WorldWideScience

Sample records for cultivar-by-cutting height interactions

  1. Bioactive compounds from flesh and by-product of fresh-cut watermelon cultivars.

    Science.gov (United States)

    Tarazona-Díaz, Martha Patricia; Viegas, Joana; Moldao-Martins, Margarida; Aguayo, Encarna

    2011-03-30

    The fresh-cut industry produces thousands of tons of waste in non-edible portions that present an environmental and management problem. These by-products could be reused, in particular, to obtain bioactive compounds. In this study, five different fresh-cut watermelon cultivars were assessed for their flesh and by-product bioactive contents. The amount of by-product varied between 31.27 and 40.61% of initial fresh weight (f.w.) depending on the cultivar. Watermelon cultivars were poor sources of total antioxidant, and the content was similar between rind and flesh samples (46.96 vs 43.46 mg ascorbic acid equivalent antioxidant capacity kg(-1) f.w.). However, the rind had a moderate total phenolic content higher than that of the flesh (458 vs 389 mg chlorogenic acid equivalent kg(-1) f.w.) and a much higher content of the amino acid citrulline (3.34 vs 2.33 g kg(-1) f.w.), which has potential bioactive properties. Watermelon rind offers quantitative interest as a natural source of citrulline, particularly Fashion, a dark-skinned, seedless cultivar. More research is required on the efficient extraction of citrulline from watermelon rind and its suitability as an additive to drinks, juices or others products to produce new functional food products with valid health claims. Copyright © 2010 Society of Chemical Industry.

  2. CHEMICAL COMPOSITION AND NUTRITIVE VALUE OF MAIZE STEMS DEPENDING ON THE CUTTING HEIGHT OF PLANTS AT HARVEST

    Directory of Open Access Journals (Sweden)

    Ireneus KOWALIK

    2013-12-01

    Full Text Available Studies were carried out in the two years in Trzcianka near Nowy Tomyśl, on brown soil, IIIa – IVa with pH 7.1 – 7.2. Plants of five maize cultivars were cut at the height of 15 cm and 55 cm. The lower parts of stems with leaves which remain on the field in case of high cutting, were characterized by a smaller content of protein and by a greater content of fibre, in comparison with the higher parts of plants. The energetic value of 1 kg of dry matter of the lower 40 cm part with leaves expressed in MJ NEL, in spite of significant differences in the chemical composition, was only insignificantly lower than the upper part. The content of dry matter, the chemical composition and the energetic value of both parts differed, depending on the cultivar.

  3. Variation between cut chrysanthemum cultivars in response to suboptimal temperature

    NARCIS (Netherlands)

    Ploeg, van der A.; Kularathne, R.J.K.N.; Carvalho, S.M.P.; Heuvelink, E.

    2007-01-01

    To breed for more energy-efficient cut chrysanthemum (Chrysanthemum morifolium Ramat.) cultivars it is important to know the variation of the temperature response existing in modern cultivars. In a greenhouse experiment with 25 chrysanthemum cultivars, a significant variation was observed in

  4. Responses of fresh-cut products of four mango cultivars under two different storage conditions.

    Science.gov (United States)

    Sharma, Sonu; Rao, Tadapaneni Venkata Ramana

    2017-05-01

    Due to availability of minimally processed products, the consumption of fresh produce has increased over recent years. The present study has been undertaken with the objective of screening of four mango cultivars ('Kesar', 'Rajapuri', 'Totapuri' and 'Ladvo') for evaluating the consequences of minimal processing on their quality attributes under storage at two different temperatures (5 ± 1 °C, 95% RH and 10 ± 1 °C, 87% RH) up to 12 days. The result of the study revealed significant impacts of low temperature storage on the quality parameters of fresh-cut mango cultivars. The evaluated bioactive compounds such as total phenolics, vitamin C and carotenoids were better retained in the samples stored at 5 °C as compared with that of 10 °C. Moreover, the storage of fresh-cut mango cultivars at 5 °C showed lower water loss and microbial contamination. Sensory analyses revealed that the storage of fresh-cut mango cultivars at 10 °C influenced overall acceptability due to changes in their visual perception, though taste, odor and firmness were less affected. This study revealed a significant variation in the storability of fresh-cut mango cultivars with respect to the storage temperature. Among currently studied four cultivars of mango, slices of 'Totapuri' showed comparatively the least change in color, firmness and sensory properties during storage at 5 and 10 °C and it can be a potential cultivar for fresh-cut processing.

  5. Morphological composition of cultivar of Urochloa brizantha under light intensities

    Directory of Open Access Journals (Sweden)

    Erikelly Aline Ribeiro de Santana

    2013-12-01

    Full Text Available The implementation of silvopastoral systems (SSP is a management option that gives good results for animal production, but the shading of the trees can alter production, growth behavior and morphological composition of the forage. The aim of the study was to evaluate the morphological composition of Urochloa brizantha cultivars Marandu and Piatã under natural light and artificial shading of 30 and 60%. The experiment was conducted at FMVZ - UNESP, Botucatu. The experimental design was a randomized block in factorial arrangement 3 x 2 (three shading levels: 0, 30 and 60% and two cultivars: Marandu and Piatã with three replications and repeated measures in time (3 cuts. Sample collection occurred when the cultivars reached in 35 cm of height. Significant effects (P<0.05 of cultivar x shade x cut interaction were observed on the dry matter production of leaves and stems (Table 1. The higher production of leaves and stems (P<0.05 occurred for Piatã under natural light in the third cut (3731 and 1920 kg/ha, respectively. The absence of shade favored greater leaf production, 35 and 27% higher than the reductions of 30 and 60% respectively. The increment of stems for Piatã under natural light is related to the increase of inflorescences. The leaf:stem ratio was higher (P< 0.05 for Marandu under natural light (Table 2, with effect from the interaction cultivar x brightness level. A significant effect (P<0.05 cultivar x level of light reduction for light interception parameter was detected (Table 2. For Marandu, light levels were not influenced (P<0.05 light traps (Table 2, being close to the 95% criterion used for pasture management, justified by the collection at the point of balance between forage productivity and nutritional content, and strong relationship with high input grazing. The results indicate that the morphological composition of the cultivars is modified by reducing the light intensity.

  6. Effect of cutting height and frequency on Leucaena leucocephala ...

    African Journals Online (AJOL)

    Leucaena leucocephala is a fast-growing tree that can provide both high quality forage and firewood. The objective of this trial was to determine the optimum height and frequency of cutting for both wood and forage production. Cutting heights at 0.3m, 0.6m and 1.0 m were superimposed on 3-month and 6-month cutting ...

  7. Potencial de propagação de cultivares de marmeleiro por estaquia Potencial of propagation of cultivars of quince for cuttings

    Directory of Open Access Journals (Sweden)

    Rafael Pio

    2004-08-01

    Full Text Available Devido à escassez de trabalhos com o enraizamento de estacas de marmeleiro, realizou-se o presente trabalho com o objetivo de verificar o potencial de enraizamento de estacas de cultivares de marmeleiro. Utilizaram-se estacas lenhosas e lisas coletadas de plantas de marmeleiro 'Radiolo', 'Mendoza Inta-37', 'Much Prolife', 'Pineapple', 'Smyrna', 'De Patras', 'Provencia', 'Van Deman', 'Provance', 'Meliforme', 'Portugal' (Cydonia oblonga e 'Japonês' (Chaenomelis sinensis L., sendo estas padronizadas com 20 cm de comprimento. As estacas foram enterradas até a metade do comprimento em canteiro de terra e coberto por tela sombrite 50%, sendo umedecidas diariamente através de regas manuais. Após 75 dias, coletaram-se os seguintes dados biométricos: porcentagem de estacas enraizadas e brotadas, número de folhas e brotos, comprimento da maior raiz, comprimento médio das brotações e número de raízes emitidas por estaca. As cultivares Pineapple, De Patras, Provencia e Mendoza Inta-37 apresentaram maior potencialidade de propagação via estaquia.Due to the shortage of works with the quince cutting, the present work was developed with the objective to verify the rooting potential of quince cultivars cutting. Hardwoody cuttings of quince were collected from 'Radiolo', 'Mendoza Inta-37', 'Much Prolife', 'Pineapple', 'Smyrna', 'De Patras', 'Provencia', 'Van Deman', 'Provance', 'Meliforme', 'Portugal' (Cydonia oblonga and 'Japonês' (Chaenomelis sinensis L., being these samples standardized with 20 cm of length. Soon after, half of the length of the cutting was put in a substrate constituted by soil and covered by sombrite 50%, being daily humidified by water. After 75 days, were evaluated the percentage of rooting and sprouting, number of leaves and sprouts, length of the largest root and sprouting and number of roots emitted by cutting. The cultivars Pineapple, De Patras, Provencia and Mendoza Inta-37 presented larger potentiality of propagation

  8. INTERRELATION BETWEEN TYPE AND CULTIVAR OF BERRY-LIKE CROP AND CUTTINGS CRYOPRESERVATION RESULTS

    Directory of Open Access Journals (Sweden)

    L. V. Gorbunov

    2013-04-01

    Full Text Available Optimal cryopreservation parameters were determined for the berry-like crop cuttings: blackcurrant (Dachnica, Yuviley, Sofiivska, Kitayskaya; redcurrant (Kitaivska, Djoker, Svyatkova; gooseberries (Krasen, Malachite, Kolobok; raspberries (Novost’ Kuz’mina, Struyka, Skromnica. This procedure allowed increasing viability of deconservation samples in 2–5 times compared to the existing methods of cryopreservation. Maximal values of cutting viability were obtained after their temperature adaptation at –10 °C during 14–60 days, stepwise cooling of the samples with 0.1–0.5 °C/hr rate down to –30 °C (exposure 3–7 days, direct plunging into liquid nitrogen, storage from 1 to 30 days and thawing rate of 70 °C/min. It was found that the in the region of allowable values for maximum viability of investigated birch (control cuttings humidity values correspond 32±40%, for blackcurrant are 40±50%, and raspberries 37±40 % in affirmative temperature span and 14±28 %, 30±40 %, 20±23 % in below zero. Using dispersion analysis it has been established that the development probability of frozenthawed plant cuttings significantly depends on the selected cultivar and cryopreservation method. It is noted that the force of influence η2А, due to the individual properties of the studied cultivars of berries, is comparable to that of the force of influence η2В of cryopreservation procedures. The differences of average indexes of viability of the studied cultivars were showed within a single species. It was found that these rates are different for black currant by 92%, redcurrant — 54%, gooseberries — 48%, raspberries — 70%. Using paired Student’s t-test has reduced to 3 times the error of representativeness of the sample that enabled to improve the reliability of the significance of differences compared to the values of the P ≥0,99. Selection of the cuttings’ cultivars and cryopreservation method significantly affect the

  9. Extraction of Trees Stem Diameters at Breast Height by Terrestrial Laser Sensor for Selective Cutting

    Directory of Open Access Journals (Sweden)

    Yili ZHENG

    2014-02-01

    Full Text Available In order to assist the operators of the logging harvester automatically and quickly select the appropriate trees for selective cutting, using two-dimensional laser scanner and inertial measurement system, the two-dimensional cloud points of the trunks at breast-height are obtained for several trees. After projection, clustering, linear transformation and fitting for the point clouds data, the parameters of the breast-height-diameters and center locations of the trees are obtained. The calculation is implemented in MATLAB by Polak-Ribiere-Polyak (PRP conjugate gradient algorithm and the result is shown in VC++ environment. Using this method, absolute errors of the breast-height- diameters and center locations are 2.3 cm and (12.4, 11.4 cm respectively, and meet the requirements on the automatically selective cutting of the logging harvester.

  10. Net herbage accumulation rate and crude protein content of Urochloa brizantha cultivars under shade intensities

    Directory of Open Access Journals (Sweden)

    Paulo Roberto de Lima Meirelles

    2013-12-01

    Full Text Available The use of silvopastoral systems is a sustainable alternative for animal production in various regions of the Brazil. However to obtain satisfactory results in these systems, the selection of forage species that grows well in the shade should be done. The tolerance of plants to light restriction and the correctly choice of species, considering good nutritional values for these conditions has great importance. The study of artificial shading for forage production helps the clarification of issues related to the behavior of plants under reduced light prior to use in integrations with forests. The aim of the study was to evaluate the net herbage accumulation rate of forage (HAR and crude protein (CP of Urochloa brizantha cultivars (Marandu and Piatã under natural light and shading of 30 and 60%. The experiment was conducted at FMVZ - UNESP, Botucatu. The experimental design was a randomized block in factorial arrangement 3 x 2 (three shading levels: 0, 30 and 60%, two cultivars: Marandu and Piatã with three replications and repeated measures (3 cuts. Sample collection occurred when the cultivars reached 35 cm in height. The treatments with shading showed lower cutting intervals as compared to those subjected to full sunlight, because they have reached in a shorter time to time as determined cut-off criterion (mean of 37, 45 and 61 days for reduction of 60%, reduction of 30% and full sun. Significant effects (P<0.05 interaction cultivar x shade x cut on the net herbage accumulation rate (HAR. Most HAR (P<0.05 was observed for cv. Marandu 60% reduction in lightness (127 kg/ha/day due to increased production of stem during the first growing cycle. The lower HAR also occurred to Marandu, but under natural light in the third cut (34 kg/ha/day due to adverse weather conditions during the growth interval. The shadow effect and the cutting (P<0.05 affected CP. The percentage of CP on cultivars showed the highest values (average value of 9.27% in 60

  11. Enhanced Conjugation of Auxin by GH3 Enzymes Leads to Poor Adventitious Rooting in Carnation Stem Cuttings.

    Science.gov (United States)

    Cano, Antonio; Sánchez-García, Ana Belén; Albacete, Alfonso; González-Bayón, Rebeca; Justamante, María Salud; Ibáñez, Sergio; Acosta, Manuel; Pérez-Pérez, José Manuel

    2018-01-01

    Commercial carnation ( Dianthus caryophyllus ) cultivars are vegetatively propagated from axillary stem cuttings through adventitious rooting; a process which is affected by complex interactions between nutrient and hormone levels and is strongly genotype-dependent. To deepen our understanding of the regulatory events controlling this process, we performed a comparative study of adventitious root (AR) formation in two carnation cultivars with contrasting rooting performance, "2101-02 MFR" and "2003 R 8", as well as in the reference cultivar "Master". We provided molecular evidence that localized auxin response in the stem cutting base was required for efficient adventitious rooting in this species, which was dynamically established by polar auxin transport from the leaves. In turn, the bad-rooting behavior of the "2003 R 8" cultivar was correlated with enhanced synthesis of indole-3-acetic acid conjugated to aspartic acid by GH3 proteins in the stem cutting base. Treatment of stem cuttings with a competitive inhibitor of GH3 enzyme activity significantly improved rooting of "2003 R 8". Our results allowed us to propose a working model where endogenous auxin homeostasis regulated by GH3 proteins accounts for the cultivar dependency of AR formation in carnation stem cuttings.

  12. ENRAIZAMENTO DE ESTACAS LENHOSAS DE CULTIVARES DE MARMELEIRO (Cydonia oblonga TRATADAS COM FLOROGLUCINOL ROOTING HARDWOODY CUTTINGS OF QUINCE (Cydonia oblonga CULTIVARS TREATED WITH FLOROGLUCINOL

    Directory of Open Access Journals (Sweden)

    LEO RUFATO

    2001-12-01

    Full Text Available O marmeleiro pertence à família Rosaceae. Atualmente, tem sido utilizado como porta-enxerto de pereira devido sua característica ananizante. O floroglucinol é um composto fenólico, potencializador da auxina. O presente trabalho foi conduzido em telado com nebulização intermitente e teve como objetivo avaliar a capacidade de enraizamento de estacas lenhosas de marmeleiro, tratadas com floroglucinol (zero, 1500 e 3000 mg.L-1, para indução de raízes. As cultivares testadas foram Pineapple, Meliform, Alongado, Radaelli, Portugal, Inta e MC. As estacas foram preparadas com 12 cm e ½ folha na parte superior, acondicionadas em caixas plásticas contendo vermiculita média. O delineamento utilizado foi o de blocos ao acaso, em arranjo fatorial (3 x 7, com 3 repetições e 5 estacas por parcela. As variáveis analisadas foram percentagem de enraizamento, número de raízes e percentagem de estacas brotadas. Observou-se que, independentemente da concentração testada, o floroglucinol não promoveu a indução do enraizamento de estacas lenhosas. A cultivar MC apresentou melhor percentagem de enraizamento, número de raízes e percentagem de estacas brotadas.The quince belongs from the family Rosaceae. Now, it has been used as rootstock tree door-graft because it induce dwarf plants. The floroglucinol is a phenolic compost, which effects is by increased the auxine and that tends to induce and to increase hardwoody cuttings. The present work was carried out in a greenhouse with intermittent mist writh the objective to determine the best quince cultivars in relation to its capacity of rooting hardwoody cuttings, and the best floroglucinol concentration for the root induction. The cultivars Pineapple, Meliform, Prolonged, Radaelli, Portugal, Inta and MC were used. They were submitted to three treatments of different floroglucinol concentrations (zero, 1500 and 3000 mg.L-1. The cuttings with 12 cm and ½ leaf in the superior part were conditioned

  13. Enhanced Conjugation of Auxin by GH3 Enzymes Leads to Poor Adventitious Rooting in Carnation Stem Cuttings

    Directory of Open Access Journals (Sweden)

    Antonio Cano

    2018-04-01

    Full Text Available Commercial carnation (Dianthus caryophyllus cultivars are vegetatively propagated from axillary stem cuttings through adventitious rooting; a process which is affected by complex interactions between nutrient and hormone levels and is strongly genotype-dependent. To deepen our understanding of the regulatory events controlling this process, we performed a comparative study of adventitious root (AR formation in two carnation cultivars with contrasting rooting performance, “2101–02 MFR” and “2003 R 8”, as well as in the reference cultivar “Master”. We provided molecular evidence that localized auxin response in the stem cutting base was required for efficient adventitious rooting in this species, which was dynamically established by polar auxin transport from the leaves. In turn, the bad-rooting behavior of the “2003 R 8” cultivar was correlated with enhanced synthesis of indole-3-acetic acid conjugated to aspartic acid by GH3 proteins in the stem cutting base. Treatment of stem cuttings with a competitive inhibitor of GH3 enzyme activity significantly improved rooting of “2003 R 8”. Our results allowed us to propose a working model where endogenous auxin homeostasis regulated by GH3 proteins accounts for the cultivar dependency of AR formation in carnation stem cuttings.

  14. Azimuth cut-off model for significant wave height investigation along coastal water of Kuala Terengganu, Malaysia

    Science.gov (United States)

    Marghany, Maged; Ibrahim, Zelina; Van Genderen, Johan

    2002-11-01

    The present work is used to operationalize the azimuth cut-off concept in the study of significant wave height. Three ERS-1 images have been used along the coastal waters of Terengganu, Malaysia. The quasi-linear transform was applied to map the SAR wave spectra into real ocean wave spectra. The azimuth cut-off was then used to model the significant wave height. The results show that azimuth cut-off varied with the different period of the ERS-1 images. This is because of the fact that the azimuth cut-off is a function of wind speed and significant wave height. It is of interest to find that the significant wave height modeled from azimuth cut-off is in good relation with ground wave conditions. It can be concluded that ERS-1 can be used as a monitoring tool in detecting the significant wave height variation. The azimuth cut-off can be used to model the significant wave height. This means that the quasi-linear transform could be a good application to significant wave height variation during different seasons.

  15. Efeito da altura de corte das plantas na produtividade de matéria seca e em características bromatológicas da forragem de milho Effect of cutting height of plants on dry matter yield and on bromatologic characteristics of corn forage

    Directory of Open Access Journals (Sweden)

    Ramon Correia de Vasconcelos

    2005-12-01

    Full Text Available Este trabalho foi conduzido com o objetivo de avaliar a produção de matéria seca e a composição bromatológica da forragem de cultivares de milho submetidos a duas alturas de corte das plantas (altura 1 - 0,1 m e altura 2 - 0,8 m em três anos de cultivo no município de Lavras, MG. Os experimentos foram instalados em área experimental do Departamento de Agricultura da Universidade Federal de Lavras (UFLA nas safras agrícolas 1998/1999, 1999/2000 e 2000/2001, empregando-se cinco cultivares de milho no primeiro ano e seis nos anos seguintes. Os experimentos foram conduzidos sob o delineamento de blocos casualizados em esquema fatorial 5 x 2 e 6 x 2, sendo cinco ou seis cultivares de milho e duas alturas de corte, com três repetições. Avaliaram-se as características produtividade de matéria seca (MS e teores de proteína bruta (PB, fibra em detergente neutro (FDN e fibra em detergente ácido (FDA na MS. Detectou-se efeito significativo das alturas de corte em todas as características estudadas. Os teores de PB aumentaram e os de FDN e FDA diminuíram com a elevação da altura de corte das plantas. Comparando-se as duas alturas de corte, verificou-se que houve uma redução de 3,3 t.ha-1 na produtividade de MS, um aumento de 0,6% no teor de PB, uma redução de 4,4% no teor de FDN e uma redução de 3,9% no teor de FDA com a elevação da altura de corte de 0,1 para 0,8 m. Os resultados obtidos permitiram concluir que a elevação da altura de corte, embora tenha contribuído para a diminuição da produção de MS, proporcionou uma melhoria na qualidade da forragem em decorrência da parte mais fibrosa e menos digestível da planta de milho não ter sido colhida.This work was conducted with the purpose of evaluating dry matter yield and the chemical nutritive composition of forage of corn cultivars submitted to cutting heights of the plants (height 1 0,1 m, and height 2 0,8 m in three growing years. The experiments were set up in an

  16. Effect of Various Management Methods of Apical Flower Bud on Cut Flower Quality in Three Cultivars of Greenhouse Roses

    Directory of Open Access Journals (Sweden)

    mansour matloobi

    2017-02-01

    Full Text Available Introduction: In greenhouse roses, canopy management has been highly noted and emphasized during the past decades. It was recognized that improving canopy shape by implementing some techniques such as stem bending and flower bud removing can highly affect the marketable quality of cut roses. For most growers, the best method of flower bud treatment has not yet been described and determined physiologically. This experiment was designed to answer some questions related to this problem. Materials and Methods: A plastic commercial cut rose greenhouse was selected to carry out the trial. Three greenhouse rose cultivars, namely Eros, Cherry Brandy and Dancing Queen, were selected as the first factor, and three methods of flower bud treatment along with bending types were chosen as the second factor. Cuttings were taken from mother plants and rooted under mist conditions. The first shoot emerging from the cutting was treated at pea bud stage by one of the following methods: shoot bending at stem base with intact bud, immediate shoot bending at stem base after removing flower bud and shoot bending at stem base two weeks after flower bud removal. Some marketable stem properties including stem length, diameter and weight, and characteristics related to bud growth potential were measured, and then the data were subjected to statistical analysis. Results and Discussion: Analysis of variance showed that cultivars differ in their marketable features. Cherry Brandy produced longer cut flowers with higher stem diameter compared to the two other cultivars. This cultivar was also good in stem weight trait; however its difference from Eros was not significant. Dancing Queen did not perform well in producing high quality stems on the whole. Regarding number of days until bud release and growth, Cherry Brandy’s buds spent fewest days until growing. In many studies, the effect of cultivar on rose shoot growth quality has been documented and explained. For instance

  17. Effect of Various Management Methods of Apical Flower Bud on Cut Flower Quality in Three Cultivars of Greenhouse Roses

    Directory of Open Access Journals (Sweden)

    mansour matloobi

    2017-09-01

    Full Text Available Introduction: In greenhouse roses, canopy management has been highly noted and emphasized during the past decades. It was recognized that improving canopy shape by implementing some techniques such as stem bending and flower bud removing can highly affect the marketable quality of cut roses. For most growers, the best method of flower bud treatment has not yet been described and determined physiologically. This experiment was designed to answer some questions related to this problem. Materials and Methods: A plastic commercial cut rose greenhouse was selected to carry out the trial. Three greenhouse rose cultivars, namely Eros, Cherry Brandy and Dancing Queen, were selected as the first factor, and three methods of flower bud treatment along with bending types were chosen as the second factor. Cuttings were taken from mother plants and rooted under mist conditions. The first shoot emerging from the cutting was treated at pea bud stage by one of the following methods: shoot bending at stem base with intact bud, immediate shoot bending at stem base after removing flower bud and shoot bending at stem base two weeks after flower bud removal. Some marketable stem properties including stem length, diameter and weight, and characteristics related to bud growth potential were measured, and then the data were subjected to statistical analysis. Results and Discussion: Analysis of variance showed that cultivars differ in their marketable features. Cherry Brandy produced longer cut flowers with higher stem diameter compared to the two other cultivars. This cultivar was also good in stem weight trait; however its difference from Eros was not significant. Dancing Queen did not perform well in producing high quality stems on the whole. Regarding number of days until bud release and growth, Cherry Brandy’s buds spent fewest days until growing. In many studies, the effect of cultivar on rose shoot growth quality has been documented and explained. For instance

  18. Forage growth, yield and quality responses of Napier hybrid grass cultivars to three cutting intervals in the Himalayan foothills

    Directory of Open Access Journals (Sweden)

    Kesang Wangchuk

    2015-09-01

    Full Text Available A 3 x 3 factorial study was conducted in the southern foothills of Bhutan to compare 3 cultivars of Napier hybrid grass (Pennisetum purpureum x P. glaucum: Pakchong-1, CO-3 and Giant Napier, at 3 cutting intervals (40, 60 and 80 days, in terms of forage growth, dry matter (DM yield and crude protein (CP concentration. The effects of cultivar x cutting interval were significant only on tiller number per plant and leaf:stem ratio (LSR. CO-3 consistently produced the highest tiller number per plant, leaves per plant and LSR, while Pakchong-1 produced the lowest. Pakchong-1 plants were taller, had bigger tillers and basal circumference and higher stem DM production than CO-3 and Giant. Leaf CP for all cultivars was about 17%, while stem CP concentration was lower for Pakchong-1 than for the other cultivars (3.6 vs. 5.3%, P<0.05. While 40-day cutting intervals produced high quality forage, yields suffered marked-ly and the best compromise between yield and quality of forage seemed to occur with 60-day cutting intervals. Pakchong-1 seems to have no marked advantages over CO-3 and Giant for livestock feed, and feeding studies would verify this. Its higher stem DM yields may be advantageous for biogas production and this aspect should be investigated.Keywords: Bhutan, CO-3, crude protein , dry matter, Giant Napier, Pakchong-1.DOI: 10.17138/TGFT(3142-150

  19. Enraizamento de estacas de duas cultivares de oliveira submetidas à aplicação de diferentes fertilizantes Rooting of cuttings from two olive cultivars using different fertilizers

    Directory of Open Access Journals (Sweden)

    Marcelo Caetano de Oliveira

    2010-01-01

    Full Text Available Estacas semilenhosas com aproximadamente 12 cm de comprimento e quatro folhas coletadas na região mediana da copa em plantas de oliveira das cultivares Ascolano 315 e Arbequina, foram preparadas, e em seguida tratadas com 3000 mg L-1 de AIB por cinco segundos. O ensaio foi realizado em estufa, com sistema de nebulização intermitente, sendo as estacas colocadas em bandejas, contendo a perlite como substrato de enraizamento. Utilizando-se delineamento inteiramente casualizado, em esquema fatorial 2 x 7, com quatro repetições, avaliaram-se as duas cultivares de oliveira e seis fertilizantes (Biofertilizante, Nippoterra, Fert Bokashi e Ativo, na proporção de 25 mL L-1 e Nutricafé e Rocksil, na proporção de 25 g L-1, além do controle sem fertilizante. Os produtos foram aplicados nas parcelas experimentais antes da estaquia, com regador manual, em dosagem única. Passados 67 dias, foi avaliada a percentagem de estacas com calo e enraizadas e o número e comprimento médio das raízes. Concluiu-se que o Biofertilizante propiciou melhores resultados, em comparação aos demais fertilizantes e que a cultivar Ascolano 315 foi a que teve melhores taxas de enraizamento.Semi hardwood cutting colleted in the medium portion of the Ascolano 315 and Arbequina olive cultivars were prepared with 12 cm of length and four leaves, and treated with of IBA (3,000 mg L-1 by five seconds. The experiment was carried out in a greenhouse equipped with a mist nebulization system. Using a randomized experimental design in factorial scheme, in 4 replication, were tested the two cultivars and six fertilizers (Biofertilizante, Nippoterra, Fert Bokashi, Ativo, in the proportion of 25 mL L-1, Nutricafé and Rocksil, in the proportion of 25 g L-1 plus a control without fertilization. The products were applied in the trays contends perlite as substrate, in a unique dosage, defore cutting. After 67 days, the percentage of cutting with callus, rooted, number and lengh of

  20. Método de aplicação do ácido indolbutírico na estaquia de cultivares de pessegueiro Application methods of indolebutiric acid in cutting rooting on peach cultivars

    Directory of Open Access Journals (Sweden)

    Mauro Brasil Dias Tofanelli

    2003-10-01

    trays using vermiculite as substrate, and put into the greenhouse under intermittent mist condition for 45 days. The best results of rooting were obtained with cultivar Okinawa (29% and with IBA concentrated solutions (9%. The results showed that the peach cultivars propagation by cuttings is not recommended.

  1. Effect of Planting Date on Physiological and MorphologicalCharacteristics of Four Canola Cultivars in Yasouj

    Directory of Open Access Journals (Sweden)

    M. H. Fallah Heki

    2012-08-01

    Full Text Available In order to study the physiological and morphological characteristics of canola cultivars at different planting dates, an experiment was carried out in 2008-2009 at the Agriculture Research Station of Yasouj. A factorial with Randomized Complete Block Design with four replications was conducted. Four planting dates (September 12, September 22, October 2 and October 12 and four cultivars (Zarfam, Okapi, Elite and SLM-046 were used in this study. Results showed that cultivars and planting dates had significant effects on more characteristics. In addition, interaction of planting date and cultivar was significant on plant height, height to lowest silique, number of branches, growth indices and grain yield. Zarfam and Elite cultivars had lower initial fluorescence (Fo and higher maximum fluorescence (Fm and photochemical capacity of photosystem II (Fv/Fm than Okapi and SLM-046 cultivars. Elite cultivar at September 12 planting date had the highest plant height (173 cm and height to lowest silique (87.5 cm and Okapi cultivar at October 12 planting date showed the lowest plant height (91 cm and height to lowest silique (43.7 cm. At September 12 planting date, Elite cultivar had the greatest leaf area index (5.21 and grain yield (5231 kg/ha. At other planting dates, Zarfam cultivar because of priority in leaf area index, crop growth rate and total dry matter have the greatest grain yield than other cultivars. In general, seems at September 12 planting date, Elite cultivar and for delayed sowing, Zarfam cultivar had better reaction than other cultivars.

  2. Genotype-environment interaction and stability in ten-year height growth of Norway spruce Clones (Picea abies Karst.).

    Science.gov (United States)

    J.B. St. Clair; J. Kleinschmit

    1986-01-01

    Norway spruce cuttings of 40 clones were tested on seven contrasting sites in northern Germany. Analysis of variance for ten-year height growth indicate a highly significant clone x site interaction. This interaction may be reduced by selection of stable clones. Several measures of stability were calculated and discussed. Characterization of sites by the method of...

  3. In-vitro mutation and multiplication of chrysanthemum cultivars

    International Nuclear Information System (INIS)

    Ahloowalia, B.S.

    1992-01-01

    Chrysanthemum is an important ornamental, grown as a cut and potted flower. No other flower rivals its volume of production and sale. As a result, growers are always on the look out for new or improved blooms which will maintain their market share. New and novel types of chrysanthemum were obtained for flower shape and size, and for plant height, by combining in-vitro radiation and micropropagation. This technique promises a rapid and efficinet method for obtaining new cultivars of vegetatively propagated plants. (author)

  4. Wedge cutting of mild steel by CO 2 laser and cut-quality assessment in relation to normal cutting

    Science.gov (United States)

    Yilbas, B. S.; Karatas, C.; Uslan, I.; Keles, O.; Usta, Y.; Yilbas, Z.; Ahsan, M.

    2008-10-01

    In some applications, laser cutting of wedge surfaces cannot be avoided in sheet metal processing and the quality of the end product defines the applicability of the laser-cutting process in such situations. In the present study, CO 2 laser cutting of the wedge surfaces as well as normal surfaces (normal to laser beam axis) is considered and the end product quality is assessed using the international standards for thermal cutting. The cut surfaces are examined by the optical microscopy and geometric features of the cut edges such as out of flatness and dross height are measured from the micrographs. A neural network is introduced to classify the striation patterns of the cut surfaces. It is found that the dross height and out of flatness are influenced significantly by the laser output power, particularly for wedge-cutting situation. Moreover, the cut quality improves at certain value of the laser power intensity.

  5. Enraizamento de estacas lenhosas e herbáceas de cultivares de caquizeiro com diferentes concentrações de ácido indolbutírico Rooting of hardwood and herbaceous cuttings of japanese persimmon tree cultivars treated with different concentration of indolbutyric acid

    Directory of Open Access Journals (Sweden)

    Débora Costa Bastos

    2005-04-01

    Full Text Available Desenvolveu-se este trabalho com o objetivo de estudar a capacidade de enraizamento de estacas lenhosas e herbáceas de cultivares de caquizeiro tratadas com AIB. Estacas lenhosas e herbáceas foram coletadas de ramos de caquizeiro das cultivares Pomelo, Rama Forte, Taubaté, Giombo e Fuyu e submetidas à aplicação de AIB (0; 3.000 e 6.000 mg.L-1 por vinte segundos. Em seguida, as estacas foram colocadas em canteiro contendo uma mistura de terra + esterco de curral (3:1 v/v como substrato (estacas lenhosas e em bandejas de poliestireno expandido, contendo vermiculita média, em câmara de nebulização intermitente (estacas herbáceas. Como conclusão, observou-se que as cultivares de caquizeiro apresentam diferenças quanto ao potencial de formação de raízes e brotações; estacas herbáceas apresentam maior tendência na propagação via estaquia em comparação às estacas lenhosas.This work was carried out with the objective to study the capacity of rooting of hardwood and herbaceous cuttings of Japanese persimmon tree cultivars treated with IBA. Hardwood and herbaceous cuttings were collected from branches of Japanese persimmon tree and submitted to treatments in function of cultivars (Pomelo, Rama Forte, Taubaté, Giombo and Fuyu and of application of IBA (0, 3,000 and 6,000 mg.L-1 for twenty seconds. Later the cuttings were placed in stonemason containing a soil mixture + corral manure (3:1 v/v as substrate (hardwood cuttings and in polyethylene trays containing vermiculite as substrate, in intermittent mist chamber (herbaceous cuttings. As conclusion is observed that the cultivars of Japanese persimmon tree present differences in relationship to potential of roots and shoots formation; herbaceous cuttings present higher tendency in the propagation through cutting in comparison with the hardwood cuttings.

  6. Aerodynamic Interactions During Laser Cutting

    Science.gov (United States)

    Fieret, J.; Terry, M. J.; Ward, B. A.

    1986-11-01

    Most laser cutting systems utilise a gas jet to remove molten or vaporised material from the kerf. The speed, economy and quality of the cut can be strongly dependent on the aerodynamic conditions created by the nozzle, workpiece proximity and kerf shape. Adverse conditions can be established that may lead to an unwelcome lack of reproducibility of cut quality. Relatively low gas nozzle pressures can result in supersonic flow in the jet with its associated shock fronts. When the nozzle is placed at conventional distances (1-2mm) above the workpiece, the force exerted by the gas on the workpiece and the cut products (the cutting pressure) can be significantly less than the nozzle pressure. Higher cutting pressures can be achieved by increasing the height of the nozzle above the workpiece, to a more damage resistant zone, provided that the shock structure of the jet is taken into account. Conventional conical nozzles with circular exits can be operated with conditions that will result in cutting pressures up to 3 Bar (g) in the more distant zone. At higher pressures in circular tipped nozzles the cutting pressure in this zone decays to inadequate levels. Investigations of a large number of non-circular nozzle tip shapes have resulted in the selection of a few specific shapes that can provide cutting pressures in excess of 6 Bar(g) at distances of 4 to 7mm from the nozzle tip. Since there is a strong correlation between cutting pressure and the speed and quality of laser cutting, the paper describes the aerodynamic requirements for achieving the above effects and reports the cutting results arising from the different nozzle designs and conditions. The results of the work of other investigators, who report anomalous laser cutting results, will be examined and reviewed in the light of the above work.

  7. Bromatological composition and dry matter digestibility of millet cultivars subjected to nitrogen doses

    Directory of Open Access Journals (Sweden)

    W.H.D. Buso

    2014-06-01

    Full Text Available The bromatological composition and in vitro dry matter digestibility of millet cultivars were assessed for different nitrogen doses and two sowing seasons in the Ceres municipality of Goiás state, Brazil. The treatments consisted of three millet cultivars (ADR-7010, ADR-500 and BRS-1501, four nitrogen (N doses (0, 50, 100 and 200kg ha-1 of N and two sowing seasons. Three replicates and a randomised block design with a 3 x 4 x 2 factorial scheme were used. Two cuttings were performed in each season when plants reached an average height of 0.70 cm. No significant interactions were observed between or among cultivars for N doses and dry matter (DM, crude protein (CP, neutral detergent fibre (NDF and acid detergent fibre (ADF contents. The DM, CP, NDF and ADF contents were significantly different between N doses. The DM and CP contents increased as the N dose increased to 100kg ha-1. The maximum DM and CP contents were 11.14 and 22.53%, respectively. The NDF and ADF contents were higher in the control treatment (60.11 and 30.01%, respectively. In addition, the lowest ADF and NDF concentrations occurred at an N dose of 50kg ha-1 (56.33 and 30.23%, respectively. The DM contents were higher for the February sowing, with an average of 10.59%. The highest CP and ADF contents were found for the December sowing (22.46 and 31.58%, respectively. No significant differences were found for millet cultivars, N doses or sowing seasons. A significant interaction was found between sowing season and millet cultivar. The BRS-1501 cultivar had a higher in vitro dry matter digestibility in the December/2010 sowing (73.88%.

  8. Common bean cultivars and lines interactions with environments

    Directory of Open Access Journals (Sweden)

    Carbonell Sérgio Augusto Morais

    2004-01-01

    Full Text Available The performance of bean lines brought forth in breeding programs or of cultivars in use can be affected by environmental variability. The adaptability and stability of grain yield of 18 common bean cultivars and lines in 23 environments (combinations of seasons, years and locations were evaluated in the State of São Paulo, Brazil. 'IAC-Carioca' and 'IAC-Carioca Eté' were used as standard cultivars for the carioca grain type, while 'FT-Nobre' and 'IAC-Una' represented the standard for black grains. The experiment was set up in a randomized complete block design with four replications and plots consisting of two, two central five meters rows flanked by border rows. Stability parameters were estimated by the methods Maximum Yield Deviations (MYD and by the Additive Main Effects and Multiplicative Interaction Analysis (AMMI. For the identification of the most stable cultivars, the two methods led to consistent results, although by MYD the highest stability was always associated to the highest yield. 'MAC-733327' and 'LP 9637' were the most suitable cultivars and lines for the joint seasons, while 'LP 9637' and 'FT-Nobre' were the most suitable for the dry season. The MYD method combined a simple procedure, easiness of result interpretation, uniqueness of parameters, and association between stability and yield. On the other hand, the AMMI method simplified the identification of stable cultivars by visual inspection, also providing information on the environments. However, the complex nature which combines uni-and multivariate techniques hampers its widespread use in breeding programs.

  9. Effect of cutting height and time on seed yield and seed quality of Stylosanthes guianensis CIAT 184

    OpenAIRE

    Pimpaporn Pholsen; Chureerat Satjipanon; Krailas Kiyothong

    2002-01-01

    The objectives of this experiment were to study the effect of cutting height and time on seed yield and seed quality of Stylosanthes guianensis CIAT 184 in Korat soil series at Khon Kaen Animal Nutrition Research Center, during April 2000 - May 2001. The experimental design was 2 × 4 factorial in randomized complete block design with 4 replications. The treatment consisted of 2 factors: - 1) Two levels of cutting height viz. 20 and 30 cm above ground; 2) Four periods of cutting time viz. at 6...

  10. Effects of Different Cutting Height on Nutritional Quality of Whole Crop Barley Silage and Feed Value on Hanwoo Heifers.

    Science.gov (United States)

    Kim, Dong Hyeon; Amanullah, Sardar M; Lee, Hyuk Jun; Joo, Young Ho; Han, Ouk Kyu; Adesogan, Adegbola T; Kim, Sam Churl

    2016-09-01

    The present study evaluated the effects of different cutting height on nutritive value, fermentation quality, in vitro and in vivo digestibility of whole crop barley silage. Whole crop barley forage (Yuyeon hybrid) was harvested at height of 5, 10, and 15 cm from the ground level. Each cutting height was rolled to make round bale and ensiled for 100 days. After 100 days of ensiling, pH of silage was lower (pcutting height. The content of lactate and lactate to acetate ratio were increased (pcutting height, whereas the acetate content was higher (pcutting height. Aerobic stability was greater (pcutting height. Three total mixed rations (TMR) were formulated with silages from the three different cutting heights (TMR5, TMR10, and TMR15) incorporated as forage at 70:30 ratio with concentrate (dry matter [DM] basis). In vitro dry matter digestibility was higher (pcutting height. The digestibility of DM and neutral detergent fiber were highest (pcutting height, at least up to 10 to 15 cm, of whole crop barley forage at harvest (Yuyeon) may be beneficial for making silage for TMR formulation and increasing digestibility of DM and NDF.

  11. Rendimiento agronómico de la morera por efecto de diferentes alturas y frecuencias de corte Agronomic yield of mulberry under different cutting heights and frequencies

    Directory of Open Access Journals (Sweden)

    Yolai Noda

    2007-09-01

    Full Text Available Con el objetivo de determinar el potencial de rendimiento de la morera variedad Tigreada, se estudiaron dos alturas (50 y 100 cm y dos frecuencias de corte (45 y 90 días, en un diseño totalmente aleatorizado, durante dos años consecutivos. En cada tratamiento se utilizaron 20 plantas para evaluar las variables agronómicas: rendimiento de materia seca de la biomasa total (RMSBT, rendimiento de materia seca de la biomasa comestible (RMSBC, rendimiento de materia seca de las hojas (RMSH, rendimiento de materia seca de los tallos tiernos (RMSTT y rendimiento de materia seca de los tallos leñosos (RMSTL, en los períodos lluvioso (PLL y poco lluvioso (PPLL. Para algunas de las variables agronómicas se encontró interacción significativa (PWith the objective of determining the yield potential of mulberry variety Tigreada, two cutting heights (50 and 100 and frequencies (45 and 90 days were studied, in a completely randomized design, for two consecutive years. Twenty plants were used in each treatment to evaluate the agronomic variables: dry matter yield of the total biomass (DMYBT, dry matter yield of the edible biomass (DMYEB, dry matter yield of the leaves (DMYL, dry matter yield of the fresh stems (DMYFS and dry matter yield of the ligneous stems (DMYLS, in the rainy (RS and dry seasons (DS. For some of the agronomic variables significant interaction (P<0,05 was found between the cutting frequency and height. When cutting every 90 days and at 50 cm of height, the highest values were for DMYL in the RS of the second year (91,7 g/plant, DMYTB in the RS of both years (134,7 and 183, 2 g DM/plant, respectively, and DMYLS in the RS of both years and the DS of the second year. The highest value for the DMYFS was found when cutting at 50 cm of height and every 45 days in the second year (27,1 g DM/plant; while the DMYTB in the DS of both seasons and the DMYL in both seasons were affected by the height, with the highest values when cutting at 50 cm

  12. Effect of cutting intervals and heights in forage productivity of Moringa oleifera.

    Directory of Open Access Journals (Sweden)

    Ramos-Trejo O.

    2015-07-01

    Full Text Available The use of Moringa oleifera as fodder is due to its good nutritional characteristics and high yield of fresh biomass. Eastern Yucatan, Mexico has favorable soil and climatic conditions for its establishment. The aim of this work was to estimate forage productivity of Moringa oleifera in two cutting intervals and three different heights. The experiment was conducted at the Experimental Site of Tizimín fron the National Institute of Forest, Agricultural and lLvestock Researches (INIFAP. The experimental units were placed in a completely randomized design with a 2 x 3 factorial arrangement and four replications. Forage yield was quantified and foliage samples were taken for DM content. Significant differences (p0.05 were found. In conclusion, during the evaluation of Moringa oleifera, it was found that the best performance in this work is obtained when the cuts on the soles are made every 60 days at a height of 40 cm (1.9119 t ha-1 cut-1; however, more agronomic studies of this plant are recommended in the eastern Yucatan, such as: planting density, arrangement, partnerships with other shrub species in the region, rain and dry periods, in order to have a viable and profitable option forage productivity of this plant.

  13. Effects of cutting height and maturity on the nutritive value of corn silage for lactating cows.

    Science.gov (United States)

    Neylon, J M; Kung, L

    2003-06-01

    We studied the effect of increasing the cutting height of whole-plant corn at the time of harvest from 12.7 (NC) to 45.7 (HC) cm on yield and nutritive value of silage for dairy cows. Three leafy corn silage hybrids were harvested at NC and HC at about 34% dry matter (E) and 41% DM (L) and ensiled in laboratory silos. Increasing the height of cutting lowered yields of harvested DM/ha. In addition, the concentrations of DM and starch were higher but the concentrations of lactic acid, crude protein, neutral detergent fiber (NDF), and acid detergent fiber were lower in HC than in NC. The concentration of acid detergent lignin was also lower in HC, but only in corn harvested at E. In vitro digestion (30 h) of NDF was greater in HC (50.7%) than NC (48.3%). Calculated yield of milk per tonne of forage DM was greater for HC than for NC at E but not at L. In a lactation experiment, increasing the height of cutting of another leafy corn silage hybrid, TMF29400, in general also resulted in similar changes in nutrient composition as just described. When fed to lactating dairy cows, HC corn silage resulted in tendencies for greater NDF digestion in the total tract, higher milk production and improved feed efficiency, but there were no differences in 3.5% fat corrected milk between treatments. Results of this study suggest that increasing the cutting height of whole plant corn at harvest can improve the nutritive value of corn silage for lactating dairy cows.

  14. Rooting of stem segments from fig tree cultivars

    Directory of Open Access Journals (Sweden)

    Rayane Barcelos Bisi

    2016-06-01

    Full Text Available Although Brazil is the largest fig (Ficus carica L. producer in the Southern Hemisphere, it mainly uses only one cultivar, ‘Roxo de Valinhos’. In addition, propagation is almost entirely through hardwood cuttings. Therefore, the aim of this study was to establish a propagation method that provides more successful rooting of stem segments of fig cultivars for the purpose of expanding the genetic base of the fig tree. The cultivars used were ‘Brunswick’, ‘Calabacita’, ‘Negro de Bursa’, ‘Mini Figo’, ‘Lampa Preta’, ‘Lemon’, ‘Troiano’,’ Nazaré’, ‘Três num Prato’, ‘Princesa’, ‘Colo de Dama’, ‘Montes’, ‘Bêbera Branca’, ‘Pingo de Mel’, and ‘Roxo de Valinhos’. The propagation methods used were layering, hardwood cuttings, nodal segments, herbaceous cuttings originating from the removal of sprouts, and herbaceous cuttings obtained during growth. We found that the propagation method influences the rooting of stem segments, and cultivars differ in their rooting potential.

  15. Height suppression of tomato plug seedlings by an environment ...

    African Journals Online (AJOL)

    Experiments were conducted to investigate appropriate concentrations of plant growth retardants (PGRs) and duration of seed soaking in order to suppress hypocotyl length and plug seedling height of 2 tomato cultivars ( Lycopersicum esculentum Mill. cv. Seogeon and Seokwang). Daminozide (B-9), uniconazole ...

  16. Multifocal laser surgery: cutting enhancement by hydrodynamic interactions between cavitation bubbles.

    Science.gov (United States)

    Toytman, I; Silbergleit, A; Simanovski, D; Palanker, D

    2010-10-01

    Transparent biological tissues can be precisely dissected with ultrafast lasers using optical breakdown in the tight focal zone. Typically, tissues are cut by sequential application of pulses, each of which produces a single cavitation bubble. We investigate the hydrodynamic interactions between simultaneous cavitation bubbles originating from multiple laser foci. Simultaneous expansion and collapse of cavitation bubbles can enhance the cutting efficiency, by increasing the resulting deformations in tissue, and the associated rupture zone. An analytical model of the flow induced by the bubbles is presented and experimentally verified. The threshold strain of the material rupture is measured in a model tissue. Using the computational model and the experimental value of the threshold strain one can compute the shape of the rupture zone in tissue resulting from application of multiple bubbles. With the threshold strain of 0.7 two simultaneous bubbles produce a continuous cut when applied at the distance 1.35 times greater than that required in sequential approach. Simultaneous focusing of the laser in multiple spots along the line of intended cut can extend this ratio to 1.7. Counterpropagating jets forming during collapse of two bubbles in materials with low viscosity can further extend the cutting zone-up to approximately a factor of 1.5.

  17. Cellulosic ethanol: interactions between cultivar and enzyme loading in wheat straw processing

    Directory of Open Access Journals (Sweden)

    Felby Claus

    2010-11-01

    Full Text Available Abstract Background Variations in sugar yield due to genotypic qualities of feedstock are largely undescribed for pilot-scale ethanol processing. Our objectives were to compare glucose and xylose yield (conversion and total sugar yield from straw of five winter wheat cultivars at three enzyme loadings (2.5, 5 and 10 FPU g-1 dm pretreated straw and to compare particle size distribution of cultivars after pilot-scale hydrothermal pretreatment. Results Significant interactions between enzyme loading and cultivars show that breeding for cultivars with high sugar yields under modest enzyme loading could be warranted. At an enzyme loading of 5 FPU g-1 dm pretreated straw, a significant difference in sugar yields of 17% was found between the highest and lowest yielding cultivars. Sugar yield from separately hydrolyzed particle-size fractions of each cultivar showed that finer particles had 11% to 21% higher yields than coarse particles. The amount of coarse particles from the cultivar with lowest sugar yield was negatively correlated with sugar conversion. Conclusions We conclude that genetic differences in sugar yield and response to enzyme loading exist for wheat straw at pilot scale, depending on differences in removal of hemicellulose, accumulation of ash and particle-size distribution introduced by the pretreatment.

  18. Production of cultivars of Anthurium andraeanum in Acorizal-MT conditions

    Directory of Open Access Journals (Sweden)

    Carmen Lúcia Ferreira Fava

    2014-11-01

    cover with sugarcane bagasse. The cultivars Eidibel and Supremo were the most productive with 2,4 stalks/month/plant; the bigger spathe was obtained by the cultivar Brasão with 17,2 cm of width and 12,6 cm length; and the cultivar Sonata presents the bigger spadix with 7,6 cm. The seven cultivars of anthurium, as a cut flower, develop and bloom satisfactorily.

  19. The Effects of Different Irrigation Regimes on the Morphological and Physiological Characteristics of Three Soybean Cultivars (Glycine max

    Directory of Open Access Journals (Sweden)

    N. Razmi

    2013-11-01

    Full Text Available To study the effect of different irrigation regimes on morphological and physiological characteristics of soybean cultivars, this experiment was conducted at Moghan Agricultural Research Center during 2009-2010 in Iran. The experiment was split plot based on randomized complete block design, with 3 replications. The main plots consisted of four irrigation regimes: I1, I2, I3 and I4 indicating irrigation after 60, 100, 140 and 180 mm evaporation from class A pan respectively and 3 soybean cultivars named Linford, L17 and Williams assigned in the sub plots. Results of combined analysis showed that with increasing irrigation intervals from I1 to I4 reduced growth period, plant height and leaf area index (LAI, number of nodes, branches and internodes significantly. Physiologic characteristics such as chlorophyll contain of leaves and relative water content (RWC were also affected by irrigation regimes. LAI in I1 was 4.94 reduced inI4to 3.70.Plant height of soybean cultivars were declined by 21% in I4 (irrigation after 180 mm evaporation as compared to I1 (irrigation after 60 mm evaporation. Soluble proline content of the leaves and electric conduction (EC on the other hand increases significantly. There was significant differences among cultivars concerning the vegetative and physiological characteristics. Willams and L17 cultivars produced the highest numbers of nodes (15.5 and internode length (4.95cm receptivity. The maximum proline content (65.6 µmol/F.W and relative water content (67.65% belonged to Linford cultivar. Interaction of irrigation regimes and cultivars was significant on plant hieght, LAI and proline content. Linford cultivar had more soluble proline under water limited condition and maintained higher LAI and plant height in I4 treatment as compared other treatments.

  20. Interaction of Vesicular-Arbuscular Mycorrhizae and Cultivars of Alfalfa Susceptible and Resistant to Meloidogyne hapla.

    Science.gov (United States)

    Grandison, G S; Cooper, K M

    1986-04-01

    The interaction between vesicular-arbuscular mycorrhizal (VAM) fungi and the root-knot nematode (Meloidogyne hapla) was investigated using both nematode-susceptible (Grasslands Wairau) and nematode-resistant (Nevada Synthetic XX) cultivars of alfalfa (Medicago sativa) at four levels of applied phosphate. Mycorrhizal inoculation improved plant growth and reduced nematode numbers and adult development in roots in dually infected cultures of the susceptible cultivar. The tolerance of plants to nematode infection and development when preinfected with mycorrhizal fungi was no greater than when they were inoculated with nematodes and mycorrhizal fungi simultaneously. Growth of plants of the resistant cultivar was unaffected by nematode inoculation but was improved by mycorrhizal inoculation. Numbers of nematode juveniles were lower in the roots of the resistant than of the susceptible cultivar and were further reduced by mycorrhizal inoculation, although no adult nematodes developed in any resistant cultivar treatment. Inoculation of alfalfa with VAM fungi increased the tolerance and resistance of a cultivar susceptible to M. hapla and improved the resistance of a resistant cultivar.

  1. Produção de massa seca e composição química de cinco cultivares de Cynodon = Dry matter production and chemical composition of five Cynodon cultivars

    Directory of Open Access Journals (Sweden)

    Luís Roberto de Andrade Rodrigues

    2006-07-01

    Full Text Available O experimento foi conduzido na Faculdade de Ciências Agrárias e Veterinárias, Unesp, Jaboticabal, Estado de São Paulo. Os tratamentos consistiram na avaliação de 5 cultivares de Cynodon, em 11 idades de corte, para estudo da característica crescimento e 5 idades para a avaliação da composição química. O delineamento experimental foi ointeiramente casualizado em parcelas subdivididas, com 3 repetições, considerando-se, nas parcelas, as cultivares (C e, nas subparcelas, as idades de corte (I. Foram avaliados a produção de massa seca (PMS, a relação folha/colmo, os teores de proteína bruta (PB, defibra em detergente neutro (FDN e de fibra em detergente ácido (FDA, nas folhas, nos colmos e na planta inteira. A PMS aumentou dos 14 aos 84 dias (PThe experiment was carried out at the Faculty of Ciências Agrárias e Veterinárias, Unesp, Jaboticabal, São Paulo State. The treatments aimed to evaluate five Cynodon cultivars at eleven cutting ages to study the characteristics of growing, and at five cutting ages toevaluate the chemical composition. A random design with split plot was adopted, with three replications, considering cultivars as plot and cutting age as subplots. The following variables were studied: dry matter (DM production, leaf/stem ratio and the contents of crude protein (CP, neutral detergent fiber (NDF and acid detergent fiber (ADF, in green leaf, stem and total plant. The highest DM production was from 14 to 84 days (P<0.01, and did not differ among cultivars. The leaf/stem ratio differ (P<0.01 among cultivars (C and decreased with plant age (I showing interaction C x I. The CP contents of the total plant were superior to the stem and inferior to the leaf. The NDF and ADF contents were similar among cultivars. The Cynodon cultivars would be better managed during 28 days of plant growth.

  2. Shoe collar height effect on athletic performance, ankle joint kinematics and kinetics during unanticipated maximum-effort side-cutting performance.

    Science.gov (United States)

    Lam, Gilbert Wing Kai; Park, Eun Jung; Lee, Ki-Kwang; Cheung, Jason Tak-Man

    2015-01-01

    Side-step cutting manoeuvres comprise the coordination between planting and non-planting legs. Increased shoe collar height is expected to influence ankle biomechanics of both legs and possibly respective cutting performance. This study examined the shoe collar height effect on kinematics and kinetics of planting and non-planting legs during an unanticipated side-step cutting. Fifteen university basketball players performed maximum-effort side-step cutting to the left 45° direction or a straight ahead run in response to a random light signal. Seven successful cutting trials were collected for each condition. Athletic performance, ground reaction force, ankle kinematics and kinetics of both legs were analysed using paired t-tests. Results indicated that high-collar shoes resulted in less ankle inversion and external rotation during initial contact for the planting leg. The high-collar shoes also exhibited a smaller ankle range of motion in the sagittal and transverse planes for both legs, respectively. However, no collar effect was found for ankle moments and performance indicators including cutting performance time, ground contact time, propulsion ground reaction forces and impulses. These findings indicated that high-collar shoes altered ankle positioning and restricted ankle joint freedom movements in both legs, while no negative effect was found for athletic cutting performance.

  3. Germination and development of pecan cultivar seedlings by seed stratification

    Directory of Open Access Journals (Sweden)

    Igor Poletto

    2015-12-01

    Full Text Available Abstract: The objective of this work was to evaluate the effect of seed stratification on germination rate, germination speed, and initial development of seedlings of six pecan (Carya illinoinensis cultivars under subtropical climatic conditions in southern Brazil. For stratification, the seeds were placed in boxes with moist sand, in a cold chamber at 4°C, for 90 days. In the fourteenth week after sowing, the emergence speed index, total emergence, plant height, stem diameter, and number of leaves were evaluated. Seed stratification significantly improves the germination potential and morphological traits of the evaluated cultivars.

  4. A Study on soybean cultivar and rhizobium strain interaction related to biological nitrogen fixation in different soils

    International Nuclear Information System (INIS)

    Pirvali Biranvand, N.

    1999-01-01

    Since, symbiotic effectiveness is affected by three important factors such as bacteria genotype, plant cultivar and environmental conditions (e.g. soil properties). In this research, simple and interaction effects of the first two factors about symbiosis of three soybean cultivar, which are most commonly cultivated soybean, with several commercial strain of bacteria with three different soils is investigated. For this purpose five Bradyrhizobium japonicum commercial strains (Rhizoking, Helinitro, Goldoat, Biodoz and CB 1809) were taken from soil and water rea search institute. Based on assurance of bacteria strains purity and ineffectiveness with cultivars, for comparison of strains symbiotic effectiveness with soybean cultivars and the best strain selection performed a factorial experiment with RCBD in 24 treatments and 4 replication. The seeds of soybean cultivars were cultivated in Growth chamber under Leonard jar system. The treatment used were 3 levels of soybean cultivar, 5 levels of Bradyrhizobium strains and 3 levels of Nitrogen (0, 35 and 70 PPM). Plants were fed with Brought on and Dil worth solution (1970) for 75 days. Then, plants were harvested and dried. Selective parameters were analysed by MSTATC program. The results indicated that, all bacteria stains were highly effective as far as symbiotic effectiveness is concerned. Eventually Rhizoking, Gold coat and Helinitro stains selected for soybean inoculation. Provided for pot culture, two soil samples from soybean original planting area (in the subregion of Gorgan and Sari cities) and another sample from Karaj countryside were taken with moderate, high and zero symbiont indigenous bacteria levels respectively. For study of interaction and simple effects of Bacteria strain and soybean cultivar in each soil; a factorial experiment with RCBD in 4 replication performed. Factors were contained soybean cultivar (three levels) and three Bacteria strain with a blank treatment for inoculation. In this respect

  5. Diversity of fungi colonizing leaves of Rhododendron (Rhododendron L. cuttings

    Directory of Open Access Journals (Sweden)

    Barbara Kierpiec-Baran

    2014-04-01

    Full Text Available Rhododendrons (Rhododendron L. are shrubs whose attractiveness is determined by their multi-coloured flowers and evergreen leaves. Necroses visible on the leaves of rhododendron cuttings diminish the suitability of nursery material for marketing. These symptoms are most frequently caused by fungi. The investigations were conducted in 2010–2011 in an ornamental shrub nursery to identify fungi colonizing the phyllosphere of rhododendron cuttings and causing leaf necroses. The material for analysis consisted of leaves of 11 rhododendron cultivars. 550 leaves were collected from 110 half-year-old cuttings for mycological analysis. Over 350 fungal colonies belonging to 15 species were isolated from the leaves of rhododendron cuttings. The dominants included: Pestalotiopsis sydowiana, Trichoderma koningii and Alternaria alternata. The influents included: Aspergillus brasiliensis, Mucor hiemalis f. hiemalis, Epicoccum nigrum, Sordaria fimicola and Umbelopsis isabellina. A large majority of the fungi preferred the phyllosphere environment of Yakushima rhododendron (R. yakushimanum cultivars ‘Sneezy’ and ‘Golden Torch’ as well as of the large-flowered cultivars ‘Flautando’, ‘Dominik’, and ‘Simona’. The phyllosphere of the large-flowered cultivars ‘Bernstein’, ‘Nova Zembla’, and ‘Goldbuckett’ was a reservoir for many fungal colonies and fungi species. The cultivars less susceptible to colonization by fungi and the most promising for planting in green areas and home gardens are the large-flowered cultivars ‘Bernstein’, ‘Nova Zembla’, ‘Goldbuckett’, ‘Rasputin’, and ‘Roseum Elegans’.

  6. Marcha de absorção dos micronutrientes para mudas de goiabeiras cultivares Paluma e Século XXI Micronutrient uptake in ‘Paluma’ and ‘Século XXI’ guava cuttings

    Directory of Open Access Journals (Sweden)

    Claudenir Facincani Franco

    2008-01-01

    Full Text Available O conhecimento da marcha de absorção dos micronutrientes em mudas de goiabeira garante melhor eficiência da adubação. O objetivo do trabalho foi determinar a marcha de absorção de micronutrientes em mudas de duas cultivares de goiabeira. O delineamento experimental utilizado foi em parcelas subdivididas com três repetições. Assim, foram utilizadas como tratamentos principais duas cultivares de goiabeira (Paluma e Século XXI obtidas por estacas herbáceas e como subparcelas, sete coletas de plantas, ao longo do período experimental (120 dias. Nos diferentes órgãos das mudas (folhas, caule e raízes, avaliou-se o acúmulo de micronutrientes, a cada quinze dias. A muda de goiabeira da cultivar Século XXI é mais exigente em micronutrientes do que as mudas da cultivar Paluma. O acúmulo médio de micronutrientes pelas mudas de goiabeira obedeceu à seguinte seqüência: Fe>Mn>Zn>B>Cu, sendo maior nas folhas para B, Cu, Mn e Zn, e nas raízes para Fe. O acúmulo de micronutrientes para as cultivares Paluma e Século XXI em µg por planta foi de: B (632 e 783, Cu (134 e 158, Fe (8103 e 5534, Mn (3052 e 3709 e Zn (760 e 997 respectivamente.Understanding micronutrient uptake in guava cuttings guarantees efficient fertilization. This research was undertaken to measure micronutrient uptake in cuttings from two guava cultivars. The experimental design was arranged in split-plots with three replications. Plots were represented by herbaceous cuttings from the guava cultivars 'Paluma' and 'Século XXI', while split-plots were the seven sampling dates during a 120-day period in nutritive solution. Accumulation of micronutrients was determined in the different plant organs every two weeks. The guava cultivar 'Século XXI' has higher micronutrient requirements than 'Paluma'. The mean micronutrient accumulation followed the order: Fe>Mn>Zn>B>Cu. The accumulation of B, Cu, Mn and Zn was higher in leaves, while Fe was more accumulated in roots

  7. TransCut: interactive rendering of translucent cutouts.

    Science.gov (United States)

    Li, Dongping; Sun, Xin; Ren, Zhong; Lin, Stephen; Tong, Yiying; Guo, Baining; Zhou, Kun

    2013-03-01

    We present TransCut, a technique for interactive rendering of translucent objects undergoing fracturing and cutting operations. As the object is fractured or cut open, the user can directly examine and intuitively understand the complex translucent interior, as well as edit material properties through painting on cross sections and recombining the broken pieces—all with immediate and realistic visual feedback. This new mode of interaction with translucent volumes is made possible with two technical contributions. The first is a novel solver for the diffusion equation (DE) over a tetrahedral mesh that produces high-quality results comparable to the state-of-art finite element method (FEM) of Arbree et al. but at substantially higher speeds. This accuracy and efficiency is obtained by computing the discrete divergences of the diffusion equation and constructing the DE matrix using analytic formulas derived for linear finite elements. The second contribution is a multiresolution algorithm to significantly accelerate our DE solver while adapting to the frequent changes in topological structure of dynamic objects. The entire multiresolution DE solver is highly parallel and easily implemented on the GPU. We believe TransCut provides a novel visual effect for heterogeneous translucent objects undergoing fracturing and cutting operations.

  8. Avaliação de cultivares de alfafa na Zona da Mata de Minas Gerais Evaluation of alfalfa cultivars in the region of Zona da Mata, Minas Gerais

    Directory of Open Access Journals (Sweden)

    Francisco José da Silva Lédo

    2004-10-01

    Full Text Available Realizou-se este trabalho com o objetivo de avaliar e selecionar cultivares de alfafa (Medicago sativa L. mais adaptadas às condições edafoclimáticas da Zona da Mata de Minas Gerais. O ensaio foi conduzido no campo experimental da Embrapa Gado de Leite, em Coronel Pacheco-MG, no delineamento experimental de blocos casualizados com duas repetições. Foram avaliadas 59 cultivares no período de 31/8/1999 a 10/12/2001, realizando-se 16 cortes de avaliação. Avaliaram-se a produção de matéria seca (PMS, altura da planta (AP, vigor (VG, porcentagem de floração (FLO, relação folha/caule (RFC, e incidência de doenças (ID e pragas (IP. Para PMS, AP, VG, FLO e ID, observaram-se diferenças significativas entre as cultivares. As cultivares P-30, Crioula C-1, Crioula C-3 e Crioula C-2 foram as que apresentaram maiores PMS (13,17; 13,13; 13,00 e 12,48 t/ha/ano, respectivamente. As cultivares apresentaram maior FLO (18,98% e AP (54,13 cm nos cortes realizados no período de verão, quando comparado com os de inverno (6,11% e 46,60 cm, respectivamente. Com base nos resultados obtidos, foram selecionadas as cultivares P-30, Crioula C-1, Crioula C-3 e Crioula C-2.The objective of this experiment was to evaluate and select the alfalfa cultivars (Medicago sativa L. best adapted to the climate and soil of Zona da Mata, in Minas Gerais, Brazil. The trial was carried out at Embrapa Gado de Leite, in the experiment station located in Coronel Pacheco, MG, using a randomized complete block design with two replications. Fifty-nine cultivars studied between Sept. 9, 1999 and Dec. 10, 2001 were submitted to 16 evaluating cuts. Dry matter production (DMP, plant height (PH, vigor (VG, flowering percent (FLO, leaf/stem ratio (RFC and disease (D and pests (P occurrence were observed. There were significant differences among cultivars regarding to DMP, PH, VG, FLO and D. Cultivars P-30, Crioula C-3 and Crioula C-2 showed the highest DMP (13,17; 13,13; 13,00 e 12

  9. Fluorescence studies by quenching and protein unfolding on the interaction of bioactive compounds in water extracts of kiwi fruit cultivars with human serum albumin

    Energy Technology Data Exchange (ETDEWEB)

    Seo Park, Yong, E-mail: ypark@mokpo.ac.kr [Department of Horticultural Science, Mokpo National University, Muan, Jeonnam (Korea, Republic of); Polovka, Martin [National Agricultural and Food Centre VUP, Food Research Institute, SK-824 75 Bratislava (Slovakia); Leticia Martinez-Ayala, Alma [Centro de Desarrollo de Productos Bioticos, Instituto Politécnico Nacional, Carretera Yautepec-Jojutla, Km. 6, calle CEPROBI No. 8, Col. San Isidro, Yautepec, Morelos 62731 (Mexico); González-Aguilar, Gustavo A. [Research Center for Food & Development, A.C. (CIAD), Carretera a Ejido La Victoria, Km 0.6, Hermosillo, Sonora 83304 (Mexico); Ham, Kyung-Sik; Kang, Seong-Gook; Park, Yang-Kyun [Department of Food Engineering, Mokpo National University, Muan, Jeonnam (Korea, Republic of); Heo, Buk-Gu [Naju Foundation of Natural Dyeing Culture, Naju 520-931 (Korea, Republic of); Namiesnik, Jacek [Department of Analytical Chemistry, Chemical Faculty, Gdańsk University of Technology, 80 952 Gdańsk (Poland); Gorinstein, Shela, E-mail: shela.gorin@mail.huji.ac.il [The Institute for Drug Research, School of Pharmacy, The Hebrew University, Hadassah Medical School, Jerusalem 91120 (Israel)

    2015-04-15

    The main aim of this investigation was to characterize new kiwi fruit cultivars after cold storage treatment and to determine the similarities and differences between them, using spectroscopic methods. The chemometric comparison of kiwi fruit cultivars based on physicochemical indices during cold storage was carried out. All kiwi fruit cultivars showed a high level of correlation between the contents of phenolic compounds (polyphenols, tannins and flavonoids) and their antioxidant capacities. The interactions of soluble polyphenols of different kiwi fruit cultivars with human serum albumin (HSA) were investigated by fluorescence. The obtained statistical and fluorescence results allow to classify the investigated kiwi fruit cultivars according to their properties. The antioxidant properties of different cultivars monitored by β-carotene assay showed that the highest percentage of antioxidant activity (%AA) at the end of the cold storage was detected for ‘SKK-12’ (27.61±2.44) %AA with the lowest shelf life (8 weeks) and the lowest was found for ‘Hayward’ variety (8.33±0.74) %AA with the highest shelf life (24 weeks). The averaged amount of polyphenols in ‘Bidan’ and ‘SKK-12’ 13.97±1.95 mg GAE/g was much higher than in other cultivars 3.93±3.26 mg GAE/g, without respect on time of cold storage. The HSA-binding capacities of these cultivars were the highest and correlated with their antioxidant capacities. To our knowledge this is the first report showing differences and similarities in new kiwi fruit cultivars, using spectroscopic techniques. The fact that fluorescence spectral methods are applied as a powerful tool to show the photophysical properties of intrinsic fluorophores in protein molecules in the presence of fruit extracts is important in this study. In conclusion, the obtained knowledge would contribute to the pharmaceutical development and clinical application of kiwi fruit extracts. - Highlights: • Different kiwi fruit cultivars

  10. Heredity of flake- and stripe-variegated traits and their introduction into Japanese day-neutral winter-flowering sweet pea (Lathyrus odoratus L.) cultivars.

    Science.gov (United States)

    Yagishita, Yoshimi; Hara, Yasuhide; Nakayama, Masayoshi

    2018-01-01

    Sweet pea ( Lathyrus odoratus L.) is a major cut flower in Japan, generally grown in greenhouses in winter to spring. The wild-type sweet pea is a long-day summer-flowering plant. The day-neutral winter-flowering ability, which allows cut-flower production in Japan, is a recessive phenotype that emerged by spontaneous mutation. Although Japanese winter-flowering cultivars and additionally spring-flowering cultivars, which have semi-long-day flowering ability generated by crossing the winter- and summer-flowering cultivars, have superior phenotypes for cut flowers, they have limited variation in color and fragrance. In particular, variegated phenotypes do not appear in modern winter- and spring-flowering cultivars, only in summer-flowering cultivars. We try to expand the phenotypic diversity of Japanese cut flower cultivars. In the processes, we introduced the variegated phenotypes by crossing with summer-flowering cultivars, and succeeded in breeding some excellent cultivars. During breeding, we analyzed the segregation ratios and revealed the heredity of the phenotypes. Here we review the heredity of these variegated phenotypes and winter-flowering phenotypes and their related genes. We also describe how we introduced the trait into winter-flowering cultivars, tracing their pedigrees to show both phenotypes and genotypes of the progeny at each generation. This knowledge is useful for the efficient breeding of new variegated cultivars.

  11. Body mass index and waist-to-height ratio cut-offs as predictors of high blood pressure in adolescents

    Directory of Open Access Journals (Sweden)

    Kurnia Febriana

    2015-04-01

    Full Text Available Background: Obesity is associated with increased risk for high blood pressure (BP. Although a routine BP measurement is indicated for all children visiting pediatric practice, recognition of children particularly at risk may save times. The aim of this study was to assess the cut-off point for body mass index (BMI and waist-to-height ratio (WHtR to predict high BP in adolescents. Methods: We conducted a cross-sectional study on 928 children aged 11 to 16 years in Yogyakarta. BP were measured using standard technique described by The Fourth Report on The Diagnosis, Evaluation, and Treatment of High Blood Pressure in Children and Adolescents. BMI was adjusted for age and sex using the WHO 2007 growth reference. WHtR was ratio of waist circumference related to height in centimeters. Receiver operating characteristic (ROC curves were used to estimate the best cut-offs. Results: The best cut-off point for BMI-for-age Z-score (BMIZ to predict high BP was 0.51 with sensitivity and specificity of 82% (95% CI = 78-86 and 76% (95% CI = 67-78 for systolic BP and sensitivity and specificity of 82% (95% CI = 78-86 and 72% (95% CI = 68-76 for diastolic BP. The best cut-off point for WHtR was 0.45, with sensitivity of 76% (95% CI = 67-78 and specificity of 74% (95% CI = 71-79 for systolic BP and sensitivity of 76% (95% CI = 72-80 and specificity of 70% (95% CI = 61-75 for diastolic BP.Conclusion: BMIZ of 0.51 and WHtR of 0.45 are the best cut-off point to predict high BP in adolescents.

  12. Soil-atmosphere interaction in unsaturated cut slopes

    Directory of Open Access Journals (Sweden)

    Tsiampousi Aikaterini

    2016-01-01

    Full Text Available Interaction between atmosphere and soil has only recently attracted significant interest. Soil-atmosphere interaction takes place under dynamic climatic conditions, which vary throughout the year and are expected to suffer considerable alterations due to climate change. However, Geotechnical Analysis has traditionally been limited to simplistic approaches, where winter and summer pore water pressure profiles are prescribed. Geotechnical Structures, such as cut slopes, are known to be prone to large irreversible displacements under the combined effect of water uptake by a complex vegetation root system and precipitation. If such processes take place in an unsaturated material the complexity of the problem renders the use of numerical analysis essential. In this paper soil-atmosphere interaction in cut slopes is studied using advanced, fully coupled partially saturated finite element analyses. The effect of rainfall and evapotranspiration is modelled through sophisticated boundary conditions, applying actual meteorological data on a monthly basis. Stages of low and high water demand vegetation are considered for a period of several years, before simulating the effect of vegetation removal. The analysis results are presented with regard to the serviceability and stability of the cut slope.

  13. Development, yield and quality attributes of sugarcane cultivars fertigated by subsurface drip irrigation

    Directory of Open Access Journals (Sweden)

    André L. B. de O. Silva

    2016-06-01

    Full Text Available ABSTRACT The present study aimed to evaluate the development, yield and quality of four sugarcane cultivars fertigated by subsurface drip system. The experiment was carried out in Campinas-SP, Brazil, from January 2012 to November 2013, with the cultivars SP79-1011, IACSP94-2101, IACSP94-2094 and IACSP95-5000 subjected to daily irrigations. The irrigations depths were applied to bring soil moisture to field capacity. Soil moisture was monitored using soil moisture probes. Samples were collected along the crop cycle in order to evaluate crop development and yield, at the end of the first and second ratoons. Stalk height showed good correlation for the estimation of crop yield, with R2 equal to or higher than 0.96. The cultivar IACSP95-5000 showed the highest yield in the first ratoon. In the second ratoon the highest yield was observed in IACSP94-2101, followed by IACSP95-5000 and SP79-1011. Considering the yield results associated with the technological analysis, such as soluble solids content and apparent sucrose, the cultivar IACSP95-5000 excelled the others in the cultivation under subsurface drip irrigation.

  14. Effects of sowing methods and potassium application on the performance of two Alfalfa cultivars (Medicago sativa L.)

    International Nuclear Information System (INIS)

    Elhag, B.B.M.

    2007-03-01

    A field experiment was conducted at the Demonstration Farm of the Faculty of Agriculture, Islamic University of Omdurman during the period from december 2004 to may 2006 to evaluate the effects of three sowing methods (sowing on flat, ridges and mustaba) and the tow levels of potassium fertilizer, (0 k 0 and 50 kg/ha k 1 ) on the performance of alfalfa (Medicago sativa L.). This was carried out using tow cultivars, Hegazi (local) and Alfanafa (introduced). A randomized complete block design with four applications in factorial experiment was used to layout the work field. Sowing was done in the last week of december 2004 at a seed rate of 20 kg/ha by broadcasting the seeds on flat, ridge and mustaba. The first irrigation was applied immediately and the second was done five days after sowing. Subsequent irrigations were performed at an interval of seven days between irrigations during summer and ten days during winter, depending on the weather conditions. A seedling emergence was observed 3 to 5 days after sowing. Weeding was done manually when necessary. The first cut was done 70 days after sowing, when 50% of the plants were in the bloom stage, and the subsequent ones were done monthly, using a sickle, just a above the soil surface. A After the last cut (in Feb 2006), when environmental conditions were favorable, the plants were left were for seed yield which was harvested in April, 2006. Data were collected on plant height, plant population, leaf area index, leaf to stem ratio, fresh weight, dry weight, potassium content in plant, seed-yield and its components. The results revealed that there were significant differences between cultivars, sowing methods, potassium application and all possible interactions between the different treatments for all parameters except number of pods/raceme and total seed-weight in all treatments, leaf to stem ratio, leaf area index, number of racemes/plant, number of seeds/pod and 1000-seed weight in sowing methods and potassium

  15. Effects of Salinity on Yield and Component Characters in Canola (Brassica napus L. Cultivars

    Directory of Open Access Journals (Sweden)

    Ahmad BYBORDI

    2010-03-01

    Full Text Available Cultivars �Okapi�, �SLM046�, �Elite�, �Fornax� and �Licord� Brassica napus were tested for yield and component characters under different levels of salinity. The variations due to salinity levels, cultivars and cultivarxsalinity (interaction were significant for different characters. The variable degrees of increase and decrease of regression coefficient estimate mates (curve estimation showed the performance as influenced by different salinity levels. The performance of Brassica napus variety in plant height and days to first flowering was the best for �SLM046�, �Okapi� �SLM046� and �Okapi� cultivars. �SLM046� showed the best performance in days to maturity, followed by �Licord� and �Elite�. �Okapi� performed better than others regarding the increased number of seeds per plant and seed yield per plant, followed by �Fornax�. Considering all characters, the most tolerance ability was found in �SLM046� and �Okapi�, against different levels of salinity.

  16. BRS 374 – Wheat cultivar

    Directory of Open Access Journals (Sweden)

    Eduardo Caierão

    2013-01-01

    Full Text Available BRS 374 is a wheat cultivar developed by Embrapa. It resulted from a cross between the F1 generation of PF 88618/Coker80.33 and Frontana/Karl. BRS 374 belongs to the soft wheat class, has a low plant height, a high potential grain yield, andwhite flour.

  17. Adubação orgânica e altura de corte da erva-cidreira brasileira Organic fertilization and cutting height of Lippia alba

    Directory of Open Access Journals (Sweden)

    Maurício R.A. Santos

    2004-06-01

    Full Text Available Avaliou-se os efeitos da adubação orgânica e de alturas de corte em plantas de Lippia alba, quimiotipo limoneno-carvona, na produção de matéria seca foliar e de óleo essencial, no Nordeste brasileiro. As doses 0; 2 e 4 kg m-2 de adubo foram aplicadas em parcelas subdivididas em cortes de 15; 30 e 45 cm de altura, agrupadas em blocos casualizados. Foram realizadas colheitas aos 60 e 120 dias após o plantio. A adubação não influenciou significativamente as produções de matéria seca foliar e de óleo essencial. O corte a 45 cm de altura resultou na maior produção de matéria seca foliar. As maiores concentrações de óleo essencial foram obtidas nos cortes a 30 e 45 cm de altura.The effects of organic fertilization and cutting height on dry matter and essential oil production from leaves of Lippia alba, limonene-carvone chemotype, were evaluated in the Northeastern Brazilian Region. A split plot experiment was conducted with the organic fertilization (0; 2 and 4 kg m-2 as main plots and 15; 30 and 45 cm cutting height as subplots. First harvest was done 60 days and the second 120 days after planting date. Dry matter and essential oil production were not influenced by fertilization. Highest dry matter production was observed on 45 cm cutting height. Highest essential oil production was obtained on 30 and 45 cm cutting height.

  18. Changes During Growth in Cell Wall Components of Berseem Clover Under Different Cutting Treatments in a Mediterranean Region

    Directory of Open Access Journals (Sweden)

    Giuditta De Santis

    2007-09-01

    Full Text Available Forage digestibility of berseem clover (Trifolium Alexandrinum L. is influenced by plant cell wall composition. This study was conducted to evaluate the effects of different cutting treatments on cell-wall components of the herbage and plant fractions in two Mediterranean berseem genotypes during growth and to examine the relationship between digestibility and cell wall components in these plant fractions. Cutting treatments were initiated at sixth internode elongation (A and early flowering (B and there was an uncut control treatment (C. Spring growth of genotypes of Egyptian (cv. Giza 10 and Italian (cv. Sacromonte origins was harvested in each of two years beginning 196 days after sowing and thereafter every 6 days (twelve harvests in total to measure cell wall components. Neutral detergent fibre (NDF, acid detergent fibre (ADF and acid detergent lignin (ADL concentrations were determined for leaf, stem, and total forage of each cultivar at each harvest. Without defoliation, NDF, ADF and ADL concentrations of herbage increased linearly to a maximum of 528, 375 and 84 g kg-1 DM, respectively, by 220 days after planting, when plant height reached maximum values, then plateaued until 257 days after planting. Plant parts differed in cell-wall concentration, with stems being of higher fibre components than leaves, in the two cutting treatments. Herbage and plant fraction fibre concentrations were negatively correlated with digestibility for all cutting treatments. Defoliation induced a reduction in fibre concentrations and plant height, although a rapid regrowth was observed after cutting, in both treatments A and B. However, delaying defoliation to the early flowering stage (B increased fibre components concentrations both at cutting time and during the growing season and significantly reduced the regrowth height. Conversely, plants cut at the sixth internode elongation (treatment A showed lower concentrations of fibre fractions than initiating

  19. Evaluating the Competitive Ability of Sunflower (Helianthus annuus L. Cultivars against Tumble Pigweed (Amaranthus albus L. in Birjand Region

    Directory of Open Access Journals (Sweden)

    mohammad javad babaie zarch

    2017-09-01

    significant difference between the sunflower cultivars for Competitive Index (P≤0.01. While, different densities of tumble pigweed had no significant effect on Competitive Index. However, the interaction effect between sunflower cultivar and tumble pigweed density was significant on this index (P≤0.05. The highest competitive ability index (1.6 was obtained in the Jame Esfehan cultivar, Followed by Euroflour, Azargol, Progress, Farrukh and Syrna cultivars. Although weed biomass decreased index was not affected by weed density, it increased by 11% with enhancing weed density from 5 to 15 plants m-2. In this study, tolerance index was significant only by the effect of weed density (P≤0.01. In general tolerance index increased by 13.3 and 39.03 percent by increasing the weed density from 5 to 10 and 15 plants m-2. This index for 5, 10 and 15 plants m-2 of weed densities were 127, 144 and 177, respectively. The results showed that rapid emergence and height increasing rate at first 53 days after planting and leaf area development rate between 17 to 53 days after planting were the most important effective factors that increase sunflower competitiveness against tumble pigweed. Conclusion In general, Jame Esfehan cultivar had the greatest competitive ability against tumble pigweed due to a rapid emergence, height increasing and leaf area development rates at 24 days after planting. Progress, Azargol, Euroflor and Farrokh cultivars had medium competitive abilities. Syrna had a weak competitive ability due to late emergence, as well as low rates of height increasing and leaf area development In order to evaluate the competitiveness of some sunflower cultivars against tumble pigweed, a factorial experiment based on completely randomized design was conducted at the research farm of College of Agriculture, University of Birjand in 2012. Experimental factors included four different weed densities (0, 5, 10 and 15 plants m-2 and six cultivars of sunflower (Azargol, Jame Esfahan

  20. Growth control of kalanchoe cultivars Rako and Gold Strike by ...

    African Journals Online (AJOL)

    After soaking treatment, the cuttings were rooted in a fog tunnel with mean daily air temperature of 18.2°C and RH of 66%. Three replicates per treatment and eight plants per each replicate were used. All cuttings rooted well in all treatments. At all applied concentrations, plant height and stem internode length decreased ...

  1. Dry matter production and chemical composition of Massai grass submitted to nitrogen rates and cutting heights

    Directory of Open Access Journals (Sweden)

    Giselle Abadia Campos Pereira

    2016-09-01

    Full Text Available The study was carried out in a greenhouse with a 4X4 factorial arrangement randomized block design in order to evaluate the effects of nitrogen rates (0, 50, 100 and 150 mg dm-3 associated with cutting heights (10, 15, 20 and 25 cm on dry matter production and the chemical composition of Massai grass. The seeding was done in pots with 11 kg of soil. 10 plants were kept per pot, and there were two cuts every 35 days. Nitrogen fertilization was split between the two cuts, where the first N application occurred after the uniformity cut and the second after the first cut. In each cut the plants were separated and weighed for botanical component evaluation: leaf blade and stem + sheath. After this, the samples were homogenized and analysed for dry matter (DM, crude protein (CP and neutral detergent fibre (NDF content. In the first cut, the N fertilization caused a linear increase in DM production of 0.058 g pot-1 per each 1 mg dm-3 of N applied, as well as causing an increase of 0.549% in CP percentage, a 0.0124 pot-1 g increase in CP production and a reduction of 0.055% in NDF. In the second cut, N rates promoted a quadratic effect on DM production. A maximum DM production of 16.48 g pot-1 with 107.27 mg dm-3 of N was observed while CP production content was increased by 0.0092 g pot-1 for each 1 mg dm-3 N applied. In terms of linear responses to DM and PB, as well as the use efficiency calculated for Massai grass, recommended N doses range between 50 and 100 g dm-3.

  2. Phytoremediation of polycyclic aromatic hydrocarbons (PAH) by cv. Crioula: A Brazilian alfalfa cultivar.

    Science.gov (United States)

    Alves, Wilber S; Manoel, Evelin A; Santos, Noemi S; Nunes, Rosane O; Domiciano, Giselli C; Soares, Marcia R

    2018-07-03

    This work aimed to evaluate the phytoremediation capacity of the alfalfa cultivar Crioula in soils contaminated with polycyclic aromatic hydrocarbons (PAHs), primary pollutants with mutagenic and carcinogenic potential. Alfalfa was grown from seed for 40 days on soil amended with anthracene, pyrene, and phenanthrene. Soil and plant tissue was collected for biometric assay, dry mass analysis, and PAH analysis by liquid chromatography. Increased total PAH concentration was associated with decreases in plant biomass, height, and internode length. The Crioula cultivar had a satisfactory phytoremediation effect, reducing total PAH concentration (300 ppm) in the experimental soil by 85% in 20 days, and by more than 95% in 40 days. The PAH showed a tendency to be removed in the temporal order: phenanthrene before pyrene before anthracene, and the removal ratio was influenced by the initial soil concentration of each PAH.

  3. Improvement of west Sumatra black rice cultivar through mutation induction

    International Nuclear Information System (INIS)

    Benny Warman; Sobrizal; Irfan Suliansyah; Etti Swasti; Auzar Syarif

    2015-01-01

    Black rice cultivar is a local rice cultivar originating from East Pasaman, West Sumatera which has black endosperm, long growth duration and high plant height. The research was conducted from March 2012 until March 2013 with the objective of improvement the genetic of this black rice cultivar, especially related to the growth duration through mutation breeding. To get the optimum dose, the seeds of this cultivar were irradiated by gamma ray with doses of 0, 100, 200, 300, 400 and 500 Gy, respectively at Center of the Application of Isotopes and Radiation, National Nuclear Energy Agency (PAIR - BATAN), Jakarta. Base don the data of percentage of germination, plant height and root length in the seedling stage, and the percentage of grain sterility in M1 plants, it was obtained that the dose of 200-300 Gy is an effective dose in generating genetic diversity. It was agree with result of variability observations in M2 population derived from 200 Gy irradiated seeds, in which the extensive genetic diversities were observed in the variable of plant height, number of productive tillers and growth duration. From the selection in M2 population it was obtained 81 early maturing plants, with mutant frequency of 0.08 %. These selected early maturing mutants are very useful as initial plant materials in developing black rice leading mutant variety(s) in the future. (author)

  4. The effect of silage cutting height on the nutritive value of a normal corn silage hybrid compared with brown midrib corn silage fed to lactating cows.

    Science.gov (United States)

    Kung, L; Moulder, B M; Mulrooney, C M; Teller, R S; Schmidt, R J

    2008-04-01

    A brown midrib (BMR) hybrid and a silage-specific non-BMR (7511FQ) hybrid were harvested at a normal cut height leaving 10 to 15 cm of stalk in the field. The non-BMR hybrid was also cut at a greater height leaving 45 to 50 cm of stalk. Cutting high increased the concentrations of dry matter (+4%), crude protein (+5%), net energy for lactation (+3%), and starch (+7%), but decreased the concentrations of acid detergent fiber (-9%), neutral detergent fiber (-8%), and acid detergent lignin (-13%) for 7511FQ. As expected, the BMR corn silage was 30% lower in lignin concentration than 7511FQ. After 30 h of in vitro ruminal fermentation, the digestibility of neutral detergent fiber for normal cut 7511FQ, the same hybrid cut high, and the normal cut BMR hybrid were 51.7, 51.4, and 63.5%, respectively. Twenty-seven multiparous lactating cows were fed a total mixed ration composed of the respective silages (45% of dry matter) with alfalfa haylage (5%), alfalfa hay (5%), and concentrate (45%) (to make the TMR isocaloric and isonitrogenous) in a study with a 3 x 3 Latin square design with 21-d periods. Milk production was greater for cows fed the BMR hybrid (48.8 kg/d) compared with those fed the normal cut 7511FQ (46.8 kg/d) or cut high (47.7 kg/d). Dry matter intake was not affected by treatment. Feed efficiency for cows fed the BMR silage (1.83) was greater than for those fed high-cut 7511FQ (1.75), but was not different from cows fed the normal cut 7511FQ (1.77). Cows fed the BMR silage had milk with greater concentrations of lactose but lower milk urea nitrogen than cows on other treatments. Harvesting a silage-specific, non-BMR corn hybrid at a high harvest height improved its nutritive content, but the improvement in feeding value was not equivalent to that found when cows were fed BMR corn silage.

  5. LC-MS Untargeted Metabolomics To Explain the Signal Metabolites Inducing Browning in Fresh-Cut Lettuce.

    Science.gov (United States)

    García, Carlos J; García-Villalba, Rocío; Gil, María I; Tomas-Barberan, Francisco A

    2017-06-07

    Enzymatic browning is one of the main causes of quality loss in lettuce as a prepared and ready-to-eat cut salad. An untargeted metabolomics approach using UPLC-ESI-QTOF-MS was performed to explain the wound response of lettuce after cutting and to identify the metabolites responsible of browning. Two cultivars of Romaine lettuce with different browning susceptibilities were studied at short time intervals after cutting. From the total 5975 entities obtained from the raw data after alignment, filtration reduced the number of features to 2959, and the statistical analysis found that only 1132 entities were significantly different. Principal component analysis (PCA) clearly showed that these samples grouped according to cultivar and time after cutting. From those, only 15 metabolites belonging to lysophospholipids, oxylipin/jasmonate metabolites, and phenolic compounds were able to explain the browning process. These selected metabolites showed different trends after cutting; some decreased rapidly, others increased but decreased thereafter, whereas others increased during the whole period of storage. In general, the fast-browning cultivar showed a faster wound response and a higher raw intensity of some key metabolites than the slow-browning one. Just after cutting, the fast-browning cultivar contained 11 of the 15 browning-associated metabolites, whereas the slow-browning cultivar only had 5 of them. These metabolites could be used as biomarkers in breeding programs for the selection of lettuce cultivars with lower browning potential for fresh-cut applications.

  6. Induction of somatic mutation in chrysanthemum cultivar 'Anupam'

    International Nuclear Information System (INIS)

    Banerji, B.K.; Datta, S.K.

    1990-01-01

    Rooted cuttings of chrysanthemum cv. 'Anupam' were irradiated with 1.5, 2.0 and 2.5 Krad of gamma rays. Significant reduction in survival, plant height, branch, leaf and flower head number and leaf size were recorded after irradiation. Radio sensitivity was determined on the basis of different cytomorphological parameters. Different types of morphological abnormalities in leaves and flower and chromosomal abnormalities during root tip mitosis were observed and the total abnormalities increased with increase in exposure to gamma rays. Significant delay in flower bud initiation, first colour showing and full bloom were recorded in the treated population. Somatic mutations in flower colour could be induced in vM 1 as chimera and a total of three flower colour mutant, i.e., lighter, white and striped were isolated and established in pure form as new cultivars which are of direct use for floriculture industry. (author). 17 refs., 6 figs. , 2 tabs

  7. Evaluation of diversity in Bulgarian pepper cultivars by agronomical traits and ISSR markers

    Directory of Open Access Journals (Sweden)

    Tsonev Stefan

    2017-01-01

    Full Text Available Information about the genetic variation among cultivars of vegetable crops is of vital importance for improvement of plant breeding programmes worldwide. The objectives of this study were to group 19 pepper (Capsicum annuum L. cultivars from the collection of Maritsa Vegetable Crops Research Institute, Plovdiv, Bulgariainto clusters according to their distances as estimated by agronomic traits and 9 di-and tri -nucleotide inter simple sequence repeat polymorphism (ISSR markers and to assess the relationships between them. The phenotypic characterization during 3 consecutive years revealed significant differences among Bulgarian cultivars for the studied 13 phenotypic traits. The biplot analysis of quantitative traits showed that the most strongly correlating traits with the first axis (55.6% of variance were fruit width, fruit weight and pericarp thickness (in the negative direction of the axis, and plant height (PH (in the positive direction. The most discriminative traits, considering the second axis (22.6% of variance were fruit length (FL and to a lesser extent the stem height (StH. The correspondence analysis of the qualitative traits showed that the intensity of the colour of the fruit (before and at maturity, fruit colourbefore maturity and fruit shape in longitudinal section were the most discriminative characteristics for the first two dimensions. The agronomic traits data and 7 dinucleotide ISSR primers were used to estimate the pairwise genetic distances. Higher mean phenotypic distance (0.414 in comparison to the genotypic ones (0.214 among the cultivars was observed, indicating higher phenotypic diversity among them. A highly significant, positive correlation between the agronomic data and ISSR marker-based matrices (r=0.41, p=0.001was detected. This indicates that ISSR distance tended to reflect that of the agronomics ones. However, additional molecular studies and large collection of highly diverse genotypes are needed to reveal

  8. Quantitative and microscopic assessment of compatible and incompatible interactions between chickpea cultivars and Fusarium oxysporum f. sp. ciceris races.

    Science.gov (United States)

    Jiménez-Fernández, Daniel; Landa, Blanca B; Kang, Seogchan; Jiménez-Díaz, Rafael M; Navas-Cortés, Juan A

    2013-01-01

    Fusarium wilt caused by Fusarium oxysporum f. sp. ciceris, a main threat to global chickpea production, is managed mainly by resistant cultivars whose efficiency is curtailed by Fusarium oxysporum f. sp. ciceris races. We characterized compatible and incompatible interactions by assessing the spatial-temporal pattern of infection and colonization of chickpea cvs. P-2245, JG-62 and WR-315 by Fusarium oxysporum f. sp. ciceris races 0 and 5 labeled with ZsGreen fluorescent protein using confocal laser scanning microscopy. The two races colonized the host root surface in both interactions with preferential colonization of the root apex and subapical root zone. In compatible interactions, the pathogen grew intercellularly in the root cortex, reached the xylem, and progressed upwards in the stem xylem, being the rate and intensity of stem colonization directly related with the degree of compatibility among Fusarium oxysporum f. sp. ciceris races and chickpea cultivars. In incompatible interactions, race 0 invaded and colonized 'JG-62' xylem vessels of root and stem but in 'WR-315', it remained in the intercellular spaces of the root cortex failing to reach the xylem, whereas race 5 progressed up to the hypocotyl. However, all incompatible interactions were asymptomatic. The differential patterns of colonization of chickpea cultivars by Fusarium oxysporum f. sp. ciceris races may be related to the operation of multiple resistance mechanisms.

  9. Quantitative and microscopic assessment of compatible and incompatible interactions between chickpea cultivars and Fusarium oxysporum f. sp. ciceris races.

    Directory of Open Access Journals (Sweden)

    Daniel Jiménez-Fernández

    Full Text Available BACKGROUND: Fusarium wilt caused by Fusarium oxysporum f. sp. ciceris, a main threat to global chickpea production, is managed mainly by resistant cultivars whose efficiency is curtailed by Fusarium oxysporum f. sp. ciceris races. METHODOLOGY: We characterized compatible and incompatible interactions by assessing the spatial-temporal pattern of infection and colonization of chickpea cvs. P-2245, JG-62 and WR-315 by Fusarium oxysporum f. sp. ciceris races 0 and 5 labeled with ZsGreen fluorescent protein using confocal laser scanning microscopy. FINDINGS: The two races colonized the host root surface in both interactions with preferential colonization of the root apex and subapical root zone. In compatible interactions, the pathogen grew intercellularly in the root cortex, reached the xylem, and progressed upwards in the stem xylem, being the rate and intensity of stem colonization directly related with the degree of compatibility among Fusarium oxysporum f. sp. ciceris races and chickpea cultivars. In incompatible interactions, race 0 invaded and colonized 'JG-62' xylem vessels of root and stem but in 'WR-315', it remained in the intercellular spaces of the root cortex failing to reach the xylem, whereas race 5 progressed up to the hypocotyl. However, all incompatible interactions were asymptomatic. CONCLUSIONS: The differential patterns of colonization of chickpea cultivars by Fusarium oxysporum f. sp. ciceris races may be related to the operation of multiple resistance mechanisms.

  10. Salinity-induced modulation of plant growth and photosynthetic parameters in faba bean (vicia faba) cultivars

    International Nuclear Information System (INIS)

    Hussein, M.; Embiale, A.; Husen, A.; Eref, I.E.

    2017-01-01

    Salinity is one of the most severe environmental factors limiting the productivity of agricultural crops. The present study assesses salt-tolerant cultivars of Vicia faba L.on the basis of their growth, biomass and foliar characteristics. Four levels of salt stress (0, 50, 100 and 150mM) were applied to three selected cultivars, viz. Degaga, Dosha and Hachalu. Results revealed significant differences among the cultivars, salt-stress treatments, and their interaction, indicating the cultivars' variability and differential response to salt stress. Salinity stress adversely affected plant growth, plant water status and biomass production. Salt treatments decreased the chlorophyll a and chlorophyll b contents, but cultivar Dosha, which was ahead of others in height, leaf number, relative water content, total biomass and leaf-dry-mass ratio, was least affected. Functional leaf characters, such as photochemical efficiency of PSII (maximum quantum yield = Fv/Fm), stomatal conductance (gs), net photosynthetic rate (Pn) and transpiration rate (E) were also reduced under salt-stress, and againDosha cultivar did better than others except in gs. The relatively less decline in growth, water status, biomass, photosynthetic pigments and functional leaf characters of Dosha exhibits a reasonable tolerance ability of this cultivar, while the other two varieties viz., Degaga and Hachalu proved to be sensitive to salt stress. (author)

  11. Propagação vegetativa de abacateiro por estaquia Vegetative propagation of avocado, by stem cuttings

    Directory of Open Access Journals (Sweden)

    Samar Velho da Silveira

    2004-04-01

    Full Text Available Visando a propagar vegetativamente o abacateiro (Persea sp. por meio de estacas, estiolaram-se ramos em mudas das cultivares Ouro Verde e Baronesa. Após a obtenção destas mudas por garfagem de fenda cheia, podou-se a parte aérea das mesmas 10 cm acima do ponto de enxertia. Metade das mudas foi colocada em câmara escura, coberta com polietileno preto, visando a forçar brotação estiolada, enquanto a outra metade foi posta a brotar em casa de vegetação, anelando-se a base de todos os ramos estiolados e não estiolados. Um mês após a poda das mudas, confeccionaram-se estacas, tanto de ramos estiolados quanto de não estiolados, com 20cm de comprimento e quatro folhas maduras, que foram tratadas com solução de 2000 mg L-1 de ácido indolbutírico (AIB, durante 10 segundos e colocadas, individualmente, em vasos plásticos pretos de 500 ml, contendo casca de arroz carbonizada como substrato. Após dois meses, estas foram repicadas para sacos de polietileno com capacidade para cinco litros. No momento do transplante, a taxa de enraizamento das estacas estioladas e não estioladas foi de 62,5% e 12,5%, respectivamente, para a cultivar Ouro Verde. A cultivar Baronesa não enraizou em nenhum caso. Após o transplante, as percentagens de enraizamento mantiveram-se as mesmas para a cultivar Ouro Verde, aumentando, contudo, o número de raízes por estaca. Já, para a cultivar Baronesa, as estacas não estioladas passaram a apresentar 12,5% de enraizamento, enquanto as estioladas continuaram com 0%.With the objetive to propagate avocados vegetatively by means of stem cuttings, branches of cultivars Ouro Verde and Baronesa were forced to etiolate. Grafted avocado plants were prunned 10 cm above of the grafting point. Half of those plants were covered with black polyethylene and placed in a darkroom. The other half of those plants were transfered to a greenhouse. The branches formed were girdled at the base. One month after the plants had been

  12. Evaluation of growth and flowering potential of rosa hybrida cultivars under Faisalabad climatic conditions

    International Nuclear Information System (INIS)

    Nadeem, M.; Khan, M.A.; Riaz, A.

    2011-01-01

    Exotic cultivars of hybrid roses respond uncertainly to new habitat. It is necessary to explore the potential of the introduced cultivars to judge the suitability in a new habitat. In the present study, nine Rosa hybrida cultivars including Autumn Sunset, Ice Berg, Paradise, Angel Face, Louise Odier, Casino, Grand Margina, Handel and Gruss-an-Teplitz were evaluated for growth and yield attributed under the climatic conditions of Faisalabad. Results indicated that there was decreasing trend in the growth and flowering of the bushes as the temperature increased above 32 degree C and humidity decreased to 29 %. Number of flowers per bush and diameter of flower decreased as the temperature increased and humidity decreased in contrast to increment in height of the plant and num ber of primary branches per plant in succeeding months. Interaction between yield traits and months was also significant. Overall, significant variations were observed in each cultivar for length and number of petals per flower, number of prickles, fragrance, flower persistence life and color, bush shape and overall performance with respect to climatic conditions of Faisalabad. It is concluded that the cultivars 'Autumn Sunset' and Gruss-an-Teplitz performed better in climatic conditions of Faisalabad. (author)

  13. Cytomorphological characterization of tea cultivars

    International Nuclear Information System (INIS)

    Rahman, H.; Khalil, I.H.; Shah, S.M.A.; Khanzada, T.Z.; Abbasi, F.M; Ahmad, H.; Shah, Z.

    2010-01-01

    Cytomorphological characterization was performed on tea cultivars, three each of Camellia sinensis and Camellia assamica species. For plant morphological study, one and a half year old healthy shoots were obtained from the selected mother bushes of the six tea cultivars. The field experiment conducted in randomized complete block design having four replications was aimed at evaluating plant height, number of leaves plant-l, number of branches plant-l, number of flowers plant-1, fresh and dry leaf weight plant-I. The data indicated significant difference between the two species with narrow leaved cultivars having increased plant height, number of leaves and branches plant-I than the broad leaved cultivars, but less number of flowers plant-l, fresh and dry leaf weight. Karyotype analysis indicated that both the groups are diploid with 2n = 30. On the basis of chromosome morphology, C. assamica had larger chromosomes (3-10.5 mu m) as compared to C. sinensis (3.9-8 mu m). C. assamica has relatively advanced features as compared to C. sinensis. However, both the groups possessed mostly median to sub-median centromeres with no secondary constrictions which possibly indicates that little or no evolutionary changes have taken place in tea and that the karyotype is still at a primitive stage, with C. sinensis being more primitive than C. assamica. Our results suggest that both the groups are different from each other in morphological as well as cytological attributes and could therefore generate more germplasm if the two species could be involved in tea breeding programs. (author)

  14. AMMI model in the analysis of genotype by environment interaction of conventionally and organically grown onion

    Directory of Open Access Journals (Sweden)

    Brdar-Jokanović Milka

    2016-01-01

    Full Text Available This study was aimed to assess the stability of direct yield components (bulb weight and number plot-1 and other yield contributing characteristics (bulb diameter, height and index, neck diameter and length, plant height, emergence and vegetation period in five commercial onion cultivars grown in conventional and organic environments, by employing additive main effect and multiplicative interaction (AMMI statistical model in data analysis. The two-year field trial organized in complete randomized blocks included the plots maintained in four regimes: mineral fertilization (conventional, without fertilization, fertilization with farmyard manure and with bacterial fertilizer (organic. Each treatment by year combination was considered as an environment. Analysis of variance of AMMI model calculated for the investigated traits showed that all sources of variation (genotypes, environments, genotype by environment interaction were highly significant. The largest proportions of the total sum of squares were encompassed by environments, except for emergence and bulb index with the pronounced effect of genotypes (67.26 and 52.54%, respectively and neck length with the genotype by environment interaction amounting 44.59%. Generally, the effects of the interactions were in the common range. The AMMI model with two axes was concluded as the best model for the investigated traits. Onions grown in conventional system outperformed the organic ones. However, good performance of the genotypes was accompanied with low stability across the environments and vice versa. Therefore breeding programs intended to develop cultivars adapted to alternative production systems should rely on the experiments set in the corresponding environments that include various combinations of genotypes and agro-technical procedures based on the principles of organic agriculture. [Projekat Ministarstva nauke Republike Srbije, br. TR 31059

  15. Alternative rooting induction of semi-hardwood olive cuttings by several auxin-producing bacteria for organic agriculture systems

    Directory of Open Access Journals (Sweden)

    M. C. Montero-Calasanz

    2013-01-01

    Full Text Available Southern Spain is the largest olive oil producer region in the world. In recent years organic agriculture systems have grown exponentially so that new alternative systems to produce organic olive cuttings are needed. Several bacterial isolates, namely Pantoea sp. AG9, Chryseobacterium sp. AG13, Chryseobacterium sp. CT348, Pseudomonas sp. CT364 and Azospirillum brasilense Cd (ATCC 29729, have been used to induce rooting in olive semi-hardwood cuttings of Arbequina, Hojiblanca and Picual cultivars of olive (Olea europea L. The first four strains were previously selected as auxin-producing bacteria and by their ability to promote rooting in model plants. They have been classified on the basis of their 16S rDNA gene sequence. The known auxin producer A. brasilense Cd strain has been used as a reference. The inoculation of olive cuttings was performed in two different ways: (i by dipping cuttings in a liquid bacterial culture or (ii by immersing them in a paste made of solid bacterial inoculant and sterile water. Under nursery conditions all of the tested bacterial strains were able to induce the rooting of olive cuttings to a similar or greater extent than the control cuttings treated with indole-3-butyric acid (IBA. The olive cultivars responded differently depending on the bacterial strain and the inoculation method. The strain that consistently gave the best results was Pantoea sp. AG9, the only one of the tested bacterial strains to express the enzyme 1-aminocyclopropane-1-carboxylate (ACC deaminase. The results are also discussed in terms of potential commercial interest and nursery feasibility performance of these strains.

  16. Abordagem Bayesiana das curvas de crescimento de duas cultivares de feijoeiro Bayesian approach in the growth curves of two cultivars of common bean

    Directory of Open Access Journals (Sweden)

    Sebastião Martins Filho

    2008-09-01

    Full Text Available Neste trabalho foi utilizada a metodologia Bayesiana para ajustar o modelo não-linear logístico para dados de crescimento de duas cultivares de feijoeiro, "Neguinho" e "Carioca". O delineamento experimental utilizado foi o inteiramente casualizado, com vinte repetições, no esquema de parcelas subdivididas, sendo que os tratamentos principais foram constituídos pelas cultivares e as subparcelas foram constituídas por 17 períodos de avaliações, do plantio até aos 85 dias. A metodologia permitiu comparar as curvas de crescimentos sem utilizar a teoria assintótica e estes resultados mostraram um maior incremento em altura para a cultivar "Carioca".In this paper the Bayesian methodology was used to fit the logistic nonlinear model to growth data of two common bean cultivars, 'Neguinho' and 'Carioca'. The experiment was a split plot under a completely randomized design with twenty replicates, being the main treatments constituted by cultivars and the sub plots constituted by seventeen periods of evaluations, from planting to 85 days. The methodology allowed comparing the growth curves without using the asymptotic theory, and these results showed a larger height increment for the 'Carioca' cultivar.

  17. Amplifying the benefits of agroecology by using the right cultivars.

    Science.gov (United States)

    Noguera, D; Laossi, K-R; Lavelle, P; De Carvalho, M H Cruz; Asakawa, N; Botero, C; Barot, S

    2011-10-01

    Tropical soils are particularly vulnerable to fertility losses due to their low capacity to retain organic matter and mineral nutrients. This urges the development of new agricultural practices to manage mineral nutrients and organic matter in a more sustainable way while relying less on fertilizer inputs. Two methods pertaining to ecological engineering and agroecology have been tested with some success: (1) the addition of biochar to the soil, and (2) the maintenance of higher earthworm densities. However, modern crop varieties have been selected to be adapted to agricultural practices and to the soil conditions they lead to and common cultivars might not be adapted to new practices. Using rice as a model plant, we compared the responsiveness to biochar and earthworms of five rice cultivars with contrasted selection histories. These cultivars had contrasted responsivenesses to earthworms, biochar, and the combination of both. The mean relative increase in grain biomass, among all treatments and cultivars, was 94% and 32%, respectively, with and without fertilization. Choosing the best combination of cultivar and treatment led to a more than fourfold increase in this mean benefit (a 437% and a 353% relative increase in grain biomass, respectively, with and without fertilization). Besides, the more rustic cultivar, a local landrace adapted to diverse and difficult conditions, responded the best to earthworms in terms of total biomass, while a modern common cultivar responded the best in term of grain biomass. This suggests that cultivars could be selected to amplify the benefit of biochar- and earthworm-based practices. Overall, selecting new cultivars interacting more closely with soil organisms and soil heterogeneity could increase agriculture sustainability, fostering the positive feedback loop between soils and plants that has evolved in natural ecosystems.

  18. Elegant lady a pink longiflorum lily cultivar suitable for cut flower forcing

    NARCIS (Netherlands)

    Lim Ki-Byung,; Tuyl, van J.M.

    2004-01-01

    A new pink longiflorum (Lilium longiflorum x (L. longiforum x L. rubellum)) lily cultivar was obtained by integrated intersectional hybridization techniques. The F1 intersectional hybrid was obtained by crossing between L. longiflorum 'Gelria' and wild type L. rubellum. Since the F1 hybrid was

  19. Resposta de cultivares de algodoeiro a subdoses de glyphosate Response of cotton cultivars to reduced rates of glyphosate

    Directory of Open Access Journals (Sweden)

    O.M. Yamashita

    2005-12-01

    , BRS Facual, Antares and Coodetec 407. The plants were cultivated in plastic pots filled with soil substratum and kept under greenhouse conditions. Glyphosate application was performed 20 days post emergence, at which time they presented four true leaves. Reduced rates of glyphosate, simulating drift, ranged from 270 and 540 g. A control was also used, without herbicide application to compare the effects. Weekly evaluations were accomplished up to 42 days after application (DAA. During this period, plant height was also measured. Visual symptoms began 3 DAA, with the appearance of yellow spots at the tips of the youngest leaves, followed by withering at the apex of the plants. At the rate of 270 g ha-1, these symptoms showed low intensity but at the rate of 540 g ha-1 the symptoms caused "worrisome" to "very high'' toxicity, in most of the cases. BRS Facual and FM 986 were the most susceptible. Plant height was the most affected when the lowest glyphosate dose was applied. All cultivars treated with 270 g ha-1 glyphosate rate until 42 DAA were recovered. Fabrika, Coodetec 407, BRS Facual and ITA-90 cultivars, when treated with 540 g ha-1 glyphosate were more sensitive, presenting a height reduction between 84 and 90% 42 DAA. The less sensitive cultivars at the rate of 270 g ha-1 glyphosate were not the same at the 540 g ha-1 rate.

  20. Interactions in the Agrobacterium-soybean system and capability of some Brazilian soybean cultivars to produce somatic embryos

    Directory of Open Access Journals (Sweden)

    Mauro Antonio Orlando Di

    2000-01-01

    Full Text Available Twenty-five Brazilian soybean cultivars were studied for susceptibility to four strains of Agrobacterium tumefaciens (C58, Ach5, Bo542 and A281 and for their ability to produce somatic embryos. Twelve plants of each cultivar were inoculated in a greenhouse at 4-6 weeks of age, using 12 inoculation sites per plant. The number of galls formed on plants were counted 8-10 weeks after inoculation. To study ability to produce somatic embryos, immature cotyledons, 4-6 mm in length, were plated onto N10 medium for induction of somatic embryogenesis, using four Petri dishes with 20 cotyledons for each cultivar. The embryogenic tissues were transferred onto new N10 medium six times at 15-day intervals and the number of somatic embryos per cultivar determined. Significant interaction between soybean cultivars and A. tumefaciens strains was observed; the most virulent strain was A281. The opine type apparently had no effect on strain virulence, and the most embryogenic cultivars were IAS-5, Cristalina, FT-Cometa, IAC-7 and OC-3.

  1. Resposta de cultivares de milho a zinco em solução nutritiva Corn cultivar responses to zinc in nutrient solution

    Directory of Open Access Journals (Sweden)

    Angela Maria Cangiani Furlani

    1996-01-01

    nutrient solution with two zinc levels (0.125 and 0.350 mg Zn/ L, during 30 days, in a randomized complete block design, arranged in a split-plot, with two replications and four plants/ cultivar/ plot. Plant height, top dry matter yield, top Zn concentration and content were the traits scored. Low Zn treatment gave rise to reduced dry matter yields and plant heights, as well as to low top Zn concentrations and contents. The cultivars D-468, ICI-791152 and C-701 were the best in the low zinc level. By the other hand, the cultivars C-808, Hatã-2000, OC-5045-6 and BR-201 were more responsive to the high Zn level. High and positive correlation (r = 0,86 was estimated between plant height and top zinc content, which might be useful in future selection schemes. However, more research is needed to quantify, with higher precision, genotype differences in zinc demands.

  2. Wake interaction and power production of variable height model wind farms

    International Nuclear Information System (INIS)

    Vested, M H; Sørensen, J N; Hamilton, N; Cal, R B

    2014-01-01

    Understanding wake dynamics is an ongoing research topic in wind energy, since wakes have considerable effects on the power production when wind turbines are placed in a wind farm. Wind tunnel experiments have been conducted to study the wake to wake interaction in a model wind farm in tandem with measurements of the extracted power. The aim is to investigate how alternating mast height influences the interaction of the wakes and the power production. Via the use of stereo-particle image velocimetry, the flow field was obtained in the first and last rows of the wind turbine array as a basis of comparison. It was found that downstream of the exit row wind turbine, the power was increased by 25% in the case of a staggered height configuration. This is partly due to the fact that the taller turbines reach into a flow area with a softened velocity gradient. Another aspect is that the wake downstream of a tall wind turbine to some extent passes above the standard height wind turbine. Overall the experiments show that the velocity field downstream of the exit row changes considerably when the mast height is alternating

  3. Desenvolvimento e produção de duas cultivares de mamoneira sob estresse salino Growth and production of two cultivars of castor bean under saline stress

    Directory of Open Access Journals (Sweden)

    Sérvulo M. S. Silva

    2008-08-01

    Full Text Available Visando estudar o comportamento de duas cultivares BRS Paraguaçu e BRS Energia de mamoneira (Ricinus communis L., irrigadas com quatro níveis de condutividade elétrica da água de irrigação (CEa: 0,7; 2,7; 4,7 e 6,7 dS m-1, a 25 °C, conduziu-se um experimento no delineamento inteiramente casualizado, com 3 repetições, em esquema fatorial 4 x 2. As variáveis avaliadas foram altura de planta, diâmetro de caule, número de folhas, área foliar e consumo diário de água pela planta aos 80 e 100 dias após semeadura, número de dias para 1ª inflorescência, altura do 1º racemo aos 100 dias após semeadura, dias para colheita, número de frutos no 1º cacho, peso dos frutos, das sementes e de 10 sementes aos 150 DAS. A salinidade da água de irrigação interferiu na altura de planta, diâmetro do caule, número de folhas, área foliar e consumo de água, a partir de 4,7 dS m-1 aos 80 e 100 DAS, nas duas cultivares. Verificou-se, na cultivar BRS Energia maior precocidade na emissão da 1ª inflorescência e maior altura do racemo, enquanto na cultivar BRS Paraguaçu se obteve menor produção de frutos e de sementes e maior peso de 10 sementes.With the objective of studying the behavior of two cultivars BRS Paraguaçu and BRS Energy of castor bean (Ricinus communis L., irrigated with four levels of electrical conductivity of irrigation water (ECw: 0.7; 2.7; 4.7 and 6.7 dS m-1, at 25 °C, an experiment was conducted in a randomized design with 3 replications, in a factorial scheme of 4 x 2. The variables measured were: plant height, stem diameter, leaf area, number of leaves and water consumption by plant at 80 and 100 days after sowing (DAS, number of days for emission of first inflorence and height of first cluster at 100 DAS, days to harvest, number of fruits in the 1st cluster, weight of fruits, and 10 seeds at 150 DAS. The salinity of the irrigation water significantly affected the plant height, stem diameter, number of leaves, leaf

  4. Interação genótipo x ambiente em cultivares de alface na região de Jaboticabal Interaction genotype x environment of lettuce cultivars in Jaboticabal, Brazil

    Directory of Open Access Journals (Sweden)

    Eduardo B. de Figueiredo

    2004-03-01

    Full Text Available Estudou-se a interação genótipo x ambiente de doze cultivares de alface, sendo quatro do grupo lisa (Babá de Verão, Karla, Nacional e Elisa, quatro do grupo crespa (Simpson, Hortência, Verônica e Grand Rapids e quatro do grupo americana (Laidy, Tainá, Lucy Brown e Raider. Os tratamentos foram constituídos pelo cultivo da alface em dez ambientes (casa de vegetação, túnel baixo de cultivo, túnel baixo com sombrite, agrotêxtil e campo, na presença e ausência de mulching. Foram utilizados dois períodos de cultivo, agosto a novembro de 2001 e março a junho de 2002 em Jaboticabal. Cada experimento (ambiente de cultivo foi conduzido utilizando-se o delineamento de blocos casualizados, com doze cultivares e três repetições. A análise de variância conjunta demonstrou valores de F significativos (pWe evaluated the interaction genotype x environment of twelve genotypes of lettuce (Babá de Verão, Karla, Nacional, Elisa, Simpson, Hortência, Verônica, Grand Rapids, Laidy, Tainá, Lucy Brown and Raider, cultivated under greenhouse, low tunnel, low tunnel covered with black plastic screen, floating row cover (light-weight woven and open field. All these treatments were conducted with and without mulching with ten treatments in total. The experiments were conducted in two different periods (August to November, 2001 and March to June, 2002. Each experiment (growth environment was conducted using randomized blocks and three replicates. The measured variables were dry matter, volume and number of leaves. The value of F was significant (p<0,01 for the interaction genotype x environment. For the planting period from August to November/2001, the best results were obtained with the butterhead cultivars (Babá de Verão, Karla, Nacional, Elisa, cultivated under greenhouse with mulching, low tunnel without mulching and field without mulching. All cultivars had the worst performance when cultivated under tunnel with black plastic screen with or

  5. Modelling Visual Quality of Kalanchoe Blossfeldiana: Influence of Cultivar and Pot Size

    NARCIS (Netherlands)

    Carvalho, S.M.P.; Almeida, J.; Eveleens-Clark, B.A.; Bakker, M.J.; Heuvelink, E.

    2008-01-01

    An explanatory model for predicting kalanchoe plant height and cropping duration has been developed for one cultivar and one pot size, as described in earlier papers. In two experiments (winter and summer) seven contrasting cultivars (`Anatole¿, `Debbie¿, `Delia¿, `Mie¿, `Pandora¿, `Tenorio¿ and

  6. Desidratação de cultivares de Cynodon spp. durante o processo de fenação Dehydration of Cynodon grass cultivars during haymaking

    Directory of Open Access Journals (Sweden)

    Geane Dias Gonçalves

    2001-05-01

    Full Text Available O experimento teve por objetivo avaliar a desidratação de cultivares de Cynodon spp. (Poaceae durante o processo de fenação. Foram realizadas amostragens nos tempos zero (momento do corte, 3, 6, 21, 24, 27 e 30 horas após o corte, a fim de se determinar a curva de desidratação e os teores de proteína bruta (PB da planta inteira e das frações folhas e colmos. Determinou-se também a espessura dos colmos de cada cultivar. Utilizou-se o delineamento experimental em blocos completamente casualizados em esquema fatorial 3x7 (cultivares x tempos de amostragens, com três repetições. A velocidade de perda de água foi semelhante para os cultivares avaliados, tanto para a planta como para as frações colmos e folhas. Não houve efeito para os teores de PB com o avanço nos tempos de secagem. Porém, houve diferença para a relação L/C, onde o Tifton 85 apresentou maior valor. Já para o diâmetro do colmo, o Tifton 44 foi superior em relação aos demais cultivares.Dehydration of cultivars of the genus Cynodon (Poaceae and the possible variations of chemical composition of forages during the haymaking process were evaluated. Three cultivars of Cynodon, Tifton 85, Coast cross and Tifton 44 were used, in plots of 15 m2, with three randomized blocks. Samples at 0 (cutting time, 3, 6, 21, 24, 27 and 30 hours after cutting were taken to determine the dehydration curve of whole plant, leaves and stem. Speed in water loss in plant, leaves and stem segments was similar in all cultivars. Drying did not affect CP taxes. There was, however, a difference for the leaves/stem relationship in which Tifton 85 had the highest value. Tifton 44 was higher in the other cultivars with regard to stem diameter.

  7. Partial incompatibility between ants and symbiotic fungi in two sympatric species of Acromyrmex leaf-cutting ants.

    Science.gov (United States)

    Bot, A N; Rehner, S A; Boomsma, J J

    2001-10-01

    We investigate the nature and duration of incompatibility between certain combinations of Acromyrmex leaf-cutting ants and symbiotic fungi, taken from sympatric colonies of the same or a related species. Ant-fungus incompatibility appeared to be largely independent of the ant species involved, but could be explained partly by genetic differences among the fungus cultivars. Following current theoretical considerations, we develop a hypothesis, originally proposed by S. A. Frank, that the observed incompatibilities are ultimately due to competitive interactions between genetically different fungal lineages, and we predict that the ants should have evolved mechanisms to prevent such competition between cultivars within a single garden. This requires that the ants are able to recognize unfamiliar fungi, and we show that this is indeed the case. Amplified fragment length polymorphism genotyping further shows that the two sympatric Acromyrmex species share each other's major lineages of cultivar, confirming that horizontal transfer does occasionally take place. We argue and provide some evidence that chemical substances produced by the fungus garden may mediate recognition of alien fungi by the ants. We show that incompatibility between ants and transplanted, genetically different cultivars is indeed due to active killing of the novel cultivar by the ants. This incompatibility disappears when ants are force-fed the novel cultivar for about a week, a result that is consistent with our hypothesis of recognition induced by the resident fungus and eventual replacement of incompatibility compounds during force-feeding.

  8. Effect of Arbuscular Mycorrhizal Fungi and Organic Fertilizers Application on Yield Components of Two Wheat Cultivars

    Directory of Open Access Journals (Sweden)

    A. Gholamalizadeh Ahangar

    2014-12-01

    Full Text Available This investigation was conducted in order to evaluate the direct effects of organic and bio - fertilizers on yield components of two native wheat cultivars, Bolani and cross - Bolani. The experiment conducted as a factorial in a completely randomized design with three replications. Treatment includes fertilizer factor: vermicompost (F1, vermicompost + compost (F2, vermicompost + mycorrhiza (F3, compost + vermicompost + mycorrhiza (F4, compost (F5, mycorrhiza + compost (F6, mycorrhiza (F7 and control (no fertilizer application F8 and cultivar factor includes two cultivar Bolani (C1 and cross - Bolani (C2. The results showed that the interaction effect of combined treatments (F7C2 of high yield (1.13 g.pot-1 obtained. The treatment combination (F7C2 of (0.355 was highest harvest index. The high correlation between weight per plant with plant height, spike length, grain yield and harvest index were observed. Generally the combined application of vermicompost and mycorrhiza cultivar cross - Bolani is more suitable for grain production.

  9. The results of cutting disks testing for rock destruction

    Directory of Open Access Journals (Sweden)

    Khoreshok Aleksey

    2017-01-01

    Full Text Available To determine the rational order of disk tools placement on the working body is necessary to know the maximum amount of rock, destroyed by the disk tool in benching cutting mode depending on the tool geometry parameters, physical and mechanical parameters of rocks. The article contains the definition of rational parameters of cutting disk tools as well as power and energy parameters of the destruction process by cutting disks and by executive body of the coal cutter. The rational geometric parameters of cutting discs are specified. It was found that each step of cutting with a minimum depth of penetration has its own maximum height of bench outcrop. The dependence of the volumes of large items destroyed by the disk tool on the cutting step height was determined. The existence of the cyclic alternation of destruction phases, regardless the fracture parameters, the height of the ledge outcrop, and tools like free cutting geometry were found. In contrast to the free cutting in benching mode of destruction two large fragments of rocks in one cycle were observed. Consequently, the cyclical nature of the destruction process in the benching mode will be characterized by two chips and crushing, and this cycling repeats throughout the destruction process with the same parameters of destruction.

  10. Desenvolvimento e produção de duas cultivares de cebola irrigadas por gotejamento Development and production of two onion cultivars irrigated by drip system

    Directory of Open Access Journals (Sweden)

    Renato C. Vilas Boas

    2012-07-01

    Full Text Available Objetivou-se, com este trabalho, avaliar o efeito de diferentes tensões da água no solo sobre o desenvolvimento e produção de duas cultivares de cebola irrigadas por gotejamento. O experimento foi conduzido na área experimental do DAG/UFLA, no período de junho a outubro de 2008; o delineamento experimental utilizado foi em blocos casualizados, em esquema fatorial 2 x 6, com quatro repetições. Os tratamentos se constituíram de duas cultivares de cebola, cultivar híbrida Optima F1 e cultivar não híbrida Alfa Tropical, além de seis tensões da água no solo, 15, 25, 35, 45, 60 e 75 kPa. Concluiu-se que o híbrido Optima F1 apresentou melhores respostas com relação às seguintes características analisadas: produtividade total de bulbos, produtividade de bulbos comerciais e massa média de bulbos comerciais. A altura da planta e o diâmetro do colo apresentaram respostas lineares decrescentes, sempre que se aumentaram as tensões da água no solo, para ambas as cultivares. Referidas cultivares devem ser irrigadas no momento em que a tensão da água no solo estiver em torno de 15 kPa, na profundidade de 0,15 m, para obtenção de plantas mais altas, maiores produtividades de bulbos (total e comercial e maior massa média de bulbos comerciais.This work aimed to assess the effect of different water tensions in soil over the development and production of two onion cultivars irrigated by drip system. The experiment was carried in the experimental area of the DAG/UFLA, from June to October 2008. The experimental was conducted in randomized block design in 2 x 6 factorial scheme, with four repetitions. The treatments were two onion cultivars, the hybrid Optima F1 and the non hybrid Alfa Tropical and six soil water tensions, i.e., 15, 25, 35, 45, 60 and 75 kPa. It was verified that the hybrid Optima F1 presented the best responses regarding the following analyzed characteristics: total bulb yield, commercial bulb yield and average mass of

  11. Fundamentos para la clasificación del trigo argentino por calidad: efectos del cultivar, la localidad, el año y sus interacciones Bases for the segregation of Argentine bread wheat by quality: effects of cultivar, location, year and their interactions

    Directory of Open Access Journals (Sweden)

    P.E. Abbate

    2010-06-01

    variables studied, significant differences for each factor (P=0.05 were found .The location and year effects on quality traits were so important or more so than the cultivar effect. The most important interaction effect was location x year. The classification in quality groups was affected by location. Thus, location inclusion in wheat classification would be justified to define production protocols and to classify cultivars and Argentine wheat production.

  12. Avaliação de herbicidas para dois cultivares de mandioca Selectivity of herbicide alternatives for two cassava cultivars

    Directory of Open Access Journals (Sweden)

    D.F Biffe

    2010-12-01

    ,350+1,900, ametryn + trifluralin (1,500+1,350, isoxaflutole + metribuzin (60+320, isoxaflutole + diuron (60+400, combined with the use of a dual checkl adjacent to each treatment. The cultivars used were Fécula Branca and Fibra. Only herbicide S-metolachlor applied on both cultivars and metribuzin (360 g a.e. ha-1 applied on Fibra did not cause any injury. Atrazine reduced plant density only for Fécula Branca at 60 DAS (days after seeding but no difference in plant height was detected. Atrazine reduced plant density for cultivar Fécula Branca at 60 DAS, but no plant height reduction was detected. Both atrazine (for both cultivars and diuron at a dose of 800 g a.i. ha-1 (for Fécula Branca affected root productivity. Thus, atrazine was considered non-selective for both cultivars and the highest diuron dose was also considered non-selective for the cultivar Fécula branca. Differences in tolerance were verified among the cultivars used in this experiment, with Fibra in general being more tolerant to the herbicides evaluated.

  13. ‘Norine’, a cinnamon-linalool hybrid cultivar of basil

    Directory of Open Access Journals (Sweden)

    Arie Fitzgerald Blank

    2015-12-01

    Full Text Available 'Norine’ is a hybrid cultivar of basil, adapted to the Northeastern Brazil, which is derived from the cultivars ‘Cinnamon’ and ‘Maria Bonita’. It has essential oil content of 2.91% and yield of 2.37 mL plant-1. The main chemical compounds of the essential oil are (E-methyl cinnamate (41.93 % and linalool (34.92 %. ‘Norine’ is characterized by presenting upright growth habit, rounded crown, mean height of 55 cm, mean crown diameter of 59 cm, mean leaf length of 8.4 cm, and mean leaf width of 4.5 cm.

  14. Genetic relationships among okra (Abelmoschus esculentus (L. Moench cultivars in Nigeria

    Directory of Open Access Journals (Sweden)

    Bashir O. Bello

    2017-09-01

    Full Text Available This study was conducted on okra (Abelmoschus esculentus (L. Moench cultivars at the Teaching and Research Farm, University of Maiduguri, Nigeria. The objective was to evaluate the level of genetic divergence and heritability of eight characters in 2015 and 2016 dry seasons using irrigation. The results showed highly significant (p<0.01 differences in the ten okra cultivars for days to anthesis, plant height, fresh capsule length, fresh mass per capsule and fresh capsule diameter across the two years. A high genotypic coefficient of variation, heritability, and genetic advance were detected in all the characters except for days to anthesis and fresh capsule diameter. This implied that different genetic constitution and preponderance of additive effects governed these characters, thus presenting a significant opportunity for selection. The Mahanalobis D2 analysis allotted the ten cultivars into four clusters. The highest was cluster I comprising four cultivars, followed by cluster II containing three cultivars, cluster III consisting two cultivars, and cluster IV with mono genotypic. The three most superior okra cultivars (Salkade, Y’ar gagure and Kwadag for yield and related characters could be exploited directly or introgressed with other promising ones in future breeding programs.

  15. The Competitive Response Investigation of Eighteen Wheat (Triticum aestivum L. Cultivars with Wild Mustard (Sinapis arvensis L.

    Directory of Open Access Journals (Sweden)

    fatemeh abdolahi

    2018-02-01

    Full Text Available Introduction: The crop competitive ability is an important and profitable factor for increment impact on the weeds, and decreasing their yield loss. Characteristics such as height, leaf area, growth rate and tillering ability could be effective on competitive ability of cultivar ability. Primary growth rate is important on competitiveness, and any other factors that provides fast establishment of crops growth can be effective too. Thus, utilization of cultivars with height competitiveness ability is one of the considerable strategies for integrated weed managements. Many studies had shown that there are high correlation between crop height and its competitiveness ability. Asef et al (2 reported that tall cultivars reduced weed biomass more than dwarf cultivars due to light intercept and shading. Safahani- langrodi et al (32 in competition condition tall cultivars had high weed tolerance and cause to decrease weed biomass and set seed. There are an important relationship between LAI and weed competition. Hiffle et al. (13 showed cultivars with higher leaf area index had a greater yield stability. Dianat et al. (10 reported that in weed competitive conditions, there are significant difference in the number of tillers among wheat cultivars, while competitor and non-competitor cultivars have most and lowest tiller numbers respectively. Nadery and Ghadiri (25 showed that increasing wild mustard density decreased tiller number and more yield loss in weed competition have caused by decreased number of tillers. Materials and Methods: Experiment was conducted in order to study morphological characteristics and yield of wheat (T. aestivum cultivars in wild mustard (Sinapis arvensis L. competition in greenhouse, University of Mohaghegh Ardabili, during 2013-2014. Treatments were 18 wheat cultivars [Karkheh, Alborz, Azadi, Shahpasand, Sepahan, Flat, Ghods, Roshan, Sorkh¬tokhm, Moghan3, Alvand, MS-81-14, Yarvarus, Shahriyar, Golestn, Bam, Niknajad, Karaj3

  16. The structure of the Brassica napus seed microbiome is cultivar-dependent and affects the interactions of symbionts and pathogens.

    Science.gov (United States)

    Rybakova, Daria; Mancinelli, Riccardo; Wikström, Mariann; Birch-Jensen, Ann-Sofie; Postma, Joeke; Ehlers, Ralf-Udo; Goertz, Simon; Berg, Gabriele

    2017-09-01

    Although the plant microbiome is crucial for plant health, little is known about the significance of the seed microbiome. Here, we studied indigenous bacterial communities associated with the seeds in different cultivars of oilseed rape and their interactions with symbiotic and pathogenic microorganisms. We found a high bacterial diversity expressed by tight bacterial co-occurrence networks within the rape seed microbiome, as identified by llumina MiSeq amplicon sequencing. In total, 8362 operational taxonomic units (OTUs) of 40 bacterial phyla with a predominance of Proteobacteria (56%) were found. The three cultivars that were analyzed shared only one third of the OTUs. The shared core of OTUs consisted mainly of Alphaproteobacteria (33%). Each cultivar was characterized by having its own unique bacterial structure, diversity, and proportion of unique microorganisms (25%). The cultivar with the lowest bacterial abundance, diversity, and the highest predicted bacterial metabolic activity rate contained the highest abundance of potential pathogens within the seed. This data corresponded with the observation that seedlings belonging to this cultivar responded more strongly to the seed treatments with bacterial inoculants than other cultivars. Cultivars containing higher indigenous diversity were characterized as having a higher colonization resistance against beneficial and pathogenic microorganisms. Our results were confirmed by microscopic images of the seed microbiota. The structure of the seed microbiome is an important factor in the development of colonization resistance against pathogens. It also has a strong influence on the response of seedlings to biological seed treatments. These novel insights into seed microbiome structure will enable the development of next generation strategies combining both biocontrol and breeding approaches to address world agricultural challenges.

  17. Testing Optimum Seeding Rates for five Bread Wheat Cultivars

    International Nuclear Information System (INIS)

    Wekesa, S.J.; Kiriswa, F.; Owuoche, J.

    1999-01-01

    A cultivar by seed rate trial was conducted in 1994-1995 crop seasons at Njoro, Kenya. Yield results were found to be significant (P > 0.01) for year, variety, seed rate and year by seed rate interaction. Test weight was highly significant (P -1 were grouped together for significantly higher yields (A) whereas seed rates 85 and 50 kg ha -1 had lower significant yields (B and C respectively). The same grouping was repeated for test weight. There was no significant cultivar by seed rate interaction and no cultivar, specific seed rate. However, since seed rates 245, 205, 165 and 125 kg ha -1 were grouped together, the lowest seed rate, 125 kg ha -1 can be recommended as the optimum seed rate for the above cultivars, as higher seed rates do not give significantly higher yields or higher test weights

  18. Relative competitiveness of soybean cultivars with barnyardgrass

    Directory of Open Access Journals (Sweden)

    Marlon Ouriques Bastiani

    Full Text Available ABSTRACT The aim of this work was to evaluate the competitiveness between soybean cultivars and barnyardgrass, based on morphological and physiological characteristics of species. The experiments were conducted in completely randomized experimental design, with 4 replications. In the first study, for both soybean and barnyardgrass, it was determined the population of plants in which shoot dry matter became constant and independent of the population (16 plants∙pot−1 or 400 plants∙m−2. In the second study, 2 experiments were conducted to evaluate the competitiveness of BMX Apolo RR and BMX Potência RR soybean cultivars with barnyardgrass plants, both carried out in replacement series under different proportions of plants∙pot−1 (100:0; 75:25; 50:50; 25:75 and 0:100 between the crop and the weed. The analysis of the species competitiveness was determined through diagrams applied to replacement series experiments and use of relative competitiveness indexes. At 44 days after the emergence of species, the physiological and morphological parameters of the crop and the weed were evaluated. The BMX Apolo RR and BMX Potência RR soybean cultivars show similar competitiveness when competing with the barnyardgrass; therefore, the ability of one species to interfere on another is equivalent. For plant height, barnyardgrass displays higher competitiveness compared to BMX Apolo RR, with early cycle and short height. The intraspecific competition is more important to barnyardgrass than interspecific competition with soybean cultivars, resulting in negative effects on the morphological and physiological characteristics of species.

  19. Switchgrass Cultivar/Ecotype Selection and Management for Biofuels in the Upper Southeast USA

    Science.gov (United States)

    Parrish, David J.; Wolf, Dale D.

    2014-01-01

    Switchgrass (Panicum virgatum L.), a perennial warm-season grass indigenous to the eastern USA, has potential as a biofuels feedstock. The objective of this study was to investigate the performance of upland and lowland switchgrass cultivars under different environments and management treatments. Four cultivars of switchgrass were evaluated from 2000 to 2001 under two management regimes in plots established in 1992 at eight locations in the upper southeastern USA. Two management treatments included 1) a single annual harvest (in late October to early November) and a single application of 50 kg N/ha/yr and 2) two annual harvests (in midsummer and November) and a split application of 100 kg N/ha/yr. Biomass yields averaged 15 Mg/ha/yr and ranged from 10 to 22 Mg/ha/yr across cultivars, managements, locations, and years. There was no yield advantage in taking two harvests of the lowland cultivars (Alamo and Kanlow). When harvested twice, upland cultivars (Cave-in-Rock and Shelter) provided yields equivalent to the lowland ecotypes. Tiller density was 36% lower in stands cutting only once per year, but the stands appeared vigorous after nine years of such management. Lowland cultivars and a one-cutting management (after the tops have senesced) using low rates of applied N (50 kg/ha) are recommended. PMID:25105170

  20. Effect of Plant Growth Promoting Rhizobacteria (PGPR on Phenological Traits, Grain Yield and Yield Components of Three Maize (Zea mays L. Cultivars

    Directory of Open Access Journals (Sweden)

    A Soleimani Fard

    2013-11-01

    Full Text Available To evaluate the effect of bio-fertilize on yield and its components in maize cultivars, an split plot experiment based on randomized complete bock design with three replications in was conducted in Payam-noor University of Ilam, Iran, in 2009-2010. Treatments were cultivar (SC604, SC704 and SC807 assigned to main plots and bio-fertilizer (non- inoculation, inoculation with Azetobacter, Azospirillum and dual inoculation ofAzotobacterand Azospirillum to subplots. The effect of cultivar on days to maturity, plant height, dry matter, ear length, stem diameter, number of grain per ear row, 1000-grain weight, grain yield, biological yield and protein content was significant cultivar. SC 704 had the highest dry matter (259.5 g.m-2, plant height (201.1 cm, number of grain per ear row (42.8 grain, grain yield (10850 kg.m-2, and biological yield (22040 kg.m-2. The effect of plant growth promoting rhizobacteria on all traits expect harvest index was significant. Dual inoculation ofAzotobacterand Azospirillum had the longest days to ear initiation (71.2 days, days to maturity (115.4 day, number of leaves above ear (5.6 ear, dry matter (240.4 g.m-2, ear length (24.3 cm, plant height (212.4 cm, seed number of rows per ear (14.5 row, number of grains per row (44.2 grain, grain yield (10190 kg.m-2, biological yield (21320 kg.m-2 and protein content (10.7%. Interaction effect of cultivar× plant growth promoting rhizobacteria on grain yield was significant. The highest and lowest grain yield was obtained from SC 704 and application of dual inoculation ofAzotobacterand Azospirillum (12320 kg.ha-1 and lowest from SC 604 when inoculation treatments were not used 7570 kg.ha-1 respectively.

  1. Pathogenic Streptomyces spp. abundance affected by potato cultivars.

    Science.gov (United States)

    Nahar, Kamrun; Goyer, Claudia; Zebarth, Bernie J; Burton, David L; Whitney, Sean

    2018-04-16

    Potato cultivars vary in their tolerance to common scab (CS), however how they affect CS-causing Streptomyces spp. populations over time is poorly understood. This study investigated the effects of potato cultivar on pathogenic Streptomyces spp. abundance, measured using quantitative PCR, in three spatial locations in a CS-infested field: 1) soil close to the plant (SCP); 2) rhizosphere (RS); and 3) geocaulosphere (GS) soils. Two tolerant (Gold Rush, Hindenburg) and two susceptible cultivars (Green Mountain, Agria) were tested. The abundance of pathogenic Streptomyces spp. significantly increased in late August compared with other dates in RS of susceptible cultivars in both years. Abundance of pathogenic Streptomyces spp., when averaged over locations and time, was significantly greater in susceptible cultivars compared with tolerant cultivars in 2014. Principal coordinates analysis showed that SCP and RS soil properties (pH, organic carbon and nitrogen concentrations) explained 68% and 76% of total variation in Streptomyces spp. abundance among cultivars in 2013, respectively, suggesting that cultivars influenced CS pathogen growth conditions. The results suggested that the genetic background of potato cultivars influenced the abundance of pathogenic Streptomyces spp., with 5 to 6 times more abundant Streptomyces spp. in RS of susceptible cultivars compared with tolerant cultivars, which would result in substantially more inoculum left in the field after harvest.  .

  2. Allelopathic Effects of Four Chickpea Cultivars on Vegetative Growth of Sunflower and Corn under Controlled Conditions

    Directory of Open Access Journals (Sweden)

    k Hajmohammadnia Ghalibaf

    2011-02-01

    Full Text Available Abstract In order to study the effects of four chickpea cultivar (Cicer arietinum L. on vegetative growth of sunflower (Helianthus annus and corn (Zea mays, two separate experiments was conducted at Research Greenhouse of Ferdowsi University of Mashhad in 2005. Experiments were done in a factorial arrangement of treatments with two factors based on completely randomized design with 4 replications. Factors included chickpea cultivars (Karag12-60-31, Filip 84-482, Gam, ILC 482, and no residue control and planting date of corn and sunflowers within root residues of chick pea (seeds planted simultaneously, 2 weeks, and 4 weeks after harvesting of chickpea shoots. Seeds of corn and sunflower were planted within root residues of chickpea. Results showed that root residues of chickpea cultivars influenced height and shoot weight of sunflower significantly. The lowest sunflower height was obtained when they were planted within root residues of Flip and ILC cultivars, which decreased 13.7 and 11.1% relative to control, respectively. Planting date of sunflower within root residues of chick pea cultivars had a significant effect on sunflower leaf area, shoot weight, and its root/shoot ratio. So that, lowest leaf area, shoot weight, and also highest root/shoot ratio was obtained in third planting date. Results showed that lowest plant height, leaf area, root weight, shoot weight, and also highest root/shoot ratio of corn (6 weeks after planting was obtained after planting within chickpea cultivars, Gam and ILC. Also the effect of corn planting date was significant. The lowest root and shoot weight, and root/shoot ratio of corn was obtained in the earliest corn planting date. Therefore, corn plants showed more sensitive than sunflower after planting within chickpea cultivars, and the highest inhibitory effects resulted in the earliest corn planting date. Keywords: Pea cultivars, Integrated management, Crop rotation

  3. Symbiont interactions in a tripartite mutualism: exploring the presence and impact of antagonism between two fungus-growing ant mutualists.

    Directory of Open Access Journals (Sweden)

    Michael Poulsen

    Full Text Available Mutualistic associations are shaped by the interplay of cooperation and conflict among the partners involved, and it is becoming increasingly clear that within many mutualisms multiple partners simultaneously engage in beneficial interactions. Consequently, a more complete understanding of the dynamics within multipartite mutualism communities is essential for understanding the origin, specificity, and stability of mutualisms. Fungus-growing ants cultivate fungi for food and maintain antibiotic-producing Pseudonocardia actinobacteria on their cuticle that help defend the cultivar fungus from specialized parasites. Within both ant-fungus and ant-bacterium mutualisms, mixing of genetically distinct strains can lead to antagonistic interactions (i.e., competitive conflict, which may prevent the ants from rearing multiple strains of either of the mutualistic symbionts within individual colonies. The success of different ant-cultivar-bacterium combinations could ultimately be governed by antagonistic interactions between the two mutualists, either as inhibition of the cultivar by Pseudonocardia or vice versa. Here we explore cultivar-Pseudonocardia antagonism by evaluating in vitro interactions between strains of the two mutualists, and find frequent antagonistic interactions both from cultivars towards Pseudonocardia and vice versa. To test whether such in vitro antagonistic interactions affect ant colonies in vivo, we performed sub-colony experiments using species of Acromyrmex leaf-cutting ants. We created novel ant-fungus-bacterium pairings in which there was antagonism from one, both, or neither of the ants' microbial mutualists, and evaluated the effect of directional antagonism on cultivar biomass and Pseudonocardia abundance on the cuticle of workers within sub-colonies. Despite the presence of frequent in vitro growth suppression between cultivars and Pseudonocardia, antagonism from Pseudonocardia towards the cultivar did not reduce sub

  4. New cultivars of jujube induced by mutation

    International Nuclear Information System (INIS)

    Hoang, V.T.; Tuynh, N.V.

    1989-01-01

    Full text: Mutation breeding of jujube (Ziziphus mauritiana Lin.) received attention by the Food Crops Research Institute since 1978. Mutations can be directly released as new cultivars or indirectly as bud grafting source. N-methyl-N-nitroso urea (MNH) was used at a concentration of 0.02-0.04% for 12 h treatment of pre-germinated seeds of different jujube cultivars. Some useful mutants were selected and directly released as new cultivars to farmers. Of the selected mutants two cultivars, ''Ma hong'' and ''Dao tien'', are the most preferable and popularly grown in the country. ''Ma hong'' is a mutant of ''Gia Loc'', a very popular cultivar. Main useful traits of ''Gia Loc'' such as early maturing, two crops of fruits per year are maintained (harvest in December and August). ''Ma hong'' has round-formed, pink rose coloured, sweeter fruits and stable fruit yield in off-season (Aug.) as compared with oval-formed, yellow-coloured and sour fruit of ''Gia Loc''. ''Dao tien'' is a mutant of the local variety ''Thien Phien'' with quite different traits. The original cultivar is late maturing (harvested in Feb.) with one crop of fruit per year and has small fruits (mean wt. of fruit at harvest 20 g). ''Dao tien'' is one month earlier in maturing allowing two crops of fruit per year (harvested in Jan. and Nov.). Fruits are round-formed, bigger (mean wt. of fruit: 25 g) and more tasteful (peach-flavored and brittle). (author)

  5. Effect of chlormequat (cycocel) on the growth of ornamental cabbage and kale (Brassica oleracea) cultivars 'Kamome White' and 'Nagoya Red'.

    Science.gov (United States)

    Gholampour, Abdollah; Hashemabadi, Davood; Sedaghathoor, Shahram; Kaviani, Behzad

    2015-01-01

    The effect of concentration and application method of chlormequat (cycocel), a plant growth retardant, on plant height and some other traits in Brassica oleracea cultivars 'Kamome White' and 'Nagoya Red' was assessed. Plant growth retardants are commonly applied to limit stem elongation and produce a more compact plant. The experiment was done as a factorial in randomized completely blocks design (RCBD) with four replications. Plants (40 days after transplanting) were sprayed and drenched with 500, 1000 and 1500 mg l(-1) cycocel. In each experiment, control untreated plants. Data were recorded the 60 and 90 days after transplanting. Based on analysis of variance (ANOVA), the effect of different treatments and their interaction on all traits was significant at 0.05 or 0.01 level of probability. Treatment of 1500 mg I(-1) cycocel resulted in about 50 and 20% shorter plants than control plants, 60 and 90 days after transplant. The growth of Brassica oleracea cultivar 'Kamome White' and 'Nagoya Red' decreased with increased cycocel concentration. Foliar sprays of cycocel controlled plant height of both cultivars. Results indicated that the shortest plants (9.94 and 11.59 cm) were those sprayed with 1500 mg l(-1) cycocel in cultivar 'Kamome White' after 60 and 90 days, respectively. The largest number of leaves (33.94) and highest leaf diameter (9.39 cm) occurred in cv. 'Nagoya Red', when drench was used. Maximum dry matter (14.31%) accumulated in cv. 'Nagoya Red', treated with spray.

  6. Intraspecific responses of 188 rice cultivars to enhanced UVB radiation

    International Nuclear Information System (INIS)

    Dai, Q.; Peng, A.; Chavez, A.Q.; Vergara, B.S.

    1994-01-01

    Phytotron studies were conducted to determine the intraspecific variation in sensitivity of rice (Oryza sativa L.) to enhanced UVB and to test the hypothesis that rice cultivars originating from regions with higher ambient UVB radiation are more tolerant to enhanced UVB. Out of the 188 rice cultivars (from various rice growing regions and ecosystems) tested, 143 had significantly reduced plant height, 52 had smaller leaf area, 61 had lower plant dry weight and 41 had less tiller number under elevated UVB radiation (13.0 kJ m −2 day −1 ) for 3 weeks. Six cultivars showed significant positive growth response to enhanced UVB radiation, although the mechanism is not clear at present. These six cultivars were from the summer rice crop of Bangladesh and from high elevation rice areas where prevailing UVB radiation is most likely to be greater. However, there was no correlation between the dry matter changes under enhanced UVB and the ambient UVB level at the origin of the cultivar across the 188 cultivars tested. Therefore, cultivars originating from regions with higher ambient UVB are not necessarily more tolerant to enhanced UVB radiation. (author)

  7. Asp30 of Aspergillus oryzae cutinase CutL1 is involved in the ionic interaction with fungal hydrophobin RolA.

    Science.gov (United States)

    Terauchi, Yuki; Kim, Yoon-Kyung; Tanaka, Takumi; Nanatani, Kei; Takahashi, Toru; Abe, Keietsu

    2017-07-01

    Aspergillus oryzae hydrophobin RolA adheres to the biodegradable polyester polybutylene succinate-co-adipate (PBSA) and promotes PBSA degradation by interacting with A. oryzae polyesterase CutL1 and recruiting it to the PBSA surface. In our previous studies, we found that positively charged amino acid residues (H32, K34) of RolA and negatively charged residues (E31, D142, D171) of CutL1 are important for the cooperative ionic interaction between RolA and CutL1, but some other charged residues in the triple mutant CutL1-E31S/D142S/D171S are also involved. In the present study, on the basis of the 3D-structure of CutL1, we hypothesized that D30 is also involved in the CutL1-RolA interaction. We substituted D30 with serine and performed kinetic analysis of the interaction between wild-type RolA and the single mutant CutL1-D30S or quadruple mutant CutL1-D30S/E31S/D142S/D171S by using quartz crystal microbalance. Our results indicate that D30 is a novel residue involved in the ionic interaction between RolA and CutL1.

  8. Stability and adaptability of soybean cultivars in Minas Gerais.

    Science.gov (United States)

    Soares, I O; Bruzi, A T; Zambiazzi, E V; Guilherme, S R; Bianchi, M C; Silva, K B; Fronza, V; Teixeira, C M

    2017-08-17

    Genotypes x environment (G x E) interaction consists of different behavior of genotypes cultivated in different environments. This interaction occurs due to the performance variation of each genotype in different environments. To reduce the effect of the interaction in soybean crops, some studies have been reported in the literature to study their adaptability and stability. However, these studies are still scarce in Minas Gerais State. Thus, the aim of this study was to verify the adaptability and stability of soybean cultivars and identify the cultivars that contribute least to the G x E interaction in Minas Gerais. Six soybean cultivars were evaluated in 9 different environments. The plots were composed of 4 rows of 5 m with a spacing of 0.5 m between rows, and only the two central rows were harvested. The inoculation with Bradyrhizobium japonicum was performed through sowing furrow. The fertilization followed the recommendations of the Soil Fertility Commission of Minas Gerais. Grain yield was evaluated in kg/ha after conversion to 13% moisture. After individual analysis, the joint analysis was performed by grouping the phenotypic means by the Scott and Knott (1974) test. Wricke's ecovalence methodologies and the Annicchiarico confidence index were applied for the adaptability and stability analysis. The interaction was decomposed into a simple and a complex part. The cultivars BRSMG 820RR and BRSMG 760SRR have wide adaptability and stability. The first one presents a better index of confidence and a small contribution to the interaction.

  9. Study of Sesame (Sesame indicum L. Cultivars based on Morphological Characteristics Under Water Deficit Stress Condition Using Factor Analysis

    Directory of Open Access Journals (Sweden)

    A Asghari

    2014-03-01

    Full Text Available In order to evaluation sesame cultivars based on morphological characteristics under water deficit stress condition using factor analysis, an experiment was conducted as a split plot based on randomized complete block design with three replications during 2009 in Research Center of Agriculture and Natural Resources in Parsabad. In this experiment, irrigation as the main factor at three levels (50, 75 and 100 percent of crop water requirement and ten sesame cultivars as the sub-factor were studied. The water requirement of sesame was calculated using CROPWAT software (Penman-Monteith method according to FAO-56. Results showed significant differences between the cultivars and the irrigation levels for all studied traits. Interaction between cultivars and irrigation levels was significant for some of traits. Comparisons of means showed that in water deficit condition, yield and all of traits reduced. In all traits the greatest amounts observed in complete irrigation treatment. In 50 percent of water requirement treatment, amount of leaf chlorophyll, root length, root branches and root length/plant height ratio were greater than other treatments. The Karaj1, Ultan, Naze and IS cultivars were better than other cultivars in stress and non stress condition. In factor analysis 5 and 4 first factors in non stress and stress condition explained 91.36 and 89.52 percent of trait variance, respectively. Grouping of sesame cultivars based on first and second factors in non stress conditions showed that Karaj1, Ultan and Naze cultivars were better than other cultivars. Also, in stress conditions Karaj1 and Ultan cultivars grouped as water deficit stress and better cultivars.

  10. Metabolic phenotyping of various tea (Camellia sinensis L.) cultivars and understanding of their intrinsic metabolism.

    Science.gov (United States)

    Ji, Hyang-Gi; Lee, Yeong-Ran; Lee, Min-Seuk; Hwang, Kyeong Hwan; Kim, Eun-Hee; Park, Jun Seong; Hong, Young-Shick

    2017-10-15

    Recently, we selected three tea (Camellia sinensis) cultivars that are rich in taste, epigallocatechin-3-O-gallate (EGCG) and epigallocatechin-3-O-(3-O-methyl)-gallate (EGCG3″Me) and then cultivated them through asexual propagation by cutting in the same region. In the present study, proton nuclear magnetic resonance ( 1 H NMR)-based metabolomics was applied to characterize the metabotype and to understand the metabolic mechanism of these tea cultivars including wild type tea. Of the tea leaf metabolite variations, reverse associations of amino acid metabolism with catechin compound metabolism were found in the rich-taste, and EGCG- and EGCG3″Me-rich tea cultivars. Indeed, the metabolism of individual catechin compounds in the EGCG3″Me-rich cultivar differed from those of other tea cultivars. The current study highlights the distinct metabolism of various tea cultivars newly selected for cultivation and the important role of metabolomics in understanding the metabolic mechanism. Thus, comprehensive metabotyping is a useful method to assess and then develop a new plant cultivar. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. SEED YIELD AND ITS COMPONENTS OF ALFALFA AS INFLUENCED BY SULFUR AND LAST CUTTING DATE

    Directory of Open Access Journals (Sweden)

    H. K. Khrbeet

    2016-09-01

    Full Text Available A field study was conducted at the experimental farm, Coll. of Agric., Abu-Ghraib, Baghdad, Iraq during the period from mid of march 2013 to end of August 2014 to investigate the effect of different levels of sulfur (0, 1, 2 and 3 ton. ha-1 and three dates of last cutting (1, 10th and 20th ,May 2014_ on seed yield and it’s components of alfalfa local cultivar, Layout of the experiment was R.C.B.D. arranged in split –plots with three replications. Sulfur levels were used as main plot and the time when last cutting occurs was sub-plot. Results, showed that addition of sulfur at level more than 1 ton.ha-1 (2, 3 ton ha-1 resulted in a significant increasment in the No. of seeds per pod, No. of pods per raceme, No. of racemes per stem, No. of stems per m-2 and seed yield kg.ha-1 . While, No. of ovules per floret, % of ovules abortion and 1000 seed weight were not significantly influenced by sulfur levels. Highest seed yield (579.4 Kg ha-1 was obtained when sulfur added at level 2 ton ha-1 . Plants, when last cutting occurred on 10th of May produced highest No. of pods per raceme, No. of stems per m-2 and seed yield (530.8 Kg h-1 . There were no significant effect of last cutting date on, No. of ovules per floret, No. of seed per pod, % of abortion and 1000 seed weight. There were high positive correlation between seed yield and each of No. of seeds per pods, No. of pods per raceme and No. racemes per stem (+0.880, +0.918 and +0.920 respectively. This result suggests that yield components may be good selection criteria for breeding seed yield of alfalfa cultivars. High seed yield can be obtained from stands received 2 ton ha-1 and last cutting occurred on 10th May.

  12. RESPOSTA DE DUAS CULTIVARES DE ARROZ DE TERRAS ALTAS EM CONVIVÊNCIA COM Brachiaria brizantha

    Directory of Open Access Journals (Sweden)

    Abdias Alves De Oliveira

    2009-01-01

    Full Text Available The objective of this work was to evaluate to the sowing time of the Brachiaria brizantha forage intercrop with two upland rice cultivars on the agronomics characteristics of both species. It was used randomized blocks in experimental design arranged in factorial scheme 2x2+4, with four replicates. The first factor was constituted by the upland rice cultivars (BRS Primavera e BRSMG Curinga and the second factor by two sowing times of B. brizantha forage (simultaneous sowing between rice and forage and sowing of the forage in the flowering of the rice. The additional treatments consisted of the sole crops upland rice cultivars and B. brizantha forage for each sowing time. In rice was evaluated the height of the plants, bedding, difficulty of the harvest, the number of panicles per area, grain per panicles, percentage of full and empty grains, 100-grain mass and grain yield. In the B. brizantha forage was evaluated the height of the tillers, the total dry mass and the rate of cultural growth. It was observed that the B. brizantha forage interfered in the productivity components of both upland rice cultivars and difficult significantly the harvest of the rice. The upland rice cultivars showed small competitive capacity with the B. brizantha forage when the establishment of the forage occurred simultaneously to the rice. However, to the measure that the sowing was occurred with the established rice already, the B. brizantha forage had his growth suppressed.

  13. Agronomic performance and beer quality assessment of twenty hop cultivars grown in Central Italy

    Directory of Open Access Journals (Sweden)

    Francesco Rossini

    2016-08-01

    Full Text Available Hop market and beer industry have always been of secondary relevance in Italy as compared to grape and wine sector. Hence, hop cultivars and the information for growing hops have been generated almost entirely from the major hop production countries. Identifying cultivars that perform well in Mediterranean environments is therefore essential to successfully start hop cultivation and breeding activity in this new growing region. To evaluate the intraspecific diversity of hop in Central Italy, 20 female hop genotypes with different origin were screened during three growing seasons (2013-2015 in an experimental hop yard. Cones yield, plant height and crop phenology were evaluated to determine which cultivars were best suited to the Mediterranean climate. Moreover, given the rising interest for the development of local beers with distinguishing aroma, a sensory analysis was performed and beers flavoured with locally produced and imported cones were compared. A significant diversity among cultivars was found for all parameters investigated. The results indicated that weather condition during flowering and development of cones markedly affected yield and plant height. Cones yield was negatively correlated with thermal time (r=–0.5, P<0.05 to harvest and positively with plant height (r=0.56, P<0.05. Cascade, Hallertauer Magnum, Hersbrucker Spat and Yeoman showed the best adaptability to the Mediterranean growing conditions as they were the top-performing cultivars across the three years. Sensory analysis evidenced the importance of cultivar selection as determining factor for flavouring properties of beers. In general, results showed that the origin of cones strongly affected the mouth feel of beers. More complex and appreciated aroma profiles were identified for beers flavoured with local cones than those hopped with commercial products.

  14. Desempenho de cultivares de alface na região de Manaus Performance of lettuce cultivars in Manaus region

    Directory of Open Access Journals (Sweden)

    Isac N Rodrigues

    2008-12-01

    Full Text Available Na avaliação de cultivares de hortaliças, os rendimentos médios mais elevados nos ensaios de competição, associados a fatores de qualidade, são utilizados como critérios de recomendação para plantio. O presente trabalho teve como objetivo avaliar as cultivares de alface Frisella, Deisy, Tender Green, Lollo Bionda, Itapuã 401, Marisa, Verônica, Banchu New Red Fire e Hortência nas condições climáticas da região de Manaus, sob cultivo protegido e a campo. Foram avaliadas as características: massa fresca total, massa fresca comercial, diâmetro da cabeça e altura. As cultivares de alface Marisa, Itapuã 401 e Hortência são opções mais adequadas para o cultivo protegido e a campo na região, incluindo-se para o cultivo a campo a cultivar Verônica, a qual apresentou a melhor produção na avaliação realizada neste ambiente.In the evaluation of vegetable cultivars, the high average yield in the competition assays associated to quality factors are utilized as criteria to recommend cultivars. In the present work we evaluated the lettuce cultivars Frisella, Deisy, Tender Green, Lollo Bionda, Itapuã 401, Marisa, Verônica, Banchu New Red Fire and Hortência under the climatic conditions of the region of Manaus, under protected and conventional cultivation. The evaluated characteristics were: total and commercial weight, plant diameter and height. The lettuce cultivars Marisa, Itapuã 401 and Hortência presented higher production in both environments adding Verônica with best production under conventional cultivation.

  15. Plant type improvement of indigenous rice cultivars through induced mutations

    International Nuclear Information System (INIS)

    Kihupi, A.

    1997-01-01

    A high yielding, locally adapted cultivar 'Afaa Mwanza 1/159' of rice (Oryza sativa L.) which is tall and late in maturity, was irradiated with gamma rays at doses of 170, 210 and 250 Gy to shorten plant height and time of maturity. Twelve mutants were selected, and evaluated for yield performance in field trials from M 6 to M 9 generations. All the mutants were shorter in plant height, and gave higher mean yield than the parent. Correlation coefficient analysis showed that the number of productive tillers, number of panicles per square meter and grain filling in the panicle were important characters which influenced yield. On the other hand, panicle length had negative influence on yield. Cv. 'Supa India' and 'Salama' were also irradiated with doses of 170, 210, 240 Gy gamma rays. Analysis of M 2 populations of these cultivars indicated that mutagenesis created a lot of variation in plant height, maturity, spikelet fertility and panicle length. The induced variation shall be useful in selecting desired plant types. (author). 16 refs, 12 tabs

  16. Plant type improvement of indigenous rice cultivars through induced mutations

    Energy Technology Data Exchange (ETDEWEB)

    Kihupi, A [Department of Crop Science and Production, Sokoine Univ. of Agriculture, Morogoro (Tanzania)

    1997-07-01

    A high yielding, locally adapted cultivar `Afaa Mwanza 1/159` of rice (Oryza sativa L.) which is tall and late in maturity, was irradiated with gamma rays at doses of 170, 210 and 250 Gy to shorten plant height and time of maturity. Twelve mutants were selected, and evaluated for yield performance in field trials from M{sub 6} to M{sub 9} generations. All the mutants were shorter in plant height, and gave higher mean yield than the parent. Correlation coefficient analysis showed that the number of productive tillers, number of panicles per square meter and grain filling in the panicle were important characters which influenced yield. On the other hand, panicle length had negative influence on yield. Cv. `Supa India` and `Salama` were also irradiated with doses of 170, 210, 240 Gy gamma rays. Analysis of M{sub 2} populations of these cultivars indicated that mutagenesis created a lot of variation in plant height, maturity, spikelet fertility and panicle length. The induced variation shall be useful in selecting desired plant types. (author). 16 refs, 12 tabs.

  17. Cutting weeds with a CO2 laser

    DEFF Research Database (Denmark)

    Heisel, T.; Schou, Jørgen; Christensen, S.

    2001-01-01

    Stems of Chenopodium album. and Sinapis arvensis. and leaves of Lolium perenne. were cut with a CO2 laser or with a pair of scissors. Treatments were carried out on greenhouse-grown pot plants at three different growth stages and at two heights. Plant dry matter was measured 2 to 5 weeks after...... treatment. The relationship between dry weight and laser energy was analysed using a non-linear dose-response regression model. The regression parameters differed significantly between the weed species. At all growth stages and heights S. arvensis was more difficult to cut with a CO2 laser than C. album....... When stems were cut below the meristems, 0.9 and 2.3 J mm(-1) of CO2 laser energy dose was sufficient to reduce by 90% the biomass of C. album and S. arvensis respectively. Regrowth appeared when dicotyledonous plant stems were cut above meristems, indicating that it is important to cut close...

  18. Evaluation of Various Morpho-Physiological and Growth Traits of Dual Purpose Wheat under Early Sowing Dates

    International Nuclear Information System (INIS)

    Munsif, F.; Arif, M.; Rasul, F.

    2016-01-01

    The use of wheat as dual purpose crop (for fodder and grain) is considered as promising agronomic management practice fulfilling human and animal need at same time. These expectations are largely found on positive experiences by growing wheat as dual purpose crop throughout the world. However, the validity of these results in Pakistan needs confirmation from field experiments under various sowing date and potential cultivars. The impact of cutting and sowing date on morphological and physiological traits of already existing wheat cultivars was evaluated at Agricultural Research Farm of The University of Agriculture, Peshawar Pakistan in winter 2010-2011 and 2011-2012. Three sowing dates i.e. 15th October, 30th October and 14th November and six wheat cultivars (Ghaznavi-98, Fakhre-Sarhad (FS)-99, Ghaznavi-98, Saleem-2000, Uqab-2000 and Siran-2008) were compared for dual purpose wheat production during the course of experiment. Findings showed that significant reduction were recorded in nodes tiller/sup -1/, plant height, spike weight and grains weight spike/sup -1/ when sowing of wheat delayed from 15th and 30th October to 15th November. Considerable variations were also noted in nodes tiller/sup -1/, internodes length and leaf area index, plant height and lodging score among wheat cultivars but it was mainly due to their genetic characteristic not because of cutting treatment. It was observed that cutting caused 5.5, 12.1, 6.2, 4.1, 25.9, 7.1,6.6% reduction in wheat leaf area, leaf area index, internode length, plant height, lodging score, spike weight and grains weight spike/sup -1/, respectively over non cut plots in both year of the experiment. Interestingly, no-significant change was noted in spike length and number of nodes tiller/sup -1/ under cut and no cut plots. The conclusive findings suggested that optimum sowing date (15th and 30th October) for all wheat cultivars could be utilized as potential source of dual purpose wheat for substantial reduction of

  19. Effect of Salt Stress on Growth, Na+ Accumulation and Proline Metabolism in Potato (Solanum tuberosum) Cultivars

    NARCIS (Netherlands)

    Jaarsma, R.; Vries, R.S.M.; de Boer, A.H.

    2013-01-01

    Potato (Solanum tuberosum) is a major crop world-wide and the productivity of currently used cultivars is strongly reduced at high soil salt levels. We compared the response of six potato cultivars to increased root NaCl concentrations. Cuttings were grown hydroponically and treated with 0 mM, 60 mM

  20. Interaction of Vortex Ring with Cutting Plate

    Science.gov (United States)

    Musta, Mustafa

    2015-11-01

    The interaction of a vortex ring impinging on a thin cutting plate was made experimentally using Volumetric 3-component Velocitmetry (v3v) technique. The vortex rings were generated with piston-cylinder vortex ring generator using piston stroke-to-diameter ratios and Re at 2-3 and 1500 - 3000, respectively. The cutting of vortex rings below center line leads to the formation of secondary vortices on each side of the plate which is look like two vortex rings, and a third vortex ring propagates further downstream in the direction of the initial vortex ring, which is previously showed by flow visualization study of Weigand (1993) and called ``trifurcation''. Trifurcation is very sensitive to the initial Reynolds number and the position of the plate with respect to the vortex ring generator pipe. The present work seeks more detailed investigation on the trifurcation using V3V technique. Conditions for the formation of trifurcation is analyzed and compared with Weigand (1993). The formed secondary vortex rings and the propagation of initial vortex ring in the downstream of the plate are analyzed by calculating their circulation, energy and trajectories.

  1. Avaliação do rendimento forrageiro da soja em quatro sistemas de corte, sucedida por milheto ou milho Forage yield of soybean in four cutting sistem, succeeded by millet or corn

    Directory of Open Access Journals (Sweden)

    Élberis Pereira Botrel

    2003-10-01

    Full Text Available Com o objetivo de avaliar o rendimento forrageiro da soja, sucedida pelo milheto ou milho, foram conduzidos experimentos em campo, na Universidade Federal de Lavras UFLA, Lavras, MG, nos anos 1997/1998 e 1998/1999. Para analisar o comportamento dessas culturas, adotou-se o delineamento experimental de blocos casualizados, com três repetições. A cultura da soja foi avaliada em 4 épocas de corte (60 dias para forragem + rebrota para rolão, cortes aos 60 e 100 dias para forragem, corte único para forragem aos 100 dias e produção exclusiva de rolão; 2 cultivares, Cristalina e Doko e, 2 sucessões, milheto e milho. Para a análise dos dados obtidos dos cultivos da soja, milheto e milho, foram utilizados os rendimentos de matéria seca e proteína bruta. O maior rendimento de matéria seca foi alcançado com o corte único da soja realizado aos 100 dias, utilizando-se as cultivares Doko ou Cristalina e, em sucessão, a cultura do milho, ao passo que para o rendimento de proteína bruta, o corte para forragem aos 60 dias com rebrota para rolão foi superior com a cultivar Doko, sucedida pelo milho.Aiming to avaluate the forage yield of soybean, succeeded by millet or corn, experiments were conducted in field at the Universidade Federal de Lavras, UFLA, Lavras, MG, in the years 1997/1998 and 1998/1999. To analyze the behavior of those crops, the experimental randomized block design with three replicates in a factorial scheme. The soybean crop was evaluated at four cutting seasons ⏈ days for forage + regrowth for rolao (straw + grain, cuts at 60 and 100 days for forage, single cut for forage at 100 days and exclusive production of rolao] 2 cultivars, Cristalina and Doko and, and 2 successions, millet and corn. For the analysis of the data obtained from the cultivation of soybean, and successions, dry matter and crude protein yields were utilized. The comparison between soybean four cutting seasons and its successions, for the dry matter stood

  2. Effect of Sowing Date on Some Agronomic Characteristics and Seed Yield of Winter Wheat Cultivars

    Directory of Open Access Journals (Sweden)

    A. Ganbari

    2012-08-01

    Full Text Available To evaluate the effect of sowing dates on yield, yield components and some agronomic characteristics of four winter wheat cultivars and also their phenological changes, a factorial experiment based on randomized complete block design with three replications was carried out at the Agriculture Research Station of Ardabil (Iran during 2009 growing season. First factor consisted of four wheat cultivars (Azar2, Sabalan, Sardari and Zagros and second factor consisted of four sowing dates (1st, 10th, 20th and 30th of September. The results showed that sowing date had significant effect on the number of spikes, the number of seed per spike, 1000-seed weight, germination percentage, days to spike appearance, days to ripening, growing degree days, biological yield, seed yield and harvest index. The highest and lowest seed yields of wheat were obtained from sowing date of the September the first (4616 kg/ha and sowing date of September 30th (2197 kg/ha respectively. Delaying planting decreased the number of spikes per m2 and 1000-seed weight. Cultivars had significant effect on all of the traits measured, except leaf number, fertile and non-fertilie tillers. The highest and the lowest seed yields were obtained from Sabalan (4750 kg/ha and Zagros (2757 kg/ha cultivars respectively. Interaction of sowing date and cultivar were significant on all of traits measured, except stem height, the leaf number, the number of spikes, 1000-seed weight and seed yield (P

  3. Comportamento de cultivares de cafeeiro em diferentes densidades de plantio The behavior of coffee cultivars under different plant densities

    Directory of Open Access Journals (Sweden)

    Edison Martins Paulo

    2005-01-01

    studied with two plants in the same hole, spaced of 2,0 m in the plant line. The experimental design was the randomized completely blocks with three replications, using the split-plot system. The plots were the densities and the split-plots were the cultivars. Results showed that, with increasing of the planting density, the plant height also increased, while the stem and plant basis diameters were reduced, however the planting density did not affect the height of the first branch. The increase of the planting density also increased the field productivity and reduced the production of individual plant. The cultivation of two plants at the same hole reduced the stem diameter and the plant yield. The cultivar Catuaí Amarelo IAC 47 showed the higher plant height and the higher plant basis diameter while cv. Obatã IAC 1669-20 showed the higher stem diameter. The field productivity and individual plant productivity were not different between those cultivars in the period studied (1997-2000.

  4. Performance of maize cultivars for fodder production under rainfed conditions of pothohar tract

    International Nuclear Information System (INIS)

    Gurmani, Z.A.; Zahid, M.S.

    2008-01-01

    For finding the forage yield potential of eight maize cultivars, the cultivars were sown in the month of July during both consecutive years 2001 and 2002 and harvested in the month of September in both the years. The cultivars differed significantly from one another with regard to plant height, number of leaves per tiller, number of plants per row, leaf area per plant, green fodder and dry matter yield. The cultivar, Akbar produced taller plants, with the largest leaf area among and more number of leave per tiller, and consequently yielded highest amount of green as well as dry matter among all the varieties under the rainfed climatic conditions of Pothohar tract of Pakistan. (author)

  5. Cultivares de soja sob plantio direto em Latossolo Vermelho compactado = Soybean cultivars under no-till on a compacted oxisol

    Directory of Open Access Journals (Sweden)

    Neyde Fabíola Balarezo Giarola

    2009-10-01

    of soil were evaluated: no-tillage without additional compaction (PD-C0 and no-tillage with additional compaction (PD-C1, and five varieties of soybeans: (1 Coodetec 204, (2 Coodetec 215, (3 Monsoy 5942, (4 Embrapa 48 and (5 Spring. A completely randomized experimental design in a 5 x 2 factorial scheme was adopted. The attributes of soil evaluated were: bulk density, totalporosity, macro- and microporosity. In the plants, the following parameters were assessed: harvesting dates, plant height, height of insertion of the first pod, mass of one thousand grains and productivity. The results showed that the parameters for the production of soybean cultivars were not influenced by the different levels of soil compaction, and the differences observed were due to the characteristics of the cultivars themselves.

  6. Divergência genética entre acessos e cultivares de mamoneira por meio de estatística multivariada Genetic divergence on castor bean accesses and cultivars through multivariate analysis

    Directory of Open Access Journals (Sweden)

    Mauro Nóbrega da Costa

    2006-11-01

    Full Text Available O objetivo deste trabalho foi avaliar a divergência genética entre acessos e cultivares de mamoneira (Ricinus communis L. e utilizá-la como critério na escolha de genitores que viabilizem, a partir de hibridações, a formação de populações segregantes. Os tratamentos foram representados pelos acessos BRA 4871, BRA 2968, BRA 5550 e BRA 7722 Papo-de-gia, e as cultivares BRS 188 Paraguaçu, BRS 149 Nordestina, IAC-80, Mirante-10 e Pernambucana Melhorada. As características analisadas foram: início do florescimento (FR, número de racemos por planta (NRP, comprimento efetivo do racemo primário (CR, altura de planta (AP, potencial produtivo (PP e teor de óleo nas sementes (TO. A divergência genética foi estimada por meio de estatística multivariada, com base em variáveis canônicas e análise de agrupamento, tendo-se empregado a distância euclidiana média. Houve a formação de dois grupos: o grupo I formado por oito genótipos e o grupo II por apenas um genótipo, a cultivar Mirante-10. Apesar de a cultivar Mirante-10 ter sido a mais divergente, não deve ser recomendada para hibridação, por sua baixa média de desempenho. As demais cultivares também apresentam restrições para hibridação, por serem bastante similares. As variáveis que mais contribuíram para a divergência genética foram FR, AP, TO e CR.This work aimed to evaluate genetic divergence among castor bean (Ricinus communis L. cultivars, in order to enable the choice of parents which make the formation of segregating populations possible. Accesses BRA 4871, BRA 2968, BRA 5550 and BRA 7722 Papo-de-gia, and cultivars BRS 188 Paraguaçu, BRS 149 Nordestina, IAC-80, Mirante-10 and Pernambucana Melhorada were evaluated. Characteristics analyzed were: days to flowering, number of racemes per plant, length of pistillate region of main raceme, plant height, potential yield, and seed oil content. The genetic divergence among accesses and cultivars was studied by

  7. Case-related factors affecting cutting errors of the proximal tibia in total knee arthroplasty assessed by computer navigation.

    Science.gov (United States)

    Tsukeoka, Tadashi; Tsuneizumi, Yoshikazu; Yoshino, Kensuke; Suzuki, Mashiko

    2018-05-01

    The aim of this study was to determine factors that contribute to bone cutting errors of conventional instrumentation for tibial resection in total knee arthroplasty (TKA) as assessed by an image-free navigation system. The hypothesis is that preoperative varus alignment is a significant contributory factor to tibial bone cutting errors. This was a prospective study of a consecutive series of 72 TKAs. The amount of the tibial first-cut errors with reference to the planned cutting plane in both coronal and sagittal planes was measured by an image-free computer navigation system. Multiple regression models were developed with the amount of tibial cutting error in the coronal and sagittal planes as dependent variables and sex, age, disease, height, body mass index, preoperative alignment, patellar height (Insall-Salvati ratio) and preoperative flexion angle as independent variables. Multiple regression analysis showed that sex (male gender) (R = 0.25 p = 0.047) and preoperative varus alignment (R = 0.42, p = 0.001) were positively associated with varus tibial cutting errors in the coronal plane. In the sagittal plane, none of the independent variables was significant. When performing TKA in varus deformity, careful confirmation of the bone cutting surface should be performed to avoid varus alignment. The results of this study suggest technical considerations that can help a surgeon achieve more accurate component placement. IV.

  8. A new Job's tear cultivar ''Hatohikari''

    International Nuclear Information System (INIS)

    Ishida, M.; Chiba, I.; Kato, M.; Okuyama, Y.; Sugawara, S.; Tanosaki, S.; Shindo, K.; Ishikura, N.; Seki, K.; Endo, T.; Shibata, M.

    1997-01-01

    A new Job's tear cultivar ''Hatohikari'', developed at the Tohoku National Agricultural Experiment Station, Morioka, Japan was registered as Norin No.2 Job's tear and released by Japan's Ministry of Agriculture, Forestry and Fisheries in 1995. ''Hatohikari'' is a progeny from a gamma-ray radiated mutant of ''Okayama-zairai'' in 1980. ''Okayama-zairai'' shows high yield and good quality. However, its demerits are late maturity and long plant height. The major agronomic characteristics of the new cultivar ''Hatohikari'' are as follows: The maturity is earlier than that of ''Okayama0zairai'', yielding ability is 38% higher than that of ''Okayama-zairai , the plant height is 30 cm shorter than that of ''Okayama-zairai'' and it is suitable for combine harvest. ''Hatohikari'' has large seeds with good quality for tea processing. Shattering is easy, and resistance to leaf blight is medium. ''Hatohikari'' is adaptable to middle mountain regions in chugoku district of Japan. This cultivar has been recommended in Hiroshima prefecture since 1995

  9. Depth-of-Interaction Compensation Using a Focused-Cut Scintillator for a Pinhole Gamma Camera.

    Science.gov (United States)

    Alhassen, Fares; Kudrolli, Haris; Singh, Bipin; Kim, Sangtaek; Seo, Youngho; Gould, Robert G; Nagarkar, Vivek V

    2011-06-01

    Preclinical SPECT offers a powerful means to understand the molecular pathways of drug interactions in animal models by discovering and testing new pharmaceuticals and therapies for potential clinical applications. A combination of high spatial resolution and sensitivity are required in order to map radiotracer uptake within small animals. Pinhole collimators have been investigated, as they offer high resolution by means of image magnification. One of the limitations of pinhole geometries is that increased magnification causes some rays to travel through the detection scintillator at steep angles, introducing parallax errors due to variable depth-of-interaction in scintillator material, especially towards the edges of the detector field of view. These parallax errors ultimately limit the resolution of pinhole preclinical SPECT systems, especially for higher energy isotopes that can easily penetrate through millimeters of scintillator material. A pixellated, focused-cut (FC) scintillator, with its pixels laser-cut so that they are collinear with incoming rays, can potentially compensate for these parallax errors and thus improve the system resolution. We performed the first experimental evaluation of a newly developed focused-cut scintillator. We scanned a Tc-99m source across the field of view of pinhole gamma camera with a continuous scintillator, a conventional "straight-cut" (SC) pixellated scintillator, and a focused-cut scintillator, each coupled to an electron-multiplying charge coupled device (EMCCD) detector by a fiber-optic taper, and compared the measured full-width half-maximum (FWHM) values. We show that the FWHMs of the focused-cut scintillator projections are comparable to the FWHMs of the thinner SC scintillator, indicating the effectiveness of the focused-cut scintillator in compensating parallax errors.

  10. Fear of heights and visual height intolerance.

    Science.gov (United States)

    Brandt, Thomas; Huppert, Doreen

    2014-02-01

    The aim of this review is, first, to cover the different aspects of visual height intolerance such as historical descriptions, definition of terms, phenomenology of the condition, neurophysiological control of gaze, stance and locomotion, and therapy, and, second, to identify warranted epidemiological and experimental studies. Vivid descriptions of fear of heights can be found in ancient texts from the Greek, Roman, and Chinese classics. The life-time prevalence of visual height intolerance is as high as 28% in the general population, and about 50% of those who are susceptible report an impact on quality of life. When exposed to heights, visual exploration by eye and head movements is restricted, and the velocity of locomotion is reduced. Therapy for fear of heights is dominated by the behavioral techniques applied during real or virtual reality exposure. Their efficacy might be facilitated by the administration of D-cycloserine or glucocorticoids. Visual height intolerance has a considerable impact on daily life and interpersonal interactions. It is much more frequent than fear of heights, which is defined as an environmental subtype of a specific phobia. There is certainly a continuum stretching from acrophobia to a less-pronounced visual height intolerance, to which the categorical distinction of a specific phobia does not apply.

  11. Multi-Criteria Analysis of Laser Cut Surface Characteristics in CO2 Laser Cutting of Stainless Steel

    Directory of Open Access Journals (Sweden)

    M. Radovanović

    2015-06-01

    Full Text Available In this paper an approach for multi-criteria analysis of laser cut surface characteristics using multi-criteria decision making (MCDM approach was presented. Laser cutting experiment was conducted based on Taguchi’s L27 experimental design by varying laser power, cutting speed, assist gas pressure and focus position at three levels. Multi-criteria analysis was performed by using the weighted aggregated sum product assessment (WASPAS method while considering burr height, drag line separation, depth of separation line, surface roughness and perpendicularity of the cut as assessment criteria. Based on conducted experimental investigation the MCDM model with 27 alternatives (laser cuts and five criteria was developed. The relative importance of criteria was determined by using pair-wise comparison matrix and geometric mean method of the analytic hierarchy process (AHP method.

  12. Switchgrass cultivar EG1101

    Science.gov (United States)

    Bouton, Joseph H; Wood, Donald T

    2012-11-27

    A switchgrass cultivar designated EG1101 is disclosed. Also disclosed are seeds of switchgrass cultivar EG1101, plants of switchgrass EG1101, plant parts of switchgrass cultivar EG1101 and methods for producing a switchgrass plant produced by crossing switchgrass cultivar EG1101 with itself or with another switchgrass variety. Methods are also described for producing a switchgrass plant containing in its genetic material one or more transgenes and to the transgenic switchgrass plants and plant parts produced by those methods. Switchgrass cultivars or breeding cultivars and plant parts derived from switchgrass variety EG1101, methods for producing other switchgrass cultivars, lines or plant parts derived from switchgrass cultivar EG1101 and the switchgrass plants, varieties, and their parts derived from use of those methods are described herein. Hybrid switchgrass seeds, plants and plant parts produced by crossing the cultivar EG1101 with another switchgrass cultivar are also described.

  13. Laser cutting of sheets for Tailored Blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    sound welds. Laser cutting the sheets may therefore be an alternative to shear cutting, if the cut kerf squareness can be kept below 0.05 mm.In a number of systematic laboratory experiments the effects of the major process parameters in laser cutting have been investigated. Each cut was quantified...... by the squareness, the surface roughness and the burr height. Mild steel as well as high strength steel with and with out galvanisation with thickness' of 0.7(5) and 1.25 were used.In the tests the difference in cut quality between a 5" and a 7.5" focusing lens were tested and the effect of using pulsed mode laser...

  14. Productive performance of soybean cultivars grown in different plant densities

    Directory of Open Access Journals (Sweden)

    Augusto Belchior Marchetti Ribeiro

    Full Text Available ABSTRACT: Plants density in soybean cultivation is an important management practice to achieve high grain yield. In this way, the objective was to evaluate the agronomic traits and grain yield in soybean in different plant densities, in two locations in the south of Minas Gerais. The experimental design was in randomized blocks, arranged in a split plot design, with three replications. Plots were composed of four population densities (300, 400, 500 and 600 thousand plants per hectare and the subplots were composed of six cultivars (‘BMX Força RR’, ‘CD 250 RR’, ‘FMT 08 - 60.346/1’, ‘NA 5909 RR’, ‘TMG 7161 RR’ and ‘V - TOP RR’ grown in Lavras and Inconfidentes, both in Minas Gerais. At the time of harvest was determined the plant height, lodging, insertion of the first pod, harvest index, number of pods per plant, number of grains, number of grains per pod and yield. Regardless of the soybean cultivar, the plant density of up to 600,000 per ha does not affect grain yield, plant height, lodging, harvest index, and number of grains per pod. The cultivars ‘V-TOP RR’ and ‘BMX FORÇA RR’ showed high grain yield and good agronomic traits in Lavras and Incofidentes.

  15. Seed yield of radish as affected by uprooting time and root cutting

    Directory of Open Access Journals (Sweden)

    A. H. M. Shohidul Hoque

    2015-08-01

    Full Text Available The experiment was conducted at the Bangabandhu Sheikh Mujibur Rahman Agricultural University (BSMRAU, Gazipur, Bangladesh during November 2005 to April 2006 to study the seed production potentiality of BSMRAU developed open pollinated radish varieties (viz., BU Mula 1 and BU Mula 2 under two levels of root cutting (viz., one third and no cutup and three levels of uprooting namely 30, 40 and 50 days after sowing (DAS. Results revealed that both root cutting and uprooting days significantly influenced most of the characters pertaining to seed yield per plant. Root cutting delayed the flowering, pod initiation, maturation of siliqua and reduced plant height, number of branches per plant, number of siliqua per plant, and number of seeds per siliqua. The yields were also impaired by root cutting. In general, the entire yield components and seed yield were highly affected with the one third root cutting. Various uprooting days also had influenced these characters. In case of treatment combination of no cut and 30 days of uprooting there was a significant difference between the varieties. The variety BU Mula 2 produced better seed yield per plot than BU Mula 1. Also in both the varieties the 1/3rd cut treatment with 30 or 50 days uprooting sequence showed unsatisfied number of seeds per siliqua in comparison to the no cut treatment except 40 days uprooting.

  16. EVALUATION OF GRAIN SORGHUM CULTIVARS FOR DOUBLE CROPPING IN THE SOUTHWEST OF GOIÁS STATE, BRAZIL AVALIAÇÃO DE CULTIVARES DE SORGO GRANÍFERO NA SAFRINHA NO SUDOESTE DO ESTADO DE GOIÁS

    Directory of Open Access Journals (Sweden)

    Eduardo Bezerra de Morães

    2009-03-01

    Full Text Available

    height: 120%; text-decoration: none;" lang="pt-BR" align="justify">Sorghum is a crop of great importance for double cropping, in the Brazilian Central-West region. Within this region, in the Southwestern Goiás State, a research was conducted to select sorghum (Sorghum bicolor (L. Moench cultivars, in the municipalities of Montividiu, Rio Verde, and Santa Helena de Goiás. A randomized blocks design, with four replications, was used. The grain sorghum cultivars tested were: BR 304, 741, 822, Catuy, and the experimental hybrid V 00069. The cultivars were sown on March 5, 2005. The evaluated characteristics were: yield, weight of thousand grains, plant height, and flowering and maturation dates. The results showed the interaction genotype x environment for all evaluated characteristics. The region of Montividiu presented better potential for sorghum grain production. Early flowering and harvest allowed higher grain yields.

    height: 120%; text-decoration: none;" lang="pt-BR" align="justify"> 

    height: 120%; text-decoration: none;" lang="en-US" align="justify">

  17. Switchgrass cultivar EG1102

    Science.gov (United States)

    Bouton, Joseph H; Wood, Donald T

    2012-11-20

    A switchgrass cultivar designated EG1102 is disclosed. The invention relates to the seeds of switchgrass cultivar EG1102, to the plants of switchgrass EG1102, to plant parts of switchgrass cultivar EG1102 and to methods for producing a switchgrass plant produced by crossing switchgrass cultivar EG1102 with itself or with another switchgrass variety. The invention also relates to methods for producing a switchgrass plant containing in its genetic material one or more transgenes and to the transgenic switchgrass plants and plant parts produced by those methods. This invention also relates to switchgrass cultivars or breeding cultivars and plant parts derived from switchgrass variety EG1102, to methods for producing other switchgrass cultivars, lines or plant parts derived from switchgrass cultivar EG1102 and to the switchgrass plants, varieties, and their parts derived from use of those methods. The invention further relates to hybrid switchgrass seeds, plants and plant parts produced by crossing the cultivar EG1102 with another switchgrass cultivar.

  18. Study of Plant Growth Promoting Rhizobacteria (PGPR and Drought on Physiological Traits and Ultimate Yield of Cultivars of Oilseed Rape (Brassica spp. L.

    Directory of Open Access Journals (Sweden)

    pooya arvin

    2018-02-01

    Full Text Available Introduction Oilseed rape (Brassica spp L. is one of the valuable oilseed crops which has been attracting attention in recent years. Iran is located in a semi-arid region, and water shortage has caused problems, namely providing drinking water as much as water supply for crop production. Not only does Plant Growth Promoting Rhizobacteria (PGPR make plant growth stimulating hormones like Auxin and Gibberellin but also can ease stress conditions by producing ABA. Consequently, considering the current water shortage crisis in Iran, we took three main criteria into account: the roles of PGPRs in increasing resistance to abiotic stress, relief of drought effects, and the importance of cultivation of oilseed rape. The present research has been compiled to study drought and some Plant Growth Promoting Rhizobacteria (PGPR on Physiological Traits and Ultimate Yield of Cultivars of Oilseed Rape. Materials and Methods The current study was done on the basis of two simultaneous experiments (under stress and non-stress experiments during 2010- 2011 growing season at Agriculture and Natural Resources Research Station of Torogh, Mashhad is situated in East-North of Iran (36° N, 59° E, 1003 ASL . Two research sites (under stress and no-stress fields were selected beside each other. This region has a semi-arid climate (annual rainfall 286 mm. The experimental design was factorial based on randomized completely block design with three replications in each experiment. The first treatment was Plant Growth Promoting Rizobactria, including B0: no inoculation (control, B1: co-inoculation (Pseudomonas flourescens 169+P. putida 108, B2: inoculation with P. flourescens 169 and B3: inoculation with P. putida 108. Second treatment was cultivar, including Hayola401 and Hayola330 cultivars belong to Brassica napus, Parkland and Goldrush cultivars belong to B. rapa and BP18 and landrace cultivars belong to B.juncea .Greenness index, plant height, relative water content

  19. Breeding of cocksfoot cultivars with different maturity

    Directory of Open Access Journals (Sweden)

    Babić Snežana

    2017-01-01

    Full Text Available One of the most important criteria in breeding process of perennial grasses is maturity. Cultivars with different maturity play a very important role in utilization of perennial grasses, by providing the ability to create a mixture of different aspects utilization and time. The first grass species in Serbia whose breeding program involved this criterion was cocksfoot (Dactylis glomerata L.. In general cocksfoot is early to medium-early in maturity in comparison with other grasses and legumes, and that is mayor problem since in the optimum phase for cutting, cocksfoot is often earlier then other species in mixtures. As a result of this work, in the previous period, two cultivars of different maturity were released, Kruševačka 24 (K-24 and Kruševačka 25 (K-25. K-24 is medium and K-25 is late in maturity. New material is adapted to local agro-ecological conditions and productive in the same time. In breeding process of both cultivars initial material originated from autochthonous populations collected in eastern and central Serbia. Material from the wild flora is selected based on medium and late maturity which is already adapted and has good productivity. We applied the standard method of phenotypic recurrent selection with the creation of synthetic varieties by polycross.

  20. Analysis of bit-rock interaction during stick-slip vibrations using PDC cutting force model

    Energy Technology Data Exchange (ETDEWEB)

    Patil, P.A.; Teodoriu, C. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). ITE

    2013-08-01

    Drillstring vibration is one of the limiting factors maximizing the drilling performance and also causes premature failure of drillstring components. Polycrystalline diamond compact (PDC) bit enhances the overall drilling performance giving the best rate of penetrations with less cost per foot but the PDC bits are more susceptible to the stick slip phenomena which results in high fluctuations of bit rotational speed. Based on the torsional drillstring model developed using Matlab/Simulink for analyzing the parametric influence on stick-slip vibrations due to drilling parameters and drillstring properties, the study of relations between weight on bit, torque on bit, bit speed, rate of penetration and friction coefficient have been analyzed. While drilling with the PDC bits, the bit-rock interaction has been characterized by cutting forces and the frictional forces. The torque on bit and the weight on bit have both the cutting component and the frictional component when resolved in horizontal and vertical direction. The paper considers that the bit is undergoing stick-slip vibrations while analyzing the bit-rock interaction of the PDC bit. The Matlab/Simulink bit-rock interaction model has been developed which gives the average cutting torque, T{sub c}, and friction torque, T{sub f}, values on cutters as well as corresponding average weight transferred by the cutting face, W{sub c}, and the wear flat face, W{sub f}, of the cutters value due to friction.

  1. Drill cuttings mount formation study

    Science.gov (United States)

    Teh, Su Yean; Koh, Hock Lye

    2014-07-01

    Oil, Gas and Energy sector has been identified as an essential driving force in the Malaysian Economic Transformation Programs (ETP). Recently confirmed discovery of many offshore oil and gas deposits in Malaysian waters has ignited new confidence in this sector. However, this has also spurred intense interest on safeguarding the health and environment of coastal waters in Malaysia from adverse impact resulting from offshore oil and gas production operation. Offshore discharge of spent drilling mud and rock cuttings is the least expensive and simplest option to dispose of large volumes of drilling wastes. But this onsite offshore disposal may have adverse environmental impacts on the water column and the seabed. It may also pose occupational health hazards to the workers living in the offshore platforms. It is therefore important to model the transport and deposition of drilling mud and rock cuttings in the sea to enable proper assessment of their adverse impacts on the environment and the workers. Further, accumulation of drill particles on the seabed may impede proper operation of pipelines on the seabed. In this paper, we present an in-house application model TUNA-PT developed to cater to local oil and gas industry needs to simulate the dispersion and mount formation of drill cuttings by offshore oil and gas exploration and production platforms. Using available data on Malaysian coastal waters, simulation analyses project a pile formation on the seabed with a maximum height of about 1 m and pile radius of around 30 to 50 m. Simulated pile heights are not sensitive to the heights of release of the cuttings as the sensitivity has been mitigated by the depth of water.

  2. Yield response of winter wheat cultivars to environments modeled by different variance-covariance structures in linear mixed models

    Energy Technology Data Exchange (ETDEWEB)

    Studnicki, M.; Mądry, W.; Noras, K.; Wójcik-Gront, E.; Gacek, E.

    2016-11-01

    The main objectives of multi-environmental trials (METs) are to assess cultivar adaptation patterns under different environmental conditions and to investigate genotype by environment (G×E) interactions. Linear mixed models (LMMs) with more complex variance-covariance structures have become recognized and widely used for analyzing METs data. Best practice in METs analysis is to carry out a comparison of competing models with different variance-covariance structures. Improperly chosen variance-covariance structures may lead to biased estimation of means resulting in incorrect conclusions. In this work we focused on adaptive response of cultivars on the environments modeled by the LMMs with different variance-covariance structures. We identified possible limitations of inference when using an inadequate variance-covariance structure. In the presented study we used the dataset on grain yield for 63 winter wheat cultivars, evaluated across 18 locations, during three growing seasons (2008/2009-2010/2011) from the Polish Post-registration Variety Testing System. For the evaluation of variance-covariance structures and the description of cultivars adaptation to environments, we calculated adjusted means for the combination of cultivar and location in models with different variance-covariance structures. We concluded that in order to fully describe cultivars adaptive patterns modelers should use the unrestricted variance-covariance structure. The restricted compound symmetry structure may interfere with proper interpretation of cultivars adaptive patterns. We found, that the factor-analytic structure is also a good tool to describe cultivars reaction on environments, and it can be successfully used in METs data after determining the optimal component number for each dataset. (Author)

  3. Rooting, growth, and color mutation of poinsettias affected by gamma radiation

    International Nuclear Information System (INIS)

    Lee, Eun Kyung; Kim, Won Hee; Kim, Seung Tae; Kang, Si Yong

    2010-01-01

    This experiment was carried out to investigate the effects of gamma-radiation on the rooting, growth, and color mutation in poinsettia. Using 10 poinsettia varieties ('Lollipop', 'Little Peace', 'Happy Day', 'Early Bird', 'Pixy Red', 'Happy Time', 'Heidi', 'Red Bell', 'Clara', and 'Scarlet') bred by National Institute of Horticultural and Herbal Science, 100 Gy of gamma ray was irradiated at the stage of callused cuttings. Four weeks after sticking cuttings in the rooting media, 8 cultivars showed 100% of root formation, but 'Early Bird' rooted 24.4% and even died off during the cutting propagation. After planting rooted cuttings, survival rate until flowering time varied among irradiated cultivars. While 'Pixy Red' and 'Heidi' survived about 98%, 'Clara', 'Happy Day', and 'Early Bird' survived lesser than 30%. All irradiated plants showed remarkably shorter plant height, lesser branch numbers than non-irradiated control plants. Thirty color mutants were obtained among 281 plants survived until flowering time. Nine were complete color mutated branches, whereas 21 mutants were partially color mutated bracts and transitional leaves. Color patterns mutated by 100 Gy of gamma ray were divided into pink, hot pink, light red and spotted (pink spots with red main color). Pink mutants were commonly obtained. Complete color mutants were discovered from 4 plants of 'Pixy Red', 2 plants of 'Red Bell' and 3 plants of Lollipop

  4. Characteristics of commercially recommending sesame mutant cultivars through induced mutations by different sources of radiation and chemical in the Republic of Korea

    International Nuclear Information System (INIS)

    Kang, Churl Whan

    2001-01-01

    The sesame acreage in Korea has grown 2.5 times in the last two decades as the result of recommending sesame mutant cultivars and polyethylene mulch technique newly developed since 1978. The mutation was induced by X-ray irradiation at 200 Gy yielding a variety named 'Ahnsankkae' known for early ripeness, white color of seed coat, tolerance for diseases. 'Suwon 128' is a dwarf mutant bred through sodium azide and known for strong lodging resistance, dense and lower first capsule set and dense planting adaptability toward mechanized culture against typhoon. Seven mutant recommending cultivars of sesame are compared with respect to their qualitative and quantitative characteristics based on passport data regarding different mutagen sources of radiations and chemicals published by Committee New Recommending Cultivars on the Crops. Breeding sources are summarized: 5 out of 7 sources are through radiation (X-rays, γ-rays, and neutrons) and the rest 2 through chemicals. Their growth characteristics such as flowering date, maturing date, plant height, length-capsule bearing stem, disease and lodging resistance, oil content, and yield ability are also presented. (S. Ohno)

  5. Effect of Planting Date on Reducing Growth Period of Spring Safflower Cultivars in Tabriz Cold and Semi-arid Climate

    Directory of Open Access Journals (Sweden)

    B Pasban Eslam

    2018-02-01

    were used to determine plant height and seed yield components. Also, seed oil content was determined by nuclear magnetic resonance (NMR method. Results and Discussion The results indicated that interaction effect of year, planting date and cultivar was significant on the plant height, paniculum number per plant, seed number per paniculum, 1000 seed weight , seed yield and seed oil percent. A delay in planting date from 30 March, significantly reduced yield components, seed and oil yields. Soffeh cultivar had the greater plant height and Goldasht and Sina were located in the next rank. Goldasht cultivar had higher seed yield with the largest capitulum diameter and the most 1000 seed weight. The highest oil yield was belonged to the Soffeh (1161 kg ha-1 and Goldasht cultivar (754 kg per ha1 in the first and second year, respectively. There were positive significant correlations between capitulum diameter, 1000 seed weight and seed yield. The Goldasht and Soffeh cultivars provided acceptable performance that were seen appropriate for cultivation in Tabriz cold and semi-arid plain. Delayed planting led to significant decrease in seed and oil yields and therefore is not be recommended. Conclusions The results of this study indicated that the most appropriate date to cultivate spring safflower in Tabriz cold and semi-arid plain is 30 March and planting is not recommended at the late season. Soffeh and Goldasht cultivars are suitable for cultivation in this region.

  6. Assessment of Cultivar Distinctness in Alfalfa: A Comparison of Genotyping-by-Sequencing, Simple-Sequence Repeat Marker, and Morphophysiological Observations

    Directory of Open Access Journals (Sweden)

    Paolo Annicchiarico

    2016-07-01

    Full Text Available Cultivar registration agencies typically require morphophysiological trait-based distinctness of candidate cultivars. This requirement is difficult to achieve for cultivars of major perennial forages because of their genetic structure and ever-increasing number of registered material, leading to possible rejection of agronomically valuable cultivars. This study aimed to explore the value of molecular markers applied to replicated bulked plants (three bulks of 100 independent plants each per cultivar to assess alfalfa ( L. subsp. cultivar distinctness. We compared genotyping-by-sequencing information based on 2902 polymorphic single-nucleotide polymorphism (SNP markers (>30 reads per DNA sample with morphophysiological information based on 11 traits and with simple-sequence repeat (SSR marker information from 41 polymorphic markers for their ability to distinguish 11 alfalfa landraces representative of the germplasm from northern Italy. Three molecular criteria, one based on cultivar differences for individual SSR bands and two based on overall SNP marker variation assessed either by statistically significant cultivar differences on principal component axes or discriminant analysis, distinctly outperformed the morphophysiological criterion. Combining the morphophysiological criterion with either molecular marker method increased discrimination among cultivars, since morphophysiological diversity was unrelated to SSR marker-based diversity ( = 0.04 and poorly related to SNP marker-based diversity ( = 0.23, < 0.15. The criterion based on statistically significant SNP allele frequency differences was less discriminating than morphophysiological variation. Marker-based distinctness, which can be assessed at low cost and without interactions with testing conditions, could validly substitute for (or complement morphophysiological distinctness in alfalfa cultivar registration schemes. It also has interest in sui generis registration systems aimed at

  7. Depth-of-Interaction Compensation Using a Focused-Cut Scintillator for a Pinhole Gamma Camera

    Science.gov (United States)

    Alhassen, Fares; Kudrolli, Haris; Singh, Bipin; Kim, Sangtaek; Seo, Youngho; Gould, Robert G.; Nagarkar, Vivek V.

    2011-06-01

    Preclinical SPECT offers a powerful means to understand the molecular pathways of drug interactions in animal models by discovering and testing new pharmaceuticals and therapies for potential clinical applications. A combination of high spatial resolution and sensitivity are required in order to map radiotracer uptake within small animals. Pinhole collimators have been investigated, as they offer high resolution by means of image magnification. One of the limitations of pinhole geometries is that increased magnification causes some rays to travel through the detection scintillator at steep angles, introducing parallax errors due to variable depth-of-interaction in scintillator material, especially towards the edges of the detector field of view. These parallax errors ultimately limit the resolution of pinhole preclinical SPECT systems, especially for higher energy isotopes that can easily penetrate through millimeters of scintillator material. A pixellated, focused-cut (FC) scintillator, with its pixels laser-cut so that they are collinear with incoming rays, can potentially compensate for these parallax errors and thus improve the system resolution. We performed the first experimental evaluation of a newly developed focused-cut scintillator. We scanned a Tc-99 m source across the field of view of pinhole gamma camera with a continuous scintillator, a conventional “straight-cut” (SC) pixellated scintillator, and a focused-cut scintillator, each coupled to an electron-multiplying charge coupled device (EMCCD) detector by a fiber-optic taper, and compared the measured full-width half-maximum (FWHM) values. We show that the FWHMs of the focused-cut scintillator projections are comparable to the FWHMs of the thinner SC scintillator, indicating the effectiveness of the focused-cut scintillator in compensating parallax errors.

  8. Evaluating Potential Production of Mid-Late Maturing Minituber of Potato Cultivars and Promising Clones under Aeroponic System

    Directory of Open Access Journals (Sweden)

    D. HassanPanah

    2014-10-01

    Full Text Available This study was performed to investigate potential production of mid-late maturing promising mini-tuber clones and cultivars under aeroponic system during 2011-2013 in both laboratory and greenhouse of Ardabil Sabalan Behparvar Company. Five clones and cultivars (three promising clones 397009-3, 397082-10 and 397081-1, and two cultivars, Khavaran and Agria were evaluated in completely randomized designs with three replications. During growing period and after harvesting the crop some important traits like plant height, main stem number per plant, mini-tuber number and weight per square meter, mean mini-tuber weight per square meter and storability of mini-tubers were measured. Analysis of variance showed that mini-tuber number and weight per square meter, mean mini-tuber weight per square meter, plant height and main stem number per plant among clones and cultivars were significantly different. The mid-late maturity promising clones of 397081-1 and 397009-3 produced higher mini-tuber number per square meter (2766 and 2141 mini-tubers, respectively, mini-tuber weight per square meter (11400 and 16500 g, respectively than the remaining types. Mid-late maturity promising clone of 397081-1 also produced higher mean mini-tuber weight per square meter (5.59 g and plant height (174 cm as compared with the others. The differences per square meter in the number of mini-tuber of mid-late maturing promising clones of 397081-1 and 397009-3 with Agria cultivar were about 1166 and 541, respectively. Mean mini-tuber weight per square meter in aeroponic system was 6.16 grams.

  9. Selection of Near Optimal Laser Cutting Parameters in CO2 Laser Cutting by the Taguchi Method

    Directory of Open Access Journals (Sweden)

    Miloš MADIĆ

    2013-12-01

    Full Text Available Identification of laser cutting conditions that are insensitive to parameter variations and noise is of great importance. This paper demonstrates the application of Taguchi method for optimization of surface roughness in CO2 laser cutting of stainless steel. The laser cutting experiment was planned and conducted according to the Taguchi’s experimental design using the L27 orthogonal array. Four laser cutting parameters such as laser power, cutting speed, assist gas pressure, and focus position were considered in the experiment. Using the analysis of means and analysis of variance, the significant laser cutting parameters were identified, and subsequently the optimal combination of laser cutting parameter levels was determined. The results showed that the cutting speed is the most significant parameter affecting the surface roughness whereas the influence of the assist gas pressure can be neglected. It was observed, however, that interaction effects have predominant influence over the main effects on the surface roughness.

  10. Effect of Salinity on Growth and Physiological Parameters of Four Olive (OleaeuropaeaL. Cultivars underGreenhouse Conditions

    Directory of Open Access Journals (Sweden)

    Farzaneh Olyaei

    2017-02-01

    . Results and Discussion:The results showed that salt stress and cultivar hadsignificant effects on all of vegetative and physiological parameters. Injury rating valueof plants wasfound to increase significantly as the salt concentration was raised. Among the cultivars, the highest injury rating value (2.75 belonged to Amigdal cultivar, while the lowest means (2.00 was related to Dakal cultivar. By increasing the salinity level, stem heightincreasing ratesignificantly decreased. The lowest means (18.17% belonged to 200 mMNaCl treatment, showing 81.83% decrease compared with control. Among the cultivars, Zard showed the highest means of increase in stem height (71.75%. Leaf area influenced significantly by salinity, sothat the lowest means of leaf area (35.05% was recorded for200 mMNaCl treatment, showing a 69.91% decrease compared with the control. The highest leaf area belonged to Shiraz cultivar, which had a significant difference with Zard and Amigdal cultivars. Compared with the control, salinity caused 50.83% and 54.36% decreases in shoot fresh and dry weight in 200 mMNaCl, respectively. The highest shoot fresh and dry weightswere recorded forZard cultivar. The lowest shoot fresh and dry weights were observed forAmigdal cultivar.Increment of salinity concentration significantly declined root fresh and dry weight. Among the cultivars, the highest means of root fresh weightbelonged to Amigdal cultivar, whereas the lowest was related to Shiraz cultivar. The highest and lowest root dry weightswere observed forDakal and Amigdal cultivars, respectively.Salinity significantly decreased relative water content.The lowest leaf relative water content (66.04% was recorded in 200 mMNaCl treatment, showing a 23.43% decrease compared with the control.Zard cultivar showed the highestleafrelative water content. Salinity stress decreased chlorophyll fluorescence in leaves of salt-treated olive plants. At 200 mMNaCl, leaf chlorophyll fluorescence was minimal as compared to control and

  11. Interaction Effects of Planting Date and Weed Competition on Yield and Yield Components of Three white Bean Cultivars in Semirom

    Directory of Open Access Journals (Sweden)

    A. Yadavi

    2012-06-01

    Full Text Available Unsuitable planting and weed competition are the most important factors that greatly reduce the yield of bean. In order to study the effect of planting date on yield and yield components of three white bean cultivars in weed infest and weed free condition a factorial experiment with randomized complete block design and three replications was carried out at Semirom in 2009. The treatments were planting date (May10, May 25 and June 9 and white bean cultivars (Shekofa, Pak and Daneshkade and two levels of weed infestation (weedy and weed free. Results showed that planting date, weed competition and cultivars had significant effects on yield and yield components of white bean. The 30-day delay in planting date reduced the number of pods per plant, seeds per pod, 100 seed weight and biological yield of white bean cultivars, 22.5, 18, 20.1 and 22.5 percent respectively. Also weed competition, reduced the number of seeds per pod, 100 seed weight and biological yield respectively by 13.5, 5.7 and 27.1 percent. Result of planting date and weed competition interaction effects indicated that the weed competition decreased grain yield (53% in third planting date more than others and delay in planting date was companion with increasing weed density and dry weight in flowering stage of bean. Also Shekofa cultivar had highest grain yield (3379 kg/ha at the first planting date and weed free condition.

  12. Yield Potential of Hemp (Cannabis sativa L.) Cultivars in Denmark

    DEFF Research Database (Denmark)

    Deleuran, Lise Christina; Flengmark, Poul Kristiansen

    2005-01-01

    In order to determine the yield potential of fibre hemp in Denmark, defined as seed yield, biomass, stem and fibre production, five cultivars were evaluated in field trials at two sites during 1998-2000. The total dry matter yield, stem yield, fibre yield, fibre percent, plant height, and seed...

  13. Performance of soy cultivars in the south of Minas Gerais State, Brazil

    Directory of Open Access Journals (Sweden)

    Elaine Cristina Batista

    2017-11-01

    behavior of 23 soy cultivars in the soil-climatic conditions of the south region of Minas Gerais State (MG, Brazil, in the municipality of Inconfidentes. The evaluated traits were grain yield, plant height, height of insertion of the first legume and lodging. The experiments were conducted on the 2013/2014 and 2014/2015 harvests, adopting a randomized block design with three replicates and 23 treatments, which were constituted by the following cultivars: FAVORITA RR, BRS MG 760SRR, NA 5909 RG, NA 7200 RR, CD 2630, CD 250, NA 7620 RR, CD 2737, TMG 123, V-MAX RR, P 98Y11 RR, NS 7100 RR, BMX Potencia, Anta 82 RR, CD 237, V-TOP, TMG 1176 RR, TMG 1174 RR, TMG 1179 RR, TMG 1181 RR, BMX Força, Monsoy 7211 RR and BRS MG 780 RR. Of the studied cultivars, those that most stood out for the traits evaluated in the conditions of Inconfidentes (MG were TMG 1179 RR (48.6 bags of 60 kg ha-1, NA 7200 RR (45.6 bags, CD 2737 (41.1 bags, CD 237 (41 bags and BRS MG 760 SRR (40.6 bags, all of which displayed satisfactory conditions for mechanical harvesting, demonstrating the good performance of the crop in the south region of Minas Gerais State.

  14. Effect of various levels of nitrogen fertilizer on some vegetative growth attributes of pea ( pisum sativum L.) cultivars

    International Nuclear Information System (INIS)

    Achakzai, A.K.K.

    2012-01-01

    A field experiment was conducted for 2 consecutive growing years on few growth characteristics of four pea cultivars viz., Arkel, Climax, Green Feast and Olympia in response to different levels of N fertilizer under the climatic conditions of district Mastung, Balochistan. Six N fertilizer levels (0, 25, 50, 75, 100 and 125 kg N ha/sup -1/) plus a constant dose of 60+40 kg P/sub 2/O/sub 5/ and K/sub 2/ O ha/sub -1/ were prepared, and designated as T/sub 1/ to T/sub 7/, respectively. These N levels were applied to each sub-plot (except T/sub 1/ and T/sub 2/) in two split doses first at the time of flowering and second at the time of pod formation to quantify how much N fertiliser's required by different pea cultivars to realize the highest growth and yield. Results exhibited that in response to various levels of added N fertilizer, all mentioned growth attributes were found to be highly significant (P<0.01). However, cultivars response was found significant only for secondary branches plant/sub -1/, plant height and shoot moisture contents. A maximum number of primary branches plant/sup -1/ (6.94), secondary branches plant/sub -1/ (10.72), plant height (69.77 cm), number of leaves plant/sup -1/ (19.75), leaf length (11.81 cm) and shoot moisture contents (571.0 g kg/sup -1/) was recorded with application of 100 kg N ha/sup -1/. The interaction between fertilizer and pea cultivars was found non-significant for all mentioned attributes in the trial. Results further revealed that all growth parameters were slightly to highly significant and positively correlated among themselves as well as with their fresh pod yields. These attributes could be used a suitable selection criteria for predicting the fresh pod yield and also for breeding purposes in peas. (author)

  15. Solanum cultivar responses to arbuscular mycorrhizal fungi: growth ...

    African Journals Online (AJOL)

    A greenhouse experiment was carried out in a sandy soil with a low available phosphorus to evaluate responsiveness of four Solanum aethiopicum cultivars to indigenous arbuscular mycorrhizal fungi. Results showed clear interaction between genetic variability of cultivars and fungal isolates on shoot biomass and on ...

  16. Epistatic association mapping in homozygous crop cultivars.

    Directory of Open Access Journals (Sweden)

    Hai-Yan Lü

    Full Text Available The genetic dissection of complex traits plays a crucial role in crop breeding. However, genetic analysis and crop breeding have heretofore been performed separately. In this study, we designed a new approach that integrates epistatic association analysis in crop cultivars with breeding by design. First, we proposed an epistatic association mapping (EAM approach in homozygous crop cultivars. The phenotypic values of complex traits, along with molecular marker information, were used to perform EAM. In our EAM, all the main-effect quantitative trait loci (QTLs, environmental effects, QTL-by-environment interactions and QTL-by-QTL interactions were included in a full model and estimated by empirical Bayes approach. A series of Monte Carlo simulations was performed to confirm the reliability of the new method. Next, the information from all detected QTLs was used to mine novel alleles for each locus and to design elite cross combination. Finally, the new approach was adopted to dissect the genetic basis of seed length in 215 soybean cultivars obtained, by stratified random sampling, from 6 geographic ecotypes in China. As a result, 19 main-effect QTLs and 3 epistatic QTLs were identified, more than 10 novel alleles were mined and 3 elite parental combinations, such as Daqingdou and Zhengzhou790034, were predicted.

  17. A cut-cell finite volume - finite element coupling approach for fluid-structure interaction in compressible flow

    Science.gov (United States)

    Pasquariello, Vito; Hammerl, Georg; Örley, Felix; Hickel, Stefan; Danowski, Caroline; Popp, Alexander; Wall, Wolfgang A.; Adams, Nikolaus A.

    2016-02-01

    We present a loosely coupled approach for the solution of fluid-structure interaction problems between a compressible flow and a deformable structure. The method is based on staggered Dirichlet-Neumann partitioning. The interface motion in the Eulerian frame is accounted for by a conservative cut-cell Immersed Boundary method. The present approach enables sub-cell resolution by considering individual cut-elements within a single fluid cell, which guarantees an accurate representation of the time-varying solid interface. The cut-cell procedure inevitably leads to non-matching interfaces, demanding for a special treatment. A Mortar method is chosen in order to obtain a conservative and consistent load transfer. We validate our method by investigating two-dimensional test cases comprising a shock-loaded rigid cylinder and a deformable panel. Moreover, the aeroelastic instability of a thin plate structure is studied with a focus on the prediction of flutter onset. Finally, we propose a three-dimensional fluid-structure interaction test case of a flexible inflated thin shell interacting with a shock wave involving large and complex structural deformations.

  18. Analysis of early events in the interaction between Fusarium graminearum and the susceptible barley (Hordeum vulgare) cultivar Scarlett

    DEFF Research Database (Denmark)

    Yang, Fen; Jensen, J.D.; Svensson, Birte

    2010-01-01

    A proteomic analysis was conducted to map the events during the initial stages of the interaction between the fungal pathogen Fusarium graminearum and the susceptible barley cultivar Scarlett. Quantification of fungal DNA demonstrated a sharp increase in fungal biomass in barley spikelets at 3 da...

  19. Influence of sowing dates on phenological development and yield of dual purpose wheat cultivars

    International Nuclear Information System (INIS)

    Munsif, F.; Arif, M.; Ali, K.

    2015-01-01

    Dual-purpose wheat is getting recognition among community in diverse farming systems. Success of the system depends on management decisions regarding appropriate sowing dates, choice of cultivars, harvesting time and stage. A comprehensive understanding of how these factors influence the growth and phenology of dual purpose wheat is needed for comparison of grain only wheat to dual purpose system to feed the ever increasing population under this system. The existing higher yielding varieties (Saleem-2000, Bathoor-2007, Fakhre Sarhad-99, Uqab-2000, Siran-2008, and Ghaznavi-98) of wheat were sown on various planting dates from early to normal (15th, 30th October and 14th November) and were given cut after 70 days of sowing. The experiment was arranged in randomized complete block design having split plot arrangement with three replications. Results of the study indicated that booting, heading and physiological maturity were significantly influenced by planting dates, among the cultivars and cutting imposed 70 days after sowing. Mid October sowing prolonged booting, heading, anthesis, maturity and had long stature plants and higher grain yield than sowing in mid November. Uqab-2000 booted, headed and reached to anthesis and maturity earlier followed by Ghaznavi-98, Bathoor-2007 and Saleem-2000. Uqab-2000 and Siran-2008 had higher grain yield than other cultivars. Booting, heading, anthesis and maturity were significantly delayed in cutting as compared to no cut plots. Wheat varieties Bathoor-2007, Uqab-2000 and Fakhre Sarhad-99 produced taller plants compared to Saleem-2000. It is concluded that early sowing on mid October had prolonged phenological traits and higher yield of wheat with long stature plants than later sowing (15th November) and variety Fakhre Sarhad-99 unlike Uqab-2000 was late with respect to phenological development. Cutting prior to stem elongation had not delayed the maturity from three days without substantial yield reduction which revealed that

  20. Genetic similarity among strawberry cultivars assessed by RAPD and ISSR markers

    Directory of Open Access Journals (Sweden)

    Rafael Gustavo Ferreira Morales

    2011-12-01

    Full Text Available Most strawberry (Fragaria × ananassa Duchesne cultivars used in Brazil are developed in other countries, it became clear the need to start the strawberry breeding program in the country. To start a breeding program is necessary the genetic characterization of the germplasm available. Molecular markers are important tools that can be used for this purpose. The objectives of the present study were to assess the genetic similarity among 11 strawberry cultivars using RAPD and ISSR molecular markers and to indicate the possible promising crosses. The DNA of the eleven strawberry cultivars was extracted and amplified by PCR with RAPD and ISSR primers. The DNA fragments were separated in agarose gel for the RAPD markers and in polyacrylamide gel for the ISSR markers. The genetic similarity matrix was estimated by the Jaccard coefficient. Based on this matrix, the cultivars were grouped using the UPGMA method. The dendogram generated by the RAPD markers distributed the cultivars in three groups while the ISSR markers generated two groups. There was no direct relationship between the marker groups when the two types of markers were compared. The grouping proposed by the ISSR markers was more coherent with the origin and the genealogy of the cultivars than that proposed by the RAPD markers, and it can be considered the most efficient method for the study of genetic divergence in strawberry. The most promising crosses, based on the genetic divergence estimated from the RAPD and ISSR molecular data were between the Tudla and Ventana and the Oso Grande and Ventana cultivars, respectively.

  1. Soaking grapevine cuttings in water: a potential source of cross contamination by micro-organisms

    Directory of Open Access Journals (Sweden)

    Helen WAITE

    2013-09-01

    Full Text Available Grapevine nurseries soak cuttings in water during propagation to compensate for dehydration and promote root initiation. However, trunk disease pathogens have been isolated from soaking water, indicating cross contamination. Cuttings of Vitis vinifera cv. Sunmuscat and V. berlandieri x V. rupestris rootstock cv. 140 Ruggeri were immersed in sterilized, deionised water for 1, 2, 4, 8 and 16 h. The soaking water was cultured (25°C for 3 days on non-specific and specific media for fungi and bacteria. The base of each cutting was debarked and trimmed and three 3 mm thick, contiguous, transverse slices of wood cultured at 25°C for 3 days. The soaking water for both cultivars became contaminated with microorganisms within the first hour. Numbers of fungi iso-lated from the wood slices soaked for one hour were significantly greater than those from non-soaked cuttings. The number of bacterial colonies growing from the wood slices increased after soaking for 2‒4 h in Sunmuscat. In a second experiment Shiraz cuttings were soaked for 1, 2, 4, 8 and 24 h. The soaking water became contaminated within the first hour but only the bacterial count increased significantly over time. Microorganisms also established on the container surfaces within the first hour although there were no significant increases over 24 h. These results confirm that soaking cuttings is a potential cause of cross contamination and demonstrate contamination of cuttings occurs after relatively short periods of soaking. Avoiding exposing cuttings to water will reduce the transmission of trunk diseases in propagation.

  2. Evaluation of growth and gas exchange rates of two local saudi wheat cultivars grown under heat stress conditions

    International Nuclear Information System (INIS)

    Boutraa, T.; Akhkha, A.; Shoaibi, A.K.

    2015-01-01

    The present study investigated the effects of three temperature regimes, low (20 degree C), moderate (25 degree C) and high (30 degree C), on growth and physiological parameters of two local Saudi wheat (Triticum durum) cultivars, Hab-Ahmar and Algaimi. Plants were grown under controlled environment in growth chambers. After four weeks plants were harvested and the following growth parameters were measured; plant height, number of tillers, leaf area, root length, fresh and dry weight. Physiological traits include chlorophyll content, photosynthesis rates, stomatal conductance, dark respiration and chlorophyll fluorescence parameters; Fo, Fm and Fv/Fm. In cultivar Hab-Ahmar, moderate and high temperatures caused significant decrease in most growth and physiological parameters such as plant height, number of tillers, leaf area, fresh and dry weight, chlorophyll content, photosynthesis rates, stomatal conductance, dark respiration and the maximum quantum yield of photosystem II (Fv/Fm). In contrast, cv. Algaimi was shown to be more thermotolerant to moderate and high temperatures, with the exception of some growth parameters that were decreased. Unlike cultivar Hab-Ahmar, cultivar Algaimi had an increased rate of dark respiration when temperature was high (30 degree C). Stomatal behavior is shown to be positively correlated with the rates of photosynthesis in both cultivars; however, in cultivar Hab-Ahmar such correlation decreased as temperature increased. (author)

  3. Gamma radiosensitivity of a common bean cultivar

    International Nuclear Information System (INIS)

    Colaco, W.; Martinez, C.R.

    1995-01-01

    A preliminary experiment was conducted to evaluate the radiosensitivity of common bean (Phaseolous vulgaris L.), cultivar to gamma rays from a 60 Co source. Sets of seeds (60 seed/sample) irradiated with 50, 100, 150, 200, and 250 Gy, were compared to a control without irradiation (0 Gy), under greenhouse conditions. The radiosensitivity was evaluated through seedling height reduction, determined at 15 days after emergence (DAE), and also through seedling survival, root length, and dry matter production of leaves, shoots and roots. Seedling height was significantly reduced for the treatments with 150 and 250 Gy, in relation to the control. The dose causing reduction of 50% seedling height was between 150 and 200 Gy. Survival rates corresponding to these doses, were, respectively, 85% and 60%. Root length and dry matter of leaves, shoots and roots, were inversely related to the doses. (author). 15 refs, 3 figs, 1 tab

  4. Productive and vegetative behavior of olive cultivars in super high-density olive grove

    Directory of Open Access Journals (Sweden)

    Primo Proietti

    2015-02-01

    Full Text Available In recent years, there has been an increase in interest in super high-density (SHD olive (Olea europaea L. groves because they offer early entry into production, increased productivity and the possibility of using modified mechanical vine harvesters. This study was carried out in a young SHD olive grove to examine vegetative, histo-anatomical and productive characteristics and oil quality of the Spanish Arbequina and Italian Maurino and Leccino cultivars, characterized by low, low-to-medium and high vigor, respectively. Arbequina had low vigor and limited development in height and width, as well as a high leaf/wood ratio. Maurino had a canopy volume similar to that of Arbequina and, despite a great tendency to grow in height, had low vigor, a rather compact vegetative habitus, but good lighting in the canopy and high production efficiency. In Maurino, a greater palisade parenchyma height and a larger exposed lateral surface area of the palisade parenchyma cells were observed. In the fourth year after planting, fruit production of Arbequina was about 30 % less than Leccino and Maurino. The oil content on a dry weight basis was slightly higher in Arbequina and Maurino than in Leccino. Oil quality was good for all cultivars.

  5. History of wheat cultivars released by Embrapa in forty years of research

    Directory of Open Access Journals (Sweden)

    Eduardo Caierão

    2014-11-01

    Full Text Available In forty years of genetic breeding of wheat, Embrapa (Brazilian Agricultural Research Corporation has developed over a hundred new cultivars for different regions of Brazil. Information regarding identification of these cultivars is often requested from Embrapa breeders. Data on year of release, name of pre-commercial line, the cross made, and the company unit responsible for indication of the cultivar are not always easily accessible and are often scattered throughout different documents. The aim of this study was to conduct a historical survey of all the wheat cultivars released by Embrapa, aggregating the information in a single document. Since 1974, Embrapa has released 112 wheat cultivars, including 12 by Embrapa Soybean - CNPSo (Londrina, PR, 14 by Embrapa Cerrado - CPAC (Brasília, DF, 9 by Embrapa Agropecuária Oeste - CPAO (Dourados, MS, and 77 by Embrapa Wheat - CNPT (Passo Fundo, RS.

  6. DESEMPENHO VEGETATIVO E PRODUTIVO DE CULTIVARES DE MANDIOCA (Manihot esculenta Crantz A PARTIR DE MANIVAS COM DIFERENTES DIÂMETROS

    Directory of Open Access Journals (Sweden)

    G.M.S. CÂMARA

    1998-05-01

    .This research deals with the viability study of using stem cuttings with three different diameters, related to three different positions in the cassava plant (Manihot esculenta Crantz, and evaluating the effects of such stem cuttings on the emergence, velocity, number and weight of tuberous roots per plant and yield of three cassava cultivars. The field research was conducted in Piracicaba, SP, Brazil, during two years, from September 23, 1980 to July 23, 1981, and September 1, 1981 to July 20, 1982. The mature and healthy stem cuttings were obtained from 12 month old plants of the Mantiqueira, Jaçanã and Pirassununga cultivars. These cuttings (20 cm long were divided into three diameter size classes: 2.6 ± .2 cm, 2.0 ± .2 cm and 1.4 ± .2 cm, representing stem cuttings taken from the main stem, the primary and the secondary ramification of the mother plants, respectively. The experimental design was a 3 x 3 factorial in randomized blocks with nine treatments in five blocks. The following conclusions are based on the results obtained: 1. The stem cutting vigor is more significantly shown in the stage of plant emergence. 2. Refering to the initial phases of the development, stem cuttings with 2.0 ± .2 cm or 2.6 ± .2 cm of diameters are prefered. 3. A smaller number of tuberous root yield per plant is compensated by a major tuberous root weight. 4. Neither stem cutting diameter nor stem cutting position influenced on root production per area. 5. The three cultivars used in the experiment showed a high root yield, and the cultivar Mantiqueira was the most productive.

  7. Characteristics of commercially recommending sesame mutant cultivars through induced mutations by different sources of radiation and chemical in the Republic of Korea

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Churl Whan [National Crop Experiment Station, Sodundong Suwon (Korea)

    2001-03-01

    The sesame acreage in Korea has grown 2.5 times in the last two decades as the result of recommending sesame mutant cultivars and polyethylene mulch technique newly developed since 1978. The mutation was induced by X-ray irradiation at 200 Gy yielding a variety named 'Ahnsankkae' known for early ripeness, white color of seed coat, tolerance for diseases. 'Suwon 128' is a dwarf mutant bred through sodium azide and known for strong lodging resistance, dense and lower first capsule set and dense planting adaptability toward mechanized culture against typhoon. Seven mutant recommending cultivars of sesame are compared with respect to their qualitative and quantitative characteristics based on passport data regarding different mutagen sources of radiations and chemicals published by Committee New Recommending Cultivars on the Crops. Breeding sources are summarized: 5 out of 7 sources are through radiation (X-rays, {gamma}-rays, and neutrons) and the rest 2 through chemicals. Their growth characteristics such as flowering date, maturing date, plant height, length-capsule bearing stem, disease and lodging resistance, oil content, and yield ability are also presented. (S. Ohno)

  8. Whitefly (Paraleyrodes sp. preference for avocado cultivars (Persea americana Mill. in Fresno, Tolima

    Directory of Open Access Journals (Sweden)

    Paola Vanessa Sierra

    2014-07-01

    Full Text Available The whitefly is a major pest that affects avocado and there is not enough information about the biolog y and management of this insect in Colombia. In this paper the incidence of the whitefly Paraleyrodes sp. pos. bondarion four avocado cultivars was studied (Choquette, Hass, Lorena, Santana. The crop management carried out by farmers was characterized and its effect on the white fly presence on three cultivars was evaluated (Choquette, Hass, Lorena. Presence of secondary metabolites on leaves from Hass and Lorena was measured and the effect of their leaf extracts on the mortality and repellency index of whitefly adults was established. There were interactions between crop management and cultivar for the presence of the insect; moderately chemical management had the lowest infestation in all cultivars. The increase in soil fertilization and chemical insecticides increased insect population, and removal of the hemiparasite decreased it. Lorena cultivar had the highest fly preference, insect population increase when there was interaction between cultivar and mature leaves, neutral repellency index, and high percentage of total and non-reducing carbohydrates. The Hass cultivar showed higher amount of coumarins, terpenes and steroids, and high rate of repellency. Lorena attracting the insect is due to the presence of carbohydrates; and Hass repellency is due to the terpene and / or steroids. Research works should be done on whitefly in avocado crops toward cultivars Lorena

  9. Effect of planting density and cutting frequency on forage and grain yields of kochia (Kochia scoparia under saline water irrigation

    Directory of Open Access Journals (Sweden)

    mseou ziyaeii

    2009-06-01

    Full Text Available AField experiment was conducted at Research Farms of Center of Excellence for Special Crops, Ferdowsi University of Mashhad, Mashhad, Iran, in 2006 to evaluate the effect of planting density on forage and grain yield of kochia (Kochia scoparia. Experimental design was a randomized complete block with split-plot arrangement of treatments,with three replications, where different planting densities (10, 20, 30 and 40 plant m-2 were assigned to main plots and number of cutting (including a single cutting, two cutting and no cutting i.e. allowing the crop to grow until maturity allocated to sub-plots. At each harvest date (cutting the biological yield, leaf and stem dry weight, plant height, number of branches and the individual plant biomass were measured. Grain yield and thousand seed weight were also determined at the end of growing season. Result showed the highest biological yield and leaf and stem dry weights for kochia obtaind at 30 plant m-2. The total biomass, leaf and stem dry weights, plant height, number of branches were greater for the first cutting as compared to the second cutting. Planting density and cutting number interacted to affect the leaf dry weight. At physiological maturity stage there were no significant differences among planting densities for plant height and number of branches. The best planting density, in terms of biomass production and leaf and stem dry weight, was found as 30 plant m-2, while for grain production a planting density of 20 plant m-2 could be recommended. Key words: Kochia, planting density, sward, biological yield, grain production.

  10. A cut-cell finite volume – finite element coupling approach for fluid–structure interaction in compressible flow

    International Nuclear Information System (INIS)

    Pasquariello, Vito; Hammerl, Georg; Örley, Felix; Hickel, Stefan; Danowski, Caroline; Popp, Alexander; Wall, Wolfgang A.; Adams, Nikolaus A.

    2016-01-01

    We present a loosely coupled approach for the solution of fluid–structure interaction problems between a compressible flow and a deformable structure. The method is based on staggered Dirichlet–Neumann partitioning. The interface motion in the Eulerian frame is accounted for by a conservative cut-cell Immersed Boundary method. The present approach enables sub-cell resolution by considering individual cut-elements within a single fluid cell, which guarantees an accurate representation of the time-varying solid interface. The cut-cell procedure inevitably leads to non-matching interfaces, demanding for a special treatment. A Mortar method is chosen in order to obtain a conservative and consistent load transfer. We validate our method by investigating two-dimensional test cases comprising a shock-loaded rigid cylinder and a deformable panel. Moreover, the aeroelastic instability of a thin plate structure is studied with a focus on the prediction of flutter onset. Finally, we propose a three-dimensional fluid–structure interaction test case of a flexible inflated thin shell interacting with a shock wave involving large and complex structural deformations.

  11. Propagação de amoreira-preta utilizando estacas lenhosas Propagation of blackberry using of woody cutting

    Directory of Open Access Journals (Sweden)

    Fabíola Villa

    2003-08-01

    Full Text Available A amoreira-preta (Rubus sp é uma espécie de clima temperado que, por ocasião da poda hibernal, realizada durante o período de dormência, produz grande quantidade de material vegetal que pode ser utilizado na propagação. Dessa forma, objetivou-se verificar o potencial de enraizamento de estacas lenhosas de duas cultivares de amoreira-preta tratadas com ácido indolbutírico (AIB. De ramos com um ano de idade coletados de plantas-matrizes das cultivares Brazos e Guarani, foram retiradas estacas lenhosas, sem folhas, com aproximadamente 15 cm e tratadas com solução de AIB, nas concentrações de 0, 1000, 2000 e 3000 mg.L-1, por 15 segundos. Posteriormente, as estacas foram plantadas em sacos de polietileno contendo mistura de areia e terra (2:1 v/v como substrato e mantidas em casa-de-vegetação, sob nebulização intermitente durante 90 dias.As cultivares apresentaram diferentes potenciais de enraizamento e desenvolvimento da parte aérea. Maiores percentuais de estacas enraizadas e brotadas, número de folhas e de brotos e peso da matéria seca das brotações foram obtidos em estacas de ‘Brazos' não-tratadas e em estacas de ‘Guarani' com aplicação de 2000 mg.L-1 de AIB.During the winter pruning, in the dormancy period, there are surpluses of great amount of vegetable material that can be used in the propagation. It was aimed at verifying the hardwood cuttings rooting potential of two blackberry cultivar treated with indolebutyric acid (IBA. Hardwood cuttings without leaves, with approximately 15 cm were collected from branches with one year old of ‘Brazos' and ‘Guarani' mother-plant and treated with solution of IBA at of 0, 1000, 2000 and 3000 mg.L-1 concentrations for 15 seconds immersion. Later the cuttings were planted in polyethylene bags containing sand and soil mixture (2:1 v/v as substrate and maintained in greenhouse under intermittent mist for 90 days. The cultivars presented them different rooting potential and

  12. Características de plantas de cultivares de arroz irrigado relacionadas à habilidade competitiva com plantas concorrentes Characteristics of flooded rice cultivar plants related to competitive ability against weeds concurrent plants

    Directory of Open Access Journals (Sweden)

    N.G. Fleck

    2003-04-01

    , variations in leaf area, plant height, and dry weight of rice plants were evaluated. The data were used to calculate leaf area rate (LAR, relative growth rate (RGR, and net assimilation rate (NAR of the cultivars. The cultivars Ligeirinho and XL 6 presented the fastest increments in leaf area, plant height, and dry weight, reaching the highest soil cover values, together with the cultivar IR 841. On the other hand, cultivars Bluebelle and Formosa showed slow absolute growth during the evaluated period, even though presenting the highest values for RGR and NAR, overall.

  13. Antioxidant and carbohydrate changes of two pomegranate cultivars under deficit irrigation stress

    International Nuclear Information System (INIS)

    Ebtedaie, M.; Shekafandeh, A.

    2016-01-01

    The purpose of this study was to evaluate the biochemical responses to water stress tolerance of two pomegranate cultivars, ‘Rabbab’ and ‘Shishehgap’. After the establishment of rooted stem cuttings of both cultivars under greenhouse conditions, they were treated with four levels of deficit irrigations (100%, 75%, 50% and 25% of field capacity) in a completely randomized design with four replications. The results showed a significant difference between the two cultivars regarding antioxidant enzymes activities. In both cultivars, the water stress increased the activity of superoxide dismutase, catalase and ascorbate peroxidase. However, at high water deficit (25% field capacity, FC), ‘Rabbab’ showed significantly higher enzyme activity than ‘Shishehgap’. In each level of irrigation, there were not considerable differences in peroxidase activity between the two cultivars. An increment of 162% and 65.5% in soluble sugar was gained at 50% FC in ‘Rabbab’ and ‘Shishehgap’, respectively. ‘Rabbab’ showed better growth performance in each level of irrigation than ‘Shishehgap’. Therefore, it can be concluded that 'Rabbab', with lesser decline in leaf relative water content (RWC), a strong antioxidant system and accumulation of more soluble carbohydrates, can resist higher water stress than 'Shishehgap'.

  14. Cultivar Evaluation and Essential Test Locations Identification for Sugarcane Breeding in China

    Directory of Open Access Journals (Sweden)

    Jun Luo

    2014-01-01

    Full Text Available The discrepancies across test sites and years, along with the interaction between cultivar and environment, make it difficult to accurately evaluate the differences of the sugarcane cultivars. Using a genotype main effect plus genotype-environment interaction (GGE Biplot software, the yield performance data of seven sugarcane cultivars in the 8th Chinese National Sugarcane Regional Tests were analyzed to identify cultivars recommended for commercial release. Fn38 produced a high and stable sugar yield. Gn02-70 had the lowest cane yield with high stability. Yz06-407 was a high cane yield cultivar with poor stability in sugar yield. Yz05-51 and Lc03-1137 had an unstable cane yield but relatively high sugar yield. Fn39 produced stable high sugar yield with low and unstable cane production. Significantly different sugar and cane yields were observed across seasons due to strong cultivar-environment interactions. Three areas, Guangxi Chongzuo, Guangxi Baise, and Guangxi Hechi, showed better representativeness of cane yield and sugar content than the other four areas. On the other hand, the areas Guangxi Chongzuo, Yunnan Lincang, and Yunnan Baoshan showed strong discrimination ability, while the areas Guangxi Hechi and Guangxi Liuzhou showed poor discrimination ability. This study provides a reference for cultivar evaluation and essential test locations identification for sugarcane breeding in China.

  15. Avaliação de cultivares de alfafa e estimativas de repetibilidade de caracteres forrageiros Evaluation of alfalfa cultivars and estimates of repeatability coefficient of forage traits

    Directory of Open Access Journals (Sweden)

    Reinaldo de Paula Ferreira

    1999-06-01

    Full Text Available O objetivo deste trabalho foi avaliar o desempenho de 42 cultivares de alfafa (Medicago sativa L. e estimar o coeficiente de repetibilidade das características produção de matéria seca, teor de proteína bruta na folha e no caule e tolerância a doenças, avaliadas no período das águas (outubro a março e da seca (abril a setembro, em seis cortes. Observou-se variabilidade significativa entre as cultivares quanto à produção de matéria seca e ao teor de proteína bruta na folha, em ambas as estações. No tocante a teor de proteína bruta no caule e tolerância a doenças, a variabilidade foi manifestada apenas no período da seca. As cultivares de melhor desempenho, para a maioria das características avaliadas, foram Crioula e Cibola. Em geral, o coeficiente de repetibilidade apresentou estimativas de baixa magnitude (inferior a 0,4. Quanto à produção de matéria seca, constatou-se a existência de comportamento similar das cultivares avaliadas nos dois períodos estudados, coeficiente de repetibilidade variando de 0,3195 a 0,4270, determinação genotípica em torno de 65%, e possibilidade de se atingir a predição do valor real por meio de sete a nove cortes.The objective of this study was to evaluate the performance of 42 cultivars of alfalfa (Medicago sativa L. and to estimate the repeatability coefficient for dry matter production, leaf and stem protein content and disease tolerance features during the dry (April to September and rainy (October to March seasons with six cuts. Dry matter yield and leaf protein content presented significant variation in both seasons, although stem protein content and tolerance to diseases were different only during the dry season. Cultivars Crioula and Cibola had the best performance in most features. In general, the repeatability coefficient showed a low magnitude estimate (below 0,40. Regarding dry matter production, the cultivars showed similar behavior in both seasons, with repeatability

  16. Competitive Ability of Lentil (Lens culinaris L. Cultivars to Weed Interference under Rain-fed Conditions

    Directory of Open Access Journals (Sweden)

    Javad Hamzei

    2016-07-01

    weeding and weedy check and five lentil cultivars (Bilehsavar, Karalinta, Kimia, Seymareh and local. This experiment was studied at the Research Farm of Bu-Ali Sina University during the growing season of 2012-2013. Plots were not irrigated because lentil was grown under dry land conditions. Weeds were counted at their greatest intensity, and their identification was much easier. Three square meter samples were randomly collected from each sub-plot for evaluation the weed biomass. At harvest, two outer rows for each plot and 50 cm from each end of the plots were left as borders and the central rows were harvested. Yield and yield components of lentil were classified as biological yield, grain yield, 1000- seed weight, number of pods plant-1, number of seeds per pod and plant height. Results and discussion The results showed that the effects of weed control and cultivar was significant on all traits but plant height and chlorophyll meter reading was not affected by cultivar. Also, the effects of treatment interaction were significant on grain and biological yield. The highest grain and biological yield (110 and 338 g.m-2, respectively was observed at local cultivar on hand weeding treatment. The lowest mean for these traits with a reduction of 82 and 70%, respectively, belonged to Karalinta cultivar on weedy control treatment. Weed interference decreased yield and yield component of all lentil cultivars significantly. Maximum and minimum weed dry matter and weed density belonged to Karalinta and local cultivars, respectively. The highest values for competition and ability of tolerance indices (2.02 and 52.82, respectively belonged to Local cultivar and the lowest values of these indices (0.49 and 23.53, respectively were achieved at Karalinta cultivar. Conclusion It can be concluded that local and Karalinta cultivars were the resistant and sensitive cultivars to weed presence, respectively.

  17. Silage quality of pearl millet cultivars produced in different cutting agesQualidade da silagem de cultivares de milheto produzidas em diferentes idades de corte

    Directory of Open Access Journals (Sweden)

    Welma Santos Cruvinel

    2012-06-01

    Full Text Available The millet has being prominent in recent years, especially with the arrival of early genotypes with high nutritional value and productive potential, coming from breeding. As these genotypes are new, little information exists about them. Thus, it is important to obtain technical information, supported by scientific studies about the behavior of these materials considering the nutritional value and harvest for silage production. The objective of this research was to evaluate the silage quality of pearl millet genotypes grown in different cuts age. The experiment was carried out on the campus of the Agronomy, of the Rio Verde University. The experimental design was randomized blocks with four replications in a 5 x 3 factorial, with five genotypes of millet: ARD 500, ADR 7010, LAB 0730, LAB 0731 and LAB 0732 and three cuts ages: 57, 65 and 73 days after sowing (DAS. The results showed that silages produced by millet, regardless of genotype, could be considered of nutritional value. Since this is a precocious material the best age that provided the best quality of these silages was when the materials were harvested at 57 DAS.O milheto vem ganhando destaque nos últimos anos, principalmente com a chegada de genótipos precoces e de alto valor nutritivo e potencial produtivo, oriundos do melhoramento genético. Por se tratarem de materiais novos, existem poucas informações sobre esses genótipos. Nesse sentido, é importante obter informações técnicas, apoiadas em estudos científicos, sobre o comportamento desses materiais em relação ao valor nutritivo e época de colheita para a produção de silagens. Diante disso, objetivou-se avaliar a qualidade de silagem de genótipos de milheto produzidas em diferentes idades de cortes. O experimento foi conduzido no Campus da Faculdade de Agronomia da Universidade de Rio Verde. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições, em esquema fatorial 5 x 3, sendo, cinco

  18. Identification of rice cultivars with low brown rice mixed cadmium and lead contents and their interactions with the micronutrients iron, zinc, nickel and manganese.

    Science.gov (United States)

    Li, Bing; Wang, Xun; Qi, Xiaoli; Huang, Lu; Ye, Zhihong

    2012-01-01

    Paddy fields in mining areas are usually co-contaminated by a cocktail of mixed toxic heavy metals (e.g., Cd and Pb in Pb/Zn mines). However, previous studies on rice cultivars screened for effective metal exclusion have mostly focused on individual metals, and have been conducted under pot-trial or hydroponic solution conditions. This study identified rice cultivars with both low Cd and Pb accumulation under Cd- and Pb-contaminated field conditions, and the interactions of the toxic elements Cd and Pb with the micronutrient elements Fe, Zn, Mn and Ni were also studied. Among 32 rice cultivars tested, there were significant differences in Cd (0.06-0.59 mg/kg) and Pb (0.25-3.15 mg/kg) levels in their brown rice, and similar results were also found for the micronutrient elements. Significant decreases in concentrations of Fe and Mn were detected with increasing Cd concentrations and a significant elevation in Fe, Mn and Ni with increasing Pb concentrations. A similar result was also shown by Cd and Ni. Three cultivars were identified with a combination of low brown rice Cd and Pb, high micronutrient and grain yield (Wufengyou 2168, Tianyou 196 and Guinongzhan). Present results suggest that it is possible to breed rice cultivars with low mixed toxic element (Cd, Pb) and high micronutrient contents along with high grain yields, thus ensuring food safety and quality.

  19. The Effect of Vesicular Arbuscular Mycorrhizal (VAM on Yield and Yield Components of Three Sorghum (Sorghum bicolor Cultivars

    Directory of Open Access Journals (Sweden)

    A. Mehraban

    2012-10-01

    Full Text Available To evaluate the influence of vesicular arbuscular mycorrhizal (VAM on yield and yield components of three sorghum cultivars, a factorial experiment based randomized complete block design with four replications was carried out in 2007, at the Agricultural Research Center of Zahak, Iran. The treatments were different mycorrhiza species in three levels: without mycorrhiza (M1, Glomus etanicatum (M2 and G. mosseae(M3 and three cultivars of sorghum: local cultivars (C1, KGS25 (C2 and KGS29 (C3. The results showed that all of the traits measured were increased by inoculation of cultivars with mycorrhiza. The highest plant height (165.1 cm, stem diameter (1.61 cm, flag leaf length (27.22 cm, flag leaf width (3.67 cm and ear width (5.00 cm was obtained by inoculation of seed with Glumus etanicatum, and highest ear length (19.21 cm, ear number (2.51, seed number per ear (10252.11, 1000-seed weight (17.56 g and grain yield (1967.32 kg/ha by using Glumus mossea. The highest leaf width and length belonged to local cultivar, and the highest seed yield to KGS 29 cultivar. However, differences of other traits among sorghum cultivars were not significant. Based on the experimental results it can be concluded that highest grain yield may be obtained by inoculating seeds of KGS 29 with Glumus mossea.

  20. Proteomic Analysis of Aphid-Resistant and -Sensitive Rose (Rosa Hybrida) Cultivars at Two Developmental Stages.

    Science.gov (United States)

    Muneer, Sowbiya; Jeong, Hai Kyoung; Park, Yoo Gyeong; Jeong, Byoung Ryong

    2018-05-25

    The rose is one the most commercially grown and costly ornamental plants because of its aesthetic beauty and aroma. A large number of pests attack its buds, flowers, leaves, and stem at every growing stage due to its high sugar content. The most common pest on roses are aphids which are considered to be the major cause for product loss. Aphid infestations lead to major changes in rose plants, such as large and irregular holes in petals, intact leaves and devouring tissues. It is hypothesized that different cut rose cultivars would have different levels of sensitivity or resistance to aphids, since different levels of infestation are observed in commercially cut rose production greenhouses. The present work compared four cut rose cultivars which were bred in Korea and were either resistant or sensitive to aphid infestation at different flower developmental stages. An integrative study was conducted using comprehensive proteome analyses. Proteins related to ubiquitin metabolism and the stress response were differentially expressed due to aphid infestation. The regulations and possible functions of identified proteins are presented in detail. The differential expressions of the identified proteins were validated by immunoblotting and blue native page. In addition, total sugar and carbohydrate content were also observed.

  1. Effect of Three Species of Mycorrhiza Inoculation on Yield and Some Physiological properties of Two Potato Cultivars under Drought Stress in Controlled Conditions

    Directory of Open Access Journals (Sweden)

    S. Khaninejad

    2017-03-01

    , soil and mycorrhizal active parts (spore and hyphae provided by corn root during a four-month period, in root space. Results and Discussion The results indicated that Agria cultivar in higher than Fontana. The drought stress decreased bush height, totally fungi resulted in increasing bush height in both cultivars. However, leaf area of Fontana was more than Agria; drought stress decreased leaf area but using Glomus fasciculatum and Glomus mosseae fungi increased the plant height in both cultivars. Among the treatments, the effect of cultivar on chlorophyll fluorescence was significant and there was no significant difference with each other. Only the effect of cultivar on chlorophyll fluorescence was significant among the treatments and there was no significant difference among other treatments. The amount of Spad index in Agria was 10% more than Fontana. This parameter was observed much more in control treatment than fungal treatments; drought stress indicated higher spad. There was a significant difference between Agria and Fontana cultivars for tuber weight. Fontana increased the production to 36% by producing 129g tuber to Agria cultivar. This difference was observed in control treatment and drought stress. Among various cultivars, Glomus fasciculatum and Glomus mosseae were significantly different from other treatments with 120 and 123gr tuber, respectively; and control treatment contained the least one with a 75g tuber. The interaction of fungus and stress indicated that there was no significant difference in Fontana cultivar and in mycorrhizal treatments for single-bush yield; but in control treatment, this rate was the least and had significant difference with other treatments. The most significant difference among stress levels was observed in Glomus intraradices; in this fungus, control treatment indicated 44% yield more than drought stress. Fontana indicated a significant difference to Agria cultivar for four tubers in a bush, averagely. Control treatment

  2. Altered cultivar resistance of kimchi cabbage seedlings mediated by salicylic Acid, jasmonic Acid and ethylene.

    Science.gov (United States)

    Lee, Young Hee; Kim, Sang Hee; Yun, Byung-Wook; Hong, Jeum Kyu

    2014-09-01

    Two cultivars Buram-3-ho (susceptible) and CR-Hagwang (moderate resistant) of kimchi cabbage seedlings showed differential defense responses to anthracnose (Colletotrichum higginsianum), black spot (Alternaria brassicicola) and black rot (Xanthomonas campestris pv. campestris, Xcc) diseases in our previous study. Defense-related hormones salicylic acid (SA), jasmonic acid (JA) and ethylene led to different transcriptional regulation of pathogenesis-related (PR) gene expression in both cultivars. In this study, exogenous application of SA suppressed basal defenses to C. higginsianum in the 1st leaves of the susceptible cultivar and cultivar resistance of the 2nd leaves of the resistant cultivar. SA also enhanced susceptibility of the susceptible cultivar to A. brassicicola. By contrast, SA elevated disease resistance to Xcc in the resistant cultivar, but not in the susceptible cultivar. Methyl jasmonate (MJ) treatment did not affect the disease resistance to C. higginsianum and Xcc in either cultivar, but it compromised the disease resistance to A. brassicicola in the resistant cultivar. Treatment with 1-aminocyclopropane-1-carboxylic acid (ACC) ethylene precursor did not change resistance of the either cultivar to C. higginsianum and Xcc. Effect of ACC pretreatment on the resistance to A. brassicicola was not distinguished between susceptible and resistant cultivars, because cultivar resistance of the resistant cultivar was lost by prolonged moist dark conditions. Taken together, exogenously applied SA, JA and ethylene altered defense signaling crosstalk to three diseases of anthracnose, black spot and black rot in a cultivar-dependent manner.

  3. Altered Cultivar Resistance of Kimchi Cabbage Seedlings Mediated by Salicylic Acid, Jasmonic Acid and Ethylene

    Directory of Open Access Journals (Sweden)

    Young Hee Lee

    2014-09-01

    Full Text Available Two cultivars Buram-3-ho (susceptible and CR-Hagwang (moderate resistant of kimchi cabbage seedlings showed differential defense responses to anthracnose (Colletotrichum higginsianum, black spot (Alternaria brassicicola and black rot (Xanthomonas campestris pv. campestris, Xcc diseases in our previous study. Defense-related hormones salicylic acid (SA, jasmonic acid (JA and ethylene led to different transcriptional regulation of pathogenesis-related (PR gene expression in both cultivars. In this study, exogenous application of SA suppressed basal defenses to C. higginsianum in the 1st leaves of the susceptible cultivar and cultivar resistance of the 2nd leaves of the resistant cultivar. SA also enhanced susceptibility of the susceptible cultivar to A. brassicicola. By contrast, SA elevated disease resistance to Xcc in the resistant cultivar, but not in the susceptible cultivar. Methyl jasmonate (MJ treatment did not affect the disease resistance to C. higginsianum and Xcc in either cultivar, but it compromised the disease resistance to A. brassicicola in the resistant cultivar. Treatment with 1-aminocyclopropane-1-carboxylic acid (ACC ethylene precursor did not change resistance of the either cultivar to C. higginsianum and Xcc. Effect of ACC pretreatment on the resistance to A. brassicicola was not distinguished between susceptible and resistant cultivars, because cultivar resistance of the resistant cultivar was lost by prolonged moist dark conditions. Taken together, exogenously applied SA, JA and ethylene altered defense signaling crosstalk to three diseases of anthracnose, black spot and black rot in a cultivar-dependent manner.

  4. Screening of marigold (Tagetes erecta L. cultivars for drought stress based on vegetative and physiological characteristics

    Directory of Open Access Journals (Sweden)

    Adnan Younis

    2018-05-01

    Full Text Available Drought tolerance is an important genotypic character to be exploited for the plant cultivar selection under water deficit conditions. In the recent study, we examined the response of two marigold cultivars (Inca and Bonanza under different regimes of drought stress. The aim was to determine the best performing cultivar under water/drought stress. Three irrigation treatments include; 4 days (T1, 6 days (T2 and 8 days (T3 in comparison to control 1 day (T0 interval were imposed. Response characters under study were morphological, physiological and anatomical. Complete Randomized Design (CRD with four replications in two factorial arrangements was followed for experiment layout. The results revealed that increasing water stress adversely affect plant height, in both cultivars. Both cultivars showed a decreasing trend to the number of flowers under water stress. Total chlorophyll contents including a, b were also showed reduction under prolonged drought treatment in both cultivars from (2.7 mg g-1 FW to (1 mg g-1 FW. Overall, the performance of cultivar (cv. Inca was satisfactory under water stress regimes. These results are helpful for selecting drought tolerant marigold cultivars in water scarce areas.   

  5. Perfilhamento e algumas características morfológicas do capim-elefante cv. Roxo sob quatro alturas de corte em duas épocas do ano Tillering and some morphologic characteristics of elephant grass var. Roxo, cut at four heights in two periods of the year

    Directory of Open Access Journals (Sweden)

    Estácio Alves dos Santos

    2001-02-01

    existent tillers in the plots. A sample of 3 or 5 tillers was taken from each parcel and they were dehydrated in air forced stove and the separation of leaves and stems fractions were done. There was interaction of the factors (cutting height vs. seasons for number of tillers by m² and L/SR. In the rainy season there was more basal tillering than in the dry period; and the number of aerial tillers was higher in all cutting made above the ground. The L/SR increased in rainy season in the 30 and 45cm cutting height. The higher cuts presented larger proportion of leaves and smaller proportion of stems. The leaves percentages in rainy season were higher than those in dry season.

  6. Produtividade e desenvolvimento de cultivares de repolho em função de doses de boro Yield of cabbage cultivars depending on levels of boron

    Directory of Open Access Journals (Sweden)

    Katiane S Silva

    2012-09-01

    Full Text Available A cultura do repolho é cultivada em áreas pequenas e necessita de muita mão de obra, sendo na maior parte conduzida pela agricultura familiar. Avaliou-se o efeito de doses de boro em diferentes cultivares de repolho na região oeste de Mato Grosso do Sul. O experimento foi conduzido na Universidade Estadual de Mato Grosso do Sul, Unidade Universitária de Aquidauana. O delineamento experimental utilizado foi de blocos casualizados no esquema fatorial 2 x 5, sendo duas cultivares e cinco doses de boro, com quatro repetições. Foram avaliadas as características: teores de boro foliar, área da planta, altura de planta, número de folhas externas, massa fresca de folhas externas, massa seca de folhas externas, altura da cabeça, diâmetro da cabeça, número de folhas internas, massa fresca de folhas internas, massa seca de folhas externas, classificação do peso da cabeça, compacidade e produção por hectare. A cultivar 60 Dias apresentou maiores valores nos componentes de produção e conseqüentemente maior produtividade. A aplicação de boro influencia linearmente nos teor de boro foliar, diâmetro de cabeça e número de folha interna. As doses de boro interferem na produtividade de repolho, sendo que na cultivar 60 Dias a dose máxima é de 7,2 kg ha-1 e para cultivar Chato de Quintal a dose mínima deve ser de 1,06 kg ha-1.The cabbage crop is cultivated in small areas and requires much labor, this crop being mostly driven by family farmers. This study aimed to evaluate the effect of boron levels in different cultivars of cabbage in western Mato Grosso do Sul state, Brazil. The experiment was carried out at the Universidade Estadual de Mato Grosso do Sul, Unidade Universitária de Aquidauana. The experimental design was randomized blocks in factorial scheme 2 x 5, two cultivars and five doses of boron, with four replications. We evaluated the following features: boron foliar plant area, plant height, number of outer leaves, fresh

  7. Avaliação de cultivares do gênero Cynodon com e sem nitrogênio Evaluation of cultivars of the genus Cynodon with or without nitrogen

    Directory of Open Access Journals (Sweden)

    Ulysses Cecato

    2001-05-01

    Full Text Available O experimento foi realizado com o objetivo de determinar a composição química, a digestibilidade in vitro da matéria seca (DIVMS, da matéria orgânica (DIVMO, da parede celular (DIVPC, a produção de matéria seca verde total (PMSVT, vigor da rebrota (VR e relação colmo/lâmina foliar (C/L de cinco cultivares do gênero Cynodon (Tifton 44, Tifton 85, “Coast-cross”, Estrela Porto Rico e Estrela Roxa, em 4 cortes a cada 35 dias no verão (PV e 2 cortes a cada 70 dias no inverno (PI com e sem N (0 e 400 kg/ha/ano. Na avaliação da composição química, a PB não diferiu (P ≤ 0,05 entre as gramíneas, porém diferiu (P ≤ 0,05 quanto ao nível de nitrogênio e ao corte. A concentração da FDA e FDN apresentou diferença estatística (P ≤ 0,05 entre as gramíneas, nível de adubação e cortes realizados. As gramíneas apresentaram diferenças estatísticas entre si (P ≤ 0,05 para a DIVMS, DIVMO e DIVPC. A Tifton 44 apresentou digestibilidade maior para todos os parâmetros, enquanto que a cultivar Estrela Porto Rico apresentou DIVPC menor em relação às demais, e as outras não diferiram entre si. A PMSVT diferiu (P Chemical composition, in vitro digestibility of dry matter (IVDDM, organic matter (IVDOM and cell wall (IVDCW, green dry matter production (GDMP, plant re-growth (PR and stem/leaf ratio (S/L of five cultivars of the genus Cynodon at two levels of N fertilization (0 and 400 kg/ha in the summer and spring are provided. CP did not differ (P > 0.05 from other grasses in chemical composition. However differences (P ≤ 0.05 occurred due to nitrogen level and cut intervals. Values for ADF and NDF were affected (P ≤ 0,05 by grass, nitrogen level and cut intervals. Grasses showed statistical differences (P ≤ 0.05 for IVDDM, IVDOM and IVDCW. Tifton 44 showed the highest digestibility for all parameters, while Estrela Porto Rico the lowest digestibility for IVDCW. Other grasses did not differ from each other. There were

  8. Trash measurement in middle sugar cane cultivars after the harvest; Quantificacao de palhico em diferentes cultivares medios de cana-de-acucar, apos a colheita

    Energy Technology Data Exchange (ETDEWEB)

    Santin, Ivan; Silva Neto, Helio F. da; Tasso Junior, Luiz Carlos; Marques, Diogo; Marques, Marcos O. [Universidade Estadual Paulista (FCAV/UNESP), Jaboticabal, SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Tecnologia], E-mail: santinivan@hotmail.com

    2010-07-01

    The introduction of mechanized harvesting of sugarcane made it possible to cut raw cane. Thus the amount of trash has produced a significant increase, which is important in that it can be used in the production of electricity through combustion. This study aimed to quantify the productivity of trash in the semi-mechanized harvesting of different middle sugarcane cultivars. The experiment was conducted at UNESP-Jaboticabal. The experimental design was a randomized block design with six treatments (cultivars) and three replications. At harvest, we counted the number of stems in the meter and the weight of stems was estimated agricultural productivity. After harvesting the cane, was used a rectangle of 4.5 m{sup 2}, which was placed randomly within each plot and all trash contained therein was weighed. Using these results to estimate the potential number of people who would benefit from the energy from this trash. Cultivar IAC94-4004 received the largest amount of trash (44.33 t ha- 1), IP (37.66%), Pd (38.00 x10-6) and TCH (118.00 t ha-1). Cultivar IAC95- 5000 obtained the less satisfactory results, generating a small amount of trash and therefore expressing lower potential energy. (author)

  9. Genetic diversity assessed by microsatellite markers in sweet corn cultivars

    Directory of Open Access Journals (Sweden)

    Ana Daniela Lopes

    2015-12-01

    Full Text Available Information on genetic diversity is essential to the characterization and utilization of germplasm. The genetic diversity of twenty-two sweet corn cultivars (seventeen open-pollinated varieties, OPV, and five hybrids, H was investigated by applying simple sequence repeat markers. A total of 257 primers were tested, of which 160 were found to be usable in terms of high reproducibility for all the samples tested; 45 were polymorphic loci, of which 30 were used to assess the genetic diversity of sweet corn cultivars. We detected a total of 86 alleles using 30 microsatellite primers. The mean polymorphism was 82 %. The highest heterozygosity values (Ho = 0.20 were found in the PR030-Doce Flor da Serra and BR427 III OPVs, whereas the lowest values (0.14 were recorded in the MG161-Branco Doce and Doce Cubano OPVs. The polymorphism information content ranged from 0.19 (Umc2319 to 0.71 (Umc2205. The analysis of molecular variance revealed that most of the genetic variability was concentrated within the cultivars of sweet corn (75 %, with less variability between them (25 %. The consensus tree derived from the neighbor-joining (NJ algorithm using 1,000 bootstrapping replicates revealed seven genetically different groups. Nei’s diversity values varied between 0.103 (Doce do Hawai × CNPH-1 cultivars and 0.645 (Amarelo Doce × Lili cultivars, indicating a narrow genetic basis. The Lili hybrid was the most distant cultivar, as revealed by Principal Coordinates Analysis and the NJ tree. This study on genetic diversity will be useful for planning future studies on sweet corn genetic resources and can complement the breeding programs for this crop.

  10. COMPATIBILITY AND FEASIBILITY OF GRAFT TOMATO CULTIVAR SANTA CRUZ KADA IN DIFFERENT ROOTSTOCKS

    Directory of Open Access Journals (Sweden)

    A. R. Zeist

    2015-02-01

    Full Text Available Tomato production through the technique of grafting aims to control soil pathogens, induce flowering, and improve tolerance to waterlogging, salinity and alkalinity of the soil. For this work were performed 50 grafts for each type of rootstock, totaling 100 slips and 50 seedlings kept as control. After 15 days of grafting, the seedlings were evaluated on the percentage of picks grafting. The treatment which used the tomato cultivar Cherry Red® as rootstock presented results of vegetative growth (height and volume Cup higher than other treatments. However after transplanting, defective development was observed for plants with grafting when compared to the controls. After 35 days of follow up, there was a low survival rate, being 5% of the plants. According to the results obtained in this work the tomato cultivar Santa Cruz Kada® has good compatibility with the rootstock cultivar Cayenne® pepper and tomato cultivar Cherry Red®

  11. Raised BMI cut-off for overweight in Greenland Inuit--a review.

    Science.gov (United States)

    Andersen, Stig; Fleischer Rex, Karsten; Noahsen, Paneeraq; Sørensen, Hans Christian Florian; Mulvad, Gert; Laurberg, Peter

    2013-01-01

    Obesity is associated with increased morbidity and premature death. Obesity rates have increased worldwide and the WHO recommends monitoring. A steep rise in body mass index (BMI), a measure of adiposity, was detected in Greenland from 1963 to 1998. Interestingly, the BMI starting point was in the overweight range. This is not conceivable in a disease-free, physically active, pre-western hunter population. This led us to reconsider the cut-off point for overweight among Inuit in Greenland. We found 3 different approaches to defining the cut-off point of high BMI in Inuit. First, the contribution to the height by the torso compared to the legs is relatively high. This causes relatively more kilograms per centimetre of height that increases the BMI by approximately 10% compared to Caucasian whites. Second, defining the cut-off by the upper 90-percentile of BMI from height and weight in healthy young Inuit surveyed in 1963 estimated the cut-off point to be around 10% higher compared to Caucasians. Third, if similar LDL-cholesterol and triglycerides are assumed for a certain BMI in Caucasians, the corresponding BMI in Inuit in both Greenland and Canada is around 10% higher. However, genetic admixture of Greenland Inuit and Caucasian Danes will influence this difference and hamper a clear distinction with time. Defining overweight according to the WHO cut-off of a BMI above 25 kg/m(2) in Greenland Inuit may overestimate the number of individuals with elevated BMI.

  12. Discrimination of sugarcane according to cultivar by 1H NMR and chemometric analyses

    Energy Technology Data Exchange (ETDEWEB)

    Alves Filho, Elenilson G.; Silva, Lorena M.A.; Choze, Rafael; Liao, Luciano M. [Laboratorio de Ressonancia Magnetica Nuclear, Instituto de Quimica, Universidade Federal de Goias (UFG), Goiania, GO (Brazil); Honda, Neli K.; Alcantara, Glaucia B. [Departamento de Quimica, Universidade Federal de Mato Grosso do Sul (UFMS), Campo Grande, MS (Brazil)

    2012-07-01

    Several technologies for the development of new sugarcane cultivars have mainly focused on the increase in productivity and greater disease resistance. Sugarcane cultivars are usually identified by the organography of the leaves and stems, the analysis of peroxidase and esterase isoenzyme activities and the total soluble protein as well as soluble solid content. Nuclear magnetic resonance (NMR) associated with chemometric analysis has proven to be a valuable tool for cultivar assessment. Thus, this article describes the potential of chemometric analysis applied to 1H high resolution magic angle spinning (HRMAS) and NMR in solution for the investigation of sugarcane cultivars. For this purpose, leaves from eight different cultivars of sugarcane were investigated by {sup 1}H NMR spectroscopy in combination with chemometric analysis. The approach shows to be a useful tool for the distinction and classification of different sugarcane cultivars as well as to access the differences on its chemical composition. (author)

  13. The Lacanian Concept of Cut in Light of Lacan's Interactions with Maud Mannoni

    Directory of Open Access Journals (Sweden)

    Laure Razon

    2017-12-01

    Full Text Available This article sets out to shed light on the Lacanian concept of cut (introduced in 1961–1962: it refers to the symbolic (i.e., linguistic operation which produces the object a and thereby enables separation, through which the subject emerges. To that effect, we show how this concept benefitted from Lacan's interactions with Maud Mannoni (1923-1998, who focused on clinical situations where implementing a cut in the subject's environment is the only way to enable a separation between the child and the Other. Lacan first drew on Mannoni's clinical elaborations about the retarded child's alienation to the maternal fantasy: when the mother's unconscious doesn't leave room for the cut, it prevents the separation through which the child could become a subject. Lacan generalized this in the late 1960s: he broadened Mannoni's alienation to the maternal fantasy to characterize a type of child symptom, where children become their mother's non-separated, de-phallicized object a. Then, in the 1970s, Mannoni proposed an original theoretico-clinical setting to address the configurations where the object a isn't separated: in the splintered institution, the team follows on projects of activities (professional, personal, etc. outside the institution voiced by children who haven't previously encountered the symbolic cut, by helping them realize these external projects. By thus acknowledging their attempts at establishing a cut and giving them consistency, the splintered institution helps them psychically elaborate separation.

  14. Compatibilidade de enxertia de cultivares de marmeleiros com pereiras Compatibility of pear cultivars on quinces rootstocks

    Directory of Open Access Journals (Sweden)

    Zeni Fonseca Pinto Tomaz

    2009-12-01

    on the rootstocks Quince Adam's and Quince C. The evaluated variables were: the section of trunk diameter at the graft union, and 5cm above and 5cm under the graft union; the diameter difference between scion and rootstock; plant height; volume and dry mass of canopy and roots. Moreover, it was observed the vascular connection of the graft union by immersion of the base of the plants (under the graft union in a 0.08% Fuccinic acid solution. It was observed that the pear cv. Packham's Triumph is compatible with the Quince rootstocks cvs. Adams and Quince C, whereas the pear cv. Kieffer had morphological incompatibility symptoms with the Quince cvs Adams and Quince C.

  15. Srain Yield Stability of some Bread Wheat Cultivars Introduced in Moderate and Cold Area of Iran

    Directory of Open Access Journals (Sweden)

    Alireza Tarinejad

    2017-07-01

    Full Text Available Due to genotype×environmental interaction, seed yields of genotypes are usually evaluated in broad range of environmental conditions to obtain efficient information concering cultivar selection and introduction. For this purpose, an experiment was conducted based on RCBD with three replications, using 20 bread wheat cultivars to study seed yield stability of cultivars introduced during the past several years to cold, and moderate areas of Iran. This experiment was carried out at the Agriculture Research Station of Islamic Azad University, Tabriz branch during 2009-2012, for 4 years. Because of significant genotype×environmental interaction, stability analysis was performed by all possible methods to obtain stable and high potential cultivars. The result of stability analysis showed non parametric, AMMI, GGE biplot and simultaneous selection stability methods introduce lower, high, and higher yielding cultivars to be stable. On basis of all stability methods, Bahar (spring type introduced in 2008, Mahdavi (facultative type released in 1995, and Azadi cultivar (winter type introduced in 1989 respectively with 7.27, 7.13 and 6.88 (t/ha grain yield were stable and were highly potential cultivars among other cultivars. These cultivars could be introduced to researchers as stable cultivars to be used as parental ones in breeding programs for production of highly stable and seed yielding lines.

  16. Cultivar and Rhizobium Strain Effects on the Symbiotic Performance of Pea (Pisum sativum)

    DEFF Research Database (Denmark)

    Skøt, Leif

    1983-01-01

    The symbiotic performance of four pea (Pisum sativum L.) cultivars in combination with each of four strains of Rhizobium leguminosarum was studied in growth chamber experiments in order to estimate the effects of cultivars, strains and cultivar × strain interaction on the variation in dry weight, N...

  17. Finesse of transparent tissue cutting by ultrafast lasers at various wavelengths

    Science.gov (United States)

    Wang, Jenny; Schuele, Georg; Palanker, Daniel

    2015-12-01

    Transparent ocular tissues, such as the cornea and crystalline lens, can be ablated or dissected using short-pulse lasers. In refractive and cataract surgeries, the cornea, lens, and lens capsule can be cut by producing dielectric breakdown in the focus of a near-infrared (IR) femtosecond laser, which results in explosive vaporization of the interstitial water, causing mechanical rupture of the surrounding tissue. Here, we compare the texture of edges of lens capsule cut by femtosecond lasers with IR and ultraviolet (UV) wavelengths and explore differences in interactions of these lasers with biological molecules. Scanning electron microscopy indicates that a 400-nm laser is capable of producing very smooth cut edges compared to 800 or 1030 nm at a similar focusing angle. Using gel electrophoresis and liquid chromatography/mass spectrometry, we observe laser-induced nonlinear breakdown of proteins and polypeptides by 400-nm femtosecond pulses above and below the dielectric breakdown threshold. On the other hand, 800-nm femtosecond lasers do not produce significant dissociation even above the threshold of dielectric breakdown. However, despite this additional interaction of UV femtosecond laser with proteins, we determine that efficient cutting requires plasma-mediated bubble formation and that remarkably smooth edges are the result of reduced thresholds and smaller focal volume.

  18. Optimum hub height of a wind turbine for maximizing annual net profit

    International Nuclear Information System (INIS)

    Lee, Jaehwan; Kim, Dong Rip; Lee, Kwan-Soo

    2015-01-01

    Highlights: • Annual Net Profit was proposed to optimize the hub height of a wind turbine. • Procedures of the hub height optimization method were introduced. • Effect of local wind speed characteristics on optimum hub height was illustrated. • Effect of rated power on optimum hub height was negligible in the range 0.75–3 MW. • Rated speed and cut-out speed had great effects on optimum hub height. - Abstract: The optimization method of the hub height, which can ensure the economic feasibility of the wind turbine, is proposed in this study. Annual Net Profit is suggested as an objective function and the optimization procedure is developed. The effects of local wind speed and wind turbine power characteristics on the optimum hub height are investigated. The optimum hub height decreased as the mean wind speed and wind shear exponent increased. Rated power had little effect on optimum hub height; it follows that the economies of scale are negligible in the rated power range of 0.75–3 MW. Among the wind turbine power characteristics, rated speed and cut-out speed most strongly affected the optimum hub height

  19. MORPHOLOGICAL CHARACTERISTICS AND FORAGE PRODUCTIVITY OF IRRIGATED CACTUS PEAR UNDER DIFFERENT CUTTING INTENSITIES

    Directory of Open Access Journals (Sweden)

    GUILHERME FERREIRA DA COSTA LIMA

    2016-01-01

    Full Text Available This study evaluated the effect of different cutting intensities and years of harvesting on the morphological characteristics and production of fresh (FMP and dry matter (DMP of cactus pear cv. Gigante (Opuntia ficus-indica Mill under conditions of irrigation, high planting density and fertilization, with 12 months of regrowth. The experimental was completely randomized in a factorial design (3 × 2 with 12 replicates. The treatments were three cutting intensities (preserving the mother cladode (PMC, primary cladodes (PPC, or secondary cladodes (PSC, and two years of harvesting. The soil was classified as Cambisol Haplicum and the irrigation water was classified as C4S1 (EC 5.25 dS.m-1 density of 50,000 plants ha-1. The research evaluated plant height, number of cladodes per plant (NCP, length, width, perimeter and thickness of the cladodes, cladode area (CA, cladode area index (CAI, FMP and DMP. There was no significant interaction between treatments (P > 0.05 for the variables plant height, NCP, CAI and FMP. The variables related to cladode morphology showed a significant interaction (P < 0.05. The treatment PSC resulted in a greater DMP (P < 0.05 with a mean of 27.17 Mg ha-1 yr-1, compared to PPC (18.58 Mg ha-1 yr-1 or PMC (11.78 Mg ha-1 yr-1. The treatment PSC promoted greater NCP and forage productivity at harvest and can be considered as a management practice for the sustainability of cactus pear cv. Gigante under irrigation. The more important morphological characteristics were also influenced by the lower cutting intensities.

  20. Sensibilidade de cultivares de cana-de-açúcar à mistura trifloxysulfuron-sodium + ametryn Sensitivity of sugarcane cultivars to trifloxysulfuron sodium + ametryn mixture

    Directory of Open Access Journals (Sweden)

    E.A. Ferreira

    2005-03-01

    (SP801842, SP79-1011, SP81-3250, SP80-1816, RB855113, RB835486, RB845210, RB867515, RB928064, RB72454 and RB855536 and four clones (RB947643, RB855002, RB957712 and RB957689 of sugarcane to the pre-formulated mixture of the herbicides trifloxysulfuron-sodium (18.5 g kg-1 + ametryn (731.5 g kg-1, termed Krismat®. Cultivars and clones were cultivated in vases under non-protected environment. In both assays, the herbicide mixture was applied at 60 days after sprouting. In assay 1, the herbicide mixture was applied at a single rate of 2.00 kg ha-1 on all the cultivars and clones, while in assay 2 it was applied at rates of 1.00; 2.00; and 6.00 kg ha-1 on cultivars RB855113 and RB867515. After herbicide application and harvest at 45 days after treatment (DAT, weekly evaluations of phytotoxicity (%,and dry matter were conducted as well. The variables plant height, leaf number, leaf area and dry matter of the aerial part and stalk were evaluated only in the second assay. RB855113 cultivar showed the highest sensitivity to the herbicide mixture; the genotypes SP80-1842, SP80-1816, SP79-1011 and RB957689 showed medium sensitivity and the clones presented good tolerance. For the RB855113 cultivar, the highest toxicity index was observed from 20 to 27 DAT. Reduction of plant height, leaf number, foliar area and dry matter of the aerial part and stalk was observed during this period due to the increase of the product doses. Cultivar RB867515 was tolerant at the lowest herbicide doses. However, it was found to be sensitive, at the highest tested dose.

  1. Genetic variability in Brazilian wheat cultivars assessed by microsatellite markers

    Directory of Open Access Journals (Sweden)

    Ivan Schuster

    2009-01-01

    Full Text Available Wheat (Triticum aestivum is one of the most important food staples in the south of Brazil. Understanding genetic variability among the assortment of Brazilian wheat is important for breeding. The aim of this work was to molecularly characterize the thirty-six wheat cultivars recommended for various regions of Brazil, and to assess mutual genetic distances, through the use of microsatellite markers. Twenty three polymorphic microsatellite markers (PMM delineated all 36 of the samples, revealing a total of 74 simple sequence repeat (SSR alleles, i.e. an average of 3.2 alleles per locus. Polymorphic information content (PIC value calculated to assess the informativeness of each marker ranged from 0.20 to 0.79, with a mean of 0.49. Genetic distances among the 36 cultivars ranged from 0.10 (between cultivars Ocepar 18 and BRS 207 to 0.88 (between cultivars CD 101 and Fudancep 46, the mean distance being 0.48. Twelve groups were obtained by using the unweighted pair-group method with arithmetic means analysis (UPGMA, and thirteen through the Tocher method. Both methods produced similar clusters, with one to thirteen cultivars per group. The results indicate that these tools may be used to protect intellectual property and for breeding and selection programs.

  2. Application of calcium, boron and sucrose on cut peony stems (Paeonia lactiflora Pall. cv. Karl Rosenfield

    Directory of Open Access Journals (Sweden)

    LOYOLA NELSON EDUARDO

    2012-04-01

    Full Text Available

    height: normal; text-align: justify;"> 

    height: normal; margin: 0cm 0cm 0pt; mso-layout-grid-align: none;">In cut flowers, there must be clear guidelines for export, therefore, it is essential to proper postharvest management, to store the flowers for as long as possible in top condition, both for transit and vase life; in Chile there is very little knowledge about this operation. In order to address these questions, a study was conducted to evaluate the performance of postharvest life of the peony cultivar ‘Karl Rosenfield’, using four treatments: water, preharvest Borocal® with water, Borocal® with 100 g sucrose/L of water, and 100 g sucrose/L of water, some of which had Borocal® added preharvest and sucrose applied postharvest; evaluating four quality parameters in cut flowers: floral diameter, stem curvature, stem weight and vase life. The present study lasted 25 days, which was the total time of refrigerated storage. The results showed that peony stems with preharvest applications of Borocal® and postharvest applications of only water presented the highest values in terms of floral diameter, stem weight and particularly increased vase life, with no significant differences in stem curvature.

  3. Rebrota de Lotus spp. de diferentes hábitos de crescimento Regrowth of Lotus spp. with different growth habits

    Directory of Open Access Journals (Sweden)

    Rita Poles Maroso

    2007-10-01

    Full Text Available Este trabalho foi realizado com o objetivo de comparar cultivares de Lotus spp. de diferentes hábitos de crescimento (L. corniculatus: São Gabriel - semi-ereto; ARS2620 - prostrado; L. uliginosus: cv. Maku - decumbente cultivados em vasos e submetidos a diferentes alturas (4 - 8 cm e freqüências (quinzenal - mensal de corte do 95º ao 233º dia de idade. As maiores produções de massa seca (g/planta foram obtidas com cortes mensais a 8 cm (Maku = 13,3; S. Gabriel = 11,5; ARS2620 = 7,3. Em níveis intermediários (mensal - 4 cm; quinzenal - 8 cm, o cultivar Maku foi superior aos demais, enquanto, em cortes quinzenais (4 cm, não houve diferença entre os cultivares. O cultivar ARS2620 apresentou menor estatura e maior cobertura verde residual após os cortes. Na condição residual após o último corte, o cultivar Maku superou os demais quanto ao diâmetro da coroa e às produções de MS da raiz primária, subterrânea, aérea e de sóboles. Todos os cultivares foram favorecidos pelo manejo menos intenso, mas apresentaram mecanismos compensatórios ao serem manejados com cortes baixos em menor freqüência ou com cortes freqüentes, mas menos intensos. Os três cultivares apresentaram caules subterrâneos sobolíferos. A sobrevivência do cultivar São Gabriel e o sistema subterrâneo de Lotus spp. foram comprometidos em cortes intensos e freqüentes.This work aimed to compare Lotus spp. cultivars with different growth habits (L. corniculatus: cv. São Gabriel, semi-erect, cv. ARS2620, prostrate, and L. uliginosus: cv. Maku, decumbent, submitted to different height (4 - 8 cm and cutting frequencies (15 d and 30 d, between the 95th and 233rd days old, grown in pot. Greater DM production (g. plant-1 of DM was obtained under monthly cutting at 8 cm (Maku = 13.3; S. Gabriel = 11.5; ARS2620 = 7.3. Maku surpassed the others when intermediate levels (monthly cutting-4 cm; fortnighly cutting-8 cm were used; harvests every 15 d and at 4 cm resulted

  4. Antioxidant and carbohydrate changes of two pomegranate cultivars under deficit irrigation stress

    Directory of Open Access Journals (Sweden)

    Morteza Ebtedaie

    2016-12-01

    Full Text Available The purpose of this study was to evaluate the biochemical responses to water stress tolerance of two pomegranate cultivars, ‘Rabbab’ and ‘Shishehgap’. After the establishment of rooted stem cuttings of both cultivars under greenhouse conditions, they were treated with four levels of deficit irrigations (100%, 75%, 50% and 25% of field capacity in a completely randomized design with four replications. The results showed a significant difference between the two cultivars regarding antioxidant enzymes activities. In both cultivars, the water stress increased the activity of superoxide dismutase, catalase and ascorbate peroxidase. However, at high water deficit (25% field capacity, FC, ‘Rabbab’ showed significantly higher enzyme activity than ‘Shishehgap’. In each level of irrigation, there were not considerable differences in peroxidase activity between the two cultivars. An increment of 162% and 65.5% in soluble sugar was gained at 50% FC in ‘Rabbab’ and ‘Shishehgap’, respectively. ‘Rabbab’ showed better growth performance in each level of irrigation than ‘Shishehgap’. Therefore, it can be concluded that 'Rabbab', with lesser decline in leaf relative water content (RWC, a strong antioxidant system and accumulation of more soluble carbohydrates, can resist higher water stress than 'Shishehgap'.

  5. Antioxidant and carbohydrate changes of two pomegranate cultivars under deficit irrigation stress

    Energy Technology Data Exchange (ETDEWEB)

    Ebtedaie, M.; Shekafandeh, A.

    2016-07-01

    The purpose of this study was to evaluate the biochemical responses to water stress tolerance of two pomegranate cultivars, ‘Rabbab’ and ‘Shishehgap’. After the establishment of rooted stem cuttings of both cultivars under greenhouse conditions, they were treated with four levels of deficit irrigations (100%, 75%, 50% and 25% of field capacity) in a completely randomized design with four replications. The results showed a significant difference between the two cultivars regarding antioxidant enzymes activities. In both cultivars, the water stress increased the activity of superoxide dismutase, catalase and ascorbate peroxidase. However, at high water deficit (25% field capacity, FC), ‘Rabbab’ showed significantly higher enzyme activity than ‘Shishehgap’. In each level of irrigation, there were not considerable differences in peroxidase activity between the two cultivars. An increment of 162% and 65.5% in soluble sugar was gained at 50% FC in ‘Rabbab’ and ‘Shishehgap’, respectively. ‘Rabbab’ showed better growth performance in each level of irrigation than ‘Shishehgap’. Therefore, it can be concluded that 'Rabbab', with lesser decline in leaf relative water content (RWC), a strong antioxidant system and accumulation of more soluble carbohydrates, can resist higher water stress than 'Shishehgap'.

  6. Nanomechanical cutting of boron nitride nanotubes by atomic force microscopy

    International Nuclear Information System (INIS)

    Zheng, Meng; Chen, Xiaoming; Ke, Changhong; Park, Cheol; Fay, Catharine C; Pugno, Nicola M

    2013-01-01

    The length of nanotubes is a critical structural parameter for the design and manufacture of nanotube-based material systems and devices. High-precision length control of nanotubes by means of mechanical cutting using a scriber has not materialized due to the lack of the knowledge of the appropriate cutting conditions and the tube failure mechanism. In this paper, we present a quantitative nanomechanical study of the cutting of individual boron nitride nanotubes (BNNTs) using atomic force microscopy (AFM) probes. In our nanotube cutting measurements, a nanotube standing still on a flat substrate was laterally scribed by an AFM tip. The tip–tube collision force deformed the tube, and eventually fractured the tube at the collision site by increasing the cutting load. The mechanical response of nanotubes during the tip–tube collision process and the roles of the scribing velocity and the frictional interaction on the tip–tube collision contact in cutting nanotubes were quantitatively investigated by cutting double-walled BNNTs of 2.26–4.28 nm in outer diameter. The fracture strength of BNNTs was also quantified based on the measured collision forces and their structural configurations using contact mechanics theories. Our analysis reports fracture strengths of 9.1–15.5 GPa for the tested BNNTs. The nanomechanical study presented in this paper demonstrates that the AFM-based nanomechanical cutting technique not only enables effective control of the length of nanotubes with high precision, but is also promising as a new nanomechanical testing technique for characterizing the mechanical properties of tubular nanostructures. (paper)

  7. Characterization of reduced height mutant of emmer wheat var. NP200 (Triticum dicoccum)

    International Nuclear Information System (INIS)

    Suman, Sud; Nayeem, K.A.; Bhagwat, S.G.

    2006-01-01

    Full text: Emmer wheat commonly known as Khapli is cultivated on limited area in Tamil Nadu, Andhra Pradesh, Karnataka, Maharashtra and Gujarat. Although cultivation of emmer wheat is confirmed to a small area, improvement work in this species is gaining importance because of its potential for diabetic patients and high dietary fibre in comparison to durum and bread wheats. Emmer wheat cultivar NP200 is a selection from local wheats of Andhra Pradesh. The cultivar NP200 is tall and is prone to lodging leading to yield loss. Therefore, systematic effort to improve cultivar NP200 is needed with the objective to reduce height and introduce lodging tolerance and to improve harvest index. The cultivar NP200 was irradiated with γ-rays. A reduced height mutant with vigorous growth and high tillering was found in M2 population. The mutant was designated as HW1095. The progeny of mutant in M3 showed 35.7 percent reduction in height as compared to parent. The HW1095 mutant was subjected to gibberellic acid treatment at seedling stage and was found to be insensitive to gibberellic acid. An allele specific marker for major dwarfing gene Rht B1b was used to check the status of dwarfing gene in semi dwarf emmer (DDK1009, DDK1025, HW5013, HW5301 and MACS2961) and tall emmer (Np200 and NP201), semi dwarf durums (HD4502, HD4530, MACS2846) along with dwarf mutant (HW1095). The validity of primer in semi dwarf durums and emmer for Rht B 1b gene was found to be perfect. The parent variety NP200 showed presence of wild type allele (Rht B1a) with the primer pair BF-WR1. All semi dwarf emmer showed a band of 237 bp with primer pair BF-MR1. However, mutant (HW1095) showed absence of amplification for both Rht B1a and Rht B1b alleles with respective primer pairs. The results indicated that the reduced height mutant carried a mutation different than from the existing allele (Rht B1b)

  8. Banana Cultivar Mapping and Constraints Identification With Farmers in Southwest Kenya

    International Nuclear Information System (INIS)

    Onyago, M.; Makworo, S.; Njue, E.; Rees, D.

    1999-01-01

    Southwest Kenya is one of the major banana growing ares of Kenya and contributes about 40% of the country's production. Banana is an important crop in Kenya providing the small-scale resource poor farmers with food and the much-needed income. In southwest Kenya, Banana is a priority crop that is grown in a wide range of farms from backyard gardens to medium farms. Rapid Rural Appraisal (RRP) and Participatory Rural Appraisal (PRA) were conducted between January, 1996 and December 1997. The overall objective was to identify major constraints in specific areas, rank them with farmers and determine suitable interventions. The RRA and PRA revealed that farmers grow banana as a pure stand, intercropped with crops like maize, beans and groundnuts, in addition along the contour lines for soil conservation purpose. Diverse banana cultivars are grown in the region, of which some are localised while others are widespread. The major cultivars grown include 'Ekeganda', Kisukari', 'Ng'ombe' and 'Pisang Awak'. Pisang Awak was found prevalent in drier areas of Kendu Bay (LM 3 ) and very cold areas of Bomet (LH 1 ). Ekeganda is the most popular cooking type while Kisukari is a dessert type and is the second most popular banana cultivar in the region. Some of the constraints cut across the AEZs and include a complex of pests and diseases, poor orchard management, soil exhaustion because of land pressure, lack of superior cultivars and socioeconomic factors such as poor infrastructure. Panama disease, nematodes and banana weevil are prevalent at the medium and lower AEZs while moles are menace in the upper midlands and highland areas. To address some of the major constraints, on-farm banana cultivar evaluation trials were initiated in four AEZs namely LM 3-4 , LH 1 , UM 1 and LM 2 , respectively. Monitoring and evaluation of these cultivars by both researchers, extension and farmers is on-going

  9. Estimation of heritability and genetic gain in height growth in Ceiba ...

    African Journals Online (AJOL)

    However, there is relatively inefficient information available on the heritability and genetic gain in height growth in C. pentandra based on which selection and subsequent breeding could be made. This poses a major challenge to the production of new cultivars for the forestry industry of Ghana. The current study looked at ...

  10. Rooting and vegetative growth of hardwood cuttings of 12 pomegranate (Punica granatum L.) cultivars

    Science.gov (United States)

    Commercial pomegranate acreage has increased substantially in the western hemisphere due to increased consumer interest in the fruit. Low nursery inventory has caused many growers to propagate their own trees and the availability of only a few cultivars is believed to have played a role in a lack of...

  11. Side Flow Effect on Surface Generation in Nano Cutting.

    Science.gov (United States)

    Xu, Feifei; Fang, Fengzhou; Zhang, Xiaodong

    2017-12-01

    The side flow of material in nano cutting is one of the most important factors that deteriorate the machined surface quality. The effects of the crystallographic orientation, feed, and the cutting tool geometry, including tool edge radius, rake angle and inclination angle, on the side flow are investigated employing molecular dynamics simulation. The results show that the stagnation region is formed in front of tool edge and it is characterized by the stagnation radius R s and stagnation height h s . The side flow is formed because the material at or under the stagnation region is extruded by the tool edge to flow to the side of the tool edge. Higher stagnation height would increase the size of the side flow. The anisotropic nature of the material which partly determines the stagnation region also influences the side flow due to the different deformation mechanism under the action of the tool edge. At different cutting directions, the size of the side flow has a great difference which would finally affect the machined surface quality. The cutting directions of {100} , {110} , and {110}  are beneficial to obtain a better surface quality with small side flow. Besides that, the side flow could be suppressed by reducing the feed and optimizing the cutting tool geometry. Cutting tool with small edge radius, large positive rake angle, and inclination angle would decrease the side flow and consequently improve the machined surface quality.

  12. Herbage Production, Nutritive Value and Grazing Preference of Diploid and Tetraploid Perennial Ryegrass Cultivars (Lolium perenne L. Producción de Fitomasa, Calidad Nutritiva y Preferencia de Pastoreo de Cultivares Diploides y Tetraploides de Ballica Perenne (Lolium perenne L.

    Directory of Open Access Journals (Sweden)

    Oscar A Balocchi

    2009-09-01

    Full Text Available The objective of this study was to determine, under the soil and climatic conditions of Southern Chile, the effect of the ploidy of perennial ryegrass (Lolium perenne L. cultivars on herbage production, nutritive value, grazing preference and utilization of pasture produced. This study was conducted in southern Chile, Valdivia Province, and was evaluated for 3 years. The tetraploid cultivars used were Quartet (4n, Gwendal (4n, Pastoral (4n and Napoleon (4n. The diploid cultivars were Anita (2n, Jumbo (2n, Aries (2n, and Yatsyn 1 (2n.When the average sward height reached 20 cm, all plots were simultaneously grazed by dairy cows for a period of 24 h. Before and after grazing, sward height, dry matter availability and nutritive value were evaluated. Grazing preference was visually assessed every 5 min for a period of 2.5 h after the afternoon milking. During the 3-year period 20 grazing events were evaluated. A randomized complete block design, with eight cultivars and three replicates, was used. Diploid cultivars showed greater herbage mass accumulation than tetraploid cultivars (P ≤ 0.05. No significant differences were obtained in the annual average crude protein content. Nevertheless, tetraploid cultivars showed a greater D value than diploid cultivars, except during the third year when the difference was not statistically significant. Dairy cows grazed more time on tetraploid cultivars. Considering, additionally, the residual herbage mass after grazing and the percentage of pasture utilization, diploid cultivars were less intensively grazed, suggesting a lower consumption by the cows.El objetivo de este estudio fue determinar, bajo las condiciones edafoclimáticas del sur de Chile, el efecto de la ploidía de cultivares de ballica perenne (Lolium perenne L. sobre el rendimiento de fitomasa, calidad nutricional, preferencia de pastoreo y porcentaje de utilización del forraje producido. El ensayo se realizó en el sur de Chile, provincia de

  13. Evaluation of ITS2 for intraspecific identification of Paeonia lactiflora cultivars

    Directory of Open Access Journals (Sweden)

    Qian Li

    2017-09-01

    Full Text Available Herbaceous peony (Paeonia lactiflora Pall. is an important ornamental and medicinal plant. DNA barcodes can reveal species identity via the nucleotide diversity of short DNA segments. In this study, two main candidate DNA barcodes (ITS2 and psbA-trnH were tested to identify twenty-one cutting cultivars of P. lactiflora and their wild species. The efficacy of the candidate DNA barcodes was assessed by PCR amplification, sequence quality, sequence diversity, rate of correct identification, and phylogenetic analysis. ITS2 was easy to be amplified and sequenced among the samples. The identification by Blastn and phylogenetic analysis was 95.4% and 63.6%, respectively. For psbA-trnH, the presence of poly A-T led to sequencing failure which limited its use as DNA barcode candidate. Moreover, the authentic efficiency of psbA-trnH was lower than ITS2. The results showed that ITS2 is suitable as a candidate DNA barcode for the intraspecific identification of P. lactiflora cultivars.

  14. Involvement of Sodium Nitroprusside (SNP in the Mechanism That Delays Stem Bending of Different Gerbera Cultivars

    Directory of Open Access Journals (Sweden)

    Aung H. Naing

    2017-11-01

    Full Text Available Longevity of cut flowers of many gerbera cultivars (Gerbera jamesonii is typically short because of stem bending; hence, stem bending that occurs during the early vase life period is a major problem in gerbera. Here, we investigated the effects of sodium nitroprusside (SNP on the delay of stem bending in the gerbera cultivars, Alliance, Rosalin, and Bintang, by examining relative fresh weight, bacterial density in the vase solution, transcriptional analysis of a lignin biosynthesis gene, antioxidant activity, and xylem blockage. All three gerbera cultivars responded to SNP by delaying stem bending, compared to the controls; however, the responses were dose- and cultivar-dependent. Among the treatments, SNP at 20 mg L-1 was the best to delay stem bending in Alliance, while dosages of 10 and 5 mg L-1 were the best for Rosalin and Bintang, respectively. However, stem bending in Alliance and Rosalin was faster than in Bintang, indicating a discrepancy influenced by genotype. According to our analysis of the role of SNP in the delay of stem bending, the results revealed that SNP treatment inhibited bacterial growth and xylem blockage, enhanced expression levels of a lignin biosynthesis gene, and maintained antioxidant activities. Therefore, it is suggested that the cause of stem bending is associated with the above-mentioned parameters and SNP is involved in the mechanism that delays stem bending in the different gerbera cultivars.

  15. Composição química do capim-elefante cv. Roxo cortado em diferentes alturas Chemical composition of elephant grass var. Roxo cut at different heights

    Directory of Open Access Journals (Sweden)

    Estácio Alves dos Santos

    2001-02-01

    evaluated. The cutting heights did not influence the chemical composition of the grass, neither there was interaction with the seasons. Except for hemicellulose and ashes, the cut made in the dry season showed superior results than in the rainy season. The averages for the two periods were 19.70 and 17.44% for MS, 7.74 and 7.25% for CP, 76.41 and 71.13% for NDF, 42.75 and 41.02% for ADF, 31.44 and 30.43% for CEL, 30.66 and 30.28% for HCEL, 9.25 and 7.83% for LIG, and 1.97 and 3.38% for ashes, in dry and rainy seasons, respectively.

  16. Caracterização molecular de cultivares de cebola por marcadores RAPD Molecular characterization of onion cultivars by RAPD markers

    Directory of Open Access Journals (Sweden)

    Daniela L Leite

    2009-12-01

    Full Text Available Em plantas alógamas, as cultivares constituem uma fonte de variação genética planta-a-planta no qual o melhorista pode obter novos materiais. A variabilidade genética entre indivíduos ou populações tem sido medida através de marcadores moleculares. O objetivo deste trabalho foi avaliar molecularmente, através da análise de RAPD (Random Amplified Polimorphic DNA, a diversidade genética existente em um grupo de cultivares de cebola recomendadas para o cultivo na Região Sul do Brasil. Foram analisados 11 iniciadores em DNAs provenientes de um total de 90 plantas individuais oriundas das cultivares Baia Periforme, Bola Precoce, BRS Cascata, Crioula, Primavera e Roxa. As plantas foram genotipadas através dos produtos visualizados em gel de agarose e uma matriz de presença/ausência de bandas foi utilizada nas análises de similaridade genética (coeficiente de Jaccard e de agrupamento pelo método UPGMA. Os 11 iniciadores geraram 140 (86,4% bandas polimórficas. O número de fragmentos por iniciador variou de 10 (UBC105 até 18 (OPA10; OPC11; OPI1 com uma média de 15 bandas por iniciador. A técnica de RAPD mostrou-se eficiente na caracterização molecular, permitindo a formação de grupos de cultivares de acordo com a sua população de origem, com uma similaridade média de 63%. Conclui-se que as cultivares de cebola recomendadas para a Região Sul do Brasil, apresentam divergência genética, com potencial de serem exploradas por melhoristas, no desenvolvimento de genótipos superiores.In alogam plants, the cultivars constitute a source of plant-to-plant genetic variation from which the breeder can obtain new materials. Genetic variability among individuals or populations has been measured through molecular markers. The objective of this work was to evaluate the genetic diversity in a group of onion cultivars recommended for cultivation in the Southern Region of Brazil by RAPD (Random Amplified Polimorphic DNA analysis. Eleven

  17. An ergonomic study of the optimum operating table height for laparoscopic surgery.

    Science.gov (United States)

    Berquer, R; Smith, W D; Davis, S

    2002-03-01

    Laparoscopic surgery requires the use of longer instruments than open surgery, thus changing the relation between the height of the surgeon's hands and the desirable height of the operating room table. The optimum height of the operating room table for laparoscopic surgery is investigated in this study. Twenty-one surgeons performed a two-handed, one-fourth circle cutting task using a laparoscopic video system and laparoscopic instruments positioned at five instrument handle heights relative to subjects' elbow height (-20, -10, 0, +10, and +20 cm) by adjusting the height of the trainer box. Subjects rated the difficulty and discomfort experienced during each task on a visual analog scale. Skin conductance (SC) was measured in Micromhos via paired surface electrodes placed near the ulnar edge of the palm of the right (cutting) hand. The mean electromyographic (EMG) signal from the right deltoid and trapezius muscles was measured. Arm orientation was measured in three dimensions using a magnetometer/accelerometer. Signals were acquired using analog circuitry and digitally sampled using a National Instruments DAQCard 700 connected to a Macintosh PowerBook 5300c running LabVIEW software. Statistical analysis was carried out by analysis of variance and post hoc testing. Statistically significant changes were found in the subjective rating of discomfort (p operating room tables may be required to meet these ergonomic guidelines.

  18. Rooting, growth, and color mutation of poinsettias affected by gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eun Kyung; Kim, Won Hee; Kim, Seung Tae [National Institute of Horticultural and Herbal Science, RDA, Suwon (Korea, Republic of); Kang, Si Yong [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)

    2010-09-15

    This experiment was carried out to investigate the effects of gamma-radiation on the rooting, growth, and color mutation in poinsettia. Using 10 poinsettia varieties ('Lollipop', 'Little Peace', 'Happy Day', 'Early Bird', 'Pixy Red', 'Happy Time', 'Heidi', 'Red Bell', 'Clara', and 'Scarlet') bred by National Institute of Horticultural and Herbal Science, 100 Gy of gamma ray was irradiated at the stage of callused cuttings. Four weeks after sticking cuttings in the rooting media, 8 cultivars showed 100% of root formation, but 'Early Bird' rooted 24.4% and even died off during the cutting propagation. After planting rooted cuttings, survival rate until flowering time varied among irradiated cultivars. While 'Pixy Red' and 'Heidi' survived about 98%, 'Clara', 'Happy Day', and 'Early Bird' survived lesser than 30%. All irradiated plants showed remarkably shorter plant height, lesser branch numbers than non-irradiated control plants. Thirty color mutants were obtained among 281 plants survived until flowering time. Nine were complete color mutated branches, whereas 21 mutants were partially color mutated bracts and transitional leaves. Color patterns mutated by 100 Gy of gamma ray were divided into pink, hot pink, light red and spotted (pink spots with red main color). Pink mutants were commonly obtained. Complete color mutants were discovered from 4 plants of 'Pixy Red', 2 plants of 'Red Bell' and 3 plants of Lollipop.

  19. Genetic divergence of common bean cultivars.

    Science.gov (United States)

    Veloso, J S; Silva, W; Pinheiro, L R; Dos Santos, J B; Fonseca, N S; Euzebio, M P

    2015-09-22

    The aim of this study was to evaluate genetic divergence in the 'Carioca' (beige with brown stripes) common bean cultivar used by different institutions and in 16 other common bean cultivars used in the Rede Cooperativa de Pesquisa de Feijão (Cooperative Network of Common Bean Research), by using simple sequence repeats associated with agronomic traits that are highly distributed in the common bean genome. We evaluated 22 polymorphic loci using bulks containing DNA from 30 plants. There was genetic divergence among the Carioca cultivar provided by the institutions. Nevertheless, there was lower divergence among them than among the other cultivars. The cultivar used by Instituto Agronômico do Paraná was the most divergent in relation to the Carioca samples. The least divergence was observed among the samples used by Universidade Federal de Lavras and by Embrapa Arroz e Feijão. Of all the cultivars, 'CNFP 10104' and 'BRSMG Realce' showed the greatest dissimilarity. The cultivars were separated in two groups of greatest similarity using the Structure software. Genetic variation among cultivars was greater than the variation within or between the groups formed. This fact, together with the high estimate of heterozygosity observed and the genetic divergence of the samples of the Carioca cultivar in relation to the original provided by Instituto Agronômico de Campinas, indicates a mixture of cultivars. The high divergence among cultivars provides potential for the utilization of this genetic variability in plant breeding.

  20. Cultivar identification and genetic relationship of pineapple (Ananas comosus) cultivars using SSR markers.

    Science.gov (United States)

    Lin, Y S; Kuan, C S; Weng, I S; Tsai, C C

    2015-11-25

    The genetic relationships among 27 pineapple [Ananas comosus (L.) Merr.] cultivars and lines were examined using 16 simple sequence repeat (SSR) markers. The number of alleles per locus of the SSR markers ranged from 2 to 6 (average 3.19), for a total of 51 alleles. Similarity coefficients were calculated on the basis of 51 amplified bands. A dendrogram was created according to the 16 SSR markers by the unweighted pair-group method. The banding patterns obtained from the SSR primers allowed most of the cultivars and lines to be distinguished, with the exception of vegetative clones. According to the dendrogram, the 27 pineapple cultivars and lines were clustered into three main clusters and four individual clusters. As expected, the dendrogram showed that derived cultivars and lines are closely related to their parental cultivars; the genetic relationships between pineapple cultivars agree with the genealogy of their breeding history. In addition, the analysis showed that there is no obvious correlation between SSR markers and morphological characters. In conclusion, SSR analysis is an efficient method for pineapple cultivar identification and can offer valuable informative characters to identify pineapple cultivars in Taiwan.

  1. Genetic studies on two soybean cultivars irradiated with gamma rays

    International Nuclear Information System (INIS)

    El-Demerdash, H.M.

    2007-01-01

    In the present study, the effect of gamma irradiation was used in two Egyptian soybean cultivars; Giza-22 and Giza-82, to induce genetic variability with doses of 100, 150 and 200 Gy. Some agronomic characters were tested in M1 and M2 generations single plants. Oil and protein contents were measured from the resulted mutants of the two soybean cultivars at M2 generation. Some genetic parameters were estimated on the mean values of M2 generation. The results showed significant differences induced by gamma ray doses in all studied characters, particularly for 200 Gy in M1 generation. Gamma irradiation increased the genetic variability in M2 generation, which helped in selecting some high yielding mutants and some mutants with high oil and protein contents from the two cultivars. The estimated coefficients of phenotypic variance as well as coefficient of genotypic variance were high for seeds weight/plant, pod weight/plant, number of seeds/plant, number of pods/plant and number of nods/plant which showed better scope in genetic improvement. Heritability in the broad sense was high in most of the studied characters. The expected genetic advance (G.A) from selection was high for number of seeds, for number of pods, for pods weight and for mature plant height

  2. STRUCTURAL ANNOTATION OF EM IMAGES BY GRAPH CUT

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Hang; Auer, Manfred; Parvin, Bahram

    2009-05-08

    Biological images have the potential to reveal complex signatures that may not be amenable to morphological modeling in terms of shape, location, texture, and color. An effective analytical method is to characterize the composition of a specimen based on user-defined patterns of texture and contrast formation. However, such a simple requirement demands an improved model for stability and robustness. Here, an interactive computational model is introduced for learning patterns of interest by example. The learned patterns bound an active contour model in which the traditional gradient descent optimization is replaced by the more efficient optimization of the graph cut methods. First, the energy function is defined according to the curve evolution. Next, a graph is constructed with weighted edges on the energy function and is optimized with the graph cut algorithm. As a result, the method combines the advantages of the level set method and graph cut algorithm, i.e.,"topological" invariance and computational efficiency. The technique is extended to the multi-phase segmentation problem; the method is validated on synthetic images and then applied to specimens imaged by transmission electron microscopy(TEM).

  3. Transformation of multiple soybean cultivars by infecting ...

    African Journals Online (AJOL)

    Transformation of multiple soybean cultivars by infecting cotyledonary-node with Agrobacterium tumefaciens. ... In our study, the combination of Nannong88-1 with EHA105 is the optimum selection for explant and bacterial inoculum in soybean transformation, which could be applied in future functional study of soybean ...

  4. Identificação de cultivares de trigo pelo teste de fenol Cultivars identification of wheat by phenol test

    Directory of Open Access Journals (Sweden)

    Nilson Lemos de Menezes

    1995-01-01

    Full Text Available O teste de fenol é recomendado para a identificação de cultivares de trigo em laboratório e se baseia na reação de compostos presentes no pericarpo das sementes. Devido à reação constante para cada cultivar, o teste serve para caracterização rápida e fácil de materiais com reações diferentes. No presente trabalho, com o objetivo de facilitar a identificação varietal em trigo, determinou-se a reação ao fenol de 42 cultivares, que estiveram ou estão em recomendação no Brasil.The phenol test is recommended for wheat cultivar identification and is based on the reaction of compounds present in the seeds pericarp. Due to the constant reaction for each cultivar, the test may be used for a rapid and easy characterization of different reactions materiais. In this essay, the phenol reaction was determined in 42 brazilian wheat varieties aiming to facilitate its identification.

  5. Effect of Increase in Plant Density on Stem Yield and Sucrose Content in Two Sweet Sorghum Cultivars

    Directory of Open Access Journals (Sweden)

    A Soleymani

    2011-01-01

    Full Text Available Abstract In order to evaluate the effect of increase plant density on stalk yield and sucrose content in two sweet sorghum cultivars, an experiment was conducted at Research Farm of Isfahan University located at Zaghmar village. A split plot layout within a randomized complete block design with tree replication was used. Main plots were plant densities (100, 200, 300, 400, 500 and 600 thousand plant/ha and subplots were cultivars (Rio and Keller. The effect of plant density at hard dough harvest stage on plant height, stem diameter, number of tillers, stem fresh weight and juice yield were significant but had no significant effect on brix, sucrose percentage and purity. The highest juice yield and purity were produced by 400 thousand plants/ha. Keller was significantly superior for plant height, stem diameter, stem fresh weight, juice yield and brix at hard dough harvest stage as compared to Rio. Number of tiller per plant of Rio was significantly more than Keller. There were no significant difference between two cultivars for sucrose percentage and purity but sucrose percentage in Keller had highest as compared to Rio. Maximum stem fresh weight, juice yield, sucrose percentage and purity were obtained at hard dough harvest stag. On the basis of the results obtained, 400 thousand plant/ha plant density, Keller cultivar and hard dough harvest stage might be suitable for sweet sorghum production under the condition similar to the present study. Keywords: Sweet sorghum, Stem yield, Sucrose percentage, Harvesting stages

  6. Root Differentiation of Agricultural Plant Cultivars and Proveniences Using FTIR Spectroscopy

    Directory of Open Access Journals (Sweden)

    Nicole Legner

    2018-06-01

    Full Text Available The differentiation of roots of agricultural species is desired for a deeper understanding of the belowground root interaction which helps to understand the complex interaction in intercropping and crop-weed systems. The roots can be reliably differentiated via Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR. In two replicated greenhouse experiments, six pea cultivars, five oat cultivars as well as seven maize cultivars and five barnyard grass proveniences (n = 10 plants/cultivar or provenience were grown under controlled conditions. One root of each plant was harvested and five different root segments of each root were separated, dried and measured with FTIR-ATR spectroscopy. The results showed that, firstly, the root spectra of single pea and single oat cultivars as well as single maize and single barnyard grass cultivars/proveniences separated species-specific in cluster analyses. In the majority of cases the species separation was correct, but in a few cases, the spectra of the root tips had to be omitted to ensure the precise separation between the species. Therefore, species differentiation is possible regardless of the cultivar or provenience. Consequently, all tested cultivars of pea and oat spectra were analyzed together and separated within a cluster analysis according to their affiliated species. The same result was found in a cluster analysis with maize and barnyard grass spectra. Secondly, a cluster analysis with all species (pea, oat, maize and barnyard grass was performed. The species split up species-specific and formed a dicotyledonous pea cluster and a monocotyledonous cluster subdivided in oat, maize and barnyard grass subclusters. Thirdly, cultivar or provenience differentiations within one species were possible in one of the two replicated experiments. But these separations were less resilient.

  7. Cultivar effects of perennial ryegrass on herbage intake by grazing dairy cows

    NARCIS (Netherlands)

    Smit, H.J.

    2006-01-01

    Perennial ryegrass is the most abundant grass species in temperate climates. An increased herbage intake of dairy cows by breeding new cultivars could have a large potential impact on agriculture. The effects of cultivars on sward structure, nutritive value, physical characteristics and disease

  8. Optimizing rate of nitrogen application for higher growth and yield of wheat (triticum aestivum l.) cultivars

    International Nuclear Information System (INIS)

    Maqsood, M.; Shehzad, M.A.; Asim, A.; Ahmad, W.

    2012-01-01

    In order to optimize the nitrogen rates in three wheat (Triticum aestivum L.) cultivars for obtaining higher grain yield, a split plot experiment based on Randomized Complete Block Design with three replicates was conducted in the research field of University of Agriculture, Faisalabad during Rabi season 2006-07. Among treatments nitrogen levels (N0= 0, N/sub 1/= 50, N2= 100, N3= 150 kg ha/sup -1/) in main while wheat cultivars (V1= Punjnad-I, V/sub 2/= Fareed-2006, V3=Uqab-2000) were allocated in sub plots during the course of growing season. Traits as plant height, fertile tillers, spike length, spikelets spike-1, grains spike-1, 1000-grain weight, straw yield, grain yield and harvest index (HI) were significantly (P=0.05) affected by treatment combinations. Maximum grain yield was obtained by V3 (Uqab-2000) cultivar when treated with N3 (150 kg ha/sup -1/) fertilizer level. Also, results showed that with increasing nitrogen rates, wheat yield increases significantly up to a level of significance (P=0.05). Increasing nitrogen levels led to significantly increase in plant height (101.81 cm), spike bearing tillers (495.77), grains spike/sup -1/ (61.45), straw yield (8.60 t ha/sup -1/) and harvest index (36.17%) of V3 (Uqab-2000). In all traits except germination count, V3 (Uqab-2000) was found to be superior. (author)

  9. Extending the durability of cultivar resistance by limiting epidemic growth rates.

    Science.gov (United States)

    Carolan, Kevin; Helps, Joe; van den Berg, Femke; Bain, Ruairidh; Paveley, Neil; van den Bosch, Frank

    2017-09-27

    Cultivar resistance is an essential part of disease control programmes in many agricultural systems. The use of resistant cultivars applies a selection pressure on pathogen populations for the evolution of virulence, resulting in loss of disease control. Various techniques for the deployment of host resistance genes have been proposed to reduce the selection for virulence, but these are often difficult to apply in practice. We present a general technique to maintain the effectiveness of cultivar resistance. Derived from classical population genetics theory; any factor that reduces the population growth rates of both the virulent and avirulent strains will reduce selection. We model the specific example of fungicide application to reduce the growth rates of virulent and avirulent strains of a pathogen, demonstrating that appropriate use of fungicides reduces selection for virulence, prolonging cultivar resistance. This specific example of chemical control illustrates a general principle for the development of techniques to manage the evolution of virulence by slowing epidemic growth rates. © 2017 The Author(s).

  10. Height perception influenced by texture gradient.

    Science.gov (United States)

    Tozawa, Junko

    2012-01-01

    Three experiments were carried out to examine whether a texture gradient influences perception of relative object height. Previous research implicated texture cues in judgments of object width, but similar influences have not been demonstrated for relative height. In this study, I evaluate a hypothesis that the projective ratio of the number of texture elements covered by the objects combined with the ratio of the retinal object heights determines percepts of relative object height. Density of texture background was varied: four density conditions ranged from no-texture to very dense texture. In experiments 1 and 2, participants judged the height of comparison bar compared to the standard bar positioned on no-texture or textured backgrounds. Results showed relative height judgments differed with texture manipulations, consistent with predictions from a hypothesised combination of the number of texture elements with retinal height (experiment 1), or partially consistent with this hypothesis (experiment 2). In experiment 2, variations in the position of a comparison object showed that comparisons located far from the horizon were judged more poorly than in other positions. In experiment 3 I examined distance perception; relative distance judgments were found to be also affected by textured backgrounds. Results are discussed in terms of Gibson's relational theory and distance calibration theory.

  11. Selection of drought tolerant and high water use efficient rice cultivars through /sup 13/C isotope discrimination technique

    International Nuclear Information System (INIS)

    Akhtar, J.; Sabir, S.A.; Ashraf, M.Y.; Monneveux, P.; Serraj, R.

    2010-01-01

    Carbon isotope discrimination ('A') has been suggested as an indirect tool for selecting plants having higher water use efficiency (WUE) and yield potential. Enhancing WUE is an important breeding objective as water scarcity is increasing with every passing day. This study was undertaken to assess the genotypic variation and relationship between leaf, straw, grain 'A', grain yield and WUE in eight aromatic rice cultivars grown in lysimeters under three water regimes, in absence of drainage and runoff. Highly significant positive correlations were found between aboveground biomass and WUEB, and grain yield and WUEG, due to the low variation in water consumed by different cultivars. Leaf, straw and grain A showed a consistent variation across treatments and cultivars. Under water stress conditions, both leaf and straw 'A' were positively correlated to grain yield and WUEG. In all the water treatments, WUEG was positively correlated to harvest index and negatively to plant height. All the mutants from Basmati 385 had significantly higher 'A' values as compared to the mutants from Basmati 370. It was concluded that the new cultivar, Basmati 385, represents a better genetic source for 'A' improvement than the old cultivar, Basmati 370. (author)

  12. Raised BMI cut-off for overweight in Greenland Inuit – a review

    Science.gov (United States)

    Andersen, Stig; Fleischer Rex, Karsten; Noahsen, Paneeraq; Sørensen, Hans Christian Florian; Mulvad, Gert; Laurberg, Peter

    2013-01-01

    Background Obesity is associated with increased morbidity and premature death. Obesity rates have increased worldwide and the WHO recommends monitoring. A steep rise in body mass index (BMI), a measure of adiposity, was detected in Greenland from 1963 to 1998. Interestingly, the BMI starting point was in the overweight range. This is not conceivable in a disease-free, physically active, pre-western hunter population. Objective This led us to reconsider the cut-off point for overweight among Inuit in Greenland. Design and findings We found 3 different approaches to defining the cut-off point of high BMI in Inuit. First, the contribution to the height by the torso compared to the legs is relatively high. This causes relatively more kilograms per centimetre of height that increases the BMI by approximately 10% compared to Caucasian whites. Second, defining the cut-off by the upper 90-percentile of BMI from height and weight in healthy young Inuit surveyed in 1963 estimated the cut-off point to be around 10% higher compared to Caucasians. Third, if similar LDL-cholesterol and triglycerides are assumed for a certain BMI in Caucasians, the corresponding BMI in Inuit in both Greenland and Canada is around 10% higher. However, genetic admixture of Greenland Inuit and Caucasian Danes will influence this difference and hamper a clear distinction with time. Conclusion Defining overweight according to the WHO cut-off of a BMI above 25 kg/m2 in Greenland Inuit may overestimate the number of individuals with elevated BMI. PMID:23986904

  13. Raised BMI cut-off for overweight in Greenland Inuit – a review

    Directory of Open Access Journals (Sweden)

    Stig Andersen

    2013-08-01

    Full Text Available Background. Obesity is associated with increased morbidity and premature death. Obesity rates have increased worldwide and the WHO recommends monitoring. A steep rise in body mass index (BMI, a measure of adiposity, was detected in Greenland from 1963 to 1998. Interestingly, the BMI starting point was in the overweight range. This is not conceivable in a disease-free, physically active, pre-western hunter population. Objective. This led us to reconsider the cut-off point for overweight among Inuit in Greenland. Design and findings. We found 3 different approaches to defining the cut-off point of high BMI in Inuit. First, the contribution to the height by the torso compared to the legs is relatively high. This causes relatively more kilograms per centimetre of height that increases the BMI by approximately 10% compared to Caucasian whites. Second, defining the cut-off by the upper 90-percentile of BMI from height and weight in healthy young Inuit surveyed in 1963 estimated the cut-off point to be around 10% higher compared to Caucasians. Third, if similar LDL-cholesterol and triglycerides are assumed for a certain BMI in Caucasians, the corresponding BMI in Inuit in both Greenland and Canada is around 10% higher. However, genetic admixture of Greenland Inuit and Caucasian Danes will influence this difference and hamper a clear distinction with time. Conclusion. Defining overweight according to the WHO cut-off of a BMI above 25 kg/m2 in Greenland Inuit may overestimate the number of individuals with elevated BMI.

  14. Common bean grain yield as affected by sulfur fertilization and cultivars

    Directory of Open Access Journals (Sweden)

    Adriano Stephan Nascente

    Full Text Available ABSTRACT A better understanding of the differential growth of common bean cultivars with increasing soil sulfur (S availability can indicate how to improve common bean grain yield in soils of Savannas. The objective of this study was to evaluate the response of sprinkler-irrigated common bean cultivars to sulfur fertilization in a no-tillage system. The experiment was designed as a randomized block in a split-plot scheme with sulfur rates (0, 10, 20, 40, and 60 kg ha-1 as main plots and common bean cultivars (BRS Requinte, BRS Cometa, Diamante Negro, BRS Grafite, BRS Valente, and Corrente as subplots, with three replications. Common bean cultivars did not differ regarding grain yield response to sulfur rates, which fitted to a quadratic equation. Among the cultivars tested, only BRS Requinte and BRS Valente differed in grain yield for S fertilization, the first being more productive. Moreover, S fertilization allows significant increases in common bean grain yield in average of six cultivars and must be considered in cropping systems aiming for high yields.

  15. Performance of sorghum cultivars for biomass quality and biomethane yield grown in semi-arid area of Pakistan.

    Science.gov (United States)

    Hassan, Muhammad Umair; Chattha, Muhammad Umer; Mahmood, Athar; Sahi, Shahbaz Talib

    2018-05-01

    Biomass is a promising renewable energy source and its significance is escalating in the context of climate change and depletion of fossil foils. This study was conducted for two consecutive years 2016 and 2017, using five sorghum cultivars, i.e., JS-263, Jawar-2011, Hagari, JS-2002, and YS-2016, in order to determine the best cultivars in terms of dry matter yield, chemical composition, and biomethane yield grown under semi-arid conditions in Pakistan. The results revealed that sorghum cultivars responded differently in terms of growth, biomass yield, chemical composition, and methane yield. Cultivars Jawar-2011 produced maximum leaf area index, leaf area duration, crop growth rate, plant height, and leaves per plant, however, they were comparable with Sorghum-2016, whereas cultivar JS-2002 performed poorly among the tested cultivars. Similarly, cultivar Jawar-2011 produced maximum dry matter yield (16.37 t ha -1 ) similar to that of YS-2016, further cultivar JS-2002 performed poorly and gave lower dry matter yield (12.87 t ha -1 ). The maximum protein concentration (10.95), neutral detergent fibers (61.20), and lignin contents (5.55) found in Jawar-2011 were comparable with those in YS-2016, while the lowest neutral detergent fiber and lignin contents were found in JS-2002. Although JS-2002 produced the highest specific methane yield per kilogram of volatile solids, it was overcompensated by Jawar-2011 owing to higher dry matter yield per hectare. These results suggested that cultivar Jawar-2011 can be grown successfully in semi-arid conditions of Pakistan in order to get good biomass yield along with higher methane yield.

  16. Trends and Cut-Point Changes in Obesity Parameters by Age Groups Considering Metabolic Syndrome.

    Science.gov (United States)

    Park, Hyung Jun; Hong, Young Ho; Cho, Yun Jung; Lee, Ji Eun; Yun, Jae Moon; Kwon, Hyuktae; Kim, Sang Hyuck

    2018-02-12

    Non-communicable diseases (NCDs) are an important issue worldwide. Obesity has a close relationship with NCDs. Various age-related changes should be considered when evaluating obesity. National representative cohort data from the National Health Insurance Service National Sample Cohort from 2012 to 2013 were used. Sex-specific and age group-specific (10-year intervals) means for body mass index (BMI), waist circumference (WC), and waist-to-height ratio (WtHR) were calculated. Optimal cut-points for obesity parameters were defined as the value predicting two or more components of metabolic syndrome (except WC). The mean value and optimal cut-point for BMI decreased with age for men. The mean BMI value for women increased with age, but optimal cut-points showed no remarkable difference. The mean WC of men increased with age, but the optimal cut-points were similar for age groups. For women, the mean value and optimal cut-point for WC increased with age. Regarding WtHR, the mean value and optimal cut-point increased with age for men and women. Differences across age groups were larger for women. The mean values of the obesity indices and the optimal cut-points were changed according to age groups. This study supports the necessity of applying age group-specific cut-points for the various obesity parameters. © 2018 The Korean Academy of Medical Sciences.

  17. Recovery of nitrogen fertilizer by traditional and improved rice cultivars in the Bhutan Highlands

    DEFF Research Database (Denmark)

    Ghaley, Bhim Bahadur; Jensen, Henning Høgh; Christiansen, Jørgen Lindskrog

    2010-01-01

    The recovery of soil derived nitrogen (NDFS) and fertilizer N (NDFF) was investigated in highland rice (Oryza sativa L.) fields in Bhutan, characterized by high inputs of farmyard manure (FYM). The effect of 60 kg N ha-1 (60 N) applied in two splits to a traditional and an improved cultivar......% respectively, with no difference between cultivars, but REN decreased with increasing FYM inputs. Fertilizer N recommendations that allow for previous FYM inputs combined with applications timed to coincide with maximum crop demand (45 DAT), and the use of improved cultivars, could enhance N fertilizer......, popular among the farmers, was investigated using the 15N isotope dilution technique. No differences were found between cultivars with respect to the uptake of NDFS and NDFF, but the improved cultivar yielded 27% more (P¿=¿0.05) grain compared with the traditional cultivar. This was largely due to its...

  18. Linkage disequilibrium mapping of morphological, resistance, and other agronomically relevant traits in modern spring barley cultivars

    NARCIS (Netherlands)

    Kraakman, A.T.W.; Martinez, F.; Mussiraliev, B.; Eeuwijk, van F.A.; Niks, R.E.

    2006-01-01

    A set of 148 modern spring barley cultivars was explored for the extent of linkage disequilibrium (LD) between genes governing traits and nearby marker alleles. Associations of agronomically relevant traits (days to heading, plant height), resistance traits (leaf rust, barley yellow dwarf virus

  19. The membrane may be an important factor in browning of fresh-cut pear.

    Science.gov (United States)

    Li, Zhenghong; Zhang, Yuxing; Ge, Huibo

    2017-09-01

    Surface browning is an important cause of deterioration of fresh-cut fruit during postharvest handling. In this paper, four pear cultivars with different extents of natural browning were selected to analyse the factors involved in browning. The main results are as follows: the lipoxygenase (LOX) activity of 'Mantianhong' and 'Yali' pears was higher accompanied by a stronger degree of browning, while the LOX activity in 'Xueqing' and 'Xinli 7' pears was lower, with less browning. A higher unsaturated fatty acid ratio of pear resulted in reduced browning. The cell membranes disappeared 30min after being cut in 'Mantianhong' pear, which browns easily; however, the cell membranes were still intact 30min after being cut in 'Xueqing' pear, which does not brown easily. Therefore, it can be assumed that the stability of the cell membrane plays an important role in inhibiting browning of fresh-cut pears. Copyright © 2017. Published by Elsevier Ltd.

  20. Wheat cultivar tolerance to boron deficiency and toxicity in nutrient solution

    Directory of Open Access Journals (Sweden)

    Furlani Ângela Maria Cangiani

    2003-01-01

    Full Text Available Field symptoms of open spikelets in wheat were observed in specific cultivars and supposedly related to low B soils and differential B requirement among cultivars. This study aimed to evaluate the response of four wheat (Triticum aestivum L. cultivars, IAC 24, IAC 60, IAC 287 and IAC 289, to increasing B concentrations in nutrient solution. The experiment was set up in a randomized complete block design, with four replicates and five B concentrations (0.0, 0.05, 0.2, 0.8 and 2.0 mg L-1, during 1997/1998, in a greenhouse. Plants were grown to maturity and evaluated for plant height, spike number and length, open spikelet number, grains per spike, plant parts dry matter, B, P, K, Ca and Mg leaf concentrations and total nutrient contents. The visual symptoms of B deficiency consisted of open spikelets, distorted spikes without grains. 'IAC 60' and 'IAC 287' had higher B efficiency, with the highest grain yields in lower B concentrations. The 'IAC 287' and 'IAC 24' were more tolerant to the highest B concentrations. 'IAC 24' required more B for grain production as compared to the other cultivars. The critical leaf B concentration for deficiency was 25 mg kg-1 of dry matter tissue for all cultivars, and for toxicity were: 44 to 45 mg kg-1 for 'IAC 60' and 'IAC 289'; 228 and 318 mg kg-1 for 'IAC 24' and 'IAC 287', respectively. Except for the highest B level in the nutrient solution, the leaf P, K, Ca and Mg concentrations and whole plant contents were in an adequate range in the plants and did not vary among cultivars.

  1. Methods to classify maize cultivars in use efficiency and response to nitrogen

    Directory of Open Access Journals (Sweden)

    Cleiton Lacerda Godoy

    2013-10-01

    Full Text Available n plant breeding programs that aim to obtain cultivars with nitrogen (N use efficiency, the focus is on methods of selection and experimental procedures that present low cost, fast response, high repeatability, and can be applied to a large number of cultivars. Thus, the objectives of this study were to classify maize cultivars regarding their use efficiency and response to N in a breeding program, and to validate the methodology with contrasting doses of the nutrient. The experimental design was a randomized block with the treatments arranged in a split-plot scheme with three replicates and five N doses (0, 30, 60, 120 and 200 kg ha-1 in the plots, and six cultivars in subplots. We compared a method examining the efficiency and response (ER with two contrasting doses of N. After that, the analysis of variance, mean comparison and regression analysis were performed. In conclusion, the method of the use efficiency and response based on two N levels classifies the cultivars in the same way as the regression analysis, and it is appropriate in plant breeding routine. Thus, it is necessary to identify the levels of N required to discriminate maize cultivars in conditions of low and high N availability in plant breeding programs that aim to obtain efficient and responsive cultivars. Moreover, the analysis of the interaction genotype x environment at experiments with contrasting doses is always required, even when the interaction is not significant.

  2. Enraizamento de estacas semilenhosas de mirtilo sob o efeito de diferentes concentrações de ácido indolbutírico Rooting of semi-hardwood cuttings of blueberry under different indolebutyric acid concentrations

    Directory of Open Access Journals (Sweden)

    Doralice Lobato de Oliveira Fischer

    2008-06-01

    Full Text Available Dentre os métodos de multiplicação, o mirtilo pode ser propagado por sementes, rebentos, micropropagação e estaquia. Comercialmente, a propagação por meio de estaca é o método mais utilizado, proporcionando resultados diversos de acordo com a cultivar. Objetivou-se, com este trabalho, avaliar o efeito do ácido indolbutírico (AIB no enraizamento de estacas semilenhosas de mirtilo das cultivares Delite e Bluebelle, coletadas em dezembro/2005. O material utilizado, oriundo de plantas irrigadas, foi segmento de ramos principais, com quatro gemas e diâmetro médio de 6 mm, contendo duas folhas na extremidade superior, cortadas pela metade. Após o preparo, as estacas foram tratadas com AIB, nas concentrações de 0; 1.000; 2.000 e 4.000 mg. L-1, sendo colocadas para enraizar em areia de granulometria grossa lavada, sob irrigação intermitente por microaspersão. O delineamento experimental utilizado foi em blocos ao acaso, com quatro repetições e dez estacas por parcela. Para a cultivar Bluebelle, o uso de AIB na concentração de 1.000 mg.L-1 propiciou, aos 120 dias após a instalação do experimento, maior número e comprimento de raízes, número e comprimento de brotações e enraizamento de 37,5%. A cultivar Delite apresentou maior facilidade de emissão de raízes e brotações, independentemente do uso de AIB, com percentual de estacas enraizadas superior a 82,5%.Blueberries can be propagated by a variety of methods such as seeds, suckers, micropropagation and cuttings. Commercially, most propagation is done by cutting, providing different results depending on the cultivar. Thus, the objective of this research was to evaluate the indolebutyric acid (IBA effect on rooting of semi-hardwood cuttings of blueberry cultivars Delite and Bluebelle collected on December/2005. Four-node segments with 6 mm approximately, containing 2 upper leaves cut in half were taken from main branches of irrigated plants. After preparation, the

  3. Genetic characterization of autochthonous grapevine cultivars from Eastern Turkey by simple sequence repeats (SSRs

    Directory of Open Access Journals (Sweden)

    Sadiye Peral Eyduran

    2016-01-01

    Full Text Available In this research, two well-recognized standard grape cultivars, Cabernet Sauvignon and Merlot, together with eight historical autochthonous grapevine cultivars from Eastern Anatolia in Turkey, were genetically characterized by using 12 pairs of simple sequence repeat (SSR primers in order to evaluate their genetic diversity and relatedness. All of the used SSR primers produced successful amplifications and revealed DNA polymorphisms, which were subsequently utilized to evaluate the genetic relatedness of the grapevine cultivars. Allele richness was implied by the identification of 69 alleles in 8 autochthonous cultivars with a mean value of 5.75 alleles per locus. The average expected heterozygosity and observed heterozygosity were found to be 0.749 and 0.739, respectively. Taking into account the generated alleles, the highest number was recorded in VVC2C3 and VVS2 loci (nine and eight alleles per locus, respectively, whereas the lowest number was recorded in VrZAG83 (three alleles per locus. Two main clusters were produced by using the unweighted pair-group method with arithmetic mean dendrogram constructed on the basis of the SSR data. Only Cabernet Sauvignon and Merlot cultivars were included in the first cluster. The second cluster involved the rest of the autochthonous cultivars. The results obtained during the study illustrated clearly that SSR markers have verified to be an effective tool for fingerprinting grapevine cultivars and carrying out grapevine biodiversity studies. The obtained data are also meaningful references for grapevine domestication.

  4. Aroma profile and volatiles odor activity along gold cultivar pineapple flesh.

    Science.gov (United States)

    Montero-Calderón, Marta; Rojas-Graü, María Alejandra; Martín-Belloso, Olga

    2010-01-01

    Physicochemical attributes, aroma profile, and odor contribution of pineapple flesh were studied for the top, middle, and bottom cross-sections cut along the central axis of Gold cultivar pineapple. Relationships between volatile and nonvolatile compounds were also studied. Aroma profile constituents were determined by headspace solid-phase microextraction at 30 °C, followed by gas chromatography/mass spectrometry analysis. A total of 20 volatile compounds were identified and quantified. Among them, esters were the major components which accounted for 90% of total extracted aroma. Methyl butanoate, methyl 2-methyl butanoate, and methyl hexanoate were the 3 most abundant components representing 74% of total volatiles in pineapple samples. Most odor active contributors were methyl and ethyl 2-methyl butanoate and 2,5-dimethyl 4-methoxy 3(2H)-furanone (mesifuran). Aroma profile components did not vary along the fruit, but volatile compounds content significantly varied (P fresh-cut pineapple trays, compromising consumer perception and acceptance of the product. Such finding highlighted the need to include volatiles content and SSC/TA ratio and their variability along the fruit as selection criteria for pineapples to be processed and quality assessment of the fresh-cut fruit. © 2010 Institute of Food Technologists®

  5. Enraizamento de estacas semilenhosas de lichieira utilizando ácido indolbutírico Rooting of semi-hardwood litchi cuttings using indolbutiric acid

    Directory of Open Access Journals (Sweden)

    Carlos Miranda Carvalho

    2005-04-01

    :1 carbonized rice husk. After 100 days, the data referring to live cuttings with leaves percentage, the rooted cuttings percentage for each parcel, average root length per rooted cutting (in centimeters, average number of roots formed per cutting, average weight of the roots fresh matter (in grams were obtained, average weight of the root dry matter(in grams were obtained. By the results it was concluded that there is no need of indolbutiric acid for the litchi cuttings, Bengal cultivar rooting and the best time for collecting the cuttings is summer.

  6. Kinetic parameters of silicon uptake by rice cultivars

    Directory of Open Access Journals (Sweden)

    Priscila Oliveira Martins

    2012-02-01

    Full Text Available Silicon is considered an important chemical element for rice, because it can improve tolerance to biotic and abiotic stress. However, in many situations no positive effect of silicon was observed, probably due to genetic factors. The objective of this research was to monitor Si uptake kinetics and identify responses of rice cultivars in terms of Si uptake capacity and use. The experiment was carried out in a greenhouse of the São Paulo State University (UNESP, Brazil. The experiment was arranged in a completely randomized, factorial design with three replications. that consisted of two rice cultivars and two Si levels. Kinetic parameters (Vmax, Km, and Cmin, root morphology variables, dry matter yield, Si accumulation and levels in shoots and roots, uptake efficiency, utilization efficiency, and root/shoot ratio were evaluated. Higher Si concentrations in the nutrient solution did not increase rice dry matter. The development of the low-affinity silicon uptake system of the rice cultivar 'Caiapó' was better than of 'Maravilha'.

  7. Crescimento inicial de duas cultivares de cafeeiro adensado influenciado por níveis de irrigação localizada Initial growth of two high-density coffee tree cultivars influenced by drip irrigation levels

    Directory of Open Access Journals (Sweden)

    Márcio S. Santana

    2004-12-01

    Full Text Available O experimento foi conduzido na Fazenda Água Limpa, Universidade de Brasília, tendo como objetivo avaliar o crescimento das cultivares de café IAPAR-59 e Obatã, submetidas a cinco níveis de irrigação por gotejamento durante o primeiro ano de formação e estudar formas de manejo da água do solo. O delineamento experimental usado foi o de blocos completos ao acaso para o fator irrigação em parcelas, com o fator cultivar em subparcela e o fator tempo em dias após o transplante (dat em subsubparcela, com seis repetições. Os cinco níveis de irrigação foram tensões de 20; 40 e 60 kPa determinadas com o auxílio de tensiômetros, sistema Irrigas com tensão definida pelo próprio sensor e sem irrigação. As variáveis de crescimento avaliadas foram índice de área foliar, número de folhas, diâmetro do caule, altura de plantas e número de ramos plagiotrópicos. Aos 316 dat, os tratamentos irrigados tiveram o mesmo comportamento de crescimento, mas foram significativamente maiores em relação ao tratamento não irrigado. O sistema Irrigas mostrou ser uma opção para o manejo adequado da água com manutenção nula. As cultivares IAPAR-59 e Obatã têm comportamento de crescimento diferenciado, com todas as variáveis avaliadas favorecendo esta última.The experiment was carried out at "Água Limpa" Farm, University of Brasilia. The objective was to evaluate growth of IAPAR-59 and Obatã cultivars using five drip irrigation levels, during the crop of the first year and to study soil water management. It was used a randomized complete block design for the irrigation factor, with the cultivar factor as a split plot on irrigation and the factor time in days after transplanting (dat as a split plot on cultivar. The five irrigation levels were 20; 40 and 60 kPa, established using tensiometers; Irrigas system with soil water tension defined by its sensor; and no irrigation. Growth variables evaluated were leaf area index, leaf number

  8. Defining the effect of sweep tillage tool cutting edge geometry on tillage forces using 3D discrete element modelling

    Directory of Open Access Journals (Sweden)

    Mustafa Ucgul

    2015-09-01

    Full Text Available The energy required for tillage processes accounts for a significant proportion of total energy used in crop production. In many tillage processes decreasing the draft and upward vertical forces is often desired for reduced fuel use and improved penetration, respectively. Recent studies have proved that the discrete element modelling (DEM can effectively be used to model the soil–tool interaction. In his study, Fielke (1994 [1] examined the effect of the various tool cutting edge geometries, namely; cutting edge height, length of underside rub, angle of underside clearance, on draft and vertical forces. In this paper the experimental parameters of Fielke (1994 [1] were simulated using 3D discrete element modelling techniques. In the simulations a hysteretic spring contact model integrated with a linear cohesion model that considers the plastic deformation behaviour of the soil hence provides better vertical force prediction was employed. DEM parameters were determined by comparing the experimental and simulation results of angle of repose and penetration tests. The results of the study showed that the simulation results of the soil-various tool cutting edge geometries agreed well with the experimental results of Fielke (1994 [1]. The modelling was then used to simulate a further range of cutting edge geometries to better define the effect of sweep tool cutting edge geometry parameters on tillage forces. The extra simulations were able to show that by using a sharper cutting edge with zero vertical cutting edge height the draft and upward vertical force were further reduced indicating there is benefit from having a really sharp cutting edge. The extra simulations also confirmed that the interpolated trends for angle of underside clearance as suggested by Fielke (1994 [1] where correct with a linear reduction in draft and upward vertical force for angle of underside clearance between the ranges of −25 and −5°, and between −5 and 0°. The

  9. A review of the potential for competitive cereal cultivars as a tool in integrated weed management.

    Science.gov (United States)

    Andrew, I K S; Storkey, J; Sparkes, D L

    2015-06-01

    Competitive crop cultivars offer a potentially cheap option to include in integrated weed management strategies (IWM). Although cultivars with high competitive potential have been identified amongst cereal crops, competitiveness has not traditionally been considered a priority for breeding or farmer cultivar choice. The challenge of managing herbicide-resistant weed populations has, however, renewed interest in cultural weed control options, including competitive cultivars. We evaluated the current understanding of the traits that explain variability in competitive ability between cultivars, the relationship between suppression of weed neighbours and tolerance of their presence and the existence of trade-offs between competitive ability and yield in weed-free scenarios. A large number of relationships between competitive ability and plant traits have been reported in the literature, including plant height, speed of development, canopy architecture and partitioning of resources. There is uncertainty over the relationship between suppressive ability and tolerance, although tolerance is a less stable trait over seasons and locations. To realise the potential of competitive crop cultivars as a tool in IWM, a quick and simple-to-use protocol for assessing the competitive potential of new cultivars is required; it is likely that this will not be based on a single trait, but will need to capture the combined effect of multiple traits. A way needs to be found to make this information accessible to farmers, so that competitive cultivars can be better integrated into their weed control programmes.

  10. Tolerance and toxicity levels of boron in mung bean (vigna radiata (l.) wilczek) cultivars at early growth stages

    International Nuclear Information System (INIS)

    Hasnain, A.; Mahmood, S.; Akhtar, S.; Malik, S.A.; Bashir, N.

    2011-01-01

    Boron (B) toxicity has been recognized as a serious problem in arid and semi arid regions of the world. This study was aimed to determine critical levels of B by studying phenotypic variation for B-tolerance/ toxicity at the germination and seedling stage in three mung bean (Vigna radiata) cultivars; M-6, M-8 and 96009. Boron levels ranging from 0-20 ppm were applied using Boric acid. Germination, growth and photosynthetic attributes were significantly (p<0.001) influenced by varying B levels. However, the cultivars were significantly invariable for germination, seedling height and leaf number. B levels (5-10 ppm) appeared to be nutritionally critical whereas, 15-20 ppm induced B toxicity. The toxicity was expressed in terms of reduction in plant's growth as well as by visible symptoms which included chlorosis and necrosis of the foliage. The present study also demonstrated variation in B tolerance at the seedling stage in these cultivars. Among the tested cultivars, M-6 and M-8 exhibited better growth responses as compared with 96009. Fresh biomass and shoot: root ratio appeared to serve as selection criteria for B tolerance. The study further suggested screening of cultivars/ accessions on a large scale to explore more diversity of traits as well as the use of biochemical markers for mechanistic understanding of B tolerance. (author)

  11. Genetic Progress in Winter Wheat Cultivars released in Chile from 1920 to 2000 Progreso Genético en Cultivares de Trigo de Invierno Liberados en Chile desde 1920 a 2000

    Directory of Open Access Journals (Sweden)

    Iván Matus

    2012-09-01

    Full Text Available Wheat (Triticum aestivum L. is the major crop in terms of planted area and presents the largest distribution in the country covering a wide range of climatic regions. This study assesses the changes of various agronomic traits of winter wheat cultivars released in Chile between 1920 and 2000. A total of 117 winter accessions, representing 45 old and 72 modern cultivars were tested in a humid Mediterranean-type climate, with irrigation, in 2003. Old cultivars were those released before 1960 and modern ones were those released after 1960. Principal component (PC analysis using 10 agronomic traits clearly separate modern from old cultivars of winter wheat. Comparing modern cultivars with old ones, plant height have been reduced by 25.6%, but others traits have increased, like harvest index (21.1%, number of grains per ear (42.6%, sedimentation value (103%, and grain hardness (32.0%. The variation in plant height was negatively correlated with harvest index (r = -0.30, p El trigo (Triticum aestivum L. es el cultivo más importante en Chile en términos de superficie sembrada y áreas geográficas en las cuales se siembra, cubriendo una gran diversidad de condiciones climáticas. Este estudio evaluó los cambios de varias características agronómicas de variedades de trigo de invierno liberadas en el país entre 1920 y 2000. Un total de 117 genotipos de trigos de invierno, que representa 45 cultivares antiguos y 72 cultivares modernos, se evaluaron en un clima húmedo de tipo mediterráneo, en condiciones de riego, en el año 2003. Los cultivares antiguos corresponden a aquellos liberados antes del año 1960 y los modernos a los liberados después del año 1960. Mediante un análisis de componentes principales (CP usando 10 características agronómicas, permitió separar claramente los cultivares modernos de los antiguos. Al comparar los cultivares modernos con los antiguos se determinó que la altura de la planta se ha reducido un 25,6%, pero en

  12. INTRODUÇÃO DOS CULTIVARES DE UVA DE MESA "FANTASIA" E "RUIVA" NO BRASIL INTRODUCTION OF THE TABLE GRAPE CULTIVARS "FANTASY SEEDLESS" AND "CRIMSON SEEDLESS" INTO BRAZIL

    Directory of Open Access Journals (Sweden)

    Celso Valdevino Pommer

    1999-01-01

    by the USDA, Fresno, CA, USA, and introduced in Brazil by the authors. At the end of winter of 1991, cuttings of both cultivars were grafted on three different rootstocks at Campinas, SP, Brazil. Cuttings were also distributed for selected growers of various regions in the São Paulo State. Results of preliminary observations are presented here. "Fantasy Seedless" is an early to mid-season black seedless grape with cluster medium in size (350-550g, with a length of 13-20cm and a medium to loose compactness. The berries are naturally large, averaging 4-9g, 17-22mm in diameter, 20-30mm long, and are mostly oval. "Crimson Seedless" is a mid season red seedless grape with cluster medium in size (460-620g and length (18-30cm, and are slightly compact. The berries are naturally large, averaging 3.5-8.0g, 16-21mm in diameter, 18-30mm long, and are cylindrical to oval in shape. The duration of the cycle (pruning to harvest in Campinas, for both cultivars was about the same whether grafted on Kober 5BB, 106-8 Mgt or IAC 766, but vigor evaluated through trunk diameter and pruned weight, was higher for Crimson Seedless grafted on Kober 5BB. The performance of both cultivars in the São Paulo State showed that they can be commercially recommended. Both varieties were renamed in Portuguese as follows: Fantasia for "Fantasy Seedless" and Ruiva for "Crimson Seedless".

  13. BRS Milena: cultivar de soja de ciclo médio de alta produtividade para o Cerrado BRS Milena: a mid-cycle high productivity soybean cultivar for the Brazilian Savannah

    Directory of Open Access Journals (Sweden)

    PLÍNIO ITAMAR DE M. DE SOUZA

    2000-08-01

    Full Text Available A produtividade da soja no Cerrado torna a região competitiva nacional e internacionalmente. Entretanto, para atingir estabilidade produtiva e aprimorar o sistema de produção de grãos, torna-se necessária a obtenção de cultivares com resistência a doenças, como o cancro-da-haste, e com ciclo menor. Como resultado dos esforços da pesquisa, selecionou-se a cultivar BRS Milena. Os resultados, em todos os testes, mostram uma elevada produtividade e estabilidade em relação às cultivares usadas como testemunhas. O número de dias para maturação a classifica como uma cultivar de ciclo médio. Apresenta altura de plantas adequada à mecanização, e à ausência de acamamento nas condições em que tem sido testada. A `BRS Milena' apresenta resistência às principais doenças da soja, tais como o cancro-da-haste, a mancha-olho-de-rã, o oídio e a pústula bacteriana.The high productivity of soybeans in the Brazilian Savannah (Cerrado has turned the region into a major grain producer, at local and international competitive levels. To achieve yield stability and improve the production systems, however, the acquisition of disease-resistant and early maturity cultivars is necessary. `BRS Milena' was selected as a result of research efforts. Results over the tests have shown it is highly productive and stable, in relation to cultivars commonly grown in the region (controls. Number of days to maturity defines it as a mid-cycle cultivar, with suitable plant height for mechanical harvest and nonlodging under the environments of testing. In addition, `BRS Milena' is resistant to the main soybean diseases, like stem cancker, frogeye leaf spot, powdery mildew and bacterial pustule.

  14. Effect of growth conditions on post harvest rehydration ability of cut chrysanthemum flowers

    NARCIS (Netherlands)

    Meeteren, van U.; Gelder, van H.; Ieperen, van W.

    2005-01-01

    Different batches of cut chrysanthemum flowers showed substantial variability in restoring their fresh weight after a moderate water loss. Cutting height strongly affected the rehydration ability of cut flowers, and the hydraulic conductance of the stem and its restoration after air aspiration.

  15. Differences in arbuscular mycorrhizal fungi among three coffee cultivars in Puerto Rico

    Science.gov (United States)

    Ligia Lebrón; Jean D. Lodge; Paul. Bayman

    2012-01-01

    Mycorrhizal symbiosis is important for growth of coffee (Coffea arabica), but differences among coffee cultivars in response to mycorrhizal interactions have not been studied. We compared arbuscular mycorrhizal (AM) extraradical hyphae in the soil and diversity of AM fungi among three coffee cultivars, Caturra, Pacas, and Borbon, at three farms in...

  16. Evolution of strain localization in variable-width three-dimensional unsaturated laboratory-scale cut slopes

    Science.gov (United States)

    Morse, Michael S.; Lu, Ning; Wayllace, Alexandra; Godt, Jonathan W.

    2017-01-01

    To experimentally validate a recently developed theory for predicting the stability of cut slopes under unsaturated conditions, the authors measured increasing strain localization in unsaturated slope cuts prior to abrupt failure. Cut slope width and moisture content were controlled and varied in a laboratory, and a sliding door that extended the height of the free face of the slope was lowered until the cut slope failed. A particle image velocimetry tool was used to quantify soil displacement in the x-y">x-y (horizontal) and x-z">x-z (vertical) planes, and strain was calculated from the displacement. Areas of maximum strain localization prior to failure were shown to coincide with the location of the eventual failure plane. Experimental failure heights agreed with the recently developed stability theory for unsaturated cut slopes (within 14.3% relative error) for a range of saturation and cut slope widths. A theoretical threshold for sidewall influence on cut slope failures was also proposed to quantify the relationship between normalized sidewall width and critical height. The proposed relationship was consistent with the cut slope experiment results, and is intended for consideration in future geotechnical experiment design. The experimental data of evolution of strain localization presented herein provide a physical basis from which future numerical models of strain localization can be validated.

  17. Similaridade genética entre cultivares de cebola de diferentes tipos e origens, baseada em marcadores AFLP Genetic similarity among onion cultivars of different types and origins, based on AFLP markers

    Directory of Open Access Journals (Sweden)

    CAF Santos

    2011-03-01

    AFLP bands, according to UPGMA phenogram, built with the Jaccard's similarity coefficient matrix. The phenogram co-phenetic value was estimated in 0.91 showing a good adequacy of the data. In the phenogram were observed two main onion groups at the cut point of 0.55 of similarity: 1 group composed of predominantly Brazilian cultivars, with some inclusion of foreigners; and 2 group with three foreign cultivars (Mercedes, Perfect and TEG 502 PRR. Rijnsburger Jumbo and IPA 8 presented the largest similarity (85%, while Madrugada presented the greatest dissimilarity to the other cultivars. The cultivars developed by IPA were split in sub-groups within the group 1: IPA 8, IPA 10 and IPA 11; IPA 12, IPA 7, IPA 2 and IPA 6; IPA 3, IPA 4 and IPA 9, suggesting that genetic variability could be explored by crosses among cultivars from different IPA subgroups. Bola Precoce and BRS Cascata presented the greatest similarity among the Brazilian cultivars. A similarity greater than 39% was observed, suggesting a high genetic variability of the analyzed onion collection. Introduction of new cultivars should take in consideration other origins than USA, in order to increase the genetic variability of onion germplasm in the Northeast Brazil.

  18. Variation in broccoli cultivar phytochemical content under organic and conventional management systems: implications in breeding for nutrition.

    Science.gov (United States)

    Renaud, Erica N C; Lammerts van Bueren, Edith T; Myers, James R; Paulo, Maria João; van Eeuwijk, Fred A; Zhu, Ning; Juvik, John A

    2014-01-01

    Organic agriculture requires cultivars that can adapt to organic crop management systems without the use of synthetic pesticides as well as genotypes with improved nutritional value. The aim of this study encompassing 16 experiments was to compare 23 broccoli cultivars for the content of phytochemicals associated with health promotion grown under organic and conventional management in spring and fall plantings in two broccoli growing regions in the US (Oregon and Maine). The phytochemicals quantified included: glucosinolates (glucoraphanin, glucobrassicin, neoglucobrassin), tocopherols (δ-, γ-, α-tocopherol) and carotenoids (lutein, zeaxanthin, β-carotene). For glucoraphanin (17.5%) and lutein (13%), genotype was the major source of total variation; for glucobrassicin, region (36%) and the interaction of location and season (27.5%); and for neoglucobrassicin, both genotype (36.8%) and its interactions (34.4%) with season were important. For δ- and γ-tocopherols, season played the largest role in the total variation followed by location and genotype; for total carotenoids, genotype (8.41-13.03%) was the largest source of variation and its interactions with location and season. Overall, phytochemicals were not significantly influenced by management system. We observed that the cultivars with the highest concentrations of glucoraphanin had the lowest for glucobrassicin and neoglucobrassicin. The genotypes with high concentrations of glucobrassicin and neoglucobrassicin were the same cultivars and were early maturing F1 hybrids. Cultivars highest in tocopherols and carotenoids were open pollinated or early maturing F1 hybrids. We identified distinct locations and seasons where phytochemical performance was higher for each compound. Correlations among horticulture traits and phytochemicals demonstrated that glucoraphanin was negatively correlated with the carotenoids and the carotenoids were correlated with one another. Little or no association between

  19. Effect of salt stress on growth, Na+ accumulation and proline metabolism in potato (Solanum tuberosum cultivars.

    Directory of Open Access Journals (Sweden)

    Rinse Jaarsma

    Full Text Available Potato (Solanum tuberosum is a major crop world-wide and the productivity of currently used cultivars is strongly reduced at high soil salt levels. We compared the response of six potato cultivars to increased root NaCl concentrations. Cuttings were grown hydroponically and treated with 0 mM, 60 mM and 180 mM NaCl for one week. Growth reduction on salt was strongest for the cultivars Mozart and Mona Lisa with a severe senescence response at 180 mM NaCl and Mozart barely survived the treatment. The cultivars Desiree and Russett Burbank were more tolerant showing no senescence after salt treatment. A clear difference in Na(+ homeostasis was observed between sensitive and tolerant cultivars. The salt sensitive cultivar Mozart combined low Na(+ levels in root and stem with the highest leaf Na(+ concentration of all cultivars, resulting in a high Na(+ shoot distribution index (SDI for Mozart as compared to Desiree. Overall, a positive correlation between salt tolerance and stem Na(+ accumulation was found and the SDI for Na(+ points to a role of stem Na(+ accumulation in tolerance. In stem tissue, Mozart accumulated more H2O2 and less proline compared to the tolerant cultivars. Analysis of the expression of proline biosynthesis genes in Mozart and Desiree showed a clear reduction in proline dehydrogenase (PDH expression in both cultivars and an increase in pyrroline-5-carboxylate synthetase 1 (P5CS1 gene expression in Desiree, but not in Mozart. Taken together, current day commercial cultivars show promising differences in salt tolerance and the results suggest that mechanisms of tolerance reside in the capacity of Na(+ accumulation in stem tissue, resulting in reduced Na(+ transport to the leaves.

  20. Effect of Salt Stress on Growth, Na+ Accumulation and Proline Metabolism in Potato (Solanum tuberosum) Cultivars

    Science.gov (United States)

    Jaarsma, Rinse; de Vries, Rozemarijn S. M.; de Boer, Albertus H.

    2013-01-01

    Potato (Solanum tuberosum) is a major crop world-wide and the productivity of currently used cultivars is strongly reduced at high soil salt levels. We compared the response of six potato cultivars to increased root NaCl concentrations. Cuttings were grown hydroponically and treated with 0 mM, 60 mM and 180 mM NaCl for one week. Growth reduction on salt was strongest for the cultivars Mozart and Mona Lisa with a severe senescence response at 180 mM NaCl and Mozart barely survived the treatment. The cultivars Desiree and Russett Burbank were more tolerant showing no senescence after salt treatment. A clear difference in Na+ homeostasis was observed between sensitive and tolerant cultivars. The salt sensitive cultivar Mozart combined low Na+ levels in root and stem with the highest leaf Na+ concentration of all cultivars, resulting in a high Na+ shoot distribution index (SDI) for Mozart as compared to Desiree. Overall, a positive correlation between salt tolerance and stem Na+ accumulation was found and the SDI for Na+ points to a role of stem Na+ accumulation in tolerance. In stem tissue, Mozart accumulated more H2O2 and less proline compared to the tolerant cultivars. Analysis of the expression of proline biosynthesis genes in Mozart and Desiree showed a clear reduction in proline dehydrogenase (PDH) expression in both cultivars and an increase in pyrroline-5-carboxylate synthetase 1 (P5CS1) gene expression in Desiree, but not in Mozart. Taken together, current day commercial cultivars show promising differences in salt tolerance and the results suggest that mechanisms of tolerance reside in the capacity of Na+ accumulation in stem tissue, resulting in reduced Na+ transport to the leaves. PMID:23533673

  1. Use of 1-methylcyclopropene for the control of Botrytis cinerea on cut flowers

    Directory of Open Access Journals (Sweden)

    L. Seglie

    2009-09-01

    Full Text Available Cut flowers are marketed for their ornamental characteristics making post-harvest flower life an important determinant of crop value. Botrytis cinerea is one of the most significant post-harvest fungal pathogens causing losses in ornamental plants. Disease caused by this fungus seems to be enhanced by the presence of a ethylene hormone, that both the plant and the fungus are known to synthesize. The aim of the experiment was to determine if 1-methylcyclopropene (1-MCP, an ethylene antagonist, could be used to reduce B. cinerea damage to cut flowers. Six cultivars of four ornamental species: Dianthus caryophyllus ‘Idra di Muraglia’, Rosa × hybrida ‘White Dew’ and ‘Ritz’, Ranunculus asiaticus ‘Saigon’ and ‘Green’, and Cyclamen persicum line ‘Halios Bianco Puro Compatto’ were given three concentrations of 1-MCP (0.38 μl L-1, 1.14 μL L-1, and 3.62 μL L-1 for 24 hours. Subsequently, 10 petals per cultivar were treated with a B. cinerea conidial suspension (5×103 conidia cm-2 and stored in air-tight vases. To evaluate B. cinerea development an arbitrary damage scale (1–7 was used. A high concentration of 1-MCP significantly reduced B. cinerea damage on D. caryophyllus ‘Idra di Muraglia’ and C. persicum ‘Halios White Pure Compact’ petals. In carnation, 1-MCP treatment slowed B. cinerea infection; its threshold level was reached three days after that of the control. In cyclamen, treated petals and control petals remained aesthetically good until day 53 and day 28 respectively. At low concentrations, 1-MCP slowed grey mould on R. × hybrida ‘Ritz’ for up to three days beyond the control. On the two buttercup cultivars ‘Green’ and ‘Saigon’, 1-MCP treatments were not effective. In conclusion, 1-MCP limited pathogen development; its effect depended on the species and the 1-MCP concentration. Further investigations will be performed to improve methods to reduce B. cinerea development on the petals of cut

  2. Composição de aminoácidos de cultivares de feijão e aplicações para o melhoramento genético Amino acid composition in common bean cultivars and applications for genetic breeding

    Directory of Open Access Journals (Sweden)

    Nerinéia Dalfollo Ribeiro

    2007-10-01

    Full Text Available O objetivo deste trabalho foi determinar a composição de aminoácidos em grãos de cultivares de feijão e a presença de interação cultivares x locais, nos teores de aminoácidos, e identificar cultivares para uso direto na alimentação e derivações em programas de melhoramento. Os aminoácidos foram determinados por cromatografia líquida de alta performance (HPLC, em grãos de 19 cultivares de feijão cultivadas em dois locais. Os dados médios obtidos para cada cultivar, em duplicata, foram comparados entre si com a utilização do teste t, a 5% de probabilidade para cada local. Os grãos das cultivares analisadas apresentaram teores de aminoácidos essenciais e não-essenciais, adequados às necessidades diárias de um indivíduo adulto, o que indica alta qualidade da proteína do feijão. As cultivares de feijão apresentam, em ordem decrescente, os aminoácidos essenciais: leucina, lisina, fenilalanina, valina, isoleucina, treonina, histidina e metionina; e os aminoácidos não-essenciais: ácido glutâmico, ácido aspártico, arginina, serina, alanina, glicina, tirosina, prolina e cisteína. Os teores de leucina, isoleucina, histidina, valina, treonina, glicina e alanina foram afetados pela interação cultivares x locais. A cultivar Iraí apresenta composição de aminoácidos adequada e é indicada para uso em dietas e derivações em programas de melhoramento.The objective of this work was to determine the amino acid composition of seeds of common bean cultivars and to examine the presence of cultivar x location interactions in amino acid contents, and to identify common bean cultivars for direct consumption or use in breeding programs. The amino acid contents were determinated through high performance liquid chromatography (HPLC, in 19 common bean cultivars obtained in two localities. The mean data sets of each cultivar, in duplication, were compared by the F test at 5% probability for each location. Grains of the common bean

  3. Grain legume cultivars derived from induced mutations, and mutations affecting nodulation

    International Nuclear Information System (INIS)

    Bhatia, C.R.; Maluszynski, M.; Nichterlein, K.; Zanten, L. van

    2001-01-01

    Two hundred and sixty-five grain legume cultivars developed using induced mutations have been released in 32 countries. A maximum number of cultivars have been released in soybean (58), followed by common bean (50), groundnut (44), pea (32) and mungbean (14). Gamma or x-ray exposures of seeds led to the direct development of 111 cultivars, while neutron and chemical mutagen treatments resulted in 8 and 36 cultivars respectively. One hundred and three cultivars have been developed using mutants in cross breeding. Attempts have been made to estimate the successful dose range for gamma and x-rays, defined as the dose range, which led to the development, registration and release of a maximum number of mutant cultivars. Exposures to seeds ranging between 100-200 Gy in all grain legumes, except faba bean, resulted in 49 out of 111 cultivars being developed as direct mutants. Successful doses reported for faba bean are lower than 100 Gy. Modified crop plant characters are listed. Besides the development of new cultivars, a large number of induced mutants that show altered nodulation pattern have been isolated in grain legumes. Such mutants have made a significant contribution in basic studies on host-symbiont interactions and towards cloning of plant genes related to symbiosis and nitrogen fixation. Their exploitation in breeding programs for enhancing nitrogen fixation is just beginning. Available information on nodulation mutants in grain legume crops is summarised. Mainly, four types of nodulation mutants have been isolated. They show either: no nodulation (nod -), few nodules (nod +/-), ineffective nodulation (Fix-), hypernodulation (nod ++) or hypernodulation even in the presence of otherwise inhibitory nitrate levels (nts). Hypernodulating and nts mutants are of great interest. A soybean cultivar incorporating nts trait has been released in Australia. (author)

  4. (AMMI) and genotype by environment interaction

    African Journals Online (AJOL)

    SARAH

    2014-04-30

    Apr 30, 2014 ... Background and justification: Lack of stable high yielding cultivars is one ... of advanced finger millet genotypes evaluated in multiple environments, and (ii) identify stable high yielding .... for interaction principal component axis (IPCA) n, γgn ..... Table 2: Analysis of variance for grain yield using AMMI model.

  5. Danish apple cultivars

    DEFF Research Database (Denmark)

    Larsen, Bjarne; Pedersen, Carsten; Ørgaard, Marian

    2017-01-01

    Abstract We made a genetic analysis of about 500 apple cultivars, which either originate from Denmark or have been of greater importance in Denmark. To study the diversity and parentage among the cultivars, 15 SSR markers were used. A new PCR-based protocol for identification of S-alleles was dev......Abstract We made a genetic analysis of about 500 apple cultivars, which either originate from Denmark or have been of greater importance in Denmark. To study the diversity and parentage among the cultivars, 15 SSR markers were used. A new PCR-based protocol for identification of S...

  6. Sensibilidade de cultivares de soja (Glycine max aos herbicidas diclosulam e flumetsulam Soybean (Glycine max cultivars sensibility to the herbicides diclosulam and flumetsulam

    Directory of Open Access Journals (Sweden)

    Célio R. F. Leite

    2000-01-01

    -48', 'Ocepar-14', 'BR-16', 'Embrapa-4', 'Ocepar-13', 'BR-36', 'FT 10- Princesa', 'FT-2000', 'FT-Abyara', 'BR-37' and 'RS 7-Jacuí'. Diclosulam was used in the rates of 35 g/ha (normal rate and 70 g/ha (double rate and flumetsulam in the rates of 120 g and 240 g/ha (normal and double rate respectively. It was also used a mix of diclosulam and flumetsulam (20 + 100 g/ha and imazaquin at 150 g/ha. At the normal rates of both herbicides it was not poss to find any difference in suscetibily of the cultivars. At double rates of diclosulam the yields of 'FT-Guaira', 'Embrapa-4'and 'BR-37' were reduced in 20,9%, 11,8% and 11,0%, respectively, in relation to the check. Flumetsulam at 240 g/ha and its mix with diclosulam also reduced the yields of these cultivars, plus "Ocepar-14'. The major of the cultivars showed a reduced stand at the double rates of the both herbicides, but without significance. Only the stand of 'Embrapa- 48' was not affected, contrary to 'RS 7-Jacuí'. The plant height was reduced by flumetsulam at 240 g/ha. In all cultivars the nodule dry biomass was reduced in double rates, and in some of them the weight per unit of nodule. The dry biomass of aerial port and roots werw nor reduced.

  7. Alterations in growth, oxidative damage, and metal uptake of five aromatic rice cultivars under lead toxicity.

    Science.gov (United States)

    Ashraf, Umair; Hussain, Saddam; Anjum, Shakeel Ahmad; Abbas, Farhat; Tanveer, Mohsin; Noor, Mehmood Ali; Tang, Xiangru

    2017-06-01

    Lead (Pb) affects plant growth and its related physio-biochemical functions negatively. The present study investigated the responses of five different fragrant rice cultivars viz., Meixiangzhan (MXZ-2), Xiangyaxiangzhan (XYXZ), Guixiangzhan (GXZ), Basmati-385 (B-385), and Nongxiang-18 (NX-18) to four different Pb concentrations viz., 0, 400, 800 and 1200 μM. Results depicted that Pb toxicity significantly (P rice plants; nonetheless, a significant variation was found in the sensitivity of rice cultivars to Pb toxicity. Soluble sugars increased significantly only at 1200 μM in GXZ and 800 μM in B-385, whilst the maximum reductions in protein contents were observed at 1200 μM Pb for all rice cultivars. Proline contents were reduced for XYXZ and NX-18 at Pb1200 μM. Activities of superoxide dismutase (SOD), peroxidase (POD), catalase (CAT) and ascorbate peroxidase (APX) as well as reduced glutathione (GSH) and oxidized glutathione (GSSG) showed differential behavior among Pb treatments and rice cultivars. Among rice cultivars, GXZ showed better antioxidative defense system under Pb toxicity compared with all other cultivars. For all rice cultivars, the trend for Pb accumulation was recorded as: roots > stems > leaves. Furthermore, significant but negative correlations among Pb uptake and plant height (r = -0.79), tillers per plant (r = -0.91) and plant dry biomass (r = -0.81) were recorded for all rice cultivars whereas the values of translocation factor (TF) from stems to leaves were higher than roots to stems. In sum, Pb reduced the early growth and caused physio-biochemical changes in all rice cultivars, nonetheless, GXZ proved better able to tolerate Pb stress than all other rice cultivars under study. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  8. Metabolite profiling of leek (Allium porrum L) cultivars by (1) H NMR and HPLC-MS.

    Science.gov (United States)

    Soininen, Tuula H; Jukarainen, Niko; Soininen, Pasi; Auriola, Seppo O K; Julkunen-Tiitto, Riitta; Oleszek, Wieslaw; Stochmal, Anna; Karjalainen, Reijo O; Vepsäläinen, Jouko J

    2014-01-01

    Leek (Allium ampeloprasum var. porrum) is consumed as a vegetable throughout the world. However, little is known about the metabolites of leek cultivars, especially those with potentially important beneficial properties for human health. We provide new information for the overall metabolite composition of several leek cultivars grown in Europe by using HPLC-MS and (1) H NMR. The use of a novel CTLS/NMR (constrained total-line-shape nuclear magnetic resonance) approach was found to be capable of reliable quantification, even with overlapping metabolite signals in the (1) H NMR of plant metabolites. Additionally, a new application for leek flavonoids was optimised for HPLC-MS. The total concentration of carbohydrates (glucose, fructose, kestose/nystose and sucrose) and nine amino acids varied by fourfold in leek juice from different cultivars, while the total concentrations of four organic acids were similar in all cultivars. All the quantified flavonols were kaempferol derivatives or quercetin derivatives and threefold differences in flavonol concentrations were detected between cultivars. In this study, various phytochemical profiles were determined for several leek cultivars by (1) H NMR spectroscopy with CTLS combined with HPLC-MS. The wide variation in bioactive compounds among commercial leek cultivars offers promising opportunities for breeders to raise the levels of important biochemical compounds in leek breeding lines, and also provides some objective measure for quality assurance for the leek industry. Copyright © 2014 John Wiley & Sons, Ltd.

  9. Abdominal Obesity in German Adolescents Defined by Waist-to-Height Ratio and Its Association to Elevated Blood Pressure: The KiGGS Study

    Directory of Open Access Journals (Sweden)

    Katrin Kromeyer-Hauschild

    2013-04-01

    Full Text Available Objective: The aim of this study was to compare the fixed 0.5 cut-off and the age- and sex-specific 90th percentile (P90 for waist-to-height ratio (WHtR in German adolescents with respect to the prevalence of abdominal obesity and to compare the screening ability of WHtR and BMI to identify hypertensive blood pressure (BP values. Methods: Between 2003 and 2006, the German Health Interview and Examination Survey for Children and Adolescents (KiGGS was carried out including 3,492 boys and 3,321 girls aged 11-17 years. Abdominal obesity was assessed by two WHtR cut-points (P90; 0.5. Hypertensive BP was defined as BP exceeding age-, sex- and height-specific 95th percentiles or the adult threshold for hypertension (140/90 mm Hg. Results: Agreement between the WHtR cut-offs was very good (Kappa 0.89 for boys; 0.81 for girls, and the prevalence of abdominal obesity was slightly higher using P90 (boys 12.0%; girls 11.3% compared to 0.5 (boys 10.7%; girls 8.0%. WHtR and BMI-for-age had equivalent ability to discriminate hypertensive BP (ROC-AUC Conclusion: The fixed 0.5 WHtR cut-off can be used in German adolescents to characterize abdominal obesity. However, WHtR is not suitable as a screening tool for hypertensive BP in adolescents.

  10. Population Dynamics of Macrosiphum rosae (L. on Different Cultivars of Rose (Rosahybrida, Rosaceae and Biodiversity of its Predators in Mashhad

    Directory of Open Access Journals (Sweden)

    M. Keykhosravi

    2016-06-01

    Full Text Available Introduction: Rose (Rosa hybrida (L., Rosaceae has been grown on earth for millions of years and has been used for beauty and decoration of gardens, extraction of perfume and in medicine. But main use of roses is in cut flower industry and landscaping. Roses are attractive for insects, especially aphids (2, 3, 5, 6, 7, 11, 17, 27, 28, 35, 38. Among them, the predominant aphid that feeds on the cultivated roses in outdoors is the rose aphid, Macrosiphum rosae (13, 27, 28, 29. The rose aphid has a wide distribution throughout Iran and the world (27, 28, 29. Rose aphids generally initiate feeding on roses in early spring as the new flush of growth emerges. Like other aphid species, rose aphids tend to congregate or cluster in large numbers feeding on the terminal growth including leaves and stems, and developing flower buds, and on leaf undersides. Their feeding causes deformity flower buds and leaves which may result in flower buds aborting or falling off prematurely before opening. In addition, aphids secrete honeydew, which attracts ants, wasps, hornets and serves as a growing medium for certain black sooty mold fungi. Rose aphids are attacked by anvarray of natural enemies including parasitoids and predators such as ladybird beetles, green lacewings, syrphids and several other groups of arthropods. These may provide natural regulation depending on the number of rose aphids present and other biotic and abiotic factors. Although many herbivorous arthropods may attack roses but many roses cultivar can resist against these pests (23, 26, 28, 40. An important factor influencing this success is careful selection of varieties, which vary significantly in susceptibility to pests and disease problems (9, 13, 19, 21, 23, 30, 40. Of course, other factors such as agricultural practices and the presence and activities of natural enemies of pests are also important. This study aimed to determine any resistance against rose aphid in different rose cultivars

  11. Nitrogen fixation in different chickpea cultivars as affected by iron application N-15 Technique

    Energy Technology Data Exchange (ETDEWEB)

    Gadalla, A M; Soliman, S M; Abdelmonem, M [Soil and Water Dept., Atomic Energy Authority, Cairo, (Egypt)

    1995-10-01

    With development of new cultivars of winter chickpea, it became important to evaluate the potential of these cultivars to fix nitrogen from air, and the effect of different agronomic factors on this important process. Greenhouse experiment was conducted to screen five cultivars of chickpea for N 2- fixation ability as affected by iron application. These cultivars were Giza 1,2,531 and 88 as compared with L 3 which was developed from the genotype NEC 1055 by irradiation. N 2- fixation was estimated using N-15 technique. Plant materials were collected after 55 days from planing. Plants samples were analysed for total N-15 atom excess. Results show that Giza 88 gave the highest dry matter as well as nitrogen fixation. Nitrogen derived from air (NDFA) ranged from 27 to 50% due to variety difference and iron treatment. 1 fig., 3 tabs.

  12. Nitrogen fixation in different chickpea cultivars as affected by iron application N-15 Technique

    International Nuclear Information System (INIS)

    Gadalla, A.M.; Soliman, S.M.; Abdelmonem, M.

    1995-01-01

    With development of new cultivars of winter chickpea, it became important to evaluate the potential of these cultivars to fix nitrogen from air, and the effect of different agronomic factors on this important process. Greenhouse experiment was conducted to screen five cultivars of chickpea for N 2- fixation ability as affected by iron application. These cultivars were Giza 1,2,531 and 88 as compared with L 3 which was developed from the genotype NEC 1055 by irradiation. N 2- fixation was estimated using N-15 technique. Plant materials were collected after 55 days from planing. Plants samples were analysed for total N-15 atom excess. Results show that Giza 88 gave the highest dry matter as well as nitrogen fixation. Nitrogen derived from air (NDFA) ranged from 27 to 50% due to variety difference and iron treatment. 1 fig., 3 tabs

  13. Automatic NC-Data generation method for 5-axis cutting of turbine-blades by finding Safe heel-angles and adaptive path-intervals

    International Nuclear Information System (INIS)

    Piao, Cheng Dao; Lee, Cheol Soo; Cho, Kyu Zong; Park, Gwang Ryeol

    2004-01-01

    In this paper, an efficient method for generating 5-axis cutting data for a turbine blade is presented. The interference elimination of 5-axis cutting currently is very complicated, and it takes up a lot of time. The proposed method can generate an interference-free tool path, within an allowance range. Generating the cutting data just point to the cutting process and using it to obtain NC data by calculating the feed rate, allows us to maintain the proper feed rate of the 5-axis machine. This paper includes the algorithms for: (1) CL data generation by detecting an interference-free heel angle, (2) finding the optimal tool path interval considering the cusp-height, (3) finding the adaptive feed rate values for each cutter path, and (4) the inverse kinematics depending on the structure of the 5-axis machine, for generating the NC data

  14. BRS Libra: cultivar de pessegueiro lançada pela Embrapa, em 2009 ‘BRS LIBRA’: peach cultivar released by Embrapa, in 2009

    Directory of Open Access Journals (Sweden)

    Maria do Carmo Bassols Raseira

    2010-12-01

    Full Text Available O programa de melhoramento genético da Embrapa Clima Temperado enfatiza a criação de cultivares de maturação precoce, produtoras de frutas de polpa não fundente. Isto é devido ao interesse dos produtores e da indústria conserveira, uma vez que tais cultivares têm mais baixo custo de produção e muito boa oportunidade de mercado. A cv. BRS Libra atende a esta demanda e já foi testada por produtores da área próxima a Pelotas, por vários ciclos, contando com a cooperação do serviço de Extensão do Rio Grande do Sul. Mais recentemente, os testes foram estendidos a outras regiões com a parceria de instituições de pesquisa públicas e privadas. A cv. BRS Libra tem baixa necessidade em frio, com floração precoce e maturação iniciando geralmente, no início de outubro e ocasionalmente, ao final de setembro, no município de Pelotas. A sua exigência em frio não foi determinada precisamente, mas por comparação com outras cultivares estima-se que seja entre 100 e 200 horas.The Embrapa peach breeding program emphasizes the development of early ripening cultivars which produce non-melting flesh peaches. This is due to the interest of growers and canning industry on these cultivars because of the lower production costs plus the market oportunities. The BRS Libra cv. meet this objective and has been tested by growers around Pelotas'area, for several years with the collaboration of the extension service of Rio Grande do Sul State, and more recently in other areas, thanks to the cooperation of other public and private research institutions. It has low chilling requirement, early blooming and the harvest generally starts by beginning of October and exceptionally end of September, in Pelotas, RS. The chilling requirement was mot precisely determined but by comparison with other cultivars, it is estimated between 100 and 200 hours.

  15. Interacting effects of grass height and herbivores on the establishment of an encroaching savanna shrub

    NARCIS (Netherlands)

    Hagenah, N.; Munkert, H.; Gerhardt, K.; Olff, H.

    2009-01-01

    Shrub encroachment is a widely observed problem in Southern African savannas. Although the effects of herbivory and grass height on woody species recruitment have been studied individually, little information exists about how these factors interact. In this study seeds and seedlings of the

  16. Relationships between some Thai cultivars of pineapple (Ananas comosus revealed by RAPD analysis

    Directory of Open Access Journals (Sweden)

    Siam Popluechai

    2007-11-01

    Full Text Available RAPD analysis of nine Thai pineapple cultivars, including 'Phulae', 'Sawee', 'Tradsithong', 'Phuket', 'Pattavia', 'Intrachitdang', 'Intrachitkhow', 'Petburi No.1', and 'Nanglae', showed that, of 40 arbitrary 10- mer primers, 17 primers gave 206 DNA fragments ranging from 510 to 4,700 bp. One hundred and forty-five (70.4% of the amplified fragments were polymorphic. RAPD analysis using NTSYS-pc Version 2.01e also showed that the similarity coefficients among the cultivars were 0.643-0. 963. The dendrogram indicated that the cultivars were clustered into 3 groups, consistent with the morphological data. The first group, consisting of 'Phuket', 'Phulae', 'Tradsithong', 'Sawee', and 'Petburi No.1', had morphological characteristics of the Queen group, while those of the second ('Intrachitdang' and 'Intrachitkow' and the third ('Nanglae' and 'Pattavia' groups could be determined morphologically to be members of the Spanish and Cayenne groups, respectively. 'Intrachitdang' and 'Intrachitkow' have similarity coefficient of 0.963, while that of 'Phulae' and 'Phuket' is 0.950. These pairs of cultivars are probably the same cultivars. The morphological differences between them are probably caused by mutations, differences in environment and agricultural practices, or combinations of these factors.

  17. Effect of 'Gutingen V' as an intensive training system on agromorphological characters of some apple cultivars in Karaj region of Iran

    Directory of Open Access Journals (Sweden)

    Dadashpour Ahmad

    2010-01-01

    Full Text Available V-shape systems represent an efficient and popular option to increase yields and fruit quality in fruit trees. Hence, this paper attempts to compare some vegetative and yield characteristics of five apple cultivars grown at horticultural research station in Karaj, Iran. The selected apple cultivars were included: 'Golab-kohans' (Iranian cultivar, 'Fuji', 'Gala', 'Starking' and 'Delbar estival' (commercial foreign cultivars that were grafted on M.9 rootstock which were trained in a V system. All of these trees were planted in winter 2005. The time of irrigation started from the second experimental year after planting and the method of irrigation was drip irrigation system. Results showed that the 'Golab-kohans' had the most tree height (278.63 cm, trunk cross sectional area (7.308 cm2 and mean shoot length (100.58 cm. Also 'Delbar estival' had the most yield (0.98 kg, yield efficiency (0.550 kg/cm2. Consistently, Results revealed that among the investigated cultivars, 'Delbar estival' can be introduced as a prone and productive cultivar for V system in Karaj's climatic conditions.

  18. Tree Diamter Effects on Cost and Productivity of Cut-to-Length Systems

    Science.gov (United States)

    Matthew A. Holtzscher; Bobby L. Lanford

    1997-01-01

    Currently, there is a lack of economic information concerning cut-to-length harvesting systems. This study examined and measured the different costs of operating cut-to-length logging equipment over a range of average stand diameters at breast height. Three different cut-to-length logging systems were examined in this study. Systems included: 1) felier-buncher/manual/...

  19. Interaction between sapwood and foliage area in alpine ash (Eucalyptus delegatensis) trees of different heights.

    Science.gov (United States)

    Mokany, Karel; McMurtrie, Ross E; Atwell, Brian J; Keith, Heather

    2003-10-01

    In native stands of Eucalyptus delegatensis R. T. Baker, sapwood area (As) to foliage area (Af) ratios (As:Af) decreased as tree height increased, contradicting the common interpretation of the Pipe Model Theory as well as the generally observed trend of increasing As:Af ratios with tree height. To clarify this relationship, we estimated sapwood hydraulic conductivity theoretically based on measurements of sapwood vessel diameters and Poiseuille's law for fluid flow through pipes. Despite the observed decrease in As:Af ratios with tree height, leaf specific conductivity increased with total tree height, largely as a result of an increase in the specific conductivity of sapwood. This observation supports the proposition that the stem's ability to supply foliage with water must increase as trees grow taller, to compensate for the increased hydraulic path length. The results presented here highlight the importance of measuring sapwood hydraulic conductivity in analyses of sapwood-foliage interactions, and suggest that measurements of sapwood hydraulic conductivity may help to resolve conflicting observations of how As:Af ratios change as trees grow taller.

  20. Interactive effect of genetic susceptibility with height, body mass index, and hormone replacement therapy on the risk of breast cancer

    Directory of Open Access Journals (Sweden)

    Harlid Sophia

    2012-06-01

    Full Text Available Abstract Background Breast cancer today has many established risk factors, both genetic and environmental, but these risk factors by themselves explain only part of the total cancer incidence. We have investigated potential interactions between certain known genetic and phenotypic risk factors, specifically nine single nucleotide polymorphisms (SNPs and height, body mass index (BMI and hormone replacement therapy (HRT. Methods We analyzed samples from three different study populations: two prospectively followed Swedish cohorts and one Icelandic case–control study. Totally 2884 invasive breast cancer cases and 4508 controls were analysed in the study. Genotypes were determined using Mass spectrometry-Maldi-TOF and phenotypic variables were derived from measurements and/or questionnaires. Odds Ratios and 95% confidence intervals were calculated using unconditional logistic regression with the inclusion of an interaction term in the logistic regression model. Results One SNP (rs851987 in ESR1 tended to interact with height, with an increasingly protective effect of the major allele in taller women (p = 0.007 and rs13281615 (on 8q24 tended to confer risk only in non users of HRT (p-for interaction = 0.03. There were no significant interactions after correction for multiple testing. Conclusions We conclude that much larger sample sets would be necessary to demonstrate interactions between low-risk genetic polymorphisms and the phenotypic variables height, BMI and HRT on the risk for breast cancer. However the present hypothesis-generating study has identified tendencies that would be of interest to evaluate for gene-environment interactions in independent materials.

  1. Rheological properties of biscuit dough from different cultivars, and relationship to baking characteristics

    DEFF Research Database (Denmark)

    Pedersen, L.; Kaack, K.; Bergsøe, M.N.

    2004-01-01

    differences in structural properties with genetic control. Multivariate regression of flour physiochemical, dough theological, and biscuit baking characteristics showed that a decrease in biscuit length was correlated under several theological parameters, including phase angle delta, Farinograph and creep......Rheological properties of semi-sweet biscuit doughs from eight wheat cultivars were studied, and related to the dimensional changes of biscuits after cutting and baking. The tested cultivars were selected in order to represent a wide diversity in biscuit baking performance, and were grown with low...... recovery parameters. Sedimentation value was the only physiochernical flour characteristic with considerable influence on the model. Validation of the partial least squares-model including all samples from the 3 years gave only a weak correlation (r = 0.58), whereas when each single year was evaluated...

  2. Rooting of hybrid clones of Populus tremula L. x P. tremuloides Michx. by stem cuttings derived from micropropagated plants

    Energy Technology Data Exchange (ETDEWEB)

    Qibin Yu [Univ. of Helsinki (Finland). Dept. of Plant Biology; Maentylae, N. [Univ. of Turku (Finland). Dept. of Biology, Plant Physiology and Molecular Biology; Salonen, M. [Finnish Forest Research Inst., Laeyliaeinen (Finland). Haapastensyrjae Breeding Station

    2001-07-01

    Propagation costs could be cut by replacing part of the micropropagation process with steps involving more traditional techniques. This study explored possibilities for improving existing vegetative propagation techniques for aspen using stem cuttings obtained from micropropagated plants. Vegetative propagation through stem cuttings was studied in 10 micropropagated hybrid aspen clones (Populus tremula L. x P. tremuloides Michx). Cuttings containing one axillary bud were harvested from the same donor plants twice during the growing season: the first harvest in May and the second harvest in July. Rooting percentage was correlated positively with root length, number of roots and height of cutting plant but negatively with length of rooting. The average rooting percentage was 53% in the first harvest and 27% in second harvest. Indole-3-butyric acid treatments (1.2 mM) significantly improved rooting in the second harvest, but not in the first harvest, suggesting different endogenous auxin levels in the cuttings. A significant variation for most traits related to rooting ability was found among the clones, indicating that clonal effects play an important role in the propagation of aspen. Thus, clones with a good response in shoot growth and rooting could be exploited in large-scale propagation using stem cuttings.

  3. Assessment of potential soybean cadmium excluder cultivars at different concentrations of Cd in soils.

    Science.gov (United States)

    Zhi, Yang; He, Kangxin; Sun, Ting; Zhu, Yongqiang; Zhou, Qixing

    2015-09-01

    The selection of cadmium-excluding cultivars has been used to minimize the transfer of cadmium into the human food chain. In this experiment, five Chinese soybean plants were grown in three soils with different concentrations of Cd (0.15, 0.75 and 1.12mg/kg). Variations in uptake, enrichment, and translocation of Cd among these soybean cultivars were studied. The results indicated that the concentration of Cd in seeds that grew at 1.12mg/kg Cd in soils exceeded the permitted maximum levels in soybeans. Therefore, our results indicated that even some soybean cultivars grown on soils with permitted levels of Cd might accumulate higher concentrations of Cd in seeds that are hazardous to human health. The seeds of these five cultivars were further assessed for interactions between Cd and other mineral nutrient elements such as Ca, Cu, Fe, Mg, Mn and Zn. High Cd concentration in soil was found to inhibit the uptake of Mn. Furthermore, Fe and Zn accumulations were found to be enhanced in the seeds of all of the five soybean cultivars in response to high Cd concentration. Cultivar Tiefeng 31 was found to fit the criteria for a Cd-excluding cultivar under different concentrations of Cd in soils. Copyright © 2015. Published by Elsevier B.V.

  4. Mixing on a spherical shell by cutting and shuffling with non-orthogonal rotation axes

    Science.gov (United States)

    Lynn, Thomas; Umbanhowar, Paul; Ottino, Julio; Lueptow, Richard

    2017-11-01

    We examine a dynamical system that models the mixing of granular material in a half-filled spherical tumbler rotated about two horizontal alternating axes by using the machinery of cutting and shuffling through piecewise-isometries (PWI). Previous restrictions on how the domain is cut and shuffled are relaxed to allow non-orthogonal axes of rotation. Mixing is not only dependent on the amount of rotation used to induce mixing, but also on the relative orientation of the rotation axes. Well mixed regions within the PWI, which have a high density of cuts, typically interact with the periodic cutting boundary for both rotation axes. However, there are parameter combinations where the two rotations cut distinctly separate regions. The three-parameter space (a rotation about each axis and the relative orientation of the axes) is rich with detailed mixing features such as fractal boundaries and elliptic-like non-mixing regions. Supported by National Science Foundation Grant No. CMMI-1435065.

  5. Número necessário de experimentos para a comparação de cultivares de feijão Number of necessary experiments for the comparison in common bean cultivars

    Directory of Open Access Journals (Sweden)

    Alberto Cargnelutti Filho

    2006-12-01

    Full Text Available O objetivo deste trabalho foi determinar o número de medições (experimentos necessários à predição do desempenho de cultivares de feijão (Phaseolus vulgaris L.. Quatorze cultivares de feijão foram avaliadas em nove experimentos conduzidos em Santa Maria, Estado do Rio Grande do Sul (latitude 29°42'S, longitude 53°49'W e 95m de altitude, nos anos agrícolas de 2000/2001 a 2004/2005. As avaliações foram constituídas por produtividade de grãos, número de vagens por planta, número de sementes por vagem, massa de cem grãos, população final de plantas, número de dias da emergência ao florescimento, número de dias da emergência à colheita, altura de inserção da primeira vagem, altura de inserção da última vagem, grau de acamamento e coloração do tegumento dos grãos. As estimativas dos coeficientes de repetibilidade foram obtidas por três métodos - análise de variância, componentes principais e análise estrutural. Sete experimentos possibilitam a identificação de cultivares superiores de feijão em relação às características de produção, de fenologia e de morfologia, com 85% de exatidão no prognóstico de seu valor real.The objective of this research was to determine how many evaluations (experiments were necessary to predict the performance of common bean (Phaseolus vulgaris cultivars. Fourteen common beans cultivars were evaluated in nine experiments conducted in Santa Maria, in Rio Grande do Sul State, Brazil (latitude 29°42'S, longitude 53°49'W, altitude 95m in agricultural years from 2000/2001 to 2004/2005. The evaluations were constituted by grain yield, number of pods per plant, number of seeds per pod, weight of 100 grains, final population of plants, number of days of the emergency to flowering, number of days of the emergency to harvest, height of first pod insertion, height of the final pod insertion, degree of the down and colour of grain tegument. Repeatability estimations were obtained

  6. Stalk yield of sugarcane cultivars under different water regimes by subsurface drip irrigation

    Directory of Open Access Journals (Sweden)

    Aderson S. de Andrade Junior

    Full Text Available ABSTRACT This study aimed to evaluate the stalk yield of ten sugarcane cultivars (RB962962, RB931011, RB931530, RB98710, RB92579, RB867515, RB863129, SP791011, RB72545 and VAT90212 subjected to water deficit, full irrigation and water surplus by subsurface drip irrigation, during three cropping seasons (2011-2014. The experiment was conducted at the Experimental Field of Embrapa Meio-Norte, Teresina, Piauí State, Brazil, in dystrophic Red Yellow Argisol. The cultivars RB962962 (162.3 Mg ha-1 and RB867515 (158.5 Mg ha-1 have better stalk yield compared with other cultivars in all water regimes and cropping seasons.

  7. Characterization and Study of Transgenic Cultivars by Capillary and Microchip Electrophoresis

    Directory of Open Access Journals (Sweden)

    Elena Domínguez Vega

    2014-12-01

    Full Text Available Advances in biotechnology have increased the demand for suitable analytical techniques for the analysis of genetically modified organisms. Study of the substantial equivalence, discrimination between transgenic and non-transgenic cultivars, study of the unintended effects caused by a genetic modification or their response to diverse situations or stress conditions (e.g., environmental, climatic, infections are some of the concerns that need to be addressed. Capillary electrophoresis (CE is emerging as an alternative to conventional techniques for the study and characterization of genetically modified organisms. This article reviews the most recent applications of CE for the analysis and characterization of transgenic cultivars in the last five years. Different strategies have been described depending on the level analyzed (DNA, proteins or metabolites. Capillary gel electrophoresis (CGE has shown to be particularly useful for the analysis of DNA fragments amplified by PCR. Metabolites and proteins have been mainly separated using capillary zone electrophoresis (CZE using UV and MS detection. Electrophoretic chips have also proven their ability in the analysis of transgenic cultivars and a section describing the new applications is also included.

  8. Method of dismantling cylindrical structure by cutting

    International Nuclear Information System (INIS)

    Harada, Minoru; Mitsuo, Kohei; Yokota, Isoya; Nakamura, Kenjiro.

    1989-01-01

    This invention concerns a method of cutting and removing cylindrical structures, for example, iron-reinforced concrete materials such as thermal shielding walls in BWR type power plants into block-like form. That is, in a method of cutting and removing the cylindrical structure from the side of the outer wall, the structural material is cut from above to below successively in the axial direction and the circumferential direction by means abrasive jet by remote operation and cut into blocks each of a predetermined size. The cut out blocks are successively taken out. Cutting of the material from above to below by remote operation and taking out of small blocks causes no hazards to human body. Upon practicing the present invention, it is preferred to use a processing device for slurry and exhaust gases for preventing scattering of activated dismantled pieces or powdery dusts. (K.M.)

  9. A study of estimating cutting depth for multi-pass nanoscale cutting by using atomic force microscopy

    International Nuclear Information System (INIS)

    Lin, Zone-Ching; Hsu, Ying-Chih

    2012-01-01

    This paper studies two models for estimating cutting depth of multi-pass nanoscale cutting by using an atomic force microscopy (AFM) probe. One estimates cutting depth for multi-pass nanoscale cutting by using regression equations of nanoscale contact pressure factor (NCP factor) while the other uses equation of specific down force energy (SDFE). This paper proposes taking a diamond-coated probe of AFM as the cutting tool to carry out multi-pass nanoscale cutting experiments on the surface of sapphire substrate. In the process of experimentation, different down forces are set, and the probe shape of AFM is known, then using each down force to multi-pass cutting the sapphire substrate. From the measured experimental data of a central cutting depth of the machining groove by AFM, this paper calculates the specific down force energy of each down force. The experiment results reveal that the specific down force energy of each case of multi-pass nanoscale cutting for different down forces under a probe of AFM is close to a constant value. This paper also compares the nanoscale cutting results from estimating cutting depths for each pass of multi-pass among the experimental results and the calculating results obtained by the two theories models. It is found that the model of specific down force energy can calculate cutting depths for each nanoscale cutting pass by one equation. It is easier to use than the multi-regression equations of the nanoscale contact pressure factor. Besides, the estimations of cutting depth results obtained by the model of specific down force energy are closer to that of the experiment results. It shows that the proposed specific down force energy model in this paper is an acceptable model.

  10. Glycine betaine and salicylic acid induced modification in productivity of two different cultivars of wheat grown under water stress

    Directory of Open Access Journals (Sweden)

    Heshmat S. Aldesuquy

    2012-05-01

    Full Text Available A pot experiment was conducted to evaluate the beneficial effect of foliar application of glycine betaine (10mM, grain presoaking in salicylic acid (0.05 M and their interaction on drought tolerance of two wheat (Triticum aestivum L. cultivars (sensitive, Sakha 94 and resistant, Sakha 93. Water stress decreased wheat yield components (spike length, number of spikelets / main spike, 100 kernel weight, grain number / spike, grain yield / spike, grain yield / plant, straw yield / plant, crop yield / plant, harvest, mobilization and crop indices and the biochemical aspects of grains(grain biomass, carbohydrates, total protein, total phosphorus, ions content and amino acids in both wheat cultivars. The applied chemicals appeared to alleviate the negative effects of water stress on wheat productivity (particularly the sensitive one and the biochemical aspects of yielded grains. The effect was more pronounced with GB+SA treatment. This improvement would result from the repairing effect of the provided chemicals on growth and metabolism of wheat plants grown under water deficit condition. In response to the applied water stress and the used chemicals, the grain yield of the sensitive and resistant wheat cultivars was strongly correlated with all the estimated yield components (shoot length, spike length, plant height, main spike weight, number of spikelets per main spike, 100 kernel weight, grain number per spike, grain weight per plant, straw weight per plant, crop yield per plant, harvest, mobilization and crop indices.

  11. Resposta de cultivares de arroz a doses de nitrogênio e do regulador de crescimento cloreto de clormequat Response of rice cultivars to nitrogen and growth regulator chlormequat chloride

    Directory of Open Access Journals (Sweden)

    Salatiér Buzetti

    2006-12-01

    Full Text Available O objetivo deste trabalho foi avaliar os efeitos de doses de nitrogênio (0, 50, 100 e 150 kg ha-1 e do regulador de crescimento cloreto de clormequat (0, 1 e 2 L ha-1, em algumas características agronômicas de cultivares de arroz IAC 201 e IAC 202. O delineamento experimental foi o de blocos ao acaso, com quatro repetições. O N foi aplicado em cobertura, no estádio da diferenciação floral, e o regulador de crescimento foi aplicado parceladamente, aos 20 e 30 dias após a emergência das plântulas de arroz (perfilhamento. Na safra 2001/2002, houve efeito significativo de N para altura de plantas, comprimento da panícula, espiguetas por panícula, massa de 100 grãos e produtividade de grãos. Houve efeito do regulador de crescimento sobre o comprimento da panícula e espiguetas por panícula. A maior produtividade foi a da cultivar IAC 202. Na safra 2002/2003, houve efeito de N para altura de plantas, massa de 100 grãos, fertilidade das espiguetas e produtividade de grãos. O regulador de crescimento não exerceu efeito nas características testadas, e a cultivar IAC 202 foi novamente a mais produtiva.The objective of this work was to evaluate N rates (0, 50, 100 and 150 kg ha-1 and the growth regulator chlormequat chloride effect (0, 1 e 2 L ha-1 on some agronomic characteristics of rice cultivars IAC 201 and IAC 202. The experimental design was a randomized block with four replicates. Nitrogen was applied as side-dressing at flower differentiation and the growth regulator was split in two times and applied at 20 and 30 days after seedlings emergency (tillering. In the harvests of 2001/2002, there was no significant effect of N rates on plant height, panicle length, spikelet per panicle, 100-grain mass and grain yield. The growth regulator rates were significant for panicle length and spikelet per panicle. IAC 202 presented higher grain yield. In the harvest of 2002/2003 there was no effect of N rates on plant height, spikelet

  12. DESENVOLVIMENTO INICIAL DE CULTIVARES DE MELÃO FERTIRRIGADAS COM DISTINTAS PROPORÇÕES DE ESGOTO DOMÉSTICO EM MOSSORÓ-RN

    Directory of Open Access Journals (Sweden)

    FABRÍCIA GRATYELLI BEZERRA COSTA

    2014-01-01

    Full Text Available The inadequacy of sewage systems and water shortages in semi-arid Northeast is encouraging the reuse of water in the production of agricultural crops. This study aimed to analyze the effect of treated do- mestic sewage in the initial development of three melon cultivars in Mossoró-RN. The experiment was mounted on a split-plot in randomized blocks with plots cultivars of melon (Yellow Tikal, Cantaloupe type Harper and Gália and the split-plots the proportions of water supply and domestic sewage (T1 - 100% water supply T2 - 50% of water supply and 50% of domestic sewage, T3 - 25% of water supply and 75% of domestic sewage and T4 - 100% domestic sewage in three replicates. In the experimental period were analyzed for physico-chemical and microbiological characteristics of sewage and water supply. At 20 days after sowing was measured plant height, stem length, root length and stem diameter. The results showed that the fertirrigation of melon cultivars with domestic sewage minimizes the effect of water scarcity in semiarid. The development of cultivar Gália seedlings was not affected by application of primary domestic sewage. The T2 and T4 were the most suitable for the production of cultivar Gália seedlings.

  13. New Modelling Strategies For Metal Cutting

    International Nuclear Information System (INIS)

    Rosa, Pedro A. R.; Martins, Paulo A. F.; Atkins, Anthony G.

    2007-01-01

    This paper draws from the 'plasticity and friction only' view of metal cutting to the presentation of new modelling strategies based on the interaction between finite elements and modern ductile fracture mechanics. The overall presentation is supported by specially designed orthogonal metal cutting experiments that were performed on Lead test specimens under laboratory-controlled conditions. Comparisons between theoretical predictions and experimental results comprise a wide range of topics such as material flow, cutting forces and specific cutting pressure. The paper demonstrates that while material flow and chip formation can be successfully modelled by traditional 'plasticity and friction only' analyses, the contribution of the fracture work involved in the formation of new surfaces is essential for obtaining good estimates of cutting forces and of the specific cutting pressure

  14. Variation in Broccoli Cultivar Phytochemical Content under Organic and Conventional Management Systems: Implications in Breeding for Nutrition

    Science.gov (United States)

    Renaud, Erica N. C.; Lammerts van Bueren, Edith T.; Myers, James R.; Paulo, Maria João; van Eeuwijk, Fred A.; Zhu, Ning; Juvik, John A.

    2014-01-01

    Organic agriculture requires cultivars that can adapt to organic crop management systems without the use of synthetic pesticides as well as genotypes with improved nutritional value. The aim of this study encompassing 16 experiments was to compare 23 broccoli cultivars for the content of phytochemicals associated with health promotion grown under organic and conventional management in spring and fall plantings in two broccoli growing regions in the US (Oregon and Maine). The phytochemicals quantified included: glucosinolates (glucoraphanin, glucobrassicin, neoglucobrassin), tocopherols (δ-, γ-, α-tocopherol) and carotenoids (lutein, zeaxanthin, β-carotene). For glucoraphanin (17.5%) and lutein (13%), genotype was the major source of total variation; for glucobrassicin, region (36%) and the interaction of location and season (27.5%); and for neoglucobrassicin, both genotype (36.8%) and its interactions (34.4%) with season were important. For δ- and γ- tocopherols, season played the largest role in the total variation followed by location and genotype; for total carotenoids, genotype (8.41–13.03%) was the largest source of variation and its interactions with location and season. Overall, phytochemicals were not significantly influenced by management system. We observed that the cultivars with the highest concentrations of glucoraphanin had the lowest for glucobrassicin and neoglucobrassicin. The genotypes with high concentrations of glucobrassicin and neoglucobrassicin were the same cultivars and were early maturing F1 hybrids. Cultivars highest in tocopherols and carotenoids were open pollinated or early maturing F1 hybrids. We identified distinct locations and seasons where phytochemical performance was higher for each compound. Correlations among horticulture traits and phytochemicals demonstrated that glucoraphanin was negatively correlated with the carotenoids and the carotenoids were correlated with one another. Little or no association between

  15. DESIGN AND DEVELOPMENT OF SPECIAL CUTTING SYSTEM FOR SWEET SORGHUM HARVESTER

    Directory of Open Access Journals (Sweden)

    OMID GHAHRAE

    2009-03-01

    Full Text Available Sweet Sorghum is similar to racemose maize with about 3m height and 0.5-3cm thickness of stalk. Sweet Sorghum has sweet flavor stalk, which is used for sugar production. Developed cutting mechanism in this research has a rotary disk with 50 cm diameter and four cutting blades that spin clockwise. The stalks are cut with the impact and inertia forces at the linear velocity of 27 m/s, by cutting blades. This system has a simple bar mechanism guiding the whole-stalk to one side. The cutting quality tests were achieved by two series of blades with 30°and 45° blade angles on the stalk. The results showed that the stalk cutting surface with 30° blade angle was smooth and without fracture on filaments and vasculums, compared to that of 45° blade angle. Blade penetration was accomplished very well with 30° blade angle.

  16. Investigation of Tolerance, Yield and Yield Components of Wheat Cultivars to Salinity of Irrigation Water at Sensitive Stages of Growth

    Directory of Open Access Journals (Sweden)

    B Saadatian

    2013-04-01

    Full Text Available This research in order to study of tolerance ability of wheat cultivates yield and yield components to salinity of irrigation water at sensitive stages of growth, was carried out as a factorial based on a randomized complete block design with 3 replications at greenhouse of Agricultural Faculty of Bu-Ali Sina University, in 2009. Treatments were included wheat cultivars of Alvand, Tous, Sayson and Navid and salinity of irrigation water induced by sodium chloride at five levels of 0, 4, 8, 12 and 16 dS m-1. The results showed that percentage and rate of emergence, plant height, 1000-grain weight, number of seed per spike, number of spike per pot, biological and grain yield reduced by increasing salinity level. At all stress levels Navid cv. had highest emergence percentage. In non-stress and 4 dS m-1, Alvand cv. and at higher levels of stress, Tous cv. had high height in reproductive phase. At control and 4 dS m-1, Sayson cv. and at 8, 12 and 16 dS m-1, Tous cv. in majority of yield and yield components traits had significant superior than other cultivars. Tolerance index of Sayson cv. at 4 and 8 dS m-1 was more than other cultivars but at 12 and 16 dS m-1, maximum value of this index was belonged to Tous cv. At all salinity levels, Alvand cv. had least tolerance index to stress. Number of spike per pot had maximum direct effect on grain yield of wheat cultivars in stress condition. Also indirect effect of biological yield via number of spike per pot than other its indirect effects, had maximum share in wheat seed yield.

  17. [Effects of intercropping Chinese onion cultivars of different allelopathic potential on cucumber growth and soil micro-environment].

    Science.gov (United States)

    Yang, Yang; Wu, Feng-zhi

    2011-10-01

    A pot experiment was conducted to study the effects of intercropping various Chinese onion cultivars of different allelopathic potential on the cucumber growth and rhizospheric soil environment. When intercropped with high allelopathic Chinese onion cultivars, the EC value and peroxidase activity of cucumber rhizospheric soil decreased, while the pH value, invertase and catalase activities, and bacterial community diversity increased. The cloning and sequencing results indicated that most DGGE bands amplified from cucumber rhizospheric soil samples showed a high homology to uncultured bacterial species. The common bands were affiliated with Actinobacteria and Proteobacteria, and the differential bacteria bands were affiliated with Proteobacteria and Anaerolineaceae. Rhodospirillales and Acidobacteria were only found in the cucumber rhizospheric soil intercropped with low allelopathic Chinese onion cultivars. Correlation analysis showed that there were significant positive correlations between rhizospheric soil urease activity and cucumber seedlings height, total dry biomass, leaf area, and DGGE band number. It was suggested that intercropping high allelopathic Chinese onion cultivars could establish a good rhizospheric soil micro-environment for cucumber growth, and promote the growth of cucumber seedlings markedly.

  18. Targeted genotyping-by-sequencing permits cost-effective identification and discrimination of pasture grass species and cultivars.

    Science.gov (United States)

    Pembleton, Luke W; Drayton, Michelle C; Bain, Melissa; Baillie, Rebecca C; Inch, Courtney; Spangenberg, German C; Wang, Junping; Forster, John W; Cogan, Noel O I

    2016-05-01

    A targeted amplicon-based genotyping-by-sequencing approach has permitted cost-effective and accurate discrimination between ryegrass species (perennial, Italian and inter-species hybrid), and identification of cultivars based on bulked samples. Perennial ryegrass and Italian ryegrass are the most important temperate forage species for global agriculture, and are represented in the commercial pasture seed market by numerous cultivars each composed of multiple highly heterozygous individuals. Previous studies have identified difficulties in the use of morphophysiological criteria to discriminate between these two closely related taxa. Recently, a highly multiplexed single nucleotide polymorphism (SNP)-based genotyping assay has been developed that permits accurate differentiation between both species and cultivars of ryegrasses at the genetic level. This assay has since been further developed into an amplicon-based genotyping-by-sequencing (GBS) approach implemented on a second-generation sequencing platform, allowing accelerated throughput and ca. sixfold reduction in cost. Using the GBS approach, 63 cultivars of perennial, Italian and interspecific hybrid ryegrasses, as well as intergeneric Festulolium hybrids, were genotyped. The genetic relationships between cultivars were interpreted in terms of known breeding histories and indistinct species boundaries within the Lolium genus, as well as suitability of current cultivar registration methodologies. An example of applicability to quality assurance and control (QA/QC) of seed purity is also described. Rapid, low-cost genotypic assays provide new opportunities for breeders to more fully explore genetic diversity within breeding programs, allowing the combination of novel unique genetic backgrounds. Such tools also offer the potential to more accurately define cultivar identities, allowing protection of varieties in the commercial market and supporting processes of cultivar accreditation and quality assurance.

  19. Experimental test of theory for the stability of partially saturated vertical cut slopes

    Science.gov (United States)

    Morse, Michael M.; Lu, N.; Wayllace, Alexandra; Godt, Jonathan W.; Take, W.A.

    2014-01-01

    This paper extends Culmann's vertical-cut analysis to unsaturated soils. To test the extended theory, unsaturated sand was compacted to a uniform porosity and moisture content in a laboratory apparatus. A sliding door that extended the height of the free face of the slope was lowered until the vertical cut failed. Digital images of the slope cross section and upper surface were acquired concurrently. A recently developed particle image velocimetry (PIV) tool was used to quantify soil displacement. The PIV analysis showed strain localization at varying distances from the sliding door prior to failure. The areas of localized strain were coincident with the location of the slope crest after failure. Shear-strength and soil-water-characteristic parameters of the sand were independently tested for use in extended analyses of the vertical-cut stability and of the failure plane angle. Experimental failure heights were within 22.3% of the heights predicted using the extended theory.

  20. Monitoring machining conditions by analyzing cutting force vibration

    Energy Technology Data Exchange (ETDEWEB)

    Piao, Chun Guang; Kim, Ju Wan; Kim, Jin Oh; Shin, Yoan [Soongsl University, Seoul (Korea, Republic of)

    2015-09-15

    This paper deals with an experimental technique for monitoring machining conditions by analyzing cutting-force vibration measured at a milling machine. This technique is based on the relationship of the cutting-force vibrations with the feed rate and cutting depth as reported earlier. The measurement system consists of dynamic force transducers and a signal amplifier. The analysis system includes an oscilloscope and a computer with a LabVIEW program. Experiments were carried out at various feed rates and cutting depths, while the rotating speed was kept constant. The magnitude of the cutting force vibration component corresponding to the number of cutting edges multiplied by the frequency of rotation was linearly correlated with the machining conditions. When one condition of machining is known, another condition can be identified by analyzing the cutting-force vibration.

  1. Monitoring machining conditions by analyzing cutting force vibration

    International Nuclear Information System (INIS)

    Piao, Chun Guang; Kim, Ju Wan; Kim, Jin Oh; Shin, Yoan

    2015-01-01

    This paper deals with an experimental technique for monitoring machining conditions by analyzing cutting-force vibration measured at a milling machine. This technique is based on the relationship of the cutting-force vibrations with the feed rate and cutting depth as reported earlier. The measurement system consists of dynamic force transducers and a signal amplifier. The analysis system includes an oscilloscope and a computer with a LabVIEW program. Experiments were carried out at various feed rates and cutting depths, while the rotating speed was kept constant. The magnitude of the cutting force vibration component corresponding to the number of cutting edges multiplied by the frequency of rotation was linearly correlated with the machining conditions. When one condition of machining is known, another condition can be identified by analyzing the cutting-force vibration

  2. Leaf-cutting ant attack in initial pine plantations and growth of defoliated plants

    Directory of Open Access Journals (Sweden)

    Mariane Aparecida Nickele

    2012-07-01

    Full Text Available The objective of this work was to evaluate the natural attack by Acromyrmex crassispinus in initial Pinus taeda plantations without control measures against ants, as well as the effect of defoliation in seedlings of P. taeda. Evaluations of the attack of leaf-cutting ants on P. taeda plantations were done monthly in the first six months, then 9 and 12 months after planting. The percentages of plants that were naturally attacked by ants were registered. The effect of defoliation was evaluated by artificial defoliation, simulating the natural patterns of attack by A. crassispinus on P. taeda seedlings. The natural attack of A. crassispinus was greater during the first months after planting, being more intense in the first 30 days. Artificial defoliation indicated that there were no significant losses in diameter and height in plants with less than 75% defoliation. However, there were significant losses in diameter and height in plants with 100% defoliation, independently of the cut of the apical meristem, and also plant death. The control of leaf-cutting ants in P. taeda plantings, in which A. crassispinus is the most frequent leaf-cutting ant, should be intense only at the beginning of planting, since the most severe attacks occur during this time.

  3. Características do óleo essencial de capim-citronela em função de espaçamento, altura e época de corte Essential oil characteristics from citronella grass depending on planting space, cutting height and harvesting time

    Directory of Open Access Journals (Sweden)

    Cláudia A Marco

    2007-09-01

    Full Text Available A importância do capim-citronela (Cymbopogon winterianum Jowitt. tem crescido nos últimos anos no mercado de produtos naturais, devido à grande procura pelo seu óleo essencial. Neste trabalho, objetivou-se avaliar a influência do espaçamento (50 x 50; 50 x 80 e 80 x 80 cm, altura (15 e 30 cm do solo e época de corte (quatro, seis e oito meses após o plantio na produção e qualidade do óleo essencial de capim-citronela. Desenvolveu-se um ensaio na Fazenda Experimental Vale do Curu (FEVC, pertencente ao Centro de Ciências Agrárias, da Universidade Federal do Ceará, em Pentecoste - CE, no período de setembro de 2002 a setembro de 2003. Os tratamentos foram arranjados como fatorial 3 x 3 x 2, dispostos em blocos casualizados, com três repetições. Plantas colhidas quatro meses após o plantio apresentaram significativamente maior produção de óleo essencial se cortadas a 30 cm de altura. Já plantas colhidas seis meses após o plantio apresentaram maior produção de óleo essencial se cortadas a 15 cm de altura. Para plantas colhidas oito meses após o plantio, a altura de corte não interferiu na produção de óleo essencial. Para espaçamentos mais largos (80 x 80 cm, a produção de óleo essencial foi significativamente mais alta para plantas cortadas a 15 cm, acontecendo o inverso no espaçamento menor (50 x 50 cm. Quando foram avaliados os constituintes citronelol + citronelal observou-se que seus teores foram significativamente mais elevados em plantas cultivadas no espaçamento intermediário, colhidas após os seis meses e a 30 cm de altura. Já o teor de geraniol foi superior em plantas colhidas quatro meses após o plantio, porém não houve influência do espaçamento e altura de corte sobre o seu teor.Citronella grass (Cymbopogon winterianum Jowitt. has grown in importance due to an increasing demand of the essential oil. The influence of spacing (50 x 50; 50 x 80 e 80 x 80 cm, cutting height (15 and 30 cm above

  4. Genetic analysis of plant height in induced mutants of aromatic rice

    International Nuclear Information System (INIS)

    Kole, P.C.

    2005-01-01

    Inheritance of plant height in five gamma-ray induced mutants of aromatic rice cultivar Gobindabhog was studied through 6 x 6 diallel cross and segregation analyses. Diallel analysis revealed presence of additive and non-additive gene action with the preponderance of the latter. Proportion of dominant and recessive alleles was distributed unequally among the parents. The direction of dominance was towards tallness. The number of groups of genes was found to be three. The segregation analysis indicated the role of a single major recessive gene for height reduction in three mutants and, in another mutant, a single major recessive gene with negative modifiers. The other semi-dwarf mutant had two major recessive genes with almost equal effect in height reduction. The mutant allele(s) of the latter two mutants were non-allelic to sd sub(1) gene, which could be used as an alternative source of Dee Gee Woo Gen to widen the genetic diversity in semi-dwarfism [it

  5. Rapid identification of red-flesh loquat cultivars using EST-SSR markers based on manual cultivar identification diagram strategy.

    Science.gov (United States)

    Li, X Y; Xu, H X; Chen, J W

    2014-04-29

    Manual cultivar identification diagram is a new strategy for plant cultivar identification based on DNA markers, providing information to efficiently separate cultivars. We tested 25 pairs of apple EST-SSR primers for amplification of PCR products from loquat cultivars. These EST-SSR primers provided clear amplification products from the loquat cultivars, with a relatively high transferability rate of 84% to loquat; 11 pairs of primers amplified polymorphic products. After analysis of 24 red-fleshed loquat accessions, we found that only 7 pairs of primers could clearly separate all of them. A cultivar identification diagram of the 24 cultivars was constructed using polymorphic bands from the DNA fingerprints and EST-SSR primers. Any two of the 24 cultivars could be rapidly separated from each other, according to the polymorphic bands from the cultivars; the corresponding primers were marked in the correct position on the cultivar identification diagram. This red-flesh loquat cultivar identification diagram can separate the 24 red-flesh loquat cultivars, which is of benefit for loquat cultivar identification for germplasm management and breeding programs.

  6. Major Co-localized QTL for Plant Height, Branch Initiation Height, Stem Diameter, and Flowering Time in an Alien Introgression Derived Brassica napus DH Population

    Directory of Open Access Journals (Sweden)

    Yusen Shen

    2018-03-01

    Full Text Available Plant height (PH, branch initiation height (BIH, and stem diameter (SD are three stem-related traits that play crucial roles in plant architecture and lodging resistance. Herein, we show one doubled haploid (DH population obtained from a cross between Y689 (one Capsella bursa-pastoris derived Brassica napus intertribal introgression and Westar (B. napus cultivar that these traits were significantly positively correlated with one another and with flowering time (FT. Based on a high-density SNP map, a total of 102 additive quantitative trait loci (QTL were identified across six environments. Seventy-two consensus QTL and 49 unique QTL were identified using a two-round strategy of QTL meta-analysis. Notably, a total of 19 major QTL, including 11 novel ones, were detected for these traits, which comprised two QTL clusters on chromosomes A02 and A07. Conditional QTL mapping was performed to preliminarily evaluate the genetic basis (pleiotropy or tight linkage of the co-localized QTL. In addition, QTL by environment interactions (QEI mapping was performed to verify the additive QTL and estimate the QEI effect. In the genomic regions of all major QTL, orthologs of the genes involved in phytohormone biosynthesis, phytohormone signaling, flower development, and cell differentiation in Arabidopsis were proposed as candidate genes. Of these, BnaA02g02560, an ortholog of Arabidopsis GASA4, was suggested as a candidate gene for PH, SD, and FT; and BnaA02g08490, an ortholog of Arabidopsis GNL, was associated with PH, BIH and FT. These results provide useful information for further genetic studies on stem-related traits and plant growth adaptation.

  7. Intercropping of taro and sunn hemp with cutting periods during the cycle

    Directory of Open Access Journals (Sweden)

    João Nacir Colombo

    Full Text Available ABSTRACT Intercropping using legumes is one of the ways to protect the main crop, and in long term improve the physical and chemical properties of the soil. The aim of this work was to evaluate the intercropping of Colocasia esculenta (L. Schott (taro and the tropical legume Crotalaria juncea L. (sunn hemp, cutting sunn hemp at ten periods during the cycle. The experiment was carried out under field conditions between 09/23/2010 and 06/04/2011. It consisted of 11 treatments related to the 10 cutting times of sunn hemp (55, 70, 85,100, 115, 130, 145, 160, 190, and 220 days after sowing - DAS plus a control of taro with no sunn hemp. During the cycle, taro was evaluated for plant height and incidence of leaf burn. At the time of cutting the sunn hemp, the plant height, fresh and dry matter masses, and nutrient content of the biomass were calculated. During taro harvest, we evaluated the productivity of the mother rhizomes and classified the cormels. Taro plants shaded by sunn hemp showed a lower incidence of leaf burn. The sunn hemp cut from 145 DAS onwards affected the yield of comercial rhizomes and total and agroeconomic indexes. Sunn hemp cut up to 130 DAS provided better performance of taro, without compromising productivity and economic indicators, with the highest amounts of N and K observed in the biomass cut at 115 DAS.

  8. Apple cultivars resistant to scab (Venturia inaequalis (Cke. Aderh. Part II. Winterhardiness of apple cultivars

    Directory of Open Access Journals (Sweden)

    Zbigniew Borecki

    2013-12-01

    Full Text Available The severe winter which occurred in Poland in 1986-1987 damaged the most part of scab resistant apple cultivars and selected apple hybrids. Cold hardiness studied in 1987 and 1988 showed significant differences in degree of frost injury on stem, branches, twigs and buds of apple trees. Two scab-resistance cultivars, namely Florina and Sir Prize, as well as two check culuvars, Idared and Golden Delicious, were killed by frost. Strong damages were noted in cultivars: Prima, Primula, and Priam. Lower susceptibility showed: Jonafree, Gavin, Liberty Sister and three hybrids selected from crosses of Bankroft with scab-resistant Primula. Relatively frost resistant was Novamac and three hybrids of U-breeding line: U-1101 and U-50, originated from crosses of polish culrivar Fantazja (McIntosh x Linda with Primula, Highest resistance to frost showed cultivars: Freedom. Liberty. new polish cultivar Witos (Fantazja x Primula and three hybrids: U-337, U-237 and U-1098. During the 1987 and 1988 seasons severe infection of apple trees by numerous fungi was noted. Twelve species of isolated fungi were identified as pathogens of apple trees bark and wood.

  9. Efeito de doses reduzidas de oxyfluorfen em cultivares de algodoeiro Effect of reduced oxyfluorfen rates on cotton cultivars

    Directory of Open Access Journals (Sweden)

    O.M. Yamashita

    2008-01-01

    incur in plant intoxication and losses to the farmer. The objective of this work was to evaluate the effects of oxyfluorfen on five cotton cultivars at the initial development phase. The cotton cultivars were treated with 90 and 180 g ha-1 of the herbicide applied 15 and 30 days after sowing. For the analyzed variables (phytointoxication, plant height, number of leaves, plant dry mass, no difference was found among the cotton cultivars, with the smaller plants suffering more than the older plants, leading to increased damages, as doses increased.

  10. Study of Sowing Date and Seed Priming Effect on Seed Yield, Its Components and Some of Agronomic and Qualitative Properties of Two Spring Canola Cultivars in Hamedan

    Directory of Open Access Journals (Sweden)

    A. Mohagheghi

    2014-12-01

    Full Text Available To determine the effect of planting date, cultivar and seed priming on yield, yield components, oil and protein content of seeds of two spring canola cultivars a field experiment was conducted in Bu-Ali Sina University in 2012. The experiment was factorial in a randomized complete block design with three replications. Factors consisted of sowing dates (14 and 24th March and 3rd April, seed priming treatments (no-primed, primed with water and zinc sulfate solution and two canola cultivars (Hayola401 and RGS003. The evaluated traits were number of pod per plant, number of seed per pod, 1000 seeds weight, plant height, oil and protein percentage, yields of seed, oil and biologic and harvest index. The results showed that delay in sowing, except of seed protein percentage, decreased all traits. Seed priming could increase traits of plant height, 1000 seed weight, number of seed per pod, oil percentage and yield and protein percentage in all sowing dates. Seed priming with zinc sulfate solution and water increased the number of pod per plant 16.1 and 10.5 percent, respectively compared to no-primed treatment. The highest seed number per pod was achieved through the priming with water and zinc sulfate solution with an average of 14.3, in the first sowing date for Hayola401 cultivar. Priming with water, especially in the third sowing date increased oil yield by 56 percent in RGS003 cultivar in comparison with its no-primed treatment. Also priming with zinc sulfate and water, increased the harvest index 5.04 and 3.7% respectively compared to no-primed treatment. In general in the case of delay in sowing date in spring rapeseed cultivars especially for RGS003, primed seed preferably with zinc sulfate improves the quantitative and qualitative characteristics of the production.

  11. SENSITIVITY TO ENVIRONMENTAL STRESS OF PRATA,JAPIRA AND VITÓRIA BANANA CULTIVARS PROVEN BY CHLOROPHYLL a FLUORESCENCE

    Directory of Open Access Journals (Sweden)

    PRISCILA NOBRES DOS SANTOS

    Full Text Available ABSTRACT This study aimed to evaluate the physiological responses to environmental stress during pre- and post-harvest of the following banana cultivars: Prata (AAB, Japira (AAAB and Vitoria (AAAB. Analyses were carried out on young plants at vegetative stage (daughter-plant and adult plants at reproductive stage (motherplant. The experimental design was completely randomized. In the in vivo pre-harvest analysis were used seven replications, in a factorial scheme (3x2x2, three cultivars and two stages (vegetative and reproductive and two collection periods (March and June. For the analysis of post-harvest quality were used five replications in a factorial design (3x2x5, corresponding to three cultivars, two development stages and five periods of post-harvest analysis, carried out every two days from stage 4 of fruit ripening. The chlorophyll a fluorescence emission kinetics showed low photochemical performance of the three cultivars in June, a period characterized by lower temperatures and water deficit. Prata was the cultivar with the lowest tolerance to abiotic physiological behavior changes, which also reflected in fruit quality, because there was a change in physical and physicochemical parameters. Japira and Vitoria cultivars showed similar physiological responses in the pre- and post-harvest periods, according to their phylogenetic proximity. The total performance index, i.e., the conservation of energy absorbed by PSII up to the reduction of the final PSI acceptors (PItotal and the di-malonic aldehyde (MDA content were significantly higher in Japira and Vitoria cultivars compared to Prata cultivar in the reproductive phase. There was no significant change in the potential quantum efficiency of PSII (FV / FM = jP0 among the three cultivars. It was concluded that Japira and Vitoria cultivars showed greater plasticity to tolerate or even adapt to abiotic variations keeping higher fruit yield. PItotal is the most sensitive parameter during

  12. Crescimento radicular e aéreo de cultivares de arroz de terras altas em função da calagem Root and shoot growth of upland rice cultivars as affected by lime application

    Directory of Open Access Journals (Sweden)

    Carlos Alexandre Costa Crusciol

    2012-01-01

    Full Text Available O presente trabalho teve como objetivo avaliar o crescimento radicular e da parte aérea, além da eficiência de absorção de nutrientes pelas cultivares de arroz Caiapó e Maravilha, em função da calagem. O experimento foi desenvolvido em casa de vegetação, sendo os tratamentos constituídos pelas cultivares Caiapó e Maravilha combinadas com os índices de saturação por bases (V% de 10, 40 e 70. O delineamento experimental utilizado foi inteiramente casualizado, com quatro repetições. Foram avaliados o número de perfilhos, comprimento radicular, matéria seca de raízes, folhas e colmos, o teor foliar e a eficiência de absorção dos macronutrientes. De forma geral, observou-se que a cultivar moderna superou a tradicional em matéria seca de raízes, comprimento radicular, número de colmos, matéria seca de colmos e da parte aérea, além de acumular mais nutrientes a cultivar tradicional, mesmo nas condições de maior acidez. No entanto, os teores de nutrientes foram maiores na cultivar Caiapó. A cultivar Maravilha possui maior crescimento radicular e da parte aérea, nos diversos níveis de acidez, enquanto a Caiapó tem maior eficiência de absorção dos nutrientes do solo. A V% de 40 é a mais efetiva para ambas as cultivares.This work aimed to evaluate root growth, shoot development and nutrient absorption efficiency by rice cultivars Caiapó and Maravilha as affected by lime application. The experiment was carried out in a greenhouse, with treatments set up by Caiapó and Maravilha cultivars in combination with the base saturation (V% of 10%, 40% and 70%. The experiment was in a randomized complete block design, with four replications. The number of tillers, root length, root dry matter, leaves and stems, leaf content and macronutrients absorption efficiency were evaluated. Comparing cultivars, Maravilha cultivar presented higher root dry weight, root length, number of stems, dry matter of stems and shoot than Caiap

  13. Effect of nitrogen fertilization, grass species and cultivar on sod production on Valkeasuo peat bog - a case study

    Directory of Open Access Journals (Sweden)

    Perttu Virkajärvi

    1997-09-01

    Full Text Available As part of a research project concerning the agricultural utilization of cut-away peat bogs, a sod production experiment was conducted at Valkeasuo, Tohmajärvi, in 1990-1993. The aim of the experiment was to study the effect of nitrogen and choice of cultivar on sod production and sod quality on peat bogs. The N fertilization rates were 50, 100 and 150kg ha-1. The Poa pratensis cultivars were ‘Conni’, ‘Cynthia’, ‘Haga’ and ‘Julia’, the Festuca rubra cultivars were ‘Center’, ‘Juliska’, ‘Koket’ and ‘Näpsä’ and the Agrostis capillaris cultivar was ‘Rasti’. Two mixtures of P. pratensis/F. rubra and one of A. capillaris/F. rubra imitated commercial sod products. Increasing of N fertilization from 50 kg up to 150 kg ha-1 a had positive effect on general the quality of sod as well as on the green cover before and after transplanting. It increased the thatch formation. The positive effect of N on the number of tillers and green cover in the year following transplanting was dependent on the species and the cultivar. Species and cultivar affected all measured variables excluding thatch formation. Generally, the P. pratensis cultivars tested suited better for sod production than cultivars of F. rubra, but there were clear differences between cultivars within species as well. Although the soil was infertile, the contents of Ca, K, Mg, P, Cu, Fe, Mn, Mo and Zn in the herbage samples were within normal range. The botanical purity was high, which supports the hypothesis that the absence of seed bank of weeds on peat bogs immediately after harvesting the peat can be utilized.

  14. ''In vivo'' methodology for mutation induction in banana, cultivar ''Maca''

    International Nuclear Information System (INIS)

    Tulmann Neto, A.; Domingues, E.T.; Alvarez, A.L.F.; Mendez, B.M.J.; Ando, A.

    1990-01-01

    Full text: The ''Maca'' cultivar is a banana of high acceptability in the south west of Brazil. However, it is very susceptible to several diseases. Due to the difficulties in the application of the traditional plant breeding methods, the Radiation Genetics Section of CENA is utilising the ''in vivo'', and the ''in vitro'' mutation breeding approach. The ''in vivo'' methodology is based on the work of HAMILTON. This method is being utilised in Brazil for rapid banana propagation. Rhizomes (20 cm diameter) were obtained from young field grown plants before flower differentiation. In these rhizomes, only 5-6 leaf sheaths were retained, the others being removed. The rhizomes were maintained in a greenhouse in boxes with vermiculite, covered with plastic. After one week, all leaf sheaths were removed, until the exposure of the meristematic apex with about 2 mm size. This apex was cut off with a scalpel and a cross shaped cut (2,5 cm) was made. This stimulates the development of lateral buds. After four months, the meristematic apices of these new buds were cut off in the same way and immediately the rhizomes were irradiated with gamma rays. Around the eliminated lateral buds callus developed and new lateral buds were formed. The LD 50 in relation to the number of these new buds produced was around 30 Gy. According to the author of the original method, from the callus one can obtain axillary or adventitious buds. In the early stages it is possible, based on the shape, to distinguish both types. The advantage of utilising adventitious buds originating from only one cell to avoid chimerism is well known in mutation breeding. However, it is not certain whether this is the case in the present method. After detachment from rhizomes and rooting in soil, plants with 15-20 cm height were inoculated with Fusarium oxysporum f.sp. cubense. After 3 weeks the plants showed symptoms of the Panama disease and screening could be done at this stage. The total time between the removal of

  15. ''In vivo'' methodology for mutation induction in banana, cultivar ''Maca''

    Energy Technology Data Exchange (ETDEWEB)

    Tulmann Neto, A; Domingues, E T; Alvarez, A L.F.; Mendez, B M.J.; Ando, A [Centre for Nuclear Energy in Agriculture (CENA), University of Sao Paulo, Piracicaba, SP. (Brazil)

    1990-07-01

    Full text: The ''Maca'' cultivar is a banana of high acceptability in the south west of Brazil. However, it is very susceptible to several diseases. Due to the difficulties in the application of the traditional plant breeding methods, the Radiation Genetics Section of CENA is utilising the ''in vivo'', and the ''in vitro'' mutation breeding approach. The ''in vivo'' methodology is based on the work of HAMILTON. This method is being utilised in Brazil for rapid banana propagation. Rhizomes (20 cm diameter) were obtained from young field grown plants before flower differentiation. In these rhizomes, only 5-6 leaf sheaths were retained, the others being removed. The rhizomes were maintained in a greenhouse in boxes with vermiculite, covered with plastic. After one week, all leaf sheaths were removed, until the exposure of the meristematic apex with about 2 mm size. This apex was cut off with a scalpel and a cross shaped cut (2,5 cm) was made. This stimulates the development of lateral buds. After four months, the meristematic apices of these new buds were cut off in the same way and immediately the rhizomes were irradiated with gamma rays. Around the eliminated lateral buds callus developed and new lateral buds were formed. The LD{sub 50} in relation to the number of these new buds produced was around 30 Gy. According to the author of the original method, from the callus one can obtain axillary or adventitious buds. In the early stages it is possible, based on the shape, to distinguish both types. The advantage of utilising adventitious buds originating from only one cell to avoid chimerism is well known in mutation breeding. However, it is not certain whether this is the case in the present method. After detachment from rhizomes and rooting in soil, plants with 15-20 cm height were inoculated with Fusarium oxysporum f.sp. cubense. After 3 weeks the plants showed symptoms of the Panama disease and screening could be done at this stage. The total time between the

  16. A functional-structural plant model for cut roses - new techniques for modelling manipulation of plant structure

    NARCIS (Netherlands)

    Buck-Sorlin, G.H.; Burema, B.S.; Vos, J.; Lieth, J.H.; Heuvelink, E.; Visser, de P.H.B.; Marcelis, L.F.M.

    2011-01-01

    Experience is the main guide for cut rose growers to make decisions on crop management and climate control. Because of continuous change in cultivar characteristics and technology there is a need for a general theory, capturing how the number of flower shoots produced and their quality depend on the

  17. Uptake kinetics of arsenic by lettuce cultivars under hydroponics ...

    African Journals Online (AJOL)

    Arsenic (As) uptake ability based on kinetic parameters by two lettuce cultivars; Sijibaiye (SJBY) and Texuanyanlingsun (TXYLS) was investigated in nutrient solution containing eight levels of arsenic (As). Depletion of As from solution was monitored over a period of 24 h at regular time to estimate As uptake kinetics of the ...

  18. CARACTERÍSTICAS AGRONÔMICAS DE CULTIVARES DE SORGO (Sorghum bicolor (L. Moench SOB TRÊS DOSES DE NITROGÊNIO AGRONOMIC TRAITS OF SORGHUM CULTIVARS AT THREE LEVELS OF NITROGEN FERTILIZER

    Directory of Open Access Journals (Sweden)

    Susana Queiroz Santos Mello

    2007-09-01

    test was used for comparison of treatment means. The yields of natural matter, with general average 59.31 t.ha-1, were significantly different among sorghum cultivars; but there was no difference caused by nitrogen levels in this trait. The dry matter yield mean (15.17 t.ha-1 did not differ among cultivars or nitrogen levels. As opposed, dry matter and panicle and stalk contents in the natural matter were different among cultivars as well as among N levels. The plant height (with general average 2.39 m and stalk dry matter means were different only among cultivars. BR 700 and CMSXS 762 cultivars showed the best panicle/stalk/leaf ratio and the largest panicle percentage. Increased amounts of nitrogen resulted in increased panicle and decreased stalk percentage.

    KEY-WORDS: Sorghum; nitrogen fertilization; agronomic valuation.

  19. Flocking of the Motsch-Tadmor Model with a Cut-Off Interaction Function

    Science.gov (United States)

    Jin, Chunyin

    2018-04-01

    In this paper, we study the flocking behavior of the Motsch-Tadmor model with a cut-off interaction function. Our analysis shows that connectedness is important for flocking of this kind of model. Fortunately, we get a sufficient condition imposed only on the model parameters and initial data to guarantee the connectedness of the neighbor graph associated with the system. Then we present a theoretical analysis for flocking, and show that the system achieves consensus at an exponential rate.

  20. Enraizamento de estacas herbáceas de mirtilo: influência da lesão na base e do ácido indolbutírico Rooting of herbaceous blueberry cuttings: influence of the base incision and indolbutiric acid

    Directory of Open Access Journals (Sweden)

    Renato Trevisan

    2008-04-01

    Full Text Available O mirtilo (Vaccinium sp. é uma espécie de clima temperado que, por ocasião do período vegetativo, produz abundante quantidade de material vegetal que pode ser utilizado na propagação. Objetivou-se verificar o potencial de enraizamento de estacas herbáceas de diferentes cultivares de mirtilo, tratadas ou não com ácido indolbutírico e com e sem lesão na base. O trabalho foi realizado em dois experimentos, testando a capacidade de enraizamento das cultivares Florida, Woodard, Bluegem, Bluebele, Clímax e Briteblue. No primeiro experimento, as estacas das cultivares foram tratadas com AIB (0, 2500, 5000 e 7500mgL-1. No segundo experimento utilizou-se 2000mgL-1 de AIB, em estacas com e sem lesão na base. O delineamento utilizado foi completamente casualizado com repetições e unidades experimentais adequadas para cada experimento. O uso do ácido indolbutírico e a lesão nas estacas, não proporcionaram estímulo na emissão de raízes adventícias; as cultivares apresentam potencial genético de enraizamento diferenciado, sendo que, a Bluebelle apresentou maiores porcentuais de estacas enraizadas, e a Clímax, os menores porcentuais.Blueberries (Vaccinium sp. are species of temperate climate that, for occasion of the vegetative period, produce large amount of vegetal material that can be used in the propagation. This way, with the aim of verifying the rooting potential of different herbaceous cuttings of blueberry cultivars, with the use or not of indolbutíric acid and base injury. The work was carried out in two experiments, having tested the capacity of rooting of the following cultivars Florida, Woodard, Bluegem, Bluebele, Clímax and Briteblue. In the first experiment, cuttings of cultivars were treated with IBA (0, 2500, 5000 and 7500mg.L-1. On the second experiment one used 2000mg.L-1 of AIB, in cuttings with and without injury in the base. The experimental design was the completely randomized with adjusted repetitions and

  1. Esterase polymorphism marking cultivars of Manihot esculenta, Crantz

    Directory of Open Access Journals (Sweden)

    Adriana Gazoli Resende

    2004-07-01

    Full Text Available Esterase isozymes were used to detected substrate-preference polymorphism in twenty cultivars of Manihot esculenta, and to show cultivar-specific variation of this species. A relatively complex extraction solution of proteins from leaves was needed to show a larger number of esterase isozymes. Similarity between cultivars from six groups ranged from 51 to 96%. The cultivars identified by the same name seemed to be biochemically different regarding esterase isozymes. Esterase isozyme electrophoretic patterns could, therefore, be used to discriminate the cultivars identified by the same name, and to monitor the vegetative propagation of cultivars maintained in the germplasm collection. In breeding strategies, isoesterase analysis could be used to avoid intercrossing between the similar genotypes.Isoenzimas esterases foram usadas no presente estudo, para detectar polimorfismos específicos para diferentes substratos em vinte cultivares de Manihot esculenta, e para mostrar variações específicas de cultivares nesta espécie. Os diferentes cultivares de M. esculenta tem sido mantidos na coleção de germoplasma do Departamento de Agronomia da Universidade Estadual de Maringá (Maringá, PR, e foram provenientes de cultivares tradicionais coletados nas regiões sudoeste e noroeste do Estado. Foi necessário a utilização de uma solução de extração de proteínas relativamente mais complexa, para evidenciar um maior número de isoenzimas esterases. A similaridade entre os cultivares variou de 51 a 96%. Cultivares identificados pelo mesmo nome parecem ser bioquimicamente diferentes para as isoenzimas esterases. Os padrões eletroforéticos das isoesterases podem, portanto, serem usados para discriminar os cultivares que são identificados pelo mesmo nome, e para monitorar a propagação vegetativa dos cultivares mantidos na coleção de germoplasma. A análise das isoesterases pode também ser usada para evitar cruzamentos entre genótipos mais

  2. Repetibilidade de características agronômicas e número de cortes necessários para seleção de Urochloa ruziziensis Agronomic traits repeatability and number of cuts needed for selecting Urochloa ruziziensis

    Directory of Open Access Journals (Sweden)

    Fausto Souza Sobrinho

    2010-06-01

    Full Text Available O objetivo deste trabalho foi estimar a repetibilidade de características agronômicas e determinar a quantidade adequada de cortes para seleção de Urochloa ruziziensis. Foram avaliadas 118 progênies de meio-irmãos de U. ruziziensis, além das cultivares Basilisk (U. decumbens, Marandu (U. brizantha, Comum (U. ruziziensis e um acesso de Urochloa sp. como testemunhas. Utilizou-se o delineamento em blocos ao acaso, com duas repetições, parcelas de uma linha com 3,0 m e espaçamento de 1,0x0,5 m. Foram realizados sete cortes, em intervalos médios de 60 e 90 dias, nas épocas chuvosas e secas, respectivamente. Avaliaram-se: altura de planta, massa de matéria seca (MS, massa de matéria verde (MV e percentagem de matéria seca (PMS. A repetibilidade foi estimada pelos seguintes métodos: análise de variância; componentes principais, pela matriz de covariâncias e pela matriz de correlações; e análise estrutural pela matriz de correlações. As estimativas de repetibilidade variaram de 0,31-0,38 para altura de plantas, 0,31-0,43 para MV, 0,16-0,50 para PMS, e 0,23-0,43 para MS; com coeficientes de determinação entre 57-87%. O número de cortes necessários para estimar o valor real das características variou entre 7-8 para MV e altura de plantas, e 10-14 para MS e PMS, com coeficientes de determinação igual ou superior a 80%.The objective of this work was to estimate the repeatability of agronomic traits and to determine the appropriate number of cuts for selectig Urochloa ruziziensis. One hundred and eighteen progenies of half-sib U. ruziziensis and four checks, the cultivars Basilisk (U. decumbens, Marandu (U. brizantha, Comum (U. ruziziensis and one access Urochloa sp. were evaluated. A randomized complete block with two replications and plots in a 3.0-m line with 1.0x0.5-m spacing was used. Seven cuts were made at intervals of 60 and 90 days in wet and dry seasons, respectively. The evaluated characteristics were: plant height

  3. MGS Esmeralda: new large seed mungbean cultivar MGS Esmeralda: nova cultivar de mungo-verde de sementes grandes

    Directory of Open Access Journals (Sweden)

    Rogério Faria Vieira

    2008-06-01

    Full Text Available Mungbean cultivar MGS Esmeralda was developed by Asian Vegetable Research and Development Center (Shanhua, Taiwan, as a result of crossing between the lines VC 1973A and VC 2768A. In ten trials conducted in the State of Minas Gerais, Brazil, it produced 13.5% more grains than 'Ouro Verde MG-2' (control cultivar, and its highest yield was 2,550 kg ha-1. The cultivar MGS Esmeralda is more susceptible to lodging, and its pods mature more uniformly than Ouro Verde MG-2 pods. One hundred-seed mass of 'MGS Esmeralda' ranged between 5.5 and 6.8 g. Both cultivars are susceptible to powdery mildew and cercospora leaf spot.A cultivar de mungo-verde MGS Esmeralda foi criada pelo Asian Vegetable Research and Development Center, localizado em Shanhua, Formosa. Ela é resultado do cruzamento entre as linhagens VC 1973A e VC 2768A. Em dez ensaios conduzidos em Minas Gerais, ela produziu 13,5% mais grãos do que a cultivar Ouro Verde MG-2 (testemunha, e sua produtividade mais alta foi 2.550 kg ha-1. A cultivar MGS Esmeralda é mais suscetível ao acamamento do que a Ouro Verde MG-2, mas suas vagens amadurecem mais uniformemente. A massa de 100 grãos da 'MGS Esmeralda' varia de 5,5 a 6,8 g. Ambas as cultivares são suscetíveis ao oídio e à cercosporiose.

  4. Sensitivity of tomato cultivars to sulfur dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Howe, T.K.; Woltz, S.S.

    1982-04-01

    The sensitivity of 26 cultivars of tomato (Lycopersicon esculentum Mill.) were compared at 2 concentrations of SO/sub 2/in specially designed exposure greenhouses. Cultivars studied included fresh market, processing, and specialty types. Insensitive and sensitive cultivars were identified by assessment of acute SO/sub 2/-induced foliar necrosis. Cultivars found to be insensitive to SO/sub 2/ included: 'Ace', 'Bonanza', 'Heinz 1350', 'Tarquinia Tondino', and 'VF 145-B 7879'. Cultivars found to be sensitive to SO/sub 2/ included: 'Bellarina', 'Chico III', 'Flora-Dade', 'Red Cherry Large' 'Sub-Arctic Delight', and 'Vetomold. 10 figures, 1 table.

  5. Effect of application timing and grass height on the nitrogen fertilizer replacement value of cattle slurry applied with a trailing-shoe application system

    NARCIS (Netherlands)

    Lalor, S.T.J.; Schroder, J.J.; Lantinga, E.A.; Schulte, R.P.O.

    2014-01-01

    This study investigated the effect of using a trailing-shoe system to apply cattle slurry, under different conditions of grass height (low [LG]: freshly cut sward [4–5 cm height] vs. high [HG]: application delayed by 7–19 d and applied to taller grass sward [4–11 cm] height) and month of application

  6. Utilization of potatoes for life support in space. V. Evaluation of cultivars in response to continuous light and high temperature

    Science.gov (United States)

    Tibbitts, T. W.; Cao, W.; Bennett, S. M.

    1992-01-01

    Twenty-four potato (Solanum tuberosum L.) cultivars from different regions of the world were evaluated in terms of their responses to continuous light (24 h photoperiod) and to high temperature (30 C) in two separate experiments under controlled environments. In each experiment, a first evaluation of the cultivars was made at day 35 after transplanting, at which time 12 cultivars exhibiting best growth and tuber initiation were selected. A final evaluation of the 12 cultivars was made after an additional 21 days of growth, at which time plant height, total dry weight, tuber dry weight, and tuber number were determined. In the continuous light evaluation, the 12 selected cultivars were Alaska 114, Atlantic, Bintje, Denali, Desiree, Haig, New York 81, Ottar, Rutt, Snogg, Snowchip, and Troll. In the high temperature evaluation, the 12 selected cultivars were Alpha, Atlantic, Bake King, Denali, Desiree, Haig, Kennebec, Norland, Russet Burbank, Rutt, Superior, and Troll. Among the cultivars selected under continuous irradiation, Desiree, Ottar, Haig, Rutt, Denali and Alaska showed the best potential for high productivity whereas New York 81 and Bintje showed the least production capability. Among the cultivars selected under high temperature, Rutt, Haig, Troll and Bake King had best performance whereas Atlantic, Alpha, Kennebec and Russet Burbank exhibited the least production potential. Thus, Haig and Rutt were the two cultivars that performed well under continuous irradiation and high temperature conditions, and could have maximum potential for adaptation to varying stress environments. These two cultivars may have the best potential for use in future space farming in which continuous light and/or high temperature conditions may exist. However, cultivar responses under combined conditions of continuous light and high temperature remains for further validation.

  7. Inner tubes cutting method by electrical arc saw

    International Nuclear Information System (INIS)

    Thome, P.

    1990-01-01

    The research program deals on the definition of tools used for dismantling steam generator tubes bundle of PWR and on tool used for cutting pipes of great diameter by using the process of cutting by electrical arc saw. The remote tools are used for cutting by the interior pipes of contamined circuits [fr

  8. SELECTIVITY OF CYANAZINE AND LINURON ON SEVERAL CULTIVARS OF Pisum sativum IN THE ‘CERRADO’ REGION SELETIVIDADE DE CYANAZINE E LINURON EM CULTIVARES DE ERVILHA (Pisum sativum L. NA REGIÃO DOS CERRADOS

    Directory of Open Access Journals (Sweden)

    Jácomo Divino Borges

    2007-09-01

    Full Text Available

    The herbicides cyanazine and linuron were tested on the pea cultivars Marina, Mikado and Triofin, in Goiânia, State of Goiás, from May to August 1989. The number of pods/plant, grains/pod, weight of 100 grains and yield of grains were not affected by the herbicides used. There was no interaction effect of herbicides and cultivars. Only a slight toxic effect on the foliage of young plants of all cultivars was caused by linuron and on young plants of Mikado by cyanazine at 1,250 g.a.i./ha. In most treatments, Marina and Mikado proved to be more productive than Triofin.

    Foi instalado em Goiânia, Estado de Goiás, no período de maio a agosto de 1989, um ensaio para verificar a seletividade dos herbicidas cyanazine e linuron para as cultivares de ervilha Marina, Mikado e Triofin. Linuron provocou uma fraca fitotoxicidade em todas as cultivares, enquanto que cyanazine a 1.250 g.i.a./ha foi levemente fitotóxico apenas para a cultivar Mikado. O número de vagens por planta e grãos por vagem, peso de 100 grãos secos e a produção de grãos não foram afetados pela ação dos herbicidas. Não houve interação herbicidas versus cultivares. Na maioria dos tratamentos, Marina e Mikado mostraram-se mais produtivas que Triofin.

  9. High-speed fiber laser cutting of thick stainless steel for dismantling tasks

    Science.gov (United States)

    Shin, Jae Sung; Oh, Seong Yong; Park, Hyunmin; Chung, Chin-Man; Seon, Sangwoo; Kim, Taek-Soo; Lee, Lim; Choi, Byung-Seon; Moon, Jei-Kwon

    2017-09-01

    A high-speed fiber laser cutting technology of thick steels for dismantling tasks was achieved using a 6-kW fiber laser system. At first, a new cutting head for efficient cutting of thick steels was developed, which was composed by a collimator with a focal length of 160 mm and mirror-type focusing objects with a long focal length of 600 mm. The long focal length of the focusing object made it possible for the beam size to be small through the thick cutting material and the cutting efficiency was expected to increase compared with the short focal length. In addition, folding the beam facilitated the compact cutting head with a size of 160 mm (width) × 80 mm (height) × 640 mm (length) and a weight of 6.9 kg. In the cutting experiment, the laser beam was delivered to the cutting head by a 25-m long process fiber with a core diameter of 100 μm. The cutting performances were studied against the thicknesses of stainless steel plates. A maximum cutting speed of 72 mm/min was obtained for the 60-mm thick stainless steel plate cutting and the cut specimen showed an excellent kerf shape and a narrow kerf width. To the best of our knowledge, this cutting speed was higher than other previously reported results when cutting with a 6-kW laser power.

  10. Growth analysis of UV-B-irradiated cucumber seedlings as influenced by photosynthetic photon flux source and cultivar

    International Nuclear Information System (INIS)

    Krizek, D.T.; Mirecki, R.M.; Kramer, G.F.

    1994-01-01

    A growth analysis was made of ultraviolet-B (UV-B)-sensitive (Poinsett) and insensitive (Ashley) cultivars of Cucuumis satives L. grown in growth chambers at 600 μmol m −2 s −1 of photosynthetic photon flux (PPF) provided by red- and far-red-deficient metal halide (MH) or blue- and UV-A-deficient high pressure sodium/deluxe f HPS/DX) lamps. Plants were irradiated 6 h daily with 0.2 f-UV-B) or 18.2 C+UV-B) kJ m −2 day −1 of biologically effective UV-B for 8 or 15 days from time of seeding. In general, plants given supplemental UV-B for 15 days showed lower leaf area ratio (LARs, and higher specific leaf mass (SLM) mean relative growth rate (MRGR) and net assimilation rate (NAR) than that of control plants, but they showed no difference in leaf mass ratio (LMR), Plants grown under HPS/DX lamps vs MH lamps showed higher SLM and NAR. lower LAR and LMR. hut no difference in MRGR. LMR was the only growth parameter affected by cultivar: at 15 days, it was slightly greater in Poinsett than in Ashley. There were no interactive effects of UV-B. PPF source or cultivar on any of the growth parameters determined, indicating that the choice of either HPS/DX or MH lamps should not affect growth response to UV-B radiation. This was true even though leaves of UV-B-irradiated plants grown under HPS/DX lamps have been shown to have greater chlorosis than those grown under MH lamps. (author)

  11. Effects of salt stress on growth and physiological characteristics of pomegranate (Punica granatum L.) cuttings

    International Nuclear Information System (INIS)

    Liu, C.; Yan, M.; Huang, X.; Yuan, Z.

    2018-01-01

    With 2-years-old pomegranate (Punica granatum L.) cv. 'Tunisia' cuttings as materials, the growth properties, salt injury indexes, leaf membrane permeability, Chlorophyll (Chl) content, malondialdehyde (MDA) content, proline and soluble protein content, and activities of superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD) were investigated under different NaCl concentrations (0, 0.1, 0.2, 0.3, 0.4, 0.5, and 0.6%, w/w) treatments after 7, 21 and 35 days. The results showed that: the height and ground diameter of pomegranate were increased at low salinity (0.1%), and they were significantly inhibited at high salinity (= 0.5%). With increased NaCl concentrations, Chl a, Chl b, and Chl (a + b) contents were decreased and chlorophyll a/b were increased. Leaf membrane permeability was seriously enhanced and the amount of MDA was markedly increased at high salinity (= 0.5%). The proline and soluble protein were significantly accumulated and quickly responded to NaCl stress. The activities of SOD, CAT, and POD showed a trend of first rising and then decreasing, with the maximum appearing at 0.4% salinity. In addition, the adverse effects on these physiological indexes aggravated gradually over time. Our study suggested that pomegranate 'Tunisi' was a moderately salt tolerant cultivar (0.4% NaCl) with a promoting effect on the growth below 0.1% salinity. This cultivar presents a mechanism of alleviating the detrimental effects of salt stress through improving the proline content, soluble protein content and the activities of antioxidant enzymes. But the protections of antioxidant enzymes are in a limited range of salinity. (author)

  12. Can simulation models help design rice cultivars that are more competitive against weeds?

    NARCIS (Netherlands)

    Bastiaans, L.; Kropff, M.J.; Kempuchetty, N.; Rajan, A.; Migo, T.R.

    1997-01-01

    Differences in competitive ability between rice cultivars IR8 and Mahsuri, grown in well-fertilised irrigated conditions, were analysed by means of a mechanistic simulation model (INTERCOM) for crop-weed interaction. The analysis revealed that the greater competitive ability of Mahsuri was due

  13. NS Pudarka: A new winter wheat cultivar

    Directory of Open Access Journals (Sweden)

    Hristov Nikola

    2014-01-01

    Full Text Available The high-yielding, medium late winter wheat cultivar NS Pudarka was developed by crossing genetic divergent parents: line NMNH-07 and cv. NS 40S and Simonida. In cultivar NS Pudarka genes responsible for high yield potential, very good technological quality, resistance to lodging, low temperature and diseases, were successfully combined. It was registered by Ministry of agriculture, forestry and water management of Serbia Republic in 2013. This cultivar has wide adaptability and stability of yield that enable growing in different environments with optimal agricultural practice. On the base of technological quality this cultivar belongs to the second quality class, A2 farinograph subgroup and second technological group.

  14. Possibility in application of electron beam irradiation to plant quarantine of cut flowers

    International Nuclear Information System (INIS)

    Tanabe, Kazuo

    1994-01-01

    For the purpose of developing new quarantine procedure alternative to fumigation, electron beam irradiation was examined in the disinfestation of arthroped pests that infest cut flowers. Immature and adult two-spotted spider mites, Tetranychus urticae, which is a typical pest in horticulture due to high fertility, parthenogenesis and chemical resistance, were irradiated at a Van de graaf electron accelerator (2.5 MeV) at 0.2 - 1.4 kGy. They decreased radiosensitivity with aging. Female was much more tolerant than male throughout their life. Irradiation controlled the fertility of both sexes, and also feeding and behavioral activities. Cut flowers irradiated with the Dynamitron accelerator (5 MeV) showed various responses according to species, cultivars and tissues of plants. Carnations, tulips and gladioluses were tolerant in disinfesting or sterilizing, but some cultivars of chrysanthemum and rose showed the symptom of injury, in which flowering was delayed at low dose, and the failure of flowering and the chlorosis of leaves occurred at high dose. Floral organs were much more sensitive to radiation than others. Sensitive plants also showed the reduced production of ethylene. (K.I.)

  15. Present and future of cutting equipment; Setsudan kiki no genjo to tenbo

    Energy Technology Data Exchange (ETDEWEB)

    Nakagawa, K. [Koike Sanso Kogyo Co. Ltd., Tokyo (Japan)

    1998-04-01

    This paper describes thermal cutting equipment. Thermal cutting equipment is classified into gas, plasma and laser cutting equipment. Based on the level of automation, the gas cutting equipment has been developed in the order of manual, automatic, eye-tracer, and NC cutters. For recent eye-tracer, paper pattern is inputted in a computer and repeatedly traced. For NC cutting equipment, automatic gas flow rate setting device and sensor for tracing nozzle height are installed. Oxygen plasma cutter is used for cutting soft steel materials. Simplified systems with current below 100 A are mainly used. High-speed cutting is conducted by NC control. Problems of life-time of electrode tips, load of workers, cutting performance, and penetration at corners have been solved. For laser cutter, NC control is also adopted. Since there are no short life-time consumables and conditions can be automatically set, the laser cutter has been put into practice as unmanned equipment. Problems of cutting speed and processing speed have been solved. Gas cutting with multi-blowpipes and unmanned operation of laser cutting are most useful for reducing the cost. 2 figs., 3 tabs.

  16. Avaliação da competição intergenotipica em misturas de cultivares de soja Evaluation o f intergenotypic competition in soybean cultivars blends

    Directory of Open Access Journals (Sweden)

    Dilson Antonio Bisognin

    1995-01-01

    Full Text Available Para avaliar os efeitos da competição intergenotípica em misturas de cultivares de soja - Glycine max (L. Merrill - foi conduzido um experimento em Capão do Leão, RS, no ano agrícola de 1989/90. Os tratamentos foram os estandes puros de IAS 5, Ivorá, Bragg, BR 8 - Pelotas e Ivaí e as combinações de Bragg com os demais cultivares, nas proporções de 20, 35, 50, 65 e 80%. O delineamento experimental foi o látice parcialmente balanceado 5x5, com quatro repetições. A competição intergenotípica foi quantificada pela variação percentual = 100 (PM - PEP/ PEP, onde PM é a média do caráter em mistura e PEP é a média do caráter em estande puro. As misturas produziram, em média, 3,8% mais que a média dos componentes em estande puro. Duas misturas, IAS 5 + Bragg e BR 8-Pelotas + Bragg, proporcionaram acréscimos no rendimento em todas as proporções de misturas. Concluiu-se que a competição intergenotípica pode ser utilizada no melhoramento da soja, visando a obtenção de misturas com rendimento e desempenho superior. Respostas diferenciadas à competição intergenotípica foram observadas em diferentes misturas e proporções e, proporção e características contrastantes entre os cultivares como capacidade de ramificação, altura de planta, ciclo de maturação e período de florescimento devem ser consideradas para a formação de misturas superiores.Intergenotypic competition effects on soybean -Glycine max (L. Merrill - cultivar blends was evaluated in an experiment carried out along the 1989/90 crop season, in Capão do Leão county, RS. Five cultivars, IAS 5, Ivorá, Bragg, Ivaí and BR 8-Pelotas in pure stand and the blends of Bragg with every cultivar, in the proportions of 20, 35, 50, 65 and 80%, were alocated to a partially balanced 5 x 5 lattice design with four repetitions. Intergenotypic competition was quantified by percent vanation 1 (PM - PEP/PEP, where PM stands for the vanable mean in the blend and PEP

  17. Effect of cutting parameters on workpiece and tool properties during drilling of Ti-6Al-4V

    International Nuclear Information System (INIS)

    Celik, Yahya Hisman; Yildiz, Hakan

    2016-01-01

    The main aim of machining is to provide the dimensional preciseness together with surface and geometric quality of the workpiece to be manufactured within the desired limits. Today, it is quite hard to drill widely utilized Ti-6Al-4 V alloys owing to their superior features. Therefore, in this study, the effects of temperature, chip formation, thrust forces, surface roughness, burr heights, hole diameter deviations and tool wears on the drilling of Ti-6Al-4 V were investigated under dry cutting conditions with different cutting speeds and feed rates by using tungsten carbide (WC) and high speed steel (HSS) drills. Moreover, the mathematical modeling of thrust force, surface roughness, burr height and tool wear were formed using Matlab. It was found that the feed rate, cutting speed and type of drill have a major effect on the thrust forces, surface roughness, burr heights, hole diameter deviations and tool wears. Optimum results in the Ti-6Al-4 V alloy drilling process were obtained using the WC drill.

  18. Effect of cutting parameters on workpiece and tool properties during drilling of Ti-6Al-4V

    Energy Technology Data Exchange (ETDEWEB)

    Celik, Yahya Hisman; Yildiz, Hakan [Batman Univ. (Turkey). Dept. of Mechanical Engineering; Oezek, Cebeli [Firat Univ., Elazig (Turkey)

    2016-08-01

    The main aim of machining is to provide the dimensional preciseness together with surface and geometric quality of the workpiece to be manufactured within the desired limits. Today, it is quite hard to drill widely utilized Ti-6Al-4 V alloys owing to their superior features. Therefore, in this study, the effects of temperature, chip formation, thrust forces, surface roughness, burr heights, hole diameter deviations and tool wears on the drilling of Ti-6Al-4 V were investigated under dry cutting conditions with different cutting speeds and feed rates by using tungsten carbide (WC) and high speed steel (HSS) drills. Moreover, the mathematical modeling of thrust force, surface roughness, burr height and tool wear were formed using Matlab. It was found that the feed rate, cutting speed and type of drill have a major effect on the thrust forces, surface roughness, burr heights, hole diameter deviations and tool wears. Optimum results in the Ti-6Al-4 V alloy drilling process were obtained using the WC drill.

  19. Man bhawan - new chrysanthemum cultivar induced by gamma irradiation

    International Nuclear Information System (INIS)

    Datta, S.K.

    1987-01-01

    Attempts were made to find out the biochemical difference between two gamma ray induced chrysanthemum cultivars, 'Flirt' and 'Man Bhawan' by thin layer chromatographic and spectrophotometric analysis of pigments. The analysis were done from florets extracts of original cv., 'Flirt' and mutant 'Man Bhawan' at full bloom stage and also at fading of 'Man Bhawan'. (author)

  20. Inheritance of culm height and grain yield in durum wheat

    International Nuclear Information System (INIS)

    Filev, K.

    1984-01-01

    Results from a study of GA sensitive and GA insensitive durum wheat mutants and cultivars in relation with their culm height and 1000 grain weight are presented. With increasing culm height, the GA response also increased. A positive correlation between plant height and GA response was found. Crosses were made between durum wheats and the F 1 and F 2 progenies were analysed. A different inheritance in F 1 and segregation in F 2 was obtained in crosses of a semi-dwarf, GA insensitive [1] line with GA sensitive (S) lines differing in height, medium (93.2cm) and tall (133.5cm). In a reciprocal cross, semi-dwarf - I with medium - S, the semi-dwarf type was dominant in F 1 , suggesting that their semi-dwarfing genes were not allelic. When the semi-dwarf - I and tall - S were crossed an intermediate inheritance in F 1 was observed. In the F 2 generation from crosses semi-dwarf - I with medium - S with semi-dwarf - I, a phenotypic dihybred segregation 9:3:3:1 was observed. In crosses semi-dwarf - I with tall - S different variation curves were obtained. Semi-dwarfs with high productivity were observed in F 2 , a fact indicating that lodging resistant lines with high yields could be selected. (author)

  1. Characterisation of aerosols produced by laser cutting

    International Nuclear Information System (INIS)

    Fauvel, S.; Pilot, G.; Dinechin, G. de; Gosse, X.; Arnaud, P.

    2007-01-01

    Powerful lasers represent a promising alternative solution to traditional cutting processes used in dismantling nuclear equipments. The use of optical fibers has an unquestionable advantage when dealing with airtight workshops. A study funded by COGEMA Marcoule was undertaken by IRSN/SERAC in collaboration with GIP/GERAILP in order to characterise the aerosols emitted by the cutting of evaporators elements with a 4 kW continuous wave Nd:YAG laser. For this study, laser cutting has been carried out in a tight room of 35 m 3 connected to a particle sampling pipe. Iso-kinetic samplers allowed the measurement of the aerosol concentration. A diffusional and inertial spectrometer (SDI 2001) - an Andersen impinger coupled to a diffusion battery - provided the size distribution. An electrostatic filter used upstream a HEPA filter, itself placed before the extractor fan, collected the majority of the emitted aerosol. Its efficiency was measured and controlled throughout the experiments. The results show the influence of the cutting conditions on the characteristics of the aerosol, and allow a comparison with other cutting tools. (authors)

  2. Responses of Seed Yield, Yield Components and Some Morpho-physiological Traits of Wheat Cultivars (Triticum aestivum to the Application Methods of Fulzyme Biofertilizer

    Directory of Open Access Journals (Sweden)

    A. Eslami

    2014-10-01

    Full Text Available To study the effect of application methods of Fulzym biofertilizer (containing Bacillus subtilis on yield, yield components and some morpho-physiological characteristics of four cultivars wheat, an experiment was conducted in field of Astan Quds Razavi in 2010- 2011. The experiment performed was in split plot based on randomized complete block design with three replications. Four wheat cultivars (Falat, Pishtaz, Bahar and Toos were assigned to main plots and four biofertilizer application methods (as seed inoculation, using in irrigation water, seed inoculation and irrigation and control to sub plots. Results indicated that Falat had the lowest plant height (61.5 cm than other varieties. Plant height of Toos and Pishtaz were about 14.5 percent higher than Falat. Application methods of Fulzym increased chlorophyll content and plant height. Highest chlorophyll contents were obtained when seeds inoculated by Fulzyme and used through irrigation. At the end of growing season, it was found that chlorophyll content of Falat and Toos flag leaves were higher than Pishtaz and Bahar. It was also revealed that Bahar when Fulzyme was used showed a better response to treatments than other varieties as for as biological and seed yields were concerned. Highest seed yield produced by irrigation and combination of seed inoculation and irrigation (9063 and 8609 kg.ha-1 and lowest seed yield (5858 kg.ha-1 to Falat in the control treatment.

  3. Structural and productive characteristics of Marandu and Xaraés grasses fertilized at different times after harvesting

    Directory of Open Access Journals (Sweden)

    Rosana Cristina Pereira

    2012-03-01

    Full Text Available The objective of this study was to assess the effect of applying N and K2O at different times after harvest on the structure and production characteristics of Marandu and Xaraés cultivars of Brachiaria brizantha. Two greenhouse 4 × 2 factorial experiments using a randomized block design with eight treatments and four replicates were carried out. In experiment 1, the plants in pots were fertilized weekly with 50 mg/dm³ of N and K2O until a week before a uniformity cut, for a total of four applications. After cutting, plants were fertilized with 50 mg/dm³ of N and K2O at 0, 3, 6, and 9 days. Cultivars were evaluated after 44 days of regrowth. In experiment 2, a single 50 mg/dm³ dose of N and K2O was applied a week before the uniformity cut, and 100 mg/dm³ of N and K2O were applied at 0, 4, 8, and 12 days after cutting; cultivars were evaluated after 39 days of regrowth. In experiment 1, the leaf/stem ratio and dry matter yield were influenced by the time at which fertilizers were applied. In the second experiment, the total number of leaves, expanded leaves, dead leaves, and the leaf lamina accumulated length and dry matter production were influenced by the time at which fertilizers were applied. Marandugrass had more leaves and tillers than cv. Xaraés, which, in turn, had greater height, dry matter yield and regrowth vigor. Applying nitrogen and potassium fertilizer immediately after cutting improves the structural characteristics, while the dry matter yield is maximized by applying fertilizers immediately after cutting by using lower doses of N, or at 4.5 days after cutting by using higher doses of N.

  4. Genetic variations between two ecotypes of Egyptian clover by inter ...

    African Journals Online (AJOL)

    Aghomotsegin

    2015-06-10

    Jun 10, 2015 ... Four Egyptian clover (Trifolium alexandrinum L) cultivars representing two ecotypes were used in the present study. Fahl cultivar is prevalent in whole Egypt and is good for single cut as it has poor regeneration ability, whereas Serw1, Giza6 and Gemmiza1 give 5-6 cuts of good fodder. Techniques based ...

  5. Effects of cutting time, stump height, and herbicide application on ash (Fraxinus spp.) stump sprouting and colonization by emerald ash borer (Agrilus planipennis)

    Science.gov (United States)

    Toby R. Petrice; Robert A. Haack

    2011-01-01

    Efforts to eradicate or slow the spread of emerald ash borer (EAB) (Agrilus planipennis Fairmaire [Coleoptera: Buprestidae]) include cutting infested and nearby uninfested ash (Fraxinus spp.) trees. However, ash trees readily sprout after they have been cut, providing potential host material for EAB. In 2004-2005, we conducted...

  6. Determining the Pollinizer for Pecan Cultivars

    Directory of Open Access Journals (Sweden)

    Fereidoon Ajamgard

    2017-05-01

    Full Text Available This study was conducted to determine the best pollinizer for five selected pecan cultivars in southwest of Iran at Safiabad Agricultural Research Center in 2014-2015. The cultivars included: 'GraTex', '10J', 'Wichita 6J', 'GraKing', 'Choctaw' as pollinated cultivars (♀ and 'GraTex', 'Peruque', 'Comanche 4M', '10J', 'Wichita 6J', 'Mohawk', 'Mahan', 'Stuart 2J', '3J', 'Stuart 4J', 'GraKing', 'Choctaw', 'Apache', '6M', 'Wichita 7J' and 'Comanche 5M.' as pollinizer cultivars (♂. In the first step, a pollination chart of cultivars was determined in two years. The pollination chart of cultivars showed that all the cultivars investigated during this study were dichogamous and also protogynous except for the 'Peruque'. ‘GraKing’ had the longest duration of shedding pollen. Pollination chart showed that 'Peruque', ‘GraKing’, and 'Stuart 2J' had flowering overlap with the selected cultivars. Pollen germination test showed that the germination ability was different among the cultivars. It was 45% for 'GraKing' and 35% for 'Peruque', which were both recommended as pollinizers in this study. '6M', 'GraTex' and 'Stuart 4J' cultivars had the highest pollen germination percentage of 65%, 60% and 60%, respectively. The results of controlled pollinationtest showed that different pollen sources had no significant effect on nuts per cluster but self-pollinated all of the cultivars significantly reduced fruit set in first and second years. Based on the present research, pollination in pecan orchard was necessary for adequate yield. Also, 'Peruque', 'GraKing' and 'Stuart 2J' were the best pollinizers for five selected cultivars in southwest of Iran.

  7. (Lilium) cultivar

    African Journals Online (AJOL)

    Yomi

    2012-08-30

    Aug 30, 2012 ... 2National Engineering Research Center for Floriculture, Beijing, China. Accepted 6 August, 2012 ... hybrids lily cultivar 'eyeliner' was selected as the materials. By using the ... of sterilization was not ideal which led to higher.

  8. Identification of Ppd-B1 alleles in common wheat cultivars by CAPS marker.

    Science.gov (United States)

    Okoń, S; Kowalczyk, K; Miazga, D

    2012-05-01

    Photoperiod response is a major determinant of the duration of growth stages in common wheat. In common wheat, many genes play a role in determining flowering time, but the Ppd genes located on the homoeologous group 2 play a major role. Of these Ppd-B1 is located on the short arm of 2B. In 107 common wheat cultivars grown in Poland and neighboring countries, the identification of Ppd-B1 alleles using in-del analysis by using a CAPS markers was investigated. 87 cultivars were shown to carry dominant Ppd-B1 alleles. This shows that Ppd-B1 alleles is have been widely used in common wheat breeding programme in these countries. Recessive ppd-B1 alleles were found only in 20 cultivars (12 Polish, 5 former Soviet Union, 2 German, 1 Swedish).

  9. Induction of in vivo mutation in chrysanthemum (Dendranthema grandiflora Tzvelev) cv. Pink Repin breeding

    International Nuclear Information System (INIS)

    Neto, Augusto Tulmann; Latado, Rodrigo Rocha

    1997-01-01

    Mutation induction was used with the objective of obtaining mutants for flower colour of chrysanthemum, cv. Repin (pink colour). Rooted cuttings were irradiated with 20 Gy of gamma rays and before the selection the cutting back method was used to advance the generations. The frequency of colour mutants observed was 5.8%. Among the mutants obtainedthe white and dark-pink-coloured ones were evaluated in yield trial and post-harvest. The results indicated that these mutants mantained the same agronomical characteristics showed by the control, with the exception of plant height in the white mutant that was shorter. Due to commercial interest of the producers, these mutants were multiplied and released as new cultivars. The white flower colour mutant was named Cristiane and the dark-pink, Ingrid. This was the first example of cultivars from an ornamental plant released by mutation breeding in Brazil. (author)

  10. Rooting of stem cuttings of ixora

    Directory of Open Access Journals (Sweden)

    Aline De Souza Silva

    2015-08-01

    Full Text Available The ixora is ornamental plant widely used in landscaping. In order to maximize the propagation of cuts, we evaluated the concentrations of auxin (indolbutiric acid and the presence of leaves on the rooting in cuts of Ixora coccinea L. The experiment was conducted in randomized block design, in factorial design 3x4, with three types of cuts (without leaf, with two or four leaves, four concentrations of indolbutiric acid (0, 1000, 2000 and 4000 mg L-1, with four replications and 10 cuts in each experimental unit. After 53 days of implantation the experiment, evaluated the survival(%, rooting(%, sprouting(%, formation of callus(%, number, length and biomass of roots formed. The interaction of the type of cuts with concentrations of auxin was not significant for any of the variables analyzed. The survival of cuttings was not influenced by the treatments. Cuts with two or four leaves presented rooting and length of roots above the cuttings without leaves. The application of auxin does not substitute the presence of leaf in cuts of ixora in vegetative propagation. The vegetative propagation by cut of ixora can be made without application of auxin, and the leaves must be maintained in the cuttings.

  11. Cadmium accumulation in different rice cultivars and screening for pollution-safe cultivars of rice.

    Science.gov (United States)

    Yu, Hui; Wang, Junli; Fang, Wei; Yuan, Jiangang; Yang, Zhongyi

    2006-11-01

    Large areas of contaminated land are being used for agricultural production in some countries due to the high demand for food. To minimize the influx of pollutants to the human food chain through consumption of agricultural products, we propose the concept of pollution-safe cultivars (PSCs), i.e. cultivars whose edible parts accumulate a specific pollutant at a level low enough for safe consumption, even when grown in contaminated soil. We tested the feasibility of the PSC concept by growing 43 cultivars of paddy rice (Oryza sativa L., including 20 normal and 23 hybrid cultivars) under a high (75.69-77.55 mg kg(-1)) and a low (1.75-1.85 mg kg(-1)) cadmium (Cd) exposure. These pot experiments took place in the spring and summer of 2004. At the low level of Cd exposure, 30 out of the 43 tested cultivars were found to be Cd-PSCs. Grain Cd concentrations were highly correlated (price grain is genotype-dependent and that the selection of PSCs is possible, at least at a certain level of soil contamination. No Cd-PSCs were found under the high level of Cd exposure. Yield was enhanced in some cultivars and depressed in others in response to elevated soil Cd, indicating that farmers cannot rely on yield depression as an indicator of toxicity of the grains. It is therefore important and feasible to screen for PSCs and to establish PSC breeding programs to effectively and efficiently reduce the risk of human exposure to soil pollutants, such as Cd, through crop consumption.

  12. Variations in cadmium accumulation among Chinese cabbage cultivars and screening for Cd-safe cultivars

    International Nuclear Information System (INIS)

    Liu Weitao; Zhou Qixing; An Jing; Sun Yuebing; Liu Rui

    2010-01-01

    Variations in cadmium accumulation and translocation among 40 Chinese cabbage cultivars were studied to identify and screen out Cd-safe cultivars (CSCs), i.e. cultivars with low enough accumulation of Cd in their edible parts even when grown in contaminated soils. It was observed in the pot-culture experiment that there was a significant difference (p < 0.05) in shoot Cd concentrations under three Cd treatments (1.0, 2.5 and 5.0 mg/kg), with corresponding average values 0.88, 4.45 and 7.76 mg/kg, respectively. Shoot Cd concentrations in 16 cabbage cultivars were lower than 0.50 mg/kg. The translocation factors (TFs) and the extraction factors (EFs) in five cabbage cultivars were lower than 1.0 in the pot-culture experiment. The field-culture experiment further validated that New Beijing 3 and Fengyuanxin 3 could be considered as CSCs. In particular, the two cultivars can be cultivated in low to moderate Cd-contaminated soils (Cd concentration <1.25 mg/kg) to minimize the Cd accumulation in the food.

  13. Differences in Arbuscular Mycorrhizal Fungi among Three Coffee Cultivars in Puerto Rico

    OpenAIRE

    Lebrón, Ligia; Lodge, D. Jean; Bayman, Paul

    2012-01-01

    Mycorrhizal symbiosis is important for growth of coffee (Coffea arabica), but differences among coffee cultivars in response to mycorrhizal interactions have not been studied. We compared arbuscular mycorrhizal (AM) extraradical hyphae in the soil and diversity of AM fungi among three coffee cultivars, Caturra, Pacas, and Borbón, at three farms in Puerto Rico. Caturra had significantly lower total extraradical AM hyphal length than Pacas and Borbón at all locations. P content did not differ a...

  14. Physiological Responses to Cadmium, Nickel and their Interaction in the Seedlings of Two Maize (Zea mays L. Cultivars

    Directory of Open Access Journals (Sweden)

    Pavlovkin Ján

    2016-12-01

    Full Text Available In the leaves of maize seedlings, cultivars Premia and Blitz, the relatively low 2 μmol/L concentration of cadmium (Cd, nickel (Ni, or both metals acting simultaneously (Cd +Ni for 72 h, induced a significant metal accumulation, decrease in total K+ content, reduction of light-induced membrane electrical potential (EM repolarisation in mesophyll cells and changes of ascorbic acid (AsA, dehydroascorbic acid (DHA and glutathione (GSH content. Shoot growth and the values of resting EM did not change significantly. Increased K+ leakage, from the leaves, and lipid peroxidation accompanied by increase of TBA-reactive substances (TBARS were found only in cv. Blitz exposed to Cd + Ni. This indicates a capability of high leaf-cell anti-oxidant pool to ameliorate the toxic effects on plasma membrane of single ions in both cultivars, and of Cd + Ni only in cv. Premia. The decreased total content of K+ in leaves in all variants indicated repressing the K+ uptake and/or distribution to the shoots. Under anoxia, the magnitude of the repolarisation obtained after switching on the light was smaller in Cd-treated cultivar Premia than in the controls, and this also occurred in Ni- and Cd + Ni-treated cultivar Blitz.

  15. sativa L.) Cultivars

    African Journals Online (AJOL)

    Abstract. Ten rice cultivars from the International Rice Germplasm Centre originating from Bangladesh were analysedfor the~r genetics of resistance to bacterial blight. The test cultivars were selected on the basis of their high level ofresistance to races IV & VI ofXanthomonas oryzae pv. oryzae. The mode ofinheri- tance was ...

  16. Flower opening and vase life of gladiolus cultivars: the sensitivity to ethylene and the carbohydrate content

    Directory of Open Access Journals (Sweden)

    Lucas Cavalcante da Costa

    2016-08-01

    Full Text Available Vase life is one of the most important characteristics in the quality of cut flowers. The carbohydrate content of petals from each cultivar can be a decisive factor to vase life of gladiolus flowers. Despite exposure to ethylene does not affect the life of open florets of gladiolus flowers, it may reduce the flower’s commercial life due the occurrence of flower buds abortion. This study thus aimed to evaluate the flower opening and the vase life of gladiolus flowers according to ethylene sensitivity and carbohydrate content of each cultivar. The gladiolus cultivars used in Experiment I were  ‘Amsterdam’, ‘Blue Frost’, ‘Gold Field’, ‘Green Star’, ‘Jester’, ‘Lavender’, ‘Red Beauty’, ‘Rose Supreme’, ‘Traderhorn’, and ‘Verônica’. Stems were stored in airtight chambers and exposed to the ethylene concentrations of 0, 0.1, 1.0, 10, 100, and 1000 μL L−1 for 24 h. Subsequently, flower stem were placed in a test tube with distilled water when were evaluated for percentage of flower opening and vase life. In Experiment II, three cultivars (‘Amsterdam’, ‘Red Beauty’, and ‘Verônica’ were chosen based on the lowest, medium, and highest vase life in Experiment I, respectively. Total soluble sugars, reducing sugars, and starch contents were evaluated in five flower developmental stages. No effect of ethylene on the flower opening or alterations in flower opening between cultivars. The vase life of gladiolus flowers differed between cultivars regardless of ethylene action. ‘Verônica’ and ‘Amsterdam’, which had the highest and lowest vase life, respectively, differed as to the total soluble sugar content. Ethylene does not influence the flower opening or vase life of the gladiolus cultivars studied. In these cultivars, the maintenance of flower opening is attributed to total soluble sugars content, which, in turn, is a major determinant of the vase life.

  17. Morphological, mechanical and antioxidant properties of Portuguese almond cultivars

    DEFF Research Database (Denmark)

    Oliveira, Ivo; Meyer, Anne S.; Afonso, Silvia

    2018-01-01

    The aim of this study was to evaluate morphological (of fruit and kernel), mechanical (namely shell rupture force) and antioxidant properties (including phenolics and flavonoid content) of five Portuguese almond cultivars, comparing them with two commercial cultivars (Glorieta and Ferragnès). Of ...... high kernel weight, low percentages of double kernels or losses during shelling and considerable higher phenolics and flavonoids content may be considered by industry during selection of almond.......). Of the analyzed traits, nut and kernel dimensions varied substantially and were used to describe cultivars. However, some traditional cultivars recorded similar (Pegarinhos), or even higher (Amendoão, Casanova and Refêgo) nut and kernel weight than commercial cultivars. Furthermore, shelling percentage...... of traditional cultivar (Bonita) was higher than commercial cultivars. Rupture force necessary to break fruits of all traditional cultivars was higher than commercial ones, and was correlated to nut weight cultivars. The phenolics, flavonoids content and antioxidants were higher for Casanova. Parameters like...

  18. Explanation of the barrier heights of graphene Schottky contacts by the MIGS-and-electronegativity concept

    Science.gov (United States)

    Mönch, Winfried

    2016-09-01

    Graphene-semiconductor contacts exhibit rectifying properties and, in this respect, they behave in exactly the same way as a "conventional" metal-semiconductor or Schottky contacts. It will be demonstrated that, as often assumed, the Schottky-Mott rule does not describe the reported barrier heights of graphene-semiconductor contacts. With "conventional" Schottky contacts, the same conclusion was reached already in 1940. The physical reason is that the Schottky-Mott rule considers no interaction between the metal and the semiconductor. The barrier heights of "conventional" Schottky contacts were explained by the continuum of metal-induced gap states (MIGSs), where the differences of the metal and semiconductor electronegativities describe the size and the sign of the intrinsic electric-dipoles at the interfaces. It is demonstrated that the MIGS-and-electronegativity concept unambiguously also explains the experimentally observed barrier heights of graphene Schottky contacts. This conclusion includes also the barrier heights reported for MoS2 Schottky contacts with "conventional" metals as well as with graphene.

  19. Physiological Responses of Some Iranian Grape Cultivars to Iron Chelate Application in Calcareous Soil

    Directory of Open Access Journals (Sweden)

    H. Doulati Baneh

    2016-07-01

    Full Text Available Introduction: Iron chlorosis is considered to be one of the most important nutritional disorders in grapevines, particularly in calcareous soils that under these conditions fruit yield and quality is depressed in the current year and fruit buds poorly develop for following year. Symptoms of iron chlorosis in orchards and vineyards are usually more frequent in spring when shoot growth is rapid and bicarbonate concentration in the soil solution buffers soil pH in the rhizosphere and root apoplast. Several native grapevine (Vitis vinifera L. genotypes, highly appreciated for their organoleptic characteristics and commercial potential, are widely cultivated in Iran. Cultivated plants differ as to their susceptibility to Fe deficiency in calcareous soils, some being poorly affected while others showing severe leaf chlorotic symptoms. Selection and the use of Fe-efficient genotypes is one of the important approaches to prevent this nutritional problem. In this research the response of three local grapevine cultivars was evaluated to iron chelate consumption in a calcareous soil (26% T.N.V. Materials and Methods: Well rooted woody cuttings of three autochthonous varieties (Rasha, Qezel uzum, Keshmeshi Qermez were cultivated in pots filled with a calcareous soil with iron chelate consumption at three rates (0, 7.5 and 15 mg Fe/ Kg soil. The study was conducted with two factors (cultivar and iron chelate and 3 replicates in a factorial arrangement based on randomized complete block design. Plant parameters including vegetative growth, chlorophyll index and leaf area were monitored during the growth period. At the end of the treatment, fresh and dry weight of shoots and roots were determined. The concentrations of macro and micro elements in the leaves were assayed using an atomic absorption and spectrophotometer. One-way-ANOVA was applied comparing the behavior of the cultivars growing. Results and Discussion: Analysis of variance showed that chlorophyll

  20. Stems age, nitrogen fertilizer and salicylic acid application in cutting induction of noble dendrobium orchid of the Yamamoto series cultivars

    Directory of Open Access Journals (Sweden)

    Jeferson João Soccol

    2017-06-01

    Full Text Available Propagation of noble dendrobium orchid (Dendrobium nobile Lindl. by cutting was studied in two experiments. In the first experiment we evaluated the effect stem age on propagation success: mature stems - from already bloomed stems; and young stems – yet to bloom; and Nitrogen fertilizer application, from two sources: as Nitrate and Ammonium (respectively as Calcium Nitrate at concentrations of: 5.81 gL-1; 11.61 gL-1; 17.42 gL-1; and Urea at concentrations of 2.00 gL-1; 4.00 gL-1 and 6.00 gL-1 plus control treatments. We evaluated the following parameters: the number of cuttings stalks that launched shoots and/or roots, vigor, number of roots per plant and root length per plant. Factorial analysis of variance (stems age x source of Nitrogen; and age of stem x Nitrogen level was applied using a Generalized Linear Model (GLM approach. Where significant differences were observed, averages were compared using post-hoc tests (Tukey. Propagation success was higher using cuttings from mature stems (60.2%, a value 1.6 times higher than obtained with stem cuttings from young stems (38.0%. Application of Nitrogen, in both forms, did not influence any of the evaluated parameters. In the second experiment we treated cuttings from mature stems with Salicylic acid in 3 concentrations (0.10 mM; 0.50 mM; 1.00 mM and plus a control treatment. Evaluated parameters included proportion of cuttings stalks that launched shoots and/or roots, leaf length, root length, and number of roots per stem cutting. Factorial analysis of variance was applied with post-hoc tests. Application of 0.50 mM of Salicylic acid increased the proportion of cuttings stalks that launched shoots and/or roots by 20.5% relative to the control treatment.

  1. The Influence of Different Assist Gases on Ductile Cast Iron Cutting by CO2 Laser

    Directory of Open Access Journals (Sweden)

    Meško J.

    2017-12-01

    Full Text Available This article deals with the technology and principles of the laser cutting of ductile cast iron. The properties of the CO2 laser beam, input parameters of the laser cutting, assist gases, the interaction of cut material and the stability of cutting process are described. The commonly used material (nodular cast iron - share of about 25% of all castings on the market and the method of the laser cutting of that material, including the technological parameters that influence the cutting edge, are characterized. Next, the application and use of this method in mechanical engineering practice is described, focusing on fixing and renovation of mechanical components such as removing the inflow gate from castings with the desired quality of the cut, without the further using of the chip machining technology. Experimental samples from the nodular cast iron were created by using different technological parameters of laser cutting. The heat affected zone (HAZ, its width, microstructure and roughness parameter Pt was monitored on the experimental samples (of thickness t = 13 mm. The technological parameters that were varied during the experiments included the type of assist gases (N2 and O2, to be more specific the ratio of gases, and the cutting speed, which ranged from 1.6 m/min to 0.32 m/min. Both parameters were changed until the desired properties were achieved.

  2. Competitividade de cultivares de arroz irrigado com cultivar simuladora de arroz-vermelho

    OpenAIRE

    Balbinot Junior,Alvadi Antonio; Fleck,Nilson Gilberto; Menezes,Valmir Gaedke; Agostinetto,Dirceu

    2003-01-01

    Características morfológicas e fisiológicas de plantas cultivadas podem afetar sua habilidade competitiva com plantas daninhas. Este trabalho objetivou investigar a competitividade de cultivares de arroz irrigado (Oryza sativa L.) com cultivar simuladora de arroz-vermelho. Investigou-se na safra 2000/2001 o comportamento de oito genótipos de arroz, cultivados na presença ou ausência da cultivar de arroz EEA 406, que simulou infestação de arroz-vermelho. Aos 45 e aos 60 dias após a semeadura, ...

  3. Clonal evaluation of new ornamental pineapple hybrids to use as cut flowers

    Directory of Open Access Journals (Sweden)

    Davi Silva Costa Junior

    2016-09-01

    Full Text Available Embrapa Cassava and Fruits has developed ornamental pineapple hybrids for several categories of ornamental use including cut flowers, potted plants and landscaping. The objective of this study was to carry out a clonal evaluation of two ornamental hybrids using quantitative and qualitative morphological descriptors to recommend these hybrids as new ornamental pineapple cultivars. Twenty plants of each hybrid (PL01 and PL04 were evaluated regarding the response to floral induction as well as the stability and homogeneity of the clones in two production cycles. The descriptive statistics were calculated and analyzed to determine the genetic distance based on the Gower algorithm. Four groups were formed, two using parental data and the other two containing the different hybrids that were evaluated in the two growing cycles. In the floral evaluation, the time from field planting to harvest of the stem as a cut flower was determined to be as long as 17 months in the first cycle and 13.5 months in the second cycle for both hybrids. They were characterized as a novelty in the flower market; they showed genetic stability and homogeneity and can be recommended as new cultivars of ornamental pineapple because they exhibit satisfactory quality and meet the market requirements.

  4. Effects of solar UVB radiation on growth, flowering and yield of central and southern European maize cultivars (Zea mays L.)

    International Nuclear Information System (INIS)

    Mark, U.; Saile-Mark, M.; Tevini, M.

    1996-01-01

    Different cultivars of maize (Zea mays L.) originating from Central and South Europe were grown from June to September 1994 for 16 weeks in two greenhouses covered with different UVB-absorbing (280-320 nm) plastic foils. Using the ambient UVB radiation level of a southern location (Portugal, 38.7 o N) in one of the greenhouses as an enhanced radiation compared to the reduced radiation in the second greenhouse, an increase of about 12% of UVB was simulated. Six of the eight cultivars examined showed significant reductions in height of up to 18.9% at all developmental stages under increased UVB. In contrast to this, the fresh and dry weight as well as the leaf area was reduced under UVB only at early developmental stages, but with ongoing development the UVB stressed plants caught up. The total content of absorbing compounds of the maize cultivars was completely unaffected by UVB. A flowering delay up to a maximum of 5 days was observed under higher UVB in several cultivars. Probably due to this delay in the cob development the yield decreased to 27.7% under higher UVB at the first harvest after 12 and 14 weeks, whereas at the second harvest after 14 and 16 weeks yield reduction levelled off. (Author)

  5. Salt Tolerance of Six Switchgrass Cultivars

    Directory of Open Access Journals (Sweden)

    Youping Sun

    2018-04-01

    Full Text Available Panicum virgatum L. (switchgrass cultivars (‘Alamo’, ‘Cimarron’, ‘Kanlow’, ‘NL 94C2-3’, ‘NSL 2009-1’, and ‘NSL 2009-2’ were evaluated for salt tolerance in two separate greenhouse experiments. In experiment (Expt. 1, switchgrass seedlings were irrigated with a nutrient solution at an electrical conductivity (EC of 1.2 dS·m−1 (control or a saline solution (spiked with salts at an EC of 5.0 dS·m−1 (EC 5 or 10.0 dS·m−1 (EC 10 for four weeks, once a week. Treatment EC 10 reduced the tiller number by 32% to 37% for all switchgrass cultivars except ‘Kanlow’. All switchgrass cultivars under EC 10 had a significant reduction of 50% to 63% in dry weight. In Expt. 2, switchgrass was seeded in substrates moistened with either a nutrient solution of EC 1.2 dS·m−1 (control or a saline solution of EC of 5.0, 10.0, or 20.0 dS·m−1 (EC 5, EC 10, or EC 20. Treatment EC 5 did not affect the seedling emergence, regardless of cultivar. Compared to the control, EC 10 reduced the seedling emergence of switchgrass ‘Alamo’, ‘Cimarron’, and ‘NL 94C2-3’ by 44%, 33%, and 82%, respectively. All switchgrass cultivars under EC 10 had a 46% to 88% reduction in the seedling emergence index except ‘NSL 2009-2’. No switchgrass seedlings emerged under EC 20. In summary, high salinity negatively affected switchgrass seedling emergence and growth. Dendrogram and cluster of six switchgrass cultivars indicated that ‘Alamo’ was the most tolerant cultivar, while ‘NSL 2009-2’ was the least tolerant cultivar at both seedling emergence and growth stages. A growth-stage dependent response to salinity was observed for the remaining switchgrass cultivars. ‘NSL 2009-1’ and ‘NL 94C2-3’ were more tolerant to salinity than ‘Cimarron’ and ‘Kanlow’ at the seedling emergence stage; however, ‘Kanlow’ and ‘Cimarron’ were more tolerant to salinity than ‘NSL 2009-1’ and ‘NL 94C2-3’ at the seedling growth

  6. A stakeless yard long bean cultivar derived from an interspecific cross between cowpea Vigna unguiculata L. (Walp) and yard long bean Vigna sesquipedalis L. (Verdc.)

    International Nuclear Information System (INIS)

    Luadthong, Sanit

    1990-01-01

    Full text: 'Yard long bean' is an important vegetable in the Thai diet, particularly in Northeast Thailand. However, growing 'yard long beans' requires stakes for supporting the twining stems and keeping the pod from touching the ground. Staking costs money, takes time and needs labour. An ideal cultivar would be a 'yard long bean' with erect plant type and under 80 cm in height that produces typical long bean pods and allows convenient picking during the harvest time. An attempt to breed such a cultivar was made by crossing cowpea Vigna unguiculata L. (Walp.) with' yard long bean' Vigna sesquipedalis L. (Verdc.) in 1984. This resulted in a new cultivar 'KKU 25'. This cultivar, having erect plant type, requires no staking for supporting the stem and produces long fresh pods with acceptable taste which can be harvested within 43 days. The average pod length is 48 cm, and pod diameter 1.43 cm. In a preliminary yield trial, an average fresh pod yield of 16 t/ha was obtained. (author)

  7. New Finnish growth references for children and adolescents aged 0 to 20 years: Length/height-for-age, weight-for-length/height, and body mass index-for-age.

    Science.gov (United States)

    Saari, Antti; Sankilampi, Ulla; Hannila, Marja-Leena; Kiviniemi, Vesa; Kesseli, Kari; Dunkel, Leo

    2011-05-01

    Growth curves require regular updates due to secular trends in linear growth. We constructed contemporary growth curves, assessed secular trends in height, and defined body mass index (BMI) cut-off points for thinness, overweight, and obesity in Finnish children. Mixed cross-sectional/longitudinal data of 73,659 healthy subjects aged 0-20 years (born 1983-2008) were collected from providers in the primary health care setting. Growth references for length/height-for-age, weight-for-length/height, and BMI-for-age were fitted using generalized additive models for location, scale, and shape (GAMLSS). BMI percentile curves passing through BMIs 30, 25, 18.5, 17, and 16 kg/m(2) at the age of 18 years were calculated to define limits for obesity, overweight, and various grades of thinness. Increased length/height-for-age was seen in virtually all age-groups when compared to previous Finnish growth data from 1959 to 1971. Adult height was increased by 1.9 cm in girls and 1.8 cm in boys. The largest increases were seen during the peripubertal years: up to 2.8 cm in girls and 5.6 cm in boys. Median weight-for-length/height had not increased. New Finnish references for length/height-for-age, weight-for-length/height, and BMI-for-age were constructed and should be implemented to monitor growth of children in Finland.

  8. Susceptibility of different parsley cultivars to infestation by pathogenic fungi

    Directory of Open Access Journals (Sweden)

    Jacek Nawrocki

    2012-12-01

    Full Text Available The experiments were carried out in the years 2002 and 2003 on parsley seeds of 6 cultivars: Alba, Berlińska, Cukrowa, Kinga, Lenka, and Vistula. Mycological analysis of parsley seeds showed that the most common inhabitans were fungi from genus Alternaria (mainly A. alternata and A. radicina and Fusarium, especially F. avenaceum and F. oxysporum. During the glasshouse investigations fungi Alternaria radicina, A. alternata and Fusarium avenaceum were the main reason for parsley damping-off. The highest number of infected seedlings was observed for Berlińska and Kinga, because in both years of experiments these cultivars had the lowest number of healthy seedlings. The highest number of healthy seedlings had cultivars Alba and Lenka, especially in the second year of experiments. In the field experiments not only fungi from genus Alternaria and Fusarium were the most often isolated from diseased parsley seedlings. Fusarium oxysporum was more often isolated from diseased field seedlings than from glasshouse parsley seedlings. Other fungies isolated often from parsley seedlings cultivated in the field were: Pythium spp., Rhizoctonia solani, Cylindrocarpon destructans and Stemphylium botryosum.

  9. A study of insulin resistance by HOMA-IR and its cut-off value to identify metabolic syndrome in urban Indian adolescents.

    Science.gov (United States)

    Singh, Yashpal; Garg, M K; Tandon, Nikhil; Marwaha, Raman Kumar

    2013-01-01

    Insulin resistance (IR) and associated metabolic abnormalities are increasingly being reported in the adolescent population. Cut-off value of homeostasis model of assessment IR (HOMA-IR) as an indicator of metabolic syndrome (MS) in adolescents has not been established. This study aimed to investigate IR by HOMA-IR in urban Indian adolescents and to establish cut-off values of HOMA-IR for defining MS. A total of 691 apparently healthy adolescents (295 with normal body mass index (BMI), 205 overweight, and 199 obese) were included in this cross-sectional study. MS in adolescents was defined by International Diabetes Federation (IDF) and Adult Treatment Panel III (ATP III) criteria. IR was calculated using the HOMA model. Mean height, waist circumference (WC), waist/hip ratio (WHR), waist/height ratio (WHtR), and blood pressure were significantly higher in boys as compared to girls. The HOMA-IR values increased progressively from normal weight to obese adolescents in both sexes. Mean HOMA-IR values increased progressively according to sexual maturity rating in both sexes. HOMA-IR value of 2.5 had a sensitivity of >70% and specificity of >60% for MS. This cut-off identified larger number of adolescents with MS in different BMI categories (19.7% in normal weight, 51.7% in overweight, and 77.0% in obese subjects) as compared to the use of IDF or ATP III criteria for diagnosing MS. Odds ratio for having IR (HOMA-IR of >2.5) was highest with WHtR (4.9, p pHOMA-IR increased with sexual maturity and with progression from normal to obese. A HOMA-IR cut-off of 2.5 provided the maximum sensitivity and specificity in diagnosing MS in both genders as per ATP III and IDF criteria.

  10. Analysis of the genetic diversity of Chinese native Cannabis sativa cultivars by using ISSR and chromosome markers.

    Science.gov (United States)

    Zhang, L G; Chang, Y; Zhang, X F; Guan, F Z; Yuan, H M; Yu, Y; Zhao, L J

    2014-12-12

    Hemp (Cannabis sativa) is an important fiber crop, and native cultivars exist widely throughout China. In the present study, we analyzed the genetic diversity of 27 important Chinese native hemp cultivars, by using inter-simple sequence repeats (ISSR) and chromosome markers. We determined the following chromosome formulas: 2n = 20 = 14m + 6sm; 2n = 20 = 20m; 2n = 20 = 18m + 2sm; 2n = 20 = 16m + 4sm; and 2n = 20 = 12m + 8sm. The results of our ISSR analysis revealed the genetic relationships among the 27 cultivars; these relationships were analyzed by using the unweighted pair-group method based on DNA polymorphism. Our results revealed that all of the native cultivars showed considerable genetic diversity. At a genetic distance of 0.324, the 27 varieties could be classified into five categories; this grouping corresponded well with the chromosome formulas. All of the investigated hemp cultivars represent relatively primitive types; moreover, the genetic distances show a geographical distribution, with a small amount of regional hybridity.

  11. Heat transfer characteristics in a channel fitted with zigzag-cut baffles

    Energy Technology Data Exchange (ETDEWEB)

    Nuntadusit, Chayut; Waehayee, Makatar [Prince of Songkla University, Hat Yai (Thailand); Piya, Ibroheng [Princess of Naradhiwas University, Naradhiwas (Thailand); Eiamsa-ard, Smith [Mahanakorn University of Technology, Bangkok (Thailand)

    2015-06-15

    The heat transfer characteristics were experimentally investigated in a wind channel with different types of cut baffles for heat transfer augmentation. The aim of using zigzag-cut baffles is to create 3D flow structure behind the baffles instead of transverse vortex flow leading to enhance heat transfer. In this study, 4 types of baffles were examined; conventional baffle (Rectangular cross section with no cut), baffle with rectangular zigzag-cut, baffle with triangle zigzag-cut at 45 degree and at 90 degree. All of the baffles have the same height at H = 15 mm and flow blocking area. In the experiment, the row of seven baffles was attached on the inner surface of wind channel. The effects of pitch spacing length were also investigated at baffle pitch distance P/H = 4, 6 and 8 (H: Height of baffle). The experiments were performed at constant Reynolds number (Re) of 20000. The heat transfer patterns via Thermochromic liquid crystal sheet were visualized and recorded with a digital camera. The recorded images were then analyzed with image processing technique to obtain the distribution of Nusselt number. The flow characteristics pass through the baffles were also numerically studied with CFD simulation for understanding the heat transfer characteristics. The friction losses were measured to evaluate the thermal performance for each baffle. It was found that the baffle with rectangular zigzag-cut gives the best thermal performance due to heat transfer augmentation in upstream and downstream side of baffle.

  12. Biomechanical Analysis of Defensive Cutting Actions During Game Situations: Six Cases in Collegiate Soccer Competitions

    Directory of Open Access Journals (Sweden)

    Sasaki Shogo

    2015-06-01

    Full Text Available The strengths of interpersonal dyads formed by the attacker and defender in one-on-one situations are crucial for performance in team ball sports such as soccer. The purpose of this study was to analyze the kinematics of one-on-one defensive movements in soccer competitions, and determine the relationships between lower limb kinematics and the center of mass translation during cutting actions. Six defensive scenes in which a player was responding to an offender’s dribble attack were selected for analysis. To reconstruct the three-dimensional kinematics of the players, we used a photogrammetric model-based image-matching technique. The hip and knee kinematics were calculated from the matched skeleton model. In addition, the center of mass height was expressed as a ratio of each participant’s body height. The relationships between the center of mass height and the kinematics were determined by the Pearson’s product-moment correlation coefficient. The normalized center of mass height at initial contact was correlated with the vertical center of mass displacement (r = 0.832, p = 0.040 and hip flexion angle at initial contact (r = −0.823, p = 0.044. This suggests that the lower center of mass at initial contact is an important factor to reduce the downwards vertical center of mass translation during defensive cutting actions, and that this is executed primarily through hip flexion. It is therefore recommended that players land with an adequately flexed hip at initial contact during one-on-one cutting actions to minimize the vertical center of mass excursion.

  13. Cultivar e adubação NPK na produção de tomate salada Cultivar and NPK fertilization on yield of fresh market tomato

    Directory of Open Access Journals (Sweden)

    Paulo Renato Z. Santos

    2001-03-01

    Full Text Available O objetivo deste trabalho foi estudar o efeito de cultivar, da adubação NPK e da interação desses fatores na produção de tomate salada tutorado. O experimento foi conduzido em Pelotas (RS no ano agrícola 1995/96. Foram utilizadas cinco cultivares (Flora-Dade, Max, Empire, Pacific e Diva e três níveis (2,0, 3,5 e 5,0 t/ha de adubação NPK (3,6-7,2-10. Os tratamentos foram dispostos sob esquema fatorial em delineamento de blocos casualizados, com três repetições. As cultivares Empire e Pacific apresentaram frutos com maior peso médio do que Flora-Dade, Max e Diva. O número de frutos por planta aumentou com a elevação do nível de adubação de 2,0 para 3,5 t/ha, enquanto que o peso médio de frutos diminuiu, sem alterar a produção. As cultivares apresentaram respostas diferenciais aos níveis de adubação, em relação ao peso médio de frutos.The objective of this work was to study the effect of cultivar, NPK fertilization and the interaction on yield components of fresh market tomatoes. The experiment was carried out in Pelotas, Brazil, in 1995/96 season. Five cultivars (Flora-Dade, Max, Empire, Pacific and Diva and three fertilization levels (2.0, 3.5 and 5.0 t/ha of NPK (3.6-7.2-10 were used. The treatments were displayed under a factorial scheme, in a randomized complete block design, with three repetitions. Empire and Pacific cultivars showed higher average fruit weight than Flora-Dade, Max and Diva. The number of fruits per plant increased with the elevation of fertilization levels from 2.0 to 3.5 t/ha, while the average fruit weight diminished, without changing yield. The cultivars showed differential response to fertilization levels, in relation to average fruit weight.

  14. Effects of Cutting Edge Microgeometry on Residual Stress in Orthogonal Cutting of Inconel 718 by FEM.

    Science.gov (United States)

    Shen, Qi; Liu, Zhanqiang; Hua, Yang; Zhao, Jinfu; Lv, Woyun; Mohsan, Aziz Ul Hassan

    2018-06-14

    Service performance of components such as fatigue life are dramatically influenced by the machined surface and subsurface residual stresses. This paper aims at achieving a better understanding of the influence of cutting edge microgeometry on machined surface residual stresses during orthogonal dry cutting of Inconel 718. Numerical and experimental investigations have been conducted in this research. The cutting edge microgeometry factors of average cutting edge radius S¯, form-factor K , and chamfer were investigated. An increasing trend for the magnitudes of both tensile and compressive residual stresses was observed by using larger S¯ or introducing a chamfer on the cutting edges. The ploughing depth has been predicted based on the stagnation zone. The increase of ploughing depth means that more material was ironed on the workpiece subsurface, which resulted in an increase in the compressive residual stress. The thermal loads were leading factors that affected the surface tensile residual stress. For the unsymmetrical honed cutting edge with K = 2, the friction between tool and workpiece and tensile residual stress tended to be high, while for the unsymmetrical honed cutting edge with K = 0.5, the high ploughing depth led to a higher compressive residual stress. This paper provides guidance for regulating machine-induced residual stress by edge preparation.

  15. Newly registered small grains cultivars from Zaječar

    Directory of Open Access Journals (Sweden)

    Dodig Dejan

    2006-01-01

    Full Text Available The paper presents principal properties of 5 new cultivars of small grains created in the Center for Agricultural and Technological Research in Zaječar. They are as follows: Arena (winter bread wheat, Premium (winter malting barley, Tango (winter triticale, Center (spring oat and Balsa (spring naked barley. In 2004 and 2005 these cultivars were registered by the Ministry of Agriculture, Forestry and Water Management of the Republic of Serbia. The Arena cultivar has good indices of technological quality and high yield genetic potential which is successfully preserved even in dry years. The Premium cultivar, besides high yield capacity, has a very low protein grain content what makes it especially suitable for brewers industry. Triticale Tango is intended, in the first place, for animal feeds and like Arena cultivar. is highly tolerant to draught. Spring oat Center is Zaječar's first made oat cultivar in this group of small grains. Cultivar Balsa is the first spring six-row naked barley in Serbia and Montenegro. Creating of Balsa cultivar is the attempt to meet the future demands on the market. By the act of registering above mentioned cultivars the Center in Zajecar has completed and enlarged its already existing variety of small grains assortment.

  16. Atividade de fosfatases em gramíneas forrageiras em resposta à disponibilidade de fósforo no solo e à altura de corte das plantas Phosphatase activity in forage grasses as influenced by soil phosphorus availability and plant cutting height

    Directory of Open Access Journals (Sweden)

    Flancer Novais Nunes

    2008-10-01

    intenso, independentemente da dose de P, tanto Brachiaria quanto Panicum apresentaram menor EUP. Isso ocorreu associado à maior atividade das enzimas APase e RNase, indicando que outros mecanismos relacionados com a adaptação das plantas a baixas disponibilidades de P podem estar envolvidos.The nutrient use efficiency, expressed by the ratio between the produced biomass and nutrient content, is an important adaptive characteristic of plants, particularly of those cultivated in low-fertility soils. A high P-use efficiency (PUE is conferred by high P remobilization rates, i.e., P transport to regions of greater metabolic demand in the plant. High P remobilization rates have been associated with high acid phosphatase (APase and ribonuclease (RNase enzyme activities. In our study, we evaluated the activity of these enzymes in Brachiaria decumbens, with a low, and Panicum maximum cv Tanzânia, with a high P demand, cultivated in soil treated with different P rates and cut at different heights. The experiment was carried out in a greenhouse, using B-horizon samples of a clayey Yellow-Red Latosol. The treatments consisted of a factorial combination of two grasses, three P rates (100, 200 and 500 mg dm-3 and three cutting heights: no cutting, 15 and 30 cm above the soil surface for Brachiaria, and no cutting, 20 and 40 cm for Panicum. The experimental units consisted of pots with 10 dm³ soil, with 10 plants each. Results indicated that there was no significant difference between biomass production of the two grasses, but the P application resulted in a higher biomass yield and P shoot concentration. The biomass production of plants cut at a lower height was smaller and P concentrations in shoots were higher. A significant effect of P rates on the APase and the RNase activities was observed in both forages. In plants grown at the lowest P rate enzyme activities and PUE were the highest. The activity of both phosphatases decreased with plant aging. In the treatment with the

  17. Vitis International Variety Catalogue (VIVC: A cultivar database referenced by genetic profiles and morphology

    Directory of Open Access Journals (Sweden)

    Maul Erika

    2015-01-01

    Full Text Available The establishment of the Vitis International Variety Catalogue (VIVC dates back to 1984. The idea was to virtually assemble all accessions maintained in the worldwide existing collections to face genetic erosion. In many cases synonymy, homonymy and misnaming hampered the clear assignment of cultivars/accessions to prime names. In the past 15 years nuclear microsatellites, in particular the nine SSR-markers VVS2, VVMD5, VVMD7, VVMD25, VVMD27, VVMD28, VVMD32, VrZAG62 and VrZAG79 were extensively applied for cultivar recognition in combination with ampelography. Genetic fin- gerprints of more than 15,000 cultivars/accessions were collected. They were taken from more than 300 articles and from microsatellite databases on the web. Allele sizes were adapted according to own internal reference varieties. Comparison of profiles revealed new identities like: “Corbeau” = “Sevilhao”, “Gragnelut” = “Fer”, “Beretinjak” = “Bianco d’Alessano”. The activities aim to equip the prime names of VIVC with reliable genetic profiles combined with the validation of their identity by ampelography. Fingerprints from 1,500 cultivars were already uploaded in VIVC. Two distinct search modules were imple- mented: “Microsatellites by varieties” and “Microsatellites by profiles”. The implementation assists the management of grape- vine genetic resources, e.g. trueness to type assessment in grapevine collections and serves research and breeding.

  18. Cassava chips quality as influenced by cultivar, blanching time and ...

    African Journals Online (AJOL)

    Currently, fried cassava chips and crisps are increasingly being consumed as snacks; and fried cassava chips are produced by street processors. The quality and safety of these products is not known, therefore, the current study was to establish the influence of cassava cultivar, blanching time and slice thickness on quality ...

  19. Study on Surface Integrity of AISI 1045 Carbon Steel when machined by Carbide Cutting Tool under wet conditions

    Directory of Open Access Journals (Sweden)

    Tamin N. Fauzi

    2017-01-01

    Full Text Available This paper presents the evaluation of surface roughness and roughness profiles when machining carbon steel under wet conditions with low and high cutting speeds. The workpiece materials and cutting tools selected in this research were AISI 1045 carbon steel and canela carbide inserts graded PM25, respectively. The cutting tools undergo machining tests by CNC turning operations and their performances were evaluated by their surface roughness value and observation of the surface roughness profile. The machining tests were held at varied cutting speeds of 35 to 53 m/min, feed rate of 0.15 to 0.50 mm/rev and a constant depth of cut of 1 mm. From the analysis, it was found that surface roughness increased as the feed rate increased. Varian of surface roughness was suspected due to interaction between cutting speeds and feed rates as well as nose radius conditions; whether from tool wear or the formation of a built-up edge. This study helps us understand the effect of cutting speed and feed rate on surface integrity, when machining AISI 1045 carbon steel using carbide cutting tools, under wet cutting conditions.

  20. Bagasse production potential from late sugar cane cultivars; Potencial produtivo de bagaco por cultivares tardios de cana-de-acucar

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Tulibio F. da; Silva Neto, Helio F. da; Tasso Junior, Luiz C.; Marques, Diogo; Marques, Marcos O. [Universidade Estadual Paulista (FCAV/UNESP), Jaboticabal, SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias], E-mail: tulibio_fernandes@yahoo.com.br

    2010-07-01

    In order to diversify energy sources, the residue of sugarcane gathers attributes that qualify its use. Therefore, this study was to evaluate the potential of bagasse production in late cultivars of sugarcane. The experimental design was a randomized block design with 6 treatments (cultivars) and 3 replications. The experiment was carried out at FCAV/UNESP Jaboticabal. To calculate the productivity, it was counted the number of stems in a row linear meter, it was obtained the weight of stems. The percentage of fiber for each cultivar was determined by a calculation of estimated production and productivity of mulch. Using these values to estimate the number of people who would benefit from the energy generated from the combustion of bagasse in a process of cogeneration power. The results were submitted to analysis of variance by F test and averages compared by Tukey test at 5% probability. Cultivars RB867515, RB72454 and CTC6 showed the best performance, indicating its greater potential for power cogeneration. Cultivars CTC IAC94-2 and 2101 were lower when considering the results obtained. (author)

  1. Response of Some Bread Wheat Cultivars to Foliar Application of Zn and Fe Different Forms in Two Locations with Different Soil Properties

    Directory of Open Access Journals (Sweden)

    E Arazmjoo

    2018-05-01

    Research Farm of Birjand University located in Amirabad region which the soil texture was sandy clay loam, with 8.1 pH, 0.15% organic matter, 30 ppm available P and 184 ppm available K. The second experiment was conducted at the South Khorasan Agricultural and Natural Resources Research and Education Center located in Mohammadieh region which the soil texture was loam, with 7.6 pH, 0.54% organic matter, 30 ppm available P and 140 ppm available K. At the end of growth stage wheat traits included days to heading, days to physiological maturity, grain filing period, plant height, spike length, peduncle length, number of grain per spike, 1000 grains weight, grain yield, biomass and harvest index were measured. Data analyses were performed using two-way analysis of variance (ANOVA with SAS 9.1. Means of treatments were compared between locations, cultivars and foliar application of zinc and iron according to protected Least Significance Differences (LSD test at the 5% level. Results and Discussion Results showed that location had a significant effect on all traits except for number of grains per spike. Grain yield and yield components were higher in soil of Mohammadieh against Amirabad. Investigated cultivars also were significantly different in all traits but days to heading and biomass. The higher number of grain per spike, grain yield and harvest index and relatively lower 1000 grains weight were related to new wheat cultivars. New cultivars also possessed less height and peduncle length and more grain filling period and spike length. Zinc foliar application significantly increased plant height, spike length, number of grain per spike, 1000 grains weight, grain yield and biomass but no significant effects were observed on days to heading and maturity, grain filing period, peduncle length and harvest index. Zinc sulfate treatment increased grain yield and biomass by 9.6 and 8.2 percent and chelated zinc increased these traits by 6.7 and 4.1 percent compared to control

  2. Soil Texture and Cultivar Effects on Rice (Oryza sativa, L. Grain Yield, Yield Components and Water Productivity in Three Water Regimes.

    Directory of Open Access Journals (Sweden)

    Fugen Dou

    Full Text Available The objective of this study was to determine the effects of water regime/soil condition (continuous flooding, saturated, and aerobic, cultivar ('Cocodrie' and 'Rondo', and soil texture (clay and sandy loam on rice grain yield, yield components and water productivity using a greenhouse trial. Rice grain yield was significantly affected by soil texture and the interaction between water regime and cultivar. Significantly higher yield was obtained in continuous flooding than in aerobic and saturated soil conditions but the latter treatments were comparable to each other. For Rondo, its grain yield has decreased with soil water regimes in the order of continuous flooding, saturated and aerobic treatments. The rice grain yield in clay soil was 46% higher than in sandy loam soil averaged across cultivar and water regime. Compared to aerobic condition, saturated and continuous flooding treatments had greater panicle numbers. In addition, panicle number in clay soil was 25% higher than in sandy loam soil. The spikelet number of Cocodrie was 29% greater than that of Rondo, indicating that rice cultivar had greater effect on spikelet number than soil type and water management. Water productivity was significantly affected by the interaction of water regime and cultivar. Compared to sandy loam soil, clay soil was 25% higher in water productivity. Our results indicated that cultivar selection and soil texture are important factors in deciding what water management option to practice.

  3. Adaptabilidade e estabilidade fenotípica de cultivares de alface do grupo crespa em cultivo hidropônico Adaptability and phenotypic stability of crisp lettuce cultivars in hydroponics

    Directory of Open Access Journals (Sweden)

    Ronan Gualberto

    2009-03-01

    Full Text Available Considerando as diferentes estações climáticas em que a alface é cultivada durante o ano, é de se esperar a ocorrência de uma elevada interação genótipo x ambiente. Em função disto, neste trabalho estudou-se o desempenho produtivo, adaptabilidade e estabilidade fenotípica de seis cultivares de alface do grupo crespa (Deisy, Elba, Sabrina, Summer Green, Vera e Verônica, em sistema hidropônico NFT, instalado em casa-de-vegetação, na Universidade de Marília (SP. Foram conduzidos nove ensaios em três épocas (outono: Out n; inverno: Inv n e; primavera: Pri n, em delineamento inteiramente casualizado, com quatro repetições, avaliando-se quatro plantas por parcela. Ocorreram diferenças significativas entre ambientes (épocas de semeadura. Verificou-se que, de maneira geral, os três plantios realizados no outono apresentaram valores médios de produtividade (Out1 = 3,1; Out2 = 5,3 e; Out3 = 4,6 kg m² superiores aos realizados no inverno (Inv1 = 3,6; Inv2 = 3,5 e; Inv = 3,7 kg m² e primavera (Pri1 = 4,0; Pri2 = 3,6 e; Pri3 = 3,2 kg m². Embora a interação cultivares x ambientes também tenha sido significativa, para produtividade, à exceção dos ambientes Inv3 e Pri1, não ocorreram diferenças significativas entre as cultivares dentro de cada época de plantio e, para número de folhas por planta, ocorreram diferenças significativas entre as cultivares somente no ambiente Out3. As cultivares Deyse e Verônica foram as únicas a mostrarem adaptabilidade a todos ambientes estudados para produtividade; todas as cultivares apresentaram instabilidade para essa mesma característica. Para o número de folhas por planta, somente a cultivar Summer Green apresentou comportamento altamente previsível (estável, no entanto, mostrou-se adaptada somente aos ambientes desfavoráveis.Considering the climatic seasons in which lettuce is cultivated, probably a high interaction genotype x environment could be obtained. The yield

  4. Insight into the genetic variability analysis and cultivar identification of tall fescue by using SSR markers.

    Science.gov (United States)

    Fu, Kaixin; Guo, Zhihui; Zhang, Xinquan; Fan, Yan; Wu, Wendan; Li, Daxu; Peng, Yan; Huang, Linkai; Sun, Ming; Bai, Shiqie; Ma, Xiao

    2016-01-01

    Genetic diversity of 19 forage-type and 2 turf-type cultivars of tall fescue ( Festuca arundinacea Schreb.) was revealed using SSR markers in an attempt to explore the genetic relationships among them, and examine potential use of SSR markers to identify cultivars by bulked samples. A total of 227 clear band was scored with 14 SSR primers and out of which 201 (88.6 %) were found polymorphic. The percentage of polymorphic bands (PPB) per primer pair varied from 62.5 to 100 % with an average of 86.9 %. The polymorphism information content (PIC) value ranged from 0.116 to 0.347 with an average of 0.257 and the highest PIC value (0.347) was noticed for primer NFA040 followed by NFA113 (0.346) whereas the highest discriminating power (D) of 1 was shown in NFA037 and LMgSSR02-01C. A Neighbor-joining dendrogram and the principal component analysis identified six major clusters and grouped the cultivars in agreement with their breeding histories. STRUCTURE analysis divided these cultivars into 3 sub-clades which correspond to distance based groupings. These findings indicates that SSR markers by bulking strategy are a useful tool to measure genetic diversity among tall fescue cultivars and could be used to supplement morphological data for plant variety protection.

  5. THE EFFECT OF CULTIVAR AND BEARING TREE ON BUD DIFFERENTIATION, FROST DAMAGE AND FRUIT SET IN APPLE

    Directory of Open Access Journals (Sweden)

    Nikola Pavičić

    2004-06-01

    Full Text Available After severe winter frost, an examination was initiated of frost damage suffered by Idared and Golden Delicious clone B. The cultivars differed significantly in the differentiation intensity, the hare of damaged differentiated buds, but not in share of damaged undifferentiated buds. In both cultivars the bud damage was more intensive on long bearing wood than on spur, regardless differentiation grade. The interaction between the cultivar and the bearing wood was insignificant. The flower bud differentiation was better in Idared, but it also suffered more frost damage than the Golden Delicious clone B with differentiated buds, but not than that with undifferentiated buds. In both cultivars frost damage increases with increase of differentiated flower buds (R2=0.759; P≤0.001. The fruit set was within the limits of expectation only on the spurs of the Golden Delicious clone B, which showed strong tendency towards fruit set on long bearing shoots. In 2000, the yield of the cultivars was almost equal, as the result of thinning due to the frost damage on Idared.

  6. Antimicrobial discovery inspired by ecological interactions.

    Science.gov (United States)

    Molloy, Evelyn M; Hertweck, Christian

    2017-10-01

    Bacteria represent an unparalleled source of antibiotics used to treat infectious diseases. Yet, genome analyses have revealed that their full biosynthetic potential is much larger than expected. Valuable strategies to unearth hidden antibiotics are genome mining, pathway engineering and triggering, as well as co-cultivation approaches. Nevertheless, there is growing understanding that it is often essential to consider the ecological context and that there is a great potential for antimicrobial discovery from bacteria engaged in well-defined interactions with other organisms. Various ecological scenarios involving antimicrobial agents are outlined in this review: predator-prey and pathogenic interactions, the protection of insect assets such as offspring and cultivars, as well as host protection in symbiotic relationships with plants, invertebrates and animals/humans. The illustrative examples given reinforce the idea that examination of interactions between organisms can yield new antimicrobial compounds, and ultimately further our understanding of the function of these molecules in the environment. Copyright © 2017. Published by Elsevier Ltd.

  7. A modern Green Revolution gene for reduced height in wheat.

    Science.gov (United States)

    Würschum, Tobias; Langer, Simon M; Longin, C Friedrich H; Tucker, Matthew R; Leiser, Willmar L

    2017-12-01

    Increases in the yield of wheat during the Green Revolution of the late 20 th century were achieved through the introduction of Reduced height (Rht) dwarfing genes. The Rht-B1 and Rht-D1 loci ensured short stature by limiting the response to the growth-promoting hormone gibberellin, and are now widespread through international breeding programs. Despite this advantage, interference with the plant's response to gibberellin also triggers adverse effects for a range of important agronomic traits, and consequently modern Green Revolution genes are urgently required. In this study, we revisited the genetic control of wheat height using an association mapping approach and a large panel of 1110 worldwide winter wheat cultivars. This led to the identification of a major Rht locus on chromosome 6A, Rht24, which substantially reduces plant height alone as well as in combination with Rht-1b alleles. Remarkably, behind Rht-D1, Rht24 was the second most important locus for reduced height, explaining 15.0% of the genotypic variance and exerting an allele substitution effect of -8.8 cm. Unlike the two Rht-1b alleles, plants carrying Rht24 remain sensitive to gibberellic acid treatment. Rht24 appears in breeding programs from all countries of origin investigated, with increased frequency over the last decades, indicating that wheat breeders have actively selected for this locus. Taken together, this study reveals Rht24 as an important Rht gene of commercial relevance in worldwide wheat breeding. © 2017 The Authors The Plant Journal © 2017 John Wiley & Sons Ltd.

  8. COMBINING EFFECTS OF CULTURAL PRACTICES AND RESISTANT CULTIVARS ON REDUCING THE INCIDENCE OF Meloidogyne spp. AND Thrips palmy Karny ON POTATO

    Directory of Open Access Journals (Sweden)

    Wiwin Setiawati

    2013-05-01

    Full Text Available Root-knot nematode (Meloidogyne spp. and melon thrips (Thrips palmy Karny are two serious pests on potato. These pests are conventionally controlled with synthetic pesticides. Cultural practices based on integrated pest management (IPM are alternative methods to control these pests. The study aimed to determine the effectiveness of combined applications of cultural practices and potato cultivars in reducing the incidences of nematode and thrips. Treatments evaluated were methods of nematode and thrips control by implementing IPM and conventional practices. A split-plot randomized complete block design with four replications was  sed. The main plots were IPM or cultural practices (subsoiling, soil solarization and use of trap crop of marigold Tagetes erecta and conventional practices using synthetic pesticides. The subplots were five potato cultivars, i.e. No. 095 (Herta x FLS–17, 720050/Kikondo, 676068/ I.1085, Granola, and Atlantic. The results showed that applications of cultural practices in combination with potato cultivars reduced Meloidogyne spp. population and potato tuber damage by 53.70% and 61.36%, respectively, as well as a significantly decreased thrips population. In the cultural control plots, thrips populations were below the action threshold (10.0 nymphs per leaf, therefore no single application of pesticide was used. This was in contrast to the conventional control treatments where insecticide was spayed 10 times until harvest. The subsoiling and solarization cut off the life cycle of the thrips and any survive thrips were trapped by marigold plant. Population of T. palmi on the five potato cultivars differed significantly; the lowest population was found on the cultivars No. 095 (Herta x FLS-17 and 676068/I.1085. The cultural control practices combined with potato cultivar No. 095 (Herta x FLS–17 were the best treatment for controlling Meloidogyne spp. and T. palmi on potato and also produced the highest yield (31.01 t

  9. Test of remote control cutting equipment by Nd:YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Akio [Fuji Electric Corp. Research and Development Ltd., Yokosuka, Kanagawa (Japan); Hosoda, Hiroshi

    1997-11-01

    Technology of remote controlled cutting and reduction of generative secondary products have been required to the cutting system for decommissioning nuclear equipments. At a point of view that laser cutting technology by use of a Nd:YAG laser is effective, we have developed the laser cutting machine and carried out cutting tests for several stainless steel plates. This report is described the result of experiment by test equipment, about element technology of remote controlled cutting nuclear equipments. (author)

  10. Test of remote control cutting equipment by Nd:YAG laser

    International Nuclear Information System (INIS)

    Shimizu, Akio; Hosoda, Hiroshi.

    1997-01-01

    Technology of remote controlled cutting and reduction of generative secondary products have been required to the cutting system for decommissioning nuclear equipments. At a point of view that laser cutting technology by use of a Nd:YAG laser is effective, we have developed the laser cutting machine and carried out cutting tests for several stainless steel plates. This report is described the result of experiment by test equipment, about element technology of remote controlled cutting nuclear equipments. (author)

  11. Cultivar of Gerbera grown in soil less culture on inert substrates with open and closed systems in comparison with a traditional cultivation on soil in beds; Coltivazione di gerbera in idroponica su substrato con sistema di irrigazione a ciclo aperto e a ciclo chiuso a confronto con la coltivazione tradizionale in cassone su terriccio

    Energy Technology Data Exchange (ETDEWEB)

    Schiavi, A [MIRAAF, Istituto Sperimentale per l` Orticultura (Italy). Sezione di Ascoli Piceno; Venezia, A [Istituto Sperimentale per l` Orticoltura (Italy). Sezione di Montanaso Lomabardo; Martignon, G [Centro Ricerca Ambiente e Materiali, Unita` Calore residuo e Biomasse, Gruppo Agritermia, Milan (Italy)

    1996-01-01

    The aim of the experiment was the evaluation of the yield of several cultivar of gerbera grown in soil less culture on inert substrates with open and closed systems, in comparison with a traditional cultivation on soil in beds. The trial was carried out in the experimental station at Tavazzano (Milan), in a iron plastic greenhouse heated with the waste water discharged by the local thermo electrical power plant. Two inert substrates (rokwool and perlite) were tested in soil less culture both with an open system and a closed system, based on the reuse of the drained nutrient solution. The cultivars Rosula, Pascal, Queen Rebecca, Horizon, Sunspot e Fleur were utilized, grown with a plant density of 10 plants/mq. The trial started in april 1993 and ended in december 1994. The results have pointed out statistically significative differences in the production of cut flower in the growing systems tested. Plants grown in soil less culture with open system gave a number of cut flowers/plant higher both than those grown on soil and with soil less closed system. Agriperlite gave a better commercially yield than rockwool in soil less culture. The distribution of commercial cut flowers in the three category considered (extra, first and second class) was the same for the all thesis; the not marketable production was lower for plant grown on soil than on both the soil less culture systems. With regard to the response of the cultivar, Queen Rebecca and Pascal gave a commercial yield of about 30 cut flowers/plant higher than Rosula, Horizon and Fleur; the cultivar SunSpot showed the lower yield (17 cut flowers/plant).

  12. Advanced cutting techniques: laser and fissuration cutting

    International Nuclear Information System (INIS)

    Migliorati, B.; Gay, P.

    1984-01-01

    Experimental tests have been performed using CO 2 laser with output power 1 to 15 kW to evaluate the effect of varying the following parameters: material (carbon steel Fe 42 C, stainless steel AISI 304, concrete), laser power, beam characteristics, work piece velocity, gas type and distribution on the laser interaction zone. In the case of concrete, drilling depths of 80 mm were obtained in a few seconds using a 10 kW laser beam. Moreover pieces of 160 mm were cut at 0.01 meters per minute. Results with carbon steel indicated maximum thicknesses of 110 mm, cut at 0.01 meters per minute with 10 kW, depths about 20% lower were obtained with the AISI 304 stainless steel. A parallel investigation was aimed at characterizing particulate emission during the laser cutting process. At the end of the research it was possible to elaborate a preliminary proposal concerning a laser based dismantling system for the application to a typical Nuclear Power Station. (author)

  13. Solid-stemmed spring wheat cultivars give better androgenic response than hollow-stemmed cultivars in anther culture.

    Science.gov (United States)

    Weigt, Dorota; Kiel, Angelika; Nawracała, Jerzy; Pluta, Mateusz; Łacka, Agnieszka

    2016-01-01

    Solid-stemmed spring wheat cultivars ( Triticum aestivum L.) are resistant to the stem sawfly ( Cephus cinctus Nort.) and lodging. Anthers of 24 spring wheat cultivars with varying content of pith in the stem were used in the experiment. All were classified into three groups: solid, medium-solid and hollow stems. There was considerable influence of the cultivar on callus formation and green plant regeneration. The highest efficiency of green plant regeneration (24%) was observed for the solid-stemmed AC Abbey cultivar. There was no regeneration from the explants of four cultivars: CLTR 7027, Alentejano, Marquis and Bombona. Principal component analysis showed no differences between the cases under observation (callus induction and green plant regeneration) in their response to pre-treatment temperatures (4 and 8°C). The examination of the effects of various auxin types in the induction medium on callus formation and green plant regeneration revealed that the strongest stimulation of these processes was observed in the C17 medium with 2,4-D and dicamba. The efficiency of callus formation and green plant regeneration was greater in solid-stemmed cultivars than in hollow-stemmed cultivars.

  14. Error Analysis of 3D Metal Micromold Fabricated by Femtosecond Laser Cutting and Microelectric Resistance Slip Welding

    Directory of Open Access Journals (Sweden)

    Bin Xu

    2013-01-01

    Full Text Available We used micro-double-staged laminated object manufacturing process (micro-DLOM to fabricate 3D micromold. Moreover, the error of the micro-DLOM was also studied. Firstly, we got the principle error of the micro-DLOM. Based on the mathematical expression, it can be deduced that the smaller the opening angle α and the steel foil thickness h are, the smaller the principle error δ is. Secondly, we studied the error of femtosecond laser cutting. Through the experimental results, we know that the error of femtosecond laser cutting is 0.5 μm under 110 mW femtosecond laser power, 100 μm/s cutting speed, and 0.75 μm dimension compensation. Finally, we researched the error of microelectric resistance slip welding. Based on the research results, we can know that the minimum error of microcavity mold in the height direction is only 0.22 μm when welding voltage is 0.21 V and the number of slip welding discharge is 160.

  15. Estimation of loss of genetic diversity in modern Japanese cultivars by comparison of diverse genetic resources in Asian pear (Pyrus spp.).

    Science.gov (United States)

    Nishio, Sogo; Takada, Norio; Saito, Toshihiro; Yamamoto, Toshiya; Iketani, Hiroyuki

    2016-06-14

    Pears (Pyrus spp.) are one of the most important fruit crops in temperate regions. Japanese pear breeding has been carried out for over 100 years, working to release new cultivars that have good fruit quality and other desirable traits. Local cultivar 'Nijisseiki' and its relatives, which have excellent fruit texture, have been repeatedly used as parents in the breeding program. This strategy has led to inbreeding within recent cultivars and selections. To avoid inbreeding depression, we need to clarify the degree of inbreeding among crossbred cultivars and to introgress genetic resources that are genetically different from modern cultivars and selections. The objective of the present study was to clarify the genetic relatedness between modern Japanese pear cultivars and diverse Asian pear genetic resources. We genotyped 207 diverse accessions by using 19 simple sequence repeat (SSR) markers. The heterozygosity and allelic richness of modern cultivars was obviously decreased compared with that of wild individuals, Chinese pear cultivars, and local cultivars. In analyses using Structure software, the 207 accessions were classified into four clusters (K = 4): one consisting primarily of wild individuals, one of Chinese pear cultivars, one of local cultivars from outside the Kanto region, and one containing both local cultivars from the Kanto region and crossbred cultivars. The results of principal coordinate analysis (PCoA) were similar to those from the Structure analysis. Wild individuals and Chinese pears appeared to be distinct from other groups, and crossbred cultivars became closer to 'Nijisseiki' as the year of release became more recent. Both Structure and PCoA results suggest that the modern Japanese pear cultivars are genetically close to local cultivars that originated in the Kanto region, and that the genotypes of the modern cultivars were markedly biased toward 'Nijisseiki'. Introgression of germplasm from Chinese pear and wild individuals that are

  16. Evaluation of Diversity and Traits Correlation in Spring Wheat Cultivars under Drought Stress

    Directory of Open Access Journals (Sweden)

    Mohammad Reza NAGHAVI

    2015-09-01

    Full Text Available In order to study of diversity and classify agro-morphological characters under normal irrigation and drought stress in spring wheat cultivars, 20 cultivars were evaluated in the research farm of University of Tabriz, Iran. According to the results, significant correlation was found between grain yield and number of spikes per plant, number of tiller per plant, number of fertile tillers, spike length, root length, root number, root volume, root diameter and root dry weight under both conditions. Moreover, 1,000 grain weight and plant dry weight had significant positive correlation with grain yield under drought stress. Factor analysis detected four and two factors which explained 96.77% and 90.59% of the total variation in normal irrigation and drought stress conditions, respectively. In drought stress condition the first factor justified 69.52% of total variation and was identified as yield factor. The second factor explained 21.07% of total variation and represented the biomass and plant height factor. Cluster analysis was based on the four and two factors obtained. According to the amount of factors for clusters obtained under drought stress, ‘Kavir’, ‘Niknejhad’, ‘Moghan 3’, ‘Darya’ and ‘Marvdasht’ were identified as the most drought tolerant cultivars. Other cluster was comprised of ‘Bahar’, ‘Pishtaz’, ‘Bam’, ‘Sepahan’, ‘Sistan’, ‘Pars’ and ‘Sivand’ and was named as the most sensitive under drought stress. Tolerant cultivars identified within the study can be used for direct culture or as genitors in breeding programs.

  17. Quantum fields and Poisson processes: Interaction of a cut-off boson field with a quantum particle

    International Nuclear Information System (INIS)

    Bertrand, J.; Rideau, G.; Gaveau, B.

    1985-01-01

    The solution of the Schroedinger equation for a boson field interacting with a quantum particle is written as an expectation on a Poisson process counting the variations of the boson-occupation numbers for each momentum. An energy cut-off is needed for the expectation to be meaningful. (orig.)

  18. Potential of bagasse production from middle sugarcane cultivars; Potencial de producao de bagaco por cultivares medias de cana-de-acucar

    Energy Technology Data Exchange (ETDEWEB)

    Lebre, Antonio Carlos Pereira; Siva Neto, Helio Francisco da; Marques, Diogo; Marques, Marcos Omir; Tasso Junior, Luiz Carlos [Universidade Estadual Paulista (FCAV /UNESP), Jaboticabal, SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Tecnologia], E-mail: antoniocplebre8@hotmail.com

    2010-07-01

    In the search for sustainability a major concern relates to the sugarcane agroindustry waste, and their potential use as an energy source. In this sense, the objective was to identify the production and productivity of bagasse of different sugarcane cultivars, aimed at the completion of the cogeneration of electricity. The experimental design was a randomized block design with 6 treatments (cultivars) and 3 replications. The experiment was carried out at FCAV/UNESP-Jaboticabal. To calculate the productivity, the number of stems was counted in a meter, obtaining the weight of stems. The percentage of fiber for each cultivar was determined by calculating the estimated production and productivity of mulch. Using these values to estimate the potential number of people who could benefit from the electricity that would be produced by the combustion of bagasse generated within a system of cogeneration of electricity put in practice by the sugar mills and ethanol distilleries. Cultivars with the best performance IAC91-1099 and CEC 15 who obtained the highest production and productivity of mulch increases the number of people benefited. Cultivars IAC94-4004-5000 and IAC95 showed intermediate results and the cultivars SP81-3250 and RB855536 obtained less satisfactory results. (author)

  19. How to optimize ultrashort pulse laser interaction with glass surfaces in cutting regimes?

    Energy Technology Data Exchange (ETDEWEB)

    Bulgakova, Nadezhda M., E-mail: bulgakova@fzu.cz [HiLASE Centre, Institute of Physics ASCR, Za Radnicí 828, 25241 Dolní Břežany (Czech Republic); Institute of Thermophysics SB RAS, 1 Lavrentyev Ave., Novosibirsk 630090 (Russian Federation); Zhukov, Vladimir P. [Institute of Computational Technologies SB RAS, 6 Lavrentyev Ave., 630090 Novosibirsk (Russian Federation); Novosibirsk State Technical University, 20 Karl Marx Ave., 630073 Novosibirsk (Russian Federation); Collins, Adam R. [NCLA, NUI Galway, Galway (Ireland); Rostohar, Danijela; Derrien, Thibault J.-Y.; Mocek, Tomáš [HiLASE Centre, Institute of Physics ASCR, Za Radnicí 828, 25241 Dolní Břežany (Czech Republic)

    2015-05-01

    Highlights: • The factors influencing laser micromachining of transparent materials are analyzed. • Important role of ambient gas in laser processing is shown by numerical simulations. • The large potential of bi-wavelength laser processing is demonstrated. - Abstract: The interaction of short and ultrashort pulse laser radiation with glass materials is addressed. Particular attention is paid to regimes which are important in industrial applications such as laser cutting, drilling, functionalization of material surfaces, etc. Different factors influencing the ablation efficiency and quality are summarized and their importance is illustrated experimentally. The effects of ambient gas ionization in front of the irradiated target are also analyzed. A possibility to enhance laser coupling with transparent solids by bi-wavelength irradiation is discussed.

  20. Morphological diversity in fourteen cultivars Tiron village, Kediri, Indonesia

    Directory of Open Access Journals (Sweden)

    Nur Azis Fuad

    2016-01-01

    Full Text Available Tiron village, Kediri is one of central mangoes in Indonesia. Many cultivar of mangoes encountered at this location. This study aims to look at the diversity of mango cultivars in the Tiron Village, Kediri, Indonesia. Mangoes diversity is based on qualitative and quantitative character of each cultivar. The diversity among cultivar indicated by the standard deviation and variance in the eleven quantitative characters of mango. Mango cultivars categorized by phylogeny morphological characters. The method used for phylogeny analysis is an UPGMA method (unweighted pair group method with arithmetic mean. Phylogenic analysis is based by the qualitative character of the plant. The results showed there were fourteen cultivars of mango in the village of Tiron Kediri have high diversity. Fourteen mango cultivars were categorized four groups. Based on a qualitative character, there are four classes of mango. The first group is the Katul, Podang Urang, and Podang Lumut. The second group is the Gadung, Jaran, Madu, Endog, Pakel, Dodonilo, Ireng, Lanang and Cantek. Santok Kapur into groups to form groups of three and Kopyor fourth. The high diversity in the village mango Tiron Kediri potential for resource in situ germplasm.

  1. BRS Ana: cultivar de batata de duplo propósito BRS ANA: A dual purpose potato cultivar

    Directory of Open Access Journals (Sweden)

    Arione da S Pereira

    2010-12-01

    potential for processing into frozen French fries and flakes, released in 2007. It was developed by the Embrapa Potato Breeding Program (Embrapa Temperate Agriculture, Pelotas-RS; Embrapa Transference of Technology, Office of Canoinhas-SC; and Embrapa Vegetables, Brasília-DF, based on tuber appearance and yield, specific gravity and French fries quality. Tubers are red-skinned, lightly rough, oval shaped with shallow eyes. The pulp is white. Cultivar BRS Ana has high yield potential. In the subtropical ecosystem, cultivar BRS Ana showed higher yield (31.2 t ha-1 than the most used cultivars in Brazil when grown in autumn, and did not differ from them in the spring. In the tropical ecosystem, under irrigation, BRS Ana did not differ from both control cultivars. It produced higher percentage of marketable tubers (55.6% and average tuber weight (108.4 g than the controls in the fall crop of subtropical ecosystem. In both ecosystems, cultivar BRS Ana presented high specific gravity (1.086 and dry matter content (19.7%. The sensorial analysis showed that cultivar BRS Ana is adequate for home made French fries as well as for industrial processing. It is moderately susceptible to late blight (Phytophthora infestans and presents good resistance to early blight (Alternaria solani. The reaction to the tuber soft rot (Pectobacterium sp. is similar to the most used cultivars. It has low seed degeneration conferred by moderate resistance to PVY and low incidence of PLRV. Susceptibility to tuber physiological disorders has not been observed. It seems that BRS Ana has lower fertilizer and water requirements than the most planted cultivars, meaning reduction of crop cost and risk. In the subtropical ecosystem, tuberization starts later in spring, therefore BRS Ana should be planted earlier in the season.

  2. Responses of Several Apple Cultivars to Chemical Thinning Sprays ...

    African Journals Online (AJOL)

    Nevertheless, significantly (P 0.05) the number of seeds in the fruit, fruit the treatments did not affect (P length, fruit diameter and fruit length to diameter ratio. The chemical thinner and cultivar interactions were significant for some fruit characteristics. The Journal of Food Technology in Africa Volume 7 No.1, 2002, pp.

  3. Influence of modified atmosphere packaging on volatile compounds and physicochemical and antioxidant attributes of fresh-cut pineapple (Ananas comosus).

    Science.gov (United States)

    Montero-Calderón, Marta; Rojas-Graü, María Alejandra; Aguiló-Aguayo, Ingrid; Soliva-Fortuny, Robert; Martín-Belloso, Olga

    2010-04-28

    The effects of modified atmosphere packaging on volatile compound content and physicochemical and antioxidant attributes of Gold cultivar fresh-cut pineapples were assessed throughout storage at 5 degrees C. Fresh-cut pineapple pieces were packed under LO (low oxygen, 12% O(2), 1% CO(2)), AIR (20.9% O(2)) and HO (high oxygen, 38% O(2)) headspace atmospheres. Methyl butanoate, methyl 2-methylbutanoate, and methyl hexanoate were the most abundant volatiles regardless of the packaging atmosphere and days of storage; whereas most odor active volatiles were methyl and ethyl 2-methylbutanoate, 2,5-dimethyl-4-methoxy-3(2H)-furanone and ethyl hexanoate. Physicochemical attributes of pineapple did not significantly vary, whereas vitamin C content and total antioxidant capacity were lower for fresh-cut pineapple in HO (488 +/- 38 mg/100 mg(fw) and 54.4 +/- 5.7%, respectively) than for LO and AIR packages. Storage life of fresh-cut pineapple was limited to 14 days by volatile compounds losses and fermentation processes.

  4. Development Potential, in a Greenhouse, of Cuttings of the Hybrid Eucalyptus grandis x Eucalyptus camaldulensis

    Directory of Open Access Journals (Sweden)

    M. N. Garcia

    2013-03-01

    Full Text Available Abstract: This study evaluated the potential for development in the greenhouse, cuttings of the hybrid of Eucalyptus grandis x Eucalyptus camaldulensis in Sinop - Mato Grosso and generated equations to estimate the percentage of rooting parameters. Were measured: the percentage of cuttings with some degree of modification, the percentage of cuttings in the percentage of cuttings with roots larger than 10 cm in length. Also measured was the neck diameter, height and leaf area index. The heights and leaf area showed lower development within the greenhouse. The rooting potential is based on curve speed of rooting and was found 12 days after staking. The identification of the optimal point of withdrawal of the shoots of the greenhouse through the intercept curves daily current increase curve (DCI e daily average increase (DAI, being 19 days after staking. The company derives the stakes with 24 days underdoing the potential of the species and structures used.Keywords: Eucalyptus, greenhouse management and rooting

  5. CRESCIMENTO E EFICIÊNCIA NUTRICIONAL DO NITROGÊNIO EM CULTIVARES DE MILHETO FORRAGEIRO NA AMAZÔNIA

    Directory of Open Access Journals (Sweden)

    NILVAN CARVALHO MELO

    2015-01-01

    Full Text Available The millet is a forage with high yield potential, mainly due to its high tolerance to water deficit and adaptation to soils of low fertility. Even being adapted to soils of low fertility, it is responsive to nitrogen fertilization. The objective was to evaluate the growth and nutritional efficiency of millet forage cultivars, due to nitrogen (N. The experiment was carried out in a greenhouse, in a typical Yellow Oxisol Dystrophic. The experimental design was a completely randomized design, arranged in a 4 x 2 factorial scheme with six repetitions. The factors were the control treatment (without fertilization with N and three doses of N (75, 150 and 225 kg ha-1 in the form of urea and ammonium sulfate and two cultivars of pearl millet (BN2 and ADR500. The harvest was performed 80 days after the emergency. The higher production of dry matter of aerial part was obtained with the estimated dose of 179 kg ha-1 of N. The cultivar ADR500 showed the highest height and greater efficiency of translocation, while the BN2 showed higher N content of the aerial part and roots. The greater efficiency of use and translocation of N were achieved with doses estimated for 109 and 133 ha-1 of N for the cultivars ADR500 and BN2, respectively.

  6. Sugars profiles of different chestnut (Castanea sativa Mill.) and almond (Prunus dulcis) cultivars by HPLC-RI.

    Science.gov (United States)

    Barreira, João C M; Pereira, José Alberto; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

    2010-03-01

    Sugar profiles of different almond and chestnut cultivars were obtained by high-performance liquid chromatography (HPLC), by means of a refractive index (RI) detector. A solid-liquid extraction procedure was used in defatted and dried samples. The chromatographic separation was achieved using a Eurospher 100-5 NH(2) column using an isocratic elution with acetonitrile/water (70:30, v/v) at a flow rate of 1.0 ml/min. All the compounds were separated in 16 min. The method was optimized and proved to be reproducible and accurate. Generally, more than 95% of sugars were identified for both matrixes. Sugars profiles were quite homogeneous for almond cultivars; sucrose was the main sugar (11.46 +/- 0.14 in Marcona to 22.23 +/- 0.59 in Ferragnes g/100 g of dried weight), followed by raffinose (0.71 +/- 0.05 in Ferraduel to 2.11 +/- 0.29 in Duro Italiano), glucose (0.42 +/- 0.12 in Pegarinhos two seeded to 1.47 +/- 0.19 in Ferragnes) and fructose (0.11 +/- 0.02 in Pegarinhos two seeded to 0.59 +/- 0.05 in Gloriette). Commercial cultivars proved to have higher sucrose contents, except in the case of Marcona. Nevertheless, chestnut cultivars revealed a high heterogeneity. Sucrose was the main sugar in Aveleira (22.05 +/- 1.48), Judia (23.30 +/- 0.83) and Longal (9.56 +/- 0.91), while glucose was slightly prevalent in Boa Ventura (6.63 +/- 0.49). The observed variance could serve for inter-cultivar discrimination.

  7. Estimativa da similaridade genética e identificação de cultivares do morangueiro por análise de RAPD Estimate of the genetic similarity and identification of strawberry cultivars by RAPD analysis

    Directory of Open Access Journals (Sweden)

    José Henrique Conti

    2002-06-01

    Full Text Available Caracteres moleculares do morango foram avaliados para conhecer cultivares que estão sendo introduzidas no Brasil. Utilizou-se o método do polimorfismo de DNA amplificado ao acaso (RAPD. Os caracteres moleculares com maior poder de discriminação foram os "marcadores" gerados pelos "primers" Operon B8, Operon B19 e Operon G5, que foram eficientes para discriminar as vinte e seis cultivares estudadas. Os dados foram interpretados com o auxílio de dendograma, mapa de bandas, quadro de identificação e chave dicotômica. Foi possível distinguir seis grupos de similaridade, dois deles com cultivares selecionadas no Brasil, sendo um com 'Campinas', 'Agf 80', 'Piedade', 'Jundiaí' e 'Monte Alegre' e o outro com 'Obaira' e 'Mantiqueira'; três grupos com cultivares introduzidas, sendo o primeiro com 'Lassen', 'Reiko', 'Chandler', 'Pajaro', 'Blackmore' e 'Seascape', o segundo com 'Fern' e 'Oso Grande' e o terceiro com 'Florida Belle' e 'Selva' O último grupo reuniu as cultivares 'Dover' e 'Dabreak' junto com 'Princesa Isabel'.Strawberry cultivars introduced in Brazil were identified through molecular study. The method of Random Amplified Polymorphic DNA (RAPD was used. Molecular characters with larger discrimination power were produced by the primers Operon B8, Operon B19 and Operon G5. These were efficient to discriminate the twenty six studied cultivars. Data were analised through dendogram, bandmap, picture and dicotomic key. Six similarity groups were distinguished: Two with cultivars selected in Brazil, one with 'Campinas', 'Agf 80', 'Piedade', 'Jundiaí' and 'Monte Alegre' and the other with 'Obaira' and 'Mantiqueira'; three with introduced cultivars the first of which 'Lassen', 'Reiko', 'Chandler', 'Pajaro', 'Blackmore' and 'Seascape', the second with 'Fern' and 'Oso Grande' and the third with 'Florida Belle' and 'Selva'. The last group united the cultivars 'Dover' and 'Dabreak' with 'Princesa Isabel'.

  8. Material testing of copper by extrusion-cutting

    DEFF Research Database (Denmark)

    Segalina, F.; De Chiffre, Leonardo

    2017-01-01

    was developed and implemented on a CNC lathe. An investigation was carried out extrusion-cutting copper discs using high-speed-steel cutting tools at 100 m/min cutting speed. Flow stress values for copper under machining-relevant conditions were obtained from measurement of the extrusion-cutting force...

  9. Cutting of metal components by intergranular cracking

    International Nuclear Information System (INIS)

    Chavand, J.; Gauthier, A.; Lopez, J.J.; Tanis, G.

    1985-01-01

    The objective of this contract was to study a new steel-sheet cutting technique for dismantling nuclear installations without in principle producing secondary waste. This technique is based on intergranular cracking of steel induced by the combined action of penetration of molten metal into the steel and application of a mechanical load. Cutting has been achieved for stainless-steel sheets with thicknesses ranging from a few mm to 50 mm and for carbon-steel plates with thicknesses between 20 and 60 mm. For carbon steel is seems possible that components as thick as 100 mm can be cut. The tests have permitted selection of the heating methods and determination of the cracking parameters for the materials and range of thickness studied. In the case of thin sheets, results were obtained for cutting in varied positions suited to the techniques of dismantling in hot cells. A temperature-measuring system using an infrared camera has been developed to determine the variation of the temperature field established in the component. In association with the three-dimensional computation code COCO developed by the CEA, this system permits prediction of the changes in stresses in the cracked zone when the cutting parameters are modified. 34 figs

  10. The parametrization of Coulomb barrier heights and positions using the double folding model

    International Nuclear Information System (INIS)

    Qu, W.W.; Zhang, G.L.; Le, X.Y.

    2011-01-01

    The Coulomb barrier heights and positions are systematically shown with mass numbers and charge radii of the interacting nuclei. The nuclear potential is calculated by using the double folding model with the density-dependence nucleon-nucleon interaction (CDM3Y6). The pocket formulas are obtained for the Coulomb barrier heights and positions by analyzing several hundreds of heavy-ion systems with mass numbers from light nuclei to heavy nuclei. The parameterized formulas can reproduce the calculated barrier heights and positions by using the double folding model within the accuracy of ±1%. Moreover, the results are agreeable with the experimental data. The relation between the barrier height and the barrier position is also studied.

  11. Extended asymmetric-cut multilayer X-ray gratings.

    Science.gov (United States)

    Prasciolu, Mauro; Haase, Anton; Scholze, Frank; Chapman, Henry N; Bajt, Saša

    2015-06-15

    The fabrication and characterization of a large-area high-dispersion blazed grating for soft X-rays based on an asymmetric-cut multilayer structure is reported. An asymmetric-cut multilayer structure acts as a perfect blazed grating of high efficiency that exhibits a single diffracted order, as described by dynamical diffraction throughout the depth of the layered structure. The maximum number of grating periods created by cutting a multilayer deposited on a flat substrate is equal to the number of layers deposited, which limits the size of the grating. The size limitation was overcome by depositing the multilayer onto a substrate which itself is a coarse blazed grating and then polish it flat to reveal the uniformly spaced layers of the multilayer. The number of deposited layers required is such that the multilayer thickness exceeds the step height of the substrate structure. The method is demonstrated by fabricating a 27,060 line pairs per mm blazed grating (36.95 nm period) that is repeated every 3,200 periods by the 120-μm period substrate structure. This preparation technique also relaxes the requirements on stress control and interface roughness of the multilayer film. The dispersion and efficiency of the grating is demonstrated for soft X-rays of 13.2 nm wavelength.

  12. Examination of two lowland rice cultivars reveals that gibberellin-dependent early response to submergence is not necessarily mediated by ethylene.

    Science.gov (United States)

    Dubois, Vincent; Moritz, Thomas; García-Martínez, José L

    2011-01-01

    Using two lowland rice (Oryza sativa L.) cultivars we found that in both cases submerged-induced elongation early after germination depends on gibberellins (GAs). Submergence increases the content of the active GA 1 by enhancing the expression of GA biosynthesis genes, thus facilitating the seedlings to escape from the water and preventing asphyxiation. However, the two cultivars differ in their response to ethylene. The cultivar Senia (short), by contrast to cultivar Bomba (tall), does not elongate after ethylene application, and submerged-induced elongation is not negated by an inhibitor of ethylene perception. Also, while ethylene emanation in Senia is not altered by submergence, Bomba seedlings emanate more ethylene upon de-submergence, associated with enhanced expression of the ethylene biosynthesis gene OsACS5. The cultivar Senia thus allows the possibility of clarifying the role of ethylene and other factors as triggers of GA biosynthesis enhancement in rice seedlings under submergence.

  13. Anatomia foliar e potencial hídrico na tolerância de cultivares de café ao estresse hídrico Leaf anatomy and water potential in the coffee cultivars tolerance to water stress

    Directory of Open Access Journals (Sweden)

    Luiz Antônio Batista

    2010-09-01

    Full Text Available A cultura do café é de expressiva importância no mercado internacional, com uma produção anual de cerca de 120 milhões de sacas beneficiadas e no Brasil, é responsável pela geração de mais de dez milhões de empregos diretos e indiretos. O estresse hídrico é um fator ambiental que pode ser extremamente prejudicial para a cultura do café, sendo que a seleção de cultivares tolerantes é de grande importância, principalmente diante da expansão da cafeicultura brasileira para áreas consideradas marginais para o cultivo do café por estarem sujeitos à deficiência hídrica. Nesse trabalho foram avaliadas 15 cultivares de Coffea arabica quanto ao status hídrico e às características da estrutura interna das folhas, verificando quais dessas cultivares são potencialmente mais eficientes em tais condições. Dentre as cultivares estudadas destacam-se a Bourbon Amarelo e a Catimor como potencialmente mais eficientes em condições de estresse hídrico por possuírem: maior potencial hídrico, cutícula mais espessa, maior proporção de parênquima paliçádico, maior espessura da nervura central e maior densidade estomática em relação às demais variáveis. Dessa forma, as cultivares Bourbon Amarelo e Catimor são potencialmente mais eficientes na redução da transpiração, fotossíntese e translocação de fotossintatos em condições de estresse hídrico, sendo mais indicadas ao plantio em regiões sujeitas a maiores déficits hídricos em relação às demais cultivares estudadas.Coffee yield has a great importance to the international market with a 120 million 60-kilogram bags and in Brazil it produces 10 million of direct and indirect jobs. Water stress is one of the most important factors to the crop yield, and so, the selection of tolerant cultivars is of great importance in the places under water stress. In this work, 15 Coffea arabica cultivars were evaluated about the water status and leaf anatomy to indicate the most

  14. Improving the lean muscle color of dark-cutting beef by aging, antioxidant-enhancement, and modified atmospheric packaging.

    Science.gov (United States)

    Wills, K M; Mitacek, R M; Mafi, G G; VanOverbeke, D L; Jaroni, D; Jadeja, R; Ramanathan, R

    2017-12-01

    The objective was to evaluate the effects of wet-aging, rosemary-enhancement, and modified atmospheric packaging on the color of dark-cutting beef during simulated retail display. No-roll dark-cutting strip loins ( = 12; pH > 6.0) were selected from a commercial packing plant within 3 d postharvest. Using a balanced incomplete block design, dark-cutting loins were sectioned in half, and assigned to 1 of 3 aging periods: 7, 14, or 21 d. After respective aging, each aged section was divided into 3 equal parts, and randomly assigned to 1 of 3 enhancement treatments: nonenhanced dark-cutting, dark-cutter enhanced with 0.1% rosemary, and dark-cutter enhanced with 0.2% rosemary. Following enhancement, steaks were randomly assigned to 1 of 3 packaging treatments: high-oxygen modified atmospheric packaging (HiOx-MAP; 80% O and 20% CO), carbon monoxide modified atmospheric packaging (CO-MAP; 0.4% CO, 69.6% N, and 30% CO), and polyvinyl chloride overwrap (PVC; 20% O). Instrumental and visual color measurements were recorded during 5 d simulated retail display. Lipid oxidation was determined utilizing the thiobarbituric acid reactive substances (TBARS) method. There was a significant packaging × enhancement × display time interaction for values and chroma ( 0.001). On d 0 of display, dark-cutting steaks enhanced with 0.1% and 0.2% rosemary and packaged in HiOx-MAP had greater ( 0.001) values and chroma than other dark-cutting packaging/enhancement treatments. A significant packaging × enhancement × display time interaction resulted for values ( 0.001). Dark-cutting steaks enhanced with 0.2% rosemary and packaged in HiOx-MAP was lighter ( 0.001; greater values) than other dark-cutting treatments on d 5 of display. There were no differences ( 0.34) in discoloration scores on d 5 among different dark-cutting treatments when steaks were packaged in HiOx- and CO-MAP. There was an aging period × enhancement × packaging interaction ( cutting steaks enhanced with 0.2% rosemary

  15. Comparação de métodos de agrupamento para o estudo da divergência genética em cultivares de feijão Comparison of cluster methods for the study of genetic diversity in common bean cultivars

    Directory of Open Access Journals (Sweden)

    Alberto Cargnelutti Filho

    2008-11-01

    plant, number of seeds per pod, weight of 100 grains, final population of plants, number of days of the emergency to flowering, number of days of the emergency to harvest, height of first pod insertion and height of the final pod insertion. Clusters based on the standardized average euclidian distance are distinct from those formed on the basis of Mahalanobis generalized distance. The Tocher's method and hierarchical methods of the single linkage, Ward, complete linkage, median, the average linkage within the group and average linkage between groups, based on the Mahalanobis generalized distance form agreement cluster. The cultivar 'Iraí' presents distinct behavior from other cultivars.

  16. Specific cut-off points for waist circumference and waist-to-height ratio as predictors of cardiometabolic risk in Black subjects: a cross-sectional study in Benin and Haiti

    Directory of Open Access Journals (Sweden)

    EL Mabchour A

    2015-10-01

    Full Text Available Asma EL Mabchour,1 Hélène Delisle,1 Colette Vilgrain,2 Philippe Larco,2 Roger Sodjinou,3 Malek Batal1 1Transition Nutritionnelle (TRANSNUT, WHO Collaborating Centre on Nutrition Changes and Development, Department of Nutrition, Faculty of Medicine, University of Montreal, Montreal, QC, Canada; 2Haitian Foundation for Diabetes and Cardiovascular Diseases (FHADIMAC, Port-au-Prince, Haiti; 3West Africa Health Organization (WAHO, Bobo-Dioulasso, Burkina Faso Purpose: Waist circumference (WC and waist-to-height ratio (WHtR are widely used as indicators of abdominal adiposity and the cut-off values have been validated primarily in Caucasians. In this study we identified the WC and WHtR cut-off points that best predicted cardiometabolic risk (CMR in groups of African (Benin and African ancestry (Haiti Black subjects. Methods: This cross-sectional study included 452 apparently healthy subjects from Cotonou (Benin and Port-au-Prince (Haiti, 217 women and 235 men from 25 to 60 years. CMR biomarkers were the metabolic syndrome components. Additional CMR biomarkers were a high atherogenicity index (total serum cholesterol/high density lipoprotein cholesterol ≥4 in women and ≥5 in men; insulin resistance set at the 75th percentile of the calculated Homeostasis Model Assessment index (HOMA-IR; and inflammation defined as high-sensitivity C-reactive protein (hsCRP concentrations between 3 and 10 mg/L. WC and WHtR were tested as predictors of two out of the three most prevalent CMR biomarkers. Receiver operating characteristic (ROC curves, Youden's index, and likelihood ratios were used to assess the performance of specific WC and WHtR cut-offs. Results: High atherogenicity index (59.5%, high blood pressure (23.2%, and insulin resistance (25% by definition were the most prevalent CMR biomarkers in the study groups. WC and WHtR were equally valid as predictors of CMR. Optimal WC cut-offs were 80 cm and 94 cm in men and women, respectively, which is exactly

  17. Calculation of mass transfer in the remote cutting of metals by radiation of a high-power repetitively pulsed CO2 laser

    International Nuclear Information System (INIS)

    Gladush, G G; Rodionov, N B

    2002-01-01

    The mechanism of remote cutting of steel plates by radiation of a high-power repetitively pulsed CO 2 laser is theoretically studied. The models of melt removal by the gravity force and the recoil pressure of material vapour are proposed and the sufficient conditions for the initiation of cutting are determined. A numerical model of a thermally thin plate was employed to describe the cutting for large focal spots. (interaction of laser radiation with matter. laser plasma)

  18. Establishment of an Efficient and Reproducible Regeneration System for Potato Cultivars Grown in Pakistan

    International Nuclear Information System (INIS)

    Iqbal, A.; Rizwan, A.; Mukhtar, Z.; Mansoor, S.; Asad, S.; Khalid, Z. M.

    2016-01-01

    The present study was carried out to assess the effect of growth regulators in three different combinations on mass propagation of currently grown three potato cultivars cv. Desiree, Kuroda and Cardinal. Varietal response on In vitro regeneration under different hormonal combinations. For callus induction, internodes of potato cultivars were cultured on modified Murashige and Skoog (MS) medium, added with different growth hormonal combinations. Callusing frequency for all these treatments and cultivars were recorded and in callus induction medium (CIM1) explants showed significantly higher callus formation as compared to two other combinations. For shoot induction, calli were cultured on Murashige and Skoog (MS) modified medium, supplemented with different hormonal combinations. Shoot induction medium (SIM3) gave best shoot induction frequency as compared to other media combinations. On the same media, an average number of shoots per explant were obtained for cultivar Desiree which is significantly different from the other two media combinations. Overall, the In vitro regeneration and multiplication potential was highest in the variety Cardinal followed by Kuroda and Desiree. The interaction between different hormonal combinations and varietal response for all the parameters showed significant differences. (author)

  19. Predicting human height by Victorian and genomic methods.

    Science.gov (United States)

    Aulchenko, Yurii S; Struchalin, Maksim V; Belonogova, Nadezhda M; Axenovich, Tatiana I; Weedon, Michael N; Hofman, Albert; Uitterlinden, Andre G; Kayser, Manfred; Oostra, Ben A; van Duijn, Cornelia M; Janssens, A Cecile J W; Borodin, Pavel M

    2009-08-01

    In the Victorian era, Sir Francis Galton showed that 'when dealing with the transmission of stature from parents to children, the average height of the two parents, ... is all we need care to know about them' (1886). One hundred and twenty-two years after Galton's work was published, 54 loci showing strong statistical evidence for association to human height were described, providing us with potential genomic means of human height prediction. In a population-based study of 5748 people, we find that a 54-loci genomic profile explained 4-6% of the sex- and age-adjusted height variance, and had limited ability to discriminate tall/short people, as characterized by the area under the receiver-operating characteristic curve (AUC). In a family-based study of 550 people, with both parents having height measurements, we find that the Galtonian mid-parental prediction method explained 40% of the sex- and age-adjusted height variance, and showed high discriminative accuracy. We have also explored how much variance a genomic profile should explain to reach certain AUC values. For highly heritable traits such as height, we conclude that in applications in which parental phenotypic information is available (eg, medicine), the Victorian Galton's method will long stay unsurpassed, in terms of both discriminative accuracy and costs. For less heritable traits, and in situations in which parental information is not available (eg, forensics), genomic methods may provide an alternative, given that the variants determining an essential proportion of the trait's variation can be identified.

  20. Pessegueiro: cultivar BRS kampai

    Directory of Open Access Journals (Sweden)

    Maria do Carmo Bassols Raseira

    2010-12-01

    Full Text Available RESUMO O programa de Melhoramento Genético de Pessegueiros da Embrapa Clima Temperado tem, entre seus objetivos, a obtenção de cultivares produtoras de frutas para consumo in natura, com características que satisfaçam às exigências dos consumidores. Alguns dos grandes centros consumidores, como é o caso de São Paulo e Curitiba, preferem pêssegos de polpa branca e sabor doce. A cultivar BRS Kampai, obtida de um cruzamento entre 'Chimarrita' e 'Flordaprince', alia a baixa necessidade em frio, o que é uma vantagem em regiões subtropicais, à boa aparência, com sabor superior a qualquer um dos parentais. A colheita dos frutos desta cultivar inicia-se geralmente, em meados de novembro, em Pelotas-RS (em Atibaia, São Paulo, inicia-se na segunda quinzena de outubro, poucos dias antes das cultivares Rubimel (polpa amarela e Premier (polpa branca, sendo ótima substituta para esta última.

  1. Tolérance de quelques cultivars de manioc (Manihot esculenta Crantz et de l'espèce sauvage (Manihot glaziovii à la mosaïque virale africaine et à la cercosporiose du manioc

    Directory of Open Access Journals (Sweden)

    Ongono, YSB.

    2007-01-01

    Full Text Available Tolerance of some Cassava Cultivars (Manihot esculenta Crantz and the Wild Species (M. Glaziovii to Cassava Mosaic Virus Disease and Brown Leaf Spot. A study of the tolerance of three cultivars of Manihot esculenta Crantz (one local cultivar, Alot-Bikon, and two improved: IITA 8034, IITA 8061 and wild cassava (M. glaziovii collected from the Mbam and Kim forest (Cameroon towards the cassava mosaic virus disease (CMVD and brown leaf spot (BLS, was carried out in Yaoundé. CMVD was studied under natural conditions, whereas BLS was inoculated through a solution of Cercospora henningsii in concentration around 20 × 10² conidia/ml. Sixteen weeks after planting the cuttings, M. glaziovii plants were tallest (156 cm, whereas highest number of leaves (113 was obtained on the IITA 8061 cultivar. The lowest infection degrees by CMVD (17.2% and BLS (2.7% were registered on the wild species. Consequently, wild species seem to be more tolerant of the diseases studied. IITA 8061 cultivar is moderately resistant to CMVD (28.9% and rather resistant to BLS (7.8%. Cultivars IITA 8034 and the local variety are more sensitive respectively to CMVD (53.1 and 54.5% and BLS (18.8 and 32.8%. The highest yield in tubers was obtained from cultivar IITA 8061 (34.5 t/ha followed by IITA 8034 (32.1 t/ha and local cultivar, Alot-Bbikon (15.6 t/ha. These results show that the tolerance of cassava cultivars to disease has a large influence on tuber yield.

  2. Desenvolvimento de cultivares de antúrio IAC como plantas de vaso no norte do Paraná Performance of Anthurium's cultivars as an ornamental vessel plant in northern Paraná

    Directory of Open Access Journals (Sweden)

    Lúcia Sadayo Assari Takahashi

    2009-09-01

    Full Text Available O gênero Anthurium Schott. (Araceae compreende mais de 600 espécies. Todas são ornamentais e se destacam pela beleza da folhagem. A espécie Anthurium andraeanum Lind. tem a preferência dos consumidores como planta ornamental devido ao tamanho e colorido de suas espatas. O objetivo do trabalho foi avaliar o desenvolvimento, em vaso, de cinco cultivares de A. andraeanum em Londrina, Norte do Paraná. As cultivares 'Parakanã', 'Terena', 'Apalai', 'Ianomami' e 'Rubi' foram produzidas por meio de micropropagação e selecionadas pelo Instituto Agronômico (IAC. O trabalho foi desenvolvido em estufa tipo arco com 80% de sombreamento obtido por tela de polipropileno de cor preta. Foi plantada uma muda por vaso plástico com volume de quatro litros usando como substrato fibra de coco tipo 80. A avaliação do desempenho comparativo foi iniciada, a partir do transplante das mudas. O comprimento do pecíolo, o número de folhas, a largura e o comprimento das espatas e o comprimento da haste floral foram avaliados mensalmente. Houve aumento na altura e no número de folhas das plantas nos três anos de cultivo. As cultivares 'Parakanã', 'Rubi', 'Terena' e 'Apalai' floresceram e tiveram maior desenvolvimento vegetativo sendo recomendadas para o cultivo em vasos no Norte do Paraná.The genus Anthurium Schott. (Araceae comprehends more than 600 species. All species are ornamental and are distinguished by the beauty of their foliage. The Anthurium andraeanum Lind. has the preference of the public as an ornamental plant because of the color and size of its spathes. The objective of this work was to evaluate of five cultivars of A. andraeanum, as vessel plant, in the northern region of Paraná State. The cultivars 'Parakanã', 'Terena', 'Apalai', 'Ianomami' and 'Rubi' produced by micropropagation by Instituto Agronômico (IAC were analyzed. The study was conducted at greenhouse with 80% of shade given by a black colored polypropylene screen. One seedling

  3. Mycelial compatibility and aggressiveness of Sclerotinia sclerotiorum isolates from Brazil and the United States

    Directory of Open Access Journals (Sweden)

    Lucimara Junko Koga

    2014-04-01

    Full Text Available The objective of this work was to evaluate the genetic diversity among Sclerotinia sclerotiorum isolates from Brazil and the USA, assess their aggressiveness variability, and verify the existence of an isolate-cultivar interaction. Isolate variability was determined by mycelial compatibility grouping (MCG, and isolate aggressiveness by cut-stem inoculations of soybean cultivars. Two experiments for MCGs and two for aggressiveness were conducted with two sets of isolates. The first set included nine isolates from the same soybean field in Brazil and nine from the Midwest region of the USA. The second set included 16 isolates from several regions of Brazil and one from the USA. In the first set, 18 isolates formed 12 different MCGs. In the second set, 81% of the isolates from Brazil grouped into a single MCG. No common MCGs were observed among isolates from Brazil and the USA. The isolates showed aggressiveness differences in the first set, but not in the second. Although aggressiveness differed in the first set, soybean cultivars and isolates did not interact significantly. Cultivar rank remained the same, regardless of the genetic diversity, aggressiveness difference, and region or country of origin of the isolate. Results from screening of soybean cultivars, performed by the cut-stem method in the USA, can be used as reference for researchers in Brazil.

  4. Interpreting genotype × environment interactions for grain yield of rainfed durum wheat in Iran

    Directory of Open Access Journals (Sweden)

    Reza Mohammadi

    2015-12-01

    Full Text Available Clustering genotype × environment (GE interactions and understanding the causes of GE interactions are among the most important tasks in crop breeding programs. Pattern analysis (cluster and ordination techniques was applied to analyze GE interactions for grain yield of 24 durum wheat (Triticum turgidum L. var. durum genotypes (breeding lines and old and new cultivars along with a popular bread wheat (Triticum aestivum cultivar grown in 21 different rainfed environments during the 2010–2013 cropping seasons. To investigate the causes of GE interaction, several genotypic and environmental covariables were used. In a combined ANOVA, environment was the predominant source of variation, accounting for 81.2% of the total sum of squares (TSS, and the remaining TSS due to the GE interaction effect was almost seven times that of the genetic effect. Cluster analysis separated the environments into four groups with similar discriminating ability among genotypes, and genotypes into five groups with similar patterns in yield performance. Pattern analysis confirmed two major environmental clusters (cold and warm, and allowed the discrimination and characterization of genotype adaptation. Within the cold-environment cluster, several subclusters were identified. The breeding lines were most adapted to moderate and warm environments, whereas the old varieties were adapted to cold environments. The results indicated that winter rainfall and plant height were among the environmental and genotypic covariables, respectively, that contributed most to GE interaction for grain yield in rainfed durum wheat.

  5. Desempenho de cultivares de alface crespa em dois ambientes de cultivo em sistema hidropônico Performance of lettuce cultivars grown in two environments, in the NFT hydroponic system

    Directory of Open Access Journals (Sweden)

    SF Blat

    2011-03-01

    Full Text Available Este trabalho foi desenvolvido em Ribeirão Preto-SP, de 06/02 a 07/04 de 2006. O objetivo foi avaliar o desempenho de cinco cultivares de alface (Pira Roxa, Belíssima, Locarno, Crespona Gigante e Verônica em dois ambientes de cultivo (casa de vegetação climatizada e não climatizada em sistema hidropônico NFT. O delineamento experimental foi em blocos casualizados para cada ambiente com três repetições sendo cinco cultivares. Os ambientes foram comparados por meio de análise conjunta. Avaliaram-se a massa fresca e seca da parte aérea, massas fresca e seca do caule, massa fresca e seca da raiz, número de folhas maiores que 10 cm e número total de folhas. Não houve efeito significativo da interação cultivares e ambientes, demonstrando que as cultivares tiveram comportamento similar em ambos os ambientes.This research was carried out in Ribeirão Preto, São Paulo State, Brazil, from February to April, 2006. The performance of five lettuce cultivars (Pira Roxa, Belíssima, Locarno, Crespona Gigante and Verônica was evaluated, growing the plants in two environments (conventional and acclimatized greenhouse in hydroponic system NFT. A randomized-block experimental design was used for each environment, with three replications and five cultivars. The environments were compared through joint analysis. Evaluations were done for fresh and dry mater of the aboveground part, stem, and roots; number of leaves larger than 10 cm and total number of leaves. The cultivars Crespona Gigante and Verônica were prominent with regard to green and dry mass of the aboveground part, leaves, and roots, as well as to the number of leaves larger than 10 cm. The interaction cultivar x environment was not significant, demonstrating that the cultivars had similar behavior in both environments.

  6. Cultivar Variation in Hormonal Balance Is a Significant Determinant of Disease Susceptibility to Xanthomonas campestris pv. campestris in Brassica napus

    Directory of Open Access Journals (Sweden)

    Md. Tabibul Islam

    2017-12-01

    Full Text Available This study aimed to directly elucidate cultivar variation in disease susceptibility and disease responses in relation to hormonal status in the interaction of Brassica napus cultivars and Xanthomonas campestris pv. campestris (Xcc, the causal agent of black rot disease. Fully expanded leaves of six B. napus cultivars (cvs. Capitol, Youngsan, Saturnin, Colosse, Tamra, and Mosa were inoculated with Xcc. At 14 days post-inoculation with Xcc, cultivar variation in susceptibility or resistance was interpreted with defense responses as estimated by redox status, defensive metabolites, and expression of phenylpropanoid synthesis-related genes in relation to endogenous hormonal status. Disease susceptibility of six cultivars was distinguished by necrotic lesions in the Xcc-inoculated leaves and characterized concurrently based on the higher increase in reactive oxygen species and lipid peroxidation. Among these cultivars, as the susceptibility was higher, the ratios of abscisic acid (ABA/jasmonic acid (JA and salicylic acid (SA/JA tended to increase with enhanced expression of SA signaling regulatory gene NPR1 and transcriptional factor TGA1 and antagonistic suppression of JA-regulated gene PDF 1.2. In the resistant cultivar (cv. Capitol, accumulation of defensive metabolites with enhanced expression of genes involved in flavonoids (chalcone synthase, proanthocyanidins (anthocyanidin reductase, and hydroxycinnamic acids (ferulate-5-hydroxylase biosynthesis and higher redox status were observed, whereas the opposite results were obtained for susceptible cultivars (cvs. Mosa and Tamra. These results clearly indicate that cultivar variation in susceptibility to infection by Xcc was determined by enhanced alteration of the SA/JA ratio, as a negative regulator of redox status and phenylpropanoid synthesis in the Brasica napus–Xcc pathosystem.

  7. RADISH CULTIVARS BRED AT VNIISSOK AND THEIR USE

    Directory of Open Access Journals (Sweden)

    M. I. Fedorova

    2016-01-01

    Full Text Available On the base of comparative assessment and average data estimation from 2010 to 2015, the characteristics of 11 cultivars bred at VNIISSOK were described regarding yield capacity and its components, variation, interdependencies at two sowing terms winter,spring time, direction of selection and cultivar uses at cultivar maintaining breeding program. Cultivar 'Koroleva Margo' is rather used in breeding program for yield capacity and taste qualities. Cultivar 'Sonata' is a source of such features as early maturity, valuable biochemical content and low nitrate accumulation. Cultivar 'Sofit' is known to bear early maturity and simultaneous seed maturation. 'Ariya' is a source of cylindrical root shape and early maturation. Cultivar 'Teplichnyi Gribovskyi' is used in breeding program for early maturation and simultaneous seed maturation. Cultivar 'Feya' bearsresistance to bolting and valuable biochemical substances. Cultivar 'Variant' has such features as root density, ability to grow under low lighting, short-term storability.  Purple-red with white tips is a newmade cultivar 'Mavr' suitable for breeding program for valuable biochemical content, unusual root color, also bearing male sterile forms (MS for heterosis hybrid breeding. Out of all cultivars regarded, 'Mokhovskiy' is only a genetic source to breed radish forms with edible leaves. The positive weak dependence was revealed between cultivar biochemical characteristics, root weight, dry matter  content, and nitrate content; whereas the positive middle dependence is revealed with sugar contents and negative dependence with ascorbic acid content. According to  iochemical characteristics, the best cultivar population as 'Ariya', 'Sonata' (ascorbic acid; Mavr, Sonata, Variant (dry matter, sugars have been chosen. Cultivars 'Koroleva Margo', Pheya, Sonata, Sophit, Mokhovskiy are the initial breeding accessions for selection of new cultivar population, MS and MF lines needed for heterosis.

  8. Stem rust seedling resistance genes in Ethiopian wheat cultivars ...

    African Journals Online (AJOL)

    Thirty durum wheat (19 commercial cultivars and 11 breeding lines) and 30 bread wheat (20 commercial cultivars and 10 breeding lines) were tested for gene postulation. Stem rust infection types produced on wheat cultivars and breeding lines by ten Pgt races was compared with infection types produced on 40 near ...

  9. Yield and quality of strawberry cultivars Produtividade e qualidade de cultivares de morangueiro

    Directory of Open Access Journals (Sweden)

    Luis Eduardo C Antunes

    2010-06-01

    Full Text Available The strawberry cultivation is an important economic activity in the Rio Grande do Sul State, Brazil, however the number of offered cultivars to the growers is reduced. The yield and quality of strawberry (Fragaria x ananassa Duch. cultivars Camarosa, Galexia, Earlibrite, Festival, Plarionfre and Sabrosa was evaluated under the climatic conditions of Pelotas, Rio Grande do Sul State. We determined the number, mass, total soluble solids (TSS ºBrix, total titratable acidity (TTA, antocianin level and fresh fruits produced in an experimental unit. We also determined the production of fruits per hectare and per plant. The statistical design used in the experiment was of completely randomized blocks with 6 treatments (cultivars and 4 replicates where the experimental unit was composed of 8 plants. The harvest began in the first half of August, extending to the second half of December, totalling 20 weeks. Plarionfre, Earlibrite and Festival cultivars showed higher production from the first half of October until the end of the first half of November. Camarosa reached higher productivity, mass of plants and fruit weight. There were no differences between the evaluated cultivars in the levels of TSS, antocianin, ATT and pH during the period of evaluation.No estado do Rio Grande do Sul o cultivo do morangueiro é uma atividade econômica importante, entretanto o número de cultivares disponíveis no mercado é bastante reduzido. Assim buscou-se com este trabalho avaliar a produtividade e a qualidade dos frutos de cultivares de morangueiro (Fragaria x ananassa Duch., Camarosa, Galexia, Earlibrite, Festival, Plarionfre e Sabrosa, cultivados nas condições climáticas e de solo do município de Pelotas, RS. Determinaram-se, o número, massa fresca e teor de sólidos solúveis totais (SST (expresso em ºBrix, acidez total titulável (ATT (expresso em % de ácido cítrico e teor de antocianinas, dos frutos produzidos por unidade experimental. Determinou

  10. Effect of alternative prey on development and consumption of Orius insidiosus (Say) (Hemiptera, Anthocoridae) and oviposition behavior on chrysantemum cultivars

    International Nuclear Information System (INIS)

    Soglia, Maria da Conceicao M.; Bueno, Vanda Helena Paes; Carvalho, Livia Mendes

    2007-01-01

    This work aimed to evaluate the development time and the consumption of Orius insidiosus (Say, 1832) feeding on Aphis gossypii Glover, 1877 as well as its oviposition behavior on two chrysanthemum cut cultivars. The trials were conducted in climatic chamber at 25 ± 1 deg C, RH 70 ± 10% and 12h photo phase. Nymphs of the predator, less than 24h old, were kept individually in petri dishes (5cm) with 20 nymphs of A. gossypii (first, second and third instar) on leaf disc (4 cm) of each cultivar ('White Reagan' and 'Yellow Snowdon') in a layer of agar-water (1%). Petiole of each chrysanthemum cultivar as oviposition substrate was evaluated and the females were feeding on eggs of Anagasta kuehniella (Zeller, 1879). The predator complete its development feeding on A. gossypii kept in both cultivars. The duration of nymphal phase of O. insidiosus were 21.1 and 18.3 days on 'White Reagan' and 'Yellow Snowdon', respectively. The consumption of the females of O. insidiosus was higher (P<0.01) on A. gossypii in 'White Reagan' (2.63 nymphs) compared to the consumption in 'Yellow Snowdon' (0.7 nymphs). Females of O. insidiosus oviposited in petiole of both cultivars with 22.5 and 23.3 eggs/female on 'White Reagan' and 'Yellow Snowdon', respectively. Release of O. insidiosus on chrysanthemum crops could be important to decrease the A. gossypii population, as the predator completes its development having this aphid as prey, and the chrysanthemum cultivars offer conditions to colonization and establishment of O. insidiosus. (author)

  11. Sensory profile of eleven peach cultivars Perfil sensorial de onze cultivares de pêssegos

    Directory of Open Access Journals (Sweden)

    Francine Lorena Cuquel

    2012-03-01

    Full Text Available The goal of this study was to evaluate the sensory profile of eleven peach cultivars grown in an experimental orchard located in the city of Lapa (PR, Brazil in two seasons. The peach cultivars analyzed were Aurora I, Chimarrita, Chiripá, Coral, Eldorado, Granada, Leonense, Maciel, Marli, Premier, and Vanguarda. The sensory analysis was performed by previously trained panelists; 20 of them in the first season and 10 in the second season. The sensory evaluation was performed using Quantitative Descriptive Analysis, in which the following attributes were measured: appearance, aroma, flesh color, flesh firmness, flavor, and juiciness. The results showed preference for sweet, soft, and juicy fruits. Chimarrita, Chiripá, and Coral fruits showed better sensorial performance than the other peach cultivars. It was also verified that the analysis of the attributes aroma, flesh firmness, and flavor is enough for performing the sensory profile of peach fruits for in natura consumption.Este trabalho teve como objetivo avaliar o perfil sensorial de onze cultivares de pêssego produzidos em duas safras em um pomar experimental implantado na Lapa (PR, Brasil. Os cultivares analisados foram Aurora I, Chimarrita, Chiripá, Coral, Eldorado, Granada, Leonense, Maciel, Marli, Premier e Vanguarda. As análises sensoriais foram realizadas por julgadores previamente treinados, sendo 20 julgadores na primeira safra e 10 na segunda. O método de avaliação empregado foi a Análise Descritiva Quantitativa na qual foram mensurados os atributos aparência, aroma, cor de polpa, firmeza de polpa, sabor e suculência dos frutos. Os resultados obtidos demonstraram a preferência por frutos de sabor adocicado, com polpa macia e suculenta. Os cultivares Chimarrita, Chiripá e Coral obtiveram o melhor desempenho nas análises sensoriais. Foi verificado ainda que os atributos aroma, firmeza de polpa e sabor são considerados suficientes para a avaliação do perfil sensorial de

  12. Effect of alternative prey on development and consumption of Orius insidiosus (Say) (Hemiptera, Anthocoridae) and oviposition behavior on chrysantemum cultivars; Efeito da presa alternativa no desenvolvimento e consumo de Orius insidiosus (Say) (Hemiptera, Anthocoridae) e comportamento de oviposicao em cultivares de crisantemo

    Energy Technology Data Exchange (ETDEWEB)

    Soglia, Maria da Conceicao M. [Universidade Federal da Bahia (UFBA), Cruz das Almas, BA (Brazil). Centro de Ciencias Agrarias e Ambientais], e-mail: mcsoglia@yahoo.com.br; Bueno, Vanda Helena Paes; Carvalho, Livia Mendes [Universidade Federal de Lavras (UFLA), MG (Brazil). Dept. de Entomologia], e-mail: vhpbueno@ufla.br

    2007-10-15

    This work aimed to evaluate the development time and the consumption of Orius insidiosus (Say, 1832) feeding on Aphis gossypii Glover, 1877 as well as its oviposition behavior on two chrysanthemum cut cultivars. The trials were conducted in climatic chamber at 25 {+-} 1 deg C, RH 70 {+-} 10% and 12h photo phase. Nymphs of the predator, less than 24h old, were kept individually in petri dishes (5cm) with 20 nymphs of A. gossypii (first, second and third instar) on leaf disc (4 cm) of each cultivar ('White Reagan' and 'Yellow Snowdon') in a layer of agar-water (1%). Petiole of each chrysanthemum cultivar as oviposition substrate was evaluated and the females were feeding on eggs of Anagasta kuehniella (Zeller, 1879). The predator complete its development feeding on A. gossypii kept in both cultivars. The duration of nymphal phase of O. insidiosus were 21.1 and 18.3 days on 'White Reagan' and 'Yellow Snowdon', respectively. The consumption of the females of O. insidiosus was higher (P<0.01) on A. gossypii in 'White Reagan' (2.63 nymphs) compared to the consumption in 'Yellow Snowdon' (0.7 nymphs). Females of O. insidiosus oviposited in petiole of both cultivars with 22.5 and 23.3 eggs/female on 'White Reagan' and 'Yellow Snowdon', respectively. Release of O. insidiosus on chrysanthemum crops could be important to decrease the A. gossypii population, as the predator completes its development having this aphid as prey, and the chrysanthemum cultivars offer conditions to colonization and establishment of O. insidiosus. (author)

  13. Ann modeling of kerf transfer in Co2 laser cutting and optimization of cutting parameters using monte carlo method

    Directory of Open Access Journals (Sweden)

    Miloš Madić

    2015-01-01

    Full Text Available In this paper, an attempt has been made to develop a mathematical model in order to study the relationship between laser cutting parameters such as laser power, cutting speed, assist gas pressure and focus position, and kerf taper angle obtained in CO2 laser cutting of AISI 304 stainless steel. To this aim, a single hidden layer artificial neural network (ANN trained with gradient descent with momentum algorithm was used. To obtain an experimental database for the ANN training, laser cutting experiment was planned as per Taguchi’s L27 orthogonal array with three levels for each of the cutting parameters. Statistically assessed as adequate, ANN model was then used to investigate the effect of the laser cutting parameters on the kerf taper angle by generating 2D and 3D plots. It was observed that the kerf taper angle was highly sensitive to the selected laser cutting parameters, as well as their interactions. In addition to modeling, by applying the Monte Carlo method on the developed kerf taper angle ANN model, the near optimal laser cutting parameter settings, which minimize kerf taper angle, were determined.

  14. Golan Heights Groundwater Systems: Separation By REE+Y And Stable Isotopes

    Science.gov (United States)

    Siebert, C.; Geyer, S.; Knoeller, K.; Roediger, T.; Weise, S.; Dulski, P.; Moeller, P.; Guttman, J.

    2008-12-01

    In a semi-arid to arid country like Israel, all freshwater resources are under (over-) utilization. Particularly, the Golan Heights rank as one of the most important extraction areas of groundwater of good quality and quantity. Additionally the mountain range feed to a high degree the most important freshwater reservoir of Israel, the Sea of Galilee. Hence, knowing the sources and characters of the Golan Heights groundwater systems is an instantaneous demand regarding sustainable management and protection. Within the "German-Israeli-Jordanian-Palestinian Joint Research Program for the Sustainable Utilisation of Aquifer Systems", hundreds of water samples were taken from all over the Jordan-Dead Sea rift-system to understand groundwater flow-systems and salinisation. For that purpose, each sample was analysed for major and minor ions, rare earth elements including yttrium (REY) and stable isotopes of water (d18O, d2H). The REY distribution in groundwater is established during infiltration by the first water-rock interaction and consequently reflects the leachable components of sediments and rocks of the recharge area. In well- developed flow-systems, REY are adsorbed onto pore surfaces are in equilibrium with the percolating groundwater, even if the lithology changes (e.g. inter-aquifer flow). Thus, groundwater sampled from wells and springs still show the REY distribution pattern established in the recharge area. Since high temperatures do not occur in Golan Heights, d2H and d18O are less controlled by water-rock interaction than by climatic and geomorphological factors at the time of replenishment. Applying the REY signature as a grouping criterion of groundwaters, d18O vs. d2H plots yield a new dimension in interpreting isotope data. The combined use of hydrochemical and isotopic methods enabled us to contain the areas of replenishment and the flow-paths of all investigated groundwater in the Golan Heights. Despite location, salinity or temperature of spring or

  15. Differential leaf gas exchange performance of mango cultivars infected by different isolates of Ceratocystis fimbriata

    Directory of Open Access Journals (Sweden)

    Wilka Messner da Silva Bispo

    2016-04-01

    Full Text Available ABSTRACT Caused by the vascular fungus Ceratocystis fimbriata, mango wilt is considered to be one of the most serious threats in mango-producing regions worldwide. However, changes in leaf gas exchange level and the mechanisms underlying host responses to this fungal infection remain poorly described. This study aimed to evaluate potential changes in the leaf gas exchange of different mango cultivars (Ubá, Espada, Haden and Tommy Atkins in response to two Brazilian isolates of C. fimbriata (CEBS15 and MSAK16 to non-invasively assess cultivar variability in relation to the basal level of resistance to mango wilt. Both isolates, regardless of the cultivar, caused reductions in stomatal conductance and, thus, a reduction in CO2 assimilation via diffusive limitations. Taking into account the full length of the internal lesion and the radial colonization of the stem tissues, both isolates showed equivalent aggressiveness when inoculated into the Haden and Tommy Atkins cultivars. Conversely, when compared to the CEBS15 isolate of C. fimbriata, the MSAK16 isolate was more aggressive in cv. Espada and less aggressive in cv. Ubá.

  16. Cutting techniques of reinforced concrete by wire sawing

    International Nuclear Information System (INIS)

    Miyao, Hidehiko; Komatsu, Junji; Kamiyama, Yoshinori; Yasoshima, Harunori; Kukino, Yoshinori; Yamamoto, Yuichi; Miyazaki, Takashi; Aritomi, Masanori

    1995-01-01

    The Research Association for Nuclear Facility Decommissioning (RANDEC) has been carrying out demonstration tests to improve current technologies for decommissioning. The conceptual dismantling system has been studied and basic cutting tests have been carried out by wire sawing. In terms of waste management and dismantling efficiency, the diamond wire saw cutting method has advantages for cutting radioactive concrete in large blocks. A conceptual design for a dismantling system for various concrete shieldings of nuclear facilities has been developed and diamond wire sawing has been designed and manufactured. The basic cutting tests by wire sawing have been carried out to obtain quantitative data, in addition to the conceptual design of a dismantling system for biological shielding of various power reactors (PWR, BWR, GCR) and cell walls of nuclear fuel cycle facilities. On the basis of the conceptual dismantling system and quantitative cutting performance data, wire sawing equipment has been manufactured for use in nuclear facilities. This study was performed on consignment for the Science and Technology Agency of Japan. (author)

  17. Características e desempenho agronômico no Paraná da cultivar de trigo BRS 220 Characteristics and agronomic performance in Paraná State of wheat cultivar BRS 220

    Directory of Open Access Journals (Sweden)

    Manoel Carlos Bassoi

    2005-02-01

    Full Text Available A cultivar BRS 220, indicada para todas as regiões tritícolas do Paraná, apresenta elevado potencial de rendimento, ampla adaptação e é dotada de força de glúten que a inclui na classe de trigo pão. É resistente às ferrugens e moderadamente resistente às manchas foliares, à brusone e ao vírus-do-mosaico. É moderadamente suscetível à giberela e ao oídio. Apresenta ciclo de precoce a médio, altura média de planta, boa resistência ao acamamento e moderada tolerância ao alumínio tóxico. É moderadamente tolerante à debulha e suscetível à germinação pré-colheita. Apresentou, nos cinco anos de experimentação, média de rendimento de grãos da ordem de 4.853 kg ha-1, na região 6, 3.794 kg ha-1, na região 7, e 4.039 kg ha-1, na região 8, superando a média das cultivares testemunhas em 5%, 13% e 8%, respectivamente.The cultivar BRS 220, recommended for all wheat growing regions in the Paraná State, has shown a high yield potential, wide adaptation and resistance to the main diseases, presenting a gluten suitable for baking. The cultivar belongs to medium maturity group and presents medium height, high resistance to lodging, moderate tolerance to toxic aluminium, moderate tolerance to natural dehiscence but it is susceptible to preharvest sprouting (PHS. In the experimentation over five years, BRS 220 presented a grain yield average of 4,853 kg ha-1 in the region 6, 3,794 kg ha-1 in the region 7 and 4,039 kg ha-1 in the region 8, surpassing 5%, 13% and 8% the average of the local cultivars, respectively.

  18. Profiling of Piper betle Linn. cultivars by direct analysis in real time mass spectrometric technique.

    Science.gov (United States)

    Bajpai, Vikas; Sharma, Deepty; Kumar, Brijesh; Madhusudanan, K P

    2010-12-01

    Piper betle Linn. is a traditional plant associated with the Asian and southeast Asian cultures. Its use is also recorded in folk medicines in these regions. Several of its medicinal properties have recently been proven. Phytochemical analysis showed the presence of mainly terpenes and phenols in betel leaves. These constituents vary in the different cultivars of Piper betle. In this paper we have attempted to profile eight locally available betel cultivars using the recently developed mass spectral ionization technique of direct analysis in real time (DART). Principal component analysis has also been employed to analyze the DART MS data of these betel cultivars. The results show that the cultivars of Piper betle could be differentiated using DART MS data. Copyright © 2010 John Wiley & Sons, Ltd.

  19. Yield in cultivars of the West Indian gherkin for different doses of biofertiliser = Produtividade de cultivares de maxixeiro em função de doses de biofertilizante

    Directory of Open Access Journals (Sweden)

    Lucas Pereira Gomes

    2015-10-01

    Full Text Available The fruit of the West Indian gherkin is greatly appreciated in Brazilian cuisine, especially in the north and northeast of Brazil. However, it is still considered a secondary crop, and is cultivated using non-technical management. As it is a crop produced mainly by small farmers, any research should be directed towards its cultivation using inputs produced on the farm itself, such as bio-fertilisers. The aim of this study was to evaluate the effect on the yield of two West Indian gherkin cultivars, of different doses of bio-fertiliser consisting of cattle manure and commercial products containing bacteria and enzymes that degrade organic molecules. A completely randomised design was used in a 2 x 4 factorial scheme with four replications. The factors included two cultivars (Do Norte and Liso Gibão and four doses of bio-fertiliser (0, 8, 16 and 24 m3 ha-1 applied through fertigation. The experiment lasted for 100 days, with six collections being made, for which the following variables were evaluated: number of fruits, fruit weight, production and yield. All the variables were affected by the interaction between the factors under study. The cultivars did not differ as to yield, however the De North cultivar gave the highest number of fruits, while the Liso Gibão cultivar produced fruit of a greater weight. From the results obtained, a dose of 14 m3 ha-1 is recommended for the Liso Gibão cultivar. For the De Norte cultivar, further studies with higher doses of bio-fertiliser are recommended. = Os frutos de maxixeiro são de grande apreciação na culinária brasileira, principalmente nas regiões Norte e Nordeste do Brasil. No entanto, é considerada uma cultura secundária e seu cultivo é realizado sem adoção de manejo tecnificado. Devido o seu cultivo ser realizado, principalmente, por pequenos produtores, as pesquisas empregando insumos produzidos na própria propriedade, como o biofertilizante, na adubação do maxixe são relevantes

  20. Penis size interacts with body shape and height to influence male attractiveness.

    Science.gov (United States)

    Mautz, Brian S; Wong, Bob B M; Peters, Richard A; Jennions, Michael D

    2013-04-23

    Compelling evidence from many animal taxa indicates that male genitalia are often under postcopulatory sexual selection for characteristics that increase a male's relative fertilization success. There could, however, also be direct precopulatory female mate choice based on male genital traits. Before clothing, the nonretractable human penis would have been conspicuous to potential mates. This observation has generated suggestions that human penis size partly evolved because of female choice. Here we show, based upon female assessment of digitally projected life-size, computer-generated images, that penis size interacts with body shape and height to determine male sexual attractiveness. Positive linear selection was detected for penis size, but the marginal increase in attractiveness eventually declined with greater penis size (i.e., quadratic selection). Penis size had a stronger effect on attractiveness in taller men than in shorter men. There was a similar increase in the positive effect of penis size on attractiveness with a more masculine body shape (i.e., greater shoulder-to-hip ratio). Surprisingly, larger penis size and greater height had almost equivalent positive effects on male attractiveness. Our results support the hypothesis that female mate choice could have driven the evolution of larger penises in humans. More broadly, our results show that precopulatory sexual selection can play a role in the evolution of genital traits.

  1. How to optimize ultrashort pulse laser interaction with glass surfaces in cutting regimes?

    Czech Academy of Sciences Publication Activity Database

    Bulgakova, Nadezhda M.; Zhukov, V.P.; Collins, A.R.; Rostohar, Danijela; Derrien, Thibault; Mocek, Tomáš

    2015-01-01

    Roč. 336, May (2015), s. 364-374 ISSN 0169-4332 R&D Projects: GA MŠk ED2.1.00/01.0027; GA MŠk EE2.3.20.0143 Grant - others:HILASE(XE) CZ.1.05/2.1.00/01.0027; OP VK 6(XE) CZ.1.07/2.3.00/20.0143 Institutional support: RVO:68378271 Keywords : laser material processing * high power lasers * glass cutting * laser-matter interaction * biwave length irradiation * ambient gas ionization Subject RIV: BH - Optics, Masers, Lasers Impact factor: 3.150, year: 2015

  2. Economic technology of laser cutting

    Science.gov (United States)

    Fedin, Alexander V.; Shilov, Igor V.; Vassiliev, Vladimir V.; Malov, Dmitri V.; Peskov, Vladimir N.

    2000-02-01

    The laser cutting of color metals and alloys by a thickness more than 2 mm has significant difficulties due to high reflective ability and large thermal conduction. We made it possible to raise energy efficiency and quality of laser cutting by using a laser processing system (LPS) consisting both of the YAG:Nd laser with passive Q-switching on base of LiF:F2- crystals and the CO2 laser. A distinctive feature of the LPS is that the radiation of different lasers incorporated in a coaxial beam has simultaneously high level of peak power (more than 400 kW in a TEM00 mode) and significant level of average power (up to 800 W in a TEM01 mode of the CO2 laser). The application of combined radiation for cutting of an aluminum alloy of D16 type made it possible to decrease the cutting energy threshold in 1.7 times, to increase depth of treatment from 2 up to 4 mm, and velocity from 0.015 up to 0.7 m/min, and also to eliminate application of absorptive coatings. At cutting of steels the velocity of treatment was doubled, and also an oxygen flow was eliminated from the technological process and replaced by the air. The obtained raise of energy efficiency and quality of cutting is explained by an essential size reducing of a formed penetration channel and by the shifting of a thermal cutting mode from melting to evaporation. The evaluation of interaction efficiency of a combined radiation was produced on the basis of non-stationary thermal-hydrodynamic model of a heating source moving as in the cutting direction, and also into the depth of material.

  3. Cultivar identification by means of isoenzymes 2. Genetic variation at 4 enzyme loci in diploid ryegrass lolium-spp

    DEFF Research Database (Denmark)

    Nielsen, G.; Østergaard, H.; Johansen, Henrik

    1985-01-01

    gel electrophoresis. Cultivars were pairwise compared by means of allelic frequencies assuming Hardy-Weinberg proportions. At first, the comparisons were carried out for each locus separately. The 2 loci Pgi-2 and Got-3 distinguished perennial ryegrass cultivars fairly well, but the discrimination...

  4. Optimisation Of Cutting Parameters Of Composite Material Laser Cutting Process By Taguchi Method

    Science.gov (United States)

    Lokesh, S.; Niresh, J.; Neelakrishnan, S.; Rahul, S. P. Deepak

    2018-03-01

    The aim of this work is to develop a laser cutting process model that can predict the relationship between the process input parameters and resultant surface roughness, kerf width characteristics. The research conduct is based on the Design of Experiment (DOE) analysis. Response Surface Methodology (RSM) is used in this work. It is one of the most practical and most effective techniques to develop a process model. Even though RSM has been used for the optimization of the laser process, this research investigates laser cutting of materials like Composite wood (veneer)to be best circumstances of laser cutting using RSM process. The input parameters evaluated are focal length, power supply and cutting speed, the output responses being kerf width, surface roughness, temperature. To efficiently optimize and customize the kerf width and surface roughness characteristics, a machine laser cutting process model using Taguchi L9 orthogonal methodology was proposed.

  5. iTRAQ-based proteomics of sunflower cultivars differing in resistance to parasitic weed Orobanche cumana.

    Science.gov (United States)

    Yang, Chong; Xu, Ling; Zhang, Na; Islam, Faisal; Song, Wenjian; Hu, Luyang; Liu, Dan; Xie, Xiaonan; Zhou, Weijun

    2017-07-01

    Orobanche cumana is an obligate root parasite causing severe damage to many economically important crops, including sunflowers worldwide. For efficient control measures, it is necessary to understand the resistant mechanism during interaction at molecular level. The present study emphasizes on comparative proteomics to investigate the mechanistic basis of compatible and incompatible interaction of O. cumana with resistant (JY207) and susceptible (TK0409) sunflowers. More than 3500 proteins were identified from two cultivars by iTRAQ analysis. Identified proteins associated with general functions, posttranslational modification, energy production and conversion, carbohydrate transport and metabolism, and signal transduction mechanisms were the most represented category of induced proteins in both cultivars. The resistant interaction was characterized by alteration of defense-related proteins involved in recognition of parasites, accumulation of pathogenesis-related proteins, biosynthesis of lignin, and detoxification of toxic metabolites in JY207 after inoculation. The susceptible interaction was characterized by decreased abundance of proteins involved in biosynthesis and signaling of plant growth regulators including auxin, gibberellin, brassinosteroid, and ethylene in TK0409 after inoculation. The present study provides comprehensive details of proteins and differential modulation of pathways regulated under compatible and incompatible interaction, allowing the identification of important molecular components for development of sustainable resistance against this parasite. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Genetic variability among 18 cultivars of cooking bananas and plantains by RAPD and ISSR markers

    Directory of Open Access Journals (Sweden)

    YUYU SURYASARI POERBA

    2010-07-01

    Full Text Available Poerba YS, Ahmad F (2010 Genetic variability among 18 cultivars of cooking bananas and plantains by RAPD and ISSR markers. Biodiversitas 11: 118-123. This study was done to assess the molecular diversity of 36 accessions (18 cultivars of the plantain and cooking bananas (Musa acuminata x M. balbisiana, AAB, ABB subgroups based on Random amplified polymorphic DNA (RAPD and and Inter Simple Sequence Repeats (ISSR markers and to determine genetic relationships in the bananas. RAPD and ISSR fingerprinting of these banana varieties was carried out by five primers of RAPDs and two primers of ISSRs. RAPD primers produced 63 amplified fragments varying from 250 to 2500 bp in size. 96.82% of the amplification bands were polymorphic. ISSR primers produced 26 amplified fragments varying from 350 bp to 2000 bp in size. The results showed that 92.86% of the amplification bands were polymorphic. The range of genetic distance of 18 cultivars was from 0.06-0.67.

  7. Genetic diversity and structure in a collection of tulip cultivars assessed by SNP markers

    NARCIS (Netherlands)

    Tang, N.; Shahin, A.; Bijman, P.J.J.; Liu, J.; Tuyl, van J.M.; Arens, P.

    2013-01-01

    Although tulip is one of the most important bulbous crops worldwide, the genetic background of most cultivars is unclear at present. The purposes of this study are to investigate genetic diversity and to identify the genetic structure and relationships among tulip cultivars. A total of 236

  8. Identification of soybean cultivars for the southwestern region of the Cerrado in Piauí=Indentificação de cultivares de soja para a região sudoeste do Cerrado piauiense

    Directory of Open Access Journals (Sweden)

    Nerison Pedro Bohn

    2016-06-01

    Full Text Available The soybean in the southwestern region of the Cerrado in Piaui occupies a prominent position in agricultural production. However, levels of productivity are still below the national average, a fact due, among other factors, to the inappropriate choice of cultivar. The aim of this study was to select the most productive soybean cultivars to be used in the region of the Cerrado in Piauí. The work was carried out in the 2010/2011 agricultural year. The experimental design was of randomised blocks with four replications. The treatments comprised 15 cultivars: Soy Tech 820; AS 8197; P98 Y70; P99R03; Nidera 8843; Nidera 8279; Monsoy 8867 RR; Monsoy 9056 RR; Monsoy 8766 RR; Monsoy 8849 RR; Monsoy 8527 RR; Monsoy 9144 RR; MABR 33135; MABR 2936 RR and MABR 1029 CV. The following variables were evaluated: plant height, first pod insertion, number of branches, number of pods with 1, 2 and 3 beans, total number of pods on each plant and bean yield. Of the 15 cultivars tested, 10 had a productivity greater than 3,500 kg ha-1, and only Monsoy 8527 RR had a productivity of less than 3,000 kg ha-1. The greatest contributions to an increase in productivity were seen in the P98 Y70 and Nidera 8843 cultivars, with 51% and 62% respectively.= A soja no Cerrado do sudoeste piauiense ocupa posição de destaque na produção agrícola. No entanto, os níveis de produtividades ainda estão abaixo da média nacional, fato associado, entre outros fatores, à escolha inadequada da cultivar. Objetivou-se selecionar as cultivares de soja mais produtivas a serem utilizadas na região do Cerrado piauiense. O trabalho foi conduzido no ano agrícola 2010/2011. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições, tendo como tratamentos 15 cultivares: Soy Tech 820; AS 8197; P98 Y70; P99R03; Nidera 8843; Nidera 8279; Monsoy 8867 RR; Monsoy 9056 RR; Monsoy 8766 RR; Monsoy 8849 RR; Monsoy 8527 RR; Monsoy 9144 RR; MABR 33135; MABR 2936 RR e

  9. Crystal Orientation Effect on the Subsurface Deformation of Monocrystalline Germanium in Nanometric Cutting.

    Science.gov (United States)

    Lai, Min; Zhang, Xiaodong; Fang, Fengzhou

    2017-12-01

    Molecular dynamics simulations of nanometric cutting on monocrystalline germanium are conducted to investigate the subsurface deformation during and after nanometric cutting. The continuous random network model of amorphous germanium is established by molecular dynamics simulation, and its characteristic parameters are extracted to compare with those of the machined deformed layer. The coordination number distribution and radial distribution function (RDF) show that the machined surface presents the similar amorphous state. The anisotropic subsurface deformation is studied by nanometric cutting on the (010), (101), and (111) crystal planes of germanium, respectively. The deformed structures are prone to extend along the 110 slip system, which leads to the difference in the shape and thickness of the deformed layer on various directions and crystal planes. On machined surface, the greater thickness of subsurface deformed layer induces the greater surface recovery height. In order to get the critical thickness limit of deformed layer on machined surface of germanium, the optimized cutting direction on each crystal plane is suggested according to the relevance of the nanometric cutting to the nanoindentation.

  10. Caracterización morfo agronómica de diecinueve cultivares de quinua (Chenopodium quinoa Willd. en la sabana de Bogotá Morpho-agronornic characterization of nineteen cultivars of quinoa (Chenopodium quinoa Willd. under Bogota's savanna conditions

    Directory of Open Access Journals (Sweden)

    Torres M. Juner

    2000-12-01

    Full Text Available Con el propósito de proveer información acerca de la variabilidad genética y la adaptación en la Sabana de Bogotá de la colección de quinua correspondiente a la Prueba Americana y Europea de Quinua, se estudiaron 19 cultivares mediante la evaluación 49 características morfológicas y agronómicas. El ensayo se realizó en el Centro Agropecuario «Marengo» de la Universidad Nacional de Colombia, ubicado en Mosquera (Cundinamarca. El análisis estadístico, mediante componentes principales para 35 de las variables evaluadas mostró que los ocho primeros componentes
    explican el 88.12% de la variación total. Estos componentes
    estuvieron asociados a 18 variables manifestando la diversidad entre los genotipos. Además, éstos se usaron para construir un dendograma que, calculado a partir de la distancia euclidiana, mostró la existencia de nueve grupos en los cuales se distinguieron claramente los materiales americanos de los europeos. Agronómicamente se destacaron los cultivares E-DK-4 y G-205- 95, procedentes de Dinamarca, principalmente por su precocidad, alto rendimiento en grano, alto rendimiento en biomasa y
    por su porte bajo.
    Nineteen cultivars of «American and European Quinoa Test» were used in this assay. Forty-nine morphological and agronomic characteristics were evaluated at Research Center «Marengo» of National University of Colombia, located at Mosquera (Cundinamarca. The main objective ofthis experiment was to study the genetic variability of quinoa cultivars from American and European countries. The statistical analysis was carried out with 35 out of 49 variables. The first eight components explained the 88,12% of total variation and were constituted by 18 variables. Using this information a dendogram was constructed. Nine groups
    were identified. Cultivars from American countries were separated from European's ones. The bcst cultivars were E-DK-4 and G-205-95 from Denmark. These presented high

  11. Establishing trees on cut-over peatlands in eastern Canada

    Directory of Open Access Journals (Sweden)

    J. Bussières

    2008-12-01

    Full Text Available Four major tree-planting trials on cut-over peatlands in eastern Canada were surveyed in 2002, in order to evaluate the potential use of trees in rehabilitation following horticultural peat extraction. At one of the sites, an experiment to determine the appropriate fertilisation rate for trees planted on cut-over peatlands was also conducted over several years. Tree performance was assessed by measuring survival, total height and annual growth of red maple (Acer rubrum L., tamarack (Larix laricina (Du Roi Koch., black spruce (Picea mariana (Mill. B.S.P., jack pine (Pinus banksiana Lamb. and hybrid poplar (Populus spp.. Establishment and growth of tamarack and black spruce in cut-over peatlands showed good potential when compared to performance in conventional forestry plantations. Red maple and jack pine gave poor productivity but promising survival, whilst hybrid poplar plantings failed. Adding nutrients was essential for growth but dosages above 122.5 g of 3.4N-8.3P-24.2K per tree gave no further improvement. Therefore, several different tree species can be planted to reclaim cut-over peatlands in eastern Canada, so long as the appropriate species are chosen and nutrients are provided.

  12. Evaluation of Garlic Cultivars for Polyphenolic Content and Antioxidant Properties

    Science.gov (United States)

    Cheng, Siqiong; Li, Panpan; Du, Junna; Chang, Yanxia; Meng, Huanwen

    2013-01-01

    Two phenolic compound parameters (total phenolic and flavonoid contents) and 5 antioxidant parameters (DPPH [2, 2-diphenyl-1-picrylhydrazyl] radical scavenging activity, HRSC (hydroxyl radical scavenging capacity), FRAP (ferric ion reducing antioxidant power), CUPRAC (cupric ion reducing antioxidant capacity), and MCA (metal chelating activity) were measured in bulbs and bolts of 43 garlic cultivars. The bulbs of cultivar ‘74-x’ had the highest phenolic content (total phenolic, flavonoids) and the strongest antioxidant capacity (DPPH, FRAP, and CUPRAC), followed by bulbs of cultivar ‘Hanzhong purple’; the bulbs of cultivar ‘Gailiang’ had the lowest phenolic content and antioxidant capacity (FRAP, CUPRAC, MCA). The bolts of ‘Hanzhong purple’ also had higher phenolic content. Principal components analysis (PCA) separated the cultivars into 3 groups according to phenolic and flavonoid contents and strength of antioxidant activity. The first group had higher HRSC, FRAP, and flavonoid content; the second group had higher total phenolic content and MCA; some cultivars in the third group had higher HRSC and FRAP. All 8 test garlic bulb extracts successfully prevented Human Vascular Endothelial Cell death and significantly prevented reactive-oxygen species (ROS) formation in oxidative stress model, in which cultivar ‘74-x’ had highest protection capability, following by cultivar ‘Hanzhong purple’, and the bulbs of cultivar ‘No. 105 from Korea’ had the lower protection capability against cell death and ROS formation. The protection capability in vivo of these garlic cultivars was consistent with their phenolic content and antioxidant capacity. PMID:24232741

  13. CULTIVAR RELEASE-BRS 217 Flora: Early-maturing soybean cultivar

    Directory of Open Access Journals (Sweden)

    Plínio Itamar de Mello de Souza

    2008-01-01

    Full Text Available The soybean (Glycine max L. Merr. cultivar BRS 217 Flora was developed by Embrapa and released forproduction in the states of Goiás, Minas Gerais, Bahia, Mato Grosso and the Distrito Federal, Brazil. It is resistant to stemcanker, frog-eye leaf spot, bacterial pustule, and partially resistant to powdery mildew.

  14. Fenologia, produção e teor de antocianinas de cultivares de morangueiro em ambiente protegido Phenology, production and content of strawberry crops cultivars anthocyanins produced under protected environment

    Directory of Open Access Journals (Sweden)

    Eunice Oliveira Calvete

    2008-06-01

    experiment was conduced in an inside structure of 280 m²covered with PEBD film, with 150 µm and anti UV additive. The designs were arranged in split plots with 3 repetitions, the treatments in subdivided portions, and the period for planting seedlings (April 28th and May 13th the main plots, and the cultivars (Dover, Tudla, Comander, Oso Grande, Campinas, Chandler, Serrano e Camarosa, the sub-plots. Phenological characteristics and yield components were evaluated. The content of anthocyanins was determinated by using a specterphotometer with wave length of 528 nm. There was no interaction between cultivars and planting periods about the evaluated characteristics. The higher productivity was the earlier planting strawberry crop in April. The cultivars Camarosa, Dover, Oso Grande and Tudla are the most recommended for their greater productivities and range of production periods, and "Serrano" cultivar for higher antocianin levels.

  15. Plasma arc cutting: speed and cut quality

    International Nuclear Information System (INIS)

    Nemchinsky, V A; Severance, W S

    2009-01-01

    When cutting metal with plasma arc cutting, the walls of the cut are narrower at the bottom than at the top. This lack of squareness increases as the cutting speed increases. A model of this phenomenon, affecting cut quality, is suggested. A thin liquid layer, which separates the plasma from the solid metal to be melted, plays a key role in the suggested model. This layer decreases heat transfer from the plasma to the solid metal; the decrease is more pronounced the higher the speed and the thicker the liquid metal layer. Since the layer is thicker at the bottom of the cut, the heat transfer effectiveness is lower at the bottom. The decrease in heat transfer effectiveness is compensated by the narrowness of the cut. The suggested model allows one to calculate the profile of the cut. The result of the calculations of the cutting speeds for plates of various thicknesses, at which the squareness of the cut is acceptable, agrees well with the speeds recommended by manufacturers. The second effect considered in the paper is the deflection of the plasma jet from the vertical at a high cutting speed. A qualitative explanation of this phenomenon is given. We believe the considerations of this paper are pertinent to other types of cutting with moving heat sources.

  16. Submerged cutting of steel by abrasive water jets

    International Nuclear Information System (INIS)

    Haferkamp, H.; Louis, H.; Meier, G.

    1990-01-01

    A special cutting head for underwater use was designed and built. Tests were carried out to find out useful parameters for submerged cutting. With regard to the production of secondary waste the abrasive flow rate had to be minimized. This was achieved by using a small water jet nozzle (up to 0.4 mm diameter) and a high pressure (up to 4000 bar) with an optimal abrasive flow rate of about 5 g/s. In the case of a higher ambient pressure a decrease of the cutting performance was measured. But this decrease is not important regarding decommissioning because the ambient pressure is less than 2 bar. An air mantle nozzle was adapted to the cutting head to improve the working distance under water. The air mantle surrounding the abrasive jet lowers the friction between jet and surrounding water and increases the cutting efficiency in the case of greater working distances. (author)

  17. Cutting technique for reactor internals by laser beam

    International Nuclear Information System (INIS)

    Matsumoto, O.; Sugihara, M.; Matsuda, K.; Miya, K.

    1990-01-01

    At present in Japan the verification tests on the commercial nuclear power reactor decommissioning technology are being conducted as the project of The Ministry of International Trade and Industry by Nuclear Power Engineering Test Center. This paper summarizes the interim results of the verification test for the reactor core internals decommissioning technology, which is being conducted from 1986 as a theme of the above project. All core internals to be studied here are made of stainless steel, and the maximum wall thickness is about 500mm (the maximum one to be cut is about 300mm) for the PWR's, and about 100mm for the BWR's. Though the plasma cutting, arc saw cutting method, etc. have been studied u p to now as the cutting technology for decommissioning these core internals, the authors are carrying out the development and verification test of the cutting technology with the laser beam, which is expected to increase its power in future and can be applied to various materials

  18. Seed storage effects on germination for two forage kochia cultivars

    Science.gov (United States)

    The cultivar ‘Snowstorm’ forage kochia was released by the USDA-ARS in 2012. It is a synthetic cultivar selected for stature, forage production, and adaptation to semiarid environments. Similar to the earlier released (1984) ‘Immigrant’ cultivar it can increase rangeland productivity magnitudes when...

  19. New wheat cultivars induced by fast neutrons in Iraq

    International Nuclear Information System (INIS)

    Ibrahim, I.F.; Al-Maaroof, E.M.; Al-Aubaidi, M.O.; Al-Janabi, K.K.; Al-Janabi, A.A.; Al-Rawi, L.; Ali, A.H.

    1994-01-01

    Wheat (Triticum aestivum L. ssp. aestivum) seeds from the cultivar Mexipak and F2 of the cross SaberBeg/Mexipak and saberBeg/Mexipak/Abu-Ghraib-4 were irradiated with fast neutrons and screened for resistance to leaf rust (Puccinia recondita Rob. ex Desm.) during three generations. Thirty-eight and 226 variants showing resistant and moderately resistant reactions, respectively, were selected. Of these variants three mutants showing genetic purity and stability were studied for yield components for four successive generations. Analyses of proteins and isozymes along with chemical and physical properties were conducted on these mutants and their parents. Data on disease incidence, lodging, shattering and yield components indicated that all the mutants significantly surpassed the cultivars Mexipak, SaberBeg and Abu-Ghraib-4. Both mutants Tamuz-1 and Tamuz-2 surpassed Mexipak in bread-making quality, while the mutant Tamuz-3 had a higher tendency for better bread-making quality than Mexipak or SeberBeg

  20. Absence of modulatory action on haptic height perception with musical pitch

    Directory of Open Access Journals (Sweden)

    Michele eGeronazzo

    2015-09-01

    Full Text Available Although acoustic frequency is not a spatial property of physical objects, in common language, pitch, i.e., the psychological correlated of frequency, is often labeled spatially (i.e., high in pitch or low in pitch. Pitch-height is known to modulate (and interact with the response of participants when they are asked to judge spatial properties of non-auditory stimuli (e.g., visual in a variety of behavioral tasks. In the current study we investigated whether the modulatory action of pitch-height extended to the haptic estimation of height of a virtual step.We implemented a HW/SW setup which is able to render virtual 3D objects (stair-steps haptically through a PHANTOM device, and to provide real-time continuous auditory feedback depending on the user interaction with the object. The haptic exploration was associated with a sinusoidal tone whose pitch varied as a function of the interaction point’s height within (i a narrower and (ii a wider pitch range, or (iii a random pitch variation acting as a control audio condition. Explorations were also performed with no sound (haptic only. Participants were instructed to explore the virtual step freely, and to communicate height estimation by opening their thumb and index finger to mimic the step riser height, or verbally by reporting the height in centimeters of the step riser. We analyzed the role of musical expertise by dividing participants into non musicians and musicians. Results showed no effects of musical pitch on high-realistic haptic feedback. Overall there is no difference between the two groups in the proposed multimodal conditions. Additionally, we observed a different haptic response distribution between musicians and non musicians when estimations of the auditory conditions are matched with estimations in the no sound condition.

  1. Genetic and physiological characterization of two clusters of quantitative trait Loci associated with seed dormancy and plant height in rice.

    Science.gov (United States)

    Ye, Heng; Beighley, Donn H; Feng, Jiuhuan; Gu, Xing-You

    2013-02-01

    Seed dormancy and plant height have been well-studied in plant genetics, but their relatedness and shared regulatory mechanisms in natural variants remain unclear. The introgression of chromosomal segments from weedy into cultivated rice (Oryza sativa) prompted the detection of two clusters (qSD1-2/qPH1 and qSD7-2/qPH7) of quantitative trait loci both associated with seed dormancy and plant height. Together, these two clusters accounted for >96% of the variances for plant height and ~71% of the variances for germination rate in an isogenic background across two environments. On the initial introgression segments, qSD1-2/qPH1 was dissected genetically from OsVp1 for vivipary and qSD7-2/qPH7 separated from Sdr4 for seed dormancy. The narrowed qSD1-2/qPH1 region encompasses the semidwarf1 (sd1) locus for gibberellin (GA) biosynthesis. The qSD1-2/qPH1 allele from the cultivar reduced germination and stem elongation and the mutant effects were recovered by exogenous GA, suggesting that sd1 is a candidate gene of the cluster. In contrast, the effect-reducing allele at qSD7-2/qPH7 was derived from the weedy line; this allele was GA-insensitive and blocked GA responses of qSD1-2/qPH1, including the transcription of a GA-inducible α-amylase gene in imbibed endosperm, suggesting that qSD7-2/qPH7 may work downstream from qSD1-2/qPH1 in GA signaling. Thus, this research established the seed dormancy-plant height association that is likely mediated by GA biosynthesis and signaling pathways in natural populations. The detected association contributed to weed mimicry for the plant stature in the agro-ecosystem dominated by semidwarf cultivars and revealed the potential benefit of semidwarf genes in resistance to preharvest sprouting.

  2. SOME ASPECTS IN HEIGHT MEASUREMENT BY UAV PHOTOGRAMMETRY

    Directory of Open Access Journals (Sweden)

    R. Matsuoka

    2013-08-01

    Full Text Available We conducted an experiment to investigate the feasibility of the deformation measurement of a large-scale solar power plant on reclaimed land by UAV photogrammetry. Two teams engaged in the experiment at first. One, which is called Team-A, carried out orientation of images following the procedure of conventional aerial photogrammetry. The other, which is called Team-C, executed that in the manner of close range photogrammetry. The RMSE in height measurement by Team-A was 121.5 mm, while that by Team-C was 8.7 mm. This paper reports an analysis conducted in order to investigate the cause of the large difference in height measurement accuracy between Team-A and Team-C. In the analysis the third team, which is called Team-S, conducts supplementary orientation by using the images utilized by Team-A in the same manner as Team-C did. The RMSE in height measurement by Team-S is 19.1 mm. Our investigation focuses on the difference of the arrangement of points utilized in the orientation. Team-A selected pass points and tie points on image automatically by Intergraph’s ImageStation Automatic Triangulation (ISAT software, while Team-C and Team-S selected points to be utilized in orientation manually so that selected points are distributed uniformly in the experiment area. From the results of the analysis we conclude that the sets of tie points along a straight line on a plane that were selected automatically by the ISAT would bring the low accuracy in height measurement by Team-A.

  3. Fruit Set of Several Sour Cherry Cultivars in Latvia Influenced by Weather Conditions Before and During Flowering

    Directory of Open Access Journals (Sweden)

    Feldmane Daina

    2017-06-01

    Full Text Available Fruit set is a crucial stage in the process of yield formation, which is influenced by environmental factors, growing technologies and peculiarities of genotype. The aim of the study was to evaluate the quality of pollen (viability and germination capacity and the effect of weather before and during flowering on fruit set in sour cherry cultivars ‘Latvijas Zemais’, ‘Zentenes’, ‘Bulatnikovskaya’, and ‘Orlica’. The research was carried out in Institute of Horticulture (Latvia University of Agriculture in 2009-2016. Good pollen viability and germination was found for cultivars ‘Latvijas Zemais’ and ‘Bulatnikovskaya’. Negative effects of increasing air temperature (in the range of 7.7 to 17.5 °C and relative humidity (in the range of 51.4 to 88.5% was observed for all cultivars during flowering. The effects of diurnal temperature fluctuations, wind and the amount of days with precipitation differed depending on sour cherry cultivar.

  4. Effect of Different Levels of Sodium Chloride on Germination Characteristics of 20 Cultivars of Bread and Durum Wheat20 Cultivars of Bread and Durum Wheat

    Directory of Open Access Journals (Sweden)

    E Bijanzadeh

    2011-01-01

    Full Text Available Abstract Salt stress is a major stress influencing wheat seedling establishment. A laboratory experiment was conducted to evaluate the response of 20 cultivars of wheat to two levels of salinity (8 and 16 dS/m NaCl, at the College of Agriculture, Shiraz University, Shiraz, Iran in 2008. Maximum root length was obtained in Dabira (5.73 mm at 16dS/m salinity level. In control, durum wheat cultivars including D81-17, Yavaros, D82-16, D79-15 and Taro3 had the maximum root length compared to bread wheat, however, with increasing salinity level to 16dS/m, minimum root length was observed in D82-16 (0.3 mm. In all cultivars, with increasing salinity level, shoot length was decreased and minimum shoot length was observed in D82-16 and D79-15. Under control conditions, Taro 3 cultivar had maximum seedling dry weight (108.6 mm, however, at 8 and 16 dS/m salinity levels, seedling dry weight of this cultivar was decreased to 92.33 and 78.43 mg, respectively. All seeds (100% were germinated in D82-16, Taro3, Bolani Cross, and Chamran cultivars under 16 dS/m but in Marvdasht cultivar, seed germination percentage under 8 and 16 dS/m reached to 65 and 50%, respectively. Shiraz (10.8 seeds/day, Adl Cross(10 seeds/day, and Bolani Cross (9.1 seeds/day had maximum germination rate under 16 dS/m salinity level. Differences among wheat cultivars also found in germination stress index (germination rate under stress divided by germination rate under control and Shiraz, Adl Cross and Bolani Cross had maximum germination stress index, while Yavaros and D82-16 had minimum germination stress index. Furthermore, with increasing salinity level, different responses were observed among wheat cultivars in root and shoot length, germination rate and germination stress index which demonstrated the genetic diversity among wheat cultivars. It appeared that durum wheat cultivars, compared to bread wheat cultivars, had lower germination stress index and germination rate. Among what

  5. Development of cutting techniques of steel pipe by wire sawing

    International Nuclear Information System (INIS)

    Kamiyama, Yoshinori; Inai, Shinsuke

    2004-01-01

    A cutting method has a high cutting efficiency and enable cutting in safe. A wire saw cutting method is used for dismantling of massive concrete structures such as nuclear power plants with an effective and safe mean. In the case of dismantling of structures with multiple pipes installed at these facilities, an effective method is also demanded. If a wire saw method to remotely cut target objects in a large block in bulk is applicable, it will be expected an effective dismantling work under severe conditions with radioactivity. Although the wire saw method has adaptability for any shapes of cutting target objects and is widely adopted in dismantling of concrete constructs, it has few actual achievements in dismantling of steel structures such as steel pipe bundle. This study aims to verify its cutting characteristics and adaptability as a cutting method by conducting a cutting basic test to develop a diamond wire saw method to efficiently cut constructs with multiple pipes in a bundle. The test proved that a wire saw cutting method apply to dismantle structures with steel pipe bundle. A wire saw for metal cutting is adaptable in dismantling of bundle of thick carbon steel and stainless steel pipes. And also a wire saw for concrete cutting is adaptable in dismantling of pipe bundle structure with a mortar. (author)

  6. True retention of nutrients on cooking of Australian retail lamb cuts of differing carcass classification characteristics.

    Science.gov (United States)

    Kosulwat, Somkiat; Greenfield, Heather; Buckle, Kenneth A

    2003-12-01

    The true retention of nutrients (proximate principles and cholesterol) on cooking of three retail cuts from lambs classified by weight, sex and fatness score was investigated. Fat retentions of the total cut and of the lean portion of lamb legs and mid-loin chops were not affected by carcass fatness, weight and sex or their interactions, however, the fat retention of the total cut and of the lean portion of forequarter chops was affected by fat score, with forequarter chops from fat score 1 retaining more fat than did chops of carcasses of higher fat score. Overall, fat was lost by all cuts (total cut) on cooking, with only 70-80% of fat being retained, but fat content of lean only increased on cooking (retention >100%), indicating the passage of fat into the lean portion from the external fat cover during the cooking process. Carcass factors and their interactions had little or no effect on the protein, water and ash retentions of the total cut or the lean portions of the three cuts. Cholesterol retention by the lean portion of three cooked lamb cuts was not affected by any carcass factors or their interactions. Cholesterol retentions were ∼99% for total cuts and tended to be ∼102% for the lean portions.

  7. Grain yield and competitive ability against weeds in modern and heritage common wheat cultivars are differently influenced by sowing density

    Directory of Open Access Journals (Sweden)

    Mariateresa Lazzaro

    2017-12-01

    Full Text Available Sowing density can have a strong impact on crop stand development during wheat growing cycle. In organic and low-input agriculture, and therefore with minimum or nil use of chemical herbicides, increased sowing density is expected to affect not only grain yield but also weed suppression. In this study we tested, under Mediterranean conditions, six common wheat cultivars (three modern and three heritage and two three-component mixtures (arranged by combining the three modern or the three heritage cultivars. The different crop stands were tested at sowing densities of 250 (low and 400 (high, similar to standard sowing density used by local farmers viable seeds m–2 for two growing seasons. We did not detect a significant effect of crop stand diversity (single cultivars vs mixtures on grain yield and weed suppression. Differences were ascribed to type of cultivars used (heritage vs modern. Compared to high sowing density, in modern cultivars grain yield did not decrease significantly with low sowing density, whereas in heritage cultivars it increased by 15.6%, possibly also because of 21.5% lower plant lodging. Weed biomass increased with low sowing density both in heritage and modern cultivar crop stand types. However, heritage crop stands had, on average, a lower weed biomass (56% than modern crop stands. Moreover, weed biomass in heritage crop stands at low density (6.82±1.50 g m–2 was lower than that of modern cultivars at the same sowing density (15.54±3.35 g m–2, confirming the higher suppressive potential of the former. We can conclude that lower sowing density can be advisable when using heritage crop stands as it keeps productivity while decreasing plant lodging and maintaining weeds under control.

  8. Experimental study on concrete cutting by CO2 laser beam

    International Nuclear Information System (INIS)

    Kutsumizu, Akira; Tomura, Hidemasa; Wakizaka, Tatsuya; Hishikawa, Kyoichi; Moriya, Masahiro

    1994-01-01

    Methods for dismantling nuclear reactor facilities must meet particularly exacting requirements imposed by heavily reinforced and radioactivated reactor shield walls. Conventional methods do not meet all such requirements, however. Intrigued by excellent characteristics of the laser cutting method relative to nuclear facility demolition, we carried out an experimental study to make a comprehensive evaluation of its characteristics, especially for deep cutting, with success in identifying main factors affecting the cutting depth of a laser and characterizing its cutting behavior. The study results indicate that a 50 kW class CO 2 laser has a potential to provide a practicable cutting speed and depth. (author)

  9. The Effect of Muscle Fiber Direction on the Cut Surface Angle of Frozen Fish Muscular Tissue Cut by Bending Force

    OpenAIRE

    岡本, 清; 羽倉, 義雄; 鈴木, 寛一; 久保田, 清

    1996-01-01

    We have proposed a new cutting method named "Cryo-cutting" for frozen foodstuffs by applying a bending force instead of conventional cutting methods with band saw. This paper investigated the effect of muscle fiber angle (θf) to cut surface angle (θs) of frozen tuna muscular tissue at -70, -100 and -130°C for the purpose of evaluating the applicability of the cryo-cutting method to frozen fishes. The results were as follows : (1) There were two typical cutting patterns ("across the muscle fib...

  10. Critical test of isotropic periodic sum techniques with group-based cut-off schemes.

    Science.gov (United States)

    Nozawa, Takuma; Yasuoka, Kenji; Takahashi, Kazuaki Z

    2018-03-08

    Truncation is still chosen for many long-range intermolecular interaction calculations to efficiently compute free-boundary systems, macromolecular systems and net-charge molecular systems, for example. Advanced truncation methods have been developed for long-range intermolecular interactions. Every truncation method can be implemented as one of two basic cut-off schemes, namely either an atom-based or a group-based cut-off scheme. The former computes interactions of "atoms" inside the cut-off radius, whereas the latter computes interactions of "molecules" inside the cut-off radius. In this work, the effect of group-based cut-off is investigated for isotropic periodic sum (IPS) techniques, which are promising cut-off treatments to attain advanced accuracy for many types of molecular system. The effect of group-based cut-off is clearly different from that of atom-based cut-off, and severe artefacts are observed in some cases. However, no severe discrepancy from the Ewald sum is observed with the extended IPS techniques.

  11. UEL 7: nova cultivar de Dendrobium UEL 7: a new Dendrobium cultivar

    Directory of Open Access Journals (Sweden)

    Ricardo Tadeu de Faria

    2011-09-01

    Full Text Available UEL 7 é uma cultivar de Dendrobium nobile desenvolvida no Departamento de Agronomia da Universidade Estadual de Londrina resultante do cruzamento das plantas matrizes D3 x D8 e selecionada pela coloração das flores amarelas e com largura e comprimento semelhantes (7,0 cm, formando praticamente um círculo. As plantas foram polinizadas artificialmente, e as sementes semeadas em meio de cultura in vitro. A cultivar apresenta flores de coloração amarela, labelo com o centro marrom escuro e o pseudobulbo apresenta em mé dia 11 flores. As flores têm durabilidade de aproximadamente 30 dias.UEL 7 is a Dendrobium nobile's cultivar developed at The Department of Agronomy of Universidade Estadual de Londrina and is the result of the crossing between D3 x D8 and selected for its yellow flowers and format with similar width and length (7.0 cm, almost forming a circle. The plants were pollinated artificially, and the seeds sowed in growth media in vitro. The cultivar presents flowers of yellow coloration, labelo with the center dark brown color and the pseudobulb presents 11 flowers on average. The flowers durability is about 30 days.

  12. Nutrient extraction and exportation by common bean cultivars under different fertilization levels: I - macronutrients

    Directory of Open Access Journals (Sweden)

    Rogério Peres Soratto

    2013-08-01

    Full Text Available The use of cultivars with a higher yield potential and the adoption of new technology have achieved high grain yields in common bean, which probably changed the demand for nutrients in this crop. However, there is almost no information about the periods of the cycle in which nutrients are most demanded at which quantities by the main cultivars. The objective of this study was to evaluate the macronutrient extraction and exportation by the common bean cultivars Pérola and IAC Alvorada, under different levels of NPK fertilization, on a dystroferric Red Nitosol, in Botucatu, São Paulo State, Brazil. The experiment was arranged in a randomized complete block (split plot design with four replications. The plots consisted of six treatments based on a 2 x 3 factorial model, represented by two cultivars and three NPK levels (PD0 - 'Pérola' without fertilization, PD1 - 'Pérola' with 50 % of recommended fertilization, PD2 - 'Pérola' with 100 % of recommended fertilization, AD0 - 'IAC Alvorada' without fertilization, AD1 - 'IAC Alvorada' with 50 % of recommended fertilization, and AD2 - 'IAC Alvorada' with 100 % of recommended fertilization and subplots sampled seven times during the cycle. At higher levels of NPK fertilization, the grain yield and macronutrient extraction and exportation of both cultivars were higher, but without statistical differences. Macronutrient absorption was higher in the treatments with 100 % of recommended NPK fertilization (average amounts per hectare: 140 kg N, 16.5 kg P, 120 kg K, 69 kg Ca, 17.9 kg Mg, and 16.3 kg S. Regardless of the treatment, the demand for N, P, K, Ca, and Mg was highest from 45 to 55 days after emergence (DAE, i.e., in the R7 stage (pod formation, while the highest S absorption rates were concentrated between 55 and 65 DAE. More than 70 % of P, between 58 and 69 % of N, 40 and 52 % of S, 40 and 48 % of K, and 35 and 45 % of Mg absorbed during the cycle was exported with grains, whereas less than 15

  13. Solid-stemmed spring wheat cultivars give better androgenic response than hollow-stemmed cultivars in anther culture

    OpenAIRE

    Weigt, Dorota; Kiel, Angelika; Nawraca?a, Jerzy; Pluta, Mateusz; ?acka, Agnieszka

    2016-01-01

    Solid-stemmed spring wheat cultivars (Triticum aestivum L.) are resistant to the stem sawfly (Cephus cinctus Nort.) and lodging. Anthers of 24 spring wheat cultivars with varying content of pith in the stem were used in the experiment. All were classified into three groups: solid, medium?solid and hollow stems. There was considerable influence of the cultivar on callus formation and green plant regeneration. The highest efficiency of green plant regeneration (24%) was observed for the solid-s...

  14. Crecimiento y distribución de materia seca en cultivares de fresa (Fragaria sp. bajo estrés salino

    Directory of Open Access Journals (Sweden)

    Casierra-Posada Fánor

    2005-06-01

    Full Text Available

    height: 115%; mso-bidi-font-family: Baskerville; mso-bidi-font-style: italic;">Las sales se acumulan a menudo en el suelo de los cultivos de fresa como consecuencia del agua empleada para fertirrigación. Se realizó un experimento en invernadero con el objeto de estudiar la respuesta de cultivares de fresa (Fragaria sp. a concentraciones crecientes de NaCl. Los cultivares de fresa Sweet Charlie, Camarosa y Chandler se sembraron en materas con suelo en la localidad de Tunja (Colombia. El suelo de las materas se salinizó gradualmente con NaCl mediante la adición de 0, 20, 40, 60 y 80 mM· kg-1 de suelo secado a temperatura ambiente. Las plantas se cosecharon 16 semanas luego de empezados los tratamientos. Se midió la distribución de materia seca en hojas, coronas, flores, raíces y frutos, así como el área foliar total, el área necrótica, el peso específico de las hojas, el peso seco y fresco por fruto, y la relación brote/raíz. Los resultados indicaron que la acumulación de sales en plantas de fresa reduce el vigor, retarda el crecimiento y disminuye la producción de biomasa. Se observaron con frecuencia lesiones de quemado medianas a severas en los bordes de las hojas de acuerdo con la concentración de sales en el suelo. Entre los tres cultivares de fresa evaluados, Sweet Charlie fue más tolerante al estrés por salinidad en comparación con los demás cultivares.height: 115%;">

  15. Polymorphic microsatellites of analysis in cultivars of taro Análise polimórfica por microssatélites em cultivares de taro

    Directory of Open Access Journals (Sweden)

    Raquel SC Nunes

    2012-03-01

    Full Text Available Taro (Colocasia esculenta is a tuberous plant belonging to the Araceae family whose tuber is the 14th most consumed food crop in the world. Characterized as an unconventional vegetable, taro is grown in Brazil as a subsistence crop, but in recent years began to gain commercial importance, especially in the states of Espirito Santo, Minas Gerais and Rio de Janeiro. To avoid loss of genetic diversity of the local varieties traditionally grown in Brazil a core collection for taro germplasm has been developed by the Instituto Capixaba de Pesquisa, Assistência Técnica e Extensão Rural do estado do Espirito Santo (Incaper. The aim of this study was to perform a molecular characterization of the seven regional core collections. Genetic diversity of the cultivars was investigated by using SSR (Simple Sequence Repeats polymorphisms, in seven loci (Xuqtem55, Xuqtem73, Xuqtem84, Xuqtem88, Xuqtem91, Xuqtem97 and Xuqtem110. Genetic diversity of the cultivars, based on the seven microsatellite alleles, was evaluated by using the software GelCompar II, showed that the loci Xuqtem73, Xuqtem88 and Xuqtem110 were the most informative, featuring 7, 10 and 8 alleles, respectively, a percentage of cultivars with polymorphic alleles of 85, 57 and 100% and identical PIC of 0.91. Based on Xuqtem110 locus analysis, the seven cultivars were grouped in two clusters. Chinês Regional Incaper cultivar was originated from Chinês cultivar which originated the São Bento cultivar, corroborating previous results. Macaquinho and Chinês cultivars were shown to be the primitive ones originating the allelic collections found in the states of Mato Grosso do Sul and Espirito Santo.O taro (Colocasia esculenta é uma hortaliça da família Araceae cujo rizoma é o décimo quarto alimento vegetal mais consumido no mundo. Caracterizado como uma hortaliça não convencional, o taro é cultivado no Brasil como uma cultura de subsistência, mas nos últimos anos começou a ser

  16. Effects of Site and Cultivar on Consumer Acceptance of Pomegranate.

    Science.gov (United States)

    Chater, John M; Merhaut, Donald J; Jia, Zhenyu; Arpaia, Mary Lu; Mauk, Peggy A; Preece, John E

    2018-05-01

    Pomegranate (Punica granatum L.) is an important fruit in many cultures. The fruit and juice have risen in popularity as it was discovered that pomegranate has relatively high antioxidant activity compared to most other fruits. In this study, six cultivars were utilized to determine consumer acceptance compared to the industry standard, 'Wonderful,' which comprises 90% to 95% of commercial production in the United States. Fruit were sourced from 2 cultivar field trials, one in inland Riverside, California, and one in coastal Ventura County, California. Cultivars selected for the study included 'Eversweet,' 'Green Globe,' 'Haku Botan,' 'Loffani,' 'Phoenicia,' 'Wonderful,' and 'cv. 857,' an heirloom cultivar from Ventura County, CA, U.S.A. Pomegranate arils were subject to sensory evaluation by 87 untrained consumer panelists in late 2016. Panelists were given pomegranate arils and asked to score the samples using a 9-point Hedonic scale for the following fruit quality traits: aril color, sweetness, tartness, seed hardness, bitterness, and overall desirability. There were significant differences among cultivars for all traits assessed by the sensory panelists. There were differences in acceptance among consumers for 'Wonderful' depending on if it was grown on the coast versus inland, and consumers preferred inland- versus coastal-grown 'Wonderful.' 'Wonderful' pomegranate was associated with cultivars that consumers scored low on desirability for bitterness. Cultivars that scored well in overall desirability compared with 'Wonderful' were 'cv. 857,' 'Eversweet,' 'Green Globe,' and 'Phoenicia.' Consumer sensory panels are important to determine scientifically which cultivars are desired by the public. These panels allowed for the determination of which pomegranate cultivars are liked or disliked by consumers and why. If the pomegranate growers know the most desirable cultivars for consumers, they are more likely to adopt and plant them, thus potentially increasing the

  17. Adaptation of cotton cultivars | Wondimu | African Crop Science ...

    African Journals Online (AJOL)

    For each cultivar a linear regression of yield on the mean yield of all cultivars for each year was computed to measure cultivar adaptation. The cultivars with the highest mean yield exhibited a similar degree of adaptation to different environments with regression coefficient close to 1.0. For example, the breeding lines, Acala ...

  18. Adult height, dietary patterns, and healthy aging.

    Science.gov (United States)

    Ma, Wenjie; Hagan, Kaitlin A; Heianza, Yoriko; Sun, Qi; Rimm, Eric B; Qi, Lu

    2017-08-01

    Background: Adult height has shown directionally diverse associations with several age-related disorders, including cardiovascular disease, cancer, decline in cognitive function, and mortality. Objective: We investigated the associations of adult height with healthy aging measured by a full spectrum of health outcomes, including incidence of chronic diseases, memory, physical functioning, and mental health, among populations who have survived to older age, and whether lifestyle factors modified such relations. Design: We included 52,135 women (mean age: 44.2 y) from the Nurses' Health Study without chronic diseases in 1980 and whose health status was available in 2012. Healthy aging was defined as being free of 11 major chronic diseases and having no reported impairment of subjective memory, physical impairment, or mental health limitations. Results: Of all eligible study participants, 6877 (13.2%) were classified as healthy agers. After adjustment for demographic and lifestyle factors, we observed an 8% (95% CI: 6%, 11%) decrease in the odds of healthy aging per SD (0.062 m) increase in height. Compared with the lowest category of height (≤1.57 m), the OR of achieving healthy aging in the highest category (≥1.70 m) was 0.80 (95% CI: 0.73, 0.87; P -trend healthy aging ( P -interaction = 0.005), and among the individual dietary factors characterizing the prudent dietary pattern, fruit and vegetable intake showed the strongest effect modification ( P -interaction = 0.01). The association of greater height with reduced odds of healthy aging appeared to be more evident among women with higher adherence to the prudent dietary pattern rich in vegetable and fruit intake. Conclusions: Greater height was associated with a modest decrease in the likelihood of healthy aging. A prudent diet rich in fruit and vegetables might modify the relation. © 2017 American Society for Nutrition.

  19. Forecasting grain size distribution of coal cut by a shearer loader

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, W; Chodura, J; Siwiec, J

    1983-02-01

    Analyzed are effects of shearer loader design on grain size distribution of coal, particularly on proportion of the finest size group and proportion of largest coal grains. The method developed by the IGD im. A.A. Skochinski Institute in Moscow is used. Effects of cutting tool design and mechanical coal properties are analyzed. Of the evaluated factors, two are of decisive importance: thickness of the coal chip cut by a cutting tool and coefficient of coal disintegration which characterizes coal behavior during cutting. Grain size distribution is also influenced by cutting tool geometry. Two elements of cutting tool design are of major importance: dimensions of the cutting edge and angle of attack. Effects of cutting tool design and coal mechanical properties on grain size distribution are shown in 12 diagrams. Using the forecasting method developed by the IGD im. A.A. Skochinski Institute in Moscow grain size distribution of coal cut by three shearer loaders is calculated: the KWB-3RDU with a drum 1600 mm in diameter, the KWB-6W with a drum 2500 mm in diameter, and a shearer loader being developed with a 1550 mm drum. The results of comparative evaluations are shown in two tables. 5 references.

  20. Metabolomics-Driven Nutraceutical Evaluation of Diverse Green Tea Cultivars

    Science.gov (United States)

    Ida, Megumi; Kosaka, Reia; Miura, Daisuke; Wariishi, Hiroyuki; Maeda-Yamamoto, Mari; Nesumi, Atsushi; Saito, Takeshi; Kanda, Tomomasa; Yamada, Koji; Tachibana, Hirofumi

    2011-01-01

    Background Green tea has various health promotion effects. Although there are numerous tea cultivars, little is known about the differences in their nutraceutical properties. Metabolic profiling techniques can provide information on the relationship between the metabolome and factors such as phenotype or quality. Here, we performed metabolomic analyses to explore the relationship between the metabolome and health-promoting attributes (bioactivity) of diverse Japanese green tea cultivars. Methodology/Principal Findings We investigated the ability of leaf extracts from 43 Japanese green tea cultivars to inhibit thrombin-induced phosphorylation of myosin regulatory light chain (MRLC) in human umbilical vein endothelial cells (HUVECs). This thrombin-induced phosphorylation is a potential hallmark of vascular endothelial dysfunction. Among the tested cultivars, Cha Chuukanbohon Nou-6 (Nou-6) and Sunrouge (SR) strongly inhibited MRLC phosphorylation. To evaluate the bioactivity of green tea cultivars using a metabolomics approach, the metabolite profiles of all tea extracts were determined by high-performance liquid chromatography-mass spectrometry (LC-MS). Multivariate statistical analyses, principal component analysis (PCA) and orthogonal partial least-squares-discriminant analysis (OPLS-DA), revealed differences among green tea cultivars with respect to their ability to inhibit MRLC phosphorylation. In the SR cultivar, polyphenols were associated with its unique metabolic profile and its bioactivity. In addition, using partial least-squares (PLS) regression analysis, we succeeded in constructing a reliable bioactivity-prediction model to predict the inhibitory effect of tea cultivars based on their metabolome. This model was based on certain identified metabolites that were associated with bioactivity. When added to an extract from the non-bioactive cultivar Yabukita, several metabolites enriched in SR were able to transform the extract into a bioactive extract

  1. Variation of Citrus cultivars in Egypt assessed by RAPDs, cluster ...

    African Journals Online (AJOL)

    DR-Seham

    2012-11-13

    Nov 13, 2012 ... for the low productivity are inappropriate cultivation practices, old trees, lack ... the development of high yielding varieties (Golein et al.,. 2012). Thus .... maintained when trees are grown from seeds, cultivars are susceptible to ...

  2. CULTIVAR RELEASE - BRSMG União: common bean cultivar with jalo grain for the state of Minas Gerais

    Directory of Open Access Journals (Sweden)

    Magno Antonio Patto Ramalho

    2012-12-01

    Full Text Available The bean cultivar BRSMG União as a new option of a bean cultivar with jalo grains for the state of Minas Gerais. The cultivar BRSMG União had an average grain yield of 9.8% above the mean of the controls (Jalo EEP 558 and BRS Radiante and was resistant to powdery-mildew.

  3. Growth Response of Two Phaseolus mungo L. Cultivars Induced by Arbuscular Mycorrhizal Fungi and Trichoderma viride

    Directory of Open Access Journals (Sweden)

    Navnita Sharma

    2016-01-01

    Full Text Available The present investigation aimed to quantify the difference in response of two Phaseolus mungo L. cultivars (i.e., UH-1 and IPU-94-1 to Glomus mosseae (G, that is, Funneliformis mosseae, Acaulospora laevis (A, and Trichoderma viride (T, in different combinations or alone. All the treatments were inoculated with Bradyrhizobium japonicum to ensure nodulation as soil used in the experiment was sterilized. After 120 days of inoculation, plants were analyzed for chlorophyll content, nodulation, mycorrhization, leaf area, and protein content. Results indicate variation in growth response of two cultivars with different treatments. Triple inoculation of plants with G + A + T proved to be the best treatment for growth followed by G + T in both cultivars. Our work allowed the selection of P. mungo L. cultivar UH-1 as highly mycorrhizal responsive as compared to IPU-94-1 and G. mosseae to be an efficient bioinoculant as compared to A. laevis for growth enhancement of P. mungo. Further characterization of P. mungo genotypes will enhance our knowledge of physiological and genetic mechanism behind increase in plant growth and yield due to AM symbiosis.

  4. Use of electronic tongue for differentiation of tomato taste by cultivar, harvest maturity, and chilling or heating exposure

    Science.gov (United States)

    The objective of this research was to evaluate whether an electronic-tongue (etongue) could differentiate “taste” profiles of tomato fruit between different cultivars, harvest maturities, and postharvest chilling or heating exposure. The four cultivars included: two common commercial cultivars, ‘Tyg...

  5. Performance of different tomato cultivars under organic and inorganic regimes

    International Nuclear Information System (INIS)

    Ali, I.; Khattak, A. M.; Ali, M.; Ullah, K.

    2015-01-01

    To study the performance of different tomato cultivars under organic and inorganic regimes an experiment was conducted at New Developmental Farm, The University of Agriculture, Peshawar, Pakistan during the summer 2013-14. The experiment was laid out in RCBD with split plot arrangement having four replications. Organic regimes (FYM, poultry manure and mushroom compost) and inorganic (NPK) regimes were allotted to main plot, while cultivars (Roma VF, Roma, Super Classic, Bambino and Rio Grande) were subjected to sub plots. Organic and Inorganic regimes significantly (P ≤ 0.01) influenced all the studied attributes of tomato cultivars. Among different cultivars, Roma gave maximum plant survival (93.8 percentage), number of leaves plant (84.1), number of flower inflorescence (5.4), number of fruits inflorescence (4.3), number of fruit plant (25.4), fruit size (63.9 cm) fruit weight plant (9.1 kg) and total yield (22.9 t ha). However, it was closely followed by cultivar Rio Grande for number of leaves plant (79.6), number of flower inflorescence (5.1), number of fruits inflorescence (4.0) and number of fruits plant (24.9). Cultivar Super Classic produced minimum number of leaves plant (67.7), flower inflorescence (4.8), fruit size (60.6 cm), fruit weight plant (8.6 kg) and total yield (21.7 t ha). Similarly, highest plant survival (90.0 percentage), number of flower inflorescence (5.1), number of fruits inflorescence (4.0), number of fruit plant (25.4), fruit size (62.4 ml), fruit weight plant (8.90 kg) and total yield (22.9 t ha) were recorded in plants provided with organic conditions Roma cultivar performed better than other cultivars under the agro climatic condition of Peshawar followed by cultivar Rio Grande. Therefore, organic tomato production, and these two cultivars are recommended to be grown in Peshawar area. (author)

  6. Quantification of energy from early cultivars of sugarcane; Quantificacao da energia a partir de cultivares precoces de cana-de-acucar

    Energy Technology Data Exchange (ETDEWEB)

    Santin, Ivan; Silva Neto, Helio F. da; Tasso Junior, Luiz Carlos; Marques, Diogo; Marques, Marcos O. [Universidade Estadual Paulista (FCAV/UNESP), Jabotical, SP (Brazil). Fac. de Ciencias Agrarias e Veterinarias. Dept. de Tecnologia], E-mail: santinivan@hotmail.com

    2010-07-01

    The success of energy generation from biomass of sugarcane is related to the amount of bagasse produced and the improvements of the equipment involved in the thermal balance of the sugarcane industrialization process. In this sense, the objective of this study was to quantify the production and productivity of bagasse in different early cultivars of sugarcane. The experimental design was a randomized block design with 6 treatments (cultivars) and 3 replications. The experiment was carried out at FCAV/UNESP-Jaboticabal. To calculate the productivity, the number of stems was counted in a meter, the weight of stems was obtained. The percentage of fiber for each cultivar was determined by calculating the estimated production and productivity of mulch. Using these values to estimate the potential number of people who would benefit from the energy generated by the combustion of bagasse an evolving process of cogeneration power. Cultivar CTC 16 (best results), showed the highest value of TCH (100.66 t ha{sup -1}), production of bagasse (315.66 kg t {sup -1}), any product residue (32.00 t ha{sup -1}) and people who could benefit (9.33 x 106). The Cultivars SP91-1049 and IACSP93-3046 presented the results less satisfactory. (author)

  7. Interaction Between An Insect Pseudotheraptus devastans dist And A Fungus Colletotrichum gloeosporioides penz On Setting Of Anthracnose On Cassava Cuttings

    Directory of Open Access Journals (Sweden)

    Makambila, C.

    1994-01-01

    Full Text Available Interaction of an insect Pseudotheraptus devastans and of a fungus Colletotrichum gloeosporioides on cassava anthracnose development has been studied. Disease setting is made in two stages : realization of wounds on cassava cuttings by Pseudotheraptus devastans, then invasion of those ones by Colletotrichum gloeosporioides. Infection also needs a high level of relative humidity (87 % and a favourable temperature. Optimal values are situated between 24 and 28°C.

  8. Effect of lentil cultivar on N2 fixation and N partitioning

    International Nuclear Information System (INIS)

    Kurdali, F.; Kalifa, K.; Al-Shamma, M.

    1996-12-01

    The study conducted on five lentil cultivars. the results showed that dry matter production, nodulation and N sup 2 fixation were influenced by the cultivar. Beyond flowering, N sup 2 fixation, soil N uptake, and N and P remobilization differed by the cultivar. (author). 32 Refs., 7 Figs., 9 Tabs

  9. Genetic diversity of high performance cultivars of upland and irrigated Brazilian rice.

    Science.gov (United States)

    Coelho, G R C; Brondani, C; Hoffmann, L V; Valdisser, P A M R; Borba, T C O; Mendonça, J A; Rodrigues, L A; de Menezes, I P P

    2017-09-21

    The objective of this study was to analyze the diversity and discrimination of high-performance Brazilian rice cultivars using microsatellite markers. Twenty-nine rice cultivars belonging to EMBRAPA Arroz e Feijão germplasm bank in Brazil were genotyped by 24 SSR markers to establish their structure and genetic discrimination. It was demonstrated that the analyzed germplasm of rice presents an expressive and significant genetic diversity with low heterogeneity among the cultivars. All 29 cultivars were differentiated genetically, and were organized into two groups related to their upland and irrigated cultivation systems. These groups showed a high genetic differentiation, with greater diversity within the group that includes the cultivars for irrigated system. The genotyping data of these cultivars, with the morphological e phenotypical data, are valuable information to be used by rice breeding programs to develop new improved cultivars.

  10. Caracterização botânica de cultivares de morangueiro Botanical characterization of strawberry cultivars

    Directory of Open Access Journals (Sweden)

    Rachel Benetti Queiroz Voltan

    1996-01-01

    leaflet blade base angle and stipules length; primary flower position regarding the canopy; petal number of primary flowers; petal length and width ratio; ovary receptacle; fruit shape; fruit base shape; calix and epicalix position; internal hollow in the fruit; fruit length and width. One analytical key aimed to identify the six cultivars. AGF 080 and Campinas cultivars did not differ by the analysed characters.

  11. Seed Priming to Overcome Salinity Stress in Persian Cultivars of Alfalfa (Medicago sativa L.

    Directory of Open Access Journals (Sweden)

    Ali SEPEHRI

    2015-03-01

    Full Text Available In order to investigate the effect of hydro-priming on seed germination with distilled water on germination of five Alfalfa cultivars under salinity stress, an experiment was conducted as a factorial experiment based on a completely randomized design with three replications. Seven levels of hydro-priming and salinity of NaCl including prime and non-salinity, prime and 50 mM salinity, prime and 100 mM salinity, prime and 150 mM salinity, prime and 200 mM salinity, prime and 250 mM salinity and without prime and salinity and five alfalfa varieties, including ‘Hamedani’, ‘Isfahani’, ‘Bami’, ‘Yazdi’ and ‘Ghareh Yonjeh’ were used. The results showed that the main effect of prime, salinity and cultivars and their interaction in all studied traits were significantly affected at the 5% probability level. Priming treatments in non-salinity of all cultivars were the highest. In all cultivars, final germination percentage, length and weight of radicle, plumule and seedling, germination rate and time, relative radicle elongation, vigor index and stress index, were significantly improved in response to priming in salinity levels of 50-200 mM, compared to control. Radicle produced higher length and weight than the plumule in hydro- priming and salinity treatments. ‘Hamedani’ cultivar in most of studied characteristics had a better response than others. The lowest response to salinity stress and priming was observed in ‘Yazdi’ cultivar.

  12. Assessment of abrasiveness for research of rock cutting

    Directory of Open Access Journals (Sweden)

    Milan Labaš

    2012-12-01

    Full Text Available Rock abrasiveness is ability of rock to wear down the working tool during the mutual interaction between the working indentorand the rock in the mechanical rock cutting process. The cutting indentor is worn down during the interaction, which changes itsgeometric dimensions causing the enlargement of a contact area between the tool and the rock surface. The changes in these dimensionsconsequently alter the rate of advance of the drilling machine and the specific cutting energy. We have determined the abrasivenessaccording to the norm ON 44 1121 (1982 on the testing device constructed at the Institute of Geotechnics SAS.

  13. Genome-wide indel markers shared by diverse Asian rice cultivars compared to Japanese rice cultivar ?Koshihikari?

    OpenAIRE

    Yonemaru, Jun-ichi; Choi, Sun Hee; Sakai, Hiroaki; Ando, Tsuyu; Shomura, Ayahiko; Yano, Masahiro; Wu, Jianzhong; Fukuoka, Shuichi

    2015-01-01

    Insertion-deletion (indel) polymorphisms, such as simple sequence repeats, have been widely used as DNA markers to identify QTLs and genes and to facilitate rice breeding. Recently, next-generation sequencing has produced deep sequences that allow genome-wide detection of indels. These polymorphisms can potentially be used to develop high-accuracy polymerase chain reaction (PCR)-based markers. Here, re-sequencing of 5 indica, 2 aus, and 3 tropical japonica cultivars and Japanese elite cultiva...

  14. Propagation by Cuttings, Layering and Division

    OpenAIRE

    Relf, Diane; Ball, Elizabeth Carter

    2009-01-01

    The major methods of asexual propagation are cuttings, layering, division, and budding/grafting. Cuttings involve rooting a severed piece of the parent plant; layering involves rooting a part of the parent and then severing it; and budding and grafting are joining two plant parts from different varieties.

  15. Contaminated Metal Components in Dismantling by Hot Cutting Processes

    International Nuclear Information System (INIS)

    Cesari, Franco G.; Conforti, Gianmario; Rogante, Massimo; Giostri, Angelo

    2006-01-01

    During the preparatory dismantling activities of Caorso's Nuclear Power Plant (NPP), an experimental campaign using plasma and oxyacetylene metal cutting processes has been performed and applied to plates and tubes exposed to the coolant steam of the reactor. The plant (Boiling Water Reactor, 870 MWe) was designed and built in the 70's, and it was fully operating by 1981 to 1986 being shut down after 1987 Italy's poll that abrogated nuclear power based on U235 fission. The campaign concerns no activated materials, even if the analyses have been performed of by use contaminated components under the free release level, not yet taking into account radioactivity. In this paper, the parameters related to inhalable aerosol, solid and volatile residuals production have been, studied during hot processes which applies the same characteristics of the cutting in field for the dismantling programs of Caorso NPP. The technical parameters such as cutting time and cutting rate vs. pipe diameter/thickness/schedule or plate thickness for ferritic alloys and the emissions composition coming from the sectioning are also reported. The results underline the sort of trouble that can emerge in the cutting processes, in particular focusing on the effects comparison between the two cutting processes and the chemical composition of powders captured by filtering the gaseous emission. Some preliminary considerations on methodology to be used during the dismantling have been presented. (authors)

  16. Oil and fatty acid composition of peanut cultivars grown in Pakistan

    International Nuclear Information System (INIS)

    Hassan, F.; Ahmed, M.

    2012-01-01

    Quality and flavor of edible peanuts and its products are affected by fatty acid composition of oil. The information related to chemical composition of Peanut grown in the country are scarce, therefore, the present investigation was designed to determine the oil and fatty acid composition of some commonly grown peanut cultivars in Pakistan. Seven Peanut cultivars were grown during 2008 in randomized complete block design replicated thrice. The tested cultivars differed significantly for oil content which ranged from 49.83 to 53.06% on dry weight basis, thus showing differences of 7% among cultivars. The saturated fatty acids (Palmetic and Stearic acid) in different cultivars ranged between 9.95 to 10.79% and 1.63 to 2.19%, respectively. Differences among cultivars for oleic acid exhibited significance which ranged between 49.34 to 54.83%. Similarly, cultivars differed statistically for linoleic ac id which showed a range of 28.99 to 34.23%, thus depicted difference of 7%. Significant differences among tested cultivars may be attributed to the place of origin of particular cultivar. An inverse relationship was exhibited between oleic and linoleic acid, similar to other edible oils. (author)

  17. Characteristics of emulsion chamber family events produced at low heights

    International Nuclear Information System (INIS)

    Jing, G.; Jing, C.; Zhu, Q.; Ding, L.

    1985-01-01

    The uncertainty of primary cosmic ray composition at 10 to the 14th power -10 to the 16th power eV is well known making the study of nuclear interaction mechanisms more difficult. Experimentally if one can identify effectively the family events produced at low heights, then an induced by primary protons might be separated. In this paper an attempt is made to simulate a family of events under the conditions of a mountain emulsion chamber experiments using a reasonable model. The aim is to search for the dependence of some experimentally observable quantities on the interaction height

  18. Adaptation to partial resistance to powdery mildew in the hop cultivar Cascade by Podosphaera macularis

    Science.gov (United States)

    The hop cultivar Cascade has been grown in the Pacific Northwestern U.S. with minimal input for management of powdery mildew (Podosphaera macularis) for nearly 20 years due to the putatively quantitative resistance in this cultivar. While partial resistance is generally thought to be more durable th...

  19. Caracterização molecular de cultivares de cebola com marcadores microssatélites Molecular characterization of onion cultivars using microsatellite markers

    Directory of Open Access Journals (Sweden)

    Carlos Antonio Fernandes Santos

    2010-01-01

    Full Text Available O objetivo deste trabalho foi estabelecer padrões alélicos e estimar as distâncias genéticas baseadas em marcador SSR de 44 cultivares de cebola adaptadas às condições de cultivo tropicais e subtropicais do Brasil. Para visualização da similaridade genética, utilizou-se o dendrograma UPGMA gerado da matriz de distâncias do coeficiente de Jaccard, com base em 40 alelos de 13 locos SSR. O DNA total foi extraído pelo método CTAB 2x, e os produtos de PCR foram analisados em géis de poliacrilamida desnaturante 6% e corados com nitrato de prata. O número de pares de bases foi estimado pelo método da mobilidade inversa, com base em regressão de produtos de tamanho conhecido. A média da heterozigosidade dos locos SSR foi 0,58. Os 40 alelos dos 13 locos SSR foram suficientes para distinguir as 44 cultivares de cebola. O maior número de alelos em comum foi observado entre as cultivares Yellow Granex e Henry's Special PRR e o menor, entre as cultivares Baia Periforme Super Precoce e Excel. Os sete grupos principais de cultivares identificados no dendrograma apresentaram concordância com a genealogia conhecida e o tipo agronômico das cultivares avaliadas. Os locos SSR selecionados são adequados para melhoramento e proteção de cultivares da espécie.The objective of this work was to establish allelic patterns and to estimate genetic distances based on the SSR marker in 44 onion cultivars adapted to Brazil's tropical and subtropical growing conditions. An UPGMA dendrogram generated from the distance matrix of the Jaccard's coefficient, based on 40 alleles of 13 SSR loci, was used for visualizing genetic similarities. Total DNA was extracted according to the CTAB 2x protocol, and the PCR products were analyzed in 6% denaturing polyacrylamide gels and stained with silver nitrate. The number of base pairs was estimated by the inverse mobility method, based on regression of products of known size. The heterozygosity mean was 0.58 for all

  20. Effects of Soybean Cultivars on Soymilk Quality

    Directory of Open Access Journals (Sweden)

    Aziadekey, M.

    2001-01-01

    Full Text Available Soymilk was prepared from twelve soybean cultivars grown under the same environmental conditions to evaluate their effects on soymilk characteristics. Significant correlations were observed between the Chemical composition of the seeds and the resultant soymilk. Soymilk solids were significantly affected by seed size and seed phosphorus contents. Cultivars with dark hilum produced soymilk with less attractive colour.