Recommendations for energy conservation standards for new residential buildings - volume 3: Introduction and Background to the Standard Development Effort

Energy Technology Data Exchange (ETDEWEB)

1989-05-01

The Energy Conservation for New Buildings Act of 1976, as amended, 42 U.S.C Section 6831 et. seq. requires the US Department of Energy to issue energy conservation standards for the design of new residential and commercial buildings. The standards will be mandatory only for the design of new federal buildings, and will serve as voluntary guidelines for the design of new non-federal buildings. This report documents the development and testing of a set of recommendations, from the American Society of Heating, Refrigeration and Air Conditioning Engineers, Inc. (ASHRAE) Special Projects Committee No. 53, designed to provide the technical foundation for the Congressionally-mandated energy standard for new residential buildings. The recommendations have been developed over the past 25 months by a multidisciplinary project team, under the management of the US Department of Energy and its prime contractor, Pacific Northwest Laboratory. Volume III -- Introduction and Background to the Standard Development Effort is a description of the Standard development process and contains the rationale for the general approach and specific criteria contained within the recommendations.

Building technologies program. 1995 annual report

Energy Technology Data Exchange (ETDEWEB)

Selkowitz, S.E.

1996-05-01

The 1995 annual report discusses laboratory activities in the Building Technology Program. The report is divided into four categories: windows and daylighting, lighting systems, building energy simulation, and advanced building systems. The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building-sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. Past efforts have focused on windows and lighting, and on the simulation tools needed to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. Current research is based on an integrated systems and life-cycle perspective to create cost-effective solutions for more energy-efficient, comfortable, and productive work and living environments. Sixteen subprograms are described in the report.

Non-Destructive Current Sensing for Energy Efficiency Monitoring in Buildings with Environmental Certification.

Science.gov (United States)

Mota, Lia Toledo Moreira; Mota, Alexandre de Assis; Coiado, Lorenzo Campos

2015-07-10

Nowadays, buildings environmental certifications encourage the implementation of initiatives aiming to increase energy efficiency in buildings. In these certification systems, increased energy efficiency arising from such initiatives must be demonstrated. Thus, a challenge to be faced is how to check the increase in energy efficiency related to each of the employed initiatives without a considerable building retrofit. In this context, this work presents a non-destructive method for electric current sensing to assess implemented initiatives to increase energy efficiency in buildings with environmental certification. This method proposes the use of a sensor that can be installed directly in the low voltage electrical circuit conductors that are powering the initiative under evaluation, without the need for reforms that result in significant costs, repair, and maintenance. The proposed sensor consists of three elements: an air-core transformer current sensor, an amplifying/filtering stage, and a microprocessor. A prototype of the proposed sensor was developed and tests were performed to validate this sensor. Based on laboratory tests, it was possible to characterize the proposed current sensor with respect to the number of turns and cross-sectional area of the primary and secondary coils. Furthermore, using the Least Squares Method, it was possible to determine the efficiency of the air core transformer current sensor (the best efficiency found, considering different test conditions, was 2%), which leads to a linear output response.

Non-Destructive Current Sensing for Energy Efficiency Monitoring in Buildings with Environmental Certification

Science.gov (United States)

Mota, Lia Toledo Moreira; Mota, Alexandre de Assis; Coiado, Lorenzo Campos

2015-01-01

Nowadays, buildings environmental certifications encourage the implementation of initiatives aiming to increase energy efficiency in buildings. In these certification systems, increased energy efficiency arising from such initiatives must be demonstrated. Thus, a challenge to be faced is how to check the increase in energy efficiency related to each of the employed initiatives without a considerable building retrofit. In this context, this work presents a non-destructive method for electric current sensing to assess implemented initiatives to increase energy efficiency in buildings with environmental certification. This method proposes the use of a sensor that can be installed directly in the low voltage electrical circuit conductors that are powering the initiative under evaluation, without the need for reforms that result in significant costs, repair, and maintenance. The proposed sensor consists of three elements: an air-core transformer current sensor, an amplifying/filtering stage, and a microprocessor. A prototype of the proposed sensor was developed and tests were performed to validate this sensor. Based on laboratory tests, it was possible to characterize the proposed current sensor with respect to the number of turns and cross-sectional area of the primary and secondary coils. Furthermore, using the Least Squares Method, it was possible to determine the efficiency of the air core transformer current sensor (the best efficiency found, considering different test conditions, was 2%), which leads to a linear output response. PMID:26184208

Non-Destructive Current Sensing for Energy Efficiency Monitoring in Buildings with Environmental Certification

Directory of Open Access Journals (Sweden)

Lia Toledo Moreira Mota

2015-07-01

Full Text Available Nowadays, buildings environmental certifications encourage the implementation of initiatives aiming to increase energy efficiency in buildings. In these certification systems, increased energy efficiency arising from such initiatives must be demonstrated. Thus, a challenge to be faced is how to check the increase in energy efficiency related to each of the employed initiatives without a considerable building retrofit. In this context, this work presents a non-destructive method for electric current sensing to assess implemented initiatives to increase energy efficiency in buildings with environmental certification. This method proposes the use of a sensor that can be installed directly in the low voltage electrical circuit conductors that are powering the initiative under evaluation, without the need for reforms that result in significant costs, repair, and maintenance. The proposed sensor consists of three elements: an air-core transformer current sensor, an amplifying/filtering stage, and a microprocessor. A prototype of the proposed sensor was developed and tests were performed to validate this sensor. Based on laboratory tests, it was possible to characterize the proposed current sensor with respect to the number of turns and cross-sectional area of the primary and secondary coils. Furthermore, using the Least Squares Method, it was possible to determine the efficiency of the air core transformer current sensor (the best efficiency found, considering different test conditions, was 2%, which leads to a linear output response.

Case studies of capacity building for biodiversity monitoring: Chapter 13

Science.gov (United States)

Schmeller, Dirk S.; Arvanitidis, Christos; Böhm, Monika; Brummitt, Neil; Chatzinikolaou, Eva; Costello, Mark J.; Ding, Hui; Gill, Michael J.; Haase, Peter; Juillard, Romain; García-Moreno, Jaime; Pettorelli, Nathalie; Peng, Cui; Riginos, Corinna; Schmiedel, Ute; Simaika, John P.; Waterman, Carly; Wu, Jun; Xu, Haigen; Belnap, Jayne; Walters, Michele; Scholes, Robert J.

2017-01-01

Monitoring the status and trends of species is critical to their conservation and management. However, the current state of biodiversity monitoring is insufficient to detect such for most species and habitats, other than in a few localised areas. One of the biggest obstacles to adequate monitoring is the lack of local capacity to carry out such programs. Thus, building the capacity to do such monitoring is imperative. We here highlight different biodiversity monitoring efforts to illustrate how capacity building efforts are being conducted at different geographic scales and under a range of resource, literacy, and training constraints. Accordingly, we include examples of monitoring efforts from within countries (Kenya, France, and China), within regions (Central America and the Arctic) and larger capacity building programs including EDGE (Evolutionarily Distinct and Globally Endangered) of Existence and the National Red List Alliance.

Indoor environmental quality and ventilation in U.S. office buildings: A view of current issues

Energy Technology Data Exchange (ETDEWEB)

Fisk, W.J.

1994-11-01

Much of the current focus on indoor environmental quality and ventilation in US office buildings is a response to sick building syndrome and occupant complaints about building-related health symptoms, poor indoor air quality, and thermal discomfort. The authors know that serious ``sick-building`` problems occur in a significant number of US office buildings and that a significant proportion of the occupants in many normal (non-sick) buildings report building-related health symptoms. Concerns about the health effects of environmental tobacco smoke have also focused attention on the indoor environment. The major responses of industry and governments, underway at the present time, are to restrict smoking in offices, to attempt to reduce the emissions of indoor pollutants, and to improve the operation of heating, ventilating and air conditioning (HVAC) systems. Better air filtration, improved HVAC commissioning and maintenance, and increased provisions for individual control of HVAC are some of the improvements in HVAC that are currently being, evaluated. In the future, the potential for improved productivity and reduced airborne transmission of infectious disease may become the major driving force for improved indoor environments.

Methodological Framework for Analysis of Buildings-Related Programs: The GPRA Metrics Effort

Energy Technology Data Exchange (ETDEWEB)

Elliott, Douglas B.; Anderson, Dave M.; Belzer, David B.; Cort, Katherine A.; Dirks, James A.; Hostick, Donna J.

2004-06-18

The requirements of the Government Performance and Results Act (GPRA) of 1993 mandate the reporting of outcomes expected to result from programs of the Federal government. The U.S. Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE) develops official metrics for its 11 major programs using its Office of Planning, Budget Formulation, and Analysis (OPBFA). OPBFA conducts an annual integrated modeling analysis to produce estimates of the energy, environmental, and financial benefits expected from EERE’s budget request. Two of EERE’s major programs include the Building Technologies Program (BT) and Office of Weatherization and Intergovernmental Program (WIP). Pacific Northwest National Laboratory (PNNL) supports the OPBFA effort by developing the program characterizations and other market information affecting these programs that is necessary to provide input to the EERE integrated modeling analysis. Throughout the report we refer to these programs as “buildings-related” programs, because the approach is not limited in application to BT or WIP. To adequately support OPBFA in the development of official GPRA metrics, PNNL communicates with the various activities and projects in BT and WIP to determine how best to characterize their activities planned for the upcoming budget request. PNNL then analyzes these projects to determine what the results of the characterizations would imply for energy markets, technology markets, and consumer behavior. This is accomplished by developing nonintegrated estimates of energy, environmental, and financial benefits (i.e., outcomes) of the technologies and practices expected to result from the budget request. These characterizations and nonintegrated modeling results are provided to OPBFA as inputs to the official benefits estimates developed for the Federal Budget. This report documents the approach and methodology used to estimate future energy, environmental, and financial benefits

Capacity Building for School Development: Current Problems and Future Challenges

Science.gov (United States)

Ho, Dora; Lee, Moosung

2016-01-01

This article offers a theoretical discussion on the current problems and future challenges of school capacity building in early childhood education (ECE), aiming to highlight some key areas for future research. In recent years, there has been a notable policy shift from monitoring quality through inspection to improving quality through school…

Lost Opportunities in the Buildings Sector: Energy-Efficiency Analysis and Results

Energy Technology Data Exchange (ETDEWEB)

Dirks, James A.; Anderson, David M.; Hostick, Donna J.; Belzer, David B.; Cort, Katherine A.

2008-09-12

This report summarizes the results and the assumptions used in an analysis of the potential “lost efficiency opportunities” in the buildings sector. These targets of opportunity are those end-uses, applications, practices, and portions of the buildings market which are not currently being addressed, or addressed fully, by the Building Technologies Program (BTP) due to lack of resources. The lost opportunities, while a significant increase in effort and impact in the buildings sector, still represent only a small portion of the full technical potential for energy efficiency in buildings.

Efforts to control radiation build-up in Ringhals

Energy Technology Data Exchange (ETDEWEB)

Egner, K.; Aronsson, P.O.; Erixon, O. [Vattenfall AB, Vaeroebacka (Sweden)

1995-03-01

It is well known that good control of the primary chemistry in a PWR is essential in order to minimize material problems and fuel damages. It has also been well established that the water chemistry has a great influence on accumulation of corrosion products on the fuel and the radiation build-up on primary system surfaces. Ringhals was one of the pioneers to increase operating pH in order to reduce radiation build-up and has now been operating for ten years with pH at 7.4 or (in later years) 7.2. Our experience is favourable and includes low radiation levels in the new (1989) steam generators of Ringhals 2. Ringhals 4 has operated almost its whole life at pH 7.2 or higher and it remains one of the cleanest PWRs of its vintage. In addition to strict adherence to a stable operating chemistry, Ringhals is now working on a program with the aim to find optimum shut-down and start-up chemistry to reduce activity levels in the primary systems. A particular goal is to use the shut-down and start-up chemistry at the 1994 outage in Ringhals 3 in order to reduce doserates in preparation for the planned steam generator replacement in 1995. The paper summarizes the experience to date of the established operating chemistry, on-going tests with modified shut-down and start-up chemistry and other measures to limit or reduce the activity build-up.

Efforts to control radiation build-up in Ringhals

International Nuclear Information System (INIS)

Egner, K.; Aronsson, P.O.; Erixon, O.

1995-01-01

It is well known that good control of the primary chemistry in a PWR is essential in order to minimize material problems and fuel damages. It has also been well established that the water chemistry has a great influence on accumulation of corrosion products on the fuel and the radiation build-up on primary system surfaces. Ringhals was one of the pioneers to increase operating pH in order to reduce radiation build-up and has now been operating for ten years with pH at 7.4 or (in later years) 7.2. Our experience is favourable and includes low radiation levels in the new (1989) steam generators of Ringhals 2. Ringhals 4 has operated almost its whole life at pH 7.2 or higher and it remains one of the cleanest PWRs of its vintage. In addition to strict adherence to a stable operating chemistry, Ringhals is now working on a program with the aim to find optimum shut-down and start-up chemistry to reduce activity levels in the primary systems. A particular goal is to use the shut-down and start-up chemistry at the 1994 outage in Ringhals 3 in order to reduce doserates in preparation for the planned steam generator replacement in 1995. The paper summarizes the experience to date of the established operating chemistry, on-going tests with modified shut-down and start-up chemistry and other measures to limit or reduce the activity build-up

The effect of plasma minor-radius expansion in the current build-up phase of a large tokamak

International Nuclear Information System (INIS)

Kobayashi, Tomofumi; Tazima, Teruhiko; Tani, Keiji; Tamura, Sanae

1977-03-01

A plasma simulation code has been developed to study the plasma current build-up process in JT-60. Plasma simulation is made with a model which represents well overall plasma behavior of the present-day tokamaks. The external electric circuit is taken into consideration in simulation calculation. An emphasis is placed on the simulation of minor-radius expansion of the plasma and behavior of neutral particles in the plasma during current build-up. A calculation with typical parameters of JT-60 shows a week skin distribution in the current density and the electron temperature, if the minor radius of the plasma expands with build-up of the plasma current. (auth.)

Building Evidence for Health: Green Buildings, Current Science, and Future Challenges.

Science.gov (United States)

Cedeño-Laurent, J G; Williams, A; MacNaughton, P; Cao, X; Eitland, E; Spengler, J; Allen, J

2018-04-01

Civilizational challenges have questioned the status quo of energy and material consumption by humans. From the built environment perspective, a response to these challenges was the creation of green buildings. Although the revolutionary capacity of the green building movement has elevated the expectations of new commercial construction, its rate of implementation has secluded the majority of the population from its benefits. Beyond reductions in energy usage and increases in market value, the main strength of green buildings may be the procurement of healthier building environments. Further pursuing the right to healthy indoor environments could help the green building movement to attain its full potential as a transformational public health tool. On the basis of 40 years of research on indoor environmental quality, we present a summary of nine environment elements that are foundational to human health. We posit the role of green buildings as a critical research platform within a novel sustainability framework based on social-environmental capital assets.

Current perception of wooden building in Slovenia

OpenAIRE

Kitek Kuzman , Manja; Hrovatin, Jasna

2007-01-01

In residential buildings, prefabricated wooden houses constitute minor part ofall buildings in Slovenia. The reasons pertaining to the relatively low occurrence of prefabricated wooden buildings today are assessed in the presentstudy. The Slovenian public opinion survey on wooden building 2006 examined, among other issues, public attitude towards wooden buildings and itsadvantages. Data collection was performed by CATI method. Results of publicresearch clearly indicate the users' lack of know...

A comprehensive framework to quantify energy savings potential from improved operations of commercial building stocks

International Nuclear Information System (INIS)

Azar, Elie; Menassa, Carol C.

2014-01-01

While studies highlight the significant impact of actions performed by occupants and facility managers on building energy performance, current policies ignore the importance of human actions and the potential energy savings from a more efficient operation of building systems. This is mainly attributed to the lack of methods that evaluate non-technological drivers of energy use for large stocks of commercial buildings to support policy making efforts. Therefore, this study proposes a scientific approach to quantifying the energy savings potential due to improved operations of any stock of commercial buildings. The proposed framework combines energy modeling techniques, studies on human actions in buildings, and surveying and sampling methods. The contributions of this study to energy policy are significant as they reinforce the role of human actions in energy conservation, and support efforts to integrate operation-focused solutions in energy conservation policy frameworks. The framework's capabilities are illustrated in a case study performed on the stock of office buildings in the United States (US). Results indicate a potential 21 percent reduction in the current energy use levels of these buildings through realistic changes in current building operation patterns. - Highlights: • Human actions highly influence energy performance of commercial building stocks. • It is challenging to quantify operation-related energy savings potential. • The proposed framework quantifies potential energy savings from improved operations. • The framework can be applied on any stock of commercial buildings. • Applications include support for operation-focused solutions in energy policies

Estimating Fallout Building Attributes from Architectural Features and Global Earthquake Model (GEM) Building Descriptions

Energy Technology Data Exchange (ETDEWEB)

Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, Staci R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-03-01

A nuclear explosion has the potential to injure or kill tens to hundreds of thousands (or more) of people through exposure to fallout (external gamma) radiation. Existing buildings can protect their occupants (reducing fallout radiation exposures) by placing material and distance between fallout particles and individuals indoors. Prior efforts have determined an initial set of building attributes suitable to reasonably assess a given building’s protection against fallout radiation. The current work provides methods to determine the quantitative values for these attributes from (a) common architectural features and data and (b) buildings described using the Global Earthquake Model (GEM) taxonomy. These methods will be used to improve estimates of fallout protection for operational US Department of Defense (DoD) and US Department of Energy (DOE) consequence assessment models.

Capacity building efforts and perceptions for wildlife surveillance to detect zoonotic pathogens: comparing stakeholder perspectives.

Science.gov (United States)

Schwind, Jessica S; Goldstein, Tracey; Thomas, Kate; Mazet, Jonna A K; Smith, Woutrina A

2014-07-04

The capacity to conduct zoonotic pathogen surveillance in wildlife is critical for the recognition and identification of emerging health threats. The PREDICT project, a component of United States Agency for International Development's Emerging Pandemic Threats program, has introduced capacity building efforts to increase zoonotic pathogen surveillance in wildlife in global 'hot spot' regions where zoonotic disease emergence is likely to occur. Understanding priorities, challenges, and opportunities from the perspectives of the stakeholders is a key component of any successful capacity building program. A survey was administered to wildlife officials and to PREDICT-implementing in-country project scientists in 16 participating countries in order to identify similarities and differences in perspectives between the groups regarding capacity needs for zoonotic pathogen surveillance in wildlife. Both stakeholder groups identified some human-animal interfaces (i.e. areas of high contact between wildlife and humans with the potential risk for disease transmission), such as hunting and markets, as important for ongoing targeting of wildlife surveillance. Similarly, findings regarding challenges across stakeholder groups showed some agreement in that a lack of sustainable funding across regions was the greatest challenge for conducting wildlife surveillance for zoonotic pathogens (wildlife officials: 96% and project scientists: 81%). However, the opportunity for improving zoonotic pathogen surveillance capacity identified most frequently by wildlife officials as important was increasing communication or coordination among agencies, sectors, or regions (100% of wildlife officials), whereas the most frequent opportunities identified as important by project scientists were increasing human capacity, increasing laboratory capacity, and the growing interest or awareness regarding wildlife disease or surveillance programs (all identified by 69% of project scientists). A One

Overview of the current spectroscopy effort on the Livermore electron beam ion traps

International Nuclear Information System (INIS)

Beiersdorfer, P.; Lopez-Urrutia, J.C.; Brown, G.

1995-01-01

An overview is given of the current spectroscopic effort on the Livermore electron beam ion trap facilities. The effort focuses on four aspects: spectral line position, line intensity, temporal evolution, and line shape. Examples of line position measurements include studies of the K-shell transitions in heliumlike Kr 34+ and the 2s-2p intrashell transitions in lithiumlike Th 87+ and U 89+ , which provide benchmark values for testing the theory of relativistic and quantum electrodynamical contributions in high-Z ions. Examples of line intensity measurements are provided by measurements of the electron-impact excitation and dielectronic recombination cross sections of heliumlike transition-metal ions Ti 20+ through CO 25+ . A discussion of radiative lifetime measurements of metastable levels in heliumlike ions is given to illustrate the time-resolved spectroscopy techniques in the microsecond range. The authors also present a measurement of the spectral lineshape that illustrates the very low ion temperatures that can be achieved in an EBIT

Efforts of the occupant to change physical quality of residential unit through the change of building material at low cost flats in Jakarta

Science.gov (United States)

Nurdiani, N.

2018-03-01

Low cost flats in Jakarta – Indonesia is provided by the government for low-income people in urban areas, in line with the program to redevelop or renew slum areas. Low cost flat is built with the minimum standard of building materials. The purpose of this study is to know efforts of the occupants to change of building materials at residential unit of low cost flats. The research was conducted by descriptive method at four of low cost housing in Jakarta: Rusuna Bendungan Hilir 1, Rusuna Tambora IIIA, Rusuna Bidara Cina, and Rusuna Sukapura. The results showed that physical changes which happened in low cost flats are aesthetic (residence paint color change), or improvement of physical quality of residential unit (change of building material), become dominant aspects done by residents in four rusuna.

Buildings Interoperability Landscape

Energy Technology Data Exchange (ETDEWEB)

Hardin, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephan, Eric G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Weimin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Corbin, Charles D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-12-31

Through its Building Technologies Office (BTO), the United States Department of Energy’s Office of Energy Efficiency and Renewable Energy (DOE-EERE) is sponsoring an effort to advance interoperability for the integration of intelligent buildings equipment and automation systems, understanding the importance of integration frameworks and product ecosystems to this cause. This is important to BTO’s mission to enhance energy efficiency and save energy for economic and environmental purposes. For connected buildings ecosystems of products and services from various manufacturers to flourish, the ICT aspects of the equipment need to integrate and operate simply and reliably. Within the concepts of interoperability lie the specification, development, and certification of equipment with standards-based interfaces that connect and work. Beyond this, a healthy community of stakeholders that contribute to and use interoperability work products must be developed. On May 1, 2014, the DOE convened a technical meeting to take stock of the current state of interoperability of connected equipment and systems in buildings. Several insights from that meeting helped facilitate a draft description of the landscape of interoperability for connected buildings, which focuses mainly on small and medium commercial buildings. This document revises the February 2015 landscape document to address reviewer comments, incorporate important insights from the Buildings Interoperability Vision technical meeting, and capture thoughts from that meeting about the topics to be addressed in a buildings interoperability vision. In particular, greater attention is paid to the state of information modeling in buildings and the great potential for near-term benefits in this area from progress and community alignment.

The Role of Reconciling Values in Efforts to Build Community Resilience to Global Environmental Change

Science.gov (United States)

Rainie, S. C.; Ferguson, D. B.; Martinez, A.

2017-12-01

Global environmental change has increasingly forced researchers and policy makers to reckon with the practical and philosophical need to integrate Indigenous knowledge with western science to support sustainable, resilient communities. Despite the recognition that integration of different ways of knowing offers a compelling approach for building long-term resilience, balancing the power dynamic that favors mainstream epistemologies over other ways of knowing remains elusive. Indigenous scholars themselves often speak of "walking in two worlds," acknowledging the distinction between Indigenous knowledge and western science and the difficulty of weaving together the two approaches. Central to the distinction between different ways of knowing are the core values that drive development and application of new knowledge. The DIKW pyramid describes the hierarchical relationships between wisdom, knowledge, information, and data. In these relationships, values drive how one turns data into information, then knowledge and wisdom. Thus, if building community resilience relies on integrating Indigenous science and Western science, a central point of focus must be on establishing which of the core values from these different knowledge systems can contribute and which may impede the goal of supporting community resilience. For example, does the absence of Western science data collection protocols (a core value of empirical science) eliminate the utility of community observations of environmental change from efforts to understand system change? Indigenous data sovereignty, an emerging framework, asserts Indigenous rights to information and promotes the role of community knowledge in creating metrics, outcomes, and ultimately actions toward resilient communities. Indigenous data sovereignty acknowledges that context and values shape data in addition to providing a lens for interpreting data. Can principles for the governance of Indigenous data, such as recognizing and supporting

Bridging the gap between building science and design studios

Energy Technology Data Exchange (ETDEWEB)

Papamichael, Konstantinos; Pal, Vineeta

2002-02-06

Design studios and building science courses have been conducted independent of each other, mainly due to a lack of tools that allow quick and easy consideration of building science criteria, such as comfort and energy requirements, during the design process. Existing tools are not user-friendly and their use requires significant effort in gaining familiarity with the input requirements, understanding the modeling assumptions and interpreting the output. This paper is about the Building Design Advisor (BDA), an evolving computer-based tool intended to bridge the gap between design studios and building science considerations by addressing the above-mentioned limitations of existing tools. BDA allows automatic preparation of input files to multiple simulation tools while the user is working in a CAD environment. BDA automatically activates the relevant simulation tools when the user selects performance parameters to be computed and provides the results in a graphical form, allowing comparison of multiple design options with respect to multiple performance criteria. The paper includes considerations for the use of the BDA in the design studio and ends with a description of the current development efforts and future plans.

Enteric disease surveillance under the AFHSC-GEIS: Current efforts, landscape analysis and vision forward

Directory of Open Access Journals (Sweden)

Kasper Matthew R

2011-03-01

Full Text Available Abstract The mission of the Armed Forces Health Surveillance Center, Division of Global Emerging Infections Surveillance and Response System (AFHSC-GEIS is to support global public health and to counter infectious disease threats to the United States Armed Forces, including newly identified agents or those increasing in incidence. Enteric diseases are a growing threat to U.S. forces, which must be ready to deploy to austere environments where the risk of exposure to enteropathogens may be significant and where routine prevention efforts may be impractical. In this report, the authors review the recent activities of AFHSC-GEIS partner laboratories in regards to enteric disease surveillance, prevention and response. Each partner identified recent accomplishments, including support for regional networks. AFHSC/GEIS partners also completed a Strengths, Weaknesses, Opportunities and Threats (SWOT survey as part of a landscape analysis of global enteric surveillance efforts. The current strengths of this network include excellent laboratory infrastructure, equipment and personnel that provide the opportunity for high-quality epidemiological studies and test platforms for point-of-care diagnostics. Weaknesses include inconsistent guidance and a splintered reporting system that hampers the comparison of data across regions or longitudinally. The newly chartered Enterics Surveillance Steering Committee (ESSC is intended to provide clear mission guidance, a structured project review process, and central data management and analysis in support of rationally directed enteric disease surveillance efforts.

Effort levels of the partners in networked manufacturing

Science.gov (United States)

Chai, G. R.; Cai, Z.; Su, Y. N.; Zong, S. L.; Zhai, G. Y.; Jia, J. H.

2017-08-01

Compared with traditional manufacturing mode, could networked manufacturing improve effort levels of the partners? What factors will affect effort level of the partners? How to encourage the partners to improve their effort levels? To answer these questions, we introduce network effect coefficient to build effort level model of the partners in networked manufacturing. The results show that (1) with the increase of the network effect in networked manufacturing, the actual effort level can go beyond the ideal level of traditional manufacturing. (2) Profit allocation based on marginal contribution rate would help improve effort levels of the partners in networked manufacturing. (3) The partners in networked manufacturing who wishes to have a larger distribution ratio must make a higher effort level, and enterprises with insufficient effort should be terminated in networked manufacturing.

Current research efforts of EP study in Korea

International Nuclear Information System (INIS)

Ryu, C.M.

2013-01-01

After the successful demonstration of H mode on KSTAR, the problem of fast-ion driven MHD modes such as Alfven eigenmodes (AEs) and the reverse effects on fast ions of MHD modes is under study in KSTAR. In this paper, I will briefly describe some recent efforts of KSTAR on energetic particle physics study. (J.P.N.)

Policy Pathways: Modernising Building Energy Codes

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-01

Buildings are the largest consumers of energy worldwide and will continue to be a source of increasing energy demand in the future. Globally, the sector’s final energy consumption doubled between 1971 and 2010 to reach 2 794 million tonnes of oil equivalent (Mtoe), driven primarily by population increase and economic growth. Under current policies, the global energy demand of buildings is projected by the IEA experts to grow by an additional 838 Mtoe by 2035 compared to 2010. The challenges of the projected increase of energy consumption due to the built environment vary by country. In IEA member countries, much of the future buildings stock is already in place, and so the main challenge is to renovate existing buildings stock. In non-IEA countries, more than half of the buildings stock needed by 2050 has yet to be built. The IEA and the UNDP partnered to analyse current practices in the design and implementation of building energy codes. The aim is to consolidate existing efforts and to encourage more attention to the role of the built environment in a low-carbon and climate-resilient world. This joint IEA-UNDP Policy Pathway aims to share lessons learned between IEA member countries and non-IEA countries. The objective is to spread best practices, limit pressures on global energy supply, improve energy security, and contribute to environmental sustainability. Part of the IEA Policy Pathway series, Modernising building energy codes to secure our global energy future sets out key steps in planning, implementation, monitoring and evaluation. The Policy Pathway series aims to help policy makers implement the IEA 25 Energy Efficiency Policy Recommendations endorsed by IEA Ministers (2011).

Creating an Integrated Community-Wide Effort to Enhance Diversity in the Geosciences

Science.gov (United States)

Manduca, C. A.; Weingroff, M.

2001-05-01

Supporting the development and sustenance of a diverse geoscience workforce and improving Earth system education for the full diversity of students are important goals for our community. There are numerous established programs and many new efforts beginning. However, these efforts can become more powerful if dissemination of opportunities, effective practices, and web-based resources enable synergies to develop throughout our community. The Digital Library for Earth System Education (DLESE; www.dlese.org) has developed a working group and a website to support these goals. The DLESE Diversity Working Group provides an open, virtual community for those interested in enhancing diversity in the geosciences. The working group has focused its initial effort on 1) creating a geoscience community engaged in supporting increased diversity that builds on and is integrated with work taking place in other venues; 2) developing a web resource designed to engage and support members of underrepresented groups in learning about the Earth; and 3) assisting in enhancing DLESE collections and services to better support learning experiences of students from underrepresented groups. You are invited to join the working group and participate in these efforts. The DLESE diversity website provides a mechanism for sharing information and resources. Serving as a community database, the website provides a structure in which community members can post announcements of opportunities, information on programs, and links to resources and services. Information currently available on the site includes links to professional society activities; mentoring opportunities; grant, fellowship, employment, and internship opportunities for students and educators; information on teaching students from underrepresented groups; and professional development opportunities of high interest to members of underrepresented groups. These tools provide a starting point for developing a community wide effort to enhance

Four Essential Practices for Building Trust

Science.gov (United States)

Combs, Julie Peterson; Harris, Sandra; Edmonson, Stacey

2015-01-01

The presence of trust can enhance an organization's efforts to fulfill its mission, and the lack of trust can constrict those efforts. The authors offer four essential guidelines to help school leaders communicate in a way that builds trust. Build trust by understanding trust. Trusted leaders demonstrate care, character, and competence in their…

Building and using binoscopes

CERN Document Server

Butler, Norman

2015-01-01

Focusing on both homemade and commercial products, this book provides the reader with simple and straightforward information about the modelling and building of binoscopes. Binoscopes can be thought of as binoculars enlarged to the size of telescopes: essentially, a combination of the two. Constructing a binoscope is easier than most people think, but it still demands attention to detail and proper background knowledge. The author goes on to provide additional information about how to understand the products currently on the market, should the reader choose to purchase a binoscope instead of building one. Lastly, the book also compares binoscopes with telescopes in great detail, outlining the differences the reader can expect to see in the night sky from using both. The celestial views obtained with a binoscope, compared to a single telescope of the same aperture, are a very different experience and well worth the effort.

Applying the design-build-test paradigm in microbiome engineering.

Science.gov (United States)

Pham, Hoang Long; Ho, Chun Loong; Wong, Adison; Lee, Yung Seng; Chang, Matthew Wook

2017-12-01

The recently discovered roles of human microbiome in health and diseases have inspired research efforts across many disciplines to engineer microbiome for health benefits. In this review, we highlight recent progress in human microbiome research and how modifications to the microbiome could result in implications to human health. Furthermore, we discuss the application of a 'design-build-test' framework to expedite microbiome engineering efforts by reviewing current literature on three key aspects: design principles to engineer the human microbiome, methods to engineer microbiome with desired functions, and analytical techniques to examine complex microbiome samples. Copyright © 2017 Elsevier Ltd. All rights reserved.

Green commercial building insurance in Malaysia

Science.gov (United States)

Yang, Yu Xin Ou; Chew, Boon Cheong; Loo, Heoy Shin; Tan, Lay Hong

2017-03-01

Green building construction is growing tremendously globally even in Malaysia. Currently, there are approximate 636 buildings have registered and to be certified with Green Building Index. Among these buildings, 45 buildings have already fulfilled the requirements and fully certified. The other buildings still under provisional certification stage. Malaysia had adopted Green Building Index in 2009 to support a move to promote green building concept. Malaysia starts to move towards green building because Malaysian construction and building industry realizes that both energy consumed and waste produced are reduced without irreversible impacts to ecosystems. Consequently, insurance companies such as Fireman's Fund from America has started the green building insurance policies for their green building in the year of 2006, while Malaysia still remain the coverage for green buildings using conventional property insurance. There are lacks of efforts to be seen from insurance companies to propose green building insurance for these green buildings. There are a few factors which can take into consideration for insurance companies to start the very first green building insurance in Malaysia. Although there are challenges, some efficient strategies have been identified to overcome the problems. The methods used in this research topic is qualitative research. The results obtained shows that green commercial building insurance has a huge business opportunity in Malaysia because the number of green commercial buildings are increasing tremendously in Malaysia. It is a favor to implement green building insurance in Malaysia. Furthermore, insurance companies can consider to add in extra coverage in standard building policy to provide extra protection for non-certified green buildings which have the intention to rebuilt in green when damage happens. Generally, it is very important to introduce green commercial buildings insurance into Malaysia so that all of the green commercial

Courthouse Prototype Building

Energy Technology Data Exchange (ETDEWEB)

Malhotra, Mini [ORNL; New, Joshua Ryan [ORNL; Im, Piljae [ORNL

2018-02-01

As part of DOE's support of ANSI/ASHRAE/IES Standard 90.1 and IECC, researchers at Pacific Northwest National Laboratory (PNNL) apply a suite of prototype buildings covering 80% of the commercial building floor area in the U.S. for new construction. Efforts have started on expanding the prototype building suite to cover 90% of the commercial building floor area in the U.S., by developing prototype models for additional building types including place of worship, public order and safety, public assembly. Courthouse is courthouse is a sub-category under the “Public Order and Safety" building type category; other sub-categories include police station, fire station, and jail, reformatory or penitentiary.ORNL used building design guides, databases, and documented courthouse projects, supplemented by personal communication with courthouse facility planning and design experts, to systematically conduct research on the courthouse building and system characteristics. This report documents the research conducted for the courthouse building type and proposes building and system characteristics for developing a prototype building energy model to be included in the Commercial Building Prototype Model suite. According to the 2012 CBECS, courthouses occupy a total of 436 million sqft of floor space or 0.5% of the total floor space in all commercial buildings in the US, next to fast food (0.35%), grocery store or food market (0.88%), and restaurant or cafeteria (1.2%) building types currently included in the Commercial Prototype Building Model suite. Considering aggregated average, courthouse falls among the larger with a mean floor area of 69,400 sqft smaller fuel consumption intensity building types and an average of 94.7 kBtu/sqft compared to 77.8 kBtu/sqft for office and 80 kBtu/sqft for all commercial buildings.Courthouses range in size from 1000 sqft to over a million square foot building gross square feet and 1 courtroom to over 100 courtrooms. Small courthouses

Near-Source Modeling Updates: Building Downwash & Near-Road

Science.gov (United States)

The presentation describes recent research efforts in near-source model development focusing on building downwash and near-road barriers. The building downwash section summarizes a recent wind tunnel study, ongoing computational fluid dynamics simulations and efforts to improve ...

Building performance simulation for sustainable buildings

NARCIS (Netherlands)

Hensen, J.L.M.

2010-01-01

This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

Current Efforts in European Projects to Facilitate the Sharing of Scientific Observation Data

Science.gov (United States)

Bredel, Henning; Rieke, Matthes; Maso, Joan; Jirka, Simon; Stasch, Christoph

2017-04-01

This presentation is intended to provide an overview of currently ongoing efforts in European projects to facilitate and promote the interoperable sharing of scientific observation data. This will be illustrated through two examples: a prototypical portal developed in the ConnectinGEO project for matching available (in-situ) data sources to the needs of users and a joint activity of several research projects to harmonise the usage of the OGC Sensor Web Enablement standards for providing access to marine observation data. ENEON is an activity initiated by the European ConnectinGEO project to coordinate in-situ Earth observation networks with the aim to harmonise the access to observations, improve discoverability, and identify/close gaps in European earth observation data resources. In this context, ENEON commons has been developed as a supporting Web portal for facilitating discovery, access, re-use and creation of knowledge about observations, networks, and related activities (e.g. projects). The portal is based on developments resulting from the European WaterInnEU project and has been extended to cover the requirements for handling knowledge about in-situ earth observation networks. A first prototype of the portal was completed in January 2017 which offers functionality for interactive discussion, information exchange and querying information about data delivered by different observation networks. Within this presentation, we will introduce the presented prototype and initiate a discussion about potential future work directions. The second example concerns the harmonisation of data exchange in the marine domain. There are many organisation who operate ocean observatories or data archives. In recent years, the application of the OGC Sensor Web Enablement (SWE) technology has become more and more popular to increase the interoperability between marine observation networks. However, as the SWE standards were intentionally designed in a domain independent manner

JAEA's efforts for regional transparency in the area of nuclear nonproliferation

International Nuclear Information System (INIS)

Hoffheins, Barbara; Kawakubo, Yoko; Inoue, Naoko

2014-03-01

The Japan Atomic Energy Agency (JAEA) has undertaken a joint R and D project with the US Department of Energy's National Nuclear Security Administration (DOE/NNSA) for the purposes of developing an Information Sharing Framework (ISF) for regional nonproliferation cooperation since July 2011. This project builds on nearly twenty years of technical cooperation between JAEA, its predecessor organizations and the DOE including the activities to define, develop and test transparency technologies and other multilateral efforts. The objective of current project is to design a viable information sharing process to support the goals of building confidence in the peaceful nature of regional nuclear programs. At the end of a two-year-effort, project partners, JAEA and Sandia National Laboratories (SNL), have defined the comprehensive requirements for an ISF that will ensure nonproliferation transparency success and sustainability. In October 2011, a parallel project with the similar title and objective was launched under the arrangement between the US DOE/NNSA and the Republic of Korea Ministry of Education, Science and Technology (MEST). Since then, JAEA, SNL, the Korea Institute for Nuclear Nonproliferation and Control (KINAC) and Korea Atomic Energy Institute (KAERI) have jointly carried out the project in a form of informal, multilateral cooperation. The project partners have identified needs and audience for ISF, and initiated the discussion to develop requirements for ISF through workshops, meetings, regular telephone conferences, etc. The activities include conducting a survey to identify stakeholders' needs and requirements for an ISF, launching a website to practice information sharing concepts, and presenting papers. This paper provides the historical context of the current project to establish ISF, and reports the progress to date and speculates on future directions. (author)

Commercial Building Partnerships Replication and Diffusion

Energy Technology Data Exchange (ETDEWEB)

Antonopoulos, Chrissi A.; Dillon, Heather E.; Baechler, Michael C.

2013-09-16

This study presents findings from survey and interview data investigating replication efforts of Commercial Building Partnership (CBP) partners that worked directly with the Pacific Northwest National Laboratory (PNNL). PNNL partnered directly with 12 organizations on new and retrofit construction projects, which represented approximately 28 percent of the entire U.S. Department of Energy (DOE) CBP program. Through a feedback survey mechanism, along with personal interviews, PNNL gathered quantitative and qualitative data relating to replication efforts by each organization. These data were analyzed to provide insight into two primary research areas: 1) CBP partners’ replication efforts of technologies and approaches used in the CBP project to the rest of the organization’s building portfolio (including replication verification), and, 2) the market potential for technology diffusion into the total U.S. commercial building stock, as a direct result of the CBP program. The first area of this research focused specifically on replication efforts underway or planned by each CBP program participant. Factors that impact replication include motivation, organizational structure and objectives firms have for implementation of energy efficient technologies. Comparing these factors between different CBP partners revealed patterns in motivation for constructing energy efficient buildings, along with better insight into market trends for green building practices. The second area of this research develops a diffusion of innovations model to analyze potential broad market impacts of the CBP program on the commercial building industry in the United States.

Building online genomics applications using BioPyramid.

Science.gov (United States)

Stephenson, Liam; Wakeham, Yoshua; Seidenman, Nick; Choi, Jarny

2018-03-29

BioPyramid is a python package, which serves as a scaffold for building an online application for the exploration of gene expression data. It is designed for bioinformaticians wishing to quickly share transformed data and interactive analyses with collaborators. Current R-based tools similarly address the need to quickly share "omics"-data in an exploratory format, but these are generally small-scale, single-dataset solutions. Biopyramid is written in python pyramid framework and scalable to address longer-term or more complex projects. It contains a number of components designed to reduce the time and effort in building such an application from scratch, including gene annotation, dataset models and visualisation tools. Freely available at http://github.com/jarny/biopyramid. Implemented in python and javascript. jarnyc@unimelb.edu.au.

Joint China-United States Report for Year 1 Insulation Materials and Systems Project Area Clean Energy Research Center Building Energy Efficiency (CERC-BEE)

Energy Technology Data Exchange (ETDEWEB)

Stovall, Therese K [ORNL; Biswas, Kaushik [ORNL; Song, Bo [China Academy of Building Research; Zhang, Sisi [China Academy of Building Research

2012-08-01

In November of 2009, the presidents of China and the U.S. announced the establishment of the Clean Energy Research Center (CERC). This broad research effort is co-funded by both countries and involves a large number of research centers and universities in both countries. One part of this program is focused on improving the energy efficiency of buildings. One portion of the CERC-BEE was focused on building insulation systems. The research objective of this effort was to Identify and investigate candidate high performance fire resistant building insulation technologies that meet the goal of building code compliance for exterior wall applications in green buildings in multiple climate zones. A Joint Work Plan was established between researchers at the China Academy of Building Research and Oak Ridge National Laboratory. Efforts in the first year under this plan focused on information gathering. The objective of this research program is to reduce building energy use in China via improved building insulation technology. In cold regions in China, residents often use inefficient heating systems to provide a minimal comfort level within inefficient buildings. In warmer regions, air conditioning has not been commonly used. As living standards rise, energy consumption in these regions will increase dramatically unless significant improvements are made in building energy performance. Previous efforts that defined the current state of the built environment in China and in the U.S. will be used in this research. In countries around the world, building improvements have typically followed the implementation of more stringent building codes. There have been several changes in building codes in both the U.S. and China within the last few years. New U.S. building codes have increased the amount of wall insulation required in new buildings. New government statements from multiple agencies in China have recently changed the requirements for buildings in terms of energy efficiency and

Building Protection Against External Ionizing Fallout Radiation

Energy Technology Data Exchange (ETDEWEB)

Dillon, Michael B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Homann, Steven G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-12-01

A nuclear explosion has the potential to injure or kill tens to hundreds of thousands of people through exposure to fallout (external gamma) radiation. Existing buildings can protect their occupants (reducing external radiation exposures) by placing material and distance between fallout particles and indoor individuals. This protection is not well captured in current fallout risk assessment models and so the US Department of Defense is implementing the Regional Shelter Analysis methodology to improve the ability of the Hazard Prediction and Assessment Capability (HPAC) model to account for building protection. This report supports the HPAC improvement effort by identifying a set of building attributes (next page) that, when collectively specified, are sufficient to calculate reasonably accurate, i.e., within a factor of 2, fallout shelter quality estimates for many individual buildings. The set of building attributes were determined by first identifying the key physics controlling building protection from fallout radiation and then assessing which building attributes are relevant to the identified physics. This approach was evaluated by developing a screening model (PFscreen) based on the identified physics and comparing the screening model results against the set of existing independent experimental, theoretical, and modeled building protection estimates. In the interests of transparency, we have developed a benchmark dataset containing (a) most of the relevant primary experimental data published by prior generations of fallout protection scientists as well as (b) the screening model results.

A Case Study of the Global Group for Sharing Knowledge and Efforts in Human Resources within the Nuclear Industry

International Nuclear Information System (INIS)

Thomas, C.

2016-01-01

Full text: One of the main conclusions from the IAEA’s HRD Conference in 2014 was that people and organisations in the global nuclear industry could cooperate more in sharing information and efforts. This was an inspiring conclusion, and there seemed an especially great opportunity for such sharing of information and efforts related to the attraction, recruitment, development and retention of people within the nuclear workforce. Founding members include people from the IAEA, WNA, WANO, EDF and OPG amongst others, the global working group for Human Resource matters aimed at “Building and Sustaining a Competent Nuclear Workforce” was established. This global working group is free to join and is open to anyone concerned with Building and Sustaining a Competent NuclearWorkforce. The objectives of the group are to share useful information, find others with similar objectives to cooperate with, ask questions, share opinions and crucially to avoid unnecessary duplication of efforts. The group already has 160 members from more than 15 countries and is currently hosted as a group on the LinkedIn website. The vision for the group is that it will become an invaluable resource for people across the world in the nuclear industry for sharing information and efforts. (author

ASME Code Efforts Supporting HTGRs

Energy Technology Data Exchange (ETDEWEB)

D.K. Morton

2012-09-01

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

ASME Code Efforts Supporting HTGRs

Energy Technology Data Exchange (ETDEWEB)

D.K. Morton

2011-09-01

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

Empirical Validation of Building Simulation Software

DEFF Research Database (Denmark)

Kalyanova, Olena; Heiselberg, Per

The work described in this report is the result of a collaborative effort of members of the International Energy Agency (IEA), Task 34/43: Testing and validation of building energy simulation tools experts group.......The work described in this report is the result of a collaborative effort of members of the International Energy Agency (IEA), Task 34/43: Testing and validation of building energy simulation tools experts group....

DRIVER: Building a Sustainable Infrastructure of European Scientific Repositories

CERN Multimedia

CERN. Geneva

2007-01-01

The acronym DRIVER stands for “Digital Repository Infrastructure Vision for European Research”. Ten partners from eight countries have entered into an international partnership, to connect and network as a first step more than 50 physically distributed institutional repositories to one, large-scale, virtual Knowledge Base of European research. Universities and research organisations around the world currently build repositories, whose overall number is estimated to exceed 600 by far. As the academic information landscape is already highly fragmented, DRIVER is the trans-national catalyst to overcome local, isolated efforts and to stop fragmentation by offering one harmonised, virtual knowledge resource. DRIVER currently builds a production quality test-bed to assist the development of a knowledge infrastructure across Europe. DRIVER as a project, funded by the “Research Infrastructure” unit of the European Commission, is also preparing for the future expansion and upgrade of the Digital Repository in...

DRIVER Building a Sustainable Infrastructure of European Scientific Repositories

CERN Document Server

CERN. Geneva; Hagemann, Melissa

2007-01-01

The acronym DRIVER stands for “Digital Repository Infrastructure Vision for European Research”. Ten partners from eight countries have entered into an international partnership, to connect and network as a first step more than 50 physically distributed institutional repositories to one, large-scale, virtual Knowledge Base of European research. Universities and research organisations around the world currently build repositories, whose overall number is estimated to exceed 600 by far. As the academic information landscape is already highly fragmented, DRIVER is the trans-national catalyst to overcome local, isolated efforts and to stop fragmentation by offering one harmonised, virtual knowledge resource. DRIVER currently builds a production quality test-bed to assist the development of a knowledge infrastructure across Europe. DRIVER as a project, funded by the “Research Infrastructure” unit of the European Commission, is also preparing for the future expansion and upgrade of the Digital Repository inf...

Primary energy use for heating in the Swedish building sector-Current trends and proposed target

International Nuclear Information System (INIS)

Johansson, P.; Nylander, A.; Johnsson, F.

2007-01-01

One goal of the Swedish energy policy is to reduce the amount of electricity used for heating in the building sector. This means to reduce the primary energy used for heating which in this paper is analyzed in the context of various heating technologies and CO 2 emissions. The analysis is applied to a region in Sweden (southern Sweden) for which detailed information on the energy infrastructure (the capital stock of the buildings and heating systems together with geographical variations in heat intensity) is available from a previous work [Johansson, P., Nylander, A., Johnsson, F., 2005. Electricity dependency and CO 2 emissions from heating in the Swedish building sector-current trends in conflict with governmental policy? Energy policy] and which is large enough to be assumed representative for Sweden as a whole. The detailed mapping of the energy infrastructure allows a good estimate on the rate at which the energy system can be expected to be replaced with respect to economical lifetime of the capital stock (the year 2025 in this case). Two scenarios are investigated; a target scenario for which energy savings are employed (e.g. improving climate shell in buildings) and oil and most of the electricity used for heating purposes are phased out and a second for which the current trend in the heating market continues. In the target scenario it is shown that although only applying commercially competitive heating technologies, it is possible to achieve a 47% reduction in primary energy use for heating with a 34% decrease in heat demand together with significant reduction in CO 2 emissions. However, the scenario which continues the current trends on the heating market instead yields an increase (of about 10%) in primary energy use (reduction in conversion efficiency) of the heating system of the region over the period studied, in spite of a slight decrease in heat demand (9%, mainly due to energy efficiency measures) as well as in CO 2 emissions. In light of the

Energy Efficiency Potential in Existing Commercial Buildings: Review of Selected Recent Studies

Energy Technology Data Exchange (ETDEWEB)

Belzer, David B.

2009-04-03

This report reviews six recent studies (from 2002 through 2006) by states and utilities to assess the energy saving potential in existing commercial buildings. The studies cover all or portions of California, Connecticut, Vermont, Colorado, Illinois, and the Pacific Northwest. The studies clearly reveal that lighting remains the single largest and most cost effective end use that can be reduced to save energy. Overall the study indicated that with existing technologies and costs, a reasonable range of economic savings potential in existing commercial buildings is between 10 and 20 percent of current energy use. While not a focus of the study, an additional conclusion is that implementation of commercial building monitoring and controls would also play an important role in the nation’s efforts to improve energy efficiency of existing buildings.

Issues of Application of Machine Learning Models for Virtual and Real-Life Buildings

Directory of Open Access Journals (Sweden)

Young Min Kim

2016-06-01

Full Text Available The current Building Energy Performance Simulation (BEPS tools are based on first principles. For the correct use of BEPS tools, simulationists should have an in-depth understanding of building physics, numerical methods, control logics of building systems, etc. However, it takes significant time and effort to develop a first principles-based simulation model for existing buildings—mainly due to the laborious process of data gathering, uncertain inputs, model calibration, etc. Rather than resorting to an expert’s effort, a data-driven approach (so-called “inverse” approach has received growing attention for the simulation of existing buildings. This paper reports a cross-comparison of three popular machine learning models (Artificial Neural Network (ANN, Support Vector Machine (SVM, and Gaussian Process (GP for predicting a chiller’s energy consumption in a virtual and a real-life building. The predictions based on the three models are sufficiently accurate compared to the virtual and real measurements. This paper addresses the following issues for the successful development of machine learning models: reproducibility, selection of inputs, training period, outlying data obtained from the building energy management system (BEMS, and validation of the models. From the result of this comparative study, it was found that SVM has a disadvantage in computation time compared to ANN and GP. GP is the most sensitive to a training period among the three models.

Review of Building Data Frameworks across Countries: Lessons for India

Energy Technology Data Exchange (ETDEWEB)

Iyer, Maithili [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stratton, Hannah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mathew, Sangeeta [Alliance for an Energy Efficient Economy, New Delhi (India); Kumar, Satish [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mathew, Paul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singh, Mohini [Synurja, LLC, New Delhi (India)

2017-07-31

The report outlines the initial explorations carried out by LBNL on available examples of energy data collection frameworks for buildings. Specifically, this monograph deals with European experience in the buildings sector, the US experience in the commercial buildings sector, and examples of data collection effort in Singapore and China to capture the Asian experience in the commercial sector. The review also provides a summary of the past efforts in India to collect and use commercial building energy data and its strengths and weaknesses. The overall aim of this activity is to help understand the use cases that drive the granularity of data being collected and the range of methodologies adopted for the data collection effort. This review is a key input and reference for developing a data collection framework for India, and also clarifies general thinking on the institutional structure that may be amenable for data collection effort to match the needs and requirements of commercial building sector in India.

Analysis of Potential Benefits and Costs of Updating the Commercial Building Energy Code in Iowa

Energy Technology Data Exchange (ETDEWEB)

Cort, Katherine A.; Belzer, David B.; Richman, Eric E.; Winiarski, David W.

2002-09-07

The state of Iowa is considering adpoting ASHRAE 90.1-1999 as its commercial building energy code. In an effort to evaluate whether or not this is an appropraite code for the state, the potential benefits and costs of adopting this standard are considered. Both qualitative and quantitative benefits are assessed. The energy simulation and economic results suggest that adopting ASHRAE 90.1-1999 would provide postitive net benefits to the state relative to the building and design requirements currently in place.

Non-proliferation efforts in South Asia

International Nuclear Information System (INIS)

Chellaney, B.

1994-01-01

Southern Asia is one of the most volatile regions in the world because of inter-State and intra-State conflicts. Security in the region highly depends on the rival capabilities of the involved states, Pakistan, India, China. Increased Confidence building and nuclear transparency are becoming more significant issues in attaining stability in the region, although non-proliferation efforts in this region have attained little headway

Zero Energy Building definition–a literature review

DEFF Research Database (Denmark)

Heiselberg, Per Kvols; Marszal, Anna Joanna

2011-01-01

The worldwide CO2 emission mitigation efforts, the growing energy resource shortage and the fact that buildings are responsible for a large share of the world’s primary energy use drives research towards new building concepts, in particular Zero Energy/Emission Buildings (ZEBs). Unfortunately, th...

ISO 50001 for US Commercial Buildings - Current Status and Opportunities

Energy Technology Data Exchange (ETDEWEB)

Liu, Jingjing; Sheaffer, Paul

2017-12-01

''ISO 50001: 2011 Energy management systems – Requirements with guidance for use'' is a voluntary International Standard which provides organizations a proven framework to manage energy and continuously improve their energy performance. Implementing ISO 50001 in the commercial building sector has its unique opportunities and challenges in comparison with the industrial sector. The energy footprint of a portfolio of commercial buildings can be just as significant as a large industrial facility in comparison. There are many energy-saving opportunities in commercial buildings that can be addressed without capital investments, and the perceived risks for making energy improvements can be lower than in the industrial sector. In addition, the energy-consuming systems in commercial buildings are limited in types and have many similarities across buildings, which makes it much easier to standardize many ISO 50001 required processes, 5 procedures and documents to simplify implementation. There are also some sector-unique challenges, such as less familiar with ISO systems and the certification process. Another challenge arises from the complexity in some buildings’ ownership, tenancy, and O&M responsibilities. This whitepaper discusses these opportunities and issues in detail. The paper also recommends the characteristics of organizations in the commercial building sector that can benefit the most from adopting the ISO 50001 standard – namely the “suitable market”. Eight segments (education, food sales, retail, inpatient health care, hospitality, office buildings, laboratories and data centers) within the commercial building sector are highlighted.

Seismic Safety Margins Research Program (Phase I). Project IV. Structural building response; Structural Building Response Review

International Nuclear Information System (INIS)

Healey, J.J.; Wu, S.T.; Murga, M.

1980-02-01

As part of the Phase I effort of the Seismic Safety Margins Research Program (SSMRP) being performed by the University of California Lawrence Livermore Laboratory for the US Nuclear Regulatory Commission, the basic objective of Subtask IV.1 (Structural Building Response Review) is to review and summarize current methods and data pertaining to seismic response calculations particularly as they relate to the objectives of the SSMRP. This material forms one component in the development of the overall computational methodology involving state of the art computations including explicit consideration of uncertainty and aimed at ultimately deriving estimates of the probability of radioactive releases due to seismic effects on nuclear power plant facilities

Current situation of the project finishing of the building of 3 and 4 block of the nuclear power plant Mochovce

International Nuclear Information System (INIS)

Niznan, S.

2005-01-01

In the contribution there is the basic information mentioned about history of building and the current situation at the finishing of the building of 3 and 4 block of the Nuclear Power Plant Mochovce with the use of project digitization. Further on the contribution shows what kinds of supporting material has been elaborated, what kind of decisions have been issued to the finishing of the building, way of financing and also the assumption of investment return under the defined conditions. An orientation time schedule of the finishing of the building and the crucial steps for its security are presented in the conclusion

Building Performance Simulation for Sustainable Energy Use in Buildings

NARCIS (Netherlands)

Hensen, J.L.M.

2010-01-01

This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

Building performance simulation for sustainable building design and operation

NARCIS (Netherlands)

Hensen, J.L.M.

2011-01-01

This paper aims to provide a general view of the background and current state of building performance simulation, which has the potential to deliver, directly or indirectly, substantial benefits to building stakeholders and to the environment. However the building simulation community faces many

Towards high-reliability organising in healthcare: a strategy for building organisational capacity.

Science.gov (United States)

Aboumatar, Hanan J; Weaver, Sallie J; Rees, Dianne; Rosen, Michael A; Sawyer, Melinda D; Pronovost, Peter J

2017-08-01

In a high-reliability organisation (HRO), safety and quality (SQ) is an organisational priority, and all workforce members are engaged, continuously learning and improving their work. To build organisational capacity for SQ work, we have developed a role-tailored capacity-building framework that we are currently employing at the Johns Hopkins Armstrong Institute for Patient Safety and Quality as part of an organisational strategy towards HRO. This framework considers organisation-wide competencies for SQ that includes all staff and faculty and is integrated into a broader organisation-wide operating management system for improving quality. In this framework, achieving safe, high-quality care is connected to healthcare workforce preparedness. Capacity-building efforts are tailored to the needs of distinct groups within the workforce that fall within three categories: (1) front-line providers and staff, (2) managers and local improvement personnel and (3) SQ leaders and experts. In this paper we describe this framework, our implementation efforts to date, challenges met and lessons learnt. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Building perservation practice

DEFF Research Database (Denmark)

Pilegaard, Marie Kirstine

, and they indicate the importance of this story to be preserved. The professionals, who cooperate on the preservation efforts for the cultural environments today, all emphasizes the communication of the story, but using different approaches towards the processes of reading, interpreting and communicating. The role...... planning? In this paper I will focus on the communication of the architects working with building preservation and planning, how they communicate the building, the interventions and the storytelling in practice. The methods used by the architects are based on a practice, where some skills are learned...... through education, such as documentation of buildings and the restoration as a way of communicating the architect's intervention on the building, meanwhile the communication of the buildings history is seen as a "natural" skill and the methods are not questioned in the practice. The storytelling has today...

Leverage of Behavioural Patterns of Window Opening and Heating Set Point Adjustments on Energy Consumption and Thermal Comfort in Residential Buildings

DEFF Research Database (Denmark)

Corgnati, Stefano Paolo; D'Oca, Simona; Fabi, Valentina

2014-01-01

The current trend in reduction in energy use in buildings is oriented towards sustainable measures and techniques aimed to energy need restraint. Even so, studies have underlined large differences in energy consumption in similar buildings, suggesting strong influence of occupant behaviour...... through a better and more accurate prediction of energy use; however, they are still unable to replicate the actual dynamics that govern energy uses within buildings. Furthermore, occupant behaviour is currently described by static profiles, based on assumptions and average values of typical behaviour......, considering different behavioural patterns and preferences among indoor environmental quality, is arising. Final goal of this research is to simulate, in a more accurate way, the variation in actual energy consumption due to human interaction within buildings. In this effort, the study has highlighted which...

Building Software, Building Community: Lessons from the Ropensci Project

Science.gov (United States)

Boettiger, C.

2014-12-01

rOpenSci is a developer collective originally formed in 2011 by graduate students and post-docs from ecology and evolutionary biology to collaborate on building software tools to facilitate a more open and synthetic approach in the face of transformative rise of large and heterogeneous data. Born on the internet (the collective only began through chance discussions over social media), we have grown into a widely recognized effort that supports an ecosystem of some 45software packages, engages scores of collaborators, has taught dozens of workshops around the world, and has secured over $480,000 in grant support. As young scientists working in an academic context largely without direct support for our efforts, we have first hand experience with most of the the technical and social challenges in developing sustainable scientific software. I will summarize our experiences, the challenges we have faced, and describe our approach and success in building an effective and diverse community around the rOpenSci project.

Industry Research and Recommendations for Small Buildings and Small Portfolios

Energy Technology Data Exchange (ETDEWEB)

Langner, Rois [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hendron, Bob [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States); Huppert, Mark [National Trust for Historic Preservation, Washington, DC (United States); Cochrane, Ric [National Trust for Historic Preservation, Washington, DC (United States)

2013-12-01

Small buildings have been left behind in the energy efficiency marketplace because financial and technical resources have flowed to larger commercial buildings. DOE's Building Technologies Office works with the commercial building industry to accelerate the uptake of energy efficiency technologies and techniques in existing and new commercial buildings (DOE 2013). BTO recognizes the SBSP sector'spotential for significant energy savings and the need for investments in resources that are tailored to this sector's unique needs. The industry research and recommendations described in this report identify potential approaches and strategic priorities that BTO could explore over the next 3-5 years that will support the implementation of high-potential energy efficiency opportunities for thisimportant sector. DOE is uniquely positioned to provide national leadership, objective information, and innovative tools, technologies, and services to support cost-effective energy savings in the fragmented and complex SBSP sector. Properly deployed, the DOE effort could enhance and complement current energy efficiency approaches. Small portfolios are loosely and qualitatively defined asportfolios of buildings that include only a small number of small buildings. This distinction is important because the report targets portfolio owners and managers who generally do not have staff and other resources to track energy use and pursue energy efficiency solutions.

Building perservation practice

DEFF Research Database (Denmark)

Pilegaard, Marie Kirstine

Cultural Heritage sites are in the current practice, defined as everything you find on a site within a delimited selected area. Written sources and guidelines for the preservation of the cultural heritage, written by the public authorities or professionals describe them as places that tell a story......, and they indicate the importance of this story to be preserved. The professionals, who cooperate on the preservation efforts for the cultural environments today, all emphasizes the communication of the story, but using different approaches towards the processes of reading, interpreting and communicating. The role...... of architects and planners is primarily to reconcile the conservation prospects with the future use of buildings and sites. They intermediary the site through selections of the narratives, and in practice the restoration or transformation projects becomes a communication of the selected story, utilized...

Analysis of Potential Benefits and Costs of Adopting a Commercial Building Energy Standard in South Dakota

Energy Technology Data Exchange (ETDEWEB)

Belzer, David B.; Cort, Katherine A.; Winiarski, David W.; Richman, Eric E.

2005-03-04

The state of South Dakota is considering adopting a commercial building energy standard. This report evaluates the potential costs and benefits to South Dakota residents from requiring compliance with the most recent edition of the ANSI/ASHRAE/IESNA 90.1-2001 Energy Standard for Buildings except Low-Rise Residential Buildings. These standards were developed in an effort to set minimum requirements for the energy efficient design and construction of new commercial buildings. The quantitative benefits and costs of adopting a commercial building energy code are modeled by comparing the characteristics of assumed current building practices with the most recent edition of the ASHRAE Standard, 90.1-2001. Both qualitative and quantitative benefits and costs are assessed in this analysis. Energy and economic impacts are estimated using results from a detailed building simulation tool (Building Loads Analysis and System Thermodynamics [BLAST] model) combined with a Life-Cycle Cost (LCC) approach to assess corresponding economic costs and benefits.

Building Integrated Photovoltaics: A Concise Description of the Current State of the Art and Possible Research Pathways

Directory of Open Access Journals (Sweden)

Bjørn Petter Jelle

2015-12-01

Full Text Available Building integrated photovoltaics (BIPV offer an aesthetical, economical and technical solution to integrate solar cells harvesting solar radiation to produce electricity within the climate envelopes of buildings. Photovoltaic (PV cells may be mounted above or onto the existing or traditional roofing or wall systems. However, BIPV systems replace the outer building envelope skin, i.e., the climate screen, hence serving simultanously as both a climate screen and a power source generating electricity. Thus, BIPV may provide savings in materials and labor, in addition to reducing the electricity costs. Hence, for the BIPV products, in addition to specific requirements put on the solar cell technology, it is of major importance to have satisfactory or strict requirements of rain tightness and durability, where building physical issues like e.g., heat and moisture transport in the building envelope also have to be considered and accounted for. This work, from both a technological and scientific point of view, summarizes briefly the current state-of-the-art of BIPV, including both BIPV foil, tiles, modules and solar cell glazing products, and addresses possible research pathways for BIPV in the years to come.

The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building

Directory of Open Access Journals (Sweden)

Nadeem Khan

2014-03-01

Full Text Available Background: Chemical exposure is a major health problem globally. Poison control centers (PCCs play a leading role both in developed and developing countries in the prevention and control of poisonous chemical exposures. In this study, we aimed to assess the current state of PCCs in Pakistan and highlight capacity building needs in these centers. Methods: A cross-sectional survey of the two registered PCCs was done during August – December 2011. Necessary services of the PCCs were evaluated and the data were recorded on a predesigned checklist. Results: Both PCCs are affiliated to a tertiary care hospital. Clinical services to poisoned patients were available 24 hours a day / 7 days a week. Information on common local products was available to poison center staff. Both centers were involved in undergraduate and post graduate teaching. Telephone poison information service was not available in either of centers. There was a limited capacity for qualitative and analytical toxicology. Common antidotes were available. There were limited surveillance activities to capture toxic risks existing in the community and also a deficiency was observed in chemical disaster planning. Conclusion: PCCs in Pakistan need capacity building for specialized training in toxicology, toxicovigilance, chemical disaster planning, analytical laboratory tests and telephone service for consultation in poisoning cases.   How to cite this article: Khan NU, Mir MU, Khan UR, Khan AR, Ara J, Raja K, et al. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building. Asia Pac J Med Toxicol 2014;3:31-5.

Overview and analysis of current BIPV products: new criteria for supporting the technological transfer in the building sector

Directory of Open Access Journals (Sweden)

Pierluigi Bonomo

2015-12-01

Full Text Available The growing demand for nearly-Zero Energy Buildings is rapidly contributing to change the building skin from being a passive barrier towards a sensitive and active interface. Building Integrated Photovoltaics (BIPV is a unique solution for delivering clean, safe, affordable and decentralized electricity to people transforming the building surfaces in active solar collectors. Despite photovoltaic (PV technology and their basic usage are today known to everybody, the particular requirements for building integration have brought to the surface some issues over the years so that BIPV is still a niche market. Starting from this observation, the paper presents the results of an investigation on the current market of BIPV products for roofs and façade. The analysis aimed to identify the relevant possibilities the products today offer and the level of information that the producers make available within the technical description of BIPV systems. After disclosing the actual lack of information in comparison to conventional building products, the authors propose to implement a new “building-based” approach that could support the BIPV market by including a more comprehensive description of the product’s quality (today mainly comprising electrical and basic physical features. Such a “building-technology” perspective, also considering the recent normative framework in BIPV field, is expected to encourage the technological transfer of PV in the building sector by facilitating the daily work of architects, installers and the whole value chain.

Prevention of Fetal Alcohol Spectrum Disorder: Current Canadian Efforts and Analysis of Gaps

Directory of Open Access Journals (Sweden)

Nancy Poole

2016-01-01

Full Text Available Effective prevention of risky alcohol use in pregnancy involves much more than providing information about the risk of potential birth defects and developmental disabilities in children. To categorize the breadth of possible initiatives, Canadian experts have identified a four-part framework for fetal alcohol spectrum disorder (FASD prevention: Level 1, public awareness and broad health promotion; Level 2, conversations about alcohol with women of childbearing age and their partners; Level 3, specialized support for pregnant women; and Level 4, postpartum support for new mothers. In order to describe the level of services across Canada, 50 Canadian service providers, civil servants, and researchers working in the area of FASD prevention were involved in an online Delphi survey process to create a snapshot of current FASD prevention efforts, identify gaps, and provide ideas on how to close these gaps to improve FASD prevention. Promising Canadian practices and key areas for future action are described. Overall, Canadian FASD prevention programming reflects evidence-based practices; however, there are many opportunities to improve scope and availability of these initiatives.

ANALYZING THE CONSUMER PROFILING FOR IMPROVING EFFORTS OF INTEGRATED MARKETING COMMUNICATION

Directory of Open Access Journals (Sweden)

Olimpia OANCEA

2014-06-01

Full Text Available In an economy with a strong concurential character, organizations must capitalize the integrated marketing communication in the most effective way, to ensure the creation and maintenance of long-term relationships with current and potential customers. Building and managing the relationships with customers can have a direct and favourable effect on the efficiency of an organization's communication efforts. The integrated marketing communication identifies with the nowadays market dynamics and learns the organizations how easy can be to prosper in an environment where changes occur in an alarming way. Therefore, the purpose of this paper is to analyze the socio-demographic profile of the consumers of bread in Arges County, as well as the preferences and purchasing behaviour at the level of the market segments identified using the K-Means Cluster Analysis method.

Sick building syndrome: in public buildings and workplaces

National Research Council Canada - National Science Library

Abdul-Wahab, Sabah A

2011-01-01

... are health and pleasant to live in. The chapters of this book have elaborated in a clear style, yet scientifically solid, the causes, diagnostic tools, health impacts and mitigation approaches that may be applied to existing and planned buildings. I would like to congratulate the authors and the editor for this excellent effort. We at SQU are proud ...

Building Procurement

DEFF Research Database (Denmark)

Andersson, Niclas

2007-01-01

evolves from a simple establishment of a contractual relationship to a central and strategic part of construction. The authors relate to cultural, ethical and social and behavioural sciences as the fundamental basis for analysis and understanding of the complexity and dynamics of the procurement system......‘The procurement of construction work is complex, and a successful outcome frequently elusive’. With this opening phrase of the book, the authors take on the challenging job of explaining the complexity of building procurement. Even though building procurement systems are, and will remain, complex...... despite this excellent book, the knowledge, expertise, well-articulated argument and collection of recent research efforts that are provided by the three authors will help to make project success less elusive. The book constitutes a thorough and comprehensive investigation of building procurement, which...

Who is Going to Build the Wall? A Building Trades Crisis in the U.S.A.

Directory of Open Access Journals (Sweden)

Ian Toppin

2018-04-01

Full Text Available The context of this study was to examine factors contributing to significant workforce shortages in building trades in the United States. As it is, recruitment of qualified skilled trades workers is becoming increasingly difficult due to lack of a pipeline of prospective workers, and training programs. The study assumed a theoretical inquiry approach in order to address the following three main questions: 1 What is the scope of the workforce shortage in skilled and building trades in the US? 2 What factors are recognized as contributors to the building trades workforce shortage in the US? And, 3 What strategies can be implemented to reverse building trades workforce shortages in the US? Findings affirmed that the scope of workforce shortages in skilled and building (con- struction trades in the US is very broad and the impact is rather deep. Factors con- tributing to the shortage include: declines in high school technical education programs, which have been replaced by career academies; misconception that higher education al- ways equal higher income, but the untold story is higher debt associated with pursuing higher education; and stricter immigration laws, which are forcing potential workers out of the US. The study concluded that in order to reverse currently declining workforce trends the following six strategies should be implemented: 1 Make it a national priority, thereby appropriating adequate resources to the effort. 2 Increase the number or women and African Americans in building trades. 3 Expand apprenticeship programs. An expan- sion of both government and corporate incentives are needed to stimulate an increase in apprenticeships. 4 Reintroduce building and skilled trades programs in secondary and postsecondary schools. Growth in the number of Career Academies, and participation in them has been encouraging, yet there are not enough of them to meet the need. 5 Re-examine guest-worker programs, which are currently cumbersome for

Experience implementing energy standards for commercial buildings and its lessons for the Philippines

Energy Technology Data Exchange (ETDEWEB)

Busch, John; Deringer, Joseph

1998-10-01

Energy efficiency standards for buildings have been adopted in over forty countries. This policy mechanism is pursued by governments as a means of increasing energy efficiency in the buildings sector, which typically accounts for about a third of most nations' energy consumption and half of their electricity consumption. This study reports on experience with implementation of energy standards for commercial buildings in a number of countries and U.S. states. It is conducted from the perspective of providing useful input to the Government of the Philippines' (GOP) current effort at implementing their building energy standard. While the impetus for this work is technical assistance to the Philippines, the intent is to shed light on the broader issues attending implementation of building energy standards that would be applicable there and elsewhere. The background on the GOP building energy standard is presented, followed by the objectives for the study, the approach used to collect and analyze information about other jurisdictions' implementation experience, results, and conclusions and recommendations.

THE ISPRS BENCHMARK ON URBAN OBJECT CLASSIFICATION AND 3D BUILDING RECONSTRUCTION

Directory of Open Access Journals (Sweden)

F. Rottensteiner

2012-07-01

Full Text Available For more than two decades, many efforts have been made to develop methods for extracting urban objects from data acquired by airborne sensors. In order to make the results of such algorithms more comparable, benchmarking data sets are of paramount importance. Such a data set, consisting of airborne image and laserscanner data, has been made available to the scientific community. Researchers were encouraged to submit results of urban object detection and 3D building reconstruction, which were evaluated based on reference data. This paper presents the outcomes of the evaluation for building detection, tree detection, and 3D building reconstruction. The results achieved by different methods are compared and analysed to identify promising strategies for automatic urban object extraction from current airborne sensor data, but also common problems of state-of-the-art methods.

BIM, GIS and semantic models of cultural heritage buildings

Directory of Open Access Journals (Sweden)

Pavel Tobiáš

2016-12-01

Full Text Available Even though there has been a great development of using building information models in the AEC (Architecture/Engineering/Construction sector recently, creation of models of existing buildings is still not very usual. The cultural heritage documentation is still, in most cases, kept in the form of 2D drawings while these drawings mostly contain only geometry without semantics, attributes or definitions of relationships and hierarchies between particular building elements. All these additional information would, however, be very providential for the tasks of cultural heritage preservation, i.e. for the facility management of heritage buildings or for reconstruction planning and it would be suitable to manage all geometric and non-geometric information in a single 3D information model. This paper is based on the existing literature and focuses on the historic building information modelling to provide information about the current state of the art. First, a summary of available software tools is introduced while not only the BIM tools but also the related GIS software is considered. This is followed by a review of existing efforts worldwide and an evaluation of the facts found.

New insights from direct monitoring of turbidity currents; and a proposal for co-ordinating international efforts at a series of global "turbidity current test sites"

Science.gov (United States)

Talling, Peter

2015-04-01

Turbidity currents, and other types of submarine sediment density flow, arguably redistribute more sediment across the surface of the Earth than any other flow process. It is now over 60 years since the seminal publication of Kuenen and Migliorini (1950) in which they made the link between sequences of graded bedding and turbidity currents. The deposits of submarine sediment density flows have been described in numerous locations worldwide, and this might lead to the view that these flows are well understood. However, it is sobering to note quite how few direct measurements we have from these submarine flows in action. Sediment concentration is the critical parameter controlling such flows, yet it has never been measured directly for flows that reach and build submarine fans. How then do we know what type of flow to model in flume tanks, or which assumptions to use to formulate numerical simulations or analytical models? It is proposed here that international efforts are needed for an initiative to monitor active turbidity currents at a series of 'test sites' where flows occur frequently. The flows evolve significantly, such that source to sink data are needed. We also need to directly monitor flows in different settings with variable triggering factors and flow path morphologies because their character can vary significantly. Such work should integrate numerical and physical modelling with the collection of field observations in order to understand the significance of field observations. Such an international initiative also needs to include coring of deposits to link flow processes to deposit character, because in most global locations flow behaviour must be inferred from deposits alone. Collection of seismic datasets is also crucial for understanding the larger-scale evolution and resulting architecture of these systems, and to link with studies of subsurface reservoirs. Test site datasets should thus include a wide range of data types, not just from direct flow

Current status of the MPEG-4 standardization effort

Science.gov (United States)

Anastassiou, Dimitris

1994-09-01

The Moving Pictures Experts Group (MPEG) of the International Standardization Organization has initiated a standardization effort, known as MPEG-4, addressing generic audiovisual coding at very low bit-rates (up to 64 kbits/s) with applications in videotelephony, mobile audiovisual communications, video database retrieval, computer games, video over Internet, remote sensing, etc. This paper gives a survey of the status of MPEG-4, including its planned schedule, and initial ideas about requirements and applications. A significant part of this paper is summarizing an incomplete draft version of a `requirements document' which presents specifications of desirable features on the video, audio, and system level of the forthcoming standard. Very low bit-rate coding algorithms are not described, because no endorsement of any particular algorithm, or class of algorithms, has yet been made by MPEG-4, and several seminars held concurrently with MPEG-4 meetings have not so far provided evidence that such high performance coding schemes are achievable.

Artificial intelligence support for scientific model-building

Science.gov (United States)

Keller, Richard M.

1992-01-01

Scientific model-building can be a time-intensive and painstaking process, often involving the development of large and complex computer programs. Despite the effort involved, scientific models cannot easily be distributed and shared with other scientists. In general, implemented scientific models are complex, idiosyncratic, and difficult for anyone but the original scientific development team to understand. We believe that artificial intelligence techniques can facilitate both the model-building and model-sharing process. In this paper, we overview our effort to build a scientific modeling software tool that aids the scientist in developing and using models. This tool includes an interactive intelligent graphical interface, a high-level domain specific modeling language, a library of physics equations and experimental datasets, and a suite of data display facilities.

Efforts Aimed To Reduce Attrition in Antimalarial Drug Discovery: A Systematic Evaluation of the Current Antimalarial Targets Portfolio.

Science.gov (United States)

Chaparro, María Jesús; Calderón, Félix; Castañeda, Pablo; Fernández-Alvaro, Elena; Gabarró, Raquel; Gamo, Francisco Javier; Gómez-Lorenzo, María G; Martín, Julio; Fernández, Esther

2018-04-13

Malaria remains a major global health problem. In 2015 alone, more than 200 million cases of malaria were reported, and more than 400,000 deaths occurred. Since 2010, emerging resistance to current front-line ACTs (artemisinin combination therapies) has been detected in endemic countries. Therefore, there is an urgency for new therapies based on novel modes of action, able to relieve symptoms as fast as the artemisinins and/or block malaria transmission. During the past few years, the antimalarial community has focused their efforts on phenotypic screening as a pragmatic approach to identify new hits. Optimization efforts on several chemical series have been successful, and clinical candidates have been identified. In addition, recent advances in genetics and proteomics have led to the target deconvolution of phenotypic clinical candidates. New mechanisms of action will also be critical to overcome resistance and reduce attrition. Therefore, a complementary strategy focused on identifying well-validated targets to start hit identification programs is essential to reinforce the clinical pipeline. Leveraging published data, we have assessed the status quo of the current antimalarial target portfolio with a focus on the blood stage clinical disease. From an extensive list of reported Plasmodium targets, we have defined triage criteria. These criteria consider genetic, pharmacological, and chemical validation, as well as tractability/doability, and safety implications. These criteria have provided a quantitative score that has led us to prioritize those targets with the highest probability to deliver successful and differentiated new drugs.

Building Mashups for the Enterprise with SABRE

NARCIS (Netherlands)

Z. Maraikar (Ziyan); A. Lazovik (Aliaksandr); F. Arbab (Farhad)

2008-01-01

textabstractThe explosive popularity of mashups has given rise to a plethora of web-based tools for rapidly building mashups with minimal programming effort. In turn, this has spurred interest in using these tools to empower end-users to build \\emph{situational applications} for business.

Rainwater runoff from building facades : a review

NARCIS (Netherlands)

Blocken, B.J.E.; Derome, D.; Carmeliet, J.E.

2013-01-01

Rainwater runoff from building facades is a complex process governed by a wide range of urban, building, material and meteorological parameters. Given this complexity and the wide range of influencing parameters, it is not surprising that despite research efforts spanning over almost a century,

Glass Property Models and Constraints for Estimating the Glass to be Produced at Hanford by Implementing Current Advanced Glass Formulation Efforts

Energy Technology Data Exchange (ETDEWEB)

Vienna, John D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kim, Dong-Sang [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Skorski, Daniel C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Matyas, Josef [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2013-07-01

Recent glass formulation and melter testing data have suggested that significant increases in waste loading in HLW and LAW glasses are possible over current system planning estimates. The data (although limited in some cases) were evaluated to determine a set of constraints and models that could be used to estimate the maximum loading of specific waste compositions in glass. It is recommended that these models and constraints be used to estimate the likely HLW and LAW glass volumes that would result if the current glass formulation studies are successfully completed. It is recognized that some of the models are preliminary in nature and will change in the coming years. Plus the models do not currently address the prediction uncertainties that would be needed before they could be used in plant operations. The models and constraints are only meant to give an indication of rough glass volumes and are not intended to be used in plant operation or waste form qualification activities. A current research program is in place to develop the data, models, and uncertainty descriptions for that purpose. A fundamental tenet underlying the research reported in this document is to try to be less conservative than previous studies when developing constraints for estimating the glass to be produced by implementing current advanced glass formulation efforts. The less conservative approach documented herein should allow for the estimate of glass masses that may be realized if the current efforts in advanced glass formulations are completed over the coming years and are as successful as early indications suggest they may be. Because of this approach there is an unquantifiable uncertainty in the ultimate glass volume projections due to model prediction uncertainties that has to be considered along with other system uncertainties such as waste compositions and amounts to be immobilized, split factors between LAW and HLW, etc.

Thermal behavior studies in building using artificial neural network for non air conditioned terrace house in Malaysia

International Nuclear Information System (INIS)

Zainazlan Md Zain; Mohd Nasir Taib; Shahrizam Mohd Shah Baki

2006-01-01

Strategies to improve energy efficiency in buildings have continuously being improved and becoming more effective as new knowledge on the building behavior and technology continue to develop. Nevertheless, effort to explore for further improvement must continuously undertake to seek more energy efficient and cost effective systems. Artificial Neural Network (ANN) is currently one of the most popular mechanisms to forecast any form of behavior and phenomena. Building thermal behavior can be studied and potential for energy utilization improvement without compromising thermal comfort can be explored using ANN. This paper explores the possibility of monitoring, predicting and forecasting the thermal behavior inside a building space and the optimization of building design. Typical result of experimental data and simulated data is presented. The sample house used adopted various thermal comfort strategies like cross ventilation and space air flow consideration

Characterization of Under-Building Contamination at Rocky Flats Implementing Environmental-Measurement While Drilling Process with Horizontal Directional Drilling

International Nuclear Information System (INIS)

WILLIAMS, CECELIA V.; LOCKWOOD, GRANT J.; NORMANN, RANDY A.; LINDSAY, THOMAS

2001-01-01

Characterization is required on thirty-one buildings at Rocky Flats Environmental Technology Site (RFETS or the Site) with known or suspected under building contamination. The Site has teamed with Sandia National Laboratory (SNL) to deploy Environmental Measure-While-Drilling (EMWD) in conjunction with horizontal directional drilling (HDD) to characterize under building contamination and to evaluate the performance and applicability for future characterization efforts. The Environmental Measurement-While-Drilling-Gamma Ray Spectrometer (EMWD-GRS) system represents an innovative blend of new and existing technology that provides the capability of producing real-time environmental drill bit data during drilling operations. The project investigated two locations, Building 886 and Building 123. Building 886 is currently undergoing D and D activities. Building 123 was demolished in 1998; however, the slab is present with under building process waste lines and utilities. This report presents the results of the EMWD Gamma Ray Spectrometer logging of boreholes at these two sites. No gamma emitting contamination was detected at either location.(author)

Reducing Vulnerability and Building Resilience in the Post-Disaster Context: A Case Study of the 2006 Yogyakarta Earthquake Recovery Effort

Directory of Open Access Journals (Sweden)

Erin Joakim

2016-05-01

Full Text Available As the human and economic costs of natural disaster events have dramatically increased over the past three decades, governments, researchers and humanitarian agencies have increasingly focused on reducing disaster impacts and increasing the resilience of individuals, households and communities. Recent disaster recovery efforts have focused on implementing a holistic social-ecological disaster risk reduction approach popularized through post-2004 tsunami recovery programs under the mantra of ‘building back better’. Although this approach has been increasingly adopted by various government and humanitarian organizations to describe their recovery and reconstruction activities, defining what is meant by ‘better’ and measuring ‘better’ as an outcome has been difficult to conceptualize and operationalize. In order to rectify this gap in the literature, the Post-Disaster Sustainable Livelihoods, Resilience and Vulnerability framework (PD-SLRV was developed for the purposes of analyzing, evaluating and monitoring disaster recovery using the concepts of vulnerability, resilience and sustainable livelihoods.Using the 2006 Yogyakarta, Indonesia earthquake as a case study, this paper will explore how the concepts of vulnerability, resilience and sustainable livelihoods inform the disaster recovery process, the nature of the relationship between these concepts as well as their usefulness in evaluating disaster recovery efforts. Through a detailed analysis of the various vulnerabilities and resiliencies that exist within recovering communities, the complex and dynamic nature of resilience and vulnerability is revealed, indicating a multifaceted relationship dependent on scale, context and place.

SHARP pre-release v1.0 - Current Status and Documentation

Energy Technology Data Exchange (ETDEWEB)

Mahadevan, Vijay S. [Argonne National Lab. (ANL), Argonne, IL (United States); Rahaman, Ronald O. [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-09-30

The NEAMS Reactor Product Line effort aims to develop an integrated multiphysics simulation capability for the design and analysis of future generations of nuclear power plants. The Reactor Product Line code suite’s multi-resolution hierarchy is being designed to ultimately span the full range of length and time scales present in relevant reactor design and safety analyses, as well as scale from desktop to petaflop computing platforms. In this report, building on a several previous report issued in September 2014, we describe our continued efforts to integrate thermal/hydraulics, neutronics, and structural mechanics modeling codes to perform coupled analysis of a representative fast sodium-cooled reactor core in preparation for a unified release of the toolkit. The work reported in the current document covers the software engineering aspects of managing the entire stack of components in the SHARP toolkit and the continuous integration efforts ongoing to prepare a release candidate for interested reactor analysis users. Here we report on the continued integration effort of PROTEUS/Nek5000 and Diablo into the NEAMS framework and the software processes that enable users to utilize the capabilities without losing scientific productivity. Due to the complexity of the individual modules and their necessary/optional dependency library chain, we focus on the configuration and build aspects for the SHARP toolkit, which includes capability to autodownload dependencies and configure/install with optimal flags in an architecture-aware fashion. Such complexity is untenable without strong software engineering processes such as source management, source control, change reviews, unit tests, integration tests and continuous test suites. Details on these processes are provided in the report as a building step for a SHARP user guide that will accompany the first release, expected by Mar 2016.

Effort-Based Decision-Making in Schizophrenia.

Science.gov (United States)

Culbreth, Adam J; Moran, Erin K; Barch, Deanna M

2018-08-01

Motivational impairment has long been associated with schizophrenia but the underlying mechanisms are not clearly understood. Recently, a small but growing literature has suggested that aberrant effort-based decision-making may be a potential contributory mechanism for motivational impairments in psychosis. Specifically, multiple reports have consistently demonstrated that individuals with schizophrenia are less willing than healthy controls to expend effort to obtain rewards. Further, this effort-based decision-making deficit has been shown to correlate with severity of negative symptoms and level of functioning, in many but not all studies. In the current review, we summarize this literature and discuss several factors that may underlie aberrant effort-based decision-making in schizophrenia.

Can envelope codes reduce electricity and CO2 emissions in different types of buildings in the hot climate of Bahrain?

International Nuclear Information System (INIS)

Radhi, H.

2009-01-01

The depletion of non-renewable resources and the environmental impact of energy consumption, particularly energy use in buildings, have awakened considerable interest in energy efficiency. Building energy codes have recently become effective techniques to achieve efficiency targets. The Electricity and Water Authority in Bahrain has set a target of 40% reduction of building electricity consumption and CO 2 emissions to be achieved by using envelope thermal insulation codes. This paper investigates the ability of the current codes to achieve such a benchmark and evaluates their impact on building energy consumption. The results of a simulation study are employed to investigate the impact of the Bahraini codes on the energy and environmental performance of buildings. The study focuses on air-conditioned commercial buildings and concludes that envelope codes, at best, are likely to reduce the energy use of the commercial sector by 25% if the building envelope is well-insulated and efficient glazing is used. Bahraini net CO 2 emissions could drop to around 7.1%. The simulation results show that the current energy codes alone are not sufficient to achieve a 40% reduction benchmark, and therefore, more effort should be spent on moving towards a more comprehensive approach

EURATOM achievements and challenges in facilitating Pan-European infrastructure collaborative efforts

International Nuclear Information System (INIS)

Garbil, Roger

2017-01-01

The European Atomic Energy Community (Euratom) Research and Training framework programmes are benefiting from a consistent success in pursuing excellence in research and facilitating Pan European collaborative efforts across a broad range of nuclear science and technologies, nuclear fission and radiation protection. To fulfil Euratom R and D programmes keys objectives of maintaining high levels of nuclear knowledge and building a more dynamic and competitive European industry, promotion of Pan-European mobility of researchers are implemented by co-financing transnational access to research infrastructures (RIs) and joint research activities. 'Euratom Achievements and Challenges' show the benefits of research efforts in key fields, of building an effective 'critical mass', of promoting the creation of 'centres of excellence' with an increased support for 'open access to key research infrastructures', exploitation of research results, management of knowledge, dissemination and sharing of learning outcomes.

New Orleans Sees School Building Boom

Science.gov (United States)

Robelen, Erik W.

2010-01-01

Efforts to reinvent public education in New Orleans after Hurricane Katrina have drawn such interest that it's easy to lose sight of some very concrete changes that will become obvious over time: A generation of brand-new school buildings is rising across the city. New Orleans is in the early stages of a construction spree both to build and…

ORGANIZATIONAL STRUCTURE FOR BUILDINGS RECONSTRUCTION OF HISTORICAL BUILDING OF ODESSA

Directory of Open Access Journals (Sweden)

POSTERNAK I. М.

2016-12-01

Full Text Available Formulation of the problem. As one of perspective forms of integration various complexes act in town-planning structure. In the course of formation of plans of social and economic development of large cities even more often there is a situation when for increase of efficiency of used resources concentration of efforts is necessary not simply, but also new progressive forms of the organization of building manufacture. Purpose. To offer the organizational structure using in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa 1820 … 1920 years under standards power efficiency and to execute researches engineering architectonics residential buildings of historical building of a city of Odessa. Conclusion. It is offered to create in the city of Odessa "the Corporate scientific and technical complex town-planning power reconstruction "CSTC T-PPR", as innovative organizational structure which uses in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa under standards power efficiency. It is considered engineering architectonics residential buildings of historical building of a city of Odessa, in particular, not looking on diverse buildings of inhabited appointment of Odessa, for them there are defining factors on which probably to make their grouping and at the same time to allocate the general lines inherent to a housing estate as a whole. It is resulted a general characteristic and classification of residential buildings of historical building of a city of Odessa ХІХ … beginnings ХХ centuries It is allocated and expanded classification of such buildings of inhabited appointment by duration of residing at them.

ORGANIZATIONAL STRUCTURE FOR RECONSTRUCTION OF BUILDINGS HISTORICAL BUILDING OF ODESSA

Directory of Open Access Journals (Sweden)

POSTERNAK I. М.

2017-05-01

Full Text Available Summary. Raising of problem. As one of perspective forms of integration various complexes act in town- planning structure. In the course of formation of plans of social and economic development of large cities even more often there is a situation when for increase of efficiency of used resources concentration of efforts is necessary not simply, but also new progressive forms of the organization of building manufacture. Purpose. To offer the organizational structure using in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa 1820 … 1920 years under standards power efficiency and to execute researches engineering architectonics residential buildings of historical building of a city of Odessa. Conclusion. It is offered to create in the city of Odessa "the Corporate scientific and technical complex town-planning power reconstruction "CSTC T-PPR", as innovative organizational structure which uses in practice the saved up scientific and technical potential for reconstruction of buildings of historical building of Odessa under standards power efficiency. It is considered engineering architectonics residential buildings of historical building of a city of Odessa, in particular, not looking on diverse buildings of inhabited appointment of Odessa, for them there are defining factors on which probably to make their grouping and at the same time to allocate the general lines inherent to a housing estate as a whole. It is resulted a general characteristic and classification of residential buildings of historical building of a city of Odessa ХІХ beginnings ХХ centuries It is allocated and expanded classification of such buildings of inhabited appointment by duration of residing at them.

Assessment Framework of Building Facade in Optimizing Indoor Thermal Comfort of Green Building Index (GBI Certified Office Building

Directory of Open Access Journals (Sweden)

Abdul Tharim Asniza Hamimi

2016-01-01

Full Text Available During the past decade, the construction industry has seen a new trend in the development of “green” or “sustainable” construction concept around the world with vast support from prominent organization, together with the introduction of sustainable building codes. The establishment of green building certification systems worldwide is seen as one of the most efforts in the emerging green building movement. In order to support the development of the “green” and “sustainable” concept in Malaysia, Green Building Index (GBI was launched by the government on 21 May 2009 that created to promote sustainability in the built environment and raise awareness of environmental issues. However, the construction industry seems to have focused only on findings the “right mechanism” for an environmentally sustainable “final result” in order for the building to be certified as green with the lacking of continuous assessment on the building performance after the certifications. This study is purposely conducted to investigate the performance of various rated Green Building Index (GBI Non-Residential New Construction office buildings and the influence on Indoor Thermal Comfort (ITC of the selected buildings. The aim is to develop an assessment framework for optimum green building architectural façade to be used for office buildings in Malaysia as well as to analyse the occupants’ perception, satisfaction and performance in the selected Green Building Index (GBI rated office indoor environment. This research is still in its infancy; therefore the paper is focused on research aims, research scope and methodology, and expected deliverables for the proposed research.

Incorporating risk communication into highly pathogenic avian influenza preparedness and response efforts.

Science.gov (United States)

Voss, Shauna J; Malladi, Sasidhar; Sampedro, Fernando; Snider, Tim; Goldsmith, Timothy; Hueston, William D; Lauer, Dale C; Halvorson, David A

2012-12-01

A highly pathogenic avian influenza (HPAI) outbreak in the United States will initiate a federal emergency response effort that will consist of disease control and eradication efforts, including quarantine and movement control measures. These movement control measures will not only apply to live animals but also to animal products. However, with current egg industry "just-in-time" production practices, limited storage is available to hold eggs. As a result, stop movement orders can have significant unintended negative consequences, including severe disruptions to the food supply chain. Because stakeholders' perceptions of risk vary, waiting to initiate communication efforts until an HPAI event occurs can hinder disease control efforts, including the willingness of producers to comply with the response, and also can affect consumers' demand for the product. A public-private-academic partnership was formed to assess actual risks involved in the movement of egg industry products during an HPAI event through product specific, proactive risk assessments. The risk analysis process engaged a broad representation of stakeholders and promoted effective risk management and communication strategies before an HPAI outbreak event. This multidisciplinary team used the risk assessments in the development of the United States Department of Agriculture, Highly Pathogenic Avian Influenza Secure Egg Supply Plan, a comprehensive response plan that strives to maintain continuity of business. The collaborative approach that was used demonstrates how a proactive risk communication strategy that involves many different stakeholders can be valuable in the development of a foreign animal disease response plan and build working relationships, trust, and understanding.

Veterinary public health capacity-building in India: a grim reflection of the developing world's underpreparedness to address zoonotic risks.

Science.gov (United States)

Kakkar, Manish; Abbas, Syed Shahid; Kumar, Ashok; Hussain, Mohammad Akhtar; Sharma, Kavya; Bhatt, Purvi Mehta; Zodpey, Sanjay

2013-01-01

Veterinary public health (VPH) is ideally suited to promote convergence between human, animal and environmental sectors. Recent zoonotic and emerging infectious disease events have given rise to increasing calls for efforts to build global VPH capacities. However, even with their greater vulnerability to such events, including their economic and livelihood impacts, the response from low-and middle-income countries such as India has been suboptimal, thereby elevating global health risks. Addressing risks effectively at the human-animal interface in these countries will require a clear vision, consistent policies, strategic approach and sustained political commitment to reform and refine the current VPH capacity-building efforts. Only then can the discipline serve its goal of disease prevention, poverty alleviation and support for sustainable livelihoods through improvements in human and animal health.

An exploratory study on the building information modeling adoption in United Arab Emirates municipal projects- current status and challenges

Directory of Open Access Journals (Sweden)

Venkatachalam Senthilkumar

2017-01-01

Full Text Available Many modern complex building projects in the public and private sectors are characterized by its poor information management which is manifested by time and cost overruns around the world. Building Information Modelling (BIM is currently being adopted around the world with various countries mandated its implementation. In specific, the implementation of BIM is rapidly growing in developed countries such as USA, UK, Singapore and Australia, with government mandate through devising strategies and initiatives to increase the adoption. The implementation of BIM in United Arab Emirates (UAE and other developing countries lags behind due to the existence of numerous implementation barriers. This study explores the current status of BIM implementation in the UAE municipalities, further explores the people, process and technology readiness towards BIM adoption in the UAE building projects. Further the study also explores the current challenges against the BIM adoption. The study adopts a positivists approach by collecting data through questionnaires, a sample of sixty participants across the UAE municipalities from different states were selected randomly to acquire the data. The collected data is statistically analyzed to obtain the findings. The analysis results showed that there are inadequate people and process related readiness towards BIM adoption whereas the technology readiness does exist. The same also was reflected in further analysis on BIM adoption barriers as the challenges. Further the paper also discusses the possible strategies adopted around the world through literature to address the explored challenges in the study

Analysis of Potential Benefits and Costs of Adopting ASHRAE Standard 90.1-2001 as the Commercial Building Energy Code in Tennessee

Energy Technology Data Exchange (ETDEWEB)

Cort, Katherine A.; Winiarski, David W.; Belzer, David B.; Richman, Eric E.

2004-09-30

ASHRAE Standard 90.1-2001 Energy Standard for Buildings except Low-Rise Residential Buildings (hereafter referred to as ASHRAE 90.1-2001 or 90.1-2001) was developed in an effort to set minimum requirements for the energy efficient design and construction of new commercial buildings. The State of Tennessee is considering adopting ASHRAE 90.1-2001 as its commercial building energy code. In an effort to evaluate whether or not this is an appropriate code for the state, the potential benefits and costs of adopting this standard are considered in this report. Both qualitative and quantitative benefits and costs are assessed. Energy and economic impacts are estimated using the Building Loads Analysis and System Thermodynamics (BLAST) simulations combined with a Life-Cycle Cost (LCC) approach to assess corresponding economic costs and benefits. Tennessee currently has ASHRAE Standard 90A-1980 as the statewide voluntary/recommended commercial energy standard; however, it is up to the local jurisdiction to adopt this code. Because 90A-1980 is the recommended standard, many of the requirements of ASHRAE 90A-1980 were used as a baseline for simulations.

Courtyard as a Passive Cooling Strategy in Buildings

Directory of Open Access Journals (Sweden)

Markus Bulus

2017-01-01

Full Text Available One of the most significant current discussions in the built environment, architectural practice, theory, and procedures is “Passive Design”. It is becoming very difficult to ignore the issues of passive architectural design strategies in buildings. Recent studies emphasized the need for passive architectural design strategies and the application of the courtyard as a passive design strategy for cooling in buildings. Also, that the courtyard is very suitable in almost all building typologies in all the climatic zones due to its passive tendencies for cooling. Its cooling potentials can be achieved only when design requirements are not ignored. The courtyard has social, cultural, religious, and environmental benefits. Despite its abundant advantages, research effort towards courtyard design requirements is very scarce. Therefore, the main objective of this study is to investigate the design of central courtyard as a passive cooling strategy for improving indoor thermal comfort in Universiti Teknologi Malaysia (UTM Buildings. Courtyard design requirement such as the courtyard configurations, orientation, and natural features in courtyard buildings in UTM were investigated. Besides the design variants, courtyard usage in such buildings was also examined. The methodology of this study involved the developing of a checklist based on literature for the field survey. Forty-six (46 courtyards in thirty-two (32 buildings in UTM were surveyed, and the statistical description method was used to interpret and analyzed the data. The Results of this quantitative study shows that UTM central courtyards buildings were designed based on a cautious consideration to orientation and configurations to enhance their effective passive cooling potentials, however, only two courtyards had water pools. The study concluded that courtyards in UTM buildings are creatively designed but future experimental studies to appraise their thermal performances is required, and

Building performance simulation as a design tool for refurbishment of buildings

NARCIS (Netherlands)

Hensen, J.L.M.; Bartak, M.; Drkal, F.; Dunovska, T.; Lain, M.; Matuska, T.; Schwarzer, J.; Sourek, B.; Bednar, T.

2004-01-01

This paper attempts to outline the current state-of-the-art regarding the use of building performance simulation as a design tool for refurbishment of buildings. This is illus-trated by means of three recent studies for conversion of historical buildings (an early 20th century factory, and a water

Analysis of Potential Benefits and Costs of Adopting ASHRAE Standard 90.1-1999 as a Commercial Building Energy Code in Michigan

Energy Technology Data Exchange (ETDEWEB)

Cort, Katherine A.; Belzer, David B.; Halverson, Mark A.; Richman, Eric E.; Winiarski, David W.

2002-09-30

The state of Michigan is considering adpoting ASHRAE 90.1-1999 as its commercial building energy code. In an effort to evaluate whether or not this is an appropraite code for the state, the potential benefits and costs of adopting this standard are considered. Both qualitative and quantitative benefits are assessed. The energy simulation and economic results suggest that adopting ASHRAE 90.1-1999 would provide postitive net benefits to the state relative to the building and design requirements currently in place.

Empirical Validation of Building Simulation Software : Modeling of Double Facades

DEFF Research Database (Denmark)

Kalyanova, Olena; Heiselberg, Per

The work described in this report is the result of a collaborative effort of members of the International Energy Agency (IEA), Task 34/43: Testing and validation of building energy simulation tools experts group.......The work described in this report is the result of a collaborative effort of members of the International Energy Agency (IEA), Task 34/43: Testing and validation of building energy simulation tools experts group....

The Nuclear Power Landscape in the Post-Fukushima Era: Thoughts on the Current and Future Effects on Nuclear New-Build

International Nuclear Information System (INIS)

Tyobeka, B.

2012-01-01

The nuclear landscape looked very promising before the Fukushima Daiichi accident. In the past five years before the accident, so-called Nuclear Rennainsance looked to be in full swing, with many countries beginning to factor nuclear energy as part of their electricity generation mix. At some point, 43 IAEA Members States confirmed their interest in launching new nuclear power programmes. Whilst only two of these nuclear new-comers have already chosen the reactor designs they would deploy in their new build, it is commonly accepted that the so-called Generation III and Generation III+ would mostly be the designs of the choice for new nuclear build. This presentation seeks to examine the current status of plans for nuclear build after Fukushima, looking into technology and safety issues that would influence the final policy decisions in new nuclear build programmes.(author).

The Missouri River Floodplain: History of Oak Forest & Current Restoration Efforts

Science.gov (United States)

Daniel C. Dey; Dirk Burhans; John Kabrick; Brain Root; Jennifer Grabner; Mike Gold

2000-01-01

Efforts to restore floodplains are complicated by our variable understanding of history and ecology; our lack of knowledge of past environmental and vegetative conditions; and our differing viewpoints of what natural, what the role of humans is in the ecosystem, and what the desirable restored state is. Managers are challenged to decide how to restore native vegetation...

Building Energy Monitoring and Analysis

Energy Technology Data Exchange (ETDEWEB)

Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

2013-06-01

This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

Refurbishment and school buildings management in a smart building environment

Science.gov (United States)

Di Giuda, Giuseppe Martino; Villa, Valentina; Tagliabue, Lavinia Chiara; Giana, Paolo Ettore; Rinaldi, Stefano; Ciribini, Angelo Luigi Camillo

2018-05-01

Building Information Modelling is a methodology, which is able to take into account many data, both geometrical and non-geometrical, in order to evaluate at the actual condition of the asset. The project has the scope of evaluating the conditions of different school buildings, in order to develop a way to choose the best-tailored management solution to the owner. A further step is the management and planning of design solutions during the life cycle customized on monitored buildings' conditions. The research work focuses on providing a support decisions concerning the gap between the present building state laws and the current state of the existing buildings. The process will be developed in an expanded BIM environment, using sensors, which will give back the state of the consistency of the actual conditions to enable the buildings to adapt themselves in the best way into their specific constraints and boundaries. The results of the study are (i) a complete workflow to make decision and the possibility to shape the decision process on an objective through a scientific approach, (ii) evaluate the current state of the asset and (iii) manage maintenance in the lifespan. Further development will take in consideration all the aspects related to management of big data environment generated by a smart buildings system.

EURATOM achievements and challenges in facilitating Pan-European infrastructure collaborative efforts

Energy Technology Data Exchange (ETDEWEB)

Garbil, Roger [European Commission, Brussels (Belgium). DG Research and Innovation, Euratom Fission

2017-10-15

The European Atomic Energy Community (Euratom) Research and Training framework programmes are benefiting from a consistent success in pursuing excellence in research and facilitating Pan European collaborative efforts across a broad range of nuclear science and technologies, nuclear fission and radiation protection. To fulfil Euratom R and D programmes keys objectives of maintaining high levels of nuclear knowledge and building a more dynamic and competitive European industry, promotion of Pan-European mobility of researchers are implemented by co-financing transnational access to research infrastructures (RIs) and joint research activities. 'Euratom Achievements and Challenges' show the benefits of research efforts in key fields, of building an effective 'critical mass', of promoting the creation of 'centres of excellence' with an increased support for 'open access to key research infrastructures', exploitation of research results, management of knowledge, dissemination and sharing of learning outcomes.

Nano-based PCMs for building energy efficiency

Energy Technology Data Exchange (ETDEWEB)

Biswas, Kaushik [ORNL

2016-01-01

Thermal storage using phase change materials (PCMs) is seen as a viable method for improving the energy efficiency of buildings. PCMs have been used in building applications in various forms PCM slurries in heat exchangers, macro- or microencapsulated PCMs in building envelopes, bulk PCM for modulating photovoltaic temperatures, etc. In the last decade a new class of PCMs, called nano-enhanced PCM (or nanoPCM), has been extensively investigated with the goal of improving the heat transfer and thermal storage properties of PCMs. NanoPCMs can primarily be categorized as nano-encapsulated PCMs and nanoparticle-PCM composites. The former are nano-sized capsules in which the PCM forms the core and is surrounded by a high-conductivity membrane or shell. The latter consist of PCM supported within nanostructures or nanoparticles dispersed in PCMs. This article reviews the current state of nanoPCM synthesis and characterization of their heat transfer and thermal storage properties. Further, a critical review of nanoPCM applications and their potential energy benefits is performed. Nano-enhanced PCMs exhibit higher thermal conductivities than regular PCM. However, whether the higher conductivity is desirable in all applications and if the property enhancements are worth the cost and effort needed to create nanoPCMs are questions that still need to be answered.

Designing domestic buildings for future summers: Attitudes and opinions of building professionals

International Nuclear Information System (INIS)

Gul, Mehreen S.; Menzies, Gillian F.

2012-01-01

A changing climate will produce summertime overheating where conventional domestic building design approaches do not adequately address future warming risk. This risk cannot be fully identified and avoided unless future climate information and building related adaptation measures are considered. The Low Carbon Futures project is developing a tool that uses UKCP09 climate projections input to predict dwelling overheating risks. To enhance the usefulness of this tool for the building industry, and to better understand current building design processes, interviews were conducted with building professionals, allowing industry preferences for the tool to be sought and to provide clearer indications of proposed outcomes. This paper examines results from a questionnaire, focus groups and semi-structured interviews with building industry professionals. The research shows that the housing industry maintains adherence to traditional designing methods where overheating, whether current or future, is not considered a serious concern. No design stage detailed overheating assessments are currently undertaken to reduce the UK's increased room air-conditioner sales, despite drives for low energy/zero carbon homes. The collated feedback will help tailor the tool and its eventual outputs, with this paper attempting to converge on a set of recommendations for low carbon dwelling design with reduced overheating risk. - Highlights: ► Interviews to gauge attitudes of building professionals towards future warming. ► Client requirements, capital costs and regulations take priority in typical practice. ► No actions are currently taken to prevent overheating risks in the housing sector. ► Overheating risks in housing can be tackled by the use of dynamic modelling. ► The LCF tool further helps to adapt a dwelling to reduce future overheating risks.

National Energy Audit Tool for Multifamily Buildings Development Plan

Energy Technology Data Exchange (ETDEWEB)

Malhotra, Mini [ORNL; MacDonald, Michael [Sentech, Inc.; Accawi, Gina K [ORNL; New, Joshua Ryan [ORNL; Im, Piljae [ORNL

2012-03-01

The U.S. Department of Energy's (DOE's) Weatherization Assistance Program (WAP) enables low-income families to reduce their energy costs by providing funds to make their homes more energy efficient. In addition, the program funds Weatherization Training and Technical Assistance (T and TA) activities to support a range of program operations. These activities include measuring and documenting performance, monitoring programs, promoting advanced techniques and collaborations to further improve program effectiveness, and training, including developing tools and information resources. The T and TA plan outlines the tasks, activities, and milestones to support the weatherization network with the program implementation ramp up efforts. Weatherization of multifamily buildings has been recognized as an effective way to ramp up weatherization efforts. To support this effort, the 2009 National Weatherization T and TA plan includes the task of expanding the functionality of the Weatherization Assistant, a DOE-sponsored family of energy audit computer programs, to perform audits for large and small multifamily buildings This report describes the planning effort for a new multifamily energy audit tool for DOE's WAP. The functionality of the Weatherization Assistant is being expanded to also perform energy audits of small multifamily and large multifamily buildings. The process covers an assessment of needs that includes input from national experts during two national Web conferences. The assessment of needs is then translated into capability and performance descriptions for the proposed new multifamily energy audit, with some description of what might or should be provided in the new tool. The assessment of needs is combined with our best judgment to lay out a strategy for development of the multifamily tool that proceeds in stages, with features of an initial tool (version 1) and a more capable version 2 handled with currently available resources. Additional

Vacuum Insulation Panels (VIPs) for building construction industry - A review of the contemporary developments and future directions

International Nuclear Information System (INIS)

Alam, M.; Singh, H.; Limbachiya, M.C.

2011-01-01

Highlights: → Vacuum Insulation Panels (VIP), a high thermal resistance building insulation. → Review of research into VIPs for building applications. → High cost and uncertainty of service life are two barriers for VIP use in buildings. → SiO 2 /SiN x coated PET laminate- candidate for high barrier VIP envelope. → The optimum combination of VIP core and envelope yet to be determined. -- Abstract: Demand for energy efficient buildings has increased drastically in recent years and this trend will continue in the future. Insulating building elements will play a key role in meeting this demand by reducing heat losses through the building fabric. Due to their higher thermal resistance, Vacuum Insulation Panels (VIPs) would be a more energy efficient alternative to conventional building insulation materials. Thus, efforts to develop VIPs with characteristics suitable for applications to new and existing buildings are underway. This paper provides a review of important contemporary developments towards producing VIPs using various materials such as glass fibre, foams, perlite and fibre/powder composites. The limitations of the materials currently used to fabricate VIPs have not been emphasised in detail in previous review papers published. Selection criteria, methods to measure important properties of VIPs and analytical and numerical models presented in the past have been detailed. Limitations of currently employed design tools along with potential future materials such as Nano/microcellular foams and SiO x /SiN x coatings for use in VIPs are also described.

CHIRAC'S GAULLISM - WHY FRANCE HAS BECOME THE DRIVING FORCE BEHIND THE EFFORT TO BUILD AN AUTONOMOUS EUROPEAN DEFENCE?

Directory of Open Access Journals (Sweden)

Marcel H. Van Herpen

2004-05-01

Full Text Available The author analyses Chirac’s European defence policy and how it fits into the Gaullist tradition. He starts by sketching the original Gaullism of General De Gaulle which is based on four pillars: a national industrial policy, an independent foreign policy, the possession of a French nuclear deterrent and the ambition to build an independent European defence. His efforts in the last realm, however, are blocked by the US and its European NATO allies. In the Non-Gaullist Interregnum between 1974-1995 President Giscard d’Estaing jeopardised the Gaullist legacy, but President François Mitterrand became – against all expectations – a ‘Socialist Gaullist’ and it was he who realised one of De Gaulle’s objectives by creating the Eurocorps. His successor, Jacques Chirac has conducted a highly volatile European policy. The author distinguishes no less than six different and often contradictory phases in Chirac’s European defence policy. Despite the failures, some successes, however, have been booked, especially after the Saint-Malo Summit with Tony Blair. But much will depend in the coming years on how Chirac will succeed his balancing act between the EU-25, the French-German tandem and the ‘Big Three’.

The 50th Anniversary of the International Indian Ocean Expedition: An Update on Current Planning Efforts and Progress

Science.gov (United States)

Hood, Raleigh; D'Adamo, Nick; Burkill, Peter; Urban, Ed; Bhikajee, Mitrasen

2014-05-01

The International Indian Ocean Expedition (IIOE) was one of the greatest international, interdisciplinary oceanographic research efforts of all time. Planning for the IIOE began in 1959 and the project officially continued through 1965, with forty-six research vessels participating under fourteen different flags. The IIOE motivated an unprecedented number of hydrographic surveys (and repeat surveys) over the course of the expedition covering the entire Indian Ocean basin. And it was an interdisciplinary endeavor that embraced physical oceanography, chemical oceanography, meteorology, marine biology, marine geology and geophysics. The end of 2015 will mark the 50th Anniversary of the completion of the IIOE. In the 50 years since the IIOE three fundamental changes have taken place in ocean science. The first is the deployment of a broad suite of oceanographic sensors on satellites that have dramatically improved the characterization of both physical and biological oceanographic variability. The second is the emergence of new components of the ocean observing system, most notably remote sensing and Argo floats. And the third is the development of ocean modeling in all its facets from short-term forecasting to seasonal prediction to climate projections. These advances have revolutionized our understanding of the global oceans, including the Indian Ocean. Compared to the IIOE era, we now have the capacity to provide a much more integrated picture of the Indian Ocean, especially if these new technologies can be combined with targeted and well-coordinated in situ measurements. In this presentation we report on current efforts to motivate an IIOE 50th Anniversary Celebration (IIOE-2). We envision this IIOE-2 as a 5-year expedition and effort beginning in 2015 and continuing through to 2020. An important objective of our planning efforts is assessing ongoing and planned research activities in the Indian Ocean in the 2015 to 2020 time frame, with the goal of embracing and

Mapping telemedicine efforts

DEFF Research Database (Denmark)

Kierkegaard, Patrick

2015-01-01

are being utilized? What medical disciplines are being addressed using telemedicine systems? Methods: All data was surveyed from the "Telemedicinsk Landkort", a newly created database designed to provide a comprehensive and systematic overview of all telemedicine technologies in Denmark. Results......Objectives: The aim of this study is to survey telemedicine services currently in operation across Denmark. The study specifically seeks to answer the following questions: What initiatives are deployed within the different regions? What are the motivations behind the projects? What technologies......: The results of this study suggest that a growing number of telemedicine initiatives are currently in operation across Denmark but that considerable variations existed in terms of regional efforts as the number of operational telemedicine projects varied from region to region. Conclusions: The results...

Quantifying commercial catch and effort of monkfish Lophius ...

African Journals Online (AJOL)

Catch-per-unit-effort (cpue) data of vessels targeting monkfish and sole (the two ... analysed using two different methods to construct indices of abundance. ... in Namibia to all tail-weight classes is not appropriate for the current fishery and needs ... Keywords: catch per unit effort, Generalized Linear Model, Lophius vaillanti, ...

How energy efficiency fails in the building industry

International Nuclear Information System (INIS)

Ryghaug, Marianne; Sorensen, Knut H.

2009-01-01

This paper examines how energy efficiency fails in the building industry based on many years of research into the integration of energy efficiency in the construction of buildings and sustainable architecture in Norway. It argues that energy-efficient construction has been seriously restrained by three interrelated problems: (1) deficiencies in public policy to stimulate energy efficiency, (2) limited governmental efforts to regulate the building industry, and (3) a conservative building industry. The paper concludes that innovation and implementation of new, energy-efficient technologies in the building industry requires new policies, better regulations and reformed practices in the industry itself

Motivation and effort in individuals with social anhedonia.

Science.gov (United States)

McCarthy, Julie M; Treadway, Michael T; Blanchard, Jack J

2015-06-01

It has been proposed that anhedonia may, in part, reflect difficulties in reward processing and effortful decision making. The current study aimed to replicate previous findings of effortful decision making deficits associated with elevated anhedonia and expand upon these findings by investigating whether these decision making deficits are specific to elevated social anhedonia or are also associated with elevated positive schizotypy characteristics. The current study compared controls (n=40) to individuals elevated on social anhedonia (n=30), and individuals elevated on perceptual aberration/magical ideation (n=30) on the Effort Expenditure for Rewards Task (EEfRT). Across groups, participants chose a higher proportion of hard tasks with increasing probability of reward and reward magnitude, demonstrating sensitivity to probability and reward values. Contrary to our expectations, when the probability of reward was most uncertain (50% probability), at low and medium reward values, the social anhedonia group demonstrated more effortful decision making than either individuals high in positive schizotypy or controls. The positive schizotypy group only differed from controls (making less effortful choices than controls) when reward probability was lowest (12%) and the magnitude of reward was the smallest. Our results suggest that social anhedonia is related to intact motivation and effort for monetary rewards, but that individuals with this characteristic display a unique and perhaps inefficient pattern of effort allocation when the probability of reward is most uncertain. Future research is needed to better understand effortful decision making and the processing of reward across a range of individual difference characteristics. Copyright © 2015 Elsevier B.V. All rights reserved.

The Role of Energy Storage in Commercial Building

Energy Technology Data Exchange (ETDEWEB)

Kintner-Meyer, Michael CW; Subbarao, Krishnappa; Prakash Kumar, Nirupama; Bandyopadhyay, Gopal K.; Finley, C.; Koritarov, V. S.; Molburg, J. C.; Wang, J.; Zhao, Fuli; Brackney, L.; Florita, A. R.

2010-09-30

Motivation and Background of Study This project was motivated by the need to understand the full value of energy storage (thermal and electric energy storage) in commercial buildings, the opportunity of benefits for building operations and the potential interactions between a building and a smart grid infrastructure. On-site or local energy storage systems are not new to the commercial building sector; they have been in place in US buildings for decades. Most building-scale storage technologies are based on thermal or electrochemical storage mechanisms. Energy storage technologies are not designed to conserve energy, and losses associated with energy conversion are inevitable. Instead, storage provides flexibility to manage load in a building or to balance load and generation in the power grid. From the building owner's perspective, storage enables load shifting to optimize energy costs while maintaining comfort. From a grid operations perspective, building storage at scale could provide additional flexibility to grid operators in managing the generation variability from intermittent renewable energy resources (wind and solar). To characterize the set of benefits, technical opportunities and challenges, and potential economic values of storage in a commercial building from both the building operation's and the grid operation's view-points is the key point of this project. The research effort was initiated in early 2010 involving Argonne National Laboratory (ANL), the National Renewable Energy Laboratory (NREL), and Pacific Northwest National Laboratory (PNNL) to quantify these opportunities from a commercial buildings perspective. This report summarizes the early discussions, literature reviews, stakeholder engagements, and initial results of analyses related to the overall role of energy storage in commercial buildings. Beyond the summary of roughly eight months of effort by the laboratories, the report attempts to substantiate the importance of

Building a Science Software Institute: Synthesizing the Lessons Learned from the ISEES and WSSI Software Institute Conceptualization Efforts

Science.gov (United States)

Idaszak, R.; Lenhardt, W. C.; Jones, M. B.; Ahalt, S.; Schildhauer, M.; Hampton, S. E.

2014-12-01

The NSF, in an effort to support the creation of sustainable science software, funded 16 science software institute conceptualization efforts. The goal of these conceptualization efforts is to explore approaches to creating the institutional, sociological, and physical infrastructures to support sustainable science software. This paper will present the lessons learned from two of these conceptualization efforts, the Institute for Sustainable Earth and Environmental Software (ISEES - http://isees.nceas.ucsb.edu) and the Water Science Software Institute (WSSI - http://waters2i2.org). ISEES is a multi-partner effort led by National Center for Ecological Analysis and Synthesis (NCEAS). WSSI, also a multi-partner effort, is led by the Renaissance Computing Institute (RENCI). The two conceptualization efforts have been collaborating due to the complementarity of their approaches and given the potential synergies of their science focus. ISEES and WSSI have engaged in a number of activities to address the challenges of science software such as workshops, hackathons, and coding efforts. More recently, the two institutes have also collaborated on joint activities including training, proposals, and papers. In addition to presenting lessons learned, this paper will synthesize across the two efforts to project a unified vision for a science software institute.

Review of Current Nuclear Vacuum System Technologies

International Nuclear Information System (INIS)

Carroll, M.; McCracken, J.; Shope, T.

2003-01-01

Nearly all industrial operations generate unwanted dust, particulate matter, and/or liquid wastes. Waste dust and particulates can be readily tracked to other work locations, and airborne particulates can be spread through ventilation systems to all locations within a building, and even vented outside the building - a serious concern for processes involving hazardous, radioactive, or nuclear materials. Several varieties of vacuum systems have been proposed and/or are commercially available for clean up of both solid and liquid hazardous and nuclear materials. A review of current technologies highlights both the advantages and disadvantages of the various systems, and demonstrates the need for a system designed to address issues specific to hazardous and nuclear material cleanup. A review of previous and current hazardous/nuclear material cleanup technologies is presented. From simple conventional vacuums modified for use in industrial operations, to systems specifically engineered for such purposes, the advantages and disadvantages are examined in light of the following criteria: minimal worker exposure; minimal secondary waste generation;reduced equipment maintenance and consumable parts; simplicity of design, yet fully compatible with all waste types; and ease of use. The work effort reviews past, existing and proposed technologies in light of such considerations. Accomplishments of selected systems are presented, including identified areas where technological improvements could be suggested

National High Frequency Radar Network (hfrnet) and Pacific Research Efforts

Science.gov (United States)

Hazard, L.; Terrill, E. J.; Cook, T.; de Paolo, T.; Otero, M. P.; Rogowski, P.; Schramek, T. A.

2016-12-01

The U.S. High Frequency Radar Network (HFRNet) has been in operation for over ten years with representation from 31 organizations spanning academic institutions, state and local government agencies, and private organizations. HFRNet currently holds a collection from over 130 radar installations totaling over 10 million records of surface ocean velocity measurements. HFRNet is a primary example of inter-agency and inter-institutional partnerships for improving oceanographic research and operations. HF radar derived surface currents have been used in several societal applications including coastal search and rescue, oil spill response, water quality monitoring and marine navigation. Central to the operational success of the large scale network is an efficient data management, storage, access, and delivery system. The networking of surface current mapping systems is characterized by a tiered structure that extends from the individual field installations to local regional operations maintaining multiple sites and on to centralized locations aggregating data from all regions. The data system development effort focuses on building robust data communications from remote field locations (sites) for ingestion into the data system via data on-ramps (Portals or Site Aggregators) to centralized data repositories (Nodes). Centralized surface current data enables the aggregation of national surface current grids and allows for ingestion into displays, management tools, and models. The Coastal Observing Research and Development Center has been involved in international relationships and research in the Philippines, Palau, and Vietnam. CORDC extends this IT architecture of surface current mapping data systems leveraging existing developments and furthering standardization of data services for seamless integration of higher level applications. Collaborations include the Philippine Atmospheric Geophysical and Astronomical Services Administration (PAGASA), The Coral Reef Research

Sustainability of NGO capacity building in southern Africa: successes and opportunities.

Science.gov (United States)

Humphries, Debbie; Gomez, Ligia; Hartwig, Kari

2011-01-01

Despite an increase in organizational capacity building efforts by external organizations in low and middle income countries, the documentation of these efforts and their effects on health programs and systems remains limited. This paper reviews key frameworks for considering sustainability of capacity building and applies these frameworks to an evaluation of the sustainability of an AIDS non-governmental organization (NGO) capacity building initiative. From 2004-2007 Bristol-Myers Squibb Foundation's Secure the Future(TM) initiative in southern Africa funded a five country program, the NGO Training Institute (NGOTI), to build capacity of NGOs working to address HIV/AIDS. Lessons learned from this project include issues of ownership, the importance of integrating planning for sustainability within capacity-building projects, and the value of identifying primary capacity-building objectives in order to select sustainability strategies that are focused on maintaining program benefits. Sustainability for capacity building projects can be developed by discussing key issues early in the planning process with all primary stakeholders. Copyright © 2010 John Wiley & Sons, Ltd.

Age-Related Changes in Children's Understanding of Effort and Ability: Implications for Attribution Theory and Motivation

Science.gov (United States)

Folmer, Amy S.; Cole, David A.; Sigal, Amanda B.; Benbow, Lovisa D.; Satterwhite, Lindsay F.; Swygert, Katherine E.; Ciesla, Jeffrey A.

2008-01-01

Building on Nicholls's earlier work, we examined developmental changes in children's understanding of effort and ability when faced with a negative outcome. In a sample of 166 children and adolescents (ages 5-15 years), younger children conflated the meaning of effort and ability, explaining that smart students work hard, whereas older children…

Environmental effect of structural solutions and building materials to a building

International Nuclear Information System (INIS)

Haapio, Appu; Viitaniemi, Pertti

2008-01-01

The field of building environmental assessment tools has become a popular research area over the past decade. However, how the service life of a building affects the results of the environmental assessment of a building has not been emphasised previously. The aim of this study is to analyse how different structural solutions and building materials affect the results of the environmental assessment of a whole building over the building's life cycle. Furthermore, how the length of the building's service life affects the results is analysed. The environmental assessments of 78 single-family houses were calculated for this study. The buildings have different wall insulations, claddings, window frames, and roof materials, and the length of the service life varies from 60 years up to 160 years. The current situation and the future of the environmental assessment of buildings are discussed. In addition, topics for further research are suggested; for example, how workmanship affects the service life and the environmental impact of a building should be studied

Building Open in Engineering

OpenAIRE

Berg, Devin

2018-01-01

A description of ongoing efforts to build a culture for open in engineering. I will overview some of the tools that have been developed to promote open practices in engineering and discuss some of the barriers to adoption within the field.Presented 27 March 2018 at the "E"ffordabilitiy Summit, Menomonie, WI.

Hanford site post-NPH building inspection plan

International Nuclear Information System (INIS)

Wagenblast, G.R. Westinghouse Hanford

1996-01-01

This plan establishes consistent post-NPH building inspection procedures and defines a procedure for prioritization of buildings for inspection to ensure the safety of facilities prior to reentry. Qualification of systems for restart of operation is not included. This plan takes advantage, where possible, of existing national procedures for post-NPH inspection of buildings, of existing structural design and evaluation documentation of Hanford facilities, and current and proposed seismic instrumentation located throughout the Hanford site. A list of buildings, prioritized according to current building safety function and building vulnerability (without regard for or information about a damaging natural forces event) is provided

Innovations in building regulation and control for advancing sustainability in buildings (I)

NARCIS (Netherlands)

Meacham, B.; Visscher, H.J.; Meijer, F.M.; Chan, C.; Chan, E.; Laubscher, J.; Neng Kwei Sung, J.; Dodds, B.; Serra, J.; Tenorio, J.A.; Echeverria, J.B.; Sanches-Ostiz, A.

2014-01-01

This session brings together policy-makers, government officials, researchers and others to present perspectives on how innovation in building regulation and control, such as performancebased approaches, are currently being used to advance sustainability concepts in buildings, and where and how we

Federal High Performance and Sustainable Buildings: Guiding Principles for the Laboratory Support Building (LSB)

Energy Technology Data Exchange (ETDEWEB)

Pope, Jason E.

2014-09-01

This report documents the federal Guiding Principles conformance effort for LSB at PNNL. The effort is part of continued progress toward a campus building inventory that is 100% compliant with the Guiding Principles. The report documentation provides a narrative of how the LSB complies with each of the Guiding Principles requirements. These narratives draw from the many sources that are explained in the text and rely on extensive data collection. The descriptions point to each of these sources, providing the reader with specific policies, procedures, and data points.

Building information deduced

DEFF Research Database (Denmark)

Tamke, Martin; Myrup Jensen, Morten; Beetz, Jakob

2014-01-01

In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show that in p......In recent years, Building Information Models have become commonplace in building profession. The extensive use and increasing experience with BIM models offers new perspectives and potentials for design and planning. A recent stakeholder study conducted by the authors of this paper show...... that in practice models are no longer solely observed as culmination of knowledge in a 3d representation of future built structures, but as a source of information in itself. Experienced users of BIM want to Find Information within a model or across a set of these and Compare models in order to evaluate states...... of a model, differences in separate models or models from different point of time. Current BIM tools support both modes only in a rudimentary form. This paper discusses current modes of information query within and across BIM models, shows beneficial scenarios for building and planning practice through...

Preliminary hazard classification for Building 107-N

International Nuclear Information System (INIS)

Kloster, G.L.; Smith, R.L.

1997-06-01

Deactivation activities are planned for Building 107-N (Basin Recirculation Building). This document establishes the preliminary hazard classification (PHC) for the 100-N Area facility segment that includes this building.To establish the PHC, the inventories of radioactive and nonradioactive hazardous materials present within Building 107-N are identified and then compared to the corresponding threshold quantity values in DOE (1992) and reportable quantity values in 40 CFR 302.4. In this evaluation, no credit is taken for the form, location, and dispersibility of the materials; for their interaction with available energy sources; or for safety features that could prevent or mitigate a radioactive release. The result of this effort concluded that the PHC for Building 107-N is Nuclear Category 3

Do Effort and Reward at Work Predict Changes in Cognitive Function? First Longitudinal Results from the Representative German Socio-Economic Panel.

Science.gov (United States)

Riedel, Natalie; Siegrist, Johannes; Wege, Natalia; Loerbroks, Adrian; Angerer, Peter; Li, Jian

2017-11-15

It has been suggested that work characteristics, such as mental demands, job control, and occupational complexity, are prospectively related to cognitive function. However, current evidence on links between psychosocial working conditions and cognitive change over time is inconsistent. In this study, we applied the effort-reward imbalance model that allows to build on previous research on mental demands and to introduce reward-based learning as a principle with beneficial effect on cognitive function. We aimed to investigate whether high effort, high reward, and low over-commitment in 2006 were associated with positive changes in cognitive function in terms of perceptual speed and word fluency (2006-2012), and whether the co-manifestation of high effort and high reward would yield the strongest association. To this end, we used data on 1031 employees who participated in a large and representative study. Multivariate linear regression analyses supported our main hypotheses (separate and combined effects of effort and reward), particularly on changes in perceptual speed, whereas the effects of over-commitment did not reach the level of statistical significance. Our findings extend available knowledge by examining the course of cognitive function over time. If corroborated by further evidence, organization-based measures in the workplace can enrich efforts towards preventing cognitive decline in ageing workforces.

75 FR 20833 - Building Energy Codes

Science.gov (United States)

2010-04-21

...-0012] Building Energy Codes AGENCY: Office of Energy Efficiency and Renewable Energy, Department of... the current model building energy codes or their equivalent. DOE is interested in better understanding... codes, Standard 90.1-2007, Energy Standard for Buildings Except Low-Rise Residential Buildings (or...

EURATOM Success Stories in Facilitating Pan-European E&T Collaborative Efforts

International Nuclear Information System (INIS)

Garbil, R.

2016-01-01

Full text: The European Atomic Energy Community (Euratom) Research and Training framework programmes are benefiting from a consistent success in pursuing excellence in research and facilitating Pan-European collaborative efforts across a broad range of nuclear science and technologies, nuclear fission and radiation protection. To fulfil Euratom R&D programmes keys objectives of maintaining high levels of nuclear knowledge and building a more dynamic and competitive European industry, promotion of Pan-European mobility of researchers are implemented by co-financing transnational access to research infrastructures and joint research activities through to research and innovation and coordination and support actions funding schemes. Establishment by the research community of European technology platforms are being capitalized. Mapping of research infrastructures and E&T capabilities is allowing a closer cooperation within the European Union and beyond, benefiting from multilateral international agreements and from closer cooperation between Euratom, OECD/NEA and IAEA and international fora. “Euratom success stories” in facilitating Pan-European E&T collaborative efforts through research and training framework programmes show the benefits of research efforts in key fields, of building an effective “critical mass”, of promoting the creation of “centres of excellence” with an increased support for “open access to key research infrastructures”, exploitation of research results, management of knowledge, dissemination and sharing of learning outcomes. (author

GeosciNET: Building a Global Geoinformatics Partnership

Science.gov (United States)

Snyder, W. S.; Lehnert, K. A.; Ito, E.; Harms, U.; Klump, J.

2008-12-01

GeosciNET is a collaboration of several existing geoinformatics efforts organized to provide a more effective data system for geoscience projects. Current members are: CoreWall (www.corewall.org), Geoinformatics for Geochemistry (GfG; www.geoinfogeochem.org), System for Earth Sample Registration (SESAR; www.geosamples.org ), GeoStrat SYS (www.geostratsys.org (formerly: PaleoStrat, www.paleostrat.org)), and the International Continental Drilling Program (ICDP; www.icdp-online.org). GeosciNET's basic goal is to advance coordination, complementarity, and interoperability, and minimize duplication of efforts among the involved partner systems in order to streamline the development and operation of geoinformatics efforts. We believe that by advancing the development and data holdings of its member groups, the overall value of each site will be significantly enhanced and better meet the needs of the users. With the existing membership, GeosciNET can offer a comprehensive, integrated system for data acquisition, dissemination, archiving, visualization, integration, and analysis. The system will enable a single researcher or a group of collaborators to keep track of, visualize, and digitally archive any type of sample- or stratigraphic-based data produced from drill holes, dredges, measured stratigraphic sections, the field, or the laboratory. The challenge is to build a linked system that provides users a library of research data as well as tools to input, discover, access, integrate, manipulate, analyze, and model interdisciplinary data - all without corrupting the original data and insuring that the data are attributed to the originator at all times. Science runs on data, but despite the importance of data (legacy or otherwise), there are currently few convenient mechanisms that enable users to easily input their data into databases. While some efforts such as GfG databases, PetDB and SedDB have worked hard to compile such data, only users' active participation can

Inventory of U.S.-led International Activities on Building Energy Efficiency Initial Findings

Energy Technology Data Exchange (ETDEWEB)

Delgado, Alison; Evans, Meredydd

2010-04-01

Several U.S. Government agencies promote energy efficiency in buildings internationally. The types and scope of activities vary by agency. Those with the largest role include the U.S. Agency for International Development (USAID), the U.S. Department of State and the Environmental Protection Agency (EPA). Both USAID and the Department of State have a substantial presence overseas, which may present some complementarities with the Department of Energy’s efforts to reach out to other countries. Generally speaking, USAID focuses on capacity building and policy issues; the Department of State focuses on broad diplomatic efforts and some targeted grants in support of these efforts, and EPA has more targeted roles linked to ENERGY STAR appliances and a few other activities. Several additional agencies are also involved in trade-related efforts to promote energy efficiency in buildings. These include the Department of Commerce, the Export-Import Bank, the Overseas Private Investment Corporation and the Trade and Development Agency (TDA). This initial synthesis report is designed to summarize broad trends and activities relating to international cooperation on energy efficiency in buildings, which can help the U.S. Department of Energy (DOE) in developing its own strategy in this area. The Pacific Northwest National Laboratory will develop a more complete synthesis report later in 2010 as it populates a database on international projects on building energy efficiency.

Building concepts against airplane crash

International Nuclear Information System (INIS)

Henkel, F.O.; Woelfel, H.

1984-01-01

In Germany safety related buildings of nuclear facilities as well as their equipment are to be designed against airplane crash. While the safety of the structure itself can always be guaranteed by structural means, the induced vibrations may cause severe problems for the equipment. Considerable effort was expended in recent years to comprehend the load case airplane crash in a more exact manner and to evaluate reasonable floor response spectra. Besides this analytical effort, investigations are cited to minimize the induced vibrations by new structural concepts. The present paper gives a survey concerning the development of structural concepts, culminating in the double shell structures that are state of the art today. Then the idea of spring supports, as it is known for the aseismic foundation of buildings, is further developed to a new spring concept which reduces the induced vibrations in an optimum way in the load case airplane crash and which additionally isolates earthquake vibrations. (orig.)

Integrating Building Information Modeling and Green Building Certification: The BIM-LEED Application Model Development

Science.gov (United States)

Wu, Wei

2010-01-01

Building information modeling (BIM) and green building are currently two major trends in the architecture, engineering and construction (AEC) industry. This research recognizes the market demand for better solutions to achieve green building certification such as LEED in the United States. It proposes a new strategy based on the integration of BIM…

Building opportunities in the U.S. for PV (PV:BONUS): A progress report

International Nuclear Information System (INIS)

Taylor, R.W.

1994-01-01

Five contract teams are developing photovoltaic (PV) products that will have a significant impact on building-integrated PV systems. The product lines that these teams are pursuing include roofing materials, building facade materials, PV integrated into modular homes, ac-PV modules, and utility-dispatchable PV systems. The objective of these efforts is to develop product and market opportunities that can provide for the introduction of PV into the buildings market sector at higher allowable installed systems costs than conventional ground- or roof-mounted systems. Each of the teams has a unique approach, and synergistic opportunities among teams are beginning to emerge. This paper reviews the product and market development efforts of these teams and describes the links between the product efforts and parallel analytical work to develop PV as a demand-side management option

The effects of window alternatives on energy efficiency and building economy in high-rise residential buildings in moderate to humid climates

International Nuclear Information System (INIS)

Yaşar, Yalçın; Kalfa, Sibel Maçka

2012-01-01

Highlights: ► We investigated energy and economy efficiency of window alternatives in Trabzon. ► Energy consumptions of eight window alternatives were simulated and discussed. ► Window alternatives’s life cycle costs were calculated and compared. ► We suggested appropriate energy and economy efficient window alternatives. ► The study defines useful guidelines to select appropriate window alternatives. - Abstract: Currently, focused efforts are being made to determine the influence of windows on the energy consumption and economy of high-rise buildings. Certain window designs and appropriate glazing systems reduce building energy consumption for heating and cooling and contribute to building economy. This paper addresses double-glazed window units that are composed of tinted glass; clear reflective glass; low emissivity (low-e) glass; and smart glass (one surface consists of a high-performance, heat-reflective glass, and other surface has a low-emissivity coated). These materials reduce the heating and cooling loads of buildings by providing solar control and heat conservation. The aim of this study was to investigate the effects of these alternative units, rather than readily available double-glazed units, in two types of flats. The flats have the same construction and operating system, but they have different plan types with regard to building energy consumption and building economy as it relates to life cycle cost analysis. For this study, we selected buildings in Trabzon, in Climate Region II of Turkey, due to its moderate-humid climate. F- and C-type high-rise residential blocks, with flats composed of two to three bedrooms, constructed by the Republic of Turkey’s Prime Ministry Housing Development Administration of Turkey (TOKİ) are used as models for the simulation. The flat plans in these blocks are modeled using DesignBuilder v.1.8 energy simulation software. The simulation results show that smart-glazed units and those with low emissivity

Methodology to Assess No Touch Audit Software Using Simulated Building Utility Data

Energy Technology Data Exchange (ETDEWEB)

Cheung, Howard [Purdue Univ., West Lafayette, IN (United States); Braun, James E. [Purdue Univ., West Lafayette, IN (United States); Langner, M. Rois [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-10-01

This report describes a methodology developed for assessing the performance of no touch building audit tools and presents results for an available tool. Building audits are conducted in many commercial buildings to reduce building energy costs and improve building operation. Because the audits typically require significant input obtained by building engineers, they are usually only affordable for larger commercial building owners. In an effort to help small building and business owners gain the benefits of an audit at a lower cost, no touch building audit tools have been developed to remotely analyze a building's energy consumption.

Building smart cities analytics, ICT, and design thinking

CERN Document Server

Stimmel, Carol L

2015-01-01

The term "smart city" defines the new urban environment, one that is designed for performance through information and communication technologies. Given that the majority of people across the world will live in urban environments within the next few decades, it's not surprising that massive effort and investment is being placed into efforts to develop strategies and plans for achieving "smart" urban growth. Building Smart Cities: Analytics, ICT, and Design Thinking explains the technology and a methodology known as design thinking for building smart cities. Information and communications technologies form the backbone of smart cities. A comprehensive and robust data analytics program enables the right choices to be made in building these cities. Design thinking helps to create smart cities that are both livable and able to evolve. This book examines all of these components in the context of smart city development and shows how to use them in an integrated manner. Using the principles of design thinking to refr...

The Effort Paradox: Effort Is Both Costly and Valued.

Science.gov (United States)

Inzlicht, Michael; Shenhav, Amitai; Olivola, Christopher Y

2018-04-01

According to prominent models in cognitive psychology, neuroscience, and economics, effort (be it physical or mental) is costly: when given a choice, humans and non-human animals alike tend to avoid effort. Here, we suggest that the opposite is also true and review extensive evidence that effort can also add value. Not only can the same outcomes be more rewarding if we apply more (not less) effort, sometimes we select options precisely because they require effort. Given the increasing recognition of effort's role in motivation, cognitive control, and value-based decision-making, considering this neglected side of effort will not only improve formal computational models, but also provide clues about how to promote sustained mental effort across time. Copyright © 2018 Elsevier Ltd. All rights reserved.

Calculation procedure of temperature carditions of building-up and high frequency current brazing of articles of complex shape

International Nuclear Information System (INIS)

Ivnitskij, B.Ya.

1984-01-01

A technique of calculating the temperature regime of building-up and high frequency current brazing of articles of complex shape is suggested. The technique consists in division of complex detail into several simple components. Heat balances equation is compiled for each of them taking into account the heat exchange with other elements. It is possible to determine optimum regimes for heating and cooling rather efficiently using a computer

Workplace High Tech Spurs Retraining Efforts.

Science.gov (United States)

Davis, Dwight B.

1984-01-01

Discusses who should provide training for displaced workers who need new skills. Areas examined include: (1) the need for retraining; (2) current corporate efforts; (3) agreements in the automotive industry; (4) job quality; (5) the federal government's role; and (6) federal legislation related to the problem. (JN)

The Implementation of Police Reform in Bosnia and Herzegovina: Analysing UN and EU Efforts

Directory of Open Access Journals (Sweden)

Amelia Padurariu

2014-01-01

Full Text Available This article analyses the role of the main international actors involved in the implementation of police reform in post-conflict Bosnia and Herzegovina, notably that of the UN and the EU. Despite considerable efforts and resources deployed over 17 years, the implementation of police reform remains an ‘unfinished business’ that demonstrates the slow pace of implementing rule of law reforms in Bosnia’s post-conflict setting, yet, in the long-term, remains vital for Bosnia’s stability and post-conflict reconstruction process. Starting with a presentation of the status of the police before and after the conflict, UN reforms (1995–2002 are first discussed in order to set the stage for an analysis of the role of the EU in the implementation of police reform. Here, particular emphasis is placed on the institution-building actions of the EU police mission in Bosnia and Herzegovina deployed on the ground for almost a decade (2003-June 2012. The article concludes with an overall assessment of UN and EU efforts in post-conflict Bosnia and Herzegovina, including the remaining challenges encountered by the EU on the ground, as the current leader to police reform implementation efforts. More generally, the article highlights that for police reform to succeed in the long-term, from 2012-onwards, the EU should pay particular attention to the political level, where most of the stumbling blocks for the implementation of police reform lie.

The Index of Asia-Pacific Regional Integration Effort

Directory of Open Access Journals (Sweden)

Victor Yifan Ye

2016-06-01

Full Text Available The Asia-Pacific region is not typically seen as one geographic or socio-economic space. Yet, 58 regional economies occupying the space of 28 million square kilometers from Turkey in the West, Russian Federation in the North, French Polynesia in the East and New Zealand in the South belong to the Economic and Social Commission of Asia and the Pacific (ESCAP. This commission provides a forum for member states that "promotes regional cooperation and collective action, assisting countries in building and sustaining shared economic growth and social equity". In 2013, ESCAP's members adopted the Bangkok Declaration to enhance efforts towards deeper regional economic integration. Yet this document neither proposes a concrete modality or modalities of achieving deeper integration, nor provides a sense of distance of individual countries to a "perceived" integrated Asia-Pacific.This paper aims to comprehensively quantify recent integration efforts of economies in the Asia-Pacific region. We provide an "index of integration effort" based on twelve metrics that measure the relative distance of a given economy to the region as an economic entity. Generally, we find that while the region has trended towards becoming integrated in general, both the level of integration and integration effort are inconsistent among Asia-Pacific economies. We discuss potential applications and extensions of the index in developing our perspective of the region's economic and social dynamics.

High-performance commercial building systems

Energy Technology Data Exchange (ETDEWEB)

Selkowitz, Stephen

2003-10-01

This report summarizes key technical accomplishments resulting from the three year PIER-funded R&D program, ''High Performance Commercial Building Systems'' (HPCBS). The program targets the commercial building sector in California, an end-use sector that accounts for about one-third of all California electricity consumption and an even larger fraction of peak demand, at a cost of over $10B/year. Commercial buildings also have a major impact on occupant health, comfort and productivity. Building design and operations practices that influence energy use are deeply engrained in a fragmented, risk-averse industry that is slow to change. Although California's aggressive standards efforts have resulted in new buildings designed to use less energy than those constructed 20 years ago, the actual savings realized are still well below technical and economic potentials. The broad goal of this program is to develop and deploy a set of energy-saving technologies, strategies, and techniques, and improve processes for designing, commissioning, and operating commercial buildings, while improving health, comfort, and performance of occupants, all in a manner consistent with sound economic investment practices. Results are to be broadly applicable to the commercial sector for different building sizes and types, e.g. offices and schools, for different classes of ownership, both public and private, and for owner-occupied as well as speculative buildings. The program aims to facilitate significant electricity use savings in the California commercial sector by 2015, while assuring that these savings are affordable and promote high quality indoor environments. The five linked technical program elements contain 14 projects with 41 distinct R&D tasks. Collectively they form a comprehensive Research, Development, and Demonstration (RD&D) program with the potential to capture large savings in the commercial building sector, providing significant economic benefits to

The present gravitational wave detection effort

International Nuclear Information System (INIS)

Riles, Keith

2010-01-01

Gravitational radiation offers a new non-electromagnetic window through which to observe the universe. The LIGO and Virgo Collaborations have completed a first joint data run with unprecedented sensitivities to gravitational waves. Results from searches in the data for a variety of astrophysical sources are presented. A second joint data run with improved detector sensitivities is underway, and soon major upgrades will be carried out to build Advanced LIGO and Advanced Virgo with expected improvements in event rates of more than 1000. In parallel there is a vigorous effort in the radio pulsar community to detect nHz gravitational waves via the timing residuals in an array of pulsars at different locations in the sky.

Brief Discussion on Green Building Materials

International Nuclear Information System (INIS)

Cai, Jia-wei; Sun, Jian

2014-01-01

With more and more emphasizes on the environment and resources, the concept of green buildings has been widely accepted. Building materials are vectors of architectures, only if green building materials and related technical means are used, can we construct green buildings to achieve the purpose of energy conservation and environmental protection. This paper introduces the relationship between green building materials and green buildings, the current situation of green building materials in China, as well as the measures to accelerate the development of green building materials

Building brands without mass media.

Science.gov (United States)

Joachimsthaler, E; Aaker, D A

1997-01-01

Costs, market fragmentation, and new media channels that let customers bypass advertisements seem to be in league against the old ways of marketing. Relying on mass media campaigns to build strong brands may be a thing of the past. Several companies in Europe, making a virtue of necessity, have come up with alternative brand-building approaches and are blazing a trail in the post-mass-media age. In England, Nestlé's Buitoni brand grew through programs that taught the English how to cook Italian food. The Body Shop garnered loyalty with its support of environmental and social causes. Cadbury funded a theme park tied to its history in the chocolate business. Häagen-Dazs opened posh ice-cream parlors and got itself featured by name on the menus of fine restaurants. Hugo Boss and Swatch backed athletic or cultural events that became associated with their brands. The various campaigns shared characteristics that could serve as guidelines for any company hoping to build a successful brand: senior managers were closely involved with brand-building efforts; the companies recognized the importance of clarifying their core brand identity; and they made sure that all their efforts to gain visibility were tied to that core identity. Studying the methods of companies outside one's own industry and country can be instructive for managers. Pilot testing and the use of a single and continuous measure of brand equity also help managers get the most out of novel approaches in their ever more competitive world.

Support vector machine in prediction of building energy demand using pseudo dynamic approach

NARCIS (Netherlands)

Paudel, S.; Nguyen, H.P.; Kling, W.L.; Elmitri, Mohamed; Lacarriere, B.; Corre, le O.

2015-01-01

Building’s energy consumption prediction is a major concern in the recent years and many efforts have been achieved in order to improve the energy management of buildings. In particular, the prediction of energy consumption in building is essential for the energy operator to build an optimal

Seismic retrofitting of Apsara reactor building

International Nuclear Information System (INIS)

Reddy, G.R.; Parulekar, Y.M.; Sharma, A.; Rao, K.N.; Narasimhan, Rajiv; Srinivas, K.; Basha, S.M.; Thomas, V.S.; Soma Kumar, K.

2006-01-01

Seismic analysis of Apsara Reactor building was carried out and was found not meeting the current seismic requirements. Due to the building not qualifying for seismic loads, a retrofit scheme using elasto-plastic dampers is proposed. Following activities have been performed in this direction: Carried out detailed seismic analysis of Apsara reactor building structure incorporating proposed seismic retrofit. Demonstrating the capability of the retrofitted structure to with stand the earth quake level for Trombay site as per the current standards by analysis and by model studies. Implementation of seismic retrofit program. This paper presents the details of above aspects related to Seismic analysis and retrofitting of Apsara reactor building. (author)

Local health rules and building regulations: a survey on local hygiene and building regulations in Italian municipalities.

Science.gov (United States)

Gola, Marco; Signorelli, Carlo; Buffoli, Maddalena; Rebecchi, Andrea; Capolongo, Stefano

2017-01-01

WHO has highlighted the need to strengthen the relationship between health and built environment factors, such as inappropriate housing conditions. Local Health Rules (LHRs) and Building Regulations (BRs) are tools which provide safety and building hygiene in construction practices. Currently the Italian Government is considering to establish a National Building Regulation and, related to the following purpose, this paper presents a survey on the status of adoption and updating of LHRs and BRs in Italian municipalities. The current Italian state of LHRs, BRs and Municipal Development Plans (MDPs) have been examined by a survey considering a sample of about 550 cities, with different demo graphic and geographic features, starting from the previous research work by Signorelli et al. (1999). The analysis underlines a serious shortage of updated LHRs, especially in small and medium-sized municipalities whereas BRs and MDPs are widespread. Only 30% of them are previously approved and validated by Local Health Authorities. Starting from a survey, the present scenario of Building Regulations requires the introduction of further performance guidelines instead of normative ones and, therefore, the current actions to give rise to a National Building Regulation could be integrated by building hygiene contents of LHRs.

Disseminating online tools for building capacity among community practitioners.

Science.gov (United States)

Holt, Christina M; Fawcett, Stephen B; Schultz, Jerry A; Jones, Jami A; Berkowitz, Bill; Wolff, Thomas J; Francisco, Vincent T; Rabinowitz, Philip W

2013-01-01

To prepare the workforce for building healthier communities, we need to assure capabilities of a diverse and geographically distributed community of practitioners. Although the Internet is used extensively to disseminate practice information, less is known about the relative impact of various strategies for promoting its use. This empirical case study examines implementation of dissemination strategies and their association with increased user sessions in the online Community Tool Box (CTB), a widely used resource for community building. Dissemination activities included social media efforts, eNewsletters, search engine optimization efforts, partnering with other Web sites, and implementing a global Out of the Box Prize. Results suggest that increased user sessions were associated with search optimization and "mashups" delivering CTB content through partners' Web sites. The report concludes with a discussion of challenges and opportunities in promoting widespread use of capacity-building tools among those working to improve their communities.

Analysis Efforts Supporting NSTX Upgrades

International Nuclear Information System (INIS)

Zhang, H.; Titus, P.; Rogoff, P.; Zolfaghari, A.; Mangra, D.; Smith, M.

2010-01-01

The National Spherical Torus Experiment (NSTX) is a low aspect ratio, spherical torus (ST) configuration device which is located at Princeton Plasma Physics Laboratory (PPPL) This device is presently being updated to enhance its physics by doubling the TF field to 1 Tesla and increasing the plasma current to 2 Mega-amperes. The upgrades include a replacement of the centerstack and addition of a second neutral beam. The upgrade analyses have two missions. The first is to support design of new components, principally the centerstack, the second is to qualify existing NSTX components for higher loads, which will increase by a factor of four. Cost efficiency was a design goal for new equipment qualification, and reanalysis of the existing components. Showing that older components can sustain the increased loads has been a challenging effort in which designs had to be developed that would limit loading on weaker components, and would minimize the extent of modifications needed. Two areas representing this effort have been chosen to describe in more details: analysis of the current distribution in the new TF inner legs, and, second, analysis of the out-of-plane support of the existing TF outer legs.

The Galileo Teacher Training Program Global Efforts

Science.gov (United States)

Doran, R.; Pennypacker, C.; Ferlet, R.

2012-08-01

The Galileo Teacher Training Program (GTTP) successfully named representatives in nearly 100 nations in 2009, the International Year of Astronomy (IYA2009). The challenge had just begun. The steps ahead are how to reach educators that might benefit from our program and how to help build a more fair and science literate society, a society in which good tools and resources for science education are not the privilege of a few. From 2010 on our efforts have been to strengthen the newly formed network and learn how to equally help educators and students around the globe. New partnerships with other strong programs and institutions are being formed, sponsorship schemes being outlined, new tools and resources being publicized, and on-site and video conference training conducted all over the world. Efforts to officially accredit a GTTP curriculum are on the march and a stronger certification process being outlined. New science topics are being integrated in our effort and we now seek to discuss the path ahead with experts in this field and the community of users, opening the network to all corners of our beautiful blue dot. The main aim of this article is to open the discussion regarding the urgent issue of how to reawaken student interest in science, how to solve the gender inequality in science careers, and how to reach the underprivileged students and open to them the same possibilities. Efforts are in strengthening the newly formed network and learning how to equally help educators and students around the globe.

Critical Community Building: Beyond Belonging

Science.gov (United States)

Bettez, Silvia Cristina

2011-01-01

In this paper, the author talks about community building and the power of active listening. Active listening is a particular kind of listening that requires conscious effort; it is a type of listening that some rarely practice and sometimes is virtually absent from classroom interactions. Thus active listening itself may be deceptively simple…

Understanding and building upon effort to return to work for people with long-term disability and job loss.

Science.gov (United States)

Saunders, S L; MacEachen, E; Nedelec, B

2015-01-01

Effort is a concept that underlies programs assisting people with work disability to re-enter the labour force. During re-entry, attention is paid to the effort invested by the worker with an injury. However, for those with chronic work disability, the motivation to return to work (RTW) may be questioned by benefit service providers and healthcare professionals. The objective of this paper is to describe the efforts made by people with long term work-disability to regain a foothold on the labour market. This phenomenological study explored the meaning of work for people with long-term work disability and job loss. Twenty-seven interviews were conducted with nine participants. A thematic analysis was completed of the collected data. A key finding of this study is the variety and degree of effort exerted by participants to regain employment, despite time away from the workplace and system barriers. Effort was exerted to retain pre-accident employment; to obtain new work following job loss; and, to remain in a new job. This study suggests that if the RTW effort of people with long-term work disability is not fully acknowledged or supported, this population will remain unemployed where their strengths as competent, experienced workers will continue to be wasted.

Building an International Collaboration for GeoInformatics

Science.gov (United States)

Snyder, W. S.; Lehnert, K.; Klump, J.

2005-12-01

Geoinformatics (cyberinfrastructure for the geosciences) is being developed as a linked system of sites that provide to the Earth science community a library of research data research-grade tools to manipulate, mine, analyze and model interdisciplinary data, and mechanisms to provide the necessary computational resources for these activities. Our science is global in scope and hence, geoinformatics (GI) must be an international effort. How do we build this international GI? What are the main challenges presented by the political, cultural, organizational, and technical diversity of the global science community that we need to address to achieve a truly global cyberinfrastructure for the Geosciences? GI needs to be developed in an internet-like fashion establishing connections among independent globally distributed sites (`nodes') that will share, link, and integrate their data holdings and services. Independence of the GI pieces with respect to goals, scope, and approaches is critical to sustain commitment from people to build a GI node for which they feel ownership and get credit. This should not be fought by funding agencies - and certainly not by state and federal agencies. Communication, coordination, and collaboration are the core efforts to build the connections, but incentives and resources are required to advance and support them. Part of the coordination effort is development and maintenance of standards. Who should set these standards and govern their modification? Do we need an official international body to do so, and should this be a "governing body" or an "advisory body"? What role should international commissions and bodies such as CODATA/ICSU or IUGS-CGI, international societies and unions, the national geological surveys and other federal agencies play? Guidance from the science community is key to construct a system that geo-researchers will want to use, and that meets their needs. Only when the community endorses GI as a fundamental platform to

WHE-PAGER Project: A new initiative in estimating global building inventory and its seismic vulnerability

Science.gov (United States)

Porter, K.A.; Jaiswal, K.S.; Wald, D.J.; Greene, M.; Comartin, Craig

2008-01-01

The U.S. Geological Survey’s Prompt Assessment of Global Earthquake’s Response (PAGER) Project and the Earthquake Engineering Research Institute’s World Housing Encyclopedia (WHE) are creating a global database of building stocks and their earthquake vulnerability. The WHE already represents a growing, community-developed public database of global housing and its detailed structural characteristics. It currently contains more than 135 reports on particular housing types in 40 countries. The WHE-PAGER effort extends the WHE in several ways: (1) by addressing non-residential construction; (2) by quantifying the prevalence of each building type in both rural and urban areas; (3) by addressing day and night occupancy patterns, (4) by adding quantitative vulnerability estimates from judgment or statistical observation; and (5) by analytically deriving alternative vulnerability estimates using in part laboratory testing.

An integrated building demolition and waste planning model for the Fernald Site

International Nuclear Information System (INIS)

Hampshire, L.H.; Clark, T.R.; Frost, M.L.; Reising, J.W.

1995-01-01

The Fernald DOE site will begin full-scale remediation of buildings under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) during the 1995 fiscal year pursuant to a signed Record of Decision. This effort is currently estimated to cost $350 million and span a minimum duration of 8 years, if funding is not a constraint. The identification of the most viable sequence and schedule for the effort involved the development of an integrated planning model and the commissioning of a sitewide planning team. The resulting work product represents the best combination of assumptions and calculations possible at this time and provides information necessary for compliance with the CERCLA Remedial Design documentation requirements for the over 230 component structures governed by the decision. Sequence and integrated schedule development for the decontamination and dismantlement (D ampersand D) of Fernald structures has involved evaluation of current and future utilization of structures, availability of waste storage and staging space, the needs and impacts of other on-going Fernald projects, Resource Conservation and Recovery Act (RCRA) waste management and remediation projects, the layout of site utilities, site hydrology, and the potential sizing, location, and construction rates for an on-property disposal cell

Thermal Comfort and Ventilation Criteria for low Energy Residential Buildings in Building Codes

DEFF Research Database (Denmark)

Cao, Guangyu; Kurnitski, Jarek; Awbi, Hazim

2012-01-01

of the indoor air quality in such buildings. Currently, there are no global guidelines for specifying the indoor thermal environment in such low-energy buildings. The objective of this paper is to analyse the classification of indoor thermal comfort levels and recommended ventilation rates for different low...

Building Hotel Revenues through Tourism

Directory of Open Access Journals (Sweden)

John D. Murtha, CHA

2013-01-01

Full Text Available When evaluating ways to maximize revenues, hotel executives should consider supporting the efforts of local destination marketing organizations. Helping to build and sustain travel to a city or region can benefit individual hotels, by combining resources and energy on marketing tactics that would otherwise be too ambitious or costly for a single property to pursue on its own. The market in Boston and adjacent Cambridge, Massachusetts offers an interesting case study for understanding the interaction of hotels and destination marketing organizations. The author includes action steps for hoteliers who would like to become more involved in such efforts.

Buildings-to-Grid Technical Opportunities: From the Buildings Perspective

Energy Technology Data Exchange (ETDEWEB)

Kiliccote, Sila [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2014-03-28

This paper describes technologies and systems needed to transform buildings from the current state of siloed resources into transparent, reliable resources that participate in and benefit from an integrated "transactive energy" system.

North European Understanding of Zero Energy/Emission Buildings

DEFF Research Database (Denmark)

Marszal, Anna Joanna; Bourrelle, J. S.; Nieminen, J.

2010-01-01

countries are still to adopt a national definition for these types of buildings. This results often in more than one understanding of ZEBs in each country. This study provides a concise source of information on the north European understanding of zero energy/emission buildings. It puts forward a number......The worldwide CO2 emission mitigation efforts, the growing energy resource shortage and the fact that buildings are responsible for a large share of the world’s primary energy use drives research towards new building concepts, in particular Zero Energy/Emission Buildings (ZEBs). Unfortunately...... may observe a correlation between the zero energy/emission building approach adopted by a country and this particular country’s utility grid characteristics. Moreover, it is to be noted that the ZEB concept is not well defined at the national level in northern Europe and that all of the participating...

Durability of building joint sealants

Science.gov (United States)

Christopher C. White; Kar Tean Tan; Donald L. Hunston; R. Sam Williams

2009-01-01

Predicting the service life of building joint sealants exposed to service environments in less than real time has been a need of the sealant community for many decades. Despite extensive research efforts to design laboratory accelerated tests to duplicate the failure modes occurring in field exposures, little success has been achieved using conventional durability...

Do Effort and Reward at Work Predict Changes in Cognitive Function? First Longitudinal Results from the Representative German Socio-Economic Panel

Science.gov (United States)

Riedel, Natalie; Siegrist, Johannes; Wege, Natalia; Loerbroks, Adrian; Angerer, Peter; Li, Jian

2017-01-01

It has been suggested that work characteristics, such as mental demands, job control, and occupational complexity, are prospectively related to cognitive function. However, current evidence on links between psychosocial working conditions and cognitive change over time is inconsistent. In this study, we applied the effort–reward imbalance model that allows to build on previous research on mental demands and to introduce reward-based learning as a principle with beneficial effect on cognitive function. We aimed to investigate whether high effort, high reward, and low over-commitment in 2006 were associated with positive changes in cognitive function in terms of perceptual speed and word fluency (2006–2012), and whether the co-manifestation of high effort and high reward would yield the strongest association. To this end, we used data on 1031 employees who participated in a large and representative study. Multivariate linear regression analyses supported our main hypotheses (separate and combined effects of effort and reward), particularly on changes in perceptual speed, whereas the effects of over-commitment did not reach the level of statistical significance. Our findings extend available knowledge by examining the course of cognitive function over time. If corroborated by further evidence, organization-based measures in the workplace can enrich efforts towards preventing cognitive decline in ageing workforces. PMID:29140258

Do Effort and Reward at Work Predict Changes in Cognitive Function? First Longitudinal Results from the Representative German Socio-Economic Panel

Directory of Open Access Journals (Sweden)

Natalie Riedel

2017-11-01

Full Text Available It has been suggested that work characteristics, such as mental demands, job control, and occupational complexity, are prospectively related to cognitive function. However, current evidence on links between psychosocial working conditions and cognitive change over time is inconsistent. In this study, we applied the effort–reward imbalance model that allows to build on previous research on mental demands and to introduce reward-based learning as a principle with beneficial effect on cognitive function. We aimed to investigate whether high effort, high reward, and low over-commitment in 2006 were associated with positive changes in cognitive function in terms of perceptual speed and word fluency (2006–2012, and whether the co-manifestation of high effort and high reward would yield the strongest association. To this end, we used data on 1031 employees who participated in a large and representative study. Multivariate linear regression analyses supported our main hypotheses (separate and combined effects of effort and reward, particularly on changes in perceptual speed, whereas the effects of over-commitment did not reach the level of statistical significance. Our findings extend available knowledge by examining the course of cognitive function over time. If corroborated by further evidence, organization-based measures in the workplace can enrich efforts towards preventing cognitive decline in ageing workforces.

Building technolgies program. 1994 annual report

Energy Technology Data Exchange (ETDEWEB)

Selkowitz, S.E.

1995-04-01

The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. We have focused our past efforts on two major building systems, windows and lighting, and on the simulation tools needed by researchers and designers to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. In addition, we are now taking more of an integrated systems and life cycle perspective to create cost-effective solutions for more energy efficient, comfortable, and productive work and living environments. More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity-factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout every space in a building, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Window and lighting systems are thus essential components of any comprehensive building science program.

Balancing BEC and IAQ in civil buildings during rapid urbanization in China: Regulation, interplay and collaboration

International Nuclear Information System (INIS)

Zhang Jiefeng; Bai Zhipeng; Chang, Victor W.C.; Ding Xiao

2011-01-01

Energy consumption by building sector becomes more and more important in a rapid growing economy like China. Tremendous efforts have been made on building energy conservation (BEC) to comply with the national energy-saving policies over the last three decades. At the same time, with the increasing awareness of the importance of indoor air quality (IAQ), Ministry of Health (MoH) also initiates the related standards to fulfill the needs. BEC and IAQ are two main concerns in the current building management practice. This paper makes an attempt, based on the regulations and standards in chronological order, to elaborate the followings: (1) the development history of BEC and IAQ management in civil buildings in China, (2) the interplay and sometimes seeming conflicts of BEC and IAQ management in the real practice, (3) the importance of proper communications between related authorities in setting up cross-linked regulations to ensure the success of better building managements. - Highlights: → The development of BEC and IAQ management follow similar timelines. → Misconducts of building management practice may lead to compromised IAQ. → Ventilation design and thermal insulation have impacts on both BEC and IAQ. → Proper cross-agency communications essentially promote the BEC and IAQ management.

Building energy governance in Shanghai

Science.gov (United States)

Kung, YiHsiu Michelle

With Asia's surging economies and urbanization, the region is adding to its built environment at an unprecedented rate, especially those population centers in China and India. With numerous existing buildings, plus a new building boom, construction in these major Asian cities has caused momentous sustainability challenges. This dissertation focuses on China's leading city, Shanghai, to explore and assess its existing commercial building energy policies and practices. Research estimates that Shanghai's commercial buildings might become a key challenge with regard to energy use and CO2 emissions as compared to other major Asian cities. Relevant building energy policy instruments at national and local levels for commercial buildings are reviewed. In addition, two benchmarks are established to further assess building energy policies in Shanghai. The first benchmark is based on the synthesis of relevant criteria and policy instruments as recommended by professional organizations, while the second practical benchmark is drawn from an analysis of three global cities: New York, London and Tokyo. Moreover, two large-scale commercial building sites - Shanghai IKEA and Plaza 66 - are selected for investigation and assessment of their efforts on building energy saving measures. Detailed building energy savings, CO2 reductions, and management cost reductions based on data availability and calculations are presented with the co-benefits approach. The research additionally analyzes different interventions and factors that facilitate or constrain the implementation process of building energy saving measures in each case. Furthermore, a multi-scale analytical framework is employed to investigate relevant stakeholders that shape Shanghai's commercial building energy governance. Research findings and policy recommendations are offered at the close of this dissertation. Findings and policy recommendations are intended to facilitate commercial building energy governance in Shanghai and

Trust and Reciprocity: Are Effort and Money Equivalent?

Science.gov (United States)

Vilares, Iris; Dam, Gregory; Kording, Konrad

2011-01-01

Trust and reciprocity facilitate cooperation and are relevant to virtually all human interactions. They are typically studied using trust games: one subject gives (entrusts) money to another subject, which may return some of the proceeds (reciprocate). Currently, however, it is unclear whether trust and reciprocity in monetary transactions are similar in other settings, such as physical effort. Trust and reciprocity of physical effort are important as many everyday decisions imply an exchange of physical effort, and such exchange is central to labor relations. Here we studied a trust game based on physical effort and compared the results with those of a computationally equivalent monetary trust game. We found no significant difference between effort and money conditions in both the amount trusted and the quantity reciprocated. Moreover, there is a high positive correlation in subjects' behavior across conditions. This suggests that trust and reciprocity may be character traits: subjects that are trustful/trustworthy in monetary settings behave similarly during exchanges of physical effort. Our results validate the use of trust games to study exchanges in physical effort and to characterize inter-subject differences in trust and reciprocity, and also suggest a new behavioral paradigm to study these differences. PMID:21364931

Energy-efficient buildings are environmentally friendly, architecturally attractive and economically compelling

International Nuclear Information System (INIS)

Wafa, Latifa Mohamed

2006-01-01

Standard building construction is wasteful, toxic, and is destroying the environment. It produced buildings that operate independently of its natural surrounding and depended heavily on mechanical systems that run with fossil fuel to create comfortable indoor environment. These buildings caused a wide range of health and environmental problems. The concern about the consequences of standard building construction have prompted countless experiments and design improvements to make built environment more energy efficient, less reliant on potentially limited fossil fuels and more reliant on renewable energy resources. The application of energy efficient technologies can make significant contribution to meeting the building and construction sector's energy demand, while at the same time providing better built environment, offering more comfortable living and working conditions for the users, cleaner and healthier in-outdoor environment, and cost no more to build. The proposes of the paper are to: 1-Promote the implementation of Energy-Efficient buildings through vigorous efforts, by engaging government agencies, design professions, engineers, and construction industry in the task of radically improving the performance of our buildings, neighborhoods, and cities. 2-Educate the general public (the consumers) that Energy-Efficient Building is good for their well-being, to their pocket and to the environment.3-Demonstrate that Energy-efficient Building are with highest standards of architecture design, the highest quality living and working environment and within a reasonable budget. The paper describes the technological options available for dealing sensibly with energy and focuses on the important areas of new building constructions and building refurbishment together with its specific energy requirements. The approach presented in this paper is just one of many methods of planning energy efficient buildings.This paper is part of the effort to promote Energy

Performance of Buildings in the 2009 Western Sumatra Earthquake

Science.gov (United States)

Deierlein, G.; Hart, T.; Alexander, N.; Hausler, E.; Henderson, S.; Wood, K.; Cedillos, V.; Wijanto, S.; Cabrera, C.; Rudianto, S.

2009-12-01

The M7.6 earthquake of 30 September 2009 in Western Sumatra, Indonesia caused significant damage and collapse to hundreds of buildings and the deaths of 1,117 people. In Padang City, with a population of about 900,000 people, building collapse was the primary cause of deaths and serious injuries (313 deaths and 431 serious injuries). The predominant building construction types in Padang are concrete moment frames with brick infill and masonry bearing wall systems. Concrete frames are common in multistory commercial retail buildings, offices, schools, and hotels; and masonry bearing wall systems are primarily used in low-rise (usually single story) residential and school buildings. In general, buildings that collapsed did not conform to modern seismic engineering practices that are required by the current Indonesian building code and would be expected in regions of moderate to high seismicity. While collapse of multi-story concrete buildings was more prevalent in older buildings (more than 10 years old), there were several newer buildings that collapsed. Primary deficiencies identified in collapsed or severely damaged buildings included: (a) soft or weak stories that failed in either by sidesway mechanisms or shear failures followed by loss of axial capacity of columns, (b) lack of ductile reinforcing bar detailing in concrete beams, columns, and beam-column joints, (c) poor quality concrete and mortar materials and workmanship, (d) vulnerable building configurations and designs with incomplete or deficient load paths, and (e) out-of-plane wall failures in unreinforced (or marginally reinforced) masonry. While these deficiencies may be expected in older buildings, damage and collapse to some modern (or recently rennovated buildings) indicates a lack of enforcement of building code provisions for design and construction quality assurance. Many new buildings whose structural systems were undamaged were closed due to extensive earthquake damage to brick infill walls

Municipalities as promoters of energy efficient buildings

DEFF Research Database (Denmark)

Quitzau, Maj-Britt; Hoffmann, Birgitte; Elle, Morten

Planning authorities generally experience difficulties in disseminating energy efficient technologies in the built environment. Although planning authorities formulate objectives to promote energy efficient build-ings, these objectives often turn out to be declarations of intent, since the author......Planning authorities generally experience difficulties in disseminating energy efficient technologies in the built environment. Although planning authorities formulate objectives to promote energy efficient build-ings, these objectives often turn out to be declarations of intent, since...... with practitioners in the building sector at the local level. The aim of this report is to look into municipal efforts to promote energy efficient buildings to learn from their experiences: What types of challenges are municipalities facing, when attempting to disseminate energy efficient technologies in local...... building projects through municipal planning practices, and how do they cope with these challenges? The report is based on an in-depth study of proactive planning practices performed by municipal partners in the Class 1 project and a series of experiences, strategies and instru-ments are identified...

The Threat of Common Method Variance Bias to Theory Building

Science.gov (United States)

Reio, Thomas G., Jr.

2010-01-01

The need for more theory building scholarship remains one of the pressing issues in the field of HRD. Researchers can employ quantitative, qualitative, and/or mixed methods to support vital theory-building efforts, understanding however that each approach has its limitations. The purpose of this article is to explore common method variance bias as…

Private Speech Moderates the Effects of Effortful Control on Emotionality

Science.gov (United States)

Day, Kimberly L.; Smith, Cynthia L.; Neal, Amy; Dunsmore, Julie C.

2018-01-01

Research Findings: In addition to being a regulatory strategy, children's private speech may enhance or interfere with their effortful control used to regulate emotion. The goal of the current study was to investigate whether children's private speech during a selective attention task moderated the relations of their effortful control to their…

Analysis of Critical Factors and Difficulties in Maintaining Historical Building - A Current Implementation

Directory of Open Access Journals (Sweden)

Baharuddin M.N.

2014-01-01

Full Text Available Historic buildingis one of the highly valuable assets to the country especially in a way to shows its history for the next generation instead to make a profit through the excellent promotion in tourism purpose.The Malaysian Government has allocated a huge of financial support in order to conserve and preserve the historic building. However, the majority of the historic building is still in ‘poor’ condition without any improvement regarding to the pro-active approach.This paper presents part of this research which investigates the key components consists of issues and difficulties in term of critical factors. The findings reveal that there are several difficulties in maintaining a historic building. The identification of key components will facilitate the stakeholders to focus on the variable and resources to make the success in maintaining and managing the historic building.

Building Energy Monitoring and Analysis

Energy Technology Data Exchange (ETDEWEB)

Hong, Tianzhen; Feng, Wei; Lu, Alison; Xia, Jianjun; Yang, Le; Shen, Qi; Im, Piljae; Bhandari, Mahabir

2013-06-01

U.S. and China are the world’s top two economics. Together they consumed one-third of the world’s primary energy. It is an unprecedented opportunity and challenge for governments, researchers and industries in both countries to join together to address energy issues and global climate change. Such joint collaboration has huge potential in creating new jobs in energy technologies and services. Buildings in the US and China consumed about 40% and 25% of the primary energy in both countries in 2010 respectively. Worldwide, the building sector is the largest contributor to the greenhouse gas emission. Better understanding and improving the energy performance of buildings is a critical step towards sustainable development and mitigation of global climate change. This project aimed to develop a standard methodology for building energy data definition, collection, presentation, and analysis; apply the developed methods to a standardized energy monitoring platform, including hardware and software, to collect and analyze building energy use data; and compile offline statistical data and online real-time data in both countries for fully understanding the current status of building energy use. This helps decode the driving forces behind the discrepancy of building energy use between the two countries; identify gaps and deficiencies of current building energy monitoring, data collection, and analysis; and create knowledge and tools to collect and analyze good building energy data to provide valuable and actionable information for key stakeholders.

24 CFR 901.40 - Indicator #7, resident services and community building.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Indicator #7, resident services and community building. 901.40 Section 901.40 Housing and Urban Development Regulations Relating to Housing and... services and community building. This indicator examines the PHA's efforts to deliver quality customer...

Building Software Tools for Combat Modeling and Analysis

National Research Council Canada - National Science Library

Yuanxin, Chen

2004-01-01

... (Meta-Language for Combat Simulations) and its associated parser and C++ code generator were designed to reduce the amount of time and developmental efforts needed to build sophisticated real world combat simulations. A C++...

Extensive Renovation of Heritage Buildings

DEFF Research Database (Denmark)

Rasmussen, Torben Valdbjørn; Møller, Eva B.; Buch-Hansen, Thomas Cornelius

2015-01-01

In the debate on whether or not heritage buildings should be included in work to mitigate climate change impacts, it is important to assess the impact of these buildings. Therefore the results of an extensive energy upgrading of a listed complex was studied. Climate change and measures to mitigate...... its effects have been a global priority for more than a decade. Efforts to mitigate climate change have focused on reducing greenhouse gas emissions, especially CO2. As a consequence, there is an increased interest in reducing the energy consumption and increase the indoor climate standard of many...... feasible energy-upgrading measures for implementation including measures to provide an acceptable indoor climate. The energy savings as well as the reduction of CO2 emissions are calculated. Furthermore, it is discussed how measures can affect the durability of a heritage building, as measures may create...

Anticipated emotions and effort allocation in weight goal striving.

Science.gov (United States)

Nelissen, Rob M A; de Vet, Emely; Zeelenberg, Marcel

2011-02-01

This study aimed to investigate the influence of anticipated emotions on preventive health behaviour if specified at the level of behavioural outcomes. Consistent with predictions from a recently developed model of goal pursuit, we hypothesized that the impact of emotions on effort levels depended on the perceived proximity to the goal. Participants with weight-loss intentions were randomly selected from an Internet panel and completed questionnaires at three points in time, baseline (T1; N= 725), 2 weeks later at T2 (N= 582) and again 2 months later at T3 (N= 528). Questionnaires assessed anticipated emotions (at T1) and experienced emotions (at T2) towards goal attainment and non-attainment. Goal proximity, goal desirability, and effort levels in striving for weight loss were assessed at both T1 and T2. Current and target weights were reported at all three assessments. In line with predictions, we found that negative anticipated emotions towards goal non-attainment resulted in increased effort but only if people perceived themselves in close proximity to their goal. Effort, in turn, predicted weight loss and goal achievement. The current data bear important practical implications as they identify anticipated emotions as targets of behaviour change interventions aimed to stimulate effort in striving for broad, health-related goals like weight loss. ©2010 The British Psychological Society.

Buildings of the Future Scoping Study: A Framework for Vision Development

Energy Technology Data Exchange (ETDEWEB)

Wang, Na [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Goins, John D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-02-01

The Buildings of the Future Scoping Study, funded by the U.S. Department of Energy (DOE) Building Technologies Office, seeks to develop a vision for what U.S. mainstream commercial and residential buildings could become in 100 years. This effort is not intended to predict the future or develop a specific building design solution. Rather, it will explore future building attributes and offer possible pathways of future development. Whether we achieve a more sustainable built environment depends not just on technologies themselves, but on how effectively we envision the future and integrate these technologies in a balanced way that generates economic, social, and environmental value. A clear, compelling vision of future buildings will attract the right strategies, inspire innovation, and motivate action. This project will create a cross-disciplinary forum of thought leaders to share their views. The collective views will be integrated into a future building vision and published in September 2015. This report presents a research framework for the vision development effort based on a literature survey and gap analysis. This document has four objectives. First, it defines the project scope. Next, it identifies gaps in the existing visions and goals for buildings and discusses the possible reasons why some visions did not work out as hoped. Third, it proposes a framework to address those gaps in the vision development. Finally, it presents a plan for a series of panel discussions and interviews to explore a vision that mitigates problems with past building paradigms while addressing key areas that will affect buildings going forward.

Radon in public buildings

International Nuclear Information System (INIS)

Schulz, H.; Flesch, K.; Hermann, E.; Loebner, W.; Leissring, B.

2009-01-01

From the Free State of Saxony, a study was commissioned to survey how reliable measurements to characterize the radon situation in public buildings at a reasonable financial and human effort can be carried out to reduce radiation exposure in public buildings. The study approach was for 6 objects. To characterize the radon situation the time evolution measurement of radon concentrations of more than 1 to 2 weeks turned out to be sufficient. A novel data analysis enables the identification of a ''typical daily alteration of the radon concentration'' depending on the ventilation conditions and the daily use of the offices or class rooms. The identification of typical diurnal radon variations for the working time and weekends or holidays is of fundamental importance for assessing the exposure situation in public buildings. It was shown that the radon concentration during working time are in general much lower than in the times when the buildings (offices) are unused. It turned out that the long-term radon measurements with nuclear track detectors within distinct time regimes (day / night, working hours / leisure time) by utilizing switch modules are very efficient to estimate the actual exposure. (orig.)

Statistical models describing the energy signature of buildings

DEFF Research Database (Denmark)

Bacher, Peder; Madsen, Henrik; Thavlov, Anders

2010-01-01

Approximately one third of the primary energy production in Denmark is used for heating in buildings. Therefore efforts to accurately describe and improve energy performance of the building mass are very important. For this purpose statistical models describing the energy signature of a building, i...... or varying energy prices. The paper will give an overview of statistical methods and applied models based on experiments carried out in FlexHouse, which is an experimental building in SYSLAB, Risø DTU. The models are of different complexity and can provide estimates of physical quantities such as UA......-values, time constants of the building, and other parameters related to the heat dynamics. A method for selecting the most appropriate model for a given building is outlined and finally a perspective of the applications is given. Aknowledgements to the Danish Energy Saving Trust and the Interreg IV ``Vind i...

Application of laser scanning technique in earthquake protection of Istanbul's historical heritage buildings

Science.gov (United States)

Çaktı, Eser; Ercan, Tülay; Dar, Emrullah

2017-04-01

Istanbul's vast historical and cultural heritage is under constant threat of earthquakes. Historical records report repeated damages to the city's landmark buildings. Our efforts towards earthquake protection of several buildings in Istanbul involve earthquake monitoring via structural health monitoring systems, linear and non-linear structural modelling and analysis in search of past and future earthquake performance, shake-table testing of scaled models and non-destructive testing. More recently we have been using laser technology in monitoring structural deformations and damage in five monumental buildings which are Hagia Sophia Museum and Fatih, Sultanahmet, Süleymaniye and Mihrimah Sultan Mosques. This presentation is about these efforts with special emphasis on the use of laser scanning in monitoring of edifices.

Integration of net zero energy building with smart grid to improve regional electrification ratio towards sustainable development

Science.gov (United States)

Latief, Yusuf; Berawi, Mohammed Ali; Supriadi, Leni; Bintang Koesalamwardi, Ario; Petroceany, Jade; Herzanita, Ayu

2017-12-01

Indonesia is currently encouraging its physical, social and economy development. Physical development for economic development have to be supported by energy availability. For Indonesia, 90% of electrification ratio is still become an important task that has to be completed by the Government. However, the effort to increase electrification can become an environmental problem if it’s done with BAU scenario. The by-product of electric generation is the GHG, which increasing every year since 2006 from various sectors i.e. industry, housing, commercial, transportation, and energy. Net Zero Energy Building (NZEB) is an energy efficient building which can produce energy independently from clean and renewable sources. The energy that is generated by NZEB can be used for the building itself, and can be exported to the central grid. The integration of NZEB and Smart Grid can solve today’s issue on electrification ratio. Literature study will find benchmarks which can be applied in Indonesia along with possible obstacles in applying this technology.

MRP (materiel requirements planning) II education: a team-building experience.

Science.gov (United States)

Iemmolo, G R

1994-05-01

Conestoga Wood Specialties, a leader in the woodworking industry, is constantly striving for continuous improvement in manufacturing and service. Recently, the company embarked on a major MRP II education effort that served as a framework for team building. This team building concept has carried over into other aspects related to the business, such as the formalization of the sales and operations planning meeting. At Conestoga Wood, it is recognized that successful team building is necessary to achieve and maintain world-class performance.

21 CFR 225.20 - Buildings.

Science.gov (United States)

2010-04-01

... CURRENT GOOD MANUFACTURING PRACTICE FOR MEDICATED FEEDS Construction and Maintenance of Facilities and Equipment § 225.20 Buildings. (a) The location, design, construction, and physical size of the buildings and other production facilities are factors important to the manufacture of medicated feed. The features of...

Country ownership and capacity building: the next buzzwords in health systems strengthening or a truly new approach to development?

Directory of Open Access Journals (Sweden)

Goldberg Jessica

2012-07-01

principles. More evidence as to how country-owned capacity building plays out in practice is needed to guide future interventions. The Global Health Initiative funding that is currently underway is an opportunity to collect evaluative data and establish a centralized and comprehensive evidence base that could be made available to guide future country-owned capacity building efforts.

Inpo/industry job and task analysis efforts

International Nuclear Information System (INIS)

Wigley, W.W.

1985-01-01

One of the goals of INPO is to develop and coordinate industrywide programs to improve the education, training and qualification of nuclear utility personnel. To accomplish this goal, INPO's Training and Education Division: conducts periodic evaluations of industry training programs; provides assistance to the industry in developing training programs; manages the accreditation of utility training programs. These efforts are aimed at satisfying the need for training programs for nuclear utility personnel to be performance-based. Performance-based means that training programs provide an incumbent with the skills and knowledge required to safely perform the job. One of the ways that INPO has provided assistance to the industry is through the industrywide job and task analysis effort. I will discuss the job analysis and task analysis processes, the current status of JTA efforts, JTA products and JTA lessons learned

Significance of Building Maintenance Management Systems towards Sustainable Development

Directory of Open Access Journals (Sweden)

M.A. Othuman Mydin

2014-05-01

Full Text Available Building maintenance management is an organized and effective system of maintenance operations which is set up to deal with problems related to the upkeep of a building. Its goal, aside from locating and remedying a building’s deficiencies, is to effectively minimize the overall costs of maintenance and is also an effort to maximize the gain and benefits from the savings. There are a few factors that influence decisions to undertake maintenance work. The principal goal of maintenance is to protect a building in the early stage of issues as they arise. Some major reasons for maintaining a building include retaining its reputation and value of investments, maintaining the building in a condition which allows it to accomplish its purpose, and presenting a good outer shell. This paper will review and discuss some of the major elements of building maintenance towards achieving sustainable buildings.

Enhancing Homeland Security Efforts by Building Strong Relationships between the Muslim Community and Local Law Enforcement

National Research Council Canada - National Science Library

Jensen, Dennis L

2006-01-01

... to follow up on the incident and to prevent future attacks. It is undeniable that building a strong relationship between the local police and the Muslim community is essential in defending America against acts of terrorism...

Quantification of fossil fuel CO2 at the building/street level for large US cities

Science.gov (United States)

Gurney, K. R.; Razlivanov, I. N.; Song, Y.

2012-12-01

Quantification of fossil fuel CO2 emissions from the bottom-up perspective is a critical element in emerging plans on a global, integrated, carbon monitoring system (CMS). A space/time explicit emissions data product can act as both a verification and planning system. It can verify atmospheric CO2 measurements (in situ and remote) and offer detailed mitigation information to management authorities in order to optimize the mix of mitigation efforts. Here, we present the Hestia Project, an effort aimed at building a high resolution (eg. building and road link-specific, hourly) fossil fuel CO2 emissions data product for the urban domain as a pilot effort to a CMS. A complete data product has been built for the city of Indianapolis and preliminary quantification has been completed for Los Angeles and Phoenix (see figure). The effort in Indianapolis is now part of a larger effort aimed at a convergent top-down/bottom-up assessment of greenhouse gas emissions, called INFLUX. Our urban-level quantification relies on a mixture of data and modeling structures. We start with the sector-specific Vulcan Project estimate at the mix of geocoded and county-wide levels. The Hestia aim is to distribute the Vulcan result in space and time. Two components take the majority of effort: buildings and onroad emissions. In collaboration with our INFLUX colleagues, we are transporting these high resolution emissions through an atmospheric transport model for a forward comparison of the Hestia data product with atmospheric measurements, collected on aircraft and cell towers. In preparation for a formal urban-scale inversion, these forward comparisons offer insights into both improving our emissions data product and measurement strategies. A key benefit of the approach taken in this study is the tracking and archiving of fuel and process-level detail (eg. combustion process, other pollutants), allowing for a more thorough understanding and analysis of energy throughputs in the urban

An opportunity cost model of subjective effort and task performance

Science.gov (United States)

Kurzban, Robert; Duckworth, Angela; Kable, Joseph W.; Myers, Justus

2013-01-01

Why does performing certain tasks cause the aversive experience of mental effort and concomitant deterioration in task performance? One explanation posits a physical resource that is depleted over time. We propose an alternate explanation that centers on mental representations of the costs and benefits associated with task performance. Specifically, certain computational mechanisms, especially those associated with executive function, can be deployed for only a limited number of simultaneous tasks at any given moment. Consequently, the deployment of these computational mechanisms carries an opportunity cost – that is, the next-best use to which these systems might be put. We argue that the phenomenology of effort can be understood as the felt output of these cost/benefit computations. In turn, the subjective experience of effort motivates reduced deployment of these computational mechanisms in the service of the present task. These opportunity cost representations, then, together with other cost/benefit calculations, determine effort expended and, everything else equal, result in performance reductions. In making our case for this position, we review alternate explanations both for the phenomenology of effort associated with these tasks and for performance reductions over time. Likewise, we review the broad range of relevant empirical results from across subdisciplines, especially psychology and neuroscience. We hope that our proposal will help to build links among the diverse fields that have been addressing similar questions from different perspectives, and we emphasize ways in which alternate models might be empirically distinguished. PMID:24304775

School Building Organisation in Greece.

Science.gov (United States)

PEB Exchange, 2001

2001-01-01

Discusses the past and current organizational structure of Greece's School Building Organisation, a body established to work with government agencies in the design and construction of new buildings and the provisioning of educational equipment. Future planning to incorporate culture and creativity, sports, and laboratory learning in modern school…

Energy efficient direct current distribution in commercially used buildings with smart power link to the AC distribution grid; Energieeffiziente Gleichstromverteilung in kommerziell genutzten Gebaeuden mit intelligenter Kopplung zum Niederspannungsnetz

Energy Technology Data Exchange (ETDEWEB)

Weiss, Roland [Siemens AG, Erlangen (Germany); Boeke, Ulrich [Philips Group Innovation-Research, Eindhoven (Netherlands); Maurer, Wilhelm [Infineon Technologies AG, Neubiberg (Germany); Zeltner, Stefan [Fraunhofer-Inst. fuer Integrierte Systeme und Bauelementetechnologie (IISB), Erlangen (Germany)

2012-07-01

The joint undertaking ''Direct Current Components and Grid'' (DCC+G) takes on the strategic challenge to reduce energy consumption and thus the reduction of CO{sub 2} emission caused by commercially used buildings through research in the fields of Direct Current distribution at a voltage level of {+-} 380 V. The major energy consumers in commercially used buildings, ready for the ''net-zero-energy'' goal of the European Union, are heat pumps for heating, ventilation systems, air conditioning units, cooling units (HVAC), lighting systems and information technology. All these components and subsystems have in common, that the most efficient versions would benefit from a direct current supply. Additionally the local producers of electric energy like photovoltaic systems usually generate DC-current. A Direct Current distribution grid within buildings would avoid the repeating conversion from DC and AC an vice versa and therefore reduce conversion losses. Important components of a direct current distribution grid are central, smart, high efficient, bidirectional rectifiers replacing the large number of small, less efficient rectifiers used today. Such large central rectifiers units could additionally be used to actively improve the power quality of the smart local AC distribution grid. One major part of the described activities is to show energy savings of about 5 % of electrical energy with a 2-phase direct current distribution grid using a voltage level of {+-} 380 V. (orig.)

Key decisions in a generic process for disposition of buildings that have actual or potential radiological contamination

International Nuclear Information System (INIS)

Spesard, A.; Donavan, K.; Bowden, B.; Crane, L.; Jensen, G.; Fox, K.L.; Goodwin, R.; Vandegrift, R.

1997-01-01

The Cleanup Standards Committee, formed within the Ohio Federal Facilities Forum, focuses on addressing issues related to cleanup levels and standards. To facilitate decision-making for the disposition of buildings that have potential or actual radiological contamination, the Cleanup Standards Committee developed a process to support building disposition decisions. This process is needed for two reasons: (1) due to changing missions, an increasing number of buildings on federal properties require disposition, and (2) current federal initiatives encourage the transfer of buildings and land for reuse and economic redevelopment. Since the committee developed this process using a teaming effort, the process reflects the experience, expertise, and opinions of committee members and other individuals with a broad range of experience and knowledge. The Generic Process for the Disposition of Buildings that have Potential or Actual Radiological Contamination is intended for use by Federal Facilities responsible for the cleanup of buildings at sites that have radiological process history. This process provides (1) a framework and supporting implementation guidelines for evaluating buildings that have actual or potential radiological contamination, and (2) a process for making building disposition decisions. This paper outlines on the key decision points and the associated data requirements of the process. Specifically, this paper focuses on the following decisions: Which decision-makers are appropriate to involve in the building disposition process; What is the preferred disposition of a building; What criteria are applicable for unconditional release; Is there sufficient existing information to proceed with disposition of a building; What level of survey is appropriate to determine and/or implement a preferred disposition of a building; and how are uncertainties addressed when implementing a building disposition

A Review of Maximizing Muscle Building Capabilities with Anabolic Enzymes

Directory of Open Access Journals (Sweden)

Elvis Agbons

2017-07-01

Full Text Available Building muscle at a rate faster than the human body would under normal circumstances is of great importance in skills and activities that require intense muscular effort. Although physical training stands as the backbone of muscle building, physiological variations make it an unfair yardstick in measuring individual efforts. Other methods of muscle building such as specialised nutrition and the use of digestive enzymes in breaking down proteins for quick absorption are also commonly used together with physical training. The use of anabolic substances, however, has proved more successful than any of the aforementioned methods. Nevertheless, with it comes ethical, legal, and clinical issues especially in sports. In spite of this, athletes still find ways of circumventing test protocols which have been a major issue for the World Anti-Doping Agency. However, advancements in science have opened the doorway for anabolic enzymes which are the ultimate muscle growers to be more or less, directly manipulated. One method is gene doping which involves altering gene expressions. The future of muscle building lies in man’s ability to decisively alter the functioning of these enzymes directly.

The capacity building of disaster management in Bojonegoro regency

Science.gov (United States)

Isbandono, P.; Prastyawan, A.; Gamaputra, G.

2018-01-01

East Java is a disaster-prone area. Head of the National Disaster Management Agency, Syamsul Maarif (2012) states that “East Java is a disaster supermarket area. Referring to Act Number 24 Year 2007 Concerning Disaster Management, disaster prevention activities are a series of activities undertaken as an effort to eliminate and/or reduce the threat of disaster (Article 1, paragraph 6).The disaster mitigation is a series of efforts to reduce disaster risk, through physical development and awareness and capacity building in the face of disaster (Article 1, paragraph 9). In 2009, the Provincial Government of East Java has been established Regional Disaster Management Agency and complete it through Local Regulation of East Java Province Number 3 Year 2010. This research was conducted in Bojonegoro. This study described the capacity building disaster handling and used descriptive research with qualitative approach. It focused on the capacity building for community preparedness in the face of. This study showed the vulnerability of regions and populations to threats flood and drought in could be physical, social and/or economical. The aims of the capacity building for the individuals and organizations are to be used effectively and efficiently in order to achieve the goals of the individuals and organizations.

US computer research networks: Current and future

Science.gov (United States)

Kratochvil, D.; Sood, D.; Verostko, A.

1989-01-01

During the last decade, NASA LeRC's Communication Program has conducted a series of telecommunications forecasting studies to project trends and requirements and to identify critical telecommunications technologies that must be developed to meet future requirements. The Government Networks Division of Contel Federal Systems has assisted NASA in these studies, and the current study builds upon these earlier efforts. The current major thrust of the NASA Communications Program is aimed at developing the high risk, advanced, communications satellite and terminal technologies required to significantly increase the capacity of future communications systems. Also, major new technological, economic, and social-political events and trends are now shaping the communications industry of the future. Therefore, a re-examination of future telecommunications needs and requirements is necessary to enable NASA to make management decisions in its Communications Program and to ensure the proper technologies and systems are addressed. This study, through a series of Task Orders, is helping NASA define the likely communication service needs and requirements of the future and thereby ensuring that the most appropriate technology developments are pursued.

Efforts Towards The Development Of Recombinant Vaccines Against

African Journals Online (AJOL)

ABSTRACT. Hemorrhagic septicemia is caused by gram-negative bacterium of Pasteurella multocida (P. multocida) strains. Most of the current vaccines against P. multocida have shortcomings. Presently, there is increasing efforts towards construction of recombinant clone for vaccine development against P. multocida.

Computer automation for protection factor calculations of buildings

International Nuclear Information System (INIS)

Farafat, M.A.Z.; Madian, A.H.

2011-01-01

The protection factors of buildings are different according to the constructional and architectural specifications. Uk and USA performed a calculation using manual method to calculate the protection factor for any building which may protect the people in it from gamma rays and fall-out.The manual calculation method is very complex which is very difficult to use, for that reason the researchers simplify this method in proposed form which will be easy to understand and use. Also the researchers have designed a computer program ,in visual basic, to calculate the different protection factors for buildings. The program aims to provide the missing time in the calculation processes to calculate the protection in some spaces for any building through entering specifications data for any building .The program will modify the protection factor in very short time which will save the effort and time in comparison with the manual calculation.

CRITICAL FACTORS THAT LEAD TO GREEN BUILDING OPERATIONS AND MAINTENANCE PROBLEMS IN MALAYSIA

OpenAIRE

Izran Sarrazin MOHAMMAD; Nurul Nadiah ZAINOL; Shardy ABDULLAH; Neo Bee WOON; Nur Aqlima RAMLI

2014-01-01

The development of green buildings has become a trend in recent years in the effort to enhance the well-being of the community, environmental health, and life-cycle cost. However, many have argued that the complexities rendered by green buildings during the operational and maintenance phase often overshadow the benefits that can be gained through the development of green buildings. Several factors that lead to complexities in managing and maintaining green buildings have been highlighted by s...

Photovoltaics for Buildings Cutting-Edge PV

International Nuclear Information System (INIS)

Hayter, S. J.; Martin, R. L.

1998-01-01

Photovoltaic (PV) technology development for building-integrated applications (commonly called PV for Buildings) is one of the fastest growing areas in the PV industry. Buildings represent a huge potential market for photovoltaics because they consume approximately two-thirds of the electricity consumed in the US. The PV and buildings industries are beginning to work together to address issues including building codes and standards, integration, after-market servicing, education, and building energy efficiency. One of the most notable programs to encourage development of new PV-for-buildings products is the PV:BONUS program, supported by the US Department of Energy. Demand for these products from building designers has escalated since the program was initiated in 1993. This paper presents a range of PV-for-buildings issues and products that are currently influencing today's PV and buildings markets

Climate leadership program: Building Africa's resilience through ...

International Development Research Centre (IDRC) Digital Library (Canada)

Activities include training, research, testing of climate solutions in local communities, and coaching and mentorship in the area of policy development and advocacy. Emphasis will be placed on building leadership capacity among women. This is a collaborative effort between the University of Nairobi and the Institute of ...

Building Supervisory Confidence--A Key to Transfer of Training

Science.gov (United States)

Byham, William C.; Robinson, James

1977-01-01

A training concept is described which suggests that efforts toward maintaining and/or building the confidence of the participants in supervisory training programs can increase their likelihood of using the skills on the job. (TA)

Development of weightage for criteria affecting in retrofitting of existing building in Higher Learning Institution with clean energy initiatives

Science.gov (United States)

Izie Adiana Abidin, Nur; Aminuddin, Eeydzah; Zakaria, Rozana; Mazzuana Shamsuddin, Siti; Sahamir, Shaza Rina; Shahzaib, Jam; Nafis Abas, Darul

2018-04-01

Campus university building is the Higher Learning Institution (HLI) involves complex activities and operations, conserving the energy has become paramount important. There are several efforts taken by universities to improve its current energy use such as policy development, education, and adaption of energy conservation solution through retrofitting. This paper aims to highlight the importance of the criteria affecting in retrofitting of existing buildings with clean energy in order to achieve zero energy balance in buildings. The focus is given to the development of criteria for solar photovoltaic (solar PV), wind turbines and small-scale hydropower. A questionnaire survey was employed and distributed to the green building expert practitioner. Factor Analysis, Factor Score, and Weightage Factor were adapted as a method of analysis in order to produce the final result with weightage output for prioritization and ranking of the relevant criteria. The result performed assists to provide the stakeholders an overview of the important criteria that should be considered especially during the decision making to retrofit the existing buildings with clean energy resources. The criteria developed are also to establish a structured decision-making process and to ensure the selection of the decision or alternatives achieve the desired outcome.

On the application of multi-agent systems in buildings for improved building operations, performance and smart grid interaction : a survey

NARCIS (Netherlands)

Labeodan, T.M.; Aduda, K.O.; Boxem, G.; Zeiler, W.

2015-01-01

Toward efforts to improve sustainability of energy supply and to achieve worthwhile reduction in greenhouse gas emissions, in addition to the increased use of renewable energy sources in buildings, more emphasis is being placed on the need for improved control, management and coordination of

Current nuclear threats and possible responses

Science.gov (United States)

Lamb, Frederick K.

2005-04-01

Over the last 50 years, the United States has spent more than 100 billion developing and building a variety of systems intended to defend its territory against intercontinental-range ballistic missiles. Most of these systems never became operational and ultimately all were judged ineffective. The United States is currently spending about 10 billion per year developing technologies and systems intended to defend against missiles that might be acquired in the future by North Korea or Iran. This presentation will discuss these efforts ad whether they are likely to be more effective than those of the past. It will also discuss the proper role of anti-ballistic programs at a time when the threat of a nuclear attack on the U.S. by terrorists armed with nuclear weapons is thought to be much higher than the threat of an attack by nuclear-armed ballistic missles.

Entrepreneurial Business Development Through Building Tribes

DEFF Research Database (Denmark)

Holzweber, Markus; Mattsson, Jan; Standing, Craig

2015-01-01

Understanding tribe development can be critical to the survival of entrepreneurial e-service ventures. This article presents findings on how a Swedish start-up industrial design company termed BETTER-DESIGN attempted to build a global presence by creating a tribe of followers on the web. From thi...... of electronic word of mouth in social network environments....... this single in-depth case study and a comprehensive literature review, a model is developed comprising the necessary components to succeed in tribe building efforts in social media. These components include social cohesion of the inner tribe (founders) in terms of vision, the creation of an icon (a...

Design experience on seismically isolated buildings

International Nuclear Information System (INIS)

Giuliani, G.C.

1989-01-01

This paper describes the practical problems associated with the structural design of a group of seismically isolated buildings now under construction in Ancona, Italy. These structures are the first seismically isolated buildings in Italy. Taking into account previous earthquakes, the structural design of these new buildings was performed according to an acceleration spectrum which was different from its Zone 2 seismic code and which provided protection for stronger ground motions. To minimize the cost of the structure, the buildings used ribbed plate decks, thus reducing the amount of material and the mass of the structures to be isolated. The design requirements, dynamic analysis performed, structural design, and practical engineering employed are reported in this paper. A comparison between the costs of a conventionally designed and a base-isolated structure is also reported. The tests undertaken for certifying the mechanical properties of the isolators for both static and dynamic loads are also described, as is the full-scale dynamic test which is scheduled for next year (1990) for one of the completed buildings. Lessons learned in this design effort are potentially applicable to seismic base isolation for nuclear power plants

Overview of NASA/OAST efforts related to manufacturing technology

Science.gov (United States)

Saunders, N. T.

1976-01-01

An overview of some of NASA's current efforts related to manufacturing technology and some possible directions for the future are presented. The topics discussed are: computer-aided design, composite structures, and turbine engine components.

Building America Case Study: Trade-Friendly Retrofit Insulated Panels for Existing Buildings, Albany, New York

Energy Technology Data Exchange (ETDEWEB)

2016-03-01

This project evaluated the effectiveness and affordability of integrating retrofit insulated panels into a re-siding project. The Partnership for Home Innovation (PHI) teamed with New York State Energy Research and Development Authority (NYSERDA), the Albany Housing Authority (AHA), and the New York State Weatherization Assistance Program (WAP) administered by Albany Community Action Partnership to demonstrate an energy retrofit and siding upgrade on a two-story, seven unit, multifamily building in Albany New York (CZ 5). The project focused on accomplishing three goals - doubling the existing wall thermal resistance (from approximately R-13 to a weighted average of R-27), reduction of building air leakage, and completion of the retrofit within a budget where the additional cost for upgrading wall's thermal resistance is equal to the cost of the standard re-siding effort (i.e., the total cost of the energy efficient re-siding scope of work is not more than double the cost of the standard re-siding effort). Lessons learned from the project strongly indicate that the retrofit panel technology can be installed using common installation practices and with minimal training. Other lessons learned include limitation on the use of standard air sealing materials during cold weather installations and the need to develop better installation guidance for trades working with the level of tolerances that may be present in the existing structure. This technology demonstration showed that exterior retrofit panels provide a viable and reasonable option for the siding trades to increase market opportunities and achieve synergistic benefits for aesthetic upgrades to a building's exterior.

A Simulation Method to Find the Optimal Design of Photovoltaic Home System in Malaysia, Case Study: A Building Integrated Photovoltaic in Putra Jaya

OpenAIRE

Riza Muhida; Maisarah Ali; Puteri Shireen Jahn Kassim; Muhammad Abu Eusuf; Agus G.E. Sutjipto; Afzeri

2009-01-01

Over recent years, the number of building integrated photovoltaic (BIPV) installations for home systems have been increasing in Malaysia. The paper concerns an analysis - as part of current Research and Development (R&D) efforts - to integrate photovoltaics as an architectural feature of a detached house in the new satellite township of Putrajaya, Malaysia. The analysis was undertaken using calculation and simulation tools to optimize performance of BIPV home system. In this study, a the simu...

Efforts towards the development of recombinant Vaccines against ...

African Journals Online (AJOL)

Hemorrhagic septicemia is caused by gram-negative bacterium of Pasteurella multocida (P. multocida) strains. Most of the current vaccines against P. multocida have shortcomings. Presently, there is increasing efforts towards construction of recombinant clone for vaccine development against P. multocida. In this review an ...

Decision-making in the Pre-design Stage of Sustainable Building Renovation Projects

DEFF Research Database (Denmark)

Gade, Anne Nørkjær; Jensen, Rasmus Lund; Larsen, Tine Steen

2017-01-01

There is a great potential in renovating our existing building stock, in terms of improving environmental, economic and social qualities. Meeting the increasing performance requirements for sustainable construction entails an increasing level of complexity in the design process of both new...... buildings and renovation projects. Decision support tools are one solution that can help the building owner manage this complexity. This study investigates the current decision-making processes among Danish professional building owners, in order to propose a conceptual framework for future decision support...... tools for sustainable renovation. Design Science Research Methodology has been used as the main methodological framework. Current practices for setting goals for sustainability, determining the current state of the buildings and prioritizing which buildings to renovate within a building portfolio, have...

Building Capacity in the Public Utility Sectors of Basra, Iraq

National Research Council Canada - National Science Library

Trainor, Tim; Henderson, Dale

2007-01-01

... in provincial reconstruction efforts. Specifically, the mission was to assist in building the capacity of the public sector utility leadership in project prioritization, project planning and project management in order to enhance...

Building the Capacity of the HIV Prevention Workforce

Centers for Disease Control (CDC) Podcasts

2010-07-29

This podcast provides an overview of CDC's HIV prevention capacity building efforts with community-based organizations and health departments.  Created: 7/29/2010 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention.   Date Released: 7/29/2010.

Future Directions for Building Services Technologies in Denmark

DEFF Research Database (Denmark)

Marsh, Rob

2008-01-01

strategies for the effective integration of building services, and by developing new industrialised solutions for building services. The paper is based on the current Danish situation, and is based on linking research on building services, user needs, building design and new industrial processes.  ......  The hypothesis of this paper is that industrial transformation in the Danish construction sector needs in the future to focus on integrating building services technologies into the buildings. This can be illustrated by analysing historical developments in building services usage, exploring design...

Building envelope influence on the annual energy performance in office buildings

Directory of Open Access Journals (Sweden)

Harmati Norbert L.

2016-01-01

Full Text Available The objective of the research is to determine the quantitative influence of building envelope on the annual heating and cooling energy demand in office buildings demonstrated on a reference office-tower building located in Novi Sad, Serbia. The investigation intended to find preferable and applicable solutions for energy performance improvement in currently inefficient office buildings. A comparative and evaluative analysis was performed among the heating energy expenses and simulated values from the multi-zone model designed in EnergyPlus engine. The research determines an improved window to wall ratio using dynamic daylight simulation and presents the influence of glazing parameters (U-value, Solar heat gain coefficient - SHGC on the annual energy performance. Findings presented window to wall ratio reduction down to 30% and point out the significance of the SHGC parameter on the overall energy performance of buildings with high internal loads. The calculation of the air-ventilation energy demand according to EN 15251 is included respectively. Results offer effective methods for energy performance improvement in temperate climate conditions.

Radionuclide distribution in TMI-2 reactor building basement liquids and solids

International Nuclear Information System (INIS)

Horan, J.T.; McIsaac, C.V.; Keefer, D.G.

1984-01-01

As a result of the TMI-2 accident, approximately 2.46 x 10 6 L of contaminated water were released to the Reactor Building basement. The principal fission product release pathway from the damaged core was through the reactor coolant system (RCS) to the pressurizer, through the pressure-operated relief valve (PORV) on the pressurizer to the Reactor Coolant Drain Tank (RCDT), and then through the RCDT rupture disk to the Reactor Building basement. Since August 1979, a number of efforts have been made to determine the location, quantity, and composition of fission products released to the Reactor Building basement. These efforts have included sampling of the basement water and solids, the basement sump pump recirculation line, the RCDT, and visual surveys using a closed circuit television (CCTV) system. The analysis of basement samples has provided data on the physical and radioisotopic characteristics of the liquids and solids. This paper describes the sample collection techniques and discusses radiochemical analyses results

Building-in-Briefcase: A Rapidly-Deployable Environmental Sensor Suite for the Smart Building.

Science.gov (United States)

Weekly, Kevin; Jin, Ming; Zou, Han; Hsu, Christopher; Soyza, Chris; Bayen, Alexandre; Spanos, Costas

2018-04-29

A building’s environment has profound influence on occupant comfort and health. Continuous monitoring of building occupancy and environment is essential to fault detection, intelligent control, and building commissioning. Though many solutions for environmental measuring based on wireless sensor networks exist, they are not easily accessible to households and building owners who may lack time or technical expertise needed to set up a system and get quick and detailed overview of environmental conditions. Building-in-Briefcase (BiB) is a portable sensor network platform that is trivially easy to deploy in any building environment. Once the sensors are distributed, the environmental data is collected and communicated to the BiB router via the Transmission Control Protocol/Internet Protocol (TCP/IP) and WiFi technology, which then forwards the data to the central database securely over the internet through a 3G radio. The user, with minimal effort, can access the aggregated data and visualize the trends in real time on the BiB web portal. Paramount to the adoption and continued operation of an indoor sensing platform is battery lifetime. This design has achieved a multi-year lifespan by careful selection of components, an efficient binary communications protocol and data compression. Our BiB sensor is capable of collecting a rich set of environmental parameters, and is expandable to measure others, such as CO 2 . This paper describes the power characteristics of BiB sensors and their occupancy estimation and activity recognition functionality. We have demonstrated large-scale deployment of BiB throughout Singapore. Our vision is that, by monitoring thousands of buildings through BiB, it would provide ample research opportunities and opportunities to identify ways to improve the building environment and energy efficiency.

Measuring building change : a method to capture building knowledge

NARCIS (Netherlands)

Choukry, M.

1993-01-01

Buildings are subject to change of requirements during their periods of use. In the last decades it has been mostly assumed that the rate of change is increasing. Exact description of the type of change or the amount of change is not always investigated. Requirements change knowledge in currently

Reviewing efforts in global forest conservation for sustainable forest ...

African Journals Online (AJOL)

Reviewing efforts in global forest conservation for sustainable forest management: The World Wide Fund (WWF) case study. ... Global Journal of Pure and Applied Sciences. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current ...

Metal transfer and build-up in friction and cutting

CERN Document Server

Kuznetsov, V D

1956-01-01

Metal Transfer and Build-up in Friction and Cutting aims to systematize our knowledge of the metal build-up, to describe some of the investigations past and present carried out in SFTI (Tomsk), and to make an effort to explain a number of the phenomena in cutting, scratching, and sliding from the point of view of metal transfer theory. The book opens with a chapter on the temperature of the rubbing interface of two solids. This temperature is needed in order to elucidate the nature of the formation of a build-up in scratching, cutting, and sliding. Separate chapters follow on the seizure phen

Survey of strategies for low-energy buildings in EU countries; Kortlaegning af strategier for lavenergibyggeri i EU lande

Energy Technology Data Exchange (ETDEWEB)

2011-02-15

The overall objective of this task is to identify and analyze several European countries' approaches to regulate energy efficiency in new buildings. In addition, the study maps the initiatives established in relation to introduce voluntary low energy mechanisms at national level. As part of this work it has been a major goal to explore how individual countries are preparing the introduction of a ''nearly zero'' energy framework. The introduction of a ''nearly zero'' framework has been invoked via the new revised Building Directive (2010/31/EU) which requires that all new buildings are ''Nearly Zero'' by 31 December 2020, however, new public buildings must meet ''nearly zero'' requirement already by 31. December 2018. Finally, the survey also includes an examination of national and political conditions and current legislation on energy consumption in buildings. The countries in the survey are: Norway, Sweden, Finland, Austria, Germany, Holland, Belgium, Britain, France, Switzerland and to a limited extent Ireland and Poland. The comparative analysis of the countries' efforts is presented in the main part of the report, and the individual country reports are presented in appendices. (LN)

Energy Design Analysis and Evaluation of a Proposed Air Rescue and Fire Fighting Administration Building for Teterboro Airport

Energy Technology Data Exchange (ETDEWEB)

Griffith, B.; Pless, S.; Talbert, B.; Deru, M.; Torcellini, P.

2003-07-01

A new/proposed building for the Teterboro Airport was selected as a case study for High Performance Building Initiative research efforts. This report documents research-level energy analysis conducted on the Teterboro Airport building during predesign and design phases of the project.

Country Report on Building Energy Codes in China

Energy Technology Data Exchange (ETDEWEB)

Shui, Bin; Evans, Meredydd; Lin, H.; Jiang, Wei; Liu, Bing; Song, Bo; Somasundaram, Sriram

2009-04-15

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in China, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope and HVAC) for commercial and residential buildings in China.

Country Report on Building Energy Codes in Japan

Energy Technology Data Exchange (ETDEWEB)

Evans, Meredydd; Shui, Bin; Takagi, T.

2009-04-15

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in Japan, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, and lighting) for commercial and residential buildings in Japan.

Country Report on Building Energy Codes in Australia

Energy Technology Data Exchange (ETDEWEB)

Shui, Bin; Evans, Meredydd; Somasundaram, Sriram

2009-04-02

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in Australia, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, and lighting) for commercial and residential buildings in Australia.

Country Report on Building Energy Codes in Canada

Energy Technology Data Exchange (ETDEWEB)

Shui, Bin; Evans, Meredydd

2009-04-06

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America . This reports gives an overview of the development of building energy codes in Canada, including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, lighting, and water heating) for commercial and residential buildings in Canada.

Healthy working days: The (positive) effect of work effort on occupational health from a human capital approach.

Science.gov (United States)

Urtasun, Ainhoa; Nuñez, Imanol

2018-04-01

The neoclassic economic rationale has taken for granted that the effect of effort on health is negative. However, several studies in the field of occupational health and medicine claim that working is clearly better for health than non-working or being unemployed, as some psychological and physical condition may improve with work effort. This paper analyzes the effect of work effort on occupational health. The proposed human capital approach builds upon the classic economic perspective, that assumes a negative effect of effort on health, and extends it by allowing positive effects, as suggested by occupational researchers. Using a sample from 2010 of 20,000 European workers we find that, under adequate working conditions, the level of effort (measured in working hours) at which health starts to deteriorate is very high (120 h per week). However, if working conditions are not adequate, even a moderate effort (35 h per week) can harm workers health. Copyright © 2018 Elsevier Ltd. All rights reserved.

CNAAA spent fuel complementary storage building (UFC) construction and licensing: an overview of current status

International Nuclear Information System (INIS)

Lima Neto, Bertino do Carmo; Pacifi, Cicero Durval

2013-01-01

The reprocessing of nuclear fuel assemblies could be a valuable solution in order to make available additional energy resources and also to decrease the volume of discarded materials. After the burning of nuclear fuel assemblies to produce electrical energy, these components have to be stored in the spent fuel pools of each unit, for at least 10 years, in order to decrease their residual heat. Even after this initial 10 year-period, these spent fuel assemblies still have a great amount of energy, which can be reused. Nowadays, the spent fuel materials can be reprocessed in order to produce electrical energy, or be stored to provide, in the future, an opportunity to decide how these materials will be treated. At the present moment, Brazil does not plan to reprocess these spent fuels assemblies, as performed by some other countries. Thus, Brazil intends to build a spent fuel long term intermediate storage facility to allow the chance to make a decision in the future, taking into account the available technology at that time. Considering the three CNAAA units (Angra 1, 2 and 3 of Central Nuclear Almirante Alvaro Alberto, the Brazilian nuclear power plant, located at Angra dos Reis county, Rio de Janeiro state) have a life time estimated in 60 years, and the intrinsical spent fuel pools storage capacity of these units, a Spent Fuel Complementary Storage Building - UFC has to be foreseen in order to increase the storage capacity of CNAAA. Therefore, the Spent Fuel Complementary Storage Building shall be in operation in 2018, capable to receive the first spent fuel assemblies from Angra 2 and, in the next year, from Angra 1. The same procedure will be applied for the spent fuel assemblies of Angra 3, currently in construction. The Spent Fuel Complementary Storage Building will be constructed and operated by Eletrobras Eletronuclear - the CNAAA owner - and will be located at the same site of the plant. Conceptually, the UFC will be built as a wet storage modality

Detection of suboptimal effort with symbol span: development of a new embedded index.

Science.gov (United States)

Young, J Christopher; Caron, Joshua E; Baughman, Brandon C; Sawyer, R John

2012-03-01

Developing embedded indicators of suboptimal effort on objective neurocognitive testing is essential for detecting increasingly sophisticated forms of symptom feigning. The current study explored whether Symbol Span, a novel Wechsler Memory Scale-fourth edition measure of supraspan visual attention, could be used to discriminate adequate effort from suboptimal effort. Archival data were collected from 136 veterans classified into Poor Effort (n = 42) and Good Effort (n = 94) groups based on symptom validity test (SVT) performance. The Poor Effort group had significantly lower raw scores (p Span test. A raw score cutoff of Span can effectively differentiate veterans with multiple failures on established free-standing and embedded SVTs.

Residential Buildings of the Turkish Republican Period as Architectural Heritage in Aydın

Directory of Open Access Journals (Sweden)

Gökçe ŞİMŞEK

2015-02-01

Full Text Available At the end of the 19th century, Aydın was both a sanjak center and an important commercial center. It was connected to Izmir via Anatolia’s first railway line and was the commercial center through which the produce of central Anatolia was transferred to the port of İzmir. During the War of Independence, most of Aydin’s structures were destroyed and the center left almost entirely abandoned. After the foundation of the Turkish Republic, many efforts were made to rebuild and revitalize the settlement according to a new city plan. In the years following the war, as residential numbers increased, new housing was built as required. In this context, the current study aimed to define the architectural characteristics, value, potential and preservation problems of those registered residential buildings built between 1923 and 1950 in the city. The study presents a comprehensive look at the architectural characteristics of residential buildings in Aydın, and reveals how difficulties in identifying and registering architectural products of the Turkish Republican period is exemplified in the case of the city’s residential buildings. The study also shows that the architectural characteristics of residential buildings constructed between 1923 and 1950 represent both the new face of the Turkish Republic and the traditional living styles of the people of Aydın.

Innovation Efforts in Education and School Administration: Views of Turkish School Administrators

Science.gov (United States)

Akin, Ugur

2016-01-01

Problem Statement: In the current information era, nearly all organizations make efforts to make innovations in the fields of information, communication, technology, etc. Educational organizations are no exception to this trend. Moreover, it can be argued that educational institutions make a particular effort to rapidly keep pace with change. In…

Relationship between Quality of Building Maintenance System and Occupant Satisfaction for Office Buildings

Directory of Open Access Journals (Sweden)

Hamid A.H.A

2014-03-01

Full Text Available Buildings will be weary, decaying and dirty as time goes by; but with highquality maintenance management we can prolong the life-span of building, provide building services and keep the building performance at its ultimate level. The importance of carrying out a systematic and routine maintenance is to conserve building performance. However, this task is often neglected due to various factors including misunderstanding the needs of the maintenance works and lack of budget allocation. This paper highlights the current practice of maintenance management that are being implemented in 6 office buildings located in Kuala Lumpur, Johor, Kedah and Pulau Pinang. Using the responses of questionnaire answered by 150 respondents employed from these selected offices, personal interviews and visual inspection the following findings were made: the occupants were satisfied with the maintenance management of their buildings elements and the delivery characteristics of maintenance works. Visual inspection however showed that some elements are not in a good condition. In conclusion, some recommendations are made to improve the existing system including the establishment of a maintenance plan, selection of experienced contractors and the provision of a service desk.

Physics Education Research efforts to promote diversity: Challenges and opportunities

Science.gov (United States)

Brahmia, Suzanne

2015-04-01

We begin this talk with a brief description of the gender and ethnic diversity of the physics community. We then discuss several current efforts within Physics Education Research that have the potential to further our understanding of issues surrounding underrepresentation. These efforts include research into (1) the role of community and strategies for developing effective communities; (2) physics identity and self-efficacy; (3) the affordances that students from underrepresented groups bring to physics learning; (4) socioeconomics and its impact on mathematization. One of the challenges to conducting this research is the relatively small proportion of underrepresented minority students in current physics classes, and the small number of women in physics and engineering majors. In collaboration with Stephen Kanim, New Mexico State University.

Building the capacity for public engagement with science in the United States.

Science.gov (United States)

Guston, David H

2014-01-01

This paper reviews efforts of the Center for Nanotechnology in Society at Arizona State University (CNS-ASU) to begin to build capacity for public engagement with science in the United States. First, the paper sets a context in the US of the current challenges to democracy and for science. It then reviews the literature on the accomplishments of the National Citizens' Technology Forum (NCTF) on nanotechnology and human enhancement, held in 2008, as well as some caveats that emerged from that enterprise. It concludes with a brief discussion of two kinds of activities - participation in the World Wide Views process organized by the Danish Board of Technology, and methodological innovations that include more concrete and experiential modes of engagement - that have spun off from the NCTF.

The implications of future building scenarios for long-term building energy research and development

Energy Technology Data Exchange (ETDEWEB)

Flynn, W.T.

1986-12-01

This report presents a discussion of alternative future scenarios of the building environment to the year 2010 and assesses the implications these scenarios present for long-term building energy R and D. The scenarios and energy R and D implications derived from them are intended to serve as the basis from which a strategic plan can be developed for the management of R and D programs conducted by the Office of Buildings and Community Systems, US Department of Energy. The scenarios and analysis presented here have relevance not only for government R and D programs; on the contrary, it is hoped that the results of this effort will be of interest and useful to researchers in both private and public sector organizations that deal with building energy R and D. Making R and D decisions today based on an analysis that attempts to delineate the nexus of events 25 years in the future are clearly decisions made in the face of uncertainty. Yet, the effective management of R and D programs requires a future-directed understanding of markets, technological developments, and environmental factors, as well as their interactions. The analysis presented in this report is designed to serve that need. Although the probability of any particular scenario actually occurring is uncertain, the scenarios to be presented are sufficiently robust to set bounds within which to examine the interaction of forces that will shape the future building environment.

Efforts in Public Relations on Fusion in Europe

Science.gov (United States)

Ongena, J.; van Oost, G.

2001-10-01

An overview will be given of different published materials currently in use in Europe for public relations on fusion. We will also present a CD-ROM for individual and classroom use, containing (i) a general background on different energy forms, (ii) general principles of fusion, (iii) current research efforts and (iv) future prospects of fusion. This CD-ROM is currently in English, German, French, Spanish, Portuguese and Italian. Fusion posters developed in collaboration with CPEP in Dutch, French, German, Italian, Spanish and Portuguese will be shown. Several new brochures and leaflets intended to increase the public awareness on fusion in Europe will be on display.

Effort reward imbalance is associated with vagal withdrawal in Danish public sector employees

DEFF Research Database (Denmark)

Eller, Nanna Hurwitz; Blønd, Morten; Nielsen, Martin

2011-01-01

The current study analyzed the relationship between psychosocial work environment assessed by the Effort Reward Imbalance Model (ERI-model) and heart rate variability (HRV) measured at baseline and again, two years later, as this relationship is scarcely covered by the literature.......The current study analyzed the relationship between psychosocial work environment assessed by the Effort Reward Imbalance Model (ERI-model) and heart rate variability (HRV) measured at baseline and again, two years later, as this relationship is scarcely covered by the literature....

Regional dialogue and multilateral arms control efforts today

International Nuclear Information System (INIS)

Graham, T. Jr.

1994-01-01

The significance of arms control and non-proliferation tasks is stressed emphasising what has been done, and-more important-what must still be done. Although tangible developments at the regional level may seem at times to be slow in coming, it is important to remember that the United States-Soviet transition from voluntary declarations to detailed arms control agreements with intrusive verification regimes spanned the entire length of cold war. Given the instabilities afflicting these regions, establishing a regional dialogue is itself a confidence-building measure. The experience of the United States and the former Soviet Union amply demonstrates that mere existence of regular dialogue can reduce tension by providing a platform for communication among military and Government participants even when political crisis prevents diplomatic contacts at senior levels. The international community should be encouraged by the progress that has been made to date to address regional instabilities. Such steps are an integral part of the international effort, carried out both at the United Nations and elsewhere, to adopt acceptable levels of conventional military forces and to eliminate weapons of mass destruction. Given the instabilities afflicting these regions, establishing a regional dialogue is itself a confidence-building measure. World changes, while potentially dangerous and certainly challenging, offer the hope of replacing antagonism with cooperation, creating a progressively more democratic global environment, preventing proliferation, and dampening regional conflicts. Continuing to make effective use of the entire mix of arms control and confidence-building tools will help to realize these hopes

Building Standards and Codes for Energy Conservation

Science.gov (United States)

Gross, James G.; Pierlert, James H.

1977-01-01

Current activity intended to lead to energy conservation measures in building codes and standards is reviewed by members of the Office of Building Standards and Codes Services of the National Bureau of Standards. For journal availability see HE 508 931. (LBH)

Hygrothermal Behavior, Building Pathology and Durability

CERN Document Server

Delgado, JMPQ

2013-01-01

The main purpose of this book, Hygrothermal, Building Pathology and Durability, is to provide a collection of recent research works to contribute to the systematization and dissemination of knowledge related to construction pathology, hygrothermal behaviour of buildings, durability and diagnostic techniques and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of building physics and hygrothermal behaviour, durability approach for historical and old buildings and building pathology vs. durability. The book is divided in several chapters that are a resume of the current state of knowledge for benefit of professional colleagues, scientists, students, practitioners, lecturers and other interested parties to network.

Assessing reserve-building pursuits and person characteristics: psychometric validation of the Reserve-Building Measure.

Science.gov (United States)

Schwartz, Carolyn E; Michael, Wesley; Zhang, Jie; Rapkin, Bruce D; Sprangers, Mirjam A G

2018-02-01

A growing body of research suggests that regularly engaging in stimulating activities across multiple domains-physical, cultural, intellectual, communal, and spiritual-builds resilience. This project investigated the psychometric characteristics of the DeltaQuest Reserve-Building Measure for use in prospective research. The study included Rare Patient Voice panel participants. The web-based survey included the Reserve-Building Measure with one-week re-test, measures of quality of life (QOL) and well-being (PROMIS General Health; NeuroQOL Cognitive Function and Positive Affect & Well-Being short-forms; Ryff Environmental Mastery subscale); and the Big Five Inventory-10 personality measure. Classical test theory and item response theory (IRT) analyses investigated psychometric characteristics of the Reserve-Building Measure. This North American sample (n = 592) included both patients and caregivers [mean age = 44, SD 19)]. Psychometric analyses revealed distinct subscales measuring current reserve-building activities (Active in the World, Games, Outdoors, Creative, Religious/Spiritual, Exercise, Inner Life, Shopping/Cooking, Passive Media Consumption,), past reserve-building activities (Childhood Activities, Achievement), and reserve-related person-factors (Perseverance, Current and Past Social Support, and Work Value). Test-retest stability (n = 101) was moderately high for 11 of 15 subscales (ICC range 0.78-0.99); four were below 0.59 indicating a need for further refinement. IRT analyses supported the item functioning of all subscales. Correlational analyses suggest the measure's subscales tap distinct constructs (range r = 0.11-0.46) which are not redundant with QOL, well-being, or personality (range r = 0.11-0.48). The Reserve-Building Measure provides a measure of activities and person-factors related to reserve that may potentially be useful in prospective research.

Healthy Buildings, Healthy People - A Vision for the 21st Century

Science.gov (United States)

Healthy Buildings, Healthy People lays out a blueprint by which agencies and individuals across the country, and around the world, can focus their efforts towards improvements in the indoor environment and health.

Building Management Information Systems to Coordinate Citywide Afterschool Programs: A Toolkit for Cities. Executive Summary

Science.gov (United States)

Kingsley, Chris

2012-01-01

This executive summary describes highlights from the report, "Building Management Information Systems to Coordinate Citywide Afterschool Programs: A Toolkit for Cities." City-led efforts to build coordinated systems of afterschool programming are an important strategy for improving the health, safety and academic preparedness of children…

Evolution of a Corporate Knowledge Management and Knowledge Building Effort: A Case Study of Just-In-Time Training and Support of Laboratory Robotic Workstations Driven Through Online Community Portals

Directory of Open Access Journals (Sweden)

Karen Kearns

2005-10-01

Full Text Available This is a case study of the evolution of how a successful knowledge management initiative was achieved in a corporate learning organization. The initiative was centered on providing training tools and documentation of automated laboratory workstations that are utilized by scientists in a drug discovery environment. The case study will address the software tools, processes for content building, and the organizational dynamics that either assisted or blocked the progression of the initiative. Over a four-year period three distinct efforts were implemented, each differed in the particular software tools and focus of the initiatives. This presentation will compare and contrast the elements that provided barriers to success in the first two initiatives and the mechanisms and focus used in the third initiative that proved successful, scalable, and sustainable.

Building Resilience in Nigeria's Energy Sector for Sustainable ...

African Journals Online (AJOL)

Resilience is the capacity of a system to absorb disturbance and reorganize while undergoing change so as to still retain essentially the same function, structure, identity, and feedbacks. Incidentally, Nigeria's energy sector is the heart beat of the nation. This paper therefore analyses resilience building efforts in Nigeria's ...

Empowering Learning through Natural, Human, and Building Ecologies.

Science.gov (United States)

Kobet, Robert J.

This article asserts that it is critical to understand the connections between human ecology and building ecology to create humane environments that show inspiration and creativity and that also serve diverse needs. It calls for efforts to: (1) construct an environmental education approach that fuses the three ecologies (natural, human, and…

Current design efforts for the gas-cooled fast reactor (GFR)

International Nuclear Information System (INIS)

Weaver, K.D.

2005-01-01

Current research and development on the Gas-Cooled Fast Reactor (GCFR) has focused on the design of safety systems that will remove the decay heat during accident conditions, ion irradiations of candidate ceramic materials, joining studies of oxide dispersion strengthened alloys; and within the Advanced Fuel Cycle Initiative (AFC I) the fabrication of carbide fuels and ceramic fuel matrix materials, development of non-halide precursor low density and high density ceramic coatings, and neutron irradiation of candidate ceramic fuel matrix and metallic materials. The vast majority of this work has focused on the reference design for the GCFR: a helium-cooled, direct Brayton cycle power conversion system that will operate with an outlet temperature of 850 C at 7 MPa. In addition to the work being performed in the United States, seven international partners under the Generation IV International Forum (GIF) have identified their interest in participating in research related to the development of the GCFR. These are EURATOM (European Commission), France, Japan, South Africa, South Korea, Switzerland, and the United Kingdom. Of these, EURATOM (including the United Kingdom), France, Japan, and Switzerland have active research activities with respect to the GCFR. The research includes GCFR design and safety, and fuels/in-core materials/fuel cycle projects. This paper outlines the current design status of the GCFR, and includes work done in the areas mentioned above. (Author)

Women's Networking and Alliance Building in Post-War Central America

OpenAIRE

Ilja Luciak

2002-01-01

Ilja A. Luciak examines the efforts of Central American women, from both the political left and right in El Salvador and Nicaragua, to build alliances across ideological boundaries in order to effectively advocate women's rights during the transition toward political systems rooted in democratic governance and gender equality. He discusses coalition-building in El Salvador and Nicaragua in order to demonstrate the progress that has been made and the key challenges confronting the leaders of t...

Ventilation measurements as an adjunct to radon measurements in buildings

International Nuclear Information System (INIS)

Knutson, E.O.; Franklin, H.

1977-01-01

The concentration of radon in a building is a function of the radon sources within the building and of the building's ventilation characteristics. To complement its radon measurement program, HASL is currently assessing apparatus and procedures for measuring building ventilation. Results are reported from ventilation measurements made in the laboratory and in a residential building

Building with History

DEFF Research Database (Denmark)

Douglas-Jones, Rachel; Adams, Charlotte; Green, Adrian

2014-01-01

Drawing on interdisciplinary research focusing on Durham University estate, we describe how buildings constructed as part of an eighteenth century transition to a high carbon coal-based economy, are used and understood by their current inhabitants. Applied heritage research has tended to focus on...

Fire Risk Analysis and Optimization of Fire Prevention Management for Green Building Design and High Rise Buildings: Hong Kong Experience

Directory of Open Access Journals (Sweden)

Yau Albert

2014-12-01

Full Text Available There are many iconic high rise buildings in Hong Kong, for example, International Commercial Centre, International Financial Centre, etc. Fire safety issue in high rise buildings has been raised by local fire professionals in terms of occupant evacuation, means of fire-fighting by fire fighters, sprinkler systems to automatically put off fires in buildings, etc. Fire risk becomes an important issue in building fire safety because it relates to life safety of building occupants where they live and work in high rise buildings in Hong Kong. The aim of this research is to identify the fire risk for different types of high rise buildings in Hong Kong and to optimise the fire prevention management for those high rise buildings with higher level of fire risk and to validate the model and also to carry out the study of the conflict between the current fire safety building code and the current trend of green building design. Survey via the 7-point scale questionnaire was conducted through 50 participants and their responses were received and analysed via the statistical tool SPSS software computer program. A number of statistical methods of testing for significantly difference in samples were adopted to carry out the analysis of the data received. When the statistical analysis was completed, the results of the data analysis were validated by two Fire Safety Experts in this area of specialisation and also by quantitative fire risk analysis.

Sustainable Building Life Cycle Design

Directory of Open Access Journals (Sweden)

Ginzburg Alexander

2016-01-01

Full Text Available The current building life cycle management system in the Russian Federation is a family of discrete subsystems that exist independently for different building life cycle stages. In this situation building reliability and sustainable functioning are out of the question. The implementation of a united information model (BIM-model intended to describe building entire life cycle will allow to raise the sustainability, but this will happen only if goals and concerns of all participants of the project process are properly coordinated. An important figure of process sustainability is the organizational and technological reliability (OTR that describes the possibility of a system to reach a goal. In case of building life cycle design, the economical efficiency of a building can be considered as the goal. The required technical, ecological, organizational, and other parameters form a complex of constraints that determine the area of allowable values for building functioning. In its broad meaning, OTR may be understood as the probability of receiving an economical effect based on the value of organizational and economical reliability (OER.

From Compliance to Service: Evolving the State Role to Support District Data Efforts to Improve Student Achievement

Science.gov (United States)

Shah, Rebecca

2011-01-01

As a result of state, national and federal leadership and political will, states have dramatically increased their capacity to collect robust longitudinal education data. However, without an equally ambitious effort to ensure access and build stakeholders' capacity to use data to increase student achievement, these infrastructure investments…

Integrated sustainable urban infrastructures in building projects

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev; Quitzau, Maj-Britt; Elle, Morten

2007-01-01

Current strategies in urban planning and development merely promote standardized building solutions, while failing to prioritize innovative approaches of integration between building projects and sustainable urban infrastructures. As a result of this, urban infrastructures – the urban veins...... – are outdated from a sustainability perspective. This paper looks into more holistic ways of approaching building projects and discuss whether this provide a basis for an increased integration of urban infrastructures within building projects. In our study, we especially emphasise how conventional ways...... of approaching building projects are influenced by lock-in of existing infrastructural systems and compare this with two examples of more holistic ways of approaching building projects, developed by two architecture firms. The paper points out that such holistic perspective in building projects provide...

Data Commercialisation: Extracting Value from Smart Buildings

Directory of Open Access Journals (Sweden)

Antti Säynäjoki

2017-11-01

Full Text Available The purpose of this paper is to explore the current state of data commercialisation and external distribution in the Finnish real estate and construction (REC sector. We focus on how companies could more effectively benefit from digitalisation, with more holistic utilisation of data from smart buildings. We assess the current state of data utilisation and distribution using a start-up company analysis and industry workshops. According to our research, the data from smart buildings is gathered on a large scale but very seldom distributed outside company borders. The reason for this almost non-existent external data distribution is the lack of value of the external data. As a solution, we propose the Internet of Buildings framework. The framework is based on a platform ecosystem model that is complemented with data commercialisation roles. It takes into account the current data-related opportunities and challenges in the sector. Within the framework, we suggest stakeholder roles and modes of interaction that promote value creation from smart building data. The framework can be used as a starting point for developing data commercialisation and external data distribution in the sector.

Indoor-Outdoor Air Leakage of Apartments and Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

Price, P.N.; Shehabi, A.; Chan, R.W.; Gadgil, A.J.

2006-06-01

We compiled and analyzed available data concerning indoor-outdoor air leakage rates and building leakiness parameters for commercial buildings and apartments. We analyzed the data, and reviewed the related literature, to determine the current state of knowledge of the statistical distribution of air exchange rates and related parameters for California buildings, and to identify significant gaps in the current knowledge and data. Very few data were found from California buildings, so we compiled data from other states and some other countries. Even when data from other developed countries were included, data were sparse and few conclusive statements were possible. Little systematic variation in building leakage with construction type, building activity type, height, size, or location within the u.s. was observed. Commercial buildings and apartments seem to be about twice as leaky as single-family houses, per unit of building envelope area. Although further work collecting and analyzing leakage data might be useful, we suggest that a more important issue may be the transport of pollutants between units in apartments and mixed-use buildings, an under-studied phenomenon that may expose occupants to high levels of pollutants such as tobacco smoke or dry cleaning fumes.

105-C Building characterization survey data report

International Nuclear Information System (INIS)

Miller, R.L.

1997-01-01

This report is a compilation of the 105-C Facility Characterization Survey data collected during the period of July 1, 1994, through September 30, 1994. The scope of the report is limited to the characterization of the 105-C Facility and surrounding site. Conclusions and recommendations regarding courses of future action are beyond the scope of this report. The survey data in this report reflects the current conditions and status of the 105-C Building, and is intended to be used in support of future decontamination and decommissioning activities. The survey was organized and implemented to evaluate the four parameters relating to the current condition of the facility. These parameters concern the physical conditions of the 105-C Building from a personnel safety standpoint; the radiological status throughout the building; identification of the hazardous materials located in the building; and identification of subsurface obstacles left in the path of proposed excavations

Development of a building sump database for the Y-12 Plant, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Sepanski, R.J.; Field, S.M.

1997-07-01

Operations at the Oak Ridge Y-12 Plant have resulted in contamination of Upper East Fork Poplar Creek (UEFPC) and shallow groundwater through soil erosion, infiltration, and outfall discharges. The contamination of groundwater has been documented for nearly two decades, largely through well monitoring efforts. This study represents the first effort to formally identify and compile location data on sumps at the Y-12 Plant, several of which are known or are suspected to pump groundwater. Operation of several of these sumps have been documented to affect groundwater hydraulics and contaminant pathways. This report presents preliminary results of an investigation attempting to identify sources of data on building sumps that have not previously been incorporated into existing Y-12 Plant groundwater databases. This investigation involved acquiring information on building sumps, such as location, building number, water source, discharge location, and availability of analytical data. This information was used to construct an ARC/INFO database capable of simultaneously storing spatial data on sump locations and attribute information concerning the operation of individual building sumps. This database will be referred to hereafter as the Y-12 Plant Building Sump Database

Market attractiveness Energy Performance Certificate for Buildings. Analysis of the survey results. Country report for the Netherlands

International Nuclear Information System (INIS)

Wobben, M.M.H.; Hoogelander, K.J.; Schorel, J.S.; Corpeleijn, M.F.; Hezelmans, A.; Verhoef, L.A.

2006-09-01

The STABLE project aims at launching a collaborative effort of national energy agencies and federations of building owners in order to establish a firm basis for market acceptance of building energy certification as defined in the Directive on the Energy Performance of Buildings. This report presents the results of a survey for the Netherlands. [nl

Hypothesis-based research on the causes of sick building symptoms: A design for Phases 2 and 3 of the California Healthy Building Study

Energy Technology Data Exchange (ETDEWEB)

Fisk, W.J.; Hodgson, A.T.; Daisey, J.M.; Faulkner, D. [Lawrence Berkeley Lab., CA (United States); Macher, J.M. [California Dept. of Health Services, Berkeley, CA (United States). Air and Industrial Hygiene Lab.; Mendell, M.J. [National Inst. for Occupational Safety and Health, Cincinnati, OH (United States). Industrywide Studies Branch

1992-07-01

The California Healthy Building Study (CHBS) is a multidisciplinary research based in 12 office buildings within California. The overall goal the CHBS is to elucidate relationships between occurrences of office worker health symptoms and characteristics of the workers` buildings, ventilation systems, work spaces, jobs, and indoor environments. A Phase-1 study was completed during 1990. The California Institute for Energy Efficiency (CIEE), through its Exploratory Research Program, supported the design of research plans for two future phases of the CHBS. The intent of the CIEE-supported effort was to design research to be conducted in the Phase-1 buildings that capitalizes on the Phase-1 research findings and also on recently-published results of research from other institutions. This report describes the research plans developed with CIEE support and presents the rationale for these research plans.

Hypothesis-based research on the causes of sick building symptoms: A design for Phases 2 and 3 of the California Healthy Building Study

Energy Technology Data Exchange (ETDEWEB)

Fisk, W.J.; Hodgson, A.T.; Daisey, J.M.; Faulkner, D. (Lawrence Berkeley Lab., CA (United States)); Macher, J.M. (California Dept. of Health Services, Berkeley, CA (United States). Air and Industrial Hygiene Lab.); Mendell, M.J. (National Inst. for Occupational Safety and Health, Cincinnati, OH (United States). Industrywide Studies Branch)

1992-07-01

The California Healthy Building Study (CHBS) is a multidisciplinary research based in 12 office buildings within California. The overall goal the CHBS is to elucidate relationships between occurrences of office worker health symptoms and characteristics of the workers' buildings, ventilation systems, work spaces, jobs, and indoor environments. A Phase-1 study was completed during 1990. The California Institute for Energy Efficiency (CIEE), through its Exploratory Research Program, supported the design of research plans for two future phases of the CHBS. The intent of the CIEE-supported effort was to design research to be conducted in the Phase-1 buildings that capitalizes on the Phase-1 research findings and also on recently-published results of research from other institutions. This report describes the research plans developed with CIEE support and presents the rationale for these research plans.

Building consensus on youth violence prevention and citizen ...

International Development Research Centre (IDRC) Digital Library (Canada)

IDRC's efforts in negotiation and coalition building contributed to a high-level dialogue that engaged high-level officials and reaffirmed their commitment to preventing violence particularly among youth in Central America. At a meeting held at the Earth University in Costa Rica´s Limon Province in early February, Luis Fallas, ...

Current practice and developmental efforts for leak detection in US reactor primary systems

International Nuclear Information System (INIS)

Kupperman, D.S.; Claytor, T.N.

1985-07-01

Current leak detection practices in 74 operating nuclear reactors have been reviewed. Existing leak detection systems are adequate to ensure a leak-before-break scenario in most situations, but no currently available, single method combines optimal leakage detection sensitivity, leak-locating ability, and leakage measurement accuracy. Simply tightening current leakage limits may produce an unacceptably large number of unnecessary shutdowns. The use of commercially available acoustic monitoring systems or moisture-sensitive tape may improve leak detection capability at specific sites. However, neither of these methods currently provides source discrimination (e.g., to distinguish between leaks from pipe cracks and valves) or leak-rate information (a small leak may saturate the system). A field-implementable acoustic leak detection system is being developed to address these limitations. 5 refs., 3 figs

Group facilitation: building that winning team.

Science.gov (United States)

Krumberger, J M

1992-12-01

Team building does not occur by chance; it involves using techniques to make it easier for members to contribute their expertise while working with others to achieve quality results. Evaluation of team effectiveness involves assessing both the processes (team interactions and work processes) and accomplishment of goals (out-comes; see box). Productivity and quality that could not be accomplished by individual efforts may be enhanced by effectively working teams.

Full-scale Dynamic Testing of Soft-Story Retrofitted and Un-Retrofitted Woodframe Buildings

Science.gov (United States)

John W. van de Lindt; George T. Abell; Pouria Bahmani; Mikhail Gershfeld; Xiaoyun Shao; Weichiang Pang; Michael D. Symans; Ershad Ziaei; Steven E. Pryor; Douglas Rammer; Jingjing Tian

2013-01-01

The existence of thousands of soft-story woodframe buildings in California has been recognized as a disaster preparedness problem with concerted mitigation efforts underway in many cities throughout the state. The vast majority of those efforts are based on numerical modeling, often with half-century old data in which assumptions have to be made based on best...

Seismic isolation retrofitting of the Salt Lake City and County Building

International Nuclear Information System (INIS)

Bailey, J.; Allen, E.

1989-01-01

The City and County Building, a massive unreinforced masonry structure completed in 1894, has been seismically retrofitted using base isolation. The isolation system consists of 443 lead-rubber isolators installed underneath the building on top of existing spread footings. The building is isolated from the surrounding ground by a perimeter moat wall, permitting lateral movement to take place during an earthquake. It is believed that this is the first historic structure in the world to be retrofitted against possible seismic damage using base isolation. Lessons learned in this design effort are potentially applicable to seismic base isolation for nuclear power plants

Amelioration and retrofitting of educational buildings

Science.gov (United States)

Casciati, Fabio; Casciati, Sara

2018-01-01

Following a seismic event that occurred years ago in Central Italy, the public opinion was growing and growing a concern on the adequacy of educational buildings all across Italy. This activated several political decisions and a consequent technical effort is in progress. Technically speaking one has to manage the classical problem of retrofitting existing buildings. However, the legal environment goes across national codes, targeted guidelines and the professional need of achieving pragmatic solutions based on ethical and social acceptation schemes.This paper introduces the topic in its worldwide exception and focuses then on some operative aspects in the Italian situation. It outlines the consolidated steps along this technical process and emphasizes the weak aspects one meets when going across the designers' reports.

Simulation for (sustainable) building design: Czech experiences

NARCIS (Netherlands)

Bartak, M.; Drkal, F.; Hensen, J.L.M.; Lain, M.; Schwarzer, J.; Sourek, B.

2001-01-01

This paper attempts to outline the current state-of-the-art in the Czech Republic regarding the use of integrated building performance simulation as a design tool. Integrated performance simulation for reducing the environmental impact of buildings is illustrated by means of three recent HVAC

Evaluation of Water Efficiency in Green Building in Taiwan

Directory of Open Access Journals (Sweden)

Cheng-Li Cheng

2016-06-01

Full Text Available Low carbon policies, including those aimed at increasing water efficiency, have been adopted as a crucial strategy for combating global warming and climate change. The green building evaluation system used in Taiwan was first applied in 1999 and initially utilized a building’s water efficiency as the threshold index for determining the building’s environmental impact. Since 1999, more than a thousand buildings have been certified as green buildings using this evaluation system. The quantitative effects of water conservation efforts should be provided to policy makers as a form of positive feedback. To that end, the present study offers a calculation process for estimating the quantitative volume of water saved by practical green buildings. The baseline water usage for all kinds of buildings was determined to serve as the criterion for determining the water-saving efficiency of individual buildings. An investigation of the average water-saving rate from 2000 to 2013 for 1320 buildings certified as green buildings was also conducted to validate the estimation results and found that these green buildings saved an average of approximately 37.6% compared to the baseline water usage rate for all buildings. Water savings will inevitably follow from the use of water-saving appliances or water-saving designs for buildings. The proposed calculation process can be used to clarify the relationships between specific water-saving concepts and the real water usage efficiency of green buildings.

Model-based and model-free “plug-and-play” building energy efficient control

International Nuclear Information System (INIS)

Baldi, Simone; Michailidis, Iakovos; Ravanis, Christos; Kosmatopoulos, Elias B.

2015-01-01

Highlights: • “Plug-and-play” Building Optimization and Control (BOC) driven by building data. • Ability to handle the large-scale and complex nature of the BOC problem. • Adaptation to learn the optimal BOC policy when no building model is available. • Comparisons with rule-based and advanced BOC strategies. • Simulation and real-life experiments in a ten-office building. - Abstract: Considerable research efforts in Building Optimization and Control (BOC) have been directed toward the development of “plug-and-play” BOC systems that can achieve energy efficiency without compromising thermal comfort and without the need of qualified personnel engaged in a tedious and time-consuming manual fine-tuning phase. In this paper, we report on how a recently introduced Parametrized Cognitive Adaptive Optimization – abbreviated as PCAO – can be used toward the design of both model-based and model-free “plug-and-play” BOC systems, with minimum human effort required to accomplish the design. In the model-based case, PCAO assesses the performance of its control strategy via a simulation model of the building dynamics; in the model-free case, PCAO optimizes its control strategy without relying on any model of the building dynamics. Extensive simulation and real-life experiments performed on a 10-office building demonstrate the effectiveness of the PCAO–BOC system in providing significant energy efficiency and improved thermal comfort. The mechanisms embedded within PCAO render it capable of automatically and quickly learning an efficient BOC strategy either in the presence of complex nonlinear simulation models of the building dynamics (model-based) or when no model for the building dynamics is available (model-free). Comparative studies with alternative state-of-the-art BOC systems show the effectiveness of the PCAO–BOC solution

Pioneering efforts to control AIDS. Review: IHO.

Science.gov (United States)

Chatterji, A; Sehgal, K

1995-01-01

The Indian Health Organisation (IHO) is a nongovernmental organization based in Bombay with more than 12 years experience in HIV/AIDS prevention and control efforts. It has attacked ignorance and prejudice via communication efforts. IHO has created a bond with some hospital systems of Bombay. IHO disseminated information about HIV/AIDS in Bombay's red light districts and has bridged the gap between the city's medical establishment and the community most in need. IHO's aggressive street-level fighting in a sector replete with sensitive issues has somewhat isolated it from mainstream national NGOs involved in HIV/AIDS education and control as well as from the medical establishment and potential partners. IHO funds have been reduced, forcing IHO to reduce intervention programs and responses to field demands. It suffers from a high rate of turnover among middle management staff. IHO's chief advantage is its confidence gained over the past 12 years. IHO has clearly delineated the direction it wants to go: care and support programs for persons affected by HIV/AIDS and for commercial sex workers to allow them to quit prostitution, orphan care, and development of training institutions for the education and motivation of medical personnel on HIV/AIDS care and prevention. It plans to build a hospice for AIDS patients and orphans and a training center. Training activities will vary from one-week orientation programs to three-month certificate courses for medical workers, NGOs, and managers from the commercial sector. IHO is prepared to share its experiences in combating HIV/AIDS in Bombay in a team effort. As official and bilateral funding has been decreasing, IHO has targeted industry for funding. Industry has responded, which enables IHO to sustain its core programs and approaches. IHO observations show a decrease in the number of men visiting red-light districts. IHO enjoys a positive relationship with Bombay's media reporting on AIDS.

The RBANS Effort Index: base rates in geriatric samples.

Science.gov (United States)

Duff, Kevin; Spering, Cynthia C; O'Bryant, Sid E; Beglinger, Leigh J; Moser, David J; Bayless, John D; Culp, Kennith R; Mold, James W; Adams, Russell L; Scott, James G

2011-01-01

The Effort Index (EI) of the RBANS was developed to assist clinicians in discriminating patients who demonstrate good effort from those with poor effort. However, there are concerns that older adults might be unfairly penalized by this index, which uses uncorrected raw scores. Using five independent samples of geriatric patients with a broad range of cognitive functioning (e.g., cognitively intact, nursing home residents, probable Alzheimer's disease), base rates of failure on the EI were calculated. In cognitively intact and mildly impaired samples, few older individuals were classified as demonstrating poor effort (e.g., 3% in cognitively intact). However, in the more severely impaired geriatric patients, over one third had EI scores that fell above suggested cutoff scores (e.g., 37% in nursing home residents, 33% in probable Alzheimer's disease). In the cognitively intact sample, older and less educated patients were more likely to have scores suggestive of poor effort. Education effects were observed in three of the four clinical samples. Overall cognitive functioning was significantly correlated with EI scores, with poorer cognition being associated with greater suspicion of low effort. The current results suggest that age, education, and level of cognitive functioning should be taken into consideration when interpreting EI results and that significant caution is warranted when examining EI scores in elders suspected of having dementia.

Factor Analysis on Criteria Affecting Lean Retrofit for Energy Efficient Initiatives in Higher Learning Institution Buildings

Directory of Open Access Journals (Sweden)

Abidin Nur IzieAdiana

2017-01-01

Full Text Available The expansion of Higher Learning Institution (HLI is a global concerns on energy demand due to campus act like a small city. Intensive mode of operation of a building is correlated to the energy utilization. Improvement in the current energy efficiency is crucial effort to minimize the environmental effect through minimisation of energy in operation by retrofitting and upgrade the existing building system or components to be more efficient. Basically, there are three recommended steps for the improvement known as lean initiatives, green technology and clean energy in response to becoming zero energy solutions for building. The deliberation of this paper is aimed to highlight the criteria affecting in retrofitting of existing building in HLI with lean initiatives in order to achieve energy efficiency and reduction of energy comsumption. Attention is devoted to reviewing the lean energy retrofitting initiatives criteria for daylighting (side lighting, daylighting (skylight and glazing. The questionnaire survey was employed and distributed to the architects who has an expertise in green building design. Factor analysis was adopted as a method of analysis by using Principal Component with Varimax Rotation. The result is presented through summarizing the sub-criteria according to its importance with a factor loading 0.50 and above. The result found that majority of the criteria developed achieved the significant factor loading value and in accordance with the protocal of analysis. In conclusion the results from analysis of this paper assists the stakeholders in assessing the significant criteria based on the desired lean energy retrofitting initiatives and also provides a huge contribution for future planning improvement in existing buildings to become an energy efficient building.

The Dutch sustainable building policy: A model for developing countries?

Energy Technology Data Exchange (ETDEWEB)

Melchert, Luciana [Faculty of Architecture and Urbanism, University of Sao Paulo, Rua do Lago, 876, CEP 05508.900, Sao Paulo SP (Brazil)

2007-02-15

This article explores the institutionalization of environmental policies in the Dutch building sector and the applicability of the current model to developing countries. First, it analyzes the transition of sustainable building practices in the Netherlands from the 1970s until today, exploring how these were originally embedded in a discourse on 'de-modernization', which attempted to improve the environmental performance of building stocks by means of self-sufficient technologies, whereas nowadays they adopt a framework of 'ecological modernization', with integrative approaches seeking to improve the environmental performance of building stocks through more efficient-rather than self-sufficient-technologies. The study subsequently shows how the current Dutch sustainable building framework has thereby managed to achieve a pragmatic and widely accepted rationale, which can serve to orient the ecological restructuring of building stocks in developing countries. (author)

Technology Solutions Case Study: Design Guidance for Passive Vents in New Construction, Multifamily Buildings

Energy Technology Data Exchange (ETDEWEB)

None

2016-02-12

In an effort to improve indoor air quality in high-performance, new construction, multifamily buildings, dedicated sources of outdoor air are being implemented. Passive vents are being selected by some design teams over other strategies because of their lower first costs and operating costs. The U.S. Department of Energy’s Building America research team Consortium for Advanced Residential Buildings constructed eight steps, which outline the design and commissioning required for these passive vents to perform as intended.

ANALYSIS RESULTS FOR BUILDING 241 702-AZ A TRAIN

International Nuclear Information System (INIS)

DUNCAN JB; FRYE JM; COOKE CA; LI SW; BROCKMAN FJ

2006-01-01

This report presents the analyses results for three samples obtained under RPP-PLAN-28509, Sampling and Analysis Plan for Building 241 702-AZ A Train. The sampling and analysis was done in response to problem evaluation request number PER-2004-6139, 702-AZ Filter Rooms Need Radiological Cleanup Efforts

ANALYSIS RESULTS FOR BUILDING 241 702-AZ A TRAIN

Energy Technology Data Exchange (ETDEWEB)

DUNCAN JB; FRYE JM; COOKE CA; LI SW; BROCKMAN FJ

2006-12-13

This report presents the analyses results for three samples obtained under RPP-PLAN-28509, Sampling and Analysis Plan for Building 241 702-AZ A Train. The sampling and analysis was done in response to problem evaluation request number PER-2004-6139, 702-AZ Filter Rooms Need Radiological Cleanup Efforts.

Promoting Healthy Workplaces by Building Cultures of Health and Applying Strategic Communications.

Science.gov (United States)

Kent, Karen; Goetzel, Ron Z; Roemer, Enid C; Prasad, Aishwarya; Freundlich, Naomi

2016-02-01

The aim of the study was to identify key success elements of employer-sponsored health promotion (wellness) programs. We conducted an updated literature review, held discussions with subject matter experts, and visited nine companies with exemplary programs to examine current best and promising practices in workplace health promotion programs. Best practices include establishing a culture of health and using strategic communications. Key elements that contribute to a culture of health are leadership commitment, social and physical environmental support, and employee involvement. Strategic communications are designed to educate, motivate, market offerings, and build trust. They are tailored and targeted, multichanneled, bidirectional, with optimum timing, frequency, and placement. Increased efforts are needed to disseminate lessons learned from employers who have built cultures of health and excellent communications strategies and apply these insights more broadly in workplace settings.

After Disaster: the role of surveying in the assessment of building ...

African Journals Online (AJOL)

such as war bombardment, terrorist bomb attacks, etc) always leave building infrastructure in their wake destroyed or destabilized to a certain degree. The cost of subsequent recovery efforts can be minimized by rehabilitating as much as ...

Green roofs and the LEED green building rating system

Energy Technology Data Exchange (ETDEWEB)

Kula, R. [Sustainable Solutions Inc., Wagoner, OK (United States)

2005-07-01

The sustainable building industry is becoming increasingly aware of the host of public and private benefits that green roofs can provide in built environments. In dense urban environments, green roofs function to reduce stormwater runoff, urban heat island effects, and particulate matter (PM) pollution. The emerging green roof industry is now poised to support the efforts of green building networks in North America. This paper discussed the general benefits of green roofs, and their recognition within the Leadership in Energy and Environmental Design (LEED) Green Building Rating System. A case study of Mountain Equipment Co-op's Winnipeg site was presented. The building's green roof was directly responsible for earning 5 credits and contributing to the achievement of an additional 2 credits under the LEEDS certification process. Credits were earned for reduced site disturbance; landscape design to reduce heat islands; and water efficiency. The green roof at the site provided the vast majority of the building's cooling needs through an evaporative cooling trough. A photovoltaic pump was used to feed the building's irrigation system, as well as to pump ground water through cooling valances. It was concluded that the rise of sustainable building practices and the LEED Green Building Rating System will revolutionize the way new buildings are constructed.

Typology of building shading elements on Jalan Sudirman corridor in Pekanbaru

Science.gov (United States)

Faisal, G.; Aldy, P.

2016-04-01

In 2013, temperature in Pekanbaru was between 22.60°C and 34.6°C with humidity 79.14 percent. This condition has increase the concern of energy utilization to building comfort. Buildings have the biggest energy consuming due to the use of air conditioner in Pekanbaru. One effort to reduced energy is shading devices application. Application of air conditioner need huge energy, replaced natural circulation with architecture elements to reduced building thermal. This research study about system and building shading devices types that influence building thermal in Pekanbaru so that knowing characteristics and elements form. This study aims to determine and identify of systems and building elements types in Pekanbaru, which the element forms to conquer in climate condition. Qualitative method with rationalistic-paradigm has used to identify typology of building shading devices on Jalan Sudirman corridor. The research orientation on typology theory, thermal theory, and building shading device to identification of building shading device types on Jalan Sudirman corridor. Based on the survey result, there are 2 type of building shading devices on Jalan Sudirman Pekanbaru which is based on forms and quantity of shading. The types are building shading devices based on shading quantity and building shading devices based on shading forms.

Run-time coupling advanced control software with building simulation environment

NARCIS (Netherlands)

Yahiaoui, A.; Hensen, J.L.M.; Soethout, L.L.; Hensen, J.L.M.; Lain, M.

2004-01-01

The use of advanced control technologies and intelligence in buildings and infrastructure could make the current high performance system much more efficient and reliable. The integration of advanced control strategies into the building will certainly produce significant results for better building

Energy retrofit of an office building by substitution of the generation system: performance evaluation via dynamic simulation versus current technical standards

International Nuclear Information System (INIS)

Testi, D; Schito, E; Grassi, W; Menchetti, E

2014-01-01

Constructions built in Italy before 1945 (about 30% of the total built stock) feature low energy efficiency. Retrofit actions in this field can lead to valuable energetic and economic savings. In this work, we ran a dynamic simulation of a historical building of the University of Pisa during the heating season. We firstly evaluated the energy requirements of the building and the performance of the existing natural gas boiler, validated with past billings of natural gas. We also verified the energetic savings obtainable by the substitution of the boiler with an air-to-water electrically-driven modulating heat pump, simulated through a cycle-based model, evaluating the main economic metrics. The cycle-based model of the heat pump, validated with manufacturers' data available only at specified temperature and load conditions, can provide more accurate results than the simplified models adopted by current technical standards, thus increasing the effectiveness of energy audits

From Compliance to Service: Evolving the State Role to Support District Data Efforts to Improve Student Achievement. Summary

Science.gov (United States)

Data Quality Campaign, 2011

2011-01-01

As a result of state, national and federal leadership and political will, states have dramatically increased their capacity to collect robust longitudinal education data. However, without an equally ambitious effort to ensure access and build stakeholders' capacity to use data to increase student achievement, these infrastructure investments…

National Green Building Standard Analysis

Energy Technology Data Exchange (ETDEWEB)

none,

2012-07-01

DOE's Building America Program is a research and development program to improve the energy performance of new and existing homes. The ultimate goal of the Building America Program is to achieve examples of cost-effective, energy efficient solutions for all U.S. climate zones. Periodic maintenance of an ANSI standard by review of the entire document and action to revise or reaffirm it on a schedule not to exceed five years is required by ANSI. In compliance, a consensus group has once again been formed and the National Green Building Standard is currently being reviewed to comply with the periodic maintenance requirement of an ANSI standard.

Termination of the Special Metallurgical (SM) Building at Mound Laboratory: a final report

International Nuclear Information System (INIS)

Harris, W.R.; Kokenge, B.R.; Marsh, G.C.

1976-01-01

The report describes and highlights the more important factors associated with the termination of the Special Metallurgical (SM) Building at Mound Laboratory. As a result, a written record of the more important techniques and procedures is now available for reference by others involved in similar termination efforts. Included in this report is a description of the organizational units that were used in this effort along with a description of their responsibilities. A general description of the SM Building and a discussion of the more relevant procedures and equipment that were used are also presented. In addition, pertinent Health Physics information, such as personnel exposure, final wipe levels in the terminated facility, and assays of the structure, are provided. Based on the experience gained from this project, recommendations were made regarding the design of future radioactive material handling facilities so that when they are ultimately terminated the effort can be accomplished more efficiently

Does brand building matter? A study of the bacalhau brand Dybvik

OpenAIRE

Aure, Kristin Gaaseide; Nervik, Kristine; Helgesen, Øyvind

2017-01-01

Brand building results in brand equity creation based on intellectual efforts. Thus brand equity is perceived as intellectual capital of the brand builder. Building strong brands has become a priority for many organizations, with the presumption that increased brand equity yields advantages such as customers’ increased willingness to pay a price premium. This paper addresses the brand Dybvik (salted and dried cod/bacalhau/«clip-fish»). A survey was conducted in order to answer the following r...

IDES-EDU – new interdisciplinary education program for Sustainable Buildings

DEFF Research Database (Denmark)

Dvorakova, Pavla; Kabele, Karel; Brunsgaard, Camilla

2013-01-01

Buildings fulfilling all requirements related to energy, economy and environment are necessary to be designed by interdisciplinary teams with efficient transfer of information and good knowledge base. IDES EDU is a project co-funded by the Intelligent Energy Europe program in which 15 European...... universities make a concerted effort to develop and implement balanced master and postgraduate courses on Sustainable Energy Design providing skills and knowledge that exceed the requirements of the EPBD. The resulting courses focus on different aspects of sustainable building design from the perspective...

Self-regulating the effortful "social dos".

Science.gov (United States)

Cortes, Kassandra; Kammrath, Lara K; Scholer, Abigail A; Peetz, Johanna

2014-03-01

In the current research, we explored differences in the self-regulation of the personal dos (i.e., engaging in active and effortful behaviors that benefit the self) and in the self-regulation of the social dos (engaging in those same effortful behaviors to benefit someone else). In 6 studies, we examined whether the same trait self-control abilities that predict task persistence on personal dos would also predict task persistence on social dos. That is, would the same behavior, such as persisting through a tedious and attentionally demanding task, show different associations with trait self-control when it is framed as benefitting the self versus someone else? In Studies 1-3, we directly compared the personal and social dos and found that trait self-control predicted self-reported and behavioral personal dos but not social dos, even when the behaviors were identical and when the incentives were matched. Instead, trait agreeableness--a trait linked to successful self-regulation within the social domain--predicted the social dos. Trait self-control did not predict the social dos even when task difficulty increased (Study 4), but it did predict the social don'ts, consistent with past research (Studies 5-6). The current studies provide support for the importance of distinguishing different domains of self-regulated behaviors and suggest that social dos can be successfully performed through routes other than traditional self-control abilities. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

Effort sharing in ambitious, global climate change mitigation scenarios

International Nuclear Information System (INIS)

Ekholm, Tommi; Soimakallio, Sampo; Moltmann, Sara; Hoehne, Niklas; Syri, Sanna; Savolainen, Ilkka

2010-01-01

The post-2012 climate policy framework needs a global commitment to deep greenhouse gas emission cuts. This paper analyzes reaching ambitious emission targets up to 2050, either -10% or -50% from 1990 levels, and how the economic burden from mitigation efforts could be equitably shared between countries. The scenarios indicate a large low-cost mitigation potential in electricity and industry, while reaching low emission levels in international transportation and agricultural emissions might prove difficult. The two effort sharing approaches, Triptych and Multistage, were compared in terms of equitability and coherence. Both approaches produced an equitable cost distribution between countries, with least developed countries having negative or low costs and more developed countries having higher costs. There is, however, no definitive solution on how the costs should be balanced equitably between countries. Triptych seems to be yet more coherent than other approaches, as it can better accommodate national circumstances. Last, challenges and possible hindrances to effective mitigation and equitable effort sharing are presented. The findings underline the significance of assumptions behind effort sharing on mitigation potentials and current emissions, the challenge of sharing the effort with uncertain future allowance prices and how inefficient markets might undermine the efficiency of a cap-and-trade system.

Effort sharing in ambitious, global climate change mitigation scenarios

Energy Technology Data Exchange (ETDEWEB)

Ekholm, Tommi [TKK Helsinki University of Technology, Espoo (Finland); Soimakallio, Sampo; Syri, Sanna; Savolainen, Ilkka [VTT Technical Research Centre of Finland, P.O. Box 1000, FIN-02044 VTT (Finland); Moltmann, Sara; Hoehne, Niklas [Ecofys Germany GmbH, Cologne (Germany)

2010-04-15

The post-2012 climate policy framework needs a global commitment to deep greenhouse gas emission cuts. This paper analyzes reaching ambitious emission targets up to 2050, either or from 1990 levels, and how the economic burden from mitigation efforts could be equitably shared between countries. The scenarios indicate a large low-cost mitigation potential in electricity and industry, while reaching low emission levels in international transportation and agricultural emissions might prove difficult. The two effort sharing approaches, Triptych and Multistage, were compared in terms of equitability and coherence. Both approaches produced an equitable cost distribution between countries, with least developed countries having negative or low costs and more developed countries having higher costs. There is, however, no definitive solution on how the costs should be balanced equitably between countries. Triptych seems to be yet more coherent than other approaches, as it can better accommodate national circumstances. Last, challenges and possible hindrances to effective mitigation and equitable effort sharing are presented. The findings underline the significance of assumptions behind effort sharing on mitigation potentials and current emissions, the challenge of sharing the effort with uncertain future allowance prices and how inefficient markets might undermine the efficiency of a cap-and-trade system. (author)

Using posts to an online social network to assess fishing effort

Science.gov (United States)

Martin, Dustin R.; Chizinski, Christopher J.; Eskridge, Kent M.; Pope, Kevin L

2014-01-01

Fisheries management has evolved from reservoir to watershed management, creating a need to simultaneously gather information within and across interacting reservoirs. However, costs to gather information on the fishing effort on multiple reservoirs using traditional creel methodology are often prohibitive. Angler posts about reservoirs online provide a unique medium to test hypotheses on the distribution of fishing pressure. We show that the activity on an online fishing social network is related to fishing effort and can be used to facilitate management goals. We searched the Nebraska Fish and Game Association Fishing Forum for all references from April 2009 to December 2010 to 19 reservoirs that comprise the Salt Valley regional fishery in southeastern Nebraska. The number of posts was positively related to monthly fishing effort on a regional scale, with individual reservoirs having the most annual posts also having the most annual fishing effort. Furthermore, this relationship held temporally. Online fishing social networks provide the potential to assess effort on larger spatial scales than currently feasible.

Creating lift versus building the base : Current trends in marketing dynamics

NARCIS (Netherlands)

Leeflang, P.S.H.; Bijmolt, T.H.A.; van Doorn, J.; Hanssens, D.M.; van Heerde, H.J.; Verhoef, P.C.; Wieringa, J.E.

Markets are dynamic by nature; and marketing-efforts can be directed to stimulate, reduce, or to utilize these dynamics. The field of marketing dynamics aims at modeling the effects of marketing actions and policies on short-term performance ("lift") and on long-term performance ("base"). One of the

The Final Demise Of East Tennessee Technology Park Building K-33

International Nuclear Information System (INIS)

King, David A.

2011-01-01

Building K-33 was constructed in 1954 as the final section of the five-stage uranium enrichment cascade at the Oak Ridge Gaseous Diffusion Plant (ORGDP). The two original building (K-25 and K-27) were used to produce weapons grade highly enriched uranium (HEU). Building K-29, K-31, and K-33 were added to produce low enriched uranium (LEU) for nuclear power plant fuel. During ORGDP operations K-33 produced a peak enrichment of 2.5%. Thousands of tons of reactor tails fed into gaseous diffusion plants in the 1950s and early 1960s introducing some fission products and transuranics. Building K-33 was a two-story, 25-meters (82-feet) tall structure with approximately 30 hectare (64 acres) of floor space. The Operations (first) Floor contained offices, change houses, feed vaporization rooms, and auxiliary equipment to support enrichment operations. The Cell (second) Floor contained the enrichment process equipment and was divided into eight process units (designated K-902-1 through K-902-8). Each unit contained ten cells, and each cell contained eight process stages (diffusers) for a total of 640 enrichment stages. 1985: LEU buildings were taken off-line after the anticipated demand for uranium enrichment failed to materialize. 1987: LEU buildings were placed in permanent shutdown. Process equipment were maintained in a shutdown state. 1997: DOE signed an Action Memorandum for equipment removal and decontamination of Buildings K-29, K-31, K-33; BNFL awarded contract to reindustrialize the buildings under the Three Buildings D and D and Recycle Project. 2002: Equipment removal complete and effort shifts to vacuuming, chemical cleaning, scabbling, etc. 2005: Decontamination efforts in K-33 cease. Building left with significant 99 Tc contamination on metal structures and PCB contamination in concrete. Uranium, transuranics, and fission products also present on building shell. 2009: DOE targets Building K-33 for demolition. 2010: ORAU contracted to characterize Building K-33

Green buildings for Egypt: a call for an integrated policy

Science.gov (United States)

Bampou, P.

2017-11-01

As global warming is on the threshold of each country worldwide, Middle East and North African (MENA) region has already adopted energy efficiency (EE) policies on several consuming sectors. The present paper valuates the impact of temperature increase in the residential building sector of Egypt that is the most integrated example of the 7 out of the 20 MENA countries that have started their green efforts upon building environment. Furthermore, as it is based on a literature research upon socio-economic characteristics, existing building stock, existing legal and institutional framework, it elaborates a quantitative evaluation of Egypt's energy-saving potential, outlining basic constraints upon energy conservation, in order for Egypt to be able to handle the high energy needs due to its warm climate. Last but not least, the paper proposes a policy pathway for the implementation of green building codes and concludes with the best available technologies to promote EE in the Egyptian building sector.

Leveraging organizational dynamics in buildings to change behavior

Science.gov (United States)

Hewitt, Elizabeth L.

Buildings may be stationary, but they are not static; they are dynamic and active collectives of agents and actors, and play an important cultural and social role in shaping norms and influencing outcomes in the built environment. This research develops and applies a unique framework that conceptualizes the urban multifamily residential building as an organization, and seeks to use this lens to better understand the role of organizational characteristics in influencing energy efficiency in buildings. This work finds that an organizational analogy is a fruitful approach for understanding buildings, and that buildings in many ways can and do function successfully as organizations. In particular, eight organizational characteristics are explored here that extend well to buildings. These eight organizational characteristics are also explored more deeply to support an argument that some buildings have an organizational advantage that well positions them to undertake energy efficiency initiatives. One organizational characteristic -- the ownership type of the building -- is determined to be particularly important in driving energy outcomes in multifamily buildings in New York City. In particular, it was found that cooperative buildings in the New York City housing market consume less energy citywide than other types of multifamily properties, holding all else equal. Conversely, it was also found that rental buildings tend to consume more energy citywide. Subsequent qualitative case study work in a small Brooklyn cooperative building offers a deeper understanding of organizational decentralization and its role in driving decision-making and outcomes in the building. Additional comparative work in two rental properties -- one high-income and one low-income -- adds additional context and understanding to economic considerations such as the influence of income in overriding centralized efforts to operate the building efficiently. Ultimately, this research develops an analogy

A preliminary study on the relevancy of sustainable building design ...

African Journals Online (AJOL)

This preliminary study aims to explore the relationship between sustainable building design paradigms and commercial property depreciation, to assist in the understanding of sustainable building design impact towards commercial building value and rental de employs the qualitative method and analyses valuers' current ...

STRENGTHENING OF TRENCH COVER PLATES FOR SWITCHGEAR BUILDING

International Nuclear Information System (INIS)

M.S. RUBEN

2000-01-01

The objective of this calculation is to strengthen the existing trench cover plates of the Electrical Switchgear Building (BLDG 5010) of the Exploratory Studies Facility. A remodeling effort will change the portion of the facility that has the trenches for electrical cables to a craft/shop area. The users of the building will be using a forklift in this area (Clark CGP 30 forklift with a capacity of 3 tons). The trench covers require strengthening to support the wheel loads from the forklift. The output of this calculation will be sketches revising the floor plate details of DWG YMP-025-1-7007-ST103,2. (Details 4 and 5)

BEPS redesign of 168 commercial buildings: summary report

Energy Technology Data Exchange (ETDEWEB)

Stoops, J.L.; Deringer, J.J.; Moreno, S.; Misuriello, H.P.

1984-05-01

The objective of this report is to present, in usable form, summary data from the Building Energy Performance Standards (BEPS) Phase II commercial buildings energy research conducted in 1978-1979. Summary data presented were obtained from two major research efforts: the BEPS Phase II Redesign experiment; and the related research on ASHRAE Standard 90-75R. The bulk of this report consists of data tabulations of key energy parameters for the 168 sample buildings, which were tabulated from computer-stored files of the 1978-1979 data. Two kinds of tabulations are included: numerical tabulations that extracted information from the computer-stored data base for the 168 sample buildings; and graphic presentations of the computer-generated data, plus data extracted from other sources. The intent is to provide a single data compendium of key energy-related factors from the 1978 redesign experiment and the associated 1978-1979 ASHRAE Standard 90-75R research. This report also supplements the information for which there was not space in the magazine articles. Thus, for some building types, additional analysis, comments, and data tabulations are included that could not be included in the articles because space was limited. These additional analysis items are not consistent across building types because both the energy conservation opportunities and the design strategies applied by the building designers varied considerably by building type. The chapters have been entered individually into EDB and ERA.

Comparison of cardiovascular response to combined static-dynamic effort, postprandial dynamic effort and dynamic effort alone in patients with chronic ischemic heart disease

International Nuclear Information System (INIS)

Hung, J.; McKillip, J.; Savin, W.; Magder, S.; Kraus, R.; Houston, N.; Goris, M.; Haskell, W.; DeBusk, R.

1982-01-01

The cardiovascular responses to combined static-dynamic effort, postprandial dynamic effort and dynamic effort alone were evaluated by upright bicycle ergometry during equilibrium-gated blood pool scintigraphy in 24 men, mean age 59 +/- 8 years, with chronic ischemic heart disease. Combined static-dynamic effort and the postprandial state elicited a peak cardiovascular response similar to that of dynamic effort alone. Heart rate, intraarterial systolic and diastolic pressures, rate-pressure product and ejection fraction were similar for the three test conditions at the onset of ischemia and at peak effort. The prevalence and extent of exercise-induced ischemic left ventricular dysfunction, ST-segment depression, angina pectoris and ventricular ectopic activity were also similar during the three test conditions. Direct and indirect measurements of systolic and diastolic blood pressure were highly correlated. The onset of ischemic ST-segment depression and angina pectoris correlated as strongly with heart rate alone as with the rate-pressure product during all three test conditions. The cardiovascular response to combined static-dynamic effort and to postprandial dynamic effort becomes more similar to that of dynamic effort alone as dynamic effort reaches a symptom limit. If significant ischemic and arrhythmic abnormalities are absent during symptom-limited dynamic exercise testing, they are unlikely to appear during combined static-dynamic or postprandial dynamic effort

Field building: lessons from the Robert Wood Johnson Foundation's anthology series.

Science.gov (United States)

Isaacs, Stephen L; Knickman, James R

2005-01-01

As editors of the Robert Wood Johnson Foundation's (RWJF's) anthology series, we have examined the entire range of the foundation's grant making since 1972. We found that the RWJF has enjoyed considerable success in building fields--from nurse practitioners to tobacco control to end-of-life care. The RWJF has done this by shaping fields as they were emerging, by adopting a wide-ranging "bear hug" approach, and by staying the course. The lessons from the RWJF's field-building efforts are relevant for both large and small foundations: Small funders can develop strategic plans aimed at building fields in their home state or locality.

Effort in Multitasking: Local and Global Assessment of Effort.

Science.gov (United States)

Kiesel, Andrea; Dignath, David

2017-01-01

When performing multiple tasks in succession, self-organization of task order might be superior compared to external-controlled task schedules, because self-organization allows optimizing processing modes and thus reduces switch costs, and it increases commitment to task goals. However, self-organization is an additional executive control process that is not required if task order is externally specified and as such it is considered as time-consuming and effortful. To compare self-organized and externally controlled task scheduling, we suggest assessing global subjective and objectives measures of effort in addition to local performance measures. In our new experimental approach, we combined characteristics of dual tasking settings and task switching settings and compared local and global measures of effort in a condition with free choice of task sequence and a condition with cued task sequence. In a multi-tasking environment, participants chose the task order while the task requirement of the not-yet-performed task remained the same. This task preview allowed participants to work on the previously non-chosen items in parallel and resulted in faster responses and fewer errors in task switch trials than in task repetition trials. The free-choice group profited more from this task preview than the cued group when considering local performance measures. Nevertheless, the free-choice group invested more effort than the cued group when considering global measures. Thus, self-organization in task scheduling seems to be effortful even in conditions in which it is beneficiary for task processing. In a second experiment, we reduced the possibility of task preview for the not-yet-performed tasks in order to hinder efficient self-organization. Here neither local nor global measures revealed substantial differences between the free-choice and a cued task sequence condition. Based on the results of both experiments, we suggest that global assessment of effort in addition to

Stakeholder Specific Multi-Scale Spatial Representation of Urban Building-Stocks

Directory of Open Access Journals (Sweden)

Magnus Österbring

2018-05-01

Full Text Available Urban building-stocks use a significant amount of resources and energy. At the same time, they have a large potential for energy efficiency measures (EEM. To support decision-making and planning, spatial building-stock models are used to examine the current state and future development of urban building-stocks. While these models normally focus on specific cities, generic and broad stakeholder groups such as planners and policy makers are often targeted. Consequently, the visualization and communication of results are not tailored to these stakeholders. The aim of this paper is to explore the possibilities of mapping and representing energy use of urban building-stocks at different levels of aggregation and spatial distributions, to communicate with specific stakeholders involved in the urban development process. This paper uses a differentiated building-stock description based on building-specific data and measured energy use from energy performance certificates for multi-family buildings (MFB in the city of Gothenburg. The building-stock description treats every building as unique, allowing results to be provided at any level of aggregation to suit the needs of the specific stakeholders involved. Calculated energy use of the existing stock is within 10% of the measured energy use. The potential for EEM in the existing stock is negated by the increased energy use due to new construction until 2035, using a development scenario based on current renovation rates and planned developments. Visualizations of the current energy use of the stock as well as the impact of renovation and new construction are provided, targeting specific local stakeholders.

Energy balance framework for Net Zero Energy buildings

Science.gov (United States)

Approaching a Net Zero Energy (NZE) building goal based on current definitions is flawed for two principal reasons - they only deal with energy quantities required for operations, and they do not establish a threshold, which ensures that buildings are optimized for reduced consum...

Armagh Observatory - Historic Building Information Modelling for Virtual Learning in Building Conservation

Science.gov (United States)

Murphy, M.; Chenaux, A.; Keenaghan, G.; GIbson, V..; Butler, J.; Pybusr, C.

2017-08-01

In this paper the recording and design for a Virtual Reality Immersive Model of Armagh Observatory is presented, which will replicate the historic buildings and landscape with distant meridian markers and position of its principal historic instruments within a model of the night sky showing the position of bright stars. The virtual reality model can be used for educational purposes allowing the instruments within the historic building model to be manipulated within 3D space to demonstrate how the position measurements of stars were made in the 18th century. A description is given of current student and researchers activities concerning on-site recording and surveying and the virtual modelling of the buildings and landscape. This is followed by a design for a Virtual Reality Immersive Model of Armagh Observatory use game engine and virtual learning platforms and concepts.

SERVIR Support to NSDI Efforts in Mesoamerica, Africa and the Himalayas

Science.gov (United States)

Delgado, Francisco

2014-01-01

SERVIR is a joint effort between NASA, USAID to build or improve capacities in developing regions to help adaptation to climate change by taking advantage of Earth Observation data for decision making. The project began in 2004, in Mesoamerica, partnering with the Central American Commission for Environment and Development(CCAD), the World Bank and CATHALAC. CATHALAC, located in Panama, serves as the regional hub for Mesoamerica since 2005. Two additional regional hubs have been established (in Easters & Western Africa - at RCMRD, Kenya, and The Himalayas- at ICIMOD, Nepal), and two more regional hubs are soon to be launched.

Making a difference: Ten case studies of DSM/IRP interactive efforts and related advocacy group activities

Energy Technology Data Exchange (ETDEWEB)

English, M.; Schexnayder, S.; Altman, J. [Tennessee Univ., Knoxville, TN (United States). Energy, Environment and Resources Center; Schweitzer, M. [Oak Ridge National Lab., TN (United States)

1994-03-01

This report discusses the activities of organizations that seek to promote integrated resource planning and aggressive, cost-effective demand-side management by utilities. The activities of such groups -- here called energy efficiency advocacy groups (EEAGs) -- are examined in ten detailed am studies. Nine of the cases involve some form of interactive effort between investor-owned electric utilities and non-utility to develop policies, plans, or programs cooperatively. Many but not all of the interactive efforts examined are formal collaboratives. In addition, all ten cases include discussion of other EEAG activities, such as coalition-building, research, participation in statewide energy planning, and intervention in regulatory proceedings.

Performance Assessment and analysis of national building codes with fire safety in all wards of a hospital

Directory of Open Access Journals (Sweden)

M. Mahdinia

2009-04-01

Full Text Available Background and aimsAIDS as a re-emergent disease and Viral hepatitis (B and C as one of thBackground and objective: Fire safety is an important problem in hospitals. Movement less, lack of awareness and special situation of residents are the reasons of this subject. In more countries such as Iran, fire protection regulations have compiled within the framework of national building codes. Current building codes don't create sufficient safety for patient in the hospitals in different situations and more of the advanced countries in the world effort to establish building code, base  on performance. This study to be accomplished with this goal that determination of fire risk level in the wards of a hospital and survey the efficiency of the national building codes. Methodsfire risk assesses is done, using "engineering fire risk assessment method" with the checklist for Data gathering. In this manner, risk calculate in all compartments and in the next  stage for survey the effect of building codes, with this supposition that all compartment is  conforming to building code requirement, risk level calculate in two situation.Resultsthe results of present study reveals that, risk level in all wards is more than one and even though risk less than one is acceptable, consequently minimum of safely situations didn't  produce in most wards. The results show the national building code in the different conditions  don't have appropriate efficient for creation of suitable safety. Conclusionin order to access to a fire safety design with sufficient efficiency, suitable selection is use of risk assessment based on, design methods.

High-performance commercial building facades

Energy Technology Data Exchange (ETDEWEB)

Lee, Eleanor; Selkowitz, Stephen; Bazjanac, Vladimir; Inkarojrit, Vorapat; Kohler, Christian

2002-06-01

This study focuses on advanced building facades that use daylighting, sun control, ventilation systems, and dynamic systems. A quick perusal of the leading architectural magazines, or a discussion in most architectural firms today will eventually lead to mention of some of the innovative new buildings that are being constructed with all-glass facades. Most of these buildings are appearing in Europe, although interestingly U.S. A/E firms often have a leading role in their design. This ''emerging technology'' of heavily glazed fagades is often associated with buildings whose design goals include energy efficiency, sustainability, and a ''green'' image. While there are a number of new books on the subject with impressive photos and drawings, there is little critical examination of the actual performance of such buildings, and a generally poor understanding as to whether they achieve their performance goals, or even what those goals might be. Even if the building ''works'' it is often dangerous to take a design solution from one climate and location and transport it to a new one without a good causal understanding of how the systems work. In addition, there is a wide range of existing and emerging glazing and fenestration technologies in use in these buildings, many of which break new ground with respect to innovative structural use of glass. It is unclear as to how well many of these designs would work as currently formulated in California locations dominated by intense sunlight and seismic events. Finally, the costs of these systems are higher than normal facades, but claims of energy and productivity savings are used to justify some of them. Once again these claims, while plausible, are largely unsupported. There have been major advances in glazing and facade technology over the past 30 years and we expect to see continued innovation and product development. It is critical in this process to be able to

Observations of Building Performance under Combined Wind and Surge Loading from Hurricane Harvey

Science.gov (United States)

Lombardo, F.; Roueche, D. B.; Krupar, R. J.; Smith, D. J.; Soto, M. G.

2017-12-01

Hurricane Harvey struck the Texas coastline on August 25, 2017, as a Category 4 hurricane - the first major hurricane to reach the US in twelve years. Wind gusts over 130 mph and storm surge as high as 12.5 ft caused widespread damage to buildings and critical infrastructure in coastal communities including Rockport, Fulton, Port Aransas and Aransas Pass. This study presents the methodology and preliminary observations of a coordinated response effort to document residential building performance under wind and storm surge loading. Over a twelve day survey period the study team assessed the performance of more than 1,000 individual, geo-located residential buildings. Assessments were logged via a smartphone application to facilitate rapid collection and collation of geotagged photographs, building attributes and structural details, and structural damage observations. Detailed assessments were also made of hazard intensity, specifically storm surge heights and both wind speed and direction indicators. Preliminary observations and findings will be presented, showing strong gradients in damage between inland and coastal regions of the affected areas that may be due in part to enhanced individual loading effects of wind and storm surge and potentially joint-hazard loading effects. Contributing factors to the many cases of disproportionate damage observed in close proximity will also be discussed. Ongoing efforts to relate building damage to near-surface hazard measurements (e.g., radar, anemometry) in close proximity will also be described.

Do Haphazard Reviews Provide Sound Directions for Dissemination Efforts?

Science.gov (United States)

Gambrill, Eileen; Littell, Julia H.

2010-01-01

Comments on The dissemination and implementation of evidence-based psychological treatments: A review of current efforts by Kathryn R. McHugh and David H. Barlow. The lead article in the February-March issue by McHugh and Barlow (2010) emphasized the need for "dissemination and implementation of evidence-based psychological treatments."…

Functional materials for energy-efficient buildings

Directory of Open Access Journals (Sweden)

Ebert H.-P

2015-01-01

Full Text Available The substantial improving of the energy efficiency is essential to meet the ambitious energy goals of the EU. About 40% of the European energy consumption belongs to the building sector. Therefore the reduction of the energy demand of the existing building stock is one of the key measures to deliver a substantial contribution to reduce CO2-emissions of our society. Buildings of the future have to be efficient in respect to energy consumption for construction and operation. Current research activities are focused on the development of functional materials with outstanding thermal and optical properties to provide, for example, slim thermally superinsulated facades, highly integrated heat storage systems or adaptive building components. In this context it is important to consider buildings as entities which fulfill energy and comfort claims as well as aesthetic aspects of a sustainable architecture.

Functional materials for energy-efficient buildings

Science.gov (United States)

Ebert, H.-P.

2015-08-01

The substantial improving of the energy efficiency is essential to meet the ambitious energy goals of the EU. About 40% of the European energy consumption belongs to the building sector. Therefore the reduction of the energy demand of the existing building stock is one of the key measures to deliver a substantial contribution to reduce CO2-emissions of our society. Buildings of the future have to be efficient in respect to energy consumption for construction and operation. Current research activities are focused on the development of functional materials with outstanding thermal and optical properties to provide, for example, slim thermally superinsulated facades, highly integrated heat storage systems or adaptive building components. In this context it is important to consider buildings as entities which fulfill energy and comfort claims as well as aesthetic aspects of a sustainable architecture.

Learning from Local Wisdom: Friction Damper in Traditional Building

Directory of Open Access Journals (Sweden)

Pudjisuryadi P.

2012-01-01

Full Text Available Indonesia is situated in the so called “Ring of Fire” where earthquake are very frequent. Despite of all the engineering effort, due to the March 28, 2005 strong earthquake (8.7 on Richter scale a lot of modern buildings in Nias collapsed, while the traditional Northern Nias house (omohada survived without any damage. Undoubtedly many other traditional buildings in other area in Indonesia have survived similar earthquake. Something in common of the traditional building are the columns which usually are not fixed on the ground, but rest on top of flat stones. In this paper some traditional building are subjected to non linear time history analysis to artificial earthquake equivalent to 500 years return period earthquake. This study shows that apparently the columns which rest on top of flat stone acts as friction damper or base isolation. The presence of sliding at the friction type support significantly reduces the internal forces in the structure.

Earthquake risk assessment of building structures

International Nuclear Information System (INIS)

Ellingwood, Bruce R.

2001-01-01

During the past two decades, probabilistic risk analysis tools have been applied to assess the performance of new and existing building structural systems. Structural design and evaluation of buildings and other facilities with regard to their ability to withstand the effects of earthquakes requires special considerations that are not normally a part of such evaluations for other occupancy, service and environmental loads. This paper reviews some of these special considerations, specifically as they pertain to probability-based codified design and reliability-based condition assessment of existing buildings. Difficulties experienced in implementing probability-based limit states design criteria for earthquake are summarized. Comparisons of predicted and observed building damage highlight the limitations of using current deterministic approaches for post-earthquake building condition assessment. The importance of inherent randomness and modeling uncertainty in forecasting building performance is examined through a building fragility assessment of a steel frame with welded connections that was damaged during the Northridge Earthquake of 1994. The prospects for future improvements in earthquake-resistant design procedures based on a more rational probability-based treatment of uncertainty are examined

Analysis of heat source selection for residential buildings in rural areas

OpenAIRE

Szul Tomasz

2018-01-01

The research aiming to check whether the output of currently installed boilers matches the use requirements together with estimation of their energy efficiency was carried out on a group of 84 single-family residential buildings located in rural areas. Heating and hot water energy needs were calculated for each building in order to determine the use requirements. This enabled verification whether the currently installed boilers match the actual use requirements in the buildings. Based on the ...

Application of BIM technology in green building material management system

Science.gov (United States)

Zhineng, Tong

2018-06-01

The current green building materials management system in China's construction industry is not perfect, and there are still many shortcomings. Active construction of green building materials management system based on BIM technology, combined with the characteristics of green building materials and its relationship with BIM technology application, is urgently needed to better realize the scientific management of green building materials.

Estimation of inspection effort

International Nuclear Information System (INIS)

Mullen, M.F.; Wincek, M.A.

1979-06-01

An overview of IAEA inspection activities is presented, and the problem of evaluating the effectiveness of an inspection is discussed. Two models are described - an effort model and an effectiveness model. The effort model breaks the IAEA's inspection effort into components; the amount of effort required for each component is estimated; and the total effort is determined by summing the effort for each component. The effectiveness model quantifies the effectiveness of inspections in terms of probabilities of detection and quantities of material to be detected, if diverted over a specific period. The method is applied to a 200 metric ton per year low-enriched uranium fuel fabrication facility. A description of the model plant is presented, a safeguards approach is outlined, and sampling plans are calculated. The required inspection effort is estimated and the results are compared to IAEA estimates. Some other applications of the method are discussed briefly. Examples are presented which demonstrate how the method might be useful in formulating guidelines for inspection planning and in establishing technical criteria for safeguards implementation

Recent Developments of the Modelica"Buildings" Library for Building Energy and Control Systems

Energy Technology Data Exchange (ETDEWEB)

Wetter, Michael; Zuo, Wangda; Nouidui, Thierry Stephane

2011-04-01

At the Modelica 2009 conference, we introduced the Buildings library, a freely available Modelica library for building energy and control systems. This paper reports the updates of the library and presents example applications for a range of heating, ventilation and air conditioning (HVAC) systems. Over the past two years, the library has been further developed. The number of HVAC components models has been doubled and various components have been revised to increase numerical robustness.The paper starts with an overview of the library architecture and a description of the main packages. To demonstrate the features of the Buildings library, applications that include multizone airflow simulation as well as supervisory and local loop control of a variable air volume (VAV) system are briefly described. The paper closes with a discussion of the current development.

Building Participation in Large-scale Conservation: Lessons from Belize and Panama

Directory of Open Access Journals (Sweden)

Jesse Guite Hastings

2015-01-01

Full Text Available Motivated by biogeography and a desire for alignment with the funding priorities of donors, the twenty-first century has seen big international NGOs shifting towards a large-scale conservation approach. This shift has meant that even before stakeholders at the national and local scale are involved, conservation programmes often have their objectives defined and funding allocated. This paper uses the experiences of Conservation International′s Marine Management Area Science (MMAS programme in Belize and Panama to explore how to build participation at the national and local scale while working within the bounds of the current conservation paradigm. Qualitative data about MMAS was gathered through a multi-sited ethnographic research process, utilising document review, direct observation, and semi-structured interviews with 82 informants in Belize, Panama, and the United States of America. Results indicate that while a large-scale approach to conservation disadvantages early national and local stakeholder participation, this effect can be mediated through focusing engagement efforts, paying attention to context, building horizontal and vertical partnerships, and using deliberative processes that promote learning. While explicit consideration of geopolitics and local complexity alongside biogeography in the planning phase of a large-scale conservation programme is ideal, actions taken by programme managers during implementation can still have a substantial impact on conservation outcomes.

Coupled analysis of building damage due to tunneling

NARCIS (Netherlands)

Giardina, G.; Hendriks, M.A.N.; Rots, J.G.

2009-01-01

Excavation works in urban areas require a preliminary risk damage assessment. In historical cities, the prediction of building response to settlements is necessary to reduce the risk of damage of the architectural heritage. The current method used to predict the building damage due to ground

Greening Public Buildings: ESCO-Contracting in Danish Municipalities

DEFF Research Database (Denmark)

Jensen, Jesper Ole; Nielsen, Susanne Balslev; Rohr Hansen, Jesper

2013-01-01

This paper presents current research on Danish municipalities’ use of Energy Service Companies (ESCO) as a way to improve the standard of public buildings and to increase energy efficiency. In recent years more and more municipalities have used ESCO-contracts to retrofit existing public buildings...

Why the developing nations like India need strong capacity building efforts in greenhouse gases mitigation?

Science.gov (United States)

Vishal, V.; Sudhakaran, A.; Singh, T. N.

2014-12-01

Today, India rubs shoulders with nations like USA and China for being the major shareholders in global greenhouse emissions and has more emissions than Russia! Carbon Capture, Utilization and Storage (CCUS) has been proven as a reliable method to counter global warming and keep the 2ºC per year policy in check and is currently in the pilot stage in many developed nations. The three major requirements for CCUS are: manpower in diverse fields, implementation potential and capital. Keeping other social problems aside, India still has sufficient mankind in all spheres of research ranging from earth science, engineering, basic sciences, economy, policy making, regulation, public outreach etc. to successfully work on such challenges. India has leading academic institutions, research labs and universities in science and engineering. They also have a working power force in aspects like economy, policy making, regulation, public outreach etc. in various management institutes of repute. India, however, lacks in sufficient funding for advanced research and capacity building schemes to support projects of such scale. Deployment of facts and concepts on climate change need an approach of much greater scope than what is anticipated. The above workforces can put forth a clear picture about the various entities surrounding CCUS and provide sensible planning and implementation information through scientific research. CCUS is only possible when the direct anthropogenic emitters like fossil fuel plants modify their features to incorporate the methods associated with it. The rural population has to be educated in context to the safety of the storage sites. Above all, the Indian government must holistically divert funds for such programs and provide economic incentives to the industries for the industries. The bottom line is that India has been working in lots of aspects with not very clear cuts objectives. There are CO2 capture technologies like amine scrubbing and membrane

A Testbed Environment for Buildings-to-Grid Cyber Resilience Research and Development

Energy Technology Data Exchange (ETDEWEB)

Sridhar, Siddharth; Ashok, Aditya; Mylrea, Michael E.; Pal, Seemita; Rice, Mark J.; Gourisetti, Sri Nikhil Gup

2017-09-19

The Smart Grid is characterized by the proliferation of advanced digital controllers at all levels of its operational hierarchy from generation to end consumption. Such controllers within modern residential and commercial buildings enable grid operators to exercise fine-grained control over energy consumption through several emerging Buildings-to-Grid (B2G) applications. Though this capability promises significant benefits in terms of operational economics and improved reliability, cybersecurity weaknesses in the supporting infrastructure could be exploited to cause a detrimental effect and this necessitates focused research efforts on two fronts. First, the understanding of how cyber attacks in the B2G space could impact grid reliability and to what extent. Second, the development and validation of cyber-physical application-specific countermeasures that are complementary to traditional infrastructure cybersecurity mechanisms for enhanced cyber attack detection and mitigation. The PNNL B2G testbed is currently being developed to address these core research needs. Specifically, the B2G testbed combines high-fidelity buildings+grid simulators, industry-grade building automation and Supervisory Control and Data Acquisition (SCADA) systems in an integrated, realistic, and reconfigurable environment capable of supporting attack-impact-detection-mitigation experimentation. In this paper, we articulate the need for research testbeds to model various B2G applications broadly by looking at the end-to-end operational hierarchy of the Smart Grid. Finally, the paper not only describes the architecture of the B2G testbed in detail, but also addresses the broad spectrum of B2G resilience research it is capable of supporting based on the smart grid operational hierarchy identified earlier.

Development of a methodology for life cycle building energy ratings

International Nuclear Information System (INIS)

Hernandez, Patxi; Kenny, Paul

2011-01-01

Traditionally the majority of building energy use has been linked to its operation (heating, cooling, lighting, etc.), and much attention has been directed to reduce this energy use through technical innovation, regulatory control and assessed through a wide range of rating methods. However buildings generally employ an increasing amount of materials and systems to reduce the energy use in operation, and energy embodied in these can constitute an important part of the building's life cycle energy use. For buildings with 'zero-energy' use in operation the embodied energy is indeed the only life cycle energy use. This is not addressed by current building energy assessment and rating methods. This paper proposes a methodology to extend building energy assessment and rating methods accounting for embodied energy of building components and systems. The methodology is applied to the EU Building Energy Rating method and, as an illustration, as implemented in Irish domestic buildings. A case study dwelling is used to illustrate the importance of embodied energy on life cycle energy performance, particularly relevant when energy use in operation tends to zero. The use of the Net Energy Ratio as an indicator to select appropriate building improvement measures is also presented and discussed. - Highlights: → The definitions for 'zero energy buildings' and current building energy ratings are examined. → There is a need to integrate a life cycle perspective within building energy ratings. → A life cycle building energy rating method (LC-BER), including embodied energy is presented. → Net Energy Ratio is proposed as an indicator to select building energy improvement options.

Using a gas-fired heat pump for heating and cooling in an office building

Energy Technology Data Exchange (ETDEWEB)

Bergmann, E [Westfaelische Ferngas-A.G., Dortmund (Germany, F.R.)

1979-01-01

Within the frame of the efforts made for a rational energy application by using new technologies, especially the long-known concept of heat pumps was prepared for heat production in swimming pools, sport centers, and buildings. Motivated by these activities, this technology was used, with additional heat recovery, for air-conditioning an administration building. After investigating various supply systems, an energy concept was processed with the aim to optimize the relation of the building costs to the operational costs of the air-condition, ventilation,- and heating systems.

Barriers' and policies' analysis of China's building energy efficiency

International Nuclear Information System (INIS)

Zhang, Yurong; Wang, Yuanfeng

2013-01-01

With the rapid economic growth and the improvement of people's living standards, China's building energy consumption has kept rising during the past 15 years. Under the effort of the Chinese government and the society, China's building energy efficiency has made certain achievements. However, the implementation of building energy efficiency in China is still far from its potential. Based on the analysis of the existing policies implemented in China, the article concluded that the most essential and the most effective ways to promote building energy efficiency is the government's involvement as well as economic and financial incentives. In addition, the main barriers in the process of promoting building energy efficiency in China are identified in six aspects. It has been found that the legal system and administrative issues constitute major barriers, and the lack of financial incentives and the mismatching of market mechanism also hamper the promotion of building energy efficiency. Finally, in view of the existing policies and barriers analysis, three corresponding policy proposals are presented. -- Highlights: •The existing policies implemented in China from three aspects are presented and analysed. •The Government's involvement is the most essential effective way to promote building-energy efficiency. •Six aspects of barriers in promoting building energy efficiency in China are identified. •The legal system and administrative issues constitute the major barriers. •Three policy proposals to further promote building energy efficiency in China are proposed

Analysis of heat source selection for residential buildings in rural areas

Directory of Open Access Journals (Sweden)

Szul Tomasz

2018-01-01

Full Text Available The research aiming to check whether the output of currently installed boilers matches the use requirements together with estimation of their energy efficiency was carried out on a group of 84 single-family residential buildings located in rural areas. Heating and hot water energy needs were calculated for each building in order to determine the use requirements. This enabled verification whether the currently installed boilers match the actual use requirements in the buildings. Based on the calculations it was determined that the designed average boiler output in the group of buildings subject to analysis is 15.7 kW, whereas the mean rated output capacity of boilers installed therein is 25.4 kW. On average, the output capacity of the installed boilers exceeds the use requirements for the buildings by 60%. To calculate the energy efficiency of boilers, the mean annual boiler output capacity use coefficient was determined. For boilers selected on the basis of standard calculations, the mean coefficient is 0.47. For boilers currently in use it is 0.31, less than the above figure. The above calculations show that if boilers were correctly selected in compliance to the building needs, then the average estimated seasonal efficiency of 65% would be feasible. However, in the current state the achievable efficiency is approx. 55%.

Better building of valley fills

Energy Technology Data Exchange (ETDEWEB)

Chironis, N.P.

1980-03-01

Current US regulations for building valley fills or head of hollow fills to hold excess spoil resulting from contour mining are meeting with considerable opposition, particularly from operators in steep-slope areas. An alternative method has been submitted to the Office of Surface Mining by Virgina. Known as the zoned concept method, it has already been used successfully in building water-holding dams and coal refuse embankments on sloping terrain. The ways in which drainage and seepage are managed are described.

Situation thinking as an aid to organizing and planning the construction effort

International Nuclear Information System (INIS)

Stull, J.O.

1976-01-01

Constructibility of a nuclear project design can be improved by assigning experienced construction men to work with the design engineers. A construction sequence can be developed using a small scale model simulating the various stages of construction. Seeing a simulated situation dictates a conclusion to the experienced construction man which can be explained and is usually acceptable to all. The result is a unified team effort and a good constructible design. Photos of the model in a Work Plan Book provide an effective medium for transferring this planned sequence to the constructor. Slides can quickly express the plan to management and the client. Working with engineers on design models and using a standard identification program for systems and buildings can be an aid to construction. Cross-reference requirements which complicate field and office work can be minimized by developing standard identifiers for buildings and systems. Review of design models by construction men can provide access for construction, eliminate delays and costly out-of-sequence work

Modelling the distribution of 222Rn concentration in a multi level, general purpose building

International Nuclear Information System (INIS)

Toro, Laszlo; Noditi, Mihaela; Gheorghe, Raluca; Gheorghe, Dan

2008-01-01

The importance of 222 Rn (radon) in the indoor air related to the exposure form natural sources is relatively well documented. About 30% of the individual effective dose from natural sources is coming from the inhalation of 222 Rn and his short lived daughters. In unfavorable conditions given by the soil porosity and the existence of upward air movement in the soil there is a possibility to have unusually high radon concentration in houses even on soil with 'normal' 226 Ra content. Some construction solutions (high indoor spaces) should generate a significant indoor-outdoor negative pressure differences and consequently upward air currents (stack effect) which will facilitate the entrance of radon in the building. This effect will multiply the possibility of migration of radon in the building. The difficulty of the prediction of radon migration in the soil-building system increase the importance of the mathematical modelling of the behavior of radon-soil emission, infiltration and migration in the building - in areas with high radon potential. For one level simple buildings there are several models in the literature but the information regarding the multilevel building models are relatively scarce. Two different approaches used to describe the behavior of the radon gas in large (mainly high) buildings have been analyzed: Direct approach: computational fluid dynamics, solving the transport equations for the whole building (the domain of the solution of the transport and flow equations is delimited by the building envelope - the external walls); the openings (internal and external) and ventilation are defined by the boundary conditions. This approach is quite complex, the equations are solved (numerically) for highly inhomogeneous medium but is based on the fundamental processes governing the transport. In the same time it gives the possibility to obtain a concentration pattern in every part of the building. Multi-zone approach treating the building as interconnected

Reserve-building activities in multiple sclerosis patients and healthy controls: a descriptive study.

Science.gov (United States)

Schwartz, Carolyn E; Ayandeh, Armon; Ramanathan, Murali; Benedict, Ralph; Dwyer, Michael G; Weinstock-Guttman, Bianca; Zivadinov, Robert

2015-08-12

Cognitive reserve has been implicated as a possible protective factor in multiple sclerosis (MS) but to date no study has compared reserve-building activities across disease course or to healthy controls. This study aims to describe differences in reserve-building activities across the MS disease course and healthy controls. Secondary analysis of a cross-sectional cohort study that included 276 healthy controls, and subjects with clinically isolated syndrome (CIS; n = 67), relapsing-remitting MS (RRMS; n = 358) and secondary progressive MS (PMS; n = 109). Past reserve-building activities were operationalized as occupational attainment and education. Current activities comprised 6 strenuous and 6 non-strenuous activities, including 5 reserve-building activities and television-watching. Multivariate Analysis of Variance models examined group differences in past and current activities, after adjusting for covariates. There were group differences in past and current reserve-building activities. SPMS patients had lower past reserve-building activities than healthy controls. All forms of MS engaged in fewer strenuous current reserve-building pursuits than healthy controls. RRMS read less than healthy controls. SPMS engaged in fewer job-related non-strenuous activities. All MS groups watched more television than healthy controls. MS patients show significantly fewer past and present reserve-building activities. Although it is difficult to establish causality without future prospective studies, lifestyle-modifying interventions should prioritize expanding MS patients' repertoire of strenuous and non-strenuous activities.

Effortful echolalia.

Science.gov (United States)

Hadano, K; Nakamura, H; Hamanaka, T

1998-02-01

We report three cases of effortful echolalia in patients with cerebral infarction. The clinical picture of speech disturbance is associated with Type 1 Transcortical Motor Aphasia (TCMA, Goldstein, 1915). The patients always spoke nonfluently with loss of speech initiative, dysarthria, dysprosody, agrammatism, and increased effort and were unable to repeat sentences longer than those containing four or six words. In conversation, they first repeated a few words spoken to them, and then produced self initiated speech. The initial repetition as well as the subsequent self initiated speech, which were realized equally laboriously, can be regarded as mitigated echolalia (Pick, 1924). They were always aware of their own echolalia and tried to control it without effect. These cases demonstrate that neither the ability to repeat nor fluent speech are always necessary for echolalia. The possibility that a lesion in the left medial frontal lobe, including the supplementary motor area, plays an important role in effortful echolalia is discussed.

A REVIEW OF FACTORS AFFECTING BUILDING DEFECTS IN SINGAPORE

Directory of Open Access Journals (Sweden)

Po Seng Kian

2001-01-01

Full Text Available In developing countries, building maintenance technology is currently vastly underrated and ignored by owners, managers, and professionals. The building and construction authority of Singapore (BCA has identified that the complaints about building defects have gone up in recent years with common problems such as leaky roof and walls, floor defect, and improper outlet pipe. This paper presents a brief description on building defect in use for commercial building as well as residential buildings in Singapore. The main objective is to highlight the important problems and suggest a greater participation of professionals in building maintenance. It also provides some site investigations photographs of various defects, which is expected to be useful for builders, architects, and others who deal with building materials.

Energy management study: A proposed case of government building

International Nuclear Information System (INIS)

Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Baharum, Mohd Faizal

2015-01-01

Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount of energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building

Energy management study: A proposed case of government building

Science.gov (United States)

Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Baharum, Mohd Faizal

2015-05-01

Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount of energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building.

Energy management study: A proposed case of government building

Energy Technology Data Exchange (ETDEWEB)

Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd [School of Technology Management and Logistics, Universiti Utara Malaysia, 06010 Sintok, Kedah (Malaysia); Baharum, Mohd Faizal [School of Building, Housing and Planning, Universiti Sains Malaysia, 11800 Penang (Malaysia)

2015-05-15

Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount of energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building.

THE EVOLUTION OF THE DESIGN AND CONSTRUCTION OF MASONRY BUILDINGS IN BRAZIL

Directory of Open Access Journals (Sweden)

Márcio R. S. Corrêa

2012-12-01

Full Text Available This paper presents an overview of the use of masonry in Brazil. Some historical remarks are presented showing how masonry was introduced and has been developed in the country. A brief on the Brazilian Universities is also reviewed, showing the extensive efforts made to improve the educational system and to insert Brazil into the international masonry research environment. Current materials are shown, focusing on the use of structural and non-structural masonry. The paper points out the development of Codes, considering the most important regulated characteristics of masonry in order to be used in Brazilian constructions. The building situation is addressed, stressing the large housing demands and how the masonry industry can help to partly solve the problem. Finally, present and future challenges are discussed, showing Brazil’s constructions needs, as an emerging country.

Building a print on demand web service

Science.gov (United States)

Reddy, Prakash; Rozario, Benedict; Dudekula, Shariff; V, Anil Dev

2011-03-01

There is considerable effort underway to digitize all books that have ever been printed. There is need for a service that can take raw book scans and convert them into Print on Demand (POD) books. Such a service definitely augments the digitization effort and enables broader access to a wider audience. To make this service practical we have identified three key challenges that needed to be addressed. These are: a) produce high quality image images by eliminating artifacts that exist due to the age of the document or those that are introduced during the scanning process b) develop an efficient automated system to process book scans with minimum human intervention; and c) build an eco system which allows us the target audience to discover these books.

Current practice and developmental efforts for leak detection in U.S. reactor primary systems

International Nuclear Information System (INIS)

Kupperman, D.S.; Claytor, T.N.

1986-01-01

Current leak detection practices in 74 operating nuclear reactors have been reviewed. Existing leak detection systems are adequate to ensure a leak-before-break scenario in most situations, but no currently available, single method combines optimal leakage detection sensitivity, leak-locating ability, and leakage measurement accuracy. Simply tightening current leakage limits may produce an unacceptably large number of unnecessary shutdowns. The use of commercially available acoustic monitoring systems or moisture-sensitive tape may improve leak detection capability at specific sites. However, neither of these methods currently provides source discrimination (e.g., to distinguish between leaks from pipe cracks and valves) or leak-rate information (a small leak may saturate the system). A field-implementable acoustic leak detection system is being developed to address these limitations. 5 refs.

Country Report on Building Energy Codes in the United States

Energy Technology Data Exchange (ETDEWEB)

Halverson, Mark A.; Shui, Bin; Evans, Meredydd

2009-04-30

This report is part of a series of reports on building energy efficiency codes in countries associated with the Asian Pacific Partnership (APP) - Australia, South Korea, Japan, China, India, and the United States of America (U.S.). This reports gives an overview of the development of building energy codes in U.S., including national energy policies related to building energy codes, history of building energy codes, recent national projects and activities to promote building energy codes. The report also provides a review of current building energy codes (such as building envelope, HVAC, lighting, and water heating) for commercial and residential buildings in the U.S.

Development of a building performance laboratory for South Africa

CSIR Research Space (South Africa)

Parsons, S

2009-05-01

Full Text Available The CSIR Building Science and Technology Competence area is currently in the process of establishing a Building Performance Laboratory (BPL). The BPL is aimed at becoming a centre at which the knowledge generation and technology development...

An analysis of heating and cooling conservation features in commercial buildings

International Nuclear Information System (INIS)

Sutherland, R.J.

1990-01-01

One purpose of this study is to estimate the relationship in commercial buildings between conservation investments, fuel prices, building occupancy and building characteristics for new buildings and for existing buildings. The data base is a nationwide survey of energy in commercial buildings conducted by the Energy Information Administration (EIA) in 1986. Some simple cross-tabulations indicate that conservation measures vary with building size, building age, type of building, and fuel used for building heating. Regression estimates of a conservation model indicate that the number of conservation features installed during construction is a positive function of the price of the heating fuel at the time of construction. Subsequent additions of conservation features are positively correlated with increases in heating fuel prices. Given the EIA projection of relatively stable future energy prices, the number of retrofits may not increase significantly. Also, energy efficiency in new buildings may not continue to increase relative to current new buildings. If fuel prices affect consumption via initial conservation investments, current fuel prices, marginal or average, are not the appropriate specification. The fuel price regression results indicate that conservation investments in new buildings are responsive to market signals. Retrofits are less responsive to market signals. The number of conservation features in a building is not statistically related to the type of occupancy (owner versus renter), which implies that conservation strategies are not impeded by the renting or leasing of buildings

Analysis of an Irregular RC Multi-storeyed Building Subjected to Dynamic Loading

Science.gov (United States)

AkashRaut; Pachpor, Prabodh; Dautkhani, Sanket

2018-03-01

Many buildings in the present scenario have irregular configurations both in plan and elevation. This in future may subject to devastating earthquakes. So it is necessary to analyze the structure. The present paper is made to study three type of irregularity wiz vertical, mass and plan irregularity as per clause 7.1 of IS 1893 (part1)2002 code. The paper discusses the analysis of RC (Reinforced Concrete) Buildings with vertical irregularity. The study as a whole makes an effort to evaluate the effect of vertical irregularity on RC buildings for which comparison of three parameters namely shear force, bending moment and deflection are taken into account.

Building neuroscientific evidence and creating best practices for Active and Healthy Aging through ubiquitous exergaming and Living Labs.

Science.gov (United States)

Bamidis, Panagiotis D

2015-01-01

Ageing is a major global demographic trend, which seems to be intensified. The earlier detection of risks associated with ageing, can enable earlier intervention to ameliorate their negative consequences. Many of these recent efforts are associated with the use of Information and Communication Technologies (ICTs) and the stemming from them innovations in the fight against this age related decline and frailty. Ubiquitous unobtrusive monitoring and training (recently much blended by means of exergames) has become reality due to the availability of new mobile sensors and devices and the emergence of new technologies and services. The current piece of work presents the different milestones we have achieved as best practices during the past seven years of piloting training and exergaming ICT components in an effort to support Active and Healthy Aging. Our impact verification and results validation methodologies are revisited here in an effort to outline best practices and build up neuroscientific evidence. Finally, this paper demonstrates how the construction of an Active and Healthy Aging Living Lab was materialised in an attempt to gauge evidence based research in the field of active and health aging.

Multi-Criteria Approach in Multifunctional Building Design Process

Science.gov (United States)

Gerigk, Mateusz

2017-10-01

The paper presents new approach in multifunctional building design process. Publication defines problems related to the design of complex multifunctional buildings. Currently, contemporary urban areas are characterized by very intensive use of space. Today, buildings are being built bigger and contain more diverse functions to meet the needs of a large number of users in one capacity. The trends show the need for recognition of design objects in an organized structure, which must meet current design criteria. The design process in terms of the complex system is a theoretical model, which is the basis for optimization solutions for the entire life cycle of the building. From the concept phase through exploitation phase to disposal phase multipurpose spaces should guarantee aesthetics, functionality, system efficiency, system safety and environmental protection in the best possible way. The result of the analysis of the design process is presented as a theoretical model of the multifunctional structure. Recognition of multi-criteria model in the form of Cartesian product allows to create a holistic representation of the designed building in the form of a graph model. The proposed network is the theoretical base that can be used in the design process of complex engineering systems. The systematic multi-criteria approach makes possible to maintain control over the entire design process and to provide the best possible performance. With respect to current design requirements, there are no established design rules for multifunctional buildings in relation to their operating phase. Enrichment of the basic criteria with functional flexibility criterion makes it possible to extend the exploitation phase which brings advantages on many levels.

ARMAGH OBSERVATORY – HISTORIC BUILDING INFORMATION MODELLING FOR VIRTUAL LEARNING IN BUILDING CONSERVATION

Directory of Open Access Journals (Sweden)

M. Murphy

2017-08-01

Full Text Available In this paper the recording and design for a Virtual Reality Immersive Model of Armagh Observatory is presented, which will replicate the historic buildings and landscape with distant meridian markers and position of its principal historic instruments within a model of the night sky showing the position of bright stars. The virtual reality model can be used for educational purposes allowing the instruments within the historic building model to be manipulated within 3D space to demonstrate how the position measurements of stars were made in the 18th century. A description is given of current student and researchers activities concerning on-site recording and surveying and the virtual modelling of the buildings and landscape. This is followed by a design for a Virtual Reality Immersive Model of Armagh Observatory use game engine and virtual learning platforms and concepts.

Overview of the NEES-Soft Experimental Program for Seismic Risk Reduction of Soft-Story Woodframe Buildings

Science.gov (United States)

John W. van de Lindt; Pouria Bahmani; Steven E. Pryor; Gary Mochizuki; Mikhail Gershfeld; Weichiang Pang; Ershad Ziaei; Elaina N. Jennings; Michael D. Symans; Xiaoyun Shao; Jingjing Tian; Doug Rammer

2014-01-01

The existence of thousands of soft-story woodframe buildings in California has been recognized as a disaster preparedness problem resulting in mitigation efforts throughout the state. The considerable presence of these large multi-family buildings in San Francisco prompted the city to mandate their retrofitting over the next seven years. The NEES-Soft project, whose...

An Examination of the Performance Based Building Code on the Design of a Commercial Building

Directory of Open Access Journals (Sweden)

John Greenwood

2012-11-01

Full Text Available The Building Code of Australia (BCA is the principal code under which building approvals in Australia are assessed. The BCA adopted performance-based solutions for building approvals in 1996. Performance-based codes are based upon a set of explicit objectives, stated in terms of a hierarchy of requirements beginning with key general objectives. With this in mind, the research presented in this paper aims to analyse the impact of the introduction of the performance-based code within Western Australia to gauge the effect and usefulness of alternative design solutions in commercial construction using a case study project. The research revealed that there are several advantages to the use of alternative designs and that all parties, in general, are in favour of the performance-based building code of Australia. It is suggested that change in the assessment process to streamline the alternative design path is needed for the greater use of the performance-based alternative. With appropriate quality control measures, minor variations to the deemed-to-satisfy provisions could easily be managed by the current and future building surveying profession.

Development of damage functions for high-rise building components

International Nuclear Information System (INIS)

Kustu, O.; Miller, D.D.; Brokken, S.T.

1982-10-01

The component approach for predicting the effects that ground motion from underground nuclear explosions will have on structures involves predicting the damage to each structural and nonstructural component of a building on the basis of the expected local deformation that most affects the damage to the component. This study was conducted to provide the basic data necessary to evaluate the component approach. Available published laboratory test data for various high-rise building components were collected. These data were analyzed statistically to determine damage threshold values and their variabilities, which in turn were used to derive component damage functions. The portion of construction costs attributable to various building components was determined statistically. This information was needed because component damage functions define damage as a percentage of the replacement values of the component, and, in order to calculate the overall building damage factor, the relative cost of each component must be estimated. The feasibility of the component approach to damage prediction is demonstrated. It is recommended that further experimental research directed towards developing an adequate data base of component damage thresholds for all significant building components should be encouraged. Parallel to this effort, detailed damage data from specific buildings damaged in earthquakes should be collected to verify the theoretical procedure

Modelling energy demand in the buildings sector within the EU

Energy Technology Data Exchange (ETDEWEB)

O Broin, Eoin

2012-11-01

In the on-going effort within the EU to tackle greenhouse gas emissions and secure future energy supplies, the buildings sector is often referred to as offering a large potential for energy savings. The aim of this thesis is to produce scenarios that highlight the parameters that affect the energy demands and thus potentials for savings of the building sector. Top-down and bottom-up approaches to modelling energy demand in EU buildings are applied in this thesis. The top-down approach uses econometrics to establish the historical contribution of various parameters to energy demands for space and water heating in the residential sectors of four EU countries. The bottom-up approach models the explicit impact of trends in energy efficiency improvement on total energy demand in the EU buildings stock. The two approaches are implemented independently, i.e., the results from the top-down studies do not feed into those from the bottom-up studies or vice versa. The explanatory variables used in the top-down approach are: energy prices; heating degree days, as a proxy for outdoor climate; a linear time trend, as a proxy for technology development; and the lag of energy demand, as a proxy for inertia in the system. In this case, inertia refers to the time it takes to replace space and water heating systems in reaction to price changes. The analysis gives long-term price elasticities of demand as follows: for France, -0.17; for Italy, -0.35; for Sweden, -0.27; and for the UK, -0.35. These results reveal that the price elasticity of demand for space and water heating is inelastic in each of these cases. Nonetheless, scenarios created for the period up to 2050 using these elasticities and an annual price increase of 3 % show that demand can be reduced by more than 1 % per year in France and Sweden and by less than 1 % per year in Italy and the UK. In the bottom-up modelling, varying rates for conversion efficiencies, heating standards for new buildings, end-use efficiency, and

Peak load shifting control using different cold thermal energy storage facilities in commercial buildings: A review

International Nuclear Information System (INIS)

Sun, Yongjun; Wang, Shengwei; Xiao, Fu; Gao, Diance

2013-01-01

Highlights: • Little study reviews the load shifting control using different facilities. • This study reviews load shifting control using building thermal mass. • This study reviews load shifting control using thermal energy storage systems. • This study reviews load shifting control using phase change material. • Efforts for developing more applicable load shifting control are addressed. - Abstract: For decades, load shifting control, one of most effective peak demand management methods, has attracted increasing attentions from both researchers and engineers. Different load shifting control strategies have been developed when diverse cold thermal energy storage facilities are used in commercial buildings. The facilities include building thermal mass (BTM), thermal energy storage system (TES) and phase change material (PCM). Little study has systematically reviewed these load shifting control strategies and therefore this study presents a comprehensive review of peak load shifting control strategies using these thermal energy storage facilities in commercial buildings. The research and applications of the load shifting control strategies are presented and discussed. The further efforts needed for developing more applicable load shifting control strategies using the facilities are also addressed

Guidelines for indoor air hygiene in school buildings

Energy Technology Data Exchange (ETDEWEB)

Moriske, Heinz-Joern; Szewzyk, Regine (eds.)

2008-08-15

The new guidelines for indoor air hygiene in school buildings are intended as a response to current requirements in school practice. The recommendations aim to help to avoid mistakes in modernising school buildings and to provide hygiene-specific support in planning of new school buildings. The guidelines are laid out as follows: (a) In the general section the targets of the guidelines and the target groups are addressed. The current indoor hygiene situation in German schools is described, followed by the parameters with regard to peripheral issues which will not be dealt with further; (b) Part A deals with the hygiene requirements in the practical running of schools. Besides general requirements for maintenance and operation the important issues of cleaning and ventilation are considered, as well as minor building works; (c) Part B provides an overview of important chemical and biological contaminants in schools; (d) Part C looks at building and air conditioning requirements. The important issues of acoustic requirements is also addressed; (e) Part D shows how to deal practically with problem cases and list case studies with 'typical' procedures; (f) Part E provides a brief overview of existing renovation guidelines.

Guidelines for indoor air hygiene in school buildings

Energy Technology Data Exchange (ETDEWEB)

Moriske, Heinz-Joern; Szewzyk, Regine [eds.

2008-08-15

The new guidelines for indoor air hygiene in school buildings are intended as a response to current requirements in school practice. The recommendations aim to help to avoid mistakes in modernising school buildings and to provide hygiene-specific support in planning of new school buildings. The guidelines are laid out as follows: (a) In the general section the targets of the guidelines and the target groups are addressed. The current indoor hygiene situation in German schools is described, followed by the parameters with regard to peripheral issues which will not be dealt with further; (b) Part A deals with the hygiene requirements in the practical running of schools. Besides general requirements for maintenance and operation the important issues of cleaning and ventilation are considered, as well as minor building works; (c) Part B provides an overview of important chemical and biological contaminants in schools; (d) Part C looks at building and air conditioning requirements. The important issues of acoustic requirements is also addressed; (e) Part D shows how to deal practically with problem cases and list case studies with 'typical' procedures; (f) Part E provides a brief overview of existing renovation guidelines.

Building in a Market Economy

DEFF Research Database (Denmark)

Bonke, Sten; Levring, Peter

This book offers a "state of the art" introduction to the "Danish way" of building. It presents a source of information and inspiration to the complex transitional process of rearranging the construction sectors in Central and Eastern European countries. The text gives a historical presentation o...... and functions of the main actors in the building process. During these passages and in a final section important future developments are highlighted, and characteristic research and development projects are presented....... of the development in the built environment since the second world war. Subsequently the different current regulative systems on state and on building industry level are revised. The more practical managerial methods are then elaborated and associated with the common organisational frameworks, indicating the roles...

Site Characterization Plan for decontamination and decommissioning of Buildings 3506 and 3515 at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

1993-09-01

Buildings 3506, the Waste Evaporator Facility, and 3515, the Fission Product Pilot Plant, at Oak Ridge National Laboratory (ORNL), are scheduled for decontamination and decommissioning (D and D). This Site Characterization Plan (SCP) presents the strategy and techniques to be used to characterize Buildings 3506/3515 for the purpose of planning D and D activities. The elements of the site characterization for Buildings 3506/3515 are planning and preparation, field investigation, and characterization reporting. Other level of effort activities will include management and oversight, project controls, meetings, and progress reporting. The objective of the site characterization is to determine the nature and extent of radioactive and hazardous materials and other industrial hazards in and around the buildings. This information will be used in subsequent planning to develop a detailed approach for final decommissioning of the facilities: (1) to evaluate decommissioning alternatives and design the most cost-effective D and D approach; (2) to determine the level and type of protection necessary for D and D workers; and (3) to estimate the types and volumes of wastes generated during D and D activities. The current D and D characterization scope includes the entire building, including the foundation and equipment or materials within the building. To estimate potential worker exposure from the soil during D and D, some subfoundation soil sample collection is planned. Buildings 3506/3515 are located in the ORNL main plant area, to the west and east, respectively, of the South Tank Farm. Building 3506 was built in 1949 to house a liquid waste evaporator and was subsequently used for an incinerator experiment. Partial D and D was done prior to abandonment, and most equipment has been removed. Building 3515 was built in 1948 to house fission product separation equipment. In about 1960, all entrances were sealed with concrete block and mortar. Building 3515 is expected to be

Development of a California commercial building benchmarking database

International Nuclear Information System (INIS)

Kinney, Satkartar; Piette, Mary Ann

2002-01-01

Building energy benchmarking is a useful starting point for commercial building owners and operators to target energy savings opportunities. There are a number of tools and methods for benchmarking energy use. Benchmarking based on regional data can provides more relevant information for California buildings than national tools such as Energy Star. This paper discusses issues related to benchmarking commercial building energy use and the development of Cal-Arch, a building energy benchmarking database for California. Currently Cal-Arch uses existing survey data from California's Commercial End Use Survey (CEUS), a largely underutilized wealth of information collected by California's major utilities. Doe's Commercial Building Energy Consumption Survey (CBECS) is used by a similar tool, Arch, and by a number of other benchmarking tools. Future versions of Arch/Cal-Arch will utilize additional data sources including modeled data and individual buildings to expand the database

Six methodological steps to build medical data warehouses for research.

Science.gov (United States)

Szirbik, N B; Pelletier, C; Chaussalet, T

2006-09-01

We propose a simple methodology for heterogeneous data collection and central repository-style database design in healthcare. Our method can be used with or without other software development frameworks, and we argue that its application can save a relevant amount of implementation effort. Also, we believe that the method can be used in other fields of research, especially those that have a strong interdisciplinary nature. The idea emerged during a healthcare research project, which consisted among others in grouping information from heterogeneous and distributed information sources. We developed this methodology by the lessons learned when we had to build a data repository, containing information about elderly patients flows in the UK's long-term care system (LTC). We explain thoroughly those aspects that influenced the methodology building. The methodology is defined by six steps, which can be aligned with various iterative development frameworks. We describe here the alignment of our methodology with the RUP (rational unified process) framework. The methodology emphasizes current trends, as early identification of critical requirements, data modelling, close and timely interaction with users and stakeholders, ontology building, quality management, and exception handling. Of a special interest is the ontological engineering aspect, which had the effects with the highest impact after the project. That is, it helped stakeholders to perform better collaborative negotiations that brought better solutions for the overall system investigated. An insight into the problems faced by others helps to lead the negotiators to win-win situations. We consider that this should be the social result of any project that collects data for better decision making that leads finally to enhanced global outcomes.

Upgrade Opportunities for Buildings in City Centres

Directory of Open Access Journals (Sweden)

Silva M.

2012-10-01

Full Text Available This proposal focus on the potential of the existing buildings upgrade process in achieving the 20-20-20 goals, as these are the biggest energy consumers, the most significant built area and the better placed buildings within our cities. These buildings frequently lack basic maintenance and need intervention, but include within themselves a vast amount of incorporated energy and centuries of construction knowledge. Beyond the advantages that may result from re-attracting people back into the city centre, upgrading these existing buildings can also have positive bounce-back effect on the reduction of the energy needs related to transportation, as demonstrated in studies that alert to the impact of the building sprawl in the total energy use. As “buildings account for 40 % of total energy consumption in the Union”, the better performance of this sector has a significant role, remembering that “these requirements shall take account of general indoor climate conditions, in order to avoid possible negative effects such as inadequate ventilation, as well as local conditions and the designated function and the age of the building” [1]. The importance of “upgrading” the existing buildings resides on the fact that new buildings represent only approximately 1 or 2% of the total usable area, an estimate that is bound to decrease due to the current construction crisis. While the recent buildings tend to be more efficient, the numerous existing buildings are important stakeholders due to their massive consumptions and incorporated energy. The ongoing Annex 56 on “Energy & Greenhouse Gas Optimized Building Renovation” assumes that “Current standards do not respond effectively to the numerous constraints imposed by existing buildings and in many cases, the requirements result in very expensive measures and complex procedures, seldom accepted by occupants, owners or developers. It is then urgent for the new standards to respond to these

An Economic and Environmental Assessment Model for Selecting the Optimal Implementation Strategy of Fuel Cell Systems—A Focus on Building Energy Policy

Directory of Open Access Journals (Sweden)

Daeho Kim

2014-08-01

Full Text Available Considerable effort is being made to reduce the primary energy consumption in buildings. As part of this effort, fuel cell systems are attracting attention as a new/renewable energy systems for several reasons: (i distributed generation system; (ii combined heat and power system; and (iii availability of various sources of hydrogen in the future. Therefore, this study aimed to develop an economic and environmental assessment model for selecting the optimal implementation strategy of the fuel cell system, focusing on building energy policy. This study selected two types of buildings (i.e., residential buildings and non-residential buildings as the target buildings and considered two types of building energy policies (i.e., the standard of energy cost calculation and the standard of a government subsidy. This study established the optimal implementation strategy of the fuel cell system in terms of the life cycle cost and life cycle CO2 emissions. For the residential building, it is recommended that the subsidy level and the system marginal price level be increased. For the non-residential building, it is recommended that gas energy cost be decreased and the system marginal price level be increased. The developed model could be applied to any other country or any other type of building according to building energy policy.

The Cost of Enforcing Building Energy Codes: Phase 2

Energy Technology Data Exchange (ETDEWEB)

Williams, Alison [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Sarah K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Vine, Ed [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2014-10-15

The purpose of this study is to present key findings regarding costs associated with enforcing building energy code compliance–primarily focusing on costs borne by local government. Building codes, if complied with, have the ability to save a significant amount of energy. However, energy code compliance rates have been significantly lower than 100%. Renewed interest in building energy codes has focused efforts on increasing compliance, particularly as a result of the 2009 American Recovery and Reinvestment Act (ARRA) requirement that in order for states to receive additional energy grants, they must have “a plan for the jurisdiction achieving compliance with the building energy code…in at least 90 percent of new and renovated residential and commercial building space” by 2017 (Public Law 111-5, Section 410(2)(C)). One study by the Institute for Market Transformation (IMT) estimated the costs associated with reaching 90% compliance to be $810 million, or $610 million in additional funding over existing expenditures, a non-trivial value. [Majersik & Stellberg 2010] In this context, Lawrence Berkeley National Laboratory (LBNL) conducted a study to better pinpoint the costs of enforcement through a two-phase process.

Cyberbullying Prevention and Intervention Efforts: Current Knowledge and Future Directions

Science.gov (United States)

Hong, Jun Sung

2016-01-01

Bullying is a serious public health concern that is associated with significant negative mental, social, and physical outcomes. Technological advances have increased adolescents’ use of social media, and online communication platforms have exposed adolescents to another mode of bullying—cyberbullying. Prevention and intervention materials, from websites and tip sheets to classroom curriculum, have been developed to help youth, parents, and teachers address cyberbullying. While youth and parents are willing to disclose their experiences with bullying to their health care providers, these disclosures need to be taken seriously and handled in a caring manner. Health care providers need to include questions about bullying on intake forms to encourage these disclosures. The aim of this article is to examine the current status of cyberbullying prevention and intervention. Research support for several school-based intervention programs is summarised. Recommendations for future research are provided. PMID:28562094

Cyberbullying Prevention and Intervention Efforts: Current Knowledge and Future Directions.

Science.gov (United States)

Espelage, Dorothy L; Hong, Jun Sung

2017-06-01

Bullying is a serious public health concern that is associated with significant negative mental, social, and physical outcomes. Technological advances have increased adolescents' use of social media, and online communication platforms have exposed adolescents to another mode of bullying- cyberbullying. Prevention and intervention materials, from websites and tip sheets to classroom curriculum, have been developed to help youth, parents, and teachers address cyberbullying. While youth and parents are willing to disclose their experiences with bullying to their health care providers, these disclosures need to be taken seriously and handled in a caring manner. Health care providers need to include questions about bullying on intake forms to encourage these disclosures. The aim of this article is to examine the current status of cyberbullying prevention and intervention. Research support for several school-based intervention programs is summarised. Recommendations for future research are provided.

Energy consumption in buildings for different sport activities

Energy Technology Data Exchange (ETDEWEB)

Norrfors, M; Werner, G; Oertenstrand, G

1978-01-01

Some buildings for different kinds of sport activities have a great energy demand. The actions which could be taken in order to decrease the energy demand and at the same time decrease the operating costs for these buildings are summarized. References are given to literature of current interest in this field.

Options to improve energy efficiency for educational building

Science.gov (United States)

Jahan, Mafruha

The cost of energy is a major factor that must be considered for educational facility budget planning purpose. The analysis of energy related issues and options can be complex and requires significant time and detailed effort. One way to facilitate the inclusion of energy option planning in facility planning efforts is to utilize a tool that allows for quick appraisal of the facility energy profile. Once such an appraisal is accomplished, it is then possible to rank energy improvement options consistently with other facility needs and requirements. After an energy efficiency option has been determined to have meaningful value in comparison with other facility planning options, it is then possible to utilize the initial appraisal as the basis for an expanded consideration of additional facility and energy use detail using the same analytic system used for the initial appraisal. This thesis has developed a methodology and an associated analytic model to assist in these tasks and thereby improve the energy efficiency of educational facilities. A detailed energy efficiency and analysis tool is described that utilizes specific university building characteristics such as size, architecture, envelop, lighting, occupancy, thermal design which allows reducing the annual energy consumption. Improving the energy efficiency of various aspects of an educational building's energy performance can be complex and can require significant time and experience to make decisions. The approach developed in this thesis initially assesses the energy design for a university building. This initial appraisal is intended to assist administrators in assessing the potential value of energy efficiency options for their particular facility. Subsequently this scoping design can then be extended as another stage of the model by local facility or planning personnel to add more details and engineering aspects to the initial screening model. This approach can assist university planning efforts to

Transboundary protected area proposals along the Southern Andes of Chile and Argentina: Status of current efforts

Science.gov (United States)

Peter Keller

2007-01-01

An evolving network of protected areas along the southern Andes of Chile and Argentina-the heart of Patagonia-are in various stages of evaluation and potential Transboundary Protected Area designations. This paper examines three such efforts. The first proposal is the North Andean-Patagonia Regional Eco-Corridor, which was the subject of a recent bilateral meeting...

On the efforts (man-day) concerned with inspection in uranium fuel fabrication facility

International Nuclear Information System (INIS)

Watanabe, T.; Tanaka, T.; Seki, Y.

1990-01-01

Taking notice of inspection efforts (man·day) of STA·IAEA and those of MNF concerned with them, their change and various factors affecting the change have been studied. Namely, first, main topics concerning inspection in our Tokai plant are mentioned and secondly the relation between the inspection efforts and such factors as PIV period, number of items, number of DA sampling and NDA measurements, and so forth is studied. According to our study, though efforts of STA·IAEA and MNF required for both routine FLOW inspection and PIT have been nearly unchanged each year, our efforts for PIV have been increasing gradually. The factors relating to this increase of our efforts are the PIV period, inspection efforts of STA·IAEA for PIV and the number of DA sampling and NDA measurements. Finally, a suggestion on the future inspection system has been mentioned and then some items for improvement under the current inspection system have been exemplified. (author)

Streamlining the Design-to-Build Transition with Build-Optimization Software Tools.

Science.gov (United States)

Oberortner, Ernst; Cheng, Jan-Fang; Hillson, Nathan J; Deutsch, Samuel

2017-03-17

Scaling-up capabilities for the design, build, and test of synthetic biology constructs holds great promise for the development of new applications in fuels, chemical production, or cellular-behavior engineering. Construct design is an essential component in this process; however, not every designed DNA sequence can be readily manufactured, even using state-of-the-art DNA synthesis methods. Current biological computer-aided design and manufacture tools (bioCAD/CAM) do not adequately consider the limitations of DNA synthesis technologies when generating their outputs. Designed sequences that violate DNA synthesis constraints may require substantial sequence redesign or lead to price-premiums and temporal delays, which adversely impact the efficiency of the DNA manufacturing process. We have developed a suite of build-optimization software tools (BOOST) to streamline the design-build transition in synthetic biology engineering workflows. BOOST incorporates knowledge of DNA synthesis success determinants into the design process to output ready-to-build sequences, preempting the need for sequence redesign. The BOOST web application is available at https://boost.jgi.doe.gov and its Application Program Interfaces (API) enable integration into automated, customized DNA design processes. The herein presented results highlight the effectiveness of BOOST in reducing DNA synthesis costs and timelines.

European database on indoor air pollution sources in buildings: Current status of database structure and software

NARCIS (Netherlands)

Molina, J.L.; Clausen, G.H.; Saarela, K.; Plokker, W.; Bluyssen, P.M.; Bishop, W.; Oliveira Fernandes, E. de

1996-01-01

the European Joule II Project European Data Base for Indoor Air Pollution Sources in Buildings. The aim of the project is to produce a tool which would be used by designers to take into account the actual pollution of the air from the building elements and ventilation and air conditioning system

Neutral currents

International Nuclear Information System (INIS)

Aubert, B.

1994-11-01

The evidence for the existence of weak neutral current has been a very controverted topics in the early 1970's, as well as the muon did in the 1930's. The history is very rich considering the evolution of the experimental techniques in high energy particle physics. The history of the discovery and the study of weak neutral current is reviewed. Later the quest of the intermediate vector boson continues with the decision of the community to build a large proton antiproton collider. (K.A.). 14 refs., 1 fig

Efforts of a Kansas foundation to increase physical activity and improve health by funding community trails, 2012.

Science.gov (United States)

Heinrich, Katie M; Lightner, Joseph; Oestman, Katherine B; Hughey, S Morgan; Kaczynski, Andrew T

2014-11-26

Trails are associated with increased physical activity; however, little is known about the process of building trails by various types of organizations. From 2005 through 2012 the Sunflower Foundation: Health Care for Kansans (Sunflower) funded multiple organizations to construct 70 trails of varying lengths and surfaces in municipalities, schools, and communities across Kansas. The purpose of this study was to assess the process of developing and implementing community trail projects across Kansas with funding from a public foundation. In 2012, we stratified funded organizations by type and conducted proportional random sampling to select 20 key informants from those organizations to participate in structured telephone interviews. Interviews were recorded and transcribed verbatim. Two researchers coded interview transcripts according to issues identified by participants. Issues associated with trail-building identified as important were collaboration among groups, unexpected construction costs, champions for the project, and level of difficulty of construction. Participants indicated that trails facilitated physical activity. Trails were integrated into communities through events such as walking events and other promotional efforts; these efforts were thought to increase trail use. The perceived outcomes of building the trails included providing the community with a physical activity resource, inspiring the community to start additional trail projects, and increasing the physical activity of local residents. Sunflower's funding was instrumental in developing trail projects to provide new physical activity resources across Kansas. Public health practitioners seeking to increase physical activity should seek funding from foundations that focus on health.

Venting krypton-85 from the Three Mile Island Unit 2 reactor building

International Nuclear Information System (INIS)

Burton, H.M.

1981-01-01

To permit the less restricted access to the reactor building necessary to maintain instrumentation and equipment, and to proceed towad the total decontamination of the facility, General Public Utilities, operators of the facility referred to hereafter as GPU, asked the United States Nuclear Regulatory Commission, or NRC, for permission to remove the 85 Kr from the reactor building by venting it to the environment. GPU supported their request with the Safety Analysis and Environmental Assessment Report on the proposed reactor building venting plan. On June 12, 1980, after seven months of licensing deliberations and numerous public hearings, the NRC granted GPU's request. The actual venting took place between June 28 and July 11, 1980. This report presents an overview of the detailed effort involved in the TMI-2 reactor building venting program. The findings reported here are condensed from a published report entitled TMI-2 Reactor Building Purge--Kr-85 Venting

Government regulation and associated innovations in building energy-efficiency supervisory systems for large-scale public buildings in a market economy

International Nuclear Information System (INIS)

Dai Xuezhi; Wu Yong; Di Yanqiang; Li Qiaoyan

2009-01-01

The supervision of energy efficiency in government office buildings and large-scale public buildings is the main embodiment for government implementation of Public Administration in the fields of resource saving and environmental protection. Aimed at improving the current situation of lack of government administration in building energy efficiency, this paper proposes the concept of 'change and redesign of governmental supervision in building energy efficiency', repositioning the role of government supervision. Based on this theory and other related theories in regulation economic and modern management, this paper analyzes and researches the action and function of all level governments in execution of the supervisory system of building energy efficiency in government office buildings and large-scale public buildings. This paper also defines the importance of government supervision in energy-efficiency system. Finally, this paper analyzes and researches the interaction mechanism between government and owners of different type buildings, government and energy-efficiency service institution with gambling as main features. This paper also presents some measurements to achieve a common benefit community in implementation of building energy-efficiency supervisory system.

Government regulation and associated innovations in building energy-efficiency supervisory systems for large-scale public buildings in a market economy

Energy Technology Data Exchange (ETDEWEB)

Dai Xuezhi [China Academy of Building Research, Beijing 100013 (China)], E-mail: daixz9999@126.com; Wu Yong [Ministry of Housing and Urban-Rural Development of the People' s Republic of China, Beijing 100835 (China); Di Yanqiang [China Academy of Building Research, Beijing 100013 (China); Li Qiaoyan [Department of Building, School of Design and Environment, National University of Singapore (Singapore)

2009-06-15

The supervision of energy efficiency in government office buildings and large-scale public buildings is the main embodiment for government implementation of Public Administration in the fields of resource saving and environmental protection. Aimed at improving the current situation of lack of government administration in building energy efficiency, this paper proposes the concept of 'change and redesign of governmental supervision in building energy efficiency', repositioning the role of government supervision. Based on this theory and other related theories in regulation economic and modern management, this paper analyzes and researches the action and function of all level governments in execution of the supervisory system of building energy efficiency in government office buildings and large-scale public buildings. This paper also defines the importance of government supervision in energy-efficiency system. Finally, this paper analyzes and researches the interaction mechanism between government and owners of different type buildings, government and energy-efficiency service institution with gambling as main features. This paper also presents some measurements to achieve a common benefit community in implementation of building energy-efficiency supervisory system.

Government regulation and associated innovations in building energy-efficiency supervisory systems for large-scale public buildings in a market economy

Energy Technology Data Exchange (ETDEWEB)

Dai, Xuezhi; Di, Yanqiang [China Academy of Building Research, Beijing 100013 (China); Wu, Yong [Ministry of Housing and Urban-Rural Development of the People' s Republic of China, Beijing 100835 (China); Li, Qiaoyan [Department of Building, School of Design and Environment, National University of Singapore (Singapore)

2009-06-15

The supervision of energy efficiency in government office buildings and large-scale public buildings is the main embodiment for government implementation of Public Administration in the fields of resource saving and environmental protection. Aimed at improving the current situation of lack of government administration in building energy efficiency, this paper proposes the concept of 'change and redesign of governmental supervision in building energy efficiency', repositioning the role of government supervision. Based on this theory and other related theories in regulation economic and modern management, this paper analyzes and researches the action and function of all level governments in execution of the supervisory system of building energy efficiency in government office buildings and large-scale public buildings. This paper also defines the importance of government supervision in energy-efficiency system. Finally, this paper analyzes and researches the interaction mechanism between government and owners of different type buildings, government and energy-efficiency service institution with gambling as main features. This paper also presents some measurements to achieve a common benefit community in implementation of building energy-efficiency supervisory system. (author)

Switching from static to adaptable and dynamic building envelopes: A paradigm shift for the energy efficiency in buildings

Directory of Open Access Journals (Sweden)

Marco Perino

2015-11-01

Full Text Available The key role of the building envelope in attaining building energy efficiency and satisfactory indoor comfort has long been established. Nevertheless, until recent times, all efforts and attention have mainly been focused on increasing and optimizing the thermal insulation of the envelope components. This strategy was a winning approach for a long time, but its limitations became obvious when users and designers started to consider the overall energy demand of a building and started to aim for Zero Energy Building (ZEB or nearly ZEB goals. New and more revolutionary concepts and technologies needed to be developed to satisfy such challenging requirements. The potential benefits of this technological development are relevant since the building envelope plays a key role in controlling the energy and mass flows from outdoors to indoors (and vice versa and, moreover, the facades offer a significant opportunity for solar energy exploitation. Several researches have demonstrated that the limitation of the existing facades could be overcome only by switching from ‘static’ to ‘responsive’ and ‘dynamic’ systems, such as Multifunctional Facade Modules (MFMs and Responsive Building Elements (RBE. These components are able to continuously and pro-actively react to outdoor and indoor environment conditions and facilitate and enhance the exploitation of renewable and low exergy sources. In order to reduce the energy demand, to maximize the indoor comfort conditions and to produce energy at the site, these almost ‘self-sufficient’, or even ‘positive energy’ building skins frequently incorporate different technologies and are functionally connected to other building services and installations. An overview of the technological evolution of the building envelope that has taken place, ranging from traditional components to the innovative skins, will be given in this paper, while focusing on the different approaches that have characterized this

The Future of Air Conditioning for Buildings - Executive Summary

Energy Technology Data Exchange (ETDEWEB)

Goetzler, William [Navigant Consulting Inc., Burlington, MA (United States); Guernsey, Matt [Navigant Consulting Inc., Burlington, MA (United States); Young, J. [Navigant Consulting Inc., Burlington, MA (United States); Fuhrman, J. [Navigant Consulting Inc., Burlington, MA (United States); Abdelaziz, Omar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-07-01

The Building Technologies Office (BTO), within the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy, works with researchers and industry to develop and deploy technologies that can substantially reduce energy consumption and greenhouse gas (GHG) emissions in residential and commercial buildings. Air conditioning (A/C) systems in buildings contribute to GHG emissions both directly through refrigerant emissions, as well as indirectly through fossil fuel combustion for power generation. BTO promotes pre-competitive research and development (R&D) on next-generation HVAC technologies that support the phase down of hydrofluorocarbon (HFC) production and consumption, as well as cost-effective energy efficiency improvements. Over the past several decades, product costs and lifecycle cooling costs have declined substantially in many global markets due to improved, higher-volume manufacturing and higher energy efficiency driven by R&D investments and efficiency policies including minimum efficiency standards and labeling programs.1 This report characterizes the current landscape and trends in the global A/C market, including discussion of both direct and indirect climate impacts, and potential global warming impacts from growing global A/C usage. The report also documents solutions that can help achieve international goals for energy efficiency and GHG emissions reductions. The solutions include pathways related to low-global warming potential2 (GWP) refrigerants, energy efficiency innovations, long-term R&D initiatives, and regulatory actions. DOE provides, with this report, a fact-based vision for the future of A/C use around the world. DOE intends for this vision to reflect a broad and balanced aggregation of perspectives. DOE brings together this content in an effort to support dialogue within the international community and help keep key facts and objectives at the forefront among the many important discussions.

Maximum effort in the minimum-effort game

Czech Academy of Sciences Publication Activity Database

Engelmann, Dirk; Normann, H.-T.

2010-01-01

Roč. 13, č. 3 (2010), s. 249-259 ISSN 1386-4157 Institutional research plan: CEZ:AV0Z70850503 Keywords : minimum-effort game * coordination game * experiments * social capital Subject RIV: AH - Economics Impact factor: 1.868, year: 2010

Using Authentic Science in the Classroom: NASA's Coordinated Efforts to Enhance STEM Education

Science.gov (United States)

Lawton, B.; Schwerin, T.; Low, R.

2015-11-01

A key NASA education goal is to attract and retain students in science, technology engineering, and mathematics (STEM) disciplines. When teachers engage students in the examination of authentic data derived from NASA satellite missions, they simultaneously build 21st century technology skills as well as core content knowledge about the Earth and space. In this session, we highlight coordinated efforts by NASA Science Mission Directorate (SMD) Education and Public Outreach (EPO) programs to enhance educator accessibility to data resources, distribute state-of -the-art data tools and expand pathways for educators to find and use data resources. The group discussion explores how NASA SMD EPO efforts can further improve teacher access to authentic NASA data, identifies the types of tools and lessons most requested by the community, and explores how communication and collaboration between product developers and classroom educators using data tools and products can be enhanced.

Data Preparation Process for the Buildings Performance Database

Energy Technology Data Exchange (ETDEWEB)

Walter, Travis; Dunn, Laurel; Mercado, Andrea; Brown, Richard E.; Mathew, Paul

2014-06-30

The Buildings Performance Database (BPD) includes empirically measured data from a variety of data sources with varying degrees of data quality and data availability. The purpose of the data preparation process is to maintain data quality within the database and to ensure that all database entries have sufficient data for meaningful analysis and for the database API. Data preparation is a systematic process of mapping data into the Building Energy Data Exchange Specification (BEDES), cleansing data using a set of criteria and rules of thumb, and deriving values such as energy totals and dominant asset types. The data preparation process takes the most amount of effort and time therefore most of the cleansing process has been automated. The process also needs to adapt as more data is contributed to the BPD and as building technologies over time. The data preparation process is an essential step between data contributed by providers and data published to the public in the BPD.

A Planning Tool for Estimating Waste Generated by a Radiological Incident and Subsequent Decontamination Efforts - 13569

International Nuclear Information System (INIS)

Boe, Timothy; Lemieux, Paul; Schultheisz, Daniel; Peake, Tom; Hayes, Colin

2013-01-01

Management of debris and waste from a wide-area radiological incident would probably constitute a significant percentage of the total remediation cost and effort. The U.S. Environmental Protection Agency's (EPA's) Waste Estimation Support Tool (WEST) is a unique planning tool for estimating the potential volume and radioactivity levels of waste generated by a radiological incident and subsequent decontamination efforts. The WEST was developed to support planners and decision makers by generating a first-order estimate of the quantity and characteristics of waste resulting from a radiological incident. The tool then allows the user to evaluate the impact of various decontamination/demolition strategies on the waste types and volumes generated. WEST consists of a suite of standalone applications and Esri R ArcGIS R scripts for rapidly estimating waste inventories and levels of radioactivity generated from a radiological contamination incident as a function of user-defined decontamination and demolition approaches. WEST accepts Geographic Information System (GIS) shape-files defining contaminated areas and extent of contamination. Building stock information, including square footage, building counts, and building composition estimates are then generated using the Federal Emergency Management Agency's (FEMA's) Hazus R -MH software. WEST then identifies outdoor surfaces based on the application of pattern recognition to overhead aerial imagery. The results from the GIS calculations are then fed into a Microsoft Excel R 2007 spreadsheet with a custom graphical user interface where the user can examine the impact of various decontamination/demolition scenarios on the quantity, characteristics, and residual radioactivity of the resulting waste streams. (authors)

Technology for Building Systems Integration and Optimization – Landscape Report

Energy Technology Data Exchange (ETDEWEB)

William Goetzler, Matt Guernsey, Youssef Bargach

2018-01-31

BTO's Commercial Building Integration (CBI) program helps advance a range of innovative building integration and optimization technologies and solutions, paving the way for high-performing buildings that could use 50-70% less energy than typical buildings. CBI’s work focuses on early stage technology innovation, with an emphasis on how components and systems work together and how whole buildings are integrated and optimized. This landscape study outlines the current body of knowledge, capabilities, and the broader array of solutions supporting integration and optimization in commercial buildings. CBI seeks to support solutions for both existing buildings and new construction, which often present very different challenges.

Scaling and allometry in the building geometries of Greater London

Science.gov (United States)

Batty, M.; Carvalho, R.; Hudson-Smith, A.; Milton, R.; Smith, D.; Steadman, P.

2008-06-01

Many aggregate distributions of urban activities such as city sizes reveal scaling but hardly any work exists on the properties of spatial distributions within individual cities, notwithstanding considerable knowledge about their fractal structure. We redress this here by examining scaling relationships in a world city using data on the geometric properties of individual buildings. We first summarise how power laws can be used to approximate the size distributions of buildings, in analogy to city-size distributions which have been widely studied as rank-size and lognormal distributions following Zipf [ Human Behavior and the Principle of Least Effort (Addison-Wesley, Cambridge, 1949)] and Gibrat [ Les Inégalités Économiques (Librarie du Recueil Sirey, Paris, 1931)]. We then extend this analysis to allometric relationships between buildings in terms of their different geometric size properties. We present some preliminary analysis of building heights from the Emporis database which suggests very strong scaling in world cities. The data base for Greater London is then introduced from which we extract 3.6 million buildings whose scaling properties we explore. We examine key allometric relationships between these different properties illustrating how building shape changes according to size, and we extend this analysis to the classification of buildings according to land use types. We conclude with an analysis of two-point correlation functions of building geometries which supports our non-spatial analysis of scaling.

LED Lightbulbs as a Source of Electricity Saving in Buildings

Directory of Open Access Journals (Sweden)

Zeb Akhtar

2016-01-01

Full Text Available Today a number of renewable energy technologies are available for power generation, but fossil fuels are still providing a dominant share nevertheless. In order to decrease the electric bill and save our environment, energy conservation is always crucial. In this paper a very interesting idea is presented which is economically viable to reduce electricity usage in our buildings. An effort has been made to estimate the amount of energy that could be saved in the dormitory section of the IMOP building in Russia. Although there are many ways to reduce the consumption of electricity in this building but here the emphasis is on changing light bulbs inside the rooms, kitchen, toilet and bathroom of each apartment. The scope of the study is to figure out monthly electricity saving by replacing traditional light bulbs by LED light bulbs in the building under consideration. The total investment required and the payback period is also presented.

Comparison of Building Energy Modeling Programs: Building Loads

Energy Technology Data Exchange (ETDEWEB)

Zhu, Dandan [Tsinghua Univ., Beijing (China); Hong, Tianzhen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yan, Da [Tsinghua Univ., Beijing (China); Wang, Chuang [Tsinghua Univ., Beijing (China)

2012-06-01

This technical report presented the methodologies, processes, and results of comparing three Building Energy Modeling Programs (BEMPs) for load calculations: EnergyPlus, DeST and DOE-2.1E. This joint effort, between Lawrence Berkeley National Laboratory, USA and Tsinghua University, China, was part of research projects under the US-China Clean Energy Research Center on Building Energy Efficiency (CERC-BEE). Energy Foundation, an industrial partner of CERC-BEE, was the co-sponsor of this study work. It is widely known that large discrepancies in simulation results can exist between different BEMPs. The result is a lack of confidence in building simulation amongst many users and stakeholders. In the fields of building energy code development and energy labeling programs where building simulation plays a key role, there are also confusing and misleading claims that some BEMPs are better than others. In order to address these problems, it is essential to identify and understand differences between widely-used BEMPs, and the impact of these differences on load simulation results, by detailed comparisons of these BEMPs from source code to results. The primary goal of this work was to research methods and processes that would allow a thorough scientific comparison of the BEMPs. The secondary goal was to provide a list of strengths and weaknesses for each BEMP, based on in-depth understandings of their modeling capabilities, mathematical algorithms, advantages and limitations. This is to guide the use of BEMPs in the design and retrofit of buildings, especially to support China’s building energy standard development and energy labeling program. The research findings could also serve as a good reference to improve the modeling capabilities and applications of the three BEMPs. The methodologies, processes, and analyses employed in the comparison work could also be used to compare other programs. The load calculation method of each program was analyzed and compared to

Energy Performance and CO2 Emissions of HVAC Systems in Commercial Buildings

Directory of Open Access Journals (Sweden)

Rafat Al-Waked

2017-10-01

Full Text Available Energy performance of buildings has attracted much attention among building physicists and engineers worldwide. The effects of building heating; ventilation; and air conditioning (HVAC systems’ design upgrade on the building energy performance are the focus of the current study. The adopted HVAC system consisted of chilled ceiling and chilled beam systems served by a centrifugal water chiller. An energy simulation study was undertaken in accordance with the national Australian built environment rating system-rules for collecting and using data. A three-dimensional simulation study was carried out utilizing the virtual environment-integrated environmental solutions software. Results from the current study have shown the importance of utilizing energy-efficient HVAC systems and HVAC strategies for achieving a high building energy star rating. Recommended strategies in order to achieve the nominated star rating; as predicted by the simulation analysis; were presented. Moreover; the effects of solar radiation inside the building atrium were significant; which cannot be overcome by simply installing a low shading coefficient glazing type at the atrium skylight. In addition to providing chilled ceiling technology; a high efficiency chiller and low energy lighting; it is recommended that the building be well tuned during the commissioning period. The current approach could be extended to accommodate higher energy ratings of commercial buildings at different locations worldwide.

Comparison of Buildings\\' Thermal Loads against Building Orientations for Sustainable Housing in Pakistan

Directory of Open Access Journals (Sweden)

Arif Khan

2012-07-01

Full Text Available As the sustainable settlements have been included as a vital end product of all planning exercises, the architectural layouts should be well integrated with the sun path charts and the orientations of windows. Appropriate orientations can offer thermally indoor conditions besides physical and psychological comfort in any settlement at lesser energy demand. This investigation uses a vast number of computer simulations to visualize and make better decisions about heating and cooling requirements of a building and facades as a function of window orientation in composite climatic condition of Lahore. This study in particular evaluates the solar load in residential buildings responsive to the objective of sustainable new housing leading to thoughtful integration of architecture. The orientation of the buildings could then be essentially integrated to the current architectural and urban design practices in order to optimize the relationship between the given site ant the orientations for sustainable developments.

Radon in public buildings; Radon in oeffentlichen Gebaeuden

Energy Technology Data Exchange (ETDEWEB)

Schulz, H.; Flesch, K. [IAF - Radiooekologie GmbH, Dresden (Germany); Hermann, E. [B.P.S. Engineering GmbH, Zwickau (Germany); Loebner, W. [Wismut GmbH, Chemnitz (Germany); Leissring, B. [Bergtechnisches Ingenieurbuero GEOPRAX, Chemnitz (Germany)

2009-07-01

From the Free State of Saxony, a study was commissioned to survey how reliable measurements to characterize the radon situation in public buildings at a reasonable financial and human effort can be carried out to reduce radiation exposure in public buildings. The study approach was for 6 objects. To characterize the radon situation the time evolution measurement of radon concentrations of more than 1 to 2 weeks turned out to be sufficient. A novel data analysis enables the identification of a ''typical daily alteration of the radon concentration'' depending on the ventilation conditions and the daily use of the offices or class rooms. The identification of typical diurnal radon variations for the working time and weekends or holidays is of fundamental importance for assessing the exposure situation in public buildings. It was shown that the radon concentration during working time are in general much lower than in the times when the buildings (offices) are unused. It turned out that the long-term radon measurements with nuclear track detectors within distinct time regimes (day / night, working hours / leisure time) by utilizing switch modules are very efficient to estimate the actual exposure. (orig.)

Development of a California commercial building benchmarking database

Energy Technology Data Exchange (ETDEWEB)

Kinney, Satkartar; Piette, Mary Ann

2002-05-17

Building energy benchmarking is a useful starting point for commercial building owners and operators to target energy savings opportunities. There are a number of tools and methods for benchmarking energy use. Benchmarking based on regional data can provides more relevant information for California buildings than national tools such as Energy Star. This paper discusses issues related to benchmarking commercial building energy use and the development of Cal-Arch, a building energy benchmarking database for California. Currently Cal-Arch uses existing survey data from California's Commercial End Use Survey (CEUS), a largely underutilized wealth of information collected by California's major utilities. Doe's Commercial Building Energy Consumption Survey (CBECS) is used by a similar tool, Arch, and by a number of other benchmarking tools. Future versions of Arch/Cal-Arch will utilize additional data sources including modeled data and individual buildings to expand the database.

Changing reproductive effort within a semelparous reproductive episode.

Science.gov (United States)

Hughes, P William; Simons, Andrew M

2014-08-01

• Life-history theory predicts a trade-off between current and future reproduction for iteroparous organisms-as individuals age, the expected value of future reproduction declines, and thus reproductive effort is expected to be higher in later clutches than in earlier. In contrast, models explaining the evolution of semelparity treat semelparous reproduction as instantaneous, with no scope for intraindividual variation. However, semelparous reproduction is also extended, but over shorter time scales; whether there are similar age- or stage-specific changes in reproductive effort within a semelparous episode is unclear. In this study, we assessed whether semelparous individuals increase reproductive effort as residual reproductive value declines by comparing the reproductive phenotype of flowers at five different floral positions along a main inflorescence.• Using the herbaceous monocarp Lobelia inflata, we conducted a longitudinal study of 409 individuals including both laboratory and field populations over three seasons. We recorded six reproductive traits-including the length of three phenological intervals as well as fruit size, seed size, and seed number-for all plants across floral positions produced throughout the reproductive episode.• We found that while the rate of flower initiation did not change, flowers at distal (late) floral positions developed more quickly and contained larger seed than flowers at basal (early) floral positions did.• Our results were consistent with the hypothesis that, like iteroparous organisms, L. inflata increases reproductive effort in response to low residual reproductive value. © 2014 Botanical Society of America, Inc.

Building Blocks for Transport-Class Hybrid and Turboelectric Vehicles

Science.gov (United States)

Jankovsky, Amy; Bowman, Cheryl; Jansen, Ralph

2016-01-01

NASA has been investing in research efforts to define potential vehicles that use hybrid and turboelectric propulsion to enable savings in fuel burn and carbon usage. This paper overviews the fundamental building blocks that have been derived from those studies and details what key performance parameters have been defined, what key ground and flight tests need to occur, and highlights progress toward each.

Building Ecoliteracy Through Adiwiyata Program (Study at Adiwiyata School in Banda Aceh

Directory of Open Access Journals (Sweden)

Mirza Desfandi

2017-07-01

Full Text Available This study is back grounded by importance of ecoliteracy for each individual. One of comprehensive efforts to build ecoliteracy in community is through Adiwiyata Program. This study is aimed to find out how the effectiveness of Adiwiyata Program in the effort to build students’ ecoliteracy in Banda Aceh. The method which is used is survey. The study is conducted in ten schools, with respondents are principal, teachers, administrative staff and students. Data analysis is done descriptively toward five variable and hypothesis test use nonparametric statistic test. The result of study showed that there is significant influence of school policy, curriculum implementation, school culture and school infrastructure management toward students’ ecoliteracy. The findings of study is the more effective four components of Adiwiyata is implemented, the higher of students’ecoliteracy. Therefore, four components of Adiwiyata should be implemented maximally, among other by strengthening Adiwiyata school team.

Rapid prototyping in order to improve building performance simulation for detailed design support

NARCIS (Netherlands)

Hopfe, C.J.; Hensen, J.L.M.; Stankov, P.

2006-01-01

Building performance simulation (BPS) is a powerful tool to support building and system designers in emulating how orientation, building type, HVAC system etc. interacts the overall building performance. Currently BPS is used only for code compliance in the detailed design, neither to make informed

20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

Science.gov (United States)

2010-04-01

... capacity building and technical assistance efforts aimed at improving the competencies of the personnel who... developed with funds under this section are made available to be shared with other States, SDA's and the... contributing to the National Network. (2) All shared costs shall be allocated among the contributing funding...

Distributed energy resources at naval base ventura county building 1512

International Nuclear Information System (INIS)

Bailey, Owen C.; Marnay, Chris

2004-01-01

This paper reports the findings of a preliminary assessment of the cost effectiveness of distributed energy resources at Naval Base Ventura County (NBVC) Building 1512. This study was conducted in response to the base's request for design assistance to the Federal Energy Management Program. Given the current tariff structure there are two main decisions facing NBVC: whether to install distributed energy resources (DER), or whether to continue the direct access energy supply contract. At the current effective rate, given assumptions about the performance and structure of building energy loads and available generating technology characteristics, the results of this study indicate that if the building installed a 600 kW DER system with absorption cooling and heat capabilities chosen by cost minimization, the energy cost savings would be about 14 percent, or $55,000 per year. However, under current conditions, this study also suggests that significant savings could be obtained if Building 1 512 changed from the direct access contract to a SCE TOU-8 (Southern California Edison time of use tariff number 8) rate without installing a DER system. At current SCE TOU-8 tariffs, the potential savings from installation of a DER system would be about 4 percent, or $15,000 per year

Grand Junction Projects Office Remedial Action Project Building 2 public dose evaluation. Final report

International Nuclear Information System (INIS)

Morris, R.

1996-05-01

Building 2 on the U.S. Department of Energy (DOE) Grand Junction Projects Office (GJPO) site, which is operated by Rust Geotech, is part of the GJPO Remedial Action Program. This report describes measurements and modeling efforts to evaluate the radiation dose to members of the public who might someday occupy or tear down Building 2. The assessment of future doses to those occupying or demolishing Building 2 is based on assumptions about future uses of the building, measured data when available, and predictive modeling when necessary. Future use of the building is likely to be as an office facility. The DOE sponsored program, RESRAD-BUILD, Version. 1.5 was chosen for the modeling tool. Releasing the building for unrestricted use instead of demolishing it now could save a substantial amount of money compared with the baseline cost estimate because the site telecommunications system, housed in Building 2, would not be disabled and replaced. The information developed in this analysis may be used as part of an as low as reasonably achievable (ALARA) cost/benefit determination regarding disposition of Building 2

Zero Energy Building Pays for Itself: Odyssey Elementary

Energy Technology Data Exchange (ETDEWEB)

Torcellini, Paul A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-08-09

Odyssey Elementary is a large public school in an area of Utah with a growing population. Created as a prototype for the Davis School District, Odyssey is a zero energy building whose design has already been copied for two other new schools, both of which are targeting zero energy. It has a unique design with four 'houses' (or classroom wings) featuring generously daylit classrooms. This design contributes to the school's energy efficiency. In an effort to integrate positive messages about fitness into the learning environment, each house has a different take on the theme of 'bodies in motion' in the natural world. In a postoccupancy survey of parents, students, and teachers, more than 87% were satisfied with the building overall.

Environmental Conditions and Occupant Perceptions in European Office Buildings

Energy Technology Data Exchange (ETDEWEB)

Stoops, J.L. [Chalmers Univ. of Tech., Goeteborg (Sweden). Dept. of Building Services Engineering

2003-03-01

This is a preliminary report regarding a portion of the environmental conditions and occupant comfort perceptions from a five nation, 26 building European field data collection effort. Approximately 1,000 participants were involved in this project which included twelve monthly visits to each building. Climate, building and cultural variation will be illustrated for the five countries involved - France, Greece, Portugal, Sweden and the United Kingdom (UK). Each country used identical instrumentation; questionnaires and experimental protocols imbedded in a custom hardware/software system. The comfort survey was based on the ASHRAE model. The physical measurements included air temperature, globe temperature, relative humidity, air movement, CO{sub 2}, light, and sound levels. Where possible, connections and explanations between variables are made. Potential energy and policy ramifications are illustrated. (The publication includes two reports from EU JOULE III projects JOE3CT970066 'Smart controls and thermal comfort project)

RedeAmericas: building research capacity in young leaders for sustainable growth in community mental health services in Latin America.

Science.gov (United States)

Yang, L; Pratt, C; Valencia, E; Conover, S; Fernández, R; Burrone, M S; Cavalcanti, M T; Lovisi, G; Rojas, G; Alvarado, R; Galea, S; Price, L N; Susser, E

2017-01-01

The purpose of this paper is to describe the development and initial accomplishments of a training program of young leaders in community mental health research as part of a Latin American initiative known as RedeAmericas. RedeAmericas was one of five regional 'Hubs' funded by the National Institute of Mental Health (NIMH) to improve community mental health care and build mental health research capacity in low- and middle-income countries. It included investigators in six Latin American cities - Santiago, Chile; Medellín, Colombia; Rio de Janeiro, Brazil; and Córdoba, Neuquén, and Buenos Aires in Argentina - working together with a team affiliated with the Global Mental Health program at Columbia University in New York City. One component of RedeAmericas was a capacity-building effort that included an Awardee program for early career researchers in the mental health field. We review the aims of this component, how it developed, and what was learned that would be useful for future capacity-building efforts, and also comment on future prospects for maintaining this type of effort.

The Radon Book. Preventive measures in new buildings

International Nuclear Information System (INIS)

Clavensjoe, Bertil; Aakerblom, Gustav

2004-01-01

This book describes in text and picture how one can prevent that the radon concentrations in new buildings become to high. The book's centre of gravity lies on how to build in order to prevent that radon gas from the ground enters the building. The book contains extensive information about ground radon and how to examine the ground before constructing a new building. Release of radon from ground water and construction material is treated, as well as technology for measurement of radon and gamma radiation. The book presents current threshold values/recommended values for radon and the authorities' regulations and recommendations. The book is directed to persons who professionally need knowledge about radon and how to prevent that radon is accumulated in new buildings

Building a future : First Nations communities look to oilsands developers for jobs, business partnerships, and much more

Energy Technology Data Exchange (ETDEWEB)

Stonehouse, D.

2009-02-15

This article reported on socio-economic factors related to the expansion of oilsands development in northeastern Alberta. Despite massive investment into the region, local First Nations communities continue to struggle economically. Living conditions on reserves are substandard, education is below provincial levels and unemployment remains high. In 1998, First Nations communities formed the Athabasca Tribal Council (ATC)Industry Agreement Group to build capacity in the 5 First Nations making up the ATC to deal with the challenges of oilsands development. In 2003, a new agreement was initiated in which central economic development efforts were decentralized, allowing money to be spent at the band level. Industry relations offices were set up in each community to consult with industry and identify areas of concern. The broad issues were reducing unemployment on reserves and the social side of capacity building. The 5 Athabasca First Nations are currently working to develop entrepreneurship in the communities through the ATC's Economic Development department. They are in a good position to get money in place to ensure the future sustainability of their communities. 3 figs.

Futuragua: Fostering Cross-Scale Knowledge to Inform Social-Environmental Decision Processes for Building Drought Resilience in Highly Seasonal Environments

Science.gov (United States)

McDaniels, T.; Steyn, D. G.; Johnson, M. S.; Small, M.; Leclerc, G.; Vignola, R.; Chan, K.; Grossmann, I.; Wong-Parodi, G.

2014-12-01

Improving resilience to drought in complex social-environmental systems (SES) is extraordinarily important, particularly for rural tropical locations where small changes in climate regimes can have dramatic SES impacts. Efforts to build drought resilience must necessarily be planned and implemented within SES governance systems that involve linkages in water and land use administration from local to national levels. These efforts require knowledge and understanding that links climate and weather forecasts to regional and local hydrology, to social-economic and environmental systems, and to governance processes. In order to provide structure for such complex choices and investments, we argue that a focus on structured decision processes that involve linkages among science, technological perspectives, and public values conducted with agencies and stakeholders will provide a crucial framework for comparing and building insight for pursuing alternative courses of action to build drought resilience. This paper focuses on a regional case study in the seasonally-dry northwest region of Costa Rica, in watersheds rated as most threatened in the country in terms of drought. We present the overall framework guiding the transdisciplinary efforts to link scientific and technical understanding to public values, in order to foster civil society actions that lead to improved drought resilience. Initial efforts to characterize hydrological and climate regimes will be reported along with our approach to linking natural science findings, social inventories in terms of perspectives on SES, and the psychology and patterns of reliance on forecast information that provide the basis for characterizing public understanding. The overall linkage of technical and value information is focused on creating and comparing alternative actions that can potentially build resilience in short and long time frames by building decision making processes involving stakeholders, agencies and interested

California's historic effort to reduce the stigma of mental illness: the Mental Health Services Act.

Science.gov (United States)

Clark, Wayne; Welch, Stephanie N; Berry, Sandra H; Collentine, Ann M; Collins, Rebecca; Lebron, Dorthy; Shearer, Amy L

2013-05-01

In a historic effort to reduce the stigma of mental illness, California voters approved the Mental Health Services Act in 2004. The law funds a comprehensive statewide prevention initiative that places stigma and discrimination reduction at its center, with 25 projects providing interventions at the institutional, societal, and individual levels. Stakeholders selected specific strategies from the research-based California Strategic Plan on Reducing Stigma and Discrimination. Strategies range from social marketing to increase public knowledge to capacity building at the local level, including training that emphasizes participation by consumers of mental health services and cultural competence. Collectively, these strategies aim to foster permanent change in the public perception of mental illness and in the individual experience of stigma. We examined the context, planning, programming, and evaluation of this effort.

Collecting memories of the city through the conservation of heritage building

Science.gov (United States)

Nurliani Lukito, Yulia; Nurul Rizky, Amalia

2018-03-01

Heritage building has a role for the city and the society that is associated with emotional, cultural, and use values. Those values are parts of collective memory and create the identity of the city. Some heritage buildings are vulnerable to modernization and even when the government conserves those buildings, some important values of the buildings are lost. This paper discusses a colonial building in Jakarta that has been converted into different functions. As a case study is Cut Meutia Mosque in Menteng, designed by a Dutch architect PAJ Moojen during the Dutch late colonial era. The building was initiated in 1922 as N.V. Bouwploeg, an architectural firm that developed the nearby residential area of New Gondangdia. This area was developed according to modern Garden City principles and the Bouwploeg was known as the gate to Menteng area and the architecture of the building was considered very modern and unique at that time – illustrating the importance of the building for the city. After Indonesia’s independence, the government converted the building into different functions such as an office and a mosque. Although the function of the building has changed, the building is still related to triggering a collective memory of the new area that should not be ignored in the effort of conserving the building. Through historical and field research, the paper aims to discuss some changes and lost values of the building as the result of conserving the colonial heritage, especially about collective memory. Hopefully, learning from the conservation of building heritage and city collective memory may support the idea of livable memory of heritage building and even a

Economic Energy Savings Potential in Federal Buildings

Energy Technology Data Exchange (ETDEWEB)

Brown, Daryl R.; Dirks, James A.; Hunt, Diane M.

2000-09-04

The primary objective of this study was to estimate the current life-cycle cost-effective (i.e., economic) energy savings potential in Federal buildings and the corresponding capital investment required to achieve these savings, with Federal financing. Estimates were developed for major categories of energy efficiency measures such as building envelope, heating system, cooling system, and lighting. The analysis was based on conditions (building stock and characteristics, retrofit technologies, interest rates, energy prices, etc.) existing in the late 1990s. The potential impact of changes to any of these factors in the future was not considered.

Analysing methodological choices in calculations of embodied energy and GHG emissions from buildings

DEFF Research Database (Denmark)

Rasmussen, Freja Nygaard; Malmqvist, Tove; Moncaster, Alice

2018-01-01

The importance of embodied energy and embodied greenhouse gas emissions (EEG) from buildings is gaining increased interest within building sector initiatives and on a regulatory level. In spite of recent har- monisation efforts, reported results of EEG from building case studies display large...... obtained, thus providing a framework for reinterpretation and more effective comparison. The collection of over 80 international case studies developed within the International Energy Agency’s EBC Annex 57 research programme is used as the quantitative foundation to present a comprehensive analysis......, and the combination potentials between these many parameters signifies a multitude of ways in which the outcome of EEG studies are affected....

Post-earthquake building safety inspection: Lessons from the Canterbury, New Zealand, earthquakes

Science.gov (United States)

Marshall, J.; Jaiswal, Kishor; Gould, N.; Turner, F.; Lizundia, B.; Barnes, J.

2013-01-01

The authors discuss some of the unique aspects and lessons of the New Zealand post-earthquake building safety inspection program that was implemented following the Canterbury earthquake sequence of 2010–2011. The post-event safety assessment program was one of the largest and longest programs undertaken in recent times anywhere in the world. The effort engaged hundreds of engineering professionals throughout the country, and also sought expertise from outside, to perform post-earthquake structural safety inspections of more than 100,000 buildings in the city of Christchurch and the surrounding suburbs. While the building safety inspection procedure implemented was analogous to the ATC 20 program in the United States, many modifications were proposed and implemented in order to assess the large number of buildings that were subjected to strong and variable shaking during a period of two years. This note discusses some of the key aspects of the post-earthquake building safety inspection program and summarizes important lessons that can improve future earthquake response.

Passive hygrothermal control of a museum storage building in Vejle

DEFF Research Database (Denmark)

Christensen, Jørgen Erik; Janssen, Hans

2010-01-01

and maintenance costs are currently motivating a paradigm change toward passive control. Passive control, via the thermal and hygric inertia of the building, is gaining a foothold in the museum conservation and building physical community. In this report we document the hygrothermal performance optimisation...... of a museum storage building, related to an existing storage centre in Vejle (Denmark). The current building design already incorporates passive control concepts: thermal inertia is provided by the thick walls, the ground floor and its underlying soil volume, while hygric inertia is provided by the thick...... with the thermal inertia of the ground and thus a higher temperature variation; For those reasons, more heavily insulated walls and roofs could be considered. Their effects on the interior climate and dehumidification load are however not that large. For the floor, no insulation should be added, and it could...

Intelligence, integration & industrialisation for the building services technologies of the future

DEFF Research Database (Denmark)

Marsh, Rob

2007-01-01

The hypothesis of this paper is that the construction sector's industrial transformation needs to focus on integrating building services technologies in the buildings of the future. This can be achieved by analysing developments in intelligent building services, exploring design strategies...... for effectively integrating building services, and by developing new industrialised solutions for building services technologies. This paper is based on current Danish research and practice, and it is based on linking research knowledge on building services to knowledge on user needs, building design and new...

Development of phase change materials based microencapsulated technology for buildings: A review

Energy Technology Data Exchange (ETDEWEB)

Tyagi, V.V.; Kaushik, S.C. [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India); Tyagi, S.K. [School of Infrastructure Technology and Resource Management, Shri Mata Vaishno Devi University, Katra 182320, J and K (India); Akiyama, T. [Center for Advanced Research of Energy Conversion Materials, Hokkaido University, Kita 13, Nishi 8, Kita-ku, Sapporo 060-86283 (Japan)

2011-02-15

Thermal energy storage (TES) systems using phase change material (PCM) have been recognized as one of the most advanced energy technologies in enhancing the energy efficiency and sustainability of buildings. Now the research is focus on suitable method to incorporate PCMs with building. There are several methods to use phase change materials (PCMs) in thermal energy storage (TES) for different applications. Microencapsulation is one of the well known and advanced technologies for better utilization of PCMs with building parts, such as, wall, roof and floor besides, within the building materials. Phase change materials based microencapsulation for latent heat thermal storage (LHTS) systems for building application offers a challenging option to be employed as effective thermal energy storage and a retrieval device. Since the particular interest in using microencapsulation PCMs for concrete and wall/wallboards, the specific research efforts on both subjects are reviewed separately. This paper presents an overview of the previous research work on microencapsulation technology for thermal energy storage incorporating the phase change materials (PCMs) in the building applications, along with few useful conclusive remarks concluded from the available literature. (author)

U.S., Russia join efforts to clean up nuclear sites

International Nuclear Information System (INIS)

Richard Seltzer.

1993-01-01

U.S. and Russian scientists are stepping up their cooperative efforts to deal with a vexing and controversial problem in both nations--cleanup of radioactive wastes at former nuclear weapons production sites. Last month, a top-level delegation of Russian officials and scientists came to the U.S. for two weeks. They visited Washington, D.C., and the Department of Energy's (DOE) Hanford site in Washington State, studying U.S. cleanup activities and providing information on Russian problems and efforts. The visit was part of a program of exchanges in the areas of environmental restoration and waste management called for by a 1990 memorandum of cooperation between DOE and the Russian Ministry of Atomic Energy. The memo helps implement a U.S.-Russian collaborative agreement on peaceful uses of atomic energy. Currently, cooperation under the memo exists in four areas: vitrification, waste separation, contaminant transport modeling, and student-scientist exchanges. The paper summarizes the visit to the Hanford Reservation and describes the cleanup efforts there

Building 549 Becomes the Backdrop for an Updated Mural | Poster

Science.gov (United States)

Next time you walk through Building 549 at the National Cancer Institute at Frederick campus, make sure you check out the bright new mural adorning the walls outside the auditorium. A collaboration between the Office of Scientific Operations and Scientific Publications, Graphics and Media, the mural evokes the goals and efforts of the Frederick National Lab and NCI at