WorldWideScience

Sample records for cst microwave studio

  1. Simulation of cold magnetized plasmas with the 3D electromagnetic software CST Microwave Studio®

    Directory of Open Access Journals (Sweden)

    Louche Fabrice

    2017-01-01

    Full Text Available Detailed designs of ICRF antennas were made possible by the development of sophisticated commercial 3D codes like CST Microwave Studio® (MWS. This program allows for very detailed geometries of the radiating structures, but was only considering simple materials like equivalent isotropic dielectrics to simulate the reflection and the refraction of RF waves at the vacuum/plasma interface. The code was nevertheless used intensively, notably for computing the coupling properties of the ITER ICRF antenna. Until recently it was not possible to simulate gyrotropic medias like magnetized plasmas, but recent improvements have allowed programming any material described by a general dielectric or/and diamagnetic tensor. A Visual Basic macro was developed to exploit this feature and was tested for the specific case of a monochromatic plane wave propagating longitudinally with respect to the magnetic field direction. For specific cases the exact solution can be expressed in 1D as the sum of two circularly polarized waves connected by a reflection coefficient that can be analytically computed. Solutions for stratified media can also be derived. This allows for a direct comparison with MWS results. The agreement is excellent but accurate simulations for realistic geometries require large memory resources that could significantly restrict the possibility of simulating cold plasmas to small-scale machines.

  2. Simulation of cold magnetized plasmas with the 3D electromagnetic software CST Microwave Studio®

    Science.gov (United States)

    Louche, Fabrice; Křivská, Alena; Messiaen, André; Wauters, Tom

    2017-10-01

    Detailed designs of ICRF antennas were made possible by the development of sophisticated commercial 3D codes like CST Microwave Studio® (MWS). This program allows for very detailed geometries of the radiating structures, but was only considering simple materials like equivalent isotropic dielectrics to simulate the reflection and the refraction of RF waves at the vacuum/plasma interface. The code was nevertheless used intensively, notably for computing the coupling properties of the ITER ICRF antenna. Until recently it was not possible to simulate gyrotropic medias like magnetized plasmas, but recent improvements have allowed programming any material described by a general dielectric or/and diamagnetic tensor. A Visual Basic macro was developed to exploit this feature and was tested for the specific case of a monochromatic plane wave propagating longitudinally with respect to the magnetic field direction. For specific cases the exact solution can be expressed in 1D as the sum of two circularly polarized waves connected by a reflection coefficient that can be analytically computed. Solutions for stratified media can also be derived. This allows for a direct comparison with MWS results. The agreement is excellent but accurate simulations for realistic geometries require large memory resources that could significantly restrict the possibility of simulating cold plasmas to small-scale machines.

  3. Comparison of Measured and Calculated Coupling between a Waveguide and an RF Cavity Using CST Microwave Studio

    Energy Technology Data Exchange (ETDEWEB)

    J. Shi; H. Chen; S. Zheng; D. Li; R.A. Rimmer; H. Wang

    2006-06-26

    Accurate predications of RF coupling between an RF cavity and ports attached to it have been an important study subject for years for RF coupler and higher order modes (HOM) damping design. We report recent progress and a method on the RF coupling simulations between waveguide ports and RF cavities using CST Microwave Studio in time domain (Transit Solver). Comparisons of the measured and calculated couplings are presented. The simulated couplings and frequencies agree within {approx} 10% and {approx} 0.1% with the measurements, respectively. We have simulated couplings with external Qs ranging from {approx} 100 to {approx} 100,000, and confirmed with measurements. The method should also work well for higher Qs, and can be easily applied in RF power coupler designs and HOM damping for normal-conducting and superconducting cavities.

  4. Comparison of Measured and Calculated Coupling between a Waveguide and an RF Cavity Using CST Microwave Studio

    International Nuclear Information System (INIS)

    J. Shi; H. Chen; S. Zheng; D. Li; R.A. Rimmer; H. Wang

    2006-01-01

    Accurate predications of RF coupling between an RF cavity and ports attached to it have been an important study subject for years for RF coupler and higher order modes (HOM) damping design. We report recent progress and a method on the RF coupling simulations between waveguide ports and RF cavities using CST Microwave Studio in time domain (Transit Solver). Comparisons of the measured and calculated couplings are presented. The simulated couplings and frequencies agree within ∼ 10% and ∼ 0.1% with the measurements, respectively. We have simulated couplings with external Qs ranging from ∼ 100 to ∼ 100,000, and confirmed with measurements. The method should also work well for higher Qs, and can be easily applied in RF power coupler designs and HOM damping for normal-conducting and superconducting cavities

  5. Electron gun simulation with CST PARTICLE STUDIO

    International Nuclear Information System (INIS)

    Spachmann, Holger; Becker, Ulrich

    2006-01-01

    This paper introduces CST PARTICLE STUDIO TM , a specialist tool for the fast and accurate design and analysis of 3D electron guns. The new software is based on the multi-purpose electromagnetic solvers of the CST STUDIO family and incorporates their powerful modelling capabilities as well as successful algorithms of the MAFIA-TS simulators. The underlying theory of the PBA based field solvers and the used tracking technique is presented and some examples of application demonstrate the current status of the software

  6. A Comparison of Three-Dimensional Simulations of Traveling-Wave Tube Cold-Test Characteristics Using CST MICROWAVE STUDIO and MAFIA

    Science.gov (United States)

    Chevalier, C. T.; Herrmann, K. A.; Kory, C. L.; Wilson, J. D.; Cross, A. W.; Williams, W. D. (Technical Monitor)

    2001-01-01

    Previously, it was shown that MAFIA (solutions of Maxwell's equations by the Finite Integration Algorithm), a three-dimensional simulation code, can be used to produce accurate cold-test characteristics including frequency-phase dispersion, interaction impedance, and attenuation for traveling-wave tube (TWT) slow-wave structures. In an effort to improve user-friendliness and simulation time, a model was developed to compute the cold-test parameters using the electromagnetic field simulation software package CST MICROWAVE STUDIO (MWS). Cold-test parameters were calculated for several slow-wave circuits including a ferruled coupled-cavity, a folded waveguide, and a novel finned-ladder circuit using both MWS and MAFIA. Comparisons indicate that MWS provides more accurate cold-test data with significantly reduced simulation times. Both MAFIA and MWS are based on the finite integration (FI) method; however, MWS has several advantages over MAFIA. First, it has a Windows based interface for PC operation, making it very user-friendly, whereas MAFIA is UNIX based. MWS uses a new Perfect Boundary Approximation (PBA), which increases the accuracy of the simulations by avoiding stair step approximations associated with MAFIA's representation of structures. Finally, MWS includes a Visual Basic for Applications (VBA) compatible macro language that enables the simulation process to be automated and allows for the optimization of user-defined goal functions, such as interaction impedance.

  7. Design of 22-way coaxial power combiner for 20 kW solid state amplifier and 6-1/8″ to N type adapter using CST microwave studio

    International Nuclear Information System (INIS)

    Sharma, Sonal; Mishra, J.K.; Ramarao, B.V.; Pande, Manjiri; Bhagwat, P.V.

    2015-01-01

    A 20 kW, 325 MHz solid state amplifier is being developed in BARC for Fermi Lab collaboration. It is proposed to combine 22 RF amplifiers to get output power of 20 kW. For this purpose a 22 way coaxial power combiner has been designed using CST microwave studio. This combiner is based on Wilkinson combining technology. The inner conductor of the combiner is split into 22 equal plates. Each plate has 1-5/8 flange at input port. These plates are connected to a common disc. The combined output is a 3-1/8 flanged port. The return loss obtained at the combined port is better than 28 dB indicating a very good match. The transmission from the combined port to each split port is about -13.5 dB representing a low insertion loss and equal split. The return loss each of the split port is obtained by simultaneous excitation of each port. The return loss at each port is better than 26 dB. Fabrication of the combiner is under process. The material used for inner conductor will be ETP copper and outer conductor will be made of aluminium. Along with the above design a separate design of 6-1/8″ to N type adapter has been completed in CST microwave studio. A number of these adapters will be used for high power waveguide load characterization which is being developed in BARC. The return loss at each port is better than 30 dB and insertion loss is less than 0.05 dB. Fabrication of these adapters is under process. (author)

  8. Coaxial Filters Optimization Using Tuning Space Mapping in CST Studio

    Directory of Open Access Journals (Sweden)

    D. Wolansky

    2011-04-01

    Full Text Available This paper deals with the optimization of coaxial filters using Tuning Space Mapping (TSM method implemented to CST environment. The function of fine and coarse model and their link between each other is explained. In addition, supporting macros programmed in VBA language, which are used for maximum efficiency of the optimization from the user´s point of view, are mentioned. Macros are programmed in CST and are also used for automatic calibration constants determination and for automatic calibration process between the coarse model and the fine model. The whole algorithm is illustrated on the particular seven-order filter design and optimized results are compared to measured ones.

  9. REX-ISOLDE RFQ Beam Dynamics Studies using CST EM Studio

    CERN Document Server

    Fraser, M A

    2014-01-01

    The original CNC milling files used to machine the electrodes of the REX-ISOLDE RFQ were acquired in late 2012 and electrostatic simulations were carried out using CST EM Studio in order to attain a 3D field map of the electric fields in the region around the beam axis. The objective was to construct a beam dynamics simulation tool that frees us from the constraints of the PARMTEQM code, which was used to design the RFQ, and that will afford us more flexibility in the studies needed for pre-bunching into the RFQ with an external multi-harmonic buncher. This note details the geometry of the electrodes and their simulation in CST EM Studio, the implementation of particle tracking in the computed field map using TRACK and benchmarking studies with PARMTEQM v3.09.

  10. Design & simulation of a 800 kV dynamitron accelerator by CST studio

    Directory of Open Access Journals (Sweden)

    A M Aghayan

    2015-09-01

    Full Text Available Nowadays, middle energy electrostatic accelerators in industries are widely used due to their high efficiency and low cost compared with other types of accelerators. In this paper, the importance and applications of electrostatic accelerators with 800 keV energy are studied. Design and simulation of capacitive coupling of a dynamitron accelerator is proposed. Furthermore, accelerating tube are designed and simulated by means of CST Suit Studio

  11. Design and Simulation of a Birdcage Coil using CST Studio Suite for Application at 7T

    International Nuclear Information System (INIS)

    Tomas, Bernat Palau; Li, Houmin; Anjum, M R

    2013-01-01

    This work describes the study of coils for Magnetic Resonance Imaging (MRI) applications. The principal objective is the design of a birdcage Radio Frequency (RF) coil to use in a 7 Tesla (7T) scanner. Higher strength field generates a better SNR and increased chemical shift effect, improving spectral fat suppression and spectroscopy. Moreover, a better SNR increases the spatial resolution or reduces the imaging time. This research work presented recent developments based on high field 7T design using CST studio. The birdcage coil achieves circular polarization and generates a high homogeneous radio frequency magnetic field under many conditions. Design of a Birdcage coil for a 7T to obtain the images from s mall animals (i.e. mouse). It opens the door to design and construct a Birdcage coil for a 7T to obtain human brain images. Firstly we design a birdcage coil then the results are obtained with simulator CST Wave Studio, creating a 3D model and generating a simulation. Finally the parameters are re adjusted to obtain our desired Larmor frequency 298.2 MHz for a correct operation in 7T. This research work demonstrates the theoretical results from our design and shows the designed antenna behavior

  12. Multipacting Simulations of Tuner-adjustable waveguide coupler (TaCo) with CST Particle Studio®

    CERN Document Server

    Shafqat, N; Wegner, R

    2014-01-01

    Tuner-adjustable waveguide couplers (TaCo) are used to feed microwave power to different RF structures of LINAC4. This paper studies the multipacting phenomenon for TaCo using the PIC solver of CST PS. Simulations are performed for complete field sweeps and results are analysed.

  13. Simulation Results for the New NSTX HHFW Antenna Straps Design by Using Microwave Studio

    International Nuclear Information System (INIS)

    Kung, C.C.; Ellis, R.; Brunkhorst, C.; Greenough, N.; Fredd, E.; Castano, A.; Miller, D.; D'Amico, G.; Yager, R.; Hosea, J.; Wilson, J.R.; Ryan, P.

    2009-01-01

    Experimental results have shown that the high harmonic fast wave (HHFW) at 30 MHz can provide substantial plasma heating and current drive for the NSTX spherical tokamak operation. However, the present antenna strap design rarely achieves the design goal of delivering the full transmitter capability of 6 MW to the plasma. In order to deliver more power to the plasma, a new antenna strap design and the associated coaxial line feeds are being constructed. This new antenna strap design features two feedthroughs to replace the old single feed-through design. In the design process, CST Microwave Studio has been used to simulate the entire new antenna strap structure including the enclosure and the Faraday shield. In this paper, the antenna strap model and the simulation results will be discussed in detail. The test results from the new antenna straps with their associated resonant loops will be presented as well

  14. A calculation method for RF couplers design based on numerical simulation by microwave studio

    International Nuclear Information System (INIS)

    Wang Rong; Pei Yuanji; Jin Kai

    2006-01-01

    A numerical simulation method for coupler design is proposed. It is based on the matching procedure for the 2π/3 structure given by Dr. R.L. Kyhl. Microwave Studio EigenMode Solver is used for such numerical simulation. the simulation for a coupler has been finished with this method and the simulation data are compared with experimental measurements. The results show that this numerical simulation method is feasible for coupler design. (authors)

  15. Development of accurate UWB dielectric properties dispersion at CST simulation tool for modeling microwave interactions with numerical breast phantoms

    International Nuclear Information System (INIS)

    Maher, A.; Quboa, K. M.

    2011-01-01

    In this paper, a reformulation for the recently published dielectric properties dispersion models of the breast tissues is carried out to be used by CST simulation tool. The reformulation includes tabulation of the real and imaginary parts versus frequency on ultra-wideband (UWB) for these models by MATLAB programs. The tables are imported and fitted by CST simulation tool to second or first order general equations. The results have shown good agreement between the original and the imported data. The MATLAB programs written in MATLAB code are included in the appendix.

  16. Time domain SAR raw data simulation using CST and image focusing of 3D objects

    Science.gov (United States)

    Saeed, Adnan; Hellwich, Olaf

    2017-10-01

    This paper presents the use of a general purpose electromagnetic simulator, CST, to simulate realistic synthetic aperture radar (SAR) raw data of three-dimensional objects. Raw data is later focused in MATLAB using range-doppler algorithm. Within CST Microwave Studio a replica of TerraSAR-X chirp signal is incident upon a modeled Corner Reflector (CR) whose design and material properties are identical to that of the real one. Defining mesh and other appropriate settings reflected wave is measured at several distant points within a line parallel to the viewing direction. This is analogous to an array antenna and is synthesized to create a long aperture for SAR processing. The time domain solver in CST is based on the solution of differential form of Maxwells equations. Exported data from CST is arranged into a 2-d matrix of axis range and azimuth. Hilbert transform is applied to convert the real signal to complex data with phase information. Range compression, range cell migration correction (RCMC), and azimuth compression are applied in time domain to obtain the final SAR image. This simulation can provide valuable information to clarify which real world objects cause images suitable for high accuracy identification in the SAR images.

  17. Specific Electromagnetic Effects of Microwave Radiation on Escherichia coli▿

    OpenAIRE

    Shamis, Yury; Taube, Alex; Mitik-Dineva, Natasa; Croft, Rodney; Crawford, Russell J.; Ivanova, Elena P.

    2011-01-01

    The present study investigated the effects of microwave (MW) radiation applied under a sublethal temperature on Escherichia coli. The experiments were conducted at a frequency of 18 GHz and at a temperature below 40°C to avoid the thermal degradation of bacterial cells during exposure. The absorbed power was calculated to be 1,500 kW/m3, and the electric field was determined to be 300 V/m. Both values were theoretically confirmed using CST Microwave Studio 3D Electromagnetic Simulation Softwa...

  18. Design of a New ENG Metamaterial for S-Band Microwave Applications

    Directory of Open Access Journals (Sweden)

    ISLAM Sikder Sunbeam

    2014-10-01

    Full Text Available In this paper we propose a new metamaterial unit cell structure on FR-4 substrate material that shows resonance in the microwave S-Band frequency range and also shows negative permittivity at that frequency. The material shows better performances with two resonances and Double Negative characteristics if Rogers RT 6010 substrate material is used. In this design two separate split ring resonators is used. We have used the CST Microwave Studio simulation software to get the reflection and transmission parameters for this unit cell.

  19. Landscape Studio

    DEFF Research Database (Denmark)

    Hansen, Peter Lundsgaard

    2017-01-01

    Landscape studio documents is the biography of the method 'design conversation' and contributes to the way we work with landscapes. The blog communicates renewed landscape didactics and leads to the innovation of design practices.......Landscape studio documents is the biography of the method 'design conversation' and contributes to the way we work with landscapes. The blog communicates renewed landscape didactics and leads to the innovation of design practices....

  20. Studio CONTEXT at Studio Mumbai

    DEFF Research Database (Denmark)

    Hilberth, Thomas Roger

    2017-01-01

    of resources, and relying on local Indian people and materials. The method was an exercise in mutual learning, and reflected on the intensive connection with local user groups, craftsmen, and architects in a foreign context. The second phase built on top of phase one. Through a study trip through parts...... of India and empirical fieldwork on site, the students adjusted their preliminary work and their long distance research to the actual conditions. Mutual learning with local inhabitants, craftsmen, and professionals influenced the outcome and quality of their design proposals. The working environment......Studio CONTEXT @ STUDIO MUMBAI Studio CONTEXT deals with a sustainable architecture based on complexity on all scales of a specific context, that involves geographical, historical, anthropological and social reflections, a cross cultural involvement and mutual learning as well as investigations...

  1. Studio CONTEXT

    DEFF Research Database (Denmark)

    Hilberth, Thomas Roger

    2015-01-01

    well-known architectural office Studio Mumbai near Bombay, where we on close hold experienced the meticulous working method of Bijoy Jain including his extensive care for details up to the scale 1:1. Inspired by this and India’s rich culture, the hospitality of her peoples and the enormous challenges...

  2. Studio CONTEXT

    DEFF Research Database (Denmark)

    Hilberth, Thomas Roger

    2015-01-01

    showcase how to build a sustainable, environment friendly sanitation facility even in remote areas. 18 students from Aarhus School of Architecture and their Indian counterparts together with local craftsmen erected the bamboo and brick structure within 5 weeks time. Previously, planning, design...... determined the design of the facility. The program included an exhibition/education space for teenagers to receive an alternative schooling in farming. Farm products could be exhibited and a shaded space could shelter various activities. An additional combusting toilet was part of the program and should...... of Vijaykumar Sengottuvelan. They suggested an organisation and site on a nearby farm for agricultural education. At the same time we teamed up with Korean architects Byong Cho and Sara Kim who actively followed the design and construction process of studio CONTEXT. Climatic and social sustainable aspects...

  3. Studio CONTEXT at Studio Mumbai

    DEFF Research Database (Denmark)

    Hilberth, Thomas Roger

    2017-01-01

    , which developed from teamwork, preparation, study trip, field studies, 1:1 material investigations and local cultural studies to studio work with theory and scale experiments. The curriculum consisted of different phases: preparation, preliminary project, theory, study trip, site/project, and project......, reflection board, red books and pair teamwork. Also a written reflection curricula was a minor part of the total rating. It was also considered on which level the student could synthesize existing information into new and contemporary architectural projects and knowledge based on the tradition and on human...... needs. The quality with which the architectural idea was expressed through different medias was another important focus point for the ratings of the presented projects....

  4. Discovering the Business Studio

    DEFF Research Database (Denmark)

    Barry, Daved; Meisiek, Stefan

    2015-01-01

    considerably in form, ranging from temporary “pop up” studios to dedicated facilities with full-time staff, with the primary purpose of educating managers in craft, art, and design-based approaches to business problems. The jury on the studio phenomenon is out—can they deliver on their educational promise...... the value that studios might have for management education, provide examples of four different business studio orientations and how these might translate into practice, and highlight what we believe to be some essentials when starting and running a business studio.......Over the past decade, numerous business schools have begun experimenting with studio-based inquiry, often drawing inspiration from professional studios used within art and design schools and from business and governmental studios used for problem-solving and innovation. Business school studios vary...

  5. Multipacting Simulations of Tuner-adjustable waveguide coupler (TaCo) with CST

    CERN Document Server

    Shafqat, Nuaman; Wegner, Rolf

    2015-01-01

    Tuner-adjustable waveguide couplers (TaCo) are used to feed microwave power to different RF structures of LINAC4. This paper studies the multipacting phenomenon for TaCo using PIC solver of CST PS. Simulations are performed for complete field sweeps and results are analysed.

  6. Investigation of a metallic photonic crystal high power microwave mode converter

    Directory of Open Access Journals (Sweden)

    Dong Wang

    2015-02-01

    Full Text Available It is demonstrated that an L band metallic photonic crystal TEM-TE11 mode converter is suitable for narrow band high power microwave application. The proposed mode converter is realized by partially filling metallic photonic crystals along azimuthal direction in a coaxial transmission line for phase-shifting. A three rows structure is designed and simulated by commercial software CST Microwave Studio. Simulation results show that its conversion efficiency is 99% at the center frequency 1.58 GHz. Over the frequency range of 1.56-1.625 GHz, the conversion efficiency exceeds 90 %, with a corresponding bandwidth of 4.1 %. This mode converter has a gigawatt level power handling capability which is suitable for narrow band high power microwave application. Using magnetically insulated transmission line oscillator(MILO as a high power microwave source, particle-in-cell simulation is carried out to test the performance of the mode converter. The expected TE11 mode microwave output is obtained and the MILO works well. Mode conversion performance of the converter is tested by far-field measurement method. And the experimental result confirms the validity of our design. Then, high power microwave experiment is carried out on a Marx-driven Blumlein water line pulsed power accelerator. Microwave frequency, radiated pattern and power are measured in the far-field region and the results agree well with simulation results. The experiment also reveals that no microwave breakdown or pulse shortening took place in the experimental setup.

  7. Professional Visual Studio 2010

    CERN Document Server

    Randolph, Nick; Anderson, Chris

    2010-01-01

    A must-have guide that covers all the new features of Visual Studio 2010. Visual Studio allows you to create and manage programming projects for the Windows platform, and the new 2010 version has undergone a major overhaul comprised of significant changes. Written by an author team of veteran programmers and developers, Professional Visual Studio 2010 gets you quickly up to speed on what you can expect from the newest version of Visual Studio. This book's first section is dedicated to familiarizing you with the core aspects of Visual Studio 2010. Everything you need is contained in the first f

  8. Learning Anime Studio

    CERN Document Server

    Troftgruben, Chad

    2014-01-01

    Anime Studio is your complete animation program to help you create 2D movies, cartoons, anime, and cut out animations. You can create your own animated shorts and use Anime Studio to produce cartoon animations for film, video, or streaming over the Web, which can be enjoyed on YouTube, Vimeo, and other popular sites. Anime Studio is great for hobbyists and professionals alike, combining tools for both illustration and animation. With Anime Studio's easy-to-use interface, you will be creating an animated masterpiece in no time. This practical, step-by-step guide will provide you with a structur

  9. Studio 1:1

    Index Scriptorium Estoniae

    2011-01-01

    Projekteerimis- ja disainistuudiost STUDIO 1:1 (Eindhoven), mis tegeleb avaliku ruumi loomise ja selle kasutamise kujundamisega. Projektidest "Linnulinn - linn lindude segakogukonna jaoks" ja ICT kogemuskeskus "De Verdieping"

  10. Study of microwave components for an electron cyclotron resonance ...

    Indian Academy of Sciences (India)

    The system consists of a microwave source, an isolator, a directional coupler, a threestub tuner, a high voltage break, a microwave vacuum window, and a microwave launcher. These microwave components were simulated using microwave studio software. The low power and full term characterization of the microwave ...

  11. Correction magnetic field in electromagnet of proton accelerator using CST software; Correcao do campo magnetico em um eletroima de um acelerador de protons usando o software CST

    Energy Technology Data Exchange (ETDEWEB)

    Rabelo, L.A.; Campos, T.P.R., E-mail: luisarabelo88@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte (Brazil). Dept. de Engenharia Nuclear

    2016-07-01

    The aim of this paper is to present the study and simulation of uniform magnetic field electromagnets new circular accelerator model for protons with energy range between 15 MeV and 64 MeV. In addition, investigating materials and the changes induced by the presence of 'gaps' synchronism correction. The electromagnet simulations, predefined, were made in electromagnetic field simulation software CST EM Studio® 3D 2015. The results showed an even distribution of the magnetic field in the compact electromagnet with the same homogenization structures. The results showed regular distribution of the magnetic field in the compact electromagnet with homogenization structures. In conclusion, the electromagnetic model proposed shown to be feasible for a circular accelerator and comply the synchronization requirements. (author)

  12. Android Studio application development

    CERN Document Server

    Zapata, Belén Cruz

    2013-01-01

    A practical guide, which will show you how to create Android applications using the new Google official IDE, Android Studio.If you are a developer who wants to learn the key features of Android Studio, and learn how to create their first app, this book is ideal for you! Developers interested in this book should be familiar with the object- oriented programming paradigm, and the Java programming language. It is also recommended that you understand the main characteristics of the Android mobile system.

  13. Android studio essentials

    CERN Document Server

    Zapata, Belén Cruz

    2015-01-01

    This book is intended for developers who are interested in getting acquainted with the concepts of Android Studio in a very short span of time. It is assumed that you are familiar with the OOPS paradigm and Java. It is also recommendable to have prior knowledge of the main characteristics of the Android mobile system.

  14. Urbanism Studio 2014

    DEFF Research Database (Denmark)

    This catalogue showcases the master Urbanism Studio results 2014, which have been developed utilising research on station cities completed by Centre for Strategic Urban Research. Together with the Ministry of Housing, Urban and Rural Affairs (MHURA), UC wished to explore development potentials...... for the two station cities of Ørbæk (Funen) and Hurup (Thy) in a strategic urban design project. The catalogue contains a total of eighteen proposals, nine for each city, addressing different types of interventions, covering various scales, typologies and themes including: from landscape to city, from parking...

  15. uVis Studio

    DEFF Research Database (Denmark)

    Pantazos, Kostas; Kuhail, Mohammad Amin; Lauesen, Søren

    2013-01-01

    developers to interact and view the visualization from the end-user's perspective without switching workspace, and Auto-Completion; a feature of the Property Grid that provides suggestions not only for the formula language syntax but also for the tables, the table elds and the relationships in the database....... We conducted a usability study with six developers to evaluate if the Studio and its features enhance cognition and facilitate the visualization development. The results show that developers appreciated the Drag-Drop-Set- View-Interact approach, the What-You-Bind-Is-What-You-Get, the Auto...

  16. Java Analysis Studio

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Anthony S

    1998-10-23

    Java Analysis Studio is a desktop data analysis application aimed primarily at offline analysis of high-energy physics data. The goal is to make the application independent of any particular data format, so that it can be used to analyze data from any experiment. The application features a rich graphical user interface (GUI) aimed at making the program easy to learn and use, but which at the same time allows the user to perform arbitrarily complex data analysis tasks by writing analysis modules in Java. The application can be used either as a standalone application, or as a client for a remote Java Data Server. The client-server mechanism is targeted particularly at allowing remote users to access large data samples stored on a central data center in a natural and efficient way.

  17. NASA's Scientific Visualization Studio

    Science.gov (United States)

    Mitchell, Horace G.

    2003-01-01

    Since 1988, the Scientific Visualization Studio(SVS) at NASA Goddard Space Flight Center has produced scientific visualizations of NASA s scientific research and remote sensing data for public outreach. These visualizations take the form of images, animations, and end-to-end systems and have been used in many venues: from the network news to science programs such as NOVA, from museum exhibits at the Smithsonian to White House briefings. This presentation will give an overview of the major activities and accomplishments of the SVS, and some of the most interesting projects and systems developed at the SVS will be described. Particular emphasis will be given to the practices and procedures by which the SVS creates visualizations, from the hardware and software used to the structures and collaborations by which products are designed, developed, and delivered to customers. The web-based archival and delivery system for SVS visualizations at svs.gsfc.nasa.gov will also be described.

  18. In Studio Vinum / Lylian Meister

    Index Scriptorium Estoniae

    Meister, Lylian, 1966-

    2007-01-01

    Vinoteek ja keldrirestoran In Studio Vinum Tallinnas Suur-Karja tänavas. Sisekujunduse autor sisearhitekt Marit Murd. Sommeljee Imre Uussaare disainitud on vinoteegi seinu kattev veiniriiulite süsteem. 4 värv. vaadet

  19. Fatti dello Studio Bentivoglio

    Directory of Open Access Journals (Sweden)

    Pasquale Fameli

    2015-12-01

    Full Text Available In the late sixties a group of artists formed in Palazzo Bentivoglio in Bologna joined to new conceptual-behavioral frontiers, in turn summarized under the partial labels Antiform, Arte Povera and Body Art. The situation in Bologna takes on connotations entirely singular, mainly for having found its wellspring in Vasco Bendini, from Informal movement, who became brilliant forerunner of many of the most advanced solutions and features of the new art season. For a few but intense years Studio Bentivoglio becomes therefore the heart of the new fertile aesthetic research, counting among its leaders now prominent personalities such as Pier Paolo Calzolari and Luigi Ontani. The essay will reconstruct the events of those years in Bologna through the works and documents remained of, placing comparisons with the contemporary proposals, and referring not only to the poetics of various artists, but also to the critical voices – not least that of Francesco Arcangeli – who, with insight and boldness, were able to understand and comment on the changes of expression then in place.

  20. Heat Transfer Analysis for a Fixed CST Column

    International Nuclear Information System (INIS)

    Lee, S.Y.

    2004-01-01

    In support of a small column ion exchange (SCIX) process for the Savannah River Site waste processing program, a transient two-dimensional heat transfer model that includes the conduction process neglecting the convection cooling mechanism inside the crystalline silicotitanate (CST) column has been constructed and heat transfer calculations made for the present design configurations. For this situation, a no process flow condition through the column was assumed as one of the reference conditions for the simulation of a loss-of-flow accident. A series of the modeling calculations has been performed using a computational heat transfer approach. Results for the baseline model indicate that transit times to reach 130 degrees Celsius maximum temperature of the CST-salt solution column are about 96 hours when the 20-in CST column with 300 Ci/liter heat generation source and 25 degrees Celsius initial column temperature is cooled by natural convection of external air as a primary heat transfer mechanism. The modeling results for the 28-in column equipped with water jacket systems on the external wall surface of the column and water coolant pipe at the center of the CST column demonstrate that the column loaded with 300 Ci/liter heat source can be maintained non-boiling indefinitely. Sensitivity calculations for several alternate column sizes, heat loads of the packed column, engineered cooling systems, and various ambient conditions at the exterior wall of the column have been performed under the reference conditions of the CST-salt solution to assess the impact of those parameters on the peak temperatures of the packed column for a given transient time. The results indicate that a water-coolant pipe at the center of the CST column filled with salt solution is the most effective one among the potential design parameters related to the thermal energy dissipation of decay heat load. It is noted that the cooling mechanism at the wall boundary of the column has significant

  1. MEMS Keys as a Way to Delay the Phase of the Microwave Range

    Directory of Open Access Journals (Sweden)

    Anton Antonenko

    2015-04-01

    Full Text Available The paper deals with a new type of phase shifter antennas scanned beam shows the principle of constructing controlled microwave phase shifters that have a low cost. Also, given the results of a theoretical study of the main characteristics of dependency - controlled phase shift and frequency band working on the design parameters and then refined by calculating finite element program CST Microwave Studio. These inexpensive scanned antenna can be used in radar centimeter and millimeter wavelengths in the frequency range 2 ¸ 30 GHz. The results of calculation of capacitive and inductive coupling during switching detector elements and the simulation results of the phase shift in passing through the phase shifter television signal containing includes microelectromechanical systems - manageable sections that have to change the direction of polarization of the signal. Thus for supplying voltage-controlled permanent magnet field is used. According to the simulation results, which are presented in the conclusions can be drawn about the development of the design of optimal geometric parameters, the values obtained for the results of the optimization modeling. However revealed a high quality factor switching phase.

  2. NASA CST aids U.S. industry. [computational structures technology

    Science.gov (United States)

    Housner, Jerry M.; Pinson, Larry D.

    1993-01-01

    The effect of NASA's computational structures Technology (CST) research on aerospace vehicle design and operation is discussed. The application of this research to proposed version of a high-speed civil transport, to composite structures in aerospace, to the study of crack growth, and to resolving field problems is addressed.

  3. CST receiver tube qualification, Phase 1, Investigation - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Mack, I.; Rossy, J.-P.

    2010-05-15

    In this report the different application possibilities for concentrated solar thermal (CST) systems are studied. Further, the possible measuring methods for characterising and qualifying the receivers with their embedded absorber tubes are investigated. The investigations show that CST systems can be used as an environmentally friendly alternative to fossil fuels in many applications. The best known one is the generation of electrical power, but concentrated solar energy can also be used for desalination, industrial process heat, and for cooling of buildings. Industrial process heat is a large potential area with temperature in the range of 120 {sup o}C to over 400 {sup o}C. Heat below 400 {sup o}C can be provided by various parabolic trough and Fresnel systems, which are optimised for the temperature required. In order to further increase the usage of CST systems, it is of great importance to provide standards for the qualification and characterisation of the different components of the CST systems. Huge efforts are currently made to define a standard for evacuated receiver tubes. For the characterisation of the black absorber tubes the development is still at the beginning, although the need here is also given. (authors)

  4. Testing and securing Android Studio applications

    CERN Document Server

    Zapata, Belén Cruz

    2014-01-01

    If you are a developer with some Android knowledge, but you do not know how to test your applications using Android Studio, this book will guide you. It is recommended that you are familiar with Android Studio IDE.

  5. Manga studio 5 beginner's guide

    CERN Document Server

    Rhodes, Richard

    2014-01-01

    Using a step-by-step approach, this book will lead you through the process of building up complex, multi-page comic/Manga art, along with industry insights along the way. ""Manga Studio Beginner's Guide"" is for beginners in comic creation. The more you know about how comics are made, the better you will be, but it's not essential to get the most out of this book. Even if you're a professional comic artist, this book will get you up to speed on using Manga Studio 5.

  6. Perancangan Media Promosi Fitra Tattoo Studio Surabaya

    OpenAIRE

    Nursalim, Ekky; Damajanti, Maria Nala; Yuwono, Elisabeth Christine

    2015-01-01

    Fitra Tattoo Studio merupakan salah satu tattoo artist yang berada di kota Surabaya. Namun, karena kurangnya promosi yang dilakukan oleh Fitra Tattoo Studio sejak awal menyebabkan Fitra Tattoo Studio kurang dikenal oleh masyarakat Surabaya sendiri. Oleh karena itu, untuk menjangkau sasaran konsumen dan mengenalkan Fitra Tattoo Studio di benak konsumen dibutuhkan sebuah perancangan promosi yang efektif, komunikatif, dan efisien untuk menyampaikan pesan kepada sasaran konsumen. Dengan adanya pe...

  7. Reporting with Visual Studio and Crystal Reports

    CERN Document Server

    Elkoush, Mahmoud

    2013-01-01

    A fast-paced, example-based guide to learn how to create a reporting application using Visual Studio and Crystal Reports.""Reporting with Visual Studio and Crystal Reports"" is for developers new to Crystal Reports. It will also prove useful to intermediate users who wish to explore some new techniques in Crystal Reports using Microsoft Visual Studio. Readers are expected to have basic knowledge of C#, Microsoft Visual Studio, and Structured Query Language (SQL).

  8. Studios Abroad: A Challenge in Innovative Pedagogy

    Science.gov (United States)

    Macedo, Joseli

    2017-01-01

    Study abroad programs offer a unique opportunity to evaluate pedagogic models. The role of studios in design and planning pedagogy has been examined. However, how the general framework of a studio supports other pedagogic models has not been widely discussed. This article assesses a series of urban planning and design studios conducted abroad to…

  9. Python tools for Visual Studio

    CERN Document Server

    Wang, Cathy

    2014-01-01

    This is a hands-on guide that provides exemplary coverage of all the features and concepts related to PTVS.The book is intended for developers who are aiming to enhance their productivity in Python projects with automation tools that Visual Studio provides for the .Net community. Some basic knowledge of Python programming is essential.

  10. Learning software testing with Test Studio

    CERN Document Server

    Madi, Rawane

    2013-01-01

    Learning Software Testing with Test Studio is a practical, hands-on guide that will help you get started with Test Studio to design your automated solution and tests. All through the book, there are best practices and tips and tricks inside Test Studio which can be employed to improve your solution just like an experienced QA.If you are a beginner or a professional QA who is seeking a fast, clear, and direct to the point start in automated software testing inside Test Studio, this book is for you. You should be familiar with the .NET framework, mainly Visual Studio, C#, and SQL, as the book's

  11. Specific electromagnetic effects of microwave radiation on Escherichia coli.

    Science.gov (United States)

    Shamis, Yury; Taube, Alex; Mitik-Dineva, Natasa; Croft, Rodney; Crawford, Russell J; Ivanova, Elena P

    2011-05-01

    The present study investigated the effects of microwave (MW) radiation applied under a sublethal temperature on Escherichia coli. The experiments were conducted at a frequency of 18 GHz and at a temperature below 40°C to avoid the thermal degradation of bacterial cells during exposure. The absorbed power was calculated to be 1,500 kW/m(3), and the electric field was determined to be 300 V/m. Both values were theoretically confirmed using CST Microwave Studio 3D Electromagnetic Simulation Software. As a negative control, E. coli cells were also thermally heated to temperatures up to 40°C using Peltier plate heating. Scanning electron microscopy (SEM) analysis performed immediately after MW exposure revealed that the E. coli cells exhibited a cell morphology significantly different from that of the negative controls. This MW effect, however, appeared to be temporary, as following a further 10-min elapsed period, the cell morphology appeared to revert to a state that was identical to that of the untreated controls. Confocal laser scanning microscopy (CLSM) revealed that fluorescein isothiocyanate (FITC)-conjugated dextran (150 kDa) was taken up by the MW-treated cells, suggesting that pores had formed within the cell membrane. Cell viability experiments revealed that the MW treatment was not bactericidal, since 88% of the cells were recovered after radiation. It is proposed that one of the effects of exposing E. coli cells to MW radiation under sublethal temperature conditions is that the cell surface undergoes a modification that is electrokinetic in nature, resulting in a reversible MW-induced poration of the cell membrane.

  12. Specific Electromagnetic Effects of Microwave Radiation on Escherichia coli▿

    Science.gov (United States)

    Shamis, Yury; Taube, Alex; Mitik-Dineva, Natasa; Croft, Rodney; Crawford, Russell J.; Ivanova, Elena P.

    2011-01-01

    The present study investigated the effects of microwave (MW) radiation applied under a sublethal temperature on Escherichia coli. The experiments were conducted at a frequency of 18 GHz and at a temperature below 40°C to avoid the thermal degradation of bacterial cells during exposure. The absorbed power was calculated to be 1,500 kW/m3, and the electric field was determined to be 300 V/m. Both values were theoretically confirmed using CST Microwave Studio 3D Electromagnetic Simulation Software. As a negative control, E. coli cells were also thermally heated to temperatures up to 40°C using Peltier plate heating. Scanning electron microscopy (SEM) analysis performed immediately after MW exposure revealed that the E. coli cells exhibited a cell morphology significantly different from that of the negative controls. This MW effect, however, appeared to be temporary, as following a further 10-min elapsed period, the cell morphology appeared to revert to a state that was identical to that of the untreated controls. Confocal laser scanning microscopy (CLSM) revealed that fluorescein isothiocyanate (FITC)-conjugated dextran (150 kDa) was taken up by the MW-treated cells, suggesting that pores had formed within the cell membrane. Cell viability experiments revealed that the MW treatment was not bactericidal, since 88% of the cells were recovered after radiation. It is proposed that one of the effects of exposing E. coli cells to MW radiation under sublethal temperature conditions is that the cell surface undergoes a modification that is electrokinetic in nature, resulting in a reversible MW-induced poration of the cell membrane. PMID:21378041

  13. Reconstitution of the CstF complex unveils a regulatory role for CstF-50 in recognition of 3'-end processing signals.

    Science.gov (United States)

    Yang, Wen; Hsu, Peter L; Yang, Fan; Song, Jae-Eun; Varani, Gabriele

    2018-01-25

    Cleavage stimulation factor (CstF) is a highly conserved protein complex composed of three subunits that recognizes G/U-rich sequences downstream of the polyadenylation signal of eukaryotic mRNAs. While CstF has been identified over 25 years ago, the architecture and contribution of each subunit to RNA recognition have not been fully understood. In this study, we provide a structural basis for the recruitment of CstF-50 to CstF via interaction with CstF-77 and establish that the hexameric assembly of CstF creates a high affinity platform to target various G/U-rich sequences. We further demonstrate that CstF-77 boosts the affinity of the CstF-64 RRM to the RNA targets and CstF-50 fine tunes the ability of the complex to recognize G/U sequences of certain lengths and content. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  14. Mixxing Audio Menggunakan FL Studio

    OpenAIRE

    Prawira, Yanheri

    2011-01-01

    Kajian ini bertujuan untuk memudahkan proses mixing audio dan menghemat biaya dalam proses Mixxing audio hanya menggunakan sebuah laptop ataupun komputer sebagai media utama yang menggunakan OS Windows 7, dan menggunakan aplikasi yang mencakup : FL Studio 9, ASIO 4 ALL tanpa tambahan alat apapun. Tujuan dari pembuatan system ini berguna untuk mempermudah proses mixxing audio DJ dengan menggunakan media laptop ataupun komputer, tanpa mengeluarkan banyak biaya. 082406014

  15. MANAJEMEN PENGAJARAN DI STUDIO DISAIN ARSITEKTUR

    Directory of Open Access Journals (Sweden)

    Istiawati Kiswandono

    2002-01-01

    Full Text Available Design activities in a studio do not only involve students, but also need to be accompanied by tutors, guest lecturers, consumers, and the professionals. Each of these individuals gives different contribution according to each own competency. The involvement that takes place between these individuals does not only consist of tutorials, and is not just an activity in which "the student asks and the tutor answers". The involvement consists of various programs, which must be arranged and coordinated inside a tight schedule. This wrong image of studio instruction has been prevalent, and this seems to be caused by the practice of tutors of treating their students not as students whom they are educating and instructing, but more as junior designers who are working in a design project. The activities of the students and tutors in the studio then are just training and not teaching while in reality both of them are absolutely necessary in studio instruction. Abstract in Bahasa Indonesia : Aktivitas kerja desain di sebuah studio jurusan aritektur melibatkan tidak hanya mahasiswa, tetapi membutuhkan kehadiran pembimbing, dosen tamu, calon pengguna, dan professional (baca: praktisi. Setiap individu yang terlibat mempunyai peran yang berbeda-beda sesuai kompetensinya, sedangkan keterlibatan antar individu tidak sekedar dilakukan dengan cara asistensi. Aktivitas di studio bukanlah sekedar aktivitas "mahasiswa bertanya dan pembimbing menjawab", melainkan terdiri dari bermacam-macam program aktivitas yang harus didisain dengan penjadwalan waktu yang ketat. Image belajar di studio selama ini lebih pada kebiasaan pembimbing memperlakukan mahasiswa bukan sebagai anak didiknya, tetapi sebagai junior arhitect dalam menyelesaikan desain sebuah proyek. Aktivitas yang dilakukan oleh mahasiswa dan pembimbing di studio hanyalah sekedar pelatihan (training dan bukan pengajaran (teaching, padahal kedua-duanya mutlak diperlukan dan diwadahi pada sebuah studio desain. Kata

  16. Detection of napropamide by microwave resonator sensor using carbon nanotube – polypyrrole- chitosan layer

    Directory of Open Access Journals (Sweden)

    Ahmad Mohammadi

    2017-10-01

    Full Text Available This paper presents the design and fabrication of proximity coupled feed disk resonator coated with Multi Walled Carbon Nanotubes (MWCNTs and Polypyrrole-Chitosan (PPy-CHI layers as a napropamide sensor. Computer Simulation Technology (CST microwave studio was used to obtain the best design of disk resonator and feed line position in 5 GHz resonant frequency. Also, MWCNTs - PPy-CHI layers were coated on the disk resonator using electric field deposition and chemical interaction between sensing layer and napropamide was investigated by Fourier Transform Infrared Spectroscopy (FT-IR. The evaluation of the system was performed using different concentrations of commercial napropamide and pure napropamide at room temperature (25 0C. Experimental results prove that proximity coupled feed disk resonator coated with MWCNTs-PPy-CHI layers is a simple, fast (Measurement- time=5 seconds, accurate (as low as 0.1 ppm, low cost and it has the potential of fabrication as a portable instrumentation system for detecting pesticides in water and soil.

  17. Differential involvement of corticospinal tract (CST fibers in UMN-predominant ALS patients with or without CST hyperintensity: A diffusion tensor tractography study

    Directory of Open Access Journals (Sweden)

    Venkateswaran Rajagopalan

    2017-01-01

    DTT revealed subcortical loss ('truncation' of virtual motor CST fibers (presumably projecting from the precentral gyrus (PrG in ALS patients but not in controls; in contrast, virtual fibers (presumably projecting to the adjacent postcentral gyrus (PoG were spared. No significant differences in virtual CST fiber length were observed between controls and ALS patients. However, the frequency of CST truncation was significantly higher in the ALS-CST+ subgroup (9 of 21 than in the ALS-CST− subgroup (4 of 24; p = 0.049, suggesting this finding could differentiate these ALS subgroups. Also, because virtual CST truncation occurred only in the ALS patient group and not in the control group (p = 0.018, this DTT finding could prove to be a diagnostic biomarker of ALS. Significantly shorter disease duration and faster disease progression rate were observed in ALS patients with CST fiber truncation than in those without (p  0.05 in any of the ROIs. In addition, comparing FA values between ALS patients with CST truncation and those without in the aforementioned four ROIs, revealed no significant differences in either hemisphere. However, visual evaluation of DTT was able to identify UMN degeneration in patients with ALS, particularly in those with a more aggressive clinical disease course and possibly different pathologic processes.

  18. A Learning Studio That Inspires Active Pedagogy

    Science.gov (United States)

    Wanless, Linda

    2016-01-01

    For this case study, the author describes the successful collaboration between Michigan Technological University and Herman Miller in the creation of a learning studio within an emerging learning commons. This recently opened learning studio provides faculty and students a place to develop their level of understanding in active teaching and…

  19. HEAT TRANSFER ANALYSIS FOR FIXED CST AND RF COLUMNS

    International Nuclear Information System (INIS)

    Lee, S

    2007-01-01

    In support of a small column ion exchange (SCIX) process for the Savannah River Site waste processing program, transient and steady state two-dimensional heat transfer models have been constructed for columns loaded with cesium-saturated crystalline silicotitanate (CST) or spherical Resorcinol-Formaldehyde (RF) beads and 6 molar sodium tank waste supernate. Radiolytic decay of sorbed cesium results in heat generation within the columns. The models consider conductive heat transfer only with no convective cooling and no process flow within the columns (assumed column geometry: 27.375 in ID with a 6.625 in OD center-line cooling pipe). Heat transfer at the column walls was assumed to occur by natural convection cooling with 35 C air. A number of modeling calculations were performed using this computational heat transfer approach. Minimal additional calculations were also conducted to predict temperature increases expected for salt solution processed through columns of various heights at the slowest expected operational flow rate of 5 gpm. Results for the bounding model with no process flow and no active cooling indicate that the time required to reach the boiling point of ∼130 C for a CST-salt solution mixture containing 257 Ci/liter of Cs-137 heat source (maximum expected loading for SCIX applications) at 35 C initial temperature is about 6 days. Modeling results for a column actively cooled with external wall jackets and the internal coolant pipe (inlet coolant water temperature: 25 C) indicate that the CST column can be maintained non-boiling under these conditions indefinitely. The results also show that the maximum temperature of an RF-salt solution column containing 133 Ci/liter of Cs-137 (maximum expected loading) will never reach boiling under any conditions (maximum predicted temperature without cooling: 88 C). The results indicate that a 6-in cooling pipe at the center of the column provides the most effective cooling mechanism for reducing the maximum

  20. HEAT TRANSFER ANALYSIS FOR FIXED CST AND RF COLUMNS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S

    2007-10-17

    In support of a small column ion exchange (SCIX) process for the Savannah River Site waste processing program, transient and steady state two-dimensional heat transfer models have been constructed for columns loaded with cesium-saturated crystalline silicotitanate (CST) or spherical Resorcinol-Formaldehyde (RF) beads and 6 molar sodium tank waste supernate. Radiolytic decay of sorbed cesium results in heat generation within the columns. The models consider conductive heat transfer only with no convective cooling and no process flow within the columns (assumed column geometry: 27.375 in ID with a 6.625 in OD center-line cooling pipe). Heat transfer at the column walls was assumed to occur by natural convection cooling with 35 C air. A number of modeling calculations were performed using this computational heat transfer approach. Minimal additional calculations were also conducted to predict temperature increases expected for salt solution processed through columns of various heights at the slowest expected operational flow rate of 5 gpm. Results for the bounding model with no process flow and no active cooling indicate that the time required to reach the boiling point of {approx}130 C for a CST-salt solution mixture containing 257 Ci/liter of Cs-137 heat source (maximum expected loading for SCIX applications) at 35 C initial temperature is about 6 days. Modeling results for a column actively cooled with external wall jackets and the internal coolant pipe (inlet coolant water temperature: 25 C) indicate that the CST column can be maintained non-boiling under these conditions indefinitely. The results also show that the maximum temperature of an RF-salt solution column containing 133 Ci/liter of Cs-137 (maximum expected loading) will never reach boiling under any conditions (maximum predicted temperature without cooling: 88 C). The results indicate that a 6-in cooling pipe at the center of the column provides the most effective cooling mechanism for reducing the

  1. Utilization of Facebook in studio Arven's marketing

    OpenAIRE

    Hausmannová, Klára

    2012-01-01

    Title: Utilization of Facebook in studio Arven's marketing Objectives: The aim of this work is to create a facebook fan page for Power Plate studio Arven in Čelákovice. The facebook fan page was created on the basis of survey. Then the effectiveness of the page was evaluated. Methods: In this work have been taken both quantitative and qualitative methods. The quantitative method was applied in survey among existing clients of studio Arven and facebook fans of fitness clubs. Qualitative method...

  2. The Design and Analysis of a Novel Split-H-Shaped Metamaterial for Multi-Band Microwave Applications

    Directory of Open Access Journals (Sweden)

    Sikder Sunbeam Islam

    2014-07-01

    Full Text Available This paper presents the design and analysis of a novel split-H-shaped metamaterial unit cell structure that is applicable in a multi-band frequency range and that exhibits negative permeability and permittivity in those frequency bands. In the basic design, the separate split-square resonators are joined by a metal link to form an H-shaped unit structure. Moreover, an analysis and a comparison of the 1 × 1 array and 2 × 2 array structures and the 1 × 1 and 2 × 2 unit cell configurations were performed. All of these configurations demonstrate multi-band operating frequencies (S-band, C-band, X-band and Ku-band with double-negative characteristics. The equivalent circuit model and measured result for each unit cell are presented to validate the resonant behavior. The commercially available finite-difference time-domain (FDTD-based simulation software, Computer Simulation Technology (CST Microwave Studio, was used to obtain the reflection and transmission parameters of each unit cell. This is a novel and promising design in the electromagnetic paradigm for its simplicity, scalability, double-negative characteristics and multi-band operation.

  3. A Reconfigurable Metal-Plasma Yagi-Yuda Antenna for Microwave Applications

    Directory of Open Access Journals (Sweden)

    Giulia Mansutti

    2017-05-01

    Full Text Available This paper is an extension of the work originally presented at the European Microwave Conference (EuMC about a reconfigurable hybrid metal-plasma Yagi-Uda antenna operating at 1.55 GHz: this antenna consists of metallic reflector and active element and two plasma directors. The conference work showed through full-wave numerical simulations (CST Microwave Studio how it is possible to achieve reconfigurability with respect to the gain by turning on/off the plasma discharges. However the model that was used to represent the plasma discharges was quite ideal, so one comment that was provided questioned the actual possibility of achieving reconfigurability in a real system. Consequently we performed extensive measurements of different plasma discharges and thanks to the collected data, we noticed some important differences between the full-wave numerical model of the plasma that we used in the conference paper and the actual plasma discharges that were generated in the experimental setup: the dielectric vessel and the metallic electrodes used respectively to confine and generate the plasma have an influence on the radiation pattern of the antenna and so they must be included in the design procedure; the cylindrical plasma discharge is much easier to realize when the cylinder diameter is at least 3mm; and finally the collision frequency of the plasma in realistic cases is pretty higher than the one adopted in our previous work. Therefore this work presents a feasibility study of a more detailed and realistic model of our antenna with respect to the plasma discharges. We will show that reconfigurability can still be achieved through a proper design of the overall antenna, thus paving the way to an actual realization of the proposed reconfigurable Yagi-Uda.

  4. Porous Privacy: The Literati Studio and Spatiality in Song China

    OpenAIRE

    Zhang, Yunshuang

    2017-01-01

    My dissertation examines the distinctive significance of the studio during the Song dynasty (960–1279) through its various literary and visual representations. Simply speaking, the studio was an enclosed site specifically used for reading, writing, and art creation. Pre-Song texts have records of a few early examples of studio sites in China. However, it was during the Song dynasty that the studio became a prominent cultural space for literati. The studio became both an object of scholarly re...

  5. Flowscapes : Design studio for landscape infrastructures

    NARCIS (Netherlands)

    Nijhuis, S.; Jauslin, D.T.

    2013-01-01

    The newly established Flowscapes studio addresses relevant sociocultural, ecological and technological issues from the perspective of spatial planning and design. Urbanization, ecological crisis and climate change are complex problems that only can be addressed transdisciplinary and from an

  6. Refactoring with Microsoft Visual Studio 2010

    CERN Document Server

    Ritchie, Peter

    2010-01-01

    Refactor with Microsoft Visual Studio 2010 and evolve your software system to support new and ever-changing requirements by updating your C# code base with patterns and principles with this book and eBook

  7. Association between CST3 rs2424577 polymorphism and corpulence related phenotypes during lifetime in populations of European ancestry

    DEFF Research Database (Denmark)

    Hooton, Henri; Dubern, Beatrice; Henegar, Corneliu

    2011-01-01

    Cystatin C, a protein coded by CST3 gene, is implicated in adipose tissue biology. Our hypothesis is that common variants in CST3 gene could play a role in the development of corpulence during lifetime....

  8. Integrating Sustainability in Interior Design Studio

    OpenAIRE

    Karslı, Umut Tuğlu

    2013-01-01

    Teaching methods on concept of sustainability are frequently searched in the interior architecture education. The purpose of this study is to propose a model for integrating sustainability in interior design studio. In this context, the first part of the research defines relationship between sustainability and interior architecture and determines sustainable interior design principles. In the second part, an interior design studio model is proposed and principles determined in the first part ...

  9. Setting up a medical portrait studio.

    Science.gov (United States)

    Neff, Laura L; Humphrey, Clinton D; Kriet, J David

    2010-05-01

    Consistency of photographic documentation is essential for facial plastic surgery, a visual surgical subspecialty. Photographs are often used to validate surgical outcomes but have many other uses including education, publication, and marketing. Utilization of a properly equipped medical portrait studio will dramatically increase the quality of photographic images. In this article, the authors discuss the steps necessary to set up and use an officebased portrait studio. Copyright 2010 Elsevier Inc. All rights reserved.

  10. A new video studio for CERN

    CERN Multimedia

    Anaïs Vernede

    2011-01-01

    On Monday, 14 February 2011 CERN's new video studio was inaugurated with a recording of "Spotlight on CERN", featuring an interview with the DG, Rolf Heuer.   CERN's new video studio. Almost all international organisations have a studio for their audiovisual communications, and now it's CERN’s turn to acquire such a facility. “In the past, we've made videos using the Globe audiovisual facilities and sometimes using the small photographic studio, which is equipped with simple temporary sets that aren’t really suitable for video,” explains Jacques Fichet, head of CERN‘s audiovisual service. Once the decision had been taken to create the new 100 square-metre video studio, the work took only five months to complete. The studio, located in Building 510, is equipped with a cyclorama (a continuous smooth white wall used as a background) measuring 3 m in height and 16 m in length, as well as a teleprompter, a rail-mounted camera dolly fo...

  11. Reactivity of Crystalline Silicotitanate (CST) and Hazardous Metal/Actinide Loading During Low Curie Salt Use

    Energy Technology Data Exchange (ETDEWEB)

    WILLIAM, WILMARTH

    2004-11-30

    Crystalline Silicotitanate (CST) in its engineered form (IONSIV (registered) IE-911) continues to be studied for possible use for removing radioactive cesium from several types of waste solutions at the Savannah River Site. This study involved deriving information about spent CST that assists in determining possible disposition alternatives. Results for this work include: After passing 3000 column volumes of a dissolved saltcake simulant containing RCRA hazardous metals, the spent CST passed a TCLP test and is RCRA nonhazardous. The spent CST was found to have transuranic concentrations greater than the TRU limit of 100 nCi/g. The triplicate measurement showed TRU levels greater than 4000 nCi/g. Studies involving simulating storage of ground CST in sludge slurries indicated no detrimental effects on the measured yield stress or viscosity of the slurries when stored for up to 4 months at 50 degrees C. During the storage testing, there was no indication of significant degradation of the C ST as measured by in growth of CST-specific elements in the liquid phase of the slurry. Also, during storage tests minor desorption of cesium from the ground CST material was observed.

  12. Glass formulation development and testing for the vitrification of cesium-loaded crystalline silicotitanate (CST)

    International Nuclear Information System (INIS)

    Andrews, M.K.

    1997-01-01

    Crystalline Silicotitanate (CST) is an inorganic ion exchange medium that was designed to sorb Cs-137, Sr-90 and several other radionuclides. CST exhibits high selectivity for the ion exchange of cesium from highly alkaline solutions containing large quantities of sodium. Through the Tanks Focus Area (TFA), Oak Ridge National Laboratory (ORNL) was funded to demonstrate the effectiveness of CST as an ion exchange material using supernate from the Melton Valley Storage Tanks (MVST). After processing the supernate through columns containing CST, the CST will be sluiced into drums and dewatered. Some of the CST will be shipped to the Savannah River Technology Center (SRTC) to demonstrate vitrification of the cesium-loaded CST in the shielded cells facility of SRTC. Vitrification is considered to be the Best Demonstrated Available Technology for immobilization of high-level waste and is currently being investigated for the treatment of low-level/mixed wastes. Vitrification of cesium-loaded CST offers a number of benefits. Vitrification: (1) is less expensive than many of the technologies available; (2) offers a large volume reduction; (3) produces a waste form that is very durable; (4) is an established technology; (5) can be used for a wide variety of waste streams; and (6) produces a waste form that is resistant to radiation damage. Prior to a full-scale demonstration, a glass formulation that will produce a glass that is both processable and durable must be developed. Crucible studies using unloaded CST and reagent grade glass-forming chemicals (or frit) were performed. Initially, scoping studies were performed to determine the chemicals necessary to form a glass. A screening experiment was then performed to determine the quantity of chemicals required. Finally, tests were conducted to determine the waste loading to be used during processing in the melter

  13. Glass formulation development and testing for the vitrification of cesium-loaded crystalline silicotitanate (CST)

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, M.K.

    1997-12-31

    Crystalline Silicotitanate (CST) is an inorganic ion exchange medium that was designed to sorb Cs-137, Sr-90 and several other radionuclides. CST exhibits high selectivity for the ion exchange of cesium from highly alkaline solutions containing large quantities of sodium. Through the Tanks Focus Area (TFA), Oak Ridge National Laboratory (ORNL) was funded to demonstrate the effectiveness of CST as an ion exchange material using supernate from the Melton Valley Storage Tanks (MVST). After processing the supernate through columns containing CST, the CST will be sluiced into drums and dewatered. Some of the CST will be shipped to the Savannah River Technology Center (SRTC) to demonstrate vitrification of the cesium-loaded CST in the shielded cells facility of SRTC. Vitrification is considered to be the Best Demonstrated Available Technology for immobilization of high-level waste and is currently being investigated for the treatment of low-level/mixed wastes. Vitrification of cesium-loaded CST offers a number of benefits. Vitrification: (1) is less expensive than many of the technologies available; (2) offers a large volume reduction; (3) produces a waste form that is very durable; (4) is an established technology; (5) can be used for a wide variety of waste streams; and (6) produces a waste form that is resistant to radiation damage. Prior to a full-scale demonstration, a glass formulation that will produce a glass that is both processable and durable must be developed. Crucible studies using unloaded CST and reagent grade glass-forming chemicals (or frit) were performed. Initially, scoping studies were performed to determine the chemicals necessary to form a glass. A screening experiment was then performed to determine the quantity of chemicals required. Finally, tests were conducted to determine the waste loading to be used during processing in the melter.

  14. SDL Trados Studio a practical guide

    CERN Document Server

    Walker, Andy

    2014-01-01

    A step-by-step guide with clear instructions on how to get started with the SDL Trados Studio pack. You will learn everything from installation to the final translations.This book is designed for both beginners and more experienced users alike. If you are new to SDL Trados Studio, you will be able to get to grips with its essential features quickly, but if you already have some experience of the program, you will find plenty of material to enhance your knowledge.

  15. Designing and Maintaining the CATV and Small TV Studio.

    Science.gov (United States)

    Knecht, Kenneth B.

    Written especially for those who want expert, indepth guidance on setting up a small-to-medium size television studio, this handbook is a detailed guide on the installation and maintenance of production facilities for cable, closed-circuit, instructional, and small broadcast television studios. Detailed discussions are included of studio pulse…

  16. The Artists of the Universal Studios of Art, Lagos, Nigeria

    African Journals Online (AJOL)

    Nneka Umera-Okeke

    Art flourished with the contributions of, mostly, schools, workshops and studios spread around the country. The Universal Studios of Art, Lagos happened to be a stakeholder to the growth of art professionalism for more than fifteen years. The studios accommodated sculpture, painting, metal design, graphics and ceramics.

  17. Studios as Locations of Possibility: Remembering a History

    Science.gov (United States)

    Wix, Linney

    2010-01-01

    This paper considers the studio in art therapy as a neglected yet key aspect of the field's history. Descriptions of studio art practice among the founders of the American Art Therapy Association and such predecessors as Mary Huntoon were obtained through historical research. Because both art therapy and art studios are hybrid in nature, the…

  18. Elisa Studio showroom = Elisa Studio showroom / Jan Joonas Graps ; kommenteerinud Tiina Kuusisto

    Index Scriptorium Estoniae

    Graps, Jan Joonas, 1972-

    2015-01-01

    Elisa Studio showroom Helsingis Lasiplatsi, Mannerheimintie 22-24. Sisekujunduse autorid Jan Joonas Graps, Ken-Kristjan Ruut, Anne Määrmann (JanKen Wisespace). Lühidalt loovstuudiost JanKen Wisespace

  19. A welding technology using RobotStudio

    OpenAIRE

    Cohal Viorel

    2017-01-01

    The paper presents the results obtained in designing a welding workstation by using offline programming in RobotStudio. The developed model was used to simulate welding elements of a welded assembly. Welding routes are obtained offline. By using ArcWelding module and VirtualArc there were obtained parameters of welding technology, which are automatically in WPS.

  20. Reducing Anxiety: Studio Strategies for Performing Salvation

    Science.gov (United States)

    Riley, Jessica M.

    2012-01-01

    This article offers a brief overview of the causes and manifestations of performance anxiety and suggests methods for professors to combat it in the studio setting. The topics of mentoring, physical and mental relaxation, dietary health, and imaging are explored. Primary source material is referred to throughout the article, so readers can easily…

  1. The Frank Lloyd Wright Home and Studio.

    Science.gov (United States)

    Donahue, Kimberly; Gabor, Sharon

    1989-01-01

    This lesson plan introduces seventh-ninth graders to Frank Lloyd Wright and shows how nature influenced and inspired the design of his home and studio. Students will: identify natural design elements from the house, apply their awareness of form to their own natural and built environment, and create designs based on natural forms they find…

  2. MBN Explorer and MBN Studio Tutorials

    DEFF Research Database (Denmark)

    Solov'yov, Ilia A.; Sushko, Gennady; Verkhovtsev, Alexey

    , Linux, and macOS. It is fully parallelised and can be exploited on computer clusters and supercomputers. MBN Studio is a special multi-task software toolkit with a graphical user interface for MBN Explorer. It helps setting up calculations with MBN Explorer, monitoring their progress and examining...

  3. A New Paradigm for Design Studio Education

    Science.gov (United States)

    Wang, Tsungjuang

    2010-01-01

    There is a feeling among many design educators today that the discipline has reached a crisis in its development, and that change is needed immediately in the way that design educators articulate their epistemology and their methodology. The architectural studio can be seen as the model for design education, and its culture is exemplary. Donald…

  4. Collaborative Learning in the Music Studio

    Science.gov (United States)

    King, Andrew

    2008-01-01

    This article presents some of the findings from a mixed-methods case study that investigated collaborative learning for pairs of higher education students working in a music studio on a drum kit recording. A stratified purposive sampling technique was used and students were allocated a partner of similar ability; often referred to as a…

  5. Familiarizing Visual Studio .Net Integrated Development Environment

    OpenAIRE

    2002-01-01

    sim tut present Simulation Tutorial Presentation Interactive Media Element This tutorial provides an overview animated tour of the Visual Studio .Net Integrated Development Environment (IDE) where Visual Basic .Net projects may be created and tested. IS2020 Introduction to Object-Oriented Programming using Visual Basic

  6. STEM Studio: Where Innovation Generates Innovation

    Science.gov (United States)

    Plonczak, Irene; Brooks, Jacqueline Grennon; Wilson, Gloria Lodato; Elijah, Rosebud; Caliendo, Julia

    2014-01-01

    STEM Studio at Hofstra University is a clinical practice site that brings together public school pupils and preservice teachers in settings with three features that lead to enhanced learning of all participants: classroom structures using multidisciplinary STEM tasks as platforms for learning; design challenge templates for diverse student…

  7. Implementasi Metode Studio-Based Learning dalam Pengelolaan dan Prosedur Pembelajaran Studio Perancangan Arsitektur

    Directory of Open Access Journals (Sweden)

    Muhammad Rijal

    2012-01-01

    Full Text Available

    Learning Model studio known as Studio - Based Learning (SBL has the main features hands-on or first hand experience or learning by doing. Ideally, most of the SBL activities, either individually or in groups, conducted in a studio which was accompanied by a number of teachers / assistants. Student’s evaluation efficiently when using the method of correlational research conducted with data collection and analysis of questionnaire data with the statistics. Questions in the questionnaire were arranged by following structure: the ability of professors, lecturer’s attitudes, organization of the studio system, the ability of students, and student attitudes. Penelitian Tindakan Kelas (PTK was conducted on students of Architectural Engineering, Faculty of Engineering UR S1 are taking courses in Architectural Design Studio 2010/2011 academic year, are 22 students. Four cycles of study procedures are planning, action, observation and reflection. Quantitive analysis was used to data analysis. The result of the research was the assessment of knowledge of the supervisor, supervisor attitudes, and the studio administration systems are good category. 

  8. Implementasi Metode Studio-Based Learning dalam Pengelolaan dan Prosedur Pembelajaran Studio Perancangan Arsitektur

    Directory of Open Access Journals (Sweden)

    Muhammad Rijal

    2012-02-01

    Full Text Available Learning Model studio known as Studio - Based Learning (SBL has the main features hands-on or first hand experience or learning by doing. Ideally, most of the SBL activities, either individually or in groups, conducted in a studio which was accompanied by a number of teachers / assistants. Student’s evaluation efficiently when using the method of correlational research conducted with data collection and analysis of questionnaire data with the statistics. Questions in the questionnaire were arranged by following structure: the ability of professors, lecturer’s attitudes, organization of the studio system, the ability of students, and student attitudes. Penelitian Tindakan Kelas (PTK was conducted on students of Architectural Engineering, Faculty of Engineering UR S1 are taking courses in Architectural Design Studio 2010/2011 academic year, are 22 students. Four cycles of study procedures are planning, action, observation and reflection. Quantitive analysis was used to data analysis. The result of the research was the assessment of knowledge of the supervisor, supervisor attitudes, and the studio administration systems are good category. 

  9. TEACHING A CONVENTIONAL ARCH-DESIGN STUDIO

    Directory of Open Access Journals (Sweden)

    EIGBEONAN, Andrew B.

    2012-12-01

    Full Text Available Extensive exploration of literatures, stakeholders’ statements, comments, debates and arguments etc from seminars, conferences, fora, meetings, telephone calls, email correspondences, etc are critically reviewed in this paper and are used to argue for improved ways and methods of architetural design education. Although there are similarities in the curriculas of training architects all over the world, but educators go about it in their own convenient and suitable ways and styles. Collaboration of academic and practicing architects’ participation in teaching of the arch-design studio and integrated course work with other disciplines are not new in training of architects, this review goes further to argue for a selection criteria and more integration especially of related professionals in the building industry in teaching the arch-design studio. Training to think globally and act locally (adaptable hence sustainability and creativity are taken as the central themes for effective delivery of arch-design educat on. The topic is very relevant and timely as arch-educators and other stakeholders are of the opinion that something has to be done to improve the ways and methods of training architects, especially the teaching of the arch-design studio. The paper uses the theoritical under-pinnings of collaboration, integration and adaptability to argue for or against the ways and methods of teaching the arch-design studio and recommends the participants that will be making meaniful and positive contributions to the effective teaching of the arch-design studio. That is more of team work (integration and collaboration but based on selection process of who should participate in the teaching and that is adaptable to the people and the environment.

  10. Glass formulation requirements for Hanford coupled operations using crystalline silicotitanates (CST)

    International Nuclear Information System (INIS)

    Andrews, M.K.; Harbour, J.R.

    1997-01-01

    The U.S. Department of Energy (DOE) through the Richland Operations Office has requested proposals from the private sector for the treatment of waste from the Hanford Waste Tanks. Phase I of this privatization initiative may include a demonstration for treatment and immobilization of both low activity and high-level waste. If the demonstration includes high-level waste, then the Cs-137 waste stream most likely will be combined with the high-level waste sludge to produce a coupled feed for immobilization (most likely vitrification using a borosilicate glass). It appears that pretreatment will involve the removal of cesium (and perhaps strontium and some transuranic radionuclides) from the supernate using an ion exchange material such as crystalline silicotitanate (CST). The ion exchange sorbent (or the eluted Cs-137) can then be combined with the sludge and vitrified in a coupled operation similar to the DWPF process. Alternatively, the cesium-loaded ion exchange sorbent can be vitrified directly to produce a separate glass waste form. SRTC has been involved in an Office of Science and Technology (EM-50) funded project to determine if Cs-137 loaded CST can be successfully incorporated into glass at significant levels. 1 For a waste form which would include only Cs-137 loaded CST, concentrations up to 60 wt% of CST in glass have been achieved. 2 The glass produced from this demonstration is both processable and durable. This CST-only waste form could be used at Hanford if the cesium-loaded CST is vitrified in a separate melter. For coupled feed operations, the CST would be mixed with high-level radioactive sludge from the Hanford tanks. This report provides the basis and the path forward for SRTC's efforts at developing a glass frit formulation which will incorporate both Hanford sludge and cesium-loaded CST for a coupled flowsheet. The goal of this work is to demonstrate the feasibility of vitrification as a method for immobilization of coupled feed (specifically

  11. MODELING CST ION EXCHANGE FOR CESIUM REMOVAL FROM SCIX BATCHES 1 - 4

    Energy Technology Data Exchange (ETDEWEB)

    Smith, F.

    2011-04-25

    The objective of this work is, through modeling, to predict the performance of Crystalline Silicotitinate (CST) for the removal of cesium from Small Column Ion Exchange (SCIX) Batches 1-4 (as proposed in Revision 16 of the Liquid Waste System Plan). The scope of this task is specified in Technical Task Request (TTR) 'SCIX Feed Modeling', HLE-TTR-2011-003, which specified using the Zheng, Anthony, Miller (ZAM) code to predict CST isotherms for six given SCIX feed compositions and the VErsatile Reaction and SEparation simulator for Liquid Chromatography (VERSE-LC) code to predict ion-exchange column behavior. The six SCIX feed compositions provided in the TTR represent SCIX Batches 1-4 and Batches 1 and 2 without caustic addition. The study also investigated the sensitivity in column performance to: (1) Flow rates of 5, 10, and 20 gpm with 10 gpm as the nominal flow; and (2) Temperatures of 25, 35, and 45 C with 35 C as the nominal temperature. The isotherms and column predictions presented in this report reflect the expected performance of engineered CST IE-911. This form of CST was used in experiments conducted at the Savannah River National Laboratory (SRNL) that formed the basis for estimating model parameters (Hamm et al., 2002). As has been done previously, the engineered resin capacity is estimated to be 68% of the capacity of particulate CST without binder.

  12. Virtual Studio Practices: Visual Artists, Social Media and Creativity

    Directory of Open Access Journals (Sweden)

    Kylie Budge

    2013-12-01

    Full Text Available Artists’ practices are varied. Two extremes include the need for complete solitude when working and others who seek social environments such as collaborations in communal studio settings. In addition to these real life studio practices new technologies and social media have made it possible for artists to use virtual studio practices in the process of developing creative work. Working virtually offers a range of interesting benefits for creative practice. This article explores the author’s recent experiences in virtual studio practices in light of the literature on this topic and considers the implications for creativity. It highlights five specific benefits in using virtual studio practices and considers possible limitations of working in such a manner. In exploring virtual studio practices and arguing the case for such ways of working, this article contributes to research and understandings about creative practice by discussing one artist’s reflective experience of using virtual studio practices.

  13. Microwave Ovens

    Science.gov (United States)

    ... Products and Procedures Home, Business, and Entertainment Products Microwave Ovens Share Tweet Linkedin Pin it More sharing ... 1030.10 - Microwave Ovens Required Reports for the Microwave Oven Manufacturers or Industry Exemption from Certain Reporting ...

  14. Microwave engineering

    CERN Document Server

    Pozar, David M

    2012-01-01

    The 4th edition of this classic text provides a thorough coverage of RF and microwave engineering concepts, starting from fundamental principles of electrical engineering, with applications to microwave circuits and devices of practical importance.  Coverage includes microwave network analysis, impedance matching, directional couplers and hybrids, microwave filters, ferrite devices, noise, nonlinear effects, and the design of microwave oscillators, amplifiers, and mixers. Material on microwave and RF systems includes wireless communications, radar, radiometry, and radiation hazards. A large

  15. CS-Studio Scan System Parallelization

    Energy Technology Data Exchange (ETDEWEB)

    Kasemir, Kay [ORNL; Pearson, Matthew R [ORNL

    2015-01-01

    For several years, the Control System Studio (CS-Studio) Scan System has successfully automated the operation of beam lines at the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) and Spallation Neutron Source (SNS). As it is applied to additional beam lines, we need to support simultaneous adjustments of temperatures or motor positions. While this can be implemented via virtual motors or similar logic inside the Experimental Physics and Industrial Control System (EPICS) Input/Output Controllers (IOCs), doing so requires a priori knowledge of experimenters requirements. By adding support for the parallel control of multiple process variables (PVs) to the Scan System, we can better support ad hoc automation of experiments that benefit from such simultaneous PV adjustments.

  16. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Tuesday 2 December From 10:00 to 16:00 - Training Centre Auditorium - bldg. 593, room 11 CST Customer Workshop - CST Computer Simulation Technology GmbH A Computer Simulation Technology (CST, http://www.cst.com) Customer Workshop is organised at CERN for people who are interested in 3D electromagnetic field simulation with CST Microwave Studio® and CST Design Studio. The CST Microwave Studio is a specialist tool for the fast and accurate 3D electromagnetic simulation of high frequency problems, with a broad application range, shorter development cycles, and virtual prototyping before physical trials. CST Design Studio provides a design environment where results from diverse simulators can be combined and analysed; a new version will be released in 2004. • 10:00 - 12:00 CST Microwave Studio, version 5. CAD-import and modelling. The new multilevel subgridding technique. Advanced new features of the T-, F- and E-solver. The user defined post-processing templates (first part). • 12:0...

  17. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Tuesday 2 December From 10:00 to 16:00 - Training Centre Auditorium - bldg. 593, room 11 CST Customer Workshop - CST Computer Simulation Technology GmbH A Computer Simulation Technology (CST, http://www.cst.com) Customer Workshop is organised at CERN for people who are interested in 3D electromagnetic field simulation with CST Microwave Studio® and CST Design Studio. The CST Microwave Studio is a specialist tool for the fast and accurate 3D electromagnetic simulation of high frequency problems, with a broad application range, shorter development cycles, and virtual prototyping before physical trials. CST Design Studio provides a design environment where results from diverse simulators can be combined and analysed; a new version will be released in 2004. 10:00 - 12:00 CST Microwave Studio, version 5. CAD-import and modelling. The new multilevel subgridding technique. Advanced new features of the T-, F- and E-solver. The user defined post-processing templates (first part). 12:00 - 13:00 Lunch. 13:00 - 1...

  18. The complete guide to DAZ Studio 4

    CERN Document Server

    Ciccone, Paolo

    2013-01-01

    The book builds up a complete project from scratch and demonstrates the power of DAZ to create life-like characters. The book is replete with detailed examples and instructions on creating a tailor-made marvel out of scratch.This book can be used by anybody who has DAZ Studio 4, regardless of their level of familiarity with the program or the concepts of 3D art.

  19. Thermal Modeling Analysis Of CST Media In The Small Column Ion Exchange Project

    International Nuclear Information System (INIS)

    Lee, S.

    2010-01-01

    Models have been developed to simulate the thermal characteristics of Crystalline Silicotitanate (CST) ion exchange media fully loaded with radioactive cesium in a column configuration and distributed within a waste storage tank. This work was conducted to support the Small Column Ion Exchange (SCIX) program which is focused on processing dissolved, high-sodium salt waste for the removal of specific radionuclides (including Cs-137, Sr-90, and actinides) within a High Level Waste (HLW) storage tank at the Savannah River Site. The SCIX design includes CST columns inserted and supported in the tank top risers for cesium removal. Temperature distributions and maximum temperatures across the column were calculated with a focus on process upset conditions. A two-dimensional computational modeling approach for the in-column ion-exchange domain was taken to include conservative, bounding estimates for key parameters such that the results would provide the maximum centerline temperatures achievable under the design configurations using a feed composition known to promote high cesium loading on CST. One salt processing scenario includes the transport of the loaded (and possibly ground) CST media to the treatment tank floor. Therefore, additional thermal modeling calculations were conducted using a three-dimensional approach to evaluate temperature distributions for the entire in-tank domain including distribution of the spent CST media either as a mound or a flat layer on the tank floor. These calculations included mixtures of CST with HLW sludge or loaded Monosodium Titanate (MST) media used for strontium/actinide sorption. The current full-scale design for the CST column includes one central cooling pipe and four outer cooling tubes. Most calculations assumed that the fluid within the column was stagnant (i.e. no buoyancy-induced flow) for a conservative estimate. A primary objective of these calculations was to estimate temperature distributions across packed CST beds

  20. Microwave imaging

    CERN Document Server

    Pastorino, Matteo

    2010-01-01

    An introduction to the most relevant theoretical and algorithmic aspects of modern microwave imaging approaches Microwave imaging-a technique used in sensing a given scene by means of interrogating microwaves-has recently proven its usefulness in providing excellent diagnostic capabilities in several areas, including civil and industrial engineering, nondestructive testing and evaluation, geophysical prospecting, and biomedical engineering. Microwave Imaging offers comprehensive descriptions of the most important techniques so far proposed for short-range microwave imaging-in

  1. Visual Studio 2010 All-in-One For Dummies

    CERN Document Server

    Moore, Andrew

    2010-01-01

    A comprehensive, easy-to-understand guide to Visual Studio 2010. Visual Studio is Microsoft's comprehensive development environment that encompasses the .NET Framework, various programming languages, and ASP.NET. Programmers love it for developing applications for mobile devices and the Web. Because Visual Studio can be complex, the All-in-One For Dummies format makes it easy for beginners to grasp its different parts and get up to speed.: Visual Studio is a development environment used with various programming languages to create a variety of applications, including those for the Web and mobi

  2. Simple Models Create Steep Learning Curves in Academic Design Studio

    DEFF Research Database (Denmark)

    Hansen, Peter Lundsgaard; Dam, Torben; Le Goffic, Virginie Corinne

    2014-01-01

    This paper presents an easily adaptable, very learning-efficient and solution-oriented design studio method: ‘the simple model method’. On a practical level it solves well known problems that occur when teaching design studios. On a theoretical level it suggests a ‘third way’ of bridging design...... theory positions normally regarded as mutually incompatible. The method is the result of years of ‘trial and error’ design studio teaching at the University of Copenhagen, triangulated with academic design theory research. Research based design studio teaching poses a fundamental pedagogical challenge...

  3. Dynamic DNA binding, junction recognition and G4 melting activity underlie the telomeric and genome-wide roles of human CST.

    Science.gov (United States)

    Bhattacharjee, Anukana; Wang, Yongyao; Diao, Jiajie; Price, Carolyn M

    2017-12-01

    Human CST (CTC1-STN1-TEN1) is a ssDNA-binding complex that helps resolve replication problems both at telomeres and genome-wide. CST resembles Replication Protein A (RPA) in that the two complexes harbor comparable arrays of OB-folds and have structurally similar small subunits. However, the overall architecture and functions of CST and RPA are distinct. Currently, the mechanism underlying CST action at diverse replication issues remains unclear. To clarify CST mechanism, we examined the capacity of CST to bind and resolve DNA structures found at sites of CST activity. We show that CST binds preferentially to ss-dsDNA junctions, an activity that can explain the incremental nature of telomeric C-strand synthesis following telomerase action. We also show that CST unfolds G-quadruplex structures, thus providing a mechanism for CST to facilitate replication through telomeres and other GC-rich regions. Finally, smFRET analysis indicates that CST binding to ssDNA is dynamic with CST complexes undergoing concentration-dependent self-displacement. These findings support an RPA-based model where dissociation and re-association of individual OB-folds allow CST to mediate loading and unloading of partner proteins to facilitate various aspects of telomere replication and genome-wide resolution of replication stress. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  4. Integration process of theoretical courses with design studios in undergraduate education: Case studies of architecture and interior design studios

    Directory of Open Access Journals (Sweden)

    Ozmehmet Ecehan

    2016-01-01

    Full Text Available The formulations of studios are the most critical problem of design studies, because the foundation of further architectural education is based on these design studios. This paper focuses on discussions of studiobased design learning systems and curriculum developments on integral design studios that aims significant and innovative frameworks. In this context, integrated design studios are the newest approaches of architectural education. In this education system every studio has its own integral course. Integral courses give support to the design studios. This support can be either theoretical or practical. Knowledge that is related with the context of the design studio can be explained in this integrated course in some cases, in some cases as simulation program can be explained in some parts of the course. The support of the integral courses to the studios must be evaluated deeply. This paper presents the positive parts and negative parts of the new integral studio approach in this context. By this way, strong and weak parts of this education system is put forward.

  5. Positive Instruction in Music Studios: Introducing a New Model for Teaching Studio Music in Schools Based upon Positive Psychology.

    Science.gov (United States)

    Patston, Tim; Waters, Lea

    This practice paper explores the intersection of school studio-music pedagogy and positive psychology in order to enhance students' learning and engagement. The paper has a practitioner focus and puts forward a new model of studio teaching, the Positive Instruction in Music Studios (PIMS) model that guides teachers through four key positive psychology processes that can be used in a music lesson: positive priming, strengths spotting, positive pause, and process praise. The model provides a new, positively oriented approach to studio-music pedagogy that can be integrated into specific methods-based programs to enhance student learning and engagement.

  6. The Hybrid Studio--Introducing Google+ as a Blended Learning Platform for Architectural Design Studio Teaching

    Science.gov (United States)

    Steinø, Nicolai; Khalid, Md. Saufuddin

    2017-01-01

    Much architecture and design teaching is based on the studio format, where the co-presence in time and space of students, instructors and physical learning artefacts form a triangle from which the learning emerges. Yet with the advent of online communication platforms and learning management systems (LMS), there is reason to study how these…

  7. TOWARDS TOTAL INTEGRATION IN DESIGN STUDIO

    Directory of Open Access Journals (Sweden)

    Shireesh A Deshpande

    2010-07-01

    Full Text Available Transmission of knowledge has been defined as “bringing the right knowledge by the right route at the right time to the right places.” In this context there is need to analyze the various pedagogical shifts associated with the decisive process of transmission and transaction of knowledge in design studio. Critical understanding of the importance of tangential knowledge and its integration within the design studio, leading to a comprehensive whole, is a significant aspect to be properly evolved and nourished in the studio. It can be argued that knowledge is not a substitute for architectural imagination but inadequate knowledge would handicap the general level of design. Being satisfied to manipulate formal configurations does not provide insights into the human experience. If the different types of knowledge that architecture requires are ignored, the profession will lose its credibility in the eyes of society. With the body of knowledge expanding diversely with the escalating wants of the user, and to further sustain the built environment with further progression, it’s quite certain to have an innovative design process that has a feel of antecedents yet is nourished by rationalism. Architectural Design is to an extent the yield of a creative process brought out through a refined approach, skill, and dexterity to suit the purpose. The assessors, the jury, or the teacher has created an aura of mystique around good design, without much explaining what good design is. Architectural education involves application of a theory of knowledge – what is known and how it is to be known. Nothing is taught unless it is learnt (Bono. Does the key to these issues lie in shifting from conventional mode to Total Integration Mode of Education?

  8. Beyond Classroom, Lab, Studio and Field

    Science.gov (United States)

    Waller, J. L.; Brey, J. A.; DeMuynck, E.; Weglarz, T. C.

    2017-12-01

    When the arts work in tandem with the sciences, the insights of these disciplines can be easily shared and teaching and learning are enriched. Our shared experiences in classroom/lab/studio instruction and in art and science based exhibitions reward all involved. Our individual disciplines cover a wide range of content- Art, Biology, Geography, Geology- yet we connect on aspects that link to the others'. We easily move from lab to studio and back again as we teach—as do our students as they learn! Art and science education can take place outside labs and studios through study abroad, international workshops, museum or gallery spaces, and in forums like the National Academies' programs. We can reach our neighbors at local public gatherings, nature centers and libraries. Our reach is extended in printed publications and in conferences. We will describe some of our activities listed above, with special focus on exhibitions: "Layers: Places in Peril"; "small problems, BIG TROUBLE" and the in-progress "River Bookends: Headwaters, Delta and the Volume of Stories In Between". Through these, learning and edification take place between the show and gallery visitors and is extended via class visits and related assignments, field trips for child and adult learners, interviews, films and panel presentations. These exhibitions offer the important opportunities for exhibit- participating scientists to find common ground with each other about their varied work. We will highlight a recent collaborative show opening a new university-based environmental research center and the rewarding activities there with art and science students and professors. We will talk about the learning enhancement added through a project that brought together a physical geography and a painting class. We will explore how students shared the form and content of their research projects with each other and then, became the educators through paintings and text of their geoscience topics on gallery walls.

  9. THE HYBRID STUDIO: INTRODUCING GOOGLE+ AS A BLENDED LEARNING PLATFORM FOR ARCHITECTURAL DESIGN STUDIO TEACHING

    Directory of Open Access Journals (Sweden)

    Nicolai Steinø

    2017-01-01

    Full Text Available Studio teaching in architecture and design traditionally bases on the presence of both instructors and material learning artefacts. Instructors typically give supervision to students one-on-one at their drawing tables. Students, in turn, work with a tangible material such as pens and tracing paper, and scale model material such as cardboard and styrofoam. From this triangle of students, instructors and learning artefacts, the learning emerges. As such, the physical presence of people and stuff is a fundamental premise of the traditional studio learning format. As the object of study in architecture and design is physical – the designed artefacts in the form of objects and buildings – a certain hesitation seems to reside in architecture and design education towards new mediated forms of learning. However, while completely mediated forms of learning such as MOOCs may not be a feasible replacement for the traditional architecture and design studio, forms of blended learning, combining physical and online learning has the potential to make the best of both worlds, enriching studio learning without losing its indisputable merits in architecture and design education. In this paper, the introduction of an online communication platform – Google+ – in a four months urban design studio course is evaluated and discussed concerning its capacity to facilitate a transforming blend. The online platform was used for general instructor/student communication, for student/student communication, as well as for sharing of student work in progress. It also worked as a one-on-one supervision platform for whenever students were in need of supervision and advice outside class hours. The implementation of Google+ into the studio course was experimental and ran alongside the use of official Moodle platform. The students evaluated the positive and negative aspects of both platforms. While they were mostly critical of Moodle, they valued the functionality of Google

  10. Parallel Programming with Intel Parallel Studio XE

    CERN Document Server

    Blair-Chappell , Stephen

    2012-01-01

    Optimize code for multi-core processors with Intel's Parallel Studio Parallel programming is rapidly becoming a "must-know" skill for developers. Yet, where to start? This teach-yourself tutorial is an ideal starting point for developers who already know Windows C and C++ and are eager to add parallelism to their code. With a focus on applying tools, techniques, and language extensions to implement parallelism, this essential resource teaches you how to write programs for multicore and leverage the power of multicore in your programs. Sharing hands-on case studies and real-world examples, the

  11. Pro HTML5 with Visual Studio 2012

    CERN Document Server

    Collins, Mark

    2012-01-01

    Pro HTML5 with Visual Studio 2012 is written to help ASP .NET developers make the leap to the inevitable and exciting world of HTML5. The growing HTML5 specifications promises to revolutionize the way web sites are developed with an impressive set of built-in client-side features. The use of HTML5 as a preferred development language in Windows 8, along with growing support from the major browser vendors, is likely to make HTML5 the de-facto standard for all future web development. The number of HTML5-capable phones alone is estimated to top 1 billion by 2013. Many professional web developers w

  12. Software testing using Visual Studio 2012

    CERN Document Server

    Subashni, S

    2013-01-01

    We will be setting up a sample test scenario, then we'll walk through the features available to deploy tests.This book is for developers and testers who want to get to grips with Visual Studio 2012 and Test Manager for all testing activities and managing tests and results in Team Foundation Server. It requires a minimal understanding of testing practices and the software development life cycle; also, some coding skills would help in customizing and updating the code generated from the web UI testing.

  13. Blender Studio Projects Digital Movie-Making

    CERN Document Server

    Mullen, Tony

    2010-01-01

    Learn how to get professional results from Blender. Start from scratch-the way it happens in the studio-and create fully rendered objects with Blender open-source 3D animation software and this real-world, roll-up-your-sleeves guide. No time is wasted-this book plunges straight into step-by-step instruction designed to help you build skills and create solid assets for film, video, and games. Blender is gaining clout in professional settings, and you can get a running start with this series of hands-on tutorials that encompasses multiple disciplines. The book includes a DVD with starter, interm

  14. The Toxoplasma gondii cyst wall protein CST1 is critical for cyst wall integrity and promotes bradyzoite persistence

    Energy Technology Data Exchange (ETDEWEB)

    Tomita, Tadakimi; Bzik, David J.; Ma, Yan Fen; Fox, Barbara A.; Markillie, Lye Meng; Taylor, Ronald C.; Kim, Kami; Weiss, Louis M.

    2013-12-26

    Toxoplasma gondii infects up to one third of the world’s population. A key to the success of T.gondii is its ability to persist for the life of its host as bradyzoites within tissue cysts. The glycosylated cyst wall is the key structural feature that facilitates persistence and oral transmission of this parasite. We have identified CST1 (TGME49_064660) as a 250 kDa SRS (SAG1 related sequence) domain protein with a large mucin-like domain. CST1 is responsible for the Dolichos biflorus Agglutinin (DBA) lectin binding characteristic of T. gondii cysts. Deletion of CST1 results in a fragile brain cyst phenotype revealed by a thinning and disruption of the underlying region of the cyst wall. These defects are reversed by complementation of CST1. Additional complementation experiments demonstrate that the CST1-mucin domain is necessary for the formation of a normal cyst wall structure, the ability of the cyst to resist mechanical stress and binding of DBA to the cyst wall. RNA-seq transcriptome analysis demonstrated dysregulation of bradyzoite genes within the various cst1 mutants. These results indicate that CST1 functions as a key structural component that reinforces the cyst wall structure and confers essential sturdiness to the T. gondii tissue cyst.

  15. Creative Practices in the Design Studio Culture: Collaboration and Communication

    NARCIS (Netherlands)

    Cacciabue, C; Vyas, Dhaval; van der Veer, Gerrit C.; Nijholt, Antinus

    2013-01-01

    For the purpose of developing collaborative support in design studio environments, we have carried out ethnographic fieldwork in professional and academic product design studios. Our intention was to understand design practices beyond the productivity point of view and take into account the

  16. Marvels fiksjonsunivers : en utforskning av superheltfilmen sett gjennom Marvel Studios

    OpenAIRE

    Søderstrøm, Jørgen Ward

    2017-01-01

    Denne oppgaven utforsker superheltfilmens historie og ser nærmere på hvordan Marvel Studios har utviklet superheltfilmen som sjanger. Ved å analysere filmene Iron Man og The Avengers ser man hvordan Marvel Studios bruker flere narrative metoder for å fortelle en flettverkshistorie i en skala man ikke har sett før.

  17. Redesigning the Urban Design Studio: Two Learning Experiments

    Science.gov (United States)

    Pak, Burak; Verbeke, Johan

    2013-01-01

    The main aim of this paper is to discuss how the combination of Web 2.0, social media and geographic technologies can provide opportunities for learning and new forms of participation in an urban design studio. This discussion is mainly based on our recent findings from two experimental urban design studio setups as well as former research and…

  18. Using Reflective Journals in a Sustainable Design Studio

    Science.gov (United States)

    Gulwadi, Gowri Betrabet

    2009-01-01

    Purpose: The purpose of this paper is to introduce a pedagogical method used in a design studio as part of a curriculum-greening process to encourage reflection on the complexity of sustainability and sustainable design. Online reflective journals were used in two semesters of a sustainable design studio to develop students' awareness and…

  19. running distance education in studio-based art institutions

    African Journals Online (AJOL)

    PUBLICATIONS1

    medium, vis-à-vis the capabilities of video-conferencing technology for running studio-based ... conferencing. Keywords: Distance education, studio-based art, print medium, video-conferencing, technology. INTRODUCTION. Distance education is one of the most effective ..... able in the virtual classroom to be accessed at.

  20. Private Studio to Public School: One Teacher's Reflection on Values

    Science.gov (United States)

    Callahan-Russell, Colleen

    2004-01-01

    This article evaluates strengths and limitations of some studio training. It focuses on values that private studio students bring to the public school setting. One teacher uses this as an opportunity to reflect on and claim her own values and desire to develop students as artists.

  1. Camtasia Studio 8 advanced editing and publishing techniques

    CERN Document Server

    Dixon, Claire Broadley

    2013-01-01

    A practical guide packed with examples that will show you how to implement the different features of Camtasia Studio 8 and create professional looking projects.If you are familiar with Camtasia Studio and you want to experiment with more advanced techniques, then this is the guide you have been looking for!

  2. Converting DYNAMO simulations to Powersim Studio simulations

    Energy Technology Data Exchange (ETDEWEB)

    Walker, La Tonya Nicole; Malczynski, Leonard A.

    2014-02-01

    DYNAMO is a computer program for building and running 'continuous' simulation models. It was developed by the Industrial Dynamics Group at the Massachusetts Institute of Technology for simulating dynamic feedback models of business, economic, and social systems. The history of the system dynamics method since 1957 includes many classic models built in DYANMO. It was not until the late 1980s that software was built to take advantage of the rise of personal computers and graphical user interfaces that DYNAMO was supplanted. There is much learning and insight to be gained from examining the DYANMO models and their accompanying research papers. We believe that it is a worthwhile exercise to convert DYNAMO models to more recent software packages. We have made an attempt to make it easier to turn these models into a more current system dynamics software language, Powersim © Studio produced by Powersim AS2 of Bergen, Norway. This guide shows how to convert DYNAMO syntax into Studio syntax.

  3. Studio-based courses in architectural acoustics

    Science.gov (United States)

    Siebein, Gary W.

    2003-04-01

    Examples of 4 nontraditional, elective courses offered to students in the Master of Architecture, Master of Science and Doctor of Philosophy degree programs in architecture are presented. Listening to Buildings involves experiential exercises in architectural acoustics for undergraduate students in a required large lecture course to form links between what people hear in a room and the architectural shapes and materials of the room that affects what is heard. The Applied Acoustics Design Lab takes students through each of the major components of an actual consulting project. Student work includes room acoustic design, sound isolation design, sound system design and HVAC noise control design for an actual building project. An Acoustical History of Theaters and Concert Halls teaches fundamentals of computer-based acoustic modeling and has students compare the physical design and aural simulations of a historic and a contemporary performance space. Graduate design studio in acoustics examines sound and silence as potential form-givers in architecture and as generative ideas for the basis of architectural interventions in complex sites and programs. Interior and exterior soundscapes and phenomenological philosophy form the background research for the studio.

  4. Glass formulation development and testing for the vitrification of DWPF HLW sludge coupled with crystalline silicotitanate (CST)

    International Nuclear Information System (INIS)

    Andrews, M.K.; Workman, P.J.

    1997-01-01

    An alternative to the In Tank Precipitation and sodium titanate processes at the Savannah River Site is the removal of cesium, strontium, and plutonium from the tank supernate by ion exchange using crystalline silicotitanate (CST). This inorganic material has been shown to effectively and selectively sorb these elements from supernate. The loaded CST could then be immobilized with High-Level Waste (HLW) sludge during vitrification. Initial efforts on the development of a glass formulation for a coupled waste stream indicate that reasonable loadings of both sludge and CST can be achieved in glass

  5. Microwave Irradiation

    Indian Academy of Sciences (India)

    Microwave Irradiation. Way to Eco-friendly, Green Chemistry. Rashmi Sanghi. This article highlights with examples, the usefulness of microwaves for carrying out a'variety of organic transfor- mations. Introduction and Background. The rapid heating of food in the kitchen using microwave ovens prompted a number of ...

  6. Three-dimensional simulation studies of 10 MeV, 352.2 MHz drift ...

    Indian Academy of Sciences (India)

    The DTL tank will consist of three sections, each about 1.2 m in length having 60 cells. The DTL has a ... The three-dimensional (3D) design of the DTL is done using CST microwave studio (CST MWS) incorporating the various nonaxisymmetric components such as tuners, post-couplers and vacuum ports. The frequency ...

  7. Three-dimensional simulation studies of 10 MeV, 352.2 MHz drift ...

    Indian Academy of Sciences (India)

    at 352.2 MHz with a maximum duty cycle of 3%. The DTL tank will consist of ... The three-dimensional (3D) design of the DTL is done using CST microwave studio (CST MWS) incorporating the various non- ..... Based on the physics design, engineering design is done for the first segment and fab- rication is being taken up.

  8. Three-Dimensional CST Parameterization Method Applied in Aircraft Aeroelastic Analysis

    Directory of Open Access Journals (Sweden)

    Hua Su

    2017-01-01

    Full Text Available Class/shape transformation (CST method has advantages of adjustable design variables and powerful parametric geometric shape design ability and has been widely used in aerodynamic design and optimization processes. Three-dimensional CST is an extension for complex aircraft and can generate diverse three-dimensional aircraft and the corresponding mesh automatically and quickly. This paper proposes a parametric structural modeling method based on gridding feature extraction from the aerodynamic mesh generated by the three-dimensional CST method. This novel method can create parametric structural model for fuselage and wing and keep the coordination between the aerodynamic mesh and the structural mesh. Based on the generated aerodynamic model and structural model, an automatic process for aeroelastic modeling and solving is presented with the panel method for aerodynamic solver and NASTRAN for structural solver. A reusable launch vehicle (RLV is used to illustrate the process for aeroelastic modeling and solving. The result shows that this method can generate aeroelastic model for diverse complex three-dimensional aircraft automatically and reduce the difficulty of aeroelastic analysis dramatically. It provides an effective approach to make use of the aeroelastic analysis at the conceptual design phase for modern aircraft.

  9. Architecture Studio Learning: Strategy to Achieve Architects Competence

    Directory of Open Access Journals (Sweden)

    Saifudin Mutaqi Ahmad

    2018-01-01

    Full Text Available In most Schools of Architecture, Architecture Studio is at the core of the architectural learning process. In the process, students are trained to have the skills of architectonic spaces design based on the study of the site, its function, and its aesthetics. Students are also trained to have awareness and understanding about the impact of their design on the surrounding environment, both physically and socially. Also, students are trained to present their designs in various forms such as visual graphics, verbal narratives, and three dimensional model animations. Indonesian Association of School of Architecture (APTARI Asosiasi Perguruan Tinggi Arsitektur Indonesia and Indonesian Institute of Architects (IAI - Ikatan Arsitek Indonesia has formulated an education Standards, Curriculum, and Achievements of Architect Professional Program to be referred by Ministry of Research, Technology, and Higher Education (KEMENRISTEKDIKTI – Kementerian Riset, Teknologi, danPerguruanTinggi as the guidance for the implementation of Architect Professional Program (PPA - Pendidikan Profesi Arsitek in Indonesia. One of the eight recommendations is the PPA Content Standard which contains the learning for the achievement of IAI Architect Competencies through the recommended study materials. However, the recommended study materials did not indicate the activity of the Architecture Studio learning model (Final Report of APTARI Part II and IAI. Will architect’s competence be achieved if the learning process withoutarchitectural studio learning model? The formulation of the curriculum that is developed independently by the IAI recommends the learning of Architectural Studio as Professional Studio. The size of the SKS is large enough to enable someone who follows the lesson to intensively gain experience in designing the building as a real architectural work. This Architecture Studio learning model is interpreted by PPAr organizer universities with various forms

  10. Analysis of facility needs level in architecture studio for students’ studio grades

    Science.gov (United States)

    Lubis, A. S.; Hamid, B.; Pane, I. F.; Marpaung, B. O. Y.

    2018-03-01

    Architects must be able to play an active role and contribute to the realization of a sustainable environment. Architectural education has inherited many education research used qualitative and quantitative methods. The data were gathered by conducting (a) observation,(b) interviews, (c) documentation, (d) literature study, and (e) Questionnaire. The gathered data were analyzed qualitatively to find out what equipment needed in the learning process in the Architecture Studio, USU. Questionnaires and Ms. Excel were used for the quantitative analysis. The tabulation of quantitative data would be correlated with the students’ studio grades. The result of the research showed that equipment with the highest level of needs was (1) drawing table, (2) Special room for each student, (3) Internet Network, (4) Air Conditioning, (5) Sufficient lighting.

  11. Genome-Wide Mapping of Binding Sites Reveals Multiple Biological Functions of the Transcription Factor Cst6p in Saccharomyces cerevisiae

    DEFF Research Database (Denmark)

    Liu, Guodong; Bergenholm, David; Nielsen, Jens

    2016-01-01

    In the model eukaryote Saccharomyces cerevisiae, the transcription factor Cst6p has been reported to play important roles in several biological processes. However, the genome-wide targets of Cst6p and its physiological functions remain unknown. Here, we mapped the genome-wide binding sites of Cst6p...... of transcription factors. In the model eukaryote Saccharomyces cerevisiae, the transcription factor Cst6p has been reported to regulate several biological processes, while its genome-wide targets remain unknown. Here, we mapped the genome-wide binding sites of Cst6p at high resolution. We show that the binding...... at high resolution. Cst6p binds to the promoter regions of 59 genes with various biological functions when cells are grown on ethanol but hardly binds to the promoter at any gene when cells are grown on glucose. The retarded growth of the CST6 deletion mutant on ethanol is attributed to the markedly...

  12. Color studio in crisis: embracing change

    Science.gov (United States)

    Smith, Dianne

    2002-06-01

    Teaching color to students of architecture and design within the higher education sector is becoming more of a luxury than of core business. With increasing financial demands, reduced resources, and increasing student numbers, educators are required to think laterally to cater for change without sacrificing learning objectives. This paper raises some of the issues involved in the educative climate within one Australian university setting. Using a reflective narrative, educational objectives are defined, the implementation of new modes of 'teaching' as a means of coping with higher student numbers and reduced staffing and technical resources are described, and the outcomes in terms of student learning over an eight year period are critiqued. Institutional management policy is forcing the educator to re-evaluate the value of the traditional studio, and the intensive 'hands- on' interactive approach that traditionally is integral to such an approach. As curriculum development involves not only theory and project work, the classroom culture, the physical environment and the University and School context need to be addressed. Generic skills, in association with professional knowledge and skills, should be addressed, and therefore, opportunities for teaching a traditionally studio-based subject on-line as a computer based unit would appear to be limited. This discussion aims to pose questions, as well as reflecting upon successes and failures in this area of education within the University context. There is a need to embrace the contextual demands while ensuring that the student knowledge of color , and the joy of discovering its characteristics in practice, are not sacrificed but enhanced.

  13. Whole Genome Sequencing and Multiplex qPCR Methods to Identify Campylobacter jejuni Encoding cst-II or cst-III Sialyltransferase.

    Science.gov (United States)

    Neal-McKinney, Jason M; Liu, Kun C; Jinneman, Karen C; Wu, Wen-Hsin; Rice, Daniel H

    2018-01-01

    Campylobacter jejuni causes more than 2 million cases of gastroenteritis annually in the United States, and is also linked to the autoimmune sequelae Guillan-Barre syndrome (GBS). GBS often results in flaccid paralysis, as the myelin sheaths of nerve cells are degraded by the adaptive immune response. Certain strains of C. jejuni modify their lipooligosaccharide (LOS) with the addition of neuraminic acid, resulting in LOS moieties that are structurally similar to gangliosides present on nerve cells. This can trigger GBS in a susceptible host, as antibodies generated against C. jejuni can cross-react with gangliosides, leading to demyelination of nerves and a loss of signal transduction. The goal of this study was to develop a quantitative PCR (qPCR) method and use whole genome sequencing data to detect the Campylobacter sialyltransferase ( cst ) genes responsible for the addition of neuraminic acid to LOS. The qPCR method was used to screen a library of 89 C. jejuni field samples collected by the Food and Drug Administration Pacific Northwest Lab (PNL) as well as clinical isolates transferred to PNL. In silico analysis was used to screen 827 C. jejuni genomes in the FDA GenomeTrakr SRA database. The results indicate that a majority of C. jejuni strains could produce LOS with ganglioside mimicry, as 43.8% of PNL isolates and 46.9% of the GenomeTrakr isolates lacked the cst genes. The methods described in this study can be used by public health laboratories to rapidly determine whether a C. jejuni isolate has the potential to induce GBS. Based on these results, a majority of C. jejuni in the PNL collection and submitted to GenomeTrakr have the potential to produce LOS that mimics human gangliosides.

  14. Whole Genome Sequencing and Multiplex qPCR Methods to Identify Campylobacter jejuni Encoding cst-II or cst-III Sialyltransferase

    Directory of Open Access Journals (Sweden)

    Jason M. Neal-McKinney

    2018-03-01

    Full Text Available Campylobacter jejuni causes more than 2 million cases of gastroenteritis annually in the United States, and is also linked to the autoimmune sequelae Guillan–Barre syndrome (GBS. GBS often results in flaccid paralysis, as the myelin sheaths of nerve cells are degraded by the adaptive immune response. Certain strains of C. jejuni modify their lipooligosaccharide (LOS with the addition of neuraminic acid, resulting in LOS moieties that are structurally similar to gangliosides present on nerve cells. This can trigger GBS in a susceptible host, as antibodies generated against C. jejuni can cross-react with gangliosides, leading to demyelination of nerves and a loss of signal transduction. The goal of this study was to develop a quantitative PCR (qPCR method and use whole genome sequencing data to detect the Campylobactersialyltransferase (cst genes responsible for the addition of neuraminic acid to LOS. The qPCR method was used to screen a library of 89 C. jejuni field samples collected by the Food and Drug Administration Pacific Northwest Lab (PNL as well as clinical isolates transferred to PNL. In silico analysis was used to screen 827 C. jejuni genomes in the FDA GenomeTrakr SRA database. The results indicate that a majority of C. jejuni strains could produce LOS with ganglioside mimicry, as 43.8% of PNL isolates and 46.9% of the GenomeTrakr isolates lacked the cst genes. The methods described in this study can be used by public health laboratories to rapidly determine whether a C. jejuni isolate has the potential to induce GBS. Based on these results, a majority of C. jejuni in the PNL collection and submitted to GenomeTrakr have the potential to produce LOS that mimics human gangliosides.

  15. Microwave undulator

    International Nuclear Information System (INIS)

    Batchelor, K.

    1986-03-01

    The theory of a microwave undulator utilizing a plane rectangular waveguide operating in the TE/sub 10n/ mode and other higher order modes is presented. Based on this, a possible undulator configuration is analyzed, leading to the conclusion that the microwave undulator represents a viable option for undulator wavelength down to about 1 cm where peak voltage and available microwave power considerations limit effectiveness. 4 refs., 4 figs

  16. Family house and studio by A1architects, Prague

    Czech Academy of Sciences Publication Activity Database

    Hnídková, Vendula

    -, č. 63 (2015), s. 61 ISSN 1573-3815 Institutional support: RVO:68378033 Keywords : Czech contemporary architecture * family house and studio * A1architects Subject RIV: AL - Art, Architecture , Cultural Heritage

  17. Visual Studio 2013 and .NET 4.5 expert cookbook

    CERN Document Server

    Sur, Abhishek

    2014-01-01

    If you are a Visual Studio 2013 or .NET developer who would like to sharpen your existing skill set and adapt to new .NET technologies, this is the book for you. A basic understanding of .NET and C# is required.

  18. Microwave Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Makes ultra-high-resolution field measurements. The Microwave Microscope (MWM) has been used in support of several NRL experimental programs involving sea...

  19. Microwave detector

    Science.gov (United States)

    Meldner, H.W.; Cusson, R.Y.; Johnson, R.M.

    1985-02-08

    A microwave detector is provided for measuring the envelope shape of a microwave pulse comprised of high-frequency oscillations. A biased ferrite produces a magnetization field flux that links a B-dot loop. The magnetic field of the microwave pulse participates in the formation of the magnetization field flux. High-frequency insensitive means are provided for measuring electric voltage or current induced in the B-dot loop. The recorded output of the detector is proportional to the time derivative of the square of the envelope shape of the microwave pulse.

  20. A Tuned Value Chain Model for University Based Public Research Organisation. Case Lut Cst.

    Directory of Open Access Journals (Sweden)

    Vesa Karvonen

    2012-12-01

    Full Text Available The Porter´s value chain model was introduced for strategic business purposes. During the last decades also Universities and University based institutes have started to use actions similar to private business concepts. A University based institute is not independent actor like company but there are interest groups who are expecting them to act like they would be. This article discusses about the possibility of utilize tuned value chain to public research organizations (PRO. Also the interactions of tuned value chain model to existing industrial network are discussed. The case study object is the Centre for Separation Technology (CST at Lappeenranta University of Technology (LUT in Finland.

  1. Modeling lift operations with SASmacr Simulation Studio

    Science.gov (United States)

    Kar, Leow Soo

    2016-10-01

    Lifts or elevators are an essential part of multistorey buildings which provide vertical transportation for its occupants. In large and high-rise apartment buildings, its occupants are permanent, while in buildings, like hospitals or office blocks, the occupants are temporary or users of the buildings. They come in to work or to visit, and thus, the population of such buildings are much higher than those in residential apartments. It is common these days that large office blocks or hospitals have at least 8 to 10 lifts serving its population. In order to optimize the level of service performance, different transportation schemes are devised to control the lift operations. For example, one lift may be assigned to solely service the even floors and another solely for the odd floors, etc. In this paper, a basic lift system is modelled using SAS Simulation Studio to study the effect of factors such as the number of floors, capacity of the lift car, arrival rate and exit rate of passengers at each floor, peak and off peak periods on the system performance. The simulation is applied to a real lift operation in Sunway College's North Building to validate the model.

  2. A History of the Sonocare CST-100: The First FDA-approved HIFU Device

    Science.gov (United States)

    Muratore, Robert

    2006-05-01

    The Sonocare CST-100 Therapeutic Ultrasound System, designed for the treatment of glaucoma, was developed in the 1980s and became the first high intensity focused ultrasound (HIFU) device to receive Food and Drug Administration approval. The system arose from studies done by F.L. Lizzi, Eng.Sc.D., of Riverside Research Institute and D.J. Coleman, M.D., of Cornell Medical Center/New York Hospital on the safety of ultrasound diagnosis of the eye. As safety limits were probed, therapeutic regimes were discovered. Optimization of operational parameters, clinical experience, and engineering design came together through a spin-off company, Sonocare, Inc., formed to produce and market the ophthalmic device. Various precedents were set during the approval process, including the acceptance by the FDA of radiation momentum imparted to an absorber as a measure of acoustic power. Many devices were sold, but the laser industry, grandfathered into the therapeutic field, eventually out-marketed Sonocare. The CST-100 remains as a model of elegant industrial design, and existing units are used daily in HIFU laboratory experiments.

  3. [Screening for dementia: validity of the Cognitive Screening Test (CST) and the Mini-Mental State Examination].

    Science.gov (United States)

    Ponds, R W; Verhey, F R; Rozendaal, N; Jolles, J; Deelman, B G

    1992-06-01

    The Cognitive Screening Test (CST--short version), a Dutch orientation questionnaire, and the Mini-Mental State Examination (MMSE) were compared with respect to their ability to discriminate between mildly demented, moderately demented and non-demented patients. The difference between mildly and moderately demented patients was based on the Global Deterioration Scale score. The CST and the MMSE were administered to patients who had been referred to the Memory Clinic of the University Hospital of Maastricht. Both instruments were successful in discriminating moderately and severely demented from non-demented patients. The CST and the MMSE were also successful with respect to the classification of depressive, non-demented elderly patients. The CST did not succeed in the correct classification of mildly demented patients (50% false-negative). The results of the MMSE in this group of mildly demented patients were moderate (25% false-negative). It is concluded that the value of both screening instruments, and especially the short version of the CST is limited for clinical practice.

  4. Human CST Facilitates Genome-wide RAD51 Recruitment to GC-Rich Repetitive Sequences in Response to Replication Stress.

    Science.gov (United States)

    Chastain, Megan; Zhou, Qing; Shiva, Olga; Fadri-Moskwik, Maria; Whitmore, Leanne; Jia, Pingping; Dai, Xueyu; Huang, Chenhui; Ye, Ping; Chai, Weihang

    2016-08-02

    The telomeric CTC1/STN1/TEN1 (CST) complex has been implicated in promoting replication recovery under replication stress at genomic regions, yet its precise role is unclear. Here, we report that STN1 is enriched at GC-rich repetitive sequences genome-wide in response to hydroxyurea (HU)-induced replication stress. STN1 deficiency exacerbates the fragility of these sequences under replication stress, resulting in chromosome fragmentation. We find that upon fork stalling, CST proteins form distinct nuclear foci that colocalize with RAD51. Furthermore, replication stress induces physical association of CST with RAD51 in an ATR-dependent manner. Strikingly, CST deficiency diminishes HU-induced RAD51 foci formation and reduces RAD51 recruitment to telomeres and non-telomeric GC-rich fragile sequences. Collectively, our findings establish that CST promotes RAD51 recruitment to GC-rich repetitive sequences in response to replication stress to facilitate replication restart, thereby providing insights into the mechanism underlying genome stability maintenance. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

  5. Microwave Measurements

    CERN Document Server

    Skinner, A D

    2007-01-01

    The IET has organised training courses on microwave measurements since 1983, at which experts have lectured on modern developments. Their lecture notes were first published in book form in 1985 and then again in 1989, and they have proved popular for many years with a readership beyond those who attended the courses. The purpose of this third edition of the lecture notes is to bring the latest techniques in microwave measurements to this wider audience. The book begins with a survey of the theory of current microwave circuits and continues with a description of the techniques for the measureme

  6. Microwave photonics

    CERN Document Server

    Lee, Chi H

    2006-01-01

    Wireless, optical, and electronic networks continue to converge, prompting heavy research into the interface between microwave electronics, ultrafast optics, and photonic technologies. New developments arrive nearly as fast as the photons under investigation, and their commercial impact depends on the ability to stay abreast of new findings, techniques, and technologies. Presenting a broad yet in-depth survey, Microwave Photonics examines the major advances that are affecting new applications in this rapidly expanding field.This book reviews important achievements made in microwave photonics o

  7. The Studio Motif in Henri Matisse’s Paintings and The Influence of The Red Studio on Painters of The Second Half of The Twentieth Century

    Directory of Open Access Journals (Sweden)

    Manja Premrl

    2009-12-01

    The most prominent Slovenian modernist painter, Gabrijel Stupica, did not directly rely on The Red Studio, but is linked with Matisse because of the fact that Stupica entered into modernism only with his picture of the studio as a two-dimensional space. In his pictures of studio interiors, Marjan Dovjak showed a sense for ignoring the depth of space, distorted proportions, and decorative forms similar to Matisse in The Red Studio. Bogdan Borčič also paid homage to Matisse’s masterpiece with his great monochrome pictures of studios. An examination of the studio motif by American and Slovene painters therefore shows that The Red Studio has preserved its inspirational power to today and will therefore remain an interesting topic for future researchers.

  8. PEMBELAJARAN SISTEM HIDROLIK DAN PNEUMATIK DENGAN MENGGUNAKAN AUTOMATION STUDIO

    Directory of Open Access Journals (Sweden)

    Adi Dewanto

    2015-02-01

    Full Text Available ABSTRACT Students find it difficult to master the hydraulic and pneumatic system due to the lack of imagination on the component movement. It affects students’ learningprocess on the hydraulic and pneumatic system application. In order to solve the problem, the lecturer of Mechatronics course used the Automation Studio application. This software was helpful to design various automations, such as combination of hydraulic system, pneumatic system, electric system, and PLC. The lecturing process and design simulation were conducted by using Automation Studio. In general, the students were so much helped by this program in mastering the theory and practice of hydraulic and Pneumatic. On the other hand, it was found some problem in applying the Automation Studio on the classroom. The problems were limited onthe menu option as well ason the technical aspects related to the number of the computer. The implications from the writers’ experience in using Automation Studio were there was an opportunity for computer programmer to create learningmedia/ software for certain competence which was relevant, accessible and applicable. Also, in case of software preparation, it should be conducted by the lecturers and the students before the learning process. Keywords: automation studio program, learning process, Pneumatic and hydraulic learning

  9. Enterovirus 71 3C protease cleaves a novel target CstF-64 and inhibits cellular polyadenylation.

    Directory of Open Access Journals (Sweden)

    Kuo-Feng Weng

    2009-09-01

    Full Text Available Identification of novel cellular proteins as substrates to viral proteases would provide a new insight into the mechanism of cell-virus interplay. Eight nuclear proteins as potential targets for enterovirus 71 (EV71 3C protease (3C(pro cleavages were identified by 2D electrophoresis and MALDI-TOF analysis. Of these proteins, CstF-64, which is a critical factor for 3' pre-mRNA processing in a cell nucleus, was selected for further study. A time-course study to monitor the expression levels of CstF-64 in EV71-infected cells also revealed that the reduction of CstF-64 during virus infection was correlated with the production of viral 3C(pro. CstF-64 was cleaved in vitro by 3C(pro but neither by mutant 3C(pro (in which the catalytic site was inactivated nor by another EV71 protease 2A(pro. Serial mutagenesis was performed in CstF-64, revealing that the 3C(pro cleavage sites are located at position 251 in the N-terminal P/G-rich domain and at multiple positions close to the C-terminus of CstF-64 (around position 500. An accumulation of unprocessed pre-mRNA and the depression of mature mRNA were observed in EV71-infected cells. An in vitro assay revealed the inhibition of the 3'-end pre-mRNA processing and polyadenylation in 3C(pro-treated nuclear extract, and this impairment was rescued by adding purified recombinant CstF-64 protein. In summing up the above results, we suggest that 3C(pro cleavage inactivates CstF-64 and impairs the host cell polyadenylation in vitro, as well as in virus-infected cells. This finding is, to our knowledge, the first to demonstrate that a picornavirus protein affects the polyadenylation of host mRNA.

  10. Microwave photonics

    CERN Document Server

    Lee, Chi H

    2013-01-01

    Microwave photonics continues to see rapid growth. The integration of optical fiber and wireless networks has become a commercial reality and is becoming increasingly pervasive. Such hybrid technology will lead to many innovative applications, including backhaul solutions for mobile networks and ultrabroadband wireless networks that can provide users with very high bandwidth services. Microwave Photonics, Second Edition systematically introduces important technologies and applications in this emerging field. It also reviews recent advances in micro- and millimeter-wavelength and terahertz-freq

  11. Fulfill Your Digital Preservation Goals with a Budget Studio

    Directory of Open Access Journals (Sweden)

    Yongli Zhou

    2016-04-01

    Full Text Available In order to fulfill digital preservation goals, many institutions use high-end scanners for in-house scanning of historical print and oversize materials. However, high-end scanners’ prices do not fit in many small institutions’ budget. As digital single-lens reflex (DSLR camera technologies advance and camera prices drop quickly, a budget photography studio can help to achieve institutions’ preservation goals.  This paper compares images delivered by a high-end overhead scanner and a consumer level DSLR camera, discusses pros and cons of using each method, demonstrates how to set up a cost efficient shooting studio, and presents a budget estimate for a studio.

  12. Rapid Application Development with OpenStudio: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Weaver, E.; Long, N.; Fleming, K.; Schott, M.; Benne, K.; Hale, E.

    2012-05-01

    This paper presents several case studies of rapidly implemented, audience-specific applications for whole building energy modeling and standards analysis. By tailoring each application to the audience and the task at hand, the required learning curve for new users was greatly reduced. Each case study used OpenStudio, the U.S. Department of Energy's middleware software development kit (SDK). OpenStudio provides an easy interface to the EnergyPlus whole building simulation engine, while extending its capability and providing higher-level functionality such as software interoperability, standards, analysis, and optimization. Each case study is unique in the technology employed to interface with OpenStudio as well as the methods used for user interaction and data presentation. Four case studies are presented.

  13. Professional Application Lifecycle Management with Visual Studio 2010

    CERN Document Server

    Gousset, Mickey; Krishnamoorthy, Ajoy

    2010-01-01

    Get up to speed on Application Lifecycle Management (ALM) with Visual Studio 2010 through a combination of hands-on instruction and deep-dives. Microsoft has packed a lot of brand new testing and modeling tools into Visual Studio 2010, tools that previously were available only to Microsoft internal development teams. Developers will appreciate the focus on practical implementation techniques and best practices. A team of Microsoft insiders provides a nuts-and-bolts approach. This Wrox guide is designed as both a step-by-step guide and a reference for modeling, designing, and coordinating softw

  14. Performing gender in the studio and postmodern musical

    OpenAIRE

    Charlton, Michael

    2012-01-01

    This essay explores two distinct historical periods in the Hollywood musical through a Butlerian reading of gender as a performance.  The two example films from the studio era, Howard Hawks’ Gentlemen Prefer Blondes (1953) and the restored version of George Cukor’s A Star is Born (1954), are contextualised not only within the studio system but through the constructed star personae of their leads—Marilyn Monroe and Judy Garland.  Baz Luhrmann’s Moulin Rouge! (2001) and Rob Marshall’s Chicago (...

  15. CST, an Herbal Formula, Exerts Anti-Obesity Effects through Brain-Gut-Adipose Tissue Axis Modulation in High-Fat Diet Fed Mice

    Directory of Open Access Journals (Sweden)

    AbuZar Ansari

    2016-11-01

    Full Text Available The brain, gut, and adipose tissue interact to control metabolic pathways, and impairment in the brain-gut-adipose axis can lead to metabolic disorders, including obesity. Chowiseungcheng-tang (CST, a herbal formulation, is frequently used to treat metabolic disorders. Here, we investigated the anti-obesity effect of CST and its link with brain-gut-adipose axis using C57BL/6J mice as a model. The animals were provided with a normal research diet (NRD or high-fat diet (HFD in absence or presence of CST or orlistat (ORL for 12 weeks. CST had a significant anti-obesity effect on a number of vital metabolic and obesity-related parameters in HFD-fed mice. CST significantly decreased the expression levels of genes encoding obesity-promoting neuropeptides (agouti-related peptide, neuropeptide Y, and increased the mRNA levels of obesity-suppressing neuropeptides (proopiomelanocortin, cocaine-and amphetamine-regulated transcript in the hypothalamus. CST also effectively decreased the expression level of gene encoding obesity-promoting adipokine (retinol-binding protein-4 and increased the mRNA level of obesity-suppressing adipokine (adiponectin in visceral adipose tissue (VAT. Additionally, CST altered the gut microbial composition in HFD groups, a phenomenon strongly associated with key metabolic parameters, neuropeptides, and adipokines. Our findings reveal that the anti-obesity impact of CST is mediated through modulation of metabolism-related neuropeptides, adipokines, and gut microbial composition.

  16. CST, an Herbal Formula, Exerts Anti-Obesity Effects through Brain-Gut-Adipose Tissue Axis Modulation in High-Fat Diet Fed Mice.

    Science.gov (United States)

    Ansari, AbuZar; Bose, Shambhunath; Yadav, Mukesh Kumar; Wang, Jing-Hua; Song, Yun-Kyung; Ko, Seong-Gyu; Kim, Hojun

    2016-11-11

    The brain, gut, and adipose tissue interact to control metabolic pathways, and impairment in the brain-gut-adipose axis can lead to metabolic disorders, including obesity. Chowiseungcheng-tang (CST), a herbal formulation, is frequently used to treat metabolic disorders. Here, we investigated the anti-obesity effect of CST and its link with brain-gut-adipose axis using C57BL/6J mice as a model. The animals were provided with a normal research diet (NRD) or high-fat diet (HFD) in absence or presence of CST or orlistat (ORL) for 12 weeks. CST had a significant anti-obesity effect on a number of vital metabolic and obesity-related parameters in HFD-fed mice. CST significantly decreased the expression levels of genes encoding obesity-promoting neuropeptides (agouti-related peptide, neuropeptide Y), and increased the mRNA levels of obesity-suppressing neuropeptides (proopiomelanocortin, cocaine-and amphetamine-regulated transcript) in the hypothalamus. CST also effectively decreased the expression level of gene encoding obesity-promoting adipokine (retinol-binding protein-4) and increased the mRNA level of obesity-suppressing adipokine (adiponectin) in visceral adipose tissue (VAT). Additionally, CST altered the gut microbial composition in HFD groups, a phenomenon strongly associated with key metabolic parameters, neuropeptides, and adipokines. Our findings reveal that the anti-obesity impact of CST is mediated through modulation of metabolism-related neuropeptides, adipokines, and gut microbial composition.

  17. Hydrogen generation and foaming during tests in the GFPS simulating DWPF operations with Tank 42 sludge and CST

    Energy Technology Data Exchange (ETDEWEB)

    Koopman, D.C.

    1999-12-08

    This report summarizes the pilot-scale research requested by the salt disposition team to examine the effect of crystalline silicotitanate (CST) resin with adsorbed noble metals on the maximum hydrogen generation rate produced during the DWPF melter feed preparation processes.

  18. A Cross-Cultural and Interdisciplinary Collaboration in a Joint Design Studio

    Science.gov (United States)

    Kim, Mi Jeong; Ju, Seo Ryeung; Lee, Lina

    2015-01-01

    A design studio is a critical venue for design students, as they are educated to develop design thinking and other skills through studio courses. This article introduces a design studio project in which Korean and Malaysian students worked jointly for one semester to design affordable urban housing. The Korean students were interior design majors…

  19. Best practices for system dynamics model design and construction with powersim studio.

    Energy Technology Data Exchange (ETDEWEB)

    Malczynski, Leonard A.

    2011-06-01

    This guide addresses software quality in the construction of Powersim{reg_sign} Studio 8 system dynamics simulation models. It is the result of almost ten years of experience with the Powersim suite of system dynamics modeling tools (Constructor and earlier Studio versions). It is a guide that proposes a common look and feel for the construction of Powersim Studio system dynamics models.

  20. Design Studios in Instructional Design and Technology: What Are the Possibilities?

    Science.gov (United States)

    Knowlton, Dave S.

    2016-01-01

    Design studios are an innovative way to educate Instructional Design and Technology (IDT) students. This article begins by addressing literature about IDT design studios. One conclusion from this literature is that IDT studios have been theoretically conceptualized. However, much of this conceptualization is insular to the field of IDT and only…

  1. Assessment Focus in Studio: What Is Most Prominent in Architecture, Art and Design?

    Science.gov (United States)

    de La Harpe, Barbara; Peterson, J. Fiona; Frankham, Noel; Zehner, Robert; Neale, Douglas; Musgrave, Elizabeth; McDermott, Ruth

    2009-01-01

    What can be learned about assessment from what educators in the creative practices focus their studio publications on? What should form the focus of assessment in architecture, art and design studios? In this article we draw on 118 journal articles on studio published over the last decade in three disciplines; architecture, art and design to…

  2. A multispecies comparison of the metazoan 3'-processing downstream elements and the CstF-64 RNA recognition motif

    Directory of Open Access Journals (Sweden)

    Hutchison Keith W

    2006-03-01

    Full Text Available Abstract Background The Cleavage Stimulation Factor (CstF is a required protein complex for eukaryotic mRNA 3'-processing. CstF interacts with 3'-processing downstream elements (DSEs through its 64-kDa subunit, CstF-64; however, the exact nature of this interaction has remained unclear. We used EST-to-genome alignments to identify and extract large sets of putative 3'-processing sites for mRNA from ten metazoan species, including Homo sapiens, Canis familiaris, Rattus norvegicus, Mus musculus, Gallus gallus, Danio rerio, Takifugu rubripes, Drosophila melanogaster, Anopheles gambiae, and Caenorhabditis elegans. In order to further delineate the details of the mRNA-protein interaction, we obtained and multiply aligned CstF-64 protein sequences from the same species. Results We characterized the sequence content and specific positioning of putative DSEs across the range of organisms studied. Our analysis characterized the downstream element (DSE as two distinct parts – a proximal UG-rich element and a distal U-rich element. We find that while the U-rich element is largely conserved in all of the organisms studied, the UG-rich element is not. Multiple alignment of the CstF-64 RNA recognition motif revealed that, while it is highly conserved throughout metazoans, we can identify amino acid changes that correlate with observed variation in the sequence content and positioning of the DSEs. Conclusion Our analysis confirms the early reports of separate U- and UG-rich DSEs. The correlated variations in protein sequence and mRNA binding sequences provide novel insights into the interactions between the precursor mRNA and the 3'-processing machinery.

  3. Strategies for application of learning theories in art studio practices ...

    African Journals Online (AJOL)

    This study highlights the link between learning theories and art studio practices. The paper is of the opinion that if these theories are critically understood and applied to the practical aspect of fine and applied arts then learning will be more functional. Nigerian Journal of Technology and Education in Nigeria Vol. 8(1) 2003: ...

  4. Daylight strategies for architectural studio facilities: the literature review

    Science.gov (United States)

    Othman, Muhammad Anas Bin; Azfahani Ahmad, Nur; Ajis, Azizah Md

    2017-05-01

    The implementation of daylighting strategies in buildings is a common aspect in architecture. However, due to the availability of inexpensive electricity, natural lighting strategies became insignificant, and been overlooked by designers. With the current concern over rapid increment on electricity cost, many designers now try to revitalized daylighting strategies in buildings. This includes educational buildings. In Malaysian cases, it is a norm that universities; especially during lecture and studio sessions, used artificial lighting throughout the day. Definitely, this is not parallel with the “green” aim made by the Government in the Malaysian Plan. Therefore, this paper aims to explore the impact of daylight strategies for educational studios in universities, by maximising the penetration of natural daylight into the space towards creating a more green-conducive studio. The paper review literature about the types, criteria and benefits of daylight strategies. This paper also presented a pilot study that has been performed in one university in Perak, Malaysia, by selecting architectural studios as the main subject.

  5. Social Work Learning Spaces: The Social Work Studio

    Science.gov (United States)

    Zufferey, Carole; King, Sue

    2016-01-01

    This paper explores the contribution of a physical learning space to student engagement in social work education. Drawing on a constructivist methodology, this paper examines the findings of a survey conducted with students and staff in a social work and human service programme about their experiences of a Social Work Studio learning space. The…

  6. Standing Sound Waves in Air with DataStudio

    Science.gov (United States)

    Kraftmakher, Yaakov

    2010-01-01

    Two experiments related to standing sound waves in air are adapted for using the ScienceWorkshop data-acquisition system with the DataStudio software from PASCO scientific. First, the standing waves are created by reflection from a plane reflector. The distribution of the sound pressure along the standing wave is measured. Second, the resonance…

  7. Addressing the ceramics studio equipment challenge in Nigeria ...

    African Journals Online (AJOL)

    It is already well established that ceramics require the use of equipment for production. Also well known is the fact that most ceramists in Nigeria are unable to procure and utilize major equipment for ceramics production due to the exorbitant prices of imported ceramics studio equipment and technology on which the country ...

  8. Design grammars as evaluation tools in the first year studio

    DEFF Research Database (Denmark)

    Ibrahim, Mohamed S.; Bridges, Alan; Chase, Scott Curland

    2012-01-01

    This paper describes a teaching experience conducted and carried out as part of the coursework of first year students. The workshop is the third of three workshops planned to take place during the course of the first year studio, aimed at introducing new ways of thinking and introducing students ...

  9. Experiencing design with grammatical explorations in the beginning design studio

    DEFF Research Database (Denmark)

    Ibrahim, Mohamed S.; Bridges, Alan; Chase, Scott Curland

    2011-01-01

    This paper describes a teaching experience conducted and carried out as part of the coursework of first year students of architecture in two different countries. The workshop is the second of three workshops planned to take place during the course of the first year studio, aimed at introducing ne...

  10. The "Tutorless" Design Studio: A Radical Experiment in Blended Learning

    Science.gov (United States)

    Hill, Glen Andrew

    2017-01-01

    This paper describes a pedagogical experiment in which a suite of novel blended learning strategies was used to replace the traditional role of design tutors in a first year architectural design studio. The pedagogical objectives, blended learning strategies and outcomes of the course are detailed. While the quality of the student design work…

  11. Peer assessment in graphic design studio: Communication design ...

    African Journals Online (AJOL)

    The purpose of this study was to examine students' perceptions of their attitudes during peer assessment practice in graphic design studio in higher education. The study was conducted with 94 students at the Kwame Nkrumah University of Science and Technology, Kumasi, Ghana. The results showed that the students had ...

  12. Studio in Art. A Comprehensive Foundation Course. Revised Edition.

    Science.gov (United States)

    New York State Education Dept., Albany. Bureau of Curriculum Development.

    Using the resources in this curriculum guide, teachers will be able to develop highly individualized programs of studio experiences that will meet the needs of interested students at all levels of secondary education. The guide suggests that students have direct contact with the various forms, dimensions, and media of the visual and plastic arts.…

  13. Group Dynamics in the Interior Design Studio: Student Perceptions

    Science.gov (United States)

    Hill, Caroline

    2008-01-01

    This article presents the findings of a study measuring the classroom climates in collegiate interior design studios and considers these findings within the group dynamics theory framework. Three groups of students completed the College Classroom Environment Scales (CCES) questionnaire. Five of the six CCES subscale F ratios were statistically…

  14. Group Projects in Interior Design Studio Classes: Peer Feedback Benefits

    Science.gov (United States)

    Jurado, Juan A.

    2011-01-01

    Group projects have been shown to be effective for providing peer feedback in classrooms. While students in regular enrollment classes benefit from peer feedback, low-enrollment classes face many challenges. This study compares peer feedback effectiveness between two interior design studio classes with different design projects. In one class,…

  15. Curiositas and Studiositas: Investigating Student Curiosity and the Design Studio

    Science.gov (United States)

    Smith, Korydon

    2011-01-01

    Curiosity is often considered the foundation of learning. There is, however, little understanding of how (or if) pedagogy in higher education affects student curiosity, especially in the studio setting of architecture, interior design and landscape architecture. This article provides a brief cultural history of curiosity and its role in the design…

  16. Ludic Toons: The Dynamics of Creative Play in Studio Animation

    Science.gov (United States)

    Power, Pat

    2012-01-01

    Though generally accepted as the most playfully entertaining form of popular media or art, animation as play has received little scholarly analysis. The author examines the nature of playfulness in animation and describes play as a critical tool in animation studies. Examining studio character animation from such perspectives as creative…

  17. Submission of art studio-based assignments: Students experience ...

    African Journals Online (AJOL)

    In this study, the reasons why art students are reluctant to complete their studio assignments on time are critically examined. Both quantitative and qualitative data, derived from survey and interviews were used to examine students' attitudes and investigate their experience. The study revealed that although procrastination is ...

  18. The Learning Design Studio in a 5-weeks MOOC format

    NARCIS (Netherlands)

    Garreta-Domingo, Muriel; Hernández-Leo, Davinia; Mor, Yishay; Sloep, Peter

    2018-01-01

    The present paper reports on a Massive Open Online Courses (MOOCs) for teacher professional development that uses the Learning Design Studio methodology as a pedagogical framework. It explains the training activities and supporting technologies used and discusses the findings obtained weekly from

  19. Cardboard Houses with Wings: The Architecture of Alabama's Rural Studio

    Science.gov (United States)

    Botz-Bornstein, Thorsten

    2010-01-01

    The Rural Studio, an outreach program of Auburn University, designs innovative houses for poor people living in Alabama's Hale County by using "junk" such as car windshields, carpet tiles, baled cardboard, and old license plates. The article theorizes this particular architecture in terms of Critical Regionalism, developed by…

  20. A Research Design for Studio-Based Research in Art

    Science.gov (United States)

    Marshall, Cora

    2010-01-01

    Studio-based research is rich with possibilities for contributing to the body of knowledge concerning creative processes, primarily because it has at its core the "making" disciplines. Nonetheless, for those who teach graduate research courses, this relative new mode of research can be challenging. In this article, the author discusses…

  1. In the Artist’s Studio with "L’Illustration"

    NARCIS (Netherlands)

    Esner, R.

    2013-01-01

    This article explores the two series of visits to the artist's studio that appeared in the famed French illustrated magazine L'Illustration in the 1850s and in 1886. An in-depth examination of both the texts and images reveals the verbal and visual tropes used to characterize the artists and their

  2. To Be Like Primrose: Understanding Tradition in a Viola Studio

    Science.gov (United States)

    Kedem, Yore

    2011-01-01

    Dealing with traditions is a central issue in music education. I investigate different perspectives on tradition by engaging in a local hermeneutic study surrounding an interpretive event from a viola studio. To understand the function of tradition in this event, I construct a theoretical perspective with roots in hermeneutics and educational…

  3. Developing Critical and Reflective Thinking in Art Studio Practice ...

    African Journals Online (AJOL)

    Developing Critical and Reflective Thinking in Art Studio Practice through Formative Portfolio Management: An Analysis of Pre-Service Art and Design Secondary School Teachers. Attwell Mamvuto. Abstract. No Abstract Available Zimbabwe Journal of Educational Research Vol.16(1) 2004: 29-52. Full Text: EMAIL FULL ...

  4. Rotational Critique System as a Method of Culture Change in an Architecture Design Studio: Urban Design Studio as Case Study

    Science.gov (United States)

    Fasli, Mukaddes; Hassanpour, Badiossadat

    2017-01-01

    In this century, all educational efforts strive to achieve quality assurance standards. Therefore, it will be naive to deny the existence of problems in architectural education. The current design studio critique method has been developed upon generations of students and educators. Architectural education is changing towards educating critical…

  5. Microwave Irradiation

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 3. Microwave Irradiation - Way to Eco-friendly, Green Chemistry. Rashmi Sanghi. General Article Volume 5 Issue 3 March 2000 pp 77-81. Fulltext. Click here to view fulltext PDF. Permanent link:

  6. The migration to the coast : the case of employees of Companhia Siderúrgica de Tubarão ( CST

    Directory of Open Access Journals (Sweden)

    Zanotelli, Claudio

    2000-12-01

    Full Text Available This text is a qualitative study of workers imigrants a large steel company ( the CST - Iron and Steel Company of Tubarão , localized aglommeration in Vitória. I tried to understand the migratory trajectories of part hiring employees to the compan,I described the origins of workers syntétiquement interviewed , their socio-economic and capital their various socio- profissionelles trajectories.

  7. The BARD1 C-Terminal Domain Structure and Interactions with Polyadenylation Factor CstF-50

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Ross A.; Lee, Megan S.; Tsutakawa, Susan E.; Williams, R. Scott; Tainer, John A.; Glover, J. N. Mark

    2009-07-13

    The BARD1 N-terminal RING domain binds BRCA1 while the BARD1 C-terminal ankyrin and tandem BRCT repeat domains bind CstF-50 to modulate mRNA processing and RNAP II stability in response to DNA damage. Here we characterize the BARD1 structural biochemistry responsible for CstF- 50 binding. The crystal structure of the BARD1 BRCT domain uncovers a degenerate phosphopeptide binding pocket lacking the key arginine required for phosphopeptide interactions in other BRCT proteins.Small angle X-ray scattering together with limited proteolysis results indicates that ankyrin and BRCT domains are linked by a flexible tether and do not adopt a fixed orientation relative to one another. Protein pull-down experiments utilizing a series of purified BARD1 deletion mutants indicate that interactions between the CstF-50 WD-40 domain and BARD1 involve the ankyrin-BRCT linker but do not require ankyrin or BRCT domains. The structural plasticity imparted by the ANK-BRCT linker helps to explain the regulated assembly of different protein BARD1 complexes with distinct functions in DNA damage signaling including BARD1-dependent induction of apoptosis plus p53 stabilization and interactions. BARD1 architecture and plasticity imparted by the ANK-BRCT linker are suitable to allow the BARD1 C-terminus to act as a hub with multiple binding sites to integrate diverse DNA damage signals directly to RNA polymerase.

  8. Introductory Physics Gender Gaps: Pre- and Post-Studio Transition

    Science.gov (United States)

    Kohl, Patrick B.; Kuo, H. Vincent

    2009-11-01

    Prior work has characterized the gender gaps present in college-level introductory physics courses. Such work has also shown that research-based interactive engagement techniques can reduce or eliminate these gender gaps. In this paper, we study the gender gaps (and lack thereof) in the introductory calculus-based electricity and magnetism course at the Colorado School of Mines. We present eight semesters' worth of data, totaling 2577 students, with four semesters preceding a transition to Studio physics, and four following. We examine gender gaps in course grades, DFW (D grade, fail, or withdrawal) rates, and normalized gains on the Conceptual Survey of Electricity and Magnetism (CSEM), and consider factors such as student ACT scores and grades in prior math classes. We find little or no gap in male/female course grades and DFW rates, but substantial gaps in CSEM gains that are reduced somewhat by the transition to Studio physics.

  9. From Princess to Punk: Digitisation in the Fashion Studio

    Directory of Open Access Journals (Sweden)

    Amy Robinson

    2014-07-01

    Full Text Available The Zandra Rhodes Digital Study Collection project was a unique collaborative venture between staff and students at the University for the Creative Arts (UCA and their Chancellor, the British fashion and textile designer Zandra Rhodes. Working within the designer’s private studio space, this initiative has developed the first digital record of her personal collection of garments and drawings, supported and enriched with behind-the-scenes video interviews and tutorials, for worldwide educational use. This paper examines the benefits and strategies for undertaking the project in situ within the designer’s private studio environment. It outlines the need for a bespoke, flexible approach to digitisation in the visual arts that respects the individuality and creativity of the artist, whilst drawing on established documentation standards and expertise from the library, archive and museum sector.

  10. OpenStudio: An Open Source Integrated Analysis Platform; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Guglielmetti, R.; Macumber, D.; Long, N.

    2011-12-01

    High-performance buildings require an integrated design approach for all systems to work together optimally; systems integration needs to be incorporated in the earliest stages of design for efforts to be cost and energy-use effective. Building designers need a full-featured software framework to support rigorous, multidisciplinary building simulation. An open source framework - the OpenStudio Software Development Kit (SDK) - is being developed to address this need. In this paper, we discuss the needs that drive OpenStudio's system architecture and goals, provide a development status report (the SDK is currently in alpha release), and present a brief case study that illustrates its utility and flexibility.

  11. Looks: Studio 54 and the Production of Fabulous Nightlife

    Directory of Open Access Journals (Sweden)

    madison alexander moore

    2013-05-01

    Full Text Available 0 0 1 92 528 yale university 4 1 619 14.0 Normal 0 false false false EN-US JA X-NONE This article combines my experience as a party-host and nightlife-creator with a close reading of Studio 54 as a theatrical production. I call for a consideration of how the staging of nightlife functions as an art form, relying on the dual practices of creation and curation. I provide a close reading of the tightly-staged Studio 54 experience, focusing on the club's infamously tight door policy and production of fabulousness to reveal what scholars and ethnographers of nightlife can learn from approaching nightlife as an artistic production. This approach can also inform a nightlife-focused research agenda.  

  12. Tactile Studio, artigianato digitale al servizio dell’accessibilità

    OpenAIRE

    Riccardo Leone; Philippe Moreau

    2017-01-01

    Tactile Studio is a design agency for universal design in arts and culture. Tactile experiences are essential for people with visual impairm ents and gr eatly assist many people with cognitive disabilities. Tactile experiences should be included in every exhibition. Children, older adults, people with language diff iculties or fr om diff erent cultural backgr ounds..To name an audience who will not benefit fr om these designs is impossible. Pioneers in France, the nation's top museums have en...

  13. The Army Game Studios Agile Process: A Retrospective

    Science.gov (United States)

    2012-04-26

    23-26, 2012 WWW.SSTC-ONLINE.ORG The Army Game Studio adopted Scrum because of a growing Team, growing Project sizes and the creation of a...Instructor Workstation • Vehicles • Dismount SYSTEMS & SOFTWARE TECHNOLOGY CONFERENCE APRIL 23-26, 2012 WWW.SSTC-ONLINE.ORG AAVP3 / Scrum ... Scrum was a process that fit our development style: – Requirements are never in stone, and most of the time are not completely known when funding occurs

  14. CREATIVITY METHODS IN TEACHING THE ARCH-DESIGN STUDIO

    Directory of Open Access Journals (Sweden)

    EIGBEONAN Andrew B.

    2013-07-01

    Full Text Available The aim of this paper is to search and find methods of fostering creativity or ideas relating to creativity in teaching the arch-design studio. Teaching creativity through its methods will be making the students grounded in designing with creativity ideas and therefore we can have professionals that design and build with satisfaction, safety and complementary. It means we can have real buildings and places that satisfy our clients, the society and in harmony with the environment. Although there are similarities in the curricula of training architects all over the world, but educators go about it in their own convenient and suitable ways and styles. The ideas of creativity have been part of architecture from the onset, but are not deligently applied and also not formally incorporated in the curricula of training. The topic is also very relevant and timely as arch-educators and other stakeholders are of the opinion that something has to be done to improve the ways and methods of training architects, especially the teaching of the arch-design studio with regards to creativity. Through exploration of literature and interviews (physical and telephone call this paper finds methods of stimulating creativity ideas in the teaching of arch-design studio. Some of the methods of motivating creativity found in teaching the arch-design studio are: analogy, metaphors, biomimicry, brainstorming, attribute listing, mental map, TRIZ, restrictions, charrette, browsing, excursions, focus groups, other peoples viewpoints, using crazy ideas, using experts, visualizing a goal, working with dreams and images and giving students design tools such as drawings CAD and model making.

  15. Duas décadas de Studio PANaroma

    Directory of Open Access Journals (Sweden)

    Flo Menezes

    2015-06-01

    Full Text Available este texto trata da história do Studio PANaroma, fundado em São Paulo em 1994 por Flo Menezes (1962, compositor e professor da Universidade Estadual Paulista (Unesp, que neste ano completa 20 anos de existência. Trata-se de um relato histórico do primeiro Estúdio Brasileiro de Música Eletroacústica nos moldes europeus.

  16. Parametric Design of Outdoor Broadcasting Studio Based on Schema Theory

    OpenAIRE

    Zhu Li; Zhang Nan; Qing Xiaoying

    2016-01-01

    This paper mainly demonstrates that the schema is an important way for the architect to cognize architecture form logic. It connects schema to algorithm of parametric design in order to seek the “algorithm schema” generation in parametric design of architecture. Meanwhile, this paper discusses the generative process and methods of the “algorithm schema” in parametric design of architecture by describing a case of outdoor broadcasting studio of Hunan Economic Radio. It also reveals the importa...

  17. Risk assessment of CST-7 proposed waste treatment and storage facilities Volume I: Limited-scope probabilistic risk assessment (PRA) of proposed CST-7 waste treatment & storage facilities. Volume II: Preliminary hazards analysis of proposed CST-7 waste storage & treatment facilities

    Energy Technology Data Exchange (ETDEWEB)

    Sasser, K.

    1994-06-01

    In FY 1993, the Los Alamos National Laboratory Waste Management Group [CST-7 (formerly EM-7)] requested the Probabilistic Risk and Hazards Analysis Group [TSA-11 (formerly N-6)] to conduct a study of the hazards associated with several CST-7 facilities. Among these facilities are the Hazardous Waste Treatment Facility (HWTF), the HWTF Drum Storage Building (DSB), and the Mixed Waste Receiving and Storage Facility (MWRSF), which are proposed for construction beginning in 1996. These facilities are needed to upgrade the Laboratory`s storage capability for hazardous and mixed wastes and to provide treatment capabilities for wastes in cases where offsite treatment is not available or desirable. These facilities will assist Los Alamos in complying with federal and state requlations.

  18. Risk assessment of CST-7 proposed waste treatment and storage facilities Volume I: Limited-scope probabilistic risk assessment (PRA) of proposed CST-7 waste treatment ampersand storage facilities. Volume II: Preliminary hazards analysis of proposed CST-7 waste storage ampersand treatment facilities

    International Nuclear Information System (INIS)

    Sasser, K.

    1994-06-01

    In FY 1993, the Los Alamos National Laboratory Waste Management Group [CST-7 (formerly EM-7)] requested the Probabilistic Risk and Hazards Analysis Group [TSA-11 (formerly N-6)] to conduct a study of the hazards associated with several CST-7 facilities. Among these facilities are the Hazardous Waste Treatment Facility (HWTF), the HWTF Drum Storage Building (DSB), and the Mixed Waste Receiving and Storage Facility (MWRSF), which are proposed for construction beginning in 1996. These facilities are needed to upgrade the Laboratory's storage capability for hazardous and mixed wastes and to provide treatment capabilities for wastes in cases where offsite treatment is not available or desirable. These facilities will assist Los Alamos in complying with federal and state requlations

  19. Development and properties of crystalline silicotitanate (CST) ion exchangers for radioactive waste applications

    International Nuclear Information System (INIS)

    Miller, J.E.; Brown, N.E.

    1997-04-01

    Crystalline silicotitanates (CSTs) are a new class of ion exchangers that were jointly invented by researchers at Sandia National Laboratories and Texas A ampersand M University. One particular CST, known as TAM-5, is remarkable for its ability to separate parts-per-million concentrations of cesium from highly alkaline solutions (pH> 14) containing high sodium concentrations (>5M). It is also highly effective for removing cesium from neutral and acidic solutions, and for removing strontium from basic and neutral solutions. Cesium isotopes are fission products that account for a large portion of the radioactivity in waste streams generated during weapons material production. Tests performed at numerous locations with early lab-scale TAM-5 samples established the material as a leading candidate for treating radioactive waste volumes such as those found at the Hanford site in Washington. Thus Sandia developed a Cooperative Research and Development Agreement (CRADA) partnership with UOP, a world leader in developing, commercializing, and supplying adsorbents and associated process technology to commercialize and further develop the material. CSTs are now commercially available from UOP in a powder (UOP IONSIV reg-sign IE-910 ion exchanger) and granular form suitable for column ion exchange operations (UOP IONSIV reg-sign IE-911 ion exchanger). These materials exhibit a high capacity for cesium in a wide variety of solutions of interest to the Department of Energy, and they are chemically, thermally, and radiation stable. They have performed well in tests at numerous sites with actual radioactive waste solutions, and are being demonstrated in the 100,000 liter Cesium Removal Demonstration taking place at Oak Ridge National Laboratory with Melton Valley Storage Tank waste. It has been estimated that applying CSTs to the Hanford cleanup alone will result in a savings of more than $300 million over baseline technologies

  20. Development and properties of crystalline silicotitanate (CST) ion exchangers for radioactive waste applications

    Energy Technology Data Exchange (ETDEWEB)

    Miller, J.E.; Brown, N.E.

    1997-04-01

    Crystalline silicotitanates (CSTs) are a new class of ion exchangers that were jointly invented by researchers at Sandia National Laboratories and Texas A&M University. One particular CST, known as TAM-5, is remarkable for its ability to separate parts-per-million concentrations of cesium from highly alkaline solutions (pH> 14) containing high sodium concentrations (>5M). It is also highly effective for removing cesium from neutral and acidic solutions, and for removing strontium from basic and neutral solutions. Cesium isotopes are fission products that account for a large portion of the radioactivity in waste streams generated during weapons material production. Tests performed at numerous locations with early lab-scale TAM-5 samples established the material as a leading candidate for treating radioactive waste volumes such as those found at the Hanford site in Washington. Thus Sandia developed a Cooperative Research and Development Agreement (CRADA) partnership with UOP, a world leader in developing, commercializing, and supplying adsorbents and associated process technology to commercialize and further develop the material. CSTs are now commercially available from UOP in a powder (UOP IONSIV{reg_sign} IE-910 ion exchanger) and granular form suitable for column ion exchange operations (UOP IONSIV{reg_sign} IE-911 ion exchanger). These materials exhibit a high capacity for cesium in a wide variety of solutions of interest to the Department of Energy, and they are chemically, thermally, and radiation stable. They have performed well in tests at numerous sites with actual radioactive waste solutions, and are being demonstrated in the 100,000 liter Cesium Removal Demonstration taking place at Oak Ridge National Laboratory with Melton Valley Storage Tank waste. It has been estimated that applying CSTs to the Hanford cleanup alone will result in a savings of more than $300 million over baseline technologies.

  1. Leveraging OpenStudio's Application Programming Interfaces: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Long, N.; Ball, B.; Goldwasser, D.; Parker, A.; Elling, J.; Davis, O.; Kruchten, D.

    2013-11-01

    OpenStudio development efforts have been focused on providing Application Programming Interfaces (APIs) where users are able to extend OpenStudio without the need to compile the open source libraries. This paper will discuss the basic purposes and functionalities of the core libraries that have been wrapped with APIs including the Building Model, Results Processing, Advanced Analysis, UncertaintyQuantification, and Data Interoperability through Translators. Several building energy modeling applications have been produced using OpenStudio's API and Software Development Kits (SDK) including the United States Department of Energy's Asset ScoreCalculator, a mobile-based audit tool, an energy design assistance reporting protocol, and a portfolio scale incentive optimization analysismethodology. Each of these software applications will be discussed briefly and will describe how the APIs were leveraged for various uses including high-level modeling, data transformations from detailed building audits, error checking/quality assurance of models, and use of high-performance computing for mass simulations.

  2. Cultural schema and design activity in an architectural design studio

    Directory of Open Access Journals (Sweden)

    Gökçe Ketizmen Önal

    2017-06-01

    Full Text Available Research on the cognitive activities and on the structure and quality of knowledge flow involved in architectural design education is increasing. These studies generally focus on the interaction between student and instructor, including processes such as producing ideas, solving display problems, and integrating design strategies. These studies commonly include computational evaluations and confirmation of the coding of knowledge. They may also include the determination of designer׳s thoughts and cognitive actions of design process, as well as the analysis and digitization of verbal protocols during the design process. In most of these studies, the designer׳s cultural and psychological components are not considered. Accordingly, research on the effects of designers’ cultural schema on design activity in design studios is limited. This study aimed to solve this problem by analyzing the relationship between design activity and the designer׳s cultural schema in a design studio. We performed an experimental study based on a specific conceptual framework and a research model aimed at identifying the relationships among cultural schemas, the architectural design process, and design studios.

  3. Cloud-Based Model Calibration Using OpenStudio: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Hale, E.; Lisell, L.; Goldwasser, D.; Macumber, D.; Dean, J.; Metzger, I.; Parker, A.; Long, N.; Ball, B.; Schott, M.; Weaver, E.; Brackney, L.

    2014-03-01

    OpenStudio is a free, open source Software Development Kit (SDK) and application suite for performing building energy modeling and analysis. The OpenStudio Parametric Analysis Tool has been extended to allow cloud-based simulation of multiple OpenStudio models parametrically related to a baseline model. This paper describes the new cloud-based simulation functionality and presents a model cali-bration case study. Calibration is initiated by entering actual monthly utility bill data into the baseline model. Multiple parameters are then varied over multiple iterations to reduce the difference between actual energy consumption and model simulation results, as calculated and visualized by billing period and by fuel type. Simulations are per-formed in parallel using the Amazon Elastic Cloud service. This paper highlights model parameterizations (measures) used for calibration, but the same multi-nodal computing architecture is available for other purposes, for example, recommending combinations of retrofit energy saving measures using the calibrated model as the new baseline.

  4. The Creative Studio Practice of Contemporary Dance Music Sampling Composers

    Directory of Open Access Journals (Sweden)

    Justin Morey

    2014-06-01

    Full Text Available This paper seeks to investigate some of the considerations that inform and help to determine the creative studio practice of contemporary sampling composers. Collaborative writing and production, specifically the co-opted collaboration implicit in using samples, will be assessed to consider those aspects of the production process which the participants consider to be authorial. These considerations include acts of listening, selecting and editing. In examining these matters this paper places emphasis on how sampling composers actively constrain their options in order to promote a creative relationship with their musical material. Techniques such as, firstly, traditional sample manipulation, secondly, the use of a sample as an initial building block for a composition from which the sample is then removed and, finally, live performance in the studio which is subsequently cut up and treated as a sample, will be discussed. Case studies, in the form of semi-structured interviews with sampling composers, will be drawn upon to assess approaches to and views about these forms of studio composition.

  5. Interdisciplinary Design Studio Education: Place through the activity of play

    Directory of Open Access Journals (Sweden)

    Fatos Adiloglu

    2011-09-01

    Full Text Available This paper discusses the activity of play in design education among university students with interdisciplinary background. The study subscribes to social theories of learning and takes into account an international summer school which brought visual communication design and architecture students and instructors together at the intersection of design in Istanbul asking such questions: How can student learning activity in design education are fostered? How can studio experience be formulated to cultivate the understanding of place? In this study the international group acted as a learning community. Istanbul served at her best offering her potential for making connections through exploration and discovery. The paper casts student tasks formulated as playful graphic expression and reflects student statements, unfolding connections made across filters of space, time and movement in the working process of visual design studio. The particular design studio experiences uncover how students reconstructed their own texts. The study as a result releases the fact that one might best come to know a place through the activity of play and this kind of knowing is one that constantly evolving.

  6. Microwave power engineering applications

    CERN Document Server

    Okress, Ernest C

    2013-01-01

    Microwave Power Engineering, Volume 2: Applications introduces the electronics technology of microwave power and its applications. This technology emphasizes microwave electronics for direct power utilization and transmission purposes. This volume presents the accomplishments with respect to components, systems, and applications and their prevailing limitations in the light of knowledge of the microwave power technology. The applications discussed include the microwave heating and other processes of materials, which utilize the magnetron predominantly. Other applications include microwave ioni

  7. Advances in microwaves 8

    CERN Document Server

    Young, Leo

    2013-01-01

    Advances in Microwaves, Volume 8 covers the developments in the study of microwaves. The book discusses the circuit forms for microwave integrated circuits; the analysis of microstrip transmission lines; and the use of lumped elements in microwave integrated circuits. The text also describes the microwave properties of ferrimagnetic materials, as well as their interaction with electromagnetic waves propagating in bounded waveguiding structures. The integration techniques useful at high frequencies; material technology for microwave integrated circuits; specific requirements on technology for d

  8. Invasion suppressor cystatin E/M (CST6): High-level cell type-specific expression in normal brain and epigenetic silencing in gliomas

    Science.gov (United States)

    Qiu, Jingxin; Ai, Lingbao; Ramachandran, Cheppail; Yao, Bing; Gopalakrishnan, Suhasni; Fields, C. Robert; Delmas, Amber L.; Dyer, Lisa M.; Melnick, Steven J.; Yachnis, Anthony T.; Schwartz, Philip H.; Fine, Howard A.; Brown, Kevin D.; Robertson, Keith D.

    2008-01-01

    DNA hypermethylation mediated gene silencing is a frequent and early contributor to aberrant cell growth and invasion in cancer. Malignant gliomas are the most common primary brain tumors in adults and the second most common tumor in children. Morbidity and mortality are high in glioma patients because tumors are resistant to treatment and are highly invasive into surrounding brain tissue rendering complete surgical resection impossible. Invasiveness is regulated by the interplay between secreted proteases (e.g. cathepsins) and their endogenous inhibitors (cystatins). In our previous studies we identified cystatin E/M (CST6) as a frequent target of epigenetic silencing in glioma. Cystatin E/M is a potent inhibitor of cathepsin B, which is frequently over-expressed in glioma. Here we study the expression of cystatin E/M in normal brain and show that it is highly and moderately expressed in oligodendrocytes and astrocytes, respectively, but not in neurons. Consistent with this, the CST6 promoter is hypomethylated in all normal samples using methylation specific PCR, bisulfite genomic sequencing, and pyrosequencing. In contrast, 78% of 28 primary brain tumors demonstrated reduced/absent cystatin E/M expression using a tissue microarray and this reduced expression correlated with CST6 promoter hypermethylation. Interestingly, CST6 was expressed in neural stem cells (NSC) and markedly induced upon differentiation, while a glioma tumor initiating cell (TIC) line was completely blocked for CST6 expression by promoter methylation. Analysis of primary pediatric brain tumor-derived lines also showed CST6 downregulation and methylation in nearly 100% of 12 cases. Finally, ectopic expression of cystatin E/M in glioma lines reduced cell motility and invasion. These results demonstrate that epigenetic silencing of CST6 is frequent in adult and pediatric brain tumors and occurs in TICs, which are thought to give rise to the tumor. CST6 methylation may therefore represent a novel

  9. THE CREATIV PRINCIPLS OF Y.B. VAKHTANGOV IN PRACTICE OF MODERN STUDIO THEATER

    Directory of Open Access Journals (Sweden)

    Elena Petrovna Shevchenko

    2014-11-01

    Full Text Available Studio theaters at which origins K. S. Stanislavsky and his disciples Y. B. Vakhtangov, М. А. Chekhov, V. E. Meyerhold played an important part in development of the Russian theater. Saratov was also marked as the city where during the third period of studio movement (the 80-90th years there were theaters studios. Nowadays the theater studio is distinguished from them at Balaganchik theater. Vakhtangov's rules are successfully realized by the director and actors of this theater studio. Vakhtangov's pedagogical experience, his rules of the organization and existence of studio, the birth of theater from  studio, the principles of education and training of the actor are very modern today. This article is devoted to application of the creative principles of Vakhtangov at studio theater at the Saratov theater "Balaganchik".In conclusions is noted that the rules of the master, his way to organize performance become irreplaceable for the modern artist, which try to understand and transform the reality through creativity. Creative rules of Vakhtangov are successfully realized in creative activity of theater studio at the Saratov theater "Balaganchik".

  10. FY1995 development of the landscape design studio; 1995 nendo jiritsu bunsan kyochogata 'keikan studio' no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    Establish a distributed design studio called 'The Landscape Studio' for designing and analyzing landscape collaboratively under Internet and multimedia computer environment. We first proposed a concept called 'Open Designing' for design works under information environment, which is composed of three kind of openness: open data, open processes, and open discussion. Based on the concept a landscape studio has been established as a total design system towards the forthcoming network and multimedia age. In the studio, a large volume of maps, images and other data are stored in the form accessible through the Internet. Using the data of several study areas, including Omotesandou street, Block 10 of Azabu, computer simulations, design games, VRML, CAVE and many other designing support tools have been developed the studio. Furthermore, the research team joined the activities of the Angkor Wat Safeguarding Project supported by UNESCO and the Japanese government. The locations and shapes of ruins in a wide area were (measured and simulated in a 3 dimensional style. The researches of Landscape Studio were reported at several exhibitions such as 'The 2nd Exhibition on Computer Aided Architectural Design' and 'The 11th Exhibition on Architecture, City and Computer'. The multimedia systems and experiments in the studio lead the field of multimedia urban and landscape design, and the research activities have greatly contributed to the education and industry of urban design. (NEDO)

  11. STUDIO DEL TERREMOTO DELLE ISOLE LIPARI DEL 13 APRILE 1938

    Directory of Open Access Journals (Sweden)

    P. CALOI

    1951-06-01

    Full Text Available È la prima parte di uno studio riguardante un terremoto ad ipocentroprofondo verificatosi nel Tirreno Meridionale. Dopo' una brevediscussione sui terremoti ad origine profonda in rapporto con la geologiasuperficiale e profonda, viene fatta una esposizione critica deimetodi che sono stati qui usati per la determinazione delle coordinatespazio-temporali. Viene confermata la profondità di 300 km, eccezionaleper il Mediterraneo. L'epicentro risulta situato sull'allineamentodella fascia vulcanica attiva, che va dal Vesuvio all'Etna, in una regionesede di una cospicua anomalia isostatica positiva.

  12. Atelje Zore Petrović / Zora Petrovic’s studio

    Directory of Open Access Journals (Sweden)

    Jasmina Čubrilo

    2012-12-01

    Full Text Available The big oil on canvas in the studio from 1941, and small, undated, double-sided tempera on the paper of the same name are complex images that define the horizon of Zora Petrović’s art world – different social, art, ideological discourses intertwine on its surfaces. These images reflect overlapping the private and public sphere, different power positions inside this overlapping and within the local art world of that time such as female artist vs. male art collector; female artist vs. male artist, female artist vs. male artist; female artist vs. female model, female artist/worker vs. female (upper middle class possible amateur. Broad strokes and colour, which, in the sense of matter that Petrović used to cover her canvases, to (almost all critics manifest the quality of wild expression mostly seen as a “masculine approach” and manly strength, actually, possess the quality of untamed fluidity that breaks down the psychic barriers between the inner and the outer being, as well as the barriers between the self and the other. It would appear that all these critics, by reading this manly method into her work, actually projected their fear of the abject, of the horror of the impure, unsymbolised, as if they to present that surplus in language, to present its inexpressibility, in language after all, and thus make it an integral part of the symbolic network. Also, probably for the same reason, critics found it necessary to describe and rationalise her disorderly studio, the brushes that she did not wash with water, the palettes underneath the layers of dried paint, as a consequence of her total dedication to her sublime task of creating uniquely valuable objects, which prevented her from dealing with such trifling, feminine tasks as keeping her working area orderly and clean. In that way the new signifying network was produced, the one that recognizes Zora’s studio in the metonymic series: studio, the surface of painting, female nude and her

  13. Java Analysis Studio and the hep.lcd class library

    Energy Technology Data Exchange (ETDEWEB)

    Ronan, M.T.

    2000-02-14

    The Java Analysis Studio and the hep.lcd class library provide a general framework for performing Java-based Linear Collider Detector (LCD) studies. The package is being developed to fully reconstruct 500 GeV to 1.5 TeV e{sup +}e{sup {minus}} annihilation events for analyzing detector options and performance. The current North American LCD reconstruction effort is aimed at comparing different detailed detector models by performing full detector simulation and reconstruction. This paper describes the JAS/hep.lcd distributed analysis framework and some aspects of the reconstruction and analysis object modeling.

  14. Studio di Architetture e Protocolli per Reti Ottiche

    CERN Document Server

    Cucchi, R; Raffaelli, C; Vistoli, C

    1999-01-01

    Le reti ottiche basate sulla tecnologia WDM (Wavelength Division Multiplexing) sono molto promettenti per rispondere non solo alle esigenze di capacit trasmissiva ma anche per la realizzazione di reti costituite da apparati $9 esclusivamente ottici dove la lunghezza d¹onda rappresenta il circuito di comunicazione fra nodo sorgente e nodo destinatario.Questo documento prende in esame il ³trigger di II livello dell¹esperimento ATLAS come case study², ne $9 analizza le esigenze di trasmissione dei dati e descrive uno studio di fattibilit basato su una rete ottica a stella.

  15. Razvoj mobilne aplikacije "RunApp" v okolju Android Studio

    OpenAIRE

    Obran, Damir

    2016-01-01

    V diplomski nalogi smo predstavili mobilno platformo Android in razvojno okolje Android Studio. Izdelali smo mobilno aplikacijo “RunApp” za pametne telefone. Namenjena je predvsem rekreativnim tekačem za spremljanje tekaškega treninga (čas, razdalja, trenutna hitrost, povprečna hitrost, tempo in kalorije). Aplikacija omogoča tudi meritev Cooperjevega testa, s katerim lahko ocenimo maksimalno porabo kisika VO2 max. Maksimalna poraba kisika nam pove funkcionalno sposobnost športnikov, oziroma n...

  16. A preliminary attempt to identify Ruben's studio practice

    DEFF Research Database (Denmark)

    Wadum, Jørgen

    1996-01-01

    Paintings in the style of P.P. Rubens have been examined with the aid od infrared reflectography. It is being proposed that certain phenomena along the contours of large scale Rubens-like figures in two mythological paintings could be ascribed as final corrections made by Rubens himself. Similar...... corrections have been observed in a painting by Rubens as well as in his drawings. Based on this it is being suggested that paintings in the "Style of Rubens" showing these types of corrections may be re-attributed to "Studio of Ruben", adding to our understanding of the large output of paintings from...

  17. TaC Studios New Construction Test House

    Energy Technology Data Exchange (ETDEWEB)

    Butler, T. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Curtis, O. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Kim, E. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Roberts, S. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Stephenson, R. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States)

    2013-03-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA, in the mixed humid climate zone. This home will serve as a model home for the builder partner and addresses Building America energy savings targets through the planning and implementation of a design package will serve as a basis of design for the builder partner’s future homes. As a BA test house, this home will be evaluated to detail whole house energy use, end use loads, and HVAC and hot water efficiency.

  18. Parametric Design of Outdoor Broadcasting Studio Based on Schema Theory

    Directory of Open Access Journals (Sweden)

    Zhu Li

    2016-01-01

    Full Text Available This paper mainly demonstrates that the schema is an important way for the architect to cognize architecture form logic. It connects schema to algorithm of parametric design in order to seek the “algorithm schema” generation in parametric design of architecture. Meanwhile, this paper discusses the generative process and methods of the “algorithm schema” in parametric design of architecture by describing a case of outdoor broadcasting studio of Hunan Economic Radio. It also reveals the importance of “algorithm schema” for the cognition and architectural form logic generation.

  19. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  20. Student Response to an Internet-Mediated Industrial Design Studio Course

    Science.gov (United States)

    Chen, Wenzhi; You, Manlai

    2010-01-01

    The purpose of this study is to investigate student attitudes towards and perceptions of using the Internet and information technology to mediate a design studio course and to propose guidelines and suggestions for developing Internet-mediated design studio courses. Two classes of third-year undergraduate industrial design students in two…

  1. Artful Surfaces: An Ethnographic Study Exploring the Use of Space in Design Studios

    NARCIS (Netherlands)

    Vyas, Dhaval; Malmborg, L.; Nijholt, Antinus; Sussner, J.

    2012-01-01

    Alargely overlooked aspect of creative design practices is how physical space in design studios plays a role in supporting designers’ everyday work. In particular, studio surfaces such as designers’ desks, office walls, notice boards, clipboards and drawing boards are full of informative,

  2. Design Students Perspectives on Assessment Rubric in Studio-Based Learning

    Science.gov (United States)

    Eshun, Eric F.; Osei-Poku, Patrick

    2013-01-01

    This study examined students' perspectives on the use of assessment criteria and rubrics in graphic design studio at Kwame Nkrumah University of Science and Technology, Ghana. This assessment strategy was introduced with the desire to improve students' participation and involvement in studio-based learning programme. At the end of the semester, a…

  3. Investigating the Experiential Impact of Sensory Affect in Contemporary Communication Design Studio Education

    Science.gov (United States)

    Marshalsey, Lorraine

    2015-01-01

    The studio is the primary site for learning in specialist Communication Design education worldwide. Differing higher education institutions, including art schools and university campuses, have developed a varied range of studio environments. These diverse learning spaces inherently create a complex fabric of affects. In addition, Communication…

  4. The Technique of the Sound Studio: Radio, Record Production, Television, and Film. Revised Edition.

    Science.gov (United States)

    Nisbett, Alec

    Detailed explanations of the studio techniques used in radio, record, television, and film sound production are presented in as non-technical language as possible. An introductory chapter discusses the physics and physiology of sound. Subsequent chapters detail standards for sound control in the studio; explain the planning and routine of a sound…

  5. Lessons Learned from Web-Enhanced Teaching in Landscape Architecture Studios

    Science.gov (United States)

    Li, Ming-Han

    2007-01-01

    The purpose of this article was to summarize lessons learned from implementing web-enhanced teaching in landscape architecture studio courses. The lessons are documented as challenges and opportunities based on a two-year assessment study of web-enhanced landscape architecture construction studios. This article will help landscape architecture…

  6. Effects of Studio Space on Teaching and Learning: Preliminary Findings from Two Case Studies

    Science.gov (United States)

    Taylor, Summer Smith

    2009-01-01

    Recognizing that traditional classrooms do not facilitate active learning, colleges and universities are increasingly converting traditional classroom space into studio space. Research indicates positive effects on student learning when studio classroom space is combined with active learning pedagogy, but the research does not separate the effect…

  7. Formalizing the First Day in an Organic Chemistry Laboratory Using a Studio-Based Approach

    Science.gov (United States)

    Collison, Christina G.; Cody, Jeremy; Smith, Darren; Swartzenberg, Jennifer

    2015-01-01

    A novel studio-based lab module that incorporates student-centered activities was designed and implemented to introduce second-year undergraduate students to the first-semester organic chemistry laboratory. The "First Day" studio module incorporates learning objectives for the course, lab safety, and keeping a professional lab notebook.

  8. Designing a Utopia: An Architectural Studio Experience on David Harvey's "Edilia"

    Science.gov (United States)

    Yesilkaya, Nese Gurallar

    2008-01-01

    The design of a utopia was devised as a studio project in order to bring critical thinking into the design studio and to stimulate creativity. By suggesting a utopia, the pedagogical aim was to improve progressive thinking and critical thought in the design education of architectural students -- and also future architects. From this perspective,…

  9. Current attitudes toward voice studio teaching technology: a bicoastal survey of classical singing pedagogues.

    Science.gov (United States)

    Barnes-Burroughs, Kathryn; Lan, William Y; Edwards, Elizabeth; Archambeault, Noël

    2008-09-01

    In recent years, the availability of studio teaching technology tools for the classical singing studio has developed exponentially. Nevertheless, the integration of voice analysis technology and other computer-based technology into a traditional classical singing studio can be a daunting task for many teachers, despite fine instructional texts such as those of Garyth Nair (1999) and Scott McCoy (2004). For this reason, The Texas Tech Voice Alliance developed and assessed a bicoastal online survey of classical singing pedagogues in the United States about their perceptions of, and attitudes toward, the use of studio teaching technology. The purpose of this study was to investigate the current use of this technology and to assess the readiness of these teachers to explore further its possible benefits. Subjects were asked to rank relevant factors associated with voice studio teaching technology in the classical singing studio and respond to questions using calibrated judgment scales. Discussion focuses on descriptive survey results and analyses, including agreement and disagreement between classical singing pedagogues regarding real or perceived uses and future benefits of voice studio teaching technology in their studio programs. Results of this survey provide data on which to base future studies. Building on the record of existing software and related literature, and through ongoing research, this team ultimately intends to expand the survey group and use the results to guide us in further development of user-friendly computer-based technology.

  10. The "Right Kind of Telling": Knowledge Building in the Academic Design Studio

    Science.gov (United States)

    Cennamo, Katherine; Brandt, Carol

    2012-01-01

    Studio-based instruction, as traditionally enacted in design disciplines such as architecture, product design, graphic design, and the like, consists of dedicated desk space for each student, extended time blocks allocated to studio classes, and classroom interactions characterized by independent and group work on design problems supplemented by…

  11. Integrating Blended and Problem-Based Learning into an Architectural Housing Design Studio: A Case Study

    Science.gov (United States)

    Bregger, Yasemin Alkiser

    2017-01-01

    This paper presents how a blended learning pedagogic model is integrated into an architectural design studio by adapting the problem-based learning process and housing issues in Istanbul Technical University (ITU), during fall 2015 and spring 2016 semesters for fourth and sixth level students. These studios collaborated with the "Introduction…

  12. Explorations in Teaching Sustainable Design: A Studio Experience in Interior Design/Architecture

    Science.gov (United States)

    Gurel, Meltem O.

    2010-01-01

    This article argues that a design studio can be a dynamic medium to explore the creative potential of the complexity of sustainability from its technological to social ends. The study seeks to determine the impact of an interior design/architecture studio experience that was initiated to teach diverse meanings of sustainability and to engage the…

  13. Community Informatics Studio: Designing Experiential Learning to Support Teaching, Research, and Practice

    Science.gov (United States)

    Wolske, Martin; Rhinesmith, Colin; Kumar, Beth

    2014-01-01

    This paper introduces a model of experiential learning to support teaching, research, and practice in library and information science (LIS). The concept we call "Community Informatics (CI) Studio" uses studio-based learning (SBL) to support enculturation into the field of CI. The SBL approach, closely related to John Dewey's…

  14. The Perceptions of Piano Teachers Regarding the Inclusion of Children with Disabilities in the Piano Studio

    Science.gov (United States)

    Martiros, Melissa

    2012-01-01

    The purpose of this study was to begin to examine the factors that contribute to the inclusion and exclusion of children with disabilities in piano lessons in private studios. Specifically, using a qualitative approach. the perceptions piano teachers have regarding the inclusion of children with disabilities in the piano studio were studied. The…

  15. Artist as Change Agent: A Pedagogy of Practice in Artist Proof Studio

    Science.gov (United States)

    Berman, Kim

    2012-01-01

    In this article, the author discusses how art, politics, and life intersect in a South African community visual arts studio program that seeks to educate artists as change agents. Artist Proof Studio (APS) was founded in 1991 and responded to the challenge of building democracy in a postapartheid South Africa. It is a community art center in…

  16. The Traditional Non-Traditional Landscape Architecture Studio: Education through Service Learning in Miami, OK

    Science.gov (United States)

    Loon, Leehu

    2010-01-01

    This research will illustrate the importance of a recent service learning project that was conducted for Miami, Oklahoma, by landscape architecture graduate students and faculty of the University of Oklahoma. Students and faculty partnered with the community to form the studio design team. Education in the landscape architecture studio at the…

  17. Envision and Observe: Using the Studio Thinking Framework for Learning and Teaching in Digital Arts

    Science.gov (United States)

    Sheridan, Kimberly M.

    2011-01-01

    The Studio Thinking Framework (STF) focuses on habits of mind taught through studio arts rather than disciplinary content or media-specific techniques. It is well suited to integrate studies of arts learning and teaching in a range of contexts, and it provides a framework for understanding how visual arts participation is dramatically changing…

  18. Bombs Away: Visual Thinking and Students' Engagement in Design Studios Contexts

    Science.gov (United States)

    Chamorro-Koc, Marianella; Scott, Andrew; Coombs, Gretchen

    2015-01-01

    In design studio, sketching or visual thinking is part of processes that assist students to achieve final design solutions. At Queensland University of Technology's (QUT's) First and Third Year industrial design studio classes we engage in a variety of teaching pedagogies from which we identify "Concept Bombs" as instrumental in the…

  19. Adapted Verbal Feedback, Instructor Interaction and Student Emotions in the Landscape Architecture Studio

    Science.gov (United States)

    Smith, Carl A.; Boyer, Mark E.

    2015-01-01

    In light of concerns with architectural students' emotional jeopardy during traditional desk and final-jury critiques, the authors pursue alternative approaches intended to provide more supportive and mentoring verbal assessment in landscape architecture studios. In addition to traditional studio-based critiques throughout a semester, we provide…

  20. The impact of individual Cognitive Stimulation Therapy (iCST on cognition, quality of life, caregiver health, and family relationships in dementia: A randomised controlled trial.

    Directory of Open Access Journals (Sweden)

    Martin Orrell

    2017-03-01

    Full Text Available Cognitive stimulation therapy (CST is a well-established group psychosocial intervention for people with dementia. There is evidence that home-based programmes of cognitive stimulation delivered by family caregivers may benefit both the person and the caregiver. However, no previous studies have evaluated caregiver-delivered CST. This study aimed to evaluate the effectiveness of a home-based, caregiver-led individual cognitive stimulation therapy (iCST program in (i improving cognition and quality of life (QoL for the person with dementia and (ii mental and physical health (well-being for the caregiver.A single-blind, pragmatic randomised controlled trial (RCT was conducted at eight study sites across the United Kingdom. The intervention and blinded assessment of outcomes were conducted in participants' homes. Three hundred fifty-six people with mild to moderate dementia and their caregivers were recruited from memory services and community mental health teams (CMHTs. Participants were randomly assigned to iCST (75, 30-min sessions or treatment as usual (TAU control over 25 wk. iCST sessions consisted of themed activities designed to be mentally stimulating and enjoyable. Caregivers delivering iCST received training and support from an unblind researcher. Primary outcomes were cognition (Alzheimer's Disease Assessment Scale-cognitive [ADAS-Cog] and self-reported QoL (Quality of Life Alzheimer's Disease [QoL-AD] for the person with dementia and general health status (Short Form-12 health survey [SF-12] for the caregiver. Secondary outcomes included quality of the caregiving relationship from the perspectives of the person and of the caregiver (Quality of the Carer Patient Relationship Scale and health-related QoL (European Quality of Life-5 Dimensions [EQ-5D] for the caregiver. Intention to treat (ITT analyses were conducted. At the post-test (26 wk, there were no differences between the iCST and TAU groups in the outcomes of cognition (mean

  1. The impact of individual Cognitive Stimulation Therapy (iCST) on cognition, quality of life, caregiver health, and family relationships in dementia: A randomised controlled trial

    Science.gov (United States)

    Leung, Phuong; Whitaker, Chris; Burns, Alistair; Knapp, Martin; Leroi, Iracema; Spector, Aimee; Roberts, Steven; de Waal, Hugo; Orgeta, Vasiliki

    2017-01-01

    Background Cognitive stimulation therapy (CST) is a well-established group psychosocial intervention for people with dementia. There is evidence that home-based programmes of cognitive stimulation delivered by family caregivers may benefit both the person and the caregiver. However, no previous studies have evaluated caregiver-delivered CST. This study aimed to evaluate the effectiveness of a home-based, caregiver-led individual cognitive stimulation therapy (iCST) program in (i) improving cognition and quality of life (QoL) for the person with dementia and (ii) mental and physical health (well-being) for the caregiver. Methods and findings A single-blind, pragmatic randomised controlled trial (RCT) was conducted at eight study sites across the United Kingdom. The intervention and blinded assessment of outcomes were conducted in participants’ homes. Three hundred fifty-six people with mild to moderate dementia and their caregivers were recruited from memory services and community mental health teams (CMHTs). Participants were randomly assigned to iCST (75, 30-min sessions) or treatment as usual (TAU) control over 25 wk. iCST sessions consisted of themed activities designed to be mentally stimulating and enjoyable. Caregivers delivering iCST received training and support from an unblind researcher. Primary outcomes were cognition (Alzheimer’s Disease Assessment Scale–cognitive [ADAS-Cog]) and self-reported QoL (Quality of Life Alzheimer’s Disease [QoL-AD]) for the person with dementia and general health status (Short Form-12 health survey [SF-12]) for the caregiver. Secondary outcomes included quality of the caregiving relationship from the perspectives of the person and of the caregiver (Quality of the Carer Patient Relationship Scale) and health-related QoL (European Quality of Life–5 Dimensions [EQ-5D]) for the caregiver. Intention to treat (ITT) analyses were conducted. At the post-test (26 wk), there were no differences between the iCST and TAU groups

  2. Musicality as Distributed Cognition in a Dance Studio

    Directory of Open Access Journals (Sweden)

    Dafne Muntanyola-Saura

    2016-05-01

    Full Text Available Musicality in dance does not need music. ¿How is musicality apparent in the dance studio, and to what extent is a social construct? We define musicality as a social skill. We analize how dancers share their artistic judgement when narrating the choreographical tasks that take place when rehearsing a new piece. Our claim for this paper is that musicality is part of a vocabulary of motives as artistic justification. As a social skill, musicality relies on two other social skills, listening and fisicality. To capture the variability of the phenomenon, we have observed what happens when the choreographer gives instructions and directs a rehearsal within a cognitive ethnography of a British neoclasical dance company. We selected from the general corpus of data 11 interviews to the company members, which we analized with grounded theory principles. Our findings show how our unit of analysis must be the interaction among dancers in a self-regulated coupling. Thus, we show how musicality is a social hability that can only work in a network of social skills, together with fisicality and listening.  It is, in all, the local product of distributed cognition in the dance studio.

  3. KETERKAITAN ATMOSPHERIC, JOY DAN CUSTOMER LOYALTY PENGUNJUNG TRANS STUDIO BANDUNG

    Directory of Open Access Journals (Sweden)

    Dewi Anggraeni

    2014-01-01

    Full Text Available   Penelitian ini bertujuan untuk mengetahui dan menganalisis pengaruh atmospheric terhadap customer loyalty melalui joy pada pengunjung Trans Studio Bandung. Penelitian ini menggunakan SEM dengan LISREL 8.7. Teknik pengambilan sampel yang digunakan adalah convenience sampling. Penelitian ini menggunakan survei melalui kuesioner. Jumlah sampel sebanyak 120 responden. Hasil dari penelitian ini menunjukkan satu dari tiga variabel atmospheric berpengaruh terhadap variabel joy yaitu design, dua variabel lainnya yaitu ambience dan interaction tidak berpengaruh terhadap joy dan joy berpengaruh terhadap custo-mer loyalty.   Penelitian ini bertujuan untuk mengetahui dan menganalisis pengaruh atmospheric terhadap customer loyalty melalui joy pada pengunjung Trans Studio Bandung. Penelitian ini menggunakan SEM dengan LISREL 8.7. Teknik pengambilan sampel yang digunakan adalah convenience sampling. Penelitian ini menggunakan survei melalui kuesioner. Jumlah sampel sebanyak 120 responden. Hasil dari penelitian ini menunjukkan satu dari tiga variabel atmospheric berpengaruh terhadap variabel joy yaitu design, dua variabel lainnya yaitu ambience dan interaction tidak berpengaruh terhadap joy dan joy berpengaruh terhadap custo-mer loyalty.

  4. The Green Studio Handbook: Environmental Strategies for Schematic Design

    Directory of Open Access Journals (Sweden)

    Alison G. Kwok

    2012-11-01

    Full Text Available In design studio projects we often see schemes with inspired, yet unvalidated, gestural sketches related to wishful green strategies. Yellow and blue magic arrows represent hypotheses about the behavior of daylight and/or air flow in and about buildings. This paper provides an overview of The Green Studio Handbook, recently published as a resource for designers seeking clear guidelines for integrating green design strategies into the conceptual and schematic phases of design. The book contains a discussion of the integration of green strategies and how building form, orientation, and spatial layout are critical to the proper performance of certain green strategies; 40 green design strategies in six broad topic areas, each providing acatalog of information for common strategies that must be implemented at the schematic design phase; and nine case studies that show how various green strategies work together in a finished building. This paper provides excerpts of several design strategies and one case study and suggests a variety of ways that the book may be used.Keywords: green design, case studies, education, schematic design

  5. PROCESS-BASED LEARNING: TOWARDS THEORETICAL AND LECTURE-BASED COURSEWORK IN STUDIO STYLE

    Directory of Open Access Journals (Sweden)

    Hatem Ezzat Nabih

    2010-07-01

    Full Text Available This article presents a process-based learning approach to design education where theoretical coursework is taught in studio-style. Lecture-based coursework is sometimes regarded as lacking in challenge and broadening the gap between theory and practice. Furthermore, lecture-based curricula tend to be detached from the studio and deny students from applying their theoretically gained knowledge. Following the belief that student motivation is increased by establishing a higher level of autonomy in the learning process, I argue for a design education that links theory with applied design work within the studio setting. By synthesizing principles of Constructivist Learning and Problem-Based Learning, PBL students are given greater autonomy by being actively involved in their education. Accordingly, I argue for a studio setting that incorporates learning in studio style by presenting three design applications involving students in investigation and experimentation in order to self-experience the design process.

  6. Thirdspace Explorations in Online Writing Studios: Writing Centers, Writing in the Disiplines and First Year Composition in the Corporate University

    Science.gov (United States)

    Miley, Michelle L.

    2013-01-01

    This study explores the use of online writing studios housed in the University Writing Center and attached to a Writing in the Disciplines course in the College of Technology and a First Year Composition program. The original goal of the online writing studio, modified from Grego and Thompson's (2009) writing studio approach, was to create an…

  7. Microwave heating type evaporator

    International Nuclear Information System (INIS)

    Taura, Masazumi; Nishi, Akio; Morimoto, Takashi; Izumi, Jun; Tamura, Kazuo; Morooka, Akihiko.

    1987-01-01

    Purpose: To prevent evaporization stills against corrosion due to radioactive liquid wastes. Constitution: Microwaves are supplied from a microwave generator by way of a wave guide tube and through a microwave permeation window to the inside of an evaporatization still. A matching device is attached to the wave guide tube for transmitting the microwaves in order to match the impedance. When the microwaves are supplied to the inside of the evaporization still, radioactive liquid wastes supplied from a liquid feed port by way of a spray tower to the inside of the evaporization still is heated and evaporated by the induction heating of the microwaves. (Seki, T.)

  8. Course Design using an Authentic Studio Model / Restructuration de cours au moyen d’un authentique modèle de studio de design

    Directory of Open Access Journals (Sweden)

    Jay R Wilson

    2013-02-01

    Full Text Available Educational Technology and Design 879 is a graduate course that introduces students to the basics of video design and production. In an attempt to improve the learning experience for students a redesign of the course was implemented for the summer of 2011 that incorporated an authentic design studio model. The design studio approach is based on the idea of working and learning in a shared space. Offering a course that employs a studio design model provides the opportunity for exchanging ideas, sharing artifacts, and developing community more deeply and more quickly. What makes this course offering different is the combination of authentic tasks incorporating both online and face-to-face design studio environments. This paper will describe how a studio design approach combined with an authentic learning design was implemented and what was learned. Educational Technology and Design 879 est un cours d'études supérieures initiant les étudiants aux rudiments de la conception et de la production vidéo. Pour améliorer l’expérience d'apprentissage, une refonte du cours a été entreprise à l'été 2011 en intégrant un authentique modèle de studio de design. L'approche « studio de design » repose sur l'idée d’un travail et d'un apprentissage réalisés dans un espace partagé. Un cours utilisant un modèle de studio de design offre la possibilité d'échanger des idées, de partager des artefacts et de développer une communauté plus en profondeur et plus rapidement. Ce qui rend ce cours unique est la combinaison de tâches authentiques qui incorporent des environnements de studio de design à la fois en ligne et en face à face. Cet article décrit comment une approche « studio de design » combinée à une conception d'apprentissage authentique a été mise en œuvre et ce qu’on en a appris.

  9. The FM01-LC reactor modeling using axial dispersion model with a reaction term coupled with a continuous stirred tank (CST)

    International Nuclear Information System (INIS)

    Cruz-Díaz, Martín; Rivera, Fernando F.; Rivero, Eligio P.; González, Ignacio

    2012-01-01

    This work is aimed at modeling the operation of the FM01-LC reactor coupled with a continuous stirred tank (CST) in recirculation mode. The parametric flow dispersion model with an electrochemical reaction limited by mass transfer coupled with Poisson (tertiary potential distribution) and CST equations are used to describe the performance of a FM01-LC reactor with 3D electrodes. Theoretical predictions for dispersion reaction coupled with CST showed a good agreement with the experimental data on depletion of electroactive species as a function of time and potential distribution, whereas these data have not been adequately described by the plug-flow model. Fluid dispersion obtained in the reaction zone (depending on the fluid flow velocities and geometric configuration), plays an important role in tertiary potential distribution.

  10. Design studies of a high-current radiofrequency quadrupole for ...

    Indian Academy of Sciences (India)

    A 3 MeV, 30 mA radiofrequency quadrupole (RFQ) accelerator has been designed for the low-energy high-intensity proton accelerator (LEHIPA) project at BARC, India. The beam and cavity dynamics studies were performed using the computer codes LIDOS, TOUTATIS, SUPERFISH and CST microwave studio. We have ...

  11. Design studies of a high-current radiofrequency quadrupole for ...

    Indian Academy of Sciences (India)

    Abstract. A 3 MeV, 30 mA radiofrequency quadrupole (RFQ) accelerator has been de- signed for the low-energy high-intensity proton accelerator (LEHIPA) project at BARC,. India. The beam and cavity dynamics studies were performed using the computer codes. LIDOS, TOUTATIS, SUPERFISH and CST microwave studio.

  12. Pramana – Journal of Physics | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    A 3 MeV, 30 mA radiofrequency quadrupole (RFQ) accelerator has been designed for the low-energy high-intensity proton accelerator (LEHIPA) project at BARC, India. The beam and cavity dynamics studies were performed using the computer codes LIDOS, TOUTATIS, SUPERFISH and CST microwave studio. We have ...

  13. Modeling and Optimizing Antennas for Rotational Spectroscopy Applications

    Directory of Open Access Journals (Sweden)

    Z. Raida

    2006-12-01

    Full Text Available In the paper, dielectric and metallic lenses are modeled and optimized in order to enhance the gain of a horn antenna in the frequency range from 60 GHz to 100 GHz. Properties of designed lenses are compared and discussed. The structures are modeled in CST Microwave Studio and optimized by Particle Swarm Optimization (PSO in order to get required antenna parameters.

  14. Community Engagement Studios: A Structured Approach to Obtaining Meaningful Input From Stakeholders to Inform Research.

    Science.gov (United States)

    Joosten, Yvonne A; Israel, Tiffany L; Williams, Neely A; Boone, Leslie R; Schlundt, David G; Mouton, Charles P; Dittus, Robert S; Bernard, Gordon R; Wilkins, Consuelo H

    2015-12-01

    Engaging communities in research increases its relevance and may speed the translation of discoveries into improved health outcomes. Many researchers lack training to effectively engage stakeholders, whereas academic institutions lack infrastructure to support community engagement. In 2009, the Meharry-Vanderbilt Community-Engaged Research Core began testing new approaches for community engagement, which led to the development of the Community Engagement Studio (CE Studio). This structured program facilitates project-specific input from community and patient stakeholders to enhance research design, implementation, and dissemination. Developers used a team approach to recruit and train stakeholders, prepare researchers to engage with stakeholders, and facilitate an in-person meeting with both. The research core has implemented 28 CE Studios that engaged 152 community stakeholders. Participating researchers, representing a broad range of faculty ranks and disciplines, reported that input from stakeholders was valuable and that the CE Studio helped determine project feasibility and enhanced research design and implementation. Stakeholders found the CE Studio to be an acceptable method of engagement and reported a better understanding of research in general. A tool kit was developed to replicate this model and to disseminate this approach. The research core will collect data to better understand the impact of CE Studios on research proposal submissions, funding, research outcomes, patient and stakeholder engagement in projects, and dissemination of results. They will also collect data to determine whether CE Studios increase patient-centered approaches in research and whether stakeholders who participate have more trust and willingness to participate in research.

  15. COMPREHENSIVE ENVIRONMENTAL DESIGN (CED STUDIO IN TWO ARCHITECTURE SCHOOLS IN KARACHI: EVOLUTION, PROCESS AND IMPACTS

    Directory of Open Access Journals (Sweden)

    Noman Ahmed

    2010-03-01

    Full Text Available Since 1979, a studio module was introduced in the final year studies of Bachelor of Architecture programme at the Dawood College of Engineering and Technology, Karachi which was the only architecture school in the city at that time. A key objective of this studio module was to sensitize the ‘architects in making’ about context of the built environment, the process through which it was shaped and the forces that contributed in its shaping. The students were assigned to study a micro urban area for indepth investigation and analysis. At the conclusion, analytical presentations followed that also included basic proposals for addressing problems that were identified in the studio exercise. Begun in Dawood College, the studio was adopted by many schools of architecture in the country including the NED University, Karachi. This studio had multiple impacts. Understanding the realities behind creation of urban built environment, realization of multiple roles for professional contribution to ongoing metamorphosis and appreciation of diverse fields of studies within the domain of architectural education and practice were some of the vital aspects. The objectives of this paper are to document the evolution and process of CED studio work. The paper also aims to study the affects of CED work on the perception, understandings and professional orientation of architects who graduated from the schools where CED studio was conducted.

  16. In the Artist's Studio with L'Illustration

    Directory of Open Access Journals (Sweden)

    Esner, Rachel

    2013-03-01

    Full Text Available This article explores the two series of visits to the artist's studio that appeared in the famed French illustrated magazine L'Illustration in the 1850s and in 1886. An in-depth examination of both the texts and images reveals the verbal and visual tropes used to characterize the artists and their spaces, linking these to broader notions of "the artist" – his moral characteristics, behaviors, and artistic practice – as well as to the politics of the art world and the (bourgeois ideology of L'Illustration. The aim is to uncover not only the language but also the mechanics of the "mediatization" of the image of the artist in this crucial period.

  17. Increasing the critical mass: emphasising critique in studio teaching

    Directory of Open Access Journals (Sweden)

    Jacky Bowring

    2000-10-01

    Full Text Available Critique is an indispensable part of the design process, providing a crucial feedback loop to reflect and improve on the quality of design. While critique is a well-established practice in some design disciplines, for landscape architecture a critical culture is yet to develop. As a relatively recent profession, which some have argued is more practice than theory-orientated, critique has not been a priority. However, for the advancement of design thinking, and to ensure quality in the built environment, the development of critique is a significant consideration for landscape architecture. The studio environment provides an ideal opportunity to develop critical skills which graduates can take with them into the professional environment. This paper outlines the present climate of critique within the discipline of landscape architecture, and then explores some of the issues and opportunities for enhancing students' critical capacity in relation to self-critique and the critique of built works.

  18. Exploring the Physics of Music with Temperament Studio

    Science.gov (United States)

    Durfee, Dallin; Colton, John

    2016-03-01

    The physics of waves, resonance, harmonics, and beats has determined how musical instruments are tuned, and has even affected the kinds of music written in different time periods. The laws of physics make it impossible for any fixed scale to have perfect consonance for all chords in all keys, and as a result, various musical scales, or temperaments, have been developed and used throughout history. The study of musical temperament is a rich application of wave physics. It ties several principles together in a context which can be very motivating for students. Furthermore, the topic is accessible to students in introductory classes. We have developed an open source application called Temperament Studio which allows students to explore musical temperament and to hear and measure the effects predicted by wave physics.

  19. TaC Studios New Construction Test House

    Energy Technology Data Exchange (ETDEWEB)

    Butler, T.; Curtis, O.; Kim, E.; Roberts, S.; Stephenson, R.

    2013-03-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed humid climate zone. This home will serve as a model home for the builder partner and addresses Building America energy savings targets through the planning and implementation of a design package will serve as a basis of design for the builder partner's future homes. As a BA test house, this home will be evaluated to detail whole house energy use, end use loads, and HVAC and hot water efficiency.

  20. Advances in microwaves 7

    CERN Document Server

    Young, Leo

    2013-01-01

    Advances in Microwaves, Volume 7 covers the developments in the study of microwaves. The book discusses the effect of surface roughness on the propagation of the TEM mode, as well as the voltage breakdown of microwave antennas. The text also describes the theory and design considerations of single slotted-waveguide linear arrays and the techniques and theories that led to the achievement of wide bandwidths and ultralow noise temperatures for communication applications. The book will prove invaluable to microwave engineers.

  1. Microwave dielectrics: solid solution, ordering and microwave ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 6. Microwave dielectrics: solid solution, ordering and microwave dielectric properties of ( 1 − x ) Ba(Mg 1 / 3 Nb 2 / 3 )O 3 − x Ba(Mg 1 / 8 Nb 3 / 4 )O3 ceramics. YOGITA BISHT RICHA TOMAR PULLANCHIYODAN ABHILASH DEEPA RAJENDRAN LEKSHMI M ...

  2. Opening New Doors: Hands-On Participation Brings a New Audience to the Clay Studio. Wallace Studies in Building Arts Audiences

    Science.gov (United States)

    Harlow, Bob; Heywood, Tricia

    2015-01-01

    This case study examines how The Clay Studio, a ceramic-arts studio, gallery and shop in Philadelphia, attracted younger audiences to its workshops and exhibits. In 2007, the studio became concerned that its audience was getting older and few newcomers were signing up for classes or making purchases. The studio had to engage younger professionals…

  3. Primo studio di prevalenza delle infezioni ospedaliere presso il Centro Ospedaliero Universitario (QSUT di Tirana, Albania: training e studio pilota

    Directory of Open Access Journals (Sweden)

    S. Faria

    2003-05-01

    Full Text Available

    Obiettivi: training: fornire strumenti conoscitivi ed operativi per svolgere un’indagine di prevalenza delle infezioni ospedaliere (IO; studio pilota: valutare la qualità dei rilevatori e della scheda di raccolta dati, le problematiche organizzative del QSUT (circa 1.600 posti-letto, l’operatività della microbiologia.

    Metodi: training: destinato a 17 operatori del QSUT, si è svolto in due giorni. Nel primo si sono introdotti i concetti di base della sorveglianza epidemiologica delle IO, nel secondo si è presentato il protocollo dell’indagine di prevalenza, di cui si sono discussi gli aspetti organizzativi. Per valutare l’apprendimento si è somministrato un test in entrata e in uscita, costituito da 10 quiz a risposta multipla. Studio pilota: in un giorno si è sperimentata l’indagine in tre reparti: chirurgia, rianimazione ed ematologia pediatrica.

    Con la scheda predisposta ad hoc e la supervisione dei docenti del corso, i rilevatori hanno raccolto dati dalle cartelle cliniche, visita dei pazienti e chiesto informazioni al personale dei reparti; le IO sospette sono state validate secondo i criteri dei Centers for Disease Control, USA.

    Risultati: training: la proporzione media delle risposte esatte per ogni partecipante è passata dal 54,2% del pre-test al 74,2% del post-test, quella delle risposte esatte per ogni domanda è stata del 57,9% nel pre-test versus l’81,4% del post-test.
    Studio pilota: si sono arruolati 79 pazienti, di cui 49,4% femmine; di età media 36,6 anni; il 58,2% dei pazienti era esposto ad almeno una procedura invasiva, gli operati erano il 65,8% e il 66,7% era in trattamento antibiotico. La prevalenza di pazienti con IO è del 9,3%, quella di IO del 13,9%; nessuna IO ha avuto conferma con esame microbiologico.

    Conclusioni: selezionare meglio i componenti del gruppo di lavoro, apportare modifiche alla scheda di

  4. Microwave processing heats up

    Science.gov (United States)

    Microwaves are a common appliance in many households. In the United States microwave heating is the third most popular domestic heating method food foods. Microwave heating is also a commercial food processing technology that has been applied for cooking, drying, and tempering foods. It's use in ...

  5. Where Is the ‘Problem’ in Design Studio: Purpose and Significance of the Design Task

    Directory of Open Access Journals (Sweden)

    Beatriz C. Maturana

    2014-11-01

    Full Text Available Design studio is characterised by a teaching model that is distinctly suited for problem-solving. Correspondingly, literature, including information produced by Australian faculties of architecture about their courses asserts that design studio is modelled around problem-solving. However, my research into design studio handouts found a common omission in posing a ‘problem’—a problem that would justify a design solution and from which the ´significance´ of the task would derive. I argue that a well-articulated design problem imbues the case with purpose and significance. It also provides a benchmark against which the results can be assessed and verified.

  6. A Survey of Utopia—Creating Filmic Travelogues in Architectural Design Studio Education †

    OpenAIRE

    Johannes Müntinga; Gerlinde Verhaeghe

    2018-01-01

    This paper investigates the potential of the creation of filmic travelogues in architectural design studio education. It looks at student works from a studio conducted at RWTH Aachen University in the summer term of 2017 and explores how the works construct meaning from and reflect on architectural reference in an active creative process. The assignment of the studio was to create a travelogue of a 4-day excursion to Belgium and the South of England in the form of a short film. Inspired by Pa...

  7. College students and youth collaborating in design: research on the design studio

    Directory of Open Access Journals (Sweden)

    Ann Forsyth

    1999-10-01

    Full Text Available Landscape architecture in the United States has traditionally been dominated by white middle-class professionals in service to clients with backgrounds and values similar to their own. This paper looks at a design studio in which landscape architecture students from white middle-class suburban backgrounds work with Latino children and youth in a low-income urban neighbourhood. The community service learning studio is looked at as one method of introducing students to working with populations quite different from their own. It examines the problems and benefits for both the community youth and the college students, and makes recommendations for studios that follow this same model.

  8. Proceedings of microwave processing of materials 3

    International Nuclear Information System (INIS)

    Beatty, R.L.

    1992-01-01

    This book contains proceedings of the third MRS Symposium on Microwave Processing of Materials. Topics covered include: Microwave Processing Overviews, Numerical Modeling Techniques, Microwave Processing System Design, Microwave/Plasma Processing, Microwave/Materials Interactions, Microwave Processing of Ceramics, Microwave Processing of Polymers, Microwave Processing of Hazardous Wastes, Microwave NDE Techniques and Dielectric Properties and Measurements

  9. Hydrogen generation during melter feed preparation of Tank 42 sludge and salt washed loaded CST in the Defense Waste Processing Facility

    International Nuclear Information System (INIS)

    Daniel, W.E.

    1999-01-01

    The main objective of these scoping tests was to measure the rate of hydrogen generation in a series of experiments designed to duplicate the expected SRAT and SME processing conditions in laboratory scale vessels. This document details the testing performed to determine the maximum hydrogen generation expected with a coupled flowsheet of sludge, loaded CST [crystalline silicotitanate], and frit

  10. THERMAL COMFORT STUDY OF AN AIR-CONDITIONED DESIGN STUDIO IN TROPICAL SURABAYA

    Directory of Open Access Journals (Sweden)

    Agus Dwi Hariyanto

    2005-01-01

    Full Text Available This paper evaluates the current thermal comfort condition in an air-conditioned design studio using objective measurement and subjective assessment. Objective measurement is mainly to quantify the air temperature, MRT, relative humidity, and air velocity. Subjective assessment is conducted using a questionnaire to determine the occupants thermal comfort sensations and investigate their perception of the thermal comfort level. A design studio in an academic institution in Surabaya was chosen for the study. Results show that more than 80% of the occupants accepted the indoor thermal conditions even though both the environmental and comfort indices exceeded the limit of the standard (ASHRAE Standard 55 and ISO 7730. In addition, non-uniformity of spatial temperature was present in this studio. Some practical recommendations were made to improve the thermal comfort in the design studio.

  11. Lettori e interpreti del Furioso. Atti della giornata di studio (Milano, 3 ottobre 2012

    Directory of Open Access Journals (Sweden)

    Cristina Zampese

    2013-12-01

    Full Text Available La sezione raccoglie gli interventi presentati in occasione della Giornata di Studio "Lettori e interpreti del Furioso" tenutasi presso l'Università degli Studi di Milano il 3 ottobre 2012.

  12. Evaluating the Physical Environment of Design Studios: A Case study in Malaysian Private Architecture Schools

    OpenAIRE

    Shanthi Muniandy; Tareef Hayat Khan; Abdullah Sani Ahmad

    2015-01-01

    Understanding the notion of learner’s experiences in the design of physical environment of an architecture design studio is a necessity as it contains certain values of influence. It is due to the unique learning experiences which are accrued particularly in design studio that is continued during professional practice as well. Most architectural campuses in Malaysian Private Higher Education Institutions (MPHEI) are devoid of certain important elements and this issue needs to be looked into s...

  13. Male Gender Role Pada Karakter Superhero Dalam Film Produksi Marvel Studios

    OpenAIRE

    Ridwan, Ridwan

    2014-01-01

    Penelitian ini bertujuan untuk mencari apa saja male gender role yang terdapat pada karakter superhero dalam film produksi Marvel Studios. Male gender role sendiri memiliki arti sebagai sebuah script yang digunakan sebagai “pedoman” bagaimana seharusnya, seorang pria berprilaku dalam kehidupan sehari-harinya. Metode penelitian yang digunakan adalah analisis isi dengan menggunakan 28 film layar lebar produksi Marvel Studios mulai tahun 2000 hingga 2013 sebagai recording unit. Peneliti menggun...

  14. Financial Studio: Android Based Application for Computing Tax, Pension,Zakat and Loan

    OpenAIRE

    Asghar, Zubair; batool, ulfat; bibi, farheen

    2016-01-01

    This work deals with the development of android-based financial studio, an integrated application forcalculating tax, pension, zakat, and loan. Financial studio can facilitate employers of any department and otherindividuals. The application is developed using MIT app inventor-based android platform. The financial studiohas four computational modules, namely: (i) tax, (ii) pension, (iii) zakat, and (iv) loan. The system provides anintegrated environment for performing aforementioned distinct ...

  15. SPACES OF WELLBEING : WHAT IS SO SPECIAL ABOUT SPECIAL NEEDS ART STUDIOS?

    OpenAIRE

    Radcliffe, David

    2013-01-01

    ABSTRACT Radcliffe, David. Spaces of Wellbeing, What is so special about special needs art studios? Autumn 2013, 73 p., 2 appendices. Diaconia University of Applied Sciences, Degree Programme in Social Services + option in Diaconal Social Work, Bachelor of Social Services (UAS) + Qualifi-cation for the office of diaconia worker in The Church of Finland. The aim of this thesis is to discover the common experiences of art studio par-ticipants in relation to wellbeing. This has become a...

  16. Design Collaboration on the Web – The History of VDS to u-Studio

    OpenAIRE

    Yamaguchi,Shigeyuki; Naka,Ryusuke; Matsumoto,Yuji; Saji,Masahiro

    2006-01-01

    The aim of this paper is to discuss our current model of studio education and explain the outcome of our research which is based on seventeen design collaboration projects. Our study group has experienced collaborative design education on the web since 1996 with nine different institutions worldwide in order to have students trained for the process of group design. The authors will explain the objectives of educational design studio, the core subject matter and the teaching process based on o...

  17. THERMAL COMFORT STUDY OF AN AIR-CONDITIONED DESIGN STUDIO IN TROPICAL SURABAYA

    OpenAIRE

    Agus Dwi Hariyanto

    2005-01-01

    This paper evaluates the current thermal comfort condition in an air-conditioned design studio using objective measurement and subjective assessment. Objective measurement is mainly to quantify the air temperature, MRT, relative humidity, and air velocity. Subjective assessment is conducted using a questionnaire to determine the occupants thermal comfort sensations and investigate their perception of the thermal comfort level. A design studio in an academic institution in Surabaya was chosen ...

  18. Studio dei processi di resistenza a Fusarium oxisporum f. sp. Radicis-Lycopersici in pomodoro

    OpenAIRE

    Ferriello, Francesca

    2010-01-01

    Il F. oxysporum fs radicis-lycopersici (Forl) è l’agente del marciume del coletto e delle radici in pomodoro. Negli ultimi anni questo patogeno è stato un fattore limitante nella produzione del pomodoro. Lo studio dei geni implicati nella risposta di resistenza a questa malattia potrebbe facilitare la selezione di piante resistenti al patogeno. Le analisi trascrittomiche hanno facilitato lo studio di molti patosistemi. In questo lavoro è stata studiata l’interazione patogeno-pomodoro attr...

  19. Macro Micro Studio: A Prototype Energy Autonomous Laboratory

    Directory of Open Access Journals (Sweden)

    Neil Burford

    2016-05-01

    Full Text Available In 2011, the Departments of Architecture, Physics and Engineering began the development of a small Passivhaus standard, renewable energy self-sufficient studio at the University Botanical Gardens in Dundee. The prototype was conceived as an experimental, integrated technical platform to monitor the performance of an ultra-low-energy consumption, energy positive building in the Scottish climate, and understand user behaviour in relation to managing energy in-use and reducing occupant’s energy consumption. The building fabric has been constructed using regional sustainable materials, including a low-thermal bridging timber kit relying on Scottish small cross-section timber and a novel foam concrete (air entrained slab foundation. While further work is required to complete the installation of the renewable energy system, predictive modelling indicates that energy autonomy can be largely achieved. With the recent introduction of the new Passivhaus 2009 criteria in October 2015, this project provides an insight into the practical application of an autarkic energy system in a northern European climate. The following paper describes the research rationale, the processes and decision making in the development of the formal and technical design of the building and discusses our current thinking in the design and quantification of the energy system.

  20. FRAMEWORK FOR A CROSS-BORDER TRANSDISCIPLINARY DESIGN STUDIO EDUCATION

    Directory of Open Access Journals (Sweden)

    Rahinah Ibrahim

    2007-11-01

    Full Text Available This paper presents a conceptual framework for an architectural construction integration (A-CI design studio curriculum in the context of an architectural graduate program. It aims to apply trans-disciplinary principles to educate competent graduates in sustainable global design-build practice. The A-CI curriculum emulates the computer-integrated Project Based Learning Laboratory (PBL model developed at Stanford University by building on the PBL’s framework, and principles of learning and teaching professional, cultural, technological, and spatial differences amongst the building stakeholders. We extend it to include a project’s financial and regulatory decision-making process along the planning and architectural design processes at the earlier project development life-cycle phases. The paper will first present the literature review on transdisciplinary learning, followed by a description on the framework and principles of the PBL model before proposing how we extend the PBL model to integrate the early architectural design phase. The proposed program’s framework covers a four-semester curriculum at graduate level during which, students from participating universities in developing countries have the opportunity to participate in a global building project with students from participating universities in developed countries. An additional benefit of this curriculum is that it would allow students from both developing and developed countries to experience cross-border trans-disciplinary learning and teaching.

  1. Advances in microwaves 3

    CERN Document Server

    Young, Leo

    2013-01-01

    Advances in Microwaves, Volume 3 covers the advances and applications of microwave signal transmission and Gunn devices. This volume contains six chapters and begins with descriptions of ground-station antennas for space communications. The succeeding chapters deal with beam waveguides, which offer interesting possibilities for transmitting microwave energy, as well as with parallel or tubular beams from antenna apertures. A chapter discusses the electron transfer mechanism and the velocity-field characteristics, with a particular emphasis on the microwave properties of Gunn oscillators. The l

  2. The microwave market

    International Nuclear Information System (INIS)

    Bybokas, J.

    1989-01-01

    As superconductors move from the laboratory to the marketplace, it becomes more important for researchers and manufacturers to understand the markets for this technology. The large market for microwave systems represents a major opportunity for high-T c superconductors. Conductor losses are a primary design limitation in conventional microwave systems. The low losses of superconductors at microwave frequencies will allow component designers and system designers to improve their products in many ways. The most important market segments for microwave systems are outlined in this discussion

  3. Integrated microwave photonics

    NARCIS (Netherlands)

    Marpaung, D.A.I.; Roeloffzen, C.G.H.; Heideman, Rene; Leinse, Arne; Sales, S.; Capmany, J.

    2013-01-01

    Microwave photonics (MWP) is an emerging field in which radio frequency (RF) signals are generated, distributed, processed and analyzed using the strength of photonic techniques. It is a technology that enables various functionalities which are not feasible to achieve only in the microwave domain. A

  4. Microwave Enhanced Reactive Distillation

    NARCIS (Netherlands)

    Altman, E.

    2011-01-01

    The application of electromagnetic irradiation in form of microwaves (MW) has gathered the attention of the scientific community in recent years. MW used as an alternative energy source for chemical syntheses (microwave chemistry) can provide clear advantages over conventional heating methods in

  5. Microwave Breast Imaging Techniques

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Rubæk, Tonny

    2010-01-01

    This paper outlines the applicability of microwave radiation for breast cancer detection. Microwave imaging systems are categorized based on their hardware architecture. The advantages and disadvantages of various imaging techniques are discussed. The fundamental tradeoffs are indicated between...... various requirements to be fulfilled in the design of an imaging system for breast cancer detection and some strategies to overcome these limitations....

  6. MEDIA REKAM JEJAK TAHAPAN PRA DESAIN DENGAN POSTER : MENINGKATKAN KINERJA DAN LUARAN PADA STUDIO PERANCANGAN ARSITEKTUR

    Directory of Open Access Journals (Sweden)

    Fibria Conytin Nugrahini

    2015-12-01

    Full Text Available A Pre-design process in studio design class includes observation phase, analysis and programming, a directed process of searching and recording information. Based on an early observation, currently pre-design activities in class or studio often has been less optimal due to the low of students performance and the creativities. This causes the output generated from pre-design process was not maximized while undocumented or do not have a good track records. This paper aims to explore the use of posters as a creative ideas in the documentation of of pre-design stage. This is a class-action research as the result of the development of pre-design activities with inquiry methods using the poster as a medium track record in architectural design studio. Research methods include observation and assessment pre-design student outcomes, and questionnaire. Poster outcomes observation were ratings based on several criterias. The questionnnaires tested the posters feasibility in improving the performance and outcomes based on the process and student experiences. Because it is class-action reasearch, this study is limited to the studio class where the author conducted lectures and studio guidance. The results showed an increase in the performance of students in search of matter, observations, material analysis, as well as programming in the use of posters as track record media. In addition, students were satisfied and more creatively visualize their ideas in the pr e-design phase by using the poster media

  7. Exploring student learning profiles in algebra-based studio physics: A person-centered approach

    Science.gov (United States)

    Pond, Jarrad W. T.; Chini, Jacquelyn J.

    2017-06-01

    In this study, we explore the strategic self-regulatory and motivational characteristics of students in studio-mode physics courses at three universities with varying student populations and varying levels of success in their studio-mode courses. We survey students using questions compiled from several existing questionnaires designed to measure students' study strategies, attitudes toward and motivations for learning physics, organization of scientific knowledge, experiences outside the classroom, and demographics. Using a person-centered approach, we utilize cluster analysis methods to group students into learning profiles based on their individual responses to better understand the strategies and motives of algebra-based studio physics students. Previous studies have identified five distinct learning profiles across several student populations using similar methods. We present results from first-semester and second-semester studio-mode introductory physics courses across three universities. We identify these five distinct learning profiles found in previous studies to be present within our population of introductory physics students. In addition, we investigate interactions between these learning profiles and student demographics. We find significant interactions between a student's learning profile and their experience with high school physics, major, gender, grade expectation, and institution. Ultimately, we aim to use this method of analysis to take the characteristics of students into account in the investigation of successful strategies for using studio methods of physics instruction within and across institutions.

  8. Segmentation, Targeting, dan Positioning Studio Tato di Surabaya dalam Perkembangan Gaya Hidup

    Directory of Open Access Journals (Sweden)

    Anang Tri Wahyudi

    2013-01-01

    Full Text Available This study attempts to examine in depth the influence of lifestyle on the orientation of recipients (tattoo users to the art of tattooing, which is independent of the value of a valuable commodity, and explore the extent to which the process of tattoo studios’ segmentation, targeting, and positioning in managing a tattoo studio. This study uses qualitative research methods with interpretive phenomenological foundation of thinking, which is oriented to truth that is subjective to informants, which consists of a tattoo studio tattooist and managers who have more than five years of experience, and the recipient women and men under the age of 30. The development of post-modern lifestyle is synonymous with consumer culture, which affects the orientation of recipients towards tattoos as works of art, a medium of expression, search for identity, and part of fashion accessories, therefore tattoos become works of art that have commodity value. The existing tattoo studios already have market segments, target markets, positioning, and clear marketing strategy, however there are some tattoo studios that do not determine their market segments and target goals. They tend to flow and follow the situation and market conditions. Several factors that affect the condition and management of tattoo studios today are environmental factors, resource constraints, and tattoos as art products that are homogeneous.

  9. Formal Learning Sequences and Progression in the Studio: A Framework for Digital Design Education

    Directory of Open Access Journals (Sweden)

    Pontus Wärnestål

    2016-02-01

    Full Text Available This paper examines how to leverage the design studio learning environment throughout long-term Digital Design education in order to support students to progress from tactical, well-defined, device-centric routine design, to confidently design sustainable solutions for strategic, complex, problems for a wide range of devices and platforms in the digital space. We present a framework derived from literature on design, creativity, and theories on learning that: (a implements a theory of formal learning sequences as a user-centered design process in the studio; and (b describes design challenge progressions in the design studio environment modeled in seven dimensions. The framework can be used as a tool for designing, evaluating, and communicating course progressions within – and between series of – design studio courses. This approach is evaluated by implementing a formal learning sequence framework in a series of design studio courses that progress in an undergraduate design-oriented Informatics program. Reflections from students, teachers, and external clients indicate high student motivation and learning goal achievement, high teacher satisfaction and skill development, and high satisfaction among external clients.

  10. Microwave hydrology: A trilogy

    Science.gov (United States)

    Stacey, J. M.; Johnston, E. J.; Girard, M. A.; Regusters, H. A.

    1985-01-01

    Microwave hydrology, as the term in construed in this trilogy, deals with the investigation of important hydrological features on the Earth's surface as they are remotely, and passively, sensed by orbiting microwave receivers. Microwave wavelengths penetrate clouds, foliage, ground cover, and soil, in varying degrees, and reveal the occurrence of standing liquid water on and beneath the surface. The manifestation of liquid water appearing on or near the surface is reported by a microwave receiver as a signal with a low flux level, or, equivalently, a cold temperature. Actually, the surface of the liquid water reflects the low flux level from the cosmic background into the input terminals of the receiver. This trilogy describes and shows by microwave flux images: the hydrological features that sustain Lake Baykal as an extraordinary freshwater resource; manifestations of subsurface water in Iran; and the major water features of the Congo Basin, a rain forest.

  11. Microwave ion source

    Science.gov (United States)

    Leung, Ka-Ngo; Reijonen, Jani; Thomae, Rainer W.

    2005-07-26

    A compact microwave ion source has a permanent magnet dipole field, a microwave launcher, and an extractor parallel to the source axis. The dipole field is in the form of a ring. The microwaves are launched from the middle of the dipole ring using a coaxial waveguide. Electrons are heated using ECR in the magnetic field. The ions are extracted from the side of the source from the middle of the dipole perpendicular to the source axis. The plasma density can be increased by boosting the microwave ion source by the addition of an RF antenna. Higher charge states can be achieved by increasing the microwave frequency. A xenon source with a magnetic pinch can be used to produce intense EUV radiation.

  12. RECONCEPTUALIZING THE DESIGN STUDIO IN ARCHITECTURAL EDUCATION: DISTANCE LEARNING AND BLENDED LEARNING AS TRANSFORMATION FACTORS

    Directory of Open Access Journals (Sweden)

    Marta Masdéu

    2017-07-01

    Full Text Available Nowadays, the professional practice is undergoing changes that are affecting the work of architects. Architectural studios and engineering consultancies are reinventing themselves to adapt to social, technological and productive needs. However, despite the professional changes, the training of architects in schools continues to focus on educational models that have grown more and more distant from the professional demands. In view of this, schools of architecture have been forced to revise their programmes to develop teaching methods that enable them to adapt to the current situation. Thus, the Design Studio -considered as the core of education in architecture- needs a reconceptualization in order to change the way architects should learn. Pedagogical approaches such as distance learning and blended learning can help update the concept of the Design Studio and transform it into a new participatory and delocalized learning space.

  13. Teaching For Art Criticism: Incorporating Feldman’s Critical Analysis Learning Model In Students’ Studio Practice

    Directory of Open Access Journals (Sweden)

    Maithreyi Subramaniam

    2016-01-01

    Full Text Available This study adopted 30 first year graphic design students’ artwork, with critical analysis using Feldman’s model of art criticism. Data were analyzed quantitatively; descriptive statistical techniques were employed. The scores were viewed in the form of mean score and frequencies to determine students’ performances in their critical ability. Pearson Correlation Coefficient was used to find out the correlation between students’ studio practice and art critical ability scores. The findings showed most students performed slightly better than average in the critical analyses and performed best in selecting analysis among the four dimensions assessed. In the context of the students’ studio practice and critical ability, findings showed there are some connections between the students’ art critical ability and studio practice.

  14. Minimum game plans: Eco-design and low-tech fabrication in studios

    Directory of Open Access Journals (Sweden)

    Cristian Suau

    2013-07-01

    Full Text Available Through comparative teaching and design methods, this study critically explores the principles of low-tech and high-design carried out in several international workshops led by the author in Spain, Slovenia, Chile and the UK, since 2004. This study focuses in the teaching and learning systems of Eco-design implemented in several design studios and compact workshops. Since 2008 I have offered intense 3-week design workshops as part of the BSc activity called 'Vertical Studio' that is carried out at the Welsh School of Architecture (WSA in Cardiff. The selected cases show how engaged students and tutors can rapidly develop key environmental and constructional skills such as spatial versatility, environmental awareness, lifecycle thinking and collaborative research by doing applied in innovative mock-ups and prototypes. Each studio brief consisted of intensive workshops focusing on conceptualisation and fabrication of elementary frameworks by using disused cost-free materials.

  15. Sempre connessi: il media multitasking a lezione e durante lo studio

    Directory of Open Access Journals (Sweden)

    Gisella Paoletti

    2015-07-01

    Full Text Available In questa ricerca abbiamo chiesto a 100 studenti universitari di descrivere le modalità d’uso dei propri strumenti tecnologici nei diversi contesti di studio e durante le lezioni in aula. Le risposte ottenute hanno evidenziato un uso esteso e continuo del cellulare per scrivere e rispondere a messaggi, sia a lezione sia durante le attività di studio. Nel gruppo di studenti da noi incontrati risulta essere diffusa l’opinione che fare multitasking, in particolare tramite la ricezione/produzione di messaggi, non abbia effetti sulla qualità dell’apprendimento, ma solo sul tempo dello studio. I partecipanti dichiarano di preferire ambienti privi di distrazioni, ma attribuiscono una valenza positiva alla possibilità di rimanere in relazione continua con la propria rete di contatti.

  16. Gold Nanoparticle Microwave Synthesis

    International Nuclear Information System (INIS)

    Krantz, Kelsie E.; Christian, Jonathan H.; Coopersmith, Kaitlin; Washington II, Aaron L.; Murph, Simona H.

    2016-01-01

    At the nanometer scale, numerous compounds display different properties than those found in bulk material that can prove useful in areas such as medicinal chemistry. Gold nanoparticles, for example, display promise in newly developed hyperthermia therapies for cancer treatment. Currently, gold nanoparticle synthesis is performed via the hot injection technique which has large variability in final particle size and a longer reaction time. One underdeveloped area by which these particles could be produced is through microwave synthesis. To initiate heating, microwaves agitate polar molecules creating a vibration that gives off the heat energy needed. Previous studies have used microwaves for gold nanoparticle synthesis; however, polar solvents were used that partially absorbed incident microwaves, leading to partial thermal heating of the sample rather than taking full advantage of the microwave to solely heat the gold nanoparticle precursors in a non-polar solution. Through this project, microwaves were utilized as the sole heat source, and non-polar solvents were used to explore the effects of microwave heating only as pertains to the precursor material. Our findings show that the use of non-polar solvents allows for more rapid heating as compared to polar solvents, and a reduction in reaction time from 10 minutes to 1 minute; this maximizes the efficiency of the reaction, and allows for reproducibility in the size/shape of the fabricated nanoparticles.

  17. Gold Nanoparticle Microwave Synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Krantz, Kelsie E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Christian, Jonathan H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Coopersmith, Kaitlin [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Washington, II, Aaron L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Murph, Simona H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-07-27

    At the nanometer scale, numerous compounds display different properties than those found in bulk material that can prove useful in areas such as medicinal chemistry. Gold nanoparticles, for example, display promise in newly developed hyperthermia therapies for cancer treatment. Currently, gold nanoparticle synthesis is performed via the hot injection technique which has large variability in final particle size and a longer reaction time. One underdeveloped area by which these particles could be produced is through microwave synthesis. To initiate heating, microwaves agitate polar molecules creating a vibration that gives off the heat energy needed. Previous studies have used microwaves for gold nanoparticle synthesis; however, polar solvents were used that partially absorbed incident microwaves, leading to partial thermal heating of the sample rather than taking full advantage of the microwave to solely heat the gold nanoparticle precursors in a non-polar solution. Through this project, microwaves were utilized as the sole heat source, and non-polar solvents were used to explore the effects of microwave heating only as pertains to the precursor material. Our findings show that the use of non-polar solvents allows for more rapid heating as compared to polar solvents, and a reduction in reaction time from 10 minutes to 1 minute; this maximizes the efficiency of the reaction, and allows for reproducibility in the size/shape of the fabricated nanoparticles.

  18. Washington Alexandria Architecture Center students merge creative concepts of dance and space to design dance studio in Arlington

    OpenAIRE

    Micale, Barbara L.

    2009-01-01

    Elements of dance and dance-theatre -- including movement and exercise, flowing costumes, and expressive lighting --inspired students in the Architecture Master's design studio at the Washington Alexandria Architecture Center to imagine innovative ways of merging public and private space for a dance studio in nearby Arlington.

  19. RMK büroohoone = State Forest Management Centre office building / Arhitektuuribüroo Studio-3

    Index Scriptorium Estoniae

    2013-01-01

    Riigimetsa Majandamise Keskuse bürooruumide (Toompuiestee 24, Tallinn) sisekujundusest. Autorid: Reet Põime, Liisa Põime, Anu Põime, Andres Põime, Kristi Prinzmann, Lauri Kalm, Lauri Vaimel (Studio-3). Arhitekt Ott Kadariku arvamus. Arhitektuuribüroo Studio-3 lühitutvustus

  20. Music Instrument Teachers in Higher Education: An Investigation of the Key Influences on How They Teach in the Studio

    Science.gov (United States)

    Daniel, Ryan; Parkes, Kelly A.

    2017-01-01

    In higher education music instrument teaching, there is a strong tradition of high-level performers being recruited to teach advanced students within the private studio despite the fact these educators often have no training in pedagogy. The studio environment also continues to be dominated by the one-to-one lesson format and the master-apprentice…

  1. Revealing the Experience of Children and Teachers Even in Their Absence: Documenting in the Early Childhood Studio

    Science.gov (United States)

    Parnell, Will

    2011-01-01

    Inspired by the educational approach in the municipal pre-primary schools and infant-toddler centers of Reggio Emilia, Italy, two studio teachers and a researcher participant in Portland, Oregon capture classroom work, make investigations and interpretations in the studio as a laboratory space of learning, help children represent thinking, and…

  2. Stress indotto dalla guida di autoveicoli: studio di parametri psicofisiologici

    Directory of Open Access Journals (Sweden)

    R. Vivoli

    2003-05-01

    studenti universitari esposti per 5 ore al complesso dei fattori stressanti propri dell’ambiente della discoteca. In un recente studio condotto su autisti di autocarri abbiamo altresì osservato, al termine del turno di guida, un rilevante incremento del trombossano urinario che potrebbe rappresentare un marcatore di rischio cardiovascolare.

  3. MICROWAVE STABILIZATION AND MICROWAVE-STIMULATED FIXATION

    NARCIS (Netherlands)

    BOON, ME; KOK, LP

    1990-01-01

    In microwave stabilization the tissue is prepared for histoprocessing through the uniformly distributed increased temperature. This procedure can be called unique: Exclusively by the uniform well-controlled temperature rise to 55-degrees-C it is possible to stabilize the tissue to the needed

  4. Gestió de factures electròniques amb .NET (Visual Studio Tools for Office)

    OpenAIRE

    Gimeno Capín, Pablo

    2008-01-01

    Creació d¿un software de gestió de factures electròniques desenvolupat en aquesta plataforma tecnològica, amb indicació expressa d¿utilització de les eines VSTO (Visual Studio Tools for Office) en la seva última versió. Creación de un software de gestión de facturas electrónicas desarrollado en esta plataforma tecnológica, con indicación expresa de utilización de las herramientas VSTO (Visual Studio Tools for Office) en su última versión. Creation of electronic invoice management softwa...

  5. O home studio como ferramenta para o ensino da performance musical

    OpenAIRE

    VIEIRA, Gabriel da Silva

    2010-01-01

    A utilização de estúdios de gravação de composição simples (ou caseira), os chamados home studios, tem crescido significativamente no Brasil devido ao barateamento de certos aparatos tecnológicos empregados em seu contexto. A exemplo, placas de som, microfones, monitores, mesas e componentes de hardware. O home studio, ou estúdio caseiro, é um ambiente de produção musical que utiliza de diferentes tecnologias para conceber um determinado produto musical, pedagógico ou sonoro...

  6. Microwaves - the hidden danger

    International Nuclear Information System (INIS)

    Brodeur, P.

    1987-01-01

    Today, highly frequent radio waves are regarded as undangerous to man. Diseases seen at radar-technicians during the 2nd World War, however, indicated that microwaves applied in radar systems were hazardous to health. The Russian work medicine has been knowing microwave-caused hazards in industry since the beginning of the thirties. Therefore in some East-European countries there are terms of protection and severe norms of safety for the staying of persons in the radiation sphere of microwaves. (orig.) [de

  7. Advances in microwaves

    CERN Document Server

    Young, Leo

    1967-01-01

    Advances in Microwaves, Volume 2 focuses on the developments in microwave solid-state devices and circuits. This volume contains six chapters that also describe the design and applications of diplexers and multiplexers. The first chapter deals with the parameters of the tunnel diode, oscillators, amplifiers and frequency converter, followed by a simple physical description and the basic operating principles of the solid state devices currently capable of generating coherent microwave power, including transistors, harmonic generators, and tunnel, avalanche transit time, and diodes. The next ch

  8. Advances in microwaves 4

    CERN Document Server

    Young, Leo

    2013-01-01

    Advances in Microwaves, Volume 4 covers some innovations in the devices and applications of microwaves. This volume contains three chapters and begins with a discussion of the application of microwave phasers and time delay elements as beam steering elements in array radars. The next chapter provides first an overview of the technical aspects and different types of millimeter waveguides, followed by a survey of their application to railroads. The last chapter examines the general mode of conversion properties of nonuniform waveguides, such as waveguide tapers, using converted Maxwell's equatio

  9. Benchmark simulations of ICRF antenna coupling

    International Nuclear Information System (INIS)

    Louche, F.; Lamalle, P. U.; Messiaen, A. M.; Compernolle, B. van; Milanesio, D.; Maggiora, R.

    2007-01-01

    The paper reports on ongoing benchmark numerical simulations of antenna input impedance parameters in the ion cyclotron range of frequencies with different coupling codes: CST Microwave Studio, TOPICA and ANTITER 2. In particular we study the validity of the approximation of a magnetized plasma slab by a dielectric medium of suitably chosen permittivity. Different antenna models are considered: a single-strap antenna, a 4-strap antenna and the 24-strap ITER antenna array. Whilst the diagonal impedances are mostly in good agreement, some differences between the mutual terms predicted by Microwave Studio and TOPICA have yet to be resolved

  10. Studio in Advertising Design, Fashion Design and Illustration, Product Design, Stage Design. Volume 3: Advanced Elective Courses in Art for Grades 10, 11, or 12.

    Science.gov (United States)

    New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

    The document provides teaching guidelines and information on advance elective courses in a studio art program for grades 10, 11, and 12. The courses are presented in four sections: (1) studio in advertising design--advertising and production, lettering, illustrating, and color reproduction; (2) studio in fashion design and illustration--elements…

  11. Microwave photonics shines

    Science.gov (United States)

    Won, Rachel

    2011-12-01

    The combination of microwave photonics and optics has advanced many applications in defence, wireless communications, imaging and network infrastructure. Rachel Won talks to Jianping Yao from the University of Ottawa in Canada about the importance of this growing field.

  12. Emitron: microwave diode

    Science.gov (United States)

    Craig, G.D.; Pettibone, J.S.; Drobot, A.T.

    1982-05-06

    The invention comprises a new class of device, driven by electron or other charged particle flow, for producing coherent microwaves by utilizing the interaction of electromagnetic waves with electron flow in diodes not requiring an external magnetic field. Anode and cathode surfaces are electrically charged with respect to one another by electron flow, for example caused by a Marx bank voltage source or by other charged particle flow, for example by a high energy charged particle beam. This produces an electric field which stimulates an emitted electron beam to flow in the anode-cathode region. The emitted electrons are accelerated by the electric field and coherent microwaves are produced by the three dimensional spatial and temporal interaction of the accelerated electrons with geometrically allowed microwave modes which results in the bunching of the electrons and the pumping of at least one dominant microwave mode.

  13. Microwave system engineering principles

    CERN Document Server

    Raff, Samuel J

    1977-01-01

    Microwave System Engineering Principles focuses on the calculus, differential equations, and transforms of microwave systems. This book discusses the basic nature and principles that can be derived from thermal noise; statistical concepts and binomial distribution; incoherent signal processing; basic properties of antennas; and beam widths and useful approximations. The fundamentals of propagation; LaPlace's Equation and Transmission Line (TEM) waves; interfaces between homogeneous media; modulation, bandwidth, and noise; and communications satellites are also deliberated in this text. This bo

  14. A microwave powered sensor assembly for microwave ovens

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention relates to a microwave powered sensor assembly for micro- wave ovens. The microwave powered sensor assembly comprises a microwave antenna for generating an RF antenna signal in response to microwave radiation at a predetermined excitation frequency. A dc power supply circuit...... of the microwave powered sensor assembly is operatively coupled to the RF antenna signal for extracting energy from the RF antenna signal and produce a power supply voltage. A sensor is connected to the power supply voltage and configured to measure a physical or chemical property of a food item under heating...... in a microwave oven chamber....

  15. The National Film Board's Studio D: Feminists Making Films for Peace.

    Science.gov (United States)

    Taylor, Anita

    Studio D of the National Film Board of Canada, a women's film making unit established to make films by, for, and about women, has created a group of five films that effectively develop the argument that women can and must join the effort to bring peace to a nuclear world. The first of these peace films, "If You Love This Planet,"…

  16. Robotic Design Studio: Exploring the Big Ideas of Engineering in a Liberal Arts Environment.

    Science.gov (United States)

    Turbak, Franklyn; Berg, Robbie

    2002-01-01

    Suggests that it is important to introduce liberal arts students to the essence of engineering. Describes Robotic Design Studio, a course in which students learn how to design, assemble, and program robots made out of LEGO parts, sensors, motors, and small embedded computers. Represents an alternative vision of how robot design can be used to…

  17. Designing Teaching--Teaching Designing: Teacher's Guidance in a Virtual Design Studio

    Science.gov (United States)

    Lahti, Henna; Seitamaa-Hakkarainen, Pirita

    2014-01-01

    This study examined pedagogical aspects of virtual designing. It focused on how an industrial design teacher organised a university course in plastic product design and how the teacher guided student teams' design processes in a virtual design studio. The model of Learning by Collaborative Design was used as a pedagogical and analytical framework.…

  18. Evaluating the Physical Environment of Design Studios: A Case study in Malaysian Private Architecture Schools

    Directory of Open Access Journals (Sweden)

    Shanthi Muniandy

    2015-09-01

    Full Text Available Understanding the notion of learner’s experiences in the design of physical environment of an architecture design studio is a necessity as it contains certain values of influence. It is due to the unique learning experiences which are accrued particularly in design studio that is continued during professional practice as well. Most architectural campuses in Malaysian Private Higher Education Institutions (MPHEI are devoid of certain important elements and this issue needs to be looked into seriously. Apparently, most architectural design studios today have different physical settings, and have developed their own learning culture based on the typical space that they have. Reviewing the physical environment and how it contributes to the social environ-ment in MPHEI’s architectural context requires certain understanding on the learner’s psycho-logical needs, expectations and in the same time to meet the educational objective which is never an easy task. Hence, this paper reviewed the studies of the possible physical environment approaches in connecting the learner’s connections in architecture studio learning environ-ment. A questionnaire survey with Likert-scale components, and semi-structured interview on learners of five distinguished Private Architectural schools in Malaysia unveiled several signifi-cant findings that can lead entrepreneurs to upgrade the physical environment of these MPHEIs in order to cope with the demands of the stakeholders.

  19. Scrutinizing Studio Art and Its Study: Historical Relations and Contemporary Conditions

    Science.gov (United States)

    Grierson, Elizabeth M.

    2010-01-01

    This article addresses shifts in the pedagogical positioning of art theory and art practice through the decades of the 1980s, 1990s, and 2000s and considers how shifts to postdisciplinarity might inform practices in the art academy today. It considers legacies of modernity to disclose methodological and ideological scaffolds upon which studio art…

  20. Construction of new operation interface for the LABIHS simulator using the ELIPSE E3 studio software

    Energy Technology Data Exchange (ETDEWEB)

    Augusto, Silas C.; Oliveira, Mauro V., E-mail: silas@ien.gov.b, E-mail: mvitor@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2011-07-01

    The Human-System Interface Laboratory (LABIHS), located at the Instituto de Engenharia Nuclear (IEN), has a compact simulator that simulate the processes of a pressurized water reactor nuclear power plant of 930 MWe of power. This simulator is composed by a HP-UX workstation computer, where the simulation software runs, and a set of computer stations, that represent an advanced control room, where the simulator is operated by software control panels that represent several systems of the simulated nuclear power plant. The current HSIs for the LABIHS simulator was built using iLog software tool. The development of new human-system interfaces (HSIs) for the simulator is one of the research fields of LABIHS. This paper presents the screen components development process for a new HSI for the LABIHS simulator, using the software Elipse{sup TM} E3 Studio. These new components developed using the E3 Studio are similar to the ones used in the current simulator interface. The article shows some comparisons between the component and screen development with Elipse{sup TM} E3 Studio processes and using iLog Studio. (author)

  1. The Impact of Social Interaction and Communications on Innovation in the Architectural Design Studio

    Directory of Open Access Journals (Sweden)

    Bhzad Sidawi

    2012-07-01

    Full Text Available Design is a social phenomenon and researchers suggest that social interaction, negotiations and communication between designers are essential to initiate creativity. Within the design studio environment, a number of factors affect the healthy social interaction and design negotiations, such as the teaching style of tutors and the culture that governs a design studio’s environment. This may in turn affect the utilization of the outcome of negotiations in the design project. Design studio students from the third to fifth years at the College of Architecture, University of Dammam (UD, the Kingdom of Saudi Arabia (KSA, were surveyed to find out how far the design studio’s culture and communication would impact the production of innovative design projects. The results show that frequent communication and the establishment’s shared grounds are essential to develop knowledge and positively influence the design outcome. On the other hand, the research found that negative qualities on a personal level and on that of a design studio environment would hinder a student’s creativity. However, to develop students’ design/innovative abilities, the researcher recommends that certain measures should be considered. These would include transforming the design studio into an interactive and friendly learning environment, adjusting the teaching methodology, and developing interactive communication abilities of students and tutors.

  2. Jungle Quest: Adventures in Creating a HyperStudio Word Study Program.

    Science.gov (United States)

    Ludwig, Jessica; Green, Lauren

    This paper describes the development, design, and implementation of an educational multimedia program. The program, "Jungle Quest," combined HyperStudio and word study in a game for classroom use. Methods for word study provide a carefully sequenced teaching of phonics, vocabulary, and spelling following children's natural stages of…

  3. Speakeasy Studio and Cafe: Information Literacy, Web-based Library Instruction, and Technology.

    Science.gov (United States)

    Jacobs, Mark

    2001-01-01

    Discussion of academic library instruction and information literacy focuses on a Web-based program developed at Washington State University called Speakeasy Studio and Cafe that is used for bibliographic instruction. Highlights include the research process; asking the right question; and adapting to students' differing learning styles. (LRW)

  4. A Survey of Utopia—Creating Filmic Travelogues in Architectural Design Studio Education †

    Directory of Open Access Journals (Sweden)

    Johannes Müntinga

    2018-02-01

    Full Text Available This paper investigates the potential of the creation of filmic travelogues in architectural design studio education. It looks at student works from a studio conducted at RWTH Aachen University in the summer term of 2017 and explores how the works construct meaning from and reflect on architectural reference in an active creative process. The assignment of the studio was to create a travelogue of a 4-day excursion to Belgium and the South of England in the form of a short film. Inspired by Patrick Keiller’s film Robinson in Space, the students were invited to explore the Situationist techniques of Drifting and Psychogeography, and to use them in their visual storytelling. The studio´s title A Survey of Utopia makes reference to the architectural and urbanistic projects that were visited: visionary residential projects from the 1960s to 1980s, built by well-known architects of this period, such as Lucien Kroll, Walter Segal and Leon Krier. The term utopia hints at the projects shared interest in radical change and bold new architectural approaches, even though each pursues its own distinct kind of utopia.

  5. Construction of new operation interface for the LABIHS simulator using the ELIPSE E3 studio software

    International Nuclear Information System (INIS)

    Augusto, Silas C.; Oliveira, Mauro V.

    2011-01-01

    The Human-System Interface Laboratory (LABIHS), located at the Instituto de Engenharia Nuclear (IEN), has a compact simulator that simulate the processes of a pressurized water reactor nuclear power plant of 930 MWe of power. This simulator is composed by a HP-UX workstation computer, where the simulation software runs, and a set of computer stations, that represent an advanced control room, where the simulator is operated by software control panels that represent several systems of the simulated nuclear power plant. The current HSIs for the LABIHS simulator was built using iLog software tool. The development of new human-system interfaces (HSIs) for the simulator is one of the research fields of LABIHS. This paper presents the screen components development process for a new HSI for the LABIHS simulator, using the software Elipse TM E3 Studio. These new components developed using the E3 Studio are similar to the ones used in the current simulator interface. The article shows some comparisons between the component and screen development with Elipse TM E3 Studio processes and using iLog Studio. (author)

  6. The Lure of Non-Credit Studio Art Classes for Adult Learners

    Science.gov (United States)

    Murray, Gina C.

    2012-01-01

    The purpose of this study was to examine the motivation and satisfaction of adult learners who participated in non-credit studio art classes. Leisure motivation has been researched by educators, philosophers, psychologists, and social scientists (Candy, 1991; Brookfield, 2005: Dewey, 1980; Knowles, 1998; Maslow, 1970; Rogers, 1961, Stebbins,…

  7. The City at Play: "Second Life" and the Virtual Urban Planning Studio

    Science.gov (United States)

    Thomas, David; Hollander, Justin B.

    2010-01-01

    This study interrogates the idea of using videogames and game-like virtual worlds as a means to advance studio education pedagogy. Looking at a series of case studies of urban planning courses taught using "Second Life," the results describe the potentials, and limits, of this emerging digital media. Key findings are that the virtual worlds…

  8. AP Studio Art as an Enabling Constraint for Secondary Art Education

    Science.gov (United States)

    Graham, Mark A.

    2009-01-01

    Advanced Placement (AP) Studio Art is an influential force in secondary art education as is evident in the 31,800 portfolios submitted for review in 2008. From the perspectives of a high school educator and AP Reader, this author has observed how the constraints of the AP program can be used to generate support for high school art programs and…

  9. Exploring the Learning Problems and Resource Usage of Undergraduate Industrial Design Students in Design Studio Courses

    Science.gov (United States)

    Chen, Wenzhi

    2016-01-01

    Design is a powerful weapon for modern companies so it is important to have excellent designers in the industry. The purpose of this study is to explore the learning problems and the resources that students use to overcome problems in undergraduate industrial design studio courses. A survey with open-type questions was conducted to collect data.…

  10. Mechatronics Learning Studio: From "Play and Learn" to Industry-Inspired Green Energy Applications

    Science.gov (United States)

    Habash, R. W. Y.; Suurtamm, C.; Necsulescu, D.

    2011-01-01

    This paper describes the evolution of the teaching of electrical engineering to mechanical engineering students based on motivation and a pedagogical strategy incorporating interdisciplinary mechatronics projects in a learning studio environment. Implementation of student projects within the curriculum has been demonstrated to be highly…

  11. The Prefabricated Interior Design Studio: An Exploration into the History and Sustainability of Interior Prefabrication

    Science.gov (United States)

    Schneiderman, Deborah; Freihoefer, Kara

    2013-01-01

    This article examines the integration of prefabrication into an interior design studio. A review of the literature revealed that while there is a paucity of categorical research focused on this subject, the subject is historically significant with an abundance of evidence regarding the prefabrication of the interior environment dating back…

  12. Does the Medium Matter in Collaboration? Using Visually Supported Collaboration Technology in an Interior Design Studio

    Science.gov (United States)

    Cho, Ji Young; Cho, Moon-Heum; Kozinets, Nadya

    2016-01-01

    With the recognition of the importance of collaboration in a design studio and the advancement of technology, increasing numbers of design students collaborate with others in a technology-mediated learning environment (TMLE); however, not all students have positive experiences in TMLEs. One possible reason for unsatisfactory collaboration…

  13. Curiosity and Pedagogy: A Mixed-Methods Study of Student Experiences in the Design Studio

    Science.gov (United States)

    Smith, Korydon H.

    2010-01-01

    Curiosity is often considered the foundation of learning. There is, however, little understanding of how (or if) pedagogy in higher education affects student curiosity, especially in the studio setting of architecture, interior design, and landscape architecture. This study used mixed-methods to investigate curiosity among design students in the…

  14. Reflections on the Evolving Triad Tutorial in a Postgraduate Art Studio

    Science.gov (United States)

    Tripp, Sarah

    2016-01-01

    This article traces the evolution of the "triad tutorial". The triad model, predominantly used in the training of counsellors and psychotherapists, was originally combined with the art school tutorial model in the context of the Edinburgh Sculpture Workshop to enhance critical discourse between studio holders. The resulting hybrid, the…

  15. Teachers’ Perceptions About the HANDSON MOOC: A Learning Design Studio Case

    NARCIS (Netherlands)

    Garreta-Domingo, Muriel; Hernández-Leo, Davinia; Mor, Yishay; Sloep, Peter

    2018-01-01

    Recently, Massive Open Online Courses (MOOCs) have been proposed as relevant instruments for professional development. This paper reports on two editions of the HANDSON MOOC for teacher professional devel‐ opment. The MOOCs use the Learning Design Studio methodology as a peda‐ gogical framework, the

  16. 76 FR 5832 - International Business Machines (IBM), Software Group Business Unit, Optim Data Studio Tools QA...

    Science.gov (United States)

    2011-02-02

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,554] International Business Machines (IBM), Software Group Business Unit, Optim Data Studio Tools QA, San Jose, CA; Notice of... determination of the TAA petition filed on behalf of workers at International Business Machines (IBM), Software...

  17. An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios (Final Report, 2008)

    Science.gov (United States)

    EPA announced the availability of the final report, An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios. This report investigates the potential dioxin exposure to artists/hobbyists who use ball clay to make pottery and related products. Derm...

  18. Running distance education in studio-based art institutions: the way ...

    African Journals Online (AJOL)

    Fortunately, advancement in technology in the area of video-conferencing, offer greater capabilities for providing more interactive distance learning experience, which studio-based institutions can exploit. However, high cost of employing videoconferencing technology becomes the main obstacle for its adoption in ...

  19. Advanced Placement in Studio Art and Secondary Art Education Policy: Countering the Null Curriculum

    Science.gov (United States)

    Graham, Mark A.; Sims-Gunzenhauser, Alice

    2009-01-01

    Because of education reform policy and misconceptions about artistry and artistic assessment, visual art education remains in the margins of high school education. One response to the lack of supportive arts education policy is the Advanced Placement (AP) Studio Art Program, a visual arts assessment at the high school level that engages large…

  20. Using Cascading Style Sheets to Design a Fly-Out Menu with Microsoft Visual Studio

    Science.gov (United States)

    Liu, Chang; Downing, Charles

    2010-01-01

    The menu has become an integrated component within nearly all professionally designed websites. This teaching tip presents a no-code way to design either a vertical or a horizontal fly-out menu by using Cascading Style Sheets (CSS) within Microsoft Visual Studio 2008. The approach described in this tip helps students fully understand how to…

  1. A "Knowledge Trading Game" for Collaborative Design Learning in an Architectural Design Studio

    Science.gov (United States)

    Wang, Wan-Ling; Shih, Shen-Guan; Chien, Sheng-Fen

    2010-01-01

    Knowledge-sharing and resource exchange are the key to the success of collaborative design learning. In an architectural design studio, design knowledge entails learning efforts that need to accumulate and recombine dispersed and complementary pieces of knowledge. In this research, firstly, "Knowledge Trading Game" is proposed to be a way for…

  2. Inside the Actors' Studio: Exploring Dietetics Education Practices through Dialogical Inquiry

    Science.gov (United States)

    Fox, Ann L.; Gingras, Jacqui

    2012-01-01

    Two colleagues, Ann and Jacqui, came together, within the safety of an imagined actors' studio, to explore the challenges that Ann faced in planning a new graduate program in public health nutrition. They met before, during, and after program implementation to discuss Ann's experiences, and audio-taped and transcribed the discussions. When all…

  3. An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios (External Review Draft)

    Science.gov (United States)

    EPA has released an external review draft entitled, An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios(External Review Draft). The public comment period and the external peer-review workshop are separate processes that provide opportunities ...

  4. A Socio-Cognitive Approach to Knowledge Construction in Design Studio through Blended Learning

    Science.gov (United States)

    Kocaturk, Tuba

    2017-01-01

    This paper results from an educational research project that was undertaken by the School of Architecture, at the University of Liverpool funded by the Higher Education Academy in UK. The research explored technology driven shifts in architectural design studio education, identified their cognitive effects on design learning and developed an…

  5. Using Active Learning in a Studio Classroom to Teach Molecular Biology

    Science.gov (United States)

    Nogaj, Luiza A.

    2013-01-01

    This article describes the conversion of a lecture-based molecular biology course into an active learning environment in a studio classroom. Specific assignments and activities are provided as examples. The goal of these activities is to involve students in collaborative learning, teach them how to participate in the learning process, and give…

  6. Balancing Expression and Structure in Game Design: Developing Computational Participation Using Studio-Based Design Pedagogy

    Science.gov (United States)

    DeVane, Ben; Steward, Cody; Tran, Kelly M.

    2016-01-01

    This article reports on a project that used a game-creation tool to introduce middle-school students ages 10 to 13 to problem-solving strategies similar to those in computer science through the lens of studio-based design arts. Drawing on historic paradigms in design pedagogy and contemporary educational approaches in the digital arts to teach…

  7. The Role of Healthy Social Interaction and Communications in Provoking Creativity in the Design Studio

    Science.gov (United States)

    Sidawi, Bhzad

    2016-01-01

    Design is a social phenomenon and researchers suggest that negotiations and communications between designers are essential to initiate creativity. Within the design studio environment, a number of factors affect the healthy social interaction and design negotiations, such as the teaching style of tutors and the culture that governs a design studio…

  8. Identification of the receptors for somatostatin (SST) and cortistatin (CST) in chickens and investigation of the roles of cSST28, cSST14, and cCST14 in inhibiting cGHRH1-27NH2-induced growth hormone secretion in cultured chicken pituitary cells.

    Science.gov (United States)

    Meng, Fengyan; Huang, Guian; Gao, Shunyu; Li, Juan; Yan, Zhenxin; Wang, Yajun

    2014-03-25

    Somatostatin receptors (SSTRs) are proposed to mediate the actions of somatostatin (SST) and its related peptide, cortistatin (CST), in vertebrates. However, the identity, functionality, and tissue expression of these receptors remain largely unknown in most non-mammalian vertebrates including birds. In this study, five SSTRs (named cSSTR1, cSSTR2, cSSTR3, cSSTR4, cSSTR5) were cloned from chicken brain by RT-PCR. Using a pGL3-CRE-luciferase reporter system, we demonstrated that activation of each cSSTR expressed in CHO cells by cSST28, cSST14 and cCST14 treatment could inhibit forskolin-induced luciferase activity of CHO cells, indicating the functional coupling of all cSSTRs to Gi protein(s). Interestingly, cSSTR1-4 expressed in CHO cells could be activated by cSST28, cSST14 and cCST14 with high potencies, suggesting that they may function as the receptors common for these peptides. In contrast, cSSTR5 could be potently activated by cSST28 only, indicating that it is a cSST28-specific receptor. Using RT-PCR, wide expression of cSSTRs was detected in chicken tissues including pituitary. In accordance with their expression in pituitary, cSST28, cSST14, and cCST14 were demonstrated to inhibit basal and novel cGHRH1-27NH2-induced GH secretion in cultured chicken pituitary cells dose-dependently (0-10nM) by Western blot analysis, suggesting the involvement of cSSTR(s) common for these peptides in mediating their inhibitory actions. Collectively, our study establishes a molecular basis to elucidate the roles of SST/CST in birds and provide insights into the roles of SST/CST in vertebrates, such as their conserved actions on pituitary. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  9. Appropriate teaching and learning strategies for the architectural design process in pedagogic design studios

    Directory of Open Access Journals (Sweden)

    Ashraf M. Soliman

    2017-06-01

    Full Text Available The national qualification framework of a country requires a certain level of knowledge and complexity of skills for an academic degree to be recognized. For architectural programs, student workload is heavy on design courses. Therefore, each course must be carefully developed to ensure that students are not overloaded. Teaching and learning strategies have different implications for courses, which occasionally result in overloading the students. This research aims to study the three main pillars of teaching and learning strategies for each design phase in pedagogic design studios. The most appropriate model for each teaching and learning strategy, including a set of the three main pillars, is then identified for each design phase. A practical strategy for managing design studios is also determined. The aforementioned three pillars are as follows: teaching and learning methods, assigned tasks or study aspects, and design communication techniques. Two research methods, namely, a literature review and a survey among design educators, are adopted. The literature review examines aspects that contribute to the design process and its phases, teaching methods, design skills, communication methods, and studio management strategies. On the basis of the literature review, the background of developments and practices in the design education process are used as constructive tools to develop the survey for design educators. Through the survey, the pillars of teaching and learning strategies that are frequently practiced in design studios are evaluated. Results of this study are classified into three ranks using the nature break classification method for numerical values. Subsequently, three priority models that correspond to teaching and learning strategies, as well as to the required skills and capabilities, are established. A group-based strategy with an interdisciplinary approach is also determined to be the most suitable technique for managing the

  10. Final Technical Report for the Energy Frontier Research Center Understanding Charge Separation and Transfer at Interfaces in Energy Materials (EFRC:CST)

    Energy Technology Data Exchange (ETDEWEB)

    Vanden Bout, David A. [Univ. of Texas, Austin, TX (United States)

    2015-09-14

    Our EFRC was founded with the vision of creating a broadly collaborative and synergistic program that would lead to major breakthroughs in the molecular-level understanding of the critical interfacial charge separation and charge transfer (CST) processes that underpin the function of candidate materials for organic photovoltaic (OPV) and electrical-energy-storage (EES) applications. Research in these energy contexts shares an imposing challenge: How can we understand charge separation and transfer mechanisms in the presence of immense materials complexity that spans multiple length scales? To address this challenge, our 50-member Center undertook a total of 28 coordinated research projects aimed at unraveling the CST mechanisms that occur at interfaces in these nanostructured materials. This rigorous multi-year study of CST interfaces has greatly illuminated our understanding of early-timescale processes (e.g., exciton generation and dissociation dynamics at OPV heterojunctions; control of Li+-ion charging kinetics by surface chemistry) occurring in the immediate vicinity of interfaces. Program outcomes included: training of 72 graduate student and postdoctoral energy researchers at 5 institutions and spanning 7 academic disciplines in science and engineering; publication of 94 peer-reviewed journal articles; and dissemination of research outcomes via 340 conference, poster and other presentations. Major scientific outcomes included: implementation of a hierarchical strategy for understanding the electronic communication mechanisms and ultimate fate of charge carriers in bulk heterojunction OPV materials; systematic investigation of ion-coupled electron transfer processes in model Li-ion battery electrode/electrolyte systems; and the development and implementation of 14 unique technologies and instrumentation capabilities to aid in probing sub-ensemble charge separation and transfer mechanisms.

  11. Appropriate Pedagogical Approaches For Conduct of Site Planning and Built Environment Studio in Spatial Planning Education Programs

    Directory of Open Access Journals (Sweden)

    Valliappan Alagappan

    2015-09-01

    Full Text Available Spatial planning education is multi-disciplinary in nature and particularly site planning needs exposure to Engineering, Architectural, Landscape, Sociological, Economic, and Infrastructural aspects. The curriculum of the spatial planning program introduces the site-planning studio (multi-level design and planning at the initial semesters without introduction of single space design and planning. Due to inadequate exposure the students find it difficult to plan and design residential layouts in the planning studio. The site-planning studio provides a good understanding of how the articulation of density can modify the built form and environment. There are considerable lacunae in the adopted approaches of site planning studios in various planning schools. The author discusses in detail the varied methodologies and approaches adopted in site planning and built environment studio programs. The two pedagogical studios methods experimented in the site-planning studio were discussed at length. One method discusses from unit level planning and designing to block and neighborhood level and other method discusses from neighborhood to block and unit level. Within these two studio pedagogical methodologies, for conduct of site planning exercises two approaches were generally adopted i.e block-based approach and Design based approach. The characteristic features, outcomes, advantages and disadvantages of each methodologies /approach offer an understanding of how site-planning studios have to be taught in the planning program. The author emphasizes the importance of a gradual progression from a single space design and planning to multi-level design and planning for enhanced comprehension of students.

  12. Design of a microwave calorimeter for the microwave tokamak experiment

    International Nuclear Information System (INIS)

    Marinak, M.

    1988-01-01

    The initial design of a microwave calorimeter for the Microwave Tokamak Experiment is presented. The design is optimized to measure the refraction and absorption of millimeter rf microwaves as they traverse the toroidal plasma of the Alcator C tokamak. Techniques utilized can be adapted for use in measuring high intensity pulsed output from a microwave device in an environment of ultra high vacuum, intense fields of ionizing and non-ionizing radiation and intense magnetic fields. 16 refs

  13. Microwave engineering concepts and fundamentals

    CERN Document Server

    Khan, Ahmad Shahid

    2014-01-01

    Detailing the active and passive aspects of microwaves, Microwave Engineering: Concepts and Fundamentals covers everything from wave propagation to reflection and refraction, guided waves, and transmission lines, providing a comprehensive understanding of the underlying principles at the core of microwave engineering. This encyclopedic text not only encompasses nearly all facets of microwave engineering, but also gives all topics—including microwave generation, measurement, and processing—equal emphasis. Packed with illustrations to aid in comprehension, the book: •Describes the mathematical theory of waveguides and ferrite devices, devoting an entire chapter to the Smith chart and its applications •Discusses different types of microwave components, antennas, tubes, transistors, diodes, and parametric devices •Examines various attributes of cavity resonators, semiconductor and RF/microwave devices, and microwave integrated circuits •Addresses scattering parameters and their properties, as well a...

  14. Balanced microwave filters

    CERN Document Server

    Hong, Jiasheng; Medina, Francisco; Martiacuten, Ferran

    2018-01-01

    This book presents and discusses strategies for the design and implementation of common-mode suppressed balanced microwave filters, including, narrowband, wideband, and ultra-wideband filters This book examines differential-mode, or balanced, microwave filters by discussing several implementations of practical realizations of these passive components. Topics covered include selective mode suppression, designs based on distributed and semi-lumped approaches, multilayer technologies, defect ground structures, coupled resonators, metamaterials, interference techniques, and substrate integrated waveguides, among others. Divided into five parts, Balanced Microwave Filters begins with an introduction that presents the fundamentals of balanced lines, circuits, and networks. Part 2 covers balanced transmission lines with common-mode noise suppression, including several types of common-mode filters and the application of such filters to enhance common-mode suppression in balanced bandpass filters. Next, Part 3 exa...

  15. Microwave Tokamak Experiment

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    The Microwave Tokamak Experiment, now under construction at the Laboratory, will use microwave heating from a free-electron laser. The intense microwave pulses will be injected into the tokamak to realize several goals, including a demonstration of the effects of localized heat deposition within magnetically confined plasma, a better understanding of energy confinement in tokamaks, and use of the new free-electron laser technology for plasma heating. The experiment, soon to be operational, provides an opportunity to study dense plasmas heated by powers unprecedented in the electron-cyclotron frequency range required by the especially high magnetic fields used with the MTX and needed for reactors. 1 references, 5 figures, 3 tables

  16. Microwave-assisted Chemical Transformations

    Science.gov (United States)

    In recent years, there has been a considerable interest in developing sustainable chemistries utilizing green chemistry principles. Since the first published report in 1986 by Gedye and Giguere on microwave assisted synthesis in household microwave ovens, the use of microwaves as...

  17. PHYSICS OF MICROWAVES IN MICROSCOPY

    NARCIS (Netherlands)

    KOK, LP

    1990-01-01

    Microwave technology can help in the preparation of samples for microscopy in many different ways. This paper discusses the physics of microwaves. It gives the theoretical background to understand the practical procedures. Some peculiarities in the optics of microwaves are pointed out. Diffusion

  18. Studio caso-controllo su pazienti affetti da legionellosi: risultati preliminari di una indagine multicentrica

    Directory of Open Access Journals (Sweden)

    P. Borella

    2003-05-01

    Full Text Available

    Obiettivo: nell’ambito dello studio multicentrico sulla
    legionellosi in Italia, è stata effettuata una sorveglianza sui pazienti affetti da polmonite per valutare la frequenza d’infezioni nosocomiali e comunitarie da Legionella e, sui casi individuati, viene condotto uno studio caso-controllo per approfondire le conoscenze sui fattori di rischio correlati alla malattia.

    Metodi: la sorveglianza della legionellosi è stata allestita in 6 ospedali, utilizzando come test diagnostici la ricerca dell’Ag urinario, colture da escreato e sieroconversione.
    Per lo studio caso-controllo è stata allestita una scheda sulle modalità di reclutamento dei casi e dei controlli, sono state definite le analisi chimico-cliniche e immunologiche da effettuare sui soggetti reclutati, e predisposto un questionario per la raccolta d’informazioni sui fattori di rischio.

    Risultati: su 2.287 soggetti affetti da polmonite sono stati riscontrati 84 casi di legionellosi, per la maggior parte (n.76 di tipo comunitario. Tra i casi individuati, 60 sono stati reclutati per lo studio caso-controllo e sono stati associati a 117 controlli, una parte affetti da polmonite diversa da legionellosi, una parte sani. Nei soggetti affetti da legionellosi, la ferritina serica era significativamente più
    elevata rispetto ai controlli, mentre il numero delle
    cellule natural killer era significativamente inferiore.
    Lo studio dei possibili fattori di rischio associati alla malattia non ha evidenziato differenze significative tra i casi ed i controlli per le abitudini personali e le condizioni espositive ambientali.

    Conclusioni: questa indagine ha permesso di verificare
    che circa il 4% delle polmoniti ricoverate sono da attribuirsi a Legionella. Gli 8 casi nosocomiali sono stati individuati in 3 degli ospedali sorvegliati

  19. Fundamentals of microwave photonics

    CERN Document Server

    Urick, V J; McKinney , Jason D

    2015-01-01

    A comprehensive resource to designing andconstructing analog photonic links capable of high RFperformanceFundamentals of Microwave Photonics provides acomprehensive description of analog optical links from basicprinciples to applications.  The book is organized into fourparts. The first begins with a historical perspective of microwavephotonics, listing the advantages of fiber optic links anddelineating analog vs. digital links. The second section coversbasic principles associated with microwave photonics in both the RFand optical domains.  The third focuses on analog modulationformats-starti

  20. Microwave Assisted Drug Delivery

    DEFF Research Database (Denmark)

    Jónasson, Sævar Þór; Zhurbenko, Vitaliy; Johansen, Tom Keinicke

    2014-01-01

    In this work, the microwave radiation is adopted for remote activation of pharmaceutical drug capsules inside the human body in order to release drugs at a pre-determined time and location. An array of controllable transmitting sources is used to produce a constructive interference at a certain...... focus point inside the body, where the drugs are then released from the specially designed capsules. An experimental setup for microwave activation has been developed and tested on a body phantom that emulates the human torso. A design of sensitive receiving structures for integration with a drug...

  1. Microwave circulator design

    CERN Document Server

    Linkhart, Douglas K

    2014-01-01

    Circulator design has advanced significantly since the first edition of this book was published 25 years ago. The objective of this second edition is to present theory, information, and design procedures that will enable microwave engineers and technicians to design and build circulators successfully. This resource contains a discussion of the various units used in the circulator design computations, as well as covers the theory of operation. This book presents numerous applications, giving microwave engineers new ideas about how to solve problems using circulators. Design examples are provided, which demonstrate how to apply the information to real-world design tasks.

  2. EDITORIAL: Microwave Moisture Measurements

    Science.gov (United States)

    Kaatze, Udo; Kupfer, Klaus; Hübner, Christof

    2007-04-01

    Microwave moisture measurements refer to a methodology by which the water content of materials is non-invasively determined using electromagnetic fields of radio and microwave frequencies. Being the omnipresent liquid on our planet, water occurs as a component in most materials and often exercises a significant influence on their properties. Precise measurements of the water content are thus extremely useful in pure sciences, particularly in biochemistry and biophysics. They are likewise important in many agricultural, technical and industrial fields. Applications are broad and diverse, and include the quality assessment of foodstuffs, the determination of water content in paper, cardboard and textile production, the monitoring of moisture in sands, gravels, soils and constructions, as well as the measurement of water admixtures to coal and crude oil in reservoirs and in pipelines. Microwave moisture measurements and evaluations require insights in various disciplines, such as materials science, dielectrics, the physical chemistry of water, electrodynamics and microwave techniques. The cooperation of experts from the different fields of science is thus necessary for the efficient development of this complex discipline. In order to advance cooperation the Workshop on Electromagnetic Wave Interaction with Water and Moist Substances was held in 1993 in Atlanta. It initiated a series of international conferences, of which the last one was held in 2005 in Weimar. The meeting brought together 130 scientists and engineers from all over the world. This special issue presents a collection of some selected papers that were given at the event. The papers cover most topics of the conference, featuring dielectric properties of aqueous materials, electromagnetic wave interactions, measurement methods and sensors, and various applications. The special issue is dedicated to Dr Andrzej W Kraszewski, who died in July 2006 after a distinguished career of 48 years in the research of

  3. Studio nel sistema modello Saccharomyces cerevisiae di mutazioni patologiche nel gene POLG codificante la DNA polimerasi mitocondriale

    OpenAIRE

    Baruffini, Enrico

    2008-01-01

    Il lavoro riportato in questa tesi concerne lo studio nel sistema modello Saccharomyces cerevisiae di mutazioni patologiche nel gene umano POLG che codifica per la polimerasi mitocondriale gamma associate a patologie mitocondriali. Nello studio sono state introdotte sette mutazioni in POLG nelle posizioni equivalenti del gene ortologo di lievito MIP1. E’ stato studiato l’effetto di queste mutazioni sulla stabilità del DNA mitocondriale, dimostrando che tutte le mutazioni provocano un incremen...

  4. BALANCE IN CONTROL: The Case of an Urban Design Studio at the University of Arizona

    Directory of Open Access Journals (Sweden)

    Susannah Dickinson

    2013-03-01

    Full Text Available For the first time, in history, the majority of human beings live in urban regions. Although cities are among the most complex human-made systems, they are unfortunately environmentally, economically and socially unsustainable. How can we change this? This paper discusses an undergraduate architectural design studio, Future Cities, which pushed for an environmentally holistic design process, moving past the idea of single, object-like buildings. The studio taught various digital and research methodologies to aid in the complex issue of urban form. Emphasis was placed on balancing the huge amounts of data and information that is available in our technological age, with the need to retain the human perspective and experience.

  5. Microwave stability at transition

    International Nuclear Information System (INIS)

    Holt, J.A.; Colestock, P.L.

    1995-05-01

    The question of microwave stability at transition is revisited using a Vlasov approach retaining higher order terms in the particle dynamics near the transition energy. A dispersion relation is derived which can be solved numerically for the complex frequency in terms of the longitudinal impedance and other beam parameters. Stability near transition is examined and compared with simulation results

  6. Nonlinear Microwave Optomechanics

    NARCIS (Netherlands)

    Shevchuk, O.

    2017-01-01

    The nonlinearity is essential for creation of non-classical states of the cavity or mechanical resonator such as squeezed or cat states. A microwave cavity can be made nonlinear by, for instance, adding Josephson junctions. The mechanical resonator is inherently nonlinear. The radiation pressure

  7. Leakage of Microwave Ovens

    Science.gov (United States)

    Abdul-Razzaq, W.; Bushey, R.; Winn, G.

    2011-01-01

    Physics is essential for students who want to succeed in science and engineering. Excitement and interest in the content matter contribute to enhancing this success. We have developed a laboratory experiment that takes advantage of microwave ovens to demonstrate important physical concepts and increase interest in physics. This experiment…

  8. Commercial microwave space power

    International Nuclear Information System (INIS)

    Siambis, J.; Gregorwich, W.; Walmsley, S.; Shockey, K.; Chang, K.

    1991-01-01

    This paper reports on central commercial space power, generating power via large scale solar arrays, and distributing power to satellites via docking, tethering or beamed power such as microwave or laser beams, that is being investigated as a potentially advantageous alternative to present day technology where each satellite carries its own power generating capability. The cost, size and weight for electrical power service, together with overall mission requirements and flexibility are the principal selection criteria, with the case of standard solar array panels based on the satellite, as the reference point. This paper presents and investigates a current technology design point for beamed microwave commercial space power. The design point requires that 25 kW be delivered to the user load with 30% overall system efficiency. The key elements of the design point are: An efficient rectenna at the user end; a high gain, low beam width, efficient antenna at the central space power station end, a reliable and efficient cw microwave tube. Design trades to optimize the proposed near term design point and to explore characteristics of future systems were performed. Future development for making the beamed microwave space power approach more competitive against docking and tethering are discussed

  9. Fisica. I progressi nello studio delle particelle piu' abbondanti ma piu mistriose

    CERN Multimedia

    Bilenky, Samoil Mikhelevich

    2003-01-01

    "Caccia ai neutrino conferme all'inutizione di Pontecorvo: hanno una masa (sia pure minima) e i loro 3 tipi si mutano l'uno nell'altro fisica i progressi nello studio delle particelle piu' abbondanti ma piu' misteriose". [The hunt for the neutrinos. Pontecorvo's theory has been confirmed: the neutrino has a mass (though minimal). It switches from one of the 3 types into the others].

  10. UNO STUDIO SUL TERREMOTO DEL GRAN SASSO D' ITALIA DEL 5 SETTEMBRE 1950

    Directory of Open Access Journals (Sweden)

    L. Marcelli

    1951-06-01

    Full Text Available Nel presente lavoro si espongono i risultati della prima parte diuno studio sul terremoto del Gran Sasso d'Italia avvenuto il 5 settembre10.50. Si riportano le notizie macrosismiche, e viene tracciatala rete delle isosiste. Calcolata la magnitudo, l'energia, l'epicentro incoordinate ortogonali e geografiche, le velocità delle Pg, Pn, Sg, Sncon le relative dromocrone, il tempo origine,

  11. Studio dell’ossidazione a caldo di materiali altolegati per caldaie industriali

    OpenAIRE

    Rizzi, M.; Guerrini, E.; Trasatti, S. P.

    2013-01-01

    Al fine di migliorare la durabilità di caldaie ad elevata efficienza per la produzione di energia, alimentate daipiù diversi combustibili, è essenziale sviluppare ed applicare materiali per alte temperature con caratteristiche diresistenza a corrosione che ne garantiscano una “life time” elevata anche nelle condizioni di servizio più severe.Scopo di questo studio è quello di investigare il comportamento a corrosione, con particolare attenzione aimeccanismi di ossidazione a caldo, di alcuni ac...

  12. Segmentation, Targeting, dan Positioning Studio Tato di Surabaya dalam Perkembangan Gaya Hidup

    OpenAIRE

    Anang Tri Wahyudi

    2013-01-01

    This study attempts to examine in depth the influence of lifestyle on the orientation of recipients (tattoo users) to the art of tattooing, which is independent of the value of a valuable commodity, and explore the extent to which the process of tattoo studios’ segmentation, targeting, and positioning in managing a tattoo studio. This study uses qualitative research methods with interpretive phenomenological foundation of thinking, which is oriented to truth that is subjective to informants, ...

  13. Teaching For Art Criticism: Incorporating Feldman’s Critical Analysis Learning Model In Students’ Studio Practice

    OpenAIRE

    Maithreyi Subramaniam; Jaffri Hanafi; Abu Talib Putih

    2016-01-01

    This study adopted 30 first year graphic design students’ artwork, with critical analysis using Feldman’s model of art criticism. Data were analyzed quantitatively; descriptive statistical techniques were employed. The scores were viewed in the form of mean score and frequencies to determine students’ performances in their critical ability. Pearson Correlation Coefficient was used to find out the correlation between students’ studio practice and art critical ability scores. The...

  14. IBM Cognos Report Studio as an Effective Tool for Human Capital Reporting

    OpenAIRE

    Zinchenko, Yulia

    2013-01-01

    Main topic discussed in this diploma thesis is corporate reporting in terms of Human Capital using Business Intelligence tools, specifically IBM Cognos Report Studio. One of the objectives is to show step-by-step methodology of creating complex dynamic report, which includes data structure modeling, layout design and quality check. Another objective is to conduct Cost-Benefit Analysis for a real-life project, which is focused on recreating of Excel-based report in Cognos-based environment in ...

  15. Studio clinico-dermatoscopico e istopatologico di follicoliti superficiali del cuoio capelluto

    OpenAIRE

    Starace, Michela

    2016-01-01

    Questa tesi si basa su uno studio retrospettivo clinico, dermatoscopico e istopatologico sulle follicoliti superficiali del cuoio capelluto. Le follicoliti superficiali del cuoio capelluto rappresentato un gruppo di patologie di frequente riscontro nella pratica ambulatoriale, ma poco descritte in letteratura. La chiave per comprendere questo vasto argomento della tricologia è capire prima di tutto la sede e le caratteristiche dell’insulto infiammatorio a livello del follicolo pilifero...

  16. Functional medicine cabinet for the simulation studio at Lahti University of Applied Sciences

    OpenAIRE

    Gustafsson, Emilia; Virtanen, Essi; Tuikkanen, Joe

    2016-01-01

    The aim of this functional thesis was to create a more authentic simulation environment for the faculty of social and health care at Lahti University of Applied Sciences by updating the contents of the already existing medicine cabinet in the simulation studio. The purpose was to enable the nursing students to familiarize themselves with a medicine cabinet that would be as close as possible to the cabinets found in clinical placements and future work places. A pharmacology teacher in Lah...

  17. Design studio as a life space in architectural education: privacy requirements

    OpenAIRE

    Demirbaş, Özgen Osman

    1997-01-01

    Ankara : The Department of Interior Architecture and Environmental Design and the Institute of Fine Arts of Bilkent Univ., 1997. Thesis (Master's) -- Bilkent University, 1997. Includes bibliographical refences. There is a very important relationship between the educational outcomes and the architectural design of educational facilities. The most commonly used space in an architectural education is the design studio. Therefore, it is claimed that there should be a living process in a ...

  18. ARCHITECTURAL FORM CREATION IN THE DESIGN STUDIO: PHYSICAL MODELING AS AN EFFECTIVE DESIGN TOOL

    Directory of Open Access Journals (Sweden)

    Wael Abdelhameed

    2011-11-01

    Full Text Available This research paper attempts to shed more light on an area of the design studio, which concerns with the use of physical modeling as a design medium in architectural form creation. An experiment has been carried out during an architectural design studio in order to not only investigate physical modeling as a tool of form creation but also improve visual design thinking that students employ while using this manual tool. To achieve the research objective, a method was proposed and applied to track form creation processes, based upon three types of operation, namely: sketching transformations, divergent physical-modeling transformations, and convergent physical-modeling transformations. The method helps record the innovative transitions of form during conceptual designing in a simple way. Investigating form creation processes and activities associated with visual design thinking enables the research to conclude to general results of the role of physical modeling in the conceptual phase of designing, and to specific results of the methods used in this architectural design studio experiment.

  19. Interest-Driven Learning Among Middle School Youth in an Out-of-School STEM Studio

    Science.gov (United States)

    Evans, Michael A.; Lopez, Megan; Maddox, Donna; Drape, Tiffany; Duke, Rebekah

    2014-10-01

    The concept of connected learning proposes that youth leverage individual interest and social media to drive learning with an academic focus. To illustrate, we present in-depth case studies of Ryan and Sam, two middle-school-age youth, to document an out-of-school intervention intended to direct toward intentional learning in STEM that taps interest and motivation. The investigation focused on how Ryan and Sam interacted with the designed elements of Studio STEM and whether they became more engaged to gain deeper learning about science concepts related to energy sustainability. The investigation focused on the roles of the engineering design process, peer interaction, and social media to influence youth interest and motivation. Research questions were based on principles of connected learning (e.g., self-expression, lower barriers to expertise, socio-technical supports) with data analyzed within a framework suggested by discursive psychology. Analyzing videotaped excerpts of interactions in the studio, field notes, interview responses, and artifacts created during the program resulted in the following findings: problem solving, new media, and peer interaction as designed features of Studio STEM elicited evidence of stimulating interest in STEM for deeper learning. Further research could investigate individual interest-driven niches that are formed inside the larger educational setting, identifying areas of informal learning practice that could be adopted in formal settings. Moreover, aspects of youth's STEM literacy that could promote environmental sustainability through ideation, invention, and creativity should be pursued.

  20. mzStudio: A Dynamic Digital Canvas for User-Driven Interrogation of Mass Spectrometry Data.

    Science.gov (United States)

    Ficarro, Scott B; Alexander, William M; Marto, Jarrod A

    2017-08-01

    Although not yet truly 'comprehensive', modern mass spectrometry-based experiments can generate quantitative data for a meaningful fraction of the human proteome. Importantly for large-scale protein expression analysis, robust data pipelines are in place for identification of un-modified peptide sequences and aggregation of these data to protein-level quantification. However, interoperable software tools that enable scientists to computationally explore and document novel hypotheses for peptide sequence, modification status, or fragmentation behavior are not well-developed. Here, we introduce mzStudio, an open-source Python module built on our multiplierz project. This desktop application provides a highly-interactive graphical user interface (GUI) through which scientists can examine and annotate spectral features, re-search existing PSMs to test different modifications or new spectral matching algorithms, share results with colleagues, integrate other domain-specific software tools, and finally create publication-quality graphics. mzStudio leverages our common application programming interface (mzAPI) for access to native data files from multiple instrument platforms, including ion trap, quadrupole time-of-flight, Orbitrap, matrix-assisted laser desorption ionization, and triple quadrupole mass spectrometers and is compatible with several popular search engines including Mascot, Proteome Discoverer, X!Tandem, and Comet. The mzStudio toolkit enables researchers to create a digital provenance of data analytics and other evidence that support specific peptide sequence assignments.

  1. mzStudio: A Dynamic Digital Canvas for User-Driven Interrogation of Mass Spectrometry Data

    Directory of Open Access Journals (Sweden)

    Scott B. Ficarro

    2017-08-01

    Full Text Available Although not yet truly ‘comprehensive’, modern mass spectrometry-based experiments can generate quantitative data for a meaningful fraction of the human proteome. Importantly for large-scale protein expression analysis, robust data pipelines are in place for identification of un-modified peptide sequences and aggregation of these data to protein-level quantification. However, interoperable software tools that enable scientists to computationally explore and document novel hypotheses for peptide sequence, modification status, or fragmentation behavior are not well-developed. Here, we introduce mzStudio, an open-source Python module built on our multiplierz project. This desktop application provides a highly-interactive graphical user interface (GUI through which scientists can examine and annotate spectral features, re-search existing PSMs to test different modifications or new spectral matching algorithms, share results with colleagues, integrate other domain-specific software tools, and finally create publication-quality graphics. mzStudio leverages our common application programming interface (mzAPI for access to native data files from multiple instrument platforms, including ion trap, quadrupole time-of-flight, Orbitrap, matrix-assisted laser desorption ionization, and triple quadrupole mass spectrometers and is compatible with several popular search engines including Mascot, Proteome Discoverer, X!Tandem, and Comet. The mzStudio toolkit enables researchers to create a digital provenance of data analytics and other evidence that support specific peptide sequence assignments.

  2. The Unmade City: Subjectivity, Buffalo and the Sad Fate of Studio Arena Theatre

    Directory of Open Access Journals (Sweden)

    Julian Meyrick

    2016-09-01

    Full Text Available This article is a reflection on the disjointed and submerged cultural consciousness of the city of Buffalo, New York. It outlines the concept of subjectivity as put forward by the philosopher Alain Badiou, and maps it onto the history of Studio Arena, Buffalo’s main theatre company. Studio Arena Theatre (1927–2008 was one of the oldest and best known regional theatres in the USA. Its closure is a story fraught with conflict, misunderstanding and loss. That there has been no replacement theatre of comparable size and mandate says something about Buffalo’s diminished civic imaginary. While the link between the Theatre and the City is hard to formularise, it is a historically important relationship, going back to the time of Aristotle when theatre functioned as an informing resource for the lives of citizens. Those interested in urban renewal in Buffalo and other rust-belt US cities can profit not only from an understanding of Studio Arena Theatre’s history, but from a consideration of the kind of emotional engagement that this regional theatre represented.

  3. RE-USING OF THE HISTORICAL BUILDINGS IN THE CONTEXT OF SUSTAINABLITY: AN ARCHITECTURAL DESIGN STUDIO STUDY ON OLD GIRLS TEACHER TRAINING SCHOOL

    Directory of Open Access Journals (Sweden)

    M. Ulusoy

    2013-07-01

    Full Text Available Refunctioning is a widely used method for protecting historical structures. However, throughout architectural education, functioning historical structures and producing new designs in terms of historical pattern do not attract great attention within the framework of design studios. It is a fact that in such schools that abovementioned items are more popular, the connection between protection oriented studio and design studio is pretty weak. In this study refunctioning was discussed as a design studio topic in relation to the old girls' teacher training school and its immediate surroundings. The primary objective of this design studio is to increase architecture students' awareness in terms of visual and perceptual levels of project designs in historical patterns. Within the context of this manuscript, the experiences gained during design studio process were transferred and discussed.

  4. Pyrolysis of polystyrene waste in the presence of activated carbon in conventional and microwave heating using modified thermocouple.

    Science.gov (United States)

    Prathiba, R; Shruthi, M; Miranda, Lima Rose

    2018-03-22

    Pyrolysis process was experimented using two types of heating source, namely conventional and microwave. Polystyrene (PS) plastic waste was used as feedstock in a batch reactor for both the conventional (slow pyrolysis) and microwave pyrolysis. The effect of activated carbon to polystyrene ratio on (i) yield of oil, gas and residues (ii) reaction temperature (iii) reaction time were studied. Quality of oil from pyrolysis of polystyrene were assessed for the possible applicability in fuel production. Microwave power of 450 W and polymer to activated carbon ratio of 10:1, resulted in the highest oil yield of 93.04 wt.% with a higher heating value of 45 MJ kg -1 and a kinematic viscosity of 2.7 cSt. Microwave heating when compared to conventional heating method, exhibits a reaction temperature and time of 330 °C in 5.5 min, whereas in conventional heating system it was 418 °C in 60 min. The gas chromatography-mass spectrometry analysis of liquid oil from microwave pyrolysis predominantly yields alkenes of 8.44 wt.%, α-methyl styrene 0.96 wt.%, condensed ring aromatics 23.21 wt.% and benzene derivatives 26.77 wt.% when the polystyrene to activated carbon ratio was 10:1. Significant factor of using microwave heating is the amount of energy converted (kWh) is lesser than conventional heating. Copyright © 2018. Published by Elsevier Ltd.

  5. Planar Millimeter-Wave Antennas: A Comparative Study

    Directory of Open Access Journals (Sweden)

    K. Pitra

    2011-04-01

    Full Text Available The paper describes the design and the experimental verification of three types of wideband antennas. Attention is turned to the bow-tie antenna, the Vivaldi antenna and the spiral antenna designed for the operation at millimeter waves. Bandwidth, input impedance, gain, and directivity pattern are the investigated parameters. Antennas are compared considering computer simulations in CST Microwave Studio and measured data.

  6. Eigenmode simulations of third harmonic superconducting accelerating cavities for FLASH and the European XFEL

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Pei [Manchester Univ. (United Kingdom). School of Physics and Astronomy; Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Baboi, Nicoleta [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Jones, Roger M. [Manchester Univ. (United Kingdom). School of Physics and Astronomy; The Cockcroft Institute, Daresbury, Warrington (United Kingdom)

    2012-06-15

    The third harmonic nine-cell cavity (3.9 GHz) for FLASH and the European XFEL has been investigated using simulations performed with the computer code CST Microwave Studio registered. The band structure of monopole, dipole, quadrupole and sextupole modes for an ideal cavity has been studied. The higher order modes for the nine-cell structure are compared with that of the cavity mid-cell. The R/Q of these eigenmodes are calculated.

  7. Perancangan Dan Pembuatan Antena Mikrostrip Egg Dengan Slot Rugby Ball Yang Bekerja Pada Frekuensi Ultra Wideband (UWB)

    OpenAIRE

    Ir. Sigit ZKusmaryanto, M.Eng., Fredrick Yohanes., Rudy Yuwono, ST., M.Sc

    2014-01-01

    Penelitian ini membahas mengenai perancangan dan pembuatan antena mikrostrip dengan patch berbentuk egg dan slot berbentuk rugby ball pada ground plane nya sehingga antena tersebut dapat bekerja pada frekuensi UWB. Dimensi antena mikrostrip diperoleh melalui perhitungan dan proses optimasi. Simulator yang digunakan dalam menganalisa performansi antena adalah HFSS Ansoft dan CST Microwave Studio. Fabrikasi antena mikrostrip ini menggunakan bahan Phenolic White Paper – FR4 dengan konstanta diel...

  8. Performances study of UWB monopole antennas using half-elliptic radiator conformed on elliptical surface

    Science.gov (United States)

    Djidel, S.; Bouamar, M.; Khedrouche, D.

    2016-04-01

    This paper presents a performances study of UWB monopole antenna using half-elliptic radiator conformed on elliptical surface. The proposed antenna, simulated using microwave studio computer CST and High frequency simulator structure HFSS, is designed to operate in frequency interval over 3.1 to 40 GHz. Good return loss and radiation pattern characteristics are obtained in the frequency band of interest. The proposed antenna structure is suitable for ultra-wideband applications, which is, required for many wearable electronics applications.

  9. Interaction of Active MMIC with Package/Housing -Theory, Analysis and Measurement

    Directory of Open Access Journals (Sweden)

    A. Sarvaiya

    2014-09-01

    Full Text Available This paper presents enclosure effect comprehensive by 3D Electromagnetic modeling, simulation and measurement of active MMIC with Package/housing. When put inside a test box or package with a cavity, MMIC shows significant deviation from it RFOW measurement data. Cavity resonance’s adverse effects are analyzed by Eigen mode solver using CST Microwave Studio and RFOW measurement and in test box data is matched by simulating package/house with the best suited RF absorbers.

  10. Dipole stabilizer rods for 400 keV deuteron RFQ

    International Nuclear Information System (INIS)

    Sista, V.L.S. Rao; Srivastava, S.C.L.; Pande, Rajni; Roy, Shweta; Singh, P.

    2009-01-01

    In our 400 keV deuteron RFQ for neutron production, the destructive dipolar modes are very close to the required quadrupolar mode. In order to increase the spacing between the quadrupole and dipole modes the dipolar stabilizer rods (DSR's) are used. The design of the DSR's is done using the computer code CST Microwave studio. The variation of the quadrupole and dipolar mode frequencies with the radius and length of the DSR's are studied. (author)

  11. The Cosmic Microwave Background

    Directory of Open Access Journals (Sweden)

    Jones Aled

    1998-01-01

    Full Text Available We present a brief review of current theory and observations of the cosmic microwave background (CMB. New predictions for cosmological defect theories and an overview of the inflationary theory are discussed. Recent results from various observations of the anisotropies of the microwave background are described and a summary of the proposed experiments is presented. A new analysis technique based on Bayesian statistics that can be used to reconstruct the underlying sky fluctuations is summarised. Current CMB data is used to set some preliminary constraints on the values of fundamental cosmological parameters $Omega$ and $H_circ$ using the maximum likelihood technique. In addition, secondary anisotropies due to the Sunyaev-Zel'dovich effect are described.

  12. Microwave superheaters for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, R.B.; Hoffman, M.A.; Logan, B.G.

    1987-10-16

    The microwave superheater uses the synchrotron radiation from a thermonuclear plasma to heat gas seeded with an alkali metal to temperatures far above the temperature of material walls. It can improve the efficiency of the Compact Fusion Advanced Rankine (CFAR) cycle described elsewhere in these proceedings. For a proof-of-principle experiment using helium, calculations show that a gas superheat ..delta..T of 2000/sup 0/K is possible when the wall temperature is maintained at 1000/sup 0/K. The concept can be scaled to reactor grade systems. Because of the need for synchrotron radiation, the microwave superheater is best suited for use with plasmas burning an advanced fuel such as D-/sup 3/He. 5 refs.

  13. Microwave multicomponent synthesis.

    Science.gov (United States)

    Hügel, Helmut M

    2009-12-01

    In the manner that very important research is often performed by multidisciplinary research teams, the applications of multicomponent reactions involving the combination of multiple starting materials with different functional groups leading to the higher efficiency and environmentally friendly construction of multifunctional/complex target molecules is growing in importance. This review will explore the advances and advantages in microwave multicomponent synthesis (MMS) that have been achieved over the last five years.

  14. Microwave Multicomponent Synthesis

    Directory of Open Access Journals (Sweden)

    Helmut M. Hügel

    2009-12-01

    Full Text Available In the manner that very important research is often performed by multidisciplinary research teams, the applications of multicomponent reactions involving the combination of multiple starting materials with different functional groups leading to the higher efficiency and environmentally friendly construction of multifunctional/complex target molecules is growing in importance. This review will explore the advances and advantages in microwave multicomponent synthesis (MMS that have been achieved over the last five years.

  15. Microwave Multicomponent Synthesis

    OpenAIRE

    Helmut M. Hügel

    2009-01-01

    In the manner that very important research is often performed by multidisciplinary research teams, the applications of multicomponent reactions involving the combination of multiple starting materials with different functional groups leading to the higher efficiency and environmentally friendly construction of multifunctional/complex target molecules is growing in importance. This review will explore the advances and advantages in microwave multicomponent synthesis (MMS) that have been achiev...

  16. Introduction to Microwave Linear [Accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Whittum, David H

    1999-01-04

    The elements of microwave linear accelerators are introduced starting with the principles of acceleration and accelerating structures. Considerations for microwave structure modeling and design are developed from an elementary point of view. Basic elements of microwave electronics are described for application to the accelerator circuit and instrumentation. Concepts of beam physics are explored together with examples of common beamline instruments. Charged particle optics and lattice diagnostics are introduced. Considerations for fixed-target and colliding-beam experimentation are summarized.

  17. Microwave-Assisted Olefin Metathesis

    Science.gov (United States)

    Nicks, François; Borguet, Yannick; Sauvage, Xavier; Bicchielli, Dario; Delfosse, Sébastien; Delaude, Lionel; Demonceau, Albert

    Since the first reports on the use of microwave irradiation to accelerate organic chemical transformations, a plethora of papers have been published in this field. In most examples, microwave heating has been shown to dramatically reduce reaction times, increase product yields, and enhance product purity by reducing unwanted side reactions compared to conventional heating methods. The present contribution aims at illustrating the advantages of this technology in olefin metathesis and, when data are available, at comparing microwave-heated and conventionally heated experiments

  18. Microwave-assisted ADMET polymerization

    OpenAIRE

    Rojas Jiménez, Giovanni

    2015-01-01

    Microwave-assisted ADMET polymerization is reported on a series of α,ω-diene monomers, both polar and non-polar. Investigations indicate that of the multiple microwave modes possible, constant power is the most advantageous, providing polymers up to M‾w=31,000g/mol. Molecular weight values are nearly triple in comparison with conventional oil bath heating. Polymers are characterized by NMR, GPC, TGA, and DSC. Microwave irradiation provides a highly controllable and energy efficient ADMET poly...

  19. mRNA Processing Factor CstF-50 and Ubiquitin Escort Factor p97 Are BRCA1/BARD1 Cofactors Involved in Chromatin Remodeling during the DNA Damage Response.

    Science.gov (United States)

    Fonseca, Danae; Baquero, Jorge; Murphy, Michael R; Aruggoda, Gamage; Varriano, Sophia; Sapienza, Carmen; Mashadova, Oksana; Rahman, Shadaqur; Kleiman, Frida E

    2018-02-15

    The cellular response to DNA damage is an intricate mechanism that involves the interplay among several pathways. In this study, we provide evidence of the roles of the polyadenylation factor cleavage stimulation factor 50 (CstF-50) and the ubiquitin (Ub) escort factor p97 as cofactors of BRCA1/BARD1 E3 Ub ligase, facilitating chromatin remodeling during the DNA damage response (DDR). CstF-50 and p97 formed complexes with BRCA1/BARD1, Ub, and some BRCA1/BARD1 substrates, such as RNA polymerase (RNAP) II and histones. Furthermore, CstF-50 and p97 had an additive effect on the activation of the ubiquitination of these BRCA1/BARD1 substrates during DDR. Importantly, as a result of these functional interactions, BRCA1/BARD1/CstF-50/p97 had a specific effect on the chromatin structure of genes that were differentially expressed. This study provides new insights into the roles of RNA processing, BRCA1/BARD1, the Ub pathway, and chromatin structure during DDR. Copyright © 2018 Fonseca et al.

  20. TauCstF-64 Mediates Correct mRNA Polyadenylation and Splicing of Activator and Repressor Isoforms of the Cyclic AMP-Responsive Element Modulator (CREM) in Mouse Testis.

    Science.gov (United States)

    Grozdanov, Petar N; Amatullah, Atia; Graber, Joel H; MacDonald, Clinton C

    2016-02-01

    Spermatogenesis is coordinated by the spatial and temporal expression of many transcriptional and posttranscriptional factors. The cyclic AMP-responsive element modulator (CREM) gene encodes both activator and repressor isoforms that act as transcription factors to regulate spermiogenesis. We found that the testis-expressed paralog of CstF-64, tauCstF-64 (gene symbol Cstf2t), is involved in a polyadenylation site choice switch of Crem mRNA and leads to an overall decrease of the Crem mRNAs that are generated from internal promoters in Cstf2t(-/-) mice. More surprisingly, loss of tauCstF-64 also leads to alternative splicing of Crem exon 4, which contains an important activation domain. Thus, testis-specific CREMtau2 isoform protein levels are reduced in Cstf2t(-/-) mice. Consequently, expression of 15 CREM-regulated genes is decreased in testes of Cstf2t(-/-) mice at 25 days postpartum. These effects might further contribute to the infertility phenotype of these animals. This demonstrates that tauCstF-64 is an important stage-specific regulator of Crem mRNA processing that modulates the spatial and temporal expression of downstream stage-specific genes necessary for the proper development of sperm in mice. © 2016 by the Society for the Study of Reproduction, Inc.

  1. Exploring Science in the Studio: NSF-Funded Initiatives to Increase Scientific Literacy in Undergraduate Art and Design Students

    Science.gov (United States)

    Metzger, C. A.

    2015-12-01

    The project Exploring Science in the Studio at California College of the Arts (CCA), one of the oldest and most influential art and design schools in the country, pursues ways to enable undergraduate students to become scientifically literate problem-solvers in a variety of careers and to give content and context to their creative practices. The two main branches of this National Science Foundation-funded project are a series of courses called Science in the Studio (SitS) and the design of the Mobile Units for Science Exploration (MUSE) system, which allow instructors to bring science equipment directly into the studios. Ongoing since 2010, each fall semester a series of interdisciplinary SitS courses are offered in the college's principal areas of study (architecture, design, fine arts, humanities and sciences, and diversity studies) thematically linked by Earth and environmental science topics such as water, waste, and sustainability. Each course receives funding to embed guest scientists from other colleges and universities, industry, or agriculture directly into the studio courses. These scientists worked in tandem with the studio faculty and gave lectures, led field trips, conducted studio visits, and advised the students' creative endeavors, culminating in an annual SitS exhibition of student work. The MUSE system, of fillable carts and a storage and display unit, was designed by undergraduate students in a Furniture studio who explored, experimented, and researched various ways science materials and equipment are stored, collected, and displayed, for use in the current and future science and studio curricula at CCA. Sustainable practices and "smart design" underpinned all of the work completed in the studio. The materials selected for the new Science Collection at CCA include environmental monitoring equipment and test kits, a weather station, a stream table, a rock and fossil collection, and a vertebrate skull collection. The SitS courses and MUSE system

  2. Objective quantification of mode competition in THz BWO optimization

    Science.gov (United States)

    Bao, Rong; Wang, Hongguang; Zhang, Ruxia; Li, Yongdong; Liu, Chunliang

    2017-11-01

    The corrugated rectangular waveguide slow-wave structure (CRWSWS) terahertz (THz) backward wave oscillator (BWO) is suitable for many applications because of its compactness and portability. An analytical model is proposed for calculating the cold and hot parameters of a CRWSWS THz BWO. Two forms of mode competition are quantified using the analytical model. The quantifications are used as objectives when optimizing the CRWSWS THz BWO. The optimization is performed based on the analytical model and a local search algorithm. The optimization results are verified using CST Microwave Studio and Particle Studio. The influence of one of the quantifications on the convergence of the optimization algorithm is also investigated.

  3. Integration of Structural Knowledge in Design Studio Project: Assessment Study of Curriculum In Architecture Course in University Of Malaya

    Directory of Open Access Journals (Sweden)

    Aniza Abdul Aziz

    2010-12-01

    Full Text Available Architectural education should advance in parallel with the industrial growth of building technology. Universities as producers of future architects have yet to develop curriculums for building technology to suit the growth of the building industry. This gap between education and industrial growth has been a topic of debate for many researchers who are concerned about architectural pedagogy. Architectural instruction further aggravated the problem whereby in most architectural schools worldwide, teaching is divided between the design studio, where the design projects are taught and lecture classes where the technical parts are taught. The latter should be integrated with design studio to enhance design levels. Students face difficulty integrating and applying the structural knowledge gained from structure classes into their design. One explanation for this deficiency is because the current architectural structure subject's content is borrowed from an engineering syllabus. This study will examine the course content, instruction styles and method of teaching structure subjects and will investigate the learning outcomes of design studio through students' performance and perception in integrating structural knowledge in their design projects. Respondents were students from Year 1 to Year 5 doing their Bachelor of Science in Architecture and Bachelor of Architecture degrees in University of Malaya. Semi-structured interviews were conducted with the design studio coordinators and structure lecturers. This study aims to find the ideal course content/method of teaching to facilitate more integration between structure and design studio.

  4. The European Microwave Week 2008 and its Microwave Conferences

    NARCIS (Netherlands)

    Hoogeboom, P.; Van Vliet, F.

    2009-01-01

    Under the auspices of the European Microwave Association (EuMA) the 11th annual European Microwave Week was organized in the Amsterdam RAI Congress Centre, The Netherlands, 27-31 October 2008. This major event consisted this year of five conferences, an exhibition, and various side events. The 38th

  5. Improving Student Commitment to Healthcare-Related Design Practice by Improving the Studio Learning Experience.

    Science.gov (United States)

    Tan, Lindsay; Hong, Miyoung; Albert, Taneshia West

    2017-10-01

    This case study explores the influence of the healthcare design studio experience on students' short-term professional goals as measured through rates of healthcare-related certification and internship/employment. The value and relevance of interior design is evident in the healthcare design sector. However, interior design students may not perceive this value if it is not communicated through their design education. Students' experience in the design studio plays a crucial role in determining career choices, and students may be more committed to career goals when there is clear connection between major coursework and professional practice. The authors compared healthcare-related certification and internship/employment levels between two student cohorts in a capstone undergraduate interior design healthcare design studio course. The first cohort was led by the existing curriculum. The second cohort was led by the revised curriculum that specifically aimed at encouraging students to commit to healthcare-related design practice. When measured at 3 months from graduation, the second cohort, led by the revised curriculum, saw a 30% increase in Evidence-based Design Accreditation and Certification exam pass rates and a 40% increase in healthcare-related internship/employment. The challenge of interior design education is to instill in emerging professionals not only professional competence but also those professional attitudes that will make them better prepared to design spaces that improve quality of life, particularly in healthcare environments. The results exceeded the project goals, and so this could be considered a promising practice for courses focused on healthcare design education.

  6. A Brief Analysis on The Mannerism of Strange Stories of A Chinese Studio by Pu Songling

    Directory of Open Access Journals (Sweden)

    Andyni Khosasih

    2012-10-01

    Full Text Available Strange Stories of a Chinese Studio, commonly known as 聊斋 (Liaozhai is a short novel written in classical Chinese from Qing dynasty. This novel was written in 1680, year 19 of Emperor Kangxi’s reign. The novel has 491 chapters. Article explored Pu Songling’s mannerism, such as the contents, material collection, innovation of artistic literary elements and images of women. It can be concluded that  the novel reflects the broadness of humanistic world and thoroughly describes images of women. It broke through the restriction of thoughts in feudalism society.  

  7. MOOC - Massive Open Online Course Instalação do Android Studio

    OpenAIRE

    Moreira, Bernardo; Reguinga, Bernardo; Samartinho, João

    2017-01-01

    As tecnologias estão cada vez mais presentes no dia a dia. É crucial que os professores e alunos se sintam preparados para este novo universo tecnológico, onde as tecnologias assumem um papel preponderante no processo de ensino-aprendizagem. Este poster apresenta um projeto em que a partir de um MOOC (Massive Open Online Couse) disponibilizamos um módulo de instalação do Android Studio na plataforma eRaízes. A adesão a esta modalidade de aprendizagem (MOOC) e a crescente utilização do Andr...

  8. Plan Estratégico de Marketing aplicado a la Empresa Studio Morena Nail&Spa

    OpenAIRE

    Delgado Gomezcoello, Carlos Javier

    2013-01-01

    El presente trabajo de investigación tiene como objetivo la elaboración de Plan estratégico de marketing aplicado a la empresa Studio Morena Nail & Spa, en cuyo contenido se delinearan en forma pragmática, coherente y objetiva, conceptos de pensamiento estratégico, análisis del entorno, variables mercadológicas y herramientas administrativas que coadyuven a la diferenciación con otras empresas que presten servicios similares en el mercado. Magister en Administración de Empresas

  9. The Global Studio - Incorporating Peer-Learning into the Design Curriculum

    OpenAIRE

    Aysar Ghassan; Erik Bohemia

    2015-01-01

    In ‘tutor-led’ design education, lecturers reside at the centre of teaching & learning activi­ties. We argue that tutor-led design education does not prepare graduates sufficiently for working in highly complex professional capacities. We outline an alternative learning envi­­ron­ment named the Global Studio in which lecturers are more ‘distant’ in pedagogical activities. This ‘distance’ opens up learning spaces which expose students to complex project situations in preparation for profes...

  10. Creating a brand identity for a new mattress brand : Case: Napsie by Studio Moderna

    OpenAIRE

    Lazareva, Svetlana

    2016-01-01

    The aim of this thesis was to study the concept of brand identity and its elements in order to outline a basic brand identity for the case brand. The study was conducted for the case company Studio Moderna and the case brand Napsie. The aim of the research was to study the concepts of brand, branding and brand identity. Furthermore, the research aimed at examining managerial tools and techniques that are used in brand identity creation process. Another aim of the research was to discover how ...

  11. Microwave and Pulsed Power

    Energy Technology Data Exchange (ETDEWEB)

    Freytag, E.K.

    1993-03-01

    The goals of the Microwave and Pulsed Power thrust area are to identify realizable research and development efforts and to conduct high-quality research in those pulse power and microwave technologies that support existing and emerging programmatic requirements at Lawrence Livermore National Laboratory (LLNL). Our main objective is to work on nationally important problems while enhancing our basic understanding of enabling technologies such as component design and testing, compact systems packaging, exploratory physics experiments, and advanced systems integration and performance. During FY-92, we concentrated our research efforts on the six project areas described in this report. (1) We are investigating the superior electronic and thermal properties of diamond that may make it an ideal material for a high-power, solid-state switch. (2) We are studying the feasibility of using advanced Ground Penetrating Imaging Radar technology for reliable non-destructive evaluation of bridges and other high-value concrete structures. These studies include conceptual designs, modeling, experimental verifications, and image reconstruction of simulated radar data. (3) We are exploring the efficiency of pulsed plasma processing techniques used for the removal of NO{sub x} from various effluent sources. (4) We have finished the investigation of the properties of a magnetically delayed low-pressure gas switch, which was designed here at LLNL. (5) We are applying statistical electromagnetic theory techniques to help assess microwave effects on electronic subsystems, by using a mode stirred chamber as our measurement tool. (6) We are investigating the generation of perfluoroisobutylene (PFIB) in proposed CFC replacement fluids when they are subjected to high electrical stresses and breakdown environments.

  12. Advances on integrated microwave photonics

    DEFF Research Database (Denmark)

    Dong, Jianji; Liao, Shasha; Yan, Siqi

    2017-01-01

    Integrated microwave photonics has attracted a lot of attentions and makes significant improvement in last 10 years. We have proposed and demonstrated several schemes about microwave photonics including waveform generation, signal processing and energy-efficient micro-heaters. Our schemes are all...

  13. Microstrip microwave band gap structures

    Indian Academy of Sciences (India)

    Microwave band gap structures exhibit certain stop band characteristics based on the periodicity, impedance contrast and effective refractive index contrast. These structures though formed in one-, two- and three-dimensional periodicity, are huge in size. In this paper, microstrip-based microwave band gap structures are ...

  14. Microwave Sterilization in School Microbiology.

    Science.gov (United States)

    Wynn, Brian; Dixon, Angela

    1988-01-01

    Described are two investigations carried out in a high school biology department using a domestic microwave oven to compare the relative attributes of the autoclave and microwave oven in school use. Discussed are equipment, methods, and results of each investigation. (Author/CW)

  15. Microwave Radiometry in Remote Sensing

    DEFF Research Database (Denmark)

    Gudmandsen, Preben

    1982-01-01

    Microwave radiometry has shown its capabilities of observing and monitoring large-scale geophysical observables from space. Examples are sea surface temperature and surface wind over the ocean, sea ice extent, concentration and category and snow cover extent and water content. At low microwave fr...

  16. Resonant freak microwaves

    International Nuclear Information System (INIS)

    Aguiar, F.M. de

    2011-01-01

    The Helmholtz equation describing transverse magnetic modes in a closed flat microwave resonator with 60 randomly distributed discs is numerically solved. At lower frequencies, the calculated wave intensity spatially distributed obeys the universal Porter-Thomas form if localized modes are excluded. A superposition of resonant modes is shown to lead to rare events of extreme intensities (freak waves) at localized 'hot spots'. The temporally distributed intensity of such a superposition at the center of a hot spot also follows the Porter-Thomas form. Branched modes are found at higher frequencies. The results bear resemblance to recent experiments reported in an open cavity.

  17. DSN Microwave Antenna Holography

    Science.gov (United States)

    Rochblatt, D. J.; Seidel, B. L.

    1984-01-01

    The DSN microwave antenna holography project will obtain three-dimensional pictures of the large DSN antenna surfaces. These pictures must be of suffi icient resolution to allow adjustment of the reflector panels to an rms surface of 0.5 mm (0.25 mm, goal). The major parameters and equations needed to define a holographic measurement system are outlined and then the proof of concept demonstration measurement that was made at DSS-43 (Australia) that resulted in contour maps with spatial resolution of 7 m in the aperture plane and resolution orthogonal to the aperture plane of 0.7 mm was discussed.

  18. Passive Microwave Components and Antennas

    DEFF Research Database (Denmark)

    State-of-the-art microwave systems always require higher performance and lower cost microwave components. Constantly growing demands and performance requirements of industrial and scientific applications often make employing traditionally designed components impractical. For that reason, the design...... and development process remains a great challenge today. This problem motivated intensive research efforts in microwave design and technology, which is responsible for a great number of recently appeared alternative approaches to analysis and design of microwave components and antennas. This book highlights...... techniques. Modelling and computations in electromagnetics is a quite fast-growing research area. The recent interest in this field is caused by the increased demand for designing complex microwave components, modeling electromagnetic materials, and rapid increase in computational power for calculation...

  19. Carnegie Mellon's STUDIO for Creative Inquiry [and] The Interdisciplinary Teaching Network (ITeN) [and] Interactive Fiction [and] The Networked Virtual Art Museum.

    Science.gov (United States)

    Holden, Lynn; And Others

    1992-01-01

    Explains the STUDIO for Creative Inquiry, an interdisciplinary center at Carnegie Mellon University that supports experimental activities in the arts, and its Interdisciplinary Teaching Network. Three STUDIO projects are described: the Ancient Egypt Prototype application of the network; an interactive fiction system based on artificial…

  20. Architecture Studio Archive: A Case Study in the Comprehensive Digital Capture and Repository of Student Design Work as an Aid to Teaching, Research, and Accreditation

    Science.gov (United States)

    Anderson, Ross; Arndell, Michael; Christensen, Sten

    2009-01-01

    The "Architecture Studio Archive" pilot sought to form a comprehensive digital archive of the diverse student work conducted in the first year of the Bachelor of Design in Architecture Degree at the University of Sydney. The design studio is the primary vehicle for teaching architectural design. It is a locus for creative activity, with…

  1. "Conversation Leading to Progress": Student Perceptions of Peer Tutors' Contribution to Enhancing Creativity and Collaboration in a First Year Design Studio

    Science.gov (United States)

    Zamberlan, Lisa; Wilson, Stephanie E.

    2017-01-01

    This paper reports on an action research project involving the redesign, implementation and evaluation of a peer tutor program in a first year design studio in higher education. The effectiveness of the revised program, particularly its capacity to support learning for commencing students in the environment of a creative studio, is examined…

  2. Development of Automated Procedures to Generate Reference Building Models for ASHRAE Standard 90.1 and India’s Building Energy Code and Implementation in OpenStudio

    Energy Technology Data Exchange (ETDEWEB)

    Parker, Andrew [National Renewable Energy Lab. (NREL), Golden, CO (United States); Haves, Philip [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jegi, Subhash [International Institute of Information Technology, Hyderabad (India); Garg, Vishal [International Institute of Information Technology, Hyderabad (India); Ravache, Baptiste [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-09-14

    This paper describes a software system for automatically generating a reference (baseline) building energy model from the proposed (as-designed) building energy model. This system is built using the OpenStudio Software Development Kit (SDK) and is designed to operate on building energy models in the OpenStudio file format.

  3. We are Groot ! Marvel Studios, productions Disney et nouvelles identités du super-héros

    OpenAIRE

    Tomasovic, Dick

    2017-01-01

    Analyse de l'évolution du Marvel Cinematic Universe et particulièrement de la manière dont les tensions entre Marvel et Disney peuvent apparaître dans ces productions. Comme chacun le sait, les studios Marvel enchainent les succès depuis qu’ils sont devenus une filiale de la Walt Disney Company en 2009. Cependant, à bien regarder les films produits par le studio depuis le passage de la maison de production sous Disney, il est possible de lire une autre histoire de la relation entre la filial...

  4. The Microsoft Visual Studio Software Development For 5 DOF Nuclear Malaysia Robot Arm V2 Control System

    International Nuclear Information System (INIS)

    Mohd Zaid Hassan; Anwar Abdul Rahman; Azraf Azman; Mohd Rizal Mamat; Mohd Arif Hamzah

    2014-01-01

    This paper presents the Microsoft visual studio development for 5DOF Nuclear Malaysia Robot Arm V2 control system. The kinematics analysis is the study of the relationship between the individual joints of robot manipulator, the position and orientation of the end-effector. The Denavit-Hartenberg (DH) model is used to model the robot links and joints. Both forward and inverse kinematic are presented. The simulation software has been developed by using Microsoft visual studio to solve the robot arms kinematic behavior. (author)

  5. The integration of studio cycling into a worksite stress management programme.

    Science.gov (United States)

    Clark, Matthew M; Soyring, Jason E; Jenkins, Sarah M; Daniels, Denise C; Berkland, Bridget E; Werneburg, Brooke L; Hagen, Philip T; Lopez-Jimenez, Francisco; Warren, Beth A; Olsen, Kerry D

    2014-04-01

    High stress is a prevalent problem in the worksite. To reduce stress, improve productivity, reduce absenteeism, and lower healthcare costs, many companies offer exercise classes or stress management programmes. Although physical activity is an important component of stress management, few worksites have integrated physical activity into their comprehensive stress reduction programmes. The purpose of this single-arm pilot project was to examine the potential effectiveness of an integrated exercise (studio cycling) and cognitive-behavioural stress management programme. Eighty-four adults, 75% female, mostly aged 40+ years, participated in an integrated 12-week cycling studio and cognitive-behavioural stress management programme. Participants experienced a significant and clinically meaningful reduction on the Perceived Stress Scale (p manage stress at the programme's end and at a 1-month follow-up. Participants also reported having significantly improved overall health, improved nutritional habits, higher physical activity level, greater confidence in their ability to follow a healthy diet, higher spiritual well-being, improved sleep, receiving more support for maintaining healthy living and improved quality of life at the completion of the 12-week programme and 1-month follow-up. These findings provide further support for an integrated exercise and stress management programme. © 2013 John Wiley & Sons, Ltd.

  6. Animación y música en los videoclips del Studio Ghibli

    Directory of Open Access Journals (Sweden)

    Francisco-Javier LÓPEZ-RODRÍGUEZ

    2017-07-01

    Full Text Available Este artículo analiza los videoclips animados creados por el Studio Ghibli, un reconocido estudio de animación japonés. El objetivo principal de este análisis es doble: por un lado se pretende establecer qué técnicas de animación se utilizan y cómo se relaciona la música con la imagen animada. Por el otro, se examina la presencia de rasgos autoriales e intertextuales en los videoclips para determinar si estos videos cumplen una auténtica función promocional o usan la música como mero acompañamiento. El análisis llevado a cabo se basa en una metodología de análisis cualitativo del discurso audiovisual que comprende diversos aspectos tales como la organización estructural, la relación entre música e imagen, los personajes, los espacios, el apartado formal, el apartado sonoro y la presencia de elementos intertextuales. La muestra se compone de seis videoclips animados creados por Studio Ghibli. Los resultados de los análisis permiten concluir que en estos videos se aprecia un estilo diferenciado al de los largometrajes del estudio y que la dimensión promocional propia del formato predomina sobre las pretensiones artísticas o la excelencia formal.

  7. La misurazione dei processi di regolazione cognitiva e metacognitiva durante lo studio con gli ipermedia

    Directory of Open Access Journals (Sweden)

    Roger Azevedo

    2010-01-01

    Full Text Available L’apprendimento autoregolato rappresenta una modalità di apprendimento di fondamentale importanza quando ci si avvale del supporto di ambienti ipermediali. Obiettivo di questo articolo è presentare quattro assunzioni chiave che consentono la misurazione dei processi cognitivi e metacognitivi attivati durante l’apprendimento tramite ipermedia. Innanzi tutto, assumiamo che sia possibile individuare, tracciare, modellare e favorire processi di apprendimento auto-regolato durante lo studio con gli ipermedia. La seconda assunzione si focalizza sul comprendere come la complessità dei processi regolatori che avvengono durante l’apprendimento mediato da sistemi ipermediali sia importante per determinare il perché alcuni processi vengono messi in atto durante l’esecuzione di un compito. Le terza assunzione è relativa al considerare che l’utilizzo di processi di apprendimento auto-regolato possa dinamicamente cambiare nel tempo e che tali processi sono di natura ciclica (influenzati dalle condizioni interne ed esterne e da meccanismi di feedback. Infine, l’identificazione, raccolta e classificazione dei processi di apprendimento autoregolato utilizzati durante lo studio con sistemi ipermediali, può risultare un compito alquanto difficoltoso.

  8. The Apprehension and views of the students of music education department about studio recording performance

    Directory of Open Access Journals (Sweden)

    Alaattin CANBAY

    2015-07-01

    Full Text Available Being individually staged of music has been a performance process that always requires intensive concentration, attention and long - running work for performers. At the end of this process, generally during their performance, musicians feel apprehensive and excited about some reasons like carrying out work's musical and technical factors properly and sense of being appreciated by audiences. In many surveys, it is known that ,in concerts and their own instrument exams, the apprehension of undergraduate student s of music education department ,who have experienced this process, affects their performances negatively. Thus, the aim of this study is to specify the music education undergraduate students' apprehension level before a studio recording that needs a very special performance according to different variables. Also in this study, students' views about their studio recording experiences are taken. In the study, descriptive research is used and the technical qualitative research is imposed. In the study carried out for two months, working party is designated by the students of Çomu - Faculty of Education, Department of Fine arts education, Department of music education.

  9. The Global Studio - Incorporating Peer-Learning into the Design Curriculum

    Directory of Open Access Journals (Sweden)

    Aysar Ghassan

    2015-07-01

    Full Text Available In ‘tutor-led’ design education, lecturers reside at the centre of teaching & learning activi­ties. We argue that tutor-led design education does not prepare graduates sufficiently for working in highly complex professional capacities. We outline an alternative learning envi­­ron­ment named the Global Studio in which lecturers are more ‘distant’ in pedagogical activities. This ‘distance’ opens up learning spaces which expose students to complex project situations in preparation for professional working life. Global Studio projects are ‘student-led’ and contain explicit opportunities for peer tutoring to ensue. Feedback indicates that learners benefitted from engaging in peer tutoring. However, many students struggled with making important decisions when operating outside of the tutor-led learning environment. To maximise their benefit, we argue that student-led projects featuring peer-tutoring should be scaffolded throughout design programmes to provide students with a sufficient level of expo­sure to this mode of learning. Image by artist Malcom Jones. http://www.malcomjones.com/index.htm

  10. Lights, Camera, Action ... and Cooling - The case for centralized low carbon energy at Fox Studios

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Alastair [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Regnier, Cindy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-10-01

    Fox Studios partnered with the U.S. Department of Energy (DOE) to develop and implement solutions to retrofit two production stages and one of its central cooling plants, to reduce energy consumption by at least 30% as part of DOE’s Commercial Building Partnerships (CBP) Program. Although this case study reports expected savings arising from proposed design recommendations for a unique building type and the unusual load characteristics associated with its use, the EEMs implemented for the central plant are applicable to any large campus, office and higher education facility. The intent is that by making the energy-efficiency measures (EEMs) set that were assessed as cost-effective from this project applicable to a larger number of buildings on the campus Fox Studios will be able to implement an integrated campus-wide energy strategy for the long term. The significant challenges for this project in the design phase included identifying how to assess and analyze multiple system types, develop a coherent strategy for assessment and analysis, implement the measurement and verification activities to collect the appropriate data (in terms of capturing ‘normal’ operating characteristics and granularity) and determine the best approach to providing cooling to the site buildings based on the nature of existing systems and the expected improvement in energy performance of the central cooling plant. The analytical framework adopted provides a blueprint for similar projects at other large commercial building campuses.

  11. 21 CFR 1030.10 - Microwave ovens.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Microwave ovens. 1030.10 Section 1030.10 Food and... HEALTH PERFORMANCE STANDARDS FOR MICROWAVE AND RADIO FREQUENCY EMITTING PRODUCTS § 1030.10 Microwave ovens. (a) Applicability. The provisions of this standard are applicable to microwave ovens manufactured...

  12. ANIMAtion Studio

    OpenAIRE

    Fraidoon, Noora

    2014-01-01

    Form, space, rhythm, order, symmetry, balance, repetition, proportion and scale are few from a long checklist of principles that, if followed carefully by the designer, will result in "beautiful" architecture, or so I was told. However, what exactly is "beautiful"? In his book "The beautiful necessity" (1910, p.34) Claude Fayette Bragdon suggests that "Beauty is the name we give to truth we cannot understand". This statement implies that there is a hidden quality within each building, or ev...

  13. The Liverpool Microwave Palaeointensity System

    Science.gov (United States)

    Hill, Mimi; Biggin, Andrew; Hawkins, Louise; Hodgson, Emma; Hurst, Elliot

    2016-04-01

    The motivation for the group at Liverpool in the 1990s (led by John Shaw and Derek Walton) to start experimenting with using microwaves to demagnetise and remagnetise palaeomagnetic samples, rather than heating using conventional ovens, was to reduce laboratory induced alteration in absolute palaeointensity experiments. As with other methods, the non-ideal effects of grain size and naturally altered remanence must still be addressed. From humble beginnings using a domestic microwave oven the current 4th generation microwave system (MWS) has developed in to an integrated combined 14 GHz microwave resonant cavity and SQUID magnetometer system. The MWS is designed to investigate one 5 mm diameter sample at a time with microwave exposure (the equivalent of a heating step in conventional experiments) ranging from a few seconds up to around a minute. Each experiment (protocol, checks, direction and strength of applied field, number of steps etc) can be tailored to the behaviour of each individual sample. There have been many published studies demonstrating the equivalence of conventional thermal (Thellier) and microwave techniques using both artificial and natural remanence and also that the microwave method can indeed reduce laboratory induced alteration. Here an overview of the present MWS including a discussion of the physical processes occurring will be given. Examples of current projects (both archaeological and geological) utilising the method will also be described. Finally, future developments and applications of the method will be discussed.

  14. Alteration of the miRNA expression profile in male porcine anterior pituitary cells in response to GHRH and CST and analysis of the potential roles for miRNAs in regulating GH.

    Science.gov (United States)

    Qi, Qi-En; Xi, Qian-Yun; Ye, Rui-Song; Chen, Ting; Cheng, Xiao; Li, Chao-Yun; Zhu, Xiao-Tong; Shu, Gang; Wang, Li-Na; Jiang, Qing-Yan; Zhang, Yong-Liang

    2015-04-01

    Growth hormone releasing hormone (GHRH) is a major positive regulator of growth hormone (GH) in the anterior pituitary gland, while cortistatin's (CST) role is negative. miRNAs (microRNAs or miRs) are small RNA molecules modulating gene expression at the post-transcriptional level. However, little is known about the function of miRNAs in the regulation of GH synthesis and/or secretion. This study investigated potential functional miRNAs involved in GH secretion in the normal porcine pituitary. Primary porcine anterior pituitary cells were cultivated and then treated with 10 nmol/L GHRH and 100 nmol/L CST, respectively. The effects of GHRH and CST on GH secretion were determined using RIA. miRNA microarrays were employed to analyze miRNA expression after treatment and then differentially expressed miRNAs were screened. Bioinformatics analysis was used to analyze the potential targets in growth hormone regulation of altered miRNAs. Furthermore, functional experiments were conducted to study the function of ssc-let-7c. GHRH significantly promoted GH secretion, while CST suppressed GH secretion. 19 and 35 differentially expressed miRNAs were identified in response to GHRH and CST treatments respectively. Verification of 5 randomly selected miRNAs by quantitative real-time PCR (qRT-PCR) showed similar changes with microarray analysis. Target analysis showed that some miRNAs may be involved in GH secretion-related pathways. Importantly, ssc-let-7c was predicted to target GH1 and GHRHR mRNA 3'untranslated regions (3'UTRs), which was supported by luciferase reporter assay. Furthermore, functional experimental results showed that ssc-let-7c was involved in GH secretion regulation, and overexpression of ssc-let-7c inhibited GH secretion in porcine anterior pituitary cells. GHRH and CST modulated porcine pituitary cell miRNA expression. Bioinformatics analysis revealed a complicated network among differentially expressed miRNAs, GH regulation-related genes and hormones. More

  15. Changes in intraocular pressure values measured with noncontact tonometer (NCT), ocular response analyzer (ORA) and corvis scheimpflug technology tonometer (CST) in the early phase after small incision lenticule extraction (SMILE).

    Science.gov (United States)

    Shen, Yang; Su, Xiangjian; Liu, Xiu; Miao, Huamao; Fang, Xuejun; Zhou, Xingtao

    2016-11-18

    Corneal biomechanical properties are always compromised after corneal refractive surgeries thus leading to underestimated intraocular pressure (IOP) that complicates the management of IOP. We investigated the changes in postoperative baseline of IOP values measured with noncontact tonometer (NCT), ocular response analyzer (ORA) and corvis scheimpflug technology (CST) in the early phase after small incision lenticule extraction (SMILE). Twenty-two eyes (-6.76 ± 1.39D) of 22 moderate and high myopes, (28.36 ± 7.14 years, 12 male and 10 female) were involved in this prospective study. IOP values were measured using a non-contact tomometer (NCT-IOP), an ocular response analyzer (corneal-compensated IOP, IOPcc and Goldmann-correlated IOP, IOPg) and a Corvis scheimpflug technology tonometer (CST-IOP) preoperatively, at 20 min and 24 h, postoperatively. Repeated measures analysis of variance (RM-ANOVA), Pearson's correlation analysis and multiple linear regression models (stepwise) were performed. Cut-off P values were 0.05. Except for IOPcc, NCT-IOP, IOPg, and CST-IOP values significantly decreased after SMILE procedure (All P values 0.05). Multiple linear regression models (stepwise) showed that the practical post-operative IOP value was the main predictor of the theoretical post-operative NCT-IOP, IOPcc and IOPg values (all P values <0.001). The postoperative applanation time 1 (AT1) value (B = 8.079, t = 4.866, P < 0.001), preoperative central corneal thickness (CCT) value (B = 0.035, t = 2.732, P = 0.014) and postoperative peak distance (PD) value (B = 0.515, t = 2.176, P = 0.043) were the main predictors of the theoretical post-operative CST-IOP value. IOP values are underestimated when assessed after SMILE by using NCT-IOP, IOPg and CST-IOP. The practical postoperative IOPcc value and theoretical post-operative CST-IOP value may be more preferable for IOP assessment in the early phase after SMILE. Current Controlled

  16. Microwave mixer technology and applications

    CERN Document Server

    Henderson, Bert

    2013-01-01

    Although microwave mixers play a critical role in wireless communication and other microwave applications employing frequency conversion circuits, engineers find that most books on this subject emphasize theoretical aspects, rather than practical applications. That's about to change with the forthcoming release of Microwave Mixer Technology and Applications. Based on a review of over one thousand patents on mixers and frequency conversion, authors Bert Henderson and Edmar Camargo have written a comprehensive book for mixer designers who want solid ideas for solving their own design challenges.

  17. The microwave Tokamak experiment (MTX)

    International Nuclear Information System (INIS)

    Thomassen, K.I.; Cohen, B.I.; Hooper, E.B.; Lang, D.D.; Nevins, W.M.

    1987-01-01

    A new experimental facility is being assembled at the Lawrence Livermore National Laboratory (LLNL) for studying microwave propagation and absorption in high density plasmas. A unique feature of the facility is the free electron laser (FEL) used to generate high peak power microwaves at 250 GHz, at a repetition rate so as to produce up to 2 MW of average power for up to 30 s. Called the Microwave Tokamak Experiment (MTX), the facility will be used for studies of plasma heating, current drive, and confinement

  18. Microwave antenna holography

    Science.gov (United States)

    Rochblatt, David J.; Seidel, Boris L.

    1992-01-01

    This microwave holography technique utilizes the Fourier transform relation between the complex far field radiation pattern of an antenna and the complex aperture field distribution. Resulting aperture phase and amplitude distribution data can be used to precisely characterize various crucial performance parameters, including panel alignment, panel shaping, subreflector position, antenna aperture illumination, directivity at various frequencies, and gravity deformation effects. The methodology of data processing presented here was successfully applied to the Deep Space Network (DSN) 34-m beam waveguide antennas. The antenna performance was improved at all operating frequencies by reducing the main reflector mechanical surface rms error to 0.43 mm. At Ka-band (32 GHz), the estimated improvement is 4.1 dB, resulting in an aperture efficiency of 52 percent. The performance improvement was verified by efficiency measurements and additional holographic measurements.

  19. Study of microwave instability

    International Nuclear Information System (INIS)

    Heifets, S.; Chao, A.

    1996-12-01

    The microwave instability is usually described by linearizing Vlasov equation in the angle-action variables I, φ and assuming that the interaction of azimuthal harmonics ρ n (I) of the distribution function ρ is weak. The argument implied here is that the Hamiltonian flow smears out particles over invariant tori characterized by the action variables, and the remaining azimuthal dependence of the distribution function is small. Indeed, such an approach successfully describes bunch spectrum and the threshold of the microwave instability. However, recently there have been interesting observations of bunch centroid and bunch shape oscillations above instability threshold at LEP and the damping ring at SLAC. There are also indicates that the oscillations sometimes occur in localized region in the longitudinal coordinate instead of affecting the entire longitudinal distribution as one expects by an action-angle analysis. In this paper the authors describe an alternative approach to the problem of bunch stability using decomposition of the Fokker-Plank equation in the system of nonlinear equations for the moments of the distribution function. In particular, this approach allows them to avoid the conventional action-angle decomposition. The physical quantities they are interested in, the moments, are expressed in the Cartesian z - δ phase space. To close the infinite hierarchy of moments equations, the authors assume that higher order correlations are small. Although both the action-angle and the Cartesian languages must be equivalent before truncation, they may have different speed of convergence depending on the problem being studied. It is hoped that Cartesian expansion approach would converge faster for the cases corresponding to those observed recently above threshold. The recent experimental observations made them interested in it again. This note is a progress report of their work

  20. Microwave Thermal Propulsion

    Science.gov (United States)

    Parkin, Kevin L. G.; Lambot, Thomas

    2017-01-01

    We have conducted research in microwave thermal propulsion as part of the space exploration access technologies (SEAT) research program, a cooperative agreement (NNX09AF52A) between NASA and Carnegie Mellon University. The SEAT program commenced on the 19th of February 2009 and concluded on the 30th of September 2015. The DARPA/NASA Millimeter-wave Thermal Launch System (MTLS) project subsumed the SEAT program from May 2012 to March 2014 and one of us (Parkin) served as its principal investigator and chief engineer. The MTLS project had no final report of its own, so we have included the MTLS work in this report and incorporate its conclusions here. In the six years from 2009 until 2015 there has been significant progress in millimeter-wave thermal rocketry (a subset of microwave thermal rocketry), most of which has been made under the auspices of the SEAT and MTLS programs. This final report is intended for multiple audiences. For researchers, we present techniques that we have developed to simplify and quantify the performance of thermal rockets and their constituent technologies. For program managers, we detail the facilities that we have built and the outcomes of experiments that were conducted using them. We also include incomplete and unfruitful lines of research. For decision-makers, we introduce the millimeter-wave thermal rocket in historical context. Considering the economic significance of space launch, we present a brief but significant cost-benefit analysis, for the first time showing that there is a compelling economic case for replacing conventional rockets with millimeter-wave thermal rockets.

  1. Writing-Intensive Approaches in a Typographic Design Studio Class: Using Writing as a Tool toward More Intentional Design

    Science.gov (United States)

    Fowler, Michael

    2015-01-01

    Taking advantage of a university-wide initiative that requires all students during their course of study to take at least one of their writing intensive classes in their major, the author relates how he was spurred to formulate one of his graphic design studio classes to accommodate the writing-intensive requirement. He had been intuitively…

  2. A Comparison of the Goals of Studio Professors Conducting Critiques and Art Education Goals for Teaching Criticism.

    Science.gov (United States)

    Barrett, Terry

    1988-01-01

    Compares stated goals of studio art course professors for teaching of criticism and the goals stated in art education literature of art teacher taught criticism. States that these goals are in conflict, therefore, future art teachers are being guided by goals for criticism that are not in accord with the goals set forth in their study of art…

  3. Applied Music Studio Teachers in Higher Education: Exploring the Impact of Identification and Talent on Career Satisfaction

    Science.gov (United States)

    Parkes, Kelly A.; Daniel, Ryan; West, Tore; Gaunt, Helena

    2015-01-01

    The purpose of this study was to explore how highly trained performing musicians, currently working in higher education conservatoires or universities, understand, categorize, and reflect on their identification as a studio music teacher. Using an online survey involving participants (N = 173) across nine western countries, respondents identified…

  4. A Rediscovered Alliance: Can New Music Performance Teaching Policy Save Music Education? A New Framework for the Music Studio

    Science.gov (United States)

    Wexler, Mathias

    2012-01-01

    Music education in K-12 school programs may continue to lose ground to other subjects unless music education and performance studies are viewed as interdependent. The author argues that the reinvigoration of both music education and performance requires that the studio experience integrate a research-based pedagogy, multi-stylistic range of…

  5. Collaboration through Flickr & Skype: Can Web 2.0 Technology Substitute the Traditional Design Studio in Higher Design Education?

    Science.gov (United States)

    Fleischmann, Katja

    2014-01-01

    Technology has not only changed the work practice of designers but also how design is taught and learned. The emergence of digital technology has made computer labs a central learning space for design students. Since this change, studio-based learning in its traditional sense appears to be in decline in higher education institutions. This is in…

  6. Using a Studio-Based Pedagogy to Engage Students in the Design of Mobile-Based Media

    Science.gov (United States)

    Mathews, James M.

    2010-01-01

    The article presents a brief overview of the Neighbourhood Game Design Project, a studio-based curriculum intervention aimed at engaging students in the design of place-based mobile games and interactive stories using geo-locative technologies (for example, GPS enabled cell phones). It describes the three curricular components that defined the…

  7. Open Studio Process as a Model of Social Action: A Program for At-Risk Youth. Brief Reports

    Science.gov (United States)

    Block, Dayna; Harris, Ted; Laing, Sarah

    2005-01-01

    The Open Studio Project (OSP) is a nonprofit arts and social service organization. This report presents the OSP process as a model of social action. It describes how the model was implemented in a particular community to address a need for arts programs for at risk youth. "Art & Action," an outreach program of OSP, became a unique year round after…

  8. Develop Prototype Microwave Interferometry Diagnostic

    Energy Technology Data Exchange (ETDEWEB)

    Tringe, J. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Converse, M. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, R. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-11-15

    A prototype microwave interferometer was created at NSTec to characterize moving conductive fronts in upcoming experiments. The interferometer is capable of operation in the ~26-40 GHz band, and interrogating fronts with more than 1 W of power.

  9. Hurricane Satellite (HURSAT) Microwave (MW)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Hurricane Satellite (HURSAT) from Microwave (MW) observations of tropical cyclones worldwide data consist of raw satellite observations. The data derive from the...

  10. Scanning Microwave Induced Acoustic Tomography

    National Research Council Canada - National Science Library

    Wang, Lihong V

    2001-01-01

    .... Cancerous breast tissues are found to be 2-5 times more strongly absorbing than surrounding normal breast tissues in the microwave, which has been attributed to an increase in bound water and sodium...

  11. Tracking Code for Microwave Instability

    International Nuclear Information System (INIS)

    Heifets, S.; SLAC

    2006-01-01

    To study microwave instability the tracking code is developed. For bench marking, results are compared with Oide-Yokoya results [1] for broad-band Q = 1 impedance. Results hint to two possible mechanisms determining the threshold of instability

  12. Cosmic microwave background, where next?

    CERN Multimedia

    CERN. Geneva

    2009-01-01

    Ground-based, balloon-borne and space-based experiments will observe the Cosmic Microwave Background in greater details to address open questions about the origin and the evolution of the Universe. In particular, detailed observations the polarization pattern of the Cosmic Microwave Background radiation have the potential to directly probe physics at the GUT scale and illuminate aspects of the physics of the very early Universe.

  13. Microwave applications of soft ferrites

    CERN Document Server

    Pardavi-Horvath, M P

    2000-01-01

    Signal processing requires broadband, low-loss, low-cost microwave devices (circulators, isolators, phase shifters, absorbers). Soft ferrites (garnets, spinels, hexaferrites), applied in planar microwave devices, are reviewed from the point of view of device requirements. Magnetic properties, specific to operation in high-frequency electromagnetic fields, are discussed. Recent developments in thick film ferrite technology and device design are reviewed. Magnetic losses related to planar shape and inhomogeneous internal fields are analyzed.

  14. Graphene Josephson Junction Microwave Detector

    Science.gov (United States)

    Fong, Kin Chung; Walsh, Evan; Lee, Gil-Ho; Efetov, Dmitri; Crossno, Jesse; Ranzani, Leonardo; Ohki, Thomas; Kim, Philip; Englund, Dirk

    Modern readout schemes for superconducting qubits have predominately relied on weak microwave signal detection and discrimination. Most schemes are based on heterodyne or homodyne receiver systems and only a few have demonstrated direct detection of microwave photons. The challenges of direct detection stem from the low energy of microwave photons and existing detector efficiency. We have designed, fabricated, and measured a graphene-based Josephson junction (gJJ) microwave detector. Exploiting its low electronic thermal conductivity and specific heat, an electron temperature rise on the order of 0.1 K due to a time average of about 10 photons in the graphene thermal photodetector is readout via a Josephson junction embedded in an 8 GHz microwave cavity. We will estimate the quantum efficiency and dark count probability of the gJJ microwave single photon detectors. This document does not contain technology or technical data controlled under either the U.S. International Traffic in Arms Regulations or the U.S. Export Administration Regulations.

  15. Tunable Multiband Microwave Photonic Filters

    Directory of Open Access Journals (Sweden)

    Mable P. Fok

    2017-11-01

    Full Text Available The increasing demand for multifunctional devices, the use of cognitive wireless technology to solve the frequency resource shortage problem, as well as the capabilities and operational flexibility necessary to meet ever-changing environment result in an urgent need of multiband wireless communications. Spectral filter is an essential part of any communication systems, and in the case of multiband wireless communications, tunable multiband RF filters are required for channel selection, noise/interference removal, and RF signal processing. Unfortunately, it is difficult for RF electronics to achieve both tunable and multiband spectral filtering. Recent advancements of microwave photonics have proven itself to be a promising candidate to solve various challenges in RF electronics including spectral filtering, however, the development of multiband microwave photonic filtering still faces lots of difficulties, due to the limited scalability and tunability of existing microwave photonic schemes. In this review paper, we first discuss the challenges that were facing by multiband microwave photonic filter, then we review recent techniques that have been developed to tackle the challenge and lead to promising developments of tunable microwave photonic multiband filters. The successful design and implementation of tunable microwave photonic multiband filter facilitate the vision of dynamic multiband wireless communications and radio frequency signal processing for commercial, defense, and civilian applications.

  16. Study of federal microwave standards

    Energy Technology Data Exchange (ETDEWEB)

    David, L.

    1980-08-01

    Present and future federal regulatory processes which may impact the permissible levels of microwave radiation emitted by the SPS Microwave Power Transmission (MPTS) were studied. An historical development of US occupational and public microwave standards includes an overview of Western and East European philosophies of environmental protection and neurophysiology which have led to the current widely differing maximum permissible exposure limits to microwaves. The possible convergence of microwave standards is characterized by a lowering of Western exposure levels while Eastern countries consider standard relaxation. A trend toward stricter controls on activities perceived as harmful to public health is under way as is interest in improving the federal regulatory process. Particularly relevant to SPS is the initiation of long-term, low-level microwave exposure programs. Coupled with new developments in instrumentation and dosimetry, the results from chronic exposure program and population exposure studies could be expected within the next five to ten years. Also discussed is the increasing public concern that rf energy is yet another hazardous environmental agent.

  17. Rethinking Materiality In Pre-Tertiary Studio Art Education In Ghana

    Directory of Open Access Journals (Sweden)

    Kwame Opoku-Bonsu

    2017-12-01

    Full Text Available This paper explores the conventional artist and environment connections, and argues that, environment that produce the Senior High School student do so with peculiar material affinities and competences ripe for 21st century art. The culture of obliging student to a few institutionalised media like clay, dyes and paints in the studio based art disciplines inhibit the numerous possibilities available, and confines art education to limited aptitudes and few institutionally expected expressions in pre-tertiary art education in Ghana. Using content analysis, the paper examines the Art Curricula and WAEC examination questions for Art Students at the SHS level. It recommends that, curricula and examination item reviews, as well as the incorporation of visual and material culture into artistic processes through democratization and participations of candidates’ cultural backgrounds, will usher in an art education premised on meaning making and conception, and institutionally groomed cultural ambassadors with significant material and visual diversities and competences.

  18. Live-innspilling i studio med fokus på akustisk gitar og vokal

    OpenAIRE

    Lamborg, Kristine; Larsen, Axel Wold

    2014-01-01

    vår bacheloroppgave foreligger det en teoretisk undersøkelse, samt tre live-innspillinger med artisten Robert Bergstrøm. Vårt mål, i tillegg til å spille inn disse låtene, var å undersøke hvilke faktorer som kunne være med på å påvirke en live-innspilling i studio. Vi kom frem til at små detaljer som for eksempel valg av plekter, justering av mikrofonplassering og slitasje på stemmebåndet kan påvirke en produksjon i stor grad. Videre kom vi frem til at kondensatormikrofoner tilfører et rik...

  19. Learning in third spaces: community art studio as storefront university classroom.

    Science.gov (United States)

    Timm-Bottos, Janis; Reilly, Rosemary C

    2015-03-01

    Third spaces are in-between places where teacher-student scripts intersect, creating the potential for authentic interaction and a shift in what counts as knowledge. This paper describes a unique community-university initiative: a third space storefront classroom for postsecondary students in professional education programs, which also functions as a community art studio for the surrounding neighborhood. This approach to professional education requires an innovative combination of theory, methods, and materials as enacted by the professionals involved and performed by the students. This storefront classroom utilizes collaborative and inclusive instructional practices that promote human and community development. It facilitates the use of innovative instructional strategies including art making and participatory dialogue to create a liminal learning space that reconfigures professional education. In researching the effectiveness of this storefront classroom, we share the voices of students who have participated in this third space as part of their coursework to underscore these principles and practices.

  20. Studio di prototipo di calorimetro per neutroni per l'esperimento ALICE

    CERN Document Server

    Arnaldi, R; Cicalò, C; Cortese, P; De Falco, A; Dellacasa, G; De Marco, N; Gallio, M; Macciotta, P; Masoni, A; Musso, A; Oppedisano, C; Piccotti, A; Puddu, G; Scomparin, E; Siddi, S; Serci, E; Soave, C; Usai, G L; Vercellin, Ermanno

    1999-01-01

    ALICE e uno dei quattro esperimenti previsti ad LHC, al CERN, il cui scopo e lo studio delle osservabili che danno informazioni rilevanti sulla formazione del quark gluon plasma, che potrebbe essere prodotto in collisioni centrali Pb-Pb, di energia nel centro di massa di 5.5 A TeV.Il parametro di impatto di tali collisioni verra determinato grazie ad un insieme di calorimetri per protoni e neutroni che misureranno l'energia portata in avanti dai nucleoni non interagenti(spettatori).E' stato costruito un prototipo di calometro per neutroni, formato da piani di fibre di quarzo, posti a 45 gradi rispetto all'asse del fascio e inframmezzati da piani di materiale passivo denso(tungsteno). La luce Cerenkov prodotta nelle fibre dallo sciame sviluppato nel materiale passivo,viene raccolta da guide ottiche in aria.Verranno presentati i rilustati di un test previsto al CERN SPS per il luglio 1999.

  1. Developing a collaborative community partnership program in medical asepsis with tattoo studios.

    Science.gov (United States)

    Bechtel, G A; Garrett, C; Grover, S

    1995-10-01

    The possibility of transmission of infectious agents during tattooing has become a legitimate issue of concern for health care providers. A collaborative educational program was developed by a county health department, College of Nursing, and tattoo artists to address issues of medical asepsis with the goal of producing a mechanism for certification of tattoo studios. The group's effort was enhanced by recognizing each other's value systems and by the mutual need for a successful program. A framework for developing, implementing, and evaluating community partnerships was addressed. This program demonstrated that community health nurses can play an instrumental role in collaborating with both health care providers and personal-service workers to minimize transmission of infectious agents during cosmetic procedures.

  2. Application of Control System Studio for the NOνA Detector Control System

    International Nuclear Information System (INIS)

    Lukhanin, Gennadiy; Biery, Kurt; Foulkes, Stephen; Kowalkowski, Jim; Paterno, Marc; Rechenmacher, Ron; Frank, Martin; Hatzikoutelis, Athanasios

    2012-01-01

    In the NOνA experiment, the Detector Controls System (DCS) provides a method for controlling and monitoring important detector hardware and environmental parameters. It is essential for operating the detector and is required to have access to roughly 370,000 independent programmable channels via more than 11,600 physical devices. In this paper, we demonstrate an application of Control System Studio (CSS), developed by Oak Ridge National Laboratory, for the NOνA experiment. The application of CSS for the DCS of the NOνA experiment has been divided into three phases: (1) user requirements and concept prototype on a test-stand, (2) small scale deployment at the prototype Near Detector on the Surface, and (3) a larger scale deployment at the Far Detector. We also give an outline of the CSS integration with the NOνA online software and the alarm handling logic for the Front-End electronics.

  3. Controlled Microwave Heating Accelerates Rolling Circle Amplification.

    Science.gov (United States)

    Yoshimura, Takeo; Suzuki, Takamasa; Mineki, Shigeru; Ohuchi, Shokichi

    2015-01-01

    Rolling circle amplification (RCA) generates single-stranded DNAs or RNA, and the diverse applications of this isothermal technique range from the sensitive detection of nucleic acids to analysis of single nucleotide polymorphisms. Microwave chemistry is widely applied to increase reaction rate as well as product yield and purity. The objectives of the present research were to apply microwave heating to RCA and indicate factors that contribute to the microwave selective heating effect. The microwave reaction temperature was strictly controlled using a microwave applicator optimized for enzymatic-scale reactions. Here, we showed that microwave-assisted RCA reactions catalyzed by either of the four thermostable DNA polymerases were accelerated over 4-folds compared with conventional RCA. Furthermore, the temperatures of the individual buffer components were specifically influenced by microwave heating. We concluded that microwave heating accelerated isothermal RCA of DNA because of the differential heating mechanisms of microwaves on the temperatures of reaction components, although the overall reaction temperatures were the same.

  4. Validity and Reliability Study for Studio Work Course Time Management Scale

    Directory of Open Access Journals (Sweden)

    İnci BULUT KILIÇ

    2016-12-01

    Full Text Available The purpose of this study is to develop a data collection tool to be used in determining the time management skill levels of visual arts teacher candidates in their studio work courses. After a review of the literature, a pool of items was created and arranged upon expert recommendation and a pilot study for intelligibility of the expressions was conducted. The researcher contacted a total of 288 visual arts teacher candidates who all agreed to volunteer to take part in this research. As a result of exploratory (EFA and confirmatory (CFA factor analyses, the scale determined to have four factors and 26 items. Variance ration explained by all four factors is 47.23%. Factor loadings were valued from 0.48 to 0.80. Goodness of fit values calculated by CFA were found to be χ2/sd rate 1.94 (χ2/sd=567.17/291. The other goodness of fit values calculated by CFA were RMSEA=0.05, NNFI=0.92, CFI=0.93, IFI=0.93, and RMR=0.06. All fitness indexes obtained were found to be sufficient for model fitness, and accordingly it was decided that this structure was validated. As a result of the difference between item average scores of the 27% subgroup and super group, distinctiveness of all items were found to be significant at p<0.001 level and Cronbach’s Alpha coefficients of the factors were calculated to range from 0.73 to 0.82. Cronbach’s Alpha of the total scale was calculated as 0.83. The results indicate that the questionnaire provides opportunity to make meaningful interpretations on the time management skills of visual arts teacher candidates for studio work courses.

  5. Measured Whole-House Performance of TaC Studios Test Home

    Energy Technology Data Exchange (ETDEWEB)

    Butler, T. [Southface Energy Institute, Upper Marlboro, MD (United States); Curtis, O. [Southface Energy Institute, Upper Marlboro, MD (United States); Stephenson, R. [Southface Energy Institute, Upper Marlboro, MD (United States)

    2013-12-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta-based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA, in the mixed humid climate. This home serves as a residence and home office for the firm's owners, as well as a demonstration of their design approach to potential and current clients. Southface believes the home demonstrates current best practices for the mixed-humid climate, including a building envelope featuring advanced air sealing details and low density spray foam insulation, glazing that exceeds ENERGY STAR requirements, and a high performance heating and cooling system. Construction quality and execution was a high priority for TaC Studios and was ensured by a third party review process. Post-construction testing showed that the project met stated goals for envelope performance, an air infiltration rate of 2.15 ACH50. The homeowners wished to further validate whole house energy savings through the project's involvement with Building America and this long-term monitoring effort. As a Building America test home, this home was evaluated to detail whole house energy use, end use loads, and the efficiency and operation of the ground source heat pump and associated systems. Given that the home includes many non-typical end use loads including a home office, pool, landscape water feature, and other luxury features not accounted for in Building America modeling tools, these end uses were separately monitored to determine their impact on overall energy consumption.

  6. DESIGN WITH THE SENSES AND FOR THE SENSES: AN ALTERNATIVE TEACHING MODEL FOR DESIGN STUDIO

    Directory of Open Access Journals (Sweden)

    May al-Ibrashy

    2010-07-01

    Full Text Available In the 1990s, Juhani Pallasmaa wrote a compact, yet, eye-opening book expressing his growing concern about the architectural profession’s waning ability to reference all the senses of the body in the design process. Bit by bit, the perceptive chasm between the architect and architecture was widening both in the design process and in the cognitive experience of existing architecture. More than a decade later, these concerns have heightened as the ramifications of this design divide appear in the form of architecture whose divorced virtual quality has spilled over from the design process into built reality. The illusion of virtual reality – as achieved by 3D simulation in all its glories – has pulled the architect into a zone of false confidence where he/she feels that the design has come to life before it is built and that every corner and detail can be simulated and therefore understood. But can it be touched, smelt, tasted or heard? In fact, is even what we see on the screen anywhere close to what we see as we move bodily through its spaces? This phenomenon is addressed in a design studio run by the two authors of this paper. The purpose of the design studio, which is held in the Department of Architectural Engineering, of the Faculty of Engineering of the British University in Egypt, is to design a community centre linked to a place of worship within a residential compound currently under construction on the outskirts of Cairo. The graduating class of ten students is in the final and fourth year of a program that emphasized the engineering and project management aspects of architecture at the expense of theory and history of art and architecture. The university has no humanities or liberal arts program as yet, and students have minimal contact to arts within the university system. Contact hours in design studios are limited and design is mostly computer-aided. The need to re-emphasize the physical, tactile, polemic and holistic aspects

  7. INVESTIGATION OF THERMAL AND NON-THERMAL INTERACTIONS OF MICROWAVES WITH MATERIALS AND MICROWAVE CHEMISTRY

    Directory of Open Access Journals (Sweden)

    Soner KUŞLU

    2002-03-01

    Full Text Available The use of microwaves in industry has generated interest recently as an alternative to classic thermal heating because of the drastic reduction in the processing time. In spite of the fact that there is a wide application of microwaves, the interaction mechanism between microwaves and materials has not been well understood. Nowadays, the fact that there is a debate on the alternative use of microwaves is on not the dielectric heating which is well known but microwave specific effect. In this article there are reports which show similar kinetic in both microwave and classic thermal methods at similar temperature and simple dielectric heating of materials under microwaves conditions. There are also reports which show a clear reaction rate enhancement by microwave radiation compared to the thermal method under similar reactions conditions and temperatures indicating microwave specific effect. In addition, the study on the effects of microwaves on chemical reactions and hypothesis associated with the microwave effects will discuss.

  8. Microwave Sterilization and Depyrogenation System

    Science.gov (United States)

    Akse, James R.; Dahl, Roger W.; Wheeler, Richard R., Jr.

    2009-01-01

    A fully functional, microgravity-compatible microwave sterilization and depyrogenation system (MSDS) prototype was developed that is capable of producing medical-grade water (MGW) without expendable supplies, using NASA potable water that currently is available aboard the International Space Station (ISS) and will be available for Lunar and planetary missions in the future. The microwave- based, continuous MSDS efficiently couples microwaves to a single-phase, pressurized, flowing water stream that is rapidly heated above 150 C. Under these conditions, water is rapidly sterilized. Endotoxins, significant biological toxins that originate from the cell walls of gram-negative bacteria and which represent another defining MGW requirement, are also deactivated (i.e., depyrogenated) albeit more slowly, with such deactivation representing a more difficult challenge than sterilization. Several innovations culminated in the successful MSDS prototype design. The most significant is the antenna-directed microwave heating of a water stream flowing through a microwave sterilization chamber (MSC). Novel antenna designs were developed to increase microwave transmission efficiency. These improvements resulted in greater than 95-percent absorption of incident microwaves. In addition, incorporation of recuperative heat exchangers (RHxs) in the design reduced the microwave power required to heat a water stream flowing at 15 mL/min to 170 C to only 50 W. Further improvements in energy efficiency involved the employment of a second antenna to redirect reflected microwaves back into the MSC, eliminating the need for a water load and simplifying MSDS design. A quick connect (QC) is another innovation that can be sterilized and depyrogenated at temperature, and then cooled using a unique flow design, allowing collection of MGW at atmospheric pressure and 80 C. The final innovation was the use of in-line mixers incorporated in the flow path to disrupt laminar flow and increase contact time

  9. GA microwave window development

    International Nuclear Information System (INIS)

    Moeller, C.P.; Kasugai, A.; Sakamoto, K.; Takahashi, K.

    1994-10-01

    The GA prototype distributed window was tested in a 32 mm diam. waveguide system at a power density suitable for a MW gyrotron, using the JAERI/Toshiba 110 GHz long pulse internal converter gyrotron in the JAERI test stand. The presence of the untilted distributed window had no adverse effect on the gyrotron operation. A pulse length of 10 times the calculated thermal equilibrium time (1/e time) of 30 msec was reached, and the window passed at least 750 pulses greater than 30 msec and 343 pulses greater than 60 msec. Beyond 100 msec, the window calorimetry reached steady state, allowing the window dissipation to be measured in a single pulse. The measured loss of 4.0% agrees both with the estimated loss, on which the stress calculations are based, and with the attenuation measured at low power in the HE 11 mode. After the end of the tests, the window was examined; no evidence of arcing air coating was found in the part of the window directly illuminated by the microwaves, although there was discoloration in a recess containing an optical diagnostic which outgassed, causing a local discharge to occur in that recess. Finally, there was no failure of the metal-sapphire joints during a total operating time of 50 seconds consisting of pulses longer than 30 msec

  10. Microwave. Instructor's Edition. Louisiana Vocational-Technical Education.

    Science.gov (United States)

    Blanton, William

    This publication contains related study assignments and job sheets for a course in microwave technology. The course is organized into 12 units covering the following topics: introduction to microwave, microwave systems, microwave oscillators, microwave modulators, microwave transmission lines, transmission lines, detectors and mixers, microwave…

  11. Wideband Agile Digital Microwave Radiometer

    Science.gov (United States)

    Gaier, Todd C.; Brown, Shannon T.; Ruf, Christopher; Gross, Steven

    2012-01-01

    The objectives of this work were to take the initial steps needed to develop a field programmable gate array (FPGA)- based wideband digital radiometer backend (>500 MHz bandwidth) that will enable passive microwave observations with minimal performance degradation in a radiofrequency-interference (RFI)-rich environment. As manmade RF emissions increase over time and fill more of the microwave spectrum, microwave radiometer science applications will be increasingly impacted in a negative way, and the current generation of spaceborne microwave radiometers that use broadband analog back ends will become severely compromised or unusable over an increasing fraction of time on orbit. There is a need to develop a digital radiometer back end that, for each observation period, uses digital signal processing (DSP) algorithms to identify the maximum amount of RFI-free spectrum across the radiometer band to preserve bandwidth to minimize radiometer noise (which is inversely related to the bandwidth). Ultimately, the objective is to incorporate all processing necessary in the back end to take contaminated input spectra and produce a single output value free of manmade signals to minimize data rates for spaceborne radiometer missions. But, to meet these objectives, several intermediate processing algorithms had to be developed, and their performance characterized relative to typical brightness temperature accuracy re quirements for current and future microwave radiometer missions, including those for measuring salinity, soil moisture, and snow pack.

  12. Microwave Plasma System: PVA Tepla 300

    Data.gov (United States)

    Federal Laboratory Consortium — Description:CORAL Name: Microwave AsherA tool using microwave oxygen plasma to remove organics on the surfacesSpecifications / Capabilities:Frequency: 2.45 GHzPower:...

  13. DMSP SSM/I- Microwave Imager

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The SSM/I is a seven-channel, four frequency, linearly-polarized, passive microwave radiometric system which measures atmospheric, ocean and terrain microwave...

  14. Digital microwave communication engineering point-to-point microwave systems

    CERN Document Server

    Kizer, George

    2013-01-01

    The first book to cover all engineering aspects of microwave communication path design for the digital age Fixed point-to-point microwave systems provide moderate-capacity digital transmission between well-defined locations. Most popular in situations where fiber optics or satellite communication is impractical, it is commonly used for cellular or PCS site interconnectivity where digital connectivity is needed but not economically available from other sources, and in private networks where reliability is most important. Until now, no book has adequately treated all en

  15. Fotograafia aktualiseerumisest ja enesemõistmise muutumisest 1980. aastate lõpul - 1990. aastate algul. DeStudio juhtum / Eero Epner

    Index Scriptorium Estoniae

    Epner, Eero, 1978-

    2004-01-01

    Fotograafia aktualiseerumisest kujutava kunsti liigina 1980-ndatel ja rühmitusest DeStudio, kelle looming oli oluline strateegia poolest, mis uuris pildi rolli ühiskonnas ja selle tähenduse sõltuvust kultuurilistest koodidest

  16. Microwavable thermal energy storage material

    Science.gov (United States)

    Salyer, Ival O.

    1998-09-08

    A microwavable thermal energy storage material is provided which includes a mixture of a phase change material and silica, and a carbon black additive in the form of a conformable dry powder of phase change material/silica/carbon black, or solid pellets, films, fibers, moldings or strands of phase change material/high density polyethylene/ethylene-vinyl acetate/silica/carbon black which allows the phase change material to be rapidly heated in a microwave oven. The carbon black additive, which is preferably an electrically conductive carbon black, may be added in low concentrations of from 0.5 to 15% by weight, and may be used to tailor the heating times of the phase change material as desired. The microwavable thermal energy storage material can be used in food serving applications such as tableware items or pizza warmers, and in medical wraps and garments.

  17. Compact Microwave Fourier Spectrum Analyzer

    Science.gov (United States)

    Savchenkov, Anatoliy; Matsko, Andrey; Strekalov, Dmitry

    2009-01-01

    A compact photonic microwave Fourier spectrum analyzer [a Fourier-transform microwave spectrometer, (FTMWS)] with no moving parts has been proposed for use in remote sensing of weak, natural microwave emissions from the surfaces and atmospheres of planets to enable remote analysis and determination of chemical composition and abundances of critical molecular constituents in space. The instrument is based on a Bessel beam (light modes with non-zero angular momenta) fiber-optic elements. It features low power consumption, low mass, and high resolution, without a need for any cryogenics, beyond what is achievable by the current state-of-the-art in space instruments. The instrument can also be used in a wide-band scatterometer mode in active radar systems.

  18. Microwave Activation of Drug Release

    DEFF Research Database (Denmark)

    Jónasson, Sævar Þór

    to verify the presence of creeping waves. Due to the inherent high wave attenuation in biological tissues, such as muscles at microwave frequencies, sensitive receiving structures are suggested to be integrated on a drug capsule. The capsules are meant to contain the pharmaceutical drugs and the receiving......Due to current limitations in control of pharmaceutical drug release in the body along with increasing medicine use, methods of externally-controlled drug release are of high interest. In this thesis, the use of microwaves is proposed as a technique with the purpose of externally activating...... setup, called the microwave activation system has been developed and tested on a body phantom that emulates the human torso. The system presented in this thesis, operates unobtrusively, i.e. without physically interfering with the target (patient). The torso phantom is a simple dual-layered cylindrical...

  19. Josephson tunnel junction microwave attenuator

    DEFF Research Database (Denmark)

    Koshelets, V. P.; Shitov, S. V.; Shchukin, A. V.

    1993-01-01

    A new element for superconducting electronic circuitry-a variable attenuator-has been proposed, designed, and successfully tested. The principle of operation is based on the change in the microwave impedance of a superconductor-insulator-superconductor (SIS) Josephson tunnel junction when dc biased...... at different points in the current-voltage characteristic. Both numerical calculations based on the Tien-Gordon theory and 70-GHz microwave experiments have confirmed the wide dynamic range (more than 15-dB attenuation for one stage) and the low insertion loss in the ''open'' state. The performance of a fully...... integrated submillimeter receiver circuit which comprises a flux-flow oscillator (FFO) as local oscillator, a superconducting variable attenuator, and a microwave SIS detector with tuned-out capacitance is also reported....

  20. Developing Business Models in the Video Game Industry : An evaluation to strategic choices made by small and medium-sized development studios

    OpenAIRE

    Zijlstra, Peter; Visser, Christiaan

    2012-01-01

    Digitalization has given rise to new opportunities for small and medium-sized video game development studios. No longer bound by physical products and creative restrains, the de-veloper has been empowered with independency. This qualitative study is aimed to under-stand how a development studio develops their business model and how underlying strate-gy is formulated. Additionally we evaluate the degree of innovativeness of the business model in terms of radical and incremental innovation acco...

  1. A Study On The Influence Of Illuminance Quality To Student’s Performance Of Visual Activities: Case Study Of Architecture Studio Room In Universitas Islam Indonesia

    OpenAIRE

    Bayuaji, Wisnu Hendrawan; Ayu Iswardhani, Tanty Kesuma; Risky, Alif Angga

    2017-01-01

    This research aims to measure and evaluate the level of illuminance quality in architecture studio room in relation to the achievement of standard performance and minimum visual comfortableness that should be fulfilled. This study also explores the effect of both illumination quality and quantity to the students physical and psychological performance in conducting visual activities in the architecture studio room. This evaluation will also evaluate the deviation between perception of brightne...

  2. 47 CFR 101.141 - Microwave modulation.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Microwave modulation. 101.141 Section 101.141... SERVICES Technical Standards § 101.141 Microwave modulation. (a) Microwave transmitters employing digital modulation techniques and operating below 25.25 GHz (except for MVDDS stations in the 12,200-12,700 MHz band...

  3. Microwave assisted centrifuge and related methods

    Science.gov (United States)

    Meikrantz, David H [Idaho Falls, ID

    2010-08-17

    Centrifuge samples may be exposed to microwave energy to heat the samples during centrifugation and to promote separation of the different components or constituents of the samples using a centrifuge device configured for generating microwave energy and directing the microwave energy at a sample located in the centrifuge.

  4. Prospects of microwave processing: An overview

    Indian Academy of Sciences (India)

    Administrator

    wave heating. In addition, microwave energy is being explored for the sintering of metal powders also. Ceramic and metal nanopowders have been sintered in microwave. Furthermore, initiatives have been taken to process the amorphous materials (e.g. glass) by microwave heating. Besides this, an attempt has been made ...

  5. The microwave era is just beginning

    International Nuclear Information System (INIS)

    Grad, P.

    1989-01-01

    Microwave energy applicators in curing rubber products and in ceramic manufacture are enunciated by some of the participants at the First Australian Symposium on Microwave Power Applications held in February 1989 at Wollongong. The advantages and disadvantages of microwave heating over conventional methods are stated

  6. Particle physics implications of Wilkinson microwave anisotropy ...

    Indian Academy of Sciences (India)

    ... Journals; Pramana – Journal of Physics; Volume 63; Issue 6. Particle physics implications of Wilkinson microwave anisotropy project measurements. U A Yajnik. Volume 63 Issue 6 December 2004 pp 1317-1330 ... Keywords. Cosmic microwave background radiation; inflation; Wilkinson microwave anisotropy project.

  7. Microwave torch. Physics and applications.

    Science.gov (United States)

    Gritsinin, Sergei; Knyazev, Vitalii; Kossyi, Igor

    2004-09-01

    New construction of a coaxial microwave torch (CMT) has been developed, tested and investigated. CMT provides a means for plasma stream production virtually in all gases and gaseous mixture flow at atmospheric pressure. A broad spectrum of diagnostics has been applied including microwave and laser interferometry, optical active and absorptive spectroscopy, laser holographic interferometry, microwave radiation detection, high-speed photography, etc. The time evolution of the torch operating in the pulsed mode is considered. It has been revealed that the evolution is different in noble and molecular gases. The characteristic feature of torches in noble gases is a dense core with plasma density no less than 1016 cm-3. Plasma bunches with density of 1014-1015 cm-3 successively propagate downstream from this core, which are seen as glow bursts. In molecular gases, the core is absent and the torch is formed by propagating plasma bunches. By optical diagnostics application temperature of neutral component of microwave torch has been determined. With high efficiency energy of microwave radiation comes into gas heating. Gas temperature is maximal near the nozzle (4,5 - 5,0 kK) and falls down in axial direction (to 2,5 - 3,0 kK). Torch is thermally-non-equilibrium plasma formation capable of significant change of working and surrounding gaseous state. Peculiarities of discharge development and maintenance are under discussion as well as possibilities to use microwave torch as a spaceborne plasma source, combustion ignitor, mean for nanoparticles production, different plasmachemical applications etc. Contact information: Mailing address: Prof. I.A.Kossyi General Physics Institute, 119991, Vavilov Street 38 Moscow, Russia Tel.: 7(095)135-41-65; Fax: 7(095)135-80-11 E-mail: kossyi@fpl.gpi.ru

  8. Search for design intelligence: A field study on the role of emotional intelligence in architectural design studios

    Directory of Open Access Journals (Sweden)

    Sajjad Nazidizaji

    2014-12-01

    Full Text Available The design studio is the core of the architecture curriculum. Interpersonal interactions have a key role during the processes of design and critique. The influence of emotional intelligence (EQ on interpersonal communication skills has been widely proven. This study examines the correlation between EQ and architectural design competence. To achieve this, 78 architecture students were selected via a simple random sampling method and tested using an EQ test questionnaire developed by Bradbury and Greaves (2006. The scores of five architectural design studio courses (ADS-1, ADS-2, ADS-3, ADS-4, and ADS-5 were used as indicators of the progress in design of the students. Descriptive and inferential statistics methods were both employed to analyze the research data. The methods included correlation analysis, mean comparison t-test for independent samples, and single sample t-test. Findings showed no significant relationship between EQ and any of the indicators.

  9. Evaluating the use of PAO (4 cSt polyalphaoelfin) oil instead of DOP (di-octyl phthalate) oil for measuring the aerosol capture of nuclear canister filters

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Murray E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-07-18

    This document details the distinction between using PAO (4 cSt polyalphaoelfin) oil instead of DOP (di-octyl phthalate) oil for measuring the aerosol capture of filters. This document is developed to justify the use of PAO rather than DOP for evaluating the performance of filters in the SAVY 4000 and Hagan containers. The design criteria (Anderson et al, 2012) for purchasing SAVY 4000 containers and the Safety Analysis Report for the SAVY 4000 Container Series specified that the filter must “capture greater than 99.97% of 0.45 μm mean diameter dioctyl phthalate (DOP) aerosol at the rated flow with a DOP concentration of 65±15 micrograms per liter.”This corresponds to a leakage percent of 0.03% (3.0x10-2). The density of DOP oil is 985 kg/m3 and the density of PAO oil is 819 kg/m3. ATI Test Inc measured the mass mean diameter of aerosol distributions produced by a single Laskin type III-A nozzle operating at a 20 psig air pressure as 0.563 μm for DOP oil and 0.549 μm for PAO oil. (See Appendix A.) For both types of oil in this document, the single fiber method calculated the leakage percent to be 4.4x10-5 for DOP oil and 4.7x10-5 for PAO oil. Although the percent error between these two quantities is 7.7%, these calculated leakage percent values are more than two orders of magnitude less than the criterion specified in the SAVY canister SAR. As a point of reference, the photometer used to measure the SAVY canister filter performance cannot resolve values for the leakage percent below 1.0x10-5. Additionally, over a range of particle sizes from 0.01 μm to 3.0 μm, there was less than 4.0x10-5 error between the calculated filter efficiency for the two types of oil at any particular particle size diameter. In conclusion, the difference between using DOP and PAO for testing SAVY canister filters is of inconsequential concern.

  10. Microwave power transmission by satellites

    Science.gov (United States)

    Keydel, W.

    The MPTS (microwave power transmission system) is examined with regard to the problems involved, the proposed solutions, the future outlook, and the necessity for further work. The MPTS is analyzed with regard to system considerations, design considerations (power transmission, frequency selection, power generation, the spacetenna, microwave propagation problems, the rectenna, and efficiency), environmental impacts (electromagnetic compatibility and RF interference, and health and ecological effects). It is concluded that the MPTS is feasible, but that further studies are needed to optimize the system with respect to such factors as efficiency and environmental impact.

  11. Microwave materials for wireless applications

    CERN Document Server

    Cruickshank, David B

    2011-01-01

    This practical resource offers you an in-depth, up-to-date understanding of the use of microwave magnetic materials for cutting-edge wireless applications. The book discusses device applications used in wireless infrastructure base stations, point-to-point radio links, and a range of more specialized microwave systems. You find detailed discussions on the attributes of each family of magnetic materials with respect to specific wireless applications. Moreover, the book addresses two of the hottest topics in the field today - insertion loss and intermodulation. This comprehensive reference also

  12. Valutazione della qualitá dei dati in uno studio post marketing

    Directory of Open Access Journals (Sweden)

    D. D’Alessandro

    2003-05-01

    Full Text Available

    Obiettivo: misurare l'affidabilita nella segnalazione
    di eventi avversi a vaccino nell'ambito di uno studio post-marketing sulla tollerabilita della vaccinazione antipneumococcica (AP in associazione con la vaccinazione antinfluenzale (AI nella popolazione anziana.


    Metodi: e stato predisposto un modello di regressione
    logistica per stimare gli OR tra la segnalazione di almeno un effetto collaterale locale (y ed alcune variabili individuali dei vaccinati (x1: eta .75 anni; x2: sesso; x3: allergie; x4: associazione AI+AP; x5: vivere solo; x6: patologie croniche. I medici aderenti al progetto (229 sono stati stratificati in cinque categorie in funzione dellfincidenza media di eventi avversi da loro registrata: 0% (29, 1-5%
    (68, 6-10% (50, 11-50% (72, .50% (10. Lo stesso modello di regressione e stato applicato ai quattro
    sotto-gruppi di vaccinati afferenti alle categorie di medici che hanno segnalato sintomi, per valutare la coerenza degli OR registrati nei gruppi.

    Risultati: tra i 29.086 vaccinati, l'f11,3% (3.278 ha segnalato almeno un evento avverso locale nelle
    72 ore successive alla vaccinazione: 9,9% tra i soggetti vaccinati con AI e 13,9% tra i vaccinati con
    AI+AP. I fattori significativamente associati all'faumento di rischio sono: AI+AP (OR 1,4; allergie (OR 1,3; patologie croniche (OR 1,3. L' applicazione del modello di regressione ai sotto-gruppi di vaccinati ha mostrato un trend negli OR per le categorie di medici che hanno segnalato dall'f1-5% fino all'f11- 50%, mostrando un'effettiva differenza di rischio dei pazienti.

    Tale coerenza non si e evinta nell'ultima categoria (.50%, dove tali fattori appaiono addiritura protettivi nei riguardi dei sintomi (AI+AP: OR 0,5; allergie: OR 0,7, o non associati
    (patologie croniche: OR 1,0.

    Conclusioni: il 4,3% dei medici arruolati nello studio (10 su 229 ha

  13. Search for design intelligence: A field study on the role of emotional intelligence in architectural design studios

    OpenAIRE

    Nazidizaji, Sajjad; Tomé, Ana; Regateiro, Francisco

    2017-01-01

    The design studio is the core of the architecture curriculum. Interpersonal interactions have a key role during the processes of design and critique. The influence of emotional intelligence (EQ) on interpersonal communication skills has been widely proven. This study examines the correlation between EQ and architectural design competence. To achieve this, 78 architecture students were selected via a simple random sampling method and tested using an EQ test questionnaire developed by Bradbury ...

  14. The Implementation of Sustainable Approaches in the Architectural Design Studio Developing Architectural Designs Using the Solar Envelope Method

    Directory of Open Access Journals (Sweden)

    Fatih Canan

    2016-07-01

    Full Text Available Teaching students the notion of sustainability during their architectural education is of great importance. The architectural design studio course is the most important environment in which theory and practice can be brought together. In this study, the development of architectural design by using the solar envelope method–which can be considered within the scope of sustainable architectur–was examined in the architectural design studio course in the department of architecture in our university. In the design studio, students had the opportunity to directly observe the impact and use of scientific information that is often difficult to obtain and access. The advantages and disadvantages that appear during the application of this mentioned method was identified based on the observations that were made, and feedback was provided by the students. This method helped the students in conceiving architectural projects in the context of sustainability in a more applied way rather than as a superficial and solely theoretic concept. Through this method, students have gained additional sensitivity regarding solar architecture and perceived its effect on form and space. According to the feedback obtained from students, the most important disadvantage was design freedom. Students found it stringent to be bound to make their designs within very well established boundaries from the early stages. The authors think that the limitations increased creativity and allowed interesting and unusual solutions. The projects were all formed on the basis of the rhythm of nature, which attached more value and meaning to architecture.

  15. Recent Advancements in Microwave Imaging Plasma Diagnostics

    International Nuclear Information System (INIS)

    Park, H.; Chang, C.C.; Deng, B.H.; Domier, C.W.; Donni, A.J.H.; Kawahata, K.; Liang, C.; Liang, X.P.; Lu, H.J.; Luhmann, N.C. Jr.; Mase, A.; Matsuura, H.; Mazzucato, E.; Miura, A.; Mizuno, K.; Munsat, T.; Nagayama, K.; Nagayama, Y.; Pol, M.J. van de; Wang, J.; Xia, Z.G.; Zhang, W-K.

    2002-01-01

    Significant advances in microwave and millimeter wave technology over the past decade have enabled the development of a new generation of imaging diagnostics for current and envisioned magnetic fusion devices. Prominent among these are revolutionary microwave electron cyclotron emission imaging (ECEI), microwave phase imaging interferometers, imaging microwave scattering and microwave imaging reflectometer (MIR) systems for imaging electron temperature and electron density fluctuations (both turbulent and coherent) and profiles (including transport barriers) on toroidal devices such as tokamaks, spherical tori, and stellarators. The diagnostic technology is reviewed, and typical diagnostic systems are analyzed. Representative experimental results obtained with these novel diagnostic systems are also presented

  16. Recent Advancements in Microwave Imaging Plasma Diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    H. Park; C.C. Chang; B.H. Deng; C.W. Domier; A.J.H. Donni; K. Kawahata; C. Liang; X.P. Liang; H.J. Lu; N.C. Luhmann, Jr.; A. Mase; H. Matsuura; E. Mazzucato; A. Miura; K. Mizuno; T. Munsat; K. and Y. Nagayama; M.J. van de Pol; J. Wang; Z.G. Xia; W-K. Zhang

    2002-03-26

    Significant advances in microwave and millimeter wave technology over the past decade have enabled the development of a new generation of imaging diagnostics for current and envisioned magnetic fusion devices. Prominent among these are revolutionary microwave electron cyclotron emission imaging (ECEI), microwave phase imaging interferometers, imaging microwave scattering and microwave imaging reflectometer (MIR) systems for imaging electron temperature and electron density fluctuations (both turbulent and coherent) and profiles (including transport barriers) on toroidal devices such as tokamaks, spherical tori, and stellarators. The diagnostic technology is reviewed, and typical diagnostic systems are analyzed. Representative experimental results obtained with these novel diagnostic systems are also presented.

  17. Ceramic matrix composites by microwave assisted CVI

    International Nuclear Information System (INIS)

    Currier, R.P.; Devlin, D.J.

    1993-01-01

    Chemical vapor infiltration (CVI) processes for producing continuously reinforced ceramic composites are reviewed. Potential advantages of microwave assisted CVI are noted and numerical studies of microwave assisted CVI are reviewed. The models predict inverted thermal gradients in fibrous ceramic preforms subjected to microwave radiation and suggest processing strategies for achieving uniformly dense composites. Comparisons are made to experimental results on silicon-based composite systems. The role played by the relative ability of fiber and matrix to dissipate microwave energy is noted. Results suggest that microwave induced inverted gradients can be exploited to promote inside-out densification. 10 refs., 2 figs

  18. Microwave processing of radioactive materials-I

    International Nuclear Information System (INIS)

    White, T.L.; Berry, J.B.

    1989-01-01

    This paper is the first of two papers that reviews the major past and present applications of microwave energy for processing radioactive materials, with particular emphasis on processing radioactive wastes. Microwave heating occurs through the internal friction produced inside a dielectric material when its molecules vibrate in response to an oscillating microwave field. For this presentation, we shall focus on the two FCC-approved microwave frequencies for industrial, scientific, and medical use, 915 and 2450 MHz. Also, because of space limitations, we shall postpone addressing plasma processing of hazardous wastes using microwave energy until a later date. 13 refs., 4 figs

  19. A New Compact Octagonal Shape Perfect Metamaterial Absorber for Microwave Applications

    Directory of Open Access Journals (Sweden)

    Mohammad Jakir Hossain

    2017-12-01

    Full Text Available A new compact octagonal shape perfect metamaterial absorber (PMA design, numerical simulation, fabrication, and investigational verification of unit cell that is based on a simple structure are presented in this paper. The suggested structure comprised of three layers, in which interact to produce the plasmonic resonances. The finite-integration technique (FIT based Computer Simulation Technology (CST microwave electromagnetic simulator was utilized to examine the design parameters and conduct absorption analysis. The design structure exhibited peak absorption values as 99.64% and 99.95% at frequencies 8.08 GHz and 11.41 GHz, respectively. The absorption characteristics were analysed using the polarization angle of the structure, layer thickness, PMA with resistive load, and number of rings. An N5227A vector network analyser was used for the measurement. The measured results of the fabricated prototype were in good agreement with the simulation results. The suggested perfect absorber structure enables innumerable application aimed at X-band for applications like, defence, security, and stealth technology.

  20. Studio ricostruttivo di una casa messapica in località Cunella a Muro Leccese

    Directory of Open Access Journals (Sweden)

    Maria Chiffi

    2014-07-01

    Full Text Available ItQuesto studio ricostruttivo è il risultato finale di una tesi di laurea in Beni Culturali, condotta sotto la supervisione scientifica di L. Giardino (UNILE. L’elaborazione di modelli costruttivi della casa in ambito messapico trova diversi precedenti in studi autorevoli. Tuttavia questa proposta nasce in risposta alla successione stratigrafica del sito in località Cunella a Muro Leccese, che permette di formulare una singolare soluzione costruttiva, ben documentata in ogni parte del mondo e forse applicabile in molti altri contesti antichi di età messapica. Quello che emerge da questa ricostruzione è il riconoscimento di una logica funzionale che si ritrova usata anche oggi in molte architetture rurali.EnThis study reconstructive is the final result of a thesis in Cultural Heritage, conducted under the scientific supervision of L. Giardino (UNILE. The development of constructive models of messapian houses (actual Salento region is caddied out in several studies. However, this proposal starts according to the stratigraphic sequence of the site located in Muro Leccese (Cunella locality, which allows us to formulate a singular constructive solution, well documented in every part of the world and perhaps applicable in many other messapian contexts. What emerges from this reconstruction is the recognition of a functional logic that can be found even today in many rural architecture.