETDEWEB)

    Vasilyak, L. M., E-mail: vasilyak@ihed.ras.ru; Vetchinin, S. P.; Panov, V. A.; Pecherkin, V. Ya.; Son, E. E. [Russian Academy of Sciences, Joint Institute for High Temperatures (Russian Federation)

    2016-03-15

    Processes of spreading of the pulsed current from spherical electrodes and an electric breakdown in the quartz sand are studied experimentally. When the current density on the electrode exceeds the critical value, a nonlinear reduction occurs in the grounding resistance as a result of sparking in the soil. The critical electric field strengths for ionization and breakdown are determined. The ionization-overheating instability is shown to develop on the electrode, which leads to the current contraction and formation of plasma channels.

  5. Study on electrical current variations in electromembrane extraction process: Relation between extraction recovery and magnitude of electrical current.

    Science.gov (United States)

    Rahmani, Turaj; Rahimi, Atyeh; Nojavan, Saeed

    2016-01-15

    This contribution presents an experimental approach to improve analytical performance of electromembrane extraction (EME) procedure, which is based on the scrutiny of current pattern under different extraction conditions such as using different organic solvents as supported liquid membrane, electrical potentials, pH values of donor and acceptor phases, variable extraction times, temperatures, stirring rates, different hollow fiber lengths and the addition of salts or organic solvents to the sample matrix. In this study, four basic drugs with different polarities were extracted under different conditions with the corresponding electrical current patterns compared against extraction recoveries. The extraction process was demonstrated in terms of EME-HPLC analyses of selected basic drugs. Comparing the obtained extraction recoveries with the electrical current patterns, most cases exhibited minimum recovery and repeatability at the highest investigated magnitude of electrical current. . It was further found that identical current patterns are associated with repeated extraction efficiencies. In other words, the pattern should be repeated for a successful extraction. The results showed completely different electrical currents under different extraction conditions, so that all variable parameters have contributions into the electrical current pattern. Finally, the current patterns of extractions from wastewater, plasma and urine samples were demonstrated. The results indicated an increase in the electrical current when extracting from complex matrices; this was seen to decrease the extraction efficiency.

  6. Electrical and hydrodynamic characterization of a high current pulsed arc

    Science.gov (United States)

    Sousa Martins, R.; Chemartin, L.; Zaepffel, C.; Lalande, Ph; Soufiani, A.

    2016-05-01

    High current pulsed arcs are of significant industrial interest and, aiming to reduce time and cost, there is progressively more and more need for computation tools that describe and predict the behaviour of these arcs. These simulation codes need inputs and validations by experimental databases, but accurate data is missing for this category of electric discharges. The principal lack of understanding is with respect to the transient phase of the current, which can reach thousands of amperes in a few microseconds. In this paper, we present the work realized on an experimental setup that simulates in the laboratory an arc column subjected to five levels of high pulsed current, ranging from 10 kA to 100 kA, with the last one corresponding to the standard lightning current waveform used in aircraft certification processes. This device was instrumented by high speed video cameras to assess the characteristic sizes of the arc channel and to characterize the shock wave generated by the arc expansion. The arc channel radius was measured over time during the axisymmetric phase and reached 3.2 cm. The position and velocity of the shock wave was determined during the first 140 μs. The background-oriented schlieren method was used to study the shock wave and a model for the light deflection inside the shock wave was developed. The mass density profile of the shock wave was estimated and showed good agreement with Rankine-Hugoniot relations at the wave front. Electrical measurements were also used to estimate the time-dependent resistance and conductivity of the arc for times lasting up to 50 μs.

  7. Thermal and electrical conductivity of iron at Earth's core conditions

    CERN Document Server

    Pozzo, Monica; Gubbins, David; Alfè, Dario

    2012-01-01

    The Earth acts as a gigantic heat engine driven by decay of radiogenic isotopes and slow cooling, which gives rise to plate tectonics, volcanoes, and mountain building. Another key product is the geomagnetic field, generated in the liquid iron core by a dynamo running on heat released by cooling and freezing to grow the solid inner core, and on chemical convection due to light elements expelled from the liquid on freezing. The power supplied to the geodynamo, measured by the heat-flux across the core-mantle boundary (CMB), places constraints on Earth's evolution. Estimates of CMB heat-flux depend on properties of iron mixtures under the extreme pressure and temperature conditions in the core, most critically on the thermal and electrical conductivities. These quantities remain poorly known because of inherent difficulties in experimentation and theory. Here we use density functional theory to compute these conductivities in liquid iron mixtures at core conditions from first principles- the first directly comp...

  8. Interplanetary double-shock ensembles with anomalous electrical conductivity

    Science.gov (United States)

    Dryer, M.

    1972-01-01

    Similarity theory is applied to the case of constant velocity, piston-driven, shock waves. This family of solutions, incorporating the interplanetary magnetic field for the case of infinite electric conductivity, represents one class of experimentally observed, flare-generated shock waves. This paper discusses the theoretical extension to flows with finite conductivity (presumably caused by unspecified modes of wave-particle interactions). Solutions, including reverse shocks, are found for a wide range of magnetic Reynolds numbers from one to infinity. Consideration of a zero and nonzero ambient flowing solar wind (together with removal of magnetic considerations) enables the recovery of earlier similarity solutions as well as numerical simulations. A limited comparison with observations suggests that flare energetics can be reasonably estimated once the shock velocity, ambient solar wind velocity and density, and ambient azimuthal Alfven Mach number are known.

  9. Electrical conductivity and Equation of State from Measurements of a Tamped Electrically Exploded Foil

    Science.gov (United States)

    Ruden, Edward; Amdahl, David; Cooksey, Rufus; Domonkos, Matthew; Robinson, Paul; Analla, Francis; Brown, Darwin; Kostora, Mark; Camacho, Frank

    2013-10-01

    Results are presented for an experiment that produces and diagnoses dynamic surface conditions of homogeneous warm dense matter (WDM) to infer intrinsic bulk properties such as density, pressure, temperature, specific energy, electrical conductivity, and emissivity in the ranges of up to few eV and down to 0.1 solid density-typical of those encountered in single shot pulsed power device electrodes. The goal is to validate ab initio models of matter encountered for predictive modeling of such devices. In the test whose results are presented here, the WDM is produced by Ohmically heating and exploding an 80 μm Al foil placed between two fused quartz tampers by the discharge of a 36 μF capacitor bank charged to 30.1 kV and discharged in 2.55 μs to a peak load current of 460 kA. Measurements are presented from two division of amplitude polarimeters which operate at 532 nm and 1064 nm, a complementary pyrometer which measures the spectral radiance ratio at those wavelengths, a long-range 660 nm photonic Doppler velocimeter, and a B-dot probe array from which the aforementioned intrinsic properties may be inferred. Available results are compared to a 3-D MHD ALEGRA simulation of the full dynamic load and return conductor geometry with a two-loop external coupled circuit.

  10. Electrical conductivity of a methane-air burning plasma under the action of weak electric fields

    Science.gov (United States)

    Colonna, G.; Pietanza, L. D.; D'Angola, A.; Laricchiuta, A.; Di Vita, A.

    2017-02-01

    This paper focuses on the calculation of the electrical conductivity of a methane-air flame in the presence of weak electric fields, solving the Boltzmann equation for free electrons self-consistently coupled with chemical kinetics. The chemical model GRI-Mech 3.0 has been completed with chemi-ionization reactions to model ionization in the absence of fields, and a database of cross sections for electron-impact-induced processes to account for reactions and transitions activated in the flame during discharge. The dependence of plasma properties on the frequency of an oscillating field has been studied under different pressure and gas temperature conditions. Fitting expressions of the electrical conductivity as a function of gas temperature and methane consumption are provided for different operational conditions in the Ansaldo Energia burner.

  11. Custom modular electromagnetic induction system for shallow electrical conductivity measurements

    Science.gov (United States)

    Mester, Achim; Zimmermann, Egon; Tan, Xihe; von Hebel, Christian; van der Kruk, Jan; van Waasen, Stefan

    2017-04-01

    Electromagnetic induction (EMI) is a contactless measurement method that offers fast and easy investigations of the shallow electrical conductivity, e.g. on the field-scale. Available frequency domain EMI systems offer multiple fixed transmitter-receiver (Tx-Rx) pairs with Tx-Rx separations between 0.3 and 4.0 m and investigation depths of up to six meters. Here, we present our custom EMI system that consists of modular sensor units that can either be transmitters or receivers, and a backpack containing the data acquisition system. The prototype system is optimized for frequencies between 5 and 30 kHz and Tx-Rx separations between 0.4 and 2.0 m. Each Tx and Rx signal is digitized separately and stored on a notebook computer. The soil conductivity information is determined after the measurements with advanced digital processing of the data using optimized correction and calibration procedures. The system stores the raw data throughout the entire procedure, which offers many advantages: (1) comprehensive accuracy and error analysis as well as the reproducibility of corrections and calibration procedures; (2) easy customizability of the number of Tx-/Rx-units and their arrangement and frequencies; (3) signals from simultaneously working transmitters can be separated within the received data using orthogonal signals, resulting in additional Tx-Rx pairs and maximized soil information; and (4) later improvements in the post-processing algorithms can be applied to old data sets. Exemplary, here we present an innovative setup with two transmitters and five receivers using orthogonal signals yielding ten Tx-Rx pairs. Note that orthogonal signals enable for redundant Tx-Rx pairs that are useful for verification of the transmitter signals and for data stacking. In contrast to commercial systems, only adjustments in the post-processing were necessary to realize such measurement configurations with flexibly combined Tx and Rx modules. The presented system reaches an accuracy of

  12. Electrical Conductance Tuning and Bistable Switching in Poly(N-vinylcarbazole)-Carbon Nanotube Composite Films.

    Science.gov (United States)

    Liu, Gang; Ling, Qi-Dan; Teo, Eric Yeow Hwee; Zhu, Chun-Xiang; Chan, D Siu-Hung; Neoh, Koon-Gee; Kang, En-Tang

    2009-07-28

    By varying the carbon nanotube (CNT) content in poly(N-vinylcarbazole) (PVK) composite thin films, the electrical conductance behavior of an indium-tin oxide/PVK-CNT/aluminum (ITO/PVK-CNT/Al) sandwich structure can be tuned in a controlled manner. Distinctly different electrical conductance behaviors, such as (i) insulator behavior, (ii) bistable electrical conductance switching effects (write-once read-many-times (WORM) memory effect and rewritable memory effect), and (iii) conductor behavior, are discernible from the current density-voltage characteristics of the composite films. The turn-on voltage of the two bistable conductance switching devices decreases and the ON/OFF state current ratio of the WORM device increases with the increase in CNT content of the composite film. Both the WORM and rewritable devices are stable under a constant voltage stress or a continuous pulse voltage stress, with an ON/OFF state current ratio in excess of 10(3). The conductance switching effects of the composite films have been attributed to electron trapping in the CNTs of the electron-donating/hole-transporting PVK matrix.

  13. Investigation on magnetoacoustic signal generation with magnetic induction and its application to electrical conductivity reconstruction.

    Science.gov (United States)

    Ma, Qingyu; He, Bin

    2007-08-21

    A theoretical study on the magnetoacoustic signal generation with magnetic induction and its applications to electrical conductivity reconstruction is conducted. An object with a concentric cylindrical geometry is located in a static magnetic field and a pulsed magnetic field. Driven by Lorentz force generated by the static magnetic field, the magnetically induced eddy current produces acoustic vibration and the propagated sound wave is received by a transducer around the object to reconstruct the corresponding electrical conductivity distribution of the object. A theory on the magnetoacoustic waveform generation for a circular symmetric model is provided as a forward problem. The explicit formulae and quantitative algorithm for the electrical conductivity reconstruction are then presented as an inverse problem. Computer simulations were conducted to test the proposed theory and assess the performance of the inverse algorithms for a multi-layer cylindrical model. The present simulation results confirm the validity of the proposed theory and suggest the feasibility of reconstructing electrical conductivity distribution based on the proposed theory on the magnetoacoustic signal generation with magnetic induction.

  14. Printability and Electrical Conductivity of UV Curable MWCNT Ink

    Science.gov (United States)

    Ortega, Ada; Park, Byungwoo; Kim, Nam Soo

    2015-03-01

    Composites reinforced with multiwalled carbon nanotubes (MWCNT) in a photosensitive acrylic matrix were successfully synthesized and their printing, rheological, and electrical behavior was characterized. The shape of the reinforcement MWCNT particles was analyzed by transmission electron microscopy. The MWCNT were mixed in the acrylic polymer at increasing concentrations until the percolation threshold was determined at 2 wt.% with a conductivity of 4.26 × 10-4 S/cm. The large increase in viscosity with addition of MWCNT showed the need for a printing system capable of dispensing solutions of up to 613 × 103 cp. Lines were printed with a precision dispensing system mounted in computer controlled x-y-z stages, while an integrated ultraviolet light emission diode dot with a single wavelength of 385 nm cured seconds after the ink was dispensed. The wetting properties of the composite with respect to polyester, polyethylene terephthalate, polyimide, and paper films were analyzed with a goniometer. The relationship between the contact angle, pattern accuracy, and electrical conductivity was determined for each substrate.

  15. Magnetoresistance, electrical conductivity, and Hall effect of glassy carbon

    Energy Technology Data Exchange (ETDEWEB)

    Baker, D.F.

    1983-02-01

    These properties of glassy carbon heat treated for three hours between 1200 and 2700/sup 0/C were measured from 3 to 300/sup 0/K in magnetic fields up to 5 tesla. The magnetoresistance was generally negative and saturated with reciprocal temperature, but still increased as a function of magnetic field. The maximum negative magnetoresistance measured was 2.2% for 2700/sup 0/C material. Several models based on the negative magnetoresistance being proportional to the square of the magnetic moment were attempted; the best fit was obtained for the simplest model combining Curie and Pauli paramagnetism for heat treatments above 1600/sup 0/C. Positive magnetoresistance was found only in less than 1600/sup 0/C treated glassy carbon. The electrical conductivity, of the order of 200 (ohm-cm)/sup -1/ at room temperature, can be empirically written as sigma = A + Bexp(-CT/sup -1/4) - DT/sup -1/2. The Hall coefficient was independent of magnetic field, insensitive to temperature, but was a strong function of heat treatment temperature, crossing over from negative to positive at about 1700/sup 0/C and ranging from -0.048 to 0.126 cm/sup 3//coul. The idea of one-dimensional filaments in glassy carbon suggested by the electrical conductivity is compatible with the present consensus view of the microstructure.

  16. Magnetoacoustic Tomography with Magnetic Induction for Electrical Conductivity based Tissue imaging

    Science.gov (United States)

    Mariappan, Leo

    Electrical conductivity imaging of biological tissue has attracted considerable interest in recent years owing to research indicating that electrical properties, especially electrical conductivity and permittivity, are indicators of underlying physiological and pathological conditions in biological tissue. Also, the knowledge of electrical conductivity of biological tissue is of interest to researchers conducting electromagnetic source imaging and in design of devices that apply electromagnetic energy to the body such as MRI. So, the need for a non-invasive, high resolution impedance imaging method is highly desired. To address this need we have studied the magnetoacoustic tomography with magnetic induction (MAT-MI) method. In MAT-MI, the object is placed in a static and a dynamic magnetic field giving rise to ultrasound waves. The dynamic field induces eddy currents in the object, and the static field leads to generation of acoustic vibrations from Lorentz force on the induced currents. The acoustic vibrations are at the same frequency as the dynamic magnetic field, which is chosen to match the ultrasound frequency range. These ultrasound signals can be measured by ultrasound probes and are used to reconstruct MAT-MI acoustic source images using possible ultrasound imaging approaches .The reconstructed high spatial resolution image is indicative of the object's electrical conductivity contrast. We have investigated ultrasound imaging methods to reliably reconstruct the MAT-MI image under the practical conditions of limited bandwidth and transducer geometry. The corresponding imaging algorithm, computer simulation and experiments are developed to test the feasibility of these different methods. Also, in experiments, we have developed a system with the strong static field of an MRI magnet and a strong pulsed magnetic field to evaluate MAT-MI in biological tissue imaging. It can be seen from these simulations and experiments that conductivity boundary images with

  17. Electrical conductivity, thermal conductivity, and rheological properties of graphene oxide-based nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Hadadian, Mahboobeh; Goharshadi, Elaheh K., E-mail: gohari@ferdowsi.um.ac.ir [Ferdowsi University of Mashhad, Department of Chemistry (Iran, Islamic Republic of); Youssefi, Abbas [Par-e-Tavous Research Institute (Iran, Islamic Republic of)

    2014-12-15

    Highly stable graphene oxide (GO)-based nanofluids were simply prepared by dispersing graphite oxide with the average crystallite size of 20 nm, in polar base fluids without using any surfactant. Electrical conductivity, thermal conductivity, and rheological properties of the nanofluids were measured at different mass fractions and various temperatures. An enormous enhancement, 25,678 %, in electrical conductivity of distilled water was observed by loading 0.0006 mass fraction of GO at 25 °C. GO–ethylene glycol nanofluids exhibited a non-Newtonian shear-thinning behavior followed by a shear-independent region. This shear-thinning behavior became more pronounced at higher GO concentrations. The maximum ratio of the viscosity of nanofluid to that of the ethylene glycol as a base fluid was 3.4 for the mass fraction of 0.005 of GO at 20 °C under shear rate of 27.5 s{sup −1}. Thermal conductivity enhancement of 30 % was obtained for GO–ethylene glycol nanofluid for mass fraction of 0.07. The measurement of the transport properties of this new kind of nanofluid showed that it could provide an ideal fluid for heat transfer and electronic applications.

  18. Electric fields associated with transient surface currents

    DEFF Research Database (Denmark)

    McAllister, Iain Wilson

    1992-01-01

    The boundary condition to be fulfilled by the potential functions associated with a transient surface current is derived and expressed in terms of generalized orthogonal coordinates. From the analysis, it can be deduced that the use of the method of separation of variables is restricted to three ...

  19. Determinants of the electric field during transcranial direct current stimulation

    DEFF Research Database (Denmark)

    Opitz, Alexander; Paulus, Walter; Will, Susanne

    2015-01-01

    Transcranial direct current stimulation (tDCS) causes a complex spatial distribution of the electric current flow in the head which hampers the accurate localization of the stimulated brain areas. In this study we show how various anatomical features systematically shape the electric field...... over the motor cortex in small steps to examine the resulting changes of the electric field distribution in the underlying cortex. We examined the effect of skull thickness and composition on the passing currents showing that thinner skull regions lead to higher electric field strengths. This effect...... fluid and the skull, the gyral depth and the distance to the anode and cathode. These factors account for up to 50% of the spatial variation of the electric field strength. Further, we demonstrate that individual anatomical factors can lead to stimulation "hotspots" which are partly resistant...

  20. Effect of Cerium on Mechanical Performance and Electrical Conductivity of Aluminum Rod for Electrical Purpose

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The effect of rare earth element Ce on mechanical performance and electrical conductivity of aluminum rod for electrical purpose were studied under industrial production condition. Using optical microscope, SEM, TEM, EDS and X-ray diffractometer, the microstructure and phase composition of aluminum rod were measured and analyzed. The results indicate that the content of rare earth element Ce is between 0.05%~0.16% in the aluminum rod for electrical purpose. Its tensile strength is enhanced to some extent. The research also discovers that the tensile strength is enhanced remarkably with impurity element Si content increases. Because influence of Si is big to the conductivity, the Si content should be controlled continuously strictly in the aluminum for electrical purpose. Adding rare earth element Ce reduces the solid solubility of Si in the aluminum matrix, and the negative effect of Si on the aluminum conductor reduces effectively. So the limit of in Si content in aluminum rod for electrical purpose can be relaxed moderately.

  1. Electrical conductivity and dielectric measurements of CoMTPP

    Energy Technology Data Exchange (ETDEWEB)

    El-Nahass, M.M., E-mail: prof_nahhas@yahoo.com [Physics Department, Faculty of Education, Ain Shams University, Roxy Square 11757, Cairo (Egypt); Atta, A.A. [Physics Department, Faculty of Education, Ain Shams University, Roxy Square 11757, Cairo (Egypt); Department of Physics, Faculty of Science, Taif University, Taif 888 (Saudi Arabia); El-Zaidia, E.F.M.; Farag, A.A.M. [Physics Department, Faculty of Education, Ain Shams University, Roxy Square 11757, Cairo (Egypt); Ammar, A.H. [Physics Department, Faculty of Education, Ain Shams University, Roxy Square 11757, Cairo (Egypt); Physics Department, Faculty of Science and Arts, Taibah University, Al-Ola (Saudi Arabia)

    2014-01-15

    Results of X-ray diffraction patterns (XRD) show that the powder of 5,10, 15,20-Tetrakis(4-methoxyphenyl)-21H,23H-porphine cobalt(II) (CoMTPP) has polycrystalline nature with triclinic structure. Miller's indices, (hkl), values for each diffraction peak in XRD spectrum are calculated. The electrical conductivity and dielectric properties of bulk CoMTPP have been investigated in the frequency range 42 Hz–5 MHz and in the temperature range 298–413 K. The frequency dependence of electrical conductivity, σ (ω, Τ), follows the Jonscher's universal dynamic law. The obtained results have been discussed in terms of the correlated barrier hopping (CBH) model, which is well adapted to CoMTPP semiconductor material. Complex impedance data are obtained at different frequency and temperature. The best fitting for the Cole–Cole plots can be represented by an equivalent circuit element composed of RQC. The conductivity in the direct regime, σ{sub dc}, is described by the variable range hopping (VRH). The values of dielectric constant, ε{sup ′} (ω), and dielectric loss, ε″ (ω), are found to be decrease with increasing frequency due to the interface states capacitance. - Highlights: • Investigation of the structural characterization of CoMTPP thin films using XRD. • The applicability of the CBH model to CoMTPP films. • Impedance spectroscopy is a very useful technique in solid state electronic system. • Dielectric constant and dielectric loss values decrease by increasing frequency.

  2. Acidosis slows electrical conduction through the atrio-ventricular node

    Directory of Open Access Journals (Sweden)

    Ashley Muir Nisbet

    2014-06-01

    Full Text Available Acidosis affects the mechanical and electrical activity of mammalian hearts but comparatively little is known about its effects on the function of the atrio-ventricular node (AVN. In this study, the electrical activity of the epicardial surface of the left ventricle of isolated Langendorff-perfused rabbit hearts was examined using optical methods. Perfusion with hypercapnic Tyrode’s solution (20% CO2, pH 6.7 increased the time of earliest activation (Tact from 100.5+7.9 to 166.1+7.2ms (n=8 at a pacing cycle length (PCL of 300ms (37oC. Tact increased at shorter PCL, and the hypercapnic solution prolonged Tact further: at 150ms PCL, Tact was prolonged from 131.0+5.2 to 174.9+16.3ms. 2:1 AVN block was common at shorter cycle lengths. Atrial and ventricular conduction times were not significantly affected by the hypercapnic solution suggesting that the increased delay originated in the AVN. Isolated right atrial preparations were superfused with Tyrode’s solutions at pH 7.4 (control, 6.8 and 6.3. Low pH prolonged the atrial-Hisian (AH interval, the effective and functional refractory periods and Wenckebach cycle length significantly. Complete AVN block occurred in 6 out of 9 preparations. Optical imaging of conduction at the AV junction revealed increased conduction delay in the region of the AVN, with less marked effects in atrial and ventricular tissue. Thus acidosis can dramatically prolong the AVN delay, and in combination with short cycle lengths, this can cause partial or complete AVN block and is therefore implicated in the development of brady-arrhythmias in conditions of local or systemic acidosis.

  3. Interdiffusion and Spinodal Decomposition in Electrically Conducting Polymer Blends

    Directory of Open Access Journals (Sweden)

    Antti Takala

    2015-08-01

    Full Text Available The impact of phase morphology in electrically conducting polymer composites has become essential for the efficiency of the various functional applications, in which the continuity of the electroactive paths in multicomponent systems is essential. For instance in bulk heterojunction organic solar cells, where the light-induced electron transfer through photon absorption creating excitons (electron-hole pairs, the control of diffusion of the spatially localized excitons and their dissociation at the interface and the effective collection of holes and electrons, all depend on the surface area, domain sizes, and connectivity in these organic semiconductor blends. We have used a model semiconductor polymer blend with defined miscibility to investigate the phase separation kinetics and the formation of connected pathways. Temperature jump experiments were applied from a miscible region of semiconducting poly(alkylthiophene (PAT blends with ethylenevinylacetate-elastomers (EVA and the kinetics at the early stages of phase separation were evaluated in order to establish bicontinuous phase morphology via spinodal decomposition. The diffusion in the blend was followed by two methods: first during a miscible phase separating into two phases: from the measurement of the spinodal decomposition. Secondly the diffusion was measured by monitoring the interdiffusion of PAT film into the EVA film at elected temperatures and eventually compared the temperature dependent diffusion characteristics. With this first quantitative evaluation of the spinodal decomposition as well as the interdiffusion in conducting polymer blends, we show that a systematic control of the phase separation kinetics in a polymer blend with one of the components being electrically conducting polymer can be used to optimize the morphology.

  4. Methodological Approaches in Conducting Overviews: Current State in HTA Agencies

    Science.gov (United States)

    Pieper, Dawid; Antoine, Sunya-Lee; Morfeld, Jana-Carina; Mathes, Tim; Eikermann, Michaela

    2014-01-01

    Objectives: Overviews search for reviews rather than for primary studies. They might have the potential to support decision making within a shorter time frame by reducing production time. We aimed to summarize available instructions for authors intending to conduct overviews as well as the currently applied methodology of overviews in…

  5. Light-emitting diodes fabricated on an electrical conducting flexible substrate

    Science.gov (United States)

    Choi, Won-Sik; Kim, Wan Jae; Park, Si-Hyun; Cho, Sung Oh; Lee, June Key; Park, Jun Beom; Ha, Jun-Seok; Chung, Tae Hoon; Jeong, Tak

    2017-01-01

    An array of InGaN-based flexible light-emitting diodes (FLEDs) was fabricated on a Ni-embedded electrical conducting flexible fabric with a full-scale 2-in. size. The FLED chip operation under current injection was realized using a single current probe as the negative electrode on the n-GaN surface; the conducting substrate was used as the positive electrode. The stability of the output power in the FLEDs was improved dramatically on the Ni-embedded conducting flexible fabric compared to that on the conventional polyimide flexible substrate. The former showed linear operation up to an input current 950 mA with no wavelength shift, whereas the latter exhibited rolling-over behavior after an input current of 200 mA.

  6. Alternating-Current Motor Drive for Electric Vehicles

    Science.gov (United States)

    Krauthamer, S.; Rippel, W. E.

    1982-01-01

    New electric drive controls speed of a polyphase as motor by varying frequency of inverter output. Closed-loop current-sensing circuit automatically adjusts frequency of voltage-controlled oscillator that controls inverter frequency, to limit starting and accelerating surges. Efficient inverter and ac motor would give electric vehicles extra miles per battery charge.

  7. Modulation Electric Field Intensity Sensor in a Conductive Medium

    Directory of Open Access Journals (Sweden)

    O. I. Miseyk

    2015-01-01

    Full Text Available The requirement to conduct measurements across the big water areas and in the ocean depths arises a problem of creating devices to measure an electric field, being either set on the high-speed mobile carriers, or implemented as the sounders, which investigate a vertical or horizontal structure of the electric field of ocean. Manufactured, designed, and hypothetical devices for measuring poor electric fields of the ocean were analyzed. The analysis allowed us to prove that there is a need in creation of modulation sensors (with modulation of a non-electric origin either with periodically changing capabilities of measuring bases, or with space-changing (and therefore, time-changing position of measuring base of primary converters, as the most effective in terms of allocation and measurement of the modulated signal from unmodulated noise.The paper considers the mathematical models of modulation sensors of electric field intensity in the ultralow-frequency range, which are set on the mobile carriers. It justifies a choice of two basic models of primary converters with a change of the measuring base in space, i.e. with the "changing" base and with the "rotating" base. A feature of the offered models with vertical sounding is the minimum value of noise because of rotation of measuring electrodes in a magnetic field of Earth, and hydrodynamic noise. The paper shows that noise caused by the relative movement of sensor and water completely disappears in two cases:1. for a vertical sounder in the autonomous mode or a horizontal sounder with zero buoyancy in the specified shape of water;2. in a case when the sensor has no component of measuring base in the considered area, for example, for the sensor with in-line array of electrodes located in the horizontal plane.The paper proves advantage of the model with "rotating" measuring base, which provides the maximum power transfer from the primary converter to loading for all relative positions of an external

  8. Development of Novel Alternative Technologies for Decontamination of Warfare Agents: Electric Heating with Intrinsically Conductive Polymers

    Science.gov (United States)

    2007-11-02

    in converting electric energy to thermal energy for the decon applications. Other conductive materials, such as polythiophenes , polypyrroles, carbon...Development of Novel Alternative Technologies for Decontamination of Warfare Agents: Electric Heating with Intrinsically Conductive Polymers...Joule)-heating with conducting polymers. The basic concept is that electrically conducting polymers, such as polyaniline, can be used as coatings or

  9. Electrical conductivity of carbonaceous chondrites and electric heating of meteorite parent bodies

    Science.gov (United States)

    Duba, AL

    1987-01-01

    Electromagnetic heating of rock-forming materials most probably was an important process in the early history of the solar system. Electrical conductivity experiments of representative materials such as carbonaceous chondrites are necessary to obtain data for use in electromagnetic heating models. With the assumption that carbon was present at grain boundaries in the material that comprised the meteorite parent bodies, the electrical heating of such bodies was calculated as a function of body size and solar distance using the T-Tauri model of Sonett and Herbert (1977). The results are discussed.

  10. Study of Electrical Conduction Mechanism of Organic Double-Layer Diode Using Electric Field Induced Optical Second Harmonic Generation Measurement.

    Science.gov (United States)

    Nishi, Shohei; Taguchi, Dai; Manaka, Takaaki; Iwamoto, Mitsumasa

    2016-04-01

    By using electric field induced optical second harmonic generation (EFISHG) and current voltage (I-V) measurements, we studied the electrical transport mechanism of organic double-layer diodes with a structure of Au/N, N'-di-[(1-naphthyl)-N, N'-diphenyl]-(1,1'-biphenyl)-4,4'-diamine (a-NPD)/poly(methyl methacrylate) (PMMA)/indium zinc oxide (IZO). Here the α-NPD is a carrier transport layer and the PMMA is an electrical insulating layer. The current level was very low, but the I-V characteristics showed a rectifying behavior. The EFISHG measurement selectively and directly probed the electric field across the α-NPD layer, and showed that the electric field across the a-NPD layer is completely relaxed owing to the charge accumulation at the a-NPD/PMMA interface in the region V > 0, whereas the carrier accumulation was not significant in the region V < 0. On the basis of these experimental results, we proposed a model of the rectification. Further, by coupling the I-V characteristics with the EFISHG measurement, the I-V characteristics of the diodes were well converted into the current-electric field (I-E) characteristics of the α-NPD layer and the PMMA layer. The I-E characteristics suggested the Schottky-type conduction governs the carrier transport. We conclude that the I-V measurement coupled with the EFISHG measurement is very useful to study carrier transport mechanism of the organic double-layer diodes.

  11. Superposition approach for description of electrical conductivity in sheared MWNT/polycarbonate melts

    Directory of Open Access Journals (Sweden)

    M. Saphiannikova

    2012-06-01

    Full Text Available The theoretical description of electrical properties of polymer melts, filled with attractively interacting conductive particles, represents a great challenge. Such filler particles tend to build a network-like structure which is very fragile and can be easily broken in a shear flow with shear rates of about 1 s–1. In this study, measured shear-induced changes in electrical conductivity of polymer composites are described using a superposition approach, in which the filler particles are separated into a highly conductive percolating and low conductive non-percolating phases. The latter is represented by separated well-dispersed filler particles. It is assumed that these phases determine the effective electrical properties of composites through a type of mixing rule involving the phase volume fractions. The conductivity of the percolating phase is described with the help of classical percolation theory, while the conductivity of non-percolating phase is given by the matrix conductivity enhanced by the presence of separate filler particles. The percolation theory is coupled with a kinetic equation for a scalar structural parameter which describes the current state of filler network under particular flow conditions. The superposition approach is applied to transient shear experiments carried out on polycarbonate composites filled with multi-wall carbon nanotubes.

  12. Electrical transport properties of oligothiophene based molecular films studied by current sensing Atomic Force Microscopy

    NARCIS (Netherlands)

    Hendriksen, Bas L.M.; Martin, Florent; Qi, Yabing; Qi, Y.; Mauldin, Clayton; Vukmirovic, Nenad; Ren, JunFeng; Wormeester, Herbert; Katan, Allard J.; Altoe, Virginia; Aloni, Shaul; Frechet, Jean M.J.; Wang, Lin-Wang; Salmeron, Miquel

    2011-01-01

    Using conducting probe atomic force microscopy (CAFM) we have investigated the electrical conduction properties of monolayer films of a pentathiophene derivative on a SiO2/Si-p+ substrate. By a combination of current–voltage spectroscopy and current imaging we show that lateral charge transport

  13. Space Weather Effects on Current and Future Electric Power Systems

    Science.gov (United States)

    Munoz, D.; Dutta, O.; Tandoi, C.; Brandauer, W.; Mohamed, A.; Damas, M. C.

    2016-12-01

    This work addresses the effects of Geomagnetic Disturbances (GMDs) on the present bulk power system as well as the future smart grid, and discusses the mitigation of these geomagnetic impacts, so as to reduce the vulnerabilities of the electric power network to large space weather events. Solar storm characterized by electromagnetic radiation generates geo-electric fields that result in the flow of Geomagnetically Induced Currents (GICs) through the transmission lines, followed by transformers and the ground. As the ground conductivity and the power network topology significantly vary with the region, it becomes imperative to estimate of the magnitude of GICs for different places. In this paper, the magnitude of GIC has been calculated for New York State (NYS) with the help of extensive modelling of the whole NYS electricity transmission network using real data. Although GIC affects only high voltage levels, e.g. above 300 kV, the presence of coastline in NYS makes the low voltage transmission lines also susceptible to GIC. Besides this, the encroachment of technologies pertaining to smart grid implementation, such as Phasor Measurement Units (PMUs), Microgrids, Flexible AC Transmission System (FACTS), and Information and Communication Technology (ICT) have been analyzed for GMD impacts. Inaccurate PMU results due to scintillation of GPS signals that are affected by electromagnetic interference of solar storm, presence of renewable energy resources in coastal areas that are more vulnerable to GMD, the ability of FACTS devices to either block or pave new path for GICs and so on, shed some light on impacts of GMD on smart grid technologies.

  14. Electrical conductivity of intermediate magmas from Uturuncu Volcano (Bolivia)

    Science.gov (United States)

    Laumonier, Mickael; Gaillard, Fabrice; Sifre, David

    2015-04-01

    Magmas erupted at Uturuncu volcano (South Bolivia) comes from the Altiplano-Puna Magma Body (APMB, Chile-Bolivia), a crustal massive body of 80 km long by 10 km thick located at ~ 35 km depth named. Recent magneto telluric surveys reveal a resistivity lower than 1 ohm.m due to the presence of melt which could result in the reactivation of the volcano. In order to better constrain the resistivity profiles and thus the conditions of magma storage of the APMB, we have performed in situ electrical measurements on natural dacites and andesites from Uturuncu with a 4-wire set up in a piston cylinder and internally heated pressure vessel. The range of temperature (500 to 1300°C), pressure (0.3 to 2 Gpa), and the various water contents covers the respective ranges occurring at natural conditions. The results show that the conductivity increases with the temperature and the water content but slightly decreases with the pressure. Then a model was built from these results so as to help in (i) interpreting the electrical signature of natural magmas, (ii) constraining their conditions (chemical composition, temperature, pressure, water content, melt fraction) from the source to the storage location and (iii) providing information on the interior structure of a volcano and its reservoir.

  15. Prevention of Staphylococcus epidermidis biofilm formation using electrical current.

    Science.gov (United States)

    Del Pozo, Jose L; Rouse, Mark S; Euba, Gorane; Greenwood-Quaintance, Kerryl E; Mandrekar, Jayawant N; Steckelberg, James M; Patel, Robin

    2014-09-05

    A technique for the prevention of staphylococcal adhesion by electrical current exposure was investigated. Teflon coupons were exposed to a continuous flow of 103 cfu/ml Staphylococcus epidermidis with or without 2000 microA DC electrical current delivered by electrodes on opposite sides of a coupon, touching neither each other nor the coupon. A mean 3.46 (SD, 0.20) and 5.70 (SD, 1.03) log10 cfu/cm2 were adhered to the non-electrical current exposed coupons after 4 h and 24 h, respectively. A mean 2.46 (SD, 0.31) and 1.47 (SD, 0.73) log10 cfu/cm2 were adhered after 4 h and 24 h with exposure to 2000 microA electrical current delivered by graphite electrodes. A mean 2.21 (SD, 0.14) and 0.55 (SD, 0.00) log10 cfu/cm2 were adhered after 4 h and 24 h with exposure to 2000 microA electrical current delivered by stainless steel electrodes. Electrical current may be useful in the prevention of staphylococcal adhesion to biomaterials.

  16. Electrical conductance of carbon nanotubes with misaligned ends

    Energy Technology Data Exchange (ETDEWEB)

    Pantano, Antonio, E-mail: antonio.pantano@unipa.it; Muratore, Giuseppe; Montinaro, Nicola [Universita degli Studi di Palermo, Dipartimento di Ingegneria Chimica, Gestionale, Informatica e Meccanica (Italy)

    2013-09-15

    During a manufacturing process, when a straight carbon nanotube is placed on a substrate, e.g., production of transistors, its two ends are often misaligned. In this study, we investigate the effects of multiwall carbon nanotubes' (MWCNTs) outer diameter and chirality on the change in conductance due to misalignment of the two ends. The length of the studied MWCNTs was 120 nm, while the diameters ranged between 4 and 7 nm. A mixed finite element-tight-binding approach was carefully designed to realize reduction in computational time by orders of magnitude in calculating the deformation-induced changes in the electrical transport properties of the nanotubes. Numerical results suggest that armchair MWCNTs of small diameter should work better if used as conductors, while zigzag MWCNTs of large diameter are more suitable for building sensors.Graphical Abstract.

  17. Facile synthesis of boron nitride nanotubes and improved electrical conductivity.

    Science.gov (United States)

    Chen, Yongjun; Luo, Lijie; Zhou, Longchang; Mo, Libin; Tong, Zhangfa

    2010-02-01

    A layer of catalyst film on substrate is usually required during the vapor-liquid-solid (VLS) growth of one-dimensional (1D) nanomaterials. In this work, however, a novel approach for synthesizing high-purity bamboo-like boron nitride (BN) nanotubes directly on commercial stainless steel foils was demonstrated. Synthesis was realized by heating boron and zinc oxide (ZnO) powders at 1200 degrees C under a mixture gas flow of nitrogen and hydrogen. The stainless steel foils played an additional role of catalyst besides the substrate during the VLS growth of the nanotubes. In addition, the electrical conductivity of the BN nanotubes was efficiently improved in a simple way by coating with Au and Pd nanoparticles. The decorated BN nanotubes may find potential applications in catalysts, sensors and nanoelectronics.

  18. Electrical conductivity and viscosity of borosilicate glasses and melts

    DEFF Research Database (Denmark)

    Ehrt, Doris; Keding, Ralf

    2009-01-01

    , 0 to 62·5 mol% B2O3, and 25 to 85 mol% SiO2. The glass samples were characterised by different methods. Refractive indices, density and thermal expansion were measured. Phase separation effects were investigated by electron microscopy. The electrical conductivity of glasses and melts were determined...... by impedance measurements in a wide temperature range (250 to 1450°C). The activation energies were calculated by Arrhenius plots in various temperature regions: below the glass transition temperature, Tg, above the melting point, Tl, and between Tg and Tl. Viscosity measurements were carried out...... with different methods from Tg to the melt. The measured data were fitted and the activation energies calculated. Simple exponential behaviour was found only in very narrow temperature ranges. The effect of B2O3 in sodium borosilicate glasses and melts is discussed in comparison with sodium silicate glasses...

  19. Electrically conductive, optically transparent polymer/carbon nanotube composites

    Science.gov (United States)

    Connell, John W. (Inventor); Smith, Jr., Joseph G. (Inventor); Harrison, Joycelyn S. (Inventor); Park, Cheol (Inventor); Watson, Kent A. (Inventor); Ounaies, Zoubeida (Inventor)

    2011-01-01

    The present invention is directed to the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in the visible range (i.e., 400-800 nm), electrical conductivity, and high thermal stability. By appropriate selection of the matrix resin, additional properties such as vacuum ultraviolet radiation resistance, atomic oxygen resistance, high glass transition (T.sub.g) temperatures, and excellent toughness can be attained. The resulting nanocomposites can be used to fabricate or formulate a variety of articles such as coatings on a variety of substrates, films, foams, fibers, threads, adhesives and fiber coated prepreg. The properties of the nanocomposites can be adjusted by selection of the polymer matrix and CNT to fabricate articles that possess high optical transparency and antistatic behavior.

  20. Genetic aspects of milk electrical conductivity in Italian Brown cattle

    Directory of Open Access Journals (Sweden)

    Martino Cassandro

    2010-01-01

    Full Text Available Electrical conductivity (EC of milk is defined as an indicator of the udder health. The EC is a low cost and easy recordable information in dairy herds with automatic milking systems. The heritability of EC showed to be higher than somatic cell count and for this reason might be an useful trait for indirect selection for mastitis resistance. The heritability for EC in Italian Brown cattle was equal to 0.23. Therefore, EC could be useful not only for dairy cows management but also for selection of dairy cows. The high correlation between breeding values for SCC and EC is promising in order for improving mastitis resistance and functional ability of dairy cows.

  1. Routing Physarum with electrical flow/current

    CERN Document Server

    Tsuda, Soichiro; Adamatzky, Andrew; Mills, Jonathan

    2012-01-01

    Plasmodium stage of Physarum polycephalum behaves as a distributed dynamical pattern formation mechanism who's foraging and migration is influenced by local stimuli from a wide range of attractants and repellents. Complex protoplasmic tube network structures are formed as a result, which serve as efficient `circuits' by which nutrients are distributed to all parts of the organism. We investigate whether this `bottom-up' circuit routing method may be harnessed in a controllable manner as a possible alternative to conventional template-based circuit design. We interfaced the plasmodium of Physarum polycephalum to the planar surface of the spatially represented computing device, (Mills' Extended Analog Computer, or EAC), implemented as a sheet of analog computing material whose behaviour is input and read by a regular 5x5 array of electrodes. We presented a pattern of current distribution to the array and found that we were able to select the directional migration of the plasmodium growth front by exploiting pla...

  2. Large apparent electric size of solid-state nanopores due to spatially extended surface conduction.

    Science.gov (United States)

    Lee, Choongyeop; Joly, Laurent; Siria, Alessandro; Biance, Anne-Laure; Fulcrand, Rémy; Bocquet, Lydéric

    2012-08-08

    Ion transport through nanopores drilled in thin membranes is central to numerous applications, including biosensing and ion selective membranes. This paper reports experiments, numerical calculations, and theoretical predictions demonstrating an unexpectedly large ionic conduction in solid-state nanopores, taking its origin in anomalous entrance effects. In contrast to naive expectations based on analogies with electric circuits, the surface conductance inside the nanopore is shown to perturb the three-dimensional electric current streamlines far outside the nanopore in order to meet charge conservation at the pore entrance. This unexpected contribution to the ionic conductance can be interpreted in terms of an apparent electric size of the solid-state nanopore, which is much larger than its geometric counterpart whenever the number of charges carried by the nanopore surface exceeds its bulk counterpart. This apparent electric size, which can reach hundreds of nanometers, can have a major impact on the electrical detection of translocation events through nanopores, as well as for ionic transport in biological nanopores.

  3. Semiconductor structures having electrically insulating and conducting portions formed from an AlSb-alloy layer

    Science.gov (United States)

    Spahn, Olga B.; Lear, Kevin L.

    1998-01-01

    A semiconductor structure. The semiconductor structure comprises a plurality of semiconductor layers formed on a substrate including at least one layer of a III-V compound semiconductor alloy comprising aluminum (Al) and antimony (Sb), with at least a part of the AlSb-alloy layer being chemically converted by an oxidation process to form superposed electrically insulating and electrically conducting portions. The electrically insulating portion formed from the AlSb-alloy layer comprises an oxide of aluminum (e.g. Al.sub.2 O.sub.3), while the electrically conducting portion comprises Sb. A lateral oxidation process allows formation of the superposed insulating and conducting portions below monocrystalline semiconductor layers for forming many different types of semiconductor structures having particular utility for optoelectronic devices such as light-emitting diodes, edge-emitting lasers, vertical-cavity surface-emitting lasers, photodetectors and optical modulators (waveguide and surface normal), and for electronic devices such as heterojunction bipolar transistors, field-effect transistors and quantum-effect devices. The invention is expected to be particularly useful for forming light-emitting devices for use in the 1.3-1.6 .mu.m wavelength range, with the AlSb-alloy layer acting to define an active region of the device and to effectively channel an electrical current therein for efficient light generation.

  4. The effect of electrical stray current on material properties of mortar specimens

    NARCIS (Netherlands)

    Susanto, A.; Koleva, D.A.; Van Beek, C.; Van Breugel, K.

    2013-01-01

    Well known is that stray electrical current i.e. current with a spatial distribution in any conductive environment, can affect civil structures, e.g. initiate or enhance steel corrosion or affect microstructural and mechanical properties of the cement-based bulk matrix. While the former is related

  5. Current fluctuations in a two dimensional model of heat conduction

    Science.gov (United States)

    Pérez-Espigares, Carlos; Garrido, Pedro L.; Hurtado, Pablo I.

    2011-03-01

    In this work we study numerically and analytically current fluctuations in the two-dimensional Kipnis-Marchioro-Presutti (KMP) model of heat conduction. For that purpose, we use a recently introduced algorithm which allows the direct evaluation of large deviations functions. We compare our results with predictions based on the Hydrodynamic Fluctuation Theory (HFT) of Bertini and coworkers, finding very good agreement in a wide interval of current fluctuations. We also verify the existence of a well-defined temperature profile associated to a given current fluctuation which depends exclusively on the magnitude of the current vector, not on its orientation. This confirms the recently introduced Isometric Fluctuation Relation (IFR), which results from the time-reversibility of the dynamics, and includes as a particular instance the Gallavotti-Cohen fluctuation theorem in this context but adds a completely new perspective on the high level of symmetry imposed by timereversibility on the statistics of nonequilibrium fluctuations.

  6. High electrical conductivity in out of plane direction of electrodeposited Bi2Te3 films

    Directory of Open Access Journals (Sweden)

    Miguel Muñoz Rojo

    2015-08-01

    Full Text Available The out of plane electrical conductivity of highly anisotropic Bi2Te3 films grown via electro-deposition process was determined using four probe current-voltage measurements performed on 4.6 - 7.2 μm thickness Bi2Te3 mesa structures with 80 - 120 μm diameters sandwiched between metallic film electrodes. A three-dimensional finite element model was used to predict the electric field distribution in the measured structures and take into account the non-uniform distribution of the current in the electrodes in the vicinity of the probes. The finite-element modeling shows that significant errors could arise in the measured film electrical conductivity if simpler one-dimensional models are employed. A high electrical conductivity of (3.2 ± 0.4 ⋅ 105 S/m is reported along the out of plane direction for Bi2Te3 films highly oriented in the [1 1 0] direction.

  7. Reduction Kinetics and Electrical Conductivity in Lead Disilicate Glasses.

    Science.gov (United States)

    Kumar, Sajal

    Reduced lead silicate based glasses constitute the active element in night vision devices. The thermochemical reduction of these glasses is necessary to render them electronically conducting. In this thesis some of the more important reduction parameters and their influence on the post-reduction have been identified. The aim of this work was to establish the conduction mechanism(s) responsible in these glasses. The samples were reduced in hydrogen of varying moisture content, in the temperature range of 330-500 ^circC for various times. X-ray diffraction and thermogravimetric measurements clearly established that the reduction resulted in the formation of metallic lead islands with a diameter of ~4 nm, with an inter-island spacing of ~ 3.4 nm. In contrast to the electrical conductivity, the microstructure was found to be a weak function of reduction parameters. No coarsening of the microstructure was observed even after extended anneals at high temperatures, strongly suggesting that the final lead-island size was dictated by the size of the holes either present in the parent glass or formed as a result of reduction, in an otherwise rigid glass network. The electronic conductivity was found to go through a minimum with reduction temperature. Increasing the moisture content of the reducing gas resulted in an increase in the post-reduction resistance and in the sharpness of the minimum. The post-reduction activation energies were measured to be ~0.09 eV and found to be independent of all reduction variables, indicating that a single conduction mechanism was operative in all cases. The variation in conductivity was ascribed to variation in the number of mobile carriers. The mechanism of conduction was proposed to be that of a bipolaron hopping between Pb^{4+} and Pb ^{2+} ions, the former forming as a result of a disproportionation reaction that takes place during reduction and/or cooling of the samples from the reduction temperature. The electron transport is believed

  8. Statistical properties of Joule heating rate, electric field and conductances at high latitudes

    Directory of Open Access Journals (Sweden)

    A. T. Aikio

    2009-07-01

    Full Text Available Statistical properties of Joule heating rate, electric field and conductances in the high latitude ionosphere are studied by a unique one-month measurement made by the EISCAT incoherent scatter radar in Tromsø (66.6 cgmlat from 6 March to 6 April 2006. The data are from the same season (close to vernal equinox and from similar sunspot conditions (about 1.5 years before the sunspot minimum providing an excellent set of data to study the MLT and Kp dependence of parameters with high temporal and spatial resolution.

    All the parameters show a clear MLT variation, which is different for low and high Kp conditions. Our results indicate that the response of morning sector conductances and conductance ratios to increased magnetic activity is stronger than that of the evening sector. The co-location of Pedersen conductance maximum and electric field maximum in the morning sector produces the largest Joule heating rates 03–05 MLT for Kp≥3. In the evening sector, a smaller maximum occurs at 18 MLT. Minimum Joule heating rates in the nightside are statistically observed at 23 MLT, which is the location of the electric Harang discontinuity.

    An important outcome of the paper are the fitted functions for the Joule heating rate as a function of electric field magnitude, separately for four MLT sectors and two activity levels (Kp<3 and Kp≥3. In addition to the squared electric field, the fit includes a linear term to study the possible anticorrelation or correlation between electric field and conductance. In the midday sector, positive correlation is found as well as in the morning sector for the high activity case. In the midnight and evening sectors, anticorrelation between electric field and conductance is obtained, i.e. high electric fields are associated with low conductances. This is expected to occur in the return current regions adjacent to

  9. Electrical conduction of LiF interlayers in organic diodes

    Energy Technology Data Exchange (ETDEWEB)

    Bory, Benjamin F.; Janssen, René A. J.; Meskers, Stefan C. J., E-mail: s.c.j.meskers@tue.nl [Molecular Materials and Nanosystems and Institute for Complex Molecular Systems, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven (Netherlands); Gomes, Henrique L. [Instituto de Telecomunicações, Av. Rovisco, Pais, 1, 1049–001, Lisboa, Portugal and Universidade do Algarve, Campus de Gambelas, 8005-139 Faro (Portugal); Leeuw, Dago M. de [Max-Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany and King Abdulaziz University, Jeddah (Saudi Arabia)

    2015-04-21

    An interlayer of LiF in between a metal and an organic semiconductor is commonly used to improve the electron injection. Here, we investigate the effect of moderate bias voltages on the electrical properties of Al/LiF/poly(spirofluorene)/Ba/Al diodes by systematically varying the thickness of the LiF layer (2-50 nm). Application of forward bias V below the bandgap of LiF (V < E{sub g} ∼ 14 V) results in reversible formation of an electrical double layer at the LiF/poly(spirofluorene) hetero-junction. Electrons are trapped on the poly(spirofluorene) side of the junction, while positively charged defects accumulate in the LiF with number densities as high as 10{sup 25}/m{sup 3}. Optoelectronic measurements confirm the built-up of aggregated, ionized F centres in the LiF as the positive trapped charges. The charged defects result in efficient transport of electrons from the polymer across the LiF, with current densities that are practically independent of the thickness of the LiF layer.

  10. Experimental and theoretical study of AC electrical conduction mechanisms of semicrystalline parylene C thin films.

    Science.gov (United States)

    Kahouli, Abdelkader; Sylvestre, Alain; Jomni, Fethi; Yangui, Béchir; Legrand, Julien

    2012-01-26

    The electrical conduction mechanisms of semicrystalline thermoplastic parylene C (-H(2)C-C(6)H(3)Cl-CH(2)-)(n) thin films were studied in large temperature and frequency regions. The alternative current (AC) electrical conduction in parylene C is governed by two processes which can be ascribed to a hopping transport mechanism: correlated barrier hopping (CBH) model at low [77-155 K] and high [473-533 K] temperature and the small polaron tunneling mechanism (SPTM) from 193 to 413 K within the framework of the universal law of dielectric response. The conduction mechanism is explained with the help of Elliot's theory, and the Elliot's parameters are determined. From frequency- and temperature-conductivity characteristics, the activation energy is found to be 1.27 eV for direct current (DC) conduction interpreted in terms of ionic conduction mechanism. The power law dependence of AC conductivity is interpreted in terms of electron hopping with a density N(E(F)) (~10(18) eV cm(-3)) over a 0.023-0.03 eV high barrier across a distance of 1.46-1.54 Å.

  11. Method and device for current driven electric energy conversion

    DEFF Research Database (Denmark)

    2012-01-01

    configurations such as half bridge buck, full bridge buck, half bridge boost, or full bridge boost. A current driven conversion is advantageous for high efficient energy conversion from current sources such as solar cells or where a voltage source is connected through long cables, e.g. powerline cables for long......Device comprising an electric power converter circuit for converting electric energy. The converter circuit comprises a switch arrangement with two or more controllable electric switches connected in a switching configuration and controlled so as to provide a current drive of electric energy from...... the output from the switch arrangement and designed such that a high impedance at a frequency range below the switching frequency is obtained, seen from the output terminals. Switches implemented by normally-on-devices are preferred, e.g. in the form of a JFET. The converter circuit may be in different...

  12. Analysis of Electric Vehicle DC High Current Conversion Technology

    Science.gov (United States)

    Yang, Jing; Bai, Jing-fen; Lin, Fan-tao; Lu, Da

    2017-05-01

    Based on the background of electric vehicles, it is elaborated the necessity about electric energy accurate metering of electric vehicle power batteries, and it is analyzed about the charging and discharging characteristics of power batteries. It is needed a DC large current converter to realize accurate calibration of power batteries electric energy metering. Several kinds of measuring methods are analyzed based on shunts and magnetic induction principle in detail. It is put forward power batteries charge and discharge calibration system principle, and it is simulated and analyzed ripple waves containing rate and harmonic waves containing rate of power batteries AC side and DC side. It is put forward suitable DC large current measurement methods of power batteries by comparing different measurement principles and it is looked forward the DC large current measurement techniques.

  13. Electrical conductivity measurements from the GISP2 and GRIP Greenland ice cores

    DEFF Research Database (Denmark)

    Dahl-Jensen, Dorthe; Clausen, Henrik Brink; Taylor, K. C.

    1993-01-01

    . Here we present electrical conductivity records for the Greenland Ice Sheet Project 2 (GISP2) and Greenland Ice-core Project (GRIP) ice cores, drilled 28 km apart to enable direct comparison of the results. The upper parts of both records are consistent with previous evidence from other Greenland cores......THE direct-current electrical conductivity of glacial ice depends on its acidity1-3, and can also indicate changes in climate, as ice formed in cold, dusty periods has a high concentration of alkaline dust1,4,5, which significantly reduces the conductivity6,7 compared to warmer, less dusty periods......4,8& #150;12 for a stable Greenland climate during the Holocene, and a series of warm events punctuating the last glacial period. However, there is a significant discrepancy between the two records in the bottom 10% of the cores, calling into question recent reports of climate variability...

  14. Innovative methodology for electrical conductivity measurements and metal partition in biosolid pellets

    Science.gov (United States)

    Jordan, Manuel Miguel; Rincón-Mora, Beatriz; Belén Almendro-Candel, María; Navarro-Pedreño, José; Gómez-Lucas, Ignacio; Bech, Jaume

    2017-04-01

    Use of biosolids to improve the nutrient content in a soil is a common practice. The obligation to restore abandoned mine and the correct application of biosolids is guaranteed by the legislation on waste management, biosolids and soil conservation (Jordán et al. 2008). The present research was conducted to determine electrical conductivity in dry wastes (pellets) using a innovative methodology (Camilla and Jordán, 2009). On the other hand, the present study was designed to examine the distribution of selected heavy metals in biosolid pellets, and also to relate the distribution patterns of these metals. In this context, heavy metal concentrations were studied in biosolid pellets under different pressures. Electrical conductivity measurements were taken in biosolid pellets under pressures on the order of 50 to 150 MPa and with currents of 10-15 A. Measurements of electrical conductivity and heavy metal content for different areas (H1, H2, and H3) were taken. Total content of metals was determined following microwave digestion and analysed by ICP/MS. Triplicate portions were weighed in polycarbonate centrifuge tubes and sequentially extracted. The distribution of chemical forms of Cd, Ni, Cr, and Pb in the biosolids was studied using a sequential extraction procedure that fractionates the metal into soluble-exchangeable, specifically sorbed-carbonate bound, oxidizable, reducible, and residual forms. The residual, reducible, and carbonate-sorbed forms were dominant. Higher Cr and Ni content were detected in pellets made with biosolids from the H3. The highest Cd and Ni values were detected in the H2. The trends of the conductivity curves were similar for the sludge from the isolation surface (H1) and for the mesophilous area (H2). In the case of the thermophilous area (H3), the electrical conductivity showed extremely high values. This behaviour was similar in the case of the Cr and Ni content. However, in the case of Cd and Pb, the highest values were detected in

  15. Density, Electrical Conductivity and Viscosity of Hg(0.8)Cd(0.2)Te Melt

    Science.gov (United States)

    Li, C.; Scripa, R. N.; Ban, H.; Su, C.-H.; Lehoczky, S. L.

    2004-01-01

    The density, viscosity, and electrical conductivity of Hg(0.8)Cd(0.2)Te melt were measured as a function of temperature. A pycnometric method was used to measure the melt density in the temperature range of 1072 to 1122 K. The viscosity and electrical conductivity were determined using a transient torque method from 1068 to 1132 K. The density result from this study is within 0.3% of the published data. However, the current viscosity result is approximately 30% lower than the existing data. The electrical conductivity of Hg(0.8)Cd(0.2)Te melt as a function of temperature, which is not available in the literature, is also determined. The analysis of the temperature dependent electrical conductivity and the relationship between the kinematic viscosity and density indicated that the structure of the melt appeared to be homogeneous when the temperature was above 1090 K. A structural transition occurred in the Hg(0.8)Cd(0.2)Te melt as the temperature was decreased to below 1090 K

  16. DNA origami metallized site specifically to form electrically conductive nanowires.

    Science.gov (United States)

    Pearson, Anthony C; Liu, Jianfei; Pound, Elisabeth; Uprety, Bibek; Woolley, Adam T; Davis, Robert C; Harb, John N

    2012-09-06

    DNA origami is a promising tool for use as a template in the design and fabrication of nanoscale structures. The ability to engineer selected staple strands on a DNA origami structure provides a high density of addressable locations across the structure. Here we report a method using site-specific attachment of gold nanoparticles to modified staple strands and subsequent metallization to fabricate conductive wires from DNA origami templates. We have modified DNA origami structures by lengthening each staple strand in select regions with a 10-base nucleotide sequence and have attached DNA-modified gold nanoparticles to the lengthened staple strands via complementary base-pairing. The high density of extended staple strands allowed the gold nanoparticles to pack tightly in the modified regions of the DNA origami, where the measured median gap size between neighboring particles was 4.1 nm. Gold metallization processes were optimized so that the attached gold nanoparticles grew until gaps between particles were filled and uniform continuous nanowires were formed. Finally, electron beam lithography was used to pattern electrodes in order to measure the electrical conductivity of metallized DNA origami, which showed an average resistance of 2.4 kΩ per metallized structure.

  17. Electrical conduction and dielectric studies of ZnO pellets

    Energy Technology Data Exchange (ETDEWEB)

    Chaari, Mariem, E-mail: m_chaari@yahoo.fr [Laboratory of Composite Ceramic and Polymer Materials (LaMaCoP), Scientific Faculty of Sfax, Route of the Soukra Km 4, Sfax 3038 (Tunisia); Matoussi, Adel [Laboratory of Composite Ceramic and Polymer Materials (LaMaCoP), Scientific Faculty of Sfax, Route of the Soukra Km 4, Sfax 3038 (Tunisia)

    2012-09-01

    A series of Zinc Oxide pellets sintered at different temperatures was studied by means of dielectric spectroscopy in the wide frequency range of 1-10{sup 6} Hz and temperature interval from -100 Degree-Sign C to 30 Degree-Sign C. Electrical conductivity was analysed using Jonsher's universal power law, and the values of s were found to decrease with the increase in temperature, which agrees well with the correlation barrier hopping (CBH) model. As the temperature increased, energy activation E{sub dc} became less than 0.39 eV and dc conductivity ({sigma}{sub dc}) values in the range of 1.9 Multiplication-Sign 10{sup -14}-9.7 Multiplication-Sign 10{sup -10} {Omega} m{sup -1} were observed. The dielectric modulus showed ionic polarisation at the intermediate and high frequencies related to oxygen interstitial O{sub i}, oxygen vacancy V{sub O} and Zinc interstitial Zn{sub i}. At low frequency, it revealed a Maxwell-Wagner-Sillars relaxation with barrier heights of grain boundaries between 0.74 and 0.88 eV for all the studied pellets.

  18. Direct-current vertical electrical-resistivity soundings in the Lower Peninsula of Michigan

    Science.gov (United States)

    Westjohn, D.B.; Carter, P.J.

    1989-01-01

    Ninety-three direct-current vertical electrical-resistivity soundings were conducted in the Lower Peninsula of Michigan from June through October 1987. These soundings were made to assist in mapping the depth to brine in areas where borehole resistivity logs and water-quality data are sparse or lacking. The Schlumberger array for placement of current and potential electrodes was used for each sounding. Vertical electrical-resistivity sounding field data, shifted and smoothed sounding data, and electric layers calculated using inverse modeling techniques are presented. Also included is a summary of the near-surface conditions and depths to conductors and resistors for each sounding location.

  19. Experimental Verification of Overlimiting Current by Surface Conduction and Electro-osmotic Flow in Microchannels

    CERN Document Server

    Nam, Sungmin; Heo, Joonseong; Lim, Geunbae; Bazant, Martin Z; Sung, Gunyong; Kim, Sung Jae

    2014-01-01

    Possible mechanisms of overlimiting current in unsupported electrolytes, exceeding diffusion limitation, have been intensely studied for their fundamental significance and applications to desalination, separations, sensing, and energy storage. In bulk membrane systems, the primary physical mechanism is electro-convection, driven by electro-osmotic instability on the membrane surface. It has recently been predicted that confinement by charged surfaces in microchannels or porous media favors two new mechanisms, electro-osmotic flow (EOF) and surface conduction (SC), driven by large electric fields in the depleted region acting on the electric double layers on the sidewalls. Here, we provide the first direct evidence for the transition from SC to EOF above a critical channel height, using in situ particle tracking and current-voltage measurements in a micro/nanofluidic device. The dependence of the over-limiting conductance on channel depth (d) is consistent with theoretical predictions, scaling as d^-1 for SC a...

  20. Electrically-conductive proppant and methods for making and using same

    Energy Technology Data Exchange (ETDEWEB)

    Cannan, Chad; Roper, Todd; Savoy, Steve; Mitchell, Daniel R.

    2016-09-06

    Electrically-conductive sintered, substantially round and spherical particles and methods for producing such electrically-conductive sintered, substantially round and spherical particles from an alumina-containing raw material. Methods for using such electrically-conductive sintered, substantially round and spherical particles in hydraulic fracturing operations.

  1. Electric Current Induced Light Emission from C60

    NARCIS (Netherlands)

    Palstra, T.T.M.; Haddon, R.C.; Lyons, K.B.

    1997-01-01

    We report the luminescence of C60 crystals and films due to the passage of an electrical current. The current-voltage behavior is highly non-linear with light-emission beyond a threshold voltage. The emission spectrum is featureless and resembles black-body radiation with an effective temperature on

  2. The problem of introducing an electrical current into liquid metal

    Energy Technology Data Exchange (ETDEWEB)

    Yavoyskiy, V.I.; Khanov, V.K.; Kovalev, P.I.; Povkh, I.L.

    1984-01-01

    The question of introducing an electrical current into a liquid metal by means of steel electrode plates mounted in the walls of groove fettling is examined. The contact between the electrodes and the liquid cast iron and steel was accomplished through openings in the fettling. The supply of current was accomplished through a circuit in which an electrical current, which traveled along the electrode downward and then through the openings in the fettling into the liquid metal, is fed to the upper part of the electrode. The results are of interest for studies of liquid metallic magnetohydrodynamic installations.

  3. Effects of physical properties on electrical conductivity of compacted lateritic soil

    Institute of Scientific and Technical Information of China (English)

    Wei Bai; Lingwei Kong; Aiguo Guo

    2013-01-01

    Natural soils of various types have different electrical properties due to the composition, structure, water content, and temperature. In order to investigate the electrical properties of lateritic soil, electrical con-ductivity experiments have been conducted on a self-developed testing device. Test results show that the electrical conductivity of laterite increases with the increase of water content, degree of saturation and dry density. When the water content is below the optimum water content, the electrical conductivity of soils increases nonlinearly and the variation rate increases dramatically. However, when the water content, degree of saturation, or dry density increases to a certain value, the electrical conductivity tends to be a constant. In addition, soil electrical conductivity increases with the increase of temperature, and it is observed that the electrical conductivity decreases with the increase of the number of wetting-drying cycles.

  4. Is Coronal X-ray Emission Energized By Electric Currents?

    Science.gov (United States)

    Ishibashi, Kazunori; Metcalf, T.; Lites, B.

    2007-05-01

    We examine the spatial correlation between coronal X-ray emission observed with the Hinode X-Ray Telescope and electric currents observed with the Hinode Solar Optical Telescope Spectro-polarimeter. We determine to what extent the X-ray brightness is correlated with electric current density and hence to what extent the hot corona is energized by electric currents which flow through the photosphere. We will also consider whether the currents reach the corona to heat the coronal plasma or whether they predominantly close below the corona. Hinode is an international project supported by JAXA, NASA, PPARC and ESA. We are grateful to the Hinode team for all their efforts in the design, development and operation of the mission.

  5. Global Electric Circuit Implications of Combined Aircraft Storm Electric Current Measurements and Satellite-Based Diurnal Lightning Statistics

    Science.gov (United States)

    Mach, Douglas M.; Blakeslee, Richard J.; Bateman, Monte G.

    2011-01-01

    Using rotating vane electric field mills and Gerdien capacitors, we measured the electric field profile and conductivity during 850 overflights of thunderstorms and electrified shower clouds (ESCs) spanning regions including the Southeastern United States, the Western Atlantic Ocean, the Gulf of Mexico, Central America and adjacent oceans, Central Brazil, and the South Pacific. The overflights include storms over land and ocean, and with positive and negative fields above the storms. Over three-quarters (78%) of the land storms had detectable lightning, while less than half (43%) of the oceanic storms had lightning. Integrating our electric field and conductivity data, we determined total conduction currents and flash rates for each overpass. With knowledge of the storm location (land or ocean) and type (with or without lightning), we determine the mean currents by location and type. The mean current for ocean thunderstorms is 1.7 A while the mean current for land thunderstorms is 1.0 A. The mean current for ocean ESCs 0.41 A and the mean current for land ESCs is 0.13 A. We did not find any significant regional or latitudinal based patterns in our total conduction currents. By combining the aircraft derived storm currents and flash rates with diurnal flash rate statistics derived from the Lightning Imaging Sensor (LIS) and Optical Transient Detector (OTD) low Earth orbiting satellites, we reproduce the diurnal variation in the global electric circuit (i.e., the Carnegie curve) to within 4% for all but two short periods of time. The agreement with the Carnegie curve was obtained without any tuning or adjustment of the satellite or aircraft data. Given our data and assumptions, mean contributions to the global electric circuit are 1.1 kA (land) and 0.7 kA (ocean) from thunderstorms, and 0.22 kA (ocean) and 0.04 (land) from ESCs, resulting in a mean total conduction current estimate for the global electric circuit of 2.0 kA. Mean storm counts are 1100 for land

  6. Investigation of properties of human epidermal membrane under constant conductance alternating current iontophoresis.

    Science.gov (United States)

    Zhu, Honggang; Peck, Kendall D; Miller, David J; Liddell, Mark R; Yan, Guang; Higuchi, William I; Li, S Kevin

    2003-04-14

    Previous studies in our laboratory have shown that enhanced, constant permeant fluxes across human skin can be achieved by applying an alternating current (AC) to maintain skin electrical conductance at a constant level. Relative to conventional direct current (DC) iontophoresis, for which current is maintained at a constant level, this newly developed constant conductance alternating current (CCAC) method achieves constant fluxes with less inter- and intra-sample variability. The present study focused upon further investigating the permeability properties of human skin during CCAC iontophoresis at a variety of target resistance/conductance values. A three-stage experimental protocol was used with flux measurements determined on 3 consecutive days. Stage I was an AC only protocol (symmetrical AC square-wave signal), stage II was an AC plus DC protocol (AC square-wave with DC offset voltage), and stage III was a repeat of stage I. During this three-stage protocol, the skin electrical resistance was maintained at a constant target value by manually adjusting the applied AC voltage. Radiolabeled mannitol and urea were model permeants in all experiments. Their fluxes were determined and used to characterize the permeability properties of human skin. The results from the present study established that: (i) the CCAC protocol made it possible to reduce HEM electrical resistance to different target levels as low as 0.8 kOmega cm(2) and maintain the specific resistance level throughout the flux experiment, (ii) permeant fluxes are proportional to skin electrical conductance, (iii) under the studied CCAC passive conditions, membrane pore size tends to increase as skin resistance decreases, and (iv) as the membrane breaks down, its pore sizes become larger.

  7. Effect of Electric Field on Conductivity and Vickers Hardness of an Al-Li Alloy

    Science.gov (United States)

    Liu, Bing; Chen, Da-Rong; Chen, Zheng; Wang, Yong-Xin; Li, Xiao-Ling

    2003-11-01

    Static electric fields were applied on an aluminium-lithium alloy during solution treatment. The conductivity and Vickers hardness of the quenched Al-Li alloy is changed with the effect of electric field. The Vickers hardness increases with the applied electric field for a certain solutionizing time but decreases with the time under an electric field. In the absence of the electric field, the Vickers hardness and the conductivity increase synchronously, while reversed after electric field treatment. Positive and negative electric fields had the similar effect. The change of the local electron density in alloy caused by electric field is presented to explain the effect.

  8. Effect of Electric Field on Conductivity and Vickers Hardness of an A1-Li Alloy

    Institute of Scientific and Technical Information of China (English)

    刘兵; 陈大融; 陈铮; 王永欣; 李晓玲

    2003-01-01

    Static electric fields were applied on an aluminium-lithium alloy during solution treatment.The conductivity and Vickers hardness of the quenched Al-Li alloy is changed with the effect of electric field.The Vickers hardness increases with the applied electric field for a certain solutionizing time but decreases with the time under an electric field.In the absence of the electric field,the Vickers hardness and the conductivity increase synchronously,while reversed after electric field treatment.Positive and negative electric fields had the similar effect.The change of the local electron density in alloy caused by electric field is presented to explain the effect.

  9. Review on Optical and Electrical Properties of Conducting Polymers

    Directory of Open Access Journals (Sweden)

    Manisha Bajpai

    2016-01-01

    Full Text Available We reviewed optical and electrical properties of conjugated polymers. The charge transport models to describe the hole and electron transport mechanism are also included in the electrical properties of conjugated polymers. The effect of optical and electrical properties after doping is also indexed in this paper.

  10. Electrical conduction and glass relaxation in alkali- silicate glasses

    Science.gov (United States)

    Angel, Paul William

    Electrical response measurements from 1 Hz to 1 MHz between 50o and 540oC were made on potassium, sodium and lithium-silicate glasses with low alkali oxide contents. Conductivity and electrical relaxation responses for both annealed and air quenched glasses of the same composition were compared. Quenching was found to lower the dc conductivity, σdc, and activation energy as well as increase the pre-exponential term when compared to the corresponding annealed glass of the same composition. All of the glasses exhibited Arrhenius behavior in the log σdc against 1/T plots. A sharp decrease in σdc was observed for glasses containing alkali concentrations of 7 mol% or less. The σdc activation energy exhibited similar behavior when plotted as a function of alkali composition and was explained in terms of a mixture of the weak and strong electrolyte models. The depression angle for fits to the complex impedance data were also measured as a function of thermal history, alkali concentration and alkali species. These results were interpreted in terms of changes in the distribution of relaxation times. Annealed samples from a single melt of a 10 mol% K2O-90SiO2 glass were reheated to temperatures ranging from 450o to 800oC, held isothermally for 20 min, and then quenched in either air or silicon oil. The complex impedance of both an annealed and the quenched samples were then measured as a function of temperature from 120o to 250oC. The σdc was found to be remain unaffected by heat treatments below 450oC, to increase rapidly over an approximate 200oC range of temperatures that was dependent on cooling rate and to be constant for heat treatments above this range. This behavior is interpreted in terms of the mean structural relaxation time as a function of temperature and cooling rate near the glass transition temperature and glass transformation ranges. A more detailed definition for the transition and transformation temperatures and ranges was also provided.

  11. Rethinking Sediment Biogeochemistry After the Discovery of Electric Currents

    DEFF Research Database (Denmark)

    Nielsen, Lars Peter; Risgaard-Petersen, Nils

    2015-01-01

    of the oxygen consumption. In addition, it implies a separation of strong proton generators and consumers and the formation of measurable electric fields, which have several effects on mineral development and ion migration. This article reviews the work on electric currents and cable bacteria published through......The discovery of electric currents in marine sediments arose from a simple observation that conventional biogeochemistry could not explain: Sulfide oxidation in one place is closely coupled to oxygen reduction in another place, centimeters away. After experiments demonstrated that this resulted...... from electric coupling, the conductors were found to be long, multicellular, filamentous bacteria, now known as cable bacteria. The spatial separation of oxidation and reduction processes by these bacteria represents a shortcut in the conventional cascade of redox processes and may drive most...

  12. Rethinking sediment biogeochemistry after the discovery of electric currents.

    Science.gov (United States)

    Nielsen, Lars Peter; Risgaard-Petersen, Nils

    2015-01-01

    The discovery of electric currents in marine sediments arose from a simple observation that conventional biogeochemistry could not explain: Sulfide oxidation in one place is closely coupled to oxygen reduction in another place, centimeters away. After experiments demonstrated that this resulted from electric coupling, the conductors were found to be long, multicellular, filamentous bacteria, now known as cable bacteria. The spatial separation of oxidation and reduction processes by these bacteria represents a shortcut in the conventional cascade of redox processes and may drive most of the oxygen consumption. In addition, it implies a separation of strong proton generators and consumers and the formation of measurable electric fields, which have several effects on mineral development and ion migration. This article reviews the work on electric currents and cable bacteria published through April 2014, with an emphasis on general trends, thought-provoking consequences, and new questions to address.

  13. Electric-field conditions for Landauer and Boltzmann-Drude conductance equations

    Science.gov (United States)

    Fenton, E. W.

    1992-08-01

    It is shown explicitly in a unified theory of conductance, for bulk metals and mesoscopic systems, that a Landauer type of conductance equation is compatible with a spatially localized continuous-q-spectrum electric field that is unidirectional, but not with a homogeneous q=0 field. The reverse field condition holds for the Boltzmann-Drude conductance equation for an inhomogeneous bulk metal that has no inelastic scattering. A Feynman-diagram form of Green-function theory shows explicitly the virtual processes and repeated quantum scattering from a single object that occur with Feynman path integrals. The distinction between repeated scattering of current and repeated one-electron scattering is important. For a mesoscopic system, infinite conduction would occur if scattering were to be exactly zero-there is no necessity for postulated contact potentials between lead wires and thermal reservoirs. This is because just in this translationally invariant case a q=0 electric field must occur, and for this the Landauer equation must be replaced by the Boltzmann-Drude equation with zero scattering. In contrast to the strong frequency dependence of the Boltzmann-Drude equation, it is shown that no frequency dependence of the conductance occurs in the Landauer type of equation for frequencies much smaller than the inverse of the electron transit time across the electric-field region.

  14. Conducting and electrical contact materials; Materiaux conducteurs et de contact electrique

    Energy Technology Data Exchange (ETDEWEB)

    Fechant, L.; Tixador, P.

    2003-07-01

    This book deals with conducting materials, mainly for applications where their behaviour is strongly temperature dependent. This category of materials includes the electrical contact materials and the composites with strong positive temperature coefficient (PTC). All these materials play a very important and fundamental role in practically all electrical materials, from machines to devices. Their knowledge is thus of prime importance. The fundamental aspects of these materials are analyzed and some devices are described. The first part is devoted to basic notions of conductivity (electrical and thermal). The second part deals with pure metals and alloys and with composite materials used in electrical contacts (contact resistance, thermal stability of contact striction, contacts during current overload, effects of electrical arcs on contacts). Finally, the charged polymers with PTC effect, the different materials used in PTC effect composites and their manufacturing are presented (phenomenological approach of the PTC behaviour of charged polymers, materials involved and their preparation, simplified model of the electro-thermal behaviour of the component, limitation and application of PTC components). (J.S.)

  15. Conductor of high electrical current at high temperature in oxygen and liquid metal environment

    Energy Technology Data Exchange (ETDEWEB)

    Powell, IV, Adam Clayton; Pati, Soobhankar; Derezinski, Stephen Joseph; Lau, Garrett; Pal, Uday B.; Guan, Xiaofei; Gopalan, Srikanth

    2016-01-12

    In one aspect, the present invention is directed to apparatuses for and methods of conducting electrical current in an oxygen and liquid metal environment. In another aspect, the invention relates to methods for production of metals from their oxides comprising providing a cathode in electrical contact with a molten electrolyte, providing a liquid metal anode separated from the cathode and the molten electrolyte by a solid oxygen ion conducting membrane, providing a current collector at the anode, and establishing a potential between the cathode and the anode.

  16. Some aspects of electrical conduction in granular systems of various dimensions.

    Science.gov (United States)

    Creyssels, M; Dorbolo, S; Merlen, A; Laroche, C; Castaing, B; Falcon, E

    2007-07-01

    We report on measurements of the electrical conductivity in both a 2D triangular lattice of metallic beads and in a chain of beads. The voltage/current characteristics are qualitatively similar in both experiments. At low applied current, the voltage is found to increase logarithmically in good agreement with a model of widely distributed resistances in series. At high enough current, the voltage saturates due to the local welding of microcontacts between beads. The frequency dependence of the saturation voltage gives an estimate of the size of these welded microcontacts. The DC value of the saturation voltage ( approximately 0.4 V per contact) gives an indirect measure of the number of welded contact carrying the current within the 2D lattice. Also, a new measurement technique provides a map of the current paths within the 2D lattice of beads. For an isotropic compression of the 2D granular medium, the current paths are localized in few discrete linear paths. This quasi-one-dimensional nature of the electrical conductivity thus explains the similarity between the characteristics in the 1D and 2D systems.

  17. Some aspects of electrical conduction in granular systems of various dimensions

    Science.gov (United States)

    Creyssels, M.; Dorbolo, S.; Merlen, A.; Laroche, C.; Castaing, B.; Falcon, E.

    2007-07-01

    We report on measurements of the electrical conductivity in both a 2D triangular lattice of metallic beads and in a chain of beads. The voltage/current characteristics are qualitatively similar in both experiments. At low applied current, the voltage is found to increase logarithmically in good agreement with a model of widely distributed resistances in series. At high enough current, the voltage saturates due to the local welding of microcontacts between beads. The frequency dependence of the saturation voltage gives an estimate of the size of these welded microcontacts. The DC value of the saturation voltage ( ≃ 0.4 V per contact) gives an indirect measure of the number of welded contact carrying the current within the 2D lattice. Also, a new measurement technique provides a map of the current paths within the 2D lattice of beads. For an isotropic compression of the 2D granular medium, the current paths are localized in few discrete linear paths. This quasi-onedimensional nature of the electrical conductivity thus explains the similarity between the characteristics in the 1D and 2D systems.

  18. Low Voltage Electric Current Causing Ileal Perforation: A Rare Injury

    Science.gov (United States)

    Mathur, Vinay; Tanger, Ramesh; Gupta, Arun Kumar

    2016-01-01

    Post-electric burn ileal perforation is a rare but severe complication leading to high morbidity and mortality if there is delay in diagnosis and management. We are describing a case of electric current injury of left forearm, chest, and abdominal wall with perforation of ileum in an 8-year old boy. Patient was successfully managed by primary closure of the ileal perforation. PMID:27170922

  19. Low Voltage Electric Current Causing Ileal Perforation: A Rare Injury

    Directory of Open Access Journals (Sweden)

    Aditya Pratap Singh

    2016-04-01

    Full Text Available Post-electric burn ileal perforation is a rare but severe complication leading to high morbidity and mortality if there is delay in diagnosis and management. We are describing a case of electric current injury of left forearm, chest, and abdominal wall with perforation of ileum in an 8-year old boy. Patient was successfully managed by primary closure of the ileal perforation.

  20. Suppression of ion conductance by electro-osmotic flow in nano-channels with weakly overlapping electrical double layers

    Science.gov (United States)

    Liu, Yang; Guo, Lingzi; Zhu, Xin; Ran, Qiushi; Dutton, Robert

    2016-08-01

    This theoretical study investigates the nonlinear ionic current-voltage characteristics of nano-channels that have weakly overlapping electrical double layers. Numerical simulations as well as a 1-D mathematical model are developed to reveal that the electro-osmotic flow (EOF) interplays with the concentration-polarization process and depletes the ion concentration inside the channels, thus significantly suppressing the channel conductance. The conductance may be restored at high electrical biases in the presence of recirculating vortices within the channels. As a result of the EOF-driven ion depletion, a limiting-conductance behavior is identified, which is intrinsically different from the classical limiting-current behavior.

  1. Suppression of ion conductance by electro-osmotic flow in nano-channels with weakly overlapping electrical double layers

    Directory of Open Access Journals (Sweden)

    Yang Liu

    2016-08-01

    Full Text Available This theoretical study investigates the nonlinear ionic current-voltage characteristics of nano-channels that have weakly overlapping electrical double layers. Numerical simulations as well as a 1-D mathematical model are developed to reveal that the electro-osmotic flow (EOF interplays with the concentration-polarization process and depletes the ion concentration inside the channels, thus significantly suppressing the channel conductance. The conductance may be restored at high electrical biases in the presence of recirculating vortices within the channels. As a result of the EOF-driven ion depletion, a limiting-conductance behavior is identified, which is intrinsically different from the classical limiting-current behavior.

  2. New method for solving inductive electric fields in the non-uniformly conducting ionosphere

    Directory of Open Access Journals (Sweden)

    H. Vanhamäki

    2006-10-01

    Full Text Available We present a new calculation method for solving inductive electric fields in the ionosphere. The time series of the potential part of the ionospheric electric field, together with the Hall and Pedersen conductances serves as the input to this method. The output is the time series of the induced rotational part of the ionospheric electric field. The calculation method works in the time-domain and can be used with non-uniform, time-dependent conductances. In addition, no particular symmetry requirements are imposed on the input potential electric field. The presented method makes use of special non-local vector basis functions called the Cartesian Elementary Current Systems (CECS. This vector basis offers a convenient way of representing curl-free and divergence-free parts of 2-dimensional vector fields and makes it possible to solve the induction problem using simple linear algebra. The new calculation method is validated by comparing it with previously published results for Alfvén wave reflection from a uniformly conducting ionosphere.

  3. New method for solving inductive electric fields in the non-uniformly conducting ionosphere

    Science.gov (United States)

    Vanhamäki, H.; Amm, O.; Viljanen, A.

    2006-10-01

    We present a new calculation method for solving inductive electric fields in the ionosphere. The time series of the potential part of the ionospheric electric field, together with the Hall and Pedersen conductances serves as the input to this method. The output is the time series of the induced rotational part of the ionospheric electric field. The calculation method works in the time-domain and can be used with non-uniform, time-dependent conductances. In addition, no particular symmetry requirements are imposed on the input potential electric field. The presented method makes use of special non-local vector basis functions called the Cartesian Elementary Current Systems (CECS). This vector basis offers a convenient way of representing curl-free and divergence-free parts of 2-dimensional vector fields and makes it possible to solve the induction problem using simple linear algebra. The new calculation method is validated by comparing it with previously published results for Alfvén wave reflection from a uniformly conducting ionosphere.

  4. Electrical conductivity anisotropy of partially molten peridotite under shear deformation

    Science.gov (United States)

    Zhang, B.; Yoshino, T.; Yamazaki, D.; Manthilake, G. M.; Katsura, T.

    2013-12-01

    Recent ocean bottom magnetotelluric investigations have revealed a high-conductivity layer (HCL) with high anisotropy characterized by higher conductivity values in the direction parallel to the plate motion beneath the southern East Pacific Rise (Evans et al., 2005) and beneath the edge of the Cocos plate at the Middle America trench offshore of Nicaragua (Naif et al., 2013). These geophysical observations have been attributed to either hydration (water) of mantle minerals or the presence of partial melt. Currently, aligned partial melt has been regarded as the most preferable candidate for explaining the conductivity anisotropy because of the implausibility of proton conduction (Yoshino et al., 2006). In this study, we report development of the conductivity anisotropy between parallel and normal to shear direction on the shear plane in partial molten peridotite as a function of time and shear strain. Starting samples were pre-synthesized partial molten peridotite, showing homogeneous melt distribution. The partially molten peridotite samples were deformed in simple shear geometry at 1 GPa and 1723 K in a DIA-type apparatus with uniaxial deformation facility. Conductivity difference between parallel and normal to shear direction reached one order, which is equivalent to that observed beneath asthenosphere. In contrast, such anisotropic behavior was not found in the melt-free samples, suggesting that development of the conductivity anisotropy was generated under shear stress. Microstructure of the deformed partial molten peridotite shows partial melt tends to preferentially locate grain boundaries parallel to shear direction, and forms continuously thin melt layer sub-parallel to the shear direction, whereas apparently isolated distribution was observed on the section perpendicular to the shear direction. The resultant melt morphology can be approximated by tube like geometry parallel to the shear direction. This observation suggests that the development of

  5. Electrical conduction mechanism in ZnS nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Hassan [Micro and Nano Devices Group, Department of Metallurgy and Materials Engineering, Pakistan Institute of Engineering and Applied Sciences, Nilore 45650, Islamabad (Pakistan); Karim, S. [Nanomaterials Research Group, Physics Division, PINSTECH, Nilore 45650, Islamabad (Pakistan); Rafiq, M.A. [Micro and Nano Devices Group, Department of Metallurgy and Materials Engineering, Pakistan Institute of Engineering and Applied Sciences, Nilore 45650, Islamabad (Pakistan); Maaz, K., E-mail: maaz@impcas.ac.cn [Nanomaterials Research Group, Physics Division, PINSTECH, Nilore 45650, Islamabad (Pakistan); Rahman, Atta ur [Material Laboratory, Department of Physics, Abul Wali Khan University, Mardan, Khyber Pakhtunkhwa (Pakistan); Nisar, A.; Ahmad, M. [Nanomaterials Research Group, Physics Division, PINSTECH, Nilore 45650, Islamabad (Pakistan)

    2014-11-05

    Highlights: • ZnS nanoparticles have been prepared by coprecipitation route with diameter of 20 nm. • The bandgap energy shows small shift as compared to the bulk value of ZnS. • This is explained by weak quantum confinement effects resulted from the quantization of exciton motion. • The photoluminescence spectrum shows two peaks that are assigned to the recombination of electrons and holes. • And to the transitions of electrons from the sulfur to zinc vacancy states. - Abstract: ZnS nanoparticles with hexagonal wurtzite crystal structure have been prepared by coprecipitation method at 70 °C and subsequently annealed at 400 °C for 4 h. The average particle size has been found to be ∼20 nm. ZnS nanopowder has been characterized by UV–Vis spectrophotometry. The band gap has been calculated in the range of 3.9 eV. Impedance spectroscopic technique has been used to examine the electrical properties of ZnS nanoparticles pressed to pellet form in the temperature range of 300–400 K. Correlated barrier hopping has been the prevailing conduction mechanism in ZnS. The activation energy calculated from the Arrhenius relation is consistent with bipolaron and single polaron hopping in correlated barrier hopping model.

  6. Highly Electrically Conducting Glass-Graphene Nanoplatelets Hybrid Coatings.

    Science.gov (United States)

    Garcia, E; Nistal, A; Khalifa, A; Essa, Y; Martín de la Escalera, F; Osendi, M I; Miranzo, P

    2015-08-19

    Hybrid coatings consisting of a heat resistant Y2O3-Al2O3-SiO2 (YAS) glass containing 2.3 wt % of graphene nanoplatelets (GNPs) were developed by flame spraying homogeneous ceramic powders-GNP granules. Around 40% of the GNPs survived the high spraying temperatures and were distributed along the splat-interfaces, forming a percolated network. These YAS-GNP coatings are potentially interesting in thermal protection systems and electromagnetic interference shields for aerospace applications; therefore silicon carbide (SiC) materials at the forefront of those applications were employed as substrates. Whereas the YAS coatings are nonconductive, the YAS-GNP coatings showed in-plane electrical conductivity (∼10(2) S·m(-1)) for which a low percolation limit (below 3.6 vol %) is inferred. Indentation tests revealed the formation of a highly damaged indentation zone showing multiple shear displacements between adjacent splats probably favored by the graphene sheets location. The indentation radial cracks typically found in brittle glass coatings are not detected in the hybrid coatings that are also more compliant.

  7. Electrical conductivity of milk: ability to predict mastitis status.

    Science.gov (United States)

    Norberg, E; Hogeveen, H; Korsgaard, I R; Friggens, N C; Sloth, K H M N; Løvendahl, P

    2004-04-01

    Electrical conductivity (EC) of milk has been introduced as an indicator trait for mastitis over the last decade, and it may be considered as a potential trait in a breeding program where selection for improved udder health is included. In this study, various EC traits were investigated for their association with udder health. In total, 322 cows with 549 lactations were included in the study. Cows were classified as healthy or clinically or subclinically infected, and EC was measured repeatedly during milking on each quarter. Four EC traits were defined; the inter-quarter ratio (IQR) between the highest and lowest quarter EC values, the maximum EC level for a cow, IQR between the highest and lowest quarter EC variation, and the maximum EC variation for a cow. Values for the traits were calculated for every milking throughout the entire lactation. All EC traits increased significantly (P < 0.001) when cows were subclinically or clinically infected. A simple threshold test and discriminant function analysis was used to validate the ability of the EC traits to distinguish between cows in different health groups. Traits reflecting the level rather than variation of EC, and in particular the IQR, performed best to classify cows correctly. By using this trait, 80.6% of clinical and 45.0% of subclinical cases were classified correctly. Of the cows classified as healthy, 74.8% were classified correctly. However, some extra information about udder health status was obtained when a combination of EC traits was used.

  8. Electrical properties of CdTe/CdS solar cells investigated with conductive atomic force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Moutinho, H.R. [National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401 (United States)]. E-mail: helio_moutinho@nrel.gov; Dhere, R.G. [National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401 (United States); Jiang, C.-S. [National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401 (United States); Al-Jassim, M.M. [National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401 (United States); Kazmerski, L.L. [National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401 (United States)

    2006-08-30

    We report on the application of conductive atomic force microscopy (C-AFM) for studying the electrical properties of CdTe/CdS solar cells, and discuss the advantages and limitations of this technique. C-AFM is a new technique that uses the tip of an AFM to apply a potential between the tip and the sample, resulting in high spatial-resolution current images, as well as current versus voltage curves. The analyses were made before and after the standard vapor CdCl{sub 2} treatment, as well as two etching processes, using solutions of bromine/methanol and nitric-phosphoric acids. The current images from the untreated and CdCl{sub 2}-treated samples showed grains with different contrasts, due to differences in electrical conductivity or a nonuniform surface. The bromine/methanol etch resulted in more conductive grain boundaries as compared to intragrain material, while the nitric/phosphoric etch increased the conductivity of the whole film close to the surface and resulted in films with significant photocurrent.

  9. Electrical conductivity of hadronic matter from different possible mesonic and baryonic thermal fluctuations

    CERN Document Server

    Ghosh, Sabyasachi

    2016-01-01

    Electromagnetic current-current correlators in pionic and nucleonic medium have been evaluated in the static limit to obtain electrical conductivities for pion and nucleon components respectively, where former decreases and latter one increases with the variation of temperature $T$ and baryon chemical potential $\\mu_N$. Therefore, total electrical conductivity of pion and nucleon system exhibits a valley structure in the $T$-$\\mu_N$ plane. To get non-divergent and finite values of correlators, finite thermal widths of medium constituents, pion and nucleon have been considered, where these thermal widths have been determined from the in-medium scattering probabilities of pion and nucleon with other mesonic and baryonic resonances, based on effective hadronic model. At $\\mu_N=0$, the results of present work are more or less agrees with the results of earlier works and its finite $\\mu_N$ extension show a decreasing nature of electrical conductivity for hadronic medium during spanning from freeze out line to quar...

  10. Enhanced Electrical Conductivity of Aluminum by Carbon Nanotube Hybrid Dilution

    Science.gov (United States)

    Stigers, Shelby; Savadelis, Alexader; Carruba, Kathryn; Johns, Kiley; Adu, Kofi

    2015-03-01

    Carbon nanotubes (CNTs) have been recognized as potential candidate for reinforcements in lightweight metals. A composite consisting of CNTs embedded in an Al-matrix might work as an ultra-low-resistive material with the potential of having a room-temperature resistivity far below Al, Cu and Ag. While several advances have been made in developing Al-CNT composites, three major challenges: (1) interfacial bond strength between CNT and the Al matrix, (2) homogeneous dispersion of the CNTs in the Al matrix and impurity (CNTs) scattering centers, continue to limit progress in Al-CNT composites. Several conventional methods including powder metallurgy, melting and solidification, thermal spray and electrochemical deposition have been used to process Al and CNT to form composites. We present preliminary results that address these challenges and demonstrate the fabrication of easily drawable Al-CNT composites into wires of diameter <= 1.0mm with ~ 18% +/- 2% reduction in the electrical resistivity of Al-CNT composite using CNT-hybrid as reinforcement and an inductive melting technique that takes advantage of the induced eddy current in the melt to provide in-situ stirring. This Work is Supported by Penn State Altoona Undergraduate Research Sponsored Program and Penn State Materials Research Institute, University Park.

  11. Illuminating the electrical conductivity of the lowermost mantle from below

    Science.gov (United States)

    Jault, Dominique

    2015-07-01

    The magnetic field that originates in the earth's core is transformed across the electrically conducting mantle before being observed, at the earth's surface or above. Assuming that the conductivity depends only on radius, it has been customary to treat the mantle as a linear time-invariant filter for the core magnetic field, with properties (as a function of the frequency ω) specified by the transfer function Γ(ω). An high-frequency approximation to Γ(ω), which is derived from a three terms WKBJ expansion with ω-1/2 as small parameter, is found here to reproduce adequately, for low harmonic degrees and/or thin conducting layers, the exact solution, which is evaluated numerically. It is contrasted with the low-frequency estimation of Γ, which consists in a perturbation procedure and in writing Γ(ω) as a series in powers of ω (ω → 0). The low-frequency theory is applied to the magnetic variations produced by the geostrophic core flows with about 6 yr period as the phase of these flows is independently determined from their effect on the length of the day. Apart from that, the low-frequency approximation overestimates the screening by the mantle of high-frequency signals, especially the low harmonic degree ones. In practice, the attenuating factor defined from the O(ω2) term in the expansion of Γ as ω → 0 cannot be retrieved from analyses of geomagnetic time-series. Application of the mantle filter theory hinges on our knowledge about the time spectrum of the magnetic field at the core surface. The low-frequency theory had been previously applied to observatory series on the assumption that geomagnetic jerks occurring in the core are rare and isolated events. Rather than following up these earlier studies, I note that the spectral density function for the second time derivative of the main magnetic field coefficients is approximately independent of ω in a frequency range for which the mantle has undoubtedly negligible influence. In the absence of

  12. STUDY OF THE ELECTRICAL CONDUCTIVITY OF GRAPHITE FELT EMPLOYED AS A POROUS ELECTRODE

    Directory of Open Access Journals (Sweden)

    E.O. Vilar

    1998-09-01

    Full Text Available The objective of the present work is to study the variation of the electrode distribution potential under electrical conductivity variation of graphite felt RVG 4000 ( Le Carbone Lorraine when submitted to a mechanical compression. Experimental and theoretical studies show that this electrical conductivity variation can changes the electrode potential distribution E(x working under limiting current conditions. This may occur when graphite felt is confined in an electrochemical reactor compartment or simply when it is submitted to a force performed by an electrolyte percolation in a turbulent flow. This investigation can contribute to the improvement of electrochemical cells that may use this material as an electrode. Finally, one modification is suggested in the equation that gives the electrode potential distribution E(x - E(0. In this case the parameter L (thickness in metal porous electrodes is substituted for Lf = Li (1-j, where j corresponds to the reduction factor of the initial thickness Li.

  13. $U(1)$ current from the AdS/CFT: diffusion, conductivity and causality

    CERN Document Server

    Bu, Yanyan; Sharon, Amir

    2015-01-01

    For a holographically defined finite temperature theory, we derive an off-shell constitutive relation for a global $U(1)$ current driven by a weak external non-dynamical electromagnetic field. The constitutive relation involves an all order gradient expansion resummed into three momenta-dependent transport coefficient functions: diffusion, electric conductivity, and "magnetic" conductivity. These transport functions are first computed analytically in the hydrodynamic limit, up to third order in the derivative expansion, and then numerically for generic values of momenta. We also compute a diffusion memory function, which, as a result of all order gradient resummation, is found to be causal.

  14. Experimental study on directional solidification of Al-Si alloys under the influence of electric currents

    Science.gov (United States)

    Räbiger, D.; Zhang, Y.; Galindo, V.; Franke, S.; Willers, B.; Eckert, S.

    2016-07-01

    The application of electric currents during solidification can cause grain refinement in metallic alloys. However, the knowledge about the mechanisms underlying the decrease in grain size remains fragmentary. This study considers the solidification of Al-Si alloys under the influence of electric currents for the configuration of two parallel electrodes at the free surface. Solidification experiments were performed under the influence of both direct currents (DC) and rectangular electric current pulses (ECP). The interaction between the applied current and its own induced magnetic field causes a Lorentz force which produces an electro-vortex flow. Numerical simulations were conducted to calculate the Lorentz force, the Joule heating and the induced melt flow. The numerical predictions were confirmed by isothermal flow measurements in eutectic GaInSn. The results demonstrate that the grain refining effect observed in our experiments can be ascribed solely to the forced melt flow driven by the Lorentz force.

  15. Well-posedness of the conductivity reconstruction from an interior current density in terms of Schauder theory

    KAUST Repository

    Kim, Yong-Jung

    2015-06-23

    We show the well-posedness of the conductivity image reconstruction problem with a single set of interior electrical current data and boundary conductivity data. Isotropic conductivity is considered in two space dimensions. Uniqueness for similar conductivity reconstruction problems has been known for several cases. However, the existence and the stability are obtained in this paper for the first time. The main tool of the proof is the method of characteristics of a related curl equation.

  16. Gum ghatti based novel electrically conductive biomaterials: A study of conductivity and surface morphology

    Directory of Open Access Journals (Sweden)

    S. Kalia

    2014-04-01

    Full Text Available Gum ghatti-cl-poly(acrylamide-aniline interpenetrating network (IPN was synthesized by a two-step aqueous polymerization method, in which aniline monomer was absorbed into the network of gum ghatti-cl-poly(acrylamide and followed by a polymerization reaction between aniline monomers. Initially, semi-IPN based on acrylamide and gum ghatti was prepared by free-radical copolymerization in aqueous media with optimized process parameters, using N,N'-methylenebis-acrylamide, as cross-linker and ammonium persulfate, as an initiator system. Optimum reaction conditions affording maximum percentage swelling were: solvent [mL] =12, Acrylamide (AAm [mol•L–1] = 1.971, Ammonium peroxydisulfate (APS [mol•L–1] = 0.131•10–1, N,N'-methylene-bis-acrylamide (MBA [mol•L–1] = 0.162•10–1, reaction time [min] = 210, temperature [°C] = 100 and pH = 7.0. The resulting IPN was doped with different protonic acids. The effect of the doping has been investigated on the conductivity and surface morphology of the IPN hydrogel. The maximum conductivity was observed with 1.5N HClO4 concentration. The morphological, structural and electrical properties of the candidate polymers were studied using scanning electron micrscopy (SEM, Fourier transform infrared spectroscopy FTIR and two-probe method, respectively.

  17. Electrical conductivity and dielectric relaxation of 2-(antipyrin-4-ylhydrazono)-2-(4-nitrophenyl)acetonitrile

    Energy Technology Data Exchange (ETDEWEB)

    El-Menyawy, E.M., E-mail: emad_elmenyawy@yahoo.com [Solid State Electronics Laboratory, Solid State Physics Department, Physics Division, National Research Center, Dokki, Cairo 12311 (Egypt); Zedan, I.T. [Basic Science Department, High Institute of Engineering and Technology, El-Arish, North Sinai (Egypt); Nawar, H.H. [Department of Chemistry, Faculty of Education, Al Jabal Al Gharbi University (Libya)

    2014-03-15

    The electrical and dielectric properties of the synthesized 2-(antipyrin-4-ylhydrazono)-2-(4-nitrophenyl)acetonitrile (AHNA) have been studied. The direct and alternating current (DC and AC) conductivities and complex dielectric constant were investigated in temperature range 303–403 K. The AC conductivity and dielectric properties of AHNA were investigated over frequency range 100 Hz–5 MHz. From DC and AC measurements, electrical conduction is found to be a thermally activated process. The frequency-dependent AC conductivity obeys Jonscher's universal power law in which the frequency exponent decreases with increasing temperature. The correlated barrier hopping (CBH) is the predominant model for describing the charge carrier transport in which the electrical parameters are evaluated. The activation energy is found to decrease with increasing frequency. The behaviors of dielectric and dielectric loss are discussed in terms of a polarization mechanism. The dielectric loss shows frequency power law from which the maximum barrier height is determined as 0.19 eV in terms of the Guintini model.

  18. DISTRIBUTION OF ELECTRIC CURRENTS IN SOLAR ACTIVE REGIONS

    Energy Technology Data Exchange (ETDEWEB)

    Török, T.; Titov, V. S.; Mikić, Z. [Predictive Science, Inc., 9990 Mesa Rim Road, Suite 170, San Diego, CA 92121 (United States); Leake, J. E. [College of Science, George Mason University, 4400 University Drive, Fairfax, VA 22030 (United States); Archontis, V. [School of Mathematics and Statistics, University of St. Andrews, North Haugh, St. Andrews, Fife KY16 9SS (United Kingdom); Linton, M. G. [U.S. Naval Research Lab, 4555 Overlook Avenue, SW Washington, DC 20375 (United States); Dalmasse, K.; Aulanier, G. [LESIA, Observatoire de Paris, CNRS, UPMC, Univ. Paris Diderot, 5 place Jules Janssen, F-92190 Meudon (France); Kliem, B. [Institut für Physik und Astronomie, Universität Potsdam, Karl-Liebknecht-Str. 24-25, D-14476 Potsdam (Germany)

    2014-02-10

    There has been a long-standing debate on the question of whether or not electric currents in solar active regions are neutralized. That is, whether or not the main (or direct) coronal currents connecting the active region polarities are surrounded by shielding (or return) currents of equal total value and opposite direction. Both theory and observations are not yet fully conclusive regarding this question, and numerical simulations have, surprisingly, barely been used to address it. Here we quantify the evolution of electric currents during the formation of a bipolar active region by considering a three-dimensional magnetohydrodynamic simulation of the emergence of a sub-photospheric, current-neutralized magnetic flux rope into the solar atmosphere. We find that a strong deviation from current neutralization develops simultaneously with the onset of significant flux emergence into the corona, accompanied by the development of substantial magnetic shear along the active region's polarity inversion line. After the region has formed and flux emergence has ceased, the strong magnetic fields in the region's center are connected solely by direct currents, and the total direct current is several times larger than the total return current. These results suggest that active regions, the main sources of coronal mass ejections and flares, are born with substantial net currents, in agreement with recent observations. Furthermore, they support eruption models that employ pre-eruption magnetic fields containing such currents.

  19. Current amplification models of sensorineurall and conductive hearing loss

    Directory of Open Access Journals (Sweden)

    Ostojić Sanja

    2012-01-01

    Full Text Available The main function of a hearing aid is to improve auditory and language abilities of hearing impaired users. The amplification model has to be adapted according to age, degree and type of hearing loss. The goal of this paper is to analyze the current amplification models of sensorineural and conductive hearing loss which can provide a high quality of speech perception and sounds at any degree of hearing loss. The BAHA is a surgically implantable system for treatment of conductive hearing loss that works through direct bone conduction. BAHA is used to help people with chronic ear infections, congenital external auditory canal atresia and single sided deafness who cannot benefit from conventional hearing aids. The last generation of hearing aid for sensorineural hearing loss is cochlear implant. Bimodal amplification improves binaural hearing. Hearing aids alone do not make listening easier in all situations. The things that can interfere with listening are background noises, distance from a sound and reverberation or echo. The device used most often today is the Frequency Modulated (FM system.

  20. 76 FR 70122 - Plan for Conduct of 2012 Electric Transmission Congestion Study

    Science.gov (United States)

    2011-11-10

    ... Regional Entity (TRE), and the Western Electricity Coordinating Council. In preparing the 2009 Congestion... additions. These sources may include, but are not limited to: ] Electricity market analyses, including... for Conduct of 2012 Electric Transmission Congestion Study AGENCY: Office of Electricity Delivery...

  1. Engineering the Electrical Conductivity of Lamellar Silver-Doped Cobalt(II) Selenide Nanobelts for Enhanced Oxygen Evolution.

    Science.gov (United States)

    Zhao, Xu; Zhang, Hantao; Yan, Yu; Cao, Jinhua; Li, Xingqi; Zhou, Shiming; Peng, Zhenmeng; Zeng, Jie

    2017-01-02

    Precisely engineering the electrical conductivity represents a promising strategy to design efficient catalysts towards oxygen evolution reaction (OER). Here, we demonstrate a versatile partial cation exchange method to fabricate lamellar Ag-CoSe2 nanobelts with controllable conductivity. The electrical conductivity of the materials was significantly enhanced by the addition of Ag(+) cations of less than 1.0 %. Moreover, such a trace amount of Ag induced a negligible loss of active sites which was compensated through the effective generation of active sites as shown by the excellent conductivity. Both the enhanced conductivity and the retained active sites contributed to the remarkable electrocatalytic performance of the Ag-CoSe2 nanobelts. Relative to the CoSe2 nanobelts, the as-prepared Ag-CoSe2 nanobelts exhibited a higher current density and a lower Tafel slope towards OER. This strategy represents a rational design of efficient electrocatalysts through finely tuning their electrical conductivities.

  2. Transcardiac conducted electrical weapon (TASER) probe deployments: incidence and outcomes.

    Science.gov (United States)

    Bozeman, William P; Teacher, Eric; Winslow, James E

    2012-12-01

    TASER (TASER International, Scottsdale, AZ) conducted electrical weapons (CEWs) are commonly used by law enforcement officers. Although animal studies have suggested that transcardiac CEW discharges may produce direct cardiac effects, this has not been demonstrated in human studies. This study sought to determine the incidence and outcomes of transcardiac CEW probe impact locations in a large series of actual CEW deployments. A multi-center database of consecutive CEW uses by law enforcement officers was retrospectively reviewed. Case report forms were independently reviewed by three investigators to identify cases with paired probe configurations potentially producing a transcardiac discharge vector. Descriptive analysis was performed and inter-rater reliability was assessed. Among 1201 total CEW uses, 813 included probe deployments and 178 cases had paired anterior probe impacts potentially capable of producing a transcardiac discharge vector. This represents 14.8% of all CEW uses (95% confidence interval [CI] 12.9-16.9%) and 21.9% of CEW uses in probe mode (95% CI 19.1-24.9%). Inter-rater agreement was very good, with kappa = 0.82. There were no immediate deaths in any cases (97.5% CI 0.0-0.3%) to suggest a cardiac dysrhythmia, including those with transcardiac discharge vector. CEW deployments with probe impact configurations capable of producing a transcardiac discharge occur in a minority of cases in field use conditions. None of these cases, transcardiac or otherwise, produced immediately fatal dysrhythmias. These data support the overall safety of CEWs and provide a benchmark estimate of the likelihood of transcardiac discharge vectors occurring in field use of CEWs. Copyright © 2012 Elsevier Inc. All rights reserved.

  3. Electric currents and coronal heating in NOAA active region 6952

    Science.gov (United States)

    Metcalf, T. R.; Canfield, R. C.; Hudson, H. S.; Mickey, D. L.; Wulser, J. -P.; Martens, P. C. H.; Tsuneta, S.

    1994-01-01

    We examine the spatial and temporal relationship between coronal structures observed with the soft X-ray telescope (SXT) on board the Yohkoh spacecraft and the vertical electric current density derived from photospheric vector magnetograms obtained using the Stokes Polarimeter at the Mees Solar Observatory. We focus on a single active region: AR 6952 which we observed on 7 days during 1991 December. For 11 independent maps of the vertical electric current density co-aligned with non-flaring X-ray images, we search for a morphological relationship between sites of high vertical current density in the photosphere and enhanced X-ray emission in the overlying corona. We find no compelling spatial or temporal correlation between the sites of vertical current and the bright X-ray structures in this active region.

  4. Conductive shield for ultra-low-field magnetic resonance imaging: Theory and measurements of eddy currents

    Science.gov (United States)

    Zevenhoven, Koos C. J.; Busch, Sarah; Hatridge, Michael; Öisjöen, Fredrik; Ilmoniemi, Risto J.; Clarke, John

    2014-03-01

    Eddy currents induced by applied magnetic-field pulses have been a common issue in ultra-low-field magnetic resonance imaging. In particular, a relatively large prepolarizing field—applied before each signal acquisition sequence to increase the signal—induces currents in the walls of the surrounding conductive shielded room. The magnetic-field transient generated by the eddy currents may cause severe image distortions and signal loss, especially with the large prepolarizing coils designed for in vivo imaging. We derive a theory of eddy currents in thin conducting structures and enclosures to provide intuitive understanding and efficient computations. We present detailed measurements of the eddy-current patterns and their time evolution in a previous-generation shielded room. The analysis led to the design and construction of a new shielded room with symmetrically placed 1.6-mm-thick aluminum sheets that were weakly coupled electrically. The currents flowing around the entire room were heavily damped, resulting in a decay time constant of about 6 ms for both the measured and computed field transients. The measured eddy-current vector maps were in excellent agreement with predictions based on the theory, suggesting that both the experimental methods and the theory were successful and could be applied to a wide variety of thin conducting structures.

  5. Conductive shield for ultra-low-field magnetic resonance imaging: Theory and measurements of eddy currents.

    Science.gov (United States)

    Zevenhoven, Koos C J; Busch, Sarah; Hatridge, Michael; Oisjöen, Fredrik; Ilmoniemi, Risto J; Clarke, John

    2014-03-14

    Eddy currents induced by applied magnetic-field pulses have been a common issue in ultra-low-field magnetic resonance imaging. In particular, a relatively large prepolarizing field-applied before each signal acquisition sequence to increase the signal-induces currents in the walls of the surrounding conductive shielded room. The magnetic-field transient generated by the eddy currents may cause severe image distortions and signal loss, especially with the large prepolarizing coils designed for in vivo imaging. We derive a theory of eddy currents in thin conducting structures and enclosures to provide intuitive understanding and efficient computations. We present detailed measurements of the eddy-current patterns and their time evolution in a previous-generation shielded room. The analysis led to the design and construction of a new shielded room with symmetrically placed 1.6-mm-thick aluminum sheets that were weakly coupled electrically. The currents flowing around the entire room were heavily damped, resulting in a decay time constant of about 6 ms for both the measured and computed field transients. The measured eddy-current vector maps were in excellent agreement with predictions based on the theory, suggesting that both the experimental methods and the theory were successful and could be applied to a wide variety of thin conducting structures.

  6. Syncing your brain: electric currents to enhance cognition

    NARCIS (Netherlands)

    Schutter, D.J.L.G.

    2014-01-01

    Contemporary studies in cognitive neuroscience demonstrate that cognitive performance can be enhanced by applying exogenous low-intensity electric currents to the brain. These findings have resulted in a widespread interest from both scientists and popular media, particularly, regarding the host of

  7. Syncing your brain: electric currents to enhance cognition

    NARCIS (Netherlands)

    Schutter, D.J.L.G.

    2014-01-01

    Contemporary studies in cognitive neuroscience demonstrate that cognitive performance can be enhanced by applying exogenous low-intensity electric currents to the brain. These findings have resulted in a widespread interest from both scientists and popular media, particularly, regarding the host of

  8. Application of Electromagnetic Induction to Monitor Changes in Soil Electrical Conductivity Profiles in Arid Agriculture

    KAUST Repository

    Jadoon, K.Z.

    2015-09-06

    In this research, multi-configuration electromagnetic induction (EMI) measurements were conducted in a corn field to estimate variation in soil electrical conductivity profiles in the roots zone. Electromagnetic forward model based on the full solution of Maxwell\\'s equation was used to simulate the apparent electrical conductivity measured with EMI system (the CMD mini-Explorer). Joint inversion of multi-configuration EMI measurements were performed to estimate the vertical soil electrical conductivity profiles. The inversion minimizes the misfit between the measured and modeled soil apparent electrical conductivity by DiffeRential Evolution Adaptive Metropolis (DREAM) algorithm, which is based on Bayesain approach. Results indicate that soil electrical conductivity profiles have low values close to the corn plants, which indicates loss of soil moisture due to the root water uptake. These results offer valuable insights into future potential and emerging challenges in the development of joint analysis of multi-configuration EMI measurements to retrieve effective soil electrical conductivity profiles.

  9. Conducted electrical weapons or stun guns: a review of 46 cases examined in casualty.

    Science.gov (United States)

    Becour, Bertrand

    2013-06-01

    Low-lethality weapons are intended to neutralize a person with maximum security and with minimal risk of injury or death to the user of the weapon, the person arrested, and the witnesses. Under the same circumstances, the use of a firearm is causing mortality of 50%. Marketed since 1974, the Taser X26 is currently staffing services in the French police and gendarmerie. The Taser device has 3 damaging mechanisms: the direct effect of electric current on the tissues, the conversion of electrical energy into thermal energy, and the injuries caused by the general muscle contraction and resulting fall. The study aimed to analyze the specificities of the conducted electrical weapon-related injuries treated in a emergency department on a series of 46 cases. The study population was predominantly middle-aged men. The circumstances of use of the Taser X26 were most often related to an arrest. The frequency of consultation after a shot by Taser X26 was stable. The management is essentially an outpatient because of frequent and benign lesions. The impacts of electrical impulse mainly affect the chest and abdomen. This distribution of impact zones is inhomogeneous, depending on the circumstances of use.

  10. Characteristics of ac capillary discharge produced in electrically conductive water solution

    Science.gov (United States)

    DeBaerdemaeker, F.; Simek, M.; Schmidt, J.; Leys, C.

    2007-05-01

    Basic electrical, optical and calorimetric characteristics of an ac (50 Hz) driven capillary discharge produced in a water solution were studied for initial water solution conductivity in the range 50-1000 µS cm-1. Typical current and voltage waveforms and emission intensities produced by several electronically excited species were recorded with high time resolution. The evolution of the electrical current, power and capillary resistance was inspected during positive ac half-cycle for various operational regimes. A fast relaxation of the discharge following a breakdown event was observed. Optical measurements indicate that radiative species are mostly generated during the first few hundreds of nanoseconds of plasma generation and that the average duration of plasma emission induced by a discharge pulse is of the order of a few microseconds. Results of calorimetric measurements are in good agreement with average electrical measurements and support the assumption that the discharge is a constant source of heat delivered to the liquid. Assuming that only a fraction of the heat released inside the capillary can be transported by conduction through the capillary wall and via its orifices, the processes of bubble formation, expulsion and re-filling the capillary with 'fresh' water must play a key role in maintaining a thermal balance during long-time steady-state operation of the device. Furthermore, a simplified numerical model and a first order energy deposition calculation prove the plausibility of the bubble breakdown mechanism.

  11. Gender differences in current received during transcranial electrical stimulation

    Directory of Open Access Journals (Sweden)

    Michael eRussell

    2014-08-01

    Full Text Available Low current transcranial electrical stimulation is an effective but somewhat inconsistent tool for augmenting neuromodulation. In this study, we used 3D MRI guided electrical transcranial stimulation (GETS modeling to estimate the range of current intensities received at cortical brain tissues. Combined T1, T2, Proton Density MRIs from 24 adult subjects (12 male and 12 female were modeled with virtual electrodes placed at F3, F4, C3 and C4. Two sizes of electrodes 20 mm round and 50 x 45 mm square were examined at 0.5, 1 and 2 mA input currents. The intensity of current received was sampled in a one centimeter sphere placed at the cortex directly under each scalp electrode. There was a tenfold range in the current received by individuals. A large gender difference was observed with female subjects receiving significantly less current at targeted parietal cortex than male subjects when stimulated at identical current levels (P <0.05. Larger electrodes delivered somewhat larger amounts of current then the smaller ones (P <0.01. Electrodes in the frontal regions delivered less current than those in the parietal region (P<0.05. There were large individual differences in current levels the subjects received. Analysis of the cranial bone showed that the gender difference and the frontal parietal differences are due to differences in cranial bone. Males have more cancellous parietal bone and females more dense parietal bone (p<0.01. These differences should be considered when planning transcranial electrical stimulation studies and call into question earlier reports of gender differences due to hormonal influences.

  12. Modeling geomagnetic induction hazards using a 3-D electrical conductivity model of Australia

    Science.gov (United States)

    Wang, Liejun; Lewis, Andrew M.; Ogawa, Yasuo; Jones, William V.; Costelloe, Marina T.

    2016-12-01

    The surface electric field induced by external geomagnetic source fields is modeled for a continental-scale 3-D electrical conductivity model of Australia at periods of a few minutes to a few hours. The amplitude and orientation of the induced electric field at periods of 360 s and 1800 s are presented and compared to those derived from a simplified ocean-continent (OC) electrical conductivity model. It is found that the induced electric field in the Australian region is distorted by the heterogeneous continental electrical conductivity structures and surrounding oceans. On the northern coastlines, the induced electric field is decreased relative to the simple OC model due to a reduced conductivity contrast between the seas and the enhanced conductivity structures inland. In central Australia, the induced electric field is less distorted with respect to the OC model as the location is remote from the oceans, but inland crustal high-conductivity anomalies are the major source of distortion of the induced electric field. In the west of the continent, the lower conductivity of the Western Australia Craton increases the conductivity contrast between the deeper oceans and land and significantly enhances the induced electric field. Generally, the induced electric field in southern Australia, south of latitude -20°, is higher compared to northern Australia. This paper provides a regional indicator of geomagnetic induction hazards across Australia.

  13. Effect of Samarium Oxide on the Electrical Conductivity of Plasma-Sprayed SOFC Anodes

    Science.gov (United States)

    Panahi, S. N.; Samadi, H.; Nemati, A.

    2016-10-01

    Solid oxide fuel cells (SOFCs) are rapidly becoming recognized as a new alternative to traditional energy conversion systems because of their high energy efficiency. From an ecological perspective, this environmentally friendly technology, which produces clean energy, is likely to be implemented more frequently in the future. However, the current SOFC technology still cannot meet the demands of commercial applications due to temperature constraints and high cost. To develop a marketable SOFC, suppliers have tended to reduce the operating temperatures by a few hundred degrees. The overall trend for SOFC materials is to reduce their service temperature of electrolyte. Meanwhile, it is important that the other components perform at the same temperature. Currently, the anodes of SOFCs are being studied in depth. Research has indicated that anodes based on a perovskite structure are a more promising candidate in SOFCs than the traditional system because they possess more favorable electrical properties. Among the perovskite-type oxides, SrTiO3 is one of the most promising compositions, with studies demonstrating that SrTiO3 exhibits particularly favorable electrical properties in contrast with other perovskite-type oxides. The main purpose of this article is to describe our study of the effect of rare-earth dopants with a perovskite structure on the electrical behavior of anodes in SOFCs. Sm2O3-doped SrTiO3 synthesized by a solid-state reaction was coated on substrate by atmospheric plasma spray. To compare the effect of the dopant on the electrical conductivity of strontium titanate, different concentrations of Sm2O3 were used. The samples were then investigated by x-ray diffraction, four-point probe at various temperatures (to determine the electrical conductivity), and a scanning electron microscope. The study showed that at room temperature, nondoped samples have a higher electrical resistance than doped samples. As the temperature was increased, the electrical

  14. Experimental Investigation and Modelling for the Optimisation of Conduction Cooled HTS Hybrid Current Leads for SMES

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    It′s important that HTS tapes have lower thermal conductivity and higher transversal resistivity in order to reduce the heat leaks conducted along the tapes and AC losses in the high temperature superconducting system conduction-cooled by GM coolers. This paper presents an experimental investigation into the effects of pure Ag and AgAu alloys sheath materials on the properties of Bi(2223) multifilamentary tapes and the optimisation of conduction-cooled hybrid current leads made from copper and Bi(2223)/Ag or Bi(2223)/AgAu tapes. The thermal conductivity of the tapes were measured by cryogenic steady heat flux method and the resistance was measured by using standard DC four-probe method at low temperature. The results showed that the reduction of thermal conductivity by the addition of Au into the sheath material of Bi(2223) tapes was 650%, 750% and 850% lower than that of pure Ag sheathed Bi(2223) tapes and the increase of resistivity was 4.9, 10 and 19.4 times higher than that of pure Ag for the addition of 2.20%, 5.70% and 10.70%Au(atom ratio) respectively. And the study also attempts to optimise thermodynamically the conduction-cooled hybrid current lead by using a developed model, which took the irreversibility of commercial GM coolers, the contact resistance and thermal conductance into account. Predictions from the model showed that AgAu alloys were suitable candidate materials to replace Ag as sheath material of Bi(2223) tapes applied in HTS current leads. In addition, Bi(2223)/AgAu was a suitable material to be applied as the HTS section of hybrid current leads in conduction-cooled superconducting electric systems.

  15. Effects of conducting media and gender on an electric pulp test.

    Science.gov (United States)

    Chunhacheevachaloke, E; Ajcharanukul, O

    2016-03-01

    (1) To determine the pulpal sensory thresholds in human teeth obtained from using various EPT conducting media and (2) to determine whether there are gender differences. One intact maxillary central incisor was randomly selected from each of 40 participants (20 male, 20 female) aged 19-24 year. A constant-current electrical stimulator (University of Bristol, UK) was used to apply electrical stimuli with different conducting media at intervals of 1 min on the middle of the crown to evaluate the sensory threshold of the tooth. The tip of the electrode was coated with a thin layer of test media. The sensory thresholds and the pain scores were measured simultaneously after applying stimuli twice a second and gradually increasing the intensity until felt by the participants. Test media included water-based gels (K-Y UltraGel; Xylocaine 2% Jelly, electrode gel, fluoride gel) and toothpastes (Colgate Total; Sensodyne Repair & Protect; Dentiste' Plus White; Sparkle White). The sensory threshold data were evaluated using two-way anova followed by the Tukey test. Xylocaine 2% Jelly and fluoride gel evoked significantly lower threshold values when compared with Sensodyne Repair & Protect (P < 0.001). With all test media, the mean sensory threshold from the female group was significantly lower than that of the male group (P < 0.001). The sensory thresholds to electrical stimuli in human teeth was influenced by the type of conducting media and gender. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  16. Modulation of electrical potential and conductivity in an atomic-layer semiconductor heterojunction

    Science.gov (United States)

    Kobayashi, Yu; Yoshida, Shoji; Sakurada, Ryuji; Takashima, Kengo; Yamamoto, Takahiro; Saito, Tetsuki; Konabe, Satoru; Taniguchi, Takashi; Watanabe, Kenji; Maniwa, Yutaka; Takeuchi, Osamu; Shigekawa, Hidemi; Miyata, Yasumitsu

    2016-08-01

    Semiconductor heterojunction interfaces have been an important topic, both in modern solid state physics and in electronics and optoelectronics applications. Recently, the heterojunctions of atomically-thin transition metal dichalcogenides (TMDCs) are expected to realize one-dimensional (1D) electronic systems at their heterointerfaces due to their tunable electronic properties. Herein, we report unique conductivity enhancement and electrical potential modulation of heterojunction interfaces based on TMDC bilayers consisted of MoS2 and WS2. Scanning tunneling microscopy/spectroscopy analyses showed the formation of 1D confining potential (potential barrier) in the valence (conduction) band, as well as bandgap narrowing around the heterointerface. The modulation of electronic properties were also probed as the increase of current in conducting atomic force microscopy. Notably, the observed band bending can be explained by the presence of 1D fixed charges around the heterointerface. The present findings indicate that the atomic layer heterojunctions provide a novel approach to realizing tunable 1D electrical potential for embedded quantum wires and ultrashort barriers of electrical transport.

  17. Modulation of electrical potential and conductivity in an atomic-layer semiconductor heterojunction.

    Science.gov (United States)

    Kobayashi, Yu; Yoshida, Shoji; Sakurada, Ryuji; Takashima, Kengo; Yamamoto, Takahiro; Saito, Tetsuki; Konabe, Satoru; Taniguchi, Takashi; Watanabe, Kenji; Maniwa, Yutaka; Takeuchi, Osamu; Shigekawa, Hidemi; Miyata, Yasumitsu

    2016-08-12

    Semiconductor heterojunction interfaces have been an important topic, both in modern solid state physics and in electronics and optoelectronics applications. Recently, the heterojunctions of atomically-thin transition metal dichalcogenides (TMDCs) are expected to realize one-dimensional (1D) electronic systems at their heterointerfaces due to their tunable electronic properties. Herein, we report unique conductivity enhancement and electrical potential modulation of heterojunction interfaces based on TMDC bilayers consisted of MoS2 and WS2. Scanning tunneling microscopy/spectroscopy analyses showed the formation of 1D confining potential (potential barrier) in the valence (conduction) band, as well as bandgap narrowing around the heterointerface. The modulation of electronic properties were also probed as the increase of current in conducting atomic force microscopy. Notably, the observed band bending can be explained by the presence of 1D fixed charges around the heterointerface. The present findings indicate that the atomic layer heterojunctions provide a novel approach to realizing tunable 1D electrical potential for embedded quantum wires and ultrashort barriers of electrical transport.

  18. Increasing electrical conductivity of upconversion materials by in situ binding with graphene.

    Science.gov (United States)

    Wu, Suli; Sun, Xiaoqian; Zhu, Jiacheng; Chang, Jie; Zhang, Shufen

    2016-08-26

    Upconversion nanoparticles (UCNPs) hold promise as near-infrared light converters to enhance the efficiency of solar cells. However, the prevalent use of UCNPs in solar cells is restricted by their poor electrical conductivity and low emission efficiency. Here reduced graphene oxide (rGO)-NaYF4:Yb(3+)/Er(3+) composites are proposed to achieve good electrical conductivity due to the high charge carrier mobility of rGO. Composites of rGO and UCNPs combined by a chemical bond are in situ synthesized by the hydrothermal method, followed by a reduction process. The contact of UCNPs with rGO is proved by SEM, and the binding between the rGO-UCNP composites is confirmed by Fourier transform infrared spectroscopy. The composites are doped into the photoanode of a solar cell. As anticipated, electrochemical impedance spectroscopy confirms the good electrical conductivity of the in situ synthesized rGO-UCNPs. Furthermore, the use of rGO-UCNPs in solar cells enables an enhancement in short-circuit current density and overall efficiency by about 10%. These findings reveal that the combination of UCNPs with rGO opens up new opportunities of extending the use of UCNPs in the area of solar energy harvesting.

  19. A non-conventional technique for evaluating welded joints based on the electrical conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Santos, T.G.; Sorger, G., E-mail: telmo.santos@fct.unl.pt, E-mail: lgs18243@campus.fct.unl.pt [Universidade Nova de Lisboa, UNIDEMI, Departamento de Engenharia Mecanica e Industrial, Faculdade de Ciencias e Tecnologia, Caparica (Portugal); Vilaca, P., E-mail: pedro.vilaca@aalto.fi [Aalto Univ., Dept. of Engineering Design and Production, School of Engineering, Aalto (Finland); Miranda, R., E-mail: rmiranda@fct.unl.pt [Universidade Nova de Lisboa, UNIDEMI, Departamento de Engenharia Mecanica e Industrial, Faculdade de Ciencias e Tecnologia, Caparica (Portugal)

    2015-01-15

    Recent studies showed that electrical conductivity is a valuable technique to identify the different zones of solid-state welded joints with a good correlation with the microstructure and hardness. This is a relevant result since this technique is fast and, in some cases, non destructive, The concept was applied to other welding processes such as the ones involving fusion to a wide range of materials, For this, a comprehensive study was performed using friction stir welding, tungsten inert gas (TlG) and gas metal arc (MAG) welding processes in either bead on plate or butt joints in: carbon steel, magnesium and titanium, Eddy current nondestructive testing (NDT) was used to measure the electrical conductivity at different depths in transverse sections of the processed materials. The profiles were compared to the hardness profiles in the same sections. As a result, a correlation was observed in most materials welded by solid state and by fusion processes. The variation of the electrical conductivity closely follows that measured in the hardness. Another interesting conclusion is that, even for fusion welding of carbon steels, the technique has potential to complement the hardness measurements and microstructural observations, allowing the identification of the distinct zones of welds in materials commonly used in industry. (author)

  20. Increasing electrical conductivity of upconversion materials by in situ binding with graphene

    Science.gov (United States)

    Wu, Suli; Sun, Xiaoqian; Zhu, Jiacheng; Chang, Jie; Zhang, Shufen

    2016-08-01

    Upconversion nanoparticles (UCNPs) hold promise as near-infrared light converters to enhance the efficiency of solar cells. However, the prevalent use of UCNPs in solar cells is restricted by their poor electrical conductivity and low emission efficiency. Here reduced graphene oxide (rGO)-NaYF4:Yb3+/Er3+ composites are proposed to achieve good electrical conductivity due to the high charge carrier mobility of rGO. Composites of rGO and UCNPs combined by a chemical bond are in situ synthesized by the hydrothermal method, followed by a reduction process. The contact of UCNPs with rGO is proved by SEM, and the binding between the rGO-UCNP composites is confirmed by Fourier transform infrared spectroscopy. The composites are doped into the photoanode of a solar cell. As anticipated, electrochemical impedance spectroscopy confirms the good electrical conductivity of the in situ synthesized rGO-UCNPs. Furthermore, the use of rGO-UCNPs in solar cells enables an enhancement in short-circuit current density and overall efficiency by about 10%. These findings reveal that the combination of UCNPs with rGO opens up new opportunities of extending the use of UCNPs in the area of solar energy harvesting.

  1. Materials and methods for autonomous restoration of electrical conductivity

    Science.gov (United States)

    Blaiszik, Benjamin J; Odom, Susan A; Caruso, Mary M; Jackson, Aaron C; Baginska, Marta B; Ritchey, Joshua A; Finke, Aaron D; White, Scott R; Moore, Jeffrey S; Sottos, Nancy R; Braun, Paul V; Amine, Khalil

    2014-03-25

    An autonomic conductivity restoration system includes a solid conductor and a plurality of particles. The particles include a conductive fluid, a plurality of conductive microparticles, and/or a conductive material forming agent. The solid conductor has a first end, a second end, and a first conductivity between the first and second ends. When a crack forms between the first and second ends of the conductor, the contents of at least a portion of the particles are released into the crack. The cracked conductor and the released contents of the particles form a restored conductor having a second conductivity, which may be at least 90% of the first conductivity.

  2. Superior Electrical Conductivity in Hydrogenated Layered Ternary Chalcogenide Nanosheets for Flexible All-Solid-State Supercapacitors.

    Science.gov (United States)

    Hu, Xin; Shao, Wei; Hang, Xudong; Zhang, Xiaodong; Zhu, Wenguang; Xie, Yi

    2016-05-04

    As the properties of ultrathin two-dimensional (2D) crystals are strongly related to their electronic structures, more and more attempts were carried out to tune their electronic structures to meet the high standards for the construction of next-generation smart electronics. Herein, for the first time, we show that the conductive nature of layered ternary chalcogenide with formula of Cu2 WS4 can be switched from semiconducting to metallic by hydrogen incorporation, accompanied by a high increase in electrical conductivity. In detail, the room-temperature electrical conductivity of hydrogenated-Cu2 WS4 nanosheet film was almost 10(10) times higher than that of pristine bulk sample with a value of about 2.9×10(4)  S m(-1) , which is among the best values for conductive 2D nanosheets. In addition, the metallicity in the hydrogenated-Cu2 WS4 is robust and can be retained under high-temperature treatment. The fabricated all-solid-state flexible supercapacitor based on the hydrogenated-Cu2 WS4 nanosheet film shows promising electrochemical performances with capacitance of 583.3 F cm(-3) at a current density of 0.31 A cm(-3) . This work not only offers a prototype material for the study of electronic structure regulation in 2D crystals, but also paves the way in searching for highly conductive electrodes.

  3. Electrical Properties of Conductive Cotton Yarn Coated with Eosin Y Functionalized Reduced Graphene Oxide.

    Science.gov (United States)

    Kim, Eunju; Arul, Narayanasamy Sabari; Han, Jeong In

    2016-06-01

    This study reports the fabrication and investigation of the electrical properties of two types of conductive cotton yarns coated with eosin Y or eosin B functionalized reduced graphene (RGO) and bare graphene oxide (GO) using dip-coating method. The surface morphology of the conductive cotton yarn coated with reduced graphene oxide was observed by Scanning Electron Microscope (SEM). Due to the strong electrostatic attractive forces, the negatively charged surface such as the eosin Y functionalized reduced graphene oxide or bare GO can be easily coated to the positively charged polyethyleneimine (PEI) treated cotton yarn. The maximum current for the conductive cotton yarn coated with eosin Y functionalized RGO and bare GO with 20 cycles repetition of (5D + R) process was found to be 793.8 μA and 3482.8 μA. Our results showed that the electrical conductivity of bare GO coated conductive cotton yarn increased by approximately four orders of magnitude with the increase in the dipping cycle of (5D+R) process.

  4. Phase Diagrams of Electric-Fduced Aggregation in Conducting Colloids

    Science.gov (United States)

    Khusid, B.; Acrivos, A.

    1999-01-01

    Under the application of a sufficiently strong electric field, a suspension may undergo reversible phase transitions from a homogeneous random arrangement of particles into a variety of ordered aggregation patterns. The surprising fact about electric-field driven phase transitions is that the aggregation patterns, that are observed in very diverse systems of colloids, display a number of common structural features and modes of evolution thereby implying that a universal mechanism may exist to account for these phenomena. It is now generally believed that this mechanism emanates from the presence of the long-range anisotropic interactions between colloidal particles due to their polarization in an applied field. But, in spite of numerous applications of the electric-field-driven phenomena in biotechnology, separation, materials engineering, chemical analysis, etc. our understanding of these phenomena is far from complete. Thus, it is the purpose of the proposed research to develop a theory and then test experimentally, under normal- and low-gravity conditions, the accuracy of the theoretical predictions regarding the effect of the synergism of the interparticle electric and hydrodynamic interactions on the phase diagram of a suspension. The main results from our theoretical studies performed to-date enable one to trace how the variations of the electrical properties of the constituent materials influence the topology of the suspension phase diagram and then, by using an appropriate phase diagram, to evaluate how the electric-field-induced transformations will depend on the frequency and the strength of the applied field.

  5. Electric conductivity for laboratory and field monitoring of induced partial saturation (IPS) in sands

    Science.gov (United States)

    Kazemiroodsari, Hadi

    Liquefaction is loss of shear strength in fully saturated loose sands caused by build-up of excess pore water pressure, during moderate to large earthquakes, leading to catastrophic failures of structures. Currently used liquefaction mitigation measures are often costly and cannot be applied at sites with existing structures. An innovative, practical, and cost effective liquefaction mitigation technique titled "Induced Partial Saturation" (IPS) was developed by researchers at Northeastern University. The IPS technique is based on injection of sodium percarbonate solution into fully saturated liquefaction susceptible sand. Sodium percarbonate dissolves in water and breaks down into sodium and carbonate ions and hydrogen peroxide which generates oxygen gas bubbles. Oxygen gas bubbles become trapped in sand pores and therefore decrease the degree of saturation of the sand, increase the compressibility of the soil, thus reduce its potential for liquefaction. The implementation of IPS required the development and validation of a monitoring and evaluation technique that would help ensure that the sands are indeed partially saturated. This dissertation focuses on this aspect of the IPS research. The monitoring system developed was based on using electric conductivity fundamentals and probes to detect the transport of chemical solution, calculate degree of saturation of sand, and determine the final zone of partial saturation created by IPS. To understand the fundamentals of electric conductivity, laboratory bench-top tests were conducted using electric conductivity probes and small specimens of Ottawa sand. Bench-top tests were used to study rate of generation of gas bubbles due to reaction of sodium percarbonate solution in sand, and to confirm a theory based on which degree of saturation were calculated. In addition to bench-top tests, electric conductivity probes were used in a relatively large sand specimen prepared in a specially manufactured glass tank. IPS was

  6. Ionospheric midlatitude electric current density inferred from multiple magnetic satellites

    Science.gov (United States)

    Shore, R. M.; Whaler, K. A.; Macmillan, S.; Beggan, C.; Olsen, N.; Spain, T.; Aruliah, A.

    2013-09-01

    A method for inferring zonal electric current density in the mid-to-low latitude F region ionosphere is presented. We describe a method of using near-simultaneous overflights of the Ørsted and CHAMP satellites to define a closed circuit for an application of Ampère's integral law to magnetic data. Zonal current density from sources in only the region between the two satellites is estimated for the first time. Six years of mutually available vector magnetic data allows overlaps spanning the full 24 h range of local time twice. Solutions are computed on an event-by-event basis after correcting for estimates of main and crustal magnetic fields. Current density in the range ±0.1 μA/m2 is resolved, with the distribution of electric current largely matching known features such as the Appleton anomaly. The currents appear unmodulated at times of either high-negative Dst or high F10.7, which has implications for any future efforts to model their effects. We resolve persistent current intensifications between geomagnetic latitudes of 30 and 50° in the postmidnight, predawn sector, a region typically thought to be relatively free of electric currents. The cause of these unexpected intensifications remains an open issue. We compare our results with current density predictions made by the Coupled Thermosphere-Ionosphere-Plasmasphere model, a self-consistent, first-principles, three-dimensional numerical dynamic model of ionospheric composition and temperatures. This independent validation of our current density estimates highlights good agreement in the broad spatiotemporal trends we identify, which increases confidence in our results.

  7. Electric field profiling by current transients in silicon diodes

    CERN Document Server

    Menichelli, D; Borchi, E; Toci, G

    2002-01-01

    A novel method, suitable to evaluate the electric field distribution in the space charge region of silicon diodes directly from the measurement of their pulse current response, is proposed. A Transient Current Technique experimental setup, based on a nano-second UV laser, is used for this purpose. It is shown that the problem of solving the basic equations, connecting the current response to the electric field distribution, can be expressed by a linear integral equation. An iterative mathematical procedure is used to obtain the solution, and a spatial resolution of about 10 mu m, comparable to the accuracy obtainable from other commonly used techniques, is deduced from the numerical tests. A preliminary analysis of measured data has also been carried out; the results are encouraging, but they point out that a refinement of the transport model is needed to reach a satisfactorily practical applicability.

  8. Electric field profiling by current transients in silicon diodes

    Energy Technology Data Exchange (ETDEWEB)

    Menichelli, D. E-mail: menichelli@ingfil.ing.unifi.it; Serafini, D.; Borchi, E.; Toci, G

    2002-01-11

    A novel method, suitable to evaluate the electric field distribution in the space charge region of silicon diodes directly from the measurement of their pulse current response, is proposed. A Transient Current Technique experimental setup, based on a nano-second UV laser, is used for this purpose. It is shown that the problem of solving the basic equations, connecting the current response to the electric field distribution, can be expressed by a linear integral equation. An iterative mathematical procedure is used to obtain the solution, and a spatial resolution of about 10 {mu}m, comparable to the accuracy obtainable from other commonly used techniques, is deduced from the numerical tests. A preliminary analysis of measured data has also been carried out; the results are encouraging, but they point out that a refinement of the transport model is needed to reach a satisfactorily practical applicability.

  9. Analysis of conductive target influence in plasma jet experiments through helium metastable and electric field measurements

    Science.gov (United States)

    Darny, T.; Pouvesle, J.-M.; Puech, V.; Douat, C.; Dozias, S.; Robert, Eric

    2017-04-01

    The use of cold atmospheric pressure plasma jets for in vivo treatments implies most of the time plasma interaction with conductive targets. The effect of conductive target contact on the discharge behavior is studied here for a grounded metallic target and compared to the free jet configuration. In this work, realized with a plasma gun, we measured helium metastable HeM (23S1) concentration (by laser absorption spectroscopy) and electric field (EF) longitudinal and radial components (by electro-optic probe). Both diagnostics were temporally and spatially resolved. Mechanisms after ionization front impact on the target surface have been identified. The remnant conductive ionized channel behind the ionization front electrically transiently connects the inner high voltage electrode to the target. Due to impedance mismatching between the ionized channel and the target, a secondary ionization front is initiated and rapidly propagates from the target surface to the inner electrode through this ionized channel. This leads to a greatly enhanced HeM production inside the plasma plume and the capillary. Forward and reverse dynamics occur with further multi reflections of more or less damped ionization fronts between the inner electrode and the target as long as the ionized channel is persisting. This phenomenon is very sensitive to parameters such as target distance and ionized channel conductivity affecting electrical coupling between these two and evidenced using positive or negative voltage polarity and nitrogen admixture. In typical operating conditions for the plasma gun used in this work, it has been found that after the secondary ionization front propagation, when the ionized channel is conductive enough, a glow like discharge occurs with strong conduction current. HeM production and all species excitation, especially reactive ones, are then driven by high voltage pulse evolution. The control of forward and reverse dynamics, impacting on the production of the glow

  10. Electric machine and current source inverter drive system

    Science.gov (United States)

    Hsu, John S

    2014-06-24

    A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

  11. Morphology and Electric Conductance Change Induced by Voltage Pulse Excitation in (GeTe)2/Sb2Te3 Superlattices

    Science.gov (United States)

    Bolotov, Leonid; Saito, Yuta; Tada, Tetsuya; Tominaga, Junji

    2016-09-01

    Chalcogenide superlattice (SL) phase-change memory materials are leading candidates for non-volatile, energy-efficient electric memory where the electric conductance switching is caused by the atom repositioning in the constituent layers. Here, we study the time evolution of the electric conductance in [(GeTe)2/(Sb2Te3)1]4 SLs upon the application of an external pulsed electric field by analysing the structural and electrical responses of the SL films with scanning probe microscopy (SPM) and scanning probe lithography (SPL). At a low pulse voltage (1.6-2.3 V), a conductance switching delay of a few seconds was observed in some SL areas, where the switch to the high conductance state (HCS) is accompanied with an SL expansion under the strong electric field of the SPM probe. At a high pulse voltage (2.5-3.0 V), the HCS current was unstable and decayed in a few seconds; this is ascribed to the degradation of the HCS crystal phase under excessive heating. The reversible conductance change under a pulse voltage of opposite polarity emphasised the role of the electric field in the phase-transition mechanism.

  12. Morphology and Electric Conductance Change Induced by Voltage Pulse Excitation in (GeTe)2/Sb2Te3 Superlattices

    Science.gov (United States)

    Bolotov, Leonid; Saito, Yuta; Tada, Tetsuya; Tominaga, Junji

    2016-01-01

    Chalcogenide superlattice (SL) phase-change memory materials are leading candidates for non-volatile, energy-efficient electric memory where the electric conductance switching is caused by the atom repositioning in the constituent layers. Here, we study the time evolution of the electric conductance in [(GeTe)2/(Sb2Te3)1]4 SLs upon the application of an external pulsed electric field by analysing the structural and electrical responses of the SL films with scanning probe microscopy (SPM) and scanning probe lithography (SPL). At a low pulse voltage (1.6–2.3 V), a conductance switching delay of a few seconds was observed in some SL areas, where the switch to the high conductance state (HCS) is accompanied with an SL expansion under the strong electric field of the SPM probe. At a high pulse voltage (2.5–3.0 V), the HCS current was unstable and decayed in a few seconds; this is ascribed to the degradation of the HCS crystal phase under excessive heating. The reversible conductance change under a pulse voltage of opposite polarity emphasised the role of the electric field in the phase-transition mechanism. PMID:27618797

  13. Over-limiting Current and Control of Dendritic Growth by Surface Conduction in Nanopores

    CERN Document Server

    Han, Ji-Hyung; Bai, Peng; Bazant, Martin Z

    2014-01-01

    Understanding over-limiting current (faster than diffusion) is a long-standing challenge in electrochemistry with applications in desalination and energy storage. Known mechanisms involve either chemical or hydrodynamic instabilities in unconfined electrolytes. Here, it is shown that over-limiting current can be sustained by surface conduction in nano pores, without any such instabilities, and used to control dendritic growth during electrodeposition. Copper electrode posits are grown in anodized aluminum oxide membranes with polyelectrolyte coatings to modify the surface charge. At low currents, uniform electroplating occurs, unaffected by surface modification due to thin electric double layers, but the morphology changes dramatically above the limiting current. With negative surface charge, growth is enhanced along the nanopore surfaces, forming surface dendrites and nanotubes behind a deionization shock. With positive surface charge, dendrites avoid the surfaces and are either guided along the nanopore cen...

  14. Dynamic percolation of electric conductivity and a trend towards fractal skeletal structuring in a random ensemble of magnetized nanodust

    CERN Document Server

    Kukushkin, A B; Neverov, V S; Semenov, I B; Cherepanov, K V; Minashin, P V

    2009-01-01

    Numerical modeling of electrodynamic aggregation is carried out for a random ensemble of magnetized nanodust taken as a many body system of strongly magnetized thin rods (i.e., one-dimensional static magnetic dipoles), which possess electric conductivity and static electric charge, screened with its own static plasma sheath. The self-assembling of quasi-linear filaments from an ensemble of randomly situated basic blocks and the electric short-circuiting between biased electrodes are shown to be supported by the alignment of blocks in an external magnetic field. Statistical analysis of short-circuiting time allows tracing the dynamic percolation of electric conductivity and shows a decrease of percolation threshold for volume fraction, as compared with the observed percolation of carbon nanotubes in liquids and polymer composites. Modeling of short-circuiting stage of evolution is continued with tracing the dynamics of pinching of electric current filaments to show the interplay of all the magnetic and electri...

  15. Interferometrically-controlled electrical currents in carbon nanotubes coated by platinum nanoparticles

    Science.gov (United States)

    Jiménez-Marín, E.; Torres-Torres, C.; Mercado-Zúñiga, C.; Vargas-García, J. R.; Trejo-Valdez, M.; Cervantes-Sodi, F.; Torres-Martínez, R.

    2016-11-01

    Described herein is a spatially selective modification in the conductive effects exhibited by multi-wall carbon nanotubes decorated with platinum nanoparticles. The samples were prepared by a chemical vapor deposition processing route. The changes in the conductivity of the samples in thin film form were achieved and explored by a fringe irradiance pattern impinging on the nanohybrid materials. A vectorial two-wave mixing configuration was performed for varying the electrical behavior of the irradiated film. A noticeable reversible modification in the conductivity of the samples was induced by nanosecond pulses at a 532 nm wavelength in our experiments. The rotation of the angle between the planes of polarization of the incident waves allowed us to switch the electrical currents in a circuit with one input and two outputs. The current-conduction terminals were specifically monitored for cases where the incident beams were displaying parallel or mutually orthogonal polarizations. It was considered that functionalization and metallic decoration processes present opposite responsibilities for the evolution of the electrical phenomena in carbon nanotubes. Impedance spectroscopy measurements were undertaken and a strong dependence on electrical frequency that corresponds to an inductive action in the sample was observed. It was highlighted that the manipulation of the vectorial nature of light can be a useful tool for tuning the electrical response in nanosystems. Potential applications for developing photoconductive and filtering functions can be contemplated.

  16. Ultrahigh Oxidation Resistance and High Electrical Conductivity in Copper-Silver Powder

    Science.gov (United States)

    Li, Jiaxiang; Li, Yunping; Wang, Zhongchang; Bian, Huakang; Hou, Yuhang; Wang, Fenglin; Xu, Guofu; Liu, Bin; Liu, Yong

    2016-12-01

    The electrical conductivity of pure Cu powder is typically deteriorated at elevated temperatures due to the oxidation by forming non-conducting oxides on surface, while enhancing oxidation resistance via alloying is often accompanied by a drastic decline of electrical conductivity. Obtaining Cu powder with both a high electrical conductivity and a high oxidation resistance represents one of the key challenges in developing next-generation electrical transferring powder. Here, we fabricate a Cu-Ag powder with a continuous Ag network along grain boundaries of Cu particles and demonstrate that this new structure can inhibit the preferential oxidation in grain boundaries at elevated temperatures. As a result, the Cu-Ag powder displays considerably high electrical conductivity and high oxidation resistance up to approximately 300 °C, which are markedly higher than that of pure Cu powder. This study paves a new pathway for developing novel Cu powders with much enhanced electrical conductivity and oxidation resistance in service.

  17. Influence of deformation and heat treatment on electrical conductivity of CuMoCr alloy

    Institute of Scientific and Technical Information of China (English)

    XIONG Xue-hui; LIU Lin; YUE Xue-qing; LIU Jian-hua; ZHANG Rui-jun

    2009-01-01

    The solution heat treatment, cold deformation and subsequent aging were performed on CuMoCr al-loy. And the influence of deformation and aging treatment on the electrical conductivity of CuMoCr alloy was studied through metallograph, transmission electron microscopy (TEM) and electrical conductivity measure-ment. Results show that deformation without subsequent aging can reduce the electrical conductivity of CuMoCr alloy, but deformation followed by the optimum aging treatment can effectively improve the electrical conductivi-ty of CuMoCr alloy. Aging at 500℃ for 4 h after 80% deformation, the much better electrical conductivity of CuMoCr alloy can be obtained. Reduction of Cr content in the Cu matrix could be the reason for the enhance-ment of electrical conductivity.

  18. Probing radiation damage by alternated current conductivity as a method to characterize electron hopping conduction in DNA molecules

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, Paulo J.; Coelho, Margarida; Antonio Ribeiro, Paulo; Raposo, Maria [CEFITEC, Departamento de Fisica, Faculdade de Ciencias e Tecnologia, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Dionisio, Madalena [REQUIMTE, Departamento de Quimica, Faculdade de Ciencias e Tecnologia, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal)

    2012-09-17

    Analysis of AC electrical conductivity of deoxyribonucleic acid (DNA) thin films, irradiated with ultraviolet (UV) light, revealed that electrical conduction arises from DNA chain electron hopping between base-pairs and phosphate groups. The hopping distance calculated from correlated barrier hopping model equals the distance between DNA base-pairs, which is consistent with the loss of conductivity with irradiation time arising from a decrease in phosphates groups. In the high frequency regime, at a given frequency, real part of conductivity strongly depends on irradiation time particularly for low dose levels suggesting the use of DNA based films for UV radiation sensors.

  19. Evaluation of DC electric field distribution of PPLP specimen based on the measurement of electrical conductivity in LN{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Jae-Sang; Seong, Jae-Kyu; Shin, Woo-Ju; Lee, Jong-Geon [Hanyang University, 408-2, 4th Engineering Bldg, Sa 3-dong, Sangrok-gu, Ansan 426-791 (Korea, Republic of); Cho, Jeon-Wook; Ryoo, Hee-Suk [Korea Electrotechnology Research Institute, Changwon, Gyungnam 641-120 (Korea, Republic of); Lee, Bang-Wook, E-mail: bangwook@hanyang.ac.kr [Hanyang University, 408-2, 4th Engineering Bldg, Sa 3-dong, Sangrok-gu, Ansan 426-791 (Korea, Republic of)

    2013-11-15

    Highlights: •The electrical conductivity of PPLP in LN{sub 2} was successfully measured. •Based on the measured value of PPLP, DC field analysis was performed. •The electric field distribution was altered according to the DC applying stages. •The maximum electric field was observed during polarity reversal situation. •DC field analysis is important to determine the optimum design of DC HTS devices. -- Abstract: High temperature superconducting (HTS) cable has been paid much attention due to its high efficiency and high current transportation capability, and it is also regarded as eco-friendly power cable for the next generation. Especially for DC HTS cable, it has more sustainable and stable properties compared to AC HTS cable due to the absence of AC loss in DC HTS cable. Recently, DC HTS cable has been investigated competitively all over the world, and one of the key components of DC HTS cable to be developed is a cable joint box considering HVDC environment. In order to achieve the optimum insulation design of the joint box, analysis of DC electric field distribution of the joint box is a fundamental process to develop DC HTS cable. Generally, AC electric field distribution depends on relative permittivity of dielectric materials but in case of DC, electrical conductivity of dielectric material is a dominant factor which determines electric field distribution. In this study, in order to evaluate DC electric field characteristics of the joint box for DC HTS cable, polypropylene laminated paper (PPLP) specimen has been prepared and its DC electric field distribution was analyzed based on the measurement of electrical conductivity of PPLP in liquid nitrogen (LN{sub 2}). Electrical conductivity of PPLP in LN{sub 2} has not been reported yet but it should be measured for DC electric field analysis. The experimental works for measuring electrical conductivity of PPLP in LN{sub 2} were presented in this paper. Based on the experimental works, DC electric

  20. Electrical conductivity improvement of aeronautical carbon fiber reinforced polyepoxy composites by insertion of carbon nanotubes

    OpenAIRE

    Lonjon, Antoine; Demont, Philippe; Dantras, Eric; Lacabanne, Colette

    2012-01-01

    International audience; An increase and homogenization of electrical conductivity is essential in epoxy carbon fiber laminar aeronautical composites. Dynamic conductivity measurements have shown a very poor transversal conductivity. Double wall carbon nanotubes have been introduced into the epoxy matrix to increase the electrical conductivity. The conductivity and the degree of dispersion of carbon nanotubes in epoxy matrix were evaluated. The epoxy matrix was filled with 0.4 wt.% of CNTs to ...

  1. Shear viscosity $\\eta$ to electric conductivity $\\sigma_{el}$ ratio for the Quark-Gluon Plasma

    OpenAIRE

    Puglisi, A.; Plumari, S.; Greco, V.

    2014-01-01

    The transport coefficients of strongly interacting matter are currently subject of intense theoretical and phenomenological studies due to their relevance for the characterization of the quark-gluon plasma produced in ultra relativistic heavy-ion collisions (uRHIC). We discuss the connection between the shear viscosity to entropy density ratio, $\\eta/s$, and the electric conductivity, $\\sigma_{el}$. Once the relaxation time is tuned to have a minimum value of $\\eta/s=1/4\\pi$ near the critical...

  2. Towards flavour-diffusion coefficient and electrical conductivity without ultraviolet contamination

    Energy Technology Data Exchange (ETDEWEB)

    Burnier, Y. [University of Bern, Institute for Theoretical Physics, Albert Einstein Center, Bern (Switzerland); Laine, M. [University of Bielefeld, Faculty of Physics, Bielefeld (Germany)

    2012-02-15

    By subtracting from a recent lattice measurement of the thermal vector-current correlator the known 5-loop vacuum contribution, we demonstrate that the remainder is small and shows no visible short-distance divergence. It can therefore in principle be subjected to model-independent analytic continuation. Testing a particular implementation, we obtain estimates for the flavour-diffusion coefficient (2{pi}TD>or similar 0.8) and electrical conductivity which are significantly smaller than previous results. Although systematic errors remain beyond control at present, some aspects of our approach could be of a wider applicability. (orig.)

  3. Transient Eddy Current Response Due to a Subsurface Crack in a Conductive Plate

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Fangwei [Iowa State Univ., Ames, IA (United States)

    2006-01-01

    Eddy current nondestructive evaluation (NDE) is usually carried out by exciting a time harmonic field using an inductive probe. However, a viable alternative is to use transient eddy current NDE in which a current pulse in a driver coil produces a transient .eld in a conductor that decays at a rate dependent on the conductivity and the permeability of the material and the coil configuration. By using transient eddy current, it is possible to estimate the properties of the conductive medium and to locate and size potential .aws from the measured probe response. The fundamental study described in this dissertation seeks to establish a theoretical understanding of the transient eddy current NDE. Compared with the Fourier transform method, the derived analytical formulations are more convenient when the transient eddy current response within a narrow time range is evaluated. The theoretical analysis provides a valuable tool to study the effect of layer thickness, location of defect, crack opening as well as the optimization of probe design. Analytical expressions have been developed to evaluate the transient response due to eddy currents in a conductive plate based on two asymptotic series. One series converges rapidly for a short time regime and the other for a long time regime and both of them agree with the results calculated by fast Fourier transform over all the times considered. The idea of asymptotic expansion is further applied to determine the induced electromotive force (EMF) in a pick-up coil due to eddy currents in a cylindrical rod. Starting from frequency domain representation, a quasi-static time domain dyadic Green's function for an electric source in a conductive plate has been derived. The resulting expression has three parts; a free space term, multiple image terms and partial reflection terms. The dyadic Green's function serves as the kernel of an electric field integral equation which defines the interaction of an ideal crack with the

  4. Mechanism of electrical conductivity in an irradiated polyimide

    Science.gov (United States)

    Ries, H. R.; Harries, W. L.; Long, S. A. T.; Long, E. R., Jr.

    1989-01-01

    A polyimide was exposed to 1.0 MeV electron radiation. The radiation-induced radical density and dc conductivity were measured at various post-irradiation times. The radiation-induced radical density was found to be correlated to the increased dc conductivity through a hopping model of conductivity. The post-irradiation radical species were identified.

  5. Investigation on the Electrical Conductivity of Transformer Oil-Based AlN Nanofluid

    Directory of Open Access Journals (Sweden)

    M. Dong

    2013-01-01

    Full Text Available Aluminum-nitride-(AlN-transformer oil-based nanofluid was prepared by dispersing AlN nanoparticles in transformer oil. The composition-dependent electrical conductivity of AlN-transformer oil nanofluid was investigated at different ambient temperatures. The results indicate the nonlinear dependences of the electrical conductivity on volumetric fraction and temperature. In comparison to the pure transformer oil, the electrical conductivity of nanofluid containing 0.5% AlN nanoparticles has increased by 1057 times at 60°C. By considering the electrophoresis of the AlN nanoparticles, a straightforward electrical conductivity model is established to modulate and understand the experiment results.

  6. Separation of conductivity and distance measurements for eddy current nondestructive inspection of graphite composite materials

    Science.gov (United States)

    Dufour, Isabelle; Placko, Dominique

    1993-06-01

    This article deals with the study of a process based on the principle of eddy current sensors for the nondestructive evaluation of graphite composite plates. This research has been carried out in the Laboratoire d'Electricitd Signaux et Robotique by the team working on datacollecting sensors for robotics in collaboration with Aerospatiale. Eddy current sensors are characterized by their impedance, which varies when a conducting material is approached in their sensitive area. For a given sensor, the output signal depends directly on the electrical and geometrical properties of the object. In the case discussed here, the interesting data are the distance between the sensor and the object, and its local conductivity. In order to invert the relationships between the sensor signal and the properties of the material, an external parametrical model has been developed. A scanning of the surface with a sensor designed for good spatial resolution measurements gives two accurate maps of the useful data.

  7. Alternative current source based Schottky contact with additional electric field

    Science.gov (United States)

    Mamedov, R. K.; Aslanova, A. R.

    2017-07-01

    Additional electric field (AEF) in the Schottky contacts (SC) that covered the peripheral contact region wide and the complete contact region narrow (as TMBS diode) SC. Under the influence of AEF is a redistribution of free electrons produced at certain temperatures of the semiconductor, and is formed the space charge region (SCR). As a result of the superposition of the electric fields SCR and AEF occurs the resulting electric field (REF). The REF is distributed along a straight line perpendicular to the contact surface, so that its intensity (and potential) has a minimum value on the metal surface and the maximum value at a great distance from the metal surface deep into the SCR. Under the influence of AEF as a sided force the metal becomes negative pole and semiconductor - positive pole, therefore, SC with AEF becomes an alternative current source (ACS). The Ni-nSi SC with different diameters (20-1000 μm) under the influence of the AEF as sided force have become ACS with electromotive force in the order of 0.1-1.0 mV, which are generated the electric current in the range of 10-9-10-7 A, flowing through the external resistance 1000 Ohm.

  8. Temperature and electrical conductivity of the lunar interior from magnetic transient measurements in the geomagnetic tail

    Science.gov (United States)

    Dyal, P.; Parkin, C. W.; Daily, W. D.

    1974-01-01

    Magnetometers were deployed at four Apollo sites on the moon to measure remanent and induced lunar magnetic fields. Measurements from this network of instruments were used to calculate the electrical conductivity, temperature, magnetic permeability, and iron abundance of the lunar interior. Global lunar fields due to eddy currents, induced in the lunar interior by magnetic transients in the geomagnetic tail field, were analyzed to calculate an electrical conductivity profile for the moon: the conductivity increases rapidly with depth from 10 to the minus 9 power mhos/meter at the lunar surface to .0001 mhos/meter at 200 km depth, then less rapidly to .02 mhos/meter at 1000 km depth. A temperature profile is calculated from conductivity: temperature rises rapidly with depth to 1100 K at 200 km depth, then less rapidly to 1800 K at 1000 km depth. Velocities and thicknesses of the earth's magnetopause and bow shock are estimated from simultaneous magnetometer measurements. Average speeds are determined to be about 50 km/sec for the magnetopause and 70 km/sec for the bow shock, although there are large variations in the measurements for any particular boundary crossing.

  9. Evaluation of the electric field in the brain during transcranial direct current stimulation: A sensitivity analysis.

    Science.gov (United States)

    Santos, Laura; Martinho, Miguel; Salvador, Ricardo; Wenger, Cornelia; Fernandes, Sofia R; Ripolles, Oscar; Ruffini, Giulio; Miranda, Pedro C

    2016-08-01

    The use of computational modeling studies accounts currently for the best approach to predict the electric field (E-field) distribution in transcranial direct current stimulation. As with any model, the values attributed to the physical properties, namely the electrical conductivity of the tissues, affect the predicted E-field distribution. A wide range of values for the conductivity of most tissues is reported in the literature. In this work, we used the finite element method to compute the E-field induced in a realistic human head model for two electrode montages targeting the left dorso-lateral prefrontal cortex (DLPFC). A systematic analysis of the effect of different isotropic conductivity profiles on the E-field distribution was performed for the standard bipolar 7×5 cm2 electrodes configuration and also for an optimized multielectrode montage. Average values of the E-field's magnitude, normal and tangential components were calculated in the target region in the left DLPFC. Results show that the field decreases with increasing scalp, cerebrospinal fluid (CSF) and grey matter (GM) conductivities, while the opposite is observed for the skull and white matter conductivities. The tissues whose conductivity most affects the E-field in the cortex are the scalp and the CSF, followed by the GM and the skull. Uncertainties in the conductivity of individual tissues may affect electric field values by up to about 80%.

  10. Combined Aircraft and Satellite-Derived Storm Electric Current and Lightning Rates Measurements and Implications for the Global Electric Circuit

    Science.gov (United States)

    Mach, Douglas M.; Blakeslee, Richard J.; Bateman, Monte G.

    2010-01-01

    Using rotating vane electric field mills and Gerdien capacitors, we measured the electric field profile and conductivity during 850 overflights of electrified shower clouds and thunderstorms spanning regions including the Southeastern United States, the Western Atlantic Ocean, the Gulf of Mexico, Central America and adjacent oceans, Central Brazil, and the South Pacific. The overflights include storms over land and ocean, with and without lightning, and with positive and negative fields above the storms. The measurements were made with the NASA ER-2 and the Altus-II high altitude aircrafts. Peak electric fields, with lightning transients removed, ranged from -1.0 kV/m to 16 kV/m, with a mean value of 0.9 kV/m. The median peak field was 0.29 kV/m. Integrating our electric field and conductivity data, we determined total conduction currents and flash rates for each overpass. With knowledge of the storm location (land or ocean) and type (with or without lightning), we determine the mean currents by location and type. The mean current for ocean storms with lightning is 1.6 A while the mean current for land storms with lightning is 1.0 A. The mean current for oceanic storms without lightning (i.e., electrified shower clouds) is 0.39 A and the mean current for land storms without lightning is 0.13 A. Thus, on average, land storms with or without lightning have about half the mean current as their corresponding oceanic storm counterparts. Over three-quarters (78%) of the land storms had detectable lightning, while less than half (43%) of the oceanic storms had lightning. We did not find any significant regional or latitudinal based patterns in our total conduction currents. By combining the aircraft derived storm currents and flash rates with diurnal lightning statistics derived from the Lightning Imaging Sensor (LIS) and Optical Transient Detector (OTD) low Earth orbiting satellites, we reproduce the diurnal variation in the global electric circuit (i.e., the Carnegie

  11. Study of electrical conductivity response upon formation of ice and gas hydrates from salt solutions by a second generation high pressure electrical conductivity probe.

    Science.gov (United States)

    Sowa, Barbara; Zhang, Xue Hua; Kozielski, Karen A; Dunstan, Dave E; Hartley, Patrick G; Maeda, Nobuo

    2014-11-01

    We recently reported the development of a high pressure electrical conductivity probe (HP-ECP) for experimental studies of formation of gas hydrates from electrolytes. The onset of the formation of methane-propane mixed gas hydrate from salt solutions was marked by a temporary upward spike in the electrical conductivity. To further understand hydrate formation a second generation of window-less HP-ECP (MkII), which has a much smaller heat capacity than the earlier version and allows access to faster cooling rates, has been constructed. Using the HP-ECP (MkII) the electrical conductivity signal responses of NaCl solutions upon the formation of ice, tetrahydrofuran hydrates, and methane-propane mixed gas hydrate has been measured. The concentration range of the NaCl solutions was from 1 mM to 3M and the driving AC frequency range was from 25 Hz to 5 kHz. This data has been used to construct an "electrical conductivity response phase diagrams" that summarize the electrical conductivity response signal upon solid formation in these systems. The general trend is that gas hydrate formation is marked by an upward spike in the conductivity at high concentrations and by a drop at low concentrations. This work shows that HP-ECP can be applied in automated measurements of hydrate formation probability distributions of optically opaque samples using the conductivity response signals as a trigger.

  12. Electrical Conductivity of Quark-Gluon Plasma in Strong Magnetic Fields

    CERN Document Server

    Hattori, Koichi

    2016-01-01

    We compute the electrical conductivity of quark-gluon plasma in a strong magnetic field $B$ with quantum field theory at finite temperature using the lowest Landau level approximation. We provide the one-loop result arising from 1-to-2 scattering processes whose kinematics are satisfied by the (1+1) dimensional fermion dispersion relation. Due to the chirality conservation, the conductivity diverges in the massless limit, and is sensitive to the value of the current quark mass. As a result, we find that the conductivity along the direction of the magnetic field is quite large compared with the value at $B=0$, mainly because of the small value of the current quark mass. We show that the resummation of the ladder diagrams for the current-current correlator gives rise to only sub-leading contributions beyond the leading-log order, and thus verify our one-loop result at the leading-log accuracy. We also discuss possible implications for the relativistic heavy-ion collisions.

  13. Electrical signaling, stomatal conductance, ABA and ethylene content in avocado trees in response to root hypoxia.

    Science.gov (United States)

    Gil, Pilar M; Gurovich, Luis; Schaffer, Bruce; García, Nicolás; Iturriaga, Rodrigo

    2009-02-01

    Avocado (Persea americana Mill.) trees are among the most sensitive of fruit tree species to root hypoxia as a result of flooded or poorly drained soil. Similar to drought stress, an early physiological response to root hypoxia in avocado is a reduction of stomatal conductance. It has been previously determined in avocado trees that an extracellular electrical signal between the base of stem and leaves is produced and related to reductions in stomatal conductance in response to drought stress. The current study was designed to determine if changes in the extracellular electrical potential between the base of the stem and leaves in avocado trees could also be detected in response to short-term (min) or long-term (days) root hypoxia, and if these signals could be related to stomatal conductance (gs), root and leaf ABA and ACC concentrations, ethylene emission from leaves and leaf abscission. In contrast to previous observations for drought-stressed trees, short-term or long-term root hypoxia did not stimulate an electrical potential difference between the base of the stem and leaves. Short-term hypoxia did not result in a significant decrease in gs compared with plants in the control treatment, and no differences in ABA concentration were found between plants subjected to hypoxia and control plants. Long-term hypoxia in the root zone resulted in a significant decrease in gs, increased leaf ethylene and increased leaf abscission. The results indicate that for avocado trees exposed to root hypoxia, electrical signals do not appear to be the primary root-to-shoot communication mechanism involved in signaling for stomatal closure as a result of hypoxia in the root zone.

  14. Electrical signaling, stomatal conductance, ABA and Ethylene content in avocado trees in response to root hypoxia

    Science.gov (United States)

    Gurovich, Luis; Schaffer, Bruce; García, Nicolás; Iturriaga, Rodrigo

    2009-01-01

    Avocado (Persea americana Mill.) trees are among the most sensitive of fruit tree species to root hypoxia as a result of flooded or poorly drained soil. Similar to drought stress, an early physiological response to root hypoxia in avocado is a reduction of stomatal conductance. It has been previously determined in avocado trees that an extracellular electrical signal between the base of stem and leaves is produced and related to reductions in stomatal conductance in response to drought stress. The current study was designed to determine if changes in the extracellular electrical potential between the base of the stem and leaves in avocado trees could also be detected in response to short-term (min) or long-term (days) root hypoxia, and if these signals could be related to stomatal conductance (gs), root and leaf ABA and ACC concentrations, ethylene emission from leaves and leaf abscission. In contrast to previous observations for drought-stressed trees, short-term or long-term root hypoxia did not stimulate an electrical potential difference between the base of the stem and leaves. Short-term hypoxia did not result in a significant decrease in gs compared with plants in the control treatment, and no differences in ABA concentration were found between plants subjected to hypoxia and control plants. Long-term hypoxia in the root zone resulted in a significant decrease in gs, increased leaf ethylene and increased leaf abscission. The results indicate that for avocado trees exposed to root hypoxia, electrical signals do not appear to be the primary root-to-shoot communication mechanism involved in signaling for stomatal closure as a result of hypoxia in the root zone. PMID:19649181

  15. Scanning electron microscope technique for measuring electrical conductivity: application to tetrathiafulvalene--tetracyanoquinodimethane

    Energy Technology Data Exchange (ETDEWEB)

    Long, James Peter [Univ. of Illinois, Urbana-Champaign, IL (United States)

    1977-01-01

    A new technique for measuring the electrical conductivity of small samples and its application to the organic conductor tetrathiafulvalene-tetracyanoquinodimethane (TTF-TCNQ) is reported. A movable current source provided by the electron beam of a scanning electron microscope is used to map out the potential distribution on crystal faces containing the a-b crystallographic axes. Silver paint contacts are used to return the beam current to ground and measure voltage changes as the beam position is moved. The results of the new technique are confirmed and complemented by the conventional movable contact method and the extension of both methods to low temperature is discussed. The potential distributions for our samples reveal frequently occurring irregularities in current flow which are attributable to sample imperfections and inhomogeneities in the silver paint contacts. Methods are presented whereby the commonly reported conductivities sigmaa and sigmab can be determined despite the presence of certain current flow irrgularities; room temperature values are found to be: sigmab = 490 ± 80 (Ωcm)-1 and sigmaa = 1.21 ± 0.15 (Ωcm)-1. The relationship of sigmaa/ and sigmab to the elements of the correctly expressed conductivity tensor for TTF-TCNQ is clarified. The influence of contact inhomogeneities on four-probe measurements of the temperature dependence of the b-axis conductivity as determined with an electrolytic tank model are also presented. It is found that there is a large probability of slightly underestimating conductivity, but that it is possible in a small number of cases to greatly overestimate conductivity.

  16. Induced current magnetic resonance electrical impedance tomography with z-gradient coil.

    Science.gov (United States)

    Eroğlu, Hasan H; Eyüboğlu, B Murat

    2014-01-01

    Magnetic Resonance Electrical Impedance Tomography (MREIT) is a medical imaging method that provides images of electrical conductivity at low frequencies (0-1 kHz). In MREIT, electrical current is applied to the body via surface electrodes and corresponding magnetic flux density is measured by means of Magnetic Resonance (MR) phase imaging techniques. By utilizing the magnetic flux density measurements and surface potential measurements images of true conductivity distribution can be reconstructed. In order to overcome difficulties regarding current application via surface electrodes, Induced Current MREIT (ICMREIT) have been proposed in the past. In ICMREIT, electrical currents and corresponding magnetic flux density are generated in the object through electromagnetic induction by means of externally placed coils driven with time varying currents. In this study, use of z-gradient, z-Helmholtz, and circular coil configurations in ICMREIT are proposed and investigated. Finite Element Method (FEM) is used to solve the forward problem of ICMREIT. Consequently, excitation performances and clinical applicability of different coil configurations are analyzed.

  17. Electrical conductivity imaging of lower extremities using MREIT: postmortem swine and in vivo human experiments.

    Science.gov (United States)

    Woo, Eung Je; Kim, Hyung Joong; Minhas, Atul S; Kim, Young Tae; Jeong, Woo Chul; Kwon, O

    2008-01-01

    Cross-sectional conductivity images of lower extremities were reconstructed using Magnetic Resonance Electrical Impedance Tomography (MREIT) techniques. Carbon-hydrogel electrodes were adopted for postmortem swine and in vivo human imaging experiments. Due to their large surface areas and good contacts on the skin, we could inject as much as 10 mA into the lower extremities of human subjects without producing a painful sensation. Using a 3T MREIT system, we first performed a series of postmortem swine experiments and produced high-resolution conductivity images of swine legs. Validating the experimental protocol for the lower extremities, we revised it for the following human experiments. After the review of the Institutional Review Board (IRB), we conducted our first MREIT experiments of human subjects using the same 3T MREIT system. Collecting magnetic flux density data inside lower extremities subject to multiple injection currents, we reconstructed cross-sectional conductivity images using the harmonic B(z) algorithm. The conductivity images very well distinguished different parts of muscles inside the lower extremities. The outermost fatty layer was clearly shown in each conductivity image. We could observe severe noise in the outer layer of the bones primarily due to the MR signal void phenomenon there. Reconstructed conductivity images indicated that the internal regions of the bones have relatively high conductivity values. Future study is desired in terms of the conductivity image reconstruction algorithm to improve the image quality. Further human imaging experiments are planned and being conducted to produce high-resolution conductivity images from different parts of the human body.

  18. Electrically Conductive, Hydrophilic Porous Membrane for Fuel Cell Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I effort seeks to produce a conductive polyethersulfone (PES) microporous membrane for fuel cell water management applications. This membrane will...

  19. Aggregation of Electric Current Consumption Features to Extract Maintenance KPIs

    Science.gov (United States)

    Simon, Victor; Johansson, Carl-Anders; Galar, Diego

    2017-09-01

    All electric powered machines offer the possibility of extracting information and calculating Key Performance Indicators (KPIs) from the electric current signal. Depending on the time window, sampling frequency and type of analysis, different indicators from the micro to macro level can be calculated for such aspects as maintenance, production, energy consumption etc. On the micro-level, the indicators are generally used for condition monitoring and diagnostics and are normally based on a short time window and a high sampling frequency. The macro indicators are normally based on a longer time window with a slower sampling frequency and are used as indicators for overall performance, cost or consumption. The indicators can be calculated directly from the current signal but can also be based on a combination of information from the current signal and operational data like rpm, position etc. One or several of those indicators can be used for prediction and prognostics of a machine's future behavior. This paper uses this technique to calculate indicators for maintenance and energy optimization in electric powered machines and fleets of machines, especially machine tools.

  20. High Current Density and Low Thermal Conductivity of Atomically Thin Semimetallic WTe2.

    Science.gov (United States)

    Mleczko, Michal J; Xu, Runjie Lily; Okabe, Kye; Kuo, Hsueh-Hui; Fisher, Ian R; Wong, H-S Philip; Nishi, Yoshio; Pop, Eric

    2016-08-23

    Two-dimensional (2D) semimetals beyond graphene have been relatively unexplored in the atomically thin limit. Here, we introduce a facile growth mechanism for semimetallic WTe2 crystals and then fabricate few-layer test structures while carefully avoiding degradation from exposure to air. Low-field electrical measurements of 80 nm to 2 μm long devices allow us to separate intrinsic and contact resistance, revealing metallic response in the thinnest encapsulated and stable WTe2 devices studied to date (3-20 layers thick). High-field electrical measurements and electrothermal modeling demonstrate that ultrathin WTe2 can carry remarkably high current density (approaching 50 MA/cm(2), higher than most common interconnect metals) despite a very low thermal conductivity (of the order ∼3 Wm(-1) K(-1)). These results suggest several pathways for air-stable technological viability of this layered semimetal.

  1. Electrical Conductivity of Chlorophyll with Polythiophene Thin Film on Indium Tin Oxide as P-N Heterojunction Solar Cell

    Science.gov (United States)

    Aziz, M. F. A.; Hasiah, S.; Rasul, F. L. M.; Senin, H. B.

    2009-06-01

    The aim of this research was to study the electrical conductivity for electrical conductivity of chlorophyll with polythiophene (PT) thin film on indium tin oxide as P-N heterojunction solar cell. The polythiophene thin film is deposited to the Indium Tin Oxide (ITO) substrate using electrochemistry method. The chlorophyll (CHLO) thin film then been coated on polythiophene thin film using spin coated method. Current and voltage of ITO/PT/CHLO thin film is measured in the dark and under different light intensity using four points probe. The result shows that combination of the thinnest polythiophene thin film with the thickest chlorophyll thin film produce the highest conductivity reach up to ±0.1 Sm-1 (raise 22% under illumination compared to the electrical conductivity in the dark condition).

  2. Steady electric fields and currents elementary electromagnetic theory

    CERN Document Server

    Chirgwin, B H; Kilmister, C W

    2013-01-01

    Steady Electric Fields and Currents, Volume 1 is an introductory text to electromagnetism and potential theory. This book starts with the fields associated with stationary charges and unravels the stationary condition to allow consideration of the flow of steady currents in closed circuits. The opening chapter discusses the experimental results that require mathematical explanation and discussion, particularly those referring to phenomena that question the validity of the simple Newtonian concepts of space and time. The subsequent chapters consider steady-state fields, electrostatics, dielectr

  3. Designed patterns: flexible control of precipitation through electric currents.

    Science.gov (United States)

    Bena, I; Droz, M; Lagzi, I; Martens, K; Rácz, Z; Volford, A

    2008-08-15

    Understanding and controlling precipitation patterns formed in reaction-diffusion processes is of fundamental importance with high potential for technical applications. Here we present a theory showing that precipitation resulting from reactions among charged agents can be controlled by an appropriately designed, time-dependent electric current. Examples of current dynamics yielding periodic bands of prescribed wavelength, as well as more complicated structures are given. The pattern control is demonstrated experimentally using the reaction-diffusion process 2AgNO3 + K2Cr2O7-->under Ag2Cr2O7 + 2KNO3.

  4. Electrical conductivity measurement: a new technique to detect iatrogenic initial pedicle perforation.

    Science.gov (United States)

    Bolger, Ciaran; Kelleher, Michael O; McEvoy, Linda; Brayda-Bruno, M; Kaelin, A; Lazennec, J-Y; Le Huec, J-C; Logroscino, C; Mata, P; Moreta, P; Saillant, G; Zeller, R

    2007-11-01

    Pedicle screw fixation has achieved significant popularity amongst spinal surgeons for both single and multi-level spinal fusion. Misplacement and pedicle cortical violation occurs in over 20% of screw placement and can result in potential complications such as dysthesia, paraparesis or paraplegia. There have been many advances in techniques available for navigating through the pedicle; however, these techniques are not without drawbacks. A new electrical conductivity-measuring device, previously evaluated on the porcine model to detect the pedicle violation, was evaluated amongst nine European Hospitals to be used in conjunction with the methods currently used in that centre. This new device is based on two original principles; the device is integrated in the drilling or screwing tool. The technology allows real-time detection of perforation through two independent parameters, impedance variation and evoked muscle contractions. Data was collected twofold. Initially, the surgeon was given the device and a comparison was made between the devices ability to detect a breech and the surgeon's ability to detect one using his traditional methods of pedicle preparation. In the second module of the study, the surgeon was limited to using the electrical conductivity detection device as their sole guide to detect pedicle breaches. A comparison was made between the detection ability of the device and the other detection possibilities. Post-operative fine cut CT scanning was used to detect the pedicle breaches. Overall, the 11 trial surgeons performed a total of 521 pedicle drillings on 97 patients. Initially there were 147 drillings with 23 breaches detected. The detection rate of these breaches were 22/23 for the device compared to 10/23 by the surgeon. Over both parts of the study 64 breaches (12.3%) were confirmed on post-operative CT imaging. The electrical conductivity detection device detected 63 of the 64 breaches (98.4%). There was one false negative and four false

  5. Ultra-fast and energy-efficient sintering of ceramics by electric current concentration.

    Science.gov (United States)

    Zapata-Solvas, E; Gómez-García, D; Domínguez-Rodríguez, A; Todd, R I

    2015-02-17

    Electric current activated/assisted sintering (ECAS) techniques, such as electrical discharge sintering (EDS) or resistive sintering (RS), have been intensively investigated for longer than 50 years. In this work, a novel system including an electrically insulated graphite die for Spark Plasma Sintering (SPS) is described, which allows the sintering of any refractory ceramic material in less than 1 minute starting from room temperature with heating rates higher than 2000°C/min and an energy consumption up to 100 times lower than with SPS. The system alternates or combines direct resistive sintering (DRS) and indirect resistive sintering (IRS). Electrical insulation of the die has been achieved through the insertion of a film made of alumina fibers between the graphite die and the graphite punches, which are protected from the alumina fiber film by a graphite foil. This system localized the electric current directly through the sample (conductive materials) as in DRS and EDS, or through the thin graphite foil (non-conductive materials) as in IRS, and is the first system capable of being used under EDS or RS conditions independently combining current concentration/localization phenomena.

  6. Ionospheric midlatitude electric current density inferred from multiple magnetic satellites

    DEFF Research Database (Denmark)

    Shore, R. M.; Whaler, K. A.; Macmillan, S.

    2013-01-01

    A method for inferring zonal electric current density in the mid-to-low latitude F region ionosphere is presented. We describe a method of using near-simultaneous overflights of the Ørsted and CHAMP satellites to define a closed circuit for an application of Ampère's integral law to magnetic data....... Zonal current density from sources in only the region between the two satellites is estimated for the first time. Six years of mutually available vector magnetic data allows overlaps spanning the full 24 h range of local time twice. Solutions are computed on an event-by-event basis after correcting...... for estimates of main and crustal magnetic fields. Current density in the range ±0.1 μA/m2 is resolved, with the distribution of electric current largely matching known features such as the Appleton anomaly. The currents appear unmodulated at times of either high-negative Dst or high F10.7, which has...

  7. Preparation of Electrically Conductive Polystyrene/Carbon Nanofiber Nanocomposite Films

    Science.gov (United States)

    Sun, Luyi; O'Reilly, Jonathan Y.; Tien, Chi-Wei; Sue, Hung-Jue

    2008-01-01

    A simple and effective approach to prepare conductive polystyrene/carbon nanofiber (PS/CNF) nanocomposite films via a solution dispersion method is presented. Inexpensive CNF, which has a structure similar to multi-walled carbon nanotubes, is chosen as a nanofiller in this experiment to achieve conductivity in PS films. A good dispersion is…

  8. Sublinear dispersive conductivity in polyetherimides by the electric modulus formalism

    OpenAIRE

    Mudarra López, Miguel; Sellarès González, Jordi; Cañadas Lorenzo, Juan Carlos; Diego Vives, José Antonio

    2013-01-01

    (c) 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works. Two commercially available polyetherimides, Ultem 1000 and Ultem 5000, have been studied by means of Dynamic Electrical Analysis. Result...

  9. Self-resonant Coil for Contactless Electrical Conductivity Measurement under Pulsed Ultra-high Magnetic Fields

    CERN Document Server

    Nakamura, Daisuke; Takeyama, Shojiro

    2014-01-01

    In this study, we develop experimental apparatus for contactless electrical conductivity measurements under pulsed high magnetic fields over 100 T using a self-resonant-type high-frequency circuit. The resonant power spectra were numerically analyzed, and the conducted simulations showed that the apparatus is optimal for electrical conductivity measurements of materials with high electrical conductivity. The newly developed instruments were applied to a high-temperature cuprate superconductor La$_{2-x}$Sr$_x$CuO$_4$ to show conductivity changes in magnetic fields up to 102 T with a good signal-to-noise ratio. The upper critical field was determined with high accuracy.

  10. Thermal switching of the electrical conductivity of Si(111)([Formula

    DEFF Research Database (Denmark)

    Wells, J W; Kallehauge, Jesper; Hofmann, Ph

    2007-01-01

    The temperature-dependent surface conductivity of the Si(111)([Formula: see text])Ag surface was measured using a microscopic four-point probe. The conductivity was found to undergo a sharp increase of about three orders of magnitude when the system was heated above about 220 K. This strong...... conductivity change is reversible and attributed to the phase transition which is generally believed to occur on this surface. It is also shown that, in order to find the true surface conductivity, it is necessary to separate it from the contribution of the bulk and space charge layer. In this work......, this is achieved by using a finite-element model. A percolating network of Ag islands on Si(111) was also studied and a much simpler behaviour (compared to that of Si(111)([Formula: see text])Ag) was found. The temperature-dependent conductivity of this system was found to display typical metallic behaviour...

  11. Electrical conductivity measurements of aqueous and immobilized potassium hydroxide

    DEFF Research Database (Denmark)

    Allebrod, Frank; Chatzichristodoulou, Christodoulos; Mollerup, Pia Lolk

    2012-01-01

    -porous solid pellets were produced and used to immobilize aqueous KOH solutions. These are intended to operate as ion-conductive diaphragms (electrolytes) in alkaline electrolysis cells, offering high conductivity and corrosion resistance. The conductivity of immobilized KOH has been determined by the same......It is important to know the conductivity of the electrolyte of an alkaline electrolysis cell at a given temperature and concentration so as to reduce the ohmic loss during electrolysis through optimal cell and system design. The conductivity of aqueous KOH at elevated temperatures and high...... + gaseous phase fields of the KOH/H2O system were calculated as a function of temperature, concentration and pressure in the temperature range of 100–350 °C, for concentrations of 0–60 wt% and at pressures between 1 and 100 bar....

  12. Influence of dehydration on the electrical conductivity of epidote and implications for high-conductivity anomalies in subduction zones

    Science.gov (United States)

    Hu, Haiying; Dai, Lidong; Li, Heping; Hui, Keshi; Sun, Wenqing

    2017-04-01

    The anomalously high electrical conductivities ( 0.1 to 1 S/m) in deep mantle wedge regions extensively detected by magnetotelluric studies are often associated with the presence of fluids released from the progressive dehydration of subducting slabs. Epidote minerals are the Ca-Al-rich hydrous silicates with huge stability fields exceeding those of amphibole (>70-80 km) in subducting oceanic crust, and they may therefore be transported to greater depth than amphibole and release water to the mantle wedge. In this study, the electrical conductivities of epidote were measured at 0.5-1.5 GPa and 573-1273 K by using a Solartron-1260 Impedance/Gain-Phase Analyzer in a YJ-3000t multianvil pressure within the frequency range of 0.1-106 Hz. The results demonstrate that the influence of pressure on electrical conductivity of epidote is relatively small compared to that of temperature. The dehydration reaction of epidote is observed through the variation of electrical conductivity around 1073 K, and electrical conductivity reaches up to 1 S/m at 1273 K, which can be attributed to aqueous fluid released from epidote dehydration. After sample dehydration, electrical conductivity noticeably decreases by as much as nearly a log unit compared with that before dehydration, presumably due to a combination of the presence of coexisting mineral phases and aqueous fluid derived from the residual epidote. Taking into account the petrological and geothermal structures of subduction zones, it is suggested that the aqueous fluid produced by epidote dehydration could be responsible for the anomalously high conductivities in deep mantle wedges at depths of 70-120 km, particularly in hot subduction zones.

  13. An electric current associated with gravity sensing in maize roots

    Science.gov (United States)

    Bjorkman, T.; Leopold, A. C.

    1987-01-01

    The study of gravisensing would be greatly enhanced if physiological events associated with gravity sensing could be detected separately from subsequent growth processes. This report presents a means to discriminate sensing from the growth processes. By using a vibrating probe, we have found an electric current generated by the gravity sensing region of the root cap of maize (Zea mays cv Merit) in response to gravistimulation. On the upper surface of the root cap, the change from the endogenous current has a density of 0.55 microampere per square centimeter away from gravity. The onset of the current shift has a characteristic of lag of three to four minutes after gravistimulation, which corresponds to the presentation time for gravity sensing in this tissue. A description of the current provides some information about the sensing mechanism, as well as being a valuable means to detect gravity sensing independently of differential growth.

  14. Effects of high-frequency alternating current on axonal conduction through the vagus nerve

    Science.gov (United States)

    Waataja, Jonathan J.; Tweden, Katherine S.; Honda, Christopher N.

    2011-10-01

    High-frequency alternating current (HFAC) is known to disrupt axonal conduction in peripheral nerves, and HFAC has much potential as a therapeutic approach for a number of pathological conditions. Many previous studies have utilized motor output as a bioassay of effects of HFAC on conduction through medium- to large-diameter motor axons. However, little is known about the effectiveness of HFAC on smaller, more slowly conducting nerve fibres. The present study tested whether HFAC influences axonal conduction through sub-diaphragmatic levels of the rat vagus nerve, which consists almost entirely of small calibre axons. Using an isolated nerve preparation, we tested the effects of HFAC on electrically evoked compound action potentials (CAPs). We found that delivery of charge-balanced HFAC at 5000 Hz for 1 min was effective in producing reversible blockade of axonal conduction. Both Aδ and C components of the vagus CAP were attenuated, and the degree of blockade as well as time to recovery was proportional to the amount of HFAC current delivered. The Aδ waves were more sensitive than C waves to HFAC blockade, but they required more time to recover.

  15. Hard X-ray emitting energetic electrons and photospheric electric currents

    CERN Document Server

    Musset, Sophie; Bommier, Véronique

    2015-01-01

    The energy released during solar flares is believed to be stored in non-potential magnetic fields associated with electric currents flowing in the corona. While no measurements of coronal electric currents are presently available, maps of photospheric electric currents can now be derived from SDO/HMI observations. Photospheric electric currents have been shown to be the tracers of the coronal electric currents. Particle acceleration can result from electric fields associated with coronal electric currents. We revisit here some aspects of the relationship between particle acceleration in solar flares and electric currents in the active region. We study the relation between the energetic electron interaction sites in the solar atmosphere, and the magnitudes and changes of vertical electric current densities measured at the photospheric level, during the X2.2 flare on February 15 2011 in AR NOAA 11158. X-ray images from RHESSI are overlaid on magnetic field and electric current density maps calculated from the s...

  16. Numerical Modelling of Electric Conductance of a thin Sheet

    Directory of Open Access Journals (Sweden)

    Mojmir Kollar

    2006-01-01

    Full Text Available In this paper the numeric modelling of total resistance of a thin sheet, with local conductivity in randomlydistributed grains higher then is that of the basic matrix, is presented. The 2D model is formed by a structure of longitudinaland transversal conductors interconnected in nodes of a square net. In all nodes, using iteration procedure, the potential isdetermined from which the conductance of sheet is computed between two touching electrodes. The described model can beused to imitate the behaviour of heterogeneous thin conducting sheets prepared by different techniques. The model wasverified in some cases where the net resistance is well known from the theory.

  17. Electrical conductivity of molten SnCl{sub 2} at temperature as high as 1314 K

    Energy Technology Data Exchange (ETDEWEB)

    Salyulev, Alexander B.; Potapov, Alexei M. [Ural Branch of RAS, Ekaterinburg (Russian Federation). Inst. of High-Temperature Electrochemistry

    2015-07-01

    The electrical conductivity of molten SnCl{sub 2} was measured in a wide temperature range (ΔT=763 K), from 551 K to temperature as high as 1314 K, that is, 391 above the boiling point of the salt. The specific electrical conductance was found to reach its maximum at 1143 K, after that it decreases with the temperature rising.

  18. Electrical Conductivity Of Diamond Up To 1,200 Degrees C

    Science.gov (United States)

    Vandersande, Jan W.; Zoltan, Leslie D.

    1993-01-01

    Report discusses measurements of electrical conductivities of two synthetic diamond films, three synthetic diamondlike films, and two natural type IIa diamonds at temperatures from ambient to 1,200 degrees C. Measurements performed to compare electrical conductivities of state-of-the-art diamond films with those of natural insulating diamond, particularly at temperatures above 700 degrees C.

  19. Effect of decreasing electrical resistance in Characeae cell membranes caused by the flow of alternating current

    Directory of Open Access Journals (Sweden)

    Edward Śpiewla

    2014-02-01

    Full Text Available By means of the techniques of external electrodes and microelectrodes, it was found that evanescent flow of an alternating current through plasmalemma of Characeae cells neutralises oscillatory change in their electrical resistance and reversibly diminishes its value. This effect is particularly significant in the case of "high resistance cells", but it weakens with increasing temperature. The value of the estimated activation energy indicates that, after flow of the alternating current through the membrane, a rapid increase in the conductivity may be caused by an increase in conductivity of potassium channels. This result seems to support the hypothesis of electroconformational feedback.

  20. The electrical conductivity of jet fuels F–34 and F–35 (JET A–1 in distribution

    Directory of Open Access Journals (Sweden)

    Białecki Tomasz

    2015-12-01

    Full Text Available The paper presents a changeability of electrical conductivity of jet fuels in distribution. Author described the methods used to prevent the formation of the dangers of static electricity. Research was carried out on two basic fuels used worldwide to power engines in civil (Jet A – 1 and military aircrafts (F – 34, during real fuel supplies in aviation military unit. Results of influence of temperature on the electrical conductivity of jet fuel are presented.

  1. Oxygen ion implantation induced microstructural changes and electrical conductivity in Bakelite RPC detector material

    Science.gov (United States)

    Kumar, K. V. Aneesh; Ranganathaiah, C.; Kumarswamy, G. N.; Ravikumar, H. B.

    2016-05-01

    In order to explore the structural modification induced electrical conductivity, samples of Bakelite Resistive Plate Chamber (RPC) detector materials were exposed to 100 keV Oxygen ion in the fluences of 1012, 1013, 1014 and 1015 ions/cm2. Ion implantation induced microstructural changes have been studied using Positron Annihilation Lifetime Spectroscopy (PALS) and X-Ray Diffraction (XRD) techniques. Positron lifetime parameters viz., o-Ps lifetime and its intensity shows the deposition of high energy interior track and chain scission leads to the formation of radicals, secondary ions and electrons at lower ion implantation fluences (1012 to1014 ions/cm2) followed by cross-linking at 1015 ions/cm2 fluence due to the radical reactions. The reduction in electrical conductivity of Bakelite detector material is correlated to the conducting pathways and cross-links in the polymer matrix. The appropriate implantation energy and fluence of Oxygen ion on polymer based Bakelite RPC detector material may reduce the leakage current, improves the efficiency, time resolution and thereby rectify the aging crisis of the RPC detectors.

  2. Oxygen ion implantation induced microstructural changes and electrical conductivity in Bakelite RPC detector material

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, K. V. Aneesh, E-mail: aneesh1098@gmail.com; Ravikumar, H. B., E-mail: hbr@physics.uni-mysore.ac.in [Department of Studies in Physics, University of Mysore, Mysore-570006 (India); Ranganathaiah, C., E-mail: cr@physics.uni-mysore.ac.in [Govt. Research Centre, Sahyadri Educational Institutions, Mangalore-575007 (India); Kumarswamy, G. N., E-mail: kumy79@gmail.com [Department of Studies in Physics, Amrita Vishwa Vidyapeetham, Bangalore-560035 (India)

    2016-05-06

    In order to explore the structural modification induced electrical conductivity, samples of Bakelite Resistive Plate Chamber (RPC) detector materials were exposed to 100 keV Oxygen ion in the fluences of 10{sup 12}, 10{sup 13}, 10{sup 14} and 10{sup 15} ions/cm{sup 2}. Ion implantation induced microstructural changes have been studied using Positron Annihilation Lifetime Spectroscopy (PALS) and X-Ray Diffraction (XRD) techniques. Positron lifetime parameters viz., o-Ps lifetime and its intensity shows the deposition of high energy interior track and chain scission leads to the formation of radicals, secondary ions and electrons at lower ion implantation fluences (10{sup 12} to10{sup 14} ions/cm{sup 2}) followed by cross-linking at 10{sup 15} ions/cm{sup 2} fluence due to the radical reactions. The reduction in electrical conductivity of Bakelite detector material is correlated to the conducting pathways and cross-links in the polymer matrix. The appropriate implantation energy and fluence of Oxygen ion on polymer based Bakelite RPC detector material may reduce the leakage current, improves the efficiency, time resolution and thereby rectify the aging crisis of the RPC detectors.

  3. Change of electrical conductivity of Ar welding arc under resonant absorption of laser radiation

    Science.gov (United States)

    Kozakov, R.; Emde, B.; Pipa, A. V.; Huse, M.; Uhrlandt, D.; Hermsdorf, J.; Wesling, V.

    2015-03-01

    Experimental investigations of the impact of resonant laser absorption by a tungsten inert gas welding arc in argon are presented. The intensity increase of the arc’s radiation between the laser entrance height and the anode are observed, as well as the variation of arc voltage due to the presence of the laser beam. High-speed camera recordings from different directions combined with absolutely calibrated spectroscopic measurements allow the reconstruction of the three-dimensional emission coefficient profiles without the assumption of axial symmetry. The obtained data are evaluated within the framework of local thermodynamic equilibrium. The local increase in the temperature and conductivity due to the influence of the laser is determined. Changes in the electrical conductivity obtained from the optical measurements coincide well with the measured voltage drop, and show significant redistribution of the current density profile near the anode in particular.

  4. Methods of Using a Magnetic Field Response Sensor Within Closed, Electrically Conductive Containers

    Science.gov (United States)

    Woodward, Stanley E.; Taylor, Bryant D.

    2010-01-01

    Magnetic field response sensors are a class of sensors that are powered via oscillating magnetic fields, and when electrically active, respond with their own magnetic fields with attributes dependent upon the magnitude of the physical quantity being measured. A magnetic field response recorder powers and interrogates the magnetic sensors [see Magnetic-Field-Response Measurement- Acquisition System, NASA Tech Briefs Vol. 30, No, 6 (June 2006, page 28)]. Electrically conductive containers have low transmissivity for radio frequency (RF) energy and thus present problems for magnetic field response sensors. It is necessary in some applications to have a magnetic field response sensor s capacitor placed in these containers. Proximity to conductive surfaces alters the inductance and capacitance of the sensors. As the sensor gets closer to a conductive surface, the electric field and magnetic field energy of the sensor is reduced due to eddy currents being induced in the conductive surface. Therefore, the capacitors and inductors cannot be affixed to a conductive surface or embedded in a conductive material. It is necessary to have a fixed separation away from the conductive material. The minimum distance for separation is determined by the desired sensor response signal to noise ratio. Although the inductance is less than what it would be if it were not in proximity to the conductive surface, the inductance is fixed. As long as the inductance is fixed, all variations of the magnetic field response are due to capacitance changes. Numerous variations of inductor mounting can be utilized, such as providing a housing that provides separation from the conductive material as well as protection from impact damage. The sensor can be on the same flexible substrate with a narrow throat portion of the sensor between the inductor and the capacitor, Figure 1. The throat is of sufficient length to allow the capacitor to be appropriately placed within the container and the inductor

  5. The electrical conductivities of the DSS-13 beam-waveguide antenna shroud material and other antenna reflector surface materials

    Science.gov (United States)

    Otoshi, T. Y.; Franco, M. M.; Reilly, H. F., Jr.

    1992-01-01

    A significant amount of noise temperature can potentially be generated by currently unknown dissipative losses in the beam waveguide (BWG) shroud. The amount of noise temperature contribution from this source is currently being studied. In conjunction with this study, electrical conductivity measurements were made on samples of the DSS-13 BWG shroud material at 8.420 GHz. The effective conductivities of unpainted and painted samples of the BWG shroud were measured to be 0.01 x 10(exp 7) and 0.0036 x 10(exp 7) mhos/m, respectively. This value may be compared with 5.66 x 10(exp 7) mhos/m for high conductivity copper.

  6. Effects of a radially varying electrical conductivity on 3D numerical dynamos

    CERN Document Server

    Gomez-Perez, Natalia; Wicht, Johannes; 10.1016/j.pepi.2010.03.006

    2010-01-01

    The transition from liquid metal to silicate rock in the cores of the terrestrial planets is likely to be accompanied by a gradient in the composition of the outer core liquid. The electrical conductivity of a volatile enriched liquid alloy can be substantially lower than a light-element-depleted fluid found close to the inner core boundary. In this paper, we investigate the effect of radially variable electrical conductivity on planetary dynamo action using an electrical conductivity that decreases exponentially as a function of radius. We find that numerical solutions with continuous, radially outward decreasing electrical conductivity profiles result in strongly modified flow and magnetic field dynamics, compared to solutions with homogeneous electrical conductivity. The force balances at the top of the simulated fluid determine the overall character of the flow. The relationship between Coriolis and Lorentz forces near the outer boundary controls the flow and magnetic field intensity and morphology of the...

  7. An Approach to Model Earth Conductivity Structures with Lateral Changes for Calculating Induced Currents and Geoelectric Fields during Geomagnetic Disturbances

    Directory of Open Access Journals (Sweden)

    Bo Dong

    2015-01-01

    Full Text Available During geomagnetic disturbances, the telluric currents which are driven by the induced electric fields will flow in conductive Earth. An approach to model the Earth conductivity structures with lateral conductivity changes for calculating geoelectric fields is presented in this paper. Numerical results, which are obtained by the Finite Element Method (FEM with a planar grid in two-dimensional modelling and a solid grid in three-dimensional modelling, are compared, and the flow of induced telluric currents in different conductivity regions is demonstrated. Then a three-dimensional conductivity structure is modelled and the induced currents in different depths and the geoelectric field at the Earth’s surface are shown. The geovoltages by integrating the geoelectric field along specific paths can be obtained, which are very important regarding calculations of geomagnetically induced currents (GIC in ground-based technical networks, such as power systems.

  8. ESTIMATION OF INDUCED CURRENTS IN THE SHIELDS OF ELECTRICAL POWER CABLES WITH XLPE INSULATION

    Directory of Open Access Journals (Sweden)

    I. V. Oleksyuk

    2015-01-01

    Full Text Available Electrical power cables with Cross-Linked Polyethylene Insulation (XLPE-insulation are currently utilized in projects of the electric-power supply systems of modern facilities. However, the higher costs, the incomplete design, installation and maintenance normativetechnical basis as well as certain constructional features of the XLPE-insulated cable lines hinder their large-scale implementation.The cables with XLPE insulation are mostly produced in a single-conductor core version being provided with a composite copper shield whose cross-section may vary while the electric conductor cross-section remains uniform. Earthing the cable shields on both sides causes the flow of electricity in them. The course of operational service of the XLPE-insulated cable lines revealed the following fact – the currents induced in the cable shields can run up to the levels commeasurable with those in the conductor-cores themselves. That, in its turn, leads to electrical safety-level reduction, cable lines failure, and economic losses. The currents induced in the shields may occur both in symmetric (normal and emergency and asymmetric operating modes of the power grid with values of the induced currents reaching 80 % of the conducting core currents. Many factors affect the level of the current induced in the shield: the midpoint conductor modes, the values of the core longitudinal currents in the normal and emergency operating modes, failure mode, the cross-section area of the shield, the cables mutual disposition, and the distance between them.The paper claims experimental existence conformation of the cable-shield current induced by that in the conductor-core and demonstrates its measured value. The author establishes that induction of dangerous currents in the cable shields demands elaboration of measures on reducing their level.

  9. Electrical conductivity of the dusty plasma in the Enceladus plume

    Science.gov (United States)

    Yaroshenko, V. V.; Lühr, H.

    2016-11-01

    The plasma conductivity is an important issue for understanding the magnetic field structure registered by Cassini in the Enceladus proximity. We have revise the conductivity mechanism to incorporate the plume nanograins as a new plasma species and take into account the relevant collisional processes including those accounting for the momentum exchange between the charged dust and co-rotating ions. It is concluded that in the Enceladus plume the dust dynamics affects the Pedersen and Hall conductivity more efficiently than the electron depletion associated with the presence of the negatively charged dust as has been suggested by Simon et al. (Simon, S., Saur, J., Kriegel, H., Neubauer, F. M., Motschmann, U., and Dougherty, U. [2011] J. Geophys. Res., 116, A04221, doi:10.1029/2010JA016338). The electron depletion remains a decisive factor for only the parallel conductivity. In the parameter regime relevant for the Enceladus plume, one finds increase of the Pedersen and decrease of the parallel components, whereas for the Hall conductivity the charged dust changes both - its value and the sign. The associated reversed Hall effect depends significantly upon the local dust-to-plasma density ratio. An onset of the reversed Hall effect appears to be restricted to outer parts of the Enceladus plume. The results obtained can significantly modify Enceladus' Alfvén wing structure and thus be useful for interpretations of the magnetic field perturbations registered by the Cassini Magnetometer during the close Enceladus flybys.

  10. Advanced computer techniques for inverse modeling of electric current in cardiac tissue

    Energy Technology Data Exchange (ETDEWEB)

    Hutchinson, S.A.; Romero, L.A.; Diegert, C.F.

    1996-08-01

    For many years, ECG`s and vector cardiograms have been the tools of choice for non-invasive diagnosis of cardiac conduction problems, such as found in reentrant tachycardia or Wolff-Parkinson-White (WPW) syndrome. Through skillful analysis of these skin-surface measurements of cardiac generated electric currents, a physician can deduce the general location of heart conduction irregularities. Using a combination of high-fidelity geometry modeling, advanced mathematical algorithms and massively parallel computing, Sandia`s approach would provide much more accurate information and thus allow the physician to pinpoint the source of an arrhythmia or abnormal conduction pathway.

  11. Iridium satellites help map electrical currents in space

    Science.gov (United States)

    Showstack, Randy

    The satellite constellation of Iridium LLC, which filed for Chapter 11 bankruptcy in 1999 after it failed to win enough business for its commercial satellite communications services, is still orbiting at an altitude of about 780 kilometers. Now, however, the satellites are helping to write a new chapter in understanding space weather.Magnetometers onboard each of the system's 66 polar-orbiting satellites are working in conjunction with the high-frequency, multinational Super Dual Auroral Radar Network, or SuperDARN, to provide the first continuous measurements of electrical currents between Earth's upper atmosphere and space. These tools also are generating the first global maps of electrical power flowing into the polar upper atmosphere.

  12. Electric machine and current source inverter drive system

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, John S

    2014-06-24

    A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

  13. Alternating Current All-electrical Gun Control System in Tanks

    Directory of Open Access Journals (Sweden)

    Zang Kemao

    2004-07-01

    Full Text Available The ac all-electrical gun control system is composed of permanent magnetic synchronous machine-drive control systems and the ball-screw by replacing the complicated electrohydraulic systems. At the same time, the variable-structure system with sliding modes makes the gun control systems to have higher performances using the only rate flexure gyroscope. Thereby, vehicle hull gyroscope and angular gyroscope are left out.The new ac all-electrical gun control systems developed are reduced by 40 per cent in weight, decreased by 30 per cent in volume, increased by 35 per cent in efficiency, and enhanced by three times in service life as compared to the current gun control systems.

  14. Control of Hall angle of Skyrmion driven by electric current

    Science.gov (United States)

    Gao-Bin, Liu; Da, Li; de Chatel, P. F.; Jian, Wang; Wei, Liu; Zhi-Dong, Zhang

    2016-06-01

    Skyrmions are very promising for applications in spintronics and magnetic memory. It is desired to manipulate and operate a single skyrmion. Here we report on the thermal effect on the motion of current-driven magnetic Skyrmions in magnetic metal. The results show that the magnon current induced by the thermal gradient acts on Skyrmions via magnonic spin-transfer torque, an effect of the transverse and longitudinal Skyrmions drift velocities, thus leading to the effective manipulation of the Hall angle through the ratio of thermal gradient to electric current density, which can be used as a Skyrmion valve. Project supported by the National Natural Science Foundation of China (Grant No. 51331006) and the Fund from the Chinese Academy of Sciences (Grant No. KJZD-EW-M05).

  15. Electrical conductance through nanocontacts between fcc(100) electrodes of gold

    Energy Technology Data Exchange (ETDEWEB)

    Koudela, Daniela; Lopez-Acevedo, Olga; Walter, Michael [Department of Physics, Nanoscience Center, P.O. Box 35, FIN-40014 University of Jyvaeskylae (Finland); Haekkinen, Hannu [Department of Physics, Nanoscience Center, P.O. Box 35, FIN-40014 University of Jyvaeskylae (Finland); Department of Chemistry, P.O. Box 35, FIN-40014 University of Jyvaeskylae (Finland)

    2008-07-01

    Both experimental and theoretical work has been done to explain conductance curves for metal nanowires, giving presently a good model that allows to explain experimental results microscopically. For one atom contacts it has moreover been shown, theoretically and experimentally, a strong relation between the number of valence orbitals of the single atom and the maximum value of the conductance that can be obtained. We have studied Au nanowires of different lengths connected to fcc(100) tips corresponding to possible configurations in the elongation process. For those systems we have calculated the self-consistent potential obtained with Density Functional Theory and used it to calculate the conductance using the recursion-transfer-matrix method. Our results show that though gold has formally only one valence electron (6s), for wires shorter than 3 atoms there are 3 (partially) open eigenmodes.

  16. Studying the influence of pore water electrical conductivity on the formation factor, as estimated based on electrical methods

    Energy Technology Data Exchange (ETDEWEB)

    Loefgren, Martin (Kemakta Konsult AB, Stockholm (Sweden)); Vecernik, Petr; Havlova, Vaclava (Waste Disposal Dept., Nuclear Research Institute Rez plc. (Czech Republic))

    2009-11-15

    In this report the geometric formation factor, as obtained in tracer tests, is compared with the apparent formation factor, as obtained by electrical methods. This should provide information on the data uncertainty associated with the electrical methods utilised in situ within the SKB site investigation programme. Generally, if directly estimating the formation factor from the apparent formation factor, there is a risk of substantial overestimations. This is especially the case at shallow depth at the Forsmark and Oskarshamn sites, where the groundwater is of low salinity. This study is performed on nine drill core samples from the Forsmark and Oskarshamn sites. The formation factor and apparent formation factor of these samples have previously been determined by the through diffusion method, using HTO as the tracer, and by the electrical resistivity method, as part of the site investigation programme. The study is divided in two parts where part 2 was performed successfully, while part 1 suffered from problems. In part 2, eight rock samples were saturated by either a 0.05 or 0.1 M NaCl electrolyte. These electrolytes should represent the groundwater at repository depth. The formation factor of these samples was obtained by the through-electromigration (TEM) method, using iodide as the tracer. In addition, the apparent formation factors were obtained by electrical resistivity methods using direct current and alternating current at 10, 100, and 2,000 Hz. The measurements were performed in duplicates or triplicates, and generally a good reproducibility was achieved. As expected, the apparent formation factors were a few times larger than the TEM formation factor for the same sample. The ratio of the apparent formation factors and TEM formation factors range between about 2 and 12, where larger ratios were found for rock samples of low formation factors. The results were compared with modelled apparent formation factors, where input data were a range of formation

  17. Effect of neutron flux on the frequency dependencies of electrical conductivity of silicon nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Huseynov, E.; Garibli, A., E-mail: elchin.huse@yahoo.com [National Nuclear Research Center, Department of Nanotechnology and Radiation Material Science, 1073, Inshaatchilar pr. 4, Baku (Azerbaijan)

    2016-11-01

    It has been reviewed the frequency dependencies of electrical conductivity of nanoparticles affected by neutron flux at different times and initial state, at various constant temperatures such as 100, 200, 300 and 400 K. Measurements have been carried out at each temperature at the different 97 values of frequency in the 1 Hz - 1 MHz range. From interdependence between real and imaginary parts of electrical conductivity it has been determined the type of conductivity. Moreover, in the work it is given the mechanism of electrical conductivity according to the obtained results. (Author)

  18. Evaluation of Electrical and Thermal Conductivity of Polymeric ...

    African Journals Online (AJOL)

    PROF HORSFALL

    application was compressed in a wooden mold to form tablets of the doped polymers. On testing ... as in most African countries owing to the dual problem of increase in waste .... polymers or plastics is 1016 Ωm while conductive additives can ...

  19. Atrioventricular conduction in mammalian species: Hemodynamic and electrical scaling

    NARCIS (Netherlands)

    Meijler, F.L.; Billette, J.; Jalife, J.; Kik, M.J.L.; Reiber, J.H.C.; Stokhof, A.A.; Westenberg, J.J.M.; Wassenaar, C.; Strackee, J.

    2005-01-01

    OBJECTIVES The purpose of this study was to investigate scaling of the duration of late diastolic left ventricular (LV) filling in relation to AV conduction time (delay) (PR interval on the ECG) in mammals. BACKGROUND From mouse to whale, AV delay increases 10-fold, whereas body mass increases one m

  20. Ultra-broad-band electrical spectroscopy of soils and sediments—a combined permittivity and conductivity model

    Science.gov (United States)

    Loewer, M.; Günther, T.; Igel, J.; Kruschwitz, S.; Martin, T.; Wagner, N.

    2017-09-01

    We combined two completely different methods measuring the frequency-dependent electrical properties of moist porous materials in order to receive an extraordinary large frequency spectrum. In the low-frequency (LF) range, complex electrical resistivity between 1 mHz and 45 kHz was measured for three different soils and sandstone, using the spectral induced polarization (SIP) method with a four electrode cell. In the high-frequency (HF) radio to microwave range, complex dielectric permittivity was measured between 1 MHz and 10 GHz for the same samples using dielectric spectroscopy by means of the coaxial transmission line technique. The combined data sets cover 13 orders of magnitude and were transferred into their equivalent expressions: the complex effective dielectric permittivity and the complex effective electrical conductivity. We applied the Kramers-Kronig relation in order to justify the validity of the data combination. A new phenomenological model that consists of both dielectric permittivity and electrical conductivity terms in a Debye- and Cole-Cole-type manner was fitted to the spectra. The combined permittivity and conductivity model accounts for the most common representations of the physical quantities with respect to the individual measuring method. A maximum number of four relaxation processes was identified in the analysed frequency range. Among these are the free water and different interfacial relaxation processes, the Maxwell-Wagner effect, the counterion relaxation in the electrical double layer and the direct-current electrical conductivity. There is evidence that free water relaxation does not affect the electrical response in the SIP range. Moreover, direct current conductivity contribution (bulk and interface) dominates the losses in the HF range. Interfacial relaxation processes with relaxations in the HF range are broadly distributed down to the LF range. The slowest observed process in the LF range has a minor contribution to the HF