WorldWideScience

Sample records for cubic silicon carbide

  1. Nonlinear optical imaging of defects in cubic silicon carbide epilayers.

    Science.gov (United States)

    Hristu, Radu; Stanciu, Stefan G; Tranca, Denis E; Matei, Alecs; Stanciu, George A

    2014-06-11

    Silicon carbide is one of the most promising materials for power electronic devices capable of operating at extreme conditions. The widespread application of silicon carbide power devices is however limited by the presence of structural defects in silicon carbide epilayers. Our experiment demonstrates that optical second harmonic generation imaging represents a viable solution for characterizing structural defects such as stacking faults, dislocations and double positioning boundaries in cubic silicon carbide layers. X-ray diffraction and optical second harmonic rotational anisotropy were used to confirm the growth of the cubic polytype, atomic force microscopy was used to support the identification of silicon carbide defects based on their distinct shape, while second harmonic generation microscopy revealed the detailed structure of the defects. Our results show that this fast and noninvasive investigation method can identify defects which appear during the crystal growth and can be used to certify areas within the silicon carbide epilayer that have optimal quality.

  2. Epitaxial and bulk growth of cubic silicon carbide on off-oriented 4H-silicon carbide substrates

    OpenAIRE

    Norén, Olof

    2015-01-01

    The growth of bulk cubic silicon carbide has for a long time seemed to be something for the future. However, in this thesis the initial steps towards bulk cubic silicon carbide have been taken. The achievement of producing bulk cubic silicon carbide will have a great impact in various fields of science and industry such as for example the fields of semiconductor technology within electronic- and optoelectronic devices and bio-medical applications. The process that has been used to grow the bu...

  3. Photonic Crystal Cavities in Cubic Polytype Silicon Carbide Films

    CERN Document Server

    Radulaski, Marina; Buckley, Sonia; Rundquist, Armand; Provine, J; Alassaad, Kassem; Ferro, Gabriel; Vučković, Jelena

    2013-01-01

    We present the design, fabrication, and characterization of high quality factor and small mode volume planar photonic crystal cavities from cubic (3C) thin films (thickness ~ 200 nm) of silicon carbide (SiC) grown epitaxially on a silicon substrate. We demonstrate cavity resonances across the telecommunications band, with wavelengths from 1250 - 1600 nm. Finally, we discuss possible applications in nonlinear optics, optical interconnects, and quantum information science.

  4. Palladium in cubic silicon carbide: Stability and kinetics

    Science.gov (United States)

    Roma, Guido

    2009-12-01

    Several technological applications of silicon carbide are concerned with the introduction of palladium impurities. Be it intentional or not, this may lead to the formation of silicides. Not only this process is not well understood, but the basic properties of palladium impurities in silicon carbide, such as solubility or diffusion mechanisms, are far from being known. Here the stability and kinetics of isolated Pd impurities in cubic silicon carbide are studied by first principles calculations in the framework of density functional theory. The preferential insertion sites, as well as the main migration mechanisms, are analyzed and presented here, together with the results for solution and migration energies. The early stages of nucleation are discussed based on the properties of isolated impurities and the smallest clusters.

  5. Room temperature quantum emission from cubic silicon carbide nanoparticles.

    Science.gov (United States)

    Castelletto, Stefania; Johnson, Brett C; Zachreson, Cameron; Beke, David; Balogh, István; Ohshima, Takeshi; Aharonovich, Igor; Gali, Adam

    2014-08-26

    The photoluminescence (PL) arising from silicon carbide nanoparticles has so far been associated with the quantum confinement effect or to radiative transitions between electronically active surface states. In this work we show that cubic phase silicon carbide nanoparticles with diameters in the range 45-500 nm can host other point defects responsible for photoinduced intrabandgap PL. We demonstrate that these nanoparticles exhibit single photon emission at room temperature with record saturation count rates of 7 × 10(6) counts/s. The realization of nonclassical emission from SiC nanoparticles extends their potential use from fluorescence biomarker beads to optically active quantum elements for next generation quantum sensing and nanophotonics. The single photon emission is related to single isolated SiC defects that give rise to states within the bandgap.

  6. CHARACTERIZATION OF PRECIPITATES IN CUBIC SILICON CARBIDE IMPLANTED WITH 25Mg+ IONS

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Weilin; Spurgeon, Steven R.; Liu, Jia; Edwards, Danny J.; Schreiber, Daniel K.; Henager, Charles H.; Kurtz, Richard J.; Wang, Yongqiang

    2016-09-26

    The aim of this study is to characterize precipitates in Mg+ ion implanted and high-temperature annealed cubic silicon carbide using scanning transmission electron microscopy, electron energy loss spectroscopy and atom probe tomography.

  7. Single-crystal cubic silicon carbide: an in vivo biocompatible semiconductor for brain machine interface devices.

    Science.gov (United States)

    Frewin, Christopher L; Locke, Christopher; Saddow, Stephen E; Weeber, Edwin J

    2011-01-01

    Single crystal silicon carbide (SiC) is a wide band-gap semiconductor which has shown both bio- and hemo-compatibility [1-5]. Although single crystalline SiC has appealing bio-sensing potential, the material has not been extensively characterized. Cubic silicon carbide (3C-SiC) has superior in vitro biocompatibility compared to its hexagonal counterparts [3, 5]. Brain machine interface (BMI) systems using implantable neuronal prosthetics offer the possibility of bi-directional signaling, which allow sensory feedback and closed loop control. Existing implantable neural interfaces have limited long-term reliability, and 3C-SiC may be a material that may improve that reliability. In the present study, we investigated in vivo 3C-SiC biocompatibility in the CNS of C56BL/6 mice. 3C-SiC was compared against the known immunoreactive response of silicon (Si) at 5, 10, and 35 days. The material was examined to detect CD45, a protein tyrosine phosphatase (PTP) expressed by activated microglia and macrophages. The 3C-SiC surface revealed limited immunoresponse and significantly reduced microglia compared to Si substrate.

  8. Bare and boron-doped cubic silicon carbide nanowires for electrochemical detection of nitrite sensitively.

    Science.gov (United States)

    Yang, Tao; Zhang, Liqin; Hou, Xinmei; Chen, Junhong; Chou, Kuo-Chih

    2016-04-25

    Fabrication of eletrochemical sensors based on wide bandgap compound semiconductors has attracted increasing interest in recent years. Here we report for the first time electrochemical nitrite sensors based on cubic silicon carbide (SiC) nanowires (NWs) with smooth surface and boron-doped cubic SiC NWs with fin-like structure. Multiple techniques including scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electron energy loss spectroscopy (EELS) were used to characterize SiC and boron-doped SiC NWs. As for the electrochemical behavior of both SiC NWs electrode, the cyclic voltammetric results show that both SiC electrodes exhibit wide potential window and excellent electrocatalytic activity toward nitrite oxidation. Differential pulse voltammetry (DPV) determination reveals that there exists a good linear relationship between the oxidation peak current and the concentration in the range of 50-15000 μmoL L(-1) (cubic SiC NWs) and 5-8000 μmoL L(-1) (B-doped cubic SiC NWs) with the detection limitation of 5 and 0.5 μmoL L(-1) respectively. Compared with previously reported results, both as-prepared nitrite sensors exhibit wider linear response range with comparable high sensitivity, high stability and reproducibility.

  9. The electrical characteristics of metal-oxide-semiconductor field effect transistors fabricated on cubic silicon carbide

    CERN Document Server

    Ohshima, T; Ishida, Y

    2003-01-01

    The n-channel metal-oxide-semiconductor field effect transistors (MOSFETs) were fabricated on cubic silicon carbide (3C-SiC) epitaxial layers grown on 3C-SiC substrates. The gate oxide of the MOSFETs was formed using pyrogenic oxidation at 1100 degC. The 3C-SiC MOSFETs showed enhancement type behaviors after annealing at 200degC for 30 min in argon atmosphere. The maximum value of the effective channel mobility of the 3C-SiC MOSFETs was 260cm sup 2 /V centre dot s. The leakage current of gate oxide was of a few tens of nA/cm sup 2 at an electric field range below 8.5 MV/cm, and breakdown began around 8.5MV/cm. (author)

  10. Visible Photoluminescence from Cubic (3C) Silicon Carbide Microdisks Coupled to High Quality Whispering Gallery Modes

    CERN Document Server

    Radulaski, Marina; Müller, Kai; Lagoudakis, Konstantinos G; Zhang, Jingyuan Linda; Buckley, Sonia; Kelaita, Yousif A; Alassaad, Kassem; Ferro, Gabriel; Vučković, Jelena

    2014-01-01

    We present the design, fabrication and characterization of cubic (3C) silicon carbide microdisk resonators with high quality factor modes at visible and near infrared wavelengths (600 - 950 nm). Whispering gallery modes with quality factors as high as 2,300 and corresponding mode volumes V ~ 2 ({\\lambda}/n)^3 are measured using laser scanning confocal microscopy at room temperature. We obtain excellent correspondence between transverse-magnetic (TM) and transverse-electric (TE) polarized resonances simulated using Finite Difference Time Domain (FDTD) method and those observed in experiment. These structures based on ensembles of optically active impurities in 3C-SiC resonators could play an important role in diverse applications of nonlinear and quantum photonics, including low power optical switching and quantum memories.

  11. Implantation of high concentration noble gases in cubic zirconia and silicon carbide: A contrasted radiation tolerance

    Energy Technology Data Exchange (ETDEWEB)

    Velişa, Gihan, E-mail: gihan@tandem.nipne.ro [Horia Hulubei National Institute for Physics and Nuclear Engineering, P.O.B. MG-6, 077125 Magurele (Romania); Debelle, Aurélien; Thomé, Lionel; Mylonas, Stamatis [Centre de Sciences Nucléaires et de Sciences de la Matière, CNRS-IN2P3-Université Paris-Sud, Bât. 108, F-91405 Orsay (France); Vincent, Laetitia [Centre de Sciences Nucléaires et de Sciences de la Matière, CNRS-IN2P3-Université Paris-Sud, Bât. 108, F-91405 Orsay (France); Institut d’Electronique Fondamentale, Université Paris-Sud, UMR 8622, Bât. 220, 91405 Orsay (France); Boulle, Alexandre [Science des Procédés Céramiques et de Traitements de Surface, CNRS UMR 7315, Centre Européen de la Céramique, 12 rue Atlantis, 87068 Limoges (France); Jagielski, Jacek [Institute for Electronic Materials Technology, Wolczynska 133, 01-919 Warsaw (Poland); National Center for Nuclear Research, PL-05-400 Swierk/Otwock (Poland); Pantelica, Dan [Horia Hulubei National Institute for Physics and Nuclear Engineering, P.O.B. MG-6, 077125 Magurele (Romania)

    2014-08-01

    The modifications of the microstructure of yttria-stabilized cubic zirconia and silicon carbide single crystals implanted with high concentrations of noble gas ions and subsequently annealed at high temperature were characterized using RBS/C, XRD and TEM. It is found that the annealing behavior is strongly dependent on both the material and the implanted noble gases. Ar-implanted yttria-stabilized zirconia shows no significant microstructural modification upon annealing at 800 °C, e.g. dislocations are still present and the size of the Ar bubbles does not evolve. This is in strong contrast with previous observations on helium-implanted zirconia, where the formation of bubbles and elongated fractures were observed. In the case of SiC, thermal annealing at 1000 °C shows an enhanced damage recovery when He is implanted as compared to Ar implantation and the recrystallization of the matrix is accompanied with the release of noble gas atoms. This difference can be ascribed to different atomic radii, and thus mobility of implanted species.

  12. Electrochemical properties and applications of nanocrystalline, microcrystalline, and epitaxial cubic silicon carbide films.

    Science.gov (United States)

    Zhuang, Hao; Yang, Nianjun; Zhang, Lei; Fuchs, Regina; Jiang, Xin

    2015-05-27

    Microstructures of the materials (e.g., crystallinitiy, defects, and composition, etc.) determine their properties, which eventually lead to their diverse applications. In this contribution, the properties, especially the electrochemical properties, of cubic silicon carbide (3C-SiC) films have been engineered by controlling their microstructures. By manipulating the deposition conditions, nanocrystalline, microcrystalline and epitaxial (001) 3C-SiC films are obtained with varied properties. The epitaxial 3C-SiC film presents the lowest double-layer capacitance and the highest reversibility of redox probes, because of its perfect (001) orientation and high phase purity. The highest double-layer capacitance and the lowest reversibility of redox probes have been realized on the nanocrystalline 3C-SiC film. Those are ascribed to its high amount of grain boundaries, amorphous phases and large diversity in its crystal size. Based on their diverse properties, the electrochemical performances of 3C-SiC films are evaluated in two kinds of potential applications, namely an electrochemical capacitor using a nanocrystalline film and an electrochemical dopamine sensor using the epitaxial 3C-SiC film. The nanocrystalline 3C-SiC film shows not only a high double layer capacitance (43-70 μF/cm(2)) but also a long-term stability of its capacitance. The epitaxial 3C-SiC film shows a low detection limit toward dopamine, which is one to 2 orders of magnitude lower than its normal concentration in tissue. Therefore, 3C-SiC film is a novel but designable material for different emerging electrochemical applications such as energy storage, biomedical/chemical sensors, environmental pollutant detectors, and so on.

  13. Atomic scale control and understanding of cubic silicon carbide surface reconstructions, nanostructures and nanochemistry

    Science.gov (United States)

    Soukiassian, Patrick G.; Enriquez, Hanna B.

    2004-05-01

    The atomic scale ordering and properties of cubic silicon carbide (bgr-SiC) surfaces and nanostructures are investigated by atom-resolved room and high-temperature scanning tunnelling microscopy (STM) and spectroscopy (STS), synchrotron radiation-based valence band and core level photoelectron spectroscopy (VB-PES, CL-PES) and grazing incidence x-ray diffraction (GIXRD). In this paper, we review the latest results on the atomic scale understanding of (i) the structure of bgr-SiC(100) surface reconstructions, (ii) temperature-induced metallic surface phase transition, (iii) one dimensional Si(C) self-organized nanostructures having unprecedented characteristics, and on (iv) nanochemistry at SiC surfaces with hydrogen. The organization of these surface reconstructions as well as the 1D nanostructures' self-organization are primarily driven by surface stress. In this paper, we address such important issues as (i) the structure of the Si-rich 3 × 2, the Si-terminated c (4 × 2), the C-terminated c (2 × 2) reconstructions of the bgr-SiC(100) surface, (ii) the temperature-induced reversible {\\mathrm {c}}(4\\times 2) \\Leftrightarrow 2\\times 1 metallic phase transition, (iii) the formation of highly stable (up to 900 °C) Si atomic and vacancy lines, (iv) the temperature-induced sp to sp3 diamond like surface transformation, and (v) the first example of H-induced semiconductor surface metallization on the bgr-SiC (100) 3 × 2 surface. The results are discussed and compared to other experimental and theoretical investigations.

  14. Near-infrared luminescent cubic silicon carbide nanocrystals for in vivo biomarker applications: an ab initio study.

    Science.gov (United States)

    Somogyi, Bálint; Zólyomi, Viktor; Gali, Adam

    2012-12-21

    Molecule-sized fluorescent emitters are much sought-after to probe biomolecules in living cells. We demonstrate here by time-dependent density functional calculations that the experimentally achievable 1-2 nm sized silicon carbide nanocrystals can emit light in the near-infrared region after introducing appropriate color centers in them. These near-infrared luminescent silicon carbide nanocrystals may act as ideal fluorophores for in vivo bioimaging.

  15. Growth of boron doped hydrogenated nanocrystalline cubic silicon carbide (3C-SiC) films by Hot Wire-CVD

    Energy Technology Data Exchange (ETDEWEB)

    Pawbake, Amit [School of Energy Studies, Savitribai Phule Pune University, Pune 411 007 (India); Tata Institute of Fundamental Research, Colaba, Mumbai 400 005 (India); Mayabadi, Azam; Waykar, Ravindra; Kulkarni, Rupali; Jadhavar, Ashok [School of Energy Studies, Savitribai Phule Pune University, Pune 411 007 (India); Waman, Vaishali [Modern College of Arts, Science and Commerce, Shivajinagar, Pune 411 005 (India); Parmar, Jayesh [Tata Institute of Fundamental Research, Colaba, Mumbai 400 005 (India); Bhattacharyya, Somnath [Department of Metallurgical and Materials Engineering, IIT Madras, Chennai 600 036 (India); Ma, Yuan‐Ron [Department of Physics, National Dong Hwa University, Hualien 97401, Taiwan (China); Devan, Rupesh; Pathan, Habib [Department of Physics, Savitribai Phule Pune University, Pune 411007 (India); Jadkar, Sandesh, E-mail: sandesh@physics.unipune.ac.in [Department of Physics, Savitribai Phule Pune University, Pune 411007 (India)

    2016-04-15

    Highlights: • Boron doped nc-3C-SiC films prepared by HW-CVD using SiH{sub 4}/CH{sub 4}/B{sub 2}H{sub 6}. • 3C-Si-C films have preferred orientation in (1 1 1) direction. • Introduction of boron into SiC matrix retard the crystallanity in the film structure. • Film large number of SiC nanocrystallites embedded in the a-Si matrix. • Band gap values, E{sub Tauc} and E{sub 04} (E{sub 04} > E{sub Tauc}) decreases with increase in B{sub 2}H{sub 6} flow rate. - Abstract: Boron doped nanocrystalline cubic silicon carbide (3C-SiC) films have been prepared by HW-CVD using silane (SiH{sub 4})/methane (CH{sub 4})/diborane (B{sub 2}H{sub 6}) gas mixture. The influence of boron doping on structural, optical, morphological and electrical properties have been investigated. The formation of 3C-SiC films have been confirmed by low angle XRD, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), Fourier transform infra-red (FTIR) spectroscopy and high resolution-transmission electron microscopy (HR-TEM) analysis whereas effective boron doping in nc-3C-SiC have been confirmed by conductivity, charge carrier activation energy, and Hall measurements. Raman spectroscopy and HR-TEM analysis revealed that introduction of boron into the SiC matrix retards the crystallanity in the film structure. The field emission scanning electron microscopy (FE-SEM) and non contact atomic force microscopy (NC-AFM) results signify that 3C-SiC film contain well resolved, large number of silicon carbide (SiC) nanocrystallites embedded in the a-Si matrix having rms surface roughness ∼1.64 nm. Hydrogen content in doped films are found smaller than that of un-doped films. Optical band gap values, E{sub Tauc} and E{sub 04} decreases with increase in B{sub 2}H{sub 6} flow rate.

  16. SILICON CARBIDE FOR SEMICONDUCTORS

    Science.gov (United States)

    This state-of-the-art survey on silicon carbide for semiconductors includes a bibliography of the most important references published as of the end...of 1964. The various methods used for growing silicon carbide single crystals are reviewed, as well as their properties and devices fabricated from...them. The fact that the state of-the-art of silicon carbide semiconductors is not further advanced may be attributed to the difficulties of growing

  17. Silicon Carbide Shapes.

    Science.gov (United States)

    Free-standing silicon carbide shapes are produced by passing a properly diluted stream of a reactant gas, for example methyltrichlorosilane, into a...reaction chamber housing a thin walled, hollow graphite body heated to 1300-1500C. After the graphite body is sufficiently coated with silicon carbide , the...graphite body is fired, converting the graphite to gaseous CO2 and CO and leaving a silicon carbide shaped article remaining.

  18. SILICON CARBIDE DATA SHEETS

    Science.gov (United States)

    These data sheets present a compilation of a wide range of electrical, optical and energy values for alpha and beta- silicon carbide in bulk and film...spectrum. Energy data include energy bands, energy gap and energy levels for variously-doped silicon carbide , as well as effective mass tables, work

  19. Cubic silicon carbide and boron nitride as possible primary pressure calibrants for high pressure and temperature scale

    Science.gov (United States)

    Zhuravlev, K. K.; Goncharov, A. F.; Tkachev, S. N.; Prakapenka, V.

    2010-12-01

    K. K. Zhuravlev, A. F. Goncharov Geophysical Laboratory, Carnegie Institution of Washington, 5251 Broad Branch Road NW, Washington DC, 20015 V. Prakapenka, S. N. Tkachev CARS, the University of Chicago, Bldg. 434A, Argonne National Laboratory, 9700 S. Cass. Ave., Argonne, IL 60439 Abstract Since its introduction, ruby-based pressure scale (Mao et al., 1986) has been the most commonly used by the high-pressure scientific community. However, it has limited use at elevated temperatures, due to the weakening and broadening of the ruby fluorescence line. The recent developments in the field of high temperature, high pressure physics and geophysics require some alternative pressure scale, which will be capable of measuring pressures at temperatures up to 3000 K. Cubic boron nitride (cBN) was recently (Goncharov et al., 2005) proposed as the possible pressure calibrant. It has been suggested that the simultaneous use of x-ray diffraction to measure density and Brillouin spectroscopy to obtain elastic properties of the crystal can be used to construct the pressure scale independent of any other pressure standards, i.e. cBN can be a primary pressure calibrant. However, the acoustic velocities of cBN are very close to those of diamond and, therefore, are hard to resolve in experiment at high pressures in diamond-anvil cell. Another possible primary pressure calibrant is cubic silicon carbide (SiC-3C). Its density and elastic parameters are quite different from the diamond ones and it is stable over the broad range of temperatures and pressures (up to 1 Mbar). SiC-3C is transparent and allows the use of Brillouin spectroscopy. Additionally, SiC-3C has two strong Raman lines, which can be used for the optical in situ pressure measurements. We report our experimental data on both cBN and SiC-3C and show that they, indeed, can be used in constructing reliable and accurate high-pressure, high-temperature scale. We performed single crystal x-ray diffraction and Brillouin

  20. Chemical Analysis Methods for Silicon Carbide

    Institute of Scientific and Technical Information of China (English)

    Shen Keyin

    2006-01-01

    @@ 1 General and Scope This Standard specifies the determination method of silicon dioxide, free silicon, free carbon, total carbon, silicon carbide, ferric sesquioxide in silicon carbide abrasive material.

  1. Silicon carbide reinforced silicon carbide composite

    Science.gov (United States)

    Lau, Sai-Kwing (Inventor); Calandra, Salvatore J. (Inventor); Ohnsorg, Roger W. (Inventor)

    2001-01-01

    This invention relates to a process comprising the steps of: a) providing a fiber preform comprising a non-oxide ceramic fiber with at least one coating, the coating comprising a coating element selected from the group consisting of carbon, nitrogen, aluminum and titanium, and the fiber having a degradation temperature of between 1400.degree. C. and 1450.degree. C., b) impregnating the preform with a slurry comprising silicon carbide particles and between 0.1 wt % and 3 wt % added carbon c) providing a cover mix comprising: i) an alloy comprising a metallic infiltrant and the coating element, and ii) a resin, d) placing the cover mix on at least a portion of the surface of the porous silicon carbide body, e) heating the cover mix to a temperature between 1410.degree. C. and 1450.degree. C. to melt the alloy, and f) infiltrating the fiber preform with the melted alloy for a time period of between 15 minutes and 240 minutes, to produce a ceramic fiber reinforced ceramic composite.

  2. Characterization of Silicon Carbide.

    Science.gov (United States)

    The various electrical and structural measurement techniques for silicon carbide are described. The electrical measurements include conductivity, resistivity, carrier concentration, mobility, doping energy levels, and lifetime. The structural measurements include polytype determination and crystalline perfection. Both bulk and epitaxial films are included.

  3. Composition Comprising Silicon Carbide

    Science.gov (United States)

    Mehregany, Mehran (Inventor); Zorman, Christian A. (Inventor); Fu, Xiao-An (Inventor); Dunning, Jeremy L. (Inventor)

    2012-01-01

    A method of depositing a ceramic film, particularly a silicon carbide film, on a substrate is disclosed in which the residual stress, residual stress gradient, and resistivity are controlled. Also disclosed are substrates having a deposited film with these controlled properties and devices, particularly MEMS and NEMS devices, having substrates with films having these properties.

  4. Silicon carbide sewing thread

    Science.gov (United States)

    Sawko, Paul M. (Inventor)

    1995-01-01

    Composite flexible multilayer insulation systems (MLI) were evaluated for thermal performance and compared with currently used fibrous silica (baseline) insulation system. The systems described are multilayer insulations consisting of alternating layers of metal foil and scrim ceramic cloth or vacuum metallized polymeric films quilted together using ceramic thread. A silicon carbide thread for use in the quilting and the method of making it are also described. These systems provide lightweight thermal insulation for a variety of uses, particularly on the surface of aerospace vehicles subject to very high temperatures during flight.

  5. Studies of silicon carbide and silicon carbide nitride thin films

    Science.gov (United States)

    Alizadeh, Zhila

    Silicon carbide semiconductor technology is continuing to advance rapidly. The excellent physical and electronic properties of silicon carbide recently take itself to be the main focused power device material for high temperature, high power, and high frequency electronic devices because of its large band gap, high thermal conductivity, and high electron saturation drift velocity. SiC is more stable than Si because of its high melting point and mechanical strength. Also the understanding of the structure and properties of semiconducting thin film alloys is one of the fundamental steps toward their successful application in technologies requiring materials with tunable energy gaps, such as solar cells, flat panel displays, optical memories and anti-reflecting coatings. Silicon carbide and silicon nitrides are promising materials for novel semiconductor applications because of their band gaps. In addition, they are "hard" materials in the sense of having high elastic constants and large cohesive energies and are generally resistant to harsh environment, including radiation. In this research, thin films of silicon carbide and silicon carbide nitride were deposited in a r.f magnetron sputtering system using a SiC target. A detailed analysis of the surface chemistry of the deposited films was performed using x-ray photoelectron spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR) and Raman spectroscopy whereas structure and morphology was studied atomic force microscopy (AFM), and nonoindentation.

  6. Palladium interaction with silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Gentile, M., E-mail: Marialuisa.Gentile@manchester.ac.uk [Centre for Nuclear Energy Technology (C-NET), School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, Manchester M13 9PL (United Kingdom); Xiao, P. [Materials Science Centre, School of Materials, The University of Manchester, Manchester M13 9PL (United Kingdom); Abram, T. [Centre for Nuclear Energy Technology (C-NET), School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, Manchester M13 9PL (United Kingdom)

    2015-07-15

    In this work the palladium interaction with silicon carbide is investigated by means of complementary analytical techniques such as thermogravimetry (TG), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Thermoscans were carried out on pellets of palladium, α-SiC and β-SiC high purity powders in the temperature range comprised between 293 K and 1773 K, in order to study the effect of temperature on the palladium-silicon carbide reaction. Thermoscans of α-SiC pellets containing 5 at.%Pd show that during differential calorimetry scans three exothermic peaks occurred at 773 K, 1144 K and 1615 K, while thermoscans of β-SiC pellets containing 3 at.%Pd and 5 at.%Pd do not show peaks. For the pellet α-SiC–5 at.%Pd XRD spectra reveal that the first peak is associated with the formation of Pd{sub 3}Si and SiO{sub 2} phases, while the second peak and the third peak are correlated with the formation of Pd{sub 2}Si phase and the active oxidation of silicon carbide respectively. Thermogravimetry scans show weight gain and weight loss peaks due to the SiO{sub 2} phase formation and the active oxidation. Additionally XPS fittings reveal the development of SiC{sub x}O{sub y} phase during the first exothermic peak up to the temperature of 873 K. The experimental data reveals that alpha silicon carbide is attacked by palladium at lower temperatures than beta silicon carbide and the reaction mechanism between silicon carbide and palladium is strongly affected by silicon carbide oxidation.

  7. Palladium interaction with silicon carbide

    Science.gov (United States)

    Gentile, M.; Xiao, P.; Abram, T.

    2015-07-01

    In this work the palladium interaction with silicon carbide is investigated by means of complementary analytical techniques such as thermogravimetry (TG), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Thermoscans were carried out on pellets of palladium, α-SiC and β-SiC high purity powders in the temperature range comprised between 293 K and 1773 K, in order to study the effect of temperature on the palladium-silicon carbide reaction. Thermoscans of α-SiC pellets containing 5 at.%Pd show that during differential calorimetry scans three exothermic peaks occurred at 773 K, 1144 K and 1615 K, while thermoscans of β-SiC pellets containing 3 at.%Pd and 5 at.%Pd do not show peaks. For the pellet α-SiC-5 at.%Pd XRD spectra reveal that the first peak is associated with the formation of Pd3Si and SiO2 phases, while the second peak and the third peak are correlated with the formation of Pd2Si phase and the active oxidation of silicon carbide respectively. Thermogravimetry scans show weight gain and weight loss peaks due to the SiO2 phase formation and the active oxidation. Additionally XPS fittings reveal the development of SiCxOy phase during the first exothermic peak up to the temperature of 873 K. The experimental data reveals that alpha silicon carbide is attacked by palladium at lower temperatures than beta silicon carbide and the reaction mechanism between silicon carbide and palladium is strongly affected by silicon carbide oxidation.

  8. Silicon carbide fibers and articles including same

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, John E; Griffith, George W

    2015-01-27

    Methods of producing silicon carbide fibers. The method comprises reacting a continuous carbon fiber material and a silicon-containing gas in a reaction chamber at a temperature ranging from approximately 1500.degree. C. to approximately 2000.degree. C. A partial pressure of oxygen in the reaction chamber is maintained at less than approximately 1.01.times.10.sup.2 Pascal to produce continuous alpha silicon carbide fibers. Continuous alpha silicon carbide fibers and articles formed from the continuous alpha silicon carbide fibers are also disclosed.

  9. Methods for producing silicon carbide fibers

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, John E.; Griffith, George W.

    2016-03-01

    Methods of producing silicon carbide fibers. The method comprises reacting a continuous carbon fiber material and a silicon-containing gas in a reaction chamber at a temperature ranging from approximately 1500.degree. C. to approximately 2000.degree. C. A partial pressure of oxygen in the reaction chamber is maintained at less than approximately 1.01.times.10.sup.2 Pascal to produce continuous alpha silicon carbide fibers. Continuous alpha silicon carbide fibers and articles formed from the continuous alpha silicon carbide fibers are also disclosed.

  10. Thermo-Mechanical Characterization of Silicon Carbide-Silicon Carbide Composites at Elevated Temperatures Using a Unique Combustion Facility

    Science.gov (United States)

    2009-09-10

    F THERMO-MECHANICAL CHARACTERIZATION OF SILICON CARBIDE - SILICON CARBIDE COMPOSITES AT ELEVATED...MECHANICAL CTERIZATION OF SILICON CARBIDE -SILIC BIDE COMPOSITES AT LEVATED TEMPER S USING A UNIQUE COMBUSTION FACILITY DISSERTATI N Ted T. Kim...THERMO-MECHANICAL CHARACTERIZATION OF SILICON CARBIDE - SILICON CARBIDE COMPOSITES AT ELEVATED TEMPERATURES USING A UNIQUE COMBUSTION FACILITY

  11. Transparent polycrystalline cubic silicon nitride

    Science.gov (United States)

    Nishiyama, Norimasa; Ishikawa, Ryo; Ohfuji, Hiroaki; Marquardt, Hauke; Kurnosov, Alexander; Taniguchi, Takashi; Kim, Byung-Nam; Yoshida, Hidehiro; Masuno, Atsunobu; Bednarcik, Jozef; Kulik, Eleonora; Ikuhara, Yuichi; Wakai, Fumihiro; Irifune, Tetsuo

    2017-01-01

    Glasses and single crystals have traditionally been used as optical windows. Recently, there has been a high demand for harder and tougher optical windows that are able to endure severe conditions. Transparent polycrystalline ceramics can fulfill this demand because of their superior mechanical properties. It is known that polycrystalline ceramics with a spinel structure in compositions of MgAl2O4 and aluminum oxynitride (γ-AlON) show high optical transparency. Here we report the synthesis of the hardest transparent spinel ceramic, i.e. polycrystalline cubic silicon nitride (c-Si3N4). This material shows an intrinsic optical transparency over a wide range of wavelengths below its band-gap energy (258 nm) and is categorized as one of the third hardest materials next to diamond and cubic boron nitride (cBN). Since the high temperature metastability of c-Si3N4 in air is superior to those of diamond and cBN, the transparent c-Si3N4 ceramic can potentially be used as a window under extremely severe conditions. PMID:28303948

  12. Hydroxide catalysis bonding of silicon carbide

    NARCIS (Netherlands)

    Veggel, A.A. van; Ende, D.A. van den; Bogenstahl, J.; Rowan, S.; Cunningham, W.; Gubbels, G.H.M.; Nijmeijer, H.

    2008-01-01

    For bonding silicon carbide optics, which require extreme stability, hydroxide catalysis bonding is considered [Rowan, S., Hough, J. and Elliffe, E., Silicon carbide bonding. UK Patent 040 7953.9, 2004. Please contact Mr. D. Whiteford for further information: D.Whiteford@admin.gla.ac.uk]. This techn

  13. Process for making silicon carbide reinforced silicon carbide composite

    Science.gov (United States)

    Lau, Sai-Kwing (Inventor); Calandra, Salavatore J. (Inventor); Ohnsorg, Roger W. (Inventor)

    1998-01-01

    A process comprising the steps of: a) providing a fiber preform comprising a non-oxide ceramic fiber with at least one coating, the coating comprising a coating element selected from the group consisting of carbon, nitrogen, aluminum and titanium, and the fiber having a degradation temperature of between 1400.degree. C. and 1450.degree. C., b) impregnating the preform with a slurry comprising silicon carbide particles and between 0.1 wt % and 3 wt % added carbon c) providing a cover mix comprising: i) an alloy comprising a metallic infiltrant and the coating element, and ii) a resin, d) placing the cover mix on at least a portion of the surface of the porous silicon carbide body, e) heating the cover mix to a temperature between 1410.degree. C. and 1450.degree. C. to melt the alloy, and f) infiltrating the fiber preform with the melted alloy for a time period of between 15 minutes and 240 minutes, to produce a ceramic fiber reinforced ceramic composite.

  14. Neutron irradiation induced amorphization of silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Snead, L.L.; Hay, J.C. [Oak Ridge National Lab., TN (United States)

    1998-09-01

    This paper provides the first known observation of silicon carbide fully amorphized under neutron irradiation. Both high purity single crystal hcp and high purity, highly faulted (cubic) chemically vapor deposited (CVD) SiC were irradiated at approximately 60 C to a total fast neutron fluence of 2.6 {times} 10{sup 25} n/m{sup 2}. Amorphization was seen in both materials, as evidenced by TEM, electron diffraction, and x-ray diffraction techniques. Physical properties for the amorphized single crystal material are reported including large changes in density ({minus}10.8%), elastic modulus as measured using a nanoindentation technique ({minus}45%), hardness as measured by nanoindentation ({minus}45%), and standard Vickers hardness ({minus}24%). Similar property changes are observed for the critical temperature for amorphization at this neutron dose and flux, above which amorphization is not possible, is estimated to be greater than 130 C.

  15. Carbothermal synthesis of silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Janney, M.A.; Wei, G.C.; Kennedy, C.R.; Harris, L.A.

    1985-05-01

    Silicon carbide powders were synthesized from various silica and carbon sources by a carbothermal reduction process at temperatures between 1500 and 1600/sup 0/C. The silica sources were fumed silica, methyltrimethoxysilane, and microcrystalline quartz. The carbon sources were petroleum pitch, phenolic resin, sucrose, and carbon black. Submicron SiC powders were synthesized. Their morphologies included equiaxed loosely-bound agglomerates, equiaxed hard-shell agglomerates, and whiskers. Morphology changed with the furnace atmosphere (argon, nitrogen, or nitrogen-4% hydrogen). The best sintering was observed in SiC derived from the fumed-silica-pitch and fumed-silica-sucrose precursors. The poorest sintering was observed in SiC derived from microcrystalline quartz and carbon black. 11 refs., 16 figs., 10 tabs.

  16. Catastrophic degradation of the interface of epitaxial silicon carbide on silicon at high temperatures

    Science.gov (United States)

    Pradeepkumar, Aiswarya; Mishra, Neeraj; Kermany, Atieh Ranjbar; Boeckl, John J.; Hellerstedt, Jack; Fuhrer, Michael S.; Iacopi, Francesca

    2016-07-01

    Epitaxial cubic silicon carbide on silicon is of high potential technological relevance for the integration of a wide range of applications and materials with silicon technologies, such as micro electro mechanical systems, wide-bandgap electronics, and graphene. The hetero-epitaxial system engenders mechanical stresses at least up to a GPa, pressures making it extremely challenging to maintain the integrity of the silicon carbide/silicon interface. In this work, we investigate the stability of said interface and we find that high temperature annealing leads to a loss of integrity. High-resolution transmission electron microscopy analysis shows a morphologically degraded SiC/Si interface, while mechanical stress measurements indicate considerable relaxation of the interfacial stress. From an electrical point of view, the diode behaviour of the initial p-Si/n-SiC junction is catastrophically lost due to considerable inter-diffusion of atoms and charges across the interface upon annealing. Temperature dependent transport measurements confirm a severe electrical shorting of the epitaxial silicon carbide to the underlying substrate, indicating vast predominance of the silicon carriers in lateral transport above 25 K. This finding has crucial consequences on the integration of epitaxial silicon carbide on silicon and its potential applications.

  17. Characterization of silicon-silicon carbide ceramic derived from carbon-carbon silicon carbide composites

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Vijay K. [Indian Institute of Technology, Varanasi (India). Dept. of Mechanical Engineering; Krenkel, Walter [Univ. of Bayreuth (Germany). Dept. of Ceramic Materials Engineering

    2013-04-15

    The main objective of the present work is to process porous silicon - silicon carbide (Si - SiC) ceramic by the oxidation of carboncarbon silicon carbide (C/C - SiC) composites. Phase studies are performed on the oxidized porous composite to examine the changes due to the high temperature oxidation. Further, various characterization techniques are performed on Si- SiC ceramics in order to study the material's microstructure. The effects of various parameters such as fiber alignment (twill weave and short/chopped fiber) and phenolic resin type (resol and novolak) are characterized.

  18. Selective etching of silicon carbide films

    Science.gov (United States)

    Gao, Di; Howe, Roger T.; Maboudian, Roya

    2006-12-19

    A method of etching silicon carbide using a nonmetallic mask layer. The method includes providing a silicon carbide substrate; forming a non-metallic mask layer by applying a layer of material on the substrate; patterning the mask layer to expose underlying areas of the substrate; and etching the underlying areas of the substrate with a plasma at a first rate, while etching the mask layer at a rate lower than the first rate.

  19. Stabilization of boron carbide via silicon doping.

    Science.gov (United States)

    Proctor, J E; Bhakhri, V; Hao, R; Prior, T J; Scheler, T; Gregoryanz, E; Chhowalla, M; Giulani, F

    2015-01-14

    Boron carbide is one of the lightest and hardest ceramics, but its applications are limited by its poor stability against a partial phase separation into separate boron and carbon. Phase separation is observed under high non-hydrostatic stress (both static and dynamic), resulting in amorphization. The phase separation is thought to occur in just one of the many naturally occurring polytypes in the material, and this raises the possibility of doping the boron carbide to eliminate this polytype. In this work, we have synthesized boron carbide doped with silicon. We have conducted a series of characterizations (transmission electron microscopy, scanning electron microscopy, Raman spectroscopy and x-ray diffraction) on pure and silicon-doped boron carbide following static compression to 50 GPa non-hydrostatic pressure. We find that the level of amorphization under static non-hydrostatic pressure is drastically reduced by the silicon doping.

  20. Silicon Carbide Solar Cells Investigated

    Science.gov (United States)

    Bailey, Sheila G.; Raffaelle, Ryne P.

    2001-01-01

    The semiconductor silicon carbide (SiC) has long been known for its outstanding resistance to harsh environments (e.g., thermal stability, radiation resistance, and dielectric strength). However, the ability to produce device-quality material is severely limited by the inherent crystalline defects associated with this material and their associated electronic effects. Much progress has been made recently in the understanding and control of these defects and in the improved processing of this material. Because of this work, it may be possible to produce SiC-based solar cells for environments with high temperatures, light intensities, and radiation, such as those experienced by solar probes. Electronics and sensors based on SiC can operate in hostile environments where conventional silicon-based electronics (limited to 350 C) cannot function. Development of this material will enable large performance enhancements and size reductions for a wide variety of systems--such as high-frequency devices, high-power devices, microwave switching devices, and high-temperature electronics. These applications would supply more energy-efficient public electric power distribution and electric vehicles, more powerful microwave electronics for radar and communications, and better sensors and controls for cleaner-burning, more fuel-efficient jet aircraft and automobile engines. The 6H-SiC polytype is a promising wide-bandgap (Eg = 3.0 eV) semiconductor for photovoltaic applications in harsh solar environments that involve high-temperature and high-radiation conditions. The advantages of this material for this application lie in its extremely large breakdown field strength, high thermal conductivity, good electron saturation drift velocity, and stable electrical performance at temperatures as high as 600 C. This behavior makes it an attractive photovoltaic solar cell material for devices that can operate within three solar radii of the Sun.

  1. Diamond-silicon carbide composite and method

    Science.gov (United States)

    Zhao, Yusheng

    2011-06-14

    Uniformly dense, diamond-silicon carbide composites having high hardness, high fracture toughness, and high thermal stability are prepared by consolidating a powder mixture of diamond and amorphous silicon. A composite made at 5 GPa/1673K had a measured fracture toughness of 12 MPam.sup.1/2. By contrast, liquid infiltration of silicon into diamond powder at 5 GPa/1673K produces a composite with higher hardness but lower fracture toughness.

  2. Silicon carbide sintered body manufactured from silicon carbide powder containing boron, silicon and carbonaceous additive

    Science.gov (United States)

    Tanaka, Hidehiko

    1987-01-01

    A silicon carbide powder of a 5-micron grain size is mixed with 0.15 to 0.60 wt% mixture of a boron compound, i.e., boric acid, boron carbide (B4C), silicon boride (SiB4 or SiB6), aluminum boride, etc., and an aluminum compound, i.e., aluminum, aluminum oxide, aluminum hydroxide, aluminum carbide, etc., or aluminum boride (AlB2) alone, in such a proportion that the boron/aluminum atomic ratio in the sintered body becomes 0.05 to 0.25 wt% and 0.05 to 0.40 wt%, respectively, together with a carbonaceous additive to supply enough carbon to convert oxygen accompanying raw materials and additives into carbon monoxide.

  3. Chemical Modification Methods of Nanoparticles of Silicon Carbide Surface

    OpenAIRE

    Anton S. Yegorov; Vitaly S. Ivanov; Alexey V. Antipov; Alyona I. Wozniak; Kseniia V. Tcarkova.

    2015-01-01

    silicon carbide exhibits exceptional properties: high durability, high thermal conductivity, good heat resistance, low thermal expansion factor and chemical inactivity. Reinforcement with silicon carbide nanoparticles increases polymer’s tensile strength and thermal stability.Chemical methods of modification of the silicon carbide surface by means of variety of reagents from ordinary molecules to macromolecular polymers are reviewed in the review.The structure of silicon carbide surface layer...

  4. Superconductivity in heavily boron-doped silicon carbide

    Directory of Open Access Journals (Sweden)

    Markus Kriener, Takahiro Muranaka, Junya Kato, Zhi-An Ren, Jun Akimitsu and Yoshiteru Maeno

    2008-01-01

    Full Text Available The discoveries of superconductivity in heavily boron-doped diamond in 2004 and silicon in 2006 have renewed the interest in the superconducting state of semiconductors. Charge-carrier doping of wide-gap semiconductors leads to a metallic phase from which upon further doping superconductivity can emerge. Recently, we discovered superconductivity in a closely related system: heavily boron-doped silicon carbide. The sample used for that study consisted of cubic and hexagonal SiC phase fractions and hence this led to the question which of them participated in the superconductivity. Here we studied a hexagonal SiC sample, free from cubic SiC phase by means of x-ray diffraction, resistivity, and ac susceptibility.

  5. Bioactivation of biomorphous silicon carbide bone implants.

    Science.gov (United States)

    Will, Julia; Hoppe, Alexander; Müller, Frank A; Raya, Carmen T; Fernández, Julián M; Greil, Peter

    2010-12-01

    Wood-derived silicon carbide (SiC) offers a specific biomorphous microstructure similar to the cellular pore microstructure of bone. Compared with bioactive ceramics such as calcium phosphate, however, silicon carbide is considered not to induce spontaneous interface bonding to living bone. Bioactivation by chemical treatment of biomorphous silicon carbide was investigated in order to accelerate osseointegration and improve bone bonding ability. Biomorphous SiC was processed from sipo (Entrandrophragma utile) wood by heating in an inert atmosphere and infiltrating the resulting carbon replica with liquid silicon melt at 1450°C. After removing excess silicon by leaching in HF/HNO₃ the biomorphous preform consisted of β-SiC with a small amount (approximately 6wt.%) of unreacted carbon. The preform was again leached in HCl/HNO₃ and finally exposed to CaCl₂ solution. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared analyses proved that oxidation of the residual carbon at the surface induced formation of carboxyl [COO⁻] groups, which triggered adsorption of Ca(2+), as confirmed by XPS and inductively coupled plasma optical emission spectroscopy measurements. A local increase in Ca(2+) concentration stimulated in vitro precipitation of Ca₅(PO₄)₃OH (HAP) on the silicon carbide preform surface during exposure to simulated body fluid, which indicates a significantly increased bone bonding activity compared with SiC.

  6. Mechanical Properties of Crystalline Silicon Carbide Nanowires.

    Science.gov (United States)

    Zhang, Huan; Ding, Weiqiang; Aidun, Daryush K

    2015-02-01

    In this paper, the mechanical properties of crystalline silicon carbide nanowires, synthesized with a catalyst-free chemical vapor deposition method, were characterized with nanoscale tensile testing and mechanical resonance testing methods inside a scanning electron microscope. Tensile testing of individual silicon carbide nanowire was performed to determine the tensile properties of the material including the tensile strength, failure strain and Young's modulus. The silicon carbide nanowires were also excited to mechanical resonance in the scanning electron microscope vacuum chamber using mechanical excitation and electrical excitation methods, and the corresponding resonance frequencies were used to determine the Young's modulus of the material according to the simple beam theory. The Young's modulus values from tensile tests were in good agreement with the ones obtained from the mechanical resonance tests.

  7. Silicon carbide, an emerging high temperature semiconductor

    Science.gov (United States)

    Matus, Lawrence G.; Powell, J. Anthony

    1991-01-01

    In recent years, the aerospace propulsion and space power communities have expressed a growing need for electronic devices that are capable of sustained high temperature operation. Applications for high temperature electronic devices include development instrumentation within engines, engine control, and condition monitoring systems, and power conditioning and control systems for space platforms and satellites. Other earth-based applications include deep-well drilling instrumentation, nuclear reactor instrumentation and control, and automotive sensors. To meet the needs of these applications, the High Temperature Electronics Program at the Lewis Research Center is developing silicon carbide (SiC) as a high temperature semiconductor material. Research is focussed on developing the crystal growth, characterization, and device fabrication technologies necessary to produce a family of silicon carbide electronic devices and integrated sensors. The progress made in developing silicon carbide is presented, and the challenges that lie ahead are discussed.

  8. Recent trends in silicon carbide device research

    Directory of Open Access Journals (Sweden)

    Munish Vashishath

    2008-08-01

    Full Text Available Silicon carbide (SiC has revolutionised semiconductor power device performance. It is a wide band gap semiconductor with an energy gap wider than 2eV and possesses extremely high power, high voltage switching characteristics and high thermal, chemical and mechanical stability. The SiC wafers are available in 6H, 4H, 2H and 3C polytypes. Because of its wide band gap, the leakage current of SiC is many orders of magnitude lower than that of silicon. Also, forward resistance of SiC power devices is approximately 200 times lower than that of conventional silicon devices. The breakdown voltage of SiC is 8-10 times higher than that of silicon. In this paper, silicon carbide Schottky barrier diodes, power MOSFETs, UMOSFET, lateral power MOSFET, SIT (static induction transistor, and nonvolatile memories are discussed along with their characteristics and applications.

  9. New process of silicon carbide purification intended for silicon passivation

    Science.gov (United States)

    Barbouche, M.; Zaghouani, R. Benabderrahmane; Benammar, N. E.; Aglieri, V.; Mosca, M.; Macaluso, R.; Khirouni, K.; Ezzaouia, H.

    2017-01-01

    In this work, we report on a new, efficient and low cost process of silicon carbide (SiC) powder purification intended to be used in photovoltaic applications. This process consists on the preparation of porous silicon carbide layers followed by a photo-thermal annealing under oxygen atmosphere and chemical treatment. The effect of etching time on impurities removal efficiency was studied. Inductively coupled plasma atomic emission spectrometry (ICP-AES) results showed that the best result was achieved for an etching time of 10 min followed by gettering at 900 °C during 1 h. SiC purity is improved from 3N (99.9771%) to 4N (99.9946%). Silicon carbide thin films were deposited onto silicon substrates by pulsed laser deposition technique (PLD) using purified SiC powder as target. Significant improvement of the minority carrier lifetime was obtained encouraging the use of SiC as a passivation layer for silicon.

  10. Silicon carbide microsystems for harsh environments

    CERN Document Server

    Wijesundara, Muthu B J

    2011-01-01

    Silicon Carbide Microsystems for Harsh Environments reviews state-of-the-art Silicon Carbide (SiC) technologies that, when combined, create microsystems capable of surviving in harsh environments, technological readiness of the system components, key issues when integrating these components into systems, and other hurdles in harsh environment operation. The authors use the SiC technology platform suite the model platform for developing harsh environment microsystems and then detail the current status of the specific individual technologies (electronics, MEMS, packaging). Additionally, methods

  11. Synthesis of silicon carbide nanocrystals from waste polytetrafluoroethylene.

    Science.gov (United States)

    Wang, Liangbiao; Cheng, Qinglin; Qin, Hengfei; Li, Zhongchun; Lou, Zhengsong; Lu, Juanjuan; Zhang, Junhao; Zhou, Quanfa

    2017-02-28

    Resource utilization of waste plastic could solve the problem of environmental pollution and simultaneously relieve energy shortages, achieving sustainable development. In this study, the conversion of waste polytetrafluoroethylene (PTFE) to cubic silicon carbide (SiC) nanoparticles has been described. The structures and morphologies of the obtained SiC were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Furthermore, the FTIR spectrum of the obtained SiC sample suggests that the waste PTFE was completely converted into SiC in our approach.

  12. Method of preparing a porous silicon carbide

    NARCIS (Netherlands)

    Moene, R.; Tazelaar, F.W.; Makkee, M.; Moulijn, J.A.

    1994-01-01

    Abstract of NL 9300816 (A) Described is a method of preparing a porous silicon carbide suitable for use as a catalyst or as a catalyst support. Porous carbon is provided with a catalyst which is suitable for catalysing gasification of carbon with hydrogen, and with a catalyst suitable for cataly

  13. Casimir force measurements from silicon carbide surfaces

    NARCIS (Netherlands)

    Sedighi, M.; Svetovoy, V. B.; Palasantzas, G.

    2016-01-01

    Using an atomic force microscope we performed measurements of the Casimir force between a gold-coated (Au) microsphere and doped silicon carbide (SiC) samples. The last of these is a promising material for devices operating under severe environments. The roughness of the interacting surfaces was mea

  14. Method of preparing a porous silicon carbide

    NARCIS (Netherlands)

    Moene, R.; Tazelaar, F.W.; Makkee, M.; Moulijn, J.A.

    1994-01-01

    Abstract of NL 9300816 (A) Described is a method of preparing a porous silicon carbide suitable for use as a catalyst or as a catalyst support. Porous carbon is provided with a catalyst which is suitable for catalysing gasification of carbon with hydrogen, and with a catalyst suitable for cataly

  15. Silicon Carbide Technologies for Lightweighted Aerospace Mirrors

    Science.gov (United States)

    2008-09-01

    silicon carbide (SiC) based materials. It is anticipated that SiC can be utilized for most applications from cryogenic to high temperatures. This talk will focus on describing the SOA for these (near term) SiC technology solutions for making mirror structural substrates, figuring and finishing technologies being investigated to reduce cost time

  16. Casimir forces from conductive silicon carbide surfaces

    NARCIS (Netherlands)

    Sedighi Ghozotkhar, Mehdi; Svetovoy, V. B.; Broer, W. H.; Palasantzas, G.

    2014-01-01

    Samples of conductive silicon carbide (SiC), which is a promising material due to its excellent properties for devices operating in severe environments, were characterized with the atomic force microscope for roughness, and the optical properties were measured with ellipsometry in a wide range of fr

  17. Method of preparing a porous silicon carbide

    NARCIS (Netherlands)

    Moene, R.; Tazelaar, F.W.; Makkee, M.; Moulijn, J.A.

    1994-01-01

    Abstract of NL 9300816 (A) Described is a method of preparing a porous silicon carbide suitable for use as a catalyst or as a catalyst support. Porous carbon is provided with a catalyst which is suitable for catalysing gasification of carbon with hydrogen, and with a catalyst suitable for

  18. Growth kinetics of cubic carbide free layers in graded cemented carbides

    Science.gov (United States)

    Shi, Liu-Yong; Liu, Yi-Min; Huang, Ji-Hua; Zhang, Shou-Quan; Zhao, Xing-Ke

    2012-01-01

    In order to reveal the formation mechanism of cubic carbide free layers (CCFL), graded cemented carbides with CCFL in the surface zone were fabricated by a one-step sintering procedure in vacuum, and the analysis on microstructure and element distribution were performed by scanning electron microscopy (SEM) and electron probe micro-analyzer (EPMA), respectively. A new physical model and kinetic equation were established based on experimental results. Being different from previous models, this model suggests that nitrogen diffusion outward is only considered as an induction factor, and the diffusion of titanium through liquid phase plays a dominative role. The driving force of diffusion is expressed as the differential value between nitrogen partial pressure and nitrogen equilibrium pressure essentially. Simulation results by the kinetic equation are in good agreement with experimental values, and the effect of process parameters on the growth kinetics of CCFL can also be explained reasonably by the current model.

  19. Kinetics and Mechanisms of Creep in Sintered Alpha Silicon Carbide and Niobium Carbide.

    Science.gov (United States)

    1985-09-18

    CARBIDE AND NIOBIUM CARBIDE Supported by 30 F (DMR-812-0804) and ARO (MIPR’s 43-48, 127-83, 141-84) U August, 1985 NCSU .LET tow A CL School of Engineering...SILICON CARBIDE AND NIOBIUM CARBIDE Supported by NSF (DMR-812-0804) and ARO (MIPR’s 43-48, 127-83, 141-84) August, 1985 L. U. 1’ ’’ b b MASTER COPY - FOR...and Mechanisms of Creep in Sintered May 1, 1982-June 15, 1985 Alpha Silicon Carbide and Niobium Carbide 6. PERFORMING ORG. REPORT NUMBER 7. AUTHOR(*) 11

  20. Demonstration of Minimally Machined Honeycomb Silicon Carbide Mirrors

    Science.gov (United States)

    Goodman, William

    2012-01-01

    Honeycomb silicon carbide composite mirrors are made from a carbon fiber preform that is molded into a honeycomb shape using a rigid mold. The carbon fiber honeycomb is densified by using polymer infiltration pyrolysis, or through a reaction with liquid silicon. A chemical vapor deposit, or chemical vapor composite (CVC), process is used to deposit a polishable silicon or silicon carbide cladding on the honeycomb structure. Alternatively, the cladding may be replaced by a freestanding, replicated CVC SiC facesheet that is bonded to the honeycomb. The resulting carbon fiber-reinforced silicon carbide honeycomb structure is a ceramic matrix composite material with high stiffness and mechanical strength, high thermal conductivity, and low CTE (coefficient of thermal expansion). This innovation enables rapid, inexpensive manufacturing. The web thickness of the new material is less than 1 millimeter, and core geometries tailored. These parameters are based on precursor carbon-carbon honeycomb material made and patented by Ultracor. It is estimated at the time of this reporting that the HoneySiC(Trademark) will have a net production cost on the order of $38,000 per square meter. This includes an Ultracor raw material cost of about $97,000 per square meter, and a Trex silicon carbide deposition cost of $27,000 per square meter. Even at double this price, HoneySiC would beat NASA's goal of $100,000 per square meter. Cost savings are estimated to be 40 to 100 times that of current mirror technologies. The organic, rich prepreg material has a density of 56 kilograms per cubic meter. A charred carbon-carbon panel (volatile organics burnt off) has a density of 270 kilograms per cubic meter. Therefore, it is estimated that a HoneySiC panel would have a density of no more than 900 kilograms per cubic meter, which is about half that of beryllium and about onethird the density of bulk silicon carbide. It is also estimated that larger mirrors could be produced in a matter of weeks

  1. Field Emission of Thermally Grown Carbon Nanostructures on Silicon Carbide

    Science.gov (United States)

    2012-03-22

    thermal decomposition of silicon carbide does not utilize a catalyst, therefore relatively defect free. One drawback to this method, however is that the CNT...In this thesis, silicon carbide samples are patterned to create elevated emission sites in an attempt to minimize the field emission screening effect...Patterning is accomplished by using standard photolithography methods to implement a masking nickel layer on the silicon carbide . Pillars are created

  2. Chemical Modification Methods of Nanoparticles of Silicon Carbide Surface

    Directory of Open Access Journals (Sweden)

    Anton S. Yegorov

    2015-09-01

    Full Text Available silicon carbide exhibits exceptional properties: high durability, high thermal conductivity, good heat resistance, low thermal expansion factor and chemical inactivity. Reinforcement with silicon carbide nanoparticles increases polymer’s tensile strength and thermal stability.Chemical methods of modification of the silicon carbide surface by means of variety of reagents from ordinary molecules to macromolecular polymers are reviewed in the review.The structure of silicon carbide surface layer and the nature of modificator bonding with the surface of SiC particles are reviewed. General examples of surface modification methodologies and composite materials with the addition of modified SiC are given.

  3. Silicon Carbide Corrugated Mirrors for Space Telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Trex Enterprises Corporation (Trex) proposes technology development to manufacture monolithic, lightweight silicon carbide corrugated mirrors (SCCM) suitable for...

  4. HEAT-RESISTANT MATERIAL WITH SILICON CARBIDE AS A BASE,

    Science.gov (United States)

    A new high-temperature material, termed SG-60, is a silicon carbide -graphite composite in which the graphite is the thermostability carrier since it...is more heat-conducting and softer (heat conductivity of graphite is 0.57 cal/g-cm-sec compared with 0.02 cal/g-cm-sec for silicon carbide ) while... silicon carbide is the carrier of high-temperature strength and hardness. The high covalent bonding strength of the atoms of silicon carbide (283 kcal

  5. Indentation fatigue in silicon nitride, alumina and silicon carbide ceramics

    Indian Academy of Sciences (India)

    A K Mukhopadhyay

    2001-04-01

    Repeated indentation fatigue (RIF) experiments conducted on the same spot of different structural ceramics viz. a hot pressed silicon nitride (HPSN), sintered alumina of two different grain sizes viz. 1 m and 25 m, and a sintered silicon carbide (SSiC) are reported. The RIF experiments were conducted using a Vicker’s microhardness tester at various loads in the range 1–20 N. Subsequently, the gradual evolution of the damage was characterized using an optical microscope in conjunction with the image analysing technique. The materials were classified in the order of the decreasing resistance against repeated indentation fatigue at the highest applied load of 20 N. It was further shown that there was a strong influence of grain size on the development of resistance against repeated indentation fatigue on the same spot. Finally, the poor performance of the sintered silicon carbide was found out to be linked to its previous thermal history.

  6. Shock-wave strength properties of boron carbide and silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Grady, D.E.

    1994-02-01

    Time-resolved velocity interferometry measurements have been made on boron carbide and silicon carbide ceramics to assess dynamic equation-of-state and strength properties of these materials. Hugoniot pecursor characteristics, and post-yield shock and release wave properties, indicated markedly different dynamic strength and flow behavior for the two carbides.

  7. Reaction Kinetics of Nanostructured Silicon Carbide

    Science.gov (United States)

    Wallis, Kendra; Zerda, T. W.

    2006-10-01

    Nanostructured silicon carbide (SiC) is of interest particularly for use in nanocomposites that demonstrate high hardness as well as for use in semiconductor applications. Reaction kinetics studies of solid-solid reactions are relatively recent and present a method of determining the reaction mechanism and activation energy by measuring reaction rates. We have used induction heating to heat quickly, thus reducing the error in reaction time measurements. Data will be presented for reactions using silicon nanopowder (melting point of silicon. Using the well-known Avrami-Erofeev model, a two-parameter chi- square fit of the data provided a rate constant (k) and parameter (n), related to the reaction mechanism, for each temperature. From these data, an activation energy of 138 kJ/mol was calculated. In addition, the parameter n suggests the reaction mechanism, which will also be discussed. Experiments are continuing at higher temperatures to consider the liquid- solid reaction as well.

  8. Study of irradiation effects in the silicon carbide cubic polytype by photoluminescence and electron spin resonance spectroscopies; Etude des effets d'irradiation dans le polytype cubique du carbure de silicium par les techniques spectroscopiques de photoluminescence et de resonance paramagnetique electronique

    Energy Technology Data Exchange (ETDEWEB)

    Lefevre, J

    2008-01-15

    This experimental work has consisted in the study of point defects induced by an electronic irradiation in the cubic crystallographic structure of silicon carbide with low temperature photoluminescence and electron spin resonance spectroscopies. The first one of these measurement tools has allowed to estimate the displacement threshold energy in the silicon sub-lattice and then to analyze the thermal stability of the irradiation defects in the low temperature range: (10-300 K) and then in the high temperature range: (300-1400 K). Besides, on the base of a recent theoretical model, this thesis has confirmed the proposition of the isolated silicon antisite for the D1 center whose running beyond the nominal running temperature of fission nuclear reactors (generation IV), for which SiC is in part intended, seems to be particularly problematic. Measurements carried out by ESR under lighting have at last allowed to detect a new defect in its metastable spin state S=1, possibly associated to a silicon interstitial configuration. (O.M.)

  9. Interface Defeat of Long Rods Impacting Oblique Silicon Carbide

    Science.gov (United States)

    2011-02-01

    Test data for gold rods impacting unconfined silicon carbide targets are reported. This work focuses on the dwell phenomenon exhibited by silicon ... carbide for targets at obliquity. Experiments are presented for obliquities of 30 deg, 45 deg and 60 deg, with and without cover plates. Results are compared to normal impact.

  10. Silicon Carbide Tiles for Sidewall Lining in Aluminium Electrolysis Cells

    Institute of Scientific and Technical Information of China (English)

    RUANBo; ZHAOJunguo; 等

    1999-01-01

    The paper introduces the nitride bonded silicon carbide used for sidewall lining in aluminium eletrolysis cells ,including technical process,main properties and application results.Comparison tests on various physical properties of silicon carbide products made by LIRR and other producers worldwide have also been conducted in an independent laboratory.

  11. Rapid cost-effective silicon carbide optical component manufacturing technique

    Science.gov (United States)

    Casstevens, John M.; Plummer, Ronald; Jarocki, Jim

    1999-10-01

    Silicon carbide may well be the best known material for the manufacture of high performance optical components. A combination of extremely high specific stiffness (r/E), high thermal conductivity and outstanding dimensional stability make silicon carbide superior overall to beryllium and low- expansion glass ceramics. A major impediment to wide use of silicon carbide in optical systems has been the costs of preliminary pressing, casting, shaping and final finishing of silicon carbide. Diamond grinding of silicon carbide is a slow and expensive process even on machines specially designed for the task. The process described here begins by machining the component from a special type of graphite. This graphite is easily machined with multi-axis CNC machine tools to any level of complexity and lightweighting required. The graphite is then converted completely to silicon carbide with very small and very predictable dimensional change. After conversion to silicon carbide the optical surface is coated with very fine grain silicon carbide which is easily polished to extreme smoothness using conventional optical polishing techniques. The fabrication process and a 6 inch diameter development mirror is described.

  12. Novel Polymer Nanocomposite With Silicon Carbide Nanoparticles

    Directory of Open Access Journals (Sweden)

    Alyona I. Wozniak

    2015-09-01

    Full Text Available Polyimides are ranked among the most heat-resistant polymers and are widely used in high temperature plastics, adhesives, dielectrics, photoresistors, nonlinear optical materials, membrane materials for gasseparation, and Langmuir–Blodgett (LB films, among others. While there is a variety of high temperature stable polyimides, there is a growing demand for utilizing these materials at higher temperatures in oxidizing and aggressive environments. Therefore, we sought to use oxidation-resistant materials to enhance properties of the polyimide composition maintaining polyimide weights and processing advantages. In this paper we introduced results of utilizing inorganic nanostructured silicon carbide particles to produce an inorganic particle filled polyimide materials.

  13. Mechanical characteristics of microwave sintered silicon carbide

    Indian Academy of Sciences (India)

    S Mandal; A Seal; S K Dalui; A K Dey; S Ghatak; A K Mukhopadhyay

    2001-04-01

    The present work deals with the sintering of SiC with a low melting additive by microwave technique. The mechanical characteristics of the products were compared with that of conventionally sintered products. The failure stress of the microwave sintered products, in biaxial flexure, was superior to that of the products made by conventional sintering route in ambient condition. In firing of products by conventionally sintered process, SiC grain gets oxidized producing SiO2 (∼ 32 wt%) and deteriorates the quality of the product substantially. Partially sintered silicon carbide by such a method is a useful material for a varieties of applications ranging from kiln furniture to membrane material.

  14. Fluorescent silicon carbide materials for white LEDs and photovoltaics

    DEFF Research Database (Denmark)

    Syväjärvi, Mikael; Ou, Haiyan; Wellmann, Peter

    Energy efficient materials solutions will be key figures in progressive energy saving applications. We explore a materials growth concept of fluorescent wide bandgap semiconductors for white and infrared LEDs as well as solar cells. This is an emerging scientific field which has not previously been...... explored. The applications include a white LED for general lighting in which the conversion is based on the semiconductor instead of using phosphors. The result is an LED technology which does not need rare earth metals and has a pure white light. In efficient fluorescent materials, the absorption may...... the luminescence appears in the visible region which is used to produce a white LED with pure white light without need of phosphors [2]. The cubic silicon carbide polytype is challenging to master, and we have explored the growth of this crystal structure. It has a lower bandgap, and by a similar doping concept...

  15. Dispersion of nonresonant third-order nonlinearities in Silicon Carbide

    Science.gov (United States)

    De Leonardis, Francesco; Soref, Richard A.; Passaro, Vittorio M. N.

    2017-01-01

    In this paper we present a physical discussion of the indirect two-photon absorption (TPA) occuring in silicon carbide with either cubic or wurtzite structure. Phonon-electron interaction is analyzed by finding the phonon features involved in the process as depending upon the crystal symmetry. Consistent physical assumptions about the phonon-electron scattering mechanisms are proposed in order to give a mathematical formulation to predict the wavelength dispersion of TPA and the Kerr nonlinear refractive index n2. The TPA spectrum is investigated including the effects of band nonparabolicity and the influence of the continuum exciton. Moreover, a parametric analysis is presented in order to fit the experimental measurements. Finally, we have estimated the n2 in a large wavelength range spanning the visible to the mid-IR region. PMID:28098223

  16. Dispersion of nonresonant third-order nonlinearities in Silicon Carbide

    Science.gov (United States)

    de Leonardis, Francesco; Soref, Richard A.; Passaro, Vittorio M. N.

    2017-01-01

    In this paper we present a physical discussion of the indirect two-photon absorption (TPA) occuring in silicon carbide with either cubic or wurtzite structure. Phonon-electron interaction is analyzed by finding the phonon features involved in the process as depending upon the crystal symmetry. Consistent physical assumptions about the phonon-electron scattering mechanisms are proposed in order to give a mathematical formulation to predict the wavelength dispersion of TPA and the Kerr nonlinear refractive index n2. The TPA spectrum is investigated including the effects of band nonparabolicity and the influence of the continuum exciton. Moreover, a parametric analysis is presented in order to fit the experimental measurements. Finally, we have estimated the n2 in a large wavelength range spanning the visible to the mid-IR region.

  17. Silicon Carbide Nanotube Oxidation at High Temperatures

    Science.gov (United States)

    Ahlborg, Nadia; Zhu, Dongming

    2012-01-01

    Silicon Carbide Nanotubes (SiCNTs) have high mechanical strength and also have many potential functional applications. In this study, SiCNTs were investigated for use in strengthening high temperature silicate and oxide materials for high performance ceramic nanocomposites and environmental barrier coating bond coats. The high · temperature oxidation behavior of the nanotubes was of particular interest. The SiCNTs were synthesized by a direct reactive conversion process of multiwall carbon nanotubes and silicon at high temperature. Thermogravimetric analysis (TGA) was used to study the oxidation kinetics of SiCNTs at temperatures ranging from 800degC to1300degC. The specific oxidation mechanisms were also investigated.

  18. Converting a carbon preform object to a silicon carbide object

    Science.gov (United States)

    Levin, Harry (Inventor)

    1990-01-01

    A process for converting in depth a carbon or graphite preform object to a silicon carbide object, silicon carbide/silicon object, silicon carbide/carbon-core object, or a silicon carbide/silicon/carbon-core object, by contacting it with silicon liquid and vapor over various lengths of contact time in a reaction chamber. In the process, a stream comprised of a silicon-containing precursor material in gaseous phase below the decomposition temperature of said gas and a coreactant, carrier or diluent gas such as hydrogen is passed through a hole within a high emissivity, thin, insulating septum into the reaction chamber above the melting point of silicon. The thin septum has one face below the decomposition temperature of the gas and an opposite face exposed to the reaction chamber. Thus, the precursor gas is decomposed directly to silicon in the reaction chamber. Any stream of decomposition gas and any unreacted precursor gas from the reaction chamber is removed. A carbon or graphite preform object placed in the reaction chamber is contacted with the silicon. The carbon or graphite preform object is recovered from the reactor chamber after it has been converted to a desired silicon carbide, silicon and carbon composition.

  19. Oxide film assisted dopant diffusion in silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Tin, Chin-Che, E-mail: cctin@physics.auburn.ed [Department of Physics, Auburn University, Alabama 36849 (United States); Mendis, Suwan [Department of Physics, Auburn University, Alabama 36849 (United States); Chew, Kerlit [Department of Electrical and Electronic Engineering, Faculty of Engineering and Science, Universiti Tunku Abdul Rahman, Kuala Lumpur (Malaysia); Atabaev, Ilkham; Saliev, Tojiddin; Bakhranov, Erkin [Physical Technical Institute, Uzbek Academy of Sciences, 700084 Tashkent (Uzbekistan); Atabaev, Bakhtiyar [Institute of Electronics, Uzbek Academy of Sciences, 700125 Tashkent (Uzbekistan); Adedeji, Victor [Department of Chemistry, Geology and Physics, Elizabeth City State University, North Carolina 27909 (United States); Rusli [School of Electrical and Electronic Engineering, Nanyang Technological University (Singapore)

    2010-10-01

    A process is described to enhance the diffusion rate of impurities in silicon carbide so that doping by thermal diffusion can be done at lower temperatures. This process involves depositing a thin film consisting of an oxide of the impurity followed by annealing in an oxidizing ambient. The process uses the lower formation energy of silicon dioxide relative to that of the impurity-oxide to create vacancies in silicon carbide and to promote dissociation of the impurity-oxide. The impurity atoms then diffuse from the thin film into the near-surface region of silicon carbide.

  20. High precision optical finishing of lightweight silicon carbide aspheric mirror

    Science.gov (United States)

    Kong, John; Young, Kevin

    2010-10-01

    Critical to the deployment of large surveillance optics into the space environment is the generation of high quality optics. Traditionally, aluminum, glass and beryllium have been used; however, silicon carbide becomes of increasing interest and availability due to its high strength. With the hardness of silicon carbide being similar to diamond, traditional polishing methods suffer from slow material removal rates, difficulty in achieving the desired figure and inherent risk of causing catastrophic damage to the lightweight structure. Rather than increasing structural capacity and mass of the substrate, our proprietary sub-aperture aspheric surface forming technology offers higher material removal rates (comparable to that of Zerodur or Fused Silica), a deterministic approach to achieving the desired figure while minimizing contact area and the resulting load on the optical structure. The technology performed on computer-controlled machines with motion control software providing precise and quick convergence of surface figure, as demonstrated by optically finishing lightweight silicon carbide aspheres. At the same time, it also offers the advantage of ideal pitch finish of low surface micro-roughness and low mid-spatial frequency error. This method provides a solution applicable to all common silicon carbide substrate materials, including substrates with CVD silicon carbide cladding, offered by major silicon carbide material suppliers. This paper discusses a demonstration mirror we polished using this novel technology. The mirror is a lightweight silicon carbide substrate with CVD silicon carbide cladding. It is a convex hyperbolic secondary mirror with 104mm diameter and approximately 20 microns aspheric departure from best-fit sphere. The mirror has been finished with surface irregularity of better than 1/50 wave RMS @632.8 nm and surface micro-roughness of under 2 angstroms RMS. The technology has the potential to be scaled up for manufacturing capabilities of

  1. Predicting Two-Dimensional Silicon Carbide Monolayers.

    Science.gov (United States)

    Shi, Zhiming; Zhang, Zhuhua; Kutana, Alex; Yakobson, Boris I

    2015-10-27

    Intrinsic semimetallicity of graphene and silicene largely limits their applications in functional devices. Mixing carbon and silicon atoms to form two-dimensional (2D) silicon carbide (SixC1-x) sheets is promising to overcome this issue. Using first-principles calculations combined with the cluster expansion method, we perform a comprehensive study on the thermodynamic stability and electronic properties of 2D SixC1-x monolayers with 0 ≤ x ≤ 1. Upon varying the silicon concentration, the 2D SixC1-x presents two distinct structural phases, a homogeneous phase with well dispersed Si (or C) atoms and an in-plane hybrid phase rich in SiC domains. While the in-plane hybrid structure shows uniform semiconducting properties with widely tunable band gap from 0 to 2.87 eV due to quantum confinement effect imposed by the SiC domains, the homogeneous structures can be semiconducting or remain semimetallic depending on a superlattice vector which dictates whether the sublattice symmetry is topologically broken. Moreover, we reveal a universal rule for describing the electronic properties of the homogeneous SixC1-x structures. These findings suggest that the 2D SixC1-x monolayers may present a new "family" of 2D materials, with a rich variety of properties for applications in electronics and optoelectronics.

  2. Stored energy in irradiated silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Snead, L.L.; Burchell, T.D. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    This report presents a short review of the phenomenon of Wigner stored energy release from irradiated graphite and discusses it in relation to neutron irradiation of silicon carbide. A single published work in the area of stored energy release in SiC is reviewed and the results are discussed. It appears from this previous work that because the combination of the comparatively high specific heat of SiC and distribution in activation energies for recombining defects, the stored energy release of SiC should only be a problem at temperatures lower than those considered for fusion devices. The conclusion of this preliminary review is that the stored energy release in SiC will not be sufficient to cause catastrophic heating in fusion reactor components, though further study would be desirable.

  3. Tunable plasticity in amorphous silicon carbide films.

    Science.gov (United States)

    Matsuda, Yusuke; Kim, Namjun; King, Sean W; Bielefeld, Jeff; Stebbins, Jonathan F; Dauskardt, Reinhold H

    2013-08-28

    Plasticity plays a crucial role in the mechanical behavior of engineering materials. For instance, energy dissipation during plastic deformation is vital to the sufficient fracture resistance of engineering materials. Thus, the lack of plasticity in brittle hybrid organic-inorganic glasses (hybrid glasses) often results in a low fracture resistance and has been a significant challenge for their integration and applications. Here, we demonstrate that hydrogenated amorphous silicon carbide films, a class of hybrid glasses, can exhibit a plasticity that is even tunable by controlling their molecular structure and thereby leads to an increased and adjustable fracture resistance in the films. We decouple the plasticity contribution from the fracture resistance of the films by estimating the "work-of-fracture" using a mean-field approach, which provides some insight into a potential connection between the onset of plasticity in the films and the well-known rigidity percolation threshold.

  4. Stable field emission from nanoporous silicon carbide.

    Science.gov (United States)

    Kang, Myung-Gyu; Lezec, Henri J; Sharifi, Fred

    2013-02-15

    We report on a new type of stable field emitter capable of electron emission at levels comparable to thermal sources. Such an emitter potentially enables significant advances in several important technologies which currently use thermal electron sources. These include communications through microwave electronics, and more notably imaging for medicine and security where new modalities of detection may arise due to variable-geometry x-ray sources. Stable emission of 6 A cm(-2) is demonstrated in a macroscopic array, and lifetime measurements indicate these new emitters are sufficiently robust to be considered for realistic implementation. The emitter is a monolithic structure, and is made in a room-temperature process. It is fabricated from a silicon carbide wafer, which is formed into a highly porous structure resembling an aerogel, and further patterned into an array. The emission properties may be tuned both through control of the nanoscale morphology and the macroscopic shape of the emitter array.

  5. Preparation of Silicon Carbide with High Properties

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In order to prepare silicon carbide with high properties, three kinds of SiC powders A, B, and C with different composition and two kinds of additives, which were Y2O3-Al2O3 system and Y2O3-La2O3 system, were used in this experiment. The properties of hot-pressed SiC ceramics were measured. With the same additives, different SiC powder resulted in different properties. On the other hand, with the same SiC powder, increasing the amount of the additive Y2O3-Al2O3 improved properties of SiC ceramics at room temperature, and increasing the amount of the additive Y2O3-La2O3 improved property SiC ceramics at elevated temperature. In addition, the microstructure of SiC ceramics was studied by scanning electron microscopy.

  6. Thermal Oxidation of Silicon Carbide Substrates

    Institute of Scientific and Technical Information of China (English)

    Xiufang Chen; Li'na Ning; Yingmin Wang; Juan Li; Xiangang Xu; Xiaobo Hu; Minhua Jiang

    2009-01-01

    Thermal oxidation was used to remove the subsurface damage of silicon carbide (SiC) surfaces. The anisotrow of oxidation and the composition of oxide layers on Si and C faces were analyzed. Regular pits were observed on the surface after the removal of the oxide layers, which were detrimental to the growth of high quality epitaxial layers. The thickness and composition of the oxide layers were characterized by Rutherford backscat-tering spectrometry (RBS) and X-ray photoelectron spectroscopy (XPS), respectively. Epitaxial growth was performed in a metal organic chemical vapor deposition (MOCVD) system. The substrate surface morphol-ogy after removing the oxide layer and gallium nitride (GaN) epilayer surface were observed by atomic force microscopy (AFM). The results showed that the GaN epilayer grown on the oxidized substrates was superior to that on the unoxidized substrates.

  7. Development of a silicon carbide sewing thread

    Science.gov (United States)

    Sawko, Paul M.; Vasudev, Anand

    1989-01-01

    A silicon carbide (SiC) sewing thread has been designed which consists of a two-ply yarn in a 122 turns-per-meter-twist construction. Two processing aids in thread construction were evaluated. Prototype blankets were sewn using an SiC thread prepared either with polytetrafluoroethylene sizing or with an overwrap of rayon/dacron service yarn. The rayon/dacron-wrapped SiC thread was stronger, as shown by higher break-strength retention and less damage to the outer-mold-line fabric. This thread enables thermal protection system articles to be sewn or joined, or have perimeter close-out of assembled parts when using SiC fabric for high-temperature applications.

  8. A review of oxide, silicon nitride, and silicon carbide brazing

    Energy Technology Data Exchange (ETDEWEB)

    Santella, M.L.; Moorhead, A.J.

    1987-01-01

    There is growing interest in using ceramics for structural applications, many of which require the fabrication of components with complicated shapes. Normal ceramic processing methods restrict the shapes into which these materials can be produced, but ceramic joining technology can be used to overcome many of these limitations, and also offers the possibility for improving the reliability of ceramic components. One method of joining ceramics is by brazing. The metallic alloys used for bonding must wet and adhere to the ceramic surfaces without excessive reaction. Alumina, partially stabilized zirconia, and silicon nitride have high ionic character to their chemical bonds and are difficult to wet. Alloys for brazing these materials must be formulated to overcome this problem. Silicon carbide, which has some metallic characteristics, reacts excessively with many alloys, and forms joints of low mechanical strength. The brazing characteristics of these three types of ceramics, and residual stresses in ceramic-to-metal joints are briefly discussed.

  9. Silicon carbide materials for high duty seal applications

    Energy Technology Data Exchange (ETDEWEB)

    Berroth, K.E. (Schunk Ingenieurkeramik GmbH, Duesseldorf (Germany, F.R.))

    1990-12-01

    Properties, fabrication, and high-duty applications of silicon carbide grades are discussed. The two types of silicon carbide, i.e., reaction-bonded and sintered, are considered. The potential for adhesion and the lack of dry running abilities lead to a variety of microstructures. For reaction-bonded silicon carbide, the microstructure can be a tool for optimization of the tribological behavior. Besides the high corrosion resistance of the material, its thermal conductivity is excellent. Grain sizes of about 40-50 microns are used in high-duty applications. Reaction-bonded silicon carbide with residual content of carbon graphite has improved tribological/hydrodynamic characteristics and performs well in sealing hard faces.

  10. Ion implantation phenomena in 4H-silicon carbide

    CERN Document Server

    Phelps, Gordon James

    2003-01-01

    Silicon Carbide is a promising wide band gap semiconductor with many new properties yet to be established and investigated. Ion implantation is the dominant method of incorporating dopant materials into the Silicon Carbide crystalline structure for electronic device fabrication. The implantation process of dopants into Silicon Carbide, both theoretical and practical, is described in this Thesis. Additional fabrication process steps, such as annealing, and their implications are also described. To gain further insight into the process of ion implantation into Silicon Carbide, the detailed design of a special test die is discussed. The aim of the special test die was to obtain general information such as implanted dopant sheet resistivity and to test a novel bipolar transistor design. The fabrication steps involved for the special test die are discussed in detail. The results from the special test die take the form of specific electrical measurements, together with detailed visual observations provided by a sca...

  11. Impact-resistant silicon-carbide-based ceramic materials

    Science.gov (United States)

    Perevislov, S. N.; Bespalov, I. A.

    2017-08-01

    The bullet resistance is determined by an indirect method, by evaluation of time of delay of penetration by bullet of the silicon-carbide-based ceramics obtained by reactive sintering, liquid-phase sintering, and hot pressing.

  12. Silicon Carbide Threads For High-Temperature Service

    Science.gov (United States)

    Sawko, Paul M.; Vasudev, Anand

    1991-01-01

    New thread material outperforms silica. Sewing threads containing silicon carbide (SiC) yarn withstand temperatures of more than 1,100 degrees C. Intended for use in stitching thermally insulating blankets.

  13. Process for preparing fine grain silicon carbide powder

    Science.gov (United States)

    Wei, G.C.

    Method of producing fine-grain silicon carbide powder comprises combining methyltrimethoxysilane with a solution of phenolic resin, acetone and water or sugar and water, gelling the resulting mixture, and then drying and heating the obtained gel.

  14. ADHERENCE AND PROPERTIES OF SILICON CARBIDE BASED FILMS ON STEEL

    OpenAIRE

    Lelogeais, M.; Ducarroir, M.; Berjoan, R.

    1991-01-01

    Coatings of silicon carbide with various compositions have been obtained in a r.f plasma assisted process using tetramethylsilane and argon as input gases. Some properties against mechanical applications of such deposits on steel have been investigated. Residual stresses and hardness are reported and discussed in relation with plasma parameters and deposit composition. By scratch testing, it was shown that the silicon carbide films on steel denote a good adherence when compared with previous ...

  15. Implanted Bottom Gate for Epitaxial Graphene on Silicon Carbide

    OpenAIRE

    Waldmann, Daniel; Jobst, Johannes; Fromm, Felix; Speck, Florian; Seyller, Thomas; Krieger, Michael; Weber, Heiko B.

    2011-01-01

    We present a technique to tune the charge density of epitaxial graphene via an electrostatic gate that is buried in the silicon carbide substrate. The result is a device in which graphene remains accessible for further manipulation or investigation. Via nitrogen or phosphor implantation into a silicon carbide wafer and subsequent graphene growth, devices can routinely be fabricated using standard semiconductor technology. We have optimized samples for room temperature as well as for cryogenic...

  16. Single-Event Effects in Silicon Carbide Power Devices

    Science.gov (United States)

    Lauenstein, Jean-Marie; Casey, Megan C.; LaBel, Kenneth A.; Ikpe, Stanley; Topper, Alyson D.; Wilcox, Edward P.; Kim, Hak; Phan, Anthony M.

    2015-01-01

    This report summarizes the NASA Electronic Parts and Packaging Program Silicon Carbide Power Device Subtask efforts in FY15. Benefits of SiC are described and example NASA Programs and Projects desiring this technology are given. The current status of the radiation tolerance of silicon carbide power devices is given and paths forward in the effort to develop heavy-ion single-event effect hardened devices indicated.

  17. Thermal properties of wood-derived silicon carbide and copper-silicon carbide composites

    Science.gov (United States)

    Pappecena, Kristen E.

    Wood-derived ceramics and composites have been of interest in recent years due to their unique microstructures, which lead to tailorable properties. The porosity and pore size distribution of each wood type is different, which yields variations in properties in the resultant materials. The thermal properties of silicon carbide ceramics and copper-silicon carbide composites derived from wood were studied as a function of their pore structures. Wood was pyrolyzed at temperatures ranging from 300-2400°C to yield porous carbon. The progression toward long-range order was studied as a function of pyrolyzation temperature. Biomorphic silicon carbide (bioSiC) is a porous ceramic material resulting from silicon melt infiltration of these porous carbon materials. BioSiC has potential applicability in many high temperature environments, particularly those in which rapid temperature changes occur. To understand the behavior of bioSiC at elevated temperatures, the thermal and thermo-mechanical properties were studied. The thermal conductivity of bioSiC from five precursors was determined using flash diffusivity at temperatures up to 1100°C. Thermal conductivity results varied with porosity, temperature and orientation, and decreased from 42-13 W/mK for porosities of 43-69%, respectively, at room temperature. The results were compared with to object-oriented finite-element analysis (OOF). OOF was also used to model and understand the heat-flow paths through the complex bioSiC microstructures. The thermal shock resistance of bioSiC was also studied, and no bioSiC sample was found to fail catastrophically after up to five thermal shock cycles from 1400°C to room temperature oil. Copper-silicon carbide composites have potential uses in thermal management applications due to the high thermal conductivity of each phase. Cu-bioSiC composites were created by electrodeposition of copper into bioSiC pores. The detrimental Cu-SiC reaction was avoided by using this room temperature

  18. Single-Event Effects in Silicon and Silicon Carbide Power Devices

    Science.gov (United States)

    Lauenstein, Jean-Marie; Casey, Megan C.; LaBel, Kenneth A.; Topper, Alyson D.; Wilcox, Edward P.; Kim, Hak; Phan, Anthony M.

    2014-01-01

    NASA Electronics Parts and Packaging program-funded activities over the past year on single-event effects in silicon and silicon carbide power devices are presented, with focus on SiC device failure signatures.

  19. Process for coating an object with silicon carbide

    Science.gov (United States)

    Levin, Harry (Inventor)

    1989-01-01

    A process for coating a carbon or graphite object with silicon carbide by contacting it with silicon liquid and vapor over various lengths of contact time. In the process, a stream of silicon-containing precursor material in gaseous phase below the decomposition temperature of said gas and a co-reactant, carrier or diluent gas such as hydrogen is passed through a hole within a high emissivity, thin, insulating septum into a reaction chamber above the melting point of silicon. The thin septum has one face below the decomposition temperature of the gas and an opposite face exposed to the reaction chamber. The precursor gas is decomposed directly to silicon in the reaction chamber. A stream of any decomposition gas and any unreacted precursor gas from said reaction chamber is removed. The object within the reaction chamber is then contacted with silicon, and recovered after it has been coated with silicon carbide.

  20. FTIR study of silicon carbide amorphization by heavy ion irradiations

    Science.gov (United States)

    Costantini, Jean-Marc; Miro, Sandrine; Pluchery, Olivier

    2017-03-01

    We have measured at room temperature (RT) the Fourier-transform infra-red (FTIR) absorption spectra of ion-irradiated thin epitaxial films of cubic silicon carbide (3C–SiC) with 1.1 µm thickness on a 500 µm thick (1 0 0) silicon wafer substrate. Irradiations were carried out at RT with 2.3 MeV 28Si+ ions and 3.0 MeV 84Kr+ ions for various fluences in order to induce amorphization of the SiC film. Ion projected ranges were adjusted to be slightly larger than the film thickness so that the whole SiC layers were homogeneously damaged. FTIR spectra of virgin and irradiated samples were recorded for various incidence angles from normal incidence to Brewster’s angle. We show that the amorphization process in ion-irradiated 3C–SiC films can be monitored non-destructively by FTIR absorption spectroscopy without any major interference of the substrate. The compared evolutions of TO and LO peaks upon ion irradiation yield valuable information on the damage process. Complementary test experiments were also performed on virgin silicon nitride (Si3N4) self-standing films for similar conditions. Asymmetrical shapes were found for TO peaks of SiC, whereas Gaussian profiles are found for LO peaks. Skewed Gaussian profiles, with a standard deviation depending on wave number, were used to fit asymmetrical peaks for both materials. A new methodology for following the amorphization process is proposed on the basis of the evolution of fitted IR absorption peak parameters with ion fluence. Results are discussed with respect to Rutherford backscattering spectrometry channeling and Raman spectroscopy analysis.

  1. Methods for producing silicon carbide architectural preforms

    Science.gov (United States)

    DiCarlo, James A. (Inventor); Yun, Hee (Inventor)

    2010-01-01

    Methods are disclosed for producing architectural preforms and high-temperature composite structures containing high-strength ceramic fibers with reduced preforming stresses within each fiber, with an in-situ grown coating on each fiber surface, with reduced boron within the bulk of each fiber, and with improved tensile creep and rupture resistance properties for each fiber. The methods include the steps of preparing an original sample of a preform formed from a pre-selected high-strength silicon carbide ceramic fiber type, placing the original sample in a processing furnace under a pre-selected preforming stress state and thermally treating the sample in the processing furnace at a pre-selected processing temperature and hold time in a processing gas having a pre-selected composition, pressure, and flow rate. For the high-temperature composite structures, the method includes additional steps of depositing a thin interphase coating on the surface of each fiber and forming a ceramic or carbon-based matrix within the sample.

  2. Casimir forces from conductive silicon carbide surfaces

    Science.gov (United States)

    Sedighi, M.; Svetovoy, V. B.; Broer, W. H.; Palasantzas, G.

    2014-05-01

    Samples of conductive silicon carbide (SiC), which is a promising material due to its excellent properties for devices operating in severe environments, were characterized with the atomic force microscope for roughness, and the optical properties were measured with ellipsometry in a wide range of frequencies. The samples show significant far-infrared absorption due to concentration of charge carriers and a sharp surface phonon-polariton peak. The Casimir interaction of SiC with different materials is calculated and discussed. As a result of the infrared structure and beyond to low frequencies, the Casimir force for SiC-SiC and SiC-Au approaches very slowly the limit of ideal metals, while it saturates significantly below this limit if interaction with insulators takes place (SiC-SiO2). At short separations (<10 nm) analysis of the van der Waals force yielded Hamaker constants for SiC-SiC interactions lower but comparable to those of metals, which is of significance to adhesion and surface assembly processes. Finally, bifurcation analysis of microelectromechanical system actuation indicated that SiC can enhance the regime of stable equilibria against stiction.

  3. Casimir force measurements from silicon carbide surfaces

    Science.gov (United States)

    Sedighi, M.; Svetovoy, V. B.; Palasantzas, G.

    2016-02-01

    Using an atomic force microscope we performed measurements of the Casimir force between a gold- coated (Au) microsphere and doped silicon carbide (SiC) samples. The last of these is a promising material for devices operating under severe environments. The roughness of the interacting surfaces was measured to obtain information for the minimum separation distance upon contact. Ellipsometry data for both systems were used to extract optical properties needed for the calculation of the Casimir force via the Lifshitz theory and for comparison to the experiment. Special attention is devoted to the separation of the electrostatic contribution to the measured total force. Our measurements demonstrate large contact potential V0(≈0.67 V ) , and a relatively small density of charges trapped in SiC. Knowledge of both Casimir and electrostatic forces between interacting materials is not only important from the fundamental point of view, but also for device applications involving actuating components at separations of less than 200 nm where surface forces play dominant role.

  4. Highly permeable and mechanically robust silicon carbide hollow fiber membranes

    NARCIS (Netherlands)

    de Wit, Patrick; Kappert, Emiel; Lohaus, T.; Wessling, Matthias; Nijmeijer, Arian; Benes, Nieck Edwin

    2015-01-01

    Silicon carbide (SiC) membranes have shown large potential for applications in water treatment. Being able to make these membranes in a hollow fiber geometry allows for higher surface-to-volume ratios. In this study, we present a thermal treatment procedure that is tuned to produce porous silicon

  5. Highly permeable and mechanically robust silicon carbide hollow fiber membranes

    NARCIS (Netherlands)

    Wit, de P.; Kappert, Emiel J.; Lohaus, T.; Wessling, M.; Nijmeijer, A.; Benes, N.E.

    2015-01-01

    Silicon carbide (SiC) membranes have shown large potential for applications in water treatment. Being able to make these membranes in a hollow fiber geometry allows for higher surface-to-volume ratios. In this study, we present a thermal treatment procedure that is tuned to produce porous silicon ca

  6. MAGNESIUM PRECIPITATION AND DIFUSSION IN Mg+ ION IMPLANTED SILICON CARBIDE

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Weilin; Jung, Hee Joon; Kovarik, Libor; Wang, Zhaoying; Roosendaal, Timothy J.; Zhu, Zihua; Edwards, Danny J.; Hu, Shenyang Y.; Henager, Charles H.; Kurtz, Richard J.; Wang, Yongqiang

    2015-03-02

    As a candidate material for fusion reactor applications, silicon carbide (SiC) undergoes transmutation reactions under high-energy neutron irradiation with magnesium as the major metallic transmutant; the others include aluminum, beryllium and phosphorus in addition to helium and hydrogen gaseous species. Calculations by Sawan et al. predict that at a dose of ~100 dpa (displacements per atom), there is ~0.5 at.% Mg generated in SiC. The impact of these transmutants on SiC structural stability is currently unknown. This study uses ion implantation to introduce Mg into SiC. Multiaxial ion-channeling analysis of the as-produced damage state indicates a lower dechanneling yield observed along the <100> axis. The microstructure of the annealed sample was examined using high-resolution scanning transmission electron microscopy. The results show a high concentration of likely non-faulted tetrahedral voids and possible stacking fault tetrahedra near the damage peak. In addition to lattice distortion, dislocations and intrinsic and extrinsic stacking faults are also observed. Magnesium in 3C–SiC prefers to substitute for Si and it forms precipitates of cubic Mg2Si and tetragonal MgC2. The diffusion coefficient of Mg in 3C–SiC single crystal at 1573 K has been determined to be 3.8 ± 0.4E-19 m2/s.

  7. Enhanced Sintering of Boron Carbide-Silicon Composites by Silicon

    Science.gov (United States)

    Zeng, Xiaojun; Liu, Weiliang

    2016-09-01

    Boron carbide (B4C)-silicon (Si) composites have been prepared by aqueous tape casting, laminating, and spark plasma sintering (SPS). The influences of silicon (Si) content on the phases, microstructure, sintering properties, and mechanical properties of the obtained B4C-Si composites are studied. The results indicate that the addition of Si powder can act as a sintering aid and contribute to the sintering densification. The addition of Si powder can also act as a second phase and contribute to the toughening for composites. The relative density of B4C-Si composites samples with adding 10 wt.% Si powder prepared by SPS at 1600 °C and 50 MPa for 8 min is up to 98.3%. The bending strength, fracture toughness, and Vickers hardness of the sintered samples are 518.5 MPa, 5.87 MPa m1/2, and 38.9 GPa, respectively. The testing temperature-dependent high-temperature bending strength and fracture toughness can reach a maximum value at 1350 °C. The B4C-Si composites prepared at 1600, 1650, and 1700 °C have good high-temperature mechanical properties. This paper provides a facile low-temperature sintering route for B4C ceramics with improved properties.

  8. Silicon Carbide Diodes Performance Characterization and Comparison With Silicon Devices

    Science.gov (United States)

    Lebron-Velilla, Ramon C.; Schwarze, Gene E.; Trapp, Scott

    2003-01-01

    Commercially available silicon carbide (SiC) Schottky diodes from different manufacturers were electrically tested and characterized at room temperature. Performed electrical tests include steady state forward and reverse I-V curves, as well as switching transient tests performed with the diodes operating in a hard switch dc-to-dc buck converter. The same tests were performed in current state of the art silicon (Si) and gallium arsenide (GaAs) Schottky and pn junction devices for evaluation and comparison purposes. The SiC devices tested have a voltage rating of 200, 300, and 600 V. The comparison parameters are forward voltage drop at rated current, reverse current at rated voltage and peak reverse recovery currents in the dc to dc converter. Test results show that steady state characteristics of the tested SiC devices are not superior to the best available Si Schottky and ultra fast pn junction devices. Transient tests reveal that the tested SiC Schottky devices exhibit superior transient behavior. This is more evident at the 300 and 600 V rating where SiC Schottky devices showed drastically lower reverse recovery currents than Si ultra fast pn diodes of similar rating.

  9. Enhanced Sintering of Boron Carbide-Silicon Composites by Silicon

    Science.gov (United States)

    Zeng, Xiaojun; Liu, Weiliang

    2016-11-01

    Boron carbide (B4C)-silicon (Si) composites have been prepared by aqueous tape casting, laminating, and spark plasma sintering (SPS). The influences of silicon (Si) content on the phases, microstructure, sintering properties, and mechanical properties of the obtained B4C-Si composites are studied. The results indicate that the addition of Si powder can act as a sintering aid and contribute to the sintering densification. The addition of Si powder can also act as a second phase and contribute to the toughening for composites. The relative density of B4C-Si composites samples with adding 10 wt.% Si powder prepared by SPS at 1600 °C and 50 MPa for 8 min is up to 98.3%. The bending strength, fracture toughness, and Vickers hardness of the sintered samples are 518.5 MPa, 5.87 MPa m1/2, and 38.9 GPa, respectively. The testing temperature-dependent high-temperature bending strength and fracture toughness can reach a maximum value at 1350 °C. The B4C-Si composites prepared at 1600, 1650, and 1700 °C have good high-temperature mechanical properties. This paper provides a facile low-temperature sintering route for B4C ceramics with improved properties.

  10. Amorphous silicon carbide passivating layers for crystalline-silicon-based heterojunction solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Boccard, Mathieu; Holman, Zachary C. [School of Electrical, Computer, and Energy Engineering, Arizona State University, Tempe, Arizona 85287-5706 (United States)

    2015-08-14

    Amorphous silicon enables the fabrication of very high-efficiency crystalline-silicon-based solar cells due to its combination of excellent passivation of the crystalline silicon surface and permeability to electrical charges. Yet, amongst other limitations, the passivation it provides degrades upon high-temperature processes, limiting possible post-deposition fabrication possibilities (e.g., forcing the use of low-temperature silver pastes). We investigate the potential use of intrinsic amorphous silicon carbide passivating layers to sidestep this issue. The passivation obtained using device-relevant stacks of intrinsic amorphous silicon carbide with various carbon contents and doped amorphous silicon are evaluated, and their stability upon annealing assessed, amorphous silicon carbide being shown to surpass amorphous silicon for temperatures above 300 °C. We demonstrate open-circuit voltage values over 700 mV for complete cells, and an improved temperature stability for the open-circuit voltage. Transport of electrons and holes across the hetero-interface is studied with complete cells having amorphous silicon carbide either on the hole-extracting side or on the electron-extracting side, and a better transport of holes than of electrons is shown. Also, due to slightly improved transparency, complete solar cells using an amorphous silicon carbide passivation layer on the hole-collecting side are demonstrated to show slightly better performances even prior to annealing than obtained with a standard amorphous silicon layer.

  11. Optimum Design of Lightweight Silicon Carbide Mirror Assembly

    Institute of Scientific and Technical Information of China (English)

    HAN Yuanyuan; ZHANG Yumin; HAN Jiecai; ZHANG Jianhan; YAO Wang; ZHOU Yufeng

    2008-01-01

    According to the design requirement and on the basis of the principle that the thermal expansion coefficient of the support structure should match with that of the mirror, a lightweight silicon carbide primary mirror assembly was designed. Finite element analysis combined with the parameter-optimized method was used during the design. Lightweight cell and rigid rib structure were used for the mirror assembly. The static, dynamic and thermal properties of the primary mirror assembly were analyzed. It is shown that after optimization, the lightweight ratio of the silicon carbide mirror is 52.5%, and the rigidity of the silicon carbide structure is high enough to support the required mirror. When temperature changes, the deformation of the mirror surface is in proportion to the temperature difference.

  12. Implanted bottom gate for epitaxial graphene on silicon carbide

    Science.gov (United States)

    Waldmann, D.; Jobst, J.; Fromm, F.; Speck, F.; Seyller, T.; Krieger, M.; Weber, H. B.

    2012-04-01

    We present a technique to tune the charge density of epitaxial graphene via an electrostatic gate that is buried in the silicon carbide substrate. The result is a device in which graphene remains accessible for further manipulation or investigation. Via nitrogen or phosphor implantation into a silicon carbide wafer and subsequent graphene growth, devices can routinely be fabricated using standard semiconductor technology. We have optimized samples for room temperature as well as for cryogenic temperature operation. Depending on implantation dose and temperature we operate in two gating regimes. In the first, the gating mechanism is similar to a MOSFET, the second is based on a tuned space charge region of the silicon carbide semiconductor. We present a detailed model that describes the two gating regimes and the transition in between.

  13. Role of silicon dangling bonds in the electronic properties of epitaxial graphene on silicon carbide.

    Science.gov (United States)

    Ridene, Mohamed; Kha, Calvin S; Flipse, Cees F J

    2016-03-29

    In this paper, we study the electronic properties of epitaxial graphene (EG) on silicon carbide by means of ab initio calculations based on the local spin density approximation + U method taking into account the Coulomb interaction between Si localized electrons. We show that this interaction is not completely suppressed but is screened by carbon layers grown on-top of silicon carbide. This finding leads to a good qualitative understanding of the experimental results reported on EG on silicon carbide. Our results highlight the presence of the Si localized states and might explain the anomalous Hanle curve and the high values of spin relaxation time in EG.

  14. High-Q silicon carbide photonic-crystal cavities

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jonathan Y. [Department of Electrical and Computer Engineering, University of Rochester, Rochester, New York 14627 (United States); Lu, Xiyuan [Department of Physics and Astronomy, University of Rochester, Rochester, New York 14627 (United States); Lin, Qiang, E-mail: qiang.lin@rochester.edu [Department of Electrical and Computer Engineering, University of Rochester, Rochester, New York 14627 (United States); Institute of Optics, University of Rochester, Rochester, New York 14627 (United States)

    2015-01-26

    We demonstrate one-dimensional photonic-crystal nanobeam cavities in amorphous silicon carbide. The fundamental mode exhibits intrinsic optical quality factor as high as 7.69 × 10{sup 4} with mode volume ∼0.60(λ/n){sup 3} at wavelength 1.5 μm. A corresponding Purcell factor value of ∼10{sup 4} is the highest reported to date in silicon carbide optical cavities. The device exhibits great potential for integrated nonlinear photonics and cavity nano-optomechanics.

  15. Ultrathin fiber poly-3-hydroxybutyrate, modified by silicon carbide nanoparticles

    Science.gov (United States)

    Olkhov, A. A.; Krutikova, A. A.; Goldshtrakh, M. A.; Staroverova, O. V.; Iordanskii, A. L.; Ischenko, A. A.

    2016-11-01

    The article presents the results of studies the composite fibrous material based on poly-3-hydroxybutyrate (PHB) and nano-size silicon carbide obtained by the electrospinning method. Size distribution of the silicon carbide nanoparticles in the fiber was estimated by X-ray diffraction technique. It is shown that immobilization of the SiC nanoparticles to the PHB fibers contributes to obtaining essentially smaller diameter of fibers, high physical-mechanical characteristics and increasing resistance to degradation in comparison with the fibers of PHB.

  16. Solar silicon from directional solidification of MG silicon produced via the silicon carbide route

    Science.gov (United States)

    Rustioni, M.; Margadonna, D.; Pirazzi, R.; Pizzini, S.

    1986-01-01

    A process of metallurgical grade (MG) silicon production is presented which appears particularly suitable for photovoltaic (PV) applications. The MG silicon is prepared in a 240 KVA, three electrode submerged arc furnace, starting from high grade quartz and high purity silicon carbide. The silicon smelted from the arc furnace was shown to be sufficiently pure to be directionally solidified to 10 to 15 kg. After grinding and acid leaching, had a material yield larger than 90%. With a MG silicon feedstock containing 3 ppmw B, 290 ppmw Fe, 190 ppmw Ti, and 170 ppmw Al, blended with 50% of off grade electronic grade (EG) silicon to reconduct the boron content to a concentration acceptable for solar cell fabrication, the 99% of deep level impurities were concentrated in the last 5% of the ingot. Quite remarkably this material has OCV values higher tham 540 mV and no appreciable shorts due to SiC particles.

  17. The Active Oxidation of Silicon Carbide

    Science.gov (United States)

    Jacobson, Nathan S.; Myers, Dwight L.

    2009-01-01

    The high temperature oxidation of silicon carbide occurs in two very different modes. Passive oxidation forms a protective oxide film which limits further attack of the SiC: SiC(s) + 3/2 O2(g) = SiO2(s) + CO(g) Active oxidation forms a volatile oxide and may lead to extensive attack of the SiC: SiC(s) + O2(g) = SiO(g) + CO(g) Generally passive oxidation occurs at higher oxidant pressures and active oxidation occurs at lower oxidant pressures and elevated temperatures. Active oxidation is a concern for reentry, where the flight trajectory involves the latter conditions. Thus the transition points and rates of active oxidation are a major concern. Passive/active transitions have been studied by a number of investigators. An examination of the literature indicates many questions remain regarding the effect of impurity, the hysteresis of the transition (i.e. the difference between active-to-passive and passive-toactive), and the effect of total pressure. In this study we systematically investigate each of these effects. Experiments were done in both an alumina furnace tube and a quartz furnace tube. It is known that alumina tubes release impurities such as sodium and increase the kinetics in the passive region [1]. We have observed that the active-to-passive transition occurs at a lower oxygen pressure when the experiment is conducted in alumina tubes and the resultant passive silica scale contains sodium. Thus the tests in this study are conducted in quartz tubes. The hysteresis of the transition has been discussed in the detail in the original theoretical treatise of this problem for pure silicon by Wagner [2], yet there is little mention of it in subsequent literature. Essentially Wagner points out that the active-to-passive transition is governed by the criterion for a stable Si/SiO2 equilibria and the passive-to-active transition is governed by the decomposition of the SiO2 film. A series of experiments were conducted for active-to-passive and passive

  18. Sputtering and codeposition of silicon carbide with deuterium

    Science.gov (United States)

    Causey, Rion A.

    2003-03-01

    Due to its excellent thermal properties, silicon carbide is being considered as a possible plasma-facing material for fusion devices. If used as a plasma-facing material, the energetic hydrogen isotope ions and charge-exchanged neutrals escaping from the plasma will sputter the silicon carbide. To assess the tritium inventory problems that will be generated by the use of this material, it is necessary that we know the codeposition properties of the redeposited silicon carbide. To determine the codeposition properties, the deuterium plasma experiment at Sandia National Laboratories in Livermore, California has been used to directly compare the deuterium sputtering and codeposition of silicon carbide with that of graphite. A Penning discharge at a flux of 6×10 19 D/m 2 and an energy of ≈300 eV was used to sputter silicon and carbon from a pair of 0.05 m diameter silicon carbide disks. The removal rate of deuterium gas from the fixed volume of the system isolated from all other sources and sinks was used to measure the codeposition probability (probability that a hydrogen isotope atom will be removed through codeposition per ion striking the sample surface). A small catcher plate used to capture a fraction of the codeposited film was analyzed using Auger spectroscopy. This analysis showed the film to begin with a high carbon to silicon ratio due to preferential sputtering of the carbon. As the film became thicker, the ratio of the depositing material changed over to the (1:1) value that must eventually be attained.

  19. Synthesis of silicon carbide from cokes rice hulls and coked bamboos; Shirasu to momigaratan chikutan kara SiC no gosei

    Energy Technology Data Exchange (ETDEWEB)

    Tateyama, H.; Kimura, K.; Jinnai, K. [Kyushu National Industrial Research Institute, Sagas (Japan); Hamasaki, H.

    1995-07-25

    Silicon carbide is an important industrial material as used for high-temperature ceramics. In the pre-sent study silicon carbide powders were synthesized at different temperature (1,250-1,400{degree}C) by reaction of a mixed power of shirasu and caked rice hulls or caked bamboos. The results are summarized as follows; (1) Two kinds of shirasu are used as the source of SiO2, one mainly consists of volcanic glass and the other includes volcanic glass and crystalline materials, such as feldspar and quartz. Coked rice hulls contain large amounts of unburnt component, but caked bamboos include a very small amount of one. (2) Pure powders of silicon carbide are synthesized from shirasu and caked bamboos under relatively low temperature as compared with synthetic conditions of {beta}-silicon carbide on the market. (3) The structural and quantitative analyses of the synthesized silicon carbide were carried out using the X-ray powder diffraction refinement method on the basis of the cubic and hexagonal close packed models. The profile calculated on the basis of Paterson model shows that the peak of (102) reflection moves toward the lower angle with increasing the amount of stacking faults, however, in the case of t Wilson model the peak position of (102) reflection does not move any more with increasing the stacking faults. The content of the stacking faults in the present synthesized silicon carbide is very small as compared with that of silicon carbide on the sail. 5 refs., 10 figs.

  20. Scalable Quantum Photonics with Single Color Centers in Silicon Carbide.

    Science.gov (United States)

    Radulaski, Marina; Widmann, Matthias; Niethammer, Matthias; Zhang, Jingyuan Linda; Lee, Sang-Yun; Rendler, Torsten; Lagoudakis, Konstantinos G; Son, Nguyen Tien; Janzén, Erik; Ohshima, Takeshi; Wrachtrup, Jörg; Vučković, Jelena

    2017-02-24

    Silicon carbide is a promising platform for single photon sources, quantum bits (qubits), and nanoscale sensors based on individual color centers. Toward this goal, we develop a scalable array of nanopillars incorporating single silicon vacancy centers in 4H-SiC, readily available for efficient interfacing with free-space objective and lensed-fibers. A commercially obtained substrate is irradiated with 2 MeV electron beams to create vacancies. Subsequent lithographic process forms 800 nm tall nanopillars with 400-1400 nm diameters. We obtain high collection efficiency of up to 22 kcounts/s optical saturation rates from a single silicon vacancy center while preserving the single photon emission and the optically induced electron-spin polarization properties. Our study demonstrates silicon carbide as a readily available platform for scalable quantum photonics architecture relying on single photon sources and qubits.

  1. Laser-induced phase separation of silicon carbide

    Science.gov (United States)

    Choi, Insung; Jeong, Hu Young; Shin, Hyeyoung; Kang, Gyeongwon; Byun, Myunghwan; Kim, Hyungjun; Chitu, Adrian M.; Im, James S.; Ruoff, Rodney S.; Choi, Sung-Yool; Lee, Keon Jae

    2016-11-01

    Understanding the phase separation mechanism of solid-state binary compounds induced by laser-material interaction is a challenge because of the complexity of the compound materials and short processing times. Here we present xenon chloride excimer laser-induced melt-mediated phase separation and surface reconstruction of single-crystal silicon carbide and study this process by high-resolution transmission electron microscopy and a time-resolved reflectance method. A single-pulse laser irradiation triggers melting of the silicon carbide surface, resulting in a phase separation into a disordered carbon layer with partially graphitic domains (~2.5 nm) and polycrystalline silicon (~5 nm). Additional pulse irradiations cause sublimation of only the separated silicon element and subsequent transformation of the disordered carbon layer into multilayer graphene. The results demonstrate viability of synthesizing ultra-thin nanomaterials by the decomposition of a binary system.

  2. Sintering of nano crystalline silicon carbide by doping with boron carbide

    Indian Academy of Sciences (India)

    M S Datta; A K Bandyopadhyay; B Chaudhuri

    2002-06-01

    Sinterable nano silicon carbide powders of mean particle size (37 nm) were prepared by attrition milling and chemical processing of an acheson type alpha silicon carbide having mean particle size of 0.39 m (390 nm). Pressureless sintering of these powders was achieved by addition of boron carbide of 0.5 wt% together with carbon of 1 wt% at 2050°C at vacuum (3 mbar) for 15 min. Nearly 99% sintered density was obtained. The mechanism of sintering was studied by scanning electron microscopy and transmission electron microscopy. This study shows that the mechanism is a solid-state sintering process. Polytype transformation from 6H to 4H was observed.

  3. PECVD silicon carbide surface micromachining technology and selected MEMS applications

    NARCIS (Netherlands)

    Rajaraman, V.; Pakula, L.S.; Yang, H.; French, P.J.; Sarro, P.M.

    2011-01-01

    Attractive material properties of plasma enhanced chemical vapour deposited (PECVD) silicon carbide (SiC) when combined with CMOS-compatible low thermal budget processing provides an ideal technology platform for developing various microelectromechanical systems (MEMS) devices and merging them with

  4. Silicon carbide and other films and method of deposition

    Science.gov (United States)

    Mehregany, Mehran (Inventor); Zorman, Christian A. (Inventor); Fu, Xiao-An (Inventor); Dunning, Jeremy (Inventor)

    2011-01-01

    A method of depositing a ceramic film, particularly a silicon carbide film, on a substrate is disclosed in which the residual stress, residual stress gradient, and resistivity are controlled. Also disclosed are substrates having a deposited film with these controlled properties and devices, particularly MEMS and NEMS devices, having substrates with films having these properties.

  5. Design and Fabrication of Silicon Carbide Semiconductor Detectors

    Institute of Scientific and Technical Information of China (English)

    MENG; Xin; LIU; Yang; HE; Gao-kui

    2015-01-01

    The potential of silicon carbide(SiC)for use in semiconductor nuclear radiation detectors has been recognized for years.SiC detectors have now been demonstrated for high-resolution alpha particle and X-ray energy spectrometry,beta ray,gamma-ray,thermal-and fast-neutron

  6. PECVD silicon carbide surface micromachining technology and selected MEMS applications

    NARCIS (Netherlands)

    Rajaraman, V.; Pakula, L.S.; Yang, H.; French, P.J.; Sarro, P.M.

    2011-01-01

    Attractive material properties of plasma enhanced chemical vapour deposited (PECVD) silicon carbide (SiC) when combined with CMOS-compatible low thermal budget processing provides an ideal technology platform for developing various microelectromechanical systems (MEMS) devices and merging them with

  7. Influence of nanometric silicon carbide on phenolic resin composites properties

    Indian Academy of Sciences (India)

    GEORGE PELIN; CRISTINA-ELISABETA PELIN; ADRIANA STEFAN; ION DINC\\u{A}; ANTON FICAI; ECATERINA ANDRONESCU; ROXANA TRUSC\\u{A}

    2016-06-01

    This paper presents a preliminary study on obtaining and characterization of phenolic resin-based composites modified with nanometric silicon carbide. The nanocomposites were prepared by incorporating nanometric silicon carbide (nSiC) into phenolic resin at 0.5, 1 and 2 wt% contents using ultrasonication to ensure uniform dispersion of the nanopowder, followed by heat curing of the phenolic-based materials at controlled temperature profile up to 120$^{\\circ}$C. The obtained nanocomposites were characterized by FTIR spectroscopy and scanning electron microscopy analysis and evaluated in terms of mechanical, tribological and thermal stability under load. The results highlight the positive effect of the nanometric silicon carbide addition in phenolic resin on mechanical, thermo-mechanical and tribological performance, improving their strength, stiffness and abrasive properties. The best results were obtained for 1 wt% nSiC, proving that this value is the optimum nanometric silicon carbide content. The results indicate that these materials could be effectively used to obtain ablative or carbon–carbon composites in future studies.

  8. Mullite Coating on Recrytallized Silicon Carbide and Its Cycling Oxidation Behavior

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Mullite coating on recrystallized silicon carbide was successfully prepared by the sol-gel route. The cycling oxidation of coated recrystallized silicon carbide was performed at 1500℃. For comparison, the oxidation of uncoated recrystallized silicon carbide was also carried out at the same condition. The results indicated that a layer of compact, adhesive and crack free mullite coating was found on the recrystallized silicon carbide. After oxidation, the new coatings exhibit adherence and crack resistance under thermal cycling between room temperature and 1500℃, therefore the oxidation resistance capability of silicon carbide was enhanced. With the increase of the dipping frequencies, namely, the increase of the thickness of mullite coating, the oxidation resistance of silicon carbide would be further improved. The formation mechanism of mullite coating was analyzed and discussed and the oxidation dynamics model of coatedmullite silicon carbide has been also proposed.

  9. Evidence for a silicon oxycarbide phase in the Nicalon silicon carbide fibre

    Energy Technology Data Exchange (ETDEWEB)

    Porte, L.; Sartre, A.

    1989-01-01

    The Nicalon silicon carbide fibre has been studied by X-ray photoelectron spectroscopy. Elements entering the fiber are carbon, silicon and oxygen. In addition to previously reported chemical entities (silicon carbide, silica and graphitic carbon) evidence is found of the presence of a new supplementary phase which is attributed to an intermediate silicon oxycarbide phase. As this phase is found to participate in very appreciable proportions to the composition of the fiber, some influence on the properties of this fiber can be anticipated. 17 references.

  10. Analytical and experimental evaluation of joining silicon carbide to silicon carbide and silicon nitride to silicon nitride for advanced heat engine applications Phase 2. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, G.J.; Vartabedian, A.M.; Wade, J.A.; White, C.S. [Norton Co., Northboro, MA (United States). Advanced Ceramics Div.

    1994-10-01

    The purpose of joining, Phase 2 was to develop joining technologies for HIP`ed Si{sub 3}N{sub 4} with 4wt% Y{sub 2}O{sub 3} (NCX-5101) and for a siliconized SiC (NT230) for various geometries including: butt joins, curved joins and shaft to disk joins. In addition, more extensive mechanical characterization of silicon nitride joins to enhance the predictive capabilities of the analytical/numerical models for structural components in advanced heat engines was provided. Mechanical evaluation were performed by: flexure strength at 22 C and 1,370 C, stress rupture at 1,370 C, high temperature creep, 22 C tensile testing and spin tests. While the silicon nitride joins were produced with sufficient integrity for many applications, the lower join strength would limit its use in the more severe structural applications. Thus, the silicon carbide join quality was deemed unsatisfactory to advance to more complex, curved geometries. The silicon carbide joining methods covered within this contract, although not entirely successful, have emphasized the need to focus future efforts upon ways to obtain a homogeneous, well sintered parent/join interface prior to siliconization. In conclusion, the improved definition of the silicon carbide joining problem obtained by efforts during this contract have provided avenues for future work that could successfully obtain heat engine quality joins.

  11. Surface and Internal Structure of Pristine Presolar Silicon Carbide

    Science.gov (United States)

    Stroud, Rhonda, M.; Bernatowicz, Thomas J.

    2005-01-01

    Silicon carbide is the most well-studied type of presolar grain. Isotope measurements of thousands [1,2] and structural data from over 500 individual grains have been reported [3]. The isotope data indicate that approximately 98% originated in asymptotic giant branch stars and 2% in supernovae. Although tens of different polytypes of SiC are known to form synthetically, only two polytypes have been reported for presolar grains. Daulton et al. [3] found that for SiC grains isolated from Murchison by acid treatments, 79.4% are 3C cubic beta-SiC, 2.7% are 2H hexagonal alpha-SiC, 17.1% are intergrowths of and , and 0.9% are heavily disordered. They report that the occurrence of only the and polytypes is consistent with the observed range of condensation temperatures of circumstellar dust for carbon stars. Further constraint on the formation and subsequent alteration of the grains can be obtained from studies of the surfaces and interior structure of grains in pristine form, i.e., prepared without acid treatments [4,5]. The acid treatments remove surface coatings, produce etch pits around defect sites and could remove some subgrains. Surface oxides have been predicted by theoretical modeling as a survival mechanism for SiC grains exposed to the hot oxidizing solar nebula [6]. Scanning electron microscopy studies of pristine SiC shows some evidence for the existence of oxide and organic coatings [4]. We report herein on transmission electron microscopy studies of the surface and internal structure of two pristine SiC grains, including definitive evidence of an oxide rim on one grain, and the presence of internal TiC and AlN grains.

  12. Hardness and thermal stability of cubic silicon nitride

    DEFF Research Database (Denmark)

    Jiang, Jianzhong; Kragh, Flemming; Frost, D. J.

    2001-01-01

    The hardness and thermal stability of cubic spinel silicon nitride (c-Si3N4), synthesized under high-pressure and high-temperature conditions, have been studied by microindentation measurements, and x-ray powder diffraction and scanning electron microscopy, respectively The phase at ambient...... temperature has an average hardness of 35.31 GPa, slightly larger than SiO2 stishovite, which is often referred to as the third hardest material after diamond and cubic boron nitride. The cubic phase is stable up to 1673 K in air. At 1873 K, alpha -and beta -Si3N4 phases are observed, indicating a phase...... transformation sequence of c-to-alpha -to-beta -Si3N4 phases....

  13. Protective coating for alumina-silicon carbide whisker composites

    Science.gov (United States)

    Tiegs, Terry N.

    1989-01-01

    Ceramic composites formed of an alumina matrix reinforced with silicon carbide whiskers homogenously dispersed therein are provided with a protective coating for preventing fracture strength degradation of the composite by oxidation during exposure to high temperatures in oxygen-containing atmospheres. The coating prevents oxidation of the silicon carbide whiskers within the matrix by sealing off the exterior of the matrix so as to prevent oxygen transport into the interior of the matrix. The coating is formed of mullite or mullite plus silicon oxide and alumina and is formed in place by heating the composite in air to a temperature greater than 1200.degree. C. This coating is less than about 100 microns thick and adequately protects the underlying composite from fracture strength degradation due to oxidation.

  14. SILICON CARBIDE CERAMICS FOR COMPACT HEAT EXCHANGERS

    Energy Technology Data Exchange (ETDEWEB)

    DR. DENNIS NAGLE; DR. DAJIE ZHANG

    2009-03-26

    Silicon carbide (SiC) materials are prime candidates for high temperature heat exchangers for next generation nuclear reactors due to their refractory nature and high thermal conductivity at elevated temperatures. This research has focused on demonstrating the potential of liquid silicon infiltration (LSI) for making SiC to achieve this goal. The major advantage of this method over other ceramic processing techniques is the enhanced capability of making high dense, high purity SiC materials in complex net shapes. For successful formation of net shape SiC using LSI techniques, the carbon preform reactivity and pore structure must be controlled to allow the complete infiltration of the porous carbon structure which allows complete conversion of the carbon to SiC. We have established a procedure for achieving desirable carbon properties by using carbon precursors consisting of two readily available high purity organic materials, crystalline cellulose and phenolic resin. Phenolic resin yields a glassy carbon with low chemical reactivity and porosity while the cellulose carbon is highly reactive and porous. By adjusting the ratio of these two materials in the precursor mixtures, the properties of the carbons produced can be controlled. We have identified the most favorable carbon precursor composition to be a cellulose resin mass ratio of 6:4 for LSI formation of SiC. The optimum reaction conditions are a temperature of 1800 C, a pressure of 0.5 Torr of argon, and a time of 120 minutes. The fully dense net shape SiC material produced has a density of 2.96 g cm{sup -3} (about 92% of pure SiC) and a SiC volume fraction of over 0.82. Kinetics of the LSI SiC formation process was studied by optical microscopy and quantitative digital image analysis. This study identified six reaction stages and provided important understanding of the process. Although the thermal conductivity of pure SiC at elevated temperatures is very high, thermal conductivities of most commercial Si

  15. SILICON CARBIDE CERAMICS FOR COMPACT HEAT EXCHANGERS

    Energy Technology Data Exchange (ETDEWEB)

    DR. DENNIS NAGLE; DR. DAJIE ZHANG

    2009-03-26

    Silicon carbide (SiC) materials are prime candidates for high temperature heat exchangers for next generation nuclear reactors due to their refractory nature and high thermal conductivity at elevated temperatures. This research has focused on demonstrating the potential of liquid silicon infiltration (LSI) for making SiC to achieve this goal. The major advantage of this method over other ceramic processing techniques is the enhanced capability of making high dense, high purity SiC materials in complex net shapes. For successful formation of net shape SiC using LSI techniques, the carbon preform reactivity and pore structure must be controlled to allow the complete infiltration of the porous carbon structure which allows complete conversion of the carbon to SiC. We have established a procedure for achieving desirable carbon properties by using carbon precursors consisting of two readily available high purity organic materials, crystalline cellulose and phenolic resin. Phenolic resin yields a glassy carbon with low chemical reactivity and porosity while the cellulose carbon is highly reactive and porous. By adjusting the ratio of these two materials in the precursor mixtures, the properties of the carbons produced can be controlled. We have identified the most favorable carbon precursor composition to be a cellulose resin mass ratio of 6:4 for LSI formation of SiC. The optimum reaction conditions are a temperature of 1800 C, a pressure of 0.5 Torr of argon, and a time of 120 minutes. The fully dense net shape SiC material produced has a density of 2.96 g cm{sup -3} (about 92% of pure SiC) and a SiC volume fraction of over 0.82. Kinetics of the LSI SiC formation process was studied by optical microscopy and quantitative digital image analysis. This study identified six reaction stages and provided important understanding of the process. Although the thermal conductivity of pure SiC at elevated temperatures is very high, thermal conductivities of most commercial Si

  16. Growth of silicon carbide crystals on a seed while pulling silicon crystals from a melt

    Science.gov (United States)

    Ciszek, T. F.; Schwuttke, G. H. (Inventor)

    1979-01-01

    A saturated solution of silicon and an element such as carbon having a segregation coefficient less than unity is formed by placing a solid piece of carbon in a body of molten silicon having a temperature differential decreasing toward the surface. A silicon carbide seed crystal is disposed on a holder beneath the surface of the molten silicon. As a rod or ribbon of silicon is slowly pulled from the melt, a supersaturated solution of carbon in silicon is formed in the vicinity of the seed crystal. Excess carbon is emitted from the solution in the form of silicon carbide which crystallizes on the seed crystal held in the cool region of the melt.

  17. STATUS OF HIGH FLUX ISOTOPE REACTOR IRRADIATION OF SILICON CARBIDE/SILICON CARBIDE JOINTS

    Energy Technology Data Exchange (ETDEWEB)

    Katoh, Yutai [ORNL; Koyanagi, Takaaki [ORNL; Kiggans, Jim [ORNL; Cetiner, Nesrin [ORNL; McDuffee, Joel [ORNL

    2014-09-01

    Development of silicon carbide (SiC) joints that retain adequate structural and functional properties in the anticipated service conditions is a critical milestone toward establishment of advanced SiC composite technology for the accident-tolerant light water reactor (LWR) fuels and core structures. Neutron irradiation is among the most critical factors that define the harsh service condition of LWR fuel during the normal operation. The overarching goal of the present joining and irradiation studies is to establish technologies for joining SiC-based materials for use as the LWR fuel cladding. The purpose of this work is to fabricate SiC joint specimens, characterize those joints in an unirradiated condition, and prepare rabbit capsules for neutron irradiation study on the fabricated specimens in the High Flux Isotope Reactor (HFIR). Torsional shear test specimens of chemically vapor-deposited SiC were prepared by seven different joining methods either at Oak Ridge National Laboratory or by industrial partners. The joint test specimens were characterized for shear strength and microstructures in an unirradiated condition. Rabbit irradiation capsules were designed and fabricated for neutron irradiation of these joint specimens at an LWR-relevant temperature. These rabbit capsules, already started irradiation in HFIR, are scheduled to complete irradiation to an LWR-relevant dose level in early 2015.

  18. In Situ Synthesis of Uranium Carbide and its High Temperature Cubic Phase

    Energy Technology Data Exchange (ETDEWEB)

    Reiche, Helmut Matthias [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vogel, Sven C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-03-25

    New in situ data for the U-C system are presented, with the goal of improving knowledge of the phase diagram to enable production of new ceramic fuels. The none quenchable, cubic, δ-phase, which in turn is fundamental to computational methods, was identified. Rich datasets of the formation synthesis of uranium carbide yield kinetics data which allow the benchmarking of modeling, thermodynamic parameters etc. The order-disorder transition (carbon sublattice melting) was observed due to equal sensitivity of neutrons to both elements. This dynamic has not been accurately described in some recent simulation-based publications.

  19. Effect of carbon concentration on changing the morphology of titanium carbide nanoparticles from cubic to cuboctahedron.

    Science.gov (United States)

    Grove, David E; Gupta, Ujjwal; Castleman, A W

    2010-01-26

    Titanium carbide nanoparticles were synthesized by flowing methane through a plasma generated from an arc discharge between two titanium electrodes. Different methane concentrations were employed in studies made to investigate the effects of carbon concentration on particle morphology. Transmission electron microscopy and X-ray diffraction were used to investigate the synthesized TiC nanopowders, whereupon it was found that nanocrystalline TiC nanoparticles prefer a cubic morphology at low concentrations of methane and a cuboctahedron morphology at high concentration of methane. The change in particle morphology is attributed to carbon affecting the relative growth rates of the {111} and {100} facets on a TiC seed crystal.

  20. Silicon carbide high performance optics: a cost-effective, flexible fabrication process

    Science.gov (United States)

    Casstevens, John M.; Rashed, Abuagela; Plummer, Ronald; Bray, Don; Gates, Rob L.; Lara-Curzio, Edgar; Ferber, Matt K.; Kirkland, Tim

    2001-12-01

    Silicon carbide may well be the best known material for the manufacture of high performance optical components. This material offers many advantages over glasses and metals that have historically been used in high performance optical systems. A combination of extremely high specific stiffness (E/r), high thermal conductivity and outstanding dimensional stability make silicon carbide superior overall to beryllium and low-expansion glass ceramics. A major impediment to wide use of silicon carbide in optical systems has been the cost associated with preliminary shaping and final finishing of silicon carbide. Because silicon carbide is an extremely hard and strong material, precision machining can only be done with expensive diamond tooling on very stiff high quality machine tools. Near-net-shape slip casting of silicon carbide can greatly reduce the cost of silicon carbide mirror substrates but this process still requires significant diamond grinding of the cast components. The process described here begins by machining the component from all special type of graphite. This graphite can rapidly be machined with conventional multi-axis CNC machine tools to achieve any level of complexity and lightweighting required. The graphite is then directly converted completely to silicon carbide with very small and very predictable dimensional change. After conversion to silicon carbide the optical surface is coated with very fine grain CVD silicon carbide which is easily polished to extreme smoothness. Details of the fabrication process are described and photos and performance specifications of an eight-inch elliptical demonstration mirror are provided.

  1. Analytical and Experimental Evaluation of Joining Silicon Carbide to Silicon Carbide and Silicon Nitride to Silicon Nitride for Advanced Heat Engine Applications Phase II

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, G.J.

    1994-01-01

    Techniques were developed to produce reliable silicon nitride to silicon nitride (NCX-5101) curved joins which were used to manufacture spin test specimens as a proof of concept to simulate parts such as a simple rotor. Specimens were machined from the curved joins to measure the following properties of the join interlayer: tensile strength, shear strength, 22 C flexure strength and 1370 C flexure strength. In parallel, extensive silicon nitride tensile creep evaluation of planar butt joins provided a sufficient data base to develop models with accurate predictive capability for different geometries. Analytical models applied satisfactorily to the silicon nitride joins were Norton's Law for creep strain, a modified Norton's Law internal variable model and the Monkman-Grant relationship for failure modeling. The Theta Projection method was less successful. Attempts were also made to develop planar butt joins of siliconized silicon carbide (NT230).

  2. Revised activation estimates for silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Heinisch, H.L. [Pacific Northwest National Lab., Richland, WA (United States); Cheng, E.T.; Mann, F.M.

    1996-10-01

    Recent progress in nuclear data development for fusion energy systems includes a reevaluation of neutron activation cross sections for silicon and aluminum. Activation calculations using the newly compiled Fusion Evaluated Nuclear Data Library result in calculated levels of {sup 26}Al in irradiated silicon that are about an order of magnitude lower than the earlier calculated values. Thus, according to the latest internationally accepted nuclear data, SiC is much more attractive as a low activation material, even in first wall applications.

  3. Anisotropy of the solid-state epitaxy of silicon carbide in silicon

    Energy Technology Data Exchange (ETDEWEB)

    Kukushkin, S. A., E-mail: kukushkin_s@yahoo.com; Osipov, A. V. [Russian Academy of Sciences, Institute of Problems of Machine Science (Russian Federation)

    2013-12-15

    A new method for the solid-state synthesis of epitaxial layers is developed, in which a substrate participates in the chemical reaction and the reaction product grows not on the substrate surface, as in traditional epitaxial methods, but inside the substrate. This method offers new opportunities for elastic-energy relaxation due to a mechanism operating only in anisotropic media, specifically, the attraction of point defects formed during the chemical reaction. The attracting point centers of dilatation form relatively stable objects, dilatation dipoles, which significantly reduce the total elastic energy. It is shown that, in crystals with cubic symmetry, the most favorable arrangement of dipoles is the 〈111〉 direction. The theory is tested by growing silicon carbide (SiC) films on Si (111) substrates by chemical reaction with carbon monoxide CO. High-quality single-crystal SiC-4H films with thicknesses of up to 100 nm are grown on Si (111). Ellipsometric analysis showed that the optical constants of the SiC-4H films are significantly anisotropic. This is caused not only by the lattice hexagonality but also by a small amount (about 2–6%) of carbon atoms remaining in the film due to dilatation dipoles. It is shown that the optical constants of the carbon impurity correspond to strongly anisotropic highly oriented pyrolytic graphite.

  4. Novel fabrication of silicon carbide based ceramics for nuclear applications

    Science.gov (United States)

    Singh, Abhishek Kumar

    Advances in nuclear reactor technology and the use of gas-cooled fast reactors require the development of new materials that can operate at the higher temperatures expected in these systems. These materials include refractory alloys based on Nb, Zr, Ta, Mo, W, and Re; ceramics and composites such as SiC--SiCf; carbon--carbon composites; and advanced coatings. Besides the ability to handle higher expected temperatures, effective heat transfer between reactor components is necessary for improved efficiency. Improving thermal conductivity of the fuel can lower the center-line temperature and, thereby, enhance power production capabilities and reduce the risk of premature fuel pellet failure. Crystalline silicon carbide has superior characteristics as a structural material from the viewpoint of its thermal and mechanical properties, thermal shock resistance, chemical stability, and low radioactivation. Therefore, there have been many efforts to develop SiC based composites in various forms for use in advanced energy systems. In recent years, with the development of high yield preceramic precursors, the polymer infiltration and pyrolysis (PIP) method has aroused interest for the fabrication of ceramic based materials, for various applications ranging from disc brakes to nuclear reactor fuels. The pyrolysis of preceramic polymers allow new types of ceramic materials to be processed at relatively low temperatures. The raw materials are element-organic polymers whose composition and architecture can be tailored and varied. The primary focus of this study is to use a pyrolysis based process to fabricate a host of novel silicon carbide-metal carbide or oxide composites, and to synthesize new materials based on mixed-metal silicocarbides that cannot be processed using conventional techniques. Allylhydridopolycarbosilane (AHPCS), which is an organometal polymer, was used as the precursor for silicon carbide. Inert gas pyrolysis of AHPCS produces near-stoichiometric amorphous

  5. Electronic transport properties of the armchair silicon carbide nanotube

    Energy Technology Data Exchange (ETDEWEB)

    Song Jiuxu; Yang Yintang; Liu Hongxia [Key Laboratory of Ministry of Education for Wide Band Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China); Guo Lixin [School of Science, Xidian University, Xi' an 710071 (China); Zhang Zhiyong, E-mail: songjiuxu@126.com [Information Science and Technology Institution, Northwest University, Xi' an 710069 (China)

    2010-11-15

    The electronic transport properties of the armchair silicon carbide nanotube (SiCNT) are investigated by using the combined nonequilibrium Green's function method with density functional theory. In the equilibrium transmission spectrum of the nanotube, a transmission valley of about 2.12 eV is discovered around Fermi energy, which means that the nanotube is a wide band gap semiconductor and consistent with results of first principle calculations. More important, negative differential resistance is found in its current voltage characteristic. This phenomenon originates from the variation of density of states caused by applied bias voltage. These investigations are meaningful to modeling and simulation in silicon carbide nanotube electronic devices.

  6. Preferential killing of cancer cells using silicon carbide quantum dots.

    Science.gov (United States)

    Mognetti, Barbara; Barberis, Alessandro; Marino, Silvia; Di Carlo, Francesco; Lysenko, Vladimir; Marty, Olivier; Géloën, Alain

    2010-12-01

    Silicon carbide quantum dots are highly luminescent biocompatible nanoparticles whose properties might be of particular interest for biomedical applications. In this study we investigated Silicon Carbide Quantum Dots (3C-SiC QDs) cellular localisation and influence on viability and proliferation on oral squamous carcinoma (AT-84 and HSC) and immortalized cell lines (S-G). They clearly localize into the nuclei, but the presence of 3C-SiC QDs in culture medium provoke morphological changes in cultured cells. We demonstrate that 3C-SiC QDs display dose- and time-dependent selective cytotoxicity on cancer versus immortalized cells in vitro. Since one of the limitations of classical antineoplastic drugs is their lack of selectivity, these results open a new way in the search for antiproliferative drugs.

  7. Wide-Pulse Evaluation of 0.5 CM2 Silicon Carbide SGTO

    Science.gov (United States)

    2009-06-01

    Silicon carbide Super-GTOs are being pursued by the Army as a replacement for current silicon-based, high-power pulse switches. In this study, 0.5...cm2 silicon carbide SGTOs were evaluated in an RLC pulse circuit which provided a half-sine shaped pulse at a width of 1 ms. The parameters assessed

  8. PREPARATION OF B-MODIFICATION SILICON CARBIDE ALLOYED WITH VARIOUS IMPURITIES,

    Science.gov (United States)

    The beta-modification of silicon carbide can be obtained by any of the following methods: (1) synthesis from silicon and carbon (graphite) at 1400...certain metals, a process based on the substantial temperature variation of the solubility of silicon carbide in fused metals; beta-SiC is obtained in

  9. Sintering of nano crystalline silicon carbide doping with aluminium nitride

    Indian Academy of Sciences (India)

    M S Datta; A K Bandyopadhyay; B Chaudhuri

    2002-04-01

    Sinterable silicon carbide powders were prepared by attrition milling and chemical processing of an acheson type -SiC. Pressureless sintering of these powders was achieved by addition of aluminium nitride together with carbon. Nearly 99% sintered density was obtained. The mechanism of sintering was studied by scanning electron microscopy and transmission electron microscopy. This study shows that the mechanism is a solid sintering process.

  10. Mechanism of combustion synthesis of silicon carbide

    Science.gov (United States)

    Narayan, J.; Raghunathan, R.; Chowdhury, R.; Jagannadham, K.

    1994-06-01

    The mechanism of self-propagating high-temperature synthesis (SHS) or combustion synthesis of SiC has been investigated using pellets consisting of silicon and carbon powders. The combustion reaction was initiated by rapidly heating the pellet on a graphite strip. The reaction products were analyzed using scanning and transmission electron microscopy, x-ray diffraction, and Raman spectroscopy. The results show that it is possible to produce β-SiC without any residual silicon and carbon. Occasionally, a very small number density of α-SiC precipitates embedded in the β-SiC matrix was observed. Based upon the microstructural features, it is proposed that the formation of SiC involves the dissolution of carbon into liquid silicon, diffusion of C into liquid silicon, and subsequent precipitation of SiC. The size of the SiC crystallites is determined by the diffusion coefficient of carbon in liquid silicon and the time available for SiC precipitation. The activation enthalpy for the SHS process is estimated to be 59±3 kcal/mol.

  11. Parallel microwave chemistry in silicon carbide microtiter platforms: a review.

    Science.gov (United States)

    Kappe, C Oliver; Damm, Markus

    2012-02-01

    In this review, applications of silicon carbide-based microtiter platforms designed for use in combination with dedicated multimode microwave reactors are described. These platforms are employed not only for the efficient parallel synthesis of compound libraries, but also in the context of high-throughput reaction screening/optimization and a number of other (bio)analytical and biomedical applications. Since the semiconducting plate material (silicon carbide) is strongly microwave absorbing and possesses high thermal conductivity, no temperature gradients across the microtiter plate exist. Therefore, many of the disadvantages experienced in attempting to perform microtiter plate chemistry under conventional microwave conditions can be eliminated. In general, the silicon carbide-based microtiter platforms allow sealed vessel processing (either directly in the well or in glass vials placed into the wells) of volumes ranging from 0.02-3.0 mL at a maximum temperature/pressure limit of 200°C/20 bar. Depending on the specific plate and rotor configuration, a maximum of 80-192 transformations can be carried out in parallel in a single microwave irradiation experiment under strict temperature control. A platform type utilizing HPLC/GC vials as reaction vessels allows analysis directly from the reaction vessel eliminating the need for a transfer step from the reaction to the analysis vial. The latter system is particularly useful for analytical applications as well as reaction optimization/screening.

  12. Barrier properties of nano silicon carbide designed chitosan nanocomposites.

    Science.gov (United States)

    Pradhan, Gopal C; Dash, Satyabrata; Swain, Sarat K

    2015-12-10

    Nano silicon carbide (SiC) designed chitosan nanocomposites were prepared by solution technique. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used for studying structural interaction of nano silicon carbide (SiC) with chitosan. The morphology of chitosan/SiC nanocomposites was investigated by field emission scanning electron microscope (FESEM), and high resolution transmission electron microscope (HRTEM). The thermal stability of chitosan was substantially increased due to incorporation of stable silicon carbide nanopowder. The oxygen permeability of chitosan/SiC nanocomposites was reduced by three folds as compared to the virgin chitosan. The chemical resistance properties of chitosan were enhanced due to the incorporation of nano SiC. The biodegradability was investigated using sludge water. The tensile strength of chitosan/SiC nanocomposites was increased with increasing percentage of SiC. The substantial reduction in oxygen barrier properties in combination with increased thermal stability, tensile strength and chemical resistance properties; the synthesized nanocomposite may be suitable for packaging applications.

  13. Silicon Carbide Mounts for Fabry-Perot Interferometers

    Science.gov (United States)

    Lindemann, Scott

    2011-01-01

    Etalon mounts for tunable Fabry- Perot interferometers can now be fabricated from reaction-bonded silicon carbide structural components. These mounts are rigid, lightweight, and thermally stable. The fabrication of these mounts involves the exploitation of post-casting capabilities that (1) enable creation of monolithic structures having reduced (in comparison with prior such structures) degrees of material inhomogeneity and (2) reduce the need for fastening hardware and accommodations. Such silicon carbide mounts could be used to make lightweight Fabry-Perot interferometers or could be modified for use as general lightweight optical mounts. Heretofore, tunable Fabry-Perot interferometer structures, including mounting hardware, have been made from the low-thermal-expansion material Invar (a nickel/iron alloy) in order to obtain the thermal stability required for spectroscopic applications for which such interferometers are typically designed. However, the high mass density of Invar structures is disadvantageous in applications in which there are requirements to minimize mass. Silicon carbide etalon mounts have been incorporated into a tunable Fabry-Perot interferometer of a prior design that originally called for Invar structural components. The strength, thermal stability, and survivability of the interferometer as thus modified are similar to those of the interferometer as originally designed, but the mass of the modified interferometer is significantly less than the mass of the original version.

  14. Bonding and Integration Technologies for Silicon Carbide Based Injector Components

    Science.gov (United States)

    Halbig, Michael C.; Singh, Mrityunjay

    2008-01-01

    Advanced ceramic bonding and integration technologies play a critical role in the fabrication and application of silicon carbide based components for a number of aerospace and ground based applications. One such application is a lean direct injector for a turbine engine to achieve low NOx emissions. Ceramic to ceramic diffusion bonding and ceramic to metal brazing technologies are being developed for this injector application. For the diffusion bonding, titanium interlayers (PVD and foils) were used to aid in the joining of silicon carbide (SiC) substrates. The influence of such variables as surface finish, interlayer thickness (10, 20, and 50 microns), processing time and temperature, and cooling rates were investigated. Microprobe analysis was used to identify the phases in the bonded region. For bonds that were not fully reacted an intermediate phase, Ti5Si3Cx, formed that is thermally incompatible in its thermal expansion and caused thermal stresses and cracking during the processing cool-down. Thinner titanium interlayers and/or longer processing times resulted in stable and compatible phases that did not contribute to microcracking and resulted in an optimized microstructure. Tensile tests on the joined materials resulted in strengths of 13-28 MPa depending on the SiC substrate material. Non-destructive evaluation using ultrasonic immersion showed well formed bonds. For the joining technology of brazing Kovar fuel tubes to silicon carbide, preliminary development of the joining approach has begun. Various technical issues and requirements for the injector application are addressed.

  15. Compressibility and thermal expansion of cubic silicon nitride

    DEFF Research Database (Denmark)

    Jiang, Jianzhong; Lindelov, H.; Gerward, Leif

    2002-01-01

    The compressibility and thermal expansion of the cubic silicon nitride (c-Si3N4) phase have been investigated by performing in situ x-ray powder-diffraction measurements using synchrotron radiation, complemented with computer simulations by means of first-principles calculations. The bulk...... compressibility of the c-Si3N4 phase originates from the average of both Si-N tetrahedral and octahedral compressibilities where the octahedral polyhedra are less compressible than the tetrahedral ones. The origin of the unit cell expansion is revealed to be due to the increase of the octahedral Si-N and N-N bond...

  16. Evaluation of Bidirectional Silicon Carbide Solid-State Circuit Breaker v3.2

    Science.gov (United States)

    2013-07-01

    Evaluation of Bidirectional Silicon Carbide Solid-State Circuit Breaker v3.2 by D. Urciuoli ARL-MR-0845 July 2013...Evaluation of Bidirectional Silicon Carbide Solid-State Circuit Breaker v3.2 D. Urciuoli Sensors and Electron Devices Directorate, ARL...2012 to 20 March 2013 4. TITLE AND SUBTITLE Evaluation of Bidirectional Silicon Carbide Solid-State Circuit Breaker v3.2 5a. CONTRACT NUMBER 5b

  17. Synthesis and Photoluminescence Property of Silicon Carbide Nanowires Via Carbothermic Reduction of Silica

    OpenAIRE

    Luo Xiaogang; Ma Wenhui; Zhou Yang; Liu Dachun; Yang Bin; Dai Yongnian

    2009-01-01

    Abstract Silicon carbide nanowires have been synthesized at 1400 °C by carbothermic reduction of silica with bamboo carbon under normal atmosphere pressure without metallic catalyst. X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy and Fourier transformed infrared spectroscopy were used to characterize the silicon carbide nanowires. The results show that the silicon carbide nanowires have a core–shell structure and gr...

  18. Extreme-Environment Silicon-Carbide (SiC) Wireless Sensor Suite

    Science.gov (United States)

    Yang, Jie

    2015-01-01

    Phase II objectives: Develop an integrated silicon-carbide wireless sensor suite capable of in situ measurements of critical characteristics of NTP engine; Compose silicon-carbide wireless sensor suite of: Extreme-environment sensors center, Dedicated high-temperature (450 deg C) silicon-carbide electronics that provide power and signal conditioning capabilities as well as radio frequency modulation and wireless data transmission capabilities center, An onboard energy harvesting system as a power source.

  19. Silicon carbide as platform for energy applications

    DEFF Research Database (Denmark)

    Syväjärvi, Mikael; Jokubavicius, Valdas; Sun, Jianwu

    and solar cells, and further pursue concepts in materials for thermoelectrics, biofuel cells and supercapacitor research proposals. In fact, there are a number of energy applications which can be based on the SiC materials.- Fluorescent SiC for white LED in general lighting - Cubic SiC for a highly.......Common to these SiC applications is the knowhow in growth technology based on SiC processes using the sublimation based method. We will give an overview of this new research field and outline the energy applications that could be adressed in a near future....

  20. Graphitized silicon carbide microbeams: wafer-level, self-aligned graphene on silicon wafers.

    Science.gov (United States)

    Cunning, Benjamin V; Ahmed, Mohsin; Mishra, Neeraj; Kermany, Atieh Ranjbar; Wood, Barry; Iacopi, Francesca

    2014-08-15

    Currently proven methods that are used to obtain devices with high-quality graphene on silicon wafers involve the transfer of graphene flakes from a growth substrate, resulting in fundamental limitations for large-scale device fabrication. Moreover, the complex three-dimensional structures of interest for microelectromechanical and nanoelectromechanical systems are hardly compatible with such transfer processes. Here, we introduce a methodology for obtaining thousands of microbeams, made of graphitized silicon carbide on silicon, through a site-selective and wafer-scale approach. A Ni-Cu alloy catalyst mediates a self-aligned graphitization on prepatterned SiC microstructures at a temperature that is compatible with silicon technologies. The graphene nanocoating leads to a dramatically enhanced electrical conductivity, which elevates this approach to an ideal method for the replacement of conductive metal films in silicon carbide-based MEMS and NEMS devices.

  1. Photoluminescence and Raman spectroscopy characterization of boron- and nitrogen-doped 6H silicon carbide

    DEFF Research Database (Denmark)

    Ou, Yiyu; Jokubavicius, Valdas; Liu, Chuan

    2011-01-01

    Boron - and nitrogen-doped 6H silicon carbide epilayers grown on low off-axis 6H silicon carbide substrates have been characterized by photoluminescence and Raman spectroscopy. Combined with secondary ion mass spectrometry results, preferable doping type and optimized concentration could be propo......Boron - and nitrogen-doped 6H silicon carbide epilayers grown on low off-axis 6H silicon carbide substrates have been characterized by photoluminescence and Raman spectroscopy. Combined with secondary ion mass spectrometry results, preferable doping type and optimized concentration could...

  2. Production of technical silicon and silicon carbide from rice-husk

    Directory of Open Access Journals (Sweden)

    A. Z. Issagulov

    2014-10-01

    Full Text Available In the article there are studied physical and chemical properties of silicon-carbonic raw material – rice-husk, thermophysical characteristics of the process of rice-husk pyrolysis in nonreactive and oxidizing environment; structure and phase composition of products of the rice-husk pyrolysis in interval of temperatures 150 – 850 °С and high temperature pyrolysis in interval of temperatures 900 – 1 500 °С. There are defined the silicon-carbon production conditions, which meet the requirements applicable to charging materials at production of technical silicon and silicon carbide.

  3. Spin-photon entanglement interfaces in silicon carbide defect centers

    Science.gov (United States)

    Economou, Sophia E.; Dev, Pratibha

    2016-12-01

    Optically active spins in solid-state systems can be engineered to emit photons that are entangled with the spin in the solid. This allows for applications such as quantum communications, quantum key distribution, and distributed quantum computing. Recently, there has been a strong interest in silicon carbide defects, as they emit very close to the telecommunication wavelength, making them excellent candidates for long range quantum communications. In this work we develop explicit schemes for spin-photon entanglement in several SiC defects: the silicon monovacancy, the silicon divacancy, and the NV center in SiC. Distinct approaches are given for (i) single-photon and spin entanglement and (ii) the generation of long strings of entangled photons. The latter are known as cluster states and comprise a resource for measurement-based quantum information processing.

  4. Liquid-Liquid Phase Transition in Nanoconfined Silicon Carbide.

    Science.gov (United States)

    Wu, Weikang; Zhang, Leining; Liu, Sida; Ren, Hongru; Zhou, Xuyan; Li, Hui

    2016-03-01

    We report theoretical evidence of a liquid-liquid phase transition (LLPT) in liquid silicon carbide under nanoslit confinement. The LLPT is characterized by layering transitions induced by confinement and pressure, accompanying the rapid change in density. During the layering transition, the proportional distribution of tetracoordinated and pentacoordinated structures exhibits remarkable change. The tricoordinated structures lead to the microphase separation between silicon (with the dominant tricoordinated, tetracoordinated, and pentacoordinated structures) and carbon (with the dominant tricoordinated structures) in the layer close to the walls. A strong layer separation between silicon atoms and carbon atoms is induced by strong wall-liquid forces. Importantly, the pressure confinement phase diagram with negative slopes for LLPT lines indicates that, under high pressure, the LLPT is mainly confinement-induced, but under low pressure, it becomes dominantly pressure-induced.

  5. Epitaxial growth of cadmium telluride films on silicon with a buffer silicon carbide layer

    Science.gov (United States)

    Antipov, V. V.; Kukushkin, S. A.; Osipov, A. V.

    2017-02-01

    An epitaxial 1-3-μm-thick cadmium telluride film has been grown on silicon with a buffer silicon carbide layer using the method of open thermal evaporation and condensation in vacuum for the first time. The optimum substrate temperature was 500°C at an evaporator temperature of 580°C, and the growth time was 4 s. In order to provide more qualitative growth of cadmium telluride, a high-quality 100-nm-thick buffer silicon carbide layer was previously synthesized on the silicon surface using the method of topochemical substitution of atoms. The ellipsometric, Raman, X-ray diffraction, and electron-diffraction analyses showed a high structural perfection of the CdTe layer in the absence of a polycrystalline phase.

  6. Synthesis of silicon carbide at room temperature from colloidal suspensions of silicon dioxide and carbon nanotubes

    Science.gov (United States)

    Zhukalin, D. A.; Tuchin, A. V.; Kulikova, T. V.; Bityutskaya, L. A.

    2015-11-01

    Experimental and theoretical approaches were used for the investigation of mechanisms and conditions of self-organized nanostructures formation in the drying drop of the mixture of colloidal suspensions of nanoscale amorphous silicon dioxide and carbon nanotubes. The formation of rodlike structures with diameter 250-300nm and length ∼4pm was revealed. The diffraction analysis of the obtained nanostructures showed the formation of the silicon carbide phase at room temperature.

  7. Continuous synthesis of silicon carbide whiskers

    Science.gov (United States)

    Choi, Heon-Jin; Lee, June-Gunn

    1995-04-01

    Experimental synthesis of SiC whiskers coupled with thermodynamic calculations revealed the preferred reaction routes for the efficient synthesis of SiC whiskers. This formed the basis for the design of a continuous reactor, which consists of a boat-train loaded with silica-carbon mixture and iron-coated graphite substrate above it in an alumina-tube reactor. High-quality SiC whiskers have been grown with diameters of 1-3 micron. The yield was about 30% based on the silicon input as SiO2 and output as SiC whiskers. This demonstrates the feasibility of continuous SiC whiskers production without the additional processes of purification and classification.

  8. Silicon Carbide Emitter Turn-Off Thyristor

    Directory of Open Access Journals (Sweden)

    Jun Wang

    2008-01-01

    Full Text Available A novel MOS-controlled SiC thyristor device, the SiC emitter turn-off thyristor (ETO is a promising technology for future high-voltage switching applications because it integrates the excellent current conduction capability of a SiC thyristor with a simple MOS-control interface. Through unity-gain turn-off, the SiC ETO also achieves excellent Safe Operation Area (SOA and faster switching speeds than silicon ETOs. The world's first 4.5-kV SiC ETO prototype shows a forward voltage drop of 4.26 V at 26.5 A/cm2 current density at room and elevated temperatures. Tested in an inductive circuit with a 2.5 kV DC link voltage and a 9.56-A load current, the SiC ETO shows a fast turn-off time of 1.63 microseconds and a low 9.88 mJ turn-off energy. The low switching loss indicates that the SiC ETO could operate at about 4 kHz if 100 W/cm2 conduction and the 100 W/cm2 turn-off losses can be removed by the thermal management system. This frequency capability is about 4 times higher than 4.5-kV-class silicon power devices. The preliminary demonstration shows that the SiC ETO is a promising candidate for high-frequency, high-voltage power conversion applications, and additional developments to optimize the device for higher voltage (>5 kV and higher frequency (10 kHz are needed.

  9. Microstructural Evolution of Chloride-Cleaned Silicon Carbide Aluminum Composites

    Science.gov (United States)

    Adeosun, S. O.; Akpan, E. I.; Gbenebor, O. P.; Balogun, S. A.

    2016-02-01

    This study examines the synergy between reinforcement surface modifications on the evolution of microstructures of AA6011-silicon carbide particle (SiCp) composites in multidirectional solidification. Silicon carbide particles (SiCp) were cleaned with ammonium chloride, tin(II) chloride, sodium chloride, and palladium(II) chloride and used as reinforcement to cast AA6011-SiCp composites by applying the stir casting method. A scanning electron microscope and x-ray diffractometer were used to investigate the morphology and phases present, respectively, in the composite material. Results show that wetting agents were effective as they inhibited the formation of Al4C3 in all modified composites. The modified SiCp was found to have varying effects on the morphology, dendrite arm size and direction, size and configuration of AlFeSi, and the amount of eutectic silicon depending on the concentration of the reagent and cleaning time. The highest effect was shown by the use of 40 g/L of tin(II) chloride. The composites had short dendritic arms, good interfacial interaction, and only a few crystals of AlFeSi.

  10. THE CRYSTAL STRUCTURE OF THE NEW SILICON CARBIDE POLYMORPH 69R,

    Science.gov (United States)

    The 69R polymorph is one of the 32 silicon carbide polymorphs recently discovered by us. The space group is R3m and the unit cell is hexagonal with...and in two industrial silicon carbide crystal plates. They all pair with the fundamental type 6H. The five ways of pairing are: 6H + 69R + 87R, 6H

  11. Photoluminescence and Raman spectroscopy characterization of boron- and nitrogen-doped 6H silicon carbide

    DEFF Research Database (Denmark)

    Ou, Yiyu; Jokubavicius, Valdas; Liu, Chuan

    2011-01-01

    Boron - and nitrogen-doped 6H silicon carbide epilayers grown on low off-axis 6H silicon carbide substrates have been characterized by photoluminescence and Raman spectroscopy. Combined with secondary ion mass spectrometry results, preferable doping type and optimized concentration could...

  12. Method of enhanced lithiation of doped silicon carbide via high temperature annealing in an inert atmosphere

    Science.gov (United States)

    Hersam, Mark C.; Lipson, Albert L.; Bandyopadhyay, Sudeshna; Karmel, Hunter J; Bedzyk, Michael J

    2014-05-27

    A method for enhancing the lithium-ion capacity of a doped silicon carbide is disclosed. The method utilizes heat treating the silicon carbide in an inert atmosphere. Also disclosed are anodes for lithium-ion batteries prepared by the method.

  13. Study of Nitrogen Concentration in Silicon Carbide

    Science.gov (United States)

    Wang, Hui; Yan, Cheng-Feng; Kong, Hai-Kuan; Chen, Jian-Jun; Xin, Jun; Shi, Er-Wei; Yang, Jian-Hua

    2013-06-01

    This work focused on studying the nitrogen concentration ( C N) in SiC. The variations of C N in the synthesis of SiC powder as well as the transport during SiC crystal growth have been investigated for broad ranges of temperature and Ar pressure. Before SiC crystal growth, SiC powders were synthesized from high-purity silicon and carbon powders. The concentrations of nitrogen, free C, and free Si in the as-prepared powders were all measured. C N in the SiC source powder decreased with increasing temperature and decreasing Ar pressure, whereas it did not show a remarkable trend with the molar ratio of free Si to free C. SiC crystal was then grown by the physical vapor transport (PVT) technique using the as-prepared powder. The distribution of C N in the remaining material indirectly indicated the temperature field of crystal growth. In addition, compared with introducing N2 during SiC crystal growth, doping with nitrogen during synthesis of the SiC source powder might be a better method to control C N in SiC crystals.

  14. Molybdenum isotopic composition of single silicon carbides from supernovae.

    Energy Technology Data Exchange (ETDEWEB)

    Amari, S.; Clayton, R. N.; Davis, A. M.; Lewis, R. S.; Pellin, M. J.

    1999-02-03

    Presolar silicon carbide grains form in a variety of types of stars, including asymptotic giant branch red giant stars and supernovae. The dominant mechanisms of heavy element nucleosynthesis, the s-process and r-process, are thought to occur in AGB stars and supernovae, respectively. We have previously reported that mainstream SiC grains have strong enrichments in the s-process isotopes of Sr, Zr and Mo. We report here the first measurements of Mo isotopes in X-type SiC grains, which have previously been identified as having formed from supernova ejecta.

  15. Thermal Properties of Polyimide Composites with Nanostructured Silicon Carbide

    Directory of Open Access Journals (Sweden)

    Alyona Igorevna Wozniak

    2016-12-01

    Full Text Available A series of polyimide composites reinforced with different loadings of silicon carbide (SiC nanoparticles are prepared by in-situ polymerization technique. The polyimide (PI matrix resin is derived from 4,4’-oxydianiline (4,4’-ODA and pyromelliticdianhydride (PMDA. The dispersions of SiC nanoparticles are prepared via ultrasonic irradiation or mechanical homogenization. In this method, the SiC nanoparticles are dispersed in diamine solution followed by polymerization with dianhydride. The composites obtained under sonication were found to have lower thermal properties than composites prepared under homogenization.

  16. PROPERTIES OF DEFECTS AND IMPLANTS IN Mg+ IMPLANTED SILICON CARBIDE

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Weilin; Zhu, Zihua; Varga, Tamas; Bowden, Mark E.; Manandhar, Sandeep; Roosendaal, Timothy J.; Hu, Shenyang Y.; Henager, Charles H.; Kurtz, Richard J.; Wang, Yongqiang

    2013-09-25

    As a candidate material for fusion reactor designs, silicon carbide (SiC) under high-energy neutron irradiation undergoes atomic displacement damage and transmutation reactions that create magnesium as one of the major metallic products. The presence of Mg and lattice disorder in SiC is expected to affect structural stability and degrade thermo-mechanical properties that could limit SiC lifetime for service. We have initiated a combined experimental and computational study that uses Mg+ ion implantation and multiscale modeling to investigate the structural and chemical effects in Mg implanted SiC and explore possible property degradation mechanisms.

  17. Structural Evolution of Silicon Carbide Nanopowders during the Sintering Process

    Directory of Open Access Journals (Sweden)

    Galina Volkova

    2014-01-01

    Full Text Available Processes of sintering of silicon carbide nanopowder were investigated. Values of density (ρ=3.17 g/cm3 and strength (σ=450 MPa were obtained. Within the theory of dispersed systems, the temperature evolution of the materials structure was considered. The relationship between sintering temperature, characteristics of crystal structure and physical properties, in particular, density, and strength of aforementioned ceramics was established. It was concluded that it is necessary to suppress the anomalous diffusion at temperatures above 2080°C.

  18. Temperature Induced Voltage Offset Drifts in Silicon Carbide Pressure Sensors

    Science.gov (United States)

    Okojie, Robert S.; Lukco, Dorothy; Nguyen, Vu; Savrun, Ender

    2012-01-01

    We report the reduction of transient drifts in the zero pressure offset voltage in silicon carbide (SiC) pressure sensors when operating at 600 C. The previously observed maximum drift of +/- 10 mV of the reference offset voltage at 600 C was reduced to within +/- 5 mV. The offset voltage drifts and bridge resistance changes over time at test temperature are explained in terms of the microstructure and phase changes occurring within the contact metallization, as analyzed by Auger electron spectroscopy and field emission scanning electron microscopy. The results have helped to identify the upper temperature reliable operational limit of this particular metallization scheme to be 605 C.

  19. Dynamic consolidation of aluminum-silicon carbide composites

    Energy Technology Data Exchange (ETDEWEB)

    Rabin, B.H.; Korth, G.E.; Williamson, R.L.

    1990-01-01

    Dynamic consolidation was investigated as a potential method for producing P/M metal matrix composites. In this study, 2124 aluminum powders were mixed with silicon carbide particulate and consolidated using explosives. Numerical simulations were performed to provide insight into the consolidation process and to aid in the selection of experimental conditions. The microstructure of the as-consolidated product was dependent upon processing variables. Careful control of the shock parameters allowed full density, crack free composites to be achieved in cylindrical geometries. Although full density was obtained, low fracture strengths suggested a lack of interparticle bonding, probably resulting from the limited ability to redistribute surface oxides during consolidation. 10 refs., 9 figs.

  20. Catalytic synthesis of silicon carbide preceramic polymers: Polycarbosilanes

    Energy Technology Data Exchange (ETDEWEB)

    Berry, D.H.

    1991-11-01

    Polycarbosilanes are the most successful and widely studied class of polymer precursors for silicon carbide, but traditional methods for thier synthesis are inefficient and nonselective. This project is focused on developing transition metal catalysts for the synthesis of polycarbosilanes and other perceramic polymers. In recent work we have developed the first homogeneous transition metal catalysts for the dehydrogenative coupling of simple alkyl silanes to oligomeric and polymeric carbosilanes, H-(SiR{sub 2}CR{prime}{sub 2}){sub n}-SiR{sub 3}. Future work will help elucidate the mechanism of the catalytic process, explore the use of hydrogen acceptors as reaction accelerators, and develop new and more active catalysts.

  1. Fundamental Studies and Device Development in Beta Silicon Carbide.

    Science.gov (United States)

    1987-08-31

    Vol. 97, p.2 3 3 . 7. MB. Wessels, H. C. Gatos , and A. F. Witt, in Silicon Carbide-1973, edited by R. C. Marshall, J. W. Faust, Jr., and C. E. Ryan...G.F. Kholuyanov and V.E. Chelnokov, Sov. Phys. Semicond. 12, 1372 (1978). 8. E.V. Kalinina, A.V. Suvorov and G.F. Kholuyanov, Soy . Phys. Semicond...Campbell, Solid State Electronics 12L 683 (1974). 17. R. G. Verenchikova, V. 1. Sankin and E. 1. Radovanova, Soy . Phys. Semicond. 12 or 1123 (1983). 18

  2. Synthesis and Photoluminescence Property of Silicon Carbide Nanowires Via Carbothermic Reduction of Silica.

    Science.gov (United States)

    Luo, Xiaogang; Ma, Wenhui; Zhou, Yang; Liu, Dachun; Yang, Bin; Dai, Yongnian

    2009-11-11

    Silicon carbide nanowires have been synthesized at 1400 degrees C by carbothermic reduction of silica with bamboo carbon under normal atmosphere pressure without metallic catalyst. X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, transmission electron microscopy and Fourier transformed infrared spectroscopy were used to characterize the silicon carbide nanowires. The results show that the silicon carbide nanowires have a core-shell structure and grow along direction. The diameter of silicon carbide nanowires is about 50-200 nm and the length from tens to hundreds of micrometers. The vapor-solid mechanism is proposed to elucidate the growth process. The photoluminescence of the synthesized silicon carbide nanowires shows significant blueshifts, which is resulted from the existence of oxygen defects in amorphous layer and the special rough core-shell interface.

  3. Investigation on the Effects of Titanium Diboride Particle Size on Radiation Shielding Properties of Titanium Diboride Reinforced Boron Carbide-Silicon Carbide Composites

    OpenAIRE

    A.O. Addemir; A.C. Akarsu; A.B. Tugrul; B. Buyuk

    2012-01-01

    Composite materials have wide application areas in industry. Boron Carbide is an important material for nuclear technology. Silicon carbide is a candidate material in the first wall and blankets of fusion power plants. Titanium diboride reinforced boron carbide-silicon carbide composites which were produced from different titanium diboride particle sizes and ratios were studied for searching of the behaviour against the gamma ray. Cs-137 gamma radioisotope was used as gamma source in the expe...

  4. Silicon nanocrystals on amorphous silicon carbide alloy thin films: Control of film properties and nanocrystals growth

    Energy Technology Data Exchange (ETDEWEB)

    Barbe, Jeremy, E-mail: jeremy.barbe@hotmail.com [CEA, Liten, 17 rue des Martyrs, 38054 Grenoble Cedex 9 (France); Universite de Toulouse, UPS, INPT, LAPLACE (Laboratoire Plasma et Conversion d' Energie), 118 route de Narbonne, 31062 Toulouse (France); Xie, Ling; Leifer, Klaus [Department of Engineering Sciences, Uppsala University, Box 534, S-751 21 Uppsala (Sweden); Faucherand, Pascal; Morin, Christine; Rapisarda, Dario; De Vito, Eric [CEA, Liten, 17 rue des Martyrs, 38054 Grenoble Cedex 9 (France); Makasheva, Kremena; Despax, Bernard [Universite de Toulouse, UPS, INPT, LAPLACE (Laboratoire Plasma et Conversion d' Energie), 118 route de Narbonne, 31062 Toulouse (France); CNRS, LAPLACE, F-31062 Toulouse (France); Perraud, Simon [CEA, Liten, 17 rue des Martyrs, 38054 Grenoble Cedex 9 (France)

    2012-11-01

    The present study demonstrates the growth of silicon nanocrystals on amorphous silicon carbide alloy thin films. Amorphous silicon carbide films [a-Si{sub 1-x}C{sub x}:H (with x < 0.3)] were obtained by plasma enhanced chemical vapor deposition from a mixture of silane and methane diluted in hydrogen. The effect of varying the precursor gas-flow ratio on the film properties was investigated. In particular, a wide optical band gap (2.3 eV) was reached by using a high methane-to-silane flow ratio during the deposition of the a-Si{sub 1-x}C{sub x}:H layer. The effect of short-time annealing at 700 Degree-Sign C on the composition and properties of the layer was studied by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. It was observed that the silicon-to-carbon ratio in the layer remains unchanged after short-time annealing, but the reorganization of the film due to a large dehydrogenation leads to a higher density of SiC bonds. Moreover, the film remains amorphous after the performed short-time annealing. In a second part, it was shown that a high density (1 Multiplication-Sign 10{sup 12} cm{sup -2}) of silicon nanocrystals can be grown by low pressure chemical vapor deposition on a-Si{sub 0.8}C{sub 0.2} surfaces at 700 Degree-Sign C, from silane diluted in hydrogen. The influence of growth time and silane partial pressure on nanocrystals size and density was studied. It was also found that amorphous silicon carbide surfaces enhance silicon nanocrystal nucleation with respect to SiO{sub 2}, due to the differences in surface chemical properties. - Highlights: Black-Right-Pointing-Pointer Silicon nanocrystals (Si-NC) growth on amorphous silicon carbide alloy thin films Black-Right-Pointing-Pointer Plasma deposited amorphous silicon carbide films with well-controlled properties Black-Right-Pointing-Pointer Study on the thermal effect of 700 Degree-Sign C short-time annealing on the layer properties Black-Right-Pointing-Pointer Low pressure

  5. Multi-band silicon quantum dots embedded in an amorphous matrix of silicon carbide

    Science.gov (United States)

    Chang, Geng-rong; Ma, Fei; Ma, Da-yan; Xu, Ke-wei

    2010-11-01

    Silicon quantum dots embedded in an amorphous matrix of silicon carbide were realized by a magnetron co-sputtering process and post-annealing. X-ray photoelectron spectroscopy, glancing x-ray diffraction, Raman spectroscopy and high-resolution transmission electron microscopy were used to characterize the chemical composition and the microstructural properties. The results show that the sizes and size distribution of silicon quantum dots can be tuned by changing the annealing atmosphere and the atom ratio of silicon and carbon in the matrix. A physicochemical mechanism is proposed to demonstrate this formation process. Photoluminescence measurements indicate a multi-band configuration due to the quantum confinement effect of silicon quantum dots with different sizes. The PL spectra are further widened as a result of the existence of amorphous silicon quantum dots. This multi-band configuration would be extremely advantageous in improving the photoelectric conversion efficiency of photovoltaic solar cells.

  6. Epitaxy of silicon carbide on silicon: Micromorphological analysis of growth surface evolution

    Science.gov (United States)

    Shikhgasan, Ramazanov; Ştefan, Ţălu; Dinara, Sobola; Sebastian, Stach; Guseyn, Ramazanov

    2015-10-01

    The main purpose of our research was the study of evolution of silicon carbide films on silicon by micromorphological analysis. Surface micromorphologies of Silicon Carbide epilayers with two different thicknesses were compared by means of fractal geometry. Silicon Carbide films were prepared on Si substrates by magnetron sputtering of polycrystalline target SiC in Ar atmosphere (99.999% purity). Synthesis of qualitative SiC/Si templates solves the questions of large diameter SiC single-crystal wafers formation. This technology decreases financial expenditure and provides integration of SiC into silicon technology. These hybrid substrates with buffer layer of high oriented SiC are useful for growth of both wide band gap materials (SiC, AlN, GaN) and graphene. The main problem of SiC heteroepitaxy on Si (1 1 1) is the large difference (∼20%) of the lattice parameters. Fractal analysis of surface morphology of heteroepitaxial films could help to understand the films growth mechanisms. The 3D (three-dimensional) surfaces revealed a fractal structure at the nanometer scale. The fractal dimension (D) provided global quantitative values that characterize the scale properties of surface geometry.

  7. DECODING THE MESSAGE FROM METEORITIC STARDUST SILICON CARBIDE GRAINS

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Karen M.; Lugaro, Maria; Gibson, Brad K.; Pilkington, Kate, E-mail: maria.lugaro@monash.edu, E-mail: karen.michelle.lewis@gmail.com, E-mail: bkgibson@uclan.ac.uk, E-mail: kpilkington@uclan.ac.uk [Monash Centre for Astrophysics (MoCA), Monash University, Clayton VIC 3800 (Australia)

    2013-05-01

    Micron-sized stardust grains that originated in ancient stars are recovered from meteorites and analyzed using high-resolution mass spectrometry. The most widely studied type of stardust is silicon carbide (SiC). Thousands of these grains have been analyzed with high precision for their Si isotopic composition. Here we show that the distribution of the Si isotopic composition of the vast majority of stardust SiC grains carries the imprints of a spread in the age-metallicity distribution of their parent stars and of a power-law increase of the relative formation efficiency of SiC dust with the metallicity. This result offers a solution for the long-standing problem of silicon in stardust SiC grains, confirms the necessity of coupling chemistry and dynamics in simulations of the chemical evolution of our Galaxy, and constrains the modeling of dust condensation in stellar winds as a function of the metallicity.

  8. Decoding the message from meteoritic stardust silicon carbide grains

    CERN Document Server

    Lewis, Karen M; Gibson, Brad K; Pilkington, Kate

    2013-01-01

    Micron-sized stardust grains that originated in ancient stars are recovered from meteorites and analysed using high-resolution mass spectrometry. The most widely studied type of stardust is silicon carbide (SiC). Thousands of these grains have been analysed with high precision for their Si isotopic composition. Here we show that the distribution of the Si isotopic composition of the vast majority of stardust SiC grains carry the imprints of a spread in the age-metallicity distribution of their parent stars and of a power-law increase of the relative formation efficiency of SiC dust with the metallicity. This result offers a solution for the long-standing problem of silicon in stardust SiC grains, confirms the necessity of coupling chemistry and dynamics in simulations of the chemical evolution of our Galaxy, and constrains the modelling of dust condensation in stellar winds as function of the metallicity.

  9. Synthesis of silicon carbide thin films with polycarbosilane (PCS)

    Energy Technology Data Exchange (ETDEWEB)

    Colombo, P. [Univ. di Padova (Italy). Dept. di Ingegneria Meccanica-Settore Materiali; Paulson, T.E.; Pantano, C.G. [Pennsylvania State Univ., University Park, PA (United States). Dept. of Materials Science and Engineering

    1997-09-01

    Polycarbosilane (PCS) thin films were deposited on silicon (and other) substrates and heat treated under vacuum ({approximately}10{sup {minus}6} torr) at temperatures in the range of 200--1,200 C. At temperatures in the range of 1,000--1,200 C, the initially amorphous PCS films transformed to polycrystalline {beta}-silicon carbide ({beta}-SiC). Although PCS films could be deposited at thickness up to 2 {micro}m, the films with thicknesses >1 {micro}m could not be transformed to SiC without extensive cracking. The resulting SiC coatings were characterized using Fourier transform infrared spectroscopy, glancing-angle X-ray diffractometry, secondary-ion mass spectroscopy, Raman spectroscopy, transmission electron microscopy, and scanning electron microscopy. The temperature and time dependence of the amorphous-to-crystalline transition could be associated with the evolution of free carbon, oxygen, and hydrogen in the films.

  10. Optical thermometry based on level anticrossing in silicon carbide.

    Science.gov (United States)

    Anisimov, A N; Simin, D; Soltamov, V A; Lebedev, S P; Baranov, P G; Astakhov, G V; Dyakonov, V

    2016-09-14

    We report a giant thermal shift of 2.1 MHz/K related to the excited-state zero-field splitting in the silicon vacancy centers in 4H silicon carbide. It is obtained from the indirect observation of the optically detected magnetic resonance in the excited state using the ground state as an ancilla. Alternatively, relative variations of the zero-field splitting for small temperature differences can be detected without application of radiofrequency fields, by simply monitoring the photoluminescence intensity in the vicinity of the level anticrossing. This effect results in an all-optical thermometry technique with temperature sensitivity of 100 mK/Hz(1/2) for a detection volume of approximately 10(-6) mm(3). In contrast, the zero-field splitting in the ground state does not reveal detectable temperature shift. Using these properties, an integrated magnetic field and temperature sensor can be implemented on the same center.

  11. Optical thermometry based on level anticrossing in silicon carbide

    Science.gov (United States)

    Anisimov, A. N.; Simin, D.; Soltamov, V. A.; Lebedev, S. P.; Baranov, P. G.; Astakhov, G. V.; Dyakonov, V.

    2016-09-01

    We report a giant thermal shift of 2.1 MHz/K related to the excited-state zero-field splitting in the silicon vacancy centers in 4H silicon carbide. It is obtained from the indirect observation of the optically detected magnetic resonance in the excited state using the ground state as an ancilla. Alternatively, relative variations of the zero-field splitting for small temperature differences can be detected without application of radiofrequency fields, by simply monitoring the photoluminescence intensity in the vicinity of the level anticrossing. This effect results in an all-optical thermometry technique with temperature sensitivity of 100 mK/Hz1/2 for a detection volume of approximately 10-6 mm3. In contrast, the zero-field splitting in the ground state does not reveal detectable temperature shift. Using these properties, an integrated magnetic field and temperature sensor can be implemented on the same center.

  12. Low-temperature synthesis of silicon carbide powder using shungite

    Energy Technology Data Exchange (ETDEWEB)

    Gubernat, A.; Pichor, W.; Lach, R.; Zientara, D.; Sitarz, M.; Springwald, M.

    2017-07-01

    The paper presents the results of investigation the novel and simple method of synthesis of silicon carbide. As raw material for synthesis was used shungite, natural mineral rich in carbon and silica. The synthesis of SiC is possible in relatively low temperature in range 1500–1600°C. It is worth emphasising that compared to the most popular method of SiC synthesis (Acheson method where the temperature of synthesis is about 2500°C) the proposed method is much more effective. The basic properties of products obtained from different form of shungite and in wide range of synthesis temperature were investigated. The process of silicon carbide formation was proposed and discussed. In the case of synthesis SiC from powder of raw materials the product is also in powder form and not requires any additional process (crushing, milling, etc.). Obtained products are pure and after grain classification may be used as abrasive and polishing powders. (Author)

  13. Low-temperature synthesis of silicon carbide powder using shungite

    Directory of Open Access Journals (Sweden)

    Agnieszka Gubernat

    2017-01-01

    Full Text Available The paper presents the results of investigation the novel and simple method of synthesis of silicon carbide. As raw material for synthesis was used shungite, natural mineral rich in carbon and silica. The synthesis of SiC is possible in relatively low temperature in range 1500–1600 °C. It is worth emphasising that compared to the most popular method of SiC synthesis (Acheson method where the temperature of synthesis is about 2500 °C the proposed method is much more effective. The basic properties of products obtained from different form of shungite and in wide range of synthesis temperature were investigated. The process of silicon carbide formation was proposed and discussed. In the case of synthesis SiC from powder of raw materials the product is also in powder form and not requires any additional process (crushing, milling, etc.. Obtained products are pure and after grain classification may be used as abrasive and polishing powders.

  14. Cavity-Enhanced Measurements of Defect Spins in Silicon Carbide

    Science.gov (United States)

    Calusine, Greg; Politi, Alberto; Awschalom, David D.

    2016-07-01

    The identification of new solid-state defect-qubit candidates in widely used semiconductors has the potential to enable the use of nanofabricated devices for enhanced qubit measurement and control operations. In particular, the recent discovery of optically active spin states in silicon carbide thin films offers a scalable route for incorporating defect qubits into on-chip photonic devices. Here, we demonstrate the use of 3C silicon carbide photonic crystal cavities for enhanced excitation of color-center defect spin ensembles in order to increase measured photoluminescence signal count rates, optically detected magnetic-resonance signal intensities, and optical spin initialization rates. We observe an up to a factor of 30 increase in the photoluminescence and optically detected magnetic-resonance signals from Ky5 color centers excited by cavity-resonant excitation and increase the rate of ground-state spin initialization by approximately a factor of 2. Furthermore, we show that the 705-fold reduction in excitation mode volume and enhanced excitation and collection efficiencies provided by the structures can be used to overcome inhomogenous broadening in order to facilitate the study of defect-qubit subensemble properties. These results highlight some of the benefits that nanofabricated devices offer for engineering the local photonic environment of color-center defect qubits to enable applications in quantum information and sensing.

  15. Stress envelope of silicon carbide composites at elevated temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Nozawa, Takashi, E-mail: nozawa.takashi67@jaea.go.jp [Japan Atomic Energy Agency, 2-166 Omotedate, Obuchi, Rokkasho, Aomori 039-3212 (Japan); Kim, Sunghun [Graduate School of Energy Science, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan); Ozawa, Kazumi; Tanigawa, Hiroyasu [Japan Atomic Energy Agency, 2-166 Omotedate, Obuchi, Rokkasho, Aomori 039-3212 (Japan)

    2014-10-15

    To identify a comprehensive stress envelope, i.e., strength anisotropy map, of silicon carbide fiber-reinforced silicon carbide matrix composite (SiC/SiC composite) for practical component design, tensile and compressive tests were conducted using the small specimen test technique specifically tailored for high-temperature use. In-plane shear properties were, however, estimated using the off-axial tensile method and assuming that the mixed mode failure criterion, i.e., Tsai–Wu criterion, is valid for the composites. The preliminary test results indicate no significant degradation to either proportional limit stress (PLS) or fracture strength by tensile loading at temperatures below 1000 °C. A similarly good tolerance of compressive properties was identified at elevated temperatures, except for a slight degradation in PLS. With the high-temperature test data of tensile, compressive and in-plane shear properties, the stress envelopes at elevated temperatures were finally obtained. A slight reduction in the design limit was obvious at elevated temperatures when the compressive mode is dominant, whereas a negligibly small impact on the design is expected by considering the tensile loading case.

  16. Development of the SOFIA silicon carbide secondary mirror

    Science.gov (United States)

    Fruit, Michel; Antoine, Pascal; Varin, Jean-Luc; Bittner, Hermann; Erdmann, Matthias

    2003-02-01

    The SOFIA telescope is ajoint NASA-DLR project for a 2.5 m airborne Stratospheric Observatory for IR Astronomy to be flown in a specially adapted Boeing 747 SP plane, Kayser-Threde being resopinsible for the development of the Telescope Optics. The φ 352 mm Secondary Mirror is mounted ona chopping mechanism to allow avoidance of background noise during IR observations. Stiffness associated to lightness is a major demand for such a mirror to achieve high frequency chopping. This leads to select SIlicon Carbide for the mirror blank. Its development has been run by the ASTRIUM/BOOSTEC joint venture SiCSPACE, taking full benefit of the instrinsic properties of the BOOSTEC SiC-100 sintered material, associated to qualified processes specifically developed for space borne mirrors by ASTRIUM. Achieved performances include a low mass of 1.97 kg, a very high stiffness with a first resonant frequency of 1865 Hz and a measured optical surface accuracy of 39 nm rms, using Ion Beam Figuring. It is proposed here to present the major design features of the SOFIA Secondary Mirror, highlighting the main advantages of using Silicon Carbide, the main steps of its development and the achieved optomechanical performances of the developed mirror.

  17. Genesis Silicon Carbide Concentrator Target 60003 Preliminary Ellipsometry Mapping Results

    Science.gov (United States)

    Calaway, M. J.; Rodriquez, M. C.; Stansbery, E. K.

    2007-01-01

    The Genesis concentrator was custom designed to focus solar wind ions primarily for terrestrial isotopic analysis of O-17/O-16 and O-18/O-16 to +/-1%, N-15/N-14 to +/-1%, and secondarily to conduct elemental and isotopic analysis of Li, Be, and B. The circular 6.2 cm diameter concentrator target holder was comprised of four quadrants of highly pure semiconductor materials that included one amorphous diamond-like carbon, one C-13 diamond, and two silicon carbide (SiC). The amorphous diamond-like carbon quadrant was fractured upon impact at Utah Test and Training Range (UTTR), but the remaining three quadrants survived fully intact and all four quadrants hold an important collection of solar wind. The quadrants were removed from the target holder at NASA Johnso n Space Center Genesis Curation Laboratory in April 2005, and have been housed in stainless steel containers under continual nitrogen purge since time of disintegration. In preparation for allocation of a silicon carbide target for oxygen isotope analyses at UCLA, the two SiC targets were photographed for preliminary inspection of macro particle contamination from the hard non-nominal landing as well as characterized by spectroscopic ellipsometry to evaluate thin film contamination. This report is focused on Genesis SiC target sample number 60003.

  18. High Input Voltage, Silicon Carbide Power Processing Unit Performance Demonstration

    Science.gov (United States)

    Bozak, Karin E.; Pinero, Luis R.; Scheidegger, Robert J.; Aulisio, Michael V.; Gonzalez, Marcelo C.; Birchenough, Arthur G.

    2015-01-01

    A silicon carbide brassboard power processing unit has been developed by the NASA Glenn Research Center in Cleveland, Ohio. The power processing unit operates from two sources: a nominal 300 Volt high voltage input bus and a nominal 28 Volt low voltage input bus. The design of the power processing unit includes four low voltage, low power auxiliary supplies, and two parallel 7.5 kilowatt (kW) discharge power supplies that are capable of providing up to 15 kilowatts of total power at 300 to 500 Volts (V) to the thruster. Additionally, the unit contains a housekeeping supply, high voltage input filter, low voltage input filter, and master control board, such that the complete brassboard unit is capable of operating a 12.5 kilowatt Hall effect thruster. The performance of the unit was characterized under both ambient and thermal vacuum test conditions, and the results demonstrate exceptional performance with full power efficiencies exceeding 97%. The unit was also tested with a 12.5kW Hall effect thruster to verify compatibility and output filter specifications. With space-qualified silicon carbide or similar high voltage, high efficiency power devices, this would provide a design solution to address the need for high power electric propulsion systems.

  19. Hydrogen adsorption in metal-decorated silicon carbide nanotubes

    Science.gov (United States)

    Singh, Ram Sevak; Solanki, Ankit

    2016-09-01

    Hydrogen storage for fuel cell is an active area of research and appropriate materials with excellent hydrogen adsorption properties are highly demanded. Nanotubes, having high surface to volume ratio, are promising storage materials for hydrogen. Recently, silicon carbide nanotubes have been predicted as potential materials for future hydrogen storage application, and studies in this area are ongoing. Here, we report a systematic study on hydrogen adsorption properties in metal (Pt, Ni and Al) decorated silicon carbide nanotubes (SiCNTs) using first principles calculations based on density functional theory. The hydrogen adsorption properties are investigated by calculations of adsorption energy, electronic band structure, density of states (DOS) and Mulliken charge population analysis. Our findings show that hydrogen adsorptions on Pt, Ni and Al-decorated SiCNTs undergo spontaneous exothermic reactions with significant modulation of electronic structure of SiCNTs in all cases. Importantly, according to the Mulliken charge population analysis, dipole-dipole interaction causes chemisorptions of hydrogen in Pt, Ni and Al decorated SiCNTs with formation of chemical bonds. The study is a platform for the development of metal decorated SiCNTs for hydrogen adsorption or hydrogen storage application.

  20. Design and Fabrication of Silicon-on-Silicon-Carbide Substrates and Power Devices for Space Applications

    Directory of Open Access Journals (Sweden)

    Gammon P.M.

    2017-01-01

    Full Text Available A new generation of power electronic semiconductor devices are being developed for the benefit of space and terrestrial harsh-environment applications. 200-600 V lateral transistors and diodes are being fabricated in a thin layer of silicon (Si wafer bonded to silicon carbide (SiC. This novel silicon-on-silicon-carbide (Si/SiC substrate solution promises to combine the benefits of silicon-on-insulator (SOI technology (i.e device confinement, radiation tolerance, high and low temperature performance with that of SiC (i.e. high thermal conductivity, radiation hardness, high temperature performance. Details of a process are given that produces thin films of silicon 1, 2 and 5 μm thick on semi-insulating 4H-SiC. Simulations of the hybrid Si/SiC substrate show that the high thermal conductivity of the SiC offers a junction-to-case temperature ca. 4× less that an equivalent SOI device; reducing the effects of self-heating, and allowing much greater power density. Extensive electrical simulations are used to optimise a 600 V laterally diffused metal-oxide-semiconductor field-effect transistor (LDMOSFET implemented entirely within the silicon thin film, and highlight the differences between Si/SiC and SOI solutions.

  1. Development of refractory armored silicon carbide by infrared transient liquid phase processing

    Science.gov (United States)

    Hinoki, Tatsuya; Snead, Lance L.; Blue, Craig A.

    2005-12-01

    Tungsten (W) and molybdenum (Mo) were coated on silicon carbide (SiC) for use as a refractory armor using a high power plasma arc lamp at powers up to 23.5 MW/m 2 in an argon flow environment. Both tungsten powder and molybdenum powder melted and formed coating layers on silicon carbide within a few seconds. The effect of substrate pre-treatment (vapor deposition of titanium (Ti) and tungsten, and annealing) and sample heating conditions on microstructure of the coating and coating/substrate interface were investigated. The microstructure was observed by scanning electron microscopy (SEM) and optical microscopy (OM). The mechanical properties of the coated materials were evaluated by four-point flexural tests. A strong tungsten coating was successfully applied to the silicon carbide substrate. Tungsten vapor deposition and pre-heating at 5.2 MW/m 2 made for a refractory layer containing no cracks propagating into the silicon carbide substrate. The tungsten coating was formed without the thick reaction layer. For this study, small tungsten carbide grains were observed adjacent to the interface in all conditions. In addition, relatively large, widely scattered tungsten carbide grains and a eutectic structure of tungsten and silicon were observed through the thickness in the coatings formed at lower powers and longer heating times. The strength of the silicon carbide substrate was somewhat decreased as a result of the processing. Vapor deposition of tungsten prior to powder coating helped prevent this degradation. In contrast, molybdenum coating was more challenging than tungsten coating due to the larger coefficient of thermal expansion (CTE) mismatch as compared to tungsten and silicon carbide. From this work it is concluded that refractory armoring of silicon carbide by Infrared Transient Liquid Phase Processing is possible. The tungsten armored silicon carbide samples proved uniform, strong, and capable of withstanding thermal fatigue testing.

  2. Applications of Silicon Carbide for High Temperature Electronics and Sensors

    Science.gov (United States)

    Shields, Virgil B.

    1995-01-01

    Silicon carbide (SiC) is a wide bandgap material that shows great promise in high-power and high temperature electronics applications because of its high thermal conductivity and high breakdown electrical field. The excellent physical and electronic properties of SiC allows the fabrication of devices that can operate at higher temperatures and power levels than devices produced from either silicon or GaAs. Although modern electronics depends primarily upon silicon based devices, this material is not capable of handling may special requirements. Devices which operate at high speeds, at high power levels and are to be used in extreme environments at high temperatures and high radiation levels need other materials with wider bandgaps than that of silicon. Many space and terrestrial applications also have a requirement for wide bandgap materials. SiC also has great potential for high power and frequency operation due to a high saturated drift velocity. The wide bandgap allows for unique optoelectronic applications, that include blue light emitting diodes and ultraviolet photodetectors. New areas involving gas sensing and telecommunications offer significant promise. Overall, the properties of SiC make it one of the best prospects for extending the capabilities and operational regimes of the current semiconductor device technology.

  3. Characterization of silicon carbide and diamond detectors for neutron applications

    Science.gov (United States)

    Hodgson, M.; Lohstroh, A.; Sellin, P.; Thomas, D.

    2017-10-01

    The presence of carbon atoms in silicon carbide and diamond makes these materials ideal candidates for direct fast neutron detectors. Furthermore the low atomic number, strong covalent bonds, high displacement energies, wide bandgap and low intrinsic carrier concentrations make these semiconductor detectors potentially suitable for applications where rugged, high-temperature, low-gamma-sensitivity detectors are required, such as active interrogation, electronic personal neutron dosimetry and harsh environment detectors. A thorough direct performance comparison of the detection capabilities of semi-insulating silicon carbide (SiC–SI), single crystal diamond (D–SC), polycrystalline diamond (D–PC) and a self-biased epitaxial silicon carbide (SiC–EP) detector has been conducted and benchmarked against a commercial silicon PIN (Si–PIN) diode, in a wide range of alpha (Am-241), beta (Sr/Y-90), ionizing photon (65 keV to 1332 keV) and neutron radiation fields (including 1.2 MeV to 16.5 MeV mono-energetic neutrons, as well as neutrons from AmBe and Cf-252 sources). All detectors were shown to be able to directly detect and distinguish both the different radiation types and energies by using a simple energy threshold discrimination method. The SiC devices demonstrated the best neutron energy discrimination ratio (E\\max (n=5 MeV)/E\\max (n=1 MeV)  ≈5), whereas a superior neutron/photon cross-sensitivity ratio was observed in the D–PC detector (E\\max (AmBe)/E\\max (Co-60)  ≈16). Further work also demonstrated that the cross-sensitivity ratios can be improved through use of a simple proton-recoil conversion layer. Stability issues were also observed in the D–SC, D–PC and SiC–SI detectors while under irradiation, namely a change of energy peak position and/or count rate with time (often referred to as the polarization effect). This phenomenon within the detectors was non-debilitating over the time period tested (> 5 h) and, as such, stable

  4. Development of a model of silicon carbide thermodestruction for preparation of graphite layers

    Science.gov (United States)

    Davydov, S. Yu.; Lebedev, A. A.; Smirnova, N. Yu.

    2009-03-01

    A three-stage scheme of the silicon carbide thermodestruction resulting in surface graphitization, which was proposed earlier (based on structural studies), is discussed. A theoretical analysis shows, however, that this process occurs in two stages, namely, thermodesorption of silicon atoms from the two outer Si-C bilayers followed by condensation of carbon atoms on the Si(0001) face of silicon carbide, thus giving rise to the formation of a two-dimensional graphite structure (graphene).

  5. Thermodynamics of Nucleation of Silicon Carbide Nanocrystals during Carbonization of Porous Silicon

    Directory of Open Access Journals (Sweden)

    Yu.S. Nagornov

    2016-10-01

    Full Text Available The formation of SiC nanocrystals of the cubic modification in the process of high-temperature carbonization of porous silicon has been analyzed. It has been shown that the surface energy of silicon nanoparticles and quantum filaments is released in the process of annealing and carbonization. The Monte Carlo simulation has shown that the released energy makes it possible to overcome the nucleation barrier and to form SiC nanocrystals.

  6. Size Dependence of Nanoscale Wear of Silicon Carbide.

    Science.gov (United States)

    Tangpatjaroen, Chaiyapat; Grierson, David; Shannon, Steve; Jakes, Joseph E; Szlufarska, Izabela

    2017-01-18

    Nanoscale, single-asperity wear of single-crystal silicon carbide (sc-SiC) and nanocrystalline silicon carbide (nc-SiC) is investigated using single-crystal diamond nanoindenter tips and nanocrystalline diamond atomic force microscopy (AFM) tips under dry conditions, and the wear behavior is compared to that of single-crystal silicon with both thin and thick native oxide layers. We discovered a transition in the relative wear resistance of the SiC samples compared to that of Si as a function of contact size. With larger nanoindenter tips (tip radius ≈ 370 nm), the wear resistances of both sc-SiC and nc-SiC are higher than that of Si. This result is expected from the Archard's equation because SiC is harder than Si. However, with the smaller AFM tips (tip radius ≈ 20 nm), the wear resistances of sc-SiC and nc-SiC are lower than that of Si, despite the fact that the contact pressures are comparable to those applied with the nanoindenter tips, and the plastic zones are well-developed in both sets of wear experiments. We attribute the decrease in the relative wear resistance of SiC compared to that of Si to a transition from a wear regime dominated by the materials' resistance to plastic deformation (i.e., hardness) to a regime dominated by the materials' resistance to interfacial shear. This conclusion is supported by our AFM studies of wearless friction, which reveal that the interfacial shear strength of SiC is higher than that of Si. The contributions of surface roughness and surface chemistry to differences in interfacial shear strength are also discussed.

  7. Reaction-Based SiC Materials for Joining Silicon Carbide Composites for Fusion Energy

    Energy Technology Data Exchange (ETDEWEB)

    Lewinsohn, Charles A.; Jones, Russell H.; Singh, M.; Serizawa, H.; Katoh, Y.; Kohyama, A.

    2000-09-01

    The fabrication of large or complex silicon carbide-fiber-reinforced silicon carbide (SiC/SiC) components for fusion energy systems requires a method to assemble smaller components that are limited in size by manufacturing constraints. Previous analysis indicates that silicon carbide should be considered as candidate joint materials. Two methods to obtain SiC joints rely on a reaction between silicon and carbon to produce silicon carbide. This report summarizes preliminary mechanical properties of joints formed by these two methods. The methods appear to provide similar mechanical properties. Both the test methods and materials are preliminary in design and require further optimization. In an effort to determine how the mechanical test data is influenced by the test methodology and specimen size, plans for detailed finite element modeling (FEM) are presented.

  8. Silicon-Carbide Power MOSFET Performance in High Efficiency Boost Power Processing Unit for Extreme Environments

    Science.gov (United States)

    Ikpe, Stanley A.; Lauenstein, Jean-Marie; Carr, Gregory A.; Hunter, Don; Ludwig, Lawrence L.; Wood, William; Del Castillo, Linda Y.; Fitzpatrick, Fred; Chen, Yuan

    2016-01-01

    Silicon-Carbide device technology has generated much interest in recent years. With superior thermal performance, power ratings and potential switching frequencies over its Silicon counterpart, Silicon-Carbide offers a greater possibility for high powered switching applications in extreme environment. In particular, Silicon-Carbide Metal-Oxide- Semiconductor Field-Effect Transistors' (MOSFETs) maturing process technology has produced a plethora of commercially available power dense, low on-state resistance devices capable of switching at high frequencies. A novel hard-switched power processing unit (PPU) is implemented utilizing Silicon-Carbide power devices. Accelerated life data is captured and assessed in conjunction with a damage accumulation model of gate oxide and drain-source junction lifetime to evaluate potential system performance at high temperature environments.

  9. Graphitic nanostripes in silicon carbide surfaces created by swift heavy ion irradiation.

    Science.gov (United States)

    Ochedowski, Oliver; Osmani, Orkhan; Schade, Martin; Bussmann, Benedict Kleine; Ban-d'Etat, Brigitte; Lebius, Henning; Schleberger, Marika

    2014-06-06

    The controlled creation of defects in silicon carbide represents a major challenge. A well-known and efficient tool for defect creation in dielectric materials is the irradiation with swift (E(kin) ≥ 500 keV/amu) heavy ions, which deposit a significant amount of their kinetic energy into the electronic system. However, in the case of silicon carbide, a significant defect creation by individual ions could hitherto not be achieved. Here we present experimental evidence that silicon carbide surfaces can be modified by individual swift heavy ions with an energy well below the proposed threshold if the irradiation takes place under oblique angles. Depending on the angle of incidence, these grooves can span several hundreds of nanometres. We show that our experimental data are fully compatible with the assumption that each ion induces the sublimation of silicon atoms along its trajectory, resulting in narrow graphitic grooves in the silicon carbide matrix.

  10. TRANSFORMATIONS IN NANO-DIAMONDS WITH FORMATION OF NANO-POROUS SILICON CARBIDE AT HIGH PRESSURE

    Directory of Open Access Journals (Sweden)

    V. N. Kovalevsky

    2010-01-01

    Full Text Available The paper contains investigations on regularities of diamond - silicon carbide composite structure formation at impact-wave excitation. It has been determined that while squeezing a porous blank containing Si (SiC nano-diamond by explosive detonation products some processes are taking place such as diamond nano-particles consolidation, reverse diamond transition into graphite, fragments formation from silicon carbide. A method for obtaining high-porous composites with the presence of ultra-disperse diamond particles has been developed. Material with three-dimensional high-porous silicon-carbide structure has been received due to nano-diamond graphitation at impact wave transmission and plastic deformation. The paper reveals nano-diamonds inverse transformation into graphite and its subsequent interaction with the silicon accompanied by formation of silicon-carbide fragments with dimensions of up to 100 nm.

  11. Methods of depositing an alpha-silicon-carbide-containing film at low temperature

    Energy Technology Data Exchange (ETDEWEB)

    Habermehl, Scott D.

    2017-01-17

    Described methods are useful for depositing a silicon carbide film including Alpha-SiC at low temperatures (e.g., below about 1400.degree. C.), and resulting multi-layer structures and devices. A method includes introducing a chlorinated hydrocarbon gas and a chlorosilicon gas into a reaction chamber, and reacting the chlorinated hydrocarbon gas with the chlorosilicon gas at a temperature of less than about 1400.degree. C. to grow the silicon carbide film. The silicon carbide film so-formed includes Alpha-SiC.

  12. Broadband antireflective silicon carbide surface produced by cost-effective method

    DEFF Research Database (Denmark)

    Argyraki, Aikaterini; Ou, Yiyu; Ou, Haiyan

    2013-01-01

    A cost-effective method for fabricating antireflective subwavelength structures on silicon carbide is demonstrated. The nanopatterning is performed in a 2-step process: aluminum deposition and reactive ion etching. The effect, of the deposited aluminum film thickness and the reactive ion etching...... conditions, on the average surface reflectance and nanostructure landscape have been investigated systematically. The average reflectance of silicon carbide surface is significantly suppressed from 25.4% to 0.05%, under the optimal experimental conditions, in the wavelength range of 390-784 nm. The presence...... of stochastic nanostructures also changes the wetting properties of silicon carbide surface from hydrophilic (47°) to hydrophobic (108°)....

  13. Silicon Carbide Diodes Performance Characterization at High Temperatures

    Science.gov (United States)

    Lebron-Velilla, Ramon C.; Schwarze, Gene E.; Gardner, Brent G.; Adams, Jerry

    2004-01-01

    NASA Glenn Research center's Electrical Systems Development branch is working to demonstrate and test the advantages of Silicon Carbide (SiC) devices in actual power electronics applications. The first step in this pursuit is to obtain commercially available SiC Schottky diodes and to individually test them under both static and dynamic conditions, and then compare them with current state of the art silicon Schottky and ultra fast p-n diodes of similar voltage and current ratings. This presentation covers the results of electrical tests performed at NASA Glenn. Steady state forward and reverse current-volt (I-V) curves were generated for each device to compare performance and to measure their forward voltage drop at rated current, as well as the reverse leakage current at rated voltage. In addition, the devices were individually connected as freewheeling diodes in a Buck (step down) DC to DC converter to test their reverse recovery characteristics and compare their transient performance in a typical converter application. Both static and transient characterization tests were performed at temperatures ranging from 25 C to 300 C, in order to test and demonstrate the advantages of SiC over Silicon at high temperatures.

  14. Low Cost Fabrication of Silicon Carbide Based Ceramics and Fiber Reinforced Composites

    Science.gov (United States)

    Singh, M.; Levine, S. R.

    1995-01-01

    A low cost processing technique called reaction forming for the fabrication of near-net and complex shaped components of silicon carbide based ceramics and composites is presented. This process consists of the production of a microporous carbon preform and subsequent infiltration with liquid silicon or silicon-refractory metal alloys. The microporous preforms are made by the pyrolysis of a polymerized resin mixture with very good control of pore volume and pore size thereby yielding materials with tailorable microstructure and composition. Mechanical properties (elastic modulus, flexural strength, and fracture toughness) of reaction-formed silicon carbide ceramics are presented. This processing approach is suitable for various kinds of reinforcements such as whiskers, particulates, fibers (tows, weaves, and filaments), and 3-D architectures. This approach has also been used to fabricate continuous silicon carbide fiber reinforced ceramic composites (CFCC's) with silicon carbide based matrices. Strong and tough composites with tailorable matrix microstructure and composition have been obtained. Microstructure and thermomechanical properties of a silicon carbide (SCS-6) fiber reinforced reaction-formed silicon carbide matrix composites are discussed.

  15. Silicon carbide-silicon as a support material for oxygen evolution reaction in PEM steam electrolysers

    DEFF Research Database (Denmark)

    Nikiforov, Aleksey; Petrushina, Irina; Christensen, Erik;

    , cyclic voltammetry, SEM, EDX and steady state electrochemical polarisation in a working PEM steam electrolyser. Several SiC-Si-IrO2 electrodes have been prepared and tested. The iridium oxide content at the electrode active layer varied from x=0.2 to x=1, corresponding to the general formula (1-x...... technique and the average particle diameter of silicon carbide-silicon was found to be in the range of 5-10 µm, while its specific surface area was about 5 sq.m/g. The oxygen evolution reaction was studied by the cyclic voltammetry technique in 85% phosphoric acid solution at temperatures between 22 and 150...

  16. A Novel Compact and Reliable Hybrid Silicon/Silicon Carbide Device Module for Efficient Power Conversion Project

    Data.gov (United States)

    National Aeronautics and Space Administration — United Silicon Carbide, Inc. proposes to develop a novel compact, efficient and high-temperature power module, based on unique co-packaging approach of normally-off...

  17. Analytical potential for atomistic simulations of silicon, carbon, and silicon carbide

    Science.gov (United States)

    Erhart, Paul; Albe, Karsten

    2005-01-01

    We present an analytical bond-order potential for silicon, carbon, and silicon carbide that has been optimized by a systematic fitting scheme. The functional form is adopted from a preceding work [Phys. Rev. B 65, 195124 (2002)] and is built on three independently fitted potentials for SiSi , CC , and SiC interaction. For elemental silicon and carbon, the potential perfectly reproduces elastic properties and agrees very well with first-principles results for high-pressure phases. The formation enthalpies of point defects are reasonably reproduced. In the case of silicon stuctural features of the melt agree nicely with data taken from literature. For silicon carbide the dimer as well as the solid phases B1, B2, and B3 were considered. Again, elastic properties are very well reproduced including internal relaxations under shear. Comparison with first-principles data on point defect formation enthalpies shows fair agreement. The successful validation of the potentials for configurations ranging from the molecular to the bulk regime indicates the transferability of the potential model and makes it a good choice for atomistic simulations that sample a large configuration space.

  18. CARBON REMOVAL FROM METALLIC SILICON BY CARBIDE SETTLING FOR SOLAR GRADE SILICON PRODUCTION

    Directory of Open Access Journals (Sweden)

    Tiago Ramos Ribeiro

    2015-03-01

    Full Text Available The use of solar energy is growing sharply in the past years. The most used material for solar cells is high-purity silicon produced by refining low-purity silicon. With the increasing demand for photovoltaic components, new refining processes have been investigated. Carbon is one of the impurities to be removed and one possible removing technique is based on the settling of silicon carbide particles. Settling tests were carried out at 1,500°C during one and six hours. Results show that differences in settling time do not affect carbon removal significantly and that the carbon contents after settling are still higher than that required by standards for solar grade silicon (43 ppm. Results from this work and from literature show that settling is not a feasible processing step for carbon removal to the level needed for photovoltaic applications.

  19. First principles defect energetics for simulations of silicon carbide under irradiation: Kinetic mechanisms of silicon di-interstitials

    Energy Technology Data Exchange (ETDEWEB)

    Liao, Ting [CEA, DEN, Service de Recherche de Métallurgie Physique, F-91191 Gif-sur-Yvette (France); Theory and Computation Group, Australian Institute for Bioengineering and Nanotechnology, The University of Queensland, Brisbane, QLD 4072 (Australia); Roma, Guido, E-mail: roma@uni-mainz.de [CEA, DEN, Service de Recherche de Métallurgie Physique, F-91191 Gif-sur-Yvette (France); Institut für Anorganische Chemie und Analytische Chemie, Johannes Gutenberg Universität, D-55128 Mainz (Germany)

    2014-05-01

    Understanding the modification of the properties of silicon carbide under irradiation from the very fundamental point of view of atomic bonds and electronic structure can become possible in the next few years, thanks to the effort made in the last two decades to understand point defects from first principles calculations, but also thanks to the coupling of these results with simulation tools designed to describe larger spatial (and temporal) scales. We discuss some of the missing tiles that would allow to advance in this direction, in particular the incomplete data on defect clusters, and we present some first principles results for small silicon aggregates. We examine the stability, migration and structural evolution of Si di-interstitials in SiC. A triangular configuration is found to be the most stable in cubic SiC. Relatively small energy barriers, ranging from 0.25 to 1.2 eV, are found for the transformation of Si di-interstitials through reorientations, migration, and compact to extended transitions. We discuss the source of errors affecting our calculations as well as previous published results, which are still non-negligible.

  20. Application of silicon carbide to synchrotron-radiation mirrors

    Energy Technology Data Exchange (ETDEWEB)

    Takacs, P.Z.; Hursman, T.L.; Williams, J.T.

    1983-09-01

    Damage to conventional mirror materials exposed to the harsh synchrotron radiation (SR) environment has prompted the SR user community to search for more suitable materials. Next-generation insertion devices, with their attendant flux increases, will make the problem of mirror design even more difficult. A parallel effort in searching for better materials has been underway within the laser community for several years. The technology for dealing with high thermal loads is highly developed among laser manufacturers. Performance requirements for laser heat exchangers are remarkably similar to SR mirror requirements. We report on the application of laser heat exchanger technology to the solution of typical SR mirror design problems. The superior performance of silicon carbide for laser applications is illustrated by various material trades studies, and its superior performance for SR applications is illustrated by means of model calculations.

  1. Interferometric measurements of silicon carbide mirrors at liquid helium temperature

    Science.gov (United States)

    Robb, Paul N.; Huff, Lynn W.; Forney, Paul B.; Petrovsky, Gury T.; Ljubarsky, Sergey V.; Khimitch, Yuri P.

    1995-10-01

    This paper presents the results of interferometric tests of two silicon carbide mirrors tested at room temperature and 6 K. The first mirror has a spherical f/1.73 surface, a diameter of 170 mm, and is of solid, plano-concave construction. The other mirror, a plano measuring 308 mm by 210 mm, is of lightweighted, closed-back construction. The mirrors were manufactured by the Vavilov State Optical Institute, St. Petersburg, Russia, and were loaned to Lockheed for these tests. Optical tests on both mirrors were performed using the Lockheed cryogenic optical test facility at liquid helium temperature and a Zygo Mark II interferometer. There was no change in the surface figure of the mirrors, within the test uncertainty of approximately plus or minus 0.02 waves at 0.6328-micrometer wavelength.

  2. A review on single photon sources in silicon carbide

    Science.gov (United States)

    Lohrmann, A.; Johnson, B. C.; McCallum, J. C.; Castelletto, S.

    2017-03-01

    This paper summarizes key findings in single-photon generation from deep level defects in silicon carbide (SiC) and highlights the significance of these individually addressable centers for emerging quantum applications. Single photon emission from various defect centers in both bulk and nanostructured SiC are discussed as well as their formation and possible integration into optical and electrical devices. The related measurement protocols, the building blocks of quantum communication and computation network architectures in solid state systems, are also summarized. This includes experimental methodologies developed for spin control of different paramagnetic defects, including the measurement of spin coherence times. Well established doping, and micro- and nanofabrication procedures for SiC may allow the quantum properties of paramagnetic defects to be electrically and mechanically controlled efficiently. The integration of single defects into SiC devices is crucial for applications in quantum technologies and we will review progress in this direction.

  3. Optical limiting effects in nanostructured silicon carbide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Borshch, A A; Starkov, V N; Volkov, V I; Rudenko, V I; Boyarchuk, A Yu [Institute of Physics, National Academy of Sciences of Ukraine, Kiev (Ukraine); Semenov, A V [Institute for Single Crystals of NAS of Ukraine (Ukraine)

    2013-12-31

    We present the results of experiments on the interaction of nanosecond laser radiation at 532 and 1064 nm with nanostructured silicon carbide thin films of different polytypes. We have found the effect of optical intensity limiting at both wavelengths. The intensity of optical limiting at λ = 532 nm (I{sub cl} ∼ 10{sup 6} W cm{sup -2}) is shown to be an order of magnitude less than that at λ = 1064 nm (I{sub cl} ∼ 10{sup 7} W cm{sup -2}). We discuss the nature of the nonlinearity, leading to the optical limiting effect. We have proposed a method for determining the amount of linear and two-photon absorption in material media. (nonlinear optical phenomena)

  4. Catalytic synthesis of silicon carbide preceramic polymers: Polycarbosilanes

    Energy Technology Data Exchange (ETDEWEB)

    Berry, D.H.

    1992-10-01

    Polycarbosilanes are the most successful and widely studied class of polymer precursors for silicon carbide, but traditional methods for their synthesis are inefficient and nonselective. This project is focused on developing transition metal catalysts for the synthesis of polycarbosilanes and other preceramic polymers. In recent work we have developed the first homogeneous transition metal catalysts for the dehydrogenative coupling of simple alkyl silanes to oligomeric and polymeric carbosilanes, H-(SiR[sub 2]CR[prime][sub 2])n-SiR[sub 3]. The coupling of alkylgermanes, however, yields the corresponding oligomeric poly(germanes) (Ge-Ge). Future work will help elucidate the mechanisms of these catalytic process, explore the use of hydrogen acceptors as reaction accelerators, and develop new and more active catalysts.

  5. Joining and Integration of Silicon Carbide for Turbine Engine Applications

    Science.gov (United States)

    Halbig, Michael C.; Singh, Mrityunjay; Coddington, Bryan; Asthana, Rajiv

    2010-01-01

    The critical need for ceramic joining and integration technologies is becoming better appreciated as the maturity level increases for turbine engine components fabricated from ceramic and ceramic matrix composite materials. Ceramic components offer higher operating temperatures and reduced cooling requirements. This translates into higher efficiencies and lower emissions. For fabricating complex shapes, diffusion bonding of silicon carbide (SiC) to SiC is being developed. For the integration of ceramic parts to the surrounding metallic engine system, brazing of SiC to metals is being developed. Overcoming the chemical, thermal, and mechanical incompatibilities between dissimilar materials is very challenging. This presentation will discuss the types of ceramic components being developed by researchers and industry and the benefits of using ceramic components. Also, the development of strong, crack-free, stable bonds will be discussed. The challenges and progress in developing joining and integration approaches for a specific application, i.e. a SiC injector, will be presented.

  6. Hydrothermal corrosion of silicon carbide joints without radiation

    Science.gov (United States)

    Koyanagi, Takaaki; Katoh, Yutai; Terrani, Kurt A.; Kim, Young-Jin; Kiggans, James O.; Hinoki, Tatsuya

    2016-12-01

    Hydrothermal corrosion of four types of the silicon carbide (SiC) to SiC plate joints were investigated under pressurized water reactor and boiling water reactor relevant chemical conditions without irradiation. The joints were formed by metal diffusion bonding using molybdenum or titanium interlayer, reaction sintering using Ti-Si-C system, and SiC nanopowder sintering. Most of the joints withstood the corrosion tests for five weeks. The recession of the SiC substrates was limited. Based on the recession of the bonding layers, it was concluded that all the joints except for the molybdenum diffusion bond are promising under the reducing environments without radiation. The SiC nanopowder sintered joint was the most corrosion tolerant under the oxidizing environment among the four joints.

  7. Joining of Silicon Carbide Through the Diffusion Bonding Approach

    Science.gov (United States)

    Halbig, Michael .; Singh, Mrityunjay

    2009-01-01

    In order for ceramics to be fully utilized as components for high-temperature and structural applications, joining and integration methods are needed. Such methods will allow for the fabrication the complex shapes and also allow for insertion of the ceramic component into a system that may have different adjacent materials. Monolithic silicon carbide (SiC) is a ceramic material of focus due to its high temperature strength and stability. Titanium foils were used as an interlayer to form diffusion bonds between chemical vapor deposited (CVD) SiC ceramics with the aid of hot pressing. The influence of such variables as interlayer thickness and processing time were investigated to see which conditions contributed to bonds that were well adhered and crack free. Optical microscopy, scanning electron microscopy, and electron microprobe analysis were used to characterize the bonds and to identify the reaction formed phases.

  8. Investigations of Interface Properties in Copper-Silicon Carbide Composites

    Directory of Open Access Journals (Sweden)

    Chmielewski M.

    2017-06-01

    Full Text Available This paper analyses the technological aspects of the interface formation in the copper-silicon carbide composite and its effect on the material’s microstructure and properties. Cu-SiC composites with two different volume content of ceramic reinforcement were fabricated by hot pressing (HP and spark plasma sintering (SPS technique. In order to protect SiC surface from its decomposition, the powder was coated with a thin tungsten layer using plasma vapour deposition (PVD method. Microstructural analyses provided by scanning electron microscopy revealed the significant differences at metal-ceramic interface. Adhesion force and fracture strength of the interface between SiC particles and copper matrix were measured. Thermal conductivity of composites was determined using laser flash method. The obtained results are discussed with reference to changes in the area of metal-ceramic boundary.

  9. The Effects of Metamorphism on Chondritic Diamond and Silicon Carbide

    Science.gov (United States)

    Russell, S. S.; Arden, J. W.; Pillinger, C. T.

    1992-07-01

    Presolar grains have now been studied in a considerable number of primitive meteorites so that it can be readily shown that the diamond/silicon carbide ratio is not constant (Fig. 1). To highlight some of the distinctions: the enstatite chondrite Indarch appears to be particularly enriched in SiC compared to its diamond content, whereas the CV3s are relatively SiC poor. The abundance of SiC content in CV3s, however, seems to depend strongly on the oxidation state; the highly oxidized Allende has much less SiC than the more reduced Vigarano. The differences seen in Fig. 1 imply either heterogeneity in the solar nebula, i.e., preferential inclusion of one of the components into different meteorite parent bodies or different destruction mechanisms for the two components. Alexander et al. (1990) and Huss (1990) noted that abundance of both diamond and silicon carbide in primitive chondritic meteorites declines with increasing petrologic type, perhaps indicating that these components are destroyed during metamorphism. In addition to the above observations, diamond and silicon carbide from different meteorite classes can be distinguished. The nitrogen content of the diamond varies considerably in a way that might be petrologic type dependent (Russell et al., 1991a). The combustion temperature of SiC in different samples is widely variable and the delta^13C measured for SiC from the CV3 meteorites is isotopically much lighter. The similarity in average delta^13C of SiC in the lowest petrologic type carbonaceous chondrites, Andrar 003 and Indarch (when it is known from ion probe studies that individual SiC grains are extraordinarily variable in ^12C/^13C), suggests that the interstellar mineral was well mixed in the parent body forming regions of the solar nebula (Russell et al., 1991b). Clearly understanding all these apparently unrelated facts is vital to unraveling the history of primitive parent bodies and their formation. Metamorphism must be involved after accretion

  10. Silicon carbide detector for laser-generated plasma radiation

    Science.gov (United States)

    Bertuccio, Giuseppe; Puglisi, Donatella; Torrisi, Lorenzo; Lanzieri, Claudio

    2013-05-01

    We present the performance of a Silicon Carbide (SiC) detector in the acquisition of the radiation emitted by laser generated plasmas. The detector has been employed in time of flight (TOF) configuration within an experiment performed at the Prague Asterix Laser System (PALS). The detector is a 5 mm2 area 100 nm thick circular Nisbnd SiC Schottky junction on a high purity 4Hsbnd SiC epitaxial layer 115 μm thick. Current signals from the detector with amplitudes up to 1.6 A have been measured, achieving voltage signals over 80 V on a 50 Ω load resistance with excellent signal to noise ratios. Resolution of few nanoseconds has been experimentally demonstrated in TOF measurements. The detector has operated at 250 V DC bias under extreme operating conditions with no observable performance degradation.

  11. Method of Assembling a Silicon Carbide High Temperature Anemometer

    Science.gov (United States)

    Okojie, Robert S. (Inventor); Fralick, Gustave C. (Inventor); Saad, George J. (Inventor)

    2004-01-01

    A high temperature anemometer includes a pair of substrates. One of the substrates has a plurality of electrodes on a facing surface, while the other of the substrates has a sensor cavity on a facing surface. A sensor is received in the sensor cavity, wherein the sensor has a plurality of bondpads, and wherein the bondpads contact the plurality of electrodes when the facing surfaces are mated with one another. The anemometer further includes a plurality of plug-in pins, wherein the substrate with the cavity has a plurality of trenches with each one receiving a plurality of plug-in pins. The plurality of plug-in pins contact the plurality of electrodes when the substrates are mated with one another. The sensor cavity is at an end of one of the substrates such that the sensor partially extends from the substrate. The sensor and the substrates are preferably made of silicon carbide.

  12. Silicon carbide, a semiconductor for space power electronics

    Science.gov (United States)

    Powell, J. A.; Matus, Lawrence G.

    1991-01-01

    After many years of promise as a high temperature semiconductor, silicon carbide (SiC) is finally emerging as a useful electronic material. Recent significant progress that has led to this emergence has been in the area of crystal growth and device fabrication technology. High quality of single-crystal SiC wafers, up to 25 mm in diameter, can now be produced routinely from boules grown by a high temperature (2700 K) sublimation process. Device fabrication processes, including chemical vapor deposition (CVD), in situ doping during CVD, reactive ion etching, oxidation, metallization, etc. have been used to fabricate p-n junction diodes and MOSFETs. The diode was operated to 870 K and the MOSFET to 770 K.

  13. Developments in silicon carbide for aircraft propulsion system applications

    Science.gov (United States)

    Przybylko, Stephen J.

    1993-06-01

    The physical and electrical properties of silicon carbide make it the foremost semiconductor material for high-temperature, radiation-resistant, and high-power electronic devices. These attributes make SiC particularly suitable for application to aircraft engines. Recent proof-of-concept efforts have verified SiC's potential. Field-effect transistors have shown high-temperature operating capability from 350 C to 650 C. JFETs, MOSFETs, and MESFETs have been fabricated. Ultraviolet photodiodes with high quantum efficiencies and extremely low dark currents have been fabricated and tested. Blue light-emitting diodes are for sale in production quantities as are one-inch diameter wafers. These developments have established a sufficient level of confidence to pursue the development of devices for aircraft-engine applications.

  14. High surface area silicon carbide-coated carbon aerogel

    Science.gov (United States)

    Worsley, Marcus A; Kuntz, Joshua D; Baumann, Theodore F; Satcher, Jr, Joe H

    2014-01-14

    A metal oxide-carbon composite includes a carbon aerogel with an oxide overcoat. The metal oxide-carbon composite is made by providing a carbon aerogel, immersing the carbon aerogel in a metal oxide sol under a vacuum, raising the carbon aerogel with the metal oxide sol to atmospheric pressure, curing the carbon aerogel with the metal oxide sol at room temperature, and drying the carbon aerogel with the metal oxide sol to produce the metal oxide-carbon composite. The step of providing a carbon aerogel can provide an activated carbon aerogel or provide a carbon aerogel with carbon nanotubes that make the carbon aerogel mechanically robust. Carbon aerogels can be coated with sol-gel silica and the silica can be converted to silicone carbide, improved the thermal stability of the carbon aerogel.

  15. Chemical, Electrical and Thermal Characterization of Nanoceramic Silicon Carbide

    Science.gov (United States)

    Martin, Hervie; Abunaemeh, Malek; Smith, Cydale; Muntele, Claudiu; Budak, Satilmish; Ila, Daryush

    2009-03-01

    Silicon carbide (SiC) is a lightweight high bandgap semiconductor material that can maintain dimensional and chemical stability in adverse environments and very high temperatures. These properties make it suitable for high temperature thermoelectric converters. At the Center for Irradiaton of Materials (CIM) we design, manufacture and fabricate nanoceramic SiC, and perform electrical, thermal and chemical characterization of the material using particle induced X-ray emission (PIXE), Rutherford backscattering spectroscopy (RBS), Seebeck coefficient, electrical conductivity, and thermal conductivity measurements to calculate its efficiency as a thermoelectric generator. We are looking to compare the electrical and thermal properties of SiC ceramics with some other materials used for the same purposes.

  16. Preparation of porous silicon carbide by combustion synthesis

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yu-min; ZHANG Jian-han; HAN Jie-cai

    2005-01-01

    Porous silicon carbide ceramics were prepared by combustion synthesis technique. SiC/TiC composite was gained by combustion reaction of Si, C and Ti. Thermodynamics analysis of Si-C-Ti system indicates that the content of TiC in products should be larger than 30%. The experimental results show that the content of Ti+C should be larger than 25% to achieve a complete combustion reaction. The X-ray diffractometry results show that the final products with a relative density of 45%-64% are composed of α-SiC, β-SiC, TiC and a small quantity of Si. The images of scanning electron microscopy show that the structures of grain in SiC based porous ceramics consist of particles with a few microns in size.

  17. High Strength Silicon Carbide Foams and Their Deformation Behavior

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Silicon carbide (SiC) foams with a continuously connected open-cell structure were prepared and characterized for their mechanical performance. The apparent densities of SiC foams were controlled between about 0.4 and 1.3 g/cm3, with corresponding compressive strengths ranging from about 13 to 60 MPa and flexural strengths from about 8 to 30 MPa. Compressive testing of the SiC foams yielded stress-strain curves with only one linear-elastic region, which is different from those reported on ceramic foams in literature. This can possibly be attributed to the existence of filaments with fine, dense and high strength microstructures. The SiC and the filaments respond homogeneously to applied loading.

  18. Analysis of Erbium and Vanadium Diffusion in Porous Silicon Carbide

    Directory of Open Access Journals (Sweden)

    Marina G. Mynbaeva

    2012-01-01

    Full Text Available Experimental data on diffusion of erbium and vanadium in porous and nonporous silicon carbide at 1700 and 2200°C have been used for modelling diffusion in porous SiC. It is shown that the consideration of pore structure modification under annealing via vacancy redistribution allows for satisfactory description of dopant diffusion. As expected, important contribution to the diffusion in the porous medium is found to be made by the walls of the pores: in SiC, the vacancy surface diffusion coefficient on the walls appears to exceed that in the bulk of the material by an order of magnitude. When thermal treatment transforms pore channels into closed voids, pathways for accelerated diffusion cease to exist and diffusion rates in porous and nonporous SiC become similar.

  19. Silicon carbide: a versatile material for biosensor applications.

    Science.gov (United States)

    Oliveros, Alexandra; Guiseppi-Elie, Anthony; Saddow, Stephen E

    2013-04-01

    Silicon carbide (SiC) has been around for more than 100 years as an industrial material and has found wide and varied applications because of its unique electrical and thermal properties. In recent years there has been increased attention to SiC as a viable material for biomedical applications. Of particular interest in this review is its potential for application as a biotransducer in biosensors. Among these applications are those where SiC is used as a substrate material, taking advantage of its surface chemical, tribological and electrical properties. In addition, its potential for integration as system on a chip and those applications where SiC is used as an active material make it a suitable substrate for micro-device fabrication. This review highlights the critical properties of SiC for application as a biosensor and reviews recent work reported on using SiC as an active or passive material in biotransducers and biosensors.

  20. Advanced Measurements of Silicon Carbide Ceramic Matrix Composites

    Energy Technology Data Exchange (ETDEWEB)

    Farhad Farzbod; Stephen J. Reese; Zilong Hua; Marat Khafizov; David H. Hurley

    2012-08-01

    Silicon carbide (SiC) is being considered as a fuel cladding material for accident tolerant fuel under the Light Water Reactor Sustainability (LWRS) Program sponsored by the Nuclear Energy Division of the Department of Energy. Silicon carbide has many potential advantages over traditional zirconium based cladding systems. These include high melting point, low susceptibility to corrosion, and low degradation of mechanical properties under neutron irradiation. In addition, ceramic matrix composites (CMCs) made from SiC have high mechanical toughness enabling these materials to withstand thermal and mechanical shock loading. However, many of the fundamental mechanical and thermal properties of SiC CMCs depend strongly on the fabrication process. As a result, extrapolating current materials science databases for these materials to nuclear applications is not possible. The “Advanced Measurements” work package under the LWRS fuels pathway is tasked with the development of measurement techniques that can characterize fundamental thermal and mechanical properties of SiC CMCs. An emphasis is being placed on development of characterization tools that can used for examination of fresh as well as irradiated samples. The work discuss in this report can be divided into two broad categories. The first involves the development of laser ultrasonic techniques to measure the elastic and yield properties and the second involves the development of laser-based techniques to measurement thermal transport properties. Emphasis has been placed on understanding the anisotropic and heterogeneous nature of SiC CMCs in regards to thermal and mechanical properties. The material properties characterized within this work package will be used as validation of advanced materials physics models of SiC CMCs developed under the LWRS fuels pathway. In addition, it is envisioned that similar measurement techniques can be used to provide process control and quality assurance as well as measurement of

  1. Investigation on the Effects of Titanium Diboride Particle Size on Radiation Shielding Properties of Titanium Diboride Reinforced Boron Carbide-Silicon Carbide Composites

    Directory of Open Access Journals (Sweden)

    A.O. Addemir

    2012-03-01

    Full Text Available Composite materials have wide application areas in industry. Boron Carbide is an important material for nuclear technology. Silicon carbide is a candidate material in the first wall and blankets of fusion power plants. Titanium diboride reinforced boron carbide-silicon carbide composites which were produced from different titanium diboride particle sizes and ratios were studied for searching of the behaviour against the gamma ray. Cs-137 gamma radioisotope was used as gamma source in the experiments which has a single gamma-peak at 0.662 MeV. Gamma transmission technique was used for the measurements. The effects of titanium diboride particle size on radiation attenuation of titanium diboride reinforced boron carbide-silicon carbide composites were evaluated in related with gamma transmission and the results of the experiments were interpreted and compared with each other. Composite materials have wide application areas in industry. Boron Carbide is an important material for nuclear technology. Silicon carbide is a candidate material in the first wall and blankets of fusion power plants. Titanium diboride reinforced boron carbide-silicon carbide composites which were produced from different titanium diboride particle sizes and ratios were studied for searching of the behaviour against the gamma ray. Cs-137 gamma radioisotope was used as gamma source in the experiments which has a single gamma-peak at 0.662 MeV. Gamma transmission technique was used for the measurements. The effects of titanium diboride particle size on radiation attenuation of titanium diboride reinforced boron carbide-silicon carbide composites were evaluated in related with gamma transmission and the results of the experiments were interpreted and compared with each other. Composite materials have wide application areas in industry. Boron Carbide is an important material for nuclear technology. Silicon carbide is a candidate material in the first wall and blankets of fusion

  2. The Affordable Pre-Finishing of Silicon Carbide for Optical Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Creare proposes to develop a novel, laser-assisted, pre-finishing process for chemical vapor deposition (CVD) coated silicon-carbide ceramics. Our innovation will...

  3. FUNCTIONALLY GRADED ALUMINA/MULLITE COATINGS FOR PROTECTION OF SILICON CARBIDE CERAMIC COMPONENTS FROM CORROSION

    Energy Technology Data Exchange (ETDEWEB)

    Prof. Stratis V. Sotirchos

    2001-02-01

    The main objective of this research project was the formulation of processes that can be used to prepare compositionally graded alumina/mullite coatings for protection from corrosion of silicon carbide components (monolithic or composite) used or proposed to be used in coal utilization systems (e.g., combustion chamber liners, heat exchanger tubes, particulate removal filters, and turbine components) and other energy-related applications. Since alumina has excellent resistance to corrosion but coefficient than silicon carbide, the key idea of this project has been to develop graded coatings with composition varying smoothly along their thickness between an inner (base) layer of mullite in contact with the silicon carbide component and an outer layer of pure alumina, which would function as the actual protective coating of the component. (Mullite presents very good adhesion towards silicon carbide and has thermal expansion coefficient very close to that of the latter.)

  4. The First JFET-based Silicon Carbide Active Pixel Sensor UV Imager Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Solar-blind ultraviolet (UV) imaging is critically important in the fields of space astronomy, national defense, and bio-chemistry. United Silicon Carbide, Inc....

  5. Silicon Carbide Lightweight Optics With Hybrid Skins for Large Cryo Telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Optical Physics Company (OPC) proposes to manufacture new silicon carbide (SiC) foam-based optics that are composite, athermal and lightweight (FOCAL) that provide...

  6. Low-Cost, Silicon Carbide Replication Technique for LWIR Mirror Fabrication Project

    Data.gov (United States)

    National Aeronautics and Space Administration — SSG proposes an innovative optical manufacturing approach that will enable the low-cost fabrication of lightweighted, Long Wave Infrared (LWIR) Silicon Carbide (SiC)...

  7. Novel Silicon Carbide Deep Ultraviolet Detectors: Device Modeling, Characterization, Design and Prototyping Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Silicon Carbide deep UV detectors can achieve large gains, high signal-to-noise ratios and solar-blind operation, with added benefits of smaller sizes, lower...

  8. The First JFET-Based Silicon Carbide Active Pixel Sensor UV Imager Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Solar-blind ultraviolet (UV) imaging is needed in the fields of astronomy, national defense, and bio-chemistry. United Silicon Carbide, Inc. proposes to develop a...

  9. Anisotropic interpolation method of silicon carbide oxidation growth rates for three-dimensional simulation

    Science.gov (United States)

    Šimonka, Vito; Nawratil, Georg; Hössinger, Andreas; Weinbub, Josef; Selberherr, Siegfried

    2017-02-01

    We investigate anisotropical and geometrical aspects of hexagonal structures of Silicon Carbide and propose a direction dependent interpolation method for oxidation growth rates. We compute three-dimensional oxidation rates and perform one-, two-, and three-dimensional simulations for 4H- and 6H-Silicon Carbide thermal oxidation. The rates of oxidation are computed according to the four known growth rate values for the Si- (0 0 0 1) , a- (1 1 2 bar 0) , m- (1 1 bar 0 0) , and C-face (0 0 0 1 bar) . The simulations are based on the proposed interpolation method together with available thermal oxidation models. We additionally analyze the temperature dependence of Silicon Carbide oxidation rates for different crystal faces using Arrhenius plots. The proposed interpolation method is an essential step towards highly accurate three-dimensional oxide growth simulations which help to better understand the anisotropic nature and oxidation mechanism of Silicon Carbide.

  10. Silicon Carbide Lightweight Optics With Hybrid Skins for Large Cryo Telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Optical Physics Company (OPC) has developed new silicon carbide (SiC) foam-based optics with hybrid skins that are composite, athermal and lightweight (FOCAL) that...

  11. Novel Silicon Carbide Deep Ultraviolet Detectors: Device Modeling, Characterization, Design and Prototyping Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Silicon Carbide deep UV detectors can achieve large gains, high signal-to-noise ratios and solar-blind operation, with added benefits of smaller sizes, lower...

  12. Silicon Carbide (SiC) Power Processing Unit (PPU) for Hall Effect Thrusters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this SBIR project, APEI, Inc. is proposing to develop a high efficiency, rad-hard 3.8 kW silicon carbide (SiC) Power Processing Unit (PPU) for Hall Effect...

  13. Ultra-Lightweight, High Efficiency Silicon-Carbide (SIC) Based Power Electronic Converters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In Phase I of this project, APEI, Inc. proved the feasibility of creating ultra-lightweight power converters (utilizing now emerging silicon carbide [SiC] power...

  14. Friction and wear behavior of single-crystal silicon carbide in sliding contact with various metals

    Science.gov (United States)

    Miyoshi, K.; Buckley, D. H.

    1978-01-01

    Sliding friction experiments were conducted with single-crystal silicon carbide in contact with various metals. Results indicate the coefficient of friction is related to the relative chemical activity of the metals. The more active the metal, the higher the coefficient of friction. All the metals examined transferred to silicon carbide. The chemical activity of the metal and its shear modulus may play important roles in metal-transfer, the form of the wear debris and the surface roughness of the metal wear scar. The more active the metal, and the less resistance to shear, the greater the transfer to silicon carbide and the rougher the wear scar on the surface of the metal. Hexagon-shaped cracking and fracturing formed by cleavage of both prismatic and basal planes is observed on the silicon carbide surface.

  15. Effect of filler addition on porosity and strength of polysiloxane-derived porous silicon carbide ceramics

    National Research Council Canada - National Science Library

    KUMAR, B. V. Manoj; EOM, Jung-Hye; KIM, Young-Wook

    2011-01-01

    Polycarbosilane (PCS) or silicon carbide (SiC) fillers were used as fillers in fabricating partially interconnected, open-cell porous SiC ceramics by carbothermal reduction of polysiloxane-derived SiOC and subsequent sintering process...

  16. 3C-Silicon Carbide Microresonators for Timing and Frequency Reference

    Directory of Open Access Journals (Sweden)

    Graham S. Wood

    2016-11-01

    Full Text Available In the drive to miniaturise and integrate reference oscillator components, microelectromechanical systems (MEMS resonators are excellent candidates to replace quartz crystals. Silicon is the most utilised resonator structural material due to its associated well-established fabrication processes. However, when operation in harsh environments is required, cubic silicon carbide (3C-SiC is an excellent candidate for use as a structural material, due to its robustness, chemical inertness and high temperature stability. In order to actuate 3C-SiC resonators, electrostatic, electrothermal and piezoelectric methods have been explored. Both electrothermal and piezoelectric actuation can be accomplished with simpler fabrication and lower driving voltages, down to 0.5 V, compared to electrostatic actuation. The vibration amplitude at resonance can be maximised by optimising the design and location of the electrodes. Electrical read out of the resonator can be performed with electrostatic or piezoelectric transduction. Finally, a great deal of research has focused on tuning the resonant frequency of a 3C-SiC resonator by adjusting the DC bias applied to the electrodes, with a higher (up to 160-times tuning range for electrothermal tuning compared to piezoelectric tuning. Electrothermal tuning lowers the frequency, while piezoelectric tuning can be used to raise the frequency.

  17. Rapid fabrication of a silicon modification layer on silicon carbide substrate.

    Science.gov (United States)

    Bai, Yang; Li, Longxiang; Xue, Donglin; Zhang, Xuejun

    2016-08-01

    We develop a kind of magnetorheological (MR) polishing fluid for the fabrication of a silicon modification layer on a silicon carbide substrate based on chemical theory and actual polishing requirements. The effect of abrasive concentration in MR polishing fluid on material removal rate and removal function shape is investigated. We conclude that material removal rate will increase and tends to peak value as the abrasive concentration increases to 0.3 vol. %, and the removal function profile will become steep, which is a disadvantage to surface frequency error removal at the same time. The removal function stability is also studied and the results show that the prepared MR polishing fluid can satisfy actual fabrication requirements. An aspheric reflective mirror of silicon carbide modified by silicon is well polished by combining magnetorheological finishing (MRF) using two types of MR polishing fluid and computer controlled optical surfacing (CCOS) processes. The surface accuracy root mean square (RMS) is improved from 0.087λ(λ=632.8  nm) initially to 0.020λ(λ=632.8  nm) in 5.5 h total and the tool marks resulting from MRF are negligible. The PSD analysis results also shows that the final surface is uniformly polished.

  18. Toward a Kinetic Model of Silicon Carbide Condensation in Type II Supernovae

    Science.gov (United States)

    Deneault, Ethan A. N.

    2017-01-01

    One of the most interesting types of dust grain extracted from terrestrial meteorites is the silicon carbide X-grain (SiC-X). These grains bear distinct isotopic signatures which classify them as supernova condensates, but their formation within the ejecta has not been well-studied. Using a kinetic chemistry network, we investigate possible pathways that lead to the formation of silicon carbide grains in the cooling outflows of type II supernovae.

  19. Application of Reaction-Bonded Silicon Carbide in Manufacturing of Spacecraft Combustion Chamber

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Silicon carbide (SiC) ceramics is a good structural ceramics material, which have a lot of excellent properties such as superior high-temperature strength up to a temperature of 1 350 ℃, chemical stability, good resistance to thermal shock and high abrasion resistance. The silicon carbide ceramics material has so far been used widely for manufacturing various components such as heat exchangers, rolls, rockets combustion chamber. Sintering of ceramics structural parts have many technological method, the reac...

  20. Process to produce silicon carbide fibers using a controlled concentration of boron oxide vapor

    Science.gov (United States)

    Barnard, Thomas Duncan (Inventor); Lipowitz, Jonathan (Inventor); Nguyen, Kimmai Thi (Inventor)

    2001-01-01

    A process for producing polycrystalline silicon carbide by heating an amorphous ceramic fiber that contains silicon and carbon in an environment containing boron oxide vapor. The boron oxide vapor is produced in situ by the reaction of a boron containing material such as boron carbide and an oxidizing agent such as carbon dioxide, and the amount of boron oxide vapor can be controlled by varying the amount and rate of addition of the oxidizing agent.

  1. Electronic properties of intrinsic and doped amorphous silicon carbide films

    Energy Technology Data Exchange (ETDEWEB)

    Vetter, M. [Departament d' Enginyeria Electronica, Universitat Politecnica de Catalunya, Gran Capita s/n, Modul C4, E-08034 Barcelona (Spain)]. E-mail: mvetter@eel.upc.edu; Voz, C. [Departament d' Enginyeria Electronica, Universitat Politecnica de Catalunya, Gran Capita s/n, Modul C4, E-08034 Barcelona (Spain); Ferre, R. [Departament d' Enginyeria Electronica, Universitat Politecnica de Catalunya, Gran Capita s/n, Modul C4, E-08034 Barcelona (Spain); Martin, I. [Departament d' Enginyeria Electronica, Universitat Politecnica de Catalunya, Gran Capita s/n, Modul C4, E-08034 Barcelona (Spain); Orpella, A. [Departament d' Enginyeria Electronica, Universitat Politecnica de Catalunya, Gran Capita s/n, Modul C4, E-08034 Barcelona (Spain); Puigdollers, J. [Departament d' Enginyeria Electronica, Universitat Politecnica de Catalunya, Gran Capita s/n, Modul C4, E-08034 Barcelona (Spain); Andreu, J. [Departament de Fisica Aplicada i Optica, Universitat de Barcelona, Av. Diagonal 647, E-08028 Barcelona (Spain); Alcubilla, R. [Departament d' Enginyeria Electronica, Universitat Politecnica de Catalunya, Gran Capita s/n, Modul C4, E-08034 Barcelona (Spain)

    2006-07-26

    Hydrogenated amorphous silicon carbide (a-SiC{sub x} : H) films have shown excellent surface passivation of crystalline silicon. With the aim of large area deposition of these films the influence of the rf plasma power was investigated. It is found that homogenous deposition with effective surface recombination velocity lower than 100 cms{sup -1} is possible up to 6'' diameter in a simple parallel plate reactor by optimizing deposition parameters. For application in solar cell processes the conductivity of these a-SiC{sub x} : H films might become of importance since good surface passivation results from field-effect passivation which needs an insulating dielectric layer. Therefore, the temperature dependence of the dark dc conductivity of these films was investigated in the temperature range from - 20 to 260 deg. C. Two transition temperatures, T {sub s}{approx}80 deg. C and T {sub s}{approx}170 deg. C, were found where conductivity increases, resp. decreases over-exponential. From Arrhenius plots activation energy (E {sub a}) and conductivity pre-factor ({sigma} {sub 0}) were calculated for a large number of samples with different composition. A correlation between E {sub a} and {sigma} {sub 0} was found giving a Meyer-Neldel relation with a slope of 59 mV, corresponding to a material characteristic temperature T {sub m} = 400 deg. C, and an intercept at {sigma} {sub 00} = 0.1 {omega}{sup -1}cm{sup -1}.

  2. Synthesis and investigation of silicon carbide nanowires by HFCVD method

    Indian Academy of Sciences (India)

    S H MORTAZAVI; M GHORANNEVISS; M DADASHBABA; R ALIPOUR

    2016-08-01

    Silicon carbide (SiC) nanowire has been fabricated by hot filament chemical vapour deposition (HFCVD) mechanism in the temperature range of 600–800$^{\\circ}$C. Synthesis is performed under vacuum in the atmospheres of hexamethyldisiloxane/alcohol (HMDSO/C2H5OH) vapour and hydrogen (H$_2$) gas mixture. In this research dependence of SiC properties on temperature is discussed. Morphology and structural properties of SiC nanowire grown on glass substrate were characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), energy diffraction spectrometer (EDX), and four-point probe (4PP). Also Mountains Map Premium (64-bit version)software is used to investigate morphological features of samples. In this context, the analysis of the motifs, depth histograms, statistical parameters, texture direction, fractal, and the peak count histograms of the nanostructuresurface of samples are carried out. According to analysis, SiC films had a good crystal quality without defects or low residual stress. We found that increasing substrate temperature increases silicon and oxygen doping amount. We also found that electrical resistivity and surface roughness increased by increasing substrate temperature. This study showed that SiC nanowires with high density grew on the free catalyst glass substrate, and the alignment of SiC nanowires decreased.

  3. Parallel microwave chemistry in silicon carbide reactor platforms: an in-depth investigation into heating characteristics.

    Science.gov (United States)

    Damm, Markus; Kappe, C Oliver

    2009-11-01

    The heating behavior of silicon carbide reaction platforms under 2.45 GHz microwave irradiation was investigated with the aid of online thermoimaging cameras and multiple-channel fiber-optic probe temperature sensors placed inside the wells/vials of the silicon carbide microtiter plates. Microwave irradiation leads to a rapid and homogeneous heating of the entire plate, with minimal deviations in the temperature recorded at different positions of the plate or inside the wells. In temperature-controlled experiments using dedicated multimode reactors, solvents with different microwave absorption characteristics can be heated in parallel in individual wells/vials of the silicon carbide plate reaching the same set temperature. Due to the large heat capacity and high thermal conductivity of silicon carbide, the plates are able to moderate any field inhomogeneities inside a microwave cavity. Although the heating of the plates can be performed extremely efficiently inside a microwave reactor, heating and synthetic applications can alternatively be carried out by applying conventional conductive heating of the silicon carbide plates on a standard hotplate. Due to the slower heating of the silicon carbide material under these conditions, somewhat longer reaction times will be required.

  4. Investigation of silicon/glass anodic bonding with PECVD silicon carbide as the intermediate layer

    Science.gov (United States)

    Tang, W.; Meng, B.; Su, W.; Zhang, H. X.

    2012-09-01

    This paper describes the study of the conventional silicon/glass anodic bonding with plasma enhanced chemical vapor deposited silicon carbide (PE-SiC) as the intermediate layer, in order to evaluate the feasibilities of applying PE-SiC as the device's passivation layer prior to the packaging bonding and construction layer based on the bond-and-transfer technique. It is found that the mechanism of this bonding is similar to the traditional anodic bonding. As the PE-SiC thickened, the bond strength declined; meanwhile, the leak rate remained at the same level with the silicon/glass bonding. Further experiments revealed that the bonding increased the interlayer's tensile stress by 70.7 MPa and diminished the stress gradient by 24.6 MPa µm-1.

  5. Threshold irradiation dose for amorphization of silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Snead, L.L.; Zinkle, S.J. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    The amorphization of silicon carbide due to ion and electron irradiation is reviewed with emphasis on the temperature-dependent critical dose for amorphization. The effect of ion mass and energy on the threshold dose for amorphization is summarized, showing only a weak dependence near room temperature. Results are presented for 0.56 MeV silicon ions implanted into single crystal 6H-SiC as a function of temperature and ion dose. From this, the critical dose for amorphization is found as a function of temperature at depths well separated from the implanted ion region. Results are compared with published data generated using electrons and xenon ions as the irradiating species. High resolution TEM analysis is presented for the Si ion series showing the evolution of elongated amorphous islands oriented such that their major axis is parallel to the free surface. This suggests that surface of strain effects may be influencing the apparent amorphization threshold. Finally, a model for the temperature threshold for amorphization is described using the Si ion irradiation flux and the fitted interstitial migration energy which was found to be {approximately}0.56 eV. This model successfully explains the difference in the temperature-dependent amorphization behavior of SiC irradiated with 0.56 MeV silicon ions at 1 x 10{sup {minus}3} dpa/s and with fission neutrons irradiated at 1 x 10{sup {minus}6} dpa/s irradiated to 15 dpa in the temperature range of {approximately}340 {+-} 10K.

  6. Cathodic stripping voltammetric determination of chromium in coastal waters on cubic Nano-titanium carbide loaded gold nanoparticles modified electrode

    Directory of Open Access Journals (Sweden)

    Haitao eHan

    2015-09-01

    Full Text Available The novel cubical nano-titanium carbide loaded gold nanoparticles modified electrode for selective and sensitive detection of trace chromium (Cr in coastal water was established based on a simple approach. Nano-titanium carbide is used as the typical cubical nanomaterial with wonderful catalytic activity towards the reduction of Cr(VI. Gold nanoparticles with excellent physical and chemical properties can facilitate electron transfer and enhance the catalytic activity of the modified electrode. Taking advantage of the synergistic effects of nano-titanium carbide and gold nanoparticles, the excellent cathodic signal responses for the stripping determination of Cr(VI can be obtained. The detection limit of this method is calculated as 2.08 μg L-1 with the linear calibration curve ranged from 5.2 to 1040 μg L-1. This analytical method can be used to detect Cr(VI effectively without using any complexing agent. The fabricated electrode was successfully applied for the detection of chromium in coastal waters collected from the estuary giving Cr concentrations between 12.48 and 22.88 μg L-1 with the recovery between 96% and 105%.

  7. A study of the applicability of gallium arsenide and silicon carbide as aerospace sensor materials

    Science.gov (United States)

    Hurley, John S.

    1990-01-01

    Most of the piezoresistive sensors, to date, are made of silicon and germanium. Unfortunately, such materials are severly restricted in high temperature environments. By comparing the effects of temperature on the impurity concentrations and piezoresistive coefficients of silicon, gallium arsenide, and silicon carbide, it is being determined if gallium arsenide and silicon carbide are better suited materials for piezoresistive sensors in high temperature environments. The results show that the melting point for gallium arsenide prevents it from solely being used in high temperature situations, however, when used in the alloy Al(x)Ga(1-x)As, not only the advantage of the wider energy band gas is obtained, but also the higher desire melting temperature. Silicon carbide, with its wide energy band gap and higher melting temperature suggests promise as a high temperature piezoresistive sensor.

  8. Synthesis of silicon carbide fibers from polycarbosilane by electrospinning method

    Science.gov (United States)

    Yue, Yuan

    Silicon carbide (SiC) is widely used in many fields due to its unique properties. Bulk SiC normally has a flexural strength of 500 -- 550 MPa, a Vickers hardness of ~27 GPa, a Young's modulus of 380 -- 430 GPa, and a thermal conductivity of approximately 120 W/mK. SiC fibers are of great interest since they are the good candidates for reinforcing ceramic matrix composites (CMCs) because of the weavability and high temperature strength of about two to three GPa at about 1000 °C. Silicon carbide fibers have been synthesized from polycarbosilane (PCS) with ~25 μm diameter using the melt-spinning method, followed by the curing and pyrolysis. In order to fabricate SiC fibers with small diameters, electrospinning method has been studied. The electrospinning technique is notable in that the fiber diameters can be controlled over a scale of nanometers to micrometers by controlling the processing parameters. However, there have only been limited studies of synthesis of silicon carbide fibers from polycarbosilane by electrospinning method. Moreover, there is no previous report for tensile strength testing of SiC fibers synthesized by electrospinning. The main objectives of this thesis are to study these problems. In this study, SiC fibers were obtained from polycarbosilane solutions using electrospinning method. In these solutions, dimethylformamide (DMF) and xylene were used as the solvents. The spinnability of the solutions was studied at different polycarbosilane concentrations, as were the ratios between DMF and xylene. The influence of electrospinning parameters such as voltage, flow rate and volume ratio of solvent on fiber diameter were studied. It was found that a minimal DMF content was ii required for the solutions to be spinnable for each PCS concentration. However, DMF content could not exceed 40% of the solvent volume, otherwise PCS could not be dissolved. The fiber diameters increased with increasing flow rate, and slightly decreased with increasing applied

  9. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ULTRAFINE WC/Co CEMENTED CARBIDES WITH CUBIC BORON NITRIDE AND Cr₃C₂ ADDITIONS

    Directory of Open Access Journals (Sweden)

    Genrong Zhang

    2016-03-01

    Full Text Available This study investigates the microstructure and mechanical properties of ultrafine tungsten carbide and cobalt (WC/Co cemented carbides with cubic boron nitride (CBN and chromium carbide (Cr₃C₂ fabricated by a hot pressing sintering process. This study uses samples with 8 wt% Co content and 7.5 vol% CBN content, and with different Cr₃C₂ content ranging from 0 to 0.30 wt%. Based on the experimental results, Cr₃C₂ content has a significant influence on inhibiting abnormal grain growth and decreasing grain size in cemented carbides. Near-full densification is possible when CBN-WC/Co with 0.25 wt% Cr₃C₂ is sintered at 1350°C and 20 MPa; the resulting material possesses optimal mechanical properties and density, with an acceptable Vickers hardness of 19.20 GPa, fracture toughness of 8.47 MPa.m1/2 and flexural strength of 564 MPa.u̇ Å k⃗

  10. Characterization of silicon carbide coatings on Zircaloy-4 substrates

    Science.gov (United States)

    Al-Olayyan, Yousif Abdullah

    The lifetime of light water reactor (LWR) fuels is limited by the corrosion and degradation of Zircaloy cladding in the high temperature and high pressure operating conditions. As the thickness of the oxide layer increases, stresses build up in the oxide layer due to density differences between the oxide and the zirconium metal which lead to degradation and spallation of the oxide layer. The main objective of this research is to form protective coatings on the Zircaloy clad to prevent or at least slow the oxidation which can allow higher burnup of the fuel resulting in major benefits in plant safety and economics. Silicon carbide was identified as a candidate protective coating to reduce the corrosion and degradation of Zircaloy cladding. Silicon carbide coatings were deposited on Zircaloy substrates using plasma-assisted chemical vapor deposition (PE-CVD) and were found to be amorphous as determined by X-ray analysis. Since the adhesion of the films to the substrate was the most important property of a coating, scratch tests were used to assess the adhesion. The effects of different parameters on the test results including residual stresses, plastic deformation and friction between the stylus and the surface are discussed. Critical loads, characterized by continuous delamination of the SiC coatings deposited on Zircaloy-4, occurred at 0.5--2.5 N. The experimental results indicated that all SiC coatings used in this project, without exception, showed an adhesive failure when tested by scratch and indentation tests. Plastic deformation of the substrate due to compressive stresses induced by the scratch stylus caused flaking of the films at the interface, which was attributed to the low interfacial toughness. The effects of film thickness and substrate surface treatment on the quality and adhesion of SiC coatings were studied in detail. Thick films (5mum) exhibited extensive cracking. The scratch tests indicated higher adhesion with intermediate substrate surface

  11. Silicon carbide-free graphene growth on silicon for lithium-ion battery with high volumetric energy density

    Science.gov (United States)

    Son, In Hyuk; Hwan Park, Jong; Kwon, Soonchul; Park, Seongyong; Rümmeli, Mark H.; Bachmatiuk, Alicja; Song, Hyun Jae; Ku, Junhwan; Choi, Jang Wook; Choi, Jae-man; Doo, Seok-Gwang; Chang, Hyuk

    2015-01-01

    Silicon is receiving discernable attention as an active material for next generation lithium-ion battery anodes because of its unparalleled gravimetric capacity. However, the large volume change of silicon over charge–discharge cycles weakens its competitiveness in the volumetric energy density and cycle life. Here we report direct graphene growth over silicon nanoparticles without silicon carbide formation. The graphene layers anchored onto the silicon surface accommodate the volume expansion of silicon via a sliding process between adjacent graphene layers. When paired with a commercial lithium cobalt oxide cathode, the silicon carbide-free graphene coating allows the full cell to reach volumetric energy densities of 972 and 700 Wh l−1 at first and 200th cycle, respectively, 1.8 and 1.5 times higher than those of current commercial lithium-ion batteries. This observation suggests that two-dimensional layered structure of graphene and its silicon carbide-free integration with silicon can serve as a prototype in advancing silicon anodes to commercially viable technology. PMID:26109057

  12. Silicon carbide-free graphene growth on silicon for lithium-ion battery with high volumetric energy density.

    Science.gov (United States)

    Son, In Hyuk; Hwan Park, Jong; Kwon, Soonchul; Park, Seongyong; Rümmeli, Mark H; Bachmatiuk, Alicja; Song, Hyun Jae; Ku, Junhwan; Choi, Jang Wook; Choi, Jae-Man; Doo, Seok-Gwang; Chang, Hyuk

    2015-06-25

    Silicon is receiving discernable attention as an active material for next generation lithium-ion battery anodes because of its unparalleled gravimetric capacity. However, the large volume change of silicon over charge-discharge cycles weakens its competitiveness in the volumetric energy density and cycle life. Here we report direct graphene growth over silicon nanoparticles without silicon carbide formation. The graphene layers anchored onto the silicon surface accommodate the volume expansion of silicon via a sliding process between adjacent graphene layers. When paired with a commercial lithium cobalt oxide cathode, the silicon carbide-free graphene coating allows the full cell to reach volumetric energy densities of 972 and 700 Wh l(-1) at first and 200th cycle, respectively, 1.8 and 1.5 times higher than those of current commercial lithium-ion batteries. This observation suggests that two-dimensional layered structure of graphene and its silicon carbide-free integration with silicon can serve as a prototype in advancing silicon anodes to commercially viable technology.

  13. Selective laser sintering of polymer-coated silicon carbide powders

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, J.C.; Vail, N.K.; Barlow, J.W.; Beaman, J.J.; Bourell, D.L.; Marcus, H.L. [Univ. of Texas, Austin, TX (United States)

    1995-05-01

    Selective Laser Sintering (SLS) produces three-dimensional objects directly from a computer-aided design (CAD) solid model, without part-specific tooling, by repeatedly depositing thin layers of fusible powder and selective sintering each layer to the next with a rastered, modulated, CO{sub 2} laser beam. This technology, originally intended to produce parts and patterns from powdered waxes and thermoplastics, can be extended through use of thermoplastic-coated inorganic powder to producing green shapes which contain metal or ceramic powder bound together with the thermoplastic. These shapes can be subsequently processed into metal, ceramic, or composite metal/ceramic parts by various methods. Generally, the strength of the green shape critically depends on the layer to layer fusion that is achieved. A model of the SLS process is presented that correctly estimates the sintering depths in poly(methyl methacrylate) (PMMA) and coated silicon carbide (SiC) powders that result from operating parameters including laser power, beam scanning speed, beam diameter, scan spacing, and temperature. Green part densities and strengths are found to correlate with a combination of parameters, termed the energy density, that arise naturally from consideration of the energy input to the powder bed.

  14. Porous Silicon Carbide/Carbon Composite Microspherules for Methane Storage

    Institute of Scientific and Technical Information of China (English)

    Fengbo Li; Qingli Qian; Shufeng Zhang; Fang Yan; Guoqing Yuan

    2007-01-01

    Porous silicon carbide/carbon (SiC/C) microspherules were prepared by the controlled heating treatment of polymer and silica hybrid precursors over 1000 ℃ in Ar/H2 stream. The resultant SiC/C composite shows improved physical properties such as excellent mechanical strength, regular physical form, and high packing density. Such improvement overcomes the main inherent problems encountered when using activated carbons as absorbents without sacrificing porosity properties. N2 sorption analysis shows that the SiC/C composite has a BET surface area of 1793 m2/g and a pore volume of 0.92 ml/g. Methane adsorption isotherm is determined by the conventional volumetric method at 25 ℃ and up to 7.0 MPa. On volumetric basis, the SiC/C composite microspherules show methane storage of 145 (V/V) at 3.5 MPa and 25 ℃. The combination of excellent physical properties and porosity properties in this SiC/C composite lends a great possibility to develop a competitive storage system for natural gas.

  15. Stable 600 °C silicon carbide MEMS pressure transducers

    Science.gov (United States)

    Okojie, Robert S.

    2007-04-01

    This paper presents a review of recent results of silicon carbide (SiC) piezoresistive pressure transducers that have been demonstrated to operate up to 600 °C. The results offer promise to extend pressure measurement to higher temperatures beyond the capability of conventional semiconductor pressure transducers. The development also provides three immediate significant technological benefits: i) wider frequency bandwidth (overcomes acoustic attenuation associated with pitot tubes), ii) accuracy (improved stable output at high temperature), and iii) reduced packaging complexity (no package cooling required). Operation at 600 °C provides immediate applications in military and commercial jet engines in which critical static and dynamic pressure measurements are performed to improve engine performance (i.e., reduced emission and combustor instabilities) and improved CFD code validation. The pressure sensor is packaged by a novel MEMS direct chip attach (MEMS-DCA) technique that eliminates the need for wire bonding, thereby removing some reliability issues encountered at high temperature. Generally, at 600 °C the full-scale output (FSO) of these transducers drops by about 50-65 % of the room temperature values, which can be compensated for with external signal conditioning circuitry.

  16. Processes and applications of silicon carbide nanocomposite fibers

    Science.gov (United States)

    Shin, D. G.; Cho, K. Y.; Jin, E. J.; Riu, D. H.

    2011-10-01

    Various types of SiC such as nanowires, thin films, foam, and continuous fibers have been developed since the early 1980s, and their applications have been expanded into several new applications, such as for gas-fueled radiation heater, diesel particulate filter (DPF), ceramic fiber separators and catalyst/catalyst supports include for the military, aerospace, automobile and electronics industries. For these new applications, high specific surface area is demanded and it has been tried by reducing the diameter of SiC fiber. Furthermore, functional nanocomposites show potentials in various harsh environmental applications. In this study, silicon carbide fiber was prepared through electrospinning of the polycarbosilane (PCS) with optimum molecular weight distribution which was synthesized by new method adopting solid acid catalyst such as ZSM-5 and γ-Al2O3. Functional elements such as aluminum, titanium, tungsten and palladium easily doped in the precursor fiber and remained in the SiC fiber after pyrolysis. The uniform SiC fibers were produced at the condition of spinning voltage over 20 kV from the PCS solution as the concentration of 1.3 g/ml in DMF/Toluene (3:7) and pyrolysis at 1200°C. Pyrolyzed products were processed into several interesting applications such as thermal batteries, hydrogen sensors and gas filters.

  17. Processes and applications of silicon carbide nanocomposite fibers

    Energy Technology Data Exchange (ETDEWEB)

    Shin, D G; Cho, K Y; Riu, D H [Nanomaterials Team, Korea Institute of Ceramic Engineering and Technology, 233-5 Gasan-dong, Guemcheon-gu, Seoul 153-801 (Korea, Republic of); Jin, E J, E-mail: dhriu15@seoultech.ac.kr [Battelle-Korea Laborotary, Korea University, Anamdong, Seongbuk-gu, Seoul (Korea, Republic of)

    2011-10-29

    Various types of SiC such as nanowires, thin films, foam, and continuous fibers have been developed since the early 1980s, and their applications have been expanded into several new applications, such as for gas-fueled radiation heater, diesel particulate filter (DPF), ceramic fiber separators and catalyst/catalyst supports include for the military, aerospace, automobile and electronics industries. For these new applications, high specific surface area is demanded and it has been tried by reducing the diameter of SiC fiber. Furthermore, functional nanocomposites show potentials in various harsh environmental applications. In this study, silicon carbide fiber was prepared through electrospinning of the polycarbosilane (PCS) with optimum molecular weight distribution which was synthesized by new method adopting solid acid catalyst such as ZSM-5 and {gamma}-Al{sub 2}O{sub 3}. Functional elements such as aluminum, titanium, tungsten and palladium easily doped in the precursor fiber and remained in the SiC fiber after pyrolysis. The uniform SiC fibers were produced at the condition of spinning voltage over 20 kV from the PCS solution as the concentration of 1.3 g/ml in DMF/Toluene (3:7) and pyrolysis at 1200deg. C. Pyrolyzed products were processed into several interesting applications such as thermal batteries, hydrogen sensors and gas filters.

  18. Silicon carbide DC-DC multilevel Cuk converter

    Science.gov (United States)

    Almalaq, Yasser; Alateeq, Ayoob; Matin, Mohammad

    2016-09-01

    In this paper, DC-DC multilevel cuk converter using silicon carbide (SiC) Components is presented. Cuk converter gives output voltage with negative polarity. This topology is useful for applications require high gain with limitation on duty cycle. The gain of the design can be enhanced by increasing the number of multiplier level (N). This relation between the gain and the number of levels is the major advantage of this multilevel cuk converter. In the proposed cuk converter, a single SiC MOSFET, 2N-1 SiC schottky diodes, 2N capacitors, 2 inductors, and single input voltage are used to supply a load with negative polarity. 300V input voltage, 50KHz switching frequency, and 75% duty cycle are the main parameters used in the design. The output parameters are 3KW power and -5.7 KV voltage. Because this design can be used in applications which temperature plays a critical role, the relation between increasing temperature and output voltage and power are tested. The design is simulated using LTspice software and the results are discussed.

  19. EUV nanosecond laser ablation of silicon carbide, tungsten and molybdenum

    Science.gov (United States)

    Frolov, Oleksandr; Kolacek, Karel; Schmidt, Jiri; Straus, Jaroslav; Choukourov, Andrei; Kasuya, Koichi

    2015-09-01

    In this paper we present results of study interaction of nanosecond EUV laser pulses at wavelength of 46.9 nm with silicon carbide (SiC), tungsten (W) and molybdenum (Mo). As a source of laser radiation was used discharge-plasma driver CAPEX (CAPillary EXperiment) based on high current capillary discharge in argon. The laser beam is focused with a spherical Si/Sc multilayer-coated mirror on samples. Experimental study has been performed with 1, 5, 10, 20 and 50 laser pulses ablation of SiC, W and Mo at various fluence values. Firstly, sample surface modification in the nanosecond time scale have been registered by optical microscope. And the secondly, laser beam footprints on the samples have been analyzed by atomic-force microscope (AFM). This work supported by the Czech Science Foundation under Contract GA14-29772S and by the Grant Agency of the Ministry of Education, Youth and Sports of the Czech Republic under Contract LG13029.

  20. A silicon carbide room-temperature single-photon source

    Science.gov (United States)

    Castelletto, S.; Johnson, B. C.; Ivády, V.; Stavrias, N.; Umeda, T.; Gali, A.; Ohshima, T.

    2014-02-01

    Over the past few years, single-photon generation has been realized in numerous systems: single molecules, quantum dots, diamond colour centres and others. The generation and detection of single photons play a central role in the experimental foundation of quantum mechanics and measurement theory. An efficient and high-quality single-photon source is needed to implement quantum key distribution, quantum repeaters and photonic quantum information processing. Here we report the identification and formation of ultrabright, room-temperature, photostable single-photon sources in a device-friendly material, silicon carbide (SiC). The source is composed of an intrinsic defect, known as the carbon antisite-vacancy pair, created by carefully optimized electron irradiation and annealing of ultrapure SiC. An extreme brightness (2×106 counts s-1) resulting from polarization rules and a high quantum efficiency is obtained in the bulk without resorting to the use of a cavity or plasmonic structure. This may benefit future integrated quantum photonic devices.

  1. CLASSiC: Cherenkov light detection with silicon carbide

    Science.gov (United States)

    Adriani, Oscar; Albergo, Sebastiano; D'Alessandro, Raffaello; Lenzi, Piergiulio; Sciuto, Antonella; Starodubtsev, Oleksandr; Tricomi, Alessia

    2017-02-01

    We present the CLASSiC R&D for the development of a silicon carbide (SiC) based avalanche photodiode for the detection of Cherenkov light. SiC is a wide-bandgap semiconductor material, which can be used to make photodetectors that are insensitive to visible light. A SiC based light detection device has a peak sensitivity in the deep UV, making it ideal for Cherenkov light. Moreover, the visible blindness allows such a device to disentangle Cherenkov light and scintillation light in all those materials that scintillate above 400 nm. Within CLASSiC, we aim at developing a device with single photon sensitivity, having in mind two main applications. One is the use of the SiC APD in a new generation ToF PET scanner concept, using the Cherenov light emitted by the electrons following 511 keV gamma ray absorption as a time-stamp. Cherenkov is intrinsically faster than scintillation and could provide an unprecedentedly precise time-stamp. The second application concerns the use of SiC APD in a dual readout crystal based hadronic calorimeter, where the Cherenkov component is used to measure the electromagnetic fraction on an event by event basis. We will report on our progress towards the realization of the SiC APD devices, the strategies that are being pursued toward the realization of these devices and the preliminary results on prototypes in terms of spectral response, quantum efficiency, noise figures and multiplication.

  2. Synthesis of silicon carbide by carbothermal reduction of silica

    Energy Technology Data Exchange (ETDEWEB)

    Abel, J.L.; Ambrozio, F.; Beneduce, F. [Centro Universitario FEI, Itajuba, MG (Brazil); Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil)

    2009-07-01

    Full text: The production of silicon carbide (SiC) in an industrial scale still by carbothermal reduction of silica for its synthesis. This study aims to identify, in a comparative way, among the common reducers like petroleum coke, carbon black, charcoal and graphite the carbothermal reduction of silica from peat or organic soil. It is shown that peat, also occurs in nature together with high purity silica sand deposits, where the proximity of raw materials and their quality are key elements that determine the type, purity and cost of production of SiC. Tests were running from samples produced in the electric resistance furnace with controlled atmosphere at temperatures of 1550 deg C, 1600°C and 1650°C, both the precursors and products of reaction of carbothermal reduction were characterized by applying techniques of X-ray diffraction, scanning electron microscopy (SEM) and Energy- Dispersive X-ray analysis Spectroscopy (EDS). The results showed the formation of SiC for all common reducers, as well as for peat, but it was not possible to realize clearly the difference between them, being necessary, specific tests. (author)

  3. Solution growth of silicon carbide using unary chromium solvent

    Science.gov (United States)

    Miyasaka, Ryo; Kawanishi, Sakiko; Narumi, Taka; Sasaki, Hideaki; Yoshikawa, Takeshi; Maeda, Masafumi

    2017-02-01

    Solution growth of silicon carbide (SiC) using unary chromium (Cr) solvent was studied because the system enables a high solubility difference and a low degree of supersaturation, which would lead to rapid growth with a stabilized growth interface. The liquidus composition at SiC saturation in a quasi-binary Cr-SiC system was studied at 1823-2173 K. The measured carbon (C) contents are in good agreement with the thermodynamic evaluation using the sub-regular solution model. In addition, growth experiments using a unary Cr solvent were performed by the bottom-seeded travelling solvent method. The obtained growth rates at 1803-1923 K with a temperature difference of 15-70 K were proportional to the solubility difference between the seed and source temperatures, indicating that the growth was controlled by the mass transfer of C in the solution. The maximum growth rate of 720 μm/h at 1803 K was much higher than the growth rate by Si-rich solvents, suggesting that the Cr-rich solvent is suitable for the rapid growth at a low temperature.

  4. High Temperature Dynamic Pressure Measurements Using Silicon Carbide Pressure Sensors

    Science.gov (United States)

    Okojie, Robert S.; Meredith, Roger D.; Chang, Clarence T.; Savrun, Ender

    2014-01-01

    Un-cooled, MEMS-based silicon carbide (SiC) static pressure sensors were used for the first time to measure pressure perturbations at temperatures as high as 600 C during laboratory characterization, and subsequently evaluated in a combustor rig operated under various engine conditions to extract the frequencies that are associated with thermoacoustic instabilities. One SiC sensor was placed directly in the flow stream of the combustor rig while a benchmark commercial water-cooled piezoceramic dynamic pressure transducer was co-located axially but kept some distance away from the hot flow stream. In the combustor rig test, the SiC sensor detected thermoacoustic instabilities across a range of engine operating conditions, amplitude magnitude as low as 0.5 psi at 585 C, in good agreement with the benchmark piezoceramic sensor. The SiC sensor experienced low signal to noise ratio at higher temperature, primarily due to the fact that it was a static sensor with low sensitivity.

  5. Grain boundary resistance to amorphization of nanocrystalline silicon carbide

    Science.gov (United States)

    Chen, Dong; Gao, Fei; Liu, Bo

    2015-11-01

    Under the C displacement condition, we have used molecular dynamics simulation to examine the effects of grain boundaries (GBs) on the amorphization of nanocrystalline silicon carbide (nc-SiC) by point defect accumulation. The results show that the interstitials are preferentially absorbed and accumulated at GBs that provide the sinks for defect annihilation at low doses, but also driving force to initiate amorphization in the nc-SiC at higher doses. The majority of surviving defects are C interstitials, as either C-Si or C-C dumbbells. The concentration of defect clusters increases with increasing dose, and their distributions are mainly observed along the GBs. Especially these small clusters can subsequently coalesce and form amorphous domains at the GBs during the accumulation of carbon defects. A comparison between displacement amorphized nc-SiC and melt-quenched single crystal SiC shows the similar topological features. At a dose of 0.55 displacements per atom (dpa), the pair correlation function lacks long range order, demonstrating that the nc-SiC is fully amorphilized.

  6. Silicon carbide as a basis for spaceflight optical systems

    Science.gov (United States)

    Curcio, Michael E.

    1994-09-01

    New advances in the areas of microelectronics and micro-mechanical devices have created a momentum in the development of lightweight, miniaturized, electro-optical space subsystems. The performance improvements achieved and new observational techniques developed as a result, have provided a basis for a new range of Small Explorer, Discovery-class and other low-cost mission concepts for space exploration. However, the ultimate objective of low-mass, inexpensive space science missions will only be achieved with a companion development in the areas of flight optical systems and sensor instrument benches. Silicon carbide (SiC) is currently emerging as an attractive technology to fill this need. As a material basis for reflective, flight telescopes and optical benches, SiC offers: the lightweight and stiffness characteristics of beryllium; glass-like inherent stability consistent with performance to levels of diffraction-limited visible resolution; superior thermal properties down to cryogenic temperatures; and an existing, commercially-based material and processing infrastructure like aluminum. This paper will describe the current status and results of on-going technology developments to utilize these material properties in the creation of lightweight, high- performing, thermally robust, flight optical assemblies. System concepts to be discussed range from an 18 cm aperture, 4-mirror, off-axis system weighing less than 2 kg to a 0.5 m, 15 kg reimager. In addition, results in the development of a thermally-stable, `GOES-like' scan mirror will be presented.

  7. Modal acoustic emission source determination in silicon carbide matrix composites

    Science.gov (United States)

    Morscher, G. N.

    2000-05-01

    Modal acoustic emission has been used to monitor damage accumulation in woven silicon carbide (SiC) fiber reinforced SiC matrix composites during tensile testing. There are several potential sources of damage in these systems including transverse matrix cracking, fiber/matrix interphase debonding and sliding, longitudinal cracks in between plies, and fiber breakage. In the past, it has been shown that modal AE is excellent at detecting when damage occurs and subsides, where the damage occurs along the length of the sample, and the loss in material stiffness as a consequence of damage accumulation. The next step is to determine the extent that modal AE can be used to identify specific physical sources. This study will discuss the status of this aim for this composite system. Individual events were analyzed and correlated to specific sources based on the characteristics of the received waveforms, e.g., frequency spectrum and energy, and when the event occurred during the stress-history of the tensile test. Post-test microstructural examination of the test specimens enabled some correlation between specific types of AE events and damage sources.

  8. Diesel Exhaust After-Treatment by Silicon Carbide Fiber Filter

    Directory of Open Access Journals (Sweden)

    Kazuhiro Yamamoto

    2014-04-01

    Full Text Available To reduce particulate matter (PM in diesel exhaust gas, a diesel particulate filter (DPF has been developed. The thermal durability of existing platinum catalyst-supported DPFs is inadequate. We are focusing on a non-catalytic after-treatment of silicon carbide (SiC fibers with highly thermal durability. In this study, we simulated the processes of soot deposition and oxidation. Results show that even in exhaust gas without soot, a complex flow pattern is observed. The porosity of the filter is not constant along the flow direction, and the pressure gradient varies. The friction factor is slightly larger than the predicted value by the empirical equation in uniform porous media flow. Since the soot deposition occurs inside the filter, the depth filtration by SiC fibers was confirmed. In addition, the effects of filter temperature and oxygen concentration are clearly revealed. That is, comparing the oxidation at 700 °C, the deposited soot amount at 1200 and 1400 °C is decreased by 60% and 92%, respectively. Raising the oxygen concentration from 10% to 20% increases the oxidation efficiency from 42% to 64%. Although more work is needed over a wide range of operating conditions, a combination of these two parameters is important to achieve the non-catalytic exhaust after-treatment.

  9. Developing a High Thermal Conductivity Fuel with Silicon Carbide Additives

    Energy Technology Data Exchange (ETDEWEB)

    baney, Ronald; Tulenko, James

    2012-11-20

    The objective of this research is to increase the thermal conductivity of uranium oxide (UO{sub 2}) without significantly impacting its neutronic properties. The concept is to incorporate another high thermal conductivity material, silicon carbide (SiC), in the form of whiskers or from nanoparticles of SiC and a SiC polymeric precursor into UO{sub 2}. This is expected to form a percolation pathway lattice for conductive heat transfer out of the fuel pellet. The thermal conductivity of SiC would control the overall fuel pellet thermal conductivity. The challenge is to show the effectiveness of a low temperature sintering process, because of a UO{sub 2}-SiC reaction at 1,377°C, a temperature far below the normal sintering temperature. Researchers will study three strategies to overcome the processing difficulties associated with pore clogging and the chemical reaction of SiC and UO{sub 2} at temperatures above 1,300°C:

  10. Picosecond Laser Machining of Deep Holes in Silicon Infi ltrated Silicon Carbide Ceramics

    Institute of Scientific and Technical Information of China (English)

    ZHANG Qing; WANG Chunhui; LIU Yongsheng; ZHANG Litong; CHENG Guanghua

    2015-01-01

    Silicon infi ltrated silicon carbide (Si-SiC) ceramics, as high hardness materials, are diffi cult to machine, especially drilling micro-holes. In this study, the interaction of picosecond laser pulses (1 ps at 1 030 nm) with Si-SiC ceramics was investigated. Variations of the diameter and depth of circular holes with the growth of the laser energy density were obtained. The results indicate that the increase of machining depth follows a nonlinear relation with the increasing of laser energy density, while the diameter has little change with that. Moreover, it is found that some debris and particles are deposited around and inside the holes and waviness is in the entrance and at walls of the holes after laser processing.

  11. Simple method for the growth of 4H silicon carbide on silicon substrate

    Science.gov (United States)

    Asghar, M.; Shahid, M. Y.; Iqbal, F.; Fatima, K.; Nawaz, Muhammad Asif; Arbi, H. M.; Tsu, R.

    2016-03-01

    In this study we report thermal evaporation technique as a simple method for the growth of 4H silicon carbide on p-type silicon substrate. A mixture of Si and C60 powder of high purity (99.99%) was evaporated from molybdenum boat. The as grown film was characterized by XRD, FTIR, UV-Vis Spectrophotometer and Hall Measurements. The XRD pattern displayed four peaks at 2Θ angles 28.550, 32.700, 36.100 and 58.900 related to Si (1 1 1), 4H-SiC (1 0 0), 4H-SiC (1 1 1) and 4H-SiC (2 2 2), respectively. FTIR, UV-Vis spectrophotometer and electrical properties further strengthened the 4H-SiC growth.

  12. Simple method for the growth of 4H silicon carbide on silicon substrate

    Directory of Open Access Journals (Sweden)

    M. Asghar

    2016-03-01

    Full Text Available In this study we report thermal evaporation technique as a simple method for the growth of 4H silicon carbide on p-type silicon substrate. A mixture of Si and C60 powder of high purity (99.99% was evaporated from molybdenum boat. The as grown film was characterized by XRD, FTIR, UV-Vis Spectrophotometer and Hall Measurements. The XRD pattern displayed four peaks at 2Θ angles 28.550, 32.700, 36.100 and 58.900 related to Si (1 1 1, 4H-SiC (1 0 0, 4H-SiC (1 1 1 and 4H-SiC (2 2 2, respectively. FTIR, UV-Vis spectrophotometer and electrical properties further strengthened the 4H-SiC growth.

  13. Effect of Heat Treatment on Silicon Carbide Based Joining Materials for Fusion Energy

    Energy Technology Data Exchange (ETDEWEB)

    Lewinsohn, Charles A.; Jones, Russell H.; Nozawa, T.; Kotani, M.; Kishimoto, H.; Katoh, Y.; Kohyama, A.

    2001-10-01

    Two general approaches to obtaining silicon carbide-based joint materials were used. The first method relies on reactions between silicon and carbon to form silicon carbide, or to bond silicon carbide powders together. The second method consists of pyrolysing a polycarbosilane polymer to yield an amorphous, covalently bonded material. In order to assess the long-term durability of the joint materials, various heat treatments were performed and the effects on the mechanical properties of the joints were measured. Although the joints derived from the polycarbosilane polymer were not the strongest, the value of strength measured was not affected by heat treatment. On the other hand, the value of the strength of the reaction-based joints was affected by heat treatment, indicating the presence of residual stresses or unreacted material subsequent to processing. Further investigation of reaction-based joining should consist of detailed microscopic studies; however, continued study of joints derived from polymers is also warranted.

  14. Test setup for long term reliability investigation of Silicon Carbide MOSFETs

    DEFF Research Database (Denmark)

    Baker, Nick; Munk-Nielsen, Stig; Beczkowski, Szymon

    2013-01-01

    Silicon Carbide MOSFETs are now widely available and have frequently been demonstrated to offer numerous advantages over Silicon based devices. However, reliability issues remain a significant concern in their realisation in commercial power electronic systems. In this paper, a test bench...... is designed that enables an accelerated power cycling test to be performed on packaged Silicon Carbide MOSFETs (TO-247) under realistic operating conditions. An accelerated power cycling test is then performed, with on-state resistance selected as the observed parameter to detect degradation. On......-state resistance is routinely monitored online through the use of an innovative voltage measurement system. The packaged Silicon Carbide MOSFET is shown to exhibit a 25% increase in on-state resistance as the device ages throughout its lifetime, with the test still on-going....

  15. Effects of space exposure on ion-beam-deposited silicon-carbide and boron-carbide coatings.

    Science.gov (United States)

    Keski-Kuha, R A; Blumenstock, G M; Fleetwood, C M; Schmitt, D R

    1998-12-01

    Two recently developed optical coatings, ion-beam-deposited silicon carbide and ion-beam-deposited boron carbide, are very attractive as coatings on optical components for instruments for space astronomy and earth sciences operating in the extreme-UV spectral region because of their high reflectivity, significantly higher than any conventional coating below 105 nm. To take full advantage of these coatings in space applications, it is important to establish their ability to withstand exposure to the residual atomic oxygen and other environmental effects at low-earth-orbit altitudes. The first two flights of the Surface Effects Sample Monitor experiments flown on the ORFEUS-SPAS and the CRISTA-SPAS Shuttle missions provided the opportunity to study the effects of space exposure on these materials. The results indicate a need to protect ion-beam-deposited silicon-carbide-coated optical components from environmental effects in a low-earth orbit. The boron-carbide thin-film coating is a more robust coating able to withstand short-term exposure to atomic oxygen in a low-earth-orbit environment.

  16. Preparation and characterization of polymer-derived amorphous silicon carbide with silicon-rich stoichiometry

    Energy Technology Data Exchange (ETDEWEB)

    Masuda, Takashi, E-mail: mtakashi@jaist.ac.jp [School of Material and Science, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan); Iwasaka, Akira [School of Material and Science, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan); Takagishi, Hideyuki [Faculty of Symbiotic System Science, Fukushima University, 1 Kanayagawa, Fukushima-shi, Fukushima 960-1296 (Japan); Shimoda, Tatsuya [School of Material and Science, Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan)

    2016-08-01

    Polydihydrosilane with pendant hexyl groups was synthesized to obtain silicon-rich amorphous silicon carbide (a-SiC) films via the solution route. Unlike conventional polymeric precursors, this polymer requires neither catalysts nor oxidation for its synthesis and cross-linkage. Therefore, the polymer provides sufficient purity for the fabrication of semiconducting a-SiC. Here, we investigated the correlation of Si/C stoichiometry between the polymer and the resultant a-SiC film. The structural, optical, and electrical properties of the films with various carbon contents were also explored. Experimental results suggested that the excess carbon that did not participate in Si−C configurations was decomposed and was evaporated during polymer-to-SiC conversion. Consequently, the upper limit of the carbon in resultant a-SiC film was < 50 at.%; namely, the polymer provided silicon-rich a-SiC, whereas the conventionally used polycarbosilane inevitably provides carbon-rich one. These features of this unusual polymer open up a frontier of polymer-derived SiC and solution-processed SiC electronics. - Highlights: • Polymeric precursor solution for silicon carbide (SiC) is synthesized. • Semiconducting amorphous SiC is prepared via solution route. • The excess carbon is decomposed during cross-linking resulting in Si-rich SiC films. • The grown SiC films contain substantial amount of hydrogen atoms as SiH{sub n}/CH{sub n} entities. • Presence of CH{sub n} entities induces dangling bonds, causing poor electrical properties.

  17. Ion-beam modifications of mechanical and dimensional properties of silicon carbide

    Science.gov (United States)

    Costantini, Jean-Marc; Kerbiriou, Xavier; Sauzay, Maxime; Thomé, Lionel

    2012-11-01

    3C-SiC single crystal epitaxial layers, 6H-SiC single crystal plates and α-SiC Hexoloy sinters were irradiated with 4.0 MeV Xe or 4.0 MeV Au ions at room temperature. Mechanical and dimensional evolutions of silicon carbide are studied by means of nano-indentation and step-height measurements which are correlated with Rutherford backscattering spectrometry and channelling (RBS/C) data in single crystals. Irradiation with Xe ions induces a total lattice disorder related to amorphization for a fluence of 1 × 1015 cm-2 in both polytypes. When complete amorphization is reached, around the same values of Young's modulus (˜350 GPa) and Berkovich hardness (˜27 GPa) are found in both polytypes. The out-of-plane expansion increases with irradiation dose and the saturation value measured in the amorphous layer (normalized to the projected range of the ions) is close to 20-25%. Modifications of macroscopic properties are mainly governed by the disordered fraction of the material in a two-step damage process. A similar behaviour of material evolution is found for the cubic and hexagonal polytypes, either in single crystals or sintered polycrystalline samples. Calculations of Young's modulus and volume swelling are carried out using the analytical (Reuss and Voigt) models of homogenization.

  18. Magnesium behavior and structural defects in Mg{sup +} ion implanted silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Weilin, E-mail: weilin.jiang@pnnl.gov [Pacific Northwest National Laboratory (United States); Jung, Hee Joon; Kovarik, Libor; Wang, Zhaoying; Roosendaal, Timothy J.; Zhu, Zihua; Edwards, Danny J.; Hu, Shenyang; Henager, Charles H.; Kurtz, Richard J. [Pacific Northwest National Laboratory (United States); Wang, Yongqiang [Los Alamos National Laboratory (United States)

    2015-03-15

    As a candidate material for fusion reactor applications, silicon carbide (SiC) undergoes transmutation reactions under high-energy neutron irradiation with magnesium as the major metallic transmutant; the others include aluminum, beryllium and phosphorus in addition to helium and hydrogen gaseous species. The impact of these transmutants on SiC structural stability is currently unknown. This study uses ion implantation to introduce Mg into SiC. Multiaxial ion-channeling analysis of the as-produced damage state indicates a lower dechanneling yield observed along the 〈1 0 0〉 axis. The microstructure of the annealed sample was examined using high-resolution scanning transmission electron microscopy. The results show a high concentration of likely non-faulted tetrahedral voids and possible stacking fault tetrahedra near the damage peak. In addition to lattice distortion, dislocations and intrinsic and extrinsic stacking faults are also observed. Magnesium in 3C–SiC prefers to substitute for Si and it forms precipitates of cubic Mg{sub 2}Si and tetragonal MgC{sub 2}. The diffusion coefficient of Mg in 3C–SiC single crystal at 1573 K has been determined to be 3.8 ± 0.4 × 10{sup −19} m{sup 2}/s.

  19. Magnesium behavior and structural defects in Mg+ ion implanted silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Weilin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jung, Hee Joon [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kovarik, Libor [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Zhaoying [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Roosendaal, Timothy J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhu, Zihua [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Edwards, Danny J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hu, Shenyang [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Henager, Charles H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kurtz, Richard J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Yongqiang [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-03-01

    As a candidate material for fusion reactor applications, silicon carbide (SiC) undergoes transmutation reactions under high-energy neutron irradiation with magnesium as the major metallic transmutant; the others include aluminum, beryllium and phosphorus in addition to helium and hydrogen gaseous species. The impact of these transmutants on SiC structural stability is currently unknown. This study uses ion implantation to introduce Mg into SiC. Multiaxial ion-channeling analysis of the as-produced damage state suggests that there are preferred Si <100> interstitial splits. The microstructure of the annealed sample was examined using high-resolution scanning transmission electron microscopy. The results show a high concentration of likely non-faulted tetrahedral voids and possible stacking fault tetrahedra near the damage peak. In addition to lattice distortion, dislocations and intrinsic and extrinsic stacking faults are also observed. Magnesium in 3C-SiC prefers to substitute for Si and it forms precipitates of cubic Mg2Si and tetragonal MgC2. The diffusion coefficient of Mg in 3C-SiC single crystal at 1573 K has been determined to be 3.8±0.4×10e-19 m2/sec.

  20. Magnesium behavior and structural defects in Mg+ ion implanted silicon carbide

    Science.gov (United States)

    Jiang, Weilin; Jung, Hee Joon; Kovarik, Libor; Wang, Zhaoying; Roosendaal, Timothy J.; Zhu, Zihua; Edwards, Danny J.; Hu, Shenyang; Henager, Charles H.; Kurtz, Richard J.; Wang, Yongqiang

    2015-03-01

    As a candidate material for fusion reactor applications, silicon carbide (SiC) undergoes transmutation reactions under high-energy neutron irradiation with magnesium as the major metallic transmutant; the others include aluminum, beryllium and phosphorus in addition to helium and hydrogen gaseous species. The impact of these transmutants on SiC structural stability is currently unknown. This study uses ion implantation to introduce Mg into SiC. Multiaxial ion-channeling analysis of the as-produced damage state indicates a lower dechanneling yield observed along the axis. The microstructure of the annealed sample was examined using high-resolution scanning transmission electron microscopy. The results show a high concentration of likely non-faulted tetrahedral voids and possible stacking fault tetrahedra near the damage peak. In addition to lattice distortion, dislocations and intrinsic and extrinsic stacking faults are also observed. Magnesium in 3C-SiC prefers to substitute for Si and it forms precipitates of cubic Mg2Si and tetragonal MgC2. The diffusion coefficient of Mg in 3C-SiC single crystal at 1573 K has been determined to be 3.8 ± 0.4 × 10-19 m2/s.

  1. Graphene as a Buffer Layer for Silicon Carbide-on-Insulator Structures

    Directory of Open Access Journals (Sweden)

    Kanji Yasui

    2012-11-01

    Full Text Available We report an innovative technique for growing the silicon carbide-on-insulator (SiCOI structure by utilizing polycrystalline single layer graphene (SLG as a buffer layer. The epitaxial growth was carried out using a hot-mesh chemical vapor deposition (HM-CVD technique. Cubic SiC (3C-SiC thin film in (111 domain was realized at relatively low substrate temperature of 750 °C. 3C-SiC energy bandgap of 2.2 eV was confirmed. The Si-O absorption band observed in the grown film can be caused by the out-diffusion of the oxygen atom from SiO2 substrate or oxygen doping during the cleaning process. Further experimental works by optimizing the cleaning process, growth parameters of the present growth method, or by using other growth methods, as well, are expected to realize a high quality SiCOI structure, thereby opening up the way for a breakthrough in the development of advanced ULSIs with multifunctionalities.

  2. Interfacial Engineering of Silicon Carbide Nanowire/Cellulose Microcrystal Paper toward High Thermal Conductivity.

    Science.gov (United States)

    Yao, Yimin; Zeng, Xiaoliang; Pan, Guiran; Sun, Jiajia; Hu, Jiantao; Huang, Yun; Sun, Rong; Xu, Jian-Bin; Wong, Ching-Ping

    2016-11-16

    Polymer composites with high thermal conductivity have attracted much attention, along with the rapid development of electronic devices toward higher speed and better performance. However, high interfacial thermal resistance between fillers and matrix or between fillers and fillers has been one of the primary bottlenecks for the effective thermal conduction in polymer composites. Herein, we report on engineering interfacial structure of silicon carbide nanowire/cellulose microcrystal paper by generating silver nanostructures. We show that silver nanoparticle-deposited silicon carbide nanowires as fillers can effectively enhance the thermal conductivity of the matrix. The in-plane thermal conductivity of the resultant composite paper reaches as high as 34.0 W/m K, which is one order magnitude higher than that of conventional polymer composites. Fitting the measured thermal conductivity with theoretical models qualitatively demonstrates that silver nanoparticles bring the lower interfacial thermal resistances both at silicon carbide nanowire/cellulose microcrystal and silicon carbide nanowire/silicon carbide nanowire interfaces. This interfacial engineering approach provides a powerful tool for sophisticated fabrication of high-performance thermal-management materials.

  3. Structural and electrical characterization of ohmic contacts to graphitized silicon carbide.

    Science.gov (United States)

    Maneshian, Mohammad H; Lin, Ming-Te; Diercks, David; Shepherd, Nigel D

    2009-12-09

    Titanium was deposited onto silicon carbide (6H-SiC) using the 248 nm line of an excimer laser in a vacuum of 10(-6) Torr, and ohmic contacts were formed by annealing the structure at approximately 1000 degrees C. Further anneals between 1350 and 1430 degrees C did not degrade the formed contacts, and Raman analysis confirmed that sublimation of silicon from the near surface layers of the silicon carbide between the contact pads resulted in graphene formation after 5 min, 1428 degrees C anneals. The graphene formation was accompanied by a significant enhancement of ohmic behavior, and, it was found to be sensitive to the temperature ramp-up rate and annealing time. High-resolution transmission electron microscopy showed that the interface between the metal and silicon carbide remained sharp and free of macroscopic defects even after 30 min, 1430 degrees C anneals. The interface was determined to be carbon rich by elemental analysis, which indicates metal carbide formation. The potential of this approach for achieving ohmic contacts and graphene formation on silicon carbide substrates is discussed. A mechanism for the sequential formation of ohmic contacts then graphene is proposed.

  4. Silicon Carbide Temperature Monitor Processing Improvements. Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Unruh, Troy Casey [Idaho National Lab. (INL), Idaho Falls, ID (United States); Daw, Joshua Earl [Idaho National Lab. (INL), Idaho Falls, ID (United States); Al Rashdan, Ahamad [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-01-29

    Silicon carbide (SiC) temperature monitors are used as temperature sensors in Advanced Test Reactor (ATR) irradiations at the Idaho National Laboratory (INL). Although thermocouples are typically used to provide real-time temperature indication in instrumented lead tests, other indicators, such as melt wires, are also often included in such tests as an independent technique of detecting peak temperatures incurred during irradiation. In addition, less expensive static capsule tests, which have no leads attached for real-time data transmission, often rely on melt wires as a post-irradiation technique for peak temperature indication. Melt wires are limited in that they can only detect whether a single temperature is or is not exceeded. SiC monitors are advantageous because a single monitor can be used to detect for a range of temperatures that occurred during irradiation. As part of the process initiated to make SiC temperature monitors available at the ATR, post-irradiation evaluations of these monitors have been previously completed at the High Temperature Test Laboratory (HTTL). INL selected the resistance measurement approach for determining irradiation temperature from SiC temperature monitors because it is considered to be the most accurate measurement. The current process involves the repeated annealing of the SiC monitors at incrementally increasing temperature, with resistivity measurements made between annealing steps. The process is time consuming and requires the nearly constant attention of a trained staff member. In addition to the expensive and lengthy post analysis required, the current process adds many potential sources of error in the measurement, as the sensor must be repeatedly moved from furnace to test fixture. This time-consuming post irradiation analysis is a significant portion of the total cost of using these otherwise inexpensive sensors. An additional consideration of this research is that, if the SiC post processing can be automated, it

  5. Silicon-Rich Silicon Carbide Hole-Selective Rear Contacts for Crystalline-Silicon-Based Solar Cells.

    Science.gov (United States)

    Nogay, Gizem; Stuckelberger, Josua; Wyss, Philippe; Jeangros, Quentin; Allebé, Christophe; Niquille, Xavier; Debrot, Fabien; Despeisse, Matthieu; Haug, Franz-Josef; Löper, Philipp; Ballif, Christophe

    2016-12-28

    The use of passivating contacts compatible with typical homojunction thermal processes is one of the most promising approaches to realizing high-efficiency silicon solar cells. In this work, we investigate an alternative rear-passivating contact targeting facile implementation to industrial p-type solar cells. The contact structure consists of a chemically grown thin silicon oxide layer, which is capped with a boron-doped silicon-rich silicon carbide [SiCx(p)] layer and then annealed at 800-900 °C. Transmission electron microscopy reveals that the thin chemical oxide layer disappears upon thermal annealing up to 900 °C, leading to degraded surface passivation. We interpret this in terms of a chemical reaction between carbon atoms in the SiCx(p) layer and the adjacent chemical oxide layer. To prevent this reaction, an intrinsic silicon interlayer was introduced between the chemical oxide and the SiCx(p) layer. We show that this intrinsic silicon interlayer is beneficial for surface passivation. Optimized passivation is obtained with a 10-nm-thick intrinsic silicon interlayer, yielding an emitter saturation current density of 17 fA cm(-2) on p-type wafers, which translates into an implied open-circuit voltage of 708 mV. The potential of the developed contact at the rear side is further investigated by realizing a proof-of-concept hybrid solar cell, featuring a heterojunction front-side contact made of intrinsic amorphous silicon and phosphorus-doped amorphous silicon. Even though the presented cells are limited by front-side reflection and front-side parasitic absorption, the obtained cell with a Voc of 694.7 mV, a FF of 79.1%, and an efficiency of 20.44% demonstrates the potential of the p(+)/p-wafer full-side-passivated rear-side scheme shown here.

  6. Combining graphene with silicon carbide: synthesis and properties - a review

    Science.gov (United States)

    Shtepliuk, Ivan; Khranovskyy, Volodymyr; Yakimova, Rositsa

    2016-11-01

    Being a true two-dimensional crystal, graphene possesses a lot of exotic properties that would enable unique applications. Integration of graphene with inorganic semiconductors, e.g. silicon carbide (SiC) promotes the birth of a class of hybrid materials which are highly promising for development of novel operations, since they combine the best properties of two counterparts in the frame of one hybrid platform. As a specific heterostructure, graphene on SiC performs strongly, dependent on the synthesis method and the growth modes. In this article, a comprehensive review of the most relevant studies of graphene growth methods and mechanisms on SiC substrates has been carried out. The aim is to elucidate the basic physical processes that are responsible for the formation of graphene on SiC. First, an introduction is made covering some intriguing and not so often discussed properties of graphene. Then, we focus on integration of graphene with SiC, which is facilitated by the nature of SiC to assume graphitization. Concerning the synthesis methods, we discuss thermal decomposition of SiC, chemical vapor deposition and molecular beam epitaxy, stressing that the first technique is the most common one when SiC substrates are used. In addition, we briefly appraise graphene synthesis via metal mediated carbon segregation. We address in detail the main aspects of the substrate effect, such as substrate face polarity, off-cut, kind of polytype and nonpolar surfaces on the growth of graphene layers. A comparison of graphene grown on the polar faces is made. In particular, growth of graphene on Si-face SiC is critically analyzed concerning growth kinetics and growth mechanisms taking into account the specific characteristics of SiC (0001) surfaces, such as the step-terrace structure and the unavoidable surface reconstruction upon heating. In all subtopics obstacles and solutions are featured. We complete the review with a short summary and concluding remarks.

  7. USE OF SILICON CARBIDE MONITORS IN ATR IRRADIATION TESTING

    Energy Technology Data Exchange (ETDEWEB)

    K. L. Davis; B. Chase; T. Unruh; D. Knudson; J. L. Rempe

    2012-07-01

    In April 2007, the Department of Energy (DOE) designated the Advanced Test Reactor (ATR) a National Scientific User Facility (NSUF) to advance US leadership in nuclear science and technology. By attracting new users from universities, laboratories, and industry, the ATR will support basic and applied nuclear research and development and help address the nation's energy security needs. In support of this new program, the Idaho National Laboratory (INL) has developed in-house capabilities to fabricate, test, and qualify new and enhanced temperature sensors for irradiation testing. Although most efforts emphasize sensors capable of providing real-time data, selected tasks have been completed to enhance sensors provided in irradiation locations where instrumentation leads cannot be included, such as drop-in capsule and Hydraulic Shuttle Irradiation System (HSIS) or 'rabbit' locations. For example, silicon carbide (SiC) monitors are now available to detect peak irradiation temperatures between 200°C and 800°C. Using a resistance measurement approach, specialized equipment installed at INL's High Temperature Test Laboratory (HTTL) and specialized procedures were developed to ensure that accurate peak irradiation temperature measurements are inferred from SiC monitors irradiated at the ATR. Comparison examinations were completed by INL to demonstrate this capability, and several programs currently rely on SiC monitors for peak temperature detection. This paper discusses the use of SiC monitors at the ATR, the process used to evaluate them at the HTTL, and presents representative measurements taken using SiC monitors.

  8. A silicon carbide nanowire field effect transistor for DNA detection.

    Science.gov (United States)

    Fradetal, L; Bano, E; Attolini, G; Rossi, F; Stambouli, V

    2016-06-10

    This work reports on the label-free electrical detection of DNA molecules for the first time, using silicon carbide (SiC) as a novel material for the realization of nanowire field effect transistors (NWFETs). SiC is a promising semiconductor for this application due to its specific characteristics such as chemical inertness and biocompatibility. Non-intentionally n-doped SiC NWs are first grown using a bottom-up vapor-liquid-solid (VLS) mechanism, leading to the NWs exhibiting needle-shaped morphology, with a length of approximately 2 μm and a diameter ranging from 25 to 60 nm. Then, the SiC NWFETs are fabricated and functionalized with DNA molecule probes via covalent coupling using an amino-terminated organosilane. The drain current versus drain voltage (I d-V d) characteristics obtained after the DNA grafting and hybridization are reported from the comparative and simultaneous measurements carried out on the SiC NWFETs, used either as sensors or references. As a representative result, the current of the sensor is lowered by 22% after probe DNA grafting and by 7% after target DNA hybridization, while the current of the reference does not vary by more than ±0.6%. The current decrease confirms the field effect induced by the negative charges of the DNA molecules. Moreover, the selectivity, reproducibility, reversibility and stability of the studied devices are emphasized by de-hybridization, non-complementary hybridization and re-hybridization experiments. This first proof of concept opens the way for future developments using SiC-NW-based sensors.

  9. Silicon Carbide Telescope Investigations for the LISA Mission

    Science.gov (United States)

    Sanjuan, J.; Spannagel, R.; Braxmaier, C.; Korytov, D.; Mueller, G.; Preston, A.; Livas, J.

    2013-01-01

    Space-based gravitational wave (GW) detectors are conceived to detect GWs in the low frequency range (mili-Hertz) by measuring the distance between free-falling proof masses in spacecraft (SC) separated by 5 Gm. The reference in the last decade has been the joint ESA-NASA mission LISA. One of the key elements of LISA is the telescope since it simultaneously gathers the light coming from the far SC (approximately or equal to 100 pW) and expands, collimates and sends the outgoing beam (2 W) to the far SC. Demanding requirements have been imposed on the telescope structure: the dimensional stability of the telescope must be approximately or equal to 1pm Hz(exp-1/2) at 3 mHz and the distance between the primary and the secondary mirrors must change by less than 2.5 micrometer over the mission lifetime to prevent defocussing. In addition the telescope structure must be light, strong and stiff. For this reason a potential on-axis telescope structure for LISA consisting of a silicon carbide (SiC) quadpod structure has been designed, constructed and tested. The coefficient of thermal expansion (CTE) in the LISA expected temperature range has been measured with a 1% accuracy which allows us to predict the shrinkage/expansion of the telescope due to temperature changes, and pico-meter dimensional stability has been measured at room temperature and at the expected operating temperature for the LISA telescope (around -6[deg]C). This work is supported by NASA Grants NNX10AJ38G and NX11AO26G,

  10. Analysis of System Wide Distortion in an Integrated Power System Utilizing a High Voltage DC Bus and Silicon Carbide Power Devices

    Science.gov (United States)

    2007-06-01

    concentrated on the power supplied to a propulsion motor driven by an inverter with simulated silicon carbide switches. Theoretically, silicon ... carbide switches have the advantage of being able to withstand a very large blocking voltage and carry very large forward currents. Silicon carbide switches...are also very efficient due to their quick rise and fall times. Since silicon carbide switches can withstand high voltage differentials and switch

  11. Mechanical Properties and Microstructure of Biomorphic Silicon Carbide Ceramics Fabricated from Wood Precursors

    Science.gov (United States)

    Singh, Mrityunjay; Salem, J. A.; Gray, Hugh R. (Technical Monitor)

    2002-01-01

    Silicon carbide based, environment friendly, biomorphic ceramics have been fabricated by the pyrolysis and infiltration of natural wood (maple and mahogany) precursors. This technology provides an eco-friendly route to advanced ceramic materials. These biomorphic silicon carbide ceramics have tailorable properties and behave like silicon carbide based materials manufactured by conventional approaches. The elastic moduli and fracture toughness of biomorphic ceramics strongly depend on the properties of starting wood preforms and the degree of molten silicon infiltration. Mechanical properties of silicon carbide ceramics fabricated from maple wood precursors indicate the flexural strengths of 3441+/-58 MPa at room temperature and 230136 MPa at 1350C. Room temperature fracture toughness of the maple based material is 2.6 +/- 0.2 MPa(square root of)m while the mahogany precursor derived ceramics show a fracture toughness of 2.0 +/- 0.2 Mpa(square root of)m. The fracture toughness and the strength increase as the density of final material increases. Fractographic characterization indicates the failure origins to be pores and chipped pockets of silicon.

  12. Melting of Grey Cast Iron Based on Steel Scrap Using Silicon Carbide

    Directory of Open Access Journals (Sweden)

    Stojczew A.

    2014-08-01

    Full Text Available The paper presents the issue of synthetic cast iron production in the electric induction furnace exclusively on the steel scrap base. Silicon carbide and synthetic graphite were used as carburizers. The carburizers were introduced with solid charge or added on the liquid metal surface. The chemical analysis of the produced cast iron, the carburization efficiency and microstructure features were presented in the paper. It was stated that ferrosilicon can be replaced by silicon carbide during the synthetic cast iron melting process. However, due to its chemical composition (30% C and 70% Si which causes significant silicon content in iron increase, the carbon deficit can be partly compensated by the carburizer introduction. Moreover it was shown that the best carbon and silicon assimilation rate is obtained where the silicon carbide is being introduced together with solid charge. When it is thrown onto liquid alloy surface the efficiency of the process is almost two times less and the melting process lasts dozen minutes long. The microstructure of the cast iron produced with the silicon carbide shows more bulky graphite flakes than inside the microstructure of cast iron produced on the pig iron base.

  13. A Study of the Pickup of Abrasive Particles during Abrasion of Annealed Aluminum on Silicon Carbide Abrasive Papers,

    Science.gov (United States)

    annealed aluminium during abrasion on silicon carbide abrasive papers. Neither optical nor scanning electron microscopy adequately characterises the...despite its limitations when examining rough surfaces. The present results show that the pickup of silicon carbide particles increases with increase in

  14. Sensitivity analysis of a PWR fuel element using zircaloy and silicon carbide claddings

    Energy Technology Data Exchange (ETDEWEB)

    Faria, Rochkhudson B. de; Cardoso, Fabiano; Salome, Jean A.D.; Pereira, Claubia; Fortini, Angela, E-mail: rochkhudson@ufmg.br, E-mail: claubia@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Escola de Engenharia. Departamento de Engenharia Nuclear

    2015-07-01

    The alloy composed of zirconium has been used effectively for over 50 years in claddings of nuclear fuel, especially for PWR type reactors. However, to increase fuel enrichment with the aim of raising the burning and maintaining the safety of nuclear plants is of great relevance the study of new materials that can replace safely and efficiently zircaloy cladding. Among several proposed material, silicon carbide (SiC) has a potential to replace zircaloy as fuel cladding material due to its high-temperature tolerance, chemical stability and low neutron affinity. In this paper, the goal is to expand the study with silicon carbide cladding, checking its behavior when submitted to an environment with boron, burnable poison rods, and temperature variations. Sensitivity calculation and the impact in multiplication factor to both claddings, zircaloy and silicon carbide, were performed during the burnup. The neutronic analysis was made using the SCALE 6.0 (Standardized Computer Analysis for Licensing Evaluation) code. (author)

  15. Implementation Challenges for Sintered Silicon Carbide Fiber Bonded Ceramic Materials for High Temperature Applications

    Science.gov (United States)

    Singh, M.

    2011-01-01

    During the last decades, a number of fiber reinforced ceramic composites have been developed and tested for various aerospace and ground based applications. However, a number of challenges still remain slowing the wide scale implementation of these materials. In addition to continuous fiber reinforced composites, other innovative materials have been developed including the fibrous monoliths and sintered fiber bonded ceramics. The sintered silicon carbide fiber bonded ceramics have been fabricated by the hot pressing and sintering of silicon carbide fibers. However, in this system reliable property database as well as various issues related to thermomechanical performance, integration, and fabrication of large and complex shape components has yet to be addressed. In this presentation, thermomechanical properties of sintered silicon carbide fiber bonded ceramics (as fabricated and joined) will be presented. In addition, critical need for manufacturing and integration technologies in successful implementation of these materials will be discussed.

  16. Synthesis of thermal and chemical resistant oxygen barrier starch with reinforcement of nano silicon carbide.

    Science.gov (United States)

    Dash, Satyabrata; Swain, Sarat K

    2013-09-12

    Starch/silicon carbide (starch/SiC) bionanocomposites were synthesized by solution method using different wt% of silicon carbide with starch matrix. The interaction between starch and silicon carbide was studied by Fourier transform infrared (FTIR) spectroscopy. The structure of the bionanocomposites was investigated by X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM). Thermal property of starch/SiC bionanocomposites was measured and a significant enhancement of thermal resistance was noticed. The oxygen barrier property of the composites was studied and a substantial reduction in permeability was observed as compared to the virgin starch. The reduction of oxygen permeability with enhancement of thermal stability of prepared bionanocomposites may enable the materials suitable for thermal resistant packaging and adhesive applications.

  17. Effect of silicon carbide ceramic coating process on the mirror surface quality

    Science.gov (United States)

    Wang, Peipei; Wang, Li; Wang, Gang; Bai, Yunli; Wang, Peng; Xiao, Zhenghang

    2016-10-01

    Silicon carbide, as a new reflector material, its excellent physical and chemical properties has been widely recognized by the industry. In order to make SiC mirror better used in space optical system, we used digital coating equipment during its coating process. By using ion-assisted electron evaporation method, we got a complete metal reflective film system on the surface of finely polished silicon carbide mirror. After automated coating process, by adjusting the coating parameters during the process, the surface roughness of silicon carbide improved from 7.8 nm to 5.1 nm, and the average optical reflectance of the surface reached 95% from visible to near-infrared. The metal reflective film system kept well after annealing and firmness test. As a result, the work of this paper will provide an important reference for high-precision coating process on large diameter SiC mirror.

  18. [Effects of silicon carbide on the cure depth, hardness and compressive strength of composite resin].

    Science.gov (United States)

    Wang, Ke; Lin, Yi'na; Liu, Xiaoqing

    2009-08-01

    The hardness, compressive strength and cure depth are important indices of the composite resin. This investigation was made with regard to the effects of silicon carbide on the cure depth, hardness and compressive strength of the light-curing composite resin. Different amounts of silicon carbide were added to the light-curing composite resin, which accounted for 0 wt%, 1 wt%, 0.6 wt%, 0.3 wt%, 0.1 wt%, 0.05 wt% and 0.005 wt% of the composite resin, respectively. The hardness, compressive strength and cure depth of the six afore-mentioned groups of composite resin were measured by the vernier caliper, the vickers hardness tester and the tensile strength of machine, respectively. The results showed that silicon carbide improved the hardness and compressive strength of the light-curing composite resin,when the concentration was 0.05 wt%. And the cure depth was close to that of control.

  19. GRANULATION TRIALS OF WASTE THE DUST SILICON CARBIDE FOR UTILIZATION IN METALLURGY

    Directory of Open Access Journals (Sweden)

    Gabriel Borowski

    2016-09-01

    Full Text Available The article presents the results of laboratory granulation tests of dust silicon carbide and the results of research on the selection of the binder and the properties of the granules obtained. The research material was a waste of the silicon carbide powder with a high fragmentation, mixed with a cement or an organic modified starch specimen. Six tests were performed in a disc granulator with 100 cm in diameter. In each series of trial specified: the type and share of the binder, the diameter of the granules, tenderness, type of structure and mechanical properties. Good granules of silicon carbide obtained with the addition of cement binder with 4% of the mass fraction and at least 24 hours of seasoning. The binder should be added twice by powdering, first in a stirred granulator, and again after manufacture. It was found that the resulting granules may be used as a replacement of ferrosilicon in the process of steelmaking.

  20. Preparation And Characterization Of Silicon Carbide Foam By Using In-Situ Generated Polyurethane Foam

    Directory of Open Access Journals (Sweden)

    Shalini Saxena

    2015-08-01

    Full Text Available Abstract The open cell silicon carbide SiC foam was prepared using highly crosslinked hybrid organic- inorganic polymer resin matrix. As inorganic polymer polycarbosilane was taken and organic resin was taken as a mixture of epoxy resin and diisocyanates. The resultant highly crosslinked hybrid resin matrix on heating and subsequently on pyrolysis yielded open cell silicon carbide foam. The hybrid resin matrix was characterized by Fourier transform Infrared Spectroscopy FT-IR and thermal properties i.e. Thermogravimetric analysis TGA amp Differential Scanning Calorimetry DSC were also studied. The morphological studies of silicon carbide ceramic foam were carried out using X-ray Spectroscopy XRD amp Scanning Electron Microscopy SEM.

  1. Spark Plasma Sintering of Low Alloy Steel Modified with Silicon Carbide

    Directory of Open Access Journals (Sweden)

    Hebda M.

    2016-06-01

    Full Text Available The influence of adding different amounts of silicon carbide on the properties (density, transverse rupture strength, microhardness and corrosion resistance and microstructure of low alloy steel was investigated. Samples were prepared by mechanical alloying (MA process and sintered by spark plasma sintering (SPS technique. After the SPS process, half of each of obtained samples was heat-treated in a vacuum furnace. The results show that the high-density materials have been achieved. Homogeneous and fine microstructure was obtained. The heat treatment that followed the SPS process resulted in an increase in the mechanical and plastic properties of samples with the addition 1wt. % of silicon carbide. The investigated compositions containing 1 wt.% of SiC had better corrosion resistance than samples with 3 wt.% of silicon carbide addition. Moreover, corrosion resistance of the samples with 1 wt.% of SiC can further be improved by applying heat treatment.

  2. Microstructure and Mechanical Properties of Reaction-Formed Silicon Carbide (RFSC) Ceramics

    Science.gov (United States)

    Singh, M.; Behrendt, D. R.

    1994-01-01

    The microstructure and mechanical properties of reaction-formed silicon carbide (RFSC) ceramics fabricated by silicon infiltration of porous carbon preforms are discussed. The morphological characterization of the carbon preforms indicates a very narrow pore size distribution. Measurements of the preform density by physical methods and by mercury porosimetry agree very well and indicate that virtually all of the porosity in the preforms is open to infiltrating liquids. The average room temperature flexural strength of the RFSC material with approximately 8 at.% free silicon is 369 +/- 28 MPa (53.5 +/- 4 ksi). The Weibull strength distribution data give a characteristic strength value of 381 MPa (55 ksi) and a Weibull modulus of 14.3. The residual silicon content is lower and the strengths are superior to those of most commercially available reaction-bonded silicon carbide materials.

  3. Modelling of an ultra-thin silicatene/silicon-carbide hybrid film

    Science.gov (United States)

    Schlexer, Philomena; Pacchioni, Gianfranco

    2016-09-01

    Recently, a well-ordered silicatene/silicon-carbide hybrid thin-film supported on Ru(0 0 0 1) has been reported (2015 Surf. Sci. 632 9-13). The thin-film consist of a monolayer of corner sharing (SiO4)-tetrahedra on top of a (Si2C3) monolayer supported on the Ru(0 0 0 1) surface. This silicatene/silicon-carbide hybrid system may exhibit interesting properties for nano-technological applications and represents another example of a 2D material. We explore the physical and chemical properties of the silicatene/silicon-carbide thin-film using DFT and compare the vibrational spectra with existing experimental data. The characteristics of the silicatene/silicon-carbide hybrid system are compared with those of the bilayer-silicatene (pure SiO2 film). We found large differences in the adsorption modes of the two thin-films on the Ru(0 0 0 1) support. Whereas the bilayer-silicatene physisorbs on the Ru(0 0 0 1) surface, the silicatene/silicon-carbide layer binds via chemisorption. The chemical properties of the two thin-films were probed by adsorption of H atoms at various positions, as well as by Al-doping and the formation of hydroxyl groups (Al-OH). These results show that despite the similar structure of the top layer and the identical metal support (Ru), the mixed silicatene/silicon-carbide system behaves quite differently from the pure silica two-layer counterpart.

  4. Surface Modification of Nanometre Silicon Carbide Powder with Polystyrene by Inductively Coupled Plasma

    Institute of Scientific and Technical Information of China (English)

    WEI Gang; MENG Yuedong; ZHONG Shaofeng; LIU Feng; JIANG Zhongqing; SHU Xingsheng; REN Zhaoxing; WANG Xiangke

    2008-01-01

    An investigation was made into polystyrene (PS) grafted onto nanometre sili-con carbide (SIC) particles. In our experiment, the grafting polymerization reaction was in-duced by a radio frequency (RF) inductively coupled plasma (ICP) treatment of the nanome-tre powder. FTIR (Fourier transform infrared spectrum) and XPS (X-ray photoelectron spec-troscopy) results reveal that PS is grafted onto the surface of silicon carbide powder. An analysis is presented on the effectiveness of this approach as a function of plasma operating variables including the plasma treating power, treating time, and grafting reaction temperature and time.

  5. Observations on infiltration of silicon carbide compacts with an aluminium alloy

    Science.gov (United States)

    Asthana, R.; Rohatgi, P. K.

    1992-01-01

    The melt infiltration of ceramic particulates permits an opportunity to observe such fundamental materials phenomena as nucleation, dynamic wetting and growth in constrained environments. Experimental observations are presented on the infiltration behavior and matrix microstructures that form when porous compacts of platelet-shaped single crystals of alpha- (hexagonal) silicon carbide are infiltrated with a liquid 2014 Al alloy. The infiltration process involved counter gravity infiltration of suitably tamped and preheated compacts of silicon carbide platelets under an external pressure in a special pressure chamber for a set period, then by solidification of the infiltrant metal in the interstices of the bed at atmospheric pressure.

  6. Broadband antireflection silicon carbide surface by self-assembled nanopatterned reactive-ion etching

    DEFF Research Database (Denmark)

    Ou, Yiyu; Aijaz, Imran; Jokubavicius, Valdas

    2013-01-01

    An approach of fabricating pseudoperiodic antireflective subwavelength structures on silicon carbide by using self-assembled Au nanopatterns as etching mask is demonstrated. The nanopatterning process is more time-efficiency than the e-beam lithography or nanoimprint lithography process. The infl......An approach of fabricating pseudoperiodic antireflective subwavelength structures on silicon carbide by using self-assembled Au nanopatterns as etching mask is demonstrated. The nanopatterning process is more time-efficiency than the e-beam lithography or nanoimprint lithography process...... study presents a considerable omnidirectional luminescence enhancement....

  7. Synthesis of silicon carbide in a nitrogen plasma torch: rotational temperature determination and material analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz-Camacho, J; Castell, R [Universidad Simon BolIvar, Departamento de Fisica, Caracas (Venezuela, Bolivarian Republic of); Castro, A; Manrique, M [Universidad Simon BolIvar, Departamento de Ciencias de los Materiales, Caracas (Venezuela, Bolivarian Republic of)], E-mail: jgruiz@usb.ve

    2008-09-07

    Experiments on silicon carbide synthesis were performed using a dc nitrogen plasma torch. Measurements of rotational temperature of nitrogen molecules by emission spectroscopy were performed, based on the band (0, 1) of the first negative system of nitrogen N{sub 2}{sup +}(B{sup 2}{sigma}{sub u}{sup +}{yields}X{sup 2}{sigma}{sub g}{sup +}) for the R branch. Three different plasma torch powers were studied in order to optimize the production of silicon carbide with our experimental set-up. The synthesized products were characterized by x-ray diffraction, scanning electron microscopy and energy dispersive x-ray spectroscopy.

  8. Synthesis of silicon carbide in a nitrogen plasma torch: rotational temperature determination and material analysis

    Science.gov (United States)

    Ruiz-Camacho, J.; Castell, R.; Castro, A.; Manrique, M.

    2008-09-01

    Experiments on silicon carbide synthesis were performed using a dc nitrogen plasma torch. Measurements of rotational temperature of nitrogen molecules by emission spectroscopy were performed, based on the band (0, 1) of the first negative system of nitrogen N_2^+ (B\\,{}^2\\Sigma_u^+ \\to X\\,{}^2\\Sigma _g^+) for the R branch. Three different plasma torch powers were studied in order to optimize the production of silicon carbide with our experimental set-up. The synthesized products were characterized by x-ray diffraction, scanning electron microscopy and energy dispersive x-ray spectroscopy.

  9. Rapid thermal annealing and crystallization mechanisms study of silicon nanocrystal in silicon carbide matrix

    Directory of Open Access Journals (Sweden)

    Wan Zhenyu

    2011-01-01

    Full Text Available Abstract In this paper, a positive effect of rapid thermal annealing (RTA technique has been researched and compared with conventional furnace annealing for Si nanocrystalline in silicon carbide (SiC matrix system. Amorphous Si-rich SiC layer has been deposited by co-sputtering in different Si concentrations (50 to approximately 80 v%. Si nanocrystals (Si-NC containing different grain sizes have been fabricated within the SiC matrix under two different annealing conditions: furnace annealing and RTA both at 1,100°C. HRTEM image clearly reveals both Si and SiC-NC formed in the films. Much better "degree of crystallization" of Si-NC can be achieved in RTA than furnace annealing from the research of GIXRD and Raman analysis, especially in high-Si-concentration situation. Differences from the two annealing procedures and the crystallization mechanism have been discussed based on the experimental results.

  10. Quantum transport in epitaxial graphene on silicon carbide (0001)

    Energy Technology Data Exchange (ETDEWEB)

    Jobst, Johannes

    2013-04-01

    Graphene - a two-dimensional allotrope of carbon - offers many opportunities for research in fundamental science, as well as for technological applications. First, for being a single layer of carbon atoms, which are bound in a honeycomb geometry, it represents a two-dimensional electron gas that is accessible for investigation and manipulation directly, in contrast to conventional semiconductor-based, two-dimensional systems. Second, it is chemically and mechanically robust and offers a high electrical and thermal conductivity, while being widely transparent for visible light. And third, charge carriers in graphene mimic massless Dirac fermions as graphene exhibits a linear energy dispersion. In the present thesis, epitaxial graphene that is grown by the thermal decomposition of silicon carbide (SiC) on its (0001) basal plane is investigated. Here, monolayer graphene (MLG) with reproducible properties is formed when silicon atoms sublime at high temperatures in a well-controlled manner. In addition to MLG, a carbon-rich interface layer is formed between graphene and the SiC surface. It is electrically insulating but has a strong impact on the properties of MLG. The buffer layer can be converted to a quasi-free-standing monolayer graphene (QFMLG) by intercalation of hydrogen between buffer layer and SiC surface. This treatment reduces the coupling between QFMLG and SiC. The graphene-substrate interaction can be further reduced when free-standing epitaxial graphene (FEG) is patterned. With this method, the SiC substrate is selectively etched away with a photo-electrochemical reaction, while suspended graphene devices remain. The main topics of the present thesis are the fabrication and the electrical characterization of these three materials MLG, QFMLG and FEG. In particular, classical and quantum corrections to resistivity and conductivity, as well as the interaction with the substrate are investigated with transport and magnetotransport measurements. We observe

  11. All-Optical dc Nanotesla Magnetometry Using Silicon Vacancy Fine Structure in Isotopically Purified Silicon Carbide

    Directory of Open Access Journals (Sweden)

    D. Simin

    2016-07-01

    Full Text Available We uncover the fine structure of a silicon vacancy in isotopically purified silicon carbide (4H-^{28}SiC and reveal not yet considered terms in the spin Hamiltonian, originated from the trigonal pyramidal symmetry of this spin-3/2 color center. These terms give rise to additional spin transitions, which would be otherwise forbidden, and lead to a level anticrossing in an external magnetic field. We observe a sharp variation of the photoluminescence intensity in the vicinity of this level anticrossing, which can be used for a purely all-optical sensing of the magnetic field. We achieve dc magnetic field sensitivity better than 100  nT/sqrt[Hz] within a volume of 3×10^{-7}mm^{3} at room temperature and demonstrate that this contactless method is robust at high temperatures up to at least 500 K. As our approach does not require application of radio-frequency fields, it is scalable to much larger volumes. For an optimized light-trapping waveguide of 3  mm^{3}, the projection noise limit is below 100  fT/sqrt[Hz].

  12. Comparison of silicon and 4H silicon carbide patterning using focused ion beams

    Energy Technology Data Exchange (ETDEWEB)

    Veerapandian, S.K.P. [Chair of Electron Devices, University of Erlangen-Nuremberg, Cauerstrasse 6, 91058 Erlangen (Germany); Beuer, S.; Rumler, M.; Stumpf, F. [Fraunhofer Institute for Integrated Systems and Device Technology (IISB), Schottkystrasse 10, 91058 Erlangen (Germany); Thomas, K.; Pillatsch, L.; Michler, J. [Empa Materials Science and Technology, Feuerwerkerstrasse 39, 3602 Thun (Switzerland); Frey, L. [Chair of Electron Devices, University of Erlangen-Nuremberg, Cauerstrasse 6, 91058 Erlangen (Germany); Fraunhofer Institute for Integrated Systems and Device Technology (IISB), Schottkystrasse 10, 91058 Erlangen (Germany); Rommel, M. [Fraunhofer Institute for Integrated Systems and Device Technology (IISB), Schottkystrasse 10, 91058 Erlangen (Germany)

    2015-12-15

    In this work, focused ion beam (FIB) milling of different structures is studied and compared for two different electronic materials, i.e., silicon (Si) and silicon carbide (SiC). Results show that the same processing parameters yield different trench cross sections for Si and SiC, even when the different material removal rates (MRR) are taken into account. In order to investigate more complex structures, nanocone arrays were fabricated in Si and SiC. The difference in the shape of the trench cross section and complex structures can be mainly explained by the significant difference in the angle dependent MRR for both materials. Other effects which occur during FIB irradiation by the non-ideal beam shape such as swelling and damage outside of the purposely processed region are emulated and sensitively studied by scanning probe microscopy techniques such as atomic force microscopy (in-line and off-line) and scanning spreading resistance microscopy, respectively, for SiC and the results are compared with those for Si.

  13. Synthesis of silicon carbide-silicon nitride composite ultrafine particles using a carbon dioxide laser

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Masaaki; Maniette, Yves; Nakata, Yoshinori; Okutani, Takeshi (Government Industrial Development Lab., Hokkaido, Sapporo (Japan))

    1993-05-01

    The synthesis and the structure of silicon carbide-silicon nitride (SiC-Si[sub 3]N[sub 4]) composite ultrafine particles have been studied. SiC-Si[sub 3]N[sub 4] composite ultrafine particles were prepared by irradiating a SiH[sub 4], C[sub 2]H[sub 4], and NH[sub 3] gas mixture with a CO[sub 2] laser at atmospheric pressure. The composition of composite powders changed with the reactant gas flow rate. The carbon and nitrogen content of the powder could be controlled in a wide range from 0 to 30 wt%. The composite powder, which contained 25.3 wt% carbon and 5.8 wt% nitrogen, had a [beta]-SiC structure. As the nitrogen content increased, SiC decreased and amorphous phase, Si[sub 3]N[sub 4], Si appeared. The results of XPS and lattice constant measurements suggested that Si, C, and N atoms were intimately mixed in the composite particles.

  14. All-Optical dc Nanotesla Magnetometry Using Silicon Vacancy Fine Structure in Isotopically Purified Silicon Carbide

    Science.gov (United States)

    Simin, D.; Soltamov, V. A.; Poshakinskiy, A. V.; Anisimov, A. N.; Babunts, R. A.; Tolmachev, D. O.; Mokhov, E. N.; Trupke, M.; Tarasenko, S. A.; Sperlich, A.; Baranov, P. G.; Dyakonov, V.; Astakhov, G. V.

    2016-07-01

    We uncover the fine structure of a silicon vacancy in isotopically purified silicon carbide (4H-28SiC) and reveal not yet considered terms in the spin Hamiltonian, originated from the trigonal pyramidal symmetry of this spin-3 /2 color center. These terms give rise to additional spin transitions, which would be otherwise forbidden, and lead to a level anticrossing in an external magnetic field. We observe a sharp variation of the photoluminescence intensity in the vicinity of this level anticrossing, which can be used for a purely all-optical sensing of the magnetic field. We achieve dc magnetic field sensitivity better than 100 nT /√{Hz } within a volume of 3 ×10-7m m3 at room temperature and demonstrate that this contactless method is robust at high temperatures up to at least 500 K. As our approach does not require application of radio-frequency fields, it is scalable to much larger volumes. For an optimized light-trapping waveguide of 3 mm3 , the projection noise limit is below 100 fT /√{Hz } .

  15. Abrasive wear behavior of heat-treated ABC-silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xiao Feng; Lee, Gun Y.; Chen, Da; Ritchie, Robert O.; De Jonghe, Lutgard C.

    2002-06-17

    Hot-pressed silicon carbide, containing aluminum, boron, and carbon additives (ABC-SiC), was subjected to three-body and two-body wear testing using diamond abrasives over a range of sizes. In general, the wear resistance of ABC-SiC, with suitable heat treatment, was superior to that of commercial SiC.

  16. Silicon Carbide (SiC) Power Processing Unit (PPU) for Hall Effect Thrusters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this SBIR project, APEI, Inc. is proposing to develop a high efficiency, rad-hard 3.8 kW silicon carbide (SiC) power supply for the Power Processing Unit (PPU) of...

  17. Reaction rate uncertainties and 26Al in AGB silicon carbide stardust

    NARCIS (Netherlands)

    van Raai, M.A.; Lugaro, M.A.; Karakas, A.I.; Iliadis, C.

    2008-01-01

    Context. Stardust is a class of presolar grains each of which presents an ideally uncontaminated stellar sample. Mainstream silicon carbide (SiC) stardust formed in the extended envelopes of carbon-rich asymptotic giant branch (AGB) stars and incorporated the radioactive nucleus 26Al as a trace elem

  18. Synthesis of silicon carbide from rice husk in a packed bed arc reactor

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, P.K.; Nayak, B.B.; Mohanty, B. [Regional Research Lab., Bhubaneswar (India)

    1995-09-01

    Silicon carbide in the form of powder was prepared from boiler burnt rice husk in a new type of packed bed arc reactor where the raw materials were processed in briquette form. X-ray diffraction analysis identified the presence of both {beta} and {alpha} SiC. Microstructural characterization revealed the presence of triangular, truncated triangular, and hexagonal crystallites, along with platelets.

  19. Artificial Dielectric Layer Based on PECVD Silicon Carbide for Terahertz Sensing Applications

    NARCIS (Netherlands)

    Fiorentino, G.; Syed, W.; Adam, A.; Neto, A.; Sarro, P.M.

    2014-01-01

    The refractive index of a conventional dielectric layer can be enhanced using an Artificial Dielectric Layer (ADL). Here we present the fabrication of low temperature PECVD Silicon Carbide (SiC) membranes with very high refractive index (up to 5 at 1 THz) in the terahertz frequency range. The SiC de

  20. Test bench for thermal cycling of 10 kV silicon carbide power modules

    DEFF Research Database (Denmark)

    Sønderskov, Simon Dyhr; Jørgensen, Asger Bjørn; Maarbjerg, Anders Eggert;

    2016-01-01

    This paper presents a test bench for lifetime investigation of 10 kV silicon carbide power modules. The test bench subjects high voltage switching operation to the modules while power cycling. Thus both a thermal and electrical operating point is emulated. The power cycling setup features offline...

  1. Adsorption studies of the gram-negative bacteria onto nanostructured silicon carbide.

    Science.gov (United States)

    Borkowski, Andrzej; Szala, Mateusz; Cłapa, Tomasz

    2015-02-01

    In this study, we demonstrated a significant adsorption of Pseudomonas putida bacteria onto aggregates of nanofibers (NFSiC) and nanorods (NRSiC) of silicon carbide (SiC) in aqueous suspensions. Langmuir and Freundlich isotherms were used to quantify adsorption affinities. It was found that adsorption of the bacteria strongly depended on the structure of the silicon carbide and the pH of the aqueous solution, which affected the isoelectric point of both the silicon carbide and the bacterial cells. The strongest affinity of bacteria was noted in the case of NRSiC aggregates. Affinity was inversely proportional to pH. Similarly, the adsorption of bacteria to the surface of the aggregates increased with decreasing pH. For NFSiC, the affinity of the bacteria for the surface of the aggregates was also inversely proportional to pH. However, adsorption increased at higher pH values. This discrepancy was explained by microscopic analysis, which showed that the bacterial cells were both adsorbed onto and trapped by NFSiC. The adsorption of bacteria onto a micrometric silicon carbide reference material was significantly smaller than adsorption onto nanostructured SiC.

  2. Electromagnetic simulations of microwave heating experiments using reaction vessels made out of silicon carbide.

    Science.gov (United States)

    Robinson, John; Kingman, Sam; Irvine, Derek; Licence, Peter; Smith, Alastair; Dimitrakis, Georgios; Obermayer, David; Kappe, C Oliver

    2010-09-28

    There is a growing body of literature which reports the use of silicon carbide vessels to shield reaction mixtures during microwave heating. In this paper we use electromagnetic simulations and microwave experiments to show that silicon carbide vessels do not exclude the electric field, and that dielectric heating of reaction mixtures will take place in addition to heat transfer from the silicon carbide. The contribution of dielectric heating and heat transfer depends on the dielectric properties of the mixture, and the temperature at which the reaction is carried out. Solvents which remain microwave absorbent at high temperatures, such as ionic liquids, will heat under the direct influence of the electric field from 30-250 degrees C. Solvents which are less microwave absorbent at higher temperatures will be heated by heat-transfer only at temperatures in excess of 150 degrees C. The results presented in this paper suggest that the influence of the electric field cannot be neglected when interpreting microwave assisted synthesis experiments in silicon carbide vessels.

  3. Machining studies of die cast aluminum alloy-silicon carbide composites

    Science.gov (United States)

    Sornakumar, Thambu; Kathiresan, Marimuthu

    2010-10-01

    Metal matrix composites (MMCs) with high specific stiffness, high strength, improved wear resistance, and thermal properties are being increasingly used in advanced structural, aerospace, automotive, electronics, and wear applications. Aluminum alloy-silicon carbide composites were developed using a new combination of the vortex method and the pressure die-casting technique in the present work. Machining studies were conducted on the aluminum alloy-silicon carbide (SiC) composite work pieces using high speed steel (HSS) end-mill tools in a milling machine at different speeds and feeds. The quantitative studies on the machined work piece show that the surface finish is better for higher speeds and lower feeds. The surface roughness of the plain aluminum alloy is better than that of the aluminum alloy-silicon carbide composites. The studies on tool wear show that flank wear increases with speed and feed. The end-mill tool wear is higher on machining the aluminum alloy-silicon carbide composites than on machining the plain aluminum alloy.

  4. Stability and electrokinetic potential of silicon carbide suspensions in aqueous organic media

    Science.gov (United States)

    Yeremenko, B. V.; Lyubchenko, I. N.; Skobets, I. Y.

    1984-01-01

    The method of electroosmosis was used to study the dependence of the electrokinetic potential of silicon carbide suspensions in mixtures of water -n. alcohol. The reasons for the dependence of the electrokinetic potential on the composition of the intermicellar liquid are discussed.

  5. Recent trends and theoretical background in sintering of silicon carbide ceramics

    Science.gov (United States)

    Suzuki, H.

    1983-01-01

    This article gives an outline of sintering techniques of silicon carbide and refers to recent developments. These techniques are also applicable to other oxides with a high melting point and particularly high sinterability, namely MgO and BeO.

  6. Biomimetic mineralization of calcium phosphate on a functionalizaed porous silicon carbide biomaterial

    NARCIS (Netherlands)

    Dey, A.; Hoogen, van de C.J.; Rosso, M.; Lousberg, N.J.H.G.M.; Hendrix, M.M.R.M.; Friedrich, H.; Ramirez Rico, J.; Zuilhof, H.; With, de G.; Sommerdijk, N.A.J.M.

    2012-01-01

    Porous biomorphic silicon carbide (bioSiC) is a structurally realistic, high-strength, and biocompatible material which is promising for application in load-bearing implants. The deposition of an osteoconductive coating is essential for further improvement of its integration with the surrounding

  7. Biomimetic mineralization of calcium phosphate on a functionalizaed porous silicon carbide biomaterial

    NARCIS (Netherlands)

    Dey, A.; Hoogen, van de C.J.; Rosso, M.; Lousberg, N.J.H.G.M.; Hendrix, M.M.R.M.; Friedrich, H.; Ramirez Rico, J.; Zuilhof, H.; With, de G.; Sommerdijk, N.A.J.M.

    2012-01-01

    Porous biomorphic silicon carbide (bioSiC) is a structurally realistic, high-strength, and biocompatible material which is promising for application in load-bearing implants. The deposition of an osteoconductive coating is essential for further improvement of its integration with the surrounding tis

  8. Friction and metal transfer for single-crystal silicon carbide in contact with various metals in vacuum

    Science.gov (United States)

    Miyoshi, K.; Buckley, D. H.

    1978-01-01

    Sliding friction experiments were conducted with single-crystal silicon carbide in contact with transition metals (tungsten, iron, rhodium, nickel, titanium, and cobalt), copper, and aluminum. Results indicate the coefficient of friction for a silicon carbide-metal system is related to the d bond character and relative chemical activity of the metal. The more active the metal, the higher the coefficient of friction. All the metals examined transferred to the surface of silicon carbide in sliding. The chemical activity of metal to silicon and carbon and shear modulus of the metal may play important roles in metal transfer and the form of the wear debris. The less active and greater resistance to shear the metal has, with the exception of rhodium and tungsten, the less transfer to silicon carbide.

  9. Silicon carbide thin films for high temperature microelectromechanical systems

    Science.gov (United States)

    Fleischman, Aaron Judah

    Silicon Carbide (SiC) was studied for use as a material in microelectromechanical systems (MEMS). An APCVD reactor was built to deposit SiC on 100-mm diameter substrates. 3C-SiC films were grown heteroepitaxially atop 100-mm Si wafers. SiC was deposited atop suitable sacrificial layers of polysilicon and thermal oxide. The reactor gas flow was modeled using finite element techniques. The gas flow formed a recirculating pattern, with fresh reactant gases injected at the top of the reactor, traveling down the inside sidewalls and introduced at the bottom of the wafer, forming a plume of heated gases rising to the top of the reactor. This recirculation pattern explains the gradually decreasing growth rate from the wafer's bottom to its top as reactant gases are gradually depleted as they rise. Intentional doping of 3C-SiC films was studied, using diborane and phosphine dopant sources. SIMS indicated that B and P could be incorporated into 3C-SiC films, however B doped films were electrically compensated due to trace amounts of nitrogen in the diborane. Boron concentrations above 3C-SiC's solid solubility caused the SiC to become polycrystalline. Phosphorus incorporation was less predictable and did not vary linearly with phosphine flow rates. A reactive ion etch (REE) process was developed to etch 3C-SiC. Addition of He to the plasma chemistry enhanced the etch rates and etch anisotropy of the 3C-SiC. The etch recipe also produced similar results for polycrystalline SiC on polysilicon and thermal oxide. A maximum SiC etch rate of 1,267 A/min with a selectivity of 1.4 to Si was obtained. Using the above methods, SiC resonant devices were fabricated using polysilicon and thermal oxide as sacrificial layers. Polysilicon resonant devices were fabricated for comparison. The devices were tested by measuring their resonant frequency at room and elevated temperatures to 900°C to determine Young's modulus and its temperature dependence. All devices showed resonant frequency

  10. Fluorination of silicon carbide thin films using pure F{sub 2} gas or XeF{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Batisse, Nicolas [Laboratoire des Materiaux Inorganiques UMR UBP-CNRS 6002, Clermont Universite, Universite Blaise Pascal, Clermont-Ferrand (France); Guerin, Katia, E-mail: Katia.guerin@univ-bpclermont.f [Laboratoire des Materiaux Inorganiques UMR UBP-CNRS 6002, Clermont Universite, Universite Blaise Pascal, Clermont-Ferrand (France); Dubois, Marc; Hamwi, Andre; Spinelle, Laurent; Tomasella, Eric [Laboratoire des Materiaux Inorganiques UMR UBP-CNRS 6002, Clermont Universite, Universite Blaise Pascal, Clermont-Ferrand (France)

    2010-09-30

    Two fluorination methods: direct fluorination using F{sub 2} gas and fluorination by the decomposition of fluorinating agent XeF{sub 2} have been applied to silicon carbide SiC thin films in order to form a composite of carbide derived carbon film together with residual silicon carbide. Before and after fluorination, the thin films have been characterized by Scanning Electron Microscopy, Rutherford Backscattering spectroscopy, Fourier Transformed InfraRed and Raman spectroscopies. Whereas direct fluorination leads to irreversible damages into the thin films, XeF{sub 2} method allows a progressive etching of the silicon atoms and the formation of non-fluorinated carbon.

  11. Microstructure and Mechanical Properties of Reaction-Formed Joints in Reaction Bonded Silicon Carbide Ceramics

    Science.gov (United States)

    Singh, M.

    1998-01-01

    A reaction-bonded silicon carbide (RB-SiC) ceramic material (Carborundum's Cerastar RB-SIC) has been joined using a reaction forming approach. Microstructure and mechanical properties of three types of reaction-formed joints (350 micron, 50-55 micron, and 20-25 micron thick) have been evaluated. Thick (approximately 350 micron) joints consist mainly of silicon with a small amount of silicon carbide. The flexural strength of thick joints is about 44 plus or minus 2 MPa, and fracture always occurs at the joints. The microscopic examination of fracture surfaces of specimens with thick joints tested at room temperature revealed the failure mode to be typically brittle. Thin joints (<50-55 micron) consist of silicon carbide and silicon phases. The room and high temperature flexural strengths of thin (<50-55 micron) reaction-formed joints have been found to be at least equal to that of the bulk Cerastar RB-SIC materials because the flexure bars fracture away from the joint regions. In this case, the fracture origins appear to be inhomogeneities inside the parent material. This was always found to be the case for thin joints tested at temperatures up to 1350C in air. This observation suggests that the strength of Cerastar RB-SIC material containing a thin joint is not limited by the joint strength but by the strength of the bulk (parent) materials.

  12. High Temperature Joining and Characterization of Joint Properties in Silicon Carbide-Based Composite Materials

    Science.gov (United States)

    Halbig, Michael C.; Singh, Mrityunjay

    2015-01-01

    Advanced silicon carbide-based ceramics and composites are being developed for a wide variety of high temperature extreme environment applications. Robust high temperature joining and integration technologies are enabling for the fabrication and manufacturing of large and complex shaped components. The development of a new joining approach called SET (Single-step Elevated Temperature) joining will be described along with the overview of previously developed joining approaches including high temperature brazing, ARCJoinT (Affordable, Robust Ceramic Joining Technology), diffusion bonding, and REABOND (Refractory Eutectic Assisted Bonding). Unlike other approaches, SET joining does not have any lower temperature phases and will therefore have a use temperature above 1315C. Optimization of the composition for full conversion to silicon carbide will be discussed. The goal is to find a composition with no remaining carbon or free silicon. Green tape interlayers were developed for joining. Microstructural analysis and preliminary mechanical tests of the joints will be presented.

  13. STUDY OF THE POSSIBILITY OF POLYTYPE 3C SILICON CARBIDE BULK CRYSTALS GROWING FOR USE IN POWER DEVICES

    Directory of Open Access Journals (Sweden)

    Lebedev Alexander Alexandrovich

    2014-01-01

    Full Text Available Due to its electro-physical parameters, the silicon carbide is a promising material for power devices, including the microwave range. In recent years there has been considerable progress in the development of power devices, based on SiC. Serious problem, which hinders the widespread commercialization of SiC bipolar power devices, is the p-n structures degradation during high densities of passing forward current. In 1981 the blue SiC LED’s emission spectrum over time degradation was detected. Later, after the creation of power rectifier diodes, based on SiC, it was found that their characteristics are also deteriorated with increase of operating time. It was found that the cause of degradation are the so-called “Stacking Faults” (SF -i.e., the formation of cubic SiC layers inside the hexagonal SiC diodes during direct current flow through them. However, it is easy to assume that this degradation mechanism is absent in devices, completely based on cubic polytype 3C-SiC. This study is dedicated to the study of possibility of creating device heterostructures based on 3C-SiC. It is shown that the heterojunction between SiC polytypes may be more structurally perfect than heterojunctions between semiconductors with different chemical nature. The conclusion on perspectivity of SiC-based heterostructures application in modern electronic devices is made.

  14. Applications of Cubic MgZnO Thin Films in Metal-Insulator-Silicon Structures

    Institute of Scientific and Technical Information of China (English)

    LIANG Jun; WU Hui-Zhen; LAO Yan-Feng; QIU Dong-Jiang; CHEN Nai-Bo; XU Tian-Ning

    2004-01-01

    @@ Cubic Mgo.55Zno.45O thin film alloys have been deposited on Si substrates at low growth temperature. The topography of the cross section of the epitaxial film by scanning electronic microscope demonstrates good mor phology and high interfacial quality. The high (001) orientation and wide band-gap (Eg > 5.5 eV) of the cubic Mgo.55Zno.45 O thin films accord with the guidelines for metal-insulator-silicon (MIS) device applications. Using the cubic ternary thin films as insulators, MIS structures have been fabricated. The capacitance-voltage measurements show the flat band voltage shift VFB of11.8 V and mobile ion density Dmc of 5.57 × 1010 cm-2 for the MIS structure. Leakage current density as low as ~ 10-7 A/cm2 is obtained at E = 700 kV/cm by the currentvoltage measurements. These unique structural and electrical properties of the fabricated MIS devices indicate that cubic MgZnO materials could become a new candidate for high-κ dielectrics used in silicon integrated circuit technologies.

  15. High Temperature All Silicon-Carbide (SiC) DC Motor Drives for Venus Exploration Vehicles Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project seeks to prove the feasibility of creating high-temperature silicon-carbide (SiC) based motor drives for...

  16. Preparation of reaction-bonded porous silicon carbide with denser surface layer in one-pot process

    National Research Council Canada - National Science Library

    SHIMAMURA, Akihiro; FUKUSHIMA, Manabu; HOTTA, Mikinori; OHJI, Tatsuki; KONDO, Naoki

    2015-01-01

    Macro-porous silicon carbide with high porosity around 70 vol %, comprising micrometer-sized spherical porosities and a relatively denser surface layer, was fabricated by a direct blowing and reaction bonding method...

  17. Preparation of reaction-bonded porous silicon carbide with denser surface layer in one-pot process

    National Research Council Canada - National Science Library

    Akihiro SHIMAMURA; Manabu FUKUSHIMA; Mikinori HOTTA; Tatsuki OHJI; Naoki KONDO

    2015-01-01

      Macro-porous silicon carbide with high porosity around 70 vol %, comprising micrometer-sized spherical porosities and a relatively denser surface layer, was fabricated by a direct blowing and reaction bonding method...

  18. Silicon carbide against silicon: a comparison in terms of physical properties, technology and electrical performance of power devices

    OpenAIRE

    Locatelli, M.; Gamal, S.,

    1993-01-01

    The aim of the present paper is to give the state of the art of the silicon carbide technology by “photographing” it beside the unique technology used for power electronics that is the silicon one. The theoretical superiority of SiC physical properties on those of Si, together with the important technological advancements realized during the last decade, are the main reasons of the interest given to SiC nowadays. Concerning electrical performance, the voltage and power handling capabilities d...

  19. Synthesis of silicon carbide coating on diamond by microwave heating of diamond and silicon powder: A heteroepitaxial growth

    Energy Technology Data Exchange (ETDEWEB)

    Leparoux, S. [Empa, Department of Materials Technology, Feuerwerkerstrasse 39, CH-3602 Thun (Switzerland)], E-mail: susanne.leparoux@empa.ch; Diot, C. [Consultant, allee de Mozart 10, F-92300 Chatillon (France); Dubach, A. [Empa, Department of Materials Technology, Feuerwerkerstrasse 39, CH-3602 Thun (Switzerland); Vaucher, S. [Empa, Department of Materials Technology, Feuerwerkerstrasse 39, CH-3602 Thun (Switzerland)

    2007-10-15

    When a powder mixture of diamond and silicon is heated by microwaves, heteroepitaxial growth of SiC is observed on the (1 1 1) as well as on the (1 0 0) faces of the diamond. The SiC over-layer was characterized by X-ray diffraction and scanning electron microscopy. High-resolution scanning electron microscopy shows the presence of triangular silicon carbide on the (1 1 1) faces of diamond while prismatic crystals are found on the (1 0 0) faces. The crystal growth seems to be favored in the plane parallel to the face (1 1 1)

  20. Composite materials and bodies including silicon carbide and titanium diboride and methods of forming same

    Science.gov (United States)

    Lillo, Thomas M.; Chu, Henry S.; Harrison, William M.; Bailey, Derek

    2013-01-22

    Methods of forming composite materials include coating particles of titanium dioxide with a substance including boron (e.g., boron carbide) and a substance including carbon, and reacting the titanium dioxide with the substance including boron and the substance including carbon to form titanium diboride. The methods may be used to form ceramic composite bodies and materials, such as, for example, a ceramic composite body or material including silicon carbide and titanium diboride. Such bodies and materials may be used as armor bodies and armor materials. Such methods may include forming a green body and sintering the green body to a desirable final density. Green bodies formed in accordance with such methods may include particles comprising titanium dioxide and a coating at least partially covering exterior surfaces thereof, the coating comprising a substance including boron (e.g., boron carbide) and a substance including carbon.

  1. Relation between Modulus of Elasticity and Compressive Strength of Ultrahigh-Strength Mortar with Mixed Silicon Carbide as Fine Aggregate

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Ultrahigh-strength mortar mixed surface-oxidized silicon carbide as a fine aggregate was prepared by means of press-casting followed by curing in an autoclave. The relation between modulus of elasticity up to 111 GPa and compressive strength up to 360 MPa of mortar mixed silicon carbide was discussed and it was revealed that the contributions of the aggregate hardness and of the interfacial strength between the aggregate and the cement paste on the elasticity of mortar were imporant.

  2. Mechanical and Corrosion Behaviour of Zn-27Al Based Composites Reinforced with Groundnut Shell Ash and Silicon Carbide

    OpenAIRE

    K.K. Alaneme; B.O. Fatile; J.O. Borode

    2014-01-01

    The mechanical and corrosion behaviour of Zn-27Al alloy based composites reinforced with groundnut shell ash and silicon carbide was investigated. Experimental test composite samples were prepared by melting Zn-27Al alloy with pre-determined proportions of groundnut ash and silicon carbide as reinforcements using double stir casting. Microstructural examination, mechanical properties and corrosion behaviour were used to characterize the composites produced. The results show that hardness and ...

  3. Thermal Fatigue Behavior of Silicon-Carbide-Doped Silver Microflake Sinter Joints for Die Attachment in Silicon/Silicon Carbide Power Devices

    Science.gov (United States)

    Zhang, Hao; Chen, Chuantong; Nagao, Shijo; Suganuma, Katsuaki

    2017-02-01

    We studied the thermal fatigue behavior of submicron silicon carbide particle (SiCp)-doped silver (Ag) microflake sinter joints for die attachment in next-generation power devices. Si dummy chips and direct bonded copper substrates with various metallization schemes were bonded using SiCp-doped Ag microflakes under mild conditions (250°C, 30 min, 0.4 MPa). The SiCp was distributed homogeneously in the porous Ag network and inhibited morphological evolution during thermal cycling tests. The shear strength of as-sintered pure Ag and SiCp-added joints was ˜50 MPa and 35 MPa, respectively. Thermal cycling tests from -40°C to 250°C were conducted for up to 1000 cycles (hours) to characterize the thermostability of the bonded joints. After 1000 cycles, joints with and without SiCp experienced bonding degradation, with shear strength of ˜25 MPa and 20 MPa, respectively. Thus, after 1000 cycles, the shear strength of pure Ag and SiCp-doped joints decreased by 58% and 42%, respectively, compared with their maximum value. Coarsening of porous Ag occurred in pure Ag joints. SiCp addition inhibited morphological evolution of SiCp-doped joints during thermal cycling. However, vertical cracks generated by thermal stress were observed in joints both with and without SiCp, which may limit long-term reliability.

  4. Hot-wire chemical vapor deposition prepared aluminum doped p-type microcrystalline silicon carbide window layers for thin film silicon solar cells

    Science.gov (United States)

    Chen, Tao; Köhler, Florian; Heidt, Anna; Carius, Reinhard; Finger, Friedhelm

    2014-01-01

    Al-doped p-type microcrystalline silicon carbide (µc-SiC:H) thin films were deposited by hot-wire chemical vapor deposition at substrate temperatures below 400 °C. Monomethylsilane (MMS) highly diluted in hydrogen was used as the SiC source in favor of SiC deposition in a stoichiometric form. Aluminum (Al) introduced from trimethylaluminum (TMAl) was used as the p-type dopant. The material property of Al-doped p-type µc-SiC:H thin films deposited with different deposition pressure and filament temperature was investigated in this work. Such µc-SiC:H material is of mainly cubic (3C) SiC polytype. For certain conditions, like high deposition pressure and high filament temperature, additional hexagonal phase and/or stacking faults can be observed. P-type µc-SiC:H thin films with optical band gap E04 ranging from 2.0 to 2.8 eV and dark conductivity ranging from 10-5 to 0.1 S/cm can be prepared. Such transparent and conductive p-type µc-SiC:H thin films were applied in thin film silicon solar cells as the window layer, resulting in an improved quantum efficiency at wavelengths below 480 nm.

  5. Effect of composition of titanium in silver-copper-titanium braze alloy on dissimilar laser brazing of binder-less cubic boron nitride and tungsten carbide

    Science.gov (United States)

    Sechi, Yoshihisa; Nagatsuka, Kimiaki; Nakata, Kazuhiro

    2014-08-01

    Laser brazing with Ti as an active element in silver-copper alloy braze metal has been carried out for binder-less cubic boron nitride and tungsten carbide, using silver-copper- titanium braze alloys with titanium content that varied between 0.28 mass% and 1.68 mass%. Observations of the interface using electron probe microanalysis and scanning acoustic microscopy show that efficient interface adhesion between binder-less cubic boron nitride and the silver-copper-titanium braze alloy was achieved for the braze with a titanium content of 0. 28 mass%.

  6. The effect of a weak W/SiC interface on the strength of sigma silicon carbide monofilament

    Science.gov (United States)

    Dyos; Shatwell

    1999-11-01

    Fractography studies have shown that the strength-determining flaws in silicon carbide monofilaments are generally at the core/silicon carbide interface or in the vicinity of the outside, carbon-based coating. In tungsten-cored monofilaments like DERA Sigma, the W/SiC flaws primarily determine the strength. Fracture is accompanied by brittle failure of the tungsten. The crack propagates simultaneously outwards through the silicon carbide, inwards through the tungsten and also around the W/SiC interface before being deflected into the tungsten or out through the silicon carbide. Experiments depositing boundary layers between the tungsten and silicon carbide have resulted in significantly different fracture behaviour. The tungsten fails in a ductile manner and the strength-determining flaws are located predominantly at the outside surface of the silicon carbide. This behaviour is discussed in terms of models proposed by E. Martin and W. Curtin. It is thought that the work will ultimately lead to a significantly stronger, tungsten-based monofilament.

  7. Influence of Nanosized Silicon Carbide on Dimensional Stability of Al/SiC Nanocomposite

    Directory of Open Access Journals (Sweden)

    S. M. Zebarjad

    2008-01-01

    Full Text Available This study concentrated on the role of particle size of silicon carbide (SiC on dimensional stability of aluminum. Three kinds of Al/SiC composite reinforced with different SiC particle sizes (25 μm, 5 μm, and 70 nm were produced using a high-energy ball mill. The standard samples were fabricated using powder metallurgy method. The samples were heated from room temperature up to 500∘C in a dilatometer at different heating rates, that is, 10, 30, 40, and 60∘C/min. The results showed that for all materials, there was an increase in length change as temperature increased and the temperature sensitivity of aluminum decreased in the presence of both micro- and nanosized silicon carbide. At the same condition, dimensional stability of Al/SiC nanocomposite was better than conventional Al/SiC composites.

  8. Mass production of beta-silicon carbide nanofibers by the novel method of Forcespinning

    Science.gov (United States)

    Salinas, Alfonso

    Non-oxide Ceramics such as silicon carbide have very unique properties, for example high toughness, thermal stability, wear resistant, and thermal shock resistance these properties make these ceramic fibers excellent for high temperature applications. Here we present the development of Silicon Carbide nanofibers utilizing a Polystyrene/Polycarbomethylsilane solution as the precursor materials. The ForcespinningRTM was performed under a controlled nitrogen environment to prevent fiber oxidation. Characterization was conducted using scanning electron microscopy, x-ray diffraction, and thermogravimetric analysis. The results show successful formation of high yield, long continuous bead-free nanofibers with diameters ranging from 280nm to 2 micron depending on the selected processing parameters. The sintered precursors show formation of SiC nanofibers with a beta phase crystalline structure and oxygen content below 15%.

  9. Laser synthesis of silicon carbide powders from silane and hydrocarbon mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Cauchetier, M.; Croix, O.; Luce, M. (CEN Saclay, Gis sur Yvette (France))

    1988-11-01

    Ultrafine silicon carbide powders have been synthesized from mixtures of silane and hydrocarbons (with one to four carbon atoms) irradiated with an unfocused, high-power (1 kW), continuous-wave industrial CO{sub 2} laser. The chemistry of the reaction has been determined by analysis of the gaseous phase, either by infrared spectroscopy or by combined-gas chromatography-mass spectrometry; reaction yields have been determined. A silicon carbide production rate of 30 g/h with a yield > 99% was obtained from silane and acetylene mixtures with a 600-W laser power. An attempt to approach a production rate of 100 g/h at laboratory scale has been successful. Powder characteristics, such as particle size (10 to 50 nm), crystallinity, and stoichiometry can be controlled through optimization of laser intensity, gas pressure, and flow rate. The powders consist of equiaxed particles which exhibit a narrow size distribution.

  10. Magnetic field and temperature sensing with atomic-scale spin defects in silicon carbide.

    Science.gov (United States)

    Kraus, H; Soltamov, V A; Fuchs, F; Simin, D; Sperlich, A; Baranov, P G; Astakhov, G V; Dyakonov, V

    2014-07-04

    Quantum systems can provide outstanding performance in various sensing applications, ranging from bioscience to nanotechnology. Atomic-scale defects in silicon carbide are very attractive in this respect because of the technological advantages of this material and favorable optical and radio frequency spectral ranges to control these defects. We identified several, separately addressable spin-3/2 centers in the same silicon carbide crystal, which are immune to nonaxial strain fluctuations. Some of them are characterized by nearly temperature independent axial crystal fields, making these centers very attractive for vector magnetometry. Contrarily, the zero-field splitting of another center exhibits a giant thermal shift of -1.1 MHz/K at room temperature, which can be used for thermometry applications. We also discuss a synchronized composite clock exploiting spin centers with different thermal response.

  11. Insight into the mechanisms of chemical doping of graphene on silicon carbide.

    Science.gov (United States)

    Giannazzo, Filippo

    2016-02-19

    Graphene (Gr) is currently the object of intense research investigations, owing to its rich physics and wide potential for applications. In particular, epitaxial Gr on silicon carbide (SiC) holds great promise for the development of new device concepts based on the vertical current transport at Gr/SiC heterointerface. Precise tailoring of Gr workfunction (WF) represents a key requirement for these device structures. In this context, Günes et al (2015 Nanotechnology 26 445702) recently reported a straightforward approach for WF modulation in epitaxial Gr on silicon carbide by using nitric acid solutions at different dilutions. This paper provides a deep insight on the peculiar mechanisms of chemical doping of epitaxial Gr on 4H-SiC(0001), using several characterization techniques (Raman, UPS, AFM) and density functional theory calculations. The relevance of these findings and their perspective applications in emerging device concepts based on monolithic integration of Gr and SiC will be discussed.

  12. Mechanical properties of chiral and achiral silicon carbide nanotubes under oxygen chemisorption.

    Science.gov (United States)

    Ansari, R; Mirnezhad, M; Hosseinzadeh, M

    2015-03-01

    In this paper, the mechanical properties of fully oxygenated silicon carbide nanotubes (O2-SiCNTs) are explored using a molecular mechanics model joined with the density functional theory (DFT). The closed-form analytical expressions suggested in this study can easily be adapted for nanotubes with different chiralities. The force constants of molecular mechanics model proposed herein are derived through DFT within a generalized gradient approximation. Moreover, the mechanical properties of fully oxygenated silicon carbide (O2-SiC) sheet are evaluated for the case that the oxygen atoms are adsorbed on one side of the SiC sheet. According to the results obtained for the bending stiffness of O2-SiC sheet, one can conclude that the O2-SiC sheet has isotropic characteristics.

  13. Effect of Density and Surface Roughness on Optical Properties of Silicon Carbide Optical Components

    Institute of Scientific and Technical Information of China (English)

    LIU Gui-Ling; HUANG Zheng-Ren; LIU Xue-Jian; JIANG Dong-Liang

    2008-01-01

    @@ The effect of density and surface roughness on the optical properties of silicon carbide optical components is investigated.The density is the major factor of the total reflectance while the surface roughness is the major factor of the diffuse reflectance.The specular reflectance of silicon carbide optical components can be improved by increasing the density and decreasing the surface roughness,in the form of reducing bulk absorption and surface-related scattering,respectively.The contribution of the surface roughness to the specular reflectance is much greater than that of the density.When the rms surface roughness decreases to 2.228nm,the specular reflectance decreases to less than 0.7% accordingly.

  14. Densification studies of silicon carbide-based ceramics with yttria, silica and alumina as sintering additives

    Directory of Open Access Journals (Sweden)

    J. Marchi

    2001-10-01

    Full Text Available Silicon carbide has been extensively used in structural applications, especially at high temperatures. In this work, Y2O3, Al2O3 and SiO2 were added to beta-SiC in order to obtain highly dense ceramics. Sintering was conducted in a dilatometer and in a graphite resistance furnace and the densification behaviour was studied. Sintered samples were characterised by density measurements, the crystalline phases were identified by X-ray diffraction. Microstructural observation of polished and polished/etched samples was carried out with help of scanning electron microscopy. Silicon carbide ceramics with more than 90% of the theoretical density were obtained by pressureless sintering if a suitable proportion of the additives is used.

  15. The effects of cold rolling and heat treatment on Al 6063 reinforced with silicon carbide granules

    Science.gov (United States)

    Balogun, S. A.; Adeosun, S. O.; Sanni, O. S.

    2009-08-01

    The effects of cold rolling and heat treatment on the strength and ductility of aluminum alloy 6063 reinforced with silicon carbide granules have been examined. Silicon carbide (SiCp) 100 μm grain size was added to 6063 aluminum in volume fractions of 0-30% to produce samples for heat treatment and cold rolling. The results show that an optimum combination of strength and ductility at 137.92 MPa and true strain of 0.173 is achievable with rolled-and-tempered samples containing 10% SiCp. This is a significant improvement on 6063 aluminum alloy having an ultimate tensile strength of ˜100 MPa at true strain of 0.18.

  16. Investigation of the electrical conductivity and structurization of disperse-organic powdered titanium and silicon carbides

    Energy Technology Data Exchange (ETDEWEB)

    Zhigotskii, A.G.; Fomenko, E.B.; Deinega, Y.F. [Institute of Colloid Chemistry and Water Chemistry, Kiev (Ukraine)

    1995-05-01

    Disperse systems based on carbides of high melting metals are of considerable scientific and practical interest for the devising of new methods of obtaining them and extending their fields of application in various branches of engineering. Particularly important in this respect are carbide containing materials with anisotropic structure in whose formation electric fields, in addition to mechanical, thermal, chemical, and other technological factors, may play an important, if not the decisive role. Here the authors present the results of the investigation of the electrical conductivity of disperse micropowders of TiC and SiC in vaseline oil and in polyester, and also in processes of their structurization in an electric field. According to the data of sedimentographic analysis the mean particle size of powdered titanium carbide marque KTM (TU 88 USSR 147.012-71) and of silicon carbide (OST 71-1-82) was 5-7 {mu}m. To remove the iron whose content did not exceed 0.5 and 0.3 (wt.)%, respectively, the powdered carbides were treated with hydrochloric acid, and then with distilled water.

  17. Effect of thermomechanical treatments on the aging response of centrifugally cast silicon carbide/aluminum composites

    OpenAIRE

    May, Christopher William

    1992-01-01

    Approved for public release; distribution is unlimited Differential scanning calorimetry was conducted using centrifugally cast monolithic A3356 aluminum material and 26 volume present silicon carbide (SiC) particle reinforced A356 aluminum matrix composite material in as-cast, cast and rolled, and cast and extruded conditions. Electrical resistivity and matrix micro-hardness measurements during isothermal aging treatments were also conducted. The effects of thermo-mechanical processing ...

  18. Silicon carbide whisker composites. (Latest citations from Engineered Materials abstracts). NewSearch

    Energy Technology Data Exchange (ETDEWEB)

    1994-11-01

    The bibliography contains citations concerning the manufacture and applications of silicon carbide whisker reinforced composites. Citations discuss the preparation of whiskers and the processing of composites containing the whiskers. Applications include aerospace engines, automotive components, engine components, and surgical implants. Physical properties such as bending strength, crack propagation, creep, fracture toughness, and stress strain curves are covered. Ceramic matrix, metal matrix, and carbon-carbon composites are examined. (Contains a minimum of 248 citations and includes a subject term index and title list.)

  19. Silicon Carbide-Based Hydrogen Gas Sensors for High-Temperature Applications

    OpenAIRE

    Sangchoel Kim; Jehoon Choi; Minsoo Jung; Seongjeen Kim; Sungjae Joo

    2013-01-01

    We investigated SiC-based hydrogen gas sensors with metal-insulator-semiconductor (MIS) structure for high temperature process monitoring and leak detection applications in fields such as the automotive, chemical and petroleum industries. In this work, a thin tantalum oxide (Ta2O5) layer was exploited with the purpose of sensitivity improvement, because tantalum oxide has good stability at high temperature with high permeability for hydrogen gas. Silicon carbide (SiC) was used as a substrate ...

  20. Effect of thermomechanical treatments on the aging response of centrifugally cast silicon carbide/aluminum composites

    OpenAIRE

    May, Christopher William

    1992-01-01

    Approved for public release; distribution is unlimited Differential scanning calorimetry was conducted using centrifugally cast monolithic A3356 aluminum material and 26 volume present silicon carbide (SiC) particle reinforced A356 aluminum matrix composite material in as-cast, cast and rolled, and cast and extruded conditions. Electrical resistivity and matrix micro-hardness measurements during isothermal aging treatments were also conducted. The effects of thermo-mechanical processing ...

  1. Near-Field Radiative Heat Transfer between Metamaterials coated with Silicon Carbide Film

    OpenAIRE

    Basu, Soumyadipta; YANG, YUE; Wang, Liping

    2014-01-01

    In this letter, we study the near-field radiative heat transfer between two metamaterial substrates coated with silicon carbide (SiC) thin films. It is known that metamaterials can enhance the near-field heat transfer over ordinary materials due to excitation of magnetic plasmons associated with s polarization, while strong surface phonon polariton exists for SiC.By careful tuning of the optical properties of metamaterial it is possible to excite electrical and magnetic resonance for the meta...

  2. The Effects of Thermal Cycling on Gallium Nitride and Silicon Carbide Semiconductor Devices for Aerospace Use

    Science.gov (United States)

    Patterson, Richard L.; Hammoud, Ahmad

    2012-01-01

    Electronics designed for use in NASA space missions are required to work efficiently and reliably under harsh environment conditions. These Include radiation, extreme temperatures, thermal cycling, to name a few. Preliminary data obtained on new Gallium Nitride and Silicon Carbide power devices under exposure to radiation followed by long term thermal cycling are presented. This work was done in collaboration with GSFC and JPL in support of the NASA Electronic Parts and Packaging (NEPP) Program

  3. Irradiation creep of nano-powder sintered silicon carbide at low neutron fluences

    Energy Technology Data Exchange (ETDEWEB)

    Koyanagi, Takaaki [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Shimoda, Kazuya [Kyoto Univ., Kyoto (Japan); Kondo, Sosuke [Kyoto Univ., Kyoto (Japan); Hinoki, Tatsuya [Kyoto Univ., Kyoto (Japan); Ozawa, Kazumi [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Katoh, Yutai [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

    2014-12-01

    The irradiation creep behavior of nano-powder sintered silicon carbide was investigated using the bend stress relaxation method under neutron irradiation up to 1.9 dpa. The creep deformation was observed at all temperatures ranging from 380 to 1180 °C mainly from the irradiation creep but with the increasing contributions from the thermal creep at higher temperatures. Microstructural observation and data analysis were performed.

  4. Synthesis of silicon carbide nanowires in a catalyst-assisted process

    Science.gov (United States)

    Deng, S. Z.; Wu, Z. S.; Zhou, Jun; Xu, N. S.; Chen, Jian; Chen, Jun

    2002-04-01

    At elevated temperatures, silicon carbide nanowires were synthesized in a catalyst-assisted process using aluminum as a catalyst. Transmission electron microscopy shows that the nanowires are around 20 nm in diameter and around 2 μm in length. High resolution transmission electron microscopy shows that the nanowires are crystalline β-SiC. Raman spectra show the typical features of nano-SiC. A model based on vapor-liquid-solid process is proposed to explain our finding.

  5. High Power Silicon Carbide (SiC) Power Processing Unit Development

    Science.gov (United States)

    Scheidegger, Robert J.; Santiago, Walter; Bozak, Karin E.; Pinero, Luis R.; Birchenough, Arthur G.

    2015-01-01

    NASA GRC successfully designed, built and tested a technology-push power processing unit for electric propulsion applications that utilizes high voltage silicon carbide (SiC) technology. The development specifically addresses the need for high power electronics to enable electric propulsion systems in the 100s of kilowatts. This unit demonstrated how high voltage combined with superior semiconductor components resulted in exceptional converter performance.

  6. Ti添加方式对表面无立方相层梯度硬质合金的影响%Effect of Method of Adding Ti on Functionally Graded Cemented Carbides with Cubic Carbide Free Layer

    Institute of Scientific and Technical Information of China (English)

    冯燕; 任达平; 望军

    2011-01-01

    表面无立方相层梯度硬质合金是一种非常好的涂层刀具基体材料,近年来越来越受到重视.本文主要研究了Ti添加方式对于表面无立方相层梯度硬质合金的影响.研究发现,相对于添加TiN、TiC,添加TiCN得到的表面无立方相层梯度硬质合金综合性能更好.%The functionally graded cemented carbides with cubic carbide free layer is a kind of good substrate material for coating tool. So they were paied more and more attention in recent years. This paper researched the effect of the method of adding Ti on the functionally graded cemented carbides with cubic carbide free layer. It was found that adding TiCN was better than adding TiN and TiC.

  7. Kinetics of thermal oxidation of 6H silicon carbide in oxygen plus trichloroethylene

    OpenAIRE

    Yang, BL; Lin, LM; Lo, HB; Lai, PT; Chan, CL

    2005-01-01

    In this work, the behaviors of the trichloroethylene (TCE) thermal oxidation of 6H silicon carbide (SiC) are investigated. The oxide growth of 6H SiC under different TCE concentrations (ratios of TCE to O2) follows the linear-parabolic oxidation law derived for silicon oxidation by Deal and Grove, J. Appl. Phys., 36 (1965). The oxidation rate with TCE is much higher than that without TCE and strongly depends on the TCE ratio in addition to oxidation temperature and oxidation time. The increas...

  8. Structural and electronic properties of boron-doped double-walled silicon carbide nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Behzad, Somayeh, E-mail: somayeh.behzad@gmail.co [Physics Department, Faculty of Science, Razi University, Kermanshah (Iran, Islamic Republic of); Moradian, Rostam [Physics Department, Faculty of Science, Razi University, Kermanshah (Iran, Islamic Republic of); Nano Science and Technology Research Center, Razi University, Kermanshah (Iran, Islamic Republic of); Computational Physical Science Research Laboratory, Department of Nano Science, Institute for Studies in Theoretical Physics and Mathematics (IPM), P.O. Box 19395-5531, Tehran (Iran, Islamic Republic of); Chegel, Raad [Physics Department, Faculty of Science, Razi University, Kermanshah (Iran, Islamic Republic of)

    2010-12-01

    The effects of boron doping on the structural and electronic properties of (6,0)-(14,0) double-walled silicon carbide nanotube (DWSiCNT) are investigated by using spin-polarized density functional theory. It is found that boron atom could be more easily doped in the inner tube. Our calculations indicate that a Si site is favorable for B under C-rich condition and a C site is favorable under Si-rich condition. Additionally, B-substitution at either single carbon or silicon atom site in DWSiCNT could induce spontaneous magnetization.

  9. Rf-plasma synthesis of nanosize silicon carbide and nitride. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Buss, R.J.

    1997-02-01

    A pulsed rf plasma technique is capable of generating ceramic particles of 10 manometer dimension. Experiments using silane/ammonia and trimethylchlorosilane/hydrogen gas mixtures show that both silicon nitride and silicon carbide powders can be synthesized with control of the average particle diameter from 7 to 200 nm. Large size dispersion and much agglomeration appear characteristic of the method, in contrast to results reported by another research group. The as produced powders have a high hydrogen content and are air and moisture sensitive. Post-plasma treatment in a controlled atmosphere at elevated temperature (800{degrees}C) eliminates the hydrogen and stabilizes the powder with respect to oxidation or hydrolysis.

  10. Synthesis of silicon carbide nanowires by solid phase source chemical vapor deposition

    Institute of Scientific and Technical Information of China (English)

    NI Jie; LI Zhengcao; ZHANG Zhengjun

    2007-01-01

    In this paper,we report a simple approach to synthesize silicon carbide(SiC)nanowires by solid phase source chemical vapor deposition(CVD) at relatively low temperatures.3C-SiC nanowires covered by an amorphous shell were obtained on a thin film which was first deposited on silicon substrates,and the nanowires are 20-80 am in diameter and several μm in length,with a growth direction of[200].The growth of the nanowires agrees well on vapor-liquid-solid (VLS)process and the film deposited on the substrates plays an important role in the formation of nanowires.

  11. Epitaxy of nanocrystalline silicon carbide on Si(111) at room temperature.

    Science.gov (United States)

    Verucchi, Roberto; Aversa, Lucrezia; Nardi, Marco V; Taioli, Simone; a Beccara, Silvio; Alfè, Dario; Nasi, Lucia; Rossi, Francesca; Salviati, Giancarlo; Iannotta, Salvatore

    2012-10-24

    Silicon carbide (SiC) has unique chemical, physical, and mechanical properties. A factor strongly limiting SiC-based technologies is the high-temperature synthesis. In this work, we provide unprecedented experimental and theoretical evidence of 3C-SiC epitaxy on silicon at room temperature by using a buckminsterfullerene (C(60)) supersonic beam. Chemical processes, such as C(60) rupture, are activated at a precursor kinetic energy of 30-35 eV, far from thermodynamic equilibrium. This result paves the way for SiC synthesis on polymers or plastics that cannot withstand high temperatures.

  12. Feasibility of Electrochemical Deposition of Nickel/Silicon Carbide Fibers Composites over Nickel Superalloys

    Science.gov (United States)

    Ambrosio, E. P.; Abdul Karim, M. R.; Pavese, M.; Biamino, S.; Badini, C.; Fino, P.

    2017-02-01

    Nickel superalloys are typical materials used for the hot parts of engines in aircraft and space vehicles. They are very important in this field as they offer high-temperature mechanical strength together with a good resistance to oxidation and corrosion. Due to high-temperature buckling phenomena, reinforcement of the nickel superalloy might be needed to increase stiffness. For this reason, it was thought to investigate the possibility of producing composite materials that might improve properties of the metal at high temperature. The composite material was produced by using electrochemical deposition method in which a composite with nickel matrix and long silicon carbide fibers was deposited over the nickel superalloy. The substrate was Inconel 718, and monofilament continuous silicon carbide fibers were chosen as reinforcement. Chemical compatibility was studied between Inconel 718 and the reinforcing fibers, with fibers both in an uncoated condition, and coated with carbon or carbon/titanium diboride. Both theoretical calculations and experiments were conducted, which suggested the use of a carbon coating over the fibers and a buffer layer of nickel to avoid unwanted reactions between the substrate and silicon carbide. Deposition was then performed, and this demonstrated the practical feasibility of the process. Yield strength was measured to detect the onset of interface debonding between the substrate and the composite layer.

  13. Aluminum nitride-silicon carbide whisker composites: Processing, properties, and microstructural stability

    Energy Technology Data Exchange (ETDEWEB)

    Cross, M.T.

    1990-01-01

    Aluminum nitride -- silicon carbide whisker composites with up to 20 vol % whiskers were fabricated by pressureless sintering (1750{degree}--1800{degree}C) and by hot-pressing (1700{degree}--1800{degree}C). Silicon carbide whiskers were found to degrade depending on the type of protective powder bed used during sintering. Whiskers were found to degraded in high oxygen containing samples by reaction with sintering additives. Whisker degradation was also due to the formation of silicon carbide -- aluminum nitride solid solution. No whisker degradation was observed in hot-pressed samples. For these samples Young's modulus and fracture toughness were measured. A 33% increase in the fracture toughness was measured by the indentation technique for a 20 vol % whisker composite. Operative toughening mechanisms were investigated using scanning electron microscopy. Crack deflection and whisker bridging were the dominant mechanisms. It was also shown that load transfer from matrix to whiskers can be a contributing factor to toughening. 88 refs., 34 figs., 11 tabs.

  14. Hollow silicon carbide nanoparticles from a non-thermal plasma process

    Science.gov (United States)

    Coleman, Devin; Lopez, Thomas; Yasar-Inceoglu, Ozgul; Mangolini, Lorenzo

    2015-05-01

    We demonstrate the synthesis of hollow silicon carbide nanoparticles via a two-step process involving the non-thermal plasma synthesis of silicon nanoparticles, followed by their in-flight carbonization, also initiated by a non-thermal plasma. Simple geometric considerations associated with the expansion of the silicon lattice upon carbonization, in combination of the spherical geometry of the system, explain the formation of hollow nanostructures. This is in contrast with previous reports that justify the formation of hollow particles by means of out-diffusion of the core element, i.e., by the Kirkendall nanoscale effect. A theoretical analysis of the diffusion kinetics indicates that interaction with the ionized gas induces significant nanoparticle heating, allowing for the fast transport of carbon into the silicon particle and for the subsequent nucleation of the beta-silicon carbide phase. This work confirms the potential of non-thermal plasma processes for the synthesis of nanostructures composed of high-melting point materials, and suggests that such processes can be tuned to achieve morphological control.

  15. Low Temperature Hall Measurements of Neutron Irradiated Silicon Carbide

    Science.gov (United States)

    2004-03-01

    neutron absorption cross section . Silicon and carbon both possess small neutron absorption cross sections. Additionally, most silicon and...0 4 1.0E+0 5 1.0E+0 6 1.0E+0 7 1.0E+0 8 Neutron Energy [eV] C a p tu re C ro ss S e ct io n [ b a rn s] Figure 17: Cadmium neutron absorption cross section as... absorption cross section as a function of energy. Cadmium has the unique property of a large thermal cross

  16. Silicon Carbide Diodes Characterization at High Temperature and Comparison With Silicon Devices

    Science.gov (United States)

    Lebron-Velilla, Ramon C.; Schwarze, Gene E.; Gardner, Brent G.; Adams, Jerry D., Jr.

    2004-01-01

    Commercially available silicon carbide (SiC) Schottky diodes from different manufacturers rated at 200, 300, 600, and 1200 V, were electrically tested and characterized as a function of temperature up to 300 C. Electrical tests included both steady state and dynamic tests. Steady state tests produced forward and reverse I-V characteristic curves. Transient tests evaluated the switching performance of the diodes in either a hard-switched DC to DC buck converter or a half-bridge boost converter. For evaluation and comparison purposes, the same tests were performed with current state-of-the-art ultra fast silicon (Si) pn-junction diodes of similar ratings and also a Si Schottky diode. The comparisons made were forward voltage drop at rated current, reverse current at rated voltage, and turn-off peak reverse recovery current and reverse recovery time. In addition, efficiency measurements were taken for the buck DC to DC converter using both the SiC Schottky diodes and the Si pn-junction diodes at different temperatures and frequencies. The test results showed that at high temperature, the forward voltage drop for SiC Schottky diodes is higher than the forward drop of the ultra fast Si pn-junction diodes. As the temperature increased, the forward voltage drop of the SiC Schottky increased while for the ultra fast Si pn-junction diodes, the forward voltage drop decreased as temperature increased. For the elevated temperature steady state reverse voltage tests, the SiC Schottky diodes showed low leakage current at their rated voltage. Likewise, for the transient tests, the SiC Schottky diodes displayed low reverse recovery currents over the range of temperatures tested. Conversely, the Si pn-junction diodes showed increasing peak reverse current values and reverse recovery times with increasing temperature. Efficiency measurements in the DC to DC buck converter showed the advantage of the SiC Schottky diodes over the ultra fast Si pn-junction diodes, especially at the

  17. Microalloying Boron Carbide with Silicon to Achieve Dramatically Improved Ductility.

    Science.gov (United States)

    An, Qi; Goddard, William A

    2014-12-01

    Boron carbide (B4C) is a hard material whose value for extended engineering applications such as body armor; is limited by its brittleness under impact. To improve the ductility while retaining hardness, we used density functional theory to examine modifying B4C ductility through microalloying. We found that replacing the CBC chain in B4C with Si-Si, denoted as (B11Cp)-Si2, dramatically improves the ductility, allowing a continuous shear to a large strain of 0.802 (about twice of B4C failure strain) without brittle failure. Moreover, (B11C)-Si2 retains low density and high hardness. This ductility improvement arises because the Si-Si linkages enable the icosahedra accommodate additional shear by rotating instead of breaking bonds.

  18. Formation of Al2O3-HfO2 Eutectic EBC Film on Silicon Carbide Substrate

    Directory of Open Access Journals (Sweden)

    Kyosuke Seya

    2015-01-01

    Full Text Available The formation mechanism of Al2O3-HfO2 eutectic structure, the preparation method, and the formation mechanism of the eutectic EBC layer on the silicon carbide substrate are summarized. Al2O3-HfO2 eutectic EBC film is prepared by optical zone melting method on the silicon carbide substrate. At high temperature, a small amount of silicon carbide decomposed into silicon and carbon. The components of Al2O3 and HfO2 in molten phase also react with the free carbon. The Al2O3 phase reacts with free carbon and vapor species of AlO phase is formed. The composition of the molten phase becomes HfO2 rich from the eutectic composition. HfO2 phase also reacts with the free carbon and HfC phase is formed on the silicon carbide substrate; then a high density intermediate layer is formed. The adhesion between the intermediate layer and the substrate is excellent by an anchor effect. When the solidification process finished before all of HfO2 phase is reduced to HfC phase, HfC-HfO2 functionally graded layer is formed on the silicon carbide substrate and the Al2O3-HfO2 eutectic structure grows from the top of the intermediate layer.

  19. Ohmic Contacts for High Temperature Integrated Circuits in Silicon Carbide

    OpenAIRE

    2014-01-01

    In electrical devices and integrated circuits, ohmic contacts are necessary and a prerequisite for the current transport over the metal-semiconductor junctions. At the same time, a desired property of the ohmic contacts is to not add resistance or in other way disturb the performance. For high temperature electronics, the material demands are high regarding functionality and stability at elevated working temperatures, during and after temperature cycling and during long time of use.  Silicon ...

  20. Isotopic heterogeneity in synthetic and natural silicon carbide

    OpenAIRE

    Shiryaev, A. A.; Michael Wiedenbeck; Reutsky, V.; Polyakov, V.B.; Mel'nik, N. N.; Lebedev, A. A.; Yakimova, R.

    2008-01-01

    The distribution of both carbon and silicon isotopes in synthetic sublimation growth SiC wafers and in natural SiC grains was studied using secondary ion mass-spectrometry (SIMS). Significant variations in both isotopic ratios were observed which were broadly correlated with the crystalline perfection as documented by Raman microspectroscopy. Domains consisting of 15R (or with its admixture) are, on average, enriched in 12C isotope relative to 6H domains, and they also show larger scatter in ...

  1. Amorphous Silicon Carbide Passivating Layers to Enable Higher Processing Temperature in Crystalline Silicon Heterojunction Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Boccard, Mathieu [Arizona State Univ., Mesa, AZ (United States); Holman, Zachary [Arizona State Univ., Mesa, AZ (United States)

    2015-04-06

    "Very efficient crystalline silicon (c-Si) solar cells have been demonstrated when thin layers of intrinsic and doped hydrogenated amorphous silicon (a-Si:H) are used for passivation and carrier selectivity in a heterojunction device. One limitation of this device structure is the (parasitic) absorption in the front passivation/collection a-Si:H layers; another is the degradation of the a-Si:H-based passivation upon temperature, limiting the post-processes to approximately 200°C thus restricting the contacting possibilities and potential tandem device fabrication. To alleviate these two limitations, we explore the potential of amorphous silicon carbide (a-SiC:H), a widely studied material in use in standard a-Si:H thin-film solar cells, which is known for its wider bandgap, increased hydrogen content and stronger hydrogen bonding compared to a-Si:H. We study the surface passivation of solar-grade textured n-type c-Si wafers for symmetrical stacks of 10-nm-thick intrinsic a-SiC:H with various carbon content followed by either p-doped or n-doped a-Si:H (referred to as i/p or i/n stacks). For both doping types, passivation (assessed through carrier lifetime measurements) is degraded by increasing the carbon content in the intrinsic a-SiC:H layer. Yet, this hierarchy is reversed after annealing at 350°C or more due to drastic passivation improvements upon annealing when an a-SiC:H layer is used. After annealing at 350°C, lifetimes of 0.4 ms and 2.0 ms are reported for i/p and i/n stacks, respectively, when using an intrinsic a-SiC:H layer with approximately 10% of carbon (initial lifetimes of 0.3 ms and 0.1 ms, respectively, corresponding to a 30% and 20-fold increase, respectively). For stacks of pure a-Si:H material the lifetimes degrade from 1.2 ms and 2.0 ms for i/p and i/n stacks, respectively, to less than 0.1 ms and 1.1 ms (12-fold and 2-fold decrease, respectively). For complete solar cells using pure a-Si:H i/p and i/n stacks, the open-circuit voltage (Voc

  2. Titanium Carbide and Silicon Carbide Thermal Conductivity under Heavy Ions Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Cabrero, J.; Weisbecker, P.; Pailler, R. [LCTS, F-33600 Pessac (France); Cabrero, J.; Audubert, F. [CEA Cadarache, DEN 13108 Saint Paul Iez Durance (France); Kusiak, A. [TREFLE, Esplanade des Arts et Metiers 33405 Talence Cedex (France)

    2010-07-01

    SiC(f)/SiC ceramic matrix composites (CMC) are considered as structural materials in next generation fission nuclear reactors. However, thermal conductivity of SiC is reduced on the one hand at the highest temperatures, but also under irradiation. Titanium carbide, because of its peculiar thermal properties is an attractive material to be used as a matrix in a CMC to enhance the thermal conductivity of CMC under irradiation and at high temperature. In this study, we performed irradiation experiments on TiC, TiC{sub x}SiC{sub 1-x} and SiC samples, with heavy ions at room temperature (74 MeV Kr, fluence from 10{sup 13} to 10{sup 15} ions/cm{sup 2}). This energy results in an irradiated layer of about 7 {mu}m for TiC. Thermal conductivity of the irradiated layer is measured using IR radiometry as a function of fluence and composition. The structural evolution of the irradiated samples was investigated by Raman micro spectroscopy and transmission electron microscopy. (authors)

  3. Selective Purcell enhancement of two closely linked zero-phonon transitions of a silicon carbide color center

    CERN Document Server

    Bracher, David O; Hu, Evelyn L

    2016-01-01

    Point defects in silicon carbide are rapidly becoming a platform of great interest for single photon generation, quantum sensing, and quantum information science. Photonic crystal cavities (PCC) can serve as an efficient light-matter interface both to augment the defect emission and to aid in studying the defects' properties. In this work, we fabricate 1D nanobeam PCCs in 4H-silicon carbide with embedded silicon vacancy centers. These cavities are used to achieve Purcell enhancement of two closely spaced defect zero-phonon lines (ZPL). Enhancements of >80-fold are measured using multiple techniques. Additionally, the nature of the cavity coupling to the different ZPLs is examined.

  4. Investigation on the preparation of Si/mullite/Yb_2Si_2O_7 environmental barrier coatings onto silicon carbide

    Institute of Scientific and Technical Information of China (English)

    许越; 闫钊通

    2010-01-01

    With the development of aero-engine,gas import temperatures of hot section structural materials are increasingly higher.Metal alloy materials due to the rapidly decreased mechanical properties at relative high temperature are gradually replaced with silicon-based non-oxide silicon carbide ceramics.However,silicon carbide ceramic materials tend to spall and deform in engine combustion environment,need environmental barrier coatings for the protection of the matrix.The preparation of Si/mullite/Yb2Si2O7 envir...

  5. MIS capacitor studies on silicon carbide single crystals

    Science.gov (United States)

    Kopanski, J. J.

    1990-01-01

    Cubic SIC metal-insulator-semiconductor (MIS) capacitors with thermally grown or chemical-vapor-deposited (CVD) insulators were characterized by capacitance-voltage (C-V), conductance-voltage (G-V), and current-voltage (I-V) measurements. The purpose of these measurements was to determine the four charge densities commonly present in an MIS capacitor (oxide fixed charge, N(f); interface trap level density, D(it); oxide trapped charge, N(ot); and mobile ionic charge, N(m)) and to determine the stability of the device properties with electric-field stress and temperature. The section headings in the report include the following: Capacitance-voltage and conductance-voltage measurements; Current-voltage measurements; Deep-level transient spectroscopy; and Conclusions (Electrical characteristics of SiC MIS capacitors).

  6. Development of transparent polycrystalline beta-silicon carbide

    Science.gov (United States)

    Bayya, Shyam S.; Villalobos, Guillermo R.; Hunt, Michael P.; Sanghera, Jasbinder S.; Sadowski, Bryan M.; Aggarwal, Ishwar D.; Cinibulk, Michael; Carney, Carmen; Keller, Kristin

    2013-09-01

    Transparent beta-SiC is of great interest because its high strength, low coefficient of thermal expansion, very high thermal conductivity, and cubic crystal structure give it a very high thermal shock resistance. A transparent, polycrystalline beta-SiC window will find applications in armor, hypersonic missiles, and thermal control for thin disc lasers. SiC is currently available as either small transparent vapor grown disks or larger opaque shapes. Neither of which are useful in window applications. We are developing sintering technology to enable transparent SiC ceramics. This involves developing procedures to make high purity powders and studying their densification behavior. We have been successful in demonstrating transparency in thin sections using Field Assisted Sintering Technology (FAST). This paper will discuss the reaction mechanisms in the formation of beta-SiC powder and its sintering behavior in producing transparent ceramics.

  7. Formation of boron nitride coatings on silicon carbide fibers using trimethylborate vapor

    Science.gov (United States)

    Yuan, Mengjiao; Zhou, Tong; He, Jing; Chen, Lifu

    2016-09-01

    High quality boron nitride (BN) coatings have been grown on silicon carbide (SiC) fibers by carbothermal nitridation and at atmospheric pressure. SiC fibers were first treated in chlorine gas to form CDC (carbide-derived carbon) film on the fiber surface. The CDC-coated SiC fibers were then reacted with trimethylborate vapor and ammonia vapor at high temperature, forming BN coatings by carbothermal reduction. The FT-IR, XPS, XRD, SEM, TEM and AES were used to investigate the formation of the obtained coatings. It has been found that the obtained coatings are composed of phase mixture of h-BN and amorphous carbon, very uniform in thickness, have smooth surface and adhere well with the SiC fiber substrates. The BN-coated SiC fibers retain ∼80% strength of the as-received SiC fibers and show an obvious interfacial debonding and fiber pullout in the SiCf/SiOC composites. This method may be useful for the large scale production of high quality BN coating on silicon carbide fiber.

  8. Formation of boron nitride coatings on silicon carbide fibers using trimethylborate vapor

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Mengjiao; Zhou, Tong; He, Jing; Chen, Lifu, E-mail: lfchen@xmu.edu.cn

    2016-09-30

    High quality boron nitride (BN) coatings have been grown on silicon carbide (SiC) fibers by carbothermal nitridation and at atmospheric pressure. SiC fibers were first treated in chlorine gas to form CDC (carbide-derived carbon) film on the fiber surface. The CDC-coated SiC fibers were then reacted with trimethylborate vapor and ammonia vapor at high temperature, forming BN coatings by carbothermal reduction. The FT-IR, XPS, XRD, SEM, TEM and AES were used to investigate the formation of the obtained coatings. It has been found that the obtained coatings are composed of phase mixture of h-BN and amorphous carbon, very uniform in thickness, have smooth surface and adhere well with the SiC fiber substrates. The BN-coated SiC fibers retain ∼80% strength of the as-received SiC fibers and show an obvious interfacial debonding and fiber pullout in the SiC{sub f}/SiOC composites. This method may be useful for the large scale production of high quality BN coating on silicon carbide fiber.

  9. Silicon carbide, v.1 growth, defects, and novel applications

    CERN Document Server

    Friedrichs, Peter; Ley, Lothar

    2011-01-01

    This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. Its physical properties make it more promising for high-powered devices than silicon. The volume is devoted to the material and covers methods of epitaxial and bulk growth. Identification and characterization of defects is discussed in detail. The contributions help the reader to develop a deeper understanding of defects by combining theoretical and experimental approaches. Apart from applications in power electronics, sensors, and NEMS, SiC has recently gained new interest as a

  10. Engineering near-infrared single-photon emitters with optically active spins in ultrapure silicon carbide

    Science.gov (United States)

    Fuchs, F.; Stender, B.; Trupke, M.; Simin, D.; Pflaum, J.; Dyakonov, V.; Astakhov, G. V.

    2015-07-01

    Vacancy-related centres in silicon carbide are attracting growing attention because of their appealing optical and spin properties. These atomic-scale defects can be created using electron or neutron irradiation; however, their precise engineering has not been demonstrated yet. Here, silicon vacancies are generated in a nuclear reactor and their density is controlled over eight orders of magnitude within an accuracy down to a single vacancy level. An isolated silicon vacancy serves as a near-infrared photostable single-photon emitter, operating even at room temperature. The vacancy spins can be manipulated using an optically detected magnetic resonance technique, and we determine the transition rates and absorption cross-section, describing the intensity-dependent photophysics of these emitters. The on-demand engineering of optically active spins in technologically friendly materials is a crucial step toward implementation of both maser amplifiers, requiring high-density spin ensembles, and qubits based on single spins.

  11. Preparation of silicon carbide nitride films on Si substrate by pulsed high-energy density plasma

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Thin films of silicon carbide nitride (SiCN) were prepared on (111) oriented silicon substrates by pulsed high-energy density plasma (PHEDP). The evolution of the chemical bonding states between silicon, nitrogen and carbon was investigated as a function of discharge voltage using X-ray photoelectron spectroscopy. With an increase in discharge voltage both the C1s and N 1s spectra shift to lower binding energy due to the formation of C-Si and N-Si bonds. The Si-C-N bonds were observed in the deconvolved C1s and N 1s spectra. The X-ray diffractometer (XRD) results show that there were no crystals in the films. The thickness of the films was approximately 1-2 μm with scanning electron microscopy (SEM).

  12. Structural changes induced by heavy ion irradiation in titanium silicon carbide

    Science.gov (United States)

    Nappé, J. C.; Monnet, I.; Grosseau, Ph.; Audubert, F.; Guilhot, B.; Beauvy, M.; Benabdesselam, M.; Thomé, L.

    2011-02-01

    Carbide-type ceramics, which have remarkable thermomechanical properties, are sensed to manufacture the fuel cladding of Generation IV reactors that should work at high temperature. The MAX phases, and more particularly titanium silicon carbide, are distinguished from other materials by their ability to have some plasticity, even at room temperature. For this study, polycrystalline Ti 3SiC 2 was irradiated with ions of different energies, which allow to discriminate the effect of both electronic and nuclear interactions. After characterization by low-incidence X-ray diffraction and cross-sectional transmission electron microscopy, it appears that Ti 3SiC 2 is not sensitive to electronic excitations while nuclear shocks damage its structure. The results show the creation of many defects and disorder in the structure, an expansion of the hexagonal close-packed lattice along the c axis, and an increase in the microstrain yield.

  13. Parallel Connection of Silicon Carbide MOSFETs for Multichip Power Modules

    DEFF Research Database (Denmark)

    Li, Helong

    characterization of SiC MOSFETs regarding the influence of switching loop stray inductance and common source stray inductance. The pulse current measurement methods of fast switching speed power devices are summarized and a new method witch silicon steel current transformer is presented. With the knowledge....... Then the DBC layout of a power module with paralleled SiC MOSFETs is presented and mathematically analyzed considering the influence of the circuit mismatch among the paralleled dies. It is revealed that there is a large common source stray inductance mismatch among the paralleled SiC MOSFETs, which leads...... the current sharing performance among the paralleled SiC MOSFET dies in the power module. The proposed DBC layout is not only limited for SiC MOSFETs, but also for Si IGBTs and other voltage controlled devices. of the circuit mismatch on the paralleled connection of SiC MOSFETs. It reveals the circuit...

  14. Development of SHS azide technology of silicon carbide nanopowder

    Science.gov (United States)

    Titova, Y. V.; Illarionov, A. Yu; Amosov, A. P.; Maidan, D. A.; Smetanin, K. S.

    2017-02-01

    The possibility of increasing the purity and yield of the SiC nanopowder using an intermediate synthesis of silicon nitride (Si3N4) by azide technology of self-propagating high-temperature synthesis based on the use of a powder of sodium azide (NaN3) as a nitriding reagent was investigated. As a result of combustion of the initial mixture of powders ‘19Si + 6NaN3 + (NH4)2SiF6 + 20’, a powdery product was obtained, consisting almost entirely of SiC (about 90%) with an admixture of Si3N4 and Si (about 5% each), and representing nanoparticles (80-150 nm) combined into agglomerates with the size up to 50 µm.

  15. Band structure of germanium carbides for direct bandgap silicon photonics

    Science.gov (United States)

    Stephenson, C. A.; O'Brien, W. A.; Penninger, M. W.; Schneider, W. F.; Gillett-Kunnath, M.; Zajicek, J.; Yu, K. M.; Kudrawiec, R.; Stillwell, R. A.; Wistey, M. A.

    2016-08-01

    Compact optical interconnects require efficient lasers and modulators compatible with silicon. Ab initio modeling of Ge1-xCx (x = 0.78%) using density functional theory with HSE06 hybrid functionals predicts a splitting of the conduction band at Γ and a strongly direct bandgap, consistent with band anticrossing. Photoreflectance of Ge0.998C0.002 shows a bandgap reduction supporting these results. Growth of Ge0.998C0.002 using tetrakis(germyl)methane as the C source shows no signs of C-C bonds, C clusters, or extended defects, suggesting highly substitutional incorporation of C. Optical gain and modulation are predicted to rival III-V materials due to a larger electron population in the direct valley, reduced intervalley scattering, suppressed Auger recombination, and increased overlap integral for a stronger fundamental optical transition.

  16. Decoding the message from meteoritic stardust silicon carbide grains

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Karen M. [Monash Centre for Astrophysics (MoCA), Monash University, Clayton VIC 3800, Australia and Earth-Life Science Institute (ELSI), Tokyo Institute of Technology, Ookayama, Meguro-ku, Tokyo, 152-8550 (Japan); Lugaro, Maria [Monash Centre for Astrophysics (MoCA), Monash University, Clayton VIC 3800 (Australia); Gibson, Brad K.; Pilkington, Kate [Monash Centre for Astrophysics (MoCA), Monash University, Clayton VIC 3800, Australia and Jeremiah Horrocks Institute, University of Central Lancashire (United Kingdom)

    2014-05-02

    SiC mainstream grains are presolar grains believed to form in the envelopes of carbon rich asymptotic giant branch (AGB) stars with masses between 1.5 and 3 solar masses. These grains represent a conundrum as the {sup 29}Si and {sup 30}Si abundances indicate that they formed in stars of super-solar metallicity, before the solar system formed. To shed light on this problem, we use silicon isotopic abundances to derive an age-metallicity relation for the stars believed to have produced the SiC mainstream grains. For 2732 mainstream SiC grains listed in the Presolar Grain Database, we use the {sup 29}Si abundances with the latest galactic chemical evolution (GCE) models to derive [Fe/H], and {sup 30}Si abundances along with the models of Zinner et al. (2006) to determine an approximate birth age for the parent AGB star. Comparing our age-metallicity relation with observational relationships derived for nearby stars, we find that the spread of [Fe/H] is in agreement, but the mean [Fe/H] in our relation is higher by 0.2 dex. We propose that this difference is because stars with higher [Fe/H] produce more dust and thus are over-represented in our age metallicity diagram, a finding consistent with previous published works. This result offers a solution for the long-standing problem of silicon in Stardust SiC grains, confirms the necessity of coupling chemistry and dynamics in simulations of the chemical evolution of our Galaxy, and constrains the modelling of dust condensation in stellar winds as a function of the metallicity.

  17. Transmission Electron Microscopy of Non-Etched Presolar Silicon Carbide

    Science.gov (United States)

    Stroud, Rhonda M.; Nittler, Larry R.; Alexander, Conel M. O'D.; Bernatowicz, Thomas J.; Messenger, Scott R.

    2003-01-01

    Our solar system formed from nuclei produced in earlier generations of stars. Mixing in the proto-solar nebula isotopically homogenized most of this material, but some grains, called presolar grains, retain their original isotopic composition. The isotopic properties of presolar SiC grains indicate that most of the grains formed in the outflows of carbon-rich Asymptotic Giant Branch (AGB) stars. The microstructure of these presolar grains reflects the conditions of the dust formation and subsequent alteration. Early microstructural studies of SiC grains obtained by acid dissolution from meteorites show that most isotopically anomalous SiC grains have the face-centered cubic b- SiC structure. However, Daulton et al. have shown that a small fraction of sub-micron presolar SiC grains are of the hexagonal 2H polytype (a-SiC). Although the harsh chemical treatments of these grains does not alter their crystal structure, significant alteration of the surface morphology of the grains due to the acid treatments has been observed. In addition, the acid treatments may preferentially remove cracked or fissured grains, and possible sub-grains, such as graphite. By studying SiC grains isolated by physical separation and found in situ, we attempt to obtain a more complete analysis of presolar SiC microstructures, including the surface morphology, in order to address the formation and processing history of the grains. In our prior work, we reported on one in situ SiC grain (hereafter CBIS1). Here we present results from two additional grains, one in situ, and one prepared as a physical separate.

  18. Small signal modeling of high electron mobility transistors on silicon and silicon carbide substrate with consideration of substrate loss mechanism

    Science.gov (United States)

    Sahoo, A. K.; Subramani, N. K.; Nallatamby, J. C.; Sylvain, L.; Loyez, C.; Quere, R.; Medjdoub, F.

    2016-01-01

    In this paper, we present a comparative study on small-signal modeling of AlN/GaN/AlGaN double hetero-structure high electron mobility transistors (HEMTs) grown on silicon (Si) and silicon carbide (SiC) substrate. The traditional small signal equivalent circuit model is modified to take into account the transmission loss mechanism of coplanar waveguide (CPW) line which cannot be neglected at high frequencies. CPWs and HEMTs-on-AlN/GaN/AlGaN epitaxial layers are fabricated on both the Si and SiC substrates. S-parameter measurements at room temperature are performed over the frequency range from 0.5 GHz to 40 GHz. Transmission loss of CPW lines are modeled with a distributed transmission line (TL) network and an equivalent circuit model is included in the small-signal transistor model topology. Measurements and simulations are compared and found to be in good agreement.

  19. Modeling of defect formation in silicon carbide during PVT growth

    Science.gov (United States)

    Drachev, Roman Victorovich

    2002-01-01

    The improvement of PVT grown SiC structural quality is crucial for the wide commercialization of SiC devices that feature superior characteristics for power conditioning and control. This is why, this dissertation is devoted to investigation and development of comprehensive models that can help to explain, understand and, then, suppress (eliminate) formation of various defects in SiC during PVT growth. The dissertation consists of six chapters. The first chapter is introductory. The second chapter considers in detail the general principles and physical bases of the SiC PVT growth technique along with the temperature dependence of pressure, composition and stoichiometry of the SiC gaseous phase. Questions related to the diffusive mass transport in the SiC growth cell are also discussed. The growth velocity as a function of the mass transport rate, the heat balance at the surface of crystallization and the growth front-crystal backside temperature difference is analyzed. Also the graphitization processes and instability of the sublimation temperature in the source material region are addressed. Chapter number three concerns generation of silicon and carbon second phase precipitates at the front of SiC crystallization. The comprehensive models concerning these phenomena are developed. The fourth chapter considers defect formation in SiC caused by the presence of carbon and/or silicon second phase particles at the growth front. Generation mechanisms of such structural defects as heterogeneous inclusions, point and planar defects, and filamentary voids are discussed in detail. Chapter number five deals with the defects caused by thermal stresses in the growing boule of SiC. Analytical estimations of the axially symmetric temperature field distribution and shear stress radial distribution in plane strain approximation are employed in order to estimate the extent to which such phenomena cause the generation of dislocations and micropipe formation in the growing ingot. The

  20. Fabrication and characterization of silicon based thermal neutron detector with hot wire chemical vapor deposited boron carbide converter

    Science.gov (United States)

    Chaudhari, Pradip; Singh, Arvind; Topkar, Anita; Dusane, Rajiv

    2015-04-01

    In order to utilize the well established silicon detector technology for neutron detection application, a silicon based thermal neutron detector was fabricated by integrating a thin boron carbide layer as a neutron converter with a silicon PIN detector. Hot wire chemical vapor deposition (HWCVD), which is a low cost, low temperature process for deposition of thin films with precise thickness was explored as a technique for direct deposition of a boron carbide layer over the metalized front surface of the detector chip. The presence of B-C bonding and 10B isotope in the boron carbide film were confirmed by Fourier transform infrared spectroscopy and secondary ion mass spectrometry respectively. The deposition of HWCVD boron carbide layer being a low temperature process was observed not to cause degradation of the PIN detector. The response of the detector with 0.2 μm and 0.5 μm thick boron carbide layer was examined in a nuclear reactor. The pulse height spectrum shows evidence of thermal neutron response with signature of (n, α) reaction. The results presented in this article indicate that HWCVD boron carbide deposition technique would be suitable for low cost industrial fabrication of PIN based single element or 1D/2D position sensitive thermal neutron detectors.

  1. Fabrication and characterization of silicon based thermal neutron detector with hot wire chemical vapor deposited boron carbide converter

    Energy Technology Data Exchange (ETDEWEB)

    Chaudhari, Pradip, E-mail: pradipcha@gmail.com [Semiconductor Thin Films and Plasma Processing Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Powai, Mumbai – 400076 (India); Singh, Arvind, E-mail: arvindsingh1884@gmail.com [Electronics Division, Bhabha Atomic Research Centre, Trombay, Mumbai – 400085 (India); Topkar, Anita, E-mail: anita.topkar@gmail.com [Electronics Division, Bhabha Atomic Research Centre, Trombay, Mumbai – 400085 (India); Dusane, Rajiv, E-mail: rodusane@iitb.ac.in [Semiconductor Thin Films and Plasma Processing Laboratory, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Powai, Mumbai – 400076 (India)

    2015-04-11

    In order to utilize the well established silicon detector technology for neutron detection application, a silicon based thermal neutron detector was fabricated by integrating a thin boron carbide layer as a neutron converter with a silicon PIN detector. Hot wire chemical vapor deposition (HWCVD), which is a low cost, low temperature process for deposition of thin films with precise thickness was explored as a technique for direct deposition of a boron carbide layer over the metalized front surface of the detector chip. The presence of B-C bonding and {sup 10}B isotope in the boron carbide film were confirmed by Fourier transform infrared spectroscopy and secondary ion mass spectrometry respectively. The deposition of HWCVD boron carbide layer being a low temperature process was observed not to cause degradation of the PIN detector. The response of the detector with 0.2 µm and 0.5 µm thick boron carbide layer was examined in a nuclear reactor. The pulse height spectrum shows evidence of thermal neutron response with signature of (n, α) reaction. The results presented in this article indicate that HWCVD boron carbide deposition technique would be suitable for low cost industrial fabrication of PIN based single element or 1D/2D position sensitive thermal neutron detectors.

  2. Development of an Extreme High Temperature n-type Ohmic Contact to Silicon Carbide

    Science.gov (United States)

    Evans, Laura J.; Okojie, Robert S.; Lukco, Dorothy

    2011-01-01

    We report on the initial demonstration of a tungsten-nickel (75:25 at. %) ohmic contact to silicon carbide (SiC) that performed for up to fifteen hours of heat treatment in argon at 1000 C. The transfer length method (TLM) test structure was used to evaluate the contacts. Samples showed consistent ohmic behavior with specific contact resistance values averaging 5 x 10-4 -cm2. The development of this contact metallization should allow silicon carbide devices to operate more reliably at the present maximum operating temperature of 600 C while potentially extending operations to 1000 C. Introduction Silicon Carbide (SiC) is widely recognized as one of the materials of choice for high temperature, harsh environment sensors and electronics due to its ability to survive and continue normal operation in such environments [1]. Sensors and electronics in SiC have been developed that are capable of operating at temperatures of 600 oC. However operating these devices at the upper reliability temperature threshold increases the potential for early degradation. Therefore, it is important to raise the reliability temperature ceiling higher, which would assure increased device reliability when operated at nominal temperature. There are also instances that require devices to operate and survive for prolonged periods of time above 600 oC [2, 3]. This is specifically needed in the area of hypersonic flight where robust sensors are needed to monitor vehicle performance at temperature greater than 1000 C, as well as for use in the thermomechanical characterization of high temperature materials (e.g. ceramic matrix composites). While SiC alone can withstand these temperatures, a major challenge is to develop reliable electrical contacts to the device itself in order to facilitate signal extraction

  3. A novel strategy for retrospective exposure assessment in the Norwegian silicon carbide industry.

    Science.gov (United States)

    Føreland, Solveig; Bugge, Merete Drevvatne; Bakke, Berit; Bye, Erik; Eduard, Wijnand

    2012-01-01

    The objective was to construct a retrospective job-exposure matrix (JEM) for the Norwegian silicon carbide industry. More than 3300 historical total dust measurements were available (1967-2005); however, there were few measurements of other agents. Total dust measurements were therefore used as the basis for the JEM, and a novel method was developed to estimate exposure to other agents. Multiple linear regression models were developed to describe historical exposure to total dust. Exposure estimates were extrapolated backward to periods without exposure data by adjustments for process and work-hour related changes. An exposure assessment study was performed where total dust was sampled in parallel with fibers or respirable dust. The respirable dust was analyzed for the content of quartz, cristobalite, and silicon carbide. Mixed-effect models were developed to estimate the exposure to these agents from total dust exposure, plant, and job group. Exposure to asbestos and polycyclic aromatic hydrocarbons was assigned qualitatively. Multiple linear regression models of total dust described historical exposure best in the furnace department (R(2) (adj) = 0.49-0.74). Models in the other departments explained less variance (R(2) (adj) = 0.12-0.32). Exposure determinants and total dust explained a substantial proportion of the between- (70-100%) and within-worker (8.0-54%) variance in the mixed-effect models. The relative bias between available historical measurements and the estimated exposure to dust components varied between -39% (fiber) and 40% (quartz). However, corrections were not considered necessary due to limitations in the historical data. The component-specific metrices were sufficiently different from each other (r(Pearson) silicon carbide and respirable dust from total dust exposure.].

  4. Carbothermal synthesis of coatings on silicon carbide fibers

    Science.gov (United States)

    Chen, Linlin

    Four kinds of protective coatings---carbide derived carbon (CDC), boron nitride (BN), Al-O-N and BN doped Al-O-N (BAN) have been successfully synthesized on the surface of SiC fibers on the target to enhance the mechanical properties and oxidation resistance of the coated SiC fibers for the application as the reinforcements in the Ceramic Matrix Composites (CMCs) in the high temperatures. First of all, CDC coatings have been uniformly produced on Tyranno ZMI SiC fibers with good thickness control within nanometer accuracy by the chlorination in the temperature range of 550--700°C at atmospheric pressure. Kinetics of the carbon coating growth on the fibers has been systematically studied and thus a good foundation was set up for the further coating synthesis. BN coatings have been synthesized on the surface of SiC powders, fibers and fabrics by a novel carbothermal nitridation method. Non-bridging has been achieved in the BN-coated fiber tows by the nitridation in ammonia at atmospheric pressure in a temperature below 1200°C, which is lower compared to the traditional BN synthesis method and does not cause the degradation of the coated-fibers. BN coatings on the carbon nanotubes have also been formed and unlike the common methods, no additional dopant (such as metal catalyst) is introduced into the system during the BN coatings syntheses, thus the contamination of the final product is avoided. A novel Al-O-N coating has been explored with the most impressive point is that a more than 65% improvement in the tensile strength (up to ˜5.1GPa) and a three-time increase in the Weibull modulus compared to the as-received fibers are resulted by the formation of 200nm Al-O-N coating on the SiC fibers. It exceeds the strength of all other small diameter SiC fibers reported in the literature. Furthermore, BAN coating has also been produced on the surface of SiC fibers and about 20% enhancement in mechanical strength is achieved compared to that of the original fibers

  5. Silicon carbide composite for light water reactor fuel assembly applications

    Science.gov (United States)

    Yueh, Ken; Terrani, Kurt A.

    2014-05-01

    The feasibility of using SiCf-SiCm composites in light water reactor (LWR) fuel designs was evaluated. The evaluation was motivated by the desire to improve fuel performance under normal and accident conditions. The Fukushima accident once again highlighted the need for improved fuel materials that can maintain fuel integrity to higher temperatures for longer periods of time. The review identified many benefits as well as issues in using the material. Issues perceived as presenting the biggest challenges to the concept were identified to be flux gradient induced differential volumetric swelling, fragmentation and thermal shock resistance. The oxidation of silicon and its release into the coolant as silica has been identified as an issue because existing plant systems have limited ability for its removal. Detailed evaluation using available literature data and testing as part of this evaluation effort have eliminated most of the major concerns. The evaluation identified Boiling Water Reactor (BWR) channel, BWR fuel water tube, and Pressurized Water Reactor (PWR) guide tube as feasible applications for SiC composite. A program has been initiated to resolve some of the remaining issues and to generate physical property data to support the design of commercial fuel components.

  6. Silicon carbide composite for light water reactor fuel assembly applications

    Energy Technology Data Exchange (ETDEWEB)

    Yueh, Ken, E-mail: kyueh@epri.com [Fuel Reliability Program, EPRI, 1300 West WT Harris Blvd, Charlotte, NC 28262 (United States); Terrani, Kurt A., E-mail: terranika@ornl.gov [Fusion and Materials for Nuclear Systems Division, Oak Ridge National Laboratory, 1 Bethel Valley Rd. MS 6093, Oak Ridge, TN 37831 (United States)

    2014-05-01

    The feasibility of using SiC{sub f}–SiC{sub m} composites in light water reactor (LWR) fuel designs was evaluated. The evaluation was motivated by the desire to improve fuel performance under normal and accident conditions. The Fukushima accident once again highlighted the need for improved fuel materials that can maintain fuel integrity to higher temperatures for longer periods of time. The review identified many benefits as well as issues in using the material. Issues perceived as presenting the biggest challenges to the concept were identified to be flux gradient induced differential volumetric swelling, fragmentation and thermal shock resistance. The oxidation of silicon and its release into the coolant as silica has been identified as an issue because existing plant systems have limited ability for its removal. Detailed evaluation using available literature data and testing as part of this evaluation effort have eliminated most of the major concerns. The evaluation identified Boiling Water Reactor (BWR) channel, BWR fuel water tube, and Pressurized Water Reactor (PWR) guide tube as feasible applications for SiC composite. A program has been initiated to resolve some of the remaining issues and to generate physical property data to support the design of commercial fuel components.

  7. The Effect of Excess Carbon on the Crystallographic, Microstructural, and Mechanical Properties of CVD Silicon Carbide Fibers

    Energy Technology Data Exchange (ETDEWEB)

    Marzik, J V; Croft, W J; Staples, R J; MoberlyChan, W J

    2006-12-05

    Silicon carbide (SiC) fibers made by chemical vapor deposition (CVD) are of interest for organic, ceramic, and metal matrix composite materials due their high strength, high elastic modulus, and retention of mechanical properties at elevated processing and operating temperatures. The properties of SCS-6{trademark} silicon carbide fibers, which are made by a commercial process and consist largely of stoichiometric SiC, were compared with an experimental carbon-rich CVD SiC fiber, to which excess carbon was added during the CVD process. The concentration, homogeneity, and distribution of carbon were measured using energy dispersive x-ray spectroscopy (SEM/EDS). The effect of excess carbon on the tensile strength, elastic modulus, and the crystallographic and microstructural properties of CVD silicon carbide fibers was investigated using tensile testing, x-ray diffraction, scanning electron microscopy (SEM), and transmission electron microscopy (TEM).

  8. The effect of fiber microstructure on evolution of residual stresses in silicon carbide/titanium aluminide composites

    Science.gov (United States)

    Pindera, Marek-Jerzy; Freed, Alan D.

    1992-01-01

    This paper examines the effect of the morphology of the SCS6 silicon carbide fiber on the evolution of residual stresses in SiC/Ti composites. A micromechanics model based on the concentric cylinder concept is presented which is used to calculate residual stresses in a SiC/Ti composite during axisymmetric cooling by a spatially uniform temperature change. The silicon carbide fiber is modeled as a layered material with five distinct transversely isotropic and orthotropic, elastic layers, whereas the titanium matrix is taken to be isotropic, with temperature-dependent elastoplastic properties. The results arc compared with those obtained based on the assumption that the silicon carbide fiber is isotropic and homogeneous.

  9. Silicon carbide thin films as nuclear ceramics grown by laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Filipescu, M., E-mail: morarm@nipne.ro [National Institute for Laser, Plasma and Radiation Physics, P.O. Box MG 16, RO 77125, Magurele - Bucharest (Romania); Velisa, G. [Horia Hulubei National Institute of Physics and Nuclear Engineering, P.O.BOX MG-6, Bucharest - Magurele (Romania); Ion, V.; Andrei, A. [National Institute for Laser, Plasma and Radiation Physics, P.O. Box MG 16, RO 77125, Magurele - Bucharest (Romania); Scintee, N.; Ionescu, P. [Horia Hulubei National Institute of Physics and Nuclear Engineering, P.O.BOX MG-6, Bucharest - Magurele (Romania); Stanciu, S.G. [Center for Microscopy- Microanalysis and Information Processing, University ' POLITEHNICA' of Bucharest, Bucharest (Romania); Pantelica, D. [Horia Hulubei National Institute of Physics and Nuclear Engineering, P.O.BOX MG-6, Bucharest - Magurele (Romania); Dinescu, M. [National Institute for Laser, Plasma and Radiation Physics, P.O. Box MG 16, RO 77125, Magurele - Bucharest (Romania)

    2011-09-01

    Silicon carbide has been identified as a potential inert matrix candidate for advanced fuel. In this work, the growth of SiC thin films by pulsed laser deposition is reported. The stoicheometry and thickness of deposited films was investigated by non-Rutherford backscattering spectrometry. The influence of the deposition parameters, i.e. substrate temperature and laser fluence on the structure, morphology and optical properties of the deposited thin layers was studied. It was found that polycrystalline SiC thin films with uniform surface morphology were obtained at 873 K.

  10. Silicon carbide whisker composites. (Latest citations from Engineered Materials abstracts). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The bibliography contains citations concerning the manufacture and applications of silicon carbide whisker reinforced composites. Citations discuss the preparation of whiskers and the processing of composites containing the whiskers. Applications include aerospace engines, automotive components, engine components, and surgical implants. Physical properties such as bending strength, crack propagation, creep, fracture toughness, and stress strain curves are covered. Ceramic matrix, metal matrix, and carbon-carbon composites are examined. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  11. High-frequency and high-quality silicon carbide optomechanical microresonators

    OpenAIRE

    Xiyuan Lu; Lee, Jonathan Y.; Qiang Lin

    2015-01-01

    Silicon carbide (SiC) exhibits excellent material properties attractive for broad applications. We demonstrate the first SiC optomechanical microresonators that integrate high mechanical frequency, high mechanical quality, and high optical quality into a single device. The radial-breathing mechanical mode has a mechanical frequency up to 1.69 GHz with a mechanical Q around 5500 in atmosphere, which corresponds to a mechanical f-Q product as high as 9.47x10^12 Hz. The strong optomechanical cou...

  12. Contact angle measurement of molten lead–lithium on silicon carbide surfaces

    OpenAIRE

    Ueki, Yoshitaka; Nagai, Keiichi; Kunugi, Tomoaki; Hirabayashi, Masaru; Ara, Kuniaki; Yonemoto, Yukihiro; Hinoki, Tatsuya

    2011-01-01

    Measurements of the contact angles at the different temperatures of a molten lead–lithium eutectic alloy (PbLi) droplet on a silicon carbide (SiC) wall are needed for the research and development both of a magnetic confinement fusion (MCF) and an inertia confinement fusion (ICF) blankets. PbLi coolant/breeder flows in the coolant channel, which is made of the SiC walls, and will experience a flow slip at the wall, called as a magnetohydrodynamic (MHD) slip flow. The ICF blanket adopts a molte...

  13. Fluorescent Silicon Carbide and its Applications in White Light-Emitting Diodes

    DEFF Research Database (Denmark)

    Ou, Yiyu

    light extraction efficiency are presented. White LEDs are the most promising techniques to replace the conventional lighting sources. A typical white LED consists of a Gallium Nitride (GaN) blue or Ultraviolet (UV) LED stack and a wavelengthconversion material. Silicon Carbide (SiC) has a wide optical...... bandgap and could be tailored to emit light at different wavelength by introducing different dopants. Combined emitting spectra of two types of DAP co-doped f-SiC could cover the whole visible spectral range and make f-SiC as a good candidate of wavelength-conversion material. It has a better color...

  14. Joining silicon carbide to austenitic stainless steel through diffusion welding; Stellingen behorende bij het proefschrift

    Energy Technology Data Exchange (ETDEWEB)

    Krugers, Jan-Paul

    1993-01-19

    In this thesis, the results are presented of a study dealing with joining silicon carbide to austenitic stainless steel AIS316 by means of diffusion welding. Welding experiments were carried out without and with the use of a metallic intermediate, like copper, nickel and copper-nickel alloys at various conditions of process temperature, process time, mechanical pressure and interlayer thickness. Most experiments were carried out in high vacuum. For reasons of comparison, however, some experiments were also carried out in a gas shielded environment of 95 vol.% Ar and 5 vol.% H2.

  15. Modeling of external electric field effect on the carbon and silicon carbide nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Sorokina, Veronika, E-mail: ansonika@mail.ru [Saint Petersburg State University, 7/9 Universitetskaya nab., St. Petersburg, 199034 (Russian Federation); Nikiforov, Konstantin, E-mail: knikiforov@cc.spbu.ru [Saint Petersburg Electrotechnical University “LETI”, 5 Prof. Popova, St. Petersburg, 197376 (Russian Federation)

    2016-06-17

    Studying emission characteristics of nanotubes is extremely important for development of electronics. Compared to other electron sources nanotube-based field emitters allow obtaining significant emission currents at relatively low values of the applied field. It is possible due to their unique structure. This article is devoted to theoretical investigation how external electric field effects several samples of open single-wall nanotubes from carbon and silicon carbide. Total energies, dipole moments and band gaps for five types of nanotubes were calculated from the first principles. The numerical experiment results indicate the adequacy of modeling. It was concluded that considered configurations of achiral carbon nanotubes should be semiconductors.

  16. Extinct technetium in silicon carbide stardust grains: implications for stellar nucleosynthesis.

    Science.gov (United States)

    Savina, Michael R; Davis, Andrew M; Tripa, C Emil; Pellin, Michael J; Gallino, Roberto; Lewis, Roy S; Amari, Sachiko

    2004-01-30

    The isotopic composition of ruthenium (Ru) in individual presolar silicon carbide (SiC) stardust grains bears the signature of s-process nucleosynthesis in asymptotic giant branch stars, plus an anomaly in 99Ru that is explained by the in situ decay of technetium isotope 99Tc in the grains. This finding, coupled with the observation of Tc spectral lines in certain stars, shows that the majority of presolar SiC grains come from low-mass asymptotic giant branch stars, and that the amount of 99Tc produced in such stars is insufficient to have left a detectable 99Ru anomaly in early solar system materials.

  17. Surface phonon-polariton enhanced optical forces in silicon carbide nanostructures.

    Science.gov (United States)

    Li, Dongfang; Lawandy, Nabil M; Zia, Rashid

    2013-09-09

    The enhanced optical forces induced by surface phonon-polariton (SPhP) modes are investigated in different silicon carbide (SiC) nanostructures. Specifically, we calculate optical forces using the Maxwell stress tensor for three different geometries: spherical particles, slab waveguides, and rectangular waveguides. We show that SPhP modes in SiC can produce very large forces, more than one order of magnitude larger than the surface plasmon-polariton (SPP) forces in analogous metal nanostructures. The material and geometric basis for these large optical forces are examined in terms of dispersive permittivity, separation distance, and operating wavelength.

  18. Synthesis of silicon carbide fiber from blended precursor of organosilicon polymers

    Energy Technology Data Exchange (ETDEWEB)

    Narisawa, Masaki; Kitano, Shuhei; Okamura, Kiyohito [Osaka Prefecture Univ., Sakai (Japan); Itoh, Masayoshi [Mitsui Toatsu Chemicals, Inc., Yokohama (Japan). Central Research Lab.

    1995-12-01

    Polycarbosilane (PCS) containing 10% of polyvinylsilane (PVS) was prepared and shaped into fiber form by the melt-spinning method. The influence of the PVS addition on curing and pyrolysis processes for the precursor fiber was investigated. The addition of PVS to PCS can lower the curing temperature and increase the residual weight of the fiber during pyrolysis. The silicon carbide fiber synthesized from the blended precursor maintains higher strength than the fiber from pure PCS beyond 1,673 K. The core of the SiC fiber from blended precursor maintains a homogeneous appearance even after surface degradation.

  19. Magneto-optical Trapping through a Transparent Silicon Carbide Atom Chip

    CERN Document Server

    Huet, Landry; Morvan, Erwan; Sarazin, Nicolas; Pocholle, Jean-Paul; Reichel, Jakob; Guerlin, Christine; Schwartz, Sylvain

    2011-01-01

    We demonstrate the possibility of trapping about one hundred million rubidium atoms in a magneto-optical trap with several of the beams passing through a transparent atom chip mounted on a vacuum cell wall. The chip is made of a gold microcircuit deposited on a silicon carbide substrate, with favorable thermal conductivity. We show how a retro-reflected configuration can efficiently address the chip birefringence issues, allowing atom trapping at arbitrary distances from the chip. We also demonstrate detection through the chip, granting a large numerical aperture. This configuration is compared to other atom chip devices, and some possible applications are discussed.

  20. Dual ohmic contact to N- and P-type silicon carbide

    Science.gov (United States)

    Okojie, Robert S. (Inventor)

    2013-01-01

    Simultaneous formation of electrical ohmic contacts to silicon carbide (SiC) semiconductor having donor and acceptor impurities (n- and p-type doping, respectively) is disclosed. The innovation provides for ohmic contacts formed on SiC layers having n- and p-doping at one process step during the fabrication of the semiconductor device. Further, the innovation provides a non-discriminatory, universal ohmic contact to both n- and p-type SiC, enhancing reliability of the specific contact resistivity when operated at temperatures in excess of 600.degree. C.

  1. Fabrication and catalytic tests of MCM-22/silicon carbide structured catalysts.

    Science.gov (United States)

    Gu, Lijun; Ma, Ding; Hu, Gang; Wu, Jingjing; Wang, Hongxia; Sun, Changyong; Yao, Songdong; Shen, Wenjie; Bao, Xinhe

    2010-10-28

    The structured catalyst of zeolite MCM-22/silicon carbide (SiC) was prepared for the first time through the in situ hydrothermal synthesis approach. The zeolite loading of the structured catalyst could be tuned by changing the synthesis time and applying alkali pre-treatment of SiC substrate. An additional silica layer formed on SiC substrate after the precalcination treatment facilitated the crystallization of MCM-22 zeolite on the SiC substrate. The MCM-22/SiC structured catalyst thus prepared exhibited good catalytic performance in the methane dehydroaromatization reaction.

  2. Growth and tribological properties of diamond films on silicon and tungsten carbide substrates

    Science.gov (United States)

    Radhika, R.; Ramachandra Rao, M. S.

    2016-11-01

    Hot filament chemical vapor deposition technique was used to deposit microcrystalline diamond (MCD) and nanocrystalline diamond (NCD) films on silicon (Si) and tungsten carbide (WC-6Co) substrates. Friction coefficient of larger diamond grains deposited on WC-6Co substrate shows less value approximately 0.2 while this differs marginally on films grown on Si substrate. The study claims that for a less friction coefficient, the grain size is not necessarily smaller. However, the less friction coefficient (less than 0.1 saturated value) in MCD and NCD deposited on Si is explained by the formation of graphitized tribolayer. This layer easily forms when diamond phase is thermodynamically unstable.

  3. Electronic transport properties of an (8,0) carbon/silicon-carbide nanotube heterojunction

    Institute of Scientific and Technical Information of China (English)

    Liu Hongxia; Zhang Heming; Zhang Zhiyong

    2009-01-01

    A two-probe system of the heterojunction formed by an (8,0) carbon nanotube(CNT) and an (8,0)silicon carbide nanotube (SiCNT) was established based on its optimized structure. By using a method combining nonequilibrium Green's function (NEGF) with density functional theory (DFT), the transport properties of the heterojunction were investigated. Our study reveals that the highest occupied molecular orbital (HOMO) has a higher electron density on the CNT section and the lowest unoccupied molecular orbital (LUMO) mainly concentrates on the interface and the SiCNT section. The positive and negative threshold voltages are1.8 and-2.2 V, respectively.

  4. High temperature Hexoloy{trademark} SX silicon carbide. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan, G.V.; Lau, S.K.; Storm, R.S. [Carborundum Co., Niagara Falls, NY (United States)

    1994-09-01

    HEXOLOY{reg_sign} SX-SiC, fabricated with Y and Al containing compounds as sintering aids, has been shown to possess significantly improved strength and toughness over HEXOLOY{reg_sign}SA-SiC. This study was undertaken to establish and benchmark the complete mechanical property database of a first generation material, followed by a process optimization task to further improve the properties. Mechanical characterization on the first generation material indicated that silicon-rich pools, presumably formed as a reaction product during sintering, controlled the strength from room temperature to 1,232 C. At 1,370 C in air, the material was failing due to a glass-phase formation at the surface. This glass-phase formation was attributed to the reaction of yttrium aluminates, which exist as a second phase in the material, with the ambient. This process was determined to be a time-dependent one that leads to slow crack growth. Fatigue experiments clearly indicated that the slow crack growth driven by the reaction occurred only at temperatures >1,300 C, above the melting point of the glass phase. Process optimization tasks conducted included the selection of the best SiC powder source, studies on mixing/milling conditions for SiC powder with the sintering aids, and a designed experiment involving a range of sintering and post-treatment conditions. The optimization study conducted on the densification variables indicated that lower sintering temperatures and higher post-treatment pressures reduce the Si-rich pool formation, thereby improving the room-temperature strength. In addition, it was also determined that furnacing configuration and atmosphere were critical in controlling the Si-rich formation.

  5. Silicon carbide hollow fiber membranes: obtainment and characterization; Membranas de fibra oca de carbeto de silicio: obtencao e caracterizacao

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, S.S.L.; Ferreira, R.S.B.; Araujo, B.A.; Medeiros, K.M.; Lucena, H.L.; Araujo, E.M., E-mail: sandriely_sonaly@hotmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Departamento de Engenharia de Materiais

    2016-07-01

    Silicon carbide is a promising material for the production of membranes due to its high melting temperature, thermal shock resistance, excellent mechanical and chemical stability. So, this study aims to characterize silicon carbide membranes in order to apply them in the separation of oil-water. A solution (SiC + PES + 1-Methyl- 2-Pyrrolidone) and through the extrusion technique by immersion precipitation membranes were obtained with hollow fiber geometry was prepared. And then sintered at 1500 ° C. For the characterization analyzes were made XRD, FTIR and SEM to evaluate the morphology and composition of the membranes obtained before and after sintering. (author)

  6. Comparison Between Cemented Carbide and PCD Tools on Machinability of a High Silicon Aluminum Alloy

    Science.gov (United States)

    Soares, R. B.; de Jesus, A. M. P.; Neto, R. J. L.; Chirita, B.; Rosa, P. A. R.; Reis, A.

    2017-08-01

    The high content of silicon of aluminum casting alloys challenges the tool life of conventional cemented carbide inserts, and polycrystalline diamond (PCD) tools appear as an interesting material to machine these alloys because they improve substantially the durability of cutting tools and consequently the productivity of machining. However, the surface roughness, cutting forces and chip morphology are equally important factors in machining evaluation. Therefore, an experimental study is performed aiming at comparing the performance of cemented carbide and PCD tools taking into account cutting forces, surface roughness and chip morphology, under dry longitudinal turning, performed for the AlSi9Cu3 alloy produced by permanent mold casting process. Different chip breaker geometries were also considered, and their influence on the referred parameters was also investigated. Analysis of variance was employed to study the different contributions of inserts, cutting speed, feed rate, depth of cut and their interactions in machinability performance. The results show low cutting forces and better results for surface roughness for uncoated cemented carbide tools, with simpler chip breakers and flat rake face PCD tool, but an efficient chip control was obtained for inserts with small grooves with high cutting forces and power consumption. Nevertheless, the feed rate and depth of cut have the highest influence on the machinability performance of the alloy under investigation.

  7. Synthesis and Analysis of Alpha Silicon Carbide Components for Encapsulation of Fuel Rods and Pellets

    Energy Technology Data Exchange (ETDEWEB)

    Kevin M. McHugh; John E. Garnier; George W. Griffith

    2011-09-01

    The chemical, mechanical and thermal properties of silicon carbide (SiC) along with its low neutron activation and stability in a radiation field make it an attractive material for encapsulating fuel rods and fuel pellets. The alpha phase (6H) is particularly stable. Unfortunately, it requires very high temperature processing and is not readily available in fibers or near-net shapes. This paper describes an investigation to fabricate a-SiC as thin films, fibers and near-net-shape products by direct conversion of carbon using silicon monoxide vapor at temperatures less than 1700 C. In addition, experiments to nucleate the alpha phase during pyrolysis of polysilazane, are also described. Structure and composition were characterized using scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. Preliminary tensile property analysis of fibers was also performed.

  8. Performance optimization of high-order Lamb wave sensors based on silicon carbide substrates.

    Science.gov (United States)

    Chen, Zhe; Fan, Li; Zhang, Shu-yi; Zhang, Hui

    2016-02-01

    Silicon carbide (SiC), as a new type of material for substrates in micro-electromechanical system (MEMS), was given high consideration in virtue of the properties of high acoustic velocity, low loss, chemical resistance, and etc. In this work, five performance parameters, which are electromechanical coupling coefficients, mass sensitivities, conductivity sensitivities, insert losses and minimum detectable masses, are theoretically investigated in Lamb wave chemical sensors for gas sensing based on SiC substrates. It is presented that higher performance can be achieved based on high-order modes other than fundamental modes, and the abovementioned five parameters can be simultaneously optimized. Then, according to the optimized operating conditions, operating parameters of the SiC-based high-order Lamb wave sensors are designed, which can be easily realized in MEMS technology. Finally, it is demonstrates that the SiC-based sensor exhibits better performance than that of the sensor with a conventional silicon substrate.

  9. Transport properties of boron-doped single-walled silicon carbide nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Y.T. [Key laboratory of Ministry of Education for Wide Band Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China); Ding, R.X., E-mail: rx_ding@163.co [Key laboratory of Ministry of Education for Wide Band Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China); Song, J.X. [Key laboratory of Ministry of Education for Wide Band Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China); School of Electronic Engineering, Xi' an Shiyou University, Xi' an 710075 (China)

    2011-01-15

    The doped boron (B) atom in silicon carbide nanotube (SiCNT) can substitute carbon or silicon atom, forming two different structures. The transport properties of both B-doped SiCNT structures are investigated by the method combined non-equilibrium Green's function with density functional theory (DFT). As the bias ranging from 0.8 to 1.0 V, the negative differential resistance (NDR) effect occurs, which is derived from the great difficulty for electrons tunneling from one electrode to another with the increasing of localization of molecular orbital. The high similar transport properties of both B-doped SiCNT indicate that boron is a suitable impurity for fabricating nano-scale SiCNT electronic devices.

  10. High-yield synthesis of silicon carbide nanowires by solar and lamp ablation

    Science.gov (United States)

    Lu, Hai-bo; Chan, Benjamin C. Y.; Wang, Xiaolin; Tong Chua, Hui; Raston, Colin L.; Albu-Yaron, Ana; Levy, Moshe; Popowitz-Biro, Ronit; Tenne, Reshef; Feuermann, Daniel; Gordon, Jeffrey M.

    2013-08-01

    We report a reasonably high yield (∼50%) synthesis of silicon carbide (SiC) nanowires from silicon oxides and carbon in vacuum, by novel solar and lamp photothermal ablation methods that obviate the need for catalysis, and allow relatively short reaction times (∼10 min) in a nominally one-step process that does not involve toxic reagents. The one-dimensional core/shell β-SiC/SiOx nanostructures—characterized by SEM, TEM, HRTEM, SAED, XRD and EDS—are typically several microns long, with core and outer diameters of about 10 and 30 nm, respectively. HRTEM revealed additional distinctive nanoscale structures that also shed light on the formation pathways.

  11. Large area and structured epitaxial graphene produced by confinement controlled sublimation of silicon carbide.

    Science.gov (United States)

    de Heer, Walt A; Berger, Claire; Ruan, Ming; Sprinkle, Mike; Li, Xuebin; Hu, Yike; Zhang, Baiqian; Hankinson, John; Conrad, Edward

    2011-10-11

    After the pioneering investigations into graphene-based electronics at Georgia Tech, great strides have been made developing epitaxial graphene on silicon carbide (EG) as a new electronic material. EG has not only demonstrated its potential for large scale applications, it also has become an important material for fundamental two-dimensional electron gas physics. It was long known that graphene mono and multilayers grow on SiC crystals at high temperatures in ultrahigh vacuum. At these temperatures, silicon sublimes from the surface and the carbon rich surface layer transforms to graphene. However the quality of the graphene produced in ultrahigh vacuum is poor due to the high sublimation rates at relatively low temperatures. The Georgia Tech team developed growth methods involving encapsulating the SiC crystals in graphite enclosures, thereby sequestering the evaporated silicon and bringing growth process closer to equilibrium. In this confinement controlled sublimation (CCS) process, very high-quality graphene is grown on both polar faces of the SiC crystals. Since 2003, over 50 publications used CCS grown graphene, where it is known as the "furnace grown" graphene. Graphene multilayers grown on the carbon-terminated face of SiC, using the CCS method, were shown to consist of decoupled high mobility graphene layers. The CCS method is now applied on structured silicon carbide surfaces to produce high mobility nano-patterned graphene structures thereby demonstrating that EG is a viable contender for next-generation electronics. Here we present for the first time the CCS method that outperforms other epitaxial graphene production methods.

  12. Study of silicon carbide formation by liquid silicon infiltration of porous carbon structures

    Science.gov (United States)

    Margiotta, Jesse C.

    Silicon carbide (SiC) materials are prime candidates for high temperature heat exchangers for next generation nuclear reactors due to their refractory nature and high thermal conductivity at elevated temperatures. This research has focused on demonstrating the potential of liquid silicon infiltration (LSI) for making SiC to achieve this goal. The major advantage of this method over other ceramic processing techniques is the enhanced capability of making fully dense, high purity SiC materials in complex net shapes. For successful formation of net shape SiC using LSI techniques, the carbon preform reactivity and pore structure must be controlled to allow the complete infiltration of the porous carbon structure followed by conversion of this carbon to SiC. We have established a procedure for achieving desirable carbon properties by using carbon precursors consisting of two readily available high purity organic materials, crystalline cellulose and phenolic resin. Phenolic resin yields a glassy carbon with low reactivity and porosity, and cellulose carbon is highly reactive and porous. By adjusting the ratio of these two materials in the precursor mixtures, the properties of the carbons produced can be controlled. We have identified the most favorable carbon precursor composition to be a cellulose:resin mass ratio of 6:4 for LSI formation of SiC. The optimum reaction conditions are a temperature of 1800°C, a pressure of 0.5 Torr of argon, and a time of 120 minutes. The fully dense net shape SiC material produced has a density of 2.96 g cm-3 (about 92% of pure SiC) and a SiC volume fraction of over 0.82. Kinetics of the LSI SiC formation process were studied by optical microscopy and quantitative digital image analysis. This study identified six reaction stages and provided important understanding of the process. Such knowledge can be used to further refine the LSI technique. Although the thermal conductivity of pure SiC at elevated temperatures is very high, thermal

  13. Assessment of a New Silicon Carbide Tubular Honeycomb Membrane for Treatment of Olive Mill Wastewaters.

    Science.gov (United States)

    Fraga, Maria C; Sanches, Sandra; Crespo, João G; Pereira, Vanessa J

    2017-02-27

    Extremely high removals of total suspended solids and oil and grease were obtained when olive mill wastewaters were filtered using new silicon carbide tubular membranes. These new membranes were used at constant permeate flux to treat real olive mill wastewaters at pilot scale. The filtration conditions were evaluated and optimized in terms of the selection of the permeate flux and flux maintenance strategies employed-backpulsing and backwashing-in order to reduce fouling formation. The results obtained reveal that the combination of backpulses and backwashes helps to maintain the permeate flux, avoids transmembrane pressure increase and decreases the cake resistance. Moreover, membrane cleaning procedures were compared and the main agents responsible for fouling formation identified. Results also show that, under total recirculation, despite an increased concentration of pollutants in the feed stream, the quality of the permeate is maintained. Membrane filtration using silicon carbide membranes is an effective alternative to dissolved air flotation and can be applied efficiently to remove total suspended solids and oil and grease from olive mill wastewaters.

  14. Influences of Device and Circuit Mismatches on Paralleling Silicon Carbide MOSFETs

    DEFF Research Database (Denmark)

    Li, Helong; Munk-Nielsen, Stig; Wang, Xiongfei

    2016-01-01

    This paper addresses the influences of device and circuit mismatches on paralleling the Silicon Carbide (SiC) MOSFETs. Comprehensive theoretical analysis and experimental validation from paralleled discrete devices to paralleled dies in multichip power modules are first presented. Then, the influ......This paper addresses the influences of device and circuit mismatches on paralleling the Silicon Carbide (SiC) MOSFETs. Comprehensive theoretical analysis and experimental validation from paralleled discrete devices to paralleled dies in multichip power modules are first presented. Then......, the influence of circuit mismatch on paralleling SiC MOSFETs is investigated and experimentally evaluated for the first time. It is found that the mismatch of the switching loop stray inductance can also lead to on-state current unbalance with inductive output current, in addition to the on-state resistance...... of the device. It further reveals that circuit mismatches and a current coupling among the paralleled dies exist in a SiC MOSFET multichip power module, which is critical for the transient current distribution in the power module. Thus, a power module layout with an auxiliary source connection is developed...

  15. SULFUR MOLECULE CHEMISTRY IN SUPERNOVA EJECTA RECORDED BY SILICON CARBIDE STARDUST

    Energy Technology Data Exchange (ETDEWEB)

    Hoppe, Peter [Max Planck Institute for Chemistry, Hahn-Meitner-Weg 1, 55128 Mainz (Germany); Fujiya, Wataru [Department of Earth and Planetary Science, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Zinner, Ernst, E-mail: peter.hoppe@mpic.de, E-mail: fujiya@eps.s.u-tokyo.ac.jp, E-mail: ekz@wustl.edu [Laboratory for Space Sciences and Physics Department, Campus Box 1105, Washington University, St. Louis, MO 63130 (United States)

    2012-02-15

    We studied about 3400 presolar silicon carbide (SiC) grains from the Murchison CM2 meteorite for C- and Si-isotopic compositions. Among these grains we identified 7 unusual or type C SiC (U/C) grains, characterized by isotopically heavy Si, and 36 supernova type X SiC grains, characterized by isotopically light Si. Selected U/C and X grains were also measured for S-, Mg-Al-, and Ca-Ti-isotopic compositions. We show that the U/C grains incorporated radioactive {sup 44}Ti, which is evidence that they formed in the ejecta of Type II supernova (SNII) explosions. Abundances of radioactive {sup 26}Al and {sup 44}Ti are compatible with those observed in X grains. U/C and X grains carry light S with enrichments in {sup 32}S of up to a factor of 2.7. The combination of heavy Si and light S observed in U/C grains is not consistent with abundance predictions of simple supernova models. The isotope data suggest preferential trapping of S from the innermost supernova zones, the production site of radioactive {sup 44}Ti, by the growing silicon carbide particles. A way to achieve this is by sulfur molecule chemistry in the still unmixed ejecta. This confirms model predictions of molecule formation in SNII ejecta and shows that sulfur molecule chemistry operates in the harsh and hot environments of stellar explosions.

  16. Single Side Electrolytic In-Process Dressing (ELID) Grinding with Lapping Kinematics of Silicon Carbide

    Science.gov (United States)

    Khoshaim, Ahmed Bakr

    The demand for Silicon Carbide ceramics (SiC) has increased significantly in the last decade due to its reliable physical and chemical properties. The silicon carbide is widely used for aerospace segments in addition to many uses in the industry. Sometimes, a single side grinding is preferable than conventional grinding, for it has the ability to produce flat ceramics. However, the manufacturing cost is still high because of the high tool wear and long machining time. Part of the solution is to use electrolytic in process dressing (ELID) to reduce the processing time. The study on ELID single side grinding of ceramics has never been attempted before. The study involves four variables with three levels each. One of the variables, which is the eccentricity, is being investigated for the first time on ceramics. A full factorial design, for both the surface roughness and material removal rate, guides to calculate mathematical models that can predict future results. Three grinding wheel mesh sizes are used. An investigation of the influence of different grain size on the results can then be evaluated. The kinematics of the process was studied based on eccentricity in order to optimize the pattern of the diamond grains. The experiment is performed with the assist of the proposed specialized ELID fluid, TRIM C270E.

  17. Properties of ultrathin cholesterol and phospholipid layers surrounding silicon-carbide nanotube: MD simulations.

    Science.gov (United States)

    Raczyński, Przemysław; Raczyńska, Violetta; Górny, Krzysztof; Gburski, Zygmunt

    2015-08-15

    Computer simulation technique was used to study the dynamics of cholesterol and POPC phospholipid molecules forming a thin layer on the surface of the carbon and silicon-carbide nanotubes. Each nanotube was surrounded by an ultra-thin film formed by n lipid molecules, where n varies from 15 to 50. All studies were done for five temperatures, including physiological one (T=260, 285, 310, 335 and 360K). The influence of a nanotube on the dynamics of cholesterol or phospholipid molecules in a layer is presented and discussed. The water is ubiquitous in all biological milieus, where the cholesterol or lipids occur. Thus, simulations were performed in a water environment. Moreover, to show different behavior of lipids in systems with water the results were compared with the samples without it. The dynamical and structural observables, such as the mean square displacement, diffusion coefficient, radial distribution function, and activation energy were calculated to qualitatively investigate the behavior of cholesterol and phospholipid molecules in the layers. We observed remarkable differences between the cholesterol dynamics depending whether the ultrathin film surrounds carbon or silicon-carbide nanotube and whether the water environment appeared. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. Assessment of a New Silicon Carbide Tubular Honeycomb Membrane for Treatment of Olive Mill Wastewaters

    Directory of Open Access Journals (Sweden)

    Maria C. Fraga

    2017-02-01

    Full Text Available Extremely high removals of total suspended solids and oil and grease were obtained when olive mill wastewaters were filtered using new silicon carbide tubular membranes. These new membranes were used at constant permeate flux to treat real olive mill wastewaters at pilot scale. The filtration conditions were evaluated and optimized in terms of the selection of the permeate flux and flux maintenance strategies employed—backpulsing and backwashing—in order to reduce fouling formation. The results obtained reveal that the combination of backpulses and backwashes helps to maintain the permeate flux, avoids transmembrane pressure increase and decreases the cake resistance. Moreover, membrane cleaning procedures were compared and the main agents responsible for fouling formation identified. Results also show that, under total recirculation, despite an increased concentration of pollutants in the feed stream, the quality of the permeate is maintained. Membrane filtration using silicon carbide membranes is an effective alternative to dissolved air flotation and can be applied efficiently to remove total suspended solids and oil and grease from olive mill wastewaters.

  19. External costs of silicon carbide fusion power plants compared to other advanced generation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lechon, Y. E-mail: yolanda.lechon@ciemat.es; Cabal, H.; Saez, R.M.; Hallberg, B.; Aquilonius, K.; Schneider, T.; Lepicard, S.; Ward, D.; Hamacher, T.; Korhonen, R

    2003-09-01

    This study was performed in the framework of the Socio-Economic Research on Fusion (SERF3), which is jointly conducted by Euratom and the fusion associations. Assessments of monetarized external impacts of the fusion fuel-cycle were previously performed (SERF1 and SERF2). Three different power plant designs were studied, with the main difference being the structural materials and cooling system used. In this third phase of the SERF project the external costs of three additional fusion power plant models using silicon carbide as structural material have been analysed. A comparison with other advanced generation technologies expected to be in use around 2050, when the first fusion power plant would be operative, has also been performed. These technologies include advanced fossil technologies, such as Natural Gas Combined Cycle, Pressurised Fluidised Bed Combustion and Integrated Gasification Combined Cycle with carbon sequestration technologies; fuel cells and renewable technologies including geothermal energy, wind energy and photovoltaic systems with energy storage devices. Fusion power plants using silicon carbide as structural material have higher efficiencies than plants using steel and this fact has a very positive effect on the external costs per kW h. These external costs are in the lowest range of the external costs of advanced generation technologies indicating the outstanding environmental performance of fusion power.

  20. Assessment of a New Silicon Carbide Tubular Honeycomb Membrane for Treatment of Olive Mill Wastewaters

    Science.gov (United States)

    Fraga, Maria C.; Sanches, Sandra; Crespo, João G.; Pereira, Vanessa J.

    2017-01-01

    Extremely high removals of total suspended solids and oil and grease were obtained when olive mill wastewaters were filtered using new silicon carbide tubular membranes. These new membranes were used at constant permeate flux to treat real olive mill wastewaters at pilot scale. The filtration conditions were evaluated and optimized in terms of the selection of the permeate flux and flux maintenance strategies employed—backpulsing and backwashing—in order to reduce fouling formation. The results obtained reveal that the combination of backpulses and backwashes helps to maintain the permeate flux, avoids transmembrane pressure increase and decreases the cake resistance. Moreover, membrane cleaning procedures were compared and the main agents responsible for fouling formation identified. Results also show that, under total recirculation, despite an increased concentration of pollutants in the feed stream, the quality of the permeate is maintained. Membrane filtration using silicon carbide membranes is an effective alternative to dissolved air flotation and can be applied efficiently to remove total suspended solids and oil and grease from olive mill wastewaters. PMID:28264453

  1. Growth of nanocrystalline silicon carbide thin films by plasma enhanced chemical vapor deposition

    CERN Document Server

    Lee, S W; Moon, J Y; Ahn, S S; Kim, H Y; Shin, D H

    1999-01-01

    Nanocrystalline silicon carbide thin films have been deposited by plasma enhanced chemical vapor deposition (PECVD) using SiH sub 4 , CH sub 4 , and H sub 2 gases. The effects of gas mixing ratio (CH sub 4 /SiH sub 4), deposition temperature, and RF power on the film properties have been studied. The growth rate, refractive index, and the optical energy gap depends critically on the growth conditions. The dependence of the growth rate on the gas flow ratio is quite different from the results obtained for the growth using C sub 2 H sub 2 gas instead of CH sub 4. As the deposition temperature is increased from 300 .deg. C to 600 .deg. C, hydrogen and carbon content in the film decreases and as a result the optical gap decreases. At the deposition temperature of 600 .deg. C and RF power of 150 W, the film structure si nanocrystalline, As the result of the nanocrystallization the dark conductivity is greatly improved. The nanocrystalline silicon carbide thin films may be used for large area optoelectronic devices...

  2. Device for fracturing silicon-carbide coatings on nuclear-fuel particles

    Science.gov (United States)

    Turner, L.J.; Willey, M.G.; Tiegs, S.M.; Van Cleve, J.E. Jr.

    This invention is a device for fracturing particles. It is designed especially for use in hot cells designed for the handling of radioactive materials. In a typical application, the device is used to fracture a hard silicon-carbide coating present on carbon-matrix microspheres containing nuclear-fuel materials, such as uranium or thorium compounds. To promote remote control and facilitate maintenance, the particle breaker is pneumatically operated and contains no moving parts. It includes means for serially entraining the entrained particles on an anvil housed in a leak-tight chamber. The flow rate of the gas is at a value effecting fracture of the particles; preferably, it is at a value fracturing them into product particulates of fluidizable size. The chamber is provided with an outlet passage whose cross-sectional area decreases in the direction away from the chamber. The outlet is connected tangentially to a vertically oriented vortex-flow separator for recovering the product particulates entrained in the gas outflow from the chamber. The invention can be used on a batch or continuous basis to fracture the silicon-carbide coatings on virtually all of the particles fed thereto.

  3. Modification of silicon nitride and silicon carbide surfaces for food and biosensor applications

    NARCIS (Netherlands)

    Rosso, M.

    2009-01-01

    Silicon-rich silicon nitride (SixN4, x > 3) is a robust insulating material widely used for the coating of microdevices: its high chemical and mechanical inertness make it a material of choice for the reinforcement of fragile microstructures (e.g. suspended microcantilevers, micro-fabricated memb

  4. Modification of silicon nitride and silicon carbide surfaces for food and biosensor applications

    NARCIS (Netherlands)

    Rosso, M.

    2009-01-01

    Silicon-rich silicon nitride (SixN4, x > 3) is a robust insulating material widely used for the coating of microdevices: its high chemical and mechanical inertness make it a material of choice for the reinforcement of fragile microstructures (e.g. suspended microcantilevers, micro-fabricated

  5. Thermal degradation study of silicon carbide threads developed for advanced flexible thermal protection systems

    Science.gov (United States)

    Tran, Huy Kim; Sawko, Paul M.

    1992-01-01

    Silicon carbide (SiC) fiber is a material that may be used in advanced thermal protection systems (TPS) for future aerospace vehicles. SiC fiber's mechanical properties depend greatly on the presence or absence of sizing and its microstructure. In this research, silicon dioxide is found to be present on the surface of the fiber. Electron Spectroscopy for Chemical Analysis (ESCA) and Scanning Electron Microscopy (SEM) show that a thin oxide layer (SiO2) exists on the as-received fibers, and the oxide thickness increases when the fibers are exposed to high temperature. ESCA also reveals no evidence of Si-C bonding on the fiber surface on both as-received and heat treated fibers. The silicon oxide layer is thought to signal the decomposition of SiC bonds and may be partially responsible for the degradation in the breaking strength observed at temperatures above 400 C. The variation in electrical resistivity of the fibers with increasing temperature indicates a transition to a higher band gap material at 350 to 600 C. This is consistent with a decomposition of SiC involving silicon oxide formation.

  6. Silicon Carbide Micro/Nano Systems for Demanding and Harsh Environment Applications

    Science.gov (United States)

    Mehregany, Mehran

    2008-03-01

    Micro/nano systems enable the development of smart products and systems by augmenting the computational ability of microelectronics with the perception and control capabilities of sensors and actuators. Micro/nano systems are also known as micro- and nanoelectromechanical systems (MEMS and NEMS), and have been commercialized in a wide range of applications including crash sensing, blood pressure measurement, optical projection, and fluid flow control to name a few. Silicon, in single- and polycrystalline forms, has been the platform semiconductor material underpinning the fabrication of the mechanical and electronic elements of micro/nano systems. However, the materials properties of silicon impose limitations on its use in harsh environment and demanding applications--for example, those involving operation in the presence of high temperatures, corrosive media, high shock loads, erosive flows, and/or high radiation, or involving performance requirements for the mechanical elements that are beyond silicon's capabilities. Silicon carbide (SiC) is an alternative platform semiconductor material that enables such applications because of its wider bandgap and higher melting/sublimation temperature, elastic modulus, fracture toughness, hardness, chemical inertness, and thermal conductivity. This talk will highlight our most recent SiC material, process, and device advances to enable sensing and actuation in applications such as propulsion instrumentation/control, power generation, resource exploration, nuclear reactor instrumentation, deep space exploration, and communications.

  7. Synthesis of Silicon Nitride and Silicon Carbide Nanocomposites through High Energy Milling of Waste Silica Fume for Structural Applications

    Science.gov (United States)

    Suri, Jyothi

    Nanocomposites have been widely used in a multitude of applications in electronics and structural components because of their improved mechanical, electrical, and magnetic properties. Silicon nitride/Silicon carbide (Si 3N4/SiC) nanocomposites have been studied intensively for low and high temperature structural applications, such as turbine and automobile engine components, ball bearings, turbochargers, as well as energy applications due to their superior wear resistance, high temperature strength, high oxidation resistance and good creep resistance. Silica fume is the waste material produced during the manufacture of silicon and ferro-silicon alloys, and contains 94 to 97 wt.% SiO2. In the present dissertation, the feasibility of using waste silica fume as the raw material was investigated to synthesize (I) advanced nanocomposites of Si3N4/SiC, and (2) porous silicon carbide (SiC) for membrane applications. The processing approach used to convert the waste material to advanced ceramic materials was based on a novel process called, integrated mechanical and thermal activation process (IMTA) process. In the first part of the dissertation, the effect of parameters such as carbothermic nitridation and reduction temperature and the graphite concentration in the starting silica fume plus graphite mixture, were explored to synthesize nanocomposite powders with tailored amounts of Si3N4 and SiC phases. An effective way to synthesize carbon-free Si3N 4/SiC composite powders was studied to provide a clear pathway and fundamental understanding of the reaction mechanisms. Si3N4/SiC nanocomposite powders were then sintered using two different approaches, based on liquid phase sintering and spark plasma sintering processes, with Al 2O3 and Y2O3 as the sintering aids. The nanocomposites were investigated for their densification behavior, microstructure, and mechanical properties. Si3N4/SiC nanocomposites thus obtained were found to possess superior mechanical properties at much

  8. Review of corrosion behavior of ceramic heat exchanger materals: Corrosion characteristics of silicon carbide and silicon nitride. Final report, September 11, 1992--March 11, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Munro, R.G.; Dapkunas, S.J.

    1993-09-01

    The present work is a review of the substantial effort that has been made to measure and understand the effects of corrosion with respect to the properties, performance, and durability of various forms of silicon carbide and silicon nitride. The review encompasses corrosion in diverse environments, usually at temperatures of 1000C or higher. The environments include dry and moist oxygen, mixtures of hot gaseous vapors, molten salts, molten metals, and complex environments pertaining to coal ashes and slags.

  9. Measurement of electron spin transport in graphene on 6H-silicon carbide(0001)

    Science.gov (United States)

    Abel, Joseph

    The focus of this thesis is to demonstrate the potential of wafer scale graphene spintronics. Graphene is a single atomic layer of sp 2-bonded carbon atoms that has high carrier mobilities, making it a desirable material for future nanoscale electronic devices. The vision of spintronics is to utilize the spin of the electron to produce novel high-speed low power consuming devices. Materials with long spin relaxation times and spin diffusion lengths are needed to realize these goals. Graphene is an ideal material as it meets these requirements and is amenable to planar device geometries. In this thesis, spin transport in wafer scale epitaxial graphene grown on the silicon face of silicon carbide is demonstrated. Non-local Hanle spin precession measurement devices were fabricated using graphene with and without a hafnium oxide interface layer between the ferromagnetic metal and graphene. The structural properties of the devices were investigated with Raman spectroscopy, x-ray photoelectric spectroscopy, Rutherford backscattering spectroscopy, scanning electron microscopy, atomic force microscopy, and transmission electron microscopy. The electrical properties of the graphene were measured utilizing Hall transport measurements. The magnetic properties of the contacts were investigated with vibrating sample magnetometery. The processes developed to fabricate the Hanle measurement devices are presented as well. A custom Hanle measurement setup was developed and utilized for the Hanle spin precession measurements. Spin precession is observed in the epitaxial graphene on silicon carbide, with improved spin transport properties with the utilization of a hafnium oxide barrier between the ferromagnetic contacts and graphene. The charge transport and spin transport properties are compared to determine the relevant spin relaxation mechanism in the devices. These results demonstrate that graphene has great potential for wafer scale production of future spintronic devices.

  10. 2H-SiC Dendritic Nanocrystals In Situ Formation from Amorphous Silicon Carbide under Electron Beam Irradiation

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Under electron beam irradiation, the in-situ formation of 2H-SiC dentritic nanocrystals from amorphous silicon carbide at room temperature was observed. The homogenous transition mainly occurs at the thin edge and on the surface of specimen where the energy obtained from electron beam irradiation is high enough to cause the amorphous crystallizing into 2H-SiC.

  11. CBr{sub 4} as precursor for VPE growth of cubic silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Watts, B.E.; Attolini, G. [IMEM-CNR Institute Parco Area delle Scienze 37 A, 43124 Parma (Italy); Battistig, G.; Dobos, L.; Pecz, B. [Research Institute for Technical Physics and Materials Science, Hungarian Academy of Sciences, P.O. Box 49, 1525 Budapest (Hungary); Bosi, M.

    2010-06-15

    This work presents a study of carbon tetrabromide (CBr{sub 4}) as precursor to deposit 3C-SiC on (001) and (111) Si by VPE technique at temperatures ranging between 1000 C and 1250 C. TEM, AFM and SEM results indicate that the epitaxy proceeds as a 3D growth of uncoalesced islands at low temperature, whereas a continuous crystalline layer with hillocks on top is obtained above 1200 C. The hillocks observed at high temperature appear well faceted and their shape and orientation are analyzed in detail by AFM, showing a {l_brace}311{r_brace} preferred orientation. 3D island growth was suppressed by adding C{sub 3}H{sub 8} to the precursor gases. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  12. Modeling the flow of molten silicon in porous carbon preforms and the subsequent formation of silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Rajesh, G.; Bhagat, R.B. [Pennsylvania State Univ., University Park, PA (United States). Engineering Science and Mechanics Dept.; Nelson, E. [National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center

    1995-10-01

    In this investigation, the authors have modeled the formation of silicon carbide during the infiltration of porous carbon preforms, and predicted the amount of SiC formed only due to reaction between Si and C, coupled with diffusion. For a two-dimensional representative volume element (RVE) of a carbon preform with 30% volume fraction of carbon, they have numerically predicted the concentration profiles of Si and SiC, based on coupled reaction and diffusion. Consideration of only reaction and diffusion as a mechanism of formation of SiC in the model is not adequate for an efficient conversion of Si to SiC, leading thereby to the presence of residual Si. Finally, a two-dimensional approach to predict the transient permeability in the preform in relation to the transient change in porosity in an RVE, was discussed.

  13. Simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by slurry-sampling graphite furnace AAS.

    Science.gov (United States)

    Minami, Hirotsugu; Yada, Masako; Yoshida, Tomomi; Zhang, Qiangbin; Inoue, Sadanobu; Atsuya, Ikuo

    2004-03-01

    A fast and accurate analytical method was established for the simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by graphite furnace atomic absorption spectrometry using a slurry sampling technique and a Hitachi Model Z-9000 atomic absorption spectrometer. The slurry samples were prepared by the ultrasonication of silicon carbide or silicon nitride powders with 0.1 M nitric acid. Calibration curves were prepared by using a mixed standard solution containing aluminum, calcium, iron and 0.1 M nitric acid. The analytical results of the proposed method for aluminum, calcium and iron in silicon carbide and silicon nitride reference materials were in good agreement with the reference values. The detection limits for aluminum, calcium and iron were 0.6 microg/g, 0.15 microg/g and 2.5 microg/g, respectively, in solid samples, when 200 mg of powdered samples were suspended in 20 ml of 0.1 M nitric acid and a 10 microl portion of the slurry sample was then measured. The relative standard deviation of the determination of aluminum, calcium and iron was 5 - 33%.

  14. Hydrogen desorption from hydrogen fluoride and remote hydrogen plasma cleaned silicon carbide (0001) surfaces

    Energy Technology Data Exchange (ETDEWEB)

    King, Sean W., E-mail: sean.king@intel.com; Tanaka, Satoru; Davis, Robert F. [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); Nemanich, Robert J. [Department of Physics, North Carolina State University, Raleigh, North Carolina 27695 (United States)

    2015-09-15

    Due to the extreme chemical inertness of silicon carbide (SiC), in-situ thermal desorption is commonly utilized as a means to remove surface contamination prior to initiating critical semiconductor processing steps such as epitaxy, gate dielectric formation, and contact metallization. In-situ thermal desorption and silicon sublimation has also recently become a popular method for epitaxial growth of mono and few layer graphene. Accordingly, numerous thermal desorption experiments of various processed silicon carbide surfaces have been performed, but have ignored the presence of hydrogen, which is ubiquitous throughout semiconductor processing. In this regard, the authors have performed a combined temperature programmed desorption (TPD) and x-ray photoelectron spectroscopy (XPS) investigation of the desorption of molecular hydrogen (H{sub 2}) and various other oxygen, carbon, and fluorine related species from ex-situ aqueous hydrogen fluoride (HF) and in-situ remote hydrogen plasma cleaned 6H-SiC (0001) surfaces. Using XPS, the authors observed that temperatures on the order of 700–1000 °C are needed to fully desorb C-H, C-O and Si-O species from these surfaces. However, using TPD, the authors observed H{sub 2} desorption at both lower temperatures (200–550 °C) as well as higher temperatures (>700 °C). The low temperature H{sub 2} desorption was deconvoluted into multiple desorption states that, based on similarities to H{sub 2} desorption from Si (111), were attributed to silicon mono, di, and trihydride surface species as well as hydrogen trapped by subsurface defects, steps, or dopants. The higher temperature H{sub 2} desorption was similarly attributed to H{sub 2} evolved from surface O-H groups at ∼750 °C as well as the liberation of H{sub 2} during Si-O desorption at temperatures >800 °C. These results indicate that while ex-situ aqueous HF processed 6H-SiC (0001) surfaces annealed at <700 °C remain terminated by some surface C–O and

  15. Silver diffusion through silicon carbide in microencapsulated nuclear fuels TRISO; Difusion de plata a traves de carburo de silicio en combustibles nucleares microencapsulados TRISO

    Energy Technology Data Exchange (ETDEWEB)

    Cancino T, F.; Lopez H, E., E-mail: Felix.cancino@cinvestav.edu.mx [IPN, Centro de Investigacion y de Estudios Avanzados, Unidad Saltillo, Av. Industria Metalurgica No. 1062, Col. Ramos Arizpe, 25900 Saltillo, Coahuila (Mexico)

    2013-10-15

    The silver diffusion through silicon carbide is a challenge that has persisted in the development of microencapsulated fuels TRISO (Tri structural Isotropic) for more than four decades. The silver is known as a strong emitter of gamma radiation, for what is able to diffuse through the ceramic coatings of pyrolytic coal and silicon carbide and to be deposited in the heat exchangers. In this work we carry out a recount about the art state in the topic of the diffusion of Ag through silicon carbide in microencapsulated fuels and we propose the role that the complexities in the grain limit can have this problem. (Author)

  16. Research Status and Developing Trend of Silicon Carbide foam Ceramic%碳化硅泡沫陶瓷的制备工艺研究进展

    Institute of Scientific and Technical Information of China (English)

    陈璐; 黎阳; 刘卫

    2011-01-01

    本文概述了碳化硅泡沫陶瓷的主要应用领域,着重介绍了近年来碳化硅泡沫陶瓷的制备工艺,并评述了其优缺点,最后针对目前的不足提出了碳化硅泡沫陶瓷未来的发展方向.%This article has described the main applications of silicon carbide foam ceramics. The traditional and new preparation methods of silicon carbide foam ceramics are introduced. The prospects for silicon carbide foam ceramics are explored.

  17. Robust Phonon-Plasmon Coupling in Quasifreestanding Graphene on Silicon Carbide.

    Science.gov (United States)

    Koch, R J; Fryska, S; Ostler, M; Endlich, M; Speck, F; Hänsel, T; Schaefer, J A; Seyller, Th

    2016-03-11

    Using inelastic electron scattering in combination with dielectric theory simulations on differently prepared graphene layers on silicon carbide, we demonstrate that the coupling between the 2D plasmon of graphene and the surface optical phonon of the substrate cannot be quenched by modification of the interface via intercalation. The intercalation rather provides additional modes like, e.g., the silicon-hydrogen stretch mode in the case of hydrogen intercalation or the silicon-oxygen vibrations for water intercalation that couple to the 2D plasmons of graphene. Furthermore, in the case of bilayer graphene with broken inversion symmetry due to charge imbalance between the layers, we observe a similar coupling of the 2D plasmon to an internal infrared-active mode, the LO phonon mode. The coupling of graphene plasmons to vibrational modes of the substrate surface and internal infrared active modes is envisioned to provide an excellent tool for tailoring the plasmon band structure of monolayer and bilayer graphene for plasmonic devices such as plasmon filters or plasmonic waveguides. The rigidity of the effect furthermore suggests that it may be of importance for other 2D materials as well.

  18. Fullerene freejets-based synthesis of silicon carbide: heteroepitaxial growth on Si(111) at low temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Aversa, L.; Verucchi, R.; Boschetti, A.; Podesta, A.; Milani, P.; Iannotta, S

    2003-08-15

    The growth of silicon carbide (SiC), a large band-gap semiconductor, on Si is very promising for applications to sensors, electronics and optoelectronics. However, difficulties in controlling the growth of the material and the interface have inhibited the production of SiC based devices. We have developed a new technique (Supersonic Molecular Beam Epitaxy, SuMBE) for the heteroepitaxial growth of SiC on Si by means of supersonic molecular beams of fullerene (C{sub 60}). The carbide synthesis can be induced by the kinetic activation of the process due to the kinetic energy released in C{sub 60}-Si collision. This has made possible a reduction of the growth substrate temperature and an improvement of electronic and structural properties of the SiC film. We present a study of the processes governing the growth of very thin SiC film by C{sub 60} supersonic beam. Two films were grown in Ultra High Vacuum (UHV) on Si(111)-7x7, at substrate temperature of 800 deg. C, using the same fullerene beam but selecting C{sub 60} particles having different characteristics. Surface electronic and structural characterizations were done both in situ and ex situ. The results show that strongly different growth processes can be achieved by controlling the precursor kinetic energy.

  19. X-ray powder diffraction analysis of liquid-phase-sintered silicon carbide ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, A.L.; Sanchez-Bajo, F. [Universidad de Extremadura, Badajoz (Spain). Dept. de Electronica e Ingenieria Electromecanica; Cumbrera, F.L. [Universidad de Extremadura, Badajoz (Spain). Dept. de Fisica

    2002-07-01

    In an attempt to gain a comprehensive understanding of the microstructural evolution in liquid-phase-sintered silicon carbide ceramics, the effect of the starting {beta}-SiC powder has been studied. Pellets of two different {beta}-SiC starting powders were sintered with simultaneous additions of Al{sub 2}O{sub 3} and Y{sub 2}O{sub 3} at 1950 C for 1 hour in flowing argon atmosphere. Here we have used X-ray diffraction to obtain the relative abundance of the resulting SiC polytypes after sintering. The significant influence of the defects concentration on the {beta} to {alpha} transformation rate has been determined using the Rietveld method. (orig.)

  20. Design and finite element analysis of lightmass silicon carbide primary mirror

    Institute of Scientific and Technical Information of China (English)

    HAN Yuan-yuan; ZHANG Yu-min; HAN Jie-cai; ZHANG Jian-han; YAO Wang; ZHOU Yu-feng

    2006-01-01

    Primary mirror is one of the key components in the space remote sensing system. To minimize the mass of the mirror without compromising its stiffness and decrease the deformation of the mirror surface at the different temperatures are the mainly two objects in the development of the primary mirror. Silicon carbide (SiC),the most promising optical material,was used as the material of the primary mirror with triangle lightmass structure in a Cassegrain system. By using finite element method,the properties of the SiC mirror were compared with that of the traditional Be mirror and fused silica mirror. The results of static,dynamic and thermo-mechanical analysis indicate that the deformation of the mirror surface caused by temperature field is much bigger than that caused by gravity field. The SiC mirror has the best overall properties,and the SiC material is much suitable for the primary mirror.

  1. Ab initio density functional theory investigation of structural and electronic properties of silicon carbide nanotube bundles

    Energy Technology Data Exchange (ETDEWEB)

    Moradian, Rostam [Physics Department, Faculty of Science, Razi University, Kermanshah (Iran, Islamic Republic of); Nano Science and Technology Research Center, Razi University, Kermanshah (Iran, Islamic Republic of); Department of Nano Science, Computational Physical Science Research Laboratory, Institute for Studies in Theoretical Physics and Mathematics (IPM), P.O. Box 19395-5531, Tehran (Iran, Islamic Republic of)], E-mail: moradian.rostam@gmail.com; Behzad, Somayeh; Chegel, Raad [Physics Department, Faculty of Science, Razi University, Kermanshah (Iran, Islamic Republic of)

    2008-10-01

    By using ab initio density functional theory the structural and electronic properties of isolated and bundled (8,0) and (6,6) silicon carbide nanotubes (SiCNTs) are investigated. Our results show that for such small diameter nanotubes the inter-tube interaction causes a very small radial deformation, while band splitting and reduction of the semiconducting energy band gap are significant. We compared the equilibrium interaction energy and inter-tube separation distance of (8,0) SiCNT bundle with (10,0) carbon nanotube (CNT) bundle where they have the same radius. We found that there is a larger inter-tube separation and weaker inter-tube interaction in the (8,0) SiCNT bundle with respect to (10,0) CNT bundle, although they have the same radius.

  2. Ab initio density functional theory investigation of Li-intercalated silicon carbide nanotube bundles

    Energy Technology Data Exchange (ETDEWEB)

    Moradian, Rostam [Physics Department, Faculty of Science, Razi University, Kermanshah (Iran, Islamic Republic of); Nano Science and Technology Research Center, Razi University, Kermanshah (Iran, Islamic Republic of); Computational Physical Science Research Laboratory, Department of Nano Science, Institute for Studies in Theoretical Physics and Mathematics (IPM), PO Box 19395-5531, Tehran (Iran, Islamic Republic of)], E-mail: moradian.rostam@gmail.com; Behzad, Somayeh; Chegel, Raad [Physics Department, Faculty of Science, Razi University, Kermanshah (Iran, Islamic Republic of)

    2009-06-15

    We present the results of ab initio density functional theory calculations on the energetic, and geometric and electronic structure of Li-intercalated (6,6) silicon carbide nanotube (SiCNT) bundles. Our results show that intercalation of lithium leads to the significant changes in the geometrical structure. The most prominent effect of Li intercalation on the electronic band structure is a shift of the Fermi energy which occurs as a result of charge transfer from lithium to the SiCNTs. All the Li-intercalated (6,6) SiCNT bundles are predicted to be metallic representing a substantial change in electronic properties relative to the undoped bundle, which is a wide band gap semiconductor. Both inside of the nanotube and the interstitial space are susceptible for intercalation. The present calculations suggest that the SiCNT bundle is a promising candidate for the anode material in battery applications.

  3. Tuning the thermal conductivity of silicon carbide by twin boundary: a molecular dynamics study

    Science.gov (United States)

    Liu, Qunfeng; Luo, Hao; Wang, Liang; Shen, Shengping

    2017-02-01

    Silicon carbide (SiC) is a semiconductor with excellent mechanical and physical properties. We study the thermal transport in SiC by using non-equilibrium molecular dynamics simulations. The work is focused on the effects of twin boundaries and temperature on the thermal conductivity of 3C-SiC. We find that compared to perfect SiC, twinned SiC has a markedly reduced thermal conductivity when the twin boundary spacing is less than 100 nm. The Si-Si twin boundary is more effective to phonon scattering than the C-C twin boundary. We also find that the phonon scattering effect of twin boundary decreases with increasing temperature. Our findings provide insights into the thermal management of SiC-based electronic devices and thermoelectric applications.

  4. Performance of Silicon carbide whisker reinforced ceramic inserts on Inconel 718 in end milling process

    Science.gov (United States)

    Reddy, M. M.; Joshua, C. X. H.

    2016-03-01

    An experimental investigation is planned in order to study the machinability of Inconel 718 with silicon carbide whisker reinforced ceramic inserts in end milling process. The relationship between the cutting speed, feed rate, and depth of cut against the response factors are studied to show the level of significance of each parameter. The cutting parameters are optimized by using Taguchi method. Implementing analysis of variance, the parameter which influences the surface roughness the most is determined to be the cutting speed, followed by the feed rate and depth of cut. Meanwhile, the optimal cutting condition is determined to have high cutting speed, low feed rate, and high depth of cut in the range of selected parameters.

  5. Power monitoring in space nuclear reactors using silicon carbide radiation detectors

    Science.gov (United States)

    Ruddy, Frank H.; Patel, Jagdish U.; Williams, John G.

    2005-01-01

    Space reactor power monitors based on silicon carbide (SiC) semiconductor neutron detectors are proposed. Detection of fast leakage neutrons using SiC detectors in ex-core locations could be used to determine reactor power: Neutron fluxes, gamma-ray dose rates and ambient temperatures have been calculated as a function of distance from the reactor core, and the feasibility of power monitoring with SiC detectors has been evaluated at several ex-core locations. Arrays of SiC diodes can be configured to provide the required count rates to monitor reactor power from startup to full power Due to their resistance to temperature and the effects of neutron and gamma-ray exposure, SiC detectors can be expected to provide power monitoring information for the fill mission of a space reactor.

  6. SILICON CARBIDE MICRO-DEVICES FOR COMBUSTION GAS SENSING UNDER HARSH CONDITIONS

    Energy Technology Data Exchange (ETDEWEB)

    Ruby N. Ghosh; Peter Tobias; Roger G. Tobin

    2004-04-01

    A sensor based on the wide bandgap semiconductor, silicon carbide (SiC), has been developed for the detection of combustion products in power plant environments. The sensor is a catalytic gate field effect device that can detect hydrogen containing species in chemically reactive, high temperature environments. Robust metallization and electrical contacting techniques have been developed for device operation at elevated temperatures. To characterize the time response of the sensor responses in the millisecond range, a conceptually new apparatus has been built. Software has been developed to cope with the requirements of fast sensor control and data recording. In addition user friendly software has been developed to facilitate use of the SiC sensors for industrial process control applications.

  7. Use of Silicon Carbide as Beam Intercepting Device Material: Tests, Issues and Numerical Simulations

    CERN Document Server

    Delonca, M; Gil Costa, M; Vacca, A

    2014-01-01

    Silicon Carbide (SiC) stands as one of the most promising ceramic material with respect to its thermal shock resistance and mechanical strengths. It has hence been considered as candidate material for the development of higher performance beam intercepting devices at CERN. Its brazing with a metal counterpart has been tested and characterized by means of microstructural and ultrasound techniques. Despite the positive results, its use has to be evaluated with care, due to the strong evidence in literature of large and permanent volumetric expansion, called swelling, under the effect of neutron and ion irradiation. This may cause premature and sudden failure, and can be mitigated to some extent by operating at high temperature. For this reason limited information is available for irradiation below 100°C, which is the typical temperature of interest for beam intercepting devices like dumps or collimators. This paper describes the brazing campaign carried out at CERN, the results, and the theoretical and numeric...

  8. Near-Field Radiative Heat Transfer between Metamaterials coated with Silicon Carbide Film

    CERN Document Server

    Basu, Soumyadipta; Wang, Liping

    2014-01-01

    In this letter, we study the near-field radiative heat transfer between two metamaterial substrates coated with silicon carbide (SiC) thin films. It is known that metamaterials can enhance the near-field heat transfer over ordinary materials due to excitation of magnetic plasmons associated with s polarization, while strong surface phonon polariton exists for SiC.By careful tuning of the optical properties of metamaterial it is possible to excite electrical and magnetic resonance for the metamaterial and surface phonon polaritons for SiC at different spectral regions, resulting in the enhanced heat transfer. The effect of the SiC film thickness at different vacuum gaps is investigated. Results obtained from this study will be beneficial for application of thin film coatings for energy harvesting.

  9. Pulsed laser deposition of tungsten carbide thin films on silicon (100) substrate

    Science.gov (United States)

    Suda, Y.; Nakazono, T.; Ebihara, K.; Baba, K.

    1997-01-01

    A method of synthesizing tungsten carbide (WC) thin films by a pulsed YAG laser deposition is investigated. WC thin films are deposited on silicon (100) substrates by using WC5%Co alloy targets. Glancing angle X-ray diffraction shows that the strong peaks of W 2C appear at the substrate temperature of 500°C. Beside the strong peaks of W 2C, weak peaks of WC and W 3Co 3C appear at the substrate temperature of 650°C. Auger electron spectroscopy shows that the almost stoichiometric WC films are deposited at the methane gas pressure of 1.0 Pa. Morphological features of the samples have been obtained by employing the technique of scanning electron microscopy. X-ray photoelectron spectroscopy has been used to obtain structural and compositional information about the samples.

  10. High Input Voltage Discharge Supply for High Power Hall Thrusters Using Silicon Carbide Devices

    Science.gov (United States)

    Pinero, Luis R.; Scheidegger, Robert J.; Aulsio, Michael V.; Birchenough, Arthur G.

    2014-01-01

    A power processing unit for a 15 kW Hall thruster is under development at NASA Glenn Research Center. The unit produces up to 400 VDC with two parallel 7.5 kW discharge modules that operate from a 300 VDC nominal input voltage. Silicon carbide MOSFETs and diodes were used in this design because they were the best choice to handle the high voltage stress while delivering high efficiency and low specific mass. Efficiencies in excess of 97 percent were demonstrated during integration testing with the NASA-300M 20 kW Hall thruster. Electromagnet, cathode keeper, and heater supplies were also developed and will be integrated with the discharge supply into a vacuum-rated brassboard power processing unit with full flight functionality. This design could be evolved into a flight unit for future missions that requires high power electric propulsion.

  11. Joining of silicon carbide using interlayer with matching coefficient of thermal expansion

    Energy Technology Data Exchange (ETDEWEB)

    Perham, T. [Univ. of California, Berkeley, CA (United States). Dept. of Materials Science and Mineral Engineering]|[Lawrence Berkeley National Lab., CA (United States)

    1996-11-01

    The primary objective of this study is to develop a technique for joining a commercially available Silicon Carbide that gives good room temperature strength and the potential for good high temperature strength. One secondary objective is that the joining technique be adaptable to SiC{sub f}/SiC composites and/or Nickel based superalloys, and another secondary objective is that the materials provide good neutron irradiation resistance and low activation for potential application inside nuclear fusion reactors. The joining techniques studied here are: (1) reaction bonding with Al-Si/Si/SiC/C; (2) reaction/infiltration with calcium aluminum silicate; (3) ion exchange mechanism to form calcium hexaluminate (a refractory cement); and (4) oxide frit brazing with cordierite.

  12. Graphitization of n-type polycrystalline silicon carbide for on-chip supercapacitor application

    Science.gov (United States)

    Liu, Fang; Gutes, Albert; Laboriante, Ian; Carraro, Carlo; Maboudian, Roya

    2011-09-01

    Synthesis of silicon carbide-derived carbon films with excellent supercapacitor characteristics is demonstrated by a process that is fully compatible with standard microfabrication technology. NiTi alloy deposited on nitrogen-doped polycrystalline SiC films is shown to result in the growth of a rough, porous, high conductivity, nanocrystalline graphitic carbon film upon rapid thermal annealing to 1050 °C. Electrodes fabricated in this manner exhibit high charge/discharge rates with a time constant of about 0.062 s. Analysis shows that the incorporated nitrogen in the carbon electrode may induce pseudo-capacitance, and the electrodes exhibit the capacitance/area values comparable to those reported on carbon nanotube-based supercapacitors.

  13. High-frequency and high-quality silicon carbide optomechanical microresonators

    CERN Document Server

    Lu, Xiyuan; Lin, Qiang

    2015-01-01

    Silicon carbide (SiC) exhibits excellent material properties attractive for broad applications. We demonstrate the first SiC optomechanical microresonators that integrate high mechanical frequency, high mechanical quality, and high optical quality into a single device. The radial-breathing mechanical mode has a mechanical frequency up to 1.69 GHz with a mechanical Q around 5500 in atmosphere, which corresponds to a mechanical f-Q product as high as 9.47x10^12 Hz. The strong optomechanical coupling allows us to efficiently excite and probe the coherent mechanical oscillation by optical waves. The demonstrated devices, in combination with the superior thermal property, chemical inertness, and defect characteristics of SiC, show great potential for applications in metrology, sensing, and quantum photonics, particularly in harsh environments that are challenging for other device platforms.

  14. Magnetoresistive polyaniline-silicon carbide metacomposites: plasma frequency determination and high magnetic field sensitivity.

    Science.gov (United States)

    Gu, Hongbo; Guo, Jiang; Khan, Mojammel Alam; Young, David P; Shen, T D; Wei, Suying; Guo, Zhanhu

    2016-07-20

    The Drude model modified by Debye relaxation time was introduced to determine the plasma frequency (ωp) in the surface initiated polymerization (SIP) synthesized β-silicon carbide (β-SiC)/polyaniline (PANI) metacomposites. The calculated plasma frequency for these metacomposites with different loadings of β-SiC nanoparticles was ranging from 6.11 × 10(4) to 1.53 × 10(5) rad s(-1). The relationship between the negative permittivity and plasma frequency indicates the existence of switching frequency, at which the permittivity was changed from negative to positive. More interestingly, the synthesized non-magnetic metacomposites, observed to follow the 3-dimensional (3-D) Mott variable range hopping (VRH) electrical conduction mechanism, demonstrated high positive magnetoresistance (MR) values of up to 57.48% and high MR sensitivity at low magnetic field regimes.

  15. Bright and stable visible-spectrum single photon emitter in silicon carbide

    CERN Document Server

    Lienhard, Benjamin; Mouradian, Sara; Dolde, Florian; Tran, Toan Trong; Aharonovich, Igor; Englund, Dirk R

    2016-01-01

    Single photon sources are of paramount importance in quantum communication, quantum computation, and quantum metrology. In particular, there is great interest to realize scalable solid state platforms that can emit triggered photons on demand to achieve scalable nanophotonic networks. We report on a visible-spectrum single photon emitter in 4H-silicon carbide (SiC). The emitter is photostable at room- and low-temperature enabling photon counts per second (cps) in excess of 2$\\times$10$^6$ from unpatterned, bulk SiC. It exists in two orthogonally polarized states, which have parallel absorption and emission dipole orientations. Low temperature measurements reveal a narrow zero phonon line (linewidth $30~$% of the total photoluminescence spectrum.

  16. Note: Silicon Carbide Telescope Dimensional Stability for Space-based Gravitational Wave Detectors

    Science.gov (United States)

    Sanjuah, J.; Korytov, D.; Mueller, G.; Spannagel, R.; Braxmaier, C.; Preston, A.; Livas, J.

    2012-01-01

    Space-based gravitational wave detectors are conceived to detect gravitational waves in the low frequency range by measuring the distance between proof masses in spacecraft separated by millions of kilometers. One of the key elements is the telescope which has to have a dimensional stability better than 1 pm Hz(exp -1/2) at 3 mHz. In addition, the telescope structure must be light, strong, and stiff. For this reason a potential telescope structure consisting of a silicon carbide quadpod has been designed, constructed, and tested. We present dimensional stability results meeting the requirements at room temperature. Results at -60 C are also shown although the requirements are not met due to temperature fluctuations in the setup.

  17. Silicon carbide-based hydrogen gas sensors for high-temperature applications.

    Science.gov (United States)

    Kim, Seongjeen; Choi, Jehoon; Jung, Minsoo; Joo, Sungjae; Kim, Sangchoel

    2013-10-09

    We investigated SiC-based hydrogen gas sensors with metal-insulator-semiconductor (MIS) structure for high temperature process monitoring and leak detection applications in fields such as the automotive, chemical and petroleum industries. In this work, a thin tantalum oxide (Ta2O5) layer was exploited with the purpose of sensitivity improvement, because tantalum oxide has good stability at high temperature with high permeability for hydrogen gas. Silicon carbide (SiC) was used as a substrate for high-temperature applications. We fabricated Pd/Ta2O5/SiC-based hydrogen gas sensors, and the dependence of their I-V characteristics and capacitance response properties on hydrogen concentrations were analyzed in the temperature range from room temperature to 500 °C. According to the results, our sensor shows promising performance for hydrogen gas detection at high temperatures.

  18. POSSIBILITY RESEARCH FOR SILICON CARBIDE BULK CRYSTALS GROWTH OF 3C POLYTYPE FOR POWER DEVICES

    Directory of Open Access Journals (Sweden)

    P. V. Bulat

    2014-05-01

    Full Text Available The paper deals with creation of heteropolytypes instrument structures on silicon carbide for power devices not subjected to degradation of electrical properties. The phenomenon of polytypism is considered. Characteristics of different SiC polytypes are given. Information is cited about the causes and effects for degradation of p-n -structures of power devices based on SiC at large density direct current passing. It is shown that hetero-transitions between SiC polytypes may have more structural perfection than hetero-transitions between semiconductors with different chemical nature. Conclusion is made about application prospects for heterostructures based on 3C-SiC polytype in devices of modern power electronics. A brief overview of the possible methods for 3C-SiC single crystals growth is done. A basic scheme for creation of heteropolytype 3C-SiC structures based on substrates of 6H-SiC polytype is suggested.

  19. The Synthesis of Silicon Carbide in Rhombohedral Form with Different Chemicals

    Science.gov (United States)

    KARİPER, İ. AFŞIN

    2017-06-01

    This study describes the attempt at producing silicon carbide using a simpler and less costly method. Within the study, XRD, EDX, and FTIR analyses were performed to determine the structural properties of the product, and SEM analyses were used to identify its surface properties. The characteristics such as porosity and surface area were determined through BET analysis. The starting reagents were compared with the product using FTIR analysis, whereas the product was compared with a sample of SiC procured from a supplier who manufactures high-purity products through BET analysis. In EDX analysis, approximately 72 pct Si and 28 pct C were identified. The vibrational peaks of the synthesized product (characteristics Si-C bonds) were observed at around 1076 cm-1 (FTIR analysis). At the same time, the outcomes were compared with major publications in the literature.

  20. Direct visualization of photoinduced glassy dynamics on the amorphous silicon carbide surface by STM movies

    Science.gov (United States)

    Nguyen, Duc; Nienhaus, Lea; Haasch, Richard T.; Lyding, Joseph; Gruebele, Martin

    2015-03-01

    Glassy dynamics can be controlled by light irradiation. Sub- and above-bandgap irradiation cause numerous phenomena in glasses including photorelaxation, photoexpansion, photodarkening and pohtoinduced fluidity. We used scanning tunneling microscopy to study surface glassy dynamics of amorphous silicon carbide irradiated with above- bandgap 532 nm light. Surface clusters of ~ 4-5 glass forming unit in diameter hop mostly in a two-state fashion, both without and with irradiation. Upon irradiation, the average surface hopping activity increases by a factor of 3. A very long (~1 day) movie of individual clusters with varying laser power density provides direct evidence for photoinduced enhanced hopping on the glass surfaces. We propose two mechanisms: heating and electronic for the photoenhanced surface dynamics.