WorldWideScience

Sample records for cuprous chloride clusters

  1. Copper electrodeposition from cuprous chloride solutions containing lead, zinc or iron ions

    Institute of Scientific and Technical Information of China (English)

    M. Tchoumou; M. Roynette Ehics

    2005-01-01

    Cuprous chloride hydrochloric acid solutions were electrolysed in a two compartments cell without agitation for copper extraction. It is found that the current density affects the colour and the size of copper deposits. During electrodeposition of copper from cuprous solution in the presence of various concentrations of lead, zinc or iron ions at different current densities, it is observed that lead is codeposited with copper by increasing current density.In all experiments, the current efficiency for the copper deposition reaction fluctuates between 88.50% and 95.50%.

  2. Fabrication of cuprous chloride films on copper substrate by chemical bath deposition

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Yu-Ting; Ci, Ji-Wei; Tu, Wei-Chen [Department of Electronic Engineering, College of Electrical Engineering and Computer Science, Chung Yuan Christian University, Chung-Li 32023, Taiwan (China); Uen, Wu-Yih, E-mail: uenwuyih@ms37.hinet.net [Department of Electronic Engineering, College of Electrical Engineering and Computer Science, Chung Yuan Christian University, Chung-Li 32023, Taiwan (China); Lan, Shan-Ming [Department of Electronic Engineering, College of Electrical Engineering and Computer Science, Chung Yuan Christian University, Chung-Li 32023, Taiwan (China); Yang, Tsun-Neng; Shen, Chin-Chang; Wu, Chih-Hung [Institute of Nuclear Energy Research, P.O. Box 3-11, Lungtan 32500, Taiwan (China)

    2015-09-30

    Polycrystalline CuCl films were fabricated by chemical bath deposition (CBD) on a Cu substrate at a low solution temperature of 90 °C. Continuous CuCl films were prepared using the copper (II) chloride (CuCl{sub 2}) compound as the precursor for both the Cu{sup 2+} and Cl{sup −} sources, together with repeated HCl dip treatments. An HCl dip pretreatment of the substrate favored the nucleation of CuCl crystallites. Further, interrupting the film deposition and including an HCl dip treatment of the film growth surface facilitated the deposition of a full-coverage CuCl film. A dual beam (FIB/SEM) system with energy dispersive spectrometry facilities attached revealed a homogeneous CuCl layer with a flat-top surface and an average thickness of about 1 μm. Both the excitonic and biexcitonic emission lines were well-resolved in the 6.4 K photoluminescence spectra. In particular, the free exciton emission line was observable at room temperature, indicating the good quality of the CuCl films prepared by CBD. - Highlights: • Cuprous chloride (CuCl) was prepared on Cu substrate by chemical bath deposition. • HCl dip treatments facilitated the deposition of a full-coverage CuCl film. • A homogeneous elemental distribution was recognized for the deposited CuCl layer. • Excitonic and biexcitonic photoluminescence lines of CuCl films were well-resolved. • The free exciton emission line of CuCl films was observable at room temperature.

  3. Comparison of Poly Aluminum Chloride and Chlorinated Cuprous for Chemical Oxygen Demand and Color Removal from Kashan Textile Industries Company Wastewater

    Directory of Open Access Journals (Sweden)

    Hoseindoost Gh.1 MSPH,

    2016-08-01

    Full Text Available Aims Textile wastewaters are the most important health and environmental problems in Kashan. This research was aimed to compare the poly aluminum chloride and chlorinated cuprous efficiency for removal of Chemical Oxygen Demand (COD and color from Kashan Textile Industries Company wastewater. Materials & Methods This experimental bench scale study in a batch system was conducted on 20 composed wastewater samples collected from Kashan Textile Industries Company raw wastewater. During 5 months, in the beginning of every week a day was selected randomly and in the day a composed sample was taken and studied. PAC at the doses of 10, 20, 30, 40 and 50mg.l-1 and chlorinated cuprous at the doses of 100, 200, 300, 400 and 500mg.l-1 were applied. The optimum pH also optimum concentration of PAC and chlorinated cuprous were determined using Jar test. The data was analyzed by SPSS 16 using descriptive statistics and Fisher Exact test. Findings The average concentration of COD in the raw textile wastewater was 2801.56±1398.29mg.l-1. The average COD concentration has been decreased to 1125.47±797.55mg.l-1. There was a significant difference between the effects of these two coagulants efficiency (p<0.05. The average COD removal efficiency for chlorinated cuprous and PAC was 58.52% and 72.56%, respectively. Also, the average color removal efficiency by chlorinated cuprous and PAC were 17.23 and 64.45%, respectively. Conclusion PAC is more efficient than chlorinated cuprous for both COD and color removal from KTIC wastewater.

  4. Magnetoexcitons in cuprous oxide

    Science.gov (United States)

    Schweiner, Frank; Main, Jörg; Wunner, Günter; Freitag, Marcel; Heckötter, Julian; Uihlein, Christoph; Aßmann, Marc; Fröhlich, Dietmar; Bayer, Manfred

    2017-01-01

    Two of the most striking experimental findings when investigating exciton spectra in cuprous oxide using high-resolution spectroscopy are the observability and the fine structure splitting of F excitons reported by J. Thewes et al. [Phys. Rev. Lett. 115, 027402 (2015), 10.1103/PhysRevLett.115.027402]. These findings show that it is indispensable to account for the complex valence band structure and the cubic symmetry of the solid in the theory of excitons. This is all the more important for magnetoexcitons, where the external magnetic field reduces the symmetry of the system even further. We present the theory of excitons in Cu2O in an external magnetic field and especially discuss the dependence of the spectra on the direction of the external magnetic field, which cannot be understood from a simple hydrogenlike model. Using high-resolution spectroscopy, we also present the corresponding experimental spectra for cuprous oxide in Faraday configuration. The theoretical results and experimental spectra are in excellent agreement as regards not only the energies but also the relative oscillator strengths. Furthermore, this comparison allows for the determination of the fourth Luttinger parameter κ of this semiconductor.

  5. Radiation annealing in cuprous oxide

    DEFF Research Database (Denmark)

    Vajda, P.

    1966-01-01

    Experimental results from high-intensity gamma-irradiation of cuprous oxide are used to investigate the annealing of defects with increasing radiation dose. The results are analysed on the basis of the Balarin and Hauser (1965) statistical model of radiation annealing, giving a square-root relati......-root relationship between the rate of change of resistivity and the resistivity change. The saturation defect density at room temperature is estimated on the basis of a model for defect creation in cuprous oxide....

  6. 21 CFR 184.1265 - Cuprous iodide.

    Science.gov (United States)

    2010-04-01

    ... with potassium iodide under slightly acidic conditions. (b) The ingredient must be of a purity suitable... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Cuprous iodide. 184.1265 Section 184.1265 Food and... Substances Affirmed as GRAS § 184.1265 Cuprous iodide. (a) Cuprous iodide (copper (I) iodide, CuI, CAS...

  7. Interaction of a pseudo-π C—C bond with cuprous and argentous chlorides: Cyclopropane⋯CuCl and cyclopropane⋯AgCl investigated by rotational spectroscopy and ab initio calculations

    Energy Technology Data Exchange (ETDEWEB)

    Zaleski, Daniel P.; Mullaney, John C.; Bittner, Dror M.; Walker, Nicholas R., E-mail: a.c.legon@bristol.ac.uk, E-mail: nick.walker@newcastle.ac.uk [School of Chemistry, Newcastle University, Bedson Building, Newcastle-Upon-Tyne NE1 7RU (United Kingdom); Tew, David P.; Legon, Anthony C., E-mail: a.c.legon@bristol.ac.uk, E-mail: nick.walker@newcastle.ac.uk [School of Chemistry, University of Bristol, Bristol BS8 1TS (United Kingdom)

    2015-10-28

    Strongly bound complexes (CH{sub 2}){sub 3}⋯MCl (M = Cu or Ag), formed by non-covalent interaction of cyclopropane and either cuprous chloride or argentous chloride, have been generated in the gas phase by means of the laser ablation of either copper or silver metal in the presence of supersonically expanded pulses of a gas mixture containing small amounts of cyclopropane and carbon tetrachloride in a large excess of argon. The rotational spectra of the complexes so formed were detected with a chirped-pulse, Fourier transform microwave spectrometer and analysed to give rotational constants and Cu and Cl nuclear quadrupole coupling constants for eight isotopologues of each of (CH{sub 2}){sub 3}⋯CuCl and (CH{sub 2}){sub 3}⋯AgCl. The geometry of each of these complexes was established unambiguously to have C{sub 2v} symmetry, with the three C atoms coplanar, and with the MCl molecule lying along a median of the cyclopropane C{sub 3} triangle. This median coincides with the principal inertia axis a in each of the two complexes (CH{sub 2}){sub 3}⋯MCl. The M atom interacts with the pseudo-π bond linking the pair of equivalent carbon atoms {sup F}C (F = front) nearest to it, so that M forms a non-covalent bond to one C—C edge of the cyclopropane molecule. The (CH{sub 2}){sub 3}⋯MCl complexes have similar angular geometries to those of the hydrogen- and halogen-bonded analogues (CH{sub 2}){sub 3}⋯HCl and (CH{sub 2}){sub 3}⋯ClF, respectively. Quantitative details of the geometries were determined by interpretation of the observed rotational constants and gave results in good agreement with those from ab initio calculations carried out at the CCSD(T)(F12*)/aug-cc-pVTZ-F12 level of theory. Interesting geometrical features are the lengthening of the {sup F}C—{sup F}C bond and the shrinkage of the two equivalent {sup B}C—{sup F}C (B = back) bonds relative to the C—C bond in cyclopropane itself. The expansions of the {sup F}C—{sup F}C bond are 0

  8. Determination of aluminum in aluminum electrolyte by EDTA back titration with ethanol-cuprous chloride-ammonium chloride-hydrochloric acid complex solvent separation%乙醇-氯化亚铜-氯化铵-盐酸复合溶剂分离-EDTA返滴定法测定铝电解质中单质铝

    Institute of Scientific and Technical Information of China (English)

    蒲秋梅; 任凤莲; 曹福悦

    2011-01-01

    新型低温铝电解质体系物相组成复杂,单质铝的分离测定尤为困难.本文采用高选择性复合溶剂乙醇-氯化亚铜-氯化铵-盐酸(ECAH)直接分离后测定铝电解质中单质铝,成功解决了单质铝与其它铝的化合物分离困难的问题,有效降低了铝电解质溶样时铝的氟化物的微溶效应带来的误差,为铝电解质中单质铝的物相分析提供了可靠的研究方案.采用经典ED-TA络合返滴定法测得铝电解质样品中单质铝含量,加标回收率在97%~103%之间,RSD(n=6)为1.1%和1.5%.测定结果和Al-CAS-OP-CPC四元络合光度法测定结果进行比对,结果一致.%It was particularly difficult to separate and determine aluminum in new low-temperature aluminum electrolyte system because of its complicated components. In this paper, aluminum in aluminum electrolyte was directly separated and determined using high-selectivity ethanol -cuprous chlorideammomum chloride-hydrochloric acid (ECAH) as complex solvent. This method successfully settled the problem of difficult separation of aluminum from aluminum compounds, effectively reduced the determination error introduced by slight soluble effect of fluoride of aluminum during the dissolution of aluminum electrolyte, and provided a reliable research method for the phase analysis of aluminum in aluminum electrolyte. Aluminum in aluminum electrolyte samples was determined by classic EDTA complexing back titration method. The standard addition recoveries were 97%-103 %, and the relative standard deviations (RSD, n=6) were 1. 1 % and 1. 5 %, respectively. The determination results were in good agreement with those obtained by Al-CAS-OP-CPC quaternary complex photometry.

  9. Synthesis and characterization of several molybdenum chloride cluster compounds

    Energy Technology Data Exchange (ETDEWEB)

    Beers, W.W.

    1983-06-01

    Investigation into the direct synthesis of Mo/sub 4/Cl/sub 8/(P(C/sub 2/H/sub 5/)/sub 3/)/sub 4/ from Mo/sub 2/(OAc)/sub 4/ led to a synthetic procedure that produces yields greater than 80%. The single-crystal structure disclosed a planar rectangular cluster of molybdenum atoms. Metal-metal bond distances suggest that the long edges of the rectangular cluster should be considered to be single bonds and the short metal-metal bonds to be triple bonds. This view is reinforced by an extended Hueckel calculation. Attempts to add a metal atom to Mo/sub 4/Cl/sub 8/(PR/sub 3/)/sub 4/ to form Mo/sub 5/Cl/sub 10/(PR/sub 3/)/sub 3/ led instead to a compound with the composition Mo/sub 8/Cl/sub 16/(PR/sub 3/)/sub 4/. Solution and reflectance uv-visible spectra and x-ray photoelectron spectra suggest that tetranuclear molybdenum units are present. The facile reaction between Mo/sub 8/Cl/sub 16/(PR/sub 3/)/sub 4/ and PR/sub 3/ imply that the linkage between tetrameric units is weak.

  10. Geometric isotope effects on small chloride ion water clusters with path integral molecular dynamics simulations

    Science.gov (United States)

    Wang, Qi; Suzuki, Kimichi; Nagashima, Umpei; Tachikawa, Masanori; Yan, Shiwei

    2013-11-01

    The geometric isotope effects on the structures of hydrated chloride ionic hydrogen bonded clusters are explored by carrying out path integral molecular dynamics simulations. First, an outer shell coordinate is selected to display the rearrangement of single and multi hydration shell cluster structures. Next, to show the competition of intramolecular and intermolecular nuclear quantum effects, the intramolecular OH∗ stretching and intermolecular ion-water wagging motions are studied for single and multi shell structures, respectively. The results indicate that the intermolecular nuclear quantum effects stabilize the ionic hydrogen bonds in single shell structures, while they are destabilized through the competition with intramolecular nuclear quantum effects in multi shell structures. In addition, the correlations between ion-water stretching motion and other cluster vibrational coordinates are discussed. The results indicate that the intermolecular nuclear quantum effects on the cluster structures are strongly related to the cooperation of the water-water hydrogen bond interactions.

  11. Resistance switching of electrodeposited cuprous oxide

    Science.gov (United States)

    Yazdanparast, Sanaz

    In this work, the resistance switching behavior of electrodeposited cuprous oxide (Cu2O) thin films in Au/Cu2O/top electrode (Pt, Au-Pd, Al) cells was studied. After an initial FORMING process, the fabricated cells show reversible switching between a low resistance state (16.6 O) and a high resistance state (0.4 x 106 O). Changing the resistance states in cuprous oxide films depends on the magnitude of the applied voltage which corresponds to unipolar resistance switching behavior of this material. The endurance and retention tests indicate a potential application of the fabricated cells for nonvolatile resistance switching random access memory (RRAM). The results suggest formation and rupture of one or several nanoscale copper filaments as the resistance switching mechanism in the cuprous oxide films. At high electric voltage in the as-deposited state of Au/Cu 2O/Au-Pd cell structure, the conduction behavior follows Poole-Frenkel emission. Various parameters, such as the compliance current, the cuprous oxide microstructure, the cuprous oxide thickness, top electrode area, and top electrode material, affect the resistance switching characteristics. The required FORMING voltage is higher for Au/Cu2O/Al cell compared with the Au/Cu2O/Pt which is related to the Schottky behavior of Al contact with Cu2O. Cu2O nanowires in Au-Pt/ Cu 2O/Au-Pt cell also show resistance switching behavior, indicating scalable potential of this cell for usage as RRAM. After an initial FORMING process under an electric field of 3 x 106 V/m, the Cu2O nanowire is switched to the LRS. During the FORMING process physical damages are observed in the cell, which may be caused by Joule heating and gas evolution.

  12. Geometric isotope effects on small chloride ion water clusters with path integral molecular dynamics simulations

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Qi [Department of Chemistry, Tsukuba University, 1-1-1 Tennodai, Tsukuba 305-8571 (Japan); Suzuki, Kimichi [Research Institute for Nanosystem, National Institute of Advanced Industrial Science and Technology, Chuo-2, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan); Nagashima, Umpei, E-mail: u.nagashima@aist.go.jp [Department of Chemistry, Tsukuba University, 1-1-1 Tennodai, Tsukuba 305-8571 (Japan); Research Institute for Nanosystem, National Institute of Advanced Industrial Science and Technology, Chuo-2, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan); Tachikawa, Masanori [Quantum Chemistry Division, Graduate School of Science, Yokohama-City University, Seto 22-2, Kanazawa-ku, Yokohama 236-0027 (Japan); Yan, Shiwei [College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China)

    2013-11-29

    Highlights: • PIMD simulations with PM6-DH+ potential are carried out for Cl{sup −}(H{sub 2}O){sub n} clusters. • The geometric isotope effects on the rearrangement of single and multi shell structures are presented. • The competition of intramolecular and intermolecular nuclear quantum effects on the cluster structures is shown. • The correlations between r(Cl…O) and other vibration motions are discussed. - Abstract: The geometric isotope effects on the structures of hydrated chloride ionic hydrogen bonded clusters are explored by carrying out path integral molecular dynamics simulations. First, an outer shell coordinate is selected to display the rearrangement of single and multi hydration shell cluster structures. Next, to show the competition of intramolecular and intermolecular nuclear quantum effects, the intramolecular OH{sup ∗} stretching and intermolecular ion–water wagging motions are studied for single and multi shell structures, respectively. The results indicate that the intermolecular nuclear quantum effects stabilize the ionic hydrogen bonds in single shell structures, while they are destabilized through the competition with intramolecular nuclear quantum effects in multi shell structures. In addition, the correlations between ion–water stretching motion and other cluster vibrational coordinates are discussed. The results indicate that the intermolecular nuclear quantum effects on the cluster structures are strongly related to the cooperation of the water–water hydrogen bond interactions.

  13. Electron affinities of d1 transition metal chloride clusters and onset of super halogen behavior

    Science.gov (United States)

    Behera, Swayamprabha; Joseph, Jorly; Jena, Purusottam

    2011-03-01

    Geometry, electronic structure, and electron affinity of d1 transition metal chloride clusters (MCl n , M = Sc,Y, La; n = 1--5) have been calculated using density functional theory. Chlorine atoms are chemically bound in all cases except for MCl 5 . The electron affinities of MCl n (n = 1--3) are small and increase only marginally as a function of n until the valence of the metal atom is consumed. Beyond this, they rise sharply and reach a value of 5.96, 6.03 and 5.90 eV for ScCl 4 , YCl 4 and LaCl 4 , respectively and remain high for n = 5. MCl n , (n = 4,5) clusters, therefore, behave as superhalogens. Results are compared with available experimental data

  14. Cluster of postinjection abscesses related to corticosteroid injections and use of benzalkonium chloride.

    Science.gov (United States)

    Olson, R K; Voorhees, R E; Eitzen, H E; Rolka, H; Sewell, C M

    1999-01-01

    Benzalkonium chloride (BC) is an unreliable disinfectant. A matched case-control study and environmental investigation were conducted to determine the cause of and risk factors for a cluster of postinjection abscesses at a private medical clinic where BC was used as a disinfectant. Twenty-eight case-patients who had an abscess at the injection site were matched with 126 control patients who had received an intramuscular injection at the clinic on the same day. Risk factors for abscess development in a multivariable logistic model were corticosteroid injection and being female. All case-patients had received a corticosteroid injection from a multidose vial. Cultures of abscesses from 20 of 23 case-patients grew Pseudomonas aeruginosa. Cultures of BC prepared at the clinic also grew P aeruginosa, suggesting that BC was the source of infection. Injection site cleaning with BC did not appear to be the route of infection since use of BC at the time of injection was not associated with abscess development. A more likely route of infection was injection of contaminated corticosteroid from multidose vials that could have been inoculated with pseudomonads via needle puncture after vial septa were wiped with contaminated BC. Benzalkonium chloride should not be used to clean injection vial septa or injection sites. PMID:10214100

  15. Preparation and Instability of Nanocrystalline Cuprous Nitride.

    Science.gov (United States)

    Reichert, Malinda D; White, Miles A; Thompson, Michelle J; Miller, Gordon J; Vela, Javier

    2015-07-06

    Low-dimensional cuprous nitride (Cu3N) was synthesized by nitridation (ammonolysis) of cuprous oxide (Cu2O) nanocrystals using either ammonia (NH3) or urea (H2NCONH2) as the nitrogen source. The resulting nanocrystalline Cu3N spontaneously decomposes to nanocrystalline CuO in the presence of both water and oxygen from air at room temperature. Ammonia was produced in 60% chemical yield during Cu3N decomposition, as measured using the colorimetric indophenol method. Because Cu3N decomposition requires H2O and produces substoichiometric amounts of NH3, we conclude that this reaction proceeds through a complex stoichiometry that involves the concomitant release of both N2 and NH3. This is a thermodynamically unfavorable outcome, strongly indicating that H2O (and thus NH3 production) facilitate the kinetics of the reaction by lowering the energy barrier for Cu3N decomposition. The three different Cu2O, Cu3N, and CuO nanocrystalline phases were characterized by a combination of optical absorption, powder X-ray diffraction, transmission electron microscopy, and electronic density of states obtained from electronic structure calculations on the bulk solids. The relative ease of interconversion between these interesting and inexpensive materials bears possible implications for catalytic and optoelectronic applications.

  16. Evaluation of defects in cuprous oxide through exciton luminescence imaging

    Energy Technology Data Exchange (ETDEWEB)

    Frazer, Laszlo, E-mail: jl@laszlofrazer.com [Department of Physics, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Lenferink, Erik J. [Department of Physics, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Chang, Kelvin B. [Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Poeppelmeier, Kenneth R. [Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Chemical Sciences and Engineering Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States); Stern, Nathaniel P. [Department of Physics, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Ketterson, John B. [Department of Physics, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Department of Electrical Engineering and Computer Science, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States)

    2015-03-15

    The various decay mechanisms of excitons in cuprous oxide (Cu{sub 2}O) are highly sensitive to defects which can relax selection rules. Here we report cryogenic hyperspectral imaging of exciton luminescence from cuprous oxide crystals grown via the floating zone method showing that the samples have few defects. Some locations, however, show strain splitting of the 1s orthoexciton triplet polariton luminescence. Strain is reduced by annealing. In addition, annealing causes annihilation of oxygen and copper vacancies, which leads to a negative correlation between luminescence of unlike vacancies. - Highlights: • We use luminescence to observe defects in high quality cuprous oxide crystals. • Strain is reduced by annealing. • Annealing causes annihilation of oxygen and copper vacancies.

  17. The Absorption of Benzotriazole on Copper and Cuprous Oxide

    Science.gov (United States)

    1988-07-01

    Cornell University, Ithaca INY, 14853 Copper surfaces are commonly treated with benzotriazole ( BTA ), 1. to inhibit cor- rosion. H1+ is thought to be...00 00 SIOFFICE OF NAVAL RESEARCH Contract N00014-82-K-0576 Technical Report No. 38 THE ADSORPTION OF BENZOTRIAZOLE ON COPPER AND CUPROUS OXIDE by M... Benzotriazole on Copper and Cuprous Oxide 12 7- `SONAL AUTHOR(S) M. C. Zonnevylle and R. Hoffmann 13a TYPE OF REPORT 13b TIME COVERED 14 DATE OF REPORT (Year

  18. Potentiostatic Deposition and Characterization of Cuprous Oxide Thin Films

    OpenAIRE

    2013-01-01

    Electrodeposition technique was employed to deposit cuprous oxide Cu2O thin films. In this work, Cu2O thin films have been grown on fluorine doped tin oxide (FTO) transparent conducting glass as a substrate by potentiostatic deposition of cupric acetate. The effect of deposition time on the morphologies, crystalline, and optical quality of Cu2O thin films was investigated.

  19. Sensitivity of cuprous azide towards heat and impact

    Directory of Open Access Journals (Sweden)

    Kartar Singh

    1958-07-01

    Full Text Available "Rates of thermal decomposition of azide at six different temperatures have been measured. The sigmoid shapes of the curves representing increase in pressure with time suggest that a given temperature a fixed number of nuclei are formed at the end of the induction period. The nuclei increase in size in three dimensions. The radius of any nucleus at any instant (tis directly proportional to (t-t/Sub/owhere t/Sub/o is the induction period. The activation energy involved in thermal has been found decomposition to be 26.5K calories. It is suggested that this activation energy corresponds to the energy required for thermal transition of an electron 3 d band to the Fermi level of the metallic copper nuclei. The impact sensitivity and induction period necessary for explosion at various temperatures for crystalline and precipitated samples of cuprous azide have been measured. The results indicate that cuprous azide is more sensitive towards heat and impact than lead azide. The impact sensitivity of cuprous azide is found to increase in crystal size."

  20. Hydrometallurgical process for the recycling of copper using anodic oxidation of cuprous ammine complexes and flow-through electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Oishi, T.; Yaguchi, M.; Koyama, K.; Tanaka, M. [Metals Recycling Group, Research Institute for Environmental Management Technology, National Institute of Advanced Industrial Science and Technology (AIST), 16-1 Onogawa, Tsukuba, Ibaraki 305-8569 (Japan); Lee, J.-C. [Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources (KIGAM), 30 Gajeong-dong, Yuseong-ku, Daejeon 305-350 (Korea)

    2008-01-01

    Flow-through electrolysis for copper electrowinning from cuprous ammine complex was studied in order to develop a hydrometallurgical copper recycling process using an ammoniacal chloride solution, focusing on the anodic oxidation of cuprous to cupric ammine complexes. The current efficiency of this anodic oxidation was 96% at a current density of 200 A m{sup -2} under a batch condition. In a flow-through electrolysis using a sub-liter cell and a carbon felt anode, the anodic current efficiency increased with the flow rate and was typically higher than 97%. This tendency was explained by the backward flow of the cupric ammine complex, which was formed on the anode, through the diaphragm. The anodic overpotential was lower than 0.3 V even at an apparent current density of 1500 A m{sup -2}. A similar current efficiency and overpotential were also achieved in a liter scale cell, which indicates the scale flexibility of this electrolysis. The power consumption requirements for copper electrowinning in this cell were 460 and 770 kWh t{sup -1} at the current densities of 250 and 500 A m{sup -2}, respectively, which were much lower than that of the conventional copper electrowinning despite the longer interpolar distance. (author)

  1. Green chemistry synthesis of nano-cuprous oxide.

    Science.gov (United States)

    Ceja-Romero, L R; Ortega-Arroyo, L; Ortega Rueda de León, J M; López-Andrade, X; Narayanan, J; Aguilar-Méndez, M A; Castaño, V M

    2016-04-01

    Green chemistry and a central composite design, to evaluate the effect of reducing agent, temperature and pH of the reaction, were employed to produce controlled cuprous oxide (Cu2O) nanoparticles. Response surface method of the ultraviolet-visible spectroscopy is allowed to determine the most relevant factors for the size distribution of the nanoCu2O. X-ray diffraction reflections correspond to a cubic structure, with sizes from 31.9 to 104.3 nm. High-resolution transmission electron microscopy reveals that the different shapes depend strongly on the conditions of the green synthesis.

  2. Microwave-assisted synthesis and optical properties of cuprous oxide micro/nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Dandan [Key Laboratory of Processing and Testing Technology of Glass and Functional Ceramics of Shandong Province, Qilu University of Technology, Jinan 250353 (China); Du, Yi, E-mail: duyi234@126.com [Key Laboratory of Processing and Testing Technology of Glass and Functional Ceramics of Shandong Province, Qilu University of Technology, Jinan 250353 (China); Tian, Xiuying, E-mail: xiuyingt@yahoo.com [Department of Chemistry and Materials Science, Hunan Institute of Humanities Science and Technology, Loudi 417000 (China); Li, Zhongfu; Chen, Zhongtao; Zhu, Chaofeng [Key Laboratory of Processing and Testing Technology of Glass and Functional Ceramics of Shandong Province, Qilu University of Technology, Jinan 250353 (China)

    2014-12-15

    Graphical abstract: Cuprous oxide micro/nanocrystals were fabricated by a facile and green microwave-assisted method using soluble starch as reductant and dispersant. Spheres with the diameter of about 100 and 600 nm, octahedron and truncated octahedron with the edge length of about 0.8–3 μm cuprous oxide micro/nanocrystals were successfully obtained. Microwave heating was proved to be a efficient method and was advantageous to the homogeneous nucleation. Growth mechanism of the prepared Cu{sub 2}O microcrystals were investigated carefully. Furthermore, the optical properties of the prepared cuprous oxide microcrystals were investigated by UV–vis diffuse reflectance spectroscopy, demonstrating that their band gaps of obtained samples were 1.96–2.07 eV, assigned to their different sizes and morphologies. - Abstract: Cuprous oxide micro/nanocrystals were fabricated by a facile and green microwave-assisted method using soluble starch as reductant and dispersant. It was observed that the addition amounts of NaOH had a prominent effect on the morphologies and size of cuprous oxide products, and microwave heating was proved to be a efficient method and was advantageous to the homogeneous nucleation. The as-obtained samples were characterized by X-ray diffraction (XRD), and field-emission scanning electron microscopy (FESEM). The results indicated that the samples were pure cuprous oxide. Spheres with the diameter of about 100 and 600 nm, octahedron and truncated octahedron with the edge length of about 0.8–3 μm cuprous oxide micro/nanocrystals were successfully obtained. Furthermore, the UV–vis diffuse reflectance spectroscopy was used to investigate the optical properties of the prepared cuprous oxide microcrystals, demonstrating that their band gaps of obtained samples were 1.96–2.07 eV, assigned to their different sizes and morphologies.

  3. Oxidation of cuprous stellacyanin by aminopolycarboxylatocobaltate(III) complexes.

    Science.gov (United States)

    Yoneda, G S; Mitchel, G L; Blackmer, G L; Holwerda, R A

    1978-01-01

    Rate parameters are reported for the oxidation of cuprous stellacyanin by Co(PDTA)-(k(25.0 degrees) = 17.9 M(-1)sec(-1), deltaH not equal to = 8.5 kcal/mol, deltaH not equal to = 8.5 kcal/mol, deltaS not equal to = -24 cal/mol-deg; pH 7.0, Mu 0.5 M) and Co(CyDTA)-(k(25.1 degrees) = 17.0 M(-1)sec(-1), deltaH not equal to = 8.7 kcal/mol, deltaS not equal to = -24 cal/mol-deg; pH 7.0 mu 0.5 M). The first order Co(PDTA)- and Co(CyDTA)- dependences observed over wide concentration ranges contrast with the saturation behavior reported previously for Co(EDTA)- as the oxidant. It is concluded that the- CH3 and -(CH2)4-substituents of PDTA and CyDTA, respectively, prevent the alkylated derivatives of Co(EDTA)- from hydrogen bonding with the reduced blue protein, causing precursor complex formation constants to fall far below that of 149M(-1) (25.1 degrees) observed for the EDTA complex. The similarity between deltaH not equal to and deltaS not equal to values for the oxidation of stellacyanin by Co(PDTA)- and Co(CyDTA)- indicates that the size of alkyl substituents linked to the carbon atoms of the EDTA ethylenediamine backbone has little influence on activation requirements for Cu(I) to Co(III) electron transfer. The electron transfer reactivity of aminopolycarboxylatocobalt(III) complexes with cuprous stellacyanin therefore appears to be linked to the accessibility of one or more of the ligated acetate groups to outer-sphere contact with the type 1 Cu(I) center. Saturation in kobsd vs. [oxidant] plots found for the reactions of Co(PDTA)- and Co(CyDTA)- with stellacyanin at pH 6 and at pH 7 in the presence of EDTA is attributed to the formation of "dead-end" oxidant-protein complexes.

  4. The coordination chemistry of two symmetric fluorene-based organic ligands with cuprous chloride.

    Science.gov (United States)

    Liu, Yan-Fei; Zhao, Chao-Wei; Ma, Jian-Ping; Liu, Qi-Kui; Dong, Yu-Bin

    2013-12-15

    Two novel symmetric fluorene-based ligands, namely, 2,7-bis(1H-imidazol-1-yl)-9,9-dimethyl-9H-fluorene [L1 or (I), C21H18N4] and 2,7-bis(1H-imidazol-1-yl)-9,9-dipropyl-9H-fluorene (L2), have been used to construct the coordination polymers catena-poly[[dichloridodicopper(I)(Cu-Cu)]-μ-2,7-bis(1H-imidazol-1-yl)-9,9-dimethyl-9H-fluorene], [Cu2Cl2(C21H18N4)]n, (II), and catena-poly[[tetra-μ2-chlorido-tetracopper(I)]-bis[μ-2,7-bis(1H-imidazol-1-yl)-9,9-dipropyl-9H-fluorene

  5. Microwave Synthesis of Cuprous Oxide Micro-/Nanocrystals with Different Morphologies and Photocatalytic Activities

    Institute of Scientific and Technical Information of China (English)

    Qingwei Zhu; Yihe Zhang; Jiajun Wang; Fengshan Zhou; Paul K. Chu

    2011-01-01

    Cuprous oxide micro-/nanocrystals were synthesized by using a simple liquid phase reduction process under microwave irradiation. Copper sulfate was used as the starting materials and macromolecule surfactants served as the templates.The morphologies phase and optical properties of them are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and ultraviolet-visible diffuse reflection absorptive spectra (UV-vis/DRS), respectively. The crystals had four different shapes, namely spheres, strips, octahedrons, and dandelions. The photocatalytic behavior of the cuprous oxide particles were investigated by monitoring the degradation of rhodamine B. In spite of the different morphologies, all of the cuprous oxide micro-/nanocrystals exhibited photocatalytic activities under visible light irradiation in the following order: dandelions, strips, spheres, and octahedral crystals. The photocatalytic degradation rates of rhodamine B are 56.37%, 55.68%, 51.83% and 46.16%, respectively. The morphology affects significantly the photocatalytic performance.

  6. Enhancement of convective heat transfer coefficient of ethylene glycol base cuprous oxide (Cu2O) nanofluids

    Science.gov (United States)

    Hassan, Ali; Ramzan, Naveed; Umer, Asim; Ahmad, Ayyaz; Muryam, Hina

    2017-08-01

    The enhancement in the convective heat transfer coefficient of the ethylene glycol (EG) base cuprous oxide (Cu2O) nanofluids were investigated. The nanofluids of different volume concentrations i-e 1%, 2.5% and 4.5% were prepared by the two step method. Cuprous oxide (Cu2O) nanoparticles were ultrasonically stirred for four hours in the ethylene glycol (EG). The experimental study has been performed through circular tube geometry in laminar flow regime at average Reynolds numbers 36, 71 and 116. The constant heat flux Q = 4000 (W/m2) was maintained during this work. Substantial enhancement was observed in the convective heat transfer coefficient of ethylene glycol (EG) base cuprous oxide (Cu2O) nanofluids than the base fluid. The maximum 74% enhancement was observed in convective heat transfer coefficient at 4.5 vol% concentration and Re = 116.

  7. Computational Study of the Structure and Thermodynamic Properties of Ammonium Chloride Clusters Using a Parallel J-Walking Approach

    CERN Document Server

    Matro, A; Topper, R Q; Matro, Alexander; Freeman, David L.; Topper, Robert Q.

    1996-01-01

    The thermodynamic and structural properties of (NH$_4$Cl)$_n$ clusters, n=3-10 are studied. Using the method of simulated annealing, the geometries of several isomers for each cluster size are examined. Jump-walking Monte Carlo simulations are then used to compute the constant-volume heat capacity for each cluster size over a wide temperature range. To carry out these simulations a new parallel algorithm is developed using the Parallel Virtual Machine (PVM) software package. Features of the cluster potential energy surfaces, such as energy differences among isomers and rotational barriers of the ammonium ions, are found to play important roles in determining the shape of the heat capacity curves.

  8. Towards printed perovskite solar cells with cuprous oxide hole transporting layers

    DEFF Research Database (Denmark)

    Wang, Yan; Xia, Zhonggao; Liang, Jun

    2015-01-01

    Solution-processed p-type metal oxide materials have shown great promise in improving the stability of perovskite-based solar cells and offering the feasibility for a low cost printing fabrication process. Herein, we performed a device modeling study on planar perovskite solar cells with cuprous ...

  9. Optical characterization of gold-cuprous oxide interfaces for terahertz emission applications

    NARCIS (Netherlands)

    Ramanandan, G.K.P.; Adam, A.J.L.; Ramakrishnan, G.; Petrik, P.; Hendrikx, R.; Planken, P.C.M.

    2014-01-01

    We show that the interface between gold and thermally formed cuprous oxide, which emits terahertz radiation when illuminated with ultrafast femtosecond lasers, is in fact an AuCu/Cu2O interface due to the formation of the thermal diffusion alloy AuCu. The alloy enables the formation of a Schottky-ba

  10. The fictile coordination chemistry of cuprous-thiolate sites in copper chaperones.

    Science.gov (United States)

    Pushie, M Jake; Zhang, Limei; Pickering, Ingrid J; George, Graham N

    2012-06-01

    Copper plays vital roles in the active sites of cytochrome oxidase and in several other enzymes essential for human health. Copper is also highly toxic when dysregulated; because of this an elaborate array of accessory proteins have evolved which act as intracellular carriers or chaperones for the copper ions. In most cases chaperones transport cuprous copper. This review discusses some of the chemistry of these copper sites, with a view to some of the structural factors in copper coordination which are important in the biological function of these chaperones. The coordination chemistry and accessible geometries of the cuprous oxidation state are remarkably plastic and we discuss how this may relate to biological function. This article is part of a Special Issue entitled: Biogenesis/Assembly of Respiratory Enzyme Complexes.

  11. Picosecond nonlinear optical properties of cuprous oxide with different nano-morphologies

    Indian Academy of Sciences (India)

    P Harshavardhan Reddy; H Sekhar; D Narayana Rao

    2014-02-01

    Cuprous oxide nanoclusters, microcubes and microparticles were successfully synthesized by a simple co-precipitation method. Phase purity and crystallinity of the samples were studied by using X-ray powder diffraction. Transmission electron microscopy (TEM) images show different morphologies like nanoclusters, microcubes and microparticles. For linear and nonlinear optical measurements, the as-synthesized Cu2O with different morphologies were dispersed in isopropanol solution. The absorption spectrum recorded in the visible regions shows peaks that depend on the morphology of the particles and the peak shifts towards red region as one goes from nanoclusters to microparticles. Simple open-aperture Z-scan technique is used to measure nonlinear optical properties of cuprous oxide at 532 nm, 30 ps excitation at 10 Hz repetition rate. Cuprous oxide nanoclusters show reverse saturable absorption (RSA) behaviour, the microcubes and microparticles at a similar concentration exhibit saturable absorption (SA) type of behaviour at lower peak intensities and exhibit RSA within SA at higher peak intensities. The results show that the transition from SA to RSA can be ascribed to the two-photon absorption (TPA) process.

  12. Attenuated total reflectance spectroscopy of simultaneous processes: Corrosion inhibition of cuprous oxide by benzotriazole

    Science.gov (United States)

    Bratescu, Maria Antoaneta; Allred, Daniel B.; Saito, Nagahiro; Sarikaya, Mehmet; Takai, Osamu

    2008-03-01

    Attenuated total reflectance (ATR) spectroscopy was used to perform in situ studies of the corrosion inhibition of cuprous oxide (Cu 2O) by benzotriazole (BTA) in aqueous solution at concentrations from 1 to 20 μM. Because two separate processes occur simultaneously, that of Cu 2O corrosion and corrosion inhibition by BTA adsorption, the spectral information was subjected to deconvolution by a conjugate gradient minimization algorithm. Under these conditions, a solution phase concentration of 7-10 μM BTA nearly completely inhibited the corrosion of Cu 2O in deionized water. Using a Langmuir adsorption model, this represented only 25% of the maximally covered surface area.

  13. A photoemission study of benzotriazole on clean copper and cuprous oxide

    Science.gov (United States)

    Fang, Bo-Shung; Olson, Clifford G.; Lynch, David W.

    1986-11-01

    Photoemission spectra of benzotriazole (BTA) chemisorbed on clean Cu and on cuprous oxide were compared with the spectra of condensed- and gas-phase BTA. Chemisorbed BTA bonds to both Cu and Cu 2O via lone-pair orbitais on the nitrogen ring. The lack of a chemical shift for the π- orbitais indicates that BTA does not lie flat on the surface. We propose a model for the geometry and bonding of chemisorbed BTA which accounts for its corrosion inhibition on Cu, and for the corrosion inhibition, or lack of inhibition, by molecules similar to BTA.

  14. Numerical simulation of exciton dynamics in cuprous oxide at ultra low temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Som, Sunipa

    2015-06-29

    This thesis is a theoretical investigation of the relaxation behaviour of excitons in Cuprous Oxide at ultra low temperatures when the excitons are confined within a potential trap and also in a homogeneous system. Under the action of deformation potential phonon scattering only, Bose Einstein Condensation (BEC) occurs for all temperatures in the investigated range. In the case of Auger decay, we do not find at any temperature a BEC due to the heating of the exciton gas. In the case of elastic and phonon-scattering together BEC occurs in this case of 0.1 K.

  15. Physico-chemical studies of cuprous oxide (Cu{sub 2}O) nanoparticles coated on amorphous carbon nanotubes (α-CNTs)

    Energy Technology Data Exchange (ETDEWEB)

    Johan, Mohd Rafie, E-mail: mrafiej@um.edu.my; Meriam Suhaimy, Syazwan Hanani; Yusof, Yusliza, E-mail: yus_liza@siswa.um.edu.my

    2014-01-15

    Amorphous carbon nanotubes (α-CNTs) were synthesized by a chemical reaction between ferrocene and ammonium chloride at a temperature (∼250 °C) in an air furnace. As- synthesized α-CNTs were purified with deionized water and hydrochloric acid. A purified α-CNTs were hybridized with cuprous oxide nanoparticles (Cu{sub 2}O) through a simple chemical process. Morphology of the samples was analyzed with field emission scanning electron microscope (FESEM) and transmission electron microscopy (TEM). Fourier transform infrared (FTIR) spectra showed the attachment of acidic functional groups onto the surface of α-CNTs and the formation of hybridized α-CNTs-Cu{sub 2}O. Raman spectra reveal the amorphous nature of the carbon. X-ray diffraction (XRD) pattern confirmed the amorphous phase of the carbon and the formation of Cu{sub 2}O crystalline phase. The coating of Cu{sub 2}O was confirmed by FESEM, TEM, and XRD. Optical absorption of the samples has also been investigated and the quantum confinement effect was illustrated in the absorption spectra.

  16. Constructing heterostructure on highly roughened caterpillar-like gold nanotubes with cuprous oxide grains for ultrasensitive and stable nonenzymatic glucose sensor.

    Science.gov (United States)

    Chen, Anran; Ding, Yu; Yang, Zhimao; Yang, Shengchun

    2015-12-15

    In this study, a metal-metal oxide heterostructure was designed and constructed by growing cuprous oxide (Cu2O) grains on highly surface roughened caterpillar-like Au nanotubes (CLGNs) for ultrasensitive, selective and stable nonenzymatic glucose biosensors. The Cu2O grains are tightly anchored to the surface of CLGNs by the spines, resulting in a large increase in the contact area between Cu2O grains and the CLGNs, which facilitates the electron transport between metal and metal oxide and improves the sensitivity and stability of the sensors. The electron transfer coefficient (α) and electron transfer rate constant (ks) for redox reaction of Cu2O-CLGNs/GCE are found to be 0.50114 and 3.24±0.1 s(-1), respectively. The biosensor shows a linear response to glucose over a concentration range of 0.1-5mM and a high sensitivity of 1215.7 µA mM(-1) cm(-2) with a detection limit of 1.83 μM. Furthermore, the Cu2O-CLGNs biosensor exhibited strong anti-interference capability against uric acid (UA), ascorbic acid (AA), potassium chloride (KCl) and sodium ascorbate (SA), as well as a high stability and repeatability. Our current research indicates that the Cu2O-CLGNs hybrid electrode is a promising choice for constructing nonenzyme based electrochemical biosensors.

  17. Cuprous Oxide Scale up: Gram Production via Bulk Synthesis using Classic Solvents at Low Temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Hall, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Han, T. Y. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-05-07

    Cuprous oxide is a p-type semiconducting material that has been highly researched for its interesting properties. Many small-scale syntheses have exhibited excellent control over size and morphology. As the demand for cuprous oxide grows, the synthesis method need to evolve to facilitate large-scale production. This paper supplies a facile bulk synthesis method for Cu₂O on average, 1-liter reaction volume can produce 1 gram of particles. In order to study the shape and size control mechanisms on such a scale, the reaction volume was diminished to 250 mL producing on average 0.3 grams of nanoparticles per batch. Well-shaped nanoparticles have been synthesized using an aqueous solution of CuCl₂, NaOH, SDS surfactant, and NH₂OH-HCl at mild temperatures. The time allotted between the addition of NaOH and NH₂OH-HCl was determined to be critical for Cu(OH)2 production, an important precursor to the final produce The effects of stirring rates on a large scale was also analyzed during reagent addition and post reagent addition. A morphological change from rhombic dodecahedra to spheres occurred as the stirring speed was increased. The effects of NH₂OH-HCl concentration were also studied to control the etching effects of the final product.

  18. A Facile One Step Solution Route to Synthesize Cuprous Oxide Nanofluid

    Directory of Open Access Journals (Sweden)

    Shenoy U. Sandhya

    2013-05-01

    Full Text Available A cuprous oxide nanofluid stabilized by sodium lauryl sulfate, synthesized by using the one step method, has been reported. Nanofluids were synthesized by using a well‐ controlled surfactant‐assisted solution phase synthesis. The method involved reduction of copper acetate by glucose in a mixture of water and ethylene glycol serving as the base fluid. The synthesized fluid was characterized by X‐ray and electron diffraction techniques, in addition, transmission and field emission microscopic techniques and Fourier transform infra red spectroscopic analysis was undertaken. The rheological property, as well as the thermal conductivity of the fluid, were measured. The variation of reaction parameters considerably affected the size of the particles as well as the reaction rate. The uniform dispersion of the particles in the base fluid led to a stability period of three months under stationary state, augmenting the thermal conductivity of the nanofluid. The method is found to be simple, reliable and fast for the synthesis of Newtonian nanofluids containing cuprous oxide nanoparticles.

  19. Intrinsic Defect Engineering of Cuprous Oxide to Enhance Electrical Transport Properties for Photovoltaic Applications

    Energy Technology Data Exchange (ETDEWEB)

    Lloyd, Michael A.; Siah, Sin-Cheng; Brandt, Riley E.; Serdy, James; Johnston, Steve W.; Lee, Yun Seog; Buonassisi, Tonio

    2014-06-08

    Intrinsic point-defect species in cuprous oxide films are manipulated based on their thermodynamic properties via the implementation of a controlled annealing process. A wide range of electrical properties is demonstrated, with a window suitable for high-quality solar cell devices. A variation of carrier concentration over two orders of magnitude is demonstrated. Minority carrier lifetime is investigated by means of microwave photoconductance decay measurements, demonstrating a strong correlation with carrier concentration. Spectrally resolved photoluminescence yields are analyzed to provide insight into lifetime limiting mechanisms as a function of Cu2O processing parameters. Hall measurements of carrier mobility and concentration are taken at room temperature to provide insight into the effect of these processing conditions on net ionized defect concentration.

  20. Investigations of the interaction between cuprous oxide nanoparticles and Staphylococcus aureus

    Institute of Scientific and Technical Information of China (English)

    SHEN ChengLing; LI YuanFang; QI WenJing; HUANG ChengZhi

    2009-01-01

    Cuprous oxide nanoparticles of 30-50 nm in size were prepared in the presence of cetyltrimethylammonium bromide (CTAB).By taking Staphylococcus aureus (S.a),which always causes a variety of suppurative infections and toxinoses in humans,as a model bioparticle,the negative bioeffect of nano-Cu2O on S.a cells was evaluated,and minimal inhibitory concentration (MIC) was determined by imitating the MIC of antibiotics.Cellularity and bactericidal effect were measured by flow cytometry (FCM),dark field light scattering imaging and SEM photography.The results showed that nano-Cu2O particles may,by absorbing on the cell surface,impair the cell wall,damage the cell membrane,and finally increase permeability of the cell membrane,thus leading to a decrease in the viability of bacteria in the nano-Cu2O solution.

  1. Theory and experiment on the cuprous-cupric electron transfer rate at a copper electrode.

    Energy Technology Data Exchange (ETDEWEB)

    Halley, J. W.; Smith, B. B.; Walbran, S.; Curtiss, L. A.; Rigney, R. O.; Sutjianto, A.; Hung, N. C.; Yonco, R. M.; Nagy, Z.; Univ. of Minnesota; NREL

    1999-04-01

    We describe results of experiment and theory of the cuprous-cupric electron transfer rate in an aqueous solution at a copper electrode. The methods are similar to those we reported earlier for the ferrous-ferric rate. The comparison strongly suggests that, in marked distinction to the ferrous-ferric case, the electron transfer reaction is adiabatic. The model shows that the activation barrier is dominated by the energy required for the ion to approach the electrode, rather than by the energy required for rearrangement of the solvation shell, also in sharp distinction to the case of the ferric-ferrous electron transfer at a gold electrode. Calculated activation barriers based on this image agree with the experimental results reported here.

  2. Theory and experiment on the cuprous{endash}cupric electron transfer rate at a copper electrode

    Energy Technology Data Exchange (ETDEWEB)

    Halley, J.W. [School of Physics and Astronomy, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Smith, B.B. [National Renewable Energy Laboratory, Golden, Colorado (United States); Walbran, S. [School of Physics and Astronomy, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Curtiss, L.A.; Rigney, R.O.; Sutjianto, A.; Hung, N.C.; Yonco, R.M.; Nagy, Z. [Argonne National Laboratory, Divisions of Materials Science, Chemistry and Chemical Technology, Argonne, Illinois 60439-4837 (United States)

    1999-04-01

    We describe results of experiment and theory of the cuprous{endash}cupric electron transfer rate in an aqueous solution at a copper electrode. The methods are similar to those we reported earlier for the ferrous{endash}ferric rate. The comparison strongly suggests that, in marked distinction to the ferrous{endash}ferric case, the electron transfer reaction is adiabatic. The model shows that the activation barrier is dominated by the energy required for the ion to approach the electrode, rather than by the energy required for rearrangement of the solvation shell, also in sharp distinction to the case of the ferric{endash}ferrous electron transfer at a gold electrode. Calculated activation barriers based on this image agree with the experimental results reported here. {copyright} {ital 1999 American Institute of Physics.}

  3. Investigations of the interaction between cuprous oxide nanoparticles and Staphylococcus aureus

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Cuprous oxide nanoparticles of 30-50 nm in size were prepared in the presence of cetyltrimethylam-monium bromide (CTAB). By taking Staphylococcus aureus (S.a), which always causes a variety of suppurative infections and toxinoses in humans, as a model bioparticle, the negative bioeffect of nano-Cu2O on S.a cells was evaluated, and minimal inhibitory concentration (MIC) was determined by imitating the MIC of antibiotics. Cellularity and bactericidal effect were measured by flow cytometry (FCM), dark field light scattering imaging and SEM photography. The results showed that nano-Cu2O particles may, by absorbing on the cell surface, impair the cell wall, damage the cell membrane, and finally increase permeability of the cell membrane, thus leading to a decrease in the viability of bacteria in the nano-Cu2O solution.

  4. Epitaxially aligned cuprous oxide nanowires for all-oxide, single-wire solar cells.

    Science.gov (United States)

    Brittman, Sarah; Yoo, Youngdong; Dasgupta, Neil P; Kim, Si-in; Kim, Bongsoo; Yang, Peidong

    2014-08-13

    As a p-type semiconducting oxide that can absorb visible light, cuprous oxide (Cu2O) is an attractive material for solar energy conversion. This work introduces a high-temperature, vapor-phase synthesis that produces faceted Cu2O nanowires that grow epitaxially along the surface of a lattice-matched, single-crystal MgO substrate. Individual wires were then fabricated into single-wire, all-oxide diodes and solar cells using low-temperature atomic layer deposition (ALD) of TiO2 and ZnO films to form the heterojunction. The performance of devices made from pristine Cu2O wires and chlorine-exposed Cu2O wires was investigated under one-sun and laser illumination. These faceted wires allow the fabrication of well-controlled heterojunctions that can be used to investigate the interfacial properties of all-oxide solar cells.

  5. Cuprous Sulfide/Reduced Graphene Oxide Hybrid Nanomaterials: Solvothermal Synthesis and Enhanced Electrochemical Performance

    Science.gov (United States)

    He, Zhanjun; Zhu, Yabo; Xing, Zheng; Wang, Zhengyuan

    2016-01-01

    The cuprous sulfide nanoparticles (CuS NPs)-decorated reduced graphene oxide (rGO) nanocomposites have been successfully prepared via a facile and efficient solvothermal synthesis method. Scanning electron microscopy and transmission electron microscopy images demonstrated that CuS micronspheres composed of nanosheets and distributed on the rGO layer in well-monodispersed form. Fourier-transform infrared spectroscopy analyses and x-ray photoelectron spectroscopy showed that graphene oxide (GO) had been reduced to rGO. The electrochemical performances of CuS/rGO nanocomposites were investigated by cyclic voltammetry and charge/discharge techniques, which showed that the specific capacitance of CuS/rGO nanocomposites was enhanced because of the introduction of rGO.

  6. Path-integral molecular dynamics simulations of hydrated hydrogen chloride cluster HCl(H{sub 2}O){sub 4} on a semiempirical potential energy surface

    Energy Technology Data Exchange (ETDEWEB)

    Takayanagi, Toshiyuki, E-mail: tako@mail.saitama-u.ac.jp [Department of Chemistry, Saitama University, 255 Shimo-Okubo, Sakura-ku, Saitama City, Saitama 338-8570 (Japan); Takahashi, Kenta; Kakizaki, Akira [Department of Chemistry, Saitama University, 255 Shimo-Okubo, Sakura-ku, Saitama City, Saitama 338-8570 (Japan); Shiga, Motoyuki [Center for Computational Science and E-systems, Japan Atomic Energy Agency, Higashi-Ueno 6-9-3, Taito-ku, Tokyo 110-0015 (Japan); Tachikawa, Masanori [Quantum Chemistry Division, International Graduate School of Arts and Sciences, Yokohama-City University, Seto 22-2, Kanazawa-ku, Yokohama 236-0027 (Japan)

    2009-04-22

    Path-integral molecular dynamics simulations for the HCl(H{sub 2}O){sub 4} cluster have been performed on the ground-state potential energy surface directly obtained on-the-fly from semiempirical PM3-MAIS molecular orbital calculations. It is found that the HCl(H{sub 2}O){sub 4} cluster has structural rearrangement above the temperature of 300 K showing a liquid-like behavior. Quantum mechanical fluctuation of hydrogen nuclei plays a significant role in structural arrangement processes in this cluster.

  7. Path-integral molecular dynamics simulations of hydrated hydrogen chloride cluster HCl(H 2O) 4 on a semiempirical potential energy surface

    Science.gov (United States)

    Takayanagi, Toshiyuki; Takahashi, Kenta; Kakizaki, Akira; Shiga, Motoyuki; Tachikawa, Masanori

    2009-04-01

    Path-integral molecular dynamics simulations for the HCl(H 2O) 4 cluster have been performed on the ground-state potential energy surface directly obtained on-the-fly from semiempirical PM3-MAIS molecular orbital calculations. It is found that the HCl(H 2O) 4 cluster has structural rearrangement above the temperature of 300 K showing a liquid-like behavior. Quantum mechanical fluctuation of hydrogen nuclei plays a significant role in structural arrangement processes in this cluster.

  8. Chloride transference during electrochemical chloride extraction process

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Chemical titration method and lab-made chloride probes were jointly adopted to investigate the effects of water-to-cement (W/C) ratio and the impressed current density on chloride transport for cement-based materials during electrochemical chloride extraction (ECE) process.The dissolution of bound chlorides and the effect of current density on dissolution were analyzed.The variations of chloride concentration at different depths and the chloride transference process were monitored.Test results show that W/C ratios adopted have slight influence on chloride extraction,while chloride extraction efficiency is mainly determined by the impressed current density.During ECE process a portion of bound chloride ions dissolved and the amount of bound chlorides released is directly proportional to current density.

  9. Enormous excitonic effects in bulk, mono- and bi- layers of cuprous halides using many-body perturbation technique

    Science.gov (United States)

    Azhikodan, Dilna; Nautiyal, Tashi

    2017-10-01

    Cuprous halides (CuX with X = Cl, Br, I), intensely studied about four decades ago by experimentalists for excitons, are again drawing attention of researchers recently. Potential of cuprous halide systems for device applications has not yet been fully explored. We go beyond the one-particle picture to capture the two-particle physics (electron-hole interaction to form excitons). We have deployed the full tool kit of many-body perturbation technique, GW approximation + Bethe Salpeter equation, to unfurl the rich excitonic physics of the bulk as well as layers of CuX. The negative spin-orbit contribution at the valence band top in CuCl, compared to CuBr and CuI, is in good agreement with experiments. We note that CuX have exceptionally strong excitons, defying the linear fit (between the excitonic binding energy and band gap) encompassing many semiconductors. The mono- and bi- layers of cuprous halides are predicted to be rich in excitons, with exceptionally large binding energies and the resonance energies in UV/visible region. Hence this work projects CuX layers as good candidates for optoelectronic applications. With advancement of technology, we look forward to experimental realization of CuX layers and harnessing of their rich excitonic potential.

  10. Tribenzylammonium chloride

    Directory of Open Access Journals (Sweden)

    Waly Diallo

    2014-05-01

    Full Text Available Single crystals of the title salt, C21H21NH+·Cl−, were isolated as a side product from the reaction involving [(C6H5CH23NH]2[HPO4] and Sn(CH33Cl in ethanol. Both the cation and the anion are situated on a threefold rotation axis. The central N atom in the cation has a slightly distorted tetrahedral environment, with angles ranging from 107.7 to 111.16 (10°. In the crystal, the tribenzylammonium cations and chloride anions are linked through N—H...Cl and C—H...Cl hydrogen bonds, leading to the formation of infinite chains along [001]. The crystal studied was a merohedral twin.

  11. Path integral molecular dynamic study of nuclear quantum effect on small chloride water clusters of Cl-(H2O)1-4

    Science.gov (United States)

    Wang, Qi; Suzuki, Kimichi; Nagashima, Umpei; Tachikawa, Masanori; Yan, Shiwei

    2013-06-01

    The nuclear quantum effect, which plays important roles on ionic hydrogen bonded structures of Cl-(H2O)n (n = 1-4) clusters, was explored by carrying out path integral molecular dynamic simulations. An outer shell coordinate rl(Cl⋯O) is selected to display the rearrangement of single and multi hydration shell cluster structures. By incorporating the nuclear quantum effect, it is shown that the probability for single shell structures is decreased while the probability for multi shell structures is increased. On the other hand, the correlations between changing of bonded H∗ atom to Cl- (defined as δ) and other cluster vibration coordinates are studied. We have found that δ strongly correlates with proton transfer motion while it has little correlation with ion-water stretching motion. Contrary to θ(H-O-H∗) coordinate, the correlations between δ and other coordinates are decreased by inclusion of nuclear quantum effect. The results indicate that the water-water hydrogen bond interactions are encouraged by quantum simulations.

  12. Improvement in structural and electrical properties of cuprous oxide-coated multiwalled carbon nanotubes

    Indian Academy of Sciences (India)

    Shivani Dhall; Neena Jaggi

    2014-10-01

    In the present work, cuprous oxide (Cu2O) nanoparticles are coated on multi-walled carbon nanotubes (MWCNTs) using Fehling’s reaction. The coating of Cu2O nanoparticles on the nanotubes was confirmed by SEM and X-ray diffraction (XRD) spectra. The calculated D/G ratio of Cu2O (using 3% CuSO4 by wt)-coated MWCNTs by Raman spectra is found to decrease to 0.94 as compared to 1.14 for pristine MWCNTs. It shows that the presence of Cu2O nanoparticles on nanotubes decreases the inherent defects present in the form of some pentagons/heptagons in the honeycomb hexagonal carbon atoms in the structure of graphene sheets of MWCNTs and increases the crystalline nature of MWCNTs, which is also confirmed by the XRD peaks. Whereas the value of D/G ratio increases to 1.39 for sample 2 (using 5% CuSO4 by wt), which represents the structural deformation. Moreover, the electrical conductivity of MWCNTs was increased by 3 times after coating the nanotubes with Cu2O (using 3% CuSO4 by wt).

  13. Structural, Optical and Electrical Properties of Nanocrystalline Cuprous Oxide Thin Film Deposited By Chemical Method

    Directory of Open Access Journals (Sweden)

    Prakash Bansilal Ahirrao

    2010-06-01

    Full Text Available Cuprous oxide (Cu2O is an interesting p-type semiconductor material used in solar cell applications.  The Modified Chemical Bath Deposition (M-CBD method is suitable for growing thin multilayer structure due to low deposition temperature. This method does not require any sophisticated instrument and substrate need not to be conductive. The nanocrystalline Cu2O thin films were deposited on glass substrates by M-CBD method. The deposited films were characterized by different characterization techniques to study structural, surface morphological, optical and electrical properties. The structural studies show that, the formation of Cu2O thin films with an average crystallite size of 14 nm. Optical studies show a direct band gap 2.48 eV. The room temperature electrical resistivity is of the order of 1.3 kW-cm and activation energy 0.33 eV. The films exhibit p-type electrical conductivity as seen by thermo-emf measurements.

  14. Cuprous oxide photovoltaic cells. Final report, September 1, 1978-November 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Trivich, D.

    1979-01-01

    The research described represents the beginning of a second phase of research on cuprous oxide photovoltaic cells. The first phase was concerned with the development of procedures of making Schottky barriers on isolated films of Cu/sub 2/O, including single crystals. It was found that properties of these Schottky barrier cells, in particular the barrier heights, were limited by chemical changes at the junction especially with metals of low work function which tend to be more active chemically, e.g., Al. The motivation of the present phase of the research was to construct junctions that would avoid this chemical degradation while maintaining electrical contact between the Cu/sub 2/O and a low work function material in order to attain larger barrier heights. Essentially the approach involved placing the Cu/sub 2/O in contact with a stable oxide. When this oxide is used as a thin layer between the Cu/sub 2/O and a top metal contact this gives an MIS structure. As another approach the other oxide can be an n-type semiconductor in thicker layers to form a heterojunction. Results are reported. (WHK)

  15. Parameters controlling microstructures and resistance switching of electrodeposited cuprous oxide thin films

    Science.gov (United States)

    Yazdanparast, Sanaz

    2016-12-01

    Cuprous oxide (Cu2O) thin films were electrodeposited cathodically from a highly alkaline bath using tartrate as complexing agent. Different microstructures for Cu2O thin films were achieved by varying the applied potential from -0.285 to -0.395 V versus a reference electrode of Ag/AgCl at 50 °C in potentiostatic mode, and separately by changing the bath temperature from 25 to 50 °C in galvanostatic mode. Characterization experiments showed that both grain size and orientation of Cu2O can be controlled by changing the applied potential. Applying a high negative potential of -0.395 V resulted in smaller grain size of Cu2O thin films with a preferred orientation in [111] direction. An increase in the bath temperature in galvanostatic electrodeposition increased the grain size of Cu2O thin films. All the films in Au/Cu2O/Au-Pd cell showed unipolar resistance switching behavior after an initial FORMING process. Increasing the grain size of Cu2O thin films and decreasing the top electrode area increased the FORMING voltage and decreased the current level of high resistance state (HRS). The current in low resistance state (LRS) was independent of the top electrode area and the grain size of deposited films, suggesting a filamentary conduction mechanism in unipolar resistance switching of Cu2O.

  16. Cuprous oxide nanoparticle-inhibited melanoma progress by targeting melanoma stem cells.

    Science.gov (United States)

    Yu, Bin; Wang, Ye; Yu, Xinlu; Zhang, Hongxia; Zhu, Ji; Wang, Chen; Chen, Fei; Liu, Changcheng; Wang, Jingqiang; Zhu, Haiying

    2017-01-01

    Recent studies have shown that metal and metal oxide have a potential function in antitumor therapy. Our previous studies demonstrated that cuprous oxide nanoparticles (CONPs) not only selectively induce apoptosis of tumor cells in vitro but also inhibit the growth and metastasis of melanoma by targeting mitochondria with little hepatic and renal toxicities in mice. As a further study, our current research revealed that CONPs induced apoptosis of human melanoma stem cells (CD271(+/high) cells) in A375 and WM266-4 melanoma cell lines and could significantly suppress the expression of MITF, SOX10 and CD271 involved in the stemness maintenance and tumorigenesis of melanoma stem cells. CD271(+/high) cells could accumulate more CONPs than CD271(-/low) through clathrin-mediated endocytosis. In addition, lower dosage of CONPs exhibited good anti-melanoma effect by decreasing the cell viability, stemness and tumorigenesis of A375 and WM266-4 cells through reducing the expression of SOX10, MITF, CD271 and genes in MAPK pathway involved in tumor progression. Finally, CONPs obviously suppressed the growth of human melanoma in tumor-bearing nonobese diabetic-severe combined immunodeficiency (NOD-SCID) mice, accompanied with tumors structural necrosis and fibrosis remarkably and decreased expression of CD271, SOX10 and MITF. These results above proved the effectiveness of CONPs in inhibiting melanoma progress through multiple pathways, especially through targeting melanoma stem cells.

  17. Facile fabrication of electrolyte-gated single-crystalline cuprous oxide nanowire field-effect transistors

    Science.gov (United States)

    Stoesser, Anna; von Seggern, Falk; Purohit, Suneeti; Nasr, Babak; Kruk, Robert; Dehm, Simone; Wang, Di; Hahn, Horst; Dasgupta, Subho

    2016-10-01

    Oxide semiconductors are considered to be one of the forefront candidates for the new generation, high-performance electronics. However, one of the major limitations for oxide electronics is the scarcity of an equally good hole-conducting semiconductor, which can provide identical performance for the p-type metal oxide semiconductor field-effect transistors as compared to their electron conducting counterparts. In this quest, here we present a bulk synthesis method for single crystalline cuprous oxide (Cu2O) nanowires, their chemical and morphological characterization and suitability as active channel material in electrolyte-gated, low-power, field-effect transistors (FETs) for portable and flexible logic circuits. The bulk synthesis method used in the present study includes two steps: namely hydrothermal synthesis of the nanowires and the removal of the surface organic contaminants. The surface treated nanowires are then dispersed on a receiver substrate where the passive electrodes are structured, followed by printing of a composite solid polymer electrolyte (CSPE), chosen as the gate insulator. The characteristic electrical properties of individual nanowire FETs are found to be quite interesting including accumulation-mode operation and field-effect mobility of 0.15 cm2 V-1 s-1.

  18. Towards printed perovskite solar cells with cuprous oxide hole transporting layers: a theoretical design

    Science.gov (United States)

    Wang, Yan; Xia, Zhonggao; Liang, Jun; Wang, Xinwei; Liu, Yiming; Liu, Chuan; Zhang, Shengdong; Zhou, Hang

    2015-05-01

    Solution-processed p-type metal oxide materials have shown great promise in improving the stability of perovskite-based solar cells and offering the feasibility for a low cost printing fabrication process. Herein, we performed a device modeling study on planar perovskite solar cells with cuprous oxide (Cu2O) hole transporting layers (HTLs) by using a solar cell simulation program, wxAMPS. The performance of a Cu2O/perovskite solar cell was correlated to the material properties of the Cu2O HTL, such as thickness, carrier mobility, mid-gap defect, and doping concentrations. The effect of interfacial defect densities on the solar cell performance was also investigated. Our simulation indicates that, with an optimized Cu2O HTL, high performance perovskite solar cells with efficiencies above 13% could be achieved, which shows the potential of using Cu2O as an alternative HTL over other inorganic materials, such as NiOx and MoOx. This study provides theoretical guidance for developing perovskite solar cells with inorganic hole transporting materials via a printing process.

  19. Cluster-cluster clustering

    Science.gov (United States)

    Barnes, J.; Dekel, A.; Efstathiou, G.; Frenk, C. S.

    1985-01-01

    The cluster correlation function xi sub c(r) is compared with the particle correlation function, xi(r) in cosmological N-body simulations with a wide range of initial conditions. The experiments include scale-free initial conditions, pancake models with a coherence length in the initial density field, and hybrid models. Three N-body techniques and two cluster-finding algorithms are used. In scale-free models with white noise initial conditions, xi sub c and xi are essentially identical. In scale-free models with more power on large scales, it is found that the amplitude of xi sub c increases with cluster richness; in this case the clusters give a biased estimate of the particle correlations. In the pancake and hybrid models (with n = 0 or 1), xi sub c is steeper than xi, but the cluster correlation length exceeds that of the points by less than a factor of 2, independent of cluster richness. Thus the high amplitude of xi sub c found in studies of rich clusters of galaxies is inconsistent with white noise and pancake models and may indicate a primordial fluctuation spectrum with substantial power on large scales.

  20. Cluster-cluster clustering

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, J.; Dekel, A.; Efstathiou, G.; Frenk, C.S.

    1985-08-01

    The cluster correlation function xi sub c(r) is compared with the particle correlation function, xi(r) in cosmological N-body simulations with a wide range of initial conditions. The experiments include scale-free initial conditions, pancake models with a coherence length in the initial density field, and hybrid models. Three N-body techniques and two cluster-finding algorithms are used. In scale-free models with white noise initial conditions, xi sub c and xi are essentially identical. In scale-free models with more power on large scales, it is found that the amplitude of xi sub c increases with cluster richness; in this case the clusters give a biased estimate of the particle correlations. In the pancake and hybrid models (with n = 0 or 1), xi sub c is steeper than xi, but the cluster correlation length exceeds that of the points by less than a factor of 2, independent of cluster richness. Thus the high amplitude of xi sub c found in studies of rich clusters of galaxies is inconsistent with white noise and pancake models and may indicate a primordial fluctuation spectrum with substantial power on large scales. 30 references.

  1. Carbon-layer-protected cuprous oxide nanowire arrays for efficient water reduction

    KAUST Repository

    Zhang, Zhonghai

    2013-02-26

    In this work, we propose a solution-based carbon precursor coating and subsequent carbonization strategy to form a thin protective carbon layer on unstable semiconductor nanostructures as a solution to the commonly occurring photocorrosion problem of many semiconductors. A proof-of-concept is provided by using glucose as the carbon precursor to form a protective carbon coating onto cuprous oxide (Cu2O) nanowire arrays which were synthesized from copper mesh. The carbon-layer-protected Cu2O nanowire arrays exhibited remarkably improved photostability as well as considerably enhanced photocurrent density. The Cu2O nanowire arrays coated with a carbon layer of 20 nm thickness were found to give an optimal water splitting performance, producing a photocurrent density of -3.95 mA cm-2 and an optimal photocathode efficiency of 0.56% under illumination of AM 1.5G (100 mW cm-2). This is the highest value ever reported for a Cu 2O-based electrode coated with a metal/co-catalyst-free protective layer. The photostability, measured as the percentage of the photocurrent density at the end of 20 min measurement period relative to that at the beginning of the measurement, improved from 12.6% on the bare, nonprotected Cu2O nanowire arrays to 80.7% on the continuous carbon coating protected ones, more than a 6-fold increase. We believe that the facile strategy presented in this work is a general approach that can address the stability issue of many nonstable photoelectrodes and thus has the potential to make a meaningful contribution in the general field of energy conversion. © 2013 American Chemical Society.

  2. Cytotoxicity of cuprous oxide nanoparticles to fish blood cells: hemolysis and internalization

    Energy Technology Data Exchange (ETDEWEB)

    Chen Liqiang, E-mail: chenlq@ynu.edu.cn; Kang Bin [Yunnan University, Asian International Rivers Center, Yunnan Key Laboratory of International Rivers and Trans-boundary Eco-security (China); Ling Jian [Yunnan University, College of Chemistry and Chemical Engineering (China)

    2013-03-15

    Cuprous oxide nanoparticles (Cu{sub 2}O NPs) possess unique physical and chemical properties which are employed in a broad variety of applications. However, little is known about the adverse effects of Cu{sub 2}O NPs on organisms. In the current study, in vitro cytotoxicity of Cu{sub 2}O NPs (ca. 60 nm in diameter) to the blood cells of freshwater fish Carassius auratus was evaluated. A concentration-dependent hemolytic activity of Cu{sub 2}O NPs to red blood cells (RBCs) and the phagocytosis of Cu{sub 2}O NPs by leukocytes were revealed. The results showed that dosages of Cu{sub 2}O NPs greater than 40 {mu}g/mL were toxic to blood cells, and could cause serious membrane damage to RBCs. The EC{sub 50} value of Cu{sub 2}O NPs as obtained from RBCs and whole blood exposure was 26 and 63 {mu}g/mL, respectively. The generation of reactive oxygen species and the direct interaction between Cu{sub 2}O NPs and the cell membrane were suggested as the possible mechanism for cytotoxicity, and the intrinsic hemolytic active of Cu{sub 2}O NPs was the main contributor to the toxicity rather than solubilized copper ions. The adsorption of plasma proteins on the surfaces of Cu{sub 2}O NPs led to their aggregation in whole blood, and aggregate formation can significantly alleviate the hemolytic effect and subsequently mediate the phagocytosis of Cu{sub 2}O NPs by leukocytes.

  3. Novel doxorubicin loaded PEGylated cuprous telluride nanocrystals for combined photothermal-chemo cancer treatment.

    Science.gov (United States)

    Wang, Xianwen; Ma, Yan; Chen, Huajian; Wu, Xiaoyi; Qian, Haisheng; Yang, Xianzhu; Zha, Zhengbao

    2017-02-06

    Recently, combined photothermal-chemo therapy has attracted great attention due to its enhanced anti-tumor efficiency via synergistic effects. Herein, PEGylated cuprous telluride nanocrystals (PEGylated Cu2Te NCs) were developed as novel drug nanocarriers for combined photothermal-chemo treatment of cancer cells. PEGylated Cu2Te NCs were fabricated through a simple two-step process, comprised of hot injection and thin-film hydration. The as-prepared PEGylated Cu2Te NCs (average diameter of 5.21±1.05nm) showed a noticeable photothermal conversion efficiency of 33.1% and good capacity to load hydrophobic anti-cancer drug. Due to the protonated amine group at low pH, the doxorubicin (DOX)-loaded PEGylated Cu2Te NCs (PEGylated Cu2Te-DOX NCs) exhibited an acidic pH promoted drug release profile. Moreover, a three-parameter model, which considers the effects of drug-carrier interactions on the initial burst release and the sustained release of drug from micro- and nano-sized carriers, was used to gain insight into how pH and laser irradiation affect drug release from PEGylated Cu2Te-DOX NCs. Based on the results from in vitro cell study, PEGylated Cu2Te-DOX NCs revealed remarkably photothermal-chemo synergistic effect to HeLa cells, attributed to both the PEGylated Cu2Te NCs mediated photothermal ablation and enhanced cellular uptake of the drug. Thus, our results encourage the usage of Cu2Te-DOX drug nanocarriers for enhanced treatment of cancer cells by combined photothermal-chemo therapy.

  4. Plasmon-induced selective carbon dioxide conversion on earth-abundant aluminum-cuprous oxide antenna-reactor nanoparticles.

    Science.gov (United States)

    Robatjazi, Hossein; Zhao, Hangqi; Swearer, Dayne F; Hogan, Nathaniel J; Zhou, Linan; Alabastri, Alessandro; McClain, Michael J; Nordlander, Peter; Halas, Naomi J

    2017-06-21

    The rational combination of plasmonic nanoantennas with active transition metal-based catalysts, known as 'antenna-reactor' nanostructures, holds promise to expand the scope of chemical reactions possible with plasmonic photocatalysis. Here, we report earth-abundant embedded aluminum in cuprous oxide antenna-reactor heterostructures that operate more effectively and selectively for the reverse water-gas shift reaction under milder illumination than in conventional thermal conditions. Through rigorous comparison of the spatial temperature profile, optical absorption, and integrated electric field enhancement of the catalyst, we have been able to distinguish between competing photothermal and hot-carrier driven mechanistic pathways. The antenna-reactor geometry efficiently harnesses the plasmon resonance of aluminum to supply energetic hot-carriers and increases optical absorption in cuprous oxide for selective carbon dioxide conversion to carbon monoxide with visible light. The transition from noble metals to aluminum based antenna-reactor heterostructures in plasmonic photocatalysis provides a sustainable route to high-value chemicals and reaffirms the practical potential of plasmon-mediated chemical transformations.Plasmon-enhanced photocatalysis holds promise for the control of chemical reactions. Here the authors report an Al@Cu2O heterostructure based on earth abundant materials to transform CO2 into CO at significantly milder conditions.

  5. Reduced graphene oxide–cuprous oxide composite via facial deposition for photocatalytic dye-degradation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, MingYan, E-mail: mingyanlyg@hotmail.com [Department of Chemical Engineering, Huaihai Institute of Technology, Lianyungang 222005 (China); Intelligent Polymer Research Institute, ARC Centre of Excellence for Electromaterials Science, Australian Institute of Innovative Materials, University of Wollongong, Northfields Avenue, Wollongong, NSW 2522 (Australia); Huang, JunRao; Tong, ZhiWei [Department of Chemical Engineering, Huaihai Institute of Technology, Lianyungang 222005 (China); Li, WeiHua [School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Northfields Avenue, Wollongong, NSW 2522 (Australia); Chen, Jun, E-mail: junc@uow.edu.au [Intelligent Polymer Research Institute, ARC Centre of Excellence for Electromaterials Science, Australian Institute of Innovative Materials, University of Wollongong, Northfields Avenue, Wollongong, NSW 2522 (Australia)

    2013-08-15

    Highlights: •Cubic Cu{sub 2}O were effectively loaded on n-propylamine (PA) intercalated graphene oxide. •The addition of PA on the carbon sheets supports the stable structure of the composites. •Cu{sub 2}O/PA/rGO showed superior adsorption capacity and photocatalytic activity. -- Abstract: Cubic Cu{sub 2}O nanoparticles have been successfully synthesized on n-propylamine (PA) intercalated graphene oxide (GO) with uniform distribution followed with a subsequent hydrazine hydrate reduction process to generate Cu{sub 2}O/PA/rGO composite. For comparison, Cu{sub 2}O conjugated reduced graphene oxide (Cu{sub 2}O/rGO) composite was also synthesized using the same method. The as-prepared Cu{sub 2}O/PA/rGO and Cu{sub 2}O/rGO nanocomposites are characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) spectroscopy, infrared spectroscopy (IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) surface area analysis, and Electrochemical impedance spectra (EIS) measurements. UV/vis diffuse reflectance spectroscopy was employed to estimate band gap energies of cuprous oxide composites. The results show that the intercalation of PA into the layered GO increases the surface area of the composites and provides an efficient strategy to load Cu{sub 2}O due to the large and uniform distribution of active sites for anchoring copper ions. The surface area of the Cu{sub 2}O/PA/rGO (123 m{sup 2}/g) nanocomposite was found to be almost 2.5 times higher than that of Cu{sub 2}O/rGO (55.7 m{sup 2}/g). The as-prepared Cu{sub 2}O/PA/rGO show significant improvement on both adsorption capacity and photocatalytic activity towards organic pigment pollution compared with Cu{sub 2}O/rGO under identical performance conditions.

  6. Cuprous oxide nanoparticles inhibit prostate cancer by attenuating the stemness of cancer cells via inhibition of the Wnt signaling pathway

    Science.gov (United States)

    Wang, Ye; Yang, Qi-Wei; Yang, Qing; Zhou, Tie; Shi, Min-Feng; Sun, Chen-Xia; Gao, Xiu-Xia; Cheng, Yan-Qiong; Cui, Xin-Gang; Sun, Ying-Hao

    2017-01-01

    Disordered copper metabolism plays a critical role in the development of various cancers. As a nanomedicine containing copper, cuprous oxide nanoparticles (CONPs) exert ideal antitumor pharmacological effects in vitro and in vivo. Prostate cancer is a frequently diagnosed male malignancy prone to relapse, and castration resistance is the main reason for endocrine therapy failure. However, whether CONPs have the potential to treat castration-resistant prostate cancer is still unknown. Here, using the castration-resistant PC-3 human prostate cancer cell line as a model, we report that CONPs can selectively induce apoptosis and inhibit the proliferation of cancer cells in vitro and in vivo without affecting normal prostate epithelial cells. CONPs can also attenuate the stemness of cancer cells and inhibit the Wnt signaling pathway, both of which highlight the great potential of CONPs as a new clinical castration-resistant prostate cancer therapy.

  7. Preparation of 3D nanoporous copper-supported cuprous oxide for high-performance lithium ion battery anodes.

    Science.gov (United States)

    Liu, Dequan; Yang, Zhibo; Wang, Peng; Li, Fei; Wang, Desheng; He, Deyan

    2013-03-01

    Three-dimensional (3D) nanoporous architectures can provide efficient and rapid pathways for Li-ion and electron transport as well as short solid-state diffusion lengths in lithium ion batteries (LIBs). In this work, 3D nanoporous copper-supported cuprous oxide was successfully fabricated by low-cost selective etching of an electron-beam melted Cu(50)Al(50) alloy and subsequent in situ thermal oxidation. The architecture was used as an anode in lithium ion batteries. In the first cycle, the sample delivered an extremely high lithium storage capacity of about 2.35 mA h cm(-2). A high reversible capacity of 1.45 mA h cm(-2) was achieved after 120 cycles. This work develops a promising approach to building reliable 3D nanostructured electrodes for high-performance lithium ion batteries.

  8. One-pot synthesis of cuprous oxide-reduced graphene oxide nanocomposite with enhanced photocatalytic and electrocatalytic performance

    Science.gov (United States)

    Han, Fugui; Li, Heping; Yang, Jun; Cai, Xiaodong; Fu, Li

    2016-03-01

    We report on the facile one-step synthesis of porous cuprous oxide nanoparticles on reduced graphene oxide (Cu2O-RGO) by synchronously reducing Cu2+ ions and GO with ethylene glycol. The basic chemical components, crystal structure and surface morphology of prepared nanocomposite was carefully characterized. The photocatalytic activities of the as-prepared nanocomposite was investigated by photodegrading methylene blue (MB) under visible light. The electrocatalytic property of the nanocomposite was investigated by electrocatalytic determination of acetaminophen. The results indicate that the corporation of RGO with Cu2O nanoparticles could high enhance the both photocatalytic and electrocatalytic properties. Moreover, we found that the content of RGO introduced into nanocomposite could highly affect the product properties.

  9. I. Cis-dichlorodiammineplatinum(II). Aquation equilibria and isotopic exchange of chloride ligands with free chloride and tetrachloroplatinate(II). II. The Szilard--Chalmers effect in solid-state systems containing the octa-. mu. /sub 3/-chloro-octahedro-hexamolybdenum(II) cluster

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K.W.

    1976-06-01

    A titration technique was utilized to determine the equilibrium quotients for the first and second aquation steps of cis-Pt(NH/sub 3/)/sub 2/Cl/sub 2/. At 25.0/sup 0/C and an ionic strength of 0.318 M the first and second aquation equilibrium constants are: K/sub 1/ = 3.63 +- 0.22 x 10/sup -3/ M, ..delta..H/sub 1//sup 0/ = 3.4 kcal and K/sub 2/ = 1.11 +- 0.14 x 10/sup -4/ M, ..delta..H/sub 2//sup 0/ = 10 kcal. In the ternary system, cis-Pt(NH/sub 3/)/sub 2/Cl/sub 2/:PtCl/sub 4//sup 2 -/:Cl/sup -/, the kinetics of isotopic exchange of chlorine was investigated. In addition to the expected route of exchange via aquation, a direct exchange of chlorine ligands between cis-Pt(NH/sub 3/)/sub 2/Cl/sub 2/ and PtCl/sub 4//sup 2 -/ occurred which is described by the rate expression. Separation procedures were devised for partial resolution of component yields resulting from dissolving a neutron-irradiated sample of (H/sub 3/O)/sub 2/((Mo/sub 6/Cl/sub 8/)Cl/sub 6/) . 6H/sub 2/O in 1.5 N HCl. A recrystallization procedure was formulated to determine the retention of activity in the parent compound of molybdenum(II) chloride clusters after neutron irradiation. The retention found in an aqueous 1.5 N HCl solution containing 1 percent (H/sub 3/O)/sub 2/((Mo/sub 6/Cl/sub 8/)Cl/sub 6/) . 6H/sub 2/O is 0.64 percent. For a solid sample of (H/sub 3/O)/sub 2/ ((Mo/sub 6/Cl/sub 8/)Cl/sub 6/) . 6H/sub 2/O aged 24 hours in Dry Ice after neutron irradiation, a retention of 7.0 percent was observed. Under the same conditions, a sample of (Mo/sub 6/Cl/sub 8/)Cl/sub 4/ with 0.8 percent and 2.7 percent water had retentions of 25.0 percent and 11.1 percent, respectively. Effects of thermal annealing and gamma ray treatment on solid samples of ((Mo/sub 6/Cl/sub 8/)Cl/sub 4/) . 2H/sub 2/O were investigated.

  10. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents experimentally based design parameters for Portland cement concretes with and without silica fume and fly ash...... in marine atmospheric and submersed South Scandinavian environment. The design parameters are based on sequential measurements of 86 chloride profiles taken over ten years from 13 different types of concrete. The design parameters provide the input for an analytical model for chloride profiles as function...

  11. A monomeric complex of ammonia and cuprous chloride: H{sub 3}N⋯CuCl isolated and characterised by rotational spectroscopy and ab initio calculations

    Energy Technology Data Exchange (ETDEWEB)

    Bittner, Dror M.; Zaleski, Daniel P.; Stephens, Susanna L.; Walker, Nicholas R., E-mail: nick.walker@newcastle.ac.uk, E-mail: a.c.legon@bristol.ac.uk [School of Chemistry, Newcastle University, Bedson Building, Newcastle upon Tyne, Tyne and Wear NE1 7RU (United Kingdom); Tew, David P.; Legon, Anthony C., E-mail: nick.walker@newcastle.ac.uk, E-mail: a.c.legon@bristol.ac.uk [School of Chemistry, University of Bristol, Bristol BS8 1TS (United Kingdom)

    2015-04-14

    The H{sub 3}N⋯CuCl monomer has been generated and isolated in the gas phase through laser vaporisation of a copper sample in the presence of low concentrations of NH{sub 3} and CCl{sub 4} in argon. The resulting complex cools to a rotational temperature approaching 2 K during supersonic expansion of the gas sample and is characterised by broadband rotational spectroscopy between 7 and 18.5 GHz. The spectra of six isotopologues are measured and analysed to determine rotational, B{sub 0}; centrifugal distortion, D{sub J}, D{sub JK}; and nuclear quadrupole coupling constants of Cu, Cl, and {sup 14}N nuclei, χ{sub aa} (X). The geometry of the complex is C{sub 3v} with the N, Cu, and Cl atoms located on the a inertial axis. Bond distances and the ∠(H —N⋯Cu) bond angle within the complex are precisely evaluated through fitting of geometrical parameters to the experimentally determined moments of inertia and through ab initio calculations at the CCSD(T)(F12*)/AVQZ level. The r(Cu —Cl), r(Cu —N), and ∠(H —N⋯Cu) parameters are, respectively, evaluated to be 2.0614(7) Å, 1.9182(13) Å, and 111.40(6)° in the r{sub 0} geometry, in good agreement with the ab initio calculations. Geometrical parameters evaluated for the isolated complex are compared with those established crystallographically for a solid-state sample of [Cu(NH{sub 3})Cl].

  12. Lithium Sulfuryl Chloride Battery.

    Science.gov (United States)

    Primary batteries , Electrochemistry, Ionic current, Electrolytes, Cathodes(Electrolytic cell), Anodes(Electrolytic cell), Thionyl chloride ...Phosphorus compounds, Electrical conductivity, Calibration, Solutions(Mixtures), Electrical resistance, Performance tests, Solvents, Lithium compounds

  13. Nonlinear optical properties of bulk cuprous oxide using single beam Z-scan at 790 nm

    Energy Technology Data Exchange (ETDEWEB)

    Serna, J.; Rueda, E. [Grupo de Óptica y Fotónica, Instituto de Física, Universidad de Antioquia U de A, Calle 70 No. 52-21, Medellín (Colombia); García, H., E-mail: hgarcia@siue.edu [Department of Physics, Southern Illinois University, Edwardsville, Illinois 60026 (United States)

    2014-11-10

    The two-photon absorption (TPA) coefficient β and the nonlinear index of refraction n{sub 2} for bulk cuprous oxide (Cu{sub 2}O) direct gap semiconductor single crystal have been measured by using a balance-detection Z-scan single beam technique, with an excellent signal to noise ratio. Both coefficients were measured at 790 nm using a 65 fs laser pulse at a repetition rate of 90.9 MHz, generated by a Ti:Sapphire laser oscillator. The experimental values for β were explained by using a model that includes allowed-allowed, forbidden-allowed, and forbidden-forbidden transitions. It was found that the forbidden-forbidden transition is the dominant mechanism, which is consistent with the band structure of Cu{sub 2}O. The low value for β found in bulk, as compared with respect to thin film, is explained in terms of the structural change in thin films that result in opposite parities of the conduction and valence band. The n{sub 2} is also theoretically calculated by using the TPA dispersion curve and the Kramers-Kronig relations for nonlinear optics.

  14. Novel Facile Technique for Synthesis of Stable Cuprous Oxide (Cu2O Nanoparticles – an Ageing Effect

    Directory of Open Access Journals (Sweden)

    Sachin S. Sawant

    2016-03-01

    Full Text Available A novel facile method to synthesize stable phase of Cuprous Oxide (Cu2O nanoparticles at room temperature is demonstrated. The structural and optical properties of (Cu2O nanoparticles were investigated by using X-ray diffraction (XRD, UV-VIS Spectroscopy. XRD analysis has indexed nanocrystalline nature of cubical phase Cu2O with an average edge length of about 20 nm. The Scanning Electron Microscopy (SEM measurements also ascertain the cubical morphology. The Fourier Transform Infrared Spectroscopy (FTIR affirms the presence of characteristic functional group of Cu2O. The absorbance peak at 485 nm in UV-VIS spectra also confirms the Cu2O synthesis. Furthermore, UV-VIS absorbance spectra at different ageing time substantiate the phase stability of Cu2O nanoparticles. The ageing leads to blue shift of absorbance peak mainly due to decrease in Cu2O particle size with no additional absorbance peak in UV-VIS spectra indicating the formation of secondary phase. The reduction in particle size may be attributed to tiny conversion Cu2O to CuO. The energy band gap measurements from Tauc plots for Cu2O nanoparticles shows the increasing trend (2.5 eV to 2.8 eV with ageing time (2 months, owing to quantum confinement effects.

  15. Effect of cuprous halide interlayers on the device performance of ZnPc/C{sub 60} organic solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jinho; Park, Dasom; Heo, Ilsu; Yim, Sanggyu, E-mail: sgyim@kookmin.ac.kr

    2014-10-15

    Highlights: • Effect of CuX interlayers on subsequently deposited films and devices was studied. • CuI is the most effective for the performance of ZnPc/C{sub 60}-based solar cells. • Results were related to the molecular geometry of ZnPc and HOMO level of interlayers. - Abstract: The effect of various cuprous halide (CuX) interlayers introduced between a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) layer and zinc phthalocyanine (ZnPc) layer on the physical properties of the ZnPc thin films and device performances of ZnPc/C{sub 60}-based small-molecule organic solar cells was studied. Strong substrate–molecule interaction between the CuX and ZnPc partly converted surface-perpendicular stacking geometry of ZnPc molecules into surface-parallel one. This flat-lying geometry led to an enhancement in electronic absorption and charge transport within the ZnPc films. As a result, the overall power conversion efficiency of the cell with CuI interlayer increased by ∼37%. In the case of the cells with CuBr and CuCl interlayer, however, the enhancement in device performances was limited because of the reduced conversion of the molecular geometry and increased energy barrier for hole extraction due to the low highest occupied molecular orbital level of the interlayer.

  16. Preparation of cuprous oxides with different sizes and their behaviors of adsorption, visible-light driven photocatalysis and photocorrosion

    Science.gov (United States)

    Huang, Lei; Peng, Feng; Yu, Hao; Wang, Hongjuan

    2009-01-01

    Cuprous oxide (Cu 2O) nanoparticles and microparticles have been prepared by liquid phase chemical synthesis. The samples were characterized by means of SEM, XRD, UV/DRS and XPS. It was presented that as-prepared Cu 2O nanoparticles are substantially stable in ambient atmosphere and the Cu + as main state exists on the surface of Cu 2O nanoparticles. As-prepared Cu 2O microparticles can exist stably as a Cu 2O/CuO core/shell structure; and the Cu 2+ as main state exists on the surface of Cu 2O microparticles. The behaviors of adsorption, photocatalysis and photocorrosion of Cu 2O particles with different sizes were investigated in detail. The results show that Cu 2O nanoparticles are very easy to photocorrosion during the photocatalytic reaction, which cannot be used as photocatalyst directly to degrade organic compound, although as-prepared Cu 2O nanoparticles exhibit special property of adsorption. Cu 2O microparticles have a higher photocatalytic activity than Cu 2O nanoparticles because of its slower photocorrosion rate, although Cu 2O microparticles have much lower adsorption capacity than Cu 2O nanoparticles. The mechanisms of photocatalysis and photocorrosion for Cu 2O under visible light were also discussed.

  17. DFT Study of Effects of Potassium Doping on Band Structure of Crystalline Cuprous Azide

    Institute of Scientific and Technical Information of China (English)

    ZHU,Wei-Hua; ZHANG,Xiao-Wen; WEI,Tao; XIAO,He-Ming

    2008-01-01

    The structure and defect formation energies of the K-doped CuN3 were studied using density functional theory within the generalized gradient approximation. The results show that the K-doping breaks the azide symmetry and causes asymmetric atomic displacement. As the K-doping level increases, the band gap of the doped system gradually increases. The K impurity is easily incorporated into the crystal thermodynamically. The Cu vacancy is easily created thermodynamically and the K impurity can serve as nucleation centers for vacancy clustering. Finally the effects of K-doping concentrations on the sensitivity of CuN3 were understood based on electronic structures.

  18. Optical Study of Cuprous Oxide and Ferric Oxide Based Materials for Applications in Low Cost Solar Cells

    Science.gov (United States)

    Than, Thi Cuc; Bui, Bao Thoa; Wegmuller, Benjamin; Nguyen, Minh Hieu; Hoang Ngoc, Lam Huong; Bui, Van Diep; Nguyen, Quoc Hung; Hoang, Chi Hieu; Nguyen-Tran, Thuat

    2016-05-01

    One of the interesting forms of cuprous oxide and ferric oxide based materials is CuFeO2 which can be a delafossite-type compound and is a well known p-type semiconductor. This compound makes up an interesting family of materials for technological applications. CuFeO2 thin films recently gained renewed interest for potential applications in solar cell devices especially as absorption layers. One of the interesting facts is that CuFeO2 is made from cheap materials such as copper and iron. In this study, CuFeO2 thin films are intentionally deposited on corning glass and silicon substrates by the radio-frequency and direct current sputtering method with complicated and well developed co-sputtering recipes. The deposition was performed at room temperature which leads to an amorphous phase with extremely low roughness and high density. The films also were annealed at 500°C in 5% H2 in Ar for the passivation. A detailed optical study was performed on these thin films by spectroscopic ellipsometry and by ultra-violet visible near infrared spectroscopy. Depending on sputtering conditions, the direct band gap was extrapolated to be from 1.96 eV to 2.2 eV and 2.92 eV to 2.96 eV and the indirect band gap is about 1.22 eV to 1.42 eV. A good electrical conduction is also observed which is suitable for solar cell applications. In future more study on the structural properties will be carried out in order to fully understand these materials.

  19. A novel reducing graphene/polyaniline/cuprous oxide composite hydrogel with unexpected photocatalytic activity for the degradation of Congo red

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Jie; Xie, Anjian; Li, Shikuo; Huang, Fangzhi; Cao, Juan; Shen, Yuhua, E-mail: yhshen@ahu.edu.cn

    2016-01-01

    Graphical abstract: Excellent photocatalytic activity of the RGO/PANI/Cu{sub 2}O composite hydrogel for CR degradation under UV–vis light irradiation. - Highlights: • The RGO/PANI/Cu{sub 2}O composite hydrogel was first synthesized via a facile method. • Photocatalytic performance was studied under UV–vis light. • The ternary composite hydrogel shows unexpected photocatalytic activity. • A possible photocatalysis mechanism was illustrated. - Abstract: In this work, a novel reducing graphene/polyaniline/cuprous oxide (RGO/PANI/Cu{sub 2}O) composite hydrogel with a 3D porous network has been successfully prepared via a one-pot method in the presence of cubic Cu{sub 2}O nanoparticles. The as-synthesized ternary composites hydrogel shows unexpected photocatalytic activity such that Congo red (CR) degradation efficiency can reaches 97.91% in 20 min under UV–vis light irradiation, which is much higher than that of either the single component (Cu{sub 2}O nanoparticles), or two component systems (RGO/Cu{sub 2}O composite hydrogel and PANI/Cu{sub 2}O nanocomposites). Furthermore, the ternary composite hydrogel exhibits high stability and do not show any significant loss after five recycles. Such outstanding photocatalytic activity of the RGO/PANI/Cu{sub 2}O composite hydrogel was ascribed to the high absorption ability of the product for CR and the synergic effect among RGO, PANI and Cu{sub 2}O in photocatalytic process. The product of this work would provide a new sight for the construction of UV–vis light responsive photocatalyst with high performance.

  20. chloride mass balance

    African Journals Online (AJOL)

    Agadaga

    1Geology Department, Faculty of Sciences and Techniques, University ... characterization of groundwater, rainfall and the unsaturated zone were also carried out using a .... 2008 in collaboration with the Senegal National Meteorological .... [Cl]sm is estimated as average chloride concentration in ..... sands of Australia.

  1. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    and time, and where both the surface chloride concentration and the diffusion coefficient are allowed to vary in time; the Mejlbro-Poulsen model is the general solution to Fick’s 2nd law. The paper also presents conversion formulas for the four decisive but rather abstract parameters to parameters, which...

  2. Preparation of Cystein from Cysteine Cuprous Mercaptide%由半胱氨酸亚铜制取半胱氨酸

    Institute of Scientific and Technical Information of China (English)

    刘勋; 胡敏; 姚小平

    2015-01-01

    In this paper ,a new preparation method of cysteine hydrochloride monohydrate from cysteine cu‐prous mcercaptide ,which is prepared by the reduction and precipitation of cystine with cuprous oxide has been introduced ,including re‐precipitation of cysteine cuprous mercaptide ,removal of copper using H2 S , decoloration ,crystallization and recrystalization .The yield of the product is up to 12 .4% ,with the quality according with the Japanese AJI standards .%研究了一种用氧化亚铜将胱氨酸还原沉淀为半胱氨酸亚铜,再由此制备半胱氨酸盐酸盐一水物的新方法.该方法包含半胱氨酸亚铜再沉淀,H2 S法脱铜,脱色,产品结晶,重结晶等步骤,半胱氨酸盐酸盐一水物收率达12.4%,产品质量符合日本味之素标准.

  3. Electrocatalytic Production of C3-C4 Compounds by Conversion of CO2 on a Chloride-Induced Bi-Phasic Cu2O-Cu Catalyst.

    Science.gov (United States)

    Lee, Seunghwa; Kim, Dahee; Lee, Jaeyoung

    2015-12-01

    Electrocatalytic conversion of carbon dioxide (CO2) has recently received considerable attention as one of the most feasible CO2 utilization techniques. In particular, copper and copper-derived catalysts have exhibited the ability to produce a number of organic molecules from CO2. Herein, we report a chloride (Cl)-induced bi-phasic cuprous oxide (Cu2O) and metallic copper (Cu) electrode (Cu2OCl) as an efficient catalyst for the formation of high-carbon organic molecules by CO2 conversion, and identify the origin of electroselectivity toward the formation of high-carbon organic compounds. The Cu2OCl electrocatalyst results in the preferential formation of multi-carbon fuels, including n-propanol and n-butane C3-C4 compounds. We propose that the remarkable electrocatalytic conversion behavior is due to the favorable affinity between the reaction intermediates and the catalytic surface.

  4. Benzalkonium Chloride and Glaucoma

    OpenAIRE

    Rasmussen, Carol A.; Kaufman, Paul L.; Kiland, Julie A.

    2014-01-01

    Glaucoma patients routinely take multiple medications, with multiple daily doses, for years or even decades. Benzalkonium chloride (BAK) is the most common preservative in glaucoma medications. BAK has been detected in the trabecular meshwork (TM), corneal endothelium, lens, and retina after topical drop installation and may accumulate in those tissues. There is evidence that BAK causes corneal and conjunctival toxicity, including cell loss, disruption of tight junctions, apoptosis and preapo...

  5. Oxomemazine hydro-chloride.

    Science.gov (United States)

    Siddegowda, M S; Butcher, Ray J; Akkurt, Mehmet; Yathirajan, H S; Ramesh, A R

    2011-08-01

    IN THE TITLE COMPOUND [SYSTEMATIC NAME: 3-(5,5-dioxo-phen-othia-zin-10-yl)-N,N,2-trimethyl-propanaminium chloride], C(18)H(23)N(2)O(2)S(+)·Cl(-), the dihedral angle between the two outer aromatic rings of the phenothia-zine unit is 30.5 (2)°. In the crystal, the components are linked by N-H⋯Cl and C-H⋯Cl hydrogen bonds and C-H⋯π inter-actions.

  6. Characterizations of Cuprous Oxide Thin Films Prepared by Sol-Gel Spin Coating Technique with Different Additives for the Photoelectrochemical Solar Cell

    Directory of Open Access Journals (Sweden)

    D. S. C. Halin

    2014-01-01

    Full Text Available Cuprous oxide (Cu2O thin films were deposited onto indium tin oxide (ITO coated glass substrate by sol-gel spin coating technique using different additives, namely, polyethylene glycol and ethylene glycol. It was found that the organic additives added had a significant influence on the formation of Cu2O films and lead to different microstructures and optical properties. The films were characterized by X-ray diffraction (XRD, field emission scanning electron microscopy (FESEM, and ultraviolet-visible spectroscopy (UV-Vis. Based on the FESEM micrographs, the grain size of film prepared using polyethylene glycol additive has smaller grains of about 83 nm with irregular shapes. The highest optical absorbance film was obtained by the addition of polyethylene glycol. The Cu2O thin films were used as a working electrode in the application of photoelectrochemical solar cell (PESC.

  7. A perfectly aligned 63 helical tubular cuprous bromide single crystal for selective photo-catalysis, luminescence and sensing of nitro-explosives.

    Science.gov (United States)

    Yao, Ru-Xin; Hailili, Reshalaiti; Cui, Xin; Wang, Li; Zhang, Xian-Ming

    2015-02-21

    A perfectly aligned 63 helical tubular cuprous bromide single crystal has been synthesized and characterized, which can selectively decompose negatively charged dyes of Methyl Orange (MO) and Kermes Red (KR), and the photocatalytic efficiency is higher than that of nanosized (∼25 nm) TiO2 and ZnO. The direction and magnitude of the dipole moments as well as the band structure were calculated to reveal high photocatalytic efficiency. Moreover, luminescence studies indicate that the CuBr tube materials show very strong yellowish green emissions in the solid state and emulsion even at room temperature, and exhibit extremely high detection sensitivity towards nitro-explosives via fluorescence quenching. Detectable luminescence responses were observed at a very low concentration of 20 ppm with a high quenching efficiency of 94.90%. The results suggest that they may be promising multifunctional materials for photo-catalysis, luminescence and sensing of nitro-explosives.

  8. Metastable fragmentation of silver bromide clusters

    Energy Technology Data Exchange (ETDEWEB)

    L' Hermite, J.M.; Rabilloud, F.; Marcou, L.; Labastie, P. [Lab. CAR/IRSAMC, Univ. Paul Sabatier, Toulouse (France)

    2001-06-01

    The abundance spectra and the fragmentation channels of silver bromide clusters have been measured and analyzed. The most abundant species are Ag{sub n}Br{sub n} {sub -} {sub 1}{sup +} and Ag {sub n}Br {sub n} {sub +} {sub 1}{sup -} and Ag {sub 14}Br {sub 13}{sup +} is a magic number, revealing their ionic nature. However, some features depart from what is generally observed for alkali-halide ionic clusters. From a certain size, Ag {sub n}Br {sub n} {sub -} {sub 1}{sup +} is no more the main series, and Ag {sub n}Br {sub n} {sub -} {sub 2,} {sub 3}{sup +} series become almost as important. The fast fragmentation induced by a UV laser makes the cations lose more bromine than silver ions and lead to more silver-rich clusters. Negative ions mass spectra contain also species with more silver atoms than required by stoichiometry. We have investigated the metastable fragmentation of the cations using a new experimental method. The large majority of the cations release mainly a neutral Ag {sub 3}Br {sub 3} cluster. These decay channels are in full agreement with our recent ab initio DFT calculations, which show that Ag {sup +}-Ag {sup +} repulsion is reduced due to a globally attractive interaction of their d orbitals. This effect leads to a particularly stable trimer (AgBr) {sub 3} and to quasi-planar cyclic structures of (AgBr) {sub n} clusters up to n = 6. We have shown that these two features may be extended to other silver halides, to silver hydroxides (AgOH) {sub n}, and to cuprous halide compounds. (orig.)

  9. Chloride on the Move

    KAUST Repository

    Li, Bo

    2017-01-09

    Chloride (Cl−) is an essential plant nutrient but under saline conditions it can accumulate to toxic levels in leaves; limiting this accumulation improves the salt tolerance of some crops. The rate-limiting step for this process – the transfer of Cl− from root symplast to xylem apoplast, which can antagonize delivery of the macronutrient nitrate (NO3−) to shoots – is regulated by abscisic acid (ABA) and is multigenic. Until recently the molecular mechanisms underpinning this salt-tolerance trait were poorly defined. We discuss here how recent advances highlight the role of newly identified transport proteins, some that directly transfer Cl− into the xylem, and others that act on endomembranes in ‘gatekeeper’ cell types in the root stele to control root-to-shoot delivery of Cl−.

  10. Benzalkonium chloride and glaucoma.

    Science.gov (United States)

    Rasmussen, Carol A; Kaufman, Paul L; Kiland, Julie A

    2014-01-01

    Glaucoma patients routinely take multiple medications, with multiple daily doses, for years or even decades. Benzalkonium chloride (BAK) is the most common preservative in glaucoma medications. BAK has been detected in the trabecular meshwork (TM), corneal endothelium, lens, and retina after topical drop installation and may accumulate in those tissues. There is evidence that BAK causes corneal and conjunctival toxicity, including cell loss, disruption of tight junctions, apoptosis and preapoptosis, cytoskeleton changes, and immunoinflammatory reactions. These same effects have been reported in cultured human TM cells exposed to concentrations of BAK found in common glaucoma drugs and in the TM of primary open-angle glaucoma donor eyes. It is possible that a relationship exists between chronic exposure to BAK and glaucoma. The hypothesis that BAK causes/worsens glaucoma is being tested experimentally in an animal model that closely reflects human physiology.

  11. Studies Update Vinyl Chloride Hazards.

    Science.gov (United States)

    Rawls, Rebecca

    1980-01-01

    Extensive study affirms that vinyl chloride is a potent animal carcinogen. Epidemiological studies show elevated rates of human cancers in association with extended contact with the compound. (Author/RE)

  12. Parameters Affecting Hydrogen Chloride Measurements

    Science.gov (United States)

    1993-06-01

    contain sea salt, which is hygroscopic because of the magnesium chloride present, or ammonium bisulfate , which mostly comes from sulfur pollution and is...boosters release hydrogen chloride as a combustion product, and hydrazines or nitric acid can be spilled from liquid fuel motors. Monitoring the...solubility constant, and the second is the acid ionization constant. From experimental work, the product of the two constants is well established (Reference

  13. Cuprous Iodide Catalyzed Synthesis of Diaryl Selenide and Telluride from Organoboronic Acids with Diphenyl Diselenide and Ditelluride

    Institute of Scientific and Technical Information of China (English)

    WANG,Lei; WANG,Min; YAN,Jin-Can; LI,Pin-Hua

    2004-01-01

    @@ Organoselenium and tellurium compounds have received much attention not only as synthetic reagents or intermediates in organic synthesis but also as promising donor molecules for conductive materials.[1] A number of synthetic methods have been reported to prepare organoselenium and tellurium derivatives. A convenient and general method to introduce a selenium or tellurium moiety into organic molecules is the reaction of a metal selenolate or tellurolate with appropriate electrophiles such as organic halides, acyl chlorides, epoxides, and α, β-enones.[2] However, it is difficult to synthesize the unsymmetrical diarylselenides and tellurides through the reaction of selenide anion with organic halides because of the less reactivity of aryl halides. To accomplish this purpose, the reaction (iodobenzene with phenylselenol)was generally carried out in the presence of catalysts, ligands and strong bases. But, the reaction needs longer time to accomplish and form the products in moderate yields.

  14. Chloride channels in stroke

    Institute of Scientific and Technical Information of China (English)

    Ya-ping ZHANG; Hao ZHANG; Dayue Darrel DUAN

    2013-01-01

    Vascular remodeling of cerebral arterioles,including proliferation,migration,and apoptosis of vascular smooth muscle cells (VSMCs),is the major cause of changes in the cross-sectional area and diameter of the arteries and sudden interruption of blood flow or hemorrhage in the brain,ie,stroke.Accumulating evidence strongly supports an important role for chloride (Clˉ) channels in vascular remodeling and stroke.At least three Clˉ channel genes are expressed in VSMCs:1) the TMEM16A (or Ano1),which may encode the calcium-activated Clˉ channels (CACCs); 2) the CLC-3 Clˉ channel and Clˉ/H+ antiporter,which is closely related to the volume-regulated Clˉ channels (VRCCs); and 3) the cystic fibrosis transmembrane conductance regulator (CFTR),which encodes the PKA-and PKC-activated Clˉ channels.Activation of the CACCs by agonist-induced increase in intracellular Ca2+ causes membrane depolarization,vasoconstriction,and inhibition of VSMC proliferation.Activation of VRCCs by cell volume increase or membrane stretch promotes the production of reactive oxygen species,induces proliferation and inhibits apoptosis of VSMCs.Activation of CFTR inhibits oxidative stress and may prevent the development of hypertension.In addition,Clˉ current mediated by gammaaminobutyric acid (GABA) receptor has also been implicated a role in ischemic neuron death.This review focuses on the functional roles of Clˉ channels in the development of stroke and provides a perspective on the future directions for research and the potential to develop Clˉ channels as new targets for the prevention and treatment of stroke.

  15. 21 CFR 184.1138 - Ammonium chloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium chloride. 184.1138 Section 184.1138 Food... Specific Substances Affirmed as GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS Reg. No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution....

  16. Cluster headache

    Science.gov (United States)

    Histamine headache; Headache - histamine; Migrainous neuralgia; Headache - cluster; Horton's headache; Vascular headache - cluster ... A cluster headache begins as a severe, sudden headache. The headache commonly strikes 2 to 3 hours after you fall ...

  17. Cluster Forests

    CERN Document Server

    Yan, Donghui; Jordan, Michael I

    2011-01-01

    Inspired by Random Forests (RF) in the context of classification, we propose a new clustering ensemble method---Cluster Forests (CF). Geometrically, CF randomly probes a high-dimensional data cloud to obtain "good local clusterings" and then aggregates via spectral clustering to obtain cluster assignments for the whole dataset. The search for good local clusterings is guided by a cluster quality measure $\\kappa$. CF progressively improves each local clustering in a fashion that resembles the tree growth in RF. Empirical studies on several real-world datasets under two different performance metrics show that CF compares favorably to its competitors. Theoretical analysis shows that the $\\kappa$ criterion is shown to grow each local clustering in a desirable way---it is "noise-resistant." A closed-form expression is obtained for the mis-clustering rate of spectral clustering under a perturbation model, which yields new insights into some aspects of spectral clustering.

  18. Star Clusters

    OpenAIRE

    Gieles, M.

    1993-01-01

    Star clusters are observed in almost every galaxy. In this thesis we address several fundamental problems concerning the formation, evolution and disruption of star clusters. From observations of (young) star clusters in the interacting galaxy M51, we found that clusters are formed in complexes of stars and star clusters. These complexes share similar properties with giant molecular clouds, from which they are formed. Many (70%) of the young clusters will not survive the fist 10 Myr, due to t...

  19. 46 CFR 151.50-34 - Vinyl chloride (vinyl chloride monomer).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride (vinyl chloride monomer). 151.50-34... chloride (vinyl chloride monomer). (a) Copper, aluminum, magnesium, mercury, silver, and their alloys shall... equipment that may come in contact with vinyl chloride liquid or vapor. (b) Valves, flanges, and...

  20. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... dichloride, vinyl chloride and polyvinyl chloride plants. 61.65 Section 61.65 Protection of Environment... AIR POLLUTANTS National Emission Standard for Vinyl Chloride § 61.65 Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants. An owner or operator of an ethylene...

  1. CHLORIDE WASHER PERFORMACE TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, J; David Best, D; Robert Pierce, R

    2007-11-30

    Testing was performed to determine the chloride (Cl-) removal capabilities of the Savannah River National Laboratory (SRNL) designed and built Cl- washing equipment intended for HB-Line installation. The equipment to be deployed was tested using a cerium oxide (CeO2) based simulant in place of the 3013 plutonium oxide (PuO2) material. Two different simulant mixtures were included in this testing -- one having higher Cl- content than the other. The higher Cl- simulant was based on K-Area Interim Surveillance Inspection Program (KIS) material with Cl- content approximately equal to 70,000 ppm. The lower Cl- level simulant was comparable to KIS material containing approximately 8,000-ppm Cl- content. The performance testing results indicate that the washer is capable of reducing the Cl- content of both surrogates to below 200 ppm with three 1/2-liter washes of 0.1M sodium hydroxide (NaOH) solution. Larger wash volumes were used with similar results - all of the prescribed test parameters consistently reduced the Cl- content of the surrogate to a value below 200 ppm Cl- in the final washed surrogate material. The washer uses a 20-micron filter to retain the surrogate solids. Tests showed that 0.16-0.41% of the insoluble fraction of the starting mass passed through the 20-micron filter. The solids retention performance indicates that the fissile masses passing through the 20-micron filter should not exceed the waste acceptance criteria for discard in grout to TRU waste. It is recommended that additional testing be pursued for further verification and optimization purposes. It is likely that wash volumes smaller than those tested could still reduce the Cl- values to acceptable levels. Along with reduced wash volumes, reuse of the third wash volume (in the next run processed) should be tested as a wash solution minimization plan. A 67% reduction in the number of grouted paint pails could be realized if wash solution minimization testing returned acceptable results.

  2. Multilayer core-shell structured composite paper electrode consisting of copper, cuprous oxide and graphite assembled on cellulose fibers for asymmetric supercapacitors

    Science.gov (United States)

    Wan, Caichao; Jiao, Yue; Li, Jian

    2017-09-01

    An easily-operated and inexpensive strategy (pencil-drawing-electrodeposition-electro-oxidation) is proposed to synthesize a novel class of multilayer core-shell structured composite paper electrode, which consists of copper, cuprous oxide and graphite assembled on cellulose fibers. This interesting electrode structure plays a pivotal role in providing more active sites for electrochemical reactions, facilitating ion and electron transport and shorting their diffusion pathways. This electrode demonstrates excellent electrochemical properties with a high specific capacitance of 601 F g-1 at 2 A g-1 and retains 83% of this capacitance when operated at an ultrahigh current density of 100 A g-1. In addition, a high energy density of 13.4 W h kg-1 at the power density of 0.40 kW kg-1 and a favorable cycling stability (95.3%, 8000 cycles) were achieved for this electrode. When this electrode was assembled into an asymmetric supercapacitor with carbon paper as negative electrode, the device displays remarkable electrochemical performances with a large areal capacitances (122 mF cm-2 at 1 mA cm-2), high areal energy density (10.8 μW h cm-2 at 402.5 μW cm-2) and outstanding cycling stability (91.5%, 5000 cycles). These results unveil the potential of this composite electrode as a high-performance electrode material for supercapacitors.

  3. Photocatalytic Degradation of Rhodamine B by Cuprous Oxide%氧化亚铜光催化降解罗丹明 B

    Institute of Scientific and Technical Information of China (English)

    黄涛; 吕重安; 杨水金

    2014-01-01

    Cuprous oxide ( Cu2 O) was successfully prepared by the method of reduction in aqueous at room temperature.All the powders were characterized by X -rays diffraction ( XRD) and scanning electron microscopy ( SEM) .The effect of different factors on the degradation was investigated .The best reaction conditions were found out.The photocatalytic degradation of rhodamine B by Cu 2 O under simulated natural light irradiation was investiga-ted.The results demonstrated that initial concentration of rhodamine B is 10 mg/L, catalyst dosage is 0.38 g/L and the pH is 5.2, the degradation ratio of rhodamine B is as high as 96.5%after 30 minutes simulated natural light ir-radiation .%利用室温液相还原法制备了氧化亚铜,通过XRD、 SEM对其进行了表征,探讨了该催化剂对罗丹明B的光催化降解的活性。在催化剂用量为0.38 g/L,过氧化氢量为1.8 mL,罗丹明B的浓度为10 mg/L, pH为5.2的条件下,光照30 min后罗丹明B的降解率为96.5%。

  4. 铜粉处理酸性镀铜溶液中氯离子的机理%Mechanism of Treating Chloride Ion in Acidic Copper Plating Bath with Copper Powder

    Institute of Scientific and Technical Information of China (English)

    郭崇武

    2011-01-01

    阐明了用铜粉处理酸性镀铜溶液中氯离子的机理,理论分析和实验表明,在酸性镀铜溶液中,Cu2+离子与铜粉反应生成Cu+离子,同时氯离子与Cu+离子反应生成氯化亚铜沉淀.向镀液中加铜粉1g/L,氯离子的起始质量浓度为174mg/L时,氯离子的去除率为58.9%,而向镀液中加锌粉1g/L,氯离子的去除率为47.0%,用铜粉处理氯离子的效率较高.%The mechanism of treating chloride ion in acidic copper plating bath by using copper powder was illustrated. Theoretical analyses and experimental tests indicated that in acidic copper plating solution Cu2+ ion could react with copper powder to form Cu + ion and the Cu + ion could react with chloride ion in the solution to produce cuprous chloride precipitation. When the initial mass concentration of the chloride ions in the acidic copper plating solution was 174 mg/L, the elimination rate of chloride ions after adding 1 g/L copper powders to the solution was 58.9% while that after adding 1 g/L zinc powders was 47.0%. This indicates that the treatment efficiency of chloride ion in the acidic copper plating solution with copper powders is higher than that with zinc powders.

  5. Electrochemical Chloride extraction using external electrodes?

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Pedersen, Anne Juul

    2006-01-01

    Electrochemical methods for the removal of chloride from concrete have been developed and the methods are primarily designed for situations where corrosion has started due to an increased chloride concentration in the vicinity of the reinforcement. In these methods the reinforcement is used...... as the cathode. However, some unwanted side effects can occur, including alkali-silica reaction and in some cases hydrogen embrittlement. It is also suggested also to use electrochemical chloride extraction in a preventive way in constructions where chloride induced corrosion is likely to be a problem after...... a period of time, i.e. remove the chlorides before the chloride front reaches the reinforcement. If the chlorides are removed from outer few centimetres from the surface, the chloride will not reach the reinforcement and cause damage. By using the electrochemical chloride removal in this preventive way...

  6. Weighted Clustering

    DEFF Research Database (Denmark)

    Ackerman, Margareta; Ben-David, Shai; Branzei, Simina

    2012-01-01

    We investigate a natural generalization of the classical clustering problem, considering clustering tasks in which different instances may have different weights.We conduct the first extensive theoretical analysis on the influence of weighted data on standard clustering algorithms in both...... the partitional and hierarchical settings, characterizing the conditions under which algorithms react to weights. Extending a recent framework for clustering algorithm selection, we propose intuitive properties that would allow users to choose between clustering algorithms in the weighted setting and classify...

  7. Lubiprostone: a chloride channel activator.

    Science.gov (United States)

    Lacy, Brian E; Levy, L Campbell

    2007-04-01

    In January 2006 the Food and Drug Administration approved lubiprostone for the treatment of chronic constipation in men and women aged 18 and over. Lubiprostone is categorized as a prostone, a bicyclic fatty acid metabolite of prostaglandin E1. Lubiprostone activates a specific chloride channel (ClC-2) in the gastrointestinal (GI) tract to enhance intestinal fluid secretion, which increases GI transit and improves symptoms of constipation. This article reviews the role of chloride channels in the GI tract, describes the structure, function, and pharmacokinetics of lubiprostone, and discusses clinically important data on this new medication.

  8. Chloride : The queen of electrolytes?

    NARCIS (Netherlands)

    Berend, Kenrick; van Hulsteijn, Leonard Hendrik; Gans, Rijk O. B.

    2012-01-01

    Background: Channelopathies, defined as diseases that are caused by mutations in genes encoding ion channels, are associated with a wide variety of symptoms and have been documented extensively over the past decade. In contrast, despite the important role of chloride in serum, textbooks in general d

  9. 1,5-Diaminotetrazolium chloride

    Directory of Open Access Journals (Sweden)

    Ling-Qiao Meng

    2010-04-01

    Full Text Available The title compound, CH5N6+·Cl−, crystallized with two indepedent 1,5-diaminotetrazolium cations and two independent chloride anions in the asymmetric unit. In the crystal, there are a number of N—H...Cl hydrogen-bonding interactions, which generate a three-dimensional network.

  10. [Headspace GC/MS analysis of residual vinyl chloride and vinylidene chloride in polyvinyl chloride and polyvinylidene chloride products].

    Science.gov (United States)

    Ohno, Hiroyuki; Mutsuga, Motoh; Kawamura, Yoko; Suzuki, Masako; Aoyama, Taiki

    2005-02-01

    A headspace GC/MS analysis method for the simultaneous determination of residual vinyl chloride (VC) and vinylidene chloride (VDC) in polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC) products was developed. A test sample was swelled overnight with N,N-dimethylacetamide in a sealed vial. The vial was incubated for 1 hour at 90 degrees C, then the headspace gas was analyzed by GC/MS using a PLOT capillary column. The recoveries from spiked PVC and PVDC samples were 90.0-112.3% for VC and 85.2-108.3% for VDC. The determination limits were 0.01 microg/g for VC and 0.06/microg/g for VDC, respectively. By this method, VC was detected in two PVC water supply pipes at the levels of 0.61 and 0.01 microg/g. On the other hand, VC and VDC were not detected in any of the food container-packages or toys tested.

  11. Ultrasound promoted mild and facile one-pot, three component synthesis of 2H-indazoles by consecutive condensation, CN and NN bond formations catalysed by copper-doped silica cuprous sulphate (CDSCS) as an efficient heterogeneous nano-catalyst.

    Science.gov (United States)

    Soltani Rad, Mohammad Navid

    2017-01-01

    An ultrasonic promoted facile and convenient one-pot three-component procedure for the synthesis of 2H-indazole derivatives using copper-doped silica cuprous sulphate (CDSCS) as a heterogeneous nano-catalyst has been described. In this approach, ultrasonic mediated reaction of different substituted 2-bromobenzaldehydes, structurally diverse primary amines, and tetrabutylammonium azide (TBAA) as an azide source in the presence of CDSCS in DMSO at room temperature furnishes 2H-indazoles in good to excellent yields. Utilizing ultrasonic irradiation techniques provided the dramatic improvements in terms of higher yields and shorter reaction times compared with conventional heating method.

  12. 21 CFR 173.375 - Cetylpyridinium chloride.

    Science.gov (United States)

    2010-04-01

    ... CONSUMPTION Specific Usage Additives § 173.375 Cetylpyridinium chloride. Cetylpyridinium chloride (CAS Reg. No... Nutrition's Library, Food and Drug Administration, 5100 Paint Branch Pkwy., College Park, MD 20740, or...

  13. Cupric and cuprous oxide by reactive ion beam sputter deposition and the photosensing properties of cupric oxide metal–semiconductor–metal Schottky photodiodes

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Min-Jyun; Lin, Yong-Chen; Chao, Liang-Chiun, E-mail: lcchao@mail.ntust.edu.tw; Lin, Pao-Hung; Huang, Bohr-Ran

    2015-08-15

    Highlights: • CuO and Cu{sub 2}O were deposited by reactive ion beam sputter deposition. • Single phase CuO thin film is obtained with Ar:O{sub 2} = 2:1. • CuO MSM PD shows photoresponse from 400 nm to 1.30 μm. • CuO MSM PD is RC limited with a decay time less than 1 μs. - Abstract: Cupric (CuO) and cuprous (Cu{sub 2}O) oxide thin films have been deposited by reactive ion beam sputter deposition at 400 °C with an Ar:O{sub 2} ratio from 2:1 to 12:1. With an Ar:O{sub 2} ratio of 2:1, single phase polycrystalline CuO thin films were obtained. Decreasing oxygen flow rate results in CuO + Cu{sub 2}O and Cu{sub 2}O + Cu mixed thin films. As Ar:O{sub 2} ratio reaches 12:1, Cu{sub 2}O nanorods with diameter of 250 nm and length longer than 1 μm were found across the sample. Single phase CuO thin film exhibits an indirect band gap of 1.3 eV with a smooth surface morphology. CuO metal–semiconductor–metal (MSM) Schottky photodiodes (PD) were fabricated by depositing Cu interdigitated electrodes on CuO thin films. Photosensing properties of the CuO PD were characterized from 350 to 1300 nm and a maximum responsivity of 43 mA/W was found at λ = 700 nm. The MSM PD is RC limited with a decay time constant less than 1 μs.

  14. Progress of Carbonation in Chloride Contaminated Concretes

    OpenAIRE

    Wang, Yaocheng; Basheer, P. A.M.; Nanukuttan, S; Bai, Y.

    2016-01-01

    Concretes used in marine environment are generally under the cyclic effect of CO2 and chloride ions (Cl-). To date, the influence of carbonation on ingress of chloride ions in concretes has been widely studied; in comparison, study on the influence of Cl- on the progress of carbonation is limited. During the study, concretes were exposed to independent and combined mechanisms of carbonation and chloride ingress regimes. Profiles of apparent pH and chloride concentration were used to indicate ...

  15. Microbial reductive dehalogenation of vinyl chloride

    Energy Technology Data Exchange (ETDEWEB)

    Spormann, Alfred M [Stanford, CA; Muller, Jochen A [Baltimore, MD; Rosner, Bettina M [Berlin, DE; Von Abendroth, Gregory [Mannheim, DE; Meshulam-Simon, Galit [Los Angeles, CA; McCarty, Perry L [Stanford, CA

    2014-02-11

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  16. Cystic Fibrosis (CF): Chloride Sweat Test

    Science.gov (United States)

    ... Old Feeding Your 1- to 2-Year-Old Cystic Fibrosis (CF) Chloride Sweat Test KidsHealth > For Parents > Cystic Fibrosis (CF) Chloride Sweat Test Print A A A ... It Is A chloride sweat test helps diagnose cystic fibrosis (CF) , an inherited disorder that makes kids sick ...

  17. 21 CFR 184.1426 - Magnesium chloride.

    Science.gov (United States)

    2010-04-01

    ... mineral bischofite. It is prepared by dissolving magnesium oxide, hydroxide, or carbonate in aqueous... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Magnesium chloride. 184.1426 Section 184.1426 Food... Specific Substances Affirmed as GRAS § 184.1426 Magnesium chloride. (a) Magnesium chloride (MgC12·6H2O,...

  18. 75 FR 33824 - Barium Chloride From China

    Science.gov (United States)

    2010-06-15

    ... COMMISSION Barium Chloride From China Determination On the basis of the record\\1\\ developed in the subject... order on barium chloride from China would be likely to lead to continuation or recurrence of material... Barium Chloride from China: Investigation No. 731-TA-149 (Third Review). By order of the...

  19. 75 FR 19657 - Barium Chloride From China

    Science.gov (United States)

    2010-04-15

    ... COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Notice of... chloride from China. SUMMARY: The Commission hereby gives notice that it will proceed with a full review... revocation of the antidumping duty order on barium chloride from China would be likely to lead...

  20. 21 CFR 172.180 - Stannous chloride.

    Science.gov (United States)

    2010-04-01

    ... Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely used for color... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

  1. 21 CFR 582.5446 - Manganese chloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  2. Meaningful Clusters

    Energy Technology Data Exchange (ETDEWEB)

    Sanfilippo, Antonio P.; Calapristi, Augustin J.; Crow, Vernon L.; Hetzler, Elizabeth G.; Turner, Alan E.

    2004-05-26

    We present an approach to the disambiguation of cluster labels that capitalizes on the notion of semantic similarity to assign WordNet senses to cluster labels. The approach provides interesting insights on how document clustering can provide the basis for developing a novel approach to word sense disambiguation.

  3. Preparation of semisynthetic (+)-tubocurarine chloride.

    Science.gov (United States)

    Naghaway, J; Soine, T O

    1979-05-01

    Semisynthetic (+)-tubocurarine chloride (II) was prepared by monoquaternization of (+)-tubocurine. The method involved treating (+)-tubocurine with a 0.5 M equivalent of hydrochloric acid prior to quaternization with methyl iodide, followed by neutralization and iodide-chloride ion-exchange. Column chromatography and crystallization procedures were utilized for pure semisynthetic II preparation. The neuromuscular junction blocking activities of the semisynthetic and commercial II were determined by the in vivo cat hypoglossal nerve-tongue muscle preparation. No delectable differences among physical constants, spectral data, and neuromuscular junction blocking activities were noted between the commercial product and the semisynthetic II. This result substantiates the chemical and biological data for the well-accepted new formula for II. The unexplained M + n14 mass spectral peaks shown by the curare-type bases are characteristic of the molecular species rather than a result of contaminants.

  4. Oxomemazine hydro­chloride

    OpenAIRE

    Siddegowda, M. S.; Butcher, Ray J.; Mehmet Akkurt; Yathirajan, H.S.; Ramesh, A. R.

    2011-01-01

    In the title compound [systematic name: 3-(5,5-dioxophenothiazin-10-yl)-N,N,2-trimethylpropanaminium chloride], C18H23N2O2S+·Cl−, the dihedral angle between the two outer aromatic rings of the phenothiazine unit is 30.5 (2)°. In the crystal, the components are linked by N—H...Cl and C—H...Cl hydrogen bonds and C—H...π interactions.

  5. Shock compression of polyvinyl chloride

    Science.gov (United States)

    Neogi, Anupam; Mitra, Nilanjan

    2016-04-01

    This study presents shock compression simulation of atactic polyvinyl chloride (PVC) using ab-initio and classical molecular dynamics. The manuscript also identifies the limits of applicability of classical molecular dynamics based shock compression simulation for PVC. The mechanism of bond dissociation under shock loading and its progression is demonstrated in this manuscript using the density functional theory based molecular dynamics simulations. The rate of dissociation of different bonds at different shock velocities is also presented in this manuscript.

  6. Cluster Lenses

    CERN Document Server

    Kneib, Jean-Paul; 10.1007/s00159-011-0047-3

    2012-01-01

    Clusters of galaxies are the most recently assembled, massive, bound structures in the Universe. As predicted by General Relativity, given their masses, clusters strongly deform space-time in their vicinity. Clusters act as some of the most powerful gravitational lenses in the Universe. Light rays traversing through clusters from distant sources are hence deflected, and the resulting images of these distant objects therefore appear distorted and magnified. Lensing by clusters occurs in two regimes, each with unique observational signatures. The strong lensing regime is characterized by effects readily seen by eye, namely, the production of giant arcs, multiple-images, and arclets. The weak lensing regime is characterized by small deformations in the shapes of background galaxies only detectable statistically. Cluster lenses have been exploited successfully to address several important current questions in cosmology: (i) the study of the lens(es) - understanding cluster mass distributions and issues pertaining...

  7. Salt, chloride, bleach, and innate host defense.

    Science.gov (United States)

    Wang, Guoshun; Nauseef, William M

    2015-08-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense.

  8. Salt, chloride, bleach, and innate host defense

    Science.gov (United States)

    Wang, Guoshun; Nauseef, William M.

    2015-01-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense. PMID:26048979

  9. Developing chloride resisting concrete using PFA

    Energy Technology Data Exchange (ETDEWEB)

    Dhir, R.K.; El-Mohr, M.A.K.; Dyer, T.D. [Univ. of Dundee (United Kingdom). Dept. of Civil Engineering

    1997-11-01

    PFA concrete mixes were designed to optimize resistance to chloride ingress. Chloride binding capacity, intrinsic permeability and their concomitant influence on the coefficient of chloride diffusion have been investigated. PFA replacements up to 67% and exposure concentrations of 0.1, 0.5, 1.0 and 5.0 mole/liter were used. Chloride binding capacity was found to increase with increasing PFA replacement up to 50% and to then decline. It increased with chloride exposure concentration as well as water/binder ratio. The coefficient of chloride diffusion of concrete samples was found to be dependent on both the intrinsic permeability of the concrete and the ability of its cement matrix to bind chlorides.

  10. Data Clustering

    Science.gov (United States)

    Wagstaff, Kiri L.

    2012-03-01

    On obtaining a new data set, the researcher is immediately faced with the challenge of obtaining a high-level understanding from the observations. What does a typical item look like? What are the dominant trends? How many distinct groups are included in the data set, and how is each one characterized? Which observable values are common, and which rarely occur? Which items stand out as anomalies or outliers from the rest of the data? This challenge is exacerbated by the steady growth in data set size [11] as new instruments push into new frontiers of parameter space, via improvements in temporal, spatial, and spectral resolution, or by the desire to "fuse" observations from different modalities and instruments into a larger-picture understanding of the same underlying phenomenon. Data clustering algorithms provide a variety of solutions for this task. They can generate summaries, locate outliers, compress data, identify dense or sparse regions of feature space, and build data models. It is useful to note up front that "clusters" in this context refer to groups of items within some descriptive feature space, not (necessarily) to "galaxy clusters" which are dense regions in physical space. The goal of this chapter is to survey a variety of data clustering methods, with an eye toward their applicability to astronomical data analysis. In addition to improving the individual researcher’s understanding of a given data set, clustering has led directly to scientific advances, such as the discovery of new subclasses of stars [14] and gamma-ray bursts (GRBs) [38]. All clustering algorithms seek to identify groups within a data set that reflect some observed, quantifiable structure. Clustering is traditionally an unsupervised approach to data analysis, in the sense that it operates without any direct guidance about which items should be assigned to which clusters. There has been a recent trend in the clustering literature toward supporting semisupervised or constrained

  11. Hydrolysis of cupric chloride in aqueous ammoniacal ammonium chloride solutions

    Directory of Open Access Journals (Sweden)

    Limpo, J. L.

    1995-06-01

    Full Text Available Cupric solubility in the CuCl2-NH4Cl-NH3-H2O system for chloride concentrations lower than 4 molal in the temperature range 25-60 °C was studied. The experimental results show that for chloride concentration between 3.0 and 1.0 molal the cupric solubility is determined by the solubility of the cupric hydroxychloride Cu(OH1.5Cl0.5. For a chloride concentration value of 4.0 molal, there are two cupric compounds, the hydroxychloride Cu(OH1.5Cl0.5 or the diammine chloride Cu(NH32Cl2, on which the solubility of Cu(II depends, according to the temperature and the value of the ratio [NH3]Total/[Cu]Total.

    Se estudia la solubilidad del Cu(II en el sistema CuCl2-NH4Cl-NH3-H2O para concentraciones de cloruro inferiores a 4 molal en el intervalo de temperaturas 25-60 °C. Los resultados experimentales muestran que, para concentraciones de cloruros comprendidas entre 3,0 y 1,0 molal, la solubilidad cúprica viene determinada por la solubilidad del hidroxicloruro cúprico, Cu(OH1.5Cl0.5. Para concentraciones de cloruro 4,0 molal, existen dos compuestos cúpricos, el hidroxicloruro, Cu(OH1.5Cl0.5 o el cloruro de diamina, Cu(NH32Cl2, de los que, de acuerdo con la temperatura y con el valor de la relación [NH3]Total/[Cu]Total depende la solubilidad del Cu(II.

  12. Nanometer-Thick Gold on Silicon as a Proxy for Single-Crystal Gold for the Electrodeposition of Epitaxial Cuprous Oxide Thin Films.

    Science.gov (United States)

    Switzer, Jay A; Hill, James C; Mahenderkar, Naveen K; Liu, Ying-Chau

    2016-06-22

    Single-crystal Au is an excellent substrate for electrochemical epitaxial growth due to its chemical inertness, but the high cost of bulk Au single crystals prohibits their use in practical applications. Here, we show that ultrathin epitaxial films of Au electrodeposited onto Si(111), Si(100), and Si(110) wafers can serve as an inexpensive proxy for bulk single-crystal Au for the deposition of epitaxial films of cuprous oxide (Cu2O). The Au films range in thickness from 7.7 nm for a film deposited for 5 min to 28.3 nm for a film deposited for 30 min. The film thicknesses are measured by low-angle X-ray reflectivity and X-ray Laue oscillations. High-resolution TEM shows that there is not an interfacial SiOx layer between the Si and Au. The Au films deposited on the Si(111) substrates are smoother and have lower mosaic spread than those deposited onto Si(100) and Si(110). The mosaic spread of the Au(111) layer on Si(111) is only 0.15° for a 28.3 nm thick film. Au films deposited onto degenerate Si(111) exhibit ohmic behavior, whereas Au films deposited onto n-type Si(111) with a resistivity of 1.15 Ω·cm are rectifying with a barrier height of 0.85 eV. The Au and the Cu2O follow the out-of-plane and in-plane orientations of the Si substrates, as determined by X-ray pole figures. The Au and Cu2O films deposited on Si(100) and Si(110) are both twinned. The films grown on Si(100) have twins with a [221] orientation, and the films grown on Si(110) have twins with a [411] orientation. An interface model is proposed for all Si orientations, in which the -24.9% mismatch for the Au/Si system is reduced to only +0.13% by a coincident site lattice in which 4 unit meshes of Au coincide with 3 unit meshes of Si. Although this study only considers the deposition of epitaxial Cu2O films on electrodeposited Au/Si, the thin Au films should serve as high-quality substrates for the deposition of a wide variety of epitaxial materials.

  13. Cluster Chemistry

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    @@ Cansisting of eight scientists from the State Key Laboratory of Physical Chemistry of Solid Surfaces and Xiamen University, this creative research group is devoted to the research of cluster chemistry and creation of nanomaterials.After three-year hard work, the group scored a series of encouraging progresses in synthesis of clusters with special structures, including novel fullerenes, fullerene-like metal cluster compounds as well as other related nanomaterials, and their properties study.

  14. Oxomemazine hydro­chloride

    Science.gov (United States)

    Siddegowda, M. S.; Butcher, Ray J.; Akkurt, Mehmet; Yathirajan, H. S.; Ramesh, A. R.

    2011-01-01

    In the title compound [systematic name: 3-(5,5-dioxo­phen­othia­zin-10-yl)-N,N,2-trimethyl­propanaminium chloride], C18H23N2O2S+·Cl−, the dihedral angle between the two outer aromatic rings of the phenothia­zine unit is 30.5 (2)°. In the crystal, the components are linked by N—H⋯Cl and C—H⋯Cl hydrogen bonds and C—H⋯π inter­actions. PMID:22090928

  15. Simple chloride sensors for continuous groundwater monitoring

    DEFF Research Database (Denmark)

    Thorn, Paul; Mortensen, John

    2012-01-01

    The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used...... in continuous application. This study looks at the development of a simple, inexpensive chloride electrode, and evaluates its performance under continuous use, both in the laboratory and in a field test in a monitoring well. The results from the study showed a consistent response to changing chloride...... sensor remained responsive even at low chloride concentrations, where the conductivity electrode was no longer responding to changing chloride levels. With the results, it is believed that the simple chloride sensor could be used for continuous monitoring of groundwater quality....

  16. Clustered regression with unknown clusters

    CERN Document Server

    Barman, Kishor

    2011-01-01

    We consider a collection of prediction experiments, which are clustered in the sense that groups of experiments ex- hibit similar relationship between the predictor and response variables. The experiment clusters as well as the regres- sion relationships are unknown. The regression relation- ships define the experiment clusters, and in general, the predictor and response variables may not exhibit any clus- tering. We call this prediction problem clustered regres- sion with unknown clusters (CRUC) and in this paper we focus on linear regression. We study and compare several methods for CRUC, demonstrate their applicability to the Yahoo Learning-to-rank Challenge (YLRC) dataset, and in- vestigate an associated mathematical model. CRUC is at the crossroads of many prior works and we study several prediction algorithms with diverse origins: an adaptation of the expectation-maximization algorithm, an approach in- spired by K-means clustering, the singular value threshold- ing approach to matrix rank minimization u...

  17. Chloride Ion Critical Content in Reinforced Concrete

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Chloride ion critical content was studied under soaking and cycle of dry and wet conditions,with three electrochemical nondestructive measuring techniques, i e, half-cell potential, A C impedance, and time potential. The experimental results show that chloride ion critical content is primarily determined by the water cement ratio, while for the same concrete mixture the chloride ion critical content in soaking conditions is larger than that in a cycle of dry and wet conditions.

  18. Subspace clustering through attribute clustering

    Institute of Scientific and Technical Information of China (English)

    Kun NIU; Shubo ZHANG; Junliang CHEN

    2008-01-01

    Many recently proposed subspace clustering methods suffer from two severe problems. First, the algorithms typically scale exponentially with the data dimensionality or the subspace dimensionality of clusters. Second, the clustering results are often sensitive to input parameters. In this paper, a fast algorithm of subspace clustering using attribute clustering is proposed to over-come these limitations. This algorithm first filters out redundant attributes by computing the Gini coefficient. To evaluate the correlation of every two non-redundant attributes, the relation matrix of non-redundant attributes is constructed based on the relation function of two dimensional united Gini coefficients. After applying an overlapping clustering algorithm on the relation matrix, the candidate of all interesting subspaces is achieved. Finally, all subspace clusters can be derived by clustering on interesting subspaces. Experiments on both synthesis and real datasets show that the new algorithm not only achieves a significant gain of runtime and quality to find subspace clusters, but also is insensitive to input parameters.

  19. Chloride ingress in cement paste and mortar

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, O.M.; Hansen, P.F.; Coats, A.M.; Glasser, F.P.

    1999-09-01

    In this paper chloride ingress in cement paste and mortar is followed by electron probe microanalysis. The influence of several paste and exposure parameters on chloride ingress are examined (e.g., water-cement ratio, silica fume addition, exposure time, and temperature). The measurements are modelled on Fick's law modified by a term for chloride binding. Inclusion of chloride binding significantly improves the profile shape of the modelled ingress profiles. The presence of fine aggregate and formation of interfacial transition zones at paste-aggregate boundaries does not significantly affect diffusion rates.

  20. Green process to recover magnesium chloride from residue solution of potassium chloride production plant

    Institute of Scientific and Technical Information of China (English)

    Lin WANG; Yunliang HE; Yanfei WANG; Ying BAO; Jingkang WANG

    2008-01-01

    The green process to recover magnesium chlor-ide from the residue solution of a potassium chloride pro-duction plant, which comes from the leach solution of a potash mine in Laos, is designed and optimized. The res-idue solution contains magnesium chloride above 25 wt-%, potassium chloride and sodium chloride together below 5 wt-% and a few other ions such as Br-, SO2-4and Ca2+. The recovery process contains two steps: the previous impurity removal operation and the two-stage evapora-tion-cooling crystallization procedure to produce magnes-ium chloride. The crystallized impurity carnallite obtained from the first step is recycled to the potassium chloride plant to recover the potassium salt. The developed process is a zero discharge one and thus fulfills the requirements for green chemical industrial production. The produced magnesium chloride is up to industrial criteria.

  1. ENVIRONMENTAL EXPOSURE TO VINYL CHLORIDE

    Directory of Open Access Journals (Sweden)

    Henryka Langauer-Lewowicka

    2010-09-01

    Full Text Available Vinyl chloride (VC monomer is a wellknown carcinogenic and mutagenic substance causes liver damages, angiosarcoma of the liver, acro – osteolysis, sclerodermalike changes in workers chronically exposed to this gas. There are following VC emitors to the environment: VC production plants, polymerization facilities and planes where polyvinyl products are fabricated. Because of that, the general population is coming into VC contact through polluted air, food and water. VC concentration in all mentioned sites is very low, often not detectable. There was found any health risk for the general population. The VC air concentration in the vicinity to antropogenic emitors is always higher. Such a situation may causes undesirable health effect for residents living in the neighbourhood. Epidemiological studies are performed to detect the adverse VC effect in selected cohorts. Non of the study did not confirmed cases of angiosarcoma among residents living near a vinyl chloride sites. VC production is growing permanently, so VC emission will be higher. Because of that health monitoring of general population and especially of selected groups seems to be necessary in the future.

  2. Comparing polyaluminum chloride and ferric chloride for antimony removal.

    Science.gov (United States)

    Kang, Meea; Kamei, Tasuku; Magara, Yasumoto

    2003-10-01

    Antimony has been one of the contaminants required to be regulated, however, only limited information has been collected to date regarding antimony removal by polyaluminium chloride (PACl) and ferric chloride (FC). Accordingly, the possible use of coagulation by PACl or FC for antimony removal was investigated. Jar tests were used to determine the effects of solution pH, coagulant dosage, and pre-chlorination on the removal of various antimony species. Although high-efficiency antimony removal by aluminum coagulation has been expected because antimony is similar to arsenic in that both antimony and arsenic are a kind of metalloid in group V of the periodic chart, this study indicated: (1) removal density (arsenic or antimony removed per mg coagulant) for antimony by PACl was about one forty-fifth as low as observed for As(V); (2) although the removal of both Sb(III) and Sb(V) by coagulation with FC was much higher than that of PACl, a high coagulant dose of 10.5mg of FeL(-1) at optimal pH of 5.0 was still not sufficient to meet the standard antimony level of 2 microg as SbL(-1) for drinking water when around 6 microg as SbL(-1) were initially present. Consequently, investigation of a more appropriate treatment process is necessary to develop economical Sb reduction; (3) although previous studies concluded that As(V) is more effectively removed than As(III), this study showed that the removal of Sb(III) by coagulation with FC was much more pronounced than that of Sb(V); (4) oxidation of Sb(III) with chlorine decreased the ability of FC to remove antimony. Accordingly, natural water containing Sb(III) under anoxic condition should be coagulated without pre-oxidation.

  3. Electrochemical Behavior of Copper in Thionyl Chloride Solutions.

    Science.gov (United States)

    1980-12-01

    lithium - thionyl chloride batteries . Thionyl chloride is known *3 to react...electrolyte for lithium - thionyl chloride batteries . 8R. K. McAlpine and B. A. Soule, Prescott and Johnson’s Qualitative Chemical Analysis, D. Van...black carbon electrodes, cupric chloride appears to be a useful cathode additive for lithium - thionyl chloride batteries . Preliminary results2l

  4. Cluster editing

    DEFF Research Database (Denmark)

    Böcker, S.; Baumbach, Jan

    2013-01-01

    . The problem has been the inspiration for numerous algorithms in bioinformatics, aiming at clustering entities such as genes, proteins, phenotypes, or patients. In this paper, we review exact and heuristic methods that have been proposed for the Cluster Editing problem, and also applications......The Cluster Editing problem asks to transform a graph into a disjoint union of cliques using a minimum number of edge modifications. Although the problem has been proven NP-complete several times, it has nevertheless attracted much research both from the theoretical and the applied side...

  5. Weighted Clustering

    CERN Document Server

    Ackerman, Margareta; Branzei, Simina; Loker, David

    2011-01-01

    In this paper we investigate clustering in the weighted setting, in which every data point is assigned a real valued weight. We conduct a theoretical analysis on the influence of weighted data on standard clustering algorithms in each of the partitional and hierarchical settings, characterising the precise conditions under which such algorithms react to weights, and classifying clustering methods into three broad categories: weight-responsive, weight-considering, and weight-robust. Our analysis raises several interesting questions and can be directly mapped to the classical unweighted setting.

  6. Cluster analysis

    CERN Document Server

    Everitt, Brian S; Leese, Morven; Stahl, Daniel

    2011-01-01

    Cluster analysis comprises a range of methods for classifying multivariate data into subgroups. By organizing multivariate data into such subgroups, clustering can help reveal the characteristics of any structure or patterns present. These techniques have proven useful in a wide range of areas such as medicine, psychology, market research and bioinformatics.This fifth edition of the highly successful Cluster Analysis includes coverage of the latest developments in the field and a new chapter dealing with finite mixture models for structured data.Real life examples are used throughout to demons

  7. Treatment of port-wine stains by photodynamic therapy of cuprous bromide laser%溴化亚铜激光光动力学疗法治疗鲜红斑痣

    Institute of Scientific and Technical Information of China (English)

    唐建民; 刘爱琴; 陈祖林; 杨名娟

    2000-01-01

    运用溴化亚铜激光光动力学疗法治疗鲜红斑痣296例,红斑完全消退185例(62.5%),部分消退111例(37.5%),无效0,并发疤痕15例,证实该疗法疗效确切同时仍需完善。%296 Cases of port-wine stains(PWS) were treated by photodynamic therapy(PDT) of cuprous bromide laser,including which 185 cases (62.5%)gained the result of thorough remission,111 cases (37.5%)gained the result of partial remission and 15 cases complicated with scar formation.PDT is proved to be an effective therapy for PWS while it also needs improving.

  8. Reliability-Based Planning of Chloride Measurements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Engelund, S.

    1996-01-01

    on measurements of the chloride content obtained from the given structure. In the present paper optimal planning of measurements of the chloride content in reinforced concrete structures is considered. It is shown how optimal experimental plans can be obtained using FORM-analysis. Bayesian statistics are used...

  9. Chronopotentiometric chloride sensing using transition time measurement

    NARCIS (Netherlands)

    Abbas, Y.; Graaf, de D.B.; Olthuis, W.; Berg, van den A.

    2013-01-01

    Detection of chloride ions is crucial to accurately access the concrete structure durability[1]. The existing electrochemical method of chloride ions detection in concrete, potentiometry[1], is not suitable for in-situ measurement due to the long term stability issue of conventional reference electr

  10. Chloride binding site of neurotransmitter sodium symporters

    DEFF Research Database (Denmark)

    Kantcheva, Adriana Krassimirova; Quick, Matthias; Shi, Lei

    2013-01-01

    Neurotransmitter:sodium symporters (NSSs) play a critical role in signaling by reuptake of neurotransmitters. Eukaryotic NSSs are chloride-dependent, whereas prokaryotic NSS homologs like LeuT are chloride-independent but contain an acidic residue (Glu290 in LeuT) at a site where eukaryotic NSSs...

  11. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.

    1999-01-01

    In this paper chloride ingress in cement paste and mortar is followed by electron probe microanalysis. The influence of several paste and exposure parameters on chloride ingress are examined (e.g., water-cement ratio, silica fume addition, exposure time, and temperature), The measurements...

  12. 29 CFR 1915.1017 - Vinyl chloride.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Vinyl chloride. 1915.1017 Section 1915.1017 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1915.1017 Vinyl chloride. Note: The requirements applicable to shipyard employment under this...

  13. 29 CFR 1926.1117 - Vinyl chloride.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Vinyl chloride. 1926.1117 Section 1926.1117 Labor... (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Toxic and Hazardous Substances § 1926.1117 Vinyl chloride. Note: The requirements applicable to construction work under this section are identical to...

  14. Chemische contaminanten in diervoeder additief Choline Chloride

    NARCIS (Netherlands)

    Traag, W.A.; Hoogenboom, L.A.P.; Jong, de J.; Egmond, van H.J.; Dam, ten G.

    2010-01-01

    Dit briefrapport beschrijft de resultaten van een onderzoek naar chemische contaminanten in Choline Chloride. De doelstellingen waren: 1) Inzicht te verkrijgen in het voorkomen van (gebromeerde) vlamvertragers en broomdioxines in het diervoederadditief Choline Chloride en het, op basis van de result

  15. Ageing effect of chloride diffusion coefficient

    NARCIS (Netherlands)

    Polder, R.B.

    2006-01-01

    Most of the currently used models to predict chloride ingress a constant diffusion coefficient over time. However, a reduction of the diffusion coefficient over time, is ob-served at specimens that are exposed to chlorides. This reduction of the diffusion coefficient is expressed with the ageing coe

  16. Fuzzy Clustering

    DEFF Research Database (Denmark)

    Berks, G.; Keyserlingk, Diedrich Graf von; Jantzen, Jan

    2000-01-01

    A symptom is a condition indicating the presence of a disease, especially, when regarded as an aid in diagnosis.Symptoms are the smallest units indicating the existence of a disease. A syndrome on the other hand is an aggregate, set or cluster of concurrent symptoms which together indicate...... and clustering are the basic concerns in medicine. Classification depends on definitions of the classes and their required degree of participant of the elements in the cases' symptoms. In medicine imprecise conditions are the rule and therefore fuzzy methods are much more suitable than crisp ones. Fuzzy c......-mean clustering is an easy and well improved tool, which has been applied in many medical fields. We used c-mean fuzzy clustering after feature extraction from an aphasia database. Factor analysis was applied on a correlation matrix of 26 symptoms of language disorders and led to five factors. The factors...

  17. Chloride Transport in Undersea Concrete Tunnel

    Directory of Open Access Journals (Sweden)

    Yuanzhu Zhang

    2016-01-01

    Full Text Available Based on water penetration in unsaturated concrete of underwater tunnel, a diffusion-advection theoretical model of chloride in undersea concrete tunnel was proposed. The basic parameters including porosity, saturated hydraulic conductivity, chloride diffusion coefficient, initial water saturation, and moisture retention function of concrete specimens with two water-binder ratios were determined through lab-scale experiments. The variation of chloride concentration with pressuring time, location, solution concentration, initial saturation, hydraulic pressure, and water-binder ratio was investigated through chloride transport tests under external water pressure. In addition, the change and distribution of chloride concentration of isothermal horizontal flow were numerically analyzed using TOUGH2 software. The results show that chloride transport in unsaturated concrete under external water pressure is a combined effect of diffusion and advection instead of diffusion. Chloride concentration increased with increasing solution concentration for diffusion and increased with an increase in water pressure and a decrease in initial saturation for advection. The dominant driving force converted with time and saturation. When predicting the service life of undersea concrete tunnel, it is suggested that advection is taken into consideration; otherwise the durability tends to be unsafe.

  18. Cluster forcing

    DEFF Research Database (Denmark)

    Christensen, Thomas Budde

    .g. sustainability or quality of life. The purpose of this paper is to explore how and to what extent public sector interventions that aim at forcing cluster development in industries can support sustainable development as defined in the Brundtland tradition and more recently elaborated in such concepts as eco......, Portugal and New Zealand have adopted the concept. Public sector interventions that aim to support cluster development in industries most often focus upon economic policy goals such as enhanced employment and improved productivity, but rarely emphasise broader societal policy goals relating to e...... to the automotive sector in Wales. Specifically, the paper evaluates the "Accelerates" programme initiated by the Welsh Development Agency and elaborates on how and to what extent the Accelerate programme supports the development of a sustainable automotive industry cluster. The Accelerate programme was set up...

  19. Reliability-Based Planning of Chloride Measurements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Engelund, S.

    1996-01-01

    on measurements of the chloride content obtained from the given structure. In the present paper optimal planning of measurements of the chloride content in reinforced concrete structures is considered. It is shown how optimal experimental plans can be obtained using FORM-analysis. Bayesian statistics are used......In reinforced concrete structures corrosion is initiated when the chloride concentration around the reinforcement exceeds a threshold value. If corrosion starts then expensive repairs can be necessary. The estimation of the probability that corrosion has been initiated in a given structure is based...

  20. Chloride Ingress into Concrete under Water Pressure

    OpenAIRE

    Lund, Mia Schou; Sander, Lotte Braad; Grelk, Bent; Hansen, Kurt Kielsgaard

    2011-01-01

    The chloride ingress into concrete under water pressures of 100 kPa and 800 kPa have been investigated by experiments. The specimens were exposed to a 10% NaCl solution and water mixture. For the concrete having w/c = 0.35 the experimental results show the chloride diffusion coefficient at 800 kPa (~8 atm.) is 12 times greater than at 100 kPa (~1 atm.). For w/c = 0.45 and w/c = 0.55 the chloride diffusion coefficients are 7 and 3 times greater. This means that a change in pressure highly infl...

  1. Catastrophic event modeling. [lithium thionyl chloride batteries

    Science.gov (United States)

    Frank, H. A.

    1981-01-01

    A mathematical model for the catastrophic failures (venting or explosion of the cell) in lithium thionyl chloride batteries is presented. The phenomenology of the various processes leading to cell failure is reviewed.

  2. Chloride Ingress into Concrete under Water Pressure

    DEFF Research Database (Denmark)

    Lund, Mia Schou; Sander, Lotte Braad; Grelk, Bent

    2011-01-01

    Pa (~8 atm.) is 12 times greater than at 100 kPa (~1 atm.). For w/c = 0.45 and w/c = 0.55 the chloride diffusion coefficients are 7 and 3 times greater. This means that a change in pressure highly influences the chloride ingress into the concrete and thereby the life length models for concrete structures.......The chloride ingress into concrete under water pressures of 100 kPa and 800 kPa have been investigated by experiments. The specimens were exposed to a 10% NaCl solution and water mixture. For the concrete having w/c = 0.35 the experimental results show the chloride diffusion coefficient at 800 k...

  3. Corneal Neurotoxicity Due to Topical Benzalkonium Chloride

    OpenAIRE

    Sarkar, Joy; Chaudhary, Shweta; Namavari, Abed; Ozturk, Okan; Chang, Jin-Hong; Yco, Lisette; Sonawane, Snehal; Khanolkar, Vishakha; Hallak, Joelle; Jain, Sandeep

    2012-01-01

    Topical application of benzalkonium chloride (BAK) to the eye causes dose-related corneal neurotoxicity. Corneal inflammation and reduction in aqueous tear production accompany neurotoxicity. Cessation of BAK treatment leads to recovery of corneal nerve density.

  4. Surface adsorption in strontium chloride ammines

    DEFF Research Database (Denmark)

    Ammitzbøll, Andreas L.; Lysgaard, Steen; Klukowska, Agata

    2013-01-01

    An adsorbed state and its implications on the ab- and desorption kinetics of ammonia in strontium chloride ammine is identified using a combination of ammonia absorption measurements, thermogravimetric analysis, and density functional theory calculations. During thermogravimetric analysis, ammoni...

  5. 75 FR 20625 - Barium Chloride From China

    Science.gov (United States)

    2010-04-20

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Revised schedule for the subject review. DATES: Effective Date: April 9, 2010. FOR FURTHER INFORMATION CONTACT:...

  6. Qualitative Determination of Nitrate with Triphenylbenzylphosphonium Chloride.

    Science.gov (United States)

    Berry, Donna A.; Cole, Jerry J.

    1984-01-01

    Discusses two procedures for the identification of nitrate, the standard test ("Brown Ring" test) and a new procedure using triphenylbenzylphosphonium chloride (TPBPC). Effectiveness of both procedures is compared, with the TPBPC test proving to be more sensitive and accurate. (JM)

  7. Cluster forcing

    DEFF Research Database (Denmark)

    Christensen, Thomas Budde

    The cluster theory attributed to Michael Porter has significantly influenced industrial policies in countries across Europe and North America since the beginning of the 1990s. Institutions such as the EU, OECD and the World Bank and governments in countries such as the UK, France, The Netherlands...

  8. Telomerization of Vinyl Chloride with Chloroform Initiated by Ferrous Chloride-Dimethylacetamide under Ultrasonic Conditions

    Directory of Open Access Journals (Sweden)

    Hua Qian

    2015-01-01

    Full Text Available Telomerization of vinyl chloride with chloroform was investigated using ferrous chloride-dimethylacetamide system, and 42.1% yield, more than four times the one reported before, was achieved. The addition of ultrasound further improved the reaction and yield was raised to 51.9% with trace byproducts at highly reduced reaction time and temperature. Ferrous chloride-dimethylacetamide under ultrasonic irradiation acts as a very efficient catalyst system for the 1 : 1 telomerization.

  9. The kinetics of the hydrogen chloride oxidation

    Directory of Open Access Journals (Sweden)

    Gonzalez Martinez Isai

    2013-01-01

    Full Text Available Hydrogen chloride (HCl oxidation has been investigated on technical membrane electrode assemblies in a cyclone flow cell. Influence of Nafion loading, temperature and hydrogen chloride mole fraction in the gas phase has been studied. The apparent kinetic parameters like reaction order with respect to HCl, Tafel slope and activation energy have been determined from polarization data. The apparent kinetic parameters suggest that the recombination of adsorbed Cl intermediate is the rate determining step.

  10. Cesium chloride-induced torsades de pointes

    OpenAIRE

    Wiens, Matthew; Gordon, Wendy; Baulcomb, Daisy; Mattman, Andre; Mock, Tom; Brown, Robert

    2009-01-01

    The chloride salt of cesium, a group 1A element, is gaining popularity as an alternative treatment of advanced cancers. Cesium chloride has primarily been used in cardiovascular research for arrhythmogenesis in animals because of its potassium-blocking effects. The present report describes a 45-year-old woman with metastatic breast cancer who experienced repeated episodes of torsades de pointes polymorphic ventricular tachycardia after several months of oral cesium therapy. There was a clear ...

  11. Effect of Chloride Type on Penetration of Chloride Ions in Concrete

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The influence of chloride type on the diffusivity of chloride ions in concrete was studied by experiment. The result shows that the glectric resistance of concrete and the chloride diffusion coefficient are influenced by chloride type. For the same water/cement ratio (W/C), the diffusion coefficient D in KCl solution is larger than that in NaCl solution; however, the concrete resistance in KCl solution is smaller than that in NaCl solution. The experimental result is analyzed with theory of diffusion.

  12. Influence of Chloride-Ion Adsorption Agent on Chloride Ions in Concrete and Mortar

    Directory of Open Access Journals (Sweden)

    Gai-Fei Peng

    2014-04-01

    Full Text Available The influence of a chloride-ion adsorption agent (Cl agent in short, composed of zeolite, calcium aluminate hydrate and calcium nitrite, on the ingress of chloride ions into concrete and mortar has been experimentally studied. The permeability of concrete was measured, and the chloride ion content in mortar was tested. The experimental results reveal that the Cl agent could adsorb chloride ions effectively, which had penetrated into concrete and mortar. When the Cl agent was used at a dosage of 6% by mass of cementitious materials in mortar, the resistance to the penetration of chloride ions could be improved greatly, which was more pronounced when a combination of the Cl agent and fly ash or slag was employed. Such an effect is not the result of the low permeability of the mortar, but might be a result of the interaction between the Cl agent and the chloride ions penetrated into the mortar. There are two possible mechanisms for the interaction between the Cl agent and chloride ion ingress. One is the reaction between calcium aluminate hydrate in the Cl agent and chloride ions to form Friedel’s salt, and the other one is that calcium aluminate hydrate reacts with calcium nitrite to form AFm during the early-age hydration of mortar and later the NO2− in AFm is replaced by chloride ions, which then penetrate into the mortar, also forming Friedel’s salt. More research is needed to confirm the mechanisms.

  13. Presence of Li Clusters in Molten LiCl-Li

    Science.gov (United States)

    Merwin, Augustus; Phillips, William C.; Williamson, Mark A.; Willit, James L.; Motsegood, Perry N.; Chidambaram, Dev

    2016-05-01

    Molten mixtures of lithium chloride and metallic lithium are of significant interest in various metal oxide reduction processes. These solutions have been reported to exhibit seemingly anomalous physical characteristics that lack a comprehensive explanation. In the current work, the physical chemistry of molten solutions of lithium chloride and metallic lithium, with and without lithium oxide, was investigated using in situ Raman spectroscopy. The Raman spectra obtained from these solutions were in agreement with the previously reported spectrum of the lithium cluster, Li8. This observation is indicative of a nanofluid type colloidal suspension of Li8 in a molten salt matrix. It is suggested that the formation and suspension of lithium clusters in lithium chloride is the cause of various phenomena exhibited by these solutions that were previously unexplainable.

  14. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  15. Quotients of cluster categories

    OpenAIRE

    Jorgensen, Peter

    2007-01-01

    Higher cluster categories were recently introduced as a generalization of cluster categories. This paper shows that in Dynkin types A and D, half of all higher cluster categories are actually just quotients of cluster categories. The other half can be obtained as quotients of 2-cluster categories, the "lowest" type of higher cluster categories. Hence, in Dynkin types A and D, all higher cluster phenomena are implicit in cluster categories and 2-cluster categories. In contrast, the same is not...

  16. Regional Innovation Clusters

    Data.gov (United States)

    Small Business Administration — The Regional Innovation Clusters serve a diverse group of sectors and geographies. Three of the initial pilot clusters, termed Advanced Defense Technology clusters,...

  17. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2009-09-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the CMB approach. Furthermore, intensive vegetation clearance for agriculture, for example during the European settlement in many coastal areas of Australia, may have perturbed catchment chloride balance conditions for appropriate use in CMB applications. In order to deal with these issues, a high resolution chloride deposition map in the coastal region is needed. In this study, we examined geographic, orographic, and atmospheric factors influencing chloride deposition in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia, using partial correlation and regression analyses. The results indicate that coastal distance, and terrain aspect and slope are two most significant factors controlling chloride deposition. Coastal distance accounts for 65% spatial variability in chloride deposition, with terrain aspect and slope for 8%. The deposition gradient is about 0.08 gm-2 year-1 km-1 as one progresses inland. The results are incorporated into a published de-trended residual kriging approach (ASOADeK to produce a 1 km×1 km resolution annual chloride deposition map and a bulk precipitation chloride concentration map. The average uncertainty of the deposition map is about 30% in the western MLR, and over 50% in the eastern MLR. The maps will form a very useful basis for examining catchment chloride balances for use in the CMB application in the study area.

  18. A comprehensive probabilistic model of chloride ingress in unsaturated concrete

    OpenAIRE

    Bastidas-Arteaga, Emilio; Chateauneuf, Alaa; Sánchez-Silva, Mauricio; Bressolette, Philippe; Schoefs, Franck

    2011-01-01

    International audience; Corrosion induced by chloride ions has become a critical issue for many reinforced concrete structures. The chloride ingress into concrete has been usually simplified as a diffusion problem where the chloride concentration throughout concrete is estimated analytically. However, this simplified approach has several limitations. For instance, it does not consider chloride ingress by convection which is essential to model chloride penetration in unsaturated conditions as ...

  19. Cluster Radioactivity

    Science.gov (United States)

    Poenaru, Dorin N.; Greiner, Walter

    One of the rare examples of phenomena predicted before experimental discovery, offers the opportunity to introduce fission theory based on the asymmetric two center shell model. The valleys within the potential energy surfaces are due to the shell effects and are clearly showing why cluster radioactivity was mostly detected in parent nuclei leading to a doubly magic lead daughter. Saddle point shapes can be determined by solving an integro-differential equation. Nuclear dynamics allows us to calculate the half-lives. The following cluster decay modes (or heavy particle radioactivities) have been experimentally confirmed: 14C, 20O, 23F, 22,24-26Ne, 28,30Mg, 32,34Si with half-lives in good agreement with predicted values within our analytical superasymmetric fission model. The preformation probability is calculated as the internal barrier penetrability. An universal curve is described and used as an alternative for the estimation of the half-lives. The macroscopic-microscopic method was extended to investigate two-alpha accompanied fission and true ternary fission. The methods developed in nuclear physics are also adapted to study the stability of deposited atomic clusters on the planar surfaces.

  20. 水相中金属铜表面生成亚铜-邻菲罗啉配合物的反应%FORMATION OF BIS ( 1 , 10-PHENANTHROLINE) CUPROUS COMPLEXES ON METALLIC COPPER SURFACE IN AQUEOUS SOLUTION

    Institute of Scientific and Technical Information of China (English)

    聂崇实; 顾亦君; 孙杰

    1996-01-01

    本文研究了零价铜在邻菲罗啉水溶液中的反应.当溶液敞露于空气并存在有机阴离子X-时,例如苯甲酸盐(Bz)、对甲基苯磺酸盐(Ts)等,铜的表面生成了致密的反应产物的薄层,经IR、UV/VIS、MS和元素分析证明了该薄层为相当纯的亚铜的邻菲罗啉配位化合物,结构为[Cu(phen)2]+X-.在乙醇/甲苯混合溶剂中得到了表面反应产物的晶体[Cu(phen)2](CH3C4H6SO3)C2HsOH,并用X-ray测得了结构.本工作表明溶液中的Cu1离子抑制Cu0氧化成Cu1而影响反应层的形成,同时又促进Cu1氧化成Cu1的过程.%The formation of cuprous complex on metallic copper surface in 1,10-phenanthroline (phen) aqueous solution has been investigated as exposed in air and in the presence of common organic anions (X-) such as benzoate (Bz-) and toluene sulphonate (Ts-). The complexes deposited on the surface of metallic copper have been proved to be rather pure cuprous phenanthroline complexes having the structure [Cu(phen)2]X based on the elemental analysis, IR, UV/C2H5OH was determined by X-ray diffraction analysis. The work demonstrated that the Cu1 ion in the reaction solution hindered the process of Cu0 to Cu1 and in the meanwhile accelerated the process of Cu 1 to Cu 1.

  1. Inhibition of nitrite-induced toxicity in channel catfish by calcium chloride and sodium chloride

    Science.gov (United States)

    Tommasso J.R., Wright; Simco, B.A.; Davis, K.B.

    1980-01-01

    Environmental chloride has been shown to inhibit methemoglobin formation in fish, thereby offering a protective effect against nitrite toxicity. Channel catfish (Ictalurus punctatus) were simultaneously exposed to various environmental nitrite and chloride levels (as either CaCl2 or NaCl) in dechlorinated tap water (40 mg/L total hardness, 47 mg/L alkalinity, 4 mg/L chloride, pH = 6.9-7.1, and temperature 21-24°C). Methemoglobin levels in fish simultaneously exposed to 2.5 mg/L nitrite and up to 30 mg/L chloride as either CaCl2 or NaCl were similar but significantly lower than in unprotected fish. Exposure to 10 mg/L nitrite and 60 mg/L chloride resulted in methemoglobin levels similar to those of the controls; most unprotected fish died. Fish exposed to 10 mg/L nitrite had significantly lower methemoglobin levels when protected with 15.0 mg/L chloride as CaCl2 than with NaCl. Fish exposed to nitrite in the presence of 60 mg/L chloride (as either CaCl2 or NaCl) had similar 24-h LC50 values that were significantly elevated above those obtained in the absence of chloride. Calcium had little effect on tolerance to nitrite toxicity in channel catfish in contrast to its large effect reported in steelhead trout (Salmo gairdneri).

  2. Congenital Chloride Diarrhea: Diagnosis by Easy-Accessible Chloride Measurement in Feces

    Directory of Open Access Journals (Sweden)

    C. Gils

    2016-01-01

    Full Text Available Background. Congenital chloride diarrhea (CCD is an autosomal recessive disorder caused by mutations in the genes encoding the intestinal Cl−/HCO3- exchanger and is clinically characterized by watery, profound diarrhea, electrolyte disturbances, and metabolic alkalosis. The CCD diagnosis is based on the clinical symptoms and measurement of high chloride concentration in feces (>90 mmol/L and is confirmed by DNA testing. Untreated CCD is lethal, while long-term clinical outcome improves when treated correctly. Case Presentation. A 27-year-old woman had an emergency caesarian due to pain and discomfort in gestational week 36 + 4. The newborn boy had abdominal distension and yellow fluid per rectum. Therapy with intravenous glucose and sodium chloride decreased his stool frequency and improved his clinical condition. A suspicion of congenital chloride diarrhea was strongly supported using blood gas analyzer to measure an increased chloride concentration in the feces; the diagnosis was confirmed by DNA testing. Discussion. Measurement of chloride in feces using an ordinary blood gas analyzer can serve as a preliminary analysis when congenital chloride diarrhea is suspected. This measurement can be easily performed with a watery feces composition. An easy-accessible chloride measurement available will facilitate the diagnostics and support the initial treatment if CCD is suspected.

  3. Amine and Titanium (IV Chloride, Boron (III Chloride or Zirconium (IV Chloride-Promoted Baylis-Hillman Reactions

    Directory of Open Access Journals (Sweden)

    Shi-Cong Cui

    2001-10-01

    Full Text Available The Baylis-Hillman reactions of various aryl aldehydes with methyl vinyl ketone at temperatures below -20oC using Lewis acids such as titanium (IV chloride, boron (III chloride or zirconium (IV chloride in the presence of a catalytic amount of selected amines used as a Lewis bases afford the chlorinated compounds 1 as the major product in very high yields. Acrylonitrile can also undergo the same reaction to give the corresponding chlorinated product in moderate yield. A plausible reaction mechanism is proposed. However, if the reaction was carried out at room temperature (ca. 20oC, then the Z-configuration of the elimination product 3, derived from 1, was formed as the major product.

  4. Chloride equilibrium potential in salamander cones

    Directory of Open Access Journals (Sweden)

    Bryson Eric J

    2004-12-01

    Full Text Available Abstract Background GABAergic inhibition and effects of intracellular chloride ions on calcium channel activity have been proposed to regulate neurotransmission from photoreceptors. To assess the impact of these and other chloride-dependent mechanisms on release from cones, the chloride equilibrium potential (ECl was determined in red-sensitive, large single cones from the tiger salamander retinal slice. Results Whole cell recordings were done using gramicidin perforated patch techniques to maintain endogenous Cl- levels. Membrane potentials were corrected for liquid junction potentials. Cone resting potentials were found to average -46 mV. To measure ECl, we applied long depolarizing steps to activate the calcium-activated chloride current (ICl(Ca and then determined the reversal potential for the current component that was inhibited by the Cl- channel blocker, niflumic acid. With this method, ECl was found to average -46 mV. In a complementary approach, we used a Cl-sensitive dye, MEQ, to measure the Cl- flux produced by depolarization with elevated concentrations of K+. The membrane potentials produced by the various high K+ solutions were measured in separate current clamp experiments. Consistent with electrophysiological experiments, MEQ fluorescence measurements indicated that ECl was below -36 mV. Conclusions The results of this study indicate that ECl is close to the dark resting potential. This will minimize the impact of chloride-dependent presynaptic mechanisms in cone terminals involving GABAa receptors, glutamate transporters and ICl(Ca.

  5. Dynamic Electrochemical Measurement of Chloride Ions.

    Science.gov (United States)

    Abbas, Yawar; de Graaf, Derk B; Olthuis, Wouter; van den Berg, Albert

    2016-02-05

    This protocol describes the dynamic measurement of chloride ions using the transition time of a silver silver chloride (Ag/AgCl) electrode. Silver silver chloride electrode is used extensively for potentiometric measurement of chloride ions concentration in electrolyte. In this measurement, long-term and continuous monitoring is limited due to the inherent drift and the requirement of a stable reference electrode. We utilized the chronopotentiometric approach to minimize drift and avoid the use of a conventional reference electrode. A galvanostatic pulse is applied to an Ag/AgCl electrode which initiates a faradic reaction depleting the Cl- ions near the electrode surface. The transition time, which is the time to completely deplete the ions near the electrode surface, is a function of the ion concentration, given by the Nernst equation. The square root of the transition time is in linear relation to the chloride ion concentration. Drift of the response over two weeks is negligible (59 µM/day) when measuring 1 mM [Cl-]using a current pulse of 10 Am(-2). This is a dynamic measurement where the moment of transition time determines the response and thus is independent of the absolute potential. Any metal wire can be used as a pseudo-reference electrode, making this approach feasible for long-term measurement inside concrete structures.

  6. Chloride binding site of neurotransmitter sodium symporters.

    Science.gov (United States)

    Kantcheva, Adriana K; Quick, Matthias; Shi, Lei; Winther, Anne-Marie Lund; Stolzenberg, Sebastian; Weinstein, Harel; Javitch, Jonathan A; Nissen, Poul

    2013-05-21

    Neurotransmitter:sodium symporters (NSSs) play a critical role in signaling by reuptake of neurotransmitters. Eukaryotic NSSs are chloride-dependent, whereas prokaryotic NSS homologs like LeuT are chloride-independent but contain an acidic residue (Glu290 in LeuT) at a site where eukaryotic NSSs have a serine. The LeuT-E290S mutant displays chloride-dependent activity. We show that, in LeuT-E290S cocrystallized with bromide or chloride, the anion is coordinated by side chain hydroxyls from Tyr47, Ser290, and Thr254 and the side chain amide of Gln250. The bound anion and the nearby sodium ion in the Na1 site organize a connection between their coordinating residues and the extracellular gate of LeuT through a continuous H-bond network. The specific insights from the structures, combined with results from substrate binding studies and molecular dynamics simulations, reveal an anion-dependent occlusion mechanism for NSS and shed light on the functional role of chloride binding.

  7. Is sodium chloride worth its salt?

    Science.gov (United States)

    McIntosh, Euan; Andrews, Peter J

    2013-06-11

    The choice of fluid for resuscitation of the brain-injured patient remains controversial, and the 'ideal' resuscitation fluid has yet to be identified. Large volumes of hypotonic solutions must be avoided because of the risk of cerebral swelling and intracranial hypertension. Traditionally, 0.9% sodium chloride has been used in patients at risk of intracranial hypertension, but there is increasing recognition that 0.9% saline is not without its problems. Roquilly and colleagues show a reduction in the development of hyperchloremic acidosis in brain-injured patients given 'balanced' solutions for maintenance and resuscitation compared with 0.9% sodium chloride. In this commentary, we explore the idea that we should move away from 0.9% sodium chloride in favor of a more 'physiological' solution.

  8. Efficient cellulose solvent: quaternary ammonium chlorides.

    Science.gov (United States)

    Kostag, Marc; Liebert, Tim; El Seoud, Omar A; Heinze, Thomas

    2013-10-01

    Pure quaternary tetraalkylammonium chlorides with one long alkyl chain dissolved in various organic solvents constitute a new class of cellulose solvents. The electrolytes are prepared in high yields and purity by Menshutkin quaternization, an inexpensive and easy synthesis route. The pure molten tetraalkylammonium chlorides dissolve up to 15 wt% of cellulose. Cosolvents, including N,N-dimethylacetamide (DMA), may be added in large excess, leading to a system of decreased viscosity. Contrary to the well-established solvent DMA/LiCl, cellulose dissolves in DMA/quaternary ammonium chlorides without any pretreatment. Thus, the use of the new solvent avoids some disadvantages of DMA/LiCl and ionic liquids, the most extensively employed solvents for homogeneous cellulose chemistry.

  9. Alkali metal and ammonium chlorides in water and heavy water (binary systems)

    CERN Document Server

    Cohen-Adad, R

    1991-01-01

    This volume surveys the data available in the literature for solid-fluid solubility equilibria plus selected solid-liquid-vapour equilibria, for binary systems containing alkali and ammonium chlorides in water or heavy water. Solubilities covered are lithium chloride, sodium chloride, potassium chloride, rubidium chloride, caesium chloride and ammonium chloride in water and heavy water.

  10. Hazards of lithium thionyl chloride batteries

    Science.gov (United States)

    Parry, J. M.

    1978-01-01

    Two different topics which only relate in that they are pertinent to lithium thionyl chloride battery safety are discussed. The first topic is a hazards analysis of a system (risk assessment), a formal approach that is used in nuclear engineering, predicting oil spills, etc. It is a formalized approach for obtaining assessment of the degree of risk associated with the use of any particular system. The second topic is a small piece of chemistry related to the explosions that can occur with lithium thionyl chloride systems. After the two topics are presented, a discussion is generated among the Workshop participants.

  11. EVALUATION OF BACTERICIDAL EFFECTIVENESS OF BENZALKONIUM CHLORIDE

    Directory of Open Access Journals (Sweden)

    K. Imandel

    1996-06-01

    Full Text Available Benzalkonium chloride is a quaternary ammounium Compounds derivative under different names such as Afxhang, Hamoon, Mahan etc, which have great and expanded use in sanitation and medical affairs. Bactericidal activity of these disinfectants was fulfilled according to National Standard Method No.2842 on Staph. Aureus, Sal. Typhimouium and E. coli. This laboratory test showed that, except Mahan that has not bactericidal efficacy on E.coli at concentration 0.4 percent, other disinfectants under the study in concentrations of 0.4, 0.8, 1, 1.2 percent have reliable antibacterial properties, and bacterial resistance to benzalkonium chloride has not occurred yet.

  12. Cesium chloride-induced torsades de pointes.

    Science.gov (United States)

    Wiens, Matthew; Gordon, Wendy; Baulcomb, Daisy; Mattman, Andre; Mock, Tom; Brown, Robert

    2009-09-01

    The chloride salt of cesium, a group 1A element, is gaining popularity as an alternative treatment of advanced cancers. Cesium chloride has primarily been used in cardiovascular research for arrhythmogenesis in animals because of its potassium-blocking effects. The present report describes a 45-year-old woman with metastatic breast cancer who experienced repeated episodes of torsades de pointes polymorphic ventricular tachycardia after several months of oral cesium therapy. There was a clear temporal relationship between cesium ingestion and the arrhythmia, which later resolved following discontinuation of cesium therapy. Serial cesium plasma and whole blood levels were measured over the ensuing six months and pharmacokinetic analysis was performed.

  13. An Automatic Clustering Technique for Optimal Clusters

    CERN Document Server

    Pavan, K Karteeka; Rao, A V Dattatreya; 10.5121/ijcsea.2011.1412

    2011-01-01

    This paper proposes a simple, automatic and efficient clustering algorithm, namely, Automatic Merging for Optimal Clusters (AMOC) which aims to generate nearly optimal clusters for the given datasets automatically. The AMOC is an extension to standard k-means with a two phase iterative procedure combining certain validation techniques in order to find optimal clusters with automation of merging of clusters. Experiments on both synthetic and real data have proved that the proposed algorithm finds nearly optimal clustering structures in terms of number of clusters, compactness and separation.

  14. Amperometric Sensor for Detection of Chloride Ions

    Directory of Open Access Journals (Sweden)

    Rene Kizek

    2008-09-01

    Full Text Available Chloride ion sensing is important in many fields such as clinical diagnosis, environmental monitoring and industrial applications. We have measured chloride ions at a carbon paste electrode (CPE and at a CPE modified with solid AgNO3, a solution of AgNO3 and/or solid silver particles. Detection limits (3 S/N for chloride ions were 100 μM, 100 μM and 10 μM for solid AgNO3, solution of AgNO3 and/or solid silver particles, respectively. The CPE modified with silver particles is the most sensitive to the presence chloride ions. After that we approached to the miniaturization of the whole electrochemical instrument. Measurements were carried out on miniaturized instrument consisting of a potentiostat with dimensions 35 × 166 × 125 mm, screen printed electrodes, a peristaltic pump and a PC with control software. Under the most suitable experimental conditions (Britton-Robinson buffer, pH 1.8 and working electrode potential 550 mV we estimated the limit of detection (3 S/N as 500 nM.

  15. Liquid crystalline critical dynamics in decylammonium chloride

    CERN Document Server

    Lee, K W; Lee, C E; Kang, K H; Rhee, C; Kang, J K

    1999-01-01

    Collective chain dynamics and phase transitions in a model biomembrane, decylammonium chloride (C sub 1 sub 0 H sub 2 sub 1 NH sub 3 Cl), were studied by means of proton nuclear magnetic resonance. Our measurements sensitively reflect the critical dynamics associated with the smectic C to smectic A transition of the lipid bilayer.

  16. Solvothermal synthesis of strontium phosphate chloride nanowire

    Science.gov (United States)

    Lam, W. M.; Wong, C. T.; Li, Z. Y.; Luk, K. D. K.; Chan, W. K.; Yang, C.; Chiu, K. Y.; Xu, B.; Lu, W. W.

    2007-08-01

    Strontium phosphate chloride nanowire was synthesized via a solvothermal treatment of strontium tri-polyphosphate and Collin salt in 1,4-dioxane at 150 °C. The effects of 1,4-dioxane concentration on particle morphology, crystallinity and phase purity were investigated in this study. The specimen morphology was analyzed by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). When the concentration of 1,4-dioxane was below 10%, micron-sized whisker was the dominant form. At 20-25% concentration of 1,4-dioxane, strontium phosphate chloride single-crystalline nanowire was 31±12 nm in diameter and 1.43±0.6 μm in length with an aspect ratio of 52.28±29.41. X-ray diffraction (XRD) pattern of this nanowire matched with that of strontium phosphate chloride (JCPDS #083-0973). When 1,4-dioxane concentration exceeded 25%, nanorod aggregate was the dominant form instead of nanowire. At 20-25% 1,4-dioxane concentration suitable strontium concentration combine with high chemical potential environment favors the formation of nanowires. By adding 1,4-dioxane impure phase such as β-strontium hydrogen phosphate, nanorod formation was suppressed. This method provides an efficient way to synthesize high aspect ratio strontium phosphate chloride nanowire. It has potential bioactive nanocomposite, high mechanical performance bioactive bone cement filler and fluorescent material applications.

  17. Gebromeerde vlamvertragers en broomdioxines in Choline Chloride

    NARCIS (Netherlands)

    Egmond, van H.J.; Traag, W.A.; Hoogenboom, L.A.P.

    2008-01-01

    Sinds begin 2008 worden in het Nationaal Plan Diervoeder Choline Chloride monsters (= diervoeder additief) gevonden waarbij de DR CALUX screenings-assay een sterk verdacht signaal geeft, maar bij de GC-HRMS geen dioxines en dl-PCB's worden gevonden. Dit rapport beschrijft de resultaten van nader ond

  18. Controlling chloride ions diffusion in concrete.

    Science.gov (United States)

    Zeng, Lunwu; Song, Runxia

    2013-11-28

    The corrosion of steel in concrete is mainly due to the chemical reaction between the chloride ions and iron ions. Indeed, this is a serious threaten for reinforced concrete structure, especially for the reinforced concrete structure in the sea. So it is urgent and important to protect concrete against chloride ions corrosion. In this work, we report multilayer concrete can cloak chloride ions. We formulated five kinds of concrete A, B, C, D and E, which are made of different proportion of cement, sand and glue, and fabricated six-layer (ABACAD) cylinder diffusion cloak and background media E. The simulation results show that the six-layer mass diffusion cloak can protect concrete against chloride ions penetration, while the experiment results show that the concentration gradients are parallel and equal outside the outer circle in the diffusion flux lines, the iso-concentration lines are parallel outside the outer circle, and the concentration gradients in the inner circle are smaller than those outside the outer circle.

  19. Influence of compaction on chloride ingress

    NARCIS (Netherlands)

    Zlopasa, J.

    2012-01-01

    Experiences from practice show the need for more of an understanding and optimization of the compaction process in order to design a more durable concrete structure. Local variations in compaction are very often the reason for initiation of local damage and initiation of chloride induced corrosion.

  20. Controlling chloride ions diffusion in concrete

    Science.gov (United States)

    Zeng, Lunwu; Song, Runxia

    2013-11-01

    The corrosion of steel in concrete is mainly due to the chemical reaction between the chloride ions and iron ions. Indeed, this is a serious threaten for reinforced concrete structure, especially for the reinforced concrete structure in the sea. So it is urgent and important to protect concrete against chloride ions corrosion. In this work, we report multilayer concrete can cloak chloride ions. We formulated five kinds of concrete A, B, C, D and E, which are made of different proportion of cement, sand and glue, and fabricated six-layer (ABACAD) cylinder diffusion cloak and background media E. The simulation results show that the six-layer mass diffusion cloak can protect concrete against chloride ions penetration, while the experiment results show that the concentration gradients are parallel and equal outside the outer circle in the diffusion flux lines, the iso-concentration lines are parallel outside the outer circle, and the concentration gradients in the inner circle are smaller than those outside the outer circle.

  1. Regulated trafficking of the CFTR chloride channel

    NARCIS (Netherlands)

    Braakman, L.J.; Kleizen, B.; Jonge, H.R. de

    2000-01-01

    The cystic fibrosis transmembrane conductance regulator (CFTR), the ABC transporter encoded by the cystic fibrosis gene, is localized in the apical membrane of epithelial cells where it functions as a cyclic AMP-regulated chloride channel and as a regulator of other ion channels and transporters. Wh

  2. 29 CFR 1910.1017 - Vinyl chloride.

    Science.gov (United States)

    2010-07-01

    ... possible exposure conditions. (2) Protective garments shall be provided clean and dry for each use. (i... Required Authorized Personnel Only (3) Containers of polyvinyl chloride resin waste from reactors or other... which may be useful: A. For kidney dysfunction: urine examination for albumin, red blood cells,...

  3. 21 CFR 582.3845 - Stannous chloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives §...

  4. Heavy hitters via cluster-preserving clustering

    DEFF Research Database (Denmark)

    Larsen, Kasper Green; Nelson, Jelani; Nguyen, Huy L.

    2016-01-01

    , providing correctness whp. In fact, a simpler version of our algorithm for p = 1 in the strict turnstile model answers queries even faster than the "dyadic trick" by roughly a log n factor, dominating it in all regards. Our main innovation is an efficient reduction from the heavy hitters to a clustering...... problem in which each heavy hitter is encoded as some form of noisy spectral cluster in a much bigger graph, and the goal is to identify every cluster. Since every heavy hitter must be found, correctness requires that every cluster be found. We thus need a "cluster-preserving clustering" algorithm......, that partitions the graph into clusters with the promise of not destroying any original cluster. To do this we first apply standard spectral graph partitioning, and then we use some novel combinatorial techniques to modify the cuts obtained so as to make sure that the original clusters are sufficiently preserved...

  5. Spatial variability of chloride in concrete within homogeneously exposed areas

    NARCIS (Netherlands)

    Angst, U.M.; Polder, R.B.

    2014-01-01

    The concept of variability is increasingly considered in service life predictions. This paper reports experimental data on the spatial distribution of chloride in uncracked concrete subjected to homogeneous exposure. Chloride concentrations were measured with potentiometric sensors embedded in concr

  6. Viscosity and density tables of sodium chloride solutions

    Energy Technology Data Exchange (ETDEWEB)

    Fair, J.A.; Ozbek, H. (comps.)

    1977-04-01

    A file is presented containing tabulated data extracted from the scientific literature on the density and viscosity of aqueous sodium chloride solutions. Also included is a bibliography of the properties of aqueous sodium chloride solutions. (MHR)

  7. Hydrolysis of ferric chloride in solution

    Energy Technology Data Exchange (ETDEWEB)

    Lussiez, G.; Beckstead, L.

    1996-11-01

    The Detox{trademark} process uses concentrated ferric chloride and small amounts of catalysts to oxidize organic compounds. It is under consideration for oxidizing transuranic organic wastes. Although the solution is reused extensively, at some point it will reach the acceptable limit of radioactivity or maximum solubility of the radioisotopes. This solution could be cemented, but the volume would be increased substantially because of the poor compatibility of chlorides and cement. A process has been developed that recovers the chloride ions as HCl and either minimizes the volume of radioactive waste or permits recycling of the radioactive chlorides. The process involves a two-step hydrolysis at atmospheric pressure, or preferably under a slight vacuum, and relatively low temperature, about 200{degrees}C. During the first step of the process, hydrolysis occurs according to the reaction below: FeCl{sub 3 liquid} + H{sub 2}O {r_arrow} FeOCl{sub solid} + 2 HCl{sub gas} During the second step, the hot, solid, iron oxychloride is sprayed with water or placed in contact with steam, and hydrolysis proceeds to the iron oxide according to the following reaction: 2 FeOCl{sub solid} + H{sub 2}O {r_arrow} Fe{sub 2}O{sub 3 solid} + 2 HCl{sub gas}. The iron oxide, which contains radioisotopes, can then be disposed of by cementation or encapsulation. Alternately, these chlorides can be washed off of the solids and can then either be recycled or disposed of in some other way.

  8. Investigation of factors influencing chloride extraction efficiency during electrochemical chloride extraction from reinforcing concrete

    Science.gov (United States)

    Sharp, Stephen R.

    2005-11-01

    Electrochemical chloride extraction (ECE) is an accelerated bridge restoration method similar to cathodic protection, but operates at higher current densities and utilizes a temporary installation. Both techniques prolong the life of a bridge by reducing the corrosion rate of the reinforcing bar when properly applied. ECE achieves this by moving chlorides away from the reinforcement and out of the concrete while simultaneously increasing the alkalinity of the electrolyte near the reinforcing steel. Despite the proven success, significant use of ECE has not resulted in part due to an incomplete understanding in the following areas: (1) An estimation of the additional service life that can be expected following treatment when the treated member is again subjected to chlorides; (2) The cause of the decrease in current flow and, therefore, chloride removal rate during treatment; (3) Influence of water-to-cement (w/c) ratio and cover depth on the time required for treatment. This dissertation covers the research that is connected to the last two areas listed above. To begin examining these issues, plain carbon steel reinforcing bars (rebar) were embedded in portland cement concrete slabs of varying water-to-cement (w/c) ratios and cover depths, and then exposed to chlorides. A fraction of these slabs had sodium chloride added as an admixture, with all of the slabs subjected to cyclical ponding with a saturated solution of sodium chloride. ECE was then used to remove the chlorides from these slabs while making electrical measurements in the different layers between the rebar (cathode) and the titanium mat (anode) to follow the progress of the ECE process. During this study, it was revealed that the resistance of the outer concrete surface layer increases during ECE, inevitably restricting current flow, while the resistance of the underlying concrete decreases or remains constant. During ECE treatment, a white residue formed on the surface of the concrete. Analyses of the

  9. Aspergilli Response to Benzalkonium Chloride and Novel-Synthesized Fullerenol/Benzalkonium Chloride Nanocomposite

    OpenAIRE

    Nikola Unković; Milica Ljaljević Grbić; Miloš Stupar; Jelena Vukojević; Vesna Janković; Danica Jović; Aleksandar Djordjević

    2015-01-01

    A comprehensive comparative analysis of antifungal potential of benzalkonium chloride and newly synthesized fullerenol/benzalkonium chloride nanocomposite was conducted to assess the possible impact of carbon-based nanocarrier on antimicrobial properties of the commonly used biocide. Physical characterization of synthesized nanocomposite showed zeta potential of +37.4 mV and inhomogeneous particles size distribution, with nanocomposite particles’ dimensions within 30–143 nm and maximum number...

  10. Prenatal susceptibility to carcinogenesis by xenobiotic substances including vinyl chloride.

    OpenAIRE

    Rice, J M

    1981-01-01

    The carcinogenicity of vinyl chloride for experimental animals when administered transplacentally is reviewed in comparison with known transplacental carcinogens, including those that, like vinyl chloride, are dependent on enzyme-mediated metabolic conversion to a reactive intermediate in maternal or fetal tissues. Vinyl chloride is converted by mixed-function oxidases to the reactive metabolite chlorooxirane, the carcinogenicity of which is also reviewed. Vinyl chloride is unequivocally a tr...

  11. Stability of Alprostadil in 0.9% Sodium Chloride Stored in Polyvinyl Chloride Containers.

    Science.gov (United States)

    McCluskey, Susan V; Kirkham, Kylian; Munson, Jessica M

    2017-01-01

    The stability of alprostadil diluted in 0.9% sodium chloride stored in polyvinyl chloride (VIAFLEX) containers at refrigerated temperature, protected from light, is reported. Five solutions of alprostadil 11 mcg/mL were prepared in 250 mL 0.9% sodium chloride polyvinyl chloride (PL146) containers. The final concentration of alcohol was 2%. Samples were stored under refrigeration (2°C to 8°C) with protection from light. Two containers were submitted for potency testing and analyzed in duplicate with the stability-indicating high-performance liquid chromatography assay at specific time points over 14 days. Three containers were submitted for pH and visual testing at specific time points over 14 days. Stability was defined as retention of 90% to 110% of initial alprostadil concentration, with maintenance of the original clear, colorless, and visually particulate-free solution. Study results reported retention of 90% to 110% initial alprostadil concentration at all time points through day 10. One sample exceeded 110% potency at day 14. pH values did not change appreciably over the 14 days. There were no color changes or particle formation detected in the solutions over the study period. This study concluded that during refrigerated, light-protected storage in polyvinyl chloride (VIAFLEX) containers, a commercial alcohol-containing alprostadil formulation diluted to 11 mcg/mL with 0.9% sodium chloride 250 mL was stable for 10 days.

  12. Cluster headache

    Directory of Open Access Journals (Sweden)

    Ducros Anne

    2008-07-01

    Full Text Available Abstract Cluster headache (CH is a primary headache disease characterized by recurrent short-lasting attacks (15 to 180 minutes of excruciating unilateral periorbital pain accompanied by ipsilateral autonomic signs (lacrimation, nasal congestion, ptosis, miosis, lid edema, redness of the eye. It affects young adults, predominantly males. Prevalence is estimated at 0.5–1.0/1,000. CH has a circannual and circadian periodicity, attacks being clustered (hence the name in bouts that can occur during specific months of the year. Alcohol is the only dietary trigger of CH, strong odors (mainly solvents and cigarette smoke and napping may also trigger CH attacks. During bouts, attacks may happen at precise hours, especially during the night. During the attacks, patients tend to be restless. CH may be episodic or chronic, depending on the presence of remission periods. CH is associated with trigeminovascular activation and neuroendocrine and vegetative disturbances, however, the precise cautive mechanisms remain unknown. Involvement of the hypothalamus (a structure regulating endocrine function and sleep-wake rhythms has been confirmed, explaining, at least in part, the cyclic aspects of CH. The disease is familial in about 10% of cases. Genetic factors play a role in CH susceptibility, and a causative role has been suggested for the hypocretin receptor gene. Diagnosis is clinical. Differential diagnoses include other primary headache diseases such as migraine, paroxysmal hemicrania and SUNCT syndrome. At present, there is no curative treatment. There are efficient treatments to shorten the painful attacks (acute treatments and to reduce the number of daily attacks (prophylactic treatments. Acute treatment is based on subcutaneous administration of sumatriptan and high-flow oxygen. Verapamil, lithium, methysergide, prednisone, greater occipital nerve blocks and topiramate may be used for prophylaxis. In refractory cases, deep-brain stimulation of the

  13. 21 CFR 520.260 - n-Butyl chloride capsules.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false n-Butyl chloride capsules. 520.260 Section 520.260... DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.260 n-Butyl chloride capsules. (a)(1) Specifications. n-Butyl chloride capsules, veterinary contain 272 milligrams or 816 milligrams...

  14. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Science.gov (United States)

    2010-10-01

    ... FOR TANK CARS Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) § 179.102-17 Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17...

  15. Palladium-catalyzed silylation of aryl chlorides with hexamethyldisilane.

    Science.gov (United States)

    McNeill, Eric; Barder, Timothy E; Buchwald, Stephen L

    2007-09-13

    A method for the palladium-catalyzed silylation of aryl chlorides has been developed. The method affords desired product in good yield, is tolerant of a variety of functional groups, and provides access to a wide variety of aryltrimethylsilanes from commercially available aryl chlorides. Additionally, a one-pot procedure that converts aryl chlorides into aryl iodides has been developed.

  16. Intrinsic Resistance of Burkholderia cepacia Complex to Benzalkonium Chloride

    OpenAIRE

    Youngbeom Ahn; Jeong Myeong Kim; Ohgew Kweon; Seong-Jae Kim; Jones, Richard C.; Kellie Woodling; Goncalo Gamboa da Costa; LiPuma, John J.; David Hussong; Marasa, Bernard S.; Cerniglia, Carl E.

    2016-01-01

    ABSTRACT Pharmaceutical products that are contaminated with Burkholderia cepacia complex (BCC) bacteria may pose serious consequences to vulnerable patients. Benzyldimethylalkylammonium chloride (BZK) cationic surfactants are extensively used in medical applications and have been implicated in the coselection of antimicrobial resistance. The ability of BCC to degrade BZK, tetradecyldimethylbenzylammonium chloride (C14BDMA-Cl), dodecyldimethylbenzylammonium chloride (C12BDMA-Cl), decyldimethyl...

  17. Retention of vinyl chloride in the human lung.

    OpenAIRE

    Krajewski, J.; Dobecki, M; Gromiec, J

    1980-01-01

    Experiments with volunteers showed that 42% of an inhaled dose of vinyl chloride is retained in the lungs. This value is independent of the concentration of vinyl chloride in the air. Elimination of vinyl chloride through the lungs is negligible since its concentration in expired air decreases immediately after the cessation of exposure.

  18. Kinetics of Vinyl Chloride Polymerization with Mixture of Initiators

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Kinetic models for the rate constants of vinyl chloride polymerization in the presence of initiator mixtures were proposed. They may be used to design the initiator recipes for the vinyl chloride polymerization with uniform rate at different temperatures at which various grades of poly(vinyl chloride) will be prepared.

  19. 46 CFR 154.1740 - Vinyl chloride: Inhibiting and inerting.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride: Inhibiting and inerting. 154.1740... Operating Requirements § 154.1740 Vinyl chloride: Inhibiting and inerting. When a vessel is carrying vinyl chloride, the master shall ensure that: (a) Section 154.1818 is met; or (b) Section 154.1710 is met,...

  20. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Quaternary ammonium chloride combination. 172.165... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food additive, quaternary ammonium chloride combination, may be safely used in food in accordance with...

  1. Partitional clustering algorithms

    CERN Document Server

    2015-01-01

    This book summarizes the state-of-the-art in partitional clustering. Clustering, the unsupervised classification of patterns into groups, is one of the most important tasks in exploratory data analysis. Primary goals of clustering include gaining insight into, classifying, and compressing data. Clustering has a long and rich history that spans a variety of scientific disciplines including anthropology, biology, medicine, psychology, statistics, mathematics, engineering, and computer science. As a result, numerous clustering algorithms have been proposed since the early 1950s. Among these algorithms, partitional (nonhierarchical) ones have found many applications, especially in engineering and computer science. This book provides coverage of consensus clustering, constrained clustering, large scale and/or high dimensional clustering, cluster validity, cluster visualization, and applications of clustering. Examines clustering as it applies to large and/or high-dimensional data sets commonly encountered in reali...

  2. Clustering and Community Detection with Imbalanced Clusters

    OpenAIRE

    Aksoylar, Cem; Qian, Jing; Saligrama, Venkatesh

    2016-01-01

    Spectral clustering methods which are frequently used in clustering and community detection applications are sensitive to the specific graph constructions particularly when imbalanced clusters are present. We show that ratio cut (RCut) or normalized cut (NCut) objectives are not tailored to imbalanced cluster sizes since they tend to emphasize cut sizes over cut values. We propose a graph partitioning problem that seeks minimum cut partitions under minimum size constraints on partitions to de...

  3. Relation between chloride exchange diffusion and a conductive chloride pathway across the isolated skin of the toad (Bufo bufo)

    DEFF Research Database (Denmark)

    Kristensen, P; Larsen, Erik Hviid

    1978-01-01

    Substitution of chloride in the outside bathing medium of the toad skin with bromide, iodide, nitrate and sulphate leads to a reduction in the apparent exchange diffusion of chloride across this tissue, and also to a reduction of the chloride current recorded during hyperpolarization. A series of...

  4. Cluster headaches.

    Science.gov (United States)

    Ryan, R E; Ryan, R E

    1989-12-01

    The patient with cluster headaches will be afflicted with the most severe type of pain that one will encounter. If the physician can do something to help this patient either by symptomatic or, more importantly, prophylactic treatment, he or she will have a most thankful patient. This type of headache is seen most frequently in men, and occurs in a cyclic manner. During an acute cycle, the patient will experience a daily type of pain that may occur many times per day. The pain is usually unilateral and may be accompanied by unilateral lacrimation, conjunctivitis, and clear rhinorrhea. Prednisone is the first treatment we employ. Patients are seen for follow-up approximately twice a week, and their medication is lowered in an appropriate manner, depending on their response to the treatment. Regulation of dosage has to be individualized, and when one reaches the lower dose such as 5 to 10 mg per day, the drug may have to be tapered more slowly, or even maintained at that level for a period of time to prevent further recurrence of symptoms. We frequently will use an intravenous histamine desensitization technique to prevent further attacks. We will give the patient an ergotamine preparation to use for symptomatic relief. As these patients often have headaches during the middle of the night, we will place the patient on a 2-mg ergotamine preparation to take prior to going to bed in the evening. This often works in a prophylactic nature, and prevents the nighttime occurrence of a headache. We believe that following these principles to make the accurate diagnosis and institute the proper therapy will help the practicing otolaryngologist recognize and treat patients suffering from this severe pain.

  5. A facile one-pot oxidation-assisted dealloying protocol to massively synthesize monolithic core-shell architectured nanoporous copper@cuprous oxide nanonetworks for photodegradation of methyl orange

    Science.gov (United States)

    Liu, Wenbo; Chen, Long; Dong, Xin; Yan, Jiazhen; Li, Ning; Shi, Sanqiang; Zhang, Shichao

    2016-11-01

    In this report, a facile and effective one-pot oxidation-assisted dealloying protocol has been developed to massively synthesize monolithic core-shell architectured nanoporous copper@cuprous oxide nanonetworks (C-S NPC@Cu2O NNs) by chemical dealloying of melt-spun Al 37 at.% Cu alloy in an oxygen-rich alkaline solution at room temperature, which possesses superior photocatalytic activity towards photodegradation of methyl orange (MO). The experimental results show that the as-prepared nanocomposite exhibits an open, bicontinuous interpenetrating ligament-pore structure with length scales of 20 ± 5 nm, in which the ligaments comprising Cu and Cu2O are typical of core-shell architecture with uniform shell thickness of ca. 3.5 nm. The photodegradation experiments of C-S NPC@Cu2O NNs show their superior photocatalytic activities for the MO degradation under visible light irradiation with degradation rate as high as 6.67 mg min-1 gcat-1, which is a diffusion-controlled kinetic process in essence in light of the good linear correlation between photodegradation ratio and square root of irradiation time. The excellent photocatalytic activity can be ascribed to the synergistic effects between unique core-shell architecture and 3D nanoporous network with high specific surface area and fast mass transfer channel, indicating that the C-S NPC@Cu2O NNs will be a promising candidate for photocatalysts of MO degradation.

  6. Preparation of poly(butyl methacrylate-co-ethyleneglyceldimethacrylate) monolithic column modified with β-cyclodextrin and nano-cuprous oxide and its application in polymer monolithic microextraction of polychlorinated biphenyls.

    Science.gov (United States)

    Zheng, Haijiao; Liu, Qingwen; Jia, Qiong

    2014-05-23

    A poly(butyl methacrylate-co-ethyleneglyceldimethacrylate) (poly(BMA-EDMA)) monolithic column was prepared with in situ polymerization method and modified with allylamine-β-cyclodextrin (ALA-β-CD) and nano-cuprous oxide (Cu2O). A polymer monolith microextraction method was developed with the modified monolithic column for the preconcentration of polychlorinated biphenyls combined with gas chromatography-electron capture detector. Various parameters affecting the extraction efficiency were investigated and optimized. Under the optimum experimental conditions, we obtained acceptable linearities, low limits of detection, and good intra-day/inter-day relative standard deviations. Because of the hydrophobic properties of β-CD and the porous nano structure of Cu2O, the enrichment capacity of the poly(BMA-EDMA) monolithic column was significantly improved. The extraction efficiency followed the order: poly(BMA-EDMA-ALA-β-CD-Cu2O)>poly(BMA-EDMA-ALA-β-CD)>poly(BMA-EDMA)>direct GC analysis. When applied to the determination of polychlorinated biphenyls in wine samples, low limits of detection (0.09ngmL(-1)) were obtained under the preoptimized conditions (sample volume 1.0mL, sample flow rate 0.1mLmin(-1), eluent volume 0.1mL, and eluent flow rate 0.05mLmin(-1)). In addition, the present method was employed to determine polychlorinated biphenyls in red wine samples and the accuracy was assessed through recovery experiments. The obtained recovery values were in the range of 78.8-104.1% with relative standard deviations less than 9.0%.

  7. Calcium/thionyl chloride battery technology

    Science.gov (United States)

    Counts, T.

    1985-12-01

    This final report documents the development efforts conducted by the Lithium Batteries Group of the Couples Department of Eagle-Picher Industries. The objective of the project was to develop calcium-thionyl chloride cell technology. The original project was divided into two main tasks. Task One was to consist of component optimization and stability studies. Once sufficiently advanced, the ongoing results of Task One were to be integrated with Task Two. Task Two was to consist of demonstration of an optimized primary cell. In July, 1983, the program was redirected. Task Two was split, with effort to be directed toward both the original primary cell and toward a high discharge rate reserve configuration cell. Additional electrolyte salts were to be evaluated as a means of improving the storability of the active calcium-thionyl chloride cell.

  8. Carbonisation of coal with chlorides content

    Energy Technology Data Exchange (ETDEWEB)

    E. Plevova

    2002-07-01

    From accessible literature it is evident that the addition of Lewis acids to coal before carbonisation can effect the course of reactions in the way of getting required products. An investigation was carried out into the effects of addition of chloride solutions. For experiments low concentration of solutions of three chlorides (PbCl{sub 2}, ZnCl{sub 2}, AlC{sub 3}) were used. Then samples were carbonised in a special coking retort. Volatile products were collected to establish the mass balance of this process. The resultant properties of obtained char and coal tar were estimated. Evaluation of the solid phase showed the increasing of specific surface although the used solution concentration was quite low. Estimation of obtained tar indicated mainly increasing of aromatic hydrocarbons in consequence of charring and aromatisation of carbon skeleton. 3 refs., 1 fig., 3 tabs.

  9. Benzalkonium chloride. Health hazard evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    Bernholc, N.M.

    1984-01-01

    Health hazards associated with the use of benzalkonium chlorides (BAC) are reviewed. Benzalkonium chloride is extensively used as a cationic disinfectant. It is found in a great many over-the-counter and prescription eye products, disinfectants, shampoos, and deodorants, and is used in concentrations that range from 0.001 to 0.01% in eyedrops, up to 2.5% in concentrated liquid disinfectants. Solutions of 0.03 to 0.04% BAC may cause temporary eye irritation in humans but are unlikely to cause any skin response except in persons allergic to quaternary ammonium compounds. Inhalation of a vaporized 10% solution of BAC produced a bronchospasmodic reaction in a previously sensitized individual. At present no other human health effects from BAC have been documented or inferred from exposure to such dilute concentrations.

  10. BARRIER PROPERTIES OF VINYLIDENE CHLORIDE COPOLYMERS

    Institute of Scientific and Technical Information of China (English)

    LI Yuesheng; WENG Zhixue; HUANG Zhiming; PAN Zuren

    1996-01-01

    The permeability coefficients of a series of copolymers of vinylidene chloride (VDC)with methyl acrylate (MA), butyl acrylate (BA) or vinyl chloride (VC) (as comonomer)to oxygen and carbon dioxide have been measured at 1.0 MPa and 30℃, while those to water vapor have been measured at 30℃ and 100% relative humidity. All the copolymers are semicrystalline. VDC/MA copolymers have lower melting temperature compared with VDC/BA copolymers, while that melting temperature of VDC/VC copolymer is higher than that of VDC/acrylate copolymers with the same VDC content. The barrier property of the copolymers is predominantly controlled by crystallite, free volume fraction, and cohesive energy. The permeability coefficients of VDC/MA copolymers to oxygen, carbon dioxide, and water vapor were successfully correlated with the ratio of free volume to cohesive energy.

  11. STABILISATION OF SILTY CLAY SOIL USING CHLORIDE

    Directory of Open Access Journals (Sweden)

    TAMADHER T. ABOOD

    2007-04-01

    Full Text Available The object of this paper is to investigate the effect of adding different chloride compounds including (NaCl, MgCl2, CaCl2 on the engineering properties of silty clay soil. Various amounts of salts (2%, 4%, and 8% were added to the soil to study the effect of salts on the compaction characteristics, consistency limits and compressive strength. The main findings of this study were that the increase in the percentage of each of the chloride compounds increased the maximum dry density and decrease the optimum moisture content. The liquid limit, plastic limit and plasticity index decreased with the increase in salt content. The unconfinedcompressive strength increased as the salt content increased.

  12. Iron (III) chloride doping of CVD graphene.

    Science.gov (United States)

    Song, Yi; Fang, Wenjing; Hsu, Allen L; Kong, Jing

    2014-10-03

    Chemical doping has been shown as an effective method of reducing the sheet resistance of graphene. We present the results of our investigations into doping large area chemical vapor deposition graphene using Iron (III) Chloride (FeCl(3)). It is shown that evaporating FeCl(3) can increase the carrier concentration of monolayer graphene to greater than 10(14) cm(-2) and achieve resistances as low as 72 Ω sq(-1). We also evaluate other important properties of the doped graphene such as surface cleanliness, air stability, and solvent stability. Furthermore, we compare FeCl(3) to three other common dopants: Gold (III) Chloride (AuCl(3)), Nitric Acid (HNO(3)), and TFSA ((CF(3)SO(2))(2)NH). We show that compared to these dopants, FeCl(3) can not only achieve better sheet resistance but also has other key advantages including better solvent stability.

  13. Chloride migration in concrete with superabsorbent polymers

    DEFF Research Database (Denmark)

    Hasholt, Marianne Tange; Jensen, Ole Mejlhede

    2015-01-01

    Superabsorbent polymers (SAP) can be used as a means for internal curing of concrete. In the present study, the development of transport properties of concrete with SAP is investigated. The chloride migration coefficient according to NT BUILD 492 is used as a measure of this. Twenty concrete...... mixtures are tested 7, 14, and 28 days after casting. The development of degree of hydration is followed for 20 corresponding paste mixtures. Both when SAP is added with extra water to compensate the SAP water absorption in fresh concrete and without extra water, the internal curing water held by SAP may...... contribute to increase the degree of hydration. No matter if SAP is added with or without extra water, it appears that the so-called gel space ratio can be used as a key parameter to link age and mixture proportions (water-to-cement ratio and SAP dosage) to the resulting chloride migration coefficient...

  14. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator of a polyvinyl chloride plant shall comply with the requirements of this section and § 61.65. (a... is not to exceed 0.02 g vinyl chloride/kg (0.04 lb vinyl chloride/ton) of polyvinyl chloride...

  15. SELECTIVE SODIUM REMOVAL FROM LITHIUM CHLORIDE ...

    African Journals Online (AJOL)

    Preferred Customer

    properties against alkaline cations due to their structure. .... Impurities contents in the feedstock brine. Component. LiCl. Na. Ca. Mg. SO4. 2- ... The pH was varied from 5.0 to 9.0 by careful addition of 0.01 M HCl or ... effect on the structure. ... with sodium ion in lithium chloride brine as follows. +. +. +. +. −= +. yLi. PO. Zr. La.

  16. Electrochemical Studies in Aluminum Chloride Melts

    Science.gov (United States)

    1976-07-31

    Molten Salt Systems", Symposium on Molten Salts, Symposium Volume, The Electrochemical Society , in press (1976). Manuscripts in Preparation--Related to...Fused Salt Technology, Electrochemical Society Meeting, Chicaao, May 8-13, 1973. R. A. Osteryoung, R. H. Abel, L. G. Boxall and B. H. Vassos, "An...aluminate Melts", Electrochemical Society , San Francisco, CA, May, 1974. R. A. Osteryoung, "Chemistry in Aluminum Chloride Melts", Fifth International

  17. Benzalkonium Chloride Intoxication Mimicking Herpes Zoster Encephalitis

    OpenAIRE

    Güler, Ekrem; Olgar, Şeref; Davutoğlu, Mehmet; Garipardıç, Mesut; Karabiber, Hamza

    2011-01-01

    Benzalkonium chloride (BAC) is a frequently used disinfectant and its most well-known side effect is contact dermatitis. In this report, two children who had vesicular dermatitis, headache, lethargy, fever and encephalopathy mimicking Herpes zoster encephalitis were presented. Their consciousness level improved on the second day. From the medical history it was understood that the mother had applied 20% BAC solution to the scalps of two children. The aim of the presentation of this report is ...

  18. Benzalkonium Chloride Intoxication Mimicking Herpes Zoster Encephalitis

    OpenAIRE

    Ekrem Güler; Şeref Olgar; Mehmet Davutoğlu; Mesut Garipardıç; Hamza Karabiber

    2014-01-01

    Benzalkonium chloride (BAC) is a frequently used disinfectant and its most well-known side effect is contact dermatitis. In this report, two children who had vesicular dermatitis, headache, lethargy, fever and encephalopathy mimicking Herpes zoster encephalitis were presented. Their consciousness level improved on the second day. From the medical history it was understood that the mother had applied 20% BAC solution to the scalps of two children. The aim of the presentation of this report is...

  19. EVALUATION OF BACTERICIDAL EFFECTIVENESS OF BENZALKONIUM CHLORIDE

    OpenAIRE

    K. Imandel; M.B. Shaywaard; F. Mobaraki

    1996-01-01

    Benzalkonium chloride is a quaternary ammounium Compounds derivative under different names such as Afxhang, Hamoon, Mahan etc, which have great and expanded use in sanitation and medical affairs. Bactericidal activity of these disinfectants was fulfilled according to National Standard Method No.2842 on Staph. Aureus, Sal. Typhimouium and E. coli. This laboratory test showed that, except Mahan that has not bactericidal efficacy on E.coli at concentration 0.4 percent, other disinfectants under ...

  20. Inactivation of Viruses by Benzalkonium Chloride

    Science.gov (United States)

    Armstrong, J. A.; Froelich, E. J.

    1964-01-01

    Benzalkonium chloride (as Roccal or Zephiran) was found to inactivate influenza, measles, canine distemper, rabies, fowl laryngotracheitis, vaccinia, Semliki Forest, feline pneumonitis, meningopneumonitis, and herpes simplex viruses after 10 min of exposure at 30 C or at room temperature. Poliovirus and encephalomyocarditis virus were not inactivated under the same conditions. It was concluded that all viruses tested were sensitive except members of the picorna group. The literature was reviewed. PMID:4288740

  1. The Accelerated Test of Chloride Permeability of Concrete

    Institute of Scientific and Technical Information of China (English)

    TAN Ke-feng; ODD E Gjφrv

    2003-01-01

    The availability of accelerated chloride permeability test and the effect of w/c ratio, incorporation of silica fume, maximum aggregate size and aggregate type on the chloride permeability were studied. The mathematic analysis certifies that there is a linear relationship between accelerated test and natural diffusion. Test results show that the chloride permeability of concrete increases as w/c ratio increases whilst a limited amount of replacement of cement with silica fume, the chloride permeability decreases dramatically. The maximum aggregate size in the range of 8 to 25 mm seems also affect chloride permeability but with a much less significant level. The chloride permeability of silica fume lightweight aggregate concrete is very low, especially the concrete made with dry lightweight concrete. The chloride permeability can be evaluated by this accelerated test method.

  2. Developing Polymer Cathode Material for the Chloride Ion Battery.

    Science.gov (United States)

    Zhao, Xiangyu; Zhao, Zhigang; Yang, Meng; Xia, Hui; Yu, Tingting; Shen, Xiaodong

    2017-01-25

    The chloride ion battery is an attractive rechargeable battery owing to its high theoretical energy density and sustainable components. An important challenge for research and development of chloride ion batteries lies in the innovation of the cathode materials. Here we report a nanostructured chloride ion-doped polymer, polypyrrole chloride, as a new type of potential cathode material for the chloride ion battery. The as-prepared polypyrrole chloride@carbon nanotubes (PPyCl@CNTs) cathode shows a high reversible capacity of 118 mAh g(-1) and superior cycling stability. Reversible electrochemical reactions of the PPyCl@CNTs cathode based on the redox reactions of nitrogen species and chloride ion transfer are demonstrated. Our work may guide and offer electrode design principles for accelerating the development of rechargeable batteries with anion transfer.

  3. Understanding microwave vessel contamination by chloride species.

    Science.gov (United States)

    Recchia, Sandro; Spanu, Davide; Bianchi, Davide; Dossi, Carlo; Pozzi, Andrea; Monticelli, Damiano

    2016-10-01

    Microwaves are widely used to assist digestion, general sample treatment and synthesis. The use of aqua regia is extensively adopted for the closed vessel mineralization of samples prior to trace element detection, leading to the contamination of microwave vessels by chlorine containing species. The latter are entrapped in the polymeric matrix of the vessels, leading to memory effects that are difficult to remove, among which the risk of silver incomplete recoveries by removal of the sparingly soluble chloride is the predominant one. In the present paper, we determined by mass spectrometry that hydrogen chloride is the species entrapped in the polymeric matrix and responsible for vessel contamination. Moreover, several decontamination treatments were considered to assess their efficiency, demonstrating that several cleaning cycles with water, nitric acid or silver nitrate in nitric acid were inefficient in removing chloride contamination (contamination reduction around 90%). Better results (≈95% decrease) were achieved by a single decontamination step in alkaline environment (sodium hydroxide or ammonia). Finally, a thermal treatment in a common laboratory oven (i.e. without vacuum and ventilation) was tested: a one hour heating at 150°C leads to a 98.5% decontamination, a figure higher than the ones obtained by wet treatments which requires comparable time. The latter treatment is a major advancement with respect to existing treatments as it avoids the need of a vacuum oven for at least 17h as presently proposed in the literature.

  4. Potassium chloride production by microcline chlorination

    Energy Technology Data Exchange (ETDEWEB)

    Orosco, Pablo, E-mail: porosco@unsl.edu.ar [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina); Facultad de Química, Bioquímica y Farmacia, Universidad Nacional de San Luis, Chacabuco y Pedernera, San Luis (Argentina); Ruiz, María del Carmen [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina)

    2015-08-10

    Highlights: • Use of chlorination for the KCl production. • The reagents used were microcline, hydromagnesite and chlorine. • Isothermal and non-isothermal assays were performed in Cl{sub 2}–N{sub 2} mixture. • The chlorination generated KCl at 700 °C. • The chlorination products promote KCl formation. - Abstract: The potassium chloride is one of the most important fertilizers used in agriculture. The current demand of this salt makes interesting the study of potassium chloride production from unconventional potassium resources. In this work the potassium chloride production by chlorination of microcline was investigated. The starting reagents were microcline, hydromagnesite and chlorine. Non-isothermal and isothermal chlorination assays were carried out in a thermogravimetric device adapted to work in corrosive atmospheres. The temperature effect on potassium extraction and the phase transformations produced during chlorination of microcline were studied. The reagents and reaction products were analyzed by X-ray fluorescence (XRF) and X-ray diffraction (XRD). The experimental results indicated that by chlorination of microcline an important extraction of potassium in the temperature range from 800 to 900 °C was produced. Moreover, at 800 °C the forsterite, enstatite and magnesium aluminate spinel phases were generated.

  5. Boldine action against the stannous chloride effect.

    Science.gov (United States)

    Reiniger, I W; Ribeiro da Silva, C; Felzenszwalb, I; de Mattos, J C; de Oliveira, J F; da Silva Dantas, F J; Bezerra, R J; Caldeira-de-Araújo, A; Bernardo-Filho, M

    1999-12-15

    Peumus boldus extract has been used in popular medicine in the treatment of biliar litiase, hepatic insufficiency and liver congestion. Its effects are associated to the substance boldine that is present in its extract. In the present work, we evaluated the influence of boldine both in: (i) the structural conformation of a plasmid pUC 9.1 through gel electrophoresis analysis; and in (ii) the survival of the strain of Escherichia coli AB1157 submitted to reactive oxygen species (ROS), generated by a Fenton like reaction, induced by stannous chloride. Our results show a reduction of the lethal effect induced by stannous chloride on the survival of the E. coli culture in the presence of boldine. The supercoiled form of the plasmid is not modified by stannous chloride in the presence of boldine. We suggest that the protection induced by boldine could be explained by its anti-oxidant mechanism. In this way, the boldine could be reacting with stannous ions, protecting them against the oxidation and, consequently, avoiding the generation of ROS.

  6. Factorial PD-Clustering

    CERN Document Server

    Tortora, Cristina; Summa, Mireille Gettler

    2011-01-01

    Factorial clustering methods have been developed in recent years thanks to the improving of computational power. These methods perform a linear transformation of data and a clustering on transformed data optimizing a common criterion. Factorial PD-clustering is based on Probabilistic Distance clustering (PD-clustering). PD-clustering is an iterative, distribution free, probabilistic, clustering method. Factorial PD-clustering make a linear transformation of original variables into a reduced number of orthogonal ones using a common criterion with PD-Clustering. It is demonstrated that Tucker 3 decomposition allows to obtain this transformation. Factorial PD-clustering makes alternatively a Tucker 3 decomposition and a PD-clustering on transformed data until convergence. This method could significantly improve the algorithm performance and allows to work with large dataset, to improve the stability and the robustness of the method.

  7. Possibilistic Exponential Fuzzy Clustering

    Institute of Scientific and Technical Information of China (English)

    Kiatichai Treerattanapitak; Chuleerat Jaruskulchai

    2013-01-01

    Generally,abnormal points (noise and outliers) cause cluster analysis to produce low accuracy especially in fuzzy clustering.These data not only stay in clusters but also deviate the centroids from their true positions.Traditional fuzzy clustering like Fuzzy C-Means (FCM) always assigns data to all clusters which is not reasonable in some circumstances.By reformulating objective function in exponential equation,the algorithm aggressively selects data into the clusters.However noisy data and outliers cannot be properly handled by clustering process therefore they are forced to be included in a cluster because of a general probabilistic constraint that the sum of the membership degrees across all clusters is one.In order to improve this weakness,possibilistic approach relaxes this condition to improve membership assignment.Nevertheless,possibilistic clustering algorithms generally suffer from coincident clusters because their membership equations ignore the distance to other clusters.Although there are some possibilistic clustering approaches that do not generate coincident clusters,most of them require the right combination of multiple parameters for the algorithms to work.In this paper,we theoretically study Possibilistic Exponential Fuzzy Clustering (PXFCM) that integrates possibilistic approach with exponential fuzzy clustering.PXFCM has only one parameter and not only partitions the data but also filters noisy data or detects them as outliers.The comprehensive experiments show that PXFCM produces high accuracy in both clustering results and outlier detection without generating coincident problems.

  8. Dielectric breakdown during Cs+ sputtering of polyvinyl chloride

    Science.gov (United States)

    Wahoud, F.; Guillot, J.; Audinot, J. N.; Bertrand, P.; Delcorte, A.; Migeon, H. N.

    2014-02-01

    Thin films of insulating polymers are sometimes analyzed by secondary ion mass spectrometry (SIMS) or by X-ray photoelectron spectroscopy (XPS) without the use of an electron gun. In this work, both SIMS and XPS have been used to study the chemical and structural modifications due to the charge effect during Cs+ sputtering of a thin film of polyvinyl chloride (PVC). The kinetic energy distribution study shows that at a small primary fluence ˜1015 Cs+ ions/cm2, the dielectric breakdown voltage of the PVC film is reached, i.e. the minimum voltage that causes a portion of an insulator to become electrically conductive. XPS study indicates that the conducting phase created in the PVC film after energetic Cs+ bombardment consists of graphitized carbon and metallic cesium clusters. After the dielectric breakdown of the film, the positive charge, previously accumulated on the surface, is neutralized through the conductive regions, which are created in the insulating film. During Cs+ sputtering of a PVC film, the chemical structure of the analyzed surface is completely modified and some ionic bonds such as CsC and CsCl are also created.

  9. Anti-chloride permeability and anti-chloride corrodibility of a green high performance concrete admixture in concrete

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yongbao; LIU Xinrong; LIU Dongyan; CHEN Jiangong; HUANG Xiongjun

    2003-01-01

    The effects of green high performance concrete (GHPC) admixture on the anti-chloride permeability and anti- chloride corrodibility of concrete are studied by a series of experiments designed on the basis of the diffusion principle and electrochemical principle. The GHPC admixture consists of fly ash, gangue, slag, red mud, etc., of which the mass fraction of industrial residues is over 96 %. The anti-permeabilities and anti-corrodibilities of the tested GHPC and normal concrete (NC) are evaluated by the Diffusion Coefficients of chloride which was obtained by measuring the concentration of chloride in the tested systems by the voltage difference method. It is found that the adoption of GHPC admixture greatly improves the anti-chloride permeability and anti-chloride corrodibility by modifying the inner structure and contracting the porosity of concrete to the reduce considerably the diffusion rate of chloride. The admixture is desirable regarding its engineering performances as well as economical and environmental interests.

  10. Disparate Behavior of Carbonyl and Thiocarbonyl Compounds: Acyl Chlorides vs Thiocarbonyl Chlorides and Isocyanates vs Isothiocyanates

    Science.gov (United States)

    Wiberg, Kenneth B.; Wang, Yi-gui; Miller, Scott J.; Puchlopek, Angela L.A.; Bailey, William F.; Fair, Justin D.

    2009-01-01

    The reaction of benzoyl chloride with methanol catalyzed by pyridine is 9 times more rapid than is the same reaction with thiobenzoyl chloride. The difference in reactivity, as well as the dealkylation reactions that occur when the reaction of thiobenzoyl chloride is catalyzed by bases such as Et3N, can be understood in terms of the charge distributions in the intermediate acylammonium ions. The reaction of PhNCO with ethanol occurs at a much higher rate (4.8 × 104) than that of PhNCS, corresponding to a difference in activation free energies for the additions of 6 kcal/mol. Transition states for each of these reactions were located, and each involves two alcohol molecules in a hydrogen bonded six-membered ring arrangement. Information concerning differences in reactivity was derived from analysis of Hirshfeld atomic charge distributions and calculated hydrogenolysis reaction energies. PMID:19371054

  11. Chloride Ingress in Concrete with Different Age at Time of First Chloride Exposure

    DEFF Research Database (Denmark)

    Hansen, Esben Østergaard; Iskau, Martin Riis; Hasholt, Marianne Tange

    2016-01-01

    Concrete structures cast in spring have longer time to hydrate and are therefore denser and more resistant to chloride ingress when first subjected to deicing salts in winter than structures cast in autumn. Consequently, it is expected that a spring casting will have a longer service life....... This hypothesis is investigated in the present study by testing drilled cores from concrete cast in 2012 and 2013 on the Svendborgsund Bridge. The cores are subject to petrographic examination and mapping of chloride profiles. Moreover, chloride migration coefficients have been measured. The study shows...... that the effect of the extra time of hydration obtained when casting in spring increases the expected service life of the concrete structure significantly....

  12. Structures of Mn clusters

    Indian Academy of Sciences (India)

    Tina M Briere; Marcel H F Sluiter; Vijay Kumar; Yoshiyuki Kawazoe

    2003-01-01

    The geometries of several Mn clusters in the size range Mn13–Mn23 are studied via the generalized gradient approximation to density functional theory. For the 13- and 19-atom clusters, the icosahedral structures are found to be most stable, while for the 15-atom cluster, the bcc structure is more favoured. The clusters show ferrimagnetic spin configurations.

  13. Dissolution of Globular Clusters

    OpenAIRE

    Baumgardt, Holger

    2006-01-01

    Globular clusters are among the oldest objects in galaxies, and understanding the details of their formation and evolution can bring valuable insight into the early history of galaxies. This review summarises the current knowledge about the dissolution of star clusters and discusses the implications of star cluster dissolution for the evolution of the mass function of star cluster systems in galaxies.

  14. Clustering of correlated networks

    OpenAIRE

    Dorogovtsev, S. N.

    2003-01-01

    We obtain the clustering coefficient, the degree-dependent local clustering, and the mean clustering of networks with arbitrary correlations between the degrees of the nearest-neighbor vertices. The resulting formulas allow one to determine the nature of the clustering of a network.

  15. Contextualizing the Cluster

    DEFF Research Database (Denmark)

    Giacomin, Valeria

    This dissertation examines the case of the palm oil cluster in Malaysia and Indonesia, today one of the largest agricultural clusters in the world. My analysis focuses on the evolution of the cluster from the 1880s to the 1970s in order to understand how it helped these two countries to integrate......-researched topic in the cluster literature – the emergence of clusters, their governance and institutional change, and competition between rival cluster locations – through the case of the Southeast Asian palm oil cluster....

  16. Contextualizing the Cluster

    DEFF Research Database (Denmark)

    Giacomin, Valeria

    This dissertation examines the case of the palm oil cluster in Malaysia and Indonesia, today one of the largest agricultural clusters in the world. My analysis focuses on the evolution of the cluster from the 1880s to the 1970s in order to understand how it helped these two countries to integrate......-researched topic in the cluster literature – the emergence of clusters, their governance and institutional change, and competition between rival cluster locations – through the case of the Southeast Asian palm oil cluster....

  17. Clustering in analytical chemistry.

    Science.gov (United States)

    Drab, Klaudia; Daszykowski, Michal

    2014-01-01

    Data clustering plays an important role in the exploratory analysis of analytical data, and the use of clustering methods has been acknowledged in different fields of science. In this paper, principles of data clustering are presented with a direct focus on clustering of analytical data. The role of the clustering process in the analytical workflow is underlined, and its potential impact on the analytical workflow is emphasized.

  18. A Microfluidic Long-Period Fiber Grating Sensor Platform for Chloride Ion Concentration Measurement

    Directory of Open Access Journals (Sweden)

    Jian-Neng Wang

    2011-09-01

    .8569 mW/√h to −0.5169 mW/√h. Furthermore, the bias stability was determined to be in the range of less than 6.134 × 10−8 mW/h with 600 s time cluster to less than 1.412 × 10−6 mW/h with 600 s time cluster. Thus, the proposed LPFG-based microfluidic platform has the potential for civil, chemical, biological, and biochemical sensing with aqueous solutions. The compact (3.5 × 4.2 cm, low-cost, real-time, small-volume (~70 µL, low-noise, and high-sensitive chloride ion sensing system reported here could hopefully benefit the development and applications in the field of chemical, biotechnical, soil and geotechnical, and civil engineering.

  19. N-(2-Benzoylethylpropan-2-aminium chloride

    Directory of Open Access Journals (Sweden)

    Abdullah Aydın

    2012-09-01

    Full Text Available In the title salt, C12H18NO+·Cl−, N—H...Cl interactions between the free chloride anions and the organic cations connect the molecules into hydrogen-bond dimers, forming a R22(8 motif. The dimers are linked by C—H...O hydrogen bonds into chains extending along [301]. The carbonyl group is co-planar with the phenyl ring [C—C—C=O torsion angle = −3.3 (7°]. The side chain has an E conformation.

  20. Benzalkonium Chloride Intoxication Mimicking Herpes Zoster Encephalitis

    Directory of Open Access Journals (Sweden)

    Ekrem Güler

    2011-06-01

    Full Text Available Benzalkonium chloride (BAC is a frequently used disinfectant and its most well-known side effect is contact dermatitis. In this report, two children who had vesicular dermatitis, headache, lethargy, fever and encephalopathy mimicking Herpes zoster encephalitis were presented. Their consciousness level improved on the second day. From the medical history it was understood that the mother had applied 20% BAC solution to the scalps of two children. The aim of the presentation of this report is to draw attention to the fact that BAC application to the scalp for treating pediculosis capitis may resemble the herpes encephalitis clinical picture.

  1. Oral cadmium chloride intoxication in mice

    DEFF Research Database (Denmark)

    Andersen, O; Nielsen, J B; Svendsen, P

    1988-01-01

    Diethyldithiocarbamate (DDC) is known to alleviate acute toxicity due to injection of cadmium salts. However, when cadmium chloride was administered by the oral route, DDC enhanced rather than alleviated the acute toxicity; both oral and intraperitoneal (i.p.) administration of DDC had this effect....... Thus, orally administered DDC enhanced cadmium-induced duodenal and ileal tissue damage and inhibition of peristalsis, as indicated by an increased intestinal transit time. At low cadmium doses, the whole-body retention of cadmium was increased by oral DDC administration. Intraperitoneally administered...

  2. Synthesis of Aminolaurylpyridinium Chloride as Antimicrobial Agent

    Institute of Scientific and Technical Information of China (English)

    ZHAO Tao; SONG Xin-yuan; SUN Gang

    2008-01-01

    4-amino-laurylpyridinium chloride (ALPC) was synthesized and employed in antimicrobial finishing of wool fabrics. The structures of the salt was fully characterized by using FTIR, 1 H-NMR and 13 C-NMR analysis. The effects of pH conditions of finishing baths, finishing time and temperature, and salt concentrations were investigated. ALPC could form ionic interactions with anionic groups on wool, which contribute to durable antimicrobial functions. The finished wool fabrics exhibited antimicrobial efficacy against Escherichia coli. The washing durability of antimicrobial functions on the finished wool fabrics was also studied.

  3. Magnesium anode for chloride ion batteries.

    Science.gov (United States)

    Zhao, Xiangyu; Li, Qiang; Zhao-Karger, Zhirong; Gao, Ping; Fink, Karin; Shen, Xiaodong; Fichtner, Maximilian

    2014-07-23

    A key advantage of chloride ion battery (CIB) is its possibility to use abundant electrode materials that are different from those in Li ion batteries. Mg anode is presented as such a material for the first time and Mg/C composite prepared by ball milling of Mg and carbon black powders or thermally decomposed MgH2/C composite has been tested as anode for CIB. The electrochemical performance of FeOCl/Mg and BiOCl/Mg was investigated, demonstrating the feasibility of using Mg as anode.

  4. Chloride diffusion in partially saturated cementitious material

    DEFF Research Database (Denmark)

    Nielsen, Erik Pram; Geiker, Mette Rica

    2003-01-01

    The paper proposes a combined application of composite theory and Powers' model for microstructural development for the estimation of the diffusion coefficient as a function of the moisture content of a defect-free cementitious material. Measurements of chloride diffusion in mortar samples (440 kg....../m(3) rapid-hardening Portland cement, w/c = 0.5, maturity minimum 6 months) stored at 65% and 85% RH, as well as in vacuum-saturated mortar samples, illustrate the applicability of the method. (C) 2003 Elsevier Science Ltd. All rights reserved....

  5. 3,4-Dimethylanilinium chloride monohydrate

    Directory of Open Access Journals (Sweden)

    2009-03-01

    Full Text Available The crystal structure of the title compound, C8H12N+·Cl−·H2O, consists of hydrophobic layers of dimethylanilinium cations parallel to the bc plane alternated by hydrophilic layers of chloride anions and water molecules. The layers are linked by N—H...O and N—H...Cl hydrogen bonds involving the ammonium groups of the cations. The cohesion of the ionic structure is further stabilized by O—H...Cl hydrogen-bonding interactions.

  6. Chloride regulates afferent arteriolar contraction in response to depolarization

    DEFF Research Database (Denmark)

    Hansen, P B; Jensen, B L; Skott, O

    1998-01-01

    . The results show that K+-induced contraction of smooth muscle cells in the afferent arteriole is highly sensitive to chloride, whereas neurotransmitter release and ensuing contraction is not dependent on chloride. Thus, there are different activation pathways for depolarizing vasoconstrictors......-Renal vascular reactivity is influenced by the level of dietary salt intake. Recent in vitro data suggest that afferent arteriolar contractility is modulated by extracellular chloride. In the present study, we assessed the influence of chloride on K+-induced contraction in isolated perfused rabbit...... afferent arterioles. In 70% of vessels examined, K+-induced contraction was abolished by acute substitution of bath chloride. Consecutive addition of Cl- (30, 60, 80, 100, 110, and 117 mmol/L) restored the sensitivity to K+, and half-maximal response was observed at 82 mmol/L chloride. The calcium channel...

  7. Investigation of Lithium-Thionyl Chloride Battery Safety Hazards.

    Science.gov (United States)

    1983-01-01

    LITHIUM - THIONYL CHLORIDE BATTERY SAFETY HAZARDS(U) GOULD RESEARCH CENTER ROLLING MEADOWS IL MATERIALS LAB A I ATTIA ET...838-012 7 ontract No. 60921-81-C-0363 6// Investigation of Lithium - Thionyl Chloride Battery Safety Hazards AD A 1 T 2 , Alan I. Attia Gould Research...REPORT & PERIOD COVERED Investigation of Lithium - Thionyl Chloride Final Report Battery Safety Hazards 9/28/81 - 12/31/82 6. PERFORMING ORG. REPORT

  8. Surface Chloride Concentration of Concrete under Shallow Immersion Conditions

    OpenAIRE

    Jun Liu; Kaifeng Tang; Dong Pan; Zongru Lei; Weilun Wang; Feng Xing

    2014-01-01

    Deposition of chloride ions in the surface layer of concrete is investigated in this study. In real concrete structure, chloride ions from the service environment can penetrate into concrete and deposit in the surface layer, to form the boundary condition for further diffusion towards the interior. The deposit amount of chloride ions in the surface layer is normally a function of time, rather than a constant. In the experimental investigation, concrete specimens with different mix proportions...

  9. Chloride ingress profiles measured by electron probe micro analysis

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, O.M. [Univ. of Aberdeen (United Kingdom). Dept. of Chemistry]|[Technical Univ. of Denmark, Lyngby (Denmark). Dept. of Structural Engineering and Materials; Coats, A.M.; Glasser, F.P. [Univ. of Aberdeen (United Kingdom). Dept. of Chemistry

    1996-11-01

    Traditional techniques for measuring chloride ingress profiles do not apply well to high performance cement paste systems; the geometric resolution of the traditional measuring techniques is too low. In this paper measurements by Electron Probe Micro Analysis (EPMA) are presented. EPMA is demonstrated to determine chloride ingress in cement paste on a micrometer scale. Potential chloride ingress routes such as cracks or the paste-aggregate interface may also be characterized by EPMA.

  10. Catalytic Conversion of Cellulose to Levulinic Acid by Metal Chlorides

    Directory of Open Access Journals (Sweden)

    Beixiao Zhang

    2010-08-01

    Full Text Available The catalytic performance of various metal chlorides in the conversion of cellulose to levulinic acid in liquid water at high temperatures was investigated. The effects of reaction parameters on the yield of levulinic acid were also explored. The results showed that alkali and alkaline earth metal chlorides were not effective in conversion of cellulose, while transition metal chlorides, especially CrCl3, FeCl3 and CuCl2 and a group IIIA metal chloride (AlCl3, exhibited high catalytic activity. The catalytic performance was correlated with the acidity of the reaction system due to the addition of the metal chlorides, but more dependent on the type of metal chloride. Among those metal chlorides, chromium chloride was found to be exceptionally effective for the conversion of cellulose to levulinic acid, affording an optimum yield of 67 mol % after a reaction time of 180 min, at 200 °C, with a catalyst dosage of 0.02 M and substrate concentration of 50 wt %. Chromium metal, most of which was present in its oxide form in the solid sample and only a small part in solution as Cr3+ ion, can be easily separated from the resulting product mixture and recycled. Finally, a plausible reaction scheme for the chromium chloride catalyzed conversion of cellulose in water was proposed.

  11. On barium oxide solubility in barium-containing chloride melts

    Energy Technology Data Exchange (ETDEWEB)

    Nikolaeva, Elena V.; Zakiryanova, Irina D.; Bovet, Andrey L.; Korzun, Iraida V. [Ural Federal Univ., Yekaterinburg (Russian Federation). Inst. of High Temperature Electrochemistry

    2016-11-01

    Oxide solubility in chloride melts depends on temperature and composition of molten solvent. The solubility of barium oxide in the solvents with barium chloride content is essentially higher than that in molten alkali chlorides. Spectral data demonstrate the existence of oxychloride ionic groupings in such melts. This work presents the results of the BaO solubility in two molten BaCl{sub 2}-NaCl systems with different barium chloride content. The received data together with earlier published results revealed the main regularities of BaO solubility in molten BaO-BaCl{sub 2}-MCl systems.

  12. Interpretation of postmortem vitreous concentrations of sodium and chloride.

    Science.gov (United States)

    Zilg, B; Alkass, K; Berg, S; Druid, H

    2016-06-01

    Vitreous fluid can be used to analyze sodium and chloride levels in deceased persons, but it remains unclear to what extent such results can be used to diagnose antemortem sodium or chloride imbalances. In this study we present vitreous sodium and chloride levels from more than 3000 cases. We show that vitreous sodium and chloride levels both decrease with approximately 2.2mmol/L per day after death. Since potassium is a well-established marker for postmortem interval (PMI) and easily can be analyzed along with sodium and chloride, we have correlated sodium and chloride levels with the potassium levels and present postmortem reference ranges relative the potassium levels. We found that virtually all cases outside the reference range show signs of antemortem hypo- or hypernatremia. Vitreous sodium or chloride levels can be the only means to diagnose cases of water or salt intoxication, beer potomania or dehydration. We further show that postmortem vitreous sodium and chloride strongly correlate and in practice can be used interchangeably if analysis of one of the ions fails. It has been suggested that vitreous sodium and chloride levels can be used to diagnose drowning or to distinguish saltwater from freshwater drowning. Our results show that in cases of freshwater drowning, vitreous sodium levels are decreased, but that this mainly is an effect of postmortem diffusion between the eye and surrounding water rather than due to the drowning process, since the decrease in sodium levels correlates with immersion time.

  13. Surface Chloride Concentration of Concrete under Shallow Immersion Conditions

    Directory of Open Access Journals (Sweden)

    Jun Liu

    2014-09-01

    Full Text Available Deposition of chloride ions in the surface layer of concrete is investigated in this study. In real concrete structure, chloride ions from the service environment can penetrate into concrete and deposit in the surface layer, to form the boundary condition for further diffusion towards the interior. The deposit amount of chloride ions in the surface layer is normally a function of time, rather than a constant. In the experimental investigation, concrete specimens with different mix proportions are immersed in NaCl solution with a mass concentration of 5%, to simulate the shallow immersion condition in sea water, and the surface chloride concentrations are measured at different ages. It is found that the surface chloride concentration increases following the increasing immersion durations, and varies from a weight percentage of 0.161%–0.781% in concretes with different mix proportions. The w/c (water-to-cement ratio influences the surface chloride concentration significantly, and the higher the w/c is, the higher the surface chloride concentration will be, at the same age. However, following the prolonging of immersion duration, the difference in surface chloride concentration induced by w/c becomes smaller and smaller. The incorporation of fly ash leads to higher surface chloride concentration. The phenomena are explained based on pore structure analyses.

  14. Stochastic modeling of reinforced concrete structures exposed to chloride attack

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Frier, Christian

    2004-01-01

    the reinforcement exceeds a critical threshold value. In the present paper a stochastic model is described by which the chloride content in a reinforced concrete structure can be estimated. The chloride ingress is modeled by a 2-dimensional diffusion process and the diffusion coefficient, surface chloride......For many reinforced concrete structures corrosion of reinforcement is an important problem since it can result in expensive maintenance and repair actions. Further, a significant reduction of the load-bearing capacity can occur. One mode of corrosion initiation is that the chloride content around...

  15. Fire's effect on chloride ingress related durability of concrete structure

    Institute of Scientific and Technical Information of China (English)

    JIN Wei-liang; ZHANG Yi

    2007-01-01

    This paper describes the effects of fire on durability of reinforced concrete structures, and points out that fire not only damages the chemical composition and physical structure of concrete by high temperature, but also leads to an additional risk due to the generation of polyvinyl chloride (PVC)combustion gases. A mathematical model is proposed to calculate chloride ingress profiles in fire damaged concrete, so as to explore the service life prediction of the structure. Rapid Chloride Migration (RCM) test was carried out to determine the chloride diffusion coefficients for the application of the mathematical model. Finally, the detected results of a reported case testified to the validity of the mathematical model.

  16. Durability of cracked fibre reinforced concrete structures exposed to chlorides

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Ekman, Tom; Hansen, Kurt Kielsgaard

    1999-01-01

    is used as environmental load. The chloride penetration is characterized both qualitatively (UV-test) and quantitatively (chloride profile) and by microscopy. The test programme involves three different concrete qualities. Both steel fibres and polypropylene fibres are used in the concrete beams as well......Durability studies are carried out by subjecting FRC-beams to combined mechanical and environmental load. Mechanical load is obtained by exposing beams to 4-point bending until a predefined crack width is reached, using a newly developed test setup. Exposure to a concentrated chloride solution...... as main reinforcement. The effect of the cracks, the fibres and the concrete quality on the chloride penetration is studied....

  17. 氧化锌/氧化亚铜异质结太阳能电池的研究进展∗%Research Progress in Zinc Oxide/Cuprous Oxide Heterojunction Solar Cell

    Institute of Scientific and Technical Information of China (English)

    冯云珠; 董磊; 于良民

    2015-01-01

    Much attention recently has been paid on p-n heterojunction solar cells fabricated with cuprous oxide combined with zinc oxide owing to the advantage of favorable alignment of conductive band edges and lattice matching. The formation of heterojunctions can enhance the seperation of photoinduced electrons and holes,as well as the absor-bance of the light.This review compiles the main milestones reached during the last decades in the development of ZnO/Cu2 O heterojunction solar cells comprehensively.Different junction structures of these cells as planar and ZnO nanoarray based ones related to deposition sequences and synthesis methods are introduced separately,while photovol-taic property influence factors as well as improving methods are discussed.Considering the accomplishments achieved in a relatively short period of time,it can be said that this kind of solar cell can be promisingly applied in clean energy exploitation in the future,in spite of improvement of cell performance still in need.%因氧化亚铜(Cu2 O)、氧化锌(ZnO)能级和晶格匹配较好,近年来较多的研究者将两者复合制备异质结太阳能电池。异质结的形成可提高光生电子-空穴对的分离效率,同时拓展复合结构的光响应范围,从而有效提高太阳能电池性能。介绍了3类主流的 ZnO/Cu2 O 异质结结构,分别阐述主要的进展,综述了异质结结构中 Cu2 O、ZnO的制备方法以及制备条件对电池效率的影响,讨论了电池性能的改进措施,并对 ZnO/Cu2 O 异质结太阳能电池未来的发展前景进行展望。

  18. What Makes Clusters Decline?

    DEFF Research Database (Denmark)

    Østergaard, Christian Richter; Park, Eun Kyung

    2015-01-01

    Most studies on regional clusters focus on identifying factors and processes that make clusters grow. However, sometimes technologies and market conditions suddenly shift, and clusters decline. This paper analyses the process of decline of the wireless communication cluster in Denmark....... The longitudinal study on the high-tech cluster reveals that technological lock-in and exit of key firms have contributed to decline. Entrepreneurship has a positive effect on the cluster’s adaptive capabilities, while multinational companies have contradicting effects by bringing in new resources to the cluster...

  19. The DELTA 181 lithium thionyl chloride battery

    Science.gov (United States)

    Sullivan, Ralph M.; Brown, Lawrence E.; Leigh, A. P.

    In 1986, the Johns Hopkins University/Applied Physics Laboratory (JHU/APL) undertook the development of a sensor module for the DELTA 181 spacecraft, a low earth orbit (LEO) mission of less than two months duration. A large lithium thionyl chloride battery was developed as the spacecraft's primary power source, the first known such use for this technology. The exceptionally high energy density of the lithium thionyl chloride cell was the primary driver for its use, resulting in a completed battery with a specific energy density of 120 Wh/lb. Safety requirements became the primary driver shaping all aspects of the power system design and development due to concerns about the potential hazards of this relatively new, high-energy technology. However, the program was completed without incident. The spacecraft was launched on February 8, 1988, from Kennedy Space Center (KSC) with over 60,000 Wh of battery energy. It reentered on April 2, 1988, still operating after 55 days, providing a successful, practical, and visible demonstration of the use of this technology for spacecraft applications.

  20. Fault locator of an allyl chloride plant

    Directory of Open Access Journals (Sweden)

    Savković-Stevanović Jelenka B.

    2004-01-01

    Full Text Available Process safety analysis, which includes qualitative fault event identification, the relative frequency and event probability functions, as well as consequence analysis, was performed on an allye chloride plant. An event tree for fault diagnosis and cognitive reliability analysis, as well as a troubleshooting system, were developed. Fuzzy inductive reasoning illustrated the advantages compared to crisp inductive reasoning. A qualitative model forecast the future behavior of the system in the case of accident detection and then compared it with the actual measured data. A cognitive model including qualitative and quantitative information by fuzzy logic of the incident scenario was derived as a fault locator for an ally! chloride plant. The obtained results showed the successful application of cognitive dispersion modeling to process safety analysis. A fuzzy inductive reasoner illustrated good performance to discriminate between different types of malfunctions. This fault locator allowed risk analysis and the construction of a fault tolerant system. This study is the first report in the literature showing the cognitive reliability analysis method.

  1. Cesium chloride compatibility testing program: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bryan, G.H.

    1989-11-01

    The US Department of Energy is considering the geologic disposal of the doubly encapsulated cesium chloride (CsCl) produced at the Waste Encapsulation and Storage Facility (WESF). Reliable estimates of long-term corrosion of the inner capsule material by the CsCl under repository storage conditions are needed to assess the hazards associated with geologic disposal of the fission product Cs. The Cesium Chloride Compatibility Program was carried out at PNL to obtain the short-term corrosion data required to accurately estimate long-term attack. In the compatibility tests six standard WESF CsCl capsules were placed vertically in individual insulated containers and allowed to self-heat to a nominal maximum 316L SS/CsCl interface temperature of 450{degree}C. The capsules were held at temperature for times ranging from 0.25 to 6 years. When a test was completed, the capsule was removed from the container and sectioned. Four samples were cut from the inner capsule at prescribed locations and subjected to metallographic examination. Corrosion was determined from photomicrographs of the samples. 16 refs., 41 figs., 16 tabs.

  2. Thermodynamic properties of potassium chloride aqueous solutions

    Science.gov (United States)

    Zezin, Denis; Driesner, Thomas

    2017-04-01

    Potassium chloride is a ubiquitous salt in natural fluids, being the second most abundant dissolved salt in many geological aqueous solutions after sodium chloride. It is a simple solute and strong electrolyte easily dissociating in water, however the thermodynamic properties of KCl aqueous solutions were never correlated with sufficient accuracy for a wide range of physicochemical conditions. In this communication we propose a set of parameters for a Pitzer-type model which allows calculation of all necessary thermodynamic properties of KCl solution, namely excess Gibbs free energy and derived activity coefficient, apparent molar enthalpy, heat capacity and volume, as well as osmotic coefficient and activity of water in solutions. The system KCl-water is one of the best studied aqueous systems containing electrolytes. Although extensive experimental data were collected for thermodynamic properties of these solutions over the years, the accurate volumetric data became available only recently, thus making possible a complete thermodynamic formulation including a pressure dependence of excess Gibbs free energy and derived properties of the KCl-water liquids. Our proposed model is intended for calculation of major thermodynamic properties of KCl aqueous solutions at temperatures ranging from freezing point of a solution to 623 K, pressures ranging from saturated water vapor up to 150 MPa, and concentrations up to the salt saturation. This parameterized model will be further implemented in geochemical software packages and can facilitate the calculation of aqueous equilibrium for reactive transport codes.

  3. Regulated trafficking of the CFTR chloride channel.

    Science.gov (United States)

    Kleizen, B; Braakman, I; de Jonge, H R

    2000-08-01

    The cystic fibrosis transmembrane conductance regulator (CFTR), the ABC transporter encoded by the cystic fibrosis gene, is localized in the apical membrane of epithelial cells where it functions as a cyclic AMP-regulated chloride channel and as a regulator of other ion channels and transporters. Whereas a key role of cAMP-dependent phosphorylation in CFTR-channel gating has been firmly established, more recent studies have provided clear evidence for the existence of a second level of cAMP regulation, i.e. the exocytotic recruitment of CFFR to the plasma membrane and its endocytotic retrieval. Regulated trafficking of the CFTR Cl- channel has sofar been demonstrated only in a subset of CFTR-expressing cell types. However, with the introduction of more sensitive methods to measure CFTR cycling and submembrane localization, it might turn out to be a more general phenomenon that could contribute importantly to both the regulation of CFTR-mediated chloride transport itself and to the regulation of other transporters and CFTR-modulated cellular functions. This review aims to summarize the present state of knowledge regarding polarized and regulated CFTR trafficking and endosomal recycling in epithelial cells, to discuss present gaps in our understanding of these processes at the cellular and molecular level, and to consider its possible implications for cystic fibrosis.

  4. Synthesis and structure characterization of diethyldiallylammonium chloride

    Institute of Scientific and Technical Information of China (English)

    刘立华; 龚竹青; 郑雅杰

    2003-01-01

    The unsaturated quaternary ammonium salt diethyldiallylammonium chloride(DEDAAC) was synthesized in a two-step synthetic method. The influences of the adding method of raw materials and temperature on the yields of diethylallylamine (DEAA), and drying and temperature on the synthesis of DEDAAC were investigated. The content of in-process product DEAA was determined by non-aqueous titration. The structure of product DEDAAC was identified with IR, 1 H NMR and elemental analysis. The results show that adding allyl chloride and sodium hydroxide alternately can increase the yield of DEAA and decrease by-products. In further synthesizing of DEDAAC from DEAA, the step of drying DEAA is very necessary. When DEAA is dried by solid sodium hydroxide, good columnar crystals with a high purity(mp 199.5-201.0 ℃) are obtained; when DEAA is undried or the content of water in DEAA is above 20%, only platelets with bad quality are obtained even without crystals. The suitable synthesis conditions for DEAA and DEDAAC are 35 ℃, 6 h and 40 ℃, 36 h, respectively, and their yields are 69.7% and 67.3%, respectively.

  5. N,N-Dimethyldehydroabietylammonium chloride ethanol monosolvate

    Directory of Open Access Journals (Sweden)

    Xiu-Zhi Huang

    2013-06-01

    Full Text Available The title compound {systematic name: 1-[(1R,4aS,10aR-7-isopropyl-1,4a-dimethyl-1,2,3,4,4a,9,10,10a-octahydrophenanthren-1-yl]-N,N-dimethylmethanaminium chloride ethanol monosolvate}, C22H36N+·Cl−·C2H6O, was synthesized from dehydroabietylamine by N-methylation with formaldehyde/formic acid and transformation into the hydrochloride. The dehydroabietyl moiety exhibits the usual conformation with the two cyclohexane rings in chair and half-chair conformations and a trans-ring junction. The crystal structure is built up from columns of the dehydroabietyl moieties stacked along the a axis. These columns are held together by the chloride ions via N—H...Cl and C—H...Cl interactions, which establish a two-dimensional network parallel to (010. The ethanol solvent molecules are located between the columns and anchored via O—H...Cl hydrogen bonds.

  6. Comprehensive cluster analysis with Transitivity Clustering.

    Science.gov (United States)

    Wittkop, Tobias; Emig, Dorothea; Truss, Anke; Albrecht, Mario; Böcker, Sebastian; Baumbach, Jan

    2011-03-01

    Transitivity Clustering is a method for the partitioning of biological data into groups of similar objects, such as genes, for instance. It provides integrated access to various functions addressing each step of a typical cluster analysis. To facilitate this, Transitivity Clustering is accessible online and offers three user-friendly interfaces: a powerful stand-alone version, a web interface, and a collection of Cytoscape plug-ins. In this paper, we describe three major workflows: (i) protein (super)family detection with Cytoscape, (ii) protein homology detection with incomplete gold standards and (iii) clustering of gene expression data. This protocol guides the user through the most important features of Transitivity Clustering and takes ∼1 h to complete.

  7. THE COMPATIBILITY OF BLENDS OF POLY(VINYL CHLORIDE) OR CHLORINATED POLY(VINYL CHLORIDE) WITH POLY(METHYL METHACRYLATE)

    Institute of Scientific and Technical Information of China (English)

    WANG Qingguo; CHENG Rongshi

    1988-01-01

    IR spectral shifts of carbonyl vibrational absorption for ethyl acetate, which acts analogically as the structural unit of poly(methyl methacrylate), in cyclohexane, chloroform, chlorinated paraffins, poly(vinyl chloride) and chlorinated poly(vinyl chloride) were measured. The results suggest that there are specific interactions between the carbonyl groups and the chlorinated hydrocarbons which could be responsible for the apparent compatibility of poly(vinyl chloride) -poly(methyl methacrylate) and chlorinated poly(vinyl chloride) -poly(methyl methacrylate) blends. Additionally, the effects of the preparation mode of blend films on phase separation and observed compatibility are discussed.

  8. The Cluster Substructure - Alignment Connection

    OpenAIRE

    Plionis, Manolis

    2001-01-01

    Using the APM cluster data we investigate whether the dynamical status of clusters is related to the large-scale structure of the Universe. We find that cluster substructure is strongly correlated with the tendency of clusters to be aligned with their nearest neighbour and in general with the nearby clusters that belong to the same supercluster. Furthermore, dynamically young clusters are more clustered than the overall cluster population. These are strong indications that cluster develop in ...

  9. Nuclear Clusters in Astrophysics

    Energy Technology Data Exchange (ETDEWEB)

    Kubono, S.; Binh, Dam N.; Hayakawa, S.; Hashimoto, H.; Kahl, D.; Wakabayashi, Y.; Yamaguchi, H. [Center for Nuclear Study (CNS), University of Tokyo, Wako Branch at RIKEN 2-1 Hirosawa, Wako, Saitama, 351-0198 (Japan); Teranishi, T. [Department of Physics, Kyushu University, Fukuoka, 812-8581 (Japan); Iwasa, N. [Department of Physics, Tohoku University, Sendai, 980-8578 (Japan); Komatsubara, T. [Department of Physics, Tsukuba University, Ibaraki, 305-8571 (Japan); Kato, S. [Department of Physics, Yamagata University, Yamagata, 990-8560 (Japan); Khiem, Le H. [Institute of Physics, Vietnam Academy for Science and Technology, Hanoi (Viet Nam)

    2010-03-01

    The role of nuclear clustering is discussed for nucleosynthesis in stellar evolution with Cluster Nucleosynthesis Diagram (CND) proposed before. Special emphasis is placed on alpha-induced stellar reactions together with molecular states for O and C burning.

  10. [Pathophysiology of cluster headache].

    Science.gov (United States)

    Donnet, Anne

    2015-11-01

    The aetiology of cluster headache is partially unknown. Three areas are involved in the pathogenesis of cluster headache: the trigeminal nociceptive pathways, the autonomic system and the hypothalamus. The cluster headache attack involves activation of the trigeminal autonomic reflex. A dysfunction located in posterior hypothalamic gray matter is probably pivotal in the process. There is a probable association between smoke exposure, a possible genetic predisposition and the development of cluster headache.

  11. Cluster Physics with Merging Galaxy Clusters

    Directory of Open Access Journals (Sweden)

    Sandor M. Molnar

    2016-02-01

    Full Text Available Collisions between galaxy clusters provide a unique opportunity to study matter in a parameter space which cannot be explored in our laboratories on Earth. In the standard LCDM model, where the total density is dominated by the cosmological constant ($Lambda$ and the matter density by cold dark matter (CDM, structure formation is hierarchical, and clusters grow mostly by merging.Mergers of two massive clusters are the most energetic events in the universe after the Big Bang,hence they provide a unique laboratory to study cluster physics.The two main mass components in clusters behave differently during collisions:the dark matter is nearly collisionless, responding only to gravity, while the gas is subject to pressure forces and dissipation, and shocks and turbulenceare developed during collisions. In the present contribution we review the different methods used to derive the physical properties of merging clusters. Different physical processes leave their signatures on different wavelengths, thusour review is based on a multifrequency analysis. In principle, the best way to analyze multifrequency observations of merging clustersis to model them using N-body/HYDRO numerical simulations. We discuss the results of such detailed analyses.New high spatial and spectral resolution ground and space based telescopeswill come online in the near future. Motivated by these new opportunities,we briefly discuss methods which will be feasible in the near future in studying merging clusters.

  12. The Durban Auto Cluster

    DEFF Research Database (Denmark)

    Lorentzen, Jochen; Robbins, Glen; Barnes, Justin

    2004-01-01

    The paper describes the formation of the Durban Auto Cluster in the context of trade liberalization. It argues that the improvement of operational competitiveness of firms in the cluster is prominently due to joint action. It tests this proposition by comparing the gains from cluster activities i...

  13. The Durban Auto Cluster

    DEFF Research Database (Denmark)

    Lorentzen, Jochen; Robbins, Glen; Barnes, Justin

    2004-01-01

    The paper describes the formation of the Durban Auto Cluster in the context of trade liberalization. It argues that the improvement of operational competitiveness of firms in the cluster is prominently due to joint action. It tests this proposition by comparing the gains from cluster activities i...

  14. Marketing research cluster analysis

    Directory of Open Access Journals (Sweden)

    Marić Nebojša

    2002-01-01

    Full Text Available One area of applications of cluster analysis in marketing is identification of groups of cities and towns with similar demographic profiles. This paper considers main aspects of cluster analysis by an example of clustering 12 cities with the use of Minitab software.

  15. Cluster Correspondence Analysis

    NARCIS (Netherlands)

    M. van de Velden (Michel); A. Iodice D' Enza; F. Palumbo

    2014-01-01

    markdownabstract__Abstract__ A new method is proposed that combines dimension reduction and cluster analysis for categorical data. A least-squares objective function is formulated that approximates the cluster by variables cross-tabulation. Individual observations are assigned to clusters

  16. Microwave Mapping Demonstration Using the Thermochromic Cobalt Chloride Equilibrium

    Science.gov (United States)

    Nguyen, Vu D.; Birdwhistell, Kurt R.

    2014-01-01

    An update to the thermochromic cobalt(II) chloride equilibrium demonstration is described. Filter paper that has been saturated with aqueous cobalt(II) chloride is heated for seconds in a microwave oven, producing a color change. The resulting pink and blue map is used to colorfully demonstrate Le Châtelier's principle and to illuminate the…

  17. Phosphatase inhibitors activate normal and defective CFTR chloride channels

    OpenAIRE

    Becq, F; Jensen, T J; Chang, X B; Savoia, A.; Rommens, J M; Tsui, L C; Buchwald, M; Riordan, J R; Hanrahan, J W

    1994-01-01

    The cystic fibrosis transmembrane conductance regulator (CFTR) chloride channel is regulated by phosphorylation and dephosphorylation at multiple sites. Although activation by protein kinases has been studied in some detail, the dephosphorylation step has received little attention. This report examines the mechanisms responsible for the dephosphorylation and spontaneous deactivation ("rundown") of CFTR chloride channels excised from transfected Chinese hamster ovary (CHO) and human airway epi...

  18. 46 CFR 154.1745 - Vinyl chloride: Transferring operations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Vinyl chloride: Transferring operations. 154.1745 Section 154.1745 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS... Operating Requirements § 154.1745 Vinyl chloride: Transferring operations. A vessel carrying vinyl...

  19. Isolation of polyvinyl chloride degrading bacterial strains from ...

    African Journals Online (AJOL)

    Isolation of polyvinyl chloride degrading bacterial strains from environmental samples using enrichment culture technique. ... by their ability to release chloride from PVC polymer, increase their cell density in test media, carbon dioxide production and growth on the surface of PVC film in plate assay. ... Article Metrics.

  20. Experimental and numerical investigation of chloride ingress in cracked concrete

    NARCIS (Netherlands)

    Šavija, B.

    2014-01-01

    Chloride induced corrosion of reinforcing steel is recognized as the most common deterioration mechanism affecting reinforced concrete structures. As such, it has been in focus of research for more than thirty years. Numerous studies of chloride ingress, corrosion initiation, and corrosion propagati

  1. Myotonic discharges discriminate chloride from sodium muscle channelopathies

    NARCIS (Netherlands)

    Drost, G.; Stunnenberg, B.C.; Trip, J.; Borm, G.F.; McGill, K.C.; Ginjaar, I.H.; Kooi, A.W. van der; Zwarts, M.J.; Engelen, B.G.M. van; Faber, C.G.; Stegeman, D.F.; Lateva, Z.

    2015-01-01

    Non-dystrophic myotonic syndromes represent a heterogeneous group of clinically quite similar diseases sharing the feature of myotonia. These syndromes can be separated into chloride and sodium channelopathies, with gene-defects in chloride or sodium channel proteins of the sarcolemmal membrane. Myo

  2. Chloride penetration into cementitious mortar at early age

    NARCIS (Netherlands)

    Caballero, J.; Polder, R.B.; Leegwater, G.A.; Fraaij, A.L.A.

    2012-01-01

    Modern service life design methods for concrete structures use chloride diffusion data as an input parameter. Abundant data exist for concrete at 28 days and, to a lesser extent, at later ages. This paper presents chloride diffusion data for mortar at ages between 1 day and 28 days age. Rapid Chlori

  3. Hydrophobic treatment of concrete as protection against chloride penetration

    NARCIS (Netherlands)

    Vries, J. de; Polder, R.B.; Borsje, H.

    1996-01-01

    Hydrophobic treatment makes a concrete surface absorb less water and less chloride. Hydrophobic treatment was studied as a protection agninst chloride penetration from deicing salts. Test methods were designed. Nine hydrophobic products were tested, of which three complied to the requirements on fin

  4. Microwave Mapping Demonstration Using the Thermochromic Cobalt Chloride Equilibrium

    Science.gov (United States)

    Nguyen, Vu D.; Birdwhistell, Kurt R.

    2014-01-01

    An update to the thermochromic cobalt(II) chloride equilibrium demonstration is described. Filter paper that has been saturated with aqueous cobalt(II) chloride is heated for seconds in a microwave oven, producing a color change. The resulting pink and blue map is used to colorfully demonstrate Le Châtelier's principle and to illuminate the…

  5. [Survey of plasticizers in polyvinyl chloride toys].

    Science.gov (United States)

    Abe, Yutaka; Yamaguchi, Miku; Mutsuga, Motoh; Hirahara, Yoshichika; Kawamura, Yoko

    2012-01-01

    Plasticizers in 101 samples of polyvinyl chloride (PVC) toys on the Japanese market were surveyed. No phthalates were detected in designated toys, though bis(2-ethylhexyl)phthalate, diisononyl phthalate, diisobutyl phthalate, dibutyl phthalate, diisodecyl phthalate and benzyl butyl phthalate were detected in more than half of other toys. 2,2,4-Tributyl-1,3-pentanediol diisobutylate, o-acetyl tributyl citrate, adipates and diacetyl lauroyl glycerol, which are alternative plasticizers to phthalates, were detected. The results of structural analysis confirmed the presence of di(2-ethylhexyl)terephthalate, tributyl citrate, diisononyl 1,2-cyclohexanedicarboxylate and neopentyl glycol esters; these have not previonsly been reported in Japan. There appears to be a shift in plasticizers used for designated toys from phthalates to new plasticizers, and the number of different plasticizers is increasing.

  6. Electrochemical properties of actinides in molten chlorides

    Energy Technology Data Exchange (ETDEWEB)

    Lambertin, D.; Lacquement, J. [CEA/VALRHO - site de Marcoule, Dept. de Recherche en Retraitement et en Vitrification, DRRV, 30 - Marcoule (France); Sanchez, S.; Picard, G. [Ecole Nationale Superieure de Chimie de Paris, Lab. d' Electrochimie et de Chimie Analytique, UMR 7575 du CNRS, 75 - Paris (France)

    2000-07-01

    The chemical properties of plutonium and cerium chlorides have been studied in the fused CaCl{sub 2}-NaCl equimolar mixture at 550 deg. C using a tungsten working electrode and a pO{sup 2-} indicator electrode. The standard potential of Pu(III)/Pu was determined using cyclic voltammetry. The solubility product of Pu{sub 2}O{sub 3} was calculated by potentiometric titration. The standard potential of Ce(III)/Ce have been determined by a potentiometry method. Potentiometric titrations of Ce(III) have been shown the existence of a soluble cerium oxychloride. All these data allowed us to draw the potential-pO{sup 2-} diagram which summarises the properties of plutonium and cerium compounds in the melt. (authors)

  7. Kainate receptor modulation by sodium and chloride.

    Science.gov (United States)

    Plested, Andrew J R

    2011-01-01

    The kainate-type glutamate receptor displays strong modulation by monovalent anions and cations. This modulation is independent of permeation of the ion channel. Instead, structural, computational and biophysical evidence shows that receptor activity is controlled by binding of sodium and chloride ions at sites that stabilize active dimers of glutamate binding domains. Modulation by monovalent ions is a surprisingly general property across ion channel families. However, evidence of a physiological role for ion-dependent effects on glutamate receptors is lacking, perhaps reflecting the adventitious use of ions as structural components of the kainate receptor. "ergo, Hercules, vita humanior sine sale non quit degree […]" "Heaven known, a civilized life is impossible without salt" -Pliny the Elder, Natural History XXXI 88.

  8. Unsteady growth of ammonium chloride dendrites

    Science.gov (United States)

    Martyushev, L. M.; Terentiev, P. S.; Soboleva, A. S.

    2016-02-01

    Growth of ammonium chloride dendrites from aqueous solution is experimentally investigated. The growth rate υ and the radius ρ of curvature of branches are measured as a function of the relative supersaturation Δ for steady and unsteady growth conditions. It is shown that the experimental results are quantitatively described by the dependences ρ=a/Δ+b, υ=cΔ2, where the factors for primary branches are a=(1.3±0.2)·10-7 m, b=(2.5±0.4)·10-7 m, and c=(2.2±0.3)·10-4 m/s. The factor c is found to be approximately 7 times smaller for the side branches than that for the primary branches.

  9. Estimating the chloride transport in cement paste

    Directory of Open Access Journals (Sweden)

    Princigallo, A.

    2012-06-01

    Full Text Available A method was developed to measure the diffusion coefficient of chloride ions in cement paste based on an analytical solution to Fick’s 2nd law in a cylindrical coordinate system. This natural method yielded diffusivity results within as little as a month. Testing time was reduced by exploiting the three-dimensional inward flux in the specimen. In an attempt to determine the saturation concentration, dense portland cement pastes were exposed to a concentrated chloride solution. The method proved to be useful for exploring cement hydration-induced changes in the diffusion coefficient of cement paste.

    Se ha desarrollado un método para medir el coeficiente de difusión de los iones cloruro en la pasta de cemento, partiendo de una aplicación analítica de la segunda ley de Fick en un sistema de coordinadas cilíndrico. Este método, que es natural, demostró ser capaz de producir resultados de difusividad en tan solo un mes. Se consiguió reducir el tiempo de ensayo mediante el aprovechamiento de la tridimensionalidad del flujo desde el exterior al interior de la probeta. A fin de determinar la concentración de saturación, se sometieron las pastas de cemento Portland a una disolución de cloruros concentrada. Este método resultó ser útil en el estudio de los cambios del coeficiente de difusión de la pasta de cemento provocados por las reacciones de hidratación que tienen lugar en esta.

  10. Behavior and products of mechano-chemical dechlorination of polyvinyl chloride and poly (vinylidene chloride).

    Science.gov (United States)

    Xiao, Xiao; Zeng, Zigao; Xiao, Songwen

    2008-02-28

    The mechano-chemical (MC) dechlorination of polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC) was performed by mechanical milling PVC/PVDC powder with zinc powder in a planetary ball mill, and the products of dechlorination were characterized by Infrared spectra (IR), X-ray diffraction (XRD), Raman spectroscopy, gas chromatography-mass spectrometry (GC-MS), and 13C solid-state nuclear magnetic resonance (NMR). The experimental results show that PVC/PVDC can be easily dechlorinated by milling with zinc powder, and formed various kinds of inorganic and organic products. Inorganic compounds included Zn2OCl(2).2H2O, Zn5(OH)8Cl2.H2O etc., and organic products involved diamond-like carbon, carbyne fragment, polyacetylene etc. Organic products formed following the paths of dechlorination, dehydrochlorination, crosslink, and oxidation. The mechano-chemical dechlorination process of PVC/PVDC may be an effective approach for carbyne synthesizing in the appropriate condition.

  11. Chloride permeability of concrete under static and repeated compressive loading

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Mitsuru; Ishimori, Hiroshi [Kanazawa Inst. of Technology, Ishikawa (Japan)

    1995-05-01

    The chloride permeability of normal weight concrete subjected to static and repeated compressive loading was evaluated by using the AASHTO T277 test method. The results of concrete under static loading showed that the application of loads up to 90% of the ultimate strength had little effect on the chloride permeability. It was found from the results of concrete under repeated loading that load repetitions at the maximum stress levels of 60% or more caused the chloride permeability to increase significantly. The test results also indicated that the chloride permeability of concrete subjected to static and repeated loading increased at an increasing rate with its residual strain. The relation between the chloride permeability obtained and the cracking behavior of concrete previously reported was discussed.

  12. Effects of cyclic chloride exposure on penetration of concrete cover

    Energy Technology Data Exchange (ETDEWEB)

    Hong, K.; Hooton, R.D.

    1999-09-01

    Concretes are in a state of flux between saturated and partially saturated conditions as they undergo continuous cycles of wetting and drying. In saturated concrete, dissolved ions enter through diffusion, whereas in partially saturated concrete, ion-containing fluids are absorbed by capillary suction and concentrated by evaporation of water. The primary focus of this study was to examine the effects of cyclic wetting and drying with sodium chloride solution on chloride ingress into concrete. Chloride profiles of samples exposed to various lengths and numbers of cycles were determined for three mixtures of concrete: two containing slag and/or silica fume with a 0.4 w/cm (water to cementing materials ratio) and one with a 0.3 w/cm. It was found that longer drying times increase the rate of chloride ingress. A good relationship exists between the depth of chloride penetration and the square root of the number of cycles.

  13. Cluster analysis for applications

    CERN Document Server

    Anderberg, Michael R

    1973-01-01

    Cluster Analysis for Applications deals with methods and various applications of cluster analysis. Topics covered range from variables and scales to measures of association among variables and among data units. Conceptual problems in cluster analysis are discussed, along with hierarchical and non-hierarchical clustering methods. The necessary elements of data analysis, statistics, cluster analysis, and computer implementation are integrated vertically to cover the complete path from raw data to a finished analysis.Comprised of 10 chapters, this book begins with an introduction to the subject o

  14. Range-Clustering Queries

    OpenAIRE

    Abrahamsen, Mikkel; de Berg, Mark; Buchin, Kevin; Mehr, Mehran; Mehrabi, Ali D.

    2017-01-01

    In a geometric $k$-clustering problem the goal is to partition a set of points in $\\mathbb{R}^d$ into $k$ subsets such that a certain cost function of the clustering is minimized. We present data structures for orthogonal range-clustering queries on a point set $S$: given a query box $Q$ and an integer $k>2$, compute an optimal $k$-clustering for $S\\setminus Q$. We obtain the following results. We present a general method to compute a $(1+\\epsilon)$-approximation to a range-clustering query, ...

  15. Cluster Decline and Resilience

    DEFF Research Database (Denmark)

    Østergaard, Christian Richter; Park, Eun Kyung

    -2011. Our longitudinal study reveals that technological lock-in and exit of key firms have contributed to impairment of the cluster’s resilience in adapting to disruptions. Entrepreneurship has a positive effect on cluster resilience, while multinational companies have contradicting effects by bringing......Most studies on regional clusters focus on identifying factors and processes that make clusters grow. However, sometimes technologies and market conditions suddenly shift, and clusters decline. This paper analyses the process of decline of the wireless communication cluster in Denmark, 1963...

  16. Management of cluster headache

    DEFF Research Database (Denmark)

    Tfelt-Hansen, Peer C; Jensen, Rigmor H

    2012-01-01

    and agitation. Patients may have up to eight attacks per day. Episodic cluster headache (ECH) occurs in clusters of weeks to months duration, whereas chronic cluster headache (CCH) attacks occur for more than 1 year without remissions. Management of cluster headache is divided into acute attack treatment....... In drug-resistant CCH, neuromodulation with either occipital nerve stimulation or deep brain stimulation of the hypothalamus is an alternative treatment strategy. For most cluster headache patients there are fairly good treatment options both for acute attacks and for prophylaxis. The big problem...

  17. Determination of the heat capacities of Lithium/BCX (bromide chloride in thionyl chloride) batteries

    Science.gov (United States)

    Kubow, Stephen A.; Takeuchi, Kenneth J.; Takeuchi, Esther S.

    1989-12-01

    Heat capacities of twelve different Lithium/BCX (BrCl in thionyl chloride) batteries in sizes AA, C, D, and DD were determined. Procedures and measurement results are reported. The procedure allowed simple, reproducible, and precise determinations of heat capacities of industrially important Lithium/BCX cells, without interfering with performance of the cells. Use of aluminum standards allowed the accuracy of the measurements to be maintained. The measured heat capacities were within 5 percent of calculated heat capacity values.

  18. Mechanisms of solvolyses of acid chlorides and chloroformates. Chloroacetyl and phenylacetyl chloride as similarity models.

    Science.gov (United States)

    Bentley, T William; Harris, H Carl; Ryu, Zoon Ha; Lim, Gui Taek; Sung, Dae Dong; Szajda, Stanley R

    2005-10-28

    [reaction: see text] Rate constants and product selectivities (S = ([ester product]/[acid product]) x ([water]/[alcohol solvent]) are reported for solvolyses of chloroacetyl chloride (3) at -10 degrees C and phenylacetyl chloride (4) at 0 degrees C in ethanol/ and methanol/water mixtures. Additional kinetic data are reported for solvolyses in acetone/water, 2,2,2-trifluoroethanol(TFE)/water, and TFE/ethanol mixtures. Selectivities and solvent effects for 3, including the kinetic solvent isotope effect (KSIE) of 2.18 for methanol, are similar to those for solvolyses of p-nitrobenzoyl chloride (1, Z = NO(2)); rate constants in acetone/water are consistent with a third-order mechanism, and rates and products in ethanol/ and methanol/water mixtures can be explained quantitatively by competing third-order mechanisms in which one molecule of solvent (alcohol or water) acts as a nucleophile and another acts as a general base (an addition/elimination reaction channel). Selectivities increase for 3 as water is added to alcohol. Solvent effects on rate constants for solvolyses of 3 are very similar to those of methyl chloroformate, but acetyl chloride shows a lower KSIE, and a higher sensitivity to solvent-ionizing power, explained by a change to an S(N)2/S(N)1 (ionization) reaction channel. Solvolyses of 4 undergo a change from the addition/elimination channel in ethanol to the ionization channel in aqueous ethanol (<80% v/v alcohol). The reasons for change in reaction channels are discussed in terms of the gas-phase stabilities of acylium ions, calculated using Gaussian 03 (HF/6-31G(d), B3LYP/6-31G(d), and B3LYP/6-311G(d,p) MO theory).

  19. PHASE EQUILIBRIUM FOR THE TERNARY SYSTEM VINYL CHLORIDE-CHLORINATED POLYETHYLENE-POLY (VINYL CHLORIDE)

    Institute of Scientific and Technical Information of China (English)

    LOU Jianfeng; WENG Zhixue; HUANG Zhiming; PAN Zuren

    1991-01-01

    Swelling capacity of vinyl chloride (VC) in chlorinated polyethylene (CPE) with 25- 40 wt% Cl at temperature 30- 57 ℃ was studied and their relationships were correlated with Langmuir and Freundlich adsorption equations. A ternary phase diagram for VC-CPE-PVC was also established.In-situ polymerization conditions of CPE-g -VC were proposed and CPE content control was analyzed for the manufacturing process of CPE-g-VC graft product based on results of phase equilibrium study.

  20. Genetically encoded optical sensors for monitoring of intracellular chloride and chloride-selective channel activity

    Directory of Open Access Journals (Sweden)

    Piotr Bregestovski

    2009-12-01

    Full Text Available This review briefly discusses the main approaches for monitoring chloride (Cl−, the most abundant physiological anion. Noninvasive monitoring of intracellular Cl− ([Cl−]i is a challenging task owing to two main difficulties: (i the low transmembrane ratio for Cl−, approximately 10:1; and (ii the small driving force for Cl−, as the Cl− reversal potential (ECl is usually close to the resting potential of the cells. Thus, for reliable monitoring of intracellular Cl−, one has to use highly sensitive probes. From several methods for intracellular Cl− analysis, genetically encoded chloride indicators represent the most promising tools. Recent achievements in the development of genetically encoded chloride probes are based on the fact that yellow fluorescent protein (YFP exhibits Cl−-sensitivity. YFP-based probes have been successfully used for quantitative analysis of Cl− transport in different cells and for high-throughput screening of modulators of Cl−-selective channels. Development of a ratiometric genetically encoded probe, Clomeleon, has provided a tool for noninvasive estimation of intracellular Cl− concentrations. While the sensitivity of this protein to Cl− is low (EC50 about 160 mM, it has been successfully used for monitoring intracellular Cl− in different cell types. Recently a CFP–YFP-based probe with a relatively high sensitivity to Cl− (EC50 about 30 mM has been developed. This construct, termed Cl-Sensor, allows ratiometric monitoring using the fluorescence excitation ratio. Of particular interest are genetically encoded probes for monitoring of ion channel distribution and activity. A new molecular probe has been constructed by introducing into the cytoplasmic domain of the Cl−-selective glycine receptor (GlyR channel the CFP–YFP-based Cl-Sensor. This construct, termed BioSensor-GlyR, has been successfully expressed in cell lines. The new genetically encoded chloride probes offer means of screening

  1. Optical, thermal and magnetic studies of pure and cobalt chloride doped L-alanine cadmium chloride

    Science.gov (United States)

    Benila, B. S.; Bright, K. C.; Delphine, S. Mary; Shabu, R.

    2017-03-01

    Single crystals of L-alanine cadmium chloride (LACC) and cobalt chloride (Co2+) doped LACC have been grown by the slow evaporation solution growth technique. The grown crystals were subjected to various characterizations such as powder XRD, SXRD, FTIR, UV-vis, EDAX, TG/DTA, VSM, Dielectric and Second Harmonic Generation (SHG) measurements. The lattice parameters of the grown crystals were determined by single crystal X-ray analysis. EDAX analysis confirms the presence of Co2+ ion in the host material. The functional group and optical behavior of the crystals were identified from FTIR and UV-vis spectrum analysis. Electrical parameters such as dielectric constant, dielectric loss have been studied. The thermal stability of the compound was found out using TGA/DTA analysis. Second Harmonic Generation of the samples was confirmed by Kurtz-Perry powder technique. Magnetic properties of the crystals studied by VSM were also reported. The encouraging results show that the cobalt chloride doped LACC crystals have greater potential applications in optical devices.

  2. Clusters in nuclei

    CERN Document Server

    Following the pioneering discovery of alpha clustering and of molecular resonances, the field of nuclear clustering is today one of those domains of heavy-ion nuclear physics that faces the greatest challenges, yet also contains the greatest opportunities. After many summer schools and workshops, in particular over the last decade, the community of nuclear molecular physicists has decided to collaborate in producing a comprehensive collection of lectures and tutorial reviews covering the field. This third volume follows the successful Lect. Notes Phys. 818 (Vol. 1) and 848 (Vol. 2), and comprises six extensive lectures covering the following topics:  - Gamma Rays and Molecular Structure - Faddeev Equation Approach for Three Cluster Nuclear Reactions - Tomography of the Cluster Structure of Light Nuclei Via Relativistic Dissociation - Clustering Effects Within the Dinuclear Model : From Light to Hyper-heavy Molecules in Dynamical Mean-field Approach - Clusterization in Ternary Fission - Clusters in Light N...

  3. Spatial cluster modelling

    CERN Document Server

    Lawson, Andrew B

    2002-01-01

    Research has generated a number of advances in methods for spatial cluster modelling in recent years, particularly in the area of Bayesian cluster modelling. Along with these advances has come an explosion of interest in the potential applications of this work, especially in epidemiology and genome research. In one integrated volume, this book reviews the state-of-the-art in spatial clustering and spatial cluster modelling, bringing together research and applications previously scattered throughout the literature. It begins with an overview of the field, then presents a series of chapters that illuminate the nature and purpose of cluster modelling within different application areas, including astrophysics, epidemiology, ecology, and imaging. The focus then shifts to methods, with discussions on point and object process modelling, perfect sampling of cluster processes, partitioning in space and space-time, spatial and spatio-temporal process modelling, nonparametric methods for clustering, and spatio-temporal ...

  4. Unconventional methods for clustering

    Science.gov (United States)

    Kotyrba, Martin

    2016-06-01

    Cluster analysis or clustering is a task of grouping a set of objects in such a way that objects in the same group (called a cluster) are more similar (in some sense or another) to each other than to those in other groups (clusters). It is the main task of exploratory data mining and a common technique for statistical data analysis used in many fields, including machine learning, pattern recognition, image analysis, information retrieval, and bioinformatics. The topic of this paper is one of the modern methods of clustering namely SOM (Self Organising Map). The paper describes the theory needed to understand the principle of clustering and descriptions of algorithm used with clustering in our experiments.

  5. Comparative effects of hydrogen chloride gas on tomato and chrysanthemum. I. Distribution and accumulation of chloride following exposure. II. Pathological anatomy of hydrogen chloride gas injury

    Energy Technology Data Exchange (ETDEWEB)

    Shriner, D.S.

    1969-01-01

    Hydrogen chloride (HCl) gas damage to plants has not been a historically important problem. However, recent practices in a number of industries, particularly glass manufacturing and pyrolysis of waste plastics, have increased the seriousness of the problem. Studies were carried out under carefully controlled exposure conditions to determine the effects of HCl gas on a relatively sensitive and a relatively resistant plant species. The macroscopic symptoms of most importance in acute damage to tomato and chrysanthemum are glazing of the lower surface, and a bifacial bronzing of interveinal and marginal areas of leaves. Microscopically, glazing was shown to be caused by a collapse of the lower epidermal cells and a partial disorganization of the spongy mesophyll of leaves. Bronzing was shown to be caused by the further collapse of the spongy mesophyll, and in some cases the palisade mesophyll and upper epidermis. Analysis of plant tissues for their free chloride content following an exposure to HCl gas was done with cell-free water extracts which were titrated on an automatic chloride titrator. On the basis of such studies, evidence suggest that the mechanism of accumulation of chlorides in plants is similar to that of fluorides, and that in subacute doses, chlorides are translocated toward the extremities of the foliar portions of the plant. In areas where a number of different types of pollution sources exist, and symptomotology is not definitive in pinpointing the source, chloride analysis of plant tissues should prove valuable as an aid to diagnosis if HCl gas was suspected.

  6. Acute lethal and teratogenic effects of tributyltin chloride and copper chloride on mahi mahi (Coryphaena hippurus) eggs and larvae.

    Science.gov (United States)

    Adema-Hannes, Rachel; Shenker, Jonathan

    2008-10-01

    Acute and chronic bioassays were used to evaluate the lethal and sublethal effects of copper chloride and tributyltin chloride on mahi mahi (Coryphaena hippurus) embryos, a pelagic life stage often found in the surface microlayer where anthropogenic contaminants can accumulate. Acute bioassay testing determined the median lethal concentration (LC50) for the test organism after 48 h of exposure. Chronic toxicity tests were used to determine the measurement of sublethal parameters, such as developmental abnormalities after 72-h exposures to the toxicants. Embryos were collected 4 h postfertilization and subsequently exposed to 1, 5, 25, 50, and 100 microg/L of copper chloride and 3, 10, 20, 30, and 50 microg/L of tributyltin chloride. Analysis of hatch rate percentage determined that the mean 48-h LC50 of copper chloride and tributyltin chloride was 32.8 and 16.7 microg/L, respectively, based on the pooled data of four experiments with four replicates for each metal. Consistent abnormalities, such as yolk sac swelling, spinal deformities, and decreased hatch rates, were observed for each metal. Teratogenic responses to copper chloride and tributyltin chloride demonstrate the need to investigate further the impacts of pollution in the open oceans to a species indigenous to, and commercially important to, the Florida (USA) coasts. This information could then lead to the future development of a surface microlayer bioassay using mahi mahi embryos.

  7. CLEAN: CLustering Enrichment ANalysis

    Directory of Open Access Journals (Sweden)

    Medvedovic Mario

    2009-07-01

    Full Text Available Abstract Background Integration of biological knowledge encoded in various lists of functionally related genes has become one of the most important aspects of analyzing genome-wide functional genomics data. In the context of cluster analysis, functional coherence of clusters established through such analyses have been used to identify biologically meaningful clusters, compare clustering algorithms and identify biological pathways associated with the biological process under investigation. Results We developed a computational framework for analytically and visually integrating knowledge-based functional categories with the cluster analysis of genomics data. The framework is based on the simple, conceptually appealing, and biologically interpretable gene-specific functional coherence score (CLEAN score. The score is derived by correlating the clustering structure as a whole with functional categories of interest. We directly demonstrate that integrating biological knowledge in this way improves the reproducibility of conclusions derived from cluster analysis. The CLEAN score differentiates between the levels of functional coherence for genes within the same cluster based on their membership in enriched functional categories. We show that this aspect results in higher reproducibility across independent datasets and produces more informative genes for distinguishing different sample types than the scores based on the traditional cluster-wide analysis. We also demonstrate the utility of the CLEAN framework in comparing clusterings produced by different algorithms. CLEAN was implemented as an add-on R package and can be downloaded at http://Clusteranalysis.org. The package integrates routines for calculating gene specific functional coherence scores and the open source interactive Java-based viewer Functional TreeView (FTreeView. Conclusion Our results indicate that using the gene-specific functional coherence score improves the reproducibility of the

  8. Survey on Text Document Clustering

    OpenAIRE

    M.Thangamani; Dr.P.Thangaraj

    2010-01-01

    Document clustering is also referred as text clustering, and its concept is merely equal to data clustering. It is hardly difficult to find the selective information from an ‘N’number of series information, so that document clustering came into picture. Basically cluster means a group of similar data, document clustering means segregating the data into different groups of similar data. Clustering can be of mathematical, statistical or numerical domain. Clustering is a fundamental data analysi...

  9. Agricultural Clusters in the Netherlands

    NARCIS (Netherlands)

    Schouten, M.A.; Heijman, W.J.M.

    2012-01-01

    Michael Porter was the first to use the term cluster in an economic context. He introduced the term in The Competitive Advantage of Nations (1990). The term cluster is also known as business cluster, industry cluster, competitive cluster or Porterian cluster. This article aims at determining and

  10. Agricultural Clusters in the Netherlands

    NARCIS (Netherlands)

    Schouten, M.A.; Heijman, W.J.M.

    2012-01-01

    Michael Porter was the first to use the term cluster in an economic context. He introduced the term in The Competitive Advantage of Nations (1990). The term cluster is also known as business cluster, industry cluster, competitive cluster or Porterian cluster. This article aims at determining and mea

  11. Agricultural Clusters in the Netherlands

    NARCIS (Netherlands)

    Schouten, M.A.; Heijman, W.J.M.

    2012-01-01

    Michael Porter was the first to use the term cluster in an economic context. He introduced the term in The Competitive Advantage of Nations (1990). The term cluster is also known as business cluster, industry cluster, competitive cluster or Porterian cluster. This article aims at determining and mea

  12. An Apical-Membrane Chloride Channel in Human Tracheal Epithelium

    Science.gov (United States)

    Welsh, Michael J.

    1986-06-01

    The mechanism of chloride transport by airway epithelia has been of substantial interest because airway and sweat gland-duct epithelia are chloride-impermeable in cystic fibrosis. The decreased chloride permeability prevents normal secretion by the airway epithelium, thereby interfering with mucociliary clearance and contributing to the morbidity and mortality of the disease. Because chloride secretion depends on and is regulated by chloride conductance in the apical cell membrane, the patch-clamp technique was used to directly examine single-channel currents in primary cultures of human tracheal epithelium. The cells contained an anion-selective channel that was not strongly voltage-gated or regulated by calcium in cell-free patches. The channel was also blocked by analogs of carboxylic acid that decrease apical chloride conductance in intact epithelia. When attached to the cell, the channel was activated by isoproterenol, although the channel was also observed to open spontaneously. However, in some cases, the channel was only observed after the patch was excised from the cell. These results suggest that this channel is responsible for the apical chloride conductance in airway epithelia.

  13. Chloride penetration into concrete under simulated field conditions

    Energy Technology Data Exchange (ETDEWEB)

    Motohashi, K.; Misra, S.; Yamamoto, A. (Kajima Corp., Tokyo (Japan))

    1991-10-31

    The purpose of this study is to clarify the effect of field conditions such curing period, slump, maximum size of aggregate, etc. on chloride penetration into concrete. With a view to closely simulate the field conditions, all specimens were exposed to chloride attack for five days after casting. From the preliminary results obtained after a six month immersion in 3.3% NaCl solution, higher degrees of chloride ingress were observed in cases when the concrete was prematurely exposed to chloride attack or had a higher slump. In addition, apart from properties, such as water-cement ratio, etc., the relative orientation of the direction of penetration to that of casting, the mortar content of the mix, and the properties of the transition zone between the coarse aggregate and mortar were found to affect the diffusivity of the chloride. Under a limited number of conditions, soluble chloride content was also illustrated in addition to the total chlorides. 10 refs., 6 figs., 6 tabs.

  14. Studies on Hypokalemia Induced by Trimethyltin Chloride

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    To determine the possible relationship between plasma potassium concentration and severity of acute trimethyltin chloride (TMT) poisoning and to assess the mechanism of TMT induced hypokalemia. Methods SD rats were treated with various dosages of TMT (ip). All the indices were measured and analysed for determing their possible relations with plasma K+. Results With increase of dosage, the plasma K+ level dropped rapidly, and deaths appeared more quickly. The LDs0 of TMT (ip) was 14.7 mg/kgbw. In the low dosage group (10 mg/kgbw), the plasma K+ level dropped slowly with the lowest dosage on day 6 (4.85 mmol/L). It rose again on day 11 (5.06 mmol/L), and recoverd on day 28. The poisoning signs corresponded with decline of the span of K+ level. The plasma Na+ level dropped half an hour after TMT treatment, but recovered 24 h later. In the high dosage group (46.4 mg/kgbw), the levels of plasma K+ and Na+ fell rapidly within half an hour (P<0.05), the intracellular potassium concentration of RBC did not decrerase obviously (P>0.05), the activities of Na+-K+-ATPase and Mg2+-ATPase in RBC membrane were depressed remarkably (P<0.01, P<0.05, respectively), the plasma aldosterone concentrations rose as high as tenfold (P<0.01), the arterial blood pH fell from 7.434 to 7.258 (P<0.01),pCO2 was raised from 29.62 to 45.33 mmHg (P<0.01). In the 24 h urine test, when rats were treated with TMT (21.5 mg/kgbw, ip), urine volume, urinary potassium, sodium and chloride increased significantly in comparison with those in the controls (P<0.01). Conclusion TMT could induce hypokalemia in SD rats. The available evidence suggests that TMT can induce acute renal leakage of potassium. At the same time, a significant rise of plasma aldosterone may play an important role in promoting potassium leakage from kidney to result in severe hypokalemia with inhaling acid-base abnormalities produced, which aggravate the poisoning symptoms. In the end the rats would die of respiratory

  15. Acetogenic microbial degradation of vinyl chloride

    Science.gov (United States)

    Bradley, P.M.; Chapelle, F.H.

    2000-01-01

    Under methanogenic conditions, microbial degradation of [1,2-14C]vinyl chloride (VC) resulted in significant (14 ?? 3% maximum recovery) but transient recovery of radioactivity as 14C-acetate. Subsequently, 14C- acetate was degraded to 14CH4 and 14CO2 (18 ?? 2% and 54 ?? 3% final recoveries, respectively). In contrast, under 2-bromoethanesulfonic acid (BES) amended conditions, 14C-acetate recovery remained high (27 ?? 1% maximum recovery) throughout the study, no 14CH4 was produced, and the final recovery of 14CO2 was only 35 ?? 4%. These results demonstrate that oxidative acetogenesis may be an important mechanism for anaerobic VC biodegradation. Moreover, these results (1) demonstrate that microbial degradation of VC to CH4 and CO2 may involve oxidative acetogenesis followed by acetotrophic methanogenesis and (2) suggest that oxidative acetogenesis may be the initial step in the net oxidation of VC to CO2 reported previously under Fe(III)-reducing, SO4-reducing, and humic acids- reducing conditions.Under methanogenic conditions, microbial degradation of [1,2-14C]vinyl chloride (VC) resulted in significant (14 ?? 3% maximum recovery) but transient recovery of radioactivity as 14C-acetate. Subsequently, 14C-acetate was degraded to 14CH4 and 14CO2 (18 ?? 2% and 54 ?? 3% final recoveries respectively). In contrast, under 2-bromoethanesulfonic acid (BES) amended conditions, 14C-acetate recovery remained high (27 ?? 1% maximum recovery) throughout the study, no 14CH4 was produced, and the final recovery of 14CO2 was only 35 ?? 4%. These results demonstrate that oxidative acetogenesis may be an important mechanism for anaerobic VC biodegradation. Moreover, these results (1) demonstrate that microbial degradation of VC to CH4 and CO2 may involve oxidative acetogenesis followed by acetotrophic methanogenesis and (2) suggest that oxidative acetogenesis may be the initial step in the net oxidation of VC to CO2 reported previously under Fe(III)-reducing, SO4-reducing, and

  16. Memristive Properties of Thin Film Cuprous Oxide

    Science.gov (United States)

    2011-03-01

    Banerjee and D Chakravorty, "Optical absorption by nanoparticles of Cu2O," Europhysics Letters , vol. 52, no. 4, pp. 468-473, November 2000. [20] Gunter...Kotsugi, "Inhomogeneous chemical states in resistance-switching devices with a planar-type Pt/CuO/Pt structure," Applied Physics Letters , vol. 95, p...11] R Dong et al., "Reproducible hysteresis and resistive switching in metal-CuxO- metal," Applied Physics Letters , vol. 90, p. 042107, 2007. [12

  17. CSR in Industrial Clusters

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Pillay, Renginee G.

    2012-01-01

    Purpose – The paper seeks to review the literature on CSR in industrial clusters in developing countries, identifying the main strengths, weaknesses, and gaps in this literature, pointing to future research directions and policy implications in the area of CSR and industrial cluster development...... in this field and their comments incorporated in the final version submitted to Corporate Governance. Findings – The article traces the origins of the debate on industrial clusters and CSR in developing countries back to the early 1990s when clusters began to be seen as an important vehicle for local economic...... development in the South. At the turn of the millennium the industrial cluster debate expanded as clusters were perceived as a potential source of poverty reduction, while their role in promoting CSR among small and medium-sized enterprises began to take shape from 2006 onwards. At present, there is still...

  18. Cosmology with cluster surveys

    Indian Academy of Sciences (India)

    Subhabrata Majumdar

    2004-10-01

    Surveys of clusters of galaxies provide us with a powerful probe of the density and nature of the dark energy. The red-shift distribution of detected clusters is highly sensitive to the dark energy equation of state parameter . Upcoming Sunyaev–Zel'dovich (SZ) surveys would provide us large yields of clusters to very high red-shifts. Self-calibration of cluster scaling relations, possible for such a huge sample, would be able to constrain systematic biases on mass estimators. Combining cluster red-shift abundance with limited mass follow-up and cluster mass power spectrum can then give constraints on , as well as on 8 and to a few per cents.

  19. Disentangling Porterian Clusters

    DEFF Research Database (Denmark)

    Jagtfelt, Tue

    This dissertation investigates the contemporary phenomenon of industrial clusters based on the work of Michael E. Porter, the central progenitor and promoter of the cluster notion. The dissertation pursues two central questions: 1) What is a cluster? and 2) How could Porter’s seemingly fuzzy......, contested theory become so widely disseminated and applied as a normative and prescriptive strategy for economic development? The dissertation traces the introduction of the cluster notion into the EU’s Lisbon Strategy and demonstrates how its inclusion originates from Porter’s colleagues: Professor Örjan...... Sölvell, Dr. Christian Ketels and Dr. Göran Lindqvist. Taking departure in Porter’s works and the cluster literature, the dissertations shows a considerable paradigmatic shift has occurred from the first edition of Nations to the present state of cluster cooperation. To elaborate on this change...

  20. Melting of sodium clusters

    CERN Document Server

    Reyes-Nava, J A; Beltran, M R; Michaelian, K

    2002-01-01

    Thermal stability properties and the melting-like transition of Na_n, n=13-147, clusters are studied through microcanonical molecular dynamics simulations. The metallic bonding in the sodium clusters is mimicked by a many-body Gupta potential based on the second moment approximation of a tight-binding Hamiltonian. The characteristics of the solid-to-liquid transition in the sodium clusters are analyzed by calculating physical quantities like caloric curves, heat capacities, and root-mean-square bond length fluctuations using simulation times of several nanoseconds. Distinct melting mechanisms are obtained for the sodium clusters in the size range investigated. The calculated melting temperatures show an irregular variation with the cluster size, in qualitative agreement with recent experimental results. However, the calculated melting point for the Na_55 cluster is about 40 % lower than the experimental value.

  1. Online Correlation Clustering

    CERN Document Server

    Mathieu, Claire; Schudy, Warren

    2010-01-01

    We study the online clustering problem where data items arrive in an online fashion. The algorithm maintains a clustering of data items into similarity classes. Upon arrival of v, the relation between v and previously arrived items is revealed, so that for each u we are told whether v is similar to u. The algorithm can create a new cluster for v and merge existing clusters. When the objective is to minimize disagreements between the clustering and the input, we prove that a natural greedy algorithm is O(n)-competitive, and this is optimal. When the objective is to maximize agreements between the clustering and the input, we prove that the greedy algorithm is .5-competitive; that no online algorithm can be better than .834-competitive; we prove that it is possible to get better than 1/2, by exhibiting a randomized algorithm with competitive ratio .5+c for a small positive fixed constant c.

  2. Cluster Management Institutionalization

    DEFF Research Database (Denmark)

    Normann, Leo; Agger Nielsen, Jeppe

    2015-01-01

    This article explores a new management form – cluster management – in Danish public sector day care. Although cluster management has been widely adopted in Danish day care at the municipality level, it has attracted only sparse research attention. We use theoretical insights from Scandinavian...... institutionalism together with a longitudinal case-based inquiry into how cluster management has entered and penetrated the management practices of day care in Denmark. We demonstrate how cluster management became widely adopted in the day care field not only because of its intrinsic properties but also because...... of how it was legitimized as a “ready-to-use” management model. Further, our account reveals how cluster management translated into considerably different local variants as it travelled into specific organizations. However, these processes have not occurred sequentially with cluster management first...

  3. Cluster Correspondence Analysis.

    Science.gov (United States)

    van de Velden, M; D'Enza, A Iodice; Palumbo, F

    2017-03-01

    A method is proposed that combines dimension reduction and cluster analysis for categorical data by simultaneously assigning individuals to clusters and optimal scaling values to categories in such a way that a single between variance maximization objective is achieved. In a unified framework, a brief review of alternative methods is provided and we show that the proposed method is equivalent to GROUPALS applied to categorical data. Performance of the methods is appraised by means of a simulation study. The results of the joint dimension reduction and clustering methods are compared with the so-called tandem approach, a sequential analysis of dimension reduction followed by cluster analysis. The tandem approach is conjectured to perform worse when variables are added that are unrelated to the cluster structure. Our simulation study confirms this conjecture. Moreover, the results of the simulation study indicate that the proposed method also consistently outperforms alternative joint dimension reduction and clustering methods.

  4. Cluster Management Institutionalization

    DEFF Research Database (Denmark)

    Normann, Leo; Agger Nielsen, Jeppe

    2015-01-01

    of how it was legitimized as a “ready-to-use” management model. Further, our account reveals how cluster management translated into considerably different local variants as it travelled into specific organizations. However, these processes have not occurred sequentially with cluster management first......This article explores a new management form – cluster management – in Danish public sector day care. Although cluster management has been widely adopted in Danish day care at the municipality level, it has attracted only sparse research attention. We use theoretical insights from Scandinavian...... institutionalism together with a longitudinal case-based inquiry into how cluster management has entered and penetrated the management practices of day care in Denmark. We demonstrate how cluster management became widely adopted in the day care field not only because of its intrinsic properties but also because...

  5. Clustering Categorical Data:A Cluster Ensemble Approach

    Institute of Scientific and Technical Information of China (English)

    He Zengyou(何增友); Xu Xiaofei; Deng Shengchun

    2003-01-01

    Clustering categorical data, an integral part of data mining,has attracted much attention recently. In this paper, the authors formally define the categorical data clustering problem as an optimization problem from the viewpoint of cluster ensemble, and apply cluster ensemble approach for clustering categorical data. Experimental results on real datasets show that better clustering accuracy can be obtained by comparing with existing categorical data clustering algorithms.

  6. Spatial Scan Statistic: Selecting clusters and generating elliptic clusters

    DEFF Research Database (Denmark)

    Christiansen, Lasse Engbo; Andersen, Jens Strodl

    2004-01-01

    The spatial scan statistic is widely used to search for clusters. This paper shows that the usually applied elimination of overlapping clusters to find secondary clusters is sensitive to smooth changes in the shape of the clusters. We present an algorithm for generation of set of confocal elliptic...... clusters. In addition, we propose a new way to present the information in a given set of clusters based on the significance of the clusters....

  7. Stochastic Modeling of Reinforced Concrete Structures Exposed to Chloride Attack

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Frier, Christian

    2003-01-01

    concentration and reinforcement cover depth are modeled by stochastic fields. The paper contains a description of the parameters to be included in a stochastic model and a proposal for the information needed to obtain values for the parameters in order to be ab le to perform reliability investigations...... the reinforcement exceeds a critical threshold value. In the present paper a stochastic model is described by which the chloride content in a reinforced concrete structure can be estimated. The chloride ingress is modeled by a 2-dimensional diffusion process and the diffusion coefficient, surface chloride...

  8. Chloride ion erosion experiment research in cracked concrete

    Science.gov (United States)

    Ting, Shu; Yang, Li

    2017-08-01

    For the study of chloride ion erosion in cracked concrete, this essay tries to take advantages of relevant trails to build up concrete chloride ion diffusion model based on the Fick’s second law. The parameter of this model is easy to be set, and many factors such as the effect of cracks are taken into consideration in this experiment. The concept of “chloride ion diffusion coefficient of equivalent apparent” is introduced to simplify the calculation. It can help simplify the calculation process, and get a more accurate test result, as well as facilitating the practical application of this parameter.

  9. Calcium chloride in stabilised soil roads and runways

    Directory of Open Access Journals (Sweden)

    Harsh Vardhan

    1952-09-01

    Full Text Available Mudless, dustless, hard and all weather driving surfaces is a serious requirement of the forces.  surfacing by mixtures of definite amounts of locally available stone, gravel, sand, clay and Silt to which calculated amount of calcium chloride is added quickly compact and ultimately harden like concrete. This provides an easy, quick and economic- means of meeting the requirement.  Necessity of such surfaces, use and action of calcium chloride and resulting effects are discussed. Different methods of construction and application of calcium chloride are briefly related.

  10. The ionic product of water in concentrated tetramethylammonium chloride solutions.

    Science.gov (United States)

    Sipos, P; Bódi, I; May, P M; Hefter, G T

    1997-04-01

    The ionic product of water, pK(w) = - log[H(+)][OH(-)] has been determined in aqueous solutions of tetramethylammonium chloride over the concentration range of 0.1-5.5 M at 25 degrees C using high-precision glass electrode potentiometric titrations. pK(w) data relating to aqueous potassium and sodium chlorides at ionic strengths up to 5 M are markedly lower than the tetramethylammonium chloride results. These differences are almost certainly due to weak associations between potassium and (especially) sodium and hydroxide ions.

  11. Ionometric determination of chloride ion in circulating and waste waters

    Energy Technology Data Exchange (ETDEWEB)

    Bebeshko, G.I.; Afanas' eva, V.I.; Danielova, I.I.; Dmitriev, M.A.; Radchenko, A.F.

    1986-09-01

    The authors attempt to develop selective ionometric methods to determine chloride ion in waste and circulating waters from technological ore processing, containing significant amounts of sulfide ion and various flotation reagents. These waters contain practically no cations that form hard to dissolve compounds with chloride ion such as Ag/sup +/, Cu/sup +/, Hg/sup +/ or Pb/sup 2 +/. The chloride ion concentration in water varies between 10 and 100 mg/liter. Information is shown on the concentration of the main anions and flotation reagents in waters that were analyzed.

  12. Method for the production of uranium chloride salt

    Science.gov (United States)

    Westphal, Brian R.; Mariani, Robert D.

    2013-07-02

    A method for the production of UCl.sub.3 salt without the use of hazardous chemicals or multiple apparatuses for synthesis and purification is provided. Uranium metal is combined in a reaction vessel with a metal chloride and a eutectic salt- and heated to a first temperature under vacuum conditions to promote reaction of the uranium metal with the metal chloride for the production of a UCl.sub.3 salt. After the reaction has run substantially to completion, the furnace is heated to a second temperature under vacuum conditions. The second temperature is sufficiently high to selectively vaporize the chloride salts and distill them into a condenser region.

  13. Microwave evaluation of accelerated chloride ingress in mortar

    Science.gov (United States)

    Hu, C.; Case, T.; Castle, M.; Zoughi, R.; Kurtis, K.

    2001-04-01

    Corrosion of steel in reinforced concrete structures can be induced by the presence of chloride ions near the steel/concrete interface. To show the potential of microwave nondestructive testing techniques for evaluating chloride ingress, 8″×8″×8″ mortar specimens with different mixture designs were prepared. To accelerate chloride ingress, they were exposed to cyclical wet/dry conditions, where the wet condition included exposure to salt bath. A complete discussion of the results will be presented in this paper.

  14. Denitrification of fertilizer wastewater at high chloride concentration

    DEFF Research Database (Denmark)

    Ucisik, Ahmed Süheyl; Henze, Mogens

    g/l. The results of the experiments showed that biological denitrification was feasible at the extreme environmental conditions prevailing in fertilizer wastewater. Stable continuous biological denitrfication of the synthetic high chloride wastewater was performed up to 77.4 g Cl/l at 37 degree C......Wastewater from fertilizer industry is characterized by high contents of chloride concentration, which normally vary between 60 and 76 g/l. Experiments with bilogical denitrification were performed in lab-scale "fill and draw" reactors with synthetic wastewater with chloride concentrations up to 77.4...

  15. Molten Triazolium Chloride Systems as New Aluminum Battery Electrolytes

    DEFF Research Database (Denmark)

    Vestergaard, B.; Bjerrum, Niels; Petrushina, Irina

    1993-01-01

    The possibility of using molten mixtures of 1,4-dimethyl-1,2,4-triazolium chloride (DMTC) and aluminum chloride (AlCl3) as secondary battery electrolytes was studied, in some cases extended by the copresence of sodium chloride. DMTC-AlCl, mixtures demonstrated high specific conductivity in a wide...... of milliamperes per square centimeter) was observed at 0.344 V on the acidic sodium tetrachloroaluminate background, involving a free triazolium radical mechanism. Molten DMTC-AlCl3 electrolytes are acceptable for battery performance and both the aluminum anode and the triazolium electrolyte can be used as active...

  16. Clustering of Absorbers

    CERN Document Server

    Cristiani, S; D'Odorico, V; Fontana, A; Giallongo, E; Moscardini, L; Savaglio, S

    1997-01-01

    The observed clustering of Lyman-$\\alpha$ lines is reviewed and compared with the clustering of CIV systems. We argue that a continuity of properties exists between Lyman-$\\alpha$ and metal systems and show that the small-scale clustering of the absorbers is consistent with a scenario of gravitationally induced correlations. At large scales statistically significant over and under-densities (including voids) are found on scales of tens of Mpc.

  17. Clustering Techniques in Bioinformatics

    Directory of Open Access Journals (Sweden)

    Muhammad Ali Masood

    2015-01-01

    Full Text Available Dealing with data means to group information into a set of categories either in order to learn new artifacts or understand new domains. For this purpose researchers have always looked for the hidden patterns in data that can be defined and compared with other known notions based on the similarity or dissimilarity of their attributes according to well-defined rules. Data mining, having the tools of data classification and data clustering, is one of the most powerful techniques to deal with data in such a manner that it can help researchers identify the required information. As a step forward to address this challenge, experts have utilized clustering techniques as a mean of exploring hidden structure and patterns in underlying data. Improved stability, robustness and accuracy of unsupervised data classification in many fields including pattern recognition, machine learning, information retrieval, image analysis and bioinformatics, clustering has proven itself as a reliable tool. To identify the clusters in datasets algorithm are utilized to partition data set into several groups based on the similarity within a group. There is no specific clustering algorithm, but various algorithms are utilized based on domain of data that constitutes a cluster and the level of efficiency required. Clustering techniques are categorized based upon different approaches. This paper is a survey of few clustering techniques out of many in data mining. For the purpose five of the most common clustering techniques out of many have been discussed. The clustering techniques which have been surveyed are: K-medoids, K-means, Fuzzy C-means, Density-Based Spatial Clustering of Applications with Noise (DBSCAN and Self-Organizing Map (SOM clustering.

  18. Structures in Galaxy Clusters

    CERN Document Server

    Escalera, E; Girardi, M; Giuricin, G; Mardirossian, F; Mazure, A; Mezzetti, M

    1993-01-01

    The analysis of the presence of substructures in 16 well-sampled clusters of galaxies suggests a stimulating hypothesis: Clusters could be classified as unimodal or bimodal, on the basis of to the sub-clump distribution in the {\\em 3-D} space of positions and velocities. The dynamic study of these clusters shows that their fundamental characteristics, in particular the virial masses, are not severely biased by the presence of subclustering if the system considered is bound.

  19. Chloride, bromide and iodide scintillators with europium

    Science.gov (United States)

    Zhuravleva, Mariya; Yang, Kan

    2016-09-27

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  20. Piezoresistive Properties of Polyvinyl Chloride Composites

    Science.gov (United States)

    Toprakci, Hatice Aylin Karahan

    Textile based sensors provide an interface between the user and the electronic system by converting any type of physiological or environmental signal into electrical signals. Common applications include health monitoring, rehabilitation, multimedia, and surveillance. In this research we demonstrate fabrication of piezoresistive sensors on textile fabrics through application of a screen-printed conductive nanocomposite layer of plasticized poly(vinyl chloride) (PVC), and carbon nanofiber (CNF). In order to understand the behavior of conductive plastisol, morphological, mechanical and electrical properties of composite films were investigated for different molecular weights of PVC. Homogeneous filler dispersion and good filler/polymer interphase were observed without any dominant filler orientation. Mechanical and electrical properties were found to be affected by CNF, plasticizer content and matrix molecular weight. CNFs were found to provide substantial bridging in the matrix and enhance strength. These nanostructured composite sensors were found to be sensitive under different levels of strain which can be monitored by change in electrical resistance. Finally, we demonstrate the fabrication of piezoresistive sensors on textile fabrics through application of a screen-printed conductive nanocomposite layer of conductive plastisol. Conductive plastisol was found to show good adhesion to fabric with homogeneous CNF distribution. As in composite films, samples were found to show negative piezoresistance at different levels of strain. Strain level and filler concentration were found to affect the piezoresistive behavior and sensitivity of the printed sensors.

  1. Chloride Channelopathies of ClC-2

    Science.gov (United States)

    Bi, Miao Miao; Hong, Sen; Zhou, Hong Yan; Wang, Hong Wei; Wang, Li Na; Zheng, Ya Juan

    2014-01-01

    Chloride channels (ClCs) have gained worldwide interest because of their molecular diversity, widespread distribution in mammalian tissues and organs, and their link to various human diseases. Nine different ClCs have been molecularly identified and functionally characterized in mammals. ClC-2 is one of nine mammalian members of the ClC family. It possesses unique biophysical characteristics, pharmacological properties, and molecular features that distinguish it from other ClC family members. ClC-2 has wide organ/tissue distribution and is ubiquitously expressed. Published studies consistently point to a high degree of conservation of ClC-2 function and regulation across various species from nematodes to humans over vast evolutionary time spans. ClC-2 has been intensively and extensively studied over the past two decades, leading to the accumulation of a plethora of information to advance our understanding of its pathophysiological functions; however, many controversies still exist. It is necessary to analyze the research findings, and integrate different views to have a better understanding of ClC-2. This review focuses on ClC-2 only, providing an analytical overview of the available literature. Nearly every aspect of ClC-2 is discussed in the review: molecular features, biophysical characteristics, pharmacological properties, cellular function, regulation of expression and function, and channelopathies. PMID:24378849

  2. Chloride Channelopathies of ClC-2

    Directory of Open Access Journals (Sweden)

    Miao Miao Bi

    2013-12-01

    Full Text Available Chloride channels (ClCs have gained worldwide interest because of their molecular diversity, widespread distribution in mammalian tissues and organs, and their link to various human diseases. Nine different ClCs have been molecularly identified and functionally characterized in mammals. ClC-2 is one of nine mammalian members of the ClC family. It possesses unique biophysical characteristics, pharmacological properties, and molecular features that distinguish it from other ClC family members. ClC-2 has wide organ/tissue distribution and is ubiquitously expressed. Published studies consistently point to a high degree of conservation of ClC-2 function and regulation across various species from nematodes to humans over vast evolutionary time spans. ClC-2 has been intensively and extensively studied over the past two decades, leading to the accumulation of a plethora of information to advance our understanding of its pathophysiological functions; however, many controversies still exist. It is necessary to analyze the research findings, and integrate different views to have a better understanding of ClC-2. This review focuses on ClC-2 only, providing an analytical overview of the available literature. Nearly every aspect of ClC-2 is discussed in the review: molecular features, biophysical characteristics, pharmacological properties, cellular function, regulation of expression and function, and channelopathies.

  3. The Youngest Globular Clusters

    CERN Document Server

    Beck, Sara

    2014-01-01

    It is likely that all stars are born in clusters, but most clusters are not bound and disperse. None of the many protoclusters in our Galaxy are likely to develop into long-lived bound clusters. The Super Star Clusters (SSCs) seen in starburst galaxies are more massive and compact and have better chances of survival. The birth and early development of SSCs takes place deep in molecular clouds, and during this crucial stage the embedded clusters are invisible to optical or UV observations but are studied via the radio-infared supernebulae (RISN) they excite. We review observations of embedded clusters and identify RISN within 10 Mpc whose exciting clusters have a million solar masses or more in volumes of a few cubic parsecs and which are likely to not only survive as bound clusters, but to evolve into objects as massive and compact as Galactic globulars. These clusters are distinguished by very high star formation efficiency eta, at least a factor of 10 higher than the few percent seen in the Galaxy, probably...

  4. Star Clusters within FIRE

    Science.gov (United States)

    Perez, Adrianna; Moreno, Jorge; Naiman, Jill; Ramirez-Ruiz, Enrico; Hopkins, Philip F.

    2017-01-01

    In this work, we analyze the environments surrounding star clusters of simulated merging galaxies. Our framework employs Feedback In Realistic Environments (FIRE) model (Hopkins et al., 2014). The FIRE project is a high resolution cosmological simulation that resolves star forming regions and incorporates stellar feedback in a physically realistic way. The project focuses on analyzing the properties of the star clusters formed in merging galaxies. The locations of these star clusters are identified with astrodendro.py, a publicly available dendrogram algorithm. Once star cluster properties are extracted, they will be used to create a sub-grid (smaller than the resolution scale of FIRE) of gas confinement in these clusters. Then, we can examine how the star clusters interact with these available gas reservoirs (either by accreting this mass or blowing it out via feedback), which will determine many properties of the cluster (star formation history, compact object accretion, etc). These simulations will further our understanding of star formation within stellar clusters during galaxy evolution. In the future, we aim to enhance sub-grid prescriptions for feedback specific to processes within star clusters; such as, interaction with stellar winds and gas accretion onto black holes and neutron stars.

  5. Galaxy Clusters with Chandra

    CERN Document Server

    Forman, W; Markevitch, M L; Vikhlinin, A A; Churazov, E

    2002-01-01

    We discuss Chandra results related to 1) cluster mergers and cold fronts and 2) interactions between relativistic plasma and hot cluster atmospheres. We describe the properties of cold fronts using NGC1404 in the Fornax cluster and A3667 as examples. We discuss multiple surface brightness discontinuities in the cooling flow cluster ZW3146. We review the supersonic merger underway in CL0657. Finally, we summarize the interaction between plasma bubbles produced by AGN and hot gas using M87 and NGC507 as examples.

  6. 15th Cluster workshop

    CERN Document Server

    Laakso, Harri; Escoubet, C. Philippe; The Cluster Active Archive : Studying the Earth’s Space Plasma Environment

    2010-01-01

    Since the year 2000 the ESA Cluster mission has been investigating the small-scale structures and processes of the Earth's plasma environment, such as those involved in the interaction between the solar wind and the magnetospheric plasma, in global magnetotail dynamics, in cross-tail currents, and in the formation and dynamics of the neutral line and of plasmoids. This book contains presentations made at the 15th Cluster workshop held in March 2008. It also presents several articles about the Cluster Active Archive and its datasets, a few overview papers on the Cluster mission, and articles reporting on scientific findings on the solar wind, the magnetosheath, the magnetopause and the magnetotail.

  7. Foliar application of calcium chloride and borax influences plant growth, yield, and quality of tomato (Lycopersicon esculentum Mill.) fruit

    OpenAIRE

    RAB, Abdur; Haq, Ihsan-ul

    2012-01-01

    The influence of CaCl2 and borax on growth, yield, and quality of tomato was investigated during the years 2009 and 2010. The experiment was laid out with a randomized complete block design. Calcium chloride (0.3% and 0.6%) and borax (0.2% and 0.4%) solutions were applied as foliar sprays either alone or in combination and data were recorded for plant height, branches per plant, flowers per cluster, fruits per plant, yield, fruit weight, fruit firmness, and total soluble solid content of the ...

  8. Statistical properties of convex clustering

    OpenAIRE

    Tan, Kean Ming; Witten, Daniela

    2015-01-01

    In this manuscript, we study the statistical properties of convex clustering. We establish that convex clustering is closely related to single linkage hierarchical clustering and $k$-means clustering. In addition, we derive the range of the tuning parameter for convex clustering that yields a non-trivial solution. We also provide an unbiased estimator of the degrees of freedom, and provide a finite sample bound for the prediction error for convex clustering. We compare convex clustering to so...

  9. Document Clustering Based on Semi-Supervised Term Clustering

    Directory of Open Access Journals (Sweden)

    Hamid Mahmoodi

    2012-05-01

    Full Text Available The study is conducted to propose a multi-step feature (term selection process and in semi-supervised fashion, provide initial centers for term clusters. Then utilize the fuzzy c-means (FCM clustering algorithm for clustering terms. Finally assign each of documents to closest associated term clusters. While most text clustering algorithms directly use documents for clustering, we propose to first group the terms using FCM algorithm and then cluster documents based on terms clusters. We evaluate effectiveness of our technique on several standard text collections and compare our results with the some classical text clustering algorithms.

  10. Determination of Key Flavor Components in Methylene Chloride Extracts from Processed Grapefruit Juice.

    Science.gov (United States)

    Jella; Rouseff; Goodner; Widmer

    1998-01-19

    The relative correlation of 52 aroma and 5 taste components in commercial not-from-concentrate grapefruit juices with flavor panel preference was determined. Methylene chloride extracts of juice were analyzed using GC/MS with a DB-5 column. Nonvolatiles determined included limonin and naringin by HPLC, degrees Brix, total acids, and degrees Brix/acid ratio. Juice samples were classified into low, medium, or high categories, based on average taste panel preference scores (nine-point hedonic scale). Principal component analysis demonstrated that highest quality juices were tightly clustered. Discriminant analysis indicated that 82% of the samples could be identified in the correct preference category using only myrcene, beta-caryophyllene, linalool, nootkatone, and degrees Brix. Nootkatone alone was not strongly associated with preference scores. The most preferred juices were strongly associated with low myrcene, low linalool, and intermediate levels of beta-caryophyllene.

  11. Active primary lithium thionyl chloride battery for artillery applications

    Science.gov (United States)

    Baldwin, Arlen R.; Delnick, Frank M.; Miller, David L.

    1990-03-01

    Sandia National Laboratories and Eagle Picher Industries have successfully developed an Active Lithium Thionyl Chloride (ALTC) power battery for unique artillery applications. Details of the design and the results of safety and performance will be presented.

  12. SUBSTITUTION OF CADMIUM CYANIDE ELECTROPLATING WITH ZINC CHLORIDE ELECTROPLATING

    Science.gov (United States)

    The study evaluated the zinc chloride electroplating process as a substitute for cadmium cyanide electroplating in the manufacture of industrial connectors and fittings at Aeroquip Corporation. The process substitution eliminates certain wastes, specifically cadmium and cyanide, ...

  13. Chloride ingress profiles measured by electron probe micro analysis

    DEFF Research Database (Denmark)

    Jensen, Ole mejlhede; Coats, Alison M.; Glasser, Fred P.

    1996-01-01

    Traditional techniques for measuring chloride ingress profiles do not apply well to high performance cement paste systems; the geometric resolution of the traditional measuring techniques is too low. In this paper measurements by Electron Probe Micro Analysis (EPMA) are presented. EPMA is demonst......Traditional techniques for measuring chloride ingress profiles do not apply well to high performance cement paste systems; the geometric resolution of the traditional measuring techniques is too low. In this paper measurements by Electron Probe Micro Analysis (EPMA) are presented. EPMA...... is demonstated to determine chloride ingress in cement paste on a micrometer scale. Potential chloride ingress routes such as cracks or the paste-aggregate interface may also be characterized by EPMA. Copyright (C) 1996 Elsevier Science Ltd...

  14. Prediction of chloride ingress and binding in cement paste

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Nielsen, Erik Pram; Herforth, Duncan

    2007-01-01

    This paper summarizes recent work on an analytical model for predicting the ingress rate of chlorides in cement-based materials. An integral part of this is a thermodynamic model for predicting the phase equilibria in hydrated Portland cement. The model’s ability to predict chloride binding...... in Portland cement pastes at any content of chloride, alkalis, sulfates and carbonate was verified experimentally and found to be equally valid when applied to other data in the literature. The thermodynamic model for predicting the phase equilibria in hydrated Portland cement was introduced into an existing...... Finite Difference Model for the ingress of chlorides into concrete which takes into account its multi-component nature. The “composite theory” was then used to predict the diffusivity of each ion based on the phase assemblage present in the hydrated Portland cement paste. Agreement was found between...

  15. Analysis of chloride diffusivity in concrete containing red mud

    Directory of Open Access Journals (Sweden)

    D.V. Ribeiro

    Full Text Available Red mud is a solid waste produced in the alumina production process and, due to its high pH, is classified as hazardous. Its incorporation in concrete mixtures, acting as filler due to the particles fineness, might be an interesting reuse alternative. The focus of this paper is to study the chloride diffusivity of concrete mixtures containing red-mud. The concentration of chlorides was monitored by measuring the conductivity of the anolyte, which was distilled water initially. In addition, the estimation of the chloride ions diffusion coefficients in steady and non-steady conditions, Ds and Dns, was obtained from the ''time-lag'' and ''equivalent time'' between diffusion and migration experiments. Due to superfine particle-size distribution and the "filler" effect, the red mud addition seems to assure lower chloride diffusivity.

  16. Effect of cadmium chloride on hepatic lipid peroxidation in mice

    DEFF Research Database (Denmark)

    Andersen, H R; Andersen, O

    1988-01-01

    Intraperitoneal administration of cadmium chloride to 8-12 weeks old CBA-mice enhanced hepatic lipid peroxidation. A positive correlation between cadmium chloride dose and level of peroxidation was observed in both male and female mice. A sex-related difference in mortality was not observed...... but at a dose of 25 mumol CdCl2/kg the level of hepatic lipid peroxidation was higher in male mice than in female mice. The hepatic lipid peroxidation was not increased above the control level in 3 weeks old mice, while 6 weeks old mice responded with increased peroxidation as did 8-12 weeks old mice....... The mortality after an acute toxic dose of cadmium chloride was the same in the three age groups. Pretreatment of mice with several low intraperitoneal doses of cadmium chloride alleviated cadmium induced mortality and lipid peroxidation. The results demonstrate both age dependency and a protective effect...

  17. 1300-nm gain obtained with dysprosium-doped chloride crystals

    Energy Technology Data Exchange (ETDEWEB)

    Page, R.H.; Schaffers, K.I.; Beach, R.J.; Payne, S.A.; Krupke, W.F.

    1996-03-01

    Dy{sup 3+} - doped chloride crystals have high 1300-nm emission quantum yields. Pump - probe experiments on La Cl{sub 3}:Dy{sup 3+} demonstrate optical gain consistent with predictions based on spectroscopic cross sections and lifetimes.

  18. Probabilistic evaluation of initiation time of chloride-induced corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Val, Dimitri V. [Department of Structural Engineering and Construction Management, Faculty of Civil and Environmental Engineering, Technion, Israel Institute of Technology, Haifa 32000 (Israel)], E-mail: val@tx.technion.ac.il; Trapper, Pavel A. [Department of Structural Engineering and Construction Management, Faculty of Civil and Environmental Engineering, Technion, Israel Institute of Technology, Haifa 32000 (Israel)

    2008-03-15

    The paper presents a model for chloride ingress into concrete. The model accounts for two mechanisms which control the chloride ingress-diffusion and convection. Using one-dimensional (1-D) formulation of the model, the influence of chloride binding and ambient humidity on chloride ingress into concrete has been investigated. Based on results of this investigation parameters for probabilistic analysis have been selected. Probabilistic evaluation of the time to corrosion initiation has then been carried out for a reinforced concrete (RC) wall (1-D problem) and a RC column (2-D problem) in a marine environment. Results of the analysis show that for the same thickness of the concrete cover the probability of corrosion initiation in the corner reinforcing bars of the RC column is much higher than in reinforcing bars in the middle part of the RC wall. The results demonstrate the importance of 2-D modelling for correct prediction of corrosion initiation in such RC elements as columns and beams.

  19. Methyltrioctylammonium chloride catalysed sonochemical synthesis of acridine diones

    Indian Academy of Sciences (India)

    Bhupinder Kaur; Harish Kumar

    2013-09-01

    The greener, clean and efficient protocol for the synthesis of acridine diones derivatives has been achieved by reacting aromatic aldehyde, dimedone and amines using methyltrioctylammonium chloride (Aliquate 336) as a catalyst under ultrasonic irradiations.

  20. Chloride supporting electrolytes for all-vanadium redox flow batteries.

    Science.gov (United States)

    Kim, Soowhan; Vijayakumar, M; Wang, Wei; Zhang, Jianlu; Chen, Baowei; Nie, Zimin; Chen, Feng; Hu, Jianzhi; Li, Liyu; Yang, Zhenguo

    2011-10-28

    This paper examines vanadium chloride solutions as electrolytes for an all-vanadium redox flow battery. The chloride solutions were capable of dissolving more than 2.3 M vanadium at varied valence states and remained stable at 0-50 °C. The improved stability appeared due to the formation of a vanadium dinuclear [V(2)O(3)·4H(2)O](4+) or a dinuclear-chloro complex [V(2)O(3)Cl·3H(2)O](3+) in the solutions over a wide temperature range. The all-vanadium redox flow batteries with the chloride electrolytes demonstrated excellent reversibility and fairly high efficiencies. Only negligible, if any, gas evolution was observed. The improved energy capacity and good performance, along with the ease in heat management, would lead to substantial reduction in capital cost and life-cycle cost, making the vanadium chloride redox flow battery a promising candidate for stationary applications.

  1. Homocoupling of Aryl Bromides Catalyzed by Nickel Chloride in Pyridine

    Institute of Scientific and Technical Information of China (English)

    TAO, Xiao-Chun; ZHOU, Wei; ZHANG, Yue-Ping; DAI, Chun-ya; SHEN, Dong; HUANG, Mei

    2006-01-01

    Pyridine was used as a solvent for homocoupling of aryl bromides catalyzed by nickel chloride/triarylphosphine in the presence of zinc and recycled easily. Triphenylphosphine was the best ligand for nickel in this coupling reaction.

  2. Facile Preparation of Chloride-Conducting Membranes: First Step towards a Room-Temperature Solid-State Chloride-Ion Battery.

    Science.gov (United States)

    Gschwind, Fabienne; Steinle, Dominik; Sandbeck, Daniel; Schmidt, Celine; von Hauff, Elizabeth

    2016-12-01

    Three types of chloride-conducting membranes based on polyvinyl chloride, commercial gelatin, and polyvinyldifluoride-hexafluoropolymer are introduced in this report. The polymers are mixed with chloride-containing salts, such as tetrabutylammonium chloride, and cast to form membranes. We studied the structural properties, thermal stability, and electrochemical response of the membranes to understand chloride migration and transport. Finally, the membranes are tested in a prototype solid-state chloride-ion battery setup. The feasibility of the membranes for their potential use in anion batteries is discussed.

  3. Synthesis and structural characterization of polyaniline/cobalt chloride composites

    Energy Technology Data Exchange (ETDEWEB)

    Asha, E-mail: arana5752@gmail.com [Department of Basic and Applied Sciences, Bhagat Phool Singh Mahilla Vishwavidyalaya, Khanpur Kalan, Sonipat-131305 (India); Goyal, Sneh Lata; Kishore, Nawal [Department of Applied Physics, Guru Jambheshwar University of Science and Technology, Hisar-125001 (India)

    2016-05-23

    Polyaniline (PANI) and PANI /cobalt chloride composites were synthesized by in situ chemical oxidative polymerization of aniline with CoCl{sub 2}.6H{sub 2}O using ammonium peroxidisulphate as an oxidant. These composites were characterized by X-ray diffraction (XRD) and Scanning electron microscopy (SEM). The XRD study reveals that both PANI and composites are amorphous. The XRD and SEM results confirm the presence of cobalt chloride in the composites.

  4. Aqueous Chloride Operations Overview: Plutonium and Americium Purification/Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, Kyle Shelton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kimball, David Bryan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Skidmore, Bradley Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-28

    These are a set of slides intended for an information session as part of recruiting activities at Brigham Young University. It gives an overview of aqueous chloride operations, specifically on plutonium and americium purification/recovery. This presentation details the steps taken perform these processes, from plutonium size reduction, dissolution, solvent extraction, oxalate precipitation, to calcination. For americium recovery, it details the CLEAR (chloride extraction and actinide recovery) Line, oxalate precipitation and calcination.

  5. cis-Dichloridobis(1,10-phenanthrolinechromium(III chloride

    Directory of Open Access Journals (Sweden)

    Xiaoli Gao

    2011-02-01

    Full Text Available In the title complex, [CrCl2(C12H8N22]Cl, the CrIII ion is situated on a twofold rotation axis and displays a slightly distorted octahedral CrCl2N4 coordination geometry. The Cr environment is composed of a cis arrangement of two 1,10-phenanthroline and two chloride ligands. The chloride counter-anion exhibits half-occupation and is equally disordered over two positions.

  6. KINETICS OF VINYL CHLORIDE (CO)POLYMERIZATION AT HIGH CONVERSION

    Institute of Scientific and Technical Information of China (English)

    Zu-ren Pan; Zhi-xue Weng; Zhi-ming Huang

    1999-01-01

    This paper provides a summarized review on the kinetics of vinyl chloride homopolymerization in the absence and presence of chain transfer agents, of VC/DAP(diallyl phthalate) copolymerization with chain extension and/or slightly crosslinking functions, and of vinylidene chloride/VC random copolymerization.Models of rate, degree of polymerization or molecular weight, copolymer composition, gel fraction and crosslinking density were proposed and interpreted mechanistically.

  7. Mechanism of chloride interaction with neurotransmitter:sodium symporters.

    Science.gov (United States)

    Zomot, Elia; Bendahan, Annie; Quick, Matthias; Zhao, Yongfang; Javitch, Jonathan A; Kanner, Baruch I

    2007-10-11

    Neurotransmitter:sodium symporters (NSS) have a critical role in regulating neurotransmission and are targets for psychostimulants, anti-depressants and other drugs. Whereas the non-homologous glutamate transporters mediate chloride conductance, in the eukaryotic NSS chloride is transported together with the neurotransmitter. In contrast, transport by the bacterial NSS family members LeuT, Tyt1 and TnaT is chloride independent. The crystal structure of LeuT reveals an occluded binding pocket containing leucine and two sodium ions, and is highly relevant for the neurotransmitter transporters. However, the precise role of chloride in neurotransmitter transport and the location of its binding site remain elusive. Here we show that introduction of a negatively charged amino acid at or near one of the two putative sodium-binding sites of the GABA (gamma-aminobutyric acid) transporter GAT-1 from rat brain (also called SLC6A1) renders both net flux and exchange of GABA largely chloride independent. In contrast to wild-type GAT-1, a marked stimulation of the rate of net flux, but not of exchange, was observed when the internal pH was lowered. Equivalent mutations introduced in the mouse GABA transporter GAT4 (SLC6A11) and the human dopamine transporter DAT (SLC6A3) also result in chloride-independent transport, whereas the reciprocal mutations in LeuT and Tyt1 render substrate binding and/or uptake by these bacterial NSS chloride dependent. Our data indicate that the negative charge, provided either by chloride or by the transporter itself, is required during binding and translocation of the neurotransmitter, probably to counterbalance the charge of the co-transported sodium ions.

  8. Hafnium extraction from acidic chloride solutions by Cyanex 923

    Energy Technology Data Exchange (ETDEWEB)

    El-Ammouri, E.; Distin, P.A. [McGill Univ., Montreal (Canada)

    1996-08-01

    Hafnium extraction from hydrochloric acid/lithium chloride solutions into Cyanex 923 in kerosene has been studied. Variables investigated were hydrochloric acid, total chloride and hafnium concentrations in the aqueous phase, and extractant/modifier (isodecanol) levels in the organic phase. Hafnium is considered to load as the tetrachloride complex forming a disolvate with Cyanex 923. Results are compared with equivalent data for zirconium extraction. 14 refs., 7 figs., 2 tabs.

  9. Durability Analysis of Subway Station in Chloride Environment

    OpenAIRE

    Yang LuFeng; Yu Bo; Hong Bin

    2013-01-01

    In this study, a finite element model for chloride ions transport in saturated concrete was proposed based on the Fick’s second law of diffusion. The governing partial differential equation was solved numerically in space as a boundary-value problem and in time as an initial-value problem by means of the finite element formulations. The maximum allowable value of chloride diffusion coefficient within different locations of subway station with service life of 100a was achieved and suggestions ...

  10. Recovering germanium from coal ash by chlorination with ammonium chloride

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new process of enriching germanium from coal ash was developed. The process involves in mixing the coal ash and ammonium chloride and then roasting the mixture to produce germanium chloride that is then absorbed by dilute hydrochloric acid and hydrolyzed to germanium oxide. The germanium recovery reached to 80.2% at the optimum condition: mass ratio of NH4Cl/coal ash is 0.15, roasting temperature 400℃ and roasting time 90 min.

  11. Synthesis and structural characterization of polyaniline/cobalt chloride composites

    Science.gov (United States)

    Asha, Goyal, Sneh Lata; Kishore, Nawal

    2016-05-01

    Polyaniline (PANI) and PANI /cobalt chloride composites were synthesized by in situ chemical oxidative polymerization of aniline with CoCl2.6H2O using ammonium peroxidisulphate as an oxidant. These composites were characterized by X-ray diffraction (XRD) and Scanning electron microscopy (SEM). The XRD study reveals that both PANI and composites are amorphous. The XRD and SEM results confirm the presence of cobalt chloride in the composites.

  12. Determination of chloride in geological samples by ion chromatography

    Science.gov (United States)

    Wilson, S.A.; Gent, C.A.

    1983-01-01

    Samples of silicate rocks are prepared by sodium carbonate fusion and then treated by ion chromatography. The method was tested for geological standards with chloride concentration between 0.003 and 3%. Observed chloride concentrations comparedd favorably with literature values. The relative standard deviation and detection limit for the method were 8% and 7 ppm, respectively. Up to 30 determination per 24-hour period were possible. ?? 1983.

  13. Chlorides behavior in raw fly ash washing experiments

    Energy Technology Data Exchange (ETDEWEB)

    Zhu Fenfen, E-mail: zhu@hse.gcoe.kyoto-u.ac.jp [Department of Urban and Environmental Engineering, Graduate School of Engineering, Katsura Campus, Kyoto University, Nishikyo-ku, Kyoto 615-8540 (Japan); Takaoka, Masaki; Oshita, Kazuyuki [Department of Urban and Environmental Engineering, Graduate School of Engineering, Katsura Campus, Kyoto University, Nishikyo-ku, Kyoto 615-8540 (Japan); Kitajima, Yoshinori; Inada, Yasuhiro [High Energy Accelerator Research Organization (KEK), Institute of Material Structure Science (IMSS), Oho 1-1, Tsukuba, Ibaraki 305-0801 (Japan); Morisawa, Shinsuke; Tsuno, Hiroshi [Department of Urban and Environmental Engineering, Graduate School of Engineering, Katsura Campus, Kyoto University, Nishikyo-ku, Kyoto 615-8540 (Japan)

    2010-06-15

    Chloride in fly ash from municipal solid waste incinerators (MSWIs) is one of the obstructive substances in recycling fly ash as building materials. As a result, we have to understand the behavior of chlorides in recycling process, such as washing. In this study, we used X-ray absorption near edge structure (XANES) and X-ray diffraction (XRD) to study the chloride behavior in washed residue of raw fly ash (RFA). We found that a combination of XRD and XANES, which is to use XRD to identify the situation of some compounds first and then process XANES data, was an effective way to explain the chlorides behavior in washing process. Approximately 15% of the chlorine in RFA was in the form of NaCl, 10% was in the form of KCl, 51% was CaCl{sub 2}, and the remainder was in the form of Friedel's salt. In washing experiments not only the mole percentage but also the amount of soluble chlorides including NaCl, KCl and CaCl{sub 2} decreases quickly with the increase of liquid to solid (L/S) ratio or washing frequency. However, those of insoluble chlorides decrease slower. Moreover, Friedel's salt and its related compound (11CaO.7Al{sub 2}O{sub 3}.CaCl{sub 2}) were reliable standards for the insoluble chlorides in RFA, which are strongly related to CaCl{sub 2}. Washing of RFA promoted the release of insoluble chlorides, most of which were in the form of CaCl{sub 2}.

  14. Cost-Effective Clustering

    CERN Document Server

    Gottlieb, S

    2001-01-01

    Small Beowulf clusters can effectively serve as personal or group supercomputers. In such an environment, a cluster can be optimally designed for a specific problem (or a small set of codes). We discuss how theoretical analysis of the code and benchmarking on similar hardware lead to optimal systems.

  15. [Cluster headache differential diagnosis].

    Science.gov (United States)

    Guégan-Massardier, Evelyne; Laubier, Cécile

    2015-11-01

    Cluster headache is characterized by disabling stereotyped headache. Early diagnosis allows appropriate treatment, unfortunately diagnostic errors are frequent. The main differential diagnoses are other primary or essential headaches. Migraine, more frequent and whose diagnosis is carried by excess, trigeminal neuralgia or other trigemino-autonomic cephalgia. Vascular or tumoral underlying condition can mimic cluster headache, neck and brain imaging is recommended, ideally MRI.

  16. Coma cluster of galaxies

    Science.gov (United States)

    1999-01-01

    Atlas Image mosaic, covering 34' x 34' on the sky, of the Coma cluster, aka Abell 1656. This is a particularly rich cluster of individual galaxies (over 1000 members), most prominently the two giant ellipticals, NGC 4874 (right) and NGC 4889 (left). The remaining members are mostly smaller ellipticals, but spiral galaxies are also evident in the 2MASS image. The cluster is seen toward the constellation Coma Berenices, but is actually at a distance of about 100 Mpc (330 million light years, or a redshift of 0.023) from us. At this distance, the cluster is in what is known as the 'Hubble flow,' or the overall expansion of the Universe. As such, astronomers can measure the Hubble Constant, or the universal expansion rate, based on the distance to this cluster. Large, rich clusters, such as Coma, allow astronomers to measure the 'missing mass,' i.e., the matter in the cluster that we cannot see, since it gravitationally influences the motions of the member galaxies within the cluster. The near-infrared maps the overall luminous mass content of the member galaxies, since the light at these wavelengths is dominated by the more numerous older stellar populations. Galaxies, as seen by 2MASS, look fairly smooth and homogeneous, as can be seen from the Hubble 'tuning fork' diagram of near-infrared galaxy morphology. Image mosaic by S. Van Dyk (IPAC).

  17. Mixed-Initiative Clustering

    Science.gov (United States)

    Huang, Yifen

    2010-01-01

    Mixed-initiative clustering is a task where a user and a machine work collaboratively to analyze a large set of documents. We hypothesize that a user and a machine can both learn better clustering models through enriched communication and interactive learning from each other. The first contribution or this thesis is providing a framework of…

  18. Cluster Synchronization Algorithms

    NARCIS (Netherlands)

    Xia, Weiguo; Cao, Ming

    2010-01-01

    This paper presents two approaches to achieving cluster synchronization in dynamical multi-agent systems. In contrast to the widely studied synchronization behavior, where all the coupled agents converge to the same value asymptotically, in the cluster synchronization problem studied in this paper,

  19. Neurostimulation in cluster headache

    DEFF Research Database (Denmark)

    Pedersen, Jeppe L; Barloese, Mads; Jensen, Rigmor H

    2013-01-01

    PURPOSE OF REVIEW: Neurostimulation has emerged as a viable treatment for intractable chronic cluster headache. Several therapeutic strategies are being investigated including stimulation of the hypothalamus, occipital nerves and sphenopalatine ganglion. The aim of this review is to provide...... effective strategy must be preferred as first-line therapy for intractable chronic cluster headache....

  20. Securing personal network clusters

    NARCIS (Netherlands)

    Jehangir, Assed; Heemstra de Groot, Sonia M.

    2007-01-01

    A Personal Network is a self-organizing, secure and private network of a user’s devices notwithstanding their geographic location. It aims to utilize pervasive computing to provide users with new and improved services. In this paper we propose a model for securing Personal Network clusters. Clusters

  1. Clustering Text Data Streams

    Institute of Scientific and Technical Information of China (English)

    Yu-Bao Liu; Jia-Rong Cai; Jian Yin; Ada Wai-Chee Fu

    2008-01-01

    Clustering text data streams is an important issue in data mining community and has a number of applications such as news group filtering, text crawling, document organization and topic detection and tracing etc. However, most methods are similarity-based approaches and only use the TF*IDF scheme to represent the semantics of text data and often lead to poor clustering quality. Recently, researchers argue that semantic smoothing model is more efficient than the existing TF.IDF scheme for improving text clustering quality. However, the existing semantic smoothing model is not suitable for dynamic text data context. In this paper, we extend the semantic smoothing model into text data streams context firstly. Based on the extended model, we then present two online clustering algorithms OCTS and OCTSM for the clustering of massive text data streams. In both algorithms, we also present a new cluster statistics structure named cluster profile which can capture the semantics of text data streams dynamically and at the same time speed up the clustering process. Some efficient implementations for our algorithms are also given. Finally, we present a series of experimental results illustrating the effectiveness of our technique.

  2. Relevant Subspace Clustering

    DEFF Research Database (Denmark)

    Müller, Emmanuel; Assent, Ira; Günnemann, Stephan;

    2009-01-01

    Subspace clustering aims at detecting clusters in any subspace projection of a high dimensional space. As the number of possible subspace projections is exponential in the number of dimensions, the result is often tremendously large. Recent approaches fail to reduce results to relevant subspace c...

  3. Structural transitions in clusters

    Science.gov (United States)

    Ghazali, A.; Lévy, J.-C. S.

    1997-02-01

    Monatomic clusters are studied by Monte Carlo relaxation using generalized Lennard-Jones potentials. A transition from an icosahedral symmetry to a crystalline symmetry with stacking faults is always observed. Bcc-based soft atom clusters are found to have a lower energy than the corresponding hcp and fcc ones below the melting point.

  4. Chloride ion transport performance in slag mortar under fatigue loading

    Institute of Scientific and Technical Information of China (English)

    WANG CaiHui; SUN Wei; JIANG JinYang; HAN JianDe; YE BangTu

    2012-01-01

    The transport performance of chloride ion in slag cement mortar was investigated experimentally.In the self-designed experiment,fatigue loading was coupled simultaneously with ion transportation process,the diffusion law of chloride ion was obtained by titration and the AE (acoustic emission) technique was employed to detect the real-time damage distribution in the mortar specimen.The results for fatigue stress levels of 0.3,0.4 and 0.5 and slag contents of 0,10%,30% and 50% showed that fatigue loading accelerated the diffusion of chloride ion in mortar and the acceleration effect increased with the increase in stress levels.Slag addition was found to improve anti-chloride ion erosion performance effectively with the best substitution level at 30%,because the inhibition effect of slag on chloride ion diffusion diminished when the slag content exceeded 30%.The comparative experiments indicated that dynamic load has a significant effect on the transport performance of chloride ion in slag cement mortar.

  5. Removal of chloride from electric arc furnace dust.

    Science.gov (United States)

    Chen, Wei-Sheng; Shen, Yun-Hwei; Tsai, Min-Shing; Chang, Fang-Chih

    2011-06-15

    Electric arc furnace (EAF) dust with high chloride content increases the threat of dioxin emissions and the high chloride content reduces the value of recycled zinc oxide produced by EAF dust recycling plants. This study conducts a number of laboratory experiments to determine the technical feasibility of a new dechlorination method. These methods consist of a series of roasting processes and water washing processes. In the roasting process, EAF dust was heated in a tube furnace to evaluate the parameters of atmospheric conditions, roasting temperature, and roasting time. Results indicate that sulfation roasting is more efficient in reducing chloride content than other roasting processes. The water washing process can totally remove water-soluble chloride at a solid to liquid ratio of 1:10. However, the remaining water-insoluble substance is difficult to dechlorinate. For example, lead chloride forms a hydroxyl-halide (PbOHCl) and lead chloride carbonate (Pb(2)CO(3)Cl(2)) agglutinative matrix that is hard to wash away.

  6. Intrinsic Resistance of Burkholderia cepacia Complex to Benzalkonium Chloride.

    Science.gov (United States)

    Ahn, Youngbeom; Kim, Jeong Myeong; Kweon, Ohgew; Kim, Seong-Jae; Jones, Richard C; Woodling, Kellie; Gamboa da Costa, Gonçalo; LiPuma, John J; Hussong, David; Marasa, Bernard S; Cerniglia, Carl E

    2016-11-22

    Pharmaceutical products that are contaminated with Burkholderia cepacia complex (BCC) bacteria may pose serious consequences to vulnerable patients. Benzyldimethylalkylammonium chloride (BZK) cationic surfactants are extensively used in medical applications and have been implicated in the coselection of antimicrobial resistance. The ability of BCC to degrade BZK, tetradecyldimethylbenzylammonium chloride (C14BDMA-Cl), dodecyldimethylbenzylammonium chloride (C12BDMA-Cl), decyldimethylbenzylammonium chloride (C10BDMA-Cl), hexyldimethylbenzylammonium chloride, and benzyltrimethylammonium chloride was determined by incubation in 1/10-diluted tryptic soy broth (TSB) to determine if BCC bacteria have the ability to survive and inactivate these disinfectants. With BZK, C14BDMA-Cl, and C12BDMA-Cl, inhibition of the growth of 20 BCC strains was observed in disinfectant solutions that ranged from 64 to 256 µg/ml. The efflux pump inhibitor carbonyl cyanide m-chlorophenylhydrazone increased the sensitivity of bacteria to 64 µg/ml BZK. The 20 BCC strains grew well in 1/10-diluted TSB medium with BZK, C12BDMA-Cl, and C10BDMA-Cl; they absorbed and degraded the compounds in 7 days. Formation of benzyldimethylamine and benzylmethylamine as the initial metabolites suggested that the cleavage of the C alkyl-N bond occurred as the first step of BZK degradation by BCC bacteria. Proteomic data confirmed the observed efflux activity and metabolic inactivation via biodegradation in terms of BZK resistance of BCC bacteria, which suggests that the two main resistance mechanisms are intrinsic and widespread.

  7. Extractive process for preparing high purity magnesium chloride hexahydrate

    Directory of Open Access Journals (Sweden)

    Fezei Radouanne

    2012-01-01

    Full Text Available This paper refers a method for the preparation of magnesium chloride hexahydrate (bischofite from Sebkha el Melah of Zarzis Tunisian natural brine. It is a five-stage process essentially based on crystallization by isothermal evaporation and chemical precipitation. The two first steps were dedicated to the crystallization of sodium chloride and potassiummagnesium double salts, respectively. Then, the resulting liquor was desulfated using calcium chloride solution. After that another isothermal evaporation stage was implemented in order to eliminate potassium ions in the form of carnallite, KCl.MgCl2.6H2O. At the end of this step, the recovered solution primarily composed of magnesium and chloride ions was treated by dioxan in order to precipitate magnesium chloride as MgCl2.6H2O.C4H8O2. This compound dried at constant temperature of 100°C gave good quality magnesium chloride hexahydrate. Besides this salt, the various by-products obtained from the different treatment stages are also useful.

  8. Corneal Neurotoxicity Due to Topical Benzalkonium Chloride

    Science.gov (United States)

    Sarkar, Joy; Chaudhary, Shweta; Namavari, Abed; Ozturk, Okan; Chang, Jin-Hong; Yco, Lisette; Sonawane, Snehal; Khanolkar, Vishakha; Hallak, Joelle; Jain, Sandeep

    2012-01-01

    Purpose. The aim of this study was to determine and characterize the effect of topical application of benzalkonium chloride (BAK) on corneal nerves in vivo and in vitro. Methods. Thy1-YFP+ neurofluorescent mouse eyes were treated topically with vehicle or BAK (0.01% or 0.1%). Wide-field stereofluorescence microscopy was performed to sequentially image the treated corneas in vivo every week for 4 weeks, and changes in stromal nerve fiber density (NFD) and aqueous tear production were determined. Whole-mount immunofluorescence staining of corneas was performed with antibodies to axonopathy marker SMI-32. Western immunoblot analyses were performed on trigeminal ganglion and corneal lysates to determine abundance of proteins associated with neurotoxicity and regeneration. Compartmental culture of trigeminal ganglion neurons was performed in Campenot devices to determine whether BAK affects neurite outgrowth. Results. BAK-treated corneas exhibited significantly reduced NFD and aqueous tear production, and increased inflammatory cell infiltration and fluorescein staining at 1 week (P < 0.05). These changes were most significant after 0.1% BAK treatment. The extent of inflammatory cell infiltration in the cornea showed a significant negative correlation with NFD. Sequential in vivo imaging of corneas showed two forms of BAK-induced neurotoxicity: reversible neurotoxicity characterized by axonopathy and recovery, and irreversible neurotoxicity characterized by nerve degeneration and regeneration. Increased abundance of beta III tubulin in corneal lysates confirmed regeneration. A dose-related significant reduction in neurites occurred after BAK addition to compartmental cultures of dissociated trigeminal ganglion cells. Although both BAK doses (0.0001% and 0.001%) reduced nerve fiber length, the reduction was significantly more with the higher dose (P < 0.001). Conclusion. Topical application of BAK to the eye causes corneal neurotoxicity, inflammation, and reduced aqueous

  9. Aspergilli Response to Benzalkonium Chloride and Novel-Synthesized Fullerenol/Benzalkonium Chloride Nanocomposite.

    Science.gov (United States)

    Unković, Nikola; Ljaljević Grbić, Milica; Stupar, Miloš; Vukojević, Jelena; Janković, Vesna; Jović, Danica; Djordjević, Aleksandar

    2015-01-01

    A comprehensive comparative analysis of antifungal potential of benzalkonium chloride and newly synthesized fullerenol/benzalkonium chloride nanocomposite was conducted to assess the possible impact of carbon-based nanocarrier on antimicrobial properties of the commonly used biocide. Physical characterization of synthesized nanocomposite showed zeta potential of +37.4 mV and inhomogeneous particles size distribution, with nanocomposite particles' dimensions within 30-143 nm and maximum number of particles at 44 nm. The effect of pure and fullerenol nanocarrier-bound biocide was evaluated in eight Aspergillus species. In mycelial growth assay, nanocomposite was more potent, as fungicidal effect of 1.04/0.6 μg mL(-1) was obtained in all but one of the isolates (A. niger), while proportional concentration of pure biocide (0.6 μg mL(-1)) completely inhibited mycelial growth of only three Aspergillus species. However, conidia appear to be less susceptible to nanocomposite treatment, as lower fungistatic (MIC) and fungicidal (MFC) concentrations were obtained with biocide alone (MIC in range from 0.03 to 0.15 μg mL(-1) and MFC from 0.075 to 0.45 μg mL(-1)). To a different degree, both substances stimulated aflatoxin B1 production and inhibited ochratoxin A synthesis. Very low mycelium biomass yield, in range from 1.0 to 3.0 mg dry weight, was documented in both biocide and nanocomposite enriched medium.

  10. Behavior and products of mechano-chemical dechlorination of polyvinyl chloride and poly (vinylidene chloride)

    Energy Technology Data Exchange (ETDEWEB)

    Xiao Xiao [College of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China); Changsha Research Institute of Mining and Metallurgy, Changsha 410012 (China); Zeng Zigao [Changsha Research Institute of Mining and Metallurgy, Changsha 410012 (China); Xiao Songwen [Changsha Research Institute of Mining and Metallurgy, Changsha 410012 (China)], E-mail: swinxiao@yahoo.com.cn

    2008-02-28

    The mechano-chemical (MC) dechlorination of polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC) was performed by mechanical milling PVC/PVDC powder with zinc powder in a planetary ball mill, and the products of dechlorination were characterized by Infrared spectra (IR), X-ray diffraction (XRD), Raman spectroscopy, gas chromatography-mass spectrometry (GC-MS), and {sup 13}C solid-state nuclear magnetic resonance (NMR). The experimental results show that PVC/PVDC can be easily dechlorinated by milling with zinc powder, and formed various kinds of inorganic and organic products. Inorganic compounds included Zn{sub 2}OCl{sub 2}.2H{sub 2}O, Zn{sub 5}(OH){sub 8}Cl{sub 2}.H{sub 2}O etc., and organic products involved diamond-like carbon, carbyne fragment, polyacetylene etc. Organic products formed following the paths of dechlorination, dehydrochlorination, crosslink, and oxidation. The mechano-chemical dechlorination process of PVC/PVDC may be an effective approach for carbyne synthesizing in the appropriate condition.

  11. Mathematical classification and clustering

    CERN Document Server

    Mirkin, Boris

    1996-01-01

    I am very happy to have this opportunity to present the work of Boris Mirkin, a distinguished Russian scholar in the areas of data analysis and decision making methodologies. The monograph is devoted entirely to clustering, a discipline dispersed through many theoretical and application areas, from mathematical statistics and combina­ torial optimization to biology, sociology and organizational structures. It compiles an immense amount of research done to date, including many original Russian de­ velopments never presented to the international community before (for instance, cluster-by-cluster versions of the K-Means method in Chapter 4 or uniform par­ titioning in Chapter 5). The author's approach, approximation clustering, allows him both to systematize a great part of the discipline and to develop many in­ novative methods in the framework of optimization problems. The optimization methods considered are proved to be meaningful in the contexts of data analysis and clustering. The material presented in ...

  12. Neutrosophic Hierarchical Clustering Algoritms

    Directory of Open Access Journals (Sweden)

    Rıdvan Şahin

    2014-03-01

    Full Text Available Interval neutrosophic set (INS is a generalization of interval valued intuitionistic fuzzy set (IVIFS, whose the membership and non-membership values of elements consist of fuzzy range, while single valued neutrosophic set (SVNS is regarded as extension of intuitionistic fuzzy set (IFS. In this paper, we extend the hierarchical clustering techniques proposed for IFSs and IVIFSs to SVNSs and INSs respectively. Based on the traditional hierarchical clustering procedure, the single valued neutrosophic aggregation operator, and the basic distance measures between SVNSs, we define a single valued neutrosophic hierarchical clustering algorithm for clustering SVNSs. Then we extend the algorithm to classify an interval neutrosophic data. Finally, we present some numerical examples in order to show the effectiveness and availability of the developed clustering algorithms.

  13. Cool Cluster Correctly Correlated

    Energy Technology Data Exchange (ETDEWEB)

    Varganov, Sergey Aleksandrovich [Iowa State Univ., Ames, IA (United States)

    2005-01-01

    Atomic clusters are unique objects, which occupy an intermediate position between atoms and condensed matter systems. For a long time it was thought that physical and chemical properties of atomic dusters monotonically change with increasing size of the cluster from a single atom to a condensed matter system. However, recently it has become clear that many properties of atomic clusters can change drastically with the size of the clusters. Because physical and chemical properties of clusters can be adjusted simply by changing the cluster's size, different applications of atomic clusters were proposed. One example is the catalytic activity of clusters of specific sizes in different chemical reactions. Another example is a potential application of atomic clusters in microelectronics, where their band gaps can be adjusted by simply changing cluster sizes. In recent years significant advances in experimental techniques allow one to synthesize and study atomic clusters of specified sizes. However, the interpretation of the results is often difficult. The theoretical methods are frequently used to help in interpretation of complex experimental data. Most of the theoretical approaches have been based on empirical or semiempirical methods. These methods allow one to study large and small dusters using the same approximations. However, since empirical and semiempirical methods rely on simple models with many parameters, it is often difficult to estimate the quantitative and even qualitative accuracy of the results. On the other hand, because of significant advances in quantum chemical methods and computer capabilities, it is now possible to do high quality ab-initio calculations not only on systems of few atoms but on clusters of practical interest as well. In addition to accurate results for specific clusters, such methods can be used for benchmarking of different empirical and semiempirical approaches. The atomic clusters studied in this work contain from a few atoms

  14. Job Oriented Monitoring Clusters

    Directory of Open Access Journals (Sweden)

    Vijayalaxmi Cigala,

    2011-03-01

    Full Text Available There has been a lot of development in the field of clusters and grids. Recently, the use of clusters has been on rise in every possible field. This paper proposes a system that monitors jobs onlarge computational clusters. Monitoring jobs is essential to understand how jobs are being executed. This helps us in understanding the complete life cycle of the jobs being executed on large clusters. Also, this paper describes how the information obtained by monitoring the jobs would help in increasing the overall throughput of clusters. Heuristics help in efficient job distribution among the computational nodes, thereby accomplishing fair job distribution policy. The proposed system would be capable of loadbalancing among the computational nodes, detecting failures, taking corrective actions after failure detection, job monitoring, system resource monitoring, etc.

  15. On TPC cluster reconstruction

    CERN Document Server

    Dydak, F; Nefedov, Y; Wotschack, J; Zhemchugov, A

    2004-01-01

    For a bias-free momentum measurement of TPC tracks, the correct determination of cluster positions is mandatory. We argue in particular that (i) the reconstruction of the entire longitudinal signal shape in view of longitudinal diffusion, electronic pulse shaping, and track inclination is important both for the polar angle reconstruction and for optimum r phi resolution; and that (ii) self-crosstalk of pad signals calls for special measures for the reconstruction of the z coordinate. The problem of 'shadow clusters' is resolved. Algorithms are presented for accepting clusters as 'good' clusters, and for the reconstruction of the r phi and z cluster coordinates, including provisions for 'bad' pads and pads next to sector boundaries, respectively.

  16. A Commodity Computing Cluster

    Science.gov (United States)

    Teuben, P. J.; Wolfire, M. G.; Pound, M. W.; Mundy, L. G.

    We have assembled a cluster of Intel-Pentium based PCs running Linux to compute a large set of Photodissociation Region (PDR) and Dust Continuum models. For various reasons the cluster is heterogeneous, currently ranging from a single Pentium-II 333 MHz to dual Pentium-III 450 MHz CPU machines. Although this will be sufficient for our ``embarrassingly parallelizable problem'' it may present some challenges for as yet unplanned future use. In addition the cluster was used to construct a MIRIAD benchmark, and compared to equivalent Ultra-Sparc based workstations. Currently the cluster consists of 8 machines, 14 CPUs, 50GB of disk-space, and a total peak speed of 5.83 GHz, or about 1.5 Gflops. The total cost of this cluster has been about $12,000, including all cabling, networking equipment, rack, and a CD-R backup system. The URL for this project is http://dustem.astro.umd.edu.

  17. Radiolytic formation of Ag clusters in aqueous polyvinyl alcohol solution and hydrogel matrix

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Manmohan [Radiation Chemistry and Chemical Dynamics Division, Bhabha Atomic Research Centre, Mumbai 400 085 (India)]. E-mail: manmoku@magnum.barc.ernet.in; Varshney, Lalit [Radiation Technology Development Section, Bhabha Atomic Research Centre, Mumbai 400 085 (India); Francis, Sanju [Radiation Technology Development Section, Bhabha Atomic Research Centre, Mumbai 400 085 (India)

    2005-05-01

    Ag{sup +} ions, in aqueous polyvinyl alcohol (PVA) solution and in PVA hydrogel matrix have been gamma radiolytically reduced to produce Ag clusters. UV-visible absorption spectral characteristics of Ag clusters obtained under different gamma dose, Ag{sup +} concentration, PVA concentration and crosslinking density of the gel used have been studied. The effect of Ag{sup +} ions on the radiation crosslinking of the PVA chains, have also been investigated by viscosity measurements. The radiation-induced Ag{sup +} ion reduction was followed by crosslinking of the PVA chains. PVA was found to be a very efficient stabilizer to prevent aggregation of Ag clusters. The clusters produced in the hydrogel matrix were expected to be smaller than the pore size ({approx}2-20 nm) of the gels used in the study. These Ag clusters were unable to reduce methyl viologen (MV{sup 2+}) chloride and were stable in air.

  18. Radiolytic formation of Ag clusters in aqueous polyvinyl alcohol solution and hydrogel matrix

    Science.gov (United States)

    Kumar, Manmohan; Varshney, Lalit; Francis, Sanju

    2005-05-01

    Ag+ ions, in aqueous polyvinyl alcohol (PVA) solution and in PVA hydrogel matrix have been gamma radiolytically reduced to produce Ag clusters. UV-visible absorption spectral characteristics of Ag clusters obtained under different gamma dose, Ag+ concentration, PVA concentration and crosslinking density of the gel used have been studied. The effect of Ag+ ions on the radiation crosslinking of the PVA chains, have also been investigated by viscosity measurements. The radiation-induced Ag+ ion reduction was followed by crosslinking of the PVA chains. PVA was found to be a very efficient stabilizer to prevent aggregation of Ag clusters. The clusters produced in the hydrogel matrix were expected to be smaller than the pore size (∼2-20 nm) of the gels used in the study. These Ag clusters were unable to reduce methyl viologen (MV2+) chloride and were stable in air.

  19. 40 CFR 61.63 - Emission standard for vinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Emission standard for vinyl chloride... for Vinyl Chloride § 61.63 Emission standard for vinyl chloride plants. An owner or operator of a vinyl chloride plant shall comply with the requirements of this section and § 61.65. (a) Vinyl...

  20. 21 CFR 172.330 - Calcium pantothenate, calcium chloride double salt.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Calcium pantothenate, calcium chloride double salt..., calcium chloride double salt. The food additive calcium chloride double salt of calcium pantothenate may... information required by the Act, the following: (1) The name of the additive “calcium chloride double salt of...

  1. DEVELOPMENTAL TOXICITY OF COPPER CHLORIDE, METHYLENE CHLORIDE,AND 6-AMINONICOTINAMIDE TO EMBRYOS OF THE GRASS SHRIMPPALAEMONETES PUGIO

    Science.gov (United States)

    Embryos of estuarine grass shrimp Palaemonetes pugio have demonstrated sensitivity to various solvents and petroleum products, indicating utility for evaluating estuarine contamination. Testing was performed to establish concentration-response curves for methylene chloride, cop...

  2. Nuclear Quadrupole Resonance Study of Potassium - - Chloride.

    Science.gov (United States)

    Ramia, Maximo Elias

    Fast Fourier transform nuclear quadrupole resonance (NQR) was used to study the cubic antifluorite crystal potassium hexacloro-osmate, K(,2)OsCl(,6). The study of the ('35)Cl and ('37)Cl resonances were performed on three samples of K(,2)OsCl(,6), a powder sample, a powder sample recrystallized from D(,2)O and a single crystal sample. The studies were carried out in the temperature range 300 to 6K. A detailed study of the ('35)Cl and ('37)Cl NQR lineshapes, in the temperature range 70 to 300K, showed that the lineshapes reflect the strain fields produced by lattice dislocations and point defects. The temperature evolution of these strain fields give rise to a satellite line which previously was attributed to H('+) ion impurities present in the samples. A comprehensive study of the temperature evolution of the NQR spectrum in the vicinity of the phase transition revealed a drop of line intensity and the progressive appearance of an extra broad resonance component. Both effects are associated with the existence of precursor dynamic clusters at temperatures higher than T(,C). Qualitatively similar but quantitatively different behaviour was observed in the powder and single crystal samples. Although the precursor clusters are an intrinsic property of the phrase transition, their detailed dynamics is sample independent. A NQR study of the tetragonal phase showed that at the lowest temperature the ratio of line intensities is 2:1. The phase shift effect previously observed in the tetragonal phase of K(,2)ReCl(,6) was also observed in K(,2)OsCl(,6). The effect has been explained as an experimental artifact introduced by the truncation of the FID due to the spectrometer dead time. Spin-lattice relaxation measurements in the cubic phase show two component relaxation in the vicinity of T(,C). The behaviour is quantitatively different in the powder and single crystal samples. The short relaxation time is associated with dynamic clusters. Spin-lattice relaxation time

  3. Computational Studies on the Anharmonic Dynamics of Molecular Clusters

    Science.gov (United States)

    Mancini, John S.

    Molecular nanoclusters present ideal systems to probe the physical forces and dynamics that drive the behavior of larger bulk systems. At the nanocluster limit the first instances of several phenomena can be observed including the breaking of hydrogen and molecular bonds. Advancements in experimental and theoretical techniques have made it possible to explore these phenomena in great detail. The most fruitful of these studies have involved the use of both experimental and theoretical techniques to leverage to strengths of the two approaches. This dissertation seeks to explore several important phenomena of molecular clusters using new and existing theoretical methodologies. Three specific systems are considered, hydrogen chloride clusters, mixed water and hydrogen chloride clusters and the first cluster where hydrogen chloride autoionization occurs. The focus of these studies remain as close as possible to experimentally observable phenomena with the intention of validating, simulating and expanding on experimental work. Specifically, the properties of interested are those related to the vibrational ground and excited state dynamics of these systems. Studies are performed using full and reduced dimensional potential energy surface alongside advanced quantum mechanical methods including diffusion Monte Carlo, vibrational configuration interaction theory and quasi-classical molecular dynamics. The insight gained from these studies are great and varied. A new on-they-fly ab initio method for studying molecular clusters is validated for (HCl)1--6. A landmark study of the dissociation energy and predissociation mechanism of (HCl)3 is reported. The ground states of mixed (HCl)n(H2O)m are found to be highly delocalized across multiple stationary point configurations. Furthermore, it is identified that the consideration of this delocalization is required in vibrational excited state calculations to achieve agreement with experimental measurements. Finally, the theoretical

  4. Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture

    Science.gov (United States)

    Sanfilippo, Antonio [Richland, WA; Calapristi, Augustin J [West Richland, WA; Crow, Vernon L [Richland, WA; Hetzler, Elizabeth G [Kennewick, WA; Turner, Alan E [Kennewick, WA

    2009-12-22

    Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture are described. In one aspect, a document clustering method includes providing a document set comprising a plurality of documents, providing a cluster comprising a subset of the documents of the document set, using a plurality of terms of the documents, providing a cluster label indicative of subject matter content of the documents of the cluster, wherein the cluster label comprises a plurality of word senses, and selecting one of the word senses of the cluster label.

  5. Software-Defined Cluster

    Institute of Scientific and Technical Information of China (English)

    聂华; 杨晓君; 刘淘英

    2015-01-01

    The cluster architecture has played an important role in high-end computing for the past 20 years. With the advent of Internet services, big data, and cloud computing, traditional clusters face three challenges: 1) providing flexible system balance among computing, memory, and I/O capabilities;2) reducing resource pooling overheads;and 3) addressing low performance-power efficiency. This position paper proposes a software-defined cluster (SDC) architecture to deal with these challenges. The SDC architecture inherits two features of traditional cluster: its architecture is multicomputer and it has loosely-coupled interconnect. SDC provides two new mechanisms: global I/O space (GIO) and hardware-supported native access (HNA) to remote devices. Application software can define a virtual cluster best suited to its needs from resources pools provided by a physical cluster, and traditional cluster ecosystems need no modification. We also discuss a prototype design and implementation of a 32-processor cloud server utilizing the SDC architecture.

  6. Cluster knockout reactions

    Indian Academy of Sciences (India)

    Arun K Jain; B N Joshi

    2014-04-01

    Cluster knockout reactions are expected to reveal the amount of clustering (such as that of , d and even of heavier clusters such as 12C, 16O etc.) in the target nucleus. In simple terms, incident medium high-energy nuclear projectile interacts strongly with the cluster (present in the target nucleus) as if it were existing as a free entity. Theoretically, the relatively softer interactions of the two outgoing particles with the residual nucleus lead to optical distortions and are treated in terms of distorted wave (DW) formalism. The long-range projectile–cluster interaction is accounted for, in terms of the finite range (FR) direct reaction formalism, as against the more commonly adopted zero-range (ZR) distorted wave impulse approximation (DWIA) formalism. Comparison of the DWIA calculations with the observed data provide information about the momentum distribution and the clustering spectroscopic factor of the target nucleus. Interesting results and some recent advancements in the area of (, 2) reactions and heavy cluster knockout reactions are discussed. Importance of the finite-range vertex and the final-state interactions are brought out.

  7. Textile Industrial Clusters in China

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    "National Textile Industry Cluster Development Seminar" convened, held by China National Textile and Apparel Council, 23 cities and towns were awarded as China’s Textile Industry Cluster Pilot District. By far, China’s textile industrial clusters have grown

  8. Spanning Tree Based Attribute Clustering

    DEFF Research Database (Denmark)

    Zeng, Yifeng; Jorge, Cordero Hernandez

    2009-01-01

    inconsistent edges from a maximum spanning tree by starting appropriate initial modes, therefore generating stable clusters. It discovers sound clusters through simple graph operations and achieves significant computational savings. We compare the Star Discovery algorithm against earlier attribute clustering...

  9. Allodynia in Cluster Headache.

    Science.gov (United States)

    Wilbrink, Leopoldine A; Louter, Mark A; Teernstra, Onno Pm; van Zwet, Erik W; Huygen, Frank Jpm; Haan, Joost; Ferrari, Michel D; Terwindt, Gisela M

    2017-03-04

    Cutaneous allodynia is an established marker for central sensitization in migraine. There is debate whether cutaneous allodynia may also occur in cluster headache, another episodic headache disorder. Here we examined the presence and severity of allodynia in a large well-defined nation-wide population of people with cluster headache.Using validated questionnaires we assessed, cross-sectionally, ictal allodynia and comorbid depression and migraine in the nation-wide "Leiden University Cluster headache neuro-Analysis" (LUCA) study. Participants with cluster headache were diagnosed according to the International Classification of Headache Disorders criteria. Multivariate regression models were used, with correction for demographic factors and cluster headache subtype (chronic vs. episodic; recent attacks cluster headache responded of whom 218/606 (36%) had allodynia during attacks. Female gender (OR 2.05, 95% CI 1.28-3.29), low age at onset (OR 0.98, 95% CI 0.96- 0.99), lifetime depression (OR 1.63; 95% CI 1.06-2.50), comorbid migraine (OR 1.96; 95% CI 1.02-3.79), and having recent attacks (OR 1.80; 95% CI 1.13-2.86), but not duration of attacks and chronic cluster headache, were independent risk factors for allodynia.The high prevalence of cutaneous allodynia with similar risk factors for allodynia as found for migraine suggests that central sensitization, like in migraine, also occurs in cluster headache. In clinical practice, awareness that people with cluster headache may suffer from allodynia can in the future be an important feature in treatment options.

  10. [Pulmonary manifestations of polyvinyl chloride exposure].

    Science.gov (United States)

    Süyür, Hüseyin; Bayram, Nazan; Aydın, Neriman; Uyar, Meral; Gündoğdu, Nevhiz; Elbek, Osman

    2011-01-01

    There is currently no national data on the effects of polyvinyl chloride (PVC) exposure on pulmonary function. In this study we recruited workers and administrative staff from two PVC plants between July 2008 and July 2009. A questionnaire, pulmonary function tests, carbon monoxide diffusion capacity, and peak flows were recorded. Particulate matter analyses were performed by the Adana Central Laboratory of the Directorate of Occupational Health and Safety. Data were analyzed with SPSS 13.0 software. Nine of the 147 subjects were female. The incidence of a cough was more common in the administrative group. Of the study population, 59.1% were smokers. Tobacco addiction significantly increased cough and dyspnea [OR= 1.10 (1.00-1.20, 95% CI) p= 0.007 and OR= 1.08 (1.02-1.14, 95% CI), p= 0.008, respectively]. Dust exposure was correlated with the incidence of a cough [OR= 0.20 (0.04-0.80, 95% CI) p= 0.008]. The period of work correlated with sputum production [OR= 1.00 (1.00-1.02, 95% CI) p= 0.044]. The FVC% was significantly higher in the administrative group, and FEV1/FVC and DLCO were higher in the exposed group. Tobacco addiction increased the risk of airflow limitation, as evaluated by FEV1/FVC < 70% and FEF25-75 < 50% [OR= 1.15 (1.06-1.25, 95% CI) p= 0.001 and OR= 1.09 (1.02-1.17, 95% CI) p= 0.010, respectively]. Tobacco addiction and increasing duration of work had a negative influence on DLCO in the exposed group (r= -0.270, p= 0.025 and r= -0.210, p= 0.037). In the exposed group PEF variability was significantly greater on workdays, compared with rest days. This study shows that tobacco consumption has a greater affect on the airways than PVC dust exposure. A median of 36 months exposure to PVC dust had no significant impact on pulmonary function parameters, except for DLCO and PEF variability.

  11. Raspberry Pi super cluster

    CERN Document Server

    Dennis, Andrew K

    2013-01-01

    This book follows a step-by-step, tutorial-based approach which will teach you how to develop your own super cluster using Raspberry Pi computers quickly and efficiently.Raspberry Pi Super Cluster is an introductory guide for those interested in experimenting with parallel computing at home. Aimed at Raspberry Pi enthusiasts, this book is a primer for getting your first cluster up and running.Basic knowledge of C or Java would be helpful but no prior knowledge of parallel computing is necessary.

  12. Cluster modular autocontenido

    OpenAIRE

    2009-01-01

    Desde hace años es común en organizaciones educativas y de investigación el desarrollo de actividades que requieren grandes capacidades de cálculo. La solución más común a estas necesidades es la compra o construcción de un cluster HPC (High Performance Computing), pero construir un cluster acarrea problemas y costos inesperados problemas al momento de utilizarlo y mantenerlo en operaciones. Nuestro proyecto busca desarrollar y documentar técnicas para construir un cluster HPC que sea fácilme...

  13. Extending Beowulf Clusters

    Science.gov (United States)

    Steinwand, Daniel R.; Maddox, Brian; Beckmann, Tim; Hamer, George

    2003-01-01

    Beowulf clusters can provide a cost-effective way to compute numerical models and process large amounts of remote sensing image data. Usually a Beowulf cluster is designed to accomplish a specific set of processing goals, and processing is very efficient when the problem remains inside the constraints of the original design. There are cases, however, when one might wish to compute a problem that is beyond the capacity of the local Beowulf system. In these cases, spreading the problem to multiple clusters or to other machines on the network may provide a cost-effective solution.

  14. Introduction to cluster dynamics

    CERN Document Server

    Reinhard, Paul-Gerhard

    2008-01-01

    Clusters as mesoscopic particles represent an intermediate state of matter between single atoms and solid material. The tendency to miniaturise technical objects requires knowledge about systems which contain a ""small"" number of atoms or molecules only. This is all the more true for dynamical aspects, particularly in relation to the qick development of laser technology and femtosecond spectroscopy. Here, for the first time is a highly qualitative introduction to cluster physics. With its emphasis on cluster dynamics, this will be vital to everyone involved in this interdisciplinary subje

  15. ClusterAlive

    Science.gov (United States)

    Caruso, G.; Arezzini, S.; Ciampa, A.; Formuso, A.; Mazzoni, E.

    2015-12-01

    INFN-Pisa Scientific Computing Center is working from many years both in GRID and HPC computing. The monitoring and managing tools have been key components of the center's successful operation. The lessons learned from the use of standard tools, such as Ganglia, have been starting points for the development of new tools specific for our infrastructure. In this note we will illustrate the integration of many different monitoring tools in one single platform called ClusterAlive. Aim of ClusterAlive is to increase the HPC cluster performance and simplify maintenance operations, possibly in a proactive approach.

  16. From collisions to clusters

    DEFF Research Database (Denmark)

    Loukonen, Ville; Bork, Nicolai; Vehkamaki, Hanna

    2014-01-01

    -principles molecular dynamics collision simulations of (sulphuric acid)1(water)0, 1 + (dimethylamine) → (sulphuric acid)1(dimethylamine)1(water)0, 1 cluster formation processes. The simulations indicate that the sticking factor in the collisions is unity: the interaction between the molecules is strong enough...... to overcome the possible initial non-optimal collision orientations. No post-collisional cluster break up is observed. The reasons for the efficient clustering are (i) the proton transfer reaction which takes place in each of the collision simulations and (ii) the subsequent competition over the proton...

  17. Negotiating Cluster Boundaries

    DEFF Research Database (Denmark)

    Giacomin, Valeria

    2017-01-01

    Palm oil was introduced to Malay(si)a as an alternative to natural rubber, inheriting its cluster organizational structure. In the late 1960s, Malaysia became the world’s largest palm oil exporter. Based on archival material from British colonial institutions and agency houses, this paper focuses...... on the governance dynamics that drove institutional change within this cluster during decolonization. The analysis presents three main findings: (i) cluster boundaries are defined by continuous tug-of-war style negotiations between public and private actors; (ii) this interaction produces institutional change...

  18. Combining cluster number counts and galaxy clustering

    Science.gov (United States)

    Lacasa, Fabien; Rosenfeld, Rogerio

    2016-08-01

    The abundance of clusters and the clustering of galaxies are two of the important cosmological probes for current and future large scale surveys of galaxies, such as the Dark Energy Survey. In order to combine them one has to account for the fact that they are not independent quantities, since they probe the same density field. It is important to develop a good understanding of their correlation in order to extract parameter constraints. We present a detailed modelling of the joint covariance matrix between cluster number counts and the galaxy angular power spectrum. We employ the framework of the halo model complemented by a Halo Occupation Distribution model (HOD). We demonstrate the importance of accounting for non-Gaussianity to produce accurate covariance predictions. Indeed, we show that the non-Gaussian covariance becomes dominant at small scales, low redshifts or high cluster masses. We discuss in particular the case of the super-sample covariance (SSC), including the effects of galaxy shot-noise, halo second order bias and non-local bias. We demonstrate that the SSC obeys mathematical inequalities and positivity. Using the joint covariance matrix and a Fisher matrix methodology, we examine the prospects of combining these two probes to constrain cosmological and HOD parameters. We find that the combination indeed results in noticeably better constraints, with improvements of order 20% on cosmological parameters compared to the best single probe, and even greater improvement on HOD parameters, with reduction of error bars by a factor 1.4-4.8. This happens in particular because the cross-covariance introduces a synergy between the probes on small scales. We conclude that accounting for non-Gaussian effects is required for the joint analysis of these observables in galaxy surveys.

  19. Aspergilli Response to Benzalkonium Chloride and Novel-Synthesized Fullerenol/Benzalkonium Chloride Nanocomposite

    Directory of Open Access Journals (Sweden)

    Nikola Unković

    2015-01-01

    Full Text Available A comprehensive comparative analysis of antifungal potential of benzalkonium chloride and newly synthesized fullerenol/benzalkonium chloride nanocomposite was conducted to assess the possible impact of carbon-based nanocarrier on antimicrobial properties of the commonly used biocide. Physical characterization of synthesized nanocomposite showed zeta potential of +37.4 mV and inhomogeneous particles size distribution, with nanocomposite particles’ dimensions within 30–143 nm and maximum number of particles at 44 nm. The effect of pure and fullerenol nanocarrier-bound biocide was evaluated in eight Aspergillus species. In mycelial growth assay, nanocomposite was more potent, as fungicidal effect of 1.04/0.6 μg mL−1 was obtained in all but one of the isolates (A. niger, while proportional concentration of pure biocide (0.6 μg mL−1 completely inhibited mycelial growth of only three Aspergillus species. However, conidia appear to be less susceptible to nanocomposite treatment, as lower fungistatic (MIC and fungicidal (MFC concentrations were obtained with biocide alone (MIC in range from 0.03 to 0.15 μg mL−1 and MFC from 0.075 to 0.45 μg mL−1. To a different degree, both substances stimulated aflatoxin B1 production and inhibited ochratoxin A synthesis. Very low mycelium biomass yield, in range from 1.0 to 3.0 mg dry weight, was documented in both biocide and nanocomposite enriched medium.

  20. Evolution of clustered storage

    CERN Document Server

    CERN. Geneva; Van de Vyvre, Pierre

    2007-01-01

    The session actually featured two presentations: * Evolution of clustered storage by Lance Hukill, Quantum Corporation * ALICE DAQ - Usage of a Cluster-File System: Quantum StorNext by Pierre Vande Vyvre, CERN-PH the second one prepared at short notice by Pierre (thanks!) to present how the Quantum technologies are being used in the ALICE experiment. The abstract to Mr Hukill's follows. Clustered Storage is a technology that is driven by business and mission applications. The evolution of Clustered Storage solutions starts first at the alignment between End-users needs and Industry trends: * Push-and-Pull between managing for today versus planning for tomorrow * Breaking down the real business problems to the core applications * Commoditization of clients, servers, and target devices * Interchangeability, Interoperability, Remote Access, Centralized control * Oh, and yes, there is a budget and the "real world" to deal with This presentation will talk through these needs and trends, and then ask the question, ...

  1. Improved graph clustering

    Science.gov (United States)

    2013-01-01

    on Facebook , one would like to detect tightly connected communities, which is useful for subsequent tasks like customized recommendation and... advertisement . Graphs in modern applications have several characteristics that complicate graph clustering: • Small density gap: the edge density across

  2. Clustering of Emerging Flux

    Science.gov (United States)

    Ruzmaikin, A.

    1997-01-01

    Observations show that newly emerging flux tends to appear on the Solar surface at sites where there is flux already. This results in clustering of solar activity. Standard dynamo theories do not predict this effect.

  3. How Clusters Work

    Science.gov (United States)

    Technology innovation clusters are geographic concentrations of interconnected companies, universities, and other organizations with a focus on environmental technology. They play a key role in addressing the nation’s pressing environmental problems.

  4. Clustering in Ethiopia

    African Journals Online (AJOL)

    Information Systems (GIS) that can process the data may not be available and accessible where ... Methods: An example of space-time clustering of malaria cases around a dam in Ethiopia (106 .... was prepared for publication using mapping.

  5. APROACHES TOWARDS CLUSTER ANALYSIS

    National Research Council Canada - National Science Library

    Manuela Tvaronaviciene; Kristina Razminiene; Leonardo Piccinetti

    2015-01-01

    .... The findings indicate that case study is used in many articles refering to cluster research. Other methods, such as analysis, interview, survey, research, equation and others are used to support case study...

  6. Development and critical evaluation of fluorescent chloride nanosensors.

    Science.gov (United States)

    Graefe, Anja; Stanca, Sarmiza E; Nietzsche, Sandor; Kubicova, Lenka; Beckert, Rainer; Biskup, Christoph; Mohr, Gerhard J

    2008-09-01

    In this study, we describe the preparation and evaluation of new fluorescent sensor nanoparticles for the ratiometric measurement of chloride concentrations. Both a chloride-sensitive dye (lucigenin) and a reference dye (sulforhodamine derivative) were incorporated into polyacrylamide nanoparticles via inverse microemulsion polymerization and investigated for their response to chloride ions in buffered suspension as well as in living cells. The fluorescence intensity of lucigenin reversibly decreased in the presence of chloride ions due to a collisional quenching process, which can be described with the Stern-Volmer equation. The determined Stern-Volmer constant K SV for the quenching of lucigenin incorporated into particles was found to be 53 M (-1) and is considerably smaller than the Stern-Volmer constant for quenching of free lucigenin ( K SV = 250 M (-1)) under the same conditions. To test the nanosensors in living cells, we incorporated them into Chinese hamster ovary cells and mouse fibroblasts by using the conventional lipofectamin technique and monitored the response to changing chloride concentrations in the cell.

  7. Antiangiogenic activity of 2-formyl-8-hydroxy-quinolinium chloride.

    Science.gov (United States)

    Lam, K-H; Lee, K K-H; Kok, S H-L; Wong, R S-M; Lau, F-Y; Cheng, G Y-M; Wong, W-Y; Tong, S-W; Chan, K-W; Chan, R Y-K; Tang, J C-O; Cheng, C-H; Hau, D K-P; Bian, Z-X; Gambari, R; Chui, C-H

    2016-05-01

    Tumour growth is closely related to the development of new blood vessels to supply oxygen and nutrients to cancer cells. Without the neovascular formation, tumour volumes cannot increase and undergo metastasis. Antiangiogenesis is one of the most promising approaches for antitumour therapy. The exploration of new antiangiogenic agents would be helpful in antitumour therapy. Quinoline is an aromatic nitrogen compound characterized by a double-ring structure which exhibits a benzene ring fused to pyridine at two adjacent carbon atoms. The high stability of quinoline makes it preferable in a variety of therapeutic and pharmaceutical applications, including antitumour treatment. This work is to examine the potential antiangiogenic activity of the synthetic compound 2-Formyl-8-hydroxy-quinolinium chloride. We found that 2-Formyl-8-hydroxy-quinolinium chloride could inhibit the growth of human umbilical vein endothelial cells in vitro. Using the diethylnitrosamine-induced hepatocarcinogenesis model, 2-Formyl-8-hydroxy-quinolinium chloride showed strong antiangiogenic activity. Furthermore, 2-Formyl-8-hydroxy-quinolinium chloride could inhibit the growth of large Hep3B xenografted tumour from the nude mice. We assume that 2-Formyl-8-hydroxy-quinolinium chloride could be a potential antiangiogenic and antitumour agent and it is worthwhile to further study its underlying working mechanism. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  8. The Chloride Permeability of Persulphated Phosphogypsum-Slag Cement Concrete

    Institute of Scientific and Technical Information of China (English)

    HUANG Youqiang; LU Jianxin; CHEN Feixiang; SHUI Zhonghe

    2016-01-01

    The chloride permeability and microstructure of persulphated phosphogypsum-slag cement concrete (PPSCC), the Portland slag cement concrete (PSCC) and ordinary Portland cement concrete (OPCC) were investigated comparatively. Some test methods were used to evaluate the chloride permeability and explain the relationship between the permeability and microstructure of concrete. The results show that the resistance to chloride penetration in PPSCC is signiifcantly better than that in OPCC, the reasons are as follows: 1) the slag in PPSCC is activated by clinker (alkali activation) and phosphogypsum (sulfate activation), forming more low Ca/Si C-S-H gel and gel pores below 10 nm than OPCC, improving the resistance to chloride penetration; 2) the hydration products of PPSCC have a much stronger binding capacity for chloride ions; and 3) in the same mix proportion, PPSCC has a better workability without large crystals calcium hydroxide in the hydration products, the interfacial transition zone (ITZ) is smoother and denser, which can cut off the communicating pores between the pastes and aggregates.

  9. Microstructural Evolution of Chloride-Cleaned Silicon Carbide Aluminum Composites

    Science.gov (United States)

    Adeosun, S. O.; Akpan, E. I.; Gbenebor, O. P.; Balogun, S. A.

    2016-02-01

    This study examines the synergy between reinforcement surface modifications on the evolution of microstructures of AA6011-silicon carbide particle (SiCp) composites in multidirectional solidification. Silicon carbide particles (SiCp) were cleaned with ammonium chloride, tin(II) chloride, sodium chloride, and palladium(II) chloride and used as reinforcement to cast AA6011-SiCp composites by applying the stir casting method. A scanning electron microscope and x-ray diffractometer were used to investigate the morphology and phases present, respectively, in the composite material. Results show that wetting agents were effective as they inhibited the formation of Al4C3 in all modified composites. The modified SiCp was found to have varying effects on the morphology, dendrite arm size and direction, size and configuration of AlFeSi, and the amount of eutectic silicon depending on the concentration of the reagent and cleaning time. The highest effect was shown by the use of 40 g/L of tin(II) chloride. The composites had short dendritic arms, good interfacial interaction, and only a few crystals of AlFeSi.

  10. Interactions between chloride and cement-paste materials.

    Science.gov (United States)

    Barberon, Fabien; Baroghel-Bouny, Véronique; Zanni, Hélène; Bresson, Bruno; d'Espinose de la Caillerie, Jean-Baptiste; Malosse, Lucie; Gan, Zehong

    2005-02-01

    The durability of cement-based materials with respect to exterior aggressions is one of the current priorities in civil engineering. Depending on their use, the cement-based materials can be exposed to different types of aggressive environments. For instance, damages to concrete structures in contact with a saline environment (sea water on bridges, deicing salts on roads, etc.) are of utmost importance. Upon exposure to saline water, Cl- ions penetrate into the structures and subsequently lead to reinforcement corrosion. Chloride attack is often combined with other aggressive influences such as temperature (e.g., freezing) or the ingress of other ions (e.g., sulfates in sea water). We therefore aim to explore the effect of sodium chloride (NaCl) on the structural chemistry of cement paste. Existing studies about reinforcement corrosion by chloride have focused on the penetration of Cl- ions and the comparison between "free" ions (water-soluble ions) and bound ones. However, little is known about the fixation mechanisms, the localization of Cl in the cement matrix and the structural interaction between Cl and the silicate and aluminate hydrate phases present in cement paste. We present here results of a multinuclear nuclear magnetic resonance study on the fixation of chloride in the hydration products and the characterization of new phases potentially appearing due to chloride ingress.

  11. Enhancement of trichothecene production in Fusarium graminearum by cobalt chloride.

    Science.gov (United States)

    Tsuyuki, Rie; Yoshinari, Tomoya; Sakamoto, Naoko; Nagasawa, Hiromichi; Sakuda, Shohei

    2011-03-09

    The effects of cobalt chloride on the production of trichothecene and ergosterol in Fusarium graminearum were examined. Incorporation experiments with (13)C-labeled acetate and leucine confirmed that both 3-acetyldeoxynivalenol and ergosterol were biosynthesized via a mevalonate pathway by the fungus, although hydroxymethyl-glutaryl CoA (HMG-CoA) from intact leucine was able to be partially used for ergosterol production. Addition of cobalt chloride at concentrations of 3-30 μM into liquid culture strongly enhanced 3-acetyldeoxynivalenol production by the fungus, whereas the amount of ergosterol and the mycelial weight of the fungus did not change. The mRNA levels of genes encoding trichothecene biosynthetic proteins (TRI4 and TRI6), ergosterol biosynthetic enzymes (ERG3 and ERG25), and enzymes involved in the mevalonate pathway (HMG-CoA synthase (HMGS) and HMG-CoA reductase (HMGR)) were all strongly up-regulated in the presence of cobalt chloride. Precocene II, a specific trichothecene production inhibitor, suppressed the effects of cobalt chloride on Tri4, Tri6, HMGS, and HMGR, but did not affect erg3 and erg25. These results indicate that cobalt chloride is useful for investigating regulatory mechanisms of trichothecene and ergosterol production in F. graminearum.

  12. Myotonic discharges discriminate chloride from sodium muscle channelopathies.

    Science.gov (United States)

    Drost, Gea; Stunnenberg, Bas C; Trip, Jeroen; Borm, George; McGill, Kevin C; Ginjaar, Ieke H B; van der Kooi, Arendina W; Zwarts, Machiel J; van Engelen, Baziel G M; Faber, Catharina G; Stegeman, Dick F; Lateva, Zoia

    2015-01-01

    Non-dystrophic myotonic syndromes represent a heterogeneous group of clinically quite similar diseases sharing the feature of myotonia. These syndromes can be separated into chloride and sodium channelopathies, with gene-defects in chloride or sodium channel proteins of the sarcolemmal membrane. Myotonia has its basis in an electrical instability of the sarcolemmal membrane. In the present study we examine the discriminative power of the resulting myotonic discharges for these disorders. Needle electromyography was performed by an electromyographer blinded for genetic diagnosis in 66 non-dystrophic myotonia patients (32 chloride and 34 sodium channelopathy). Five muscles in each patient were examined. Individual trains of myotonic discharges were extracted and analyzed with respect to firing characteristics. Myotonic discharge characteristics in the rectus femoris muscle almost perfectly discriminated chloride from sodium channelopathy patients. The first interdischarge interval as a single variable was longer than 30 ms in all but one of the chloride channelopathy patients and shorter than 30 ms in all of the sodium channelopathy patients. This resulted in a detection rate of over 95%. Myotonic discharges of a single muscle can be used to better guide toward a molecular diagnosis in non-dystrophic myotonic syndromes. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Elusive Presence of Chloride in Mixed Halide Perovskite Solar Cells.

    Science.gov (United States)

    Colella, Silvia; Mosconi, Edoardo; Pellegrino, Giovanna; Alberti, Alessandra; Guerra, Valentino L P; Masi, Sofia; Listorti, Andrea; Rizzo, Aurora; Condorelli, Guglielmo Guido; De Angelis, Filippo; Gigli, Giuseppe

    2014-10-16

    The role of chloride in the MAPbI3-xClx perovskite is still limitedly understood, albeit subjected of much debate. Here, we present a combined angle-resolved X-ray photoelectron spectroscopy (AR-XPS) and first-principles DFT modeling to investigate the MAPbI3-xClx/TiO2 interface. AR-XPS analyses carried out on ad hoc designed bilayers of MAPbI3-xClx perovskite deposited onto a flat TiO2 substrate reveal that the chloride is preferentially located in close proximity to the perovskite/TiO2 interface. DFT calculations indicate the preferential location of chloride at the TiO2 interface compared to the bulk perovskite due to an increased chloride-TiO2 surface affinity. Furthermore, our calculations clearly demonstrate an interfacial chloride-induced band bending, creating a directional "electron funnel" that may improve the charge collection efficiency of the device and possibly affecting also recombination pathways. Our findings represent a step forward to the rationalization of the peculiar properties of mixed halide perovskite, allowing one to further address material and device design issues.

  14. Parallel Wolff Cluster Algorithms

    Science.gov (United States)

    Bae, S.; Ko, S. H.; Coddington, P. D.

    The Wolff single-cluster algorithm is the most efficient method known for Monte Carlo simulation of many spin models. Due to the irregular size, shape and position of the Wolff clusters, this method does not easily lend itself to efficient parallel implementation, so that simulations using this method have thus far been confined to workstations and vector machines. Here we present two parallel implementations of this algorithm, and show that one gives fairly good performance on a MIMD parallel computer.

  15. Magnetic cluster excitations

    Science.gov (United States)

    Furrer, Albert; Waldmann, Oliver

    2013-01-01

    Magnetic clusters, i.e., assemblies of a finite number (between two or three and several hundred) of interacting spin centers which are magnetically decoupled from their environment, can be found in many materials ranging from inorganic compounds and magnetic molecules to artificial metal structures formed on surfaces and metalloproteins. Their magnetic excitation spectra are determined by the nature of the spin centers and of the magnetic interactions, and the particular arrangement of the mutual interaction paths between the spin centers. Small clusters of up to four magnetic ions are ideal model systems in which to examine the fundamental magnetic interactions, which are usually dominated by Heisenberg exchange, but often complemented by anisotropic and/or higher-order interactions. In large magnetic clusters, which may potentially deal with a dozen or more spin centers, there is the possibility of novel many-body quantum states and quantum phenomena. In this review the necessary theoretical concepts and experimental techniques to study the magnetic cluster excitations and the resulting characteristic magnetic properties are introduced, followed by examples of small clusters, demonstrating the enormous amount of detailed physical information that can be retrieved. The current understanding of the excitations and their physical interpretation in the molecular nanomagnets which represent large magnetic clusters is then presented, with a section devoted to the subclass of single-molecule magnets, distinguished by displaying quantum tunneling of the magnetization. Finally, there is a summary of some quantum many-body states which evolve in magnetic insulators characterized by built-in or field-induced magnetic clusters. The review concludes by addressing future perspectives in the field of magnetic cluster excitations.

  16. Cauchy cluster process

    DEFF Research Database (Denmark)

    Ghorbani, Mohammad

    2013-01-01

    In this paper we introduce an instance of the well-know Neyman–Scott cluster process model with clusters having a long tail behaviour. In our model the offspring points are distributed around the parent points according to a circular Cauchy distribution. Using a modified Cramér-von Misses test st...... statistic and the simulated pointwise envelopes it is shown that this model fits better than the Thomas process to the frequently analyzed long-leaf pine data-set....

  17. Globular clusters with Gaia

    Science.gov (United States)

    Pancino, E.; Bellazzini, M.; Giuffrida, G.; Marinoni, S.

    2017-01-01

    The treatment of crowded fields in Gaia data will only be a reality in a few years from now. In particular, for globular clusters, only the end-of-mission data (public in 2022-2023) will have the necessary full crowding treatment and will reach sufficient quality for the faintest stars. As a consequence, the work on the deblending and decontamination pipelines is still ongoing. We describe the present status of the pipelines for different Gaia instruments, and we model the end-of-mission crowding errors on the basis of available information. We then apply the nominal post-launch Gaia performances, appropriately worsened by the estimated crowding errors, to a set of 18 simulated globular clusters with different concentration, distance, and field contamination. We conclude that there will be 103-104 stars with astrometric performances virtually untouched by crowding (contaminated by <1 mmag) in the majoritiy of clusters. The most limiting factor will be field crowding, not cluster crowding: the most contaminated clusters will only contain 10-100 clean stars. We also conclude that: (i) the systemic proper motions and parallaxes will be determined to 1% or better up to ≃15 kpc, and the nearby clusters will have radial velocities to a few km s-1 ; (ii) internal kinematics will be of unprecendented quality, cluster masses will be determined to ≃10% up to 15 kpc and beyond, and it will be possible to identify differences of a few km s-1 or less in the kinematics (if any) of cluster sub-populations up to 10 kpc and beyond; (iii) the brightest stars (V≃17 mag) will have space-quality, wide-field photometry (mmag errors), and all Gaia photometry will have 1-3% errors on the absolute photometric calibration.

  18. Cosmography with Galaxy Clusters

    CERN Document Server

    Soares-Santos, M; La Barbera, F; Lopes, P A A; Annis, J

    2008-01-01

    In the present work we focus on future experiments using cluster abundance observations to constraint the Dark Energy equation of state parameter, w. To obtain tight constraints from this kind of experiment, a reliable sample of galaxy clusters must be obtained from deep and wide-field images. We therefore present the computational environment (2DPHOT) that allow us to build the galaxy catalog from the images and the Voronoi Tessellation cluster finding algorithm that we use to identify the galaxy clusters on those catalogs. To test our pipeline with data similar in quality to what will be gathered by future wide field surveys, we process images from the Deep fields obtained as part of the LEGACY Survey (four fields of one square degree each, in five bands, with depth up to r'=25). We test our cluster finder by determining the completeness and purity of the finder when applied to mock galaxy catalogs made for the Dark Energy Survey cluster finder comparison project by Risa Wechsler and Michael Busha. This pro...

  19. Galaxy cluster's rotation

    CERN Document Server

    Manolopoulou, Maria

    2016-01-01

    We study the possible rotation of cluster galaxies, developing, testing and applying a novel algorithm which identifies rotation, if such does exits, as well as its rotational centre, its axis orientation, rotational velocity amplitude and, finally, the clockwise or counterclockwise direction of rotation on the plane of the sky. To validate our algorithms we construct realistic Monte-Carlo mock rotating clusters and confirm that our method provides robust indications of rotation. We then apply our methodology on a sample of Abell clusters with z<~0.1 with member galaxies selected from the SDSS DR10 spectroscopic database. We find that ~35% of our clusters are rotating when using a set of strict criteria, while loosening the criteria we find this fraction increasing to ~48%. We correlate our rotation indicators with the cluster dynamical state, provided either by their Bautz-Morgan type or by their X-ray isophotal shape and find for those clusters showing rotation that the significance and strength of their...

  20. Cluster functional renormalization group

    Science.gov (United States)

    Reuther, Johannes; Thomale, Ronny

    2014-01-01

    Functional renormalization group (FRG) has become a diverse and powerful tool to derive effective low-energy scattering vertices of interacting many-body systems. Starting from a free expansion point of the action, the flow of the RG parameter Λ allows us to trace the evolution of the effective one- and two-particle vertices towards low energies by taking into account the vertex corrections between all parquet channels in an unbiased fashion. In this work, we generalize the expansion point at which the diagrammatic resummation procedure is initiated from a free UV limit to a cluster product state. We formulate a cluster FRG scheme where the noninteracting building blocks (i.e., decoupled spin clusters) are treated exactly, and the intercluster couplings are addressed via RG. As a benchmark study, we apply our cluster FRG scheme to the spin-1/2 bilayer Heisenberg model (BHM) on a square lattice where the neighboring sites in the two layers form the individual two-site clusters. Comparing with existing numerical evidence for the BHM, we obtain reasonable findings for the spin susceptibility, the spin-triplet excitation energy, and quasiparticle weight even in coupling regimes close to antiferromagnetic order. The concept of cluster FRG promises applications to a large class of interacting electron systems.

  1. Cluster bomb ocular injuries

    Directory of Open Access Journals (Sweden)

    Ahmad M Mansour

    2012-01-01

    Full Text Available Purpose: To present the visual outcomes and ocular sequelae of victims of cluster bombs. Materials and Methods: This retrospective, multicenter case series of ocular injury due to cluster bombs was conducted for 3 years after the war in South Lebanon (July 2006. Data were gathered from the reports to the Information Management System for Mine Action. Results: There were 308 victims of clusters bombs; 36 individuals were killed, of which 2 received ocular lacerations and; 272 individuals were injured with 18 receiving ocular injury. These 18 surviving individuals were assessed by the authors. Ocular injury occurred in 6.5% (20/308 of cluster bomb victims. Trauma to multiple organs occurred in 12 of 18 cases (67% with ocular injury. Ocular findings included corneal or scleral lacerations (16 eyes, corneal foreign bodies (9 eyes, corneal decompensation (2 eyes, ruptured cataract (6 eyes, and intravitreal foreign bodies (10 eyes. The corneas of one patient had extreme attenuation of the endothelium. Conclusions: Ocular injury occurred in 6.5% of cluster bomb victims and 67% of the patients with ocular injury sustained trauma to multiple organs. Visual morbidity in civilians is an additional reason for a global ban on the use of cluster bombs.

  2. Determination of atomic cluster structure with cluster fusion algorithm

    DEFF Research Database (Denmark)

    Obolensky, Oleg I.; Solov'yov, Ilia; Solov'yov, Andrey V.

    2005-01-01

    We report an efficient scheme of global optimization, called cluster fusion algorithm, which has proved its reliability and high efficiency in determination of the structure of various atomic clusters.......We report an efficient scheme of global optimization, called cluster fusion algorithm, which has proved its reliability and high efficiency in determination of the structure of various atomic clusters....

  3. Synthesis, characterization, and reactivity of sulfided hexanuclear molybdenum cluster compounds

    Energy Technology Data Exchange (ETDEWEB)

    Spink, D.

    1990-09-21

    Hexanuclear molybdenum clusters with mixed chloride and sulfide bridging ligands were prepared by reacting {alpha}-MoCl{sub 2} with sodium hydrosulfide in the presence of sodium butoxide. The resulting species, Mo{sub 6}Cl{sub (8-x)}S{sub x}{center dot}npy(x {congruent} 3.6, n {congruent} 4, py = pyridine), was pyrophoric and insoluble. The mixed sulfide chloride cluster species Mo{sub 6}S{sub 4}Cl{sub 4}{center dot}6OPEt{sub 3} and Mo{sub 6}S{sub {approximately}5}Cl{sub {approximately}3}{center dot}6PEt{sub 3} and Mo{sub 6}S{sub 8}{center dot}6PEt{sub 3} were isolated and characterized. Phosphorus-31 nuclear magnetic resonance, electron paramagnetic resonance, and UV/visible spectra were obtained for each fraction. The completely sulfided cluster, Mo{sub 6}S{sub 8}{center dot}6PEt{sub 3}, was prepared similarly and used in various experiments as a possible precursor to Chevrel phase materials of the type Mo{sub 6}S{sub 8}or M{sub n}Mo{sub 6}S{sub 8}. With the goal of removing all of the triethylphosphine ligands, Mo{sub 6}S{sub 8}{center dot}6PEt{sub 3} was reacted with the transition metal carbonyls molybdenum hexacarbonyl and dicobalt octacarbonyl. Reaction on the molecular sulfide cluster with copper(I) chloride in toluene gave a completely insoluble product. The reaction of Mo{sub 6}S{sub 8}{center dot}6PEt{sub 3} with propylene sulfide gave a product whose infrared spectra showed only very weak peaks associated with coordinated triethylphosphine. The elemental analysis of this product fit the formula Mo{sub 6}S{sub 8}{center dot}5SPEt{sub 3}. Reactivity of the outer ligands of the Mo{sub 6}S{sub 8}{center dot}npy and Mo{sub 6}S{sub 8}{center dot}(6{minus}x)PrNH{sub x} clusters were investigated. Crystalline Mo{sub 6}S{sub 8}{center dot}6THT was recovered from the reaction of the n-propylamine derivative with THT. A crystal structure determination was done. 87 refs., 12 fig., 15 tabs.

  4. Chloride channels of platelets%血小板氯通道

    Institute of Scientific and Technical Information of China (English)

    陈晓琳; 尹松梅

    2004-01-01

    Chloride channels distribute widely in the body, and participate in many physiological actions and regulatory processes. Based on their physiological roles and molecular structures, six kinds of chloride channels have been identified: (1) The chloride channels family; (2) Cystic fibrosis transmembrane conductance regulator; (3) Swelling-activated chloride channels; (4) Calcium-activated chloride channels; (5) The p64 (CLIC) gene family; (6) γ-aminobutyric acid and glycine receptors. The chloride channels do exist in platelets, and their appearances are dependent on the presence of intracellular calcium. Blocking agents of chloride channels inhibit the thrombin-activated platelet aggregation and the elevation of the intracellular calcium concentration in a dose-dependent manner. It is suggested that chloride channels play a role in the activation of platelets. In addition, chloride channels act on both the cell volume regulation and the intracellular pH regulation in platelets.

  5. Separating refractory and non-refractory particulate chloride and estimating chloride depletion by aerosol mass spectrometry in a marine environment

    Directory of Open Access Journals (Sweden)

    I. Nuaaman

    2015-01-01

    Full Text Available Aerosol composition and concentration measurements along the coast of California were obtained using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-AMS onboard the research vessel Atlantis during the CalNex study in 2010. This paper focuses on the measurement of aerosol chloride using the HR-AMS that can be ambiguous in regions with significant quantities of sea salt aerosols. This ambiguity arises due to large differences in the sensitivity of the HR-AMS to refractory chloride species (i.e., NaCl and non refractory chloride species (i.e., NH4Cl, HCl, etc.. Using the HR-AMS, the aerosol chloride signal is typically quantified using ion signals for 35Cl+, H35Cl+, 37Cl+ and H37Cl+ (HxCl+. During this study, the highest aerosol chloride signal was observed during sea sweep experiments when the source of the aerosol chloride was NaCl present in artificially generated sea salt aerosols even though the HR-AMS has significantly lower sensitivity to such refractory species. Other prominent ion signals that arise from NaCl salt were also observed at m/z 22.99 for Na+ and m/z 57.96 for Na35Cl+ during both sea sweep experiments and during periods of ambient measurements. Thus, refractory NaCl contributes significantly to the HxCl+ signal, interfering with attempts to quantify non sea salt chloride (nssCl. It was found that during ambient aerosol measurements, the interference in the HxCl+ signal from sea salt chloride (ssCl was as high as 89%, but with a study wide average of 10%. The Na35Cl+ ion signal was found to be a good tracer for NaCl. We outline a method to establish nssCl in the ambient aerosols by subtracting the sea salt chloride (ssCl signal from the HxCl+ signal. The ssCl signal is derived from the Na35Cl+ ion tracer signal and the HxCl+ to Na35Cl+ ratio established from the sea sweep experiments. Ambient submicron concentrations of ssCl were also established using the

  6. Cluster fusion algorithm: application to Lennard-Jones clusters

    DEFF Research Database (Denmark)

    Solov'yov, Ilia; Solov'yov, Andrey V.; Greiner, Walter

    2008-01-01

    paths up to the cluster size of 150 atoms. We demonstrate that in this way all known global minima structures of the Lennard-Jones clusters can be found. Our method provides an efficient tool for the calculation and analysis of atomic cluster structure. With its use we justify the magic number sequence...... for the clusters of noble gas atoms and compare it with experimental observations. We report the striking correspondence of the peaks in the dependence of the second derivative of the binding energy per atom on cluster size calculated for the chain of the Lennard-Jones clusters based on the icosahedral symmetry......We present a new general theoretical framework for modelling the cluster structure and apply it to description of the Lennard-Jones clusters. Starting from the initial tetrahedral cluster configuration, adding new atoms to the system and absorbing its energy at each step, we find cluster growing...

  7. Cluster fusion algorithm: application to Lennard-Jones clusters

    DEFF Research Database (Denmark)

    Solov'yov, Ilia; Solov'yov, Andrey V.; Greiner, Walter

    2006-01-01

    paths up to the cluster size of 150 atoms. We demonstrate that in this way all known global minima structures of the Lennard-Jones clusters can be found. Our method provides an efficient tool for the calculation and analysis of atomic cluster structure. With its use we justify the magic number sequence...... for the clusters of noble gas atoms and compare it with experimental observations. We report the striking correspondence of the peaks in the dependence of the second derivative of the binding energy per atom on cluster size calculated for the chain of the Lennard-Jones clusters based on the icosahedral symmetry......We present a new general theoretical framework for modelling the cluster structure and apply it to description of the Lennard-Jones clusters. Starting from the initial tetrahedral cluster configuration, adding new atoms to the system and absorbing its energy at each step, we find cluster growing...

  8. Optimization of the lithium/thionyl chloride battery

    Science.gov (United States)

    White, Ralph E.

    1989-01-01

    A 1-D math model for the lithium/thionyl chloride primary cell is used in conjunction with a parameter estimation technique in order to estimate the electro-kinetic parameters of this electrochemical system. The electro-kinetic parameters include the anodic transfer coefficient and exchange current density of the lithium oxidation, alpha sub a,1 and i sub o,i,ref, the cathodic transfer coefficient and the effective exchange current density of the thionyl chloride reduction, alpha sub c,2 and a sup o i sub o,2,ref, and a morphology parameter, Xi. The parameter estimation is performed on simulated data first in order to gain confidence in the method. Data, reported in the literature, for a high rate discharge of an experimental lithium/thionyl chloride cell is used for an analysis.

  9. Stochastic Models for Chloride-Initiated Corrosion in Reinforced Concrete

    DEFF Research Database (Denmark)

    Engelund, Svend; Sørensen, John Dalsgaard

    Corrosion of the reinforcement in concrete structures can lead to a substantial decrease of the load-bearing capacity. One mode of corrosion initiation is when the chloride content around the reinforcement exceeds a threshold value. In the present paper a statistical model is developed by which t...... the chloride content in a 1reinforced concrete structure can be predicted. The model parameters are estimated on the basis of measurements. The distribution of the time to initiation of corrosion is estimated by FORMISORM-analysis.......Corrosion of the reinforcement in concrete structures can lead to a substantial decrease of the load-bearing capacity. One mode of corrosion initiation is when the chloride content around the reinforcement exceeds a threshold value. In the present paper a statistical model is developed by which...

  10. Binder content influences on chloride ingress in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Dhir, R.K.; Jones, M.R.; McCarthy, M.J. [Univ. of Dundee (United Kingdom)

    1996-12-01

    The reported study looked at the effect of reducing free water contents, and thereby binder contents, and thereby binder contents, on the ingress of chloride in concrete. Concretes with equal water/binder ratio (and design strength), but with water contents reduced by up to 30 liters/m{sup 3}, were tested for chloride diffusion (D) and penetration. The quality of the microstructure was inferred from initial surface absorption tests (ISAT). The results show no practical difference in chloride durability between the corresponding concretes, and that reducing the binder content, (providing that the water/binder ratio is maintained) is not likely to be detrimental. However, the results reported underline the importance of binder type, in this case PFA. Implications of the results are discussed and, in light of the findings, whether specifications which demand minimum cement contents are justified.

  11. Role of Quercetin in Modulating Chloride Transport in the Intestine

    Science.gov (United States)

    Yu, Bo; Jiang, Yu; Jin, Lingling; Ma, Tonghui; Yang, Hong

    2016-01-01

    Epithelial chloride channels provide the pathways for fluid secretion in the intestine. Cystic fibrosis transmembrane conductance regulator (CFTR) and calcium-activated chloride channels (CaCCs) are the main chloride channels in the luminal membrane of enterocytes. These transmembrane proteins play important roles in many physiological processes. In this study, we have identified a flavonoid quercetin as a modulator of CaCC chloride channel activity. Fluorescence quenching assay showed that quercetin activated Cl− transport in a dose-dependent manner, with EC50 ~37 μM. Short-circuit current analysis confirmed that quercetin activated CaCC-mediated Cl− currents in HT-29 cells that can be abolished by CaCCinh-A01. Ex vivo studies indicated that application of quercetin to mouse ileum and colon on serosal side resulted in activation of CFTR and CaCC-mediated Cl− currents. Notably, we found that quercetin exhibited inhibitory effect against ANO1 chloride channel activity in ANO1-expressing FRT cells and decreased mouse intestinal motility. Quercetin-stimulated short-circuit currents in mouse ileum was multi-component, which included elevation of Ca2+ concentration through L-type calcium channel and activation of basolateral NKCC, Na+/K+-ATPase, and K+ channels. In vivo studies further revealed that quercetin promoted fluid secretion in mouse ileum. The modulatory effect of quercetin on CaCC chloirde channels may therefore represent a potential therapeutic strategy for treating CaCC-related diseases like constipation, secretory diarrhea and hypertension. The inverse effects of quercetin on CaCCs provided evidence that ANO1 and intestinal epithelial CaCCs are different calcium-activated chloride channels. PMID:27932986

  12. Role of quercetin in modulating chloride transport in the intestine

    Directory of Open Access Journals (Sweden)

    Bo Yu

    2016-11-01

    Full Text Available Epithelial chloride channels provide the pathways for fluid secretion in the intestine. Cystic fibrosis transmembrane conductance regulator (CFTR and calcium-activated chloride channels (CaCCs are the main chloride channels in the luminal membrane of enterocytes. These transmembrane proteins play important roles in many physiological processes. In this study, we have identified a flavonoid quercetin as a modulator of CaCC chloride channel activity. Fluorescence quenching assay showed that quercetin activated Clˉ transport in a dose-dependent manner, with EC50 ~37 µM. Short-circuit current analysis confirmed that quercetin activated CaCC-mediated Clˉ currents in HT-29 cells that can be abolished by CaCCinh-A01. Ex-vivo studies indicated that application of quercetin to mouse ileum and colon on serosal side resulted in activation of CFTR and CaCC-mediated Clˉ currents. Notably, we found that quercetin exhibited inhibitory effect against ANO1 chloride channel activity in ANO1-expressing FRT cells and decreased mouse intestinal motility. Quercetin-stimulated short-circuit currents in mouse ileum was multi-component, which included elevation of Ca2+ concentration through L-type calcium channel and activation of basolateral NKCC, Na+/K+-ATPase and K+ channels. In vivo studies further revealed that quercetin promoted fluid secretion in mouse ileum. The modulatory effect of quercetin on CaCC chloirde channels may therefore represent a potential therapeutic strategy for treating CaCC-related diseases like constipation, secretory diarrhea and hypertension. The inverse effects of quercetin on CaCCs provided evidence that ANO1 and intestinal epithelial CaCCs are different calcium-activated chloride channels.

  13. Intrinsic Resistance of Burkholderia cepacia Complex to Benzalkonium Chloride

    Directory of Open Access Journals (Sweden)

    Youngbeom Ahn

    2016-11-01

    Full Text Available Pharmaceutical products that are contaminated with Burkholderia cepacia complex (BCC bacteria may pose serious consequences to vulnerable patients. Benzyldimethylalkylammonium chloride (BZK cationic surfactants are extensively used in medical applications and have been implicated in the coselection of antimicrobial resistance. The ability of BCC to degrade BZK, tetradecyldimethylbenzylammonium chloride (C14BDMA-Cl, dodecyldimethylbenzylammonium chloride (C12BDMA-Cl, decyldimethylbenzylammonium chloride (C10BDMA-Cl, hexyldimethylbenzylammonium chloride, and benzyltrimethylammonium chloride was determined by incubation in 1/10-diluted tryptic soy broth (TSB to determine if BCC bacteria have the ability to survive and inactivate these disinfectants. With BZK, C14BDMA-Cl, and C12BDMA-Cl, inhibition of the growth of 20 BCC strains was observed in disinfectant solutions that ranged from 64 to 256 µg/ml. The efflux pump inhibitor carbonyl cyanide m-chlorophenylhydrazone increased the sensitivity of bacteria to 64 µg/ml BZK. The 20 BCC strains grew well in 1/10-diluted TSB medium with BZK, C12BDMA-Cl, and C10BDMA-Cl; they absorbed and degraded the compounds in 7 days. Formation of benzyldimethylamine and benzylmethylamine as the initial metabolites suggested that the cleavage of the C alkyl-N bond occurred as the first step of BZK degradation by BCC bacteria. Proteomic data confirmed the observed efflux activity and metabolic inactivation via biodegradation in terms of BZK resistance of BCC bacteria, which suggests that the two main resistance mechanisms are intrinsic and widespread.

  14. Cluster Based Text Classification Model

    DEFF Research Database (Denmark)

    2011-01-01

    We propose a cluster based classification model for suspicious email detection and other text classification tasks. The text classification tasks comprise many training examples that require a complex classification model. Using clusters for classification makes the model simpler and increases th...... datasets. Our model also outperforms A Decision Cluster Classification (ADCC) and the Decision Cluster Forest Classification (DCFC) models on the Reuters-21578 dataset....

  15. FINDCLUS : Fuzzy INdividual Differences CLUStering

    NARCIS (Netherlands)

    Giordani, Paolo; Kiers, Henk A. L.

    ADditive CLUStering (ADCLUS) is a tool for overlapping clustering of two-way proximity matrices (objects x objects). In Simple Additive Fuzzy Clustering (SAFC), a variant of ADCLUS is introduced providing a fuzzy partition of the objects, that is the objects belong to the clusters with the so-called

  16. Subspace K-means clustering

    NARCIS (Netherlands)

    Timmerman, Marieke E.; Ceulemans, Eva; De Roover, Kim; Van Leeuwen, Karla

    2013-01-01

    To achieve an insightful clustering of multivariate data, we propose subspace K-means. Its central idea is to model the centroids and cluster residuals in reduced spaces, which allows for dealing with a wide range of cluster types and yields rich interpretations of the clusters. We review the existi

  17. Inhibitory effects of beryllium chloride on rat liver microsomal enzymes.

    Science.gov (United States)

    Teixeira, C F; Yasaka, W J; Silva, L F; Oshiro, T T; Oga, S

    1990-04-30

    A single i.v. dose (0.1 mmol Be2+/kg) of beryllium chloride prolonged the duration of pentobarbital-induced sleep and zoxazolamine-induced paralysis, in rats. The effects are correlated with changes of the pharmacokinetic parameters and with the in vitro inhibition of both aliphatic and aromatic hydroxylation of pentobarbital and zoxazolamine. In vitro N-demethylation of meperidine and aminopyrine was partially inhibited while O-demethylation of quinidine was unaffected by liver microsomes of rats pretreated with beryllium salt. The findings give clues that beryllium chloride inhibits some forms of cytochrome P-450, especially those responsible for hydroxylation of substrates, like pentobarbital and zoxazolamine.

  18. Controversy: Is Benzalkonium Chloride Necessary in Antiglaucoma Drops?

    Science.gov (United States)

    Louati, Y

    2012-01-01

    ABSTRACT Medical therapy is the first-line option in glaucoma management, with benzalkonium chloride (BAC) being the most frequently used preservative in antiglaucoma medications. Its use is however, known to be associated with deleterious effects on the ocular surface. This review is an attempt to critically evaluate whether BAC really is indispensable for better bioavailability of antiglaucoma drugs and consequently, better IOP control. How to cite this article: Louati Y, Shaarawy T. Controversy: Is Benzalkonium Chloride Necessary in Antiglaucoma Drops? J Current Glau Prac 2012;6(3):104-107. PMID:26997764

  19. Stochastic Models for Chloride-Initiated Corrosion in Reinforced Concrete

    DEFF Research Database (Denmark)

    Engelund, S.; Sørensen, John Dalsgaard

    1996-01-01

    Corrosion of the reinforcement in concrete structures can lead to a substantial decrease of the load-bearing capacity. One mode of corrosion initiation is when the chloride content around the reinforcement exceeds a threshold value. In the present paper a statistical model is developed by which...... the chloride content in a reinforced concrete structure can be predicted. The model parameters are estimated on the basis of measurements. The distribution of the time to initiation of corrosion is estimated by FORM/SORM-analysis....

  20. An experiment on multibubble sonoluminescence spectra in sodium chloride solution

    Institute of Scientific and Technical Information of China (English)

    CHEN Zhan; XU JunFeng; HUANG Wei; CHEN WeiZhong; MIAO GuoQing

    2008-01-01

    We investigated experimentally the spectra of MBSL in sodium chloride water solution with krypton as dissolved gas. We observed and compared the spectra of hydroxyl ion at 310 nm and that of sodium atom at 589 nm. It has been found that under the same experimental condition, the intensity of sodium atom spectra is obviously higher than that of the hydroxyl ion spectra, and is more sensitive to the experimental condition. The krypton content, the concentration of sodium chloride solution, and the driving sound pressure obviously affect the spectra intensity in certain range.

  1. Cluster Implantation and Deposition Apparatus

    DEFF Research Database (Denmark)

    Hanif, Muhammad; Popok, Vladimir

    2015-01-01

    In the current report, a design and capabilities of a cluster implantation and deposition apparatus (CIDA) involving two different cluster sources are described. The clusters produced from gas precursors (Ar, N etc.) by PuCluS-2 can be used to study cluster ion implantation in order to develop...... contributions to the theory of cluster stopping in matter as well as for practical applications requiring ultra-shallow implantation and modification of surfaces on the nanoscale. Metal clusters from the magnetron cluster source are of interest for the production of optical sensors to detect specific biological...

  2. Repassivation Potential of Alloy 22 in Sodium and Calcium Chloride Brines

    Energy Technology Data Exchange (ETDEWEB)

    Rebak, R B; Ilevbare, G O; Carranza, R M

    2007-08-11

    A comprehensive matrix of 60 tests was designed to explore the effect of calcium chloride vs. sodium chloride and the ratio R of nitrate concentration over chloride concentration on the repassivation potential of Alloy 22. Tests were conducted using the cyclic potentiodynamic polarization (CPP) technique at 75 C and at 90 C. Results show that at a ratio R of 0.18 and higher nitrate was able to inhibit the crevice corrosion in Alloy 22 induced by chloride. Current results fail to show in a consistent way a different effect on the repassivation potential of Alloy 22 for calcium chloride solutions than for sodium chloride solutions.

  3. Stellar populations in star clusters

    CERN Document Server

    Li, Chengyuan; Deng, Licai

    2016-01-01

    Stellar populations contain the most important information about star clus- ter formation and evolution. Until several decades ago, star clusters were believed to be ideal laboratories for studies of simple stellar populations (SSPs). However, discoveries of multiple stellar populations in Galactic globular clusters have expanded our view on stellar populations in star clusters. They have simultaneously generated a number of controversies, particularly as to whether young star clusters may have the same origin as old globular clusters. In addition, extensive studies have revealed that the SSP scenario does not seem to hold for some intermediate-age and young star clusters either, thus making the origin of multiple stellar populations in star clusters even more complicated. Stellar population anomalies in numerous star clusters are well-documented, implying that the notion of star clusters as true SSPs faces serious challenges. In this review, we focus on stellar populations in massive clusters with different ...

  4. Physical Properties of Nematic Decylammonium Chloride/ammonium Chloride/water Systems.

    Science.gov (United States)

    Stefanov, Michael Edwin

    This study reports new measurements of some physical properties (i.e., density and diamagnetic susceptibility) and also measurements on the curvature elasticity and flow properties of the amphiphilic nematic system of decylammonium chloride (DACl), ammonium chloride (NH(,4)Cl) and water. The mixtures exhibit a lamellar-smectic (neat soap) phase, a nematic lamellar (N(,L)) phase, and an isotropic micellar region. The densities were determined to an accuracy of 10('-4) by weighing an immersed calibrated bulb. The density does not show a discontinuous change at the nematic-isotropic transition and is estimated to be less than 0.01%. There is also only a small difference in the expansion coefficients between the nematic and isotropic regions. The diamagnetic susceptibilities were determined using the Gouy method with the error of the measurement on the order of 10('-4). The anisotropy in the diamagnetic susceptibility varies in the nematic range from 2 x 10(' -9) near T(,N(--->)I) to 5 x 10('-9) near T(,S(--->)N). The elasticity coefficients were measured by deforming a surface-aligned film by a magnetic field. An effective viscosity coefficient was calculated using the Leslie-Erickson hydrodynamic theory in the limit of small distortions. For the mixtures studied, the ratio of K(,11)/K(,33) is 0.9 near the N(--->)I transition. The ratio of (gamma)(,1)('*)/K(,33) varies from 7.74 x 10('6) s/cm('2) at 40.4(DEGREES)C to a maximum of 9.26 x 10('6) s/cm('2) at 33.5(DEGREES)C and then decreases to a value of 8.60 x 10('6) s/cm('2) at 30.0(DEGREES)C. Absolute values of K(,11), K(,33) and (gamma)(,1)('*) are derived by combining these results for (chi)(,a) with previously reported results for K(,11)/(chi)(,a), K(,33)/(chi)(,a), and (gamma)(,1)('*)/(chi)(,a). The absolute value of K(,11) varies from 1 x 10('-7) dynes at the N(--->)I transition to (TURN)5 x 10('-7) dynes at the neat soap-nematic transition. K(,33) varies accordingly from 2 x 10('-7) to the highest measured

  5. Nutritive value of timothy fertilized with chloride or chloride-containing liquid swine manure.

    Science.gov (United States)

    Pelletier, S; Tremblay, G F; Bélanger, G; Chantigny, M H; Seguin, P; Drapeau, R; Allard, G

    2008-02-01

    Chloride fertilization of timothy (Phleum pratense L.) decreases forage dietary cation-anion difference to an acceptable value [(fertilization might affect nutritive value. Two experiments were used to evaluate the effects of chloride fertilization on timothy spring growth and summer regrowth by determining concentrations of crude protein and neutral detergent fiber (NDF), in vitro true digestibility of DM (IVTD), and in vitro digestibility of NDF (dNDF). In an inorganic fertilization experiment, forages grown at 4 locations were fertilized with CaCl(2) (0, 80, 160, and 240 kg of Cl/ha per yr) or NH(4)Cl (160 kg of Cl/ha per yr) in combination with 2 N application rates (70 and 140 kg of N/ha per yr). The increase in Cl fertilization rate affected forage NDF concentration (+1.4%), IVTD (-0.8%), and dNDF (-1.2%) only at the highest rate of N fertilization, but this effect was not of biological importance. Crude protein concentration was not affected by Cl fertilization. Both Cl fertilizer types had a similar impact on forage nutritive value. In an organic fertilization experiment, forages grown at 2 locations received 1 of 7 experimental treatments [unfertilized control, inorganic fertilizer, raw liquid swine manure (LSM), and liquid fractions of 4 pretreated LSM types (decanted, filtered, anaerobically digested, and flocculated)] that provided, respectively, 0, 60, 41, 44, 44, 36, and 101 kg of Cl/ha per yr. The last 6 fertilizer treatments also provided 140 kg of N/ha per yr. The IVTD, dNDF, and concentration of NDF in timothy forage were not affected by the Cl content of the different LSM types. Nitrogen fertilization increased concentration of forage NDF and decreased IVTD and dNDF, but this effect was not biologically important. In both experiments, soil types and harvests had a negligible effect on forage nutritive value. Organic or inorganic Cl fertilizers applied to decrease timothy dietary cation-anion difference have little or no effect on forage nutritive

  6. SUBSTITUTION REACTION OF HYDROXY OF CITRONELLOL WITH CHLORIDE USING A MIXTURE OF AMMONIUM CHLORIDE AND SULPHURIC ACID

    Directory of Open Access Journals (Sweden)

    Endah Sayekti

    2016-08-01

    Full Text Available Substitution reaction of hydroxy of citronellol with chloride using a mixture of ammonium chloride (NH4Cl and sulphuric acid (H2SO4 has been conducted. The citronellol was obtained from the reduction of citronellal using sodium borohydride (NaBH4 at room temperature for 30 minutes. Substitution of hydroxy of citronellol with chloride ion was carried out at 80 oC and molarity ratio of citronellol and NH4Cl 1:1, 1:2; 1:3; and 1:4 respectively. Identification of the product by gas chromatography-mass spectrometry (GC-MS showed that the substitution reaction produced 2-isopropyl-5-methyl-1-chlorocyclohexane compound with rendemen 64,49 % in mol ratio of 1:4. The infra red (IR analysis showed that there was a vibration at wave number 763 cm-1 which is a typical C-Cl vibrations.

  7. Classification of aquifer vulnerability using K-means cluster analysis

    Science.gov (United States)

    Javadi, S.; Hashemy, S. M.; Mohammadi, K.; Howard, K. W. F.; Neshat, A.

    2017-06-01

    Groundwater is one of the main sources of drinking and agricultural water in arid and semi-arid regions but is becoming increasingly threatened by contamination. Vulnerability mapping has been used for many years as an effective tool for assessing the potential for aquifer pollution and the most common method of intrinsic vulnerability assessment is DRASTIC (Depth to water table, net Recharge, Aquifer media, Soil media, Topography, Impact of vadose zone and hydraulic Conductivity). An underlying problem with the DRASTIC approach relates to the subjectivity involved in selecting relative weightings for each of the DRASTIC factors and assigning rating values to ranges or media types within each factor. In this study, a clustering technique is introduced that removes some of the subjectivity associated with the indexing method. It creates a vulnerability map that does not rely on fixed weights and ratings and, thereby provides a more objective representation of the system's physical characteristics. This methodology was applied to an aquifer in Iran and compared with the standard DRASTIC approach using the water quality parameters nitrate, chloride and total dissolved solids (TDS) as surrogate indicators of aquifer vulnerability. The proposed method required only four of DRASTIC's seven factors - depth to groundwater, hydraulic conductivity, recharge value and the nature of the vadose zone, to produce a superior result. For nitrate, chloride, and TDS, respectively, the clustering approach delivered Pearson correlation coefficients that were 15, 22 and 5 percentage points higher than those obtained for the DRASTIC method.

  8. Clustering by Pattern Similarity

    Institute of Scientific and Technical Information of China (English)

    Hai-xun Wang; Jian Pei

    2008-01-01

    The task of clustering is to identify classes of similar objects among a set of objects. The definition of similarity varies from one clustering model to another. However, in most of these models the concept of similarity is often based on such metrics as Manhattan distance, Euclidean distance or other Lp distances. In other words, similar objects must have close values in at least a set of dimensions. In this paper, we explore a more general type of similarity. Under the pCluster model we proposed, two objects are similar if they exhibit a coherent pattern on a subset of dimensions. The new similarity concept models a wide range of applications. For instance, in DNA microarray analysis, the expression levels of two genes may rise and fall synchronously in response to a set of environmental stimuli. Although the magnitude of their expression levels may not be close, the patterns they exhibit can be very much alike. Discovery of such clusters of genes is essential in revealing significant connections in gene regulatory networks. E-commerce applications, such as collaborative filtering, can also benefit from the new model, because it is able to capture not only the closeness of values of certain leading indicators but also the closeness of (purchasing, browsing, etc.) patterns exhibited by the customers. In addition to the novel similarity model, this paper also introduces an effective and efficient algorithm to detect such clusters, and we perform tests on several real and synthetic data sets to show its performance.

  9. Chemical evolution of star clusters

    OpenAIRE

    van Loon, Jacco Th.

    2009-01-01

    I discuss the chemical evolution of star clusters, with emphasis on old globular clusters, in relation to their formation histories. Globular clusters clearly formed in a complex fashion, under markedly different conditions from any younger clusters presently known. Those special conditions must be linked to the early formation epoch of the Galaxy and must not have occurred since. While a link to the formation of globular clusters in dwarf galaxies has been suggested, present-day dwarf galaxi...

  10. Maximum-likelihood cluster recontruction

    CERN Document Server

    Bartelmann, M; Seitz, S; Schneider, P J; Bartelmann, Matthias; Narayan, Ramesh; Seitz, Stella; Schneider, Peter

    1996-01-01

    We present a novel method to recontruct the mass distribution of galaxy clusters from their gravitational lens effect on background galaxies. The method is based on a least-chisquare fit of the two-dimensional gravitational cluster potential. The method combines information from shear and magnification by the cluster lens and is designed to easily incorporate possible additional information. We describe the technique and demonstrate its feasibility with simulated data. Both the cluster morphology and the total cluster mass are well reproduced.

  11. Mercury toxicity in the shark (Squalus acanthias) rectal gland: apical CFTR chloride channels are inhibited by mercuric chloride.

    Science.gov (United States)

    Ratner, Martha A; Decker, Sarah E; Aller, Stephen G; Weber, Gerhard; Forrest, John N

    2006-03-01

    In the shark rectal gland, basolateral membrane proteins have been suggested as targets for mercury. To examine the membrane polarity of mercury toxicity, we performed experiments in three preparations: isolated perfused rectal glands, primary monolayer cultures of rectal gland epithelial cells, and Xenopus oocytes expressing the shark cystic fibrosis transmembrane conductance regulator (CFTR) chloride channel. In perfused rectal glands we observed: (1) a dose-dependent inhibition by mercury of forskolin/3-isobutyl-1-methylxanthine (IBMX)-stimulated chloride secretion; (2) inhibition was maximal when mercury was added before stimulation with forskolin/IBMX; (3) dithiothrietol (DTT) and glutathione (GSH) completely prevented inhibition of chloride secretion. Short-circuit current (Isc) measurements in monolayers of rectal gland epithelial cells were performed to examine the membrane polarity of this effect. Mercuric chloride inhibited Isc more potently when applied to the solution bathing the apical vs. the basolateral membrane (23 +/- 5% and 68 +/- 5% inhibition at 1 and 10 microM HgCl2 in the apical solution vs. 2 +/- 0.9% and 14 +/- 5% in the basolateral solution). This inhibition was prevented by pre-treatment with apical DTT or GSH; however, only the permeant reducing agent DTT reversed mercury inhibition when added after exposure. When the shark rectal gland CFTR channel was expressed in Xenopus oocytes and chloride conductance was measured by two-electrode voltage clamping, we found that 1 microM HgCl2 inhibited forskolin/IBMX conductance by 69.2 +/- 2.0%. We conclude that in the shark rectal gland, mercury inhibits chloride secretion by interacting with the apical membrane and that CFTR is the likely site of this action.

  12. [Evaluation of professional exposure to chloride vinyl monomer and vinyl idene chloride for a pharmaceutical packaging worker].

    Science.gov (United States)

    Dorsi, F; De Grandis, D; Laurelli, R; Narda, R; Pietrantonio, E; Scarlini, E; Soldati, P S

    2007-01-01

    The study was conducted by Judicial Policy investigations of Prosecution's Office. The event was connected by a professional founded suspicion disease of a pharmaceutical worker. First information coming from the Authority indicated a chloride vinyl monomer (CVM) exposure. We applied a chemical risk assessment method to estimate real professional exposure. The method was based on the productive cycle, physical and chemical and toxicological properties. The method combined to environmental data permitted to formulate etiological hypothesis. The worker during drugs packaging was exposed to CVM and vinylidene chloride (CVDM) caused by blister warming and by glue deposition. We explain the evaluations by which we could consider the pollutant different distribution in workplaces.

  13. Toxic effects of mercuric chloride, methylmercuric chloride, and Emisan 6 (an organic mercurial fungicide) on ovarian recrudescence in the catfish

    Energy Technology Data Exchange (ETDEWEB)

    Kirubagaran, R.; Joy, K.P.

    1988-12-01

    Mercurial toxicity in fishes has been focused mainly on tissue uptake and subcellular distribution, nephrotoxicity, development, hatching and survivability of young ones and teratology. Very few studies have been attempted to investigate Hg toxicity on gonadal activity of fishes throughout the breeding season. In a previous investigation the authors have studied the toxic effects of mercuric chloride (HgCl/sub 2/), methylmercuric chloride (CH/sub 3/HgCl) and emisan 6 (an alkoxyalkyl fungicide) on the survival and histology of the kidney of the catfish, Clarias batrachus. The present report deals with toxic effects of these mercurials on ovarian recrudescence in the catfish, an economically important species in the subcontinent.

  14. Clustering Game Behavior Data

    DEFF Research Database (Denmark)

    Bauckhage, C.; Drachen, Anders; Sifa, Rafet

    2015-01-01

    Recent years have seen a deluge of behavioral data from players hitting the game industry. Reasons for this data surge are many and include the introduction of new business models, technical innovations, the popularity of online games, and the increasing persistence of games. Irrespective...... of the causes, the proliferation of behavioral data poses the problem of how to derive insights therefrom. Behavioral data sets can be large, time-dependent and high-dimensional. Clustering offers a way to explore such data and to discover patterns that can reduce the overall complexity of the data. Clustering...... and other techniques for player profiling and play style analysis have, therefore, become popular in the nascent field of game analytics. However, the proper use of clustering techniques requires expertise and an understanding of games is essential to evaluate results. With this paper, we address game data...

  15. Exotic cluster structures on

    CERN Document Server

    Gekhtman, M; Vainshtein, A

    2017-01-01

    This is the second paper in the series of papers dedicated to the study of natural cluster structures in the rings of regular functions on simple complex Lie groups and Poisson-Lie structures compatible with these cluster structures. According to our main conjecture, each class in the Belavin-Drinfeld classification of Poisson-Lie structures on \\mathcal{G} corresponds to a cluster structure in \\mathcal{O}(\\mathcal{G}). The authors have shown before that this conjecture holds for any \\mathcal{G} in the case of the standard Poisson-Lie structure and for all Belavin-Drinfeld classes in SL_n, n<5. In this paper the authors establish it for the Cremmer-Gervais Poisson-Lie structure on SL_n, which is the least similar to the standard one.

  16. The Effect of Silver Chloride Formation on the Kinetics of Silver Dissolution in Chloride Solution

    Science.gov (United States)

    Ha, Hung; Payer, Joe

    2011-01-01

    The precipitation and growth of AgCl on silver in physiological NaCl solution were investigated. AgCl was found to form at bottom of scratches on the surface which may be the less effective sites for diffusion or the favorable sites for heterogeneous nucleation. Patches of silver chloride expanded laterally on the substrate until a continuous film formed. The ionic transport path through this newly formed continuous film was via spaces between AgCl patches. As the film grew, the spaces between AgCl patches closed and ion transport was primarily via micro-channels running through AgCl patches. The decrease of AgCl layer conductivity during film growth were attributed to the clogging of micro-channels or decrease in charge carrier concentration inside the micro-channels. Under thin AgCl layer, i.e. on the order of a micrometer, the dissolution of silver substrate was under mixed activation-Ohmic control. Under thick AgCl layer, i.e. on the order of tens of micrometers, the dissolution of silver substrate was mediated by the Ohmic resistance of AgCl layer. PMID:21516171

  17. The Effect of Silver Chloride Formation on the Kinetics of Silver Dissolution in Chloride Solution.

    Science.gov (United States)

    Ha, Hung; Payer, Joe

    2011-02-28

    The precipitation and growth of AgCl on silver in physiological NaCl solution were investigated. AgCl was found to form at bottom of scratches on the surface which may be the less effective sites for diffusion or the favorable sites for heterogeneous nucleation. Patches of silver chloride expanded laterally on the substrate until a continuous film formed. The ionic transport path through this newly formed continuous film was via spaces between AgCl patches. As the film grew, the spaces between AgCl patches closed and ion transport was primarily via micro-channels running through AgCl patches. The decrease of AgCl layer conductivity during film growth were attributed to the clogging of micro-channels or decrease in charge carrier concentration inside the micro-channels. Under thin AgCl layer, i.e. on the order of a micrometer, the dissolution of silver substrate was under mixed activation-Ohmic control. Under thick AgCl layer, i.e. on the order of tens of micrometers, the dissolution of silver substrate was mediated by the Ohmic resistance of AgCl layer.

  18. Kinematics of Clustering

    CERN Document Server

    Wang, Steven; Metcalfe, Guy; Wu, Jie

    2014-01-01

    The dynamical system for inertial particles in fluid flow has both attracting and repelling regions, the interplay of which can localize particles. In laminar flow experiments we find that particles, initially moving throughout the fluid domain, can undergo an instability and cluster into subdomains of the fluid when the flow Reynolds number exceeds a critical value that depends on particle and fluid inertia. We derive an expression for the instability boundary and for a universal curve that describes the clustering rate for all particles.

  19. Clustering via Kernel Decomposition

    DEFF Research Database (Denmark)

    Have, Anna Szynkowiak; Girolami, Mark A.; Larsen, Jan

    2006-01-01

    Methods for spectral clustering have been proposed recently which rely on the eigenvalue decomposition of an affinity matrix. In this work it is proposed that the affinity matrix is created based on the elements of a non-parametric density estimator. This matrix is then decomposed to obtain...... posterior probabilities of class membership using an appropriate form of nonnegative matrix factorization. The troublesome selection of hyperparameters such as kernel width and number of clusters can be obtained using standard cross-validation methods as is demonstrated on a number of diverse data sets....

  20. South Asian Cluster

    Directory of Open Access Journals (Sweden)

    Ionel Sergiu Pirju

    2014-12-01

    Full Text Available This article aims at presenting the South Asian cluster composed of India, Indonesia, Iran and Malaysia, the intercultural values that characterizes it, the supported leadership style and tracing the main macroeconomic considerations which characterizes them. The research is synchronic, analysing the contemporary situation of these countries without reference to their evolution in time, by using the positivist paradigm that explains the reality at one point. It will be analysed the overall cluster with the existing interactions between the countries that composes it, while the article being one of information will avoid building recommendation, or new theories.