WorldWideScience

Sample records for culicidae iii plasticity

  1. Sexually dimorphic body size and development time plasticity in Aedes mosquitoes (Diptera: Culicidae).

    Science.gov (United States)

    Wormington, Jillian D; Juliano, Steven A

    Sexual size dimorphism (SSD) in insects often accompanies a sexual difference in development time, sexual bimaturism (SBM). To determine whether three Aedes mosquito species have similar plasticity in SSD, attain sexual dimorphism through similar strategies, and whether SSD and SBM are associated. Aedes albopictus, Aedes aegypti, and Aedes triseriatus (Diptera: Culicidae). In four different food availability environments, we quantified plastic responses of relative growth rate (RGR), development time, and adult body size in individually reared males and females. Food availability affected RGR differently for the sexes for all three species. The RGR of males and females differed significantly in the 0.1 g/L food treatment. This difference did not account for observed SSD. Food levels over which the largest changes in RGR were observed differed among the species. Male and female adult mass and development time were jointly affected by food availability in a pattern that differed among the three species, so that degree of SSD and SBM changed differentially with food availability for all three species. Development time was generally less sexually dimorphic than mass, particularly in A. albopictus. At lower food levels, A. aegypti and A. triseriatus had accentuated dimorphism in development time. These results, combined with our knowledge of mosquito life history, suggest that a direct benefit of SBM is improbable for mosquitoes and that the observed intersexual differences in development time are more likely byproducts of selection for SSD.

  2. Intra-population plasticity of Anopheles darlingi's (Diptera, Culicidae biting activity patterns in the state of Amapá, Brazil

    Directory of Open Access Journals (Sweden)

    Voorham Jaco

    2002-01-01

    Full Text Available OBJECTIVE: To assess the variation in Anopheles darlingi's biting activity compared to An. marajoara in the same locality and to biting activity data from other regions. METHODS: Using human bait, eight observations of the biting activity of An. darlingi and An. marajoara were carried out during 1999 and 2000 in the municipality of São Raimundo do Pirativa, state of Amapá, Brazil. Each observation consisted of three consecutive 13-hour collections, close to full moon. There were shifts of collectors in the observation points and nocturnal periods. RESULTS: An. darlingi revealed considerable plasticity of biting activity in contrast to An. marajoara, which showed well-defined crepuscular biting peaks. No significant correlation between density and biting activity was found, but a significant correlation existed between time and proportional crepuscular activity, indicating underlying ecological processes not yet understood. Two of the four available data sets having multiple observations at one locality showed considerable plasticity of this species' biting patterns as well. CONCLUSION: Intra-population variation of biting activity can be as significant as inter-population variation. Some implications in malaria vector control and specific studies are also discussed.

  3. Synthesis and biological activity of acetates of copper (II and iron (III for the control of Aedes aegypti (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Jéssica V. Nardeli

    2012-06-01

    Full Text Available This work aimed to the synthesis of basic acetates of Cu (II and Fe(III against larvae of Aedes aegypti and Gram negative and Gram positive. The transition metal ions Cu (II and Fe (III have bactericidal activity and are toxic to Aedes aegypti larvae in the eggs and larval stages of initial, precludes the eggs hatch and slow reproductive cycle of the insect. The theme investigates the importance of carboxyl groups in complex formation, transport and cellular internalization of the toxic ions. It is known that the bactericide or insecticide activity is due to metal ions and Cu (IIor Fe (III.

  4. Ecology of mosquitoes (Diptera: Culicidae in areas of Serra do Mar State Park, State of São Paulo, Brazil. III - daily biting rhythms and lunar cycle influence

    Directory of Open Access Journals (Sweden)

    Guimarães Anthony Érico

    2000-01-01

    Full Text Available The ecology of mosquito species (Diptera: Culicidae was studied in areas of the Serra do Mar State Park, State of São Paulo, Brazil. The influence of the lunar cycle and the daily biting rhythms of mosquito populations were analyzed. Systematized biweekly human bait collections were made in a silvatic environment for 24 consecutive months (January 1991 to December 1992. A total of 20,591 specimens of adult mosquitoes belonging to 55 species were collected from 545 catches. Sabethini species were captured exclusively during daylight periods, with the exception of Trichoprosopon digitatum, while members of Anophelinae predominated during nocturnal hours. Members of the subfamily Culicinae that were collected primary during nocturnal periods included Culex nigripalpus, Coquillettidia chrysonotum and Cq. venezuelensis while daytime catches included Psorophora ferox and Ps. albipes. Others members of culicines mosquitoes that were collected during both day and night included: Aedes serratus, Ae. scapularis and Ae. fulvus. Lunar cycles did not appear to influence the daily biting rhythms of most mosquito species in the area, but larger numbers of mosquitoes were collected during the new moon. Ae. scapularis were captured mainly during the full moon.

  5. Myenteric neuronal plasticity induced by Toxoplasma gondii (genotype III on the duodenum of rats

    Directory of Open Access Journals (Sweden)

    Rodrigo M. Papazian-Cabanas

    2012-09-01

    Full Text Available The effects of acute and chronic infection caused by Toxoplasma gondii on duodenal myenteric neurons were analyzed. Eighteen rats were assigned into four groups: Acute Control Group (ACG, n=4; Acute Experimental Group (AEG, n=4; Chronic Control Group (CCG, n=5; and Chronic Experimental Group (CEG, n=5. Rats from the AEG and CEG were inoculated orally with 105 genotype III (BTU-II strain tachyzoites of T. gondii isolated from a dog with neurological signs. Acute groups were killed after 24 hours after the inoculation and the chronic groups after 30 days. Whole-mount from the duodenum were stained with Giemsa. The population density of myenteric neurons, as well the body cell, nuclear and cytoplasmic area were analyzed. Both acute and chronic toxoplasmic infection did not provoke neuronal loss. On the other hand, plastic alterations were observed: decreasing of the nuclear and cytoplasmic area during the acute phase and neuronal hypertrophy during the chronic phase.Foram analisados os efeitos da infecção aguda e crônica provocada pelo Toxoplasma gondii sobre os neurônios mientéricos do duodeno. Dezoito ratos foram divididos em quatro grupos: Grupo Controle Agudo (GCA, n= 4, Grupo Experimental Agudo (GEA, n=4, Grupo Controle Crônico (GCC, n=5 e Grupo Experimental Crônico (GEC, n=5. Os animais do GEA e GEC receberam por via oral 10 5 taquizoítos de Toxoplasma gondii da cepa BTUII (genótipo III isolada de um cão com sintomatologia neurológica. Os grupos agudos foram submetidos à eutanásia após 24 horas e os crônicos após 30 dias da inoculação. Preparados totais do duodeno foram corados com Giemsa. A densidade populacional dos neurônios mientéricos, bem como a área do corpo celular, núcleo e citoplasma foram analisados. Ambas, as infecções toxoplásmicas aguda e crônica não provocaram a perda neuronal. Por outro lado, alterações plásticas foram observadas: diminuição da área nuclear e citoplasmática durante a fase

  6. Crack tip fields in elastic-plastic and mixed mode I+II+III conditions, finite elements simulations and modeling

    Directory of Open Access Journals (Sweden)

    F. Fremy,

    2015-07-01

    Full Text Available This paper is devoted to the analysis of the load path effect on I+II+III mixed mode fatigue crack propagation in a 316L stainless steel. Experiments were conducted in mode I+II and in mode I+II+III. The same maximum, minimum and mean values of the stress intensity factors were used for each loading path in the experiments. The main result of this set of experiments is that very different crack growth rates and crack paths are observed for load paths that are however considered as equivalent in most fatigue criteria. The experiments conducted in mode I+II and in mode I+II+III, also allowed to show that the addition of mode III loading steps to a mode I+II loading sequence is increasing the fatigue crack growth rate, even when the crack path is not significantly modified.

  7. Gastrointestinal stem cells. III. Emergent themes of liver stem cell biology: niche, quiescence, self-renewal, and plasticity.

    Science.gov (United States)

    Theise, Neil D

    2006-02-01

    This essay will address areas of liver stem/progenitor cell studies in which consensus has emerged and in which controversy still prevails over consensus, but it will also highlight important themes that inevitably should be a focus of liver stem/progenitor cell investigations in coming years. Thus concepts regarding cell plasticity, the existence of a physiological/anatomic stem cell niche, and whether intrahepatic liver stem/progenitor cells comprise true stem cells or progenitor cells (or both) will be approached in some detail.

  8. Intra-population plasticity of Anopheles darlingi's (Diptera, Culicidae biting activity patterns in the state of Amapá, Brazil Plasticidade intrapopulacional nos padrões de atividade hematofágica de Anopheles darlingi (Diptera: Culicidae no Estado do Amapá, Brasil

    Directory of Open Access Journals (Sweden)

    Jaco Voorham

    2002-02-01

    Full Text Available OBJECTIVE: To assess the variation in Anopheles darlingi's biting activity compared to An. marajoara in the same locality and to biting activity data from other regions. METHODS: Using human bait, eight observations of the biting activity of An. darlingi and An. marajoara were carried out during 1999 and 2000 in the municipality of São Raimundo do Pirativa, state of Amapá, Brazil. Each observation consisted of three consecutive 13-hour collections, close to full moon. There were shifts of collectors in the observation points and nocturnal periods. RESULTS: An. darlingi revealed considerable plasticity of biting activity in contrast to An. marajoara, which showed well-defined crepuscular biting peaks. No significant correlation between density and biting activity was found, but a significant correlation existed between time and proportional crepuscular activity, indicating underlying ecological processes not yet understood. Two of the four available data sets having multiple observations at one locality showed considerable plasticity of this species' biting patterns as well. CONCLUSION: Intra-population variation of biting activity can be as significant as inter-population variation. Some implications in malaria vector control and specific studies are also discussed.OBJETIVO: Examinar a variação no ciclo de atividade hematofágica de Anopheles darlingi em uma localidade, em comparação com An. marajoara na mesma localidade e com dados de atividade hematofágica de outras regiões. MÉTODOS: Durante 1999 e 2000 foram feitas oito observações da atividade de picar de An. darlingi e An. marajoara, utilizando isca humana, na localidade de São Raimundo do Pirativa, Estado de Amapá, Brasil. Cada observação era composta de três coletas consecutivas de 13 horas, situadas ao redor da ocorrência de lua cheia. Os coletores foram trocados entre os pontos de observação e os períodos noturnos. RESULTADOS: An. darlingi mostrou consider

  9. Impact of livestock on a mosquito community (Diptera: Culicidae) in a Brazilian tropical dry forest

    OpenAIRE

    Cleandson Ferreira Santos; Magno Borges

    2015-01-01

    AbstractINTRODUCTION: This study evaluated the effects of cattle removal on the Culicidae mosquito community structure in a tropical dry forest in Brazil.METHODS: Culicidae were collected during dry and wet seasons in cattle presence and absence between August 2008 and October 2010 and assessed using multivariate statistical models.RESULTS: Cattle removal did not significantly alter Culicidae species richness and abundance. However, alterations were noted in Culicidae community composition.CO...

  10. Temporal patterns of abundance of Aedes aegypti and Aedes albopictus (Diptera: Culicidae) and mitochondrial DNA analysis of Ae. albopictus in the Central African Republic

    National Research Council Canada - National Science Library

    Kamgang, Basile; Ngoagouni, Carine; Manirakiza, Alexandre; Nakouné, Emmanuel; Paupy, Christophe; Kazanji, Mirdad

    2013-01-01

    The invasive Asian tiger mosquito Aedes albopictus (Diptera: Culicidae) was first reported in central Africa in 2000, in Cameroon, with the indigenous mosquito species Ae. aegypti (Diptera: Culicidae...

  11. Impact of livestock on a mosquito community (Diptera: Culicidae in a Brazilian tropical dry forest

    Directory of Open Access Journals (Sweden)

    Cleandson Ferreira Santos

    2015-08-01

    Full Text Available AbstractINTRODUCTION: This study evaluated the effects of cattle removal on the Culicidae mosquito community structure in a tropical dry forest in Brazil.METHODS: Culicidae were collected during dry and wet seasons in cattle presence and absence between August 2008 and October 2010 and assessed using multivariate statistical models.RESULTS: Cattle removal did not significantly alter Culicidae species richness and abundance. However, alterations were noted in Culicidae community composition.CONCLUSIONS: This is the first study to evaluate the impact of cattle removal on Culicidae community structure in Brazil and demonstrates the importance of assessing ecological parameters such as community species composition.

  12. Impact of livestock on a mosquito community (Diptera: Culicidae) in a Brazilian tropical dry forest.

    Science.gov (United States)

    Santos, Cleandson Ferreira; Borges, Magno

    2015-01-01

    This study evaluated the effects of cattle removal on the Culicidae mosquito community structure in a tropical dry forest in Brazil. Culicidae were collected during dry and wet seasons in cattle presence and absence between August 2008 and October 2010 and assessed using multivariate statistical models. Cattle removal did not significantly alter Culicidae species richness and abundance. However, alterations were noted in Culicidae community composition. This is the first study to evaluate the impact of cattle removal on Culicidae community structure in Brazil and demonstrates the importance of assessing ecological parameters such as community species composition.

  13. Plastic Surgery

    Science.gov (United States)

    ... Surgery? A Week of Healthy Breakfasts Shyness Plastic Surgery KidsHealth > For Teens > Plastic Surgery Print A A ... forehead lightened with a laser? What Is Plastic Surgery? Just because the name includes the word "plastic" ...

  14. Plasticity theory

    CERN Document Server

    Lubliner, Jacob

    2008-01-01

    The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and

  15. Anopheles (Anopheles) pseudopunctipennis Theobald (Diptera: Culicidae): Neotype Designation and Description

    Science.gov (United States)

    2004-01-01

    Diptera Ð Culicidae). Guayaquil Univ., Guayaquil, Ecuador. Levi-Castillo, R. 1945. Los anofelinos de la Republica del Ecuador, vol. 1: 1Ð172. Artes ...BritishMuseumNatural History, Lon- don, England. Vargas, L., and A. Martinez Palacios. 1956. Anofelinos mexicanos . Taxonomia y distribucion. Secretaria

  16. An Annotated Bibliography of the Mosquitoes and Mosquito-Borne Diseases of Guam (Diptera: Culicidae)

    Science.gov (United States)

    1976-01-01

    Nematocera . University Press of Hawaii, Honolulu, Hawaii. 618 pp. Family Culicidae; see A. Stone and M.D. Delfinado, 1973. 359 Edgren, D.C., V.S...Culicidae, in Delfinado, M.D. and D.E. Hardy (Eds.), A Catalog of the Diptera of the Oriental Region, Vol. 1: Nematocera , pp. 266-343. University Press

  17. Plastic Jellyfish.

    Science.gov (United States)

    Moseley, Christine

    2000-01-01

    Presents an environmental science activity designed to enhance students' awareness of the hazards of plastic waste for wildlife in aquatic environments. Discusses how students can take steps to reduce the effects of plastic waste. (WRM)

  18. [Highest mosquito records (Diptera: Culicidae) in Venezuela].

    Science.gov (United States)

    Navarro, Juan-Carlos; Del Ventura, Fabiola; Zorrilla, Adriana; Liria, Jonathan

    2010-03-01

    Mosquitoes (Diptera: Culicidae) are holometabolous insects with aquatic immature stages, which use a broad variety of larval habitats, from ground water bodies to Phytothelmata (water deposits in plants) and artificial deposits. The availability of breeding sites often determines the upper limits of mosquito ranges. We built a database with 9,607 records with 432 localities, 19 genera and 254 species. The Andean mountains have 77% of the highest mosquito records including Aedes euris with record at 3,133 m, followed by three species of Anopheles--subgenera Kerteszia--with the upper limit of 2,680 m. Wyeomyia bicornis and Culex daumastocampa at 2,550 m were the highest records in the Central-Coastal cordillera, while the highest record in Pantepui was Wyeomyia zinzala at 2,252 m. The species associated with phytothelmata (Bromeliaceae and Sarraceniaceae) represent 60% of the records. The upper limits of Culex quinquefasciatus and Anopheles (Kerteszia) species could represent the theoretical limit for transmission of filariasis or arboviruses, by Culex, and malaria by Anopheles (Kerteszia) in Venezuela. Similarly, a vector of Dengue, Aedes aegypti, has not been not recorded above 2,000 m.

  19. Plastics Technology.

    Science.gov (United States)

    Barker, Tommy G.

    This curriculum guide is designed to assist junior high schools industrial arts teachers in planning new courses and revising existing courses in plastics technology. Addressed in the individual units of the guide are the following topics: introduction to production technology; history and development of plastics; safety; youth leadership,…

  20. Plastic bronchitis

    National Research Council Canada - National Science Library

    Singhi, Anil Kumar; Vinoth, Bharathi; Kuruvilla, Sarah; Sivakumar, Kothandam

    2015-01-01

    Plastic bronchitis, a rare but serious clinical condition, commonly seen after Fontan surgeries in children, may be a manifestation of suboptimal adaptation to the cavopulmonary circulation with unfavorable hemodynamics...

  1. Plastic Fishes

    CERN Multimedia

    Trettnak, Wolfgang

    2015-01-01

    In terms of weight, the plastic pollution in the world’s oceans is estimated to be around 300,000 tonnes. This plastic comes from both land-based and ocean-based sources. A lecture at CERN by chemist Wolfgang Trettnak addressed this issue and highlighted the role of art in raising people’s awareness. The slideshow below gives you a taste of the artworks by Wolfgang Trettnak and Margarita Cimadevila.

  2. Plastic Bridge

    Institute of Scientific and Technical Information of China (English)

    履之

    1994-01-01

    Already ubiquitous in homes and cars, plastic is now appearing inbridges. An academic-industrial consortium based at the University ofCalifornia in San Diego is launching a three-year research program aimed atdeveloping the world’s first plastic highway bridge, a 450-foot span madeentirely from glass-,carbon,and polymer-fiber-reinforced composite mate-rials, the stuff of military aircraft. It will cross Interstate 5 to connect thetwo sides of the school’s campus.

  3. Aedes aegypti (Diptera: Culicidae) Biting Deterrence: Structure-Activity Relationship of Saturated and Unsaturated Fatty Acids

    Science.gov (United States)

    2012-11-01

    VECTOR CONTROL, PEST MANAGEMENT, RESISTANCE, REPELLENTS Aedes aegypti (Diptera: Culicidae) Biting Deterrence: Structure- Activity Relationship of...deterrent effects of a series of saturated and unsaturated fatty acids against Aedes aegypti (L), yellow fever mosquito (Diptera: Culicidae) using theK...corresponding C12:0 and C12:1 homologues. KEYWORDS fatty acid, biting deterrence, repellent, structure-activity relationship, Aedes aegypti Mosquitoes transmit

  4. An Update on the Potential of North American Mosquitoes (Diptera: Culicidae) to Transmit West Nile Virus

    Science.gov (United States)

    2004-09-22

    Ps. ferox SLE Mammals Day 2 km 0, 8 0 0 Distributionandbionomicsbasedonandgeneralized from information inCarpenter andLaCasse(1955), Darsie ...competence of Culexunivittatus(Diptera:Culicidae) forWestNile virus. J. Med. Entomol. 30: 449Ð456. Darsie , R. F., and R. A. Ward. 1981. IdentiÞcation and...Mitchell, and G. B. Craig Jr . 1993. Host-feeding patterns of Aedes albopictus (Diptera: Culicidae) at a temperate North American site. J. Med. Entomol. 30

  5. GREEN PLASTIC: A NEW PLASTIC FOR PACKAGING

    OpenAIRE

    Mr. Pankaj Kumar*, Sonia

    2016-01-01

    This paper gives a brief idea about a new type of plastic called as bio-plastic or green plastic. Plastic is used as a packaging material for various products, but this plastic is made up of non renewable raw materials. There are various disadvantages of using conventional plastic like littering, CO2 production, non-degradable in nature etc. To overcome these problems a new type of plastic is discovered called bio-plastic or green plastic. Bio-plastic is made from renewable resources and also...

  6. Plastic condoms.

    Science.gov (United States)

    1968-01-01

    Only simple equipment, simple technology and low initial capital investment are needed in their manufacture. The condoms can be made by people who were previously unskilled or only semi-skilled workers. Plastic condoms differ from those made of latex rubber in that the nature of the plastic film allows unlimited shelf-life. Also, the plastic has a higher degree of lubricity than latex rubber; if there is a demand for extra lubrication in a particular market, this can be provided. Because the plastic is inert, these condoms need not be packaged in hermetically sealed containers. All these attributes make it possible to put these condoms on the distributors' shelves in developing countries competitively with rubber condoms. The shape of the plastic condom is based on that of the lamb caecum, which has long been used as luxury-type condom. The plastic condom is made from plastic film (ethylene ethyl acrilate) of 0.001 inch (0.0254 mm.) thickness. In addition, a rubber ring is provided and sealed into the base of the condom for retention during coitus. The advantage of the plastic condom design and the equipment on which it is made is that production can be carried out either in labour-intensive economy or with varying degrees of mechanization and automation. The uniform, finished condom if made using previously untrained workers. Training of workers can be done in a matter of hours on the two machines which are needed to produce and test the condoms. The plastic film is provided on a double wound roll, and condom blanks are prepared by means of a heat-sealing die on the stamping machine. The rubber rings are united to the condom blanks on an assembly machine, which consists of a mandrel and heat-sealing equipment to seal the rubber ring to the base of the condom. Built into the assembly machine is a simple air-testing apparatus that can detect the smallest pinhole flaw in a condom. The manufacturing process is completed by unravelling the condom from the assembly

  7. Ecologia de mosquitos (Diptera: Culicidae em criadouros naturais e artificiais de área rural do Norte do Estado do Paraná, Brasil. V. Coleta de larvas em recipientes artificiais instalados em mata ciliar Mosquito (Diptera: Culicidae ecology of natural and artificial rural breeding places in horthern Parana, Brazil. V. Larvae captured in artificial reservoirs installed in ciliary forest

    Directory of Open Access Journals (Sweden)

    José Lopes

    1997-08-01

    Full Text Available INTRODUÇÃO: A utilização pelos Culicidae de recipientes contendo água para a colocação de seus ovos, em área antropogênica, pode indicar plasticidade genética que os direcione evolutivamente no sentido da domiciliação. Nesse sentido, foram coletadas as diferentes espécies de Culicidae que colonizam recipientes alocados em mata ciliar, na área rural. MATERIAL E MÉTODO: Foram instalados recipientes de pneu, plástico, lata e bambu, em mata ciliar, em área rural no Norte do Paraná, Brasil. RESULTADOS: Coletaram-se larvas de Cx. grupo coronator, Cx. declarator, Cx. laticlasper, Cx. (Melanoconion secção Spissipes, Cx. tatoi, Tr. compressum, Tr. pallidiventer, Ae. terrens, Cx. mollis, Cx. bigoti, Hg. leucocelaenus, Cx. eduardoi, Cx. quinquefasciatus, Li. durhamii e Toxorhynchites sp. As cinco primeiras espécies foram específicas de pneus. As duas espécies de Trichoprosopon ficaram restritas a bambu. Ae. terrens e Cx. mollis foram caletadas em pneu e bambu, Cx. bigoti foi coletada em pneu, lata e bambu, enquanto que Hg. leucocelaenus só não foi encontrada em lata. As quatro últimas espécies foram coletadas em todos os tipos de recipientes. Cx. quinquefasciatus, Cx. eduardoi, Li. durhamii tiveram significante flutuação populacional. CONCLUSÕES: O pneu caracterizou-se como o recipiente mais aceito pelos culicídeos. As áreas onde a mata ciliar esteve mais densa e o locais onde o solo esteve mais úmido foram os pontos com maior número de capturas. A mata ciliar, mesmo muito reduzida e alterada, foi suficiente para abrigar várias espécies de culicídeos. As espécies caputradas podem ser portadoras de plasticidade gênica que as capacitem a colonizar ambientes antropogênicos.INTRODUCTION: The use of receptacles containing water for the laying of the Culicidae eggs in an anthropogenic area, may indicate a genetic plasticity thet leads them evolutionarily towards domiciliation. Thus, the varions species of Culicidae which

  8. Plastic Bronchitis.

    Science.gov (United States)

    Rubin, Bruce K

    2016-09-01

    Plastic bronchitis is an uncommon and probably underrecognized disorder, diagnosed by the expectoration or bronchoscopic removal of firm, cohesive, branching casts. It should not be confused with purulent mucous plugging of the airway as seen in patients with cystic fibrosis or bronchiectasis. Few medications have been shown to be effective and some are now recognized as potentially harmful. Current research directions in plastic bronchitis research include understanding the genetics of lymphatic development and maldevelopment, determining how abnormal lymphatic malformations contribute to cast formation, and developing new treatments. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Mixed plastics recycling technology

    CERN Document Server

    Hegberg, Bruce

    1995-01-01

    Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.

  10. Plastic fish

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    In terms of weight, the plastic pollution in the world’s oceans is estimated to be around 300,000 tonnes. This plastic comes from both land-based and ocean-based sources. A lecture at CERN by chemist Wolfgang Trettnak addressed this issue and highlighted the role of art in raising people’s awareness.   Artwork by Wolfgang Trettnak. Packaging materials, consumer goods (shoes, kids’ toys, etc.), leftovers from fishing and aquaculture activities… our oceans and beaches are full of plastic litter. Most of the debris from beaches is plastic bottles. “PET bottles have high durability and stability,” explains Wolfgang Trettnak, a chemist by education and artist from Austria, who gave a lecture on this topic organised by the Staff Association at CERN on 26 May. “PET degrades very slowly and the estimated lifetime of a bottle is 450 years.” In addition to the beach litter accumulated from human use, rivers bring several ki...

  11. Plastic zonnecellen

    NARCIS (Netherlands)

    Roggen, Marjolein

    1998-01-01

    De zonnecel van de toekomst is in de maak. Onderzoekers van uiteenlopend pluimage werken eendrachtig aan een plastic zonnecel. De basis is technisch gelegd met een optimale, door invallend licht veroorzaakte, vorming van ladingdragers binnen een composiet van polymeren en buckyballs. Nu is het zaak

  12. Mosquitoes (Diptera: Culicidae) in Mauritania: a review of their biodiversity, distribution and medical importance.

    Science.gov (United States)

    Mint Mohamed Lemine, Aichetou; Ould Lemrabott, Mohamed Aly; Hasni Ebou, Moina; Mint Lekweiry, Khadijetou; Ould Ahmedou Salem, Mohamed Salem; Ould Brahim, Khyarhoum; Ouldabdallahi Moukah, Mohamed; Ould Bouraya, Issa Nabiyoullahi; Brengues, Cecile; Trape, Jean-François; Basco, Leonardo; Bogreau, Hervé; Simard, Frédéric; Faye, Ousmane; Ould Mohamed Salem Boukhary, Ali

    2017-01-19

    Although mosquitoes (Diptera: Culicidae) are important disease vectors, information on their biodiversity in Mauritania is scarce and very dispersed in the literature. Data from the scientific literature gathered in the country from 1948 to 2016 were collected and analyzed. Overall 51 culicid species comprising 17 Anopheles spp., 14 Aedes spp., 18 Culex spp. and two Mansonia spp. have been described in Mauritania among which Anopheles arabiensis, Aedes vexans, Culex poicilipes and Culex antennatus are of epidemiological significance. Anopheles arabiensis is widely distributed throughout the country and its geographic distribution has increased northwards in recent years, shifting its northern limit form 17°32'N in the 1960s to 18°47'N today. Its presence in the central region of Tagant highlights the great ecological plasticity of the species. Conversely, the distribution of Anopheles gambiae (s.s.) and Anopheles melas has shrunk compared to that of the 1960s. Anopheles rhodesiensis and An. d'thali are mainly confined in the mountainous areas (alt. 200-700 m), whereas Anopheles pharoensis is widely distributed in the Senegal River basin. Culex poicilipes and Cx. antenattus were naturally found infected with Rift valley fever virus in central and northern Mauritania following the Rift valley outbreaks of 1998 and 2012. Recently, Ae. aegypti emerged in Nouakchott and is probably responsible for dengue fever episodes of 2015. This paper provides a concise and up-to-date overview of the existing literature on mosquito species known to occur in Mauritania and highlights areas where future studies should fill a gap in knowledge about vector biodiversity. It aims to help ongoing and future research on mosquitoes particularly in the field of medical entomology to inform evidence-based decision-making for vector control and management strategies.

  13. Plastic Surgery Statistics

    Science.gov (United States)

    ... PSN PSEN GRAFT Contact Us News Plastic Surgery Statistics Plastic surgery procedural statistics from the American Society of Plastic Surgeons. Statistics by Year Print 2016 Plastic Surgery Statistics 2015 ...

  14. Mosquito Fauna (Diptera: Culicidae of Hamedan County, Western Iran.

    Directory of Open Access Journals (Sweden)

    Amir Hossein Zahirnia

    2014-12-01

    Full Text Available This study aimed to identify and determine the larval and adult mosquitoes (Culicidae fauna in Hamedan County, western Iran.It was a cross-sectional study which took place in four area of the Hamedan County. Sampling methods for larvae, pupae and adults were dipping, hand catch, night catch and total catch. Larvae and adult mosquitoes collected and were sent to laboratory of Medical Entomology, Hamedan University of Medical Sciences, Hamedan, Iran for further identification to species level to determination of fauna. Data analysis was performed using SPSS software version19.Three genera and eight species of family Culicidae were collected and identified in Hamedan County, Hamedan Province, West Iran, during May to October 2013. These species included: Culex theileri, Cx. pipiens, Cx. antennatus, Culiseta subochrea, Cs. langiareolata, Anopheles superpictus, An. maculipennis and An. stephensi. The species Cx. antennatus and An. stephensi were reported for the first time in Hamedan County.An. stephensi and Cx. antennatus caught had not been previously recorded in Hamedan Province. Due to vast agricultural activities in the province which provides suitable environment for the establishment of various species of mosquitoes and since many of them are potential vectors of human and domesticated animal pathogens, their ecology needs to be studied extensively.

  15. Plastic bronchitis

    Directory of Open Access Journals (Sweden)

    Anil Kumar Singhi

    2015-01-01

    Full Text Available Plastic bronchitis, a rare but serious clinical condition, commonly seen after Fontan surgeries in children, may be a manifestation of suboptimal adaptation to the cavopulmonary circulation with unfavorable hemodynamics. They are ominous with poor prognosis. Sometimes, infection or airway reactivity may provoke cast bronchitis as a two-step insult on a vulnerable vascular bed. In such instances, aggressive management leads to longer survival. This report of cast bronchitis discusses its current understanding.

  16. [English and Russian terminology for the thoracic skeletal structures of mosquitoes (Diptera: Culicidae): a critical review].

    Science.gov (United States)

    Khalin, A V; Aĭbulatov, S V

    2013-01-01

    The authors analyze different names of thoracic skeletal structures in mosquitoes (Dip- tera: Culicidae), used by various authors (Kirkpatrick, 1925; Edwards, 1932; Stackelberg, 1937; Sazonova, 1958; Belkin, 1962a, b: Maslov, 1967: Gutsevich et al., 1970; Knight, Laffoon, 1970; McAlpine, 1981; Becker et al., 2010). In the abovementioned publications, a small number of skeletal structures, morphologically very important for the identification of species and genera of the family Culicidae, are denoted by multiple synonymic names, while certain completely different skeletal structures are represented under a single homonymous name. Duplicated synonymic names for thoracic sclerites, setae, and scales on sclerites considerably hamper the work of specialists determining species of the family Culicidae. In some cases, this fact results in erroneous diagnostics of species. We provide a detailed description of the thoracic morphology of mosquitoes, pointing to existing synonymic Russian and English names for each skeletal structure and also recommend the use of a single Russian term for each structure.

  17. The Cretaceous Fossil Burmaculex antiquus Confirmed as the Earliest Known Lineage of Mosquitoes (Diptera: Culicidae).

    Science.gov (United States)

    Borkent, Art; Grimaldi, David A

    2016-01-01

    A second female of mid-Cretaceous Burmaculex antiquus Borkent & Grimaldi, preserved in 99 myo Burmese amber, and the oldest known member of the Culicidae, is described in detail. Although generally opaque and distorted, some character states are added or refined. The discovery of well-developed scales on the legs shows that this feature must now be considered a synapomorphy of both the fossil and all extant members of the family. Previously described synapomorphies and further interpretation here confirm the phylogenetic position of this fossil as the sister group to extant and all known fossil Culicidae. It is placed in the new subfamily Burmaculicinae.

  18. [Mosquitoes (Diptera, Culicidae) of Smir marshes (northwest of Morocco): inventory and biotypology].

    Science.gov (United States)

    El Joubari, M; Louah, A; Himmi, O

    2014-02-01

    The Smir marshes are a favorable environment for the growth of many mosquitoes (Diptera, Culicidae). The inventory of Culicidae species reveals 14 species, is 33% of the species of Morocco, distributed in four genera: Culex, Culiseta, Ochlerotatus and Anopheles (with 5, 2, 5 and 2 species respectively) which Anopheles labranchiae, vector of the agent of the malaria in Morocco until 2004. In this study, we investigated the spatiotemporal mesological affinities and we tried to explain the biotypology of mosquito populations of the site. These analyzes revealed several groups of stations and species according to various parameters, especially salinity.

  19. Description of the Pupa of Aedes (Ochlerotatus) Grossbecki Dyar and Knab (Diptera: Culicidae)

    Science.gov (United States)

    1991-12-01

    Diptera: Culicidae). Bull. Illinois Nat. 25:83-126. Hist. Surv. 24:1-96. Darsie , R.F., Jr . and R.A. Ward. 1981. Iden- Siverly, R.E. 1972. Mosquitoes of...Diptera: Culicidae). Mosq. Syst. 16:227- onomists’ glossary of mosquito anatomy. 270. Plexus Publ. Inc., Marlton, New Jersey. Ward, R.A. and R.F. Darsie , Jr ...Knight and Stone 1977, Knight 1978, Wood Maryland, Prince George’s County, Fort et al. 1979, Darsie and Ward 1981, Ward Washington, coll. no. BH 901, 28

  20. Invasion Biology of Aedes japonicus japonicus (Diptera: Culicidae)

    Science.gov (United States)

    Fonseca, Dina M.

    2014-01-01

    Aedes japonicus japonicus (Theobald) (Diptera: Culicidae) has recently expanded beyond its native range of Japan and Korea into large parts of North America and Central Europe. Population genetic studies begun immediately after the species was detected in North America revealed genetically distinct introductions that subsequently merged, likely contributing to the successful expansion. Interactions, particularly in the larval stage, with other known disease vectors give this invasive subspecies the potential to influence local disease dynamics. Its successful invasion likely does not involve superior direct competitive abilities, but it is associated with the use of diverse larval habitats and a cold tolerance that allows an expanded seasonal activity range in temperate climates. We predict a continued but slower expansion of Ae. j. japonicus in North America and a continued rapid expansion into other areas as this mosquito will eventually be considered a permanent resident of much of North America, Europe, Asia, and parts of Hawaii. PMID:24397520

  1. Phenotypic plasticity's impacts on diversification and speciation.

    Science.gov (United States)

    Pfennig, David W; Wund, Matthew A; Snell-Rood, Emilie C; Cruickshank, Tami; Schlichting, Carl D; Moczek, Armin P

    2010-08-01

    Phenotypic plasticity (the ability of a single genotype to produce multiple phenotypes in response to variation in the environment) is commonplace. Yet its evolutionary significance remains controversial, especially in regard to whether and how it impacts diversification and speciation. Here, we review recent theory on how plasticity promotes: (i) the origin of novel phenotypes, (ii) divergence among populations and species, (iii) the formation of new species and (iv) adaptive radiation. We also discuss the latest empirical support for each of these evolutionary pathways to diversification and identify potentially profitable areas for future research. Generally, phenotypic plasticity can play a largely underappreciated role in driving diversification and speciation.

  2. A Genome-Scale Investigation of Incongruence in Culicidae Mosquitoes.

    Science.gov (United States)

    Wang, Yuyu; Zhou, Xiaofan; Yang, Ding; Rokas, Antonis

    2015-12-01

    Comparison of individual gene trees in several recent phylogenomic studies from diverse lineages has revealed a surprising amount of topological conflict or incongruence, but we still know relatively little about its distribution across the tree of life. To further our understanding of incongruence, the factors that contribute to it and how it can be ameliorated, we examined its distribution in a clade of 20 Culicidae mosquito species through the reconstruction and analysis of the phylogenetic histories of 2,007 groups of orthologous genes. Levels of incongruence were generally low, the three exceptions being the internodes concerned with the branching of Anopheles christyi, with the branching of the subgenus Anopheles as well as the already reported incongruence within the Anopheles gambiae species complex. Two of these incongruence events (A. gambiae species complex and A. christyi) are likely due to biological factors, whereas the third (subgenus Anopheles) is likely due to analytical factors. Similar to previous studies, the use of genes or internodes with high bootstrap support or internode certainty values, both of which were positively correlated with gene alignment length, substantially reduced the observed incongruence. However, the clade support values of the internodes concerned with the branching of the subgenus Anopheles as well as within the A. gambiae species complex remained very low. Based on these results, we infer that the prevalence of incongruence in Culicidae mosquitoes is generally low, that it likely stems from both analytical and biological factors, and that it can be ameliorated through the selection of genes with strong phylogenetic signal. More generally, selection of genes with strong phylogenetic signal may be a general empirical solution for reducing incongruence and increasing the robustness of inference in phylogenomic studies.

  3. Overcoming maladaptive plasticity through plastic compensation

    Directory of Open Access Journals (Sweden)

    Matthew R.J. MORRIS, Sean M. ROGERS

    2013-08-01

    Full Text Available Most species evolve within fluctuating environments, and have developed adaptations to meet the challenges posed by environmental heterogeneity. One such adaptation is phenotypic plasticity, or the ability of a single genotype to produce multiple environmentally-induced phenotypes. Yet, not all plasticity is adaptive. Despite the renewed interest in adaptive phenotypic plasticity and its consequences for evolution, much less is known about maladaptive plasticity. However, maladaptive plasticity is likely an important driver of phenotypic similarity among populations living in different environments. This paper traces four strategies for overcoming maladaptive plasticity that result in phenotypic similarity, two of which involve genetic changes (standing genetic variation, genetic compensation and two of which do not (standing epigenetic variation, plastic compensation. Plastic compensation is defined as adaptive plasticity overcoming maladaptive plasticity. In particular, plastic compensation may increase the likelihood of genetic compensation by facilitating population persistence. We provide key terms to disentangle these aspects of phenotypic plasticity and introduce examples to reinforce the potential importance of plastic compensation for understanding evolutionary change [Current Zoology 59 (4: 526–536, 2013].

  4. Overcoming maladaptive plasticity through plastic compensation

    Institute of Scientific and Technical Information of China (English)

    Matthew R.J.MORRIS; Sean M.ROGERS

    2013-01-01

    Most species evolve within fluctuating environments,and have developed adaptations to meet the challenges posed by environmental heterogeneity.One such adaptation is phenotypic plasticity,or the ability of a single genotype to produce multiple environmentally-induced phenotypes.Yet,not all plasticity is adaptive.Despite the renewed interest in adaptive phenotypic plasticity and its consequences for evolution,much less is known about maladaptive plasticity.However,maladaptive plasticity is likely an important driver of phenotypic similarity among populations living in different environments.This paper traces four strategies for overcoming maladaptive plasticity that result in phenotypic similarity,two of which involve genetic changes (standing genetic variation,genetic compensation) and two of which do not (standing epigenetic variation,plastic compensation).Plastic compensation is defined as adaptive plasticity overcoming maladaptive plasticity.In particular,plastic compensation may increase the likelihood of genetic compensation by facilitating population persistence.We provide key terms to disentangle these aspects of phenotypic plasticity and introduce examples to reinforce the potential importance of plastic compensation for understanding evolutionary change.

  5. Recycling of Plastic

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Fruergaard, Thilde

    2011-01-01

    Plastic is produced from fossil oil. Plastic is used for many different products. Some plastic products like, for example, wrapping foil, bags and disposable containers for food and beverage have very short lifetimes and thus constitute a major fraction of most waste. Other plastic products like......, good strength and long durability. Recycling of plastic waste from production is well-established, while recycling of postconsumer plastic waste still is in its infancy. This chapter describes briefly how plastic is produced and how waste plastic is recycled in the industry. Quality requirements...

  6. [The mosquitoes (Diptera Culicidae) of Morocco. Bibliographic review (1916-2001) and inventory of the species].

    Science.gov (United States)

    Trari, B; Dakki, M; Himmi, O; el Agbani, M A

    2003-11-01

    The history of the Culicidae of Morocco was related from bibliographical data. A synthesis of the almost entire works carried out on these Insects (Diptera) since 1916 allowed to bring out the main stages of research of which they were the subject, while emphasizing the important periods of large malaria epidemics in Morocco. A short list of species is also given.

  7. Medical Entomology Studies - XV. A Revision of the Subgenus Paraedes of the Genus Aedes (Diptera: Culicidae)

    Science.gov (United States)

    1981-01-01

    Med. Res. 10: 430-75. Diptera Nematocera from the Federated Malay States museums. J. Fed. Malay States Mus. 14: l-139. Philippine nematocerous...Culicidae. p. 266-343. In M. D. Delfinado and D. E. Hardy, Ed. A catalog of the Diptera of the Oriental region. Volume I. Suborder Nematocera . Univ

  8. Description of the Immature Stages of Anopheles (Nyssorhynchus) rondoni (Neiva & Pinto) (Diptera: Culicidae)

    Science.gov (United States)

    1997-05-01

    Neiva & Pinto) (Diptera: Culicidae) Maria Anice Mureb Sallum/+, Richard C Wilkerson* Núcleo de Pesquisa Taxonômica e Sistemática em Entomologia ...Taxonômica e Sistemática em Entomologia Médica, Universidade de São Paulo, São Paulo. The following specimens were used for setal counts and measurements (the

  9. INVENTORY OF MOSQUITOES (DIPTERA: CULICIDAE) IN CONSERVATION UNITS IN BRAZILIAN TROPICAL DRY FORESTS.

    Science.gov (United States)

    Santos, Cleandson Ferreira; Silva, Alex Chavier; Rodrigues, Raquel Andrade; de Jesus, Jamilli Sanndy Ramos; Borges, Magno Augusto Zazá

    2015-01-01

    In Brazil, most studies of the Culicidae family are concentrated in rainforest regions. As such, there is a lack of knowledge regarding the diversity of Culicidae in regions with different climatic and vegetational characteristics. The aim of this study was to compile an inventory of Culicidae in protected areas of the semi-arid region of the state of Minas Gerais, Brazil, in order to better understand the diversity of the family within this region. The study was conducted across four protected areas in the northern region of the state, in tropical dry forest (TDF) fragments. Sampling methods included Shannon trap and CDC light trap, as well as active collection. A total of 11,219 mosquito specimens were collected between August 2008 and July 2012, belonging to 11 genera and 45 species; 15 new records for the state of Minas Gerais were registered, as well as 26 new records for semi-arid regions within the state. The high number of new Culicidae records in this region demonstrates the importance of inventory studies for increasing the knowledge of culicid biodiversity in Minas Gerais, and in particular within semi-arid regions of the state.

  10. INVENTORY OF MOSQUITOES (DIPTERA: CULICIDAE IN CONSERVATION UNITS IN BRAZILIAN TROPICAL DRY FORESTS

    Directory of Open Access Journals (Sweden)

    Cleandson Ferreira SANTOS

    2015-06-01

    Full Text Available In Brazil, most studies of the Culicidae family are concentrated in rainforest regions. As such, there is a lack of knowledge regarding the diversity of Culicidae in regions with different climatic and vegetational characteristics. The aim of this study was to compile an inventory of Culicidae in protected areas of the semi-arid region of the state of Minas Gerais, Brazil, in order to better understand the diversity of the family within this region. The study was conducted across four protected areas in the northern region of the state, in tropical dry forest (TDF fragments. Sampling methods included Shannon trap and CDC light trap, as well as active collection. A total of 11,219 mosquito specimens were collected between August 2008 and July 2012, belonging to 11 genera and 45 species; 15 new records for the state of Minas Gerais were registered, as well as 26 new records for semi-arid regions within the state. The high number of new Culicidae records in this region demonstrates the importance of inventory studies for increasing the knowledge of culicid biodiversity in Minas Gerais, and in particular within semi-arid regions of the state.

  11. Registros de mayor altitud para mosquitos (Diptera: Culicidae en Venezuela

    Directory of Open Access Journals (Sweden)

    Juan-Carlos Navarro

    2010-03-01

    Full Text Available Los mosquitos (Diptera: Culicidae son insectos holometábolos con estadios inmaduros acuáticos que utilizan una amplia variedad de hábitats larvales, desde cuerpos de agua en el suelo hasta Fitotelmata (depósitos de agua en las plantas y depósitos artificiales. La disponibilidad de sitios de reproducción a menudo determina el límite superior del ámbito de los mosquitos. Nosotros construimos una base de datos de 9 607 registros, 432 localidades, 19 géneros y 254 especies. La coordillera Andina posee el 77% de los registros con mayor altitud incluyendo Aedes euris con un registro a 3 300 m, seguido por tres especies de Anopheles -subgénero Kerteszia- con una altitud máxima de 2 680 m. Wyeomyia bicornis y Culex daumastocampa a 2 550 m fueron los registros de mayor altitud en la cordillera Costera- Central, mientras que el record más alto en Pantepui fue Wyeomyia zinzala a 2 252 m. El 60% de los registros de máxima altitud están representados por especies asociadas con fitotelmata (Bromeliaceae y Sarraceniaceae. Los límites superiores de Culex quinquefasciatus y Anopheles (Kerteszia podría representar el límite teórico para la transmisión de filariasis o arbovirus, por Culex y malaria por Anopheles (Kerteszia en Venezuela. Del mismo modo, un vector del dengue, Aedes aegypti, no ha sido registrado por encima de 2 000 m.Highest mosquito records (Diptera: Culicidae in Venezuela. Mosquitoes (Diptera: Culicidae are holometabolous insects with aquatic immature stages, which use a broad variety of larval habitats, from ground water bodies to Phytothelmata (water deposits in plants and artificial deposits. The availability of breeding sites often determines the upper limits of mosquito ranges. We built a database with 9 607 records with 432 localities, 19 genera and 254 species. The Andean mountains have 77% of the highest mosquito records including Aedes euris with record at 3 133 m, followed by three species of Anopheles -subgenera

  12. Recycling of Plastic

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Fruergaard, Thilde

    2011-01-01

    Plastic is produced from fossil oil. Plastic is used for many different products. Some plastic products like, for example, wrapping foil, bags and disposable containers for food and beverage have very short lifetimes and thus constitute a major fraction of most waste. Other plastic products like......, for example, gutters, window frames, car parts and transportation boxes have long lifetimes and thus appear as waste only many years after they have been introduced on the market. Plastic is constantly being used for new products because of its attractive material properties: relatively cheap, easy to form......, good strength and long durability. Recycling of plastic waste from production is well-established, while recycling of postconsumer plastic waste still is in its infancy. This chapter describes briefly how plastic is produced and how waste plastic is recycled in the industry. Quality requirements...

  13. Mosquitos Culicidae como vetores emergentes de infecções Culicidae mosquitoes as emerging vectors of diseases

    Directory of Open Access Journals (Sweden)

    Oswaldo Paulo Forattini

    1998-12-01

    Full Text Available Apresenta-se sucinta revisão do relacionamento entre as chamadas infecções emergentes e o conceito de vetores emergentes. Estes são entendidos não apenas no que concerne aos que são descritos como tais, de forma nova, mas também aqueles com acentuadas mudanças de comportamento. Os fatores específicos que propiciam esse fenômeno identificam-se à poderosa influência humana sobre o ambiente. Assim, aquele construído pelo homem e conhecido como antrópico representa a função de pressão seletiva que induz as populações vetoras a se adaptarem às novas circunstâncias. Nelas inclui-se fatores ecológicos ambientais, ou demográficos, que incrementam o contato com os novos comportamentos vetoriais. Relata-se o encontro de criadouros anômalos de mosquitos Culicidae nas Américas. A interpretação desses encontros é feita visando à vigilância epidemiológica. O significado dessa emergência ou reemergência pode se traduzir no aparecimento de problemas epidemiológicos. Sugere-se que, em sendo assim, a vigilância epidemiológica deva ser feita em grau global.A review is presented of the relationships between the so-called emerging infectious diseases and what may be defined as emerging vectors. These include not only those that have recently appeared but also those that present remarkable behavioral changes. Specific factors leading to that emergence can be associated with the powerful human influence on the environment. So the man-made, i.e. anthropic environment, exercises a selective pressure inducing vector populations to adapt to new circumstances. These may arise from ecological, environmental, or demographic factors that increase contact with the new vector. With this in mind, data on anomalous Culicidae breeding places in the Americas are reported. An interpretation of these findings is offered in the light of epidemiological surveillance. The question is whether vector emergence or re-emergence may constitute an

  14. Identification of Belgian mosquito species (Diptera: Culicidae) by DNA barcoding.

    Science.gov (United States)

    Versteirt, V; Nagy, Z T; Roelants, P; Denis, L; Breman, F C; Damiens, D; Dekoninck, W; Backeljau, T; Coosemans, M; Van Bortel, W

    2015-03-01

    Since its introduction in 2003, DNA barcoding has proven to be a promising method for the identification of many taxa, including mosquitoes (Diptera: Culicidae). Many mosquito species are potential vectors of pathogens, and correct identification in all life stages is essential for effective mosquito monitoring and control. To use DNA barcoding for species identification, a reliable and comprehensive reference database of verified DNA sequences is required. Hence, DNA sequence diversity of mosquitoes in Belgium was assessed using a 658 bp fragment of the mitochondrial cytochrome oxidase I (COI) gene, and a reference data set was established. Most species appeared as well-supported clusters. Intraspecific Kimura 2-parameter (K2P) distances averaged 0.7%, and the maximum observed K2P distance was 6.2% for Aedes koreicus. A small overlap between intra- and interspecific K2P distances for congeneric sequences was observed. Overall, the identification success using best match and the best close match criteria were high, that is above 98%. No clear genetic division was found between the closely related species Aedes annulipes and Aedes cantans, which can be confused using morphological identification only. The members of the Anopheles maculipennis complex, that is Anopheles maculipennis s.s. and An. messeae, were weakly supported as monophyletic taxa. This study showed that DNA barcoding offers a reliable framework for mosquito species identification in Belgium except for some closely related species. © 2014 John Wiley & Sons Ltd.

  15. 77 FR 54930 - Carlyle Plastics and Resins, Formerly Known as Fortis Plastics, A Subsidiary of Plastics...

    Science.gov (United States)

    2012-09-06

    ... Employment and Training Administration Carlyle Plastics and Resins, Formerly Known as Fortis Plastics, A... plastic parts. New information shows that Fortis Plastics is now called Carlyle Plastics and Resins. In... of Carlyle Plastics and Resins, formerly known as Fortis Plastics, a subsidiary of...

  16. Richard III

    DEFF Research Database (Denmark)

    Lauridsen, Palle Schantz

    2017-01-01

    Kort analyse af Shakespeares Richard III med fokus på, hvordan denne skurk fremstilles, så tilskuere (og læsere) langt henad vejen kan føle sympati med ham. Med paralleller til Netflix-serien "House of Cards"......Kort analyse af Shakespeares Richard III med fokus på, hvordan denne skurk fremstilles, så tilskuere (og læsere) langt henad vejen kan føle sympati med ham. Med paralleller til Netflix-serien "House of Cards"...

  17. Our plastic age

    National Research Council Canada - National Science Library

    Richard C. Thompson; Shanna H. Swan; Charles J. Moore; Frederick S. vom Saal

    2009-01-01

    Within the last few decades, plastics have revolutionized our daily lives. Globally we use in excess of 260 million tonnes of plastic per annum, accounting for approximately 8 per cent of world oil production...

  18. Weinig plastic in vissenmaag

    NARCIS (Netherlands)

    Foekema, E.M.

    2012-01-01

    Waar de magen van sommige zeevogels vol plastic zitten, lijken vissen in de Noordzee nauwelijks last te hebben van kunststofafval. Onderzoekers die plastic resten zochten in vissenmagen vonden ze in elk geval nauwelijks.

  19. Ear Plastic Surgery

    Science.gov (United States)

    ... ENTCareers Marketplace Find an ENT Doctor Near You Ear Plastic Surgery Ear Plastic Surgery Patient Health Information ... they may improve appearance and self-confidence. Can Ear Deformities Be Corrected? Formation of the ear during ...

  20. Biodegradability of Plastics

    OpenAIRE

    Yutaka Tokiwa; Calabia, Buenaventurada P.; Charles U. Ugwu; Seiichi Aiba

    2009-01-01

    Plastic is a broad name given to different polymers with high molecular weight, which can be degraded by various processes. However, considering their abundance in the environment and their specificity in attacking plastics, biodegradation of plastics by microorganisms and enzymes seems to be the most effective process. When plastics are used as substrates for microorganisms, evaluation of their biodegradability should not only be based on their chemical structure, but also on their physical ...

  1. Chemical Recycle of Plastics

    Directory of Open Access Journals (Sweden)

    Sara Fatima

    2014-11-01

    Full Text Available Various chemical processes currently prevalent in the chemical industry for plastics recycling have been discussed. Possible future scenarios in chemical recycling have also been discussed. Also analyzed are the effects on the environment, the risks, costs and benefits of PVC recycling. Also listed are the various types of plastics and which plastics are safe to use and which not after rcycle

  2. Plastic value chains

    DEFF Research Database (Denmark)

    Baxter, John; Wahlstrom, Margareta; Zu Castell-Rüdenhausen, Malin

    2014-01-01

    Optimizing plastic value chains is regarded as an important measure in order to increase recycling of plastics in an efficient way. This can also lead to improved awareness of the hazardous substances contained in plastic waste, and how to avoid that these substances are recycled. As an example...

  3. Filamentous fungi associated with mosquito larvae (Diptera: Culicidae) in municipalities of the Brazilian Amazon

    OpenAIRE

    Pereira, Eleny da S; Sarquis, Maria I de M; Ferreira-Keppler, Ruth Leila; Neusa Hamada; Alencar, Yamile B

    2009-01-01

    Algumas espécies da família Culicidae são importantes vetores de doenças em humanos e em outros animais. Estágios imaturos são filtradores não seletivos de partículas orgânicas e microrganismos. Estudos da diversidade microbiológica podem contribuir para a descoberta de novas substâncias que podem ser usadas em indústrias farmacêuticas, para alimentação ou para controle biológico. O objetivo deste estudo foi isolar e identificar os fungos associados a larvas de Culicidae encontradas em difere...

  4. The Brazilian Malaria Vector Anopheles (Kerteszia) Cruzii: Life Stages and Biology (Diptera: Culicidae)

    Science.gov (United States)

    1991-11-01

    Mosquitos no litoral paranaense. I - Idade fisioldgica de no Parque National da Serra dos Orgaos, Anopheles cruzii (Diptera, Culicidae). Arq. Estado do...no Parque National da Peryassii, A.G. 1908. OS culicideos do Brazil. Serra dos Grgaos, Estado do Rio de Janeiro, Inst. de Manguinhos, Rio de Janeiro...Kerteszia no litoral Guimar%es, A.E. and V.N.M. Victoria. 1986. do estado de Santa Catarina. Rev. Bras. Mosquitos no Parque National da Serra dos

  5. Argyritarsis Section of the Subgenus Nyssorhynchus of Anopheles (Diptera: Culicidae). Revision

    Science.gov (United States)

    1988-01-01

    Am. Entomol. Inst. (Ann Arbor) 1(2):1-17. 1967. Estudios sobre mosquitos (Diptera, Culicidae). Ia. Un proyecto para un estudio sistematico de los...subgenero Nyssorhynchus do Brasil. Arq. Hig. Saude Publica 8:141-162. 1950. Do diagnostico diferencial entre A (N) strodel e A (N) pessoai na fase larvaria...Mex. , D. F. , Secr. Salubr. Asist. 181 p. Vargas V. M. 1956. Clave numerica para identificacion de larvas en cuarta fase de Anophelini en Costa Rica

  6. A Revision of the Argyritarsis Section of the Subgenus Nyssorhynchus of Anopheles (Diptera: Culicidae)

    Science.gov (United States)

    1988-01-01

    Middle America. Contrib. Am. Entomol. Inst. (Ann Arbor) 1(2):1-17. 1967. Estudios sobre mosquitos (Diptera, Culicidae). Ia. Un proyecto para un estudio...N) pessoai na fase larvaria. Rev. Bras. Malariol. 2:38-48. Galvao, A. L. A. and F. A. D. Amaral 1938. Sobre urn novo anofelino de Campos do Jordao...Salubr. Taxonomia y distribution. Mex., D. F., P* identification de larvas en cuarta fase de Rev. Biol. Trop. 4:27-34. identification de larvas

  7. MOSQUITO (DIPTERA: CULICIDAE) AS A BIOINDICATOR OF ENVIRONMENTAL HEALTH AND DISEASE OUTBREAK

    OpenAIRE

    Sugeng Juwono Mardihusodo

    2006-01-01

    Quality of public health is greatly influenced by a lot of environmental factors, especially biotic factors among wich is a group of hematophagus mosquitoes (Diptera: Culicidae) showing high competence as disease vector(s). The vector mosquitoes belong to different species of different genera: *Anopheles, Aedes, Culex*, and *Mansonia.*In hypersensitive individuals, mosquito bites may induce pain and itching on the skin where the mosquito suck blood, allergic dermat...

  8. Second Supplement to "A Catalog of the Mosquitoes of the World" (Diptera: Culicidae)

    Science.gov (United States)

    1984-01-01

    female)‘, P ( pupa ), L (larva) and E (egg). An asterisk (*) to the right of the symbols indicates an accompanying illustration. Type-depositories are...Acta Parasitol. Sinica 2:397-403. Chen Han-Bin. 1980. Study on the Culex vishnui subgroup in China with discussions on the taxonomic status of C...Danilov, V.N. 1982. Mosquito fauna (Diptera, Culicidae) of the Ethiopian zoogeographical region 2. A new species of Mansonia (CoquiZtettidia) and a key

  9. Mosquito community composition in dynamic landscapes from the Atlantic Forest biome (Diptera, Culicidae

    Directory of Open Access Journals (Sweden)

    Mário Luís Pessôa Guedes

    2014-03-01

    Full Text Available Mosquito community composition in dynamic landscapes from the Atlantic Forest biome (Diptera, Culicidae. Considering that some species of Culicidae are vectors of pathogens, both the knowledge of the diversity of the mosquito fauna and how some environment factors influence in it, are important subjects. In order to address the composition of Culicidae species in a forest reserve in southern Atlantic Forest, we compared biotic and abiotic environmental determinants and how they were associated with the occurrence of species between sunset and sunrise. The level of conservation of the area was also considered. The investigation was carried out at Reserva Natural do Morro da Mina, in Antonina, state of Paraná, Brazil. We performed sixteen mosquito collections employing Shannon traps at three-hour intervals, from July 2008 to June 2009. The characterization of the area was determined using ecological indices of diversity, evenness, dominance and similarity. We compared the frequency of specimens with abiotic variables, i.e., temperature, relative humidity and pluviosity. Seven thousand four hundred ten mosquito females were captured. They belong to 48 species of 12 genera. The most abundant genera were Anopheles, Culex, Coquillettidia, Aedes and Runchomyia. Among the species, the most abundant was Anopheles cruzii, the primary vector of Plasmodium spp. in the Atlantic Forest. Results of the analyses showed that the abiotic variables we tested did not influence the occurrence of species, although certain values suggested that there was an optimum range for the occurrence of culicid species. It was possible to detect the presence of species of Culicidae with different epidemiologic profiles and habitat preference.

  10. Sampling Outdoor, Resting Anopheles gambiae and Other Mosquitoes (Diptera: Culicidae) in Western Kenya with Clay Pots

    OpenAIRE

    Odiere, M.; Bayoh, M. N.; Gimnig, J; Vulule, J; Irungu, L.; Walker, E.

    2007-01-01

    Clay pots were analyzed as devices for sampling the outdoor resting fraction of Anopheles gambiae Giles (Diptera: Culicidae) and other mosquito species in a rural, western Kenya. Clay pots (Anopheles gambiae resting pots, herein AgREPOTs), outdoor pit shelters, indoor pyrethrum spray collections (PSC), and Colombian curtain exit traps were compared in collections done biweekly for nine intervals from April to June 2005 in 20 housing compounds. Of 10,517 mosquitoes sampled, 4,668 An. gambiae s...

  11. Pictorial Keys for the Identification of Mosquitoes (Diptera: Culicidae) Associated With Dengue Virus Transmission

    Science.gov (United States)

    2004-08-03

    mediovittatus. American Journal of Tropical Medicine and Hygiene, 39, 218–222. Gubler, D.J. (1997) Dengue and dengue hemorrhagic fever: its history and...Culicidae). Insecta Koreana, 19(1), 1–130. © 2004 Magnolia Press 9KEY TO MOSQUITOES 589...virus in Yap State, Federated States of Micronesia, and implication of Aedes hensilli as an epidemic vector. American Journal of Tropical Medicine

  12. Biodegradability of plastics.

    Science.gov (United States)

    Tokiwa, Yutaka; Calabia, Buenaventurada P; Ugwu, Charles U; Aiba, Seiichi

    2009-08-26

    Plastic is a broad name given to different polymers with high molecular weight, which can be degraded by various processes. However, considering their abundance in the environment and their specificity in attacking plastics, biodegradation of plastics by microorganisms and enzymes seems to be the most effective process. When plastics are used as substrates for microorganisms, evaluation of their biodegradability should not only be based on their chemical structure, but also on their physical properties (melting point, glass transition temperature, crystallinity, storage modulus etc.). In this review, microbial and enzymatic biodegradation of plastics and some factors that affect their biodegradability are discussed.

  13. Plastic value chains

    DEFF Research Database (Denmark)

    Baxter, John; Wahlstrom, Margareta; Zu Castell-Rüdenhausen, Malin

    2014-01-01

    Optimizing plastic value chains is regarded as an important measure in order to increase recycling of plastics in an efficient way. This can also lead to improved awareness of the hazardous substances contained in plastic waste, and how to avoid that these substances are recycled. As an example......, plastics from WEEE is chosen as a Nordic case study. The project aims to propose a number of improvements for this value chain together with representatives from Nordic stakeholders. Based on the experiences made, a guide for other plastic value chains shall be developed....

  14. Biodegradability of Plastics

    Directory of Open Access Journals (Sweden)

    Yutaka Tokiwa

    2009-08-01

    Full Text Available Plastic is a broad name given to different polymers with high molecular weight, which can be degraded by various processes. However, considering their abundance in the environment and their specificity in attacking plastics, biodegradation of plastics by microorganisms and enzymes seems to be the most effective process. When plastics are used as substrates for microorganisms, evaluation of their biodegradability should not only be based on their chemical structure, but also on their physical properties (melting point, glass transition temperature, crystallinity, storage modulus etc.. In this review, microbial and enzymatic biodegradation of plastics and some factors that affect their biodegradability are discussed.

  15. Journal of CHINA PLASTICS

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Journal of CHINA PLASTICS was authorized and approved by The State Committee of Science and Technology of China and The Bureau of News Press of China, and published by The China Plastics Processing Industry Association,Beijing Technology and Business University and The Institute of Plastics Processing and Application of Light Industry, distributed worldwide. Since its birth in 1987, CHINA PLASTICS has become a leading magazine in plastics industry in China, a national Chinese core journal and journal of Chinese scientific and technological article statistics. It is covered by CA.

  16. Mosquitoes (Diptera, Culicidae inhabiting foliar tanks of Guzmania brasiliensis Ule (Bromeliaceae in central Amazonia, Brazil

    Directory of Open Access Journals (Sweden)

    Sharlene Roberta da Silva Torreias

    2010-01-01

    Full Text Available Mosquitoes in the family Culicidae develop their immature forms in different environments depending on various circumstances. This study represents the first contribution to the ecological knowledge of culicids living in the bromeliad G. brasiliensis. The objectives of the study were to compare the Culicidae fauna of bromeliads in two seasonal periods, analyzing their abundance, richness and the influence of pH, conductivity and water volume, on the populations. Sampling was done at Reserva Adolpho Ducke, Manaus, Amazonas, Brazil between 2003 and 2005. Six samplings were done in the rainy season and six in the dry season. On each sampling day, six terrestrial and six epiphytic bromeliads, totaling 144 sampling units, were retrieved. A total of 444 immature mosquitoes were collected, distributed in the following species: Culex (Microculex stonei Lane & Whitman, Culex (Microculex chryselatus Dyar & Knab, Culex (Microculex sp., Wyeomyia (Hystatomyia autocratica Dyar & Knab and Wyeomyia (Hystatomyia splendida Bonne-Wepster & Bonne. The relationship between abundance of Culicidae and sampling period was not significant, although abundance was higher in the dry period. There were significant correlations between water volume and the abundance (p = 0.003 and richness (p = 0.001 of culicids. The pH was positively related to the occurrence of the species Wy. autocratica (p= 0.010 and Wy. splendida (p= 0.006, demonstrating the influence of this factor in the structuring of bromeliad-inhabiting communities.

  17. Challenges in plastics recycling

    DEFF Research Database (Denmark)

    Pivnenko, Kostyantyn; Jakobsen, L. G.; Eriksen, Marie Kampmann

    2015-01-01

    Recycling of waste plastics still remains a challenging area in the waste management sector. The current and potential goals proposed on EU or regional levels are difficult to achieve, and even to partially fullfil them the improvements in collection and sorting should be considerable. A study...... was undertaken to investigate the factors affecting quality in plastics recycling. The preliminary results showed factors primarily influencing quality of plastics recycling to be polymer cross contamination, presence of additives, non-polymer impurities, and polymer degradation. Deprivation of plastics quality......, with respect to recycling, has been shown to happen throughout the plastics value chain, but steps where improvements may happen have been preliminary identified. Example of Cr in plastic samples analysed showed potential spreading and accumulation of chemicals ending up in the waste plastics. In order...

  18. Glassy metallic plastics

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    This paper reports a class of bulk metallic glass including Ce-, LaCe-, CaLi-, Yb-, and Sr-based metallic glasses, which are regarded as glassy metallic plastics because they combine some unique properties of both plastics and metallic alloys. These glassy metallic plastics have very low glass transition temperature (Tg~25oC to 150oC) and low Young’s modulus (~20 GPa to 35 GPa). Similar to glassy plastics, these metallic plastics show excellent plastic-like deformability on macro-, micro- and even nano-scale in their supercooled liquid range and can be processed, such as elongated, compressed, bent, and imprinted at low temperatures, in hot water for instance. Under ambient conditions, they display such metallic properties as high thermal and electric conductivities and excellent mechanical properties and other unique properties. The metallic plastics have potential applications and are also a model system for studying issues in glass physics.

  19. Survey of the mosquitoes (Diptera: Culicidae) of Mayotte.

    Science.gov (United States)

    Le Goff, Gilbert; Goodman, Steven M; Elguero, Eric; Robert, Vincent

    2014-01-01

    A transversal survey of immature mosquitoes was conducted on Mayotte Island (France) in the Comoros Archipelago, western Indian Ocean, with the aim to inventory the Culicidae and to document inter-species relationships in different habitats. In total 420 habitats were sampled for larvae and/or pupae mosquitoes, resulting in more than 6,000 specimens. Forty species belonging to 15 genera were collected, with eight taxa integrated for the first time to the Mayotte mosquito list. The most frequently recorded species were Stegomyia aegypti, St. albopicta, Anopheles gambiae and Eretmapodites subsimplicipes, the first three species being known vectors of viruses and parasites transmitted to humans. Mean species richness in habitats ranged from 1.00 to 3.29, with notable differences between habitats. For example, water-filled axils of banana leaves, tree-holes and crab-holes had low species richness, while cut bamboo, water pools, abandoned tires and marsh and swamp water had notably higher species richness. Twenty-seven mosquito species belonging to 12 genera were routinely collected (in ≥20% of at least one type of larval habitat) suggesting that multiple species play a role in the biocenosis of these aquatic habitats. Multispecies association was observed in 52% of the habitats. The co-occurrence of up to six species belonging to five genera was recorded in a single habitat. The mosquitoes of Mayotte show notable biogeographical affinities to those of Madagascar, as compared to the African continent. These two potential source areas are nearly equidistant from Mayotte, which in turn indicates biased dispersal from east to west. Our findings suggest that with relatively short-term intensive sampling in different habitats, it is possible to approach exhaustive species inventories based on collection of larvae. Mayotte, with its modest elevation range and land surface, has a notable species richness of mosquitoes with 45 well-documented species belonging to 15 genera.

  20. Mosquitoes (Diptera: Culicidae) From the Northwestern Brazilian Amazon: Padauari River.

    Science.gov (United States)

    Hutchings, R S G; Hutchings, R W; Menezes, I S; Motta, M de A; Sallum, M A M

    2016-11-01

    The mosquito fauna (Culicidae) from remote northern areas of the State of Amazonas were sampled using Centers for Disease Control and Prevention, Shannon, Malaise, and Suspended traps, together with net sweeping and immature collections. One hundred and seven collections were performed in five localities along the Padauari River, State of Amazonas, Brazil, during June 2010. The 20,557 mosquitoes collected are distributed in 17 genera, representing 117 different species, of which four are new distributional records for the State of Amazonas. Furthermore, there are 10 morphospecies that may represent undescribed new taxa, eight of which are also new records for the State of Amazonas. The genus Culex had the highest number of species and the largest number of individuals. Aedes and Psorophora both represented 10% of the total sample and had the second highest number of species and individuals. The most abundant species was Culex (Melanoconion) gnomatos Sallum, Hutchings & Ferreira, followed by Aedes (Ochlerotatus) fulvus (Wiedemann), Culex (Melanoconion) vaxus Dyar, Culex (Melanoconion) portesi Senevet & Abonnenc, Psorophora (Janthinosoma) amazonica Cerqueira, Culex (Culex) mollis Dyar & Knab, Psorophora (Janthinosoma) albigenu (Peryassú), and Culex (Melanoconion) theobaldi Lutz. The epidemiological and ecological implications of mosquito species found are discussed and are compared with other mosquito inventories from the Amazon region. The results represent the most diverse standardized inventory of mosquitoes along the Padauari River, with the identification of 127 species-level taxa distributed in five localities, within two municipalities (Barcelos and Santa Isabel do Rio Negro). © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  1. Nationwide inventory of mosquito biodiversity (Diptera: Culicidae) in Belgium, Europe.

    Science.gov (United States)

    Versteirt, V; Boyer, S; Damiens, D; De Clercq, E M; Dekoninck, W; Ducheyne, E; Grootaert, P; Garros, C; Hance, T; Hendrickx, G; Coosemans, M; Van Bortel, W

    2013-04-01

    To advance our restricted knowledge on mosquito biodiversity and distribution in Belgium, a national inventory started in 2007 (MODIRISK) based on a random selection of 936 collection points in three main environmental types: urban, rural and natural areas. Additionally, 64 sites were selected because of the risk of importing a vector or pathogen in these sites. Each site was sampled once between May and October 2007 and once in 2008 using Mosquito Magnet Liberty Plus traps. Diversity in pre-defined habitat types was calculated using three indices. The association between species and environmental types was assessed using a correspondence analysis. Twenty-three mosquito species belonging to traditionally recognized genera were found, including 21 indigenous and two exotic species. Highest species diversity (Simpson 0.765) and species richness (20 species) was observed in natural areas, although urban sites scored also well (Simpson 0.476, 16 species). Four clusters could be distinguished based on the correspondence analysis. The first one is related to human modified landscapes (such as urban, rural and industrial sites). A second is composed of species not associated with a specific habitat type, including the now widely distributed Anopheles plumbeus. A third group includes species commonly found in restored natural or bird migration areas, and a fourth cluster is composed of forest species. Outcomes of this study demonstrate the effectiveness of the designed sampling scheme and support the choice of the trap type. Obtained results of this first country-wide inventory of the Culicidae in Belgium may serve as a basis for risk assessment of emerging mosquito-borne diseases.

  2. Coetzeemyia, a new subgenus of Aedes, and a Redescription of the Holotype Female of Aedes (Coetzeemyia) fryeri (Theobald) (Diptera: Culicidae)

    Science.gov (United States)

    2010-10-06

    Proceedings of the Entomological Society of Washington , 97, 1–16. Edwards, F.W. (1917) Notes on Culicidae, with descriptions of new species...Africa. Proceedings of the Royal Entomological Society of London (B), 32, 165–170. McIntosh, B.M., Weinbren, M.P., Worth, C.B. & Kokernot, R.H. (1962...the Entomological Society of Washington , 46, 205–225. Theobald, F.V. (1912) No. V.– Diptera, Culicidae. Transactions Linnean Society of London (2), 15

  3. The impact of industrial anthropization on mosquito (Diptera, Culicidae) communities in mangrove areas of Guanabara Bay (Rio de Janeiro, Brazil).

    Science.gov (United States)

    de Souza, A S; Couri, M S; Florindo, L

    2012-02-01

    The effects of industrial anthropization on species composition and community diversity of Culicidae (Diptera) were studied in a mangrove area impacted by industrial activities as compared to a preserved area, both around Guanabara Bay in the state of Rio de Janeiro, Brazil. Diversity, equitability, and species richness in Culicidae community differed between the studied areas. Indicator species analysis and correspondence analysis were carried out and indicated that the Sabethini, especially Wyeomyia (Phoniomyia) theobaldi Lane, Wyeomyia (Phoniomyia) fuscipes (Edwards), and a non-identified species of Wyeomyia sp. were associated to the preserved area, whereas Aedes taeniorhynchus Wiedemann and Aedes scapularis (Rondani) to the impacted area.

  4. Plastic Pollution from Ships

    OpenAIRE

    Čulin, Jelena; Bielić, Toni

    2016-01-01

    The environmental impact of shipping on marine environment includes discharge of garbage. Plastic litter is of particular concern due to abundance, resistance to degradation and detrimental effect on marine biota. According to recently published studies, a further research is required to assess human health risk. Monitoring data indicate that despite banning plastic disposal at sea, shipping is still a source of plastic pollution. Some of the measures to combat the problem are discussed.

  5. Handbook of Plastic Welding

    DEFF Research Database (Denmark)

    Islam, Aminul

    The purpose of this document is to summarize the information about the laser welding of plastic. Laser welding is a matured process nevertheless laser welding of micro dimensional plastic parts is still a big challenge. This report collects the latest information about the laser welding of plasti...... as a knowledge handbook for laser welding of plastic components. This document should provide the information for all aspects of plastic laser welding and help the design engineers to take all critical issues into consideration from the very beginning of the design phase....

  6. Plastics and health risks.

    Science.gov (United States)

    Halden, Rolf U

    2010-01-01

    By 2010, the worldwide annual production of plastics will surpass 300 million tons. Plastics are indispensable materials in modern society, and many products manufactured from plastics are a boon to public health (e.g., disposable syringes, intravenous bags). However, plastics also pose health risks. Of principal concern are endocrine-disrupting properties, as triggered for example by bisphenol A and di-(2-ethylhexyl) phthalate (DEHP). Opinions on the safety of plastics vary widely, and despite more than five decades of research, scientific consensus on product safety is still elusive. This literature review summarizes information from more than 120 peer-reviewed publications on health effects of plastics and plasticizers in lab animals and humans. It examines problematic exposures of susceptible populations and also briefly summarizes adverse environmental impacts from plastic pollution. Ongoing efforts to steer human society toward resource conservation and sustainable consumption are discussed, including the concept of the 5 Rs--i.e., reduce, reuse, recycle, rethink, restrain--for minimizing pre- and postnatal exposures to potentially harmful components of plastics.

  7. Synaptic Plasticity and Nociception

    Institute of Scientific and Technical Information of China (English)

    ChenJianguo

    2004-01-01

    Synaptic plasticity is one of the fields that progresses rapidly and has a lot of success in neuroscience. The two major types of synaptie plasticity: long-term potentiation ( LTP and long-term depression (LTD are thought to be the cellular mochanisms of learning and memory. Recently, accumulating evidence suggests that, besides serving as a cellular model for learning and memory, the synaptic plasticity involves in other physiological or pathophysiological processes, such as the perception of pain and the regulation of cardiovascular system. This minireview will focus on the relationship between synaptic plasticity and nociception.

  8. Culicidae and Ceratopogonidae (Diptera: Nematocera inhabiting phytotelmata in Iguazú National Park, Misiones Province, subtropical Argentina Culicidae y Ceratopogonidae (Diptera: Nematocera que habitan en fi totelmata en el Parque Nacional Iguazú, provincia de Misiones, Argentina subtropical

    Directory of Open Access Journals (Sweden)

    Raúl E. Campos

    2011-06-01

    Full Text Available A list of the most common phytotelmata and their Culicidae and Ceratopogonidae inhabitants from Iguazú National Park, Misiones Province, Argentina, is presented, and biological and behavioral observations are also included. Species of Poaceae, Bromeliaceae, Apiaceae, Araceae, Urticaceae, Marantaceae, and Arecaceae, were identified as phytotelmata. Twenty six species of Culicidae and nine of Ceratopogonidae were identified. The highest species richness of culicids and ceratopogonids was recorded from the bamboo Guadua chacoensis (Poaceae and treeholes, respectively. Fourteen species of Culicidae and three of Ceratopogonidae inhabit bamboo, two and five treeholes, seven and three bromeliads, and nine and one, other less known phytotelmata, respectively.Se presenta una lista de las fitotelmata más comunes y los Culicidae y Ceratopogonidae que las habitan, del Parque Nacional Iguazú, Misiones, Argentina; además de observaciones biológicas y de comportamiento. Especies de Poaceae, Bromeliaceae, Apiaceae, Araceae, Urticaceae, Marantaceae, y Arecaceae, fueron identificadas como fitotelmata. Fueron reconocidas 26 especies de culícidos y nueve de Ceratopogonidae. La mayor riqueza de especies de culícidos y ceratopogónidos se registraron en el bambú Guadua chacoensis (Poaceae y en los huecos de los árboles respectivamente. Catorce especies de culícidos y tres de ceratopogónidos habitan bambúes, dos y cinco en los huecos de los árboles, siete y tres en bromelias y nueve y una en otras fitotelmata, respectivamente.

  9. Tomo III

    OpenAIRE

    2015-01-01

    Memorias, histórico, físicas, crítico, apologéticas de la América Meridional con unas breves advertencias y noticias útiles, a los que de orden de Su Majestad, hubiesen de viajar y describir aquellas vastas regiones. Reino Animal. Tomo III. Por un anónimo americano en Cádiz por los años de 1757. Primera Parte Prólogo Artículo 1°De los cuadrúpedos útiles al hombre a varios usos y a su sustento. Vaca Caballos Carneros de la tierra, especie de camellos Vicuña Guanacos Puercos monteses Artículo 2...

  10. Halos of Plastic

    Institute of Scientific and Technical Information of China (English)

    Maya Reid

    2012-01-01

    The halos that span South Africa's coastline are anything but angelic. Fanning out around four major urban centers-Cape Town, Port Elizabeth, East London and Durban-they are made up of innumerable bits and pieces of plastic. As a form of pollution, their shelflife is unfathomable. Plastic is essentially chemically inactive. It's designed to never break down.

  11. Biodegradation of plastics.

    Science.gov (United States)

    Shimao, M

    2001-06-01

    Widespread studies on the biodegradation of plastics have been carried out in order to overcome the environmental problems associated with synthetic plastic waste. Recent work has included studies of the distribution of synthetic polymer-degrading microorganisms in the environment, the isolation of new microorganisms for biodegradation, the discovery of new degradation enzymes, and the cloning of genes for synthetic polymer-degrading enzymes.

  12. Attractiveness of MM-X traps baited with human or synthetic odor to mosquitoes (Diptera: Culicidae) in The Gambia

    NARCIS (Netherlands)

    Qiu, Y.T.; Smallegange, R.C.; Braak, ter C.J.F.; Spitzen, J.; Loon, van J.J.A.; Jawara, M.; Milligan, P.; Galimard, A.M.S.; Beek, van T.A.; Knols, B.G.J.; Takken, W.

    2007-01-01

    Chemical cues play an important role in the host-seeking behavior of blood-feeding mosquitoes (Diptera: Culicidae). A field study was carried out in The Gambia to investigate the effects of human odor or synthetic odor blends on the attraction of mosquitoes. MM-X traps baited with 16 odor blends to

  13. Oviposition responses of Anopheles gambiae s.s. (Diptera: Culicidae) and identification of volatiles from bacteria-containing solutions

    NARCIS (Netherlands)

    Lindh, J.M.; Kännaste, A.; Knols, B.G.J.; Faye, I.; Borg-Karlson, A.K.

    2008-01-01

    In this study, a dual-choice oviposition bioassay was used to screen responses of gravid An. gambiae toward 17 bacterial species, previously isolated from Anopheles gambiae s.l. (Diptera: Culicidae) midguts or oviposition sites. The 10 isolates from oviposition sites have been identified by

  14. A comparative analysis of resistance testing methods in Aedes albopictus (Diptera: Culicidae) from St. Johns County, Florida

    Science.gov (United States)

    Aedes albopictus Skuse (Diptera: Culicidae) was tested for resistance to permethrin, bifenthrin, and malathion using Centers for Disease Control and Prevention (CDC) bottle bioassays and topical toxicology assays on adults and larval bioassays. Eggs were collected from 3 locations across St. Johns C...

  15. Nota sobre culicídeos (Diptera: Culicidae da bacia do rio Purus, Acre, Amazônia (Brasil

    Directory of Open Access Journals (Sweden)

    Delsio Natal

    1992-04-01

    Full Text Available Foram feitas coletas de mosquito (Diptera: Culicidae na área do projeto de Colonização Pedro Peixoto, no Estado do Acre, Brasil. Obteve-se um total de 4.588 exemplares pertencentes a 53 espécies ou grupos. Salienta-se a ocorrência de Anopheles (Nyssorhynchus oswaldoi.

  16. DESIGNERS’ KNOWLEDGE IN PLASTICS

    DEFF Research Database (Denmark)

    Eriksen, Kaare

    2013-01-01

    The Industrial designers’ knowledge in plastics materials and manufacturing principles of polymer products is very important for the innovative strength of the industry, according to a group of Danish plastics manufacturers, design students and practicing industrial designers. These three groups...... answered the first Danish national survey, PD13[1], investigating the importance of industrial designers’ knowledge in plastics and the collaboration between designers and the polymer industry. The plastics industry and the industrial designers collaborate well, but both groups frequently experience...... that the designers’ lack of knowledge concerning polymer materials and manufacturing methods can be problematic or annoying, and design students from most Danish design universities express the need for more contact with the industry and more competencies and tools to handle even simple topics when designing plastic...

  17. Consciousness and neural plasticity

    DEFF Research Database (Denmark)

    In contemporary consciousness studies the phenomenon of neural plasticity has received little attention despite the fact that neural plasticity is of still increased interest in neuroscience. We will, however, argue that neural plasticity could be of great importance to consciousness studies....... If consciousness is related to neural processes it seems, at least prima facie, that the ability of the neural structures to change should be reflected in a theory of this relationship "Neural plasticity" refers to the fact that the brain can change due to its own activity. The brain is not static but rather...... the relation between consciousness and brain functions. If consciousness is connected to specific brain structures (as a function or in identity) what happens to consciousness when those specific underlying structures change? It is therefore possible that the understanding and theories of neural plasticity can...

  18. A numerical basis for strain-gradient plasticity theory: Rate-independent and rate-dependent formulations

    DEFF Research Database (Denmark)

    Nielsen, Kim Lau; Niordson, Christian Frithiof

    2014-01-01

    of a single plastic zone is analyzed to illustrate the agreement with earlier published results, whereafter examples of (ii) multiple plastic zone interaction, and (iii) elastic–plastic loading/unloading are presented. Here, the simple shear problem of an infinite slab constrained between rigid plates......–plastic loading/unloading and the interaction of multiple plastic zones, is proposed. The predicted model response is compared to the corresponding rate-dependent version of visco-plastic origin, and coinciding results are obtained in the limit of small strain-rate sensitivity. First, (i) the evolution...

  19. Culex Verutus, a New Species of the Subgenus Culex (Diptera: Culicidae) from Sierra Leone

    Science.gov (United States)

    1986-01-01

    216 Cu7ex verutus, a new species of the subgenu s1 Cu7ex (Diptera: Culicidae) from Sierra Leone Ralph E. Harbach’ Walter Reed Biosystematics...sp. from Sierra Leone are described and illus- trated. The new species is compared to other members of the guiarti group. This paper describes a...new species of Cu7ex collected in Sierra Leone by Dr. Yiau-Min Huang and Mr. James Pecor during field studies conducted in 1984. The species has been

  20. The Anopheles (Anopheles) Crucians Subgroup in the United States (Diptera: Culicidae)

    Science.gov (United States)

    1976-01-01

    collected in light traps and dog-baited traps. Mosq. News 33:39-41. Darsie , R. F., Jr . 1949. Pupae of the anopheline mosquitoes of the north- eastern...United States (Diptera: Culicidae). Rev. de Entomol. 20:509-30. Darsie , R. F., Jr . 1973. A record of changes in mosquito taxonomy in the United States...of America, 1955-1972. Mosq. Syst. 5:187-93. 60 Darsie , R. F., Jr ., D. MacCreary, and L. A. Stearns. 1951. An annotated list of the mosquitoes of

  1. Toxicity of Thiophenes from Echinops transiliensis (Asteraceae) against Aedes aegypti (Diptera: Culicidae) Larvae

    Science.gov (United States)

    2014-01-01

    Toxicity of Thiophenes from Echinops transiliensis (Asteraceae) against Aedes aegypti (Diptera: Culicidae) Larvae by Hiroshi Nakano*a)b)c), Abbas...larvicides against Aedes aegypti . Structural differences among compounds 3, 5, and 8 consisted in differing AcO and OH groups attached to C(3’’) and C(4...mg/ml), 4 (LC50 , 17.95 mg/ml), 6 (LC50 , 18.55 mg/ml), and 7 (LC50 , 19.97 mg/ml). These data indicated that A. aegypti larvicidal activities of

  2. Mosquitos (Diptera: Culicidae) de los parques naturales de la Comunidad Valenciana

    OpenAIRE

    Bernués Bañeres, Alberto

    2013-01-01

    La familia Culicidae incluye algunas de las especies de dípteros más relevantes en el ámbito de la Salud Pública, no solo por las molestias que son capaces de causar debido a su tipo de alimentación hematófaga, sino por su capacidad para actuar como vectores de enfermedades de afección humana. Por este motivo, los mosquitos han sido, desde siempre, una de las dianas predilectas en los programas de control establecidos para la regulación de sus poblaciones y, por tanto, como medida profiláctic...

  3. [Assemblages of bloodsucking mosquito larvae (Diptera: Culicidae) in water bodies of the northern Kulunda steppe].

    Science.gov (United States)

    Belevich, O É; Iurchenko, Iu A

    2011-01-01

    The population structure of bloodsucking mosquito larvae in temporary and constant water bodies of the northern Kulunda steppe was investigated. The seasonal dynamics of the population density, the number of species in different types of reservoirs, and average density of each species are given. The productivity of water reservoirs in relation to mosquitoes of the family Culicidae is analyzed. The basic factors affecting the distribution of larvae of dominant species between different water bodies were revealed. The degree of correlation between the structure of bloodsucking mosquito larva assemblages and the type of the reservoir was established.

  4. Mode III effects on interface delamination

    DEFF Research Database (Denmark)

    Tvergaard, Viggo; Hutchinson, J.W.

    2008-01-01

    mode III has an effect. Subsequently, the focus is on crack growth along an interface between an elastic-plastic solid and an elastic substrate. The analyses are carried out for conditions of small-scale yielding, with the fracture process at the interface represented by a cohesive zone model. Due......For crack growth along an interface between dissimilar materials the effect of combined modes I, II and III at the crack-tip is investigated. First, in order to highlight situations where crack growth is affected by a mode III contribution, examples of material configurations are discussed where...... to the mismatch of elastic properties across the interface the corresponding elastic solution has an oscillating stress singularity, and this solution is applied as boundary conditions on the outer edge of the region analyzed. For several combinations of modes I, II and III crack growth resistance curves...

  5. Using magnetic levitation for non-destructive quality control of plastic parts.

    Science.gov (United States)

    Hennek, Jonathan W; Nemiroski, Alex; Subramaniam, Anand Bala; Bwambok, David K; Yang, Dian; Harburg, Daniel V; Tricard, Simon; Ellerbee, Audrey K; Whitesides, George M

    2015-03-04

    Magnetic levitation (MagLev) enables rapid and non-destructive quality control of plastic parts. The feasibility of MagLev as a method to: i) rapidly assess injection-molded plastic parts for defects during process optimization, ii) monitor the degradation of plastics after exposure to harsh environmental conditions, and iii) detect counterfeit polymers by density is demonstrated. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Informative document waste plastics

    NARCIS (Netherlands)

    Nagelhout D; Sein AA; Duvoort GL

    1989-01-01

    This "Informative document waste plastics" forms part of a series of "informative documents waste materials". These documents are conducted by RIVM on the indstruction of the Directorate General for the Environment, Waste Materials Directorate, in behalf of the program of

  7. A Plastic Menagerie

    Science.gov (United States)

    Hadley, Mary Jane

    2010-01-01

    Bobble heads had become quite popular, depicting all sorts of sports figures, animals, and even presidents. In this article, the author describes how her fourth graders made bobble head sculptures out of empty plastic drink bottles. (Contains 1 online resource.)

  8. Cortical plasticity and rehabilitation.

    Science.gov (United States)

    Moucha, Raluca; Kilgard, Michael P

    2006-01-01

    The brain is constantly adapting to environmental and endogenous changes (including injury) that occur at every stage of life. The mechanisms that regulate neural plasticity have been refined over millions of years. Motivation and sensory experience directly shape the rewiring that makes learning and neurological recovery possible. Guiding neural reorganization in a manner that facilitates recovery of function is a primary goal of neurological rehabilitation. As the rules that govern neural plasticity become better understood, it will be possible to manipulate the sensory and motor experience of patients to induce specific forms of plasticity. This review summarizes our current knowledge regarding factors that regulate cortical plasticity, illustrates specific forms of reorganization induced by control of each factor, and suggests how to exploit these factors for clinical benefit.

  9. Mechanical plasticity of cells

    Science.gov (United States)

    Bonakdar, Navid; Gerum, Richard; Kuhn, Michael; Spörrer, Marina; Lippert, Anna; Schneider, Werner; Aifantis, Katerina E.; Fabry, Ben

    2016-10-01

    Under mechanical loading, most living cells show a viscoelastic deformation that follows a power law in time. After removal of the mechanical load, the cell shape recovers only incompletely to its original undeformed configuration. Here, we show that incomplete shape recovery is due to an additive plastic deformation that displays the same power-law dynamics as the fully reversible viscoelastic deformation response. Moreover, the plastic deformation is a constant fraction of the total cell deformation and originates from bond ruptures within the cytoskeleton. A simple extension of the prevailing viscoelastic power-law response theory with a plastic element correctly predicts the cell behaviour under cyclic loading. Our findings show that plastic energy dissipation during cell deformation is tightly linked to elastic cytoskeletal stresses, which suggests the existence of an adaptive mechanism that protects the cell against mechanical damage.

  10. Targeting tumour Cell Plasticity

    Institute of Scientific and Technical Information of China (English)

    Elizabeth D. WILLIAMS

    2009-01-01

    @@ Her research is focused on understanding the mechanisms of tumour progression and metastasis, particularly in uro-logical carcinomas (bladder and prostate). Tumour cell plasticity, including epithelial-mesenchymal transition, is a cen-tral theme in Dr Williams' work.

  11. Laser cutting plastic materials

    Energy Technology Data Exchange (ETDEWEB)

    Van Cleave, R.A.

    1980-08-01

    A 1000-watt CO/sub 2/ laser has been demonstrated as a reliable production machine tool for cutting of plastics, high strength reinforced composites, and other nonmetals. More than 40 different plastics have been laser cut, and the results are tabulated. Applications for laser cutting described include fiberglass-reinforced laminates, Kevlar/epoxy composites, fiberglass-reinforced phenolics, nylon/epoxy laminates, ceramics, and disposable tooling made from acrylic.

  12. Localization of plastic deformation

    Energy Technology Data Exchange (ETDEWEB)

    Rice, J R

    1976-04-01

    The localization of plastic deformation into a shear band is discussed as an instability of plastic flow and a precursor to rupture. Experimental observations are reviewed, a general theoretical framework is presented, and specific calculations of critical conditions are carried out for a variety of material models. The interplay between features of inelastic constitutive description, especially deviations from normality and vertex-like yielding, and the onset of localization is emphasized.

  13. Development of plastic surgery

    Directory of Open Access Journals (Sweden)

    Pećanac Marija Đ.

    2015-01-01

    Full Text Available Introduction. Plastic surgery is a medical specialty dealing with corrections of defects, improvements in appearance and restoration of lost function. Ancient Times. The first recorded account of reconstructive plastic surgery was found in ancient Indian Sanskrit texts, which described reconstructive surgeries of the nose and ears. In ancient Greece and Rome, many medicine men performed simple plastic cosmetic surgeries to repair damaged parts of the body caused by war mutilation, punishment or humiliation. In the Middle Ages, the development of all medical braches, including plastic surgery was hindered. New age. The interest in surgical reconstruction of mutilated body parts was renewed in the XVIII century by a great number of enthusiastic and charismatic surgeons, who mastered surgical disciplines and became true artists that created new forms. Modern Era. In the XX century, plastic surgery developed as a modern branch in medicine including many types of reconstructive surgery, hand, head and neck surgery, microsurgery and replantation, treatment of burns and their sequelae, and esthetic surgery. Contemporary and future plastic surgery will continue to evolve and improve with regenerative medicine and tissue engineering resulting in a lot of benefits to be gained by patients in reconstruction after body trauma, oncology amputation, and for congenital disfigurement and dysfunction.

  14. Sorting Plastic Waste in Hydrocyclone

    Directory of Open Access Journals (Sweden)

    Ernestas Šutinys

    2011-02-01

    Full Text Available The article presents material about sorting plastic waste in hydrocyclone. The tests on sorting plastic waste were carried out. Also, the findings received from the performed experiment on the technology of sorting plastic waste are interpreted applying an experimental model of the equipment used for sorting plastics of different density.Article in Lithuanian

  15. [Mosquito fauna (Diptera:Culicidae) from Falcon State, Venezuela. I. New records and current checklist].

    Science.gov (United States)

    Navarro, J C; Bastidas, R J; Zavala, Y

    1994-01-01

    A total of 16 new species records of Culicidae from Falcon State was collected at the "Juan Crisostomo Falcon National Park" (Sierra de San Luis), Natural Monument "Cerro Santa Ana", Coro, and La Vela. Species of Sabethini, Culicini and Toxorhynchitini Tribes were found in natural breeding sites (Phytotelmata), with special occurrence in plants belonging to Tillandsia, Vriesea, Guzmania, Aechmea (Bromelianceae), Heliconia (Heliconiaceae), Calathea (Marantaceae) and Colocasia (Araceae). Aedini and Mansonini were collected only as adults. A specie of Culex (Carrollia) was collected from an artificial container. The Culicidae species belong to 6 genera out of the 23 genera reported from Venezuela (Culex, Wyeomyia, Johnbelkinia, Aedes, Psorophora, Mansonia and Coquillettidia) and to 5 Tribes out of the 9 present in the country. The Aedini, Sabethini and Culicini Tribes were richer in species with 5, 4 and 4 species, respectively, than the Mansonini (2 species) and Toxorhynchitini (1 species) Tribes. We discuss some bioecological aspects regarding the 16 new-species records in Falcon State and give a checklist of the mosquito species previously reported in the literature.

  16. Permethrin resistance in Aedes albopictus (Diptera: Culicidae) and associated fitness costs.

    Science.gov (United States)

    Chan, Hiang Hao; Zairi, Jaal

    2013-03-01

    Insecticide resistance has become a serious issue in vector management programs. Information on insecticidal resistance and its associated mechanisms is important for successful insecticide resistance management. The selection of a colony of permethrin-resistant Aedes albopictus (Skuse) (Diptera: Culicidae), originating from Penang Island, Malaysia, yielded high larval-specific resistance to permethrin and cross-resistance to deltamethrin. Synergism assays showed that the major mechanism underlying this resistance involves cytochrome P450 monooxygenase. The resistance is autosomal, polygenically inherited and incompletely dominant (D = 0.26). Resistant larvae were reared under different conditions to assess the fitness costs. Under high larval density, larval development time of the resistant SGI strain was significantly longer than the susceptible VCRU strain. In both high- and low-density conditions SGI showed a lower rate of emergence and survival compared with the VCRU strain. Resistant larvae were more susceptible to predation by Toxorhynchites splendens (Wiedemann) (Diptera: Culicidae) larvae. The body size of SGI females reared under high-density conditions was larger compared with females of the susceptible strain. SGI females survived longer when starved than did VCRU females. The energy reserve upon eclosion was positively correlated with the size of the adults.

  17. Diversidade de Culicidae durante os períodos crepusculares em bioma de Floresta Atlântica e paridade de Anopheles cruzii (Diptera: Culicidae Diversity of Culicidae during the crepuscular periods in Atlantic Forest biome and parity of Anopheles cruzii (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Ana C. D. Bona

    2008-03-01

    Full Text Available O objetivo da investigação foi analisar a variação da diversidade e abundância das espécies de Culicidae e sua relação com algumas variáveis ambientais, bem como estimar a taxa de paridade de Anopheles cruzii Dyar & Knab, 1908. O estudo foi desenvolvido em Floresta Ombrófila Densa da Mata Atlântica, localizada no Estado do Paraná, denominada de Floresta Estadual do Palmito. As capturas foram executadas quinzenalmente, de dezembro 2006 a março 2007, com a técnica de "aspiração menor", nos crepúsculos vespertino e matutino, iniciando antes dos crepúsculos e finalizando após os crepúsculos. Foram detectadas 25 espécies, sendo as mais abundantes, Anopheles cruzii (65,2%, Culex sachettae Sirivanakarn & Jacob, 1982 (11,2% e Anopheles bellator Dyar & Knab, 1906 (8,5%. De acordo com análise de variância, ocorreu diferença significativa na freqüência entre os períodos crepusculares para seguintes espécies: Aedes scapularis (Rondone, 1848 (p = 0,03651, Coquillettidia chrysonotum (Peryassu, 1922 (p = 0,00795, Mansonia fonsecai (Pinto, 1932 (p = 0,00804, e Runchomyia theobaldi Lane & Cerqueira, 1934 (p = 0,01996. Não houve correlação significativa com a abundância das principais espécies capturadas e as médias dos fatores abióticos avaliados. A taxa de paridade de Anopheles cruzii atingiu média percentual de 48%, não existindo correlação entre a abundância e a taxa de paridade. O crepúsculo exerce influência no comportamento apetente das espécies de Culicidae. A comparação de similaridade entre os crepúsculos apontou para elevada semelhança da composição específica. Anopheles cruzii atingiu dominância nos períodos vespertino e matutino, sendo a diversidade de forma geral reduzida nestes períodos.The aim of this investigation was to know the diversity and abundance of Culicidae associating with the climatic factors and obtaining the parity of Anopheles cruzii Dyar & Knab, 1908. The study was developed in a

  18. Dual-role plasticizer and dispersant for ceramic layers

    DEFF Research Database (Denmark)

    2016-01-01

    Thus, one aspect of the invention relates to a green ceramic layer comprising a ceramic material, a binder, and a dual-role dispersant and plasticizer, wherein said dual-role dispersant and plasticizer is an organic di- or tri-ester selected from compounds of formula (I), (II), (III) and (IV......). Another aspect of the present invention relates to a slurry for use in the manufacturing of a green ceramic layer comprising a ceramic material, a solvent, a binder, and a dual-role dispersant and plasticizer, wherein said dual role dispersant and plasticizer is an organic di- or tri- ester. Further...... aspects include uses of and methods of manufacturing said green ceramic layers....

  19. Culicidae (Diptera del arco sur de la Laguna de Mar Chiquita (Córdoba, Argentina y su importancia sanitaria Culicidae (Diptera from the southern coast of Mar Chiquita Lake (Cordoba, Argentina and their sanitary importance

    Directory of Open Access Journals (Sweden)

    Francisco Ludueña Almeida

    2004-12-01

    Full Text Available Se amplía la lista de veintidos especies de Culicidae citadas para el arco sur de la Laguna de Mar Chiquita a veintiocho. Aedeomyia squamipennis (Lynch Arribalzaga , Culex acharistus Root, Culex chidesteri Dyar, Haemagogus spegazzinii Brèthes, Mansonia titillans (Walker y Psorophora holmbergi Lynch Arribalzaga se citan por primera vez para la región. Se sintetizan los antecedentes relacionados con la importancia sanitaria de los culícidos de la zona.The list of twenty-two species of Culicidae from the southern coast of Mar Chiquita Lake is extended to twenty-eight. Aedeomyia squamipennis (Lynch Arribalzaga , Culex acharistus Root, Culex chidesteri Dyar, Haemagogus spegazzinii Brèthes , Mansonia titillans (Walker and Psorophora holmbergi Lynch Arribalzaga are listed for the first time for the region. The available information on sanitary importance of the culicids of the area is summarized.

  20. Leaf extracts of Melia azedarach Linnaeus (Sapindales: Meliaceae) act as larvicide against Aedes aegypti (Linnaeus, 1762) (Diptera: Culicidae) Extratos de folhas de Melia azedarach Linnaeus (Sapindales: Meliaceae) atuam como larvicida de Aedes aegypti (Linnaeus, 1762) (Diptera: Culicidae)

    OpenAIRE

    2008-01-01

    The objective of this study was to compare the larvicidal effect of hydroethanolic extracts of fresh and dry leaves of Melia azedarach Linnaeus (Sapindales: Meliaceae) on Aedes aegypti (Linnaeus, 1762) (Diptera: Culicidae). All the extracts evaluated induced mortality among the third and fourth instar larvae of Aedes aegypti after 24 and 48 hours of exposure to the products. Although previous studies had demonstrated the action of seeds and fruits of Melia azedarach against the larvae of diff...

  1. Population Dynamics and Plasmodium falciparum (Haemosporida: Plasmodiidae) Infectivity Rates for the Malaria Vector Anopheles arabiensis (Diptera: Culicidae) at Mamfene, KwaZulu-Natal, South Africa.

    Science.gov (United States)

    Dandalo, Leonard C; Brooke, Basil D; Munhenga, Givemore; Lobb, Leanne N; Zikhali, Jabulani; Ngxongo, Sifiso P; Zikhali, Phineas M; Msimang, Sipho; Wood, Oliver R; Mofokeng, Mohlominyana; Misiani, Eunice; Chirwa, Tobias; Koekemoer, Lizette L

    2017-09-06

    Anopheles arabiensis (Patton; Diptera: Culicidae) is a major malaria vector in the southern African region. In South Africa, effective control of this species using indoor-based interventions is reduced owing to its tendency to rest outdoors. As South Africa moves towards malaria elimination there is a need for complementary vector control strategies. One of the methods under consideration is the use of the sterile insect technique (SIT). Key to the successful implementation of an SIT programme is prior knowledge of the size and spatial distribution of the target population. Understanding mosquito population dynamics for both males and females is critical for efficient programme implementation. It is thus necessary to use outdoor-based population monitoring tools capable of sampling both sexes of the target population. In this project mosquito surveillance and evaluation of tools capable of collecting both genders were carried out at Mamfene in northern KwaZulu-Natal Province, South Africa, during the period January 2014 to December 2015. Outdoor- and indoor-resting Anopheles mosquitoes were sampled in three sections of Mamfene over the 2-yr sampling period using modified plastic buckets, clay pots and window exit traps. Morphological and molecular techniques were used for species identifications of all samples. Wild-caught adult females were tested for Plasmodium falciparum (Welch; Haemosporida: Plasmodiidae) infectivity. Out of 1,705 mosquitoes collected, 1,259 (73.8%) and 255 (15%) were identified as members of either the Anopheles gambiae complex or Anopheles funestus group respectively. An. arabiensis was the most abundant species contributing 78.8% of identified specimens. Mosquito density was highest in summer and lowest during winter. Clay pots yielded 16.3 mosquitoes per trap compared to 10.5 for modified plastic buckets over the 2-yr sampling period. P. falciparum infection rates for An. arabiensis were 0.7% and 0.5% for 2014 and 2015, respectively

  2. Leaf extracts of Melia azedarach Linnaeus (Sapindales: Meliaceae) act as larvicide against Aedes aegypti (Linnaeus, 1762) (Diptera: Culicidae)

    OpenAIRE

    2008-01-01

    The objective of this study was to compare the larvicidal effect of hydroethanolic extracts of fresh and dry leaves of Melia azedarach Linnaeus (Sapindales: Meliaceae) on Aedes aegypti (Linnaeus, 1762) (Diptera: Culicidae). All the extracts evaluated induced mortality among the third and fourth instar larvae of Aedes aegypti after 24 and 48 hours of exposure to the products. Although previous studies had demonstrated the action of seeds and fruits of Melia azedarach against the larvae of diff...

  3. SABIC Innovative Plastics: Be the World Best Plastic Resin Manufacturer

    Institute of Scientific and Technical Information of China (English)

    Jenny Du

    2007-01-01

    @@ "SABIC Innovative Plastics is a global supplier of plastic resins, manufacturing and compounding polycarbonate, ABS, SAN, ASA, PPE, PC/ABS, PBT and PEI resins, as well as the LNP* line of high performance specialty compounds," said Hiroshi Yoshida, the Global Market Director for Electronics of SABIC Innovative Plastics based in Tokyo at the press conference held by SABIC Innovative Plastics, November 8th 2007, Shanghai.

  4. Preserving in Plastic.

    Science.gov (United States)

    Wahla, James

    1985-01-01

    Outlines steps for casting insects in permanent molds prepared from commercially available liquid plastic. Also describes dry mountings in glass, acrylic, and petri dishes. The rationale for specimen use, hints for producing quality results, purchasing information, and safety precautions are considered. (DH)

  5. Informative document waste plastics

    NARCIS (Netherlands)

    Nagelhout D; Sein AA; Duvoort GL

    1989-01-01

    This "Informative document waste plastics" forms part of a series of "informative documents waste materials". These documents are conducted by RIVM on the indstruction of the Directorate General for the Environment, Waste Materials Directorate, in behalf of the program of acti

  6. Discrete dislocation plasticity

    NARCIS (Netherlands)

    van der Giessen, E.; Finel, A; Maziere, D; Veron, M

    2003-01-01

    Conventional continuum mechanics models of inelastic deformation processes axe size scale independent. In contrast, there is considerable experimental evidence that plastic flow in crystalline materials is size dependent over length scales of the order of tens of microns and smaller. At present ther

  7. Progress in neural plasticity

    Institute of Scientific and Technical Information of China (English)

    POO; Mu-Ming

    2010-01-01

    One of the properties of the nervous system is the use-dependent plasticity of neural circuits.The structure and function of neural circuits are susceptible to changes induced by prior neuronal activity,as reflected by short-and long-term modifications of synaptic efficacy and neuronal excitability.Regarded as the most attractive cellular mechanism underlying higher cognitive functions such as learning and memory,activity-dependent synaptic plasticity has been in the spotlight of modern neuroscience since 1973 when activity-induced long-term potentiation(LTP) of hippocampal synapses was first discovered.Over the last 10 years,Chinese neuroscientists have made notable contributions to the study of the cellular and molecular mechanisms of synaptic plasticity,as well as of the plasticity beyond synapses,including activity-dependent changes in intrinsic neuronal excitability,dendritic integration functions,neuron-glia signaling,and neural network activity.This work highlight some of these significant findings.

  8. New plastic recycling technology

    Science.gov (United States)

    Greater than 60% of the total plastic content of municipal solid waste is comprised of polyolefins (high-density, low-density, and linear polyethylene and polypropylene. Polyethylene (PE) is the largest-volume component but presents a challenge due to the absence of low-energy de...

  9. Persisting Plastic Addiction

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The policy on curbing plastic shopping bag use implemented three years ago has produced mixed results In a bustling farmers’market tucked in a narrow street in Xisanqi residential community in north Beijing,stalls selling vegetables,fruits and other foods line the sidewalk.

  10. Determination of Mosquitoes Fauna (Culicidae: Diptera in Poldokhtar County of Lorestan Province, 2015

    Directory of Open Access Journals (Sweden)

    Zahirnia A H

    2017-09-01

    Full Text Available Introduction: Insects as the largest category of arthropods include numerous groups and families that the most important of them belong to order Diptera, family Culicidae. Because of feeding on the human's blood, a number of species of this family have been known as responsible for the transmission of pathogens for many diseases such as malaria, filariasis, encephalitis, yellow fever and dengue fever in the world. Given that no research has been conducted to determine the fauna of existing mosquitoes in the city of Poldokhtar, Lorestan Province, the present study aimed to exactly determine the mosquitoes' fauna in this city to perform appropriate prevention measures. Methods: In this faunistic and cross-sectional descriptive study, four urban areas and four rural areas in four geographic directions in the city of Poldokhtar were determined. In each urban area, two places and in each designated rural area, four places including two human places and two animal places were selected. From the early of April 2015 to the early of January 2016, larvae, pupae and adult mosquitoes of the Culicidae family were collected. Sampling methods for larvae, pupae and mature were ladling, night catch, total and hand catch with an aspirator. Characteristics including the name of the collector, date of collection, code related to habitat, habitat status (permanent or temporary, type of vegetation cover, type of substrate, and the situation of sunlight were recorded in the related form. The samples were identified by resources and valid identification keys. The data were analyzed using the SPSS software version 19. Results: Totally, 5392 mosquito adults of the Culicidae family including 1818 mosquito adults and 3574 larvae in designated areas in the city as well as four rural areas were collected. The three genera Anopheles (21.9%, Culex (64.6%, and Culiseta (13.5% were diagnosed. Also, from three genera, 12 species were identified as follows: Culex theiler, Cx

  11. Nonlinear Progressive Collapse Analysis Including Distributed Plasticity

    Directory of Open Access Journals (Sweden)

    Mohamed Osama Ahmed

    2016-01-01

    Full Text Available This paper demonstrates the effect of incorporating distributed plasticity in nonlinear analytical models used to assess the potential for progressive collapse of steel framed regular building structures. Emphasis on this paper is on the deformation response under the notionally removed column, in a typical Alternate Path (AP method. The AP method employed in this paper is based on the provisions of the Unified Facilities Criteria – Design of Buildings to Resist Progressive Collapse, developed and updated by the U.S. Department of Defense [1]. The AP method is often used for to assess the potential for progressive collapse of building structures that fall under Occupancy Category III or IV. A case study steel building is used to examine the effect of incorporating distributed plasticity, where moment frames were used on perimeter as well as the interior of the three dimensional structural system. It is concluded that the use of moment resisting frames within the structural system will enhance resistance to progressive collapse through ductile deformation response and that it is conserative to ignore the effects of distributed plasticity in determining peak displacement response under the notionally removed column.

  12. A QSPR for the plasticization efficiency of polyvinylchloride plasticizers.

    Science.gov (United States)

    Chandola, Mridula; Marathe, Sujata

    2008-01-01

    A simple quantitative structure property relationship (QSPR) for correlating the plasticization efficiency of 25 polyvinylchloride (PVC) plasticizers was obtained using molecular modeling. The plasticizers studied were-aromatic esters (phthalate, terephthalate, benzoate, trimellitate), aliphatic esters (adipate, sebacate, azelate), citrates and a phosphate. The low temperature flex point, Tf, of plasticized polyvinylchloride resins was considered as an indicator of plasticization efficiency. Initially, we attempted to predict plasticization efficiency of PVC plasticizers from physical and structural descriptors derived from the plasticizer molecule alone. However, the correlation of these descriptors with Tf was not very good with R=0.78 and r2=0.613. This implied that the selected descriptors were unable to predict all the interactions between PVC and plasticizer. Hence, to account for these interactions, a model containing two polyvinylchloride (PVC) chain segments along with a plasticizer molecule in a simulation box was constructed, using molecular mechanics. A good QSPR equation correlating physical and structural descriptors derived from the model to Tf of the plasticized resins was obtained with R=0.954 and r2=0.909.

  13. Ovicidal activity of entomopathogenic hyphomycetes on Aedes aegypti (Diptera: Culicidae) under laboratory conditions.

    Science.gov (United States)

    Luz, C; Tai, M H H; Santos, A H; Rocha, L F N; Albernaz, D A S; Silva, H H G

    2007-09-01

    The ovicidal activity of 21 hyphomycete fungi species against Aedes aegypti (L.) (Diptera: Culicidae) was tested. Fungi with ovicidal activity developed on high numbers of eggs (> or =70%) during 25 d of exposure. A clear ovicidal activity with low values of hatch (1.3-40%) was observed after 25 d of incubation with Isaria farinosa (Holm: Fries) Fries, Paecilomyces carneus (Duché & Heim) Brown & Smith, Paecilomyces marquandii (Massee) Hughes, Isaria fumosorosea (Wize), Metarhizium anisopliae (Metschnikoff) Sorokin, Penicillium sp., Paecilomyces lilacinus (Thom) Samson, Beauveria bassiana (Balsamo) Vuillemin, and Evlachovaea kintrischica Borisov & Tarasov. More than 63% of eggs hatched after 25-d exposures to 11 other fungi species deemed as ineffective. These are the first results to show the effects of entomopathogenic fungi against eggs of Ae. aegypti, and they suggest their potential as control agents of this vector.

  14. Pupal dimensions as predictors of adult size in fitness studies of Aedes aegypti (Diptera: Culicidae).

    Science.gov (United States)

    Koenraadt, C J M

    2008-03-01

    Adult body size is a central life history character in mosquito fitness studies. I evaluated the predictive values of pupal cephalothorax length, cephalothorax width, and wet weight for adult size (wing length) of male and female Aedes aegypti (L.) (Diptera: Culicidae). Cephalothorax length was the most consistent and accurate predictor of adult size. Width of the cephalothorax and wet weight were more variable, and they significantly decreased shortly before adult emergence. I propose that cephalothorax length could be used as a proxy for adult size to test how physical and biological factors such as resource-limited environments and competition affect mosquito fitness with the advantage that the specimen does not need to be killed.

  15. [Detection of flavivirus in mosquitoes (Diptera: Culicidae) from Easter Island-Chile].

    Science.gov (United States)

    Collao, Ximena; Prado, Lorena; González, Christian; Vásquez, Ana; Araki, Romina; Henríquez, Tuki; Peña, Cindy M

    2015-02-01

    Flaviviruses are arthropod-borne viruses, mainly by mosquitoes of the genera Aedes and Culex (Culicidae) that are detected in tropical and subtropical areas. Main flaviviruses of public health importance are: dengue, West Nile virus, yellow fever, among others. In continental Chile, flaviviruses has not been detected. However, there are indigenous cases of dengue detected in Easter Island since 2002, as the presence of its vector Aedes aegypti. The aim of this study was: To determine diversity of flavivirus mosquitoes present in Easter Island. Thirty pools of mosquitoes collected in Hanga Roa were analyzed; a RT-PCR nested flavivirus was performed. Thirteen positive samples were detected and the amplification products were sequenced, identifying two specific flavivirus Insect, the Cell fusing agent virus and other related viruses Kamiti River. This is the first study in Chile showed the presence of flavivirus in vectors in Easter Island.

  16. National Mosquito (Diptera: Culicidae) Survey in The Netherlands 2010-2013.

    Science.gov (United States)

    Ibañez-Justicia, A; Stroo, A; Dik, M; Beeuwkes, J; Scholte, E J

    2015-03-01

    From 2010 onwards, a nationwide mosquito monitoring scheme has been conducted in The Netherlands with the aim of gaining crucial information about mosquito (Diptera: Culicidae) species composition, geographical distributions, biodiversity, and habitat preferences. The results of this study are based on 778 randomly sampled mosquito locations. These are divided into three main habitat types: urban, rural-agricultural, and natural areas. Twenty-seven mosquito species were found: 26 indigenous and 1 exotic, Aedes japonicus japonicus (Theobald, 1901). The preliminary results are presented here, with details of their species distribution and seasonality. Monitoring the temporal and spatial distribution of mosquitoes is an essential step in the risk analysis of emerging mosquito-borne diseases. © The Author 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  17. Sustainable reverse logistics for household plastic waste

    OpenAIRE

    Bing, X

    2014-01-01

    Summary of the thesis titled “Sustainable Reverse Logistics for Household Plastic Waste” PhD Candidate: Xiaoyun Bing Recycled plastic can be used in the manufacturing of plastic products to reduce the use of virgin plastics material. The cost of recycled plastics is usually lower than that of virgin plastics. Therefore, it is environmentally and economically beneficial to improve the plastic recycling system to ensure more plastic waste from households is properly collected and pr...

  18. Isolation and genetic characterization of Lysinibacillus sphaericus strains found in mosquito larvae (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Cavados CFG

    2017-02-01

    Full Text Available Clara de Fátima Gomes Cavados,1 Eder Soares Pires,1 Jeane Quintanilha Chaves,1 Danielle Nunes Alvarez,1 Helio Benites Gil,2 Iris Braz Ribeiro de Oliveira,2 Andrea de Barros Pinto Viviani Cunha,2 Carlos José Pereira da Cunha de Araújo-Coutinho2 1Laboratory of Bacterial Physiology, Fundação Oswaldo Cruz, Instituto Oswaldo Cruz, Rio de Janeiro, 2Superintendência de Controle de Endemias – SUCEN, São Paulo, Brazil Introduction: Lysinibacillus sphaericus is a highly effective and specific bioinsecticide used for the control of Culicidae larvae. Objective: This study aimed to identify and characterize L. sphaericus strains isolated from Culex quinquefasciatus larvae in Brazil. Methods: C. quinquefasciatus larvae were collected from streams in the urban area of São Paulo state. L. sphaericus strains were identified through cytomorphology, biochemical, and physiological analyses. Qualitative bioassays were performed to evaluate the toxicity of the strains against C. quinquefasciatus. The crystal compound protein pattern of L. sphaericus strains was analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis. Five reference strains were used as standards in all tests performed. Repetitive extragenic palindromic elements-polymerase chain reaction (REP-PCR was utilized in an attempt to differentiate pathogenic and nonpathogenic isolates. Results: Twenty-one strains were isolated. Only one presented toxic activity against C. quinquefasciatus. REP-PCR results identified 23 patterns among the 26 strains used in the study, and the fragment analysis showed low similarity (16% between L. sphaericus isolates and the five reference strains. Conclusion: Comparison of strains isolated in this study using REP-PCR showed a low similarity to other strains, demonstrating the high intraspecific variability for L. sphaericus. Keywords: Lysinibacillus sphaericus, Culicidae, SDS-PAGE, qualitative bioassays, REP-PCR, mosquitoes, entomopathogenic bacteria 

  19. Plasticity modeling & computation

    CERN Document Server

    Borja, Ronaldo I

    2013-01-01

    There have been many excellent books written on the subject of plastic deformation in solids, but rarely can one find a textbook on this subject. “Plasticity Modeling & Computation” is a textbook written specifically for students who want to learn the theoretical, mathematical, and computational aspects of inelastic deformation in solids. It adopts a simple narrative style that is not mathematically overbearing, and has been written to emulate a professor giving a lecture on this subject inside a classroom. Each section is written to provide a balance between the relevant equations and the explanations behind them. Where relevant, sections end with one or more exercises designed to reinforce the understanding of the “lecture.” Color figures enhance the presentation and make the book very pleasant to read. For professors planning to use this textbook for their classes, the contents are sufficient for Parts A and B that can be taught in sequence over a period of two semesters or quarters.

  20. Low temperature creep plasticity

    Directory of Open Access Journals (Sweden)

    Michael E. Kassner

    2014-07-01

    Full Text Available The creep behavior of crystalline materials at low temperatures (T < 0.3Tm is discussed. In particular, the phenomenological relationships that describe primary creep are reviewed and analyzed. A discussion of the activation energy for creep at T < 0.3Tm is discussed in terms of the context of higher temperature activation energy. The basic mechanism(s of low temperature creep plasticity are discussed, as well.

  1. CyberStorm III

    NARCIS (Netherlands)

    Luiijf, H.A.M.; et al

    2010-01-01

    Projectteam Cyber Storm III - De Verenigde Staten organiseerden de afgelopen jaren een reeks grootschalige ICT-crisisoefeningen met de naam Cyber Storm. Cyber Storm III is de derde oefening in de reeks. Het scenario van Cyber Storm III staat in het teken van grootschalige ICT-verstoringen, waarbij n

  2. New perspectives in plastic biodegradation.

    Science.gov (United States)

    Sivan, Alex

    2011-06-01

    During the past 50 years new plastic materials, in various applications, have gradually replaced the traditional metal, wood, leather materials. Ironically, the most preferred property of plastics--durability--exerts also the major environmental threat. Recycling has practically failed to provide a safe solution for disposal of plastic waste (only 5% out of 1 trillion plastic bags, annually produced in the US alone, are being recycled). Since the most utilized plastic is polyethylene (PE; ca. 140 million tons/year), any reduction in the accumulation of PE waste alone would have a major impact on the overall reduction of the plastic waste in the environment. Since PE is considered to be practically inert, efforts were made to isolate unique microorganisms capable of utilizing synthetic polymers. Recent data showed that biodegradation of plastic waste with selected microbial strains became a viable solution. Copyright © 2011 Elsevier Ltd. All rights reserved.

  3. Microelectronics plastic molded packaging

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D.R. [Ktech Corp., Albuquerque, NM (United States); Palmer, D.W.; Peterson, D.W. [Sandia National Lab., Albuquerque, NM (United States)] [and others

    1997-02-01

    The use of commercial off-the-shelf (COTS) microelectronics for nuclear weapon applications will soon be reality rather than hearsay. The use of COTS for new technologies for uniquely military applications is being driven by the so-called Perry Initiative that requires the U.S. Department of Defense (DoD) to accept and utilize commercial standards for procurement of military systems. Based on this philosophy, coupled with several practical considerations, new weapons systems as well as future upgrades will contain plastic encapsulated microelectronics. However, a conservative Department of Energy (DOE) approach requires lifetime predictive models. Thus, the focus of the current project is on accelerated testing to advance current aging models as well as on the development of the methodology to be used during WR qualification of plastic encapsulated microelectronics. An additional focal point involves achieving awareness of commercial capabilities, materials, and processes. One of the major outcomes of the project has been the definition of proper techniques for handling and evaluation of modern surface mount parts which might be used in future systems. This program is also raising the familiarity level of plastic within the weapons complex, allowing subsystem design rules accommodating COTS to evolve. A two year program plan is presented along with test results and commercial interactions during this first year.

  4. Interfacial interactions between plastic particles in plastics flotation.

    Science.gov (United States)

    Wang, Chong-qing; Wang, Hui; Gu, Guo-hua; Fu, Jian-gang; Lin, Qing-quan; Liu, You-nian

    2015-12-01

    Plastics flotation used for recycling of plastic wastes receives increasing attention for its industrial application. In order to study the mechanism of plastics flotation, the interfacial interactions between plastic particles in flotation system were investigated through calculation of Lifshitz-van der Waals (LW) function, Lewis acid-base (AB) Gibbs function, and the extended Derjaguin-Landau-Verwey-Overbeek potential energy profiles. The results showed that van der Waals force between plastic particles is attraction force in flotation system. The large hydrophobic attraction, caused by the AB Gibbs function, is the dominant interparticle force. Wetting agents present significant effects on the interfacial interactions between plastic particles. It is found that adsorption of wetting agents promotes dispersion of plastic particles and decreases the floatability. Pneumatic flotation may improve the recovery and purity of separated plastics through selective adsorption of wetting agents on plastic surface. The relationships between hydrophobic attraction and surface properties were also examined. It is revealed that there exists a three-order polynomial relationship between the AB Gibbs function and Lewis base component. Our finding provides some insights into mechanism of plastics flotation.

  5. [What do general, abdominal and vascular surgeons need to know on plastic surgery - aspects of plastic surgery in the field of general, abdominal and vascular surgery].

    Science.gov (United States)

    Damert, H G; Altmann, S; Stübs, P; Infanger, M; Meyer, F

    2015-02-01

    There is overlap between general, abdominal and vascular surgery on one hand and plastic surgery on the other hand, e.g., in hernia surgery, in particular, recurrent hernia, reconstruction of the abdominal wall or defect closure after abdominal or vascular surgery. Bariatric operations involve both special fields too. Plastic surgeons sometimes use skin and muscle compartments of the abdominal wall for reconstruction at other regions of the body. This article aims to i) give an overview about functional, anatomic and clinical aspects as well as the potential of surgical interventions in plastic surgery. General/abdominal/vascular surgeons can benefit from this in their surgical planning and competent execution of their own surgical interventions with limited morbidity/lethality and an optimal, in particular, functional as well as aesthetic outcome, ii) support the interdisciplinary work of general/abdominal/vascular and plastic surgery, and iii) provide a better understanding of plastic surgery and its profile of surgical interventions and options.

  6. Global Positioning System III (GPS III)

    Science.gov (United States)

    2015-12-01

    Military Operations in Urban Terrain; Defense-Wide Mission Support; Air Mobility; and Space Launch Orbital Support. For military users, the GPS III...program provides Precise Positioning Service (PPS) to military operations and force enhancement. It also provides increased anti-jam power to the earth ...to be modified . On January 31, 2016, USD(AT&L) signed the GPS III revised APB. This Change 1 to the APB was due to both cost and schedule breaches

  7. Tackling the growing threat of dengue: Phyllanthus niruri-mediated synthesis of silver nanoparticles and their mosquitocidal properties against the dengue vector Aedes aegypti (Diptera: Culicidae).

    Science.gov (United States)

    Suresh, Udaiyan; Murugan, Kadarkarai; Benelli, Giovanni; Nicoletti, Marcello; Barnard, Donald R; Panneerselvam, Chellasamy; Kumar, Palanisamy Mahesh; Subramaniam, Jayapal; Dinesh, Devakumar; Chandramohan, Balamurugan

    2015-04-01

    Mosquitoes are vectors of devastating pathogens and parasites, causing millions of deaths every year. Dengue is a mosquito-borne viral infection found in tropical and subtropical regions around the world. Recently, transmission has strongly increased in urban and semiurban areas, becoming a major international public health concern. Aedes aegypti (Diptera: Culicidae) is the primary vector of dengue. The use of synthetic insecticides to control Aedes mosquitoes lead to high operational costs and adverse nontarget effects. In this scenario, eco-friendly control tools are a priority. We proposed a novel method to synthesize silver nanoparticles using the aqueous leaf extract of Phyllanthus niruri, a cheap and nontoxic material. The UV-vis spectrum of the aqueous medium containing silver nanostructures showed a peak at 420 nm corresponding to the surface plasmon resonance band of nanoparticles. SEM analyses of the synthesized nanoparticles showed a mean size of 30-60 nm. EDX spectrum showed the chemical composition of the synthesized nanoparticles. XRD highlighted that the nanoparticles are crystalline in nature with face-centered cubic geometry. Fourier transform infrared spectroscopy (FTIR) of nanoparticles exhibited prominent peaks 3,327.63, 2,125.87, 1,637.89, 644.35, 597.41, and 554.63 cm(-1). In laboratory assays, the aqueous extract of P. niruri was toxic against larval instars (I-IV) and pupae of A. aegypti. LC50 was 158.24 ppm (I), 183.20 ppm (II), 210.53 ppm (III), 210.53 ppm (IV), and 358.08 ppm (pupae). P. niruri-synthesized nanoparticles were highly effective against A. aegypti, with LC50 of 3.90 ppm (I), 5.01 ppm (II), 6.2 ppm (III), 8.9 ppm (IV), and 13.04 ppm (pupae). In the field, the application of silver nanoparticles (10 × LC50) lead to A. aegypti larval reduction of 47.6%, 76.7% and 100%, after 24, 48, and 72 h, while the P. niruri extract lead to 39.9%, 69.2 % and 100 % of reduction, respectively. In adulticidal experiments, P. niruri extract

  8. Use of recycled plastics in wood plastic composites - a review.

    Science.gov (United States)

    Kazemi Najafi, Saeed

    2013-09-01

    The use of recycled and waste thermoplastics has been recently considered for producing wood plastic composites (WPCs). They have great potential for WPCs manufacturing according to results of some limited researches. This paper presents a detailed review about some essential properties of waste and recycled plastics, important for WPCs production, and of research published on the effect of recycled plastics on the physical and mechanical properties of WPCs.

  9. Direct liquefaction of plastics and coprocessing of coal with plastics

    Energy Technology Data Exchange (ETDEWEB)

    Huffman, G.P.; Feng, Z.; Mahajan, V. [Univ. of Kentucky, Lexington, KY (United States)

    1995-12-31

    The objectives of this work were to optimize reaction conditions for the direct liquefaction of waste plastics and the coprocessing of coal with waste plastics. In previous work, the direct liquefaction of medium and high density polyethylene (PE), polypropylene (PPE), poly(ethylene terephthalate) (PET), and a mixed plastic waste, and the coliquefaction of these plastics with coals of three different ranks was studied. The results established that a solid acid catalyst (HZSM-5 zeolite) was highly active for the liquefaction of the plastics alone, typically giving oil yields of 80-95% and total conversions of 90-100% at temperatures of 430-450 {degrees}C. In the coliquefaction experiments, 50:50 mixtures of plastic and coal were used with a tetralin solvent (tetralin:solid = 3:2). Using approximately 1% of the HZSM-5 catalyst and a nanoscale iron catalyst, oil yields of 50-70% and total conversion of 80-90% were typical. In the current year, further investigations were conducted of the liquefaction of PE, PPE, and a commingled waste plastic obtained from the American Plastics Council (APC), and the coprocessing of PE, PPE and the APC plastic with Black Thunder subbituminous coal. Several different catalysts were used in these studies.

  10. Plastic Surgery and Suicide: A Clinical Guide for Plastic Surgeons.

    Science.gov (United States)

    Reddy, Vikram; Coffey, M Justin

    2016-08-01

    Several studies have identified an increased risk of suicide among patient populations which a plastic surgeon may have a high risk of encountering: women undergoing breast augmentation, cosmetic surgery patients, and breast cancer patients. No formal guidelines exist to assist a plastic surgeon when faced with such a patient, and not every plastic surgery team has mental health clinicians that are readily accessible for consultation or referral. The goal of this clinical guide is to offer plastic surgeons a set of practical approaches to manage potentially suicidal patients. In addition, the authors review a screening tool, which can assist surgeons when encountering high-risk patients.

  11. Medical Entomology Studies - XVI. A Review of the Species of Subgenus Verrallina, Genus Aedes, from Sri Lanka and a Revised Description of the Subgenus (Diptera: Culicidae)

    Science.gov (United States)

    1984-01-01

    351-401. Diptera Nematocera from the Federated Malay States Museums. J. Fed. Malay States Mus. 14: 1-139, 2 pls. Diptera, Fam. Culicidae. In P...266-343. In M. D. Delfinado and D. E. Hardy, Ed. A catalog of the Diptera of the Oriental region. Volume I. Suborder Nematocera . Univ. Press Hawaii

  12. Tackling the growing threat of dengue: Phyllanthus niruri-mediated synthesis of silver nanoparticles and their mosquitocidal properties against the dengue vector Aedes aegypti (Diptera: Culicidae)

    Science.gov (United States)

    Mosquitoes transmit pathogens that cause millions of human deaths each year. Dengue virus is transmitted to humans in tropical and subtropical areas by Aedes aegypti (Diptera: Culicidae). The use of synthetic insecticides to control this mosquito is accompanied by high operational costs and adverse...

  13. Vector Competence of Peruvian Mosquitoes (Diptera:Culicidae) for a Subtype IIIC Strain in the Venezuelan Equine Encephalomyelitis Complex Isolated from Mosquitoes Captured in Peru

    Science.gov (United States)

    2006-03-01

    strains of Venezuelan equine encephalitis virus. J Am Mosq Control Assoc 15:295–298. Turell MJ, Gargan TP II, Bailey CL. 1984. Replication and dissemination...Venezuelan equine encephalitis (VEE) complex alphavirus by Culex (Melanoconion) gnomatos (Diptera: Culicidae) in northeastern Peru. J Med Entomol 42:404–408

  14. Tree plastic bark

    OpenAIRE

    Casado Arroyo, Carlos

    2016-01-01

    “Tree plastic bark" consiste en la realización de una intervención artística en un entorno natural concreto, generando de esta manera un Site Specific(1). Como hace alusión Rosalind Krauss en sus reflexiones “La escultura en el campo expandido”(2), comenta que su origen esta claramente ligado con el concepto de monumentalidad. La escultura es un monumento, se crea para conmemorar algún hecho o personaje relevante y está realizada para una ubicación concreta. La investigación parte de la id...

  15. Fabrication of plastic biochips

    Energy Technology Data Exchange (ETDEWEB)

    Saaem, Ishtiaq; Ma, Kuo-Sheng; Alam, S. Munir; Tian Jingdong [Department of Biomedical Engineering and Institute for Genome Sciences and Policy, Duke University, Durham, North Carolina 27708 (United States); Department of Medicine and Human Vaccine Institute, Duke University, Durham, North Carolina 27708 (United States); Department of Biomedical Engineering and Institute for Genome Sciences and Policy, Duke University, Durham, North Carolina 27708 (United States)

    2010-07-15

    A versatile surface functionalization procedure based on rf magnetron sputtering of silica was performed on poly(methylmethacrylate), polycarbonate, polypropylene, and cyclic olefin copolymers (Topas 6015). The hybrid thermoplastic surfaces were characterized by x-ray photoelectron spectrometer analysis and contact angle measurements. The authors then used these hybrid materials to perform a sandwich assay targeting an HIV-1 antibody using fluorescent detection and biotinylated peptides immobilized using the bioaffinity of biotin-neutravidin. They found a limit of detection similar to arrays on glass surfaces and believed that this plastic biochip platform may be used for the development of disposable immunosensing and diagnostic applications.

  16. Plastic food packaging and health

    Directory of Open Access Journals (Sweden)

    Raika Durusoy

    2011-02-01

    Full Text Available Plastics have a wide usage in our daily lives. One of their uses is for food packaging and food containers. The aim of this review is to introduce different types of chemicals that can leach from food packaging plastics into foods and cause human exposure and to mention their effects on health. The types of plastics were reviewed under the 13 headings in Turkish Codex Alimentarius and plastics recycling symbols were provided to enable the recognition of the type of plastic when applicable. Chemicals used during the production and that can cause health risks are investigated under the heading of the relevant type of plastic. The most important chemicals from plastic food packaging that can cause toxicity are styrene, 1,3-butadiene, melamine, formaldehyde, acrylamide, di-2-ethylhexyl phthalate, di-2-ethylhexyl adipate, vinyl chloride and bisphenol A. These chemicals have endocrine disrupting, carcinogenic and/or development disrupting effects. These chemicals may leach into foods depending on the chemical properties of the plastic or food, temperature during packaging, processing and storage, exposure to UV and duration of storage. Contact with fatty/oily or acidic foods, heating of the food inside the container, or drinking hot drinks from plastic cups, use of old and scratched plastics and some detergents increase the risk of leaching. The use of plastic containers and packaging for food and beveradges should be avoided whenever possible and when necessary, less harmful types of plastic should be preferred. [TAF Prev Med Bull 2011; 10(1.000: 87-96

  17. The commercialization of plastic surgery.

    Science.gov (United States)

    Swanson, Eric

    2013-09-01

    The last decade has brought a major challenge to the traditional practice of plastic surgery from corporations that treat plastic surgery as a commercial product and market directly to the public. This corporate medicine model may include promotion of a trademarked procedure or device, national advertising that promises stunning results, sales consultants, and claims of innovation, superiority, and improved safety. This article explores the ethics of this business practice and whether corporate medicine is a desirable model for patients and plastic surgeons.

  18. Bio-based and recycled polymers for cleaner production : an assessment of plastics and fibres

    OpenAIRE

    L. Shen

    2011-01-01

    Today, almost all man-made plastics and fibres are produced from synthetic polymers. Synthetic polymers, made from petroleum which took millions of years to form, have three sustainability challenges: (i) the limited fossil fuel resources, (ii) the environmental impacts caused by non-degradable plastics waste, and (iii) greenhouse gas emissions caused by combusting fossil fuels. To tackle these sustainability challenges, two strategies have been proposed. First, use bio-based polymers to repl...

  19. Bio-based and recycled polymers for cleaner production : an assessment of plastics and fibres

    OpenAIRE

    Shen, L.

    2011-01-01

    Today, almost all man-made plastics and fibres are produced from synthetic polymers. Synthetic polymers, made from petroleum which took millions of years to form, have three sustainability challenges: (i) the limited fossil fuel resources, (ii) the environmental impacts caused by non-degradable plastics waste, and (iii) greenhouse gas emissions caused by combusting fossil fuels. To tackle these sustainability challenges, two strategies have been proposed. First, use bio-based polymers to repl...

  20. Multiscale modeling and synaptic plasticity.

    Science.gov (United States)

    Bhalla, Upinder S

    2014-01-01

    Synaptic plasticity is a major convergence point for theory and computation, and the process of plasticity engages physiology, cell, and molecular biology. In its many manifestations, plasticity is at the hub of basic neuroscience questions about memory and development, as well as more medically themed questions of neural damage and recovery. As an important cellular locus of memory, synaptic plasticity has received a huge amount of experimental and theoretical attention. If computational models have tended to pick specific aspects of plasticity, such as STDP, and reduce them to an equation, some experimental studies are equally guilty of oversimplification each time they identify a new molecule and declare it to be the last word in plasticity and learning. Multiscale modeling begins with the acknowledgment that synaptic function spans many levels of signaling, and these are so tightly coupled that we risk losing essential features of plasticity if we focus exclusively on any one level. Despite the technical challenges and gaps in data for model specification, an increasing number of multiscale modeling studies have taken on key questions in plasticity. These have provided new insights, but importantly, they have opened new avenues for questioning. This review discusses a wide range of multiscale models in plasticity, including their technical landscape and their implications.

  1. Plastics recycling: challenges and opportunities

    National Research Council Canada - National Science Library

    Jefferson Hopewell; Robert Dvorak; Edward Kosior

    2009-01-01

    .... Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public...

  2. Americium behaviour in plastic vessels

    Energy Technology Data Exchange (ETDEWEB)

    Legarda, F.; Herranz, M. [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain); Idoeta, R., E-mail: raquel.idoeta@ehu.e [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain); Abelairas, A. [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain)

    2010-07-15

    The adsorption of {sup 241}Am dissolved in water in different plastic storage vessels was determined. Three different plastics were investigated with natural and distilled waters and the retention of {sup 241}Am by these plastics was studied. The same was done by varying vessel agitation time, vessel agitation speed, surface/volume ratio of water in the vessels and water pH. Adsorptions were measured to be between 0% and 70%. The adsorption of {sup 241}Am is minimized with no water agitation, with PET or PVC plastics, and by water acidification.

  3. Metallothionein (MT)-III

    DEFF Research Database (Denmark)

    Carrasco, J; Giralt, M; Molinero, A

    1999-01-01

    Metallothionein-III is a low molecular weight, heavy-metal binding protein expressed mainly in the central nervous system. First identified as a growth inhibitory factor (GIF) of rat cortical neurons in vitro, it has subsequently been shown to be a member of the metallothionein (MT) gene family...... and renamed as MT-III. In this study we have raised polyclonal antibodies in rabbits against recombinant rat MT-III (rMT-III). The sera obtained reacted specifically against recombinant zinc-and cadmium-saturated rMT-III, and did not cross-react with native rat MT-I and MT-II purified from the liver of zinc...... injected rats. The specificity of the antibody was also demonstrated in immunocytochemical studies by the elimination of the immunostaining by preincubation of the antibody with brain (but not liver) extracts, and by the results obtained in MT-III null mice. The antibody was used to characterize...

  4. Modelling the torsion of thin metal wires by distortion gradient plasticity

    Science.gov (United States)

    Bardella, Lorenzo; Panteghini, Andrea

    2015-05-01

    Under small strains and rotations, we apply a phenomenological higher-order theory of distortion gradient plasticity to the torsion problem, here assumed as a paradigmatic benchmark of small-scale plasticity. Peculiar of the studied theory, proposed about ten years ago by Morton E. Gurtin, is the constitutive inclusion of the plastic spin, affecting both the free energy and the dissipation. In particular, the part of the free energy, called the defect energy, which accounts for Geometrically Necessary Dislocations, is a function of Nye's dislocation density tensor, dependent on the plastic distortion, including the plastic spin. For the specific torsion problem, we implement this distortion gradient plasticity theory into a Finite Element (FE) code characterised by implicit (Backward Euler) time integration, numerically robust and accurate for both viscoplastic and rate-independent material responses. We show that, contrariwise to other higher-order theories of strain gradient plasticity (neglecting the plastic spin), the distortion gradient plasticity can predict some strengthening even if a quadratic defect energy is chosen. On the basis of the results of many FE analyses, concerned with (i) cyclic loading, (ii) switch in the higher-order boundary conditions during monotonic plastic loading, (iii) the use of non-quadratic defect energies, and (iv) the prediction of experimental data, we mainly show that (a) including the plastic spin contribution in a gradient plasticity theory is highly recommendable to model small-scale plasticity, (b) less-than-quadratic defect energies may help in describing the experimental results, but they may lead to anomalous cyclic behaviour, and (c) dissipative (unrecoverable) higher-order finite stresses are responsible for an unexpected mechanical response under non-proportional loading.

  5. [Erythropoietin in plastic surgery].

    Science.gov (United States)

    Günter, C I; Rezaeian, F; Harder, Y; Lohmeyer, J A; Egert, S; Bader, A; Schilling, A F; Machens, H-G

    2013-04-01

    EPO is an autologous hormone, which is known to regulate erythropoiesis. For 30 years it has been used for the therapy of diverse forms of anaemia, such as renal anaemia, tumour-related anaemias, etc. Meanwhile, a multitude of scientific publications were able to demonstrate its pro-regenerative effects after trauma. These include short-term effects such as the inhibition of the "primary injury response" or apoptosis, and mid- and long-term effects for example the stimulation of stem cell recruitment, growth factor production, angiogenesis and re-epithelialisation. Known adverse reactions are increases of thromboembolic events and blood pressure, as well as a higher mortality in patients with tumour anaemias treated with EPO. Scientific investigations of EPO in the field of plastic surgery included: free and local flaps, nerve regeneration, wound healing enhancement after dermal thermal injuries and in chronic wounds.Acute evidence for the clinical use of EPO in the field of plastic surgery is still not satisfactory, due to the insufficient number of Good Clinical Practice (GCP)-conform clinical trials. Thus, the initiation of more scientifically sound trials is indicated.

  6. Optogenetics and synaptic plasticity.

    Science.gov (United States)

    Xie, Yu-feng; Jackson, Michael F; Macdonald, John F

    2013-11-01

    The intricate and complex interaction between different populations of neurons in the brain has imposed limits on our ability to gain detailed understanding of synaptic transmission and its integration when employing classical electrophysiological approaches. Indeed, electrical field stimulation delivered via traditional microelectrodes does not permit the targeted, precise and selective control of neuronal activity amongst a varied population of neurons and their inputs (eg, cholinergic, dopaminergic or glutamatergic neurons). Recently established optogenetic techniques overcome these limitations allowing precise control of the target neuron populations, which is essential for the elucidation of the neural substrates underlying complex animal behaviors. Indeed, by introducing light-activated channels (ie, microbial opsin genes) into specific neuronal populations, optogenetics enables non-invasive optical control of specific neurons with milliseconds precision. These approaches can readily be applied to freely behaving live animals. Recently there is increased interests in utilizing optogenetics tools to understand synaptic plasticity and learning/memory. Here, we summarize recent progress in applying optogenetics in in the study of synaptic plasticity.

  7. Sustainable reverse logistics for household plastic waste

    NARCIS (Netherlands)

    Bing, X.

    2014-01-01

    Summary of the thesis titled “Sustainable Reverse Logistics for Household Plastic Waste” PhD Candidate: Xiaoyun Bing Recycled plastic can be used in the manufacturing of plastic products to reduce the use of virgin plastics material. The cost of recycled plastics is usually lower than th

  8. Sustainable reverse logistics for household plastic waste

    NARCIS (Netherlands)

    Bing, X.

    2014-01-01

    Summary of the thesis titled “Sustainable Reverse Logistics for Household Plastic Waste” PhD Candidate: Xiaoyun Bing Recycled plastic can be used in the manufacturing of plastic products to reduce the use of virgin plastics material. The cost of recycled plastics is usually lower than

  9. Sustainable reverse logistics for household plastic waste

    NARCIS (Netherlands)

    Bing, X.

    2014-01-01

    Summary of the thesis titled “Sustainable Reverse Logistics for Household Plastic Waste” PhD Candidate: Xiaoyun Bing Recycled plastic can be used in the manufacturing of plastic products to reduce the use of virgin plastics material. The cost of recycled plastics is usually lower than th

  10. Plastics recycling: challenges and opportunities.

    Science.gov (United States)

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-07-27

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3-4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it

  11. Plastics recycling: challenges and opportunities

    Science.gov (United States)

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-01-01

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3–4% is expended to provide energy for their manufacture. A major portion of plastic produced each year is used to make disposable items of packaging or other short-lived products that are discarded within a year of manufacture. These two observations alone indicate that our current use of plastics is not sustainable. In addition, because of the durability of the polymers involved, substantial quantities of discarded end-of-life plastics are accumulating as debris in landfills and in natural habitats worldwide. Recycling is one of the most important actions currently available to reduce these impacts and represents one of the most dynamic areas in the plastics industry today. Recycling provides opportunities to reduce oil usage, carbon dioxide emissions and the quantities of waste requiring disposal. Here, we briefly set recycling into context against other waste-reduction strategies, namely reduction in material use through downgauging or product reuse, the use of alternative biodegradable materials and energy recovery as fuel. While plastics have been recycled since the 1970s, the quantities that are recycled vary geographically, according to plastic type and application. Recycling of packaging materials has seen rapid expansion over the last decades in a number of countries. Advances in technologies and systems for the collection, sorting and reprocessing of recyclable plastics are creating new opportunities for recycling, and with the combined actions of the public, industry and governments it

  12. Larvicidal efficacy of different plant parts of railway creeper, Ipomoea cairica Extract Against Dengue Vector Mosquitoes, Aedes albopictus (Diptera: Culicidae) and Aedes aegypti (Diptera: Culicidae).

    Science.gov (United States)

    AhbiRami, Rattanam; Zuharah, Wan Fatma; Thiagaletchumi, Maniam; Subramaniam, Sreeramanan; Sundarasekar, Jeevandran

    2014-01-01

    Natural insecticides from plant origin against mosquito vectors have been the main concern for research due to their high level of eco-safety. Control of mosquitoes in their larval stages are an ideal method since Aedes larvae are aquatic, thus it is easier to deal with them in this habitat. The present study was specifically conducted to explore the larvicidal efficacy of different plant parts of Ipomoea cairica (L.) or railway creeper crude extract obtained using two different solvents; methanol and acetone against late third-stage larvae of Aedes albopictus (Skuse) and Aedes aegypti (L.) (Diptera: Culicidae). Plant materials of I. cairica leaf, flower, and stem were segregated, airdried, powdered, and extracted using Soxhlet apparatus. Larvicidal bioassays were performed by using World Health Organization standard larval susceptibility test method for each species which were conducted separately for different concentration ranging from 10 to 450 ppm. Both acetone and methanol extracts showed 100% mortality at highest concentration tested (450 ppm) after 24 h of exposure. Results from factorial ANOVA indicated that there were significant differences in larvicidal effects between mosquito species, solvent used and plant parts (F=5.71, df=2, Paegypti with LC50 of 101.94 ppm followed by Ae. albopictus with LC50 of 105.59 ppm compared with other fractions of I. cairica extract obtained from flower, stem, and when methanol are used as solvent. The larvae of Ae. aegypti appeared to be more susceptible to I. cairica extract with lower LC50 value compared with Ae. albopictus (F=8.83, df=1, Pinsecticide for the control of Aedes mosquitoes. This study quantified the larvicidal property of I. cairica extract, providing information on lethal concentration that may have potential for a more eco-friendly Aedes mosquito control program.

  13. Leaf extracts of Melia azedarach Linnaeus (Sapindales: Meliaceae) act as larvicide against Aedes aegypti (Linnaeus, 1762) (Diptera: Culicidae).

    Science.gov (United States)

    Prophiro, Josiane Somariva; Rossi, Juliana Chedid Nogared; Pedroso, Murilo Fernandes; Kanis, Luiz Alberto; Silva, Onilda Santos

    2008-01-01

    The objective of this study was to compare the larvicidal effect of hydroethanolic extracts of fresh and dry leaves of Melia azedarach Linnaeus (Sapindales: Meliaceae) on Aedes aegypti (Linnaeus, 1762) (Diptera: Culicidae). All the extracts evaluated induced mortality among the third and fourth instar larvae of Aedes aegypti after 24 and 48 hours of exposure to the products. Although previous studies had demonstrated the action of seeds and fruits of Melia azedarach against the larvae of different Aedes aegypti populations, the present report is the first to show the larvicidal effect of the fresh and dry leaves of this plant.

  14. Aedes aegypti (Diptera: Culicidae) in Mauritania: First Report on the Presence of the Arbovirus Mosquito Vector in Nouakchott.

    Science.gov (United States)

    Mint Lekweiry, Khadijetou; Ould Ahmedou Salem, Mohamed Salem; Ould Brahim, Khyarhoum; Ould Lemrabott, Mohamed Aly; Brengues, Cécile; Faye, Ousmane; Simard, Frédéric; Ould Mohamed Salem Boukhary, Ali

    2015-07-01

    Aedes aegypti L. (Diptera: Culicidae) is a major vector of yellow fever, dengue, and chikungunya viruses throughout tropical and subtropical areas of the world. Although the southernmost part of Mauritania along the Senegal river has long been recognized at risk of yellow fever transmission, Aedes spp. mosquitoes had never been reported northwards in Mauritania. Here, we report the first observation of Aedes aegypti aegypti (L.) and Aedes (Ochlerotatus) caspius (Pallas, 1771) in the capital city, Nouakchott. We describe the development sites in which larvae of the two species were found, drawing attention to the risk for emergence of arbovirus transmission in the city.

  15. [Culicidae (Diptera) in the dam area bordering the states of Santa Catarina and Rio Grande do Sul, Brazil].

    Science.gov (United States)

    Gomes, Almério C; Paula, Marcia B; Vitor Neto, João B; Borsari, Rodrigo; Ferraudo, Antonio S

    2009-01-01

    The Culicidae composition of the Barra Grande Lake situated between the municipalities of Esmeralda (Rio Grande do Sul State) and Anita Garibaldi (Santa Catarina State) was assessed by monthly samplings. Twenty-four species were identified from a total of 1,185 specimens (74.7% as adults and 25.3% as immatures), with Aedes fluviatilis Lutz as the most frequent species. Several species are new records, and some of them are of public health interest. It is suggested that local environmental changes may alter the relationship between humans and vector mosquitoes.

  16. Plastic in North Sea Fish

    NARCIS (Netherlands)

    Foekema, E.M.; Gruijter, de C.; Mergia, M.T.; Franeker, van J.A.; Murk, A.J.; Koelmans, A.A.

    2013-01-01

    To quantify the occurrence of ingested plastic in fish species caught at different geographical positions in the North Sea, and to test whether the fish condition is affected by ingestion of plastics, 1203 individual fish of seven common North Sea species were investigated: herring, gray gurnard, wh

  17. The scope of plastic surgery

    African Journals Online (AJOL)

    2013-08-03

    Aug 3, 2013 ... areas of surgery (especially general surgery), plastic surgeons are arguably the .... Who do you feel are experts in laparoscopic surgery? e (general surgeons) a. Maxillofacial .... of pressure sore. ORIF = open reduction internal fixation. ... Plastic versus cosmetic surgery: What's the difference? Plast Reconstr.

  18. New Life for Old Plastics

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Recycling joint venture utilizes innovative technology to reuse plastics Recycling,despite its green connotations,can be a messy business.In China,more than 400,000 companies are engaged in plastic recycling,but 70 percent of them are family enterprises,

  19. Computational strain gradient crystal plasticity

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Kysar, Jeffrey W.

    2014-01-01

    of plane crystal plasticity are studied: pure shear of a single crystal between rigid platens as well as plastic deformation around cylindrical voids in hexagonal close packed and face centered cubic crystals. Effective in-plane constitutive slip parameters for plane strain deformation of specifically...

  20. Architecture of European Plastic Surgery

    NARCIS (Netherlands)

    Nicolai, J. -P. A.; Banic, A.; Molea, G.; Mazzola, R.; Poell, J. G.

    2006-01-01

    The architecture of European Plastic Surgery was published in 1996 [Nicolai JPA, Scuderi N. Plastic surgical Europe in an organogram. Eur J Plast Surg 1996; 19: 253-6.] It is the objective of this paper to update information of that article. Continuing medical education (CME), science, training,

  1. Plastics for corrosion inhibition

    CERN Document Server

    Goldade, Victor A; Makarevich, Anna V; Kestelman, Vladimir N

    2005-01-01

    The development of polymer composites containing inhibitors of metal corrosion is an important endeavour in modern materials science and technology. Corrosion inhibitors can be located in a polymer matrix in the solid, liquid or gaseous phase. This book details the thermodynamic principles for selecting these components, their compatibility and their effectiveness. The various mechanisms of metal protection – barrier, inhibiting and electromechanical – are considered, as are the conflicting requirements placed on the structure of the combined material. Two main classes of inhibited materials (structural and films/coatings) are described in detail. Examples are given of structural plastics used in friction units subjected to mechano-chemical wear and of polymer films/coatings for protecting metal objects against corrosion.

  2. Universal features of amorphous plasticity

    Science.gov (United States)

    Budrikis, Zoe; Castellanos, David Fernandez; Sandfeld, Stefan; Zaiser, Michael; Zapperi, Stefano

    2017-07-01

    Plastic yielding of amorphous solids occurs by power-law distributed deformation avalanches whose universality is still debated. Experiments and molecular dynamics simulations are hampered by limited statistical samples, and although existing stochastic models give precise exponents, they require strong assumptions about fixed deformation directions, at odds with the statistical isotropy of amorphous materials. Here, we introduce a fully tensorial, stochastic mesoscale model for amorphous plasticity that links the statistical physics of plastic yielding to engineering mechanics. It captures the complex shear patterning observed for a wide variety of deformation modes, as well as the avalanche dynamics of plastic flow. Avalanches are described by universal size exponents and scaling functions, avalanche shapes, and local stability distributions, independent of system dimensionality, boundary and loading conditions, and stress state. Our predictions consistently differ from those of mean-field depinning models, providing evidence that plastic yielding is a distinct type of critical phenomenon.

  3. Phenotypic Plasticity and Species Coexistence.

    Science.gov (United States)

    Turcotte, Martin M; Levine, Jonathan M

    2016-10-01

    Ecologists are increasingly interested in predicting how intraspecific variation and changing trait values impact species interactions and community composition. For many traits, much of this variation is caused by phenotypic plasticity, and thus the impact of plasticity on species coexistence deserves robust quantification. Partly due to a lack of sound theoretical expectations, empirical studies make contradictory claims regarding plasticity effects on coexistence. Our critical review of this literature, framed in modern coexistence theory, reveals that plasticity affects species interactions in ways that could impact stabilizing niche differences and competitive asymmetries. However, almost no study integrates these measures to quantify the net effect of plasticity on species coexistence. To address this challenge, we outline novel empirical approaches grounded in modern theory.

  4. Imaging brain plasticity after trauma

    Institute of Scientific and Technical Information of China (English)

    Zhifeng Kou; Armin Iraji

    2014-01-01

    The brain is highly plastic after stroke or epilepsy;however, there is a paucity of brain plasticity investigation after traumatic brain injury (TBI). This mini review summarizes the most recent evidence of brain plasticity in human TBI patients from the perspective of advanced magnetic resonance imaging. Similar to other forms of acquired brain injury, TBI patients also demonstrat-ed both structural reorganization as well as functional compensation by the recruitment of other brain regions. However, the large scale brain network alterations after TBI are still unknown, and the ifeld is still short of proper means on how to guide the choice of TBI rehabilitation or treat-ment plan to promote brain plasticity. The authors also point out the new direction of brain plas-ticity investigation.

  5. Size effects in crystal plasticity

    DEFF Research Database (Denmark)

    Borg, Ulrik

    2007-01-01

    Numerical analyses of plasticity size effects have been carried out for different problems using a developed strain gradient crystal plasticiy theory. The theory employs higher order stresses as work conjugates to slip gradients and uses higher order boundary conditions. Problems on localization...... of plastic flow in a single crystal, grain boundary effects in a bicrystal, and grain size effects in a polycrystal are studied. Single crystals containing micro-scale voids have also been analyzed at different loading conditions with focus on the stress and deformation fields around the voids, on void...... growth and interaction between neighboring voids, and on a comparison between the developed strain gradient crystal plasticity theory and a discrete dislocation plasticity theory. Furthermore, voids and rigid inclusions in isotropic materials have been studied using a strain gradient plasticity theory...

  6. Nano-Ceramic Coated Plastics

    Science.gov (United States)

    Cho, Junghyun

    2013-01-01

    Plastic products, due to their durability, safety, and low manufacturing cost, are now rapidly replacing cookware items traditionally made of glass and ceramics. Despite this trend, some still prefer relatively expensive and more fragile ceramic/glassware because plastics can deteriorate over time after exposure to foods, which can generate odors, bad appearance, and/or color change. Nano-ceramic coatings can eliminate these drawbacks while still retaining the advantages of the plastic, since the coating only alters the surface of the plastic. The surface coating adds functionality to the plastics such as self-cleaning and disinfectant capabilities that result from a photocatalytic effect of certain ceramic systems. These ceramic coatings can also provide non-stick surfaces and higher temperature capabilities for the base plastics without resorting to ceramic or glass materials. Titanium dioxide (TiO2) and zinc oxide (ZnO) are the candidates for a nano-ceramic coating to deposit on the plastics or plastic films used in cookware and kitchenware. Both are wide-bandgap semiconductors (3.0 to 3.2 eV for TiO2 and 3.2 to 3.3 eV for ZnO), so they exhibit a photocatalytic property under ultraviolet (UV) light. This will lead to decomposition of organic compounds. Decomposed products can be easily washed off by water, so the use of detergents will be minimal. High-crystalline film with large surface area for the reaction is essential to guarantee good photocatalytic performance of these oxides. Low-temperature processing (nano-ceramic coatings (TiO2, ZnO) on plastic materials (silicone, Teflon, PET, etc.) that can possess both photocatalytic oxide properties and flexible plastic properties. Processing cost is low and it does not require any expensive equipment investment. Processing can be scalable to current manufacturing infrastructure.

  7. Biodegradability of degradable plastic waste.

    Science.gov (United States)

    Agamuthu, P; Faizura, Putri Nadzrul

    2005-04-01

    Plastic waste constitutes the third largest waste volume in Malaysian municipal solid waste (MSW), next to putrescible waste and paper. The plastic component in MSW from Kuala Lumpur averages 24% (by weight), whereas the national mean is about 15%. The 144 waste dumps in the country receive about 95% of the MSW, including plastic waste. The useful life of the landfills is fast diminishing as the plastic waste stays un-degraded for more than 50 years. In this study the compostability of polyethylene and pro-oxidant additive-based environmentally degradable plastics (EDP) was investigated. Linear low-density polyethylene (LLDPE) samples exposed hydrolytically or oxidatively at 60 degrees C showed that the abiotic degradation path was oxidative rather than hydrolytic. There was a weight loss of 8% and the plastic has been oxidized as shown by the additional carbonyl group exhibited in the Fourier transform infra red (FTIR) Spectrum. Oxidation rate seemed to be influenced by the amount of pro-oxidant additive, the chemical structure and morphology of the plastic samples, and the surface area. Composting studies during a 45-day experiment showed that the percentage elongation (reduction) was 20% for McD samples [high-density polyethylene, (HDPE) with 3% additive] and LL samples (LLDPE with 7% additive) and 18% reduction for totally degradable plastic (TDP) samples (HDPE with 3% additive). Lastly, microbial experiments using Pseudomonas aeroginosa on carbon-free media with degradable plastic samples as the sole carbon source, showed confirmatory results. A positive bacterial growth and a weight loss of 2.2% for degraded polyethylene samples were evident to show that the degradable plastic is biodegradable.

  8. Plasticity and beyond microstructures, crystal-plasticity and phase transitions

    CERN Document Server

    Hackl, Klaus

    2014-01-01

    The book presents the latest findings in experimental plasticity, crystal plasticity, phase transitions, advanced mathematical modeling of finite plasticity and multi-scale modeling. The associated algorithmic treatment is mainly based on finite element formulations for standard (local approach) as well as for non-standard (non-local approach) continua and for pure macroscopic as well as for directly coupled two-scale boundary value problems. Applications in the area of material design/processing are covered, ranging from grain boundary effects in polycrystals and phase transitions to deep-drawing of multiphase steels by directly taking into account random microstructures.

  9. Leaf extracts of Melia azedarach Linnaeus (Sapindales: Meliaceae act as larvicide against Aedes aegypti (Linnaeus, 1762 (Diptera: Culicidae Extratos de folhas de Melia azedarach Linnaeus (Sapindales: Meliaceae atuam como larvicida de Aedes aegypti (Linnaeus, 1762 (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Josiane Somariva Prophiro

    2008-12-01

    Full Text Available The objective of this study was to compare the larvicidal effect of hydroethanolic extracts of fresh and dry leaves of Melia azedarach Linnaeus (Sapindales: Meliaceae on Aedes aegypti (Linnaeus, 1762 (Diptera: Culicidae. All the extracts evaluated induced mortality among the third and fourth instar larvae of Aedes aegypti after 24 and 48 hours of exposure to the products. Although previous studies had demonstrated the action of seeds and fruits of Melia azedarach against the larvae of different Aedes aegypti populations, the present report is the first to show the larvicidal effect of the fresh and dry leaves of this plant.O objetivo deste trabalho foi comparar o efeito larvicida de extratos hidro-etanólicos de folhas verdes e secas de Melia azedarach Linnaeus (Sapindales: Meliaceae em Aedes aegypti (Linnaeus, 1762 (Diptera: Culicidae. Todos os extratos avaliados induziram mortalidade em larvas de 3º e 4º estágios de Aedes aegypti, após 24 e 48 horas de exposição aos produtos. Embora estudos prévios tenham demonstrado a ação de sementes e frutos de Melia azedarach em larvas de diferentes populações de Aedes aegypti, o presente estudo é o primeiro a reportar o efeito larvicida de folhas verdes e secas desta planta.

  10. Encontro de Haemagogus (Conopostegus leucocelaenus (Diptera: Culicidae, no Município de Porto Alegre, Estado do Rio Grande do Sul Finding of Haemagogus (Conopostegus leucocelaenus (Diptera: Culicidae, in the municipality of Porto Alegre, State of Rio Grande do Sul

    Directory of Open Access Journals (Sweden)

    Almério de Castro Gomes

    2007-08-01

    Full Text Available Em novembro de 2006, foi realizada uma investigação entomológica numa mata nativa do município de Porto Alegre, Estado do Rio Grande do Sul. O resultado foi a captura de várias espécies Culicidae, incluindo o primeiro registro da presença de Haemagogus leucocelaenus na localidade. Esta espécie é considerada vetora do vírus da febre amarela em alguns municípios do Estado, motivando esta comunicação para alertar sobre o potencial da área para circulação do agente etiológico desta doença.In November 2006, an entomological investigation was carried out in a native forest in the municipality of Porto Alegre, State of Rio Grande do Sul. The result was the capture of several Culicidae species, including the first recording of the presence of Haemagogus leucocelaenus in this locality. This species is considered to be a vector for the yellow fever virus in some municipalities of this State, and this was the motivation for the present communication, in order to warn regarding the potential of this area for circulation of the etiological agent for this disease.

  11. International policies to reduce plastic marine pollution from single-use plastics (plastic bags and microbeads): A review.

    Science.gov (United States)

    Xanthos, Dirk; Walker, Tony R

    2017-02-18

    Marine plastic pollution has been a growing concern for decades. Single-use plastics (plastic bags and microbeads) are a significant source of this pollution. Although research outlining environmental, social, and economic impacts of marine plastic pollution is growing, few studies have examined policy and legislative tools to reduce plastic pollution, particularly single-use plastics (plastic bags and microbeads). This paper reviews current international market-based strategies and policies to reduce plastic bags and microbeads. While policies to reduce microbeads began in 2014, interventions for plastic bags began much earlier in 1991. However, few studies have documented or measured the effectiveness of these reduction strategies. Recommendations to further reduce single-use plastic marine pollution include: (i) research to evaluate effectiveness of bans and levies to ensure policies are having positive impacts on marine environments; and (ii) education and outreach to reduce consumption of plastic bags and microbeads at source.

  12. Culicinae (Diptera: Culicidae Mosquitoes in Chabahar County, Sistan and Baluchistan Province, Southeastern Iran

    Directory of Open Access Journals (Sweden)

    SH Moosa-Kazemi

    2009-06-01

    Full Text Available  Background: Mosquito-borne diseases are a major public health threat in Iran. The objective of this study was to de­ter­mine the fauna of culicinae mosquitoes for future mosquito control programs.Methods: Three genera and eleven species of the subfamily Culicinae (Diptera: Culicidae were collected by dipping tech­nique and identified in Chabahar County, Sistan and Baluchistan Province, southeastern Iran, during January, Feb­ru­ary, and March 2007.Results: The collected species included:  Aedes vexans (new occurrence record for the province, Culex  arbieeni, Cx. bitaeniorhynchus, Cx. deserticola, Cx. hortensis, Cx. perexiguus, Cx. pipiens, Cx.  pseudovishnui, Cx. pusillus, Cx. quinquefasciatus, Cx. sinaiticus, Cx. theileri, Cx. tritaeniorhynchus, Culiseta longiareolata, Ochlerotatus cabal­lus, Oc. caspius, and Uranotaenia unguiculata.Conclusion: Our observations indicate that, in South of Iran hot and wet climatic conditions support the persistence of culicinae mosquitoes. As our study, regular monitoring of culicinae mosquitoes in this area could be the most use­ful for mosquito control and mosquito-borne disease prevention.

  13. Culicinae (Diptera: Culicidae Mosquitoes in Chabahar County, Sistan and Baluchistan Province, Southeastern Iran

    Directory of Open Access Journals (Sweden)

    SH Moosa-Kazemi

    2009-07-01

    Full Text Available   Abstract Background: Mosquito-borne diseases are a major public health threat in Iran. The objective of this study was to de­ter­mine the fauna of culicinae mosquitoes for future mosquito control programs."nMethods: Three genera and eleven species of the subfamily Culicinae (Diptera: Culicidae were collected by dipping tech­nique and identified in Chabahar County, Sistan and Baluchistan Province, southeastern Iran, during January, Feb­ru­ary, and March 2007."nResults: The collected species included:  Aedes vexans (new occurrence record for the province, Culex  arbieeni, Cx. bitaeniorhynchus, Cx. deserticola, Cx. hortensis, Cx. perexiguus, Cx. pipiens, Cx.  pseudovishnui, Cx. pusillus, Cx. quinquefasciatus, Cx. sinaiticus, Cx. theileri, Cx. tritaeniorhynchus, Culiseta longiareolata, Ochlerotatus cabal­lus, Oc. caspius, and Uranotaenia unguiculata."nConclusion: Our observations indicate that, in South of Iran hot and wet climatic conditions support the persistence of culicinae mosquitoes. As our study, regular monitoring of culicinae mosquitoes in this area could be the most use­ful for mosquito control and mosquito-borne disease prevention.

  14. Biodiversity and Temporal Distribution of Immature Culicidae in the Atlantic Forest, Rio de Janeiro State, Brazil

    Science.gov (United States)

    de Mello, Cecília Ferreira; Guimarães, Anthony Érico; Gil-Santana, Hélcio R.; Gleiser, Raquel M.

    2016-01-01

    To increase the knowledge of biodiversity and identify larval habitats used by immature mosquitoes in the Atlantic Forest, we conducted a study in areas with various stages of preservation within the Guapiaçu Ecological Reserve in Cachoeiras de Macacu, Rio de Janeiro state. The Culicidae fauna were sampled during February, April, June, August, October, and December 2012; February, March, April, May, June, August, October, and December 2013; and January and March 2014. Immature mosquitoes were collected with dippers and suction tubes (mouth aspirators). Over the sampling period, 2697 larvae of 56 species were collected, some of which are recognized vectors of human diseases. The larval mosquito community found in artificial habitats, temporary ground water, and phytotelmata differed between sites, except for the mosquito fauna in bromeliads, which were almost 80% similar. Species segregation was more evident between larval habitats than between sites. Culex usquatus was the dominant species and colonized the highest number of larval habitats. The artificial larval habitats found in REGUA were colonized by a great diversity of species and high abundance as well, thus human artifacts left by the public in the area that collect water may promote an increase in mosquito populations. Among the species collected, some are known or suspected vectors of pathogens to humans and/or veterinary relevance, and their medical relevance is discussed. PMID:27404496

  15. MOSQUITO (DIPTERA: CULICIDAE AS A BIOINDICATOR OF ENVIRONMENTAL HEALTH AND DISEASE OUTBREAK

    Directory of Open Access Journals (Sweden)

    Sugeng Juwono Mardihusodo

    2006-11-01

    Full Text Available Quality of public health is greatly influenced by a lot of environmental factors, especially biotic factors among wich is a group of hematophagus mosquitoes (Diptera: Culicidae showing high competence as disease vector(s. The vector mosquitoes belong to different species of different genera: *Anopheles, Aedes, Culex*, and *Mansonia.*In hypersensitive individuals, mosquito bites may induce pain and itching on the skin where the mosquito suck blood, allergic dermatitis leads up to dermatosis, even persistently, causing nuisance. Through the mosquito bites, man may risk to being infected with pathogens causing Malaria, Dengue Haemorrhagic Fever (DHF, Chikungunya, Japanese Encephalitis (JE, and Lymphatic filariasis, specifically in areas where the mosquito-borne disease (MBD is (are endemic. Survival of a mosquito vector species of disease vector is much dependent on its environment, mainly on the availability of a number of suitable habitats for its pre-adult stages, larvae and pupae. Number, type and size of the larval habitats as well as quality of water in the mosquito breeding places apparently determine rates of survival and density of the mosquito breeding in it which generally positively correlate with the increase of the MBD transmission. Therefore, mosquito mainly a disease vector could be used as one of the bioindicators of environment health and its significant increase in density is predictive of the probable occurrence of a MBD epidemic in a communityliving in an endemic area.

  16. Biodiversity and Temporal Distribution of Immature Culicidae in the Atlantic Forest, Rio de Janeiro State, Brazil.

    Science.gov (United States)

    Alencar, Jeronimo; de Mello, Cecília Ferreira; Serra-Freire, Nicolau Maués; Guimarães, Anthony Érico; Gil-Santana, Hélcio R; Gleiser, Raquel M

    2016-01-01

    To increase the knowledge of biodiversity and identify larval habitats used by immature mosquitoes in the Atlantic Forest, we conducted a study in areas with various stages of preservation within the Guapiaçu Ecological Reserve in Cachoeiras de Macacu, Rio de Janeiro state. The Culicidae fauna were sampled during February, April, June, August, October, and December 2012; February, March, April, May, June, August, October, and December 2013; and January and March 2014. Immature mosquitoes were collected with dippers and suction tubes (mouth aspirators). Over the sampling period, 2697 larvae of 56 species were collected, some of which are recognized vectors of human diseases. The larval mosquito community found in artificial habitats, temporary ground water, and phytotelmata differed between sites, except for the mosquito fauna in bromeliads, which were almost 80% similar. Species segregation was more evident between larval habitats than between sites. Culex usquatus was the dominant species and colonized the highest number of larval habitats. The artificial larval habitats found in REGUA were colonized by a great diversity of species and high abundance as well, thus human artifacts left by the public in the area that collect water may promote an increase in mosquito populations. Among the species collected, some are known or suspected vectors of pathogens to humans and/or veterinary relevance, and their medical relevance is discussed.

  17. Development of the immature stages of Culex (Culex saltanensis Dyar (Diptera, Culicidae under laboratory conditions

    Directory of Open Access Journals (Sweden)

    João Antonio C. Zequi

    2012-03-01

    Full Text Available Development of the immature stages of Culex (Culex saltanensis Dyar (Diptera, Culicidae under laboratory conditions. Culex (Culex saltanensis Dyar, 1928 is becoming frequent and abundant in natural and artificial breeding sites in urban and rural areas of Brazil. This study contributes to the knowledge of the biology of a Brazilian strain of C. saltanensis. The development of specimens reared individually or grouped was observed. The study was conducted at a constant temperature of 27 ± 2°C, 14L:10D photoperiod and 80 ± 5% relative humidity. The immature stages were observed every 6 hours until adult emergence, which occurred in 12.29 days among individually reared specimens and in 13.12 days among group-reared specimens. Egg rafts for the experiment were obtained from the laboratory and field. Eggs hatched at a rate of 97.48 ± 2.32%. More eggs per egg raft were obtained from the field than from the laboratory. Males from individually reared specimens emerged in 12.29 ± 1.11 days and females in 13.12 ± 1.58 days. The male-female ratio was 1:1. Larval survival rate was higher than 85% for larvae reared isolated and higher than 95% for group-reared larvae. The Culex saltanensis life cycle was completed within 12 to 14 days, where larval instars I and IV took the most time to develop and the pupae, the shortest.

  18. Screening of Asteraceae (Compositae Plant Extracts for Larvicidal Activity against Aedes fluviatilis (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Macêdo Maria E

    1997-01-01

    Full Text Available Ethanol extracts of 83 plants species belonging to the Asteraceae (Compositae family, collected in the State of Minas Gerais, Brazil, were tested for larvicidal activity against the mosquito Aedes fluviatilis - Diptera: Culicidae. The extract from Tagetes minuta was the most active with a LC90 of 1.5 mg/l and LC50 of 1.0 mg/l. This plant has been the object of several studies by other groups and its active components have already been identified as thiophene derivatives, a class of compounds present in many Asteraceae species. The extract of Eclipta paniculata was also significantly active, with a LC90 of 17.2 mg/l and LC50 of 3.3 mg/l and no previous studies on its larvicidal activity or chemical composition could be found in the literature. Extracts of Achryrocline satureoides, Gnaphalium spicatum, Senecio brasiliensis, Trixis vauthieri, Tagetes patula and Vernonia ammophila were less active, killing more than 50% of the larvae only at the higher dose tested (100 mg/l.

  19. Molecular ecological analysis of planktonic bacterial communities in constructed wetlands invaded by Culex (Diptera: Culicidae) mosquitoes.

    Science.gov (United States)

    Popko, David A; Han, Suk-Kyun; Lanoil, Brian; Walton, William E

    2006-11-01

    The succession of the planktonic bacterial community during the colonization by Culex (Diptera: Culicidae) mosquitoes of 0.1-ha treatment wetlands was studied using denaturing gradient gel electrophoresis (DGGE) methodology. Relationships between apparent bacterial diversity and ecological factors (water quality, total bacterial counts, and immature mosquito abundance) were determined during a 1-mo flooding period. Analysis of DGGE banding patterns indicated that days postflooding and temporal changes in water quality were the primary and secondary determinants, respectively, of diversity in bacterial communities. Lower levels of diversity were associated with later postflood stages and increases in ammoniacal nitrogen concentration and total bacterial counts. Diversity was therefore most similar for bacteria present on the same sampling date at wetland locations with similar flooding regimes and water quality, suggesting that wastewater input was the driving force shaping bacterial communities. Comparatively small changes in bacterial diversity were connected to natural processes as water flowed through the wetlands. Greater immature mosquito abundance coincided with less diverse communities composed of greater total numbers of bacteria. Five individual DGGE bands were directly associated with fluctuations in mosquito production, and an additional 16 bands were associated with hydrological aspects of the environment during the rise and fall of mosquito populations. A marked decline in mosquito numbers 21 d after inundation may have masked associations of bacterial communities and mosquito recruitment into the sparsely vegetated wetlands. DGGE was an effective tool for the characterization of bacteria in mosquito habitat in our study, and its potential application in mosquito ecology is discussed.

  20. Assessing the Susceptibility Status of Mosquitoes (Diptera: Culicidae in a Dirofilariasis Focus, Northwestern Iran

    Directory of Open Access Journals (Sweden)

    Abolfazl Ataie

    2015-10-01

    Full Text Available Background: Mosquitoes are considered as the vectors of dirofilariasis and some vector borne disease in Iran. The objective of this study was to determine the susceptibility level of the vectors to various insecticides recommended by WHO for any control measures in an endemic area in northwestern Iran.Methods: Mosquito larval and adult collections were carried out using different methods provided by WHO including dipping and hand catch techniques. The susceptibility level was assessed to DDT 4%, malathion 5%, propoxur 0.1%, deltamethrin 0.05% and lambda-cyhalothrin 0.05%.Results: Totally, 749 adults and 5060 larvae of Culicidae mosquitoes were collected comprising seven species of adult and larvae, including: Anopheles claviger, An. maculipennis, An. sacharovi, Culex hortensis, Cx. pipiens, Cx. theileri and Culiseta longiaerolata. Frequency of larvae and adults of An. maculipennis was very low, so susceptibility tests on this species did not performed. Results showed that Cx. theileri, Cs. longiaerolata and Cx. pipiens were resistant to DDT 4%, lambda-cyhalothrin 0.05%, and propoxur 0.1% whereas found tolerant to deltamethrin 0.05% and malathion 5%. The LT50 and LT90 values for five insecticides were calculated.Conclusion: We suggest the same study in different parts of the world to obtain the data due to bionomic and susceptibility status of dirofilariasis vectors. This information will help the health authorities for monitoring and evaluation of control measures.

  1. Experimental and natural vertical transmission of West Nile virus by California Culex (Diptera: Culicidae) mosquitoes.

    Science.gov (United States)

    Nelms, Brittany M; Fechter-Leggett, Ethan; Carroll, Brian D; Macedo, Paula; Kluh, Susanne; Reisen, William K

    2013-03-01

    Culex (Diptera: Culicidae) mosquitoes, the primary summer vectors of West Nile virus (family Flaviviridae, genus Flavivirus, WNV), also may serve as overwintering reservoir hosts. Detection of WN viral RNA from larvae hatched from eggs deposited by infected females during late summer and fall may provide evidence for the vertical passage of WNV to overwintering cohorts. To determine whether vertical transmission to the overwintering generation occurs in populations of Culex mosquitoes throughout California, larvae from naturally infected females were tested by family for WN viral RNA by real-time quantitative reverse transcription-polymerase chain reaction during August through October 2011. Viral RNA was detected in 34 of 934 Culex tarsalis Coquillett and Cx. pipiens complex females that laid viable egg rafts. From these egg rafts, first-instar larvae from nine families tested positive, yielding an overall field vertical transmission rate of 26% (n = 34). To determine whether the WNV may be lost transtadially during development to the adult stage, first-instar larvae and adult progeny from experimentally infected Cx. pipiens complex females were assessed for the presence and quantity of WN viral RNA. Most (approximately 75%) WNV infections were lost from positive families during larval development to the adult stage. In field and laboratory studies, only infected mothers with mean cycle threshold scores Culex mosquitoes collected throughout California during late summer and fall, with females having high titered infections capable of passing WNV onto their progeny destined for overwintering.

  2. Considerations for accurate identification of adult Culex restuans (Diptera: Culicidae) in field studies.

    Science.gov (United States)

    Harrington, Laura C; Poulson, Rebecca L

    2008-01-01

    Understanding the ecology and behavior of different mosquito species (Diptera: Culicidae) is essential for identifying their role in disease transmission cycles and public health risk. Two species of Culex mosquitoes in the northeastern United States, Culex pipiens L. and Culex restuans Theobald, have been implicated in enzootic transmission of West Nile virus (family Flaviviridae, genus Flavivirus, WNV). Despite the difficulty of differentiating these two species as adults, many public health workers and vector biologists collecting adults in the field separate these species based on external morphology. This approach is often used rather than examination of dissected male genitalia or polymerase chain reaction (PCR)-based diagnostics due to time or cost constraints. We evaluated the reliability of seven published morphological characters to differentiate adults of these species by comparing blindly scored morphology with PCR-based confirmations. Our study demonstrates that morphological identification of Cx. pipiens is marginal and often not reliable for Cx. restuans. We also examined error rates with molecular-based approaches. DNA samples were contaminated with as little as one leg from another species. We conclude that to fully understand the respective roles of Culex species in the epidemiology of WNV and other pathogens, more attention should be paid to these considerations for accurate species identification.

  3. Derris (Lonchocarpus urucu (Leguminosae Extract Modifies the Peritrophic Matrix Structure of Aedes aegypti (Diptera:Culicidae

    Directory of Open Access Journals (Sweden)

    Gusmão Desiely Silva

    2002-01-01

    Full Text Available Aqueous suspension of ethanol extracts of Derris (Lonchocarpus urucu (Leguminosae, collected in the state of Amazonas, Brazil, were tested for larvicidal activity against the mosquito Aedes aegypti (Diptera:Culicidae. The aim of this study was to observe the alterations of peritrophic matrix in Ae. aegypti larvae treated with an aqueous suspension of D. urucu extract. Different concentrations of D. urucu root extract were tested against fourth instar larvae. One hundred percent mortality was observed at 150 µg/ml (LC50 17.6 µg/ml 24 h following treatment. In response to D. urucu feeding, larvae excreted a large amount of amorphous feces, while control larvae did not produce feces during the assay period. Ultrastructural studies showed that larvae fed with 150 µg/ml of D. urucu extract for 4 h have an imperfect peritrophic matrix and extensive damage of the midgut epithelium. Data indicate a protective role for the peritrophic matrix. The structural modification of the peritrophic matrix is intrinsically associated with larval mortality.

  4. Occurrence of Borrelia burgdorferi s.l. in different genera of mosquitoes (Culicidae) in Central Europe.

    Science.gov (United States)

    Melaun, Christian; Zotzmann, Sina; Santaella, Vanesa Garcia; Werblow, Antje; Zumkowski-Xylander, Helga; Kraiczy, Peter; Klimpel, Sven

    2016-03-01

    Lyme disease or Lyme borreliosis is a vector-borne infectious disease caused by spirochetes of the Borrelia burgdorferi sensu lato complex. Some stages of the borrelial transmission cycle in ticks (transstadial, feeding and co-feeding) can potentially occur also in insects, particularly in mosquitoes. In the present study, adult as well as larval mosquitoes were collected at 42 different geographical locations throughout Germany. This is the first study, in which German mosquitoes were analyzed for the presence of Borrelia spp. Targeting two specific borrelial genes, flaB and ospA encoding for the subunit B of flagellin and the outer surface protein A, the results show that DNA of Borrelia afzelii, Borrelia bavariensis and Borrelia garinii could be detected in ten Culicidae species comprising four distinct genera (Aedes, Culiseta, Culex, and Ochlerotatus). Positive samples also include adult specimens raised in the laboratory from wild-caught larvae indicating that transstadial and/or transovarial transmission might occur within a given mosquito population.

  5. Molecular Characterization of Mosquitoes (Diptera: Culicidae) in Northwestern Iran by Using rDNA-ITS2.

    Science.gov (United States)

    Khoshdel-Nezamiha, Farahnaz; Vatandoost, Hassan; Oshaghi, Mohammad Ali; Azari-Hamidian, Shahyad; Mianroodi, Reza Arabi; Dabiri, Farrokh; Bagheri, Masoomeh; Terenius, Olle; Chavshin, Ali Reza

    2016-07-22

    Several mosquito species are vectors of disease; however, to understand their role in disease transmission, accurate species identification is of particular importance. Morphological identification is the main method used, but molecular techniques have emerged as a tool for the identification of closely related species. In this study, mosquitoes from the West Azerbaijan Province in northwestern Iran were characterized on the basis of their rDNA-ITS2 sequences. Nine populations of 6 species of mosquitoes belonging to the genera Anopheles, Culex, Culiseta, and Ochlerotatus were studied. To the best of our knowledge, ITS2 sequences of Culiseta longiareolata and Culex hortensis have been reported for the first time. In addition, ITS2 sequences of Culex theileri and Ochlerotatus caspius have been reported for the first time in Iran. Phylogenetic analysis based on ITS2 showed that subfamilies Anophelinae and Culicinae of the family Culicidae could be differentiated successfully and subgenera Anopheles and Cellia of the genus Anopheles were separated. The analysis showed that the genera Culex, Culiseta, and Ochlerotatus have diverged separately.

  6. Artificial activation of mature unfertilized eggs in the malaria vector mosquito, Anopheles stephensi (Diptera, Culicidae).

    Science.gov (United States)

    Yamamoto, Daisuke S; Hatakeyama, Masatsugu; Matsuoka, Hiroyuki

    2013-08-01

    In the past decade, many transgenic lines of mosquitoes have been generated and analyzed, whereas the maintenance of a large number of transgenic lines requires a great deal of effort and cost. In vitro fertilization by an injection of cryopreserved sperm into eggs has been proven to be effective for the maintenance of strains in mammals. The technique of artificial egg activation is a prerequisite for the establishment of in vitro fertilization by sperm injection. We demonstrated that artificial egg activation is feasible in the malaria vector mosquito, Anopheles stephensi (Diptera, Culicidae). Nearly 100% of eggs dissected from virgin females immersed in distilled water darkened, similar to normally oviposited fertilized eggs. It was revealed by the cytological examination of chromosomes that meiotic arrest was relieved in these eggs approximately 20 min after incubation in water. Biochemical examinations revealed that MAPK (mitogen-activated protein kinase)/ERK (extracellular signal-regulated protein kinase) and MEK (MAPK/ERK kinase) were dephosphorylated similar to that in fertilized eggs. These results indicate that dissected unfertilized eggs were activated in distilled water and started development. Injection of distilled water into body cavity of the virgin blood-fed females also induced activation of a portion of eggs in the ovaries. The technique of artificial egg activation is expected to contribute to the success of in vitro fertilization in A. stephensi.

  7. Aedes aegypti survival in the presence of Toxorhynchites violaceus (Diptera: Culicidae fourth instar larvae

    Directory of Open Access Journals (Sweden)

    Daniel S Albeny

    2011-08-01

    Full Text Available The mosquito Aedes aegypti (Linnaeus, 1762 is the main vector of dengue and yellow fever viruses. Different methods have been used to control A. aegypti, including chemical and biological tools. However, chemical control can lead to a subsequent increase in the mosquitoes' insecticide resistance, and biological control represents an important method as an alternative to insecticide usage. Larvae from the Toxorhynchites genus (Diptera: Culicidae are predators of other mosquitoes and represent a potential natural biocontrol agent of A. aegypti larvae. In the present work, A. aegypti larval survival was studied in the presence of the neotropical Toxorhynchites violaceus (Wiedemann, 1821 fourth instar larvae. Toxorhynchites violaceus consumption of A. aegypti increased during the 192 hours of the experiment and was more marked in the intervals between 96 and 120 hours and between 168 and 192 hours, when the A. aegypti survival reached 0%. During the fourth instar, T. violaceus increased its predation on A. aegypti larvae, possibly in order to increase its nutrient storage prior to pupation. Otherwise, low prey consumption can lead to a nutritional deficit for the larvae, delaying the adult's sexual development and reducing its egg production. Here we show that A. aegypti survival can be reduced by the T. violaceus fourth larvae predation under laboratory conditions

  8. Sampling outdoor, resting Anopheles gambiae and other mosquitoes (Diptera: Culicidae) in western Kenya with clay pots.

    Science.gov (United States)

    Odiere, M; Bayoh, M N; Gimnig, J; Vulule, J; Irungu, L; Walker, E

    2007-01-01

    Clay pots were analyzed as devices for sampling the outdoor resting fraction of Anopheles gambiae Giles (Diptera: Culicidae) and other mosquito species in a rural, western Kenya. Clay pots (Anopheles gambiae resting pots, herein AgREPOTs), outdoor pit shelters, indoor pyrethrum spray collections (PSC), and Colombian curtain exit traps were compared in collections done biweekly for nine intervals from April to June 2005 in 20 housing compounds. Of 10,517 mosquitoes sampled, 4,668 An. gambiae s.l. were sampled in total of which 63% were An. gambiae s.s. (46% female) and 37% were An. arabiensis (66% female). The clay pots were useful and practical for sampling both sexes of An. gambiae s.l. Additionally, 617 An. funestus (58% female) and 5,232 Culex spp. (males and females together) were collected. Temporal changes in abundance of An. gambiae s.l. were similarly revealed by all four sampling methods, indicating that the clay pots could be used as devices to quantify variation in mosquito population density. Dispersion patterns of the different species and sexes fit well the negative binomial distribution, indicating that the mosquitoes were aggregated in distribution. Aside from providing a useful sampling tool, the AgREPOT also may be useful as a delivery vehicle for insecticides or pathogens to males and females that enter and rest in them.

  9. Near-infrared spectroscopy and microstructure of the scales of Sabethes ( Sabethes albiprivus (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Betina Westphal-Ferreira

    Full Text Available ABSTRACT Near-infrared spectroscopy and microstructure of the scales of Sabethes (Sabethes albiprivus (Diptera: Culicidae. Sabethes (Sabethes albiprivus Theobald individuals vary considerably in size and color of the reflections of the scales on their thorax, abdomen, antepronotal lobes and occiput. The goal of this study was to investigate and to characterize the differences in the color of the scales among preserved specimens and to analyze the differences in the microstructures of the scales that cover their bodies using near-infrared spectroscopy, and to evaluate whether the latter is efficient in distinguishing the populations. A total of 201 adult females were analyzed for the characterization of color patterns. In addition, absorbance spectra and scanning electron microscope images were obtained from them. As a result of color analysis, two variations were identified, one represented by specimens with yellow or green scales and the other with blue or purple scales. The same two variations were corroborated using NIRS. Analysis of the microstructure of the scales lining the mesonotum, occiput and antepronotal lobes resulted in the same variations. The three methodologies, near-infrared spectroscopy, scanning electron microscopy and coloration of the reflections of the scales revealed two variations within Sa. albiprivus.

  10. [Mosquitoes (Diptera, Culicidae) and their medical importance for Portugal: challenges for the 21st century].

    Science.gov (United States)

    Gouveia de Almeida, A Paulo

    2011-01-01

    Mosquitoes are dipterous insects, responsible for the transmission of several pathogenic agents to humans, causing vector-borne diseases, such as malaria, lymphatic and other filariasis, and several arboviral diseases such as yellow fever and dengue. In this revision, Culicidae or mosquitoes are summarily characterized, as well as their bioecology, internal morphology, digestive and egg maturation physiology, and the main methods for their collection and control. The epidemiology of mosquito-borne diseases depends on parameters such as Vectorial efficiency, Vector competence and Vectorial capacity, the concepts of which are presented. Forty one species of mosquitoes have been detected so far in mainland Portugal. Malaria was endemic till 1959, yellow fever outbreaks were registered in the XIX century, and human cases of dirofilarisis and West Nile fever have been detected. In face of the current climate changes in course and the threat of the (re)-introduction of exotic mosquito species, not only new cases of some of these diseases may occur, increasing their risk, but also other mosquito-borne diseases may be introduced constituting challenges for the XXI century, demanding a continued surveillance in a Public Health perspective.

  11. Identification of person and quantification of human DNA recovered from mosquitoes (Culicidae).

    Science.gov (United States)

    Curic, Goran; Hercog, Rajna; Vrselja, Zvonimir; Wagner, Jasenka

    2014-01-01

    Mosquitoes (Culicidae) are widespread insects and can be important in forensic context as a source of human DNA. In order to establish the quantity of human DNA in mosquitoes' gut after different post-feeding interval and for how long after taking a bloodmeal the human donor could be identified, 174 blood-engorged mosquitoes (subfamily Anophelinae and Culicinae) were captured, kept alive and sacrificed at 8h intervals. Human DNA was amplified using forensic PCR kits (Identifiler, MiniFiler, and Quantifiler). A full DNA profiles were obtained from all Culicinae mosquitoes (74/74) up to 48 h and profiling was successful up to 88 h after a bloodmeal. Duration of post-feeding interval had a significant negative effect on the possibility of obtaining a full profile (pmosquitoes are a suitable source of human DNA for forensic STR kits more than three days after a bloodmeal. Human DNA recovered from mosquito can be used for matching purposes and could be useful in revealing spatial and temporal relation of events that took place at the crime scene. Therefore, mosquitoes at the crime scene, dead or alive, could be a valuable piece of forensic evidence.

  12. Online database for mosquito (Diptera, Culicidae) occurrence records in French Guiana.

    Science.gov (United States)

    Talaga, Stanislas; Murienne, Jérôme; Dejean, Alain; Leroy, Céline

    2015-01-01

    A database providing information on mosquito specimens (Arthropoda: Diptera: Culicidae) collected in French Guiana is presented. Field collections were initiated in 2013 under the auspices of the CEnter for the study of Biodiversity in Amazonia (CEBA: http://www.labexceba.fr/en/). This study is part of an ongoing process aiming to understand the distribution of mosquitoes, including vector species, across French Guiana. Occurrences are recorded after each collecting trip in a database managed by the laboratory Evolution et Diversité Biologique (EDB), Toulouse, France. The dataset is updated monthly and is available online. Voucher specimens and their associated DNA are stored at the laboratory Ecologie des Forêts de Guyane (Ecofog), Kourou, French Guiana. The latest version of the dataset is accessible through EDB's Integrated Publication Toolkit at http://130.120.204.55:8080/ipt/resource.do?r=mosquitoes_of_french_guiana or through the Global Biodiversity Information Facility data portal at http://www.gbif.org/dataset/5a8aa2ad-261c-4f61-a98e-26dd752fe1c5 It can also be viewed through the Guyanensis platform at http://guyanensis.ups-tlse.fr.

  13. Laboratory and field evaluation of an oviposition trap for Culex quinquefasciatus(Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Rosângela MR Barbosa

    2007-06-01

    Full Text Available An ovitrap (BR-OVT based on physical and chemical stimuli for attracting gravid Culex quinquefasciatus (Diptera: Culicidae females was developed and evaluated under laboratory and field conditions. Attractants were assayed using alternative chamber bioassays prior to being used in the BR-OVT oviposition trap. A significant preference of gravid females for sites containing conspecific egg rafts was observed, as a response to the natural oviposition pheromone, as well as for sites treated with the synthetic pheromone erythro-6-acetoxy-5-hexadecanolide. Five- to 20-day old grass infusion was strongly attractive to gravid females for laying eggs. On the other hand, entomopathogenic Bacillus sphaericus (Bs did not influence the choice of an oviposition site when used in combination with grass infusion and can therefore be used as a larvicide in ovitraps. Results from field trials showed that the BR-OVT with grass infusion and with or without Bs works as a preferred oviposition site for Cx. quinquefasciatus. The BR-OVT was more effective for egg collection when placed indoors and comparison with the number of egg rafts laid in cesspits over 40 days indicates that this very simple ovitrap may be a useful tool for monitoring populations of the most important of the vectors of bancroftian filariasis.

  14. Worthy of their name: how floods drive outbreaks of two major floodwater mosquitoes (Diptera: Culicidae).

    Science.gov (United States)

    Berec, Ludĕk; Gelbic, Ivan; Sebesta, Oldrich

    2014-01-01

    An understanding of how climate variables drive seasonal dynamics of mosquito populations is critical to mitigating negative impacts of potential outbreaks, including both nuisance effects and risk of mosquito-borne infectious disease. Here, we identify climate variables most affecting seasonal dynamics of two major floodwater mosquitoes, Aedes vexans (Meigen, 1830) and Aedes sticticus (Meigen, 1838) (Diptera: Culicidae), along the lower courses of the Dyje River, at the border between the Czech Republic and Austria. Monthly trap counts of both floodwater mosquitoes varied both across sites and years. Despite this variability, both models used to fit the observed data at all sites (and especially that for Ae. sticticus) and site-specific models fitted the observed data quite well. The most important climate variables we identified-temperature and especially flooding-were driving seasonal dynamics of both Aedes species. We suggest that flooding determines seasonal peaks in the monthly mosquito trap counts while temperature modulates seasonality in these counts. Hence, floodwater mosquitoes indeed appear worthy of their name. Moreover, the climate variables we considered for modeling were able reasonably to predict mosquito trap counts in the month ahead. Our study can help in planning flood management; timely notification of people, given that these mosquitoes are a real nuisance in this region; public health policy management to mitigate risk from such mosquito-borne diseases as that caused in humans by the Tahyna virus; and anticipating negative consequences of climate change, which are expected only to worsen unless floods, or the mosquitoes themselves, are satisfactorily managed.

  15. Larvicidal and Cytotoxic Potential of Squamocin on the Midgut of Aedes aegypti (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Marilza S. Costa

    2014-03-01

    Full Text Available Acetogenins are secondary metabolites exclusively produced by Annonaceae, which have antitumor, cytotoxic, and pesticide activities. In this study, we evaluated the larvicidal and cytotoxic effect of squamocin from Annona squamosa on Aedes aegypti (Diptera: Culicidae midgut. The compound was solubilized in 2% Tween 20 at 10, 20, 50, 80 and 100 ppm. The assay was conducted in a completely randomized design with four replications, each with 20 third-instar larvae. Larval mortality was assessed every hour until total mortality, and the data were subjected to Probit analysis. Cellular damage was evaluated every 30 min in groups comprising five larvae subjected to squamocin at 50 and 100 ppm for 240 min. The total larval mortality occurred after 360 min following application of 50, 80, and 100 ppm squamocin, and 600 min after applying other concentrations with LC50 at 6.4 ppm. Both 50 and 100 ppm of squamocin showed cytotoxic activity in the midgut epithelium of A. aegypti after 240 min with 50 ppm resulting in midgut cells with light cytoplasm containing small vacuoles, whereas at 100 ppm were found cells with cytoplasm highly vacuolated, damaged apical surface and cell protrusion toward the gut lumen. In conclusion, squamocin has the potential to control A. aegypti.

  16. Larvicidal Effects of Four Citrus Peel Essential Oils Against the Arbovirus Vector Aedes albopictus (Diptera: Culicidae).

    Science.gov (United States)

    Campolo, Orlando; Romeo, Flora V; Algeri, Giuseppe M; Laudani, Francesca; Malacrinò, Antonino; Timpanaro, Nicolina; Palmeri, Vincenzo

    2016-02-01

    In this study, we evaluated the larvicidal activity of four citrus essential oils (EOs; sweet orange, mandarin, bergamot, and lemon) against the arbovirus vector Aedes albopictus (Skuse) (Diptera: Culicidae) under laboratory conditions. Through gas chromatography-mass spectrometry (GC-MS) analyses, we found that in sweet orange, mandarin, and lemon EOs, limonene was the most abundant compound, whereas linalyl acetate was the most abundant in the bergamot EO. All tested EOs showed a marked larvicidal activity, in particular sweet orange, lemon, and bergamot that killed all treated larvae. After 24 h of exposure, the LC50 values of the tested citrus EOs ranged from 145.27 (lemon EO) to 318.07 mg liter(-1) (mandarin EO), while LC(95) ranged from 295.13 to 832.44 mg liter(-1). After 48 h of exposure, the estimated LC(50) values decreased to values ranging from 117.29 to 209.38 mg liter(-1), while LC(95) ranged from 231.85 to 537.36 mg liter(-1). The results obtained from these evaluations, together with the large availability at reasonable costs of citrus EOs, are promising for the potential development of a new botanical mosquitocide. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  17. Mosquito Records from Mexico: The Mosquitoes (Diptera: Culicidae) of Tamaulipas State.

    Science.gov (United States)

    Ortega-Morales, Aldo I; Zavortink, Thomas J; Huerta-Jiménez, Herón; Sánchez-Rámos, Francisco J; Valdés-Perezgasga, Ma Teresa; Reyes-Villanueva, Filiberto; Siller-Rodríguez, Quetzaly K; Fernandez-Salas, Ildefonso

    2015-03-01

    To document the diversity and distribution of mosquito species inhabiting the Mexican state of Tamaulipas, collection trips were conducted to all physiographic regions (Grand Northamerican Plains, Coastal Plain of North Gulf, and Sierra Madre Oriental) and subregions across the state. Additionally, we re-examined mosquito specimens in two Mexican entomological collections: the Collection of Insects and Mites of Medical Importance and the Collection of Arthropods of Medical Importance. In total, 3,931 specimens were collected. These represent the two Culicidae subfamilies Anophelinae and Culicinae, 10 tribes, 17 genera, 27 subgenera, 80 named species, and 2 undescribed species. Of these, 3 tribes, 6 genera, 7 subgenera, and 20 species are new records for the mosquito fauna of Tamaulipas. Fourteen species recorded in the historical records were not found in collections made for this study. Taxonomic notes, new distribution limits, and comments about the medical importance of some of the species collected are reported. © The Author 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  18. Mosquito (Diptera: Culicidae) diversity of a forest-fragment mosaic in the Amazon rain forest.

    Science.gov (United States)

    Hutchings, Rosa Sá Gomes; Sallum, Maria Anice Mureb; Hutchings, Roger William

    2011-03-01

    To study the impact of Amazonian forest fragmentation on the mosquito fauna, an inventory of Culicidae was conducted in the upland forest research areas of the Biological Dynamics of Forest Fragments Project located 60 km north of Manaus, Amazonas, Brazil. The culicid community was sampled monthly between February 2002 and May 2003. CDC light traps, flight interception traps, manual aspiration, and net sweeping were used to capture adult specimens along the edges and within forest fragments of different sizes (1, 10, and 100 ha), in second-growth areas surrounding the fragments and around camps. We collected 5,204 specimens, distributed in 18 genera and 160 species level taxa. A list of mosquito taxa is presented with 145 species found in the survey, including seven new records for Brazil, 16 new records for the state of Amazonas, along with the 15 morphotypes that probably represent undescribed species. No exotic species [Aedes aegypti (L.) and Aedes albopictus (Skuse)] were found within the sampled areas. Several species collected are potential vectors of Plasmodium causing human malaria and of various arboviruses. The epidemiological and ecological implications of mosquito species found are discussed, and the results are compared with other mosquito inventories from the Amazon region.

  19. Phenotypic plasticity, costs of phenotypes, and costs of plasticity

    DEFF Research Database (Denmark)

    Callahan, Hilary S; Maughan, Heather; Steiner, Uli

    2008-01-01

    Why are some traits constitutive and others inducible? The term costs often appears in work addressing this issue but may be ambiguously defined. This review distinguishes two conceptually distinct types of costs: phenotypic costs and plasticity costs. Phenotypic costs are assessed from patterns...... of covariation, typically between a focal trait and a separate trait relevant to fitness. Plasticity costs, separable from phenotypic costs, are gauged by comparing the fitness of genotypes with equivalent phenotypes within two environments but differing in plasticity and fitness. Subtleties associated with both...... types of costs are illustrated by a body of work addressing predator-induced plasticity. Such subtleties, and potential interplay between the two types of costs, have also been addressed, often in studies involving genetic model organisms. In some instances, investigators have pinpointed the mechanistic...

  20. Biodegradable plastics from renewable sources.

    Science.gov (United States)

    Flieger, M; Kantorová, M; Prell, A; Rezanka, T; Votruba, J

    2003-01-01

    Plastic waste disposal is a huge ecotechnological problem and one of the approaches to solving this problem is the development of biodegradable plastics. This review summarizes data on their use, biodegradability, commercial reliability and production from renewable resources. Some commercially successful biodegradable plastics are based on chemical synthesis (i.e. polyglycolic acid, polylactic acid, polycaprolactone, and polyvinyl alcohol). Others are products of microbial fermentations (i.e. polyesters and neutral polysaccharides) or are prepared from chemically modified natural products (e.g., starch, cellulose, chitin or soy protein).

  1. Plastics recycling: challenges and opportunities

    OpenAIRE

    Hopewell, Jefferson; Dvorak, Robert; Kosior, Edward

    2009-01-01

    Plastics are inexpensive, lightweight and durable materials, which can readily be moulded into a variety of products that find use in a wide range of applications. As a consequence, the production of plastics has increased markedly over the last 60 years. However, current levels of their usage and disposal generate several environmental problems. Around 4 per cent of world oil and gas production, a non-renewable resource, is used as feedstock for plastics and a further 3–4% is expended to pro...

  2. Circadian Regulation of Synaptic Plasticity

    Directory of Open Access Journals (Sweden)

    Marcos G. Frank

    2016-07-01

    Full Text Available Circadian rhythms refer to oscillations in biological processes with a period of approximately 24 h. In addition to the sleep/wake cycle, there are circadian rhythms in metabolism, body temperature, hormone output, organ function and gene expression. There is also evidence of circadian rhythms in synaptic plasticity, in some cases driven by a master central clock and in other cases by peripheral clocks. In this article, I review the evidence for circadian influences on synaptic plasticity. I also discuss ways to disentangle the effects of brain state and rhythms on synaptic plasticity.

  3. PLASMA GASIFICATION OF WASTE PLASTICS

    Directory of Open Access Journals (Sweden)

    Tadeusz Mączka

    2013-01-01

    Full Text Available The article presents the process of obtaining liquid fuels and fuel gas in the process of plasma processing of organic materials, including waste plastics. The concept of plasma pyrolysis of plastics was presented and on its basis a prototype installation was developed. The article describes a general rule of operating the installation and its elements in the process and basic operation parameters determined during its start-up. Initial results of processing plastics and the directions further investigations are also discussed. The effect of the research is to be the design of effective technology of obtaining fuels from gasification/pyrolysis of organic waste and biomass.

  4. Atividade de Culicidae em remanescente florestal na região urbana de Curitiba (Paraná, Brasil

    Directory of Open Access Journals (Sweden)

    Barbosa Andréia Aparecida

    2003-01-01

    Full Text Available Vegetation islands inside urban area can propitiate the formation of: a adults refuge to many mosquitoes species, b diversity of hosters, c allows the proliferation of immature stages through naturals and artificial breeding, these ones were done by the interaction between antropic activity developed in these spaces or around areas. Considering the possibilities of contacts between the vector and the human population, the aim of this work was to verify the Culicidae species that can use man as blood source in the restricted areas of Botanical Garden, Curitiba. The capture of adults using the method of human bait at soil level, inside the forest, monthly during the period of October 13th 1998 to September 22nd 1999, from 5:00 p.m. to 8:00 p.m. 312 Culicidae specimens were captured, and 15 species were found. The predomiant species belong to Culex (Culex coronator Dyar & Knab, 1906 group. Others species found with potential epidemiological importance were: Haemagogus (Conopostegus leucocelaenus (Dyar & Shannon, 1924, Ochlerotatus (Ochlerotatus fluviatilis (Lutz, 1904 e Anopheles (Nyssorhynchus strodei Root, 1926.

  5. Observations on the predatory potential of Lutzia fuscana on Aedes aegypti larvae: implications for biological control (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Soujita Pramanik

    2016-12-01

    Full Text Available Among the natural predators, larval stages of the mosquito Lutzia fuscana (Wiedemann, 1820 (Diptera: Culicidae bear potential as a biological control agent of mosquitoes. An estimation of the predatory potential of the larva of L. fuscana against the larva of the dengue vector Aedes aegypti (Linnaeus, 1762 (Diptera: Culicidae was made to highlight its use in vector management. Laboratory experiments revealed that the larva of L. fuscana consumes 19 to 24 A. aegypti larvae per day, during its tenure as IV instar larva. The consumption of A. aegypti larvae was proportionate to the body length (BL and body weight (BW of the predatory larva L. fuscana as depicted through the logistic regressions: y = 1 / (1 + exp(-(-2.09 + 0.35*BL and y = 1 / (1 + exp(-(0.4+ 0.06*BW. While the prey consumption remained comparable among the days, the net weight gained by the L. fuscana larva showed a decreasing trend with the age. On the basis of the results, it is apparent that the larva of the mosquito L. fuscana can be used in the regulation of the mosquito A. aegypti through augmentative release, particularly, in the smaller mosquito larval habitats.

  6. [A new technique for the study of thoracic sclerites of mosquitoes (Diptera, Culicidae) allowing correct identification of genera and species].

    Science.gov (United States)

    Khalin, A V; Aĭbulatov, S V

    2012-01-01

    A new technique for the study of the external morphology of thoracic sclerites of mosquitoes (Diptera: Culicidae) is elaborated. According to this method, the shape of sclerites and the location of setal and scale bases can be examined under a scanning electron or an optical microscopes even in cases when setae or scales are lost. The method can be recommended for the damaged material, as it often happens while sample collecting. The bases of setae differ significantly from those of scales in the size of the orifice in the socket. The diameter of setal bases usually exceeds 100 microns, while the diameter of scale bases is about 30 microns. The analysis of the structure of sclerites (and the disposition of setae and scales on the sclerites) taken from the different specimens of one species will allow describing intraspecific variations of the given complex of morphological characters. The comparison of species from different genera of family Culicidae, as well as the comparison of closely related species, will presumably help evaluating the diagnostic value of thoracic sclerites as morphological characters.

  7. Recycling of Reinforced Plastics

    Science.gov (United States)

    Adams, R. D.; Collins, Andrew; Cooper, Duncan; Wingfield-Digby, Mark; Watts-Farmer, Archibald; Laurence, Anna; Patel, Kayur; Stevens, Mark; Watkins, Rhodri

    2014-02-01

    This work has shown is that it is possible to recycle continuous and short fibre reinforced thermosetting resins while keeping almost the whole of the original material, both fibres and matrix, within the recyclate. By splitting, crushing hot or cold, and hot forming, it is possible to create a recyclable material, which we designate a Remat, which can then be used to remanufacture other shapes, examples of plates and tubes being demonstrated. Not only can remanufacturing be done, but it has been shown that over 50 % of the original mechanical properties, such as the E modulus, tensile strength, and interlaminar shear strength, can be retained. Four different forms of composite were investigated, a random mat Glass Fibre Reinforced Plastic (GFRP) bathroom component and boat hull, woven glass and carbon fibre cloth impregnated with an epoxy resin, and unidirectional carbon fibre pre-preg. One of the main factors found to affect composite recyclability was the type of resin matrix used in the composite. Thermoset resins tested were shown to have a temperature range around the Glass Transition Temperature (Tg) where they exhibit ductile behaviour, hence aiding reforming of the material. The high-grade carbon fibre prepreg was found to be less easy to recycle than the woven of random fibre laminates. One method of remanufacturing was by heating the Remat to above its glass transition temperature, bending it to shape, and then cooling it. However, unless precautions are taken, the geometric form may revert. This does not happen with the crushed material.

  8. Theory of Lattice Strain for Materials Undergoing Plastic Deformation

    Science.gov (United States)

    Karato, S.

    2008-12-01

    Radial x-ray diffraction is used to probe physical properties of materials including elastic and plastic properties. The theory used behind such an practice is the one developed by Singh (1993) in which the relation between lattice strain and elastic constants and macroscopic stress is derived. In this theory, the variation of inferred stress with the crystallographic planes, (hkl), is due to the elastic anisotropy. However, recent experimental studies showed that in many cases, the variation of stress with (hkl) far exceeds the value expected from this theory. I have developed a modified theory to rectify this problem with Singh's theory. In Singh's theory, the stress distribution in a polycrystalline material is treated only either unrelaxed or relaxed state. The role of plastic deformation is included only to the extent that plastic flow influences this stress state. Such an assumption corresponds to a Voigt model behavior, which is not an appropriate model at high temperatures where continuing plastic flow occurs with concurrent microscopic equilibrium, elastic deformation. This is a Maxwell model type behavior, and my model provides a stress analysis in a Maxwell material with anisotropic and non-linear power-law rheology. In this theory, the lattice strain corresponding to an imposed macroscopic strain-rate is calculated by three steps: (i) conversion of macroscopic strain-rate to macroscopic stress, (ii) conversion of macroscopic stress to microscopic stress at individual grains, and (iii) calculation of microscopic strain due to microscopic stress. The first step involves anisotropy in macroscopic viscosity that depends on anisotropy in crystal plasticity and lattice-preferred orientation. The second step involves anisotropic crystal plasticity and finally the third step involves elastic crystal anisotropy. In most cases, the influence of LPO is weak and in such a case, the lattice strain depends on (hkl) due to the anisotropy in both elastic and plastic

  9. The type III manufactory

    CERN Document Server

    Palcoux, Sébastien

    2011-01-01

    Using unusual objects in the theory of von Neumann algebra, as the chinese game Go or the Conway game of life (generalized on finitely presented groups), we are able to build, by hands, many type III factors.

  10. Plasticity and creep of metals

    CERN Document Server

    Rusinko, Andrew

    2011-01-01

    Here is a systematic presentation of the postulates, theorems and principles of mathematical theories of plasticity and creep in metals, and their applications. Special attention is paid to analysis of the advantages and shortcomings of the classical theories.

  11. American Society of Plastic Surgeons

    Science.gov (United States)

    ... PRS PRS GO PSN PSEN GRAFT Contact Us Cosmetic Surgery New procedures and advanced technologies offer plastic surgery ... David Berman MD 14 Pidgeon Hill Drive Berman Cosmetic Surgery & S... Sterling, VA 20165 Website Franklin Richards MD Suite ...

  12. Plastic deformation of nanocrystalline nickel

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    A high-resolution electron microscopy study has uncovered the plastic behavior of accommodating large strains in nanocrystalline (NC) Ni subject to cold rolling at liquid nitrogen temperature. The activation of grain-boundary-mediated-plasticity is evidenced in NC-Ni, including twinning and formation of stacking fault via partial dislocation slips from the grain boundary. The formation and storage of 60? full dislocations are observed inside NC-grains. The grain/twin boundaries act as the barriers of dislocation slips, leading to dislocation pile-up, severe lattice distortion, and formation of sub-grain boundary. The vicinity of grain/twin boundary is where defects preferentially accumulate and likely the favorable place for onset of plastic deformation. The present results indicate the heterogeneous and multiple natures of accommodating plastic strains in NC-grains.

  13. Plastic deformation of nanocrystalline nickel

    Institute of Scientific and Technical Information of China (English)

    WU XiaoLei

    2009-01-01

    A high-resolution electron microscopy study has uncovered the plastic behavior of accommodating large strains in nanocrystalline(NC)Ni subject to cold rolling at liquid nitrogen temperature.The acti vation of grain-boundary-mediated-plasticity is evidenced in NC-Ni,including twinning and formation of stacking fault via partial dislocation slips from the grain boundary.The formation and storage of 60° full dislocations are observed inside NC-grains.The grain/twin boundaries act as the barriers of dislocation slips,leading to dislocation pile-up,severe lattice distortion,and formation of sub-grain boundary.The vicinity of grain/twin boundary is where defects preferentially accumulate and likely the favorable place for onset of plastic deformation.The present results indicate the heterogeneous and multiple natures of accommodating plastic strains in NC-grains.

  14. Exceptional plasticity of silicon nanobridges

    Energy Technology Data Exchange (ETDEWEB)

    Ishida, Tadashi; Sato, Takaaki; Toshiyoshi, Hiroshi; Collard, Dominique; Fujita, Hiroyuki [University of Tokyo, Institute of Industrial Science, 4-6-1 Komaba Meguro, Tokyo 153-8505 (Japan); Cleri, Fabrizio [Institut d' Electronique Microelectronique et Nanotechnologie (CNRS UMR 8520), Universite de Lille I, Avenue Poincare BP60069 59652 Villeneuve d' Ascq (France); Kakushima, Kuniyuki [Tokyo Institute of Technology, 4259, Nagatsuda, Midori, Yokohama, Kanagawa 226-8502 (Japan); Mita, Makoto [Department of Spacecraft Engineering, Japan Aerospace Exploration Agency, 3-1-1, Yoshinodai, Sagamihara, Kanagawa 229-8510 (Japan); Miyata, Masaki; Itamura, Noriaki; Sasaki, Naruo [Department of Materials and Life Sciences, Seikei University, 3-3-1, Kitamachi, Kichijoji, Musashino, Tokyo 180-8633 (Japan); Endo, Junji, E-mail: tadashii@iis.u-tokyo.ac.jp [FK Optical laboratory, 1-13-4 Nakano Niiza Saitama, 352-0005 (Japan)

    2011-09-02

    The plasticity of covalently bonded materials is a subject at the forefront of materials science, bearing on a wide range of technological and fundamental aspects. However, covalent materials fracture in a brittle manner when the deformation exceeds just a few per cent. It is predicted that a macroscopically brittle material like silicon can show nanoscale plasticity. Here we report the exceptional plasticity observed in silicon nanocontacts ('nanobridges') at room temperature using a special experimental setup combining a transmission electron microscope and a microelectromechanical system. When accounting for surface diffusion, we succeeded in elongating the nanocontact into a wire-like structure, with a fivefold increase in volume, up to more than twenty times the original length. Such a large plasticity was caused by the stress-assisted diffusion and the sliding of the intergranular, amorphous-like material among the nanocrystals.

  15. Globally Oriented Chinese Plastics Industry

    Institute of Scientific and Technical Information of China (English)

    Liao Zhengpin

    2004-01-01

    @@ Through continued endeavor and persistent opening to the whole world the Chinese plastics industry has been developed into a comprehensive industrial system that forms the basic material industries side by side with the steel, cement and the timber industry.

  16. Especificidade da armadilha Adultrap para capturar fêmeas de Aedes aegypti (Diptera: Culicidae Specificity of the Adultrap for capturing females of Aedes aegypti (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Almério de Castro Gomes

    2007-04-01

    Full Text Available A Adultrap é uma nova armadilha feita para capturar fêmeas de Aedes aegypti. Foram realizados testes para avaliar sua especificidade tendo como referência a técnica da aspiração da espécie em abrigos artificiais. A Adultrap ficou exposta por 24 horas no intradomicílio e peridomicílio de 120 casas sorteadas em dois bairros da Cidade de Foz do Iguaçu, Estado do Paraná. O teste estatístico foi o modelo log-linear de Poisson. O resultado foi a captura de 726 mosquitos Culicidae, dos quais 80 eram Aedes aegypti. A Adultrap capturou apenas fêmeas desta espécie, enquanto o aspirador os dois sexos de Aedes aegypti e mais cinco outras espécies. A Adultrap capturou Aedes aegypti dentro e fora das casas, mas a análise indicou que no peridomicílio a armadilha capturou significantemente mais fêmeas do que a aspiração. Também, ficou evidenciada a sensibilidade da Adultrap para detectar Aedes aegypti em situação de baixa freqüência.The Adultrap is a new trap built for capturing females of Aedes aegypti. Tests were carried out to evaluate the specificity of this trap in comparison with the technique of aspiration of specimens in artificial shelters. Adultraps were kept for 24 hours inside and outside 120 randomly selected homes in two districts of the city of Foz do Iguaçú, State of Paraná. The statistical test was Poisson’s log-linear model. The result was 726 mosquitoes captured, of which 80 were Aedes aegypti. The Adultrap captured only females of this species, while the aspiration method captured both sexes of Aedes aegypti and another five species. The Adultrap captured Aedes aegypti inside and outside the homes, but the analysis indicated that, outside the homes, this trap captured significantly more females than aspiration did. The sensitivity of the Adultrap for detecting females of Aedes aegypti in low-frequency situations was also demonstrated.

  17. Computational materials science: Nanoscale plasticity

    DEFF Research Database (Denmark)

    Jacobsen, Karsten Wedel; Schiøtz, Jakob

    2002-01-01

    How does plastic deformation of polycrystalline materials with grain sizes less than 100 nm look at the atomic scale? A large-scale molecular dynamics simulation of nanocrystalline alluminium reveals some surprising behaviour.......How does plastic deformation of polycrystalline materials with grain sizes less than 100 nm look at the atomic scale? A large-scale molecular dynamics simulation of nanocrystalline alluminium reveals some surprising behaviour....

  18. Sorting Techniques for Plastics Recycling

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    This paper presents the basic principles of three different types of separating methods and a general guideline for choosing the most effective method for sorting plastic mixtures. It also presents the results of the tests carried out for separation of PVC, ABS and PET from different kinds of plastic mixtures in order to improve the grade of the raw input used in mechanical or feedstock recycling.

  19. [Modern neuroimaging of brain plasticity].

    Science.gov (United States)

    Kasprian, G; Seidel, S

    2010-02-01

    Modern neuroimaging methods offer new insights into the plasticity of the human brain. As the techniques of functional MRI and diffusion tensor imaging are increasingly being applied in a clinical setting, the examiner is now frequently confronted with the interpretation of imaging findings related to regenerative processes in response to lesions of the central and also of the peripheral nervous system. In this article individual results of modern neuroimaging studies are discussed in the context of structural and functional plasticity of the CNS.

  20. Plastic bronchitis: a management challenge.

    Science.gov (United States)

    Eberlein, Michael H; Drummond, Michael B; Haponik, Edward F

    2008-02-01

    Plastic bronchitis is an uncommon and underdiagnosed entity, characterized by recurrent expectoration of large, branching bronchial casts. We describe a 39-year-woman with no prior lung disease who had episodic wheezing, severe dyspnea with expectoration of large and thick secretions, branching in appearance, which she described as resembling squid. A comprehensive evaluation revealed no specific cause and a diagnosis of idiopathic plastic bronchitis was made. In plastic bronchitis the bronchial casts may vary in size from small segmental casts of a bronchus to casts filling the airways of an entire lung. Plastic bronchitis can therefore present as an acute life-threatening emergency if mechanical obstruction of major airways occurs. The casts are differentiated into type I, inflammatory casts, or type II, acellular casts. The type I inflammatory casts are often associated with bronchial disease and often have an acute presentation. The acellular type of cast production is often chronic or recurrent. Numerous systemic illnesses are associated with plastic bronchitis, but often, as in our patient, no underlying cause can be identified. The treatment of plastic bronchitis includes acute therapy to aid the removal and expectoration of casts, and specific short- or long-term treatments attempting to address the underlying hypersecretory process. The therapeutic options are supported only by anecdotal evidence based on case reports as the rarity and heterogeneity of plastic bronchitis confounds systematic investigations of its treatment. Improved understanding of the regulation of mucus production may allow for new treatment options in plastic bronchitis and other chronic lung diseases characterized by hypersecretion of mucus.

  1. ARE PLASTIC GROCERY BAGS SACKING THE ENVIRONMENT?

    OpenAIRE

    Mangal Gogte

    2009-01-01

    This paper is oriented on analysis impacts of plastic bags on environment. In this paper is analyzed did plastic bags are so harmful, and what are the main ingredients of it. One part of this paper is oriented on effects of plastic bags and management of their usage. There is also made comparative analysis between impacts of plastic and paper bags on environment.

  2. Experiments with elasto-plastic oscillator

    DEFF Research Database (Denmark)

    Randrup-thomsen, Søren; Ditlevsen, Ove Dalager

    1996-01-01

    Plastic displacements of a Gaussian white noise excited three degrees of freedom non-ideal elasto-plastic oscillator are measured in laboratory experiments and the plastic displacements are compared to computer simulated results for the corresponding ideal elasto-plastic oscillator. The comparative...

  3. Experiments with elasto-plastic oscillator

    DEFF Research Database (Denmark)

    Randrup-Thomsen, S.; Ditlevsen, Ove Dalager

    1999-01-01

    Plastic displacements of a Gaussian white noise excited three degrees of freedom non-ideal elasto-plastic oscillator are measured in laboratory experiments and the plastic displacements are compared to computer simulated results for the corresponding ideal elasto-plastic oscillator. The comparative...

  4. 49 CFR 192.281 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.281 Section 192.281... Plastic pipe. (a) General. A plastic pipe joint that is joined by solvent cement, adhesive, or heat fusion may not be disturbed until it has properly set. Plastic pipe may not be joined by a threaded joint...

  5. 49 CFR 192.59 - Plastic pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Plastic pipe. 192.59 Section 192.59 Transportation... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Materials § 192.59 Plastic pipe. (a) New plastic pipe... specification; and (2) It is resistant to chemicals with which contact may be anticipated. (b) Used plastic...

  6. The Story of the Plastics Industry.

    Science.gov (United States)

    Masson, Don, Ed.

    This is an illustrated informative booklet, designed to serve members of the Society of the Plastics Industry, Inc., and the plastics industry as a whole. It provides basic information about the industry's history and growth, plastics raw materials, typical uses of plastics, properties, and methods of processing and fabricating. (Author/DS)

  7. Study of Cobalt(III) Corrole as the Neutral Ionophore for Nitrite and Nitrate Detection via Polymeric Membrane Electrodes.

    Science.gov (United States)

    Yang, Si; Meyerhoff, Mark E

    2013-12-01

    Cobalt(III) 5, 10, 15-tris(4-tert-butylphenyl) corrole was synthesized and incorporated into plasticized poly(vinyl chloride) membranes and studied as a neutral carrier ionophore via potentiometry. This cobalt(III) complex has binding affinity to nitrite, and the resulting membrane electrode yields reversible and Nernstian response toward nitrite. Enhanced nitrite selectivity is observed over other anions, including lipophilic anions such as thiocyanate and perchlorate when an appropriate amount of lipophilic cationic sites are added to the membrane phase. Detection limit to nitrite is ca. 5 µM. Using tributylphosphate as the plasticizer with the cobalt(III) corrole species yields electrodes with enhanced nitrate selectivity.

  8. Deformation mechanisms of plasticized starch materials.

    Science.gov (United States)

    Mikus, P-Y; Alix, S; Soulestin, J; Lacrampe, M F; Krawczak, P; Coqueret, X; Dole, P

    2014-12-19

    The aim of this paper is to understand the influence of plasticizer and plasticizer amount on the mechanical and deformation behaviors of plasticized starch. Glycerol, sorbitol and mannitol have been used as plasticizers. After extrusion of the various samples, dynamic mechanical analyses and video-controlled tensile tests have been performed. It was found that the nature of plasticizer, its amount as well as the aging of the material has an impact on the involved deformation mechanism. The variations of volume deformation could be explained by an antiplasticization effect (low plasticizer amount), a phase-separation phenomenon (excess of plasticizer) and/or by the retrogradation of starch.

  9. Evolution of phenotypic plasticity in colonizing species.

    Science.gov (United States)

    Lande, Russell

    2015-05-01

    I elaborate an hypothesis to explain inconsistent empirical findings comparing phenotypic plasticity in colonizing populations or species with plasticity from their native or ancestral range. Quantitative genetic theory on the evolution of plasticity reveals that colonization of a novel environment can cause a transient increase in plasticity: a rapid initial increase in plasticity accelerates evolution of a new optimal phenotype, followed by slow genetic assimilation of the new phenotype and reduction of plasticity. An association of colonization with increased plasticity depends on the difference in the optimal phenotype between ancestral and colonized environments, the difference in mean, variance and predictability of the environment, the cost of plasticity, and the time elapsed since colonization. The relative importance of these parameters depends on whether a phenotypic character develops by one-shot plasticity to a constant adult phenotype or by labile plasticity involving continuous and reversible development throughout adult life. © 2014 John Wiley & Sons Ltd.

  10. Fauna de Culicidae em municípios da zona rural do estado do Amazonas, com incidência de febre amarela

    Directory of Open Access Journals (Sweden)

    Fé Nelson Ferreira

    2003-01-01

    Full Text Available Em 1996, foi realizado um levantamento da fauna de Culicidae (coleta de adultos e imaturos em cinco dos dez municípios onde foram registrados 14 casos de febre amarela silvestre (Rio Preto da Eva, Iranduba, Manacapuru, Manaquiri e Careiro. Os mosquitos foram coletados utilizando-se armadilhas de luz CDC, inspeções domiciliares e captura com tubos coletores para isca humana. Foram identificadas entre adultos e imaturos 36 espécies de Culicidae, entre estas, nove foram encontradas apenas na fase imatura. Dentre os adultos, coletou-se espécies de Haemagogus janthinomys, Ha. leucocelaenus e Aedes fulvus, incluídas entre os vetores de febre amarela silvestre.

  11. Protected areas in the Atlantic facing the hazards of micro-plastic pollution: first diagnosis of three islands in the Canary Current.

    Science.gov (United States)

    Baztan, Juan; Carrasco, Ana; Chouinard, Omer; Cleaud, Muriel; Gabaldon, Jesús E; Huck, Thierry; Jaffrès, Lionel; Jorgensen, Bethany; Miguelez, Aquilino; Paillard, Christine; Vanderlinden, Jean-Paul

    2014-03-15

    Coastal zones and the biosphere as a whole show signs of cumulative degradation due to the use and disposal of plastics. To better understand the manifestation of plastic pollution in the Atlantic Ocean, we partnered with local communities to determine the concentrations of micro-plastics in 125 beaches on three islands in the Canary Current: Lanzarote, La Graciosa, and Fuerteventura. We found that, in spite of being located in highly-protected natural areas, all beaches in our study area are exceedingly vulnerable to micro-plastic pollution, with pollution levels reaching concentrations greater than 100 g of plastic in 1l of sediment. This paper contributes to ongoing efforts to develop solutions to plastic pollution by addressing the questions: (i) Where does this pollution come from?; (ii) How much plastic pollution is in the world's oceans and coastal zones?; (iii) What are the consequences for the biosphere?; and (iv) What are possible solutions?

  12. A New Species of Culex (Eumelanomyia) from India with Descriptions of Pupae and Larvae of Cx. pluvialis Barraud and Cx. iphis Barraud (Diptera: Culicidae)

    Science.gov (United States)

    1977-01-01

    Barraud and Cx. <@is Barraud (Diptera: Culicidae)l Sunthorn Sirivanakarn 2 ABSTRACT. All known stages of CuZex Nilgiri Hills, Madras, India and the...specimens collected by Be N. Mohan in the Nilgiri Hills, Madras, India in 1974 and by Eb L. Peyton and Y,-M. Huang in Sri Lanka in 1975% These collec...of topotypic specimens of CUZSX in the Nilgiri Hills have been a valuable contribution to the taxonomic knowledge of several Indian species. The

  13. Field Responses of Anopheles gambiae Complex (Diptera: Culicidae) in Liberia using Yeast-Generated Carbon Dioxide and Synthetic Lure-Baited Light Traps

    Science.gov (United States)

    2013-07-01

    VECTOR-BORNE DISEASES, SURVEILLANCE, PREVENTION Field Responses of Anopheles gambiae Complex (Diptera: Culicidae) in Liberia using Yeast-Generated...and light, bed-net, tent, andodor-baited traps (Mboera 2005). TheCenters forDiseaseControl and Prevention (CDC) light trap with its typical 4Ð6 W...using paper- clips. Although primarily developed and used to attract day ßying Stegomyia ( Aedes ) mosquitoes, blends of this lureÕs primary ingredients

  14. The Mosquitoes of the Subgenus Culex in Southwestern Asia and Egypt (Diptera: Culicidae) (Contributions of the American Entomological Institute. Volume 24, Number 1, 1988)

    Science.gov (United States)

    1988-01-01

    Pathol. Exot. 53: 531-542. 1968. Contribution a I’etude des moustiques du Maroc (Diptera, Culicidae) six especes nouvelles pour le pays. Cah. ORSTOM...quelques moustiques du Maroc. Arch. inst. Pasteur Maroc 2: 361-365. 1957. Sur Culex torrentium Martini. Ann. Parasitol. Hum. Comp. 32: 438-442...De Grandpre, A.D. and D. D’E. De Charmoy 1900(1901). Les moustiques : anatomie et biologie. Contribution a I’etude des Culicides et principalement

  15. Exploring New Thermal Fog and Ultra-Low Volume Technologies to Improve Indoor Control of the Dengue Vector, Aedes aegypti (Diptera: Culicidae)

    Science.gov (United States)

    2014-07-01

    Dengue Vector, Aedes aegypti (Diptera: Culicidae) JAMES F. HARWOOD,1,2 MUHAMMAD FAROOQ,1 ALEC G. RICHARDSON,1 CARL W. DOUD,1 JOHN L. PUTNAM,3 DANIEL E...vector, Aedes aegypti (L.), inside human habitations must be performed quickly and efÞciently to reduce the risk of transmission during dengue...e.g.,WHO2009, Bhatt et al. 2013). Dengue is primarily transmitted by Aedes aegypti (L.) in urban endemic regions. Ae. aegypti , which is also a vector

  16. [Effect of several extracts derived from plants on the survival of larvae of Aedes fluviatilis (Lutz) (Diptera: Culicidae) in the laboratory].

    Science.gov (United States)

    Consoli, R A; Mendes, N M; Pereira, J P; Santos, B de S; Lamounier, M A

    1988-01-01

    The larvicidal properties of 34 plant extracts were tested against Aedes fluviatilis (Lutz) (Diptera: Culicidae) larvae, at 100, 10 and 1 ppm concentrations; 26.6% of the extracts enhanced larval mortality (alpha = 0.05) at 100 ppm (Anacardium occidentale, Agave americana, Allium sativum, Coriandrum sativum, Nerium oleander, Spatodea campanulata, Tibouchina scrobiculata and Vernonia salzmanni). Anacardic acid (A. occidentale) was effective at 10 ppm and A. sativum (crude extract) at 1 ppm.

  17. Wizlaw III og minnesangen

    DEFF Research Database (Denmark)

    Pontoppidan, Maria

    2012-01-01

    Artikel om den sidste slaviske Rügenfyrste, Wizlaw III (1265/68-1325), der traditionelt har været identificeret med minnesangeren Wizlaw den Unge. Om de bevarede sange og om minnesangens rolle ved det rügenske fyrstehof.......Artikel om den sidste slaviske Rügenfyrste, Wizlaw III (1265/68-1325), der traditionelt har været identificeret med minnesangeren Wizlaw den Unge. Om de bevarede sange og om minnesangens rolle ved det rügenske fyrstehof....

  18. III-V microelectronics

    CERN Document Server

    Nougier, JP

    1991-01-01

    As is well known, Silicon widely dominates the market of semiconductor devices and circuits, and in particular is well suited for Ultra Large Scale Integration processes. However, a number of III-V compound semiconductor devices and circuits have recently been built, and the contributions in this volume are devoted to those types of materials, which offer a number of interesting properties. Taking into account the great variety of problems encountered and of their mutual correlations when fabricating a circuit or even a device, most of the aspects of III-V microelectronics, from fundamental p

  19. Larval Habitats Diversity and Distribution of the Mosquito (Diptera: Culicidae) Species in the Republic of Moldova.

    Science.gov (United States)

    Sulesco, Tatiana M; Toderas, Lidia G; Uspenskaia, Inga G; Toderas, I K

    2015-11-01

    A countrywide field survey of immature mosquitoes was conducted in Moldova with the aim to evaluate the Culicidae species composition in different larval habitats and their distribution in the country. In total, 259 potential larval habitats were sampled in the 53 localities, resulting in 9,456 specimens. Twenty species belonging to the genera Anopheles, Aedes, Culex, Culiseta, and Uranotaenia were collected. Mean species richness in aquatic habitats ranged from 1.00 to 4.00, and, for example, was higher in swamps, flood plains, ditches, and large ground pools and lower in rivers, streams, tree-holes, and containers. Six mosquito species were identified only in a single type of aquatic habitat. Anopheles maculipennis s.l., Culex pipiens pipiens L., and Culex modestus Ficalbi were the most abundant and distributed species representing over 80% of the identified specimens. Three, four, and five associated species were recorded from 23.5% of mosquito-positive aquatic habitats. Our findings demonstrate the co-occurrence of Cx. p. pipiens and Culex torrentium Martini in natural and rural environments. It is concluded that the study area has undergone a dramatic ecological change since the previous studies in the 1950s, causing the near extinction of Culex theileri Theobald from Moldova. An. maculipennis s.l. larval abundance, reduced by the DDT control of the adults in the 1950s, had returned to those of the 1940s. Restoration of An. maculipennis s.l. abundance in combination with imported malaria cases constitute a risk of the reintroduction of malaria transmission in Moldova.

  20. Grass Pollen Affects Survival and Development of Larval Anopheles arabiensis (Diptera: Culicidae)

    Science.gov (United States)

    Asmare, Yelfwagash; Hopkins, Richard J; Tekie, Habte; Hill, Sharon R

    2017-01-01

    Abstract Nutrients in breeding sites are critical for the survival and development of malaria mosquitoes, having a direct impact on vectorial capacity. Yet, there is a limited understanding about the natural larval diet and its impact on the individual fitness of mosquitoes. Recent studies have shown that gravid Anopheles arabiensis Patton (Diptera: Culicidae) are attracted by and oviposit in grass-associated habitats. The pollen provided by these grasses is a potential source of nutrients for the larvae. Here, we assess the effect of Typha latifolia L. (Poales: Typhaceae), Echinochloa pyramidalis Lamarck, Pennisetum setaceum Forsskål, and Zea mays L. pollen on larval survival and rate of development in An. arabiensis under laboratory conditions. In addition, we characterize the carbon to nitrogen ratio and the size of pollen grains as a measure of diet quality. Carbon-rich pollen with a small grain size (T. latifolia and P. setaceum; 9.7 ± 0.3 × 103 and 5.5 ± 0.2 × 104 µm3, respectively) resulted in enhanced rates of development of An. arabiensis. In contrast, the larva fed on the nitrogen-rich control diet (TetraMin) was slower to develop, but demonstrated the highest larval survival. Larvae fed on carbon-rich and large-grained Z. mays pollen (4.1 ± 0.2 × 105 µm3) survived at similar levels as those fed on the control diet and also took a longer time to develop compared with larvae fed on the other pollens. While males and females did not appear to develop differently on the different pollen diets, males consistently emerged faster than their female counterparts. These results are discussed in relation to integrated vector management.

  1. Dispersal of Culex quinquefasciatus (Diptera: Culicidae) in a Hawaiian rain forest

    Science.gov (United States)

    Lapointe, D.A.

    2008-01-01

    Introduced mosquito-borne pathogens avian malaria (Plasmodium relictum Grassi and Feletti) and avian pox virus (Avipoxvirus) have been implicated in the past extinctions and declines of Hawaiian avifauna and remain significant obstacles to the recovery and restoration of endemic Hawaiian birds. Effective management of avian disease will require extensive mosquito control efforts that are guided by the local ecology of the vector Culex quinquefasciatus Say (Diptera: Culicidae). During October and November 1997 and September through November 1998 five mark-release-recapture experiments with laboratory-reared Cx. quinquefasciatus were conducted in a native rain forest on Hawaii Island. Of the overall 66,047 fluorescent dye-marked and released females, 1,192 (1.8%) were recaptured in 43-52 CO2-baited traps operated for 10-12-d trapping periods. Recaptured mosquitoes were trapped in all directions and at distances up to 3 km from the release site. The cumulative mean distance traveled (MDTs) over the trapping period ranged from a high of 1.89 km after 11 d (September 1998) to a low of 0.81 km after 11 d (November 1998). Released mosquitoes moved predominately in a downwind direction and they seemed to use forestry roads as dispersal corridors. Applying an estimated MDT of 1.6 km to a geographical information system-generated map of the Hakalau Forest National Wildlife Refuge clearly demonstrated that the effective refuge area could be reduced 60% by mosquitoes infiltrating into managed refuge lands. These findings should have significant implications for the design of future refuges and development of effective mosquito-borne avian disease control strategies.

  2. Toxicity and Larvicidal Activity of Podophyllum-Based Lignans Against Aedes aegypti (Diptera: Culicidae).

    Science.gov (United States)

    Maleck, Marise; Hollanda, Priscila de Oliveira; Serdeiro, Michele Teixeira; Soares, Renata Oliveira de Araújo; Honório, Nildimar Alves; Silva, Cláudia Gontijo

    2017-01-01

    Aedes aegypti L. (Diptera: Culicidae) is a mosquito species that has adapted to urban environments and is the main vector of dengue viruses. Because of the increasing incidence of dengue, a more environmentally acceptable insecticide needs to be found. Natural products have been and continue to be an important source of leading compounds that can be modified in order to develop new drugs. The lignan family of natural products includes compounds with a diverse spectrum of biological activity. Podophyllotoxin and its related lignans represent an exciting class of natural products that can be targeted at different types of biological activity and are therefore worth exploring further. This study had the aim of evaluating the larvicidal activity of an ethanolic extract from the rhizomes and roots of Podophyllum hexandrum (PM-3) and its isolated lignans, podophyllotoxone (1) and desoxypodophyllotoxin (2), on the larvae of the mosquito vector Ae. aegypti. The PM-3 extract and the compounds (1) and (2) were dissolved in a mixture of acetone and dimethylsulfoxide at final concentrations of 1, 10, 30, 50, 100, and 200 μg/ml. After dilution, the solutions were applied (μg/ml) to the larvae-rearing medium. Overall, the ethanolic extract from the rhizomes and roots of P. hexandrum and the compounds (1) and (2) showed larvicidal activity against the larvae of Ae. aegypti According to the results from this study, it can be concluded that podophyllotoxone (1) and desoxypodophyllotoxin (2) exhibited significant toxicity toward Ae. aegypti larvae. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  3. Mosquitoes (Diptera: Culicidae) and their relevance as disease vectors in the city of Vienna, Austria.

    Science.gov (United States)

    Lebl, Karin; Zittra, Carina; Silbermayr, Katja; Obwaller, Adelheid; Berer, Dominik; Brugger, Katharina; Walter, Melanie; Pinior, Beate; Fuehrer, Hans-Peter; Rubel, Franz

    2015-02-01

    Mosquitoes (Diptera: Culicidae) are important vectors for a wide range of pathogenic organisms. As large parts of the human population in developed countries live in cities, the occurrence of vector-borne diseases in urban areas is of particular interest for epidemiologists and public health authorities. In this study, we investigated the mosquito occurrence in the city of Vienna, Austria, in order to estimate the risk of transmission of mosquito-borne diseases. Mosquitoes were captured using different sampling techniques at 17 sites in the city of Vienna. Species belonging to the Culex pipiens complex (78.8 %) were most abundant, followed by Coquillettidia richiardii (10.2 %), Anopheles plumbeus (5.4 %), Aedes vexans (3.8 %), and Ochlerotatus sticticus (0.7 %). Individuals of the Cx. pipiens complex were found at 80.2 % of the trap sites, while 58.8 % of the trap sites were positive for Cq. richiardii and Ae. vexans. Oc. sticticus was captured at 35.3 % of the sites, and An. plumbeus only at 23.5 % of the trap sites. Cx. pipiens complex is known to be a potent vector and pathogens like West Nile virus (WNV), Usutu virus (USUV), Tahyna virus (TAHV), Sindbis virus (SINV), Plasmodium sp., and Dirofilaria repens can be transmitted by this species. Cq. richiardii is a known vector species for Batai virus (BATV), SINV, TAHV, and WNV, while Ae. vexans can transmit TAHV, USUV, WNV, and Dirofilaria repens. An. plumbeus and Oc. sticticus seem to play only a minor role in the transmission of vector-borne diseases in Vienna. WNV, which is already wide-spread in Europe, is likely to be the highest threat in Vienna as it can be transmitted by several of the most common species, has already been shown to pose a higher risk in cities, and has the possibility to cause severe illness.

  4. Spatiotemporal investigation of adult mosquito (Diptera: Culicidae) populations in an eastern Iowa county, USA.

    Science.gov (United States)

    DeGroote, John; Mercer, David R; Fisher, Jeffrey; Sugumaran, Ramanathan

    2007-11-01

    Landscape and climatic factors regulate distributions of mosquitoes (Diptera: Culicidae) over time and space. The anthropogenic control of mosquito populations is often carried out at a local administrative scale, and it is applied based on the relevant agency's experiential knowledge rather than systematic analysis of spatial and temporal data. To address this shortcoming, a spatial and temporal analysis of landscape and climatic parameters in relation to mosquito populations in Black Hawk County, IA, USA, has been carried out. Adult mosquito sampling took place using CDC light traps from May to August 2003 in representative landscapes. Mosquitoes were identified to species level with Aedes trivittatus (Coquillet) and Aedes vexans (Meigen) dominating the collection totals. The best publicly available spatial data on landscape and demographic attributes were collated and included land cover, human census, soils, floodplain, elevation, wetlands, hydrography, roads, and vegetation indices derived from satellite imagery. Spatial processing was carried out to organize landscape attributes for statistical comparison with abundance data from the potentially important West Nile virus (family Flaviviridae, genus Flavivirus, WNV) vector species Ae. vexans and Ae. trivittatus. Landscape parameters shown to be significantly correlated with mosquito counts included soil hydrological properties, presence in floodplain, wetland areas, and deciduous and bottomland forest cover. Data on temperature and precipitation were used to investigate the climatic influence on the temporal occurrence of mosquito population abundances. Late spring rain provided ample moisture for mosquito development, but low temperatures delayed widespread emergence of Ae. trivittatus and Ae. vexans until June 2003. Landscape and climatic impacts on adult mosquito population distributions were demonstrated, and these results could form the basis for the development of a spatiotemporal modeling framework that

  5. Smartphones and the plastic surgeon.

    Science.gov (United States)

    Al-Hadithy, Nada; Ghosh, Sudip

    2013-06-01

    Surgical trainees are facing limited training opportunities since the introduction of the European Working Time Directive. Smartphone sales are increasing and have usurped computer sales for the first time. In this context, smartphones are an important portable reference and educational tool, already in the possession of the majority of surgeons in training. Technology in the palm of our hands has led to a revolution of accessible information for the plastic surgery trainee and surgeon. This article reviews the uses of smartphones and applications for plastic surgeons in education, telemedicine and global health. A comprehensive guide to existing and upcoming learning materials and clinical tools for the plastic surgeon is included. E-books, podcasts, educational videos, guidelines, work-based assessment tools and online logbooks are presented. In the limited resource setting of modern clinical practice, savvy plastic surgeons can select technological tools to democratise access to education and best clinical care. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  6. Mechanisms of GABAergic Homeostatic Plasticity

    Directory of Open Access Journals (Sweden)

    Peter Wenner

    2011-01-01

    Full Text Available Homeostatic plasticity ensures that appropriate levels of activity are maintained through compensatory adjustments in synaptic strength and cellular excitability. For instance, excitatory glutamatergic synapses are strengthened following activity blockade and weakened following increases in spiking activity. This form of plasticity has been described in a wide array of networks at several different stages of development, but most work and reviews have focussed on the excitatory inputs of excitatory neurons. Here we review homeostatic plasticity of GABAergic neurons and their synaptic connections. We propose a simplistic model for homeostatic plasticity of GABAergic components of the circuitry (GABAergic synapses onto excitatory neurons, excitatory connections onto GABAergic neurons, cellular excitability of GABAergic neurons: following chronic activity blockade there is a weakening of GABAergic inhibition, and following chronic increases in network activity there is a strengthening of GABAergic inhibition. Previous work on GABAergic homeostatic plasticity supports certain aspects of the model, but it is clear that the model cannot fully account for some results which do not appear to fit any simplistic rule. We consider potential reasons for these discrepancies.

  7. Mitochondria, synaptic plasticity, and schizophrenia.

    Science.gov (United States)

    Ben-Shachar, Dorit; Laifenfeld, Daphna

    2004-01-01

    The conceptualization of schizophrenia as a disorder of connectivity, i.e., of neuronal?synaptic plasticity, suggests abnormal synaptic modeling and neuronal signaling, possibly as a consequence of flawed interactions with the environment, as at least a secondary mechanism underlying the pathophysiology of this disorder. Indeed, deficits in episodic memory and malfunction of hippocampal circuitry, as well as anomalies of axonal sprouting and synapse formation, are all suggestive of diminished neuronal plasticity in schizophrenia. Evidence supports a dysfunction of mitochondria in schizophrenia, including mitochondrial hypoplasia, and a dysfunction of the oxidative phosphorylation system, as well as altered mitochondrial-related gene expression. Mitochondrial dysfunction leads to alterations in ATP production and cytoplasmatic calcium concentrations, as well as reactive oxygen species and nitric oxide production. All of the latter processes have been well established as leading to altered synaptic strength or plasticity. Moreover, mitochondria have been shown to play a role in plasticity of neuronal polarity, and studies in the visual cortex show an association between mitochondria and synaptogenesis. Finally, mitochondrial gene upregulation has been observed following synaptic and neuronal activity. This review proposes that mitochondrial dysfunction in schizophrenia could cause, or arise from, anomalies in processes of plasticity in this disorder.

  8. An experimental study of plastic deformation of materials

    DEFF Research Database (Denmark)

    Knudsen, Tine

    in the investigated hot deformed samples (lnZ= 27.5 to 32) in general are cell block structures, and that the alignment of the cell block boundaries at low strain depends on the grain orientation, often in the same manner as in cold deformation. Part II investigates the energy stored in the dislocation structure...... after cold deformation by calorimetry and by analysis of the dislocation structure. The stored energy measured by calorimetry is found to be larger than that determined from the dislocation structure by a factor between 1.9 and 2.7, and this factor decreases with the plastic strain. Part III aimed...

  9. China Plastics Industry (2011) China Plastics Processing Industry Association

    Institute of Scientific and Technical Information of China (English)

    Li Ying

    2012-01-01

    General situation of China plastics industry in 2011 was reviewed, including the output and export/import of plastics products, synthetic resins,and plastics processing machinery, as well as major economic data, such as the total industrial values, sales and profits of plastics products, etc. Analysis of the market of plastics products in 2011 was made, and the developing trend of China plastics industry in 2012 was proposed.

  10. Lista das espécies de Culicidae (Diptera depositadas na Coleção de Entomologia Pe. J. S. Moure Species list of the Culicidae (Diptera deposited at the Entomological Collection "Pe. J. S. Moure"

    Directory of Open Access Journals (Sweden)

    Ana Cristina Tissot

    2008-01-01

    Full Text Available A Coleção de Entomologia do Departamento de Zoologia da Universidade Federal do Paraná (DZUP abriga cerca de 5.000.000 de exemplares de insetos. A coleção de Diptera está representada por aproximadamente 2.000.000 de exemplares, sendo Muscidae; Culicidae e Syrphidae as famílias mais representativas. A ordem Diptera possui cerca de 150.000 espécies descritas e a coleção conta com cerca de 103.000 exemplares representantes de 78 famílias. A lista das espécies pertencentes à família Culicidae conta com 9.579 exemplares, distribuídos em 2 subfamílias, 7 tribos, 17 gêneros, 26 subgêneros e 85 espécies. A maioria dos exemplares foi coletado em remanescentes de mata localizados em áreas urbanas e rurais, ambientes silvestres e urbanos de regiões litorâneas ou áreas urbanas pertencentes a diferentes cidades do Estado do Paraná, e algumas espécies incluídas foram capturadas nos Estados de São Paulo, Mato Grosso, Santa Catarina e no Distrito Federal. As informações específicas de cada exemplar, como local de coleta, latitude, longitude, coletor, data de coleta, método de coleta e nome do pesquisador que identificou, e também informações taxonômicas como ordem, tribo, gênero, subgênero e espécie, foram informatizados em um banco de dados.The Entomological Collection of Departamento de Zoologia of Universidade Federal do Paraná (DZUP accommodates about 5,000,000 insect specimens. The collection of Diptera is represented by approximately 2,000,000 specimens, being Muscidae, Culicidae and Syrphidae the most representative families. The Diptera order consists of approximately 150,000 described species and in the Collection about 103,000 specimens within 78 families are registered. The list of species of the family Culicidae presents 9,579 specimens within 2 subfamilies, 7 tribes, 17 genera, 26 subgenera and 85 species. Most specimens were captured in forest remnants in urban and rural areas, wild and urban environments in

  11. The Prism Plastic Calorimeter (PPC)

    CERN Multimedia

    2002-01-01

    This proposal supports two goals: \\\\ \\\\ First goal:~~Demonstrate that current, widely used plastic technologies allow to design Prism Plastic Calorimeter~(PPC) towers with a new ``liquid crystal'' type plastic called Vectra. It will be shown that this technique meets the requirements for a LHC calorimeter with warm liquids: safety, hermeticity, hadronic compensation, resolution and time response. \\\\ \\\\ Second goal:~~Describe how one can design a warm liquid calorimeter integrated into a LHC detector and to list the advantages of the PPC: low price, minimum of mechanical structures, minimum of dead space, easiness of mechanical assembly, accessibility to the electronics, possibility to recirculate the liquid. The absorber and the electronic being outside of the liquid and easily accessible, one has maximum flexibility to define them. \\\\ \\\\ The R&D program, we define here aims at showing the feasibility of these new ideas by building nine towers of twenty gaps and exposing them to electron and hadron beams.

  12. Plasticity in glutamatergic NTS neurotransmission.

    Science.gov (United States)

    Kline, David D

    2008-12-10

    Changes in the physiological state of an animal or human can result in alterations in the cardiovascular and respiratory system in order to maintain homeostasis. Accordingly, the cardiovascular and respiratory systems are not static but readily adapt under a variety of circumstances. The same can be said for the brainstem circuits that control these systems. The nucleus tractus solitarius (NTS) is the central integration site of baroreceptor and chemoreceptor sensory afferent fibers. This central nucleus, and in particular the synapse between the sensory afferent and second-order NTS cell, possesses a remarkable degree of plasticity in response to a variety of stimuli, both acute and chronic. This brief review is intended to describe the plasticity observed in the NTS as well as the locus and mechanisms as they are currently understood. The functional consequence of NTS plasticity is also discussed.

  13. The ZEPLIN-III Anti-Coincidence Veto Detector

    CERN Document Server

    Akimov, D Yu; Barnes, E J; Belov, V A; Burenkov, A A; Chepel, V; Currie, A; Edwards, B; Francis, V; Ghag, C; Hollingsworth, A; Horn, M; Kalmus, G E; Kobyakin, A S; Kovalenko, A G; Lebedenko, V N; Lindote, A; Lopes, M I; Lüscher, R; Lyons, K; Majewski, P; Murphy, A St J; Neves, F; Paling, S M; da Cunha, J Pinto; Preece, R; Quenby, J J; Reichhart, L; Scovell, P R; Solovov, V N; Smith, N J T; Smith, P F; Stekhanov, V N; Sumner, T J; Taylor, R; Thorne, C; Walker, R J

    2010-01-01

    The design, optimisation and construction of an anti-coincidence veto detector to complement the ZEPLIN-III direct dark matter search instrument is described. One tonne of plastic scintillator is arranged into 52 bars individually read out by photomultipliers and coupled to a gadolinium-loaded passive polypropylene shield. Particular attention has been paid to radiological content. The overall aim has been to achieve a veto detector of low threshold and high efficiency without the creation of additional background in ZEPLIN-III, all at a reasonable cost. Extensive experimental measurements of the components have been made, including radioactivity levels and performance characteristics. These have been used to inform a complete end-to-end Monte Carlo simulation that has then been used to calculate the expected performance of the new instrument, both operating alone and as an anti-coincidence detector for ZEPLIN-III. The veto device will be capable of rejecting over 65% of coincident nuclear recoil events from ...

  14. PLASTICITY OF SKELETAL MUSCLE STUDIED BY STEREOLOGY

    Directory of Open Access Journals (Sweden)

    Ida Eržen

    2011-05-01

    Full Text Available The present contribution provides an overview of stereological methods applied in the skeletal muscle research at the Institute of Anatomy of the Medical Faculty in Ljubljana. Interested in skeletal muscle plasticity we studied three different topics: (i expression of myosin heavy chain isoforms in slow and fast muscles under experimental conditions, (ii frequency of satellite cells in young and old human and rat muscles and (iii capillary supply of rat fast and slow muscles. We analysed the expression of myosin heavy chain isoforms within slow rat soleus and fast extensor digitorum longus muscles after (i homotopic and heterotopic transplantation of both muscles, (ii low frequency electrical stimulation of the fast muscle and (iii transposition of the fast nerve to the slow muscle. The models applied were able to turn the fast muscle into a completely slow muscle, but not vice versa. One of the indicators for the regenerative potential of skeletal muscles is its satellite cell pool. The estimated parameters, number of satellite cells per unit fibre length, corrected to the reference sarcomere length (Nsc/Lfib and number of satellite cells per number of nuclei (myonuclei and satellite cell nuclei (Nsc/Nnucl indicated that the frequency of M-cadherin stained satellite cells declines in healthy old human and rat muscles compared to young muscles. To access differences in capillary densities among slow and fast muscles and slow and fast muscle fibres, we have introduced Slicer and Fakir methods, and tested them on predominantly slow and fast rat muscles. Discussing three different topics that require different approach, the present paper reflects the three decades of the development of stereological methods: 2D analysis by simple point counting in the 70's, the disector in the 80's and virtual spatial probes in the 90's. In all methods the interactive computer assisted approach was utilised.

  15. Polishing compound for plastic surfaces

    Science.gov (United States)

    Stowell, Michael S.

    1995-01-01

    A polishing compound for plastic surfaces. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains fine particles silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS.TM., LEXAN.TM., LUCITE.TM., polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired.

  16. Polishing compound for plastic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Stowell, M.S.

    1993-01-01

    A polishing compound for plastic surfaces is disclosed. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains colloidal silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS{sup TM}, LEXAN{sup TM}, LUCITE{sup TM}, polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired.

  17. Larvicidal activity of lipophilic extract of Hypericum carinatum (Clusiaceae) against Aedes aegypti (Diptera: Culicidae) and benzophenones determination.

    Science.gov (United States)

    da Silva, Flavia Corvello; de Barros, Francisco Maikon Corrêa; Prophiro, Josiane Somariva; da Silva, Onilda Santos; Pereira, Thiago Nunes; de Loreto Bordignon, Sérgio A; Eifler-Lima, Vera Lucia; von Poser, Gilsane Lino

    2013-06-01

    In this study, the larvicidal activity of an enriched fraction of the major lipophilic phenolic compounds from Hypericum carinatum Griseb. (Clusiaceae) was investigated against larvae of Aedes aegypti (Diptera: Culicidae), the main vector of dengue virus in Brazil. The larval mortality rate ranged 37.33 to 72.00 % at concentrations of 66-200 μg/mL. The effect demonstrated to be dose-dependent. The lethal concentration 50 % and confidence interval were 100 and 88-111 μg/mL, respectively. The results could be attributed to the presence of cariphenone A and cariphenone B in concentrations of 1.24 ± 0.04 and 0.56 ± 0.01 %, respectively, determined by high-performance liquid chromatography. Besides, the results reinforce the potential of genus Hypericum as source of alternative insecticides.

  18. Culicidae and Ceratopogonidae (Diptera: Nematocera inhabiting phytotelmata in Iguazú National Park, Misiones Province, subtropical Argentina

    Directory of Open Access Journals (Sweden)

    Raúl E. CAMPOS

    2011-01-01

    Full Text Available Se presenta una lista de las fitotelmata más comunes y los Culicidae y Ceratopogonidae que las habitan, del Parque Nacional Iguazú, Misiones, Argentina; además de observaciones biológicas y de comportamiento. Especies de Poaceae, Bromeliaceae, Apiaceae, Araceae, Urticaceae, Marantaceae, y Arecaceae, fueron identificadas como fitotelmata. Fueron reconocidas 26 especies de culícidos y nueve de Ceratopogonidae. La mayor riqueza de especies de culícidos y ceratopogónidos se registraron en el bambú Guadua chacoensis (Poaceae y en los huecos de los árboles respectivamente. Catorce especies de culícidos y tres de ceratopogónidos habitan bambúes, dos y cinco en los huecos de los árboles, siete y tres en bromelias y nueve y una en otras fitotelmata, respectivamente.

  19. Larvicide and oviposition deterrent effects of fruit and leaf extracts from Melia azedarach L. on Aedes aegypti (L.) (Diptera: Culicidae).

    Science.gov (United States)

    Coria, C; Almiron, W; Valladares, G; Carpinella, C; Ludueña, F; Defago, M; Palacios, S

    2008-05-01

    Aedes aegypti (L.) (Diptera: Culicidae), the main urban vector of dengue, has developed resistance to various insecticides, making its control increasingly difficult. We explored the effects of Argentine Melia azedarach L. (Meliaceae) fruit and senescent leaf extracts on Ae. aegypti larval development and survival, by rearing cohorts of first instar mosquitoes in water with different extract concentrations. We also analysed oviposition deterrent activity in choice tests with extract-treated ovitraps. The leaf extract showed a strong larvicide activity, with all larvae dying before pupation, and significantly delayed development time. It strongly inhibited oviposition by Ae. aegypti females. The fruit extract showed much weaker effects. This first report of highly effective larvicidal, growth regulating and oviposition deterrent activity of a senescent leaf extract of M. azedarach against Ae. aegypti, suggests that such extract could represent a promising tool in the management of this mosquito pest.

  20. Larvicidal activity of Cyclamen (Myrsinaceae) extracts against the larvae of West Nile virus vector Culex pipiens L. (Diptera:Culicidae)

    Institute of Scientific and Technical Information of China (English)

    Emre Oz; Samed Koc; Olcay Dinc Dusen; Ramazan Mammadov; Huseyin Cetin

    2013-01-01

    Objective: To evaluate the larvicidal activity of the tuber extracts isolated from two species of Cyclamen (Cyclamen mirabile Hildebr. and Cyclamen alpinum Dammann ex. Sprenger) against Culex pipiens L. (Diptera: Culicidae). Methods: Twenty young (first-second) or older (third-fourth) instars of the Culex pipiens were exposed to various concentrations (100 to 1 000 ppm) of the extracts. Mortality was recorded after 12-, 24-, 48-, 72- and 96-h of exposure. Results: We determined that the young larval stages were more susceptible to the extracts in comparison with the older larval stages. A comparison of LC50 and LC90 values has shown that Cyclamen mirabile was more active than Cyclamen alpinum. Conclusions: This study is the first to report on the larvicidal activity of the extracts of Cyclamen species against Culex pipiens. More studies are needed to isolate and identify the active components involved, their mode of action, and effects on other mosquito and pest species.

  1. Ecology, monitoring and mapping of insecticide resistance of malaria vector, Anopheles culicifacies (Diptera: Culicidae to different imagicides in Iran

    Directory of Open Access Journals (Sweden)

    Hassan Vatandoost

    2017-01-01

    Full Text Available Objective: To work on bioecology and to monitor and map the insecticide resistance of malaria vector, Anopheles culicifacies (An. culicifacies (Diptera: Culicidae in Iran. Methods: Mosquitoes were collected from different breeding places in Sistan and Baluchistan Province and then reread at insectary. F1 generation was used for susceptibility tests. All the impregnated papers were provided by World Health Organization (WHO and tests were carried out according to WHO guideline. Results: Results of adult susceptibility tests against female An. culicifecies revealed that this species was resistant to dichloro-diphenyl-trichloroethane, dieldrin, tolerated to bendiocarb, propoxur and deltamethrin and susceptible to other imagicides recommended by WHO. An. culicifecies was resistant to organochlorine insecticides and tolerant to organophosphae, carbamate and pyrethroids. Conclusions: Results of the ecology and susceptibility status of malaria vectors will help authorities to make decision for vector control. More biomedical assays was required to found the mechanisms of insecticide resistance.

  2. Ways of Viewing Pictorial Plasticity

    Directory of Open Access Journals (Sweden)

    Maarten W. A. Wijntjes

    2017-03-01

    Full Text Available The plastic effect is historically used to denote various forms of stereopsis. The vivid impression of depth often associated with binocular stereopsis can also be achieved in other ways, for example, using a synopter. Accounts of this go back over a hundred years. These ways of viewing all aim to diminish sensorial evidence that the picture is physically flat. Although various viewing modes have been proposed in the literature, their effects have never been compared. In the current study, we compared three viewing modes: monocular blur, synoptic viewing, and free viewing (using a placebo synopter. By designing a physical embodiment that was indistinguishable for the three experimental conditions, we kept observers naïve with respect to the differences between them; 197 observers participated in an experiment where the three viewing modes were compared by performing a rating task. Results indicate that synoptic viewing causes the largest plastic effect. Monocular blur scores lower than synoptic viewing but is still rated significantly higher than the baseline conditions. The results strengthen the idea that synoptic viewing is not due to a placebo effect. Furthermore, monocular blur has been verified for the first time as a way of experiencing the plastic effect, although the effect is smaller than synoptic viewing. We discuss the results with respect to the theoretical basis for the plastic effect. We show that current theories are not described with sufficient details to explain the differences we found.

  3. Vascular plasticity in cerebrovascular disorders

    DEFF Research Database (Denmark)

    Edvinsson, Lars I H; Povlsen, Gro Klitgaard

    2011-01-01

    Cerebral ischemia remains a major cause of morbidity and mortality with little advancement in subacute treatment options. This review aims to cover and discuss novel insight obtained during the last decade into plastic changes in the vasoconstrictor receptor profiles of cerebral arteries and micr...

  4. American Society of Plastic Surgeons

    Science.gov (United States)

    ... know the risks and trust a board-certified plastic surgeon to perform your cosmetic or reconstructive surgery. ASPS member surgeons have the training and experience that ... 1300 Chain Bridge Road McLean, VA 22101 (703) 790-5454 Timothy Germain ...

  5. Biobased plastics in a bioeconomy.

    Science.gov (United States)

    Philp, J C; Ritchie, R J; Guy, K

    2013-02-01

    Bioeconomy plans include a biobased industries sector in which some oil-derived plastics and chemicals are replaced by new or equivalent products derived, at least partially, from biomass. Some of these biobased products are here today, but to fulfil their societal potential, greater attention is required to promote awareness, and to improve their market share while making valuable contributions to climate change mitigation.

  6. Field based plastic contamination sensing

    Science.gov (United States)

    The United States has a long-held reputation of being a dependable source of high quality, contaminant-free cotton. Recently, increased incidence of plastic contamination from sources such as shopping bags, vegetable mulch, surface irrigation tubing, and module covers has threatened the reputation o...

  7. Plasticity Theory of Fillet Welds

    DEFF Research Database (Denmark)

    Hansen, Thomas

    2005-01-01

    This paper deals with simple methods for calculation of fillet welds based on the theory of plasticity. In developing the solutions the lower-bound theorem is used. The welding material and parts of the base material are subdivided into triangular regions with homogeneous stress fields; thereby...

  8. For the Classroom: "Plastic" Jellyfish.

    Science.gov (United States)

    Current: The Journal of Marine Education, 1989

    1989-01-01

    Describes an activity in which students monitor the plastic waste production in their households, research its effects on freshwater and marine life, and propose ways to lessen the problem. Provides objectives, background information, materials, procedures, extension activities, and an evaluation for students. (Author/RT)

  9. Oxytocin and Maternal Brain Plasticity

    Science.gov (United States)

    Kim, Sohye; Strathearn, Lane

    2016-01-01

    Although dramatic postnatal changes in maternal behavior have long been noted, we are only now beginning to understand the neurobiological mechanisms that support this transition. The present paper synthesizes growing insights from both animal and human research to provide an overview of the plasticity of the mother's brain, with a particular…

  10. Making sense of plastics recycling

    NARCIS (Netherlands)

    Van Bruggen, E.; Koster, R.P.; Rageart, K.; Cardon, L.; Moerman, M.; Blessing, E.

    2012-01-01

    Major benefits of plastics recycling are reduced depletion of non-renewable resources and reduction of world-wide waste. Traditional thermo-mechanical recycling causes reduction of mechanical properties for most thermoplastics. Down-cycled materials may nevertheless be suited for certain useful appl

  11. Plastic Surgeons Often Miss Patients' Mental Disorders

    Science.gov (United States)

    ... More Health News on: Mental Disorders Plastic and Cosmetic Surgery Recent Health News Related MedlinePlus Health Topics Mental Disorders Plastic and Cosmetic Surgery About MedlinePlus Site Map FAQs Customer Support Get ...

  12. Lecture notes on Elasto-plastic materials

    DEFF Research Database (Denmark)

    Hededal, Ole

    2007-01-01

    Brief introduction to material modelling within the framework of rate independent elasto-plastic constitutive modelling......Brief introduction to material modelling within the framework of rate independent elasto-plastic constitutive modelling...

  13. Phenotypic plasticity with instantaneous but delayed switches

    NARCIS (Netherlands)

    Utz, Margarete; Jeschke, Jonathan M.; Loeschcke, Volker; Gabriel, Wilfried

    2014-01-01

    Phenotypic plasticity is a widespread phenomenon, allowing organisms to better adapt to changing environments. Most empirical and theoretical studies are restricted to irreversible plasticity where the expression of a specific phenotype is mostly determined during development. However, reversible pl

  14. Interpretation on Recycling Plastics from Shredder Residue

    Science.gov (United States)

    EPA is considering an interpretation of its regulations that would generally allow for recycling of plastic separated from shredder residue under the conditions described in the Voluntary Procedures for Recycling Plastics from Shredder Residue.

  15. Developmental plasticity and evolution--quo vadis?

    National Research Council Canada - National Science Library

    Moczek, A P

    2015-01-01

    The role of developmental (phenotypic) plasticity in ecology and evolution is receiving a growing appreciation among the biologists, and many plasticity-specific concepts have become well established as part of the mainstream evolutionary...

  16. Gas Experiments with Plastic Soda Bottles.

    Science.gov (United States)

    Kavanah, Patrick; Zipp, Arden P.

    1998-01-01

    Describes the use of an inexpensive device consisting of a plastic soda bottle and a modified plastic cap in a range of demonstrations and experimental activities having to do with the behavior of gases. (Author/WRM)

  17. [The history of plastic surgery in Israel].

    Science.gov (United States)

    Wiser, Itay; Scheflan, Michael; Heller, Lior

    2014-09-01

    The medical institutions in the country have advanced together with the development of the state of Israel. Plastic surgery, which has progressed significantly during the 20th century, has also grown rapidly in the new state. The arrival of Jewish plastic surgeons from all over the world with the knowledge and experience gained in their countries of origin, as well as the need for reconstructive surgical treatment for many combat injured soldiers, also contributed to the development of plastic surgery. This review tells the story of plastic surgery in Israel, since its foundation until nowadays. This article reviews the work of the founders of plastic surgery in Israel, indicating significant milestones in its development, and clinical and scientific contribution to the international plastic surgery profession. Moreover, the article describes the current condition of the field of plastic surgery in Israel and presents the trends and the future challenges facing the next generation of plastic surgery in Israel.

  18. Innovation Promotes Development of Plastic Assistant

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Driven by the rapid growth of China's plastic product sector, the development of the plastic sector has been accelerated and assistant products are now becoming more multi-function, high performance, high in molecular weight and environmentfriendly.

  19. Calculus III essentials

    CERN Document Server

    REA, Editors of

    2012-01-01

    REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Calculus III includes vector analysis, real valued functions, partial differentiation, multiple integrations, vector fields, and infinite series.

  20. ARE PLASTIC GROCERY BAGS SACKING THE ENVIRONMENT?

    Directory of Open Access Journals (Sweden)

    Mangal Gogte

    2009-12-01

    Full Text Available This paper is oriented on analysis impacts of plastic bags on environment. In this paper is analyzed did plastic bags are so harmful, and what are the main ingredients of it. One part of this paper is oriented on effects of plastic bags and management of their usage. There is also made comparative analysis between impacts of plastic and paper bags on environment.

  1. Economical and Ecological Fesasibility of Plastic Recycling

    OpenAIRE

    Hirschpold, Andrew; Juctye, Kristina; Renzhong, Jiang; Debin, LIU; Varona, Hector P.; Kevelaitis, Karolis

    2005-01-01

    #Group 3 International Nat Bas Economical and Ecological Feasibility of Plastic Recycling Abstract This project is carried out as the final project for the first semester of Bachelor of Science studies. Our project will aim on plastic recycling. Plastic is a manmade material which covers a range of synthetic or semi-synthetic products made thru polymerization. The development of plastic products has accompanied the development of human’s history since it was invented while they ...

  2. WE(EE) Demand - Recycled Plastic

    OpenAIRE

    Førby, Marie; Pedersen, Jakob; Borgen, Nanna; Hansen, Rasmus Nør

    2015-01-01

    Plastic management – from production to waste – has massive negative effects on the environment of which one of the main problems are the CO2 released from the fossil fuels. The focus of this paper lies on the possibilities of increasing demand for recycled plastics from electric and electronic equipment (WEEE-plastic) through modifications in the Danish waste systems. Due to the chemical build of plastic, it is not possible to reprocess it with mechanical recycle technologies while keeping t...

  3. Think small: nanotechnology for plastic surgeons.

    Science.gov (United States)

    Nasir, Amir R; Brenner, Sara A

    2012-11-01

    The purpose of this article is to introduce the topic of nanotechnology to plastic surgeons and to discuss its relevance to medicine in general and plastic surgery in particular. Nanotechnology will be defined, and some important historical milestones discussed. Common applications of nanotechnology in various medical and surgical subspecialties will be reviewed. Future applications of nanotechnology to plastic surgery will be examined. Finally, the critical field of nanotoxicology and the safe use of nanotechnology in medicine and plastic surgery will be addressed.

  4. The advent of the restorative plastic surgeon.

    Science.gov (United States)

    Carty, Matthew J; Pribaz, Julian J; Talbot, Simon G; Caterson, Edward J; Pomahac, Bohdan

    2014-01-01

    Plastic surgery is presently typified by the existence of discrete clinical identities, namely that of the cosmetic plastic surgeon and the reconstructive plastic surgeon. The emergence of vascularized composite allotransplantation has been accompanied by the development of a third distinct clinical identity, that of the restorative plastic surgeon. The authors describe the core competencies that characterize this new identity, and discuss the implications of the advent of this new professional paradigm.

  5. Economical and Ecological Fesasibility of Plastic Recycling

    OpenAIRE

    Hirschpold, Andrew; Juctye, Kristina; Renzhong, Jiang; Debin, Liu; Varona, Hector P.; Kevelaitis, Karolis

    2005-01-01

    #Group 3 International Nat Bas Economical and Ecological Feasibility of Plastic Recycling Abstract This project is carried out as the final project for the first semester of Bachelor of Science studies. Our project will aim on plastic recycling. Plastic is a manmade material which covers a range of synthetic or semi-synthetic products made thru polymerization. The development of plastic products has accompanied the development of human’s history since it was invented while they ...

  6. Will Banning Free Plastic Bags Reduce Pollution?

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    No more free plastic bags from June 1,2008.That’s the message to Chinese shoppers after a government ban on all production,sales or use of plastic bags less than 0.025 mm thick comes into force from this date.Nowadays,supermarkets give out 1 billion plastic bags every day while other shops collectively use double that amount. Consumers will have to pay for plastic bags exceeding this thickness,if they want this option.

  7. Plastics. A Handbook for Workplace Educators.

    Science.gov (United States)

    Curry, Donna; Smith, Mikki

    This handbook was designed to help adult literacy education teachers to understand the plastics industry, develop a curriculum, and teach basic skills classes in a plastics company. The book contains four main sections. The first section, on the basics of plastics, contains a brief history of the industry, an elementary description of the…

  8. 7 CFR 58.326 - Plastic cream.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Plastic cream. 58.326 Section 58.326 Agriculture... Material § 58.326 Plastic cream. To produce plastic cream eligible for official certification, the quality of the cream used shall meet the requirements of cream acceptable for the manufacture of U.S....

  9. Adult myelination:wrapping up neuronal plasticity

    Institute of Scientific and Technical Information of China (English)

    Megan ORourke; Robert Gasperini; Kaylene M.Young

    2014-01-01

    In this review, we outline the major neural plasticity mechanisms that have been identiifed in the adult central nervous system (CNS), and offer a perspective on how they regulate CNS function. In particular we examine how myelin plasticity can operate alongside neurogenesis and synaptic plasticity to inlfuence information processing and transfer in the mature CNS.

  10. The evolution of age-dependent plasticity

    NARCIS (Netherlands)

    Fischer, Barbara; van Doorn, G. Sander; Dieckmann, Ulf; Taborsky, Barbara

    2014-01-01

    When organisms encounter environments that are heterogeneous in time, phenotypic plasticity is often favored by selection. The degree of such plasticity can vary during an organism''s lifetime, but the factors promoting differential plastic responses at different ages or life stages remain poorly un

  11. 75 FR 34170 - Plastic Omnium Automotive Exteriors, LLC, Anderson, SC; Plastic Omnium Automotive Exteriors, LLC...

    Science.gov (United States)

    2010-06-16

    ... Employment and Training Administration Plastic Omnium Automotive Exteriors, LLC, Anderson, SC; Plastic Omnium... Assistance on March 18, 2010, applicable to workers of Plastic Omnium Automotive Exteriors, LLC, Anderson... have occurred involving workers in support of the Anderson, South Carolina location of Plastic...

  12. Plastic deformation and contact area of an elastic-plastic contact of ellipsoid bodies after unloading

    NARCIS (Netherlands)

    Jamari, Jamari; Schipper, Dirk J.

    2007-01-01

    This paper presents theoretical and experimental results of the residual or plastic deformation and the plastic contact area of an elastic–plastic contact of ellipsoid bodies after unloading. There are three regime responses of the deformation and contact area: elastic, elastic–plastic and fully

  13. Strain rate dependence in plasticized and un-plasticized PVC

    Directory of Open Access Journals (Sweden)

    Siviour C.R.

    2012-08-01

    Full Text Available An experimental and analytical investigation has been made into the mechanical behaviour of two poly (vinyl chloride (PVC polymers – an un-plasticized PVC and a diisononyl phthalate (DINP-plasticized PVC. Measurements of the compressive stress-strain behaviour of the PVCs at strain rates ranging from 10−3 to 103s−1 and temperatures from − 60 to 100∘C are presented. Dynamic Mechanical Analysis was also performed in order to understand the material transitions observed in compression testing as the strain rate is increased. This investigation develops a better understanding of the interplay between the temperature dependence and rate dependence of polymers, with a focus on locating the temperature and rate-dependent material transitions that occur during high rate testing.

  14. Strain rate dependence in plasticized and un-plasticized PVC

    Science.gov (United States)

    Kendall, M. J.; Siviour, C. R.

    2012-08-01

    An experimental and analytical investigation has been made into the mechanical behaviour of two poly (vinyl chloride) (PVC) polymers - an un-plasticized PVC and a diisononyl phthalate (DINP)-plasticized PVC. Measurements of the compressive stress-strain behaviour of the PVCs at strain rates ranging from 10-3 to 103s-1 and temperatures from - 60 to 100∘C are presented. Dynamic Mechanical Analysis was also performed in order to understand the material transitions observed in compression testing as the strain rate is increased. This investigation develops a better understanding of the interplay between the temperature dependence and rate dependence of polymers, with a focus on locating the temperature and rate-dependent material transitions that occur during high rate testing.

  15. American Academy of Facial Plastic and Reconstructive Surgery

    Science.gov (United States)

    ... is the world's largest specialty association for facial plastic surgery. It represents more than 2,700 facial plastic ... the American Board of Otolaryngology , which includes facial plastic surgery. Others are certified in plastic surgery, ophthalmology, and ...

  16. Thermoplastic Starch Prepared with Different Plasticizers:Relation between Degree of Plasticization and Properties

    Institute of Scientific and Technical Information of China (English)

    ZUO Yingfeng; GU Jiyou; TAN Haiyan; ZHANG Yanhua

    2015-01-01

    Ethylene glycol, glycerol, sorbitol, formamide, and urea were used as plasticizers for the preparation of thermoplastic starch (TPS) from corn starch. The properties of TPS were tested by analysis method. The results showed that TPSs were more highly plasticized with amines than alcohols. For the same type of plasticizer, the degree of plasticization decreased as the molecular weight of plasticizer increased. The relationship between plasticization degree and TPS properties was characterized and described by mechanical properties and water absorption. The experimental results showed that when the degree of plasticization increased, the tensile strength decreased and the elongation at breakage and water absorption increased.

  17. Overwintering Biology of Culex (Diptera: Culicidae) Mosquitoes in the Sacramento Valley of California

    Science.gov (United States)

    NELMS, BRITTANY M.; MACEDO, PAULA A.; KOTHERA, LINDA; SAVAGE, HARRY M.; REISEN, WILLIAM K.

    2014-01-01

    At temperate latitudes, Culex (Diptera: Culicidae) mosquitoes typically overwinter as adult females in reproductive arrest and also may serve as reservoir hosts for arboviruses when cold temperatures arrest viral replication. To evaluate their role in the persistence of West Nile virus (WNV) in the Sacramento Valley of California, the induction and termination of diapause were investigated for members of the Culex pipiens (L.) complex, Culex tarsalis Coquillett, and Culex stigmatosoma Dyar under field, seminatural, and experimental conditions. All Culex spp. remained vagile throughout winter, enabling the collection of 3,174 females and 1,706 males from diverse habitats during the winters of 2010–2012. Overwintering strategies included both quiescence and diapause. In addition, Cx. pipiens form molestus Forskäl females remained reproductively active in both underground and aboveground habitats. Some blood-fed, gravid, and parous Cx. tarsalis and Cx. pipiens complex females were collected throughout the winter period. Under both field and experimental conditions, Cx. tarsalis and Cx. stigmatosoma females exposed to autumnal conditions arrested primary follicular maturation at previtellogenic stage I, with primary to secondary follicular ratios <1.5 (indicative of a hormonally induced diapause). In contrast, most Cx. pipiens complex females did not enter reproductive diapause and ovarian follicles matured to ≥stage I–II (host-seeking arrest) or were found in various stages of degeneration. Diapause was initiated in the majority of Cx. tarsalis and Cx. stigmatosoma females by mid-late October and was terminated after the winter solstice, but host-seeking seemed limited by temperature. An accrual of 97.52 ± 30.7 and 162.85 ± 79.3 degree-days after the winter solstice was estimated to be necessary for diapause termination in Cx. tarsalis under field and seminatural conditions, respectively. An increase in the proportion of blood-fed Culex females in resting

  18. Recycling of plastic waste: Presence of phthalates in plastics from households and industry

    DEFF Research Database (Denmark)

    Pivnenko, Kostyantyn; Eriksen, Marie Kampmann; Martín-Fernández, J. A.

    2016-01-01

    Plastics recycling has the potential to substitute virgin plastics partially as a source of raw materials in plastic product manufacturing. Plastic as a material may contain a variety of chemicals, some potentially hazardous. Phthalates, for instance, are a group of chemicals produced in large...... recognised, the influence of plastic recycling on phthalate content has been hypothesised but not well documented. In the present work we analysed selected phthalates (DMP, DEP, DPP, DiBP, DBP, BBzP, DEHP, DCHP and DnOP) in samples of waste plastics as well as recycled and virgin plastics. DBP, DiBP and DEHP...... product manufacturing (labelling, gluing, etc.) and were not removed following recycling of household waste plastics. Furthermore, DEHP was identified as a potential indicator for phthalate contamination of plastics. Close monitoring of plastics intended for phthalates-sensitive applications...

  19. Plastic waste as a resource. Strategies for reduction and utilization of plastic waste

    OpenAIRE

    Pasqual i Camprubí, Gemma

    2010-01-01

    Plastic materials have experienced a spectacular rate of growth in recent decades, consequently, production of plastics, and likewise their consumption, has increased markedly since 1950. Moreover, they are lightweight and durable, as well as can be moulded into a variety of products that can be manufactured in many different types of plastic and in a wide range of applications. Inevitably, continually increasing amounts of used plastic are originating daily, resulting in a plastic waste prob...

  20. Public health impact of plastics: An overview

    Directory of Open Access Journals (Sweden)

    Neeti Rustagi

    2011-01-01

    Full Text Available Plastic, one of the most preferred materials in today′s industrial world is posing serious threat to environment and consumer′s health in many direct and indirect ways. Exposure to harmful chemicals during manufacturing, leaching in the stored food items while using plastic packages or chewing of plastic teethers and toys by children are linked with severe adverse health outcomes such as cancers, birth defects, impaired immunity, endocrine disruption, developmental and reproductive effects etc. Promotion of plastics substitutes and safe disposal of plastic waste requires urgent and definitive action to take care of this potential health hazard in future.

  1. Public health impact of plastics: An overview

    Science.gov (United States)

    Rustagi, Neeti; Pradhan, S. K.; Singh, Ritesh

    2011-01-01

    Plastic, one of the most preferred materials in today's industrial world is posing serious threat to environment and consumer's health in many direct and indirect ways. Exposure to harmful chemicals during manufacturing, leaching in the stored food items while using plastic packages or chewing of plastic teethers and toys by children are linked with severe adverse health outcomes such as cancers, birth defects, impaired immunity, endocrine disruption, developmental and reproductive effects etc. Promotion of plastics substitutes and safe disposal of plastic waste requires urgent and definitive action to take care of this potential health hazard in future. PMID:22412286

  2. Process for remediation of plastic waste

    Science.gov (United States)

    Pol, Vilas G [Westmont, IL; Thiyagarajan, Pappannan [Germantown, MD

    2012-04-10

    A single step process for degrading plastic waste by converting the plastic waste into carbonaceous products via thermal decomposition of the plastic waste by placing the plastic waste into a reactor, heating the plastic waste under an inert or air atmosphere until the temperature of 700.degree. C. is achieved, allowing the reactor to cool down, and recovering the resulting decomposition products therefrom. The decomposition products that this process yields are carbonaceous materials, and more specifically egg-shaped and spherical-shaped solid carbons. Additionally, in the presence of a transition metal compound, this thermal decomposition process produces multi-walled carbon nanotubes.

  3. New Class of Plastic Bulk Metallic Glass

    Science.gov (United States)

    Chen, L. Y.; Fu, Z. D.; Zhang, G. Q.; Hao, X. P.; Jiang, Q. K.; Wang, X. D.; Cao, Q. P.; Franz, H.; Liu, Y. G.; Xie, H. S.; Zhang, S. L.; Wang, B. Y.; Zeng, Y. W.; Jiang, J. Z.

    2008-02-01

    An intrinsic plastic Cu45Zr46Al7Ti2 bulk metallic glass (BMG) with high strength and superior compressive plastic strain of up to 32.5% was successfully fabricated by copper mold casting. The superior compressive plastic strain was attributed to a large amount of randomly distributed free volume induced by Ti minor alloying, which results in extensive shear band formation, branching, interaction and self-healing of minor cracks. The mechanism of plasticity presented here suggests that the creation of a large amount of free volume in BMGs by minor alloying or other methods might be a promising new way to enhance the plasticity of BMGs.

  4. Public health impact of plastics: An overview.

    Science.gov (United States)

    Rustagi, Neeti; Pradhan, S K; Singh, Ritesh

    2011-09-01

    Plastic, one of the most preferred materials in today's industrial world is posing serious threat to environment and consumer's health in many direct and indirect ways. Exposure to harmful chemicals during manufacturing, leaching in the stored food items while using plastic packages or chewing of plastic teethers and toys by children are linked with severe adverse health outcomes such as cancers, birth defects, impaired immunity, endocrine disruption, developmental and reproductive effects etc. Promotion of plastics substitutes and safe disposal of plastic waste requires urgent and definitive action to take care of this potential health hazard in future.

  5. Plastic Deformation of Metal Surfaces

    DEFF Research Database (Denmark)

    Hansen, Niels; Zhang, Xiaodan; Huang, Xiaoxu

    2013-01-01

    parameters by TEM and EBSD and apply strength-structural relationships established for the bulk metal deformed to high strains. This technique has been applied to steel deformed by high energy shot peening and a calculated stress gradient at or near the surface has been successfully validated by hardness......Plastic deformation of metal surfaces by sliding and abrasion between moving parts can be detrimental. However, when the plastic deformation is controlled for example by applying different peening techniques hard surfaces can be produced which can increase the fracture resistance and fatigue life...... of metal components. An optimization of processes and material parameters must be based on a quantification of stress and strain gradients at the surface and in near surface layer where the structural scale can reach few tens of nanometers. For such fine structures it is suggested to quantify structural...

  6. Computational Strain Gradient Crystal Plasticity

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Kysar, Jeffrey W.

    2011-01-01

    A model for strain gradient crystal visco-plasticity is formulated along the lines proposed by Fleck andWillis (2009) for isotropic plasticity. Size-effects are included in the model due to the addition of gradient terms in both the free energy as well as through a dissipation potential. A finite...... element solution method is presented, which delivers the slip-rate field and the velocity-field based on two minimum principles. Some plane deformation problems relevant for certain specific orientations of a face centered cubic crystal under plane loading conditions are studied, and effective in......-plane parameters are developed based on the crystallographic properties of the material. The problem of cyclic shear of a single crystal between rigid platens is studied as well as void growth of a cylindrical void....

  7. Vascular plasticity in cerebrovascular disorders

    DEFF Research Database (Denmark)

    Edvinsson, Lars I H; Povlsen, Gro Klitgaard

    2011-01-01

    Cerebral ischemia remains a major cause of morbidity and mortality with little advancement in subacute treatment options. This review aims to cover and discuss novel insight obtained during the last decade into plastic changes in the vasoconstrictor receptor profiles of cerebral arteries and micr......Cerebral ischemia remains a major cause of morbidity and mortality with little advancement in subacute treatment options. This review aims to cover and discuss novel insight obtained during the last decade into plastic changes in the vasoconstrictor receptor profiles of cerebral arteries...... therapeutic target for prevention of vasoconstrictor receptor upregulation after stroke. Together, those findings provide new perspectives on the pathophysiology of ischemic stroke and point toward a novel way of reducing vasoconstriction, neuronal cell death, and thus neurologic deficits after stroke....

  8. Polishing compound for plastic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Stowell, M.S.

    1991-01-01

    This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

  9. Exercise and plasticize the brain

    DEFF Research Database (Denmark)

    Mala, Hana; Wilms, Inge

    Neuroscientific studies continue to shed light on brain’s plasticity and its innate mechanisms to recover. The recovery process includes re-wiring of the existing circuitry, establishment of new connections, and recruitment of peri-lesional and homologous areas in the opposite hemisphere. The pla......Neuroscientific studies continue to shed light on brain’s plasticity and its innate mechanisms to recover. The recovery process includes re-wiring of the existing circuitry, establishment of new connections, and recruitment of peri-lesional and homologous areas in the opposite hemisphere...... potential through available training methods. Furthermore, research into neurorehabilitation is dependent on input from a number of fields (such as neuropsychology, neurology, physiotherapy, speech and language therapy, special education, and social work) and requires a close collaboration between...

  10. Cryptic Species in the Anopheles (Nyssorhynchus) albitarsis (Diptera: Culicidae) Complex: Incongruence Between Random Amplified Polymorphic DNA-Polymerase Chain Reaction Identification and Analysis of Mitochondrial DNA COI Gene Sequences

    Science.gov (United States)

    2005-11-01

    SYSTEMATICS Cryptic Species in the Anopheles (Nyssorhynchus) albitarsis (Diptera: Culicidae) Complex: Incongruence Between Random Amplified...J.M.,O.Pellmyr, J.N.Thompson, andR.G.Harrison. 1994. Phylogeny of Greya ( Lepidoptera : Prodoxidae), based on nucleotide sequence variation in

  11. Anomalia de Classe III

    OpenAIRE

    2014-01-01

    Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária Introdução: A anomalia de classe III, é uma má oclusão que afeta os indivíduos psicologicamente, pois hoje em dia, a estética é socialmente valorizada. Deste modo, o diagnóstico deve ser executado precocemente para que os indivíduos portadores desta anomalia, possam ser acompanhados desde criança, pelos profissionais área da Medicina...

  12. Brain plasticity and aerobic fitness

    OpenAIRE

    2014-01-01

    Regular aerobic exercise has a wide range of positive effects on health and cognition. Exercise has been demonstrated to provide a particularly powerful and replicable method of triggering a wide range of structural changes within both human and animal brains. However, the details and mechanisms of these changes remain poorly understood. This thesis undertakes a comprehensive examination of the relationship between brain plasticity and aerobic exercise. A large, longitudinal experiment ...

  13. The rise of plastic bioelectronics

    Science.gov (United States)

    Someya, Takao; Bao, Zhenan; Malliaras, George G.

    2016-12-01

    Plastic bioelectronics is a research field that takes advantage of the inherent properties of polymers and soft organic electronics for applications at the interface of biology and electronics. The resulting electronic materials and devices are soft, stretchable and mechanically conformable, which are important qualities for interacting with biological systems in both wearable and implantable devices. Work is currently aimed at improving these devices with a view to making the electronic-biological interface as seamless as possible.

  14. Modified boundary layer analysis for a mode III crack problem

    Energy Technology Data Exchange (ETDEWEB)

    Beom, Hyeon Gyu; Kim, Yu Hwan; Cho, Chong Du; Kim, Chang Boo [Inha University, Incheon (Korea, Republic of)

    2008-04-15

    A modified boundary layer problem of a semi-infinite crack in an elastic-perfectly plastic material under a Mode III load is analyzed. The analytic solution of elastic fields is derived by using complex function theory. It is found that the size and the shape of the plastic zone near the crack tip depend on the elastic T-stress given on the remote boundary. A method for determining higher order singular solutions of elastic fields is also proposed. In order to determine the higher order singular solutions of the elastic fields, Williams expansion of the solution is used. Higher order terms in the Williams expansion are obtained through simple mathematical manipulation. The coefficients of each term in the Williams expansion are also calculated numerically with the J-based mutual integral

  15. The Future of Plastic Surgery: Surgeon's Perspective.

    Science.gov (United States)

    Ozturk, Sinan; Karagoz, Huseyin; Zor, Fatih

    2015-11-01

    Since the days of Sushruta, innovation has shaped the history of plastic surgery. Plastic surgeons have always been known as innovators or close followers of innovations. With this descriptive international survey study, the authors aimed to evaluate the future of plastic surgeons by analyzing how plastic surgery and plastic surgeons will be affected by new trends in medicine. Aesthetic surgery is the main subclass of plastic surgery thought to be the one that will change the most in the future. Stem cell therapy is considered by plastic surgeons to be the most likely "game changer." Along with changes in surgery, plastic surgeons also expect changes in plastic surgery education. The most approved assumption for the future of plastic surgery is, "The number of cosmetic nonsurgical procedures will increase in the future." If surgeons want to have better outcomes in their practice, they must at least be open minded for innovations if they do not become innovators themselves. Besides the individual effort of each surgeon, international and local plastic surgery associations should develop new strategies to adopt these innovations in surgical practice and education.

  16. Applications and societal benefits of plastics.

    Science.gov (United States)

    Andrady, Anthony L; Neal, Mike A

    2009-07-27

    This article explains the history, from 1600 BC to 2008, of materials that are today termed 'plastics'. It includes production volumes and current consumption patterns of five main commodity plastics: polypropylene, polyethylene, polyvinyl chloride, polystyrene and polyethylene terephthalate. The use of additives to modify the properties of these plastics and any associated safety, in use, issues for the resulting polymeric materials are described. A comparison is made with the thermal and barrier properties of other materials to demonstrate the versatility of plastics. Societal benefits for health, safety, energy saving and material conservation are described, and the particular advantages of plastics in society are outlined. Concerns relating to littering and trends in recycling of plastics are also described. Finally, we give predictions for some of the potential applications of plastic over the next 20 years.

  17. Regulatory mechanisms link phenotypic plasticity to evolvability.

    Science.gov (United States)

    van Gestel, Jordi; Weissing, Franz J

    2016-04-18

    Organisms have a remarkable capacity to respond to environmental change. They can either respond directly, by means of phenotypic plasticity, or they can slowly adapt through evolution. Yet, how phenotypic plasticity links to evolutionary adaptability is largely unknown. Current studies of plasticity tend to adopt a phenomenological reaction norm (RN) approach, which neglects the mechanisms underlying plasticity. Focusing on a concrete question - the optimal timing of bacterial sporulation - we here also consider a mechanistic approach, the evolution of a gene regulatory network (GRN) underlying plasticity. Using individual-based simulations, we compare the RN and GRN approach and find a number of striking differences. Most importantly, the GRN model results in a much higher diversity of responsive strategies than the RN model. We show that each of the evolved strategies is pre-adapted to a unique set of unseen environmental conditions. The regulatory mechanisms that control plasticity therefore critically link phenotypic plasticity to the adaptive potential of biological populations.

  18. Anaesthetic complications in plastic surgery.

    Science.gov (United States)

    Nath, Soumya Sankar; Roy, Debashis; Ansari, Farrukh; Pawar, Sundeep T

    2013-05-01

    Anaesthesia related complications in plastic surgeries are fortunately rare, but potentially catastrophic. Maintaining patient safety in the operating room is a major concern of anaesthesiologists, surgeons, hospitals and surgical facilities. Circumventing preventable complications is essential and pressure to avoid these complications in cosmetic surgery is increasing. Key aspects of patient safety in the operating room are outlined, including patient positioning, airway management and issues related to some specific conditions, essential for minimizing post-operative morbidity. Risks associated with extremes of age in the plastic surgery population, may be minimised by a better understanding of the physiologic changes as well as the pre-operative and post-operative considerations in caring for this special group of patients. An understanding of the anaesthesiologist's concerns during paediatric plastic surgical procedures can facilitate the coordination of efforts between the multiple services involved in the care of these children. Finally, the reader will have a better understanding of the perioperative care of unique populations including the morbidly obese and the elderly. Attention to detail in these aspects of patient safety can help avoid unnecessary complication and significantly improve the patients' experience and surgical outcome.

  19. Anaesthetic complications in plastic surgery

    Directory of Open Access Journals (Sweden)

    Soumya Sankar Nath

    2013-01-01

    Full Text Available Anaesthesia related complications in plastic surgeries are fortunately rare, but potentially catastrophic. Maintaining patient safety in the operating room is a major concern of anaesthesiologists, surgeons, hospitals and surgical facilities. Circumventing preventable complications is essential and pressure to avoid these complications in cosmetic surgery is increasing. Key aspects of patient safety in the operating room are outlined, including patient positioning, airway management and issues related to some specific conditions, essential for minimizing post-operative morbidity. Risks associated with extremes of age in the plastic surgery population, may be minimised by a better understanding of the physiologic changes as well as the pre-operative and post-operative considerations in caring for this special group of patients. An understanding of the anaesthesiologist′s concerns during paediatric plastic surgical procedures can facilitate the coordination of efforts between the multiple services involved in the care of these children. Finally, the reader will have a better understanding of the perioperative care of unique populations including the morbidly obese and the elderly. Attention to detail in these aspects of patient safety can help avoid unnecessary complication and significantly improve the patients′ experience and surgical outcome.

  20. Plasticity Approach to Shear Design

    DEFF Research Database (Denmark)

    Hoang, Cao Linh; Nielsen, Mogens Peter

    1998-01-01

    The paper presents some plastic models for shear design of reinforced concrete beams. Distinction is made between two shear failure modes, namely web crushing and crack sliding. The first mentioned mode is met in beams with large shear reinforcement degrees. The mode of crack sliding is met in no...... in uncracked concrete. Good agree between theory and tests has been found.Keywords: dsign, plasticity, reinforced concrete, reinforcement, shear, web crushing.......The paper presents some plastic models for shear design of reinforced concrete beams. Distinction is made between two shear failure modes, namely web crushing and crack sliding. The first mentioned mode is met in beams with large shear reinforcement degrees. The mode of crack sliding is met in non......-shear reinforced beams as well as in lightly shear reinforced beams. For such beams the shear strength is determined by the recently developed crack sliding model. This model is based upon the hypothesis that cracks can be transformed into yield lines, which have lower sliding resistance than yield lines formed...

  1. Stability constants of La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III) and Dy(III) complexes with N-(2-hydroxyphenyl) p-toluene sulphonamide

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, S.C.; Mathur, K.C. (Jodhpur Univ. (India). Dept. of Chemistry)

    1981-01-01

    The dissociation constants of the ligand and stability constants of La(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III) and Dy(III) complexes with N-(2-hydroxyphenyl) p-toluene sulphonamide have been determined potentiometrically using Calvin-Bjerrum pH titration technique at 30 +- 1deg C and ..mu.. = 0.1 M (NaClO/sub 4/) in aqueous medium. The stability constants of these metal complexes are found to follow the order Dy > Tb > Gd > Sm > Nd > Pr > La.

  2. Population III Hypernovae

    CERN Document Server

    Smidt, Joseph; Even, Wesley; Wiggins, Brandon; Johnson, Jarrett L; Fryer, Chris L

    2014-01-01

    Population III supernovae have been of growing interest of late for their potential to directly probe the properties of the first stars, particularly the most energetic events that are visible near the edge of the observable universe. But until now, hypernovae, the unusually energetic Type Ib/c supernovae that are sometimes associated with gamma-ray bursts, have been overlooked as cosmic lighthouses at the highest redshifts. In this, the latest of a series of studies on Population III supernovae, we present numerical simulations of 25 - 50 M$_{\\odot}$ hypernovae and their light curves done with the Los Alamos RAGE and SPECTRUM codes. We find that they will be visible at z = 10 - 15 to the James Webb Space Telescope (JWST) and z = 4 - 5 to the Wide-Field Infrared Survey Telescope (WFIRST), tracing star formation rates in the first galaxies and at the end of cosmological reionization. If, however, the hypernova crashes into a dense shell ejected by its progenitor, a superluminous event will occur that may be se...

  3. POPULATION III HYPERNOVAE

    Energy Technology Data Exchange (ETDEWEB)

    Smidt, Joseph; Whalen, Daniel J. [T-2, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Wiggins, Brandon K. [Department of Physics and Astronomy, Brigham Young University, Provo, UT 84602 (United States); Even, Wesley; Fryer, Chris L. [CCS-2, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Johnson, Jarrett L., E-mail: dwhalen1999@gmail.com [XTD-PRI, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2014-12-20

    Population III supernovae have been of growing interest of late for their potential to directly probe the properties of the first stars, particularly the most energetic events that are visible near the edge of the observable universe. Until now, hypernovae, the unusually energetic Type Ib/c supernovae that are sometimes associated with gamma-ray bursts, have been overlooked as cosmic beacons at the highest redshifts. In this, the latest of a series of studies on Population III supernovae, we present numerical simulations of 25-50 M {sub ☉} hypernovae and their light curves done with the Los Alamos RAGE and SPECTRUM codes. We find that they will be visible at z = 10-15 to the James Webb Space Telescope and z = 4-5 to the Wide-Field Infrared Survey Telescope, tracing star formation rates in the first galaxies and at the end of cosmological reionization. If, however, the hypernova crashes into a dense shell ejected by its progenitor, it is expected that a superluminous event will occur that may be seen at z ∼ 20 in the first generation of stars.

  4. Recycling of plastic waste: Presence of phthalates in plastics from households and industry.

    Science.gov (United States)

    Pivnenko, K; Eriksen, M K; Martín-Fernández, J A; Eriksson, E; Astrup, T F

    2016-08-01

    Plastics recycling has the potential to substitute virgin plastics partially as a source of raw materials in plastic product manufacturing. Plastic as a material may contain a variety of chemicals, some potentially hazardous. Phthalates, for instance, are a group of chemicals produced in large volumes and are commonly used as plasticisers in plastics manufacturing. Potential impacts on human health require restricted use in selected applications and a need for the closer monitoring of potential sources of human exposure. Although the presence of phthalates in a variety of plastics has been recognised, the influence of plastic recycling on phthalate content has been hypothesised but not well documented. In the present work we analysed selected phthalates (DMP, DEP, DPP, DiBP, DBP, BBzP, DEHP, DCHP and DnOP) in samples of waste plastics as well as recycled and virgin plastics. DBP, DiBP and DEHP had the highest frequency of detection in the samples analysed, with 360μg/g, 460μg/g and 2700μg/g as the maximum measured concentrations, respectively. Among other, statistical analysis of the analytical results suggested that phthalates were potentially added in the later stages of plastic product manufacturing (labelling, gluing, etc.) and were not removed following recycling of household waste plastics. Furthermore, DEHP was identified as a potential indicator for phthalate contamination of plastics. Close monitoring of plastics intended for phthalates-sensitive applications is recommended if recycled plastics are to be used as raw material in production.

  5. Biological and Chemical Characterization of a New Larvicide Ovitrap Made of Plastic With Pyriproxyfen Incorporated for Aedes aegypti (Diptera: Culicidae) Control.

    Science.gov (United States)

    Harburguer, Laura; Licastro, Susana; Masuh, Héctor; Zerba, Eduardo

    2016-05-01

    Aedes aegypti (L.) is a species of international concern because of its ability to transmit serious human arboviral diseases including yellow fever, dengue, and chikungunya, which have spread to all continents. Ovitraps are containers constructed to imitate Aedes' natural breeding sites and have been used for many decades as a sensitive and inexpensive surveillance tool for detecting the presence of container-inhabiting mosquitoes. In addition to their value for vector surveillance, various ovitrap devices have been evaluated as tools for suppressing Ae. aegypti populations. In this study, we performed a biological and chemical characterization of a new ovitrap prototype manufactured by injection molding of low-density polyethylene (LDPE) with the larvicide pyriproxyfen. Our research shows that pyriproxyfen was immediately released from the LDPE into the water of the ovitrap and led to an emergence inhibition of 100% for over 30 weeks. In addition, ovitraps continued to show a high larvicidal activity after over 20 washes. Pyriproxyfen was detectable in the water after 20 s and reached a peak after 24 h. Our results show that this ovitrap can be an effective, inexpensive, and low-maintenance tool for Ae. aegypti surveillance and control. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  6. A review of plastic waste biodegradation.

    Science.gov (United States)

    Zheng, Ying; Yanful, Ernest K; Bassi, Amarjeet S

    2005-01-01

    With more and more plastics being employed in human lives and increasing pressure being placed on capacities available for plastic waste disposal, the need for biodegradable plastics and biodegradation of plastic wastes has assumed increasing importance in the last few years. This review looks at the technological advancement made in the development of more easily biodegradable plastics and the biodegradation of conventional plastics by microorganisms. Additives, such as pro-oxidants and starch, are applied in synthetic materials to modify and make plastics biodegradable. Recent research has shown that thermoplastics derived from polyolefins, traditionally considered resistant to biodegradation in ambient environment, are biodegraded following photo-degradation and chemical degradation. Thermoset plastics, such as aliphatic polyester and polyester polyurethane, are easily attacked by microorganisms directly because of the potential hydrolytic cleavage of ester or urethane bonds in their structures. Some microorganisms have been isolated to utilize polyurethane as a sole source of carbon and nitrogen source. Aliphatic-aromatic copolyesters have active commercial applications because of their good mechanical properties and biodegradability. Reviewing published and ongoing studies on plastic biodegradation, this paper attempts to make conclusions on potentially viable methods to reduce impacts of plastic waste on the environment.

  7. Characterization of plastic blends made from mixed plastics waste of different sources.

    Science.gov (United States)

    Turku, Irina; Kärki, Timo; Rinne, Kimmo; Puurtinen, Ari

    2017-02-01

    This paper studies the recyclability of construction and household plastic waste collected from local landfills. Samples were processed from mixed plastic waste by injection moulding. In addition, blends of pure plastics, polypropylene and polyethylene were processed as a reference set. Reference samples with known plastic ratio were used as the calibration set for quantitative analysis of plastic fractions in recycled blends. The samples were tested for the tensile properties; scanning electron microscope-energy-dispersive X-ray spectroscopy was used for elemental analysis of the blend surfaces and Fourier transform infrared (FTIR) analysis was used for the quantification of plastics contents.

  8. Neurotrophic regulation of synapse development and plasticity

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Neurotrophic factors are traditionally thought to be secretory proteins that regulate long-tern survival and differe, ntiation of neurons. Recent studies have revealed a previously unexpected role for these factors in synaptie de velopment ami plasticity in diverse neuronal populations. Here we review experimeuts carried oul in our own laboratory in the last few years.. We have made two important discoveries.First,we were among the first to report that brain-derived. neurotrophie faclor (BDNF) facilitates hippocampal hmg-term potentiation (LTP), a form of synaptic plaslicity believed to be involved in learning and memory. BDNF modulates LTP al CAI synapses by enhaneing synaptic responses to high frequency, tetanic slimulalion. This is achieved primafily by facilitating synaptie vesicle doeking, possibly due to an in crease in the levels of the vesicle prolein synaptobrevin and synaptoplysin in the nerve terminals. Gene knockout study demonstrates thai the effects of BDNF are primarily mediated through presynaptic mechanisms. Second, we demonstrated a form of long-term, neurotrophin-mediated synaptic regulation. We showed that long-term treatment of the neuromuscu lar synapses with neurotrophin-3 (NT3) resulted in an enhancement of both spontaneous and evoked synaptic currcuts, as well as profound changes in thc number of synaptic varicosities and syuaptic vesicle proteins in motoneurons, all of which are indicative of more mature synapses. Our current work addresses the following issues:(i) activity-dependent trafficking of neurotrophin receptors, and its role in synapse-specific modulation; (ii) signal transduction mechanisms medialing the acute enhancement of synaplic transmission by neurotrophins; (iii) acute and long-tenn synaptie actions of the GDNF family; (iv) role of BDNF in late-phase LTP and in the development of hippocampal circuit.

  9. Fast ejendom III

    DEFF Research Database (Denmark)

    Munk-Hansen, Carsten

    Bogen er det tredje bind af tre planlagte bind om fast ejendom: I Overdragelsen, II Bolighandlen og III Ejerbeføjelsen. Fremstillingens giver et grundigt overblik over centrale områder af en omfattende regulering af fast ejendom, med angivelse af litteratur, hvor læseren kan søge yderligere...... oplysning. En ejer af fast ejendom er på særdeles mange områder begrænset i sin råden sammenlignet med ejeren af et formuegode i almindelighed. Fremstillingen tager udgangspunkt i ejerens perspektiv (fremfor samfundets eller myndighedernes). Både den privatretlige og offentligretlige regulering behandles......, eksempelvis ejendomsdannelsen, servitutter, naboretten, hævd, zoneinddelingen, den fysiske planlægning, beskyttelse af natur, beskyttelse af kultur, forurening fra fast ejendom, erstatning for forurening, jordforurening, ekspropriation, byggeri og adgang til fast ejendom....

  10. Ammonium diphosphitoindate(III

    Directory of Open Access Journals (Sweden)

    Farida Hamchaoui

    2013-04-01

    Full Text Available The crystal structure of the title compound, NH4[In(HPO32], is built up from InIII cations (site symmetry 3m. adopting an octahedral environment and two different phosphite anions (each with site symmetry 3m. exhibiting a triangular–pyramidal geometry. Each InO6 octahedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO32]− layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO32]− layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4+ cations and the O atoms of the framework.

  11. Oxymatrinium tetrachloridoferrate(III

    Directory of Open Access Journals (Sweden)

    Xiong He

    2012-02-01

    Full Text Available The asymmetric unit of the title compound, (C15H25N2O2[FeCl4], contains a tetrachloridoferrate(III anion and a oxymatrinium cation [oxymatrine is (4R,7aS,13aR,13bR,13cS-dodecahydro-1H,5H,10H-dipyrido[2,1-f:3′,2′,1′-ij][1,6]naphthyridin-10-one 4-oxide]. The conformation of oxymatrine is similar to that of matrine with one ring having a half-chair conformation, while the others have chair conformations. Chiral chains of cations along the c axis are formed by O—H...O hydrogen bonds.

  12. III.— Documents

    OpenAIRE

    2014-01-01

    III/1 inventaire de l’orangerie du château d’Ivry, 1770 • Inventaire après décès du marquis de Béringhen (extrait), AN M.C. LXXXVIII, 723, 28 février 1770 « [f° 113 v°] Dudit jour samedi seize du présent mois de juin huit heures du matin à même requête qualité et preuve que dessus, ainsi que le tout a été ci-devant établi, va être par les conseillers du roi notaires au Châtelet de Paris [f° 114 r°] soussignés procédé à la continuation du présent inventaire de la manière et ainsi qu’il suit. S...

  13. Pseudo Class III malocclusion.

    Science.gov (United States)

    Al-Hummayani, Fadia M

    2016-04-01

    The treatment of deep anterior crossbite is technically challenging due to the difficulty of placing traditional brackets with fixed appliances. This case report represents a none traditional treatment modality to treat deep anterior crossbite in an adult pseudo class III malocclusion complicated by severely retruded, supraerupted upper and lower incisors. Treatment was carried out in 2 phases. Phase I treatment was performed by removable appliance "modified Hawley appliance with inverted labial bow," some modifications were carried out to it to suit the presented case. Positive overbite and overjet was accomplished in one month, in this phase with minimal forces exerted on the lower incisors. Whereas, phase II treatment was performed with fixed appliances (braces) to align teeth and have proper over bite and overjet and to close posterior open bite, this phase was accomplished within 11 month.

  14. Astronotus ocellatus (Cichlidae: Pisces and Macropodus opercularis (Anabatidae: Pisces as predators of immature Aedes fluviatilis (Diptera: Culicidae and Biomphalaria glabrata (Mollusca: Planorbidae

    Directory of Open Access Journals (Sweden)

    Rotraut A. G. B. Consoli

    1991-12-01

    Full Text Available Two fish species, Astronotus ocellatus (Cichlidae and Macropodus opercularis (Anabatidae were tested for predacious behavior toward immature mosquitoes (Aedes fluviatili9s, Diptera: Culicidae and schistosomiasis snail hosts (Biomphalaria glabrata, Mollusca: Planorbidae, in the presence or absence of non-living food and laboratory conditions. A. ocellatus, a species indigenous to Brazil, was a very efficient predator of both organisms (alpha=1,05; M. operculatis, an exotic species, preyed well on immature mosquitoes, but small snails and snail egg-masses were ingested only irregulary. Both fish species seemed to prefer live to non-living food.

  15. SITUACIÓN ACTUAL EN ESPAÑA Y ECO-EPIDEMIOLOGÍA DE LAS ARBOVIROSIS TRANSMITIDAS POR MOSQUITOS CULÍCIDOS (DIPTERA: CULICIDAE)

    OpenAIRE

    Rubén Bueno Marí; Ricardo Jiménez Peydró

    2010-01-01

    En el presente manuscrito se analiza la posible emergencia y/o reemergencia en España de algunas de las arbovirosis transmitidas por mosquitos culícidos (Diptera: Culicidae) de mayor incidencia a nivel mundial en los últimos años. Los datos faunísticos, bioecológicos y de distribución de los culícidos en nuestro país permiten discernir entre especies con capacidad de mantener la enzootia de algunas de estas arbovirosis de otras que pueden actuar como vectores puente de la virosis hasta el ser...

  16. "Oriental anthropometry" in plastic surgery

    Directory of Open Access Journals (Sweden)

    Senna-Fernandes Vasco

    2008-01-01

    Full Text Available Background : According to Chinese medicine, the acupuncture-points′ (acupoints locations are proportionally and symmetrically distributed in well-defined compartment zones on the human body surface Oriental Anthropometry" (OA. Acupoints, if considered as aesthetic-loci, might be useful as reference guides in plastic surgery (PS. Aim: This study aimed to use aesthetic-loci as anatomical reference in surgical marking of Aesthetic Plastic Surgery. Method: This was an observational study based on aesthetic surgeries performed in private clinic. This study was based on 106 cases, comprising of 102 women and 4 men, with ages varying from 07 to 73 years, and with heights of between 1.34 m and 1.80 m. Patients were submitted to aesthetic surgical planning by relating aesthetic-loci to conventional surgical marking, including breast surgeries, abdominoplasty, rhytidoplasty, blepharoplasty, and hair implant. The aesthetic-surgical-outcome (ASO of the patients was assessed by a team of plastic surgeons (who were not involved in the surgical procedures over a follow-up period of one year by using a numeric-rating-scale in percentage (% terms. A four-point-verbal-rating-scale was used to record the patients′ opinion of therapeutic-satisfaction (TS. Results: ASO was 75.3 ± 9.4% and TS indicated that most patients (58.5% obtained "good" results. Of the remainder, 38.7% found the results "excellent", and 2.8% found them "fair". Discussion and Conclusion : The data suggested that the use of aesthetic-loci may be a useful tool for PS as an anatomical reference for surgical marking. However, further investigation is required to assess the efficacy of the OA by providing the patients more reliable balance and harmony in facial and body contours surgeries.

  17. Glassy features of crystal plasticity

    Science.gov (United States)

    Lehtinen, Arttu; Costantini, Giulio; Alava, Mikko J.; Zapperi, Stefano; Laurson, Lasse

    2016-08-01

    Crystal plasticity occurs by deformation bursts due to the avalanchelike motion of dislocations. Here we perform extensive numerical simulations of a three-dimensional dislocation dynamics model under quasistatic stress-controlled loading. Our results show that avalanches are power-law distributed and display peculiar stress and sample size dependence: The average avalanche size grows exponentially with the applied stress, and the amount of slip increases with the system size. These results suggest that intermittent deformation processes in crystalline materials exhibit an extended critical-like phase in analogy to glassy systems instead of originating from a nonequilibrium phase transition critical point.

  18. Semiconducting III-V compounds

    CERN Document Server

    Hilsum, C; Henisch, Heinz R

    1961-01-01

    Semiconducting III-V Compounds deals with the properties of III-V compounds as a family of semiconducting crystals and relates these compounds to the monatomic semiconductors silicon and germanium. Emphasis is placed on physical processes that are peculiar to III-V compounds, particularly those that combine boron, aluminum, gallium, and indium with phosphorus, arsenic, and antimony (for example, indium antimonide, indium arsenide, gallium antimonide, and gallium arsenide).Comprised of eight chapters, this book begins with an assessment of the crystal structure and binding of III-V compounds, f

  19. Constraints on the evolution of phenotypic plasticity: limits and costs of phenotype and plasticity.

    Science.gov (United States)

    Murren, C J; Auld, J R; Callahan, H; Ghalambor, C K; Handelsman, C A; Heskel, M A; Kingsolver, J G; Maclean, H J; Masel, J; Maughan, H; Pfennig, D W; Relyea, R A; Seiter, S; Snell-Rood, E; Steiner, U K; Schlichting, C D

    2015-10-01

    Phenotypic plasticity is ubiquitous and generally regarded as a key mechanism for enabling organisms to survive in the face of environmental change. Because no organism is infinitely or ideally plastic, theory suggests that there must be limits (for example, the lack of ability to produce an optimal trait) to the evolution of phenotypic plasticity, or that plasticity may have inherent significant costs. Yet numerous experimental studies have not detected widespread costs. Explicitly differentiating plasticity costs from phenotype costs, we re-evaluate fundamental questions of the limits to the evolution of plasticity and of generalists vs specialists. We advocate for the view that relaxed selection and variable selection intensities are likely more important constraints to the evolution of plasticity than the costs of plasticity. Some forms of plasticity, such as learning, may be inherently costly. In addition, we examine opportunities to offset costs of phenotypes through ontogeny, amelioration of phenotypic costs across environments, and the condition-dependent hypothesis. We propose avenues of further inquiry in the limits of plasticity using new and classic methods of ecological parameterization, phylogenetics and omics in the context of answering questions on the constraints of plasticity. Given plasticity's key role in coping with environmental change, approaches spanning the spectrum from applied to basic will greatly enrich our understanding of the evolution of plasticity and resolve our understanding of limits.

  20. Evolution of environmental cues for phenotypic plasticity.

    Science.gov (United States)

    Chevin, Luis-Miguel; Lande, Russell

    2015-10-01

    Phenotypically plastic characters may respond to multiple variables in their environment, but the evolutionary consequences of this phenomenon have rarely been addressed theoretically. We model the evolution of linear reaction norms in response to several correlated environmental variables, in a population undergoing stationary environmental fluctuations. At evolutionary equilibrium, the linear combination of environmental variables that acts as a developmental cue for the plastic trait is the multivariate best linear predictor of changes in the optimum. However, the reaction norm with respect to any single environmental variable may exhibit nonintuitive patterns. Apparently maladaptive, or hyperadaptive plasticity can evolve with respect to single environmental variables, and costs of plasticity may increase, rather than reduce, plasticity in response to some variables. We also find conditions for the evolution of an indirect environmental indicator that affects expression of a plastic phenotype, despite not influencing natural selection on it.

  1. River plastic emissions to the world's oceans

    Science.gov (United States)

    Lebreton, Laurent C. M.; van der Zwet, Joost; Damsteeg, Jan-Willem; Slat, Boyan; Andrady, Anthony; Reisser, Julia

    2017-06-01

    Plastics in the marine environment have become a major concern because of their persistence at sea, and adverse consequences to marine life and potentially human health. Implementing mitigation strategies requires an understanding and quantification of marine plastic sources, taking spatial and temporal variability into account. Here we present a global model of plastic inputs from rivers into oceans based on waste management, population density and hydrological information. Our model is calibrated against measurements available in the literature. We estimate that between 1.15 and 2.41 million tonnes of plastic waste currently enters the ocean every year from rivers, with over 74% of emissions occurring between May and October. The top 20 polluting rivers, mostly located in Asia, account for 67% of the global total. The findings of this study provide baseline data for ocean plastic mass balance exercises, and assist in prioritizing future plastic debris monitoring and mitigation strategies.

  2. Tunable plasticity in amorphous silicon carbide films.

    Science.gov (United States)

    Matsuda, Yusuke; Kim, Namjun; King, Sean W; Bielefeld, Jeff; Stebbins, Jonathan F; Dauskardt, Reinhold H

    2013-08-28

    Plasticity plays a crucial role in the mechanical behavior of engineering materials. For instance, energy dissipation during plastic deformation is vital to the sufficient fracture resistance of engineering materials. Thus, the lack of plasticity in brittle hybrid organic-inorganic glasses (hybrid glasses) often results in a low fracture resistance and has been a significant challenge for their integration and applications. Here, we demonstrate that hydrogenated amorphous silicon carbide films, a class of hybrid glasses, can exhibit a plasticity that is even tunable by controlling their molecular structure and thereby leads to an increased and adjustable fracture resistance in the films. We decouple the plasticity contribution from the fracture resistance of the films by estimating the "work-of-fracture" using a mean-field approach, which provides some insight into a potential connection between the onset of plasticity in the films and the well-known rigidity percolation threshold.

  3. Environmental evaluation of plastic waste management scenarios

    DEFF Research Database (Denmark)

    Rigamonti, L.; Grosso, M.; Møller, Jacob

    2014-01-01

    The management of the plastic fraction is one of the most debated issues in the discussion on integrated municipal solid waste systems. Both material and energy recovery can be performed on such a waste stream, and different separate collection schemes can be implemented. The aim of the paper...... is to contribute to the debate, based on the analysis of different plastic waste recovery routes. Five scenarios were defined and modelled with a life cycle assessment approach using the EASEWASTE model. In the baseline scenario (P0) the plastic is treated as residual waste and routed partly to incineration...... with energy recovery and partly to mechanical biological treatment. A range of potential improvements in plastic management is introduced in the other four scenarios (P1–P4). P1 includes a source separation of clean plastic fractions for material recycling, whereas P2 a source separation of mixed plastic...

  4. Degradation of Oxo-Biodegradable Plastic by Pleurotus ostreatus

    OpenAIRE

    José Maria Rodrigues da Luz; Sirlaine Albino Paes; Mateus Dias Nunes; Marliane de Cássia Soares da Silva; Maria Catarina Megumi Kasuya

    2013-01-01

    Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ul...

  5. Degradation of Oxo-Biodegradable Plastic by Pleurotus ostreatus

    OpenAIRE

    José Maria Rodrigues da Luz; Sirlaine Albino Paes; Mateus Dias Nunes; Marliane de Cássia Soares da Silva; Maria Catarina Megumi Kasuya

    2013-01-01

    Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ul...

  6. Aedes aegypti (Diptera: Culicidae) biting deterrence: structure-activity relationship of saturated and unsaturated fatty acids.

    Science.gov (United States)

    Ali, Abbas; Cantrell, Charles L; Bernier, Ulrich R; Duke, Stephen O; Schneider, John C; Agramonte, Natasha M; Khan, Ikhlas

    2012-11-01

    In this study we evaluated the biting deterrent effects of a series of saturated and unsaturated fatty acids against Aedes aegypti (L), yellow fever mosquito (Diptera: Culicidae) using the K & Dbioassay module system. Saturated (C6:0 to C16:0 and C18:0) and unsaturated fatty acids (C11:1 to C14:1, C16:1, C18:1, and C18:2) showed biting deterrence index (BDI) values significantly greater than ethanol, the negative control. Among the saturated fatty acids, mid chain length acids (C10:0 to C13:0) showed higher biting deterrence than short (C6:0 to C9:0) and long chain length acids (C14:0 to C18:0), except for C8:0 and C16:0 that were more active than the other short and long chain acids. The BDI values of mid chain length acids (C10:0 to C13:0) were not significantly less than N, N-diethyl-meta-toluamide (DEET), the positive control. Among the unsaturated fatty acids, C11:1 showed the highest activity (BDI = 1.05) and C18:2 had the lowest activity (BDI = 0.7). In C11:1, C12:1, and C14:1 BDI values were not significantly less than DEET. After the preliminary observations, residual activity bioassays were performed on C11:0, C12:0, C11:1, and C12:1 over a 24-h period. All the fatty acids (C11:0, C12:0, C11:1, and C12:1) and DEET showed significantly higher activity at all test intervals than the solvent control. At treatment and 1-h posttreatment, all fatty acids showed proportion not biting (PNB) values not significantly less than DEET. At 3-, 6-, and 12-h posttreatment, all fatty acids showed PNB values significantly greater than DEET. At 24-h posttreatment, only the PNB value for C12:0 was significantly higher than DEET. The dose-responses of C12:0 and DEET were determined at concentrations of 5-25 nmol/cm2. As in the residual activity bioassays, the PNB values for C12:0 and DEET at 25 nmol/cm(2) were not significantly different. However, at lower concentrations, the PNB values for C12:0 were significantly greater than DEET. These results clearly indicate that mid

  7. Phenotypic plasticity and diversity in insects

    OpenAIRE

    Moczek, Armin P.

    2010-01-01

    Phenotypic plasticity in general and polyphenic development in particular are thought to play important roles in organismal diversification and evolutionary innovation. Focusing on the evolutionary developmental biology of insects, and specifically that of horned beetles, I explore the avenues by which phenotypic plasticity and polyphenic development have mediated the origins of novelty and diversity. Specifically, I argue that phenotypic plasticity generates novel targets for evolutionary pr...

  8. Plastic Recycling Experiments in Materials Education

    Science.gov (United States)

    Liu, Ping; Waskom, Tommy L.

    1996-01-01

    The objective of this project was to introduce a series of plastic recycling experiments to students in materials-related courses such as materials science, material technology and materials testing. With the plastic recycling experiments, students not only can learn the fundamentals of plastic processing and properties as in conventional materials courses, but also can be exposed to the issue of materials life cycle and the impact on society and environment.

  9. Studies of elastic-plastic instabilities

    DEFF Research Database (Denmark)

    Tvergaard, Viggo

    1999-01-01

    Analyses of plastic instabilities are reviewed, with focus on results in structural mechanics as well as continuum mechanics. First the basic theories for bifurcation and post-bifurcation behavior are briefly presented. Then, localization of plastic flow is discussed, including shear band formation...... in solids, localized necking in biaxially stretched metal sheets, and the analogous phenomenon of buckling localization in structures. Also some recent results for cavitation instabilities in elastic-plastic solids are reviewed....

  10. Biobased additive plasticizing Polylactic acid (PLA

    Directory of Open Access Journals (Sweden)

    Mounira Maiza

    2015-12-01

    Full Text Available Polylactic acid (PLA is an attractive candidate for replacing petrochemical polymers because it is from renewable resources. In this study, a specific PLA 2002D was melt-mixed with two plasticizers: triethyl citrate (TEC and acetyl tributyl citrate (ATBC. The plasticized PLA with various concentrations were analyzed by differential scanning calorimetry (DSC, dynamic mechanical analysis (DMA, melt flow index (MFI, thermogravimetric analysis (TGA, X-ray diffraction (XRD, UV-Visible spectroscopy and plasticizer migration test. Differential scanning calorimetry demonstrated that the addition of TEC and ATBC resulted in a decrease in glass transition temperature (Tg, and the reduction was the largest with the plasticizer having the lowest molecular weight (TEC. Plasticizing effect was also shown by decrease in the dynamic storage modulus and viscosity of plasticized mixtures compared to the treated PLA. The TGA results indicated that ATBC and TEC promoted a decrease in thermal stability of the PLA. The X-ray diffraction showed that the PLA have not polymorphic crystalline transition. Analysis by UV-Visible spectroscopy showed that the two plasticizers: ATBC and TEC have no effect on the color change of the films. The weight loss plasticizer with heating time and at 100°C is lesser than at 135 °C. Migration of TEC and ATBC results in cracks and changed color of material. We have concluded that the higher molecular weight of citrate in the studied exhibited a greater plasticizing effect to the PLA.

  11. Neuronal plasticity: beyond the critical period.

    Science.gov (United States)

    Hübener, Mark; Bonhoeffer, Tobias

    2014-11-06

    Neuronal plasticity in the brain is greatly enhanced during critical periods early in life and was long thought to be rather limited thereafter. Studies in primary sensory areas of the neocortex have revealed a substantial degree of plasticity in the mature brain, too. Often, plasticity in the adult neocortex lies dormant but can be reactivated by modifications of sensory input or sensory-motor interactions, which alter the level and pattern of activity in cortical circuits. Such interventions, potentially in combination with drugs targeting molecular brakes on plasticity present in the adult brain, might help recovery of function in the injured or diseased brain.

  12. Neuronal cytoskeleton in synaptic plasticity and regeneration.

    Science.gov (United States)

    Gordon-Weeks, Phillip R; Fournier, Alyson E

    2014-04-01

    During development, dynamic changes in the axonal growth cone and dendrite are necessary for exploratory movements underlying initial axo-dendritic contact and ultimately the formation of a functional synapse. In the adult central nervous system, an impressive degree of plasticity is retained through morphological and molecular rearrangements in the pre- and post-synaptic compartments that underlie the strengthening or weakening of synaptic pathways. Plasticity is regulated by the interplay of permissive and inhibitory extracellular cues, which signal through receptors at the synapse to regulate the closure of critical periods of developmental plasticity as well as by acute changes in plasticity in response to experience and activity in the adult. The molecular underpinnings of synaptic plasticity are actively studied and it is clear that the cytoskeleton is a key substrate for many cues that affect plasticity. Many of the cues that restrict synaptic plasticity exhibit residual activity in the injured adult CNS and restrict regenerative growth by targeting the cytoskeleton. Here, we review some of the latest insights into how cytoskeletal remodeling affects neuronal plasticity and discuss how the cytoskeleton is being targeted in an effort to promote plasticity and repair following traumatic injury in the central nervous system. © 2013 International Society for Neurochemistry.

  13. Biodegradable and compostable alternatives to conventional plastics

    National Research Council Canada - National Science Library

    J. H. Song; R. J. Murphy; R. Narayan; G. B. H. Davies

    2009-01-01

    .... Recently, significant progress has been made in the development of biodegradable plastics, largely from renewable natural resources, to produce biodegradable materials with similar functionality...

  14. Extruded plastic scintillator for MINERvA

    Energy Technology Data Exchange (ETDEWEB)

    Pla-Dalmau, Anna; Bross, Alan D.; /Fermilab; Rykalin, Victor V.; Wood, Brian M.; /NICADD, DeKalb

    2005-11-01

    An extrusion line has recently been installed at Fermilab in collaboration with NICADD (Northern Illinois Center for Accelerator and Detector Development). This new facility will serve to further develop and improve extruded plastic scintillator. Since polystyrene is widely used in the consumer industry, the logical path was to investigate the extrusion of commercial-grade polystyrene pellets with dopants to yield high quality plastic scintillator. The D0 and MINOS experiments are already using extruded scintillator strips in their detectors. A new experiment at Fermilab is pursuing the use of extruded plastic scintillator. A new plastic scintillator strip is being tested and its properties characterized. The initial results are presented here.

  15. Phenotypic plasticity: molecular mechanisms and adaptive significance.

    Science.gov (United States)

    Kelly, Scott A; Panhuis, Tami M; Stoehr, Andrew M

    2012-04-01

    Phenotypic plasticity can be broadly defined as the ability of one genotype to produce more than one phenotype when exposed to different environments, as the modification of developmental events by the environment, or as the ability of an individual organism to alter its phenotype in response to changes in environmental conditions. Not surprisingly, the study of phenotypic plasticity is innately interdisciplinary and encompasses aspects of behavior, development, ecology, evolution, genetics, genomics, and multiple physiological systems at various levels of biological organization. From an ecological and evolutionary perspective, phenotypic plasticity may be a powerful means of adaptation and dramatic examples of phenotypic plasticity include predator avoidance, insect wing polymorphisms, the timing of metamorphosis in amphibians, osmoregulation in fishes, and alternative reproductive tactics in male vertebrates. From a human health perspective, documented examples of plasticity most commonly include the results of exercise, training, and/or dieting on human morphology and physiology. Regardless of the discipline, phenotypic plasticity has increasingly become the target of a plethora of investigations with the methodological approaches utilized ranging from the molecular to whole organsimal. In this article, we provide a brief historical outlook on phenotypic plasticity; examine its potential adaptive significance; emphasize recent molecular approaches that provide novel insight into underlying mechanisms, and highlight examples in fishes and insects. Finally, we highlight examples of phenotypic plasticity from a human health perspective and underscore the use of mouse models as a powerful tool in understanding the genetic architecture of phenotypic plasticity.

  16. Interaction between vegetable oil based plasticizer molecules and polyvinyl chloride, and their plasticization effect

    Science.gov (United States)

    Haryono, Agus; Triwulandari, Evi; Jiang, Pingping

    2017-01-01

    Plasticizer molecules are low molecular weight compounds that are widely used in polymer industries especially in polyvinyl chloride (PVC) resin. As an additive in PVC resin, the important role of plasticizer molecules is to improve the flexibility and processability of PVC by lowering the glass transition temperature (Tg). However, the commercial plasticizer like di(2-ethylhexyl)phthalate (DEHP) is known to cause liver cancer, at least in laboratory rats. DEHP can leach out from PVC into blood, certain drug solutions and fatty foods, which has been detected in the bloodstream of patients undergoing transfusion. Vegetable oil based plasticizers have some attractive properties such as non-toxic, bio-degradable, good heat and light stability, renewable resources, and environmentally friendly. Here we discussed the main results and development of vegetable oil based plasticizer, and especially palm oil based plasticizer. The interaction between plasticizer and polymer was discussed from the properties of the plasticized polymeric material.

  17. The plasticity of social emotions.

    Science.gov (United States)

    Klimecki, Olga M

    2015-01-01

    Social emotions such as empathy or compassion greatly facilitate our interactions with others. Despite the importance of social emotions, scientific studies have only recently revealed functional neural plasticity associated with the training of such emotions. Using the framework of two antagonistic neural systems, the threat and social disconnection system on the one hand, and the reward and social connection system on the other, this article describes how training compassion and empathy can change the functioning of these systems in a targeted manner. Whereas excessive empathic sharing of suffering can increase negative feelings and activations in the insula and anterior cingulate cortex (corresponding to the threat and social disconnection system), compassion training can strengthen positive affect and neural activations in the medial orbitofrontal cortex and striatum (corresponding to the reward and social connection system). These neuroimaging findings are complemented by results from behavioral studies showing that compassion is linked to helping and forgiveness behavior, whereas empathic distress not only decreases helping behavior, but is even associated with increased aggressive behavior. Taken together, these data provide encouraging evidence for the plasticity of adaptive social emotions with wide-ranging implications for basic science and applied settings.

  18. Astrocyte-Synapse Structural Plasticity

    Directory of Open Access Journals (Sweden)

    Yann Bernardinelli

    2014-01-01

    Full Text Available The function and efficacy of synaptic transmission are determined not only by the composition and activity of pre- and postsynaptic components but also by the environment in which a synapse is embedded. Glial cells constitute an important part of this environment and participate in several aspects of synaptic functions. Among the glial cell family, the roles played by astrocytes at the synaptic level are particularly important, ranging from the trophic support to the fine-tuning of transmission. Astrocytic structures are frequently observed in close association with glutamatergic synapses, providing a morphological entity for bidirectional interactions with synapses. Experimental evidence indicates that astrocytes sense neuronal activity by elevating their intracellular calcium in response to neurotransmitters and may communicate with neurons. The precise role of astrocytes in regulating synaptic properties, function, and plasticity remains however a subject of intense debate and many aspects of their interactions with neurons remain to be investigated. A particularly intriguing aspect is their ability to rapidly restructure their processes and modify their coverage of the synaptic elements. The present review summarizes some of these findings with a particular focus on the mechanisms driving this form of structural plasticity and its possible impact on synaptic structure and function.

  19. Phenotypic plasticity in bacterial plasmids.

    Science.gov (United States)

    Turner, Paul E

    2004-01-01

    Plasmid pB15 was previously shown to evolve increased horizontal (infectious) transfer at the expense of reduced vertical (intergenerational) transfer and vice versa, a key trade-off assumed in theories of parasite virulence. Whereas the models predict that susceptible host abundance should determine which mode of transfer is selectively favored, host density failed to mediate the trade-off in pB15. One possibility is that the plasmid's transfer deviates from the assumption that horizontal spread (conjugation) occurs in direct proportion to cell density. I tested this hypothesis using Escherichia coli/pB15 associations in laboratory serial culture. Contrary to most models of plasmid transfer kinetics, my data show that pB15 invades static (nonshaking) bacterial cultures only at intermediate densities. The results can be explained by phenotypic plasticity in traits governing plasmid transfer. As cells become more numerous, the plasmid's conjugative transfer unexpectedly declines, while the trade-off between transmission routes causes vertical transfer to increase. Thus, at intermediate densities the plasmid's horizontal transfer can offset selection against plasmid-bearing cells, but at high densities pB15 conjugates so poorly that it cannot invade. I discuss adaptive vs. nonadaptive causes for the phenotypic plasticity, as well as potential mechanisms that may lead to complex transfer dynamics of plasmids in liquid environments. PMID:15166133

  20. PLASTIC SCINTILLATOR FOR RADIATION DOSIMETRY.

    Science.gov (United States)

    Kim, Yewon; Yoo, Hyunjun; Kim, Chankyu; Lim, Kyung Taek; Moon, Myungkook; Kim, Jongyul; Cho, Gyuseong

    2016-09-01

    Inorganic scintillators, composed of high-atomic-number materials such as the CsI(Tl) scintillator, are commonly used in commercially available a silicon diode and a scintillator embedded indirect-type electronic personal dosimeters because the light yield of the inorganic scintillator is higher than that of an organic scintillator. However, when it comes to tissue-equivalent dose measurements, a plastic scintillator such as polyvinyl toluene (PVT) is a more appropriate material than an inorganic scintillator because of the mass energy absorption coefficient. To verify the difference in the absorbed doses for each scintillator, absorbed doses from the energy spectrum and the calculated absorbed dose were compared. From the results, the absorbed dose of the plastic scintillator was almost the same as that of the tissue for the overall photon energy. However, in the case of CsI, it was similar to that of the tissue only for a photon energy from 500 to 4000 keV. Thus, the values and tendency of the mass energy absorption coefficient of the PVT are much more similar to those of human tissue than those of the CsI. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  1. Network-timing-dependent plasticity

    Directory of Open Access Journals (Sweden)

    Vincent eDelattre

    2015-06-01

    Full Text Available Bursts of activity in networks of neurons are thought to convey salient information and drive synaptic plasticity. Here we report that network bursts also exert a profound effect on Spike-Timing-Dependent Plasticity (STDP. In acute slices of juvenile rat somatosensory cortex we paired a network burst, which alone induced long-term depression (LTD, with STDP-induced long-term potentiation and depression (LTP and LTD. We observed that STDP-induced LTP was either unaffected, blocked or flipped into LTD by the network burst, and that STDP-induced LTD was either saturated or flipped into LTP, depending on the relative timing of the network burst with respect to spike coincidences of the STDP event. We hypothesized that network bursts flip STDP-induced LTP to LTD by depleting resources needed for LTP and therefore developed a resource-dependent STDP learning rule. In a model neural network under the influence of the proposed resource-dependent STDP rule, we found that excitatory synaptic coupling was homeostatically regulated to produce power law distributed burst amplitudes reflecting self-organized criticality, a state that ensures optimal information coding.

  2. Network-timing-dependent plasticity.

    Science.gov (United States)

    Delattre, Vincent; Keller, Daniel; Perich, Matthew; Markram, Henry; Muller, Eilif B

    2015-01-01

    Bursts of activity in networks of neurons are thought to convey salient information and drive synaptic plasticity. Here we report that network bursts also exert a profound effect on Spike-Timing-Dependent Plasticity (STDP). In acute slices of juvenile rat somatosensory cortex we paired a network burst, which alone induced long-term depression (LTD), with STDP-induced long-term potentiation (LTP) and LTD. We observed that STDP-induced LTP was either unaffected, blocked or flipped into LTD by the network burst, and that STDP-induced LTD was either saturated or flipped into LTP, depending on the relative timing of the network burst with respect to spike coincidences of the STDP event. We hypothesized that network bursts flip STDP-induced LTP to LTD by depleting resources needed for LTP and therefore developed a resource-dependent STDP learning rule. In a model neural network under the influence of the proposed resource-dependent STDP rule, we found that excitatory synaptic coupling was homeostatically regulated to produce power law distributed burst amplitudes reflecting self-organized criticality, a state that ensures optimal information coding.

  3. [Galactorrhea after mammary plastic surgery].

    Science.gov (United States)

    Inguenault, C; Capon-Degardin, N; Martinot-Duquennoy, V; Pellerin, P

    2005-04-01

    Galactorrhoea is a complication rarely observed after mammary plastic surgery. Our experience in the domain extends to three clinical cases - two after prosthetic insertion and one after breast reduction - wich will be presented here. The origin of this complication is uncertain. Nevertheless, it is likely to be multifocal, as surgery alone is not the only cause. Postsurgical galactorrhoea often follows a benign course culminating in spontaneous resolution. However, it may reveal the presence of o prolactin secreting adenoma, as was the case with one of our patients. A detailed history, exploring antecedent factors, is an essential step in guiding subsequent management. When faced with postsurgical galactorrhoea, serum prolactin levels should be measured. If serum prolactin levels exceed 150 ng/ml further investigation by way of an MRI of the sella turcica is advisable to rule out pituitary adenoma. Depending on symptom severity, treatment may be medical with the prescription of dopaminergic agonists, and/or surgical with drainage or removal of prostheses. Increased awareness of galactorrhea as a possible complication of plastic surgery to the breast will improve management.

  4. Melting the Plastic Ceiling: Overcoming Obstacles to Foster Leadership in Women Plastic Surgeons.

    Science.gov (United States)

    Silva, Amanda K; Preminger, Aviva; Slezak, Sheri; Phillips, Linda G; Johnson, Debra J

    2016-09-01

    The underrepresentation of women leaders in plastic surgery echoes a phenomenon throughout society. The importance of female leadership is presented, and barriers to gender equality in plastic surgery, both intrinsic and extrinsic, are discussed. Strategies for fostering women in leadership on an individual level and for the specialty of plastic surgery are presented.

  5. Biodegradation of plastics in soil and effects on nitrification activity. A laboratory approach.

    Science.gov (United States)

    Bettas Ardisson, Giulia; Tosin, Maurizio; Barbale, Marco; Degli-Innocenti, Francesco

    2014-01-01

    The progressive application of new biodegradable plastics in agriculture calls for improved testing approaches to assure their environmental safety. Full biodegradation (≥90%) prevents accumulation in soil, which is the first tier of testing. The application of specific ecotoxicity tests is the second tier of testing needed to show safety for the soil ecosystem. Soil microbial nitrification is widely used as a bioindicator for evaluating the impact of chemicals on soil but it is not applied for evaluating the impact of biodegradable plastics. In this work the International Standard test for biodegradation of plastics in soil (ISO 17556, 2012) was applied both to measure biodegradation and to prepare soil samples needed for a subsequent nitrification test based on another International Standard (ISO 14238, 2012). The plastic mulch film tested in this work showed full biodegradability and no inhibition of the nitrification potential of the soil in comparison with the controls. The laboratory approach suggested in this Technology Report enables (i) to follow the course of biodegradation, (ii) a strict control of variables and environmental conditions, (iii) the application of very high concentrations of test material (to maximize the possible effects). This testing approach could be taken into consideration in improved testing schemes aimed at defining the biodegradability of plastics in soil.

  6. Biodegradation of plastics in soil and effects on nitrification activity. A laboratory approach.

    Directory of Open Access Journals (Sweden)

    Giulia eBettas Ardisson

    2014-12-01

    Full Text Available The progressive application of new biodegradable plastics in agriculture calls for improved testing approaches to assure their environmental safety. Full biodegradation (≥ 90% prevents accumulation in soil, which is the first tier of testing. The application of specific ecotoxicity tests is the second tier of testing needed to show safety for the soil ecosystem. Soil microbial nitrification is widely used as a bioindicator for evaluating the impact of chemicals on soil but it is not applied for evaluating the impact of biodegradable plastics. In this work the International Standard test for biodegradation of plastics in soil (ISO 17556, 2012 was applied both to measure biodegradation and to prepare soil samples needed for a subsequent nitrification test based on another International Standard (ISO 14238, 2012. The plastic mulch film tested in this work showed full biodegradability and no inhibition of the nitrification potential of the soil in comparison with the controls. The laboratory approach suggested in this Technology Report enables (i to follow the course of biodegradation, (ii a strict control of variables and environmental conditions, (iii the application of very high concentrations of test material (to maximize the possible effects. This testing approach could be taken into consideration in improved testing schemes aimed at defining the biodegradability of plastics in soil.

  7. Biodegradation of plastics in soil and effects on nitrification activity. A laboratory approach

    Science.gov (United States)

    Bettas Ardisson, Giulia; Tosin, Maurizio; Barbale, Marco; Degli-Innocenti, Francesco

    2014-01-01

    The progressive application of new biodegradable plastics in agriculture calls for improved testing approaches to assure their environmental safety. Full biodegradation (≥90%) prevents accumulation in soil, which is the first tier of testing. The application of specific ecotoxicity tests is the second tier of testing needed to show safety for the soil ecosystem. Soil microbial nitrification is widely used as a bioindicator for evaluating the impact of chemicals on soil but it is not applied for evaluating the impact of biodegradable plastics. In this work the International Standard test for biodegradation of plastics in soil (ISO 17556, 2012) was applied both to measure biodegradation and to prepare soil samples needed for a subsequent nitrification test based on another International Standard (ISO 14238, 2012). The plastic mulch film tested in this work showed full biodegradability and no inhibition of the nitrification potential of the soil in comparison with the controls. The laboratory approach suggested in this Technology Report enables (i) to follow the course of biodegradation, (ii) a strict control of variables and environmental conditions, (iii) the application of very high concentrations of test material (to maximize the possible effects). This testing approach could be taken into consideration in improved testing schemes aimed at defining the biodegradability of plastics in soil. PMID:25566223

  8. Motor cortical plasticity in Parkinson's disease.

    Science.gov (United States)

    Udupa, Kaviraja; Chen, Robert

    2013-09-04

    In Parkinson's disease (PD), there are alterations of the basal ganglia (BG) thalamocortical networks, primarily due to degeneration of nigrostriatal dopaminergic neurons. These changes in subcortical networks lead to plastic changes in primary motor cortex (M1), which mediates cortical motor output and is a potential target for treatment of PD. Studies investigating the motor cortical plasticity using non-invasive transcranial magnetic stimulation (TMS) have found altered plasticity in PD, but there are inconsistencies among these studies. This is likely because plasticity depends on many factors such as the extent of dopaminergic loss and disease severity, response to dopaminergic replacement therapies, development of l-DOPA-induced dyskinesias (LID), the plasticity protocol used, medication, and stimulation status in patients treated with deep brain stimulation (DBS). The influences of LID and DBS on BG and M1 plasticity have been explored in animal models and in PD patients. In addition, many other factors such age, genetic factors (e.g., brain derived neurotropic factor and other neurotransmitters or receptors polymorphism), emotional state, time of the day, physical fitness have been documented to play role in the extent of plasticity induced by TMS in human studies. In this review, we summarize the studies that investigated M1 plasticity in PD and demonstrate how these afore-mentioned factors affect motor cortical plasticity in PD. We conclude that it is important to consider the clinical, demographic, and technical factors that influence various plasticity protocols while developing these protocols as diagnostic or prognostic tools in PD. We also discuss how the modulation of cortical excitability and the plasticity with these non-invasive brain stimulation techniques facilitate the understanding of the pathophysiology of PD and help design potential therapeutic possibilities in this disorder.

  9. Biological activity of selected Lamiaceae and Zingiberaceae plant essential oils against the dengue vector Aedes aegypti L. (Diptera: Culicidae).

    Science.gov (United States)

    Kalaivani, Kandaswamy; Senthil-Nathan, Sengottayan; Murugesan, Arunachalam Ganesan

    2012-03-01

    The larvicidal activity of hydrodistillate extracts from Mentha piperita L. Ocimum basilicum L. Curcuma longa L. and Zingiber officinale L. were investigated against the dengue vector Aedes aegypti L. (Diptera: Culicidae).The results indicated that the mortality rates at 80, 100, 200 and 400 ppm of M. piperita, Z. officinale, C. longa and O. basilicum concentrations were highest amongst all concentrations of the crude extracts tested against all the larval instars and pupae of A. aegypti. Result of log probit analysis (at 95% confidence level) revealed that lethal concentration LC₅₀ and LC₉₀ values were 47.54 and 86.54 ppm for M. piperita, 40.5 and 85.53 ppm for Z. officinale, 115.6 and 193.3 ppm for C. longa and 148.5 and 325.7 ppm for O. basilicum, respectively. All of the tested oils proved to have strong larvicidal activity (doses from 5 to 350 ppm) against A. aegypti fourth instars, with the most potent oil being M. piperita extract, followed by Z. officinale, C. longa and O. basilicum. In general, early instars were more susceptible than the late instars and pupae. The results achieved suggest that, in addition to their medicinal activities, Lamiaceae and Zingiberaceae plant extracts may also serve as a natural larvicidal agent.

  10. Susceptibility of larvae of Aedes aegypti (Linnaeus (Diptera: Culicidae to entomopathogenic nematode Heterorhabditis bacteriophora (Poinar (Rhabditida: Heterorhabditidae

    Directory of Open Access Journals (Sweden)

    María L. PESCHIUTTA

    2014-01-01

    Full Text Available Aedes aegypti (Linnaeus (Diptera: Culicidae es vector de los agentes etiológicos de la fiebre amarilla y del dengue. Una alternativa al control químico de este vector es el uso de agentes biológicos. Los nematodos entomopatógenos son efectivos en el control de plagas. La infectividad y el ciclo de vida de un aislado argentino de Heterorhabditis bacteriophora Poinar (Rhabditida: Heterorhabditidae en larvas de A. aegypti se registró por primera vez bajo condiciones de laborato - rio. Para cada unidad experimental, 30 larvas de mosquito de segundo estadio fueron expuestas a 8 dosis del nematodo (0:1, 1:1, 5:1, 15:1, 100:1, 500:1, 750:1, 1500:1. Los juveniles infectivos (JIs utilizados fueron multiplicados sobre Galleria mellonella (Lepidoptera: Pyralidae. La continuidad infectiva de los JIs obtenidos de A. aegypti fue probada aplicándolos en una dosis de 100:1 sobre larvas del mosquito . Las tasas de mortalidad fueron de 0% a 84%. El número de nematodos desarrollados dentro de la larva de mosquito, la mortalidad larval y los nuevos JIs se incrementaron con el aumento de la dosis de nematodos. Los resultados indican que H. bacteriophora es capaz de infectar larvas de A. aegypti , se desarrolla y produce nuevos JIs, permitiendo la continuidad de su ciclo de vida.

  11. Culicidae (Diptera selection of humans, chickens and rabbits in three different environments in the province of Chaco, Argentina

    Directory of Open Access Journals (Sweden)

    Marina Stein

    2013-08-01

    Full Text Available Studies were conducted to determine the selection of humans, chickens and rabbits by Culicidae in three different environments in the province of Chaco, Argentina. Mosquitoes were collected fortnightly using cylindrical metal traps containing animal bait (chickens and rabbits. The mosquitoes were collected between June 2001-May 2002. During the same period and with the same frequency, mosquitoes biting the human operators of the traps were collected during the first 15 min of exposure within different time intervals: from 09:00 am-11:00 am, 01:00 pm-03:00 pm, 05:00 pm-07:00 pm and 09:00 pm-10:00 pm. A total of 19,430 mosquitoes of 49 species belonging to 10 genera were collected. Culex species mainly selected chicken bait and Wyeomyia species selected rabbit bait. Ochlerotatus and Psorophora species were more abundant in rabbit-baited traps. Anopheles triannulatus, Coquillettidia nigricans, Ochlerotatus scapularis, Mansonia titillans and Psorophora albigenu showed a strong attraction for human bait. The Anopheles, Coquillettidia, Culex and Mansonia species were more active between 05:00 pm-09:00 pm, while Ochlerotatus, Psorophora, Haemagogus and Wyeomyia were most active from 09:00 am-07:00 pm. This study provides additional information about the biology and ecology of arbovirus vectors in Chaco.

  12. Selection of insensitive acetylcholinesterase as a resistance mechanism in Aedes aegypti (Diptera: Culicidae) from Santiago de Cuba.

    Science.gov (United States)

    Bisset, Juan; Rodríguez, María M; Fernández, Ditter

    2006-11-01

    A sample of Aedes aegypti (L.) (Diptera: Culicidae) from Santiago de Cuba, Cuba, with a high level of propoxur resistance compared with the reference susceptible Rockefeller strain (12.60 x at the 50% lethal concentration [LC50] and 18.08 at the 90% lethal concentration [LC90]), with a 4.3% frequency of insensitive acetylcholinesterase (AChE) frequency, was subjected to propoxur selection for 13 successive generations to increase the frequency of this resistance mechanism in Ae. aegypti. High resistance to propoxur was developed during this selection (41.73-fold), and the frequency of insensitive AChE mechanism was increased 13.25-fold. Other mechanisms (overproduced esterases, glutathione transferases, or monooxygenases) were not detected in the propoxur-selected strain. The selection of an insensitive AChE resistance mechanism in Ae. aegypti has important implications and will be a valuable resource for genetic studies and molecular characterization of the ace gene mutation(s) associated with insecticide resistance in Ae. aegypti.

  13. Larvicidal Activity of Essential Oils from the Leaves and Fruits of Nutmeg (Myristica fragrans Houtt Against Aedes aegypti (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Anne Carolina

    2016-07-01

    Full Text Available The aim of this research was to examine the larvicidal activity of essential oil (EO extracted from nutmeg (Myristica fragrans Houtt leaves and fruits by steam distillation, and to analyze its chemical compounds. The EO yield of nutmeg leaves and fruits collected from the same tree was 0.66% and 0.30%, respectively. Larvicidal tests with the EO were carried out against Aedes aegypti (L. (Diptera: Culicidae. The concentrations of nutmeg EO used for the larvicidal assay were 50, 100, 150, 200, and 250 μg/mL. The results showed that fruit oil was more toxic than the leaf oil. LC50 values of leaf and fruit EOs were 133.8 and 110.1 µg/mL, respectively. The chromatogram of GC-MS showed that the chemical components in nutmeg leaf and fruit EOs were dominated by α-pinene, sabinene, β-pinene, delta-3-carene, limonene, β-phellandrene, α-terpinolene, linalool, safrole, croweacin, and myristicin.

  14. Repellent activities of some Labiatae plant essential oils against the saltmarsh mosquito Ochlerotatus caspius (Pallas, 1771) (Diptera: Culicidae).

    Science.gov (United States)

    Koc, Samed; Oz, Emre; Cetin, Huseyin

    2012-06-01

    The repellent activities of the essential oils of two Thymus (Thymus sipyleus Boiss. subsp. sipyleus and Thymus revolutus Celak) and two Mentha (Mentha spicata L. subsp. spicata and Mentha longifolia L.) species against Ochlerotatus caspius (Pallas, 1771) (Diptera: Culicidae) are presented. The essential oils were obtained by hydrodistillation of the aerial parts of the plants in flowering period and repellency tests were done with a Y-tube olfactometer. All essential oils showed repellency in varying degrees and exhibited no significant time-dependent repellent activities. When all test oils compared for repellent activities there was no significant activity detected within 15 min exposure period. Mentha essential oils had better activity than Thymus essential oils, producing high repellency (73.8-84.2%) at 30th min on Oc. caspius. Mentha longifolia has the best mosquito repellent activity among the plants tested at the 25th min. Th. sipyleus subsp. sipyleus essential oil produced >85% repellent activity at the 15th min, but the effect decreased noticeably to 63.1% and 68% at 25th and 30th min, respectively.

  15. Early history of laboratory breeding of Aedes aegypti (Diptera: Culicidae) focusing on the origins and use of selected strains.

    Science.gov (United States)

    Kuno, Goro

    2010-11-01

    The yellow fever mosquito, Aedes aegypti (L.) (Diptera: Culicidae), is well recognized for its extensive adaptation to diverse ecological conditions and for genetic variation. Recognizing the importance of strain variation of this mosquito, researchers have established a large number of laboratory strains. Some of the popular strains have been used for research for years in many laboratories around the world. However, the exact origins of many of these strains are unknown. In this review, publications and archival records were examined to report the early laboratory mosquito rearing practices around the world and to identify the origins of selected strains. The records showed that inter-laboratory sharing of strains was already underway in the early part of the 20th century because of the ease of breeding Ae. aegypti and of sending eggs by mail. It also was found that the four strains established in major U.S. institutions by the mid-1930s, including the "ROCK" (short for Rockefeller) strain, had been derived from Cuba, Nigeria, Philippines, or Puerto Rico, all known for a long history of transmission of yellow fever virus or dengue virus rather than from North America. The strains used for research in Europe were primarily derived from West Africa, but strains of Asian, Caribbean, and South American origins also were used for comparative experiments among geographic strains. Neglected issues related to strain designation and original source identification in scientific publications were found and their relevance to current research is discussed.

  16. Processes affecting Aedes aegypti (Diptera: Culicidae) infestation and abundance: inference through statistical modeling and risk maps in northern Argentina.

    Science.gov (United States)

    Garelli, F M; Espinosa, M O; Gürtler, R E

    2012-05-01

    Understanding the processes that affect Aedes aegypti (L.) (Diptera: Culicidae) may serve as a starting point to create and/or improve vector control strategies. For this purpose, we performed statistical modeling of three entomological surveys conducted in Clorinda City, northern Argentina. Previous 'basic' models of presence or absence of larvae and/or pupae (infestation) and the number of pupae in infested containers (productivity), mainly based on physical characteristics of containers, were expanded to include variables selected a priori reflecting water use practices, vector-related context factors, the history of chemical control, and climate. Model selection was performed using Akaike's Information Criterion. In total, 5,431 water-holding containers were inspected and 12,369 Ae. aegypti pupae collected from 963 positive containers. Large tanks were the most productive container type. Variables reflecting every putative process considered, except for history of chemical control, were selected in the best models obtained for infestation and productivity. The associations found were very strong, particularly in the case of infestation. Water use practices and vector-related context factors were the most important ones, as evidenced by their impact on Akaike's Information Criterion scores of the infestation model. Risk maps based on empirical data and model predictions showed a heterogeneous distribution of entomological risk. An integrated vector control strategy is recommended, aiming at community participation for healthier water use practices and targeting large tanks for key elements such as lid status, water addition frequency and water use.

  17. Comparative account of energy reserves in four co-occurring mosquito species in Kolkata, India (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Mohan Sushree

    2017-03-01

    Full Text Available Energy reserves in mosquitoes are an indicator of fitness, linking larval effort in resource acquisition with adult survival and fecundity. In other words, life history strategies and disease transmission potential can be related to the amount of energy reserves. The energy reserves of four mosquitoes – Aedes aegypti, Aedes albopictus, Armigeres subalbatus and Culex quinquefasciatus (Diptera: Culicidae – were calculated to justify species-specific differences in their life history strategies. Following repeated sampling of pupae from the respective larval habitats, the glycogen, sugar and lipid contents of individual mosquitoes were assessed and corroborated with pupal weight and adult wing length. Discriminant function analysis was used to acquire an initial reflection of the differences of the parameters among the sex and species of the mosquitoes considered in the study. Using logistic regression and ANOVA, the effects of species and sex as contributors to variations in energy reserves could be established. The results indicated that for all the mosquitoes, sex-specific differences were prominent with reference to the energy reserves. Species-specific differences in energy reserves reflect differences in resource acquisition and assimilation in the tissues, and thus the differences in the life history strategies of these four species.

  18. Evaluation of Some Plant Fruit Extracts for the Control of West Nile Virus Vector Culex pipiens (Diptera: Culicidae)

    Science.gov (United States)

    Koc, Samed; Evren, Ozay Hasan; Cetin, Huseyin

    2016-01-01

    Background: The extracts of different parts of plants were found very effective against various pests. The aim of this research was to determine the insecticidal activity of fruit methanol extracts obtained from Melia azedarach (Meliaceae), Phoenix theophrasti (Arecaceae), Styphnolobium japonicum (Fabaceae) and Pyracantha coccinea (Rosaceae) against the larvae of Culex pipiens (Diptera: Culicidae). Methods: The fruits of test plants were collected from the Campus of Akdeniz University, Antalya, Turkey in 2013. A series of concentrations of the extracts ranging from 62.5–1000 ppm were tested against second instar larvae. Results: Only the extracts of Me. azedarach and Ph. theoprasti showed significant larvicidal activity against Cx. pipiens and the LC50 values of these extracts were found to be 169.48 and 220.60 ppm, respectively. This is the first research investigating the insecticidal or larvicidal activity of Ph. theophrasti, St. japonicum and Py. coccinea extracts on mosquitoes. Conclusion: The methanol extract of fruits of Me. azedarach and Ph. theophrasti showed significantly higher larvicidal activity against Cx. pipiens. PMID:28032112

  19. Chemical Composition and Larvicidal Activity of Essential Oils Extracted from Brazilian Legal Amazon Plants against Aedes aegypti L. (Diptera: Culicidae)

    Science.gov (United States)

    Dias, Clarice Noleto; Alves, Luciana Patrícia Lima; Rodrigues, Klinger Antonio da Franca; Brito, Maria Cristiane Aranha; Rosa, Carliane dos Santos; do Amaral, Flavia Maria Mendonça; Monteiro, Odair dos Santos; Andrade, Eloisa Helena de Aguiar; Maia, José Guilherme Soares; Moraes, Denise Fernandes Coutinho

    2015-01-01

    The mosquito Aedes aegypti L. (Diptera: Culicidae) is the major vector of dengue and chikungunya fever. The lack of effective therapies and vaccines for these diseases highlights the need for alternative strategies to control the spread of virus. Therefore, this study investigated the larvicidal potential of essential oils from common plant species obtained from the Chapada das Mesas National Park, Brazil, against third instar A. aegypti larvae. The chemical composition of these oils was determined by gas chromatography coupled to mass spectrometry. The essential oils of Eugenia piauhiensis Vellaff., Myrcia erythroxylon O. Berg, Psidium myrsinites DC., and Siparuna camporum (Tul.) A. DC. were observed to be mainly composed of sesquiterpene hydrocarbons. The essential oil of Lippia gracilis Schauer was composed of oxygenated monoterpenes. Four of the five tested oils were effective against the A. aegypti larvae, with the lethal concentration (LC50) ranging from 230 to 292 mg/L after 24 h of exposure. Overall, this work demonstrated the possibility of developing larvicidal products against A. aegypti by using essential oils from the flora of the Brazilian Legal Amazon. This in turn demonstrates the potential of using natural resources for the control of disease vectors. PMID:25949264

  20. Evaluation of four sampling techniques for surveillance of Culex quinquefasciatus (Diptera: Culicidae) and other mosquitoes in African rice agroecosystems.

    Science.gov (United States)

    Muturi, Ephantus J; Mwangangi, Joseph; Shililu, Josephat; Muriu, Simon; Jacob, Benjamin; Mbogo, Charles M; John, Githure; Novak, Robert

    2007-05-01

    Field studies were conducted in a rice, Oryza sativa L., agroecosystem in Mwea Kenya to compare the efficiency of CO2-baited Centers for Disease Control (CDC) light traps against nonbaited CDC light traps and gravid traps against oviposition traps in outdoor collection of Culex quinquefasciatus Say (Diptera: Culicidae) and other mosquitoes. Collectively, 21 mosquito species from the genera Culex, Anopheles, Mansonia, Ficalbia, and Aedes were captured during the 10-wk study period. Cx. quinquefasciatus was the predominant species in all trap types with proportions ranging from 57% in the nonbaited CDC light traps to 95% in the gravid traps. Significantly higher numbers of Cx. quinquefasciatus and Culex annulioris Theobald were collected in the CO2-baited CDC light traps than in the nonbaited CDC light traps, but the numbers of other mosquito species, including malaria vectors Anopheles arabiensis Patton and Anopheles funestus Giles did not differ significantly between the two trap types. More Cx. quinquefasciatus females were collected in grass infusion-baited gravid traps than egg rafts of this species in oviposition traps containing the same infusion. Although most mosquitoes captured in CO,-baited and nonbaited CDC light traps were unfed, most of those collected in gravid traps were gravid. From these findings, it is concluded that at least in the rice-growing area of Mwea Kenya, CO2-baited CDC light traps in conjunction with gravid traps can be used in monitoring of Cx. quinquefasciatus both for control and disease surveillance.

  1. Larvicidal and repellent activity of tetradecanoic acid againstAedes aegypti (Linn.) andCulex quinquefasciatus (Say.) (Diptera:Culicidae)

    Institute of Scientific and Technical Information of China (English)

    Sivakumar R; Jebanesan A; Govindarajan M; Rajasekar P

    2011-01-01

    Objective:To investigate the larvicidal and repellent efficacy of tetradecanoic acid against Aedes aegypti (Ae. aegypti) L. andCulex quinquefasciatus (Cx. quinquefasciatus) Say (Diptera: Culicidae).Methods: Larvicidal efficacy of tetradecanoic acid was tested at various concentrations against the early third instar larvae of Ae. aegypti andCx. quinquefasciatus. The repellent activity was determined against two mosquito species at three concentrations viz.,1.0,2.5 and5.0 ppm under the laboratory conditions.Results: The tetradecanoic acid was found to be more effective againstCx. quinquefasciatus thanAe. aegypti larvae. TheLC50values were14.08 ppm and25.10 ppm, respectively. Tetradecanoic acid showed lesser repellency againstAe. aegypti andCx. quinquefasciatus. The highest repellency was observed in higher concentration of5.0 mg/cm2provided100% protection up to60 and 90 min againstAe. aegypti andCx. quinquefasciatusrespectively.Conclusions: From the results it can be concluded the tetradecanoic acid is a potential for controlling Cx. quinquefasciatus andAe. aegypti mosquitoes.

  2. Odonate Nymphs: Generalist Predators and Their Potential in the Management of Dengue Mosquito, Aedes aegypti (Diptera: Culicidae)

    Science.gov (United States)

    Akram, Waseem; Ali-Khan, Hafiz Azhar

    2016-01-01

    Background: Dengue is amongst the most serious mosquito-borne infectious disease with hot spots in tropical and subtropical parts of the world. Unfortunately, no licensed vaccine for the disease is currently available in medicine markets. The only option available is the management of dengue vector mosquito, Aedes aegypti (Diptera: Culicidae). Method: Predatory potential of five odonate nymphs namely Anax parthenope, Bradinopyga geminate, Ischnura forcipata, Rhinocypha quadrimaculata, and Orthetrum sabina were evaluated against the 4th instar larvae of the dengue vector mosquito, Aedes aegypti, under laboratory conditions. The consumption of the mosquito larvae was evaluated at three water volume levels viz., 1 liter, 2 liter and 3 liter. Results: The number of Ae. aegypti larvae consumed varied significantly among the five species, and at different levels of water volume (Podonate nymphs and the water volumes was statistically non-significant (P> 0.05). Ischnura forcipata consumed the highest number of Ae. aegypti larvae (n=56) followed by A. parthenope (n=47) and B. geminate (n=46). The number of larvae consumed was decreased with increasing search area or water volume, and the highest predation was observed at 1-liter water volume. Conclusion: The odonate nymphs could be a good source of biological agents for the management of the mosquitoes at larval stages. PMID:27308283

  3. First report of Coelomomyces santabrancae sp. nov. (Blastocladiomycetes: Blastocladiales) infecting mosquito larvae (Diptera: Culicidae) in central Brazil.

    Science.gov (United States)

    Rueda-Páramo, M E; Montalva, C; Arruda, W; Fernandes, É K K; Luz, C; Humber, R A

    2017-10-01

    A project from 2013 to 2017 sought to discover pathogenic fungi and oomycetes from dipteran species that are vectors of major diseases of humans and animals in central Brazil and to begin evaluating the potential of these pathogens as potential biological control agents concentrated on mosquito larvae. Some collecting sites proved to be especially productive for pathogens of naturally occurring mosquito species and for placements of healthy sentinel larvae of Aedes aegypti in various sorts of containers in a gallery forest in the Santa Branca Ecoturismo Private Reserve of Natural Patrimony (RPPN) near Terezópolis de Goiás (GO). Collections during May-April of 2016 and February 2017 yielded a few dead mosquito larvae of an undetermined Onirion sp. (Culicidae: Sabethini) whose hemocoels contained many ovoid, thick-walled, yellow-golden to golden-brown, ovoid thick-walled resistant sporangia, 38.3±4×22.8±2.3µm, decorated by numerous, closely and randomly spaced punctations of variable size and shape. These were the first indisputable collections from Brazil of any Coelomomyces species. Comparisons of the morphology of these sporangia with those of other species of Coelomomyces, confirmed that this Brazilian fungus represented a new species that is described here as Coelomomyces santabrancae. Copyright © 2017. Published by Elsevier Inc.

  4. Application Site and Mosquito Age Influences Malathion- and Permethrin-Induced Mortality in Culex quinquefasciatus (Diptera: Culicidae).

    Science.gov (United States)

    Aldridge, Robert L; Kaufman, Phillip E; Bloomquist, Jeffrey R; Gezan, Salvador A; Linthicum, Kenneth J

    2017-09-06

    Concentrations of malathion and permethrin typical in droplets generated from ultra-low-volume and low-volume applications used to control mosquito populations were evaluated for efficacy against multiple-aged Culex quinquefasciatus Say (Diptera: Culicidae), using a topical bioassay. Although insecticide droplets will impinge on many exoskeletal body regions and a range of ages of mosquitoes in a population, traditional mosquito topical bioassays focus pesticide application to the mesothoracic pleural or dorsal regions across an average mosquito age (e.g., 3-7 d). Our results document nonuniform insecticide sensitivity across body regions at ages not previously assessed in mosquitoes (teneral and 14-d old). We expect our findings to influence the topical bioassay process, illustrating the difference in mosquito body regions and ages that ultimately may explain insecticide effectiveness wherever droplets impinge upon the mosquito body during field control applications. Published by Oxford University Press on behalf of Entomological Society of America 2017. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  5. Odonate Nymphs: Generalist Predators and their Potential in the Management of Dengue Mosquito, Aedes aegypti (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    Waseem Akram

    2016-01-01

    Full Text Available Background: Dengue is amongst the most serious mosquito-borne infectious disease with hot spots in tropical and subtropical parts of the world. Unfortunately, no licensed vaccine for the disease is currently available in medicine markets. The only option available is the management of dengue vector mosquito, Aedes aegypti (Diptera: Culicidae.Method: Predatory potential of five odonate nymphs namely Anax parthenope, Bradinopyga geminate, Ischnura forcipata, Rhinocypha quadrimaculata, and Orthetrum sabina were evaluated against the 4th instar larvae of the den­gue vector mosquito, Aedes aegypti, under laboratory conditions. The consumption of the mosquito larvae was eval­uated at three water volume levels viz., 1 liter, 2 liter and 3 liter.Results: The number of Ae. aegypti larvae consumed varied significantly among the five species, and at different levels of water volume (P< 0.01. However, the interaction between odonate nymphs and the water volumes was statistically non-significant (P> 0.05. Ischnura forcipata consumed the highest number of Ae. aegypti larvae (n=56 followed by A. parthenope (n=47 and B. geminate (n=46. The number of larvae consumed was decreased with in­creasing search area or water volume, and the highest predation was observed at 1-liter water volume.Conclusion: The odonate nymphs could be a good source of biological agents for the management of the mosquitoes at larval stages. 

  6. Evaluation of temephos and chlorpyrifos-methyl against Culex pipiens (Diptera: Culicidae) larvae in septic tanks in Antalya, Turkey.

    Science.gov (United States)

    Cetin, H; Yanikoglu, A; Kocak, O; Cilek, J E

    2006-11-01

    The larvicidal activity of chlorpyrifos-methyl and temephos was evaluated against Culex pipiens L. (Diptera: Culicidae) in septic tanks in Antalya, Turkey. Chlorpyrifos-methyl (Pyrifos MT 25 emulsifiable concentrate [EC] ) was evaluated at application rates of 0.04, 0.08, and 0.12 mg active ingredient (AI)/liter, and temephos (Temeguard 50 EC) was evaluated at 0.02, 0.04, and 0.06 mg (AI)/liter during a 21-d study. Generally, overall larval reduction in septic tanks from single- and multifamily dwellings treated with either larvicide was significantly greater than pretreatment levels and control tanks for the duration of the study. At 14 d posttreatment, duration of control was greatest in multifamily tanks treated with chlorpyrifos-methyl at the highest application rate with similar levels of control through 21 d for single-family dwellings (range 97-100%). Septic tanks from both types of family dwellings treated at the highest application rate of temephos resulted in >90% reduction through day 21 (range 91-100%). Laboratory bioassays of septic tank water treated at field application rates, without daily dilution, revealed that complete larval mortality was achieved for 21 d at each application rate and formulation. It is thought that daily addition of water and organic matter to the septic tanks in the single and multifamily dwellings influenced the duration of effectiveness of the larvicides.

  7. Genetic Determinism vs. Phenotypic Plasticity in Protist Morphology.

    Science.gov (United States)

    Mulot, Matthieu; Marcisz, Katarzyna; Grandgirard, Lara; Lara, Enrique; Kosakyan, Anush; Robroek, Bjorn J M; Lamentowicz, Mariusz; Payne, Richard J; Mitchell, Edward A D

    2017-02-23

    Untangling the relationships between morphology and phylogeny is key to building a reliable taxonomy, but is especially challenging for protists, where the existence of cryptic or pseudocryptic species makes finding relevant discriminant traits difficult. Here we use Hyalosphenia papilio (a testate amoeba) as a model species to investigate the contribution of phylogeny and phenotypic plasticity in its morphology. We study the response of H. papilio morphology (shape and pores number) to environmental variables in (i) a manipulative experiment with controlled conditions (water level), (ii) an observational study of a within-site natural ecological gradient (water level), and (iii) an observational study across 37 European peatlands (climate). We showed that H. papilio morphology is correlated to environmental conditions (climate and water depth) as well as geography, while no relationship between morphology and phylogeny was brought to light. The relative contribution of genetic inheritance and phenotypic plasticity in shaping morphology varies depending on the taxonomic group and the trait under consideration. Thus, our data call for a reassessment of taxonomy based on morphology alone. This clearly calls for a substantial increase in taxonomic research on these globally still under-studied organisms leading to a reassessment of estimates of global microbial eukaryotic diversity.

  8. Temporal Patterns of Abundance of Aedes aegypti and Aedes albopictus (Diptera: Culicidae) and Mitochondrial DNA Analysis of Ae. albopictus in the Central African Republic

    Science.gov (United States)

    Kamgang, Basile; Ngoagouni, Carine; Manirakiza, Alexandre; Nakouné, Emmanuel; Paupy, Christophe; Kazanji, Mirdad

    2013-01-01

    The invasive Asian tiger mosquito Aedes albopictus (Diptera: Culicidae) was first reported in central Africa in 2000, in Cameroon, with the indigenous mosquito species Ae. aegypti (Diptera: Culicidae). Today, this invasive species is present in almost all countries of the region, including the Central African Republic (CAR), where it was first recorded in 2009. As invasive species of mosquitoes can affect the distribution of native species, resulting in new patterns of vectors and concomitant risk for disease, we undertook a comparative study early and late in the wet season in the capital and the main cities of CAR to document infestation and the ecological preferences of the two species. In addition, we determined the probable geographical origin of invasive populations of Ae. albopictus with two mitochondrial DNA genes, COI and ND5. Analysis revealed that Ae. aegypti was more abundant earlier in the wet season and Ae. albopictus in the late wet season. Used tyres were the most heavily colonized productive larval habitats for both species in both seasons. The invasive species Ae. albopictus predominated over the resident species at all sites in which the two species were sympatric. Mitochondrial DNA analysis revealed broad low genetic diversity, confirming recent introduction of Ae. albopictus in CAR. Phylogeographical analysis based on COI polymorphism indicated that the Ae. albopictus haplotype in the CAR population segregated into two lineages, suggesting multiple sources of Ae. albopictus. These data may have important implications for vector control strategies in central Africa. PMID:24349596

  9. Biodiversity and influence of climatic factors on mosquitoes (Diptera: Culicidae) around the Peixe Angical hydroelectric scheme in the state of Tocantins, Brazil.

    Science.gov (United States)

    Silva, Júlia Dos Santos; Pacheco, Juliana Barreto; Alencar, Jeronimo; Guimarães, Anthony Erico

    2010-03-01

    The influence of climatic factors on the seasonal frequency of mosquitoes (Diptera: Culicidae) at the Peixe Angical hydroelectric scheme (Tocantins, Brazil) was evaluated in the present paper. Mosquito surveys were conducted in the municipality of Peixe and in areas surrounding the reservoir in the municipalities of Paranã and São Salvador do Tocantins during two daytime periods (10 am-12 noon and 2 pm-4 pm) and two night-time periods (6 pm-8 pm and 6 pm-10 am) over 14 months. In total, 10,840 specimens from 42 species were captured, 84.5% of which belonged to the Culcinae. The most common species were Anopheles darlingi, Psorophora albipes and Sabethes chloropterus. The number of Culicidae specimens was higher in months with higher rainfall and air humidity than during the drier months. The large population of Ps. albipes and the presence of both An. darlingi (primary vector for human malaria parasites) and Haemagogus janthinomys (primary vector for yellow fever virus) are highlighted.

  10. Temporal patterns of abundance of Aedes aegypti and Aedes albopictus (Diptera: Culicidae and mitochondrial DNA analysis of Ae. albopictus in the Central African Republic.

    Directory of Open Access Journals (Sweden)

    Basile Kamgang

    Full Text Available The invasive Asian tiger mosquito Aedes albopictus (Diptera: Culicidae was first reported in central Africa in 2000, in Cameroon, with the indigenous mosquito species Ae. aegypti (Diptera: Culicidae. Today, this invasive species is present in almost all countries of the region, including the Central African Republic (CAR, where it was first recorded in 2009. As invasive species of mosquitoes can affect the distribution of native species, resulting in new patterns of vectors and concomitant risk for disease, we undertook a comparative study early and late in the wet season in the capital and the main cities of CAR to document infestation and the ecological preferences of the two species. In addition, we determined the probable geographical origin of invasive populations of Ae. albopictus with two mitochondrial DNA genes, COI and ND5. Analysis revealed that Ae. aegypti was more abundant earlier in the wet season and Ae. albopictus in the late wet season. Used tyres were the most heavily colonized productive larval habitats for both species in both seasons. The invasive species Ae. albopictus predominated over the resident species at all sites in which the two species were sympatric. Mitochondrial DNA analysis revealed broad low genetic diversity, confirming recent introduction of Ae. albopictus in CAR. Phylogeographical analysis based on COI polymorphism indicated that the Ae. albopictus haplotype in the CAR population segregated into two lineages, suggesting multiple sources of Ae. albopictus. These data may have important implications for vector control strategies in central Africa.

  11. PREFACE: Quantum Optics III

    Science.gov (United States)

    Orszag, M.; Retamal, J. C.; Saavedra, C.; Wallentowitz, S.

    2007-06-01

    All the 50 years of conscious pondering did not bring me nearer to an answer to the question `what is light quanta?'. Nowadays, every rascal believes, he knows it, however, he is mistaken. (A Einstein, 1951 in a letter to M Besso) Quantum optics has played a key role in physics in the last several decades. On the other hand, in these early decades of the information age, the flow of information is becoming more and more central to our daily life. Thus, the related fields of quantum information theory as well as Bose-Einstein condensation have acquired tremendous importance in the last couple of decades. In Quantum Optics III, a fusion of these fields appears in a natural way. Quantum Optics III was held in Pucón, Chile, in 27-30 of November, 2006. This beautiful location in the south of Chile is near the lake Villarrica and below the snow covered volcano of the same name. This fantastic environment contributed to a relaxed atmosphere, suitable for informal discussion and for the students to have a chance to meet the key figures in the field. The previous Quantum Optics conferences took place in Santiago, Chile (Quantum Optics I, 2000) and Cozumel, Mexico (Quantum Optics II, 2004). About 115 participants from 19 countries attended and participated in the meeting to discuss a wide variety of topics such as quantum-information processing, experiments related to non-linear optics and squeezing, various aspects of entanglement including its sudden death, correlated twin-photon experiments, light storage, decoherence-free subspaces, Bose-Einstein condensation, discrete Wigner functions and many more. There was a strong Latin-American participation from Argentina, Brazil, Chile, Colombia, Peru, Uruguay, Venezuela and Mexico, as well as from Europe, USA, China, and Australia. New experimental and theoretical results were presented at the conference. In Latin-America a quiet revolution has taken place in the last twenty years. Several groups working in quantum optics and

  12. Plastic Accumulation in the Mediterranean Sea

    Science.gov (United States)

    Cózar, Andrés; Sanz-Martín, Marina; Martí, Elisa; González-Gordillo, J. Ignacio; Ubeda, Bárbara; Gálvez, José Á.; Irigoien, Xabier; Duarte, Carlos M.

    2015-01-01

    Concentrations of floating plastic were measured throughout the Mediterranean Sea to assess whether this basin can be regarded as a great accumulation region of plastic debris. We found that the average density of plastic (1 item per 4 m2), as well as its frequency of occurrence (100% of the sites sampled), are comparable to the accumulation zones described for the five subtropical ocean gyres. Plastic debris in the Mediterranean surface waters was dominated by millimeter-sized fragments, but showed a higher proportion of large plastic objects than that present in oceanic gyres, reflecting the closer connection with pollution sources. The accumulation of floating plastic in the Mediterranean Sea (between 1,000 and 3,000 tons) is likely related to the high human pressure together with the hydrodynamics of this semi-enclosed basin, with outflow mainly occurring through a deep water layer. Given the biological richness and concentration of economic activities in the Mediterranean Sea, the affects of plastic pollution on marine and human life are expected to be particularly frequent in this plastic accumulation region. PMID:25831129

  13. Cyclic Plastic Deformation and Welding Simulation

    NARCIS (Netherlands)

    Ten Horn, C.H.L.J.

    2003-01-01

    One of the concerns of a fitness for purpose analysis is the quantification of the relevant material properties. It is known from experiments that the mechanical properties of a material can change due to a monotonic plastic deformation or a cyclic plastic deformation. For a fitness for purpose anal

  14. Nano-plastics in the aquatic environment.

    Science.gov (United States)

    Mattsson, K; Hansson, L-A; Cedervall, T

    2015-10-01

    The amount of plastics released to the environment in modern days has increased substantially since the development of modern plastics in the early 1900s. As a result, concerns have been raised by the public about the impact of plastics on nature and on, specifically, aquatic wildlife. Lately, much attention has been paid to macro- and micro-sized plastics and their impact on aquatic organisms. However, micro-sized plastics degrade subsequently into nano-sizes whereas nano-sized particles may be released directly into nature. Such particles have a different impact on aquatic organisms than larger pieces of plastic due to their small size, high surface curvature, and large surface area. This review describes the possible sources of nano-sized plastic, its distribution and behavior in nature, the impact of nano-sized plastic on the well-being of aquatic organisms, and the difference of impact between nano- and micro-sized particles. We also identify research areas which urgently need more attention and suggest experimental methods to obtain useful data.

  15. Reliability of Elasto-Plastic Structural Systems

    DEFF Research Database (Denmark)

    Delmar, M. V.; Sørensen, John Dalsgaard

    1990-01-01

    This paper proposes a method for generating safety margins and failure mode equations for elasto-plastic structures where interaction of load effects is taken into account. Structural failure is defined by large nodal displacements or plastic collapse. A branch-and-bound technique is used...

  16. Marine Debris and Plastic Source Reduction Toolkit

    Science.gov (United States)

    Many plastic food service ware items originate on college and university campuses—in cafeterias, snack rooms, cafés, and eateries with take-out dining options. This Campus Toolkit is a detailed “how to” guide for reducing plastic waste on college campuses.

  17. Demonstrating Fluorescence with Neon Paper and Plastic

    Science.gov (United States)

    Birriel, Jennifer J.; Roe, Clarissa

    2015-01-01

    Several papers in this journal have dealt with the fluorescence in orange neon plastic, olive oil, and soda. In each case, the fluorescent emission was excited by either green or violet-blue laser light. In this paper, we examine the fluorescent emission spectra of so-called neon colored papers and plastic clipboards available in department and…

  18. Developments in Plasticity Approach to Shear

    DEFF Research Database (Denmark)

    Hoang, Cao Linh; Nielsen, Mogens Peter

    1999-01-01

    The paper deals with plastic methods applied to shear design of reinforced concrete beams. Emphasis is put on the recently developed crack sliding model applicable to non-shear reinforced and lightly shear reinforced beams and slabs. The model, which is an upper bound plasticity approach, takes...

  19. Plasticity under rough surface contact and friction

    NARCIS (Netherlands)

    Sun, F.

    2016-01-01

    The ultimate objective of this work is to gain a better understanding of the plastic behavior of rough metal surfaces under contact loading. Attention in this thesis focuses on the study of single and multiple asperities with micrometer scale dimensions, a scale at which plasticity is known to be si

  20. Biological degradation of plastics: a comprehensive review.

    Science.gov (United States)

    Shah, Aamer Ali; Hasan, Fariha; Hameed, Abdul; Ahmed, Safia

    2008-01-01

    Lack of degradability and the closing of landfill sites as well as growing water and land pollution problems have led to concern about plastics. With the excessive use of plastics and increasing pressure being placed on capacities available for plastic waste disposal, the need for biodegradable plastics and biodegradation of plastic wastes has assumed increasing importance in the last few years. Awareness of the waste problem and its impact on the environment has awakened new interest in the area of degradable polymers. The interest in environmental issues is growing and there are increasing demands to develop material which do not burden the environment significantly. Biodegradation is necessary for water-soluble or water-immiscible polymers because they eventually enter streams which can neither be recycled nor incinerated. It is important to consider the microbial degradation of natural and synthetic polymers in order to understand what is necessary for biodegradation and the mechanisms involved. This requires understanding of the interactions between materials and microorganisms and the biochemical changes involved. Widespread studies on the biodegradation of plastics have been carried out in order to overcome the environmental problems associated with synthetic plastic waste. This paper reviews the current research on the biodegradation of biodegradable and also the conventional synthetic plastics and also use of various techniques for the analysis of degradation in vitro.

  1. Plastic accumulation in the Mediterranean sea.

    Directory of Open Access Journals (Sweden)

    Andrés Cózar

    Full Text Available Concentrations of floating plastic were measured throughout the Mediterranean Sea to assess whether this basin can be regarded as a great accumulation region of plastic debris. We found that the average density of plastic (1 item per 4 m2, as well as its frequency of occurrence (100% of the sites sampled, are comparable to the accumulation zones described for the five subtropical ocean gyres. Plastic debris in the Mediterranean surface waters was dominated by millimeter-sized fragments, but showed a higher proportion of large plastic objects than that present in oceanic gyres, reflecting the closer connection with pollution sources. The accumulation of floating plastic in the Mediterranean Sea (between 1,000 and 3,000 tons is likely related to the high human pressure together with the hydrodynamics of this semi-enclosed basin, with outflow mainly occurring through a deep water layer. Given the biological richness and concentration of economic activities in the Mediterranean Sea, the affects of plastic pollution on marine and human life are expected to be particularly frequent in this plastic accumulation region.

  2. Plastic accumulation in the Mediterranean sea.

    Science.gov (United States)

    Cózar, Andrés; Sanz-Martín, Marina; Martí, Elisa; González-Gordillo, J Ignacio; Ubeda, Bárbara; Gálvez, José Á; Irigoien, Xabier; Duarte, Carlos M

    2015-01-01

    Concentrations of floating plastic were measured throughout the Mediterranean Sea to assess whether this basin can be regarded as a great accumulation region of plastic debris. We found that the average density of plastic (1 item per 4 m2), as well as its frequency of occurrence (100% of the sites sampled), are comparable to the accumulation zones described for the five subtropical ocean gyres. Plastic debris in the Mediterranean surface waters was dominated by millimeter-sized fragments, but showed a higher proportion of large plastic objects than that present in oceanic gyres, reflecting the closer connection with pollution sources. The accumulation of floating plastic in the Mediterranean Sea (between 1,000 and 3,000 tons) is likely related to the high human pressure together with the hydrodynamics of this semi-enclosed basin, with outflow mainly occurring through a deep water layer. Given the biological richness and concentration of economic activities in the Mediterranean Sea, the affects of plastic pollution on marine and human life are expected to be particularly frequent in this plastic accumulation region.

  3. Constraints on the evolution of phenotypic plasticity

    DEFF Research Database (Denmark)

    Murren, Courtney J; Auld, Josh R.; Callahan, Hilary S

    2015-01-01

    Phenotypic plasticity is ubiquitous and generally regarded as a key mechanism for enabling organisms to survive in the face of environmental change. Because no organism is infinitely or ideally plastic, theory suggests that there must be limits (for example, the lack of ability to produce an opti...

  4. COMPOSITES FROM RECYCLED WOOD AND PLASTICS

    Science.gov (United States)

    The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. Two processing technologies were used to prepare wood-plastic composites: air-laying and melt...

  5. Plastic zonder olie : lesmodule voor nieuwe scheikunde

    NARCIS (Netherlands)

    Langejan, B.; Klein Douwel, C.; Horst, ter J.J.; Tijdink, K.; Marle, van N.; Klaasen, P.; Coolen, R.; Assenbergh, van P.; Sijbers, J.P.J.; Mast, A.

    2013-01-01

    Lesmodule voor nieuwe scheikunde voor leerlingen uit 5 en 6 vwo. Bioplastics worden gemaakt uit natuurlijke grondstoffen. Als ze de synthetische plastics vervangen kan de voorraad aardolie ontzien worden. Omdat veel bioplastics afbreekbaar zijn, kan ook de berg plastic afval krimpen. Maar zijn biopl

  6. Incipient plasticity in metallic thin films

    NARCIS (Netherlands)

    Soer, W. A.; De Hosson, J. Th. M.; Minor, A. M.; Shan, Z.; Asif, S. A. Syed; Warren, O. L.

    2007-01-01

    The authors have compared the incipient plastic behaviors of Al and Al-Mg thin films during indentation under load control and displacement control. In Al-Mg, solute pinning limits the ability of dislocations to propagate into the crystal and thus substantially affects the appearance of plastic inst

  7. Integrating Hebbian and homeostatic plasticity: introduction.

    Science.gov (United States)

    Fox, Kevin; Stryker, Michael

    2017-03-05

    Hebbian plasticity is widely considered to be the mechanism by which information can be coded and retained in neurons in the brain. Homeostatic plasticity moves the neuron back towards its original state following a perturbation, including perturbations produced by Hebbian plasticity. How then does homeostatic plasticity avoid erasing the Hebbian coded information? To understand how plasticity works in the brain, and therefore to understand learning, memory, sensory adaptation, development and recovery from injury, requires development of a theory of plasticity that integrates both forms of plasticity into a whole. In April 2016, a group of computational and experimental neuroscientists met in London at a discussion meeting hosted by the Royal Society to identify the critical questions in the field and to frame the research agenda for the next steps. Here, we provide a brief introduction to the papers arising from the meeting and highlight some of the themes to have emerged from the discussions.This article is part of the themed issue 'Integrating Hebbian and homeostatic plasticity'. © 2017 The Author(s).

  8. 7 CFR 58.348 - Plastic cream.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Plastic cream. 58.348 Section 58.348 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Products Bearing Usda Official Identification § 58.348 Plastic cream. The flavor shall be sweet,...

  9. Medical leech therapy in plastic reconstructive surgery.

    Science.gov (United States)

    Houschyar, Khosrow S; Momeni, Arash; Maan, Zeshaan N; Pyles, Malcolm N; Jew, Olivia S; Strathe, Marion; Michalsen, Andreas

    2015-10-01

    The use of Hirudo medicinalis in clinical practice has increased in recent years. The primary indication in plastic surgery has traditionally been venous congestion. However, other reported clinical applications were in varicose veins, thrombophlebitis, and osteoarthritis. In this review, we summarize recent data elucidating the role that medicinal leeches play in the field of plastic surgery.

  10. Plastic Accumulation in the Mediterranean Sea

    KAUST Repository

    Cózar, Andrés

    2015-04-01

    Concentrations of floating plastic were measured throughout the Mediterranean Sea to assess whether this basin can be regarded as a great accumulation region of plastic debris. We found that the average density of plastic (1 item per 4 m2), as well as its frequency of occurrence (100% of the sites sampled), are comparable to the accumulation zones described for the five subtropical ocean gyres. Plastic debris in the Mediterranean surface waters was dominated by millimeter-sized fragments, but showed a higher proportion of large plastic objects than that present in oceanic gyres, reflecting the closer connection with pollution sources. The accumulation of floating plastic in the Mediterranean Sea (between 1,000 and 3,000 tons) is likely related to the high human pressure together with the hydrodynamics of this semi-enclosed basin, with outflow mainly occurring through a deep water layer. Given the biological richness and concentration of economic activities in the Mediterranean Sea, the affects of plastic pollution on marine and human life are expected to be particularly frequent in this plastic accumulation region.

  11. Gas Property Demonstrations Using Plastic Water Bottles

    Science.gov (United States)

    Campbell, Dean J.; Bannon, Stephen J.; Gunter, Molly M.

    2011-01-01

    Plastic water bottles are convenient containers for demonstrations of gas properties illustrating Boyle's law, Charles's law, and Avogadro's law. The contents of iron-based disposable hand warmer packets can be used to remove oxygen gas from the air within an unfilled plastic water bottle.

  12. Plastic soep komt op ons bord

    NARCIS (Netherlands)

    Franeker, van J.A.

    2011-01-01

    De wereldwijd verspreide 'soep' van kleine plastic deeltjes in zeeën en oceanen vormt een omvangrijk mondiaal milieuprobleem. Niet alleen leidt het plastic tot verstrikking en verstopping bij vogels en vissen, ook brengt de giftigheid van de materie de voedselketen in gevaar. Om te voorkomen dat die

  13. Candidate genes in ocular dominance plasticity

    NARCIS (Netherlands)

    M.L. Rietman; J.-P. Sommeijer; C.N. Levelt; J.A. Heimel; A.B. Brussaard; J.G.G. Borst; Y. Elgersma; N. Galjart; G.T. van der Horst; C.M. Pennartz; A.B. Smit; B.M. Spruijt; M. Verhage; C.I. de Zeeuw

    2012-01-01

    Many studies have been devoted to the identification of genes involved in experience-dependent plasticity in the visual cortex. To discover new candidate genes, we have reexamined data from one such study on ocular dominance (OD) plasticity in recombinant inbred BXD mouse strains. We have correlated

  14. The Genetics of Phenotypic Plasticity. XIV. Coevolution.

    Science.gov (United States)

    Scheiner, Samuel M; Gomulkiewicz, Richard; Holt, Robert D

    2015-05-01

    Plastic changes in organisms' phenotypes can result from either abiotic or biotic effectors. Biotic effectors create the potential for a coevolutionary dynamic. Through the use of individual-based simulations, we examined the coevolutionary dynamic of two species that are phenotypically plastic. We explored two modes of biotic and abiotic interactions: ecological interactions that determine the form of natural selection and developmental interactions that determine phenotypes. Overall, coevolution had a larger effect on the evolution of phenotypic plasticity than plasticity had on the outcome of coevolution. Effects on the evolution of plasticity were greater when the fitness-maximizing coevolutionary outcomes were antagonistic between the species pair (predator-prey interactions) than when those outcomes were augmenting (competitive or mutualistic). Overall, evolution in the context of biotic interactions reduced selection for plasticity even when trait development was responding to just the abiotic environment. Thus, the evolution of phenotypic plasticity must always be interpreted in the full context of a species' ecology. Our results show how the merging of two theory domains--coevolution and phenotypic plasticity--can deepen our understanding of both and point to new empirical research.

  15. Regulatory mechanisms link phenotypic plasticity to evolvability

    NARCIS (Netherlands)

    van Gestel, Jordi; Weissing, Franz J

    2016-01-01

    Organisms have a remarkable capacity to respond to environmental change. They can either respond directly, by means of phenotypic plasticity, or they can slowly adapt through evolution. Yet, how phenotypic plasticity links to evolutionary adaptability is largely unknown. Current studies of plasticit

  16. Plastic soep komt op ons bord

    NARCIS (Netherlands)

    Franeker, van J.A.

    2011-01-01

    De wereldwijd verspreide 'soep' van kleine plastic deeltjes in zeeën en oceanen vormt een omvangrijk mondiaal milieuprobleem. Niet alleen leidt het plastic tot verstrikking en verstopping bij vogels en vissen, ook brengt de giftigheid van de materie de voedselketen in gevaar. Om te voorkomen dat die

  17. Demonstrating Fluorescence with Neon Paper and Plastic

    Science.gov (United States)

    Birriel, Jennifer J.; Roe, Clarissa

    2015-01-01

    Several papers in this journal have dealt with the fluorescence in orange neon plastic, olive oil, and soda. In each case, the fluorescent emission was excited by either green or violet-blue laser light. In this paper, we examine the fluorescent emission spectra of so-called neon colored papers and plastic clipboards available in department and…

  18. Bibliometric trend analyses of plastic surgery research

    NARCIS (Netherlands)

    Loonen, M.P.J.

    2007-01-01

    The present thesis was designed to evaluate the qualitative and quantitative aspects of plastic surgery research by means of a bibliometric citation analysis of plastic surgical presentations and publications. Citations to such published work provides an indication of the impact and the relevance of

  19. Bibliometric trend analyses of plastic surgery research

    NARCIS (Netherlands)

    Loonen, M.P.J.

    2007-01-01

    The present thesis was designed to evaluate the qualitative and quantitative aspects of plastic surgery research by means of a bibliometric citation analysis of plastic surgical presentations and publications. Citations to such published work provides an indication of the impact and the relevance of

  20. LPG based all plastic pressure sensor

    DEFF Research Database (Denmark)

    Bundalo, Ivan-Lazar; Lwin, R.; Leon-Saval, S.

    2015-01-01

    A prototype all-plastic pressure sensor is presented and characterized for potential use as an endoscope. The sensor is based on Long Period Gratings (LPG) inscribed with a CO2 laser in 6-ring microstructured PMMA fiber. Through a latex coated, plastic 3D-printed transducer pod, external pressure...

  1. Circuit design on plastic foils

    CERN Document Server

    Raiteri, Daniele; Roermund, Arthur H M

    2015-01-01

    This book illustrates a variety of circuit designs on plastic foils and provides all the information needed to undertake successful designs in large-area electronics.  The authors demonstrate architectural, circuit, layout, and device solutions and explain the reasons and the creative process behind each. Readers will learn how to keep under control large-area technologies and achieve robust, reliable circuit designs that can face the challenges imposed by low-cost low-temperature high-throughput manufacturing.   • Discusses implications of problems associated with large-area electronics and compares them to standard silicon; • Provides the basis for understanding physics and modeling of disordered material; • Includes guidelines to quickly setup the basic CAD tools enabling efficient and reliable designs; • Illustrates practical solutions to cope with hard/soft faults, variability, mismatch, aging and bias stress at architecture, circuit, layout, and device levels.

  2. The Plastic Tension Field Method

    DEFF Research Database (Denmark)

    Hansen, Thomas

    2005-01-01

    . The emphasis is attached to the presentation of a design method based on the diagonal tension field theory. Also, how to determine the load-carrying capacity of a given steel plate girder with transverse web stiffeners, is briefly presented. The load-carrying capacity may be predicted by applying both...... method. The method is based on the theory of plasticity and is analogous to the so-called diagonal compression field method developed for reinforced concrete beams with transverse stirrups, which is adopted in the common European concrete code (Eurocode 2). Many other theories have been developed......, but the method presented differs from these theories by incorporating the strength of the transverse stiffeners and by the assumption that the tensile bands may pass the transverse stiffeners, which often is observed in tests. Other methods have only dealt with a single web field between two stiffeners...

  3. [Cortical plasticity in blind individual].

    Science.gov (United States)

    Wang, Shu-zhen; Zhu, Si-quan

    2008-10-01

    The cognitive mechanisms and functional brain imaging research on blind individuals provide special information for exploring the plasticity of the developing human brain. This paper focuses on five aspects of recent progress in this field: (1) the behavior compensation of the blind; (2) the influence of early visual deprivation and later visual deprivation on cross-modal reorganization; (3) the relationship between the complexity of task requirement and cross-modal reorganization; (4) the relationship between the sensitive periods of the visual system and the time course of cross-modal reorganization; (5) the neural mechanisms of cross-modal reorganization. These findings contribute greatly to the theoretical basis of the rehabilitation of individuals with perceptual deficits.

  4. Time between plastic displacements of elasto-plastic oscillators subject to Gaussian white noise

    DEFF Research Database (Denmark)

    Tarp-Johansen, Niels Jacob; Ditlevsen, Ove Dalager

    2001-01-01

    A one degree of freedom elasto-plastic oscillator subject to stationary Gaussian white noise has a plastic displacement response process of intermittent character. During shorter or longer time intervals the oscillator vibrates within the elastic domain without undergoing any plastic displacements....... These pieces of elastic response cannot be distinguished from conditional Gaussian response samples given that they are within the elasticity limits. Therefore, suitable Gaussian process theory can be applied to these pieces. Typically the plastic displacements occur in clumps of random plastic displacements...

  5. Medical Entomology Studies - III. A Revision of the Subgenus Culex in the Oriental Region (Diptera: Culicidae) (Contributions of the American Entomological Institute. Volume 12, Number 2)

    Science.gov (United States)

    1976-01-01

    Subgroup with quinquefasciatus which is widespread throughout tropical parts of the world, (2) TrifiZatus Subgroup with vegans and hutchinsoni, both...region; torrentium Martini 1925 from the western Palearctic; vegans Wiedemann 1828 from the eastern Pale- arctic; pervigiluns Bergroth 1889, pacificus...discovered when the fauna is thoroughly examined. 2. C ULEX (C ULEX) VAGANS WIEDEMANN (Figs. 4, 5, 14) Culex vegans Wiedemann 1828: 545 (d, 0

  6. Evolutionary plasticity of insect immunity.

    Science.gov (United States)

    Vilcinskas, Andreas

    2013-02-01

    Many insect genomes have been sequenced and the innate immune responses of several species have been studied by transcriptomics, inviting the comparative analysis of immunity-related genes. Such studies have demonstrated significant evolutionary plasticity, with the emergence of novel proteins and protein domains correlated with insects adapting to both abiotic and biotic environmental stresses. This review article focuses on effector molecules such as antimicrobial peptides (AMPs) and proteinase inhibitors, which display greater evolutionary dynamism than conserved components such as immunity-related signaling molecules. There is increasing evidence to support an extended role for insect AMPs beyond defense against pathogens, including the management of beneficial endosymbionts. The total number of AMPs varies among insects with completed genome sequences, providing intriguing examples of immunity gene expansion and loss. This plasticity is discussed in the context of recent developments in evolutionary ecology suggesting that the maintenance and deployment of immune responses reallocates resources from other fitness-related traits thus requiring fitness trade-offs. Based on our recent studies using both model and non-model insects, I propose that insect immunity genes can be lost when alternative defense strategies with a lower fitness penalty have evolved, such as the so-called social immunity in bees, the chemical sanitation of the microenvironment by some beetles, and the release of antimicrobial secondary metabolites in the hemolymph. Conversely, recent studies provide evidence for the expansion and functional diversification of insect AMPs and proteinase inhibitors to reflect coevolution with a changing pathosphere and/or adaptations to habitats or food associated with microbial contamination. Copyright © 2012 Elsevier Ltd. All rights reserved.

  7. AUGMENTATION-RELATED BRAIN PLASTICITY

    Directory of Open Access Journals (Sweden)

    Giovanni eDi Pino

    2014-06-01

    Full Text Available Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyzes the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain.Hitherto, few studies investigated the neural correlates of augmentation, but clues on it can be borrowed from logically-related paradigms: sensorimotor training, cognitive enhancement, cross-modal plasticity, sensorimotor functional substitution, use and embodiment of tools.Augmentation modifies function and structure of a number of areas, i.e. primary sensory cortices shape their receptive fields to become sensitive to novel inputs. Motor areas adapt the neuroprosthesis representation firing-rate to refine kinematics. As for normal motor outputs, the learning process recruits motor and premotor cortices and the acquisition of proficiency decreases attentional recruitment, focuses the activity on sensorimotor areas and increases the basal ganglia drive on the cortex. Augmentation deeply relies on the frontoparietal network. In particular, premotor cortex is involved in learning the control of an external effector and owns the tool motor representation, while the intraparietal sulcus extracts its visual features. In these areas, multisensory integration neurons enlarge their receptive fields to embody supernumerary limbs. For operating an anthropomorphic neuroprosthesis, the mirror system is required to understand the meaning of the action, the cerebellum for the formation of its internal model and the insula for its interoception. In conclusion, anthropomorphic sensorized devices can provide the critical sensory afferences to evolve the exploitation of tools through their embodiment, reshaping the body representation and the

  8. [Survey of plasticizers in polyvinyl chloride toys].

    Science.gov (United States)

    Abe, Yutaka; Yamaguchi, Miku; Mutsuga, Motoh; Hirahara, Yoshichika; Kawamura, Yoko

    2012-01-01

    Plasticizers in 101 samples of polyvinyl chloride (PVC) toys on the Japanese market were surveyed. No phthalates were detected in designated toys, though bis(2-ethylhexyl)phthalate, diisononyl phthalate, diisobutyl phthalate, dibutyl phthalate, diisodecyl phthalate and benzyl butyl phthalate were detected in more than half of other toys. 2,2,4-Tributyl-1,3-pentanediol diisobutylate, o-acetyl tributyl citrate, adipates and diacetyl lauroyl glycerol, which are alternative plasticizers to phthalates, were detected. The results of structural analysis confirmed the presence of di(2-ethylhexyl)terephthalate, tributyl citrate, diisononyl 1,2-cyclohexanedicarboxylate and neopentyl glycol esters; these have not previonsly been reported in Japan. There appears to be a shift in plasticizers used for designated toys from phthalates to new plasticizers, and the number of different plasticizers is increasing.

  9. Phyllosphere yeasts rapidly break down biodegradable plastics.

    Science.gov (United States)

    Kitamoto, Hiroko K; Shinozaki, Yukiko; Cao, Xiao-Hong; Morita, Tomotake; Konishi, Masaaki; Tago, Kanako; Kajiwara, Hideyuki; Koitabashi, Motoo; Yoshida, Shigenobu; Watanabe, Takashi; Sameshima-Yamashita, Yuka; Nakajima-Kambe, Toshiaki; Tsushima, Seiya

    2011-11-29

    The use of biodegradable plastics can reduce the accumulation of environmentally persistent plastic wastes. The rate of degradation of biodegradable plastics depends on environmental conditions and is highly variable. Techniques for achieving more consistent degradation are needed. However, only a few microorganisms involved in the degradation process have been isolated so far from the environment. Here, we show that Pseudozyma spp. yeasts, which are common in the phyllosphere and are easily isolated from plant surfaces, displayed strong degradation activity on films made from poly-butylene succinate or poly-butylene succinate-co-adipate. Strains of P. antarctica isolated from leaves and husks of paddy rice displayed strong degradation activity on these films at 30°C. The type strain, P. antarctica JCM 10317, and Pseudozyma spp. strains from phyllosphere secreted a biodegradable plastic-degrading enzyme with a molecular mass of about 22 kDa. Reliable source of biodegradable plastic-degrading microorganisms are now in our hands.

  10. Nanoparticles from Degradation of Biodegradable Plastic Mulch

    Science.gov (United States)

    Flury, Markus; Sintim, Henry; Bary, Andy; English, Marie; Schaefer, Sean

    2017-04-01

    Plastic mulch films are commonly used in crop production. They provide multiple benefits, including control of weeds and insects, increase of soil and air temperature, reduction of evaporation, and prevention of soil erosion. The use of plastic mulch film in agriculture has great potential to increase food production and security. Plastic mulch films must be retrieved and disposed after usage. Biodegradable plastic mulch films, who can be tilled into the soil after usage offer great benefits as alternative to conventional polyethylene plastic. However, it has to be shown that the degradation of these mulches is complete and no micro- and nanoparticles are released during degradation. We conducted a field experiment with biodegradable mulches and tested mulch degradation. Mulch was removed from the field after the growing season and composted to facilitate degradation. We found that micro- and nanoparticles were released during degradation of the mulch films in compost. This raises concerns about degradation in soils as well.

  11. Plasticity of pressure-sensitive materials

    CERN Document Server

    Ochsner, Andreas

    2014-01-01

    Classical plasticity theory of metals is independent of the hydrostatic pressure. However, if the metal contains voids or pores or if the structure is composed of cells, this classical assumption is no more valid and the influence of the hydrostatic pressure must be incorporated in the constitutive description. Looking at the microlevel, metal plasticity is connected with the uniform planes of atoms organized with long-range order. Planes may slip past each other along their close-packed directions. The result is a permanent change of shape within the crystal and plastic deformation. The presence of dislocations increases the likelihood of planes slipping. Nowadays, the theory of pressure sensitive plasticity is successfully applied to many other important classes of materials (polymers, concrete, bones etc.) even if the phenomena on the micro-level are different to classical plasticity of metals. The theoretical background of this phenomenological approach based on observations on the macro-level is describe...

  12. Migration of plasticizer between bonded propellant interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Gottlieb, Levi; Bar, Sigalit [RAFAEL, Department M1, POB 2250, Haifa 31021 (Israel)

    2003-02-01

    Plasticizer migration across bonded propellant interfaces during cure has been shown to have a measurable effect on propellant properties compared to each propellant by itself. This shows that the curing period is significant to the migration phenomenon. The plasticizer migration has been shown to have a direct influence on tensile strength for short aging periods up to the point the plasticizer reaches equilibrium. The tensile data for short aging periods have been shown to follow an empirical equation connecting the physical characteristics of plasticizer migration with increasing propellant tensile strength. The diffusion coefficient has been evaluated on the basis of this relation from a plot of {sigma}{sup m}{sub t} versus t{sup 1/2} and was in good agreement with the diffusion coefficient from the plasticizer content data. (Abstract Copyright [2003], Wiley Periodicals, Inc.)

  13. Plastics and environmental health: the road ahead.

    Science.gov (United States)

    North, Emily J; Halden, Rolf U

    2013-01-01

    Plastics continue to benefit society in innumerable ways, even though recent public focus on plastics has centered mostly on human health and environmental concerns, including their endocrine-disrupting properties and the long-term pollution they represent. The benefits of plastics are particularly apparent in medicine and public health. Plastics are versatile, cost-effective, require less energy to produce than alternative materials like metal or glass, and can be manufactured to have many different properties. Due to these characteristics, polymers are used in diverse health applications like disposable syringes and intravenous bags, sterile packaging for medical instruments as well as in joint replacements, tissue engineering, etc. However, not all current uses of plastics are prudent and sustainable, as illustrated by the widespread, unwanted human exposure to endocrine-disrupting bisphenol A (BPA) and di-(2-ethylhexyl)phthalate (DEHP), problems arising from the large quantities of plastic being disposed of, and depletion of non-renewable petroleum resources as a result of the ever-increasing mass production of plastic consumer articles. Using the health-care sector as example, this review concentrates on the benefits and downsides of plastics and identifies opportunities to change the composition and disposal practices of these invaluable polymers for a more sustainable future consumption. It highlights ongoing efforts to phase out DEHP and BPA in the health-care and food industry and discusses biodegradable options for plastic packaging, opportunities for reducing plastic medical waste, and recycling in medical facilities in the quest to reap a maximum of benefits from polymers without compromising human health or the environment in the process.

  14. Plastics and Environmental Health: The Road Ahead

    Science.gov (United States)

    North, Emily J.; Halden, Rolf U.

    2013-01-01

    Plastics continue to benefit society in innumerable ways, even though recent public focus on plastics has centered mostly on human health and environmental concerns, including endocrine-disrupting properties and long-term pollution. The benefits of plastics are particularly apparent in medicine and public health. Plastics are versatile, cost-effective, require less energy to produce than alternative materials – such as metal or glass – and can be manufactured to have many different properties. Due to these characteristics, polymers are used in diverse health applications, such as disposable syringes and intravenous bags, sterile packaging for medical instruments as well as in joint replacements, tissue engineering, etc. However, not all current uses of plastics are prudent and sustainable, as illustrated by widespread, unwanted human exposure to endocrine-disrupting bisphenol-A (BPA) and di-(2-ethylhexyl)phthalate (DEHP), problems arising from the large quantities of plastic being disposed of, and depletion of non-renewable petroleum resources as a result of ever increasing mass-production of plastic consumer articles. By example of the healthcare sector, this review concentrates on benefits and downsides of plastics and identities opportunities to change the composition and disposal practices of these invaluable polymers for a more sustainable future consumption. It highlights ongoing efforts to phase out DEHP and BPA in the healthcare and food industry, and discusses biodegradable options for plastic packaging, opportunities for reducing plastic medical waste, and recycling in medical facilities in the quest to reap a maximum of benefits from polymers without compromising human health or the environment in the process. PMID:23337043

  15. Knowledge and perception of plastic surgery among tertiary ...

    African Journals Online (AJOL)

    2015-10-16

    Oct 16, 2015 ... in that facility. The most common ... surgeons and known facilities for facial plastic surgery. Even though ... Location of plastic surgery services. Knowledge of ... decisions, actions, and acceptance of the entity. Plastic surgery ...

  16. Prevalence and characteristics of plastic ingested by Hawaiian seabirds

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Production of plastic products and dumping of plastic garbage in the ocean have increased dramatically in the past 25 years. Plastic ingestion has not been reported...

  17. The genetics of phenotypic plasticity. XI. Joint evolution of plasticity and dispersal rate.

    Science.gov (United States)

    Scheiner, Samuel M; Barfield, Michael; Holt, Robert D

    2012-08-01

    In a spatially heterogeneous environment, the rate at which individuals move among habitats affects whether selection favors phenotypic plasticity or genetic differentiation, with high dispersal rates favoring trait plasticity. Until now, in theoretical explorations of plasticity evolution, dispersal rate has been treated as a fixed, albeit probabilistic, characteristic of a population, raising the question of what happens when the propensity to disperse and trait plasticity are allowed to evolve jointly. We examined the effects of their joint evolution on selection for plasticity using an individual-based computer simulation model. In the model, the environment consisted of a linear gradient of 50 demes with dispersal occurring either before or after selection. Individuals consisted of loci whose phenotypic expression either are affected by the environment (plastic) or are not affected (nonplastic), plus a locus determining the propensity to disperse. When dispersal rate and trait plasticity evolve jointly, the system tends to dichotomous outcomes of either high trait plasticity and high dispersal, or low trait plasticity and low dispersal. The outcome strongly depended on starting conditions, with high trait plasticity and dispersal favored when the system started at high values for either trait plasticity or dispersal rate (or both). Adding a cost of plasticity tended to drive the system to genetic differentiation, although this effect also depended on initial conditions. Genetic linkage between trait plasticity loci and dispersal loci further enhanced this strong dichotomy in evolutionary outcomes. All of these effects depended on organismal life history pattern, and in particular whether selection occurred before or after dispersal. These results can explain why adaptive trait plasticity is less common than might be expected.

  18. Effects of friction and high torque on fatigue crack propagation in Mode III

    Science.gov (United States)

    Nayeb-Hashemi, H.; McClintock, F. A.; Ritchie, R. O.

    1982-12-01

    Turbo-generator and automotive shafts are often subjected to complex histories of high torques. To provide a basis for fatigue life estimation in such components, a study of fatigue crack propagation in Mode III (anti-plane shear) for a mill-annealed AISI 4140 steel (RB88, 590 MN/m2 tensile strength) has been undertaken, using torsionally-loaded, circumferentially-notched cylindrical specimens. As demonstrated previously for higher strength AISI 4340 steel, Mode III cyclic crack growth rates (dc/dN) IIIcan be related to the alternating stress intensity factor ΔKIII for conditions of small-scale yielding. However, to describe crack propagation behavior over an extended range of crack growth rates (˜10-6 to 10-2 mm per cycle), where crack growth proceeds under elastic-plastic and full plastic conditions, no correlation between (dc/dN) III and ΔKIII is possible. Accordingly, a new parameter for torsional crack growth, termed the plastic strain intensity Γ III, is introduced and is shown to provide a unique description of Mode III crack growth behavior for a wide range of testing conditions, provided a mean load reduces friction, abrasion, and interlocking between mating fracture surfaces. The latter effect is found to be dependent upon the mode of applied loading (i.e., the presence of superimposed axial loads) and the crack length and torque level. Mechanistically, high-torque surfaces were transverse, macroscopically flat, and smeared. Lower torques showed additional axial cracks (longitudinal shear cracking) perpendicular to the main transverse surface. A micro-mechanical model for the main radi l Mode III growth, based on the premise that crack advance results from Mode II coalescence of microcracks initiated at inclusions ahead of the main crack front, is extended to high nominal stress levels, and predicts that Mode III fatigue crack propagation rates should be proportional to the range of plastic strain intensity (ΔΓIII if local Mode II growth rates are

  19. Spatial evaluation of larvae of Culicidae (Diptera from different breeding sites: application of a geospatial method and implications for vector control Avaliação espacial de formas larvais de Culicidae (Diptera em diferentes criadouros: aplicação de um método geoespacial e implicações para o controle de vetores

    Directory of Open Access Journals (Sweden)

    Rafael Piovezan

    2012-09-01

    Full Text Available Spatial evaluation of Culicidae (Diptera larvae from different breeding sites: application of a geospatial method and implications for vector control. This study investigates the spatial distribution of urban Culicidae and informs entomological monitoring of species that use artificial containers as larval habitats. Collections of mosquito larvae were conducted in the São Paulo State municipality of Santa Bárbara d' Oeste between 2004 and 2006 during house-to-house visits. A total of 1,891 samples and nine different species were sampled. Species distribution was assessed using the kriging statistical method by extrapolating municipal administrative divisions. The sampling method followed the norms of the municipal health services of the Ministry of Health and can thus be adopted by public health authorities in disease control and delimitation of risk areas. Moreover, this type of survey and analysis can be employed for entomological surveillance of urban vectors that use artificial containers as larval habitat.Avaliação espacial de formas larvais de Culicidae (Diptera em diferentes criadouros: aplicação de um método geoespacial e implicações para o controle de vetores. Este estudo investiga a distribuição espacial da fauna urbana e de Culicidae e informa o monitoramento entomológico de espécies que usam recipientes artificiais como habitat larval. Coletas de larvas de mosquitos foram realizadas no município paulista de Santa Bárbara d' Oeste entre os anos de 2004 e 2006, durante visitas casa-a-casa. Um total de 1.891 amostras foi considerado, com nove espécies diferentes coletadas. A distribuição das espécies foi avaliada através do método de krigagem estatística extrapolando as divisões administrativas do município. O método de coleta adotado no presente estudo está de acordo com os métodos sugeridos aos serviços de saúde municipais pelo Ministério da Saúde e pode, portanto, ser adotado pelas autoridades p

  20. Celestine III and the North

    DEFF Research Database (Denmark)

    Nielsen, Torben Kjersgaard

    2008-01-01

    Artiklen gennemgår pave Cølestin IIIs forhold til de nordiske kongeriger i perioden 1191-1198. Artiklen viser, at paven, som i forskningen traditionelt år har stået i skyggen af sin berømte, energiske og især: yngre efterfølger, Innocens III, har været på forkant med udviklingen i de nordiske rig...

  1. Aktau Plastics Plant Explosives Material Report

    Energy Technology Data Exchange (ETDEWEB)

    CASE JR.,ROGER S.

    1999-12-01

    The U.S. Department of Energy (DOE) has been cooperating with the Republic of Kazakhstanin Combined Threat Reduction (CTR) activities at the BN350 reactor located at the Mangyshlak Atomic Energy Complex (MAEC) in the city of Aktau, Kazakhstan since 1994. DOE contract personnel have been stationed at this facility for the last two years and DOE representatives regularly visit this location to oversee the continuing cooperative activities. Continued future cooperation is planned. A Russian news report in September 1999 indicated that 75 metric tons of organic peroxides stored at the Plastics Plant near Aktau were in danger of exploding and killing or injuring nearby residents. To ensure the health and safety of the personnel at the BN350 site, the DOE conducted a study to investigate the potential danger to the BN350 site posed by these materials at the Plastics Plant. The study conclusion was that while the organic peroxides do have hazards associated with them, the BN350 site is a safe distance from the Plastics Plant. Further, because the Plastics Plant and MAEC have cooperative fire-fighting agreements,and the Plastics Plant had exhausted its reserve of fire-fighting foam, there was the possibility of the Plastics Plant depleting the store of fire-fighting foam at the BN350 site. Subsequently, the DOE decided to purchase fire-fighting foam for the Plastics Plant to ensure the availability of free-fighting foam at the BN350 site.

  2. Generalized Plastic Mechanics and Its Application

    Institute of Scientific and Technical Information of China (English)

    Zheng Yingren; Kong Liang

    2006-01-01

    The development of geotechnical plasticity is reviewed and some problems of applying the classical plastic mechanics (CPM) to geomaterials are analyzed, and then CPM's three hypotheses not fitted the deformation mechanism of geomaterials are pointed out. By giving up the three hypotheses, a generalized plastic potential theory can be obtained from solid mechanics directly, and then the traditional plastic mechanics can be changed to a more generalized plastic mechanics, namely generalized plastic mechanics (GPM). The GPM adopts the component theory as theoretical base, so it can reflect the influence of transition of stress path. The unreasonable phenomena such as excessive dilatancy caused by adopting the normality-flow law can be avoided, and the error caused by the arbitrary assumption of plastic potential surfaces cannot be produced. The yield surface theory, hardening laws and stress-strain relations of GPM are given, and a GPM including the rotation of principal stress axes is also established. It is pointed out that the yield condition is a state parameter as well as a test parameter, and it can only be given by test. After the practical application, it is shown that the GPM cannot only be applied to the modeling theory of geomaterials but also to other fields of geomechanics such as limit analysis.

  3. Ion radiation damage in plastic detectors

    Energy Technology Data Exchange (ETDEWEB)

    Balcazar, M

    2006-07-01

    Plastic detectors are widely used for particle identification, micro pore and nano pore technology, neutron, gamma, radon and electron dosimeters. For some applications, plastic detectors have unique advantages among electronic detectors as 4 solid angles for ion identification in nuclear and cosmic ray physics; low-cost for massive use in indoors radon and neutron dosimeters; wide dose-range response for gamma and electron dosimetry; easy to use detectors in active geological faults in prospecting geothermal energy etc. There is a grate diversity of plastic detectors, which further improves their use in a particular application. However, the comparison test between different kinds of plastics can be time consuming, being therefore necessary to have methods for rapidly assessing plastic detectors properties. This invited talk deals in the first part with overview applications in Mexico of plastic detectors mentioned in the first paragraph. In the second part presents a general experimental relationship between the diameter-grow of positive ions tracks in several plastics for light ions, that allow to compare their energy resolution and to predict the track diameter of isotopes beams, as well as to predict the uniformity of micro pores. The formation of Nano pores produced by {sup 238} U ions is also discussed. (Author)

  4. Plastic debris in the open ocean

    Science.gov (United States)

    Cózar, Andrés; Echevarría, Fidel; González-Gordillo, J. Ignacio; Irigoien, Xabier; Úbeda, Bárbara; Hernández-León, Santiago; Palma, Álvaro T.; Navarro, Sandra; García-de-Lomas, Juan; Ruiz, Andrea; Fernández-de-Puelles, María L.; Duarte, Carlos M.

    2014-01-01

    There is a rising concern regarding the accumulation of floating plastic debris in the open ocean. However, the magnitude and the fate of this pollution are still open questions. Using data from the Malaspina 2010 circumnavigation, regional surveys, and previously published reports, we show a worldwide distribution of plastic on the surface of the open ocean, mostly accumulating in the convergence zones of each of the five subtropical gyres with comparable density. However, the global load of plastic on the open ocean surface was estimated to be on the order of tens of thousands of tons, far less than expected. Our observations of the size distribution of floating plastic debris point at important size-selective sinks removing millimeter-sized fragments of floating plastic on a large scale. This sink may involve a combination of fast nano-fragmentation of the microplastic into particles of microns or smaller, their transference to the ocean interior by food webs and ballasting processes, and processes yet to be discovered. Resolving the fate of the missing plastic debris is of fundamental importance to determine the nature and significance of the impacts of plastic pollution in the ocean. PMID:24982135

  5. Phenotypic plasticity and diversity in insects.

    Science.gov (United States)

    Moczek, Armin P

    2010-02-27

    Phenotypic plasticity in general and polyphenic development in particular are thought to play important roles in organismal diversification and evolutionary innovation. Focusing on the evolutionary developmental biology of insects, and specifically that of horned beetles, I explore the avenues by which phenotypic plasticity and polyphenic development have mediated the origins of novelty and diversity. Specifically, I argue that phenotypic plasticity generates novel targets for evolutionary processes to act on, as well as brings about trade-offs during development and evolution, thereby diversifying evolutionary trajectories available to natural populations. Lastly, I examine the notion that in those cases in which phenotypic plasticity is underlain by modularity in gene expression, it results in a fundamental trade-off between degree of plasticity and mutation accumulation. On one hand, this trade-off limits the extent of plasticity that can be accommodated by modularity of gene expression. On the other hand, it causes genes whose expression is specific to rare environments to accumulate greater variation within species, providing the opportunity for faster divergence and diversification between species, compared with genes expressed across environments. Phenotypic plasticity therefore contributes to organismal diversification on a variety of levels of biological organization, thereby facilitating the evolution of novel traits, new species and complex life cycles.

  6. MODULATING EXCITATION THROUGH PLASTICITY AT INHIBITORY SYNAPSES

    Directory of Open Access Journals (Sweden)

    Vivien eChevaleyre

    2014-03-01

    Full Text Available Learning is believed to depend on lasting changes in synaptic efficacy such as long-term potentiation and long-term depression. As a result, a profusion of studies has tried to elucidate the mechanisms underlying these forms of plasticity. Traditionally, experience-dependent changes at excitatory synapses were assumed to underlie learning and memory formation. However, with the relatively more recent investigation of inhibitory transmission, it had become evident that inhibitory synapses are not only plastic, but also provide an additional way to modulate excitatory transmission and the induction of plasticity at excitatory synapses.Thanks to recent technological advances, progress has been made in understanding synaptic transmission and plasticity from particular interneuron subtypes. In this review article, we will describe various forms of synaptic plasticity that have been ascribed to two fairly well characterized populations of interneurons in the hippocampus, those expressing cholecystokinin (CCK and parvalbumin (PV. We will discuss the resulting changes in the strength and plasticity of excitatory transmission that occur in the local circuit as a result of the modulation of inhibitory transmission. We will focus on the hippocampus because this region has a relatively well-understood circuitry, numerous forms of activity-dependent plasticity and a multitude of identified interneuron subclasses.

  7. Plastic debris in the open ocean.

    Science.gov (United States)

    Cózar, Andrés; Echevarría, Fidel; González-Gordillo, J Ignacio; Irigoien, Xabier; Ubeda, Bárbara; Hernández-León, Santiago; Palma, Alvaro T; Navarro, Sandra; García-de-Lomas, Juan; Ruiz, Andrea; Fernández-de-Puelles, María L; Duarte, Carlos M

    2014-07-15

    There is a rising concern regarding the accumulation of floating plastic debris in the open ocean. However, the magnitude and the fate of this pollution are still open questions. Using data from the Malaspina 2010 circumnavigation, regional surveys, and previously published reports, we show a worldwide distribution of plastic on the surface of the open ocean, mostly accumulating in the convergence zones of each of the five subtropical gyres with comparable density. However, the global load of plastic on the open ocean surface was estimated to be on the order of tens of thousands of tons, far less than expected. Our observations of the size distribution of floating plastic debris point at important size-selective sinks removing millimeter-sized fragments of floating plastic on a large scale. This sink may involve a combination of fast nano-fragmentation of the microplastic into particles of microns or smaller, their transference to the ocean interior by food webs and ballasting processes, and processes yet to be discovered. Resolving the fate of the missing plastic debris is of fundamental importance to determine the nature and significance of the impacts of plastic pollution in the ocean.

  8. Surface properties of beached plastic pellets.

    Science.gov (United States)

    Fotopoulou, Kalliopi N; Karapanagioti, Hrissi K

    2012-10-01

    The presence of pollutants on plastic debris is an emerging environmental hot topic. Understanding the surface alteration of plastics while in the marine environment increases our understanding of the pollutant-plastic debris interaction. Plastic pellets are widely distributed throughout the world oceans. Eroded and virgin polyethylene (PE) and polypropylene (PP) pellets were studied for their surface properties to better understand the interaction between plastic and compounds in marine environment. Surface properties such as point of zero charge, surface area and pore volume, surface topography, functional groups and acid-base behavior are important factors which affect sorption. Virgin plastic pellets had homogeneous smooth surfaces that do not have any acid-base behavior. Eroded PE demonstrates an altered surface that at seawater pH acquires a negative charge due to ketone groups. The uneven surface and possible functional groups could have been formed from the erosion processes while floating at the sea surface and might explain the interaction of eroded plastics with microbes and metals. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Microbial Enzymatic Degradation of Biodegradable Plastics.

    Science.gov (United States)

    Roohi; Bano, Kulsoom; Kuddus, Mohammed; Zaheer, Mohammed R; Zia, Qamar; Khan, Mohammed F; Ashraf, Ghulam Md; Gupta, Anamika; Aliev, Gjumrakch

    2017-01-01

    The renewable feedstock derived biodegradable plastics are important in various industries such as packaging, agricultural, paper coating, garbage bags and biomedical implants. The increasing water and waste pollution due to the available decomposition methods of plastic degradation have led to the emergence of biodegradable plastics and biological degradation with microbial (bacteria and fungi) extracellular enzymes. The microbes utilize biodegradable polymers as the substrate under starvation and in unavailability of microbial nutrients. Microbial enzymatic degradation is suitable from bioremediation point of view as no waste accumulation occurs. It is important to understand the microbial interaction and mechanism involved in the enzymatic degradation of biodegradable plastics under the influence of several environmental factors such as applied pH, thermo-stability, substrate molecular weight and/or complexity. To study the surface erosion of polymer film is another approach for hydrolytic degradation characteristion. The degradation of biopolymer is associated with the production of low molecular weight monomer and generation of carbon dioxide, methane and water molecule. This review reported the degradation study of various existing biodegradable plastics along with the potent degrading microbes (bacteria and fungi). Patents available on plastic biodegradation with biotechnological significance is also summarized in this paper. This paper assesses that new disposal technique should be adopted for the degradation of polymers and further research is required for the economical production of biodegradable plastics along with their enzymatic degradation. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  10. Plastic debris in the open ocean

    KAUST Repository

    Cozar, Andres

    2014-06-30

    There is a rising concern regarding the accumulation of floating plastic debris in the open ocean. However, the magnitude and the fate of this pollution are still open questions. Using data from the Malaspina 2010 circumnavigation, regional surveys, and previously published reports, we show a worldwide distribution of plastic on the surface of the open ocean, mostly accumulating in the convergence zones of each of the five subtropical gyres with comparable density. However, the global load of plastic on the open ocean surface was estimated to be on the order of tens of thousands of tons, far less than expected. Our observations of the size distribution of floating plastic debris point at important size-selective sinks removing millimeter-sized fragments of floating plastic on a large scale. This sink may involve a combination of fast nano-fragmentation of the microplastic into particles of microns or smaller, their transference to the ocean interior by food webs and ballasting processes, and processes yet to be discovered. Resolving the fate of the missing plastic debris is of fundamental importance to determine the nature and significance of the impacts of plastic pollution in the ocean.

  11. Plasticity predicts evolution in a marine alga.

    Science.gov (United States)

    Schaum, C Elisa; Collins, Sinéad

    2014-10-22

    Under global change, populations have four possible responses: 'migrate, acclimate, adapt or die' (Gienapp et al. 2008 Climate change and evolution: disentangling environmental and genetic response. Mol. Ecol. 17, 167-178. (doi:10.1111/j.1365-294X.2007.03413.x)). The challenge is to predict how much migration, acclimatization or adaptation populations are capable of. We have previously shown that populations from more variable environments are more plastic (Schaum et al. 2013 Variation in plastic responses of a globally distributed picoplankton species to ocean acidification. Nature 3, 298-230. (doi:10.1038/nclimate1774)), and here we use experimental evolution with a marine microbe to learn that plastic responses predict the extent of adaptation in the face of elevated partial pressure of CO2 (pCO2). Specifically, plastic populations evolve more, and plastic responses in traits other than growth can predict changes in growth in a marine microbe. The relationship between plasticity and evolution is strongest when populations evolve in fluctuating environments, which favour the evolution and maintenance of plasticity. Strikingly, plasticity predicts the extent, but not direction of phenotypic evolution. The plastic response to elevated pCO2 in green algae is to increase cell division rates, but the evolutionary response here is to decrease cell division rates over 400 generations until cells are dividing at the same rate their ancestors did in ambient CO2. Slow-growing cells have higher mitochondrial potential and withstand further environmental change better than faster growing cells. Based on this, we hypothesize that slow growth is adaptive under CO2 enrichment when associated with the production of higher quality daughter cells.

  12. Effects of larval habitat substrate on pyriproxyfen efficacy against Aedes albopictus (Diptera: Culicidae).

    Science.gov (United States)

    Suman, Devi Shankar; Wang, Yi; Dong, Limin; Gaugler, Randy

    2013-11-01

    Pyriproxyfen, a juvenile hormone analog insect growth regulator (IGR), is a recommended insecticide for the control of container-inhabiting mosquitoes. The effects of eight container substrates (three plastics, wood, tire rubber, clay pot, concrete, and glass) were studied on reduction of bio-efficacy of pyriproxyfen for Aedes albopictus (Skuse) in the laboratory. Insect growth regulator-bioassay of third instars showed significant increase of LC50 with some substrates compared with control probably because of pyriproxyfen adsorption to the substrate. The LC50 for the control substrate (glass mug) was 0.029 microg/liter. In comparison to the control, LC50 increased 150.1 times with tire rubber (4.354 microg/liter) and 8-10 times with wood and high-density polyethylene plastic containers. Slight increases of LC50 were detected for clay pots, polypropylene, and polystyrene plastics (1.9-2.7 times). Pyriproxyfen efficacy with concrete substrate was higher than with glass containers, which might be caused by high pH. The pH of water with wood (5.6) and concrete (9.8) substrates differed from the other substrates tested (6.3-7.1). There was no pupal mortality at pH 5-11 without pyriproxyfen; however, interaction of pH (5-11) with pyriproxyfen (0.05 microg/liter) showed additive effects at both low and high pH values. Different substrates have variable impacts on pyriproxyfen efficacy, which might be associated with the failure of larval control strategies for the container mosquitoes under certain field conditions.

  13. What are the limits to cell plasticity?

    Institute of Scientific and Technical Information of China (English)

    Jane Taylor; Ian Wilmut; Gareth Sullivan

    2010-01-01

    @@ It is now well established that the fate of a somatic cell is not fixed rigidly and that there is a significant degree of cell plasticity. The term plasticity refers to the opportunity to change differentiated cells from one cell type to another. Over the past 25 years a series of papers have each demonstrated that plasticity is wider than had previously been under-stood [1-4]. An exciting recent article by Thomas Vierbuchen and colleagues at Stanford University extended that series by describing a method for directly re-programming mouse fibroblast cells into neurons without the need to generate a stem cell intermediary.

  14. Functional nanostructures on injection molded plastic

    DEFF Research Database (Denmark)

    Johansson, Alicia Charlotte; Søgaard, Emil; Andersen, Nis Korsgaard

    Nanotechnology can be used to make inexpensive plastic parts with functional surfaces. The plastic parts can be molded using a standard injection molding process. The nanostructures are directly transferred from the surface of the molding tool to the surface of the molded plastic part during...... the molding process. The main advantage with this method is that surface treatments and chemical additives are avoided, which minimizes health risks and simplifies recycling. Another advantage is that the unique technology enables nanostructuring of free form molded parts. The functional surfaces can have...

  15. Making environmental sensors on plastic foil

    Directory of Open Access Journals (Sweden)

    Danick Briand

    2011-09-01

    Full Text Available With the emergence of the printed electronics industry, the development of sensing technologies on non conventional substrates such as plastic foils is on-going. In this article, we review the work performed and the trends in the development of environmental sensors on plastic and flexible foils. Our main focus is on the integration of temperature, humidity, and gas sensors on plastic substrates targeting low-power operation for wireless applications. Some perspectives in this dynamic field are also provided showing the potential for the realization of several types of transducers on substrates of different natures and their combination with other components to realize smart systems.

  16. Cooling simulation of plastic injection molding

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Analyses the cooling of mold and plastic part during injectionmolding and the continued cooling of plastic part after being ejected from mold using the heat transfer theory and Boundary Element Method (BEM) to predict the temperature distribution in both mold and plastic part,and presents the experiments carried out with plates of ABS (Acrylonitrile-Butadiene-Styrene) to verify the validity of the cooling analysis software used to simulate the temperature distribution in ABS plate parts, and concludes that the analysis software agree qualitatively well with actual experimental findings.

  17. Plasticity in Ultra Fine Grained Materials

    Energy Technology Data Exchange (ETDEWEB)

    Koslowski, Marisol [Purdue Univ., West Lafayette, IN (United States)

    2015-04-15

    Understanding the mechanisms of deformation of nanocrystalline (nc) materials is critical to the design of micro and nano devices and to develop materials with superior fracture strength and wear resistance for applications in new energy technologies. In this project we focused on understanding the following plastic deformation processes described in detail in the following sections: 1. Plastic strain recovery (Section 1). 2. Effect of microstructural variability on the yield stress of nc metals (Section 2). 3. The role of partial and extended full dislocations in plastic deformation of nc metals (Section 3).

  18. PLASTICITY IN THE ADULT CENTRAL AUDITORY SYSTEM.

    Science.gov (United States)

    Irvine, Dexter R F; Fallon, James B; Kamke, Marc R

    2006-04-01

    The central auditory system retains into adulthood a remarkable capacity for plastic changes in the response characteristics of single neurons and the functional organization of groups of neurons. The most dramatic examples of this plasticity are provided by changes in frequency selectivity and organization as a consequence of either partial hearing loss or procedures that alter the significance of particular frequencies for the organism. Changes in temporal resolution are also seen as a consequence of altered experience. These forms of plasticity are likely to contribute to the improvements exhibited by cochlear implant users in the post-implantation period.

  19. PLASTICITY IN THE ADULT CENTRAL AUDITORY SYSTEM

    Science.gov (United States)

    Irvine, Dexter R. F.; Fallon, James B.; Kamke, Marc R.

    2007-01-01

    The central auditory system retains into adulthood a remarkable capacity for plastic changes in the response characteristics of single neurons and the functional organization of groups of neurons. The most dramatic examples of this plasticity are provided by changes in frequency selectivity and organization as a consequence of either partial hearing loss or procedures that alter the significance of particular frequencies for the organism. Changes in temporal resolution are also seen as a consequence of altered experience. These forms of plasticity are likely to contribute to the improvements exhibited by cochlear implant users in the post-implantation period. PMID:17572797

  20. Plasticity size effects in voided crystals

    DEFF Research Database (Denmark)

    Hussein, M. I.; Borg, Ulrik; Niordson, Christian Frithiof;

    The shear and equi-biaxial straining responses of periodic voided single crystals are analysed using discrete dislocation plasticity and a continuum strain gradient crystal plasticity theory. In the discrete dislocation formulation the dislocations are all of edge character and are modelled as line...... predictions of the two formulations for all crystal types and void volume fractions considered when the material length scale in the non-local plasticity model chosen to be $0.325\\mu m$ (around ten times the slip plane spacing in the discrete dislocation models)....

  1. A Plastic Bottle in Rectosigmoid

    Directory of Open Access Journals (Sweden)

    A. Derakhshanfar

    2007-07-01

    Full Text Available Introduction: Evaluation and treatment of foreign bodies in rectum involves careful history and physical examination. The cases of forced introduction of the objects most commonly are , sexual assault , self – introduced for anal eroticism and accidental insertion.Case Report: We describe a case of a patient with rectal impaction following self administration of a plastic bottle for anal sexual gratification. A 49 years old man was admitted in the emergency department with the history of self introduced a bottle into his rectum physical examination and abdominal X-Ray diagnosed the case as impacted foreign body in rectosigmoid. An attempt was made to deliver the bottle through the rectum but because of high lying big bottle in the sigmoid laporotomy was performed and the bottle was removed though a longitudinal incision on sigmoid colon.Conclusion: Retained rectosigmoid foreign bodies have been encountered more frequently and present a dilemma for management and rarely laporotomy for extraction of foreign bodies was performed.

  2. SLEEP AND OLFACTORY CORTICAL PLASTICITY

    Directory of Open Access Journals (Sweden)

    Dylan eBarnes

    2014-04-01

    Full Text Available In many systems, sleep plays a vital role in memory consolidation and synaptic homeostasis. These processes together help store information of biological significance and reset synaptic circuits to facilitate acquisition of information in the future. In this review, we describe recent evidence of sleep-dependent changes in olfactory system structure and function which contribute to odor memory and perception. During slow-wave sleep, the piriform cortex becomes hypo-responsive to odor stimulation and instead displays sharp-wave activity similar to that observed within the hippocampal formation. Furthermore, the functional connectivity between the piriform cortex and other cortical and limbic regions is enhanced during slow-wave sleep compared to waking. This combination of conditions may allow odor memory consolidation to occur during a state of reduced external interference and facilitate association of odor memories with stored hedonic and contextual cues. Evidence consistent with sleep-dependent odor replay within olfactory cortical circuits is presented. These data suggest that both the strength and precision of odor memories is sleep-dependent. The work further emphasizes the critical role of synaptic plasticity and memory in not only odor memory but also basic odor perception. The work also suggests a possible link between sleep disturbances that are frequently co-morbid with a wide range of pathologies including Alzheimer’s disease, schizophrenia and depression and the known olfactory impairments associated with those disorders.

  3. On innovations in plastic surgery.

    Science.gov (United States)

    Mehta, Hemant

    2009-04-01

    The progress of surgery has been utterly dependent on continuing innovations by surgeon innovators, largely because surgeons work in an environment that is very conducive to innovating. Of all clinicians surgeons excel at improvisations and innovations. The aim of this review is to outline some of my innovations, the circumstances leading to their origin, and to explain some of the fundamental concepts behind those innovations, with a view to inviting and encouraging younger surgeons to consider breaking away - sensibly - from convention at times, and embark on a journey towards innovation. The context and the qualities required of a would-be innovator are explained and the process of innovation itself is analysed. Rigid adherence to prevailing assumptions and practices stifles originality, while adopting a questioning attitude with a smidgen of irreverence facilitates innovation. That an innovation has resulted purely by a chance observation or occurrence - serendipity - may render it less glamorous but never less useful. Innovations in surgical techniques necessitate adoption of a novel pragmatic surgical philosophy. Confined as they are to Oculoplasty, the concepts of innovations cited and illustrated in this review, are equally valid for Plastic surgery and indeed for Surgery in general. Working in a small hospital or an isolated Institution need not be a hindrance to a would-be innovator.

  4. Updating quasar bolometric luminosity corrections - III. [O iii] bolometric corrections

    Science.gov (United States)

    Pennell, Alison; Runnoe, Jessie C.; Brotherton, M. S.

    2017-06-01

    We present quasar bolometric corrections using the [O III] λ 5007 narrow emission line luminosity based on the detailed spectral energy distributions of 53 bright quasars at low to moderate redshift (0.0345 diversity, introduces scatter into the L_{[O III]}-Liso relationship. We found that the {[O III]} bolometric correction can be significantly improved by adding a term including the equivalent width ratio R_{Fe II} ≡ EW_{{Fe II}}/EW_{Hβ }, which is an EV1 indicator. Inclusion of R_{Fe II} in predicting Liso is significant at nearly the 3σ level and reduces the scatter and systematic offset of the luminosity residuals. Typically, {[O III]} bolometric corrections are adopted for Type 2 sources where the quasar continuum is not observed and in these cases, R_{Fe II} cannot be measured. We searched for an alternative measure of EV1 that could be measured in the optical spectra of Type 2 sources but were unable to identify one. Thus, the main contribution of this work is to present an improved {[O III]} bolometric correction based on measured bolometric luminosities and highlight the EV1 dependence of the correction in Type 1 sources.

  5. Plastic, Fantastic? What We Make. Science and Technology Education in Philippine Society.

    Science.gov (United States)

    Philippines Univ., Quezon City. Inst. for Science and Mathematics Education Development.

    This module provides information about plastics, focusing on the uses of plastic bags in particular. Topic areas considered include: (1) making plastic bags; (2) transparency of plastic bags; (3) plastic bags and food odors; (4) food containers (before and since plastics); and (5) disposing of plastic bags and other plastic products. The text is…

  6. Vapor pressure measured with inflatable plastic bag

    Science.gov (United States)

    1965-01-01

    Deflated plastic bag in a vacuum chamber measures initial low vapor pressures of materials. The bag captures the test sample vapors and visual observation of the vapor-inflated bag under increasing external pressures yields pertinent data.

  7. Pathological Plasticity in Fragile X Syndrome

    Directory of Open Access Journals (Sweden)

    Brandon S. Martin

    2012-01-01

    Full Text Available Deficits in neuronal plasticity are common hallmarks of many neurodevelopmental disorders. In the case of fragile-X syndrome (FXS, disruption in the function of a single gene, FMR1, results in a variety of neurological consequences directly related to problems with the development, maintenance, and capacity of plastic neuronal networks. In this paper, we discuss current research illustrating the mechanisms underlying plasticity deficits in FXS. These processes include synaptic, cell intrinsic, and homeostatic mechanisms both dependent on and independent of abnormal metabotropic glutamate receptor transmission. We place particular emphasis on how identified deficits may play a role in developmental critical periods to produce neuronal networks with permanently decreased capacity to dynamically respond to changes in activity central to learning, memory, and cognition in patients with FXS. Characterizing early developmental deficits in plasticity is fundamental to develop therapies that not only treat symptoms but also minimize the developmental pathology of the disease.

  8. Sol-gel antireflective coating on plastics

    Science.gov (United States)

    Ashley, Carol S.; Reed, Scott T.

    1990-01-01

    An antireflection film made from a reliquified sol-gel hydrolyzation, condensation polymeric reaction product of a silicon, alkoxides and/or metal alkoxides, or mixtures thereof. The film is particularly useful for coating plastics.

  9. Kainate receptors: multiple roles in neuronal plasticity.

    Science.gov (United States)

    Sihra, Talvinder S; Flores, Gonzalo; Rodríguez-Moreno, Antonio

    2014-02-01

    Ionotropic glutamate receptors of the N-methyl-d-aspartate (NMDA)- and AMPA-type, as well as metabotropic glutamate receptors have been extensively invoked in plasticity. Until relatively recently, however, kainate-type receptors (KARs) had been the most elusive to study because of the lack of appropriate pharmacological tools to specifically address their roles. With the development of selective glutamate receptor antagonists, and knockout mice with specific KAR subunits deleted, the functions of KARs in neuromodulation and synaptic transmission, together with their involvement in some types of plasticity, have been extensively probed in the central nervous system. In this review, we summarize the findings related to the roles of KARs in short- and long-term forms of plasticity, primarily in the hippocampus, where KAR function and synaptic plasticity have received avid attention.

  10. Ethics and the facial plastic surgeon.

    Science.gov (United States)

    Sethi, Neeraj

    2016-09-01

    The facial plastic surgeon potentially has a conflict of interest when confronted with the patients requesting surgery, due to the personal gain attainable by agreeing to perform surgery. The aim of this review is to discuss the potential harm the surgeon can inflict by carrying out facial plastic surgery, beyond the standard surgical complications of infection or bleeding. It will discuss the desire for self-improvement and perfection and increase in the prevalence facial plastic surgery. We address the principles of informed consent, beneficence and non-maleficence, as well as justice and equality and how the clinician who undertakes facial plastic surgery is at risk of breaching these principles without due care and diligence.

  11. Clear plastic cups: a childhood choking hazard.

    Science.gov (United States)

    Weiss, R L; Goldstein, M N; Dharia, A; Zahtz, G; Abramson, A L; Patel, M

    1996-11-01

    The disposable plastic beverage cup is not usually regarded as hazardous to young children. Certain varieties of these products however, are manufactured from a brittle, clear plastic that easily cracks and fragments. While most conscientious parents keep their children safe from peanuts, balloons, and other known choking hazards, a child can surreptitiously bite a cup edge and aspirate the fragment. We report two cases of foreign body aspiration involving clear plastic cups that went undetected one of which remained 21 months following a negative rigid bronchoscopy. Diagnostic difficulties are related to the transparency and radiolucency of these objects. When suspicious of foreign body aspiration in children, otolaryngologists should inquire about the availability of clear plastic cups in the household and be mindful of the diagnostic pitfalls. Further investigations including CT scanning and repeat bronchoscopy may be helpful in cases of suspected missed foreign bodies. An educational campaign aimed at prevention and placement of product package warning labels should be established.

  12. PLASTICITY AND NON-LINEAR ELASTIC STRAINS

    Science.gov (United States)

    conditions existing in plane waves in an extended medium to give the time rate of change of stress as a function of the time rate of change of strain, the stress invariants, the total strain and the plastic strain. (Author)

  13. Programming perpetual T helper cell plasticity.

    Science.gov (United States)

    Rowell, Emily; Wilson, Christopher B

    2009-01-16

    In this issue of Immunity,Lee et al. (2009) and Wei et al. (2009) each investigate the stability of T helper cell lineages and find that commitment to these fates is more plastic than previously appreciated.

  14. Fundamentals of the theory of plasticity

    CERN Document Server

    Kachanov, L M

    2004-01-01

    Intended for use by advanced engineering students and professionals, this volume focuses on plastic deformation of metals at normal temperatures, as applied to strength of machines and structures. 1971 edition.

  15. LAMP Joining between Ceramic and Plastic

    Science.gov (United States)

    Kawahito, Yousuke; Nishimoto, Kouji; Katayama, Seiji

    Joining of dissimilar materials is necessary and important from a manufacturing viewpoint. Therefore, the authors have developed a new laser direct joining method between a metal and a plastic which is named Laser Assisted Metal and Plastic (LAMP) joining method. In this research, LAMP joining was applied to join silicon nitride Si3N4 ceramic and polyethylene terephthalate (PET) engineering plastic, although metal was replaced by ceramic. The tensile shear strength of obtained joints was 3100 N at the maximum, which was strong enough to elongate a PET base plate of 2 mm in thickness and 30 mm in width. Moreover, transmission electron microscopes (TEM) observation demonstrates that the ceramic and the plastic are tightly bonded on atomic or molecular sized level.

  16. VISCO-ELASTIC (PLASTIC) EFFECTS AND FAILURE BEHAVIOR OF PUR FOAMED PLASTICS

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    The viscous effects and failure behavior of PUR foamed plastics are investigated by the cycling loading and preloading experiments. On the basis of static and dynamic compressive experiments, the SEM analysis is given for the PUR foamed plastics specimens which have been tested and the deformation as well as failure mechanisms are determined at the same time. In addition, the relaxation characteristics and the failure criterion of foamed plastics are discussed adequately.

  17. The ecology and larval habitats characteristics of anopheline mosquitoes (Diptera: Culicidae) in Aligudarz County (Luristan province, western Iran).

    Science.gov (United States)

    Amani, Hamid; Yaghoobi-Ershadi, Mohammad Reza; Kassiri, Hamid

    2014-05-01

    To determine ecology and characteristics of the larval habitats of the genus Anopheles (Dipetra: Culicidae) in Aligudarz County, western Iran. This descriptive cross-sectional research was carried out to study the anopheline larvae ecology in seven rural districts, Aligudarz County, from late April to late November 1997. Larvae were captured using the dipping method. Larval breeding places characteristics were noted according to water situation (turbid or clean, stagnant or running), substrate type, site type (man-made or natural), sunlight situation, site situation (transient or permanent, with or without vegetation). A total of 9 620 3rd and 4th instar larvae of Anopheles from 115 breeding places in 22 villages were captured, which belonged to the following species: Anopheles stephensi, Anopheles d'thali, Anopheles apoci, Anopheles superpictus (forms A and B), Anopheles marterii sogdianus, Anopheles turkhodi, Anopheles maculipennis S.L and Anopheles claviger. Anopheles stephensi, Anopheles maculipennis S.L and Anopheles apoci were collected for the first time in this county. Anopheles superpictus (93.18%) was the most prevailed one and dispersed over the entire region. Larval habitats consisted of nine natural and three artificial larval habitats. The most important larval habitats were river edges (54.8%), rice fields (12.2%), and grassland (8.7%) with permanent or transient, stagnant or running and clean water, with or without vegetation, sand or mud substrate in full sunlight area. Regarding this research, river edges and rice fields are the most important breeding places of malaria vectors in Aligudarz County. It is worthy of note in larvicidal programs.

  18. The Influence of Ambient Temperature on the Susceptibility of Aedes aegypti (Diptera: Culicidae) to the Pyrethroid Insecticide Permethrin.

    Science.gov (United States)

    Whiten, Shavonn R; Peterson, Robert K D

    2016-01-01

    Insecticides are the most common strategy used for the management of mosquitoes. Changes in ambient temperature can alter the toxicity of insecticides to ectothermic organisms. Studies show organophosphate insecticides exhibit a positive correlation between ambient temperature and mortality for many insect species, and carbamate insecticides exhibit a slightly negative correlation between ambient temperature and mortality. Pyrethroid insecticides exhibit a distinctly negative correlation between increasing ambient temperature and mortality for insects. However, this relationship has not been systematically studied for adult mosquitoes. Therefore, we examined the influence of temperature on the susceptibility of adult Aedes aegypti L. (Diptera: Culicidae) when exposed to permethrin. The median lethal concentration, LC50, was estimated for adult Ae. aegypti when exposed to eight concentrations of permethrin (ranging from 0.06–0.58 ng/cm2) at each of the following temperatures—16, 23, 26, 30, 32, and 34C—for 24 h in bottle assays. The estimated LC50 for each temperature was 0.26, 0.36, 0.36, 0.45, 0.27, and 0.31 ng/cm2, respectively. Results indicated a negative correlation between temperature and mortality from 16 to 30C, a positive correlation between temperature and mortality from 30 to 32C, and a negative correlation between temperature and mortality from 32 to 34C. If mosquito populations are expanding in space and time because of increased ambient temperatures and cannot be managed as effectively with pyrethroids, the spread of mosquito-borne diseases may pose considerable additional risk to public health.

  19. Susceptibility of Culicidae Mosquitoes to Some Insecticides Recommended by WHO in a Malaria Endemic Area of Southeastern Iran

    Directory of Open Access Journals (Sweden)

    Mousa Fathian

    2015-10-01

    Full Text Available Background: According to the national strategy plan on monitoring of insecticides resistance, this study was carried out to determine the base line susceptibility of the Culicidae mosquitoes to the WHO-recommended insecticides in an endemic focus of malaria in southeastern Iran.Methods: Larval collection was carried out by dipping method and adult collection occurred by suction tube from January to December 2010. The susceptibility test was assessed to DDT 4 %, malathion 5 %, propoxur 0.1 %, deltamethrin 0.05 %, lambda-cyhalothrin 0.05 %, and cyfluthrin 0.15 % at different interval times (discriminative dose followed by 24 h recovery period . The LT50 and LT90 values were calculated for plotting the regression line using Microsoft office Excel software ver. 2007.Results: Anopheles stephensi was quite resistant to DDT and showed susceptible or tolerant to other insecticides. The LT50 and LT90 values to DDT in this species were 29.07, and 98.26 minutes, respectively. Anopheles culicifacies and Anopheles dthali were found susceptible or tolerant to insecticides. Culex pipiens was found resistance to DDT, propoxur, lambda-cyhalothrin and cyfluthrin whereas observed susceptible to malathion and tolerant to deltamethrin. Ochlerotatus caspius sl. was resistant to DDT, whereas found susceptible to other insecticides. Culisita longiareolatawas susceptible to deltamethrin, whereas tolerant to other insecticides. The LT50 and LT90 values of Cs. longiareolata to DDT were 17.82, and 51.26 minutes.Conclusion: We suggested the same study in different parts of the country for monitoring and evaluation of control measures.

  20. Larvicidal & ovicidal efficacy of Pithecellobium dulce (Roxb. Benth. (Fabaceae against Anopheles stephensi Liston & Aedes aegypti Linn. (Diptera: Culicidae

    Directory of Open Access Journals (Sweden)

    M Govindarajan

    2013-01-01

    Full Text Available Background & objectives: In view of the recently increased interest in developing plant origin insecticides as an alternative to chemical insecticide, this study was undertaken to assess the larvicidal and ovicidal potential of the crude hexane, benzene, chloroform, ethyl acetate and methanol solvent extracts from the medicinal plant Pithecellobium dulce against the mosquito vectors, Anopheles stephensi and Aedes aegypti (Diptera: Culicidae. Methods: Larvicidal activity of P. dulce plant extracts was studied in the range of 60 to 450 mg/l against early third instar larvae of An. stephensi and Ae. aegypti in the laboratory. The larval mortality was observed after 24 h of exposure. The ovicidal activity was determined against An. stephensi and Ae. aegypti to various concentrations ranging from 100 to 750 mg/l under the laboratory conditions. Mean per cent hatchability of the eggs were observed after 48 h post treatment. Results: All leaf and seed extracts showed moderate larvicidal and ovicidal effects; however, the highest larval mortality was found in methanol extract of leaf of P. dulce against the larvae of An. stephensi and Ae. aegypti with the LC 50 and LC 90 values 145.43, 155.78 mg/l and 251.23, 279.73 mg/l, respectively. The per cent hatchability was inversely proportional to the concentration of extract and directly proportional to the eggs. Zero hatchability was observed at 400 mg/l for leaf methanol extract and 625 mg/l for seed methanol extract of P. dulce against An. stephensi and Ae. aegypti, respectively. Compared to leaf extracts, seed extracts have low potency against the two mosquitoes. Interpretation & conclusions: The present results suggest that the leaf and seed extracts of P. dulce have the potential to be used as an ideal eco-friendly approach for the control of mosquitoes.