Nanoarchitectured current collector for high rate capability of polyaniline based supercapacitor electrode

International Nuclear Information System (INIS)

Sumboja, Afriyanti; Wang Xu; Yan Jian; Lee, Pooi See

2012-01-01

Highlights: ► Preparation of organic/inorganic coaxial nanowires. ► Modifying current collector to improve both capacitance and rate capability simultaneously. ► Improvement in the charge transport process resulted in the superior rate capability. - Abstract: Indium tin oxide (ITO) nanowires array was used as current collector and building block for polyaniline based supercapacitor. Thin polyaniline coating was deposited on the nanowires and resulted in the formation of polyaniline ITO coaxial nanowires. This hybrid heterostructure design improved the specific capacitance, rate capability, and cycling stability of the supercapacitor electrode. Good conductivity harnessed by these directly grown ITO nanowires is useful to improve the charge transport during the charge discharge processes which were confirmed by the electrochemical impedance spectroscopy measurement. Electrochemical test in 1 M H 2 SO 4 at 4 A g −1 delivered specific capacitance as high as 738 F g −1 . In addition, sub-micron size of the intercoaxial nanowires spacing ensures the fast penetration of electrolyte ions which resulted in the superior rate capability (98% capacitance retention when applied current was varied from 4 to 25 A g −1 ). The capacitance retention is significantly higher as compared to other polyaniline composite electrodes and it is one of the best reported performances to date for polyaniline based supercapacitor electrodes. This work illustrates a promising platform that can be adopted for other redox nanocomposite materials while reaping the benefit as low cost and binder free electrode material for supercapacitor application.

Current capabilities of transient two-phase flow instruments

International Nuclear Information System (INIS)

Solbrig, C.W.; Kondic, N.N.

1979-01-01

The measurement of two phase flow phenomena in transient conditions representative of a Loss-of-Coolant Accident requires the use of sophisticated instruments and the further development of other instruments. Measurements made in large size pipes are often flow regime dependent. The flow regimes encountered depend upon the system geometry, transient effects, heat transfer, etc. The geometries in which these measurements must be made, the instruments which are currently used, new instruments being developed, the facilities used to calibrate these instruments, and the improvements which must be made to measurement capabilities are described

Characterization of LH induced current carrying fast electrons in JET

Energy Technology Data Exchange (ETDEWEB)

Ramponi, G.; Airoldi, A. [Consiglio Nazionale delle Ricerche, Milan (Italy). Lab. di Fisica del Plasma; Bartlett, D.; Brusati, M.; Froissard, P.; Gormezano, C.; Rimini, F.; Silva, R.P. da; Tanzi, C.P. [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking

1992-12-31

Lower Hybrid Current Drive (LHCD) experiments have recently been made at JET by coupling up to 2.4 MW of RF power at 3.7 GHz, with a power spectrum centered at n{sub ||} = 1.8 {+-} 0.2 corresponding to a resonating electron energy of about 100 keV via Electron Landau Damping. The Current Drive (CD) efficiency has been observed to increase when LH and ICRH power are applied simultaneously to the plasma, suggesting that a part of the fast magnetosonic wave is absorbed on the LH-generated fast electrons. An important problem of CD experiments in tokamaks is the determination of the radial distribution of the driven current and the characterization in the momentum space of the current carrying fast electrons by using appropriate diagnostic tools. For this purpose, a combined analysis of the Electron Cyclotron Emission (ECE) and of the Fast Electron Bremsstrahlung (FEB) measurements has been made, allowing the relevant parameters of the suprathermal electrons to be estimated. (author) 5 refs., 5 figs., 2 tabs.

Characterization of LH induced current carrying fast electrons in JET

International Nuclear Information System (INIS)

Ramponi, G.; Airoldi, A.; Bartlett, D.; Brusati, M.; Froissard, P.; Gormezano, C.; Rimini, F.; Silva, R.P. da; Tanzi, C.P.

1992-01-01

Lower Hybrid Current Drive (LHCD) experiments have recently been made at JET by coupling up to 2.4 MW of RF power at 3.7 GHz, with a power spectrum centered at n || = 1.8 ± 0.2 corresponding to a resonating electron energy of about 100 keV via Electron Landau Damping. The Current Drive (CD) efficiency has been observed to increase when LH and ICRH power are applied simultaneously to the plasma, suggesting that a part of the fast magnetosonic wave is absorbed on the LH-generated fast electrons. An important problem of CD experiments in tokamaks is the determination of the radial distribution of the driven current and the characterization in the momentum space of the current carrying fast electrons by using appropriate diagnostic tools. For this purpose, a combined analysis of the Electron Cyclotron Emission (ECE) and of the Fast Electron Bremsstrahlung (FEB) measurements has been made, allowing the relevant parameters of the suprathermal electrons to be estimated. (author) 5 refs., 5 figs., 2 tabs

Deformation of current-carrying jets by nonviscous electrically conducting fluid

International Nuclear Information System (INIS)

Morozova, V.I.

1986-01-01

The change in the form of the transverse cross section of the jet under the action of the current flowing along it is investigated. The reults of computations for solitary current carrying jets of square and rectangular cross sections, and for systems of six and twelve azimuthally periodic jets with currents alternating in direction, are shown in figures. A solitary jet with square transverse cross section at the initial instant executes a periodic motion involving transition from square cross section, through circular, back to square rotated by 45 0 with respect to the initial section, and later going through circular cross section and returning to the initial position is shown in a figure. Other figures show similar deformations occuring with a solitary rectangular cross section, and deformations of the systems of jets which are accompanied by their radial separation. The authors note that the present formulation uses only geometric criteria of similarity; therefore the dependences of the deformations on time, presented in figures, are universal

Nonlinear calculation of the M=1 internal kink instability in current carrying stellarators

International Nuclear Information System (INIS)

Wakatani, M.

1978-02-01

Nonlinear properties of the m = 1 internal kink mode are shown in a low β current carrying stellarator. The effects of the external helical magnetic fields are considered through a rotational transform and the magnetic surface is assumed to be circular. Magnetic surfaces inside the iota sub(h) + iota sub(σ) = 1 surface shift and deform non-circularly, while magnetic surfaces outside the iota sub(h) + iota sub(σ) = 1 are not disturbed, where iota sub(h) is a rotational transform due to helical magnetic fields and iota sub(σ) is due to a plasma current. Many higher harmonics are excited after the fundamental mode saturates. When the external helical magnetic fields are lowered, the m = 1 tearing mode similar to that in a low β tokamak grows and magnetic islands appear near the iota sub(h) + iota sub(σ) = 1 surface. For adequate helical magnetic fields, the current carrying stellarator becomes stable against both the m = 1 internal kink mode and the m = 1 tearing mode, without lowering the rotational transform. (auth.)

Evaluation of carrying capacity and territorial environmental sustainability

Directory of Open Access Journals (Sweden)

Giuseppe Ruggiero

2012-09-01

Full Text Available Land use has a great impact on environmental quality, use of resources, state of ecosystems and socio-economic development. Land use can be considered sustainable if the environmental pressures of human activities do not exceed the ecological carrying capacity. A scientific knowledge of the capability of ecosystems to provide resources and absorb waste is a useful and innovative means of supporting territorial planning. This study examines the area of the Province of Bari to estimate the ecosystems’ carrying capacity, and compare it with the current environmental pressures exerted by human activities. The adapted methodology identified the environmentally sustainable level for one province.

On the Behaviour of Current-Carrying Wire-Conductors and Bucking of a Column

DEFF Research Database (Denmark)

Ganji, S. S.; Barari, Amin; Fereidoon, A.

2013-01-01

This paper applies approximate analytical methods namely Iteration Perturbation Method (IPM), variational approach (VA) and Parameter Expanding Method (PEM) to Single-Degree-Of-Freedom (SDOF) nonlinear oscillation systems. Some numerical cases as dynamic behavior of current-carrying wire-conductors...

Upgrades, Current Capabilities and Near-Term Plans of the NASA ARC Mars Climate

Science.gov (United States)

Hollingsworth, J. L.; Kahre, Melinda April; Haberle, Robert M.; Schaeffer, James R.

2012-01-01

We describe and review recent upgrades to the ARC Mars climate modeling framework, in particular, with regards to physical parameterizations (i.e., testing, implementation, modularization and documentation); the current climate modeling capabilities; selected research topics regarding current/past climates; and then, our near-term plans related to the NASA ARC Mars general circulation modeling (GCM) project.

Coordination between Fault-Ride-Through Capability and Over-current Protection of DFIG Generators for Wind Farms

DEFF Research Database (Denmark)

Bak-Jensen, Birgitte; Kawady, T.A.; Abdel-Rahman, Mansour Hassan

2010-01-01

is investigated. Simulation test cases using MATLAB-Simulink are implemented on a 365-MW wind farm in AL-Zaafarana, Egypt. The simulation results show the influence of the FRT capability on the protective relaying coordination in wind farms, showing that the FRT may work in situations where is were expected......Fault Ride-Through (FRT) capabilities set up according to the grid codes may affect the performance of related protective elements during fault periods. Therefore, in this paper the coordination between the FRT capability and over-current protection of DFIG Wind Generators in MV networks...... not to work, and then disabling the over-current protection, which should have worked in this situation....

One hundred fold increase in current carrying capacity in a carbon nanotube-copper composite

Science.gov (United States)

Subramaniam, Chandramouli; Yamada, Takeo; Kobashi, Kazufumi; Sekiguchi, Atsuko; Futaba, Don N.; Yumura, Motoo; Hata, Kenji

2013-07-01

Increased portability, versatility and ubiquity of electronics devices are a result of their progressive miniaturization, requiring current flow through narrow channels. Present-day devices operate close to the maximum current-carrying-capacity (that is, ampacity) of conductors (such as copper and gold), leading to decreased lifetime and performance, creating demand for new conductors with higher ampacity. Ampacity represents the maximum current-carrying capacity of the object that depends both on the structure and material. Here we report a carbon nanotube-copper composite exhibiting similar conductivity (2.3-4.7 × 105Scm-1) as copper (5.8 × 105Scm-1), but with a 100-times higher ampacity (6 × 108Acm-2). Vacuum experiments demonstrate that carbon nanotubes suppress the primary failure pathways in copper as observed by the increased copper diffusion activation energy (~2.0eV) in carbon nanotube-copper composite, explaining its higher ampacity. This is the only material with both high conductivity and high ampacity, making it uniquely suited for applications in microscale electronics and inverters.

Study on ac losses of HTS coil carrying ac transport current

International Nuclear Information System (INIS)

Dai Taozhen; Tang Yuejin; Li Jingdong; Zhou Yusheng; Cheng Shijie; Pan Yuan

2005-01-01

Ac loss has an important influence on the thermal performances of HTS coil. It is necessary to quantify ac loss to ascertain its impact on coil stability and for sizing the coil refrigeration system. In this paper, we analyzed in detail the ac loss components, hysteresis loss, eddy loss and flux flow loss in the pancake HTS coil carrying ac transport current by finite element method. We also investigated the distribution of the ac losses in the coil to study the effects of magnetic field distribution on ac losses

Current Capabilities and Capacity of Ebola Treatment Centers in the United States.

Science.gov (United States)

Herstein, Jocelyn J; Biddinger, Paul D; Kraft, Colleen S; Saiman, Lisa; Gibbs, Shawn G; Le, Aurora B; Smith, Philip W; Hewlett, Angela L; Lowe, John J

2016-03-01

To describe current Ebola treatment center (ETC) locations, their capacity to care for Ebola virus disease patients, and infection control infrastructure features. A 19-question survey was distributed electronically in April 2015. Responses were collected via email by June 2015 and analyzed in an electronic spreadsheet. The survey was sent to and completed by site representatives of each ETC. The survey was sent to all 55 ETCs; 47 (85%) responded. Of the 47 responding ETCs, there are 84 isolation beds available for adults and 91 for children; of these pediatric beds, 35 (38%) are in children's hospitals. In total, the simultaneous capacity of the 47 reporting ETCs is 121 beds. On the basis of the current US census, there are 0.38 beds per million population. Most ETCs have negative pressure isolation rooms, anterooms, and a process for category A waste sterilization, although only 11 facilities (23%) have the capability to sterilize infectious waste on site. Facilities developed ETCs on the basis of Centers for Disease Control and Prevention guidance, but specific capabilities are not mandated at this present time. Owing to the complex and costly nature of Ebola virus disease treatment and variability in capabilities from facility to facility, in conjunction with the lack of regulations, nationwide capacity in specialized facilities is limited. Further assessments should determine whether ETCs can adapt to safely manage other highly infectious disease threats.

Pulsed currents carried by whistlers. IV. Electric fields and radiation excited by an electrode

International Nuclear Information System (INIS)

Stenzel, R.L.; Urrutia, J.M.; Rousculp, C.L.

1995-01-01

Electromagnetic properties of current pulses carried by whistler wave packets are obtained from a basic laboratory experiment. While the magnetic field and current density are described in the preceding companion paper (Part III), the present analysis starts with the electric field. The inductive and space charge electric field contributions are separately calculated in Fourier space from the measured magnetic field and Ohm's law along B 0 . Inverse Fourier transformation yields the total electric field in space and time, separated into rotational and divergent contributions. The space-charge density in whistler wave packets is obtained. The cross-field tensor conductivity is determined. The frozen-in condition is nearly satisfied, E+v e xB congruent 0. The dissipation is obtained from Poynting's theorem. The waves are collisionally damped; Landau damping is negligible. A radiation resistance for the electrode is determined. Analogous to Poynting's theorem, the transport of helicity is analyzed. Current helicity is generated by a flow of helicity between pulses traveling in opposite directions which carry opposite signs of helicity. Helicity is dissipated by collisions. These observations complete a detailed description of whistler/current pulses which can occur in various laboratory and space plasmas. copyright 1995 American Institute of Physics

Estimates of the field-aligned current density in current-carrying filaments using auroral zone ground-based observations

Directory of Open Access Journals (Sweden)

M. A. Danielides

Full Text Available We described the ground signatures of dynamic substorm features as observed by the imaging riometer, magnetometers and all-sky camera (ASC at Kilpisjärvi, Finland on 5 and 25 October 1999 during the late evening hours. The magnetometer data was consistent with the motion of up-ward field-aligned currents (FACs associated with absorption patches moving within the field of view of the riometer. We used riometer data in order to estimate the intensity of FACs associated with these local current-carrying filaments. It is shown that during these events, the estimated FAC intensity exceeds a threshold value that corresponds to the excitation of the low-frequency turbulence in the upper ionosphere. As a result, a quasi-oscillating regime of anomalous resistivity on the auroral field lines can give rise to the burst-like electron acceleration responsible for simultaneously observed auroral forms and bursts of Pi1B pulsations.

Key words. Ionosphere (active experiments; auroral ionosphere; electric fields and currents

Building EOS capability for Malaysia - the options

Science.gov (United States)

Subari, M. D.; Hassan, A.

2014-06-01

Earth observation satellite (EOS) is currently a major tool to monitor earth dynamics and increase human understanding of earth surface process. Since the early 80s, Malaysia has been using EOS images for various applications, such as weather forecasting, land use mapping, agriculture, environment monitoring and others. Until now, all EOS images were obtained from foreign satellite systems. Realising on the strategic need of having its own capability, Malaysia embarked into EOS development programs in the early 90s. Starting with TiungSAT-1, a micro-satellite carrying small camera, then followed by RazakSAT, a small satellite carrying 2.5 m panchromatic (PAN) medium-aperture-camera, the current satellite program development, the RazakSAT-2, designed to carry a 1.0 m high resolution PAN and 4.0m multi-spectral camera, would become a strategic initiative of the government in developing and accelerating the nation's capability in the area of satellite technology and its application. Would this effort continue until all needs of the remote sensing community being fulfilled by its own EOS? This paper will analyze the intention of the Malaysian government through its National Space Policy and other related policy documents, and proposes some policy options on this. Key factors to be considered are specific data need of the EOS community, data availability and the more subjective political motivations such as national pride.

Technology development and commercial production of current-carrying elements on the basis of Nb3Sn superconductor

International Nuclear Information System (INIS)

Nikulin, A.D.; Shikov, A.K.; Davydov, I.I.

1995-01-01

A description of a current carrying element intended for Tokamak-15 magnetic system is presented. The element is produced from multicore wires with superconducting Nb 3 Sn cores and calculated for 8.5 kA critical current in magnetic field of 8 T. Main processing procedures of its manufacturing are shown. Extrusion conditions needed for production of composite bronze-niobium rods and multicore wire 1.5 mm in diameter with 14641 niobium cores are determined. Heat treatment used results in formation of Nb 3 Sn intermetallics and assures maximal current-carrying capacity of 910-920 A in 8 T magnetic field. 15 refs., 9 figs

Charged Particle Dynamics in the Magnetic Field of a Long Straight Current-Carrying Wire

Science.gov (United States)

Prentice, A.; Fatuzzo, M.; Toepker, T.

2015-01-01

By describing the motion of a charged particle in the well-known nonuniform field of a current-carrying long straight wire, a variety of teaching/learning opportunities are described: 1) Brief review of a standard problem; 2) Vector analysis; 3) Dimensionless variables; 4) Coupled differential equations; 5) Numerical solutions.

U.S. Sodium Fast Reactor Codes and Methods: Current Capabilities and Path Forward

Energy Technology Data Exchange (ETDEWEB)

Brunett, A. J.; Fanning, T. H.

2017-06-26

The United States has extensive experience with the design, construction, and operation of sodium cooled fast reactors (SFRs) over the last six decades. Despite the closure of various facilities, the U.S. continues to dedicate research and development (R&D) efforts to the design of innovative experimental, prototype, and commercial facilities. Accordingly, in support of the rich operating history and ongoing design efforts, the U.S. has been developing and maintaining a series of tools with capabilities that envelope all facets of SFR design and safety analyses. This paper provides an overview of the current U.S. SFR analysis toolset, including codes such as SAS4A/SASSYS-1, MC2-3, SE2-ANL, PERSENT, NUBOW-3D, and LIFE-METAL, as well as the higher-fidelity tools (e.g. PROTEUS) being integrated into the toolset. Current capabilities of the codes are described and key ongoing development efforts are highlighted for some codes.

Emissions from heavy current carrying high density plasma and their diagnostics

International Nuclear Information System (INIS)

Hirano, Katsumi

1987-06-01

Workshop on ''Emissions from heavy current carrying high density plasma and diagnostics'' was held at Institute of Plasma Physics, Nagoya University on 3. and 4. December 1986 under a collaborating research Program. The workshop was attended by 43 researchers from 19 labolatories. A total of 22 papers were submitted and are presented in these proceedings. The largest group of papers was that on soft X-ray emission. It seems this topic is a foremost interest for groups which engaged in research of the Z pinch and the plasma focus. A variety of problems in pinched dense plasmas, namely spectroscopy, diagnostics, pinch dynamics, and related engineering aspects were also discussed. (author)

Current Capabilities, Requirements and a Proposed Strategy for Interdependency Analysis in the UK

Science.gov (United States)

Bloomfield, Robin; Chozos, Nick; Salako, Kizito

The UK government recently commissioned a research study to identify the state-of-the-art in Critical Infrastructure modelling and analysis, and the government/industry requirements for such tools and services. This study (Cetifs) concluded with a strategy aiming to bridge the gaps between the capabilities and requirements, which would establish interdependency analysis as a commercially viable service in the near future. This paper presents the findings of this study that was carried out by CSR, City University London, Adelard LLP, a safety/security consultancy and Cranfield University, defense academy of the UK.

Building EOS capability for Malaysia – the options

International Nuclear Information System (INIS)

Subari, M D; Hassan, A

2014-01-01

Earth observation satellite (EOS) is currently a major tool to monitor earth dynamics and increase human understanding of earth surface process. Since the early 80s, Malaysia has been using EOS images for various applications, such as weather forecasting, land use mapping, agriculture, environment monitoring and others. Until now, all EOS images were obtained from foreign satellite systems. Realising on the strategic need of having its own capability, Malaysia embarked into EOS development programs in the early 90s. Starting with TiungSAT-1, a micro-satellite carrying small camera, then followed by RazakSAT, a small satellite carrying 2.5 m panchromatic (PAN) medium-aperture-camera, the current satellite program development, the RazakSAT-2, designed to carry a 1.0 m high resolution PAN and 4.0m multi-spectral camera, would become a strategic initiative of the government in developing and accelerating the nation's capability in the area of satellite technology and its application. Would this effort continue until all needs of the remote sensing community being fulfilled by its own EOS? This paper will analyze the intention of the Malaysian government through its National Space Policy and other related policy documents, and proposes some policy options on this. Key factors to be considered are specific data need of the EOS community, data availability and the more subjective political motivations such as national pride

Promoting practical clinical management learning: the current situation about Information and Communications Technology capability development in student nurses.

Science.gov (United States)

Willmer, Marian

2005-11-01

This paper is about work-based learning in information management for student nurses. It seeks, through a literature review, to make a case for and promote Information and Communications Technology capability development in student nurses within their clinical environment. The profession of nursing, like many other jobs, is facing the increasing usage of information technology in day-to-day operations. Admission and discharges of patients have been held on computer databases since at least the 1980s. With the new Labour Government in 1997, increasing focus was placed on the effectiveness of the National Health Service and using computers as one way to assist in achieving greater effectiveness. Nurse education therefore needed to reflect this need and support trainee nurses to acquire skills in Information and Communications Technology. This paper is part of an ongoing professional doctorate inquiry into Information and Communications Technology capability development in student nurses. A literature search was conducted on teaching information and technology skills via Cumulative Index to Nursing and Allied Health Literature. Most of the available studies were neither based on the UK nor were they about student nurses. As there is a dearth of published work in this specific area, relevant, related and tangential literature was reviewed. It is argued that current practice and published work on Information and Communications Technology capability development by student nurses hardly exists. The literature confirmed that success in this area requires sound change management, an understanding of National Health Service culture, and effective people leadership skills. Nurse educators and managers need to pay more attention to understand how organizations work, particularly organizations where student nurses carry out their work. As the search revealed a significant gap in the literature in this area, a practical conceptual framework to fully analyse, develop and

High-voltage integrated linear regulator with current sinking capabilities for portable ultrasound scanners

DEFF Research Database (Denmark)

Pausas, Guifre Vendrell; Llimos Muntal, Pere; Jørgensen, Ivan Harald Holger

2017-01-01

This paper presents a high-voltage integrated regulator capable of sinking current for driving pulse-triggered level shifters in drivers for ultrasound applications. The regulator utilizes a new topology with a feedback loop and a current sinking circuit to satisfy the requirements of the portable....... The proposed design has been implemented in high-voltage 0.18 μm process whithin an area of 0.11 mm2 and it is suitable for system-on-chip integration due to its low component count and the fully integrated design....

Electron heat transport in current carrying and currentless thermonuclear plasmas. Tokamaks and stellarators compared

International Nuclear Information System (INIS)

Peters, M.

1996-01-01

In the first experiment the plasma current in the RTP tokamak is varied. Here the underlying idea was to check whether at a low plasma current, transport in the tokamak resembles transport in stellarators more than at higher currents. Secondly, experiments have been done to study the relation of the diffusivity χ to the temperature and its gradient in both W7-AS and RTP. In this case the underlying idea was to find the explanation for the phenomenon observed in both tokamaks and stellarators that the quality of the confinement degrades when more heating is applied. A possible explanation is that the diffusivity increases with the temperature or its gradient. Whereas in standard tokamak and stellarator experiments the temperature and its gradient are strongly correlated, a special capability of the plasma heating system of W7-AS and RTP can force them to decouple. (orig.)

Electron heat transport in current carrying and currentless thermonuclear plasmas. Tokamaks and stellarators compared

Energy Technology Data Exchange (ETDEWEB)

Peters, M

1996-01-16

In the first experiment the plasma current in the RTP tokamak is varied. Here the underlying idea was to check whether at a low plasma current, transport in the tokamak resembles transport in stellarators more than at higher currents. Secondly, experiments have been done to study the relation of the diffusivity {chi} to the temperature and its gradient in both W7-AS and RTP. In this case the underlying idea was to find the explanation for the phenomenon observed in both tokamaks and stellarators that the quality of the confinement degrades when more heating is applied. A possible explanation is that the diffusivity increases with the temperature or its gradient. Whereas in standard tokamak and stellarator experiments the temperature and its gradient are strongly correlated, a special capability of the plasma heating system of W7-AS and RTP can force them to decouple. (orig.).

Evolution of ion-acoustic potential well in a current-carrying plasma

International Nuclear Information System (INIS)

Maslov, V.I.

1990-01-01

Properties and evolution of nonlinear correlated collective disturbance of potential well in current-carrying limited plasma are described. Study shows, that potential well intensifies while exchanging energy with resonance electrons reflecting from it with distribution unstable function. In this case, electron deficiency occurs ahead of the well and electron excess - behined it due to asymmetry, relatively to well velocity, of distribution function of electrons injected at boundaries, in velocity space and due to their reflection from well. Quasineutrality is reduced by self-congruent formation of potential jump within well range. With amplitude growth at its essential values the well is braked. Similar pattern of localized disturbance evolution was observed during numerical and laboratory experiments

On the possibility of a relativistic correction to the E and B fields around a current-carrying wire

International Nuclear Information System (INIS)

Folman, Ron

2013-01-01

It is well known that electric and magnetic fields may change when they are observed from different frames of reference. For example, the motion of a charged probe particle moving parallel to a current-carrying wire would be described by utilizing different electric or magnetic fields, depending on from which frame of reference the system is observed and described. To describe the situation in all frames by utilizing the theory of relativity, one has to first describe the situation in one particular frame, and this choice in the case of a current-carrying wire is the topic of this paper. Specifically, I consider the question of in which frame the current carrying wire is neutral. The importance of relaxation processes is emphasized. As an example, I examine a specific alternative to the standard choice, and consider its theoretical and experimental validity. An outcome of alternative approaches is that in the rest frame of a wire, running a current introduces also an electric field by giving rise to a minute charge. Present day experimental sensitivities, specifically those of cold ions, may be able to differentiate between the observable signatures predicted by the different approaches.

Graphene-on-diamond devices with increased current-carrying capacity: carbon sp2-on-sp3 technology.

Science.gov (United States)

Yu, Jie; Liu, Guanxiong; Sumant, Anirudha V; Goyal, Vivek; Balandin, Alexander A

2012-03-14

Graphene demonstrated potential for practical applications owing to its excellent electronic and thermal properties. Typical graphene field-effect transistors and interconnects built on conventional SiO(2)/Si substrates reveal the breakdown current density on the order of 1 μA/nm(2) (i.e., 10(8) A/cm(2)), which is ~100× larger than the fundamental limit for the metals but still smaller than the maximum achieved in carbon nanotubes. We show that by replacing SiO(2) with synthetic diamond, one can substantially increase the current-carrying capacity of graphene to as high as ~18 μA/nm(2) even at ambient conditions. Our results indicate that graphene's current-induced breakdown is thermally activated. We also found that the current carrying capacity of graphene can be improved not only on the single-crystal diamond substrates but also on an inexpensive ultrananocrystalline diamond, which can be produced in a process compatible with a conventional Si technology. The latter was attributed to the decreased thermal resistance of the ultrananocrystalline diamond layer at elevated temperatures. The obtained results are important for graphene's applications in high-frequency transistors, interconnects, and transparent electrodes and can lead to the new planar sp(2)-on-sp(3) carbon-on-carbon technology. © 2012 American Chemical Society

Analogue Between Dynamic Hamiltonian-Operators of a Mesoscopic Ring Carrying Persistent Current and a Josephson Junction

International Nuclear Information System (INIS)

Fan Hongyi; Wang Jisuo

2006-01-01

By making the analogy between the operator Hamiltonians of a mesoscopic ring carrying the persistent current and a Josephson junction we have introduced a phase operator and entangled state representation to establish a theoretical formalism for the ring system.

Dynamic capabilities, Marketing Capability and Organizational Performance

Directory of Open Access Journals (Sweden)

Adriana Roseli Wünsch Takahashi

2017-01-01

Full Text Available The goal of the study is to investigate the influence of dynamic capabilities on organizational performance and the role of marketing capabilities as a mediator in this relationship in the context of private HEIs in Brazil. As a research method we carried out a survey with 316 IES and data analysis was operationalized with the technique of structural equation modeling. The results indicate that the dynamic capabilities have influence on organizational performance only when mediated by marketing ability. The marketing capability has an important role in the survival, growth and renewal on educational services offerings for HEIs in private sector, and consequently in organizational performance. It is also demonstrated that mediated relationship is more intense for HEI with up to 3,000 students and other organizational profile variables such as amount of courses, the constitution, the type of institution and type of education do not significantly alter the results.

Fault Ride-through Capability Enhancement of Voltage Source Converter-High Voltage Direct Current Systems with Bridge Type Fault Current Limiters

Directory of Open Access Journals (Sweden)

Md Shafiul Alam

2017-11-01

Full Text Available This paper proposes the use of bridge type fault current limiters (BFCLs as a potential solution to reduce the impact of fault disturbance on voltage source converter-based high voltage DC (VSC-HVDC systems. Since VSC-HVDC systems are vulnerable to faults, it is essential to enhance the fault ride-through (FRT capability with auxiliary control devices like BFCLs. BFCL controllers have been developed to limit the fault current during the inception of system disturbances. Real and reactive power controllers for the VSC-HVDC have been developed based on current control mode. DC link voltage control has been achieved by a feedback mechanism such that net power exchange with DC link capacitor is zero. A grid-connected VSC-HVDC system and a wind farm integrated VSC-HVDC system along with the proposed BFCL and associated controllers have been implemented in a real time digital simulator (RTDS. Symmetrical three phase as well as different types of unsymmetrical faults have been applied in the systems in order to show the effectiveness of the proposed BFCL solution. DC link voltage fluctuation, machine speed and active power oscillation have been greatly suppressed with the proposed BFCL. Another significant feature of this work is that the performance of the proposed BFCL in VSC-HVDC systems is compared to that of series dynamic braking resistor (SDBR. Comparative results show that the proposed BFCL is superior over SDBR in limiting fault current as well as improving system fault ride through (FRT capability.

Expansion of a multicomponent current-carrying plasma jet into vacuum

International Nuclear Information System (INIS)

Krasov, V. I.; Paperny, V. L.

2017-01-01

An expression for the ion−ion coupling in a multicomponent plasma jet is derived for an arbitrary ratio between the thermal and relative velocities of the components. The obtained expression is used to solve the problem on the expansion of a current-carrying plasma microjet emitted from the cathode surface into vacuum. Two types of plasmas with two ion components are analyzed: (i) plasma in which the ion components of equal masses are in the charge states Z 1 = +1 and Z 2 = +2 and (ii) plasma with ions in equal charge states but with the mass ratio m 1 /m 2 = 2. It is shown that, for such plasmas, the difference between the velocities of the plasma components remains substantial (about 10% of the average jet velocity in case (i) and 15% in case (ii)) at distances of several centimeters from the emission center, where it can be measured experimentally, provided that its initial value at the emitting cathode surface exceeds a certain threshold. This effect is investigated as a function of the mass ratio and charge states of the ion components.

ELECTROMECHANICAL TRANSIENT PROCESSES DURING SUPPLY VOLTAGE CHANGING IN THE SYSTEM OF POLYMER INSULATION COVERING OF THE CURRENT-CARRYING CORE OF ULTRA HIGH VOLTAGE CABLES

Directory of Open Access Journals (Sweden)

V. M. Zolotaryov

2018-04-01

Full Text Available Aim. The article is devoted to the analysis of the electromechanical transient processes in a system of three frequency-controlled electric drives based on asynchronous motors that control current-carrying core motion, as well as to the study of the effect of such processes on the modes applying three-layer polymer insulation to the current-carrying core. Technique. The study was conducted based on the concepts of electromechanics, electromagnetic field theory, mathematical physics, mathematical modeling. Results. A mathematical model has been developed to analyze transients in an electromechanical system consisting of three frequency-controlled electric drives providing current-carrying core motion of ultra-high voltage cables in an inclined extrusion line. The coordination of the electromechanical parameters of the system drives has been carried out and the permissible changes in the supply voltage at the limiting mass while moving current-carrying core of ultra-high voltage cables with applied polymer insulation have been estimated. Scientific novelty. For the first time it is determined that with the limiting mass of the current-carrying core, the electromechanical system allows to stabilize the current-carrying core speed with the required accuracy at short-term decreases in the supply voltage by no more than 27 % of its amplitude value. It is also shown that this system is resistant to short-term increases in voltage by 32 % for 0.2 s. Practical significance. Using the developed model, it is possible to calculate the change in the configuration and speed of the slack current-carrying core when applying polymer insulation, depending on the specific mass of the current-carrying core per unit length, its tension at the bottom, the torque of the traction motor and the supply voltage to achieve stable operation of the system and accurate working of the set parameters.

Expansion of a multicomponent current-carrying plasma jet into vacuum

Energy Technology Data Exchange (ETDEWEB)

Krasov, V. I.; Paperny, V. L., E-mail: paperny@math.isu.runnet.ru [Irkutsk State University (Russian Federation)

2017-03-15

An expression for the ion−ion coupling in a multicomponent plasma jet is derived for an arbitrary ratio between the thermal and relative velocities of the components. The obtained expression is used to solve the problem on the expansion of a current-carrying plasma microjet emitted from the cathode surface into vacuum. Two types of plasmas with two ion components are analyzed: (i) plasma in which the ion components of equal masses are in the charge states Z{sub 1}= +1 and Z{sub 2}= +2 and (ii) plasma with ions in equal charge states but with the mass ratio m{sub 1}/m{sub 2} = 2. It is shown that, for such plasmas, the difference between the velocities of the plasma components remains substantial (about 10% of the average jet velocity in case (i) and 15% in case (ii)) at distances of several centimeters from the emission center, where it can be measured experimentally, provided that its initial value at the emitting cathode surface exceeds a certain threshold. This effect is investigated as a function of the mass ratio and charge states of the ion components.

Phonon induced optical gain in a current carrying two-level quantum dot

Energy Technology Data Exchange (ETDEWEB)

Eskandari-asl, Amir, E-mail: amir.eskandari.asl@gmail.com [Department of Physics, Shahid Beheshti University, G.C. Evin, Tehran 1983963113 (Iran, Islamic Republic of); School of Nano Science, Institute for Research in Fundamental Sciences (IPM), P.O. Box: 19395-5531, Tehran, Iran (Iran, Islamic Republic of)

2017-05-15

In this work we consider a current carrying two level quantum dot (QD) that is coupled to a single mode phonon bath. Using self-consistent Hartree-Fock approximation, we obtain the I-V curve of QD. By considering the linear response of our system to an incoming classical light, we see that depending on the parametric regime, the system could have weak or strong light absorption or may even show lasing. This lasing occurs at high enough bias voltages and is explained by a population inversion considering side bands, while the total electron population in the higher level is less than the lower one. The frequency at which we have the most significant lasing depends on the level spacing and phonon frequency and not on the electron-phonon coupling strength.

Unsteady single-phase natural circulation flow mixing prediction using CATHARE three-dimensional capabilities

Energy Technology Data Exchange (ETDEWEB)

Salah, Anis Bousbia; Vlassenbroeck, Jacques [Bel V - Subsidiary of the Belgian Federal Agency for Nuclear Contro, Brussels (Belize)

2017-04-15

Coolant mixing under natural circulation flow regime constitutes a key parameter that may play a role in the course of an accidental transient in a nuclear pressurized water reactor. This issue has motivated some experimental investigations carried out within the OECD/NEA PKL projects. The aim was to assess the coolant mixing phenomenon in the reactor pressure vessel downcomer and the core lower plenum under several asymmetric steady and unsteady flow conditions, and to provide experimental data for code validations. Former studies addressed the mixing phenomenon using, on the one hand, one-dimensional computational approaches with cross flows that are not fully validated under transient conditions and, on the other hand, expensive computational fluid dynamic tools that are not always justified for large-scale macroscopic phenomena. In the current framework, an unsteady coolant mixing experiment carried out in the Rossendorf coolant mixing test facility is simulated using the three-dimensional porous media capabilities of the thermal–hydraulic system CATHARE code. The current study allows highlighting the current capabilities of these codes and their suitability for reproducing the main phenomena occurring during asymmetric transient natural circulation mixing conditions.

Forces on a current-carrying wire in a magnetic field: the macro-micro connection

DEFF Research Database (Denmark)

Avelar Sotomaior Karam, Ricardo; Kneubil, Fabiana; Robilotta, Manoel

2017-01-01

The classic problem of determining the force on a current-carrying wire in a magnetic field is critically analysed. A common explanation found in many introductory textbooks is to represent the force on the wire as the sum of the forces on charge carriers. In this approach neither the nature...... of the forces involved nor their application points are fully discussed. In this paper we provide an alternative microscopic explanation that is suitable for introductory electromagnetism courses at university level. By considering the wire as a superposition of a positive and a negative cylindrical charge...

Non-axisymmetric equilibrium reconstruction and suppression of density limit disruptions in a current-carrying stellarator

Science.gov (United States)

Ma, Xinxing; Ennis, D. A.; Hanson, J. D.; Hartwell, G. J.; Knowlton, S. F.; Maurer, D. A.

2017-10-01

Non-axisymmetric equilibrium reconstructions have been routinely performed with the V3FIT code in the Compact Toroidal Hybrid (CTH), a stellarator/tokamak hybrid. In addition to 50 external magnetic measurements, 160 SXR emissivity measurements are incorporated into V3FIT to reconstruct the magnetic flux surface geometry and infer the current distribution within the plasma. Improved reconstructions of current and q profiles provide insight into understanding the physics of density limit disruptions observed in current-carrying discharges in CTH. It is confirmed that the final scenario of the density limit of CTH plasmas is consistent with classic observations in tokamaks: current profile shrinkage leads to growing MHD instabilities (tearing modes) followed by a loss of MHD equilibrium. It is also observed that the density limit at a given current linearly increases with increasing amounts of 3D shaping fields. Consequently, plasmas with densities up to two times the Greenwald limit are attained. Equilibrium reconstructions show that addition of 3D fields effectively moves resonance surfaces towards the edge of the plasma where the current profile gradient is less, providing a stabilizing effect. This work is supported by US Department of Energy Grant No. DE-FG02-00ER54610.

Capabilities for innovation

DEFF Research Database (Denmark)

Nielsen, Peter; Nielsen, Rene Nesgaard; Bamberger, Simon Grandjean

2012-01-01

is a survey that collected information from 601 firms belonging to the private urban sector in Denmark. The survey was carried out in late 2010. Keywords: dynamic capabilities/innovation/globalization/employee/employer cooperation/Nordic model Acknowledgment: The GOPA study was financed by grant 20080053113......Technological developments combined with increasing levels of competition related to the ongoing globalization imply that firms find themselves in dynamic, changing environments that call for dynamic capabilities. This challenges the internal human and organizational resources of firms in general...

Effect mutual carrying away of electrons and photons on thermomagnet and thermoelectric phenomena in semiconductors with generated statistics of current carriers

International Nuclear Information System (INIS)

Kuliev, I.G.

2000-01-01

One studied the effects of the mutual carrying away of electrons and phonons on the thermomagnetic and thermoelectric phenomena in semiconductors with the degenerated statistics of current carriers. One estimated the conduction current within nonequilibrium electron-phonon system in the linear approximation on the basis of the degeneration parameter. Under the isothermal conductors the mutual carrying away was shown to affect essentially the values of the Nernst-Ettingshausen effects. One estimated the heat flow and analyzed the dependence of heat conductivity and of the Muggy-Regge (MR) effect on the magnetic field. The contribution of the mutual carrying away into the isothermal MR-effect was determined to be proportional to the degeneration parameter. One studied thermomagnetic and thermoelectric effects in the degenerated conductors with regard to the mutual carrying away of electrons and phonons both under the isothermal and under the adiabatic conditions [ru

The ESA River & Lake System: Current Capabilities and Future Potential

DEFF Research Database (Denmark)

Smith, Richard G.; Salloway, Mark; Berry, Philippa A. M.

Measuring the earth's river and lake resources using satellite radar altimetry offers a unique global monitoring capability, which complements the detailed measurements made by the steadily decreasing number of in-situ gauges. To exploit this unique remote monitoring capability, a global pilot...

Calibration of magnetic force microscopy tips by using nanoscale current-carrying parallel wires

International Nuclear Information System (INIS)

Kebe, Th.; Carl, A.

2004-01-01

Experimental results on the characterization of commercially available magnetic force microscopy (MFM) thin film tips as a function of an external magnetic field are presented. Magnetic stray fields with a definitive z-component (perpendicular to the substrate) and a magnetic field strength of up to H z =±45 Oe are produced with current carrying parallel nanowires with a thickness of t=60 nm, which are fabricated by electron-beam lithography. The magnetic fields are generated by electrical dc-currents of up to ±6 mA which are directed antiparallel through the nanowires. The geometry and the dimensions of the nanowires are systematically varied by choosing different wire widths w as well as separations b between the parallel wires for two different sets of samples. On the one hand, the wire width w is varied within 380 nm< w<2460 nm while the separation b≅450 nm between the wires is kept constant. On the other hand the separation b between the parallel wires is varied within 120 nm< b<5100 nm, while the wire width w=960 nm is kept constant. For all the geometrical configurations of parallel wires the resulting magnetic contrast is imaged by MFM at various tip lift-heights. By treating the MFM tip as a point probe, the analysis of the image contrast as a function of both the magnetic field strength and the tip lift height allows one to quantitatively determine the effective magnetic dipole and monopole moments of the tip as well as their imaginary locations within the real physical tip. Our systematic study quantitatively relates the above point-probe parameters to (i) the dimensions of the parallel wires and (ii) to the characteristic decay length of the z-component of the magnetic field of parallel wires. From this the effective tip-volume of the real thin film tip is determined which is relevant in MFM-imaging. Our results confirm the reliability of earlier tip calibration schemes for which nanofabricated current carrying rings were used instead of parallel

Enhancing the capabilities of eddy current techniques for non-destructive evaluation of austenitic stainless steels

International Nuclear Information System (INIS)

Rao, B.P.C.; Thirunavukkarasu, S.; Sasi, B.; Jayakumar, T.; Baldev Raj

2010-01-01

Eddy current non-destructive evaluation (NDE) techniques find many applications during fabrication and in-service inspection of components made of stainless steel. In recent years, concurrent developments in electromagnetic field detection sensors such as giant magneto-resistive (GMR), giant-magneto impedance (GMI) and SQUIDs sensors, computers, microelectronics, and incorporating advanced signal and image processing techniques, have paved the way for enhancing the capabilities of existing eddy current (EC) techniques for examination of austenitic stainless steel (SS) plates, tubes and other geometries and several innovative methodologies have been developed. This paper highlights a few such applications in EC testing to austenitic stainless steel components used in fast reactors. (author)

Generation of zonal magnetic fields by drift waves in a current carrying nonuniform magnetoplasma

International Nuclear Information System (INIS)

Shukla, Nitin; Shukla, P.K.

2010-01-01

It is shown that zonal magnetic fields (ZMFs) can be nonlinearly excited by incoherent drift waves (DWs) in a current carrying nonuniform magnetoplasma. The dynamics of incoherent DWs in the presence of ZMFs is governed by a wave-kinetic equation. The governing equation for ZMFs in the presence of nonlinear advection force of the DWs is obtained from the parallel component of the electron momentum equation and the Faraday law. Standard techniques are used to derive a nonlinear dispersion relation, which depicts instability via which ZMFs are excited in plasmas. ZMFs may inhibit the turbulent cross-field particle and energy transport in a nonuniform magnetoplasma.

Supply capability creation process: Key milestone criteria and activities

Energy Technology Data Exchange (ETDEWEB)

Verrollot, J.; Tolonen, A.; Harkonen, J.; Haapasalo, H.

2017-07-01

The article focuses on supply capability creation (SCC) within the new product development (NPD). The purpose is to establish an SCC process describing the main SCC activities and milestone criteria in preparing the supply process for new products Design/methodology/approach: The article analyses the earlier research, carries out current state analysis of six case companies regarding the SCC areas, and proposes a SCC process. Findings: The developed SCC process aims at preparing the operational supply capability for a developed new product based on the preferred, qualified and contracted suppliers and materials along the NPD process, and ultimately at the product ramp-up. Originality/value: This paper introduces a SCC process that has not been presented earlier in the literature, highlighting the important role of the SCC for successful product ramp-ups.

Levitation of current carrying states in the lattice model for the integer quantum Hall effect.

Science.gov (United States)

Koschny, T; Potempa, H; Schweitzer, L

2001-04-23

The disorder driven quantum Hall to insulator transition is investigated for a two-dimensional lattice model. The Hall conductivity and the localization length are calculated numerically near the transition. For uncorrelated and weakly correlated disorder potentials the current carrying states are annihilated by the negative Chern states originating from the band center. In the presence of correlated disorder potentials with correlation length larger than approximately half the lattice constant the floating up of the critical states in energy without merging is observed. This behavior is similar to the levitation scenario proposed for the continuum model.

THE IDEA IS TO USEMODIS IN CONJUNCTION WITH THE CURRENT LIMITED LANDSAT CAPABILITY, COMMERCIAL SATELLITES, ANDUNMANNED AERIAL VEHICLES (UAV), IN A MULTI-STAGE APPROACH TO MEET EPA INFORMATION NEEDS.REMOTE SENSING OVERVIEW: EPA CAPABILITIES, PRIORITY AGENCY APPLICATIONS, SENSOR/AIRCRAFT CAPABILITIES, COST CONSIDERATIONS, SPECTRAL AND SPATIAL RESOLUTIONS, AND TEMPORAL CONSIDERATIONS

Science.gov (United States)

EPA remote sensing capabilities include applied research for priority applications and technology support for operational assistance to clients across the Agency. The idea is to use MODIS in conjunction with the current limited Landsat capability, commercial satellites, and Unma...

Fault Ride Through Capability Enhancement of a Large-Scale PMSG Wind System with Bridge Type Fault Current Limiters

Directory of Open Access Journals (Sweden)

ALAM, M. S.

2018-02-01

Full Text Available In this paper, bridge type fault current limiter (BFCL is proposed as a potential solution to the fault problems of permanent magnet synchronous generator (PMSG based large-scale wind energy system. As PMSG wind system is more vulnerable to disturbances, it is essential to guarantee the stability during severe disturbances by enhancing the fault ride through capability. BFCL controller has been designed to insert resistance and inductance during the inception of system disturbances in order to limit fault current. Constant capacitor voltage has been maintained by the grid voltage source converter (GVSC controller while current extraction or injection has been achieved by machine VSC (MVSC controller. Symmetrical and unsymmetrical faults have been applied in the system to show the effectiveness of the proposed BFCL solution. PMSG wind system, BFCL and their controllers have been implemented by real time hardware in loop (RTHIL setup with real time digital simulator (RTDS and dSPACE. Another significant feature of this work is that the performance of the proposed BFCL is compared with that of series dynamic braking resistor (SDBR. Comparative RTHIL implementation results show that the proposed BFCL is very efficient in improving system fault ride through capability by limiting the fault current and outperforms SDBR.

The Orphee reactor current status and proposed enhancement of experimental capabilities

International Nuclear Information System (INIS)

Breant, P.

1990-01-01

This report provides a description of the Orphee reactor, together with a rapid assessment of its experimental and research capabilities. The plans for enhancing the reactor's experimental capabilities are also presented. (author)

Supply capability creation process: Key milestone criteria and activities

Directory of Open Access Journals (Sweden)

Jordan Verrollot

2017-09-01

Full Text Available Purpose: The article focuses on supply capability creation (SCC within the new product development (NPD. The purpose is to establish an SCC process describing the main SCC activities and milestone criteria in preparing the supply process for new products Design/methodology/approach: The article analyses the earlier research, carries out current state analysis of six case companies regarding the SCC areas, and proposes a SCC process. Findings: The developed SCC process aims at preparing the operational supply capability for a developed new product based on the preferred, qualified and contracted suppliers and materials along the NPD process, and ultimately at the product ramp-up. Originality/value: This paper introduces a SCC process that has not been presented earlier in the literature, highlighting the important role of the SCC for successful product ramp-ups.

Langmuir probe characteristic in a current - carrying magnetized plasma

International Nuclear Information System (INIS)

Stanojevic, M.; Cercek, M.; Gyergyek, T.

1995-01-01

Experimental investigation of the Langmuir probe characteristic is a magnetized plasma with an electron current along the magnetic field direction shows that the standard procedure for determination of the electron temperature and plasma density, which is applicable in a current - free magnetized plasma, gives erroneous results for these plasma parameters. However, more precise values of the plasma parameters can be calculated from the ion saturation currents and electron temperatures obtained with that procedure for two opposite orientations of the one - sided planar probe collecting surface with respect to the direction of the electron drift. With the existing theoretical models only the order of magnitude of the electron drift velocity can be accurately determined from the measured electron saturation currents for the two probe orientations. (author)

Review of current drive theory: selected topics

International Nuclear Information System (INIS)

Fisch, N.J.

1993-01-01

Two themes in current drive theory in tokamaks are reviewed, both relevant to the progression of tokamak experiments toward the reactor regime. First, the physics of the tail electrons is reviewed. These electrons are capable of carrying enormous rf-driven electric current, and, in the course of current-drive experiments worldwide not only has the current drive effect been demonstrated, but the underlying physical description of these tail electrons has been established. Second, anticipating the presence of the energetic alpha particles that result from D-T reactions in a reactor, certain mechanisms through which these alpha particles can be used to facilitate current-drive are reviewed. (Author)

14 CFR 121.570 - Airplane evacuation capability.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Airplane evacuation capability. 121.570... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Flight Operations § 121.570 Airplane evacuation capability. (a) No person may cause an airplane carrying passengers to be moved on the surface, take off, or...

Space Logistics: Launch Capabilities

Science.gov (United States)

Furnas, Randall B.

1989-01-01

The current maximum launch capability for the United States are shown. The predicted Earth-to-orbit requirements for the United States are presented. Contrasting the two indicates the strong National need for a major increase in Earth-to-orbit lift capability. Approximate weights for planned payloads are shown. NASA is studying the following options to meet the need for a new heavy-lift capability by mid to late 1990's: (1) Shuttle-C for near term (include growth versions); and (2) the Advanced Lauching System (ALS) for the long term. The current baseline two-engine Shuttle-C has a 15 x 82 ft payload bay and an expected lift capability of 82,000 lb to Low Earth Orbit. Several options are being considered which have expanded diameter payload bays. A three-engine Shuttle-C with an expected lift of 145,000 lb to LEO is being evaluated as well. The Advanced Launch System (ALS) is a potential joint development between the Air Force and NASA. This program is focused toward long-term launch requirements, specifically beyond the year 2000. The basic approach is to develop a family of vehicles with the same high reliability as the Shuttle system, yet offering a much greater lift capability at a greatly reduced cost (per pound of payload). The ALS unmanned family of vehicles will provide a low end lift capability equivalent to Titan IV, and a high end lift capability greater than the Soviet Energia if requirements for such a high-end vehicle are defined.In conclusion, the planning of the next generation space telescope should not be constrained to the current launch vehicles. New vehicle designs will be driven by the needs of anticipated heavy users.

Human Exploration Systems and Mobility Capability Roadmap Progress Review

Science.gov (United States)

Culbert, Chris; Taylor, Jeff

2005-01-01

Contents include the following: Capability Roadmap Team. Capability Description and Capability Breakdown Structure. Benefits of the Human Systems and Mobility Capability. Roadmap Process and Approach. Drivers and Assumptions for the whole team. Current State-of-the-Art, Assumptions and Requirements will be covered in the appropriate sections. Capability Presentations by Leads under Roadmap (Repeated for each capability under roadmap). Capability Description, Benefits, Current State-of-the-Art. Capability Requirements and Assumptions. Roadmap for Capability. Capability Readiness Level. Technology Readiness Level. Figures of Merit. Summary of Top Level Capability. Significant Technical Challenges. Summary and Forward Work.

Transformer-based asymmetrical embedded Z-source neutral point clamped inverters with continuous input current and enhanced voltage boost capability

DEFF Research Database (Denmark)

Mo, W.; Loh, Poh Chiang; Blaabjerg, Frede

2013-01-01

Z-source Neutral Point Clamped (NPC) inverters were introduced to integrate both the advantages of Z-source inverters and NPC inverters. However, traditional Z-source inverters suffer from high voltage stress and chopping input current. This paper proposes six types transformer-based impedance-so......-source NPC inverters which have enhanced voltage boost capability and continuous input current by utilizing of transformer and embedded dc source configuration. Experimental results are presented to verify the theory validation....

The electric field of a current-carrying conductor

International Nuclear Information System (INIS)

Strel'tsov, V.N.

1991-01-01

A subject concerning the relativistic invariance of the Gauss theorem has been discussed. The appearance of the electric field around the neutral conductor after excitation of current in it doesn't signify the change of its charge. 8 refs.; 1 fig

A.C. losses in current-carrying superconductors

International Nuclear Information System (INIS)

Reuver, J.L. de.

1985-01-01

The feasibility of superconductors for alternating current use depends on successful reduction of losses. Moreover, the demand for large field amplitudes is a stimulation for investigating the nature of a.c. losses (e.g. in the set of poloidal coils in a TOKAMAK). In this thesis, measurements are performed at a.c. superconductivity. Attention is given to various external field conditions as well as to self-field instability. Measurements are performed on different types of wires. A type of wire is searched for with both low losses and a good stabilization under self-field conditions. (G.J.P.)

Environmental sustainability control by water resources carrying capacity concept: application significance in Indonesia

Science.gov (United States)

Djuwansyah, M. R.

2018-02-01

This paper reviews the use of Water Resources carrying capacity concept to control environmental sustainability with the particular note for the case in Indonesia. Carrying capacity is a capability measure of an environment or an area to support human and the other lives as well as their activities in a sustainable manner. Recurrently water-related hazards and environmental problems indicate that the environments are exploited over its carrying capacity. Environmental carrying capacity (ECC) assessment includes Land and Water Carrying Capacity analysis of an area, suggested to always refer to the dimension of the related watershed as an incorporated hydrologic unit on the basis of resources availability estimation. Many countries use this measure to forecast the future sustainability of regional development based on water availability. Direct water Resource Carrying Capacity (WRCC) assessment involves population number determination together with their activities could be supported by available water, whereas indirect WRCC assessment comprises the analysis of supply-demand balance status of water. Water resource limits primarily environmental carrying capacity rather than the land resource since land capability constraints are easier. WRCC is a crucial factor known to control land and water resource utilization, particularly in a growing densely populated area. Even though capability of water resources is relatively perpetual, the utilization pattern of these resources may change by socio-economic and cultural technology level of the users, because of which WRCC should be evaluated periodically to maintain usage sustainability of water resource and environment.

Technical Study on Improvement of Endurance Capability of Limit Short-circuit Current of Charge Control SMART Meter

Science.gov (United States)

Li, W. W.; Du, Z. Z.; Yuan, R. m.; Xiong, D. Z.; Shi, E. W.; Lu, G. N.; Dai, Z. Y.; Chen, X. Q.; Jiang, Z. Y.; Lv, Y. G.

2017-10-01

Smart meter represents the development direction of energy-saving smart grid in the future. The load switch, one of the core parts of smart meter, should be of high reliability, safety and endurance capability of limit short-circuit current. For this reason, this paper discusses the quick simulation of relationship between attraction and counterforce of load switch without iteration, establishes dual response surface model of attraction and counterforce and optimizes the design scheme of load switch for charge control smart meter, thus increasing electromagnetic attraction and spring counterforce. In this way, this paper puts forward a method to improve the withstand capacity of limit short-circuit current.

Local Dynamic Stability Associated with Load Carrying

Directory of Open Access Journals (Sweden)

Jian Liu

2013-03-01

Conclusion: Current study confirmed the sensitivity of local dynamic stability measure in load carrying situation. It was concluded that load carrying tasks were associated with declined local dynamic stability, which may result in increased risk of fall accident. This finding has implications in preventing fall accidents associated with occupational load carrying.

Current-carrying capacity dependence of composite Bi2Sr2CaCu2O8 superconductors on the liquid coolant conditions

International Nuclear Information System (INIS)

Romanovskii, V R; Watanabe, K; Awaji, S; Nishijima, G

2006-01-01

The thermal runaway conditions of the composite Bi 2 Sr 2 CaCu 2 O 8 superconductor cooled by liquid helium or liquid hydrogen are compared. The study based on the static analysis of thermoelectric modes was made when the volume fraction of the superconductor in a composite was varied. Some specific trends underlying the onset of thermal runaway in superconducting composites cooled by liquid coolants are discussed. It is stated that the operating modes of superconducting composites may be characterized by stable states during which the current-carrying capacity of a superconductor is not effectively used even with a high amount of superconductor in the composite. These states are possible due to the corresponding temperature variation of the resistivities of the matrix and the superconductor in the high operating temperature range. They have to be considered in experiments when the critical current of a superconductor is determined or when the optimal stable operating modes of the current-carrying elements based on the Bi 2 Sr 2 CaCu 2 O 8 superconductor, which is cooled by liquid coolant, are defined

ADVANCED SIMULATION CAPABILITY FOR ENVIRONMENTAL MANAGEMENT- CURRENT STATUS AND PHASE II DEMONSTRATION RESULTS

Energy Technology Data Exchange (ETDEWEB)

Seitz, R.

2013-02-26

The U.S. Department of Energy (USDOE) Office of Environmental Management (EM), Office of Soil and Groundwater, is supporting development of the Advanced Simulation Capability for Environmental Management (ASCEM). ASCEM is a state-of-the-art scientific tool and approach for understanding and predicting contaminant fate and transport in natural and engineered systems. The modular and open source high-performance computing tool facilitates integrated approaches to modeling and site characterization that enable robust and standardized assessments of performance and risk for EM cleanup and closure activities. The ASCEM project continues to make significant progress in development of computer software capabilities with an emphasis on integration of capabilities in FY12. Capability development is occurring for both the Platform and Integrated Toolsets and High-Performance Computing (HPC) Multiprocess Simulator. The Platform capabilities provide the user interface and tools for end-to-end model development, starting with definition of the conceptual model, management of data for model input, model calibration and uncertainty analysis, and processing of model output, including visualization. The HPC capabilities target increased functionality of process model representations, toolsets for interaction with Platform, and verification and model confidence testing. The Platform and HPC capabilities are being tested and evaluated for EM applications in a set of demonstrations as part of Site Applications Thrust Area activities. The Phase I demonstration focusing on individual capabilities of the initial toolsets was completed in 2010. The Phase II demonstration completed in 2012 focused on showcasing integrated ASCEM capabilities. For Phase II, the Hanford Site deep vadose zone (BC Cribs) served as an application site for an end-to-end demonstration of capabilities, with emphasis on integration and linkages between the Platform and HPC components. Other demonstrations

Suppression of vertical instability in elongated current-carrying plasmas by applying stellarator rotational transform

International Nuclear Information System (INIS)

ArchMiller, M. C.; Cianciosa, M. R.; Ennis, D. A.; Hanson, J. D.; Hartwell, G. J.; Hebert, J. D.; Herfindal, J. L.; Knowlton, S. F.; Ma, X.; Maurer, D. A.; Pandya, M. D.; Traverso, P.

2014-01-01

The passive stability of vertically elongated current-carrying toroidal plasmas has been investigated in the Compact Toroidal Hybrid, a stellarator/tokamak hybrid device. In this experiment, the fractional transform f, defined as the ratio of the imposed external rotational transform from stellarator coils to the total rotational transform, was varied from 0.04 to 0.50, and the elongation κ was varied from 1.4 to 2.2. Plasmas that were vertically unstable were evidenced by motion of the plasma in the vertical direction. Vertical drifts are measured with a set of poloidal field pickup coils. A three chord horizontally viewing interferometer and a soft X-ray diode array confirmed the drifts. Plasmas with low fractional transform and high elongation are the most susceptible to vertical instability, consistent with analytic predictions that the vertical mode in elongated plasmas can be stabilized by the poloidal field of a relatively weak stellarator equilibrium

Quantifying the Global Fresh Water Budget: Capabilities from Current and Future Satellite Sensors

Science.gov (United States)

Hildebrand, Peter; Zaitchik, Benjamin

2007-01-01

The global water cycle is complex and its components are difficult to measure, particularly at the global scales and with the precision needed for assessing climate impacts. Recent advances in satellite observational capabilities, however, are greatly improving our knowledge of the key terms in the fresh water flux budget. Many components of the of the global water budget, e.g. precipitation, atmospheric moisture profiles, soil moisture, snow cover, sea ice are now routinely measured globally using instruments on satellites such as TRMM, AQUA, TERRA, GRACE, and ICESat, as well as on operational satellites. New techniques, many using data assimilation approaches, are providing pathways toward measuring snow water equivalent, evapotranspiration, ground water, ice mass, as well as improving the measurement quality for other components of the global water budget. This paper evaluates these current and developing satellite capabilities to observe the global fresh water budget, then looks forward to evaluate the potential for improvements that may result from future space missions as detailed by the US Decadal Survey, and operational plans. Based on these analyses, and on the goal of improved knowledge of the global fresh water budget under the effects of climate change, we suggest some priorities for the future, based on new approaches that may provide the improved measurements and the analyses needed to understand and observe the potential speed-up of the global water cycle under the effects of climate change.

Strengthening Nordic-Baltic Defense Capabilities

DEFF Research Database (Denmark)

Breitenbauch, Henrik Ø.

2014-01-01

and troubling challenge to the way international security has been structured in Europe since the end of the Cold War. While most of the existing defense cooperation with a view of strengthening defense capabilities has been carried out within the internationally renowned framework of NORDEFCO...

High impact of uranyl ions on carrying-releasing oxygen capability of hemoglobin-based blood substitutes

Energy Technology Data Exchange (ETDEWEB)

Duan, Li; Du, Lili; Liu, Wenyuan; Liu, Zhichao [Northwest Institute of Nuclear Technology, Xi' an, Shaanxi (China); Jia, Yi; Li, Junbai [Beijing National Laboratory for Molecular Sciences, CAS Key Laboratory of Colloid Interface and Chemical Thermodynamics, Institute of Chemistry, Chinese Academy of Sciences, Beijing (China)

2015-01-07

The effect of radioactive UO{sub 2}{sup 2+} on the oxygen-transporting capability of hemoglobin-based oxygen carriers has been investigated in vitro. The hemoglobin (Hb) microspheres fabricated by the porous template covalent layer-by-layer (LbL) assembly were utilized as artificial oxygen carriers and blood substitutes. Magnetic nanoparticles of iron oxide (Fe{sub 3}O{sub 4}) were loaded in porous CaCO{sub 3} particles for magnetically assisted chemical separation (MACS). Through the adsorption spectrum of magnetic Hb microspheres after adsorbing UO{sub 2}{sup 2+}, it was found that UO{sub 2}{sup 2+} was highly loaded in the magnetic Hb microspheres, and it shows that the presence of UO{sub 2}{sup 2+} in vivo destroys the structure and oxygen-transporting capability of Hb microspheres. In view of the high adsorption capacity of UO{sub 2}{sup 2+}, the as-assembled magnetic Hb microspheres can be considered as a novel, highly effective adsorbent for removing metal toxins from radiation-contaminated bodies, or from nuclear-power reactor effluent before discharge into the environment. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Deformation of the free surface of a conducting fluid in the magnetic field of current-carrying linear conductors

International Nuclear Information System (INIS)

Zubarev, N.M.; Zubareva, O.V.

2017-01-01

The magnetic shaping problem is studied for the situation where a cylindrical column of a perfectly conducting fluid is deformed by the magnetic field of a system of linear current-carrying conductors. Equilibrium is achieved due to the balance of capillary and magnetic pressures. Two two-parametric families of exact solutions of the problem are obtained with the help of conformal mapping technique. In accordance with them, the column essentially deforms in the cross section up to its disintegration.

Deformation of the free surface of a conducting fluid in the magnetic field of current-carrying linear conductors

Science.gov (United States)

Zubarev, N. M.; Zubareva, O. V.

2017-06-01

The magnetic shaping problem is studied for the situation where a cylindrical column of a perfectly conducting fluid is deformed by the magnetic field of a system of linear current-carrying conductors. Equilibrium is achieved due to the balance of capillary and magnetic pressures. Two two-parametric families of exact solutions of the problem are obtained with the help of conformal mapping technique. In accordance with them, the column essentially deforms in the cross section up to its disintegration.

Transformer current sensor for superconducting magnetic coils

Science.gov (United States)

Shen, S.S.; Wilson, C.T.

1985-04-16

The present invention is a current transformer for operating currents larger than 2kA (two kiloamps) that is capable of detecting a millivolt level resistive voltage in the presence of a large inductive voltage. Specifically, the present invention includes substantially cylindrical primary turns arranged to carry a primary current and substantially cylindrical secondary turns arranged coaxially with and only partially within the primary turns, the secondary turns including an active winding and a dummy winding, the active and dummy windings being coaxial, longitudinally separated and arranged to mutually cancel voltages excited by commonly experienced magnetic fields, the active winding but not the dummy winding being arranged within the primary turns.

Thermal domains in inhomogeneous current-carrying superconductors. Current-voltage characteriscs and dynamics of domain formation after current jumps

International Nuclear Information System (INIS)

Bezuglyj, A.I.; Shklovskij, V.A.

1984-01-01

The static and dynamic behavior of thermal domains in inhomogeneous superconducting films, where the inhomogeneity behaves like a portion of the film with a reduced critical current, have been studied theoretically within the framework of the phenomenological approach, using the heat balance equation and the dependence of the superconductor critical current on temperature. Depending on the size of the inhomogeneity (local or extended) and on the relative values of parameters of the homogeneous and inhomogeneous regions, different types of current-voltage characteristics are obtained. The nonstationary problem of thermal domain formation near the inhomogeneity after a current jump has been solved, and the domain boundary (kink) dynamics at a distance from the inhomogeneity has been analyzed. A combination of the results allows one to describe the whole process of normal phase formation and its spread throughout the superconducting film

Photosynthetic and nitrogen fixation capability in several soybean mutant lines

International Nuclear Information System (INIS)

Gandanegara, S.; Hendratno, K.

1987-01-01

Photosynthetic and nitrogen fixation capability in several soybean mutant lines. A greenhouse experiment has been carried out to study photosynthetic and nitrogen fixation capability of five mutant lines and two soybean varieties. An amount of 330 uCi of 14 CO 2 was fed to the plants including of the non-fixing reference crop (Chippewa non-nodulating isoline). Nitrogen fixation measurements was carried out using 15 N isotope dilution technique according to A-value concept. Results showed that beside variety/mutant lines, plant growth also has important role in photosynthetic and N fixing capability. Better growth and a higher photosynthetic capability in Orba, mutant lines nos. 63 and 65 resulted in a greater amount of N 2 fixed (mg N/plant) than other mutant lines. (author). 12 refs.; 5 figs

Current carrying properties of double layers and low frequency auroral fluctuations

International Nuclear Information System (INIS)

Singh, N.; Schunk, R.W.

1982-01-01

Numerical simulations showed recurring interruption and recovery of electron and ion currents through double layers. The time period tau of the recurring phenomena is governed by the ion dynamics; for ions with a drift V/sub i/ entering the simulation plasma such that V/sub i/ V/sub ti/ ion-acoustic modes also appear in the electron- and ion-current fluctuations. The electron current fluctuations are governed by the ion current through the Langmuir criterion. It is suggested that some low frequency auroral fluctuations could possibly be explained by current fluctuations through double layers

Technological Capability's Predictor Variables

Directory of Open Access Journals (Sweden)

Fernanda Maciel Reichert

2011-03-01

Full Text Available The aim of this study was to identify the factors that influence in configuration of the technological capability of companies in sectors with medium-low technological intensity. To achieve the goal proposed in this article a survey was carried out. Based on the framework developed by Lall (1992 which classifies firms in basic, intermediate and advanced level of technological capability; it was found that the predominant technological capability is intermediate, with 83.7% of respondent companies (plastics companies in Brazil. It is believed that the main contribution of this study is the finding that the dependent variable named “Technological Capability” can be explained at a rate of 65% by six variables: development of new processes; selection of the best equipment supplier; sales of internally developed new technology to third parties; design and manufacture of equipment; study of the work methods and perform inventory control; and improvement of product quality.

DDP-516 Computer Graphics System Capabilities

Science.gov (United States)

1972-06-01

This report describes the capabilities of the DDP-516 Computer Graphics System. One objective of this report is to acquaint DOT management and project planners with the system's current capabilities, applications hardware and software. The Appendix i...

ROV: improving remotely operated vehicle (ROV) intervention capabilities for blowout preventer override systems

Energy Technology Data Exchange (ETDEWEB)

Lazar, Stephen [Christopher S. Mancini, Tomball, TX (United States)

2012-07-01

Events during 2010 have focused attention on increased ROV/BOP Intervention capabilities and standardization of BOP/ROV interfaces in the oil and gas offshore industry. Currently no enforced set standards for ROV intervention panels or manifold types for use on BOP Override systems are specified. The industry offers multiple configurations at present. This abstract will discuss the advantages and disadvantages of the various configurations in existence, trending toward suggested industry standards taking shape as requirements in the near term. Standards for the offshore industry or a set specification must be made to increase safety and functionality of BOP control systems. To date, ROV override capabilities have been added to existing engineered BOP systems. BOP designed closing times were not a critical consideration, only that the access was there to allow for ROV override. Increased ROV flow and pressure capabilities: no current minimum flow requirements for Emergency BOP Override pumps are established. Based on stack valving and configuration, a minimum, 7 gpm may be required to shift valving fully to allow BOP operator function. IADC/API minimum requirements may be proposed at 10 gpm at 3000psi. Based on shear pressures exceeding 3000psi, pressures of 5000psi should be considered. Current intervention skids/pump capabilities will be required if ROVs must achieve API 16D BOP minimum closing times. Remote or isolated accumulation for increased intervention capabilities offers possibilities when ANY ROV of opportunity can trigger a function (such as small inspection type ROVs). Increased volumes will be required. This is critical in functioning stack rams with an ROV of opportunity to achieve API 16D closing times. We now understand that higher flows and pressures are required along with standardization of stab types. Current recommendations: API 17H Hi-Flow manifolds should be added to essential ROV overrides. ROV skids will have a minimum requirement of 10gpm

Review of current capabilities for the measurement of stress, displacement, and in situ deformation modulus

International Nuclear Information System (INIS)

Schrauf, T.W.; Pratt, H.R.

1979-12-01

Current capabilities for the measurement of stress, displacement, and in situ deformation modulus in rock masses are reviewed as to their accuracy, sensitivity, advantages, and limitations. Consideration is given to both the instruments themselves and the measurement technique. Recommendations concerning adaptation of existing measurement techniques to repository monitoring are also discussed. These recommendations include: (1) development of a modified borehole deformation gage with improved long-term stability and reliability and reduced thermal sensitivity; (2) development of a downhole transducer type of extensometer; (3) development of a rigid inclusion type gage; (4) development of an improved vibrating wire stressmeter with greater accuracy and simplified calibration and installation requirements; and (5) modification of standard rod extensometers to improve their sensitivity

Advanced Simulation Capability for Environmental Management - Current Status and Phase II Demonstration Results - 13161

Energy Technology Data Exchange (ETDEWEB)

Seitz, Roger R.; Flach, Greg [Savannah River National Laboratory, Savannah River Site, Bldg 773-43A, Aiken, SC 29808 (United States); Freshley, Mark D.; Freedman, Vicky; Gorton, Ian [Pacific Northwest National Laboratory, MSIN K9-33, P.O. Box 999, Richland, WA 99352 (United States); Dixon, Paul; Moulton, J. David [Los Alamos National Laboratory, MS B284, P.O. Box 1663, Los Alamos, NM 87544 (United States); Hubbard, Susan S.; Faybishenko, Boris; Steefel, Carl I.; Finsterle, Stefan [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, MS 50B-4230, Berkeley, CA 94720 (United States); Marble, Justin [Department of Energy, 19901 Germantown Road, Germantown, MD 20874-1290 (United States)

2013-07-01

The U.S. Department of Energy (US DOE) Office of Environmental Management (EM), Office of Soil and Groundwater, is supporting development of the Advanced Simulation Capability for Environmental Management (ASCEM). ASCEM is a state-of-the-art scientific tool and approach for understanding and predicting contaminant fate and transport in natural and engineered systems. The modular and open source high-performance computing tool facilitates integrated approaches to modeling and site characterization that enable robust and standardized assessments of performance and risk for EM cleanup and closure activities. The ASCEM project continues to make significant progress in development of computer software capabilities with an emphasis on integration of capabilities in FY12. Capability development is occurring for both the Platform and Integrated Tool-sets and High-Performance Computing (HPC) Multi-process Simulator. The Platform capabilities provide the user interface and tools for end-to-end model development, starting with definition of the conceptual model, management of data for model input, model calibration and uncertainty analysis, and processing of model output, including visualization. The HPC capabilities target increased functionality of process model representations, tool-sets for interaction with Platform, and verification and model confidence testing. The Platform and HPC capabilities are being tested and evaluated for EM applications in a set of demonstrations as part of Site Applications Thrust Area activities. The Phase I demonstration focusing on individual capabilities of the initial tool-sets was completed in 2010. The Phase II demonstration completed in 2012 focused on showcasing integrated ASCEM capabilities. For Phase II, the Hanford Site deep vadose zone (BC Cribs) served as an application site for an end-to-end demonstration of capabilities, with emphasis on integration and linkages between the Platform and HPC components. Other demonstrations

Advanced Simulation Capability for Environmental Management - Current Status and Phase II Demonstration Results - 13161

International Nuclear Information System (INIS)

Seitz, Roger R.; Flach, Greg; Freshley, Mark D.; Freedman, Vicky; Gorton, Ian; Dixon, Paul; Moulton, J. David; Hubbard, Susan S.; Faybishenko, Boris; Steefel, Carl I.; Finsterle, Stefan; Marble, Justin

2013-01-01

The U.S. Department of Energy (US DOE) Office of Environmental Management (EM), Office of Soil and Groundwater, is supporting development of the Advanced Simulation Capability for Environmental Management (ASCEM). ASCEM is a state-of-the-art scientific tool and approach for understanding and predicting contaminant fate and transport in natural and engineered systems. The modular and open source high-performance computing tool facilitates integrated approaches to modeling and site characterization that enable robust and standardized assessments of performance and risk for EM cleanup and closure activities. The ASCEM project continues to make significant progress in development of computer software capabilities with an emphasis on integration of capabilities in FY12. Capability development is occurring for both the Platform and Integrated Tool-sets and High-Performance Computing (HPC) Multi-process Simulator. The Platform capabilities provide the user interface and tools for end-to-end model development, starting with definition of the conceptual model, management of data for model input, model calibration and uncertainty analysis, and processing of model output, including visualization. The HPC capabilities target increased functionality of process model representations, tool-sets for interaction with Platform, and verification and model confidence testing. The Platform and HPC capabilities are being tested and evaluated for EM applications in a set of demonstrations as part of Site Applications Thrust Area activities. The Phase I demonstration focusing on individual capabilities of the initial tool-sets was completed in 2010. The Phase II demonstration completed in 2012 focused on showcasing integrated ASCEM capabilities. For Phase II, the Hanford Site deep vadose zone (BC Cribs) served as an application site for an end-to-end demonstration of capabilities, with emphasis on integration and linkages between the Platform and HPC components. Other demonstrations

Overview of current RFSP-code capabilities for CANDU core analysis

International Nuclear Information System (INIS)

Rouben, B.

1996-01-01

RFSP (Reactor Fuelling Simulation Program) is the major finite-reactor computer code in use at the Atomic Energy of Canada Limited for the design and analysis of CANDU reactor cores. An overview is given of the major computational capabilities available in RFSP. (author) 11 refs., 29 figs

Carrying capacity: the tradition and policy implications of limits

Directory of Open Access Journals (Sweden)

Virginia Deane Abernethy

2001-01-01

Full Text Available ABSTRACT: Within just the last few centuries, science and technology have enlarged human capabilities and population size until humans now take, for their own use, nearly half of the Earth's net terrestrial primary production. An ethical perspective suggests that potentials to alter, or further increase, humanity's use of global resources should be scrutinized through the lenses of self-interested foresightedness and respect for non-human life. Without overtly invoking ethics, studies of the carrying capacity achieve just this objective. Carrying capacity is an ecological concept that expresses the relationship between a population and the natural environment on which it depends for ongoing sustenance. Carrying capacity assumes limits on the number of individuals that can be supported at a given level of consumption without degrading the environment and, therefore, reducing future carrying capacity. That is, carrying capacity addresses long-term sustainability. Worldviews differ in the importance accorded to the carrying capacity concept. This paper addresses three worldviews - ecological, romantic, and entrepreneurial - and explores the ethics and the policy implications of their contrasting perspectives.

BLOOD SUBSTITUTES: EVOLUTION FROM NON-CARRYING TO OXYGEN AND GAS CARRYING FLUIDS

Science.gov (United States)

Cabrales, Pedro; Intaglietta, Marcos

2013-01-01

The development of oxygen (O2) carrying blood substitutes has evolved from the goal of replicating blood O2 transports properties to that of preserving microvascular and organ function, reducing the inherent or potential toxicity of the material used to carry O2, and treating pathologies initiated by anemia and hypoxia. Furthermore, the emphasis has shifted from blood replacement fluid to “O2 therapeutics” that restore tissue oxygenation to specific tissues regions. This review covers the different alternatives, potential and limitations of hemoglobin based O2 carriers (HBOCs) and perfluorocarbon based O2 carriers (PFCOCs), with emphasis on the physiological conditions disturbed in the situation that they will be used. It describes how concepts learned from plasma expanders without O2 carrying capacity can be applied to maintain O2 delivery and summarizes the microvascular responses due to HBOCs and PFCOCs. This review also presents alternative applications of HBOCs and PFCOCs namely: 1) How HBOC O2 affinity can be engineered to target O2 delivery to hypoxic tissues; and 2) How the high gas solubility of PFCOCs provides new opportunities for carrying, dissolving and delivering gases with biological activity. It is concluded that current blood substitutes development has amplified their applications horizon by devising therapeutic functions for oxygen carriers requiring limited O2 delivery capacity restoration. Conversely, full, blood-like O2 carrying capacity re-establishment awaits control of O2 carrier toxicity. PMID:23820271

Networking capability and new product development

NARCIS (Netherlands)

Mu, J.; Di Benedetto, A.C.

2012-01-01

Current research on network theory remains largely focused on structures and outcomes without exploring the capability that firms need to build efficient and effective networks to their advantage. In this paper, we take a networking capability view in studying inter-firm relationships. We assume

Change, technology and higher education: are universities capable of organisational change?

Directory of Open Access Journals (Sweden)

Stephen Marshall

2010-12-01

Full Text Available Technology and change are so closely related that the use of the word innovation seems synonymous with technology in many contexts, including that of higher education. This paper contends that university culture and existing capability constrain such innovation and to a large extent determine the nature and extent of organisational change. In the absence of strong leadership, technologies are simply used as vehicles to enable changes that are already intended or which reinforce the current identity. These contentions are supported by evidence from e-learning benchmarking activities carried out over the past five years in universities in the United States, the United Kingdom, Australia and New Zealand.

Resource-Based Capability on Development Knowledge Management Capabilities of Coastal Community

Science.gov (United States)

Teniwut, Roberto M. K.; Hasyim, Cawalinya L.; Teniwut, Wellem A.

2017-10-01

Building sustainable knowledge management capabilities in the coastal area might face a whole new challenge since there are many intangible factors involved from openness on new knowledge, access and ability to use the latest technology to the various local wisdom that still in place. The aimed of this study was to identify and analyze the resource-based condition of coastal community in this area to have an empirical condition of tangible and intangible infrastructure on developing knowledge management capability coastal community in Southeast Maluku, Indonesia. We used qualitative and quantitative analysis by depth interview and questionnaire for collecting the data with multiple linear regression as our analysis method. The result provided the information on current state of resource-based capability of a coastal community in this Southeast Maluku to build a sustainability model of knowledge management capabilities especially on utilization marine and fisheries resources. The implication of this study can provide an empirical information for government, NGO and research institution to dictate on how they conducted their policy and program on developing coastal community region.

Towards a dynamic concept of alliance capability

OpenAIRE

SLUYTS, Kim; MARTENS, Rudy; MATTHYSSENS, Paul

2008-01-01

This paper has a threefold purpose. First, we offer a literature review on alliance capability based on strategic and competence based management literature. Second, we extend existing literature on alliance capability by breaking this concept down into five sub capabilities, which are each linked to a stage of the alliance life cycle. Finally, we suggest how firms can support these capabilities through structural, technological and people-related tools and techniques. We argue that current l...

Analytical Chemistry Core Capability Assessment - Preliminary Report

International Nuclear Information System (INIS)

Barr, Mary E.; Farish, Thomas J.

2012-01-01

The concept of 'core capability' can be nebulous one. Even at a fairly specific level, where core capability equals maintaining essential services, it is highly dependent upon the perspective of the requestor. Samples are submitted to analytical services because the requesters do not have the capability to conduct adequate analyses themselves. Some requests are for general chemical information in support of R and D, process control, or process improvement. Many analyses, however, are part of a product certification package and must comply with higher-level customer quality assurance requirements. So which services are essential to that customer - just those for product certification? Does the customer also (indirectly) need services that support process control and improvement? And what is the timeframe? Capability is often expressed in terms of the currently utilized procedures, and most programmatic customers can only plan a few years out, at best. But should core capability consider the long term where new technologies, aging facilities, and personnel replacements must be considered? These questions, and a multitude of others, explain why attempts to gain long-term consensus on the definition of core capability have consistently failed. This preliminary report will not try to define core capability for any specific program or set of programs. Instead, it will try to address the underlying concerns that drive the desire to determine core capability. Essentially, programmatic customers want to be able to call upon analytical chemistry services to provide all the assays they need, and they don't want to pay for analytical chemistry services they don't currently use (or use infrequently). This report will focus on explaining how the current analytical capabilities and methods evolved to serve a variety of needs with a focus on why some analytes have multiple analytical techniques, and what determines the infrastructure for these analyses. This information will be

Liberalism, Humanism, and Feminism in Nussbaum's Capabilities ...

African Journals Online (AJOL)

A purely theoretical analysis of Martha Nussbaum's basis of the capabilities ... Since even a capabilities approach rooted in feminist justice is itself radical and must ... rhetoric of sex and social justice that has already been embraced by current

Grid sensitivity capability for large scale structures

Science.gov (United States)

Nagendra, Gopal K.; Wallerstein, David V.

1989-01-01

The considerations and the resultant approach used to implement design sensitivity capability for grids into a large scale, general purpose finite element system (MSC/NASTRAN) are presented. The design variables are grid perturbations with a rather general linking capability. Moreover, shape and sizing variables may be linked together. The design is general enough to facilitate geometric modeling techniques for generating design variable linking schemes in an easy and straightforward manner. Test cases have been run and validated by comparison with the overall finite difference method. The linking of a design sensitivity capability for shape variables in MSC/NASTRAN with an optimizer would give designers a powerful, automated tool to carry out practical optimization design of real life, complicated structures.

Carry

DEFF Research Database (Denmark)

Koijen, Ralph S.J.; Moskowitz, Tobias J.; Heje Pedersen, Lasse

that include global equities, global bonds, currencies, commodities, US Treasuries, credit, and equity index options. This predictability underlies the strong returns to "carry trades" that go long high-carry and short low-carry securities, applied almost exclusively to currencies, but shown here...

Fate of microplastics and mesoplastics carried by surface currents and wind waves: A numerical model approach in the Sea of Japan.

Science.gov (United States)

Iwasaki, Shinsuke; Isobe, Atsuhiko; Kako, Shin'ichiro; Uchida, Keiichi; Tokai, Tadashi

2017-08-15

A numerical model was established to reproduce the oceanic transport processes of microplastics and mesoplastics in the Sea of Japan. A particle tracking model, where surface ocean currents were given by a combination of a reanalysis ocean current product and Stokes drift computed separately by a wave model, simulated particle movement. The model results corresponded with the field survey. Modeled results indicated the micro- and mesoplastics are moved northeastward by the Tsushima Current. Subsequently, Stokes drift selectively moves mesoplastics during winter toward the Japanese coast, resulting in increased contributions of mesoplastics south of 39°N. Additionally, Stokes drift also transports micro- and mesoplastics out to the sea area south of the subpolar front where the northeastward Tsushima Current carries them into the open ocean via the Tsugaru and Soya straits. Average transit time of modeled particles in the Sea of Japan is drastically reduced when including Stokes drift in the model. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Stationary spectra in a quasi neutral current-carrying plasma

International Nuclear Information System (INIS)

Vakulenko, M.O.

1992-01-01

The low-frequency short-wave equilibrium spectra of electromagnetic fluctuations are obtained, accounting for cross-field correlations. The statistical analysis shows that a longitudinal current in a dense quasi neutral (α e ≡4πnomec 2 /Bo 2 >>1) plasma destroys the stationary of fluctuation spectra corresponding to zero fluxes of motion invariants, and may alter also the anomalous electron heat conductivity. 2 refs. (author)

Study on Application of New Approach of Fault Current Limiters in Fault Ride through Capability Improvement of DFIG Based Wind Turbine

DEFF Research Database (Denmark)

Naderi, Seyed Behzad; Davari, Pooya; Zhou, Dao

2018-01-01

Due to salient advantages, Doubly-Fed Induction Generator (DFIG) has more application in power network compared to Fixed Speed Wind Turbine. Because of employing back-to-back converters, one of the important studies regarding new grid code requirements is Fault Ride-Through (FRT) capability....... The proposed FCL can insert a controllable resistance in fault current pass to not only restrict fault current level and compensate voltage sag in the stator but also consume pre-fault output active power of the DFIG regarding wind speed variation. Simulation results and analytics are presented to prove...

Torque capability improvement of sensorless FOC induction machine in field weakening for propulsion purposes

Directory of Open Access Journals (Sweden)

Nisha G.K.

2017-05-01

Full Text Available An electric propulsion system is generally based on torque controlled electric drive and DC series motors are traditionally used for propulsion system. Induction machines, which are reliable, low cost and have less maintenance, satisfy the characteristics of the propulsion and reinstating the DC series motor. Field oriented control (FOC of induction machines can decouple its torque control from field control which allows the induction motor to act like a separately excited DC motor. In this paper, the characteristic control of induction motor is achieved through appropriate design modification of induction motor by varying magnetizing current to produce maximum torque in field weakening (FW region. Thus to improve the torque capability of induction machine in FW region by varying machine parameters. The sensorless operation of the induction motor is carried out by adopting model reference adaptive system (MRAS using sliding mode control (SMC and a FW algorithm based on the voltage and current constraints. The simulation of the induction motor drive models based on the design options have been carried out and analyzed the simulation results.

Liquid metal current collectors for high-speed rotating machinery

International Nuclear Information System (INIS)

Carr, S.L.

1976-01-01

Recent interest in superconducting motors and generators has created a renewed interest in homopolar machinery. Homopolar machine designs have always been limited by the need for compact, high-current, low-voltage, sliding electrical curent collectors. Conventional graphite-based solid brushes are inadequate for use in homopolar machines. Liquid metals, under certain conditions of relative sliding velocities, electrical currents, and magnetic fields are known to be capable of performing well in homopolar machines. An effort to explore the capabilities and limits of a tongue-and-groove style current collector, utilizing sodium-potassium eutectic alloy (NaK) as the working fluid in high sliding speed operation is reported here. A double current collector generator model with a 14.5-cm maximum rotor diameter, 20,000 rpm rotational capability, and electrical current carrying ability was constructed and operated successfully at a peripheral velocity of 125 m/s. The limiting factor in these experiments was a high-speed fluid-flow instability resulting in the ejection of the working fluid from the operating portions of the collectors. The effects of collector size and geometry, working fluid (NaK or water), and cover gas pressure are reported. Hydrodynamic frictional torque-speed curves are given for the two fluids and for several geometries. Electrical resistances as a function of peripheral velocity at 60 amperes are reported, and the phenomenology of the high-speed fluid-flow instabilities is discussed. The possibility of long-term high-speed operation of current collectors of the tongue-and-groove type, along with experimental and theoretical hydrodynamic friction losses at high peripheral velocities, is considered

The Pedersen current carried by electrons: a non-linear response of the ionosphere to magnetospheric forcing

Directory of Open Access Journals (Sweden)

S. C. Buchert

2008-09-01

Full Text Available Observations by the EISCAT Svalbard radar show that electron temperatures T_e in the cusp electrojet reach up to about 4000 K. The heat is tapped and converted from plasma convection in the near Earth space by a Pedersen current that is carried by electrons due to the presence of irregularities and their demagnetising effect. The heat is transfered to the neutral gas by collisions. In order to enhance T_e to such high temperatures the maximally possible dissipation at 50% demagnetisation must nearly be reached. The effective Pedersen conductances are found to be enhanced by up to 60% compared to classical values. Conductivities and conductances respond significantly to variations of the electric field strength E, and "Ohm's law" for the ionosphere becomes non-linear for large E.

Do social networks and technological capabilities help knowledge management?

Directory of Open Access Journals (Sweden)

Encarnación García-Sánchez

2017-12-01

Full Text Available Dynamic capabilities are currently becoming an important extension of the theory of resources and capabilities that enables companies to adapt better in the current competitive environment. This paper examines how knowledge management, a dynamic function related to management or administration of a set of knowledge flows, develops thanks to the greater dynamism of social networks. It then shows how this relationship is especially strengthened by different technological capabilities. To achieve these goals, the paper examines the main tools that permit companies to develop an ability to achieve competitive advantage relative to the technological capabilities of managers and workers, social networks and knowledge management.

Load-carrying capabilities of refractory alloys for space reactor power applications

International Nuclear Information System (INIS)

Horak, J.A.

1985-01-01

To achieve sufficient thermodynamic efficiency, space nuclear power systems must operate above 1000 0 C. A quantitative evaluation of the existing mechanical properties data for the refractory alloys relevant to space nuclear power systems design lifetimes up to seven years at temperatures up to 1400 0 C is being conducted. The most important properties for space nuclear power systems are long-term high-temperature (>1000 0 C) creep strength and ductility, low-temperature ( 0 C) fracture toughness [including ductile-to-brittle transition temperature, (DBTT)], and ductility at high strain rates; of special concern are the above properties for weldments of refractory alloys, composition, applied stress, test temperature, test environment (e.g., vacuum, lithium), and thermomechanical treatment (TMT) history. Currently being evaluated are, in order of ascending mp, selected alloys of niobium (e.g., Nb-1% Zr, Nb-1% Zr-0.1% C), molybdenum (e.g., Mo-13% Re), tantalum (e.g., ASTAR-811C), and tungsten (e.g., CVD W and W-25% Re). Creep properties of these alloys have been correlated via Larson-Miller, Manson-Hafered, and other empirical parameters; creep equations have been developed from these correlations. 12 figs., 8 tabs

Current Challenges in the First Principle Quantitative Modelling of the Lower Hybrid Current Drive in Tokamaks

Science.gov (United States)

Peysson, Y.; Bonoli, P. T.; Chen, J.; Garofalo, A.; Hillairet, J.; Li, M.; Qian, J.; Shiraiwa, S.; Decker, J.; Ding, B. J.; Ekedahl, A.; Goniche, M.; Zhai, X.

2017-10-01

The Lower Hybrid (LH) wave is widely used in existing tokamaks for tailoring current density profile or extending pulse duration to steady-state regimes. Its high efficiency makes it particularly attractive for a fusion reactor, leading to consider it for this purpose in ITER tokamak. Nevertheless, if basics of the LH wave in tokamak plasma are well known, quantitative modeling of experimental observations based on first principles remains a highly challenging exercise, despite considerable numerical efforts achieved so far. In this context, a rigorous methodology must be carried out in the simulations to identify the minimum number of physical mechanisms that must be considered to reproduce experimental shot to shot observations and also scalings (density, power spectrum). Based on recent simulations carried out for EAST, Alcator C-Mod and Tore Supra tokamaks, the state of the art in LH modeling is reviewed. The capability of fast electron bremsstrahlung, internal inductance li and LH driven current at zero loop voltage to constrain all together LH simulations is discussed, as well as the needs of further improvements (diagnostics, codes, LH model), for robust interpretative and predictive simulations.

The use of eddy current testing for nuclear fuel rods cladding evaluation

International Nuclear Information System (INIS)

Silva Junior, Silverio F. da; Alencar, Donizete A.; Brito, Mucio Jose D. de

2007-01-01

Nuclear fuel rods cladding must be tested after their manufacture and during their operational life. This paper describes a study about the use of eddy current test method as a nondestructive tool for nuclear fuel rods cladding evaluation. The experiments were carried out using two different probes: an external probe and an internal probe. The main goal was to verify the sensitivity of the eddy current test system, to develop calibration and reference standards and to establish the main capabilities and limitations presented by this test method for this application. (author)

Facility Interface Capability Assessment (FICA) project report

International Nuclear Information System (INIS)

Pope, R.B.; MacDonald, R.R.; Viebrock, J.M.; Mote, N.

1995-09-01

The US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for developing the Civilian Radioactive Waste Management System (CRWMS) to accept spent nuclear fuel from commercial facilities. The objective of the Facility Interface Capability Assessment (FICA) project was to assess the capability of each commercial spent nuclear fuel (SNF) storage facility, at which SNF is stored, to handle various SNF shipping casks. The purpose of this report is to present and analyze the results of the facility assessments completed within the FICA project. During Phase 1, the data items required to complete the facility assessments were identified and the database for the project was created. During Phase 2, visits were made to 122 facilities on 76 sites to collect data and information, the database was updated, and assessments of the cask-handling capabilities at each facility were performed. Each assessment of cask-handling capability contains three parts: the current capability of the facility (planning base); the potential enhanced capability if revisions were made to the facility licensing and/or administrative controls; and the potential enhanced capability if limited physical modifications were made to the facility. The main conclusion derived from the planning base assessments is that the current facility capabilities will not allow handling of any of the FICA Casks at 49 of the 122 facilities evaluated. However, consideration of potential revisions and/or modifications showed that all but one of the 49 facilities could be adapted to handle at least one of the FICA Casks. For this to be possible, facility licensing, administrative controls, and/or physical aspects of the facility would need to be modified

Facility Interface Capability Assessment (FICA) project report

Energy Technology Data Exchange (ETDEWEB)

Pope, R.B. [ed.] [Oak Ridge National Lab., TN (United States); MacDonald, R.R. [ed.] [Civilian Radioactive Waste Management System, Vienna, VA (United States); Viebrock, J.M.; Mote, N. [Nuclear Assurance Corp., Norcross, GA (United States)

1995-09-01

The US Department of Energy`s (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for developing the Civilian Radioactive Waste Management System (CRWMS) to accept spent nuclear fuel from commercial facilities. The objective of the Facility Interface Capability Assessment (FICA) project was to assess the capability of each commercial spent nuclear fuel (SNF) storage facility, at which SNF is stored, to handle various SNF shipping casks. The purpose of this report is to present and analyze the results of the facility assessments completed within the FICA project. During Phase 1, the data items required to complete the facility assessments were identified and the database for the project was created. During Phase 2, visits were made to 122 facilities on 76 sites to collect data and information, the database was updated, and assessments of the cask-handling capabilities at each facility were performed. Each assessment of cask-handling capability contains three parts: the current capability of the facility (planning base); the potential enhanced capability if revisions were made to the facility licensing and/or administrative controls; and the potential enhanced capability if limited physical modifications were made to the facility. The main conclusion derived from the planning base assessments is that the current facility capabilities will not allow handling of any of the FICA Casks at 49 of the 122 facilities evaluated. However, consideration of potential revisions and/or modifications showed that all but one of the 49 facilities could be adapted to handle at least one of the FICA Casks. For this to be possible, facility licensing, administrative controls, and/or physical aspects of the facility would need to be modified.

Calibration Efforts and Unique Capabilities of the HST Space Telescope Imaging Spectrograph

Science.gov (United States)

Monroe, TalaWanda R.; Proffitt, Charles R.; Welty, Daniel; Branton, Doug; Carlberg, Joleen K.; debes, John Henry; Lockwood, Sean; Riley, Allyssa; Sohn, Sangmo Tony; Sonnentrucker, Paule G.; Walborn, Nolan R.; Jedrzejewski, Robert I.

2018-01-01

The Space Telescope Imaging Spectrograph (STIS) continues to offer the astronomy community the ability to carry out innovative UV and optical spectroscopic and imaging studies, two decades after its deployment on the Hubble Space Telescope (HST). Most notably, STIS provides spectroscopy in the FUV and NUV, including high spectral resolution echelle modes, imaging in the FUV, optical spectroscopy, and coronagraphic capabilities. Additionally, spatial scanning on the CCD with the long-slits is now possible to enable very high S/N spectroscopic observations without saturation while mitigating telluric and fringing concerns in the far red and near-IR. This new mode may especially benefit the diffuse interstellar bands and exoplanet transiting communities. We present recent calibration efforts for the instrument, including work to optimize the calibration of the echelle spectroscopic modes by improving the flux agreement of overlapping spectral orders affected by changes in the grating blaze function since HST Servicing Mission 4. We also discuss considerations to maintain the wavelength precision of the spectroscopic modes, and the current capabilities of CCD spectroscopic spatial trails.

Arctic Observing Network Data Management: Current Capabilities and Their Promise for the Future

Science.gov (United States)

Collins, J.; Fetterer, F.; Moore, J. A.

2008-12-01

CADIS (the Cooperative Arctic Data and Information Service) serves as the data management, discovery and delivery component of the Arctic Observing Network (AON). As an International Polar Year (IPY) initiative, AON comprises 34 land, atmosphere and ocean observation sites, and will acquire much of the data coming from the interagency Study of Environmental Arctic Change (SEARCH). CADIS is tasked with ensuring that these observational data are managed for long term use by members of the entire Earth System Science community. Portions of CADIS are either in use by the community or available for testing. We now have an opportunity to evaluate the feedback received from our users, to identify any design shortcomings, and to identify those elements which serve their purpose well and will support future development. This presentation will focus on the nuts-and-bolts of the CADIS development to date, with an eye towards presenting lessons learned and best practices based on our experiences so far. The topics include: - How did we assess our users' needs, and how are those contributions reflected in the end product and its capabilities? - Why did we develop a CADIS metadata profile, and how does it allow CADIS to support preservation and scientific interoperability? - How can we shield the user from metadata complexities (especially those associated with various standards) while still obtaining the metadata needed to support an effective data management system? - How can we bridge the gap between the data storage formats considered convenient by researchers in the field, and those which are necessary to provide data interoperability? - What challenges have been encountered in our efforts to provide access to federated data (data stored outside of the CADIS system)? - What are the data browsing and visualization needs of the AON community, and which tools and technologies are most promising in terms of supporting those needs? A live demonstration of the current

The impact of current tobacco use on the outcome of paracetamol poisoning

DEFF Research Database (Denmark)

Schmidt, L E; Dalhoff, K

2003-01-01

BACKGROUND: Tobacco smoke contains a number of substances that are capable of inducing cytochrome P450. Consequently, current tobacco use may enhance the hepatotoxicity from a paracetamol overdose by increasing the oxidative metabolism of paracetamol. AIM: To evaluate, by multivariate analysis......: Current tobacco use was very frequent in patients admitted with paracetamol poisoning. It was an independent risk factor of severe hepatotoxicity, acute liver failure and death following paracetamol overdose......., the effect of current tobacco use on the morbidity and mortality from paracetamol-induced hepatotoxicity. METHODS: A retrospective study was carried out on the basis of the hospital charts of 602 patients admitted with single-dose paracetamol poisoning for whom information on current tobacco use...

Low edge safety factor operation and passive disruption avoidance in current carrying plasmas by the addition of stellarator rotational transform

Science.gov (United States)

Pandya, M. D.; ArchMiller, M. C.; Cianciosa, M. R.; Ennis, D. A.; Hanson, J. D.; Hartwell, G. J.; Hebert, J. D.; Herfindal, J. L.; Knowlton, S. F.; Ma, X.; Massidda, S.; Maurer, D. A.; Roberds, N. A.; Traverso, P. J.

2015-11-01

Low edge safety factor operation at a value less than two ( q (a )=1 /ι̷tot(a )routine on the Compact Toroidal Hybrid device with the addition of sufficient external rotational transform. Presently, the operational space of this current carrying stellarator extends down to q (a )=1.2 without significant n = 1 kink mode activity after the initial plasma current rise phase of the discharge. The disruption dynamics of these low edge safety factor plasmas depend upon the fraction of helical field rotational transform from external stellarator coils to that generated by the plasma current. We observe that with approximately 10% of the total rotational transform supplied by the stellarator coils, low edge q disruptions are passively suppressed and avoided even though q(a) disrupt, the instability precursors measured and implicated as the cause are internal tearing modes with poloidal, m, and toroidal, n, helical mode numbers of m /n =3 /2 and 4/3 observed on external magnetic sensors and m /n =1 /1 activity observed on core soft x-ray emissivity measurements. Even though the edge safety factor passes through and becomes much less than q(a) disruption phenomenology observed.

单相电流对三芯钢带铠装电缆载流量试验结果影响程度的研究%Effect of Single-phase Current on the Current-carrying Capacity of Three-core Steel Armoured Cable

Institute of Scientific and Technical Information of China (English)

牛海清; 张群峰; 游勇; 赵继光; 张尧

2014-01-01

采用剥掉铠装层通以单相电流模拟三芯钢带铠装电缆通以三相电流，将敷设于电缆沟中的完整电缆段和剥掉铠装层电缆段串联加载不同的电流进行载流量试验，对比研究了两者的温度；根据电磁场理论，计算了载流量试验中的铠装损耗。按照IEC载流量计算标准，研究了铠装损耗对载流量影响的程度。研究表明，三芯铠装电缆加载单相电流时的铠装损耗不可忽略，但对载流量的影响不超过4%，且偏保守。%The current-carrying capacity of three-core cable with and without steel armour layed in cable trench was tested through applying different single-phase current, and their temperature was compared. The loss induced by armour of the test cable was calculated according to electromagnetic field theory. The effect of loss induced by armour on the current-carrying capacity was studied according to IEC standard of current-carrying capacity. The results show that the loss induced by armour of the three-core cable can’t be neglected when applying single-phase current, and the current-carrying capacity decreases by about 4%, which is acceptable.

Urban development control based on transportation carrying capacity

Science.gov (United States)

Miharja, M.; Sjafruddin, A. H.

2017-06-01

Severe transportation problems in Indonesian urban areas are stimulated by one fundamental factor, namely lack of awareness on transportation carrying capacity in these areas development control. Urban land use development towards more physical coverage is typically not related with the capability of transportation system to accommodate additional trips volume. Lack of clear connection between development permit with its implication on the transportation side has led to a phenomenon of exceeding transport demand over supply capacity. This paper discusses the concept of urban land use development control which will be related with transport carrying capacity. The discussion would cover both supply and demand sides of transportation. From supply side, the analysis regarding the capacity of transport system would take both existing as well as potential road network capacity could be developed. From demand side, the analysis would be through the control of a maximum floor area and public transport provision. Allowed maximum floor area for development would be at the level of generating traffic at reasonable volume. Ultimately, the objective of this paper is to introduce model to incorporate transport carrying capacity in Indonesian urban land use development control.

Consumerism and the Sister Carrie's American Dream%Consumerism and the Sister Carrie''s American Dream

Institute of Scientific and Technical Information of China (English)

卢亚丽

2017-01-01

From the aspect of consumerism to this text analyze Sister Carrie's"American dream"destruction. The author wholly and deeply analyzes the embodiment of consumerism in Dreiser's Sister Carrie and Dreiser's outlook and values under the effect of consumerism. To prove that the reason for destruction of Carrie's American dream is consumerism.

Peacekeeping and Conflict Transitions: Background and Congressional Action on Civilian Capabilities

National Research Council Canada - National Science Library

Serafino, Nina M; Weiss, Martin A

2006-01-01

... from conflict to sustainable stability. These capabilities include adequate planning mechanisms for stabilization and reconstruction operations, efficient interagency coordination procedures for carrying out such tasks, and appropriate...

Conceptualizing innovation capabilities: A contingency perspective

Directory of Open Access Journals (Sweden)

Tor Helge Aas

2017-01-01

Full Text Available Empirical research has confirmed that a positive relationship exists between the implementation of innovation activities and the future performance of organizations. Firms utilize resources and capabilities to develop innovations in the form of new products, services or processes. Some firms prove to be better at reproducing innovation success than others, and the capacity to do so is referred to as innovation capability. However, the term innovation capability is ambiguously treated in extant literature. There are several different definitions of the concept and the distinction between innovation capabilities and other types of capabilities, such as dynamic capabilities, is neither explicitly stated, nor is the relationship between the concept and other resource- and capability-based concepts within strategy theory established. Although innovation is increasingly identified as crucial for a firm’s sustainable competitiveness in contemporary volatile and complex markets, the strategy-innovation link is underdeveloped in extant research. To overcome this challenge this paper raises the following research question: What type of innovation capabilities are required to innovate successfully? Due to the status of the extant research, we chose a conceptual research design to answer our research question and the paper contributes with a conceptual framework to discuss what innovation capabilities firms need to reproduce innovation success. Based on careful examination of current literature on innovation capability specifically, and the strategy-innovation link in general, we suggest that innovation capability must be viewed along two dimensions – innovation novelty and market characteristics. This framework enables the identification of four different contexts for innovation capabilities in a two-bytwo matrix. We discuss the types of innovation capabilities necessary within the four different contexts. This novel framework contributes to the

Peacekeeping and Conflict Transitions: Background and Congressional Action on Civilian Capabilities

National Research Council Canada - National Science Library

Serafino, Nina M; Weiss, Martin A

2005-01-01

... with transitions from conflict to sustainable stability. These capabilities and procedures include adequate planning mechanisms for stabilization and reconstruction operations, efficient interagency coordination structures and procedures in carrying...

Peacekeeping and Conflict Transitions: Background and Congressional Action on Civilian Capabilities

National Research Council Canada - National Science Library

Serafino, Nina M; Weiss, Martin A

2006-01-01

... with transitions from conflict to sustainable stability. These capabilities and procedures include adequate planning mechanisms for stabilization and reconstruction operations, efficient interagency coordination structures and procedures in carrying...

Development of an autonomous setup for evaluating self healing capability of asphalt mixtures

NARCIS (Netherlands)

Qiu, J.; Molenaar, A.A.A.; Van de Ven, M.F.C.; Wu, S.

2012-01-01

It is a well known fact that asphalt mixtures have self healing capabilities. Yet most of the self healing investigations are carried out using complex and time consuming fatigue tests. In order to investigate the self healing capability in a simple and efficient manner, a beam on elastic foundation

The impact of current tobacco use on the outcome of paracetamol poisoning

DEFF Research Database (Denmark)

Schmidt, L E; Dalhoff, K

2003-01-01

BACKGROUND: Tobacco smoke contains a number of substances that are capable of inducing cytochrome P450. Consequently, current tobacco use may enhance the hepatotoxicity from a paracetamol overdose by increasing the oxidative metabolism of paracetamol. AIM: To evaluate, by multivariate analysis......, the effect of current tobacco use on the morbidity and mortality from paracetamol-induced hepatotoxicity. METHODS: A retrospective study was carried out on the basis of the hospital charts of 602 patients admitted with single-dose paracetamol poisoning for whom information on current tobacco use...... was available. RESULTS: In patients admitted with paracetamol poisoning, the rate of current daily tobacco use of 70% (424 of 602 patients) was considerably higher than the rate of 31% in the background population (chi-squared test: P

Experiments on criticality carried out from 1975 till 1980

International Nuclear Information System (INIS)

Heinicke, W.; Tischer, A.; Weber, W.J.

1981-11-01

The report on hand includes the experiments on criticality published from 1975 till 1980. About 90 experiments with the most important related data are listed. They are capable of being called up, with the data base system KRITEXP, by 14 different descriptors or printed in any arrangement or order. This is the basis for a global or purposeful verification of the calculating method for criticality safety. The proof of reliability of the calculations for the criticality analysis are immediately relevant for the licencing procedure under atomic law for all plants of the nuclear fuel cycle where nuclear fuels are handled. Since no criticality experiments are being carried out in the Federal Republic of Germany, the data collection on hand will help to fill this gap with regard to the assessment of experiments carried out in other countries. (orig.) [de

Influence of the cooling rate on the main factors affecting current-carrying ability in pure and SiC-doped MgB2 superconductors

International Nuclear Information System (INIS)

Shcherbakova, O V; Pan, A V; Soltanian, S; Dou, S X; Wexler, D

2007-01-01

We have systematically studied and compared the effect of cooling rate on microstructure, critical current density, upper critical field and irreversibility field in pure and 10 wt% SiC-added MgB 2 superconductors. The sintering process was carried out on the samples at a temperature of 750 deg. C for 1 h followed by quenching or cooling to room temperature in 0.3 h (2433 deg. C h -1 ), 14 h (52 deg. C h -1 ) and 25 h (30 deg. C h -1 ). Changes in the microstructure due to variations in cooling rate have been studied with the help of scanning and transmission electron microscopy. Correlations between microstructure and superconducting properties have been observed, identified and explained for both pure and SiC-added MgB 2 samples. Modifications to the pinning environment and grain boundary transparency are considered to be responsible for variations in the current-carrying ability. The dominant pinning on grain boundaries in the pure MgB 2 samples and on nano-inclusions (inducing accompanying defects) in the SiC-doped samples is clearly distinguished. On the basis of our experimental results, we have concluded that the cooling rate can be an important parameter influencing the superconducting properties of MgB 2 samples

Detector for the liquid carried over in a gas

International Nuclear Information System (INIS)

Delisle, J.P.; Eperonnat, P.; Lions, N.

1965-01-01

This report describes an optical detector for the detection of a liquid carried over by a gas. The device is sensitive to a cumulated quantity of liquid equal to a few cubic millimetres and is capable of operating an alarm from a distance. The prototype was constructed and tested as detector for the oil leaking in the argon compressed by a diaphragm compressor. A patent for this apparatus under the number: P.V.954.703, has been deposited on 22.11.1963. (authors) [fr

National power grid simulation capability : need and issues

Energy Technology Data Exchange (ETDEWEB)

Petri, Mark C. [Argonne National Lab. (ANL), Argonne, IL (United States)

2009-06-02

On December 9 and 10, 2008, the Department of Homeland Security (DHS) Science and Technology Directorate sponsored a national workshop at Argonne National Laboratory to explore the need for a comprehensive modeling and simulation capability for the national electric power grid system. The workshop brought together leading electric power grid experts from federal agencies, the national laboratories, and academia to discuss the current state of power grid science and engineering and to assess if important challenges are being met. The workshop helped delineate gaps between grid needs and current capabilities and identify issues that must be addressed if a solution is to be implemented. This report is a result of the workshop and highlights power grid modeling and simulation needs, the barriers that must be overcome to address them, and the benefits of a national power grid simulation capability.

Graphical Visualization of Human Exploration Capabilities

Science.gov (United States)

Rodgers, Erica M.; Williams-Byrd, Julie; Arney, Dale C.; Simon, Matthew A.; Williams, Phillip A.; Barsoum, Christopher; Cowan, Tyler; Larman, Kevin T.; Hay, Jason; Burg, Alex

2016-01-01

of planned future work to modify the computer program to include additional data and of alternate capability roadmap formats currently under consideration.

Technological capability at the Brazilian official pharmaceutical laboratories

Directory of Open Access Journals (Sweden)

José Vitor Bomtempo Martins

2008-10-01

Full Text Available This paper studies the technological capability in the Brazilian Official Pharmaceutical Laboratories [OPL]. The technological capability analysis could contribute to organization strategies and governmental actions in order to improve OPL basic tasks as well to incorporate new ones, particularly concerning the innovation management. Inspired in Figueiredo (2000, 2003a, 2003b and Figueiredo and Ariffin (2003, a framework was drawn and adapted to pharmaceutical industry characteristics and current sanitary and health legislation. The framework allows to map different dimensions of the technological capability (installations, processes, products, equipments, organizational capability and knowledge management and the level attained by OPL (ordinary or innovating capability. OPL show a good development of ordinary capabilities, particularly in Product and Processes. Concerning the other dimensions, OPL are quite diverse. In general, innovating capabilities are not much developed. In the short term, it was identified a dispersion in the capacitating efforts. Considering their present level and the absorption efforts, good perspectives can be found in Installations, Processes and Organizational Capability. A lower level of efforts in Products and Knowledge Management could undermine these capabilities in the future.

Recent Investments by NASA's National Force Measurement Technology Capability

Science.gov (United States)

Commo, Sean A.; Ponder, Jonathan D.

2016-01-01

The National Force Measurement Technology Capability (NFMTC) is a nationwide partnership established in 2008 and sponsored by NASA's Aeronautics Evaluation and Test Capabilities (AETC) project to maintain and further develop force measurement capabilities. The NFMTC focuses on force measurement in wind tunnels and provides operational support in addition to conducting balance research. Based on force measurement capability challenges, strategic investments into research tasks are designed to meet the experimental requirements of current and future aerospace research programs and projects. This paper highlights recent and force measurement investments into several areas including recapitalizing the strain-gage balance inventory, developing balance best practices, improving calibration and facility capabilities, and researching potential technologies to advance balance capabilities.

Upgrading of TREAT experimental capabilities

International Nuclear Information System (INIS)

Dickerman, C.E.; Rose, D.; Bhattacharyya, S.K.

1982-01-01

The TREAT facility at the Argonne National Laboratory site in the Idaho National Engineering Laboratory is being upgraded to provide capabilities for fast-reactor-safety transient experiments not possible at any other experimental facility. Principal TREAT Upgrade (TU) goal is provision for 37-pin size experiments on energetics of core-disruptive accidents (CDA) in fast breeder reactor cores with moderate sodium void coefficients. this goal requires a significant enhancement of the capabilities of the TREAT facility, specifically including reactor control, hardened neutron spectrum incident on the test sample, and enlarged building. The upgraded facility will retain the capability for small-size experiments of the types currently being performed in TREAT. Reactor building and crane upgrading have been completed. TU schedules call for the components of the upgraded reactor system to be finished in 1984, including upgraded TREAT fuel and control system, and expanded coverage by the hodoscope fuel-motion diagnostics system

Dynamics of a plasma shell with a carrying out current

International Nuclear Information System (INIS)

Komel'kov, V.S.; Kuznetsov, A.P.; Perebejnos, V.V.; Pleshanov, A.S.; Solomonov, M.T.

1982-01-01

Experimental data on hydrogen plasma acceleration in continuous medium after plasma escape out from the coaxial plasma accelerator with discharge current approximately 1 MA and initial gas pressure approximately 10 4 Pa are obtained. Modified method of particle calculation in cells qualitatively satisfactorily describes the experiment and indicate a number of quantitative regularities of the process. The investigation made it possible to obtain qualitative characteristics on hydrogen plasma flow and displayed a number of quantitative regularities. Calculation results show the real possibility to obtain high-temperature dense plasma in continuous medium beyond the accelerator boundary

Biomechanical, Physiological, and Agility Performance of Soldiers Carrying Loads: A Comparison of the Modular Lightweight Load Carrying Equipment and a Lightning Packs, LLC, Prototype

Science.gov (United States)

2016-12-27

angle, hip angle, and sagittal plane hip moments. In terms of energy harvesting and production during walking, the current weight penalty of carrying...MODULAR LIGHTWEIGHT LOAD CARRYING EQUIPMENT) HUMAN FACTORS ENGINEERING U.S. Army Natick Soldier Research, Development and Engineering Center ATTN...pack type and walking speed at a 0% grade. .......................................................35  vii Table 20: Means (SE) of the mean and

Determination of current and rotational transform profiles in a current-carrying stellarator using soft x-ray emissivity measurements

Science.gov (United States)

Ma, X.; Cianciosa, M. R.; Ennis, D. A.; Hanson, J. D.; Hartwell, G. J.; Herfindal, J. L.; Howell, E. C.; Knowlton, S. F.; Maurer, D. A.; Traverso, P. J.

2018-01-01

Collimated soft X-ray (SXR) emissivity measurements from multi-channel cameras on the Compact Toroidal Hybrid (CTH) tokamak/torsatron device are incorporated in the 3D equilibrium reconstruction code V3FIT to reconstruct the shape of flux surfaces and infer the current distribution within the plasma. Equilibrium reconstructions of sawtoothing plasmas that use data from both SXR and external magnetic diagnostics show the central safety factor to be near unity under the assumption that SXR iso-emissivity contours lie on magnetic flux surfaces. The reconstruction results are consistent with those using the external magnetic data and a constraint on the location of q = 1 surfaces determined from the sawtooth inversion surface extracted from SXR brightness profiles. The agreement justifies the use of approximating SXR emission as a flux function in CTH, at least within the core of the plasma, subject to the spatial resolution of the SXR diagnostics. This improved reconstruction of the central current density indicates that the current profile peakedness decreases with increasing external transform and that the internal inductance is not a relevant measure of how peaked the current profile is in hybrid discharges.

The Interface of IT Capabilities and Disruptive Innovations

DEFF Research Database (Denmark)

Baiyere, Abayomi

2017-01-01

The occurrence of disruptive innovations tends to challenge the fabric, structure and capability that define firms facing their threat. Prior research indicates that the capacity of a firm to restructure and reconfigure its resources to face/leverage such turbulent situations is dependent on how...... well it can orchestrate its capabilities. Although IT capability has been identified as one of the essential capability of today’s organisations, managers as well as researchers are yet to uncover the dynamics through which an organisation’s IT capability can be leveraged in disruptive innovation...... situations. This paper contributes to our understanding in this direction by conceptually exploring the different roles of an organisation's IT capabilitiy in disruptive innovation scenarios. The paper provides a synthesis of the current state of knowledge about both concepts and extends this to highlight...

Accelerator and Electrodynamics Capability Review

International Nuclear Information System (INIS)

Jones, Kevin W.

2010-01-01

Los Alamos National Laboratory (LANL) uses capability reviews to assess the science, technology and engineering (STE) quality and institutional integration and to advise Laboratory Management on the current and future health of the STE. Capability reviews address the STE integration that LANL uses to meet mission requirements. The Capability Review Committees serve a dual role of providing assessment of the Laboratory's technical contributions and integration towards its missions and providing advice to Laboratory Management. The assessments and advice are documented in reports prepared by the Capability Review Committees that are delivered to the Director and to the Principal Associate Director for Science, Technology and Engineering (PADSTE). Laboratory Management will use this report for STE assessment and planning. LANL has defined fifteen STE capabilities. Electrodynamics and Accelerators is one of the seven STE capabilities that LANL Management (Director, PADSTE, technical Associate Directors) has identified for review in Fiscal Year (FY) 2010. Accelerators and electrodynamics at LANL comprise a blend of large-scale facilities and innovative small-scale research with a growing focus on national security applications. This review is organized into five topical areas: (1) Free Electron Lasers; (2) Linear Accelerator Science and Technology; (3) Advanced Electromagnetics; (4) Next Generation Accelerator Concepts; and (5) National Security Accelerator Applications. The focus is on innovative technology with an emphasis on applications relevant to Laboratory mission. The role of Laboratory Directed Research and Development (LDRD) in support of accelerators/electrodynamics will be discussed. The review provides an opportunity for interaction with early career staff. Program sponsors and customers will provide their input on the value of the accelerator and electrodynamics capability to the Laboratory mission.

Accelerator and electrodynamics capability review

Energy Technology Data Exchange (ETDEWEB)

Jones, Kevin W [Los Alamos National Laboratory

2010-01-01

Los Alamos National Laboratory (LANL) uses capability reviews to assess the science, technology and engineering (STE) quality and institutional integration and to advise Laboratory Management on the current and future health of the STE. Capability reviews address the STE integration that LANL uses to meet mission requirements. The Capability Review Committees serve a dual role of providing assessment of the Laboratory's technical contributions and integration towards its missions and providing advice to Laboratory Management. The assessments and advice are documented in reports prepared by the Capability Review Committees that are delivered to the Director and to the Principal Associate Director for Science, Technology and Engineering (PADSTE). Laboratory Management will use this report for STE assessment and planning. LANL has defined fifteen STE capabilities. Electrodynamics and Accelerators is one of the seven STE capabilities that LANL Management (Director, PADSTE, technical Associate Directors) has identified for review in Fiscal Year (FY) 2010. Accelerators and electrodynamics at LANL comprise a blend of large-scale facilities and innovative small-scale research with a growing focus on national security applications. This review is organized into five topical areas: (1) Free Electron Lasers; (2) Linear Accelerator Science and Technology; (3) Advanced Electromagnetics; (4) Next Generation Accelerator Concepts; and (5) National Security Accelerator Applications. The focus is on innovative technology with an emphasis on applications relevant to Laboratory mission. The role of Laboratory Directed Research and Development (LDRD) in support of accelerators/electrodynamics will be discussed. The review provides an opportunity for interaction with early career staff. Program sponsors and customers will provide their input on the value of the accelerator and electrodynamics capability to the Laboratory mission.

Proof-Carrying Hardware: Concept and Prototype Tool Flow for Online Verification

OpenAIRE

Drzevitzky, Stephanie; Kastens, Uwe; Platzner, Marco

2010-01-01

Dynamically reconfigurable hardware combines hardware performance with software-like flexibility and finds increasing use in networked systems. The capability to load hardware modules at runtime provides these systems with an unparalleled degree of adaptivity but at the same time poses new challenges for security and safety. In this paper, we elaborate on the presentation of proof carrying hardware (PCH) as a novel approach to reconfigurable system security. PCH takes ...

[Ecological carrying capacity and Chongming Island's ecological construction].

Science.gov (United States)

Wang, Kaiyun; Zou, Chunjing; Kong, Zhenghong; Wang, Tianhou; Chen, Xiaoyong

2005-12-01

This paper overviewed the goals of Chongming Island's ecological construction and its background, analyzed the current eco-economic status and constraints of the Island, and put forward some scientific issues on its ecological construction. It was suggested that for the resources-saving and sustainable development of the Island, the researches on its ecological construction should be based on its ecological carrying capacity, fully take the regional characteristics into consideration, and refer the successful development modes at home and abroad. The carrying capacity study should ground on systemic and dynamic views, give a thorough evaluation of the Island's present carrying capacity, simulate its possible changes, and forecast its demands and risks. Operable countermeasures to promote the Island's carrying capacity should be worked out, new industry structure, population scale, and optimized distribution projects conforming to regional carrying capacity should be formulated, and effective ecological security alarming and control system should be built, with the aim of providing suggestions and strategic evidences for the decision-making of economic development and sustainable environmental resources use of the region.

Electrostatic Discharge Current Linear Approach and Circuit Design Method

Directory of Open Access Journals (Sweden)

Pavlos K. Katsivelis

2010-11-01

Full Text Available The Electrostatic Discharge phenomenon is a great threat to all electronic devices and ICs. An electric charge passing rapidly from a charged body to another can seriously harm the last one. However, there is a lack in a linear mathematical approach which will make it possible to design a circuit capable of producing such a sophisticated current waveform. The commonly accepted Electrostatic Discharge current waveform is the one set by the IEC 61000-4-2. However, the over-simplified circuit included in the same standard is incapable of producing such a waveform. Treating the Electrostatic Discharge current waveform of the IEC 61000-4-2 as reference, an approximation method, based on Prony’s method, is developed and applied in order to obtain a linear system’s response. Considering a known input, a method to design a circuit, able to generate this ESD current waveform in presented. The circuit synthesis assumes ideal active elements. A simulation is carried out using the PSpice software.

Structural Capability of an Organization toward Innovation Capability

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev; Momeni, Mostafa

2016-01-01

The scholars in the field of strategic management have developed two major approaches for attainment of competitive advantage: an approach based on environmental opportunities, and another one based on internal capabilities of an organization. Some investigations in the last two decades have...... indicated that the advantages relying on the internal capabilities of organizations may determine the competitive position of organizations better than environmental opportunities do. Characteristics of firms shows that one of the most internal capabilities that lead the organizations to the strongest...... competitive advantage in the organizations is the innovation capability. The innovation capability is associated with other organizational capabilities, and many organizations have focused on the need to identify innovation capabilities.This research focuses on recognition of the structural aspect...

Carry

DEFF Research Database (Denmark)

Koijen, Ralph S.J.; Moskowitz, Tobias; Pedersen, Lasse Heje

2018-01-01

-sectionally and in time series for a host of different asset classes, including global equities, global bonds, commodities, US Treasuries, credit, and options. Carry is not explained by known predictors of returns from these asset classes, and it captures many of these predictors, providing a unifying framework...... for return predictability. We reject a generalized version of Uncovered Interest Parity and the Expectations Hypothesis in favor of models with varying risk premia, in which carry strategies are commonly exposed to global recession, liquidity, and volatility risks, though none fully explains carry’s premium....

The Virtual Ship - A New Capability in Support of Maritime Forces

National Research Council Canada - National Science Library

Best, John

1999-01-01

...) systems, weapons and the platform itself. There is currently a gap in the capability to rigorously study these integration requirements in a laboratory environment Additionally, the capability is lacking to comprehensively investigate...

Developing a Current Capability Design for Manufacture Framework in the Aerospace Industry

OpenAIRE

Whiteside, A.; Shehab, Essam; Beadle, C.; Percival, M.

2009-01-01

Organised by: Cranfield University During progressive product design and development in the aerospace industry, a lack of effective communication between the sequential functions of design, manufacturing and assembly often causes delays and setbacks whereby production capabilities are unable to realise design intent in high-complexity product models. As a result, there is a need to formalise the progressive release of an engineering model to production functions during New Prod...

A study on electricity export capability of the μCHP system with spot price

DEFF Research Database (Denmark)

You, Shi; Træholt, Chresten; Poulsen, Bjarne

2009-01-01

of the muCHP unit, which influence the export capability of muCHP system, is firstly carried out in the intraday case study, followed by the annual case study which explores the annual system performance. The results show that the electricity export capability of a muCHP system is closely related to its...

Exosomes carrying immunoinhibitory proteins and their role in cancer.

Science.gov (United States)

Whiteside, T L

2017-09-01

Recent emergence of exosomes as information carriers between cells has introduced us to a new previously unknown biological communication system. Multi-directional cross-talk mediated by exosomes carrying proteins, lipids and nucleic acids between normal cells, cells harbouring a pathogen or cancer and immune cells has been instrumental in determining outcomes of physiological as well as pathological conditions. Exosomes play a key role in the broad spectrum of human diseases. In cancer, tumour-derived exosomes carry multiple immunoinhibitory signals, disable anti-tumour immune effector cells and promote tumour escape from immune control. Exosomes delivering negative signals to immune cells in cancer, viral infections, autoimmune or other diseases may interfere with therapy and influence outcome. Exosomes can activate tissue cells to produce inhibitory factors and thus can suppress the host immune responses indirectly. Exosomes also promise to be non-invasive disease biomarkers with a dual capability to provide insights into immune dysfunction as well as disease progression and outcome. © 2017 British Society for Immunology.

Intent, Capability and Opportunity: A Holistic Approach to Addressing Proliferation as a Risk Management Issue

International Nuclear Information System (INIS)

Rynes, Amanda; Bjornard, Trond

2011-01-01

Currently, proliferation risk assessment models are designed to evaluate only a portion of the overall risk, focusing exclusively on either technological or social factors to determine the extent of a threat. Many of these models are intended to act as a means of predicting proliferation potential rather than assessing the system as a whole, ignoring the ability to enhance mitigating factors and manage, rather just establish the presence of, the threat. While the information garnered through these forms of analysis is necessary, it remains incomplete. By incorporating political, social, economic and technical capabilities as well as human factors such as intent into a single, multi-faceted risk management model, proliferation risk can be evaluated more effectively. Framing this information around how to improve and expand the Regime already in place and establishing where there are gaps in the system allows for a more complete approach to risk management, mitigation and resource allocation. The research conducted here seeks to combine all three elements (intent, capability and opportunity) in a comprehensive evaluation which incorporates an assessment of state-level variables, possible proliferation pathways and technical capability. Each portion of the analysis is carried out independently then combined to illustrate the full scope of a State's nuclear infrastructure while showing areas of weakness in the institutional framework.

US Public Opinion on Carrying Firearms in Public Places.

Science.gov (United States)

Wolfson, Julia A; Teret, Stephen P; Azrael, Deborah; Miller, Matthew

2017-06-01

To estimate US public opinion, overall and by gun ownership status, about the public places where legal gun owners should be allowed to carry firearms. We fielded an online survey among 3949 adults, including an oversample of gun owners and veterans, in April 2015. We used cross-tabulations with survey weights to generate nationally representative estimates. Fewer than 1 in 3 US adults supported gun carrying in any of the specified venues. Support for carrying in public was consistently higher among gun owners than among non-gun owners. Overall, support for carrying in public was lowest for schools (19%; 95% confidence interval [CI] = 16.7, 21.1), bars (18%; 95% CI = 15.9, 20.6), and sports stadiums (17%; 95% CI = 15.0, 19.5). Most Americans, including most gun owners, support restricting public places legal gun owners can carry firearms. These views contrast sharply with the current trend in state legislatures of expanding where, how, and by whom guns can be carried in public. Recent state laws and proposed federal legislation that would force states to honor out-of-state concealed carry permits are out of step with American public opinion.

Evaluating total carrying capacity of tourism using impact indicators

Directory of Open Access Journals (Sweden)

R. Sharma

2016-03-01

Full Text Available The carrying capacity is well identified tool to manage problems due to uncontrolled tourism for any destination. This report highlights the carrying capacity estimation of Kerwa tourism area, Bhopal, India. The methodology used in this report is a new two-tier mechanism of impact analysis using index numbers derived from a survey of 123 stakeholders. From this the individual component impact analysis and the total carrying capacity of the area is computed in order to state the insight of the total carrying capacity left for the tourism activities in Kerwa tourism area. It is calculated from, the results so obtained, that the Kerwa catchment area falls in “very low impact category” and hence in a healthy state of the artwork in terms of total carrying capacity. The study conveys the current need in the destination management and tourism development as a road map for the destination managers for implementing sustainable tourism.

Toward Vision Oriented Organization through Foresight Capability Development

Directory of Open Access Journals (Sweden)

Gianita BLEOJU

2014-11-01

Full Text Available Dealing with complexity is becoming increasingly difficult for organizations, due to limited replicable abilities, once management performance was remunerated by successful decisions on the marketplace. The competitive advantage, based upon current documented organizational management expertise, deployed into patterns of competitive behavior, prove to be unsustainable. Therefore, we assist to a relative emergency of strategic intelligence adjustment framework, to channel the managerial capability mechanisms, from current detective orientation capabilities toward anticipatory ones. Based upon exploitation of an organizational profiling database, we try our contribution to this challenging debate, by formulating recommendations for strategic adjustment and prototype testing of the potential solutions, through a designed transition matrix from market oriented to vision oriented organizations.

Environmental conditions during breeding modify the strength of mass-dependent carry-over effects in a migratory bird.

Directory of Open Access Journals (Sweden)

Xavier A Harrison

Full Text Available In many animals, processes occurring in one season carry over to influence reproductive success and survival in future seasons. The strength of such carry-over effects is unlikely to be uniform across years, yet our understanding of the processes that are capable of modifying their strength remains limited. Here we show that female light-bellied Brent geese with higher body mass prior to spring migration successfully reared more offspring during breeding, but only in years where environmental conditions during breeding were favourable. In years of bad weather during breeding, all birds suffered reduced reproductive output irrespective of pre-migration mass. Our results suggest that the magnitude of reproductive benefits gained by maximising body stores to fuel breeding fluctuates markedly among years in concert with conditions during the breeding season, as does the degree to which carry-over effects are capable of driving variance in reproductive success among individuals. Therefore while carry-over effects have considerable power to drive fitness asymmetries among individuals, our ability to interpret these effects in terms of their implications for population dynamics is dependent on knowledge of fitness determinants occurring in subsequent seasons. 

Post Irradiation Capabilities at the Idaho National Laboratory

International Nuclear Information System (INIS)

Schulthess, J.L.; Rosenberg, K.E.

2011-01-01

The U.S. Department of Energy (DOE), Office of Nuclear Energy (NE) oversees the efforts to ensure nuclear energy remains a viable option for the United States. A significant portion of these efforts are related to post-irradiation examinations (PIE) of highly activated fuel and materials that are subject to the extreme environment inside a nuclear reactor. As the lead national laboratory, Idaho National Laboratory (INL) has a rich history, experience, workforce and capabilities for performing PIE. However, new advances in tools and techniques for performing PIE now enable understanding the performance of fuels and materials at the nano-scale and smaller level. Examination at this level is critical since this is the scale at which irradiation damage occurs. The INL is on course to adopt these advanced tools and techniques to develop a comprehensive nuclear fuels and materials characterization capability that is unique in the world. Because INL has extensive PIE capabilities currently in place, a strong foundation exist to build upon as new capabilities are implemented and work load increases. In the recent past, INL has adopted significant capability to perform advanced PIE characterization. Looking forward, INL is planning for the addition of two facilities that will be built to meet the stringent demands of advanced tools and techniques for highly activated fuels and materials characterization. Dubbed the Irradiated Materials Characterization Laboratory (IMCL) and Advanced Post Irradiation Examination Capability, these facilities are next generation PIE laboratories designed to perform the work of PIE that cannot be performed in current DOE facilities. In addition to physical capabilities, INL has recently added two significant contributors to the Advanced Test Reactor-National Scientific User Facility (ATR-NSUF), Oak Ridge National Laboratory and University of California, Berkeley.

Study on Tourist Carrying Capacity Based on Matter Element Analysis

Institute of Scientific and Technical Information of China (English)

LiuYunguo; FanTing; LiXin; ZhouMing; WangXianhai

2005-01-01

This paper proposes that it is necessary to implement the concept of tourist carrying capacity to facilitate the tourism planning, and presents a method to evaluate the carrying capacity. The method called matter element analysis can solve the uncertain and incompatible problem of the evaluated factors in assessing carrying capacity.The current state of a destination's carrying capacity can be determined by establishing the standard indexes and the matter element model. Through the evaluating of the travel industry zones of the Autonomous Prefecture of Western Hunan, the method is proved to be simple and feasible, and it is improved to be significant for the tourism planning and determination as well as the sustainable development of the regional tourism.

Innovation Inspired by Nature: Capabilities, Potentials and Challenges

Science.gov (United States)

Bar-Cohen, Yoseph

2012-01-01

Through evolution, nature came up with many effective solutions to its challenges and continually improving them. By mimicking, coping and being inspired, humans have been using Nature's solutions to address their own challenges. In recent years, the implementation of nature's capabilities has intensified with our growing understanding of the various biological and nastic mechanisms and processes. Successes include even the making of humanlike robots that perform such lifelike tasks as walking, talking, making eye-contact, interpreting speech and facial expressions, as well as many other humanlike functions. Generally, once humans are able to implement a function then, thru rapid advances in technology, capabilities are developed that can significantly exceed the original source of inspiration in Nature. Examples include flight where there is no species that can fly as high, carry so much mass, has so large dimensions and fly so fast, and operate at as such extreme conditions as our aircraft and other aerospace systems. However, using the capabilities of today's technology, there are many challenges that are not feasible to address in mimicking characteristics of species and plants. In this manuscript, state-of-the-art of biomimetic capabilities, potentials and challenges are reviewed.

Evaluation of physical conditional capabilities in athletes with physical motors limitations

Directory of Open Access Journals (Sweden)

Indira de las Mercedes Saínz-Reyes

2015-06-01

Full Text Available This research was carried out in the province of Holguin with the disabled athletes competing in T53 mode event 100 m levels. It was determined as a scientific problem: How to evaluate the conditional physical capabilities in athletes with physical motor limitations in athletics? and as objective: To adapt functional tests to evaluate the conditional physical capabilities in athletes with physical motor limitations in athletics. A selection of functional test was carried out applying then some methodological modifications in order to make them easier for disabled athletes in wheelchairs. Theoretical and empirical levels methods as well as consensus techniques were used. The research has an adequate scientific rigor since a methodologies theoretical foundation on conditional physical capabilities and their evaluation by functional testing. Through the nominal group it could be determined the feasibility of the proposal, since the consulted experts came to the consensus that the chosen and modified functional tests can be applied to disabled athletes in wheelchairs, and recognized that through them it can be checked the training level of these athletes and the influence of the physical exercise in their organism.

System Reliability Analysis Capability and Surrogate Model Application in RAVEN

Energy Technology Data Exchange (ETDEWEB)

Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Alfonsi, Andrea [Idaho National Lab. (INL), Idaho Falls, ID (United States); Huang, Dongli [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gleicher, Frederick [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wang, Bei [Idaho National Lab. (INL), Idaho Falls, ID (United States); Adbel-Khalik, Hany S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Pascucci, Valerio [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-11-01

This report collect the effort performed to improve the reliability analysis capabilities of the RAVEN code and explore new opportunity in the usage of surrogate model by extending the current RAVEN capabilities to multi physics surrogate models and construction of surrogate models for high dimensionality fields.

Methodological Individualism and the Organizational Capabilities Approach

DEFF Research Database (Denmark)

Felin, Teppo; Foss, Nicolai Juul

2004-01-01

AbstractDuring the last decade, strategy scholars have increasingly converged on organizationalcapabilities as a key construct in strategy research. We explicate some of the underlying,unstated assumptions of current capabilities-based work by drawing on seminal work in thephilosophy of social...... critical individual-levelconsiderations, including individual action and heterogeneity. In this note we do not denyor reject the notion of routines or capabilities per se, but rather call for an increasedemphasis on how these collective structures originate and change as a result of individualactions...

Atmospheric Release Advisory Capability

International Nuclear Information System (INIS)

Dickerson, M.H.; Gudiksen, P.H.; Sullivan, T.J.

1983-02-01

The Atmospheric Release Advisory Capability (ARAC) project is a Department of Energy (DOE) sponsored real-time emergency response service available for use by both federal and state agencies in case of a potential or actual atmospheric release of nuclear material. The project, initiated in 1972, is currently evolving from the research and development phase to full operation. Plans are underway to expand the existing capability to continuous operation by 1984 and to establish a National ARAC Center (NARAC) by 1988. This report describes the ARAC system, its utilization during the past two years, and plans for its expansion during the next five to six years. An integral part of this expansion is due to a very important and crucial effort sponsored by the Defense Nuclear Agency to extend the ARAC service to approximately 45 Department of Defense (DOD) sites throughout the continental US over the next three years

Finite element analysis of ageing reinforced and prestressed concrete structures in nuclear plant - An international review of current capabilities and priorities for future developments

International Nuclear Information System (INIS)

2002-01-01

Nuclear plants contain a variety of concrete structures whose structural performance is essential to the safety of the plant. There is a requirement to demonstrate the robustness of these structures during normal operating and extreme accident conditions, throughout their life. During this time, the concrete may degrade due to the effects of ageing. This degradation must be accounted for during the assessment of their performance. Finite Element Analysis (FEA) techniques have tremendous potential for providing valuable insight into the behaviour of these aged concrete structures under a range of different loading conditions. Advanced FEA techniques currently enjoy widespread use within the nuclear industry for the non-linear analysis of concrete. Many practitioners within the nuclear industry are at the forefront of the industrial application of these methods. However, in some areas, the programs that are commercially available lag behind the best information available from research. This document is an international review of current capabilities and priorities for future development relating to non-linear finite element analysis of reinforced and prestressed concrete in the nuclear industry in the various member states. Particular attention is paid to the analysis of degraded or ageing structures. This report: 1. Summarises the needs for FEA of aged concrete nuclear structures; 2. Details the existing capabilities, not just in terms of what the software is capable of, but also in terms of the current practices employed by those in industry; 3. Looks at how engineers, within the nuclear industry, working in this field would like to see methods improved, and identifies the factors that are limiting current practice; 4. Summarises ongoing research that may provide beneficial technological advances; 5. Assigns priorities to the different development requests; 6. Selects those developments that are felt to be of greatest benefit to industry and provides a qualitative

SuperMAG: Present and Future Capabilities

Science.gov (United States)

Hsieh, S. W.; Gjerloev, J. W.; Barnes, R. J.

2009-12-01

SuperMAG is a global collaboration that provides ground magnetic field perturbations from a long list of stations in the same coordinate system, identical time resolution and with a common baseline removal approach. This unique high quality dataset provides a continuous and nearly global monitoring of the ground magnetic field perturbation. Currently, only archived data are available on the website and hence it targets basic research without any operational capabilities. The existing SuperMAG software can be easily adapted to ingest real-time or near real-time data and provide a now-casting capability. The SuperDARN program has a long history of providing near real-time maps of the northern hemisphere electrostatic potential and as both SuperMAG and SuperDARN share common software it is relatively easy to adapt these maps for global magnetic perturbations. Magnetometer measurements would be assimilated by the SuperMAG server using a variety of techniques, either by downloading data at regular intervals from remote servers or by real-time streaming connections. The existing SuperMAG analysis software would then process these measurements to provide the final calibrated data set using the SuperMAG coordinate system. The existing plotting software would then be used to produce regularly updated global plots. The talk will focus on current SuperMAG capabilities illustrating the potential for now-casting and eventually forecasting.

Concepts for reducing nuclear utility inventory carrying costs

International Nuclear Information System (INIS)

Graybill, R.E.; DiCola, F.E.; Solanas, C.H.

1985-01-01

Nuclear utilities are under pressure to reduce their operating and maintenance expenses such that the total cost of generating electricity through nuclear power remains an economically attractive option. One area in which expenses may be reduced is total inventory carrying cost. The total inventory carrying cost consists of financing an inventory, managing the inventory, assuring quality, engineering of acceptable parts specifications, and procuring initial and replenishment stock. Concepts and methodology must be developed to reduce the remaining expenses of a utility's total inventory carrying cost. Currently, two concepts exist: pooled inventory management system (PIMS), originally established by General Electric Company and a group of boiling water reactor owners, and Nuclear Parts Associates' (NUPA) shared inventory management program (SIMP). Both concepts share or pool parts and components among utilities. The SIMP program objectives and technical activities are summarized

Investigation on Capability of Reaming Process using Minimal Quantity Lubrication

DEFF Research Database (Denmark)

De Chiffre, Leonardo; Tosello, Guido; Piska, Miroslav

2008-01-01

An investigation on reaming using minimal quantity lubrication (MQL) was carried out with the scope of documenting process capability using a metrological approach. Reaming tests were carried out on austenitic stainless steel, using HSS reamers with different cutting data and lubrication conditions...... depth of cut was employed. The suitability of MQL for reaming was proven under the investigated process conditions, concerning both the quality of the machined holes, in terms of geometrical characteristics and surface finishing, and the process quality, with respect to reaming torque and thrust, along...

Pulse Power Capability Estimation of Lithium Titanate Oxide-based Batteries

DEFF Research Database (Denmark)

Stroe, Ana-Irina; Swierczynski, Maciej Jozef; Stroe, Daniel Loan

2016-01-01

The pulse power capability (PPC) represents one of the parameters that describe the performance behavior of Lithium-ion batteries independent on the application. Consequently, extended information about the Li-ion battery PPC and its dependence on the operating conditions become necessary. Thus......, this paper analyzes the power capability characteristic of a 13Ah high power Lithium Titanate Oxide-based battery and its dependence on temperature, load current and state-of-charge. Furthermore, a model to predict the discharging PPC of the battery cell at different temperatures and load currents for three...

The new MCNP6 depletion capability

International Nuclear Information System (INIS)

Fensin, M. L.; James, M. R.; Hendricks, J. S.; Goorley, J. T.

2012-01-01

The first MCNP based in-line Monte Carlo depletion capability was officially released from the Radiation Safety Information and Computational Center as MCNPX 2.6.0. Both the MCNP5 and MCNPX codes have historically provided a successful combinatorial geometry based, continuous energy, Monte Carlo radiation transport solution for advanced reactor modeling and simulation. However, due to separate development pathways, useful simulation capabilities were dispersed between both codes and not unified in a single technology. MCNP6, the next evolution in the MCNP suite of codes, now combines the capability of both simulation tools, as well as providing new advanced technology, in a single radiation transport code. We describe here the new capabilities of the MCNP6 depletion code dating from the official RSICC release MCNPX 2.6.0, reported previously, to the now current state of MCNP6. NEA/OECD benchmark results are also reported. The MCNP6 depletion capability enhancements beyond MCNPX 2.6.0 reported here include: (1) new performance enhancing parallel architecture that implements both shared and distributed memory constructs; (2) enhanced memory management that maximizes calculation fidelity; and (3) improved burnup physics for better nuclide prediction. MCNP6 depletion enables complete, relatively easy-to-use depletion calculations in a single Monte Carlo code. The enhancements described here help provide a powerful capability as well as dictate a path forward for future development to improve the usefulness of the technology. (authors)

The New MCNP6 Depletion Capability

International Nuclear Information System (INIS)

Fensin, Michael Lorne; James, Michael R.; Hendricks, John S.; Goorley, John T.

2012-01-01

The first MCNP based inline Monte Carlo depletion capability was officially released from the Radiation Safety Information and Computational Center as MCNPX 2.6.0. Both the MCNP5 and MCNPX codes have historically provided a successful combinatorial geometry based, continuous energy, Monte Carlo radiation transport solution for advanced reactor modeling and simulation. However, due to separate development pathways, useful simulation capabilities were dispersed between both codes and not unified in a single technology. MCNP6, the next evolution in the MCNP suite of codes, now combines the capability of both simulation tools, as well as providing new advanced technology, in a single radiation transport code. We describe here the new capabilities of the MCNP6 depletion code dating from the official RSICC release MCNPX 2.6.0, reported previously, to the now current state of MCNP6. NEA/OECD benchmark results are also reported. The MCNP6 depletion capability enhancements beyond MCNPX 2.6.0 reported here include: (1) new performance enhancing parallel architecture that implements both shared and distributed memory constructs; (2) enhanced memory management that maximizes calculation fidelity; and (3) improved burnup physics for better nuclide prediction. MCNP6 depletion enables complete, relatively easy-to-use depletion calculations in a single Monte Carlo code. The enhancements described here help provide a powerful capability as well as dictate a path forward for future development to improve the usefulness of the technology.

Dynamic modelling and robust current control of wind-turbine driven DFIG during external AC voltage dip

Institute of Scientific and Technical Information of China (English)

HU Jia-bing; HE Yi-kang

2006-01-01

Doubly-FedInduction Generator (DFIG), with vector control applied, is widely used in Variable-Speed ConstantFrequency (VSCF) windenergy generation system and shows good performance in maximum wind energy capture. But in two traditional vector control schemes, the equivalent stator magnetizing current is considered invariant in order to simplify the rotor current inner-loop controller. The two schemes can perform very well when the grid is in normal condition. However, when grid disturbance such as grid voltage dip or swell fault occurs, the control performance worsens, the rotor over current occurs and the Fault Ride-Through (FRT) capability of the DFIG wind energy generation system gets seriously deteriorated. An accurate DFIG model was used to deeply investigate the deficiency of the traditional vector control. The improved control schemes of two typical traditional vector control schemes used in DFIG were proposed, and simulation study of the proposed and traditional control schemes, with robust rotor current control using Internal Model Control (IMC) method, was carried out. The validity of the proposed modified schemes to control the rotor current and to improve the FRT capability of the DFIG wind energy generation system was proved by the comparison study.

Researching pharmacist managerial capability: philosophical perspectives and paradigms of inquiry.

Science.gov (United States)

Woods, Phillip; Gapp, Rod; King, Michelle A

2015-01-01

In successful community pharmacy business enterprises suitably responsive actions to meet ever-increasing change require capable pharmacy managers who readily learn and adapt. Capability as a concept is generally understood to be the ability of a manager to identify and act to solve unfamiliar problems in unfamiliar situations. Capability is characterized by adaptability and flexibility. However, different understandings of the concept 'capability' and what it means to be 'capable' are indirect and incomplete. This paper aims to clarify current theories regarding the concept of 'capability' at the level of the individual, and through this to make more explicit what is known about the phenomenon, but more particularly, how we know what we know. The analysis includes the concept of 'competence' because explanations of capability include competence, and the two concepts are not clearly separated in the literature. By probing the epistemological origins of current theory concerning both concepts, the limiting taken for granted assumptions are revealed. Assumptions about context and time, and the psychological theory through which individuals are assumed to perceive, know and learn, are illuminated. The analysis, in connection with the literature, shows how the interpretive philosophic research approach may reveal a different and useful theoretical perspective for explaining capability as a dynamic performance. It is suggested that such a perspective may narrow the gap between the theory of capability and its practice. The interpretive perspective holds potential to reveal how capability, as performed by successful community pharmacy managers, might be further researched and strengthened. This paper supports the challenging suggestion that pharmacy social research needs to rebalance the dominance of purely empirical research by exploring interpretive methodologies to better understand human actions and relations in the context of pharmacy. Crown Copyright © 2015

Materials capability review Los Alamos National Laboratory, May 3-6, 2010

Energy Technology Data Exchange (ETDEWEB)

Taylor, Antoinette [Los Alamos National Laboratory

2010-01-01

The 2010 'Capability Review' process at LANL significantly differs from the Division reviews of prior years. The Capabilities being reviewed (some 4-8 per year) are deliberately chosen to be crosscutting over the Laboratory, and therefore will include not only several experimental, theoretical and simulation disciplines, but also contributions from multiple line organizations. This approach is consistent with the new Laboratory organizational structure, focusing on agile and integrated capabilities applied to present national security missions, and also nurtured to be available for rapid application to future missions. The overall intent is that the Committee assess the quality of the science, engineering, and technology identified in the agenda, and advise the LANS Board of Governors and Laboratory management. Specifically, the Committees will: (1) Assess the quality of science, technology and engineering within the Capability in the areas defined in the agenda. Identify issues to develop or enhance the core competencies within this capability. (2) Evaluate the integration of this capability across the Laboratory organizations that are listed in the agenda in terms of joint programs, projects, proposals, and/or publications. Describe the integration of this capability in the wider scientific community using the recognition as a leader within the community, ability to set research agendas, and attraction and retention of staff. (3) Assess the quality and relevance of this capability's science, technology and engineering contributions to current and emerging Laboratory programs, including Nuclear Weapons, Threat Reduction/Homeland Security, and Energy Security. (4) Advise the Laboratory Director/Principal Associate Director for Science, Technology and Engineering on the health of the Capability including the current and future (5 year) science, technology and engineering staff needs, mix of research and development activities, program opportunities

Location estimation of approaching objects is modulated by the observer's inherent and momentary action capabilities

NARCIS (Netherlands)

Kandula, Manasa; Hofman, Dennis; Dijkerman, H Chris

2016-01-01

Action capability may be one of the factors that can influence our percept of the world. A distinction can be made between momentary action capability (action capability at that particular moment) and inherent action capability (representing a stable action capability). In the current study, we

Off-Gas Adsorption Model Capabilities and Recommendations

Energy Technology Data Exchange (ETDEWEB)

Lyon, Kevin L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Welty, Amy K. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Law, Jack [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ladshaw, Austin [Georgia Inst. of Technology, Atlanta, GA (United States); Yiacoumi, Sotira [Georgia Inst. of Technology, Atlanta, GA (United States); Tsouris, Costas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-03-01

Off-gas treatment is required to reduce emissions from aqueous fuel reprocessing. Evaluating the products of innovative gas adsorption research requires increased computational simulation capability to more effectively transition from fundamental research to operational design. Early modeling efforts produced the Off-Gas SeParation and REcoverY (OSPREY) model that, while efficient in terms of computation time, was of limited value for complex systems. However, the computational and programming lessons learned in development of the initial model were used to develop Discontinuous Galerkin OSPREY (DGOSPREY), a more effective model. Initial comparisons between OSPREY and DGOSPREY show that, while OSPREY does reasonably well to capture the initial breakthrough time, it displays far too much numerical dispersion to accurately capture the real shape of the breakthrough curves. DGOSPREY is a much better tool as it utilizes a more stable set of numerical methods. In addition, DGOSPREY has shown the capability to capture complex, multispecies adsorption behavior, while OSPREY currently only works for a single adsorbing species. This capability makes DGOSPREY ultimately a more practical tool for real world simulations involving many different gas species. While DGOSPREY has initially performed very well, there is still need for improvement. The current state of DGOSPREY does not include any micro-scale adsorption kinetics and therefore assumes instantaneous adsorption. This is a major source of error in predicting water vapor breakthrough because the kinetics of that adsorption mechanism is particularly slow. However, this deficiency can be remedied by building kinetic kernels into DGOSPREY. Another source of error in DGOSPREY stems from data gaps in single species, such as Kr and Xe, isotherms. Since isotherm data for each gas is currently available at a single temperature, the model is unable to predict adsorption at temperatures outside of the set of data currently

Spatial buckling analysis of current-carrying nanowires in the presence of a longitudinal magnetic field accounting for both surface and nonlocal effects

Science.gov (United States)

Foroutan, Shahin; Haghshenas, Amin; Hashemian, Mohammad; Eftekhari, S. Ali; Toghraie, Davood

2018-03-01

In this paper, three-dimensional buckling behavior of nanowires was investigated based on Eringen's Nonlocal Elasticity Theory. The electric current-carrying nanowires were affected by a longitudinal magnetic field based upon the Lorentz force. The nanowires (NWs) were modeled based on Timoshenko beam theory and the Gurtin-Murdoch's surface elasticity theory. Generalized Differential Quadrature (GDQ) method was used to solve the governing equations of the NWs. Two sets of boundary conditions namely simple-simple and clamped-clamped were applied and the obtained results were discussed. Results demonstrated the effect of electric current, magnetic field, small-scale parameter, slenderness ratio, and nanowires diameter on the critical compressive buckling load of nanowires. As a key result, increasing the small-scale parameter decreased the critical load. By the same token, increasing the electric current, magnetic field, and slenderness ratio resulted in a decrease in the critical load. As the slenderness ratio increased, the effect of nonlocal theory decreased. In contrast, by expanding the NWs diameter, the nonlocal effect increased. Moreover, in the present article, the critical values of the magnetic field of strength and slenderness ratio were revealed, and the roles of the magnetic field, slenderness ratio, and NWs diameter on higher buckling loads were discussed.

DDoS-Capable IoT Malwares: Comparative Analysis and Mirai Investigation

Directory of Open Access Journals (Sweden)

Michele De Donno

2018-01-01

Full Text Available The Internet of Things (IoT revolution has not only carried the astonishing promise to interconnect a whole generation of traditionally “dumb” devices, but also brought to the Internet the menace of billions of badly protected and easily hackable objects. Not surprisingly, this sudden flooding of fresh and insecure devices fueled older threats, such as Distributed Denial of Service (DDoS attacks. In this paper, we first propose an updated and comprehensive taxonomy of DDoS attacks, together with a number of examples on how this classification maps to real-world attacks. Then, we outline the current situation of DDoS-enabled malwares in IoT networks, highlighting how recent data support our concerns about the growing in popularity of these malwares. Finally, we give a detailed analysis of the general framework and the operating principles of Mirai, the most disruptive DDoS-capable IoT malware seen so far.

Impact of Personnel Capabilities on Organizational Innovation Capability

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev; Momeni, Mostafa

2016-01-01

in this rapidly changing world. This research focuses on definition of the personnel aspect of innovation capability, and proposes a conceptual model based on the scientific articles of academic literature on organisations innovation capability. This paper includes an expert based validation in three rounds...... of the Delphi method. And for the purpose of a better appreciation of the relationship dominating the factors of the model, it has distributed the questionnaire to Iranian companies in the Food industry. This research proposed a direct relationship between Innovation Capability and the Personnel Capability...

Carrying Capacity

DEFF Research Database (Denmark)

Schroll, Henning; Andersen, Jan; Kjærgård, Bente

2012-01-01

A spatial planning act was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive....../cities. Four different sectors (water, food production, waste, and forests) were selected as core areas for decentralised spatial planning. Indicators for SCC and ACC were identified and assessed with regard to relevance and quantifiability. For each of the indicators selected, a legal threshold or guiding...... was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive carrying capacity (SCC) and assimilative...

Investigation on Capability of the Reaming Process using Minimal Quantity Lubrication

DEFF Research Database (Denmark)

De Chiffre, Leonardo; Tosello, Guido; Píška, Miroslav

2009-01-01

An investigation on reaming usingminimal quantity lubrication (MQL) was carried out with the scope of documenting process capability using a metrological approach. Reaming tests were carried out on austenitic stainless steel, using HSS reamers with different cutting data and lubrication conditions...... depth of cut was employed. The suitability of MQL for reaming was proven under the investigated process conditions, concerning both the quality of the machined holes, in terms of geometrical characteristics and surface finishing, and the process quality, with respect to reaming torque and thrust, along...

Available transfer capability calculation considering voltage stability margin

International Nuclear Information System (INIS)

Pan, Xiong; Xu, Guoyu

2005-01-01

To make the electricity trades carry out successfully, the calculation of available transfer capability (ATC) must coordinate the relationship between the security and economic benefits. In this paper, a model for ATC calculations accorded with trade-off mechanism in electricity market was set up. The impact of branch outage contingency on the static voltage stability margin was analyzed, and contingency ranking was performed through sensitivity indices of branch flows with respect to the loading margin. Optimal power flow based on primal-dual interior point method was applied to obtain ATC when the N-1 security constraints were included. The calculation results of IEEE 30-bus and IEEE 118-bus systems show that the proposed model and method are valid. (author) (N-1 security constraints; Electricity market; Available transfer capability; Optimal power flow; Voltage stability)

Topological currents in neutron stars: kicks, precession, toroidal fields, and magnetic helicity

International Nuclear Information System (INIS)

Charbonneau, James; Zhitnitsky, Ariel

2010-01-01

The effects of anomalies in high density QCD are striking. We consider a direct application of one of these effects, namely topological currents, on the physics of neutron stars. All the elements required for topological currents are present in neutron stars: degenerate matter, large magnetic fields, and parity violating processes. These conditions lead to the creation of vector currents capable of carrying momentum and inducing magnetic fields. We estimate the size of these currents for many representative states of dense matter in the neutron star and argue that they could be responsible for the large proper motion of neutron stars (kicks), the toroidal magnetic field and finite magnetic helicity needed for stability of the poloidal field, and the resolution of the conflict between type-II superconductivity and precession. Though these observational effects appear unrelated, they likely originate from the same physics — they are all P-odd phenomena that stem from a topological current generated by parity violation

Intent, Capability and Opportunity: A Holistic Approach to Addressing Proliferation as a Risk Management Issue

Energy Technology Data Exchange (ETDEWEB)

Amanda Rynes; Trond Bjornard

2011-07-01

Currently, proliferation risk assessment models are designed to evaluate only a portion of the overall risk, focusing exclusively on either technological or social factors to determine the extent of a threat. Many of these models are intended to act as a means of predicting proliferation potential rather than assessing the system as a whole, ignoring the ability to enhance mitigating factors and manage, rather just establish the presence of, the threat. While the information garnered through these forms of analysis is necessary, it remains incomplete. By incorporating political, social, economic and technical capabilities as well as human factors such as intent into a single, multi-faceted risk management model, proliferation risk can be evaluated more effectively. Framing this information around how to improve and expand the Regime already in place and establishing where there are gaps in the system allows for a more complete approach to risk management, mitigation and resource allocation. The research conducted here seeks to combine all three elements (intent, capability and opportunity) in a comprehensive evaluation which incorporates an assessment of state-level variables, possible proliferation pathways and technical capability. Each portion of the analysis is carried out independently then combined to illustrate the full scope of a State's nuclear infrastructure while showing areas of weakness in the institutional framework.

Group Capability Model

Science.gov (United States)

Olejarski, Michael; Appleton, Amy; Deltorchio, Stephen

2009-01-01

The Group Capability Model (GCM) is a software tool that allows an organization, from first line management to senior executive, to monitor and track the health (capability) of various groups in performing their contractual obligations. GCM calculates a Group Capability Index (GCI) by comparing actual head counts, certifications, and/or skills within a group. The model can also be used to simulate the effects of employee usage, training, and attrition on the GCI. A universal tool and common method was required due to the high risk of losing skills necessary to complete the Space Shuttle Program and meet the needs of the Constellation Program. During this transition from one space vehicle to another, the uncertainty among the critical skilled workforce is high and attrition has the potential to be unmanageable. GCM allows managers to establish requirements for their group in the form of head counts, certification requirements, or skills requirements. GCM then calculates a Group Capability Index (GCI), where a score of 1 indicates that the group is at the appropriate level; anything less than 1 indicates a potential for improvement. This shows the health of a group, both currently and over time. GCM accepts as input head count, certification needs, critical needs, competency needs, and competency critical needs. In addition, team members are categorized by years of experience, percentage of contribution, ex-members and their skills, availability, function, and in-work requirements. Outputs are several reports, including actual vs. required head count, actual vs. required certificates, CGI change over time (by month), and more. The program stores historical data for summary and historical reporting, which is done via an Excel spreadsheet that is color-coded to show health statistics at a glance. GCM has provided the Shuttle Ground Processing team with a quantifiable, repeatable approach to assessing and managing the skills in their organization. They now have a common

Capability Paternalism

NARCIS (Netherlands)

Claassen, R.J.G.|info:eu-repo/dai/nl/269266224

A capability approach prescribes paternalist government actions to the extent that it requires the promotion of specific functionings, instead of the corresponding capabilities. Capability theorists have argued that their theories do not have much of these paternalist implications, since promoting

Current constrained voltage scaled reconstruction (CCVSR) algorithm for MR-EIT and its performance with different probing current patterns

International Nuclear Information System (INIS)

Birguel, Oezlem; Eyueboglu, B Murat; Ider, Y Ziya

2003-01-01

Conventional injected-current electrical impedance tomography (EIT) and magnetic resonance imaging (MRI) techniques can be combined to reconstruct high resolution true conductivity images. The magnetic flux density distribution generated by the internal current density distribution is extracted from MR phase images. This information is used to form a fine detailed conductivity image using an Ohm's law based update equation. The reconstructed conductivity image is assumed to differ from the true image by a scale factor. EIT surface potential measurements are then used to scale the reconstructed image in order to find the true conductivity values. This process is iterated until a stopping criterion is met. Several simulations are carried out for opposite and cosine current injection patterns to select the best current injection pattern for a 2D thorax model. The contrast resolution and accuracy of the proposed algorithm are also studied. In all simulation studies, realistic noise models for voltage and magnetic flux density measurements are used. It is shown that, in contrast to the conventional EIT techniques, the proposed method has the capability of reconstructing conductivity images with uniform and high spatial resolution. The spatial resolution is limited by the larger element size of the finite element mesh and twice the magnetic resonance image pixel size

Revisiting the Fundamentals and Capabilities of the Stack Compression Test

DEFF Research Database (Denmark)

Alves, L.M.; Nielsen, Chris Valentin; Martin, P.A.F.

2011-01-01

performance by comparing the flow curves obtained from its utilisation with those determined by means of compressive testing carried out on solid cylinder specimens of the same material. Results show that mechanical testing of materials by means of the stack compression test is capable of meeting...... the increasing demand of accurate and reliable flow curves for sheet metals....

Calotropis procera: a preliminary survey on its phytoextracion capabilities

International Nuclear Information System (INIS)

Barbosa, Newton P.U.; Fernandes, Geraldo W.; Menezes, Romulo S.C.; Almeida-Cortez, Jarcilene S.

2009-01-01

Calotropis procera (Apocynaceae) is an exotic species, from Africa and Asia, introduced in North-eastern Brazil at the beginning of last century; C. procera is a ruderal plant (adapted to poor soil), fit to survive in dry environments, that blooms and fructifies all year round, and its seeds germinate easily. With these characteristics, it is not surprising that its invasiveness has become a matter of concern: its presence has already been reported among native vegetation of caatinga, savannah and rain forest in Brazil. C. procera has medical uses, in India, for many ailments; other uses are as forage, textile and food applications, and as fuel; Furthermore, it is capable of accumulating heavy metals and metalloids; comparisons between leaf samples from polluted and non-polluted sites were already carried out by different authors. Due to the above mentioned, it was decided to analyse, through neutron activation analysis, k 0 -method, samples of leaves of C. procera, from polluted and non-polluted sites from the State of Pernambuco, in order to verify which elements were present; samples of the soils from these regions were also analysed. The results that will be presented strongly suggest that C. procera might be an accumulator of Se, and, what has not been reported before, it is capable of absorbing Ba, Cs, La, Sc, Sm, Sr, Ta and Th; also, our results indicate that experiments under controlled conditions should be carried out, in order to ascertain that C. procera is really capable of accumulating the mentioned elements, and its possibilities in phytoremediation strategies. (author)

Calotropis procera: a preliminary survey on its phytoextracion capabilities

Energy Technology Data Exchange (ETDEWEB)

Barbosa, Newton P.U.; Fernandes, Geraldo W. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Lab. de Ecologia Evolutiva e Biodiversidade], e-mail: newtonulhoa@gmail.com, e-mail: gw.fernandes@gmail.com; Uemura, George; Menezes, Maria Angela B.C.; Matos, Ludmila V.S.; Silva, Maria Aparecida da [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN-CNEN/MG), Belo Horizonte, MG (Brazil)], e-mail: george@cdtn.br, e-mail: menezes@cdtn.br; Menezes, Romulo S.C. [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear], e-mail: rmenezes@ufpe.br; Almeida-Cortez, Jarcilene S. [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Lab. de Interacao Planta-Animal], e-mail: cortez_jarcy@yahoo.com

2009-07-01

Calotropis procera (Apocynaceae) is an exotic species, from Africa and Asia, introduced in North-eastern Brazil at the beginning of last century; C. procera is a ruderal plant (adapted to poor soil), fit to survive in dry environments, that blooms and fructifies all year round, and its seeds germinate easily. With these characteristics, it is not surprising that its invasiveness has become a matter of concern: its presence has already been reported among native vegetation of caatinga, savannah and rain forest in Brazil. C. procera has medical uses, in India, for many ailments; other uses are as forage, textile and food applications, and as fuel; Furthermore, it is capable of accumulating heavy metals and metalloids; comparisons between leaf samples from polluted and non-polluted sites were already carried out by different authors. Due to the above mentioned, it was decided to analyse, through neutron activation analysis, k{sub 0}-method, samples of leaves of C. procera, from polluted and non-polluted sites from the State of Pernambuco, in order to verify which elements were present; samples of the soils from these regions were also analysed. The results that will be presented strongly suggest that C. procera might be an accumulator of Se, and, what has not been reported before, it is capable of absorbing Ba, Cs, La, Sc, Sm, Sr, Ta and Th; also, our results indicate that experiments under controlled conditions should be carried out, in order to ascertain that C. procera is really capable of accumulating the mentioned elements, and its possibilities in phytoremediation strategies. (author)

Current Capabilities and Development Potential in Surgical Robotics

Directory of Open Access Journals (Sweden)

Mathias Hoeckelmann

2015-05-01

Full Text Available Commercial surgical robots have been in clinical use since the mid-1990s, supporting surgeons in various tasks. In the past decades, many systems emerged as research platforms, and a few entered the global market. This paper summarizes the currently available surgical systems and research directions in the broader field of surgical robotics. The widely deployed teleoperated manipulators aim to enhance human cognitive and physical skills and provide smart tools for surgeons, while image-guided robotics focus on surpassing human limitations by introducing automated targeting and treatment delivery methods. Both concepts are discussed based on prototypes and commercial systems. Through concrete examples the possible future development paths of surgical robots are illustrated. While research efforts are taking different approaches to improve the capacity of such systems, the aim of this survey is to assess their maturity from the commercialization point of view.

New facility boost CSIRO's micromanfacturing capability

International Nuclear Information System (INIS)

Grad, Paul.

1997-01-01

CSIRO is developing a leading edge microengineering capability, an electron beam lithography and device fabrication facility. Structures of submicron size can be manufactured and incorporated in microelectronic or micromechanical devices. Current and potential uses are outlined in this paper and include: chemical sensors, electronic surveillance and radar systems, microsensors, micromotors and microgages to be used in telecommunication, environment monitoring or medicine

Long-Endurance, Ice-capable Autonomous Seagliders

Science.gov (United States)

Lee, Craig; Gobat, Jason; Shilling, Geoff; Curry, Beth

2013-04-01

Autonomous Seagliders capable of extended (many months) operation in ice-covered waters have been developed and successfully employed as part of the US Arctic Observing Network. Seagliders operate routinely in lower-latitude oceans for periods of up to 9 months to provide persistent sampling in difficult, remote conditions, including strong boundary currents and harsh wintertime subpolar seas. The Arctic Observing Network calls for sustained occupation of key sections within the Arctic Ocean and across the critical gateways that link the Arctic to lower-latitude oceans, motivating the extension of glider technologies to permit operation in ice-covered waters. When operating in open water, gliders rely on GPS for navigation and Iridium satellite phones for data and command telemetry. Ice cover blocks access to the sea surface and thus prevents gliders from using these critical services. When operating under ice, ice-capable Seagliders instead navigate by trilateration from an array of RAFOS acoustic sound sources and employ advanced autonomy to make mission-critical decisions (previously the realm of the human pilot) and identify and exploit leads in the ice to allow intermittent communication through Iridium. Davis Strait, one of the two primary pathways through which Arctic waters exit into the subpolar North Atlantic, provided a convenient site for development of ice-capable Seagliders at a location where the resulting measurements could greatly augment the existing observing system. Initial testing of 780 Hz RAFOS sources in Davis Strait, substantiated by the performance of the operational array, indicates effective ranges of 100-150 km in ice-covered waters. Surface ducting and reflection off the ice bottom significantly degrade the range from the 500+ km expected in ice-free conditions. Comparisons between GPS and acoustically-derived positions collected during operations in ice-free conditions suggest 1-2 km uncertainty in the acoustically-derived positions

Blind spots of dynamic capabilities: A systems theoretic perspective

Directory of Open Access Journals (Sweden)

Robert Burisch

2016-05-01

Full Text Available Dynamic capabilities remain one of the most popular, but also one of the most controversial topics in current knowledge and innovation research. This study exposes strengths and weaknesses of existing conceptualizations of dynamic capabilities by using a systems theoretic lens. Systems theory suggests that organizations operate in environments they cannot fully understand. Thus, organizational action patterns inevitably involve simplification, selectivity and uncertainty leading to inherent blind spots in every kind of strategic action. As the resulting insight, fully flexible organizational capabilities might not be achievable and continuous adaptation to every kind of environmental change cannot be possible from a systems theoretic perspective. Accordingly, this work discusses empirical difficulties that derive from the preceding argumentation and outlines a corresponding re-conceptualization of the dynamic capabilities concept.

Composite Elements for Biomimetic Aerospace Structures with Progressive Shape Variation Capabilities

Directory of Open Access Journals (Sweden)

Alessandro Airoldi

2016-07-01

Full Text Available The paper presents some engineering solutions for the development of innovative aerodynamic surfaces with the capability of progressive shape variation. A brief introduction of the most significant issues related to the design of such morphing structures is provided. Thereafter, two types of structural solutions are presented for the design of internal compliant structures and flexible external skins. The proposed solutions exploit the properties and the manufacturing techniques of long fibre reinforced plastic in order to fulfil the severe and contradictory requirements related to the trade-off between morphing performance and load carrying capabilities.

Current Projects Strengthening Capabilities in Disused Sealed Radioactive Source (DSRS) Management

International Nuclear Information System (INIS)

Roughan, Cathleen Maura

2017-01-01

IAEA NEFW-WTS Operations - Overview: •Condition and store or remove DSRS Categories 1-5 •Provide tools and technology for management of DSRS •Assist in design of facilities for safe and secure handling and storage •Work with suppliers, recycles and service company providers to find suitable handling and transport options – limited options available •Coordinated missions with Safety, Security to address DSRS needs in the Member State – holistic approach •Build capacity and sustainability in Member States. Qualified Technical Centre: •Increase the worldwide capability to manage DSRS: –Encouraging countries with well-equipped centres or facilities and trained personnel to provide a range of technical services for the management of DSRS; –Within their countries and regionally; –Assist in implementing IAEA activities; •Build capacity and sustainability in MSs

Modeling Jet Interaction of a Round Jet with a Subsonic Carrying Flow

Directory of Open Access Journals (Sweden)

Yu. P. Korobkova

2017-01-01

Full Text Available The paper analyzes numerical simulation of the round jet with a subsonic carrying flow. Performs calculations for different tilt angles of the jet ωj blowing and constructs the fields of velocities and pressures of the flow, jet trajectory, as well as calculates the pressure coefficients on the plate surface.To solve this problem, the CAD Solidworks Flow Simulation software was used. This package contains the solution of the Nowier-Stokes equation, which is necessary for modeling this problem.To test operation capability of the closing condition (k-th model of turbulence and proper choice of the boundaries of the computational domain, was solved a test problem forThe solution analysis has shown that the k-th model of turbulence was capable, and has a good agreement with other authors' experiment results [4]. Based on the selected conditions, further calculations were carried out for different tilt angles of jet blowing.In the course of research activities, it was revealed that the tilt angle of the jet blowing has a strong impact on redistribution of velocity and pressure in the area of the jet interaction, which allows the efficient use of such jets to control aerodynamic characteristics of the aircraft with the same power consumption for blowing out the gas. The solution of this problem is very relevant in wide application in aviation and rocket and space technology.

European TBM for ITER: Structural material assessment and breeding capability - Comparative analysis

International Nuclear Information System (INIS)

Herreras, Y.; Perlado, J.M.; Ibarra, A.

2007-01-01

Full text of publication follows: The ITER European Party is currently developing for DEMO reactor specifications two breeding blanket concepts: the Helium-Cooled Lithium-Lead blanket (HCLL), using a liquid breeder; and the Helium-Cooled Pebble-Bed blanket (HCPB), using a lithiated solid breeder. These two research lines are expected to be tested in ITER as Test Blanket Modules (TBM), in order to demonstrate their safety, economical and environmental suitability. In this sense, structural material activation and breeding blanket capability represent two major challenges. This paper presents new calculations regarding neutronic irradiation inside the ITER Vacuum Vessel. In particular, results are focused on the irradiation affecting the equatorial ports, where the TBM will be located for testing. The methodology employed mainly consists in calculating the neutronic irradiation levels at the required locations with the transport code MCNP, where the input geometry has been previously designed with the program CATIA V5. The main structural materials proposed for the European Test blanket Modules are selected in order to carry out a comparative analysis in safety terms: material activation and basic parameters for damage analysis are evaluated with the code ACAB, based on the neutronic irradiation results mentioned above. Finally, the breeding blanket capability is assessed for both breeding blanket concepts; the results are compared considering the choice of the structural material. (authors)

On the capabilities and limitations of high altitude pseudo-satellites

Science.gov (United States)

Gonzalo, Jesús; López, Deibi; Domínguez, Diego; García, Adrián; Escapa, Alberto

2018-04-01

The idea of self-sustaining air vehicles that excited engineers in the seventies has nowadays become a reality as proved by several initiatives worldwide. High altitude platforms, or Pseudo-satellites (HAPS), are unmanned vehicles that take advantage of weak stratospheric winds and solar energy to operate without interfering with current commercial aviation and with enough endurance to provide long-term services as satellites do. Target applications are communications, Earth observation, positioning and science among others. This paper reviews the major characteristics of stratospheric flight, where airplanes and airships will compete for best performance. The careful analysis of involved technologies and their trends allow budget models to shed light on the capabilities and limitations of each solution. Aerodynamics and aerostatics, structures and materials, propulsion, energy management, thermal control, flight management and ground infrastructures are the critical elements revisited to assess current status and expected short-term evolutions. Stratospheric airplanes require very light wing loading, which has been demonstrated to be feasible but currently limits their payload mass to few tenths of kilograms. On the other hand, airships need to be large and operationally complex but their potential to hover carrying hundreds of kilograms with reasonable power supply make them true pseudo-satellites with enormous commercial interest. This paper provides useful information on the relative importance of the technology evolutions, as well as on the selection of the proper platform for each application or set of payload requirements. The authors envisage prompt availability of both types of HAPS, aerodynamic and aerostatic, providing unprecedented services.

Aerodynamic Improvements to Cargo Carrying Rail Cars due to Roof Modifications

Science.gov (United States)

Condie, Robert; Maynes, Daniel

2012-11-01

The aerodynamic drag associated with the transport of commodities by rail is becoming increasingly important as the cost of diesel fuel increases. We provide an assessment of the influence of the roof structure on aerodynamic performance of two dissimilar rail cars, namely automobile carrying cars and coal carrying cars. Currently, the roof material for automobile carrying rail cars is corrugated steel, with the corrugation aligned perpendicular to the direction of travel. Coal cars are currently left uncovered for loading convenience and on the return leg from the power plant are empty. Aerodynamic drag data have been obtained through wind tunnel testing on 1/29 scale models to understand the savings that may be realized by judicious modification to the tops of both these car types. For the automobile-carrying cars, testing is performed for the corrugated and smooth roof configurations. This modification alone has the potential of reducing the car drag coefficient by nominally 25%. A broader study is performed for the coal cars, with data being acquired for coal filled models, empty models, and several cover prototype configurations. The results reveal that implementation of a cover may yield reductions in the aerodynamic drag for both coal filled (nominally 7%) and empty coal cars (nominally 30%).

Design Mechanism as Territorial Strategic Capability

Directory of Open Access Journals (Sweden)

Gianita BLEOJU

2009-01-01

Full Text Available The current exigencies that a territory must faced in order to its’ optimalpositioning in future regional competition requires the ability to design theappropriate mechanism which better valorize the territory capability. Such aconstruct is vital for territorial sustainable development and supposes thecreation of a specific body of knowledge from distinctive local resourceexploitation and unique value creation and allocation. Territorial mechanismdesign is a typical management decision about identification, ownership andcontrol of specific strategic capabilities and their combination in a distinctiveterritorial portfolio. The most difficult responsibility is to allocate the territorialvalue added which is a source of conflict among territorial components. Ourcurrent paper research covers the basics of two complementary territorialpillars-rural and tourism potential and proves the lack of specific designmechanisms which explain the current diminishing value of Galati Brailaregion. The proposed management system, relying upon territorial controlmechanism, will ensure knowledge sharing process via collaborative learning,with the final role of appropriate territorial attractivity signals, reinforcingidentity as key factor of territorial attractability. Our paper is fully documentedon there years of data analyzing from territorial area of interest. This offers usthe necessary empiric contrasting for our proposed solution.

Aircraft Capability Management

Science.gov (United States)

Mumaw, Randy; Feary, Mike

2018-01-01

This presentation presents an overview of work performed at NASA Ames Research Center in 2017. The work concerns the analysis of current aircraft system management displays, and the initial development of an interface for providing information about aircraft system status. The new interface proposes a shift away from current aircraft system alerting interfaces that report the status of physical components, and towards displaying the implications of degradations on mission capability. The proposed interface describes these component failures in terms of operational consequences of aircraft system degradations. The research activity was an effort to examine the utility of different representations of complex systems and operating environments to support real-time decision making of off-nominal situations. A specific focus was to develop representations that provide better integrated information to allow pilots to more easily reason about the operational consequences of the off-nominal situations. The work is also seen as a pathway to autonomy, as information is integrated and understood in a form that automated responses could be developed for the off-nominal situations in the future.

Current status of radiation transport tools for proliferation and terrorism prevention

International Nuclear Information System (INIS)

Sale, K.E.

2004-01-01

Full text: We will present the current status and future plans for the set of calculational tools and databases developed and maintained at LLNL. The calculational tools include the Monte Carlo codes TART 1) and COG 2) as well as the deterministic code ARDRA 3) . In addition to these codes we use currently there is a major development effort for a new massively parallel transport code. An important part of the capability we're developing is a sophisticated user interface, based on a commercial 3-D modeling product, to improve the model development process. A major part of this user interface tool is being developed by Strela 4) under the Nuclear Cities Initiative. Strela has developed a hub-and-spoke technology for code input interconversions (between COG, TART and MCNP) and will produce the plug-ins that extend the capabilities of the 3-D modeler for use as a radiation transport input generator. The major advantages of this approach are the built-in user interface for 3-D modeling and the ability to read a large variety of CAD-file formats. In addition to supporting our current radiation transport codes and developing new capabilities we are working on some nuclear data needs for homeland security. These projects are carried out and the Lawrence Berkeley National Laboratory 88' cyclotron and at the Institute for Nuclear Research of the Nation Academy of Science of Ukraine under and STCU contract. Reference: 1. http://www.llnl.gov/cullen1/mc/htm; 2. http://www-phys.llnl.gov/N_Div/COG/ETR/ETR_9306.html; 3. http://www.llnl.gov/CASC/asciturb/talks/PPT-HTML.131596/tsld030.htm; 4. http://strela.snz.ru/

Sandia Laboratories technical capabilities. Auxiliary capabilities: environmental health information science

International Nuclear Information System (INIS)

1975-09-01

Sandia Laboratories is an engineering laboratory in which research, development, testing, and evaluation capabilities are integrated by program management for the generation of advanced designs. In fulfilling its primary responsibility to ERDA, Sandia Laboratories has acquired extensive research and development capabilities. The purpose of this series of documents is to catalog the many technical capabilities of the Laboratories. After the listing of capabilities, supporting information is provided in the form of highlights, which show applications. This document deals with auxiliary capabilities, in particular, environmental health and information science. (11 figures, 1 table) (RWR)

Leveraging Innovation Capabilities of Asian Micro, Small and ...

International Development Research Centre (IDRC) Digital Library (Canada)

Leveraging Innovation Capabilities of Asian Micro, Small and Medium Enterprises through Intermediary Organizations. Micro, small and medium enterprises (MSMEs) are a source of livelihood for billions of poor people worldwide. The current global economic downturn has hit these enterprises particularly hard, putting ...

Current status of radiation transport tools for proliferation and terrorism prevention

International Nuclear Information System (INIS)

Sale, K.E.

2004-01-01

We present the current status and future plans for the set of calculational tools and data bases developed and maintained at LLNL. The calculational tools include the Monte Carlo codes TART and COG as well as the deterministic code ARDRA. In addition to these codes presently in use there is a major development effort for a new massively parallel transport code. An important part of the capability we're developing is a sophisticated user interface, based on a commercial 3-D modeling product, to improve the model development process. A major part of this user interface tool is being developed by Strela under the Nuclear Cities Initiative. Strela has developed a hub-and-spoke technology for code input interconversions (between COG, TART and MCNP) and will produce the plug-ins that extend the capabilities of the 3-D modeler for use as a radiation transport input generator. The major advantages of this approach are the built-in user interface for 3-D modeling and the ability to read a large variety of CAD-file formats. In addition to supporting our current radiation transport codes and developing new capabilities we are working on some nuclear data needs for homeland security. These projects are carried out and the Lawrence Berkeley National Laboratory 88' cyclotron and at the Institute for Nuclear Research of the Nation Academy of Science of Ukraine under and STCU contract. (author)

Kinetic studies on purification capability of channel flow type wastewater treatment plant

Energy Technology Data Exchange (ETDEWEB)

Hashimoto, S [Fukui Institute of Technology, Fukui (Japan); Furukawa, K; Kim, J [Osaka Univ., Osaka (Japan). Faculty of Engineering

1990-10-01

In order to develop a wastewater treatment process of secondary effluent and a wastewater treatment process of a farm village, some experiments have been carried out using bench scale and full scale hydroponic type wastewater treatment plant. This wastewater treatment system mainly consists of water channels and hydroponic water tanks. The authors carried out of a kinetic study for purification capability of the water channels while assuring the growth of microorganism in the treatment scheme. It was shown experimentally that the channel flow type wastewater treatment plant had a high TOC removal capability regardless of the kind of contact material and treatment time. Activated sludge microorganism concentration in water channels was obtained by kinetic estimation from the measured effluent suspended solid concentration. Estimated amount of activated sludge in water channels comprised only 11.5-37.4 percent of the measured amounts of withdrawn sludge, indicating high photosynthesis production of algae in water channels. 8 refs., 4 figs., 5 tabs.

Diagnosing the uncertainty and detectability of emission reductions for REDD + under current capabilities: an example for Panama

International Nuclear Information System (INIS)

Pelletier, Johanne; Potvin, Catherine; Ramankutty, Navin

2011-01-01

In preparation for the deployment of a new mechanism that could address as much as one fifth of global greenhouse gas emissions by reducing emissions from deforestation and forest degradation (REDD +), important work on methodological issues is still needed to secure the capacity to produce measurable, reportable, and verifiable emissions reductions from REDD + in developing countries. To contribute to this effort, we have diagnosed the main sources of uncertainty in the quantification of emission from deforestation for Panama, one of the first countries to be supported by the Forest Carbon Partnership Facility of the World Bank and by UN-REDD. Performing sensitivity analyses using a land-cover change emissions model, we identified forest carbon stocks and the quality of land-cover maps as the key parameters influencing model uncertainty. The time interval between two land-cover assessments, carbon density in fallow and secondary forest, and the accuracy of land-cover classifications also affect our ability to produce accurate estimates. Further, we used the model to compare emission reductions from five different deforestation reduction scenarios drawn from governmental input. Only the scenario simulating a reduction in deforestation by half succeeds in crossing outside the confidence bounds surrounding the baseline emission obtained from the uncertainty analysis. These results suggest that with current data, real emission reductions in developing countries could be obscured by their associated uncertainties. Ways of addressing the key sources of error are proposed, for developing countries involved in REDD + , for improving the accuracy of their estimates in the future. These new considerations confirm the importance of current efforts to establish forest monitoring systems and enhance capabilities for REDD + in developing countries.

LAMPF II capabilities from an experimenter's viewpoint

International Nuclear Information System (INIS)

Macek, R.J.

1985-01-01

LAMPF II has been proposed to extend the intensity frontier of nuclear and particle physics from about 1 GeV to 45 GeV. It is reviewed here with emphasis on capabilities of the experimental facilities. Major accelerator features, costs, and the choice of energy and current are also discussed. 5 refs., 16 figs

Micronization increases vitamin E carrying and releasing abilities of insoluble fiber.

Science.gov (United States)

Hsu, Pang-Kuei; Chien, Po-Jung; Chau, Chi-Fai

2008-03-26

This study was to investigate the effects of micronization on vitamin-carrying capacity and slow-release ability of carambola (starfruit) insoluble fiber (IF) and cellulose using in vitro and in vivomodels. Upon micronization, carambola IF (8.1 microm) underwent structural changes to expose more functional groups in the fiber matrix and to exhibit higher oil-holding capacity ( approximately 20.4-fold). Micronized fibers in forms of fiber-vitamin composites, particularly the micronized carambola IF-vitamin composite, were capable of carrying vitamin E (alpha-tocopherol) up to 9.6-fold over their unmicronized forms and releasing nutrient gradually. Animal studies demonstrated that the adminstration of micronized carambola IF-vitamin composite could maintain the plasma vitamin E of rats at relatively higher levels (2.1-3.6-fold of the initial values) for at least 5 h. The results suggested that micronized fibers, particularly the micronized carambola IF, could be exploited as potential nutrient carriers in food applications and also be used to produce slow-release formulations.

Current Capabilities at SNL for the Integration of Small Modular Reactors onto Smart Microgrids Using Sandia's Smart Microgrid Technology High Performance Computing and Advanced Manufacturing.

Energy Technology Data Exchange (ETDEWEB)

Rodriguez, Salvador B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-05-01

Smart grids are a crucial component for enabling the nation’s future energy needs, as part of a modernization effort led by the Department of Energy. Smart grids and smart microgrids are being considered in niche applications, and as part of a comprehensive energy strategy to help manage the nation’s growing energy demands, for critical infrastructures, military installations, small rural communities, and large populations with limited water supplies. As part of a far-reaching strategic initiative, Sandia National Laboratories (SNL) presents herein a unique, three-pronged approach to integrate small modular reactors (SMRs) into microgrids, with the goal of providing economically-competitive, reliable, and secure energy to meet the nation’s needs. SNL’s triad methodology involves an innovative blend of smart microgrid technology, high performance computing (HPC), and advanced manufacturing (AM). In this report, Sandia’s current capabilities in those areas are summarized, as well as paths forward that will enable DOE to achieve its energy goals. In the area of smart grid/microgrid technology, Sandia’s current computational capabilities can model the entire grid, including temporal aspects and cyber security issues. Our tools include system development, integration, testing and evaluation, monitoring, and sustainment.

MTR fuel plate qualification capabilities at SCK-CEN

International Nuclear Information System (INIS)

Koonen, E.; Jacquet, P.

2002-01-01

In order to enhance the capabilities of BR2 in the field of MTR fuel plate testing, a dedicated irradiation device has been designed. In its basic version this device allows the irradiation of 3 fuel plates. The central fuel plate may be replaced by a dummy plate or a plate carrying dosimeters. A first FUTURE device has been built. A benchmark irradiation has been executed with standard BR2 fuel plates in order to qualify this device. Detailed neutronic calculations were performed and the results compared to the results of the post-irradiation examinations of the plates. These comparisons demonstrate the capability to conduct a fuel plate irradiation program under requested and well-known irradiation conditions. Further improvements are presently being designed in order to extend the ranges of heat flux and surface temperature of the fuel plates that can be handled with the FUTURE device. (author)

Automated ultrasonic testing--capabilities, limitations and methods

International Nuclear Information System (INIS)

Beller, L.S.; Mikesell, C.R.

1977-01-01

The requirements for precision and reproducibility of ultrasonic testing during inservice inspection of nuclear reactors are both quantitatively and qualitatively more severe than most current practice in the field can provide. An automated ultrasonic testing (AUT) system, which provides a significant advancement in field examination capabilities, is described. Properties of the system, its application, and typical results are discussed

Angular and magnetic field dependences of critical current in irradiated YBaCuO single crystals

International Nuclear Information System (INIS)

Petrusenko, Yu.

2010-01-01

The investigation of mechanisms responsible for the current-carrying capability of irradiated high-temperature superconductors (HTSC) was realized. For the purpose, experiments were made to investigate the effect of point defects generated by high-energy electron irradiation on the critical temperature and the critical current in high-Tc superconducting single crystals YBa 2 Cu 3 O 7-x . The transport current density measured in HTSC single crystals YBa 2 Cu 3 O 7-x by the dc-method was found to exceed 80000 A/cm 2 . The experiments have demonstrated a more than 30-fold increase in the critical current density in single crystals irradiated with 2.5 MeV electrons to a dose of 3·10 18 el/cm 2 . Detailed studies were made into the anisotropy of critical current and the dependence of critical current on the external magnetic field strength in irradiated single crystals. A high efficiency of point defects as centers of magnetic vortex pinning in HTSC single crystals was first demonstrated.

Nuclear Research and Development Capabilities Needed to Support Future Growth

Energy Technology Data Exchange (ETDEWEB)

Wham, Robert M. [ORNL, P.O. Box 2008, Oak Ridge, TN 37831-6154 (United States); Kearns, Paul [Battelle Memorial Institute (United States); Marston, Ted [Marston Consulting (United States)

2009-06-15

The energy crisis looming before the United States can be resolved only by an approach that integrates a 'portfolio' of options. Nuclear energy, already an important element in the portfolio, should play an even more significant role in the future as the U.S. strives to attain energy independence and reduce carbon emissions. The DOE Office of Nuclear Energy asked Battelle Memorial Institute to obtain input from the commercial power generation industry on industry's vision for nuclear energy over the next 30-50 years. With this input, Battelle was asked to generate a set of research and development capabilities necessary for DOE to support the anticipated growth in nuclear power generation. This presentation, based on the report generated for the Office of Nuclear Energy, identifies the current and future nuclear research and development capabilities required to make this happen. The capabilities support: (1) continued, safe operation of the current fleet of nuclear plants; (2) the availability of a well qualified and trained workforce; (3) demonstration of the next generation nuclear plants; (4) development of a sustainable fuel cycle; (5) advanced technologies for maximizing resource utilization and minimization of waste and (6) advanced modeling and simulation for rapid and reliable development and deployment of new nuclear technologies. In order to assure these capabilities are made available, a Strategic Nuclear Energy Capability Initiative is proposed to provide the required resources during this critical period of time. (authors)

Managing Capabilities for Supply Chain Resilience Through it Integration

Directory of Open Access Journals (Sweden)

Gružauskas Valentas

2017-08-01

Full Text Available The trend for e-commerce, estimated population size to 11 billion by 2050, and an increase in urbanization level to 70 % is requiring to re-think the current supply chain. These trends changed the distribution process: delivery distances are decreasing, the product variety is increasing, and more products are being sold in smaller quantities. Therefore, the concept of supply chain resilience has gained more recognition in recent years. The scientific literature analysis conducted by the authors indicate several capabilities that influence supply chain resilience. Collaboration, flexibility, redundancy and integration are the most influential capabilities to supply chain resilience. However, the authors identify that the combination of these capabilities to supply chain resilience is under researched. The authors indicate that by combining these capabilities with the upcoming technologies of industry 4.0, supply chain resilience can be achieved. In the future, the authors are planning to conduct further research to identify the influence of these capabilities to supply chain resilience, to quantify supply chain resilience, and to provide further practices of industry 4.0 concept usage for supply chain resilience.

Application of heterogeneous multiple camera system with panoramic capabilities in a harbor environment

NARCIS (Netherlands)

Schwering, P.B.W.; Lensen, H.A.; Broek, S.P. van den; Hollander, R.J.M. den; Mark, W. van der; Bouma, H.; Kemp, R.A.W.

2009-01-01

In a harbor environment threats like explosives-packed rubber boats, mine-carrying swimmers and divers must be detected in an early stage. This paper describes the integration and use of a heterogeneous multiple camera system with panoramic observation capabilities for detecting these small vessels

Bubble Radiation Detection: Current and Future Capability

International Nuclear Information System (INIS)

Peurrung, A.J.; Craig, R.A.

1999-01-01

Despite a number of noteworthy achievements in other fields, superheated droplet detectors (SDDs) and bubble chambers (BCs) have not been used for nuclear nonproliferation and arms control. This report examines these two radiation-detection technologies in detail and answers the question of how they can be or should be ''adapted'' for use in national security applications. These technologies involve closely related approaches to radiation detection in which an energetic charged particle deposits sufficient energy to initiate the process of bubble nucleation in a superheated fluid. These detectors offer complete gamma-ray insensitivity when used to detect neutrons. They also provide controllable neutron-energy thresholds and excellent position resolution. SDDs are extraordinarily simple and inexpensive. BCs offer the promise of very high efficiency (∼75%). A notable drawback for both technologies is temperature sensitivity. As a result of this problem, the temperature must be controlled whenever high accuracy is required, or harsh environmental conditions are encountered. The primary findings of this work are listed and briefly summarized below: (1) SDDs are ready to function as electronics-free neutron detectors on demand for arms-control applications. The elimination of electronics at the weapon's location greatly eases the negotiability of radiation-detection technologies in general. (2) As a result of their high efficiency and sharp energy threshold, current BCs are almost ready for use in the development of a next-generation active assay system. Development of an instrument based on appropriately safe materials is warranted. (3) Both kinds of bubble detectors are ready for use whenever very high gamma-ray fields must be confronted. Spent fuel MPC and A is a good example where this need presents itself. (4) Both kinds of bubble detectors have the potential to function as low-cost replacements for conventional neutron detectors such as 3 He tubes. For SDDs

Dynamic capabilities and innovation capabilities: The case of the ‘Innovation Clinic’

Directory of Open Access Journals (Sweden)

Fred Strønen

2017-01-01

Full Text Available In this explorative study, we investigate the relationship between dynamic capabilities and innovation capabilities. Dynamic capabilities are at the core of strategic management in terms of how firms can ensure adaptation to changing environments over time. Our paper follows two paths of argumentation. First, we review and discuss some major contributions to the theories on ordinary capabilities, dynamic capabilities, and innovation capabilities. We seek to identify different understandings of the concepts in question, in order to clarify the distinctions and relationships between dynamic capabilities and innovation capabilities. Second, we present a case study of the ’Innovation Clinic’ at a major university hospital, including four innovation projects. We use this case study to explore and discuss how dynamic capabilities can be extended, as well as to what extent innovation capabilities can be said to be dynamic. In our conclusion, we discuss the conditions for nurturing ‘dynamic innovation capabilities’ in organizations.

Transportation capabilities study of DOE-owned spent nuclear fuel

Energy Technology Data Exchange (ETDEWEB)

Clark, G.L.; Johnson, R.A.; Smith, R.W. [Packaging Technology, Inc., Tacoma, WA (United States); Abbott, D.G.; Tyacke, M.J. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

1994-10-01

This study evaluates current capabilities for transporting spent nuclear fuel owned by the US Department of Energy. Currently licensed irradiated fuel shipping packages that have the potential for shipping the spent nuclear fuel are identified and then matched against the various spent nuclear fuel types. Also included are the results of a limited investigation into other certified packages and new packages currently under development. This study is intended to support top-level planning for the disposition of the Department of Energy`s spent nuclear fuel inventory.

Capability ethics

OpenAIRE

Robeyns, Ingrid

2012-01-01

textabstractThe capability approach is one of the most recent additions to the landscape of normative theories in ethics and political philosophy. Yet in its present stage of development, the capability approach is not a full-blown normative theory, in contrast to utilitarianism, deontological theories, virtue ethics, or pragmatism. As I will argue in this chapter, at present the core of the capability approach is an account of value, which together with some other (more minor) normative comm...

Analysis of Carrying Capacity of Agro-Ecosystem Coconut-Cattle in South Minahasa Regency

Directory of Open Access Journals (Sweden)

AHS Salendu

2012-01-01

Full Text Available Abstract. Coconut plantation is very dominating in South Minahasa regency seen from its production of 49,907.33 tons in 2010. The land under coconut trees can be used for food crops or forage. The waste from food crops is the source of animal feed, while the livestock’s manure is used to improve soil fertility under coconut tree. The research objective was to analyse the carrying capacity of the agro-ecosystem of coconut-cattle. Regency and district were determined purposively. A total of 86 farmers as respondents were determined based on the ownership of at least 2 cattle and cattle selling experience. Data were analyzed using effective potential of livestock development and land capability index (IDD. The result showed that the maximum potential of land resources (PMSL was 30,872.94 animal unit (AU. The capacity increase in cattle population based on the soil resources was 18,208.94 AU. The maximum potential based on farmer house holds was 127,023.00 AU. The value of land capability index was 2.14. The conclusion was South Minahasa Regency was still potential for cattle development regarding land resources or workforce potentials. Development of cattle can be integrated with the coconut to maintain and improve agro-ecosystem sustainability of coconut plantation. Keywords: cattle, carrying capacity, agro-ecosystem, coconut Animal Production 14(1:56-62, January 2012

Reframing Inclusive Education: Educational Equality as Capability Equality

Science.gov (United States)

Terzi, Lorella

2014-01-01

In this paper, I argue that rethinking questions of inclusive education in the light of the value of educational equality--specifically conceived as capability equality, or genuine opportunities to achieve educational functionings--adds some important insights to the current debate on inclusive education. First, it provides a cohesive value…

Exploration Medical Capability - Technology Watch

Science.gov (United States)

Krihak, Michael; Watkins, Sharmila; Barr, Yael; Barsten, Kristina; Fung, Paul; Baumann, David

2011-01-01

The objectives of the Technology Watch process are to identify emerging, high-impact technologies that augment current ExMC development efforts, and to work with academia, industry, and other government agencies to accelerate the development of medical care and research capabilities for the mitigation of potential health issues that could occur during space exploration missions. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion. Such collaborations also further NASA s goal to provide a safe and healthy environment for human exploration. The Tech Watch project addresses requirements and capabilities identified by knowledge and technology gaps that are derived from a discrete set of medical conditions that are most likely to occur on exploration missions. These gaps are addressed through technology readiness level assessments, market surveys, collaborations and distributed innovation opportunities. Ultimately, these gaps need to be closed with respect to exploration missions, and may be achieved through technology development projects. Information management is a key aspect to this process where Tech Watch related meetings, research articles, collaborations and partnerships are tracked by the HRP s Exploration Medical Capabilities (ExMC) Element. In 2011, ExMC will be introducing the Tech Watch external website and evidence wiki that will provide access to ExMC technology and knowledge gaps, technology needs and requirements documents.

Gossiping Capabilities

DEFF Research Database (Denmark)

Mogensen, Martin; Frey, Davide; Guerraoui, Rachid

Gossip-based protocols are now acknowledged as a sound basis to implement collaborative high-bandwidth content dissemination: content location is disseminated through gossip, the actual contents being subsequently pulled. In this paper, we present HEAP, HEterogeneity Aware gossip Protocol, where...... nodes dynamically adjust their contribution to gossip dissemination according to their capabilities. Using a continuous, itself gossip-based, approximation of relative capabilities, HEAP dynamically leverages the most capable nodes by (a) increasing their fanouts (while decreasing by the same proportion...... declare a high capability in order to augment their perceived quality without contributing accordingly. We evaluate HEAP in the context of a video streaming application on a 236 PlanetLab nodes testbed. Our results shows that HEAP improves the quality of the streaming by 25% over a standard gossip...

Strength capability while kneeling.

Science.gov (United States)

Haslegrave, C M; Tracy, M F; Corlett, E N

1997-12-01

Work sometimes has to be carried out kneeling, particularly where jobs are performed in confined spaces as is common for miners, aircraft baggage handlers and maintenance workers. In order to assess the risks in performing forceful tasks under such conditions, data is needed on strength capabilities of kneeling subjects. A study was undertaken to measure isometric strength in single-handed exertions for male subjects and to investigate the effects on this of task layout factors (direction of force exertion, reach distance, height of the workpiece and orientation relative to the subject's sagittal plane). The data has been tabulated to show the degree to which strength may be reduced in different situations and analysis of the task factors showed their influence to be complex with direction of exertion and reach distance having the greatest effect. The results also suggest that exertions are weaker when subjects are kneeling on two knees than when kneeling on one knee, although this needs to be confirmed by direct experimental comparison.

Influence of Current Transformer Saturation on Operation of Current Protection

Directory of Open Access Journals (Sweden)

F. A. Romaniouk

2010-01-01

Full Text Available An analysis of the influence of instrument current transformer errors on operation of current protection of power supply diagram elements has been carried out in the paper. The paper shows the influence of an aperiodic component of transient current and secondary load on current  transformer errors.Peculiar operational features of measuring elements of electromechanical and microprocessor current protection with their joint operation with electromagnetic current transformers have been analyzed in the paper.

Capabilities and diagnostics of the Sandia Pelletron-raster system

International Nuclear Information System (INIS)

Buckalew, W.H.; Lockwood, G.J.; Luker, S.M.; Ruggles, L.E.; Wyant, F.J.

1984-07-01

The radiation capabilities of the PELLETRON Electron Beam Accelerator have been expanded to include a controllable, variable dimension, beam diffusion option. This rastered beam option has been studied in detail. Beam characteristics have been determined as a function of incident electron beam energy, current, and deflection system parameters. The beam diagnostics required to define any given diffuse beam pattern are accurate and predictable. Recently, utility of this added PELLETRON capability was demonstrated by simulating the effects of complex nuclear reactor accident electron environments on electrical insulation materials similar to those used in nuclear power plants

Materials Capability Review Los Alamos National Laboratory April 29-May 2, 2012

Energy Technology Data Exchange (ETDEWEB)

Taylor, Antoinette J [Los Alamos National Laboratory

2012-04-20

Los Alamos National Laboratory (LANL) uses Capability Reviews to assess the quality and institutional integration of science, technology and engineering (STE) and to advise Laboratory Management on the current and future health of LANL STE. The capabilities are deliberately chosen to be crosscutting over the Laboratory and therefore will include experimental, theoretical and simulation disciplines from multiple line organizations. Capability Reviews are designed to provide a more holistic view of the STE quality, integration to achieve mission requirements, and mission relevance. The scope of these capabilities necessitate that there will be significant overlap in technical areas covered by capability reviews (e.g., materials research and weapons science and engineering). In addition, LANL staff may be reviewed in different capability reviews because of their varied assignments and expertise. The principal product of the Capability Review is the report that includes the review committee's assessments, recommendations, and recommendations for STE.

Fusion Materials Irradiation Test Facility: experimental capabilities and test matrix

International Nuclear Information System (INIS)

Opperman, E.K.

1982-01-01

This report describes the experimental capabilities of the Fusion Materials Irradiation Test Facility (FMIT) and reference material specimen test matrices. The description of the experimental capabilities and the test matrices has been updated to match the current single test cell facility ad assessed experimenter needs. Sufficient detail has been provided so that the user can plan irradiation experiments and conceptual hardware. The types of experiments, irradiation environment and support services that will be available in FMIT are discussed

Enhanced Monte-Carlo-Linked Depletion Capabilities in MCNPX

International Nuclear Information System (INIS)

Fensin, Michael L.; Hendricks, John S.; Anghaie, Samim

2006-01-01

As advanced reactor concepts challenge the accuracy of current modeling technologies, a higher-fidelity depletion calculation is necessary to model time-dependent core reactivity properly for accurate cycle length and safety margin determinations. The recent integration of CINDER90 into the MCNPX Monte Carlo radiation transport code provides a completely self-contained Monte-Carlo-linked depletion capability. Two advances have been made in the latest MCNPX capability based on problems observed in pre-released versions: continuous energy collision density tracking and proper fission yield selection. Pre-released versions of the MCNPX depletion code calculated the reaction rates for (n,2n), (n,3n), (n,p), (n,a), and (n,?) by matching the MCNPX steady-state 63-group flux with 63-group cross sections inherent in the CINDER90 library and then collapsing to one-group collision densities for the depletion calculation. This procedure led to inaccuracies due to the miscalculation of the reaction rates resulting from the collapsed multi-group approach. The current version of MCNPX eliminates this problem by using collapsed one-group collision densities generated from continuous energy reaction rates determined during the MCNPX steady-state calculation. MCNPX also now explicitly determines the proper fission yield to be used by the CINDER90 code for the depletion calculation. The CINDER90 code offers a thermal, fast, and high-energy fission yield for each fissile isotope contained in the CINDER90 data file. MCNPX determines which fission yield to use for a specified problem by calculating the integral fission rate for the defined energy boundaries (thermal, fast, and high energy), determining which energy range contains the majority of fissions, and then selecting the appropriate fission yield for the energy range containing the majority of fissions. The MCNPX depletion capability enables complete, relatively easy-to-use depletion calculations in a single Monte Carlo code

Very low cost stand-off suicide bomber detection system using human gait analysis to screen potential bomb carrying individuals

Science.gov (United States)

Greneker, Gene, III

2005-05-01

Individuals who carry bombs on their bodies and detonate those bombs in public places are a security problem. There is belief that suicide bombings currently used in the mid-east may spread to the United States if the organized terrorist groups operating in the United States are not identified and the cell members arrested. While bombs in vehicles are the primary method currently used to spread terror in Iraq, U. S. warfighters are starting to face suicide bombers. This may become more of the situation if a stand-off detection capability is developed for the vehicle bomb case. This paper presents a concept, that if developed and commercialized, could provide an inexpensive suicide bomber screening system that could be used to screen individuals approaching a checkpoint while the individual is still 500 to 1,000 feet from the checkpoint. The proposed system measures both the radar cross-section of the individual and the radar derived gait characteristics that are associated with individuals carrying a bomb on their body. GTRI researchers propose to use human gait characteristics, as detected by radar, to determine if a human subject who is carrying no visible load on the body is actually carrying a concealed load under their clothes. The use of radar gait as a metric for the detection (as opposed to a video system) of a suicide bomber is being proposed because detection of gait characteristics are thought to be less sensitive to where the bomb is located on the body, lighting conditions, and the fact that the legs may be shrouded in a robe. The detection of a bomb using radar gait analysis may also prove to be less sensitive to changing tactics regarding where the bomb is placed on the body. An inert suicide bomb vest was constructed using water pipes to simulate the explosive devices. Wiring was added to simulated detonators. The vest weighs approximately 35 pounds. Radar data was taken on the volunteer subject wearing the vest that simulated the suicide bomb. This

Rights, goals, and capabilities

NARCIS (Netherlands)

van Hees, M.V.B.P.M

This article analyses the relationship between rights and capabilities in order to get a better grasp of the kind of consequentialism that the capability theory represents. Capability rights have been defined as rights that have a capability as their object (rights to capabilities). Such a

Neurocognitive capabilities modulate the integration of evidence in schizophrenia

NARCIS (Netherlands)

Eifler, Sarah; Rausch, Franziska; Schirmbeck, Frederike; Veckenstedt, Ruth; Englisch, Susanne; Meyer-Lindenberg, Andreas; Kirsch, Peter; Zink, Mathias

2014-01-01

Previous studies have demonstrated a cognitive bias in the integration of disconfirmatory evidence (BADE) in patients with schizophrenia. This bias has been associated with delusions. So far, it is unclear how the integration of evidence is associated with neurocognitive capabilities. In the current

Assessment of Mobile Accident Response Capability

International Nuclear Information System (INIS)

1983-03-01

This report presents the results of a DOE-sponsored assessment of nuclear accident response resources. It identifies the mobile resources that could be required to respond to different types of nuclear accidents including major ones like TMI-2, identifies the resources currently available and makes recommendations for the design and construction of additional mobile accident response resources to supplement those already in existence. This project is referred to as the Mobile Accident Response Capability (MARC) program

Improving Coastal Ocean Color Validation Capabilities through Application of Inherent Optical Properties (IOPs)

Science.gov (United States)

Mannino, Antonio

2008-01-01

Understanding how the different components of seawater alter the path of incident sunlight through scattering and absorption is essential to using remotely sensed ocean color observations effectively. This is particularly apropos in coastal waters where the different optically significant components (phytoplankton, detrital material, inorganic minerals, etc.) vary widely in concentration, often independently from one another. Inherent Optical Properties (IOPs) form the link between these biogeochemical constituents and the Apparent Optical Properties (AOPs). understanding this interrelationship is at the heart of successfully carrying out inversions of satellite-measured radiance to biogeochemical properties. While sufficient covariation of seawater constituents in case I waters typically allows empirical algorithms connecting AOPs and biogeochemical parameters to behave well, these empirical algorithms normally do not hold for case I1 regimes (Carder et al. 2003). Validation in the context of ocean color remote sensing refers to in-situ measurements used to verify or characterize algorithm products or any assumption used as input to an algorithm. In this project, validation capabilities are considered those measurement capabilities, techniques, methods, models, etc. that allow effective validation. Enhancing current validation capabilities by incorporating state-of-the-art IOP measurements and optical models is the purpose of this work. Involved in this pursuit is improving core IOP measurement capabilities (spectral, angular, spatio-temporal resolutions), improving our understanding of the behavior of analytical AOP-IOP approximations in complex coastal waters, and improving the spatial and temporal resolution of biogeochemical data for validation by applying biogeochemical-IOP inversion models so that these parameters can be computed from real-time IOP sensors with high sampling rates. Research cruises supported by this project provides for collection and

Knowledge capabilities for sustainable development in global classrooms - local challenges

Directory of Open Access Journals (Sweden)

Elise Anderberg

2011-01-01

Full Text Available The Young Masters Programme provides young people around the worldwith a net–based global–local learning environment for sustainable development. The present study investigates certain aspects of the implementation of this programme in the secondary schools of a Swedish municipality, in the context of the Lund Calling project. The research focuses on critical abilities to act globally, referred to as “knowledge capabilities”, and how they relate to the implementation process of initiating global learning for sustainabledevelopment (GLSD. A phenomenographic approach and semi–structuredinterviews were used in the investigation of the experiences of secondary school pupils, teachers and headmasters who participated in the project. Participants’ experiences of the changes carried out are described in relation to examples of knowledge capabilities needed for GLSD. Critical knowledge capabilities found to have been developed through the implementation were: to take command, and to collaborate. Critical knowledge capabilities perceived asnecessary, but not developed through the programme were: to be prepared, to act in a transdisciplinary manner, and to lead for a holistic understanding.

Treating the Capability for Suicide: A Vital and Understudied Frontier in Suicide Prevention.

Science.gov (United States)

Anestis, Michael D; Law, Keyne C; Jin, Hyejin; Houtsma, Claire; Khazem, Lauren R; Assavedo, Brittney L

2017-10-01

Current efforts at suicide prevention center largely on reducing suicidal desire among individuals hospitalized for suicidality or being treated for related psychopathology. Such efforts have yielded evidence-based treatments, and yet the national suicide rate has continued to climb. We propose that this disconnect is heavily influenced by an unmet need to consider population-level interventions aimed at reducing the capability for suicide. Drawing on lessons learned from other public health phenomena that have seen drastic declines in frequency in recent decades (HIV, lung cancer, motor vehicle accidents), we propose that current suicidality treatment efforts trail current suicidality theories in their lack of focus on the extent to which individuals thinking about suicide are capable of transitioning from ideation to attempt. We summarize extant evidence for specific capability-centered approaches (e.g., means safety) and propose other options for improving our ability to address this largely overlooked variable. We also note that population-level approaches in this regard would represent an important opportunity to decrease risk in individuals who either lack access to evidence-based care or underreport suicidal ideation, as a reduced capability for suicide would theoretically diminish the potency of suicidal desire and, in this sense, lower the odds of a transition from ideation to attempt. © 2016 The American Association of Suicidology.

Building Visual Artists’ Resilience Capabilities: Current Educator Strategies and Methods

Directory of Open Access Journals (Sweden)

Eileen Maree Siddins

2016-07-01

Full Text Available Enrolments in higher education programs in the creative and performing arts are increasing in many countries. Yet graduates of these degrees, who enter the broad sector known as the creative industries, face particular challenges in terms of securing long-term and sustainable employment. In addition, creative and performing artists face a range of mental challenges, caused by such factors as: the solitary nature of much creative practice, critical feedback by audiences and gatekeepers, or the general pressures associated with maintaining artistic relevance or integrity. The concepts of resilience and professional wellbeing are therefore highly relevant to those who pursue a career in creative industries, and while there has been an emerging body of work in this area, to date it has focussed on the performing arts area (e.g. music, theatre. Hence, in order to expand knowledge relevant to resilience and artists, this paper sets out to explore the extent to which current educators in the Australian context specifically address these issues within higher visual arts curricula; specifically the areas of illustration, design, film and photography. This was achieved via interviews with seventeen current academics working in these areas. The findings propose that higher education providers of programs in the visual arts consider placing a stronger emphasis on the embedded development of resilience and professional wellbeing capacities.

A simulation of a multifilamentary wire carrying a transport current in an AC applied field

International Nuclear Information System (INIS)

Rem, P.C.; Hartmann, R.A.; Dijkstra, D.; Van Beckum, F.P.H.; Van de Klundert, L.J.M.

1986-01-01

The problem of calculating the current distribution in a multi-filamentary wire subjected to a time-dependent field becomes difficult as soon as the non-linearity due to the saturation of layers of filaments can be neglected no more. Such a problem can be solved approximately if the shape of the boundaries between unsaturated regions can be prescribed on the basis of general considerations such as symmetry arguments. For cases involving both a transport current and an applied field, however, little is known about the boundaries and their time-dependence behaviour. For such cases a brute force numerical calculation may provide an answer. The results presented below were calculated for a combination of DC transport current and AC applied field

Capability ethics

NARCIS (Netherlands)

I.A.M. Robeyns (Ingrid)

2012-01-01

textabstractThe capability approach is one of the most recent additions to the landscape of normative theories in ethics and political philosophy. Yet in its present stage of development, the capability approach is not a full-blown normative theory, in contrast to utilitarianism, deontological

Critical current, pinning and resistive state of superconducting single-crystal niobium with different types of defect structure

International Nuclear Information System (INIS)

Sokolenko, V.I.; Starodubov, Ya.D.

2005-01-01

Critical current pinning and resistive state of single crystal niobium of texture orientation are studied for different structural states obtained by rolling at 20 K by 42% and polishing the surface layers. It is found that the heterogeneous structures typical of the strained sample even after its thinning down to approx 10% display a lower current-carrying capability due to an increase of the thermomagnetic instability within the fragmented structure sections in the near-surface layers. For a homogeneous defect structure of the sample core with the density of equilibrium distributed dislocations of 1.3 centre dot 10 11 cm -2 , a correlation between the normal current density and the critical current density in the resistive state is found, in agreement with the concepts of flux creep due to the scatter of local values of J c

The SCEC Community Modeling Environment (SCEC/CME) - An Overview of its Architecture and Current Capabilities

Science.gov (United States)

Maechling, P. J.; Jordan, T. H.; Minster, B.; Moore, R.; Kesselman, C.; SCEC ITR Collaboration

2004-12-01

these models. In some cases, the CME system also provides alternatives to the SCEC community models. The CME system hosts a collection of community geophysical software codes. These codes include seismic hazard analysis (SHA) programs developed by the SCEC/USGS OpenSHA group. Also, the CME system hosts anelastic wave propagation codes including Kim Olsen's Finite Difference code and Carnegie Mellon's Hercules Finite Element tool chain. The CME system can execute a workflow, that is, a series of geophysical computations using the output of one processing step as the input to a subsequent step. Our workflow capability utilizes grid-based computing software that can submit calculations to a pool of computing resources as well as data management tools that help us maintain an association between data files and metadata descriptions of those files. The CME system maintains, and provides access to, a collection of valuable geophysical data sets. The current CME Digital Library holdings include a collection of 60 ground motion simulation results calculated by a SCEC/PEER working group and a collection of Greens Functions calculated for 33 TriNet broadband receiver sites in the Los Angeles area.

Current lead thermal analysis code 'CURRENT'

International Nuclear Information System (INIS)

Yamaguchi, Masahito; Tada, Eisuke; Shimamoto, Susumu; Hata, Kenichiro.

1985-08-01

Large gas-cooled current lead with the capacity more than 30 kA and 22 kV is required for superconducting toroidal and poloidal coils for fusion application. The current lead is used to carry electrical current from the power supply system at room temperature to the superconducting coil at 4 K. Accordingly, the thermal performance of the current lead is significantly important to determine the heat load requirements of the coil system at 4 K. Japan Atomic Energy Research Institute (JAERI) has being developed the large gas-cooled current leads with the optimum condition in which the heat load is around 1 W per 1 kA at 4 K. In order to design the current lead with the optimum thermal performances, JAERI developed thermal analysis code named as ''CURRENT'' which can theoretically calculate the optimum geometric shape and cooling conditions of the current lead. The basic equations and the instruction manual of the analysis code are described in this report. (author)

Electro-Thermal-Mechanical Simulation Capability Final Report

International Nuclear Information System (INIS)

White, D

2008-01-01

This is the Final Report for LDRD 04-ERD-086, 'Electro-Thermal-Mechanical Simulation Capability'. The accomplishments are well documented in five peer-reviewed publications and six conference presentations and hence will not be detailed here. The purpose of this LDRD was to research and develop numerical algorithms for three-dimensional (3D) Electro-Thermal-Mechanical simulations. LLNL has long been a world leader in the area of computational mechanics, and recently several mechanics codes have become 'multiphysics' codes with the addition of fluid dynamics, heat transfer, and chemistry. However, these multiphysics codes do not incorporate the electromagnetics that is required for a coupled Electro-Thermal-Mechanical (ETM) simulation. There are numerous applications for an ETM simulation capability, such as explosively-driven magnetic flux compressors, electromagnetic launchers, inductive heating and mixing of metals, and MEMS. A robust ETM simulation capability will enable LLNL physicists and engineers to better support current DOE programs, and will prepare LLNL for some very exciting long-term DoD opportunities. We define a coupled Electro-Thermal-Mechanical (ETM) simulation as a simulation that solves, in a self-consistent manner, the equations of electromagnetics (primarily statics and diffusion), heat transfer (primarily conduction), and non-linear mechanics (elastic-plastic deformation, and contact with friction). There is no existing parallel 3D code for simulating ETM systems at LLNL or elsewhere. While there are numerous magnetohydrodynamic codes, these codes are designed for astrophysics, magnetic fusion energy, laser-plasma interaction, etc. and do not attempt to accurately model electromagnetically driven solid mechanics. This project responds to the Engineering R and D Focus Areas of Simulation and Energy Manipulation, and addresses the specific problem of Electro-Thermal-Mechanical simulation for design and analysis of energy manipulation systems

Dynamic Capabilities

DEFF Research Database (Denmark)

Grünbaum, Niels Nolsøe; Stenger, Marianne

2013-01-01

The findings reveal a positive relationship between dynamic capabilities and innovation performance in the case enterprises, as we would expect. It was, however, not possible to establish a positive relationship between innovation performance and profitability. Nor was there any positive...... relationship between dynamic capabilities and profitability....

Electron currents associated with an auroral band

International Nuclear Information System (INIS)

Spiger, R.J.; Anderson, H.R.

1975-01-01

Measurements of electron pitch angle distributions and energy spectra over a broad auroral band were used to calculate net electric current carried by auroral electrons in the vicinity of the band. The particle energy spectrometers were carried by a Nike-Tomahawk rocket launched from Poker Flat, Alaska, at 0722 UT on February 25, 1972. Data are presented which indicate the existence of upward field-aligned currents of electrons in the energy range 0.5-20 keV. The spatial relationship of these currents to visual structure of the auroral arc and the characteristics of the electrons carrying the currents are discussed

Electron currents associated with an auroral band

Science.gov (United States)

Spiger, R. J.; Anderson, H. R.

1975-01-01

Measurements of electron pitch angle distributions and energy spectra over a broad auroral band were used to calculate net electric current carried by auroral electrons in the vicinity of the band. The particle energy spectrometers were carried by a Nike-Tomahawk rocket launched from Poker Flat, Alaska, at 0722 UT on February 25, 1972. Data are presented which indicate the existence of upward field-aligned currents of electrons in the energy range 0.5-20 keV. The spatial relationship of these currents to visual structure of the auroral arc and the characteristics of the electrons carrying the currents are discussed.

Time dependent variation of carrying capacity of prestressed precast beam

Science.gov (United States)

Le, Tuan D.; Konečný, Petr; Matečková, Pavlína

2018-04-01

The article deals with the evaluation of the precast concrete element time dependent carrying capacity. The variation of the resistance is inherited property of laboratory as well as in-situ members. Thus the specification of highest, yet possible, laboratory sample resistance is important with respect to evaluation of laboratory experiments based on the test machine loading capabilities. The ultimate capacity is evaluated through the bending moment resistance of a simply supported prestressed concrete beam. The probabilistic assessment is applied. Scatter of random variables of compressive strength of concrete and effective height of the cross section is considered. Monte Carlo simulation technique is used to investigate the performance of the cross section of the beam with changes of tendons’ positions and compressive strength of concrete.

Form and Function of Carrying Tools in Traditional and Contemporary Culture

Directory of Open Access Journals (Sweden)

Hendriana Werdhaningsih

2009-07-01

Full Text Available The Javanese Traditional Carrying Tools are categorized into two kinds based used of materials: anyaman made of woven bamboo or rattan and the other was made of cloth. The Traditional Javanese Carrying Tools that were made of bamboo/ rattan is actually a kind of container with different shapes. The types of goods that were brought was related to the shapes of the containers, demonstrate the type of interactions between the carrier and the goods. The Traditional Carrying Tools made of cloth have the flexibility in terms of being the containers of the carried goods. Selendang is used to carry goods, including the bamboo/ rattan containers and to carry babies. It can be used rumpled and straightened depends on the technical needs of carrying tools preferred by the user. In contemporary culture, the form and design of carrying tools more less construct by fashion and trends besides those practical used. Some product are being 'classic', some other are being 'fad'. Both products, traditional and contemporary have their own style, uniqueness, and own context. Analyzing both in design point of view is important as evaluation process, to finding new problems that will be starting point to create new products. Indonesia is well known for its abundant richness in traditions, which include the culture, the art, and the traditional products. Such treasure of traditions can inspire the development and invention of various kinds of artwork and current products.

Reactivity Insertion Accident (RIA) Capability Status in the BISON Fuel Performance Code

Energy Technology Data Exchange (ETDEWEB)

Williamson, Richard L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Folsom, Charles Pearson [Idaho National Lab. (INL), Idaho Falls, ID (United States); Pastore, Giovanni [Idaho National Lab. (INL), Idaho Falls, ID (United States); Veeraraghavan, Swetha [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-05-01

One of the Challenge Problems being considered within CASL relates to modelling and simulation of Light Water Reactor LWR) fuel under Reactivity Insertion Accident (RIA) conditions. BISON is the fuel performance code used within CASL for LWR fuel under both normal operating and accident conditions, and thus must be capable of addressing the RIA challenge problem. This report outlines required BISON capabilities for RIAs and describes the current status of the code. Information on recent accident capability enhancements, application of BISON to a RIA benchmark exercise, and plans for validation to RIA behavior are included.

PHISICS multi-group transport neutronic capabilities for RELAP5

Energy Technology Data Exchange (ETDEWEB)

Epiney, A.; Rabiti, C.; Alfonsi, A.; Wang, Y.; Cogliati, J.; Strydom, G. [Idaho National Laboratory (INL), 2525 N. Fremont Ave., Idaho Falls, ID 83402 (United States)

2012-07-01

PHISICS is a neutronic code system currently under development at INL. Its goal is to provide state of the art simulation capability to reactor designers. This paper reports on the effort of coupling this package to the thermal hydraulic system code RELAP5. This will enable full prismatic core and system modeling and the possibility to model coupled (thermal-hydraulics and neutronics) problems with more options for 3D neutron kinetics, compared to the existing diffusion theory neutron kinetics module in RELAP5 (NESTLE). The paper describes the capabilities of the coupling and illustrates them with a set of sample problems. (authors)

Digitization Projects Carried out by the Mathematical Institute Belgrade

OpenAIRE

Ognjanovič, Zoran; Mijajlovič, Žarco

2004-01-01

In this paper some current digitization projects carried out by the Mathematical Institute of Serbian Academy of Science and Arts Belgrade and the Faculty of Mathematics Belgrade are described. The projects concern developing of a virtual library of retro-digitized books and an Internet data base and presentation of electronic editions of some leading Serbian journals in science and arts, and the work on the South-Eastern European Digitization Initiative (SEEDI).

Capabilities and Incapabilities of the Capabilities Approach to Health Justice.

Science.gov (United States)

Selgelid, Michael J

2016-01-01

This first part of this article critiques Sridhar Venkatapuram's conception of health as a capability. It argues that Venkatapuram relies on the problematic concept of dignity, implies that those who are unhealthy lack lives worthy of dignity (which seems politically incorrect), sets a low bar for health, appeals to metaphysically problematic thresholds, fails to draw clear connections between appealed-to capabilities and health, and downplays the importance/relevance of health functioning. It concludes by questioning whether justice entitlements should pertain to the capability for health versus health achievements, challenging Venkatapuram's claims about the strength of health entitlements, and demonstrating that the capabilities approach is unnecessary to address social determinants of health. © 2016 John Wiley & Sons Ltd.

Introducing carrying capacity-based normalisation in LCA: framework and development of references at midpoint level

DEFF Research Database (Denmark)

Bjørn, Anders; Hauschild, Michael Zwicky

2015-01-01

carrying capacity-based normalisation references. The purpose of this article is to present a framework for normalisation against carrying capacity-based references and to develop average normalisation references (NR) for Europe and the world for all those midpoint impact categories commonly included....... A literature review was carried out to identify scientifically sound thresholds for each impact category. Carrying capacities were then calculated from these thresholds and expressed in metrics identical to midpoint indicators giving priority to those recommended by ILCD. NR was expressed as the carrying...... ozone formation and soil quality were found to exceed carrying capacities several times.The developed carrying capacity-based normalisation references offer relevant supplementary reference information to the currently applied references based on society’s background interventions by supporting...

IntelliTable: Inclusively-Designed Furniture with Robotic Capabilities.

Science.gov (United States)

Prescott, Tony J; Conran, Sebastian; Mitchinson, Ben; Cudd, Peter

2017-01-01

IntelliTable is a new proof-of-principle assistive technology system with robotic capabilities in the form of an elegant universal cantilever table able to move around by itself, or under user control. We describe the design and current capabilities of the table and the human-centered design methodology used in its development and initial evaluation. The IntelliTable study has delivered robotic platform programmed by a smartphone that can navigate around a typical home or care environment, avoiding obstacles, and positioning itself at the user's command. It can also be configured to navigate itself to pre-ordained places positions within an environment using ceiling tracking, responsive optical guidance and object-based sonar navigation.

Assessment of CFD capability for prediction of hypersonic shock interactions

Science.gov (United States)

Knight, Doyle; Longo, José; Drikakis, Dimitris; Gaitonde, Datta; Lani, Andrea; Nompelis, Ioannis; Reimann, Bodo; Walpot, Louis

2012-01-01

The aerothermodynamic loadings associated with shock wave boundary layer interactions (shock interactions) must be carefully considered in the design of hypersonic air vehicles. The capability of Computational Fluid Dynamics (CFD) software to accurately predict hypersonic shock wave laminar boundary layer interactions is examined. A series of independent computations performed by researchers in the US and Europe are presented for two generic configurations (double cone and cylinder) and compared with experimental data. The results illustrate the current capabilities and limitations of modern CFD methods for these flows.

Capabilities for Strategic Adaptation

DEFF Research Database (Denmark)

Distel, Andreas Philipp

This dissertation explores capabilities that enable firms to strategically adapt to environmental changes and preserve competitiveness over time – often referred to as dynamic capabilities. While dynamic capabilities being a popular research domain, too little is known about what these capabiliti...

Strategies for Structural Youth Unemployment: a Capability Approach for Guidance

OpenAIRE

Massimiliano Costa; Daniele Morselli; John Polesel; Suzanne Rice

2015-01-01

The aim of this article is to present an innovative approach for guidance. The article starts by introducing the structural reason of unemployment in Italy. It presents the Australian model of guidance and the new reforms on guidance which are being introduced in Italy. It then describes a Change Laboratory intervention carried in a vocational setting in Australia in 2012, which is proposed as model of guidance based on the capability approach.The different stakeholders actively participate i...

Current research work carried out at the 250 kW TRIGA Mark II reactor

International Nuclear Information System (INIS)

Dimic, V.; Kristof, E.; Rant, J.

1972-01-01

The main physics experiments accomplished during the last two years of the reactor operation include the cold neutron, fast neutron and n-gamma spectrometry, neutron radiography and in the radiochemical laboratory quite extensive program on neutron activation analysis is carried on the seed irradiation facilities in connection with the research contract with the IAEA were constructed. In additional, the connection of the reactor to the on-line computer CDC 1700 is finished. The task of this work is the monitoring and control of the reactor power level and other operating conditions. This paper deals briefly only with the cold neutron, fast neutron and n-gamma spectrometry. The other fields of activity at our reactor will be described more in detail in the separate papers presented in this section

Return currents in solar flares - Collisionless effects

Science.gov (United States)

Rowland, H. L.; Vlahos, L.

1985-01-01

If the primary, precipitating electrons in a solar flare are unstable to beam plasma interactions, it is shown that strong Langmuir turbulence can seriously modify the way in which a return current is carried by the background plasma. In particular, the return (or reverse) current will not be carried by the bulk of the electrons, but by a small number of high velocity electrons. For beam/plasma densities greater than 0.01, this can reduce the effects of collisions on the return current. For higher density beams where the return current could be unstable to current driven instabilities, the effects of strong turbulence anomalous resistivity is shown to prevent the appearance of such instabilities. Again in this regime, how the return current is carried is determined by the beam generated strong turbulence.

Size and transportation capabilities of the existing US cask fleet

International Nuclear Information System (INIS)

Danese, F.L.; Johnson, P.E.; Joy, D.S.

1990-01-01

This study investigates the current spent nuclear fuel cask fleet capability in the United States. In addition, it assesses the degree to which the current fleet would be available, as a contingency, until proposed Office of Civilian Radioactive Waste Management casks become operational. A limited fleet of ten spent fuel transportation casks is found to be readily available for use in Federal waste management efforts over the next decade

NASA Stennis Space Center Integrated System Health Management Test Bed and Development Capabilities

Science.gov (United States)

Figueroa, Fernando; Holland, Randy; Coote, David

2006-01-01

Integrated System Health Management (ISHM) is a capability that focuses on determining the condition (health) of every element in a complex System (detect anomalies, diagnose causes, prognosis of future anomalies), and provide data, information, and knowledge (DIaK)-not just data-to control systems for safe and effective operation. This capability is currently done by large teams of people, primarily from ground, but needs to be embedded on-board systems to a higher degree to enable NASA's new Exploration Mission (long term travel and stay in space), while increasing safety and decreasing life cycle costs of spacecraft (vehicles; platforms; bases or outposts; and ground test, launch, and processing operations). The topics related to this capability include: 1) ISHM Related News Articles; 2) ISHM Vision For Exploration; 3) Layers Representing How ISHM is Currently Performed; 4) ISHM Testbeds & Prototypes at NASA SSC; 5) ISHM Functional Capability Level (FCL); 6) ISHM Functional Capability Level (FCL) and Technology Readiness Level (TRL); 7) Core Elements: Capabilities Needed; 8) Core Elements; 9) Open Systems Architecture for Condition-Based Maintenance (OSA-CBM); 10) Core Elements: Architecture, taxonomy, and ontology (ATO) for DIaK management; 11) Core Elements: ATO for DIaK Management; 12) ISHM Architecture Physical Implementation; 13) Core Elements: Standards; 14) Systematic Implementation; 15) Sketch of Work Phasing; 16) Interrelationship Between Traditional Avionics Systems, Time Critical ISHM and Advanced ISHM; 17) Testbeds and On-Board ISHM; 18) Testbed Requirements: RETS AND ISS; 19) Sustainable Development and Validation Process; 20) Development of on-board ISHM; 21) Taxonomy/Ontology of Object Oriented Implementation; 22) ISHM Capability on the E1 Test Stand Hydraulic System; 23) Define Relationships to Embed Intelligence; 24) Intelligent Elements Physical and Virtual; 25) ISHM Testbeds and Prototypes at SSC Current Implementations; 26) Trailer

Quality control and process capability assessment for injection-moulded micro mechanical parts

DEFF Research Database (Denmark)

Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard

2013-01-01

Quality control of micro components is an increasing challenge. Smaller mechanical parts are characterized by smaller tolerance to be verified. This paper focuses on the dimensional verification of micro injection-moulded components selected from an industrial application. These parts are measured...... using an optical coordinate measuring machine, which guarantees fast surface scans suitable for inline quality control. The uncertainty assessment of the measurements is calculated and three analyses are carried out and discussed in order to investigate the influence parameters in optical coordinate...... metrology. The estimation of the total variability of the optical measurements and the instrument repeatability are reported; moreover, the measurement system capability is evaluated according to the measurement system capability indices Cg and Cgk....

Medical home capabilities of primary care practices that serve sociodemographically vulnerable neighborhoods.

Science.gov (United States)

Friedberg, Mark W; Coltin, Kathryn L; Safran, Dana Gelb; Dresser, Marguerite; Schneider, Eric C

2010-06-14

Under current medical home proposals, primary care practices using specific structural capabilities will receive enhanced payments. Some practices disproportionately serve sociodemographically vulnerable neighborhoods. If these practices lack medical home capabilities, their ineligibility for enhanced payments could worsen disparities in care. Via survey, 308 Massachusetts primary care practices reported their use of 13 structural capabilities commonly included in medical home proposals. Using geocoded US Census data, we constructed racial/ethnic minority and economic disadvantage indices to describe the neighborhood served by each practice. We compared the structural capabilities of "disproportionate-share" practices (those in the most sociodemographically vulnerable quintile on each index) and others. Racial/ethnic disproportionate-share practices were more likely than others to have staff assisting patient self-management (69% vs 55%; P = .003), on-site language interpreters (54% vs 26%; P primary care practices serving sociodemographically vulnerable neighborhoods were more likely than other practices to have structural capabilities commonly included in medical home proposals. Payments tied to these capabilities may aid practices serving vulnerable populations.

Enhancing the Radio Astronomy Capabilities at NASA's Deep Space Network

Science.gov (United States)

Lazio, Joseph; Teitelbaum, Lawrence; Franco, Manuel M.; Garcia-Miro, Cristina; Horiuchi, Shinji; Jacobs, Christopher; Kuiper, Thomas; Majid, Walid

2015-08-01

NASA's Deep Space Network (DSN) is well known for its role in commanding and communicating with spacecraft across the solar system that produce a steady stream of new discoveries in Astrophysics, Heliophysics, and Planetary Science. Equipped with a number of large antennas distributed across the world, the DSN also has a history of contributing to a number of leading radio astronomical projects. This paper summarizes a number of enhancements that are being implemented currently and that are aimed at increasing its capabilities to engage in a wide range of science observations. These enhancements include* A dual-beam system operating between 18 and 27 GHz (~ 1 cm) capable of conducting a variety of molecular line observations, searches for pulsars in the Galactic center, and continuum flux density (photometry) of objects such as nearby protoplanetary disks* Enhanced spectroscopy and pulsar processing backends for use at 1.4--1.9 GHz (20 cm), 18--27 GHz (1 cm), and 38--50 GHz (0.7 cm)* The DSN Transient Observatory (DTN), an automated, non-invasive backend for transient searching* Larger bandwidths (>= 0.5 GHz) for pulsar searching and timing; and* Improved data rates (2048 Mbps) and better instrumental response for very long baseline interferometric (VLBI) observations with the new DSN VLBI processor (DVP), which is providing unprecedented sensitivity for maintenance of the International Celestial Reference Frame (ICRF) and development of future versions.One of the results of these improvements is that the 70~m Deep Space Station 43 (DSS-43, Tidbinbilla antenna) is now the most sensitive radio antenna in the southern hemisphere. Proposals to use these systems are accepted from the international community.Part of this research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics & Space Administration.

Carrying Capacity Model Applied to Coastal Ecotourism of Baluran National Park, Indonesia

Science.gov (United States)

Armono, H. D.; Rosyid, D. M.; Nuzula, N. I.

2017-07-01

The resources of Baluran National Park have been used for marine and coastal ecotourism. The increasing number of visitors has led to the increasing of tourists and its related activities. This condition will cause the degradation of resources and the welfare of local communities. This research aims to determine the sustainability of coastal ecotourism management by calculating the effective number of tourists who can be accepted. The study uses the concept of tourism carrying capacity, consists the ecological environment, economic, social and physical carrying capacity. The results of the combined carrying capacity analysis in Baluran National Park ecotourism shows that the number of 3.288 people per day (151.248 tourists per year) is the maximum number of accepted tourists. The current number of tourist arrivals is only 241 people per day (87.990 tourists per year) which is far below the carrying capacity.

Critical operations capabilities in a high cost environment: a multiple case study

Science.gov (United States)

Sansone, C.; Hilletofth, P.; Eriksson, D.

2018-04-01

Operations capabilities have been a popular research area for many years and several frameworks have been proposed in the literature. The current frameworks do not take specific contexts into consideration, for instance a high cost environment. This research gap is of particular interest since a manufacturing relocation process has been ongoing the last decades, leading to a huge amount of manufacturing being moved from high to low cost environments. The purpose of this study is to identify critical operations capabilities in a high cost environment. The two research questions were: What are the critical operations capabilities dimensions in a high cost environment? What are the critical operations capabilities in a high cost environment? A multiple case study was conducted and three Swedish manufacturing firms were selected. The study was based on the investigation of an existing framework of operations capabilities. The main dimensions of operations capabilities included in the framework were: cost, quality, delivery, flexibility, service, innovation and environment. Each of the dimensions included two or more operations capabilities. The findings confirmed the validity of the framework and its usefulness in a high cost environment and a new operations capability was revealed (employee flexibility).

HYDROïD humanoid robot head with perception and emotion capabilities :Modeling, Design and Experimental Results

Directory of Open Access Journals (Sweden)

Samer eAlfayad

2016-04-01

Full Text Available In the framework of the HYDROïD humanoid robot project, this paper describes the modeling and design of an electrically actuated head mechanism. Perception and emotion capabilities are considered in the design process. Since HYDROïD humanoid robot is hydraulically actuated, the choice of electrical actuation for the head mechanism addressed in this paper is justified. Considering perception and emotion capabilities leads to a total number of 15 degrees of freedom for the head mechanism which are split on four main sub-mechanisms: the neck, the mouth, the eyes and the eyebrows. Biological data and kinematics performances of human head are taken as inputs of the design process. A new solution of uncoupled eyes is developed to possibly address the master-slave process that links the human eyes as well as vergence capabilities. Modeling each sub-system is carried out in order to get equations of motion, their frequency responses and their transfer functions. The neck pitch rotation is given as a study example. Then, the head mechanism performances are presented through a comparison between model and experimental results validating the hardware capabilities. Finally, the head mechanism is integrated on the HYDROïD upper-body. An object tracking experiment coupled with emotional expressions is carried out to validate the synchronization of the eye rotations with the body motions.

Heavy Lift Launch Capability with a New Hydrocarbon Engine

Science.gov (United States)

Threet, Grady E., Jr.; Holt, James B.; Philips, Alan D.; Garcia, Jessica A.

2011-01-01

The Advanced Concepts Office at NASA's George C. Marshall Space Flight Center was tasked to define the thrust requirement of a new liquid oxygen rich staged combustion cycle hydrocarbon engine that could be utilized in a launch vehicle to meet NASA s future heavy lift needs. Launch vehicle concepts were sized using this engine for different heavy lift payload classes. Engine out capabilities for one of the heavy lift configurations were also analyzed for increased reliability that may be desired for high value payloads or crewed missions. The applicability for this engine in vehicle concepts to meet military and commercial class payloads comparable to current ELV capability was also evaluated.

Organizational Capability Deployment Analysis for Technology Conversion into Processes, Products and Services

Directory of Open Access Journals (Sweden)

Tomoe Daniela Hamanaka Gusberti

2013-12-01

Full Text Available This article discusses Organizational Capabilities as the basic components of business models that emerged under the New Product Development Process and Technological Management. In the context of the new Technology Based Companies Development, it adopts a qualitative research in order to identify, analyze and underpin the organizational capability deployment in a process of technology conversion into product and service. The analysis was carried out considering concepts from literature review, in a technology based enterprise started by an academic spin-off company. The analysis enabled the elicitation of a Business Model and the discussion of their components, and correspondent evolution hypothesis. The paper provides an example of capability deployment accordingly the established theory illustrated by a case study. The study not just enumerate the needed partners, resources, customer channels, it enabled the description of their connection, representing the logic behind the decision made to develop the conceptual model. This detailed representation of the model allows better addressed discussions.

Critical-state model for the determination of critical currents in disk-shaped superconductors

International Nuclear Information System (INIS)

Frankel, D.J.

1979-01-01

A series of experiments has been carried out on the flux trapping and shielding capabilities of a flat strip of Nb-Ti/Cu composite material. A circular piece of material from the strip was tested in a uniform field directed perpendicularly to the surface of the sample. Profiles of the normal component of the field along the sample diameter were measured. The critical-state model was adapted for this geometry and proved capable of reproducing the measured field profiles. Model curves agreed well with experimental field profiles generated when the full sample was in the critical state, when only a portion of the sample was in the critical state, and when profiles were obtained after the direction of the rate change of the magnetic field was reversed. The adaption of the critical-state model to disk geometry provides a possible method either to derive values of the critical current from measurements of field profiles above thin flat samples, or to predict the trapping and shielding behavior of such samples if the critical current is already known. This method of determining critical currents does not require that samples be formed into narrow strips or wires, as is required for direct measurements of J/sub c/, or into tubes or cylinders, as is usually required for magnetization-type measurements. Only a relatively small approximately circular piece of material is needed. The method relies on induced currents, so there is no need to pass large currents into the sample. The field-profile measurements are easily performed with expensive Hall probes and do not require detection of the resistive transition of the superconductor

Process for Upgrading Cognitive Assessment Capabilities Onboard the International Space Station

Science.gov (United States)

Picano, J. J.; Seaton, K. A.; Holland, A. W.

2016-01-01

MOTIVATION: Spaceflight poses varied and unique risks to the brain and cognitive functioning including radiation exposure, sleep disturbance, fatigue, fluid shifts (increased intracranial pressure), toxin exposure, elevated carbon dioxide, and traumatic brain injury, among others. These potential threats to cognitive functioning are capable of degrading performance and compromising mission success. Furthermore, the threats may increase in severity, and new types of threats may emerge for longer duration exploration missions. This presentation will describe the process used to identify gaps in our current approach, evaluate best practices in cognitive assessment, and transition new cognitive assessment tools to operational use. OVERVIEW: Risks to brain health and performance posed by spaceflight missions require sensitive tools to assess cognitive functioning of astronauts in flight. The Spaceflight Cognitive Assessment Tool for Windows (WinSCAT) is the automated cognitive assessment tool currently deployed onboard the International Space Station (ISS). WinSCAT provides astronauts and flight surgeons with objective data to monitor neurocognitive functioning. WinSCAT assesses 5 discrete cognitive domains, is sensitive to changes in cognitive functioning, and was designed to be completed in less than 15 minutes. However, WinSCAT does not probe other areas of cognitive functioning that might be important to mission success. Researchers recently have developed batteries that may expand current capabilities, such as increased sensitivity to subtle fluctuations in cognitive functioning. Therefore, we engaged in a systematic process review in order to improve upon our current capabilities and incorporate new advances in cognitive assessment. This process included a literature review on newer measures of neurocognitive assessment, surveys of operational flight surgeons at NASA regarding needs and gaps in our capabilities, and expert panel review of candidate cognitive

Buck-Boost Current-Source Inverters With Diode-Inductor Network

DEFF Research Database (Denmark)

Gao, Feng; Liang, Chao; Loh, Poh Chiang

2009-01-01

This paper presents a number of novel currentsource inverters (CSIs) with enhanced current buck-boost capability. By adding a unique diode-inductor network between the inverter circuitry and current-boost elements, the proposed buck-boost CSIs demonstrate a doubling of current-boost capability......, as compared with other recently reported buck-boost CSIs. For controlling the proposed CSIs, two modulation schemes are designed for achieving either optimized harmonic performance or minimized commutation count without influencing the inverter current buck-boost gain. These theoretical findings were...

Capability-based computer systems

CERN Document Server

Levy, Henry M

2014-01-01

Capability-Based Computer Systems focuses on computer programs and their capabilities. The text first elaborates capability- and object-based system concepts, including capability-based systems, object-based approach, and summary. The book then describes early descriptor architectures and explains the Burroughs B5000, Rice University Computer, and Basic Language Machine. The text also focuses on early capability architectures. Dennis and Van Horn's Supervisor; CAL-TSS System; MIT PDP-1 Timesharing System; and Chicago Magic Number Machine are discussed. The book then describes Plessey System 25

Mobile Test Capabilities

Data.gov (United States)

Federal Laboratory Consortium — The Electrical Power Mobile Test capabilities are utilized to conduct electrical power quality testing on aircraft and helicopters. This capability allows that the...

Study of magnetorheology and sensing capabilities of MR elastomers

International Nuclear Information System (INIS)

Tian, T F; Li, W H; Alici, G

2013-01-01

This study focuses on the magnetorheology and sensing capability of graphite based Magnetorheological Elastomers (Gr MREs). By introducing graphite (Gr) to conventional MREs, the Gr MREs are derived. The anisotropic sample with 20% graphite weight fraction was selected to be compared with anisotropic conventional MREs. The microstructures of anisotropic Gr MREs and conventional MREs were observed. Both steady state tests and dynamic tests were conducted to study rheological properties of the samples. For dynamic tests, the effects of strain amplitude, and frequency on both storage modulus and loss modulus were measured. For sensing capability, the resistance of selected Gr MREs under different magnetic fields and external loadings is measured with a multi-meter. Either higher magnetic field or more external loading results in the resistance increment. Based on an ideal assumption of perfect chain structure, a mathematical model was proposed to investigate the relationship between the MRE resistance with the external loadings. In this model, the current flowing through the chain structure consists of both tunnel current and conductivity current, both of which depends on external loadings. The modelling parameters were identified and reconstructed from comparison with experimental results. The comparison indicates that both experimental results and modelling prediction agree favourably well.

Diode-Assisted Buck-Boost Current Source Inverters

DEFF Research Database (Denmark)

Gao, F.; Cai, Liang; Loh, P.C.

2007-01-01

This paper presents a couple of novel current source inverters (CSIs) with the enhanced current buckboost capability. With the unique diode-inductor network added between current source inverter circuitry and current boost elements, the proposed buck-boost current source inverters demonstrate...... uninfluenced. Lastly, all theoretical findings were verified experimentally using constructed laboratory prototypes....

Critical current density and wire fabrication of high-TC superconductors

International Nuclear Information System (INIS)

Schlabach, T.D.; Jin, S.; Sherwood, R.C.; Tiefel, T.H.

1989-01-01

In this paper, some of the recent investigations of wire fabrication techniques and critical current behavior in high T c superconductors will be reviewed. In spite of the tremendous interest and research effort, the progress toward major applications of the bulk high-temperature superconductors has been impeded by, among other thins, the low critical currents and their severe deterioration in weak magnetic fields. Significant advances, however, have been made in understanding the causes of the problem as well as in improving the current-carrying capacity through proper microstructural control such as the melt-textured-growth in Y-Ba-Cu-O. The low density of effective flux-pinning sites in bulk Y-Ba-Cu-O limits J c at 77K in high magnetic fields to about 10 4 A/cm 2 even in the absence of weak links. Magnetization measurements on Bi-Sr-Ca-Cu-O and Tl-Ba-Ca-Cu-O at 77K by various researchers indicate even weaker flux pinning capabilities in these materials than in Y-Ba-Cu-O. The challenge in the future is to obtain suitable flux-pinning defects by choosing the right processing and chemistry changes

Optical Carry Adder.

Science.gov (United States)

1987-03-01

AOM’s) with the deflected beam as the modulator "on" state. These AOM’s ( TeO2 crystals, manufactured by Newport E.O. Systems) have high deflection...caused by the slow acoustic propagation (4.2 - 105 cm/s for TeO2 ), but this delay can be minimized by placing the laser beam close to the acoustic...dependent jitter in the optical carry to below 1 ns, the total carry path must be less than 30 cm long (or 20 cm in glass , 14 cm in LiNbO 3). Thus, a 32

Maintaining operational excellence: building capability beyond knowledge transfer

International Nuclear Information System (INIS)

Ramjist, S.

2013-01-01

This paper describes the issues relating to human resources and maintaining capabilities in an organization. The sustaining elements are: vision and plan for excellence; invest in the plant; invest in human capital; find and fix problems. There is much discussion about knowledge transfer and retention that is mainly focused on technical attributes and proficiency. We are losing more people with the requisite managerial and leadership capability than we can develop and backfill at a Time when our industry is facing increased competition and decreased margins. We are vulnerable because this Increases our dependence on augmented staff for certain key leadership roles. Previous methods for developing people will take too long and does not appeal to current generation. A solution, not the only solution, but the one we have chosen is initial hiring of operators, maintainers and engineers, internal promotion for key roles (FLM, FSOS, Shift Supervisor, Section Manager, ANO) and focus on all three aspects of capability and looking for leadership traits. Look for ambition, drive, initiative and motivation. Identify, separate and stream. Take specific measures to accelerate growth.

Maintaining operational excellence: building capability beyond knowledge transfer

Energy Technology Data Exchange (ETDEWEB)

Ramjist, S. [Ontario Power Generation, Darlington Nuclear Generating Station, Bowmanville, Ontario (Canada)

2013-07-01

This paper describes the issues relating to human resources and maintaining capabilities in an organization. The sustaining elements are: vision and plan for excellence; invest in the plant; invest in human capital; find and fix problems. There is much discussion about knowledge transfer and retention that is mainly focused on technical attributes and proficiency. We are losing more people with the requisite managerial and leadership capability than we can develop and backfill at a Time when our industry is facing increased competition and decreased margins. We are vulnerable because this Increases our dependence on augmented staff for certain key leadership roles. Previous methods for developing people will take too long and does not appeal to current generation. A solution, not the only solution, but the one we have chosen is initial hiring of operators, maintainers and engineers, internal promotion for key roles (FLM, FSOS, Shift Supervisor, Section Manager, ANO) and focus on all three aspects of capability and looking for leadership traits. Look for ambition, drive, initiative and motivation. Identify, separate and stream. Take specific measures to accelerate growth.

A Web Service Protocol Realizing Interoperable Internet of Things Tasking Capability

Science.gov (United States)

Huang, Chih-Yuan; Wu, Cheng-Hung

2016-01-01

The Internet of Things (IoT) is an infrastructure that interconnects uniquely-identifiable devices using the Internet. By interconnecting everyday appliances, various monitoring, and physical mashup applications can be constructed to improve human’s daily life. In general, IoT devices provide two main capabilities: sensing and tasking capabilities. While the sensing capability is similar to the World-Wide Sensor Web, this research focuses on the tasking capability. However, currently, IoT devices created by different manufacturers follow different proprietary protocols and are locked in many closed ecosystems. This heterogeneity issue impedes the interconnection between IoT devices and damages the potential of the IoT. To address this issue, this research aims at proposing an interoperable solution called tasking capability description that allows users to control different IoT devices using a uniform web service interface. This paper demonstrates the contribution of the proposed solution by interconnecting different IoT devices for different applications. In addition, the proposed solution is integrated with the OGC SensorThings API standard, which is a Web service standard defined for the IoT sensing capability. Consequently, the Extended SensorThings API can realize both IoT sensing and tasking capabilities in an integrated and interoperable manner. PMID:27589759

A Web Service Protocol Realizing Interoperable Internet of Things Tasking Capability.

Science.gov (United States)

Huang, Chih-Yuan; Wu, Cheng-Hung

2016-08-31

The Internet of Things (IoT) is an infrastructure that interconnects uniquely-identifiable devices using the Internet. By interconnecting everyday appliances, various monitoring, and physical mashup applications can be constructed to improve human's daily life. In general, IoT devices provide two main capabilities: sensing and tasking capabilities. While the sensing capability is similar to the World-Wide Sensor Web, this research focuses on the tasking capability. However, currently, IoT devices created by different manufacturers follow different proprietary protocols and are locked in many closed ecosystems. This heterogeneity issue impedes the interconnection between IoT devices and damages the potential of the IoT. To address this issue, this research aims at proposing an interoperable solution called tasking capability description that allows users to control different IoT devices using a uniform web service interface. This paper demonstrates the contribution of the proposed solution by interconnecting different IoT devices for different applications. In addition, the proposed solution is integrated with the OGC SensorThings API standard, which is a Web service standard defined for the IoT sensing capability. Consequently, the Extended SensorThings API can realize both IoT sensing and tasking capabilities in an integrated and interoperable manner.

Building Service Provider Capabilities

DEFF Research Database (Denmark)

Brandl, Kristin; Jaura, Manya; Ørberg Jensen, Peter D.

2015-01-01

In this paper we study whether and how the interaction between clients and the service providers contributes to the development of capabilities in service provider firms. In situations where such a contribution occurs, we analyze how different types of activities in the production process...... process. We find that clients influence the development of human capital capabilities and management capabilities in reciprocally produced services. While in sequential produced services clients influence the development of organizational capital capabilities and management capital capabilities....... of the services, such as sequential or reciprocal task activities, influence the development of different types of capabilities. We study five cases of offshore-outsourced knowledge-intensive business services that are distinguished according to their reciprocal or sequential task activities in their production...

ITER operational space for full plasma current H-mode operation

Energy Technology Data Exchange (ETDEWEB)

Mattei, M. [Assoc. Euratom-ENEA-CREATE, Seconda University di Napoli, Aversa (Italy)], E-mail: massimiliano.mattei@unirc.it; Cavinato, M.; Saibene, G.; Portone, A. [Fusion for Energy Joint Undertaking, 08019 Barcelona (Spain); Albanese, R.; Ambrosino, G. [Assoc. Euratom-ENEA-CREATE, University Napoli Federico II, Napoli (Italy); Horton, L.D. [Max Planck-Institut fur Plasmaphysik, EURATOM-Association, Garching (Germany); Kessel, C. [Princeton Plasma Physics Laboratory, Princeton University (United States); Koechl, F. [Assoc. EURATOM-OAW/ATI, Vienna (Austria); Lomas, P.J. [Euratom/UKAEA Fusion Assoc., Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Nunes, I. [Assoc. EURATOM/IST, Centro de Fusao Nuclear, Lisbon (Portugal); Parail, V. [Max Planck-Institut fur Plasmaphysik, EURATOM-Association, Garching (Germany); Sartori, R. [Fusion for Energy Joint Undertaking, 08019 Barcelona (Spain); Sips, A.C.C. [Max Planck-Institut fur Plasmaphysik, EURATOM-Association, Garching (Germany); Thomas, P.R. [Fusion for Energy Joint Undertaking, 08019 Barcelona (Spain)

2009-06-15

Sensitivity studies performed as part of the ITER IO design review highlighted a very stiff dependence of the maximum Q attainable on the machine parameters. In particular, in the considered range, the achievable Q scales with I{sub p}{sup 4}. As a consequence, the achievement of the ITER objective of Q = 10 requires the machine to be routinely operated at a nominal current I{sub p} of 15 MA, and at full toroidal field BT of 5.3 T. This paper analyses the capabilities of the poloidal field (PF) system (including the central solenoid) of ITER against realistic full current plasma scenarios. An exploration of the ITER operational space for the 15 and 17 MA inductive scenario is carried out. An extensive analysis includes the evaluation of margins for the closed loop shape control action. The overall results of this analysis indicate that the control of a 15 MA plasma in ITER is likely to be adequate in the range of li 0.7-0.9 whereas, for a 17 MA plasma, control capabilities are strongly reduced. The ITER operational space, provided by the reference pre-2008 PF system, was rather limited if compared to the range of parameters normally observed in present experiment. Proposals for increasing the current and field limits on PF2, PF5 and PF6, adjustment on the number of turns in some of the PF coils, changes to the divertor dome geometry, to the conductor of PF6 to Nb3Sn, moving PF6 radially and/or vertically are described and evaluated in the paper. Some of them have been included in 2008 ITER revised configuration.

Dynamic capabilities for cooperation in Brazilian multinational and factors determining its management

Directory of Open Access Journals (Sweden)

Priscila Rezende da Costa

2015-05-01

Full Text Available In the context of emerging companies’ growth, current challenges depend on the local generation of product and process innovations, as well as dynamic capability to generate innovative solutions cooperatively and new globe business models. The objective of this study is to analyse the determining managerial factors for the dynamic capability of cooperation in Brazilian multinationals (BMNs. A survey was conducted with a sample of 60 BMNs, and a structured questionnaire and statistical tests with factorial analysis and Cronbach's alpha were used. The aggregate analysis of the results indicates that BMNs are going through a transitional process between the operational capability of cooperation and the capability for dynamic cooperation, which are relevant to the continuous adaptation of already-established cooperative management routines and the evaluation and incorporation of the relational capability of management practices that consider systemic flows, open innovation and integrate strategic intentionality into cooperative processes.

Surfactant-assisted mild solvothermal synthesis of nanostructured LiFePO4/C cathodes evidencing ultrafast rate capability

International Nuclear Information System (INIS)

Di Lupo, F.; Meligrana, G.; Gerbaldi, C.; Bodoardo, S.; Penazzi, N.

2015-01-01

Highlights: • Nanostructured LiFePO 4 /C by surfactant assisted solvothermal synthesis. • Novel and simple preparation method, with no critical parameters. • Noticeable stability, good capacity values and capacity retention after prolonged cycling. • Improved rate capability at a very high C-rate (100C). • High performance for the next generation of advanced high power Li-ion batteries. - Abstract: A surfactant-assisted solvothermal synthesis is hereby applied to produce carbon-coated LiFePO 4 /C nanostructured Li-ion battery cathodes. The use of different mixed alcohol/water solutions for the dissolution of a cationic surfactant is absolutely peculiar in this field and herewith exploited to tailor-make the properties of the active material particles (e.g., morphology and electrochemical behaviour). Thorough investigation is carried out by means of X-ray powder diffraction, scanning and transmission electron microscopy, cyclic voltammetry and constant current charge-discharge cycling. The best performing sample, obtained in a 20:80 w/w ethanol:water solution, demonstrates good specific capacity values, high Coulombic efficiency and rate capability, with stable behaviour upon long-term cycling even at ultrafast 100C discharge regime. This is definitely remarkable for a nanosized powder specifically conceived for high power applications obtained by means of low cost raw materials, simple and reliable procedures

Application of a modified flux-coupling type superconducting fault current limiter to transient performance enhancement of micro-grid

Energy Technology Data Exchange (ETDEWEB)

Chen, Lei, E-mail: stclchen1982@163.com [School of Electrical Engineering, Wuhan University, Wuhan 430072 (China); Zheng, Feng; Deng, Changhong; Li, Shichun; Li, Miao; Liu, Hui [School of Electrical Engineering, Wuhan University, Wuhan 430072 (China); Zhu, Lin [Department of Electrical Engineering and Computer Science, University of Tennessee, Knoxville 37996 (United States); Guo, Fang [Department of Substation, Guang Dong Electric Power Design Institute, Guangzhou 510663 (China)

2015-11-15

Highlights: • A modified flux-coupling type SFCL is suggested to enhance the transient performance of a micro-grid. • The SFCL’s main contribution is to improve the micro-grid’s fault ride-through capability. • The SFCL also can make the micro-grid carry out a smooth transition between its grid-connected and islanded modes. • The simulations show that the SFCL can availably strengthen the micro-grid’s voltage and frequency stability. - Abstract: Concerning the application and development of a micro-grid system which is designed to accommodate high penetration of intermittent renewable resources, one of the main issues is related to an increase in the fault-current level. It is crucial to ensure the micro-grid’s operational stability and service reliability when a fault occurs in the main network. In this paper, our research group suggests a modified flux-coupling type superconducting fault current limiter (SFCL) to enhance the transient performance of a typical micro-grid system. The SFCL is installed at the point of common coupling (PCC) between the main network and the micro-grid, and it is expected to actively improve the micro-grid’s fault ride-through capability. And for some specific faults, the micro-grid should disconnect from the main network, and the SFCL’s contribution is to make the micro-grid carry out a smooth transition between its grid-connected and islanded modes. Related theory derivation, technical discussion and simulation analysis are performed. From the demonstrated results, applying the SFCL can effectively limit the fault current, maintain the power balance, and enhance the voltage and frequency stability of the micro-grid.

Application of a modified flux-coupling type superconducting fault current limiter to transient performance enhancement of micro-grid

International Nuclear Information System (INIS)

Chen, Lei; Zheng, Feng; Deng, Changhong; Li, Shichun; Li, Miao; Liu, Hui; Zhu, Lin; Guo, Fang

2015-01-01

Highlights: • A modified flux-coupling type SFCL is suggested to enhance the transient performance of a micro-grid. • The SFCL’s main contribution is to improve the micro-grid’s fault ride-through capability. • The SFCL also can make the micro-grid carry out a smooth transition between its grid-connected and islanded modes. • The simulations show that the SFCL can availably strengthen the micro-grid’s voltage and frequency stability. - Abstract: Concerning the application and development of a micro-grid system which is designed to accommodate high penetration of intermittent renewable resources, one of the main issues is related to an increase in the fault-current level. It is crucial to ensure the micro-grid’s operational stability and service reliability when a fault occurs in the main network. In this paper, our research group suggests a modified flux-coupling type superconducting fault current limiter (SFCL) to enhance the transient performance of a typical micro-grid system. The SFCL is installed at the point of common coupling (PCC) between the main network and the micro-grid, and it is expected to actively improve the micro-grid’s fault ride-through capability. And for some specific faults, the micro-grid should disconnect from the main network, and the SFCL’s contribution is to make the micro-grid carry out a smooth transition between its grid-connected and islanded modes. Related theory derivation, technical discussion and simulation analysis are performed. From the demonstrated results, applying the SFCL can effectively limit the fault current, maintain the power balance, and enhance the voltage and frequency stability of the micro-grid.

Size and transportation capabilities of the existing U.S. cask fleet

International Nuclear Information System (INIS)

Danese, F.L.; Johnson, P.E.; Joy, D.S.

1990-01-01

This paper investigates the current spent nuclear fuel cask fleet capability in the United States. It assesses the degree to which the current fleet would be available, as a contingency, until proposed Office of Civilian Radioactive Waste Management casks become operational. A limited fleet of ten spent fuel transportation casks is found to be readily available for use in Federal waste management efforts over the next decade

Sensing capabilities of graphite based MR elastomers

International Nuclear Information System (INIS)

Tian, T F; Li, W H; Deng, Y M

2011-01-01

This paper presents both experimental and theoretical investigations of the sensing capabilities of graphite based magnetorheological elastomers (MREs). In this study, eight MRE samples with varying graphite weight fractions were fabricated and their resistance under different magnetic fields and external loadings were measured with a multi-meter. With an increment of graphite weight fraction, the resistance of MRE sample decreases steadily. Higher magnetic fields result in a resistance increase. Based on an ideal assumption of a perfect chain structure, a mathematical model was developed to investigate the relationship between the MRE resistance with external loading. In this model, the current flowing through the chain structure consists of both a tunnel current and a conductivity current, both of which depend on external loadings. The modelling parameters have been identified and reconstructed from comparison with experimental results. The comparison indicates that both experimental results and modelling predictions agree favourably well

Gun Carrying by High School Students in Boston, MA: Does Overestimation of Peer Gun Carrying Matter?

Science.gov (United States)

Hemenway, David; Vriniotis, Mary; Johnson, Renee M.; Miller, Matthew; Azrael, Deborah

2011-01-01

This paper investigates: (1) whether high school students overestimate gun carrying by their peers, and (2) whether those students who overestimate peer gun carrying are more likely to carry firearms. Data come from a randomly sampled survey conducted in 2008 of over 1700 high school students in Boston, MA. Over 5% of students reported carrying a…

Capabilities of current wildfire models when simulating topographical flow

Science.gov (United States)

Kochanski, A.; Jenkins, M.; Krueger, S. K.; McDermott, R.; Mell, W.

2009-12-01

Accurate predictions of the growth, spread and suppression of wild fires rely heavily on the correct prediction of the local wind conditions and the interactions between the fire and the local ambient airflow. Resolving local flows, often strongly affected by topographical features like hills, canyons and ridges, is a prerequisite for accurate simulation and prediction of fire behaviors. In this study, we present the results of high-resolution numerical simulations of the flow over a smooth hill, performed using (1) the NIST WFDS (WUI or Wildland-Urban-Interface version of the FDS or Fire Dynamic Simulator), and (2) the LES version of the NCAR Weather Research and Forecasting (WRF-LES) model. The WFDS model is in the initial stages of development for application to wind flow and fire spread over complex terrain. The focus of the talk is to assess how well simple topographical flow is represented by WRF-LES and the current version of WFDS. If sufficient progress has been made prior to the meeting then the importance of the discrepancies between the predicted and measured winds, in terms of simulated fire behavior, will be examined.

PROCESS CAPABILITY ESTIMATION FOR NON-NORMALLY DISTRIBUTED DATA USING ROBUST METHODS - A COMPARATIVE STUDY

Directory of Open Access Journals (Sweden)

Yerriswamy Wooluru

2016-06-01

Full Text Available Process capability indices are very important process quality assessment tools in automotive industries. The common process capability indices (PCIs Cp, Cpk, Cpm are widely used in practice. The use of these PCIs based on the assumption that process is in control and its output is normally distributed. In practice, normality is not always fulfilled. Indices developed based on normality assumption are very sensitive to non- normal processes. When distribution of a product quality characteristic is non-normal, Cp and Cpk indices calculated using conventional methods often lead to erroneous interpretation of process capability. In the literature, various methods have been proposed for surrogate process capability indices under non normality but few literature sources offer their comprehensive evaluation and comparison of their ability to capture true capability in non-normal situation. In this paper, five methods have been reviewed and capability evaluation is carried out for the data pertaining to resistivity of silicon wafer. The final results revealed that the Burr based percentile method is better than Clements method. Modelling of non-normal data and Box-Cox transformation method using statistical software (Minitab 14 provides reasonably good result as they are very promising methods for non - normal and moderately skewed data (Skewness <= 1.5.

FMEF/experimental capabilities

International Nuclear Information System (INIS)

Burgess, C.A.; Dronen, V.R.

1981-01-01

The Fuels and Materials Examination Facility (FMEF), under construction at the Hanford site north of Richland, Washington, will be one of the most modern facilities offering irradiated fuels and materials examination capabilities and fuel fabrication development technologies. Scheduled for completion in 1984, the FMEF will provide examination capability for fuel assemblies, fuel pins and test pins irradiated in the FFTF. Various functions of the FMEF are described, with emphasis on experimental data-gathering capabilities in the facility's Nondestructive and Destructive examination cell complex

Nonequilibrium current-carrying steady states in the anisotropic X Y spin chain

Science.gov (United States)

Lancaster, Jarrett L.

2016-05-01

Out-of-equilibrium behavior is explored in the one-dimensional anisotropic X Y model. Initially preparing the system in the isotropic X X model with a linearly varying magnetic field to create a domain-wall magnetization profile, dynamics is generated by rapidly changing the exchange interaction anisotropy and external magnetic field. Relaxation to a nonequilibrium steady state is studied analytically at the critical transverse Ising point, where correlation functions may be computed in closed form. For arbitrary values of anisotropy and external field, an effective generalized Gibbs' ensemble is shown to accurately describe observables in the long-time limit. Additionally, we find spatial oscillations in the exponentially decaying, transverse spin-spin correlation functions with wavelength set by the magnetization jump across the initial domain wall. This wavelength depends only weakly on anisotropy and magnetic field in contrast to the current, which is highly dependent on these parameters.

Infant carrying methods: Correlates and associated musculoskeletal disorders among nursing mothers in Nigeria.

Science.gov (United States)

Ojukwu, Chidiebele Petronilla; Anyanwu, Godson Emeka; Anekwu, Emelie Morris; Chukwu, Sylvester Caesar; Fab-Agbo, Chukwubuikem

2017-10-01

Infant carrying is an integral part of the mothering occupation. Paucity of data exists on its correlates and associated musculoskeletal injuries. In this study, factors and musculoskeletal injuries associated with infant carrying were investigated in 227 nursing mothers, using a structured questionnaire. 77.1% utilised the back infant carrying methods (ICM). Maternal comfort was the major factor influencing participants' (37.4%) choices of ICMs. Infant's age (p = .000) and transportation means (p = .045) were significantly associated with ICMs. Low back pain (82.8%) and upper back pain (74.9%) were the most reported musculoskeletal discomforts associated with ICMs, especially among women who utilised back ICM. Back ICM is predominantly used by nursing mothers. Impact statement Infant carrying has been associated with increased energy cost and biomechanical changes. Currently, there is a paucity of data on infant carrying-related musculoskeletal injuries. In this study, investigating factors and musculoskeletal injuries associated with infant carrying, the results showed that back infant carrying method is predominantly used by nursing mothers. Age of the infant and mothers' means of transportation were determinant factors of infant carrying methods. Among the several reported infant carrying-related musculoskeletal disorders, low back and upper back pain were the most prevalent, especially among women who utilised the back infant carrying method. There is need for women's health specialists to introduce appropriate ergonomic training and interventions on infant carrying tasks in order to improve maternal musculoskeletal health during the childbearing years and beyond. Further experimental studies on the effects of various infant carrying methods on the musculoskeletal system are recommended.

Marshall Space Flight Center's Impact Testing Facility Capabilities

Science.gov (United States)

Finchum, Andy; Hubbs, Whitney; Evans, Steve

2008-01-01

Marshall Space Flight Center s (MSFC) Impact Testing Facility (ITF) serves as an important installation for space and missile related materials science research. The ITF was established and began its research in spacecraft debris shielding in the early 1960s, then played a major role in the International Space Station debris shield development. As NASA became more interested in launch debris and in-flight impact concerns, the ITF grew to include research in a variety of impact genres. Collaborative partnerships with the DoD led to a wider range of impact capabilities being relocated to MSFC as a result of the closure of Particle Impact Facilities in Santa Barbara, California. The Particle Impact Facility had a 30 year history in providing evaluations of aerospace materials and components during flights through rain, ice, and solid particle environments at subsonic through hypersonic velocities. The facility s unique capabilities were deemed a "National Asset" by the DoD. The ITF now has capabilities including environmental, ballistic, and hypervelocity impact testing utilizing an array of air, powder, and two-stage light gas guns to accommodate a variety of projectile and target types and sizes. Numerous upgrades including new instrumentation, triggering circuitry, high speed photography, and optimized sabot designs have been implemented. Other recent research has included rain drop demise characterization tests to obtain data for inclusion in on-going model development. The current and proposed ITF capabilities range from rain to micrometeoroids allowing the widest test parameter range possible for materials investigations in support of space, atmospheric, and ground environments. These test capabilities including hydrometeor, single/multi-particle, ballistic gas guns, exploding wire gun, and light gas guns combined with Smooth Particle Hydrodynamics Code (SPHC) simulations represent the widest range of impact test capabilities in the country.

Satellite-based Tropical Cyclone Monitoring Capabilities

Science.gov (United States)

Hawkins, J.; Richardson, K.; Surratt, M.; Yang, S.; Lee, T. F.; Sampson, C. R.; Solbrig, J.; Kuciauskas, A. P.; Miller, S. D.; Kent, J.

2012-12-01

Satellite remote sensing capabilities to monitor tropical cyclone (TC) location, structure, and intensity have evolved by utilizing a combination of operational and research and development (R&D) sensors. The microwave imagers from the operational Defense Meteorological Satellite Program [Special Sensor Microwave/Imager (SSM/I) and the Special Sensor Microwave Imager Sounder (SSMIS)] form the "base" for structure observations due to their ability to view through upper-level clouds, modest size swaths and ability to capture most storm structure features. The NASA TRMM microwave imager and precipitation radar continue their 15+ yearlong missions in serving the TC warning and research communities. The cessation of NASA's QuikSCAT satellite after more than a decade of service is sorely missed, but India's OceanSat-2 scatterometer is now providing crucial ocean surface wind vectors in addition to the Navy's WindSat ocean surface wind vector retrievals. Another Advanced Scatterometer (ASCAT) onboard EUMETSAT's MetOp-2 satellite is slated for launch soon. Passive microwave imagery has received a much needed boost with the launch of the French/Indian Megha Tropiques imager in September 2011, basically greatly supplementing the very successful NASA TRMM pathfinder with a larger swath and more frequent temporal sampling. While initial data issues have delayed data utilization, current news indicates this data will be available in 2013. Future NASA Global Precipitation Mission (GPM) sensors starting in 2014 will provide enhanced capabilities. Also, the inclusion of the new microwave sounder data from the NPP ATMS (Oct 2011) will assist in mapping TC convective structures. The National Polar orbiting Partnership (NPP) program's VIIRS sensor includes a day night band (DNB) with the capability to view TC cloud structure at night when sufficient lunar illumination exits. Examples highlighting this new capability will be discussed in concert with additional data fusion efforts.

Evaluation of Current Planetary Boundary Layer Retrieval Capabilities from Space

Science.gov (United States)

Santanello, Joseph A., Jr.; Schaefer, Alexander J.; Blaisdell, John; Yorks, John

2016-01-01

The PBL over land remains a significant gap in our water and energy cycle understanding from space. This work combines unique NASA satellite and model products to demonstrate the ability of current sensors (advanced IR sounding and lidar) to retrieve PBL properties and in turn their potential to be used globally to evaluate and improve weather and climate prediction models. While incremental progress has been made in recent AIRS retrieval versions, insufficient vertical resolution remains in terms of detecting PBL properties. Lidar shows promise in terms of detecting vertical gradients (and PBLh) in the lower troposphere, but daytime conditions over land remain a challenge due to noise, and their coverage is limited to approximately 2 weeks or longer return times.

Building of effluence and environment monitoring capability of uranium mining and metallurgy in China

International Nuclear Information System (INIS)

Li Xianjie; Hu Penghua; Duan Jianchen; Xue Jianxin

2014-01-01

The status of effluence and environmental monitoring capability of nine uranium mining and metallurgy corporations in operation in China was investigated and analyzed. The results show that there exist some problems in all corporations such as imperfect monitoring plan, ineligible analyst, aging equipment, insufficient analysis capacity, lack of good detection limit. In order to solve the problems, several steps have been taken by Department of Safety and Environment Protection and Department of Geology and Mining (CNNC) in three years, including establishing three-level monitoring sys- tem, equipping corresponding monitoring instrument, holding three training classes, enhancing the analyst capacity, publishing the model for effluence and environment monitoring capability of uranium mining and metallurgy and carrying out comparison on monitoring of U and Ra in water, which greatly improved effluence and environment monitoring capability of uranium mining and metallurgy. (authors)

Turbulent current layer equilibrium and current layer of the Earth magnetotail

International Nuclear Information System (INIS)

Antonova, E.E.; Ovchinnikov, I.L.

1996-01-01

Analysis of distribution of plasma and magnetic field concentration in the unidimensional current layer under the condition of equality of the current inflowing into the layer and the counter diffusion current by various dependences of the regular velocity and the turbulent diffusion coefficient on the magnetic field. Corresponding two-dimensional solutions are obtained in the tail approximation. Comparison of the model turbulent current layer with characteristics of the plasma layer of the Earth magnetosphere tail is carried out. 16 refs., 3 figs

Irrigation Capability Evaluation of Illushi Floodplain, Edo State, Nigeria

Directory of Open Access Journals (Sweden)

A.S. Umweni

2014-06-01

Full Text Available Many irrigation projects, especially in the developing tropical regions, are embarked upon without any land capability assessment, resulting in avoidable and undesirable ecological consequences. The aim of this study is to assess the irrigation capability potentials of the soils of a rice growing Illushi/Ega community in Edo State of Nigeria. Soils of Illushi/Ega (200 ha were studied to establish their irrigation capabilities. Water samples were collected from the rivers within and near the sites at the proposed points of intake structures and analyzed for salinity (ECw, permeability (SAR and ion toxicity [Chlorine (Cl and Boron (B]. Gravity irrigation suitability assessment was carried out following the guidelines of the United States Bureau for Land Reclamation (USBR, 1953 and FAO (1979. Results showed that about 5.5 % of the land was non-irrigable, 11.5 % was marginally irrigable, 30.5% was moderately irrigable and 52.5 % highly irrigable.Thus about 83 % of the total land area was found to be irrigable. The results of analyses of irrigation water [ECw, SAR and Cl and B (ion toxicity problems in water sources were 0.1 – 0.7 dS m-1, 1.2 – 1.7, 0.6 – 1.8 cmol kg-1 and 0.5 – 0.7 mg kg-1] also show that there is no indication of salinity or ion toxicity problem.

Measurement capabilities of the Bendix Metrology Organization

International Nuclear Information System (INIS)

Barnes, L.M.

1984-01-01

The purpose of this manual is to communicate the measurement and calibration capabilities of the Metrology Organization of the Bendix Kansas City Division. Included is a listing of the measurement types and ranges available, and the accuracies normally attainable under conditions at the Kansas City Division. Also described are currently used standards and measurement devices. The manual is divided into four major sections, each describing a broad general area of measurement: mechanical; environmental, gas, liquid; electrical; and optical and radiation

Carry-Over Effects on the Annual Cycle of a Migratory Seabird: an Experimental Study

OpenAIRE

Fayet, Annette; Freeman, R; Shoji, A; Kirk, HL; Padget, O; Perrins, CM; Guilford, T

2016-01-01

1. Long-lived migratory animals must balance the cost of current reproduction with their own condition ahead of a challenging migration and future reproduction. In these species, carry-over effects, which occur when events in one season affect the outcome of the subsequent season, may be particularly exacerbated. However, how carry-over effects influence future breeding outcomes and whether (and how) they also affect behaviour during migration and wintering is unclear. 2. Here we inve...

PROGRAMS WITH DATA MINING CAPABILITIES

Directory of Open Access Journals (Sweden)

Ciobanu Dumitru

2012-03-01

Full Text Available The fact that the Internet has become a commodity in the world has created a framework for anew economy. Traditional businesses migrate to this new environment that offers many features and options atrelatively low prices. However competitiveness is fierce and successful Internet business is tied to rigorous use of allavailable information. The information is often hidden in data and for their retrieval is necessary to use softwarecapable of applying data mining algorithms and techniques. In this paper we want to review some of the programswith data mining capabilities currently available in this area.We also propose some classifications of this softwareto assist those who wish to use such software.

Developing Alliance Capabilities

DEFF Research Database (Denmark)

Heimeriks, Koen H.; Duysters, Geert; Vanhaverbeke, Wim

This paper assesses the differential performance effects of learning mechanisms on the development of alliance capabilities. Prior research has suggested that different capability levels could be identified in which specific intra-firm learning mechanisms are used to enhance a firm's alliance...

Synthetic aperture radar capabilities in development

Energy Technology Data Exchange (ETDEWEB)

Miller, M. [Lawrence Livermore National Lab., CA (United States)

1994-11-15

The Imaging and Detection Program (IDP) within the Laser Program is currently developing an X-band Synthetic Aperture Radar (SAR) to support the Joint US/UK Radar Ocean Imaging Program. The radar system will be mounted in the program`s Airborne Experimental Test-Bed (AETB), where the initial mission is to image ocean surfaces and better understand the physics of low grazing angle backscatter. The Synthetic Aperture Radar presentation will discuss its overall functionality and a brief discussion on the AETB`s capabilities. Vital subsystems including radar, computer, navigation, antenna stabilization, and SAR focusing algorithms will be examined in more detail.

Leadership capabilities of physiotherapy leaders in Ireland: Part 1 physiotherapy managers.

Science.gov (United States)

McGowan, Emer; Elliott, Naomi; Stokes, Emma

2018-05-07

Investigation of the leadership capabilities of physiotherapists is needed to allow understanding of current leadership practice and to enable appropriate training programs to be developed. To explore physiotherapy managers´ perceptions of their leadership capabilities. Semi-structured interviews were conducted with a purposive sample of 18 physiotherapy managers from a range of public services and private practices in Ireland. The interviews were analyzed using template analysis and the coding template was based on the Bolman and Deal Leadership framework which details four leadership frames: structural, human resource, political, and symbolic. The physiotherapy managers described demonstrating leadership capabilities associated with each of the four leadership frames. However, the language used by the physiotherapy managers suggested that they work predominantly through the structural and human resource frames. The employment of capabilities associated with the political frame varied between participants; some participants described working through this frame while others reported difficulties. The symbolic frame was underused; there were fewer examples given of capabilities such as communicating their vision, demonstrating passion and facilitating a positive workplace culture. Physiotherapy managers work predominantly through the structural and human resource frames. To successfully meet the leadership requirements of their roles physiotherapy managers may benefit from specific leadership development training to develop leadership capabilities in the political and symbolic frames.

Capability of Raman lidar for monitoring the variation of atmospheric CO2 profile

International Nuclear Information System (INIS)

Zhao Peitao; Hu Shunxing; Su Jia; Cao Kaifa; Hu Huanling; Zhang Yinchao; Wang Lian; Zhao Yuefeng

2008-01-01

Lidar (Light detection and ranging) has special capabilities for remote sensing of many different behaviours of the atmosphere. One of the techniques which show a great deal of promise for several applications is Raman scattering. The detecting capability, including maximum operation range and minimum detectable gas concentration is one of the most significant parameters for lidar remote sensing of pollutants. In this paper, based on the new method for evaluating the capabilities of a Raman lidar system, we present an evaluation of detecting capability of Raman lidar for monitoring atmospheric CO 2 in Hefei. Numerical simulations about the influence of atmospheric conditions on lidar detecting capability were carried out, and a conclusion can be drawn that the maximum difference of the operation ranges caused by the weather conditions alone can reach about 0.4 to 0.5km with a measuring precision within 30ppmv. The range of minimum detectable concentration caused by the weather conditions alone can reach about 20 to 35 ppmv in vertical direction for 20000 shots at a distance of 1 km on the assumption that other parameters are kept constant. The other corresponding parameters under different conditions are also given. The capability of Raman lidar operated in vertical direction was found to be superior to that operated in horizontal direction. During practical measurement with the Raman lidar whose hardware components were fixed, aerosol scattering extinction effect would be a significant factor that influenced the capability of Raman lidar. This work may be a valuable reference for lidar system designing, measurement accuracy improving and data processing

Current leads for superconducting magnets

International Nuclear Information System (INIS)

Ishibashi, Kenji

1989-01-01

Current leads for superconducting magnets have been studied since 1960's. The technology of current leads may seem to have been established both in theory and experiment before the middle of 1970's. Nevertheless, a wide variety of superconducting magnets have been introduced in the last 15 years, and the demands for special current leads have increased in accordance to the variety. A steady advance has been made in the design theory and fabrication of current leads. This paper describes the recent current lead technology regarding the design theory, safety in accidents, and high current capability. (author)

Capabilities, innovation, and overall performance in Brazilian export firms.

Directory of Open Access Journals (Sweden)

José Ednilson de Oliveira Cabral

2015-06-01

Full Text Available This article extends the current research on innovation by investigating the relationship between innovative capabilities and export firms’ overall performance. From the perspectives of the resource-based view (RBV and dynamic capability, we examine the differential and interactive effects of exploration and exploitation capabilities in product innovation for external markets and overall performance (direct and mediated by a new product. In addition, we test the moderating effect of market dynamism and the controlling effect of firm size on these relationships. Hence, the main contribution of this article is developing and empirically testing an original model, by combining these constructs that address new relationships, in an emerging country. This model was tested with data from 498 Brazilian export firms, distributed throughout all Brazilian manufacturing sectors, by firm size, and in states. The analysis was made with application of the structural equation modeling (SEM. As a result, we found support for the assumptions that exploitation capabilities influence product innovation and overall performance, whereas exploration capabilities and their interaction to exploitation capabilities influence overall performance, but not product innovation. Additionally, the relationship between exploitation capabilities and overall performance is mediated by product innovation. Unlike hypothesized, market dynamism does not moderate the relationship between product innovation and overall performance. Furthermore, firm size works as a controlling variable in the relationships analyzed. Regarding the implications for theory, this study contributes to grasp that exploitation capabilities influences a firm’s overall performance, both directly and indirectly (via product innovation, and highlights the various direct and mediatory effects of innovation on overall performance. These insights show the importance of considering the role of mediating and

Testing of high current by-pass diodes for the LHC magnet quench protection

International Nuclear Information System (INIS)

Berland, V.; Hagedorn, D.; Rodriguez-Mateos, F.

1996-01-01

Within the framework of the Large Hadron Collider (LHC) R and D program, CERN is performing experiments to establish the current carrying capability of irradiated diodes at liquid Helium temperatures for the superconducting magnet protection. Even if the diodes are degraded by radiation dose and neutron fluence, they must be able to support the by-pass current during a magnet quench and the de-excitation of the superconducting magnet ring. During this discharge, the current in the diode reaches a maximum value up to 13 kA and decreased with an exponential time constant of 100 s. Two sets of 75 mm wafer diameter epitaxial diodes, one irradiated and one non-irradiated, were submitted to this experiment. The irradiated diodes have been exposed to radiation in the accelerator environment up to 20 kGy and then annealed at room temperature. After the radiation exposure the diodes had shown a degradation of forward voltage of 50% which reduced to about 14% after the thermal annealing. During the long duration high current tests, one of the diodes was destroyed and the other two irradiated diodes showed a different behavior compared with non-irradiated diodes

Managing Human Resource Capabilities for Sustainable Competitive Advantage: An Empirical Analysis from Indian Global Organisations

Science.gov (United States)

Khandekar, Aradhana; Sharma, Anuradha

2005-01-01

Purpose: The purpose of this article is to examine the role of human resource capability (HRC) in organisational performance and sustainable competitive advantage (SCA) in Indian global organisations. Design/Methodology/Approach: To carry out the present study, an empirical research on a random sample of 300 line or human resource managers from…

Relaxation phenomena in current-carrying toroidal plasmas

International Nuclear Information System (INIS)

Yoshida, Zensho

1986-01-01

A theory of intrinsic dissipative structure is developed, which is to analyze the decay of a dissipative dynamical system. The theory is applied to the study of stable equilibria in magnetohydrodynamic (MHD) systems. Special sets of MHD equilibria are characterized as attractors of MHD systems, and they are shown to be classified into four classes, which cover wide range of experimentally observed MHD equilibria. (author)

A. C. losses in current-carrying superconductors

Energy Technology Data Exchange (ETDEWEB)

De Reuver, J L

1985-01-01

After a description of some basic concepts of superconductivity and the applied wire types, the basic measuring technique is dealt with. The performed measurements are given. The modification of the measuring technique will be explained. The prior interest is the theoretical description and the agreement between theory and experiment. Attention to various external field conditions is given, and to the self-field instability. Apart from theoretical considerations, measurements have been performed on types of wire which are less conventional. The intention is to contribute to the search for a type of wire with both low losses and a good stabilization under self-field conditions. The evaluation and conclusions concentrate on the developed measuring techniques, significant contributions to the theoretical verification and the proposed alternative wire configuration. (J.C.R.)

Scientific user facilities at Oak Ridge National Laboratory: New research capabilities and opportunities

Science.gov (United States)

Roberto, James

2011-10-01

Over the past decade, Oak Ridge National Laboratory (ORNL) has transformed its research infrastructure, particularly in the areas of neutron scattering, nanoscale science and technology, and high-performance computing. New facilities, including the Spallation Neutron Source, Center for Nanophase Materials Sciences, and Leadership Computing Facility, have been constructed that provide world-leading capabilities in neutron science, condensed matter and materials physics, and computational physics. In addition, many existing physics-related facilities have been upgraded with new capabilities, including new instruments and a high- intensity cold neutron source at the High Flux Isotope Reactor. These facilities are operated for the scientific community and are available to qualified users based on competitive peer-reviewed proposals. User facilities at ORNL currently welcome more than 2,500 researchers each year, mostly from universities. These facilities, many of which are unique in the world, will be reviewed including current and planned research capabilities, availability and operational performance, access procedures, and recent research results. Particular attention will be given to new neutron scattering capabilities, nanoscale science, and petascale simulation and modeling. In addition, user facilities provide a portal into ORNL that can enhance the development of research collaborations. The spectrum of partnership opportunities with ORNL will be described including collaborations, joint faculty, and graduate research and education.

NASA's Space Launch System: An Enabling Capability for International Exploration

Science.gov (United States)

Creech, Stephen D.; May, Todd A.; Robinson, Kimberly F.

2014-01-01

As the program moves out of the formulation phase and into implementation, work is well underway on NASA's new Space Launch System, the world's most powerful launch vehicle, which will enable a new era of human exploration of deep space. As assembly and testing of the rocket is taking place at numerous sites around the United States, mission planners within NASA and at the agency's international partners continue to evaluate utilization opportunities for this ground-breaking capability. Developed with the goals of safety, affordability, and sustainability in mind, the SLS rocket will launch the Orion Multi-Purpose Crew Vehicle (MPCV), equipment, supplies, and major science missions for exploration and discovery. NASA is developing this new capability in an austere economic climate, a fact which has inspired the SLS team to find innovative solutions to the challenges of designing, developing, fielding, and operating the largest rocket in history, via a path that will deliver an initial 70 metric ton (t) capability in December 2017 and then continuing through an incremental evolutionary strategy to reach a full capability greater than 130 t. SLS will be enabling for the first missions of human exploration beyond low Earth in almost half a century, and from its first crewed flight will be able to carry humans farther into space than they have ever voyaged before. In planning for the future of exploration, the International Space Exploration Coordination Group, representing 12 of the world's space agencies, has created the Global Exploration Roadmap, which outlines paths toward a human landing on Mars, beginning with capability-demonstrating missions to the Moon or an asteroid. The Roadmap and corresponding NASA research outline the requirements for reference missions for these destinations. SLS will offer a robust way to transport international crews and the air, water, food, and equipment they would need for such missions.

Key Future Engineering Capabilities for Human Capital Retention

Science.gov (United States)

Sivich, Lorrie

Projected record retirements of Baby Boomer generation engineers have been predicted to result in significant losses of mission-critical knowledge in space, national security, and future scientific ventures vital to high-technology corporations. No comprehensive review or analysis of engineering capabilities has been performed to identify threats related to the specific loss of mission-critical knowledge posed by the increasing retirement of tenured engineers. Archival data from a single diversified Fortune 500 aerospace manufacturing engineering company's engineering career database were analyzed to ascertain whether relationships linking future engineering capabilities, engineering disciplines, and years of engineering experience could be identified to define critical knowledge transfer models. Chi square, logistic, and linear regression analyses were used to map patterns of discipline-specific, mission-critical knowledge using archival data of engineers' perceptions of engineering capabilities, key developmental experiences, and knowledge learned from their engineering careers. The results from the study were used to document key engineering future capabilities. The results were then used to develop a proposed human capital retention plan to address specific key knowledge gaps of younger engineers as veteran engineers retire. The potential for social change from this study involves informing leaders of aerospace engineering corporations on how to build better quality mentoring or succession plans to fill the void of lost knowledge from retiring engineers. This plan can secure mission-critical knowledge for younger engineers for current and future product development and increased global competitiveness in the technology market.

Sound insulation property of membrane-type acoustic metamaterials carrying different masses at adjacent cells

Science.gov (United States)

Zhang, Yuguang; Wen, Jihong; Zhao, Honggang; Yu, Dianlong; Cai, Li; Wen, Xisen

2013-08-01

We present the experimental realization and theoretical understanding of membrane-type acoustic metamaterials embedded with different masses at adjacent cells, capable of increasing the transmission loss at low frequency. Owing to the reverse vibration of adjacent cells, Transmission loss (TL) peaks appear, and the magnitudes of the TL peaks exceed the predicted results of the composite wall. Compared with commonly used configuration, i.e., all cells carrying with identical mass, the nonuniformity of attaching masses causes another much low TL peak. Finite element analysis was employed to validate and provide insights into the TL behavior of the structure.

Transforming organizational capabilities in strategizing

DEFF Research Database (Denmark)

Jørgensen, Claus; Friis, Ole Uhrskov; Koch, Christian

2014-01-01

Offshored and networked enterprises are becoming an important if not leading organizational form and this development seriously challenges their organizational capabilities. More specifically, over the last years, SMEs have commenced entering these kinds of arrangements. As the organizational...... capabilities of SMEs are limited at the outset, even more emphasis is needed regarding the issues of developing relevant organizational capabilities. This paper aims at investigating how capabilities evolve during an offshoring process of more than 5 years in two Danish SMEs, i.e. not only short- but long......-term evolvements within the companies. We develop our framework of understanding organizational capabilities drawing on dynamic capability, relational capability and strategy as practice concepts, appreciating the performative aspects of developing new routines. Our two cases are taken from one author’s Ph...

Nuclear Data Needs and Capabilities for Applications

International Nuclear Information System (INIS)

Brown, D.

2015-01-01

In July 2014, DOE NP carried out a review of the US Nuclear Data Program. This led to several recommendations, including that the USNDP should 'devise effective and transparent mechanisms to solicit input and feedback from all stakeholders on nuclear data needs and priorities. The review also recommended that USNDP pursue experimental activities of relevance to nuclear data; the revised 2014 Mission Statement accordingly states that the USNDP uses 'targeted experimental studies' to address gaps in nuclear data. In support of these recommendations, DOE NP requested that USNDP personnel organize a Workshop on Nuclear Data Needs and Capabilities for Applications (NDNCA). This Workshop was held at Lawrence Berkeley National Laboratory (LBNL) on 27-29 May 2015. The goal of the NDNCA Workshop was to compile nuclear data needs across a wide spectrum of applied nuclear science, and to provide a summary of associated capabilities (accelerators, reactors, spectrometers, etc.) available for the required measurements. The first two days of the workshop consisted of 25 plenary talks by speakers from 16 different institutions, on Nuclear Energy, national security (NS), isotope production (IP), and industrial applications (IA). There were also shorter 'capabilities' talks that described the experimental facilities and instrumentation available for the measurement of nuclear data. This was followed by a third day of topic-specific 'breakout' sessions and a final closeout session. The agenda and copies of these talks are available online at http://bang.berkeley.edu/events/NDNCA/agenda. The importance of nuclear data to both basic and applied nuclear science was reflected in the fact that while the impetus for the workshop arose from the 2014 USNDP review, joint sponsorship for the workshop was provided by the Nuclear Science and Security Consortium, a UC-Berkeley based organization funded by the National Nuclear Security Administration (NNSA).

First Materials Science Research Facility Rack Capabilities and Design Features

Science.gov (United States)

Cobb, S.; Higgins, D.; Kitchens, L.; Curreri, Peter (Technical Monitor)

2002-01-01

The first Materials Science Research Rack (MSRR-1) is the primary facility for U.S. sponsored materials science research on the International Space Station. MSRR-1 is contained in an International Standard Payload Rack (ISPR) equipped with the Active Rack Isolation System (ARIS) for the best possible microgravity environment. MSRR-1 will accommodate dual Experiment Modules and provide simultaneous on-orbit processing operations capability. The first Experiment Module for the MSRR-1, the Materials Science Laboratory (MSL), is an international cooperative activity between NASA's Marshall Space Flight Center (MSFC) and the European Space Agency's (ESA) European Space Research and Technology Center (ESTEC). The MSL Experiment Module will accommodate several on-orbit exchangeable experiment-specific Module Inserts which provide distinct thermal processing capabilities. Module Inserts currently planned for the MSL are a Quench Module Insert, Low Gradient Furnace, and a Solidification with Quench Furnace. The second Experiment Module for the MSRR-1 configuration is a commercial device supplied by MSFC's Space Products Development (SPD) Group. Transparent furnace assemblies include capabilities for vapor transport processes and annealing of glass fiber preforms. This Experiment Module is replaceable on-orbit. This paper will describe facility capabilities, schedule to flight and research opportunities.

Systems Engineering for Space Exploration Medical Capabilities

Science.gov (United States)

Mindock, Jennifer; Reilly, Jeffrey; Rubin, David; Urbina, Michelle; Hailey, Melinda; Hanson, Andrea; Burba, Tyler; McGuire, Kerry; Cerro, Jeffrey; Middour, Chris;

Short term braking capability during power interruptions for integrated matrix converter

DEFF Research Database (Denmark)

Klumpner, Christian; Blaabjerg, Frede

2004-01-01

attractive. Sinusoidal input currents and bi-directional power flow are other advantages of the matrix converter, but it is less immune to power grid disturbances compared to a standard ASD. In hoisting applications, short-term braking capability during a power outage is needed until the mechanical brake...... engages or to perform more effective a combined braking. This paper proposes a new method to provide short-term braking capability during a power outage for matrix converters. A braking chopper is needed in the clamp circuit, which allows for a drastically reduction of the capacitor size. The power flow...

Rethinking capacity building for knowledge mobilisation: developing multilevel capabilities in healthcare organisations.

Science.gov (United States)

Kislov, Roman; Waterman, Heather; Harvey, Gill; Boaden, Ruth

2014-11-15

Knowledge mobilisation in healthcare organisations is often carried out through relatively short-term projects dependent on limited funding, which raises concerns about the long-term sustainability of implementation and improvement. It is becoming increasingly recognised that the translation of research evidence into practice has to be supported by developing the internal capacity of healthcare organisations to engage with and apply research. This process can be supported by external knowledge mobilisation initiatives represented, for instance, by professional associations, collaborative research partnerships and implementation networks. This conceptual paper uses empirical and theoretical literature on organisational learning and dynamic capabilities to enhance our understanding of intentional capacity building for knowledge mobilisation in healthcare organisations. The discussion is structured around the following three themes: (1) defining and classifying capacity building for knowledge mobilisation; (2) mechanisms of capability development in organisational context; and (3) individual, group and organisational levels of capability development. Capacity building is presented as a practice-based process of developing multiple skills, or capabilities, belonging to different knowledge domains and levels of complexity. It requires an integration of acquisitive learning, through which healthcare organisations acquire knowledge and skills from knowledge mobilisation experts, and experience-based learning, through which healthcare organisations adapt, absorb and modify their knowledge and capabilities through repeated practice. Although the starting point for capability development may be individual-, team- or organisation-centred, facilitation of the transitions between individual, group and organisational levels of learning within healthcare organisations will be needed. Any initiative designed to build capacity for knowledge mobilisation should consider the

Conceptualising energy use and energy poverty using a capabilities framework

International Nuclear Information System (INIS)

Day, Rosie; Walker, Gordon; Simcock, Neil

2016-01-01

In this article we conceptualise energy use from a capabilities perspective, informed by the work of Amartya Sen, Martha Nussbaum and others following them. Building on this, we suggest a corresponding definition of energy poverty, as understood in the capabilities space. We argue that such an understanding provides a theoretically coherent means of comprehending the relationship between energy and wellbeing, and thus conceptualising energy deprivation, that makes sense across settings including both the global North and South: a coherence which has previously been lacking. At the same time, it has the flexibility to be deployed in a way that is sensitive to local contexts. Understanding energy use in the capabilities space also provides a means for identifying multiple sites of intervention, including some areas that are currently largely overlooked. We argue that this is advantageous for attempts to address energy poverty in the context of climate change and imperatives for the containment of aggregate energy consumption. - Highlights: •We apply the capabilities approach of Amartya Sen and Martha Nussbaum to conceptualising why energy is used and needed. •We propose a definition of energy poverty based on the capabilities approach. •We argue that this understanding integrates approaches to energy poverty from global North and South contexts. •The proposed definition of energy poverty is multi-dimensional. •This understanding opens new conceptual space for interventions to alleviate energy poverty.

Development of Uranium-Carrying Ball method for calibration of fuel element failure detecting systems

International Nuclear Information System (INIS)

Liu Yupu; Bao Wanping; Lu Cungang

1988-01-01

A Uranium-Carrying Ball method used for the determination of sensitivity, stability of the fuel element failure detecting systems is developed. A special facility for transporting the ball can be carried out by the flow of the cooling water, so that the failure signal can be simulated. Five different types of the Uranium-Carrying Ball have been developed. Type-I to Type-IV may provide failure signal in terms of uranium quantity or exposure area of uranium. Type-V can be used to simulate micro-flaw and examine the detectability of various detective methods for this kind of defect, at the same time it is difficult for the delayed neutron detector to detect micro-flaw. The results of long-time irradiation and washing test show that the working life of the balls is satisfactory. Using the experimentel facility with the balls, detailed study of the capability of various fuel failure detecting systems have been conducted successfully. The operation is easy and safe, the accuracy of this method is higher than that of other methods, the nuclear fuel consumption as well as the radioactive contamination is low. At present, the research on the failure mechanism is being conducted by means of this method

COMPUTER SUPPORT SYSTEMS FOR ESTIMATING CHEMICAL TOXICITY: PRESENT CAPABILITIES AND FUTURE TRENDS

Science.gov (United States)

Computer Support Systems for Estimating Chemical Toxicity: Present Capabilities and Future Trends A wide variety of computer-based artificial intelligence (AI) and decision support systems exist currently to aid in the assessment of toxicity for environmental chemicals. T...

How Stakeholder Sensing and Anticipations Shape the Firm’s Strategic Response Capability

DEFF Research Database (Denmark)

Hallin, Carina Antonia; Andersen, Torben Juul; Ooi, Can-Seng

We outline a strategic response capability framework drawing on cognitive neuroscience to explain stakeholder sensing and anticipations as essential input to environmental analysis. Stakeholders receive stimuli from ongoing interactions with the firm and thereby sense current environmental changes...

Status of high temperature superconductor cable and fault current limiter projects at American Superconductor

International Nuclear Information System (INIS)

Maguire, J.F.; Yuan, J.

2009-01-01

This paper will describe the status of three key programs currently underway at American Superconductor Corp. The first program is the LIPA project which is a transmission voltage high temperature superconducting cable program, with funding support from the US Department of Energy. The 600 m cable, capable of carrying 574 MVA, was successfully installed and commissioned in LIPA grid on April 22, 2008. An overview of the project, system level design details and operational data will be provided. In addition, the status of the newly awarded LIPA II project will be described. The second program is Project Hydra, with funding support from the US Department of Homeland Security, to design, develop and demonstrate an HTS cable with fault current limiting functionality. The cable is 300 m long and is being designed to carry 96 MVA at a distribution level voltage of 13.8 kV. The cable will be permanently installed and energized in Manhattan, New York in 2010. The initial status of Project Hydra will be presented. The final program to be discussed is a transmission voltage, high temperature superconducting fault current limiter funded by the US DOE. The project encompasses the design, construction and test of a 115 kV FCL for power transmission within a time frame of 4-5 years. Installation and testing are planned for a Southern California Edison substation. A project overview and progress under the first phase will be reported.

Status of high temperature superconductor cable and fault current limiter projects at American Superconductor

Energy Technology Data Exchange (ETDEWEB)

Maguire, J.F., E-mail: jmaguire@amsc.co [American Superconductor Co., 64 Jackson Road, Devens, MA 01434 (United States); Yuan, J. [American Superconductor Co., 64 Jackson Road, Devens, MA 01434 (United States)

2009-10-15

This paper will describe the status of three key programs currently underway at American Superconductor Corp. The first program is the LIPA project which is a transmission voltage high temperature superconducting cable program, with funding support from the US Department of Energy. The 600 m cable, capable of carrying 574 MVA, was successfully installed and commissioned in LIPA grid on April 22, 2008. An overview of the project, system level design details and operational data will be provided. In addition, the status of the newly awarded LIPA II project will be described. The second program is Project Hydra, with funding support from the US Department of Homeland Security, to design, develop and demonstrate an HTS cable with fault current limiting functionality. The cable is 300 m long and is being designed to carry 96 MVA at a distribution level voltage of 13.8 kV. The cable will be permanently installed and energized in Manhattan, New York in 2010. The initial status of Project Hydra will be presented. The final program to be discussed is a transmission voltage, high temperature superconducting fault current limiter funded by the US DOE. The project encompasses the design, construction and test of a 115 kV FCL for power transmission within a time frame of 4-5 years. Installation and testing are planned for a Southern California Edison substation. A project overview and progress under the first phase will be reported.

Status of high temperature superconductor cable and fault current limiter projects at American Superconductor

Science.gov (United States)

Maguire, J. F.; Yuan, J.

2009-10-01

This paper will describe the status of three key programs currently underway at American Superconductor Corp. The first program is the LIPA project which is a transmission voltage high temperature superconducting cable program, with funding support from the US Department of Energy. The 600 m cable, capable of carrying 574 MVA, was successfully installed and commissioned in LIPA grid on April 22, 2008. An overview of the project, system level design details and operational data will be provided. In addition, the status of the newly awarded LIPA II project will be described. The second program is Project Hydra, with funding support from the US Department of Homeland Security, to design, develop and demonstrate an HTS cable with fault current limiting functionality. The cable is 300 m long and is being designed to carry 96 MVA at a distribution level voltage of 13.8 kV. The cable will be permanently installed and energized in Manhattan, New York in 2010. The initial status of Project Hydra will be presented. The final program to be discussed is a transmission voltage, high temperature superconducting fault current limiter funded by the US DOE. The project encompasses the design, construction and test of a 115 kV FCL for power transmission within a time frame of 4-5 years. Installation and testing are planned for a Southern California Edison substation. A project overview and progress under the first phase will be reported.

A business analytics capability framework

Directory of Open Access Journals (Sweden)

Ranko Cosic

2015-09-01

Full Text Available Business analytics (BA capabilities can potentially provide value and lead to better organisational performance. This paper develops a holistic, theoretically-grounded and practically relevant business analytics capability framework (BACF that specifies, defines and ranks the capabilities that constitute an organisational BA initiative. The BACF was developed in two phases. First, an a priori conceptual framework was developed based on the Resource-Based View theory of the firm and a thematic content analysis of the BA literature. Second, the conceptual framework was further developed and refined using a three round Delphi study involving 16 BA experts. Changes from the Delphi study resulted in a refined and confirmed framework including detailed capability definitions, together with a ranking of the capabilities based on importance. The BACF will help academic researchers and industry practitioners to better understand the capabilities that constitute an organisational BA initiative and their relative importance. In future work, the capabilities in the BACF will be operationalised to measure their as-is status, thus enabling organisations to identify key areas of strength and weakness and prioritise future capability improvement efforts.

Sensor Alerting Capability

Science.gov (United States)

Henriksson, Jakob; Bermudez, Luis; Satapathy, Goutam

2013-04-01

There is a large amount of sensor data generated today by various sensors, from in-situ buoys to mobile underwater gliders. Providing sensor data to the users through standardized services, language and data model is the promise of OGC's Sensor Web Enablement (SWE) initiative. As the amount of data grows it is becoming difficult for data providers, planners and managers to ensure reliability of data and services and to monitor critical data changes. Intelligent Automation Inc. (IAI) is developing a net-centric alerting capability to address these issues. The capability is built on Sensor Observation Services (SOSs), which is used to collect and monitor sensor data. The alerts can be configured at the service level and at the sensor data level. For example it can alert for irregular data delivery events or a geo-temporal statistic of sensor data crossing a preset threshold. The capability provides multiple delivery mechanisms and protocols, including traditional techniques such as email and RSS. With this capability decision makers can monitor their assets and data streams, correct failures or be alerted about a coming phenomena.

Eddy current testing

Energy Technology Data Exchange (ETDEWEB)

Song, Sung Jin; Lee, Hyang Beom; Kim, Young Hwan [Soongsil Univ., Seoul (Korea, Republic of); Shin, Young Kil [Kunsan Univ., Gunsan (Korea, Republic of)

2004-02-15

Eddy current testing has been widely used for non destructive testing of steam generator tubes. In order to retain reliability in ECT, the following subjects were carried out in this study: numerical modeling and analysis of defects by using BC and RPC probes in SG tube, preparation of absolute coil impedance plane diagram by FEM. Signal interpretation of the eddy current signals obtained from nuclear power plants.

Eddy current testing

International Nuclear Information System (INIS)

Song, Sung Jin; Lee, Hyang Beom; Kim, Young Hwan; Shin, Young Kil

2004-02-01

Eddy current testing has been widely used for non destructive testing of steam generator tubes. In order to retain reliability in ECT, the following subjects were carried out in this study: numerical modeling and analysis of defects by using BC and RPC probes in SG tube, preparation of absolute coil impedance plane diagram by FEM. Signal interpretation of the eddy current signals obtained from nuclear power plants

Social Capital, IT Capability, and the Success of Knowledge Management Systems

Directory of Open Access Journals (Sweden)

Irene Y.L. Chen

2009-03-01

Full Text Available Many organizations have implemented knowledge management systems to support knowledge management. However, many of such systems have failed due to the lack of relationship networks and IT capability within organizations. Motivated by such concerns, this paper examines the factors that may facilitate the success of knowledge management systems. The ten constructs derived from social capital theory, resource-based view and IS success model are integrated into the current research model. Twenty-one hypotheses derived from the research model are empirically validated using a field survey of KMS users. The results suggest that social capital and organizational IT capability are important preconditions of the success of knowledge management systems. Among the posited relationships, trust, social interaction ties, IT capability do not significantly impact service quality, system quality and IT capability, respectively. Against prior expectation, service quality and knowledge quality do not significantly influence perceived KMS benefits and user satisfaction, respectively. Discussion of the results and conclusion are provided. This study then provides insights for future research avenue.

Materials Capability Review Los Alamos National Laboratory May 4-7, 2009

Energy Technology Data Exchange (ETDEWEB)

Taylor, Antoniette J [Los Alamos National Laboratory

2009-01-01

Los Alamos National Laboratory (LANL) uses external peer review to measure and continuously improve the quality of its science, technology and engineering (STE). LANL uses capability reviews to assess the STE quality and institutional integration and to advise Laboratory Management on the current and future health of the STE. Capability reviews address the STE integration that LANL uses to meet mission requirements. STE capabilities are define to cut across directorates providing a more holistic view of the STE quality, integration to achieve mission requirements, and mission relevance. The scope of these capabilities necessitate that there will be significant overlap in technical areas covered by capability reviews (e.g ., materials research and weapons science and engineering). In addition, LANL staff may be reviewed in different capability reviews because of their varied assignments and expertise. LANL plans to perform a complete review of the Laboratory's STE capabilities (hence staff) in a three-year cycle. The principal product of an external review is a report that includes the review committee's assessments, commendations, and recommendations for STE. The Capability Review Committees serve a dual role of providing assessment of the Laboratory's technical contributions and integration towards its missions and providing advice to Laboratory Management. The assessments and advice are documented in reports prepared by the Capability Review Committees that are delivered to the Director and to the Principal Associate Director for Science, Technology and Engineering (PADSTE). This report will be used by Laboratory Management for STE assessment and planning. The report is also provided to the Department of Energy (DOE) as part of LANL's Annual Performance Plan and to the Los Alamos National Security (LANS) LLC's Science and Technology Committee (STC) as part of its responsibilities to the LANS Board of Governors. LANL has defined fourteen

Core Capabilities and Technical Enhancement -- FY-98 Annual Report

Energy Technology Data Exchange (ETDEWEB)

Miller, David Lynn

1999-04-01

The Core Capability and Technical Enhancement (CC&TE) Program, a part of the Verification, Validation, and Engineering Assessment Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening the technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Office of Environmental Management (EM). An analysis of EM's science and technology needs as well as the technology investments currently being made by EM across the complex was used to formulate a portfolio of research activities designed to address EM's needs without overlapping work being done elsewhere. An additional purpose is to enhance and maintain the technical capabilities and research infrastructure at the INEEL. This is a progress report for fiscal year 1998 for the five CC&TE research investment areas: (a) transport aspects of selective mass transport agents, (b) chemistry of environmental surfaces, (c) materials dynamics, (d) characterization science, and (e) computational simulation of mechanical and chemical systems. In addition to the five purely technical research areas, this report deals with the science and technology foundations element of the CC&TE from the standpoint of program management and complex-wide issues. This report also provides details of ongoing and future work in all six areas.

Core capabilities and technical enhancement, FY-98 annual report

Energy Technology Data Exchange (ETDEWEB)

Miller, D.L.

1999-04-01

The Core Capability and Technical Enhancement (CCTE) Program, a part of the Verification, Validation, and Engineering Assessment Program, was implemented to enhance and augment the technical capabilities of the Idaho National Engineering and Environmental Laboratory (INEEL). The purpose for strengthening the technical capabilities of the INEEL is to provide the technical base to serve effectively as the Environmental Management Laboratory for the Department of Energy's Office of Environmental Management (EM). An analysis of EM's science and technology needs as well as the technology investments currently being made by EM across the complex was used to formulate a portfolio of research activities designed to address EM's needs without overlapping work being done elsewhere. An additional purpose is to enhance and maintain the technical capabilities and research infrastructure at the INEEL. This is a progress report for fiscal year 1998 for the five CCTE research investment areas: (a) transport aspects of selective mass transport agents, (b) chemistry of environmental surfaces, (c) materials dynamics, (d) characterization science, and (e) computational simulation of mechanical and chemical systems. In addition to the five purely technical research areas, this report deals with the science and technology foundations element of the CCTE from the standpoint of program management and complex-wide issues. This report also provides details of ongoing and future work in all six areas.

Campus Capability Plan

Energy Technology Data Exchange (ETDEWEB)

Adams, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Arsenlis, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bailey, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bergman, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Brase, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Brenner, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Camara, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Carlton, H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Cheng, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chrzanowski, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Colson, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); East, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Farrell, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ferranti, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gursahani, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hansen, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Helms, L. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hernandez, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Jeffries, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Larson, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lu, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McNabb, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mercer, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Skeate, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sueksdorf, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zucca, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Le, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ancria, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Scott, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Leininger, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gagliardi, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gash, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bronson, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chung, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hobson, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meeker, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sanchez, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zagar, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Quivey, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sommer, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Atherton, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-06-06

Lawrence Livermore National Laboratory Campus Capability Plan for 2018-2028. Lawrence Livermore National Laboratory (LLNL) is one of three national laboratories that are part of the National Nuclear Security Administration. LLNL provides critical expertise to strengthen U.S. security through development and application of world-class science and technology that: Ensures the safety, reliability, and performance of the U.S. nuclear weapons stockpile; Promotes international nuclear safety and nonproliferation; Reduces global danger from weapons of mass destruction; Supports U.S. leadership in science and technology. Essential to the execution and continued advancement of these mission areas are responsive infrastructure capabilities. This report showcases each LLNL capability area and describes the mission, science, and technology efforts enabled by LLNL infrastructure, as well as future infrastructure plans.

THE MEANING OF LOGISTICS CAPABILITIES IN ACHIEVING THE MARKET SUCCESS BY A COMPANY

Directory of Open Access Journals (Sweden)

2011-12-01

Full Text Available Background: The symptom of the market success by a company is to reach the expected market effects (e.g. market share, customer satisfaction, customer loyalty as well as economic ones (e.g. profits, rentability, return on capital. As a result, the company may achieve a stable and long-term competitive advantage as well as strengthen its market position. Methods: The abilities to use existing resources, which play an important role in achieving a market success, can be divided into operational and dynamic ones. The logistics abilities are one of the most important ones for a company. The comparison of these two kinds of logistics capabilities are presented, compared and evaluated. Results: the role of logistics capabilities in achieving a market success by the company in light of the results of research carried out in the world, including Poland, was discussed, evaluated and confirmed. Conclusions: The influence of logistics capabilities on the market success of a company was confirmed. The development of an effective strategy and organization solutions in the logistics seems to be the most important process associated with the use of potentials (capabilities as well as resources and competencies and leading to achieving a market success of a company.

MARKETING CAPABILITIES FOR INNOVATION-BASED COMPETITIVE ADVANTAGE IN THE SLOVENIAN MARKET

Directory of Open Access Journals (Sweden)

Vojko Potocan

2013-01-01

Full Text Available The primary role of marketing within the competitive advantage is innovation. The customer value-based differentiation strategies will drive the company’s market research efforts, its selection of target markets, its product development processes, its market communications programs, and its delivery processes. These processes require many specific capabilities that enable the firm to carry out activities necessary to move its products or services through the value chain. We must explore the role of distinctive marketing capabilities in competitive strategy of the company. As sources of competitive advantage, companies try to create their product or service differentiation by developing higher product or service quality, by using their knowledge to solving marketing problems, by communicating with their customers, and by satisfying customer’s needs. We also would like to confirm that superior customer service lead to company’s innovation. The paper closes with the implications of the findings and highlights promising future research avenues.

Development of students learning capabilities and professional capabilities

DEFF Research Database (Denmark)

Ringtved, Ulla Lunde; Wahl, Christian; Belle, Gianna

This paper describes the work-in-progress on a project that aims todevelop a tool that via learning analytic methods enable studentsto enhance, document and assess the development of their learningcapabilities and professional capabilities in consequence of theirself-initiated study activities...... during their bachelor educations. Thetool aims at enhancing the development of students’ capabilities toself-initiate, self-regulate and self-assess their study activities.The tool uses the concept of collective intelligence as source formotivation and inspiration in self-initiating study activities...... as wellas self-assessing them. The tool is based on a heutagogical approachto support reflection on learning potential in these activities. Thisenhances the educational use of students self-initiated learningactivities by bringing visibility and evidence to them, and therebybringing value to the assessment...

Capitalizing on capabilities.

Science.gov (United States)

Ulrich, Dave; Smallwood, Norm

2004-06-01

By making the most of organizational capabilities--employees' collective skills and fields of expertise--you can dramatically improve your company's market value. Although there is no magic list of proficiencies that every organization needs in order to succeed, the authors identify 11 intangible assets that well-managed companies tend to have: talent, speed, shared mind-set and coherent brand identity, accountability, collaboration, learning, leadership, customer connectivity, strategic unity, innovation, and efficiency. Such companies typically excel in only three of these capabilities while maintaining industry parity in the other areas. Organizations that fall below the norm in any of the 11 are likely candidates for dysfunction and competitive disadvantage. So you can determine how your company fares in these categories (or others, if the generic list doesn't suit your needs), the authors explain how to conduct a "capabilities audit," describing in particular the experiences and findings of two companies that recently performed such audits. In addition to highlighting which intangible assets are most important given the organization's history and strategy, this exercise will gauge how well your company delivers on its capabilities and will guide you in developing an action plan for improvement. A capabilities audit can work for an entire organization, a business unit, or a region--indeed, for any part of a company that has a strategy to generate financial or customer-related results. It enables executives to assess overall company strengths and weaknesses, senior leaders to define strategy, midlevel managers to execute strategy, and frontline leaders to achieve tactical results. In short, it helps turn intangible assets into concrete strengths.

Maximum field capability of energy saver superconducting magnets

International Nuclear Information System (INIS)

Turkot, F.; Cooper, W.E.; Hanft, R.; McInturff, A.

1983-01-01

At an energy of 1 TeV the superconducting cable in the Energy Saver dipole magnets will be operating at ca. 96% of its nominal short sample limit; the corresponding number in the quadrupole magnets will be 81%. All magnets for the Saver are individually tested for maximum current capability under two modes of operation; some 900 dipoles and 275 quadrupoles have now been measured. The dipole winding is composed of four individually wound coils which in general come from four different reels of cable. As part of the magnet fabrication quality control a short piece of cable from both ends of each reel has its critical current measured at 5T and 4.3K. In this paper the authors describe and present the statistical results of the maximum field tests (including quench and cycle) on Saver dipole and quadrupole magnets and explore the correlation of these tests with cable critical current

Network Communication as a Service-Oriented Capability

Energy Technology Data Exchange (ETDEWEB)

Johnston, William; Johnston, William; Metzger, Joe; Collins, Michael; Burrescia, Joseph; Dart, Eli; Gagliardi, Jim; Guok, Chin; Oberman, Kevin; O' Conner, Mike

2008-01-08

In widely distributed systems generally, and in science-oriented Grids in particular, software, CPU time, storage, etc., are treated as"services" -- they can be allocated and used with service guarantees that allows them to be integrated into systems that perform complex tasks. Network communication is currently not a service -- it is provided, in general, as a"best effort" capability with no guarantees and only statistical predictability. In order for Grids (and most types of systems with widely distributed components) to be successful in performing the sustained, complex tasks of large-scale science -- e.g., the multi-disciplinary simulation of next generation climate modeling and management and analysis of the petabytes of data that will come from the next generation of scientific instrument (which is very soon for the LHC at CERN) -- networks must provide communication capability that is service-oriented: That is it must be configurable, schedulable, predictable, and reliable. In order to accomplish this, the research and education network community is undertaking a strategy that involves changes in network architecture to support multiple classes of service; development and deployment of service-oriented communication services, and; monitoring and reporting in a form that is directly useful to the application-oriented system so that it may adapt to communications failures. In this paper we describe ESnet's approach to each of these -- an approach that is part of an international community effort to have intra-distributed system communication be based on a service-oriented capability.

Empirical research on financial capability evaluation of A-share listed companies in the securities industry based on principal component analysis

Directory of Open Access Journals (Sweden)

Xiuping Wang

2017-11-01

Full Text Available Based on the relevant financial data indicators of A-share markets of Shanghai and Shenzhen in 2009, with all of 29 listed companies in the securities industry as the research objects, this paper selects 10variables that can fully reflect the financial capability indicators and uses the principal component analysis to carry out the empirical research on the financial capability. The research results show that the comprehensive financial capability of listed companies in A-share securities industry must be focused on the following four capabilities, investment and income, profit, capital composition and debt repayment and cash flow indicators. In addition, the principal component analysis can effectively evaluate the financial capability of listed companies in A-share securities industry, and solve the problems in the previous analysis methods, such as excessive indicators, information overlapping and so on.

An empirical model for salt removal percentage in water under the effect of different current intensities of current carrying coil at different flow rates

Directory of Open Access Journals (Sweden)

Rameen S. AbdelHady

2011-10-01

Full Text Available The magnetic treatment of hard water is an alternative, simple approach by which the hard water that needs to be treated flows through a magnetic field. This field is created by inducing current in a coil wrapped around a pipe. Consequently some of its properties, such as total dissolved salts (TDS, conductivity (Ec and PH change. The primary purpose of hard water treatment is to decrease TDS in the incoming liquid stream. Using performance data from the application of different magnetic field densities on the different flow levels of water, empirical mathematical models were developed relating the salt removal percentage (SRP to operating flow rate and current of the coil. The obtained experimental results showed that the SRP increased with increasing the current at low flow rates (up to 0.75 ml/s.

The evolution of alliance capabilities

NARCIS (Netherlands)

Heimeriks, K.H.; Duysters, G.M.; Vanhaverbeke, W.P.M.

2004-01-01

This paper assesses the effectiveness and differential performance effects of learning mechanisms on the evolution of alliance capabilities. Relying on the concept of capability lifecycles, prior research has suggested that different capability levels could be identified in which different

Partnership for the Revitalization of National Wind Tunnel Force Measurement Capability

Science.gov (United States)

Rhew, Ray D.; Skelley, Marcus L.; Woike, Mark R.; Bader, Jon B.; Marshall, Timothy J.

2009-01-01

Lack of funding and lack of focus on research over the past several years, coupled with force measurement capabilities being decentralized and distributed across the National Aeronautics and Space Administration (NASA) research centers, has resulted in a significant erosion of (1) capability and infrastructure to produce and calibrate force measurement systems; (2) NASA s working knowledge of those systems; and (3) the quantity of high-quality, full-capability force measurement systems available for use in aeronautics testing. Simultaneously, and at proportional rates, the capability of industry to design, manufacture, and calibrate these test instruments has been eroding primarily because of a lack of investment by the aeronautics community. Technical expertise in this technology area is a core competency in aeronautics testing; it is highly specialized and experience-based, and it represents a niche market for only a few small precision instrument shops in the United States. With this backdrop, NASA s Aeronautics Test Program (ATP) chartered a team to examine the issues and risks associated with the problem, focusing specifically on strain- gage balances. The team partnered with the U.S. Air Force s Arnold Engineering Development Center (AEDC) to exploit their combined capabilities and take a national level government view of the problem. This paper describes the team s approach, its findings, and its recommendations, and the current status for revitalizing the government s balance capability with respect to designing, fabricating, calibrating, and using the instruments.

Coming of Age on a Shoestring Budget: Financial Capability and Financial Behaviors of Lower-Income Millennials.

Science.gov (United States)

West, Stacia; Friedline, Terri

2016-10-01

Lower-income millennials make important financial decisions that may affect their future financial well-being. With limited resources, this population is at risk for acquiring too much debt or being unprepared for a financial emergency that can send them further into poverty and constrain their ability to leverage resources for future economic mobility. A financial capability approach, an intervention that combines financial education with financial inclusion through the use of a savings account, may correlate with millennials’ healthy financial behaviors. This study used data from the 2012 National Financial Capability Study to examine the relationship between financial capability and the financial behaviors of lower-income millennials between the ages of 18 and 34 years (N = 2,578). Compared with those lower-income millennials who were financially excluded, those who were financially capable were also 171 percent more likely to afford an unexpected expense, 182 percent more likely to save for emergencies, and 34 percent less likely to carry too much debt, relating to their greater overall financial satisfaction. The findings of this study indicate that interventions that develop lower-income millennials’ financial capability may be effective for promoting healthy financial behaviors.

Optical Design Capabilities at Lawrence Livermore National Laboratory

International Nuclear Information System (INIS)

Lawson, J.K.

2002-01-01

Optical design capabilities continue to play the same strong role at Lawrence Livermore National Laboratory (LLNL) that they have played in the past. From defense applications to the solid-state laser programs to the Atomic Vapor Laser Isotope Separation (AVLIS), members of the optical design group played critical roles in producing effective system designs and are actively continuing this tradition. This talk will explain the role optical design plays at LLNL, outline current capabilities and summarize a few activities in which the optical design team has been recently participating. Among the many optical engineers working at LLNL, a distinct group exists which specializes in optical design issues. The optical design group collectively has a wide range of fields of expertise as well as a diversity of background histories including LLNL, university, industry and aerospace experience. This unique resource has resulted many effective and productive designs for customers at LLNL and outside the lab.

Capturing Firms’ Heterogeneity through Marketing and IT Capabilities in SMEs

Directory of Open Access Journals (Sweden)

María A. Ramón-Jerónimo

2017-11-01

Full Text Available To achieve sustainability, firms capable of surviving economic recessions is of key relevance; the capabilities that firms need to face dynamic environments remain an open question. In this work, a new procedure is proposed to capture firms’ heterogeneity with regard to the capabilities they possess in operating efficiently in dynamic environments. This approach enables the identification of the classes of firms that develop efficiency with a specific integration of resources. While the literature has most often measured firm capabilities using subjective measures, this study suggests the use of Data Envelopment Analysis to capture the ability to transform resources into outcomes and of Latent Class Regression to capture differences across firms that explain firms’ heterogeneity in the way they perform. By combining these two techniques, this work presents a way to identify those firms that need to invest in and develop certain capabilities. This work analyses a large dataset of manufacturing Small Medium Enterprises (SMEs extracted from the Business and Strategy survey provided by Fundación de la Sociedad Estatal de Participaciones Industriales( SEPI in Spain. The dataset used enfolds 10,960 observations from 2048 firms during the period 1994–2011. The complete dataset has been employed to calculate manufacturing firms’ efficiency. In a second step, data were cleaned to eliminate outliers, and to identify SMEs and observations with records of IT capabilities. As a result, 329 manufacturing SMEs were analysed to capture their heterogeneity. The results contribute to the current literature by explaining how manufacturing SMEs show a different need in their development of capabilities to be efficient and adapt to environmental changes. While approximately 20% of firms analysed really take advantage of recessions through their investment in R&D, the remaining 80% need to adjust their size or invest in IT capabilities to become competitive

Aquantis Ocean Current Turbine Development Project Report

Energy Technology Data Exchange (ETDEWEB)

Fleming, Alex J.

2014-08-23

The Aquantis® Current Plane (“C-Plane”) technology developed by Dehlsen Associates, LLC (DA) and Aquantis, Inc. is an ocean current turbine designed to extract kinetic energy from ocean currents. The technology is capable of achieving competitively priced base-load, continuous, and reliable power generation from a source of renewable energy not before possible in this scale or form.

Measurement technology of RF interference current in high current system

Science.gov (United States)

Zhao, Zhihua; Li, Jianxuan; Zhang, Xiangming; Zhang, Lei

2018-06-01

Current probe is a detection method commonly used in electromagnetic compatibility. With the development of power electronics technology, the power level of power conversion devices is constantly increasing, and the power current of the electric energy conversion device in the electromagnetic launch system can reach 10kA. Current probe conventionally used in EMC (electromagnetic compatibility) detection cannot meet the test requirements on high current system due to the magnetic saturation problem. The conventional high current sensor is also not suitable for the RF (Radio Frequency) interference current measurement in high current power device due to the high noise level in the output of active amplifier. In this paper, a passive flexible current probe based on Rogowski coil and matching resistance is proposed that can withstand high current and has low noise level, to solve the measurement problems of interference current in high current power converter. And both differential mode and common mode current detection can be easily carried out with the proposed probe because of the probe's flexible structure.

Brandishing Cyberattack Capabilities

Science.gov (United States)

2013-01-01

Advertising cyberwar capabilities may be helpful. It may back up a deterrence strategy. It might dissuade other states from conventional mischief or...to enable the attack.5 Many of the instruments of the attack remain with the target system, nestled in its log files, or even in the malware itself...debat- able. Even if demonstrated, what worked yesterday may not work today. But difficult does not mean impossible. Advertising cyberwar capabilities

Energetics of load carrying in Nepalese porters.

Science.gov (United States)

Bastien, Guillaume J; Schepens, Bénédicte; Willems, Patrick A; Heglund, Norman C

2005-06-17

Nepalese porters routinely carry head-supported loads equal to 100 to 200% of their body weight (Mb) for many days up and down steep mountain footpaths at high altitudes. Previous studies have shown that African women carry head-supported loads of up to 60% of their Mb far more economically than army recruits carrying equivalent loads in backpacks. Here we show that Nepalese porters carry heavier loads even more economically than African women. Female Nepalese porters, for example, carry on average loads that are 10% of their Mb heavier than the maximum loads carried by the African women, yet do so at a 25% smaller metabolic cost.

KSC Technical Capabilities Website

Science.gov (United States)

Nufer, Brian; Bursian, Henry; Brown, Laurette L.

2010-01-01

This document is the website pages that review the technical capabilities that the Kennedy Space Center (KSC) has for partnership opportunities. The purpose of this information is to make prospective customers aware of the capabilities and provide an opportunity to form relationships with the experts at KSC. The technical capabilities fall into these areas: (1) Ground Operations and Processing Services, (2) Design and Analysis Solutions, (3) Command and Control Systems / Services, (4) Materials and Processes, (5) Research and Technology Development and (6) Laboratories, Shops and Test Facilities.

Implementing NASA's Capability-Driven Approach: Insight into NASA's Processes for Maturing Exploration Systems

Science.gov (United States)

Williams-Byrd, Julie; Arney, Dale; Rodgers, Erica; Antol, Jeff; Simon, Matthew; Hay, Jason; Larman, Kevin

2015-01-01

NASA is engaged in transforming human spaceflight. The Agency is shifting from an exploration-based program with human activities focused on low Earth orbit (LEO) and targeted robotic missions in deep space to a more sustainable and integrated pioneering approach. Through pioneering, NASA seeks to address national goals to develop the capacity for people to work, learn, operate, live, and thrive safely beyond the Earth for extended periods of time. However, pioneering space involves more than the daunting technical challenges of transportation, maintaining health, and enabling crew productivity for long durations in remote, hostile, and alien environments. This shift also requires a change in operating processes for NASA. The Agency can no longer afford to engineer systems for specific missions and destinations and instead must focus on common capabilities that enable a range of destinations and missions. NASA has codified a capability driven approach, which provides flexible guidance for the development and maturation of common capabilities necessary for human pioneers beyond LEO. This approach has been included in NASA policy and is captured in the Agency's strategic goals. It is currently being implemented across NASA's centers and programs. Throughout 2014, NASA engaged in an Agency-wide process to define and refine exploration-related capabilities and associated gaps, focusing only on those that are critical for human exploration beyond LEO. NASA identified 12 common capabilities ranging from Environmental Control and Life Support Systems to Robotics, and established Agency-wide teams or working groups comprised of subject matter experts that are responsible for the maturation of these exploration capabilities. These teams, called the System Maturation Teams (SMTs) help formulate, guide and resolve performance gaps associated with the identified exploration capabilities. The SMTs are defining performance parameters and goals for each of the 12 capabilities

Control technologies for quadruped walking robot to facilitate carrying operations in reactor buildings

International Nuclear Information System (INIS)

Suganuma, Naotaka; Uehara, Takuya; Nakamura, Norihito

2014-01-01

At the Fukushima Daiichi Nuclear Power Station of Tokyo Electric Power Co., Inc., which was seriously damaged by the Great East Japan Earthquake of March 11, 2011, it has been difficult for workers to approach the reactor buildings due to the hazardous surrounding environment. The need has therefore arsen for remote-controlled robots to facilitate inspection and restoration work on behalf of workers in such a high-level radiation environment. Toshiba has developed a quadruped walking robot that can carry various tools for decommissioning work. This robot is capable of maintaining its balance while walking on uneven surfaces, slopes, and stairs due to the adoption of control technologies to not only autonomously determine the leg trajectories and center of gravity, but also to correct the leg landing positions and posture with operator intervention according to the walking situation. It also offers high mobility and workability through a manipulation function that allows it to unload tools carried on its back storage area by using two of its legs like arms. This quadruped walking robot was applied to the investigation of suspected water leakage areas in the reactor building of Fukushima Daiichi Nuclear Power Station Unit 2 in December 2012. (author)

Organizational Economics of Capability and Heterogeneity

DEFF Research Database (Denmark)

Argyres, Nicholas S.; Felin, Teppo; Foss, Nicolai Juul

2012-01-01

For decades, the literatures on firm capabilities and organizational economics have been at odds with each other, specifically relative to explaining organizational boundaries and heterogeneity. We briefly trace the history of the relationship between the capabilities literature and organizational...... economics, and we point to the dominance of a “capabilities first” logic in this relationship. We argue that capabilities considerations are inherently intertwined with questions about organizational boundaries and internal organization, and we use this point to respond to the prevalent capabilities first...... logic. We offer an integrative research agenda that focuses first on the governance of capabilities and then on the capability of governance....

Predictive Capability of the Compressible MRG Equation for an Explosively Driven Particle with Validation

Science.gov (United States)

Garno, Joshua; Ouellet, Frederick; Koneru, Rahul; Balachandar, Sivaramakrishnan; Rollin, Bertrand

2017-11-01

An analytic model to describe the hydrodynamic forces on an explosively driven particle is not currently available. The Maxey-Riley-Gatignol (MRG) particle force equation generalized for compressible flows is well-studied in shock-tube applications, and captures the evolution of particle force extracted from controlled shock-tube experiments. In these experiments only the shock-particle interaction was examined, and the effects of the contact line were not investigated. In the present work, the predictive capability of this model is considered for the case where a particle is explosively ejected from a rigid barrel into ambient air. Particle trajectory information extracted from simulations is compared with experimental data. This configuration ensures that both the shock and contact produced by the detonation will influence the motion of the particle. The simulations are carried out using a finite volume, Euler-Lagrange code using the JWL equation of state to handle the explosive products. This work was supported by the U.S. Department of Energy, National Nuclear Security Administration, Advanced Simulation and Computing Program, as a Cooperative Agreement under the Predictive Science Academic Alliance Program,under Contract No. DE-NA0002378.

A Fast Response Capability within NOAA/NOS/CO-OPS

Science.gov (United States)

2007-01-01

A Fast Response Capability within NOAA/NOS/CO-OPS P. B. Burke NOAA/National Ocean Service/CO-OPS 1305 East-West Hwy. Silver Spring, MD 20910...USA pat.burke@noaa.gov T. Graff NOAA/National Ocean Service/CO-OPS 1305 East-West Hwy. Silver Spring, MD 20910 USA tammy.graff@noaa.gov... flotation hull, an instrumentation tower mounted atop the hull and a current meter mount with a mooring attachment. The triangular tower housed two

Wireless communication capability of a reconfigurable plasma antenna

International Nuclear Information System (INIS)

Kumar, Rajneesh; Bora, Dhiraj

2011-01-01

A 30 cm long plasma column is excited by a surface wave, which acts as a plasma antenna. Using plasma properties (pattern formation/striations in plasmas) single plasma antenna can be transformed into array, helical, and spiral plasma antenna. Experiments are carried out to study the power patterns, directivity, and half power beam width of such different plasma antennas. Moreover, field properties of plasma and copper antenna are studied. Further, wireless communication and jamming capability of plasma antenna are tested. Findings of this study suggest that directivity and communication range can be increased by converting single plasma antenna in to array/helical/spiral plasma antenna. Field frequencies of plasma antenna determine the communication and jamming of radio frequency waves. Therefore, this study invokes applications of pattern formation or striations of plasmas in plasma antenna technology.

Development of eddy current probe for fiber orientation assessment in carbon fiber composites

Science.gov (United States)

Wincheski, Russell A.; Zhao, Selina

2018-04-01

Measurement of the fiber orientation in a carbon fiber composite material is crucial in understanding the load carrying capability of the structure. As manufacturing conditions including resin flow and molding pressures can alter fiber orientation, verification of the as-designed fiber layup is necessary to ensure optimal performance of the structure. In this work, the development of an eddy current probe and data processing technique for analysis of fiber orientation in carbon fiber composites is presented. A proposed directional eddy current probe is modeled and its response to an anisotropic multi-layer conductor simulated. The modeling results are then used to finalize specifications of the eddy current probe. Experimental testing of the fabricated probe is presented for several samples including a truncated pyramid part with complex fiber orientation draped to the geometry for resin transfer molding. The inductively coupled single sided measurement enables fiber orientation characterization through the thickness of the part. The fast and cost-effective technique can be applied as a spot check or as a surface map of the fiber orientations across the structure. This paper will detail the results of the probe design, computer simulations, and experimental results.

Metrology Measurement Capabilities

Energy Technology Data Exchange (ETDEWEB)

Dr. Glen E. Gronniger

2007-10-02

This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 13.2, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2005, and ANSI/NCSL Z540-1. FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/Standards/scopes/2001080.pdf. These parameters are summarized. The Honeywell Federal Manufacturing & Technologies (FM&T) Metrology Department has developed measurement technology and calibration capability in four major fields of measurement: (1) Mechanical; (2) Environmental, Gas, Liquid; (3) Electrical (DC, AC, RF/Microwave); and (4) Optical and Radiation. Metrology Engineering provides the expertise to develop measurement capabilities for virtually any type of measurement in the fields listed above. A strong audit function has been developed to provide a means to evaluate the calibration programs of our suppliers and internal calibration organizations. Evaluation includes measurement audits and technical surveys.

Capable design or designing capabilities? An exploration of service design as an emerging organizational capability in Telenor – Martinkenaite

Directory of Open Access Journals (Sweden)

Ieva Martinkenaite

2017-01-01

Full Text Available This empirical paper examines a process, starting with the managerial decision to make service design an organizational capability, and follows it as it unfolds over time within one organization. Service design has become an established business practice of how firms create new products and services to promote differentiation in an increasingly uncertain business landscape. Implicit in the literature on service design are assumptions about strategic implications of adopting the prescribed innovation methods and tools. However, little is known about how service design evolves into an organizational capability enabling firms to transform their existing businesses and sustain competitiveness. Through a longitudinal, exploratory case study of service design practices in one of the world’s largest telecommunications companies, we explicate mechanisms through which service design evolves into an organizational capability by exploring the research question: what are the mechanisms through which service design develops into an organizational capability? Our study reveals the effect of an initial introduction of service design tools, identification of boundaryspanning actors and co-alignment of dedicated resources between internal functions, as well as through co-creation with customers. Over time, these activities lead to the adoption of service design practices, and subsequently these practices spark incremental learning throughout the organization, alter managerial decisions and influence multiple paths for the development of new capabilities. Reporting on this process, we are able to describe how service design practices were disseminated and institutionalized within the organization we observed. This study thus contributes by informing how service design can evolve into an organizational capability, as well as by bridging the emerging literature on service design and design thinking with established strategy theory. Further research will have to

Drift chamber electronics with multi-hit capability for time and current division measurements

Energy Technology Data Exchange (ETDEWEB)

Manarin, A; Pregernig, L; Rabany, M; Saban, R; Vismara, G

1983-11-15

Drift chambers have been installed for luminosity measurements in intersection 5 of the SPS accelerator working in panti p colliding mode. The required electronics is described. The system is able to process up to 16 hits per wire with a double pulse resolution of 40 ns; drift time and current division, with 1.25 ns and 1.6% resolution respectively, are recorded. Transconductance preamplifiers and discriminators are directly mounted on the chamber; 160 m of twisted-apir cable bring the signals to the digitizer unit. Coarse time is measured using RAM techniques, while fine time is obtained by means of a microstrip delay associated with a 100 K ECL priority encoder. Current division used a single 50 MHz Flash ADC which alows 26 dB dynamic range with 6 bit resolution. First operational results are reported.

The Capability to Hold Property

NARCIS (Netherlands)

Claassen, Rutger

2015-01-01

This paper discusses the question of whether a capability theory of justice (such as that of Martha Nussbaum) should accept a basic “capability to hold property.” Answering this question is vital for bridging the gap between abstract capability theories of justice and their institutional

Method and apparatus to trigger superconductors in current limiting devices

Science.gov (United States)

Yuan, Xing; Hazelton, Drew Willard; Walker, Michael Stephen

2004-10-26

A method and apparatus for magnetically triggering a superconductor in a superconducting fault current limiter to transition from a superconducting state to a resistive state. The triggering is achieved by employing current-carrying trigger coil or foil on either or both the inner diameter and outer diameter of a superconductor. The current-carrying coil or foil generates a magnetic field with sufficient strength and the superconductor is disposed within essentially uniform magnetic field region. For superconductor in a tubular-configured form, an additional magnetic field can be generated by placing current-carrying wire or foil inside the tube and along the center axial line.

IMPROVEMENTS IN THE CAPABILITY PROFILE OF 3-D PRINTING: AN UPDATE

Directory of Open Access Journals (Sweden)

Dimitrov, Dimitar Marinov

2014-08-01

Full Text Available Knowledge about the capabilities of a production system is an important issue. The three- dimensional (3-D printing (drop-on-bed process has become a well-established Additive Manufacturing (AM technology. Initially intended for use mainly as a concept modeller, its scope of application has expanded to include, among others, fit and functional models, pattern-making for casting and moulding processes, rapid tooling, and medical and architectural models. This growth in applications has stimulated a reciprocal improvement in available materials and the technological capabilities of 3-D printing, such as accuracy, strength and elongation, surface finish, build time, and cost. These factors are of significance to users who want to control their processes better and to designers who want to define their expectations and determine their requirements. Thus this paper aims to provide a technical update, highlighting the influence level of different factors on a system’s capabilities. This paper uses the example of the ZPrinter 310 system from the Z Corporation, applies appropriate statistical techniques, and takes into consideration the latest material and machine developments, in order to report on the current improvements of the capability profile of this important process.

Baseline Assessment and Prioritization Framework for IVHM Integrity Assurance Enabling Capabilities

Science.gov (United States)

Cooper, Eric G.; DiVito, Benedetto L.; Jacklin, Stephen A.; Miner, Paul S.

2009-01-01

Fundamental to vehicle health management is the deployment of systems incorporating advanced technologies for predicting and detecting anomalous conditions in highly complex and integrated environments. Integrated structural integrity health monitoring, statistical algorithms for detection, estimation, prediction, and fusion, and diagnosis supporting adaptive control are examples of advanced technologies that present considerable verification and validation challenges. These systems necessitate interactions between physical and software-based systems that are highly networked with sensing and actuation subsystems, and incorporate technologies that are, in many respects, different from those employed in civil aviation today. A formidable barrier to deploying these advanced technologies in civil aviation is the lack of enabling verification and validation tools, methods, and technologies. The development of new verification and validation capabilities will not only enable the fielding of advanced vehicle health management systems, but will also provide new assurance capabilities for verification and validation of current generation aviation software which has been implicated in anomalous in-flight behavior. This paper describes the research focused on enabling capabilities for verification and validation underway within NASA s Integrated Vehicle Health Management project, discusses the state of the art of these capabilities, and includes a framework for prioritizing activities.

NGNP Data Management and Analysis System Analysis and Web Delivery Capabilities

Energy Technology Data Exchange (ETDEWEB)

Cynthia D. Gentillon

2011-09-01

Projects for the Very High Temperature Reactor (VHTR) Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the very high temperature reactor. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high-temperature and high-fluence environments. The NGNP Data Management and Analysis System (NDMAS) at the Idaho National Laboratory has been established to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the third NDMAS objective. It describes capabilities for displaying the data in meaningful ways and for data analysis to identify useful relationships among the measured quantities. The capabilities are described from the perspective of NDMAS users, starting with those who just view experimental data and analytical results on the INL NDMAS web portal. Web display and delivery capabilities are described in detail. Also the current web pages that show Advanced Gas Reactor, Advanced Graphite Capsule, and High Temperature Materials test results are itemized. Capabilities available to NDMAS developers are more extensive, and are described using a second series of examples. Much of the data analysis efforts focus on understanding how thermocouple measurements relate to simulated temperatures and other experimental parameters. Statistical control charts and correlation monitoring provide an ongoing assessment of instrument accuracy. Data analysis capabilities are virtually unlimited for those who use the NDMAS web data download capabilities and the analysis software of their choice. Overall, the NDMAS provides convenient data analysis and web delivery capabilities for studying a very large and rapidly increasing database of well-documented, pedigreed data.

Power spectra of currents off Bombay

Digital Repository Service at National Institute of Oceanography (India)

Varkey, M.J.

Current measurements were carried out using a recording current meter across the continental shelf off Bombay, Maharashtra, India at 4 stations from an anchored ship. Power spectra were computed for selected lengths of records. Spectral energy...

Developing Collaborative Product Development Capabilities

DEFF Research Database (Denmark)

Mahnke, Volker; Tran, Yen

2012-01-01

innovation strategies’. Our analyses suggest that developing such collaboration capabilities benefits from the search for complementary practices, the combination of learning styles, and the development of weak and strong ties. Results also underscore the crucial importance of co-evolution of multi......Collaborative product development capabilities support a company’s product innovation activities. In the context of the fast fashion sector, this paper examines the development of the product development capabilities (PDC) that align product development capabilities in a dual innovation context......, one, slow paced, where the firm is well established and the other, fast paced, which represents a new competitive arena in which the company competes. To understand the process associated with collaborative capability development, we studied three Scandinavian fashion companies pursuing ‘dual...

A Dangerous Idea? Freedom, Children and the Capability Approach to Education

Science.gov (United States)

Bessant, Judith

2014-01-01

This article begins by observing how education is currently appreciated primarily for its utility value, a view informed by utilitarianism and neoclassical economic theory. A critique of that framing is offered and an alternative way of valuing education informed by a Capabilities Approach is presented. In doing so, I also observe that while key…

Implementation of the Land, Atmosphere Near Real-Time Capability for EOS (LANCE)

Science.gov (United States)

Michael, Karen; Murphy, Kevin; Lowe, Dawn; Masuoka, Edward; Vollmer, Bruce; Tilmes, Curt; Teague, Michael; Ye, Gang; Maiden, Martha; Goodman, H. Michael;

Rationalization and future planning for AECL's research reactor capability

International Nuclear Information System (INIS)

Slater, J.B.

1990-01-01

AECL's research reactor capability has played a crucial role in the development of Canada's nuclear program. All essential concepts for the CANDU reactors were developed and tested in the NRX and NRU reactors, and in parallel, important contributions to basic physics were made. The technical feasibility of advanced fuel cycles and of the organic-cooled option for CANDU reactors were also demonstrated in the two reactors and the WR-1 reactor. In addition, an important and growing radio-isotope production industry was established and marketed on a world-wide basis. In 1984, however, it was recognized that a review and rationalization of the research reactor capability was required. The commercial success of the CANDU reactor system had reduced the scope and size of the required development program. Limited research and development funding and competition from other research facilities and programs, required that the scope be reduced to a support basis essential to maintain strategic capability. Currently, AECL, is part-way through this rationalization program and completion should be attained during 1992/93 when the MAPLE reactor is operational and decisions on NRX decommissioning will be made. A companion paper describes some of the unique operational and maintenance problems which have resulted from this program and the solutions which have been developed. Future planning must recognize the age of the NRU reactor (currently 32 years) and the need to plan for eventual replacement. Strategy is being developed and supporting studies include a full technical assessment of the NRU reactor and the required age-related upgrading program, evaluation of the performance characteristics and costs of potential future replacement reactors, particularly the advanced MAPLE concept, and opportunities for international co-operation in developing mutually supportive research programs

Dynamic Capabilities and Performance

DEFF Research Database (Denmark)

Wilden, Ralf; Gudergan, Siegfried P.; Nielsen, Bo Bernhard

2013-01-01

are contingent on the competitive intensity faced by firms. Our findings demonstrate the performance effects of internal alignment between organizational structure and dynamic capabilities, as well as the external fit of dynamic capabilities with competitive intensity. We outline the advantages of PLS...

Link Between Capacity for Current Production and Syntrophic Growth in Geobacter species

Directory of Open Access Journals (Sweden)

Amelia-Elena eRotaru

2015-07-01

Full Text Available Electrodes are unnatural electron acceptors, and it is yet unknown how some Geobacter species evolved to use electrodes as terminal electron acceptors. Analysis of different Geobacter species revealed that they varied in their capacity for current production. G. metallireducens and G. hydrogenophilus generated high current densities (ca. 0.05 mA/cm2, comparable to G. sulfurreducens. G. bremensis, G. chapellei, G. humireducens, and G. uranireducens, produced much lower currents (ca. 0.05 mA/cm2 and G. bemidjiensis was previously found to not produce current. There was no correspondence between the effectiveness of current generation and Fe(III oxide reduction rates. Some high-current-density strains (G. metallireducens and G. hydrogenophilus reduced Fe(III-oxides as fast as some low-current-density strains (G. bremensis, G. humireducens, and G. uranireducens whereas other low-current-density strains (G. bemidjiensis and G. chapellei reduced Fe(III oxide as slowly as G. sulfurreducens, a high-current-density strain. However, there was a correspondence between the ability to produce higher currents and the ability to grow syntrophically. G. hydrogenophilius was found to grow in co-culture with Methanosarcina barkeri, which is capable of direct interspecies electron transfer (DIET, but not with Methanospirillium hungatei capable only of H2 or formate transfer. Conductive granular activated carbon (GAC stimulated metabolism of the G. hydrogenophilus - M. barkeri co-culture, consistent with electron exchange via DIET. These findings, coupled with the previous finding that G. metallireducens and G. sulfurreducens are also capable of DIET, suggest that evolution to optimize DIET has fortuitiously conferred the capability for high-density current production to some Geobacter species.

Author's capabilities in author indexing

International Nuclear Information System (INIS)

Ooi, Shoichi

1988-01-01

The purpose of this paper is to provide a author capability of current author indexing practices in journal literature indexing practices in 'Journal of Nuclear Science and Technology of Japan'. This Journal employed keywords freely assigned by author and not taken from INIS Thesaurus or other vocabulary list. Author examined 413 literatures, comparing keywords assigned by the literatures' authors with descriptor's (ATOMINDEX) assigned by an experienced professional indexer. The results of the comparisons showed that the average set of terms assigned by author included about 70% of all the terms assigned to the same literature by the professional indexer. Authors eventually would contribute, for the most effective point to create reference to information is at the time of its generation. Consequently, it may be possible to transfer them easily to descriptors in every secondary information system. (author)

Improvements in the critical current densities of Nb3Sn by solid solution additions of Sn in Nb

International Nuclear Information System (INIS)

Luhman, T.; Suenaga, M.

1975-01-01

The effectiveness of solid solution additions of Sn to Nb in improving the superconducting properties of diffusion processed Nb 3 Sn conductors was examined. It was found that an increase in the superconducting critical current density, Jc, as function of layer thickness (d) may be obtained for thick Nb 3 Sn layers by solid solution additions of Sn in Nb. A large increase in J/sub c/ (d) is also achieved by increasing the Sn content in the bronze matrix material. In addition to uses of this material in magnet fabrications a potential application of these improved J/sub c/(d) values may lie in the use of Nb 3 Sn in power transmission lines. Here, a high superconducting critical current density is necessary throughout the material to carry the increased current during fault conditions. The magnetic field dependence of J/sub c/ is a function of alloy content but the alloying changes studied here do not increase the high field critical current capability of Nb 3 Sn. (auth)

Marketing Capability in Strategy Research

DEFF Research Database (Denmark)

Ritter, Thomas; Distel, Andreas Philipp

Following the call for a demand-side perspective of strategic management (e.g., Priem et al., 2012), a firm’s marketing capability, i.e. its ability to interact with down-stream stakeholders, becomes a pivotal element in explaining a firm’s competitiveness. While marketing capability is recognized...... in the strategic management literature as an important driver of firm performance, our review of 86 articles reveals a lack of a generally accepted definition of marketing capability, a lack of a common conceptualization as well as differences in the measurement of marketing capability. In order to build a common...... ground for advancing marketing capability research and thus supporting the demand-side perspective in strategic management, we develop an integrative framework to explain the differences and propose a research agenda for developing the field....

Study of information-orientation carry-out plan in energy sector

Energy Technology Data Exchange (ETDEWEB)

Kang, T W [Korea Energy Economics Institute, Euiwang (Korea, Republic of)

1998-04-01

Carrying out an information-orientation plan in the energy sector is indispensable if Korea is to survive in this unlimited competition age and global management system. It is also for maximizing the management efficiency of national energy resources as well as increasing the development of related industries and national welfare. The management of the energy resources sector of Korea, which is becoming diversified escaping from the past simple quantitative management of supplier-orientation, requires versatile and ample high-class information management system and high-level decision support system. In order to satisfy these requests, this study investigated and analyzed overall policies of the energy sector for carrying out information-orientation, neighborhood environment, organizational chart, information transfer method, the current condition of information-orientation, problems and improvements, demand of information-orientation of the future, and also reviewed the information-orientation status of advanced countries. Based on these, an information-orientation carryout plan in the energy sector is broken into three stages of `establishment of information transfer system`, `development of database`, and `establishment of decision support system` and presented per detailed work. It advised manpower, equipment and budget implementation plan, and a development schedule plan required for carrying out information-orientation as well as overall environmental build-up, and policy recommendation for the successful implementation of information-orientation. 24 refs., 27 figs., 15 tabs.

Strategies for developing subchannel capability in an advanced system thermalhydraulic code: a literature review

International Nuclear Information System (INIS)

Cheng, J.; Rao, Y.F.

2015-01-01

In the framework of developing next generation safety analysis tools, Canadian Nuclear Laboratories (CNL) has planned to incorporate subchannel analysis capability into its advanced system thermalhydraulic code CATHENA 4. This paper provides a literature review and an assessment of current subchannel codes. It also evaluates three code-development methods: (i) static coupling of CATHENA 4 with the subchannel code ASSERT-PV, (ii) dynamic coupling of the two codes, and (iii) fully implicit implementation for a new, standalone CATHENA 4 version with subchannel capability. Results of the review and assessment suggest that the current ASSERT-PV modules can be used as the base for the fully implicit implementation of subchannel capability in CATHENA 4, and that this option may be the most cost-effective in the long run, resulting in savings in user application and maintenance costs. In addition, improved versatility of the tool could be accomplished by the addition of new features that could be added as part of its development. The new features would improve the capabilities of the existing subchannel code in handling low, reverse, and stagnant flows often encountered in system thermalhydraulic analysis. Therefore, the method of fully implicit implementation is preliminarily recommended for further exploration. A feasibility study will be performed in an attempt to extend the present work into a preliminary development plan. (author)

Ion extraction capabilities of closely spaced grids

Science.gov (United States)

Rovang, D. C.; Wilbur, P. J.

1982-01-01

The ion extraction capabilities of accelerator systems with small screen hole diameters (less than 2.0 mm) are investigated at net-accelerating voltages of 100, 300, and 500 V. Results show that the impingement-limited perveance is not dramatically affected by reductions in screen hole diameter to 1.0 mm, but impingement-limited performance was found to be dependent on the grid separation distance, the discharge-to-total accelerating voltage ratio, and the net-to-total accelerating voltage ratio. Results obtained using small hole diameters and closely spaced grids indicate a new mode of grid operation where high current density operation can be achieved with a specified net acceleration voltage by operating the grids at a high rather than low net-to-total acceleration voltage. Beam current densities as high as 25 mA/sq cm were obtained using grids with 1.0 mm diameter holes operating at a net accelerating voltage of 500 V.

Improving Effectiveness of Capabilities in EU Conflict Prevention

DEFF Research Database (Denmark)

Rodt, Annemarie Peen

– severely challenging the Union’s current capabilities as an international security provider. The urgency of improving conflict preventive and crisis management measures is particularly pertinent in Africa, where the numbers affected by conflicts across the continent are staggering. This contribution sets...... out to answer whether – and if so how – EU responses to African conflicts have made a meaningful contribution to preventing (further) conflict. The Union’s efforts in Libya, South Sudan, Democratic Republic of Congo and Central African Republic are critically examined in a comparative case study...

The Impact of IT Capability on Employee Capability, Customer Value, Customer Satisfaction, and Business Performance

Science.gov (United States)

Chae, Ho-Chang

2009-01-01

This study empirically examines the impact of IT capability on firms' performance and evaluates whether firms' IT capabilities play a role in improving employee capability, customer value, customer satisfaction, and ultimately business performance. The results were based on comparing the business performance of the IT leader companies with that of…

Advances in U.S. Land Imaging Capabilities

Science.gov (United States)

Stryker, T. S.

2017-12-01

Advancements in Earth observations, cloud computing, and data science are improving everyday life. Information from land-imaging satellites, such as the U.S. Landsat system, helps us to better understand the changing landscapes where we live, work, and play. This understanding builds capacity for improved decision-making about our lands, waters, and resources, driving economic growth, protecting lives and property, and safeguarding the environment. The USGS is fostering the use of land remote sensing technology to meet local, national, and global challenges. A key dimension to meeting these challenges is the full, free, and open provision of land remote sensing observations for both public and private sector applications. To achieve maximum impact, these data must also be easily discoverable, accessible, and usable. The presenter will describe the USGS Land Remote Sensing Program's current capabilities and future plans to collect and deliver land remote sensing information for societal benefit. He will discuss these capabilities in the context of national plans and policies, domestic partnerships, and international collaboration. The presenter will conclude with examples of how Landsat data is being used on a daily basis to improve lives and livelihoods.

Amartya Sen's Capability Approach and Education

Science.gov (United States)

Walker, Melanie

2005-01-01

The human capabilities approach developed by the economist Amartya Sen links development, quality of life and freedom. This article explores the key ideas in the capability approach of: capability, functioning, agency, human diversity and public participation in generating valued capabilities. It then considers how these ideas relate specifically…

Capability maturity models in engineering companies: case study analysis

Directory of Open Access Journals (Sweden)

Titov Sergei

2016-01-01

Full Text Available In the conditions of the current economic downturn engineering companies in Russia and worldwide are searching for new approaches and frameworks to improve their strategic position, increase the efficiency of the internal business processes and enhance the quality of the final products. Capability maturity models are well-known tools used by many foreign engineering companies to assess the productivity of the processes, to elaborate the program of business process improvement and to prioritize the efforts to optimize the whole company performance. The impact of capability maturity model implementation on cost and time are documented and analyzed in the existing research. However, the potential of maturity models as tools of quality management is less known. The article attempts to analyze the impact of CMM implementation on the quality issues. The research is based on a case study methodology and investigates the real life situation in a Russian engineering company.

The influence of reactive current on wind farm LVRT behavior

Energy Technology Data Exchange (ETDEWEB)

Li, Qing; Zhang, Mei; He, Jing; Qin, Shi-yao [China Electric Power Research Institute, Beijing (China)

2012-07-01

The Low voltage ride through (LVRT) capability of the whole wind farm is required in Chinese grid code published in 2011. In order to analyze the influence of reactive current on wind farm during grid fault, a 100 MW wind farm was simulated with the wind turbines which have been tested. Based on the validated wind turbine model, the wind farm was detailed modelled in DigSILENT/PowerFactory. The model of wind turbines, transformers, feeders, main transformers, static var compensator, and transmission lines was considered in the simulation. Under the weak and strong grid conditions, the wind farm was simulated with different wind turbine reactive current behavior during grid fault, respectively. The voltage distribution, active and reactive power transient behavior at the point of interconnection was analyzed. The results show that wind farm LVRT behavior is related to reactive current and LVRT capability of wind turbine, wind farm electrical structure and grid conditions. And it is very important for wind turbine to have a flexible dynamic reactive current control capability. (orig.)

Excessive current in wide superconducting films

International Nuclear Information System (INIS)

Volotskaya, V.G.; Sivakov, A.G.; Turutanov, O.G.

1986-01-01

The resistive state of a wide long film due to superconductivity destruction by current is studied. The voltage-independent excess current I 0 is observed on I-V curves at high transport currents. The two-dimensional image of the current-carrying sample obtained by laser scanning technique in this current range indicates that the whole film is in the resistive state. The current I 0 is measured as a function of magnetic field and SHF power

Data engineering systems: Computerized modeling and data bank capabilities for engineering analysis

Science.gov (United States)

Kopp, H.; Trettau, R.; Zolotar, B.

1984-01-01

The Data Engineering System (DES) is a computer-based system that organizes technical data and provides automated mechanisms for storage, retrieval, and engineering analysis. The DES combines the benefits of a structured data base system with automated links to large-scale analysis codes. While the DES provides the user with many of the capabilities of a computer-aided design (CAD) system, the systems are actually quite different in several respects. A typical CAD system emphasizes interactive graphics capabilities and organizes data in a manner that optimizes these graphics. On the other hand, the DES is a computer-aided engineering system intended for the engineer who must operationally understand an existing or planned design or who desires to carry out additional technical analysis based on a particular design. The DES emphasizes data retrieval in a form that not only provides the engineer access to search and display the data but also links the data automatically with the computer analysis codes.

Mars Surface System Common Capabilities and Challenges for Human Missions

Science.gov (United States)

Hoffman, Stephen J.; Toups, Larry

2016-01-01

NASA has begun a process to identify and evaluate candidate locations where humans could land, live and work on the martian surface. These locations are referred to as Exploration Zones (EZs). Given current mission concepts, an EZ is a collection of Regions of Interest (ROIs) that are located within approximately 100 kilometers of a centralized landing site. ROIs are areas that are relevant for scientific investigation and/or development/maturation of capabilities and resources necessary for a sustainable human presence. The EZ also contains a landing site and a habitation site that will be used by multiple human crews during missions to explore and utilize the ROIs within the EZ. In parallel with this process, NASA continues to make progress on the Evolvable Mars Campaign examining alternatives that can pioneer an extended human presence on Mars that is Earth independent. This involves ongoing assessments of surface systems and operations to enable a permanent, sustainable human presence. Because of the difficulty in getting equipment and supplies to the surface of Mars, part of these assessments involve identifying those systems and processes that can perform in multiple, sometimes completely unrelated, situations. These assessments have been performed in a very generic surface mission carried out at a very generic surface location. As specific candidate EZs are identified it becomes important to evaluate the current suite of surface systems and operations as they are likely to perform for the specific locations and for the types of operations - both scientific and development - that are proposed for these EZs. It is also important to evaluate the proposed EZs for their suitability to be explored or developed given the range of capabilities and constraints for the types of surface systems and operations being considered within the EMC. This means looking at setting up and operating a field station at a central location within the EZ as well as traversing to and

Verification of the short-circuit current making capability of high-voltage switching devices

NARCIS (Netherlands)

Smeets, R.P.P.; Linden, van der W.A.

2001-01-01

Switching-in of short-circuit current leads to pre-arcing in the switching device. Pre-arcing affects the ability of switchgear to close and latch. In three-phase systems, making is associated with transient voltage phenomena that may have a significant impact on the duration of the pre-arcing

Nonconservative current-induced forces: A physical interpretation

Directory of Open Access Journals (Sweden)

Tchavdar N. Todorov

2011-10-01

Full Text Available We give a physical interpretation of the recently demonstrated nonconservative nature of interatomic forces in current-carrying nanostructures. We start from the analytical expression for the curl of these forces, and evaluate it for a point defect in a current-carrying system. We obtain a general definition of the capacity of electrical current flow to exert a nonconservative force, and thus do net work around closed paths, by a formal noninvasive test procedure. Second, we show that the gain in atomic kinetic energy over time, generated by nonconservative current-induced forces, is equivalent to the uncompensated stimulated emission of directional phonons. This connection with electron–phonon interactions quantifies explicitly the intuitive notion that nonconservative forces work by angular momentum transfer.

Can `loss and damage' carry the load?

Science.gov (United States)

Verchick, Robert R. M.

2018-05-01

Even assuming a heroic rush towards carbon reduction and adaptation, some regions of the world will be hammered hard by climate impacts. Thus, a global consensus now sees the need for a supplemental plan to deal with the kind of harms that cannot be avoided-what Parties call `loss and damage'. For a loss-and-damage plan to work, it must be capable of carrying the load, the load being whatever minimal standards that morality and political consensus require. But if residual risk climbs too high, it will fall short of even the most basic expectations. The Paris Agreement calls for holding the rise in global average temperature to `well below 2°C above pre-industrial levels', while working to limit the increase to 1.5°C. How much difference is in that half-degree? From the point of view of residual risk, quite a lot. According to a 2016 study published by the European Geosciences Union, a jump from 1.5°C to 2°C could produce outsize impacts, particularly in tropical latitudes. That difference could mark the line between a plan that is politically and morally defensible and one that is not. At the very least, the difference is enough to inform the design and expectations of any future plan. This article is part of the theme issue `The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'.

Telematics Options and Capabilities

Energy Technology Data Exchange (ETDEWEB)

Hodge, Cabell [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-05

This presentation describes the data tracking and analytical capabilities of telematics devices. Federal fleet managers can use the systems to keep their drivers safe, maintain a fuel efficient fleet, ease their reporting burden, and save money. The presentation includes an example of how much these capabilities can save fleets.

Capability Handbook- offline metrology

DEFF Research Database (Denmark)

Islam, Aminul; Marhöfer, David Maximilian; Tosello, Guido

This offline metrological capability handbook has been made in relation to HiMicro Task 3.3. The purpose of this document is to assess the metrological capability of the HiMicro partners and to gather the information of all available metrological instruments in the one single document. It provides...

Current-limiting mechanisms in YBa2Cu3O7-δ thin layers and quasi-multilayers

International Nuclear Information System (INIS)

Haenisch, J.

2004-01-01

In this work, electrical transport properties and the maximum current carrying capability of YBa 2 Cu 3 O 7 -[δ] thin films and so called quasi-multilayers are investigated. These samples are prepared with pulsed laser deposition on single-crystalline substrates (SrTiO 3 ) as well as on biaxially textured Ni tapes. The critical current density of coated conductors is limited by small-angle grain boundaries in low magnetic fields, but by the intra-grain pinning properties in higher magnetic fields. Accordingly, these investigations are divided into two parts: In the first part, the limitation of the critical current density by grain-boundaries and grain boundary networks is investigated with the main focus on the influence of geometrical factors such as the conductor width or the grain aspect ratio. In the second part, a possible enhancement of the critical current density due to different doping types (atomar doping using Zn and precipitate doping using BaMO 3 where M is a transition metal) will be discussed. Here, not only the irreversibility field but also the pinning behaviour in very low magnetic fields is of interest to better understand the pinning mechanism of thin films. (Orig.)

The Capability Approach

OpenAIRE

Robeyns, Ingrid

2011-01-01

textabstract In its most general description, the capability approach is a flexible and multi-purpose normative framework, rather than a precise theory of well-being, freedom or justice. At its core are two normative claims: first, the claim that the freedom to achieve well-being is of primary moral importance, and second, that freedom to achieve well-being is to be understood in terms of people’s capabilities, that is, their real opportunities to do and be what they have reason to value. Thi...

Sandia QIS Capabilities.

Energy Technology Data Exchange (ETDEWEB)

Muller, Richard P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-07-01

Sandia National Laboratories has developed a broad set of capabilities in quantum information science (QIS), including elements of quantum computing, quantum communications, and quantum sensing. The Sandia QIS program is built atop unique DOE investments at the laboratories, including the MESA microelectronics fabrication facility, the Center for Integrated Nanotechnologies (CINT) facilities (joint with LANL), the Ion Beam Laboratory, and ASC High Performance Computing (HPC) facilities. Sandia has invested $75 M of LDRD funding over 12 years to develop unique, differentiating capabilities that leverage these DOE infrastructure investments.

State-level emergency preparedness and response capabilities.

Science.gov (United States)

Watkins, Sharon M; Perrotta, Dennis M; Stanbury, Martha; Heumann, Michael; Anderson, Henry; Simms, Erin; Huang, Monica

2011-03-01

Prior assessments of public health readiness had identified gaps in radiation preparedness. In recent years, preparedness planning has involved an "all-hazards" approach. Current assessment of the national status related to radiation public health emergency preparedness capabilities at the state and local health department levels was needed. A survey of state health departments related to radiation readiness was undertaken in 2010 by the Council of State and Territorial Epidemiologists (CSTE). States with nuclear power plants were instructed to consider their responses exclusive of capabilities and resources related to the plants given that the emergency response plans for nuclear power plants are specific and unique. Thirty-eight (76%) state health departments responded to the survey, including 26 of the 31 states with nuclear power plants. Specific strengths noted at the state level included that the majority of states had a written radiation response plan and most plans include a detailed section for communications issues during a radiation emergency. In addition, more than half of the states indicated that their relationship with federal partners is sufficient to provide resources for radiation emergencies, indicating the importance states placed on federal resources and expertise. Specific weaknesses are discussed and include that most states had completed little to no planning for public health surveillance to assess potential human health impacts of a radiation event; less than half had written plans to address exposure assessment, environmental sampling, human specimen collection and analysis, and human health assessment. Few reported having sufficient resources to do public health surveillance, radiation exposure assessment, laboratory functions and other capabilities. Levels of planning, resources and partnerships varied among states, those with nuclear power plants were better prepared. Gaps were evident in all states; however and additional training and

A Study on the Impact of Marketing Capability, Operations Capability, Environmental Capability and Diversification Strategy on the Performance of Hotel Industry in the UK

OpenAIRE

ZHANG, YUBO

2009-01-01

Hotel industry has been an increasingly significant service industry across the whole world. The performance measurement method is crucial for hotels’ operations. This study examines the impacts of marketing capability, operations capability, environmental capability and diversification strategy on the business performance of hotel industry in the UK. Based on the financial archival data in the database and information obtained in the firm websites from 2004 to 2007, the investigation is carr...

Three dimensional equilibrium solutions for a current-carrying reversed-field pinch plasma with a close-fitting conducting shell

Energy Technology Data Exchange (ETDEWEB)

Koliner, J. J.; Boguski, J., E-mail: boguski@wisc.edu; Anderson, J. K.; Chapman, B. E.; Den Hartog, D. J.; Duff, J. R.; Goetz, J. A.; McGarry, M.; Morton, L. A.; Parke, E. [Department of Physics, University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States); Cianciosa, M. R. [Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831 (United States); Hanson, J. D. [Department of Physics, Auburn University, Auburn, Alabama 36849 (United States); Brower, D. L.; Ding, W. X. [Department of Physics and Astronomy, University of California, Los Angeles, California 90095 (United States)

2016-03-15

In order to characterize the Madison Symmetric Torus (MST) reversed-field pinch (RFP) plasmas that bifurcate to a helical equilibrium, the V3FIT equilibrium reconstruction code was modified to include a conducting boundary. RFP plasmas become helical at a high plasma current, which induces large eddy currents in MST's thick aluminum shell. The V3FIT conducting boundary accounts for the contribution from these eddy currents to external magnetic diagnostic coil signals. This implementation of V3FIT was benchmarked against MSTFit, a 2D Grad-Shafranov solver, for axisymmetric plasmas. The two codes both fit B{sub θ} measurement loops around the plasma minor diameter with qualitative agreement between each other and the measured field. Fits in the 3D case converge well, with q-profile and plasma shape agreement between two distinct toroidal locking phases. Greater than 60% of the measured n = 5 component of B{sub θ} at r = a is due to eddy currents in the shell, as calculated by the conducting boundary model.

Overview of the ITER EC H and CD system and its capabilities

Energy Technology Data Exchange (ETDEWEB)

Omori, T., E-mail: toshimichi.omori@iter.org [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Henderson, M.A. [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Albajar, F. [Fusion for Energy, C/Josep Pla 2, Torres Diagonal Litoral-B3, E-08019 Barcelona (Spain); Alberti, S. [CRPP-Association EURATOM-Confederation Suisse, EPFL Ecublens, CH-1015 Lausanne (Switzerland); Baruah, U. [Institute for Plasma Research, Near Indira Bridge, Bhat, Gandhinagar 382428 (India); Bigelow, T.S. [US ITER Project Office, ORNL, 055 Commerce Park, PO Box 2008, Oak Ridge, TN 37831 (United States); Beckett, B. [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Bertizzolo, R. [CRPP-Association EURATOM-Confederation Suisse, EPFL Ecublens, CH-1015 Lausanne (Switzerland); Bonicelli, T. [Fusion for Energy, C/Josep Pla 2, Torres Diagonal Litoral-B3, E-08019 Barcelona (Spain); Bruschi, A. [Istituto di Fisica del Plasma, Association EURATOM-ENEA-CNR, Milano (Italy); Caughman, J.B. [US ITER Project Office, ORNL, 055 Commerce Park, PO Box 2008, Oak Ridge, TN 37831 (United States); Chavan, R. [CRPP-Association EURATOM-Confederation Suisse, EPFL Ecublens, CH-1015 Lausanne (Switzerland); Cirant, S. [Istituto di Fisica del Plasma, Association EURATOM-ENEA-CNR, Milano (Italy); Collazos, A. [CRPP-Association EURATOM-Confederation Suisse, EPFL Ecublens, CH-1015 Lausanne (Switzerland); Cox, D.; Darbos, C. [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France); Baar, M.R. de [Association EURATOM-FOM, 3430 BE Nieuwegein (Netherlands); Denisov, G. [Institute of Applied Physics, 46 Ulyanov Street, Nizhny Novgorod 603950 (Russian Federation); Farina, D. [Istituto di Fisica del Plasma, Association EURATOM-ENEA-CNR, Milano (Italy); Gandini, F. [ITER Organization, CS 90 046, 13067 St Paul Lez Durance Cedex (France)

2011-10-15

The Electron Cyclotron (EC) system for the ITER tokamak is designed to inject {>=}20 MW RF power into the plasma for Heating and Current Drive (H and CD) applications. The EC system consists of up to 26 gyrotrons (between 1 and 2 MW each), the associated power supplies, 24 transmission lines and 5 launchers. The EC system has a diverse range of applications including central heating and current drive, current profile tailoring and control of plasma magneto-hydrodynamic (MHD) instabilities such as the sawtooth and neoclassical tearing modes (NTMs). This diverse range of applications requires the launchers to be capable of depositing the EC power across nearly the entire plasma cross section. This is achieved by two types of antennas: an equatorial port launcher (capable of injecting up to 20 MW from the plasma axis to mid-radius) and four upper port launchers providing access from inside of mid radius to near the plasma edge. The equatorial launcher design is optimized for central heating, current drive and profile tailoring, while the upper launcher should provide a very focused and peaked current density profile to control the plasma instabilities. The overall EC system has been modified during the past 3 years taking into account the issues identified in the ITER design review from 2007 and 2008 as well as integrating new technologies. This paper will review the principal objectives of the EC system, modifications made during the past 2 years and how the design is compliant with the principal objectives.

Overview of the ITER EC H and CD system and its capabilities

International Nuclear Information System (INIS)

Omori, T.; Henderson, M.A.; Albajar, F.; Alberti, S.; Baruah, U.; Bigelow, T.S.; Beckett, B.; Bertizzolo, R.; Bonicelli, T.; Bruschi, A.; Caughman, J.B.; Chavan, R.; Cirant, S.; Collazos, A.; Cox, D.; Darbos, C.; Baar, M.R. de; Denisov, G.; Farina, D.; Gandini, F.

2011-01-01

The Electron Cyclotron (EC) system for the ITER tokamak is designed to inject ≥20 MW RF power into the plasma for Heating and Current Drive (H and CD) applications. The EC system consists of up to 26 gyrotrons (between 1 and 2 MW each), the associated power supplies, 24 transmission lines and 5 launchers. The EC system has a diverse range of applications including central heating and current drive, current profile tailoring and control of plasma magneto-hydrodynamic (MHD) instabilities such as the sawtooth and neoclassical tearing modes (NTMs). This diverse range of applications requires the launchers to be capable of depositing the EC power across nearly the entire plasma cross section. This is achieved by two types of antennas: an equatorial port launcher (capable of injecting up to 20 MW from the plasma axis to mid-radius) and four upper port launchers providing access from inside of mid radius to near the plasma edge. The equatorial launcher design is optimized for central heating, current drive and profile tailoring, while the upper launcher should provide a very focused and peaked current density profile to control the plasma instabilities. The overall EC system has been modified during the past 3 years taking into account the issues identified in the ITER design review from 2007 and 2008 as well as integrating new technologies. This paper will review the principal objectives of the EC system, modifications made during the past 2 years and how the design is compliant with the principal objectives.

UK resource base assessment of organisations and capabilities in the biomass sector

International Nuclear Information System (INIS)

1996-01-01

British Biogen is the trade association for the UK's emerging biomass industry. It has been recognised that the biomass industry has considerable export potential due to its immense scale potential overseas, and there is an accompanying need for an export development strategy for the industry. The report contains a detailed analysis of a selection of UK companies and organisations, with regard to their export capabilities, thus providing an essential pre-requisite to developing the export strategy. The fundamental aim of the study is to assess the nature, scale and current capabilities of the UK biomass industry resource base and, in turn, to determine its potential to service export markets. (author)

How does procurement capability maturity affect e-Procurement adoption and leverage purchasing in supply chain

Directory of Open Access Journals (Sweden)

Pongpanga Pongsuwan

2016-11-01

Full Text Available This study refers to the research model of Batenburg (2008 which defined procurement functions to six maturity dimensions; strategy, processes, control, organization, information, e-Technology as the starting point and indicates twenty two items to support capability maturity measurement which is called “Procurement Competitive Capability Maturity”(PCCM. This model is used for a company to assess current practices of procurement function and perceives the level of its capabilities. The data collection is from a survey of fifty-two selected procurement organizations in Southeast Asia (SEA countries; from Thailand, Vietnam, Philippines, Indonesia, Malaysia and Singapore. The objective of this study is to demonstrate the significant value of industry type, size of spending and centralized/decentralized procurement that affect procurement capability maturity. The results show that the industry has no relation to the capability maturity; the size of procurement spend has a positive relation to the capability maturity; and the centralized procurement has higher capability maturity than the decentralized. Moreover, this study extends the knowledge of e-Procurement and digital context to leverage procurement processes and visible procurement integration in an organization and across the supply chain.

Parallelization of Reversible Ripple-carry Adders

DEFF Research Database (Denmark)

Thomsen, Michael Kirkedal; Axelsen, Holger Bock

2009-01-01

The design of fast arithmetic logic circuits is an important research topic for reversible and quantum computing. A special challenge in this setting is the computation of standard arithmetical functions without the generation of \\emph{garbage}. Here, we present a novel parallelization scheme...... wherein $m$ parallel $k$-bit reversible ripple-carry adders are combined to form a reversible $mk$-bit \\emph{ripple-block carry adder} with logic depth $\\mathcal{O}(m+k)$ for a \\emph{minimal} logic depth $\\mathcal{O}(\\sqrt{mk})$, thus improving on the $mk$-bit ripple-carry adder logic depth $\\mathcal...

STS-99 workers carry new Master Events Controller to Endeavour

Science.gov (United States)

2000-01-01

Workers carry the replacement Enhanced Main Events Controller (E- MEC) to Shuttle Endeavour at Launch Pad 39A for installation in the aft compartment of the payload bay. The original E-MEC became suspect during the Jan. 31 launch countdown and mission STS-99 was delayed when NASA managers decided to replace it. Each Shuttle carries two enhanced master events controllers (E-MECs), which provide relays for onboard flight computers to send signals to arm and fire pyrotechnics that separate the solid rockets and external tank during assent. Both E-MECs are needed for the Shuttle to be cleared for flight. Currently Endeavour and Columbia are the only two orbiters with the E-MECs. Built by Rockwell's Satellite Space Electronics Division, Anaheim, Calif., each unit weighs 65 pounds and is approximately 20 inches long, 13 inches wide and 8 inches tall. Previously, three Shuttle flights have been scrubbed or delayed due to faulty MECs: STS-73, STS-49 and STS-41-D. The next scheduled date for launch of STS-99 is Feb. 11 at 12:30 p.m. EST.

The capability concept – On how to define and describe capability in relation to risk, vulnerability and resilience

International Nuclear Information System (INIS)

Lindbom, Hanna; Tehler, Henrik; Eriksson, Kerstin; Aven, Terje

2015-01-01

Capabilities-based planning and capability assessment are high on the agendas of several countries and organisations as part of their risk management and emergency preparedness. Despite this, few definitions of capability exist, and they are not easily related to concepts such as risk, vulnerability and resilience. The aim of the present study was thus to broaden the scientific basis of the risk field to also include the concept of capability. The proposed definition is based on a recently developed risk framework, and we define capability as the uncertainty about and the severity of the consequences of an activity given the occurrence of the initiating event and the performed task. We provide examples of how the response capability for a fictive scenario can be described using this definition, and illustrate how our definition can be used to analyse capability assessments prepared according to the Swedish crisis management system. We have analysed the content of 25 capability assessments produced in 2011 by stakeholders on local, regional and national level. It was concluded that none addressed uncertainty to any appreciable extent, and only a third described capability in terms of consequences and task, making it difficult to relate these capability assessments to risk assessments. - Highlights: • Few definitions of capability relate to definitions of risk, vulnerability and resilience. • We relate capability to risk, vulnerability and resilience. • We define capability using the components uncertainty, consequences, event and task

Optical see-through head-mounted display with occlusion capability

Science.gov (United States)

Gao, Chunyu; Lin, Yuxiang; Hua, Hong

2013-05-01

Lack of mutual occlusion capability between computer-rendered and real objects is one of fundamental problems for most existing optical see-through head-mounted displays (OST-HMD). Without the proper occlusion management, the virtual view through an OST-HMD appears "ghost-like", floating in the real world. To address this challenge, we have developed an innovative optical scheme that uniquely combines the eyepiece and see-through relay optics to achieve an occlusion-capable OST-HMD system with a very compelling form factor and high optical performances. The proposed display system was based on emerging freeform optical design technologies and was designed for highly efficient liquid crystal on silicon (LCoS) type spatial light modulator (SLM) and bright Organic LED (OLED) microdisplay. The proposed display technology was capable of working in both indoor and outdoor environments. Our current design offered a 1280x1024 color resolution based on 0.8" microdisplay and SLM. The MTF values for the majority of the fields at the cutoff frequency of 40lps/mm, which is determined by the pixel size of the microdisplay, are better than 15%. The design achieved a diagonal FOV of 40 degrees, 31.7 degrees horizontally and 25.6 degrees vertically, an exit pupil diameter of 8mm (non-vignetted), and an eye clearance of 18mm. The optics weights about 20 grams per eye. Our proposed occlusion capable OST-HMD system can easily find myriads of applications in various military and commercial sectors such as military training, gaming and entertainment.

High-voltage high-current triggering vacuum switch

International Nuclear Information System (INIS)

Alferov, D.F.; Bunin, R.A.; Evsin, D.V.; Sidorov, V.A.

2012-01-01

Experimental investigations of switching and breaking capacities of the new high current triggered vacuum switch (TVS) are carried out at various parameters of discharge current. It has been shown that the high current triggered vacuum switch TVS can switch repeatedly a current from units up to ten kiloampers with duration up to ten millisecond [ru

IEDA [Intelligent Eddy Current Data Analysis] helps make sense of eddy current data [steam generators

International Nuclear Information System (INIS)

Clark, R.

1989-01-01

The increasing sophistication of eddy current signal interpretation in steam generator tubing has improved capabilities, but has also made the process of analysis more complex and time consuming. Westinghouse has developed an intelligent computerised tool - the IEDA (Intelligent Eddy Current Data Analysis) system, to lighten the load on analysts. Since 1985, 44 plants have been inspected with IEDA, representing over 400,000 tubes. The system has provided a repeatability and a consistency not achieved by human operators. (U.K.)

Human push capability.

Science.gov (United States)

Barnett, Ralph L; Liber, Theodore

2006-02-22

Use of unassisted human push capability arises from time to time in the areas of crowd and animal control, the security of locked doors, the integrity of railings, the removal of tree stumps and entrenched vehicles, the manoeuvering of furniture, and athletic pursuits such as US football or wrestling. Depending on the scenario, human push capability involves strength, weight, weight distribution, push angle, footwear/floor friction, and the friction between the upper body and the pushed object. Simple models are used to establish the relationships among these factors.

Waste management programs and capabilities within the Los Alamos Scientific Laboratory

International Nuclear Information System (INIS)

Erdal, B.R.

1978-10-01

This document briefly outlines the various programs in radioactive waste management and some related fields which are currently being pursued at LASL. Some additional proposed or known potential programs are also outlined, and some of the existing capabilities and facilities of the various divisions of the LASL which could be utilized in the solution of waste management problems are also described. This summary is intended to show the objectives and scope of our current programs, to aid in the evaluation and coordination of these programs, and to help us identify areas in which we can make additional contributions

Assessing organizational readiness for depression care quality improvement: relative commitment and implementation capability.

Science.gov (United States)

Rubenstein, Lisa V; Danz, Marjorie S; Crain, A Lauren; Glasgow, Russell E; Whitebird, Robin R; Solberg, Leif I

2014-12-02

Depression is a major cause of morbidity and cost in primary care patient populations. Successful depression improvement models, however, are complex. Based on organizational readiness theory, a practice's commitment to change and its capability to carry out the change are both important predictors of initiating improvement. We empirically explored the links between relative commitment (i.e., the intention to move forward within the following year) and implementation capability. The DIAMOND initiative administered organizational surveys to medical and quality improvement leaders from each of 83 primary care practices in Minnesota. Surveys preceded initiation of activities directed at implementation of a collaborative care model for improving depression care. To assess implementation capability, we developed composites of survey items for five types of organizational factors postulated to be collaborative care barriers and facilitators. To assess relative commitment for each practice, we averaged leader ratings on an identical survey question assessing practice priorities. We used multivariable regression analyses to assess the extent to which implementation capability predicted relative commitment. We explored whether relative commitment or implementation capability measures were associated with earlier initiation of DIAMOND improvements. All five implementation capability measures independently predicted practice leaders' relative commitment to improving depression care in the following year. These included the following: quality improvement culture and attitudes (p = 0.003), depression culture and attitudes (p commitment (p = 0.002) and prior depression quality improvement activities appeared to be associated with earlier participation in the DIAMOND initiative. The study supports the concept of organizational readiness to improve quality of care and the use of practice leader surveys to assess it. Practice leaders' relative commitment to depression care

People Capability Maturity Model. SM.

Science.gov (United States)

1995-09-01

tailored so it consumes less time and resources than a traditional software process assessment or CMU/SEI-95-MM-02 People Capability Maturity Model...improved reputation or customer loyalty. CMU/SEI-95-MM-02 People Capability Maturity Model ■ L5-17 Coaching Level 5: Optimizing Activity 1...Maturity Model CMU/SEI-95-MM-62 Carnegie-Mellon University Software Engineering Institute DTIC ELECTE OCT 2 7 1995 People Capability Maturity

Capabilities for Innovation in a Globalizing World: from Nearby or at a Distance?

OpenAIRE

Martin GJELSVIK

2014-01-01

This  paper  addresses  the  question  of  how  clustering  affects  firms’ capabilities to innovate. This paper uses a specifically tailored survey carried out in 2013 of the geographical distance and scope of collaboration for innovation of 2002 firms located in the four largest Norwegian city-regions with the rest of the country as a separate category. We find that a majority of firms are located in regional clusters. However, the  number  of  international  relations  ...

Superconducting toroidal field coil current densities for the TFCX

International Nuclear Information System (INIS)

Kalsi, S.S.; Hooper, R.J.

1985-04-01

A major goal of the Tokamak Fusion Core Experiment (TFCX) study was to minimize the size of the device and achieve lowest cost. Two key factors influencing the size of the device employing superconducting magnets are toroidal field (TF) winding current density and its nuclear heat load withstand capability. Lower winding current density requires larger radial build of the winding pack. Likewise, lower allowable nuclear heating in the winding requires larger shield thickness between the plasma and coil. In order to achieve a low-cost device, it is essential to maximize the winding's current density and nuclear heating withhstand capability. To meet the above objective, the TFCX design specification adopted as goals a nominal winding current density of 3500 A/cm 2 with 10-T peak field at the winding and peak nuclear heat load limits of 1 MW/cm 3 for the nominal design and 50 MW/cm 3 for an advanced design. This study developed justification for these current density and nuclear heat load limits

Power transistor module for high current applications

International Nuclear Information System (INIS)

Cilyo, F.F.

1975-01-01

One of the parts needed for the control system of the 400-GeV accelerator at Fermilab was a power transistor with a safe operating area of 1800A at 50V, dc current gain of 100,000 and 20 kHz bandwidth. Since the commercially available discrete devices and power hybrid packages did not meet these requirements, a power transistor module was developed which performed satisfactorily. By connecting 13 power transistors in parallel, with due consideration for network and heat dissipation problems, and by driving these 13 with another power transistor, a super power transistor is made, having an equivalent current, power, and safe operating area capability of 13 transistors. For higher capabilities, additional modules can be conveniently added. (auth)

Consumerism and the Sister Carrie's American Dream

Institute of Scientific and Technical Information of China (English)

卢亚丽

2017-01-01

From the aspect of consumerism to this text analyze Sister Carrie's"American dream"destruction. The author wholly and deeply analyzes the embodiment of consumerism in Dreiser's Sister Carrie and Dreiser's outlook and values under the effect of consumerism. To prove that the reason for destruction of Carrie's American dream is consumerism.

New Modelling Capabilities in Commercial Software for High-Gain Antennas

DEFF Research Database (Denmark)

Jørgensen, Erik; Lumholt, Michael; Meincke, Peter

2012-01-01

characterization of the reflectarray element, an initial phaseonly synthesis, followed by a full optimization procedure taking into account the near-field from the feed and the finite extent of the array. Another interesting new modelling capability is made available through the DIATOOL software, which is a new...... type of EM software tool aimed at extending the ways engineers can use antenna measurements in the antenna design process. The tool allows reconstruction of currents and near fields on a 3D surface conformal to the antenna, by using the measured antenna field as input. The currents on the antenna...... surface can provide valuable information about the antenna performance or undesired contributions, e.g. currents on a cable,can be artificially removed. Finally, the CHAMP software will be extended to cover reflector shaping and more complex materials,which combined with a much faster execution speed...

First Materials Science Research Rack Capabilities and Design Features

Science.gov (United States)

Schaefer, D.; King, R.; Cobb, S.; Whitaker, Ann F. (Technical Monitor)

2001-01-01

The first Materials Science Research Rack (MSRR-1) will accommodate dual Experiment Modules (EM's) and provide simultaneous on-orbit processing operations capability. The first international Materials Science Experiment Module for the MSRR-1 is an international cooperative research activity between NASA's Marshall Space Flight Center (MSFC) and the European Space Agency's (ESA) European Space Research and Technology Center. (ESTEC). This International Standard Payload Rack (ISPR) will contain the Materials Science Laboratory (MSL) developed by ESA as an Experiment Module. The MSL Experiment Module will accommodate several on-orbit exchangeable experiment-specific Module Inserts. Module Inserts currently planned are a Quench Module Insert, Low Gradient Furnace, Solidification with Quench Furnace, and Diffusion Module Insert. The second Experiment Module for the MSRR-1 configuration is a commercial device supplied by MSFC's Space Products Department (SPD). It includes capabilities for vapor transport processes and liquid metal sintering. This Experiment Module will be replaced on-orbit with other NASA Materials Science EMs.

A Cross-Platform Tactile Capabilities Interface for Humanoid Robots

Directory of Open Access Journals (Sweden)

Jie eMa

2016-04-01

Full Text Available This article presents the core elements of a cross-platform tactile capabilities interface (TCI for humanoid arms. The aim of the interface is to reduce the cost of developing humanoid robot capabilities by supporting reuse through cross-platform deployment. The article presents a comparative analysis of existing robot middleware frameworks, as well as the technical details of the TCI framework that builds on the the existing YARP platform. The TCI framework currently includes robot arm actuators with robot skin sensors. It presents such hardware in a platform independent manner, making it possible to write robot control software that can be executed on different robots through the TCI frameworks. The TCI framework supports multiple humanoid platforms and this article also presents a case study of a cross-platform implementation of a set of tactile protective withdrawal reflexes that have been realised on both the Nao and iCub humanoid robot platforms using the same high-level source code.

Short term Braking Capability during Power Interruptions for Integrated Matrix Converter-Motor Drives

DEFF Research Database (Denmark)

Klumpner, Christian; Blaabjerg, Frede

2002-01-01

attractive. Sinusoidal input currents and bi-directional power flow are other advantages of the matrix converter but it is less immune to power grid disturbances compared to a standard ASD. In hoisting applications, short-term braking capability during a power outage is needed until the mechanical brake...... engages or to perform more effective a combined braking.This paper proposes a new method to provide short-term braking capability during a power outage for matrix converters. A braking chopper is needed in the clamp circuit, which allows for a drastically reduction of the capacitor size. The power flow...

Physical and emotional health problems experienced by youth engaged in physical fighting and weapon carrying.

Directory of Open Access Journals (Sweden)

Sophie D Walsh

Full Text Available Then aims of the current study were 1 to provide cross-national estimates of the prevalence of physical fighting and weapon carrying among adolescents aged 11-15 years; (2 To examine the possible effects of physical fighting and weapon carrying on the occurrence of physical (medically treated injuries and emotional health outcomes (multiple health complaints among adolescents within the theoretical framework of Problem Behaviour Theory. 20,125 adolescents aged 11-15 in five countries (Belgium, Israel, USA, Canada, FYR Macedonia were surveyed via the 2006 Health Behaviour in School Aged Children survey. Prevalence was calculated for physical fighting and weapon carrying along with physical and emotional measures that potentially result from violence. Regression analyses were used to quantify associations between violence/weapon carrying and the potential health consequences within each country. Large variations in fighting and weapon carrying were observed across countries. Boys reported more frequent episodes of fighting/weapon carrying and medically attended injuries in every country, while girls reported more emotional symptoms. Although there were some notable variations in findings between different participating countries, increased weapon carrying and physical fighting were both independently and consistently associated with more frequent reports of the potential health outcomes. Adolescents engaging in fighting and weapon carrying are also at risk for physical and emotional health outcomes. Involvement in fighting and weapon carrying can be seen as part of a constellation of risk behaviours with obvious health implications. Our findings also highlight the importance of the cultural context when examining the nature of violent behaviour for adolescents.

Arts, literature and reflective writing as educational strategies to promote narrative reasoning capabilities among physiotherapy students.

Science.gov (United States)

Caeiro, Carmen; Cruz, Eduardo Brazete; Pereira, Carla Mendes

2014-11-01

The use of arts, literature and reflective writing has becoming increasingly popular in health professionals education. However, research examining its contribution as an educational strategy to promote narrative reasoning capabilities is limited, particularly from the students' perspective. This study aimed to explore the final year physiotherapy students' perspectives about the contribution of arts, literature and reflective writing in facilitating narrative reasoning capabilities. Three focus group meetings using a semi-structured interview schedule were carried out to collect data. Focus group sessions were audiotaped and transcribed verbatim. Interpretative phenomenological analysis was used to conduct the study and analyze the transcripts. Three themes emerged: (1) developmental understanding of the patients' experiences; (2) developmental understanding about the self; and (3) embedding reflection in clinical practice. Students emphasized an increasing capability to be sensitive and vicariously experience the patient's experience. Through reflective writing, students reported they became more capable of thinking critically about their practice and learning needs for continuous professional development. Finally, students highlighted the contribution of these strategies in making reflection part of their practice. Final year physiotherapy students reported enhanced skills of narrative reasoning. The findings support the inclusion of these strategies within the undergraduate physiotherapy curricula.

Transfer of stem cells carrying engineered chromosomes with XY clone laser system.

Science.gov (United States)

Sinko, Ildiko; Katona, Robert L

2011-01-01

Current transgenic technologies for gene transfer into the germline of mammals cause a random integration of exogenous naked DNA into the host genome that can generate undesirable position effects as well as insertional mutations. The vectors used to generate transgenic animals are limited by the amount of foreign DNA they can carry. Mammalian artificial chromosomes have large DNA-carrying capacity and ability to replicate in parallel with, but without integration into, the host genome. Hence they are attractive vectors for transgenesis, cellular protein production, and gene therapy applications as well. ES cells mediated chromosome transfer by conventional blastocyst injection has a limitation in unpredictable germline transmission. The demonstrated protocol of laser-assisted microinjection of artificial chromosome containing ES cells into eight-cell mouse embryos protocol described here can solve the problem for faster production of germline transchromosomic mice.

Unpacking dynamic capability : a design perspective

NARCIS (Netherlands)

Mulders, D.E.M.; Romme, A.G.L.; Bøllingtoft, A.; Håkonsson, D.D.; Nielsen, J.F.; Snow, C.C; Ulhøi, J.

2009-01-01

This chapter reviews the dynamic capability literature to explore relationships between definition, operationalization, and measurement of dynamic capability. Subsequently, we develop a design-oriented approach toward dynamic capability that distinguishes between design rules, recurrent patterns of

Summary of Sandia Laboratories technical capabilities

International Nuclear Information System (INIS)

1977-05-01

The technical capabilities of Sandia Laboratories are detailed in a series of companion reports. In this summary the use of the capabilities in technical programs is outlined and the capabilities are summarized. 25 figures, 3 tables

Evaluation of advanced and current leak detection systems

International Nuclear Information System (INIS)

Kupperman, D.S.

1988-01-01

U.S. Nuclear Regulatory Commission Guide 1.45 recommends the use of at least three different detection methods in reactors to detect leakage. Monitoring of both sump-flow and airborne particulate radioactivity is mandatory. A third method can involve either monitoring of condensate flow rate from air coolers or monitoring of airborne gaseous radioactivity. Although the methods currently used for leak detection reflect the state of the art, other techniques may be developed and used. Since the recommendations of Regulatory Guide 1.45 are not mandatory, Licensee Event Report Compilations have been reviewed to help establish actual capabilities for leak detection. The review of event reports, which had previously covered the period of June 1985 to August 1986 has been extended, and now covers events to June 1987. The total number of significant events is now 83. These reports have provided documented, sometimes detailed, summaries of reactor leaks. They have helped establish the capabilities of existing systems to detect and locate leaks. Differences between PWRs and BWRs with regard to leak detection have now been analyzed. With regard to detection methods, the greatest differences between reactor types are as follows: (a) The sump pump is reported as the detection method more frequently in BWRs than in PWRs (64% vs. 35%). (b) The radiation monitor is reported as the detection method (excluding false alarms) more frequently in PWRs. Current efforts at Argonne National Laboratory (ANL) to evaluate advanced acoustic leak detection methods are directed toward the generation and analysis of acoustic data from large (0.5 to 10 gal/min) leaks and modification of the software of the GARD/ANL advanced acoustic leak detection system. In order to reach the goal of 10 gal/min leaks, the Steam Generator Test Facility at ANL has been modified to carry out the leak testing. Tests were carried out with water at 525 deg. F and 1100 psi leaking through a fatigue crack in a 4-in

Inward Internationalization of African-Ethnic Restaurants: The Role of Managerial Dynamic Capabilities

Directory of Open Access Journals (Sweden)

Samson Omuudu OTENGEI

2016-12-01

Full Text Available This paper empirically tests the link between cultural orientation, market orientation, service innovation capabilities of owner-managers and the level of inward internationalisation of African-ethnic restaurants. Data were obtained from 201 African-ethnic restaurants. A twostep approach was used, i.e. (i a confirmatory factor analysis (CFA to generate a measurement model; and (ii a structural equation model (SEM to test the hypotheses. All the predictor variables are positively and significantly related to the degree of inward internationalisation and the relationship is strong enough to cause a 41 per cent variance. Since it is cross-sectional in design, the study cannot be fully relied upon to draw inferences regarding causality among the variables. The results suggest that owner-managers who develop the three capabilities succeed in enhancing inward internationalisation. The current study could be among the very few to propose a framework that brings together major managerial (dynamic capabilities that are presumed to be vital in enhancing inward internationalisation.

Sandia Laboratories technical capabilities: testing

International Nuclear Information System (INIS)

Lundergan, C.D.

1975-12-01

The testing capabilities at Sandia Laboratories are characterized. Selected applications of these capabilities are presented to illustrate the extent to which they can be applied in research and development programs

Simple, high current, antimony ion source

International Nuclear Information System (INIS)

Sugiura, H.

1979-01-01

A simple metal ion source capable of producing a continuous, uncontaminated, high current beam of Sb ions is presented. It produced a total ion current of 200 μA at 1 kV extraction voltage. A discharge occurred in the source at a pressure of 6 x 10 -4 Torr. The ion current extracted from the source increased with the 3/2 power of the extraction voltage. The perveance of the source and ion density in the plasma were 8 x 10 -9 and 1.8 x 10 11 cm -3 , respectively

Capability Development in an Offshoring Context

DEFF Research Database (Denmark)

Jaura, Manya

Capability development can be defined as deliberate firm-level investment involving a search and learning process aimed at modifying or enhancing existing capabilities. Increasingly, firms are relocating advanced services to offshore locations resulting in the challenge of capability development ...

The Concept of Carrying Capacity in Tourism

Directory of Open Access Journals (Sweden)

Josef Zelenka

2014-05-01

Full Text Available Carrying capacity is often pragmatically, theoretically as well as purely intuitively considered as a concept in the context of tourism sustainability. The carrying capacity application has the greatest potential in protected areas, in frequently visited cultural and natural attractions, and in relation to sustaining of the lifestyle of the local community and tourism destination potential in general. Despite its importance, partial applications, determination of basic theoretical principles, and specifying connection to the other theoretical concepts in tourism (particularly destination life cycle, LAC concept, visitors management, there still is a rightful opinion of some authors suggesting that there is no consistent theory of tourism carrying capacity. This theory would be the base for sophisticated practical carrying capacity applications. This paper is therefore focused on introduction of the theoretical concept of carrying capacity, which can be discussed and possibly further elaborated.

Sandia Laboratories technical capabilities: electronics

International Nuclear Information System (INIS)

Lundergan, C.D.

1975-12-01

This report characterizes the electronics capabilities at Sandia Laboratories. Selected applications of these capabilities are presented to illustrate the extent to which they can be applied in research and development programs

Improvements in TREAT hodoscope fuel-motion capabilities

International Nuclear Information System (INIS)

Fink, C.L.; Boyar, R.E.; Eichholz, J.J.; DeVolpi, A.

1982-01-01

The fast-neutron detection system of the hadoscope has been a major ingredient in the success of the hodoscope as a fuel-motion monitoring device. While the original Hornyak-button detector system has met most of the current fuel-motion needs, the more stringent requirements of improved reactor-safety codes, and of new experimental test facilities necessitate improved detection capabilities. Development efforts have centered on three areas: the construction of an array of proton-recoil proportional counters to be used in conjunction with the Hornyak-button detectors, the upgrading of the Hornyak-button detectors to increase linearity and signal-to-background ratio, and the intercalibration of detectors using a modified horizontal and a new vertical scan system

Combining Land Capability Evaluation, Geographic Information ...

African Journals Online (AJOL)

Combining Land Capability Evaluation, Geographic Information Systems, AnD Indigenous Technologies for Soil Conservation in Northern Ethiopia. ... Land capability and land use status were established following the procedures of a modified treatment-oriented capability classification using GIS. The case study ...

Substrate decoration for improvement of current-carrying capabilities of YBa₂Cu₃O_x thin films

DEFF Research Database (Denmark)

Khoryushin, Alexey; Mozhaev, Peter; Mozhaeva, Julia

2013-01-01

The effects of substrate decoration with yttria and Y:ZrO2 on the structural and electrical properties of the YBa2Cu3Ox (YBCO) thin films are studied. The films were deposited on (LaAlO3)3–(Sr2AlTaO8)7 substrates by pulsed laser deposition. Two different structures of decoration layer were applie...

Designing and Validating a Model for Measuring Sustainability of Overall Innovation Capability of Small and Medium-Sized Enterprises

Directory of Open Access Journals (Sweden)

Mohd Nizam Ab Rahman

2015-01-01

Full Text Available The business environment is currently characterized by intensified competition at both the national and firm levels. Many studies have shown that innovation positively affect firms in enhancing their competitiveness. Innovation is a dynamic process that requires a continuous, evolving, and mastered management. Evaluating the sustainability of overall innovation capability of a business is a major means of determining how well this firm effectively and efficiently manages its innovation process. A psychometrically valid scale of evaluating the sustainability of overall innovation capability of a firm is still insufficient in the current innovation literature. Thus, this study developed a reliable and valid scale of measuring the sustainability of overall innovation capability construct. The unidimensionality, reliability, and several validity components of the developed scale were tested using the data collected from 175 small and medium-sized enterprises in Iran. A series of systematic statistical analyses were performed. Results of the reliability measures, exploratory and confirmatory factor analyses, and several components of validity tests strongly supported an eight-dimensional (8D scale of measuring the sustainability of overall innovation capability construct. The dimensions of the scale were strategic management, supportive culture and structure, resource allocation, communication and networking, knowledge and technology management, idea management, project development, and commercialization capabilities.

Eddy current crack detection capability assessment approach using crack specimens with differing electrical conductivity

Science.gov (United States)

Koshti, Ajay M.

2018-03-01

Like other NDE methods, eddy current surface crack detectability is determined using probability of detection (POD) demonstration. The POD demonstration involves eddy current testing of surface crack specimens with known crack sizes. Reliably detectable flaw size, denoted by, a90/95 is determined by statistical analysis of POD test data. The surface crack specimens shall be made from a similar material with electrical conductivity close to the part conductivity. A calibration standard with electro-discharged machined (EDM) notches is typically used in eddy current testing for surface crack detection. The calibration standard conductivity shall be within +/- 15% of the part conductivity. This condition is also applicable to the POD demonstration crack set. Here, a case is considered, where conductivity of the crack specimens available for POD testing differs by more than 15% from that of the part to be inspected. Therefore, a direct POD demonstration of reliably detectable flaw size is not applicable. Additional testing is necessary to use the demonstrated POD test data. An approach to estimate the reliably detectable flaw size in eddy current testing for part made from material A using POD crack specimens made from material B with different conductivity is provided. The approach uses additional test data obtained on EDM notch specimens made from materials A and B. EDM notch test data from the two materials is used to create a transfer function between the demonstrated a90/95 size on crack specimens made of material B and the estimated a90/95 size for part made of material A. Two methods are given. For method A, a90/95 crack size for material B is given and POD data is available. Objective of method A is to determine a90/95 crack size for material A using the same relative decision threshold that was used for material B. For method B, target crack size a90/95 for material A is known. Objective is to determine decision threshold for inspecting material A.

Remote field eddy current testing of ferromagnetic tubes

International Nuclear Information System (INIS)

David, B.

1990-01-01

In order to test ferromagnetic tubes using internal probes, Intercontrole and the CEA have carried out theoretical and experimental works and developed a method to adapt the Remote Field Eddy Current technique which has been known and used for 30 years now. This document briefly recalls the basic principles of the Remote Field Eddy Current technique, the various steps of the works carried out and mainly describes examples of field inspection of ferromagnetic tubes and pipes [fr

INTEGRATION OF FACILITY MODELING CAPABILITIES FOR NUCLEAR NONPROLIFERATION ANALYSIS

Energy Technology Data Exchange (ETDEWEB)

Gorensek, M.; Hamm, L.; Garcia, H.; Burr, T.; Coles, G.; Edmunds, T.; Garrett, A.; Krebs, J.; Kress, R.; Lamberti, V.; Schoenwald, D.; Tzanos, C.; Ward, R.

2011-07-18

Developing automated methods for data collection and analysis that can facilitate nuclear nonproliferation assessment is an important research area with significant consequences for the effective global deployment of nuclear energy. Facility modeling that can integrate and interpret observations collected from monitored facilities in order to ascertain their functional details will be a critical element of these methods. Although improvements are continually sought, existing facility modeling tools can characterize all aspects of reactor operations and the majority of nuclear fuel cycle processing steps, and include algorithms for data processing and interpretation. Assessing nonproliferation status is challenging because observations can come from many sources, including local and remote sensors that monitor facility operations, as well as open sources that provide specific business information about the monitored facilities, and can be of many different types. Although many current facility models are capable of analyzing large amounts of information, they have not been integrated in an analyst-friendly manner. This paper addresses some of these facility modeling capabilities and illustrates how they could be integrated and utilized for nonproliferation analysis. The inverse problem of inferring facility conditions based on collected observations is described, along with a proposed architecture and computer framework for utilizing facility modeling tools. After considering a representative sampling of key facility modeling capabilities, the proposed integration framework is illustrated with several examples.

Integration of facility modeling capabilities for nuclear nonproliferation analysis

International Nuclear Information System (INIS)

Garcia, Humberto; Burr, Tom; Coles, Garill A.; Edmunds, Thomas A.; Garrett, Alfred; Gorensek, Maximilian; Hamm, Luther; Krebs, John; Kress, Reid L.; Lamberti, Vincent; Schoenwald, David; Tzanos, Constantine P.; Ward, Richard C.

2012-01-01

Developing automated methods for data collection and analysis that can facilitate nuclear nonproliferation assessment is an important research area with significant consequences for the effective global deployment of nuclear energy. Facility modeling that can integrate and interpret observations collected from monitored facilities in order to ascertain their functional details will be a critical element of these methods. Although improvements are continually sought, existing facility modeling tools can characterize all aspects of reactor operations and the majority of nuclear fuel cycle processing steps, and include algorithms for data processing and interpretation. Assessing nonproliferation status is challenging because observations can come from many sources, including local and remote sensors that monitor facility operations, as well as open sources that provide specific business information about the monitored facilities, and can be of many different types. Although many current facility models are capable of analyzing large amounts of information, they have not been integrated in an analyst-friendly manner. This paper addresses some of these facility modeling capabilities and illustrates how they could be integrated and utilized for nonproliferation analysis. The inverse problem of inferring facility conditions based on collected observations is described, along with a proposed architecture and computer framework for utilizing facility modeling tools. After considering a representative sampling of key facility modeling capabilities, the proposed integration framework is illustrated with several examples.

Integration Of Facility Modeling Capabilities For Nuclear Nonproliferation Analysis

International Nuclear Information System (INIS)

Gorensek, M.; Hamm, L.; Garcia, H.; Burr, T.; Coles, G.; Edmunds, T.; Garrett, A.; Krebs, J.; Kress, R.; Lamberti, V.; Schoenwald, D.; Tzanos, C.; Ward, R.

2011-01-01

Developing automated methods for data collection and analysis that can facilitate nuclear nonproliferation assessment is an important research area with significant consequences for the effective global deployment of nuclear energy. Facility modeling that can integrate and interpret observations collected from monitored facilities in order to ascertain their functional details will be a critical element of these methods. Although improvements are continually sought, existing facility modeling tools can characterize all aspects of reactor operations and the majority of nuclear fuel cycle processing steps, and include algorithms for data processing and interpretation. Assessing nonproliferation status is challenging because observations can come from many sources, including local and remote sensors that monitor facility operations, as well as open sources that provide specific business information about the monitored facilities, and can be of many different types. Although many current facility models are capable of analyzing large amounts of information, they have not been integrated in an analyst-friendly manner. This paper addresses some of these facility modeling capabilities and illustrates how they could be integrated and utilized for nonproliferation analysis. The inverse problem of inferring facility conditions based on collected observations is described, along with a proposed architecture and computer framework for utilizing facility modeling tools. After considering a representative sampling of key facility modeling capabilities, the proposed integration framework is illustrated with several examples.

Developing Flexible, High Performance Polymers with Self-Healing Capabilities

Science.gov (United States)

Jolley, Scott T.; Williams, Martha K.; Gibson, Tracy L.; Caraccio, Anne J.

2011-01-01

Flexible, high performance polymers such as polyimides are often employed in aerospace applications. They typically find uses in areas where improved physical characteristics such as fire resistance, long term thermal stability, and solvent resistance are required. It is anticipated that such polymers could find uses in future long duration exploration missions as well. Their use would be even more advantageous if self-healing capability or mechanisms could be incorporated into these polymers. Such innovative approaches are currently being studied at the NASA Kennedy Space Center for use in high performance wiring systems or inflatable and habitation structures. Self-healing or self-sealing capability would significantly reduce maintenance requirements, and increase the safety and reliability performance of the systems into which these polymers would be incorporated. Many unique challenges need to be overcome in order to incorporate a self-healing mechanism into flexible, high performance polymers. Significant research into the incorporation of a self-healing mechanism into structural composites has been carried out over the past decade by a number of groups, notable among them being the University of I1linois [I]. Various mechanisms for the introduction of self-healing have been investigated. Examples of these are: 1) Microcapsule-based healant delivery. 2) Vascular network delivery. 3) Damage induced triggering of latent substrate properties. Successful self-healing has been demonstrated in structural epoxy systems with almost complete reestablishment of composite strength being achieved through the use of microcapsulation technology. However, the incorporation of a self-healing mechanism into a system in which the material is flexible, or a thin film, is much more challenging. In the case of using microencapsulation, healant core content must be small enough to reside in films less than 0.1 millimeters thick, and must overcome significant capillary and surface

Preliminary research on quantitative methods of water resources carrying capacity based on water resources balance sheet

Science.gov (United States)

Wang, Yanqiu; Huang, Xiaorong; Gao, Linyun; Guo, Biying; Ma, Kai

2018-06-01

Water resources are not only basic natural resources, but also strategic economic resources and ecological control factors. Water resources carrying capacity constrains the sustainable development of regional economy and society. Studies of water resources carrying capacity can provide helpful information about how the socioeconomic system is both supported and restrained by the water resources system. Based on the research of different scholars, major problems in the study of water resources carrying capacity were summarized as follows: the definition of water resources carrying capacity is not yet unified; the methods of carrying capacity quantification based on the definition of inconsistency are poor in operability; the current quantitative research methods of water resources carrying capacity did not fully reflect the principles of sustainable development; it is difficult to quantify the relationship among the water resources, economic society and ecological environment. Therefore, it is necessary to develop a better quantitative evaluation method to determine the regional water resources carrying capacity. This paper proposes a new approach to quantifying water resources carrying capacity (that is, through the compilation of the water resources balance sheet) to get a grasp of the regional water resources depletion and water environmental degradation (as well as regional water resources stock assets and liabilities), figure out the squeeze of socioeconomic activities on the environment, and discuss the quantitative calculation methods and technical route of water resources carrying capacity which are able to embody the substance of sustainable development.

Putting Role 1 first: the Role 1 capability review.

Science.gov (United States)

Hodgetts, T J; Findlay, S

2012-09-01

To quantify the risk for delivering care at Role 1 in the Land Environment (point of wounding to hospital care) on current operations and set the conditions for systematic change to enhance future capability. UK, US and Danish Army Role 1 Subject Matter Experts (SMEs) (1) Questionnaire study ofUK SMEs to determine capability gaps; (2) Questionnaire study of US and Danish SMEs to benchmark UK capability; (3) Semi-structured interviews of UK SMEs; (4) In-theatre evaluation of deployed Role 1. Thirty two SMEs completed the questionnaire (68% response rate), comprising 25 medical officers (20 in clinical appointments; five in command and staff appointments), six nurses and one medical support officer. Results of the entire review were collated as a cross-Defence Lines of Development analysis, separating the specific experience of 1 Medical Regiment's Hybrid Foundation Training (HFT), Mission Specific Training (MST) and deployment cycle from the analysis gained from questionnaire studies, SME consultation and documentary evidence. The review generated 77 recommendations and 38 sub-recommendations. The top six messages of the review were (1) To balance the expressed desire to increase the ratio of trained Team Medics with the reality of generating credible instructors with clinical experience; (2) To recognise that inadequate experience for Combat Medical Technicians in Primary Healthcare in the Firm Base undermines their operational preparedness; (3) To recognise that Current Regimental Aid Post (RAP) at contingency without power lacks the rudimentary infrastructure of a modern Medical Treatment Facility; (4) To recognise that inappropriate deployment of personnel with chronic disease or acutely limiting conditions is a consistent trend for 20 years that highlights continuing system weaknesses in applying protective medical grading; (5) To accept that General Practitioner manning requires re-evaluating as an Operational Pinch Point, reviewing all options to maintain

Novel method to improve power handling capability for coplanar waveguide high-temperature superconducting filter

Energy Technology Data Exchange (ETDEWEB)

Satoh, K; Koizumi, D; Narahashi, S [NTT DoCoMo, Inc., 3-5 Hikari-no-oka, 239-8536 Yokosuka (Japan)

2006-06-01

This paper proposes a novel method to improve the power handling capability of a coplanar waveguide (CPW) high-temperature superconducting (HTS) filter. The noteworthy point of the proposed method is that it is based on the concept that the power handling capability is improved by reducing the maximum current density of the filter. Numerical investigations confirm that a CPW HTS filter using 66-{omega} characteristic impedance resonators (66-{omega} CPW HTSF) reduces the maximum current density compared to that using conventional 50-{omega} resonators (50-{omega} CPW HTSF). We fabricated 5-GHz band four-pole Chevyshev CPW HTSFs based on the proposed and conventional methods. The fabricated 66-{omega} CPW HTSF exhibited the third-order intercept point (TOI) of + 61 dBm while the 50-{omega} CPW HTSF exhibited the TOI of + 54 dBm, both at 60 K. These results indicate the effectiveness of the proposed method.

Information Management in Creative Engineering Design and Capabilities of Database Transactions

DEFF Research Database (Denmark)

Jacobsen, Kim; Eastman, C. A.; Jeng, T. S.

1997-01-01

This paper examines the information management requirements and sets forth the general criteria for collaboration and concurrency control in creative engineering design. Our work attempts to recognize the full range of concurrency, collaboration and complex transactions structure now practiced...... in manual and semi-automated design and the range of capabilities needed as the demands for enhanced but flexible electronic information management unfolds.The objective of this paper is to identify new issues that may advance the use of databases to support creative engineering design. We start...... with a generalized description of the structure of design tasks and how information management in design is dealt with today. After this review, we identify extensions to current information management capabilities that have been realized and/or proposed to support/augment what designers can do now. Given...

Improving the Current DHS Capabilities Framework

Science.gov (United States)

2008-09-01

Laboratories ( PNL ) to establish the standards for the NIMS initiative. This entire situation creates another set of inconsistencies in criteria for...www.hsaj.org/?fullarticle=1.2.2, (accessed June 12, 2007), 8. 24 setting agencies: NFPA, PNL , American National Standards Institute (ANSI), and...with Pacific Northwest Laboratory ( PNL ) to develop the NIC standards. The Incident Management Standards Working Group (IMSWG) was established

Quantumness-generating capability of quantum dynamics

Science.gov (United States)

Li, Nan; Luo, Shunlong; Mao, Yuanyuan

2018-04-01

We study quantumness-generating capability of quantum dynamics, where quantumness refers to the noncommutativity between the initial state and the evolving state. In terms of the commutator of the square roots of the initial state and the evolving state, we define a measure to quantify the quantumness-generating capability of quantum dynamics with respect to initial states. Quantumness-generating capability is absent in classical dynamics and hence is a fundamental characteristic of quantum dynamics. For qubit systems, we present an analytical form for this measure, by virtue of which we analyze several prototypical dynamics such as unitary dynamics, phase damping dynamics, amplitude damping dynamics, and random unitary dynamics (Pauli channels). Necessary and sufficient conditions for the monotonicity of quantumness-generating capability are also identified. Finally, we compare these conditions for the monotonicity of quantumness-generating capability with those for various Markovianities and illustrate that quantumness-generating capability and quantum Markovianity are closely related, although they capture different aspects of quantum dynamics.

Designing Technology: An Exploration of the Relationship between Technological Literacy and Design Capability

Science.gov (United States)

Hope, Gill

2013-01-01

The aim of this article is to contribute to the debate on the nature of technology education. This is especially pertinent at times of curriculum change and uncertainty, such as currently exist in relation to the Primary school curriculum in England and Wales. Two phrases ("technological literacy" and "design capability") have…

Refueling machine with relative positioning capability

International Nuclear Information System (INIS)

Challberg, R.C.; Jones, C.R.

1998-01-01

A refueling machine is disclosed having relative positioning capability for refueling a nuclear reactor. The refueling machine includes a pair of articulated arms mounted on a refueling bridge. Each arm supports a respective telescoping mast. Each telescoping mast is designed to flex laterally in response to application of a lateral thrust on the end of the mast. A pendant mounted on the end of the mast carries an air-actuated grapple, television cameras, ultrasonic transducers and waterjet thrusters. The ultrasonic transducers are used to detect the gross position of the grapple relative to the bail of a nuclear fuel assembly in the fuel core. The television cameras acquire an image of the bail which is compared to a pre-stored image in computer memory. The pendant can be rotated until the television image and the pre-stored image match within a predetermined tolerance. Similarly, the waterjet thrusters can be used to apply lateral thrust to the end of the flexible mast to place the grapple in a fine position relative to the bail as a function of the discrepancy between the television and pre-stored images. 11 figs

Refueling machine with relative positioning capability

Science.gov (United States)

Challberg, R.C.; Jones, C.R.

1998-12-15

A refueling machine is disclosed having relative positioning capability for refueling a nuclear reactor. The refueling machine includes a pair of articulated arms mounted on a refueling bridge. Each arm supports a respective telescoping mast. Each telescoping mast is designed to flex laterally in response to application of a lateral thrust on the end of the mast. A pendant mounted on the end of the mast carries an air-actuated grapple, television cameras, ultrasonic transducers and waterjet thrusters. The ultrasonic transducers are used to detect the gross position of the grapple relative to the bail of a nuclear fuel assembly in the fuel core. The television cameras acquire an image of the bail which is compared to a pre-stored image in computer memory. The pendant can be rotated until the television image and the pre-stored image match within a predetermined tolerance. Similarly, the waterjet thrusters can be used to apply lateral thrust to the end of the flexible mast to place the grapple in a fine position relative to the bail as a function of the discrepancy between the television and pre-stored images. 11 figs.

MR imaging of the lumber spine; Visualization capability of the nerve root

Energy Technology Data Exchange (ETDEWEB)

Ishibashi, Kazumasa; Hieda, Hiroshi; Goto, Takeshi; Goto, Hiroshi; Koga, Hiromichi; Hiraoka, Kouji (Moji Rousai Hospital, Fukuoka (Japan))

1991-01-01

We studied visualization capability of the nerve root in mainly coronary section pattern using magnetic resonance imaging (MRI). MRI was carried out in 91 patients with lumbago and sciatica. Coronary section was additionally photographed in 58 cases of these patients (32 with intervertebral hernia, 20 with spinal canal stenosis, 2 with spondylolytic spondylolisthesis, 2 with compression fracture and the other 2 patients). The visualization capability of the nerve root was studied with photographing 2 pulse systems of the coronary section by using spin echo and field echo methods. The high signal area of the cerebrospinal fluid and nerve root in the normal lumbar vertebra was noted by field echo method, and pattern that is visualized by myelogram was obtained. The coincidence of the main foci (disturbed lesions of the nerve root) in the intervertebral hernia and coronary section pattern was noted in 21 of 32 cases (64.5%) with considerably high ratio. The condition of the nerve root in the blocked lesion was visualized in the spinal canal stenosis. (author).

Direct current power delivery system and method

Science.gov (United States)

Zhang, Di; Garces, Luis Jose; Dai, Jian; Lai, Rixin

2016-09-06

A power transmission system includes a first unit for carrying out the steps of receiving high voltage direct current (HVDC) power from an HVDC power line, generating an alternating current (AC) component indicative of a status of the first unit, and adding the AC component to the HVDC power line. Further, the power transmission system includes a second unit for carrying out the steps of generating a direct current (DC) voltage to transfer the HVDC power on the HVDC power line, wherein the HVDC power line is coupled between the first unit and the second unit, detecting a presence or an absence of the added AC component in the HVDC power line, and determining the status of the first unit based on the added AC component.

Characterisation of the incident beam and current diffraction capabilities on the VESUVIO spectrometer

Science.gov (United States)

Romanelli, G.; Krzystyniak, M.; Senesi, R.; Raspino, D.; Boxall, J.; Pooley, D.; Moorby, S.; Schooneveld, E.; Rhodes, N. J.; Andreani, C.; Fernandez-Alonso, F.

2017-09-01

The VESUVIO spectrometer at the ISIS pulsed neutron and muon source is a unique instrument amongst those available at neutron facilities. This is the only inverted-geometry neutron spectrometer accessing values of energy and wavevector transfer above tens of eV and {\\mathringA}-1 , respectively, and where deep inelastic neutron scattering experiments are routinely performed. As such, the procedure at the base of the technique has been previously described in an article published by this journal (Mayers and Reiter 2012 Meas. Sci. Technol. 23 045902). The instrument has recently witnessed an upsurge of interest due to a new trend to accommodate, within a single experiment, neutron diffraction and transmission measurements in addition to deep inelastic neutron scattering. This work presents a broader description of the instrument following these recent developments. In particular, we assess the absolute intensity and two-dimensional profile of the incident neutron beam and the capabilities of the backscattering diffraction banks. All results are discussed in the light of recent changes to the moderator viewed by the instrument. We find that VESUVIO has to be considered a high-resolution diffractometer as much as other diffractometers at ISIS, with a resolution as high as 2× 10-3 in backscattering. Also, we describe the extension of the wavelength range of the instrument to include lower neutron energies for diffraction measurements, an upgrade that could be readily applied to other neutron instruments as well.

Distinctive Dynamic Capabilities for New Business Creation

DEFF Research Database (Denmark)

Rosenø, Axel; Enkel, Ellen; Mezger, Florian

2013-01-01

This study examines the distinctive dynamic capabilities for new business creation in established companies. We argue that these are very different from those for managing incremental innovation within a company's core business. We also propose that such capabilities are needed in both slow...... and fast-paced industries, and that similarities exist across industries. Hence, the study contributes to dynamic capabilities literature by: 1) identifying the distinctive dynamic capabilities for new business creation; 2) shifting focus away from dynamic capabilities in environments characterised by high...... clock-speed and uncertainty towards considering dynamic capabilities for the purpose of developing new businesses, which also implies a high degree of uncertainty. Based on interviews with 33 companies, we identify distinctive dynamic capabilities for new business creation, find that dynamic...

Organisational Capability--What Does It Mean?

Science.gov (United States)

National Centre for Vocational Education Research (NCVER), 2006

2006-01-01

Organisational capability is rapidly becoming recognized as the key to organizational success. However, the lack of research on it has been well documented in the literature, and organizational capability remains an elusive concept. Yet an understanding of organizational capability can offer insights into how RTOs might work most effectively,…

LLNL current meter array--concept and system description

Energy Technology Data Exchange (ETDEWEB)

Mantrom, D.D. [Lawrence Livermore National Lab., CA (United States)

1994-11-15

A measurement capability using a horizontal array of 10 S4 current meters mounted on a stiff floating structure with 35 m aperture has been developed to support interpretation of radar imaging of surface effects associated with internal waves. This system has been fielded three times and most recently, has collected data alongside the sea-surface footprint of a land-fixed radar imaging ship-generated internal waves. The underlying need for this measurement capability is described. The specifications resulting from this need are presented and the engineering design and deployment procedures of the platform and systems that resulted are described The current meter data are multiplexed along with meteorological and system status data on board the floating platform and are telemetered to a shore station and on to a data acquisition system. The raw data are recorded, and are then processed to form space-time images of current and strain rate (a spatial derivative of the current field). Examples of raw and processed data associated with ship-generated internal waves are presented.

Low voltage ride-through capability control for single-stage inverter-based grid-connected photovoltaic power plant

DEFF Research Database (Denmark)

Al-Shetwi, Ali Q.; Sujod, Muhamad Zahim; Blaabjerg, Frede

2018-01-01

to enhance the LVRT capability based on the Malaysian standards and modern grid codes connection requirements. The proposed control overcomes the problems of dc-link over-voltage and ac over-current that may cause disconnection or damage to the inverter. For this purpose, dc-chopper brake controller...... to improve the capability of ride-through fault safely and keep the inverter connected, but also to provide grid support through active and reactive power control at different type of faults....

Concluding Remarks: The Current Status and Future Prospects for GRB Astronomy

Science.gov (United States)

Gehrels, Neil

2009-01-01

We are in a remarkable period of discovery in GRB astronomy. The current satellites including Swift, Fermi. AGILE and INTEGRAL are detecting and observing bursts of all varieties. Increasing capabilities for follow-up observations on the ground and in space are leading to rapid and deep coverage across the electromagnetic spectrum, The future will see continued operation of the current experiments and with future missions like SVOM plus possible rni_Ssions like JANUS and EXIST. An exciting expansion of capabilities is occurring in areas of gravitational waves and neutrinos that could open new windows on the GRB phenomenon. Increased IR capabilities on the ground and with missions like JWST will enable further exploration of high redshift bursts. The future is bright.

Community psychology and the capabilities approach.

Science.gov (United States)

Shinn, Marybeth

2015-06-01

What makes for a good life? The capabilities approach to this question has much to offer community psychology, particularly with respect to marginalized groups. Capabilities are freedoms to engage in valued social activities and roles-what people can do and be given both their capacities, and environmental opportunities and constraints. Economist Amartya Sen's focus on freedoms and agency resonates with psychological calls for empowerment, and philosopher Martha Nussbaum's specification of requirements for a life that is fully human provides an important guide for social programs. Community psychology's focus on mediating structures has much to offer the capabilities approach. Parallels between capabilities, as enumerated by Nussbaum, and settings that foster positive youth development, as described in a National Research Council Report (Eccles and Gootman (Eds) in Community programs to promote youth development. National Academy Press, Washington, 2002) suggest extensions of the approach to children. Community psychologists can contribute to theory about ways to create and modify settings to enhance capabilities as well as empowerment and positive youth development. Finally, capabilities are difficult to measure, because they involve freedoms to choose but only choices actually made or enacted can be observed. The variation in activities or goals across members of a setting provides a measure of the capabilities that the setting fosters.

The flexible application of carrying capacity in ecology

Directory of Open Access Journals (Sweden)

Eric J. Chapman

2018-01-01

Full Text Available Carrying capacity encompasses a broad collection of approaches used to better understand biotic interactions in ecosystems and is often applied with no explicit regard to its historical origin. In this paper, we reviewed the primary literature to examine how carrying capacity is applied in ecology. We focused our review on ecosystem studies—studies that frame their results at the ecosystem level—published after the 1950s and highlight emerging trends of this concept. We found that while carrying capacity offers some underlying commonalities, a wide range of definitions and approaches hinders a unified framework to better understand biotic ecosystem interactions. Not surprisingly, these studies most often use K—the number of individuals that the environment “can support” in a given area—to define carrying capacity, despite considerable ambiguity and uncertainty in this approach. Furthermore, the studies that we reviewed spanned several levels of ecological organization: molecules to communities and up to landscapes. To add further complexity, it is not clear whether carrying capacity was intended as a dynamic concept subject to temporal variability as it was often applied in the reviewed studies. We found that carrying capacity is most often applied to studies in conservation biology, rangeland and wildlife management, aquaculture, and fisheries biology. We explore ecosystem level responses to implications of “carrying capacity” overshoot and discuss proposed mechanisms that govern ecosystem carrying capacity. We discuss the usefulness of the concept and end with suggestions to improve carrying capacity's general application in ecosystem studies. Keywords: Carrying capacity, Conservation biology, Ecosystems, Ecosystem management, Natural resources

An eHealth Capabilities Framework for Graduates and Health Professionals: Mixed-Methods Study

Science.gov (United States)

McGregor, Deborah; Keep, Melanie; Janssen, Anna; Spallek, Heiko; Quinn, Deleana; Jones, Aaron; Tseris, Emma; Yeung, Wilson; Togher, Leanne; Solman, Annette; Shaw, Tim

2018-01-01

Background The demand for an eHealth-ready and adaptable workforce is placing increasing pressure on universities to deliver eHealth education. At present, eHealth education is largely focused on components of eHealth rather than considering a curriculum-wide approach. Objective This study aimed to develop a framework that could be used to guide health curriculum design based on current evidence, and stakeholder perceptions of eHealth capabilities expected of tertiary health graduates. Methods A 3-phase, mixed-methods approach incorporated the results of a literature review, focus groups, and a Delphi process to develop a framework of eHealth capability statements. Results Participants (N=39) with expertise or experience in eHealth education, practice, or policy provided feedback on the proposed framework, and following the fourth iteration of this process, consensus was achieved. The final framework consisted of 4 higher-level capability statements that describe the learning outcomes expected of university graduates across the domains of (1) digital health technologies, systems, and policies; (2) clinical practice; (3) data analysis and knowledge creation; and (4) technology implementation and codesign. Across the capability statements are 40 performance cues that provide examples of how these capabilities might be demonstrated. Conclusions The results of this study inform a cross-faculty eHealth curriculum that aligns with workforce expectations. There is a need for educational curriculum to reinforce existing eHealth capabilities, adapt existing capabilities to make them transferable to novel eHealth contexts, and introduce new learning opportunities for interactions with technologies within education and practice encounters. As such, the capability framework developed may assist in the application of eHealth by emerging and existing health care professionals. Future research needs to explore the potential for integration of findings into workforce development