WorldWideScience

Sample records for csau evaluation methodology

  1. Needs of the CSAU uncertainty method

    International Nuclear Information System (INIS)

    Prosek, A.; Mavko, B.

    2000-01-01

    The use of best estimate codes for safety analysis requires quantification of the uncertainties. These uncertainties are inherently linked to the chosen safety analysis methodology. Worldwide, various methods were proposed for this quantification. The purpose of this paper was to identify the needs of the Code Scaling, Applicability, and Uncertainty (CSAU) methodology and then to answer the needs. The specific procedural steps were combined from other methods for uncertainty evaluation and new tools and procedures were proposed. The uncertainty analysis approach and tools were then utilized for confirmatory study. The uncertainty was quantified for the RELAP5/MOD3.2 thermalhydraulic computer code. The results of the adapted CSAU approach to the small-break loss-of-coolant accident (SB LOCA) show that the adapted CSAU can be used for any thermal-hydraulic safety analysis with uncertainty evaluation. However, it was indicated that there are still some limitations in the CSAU approach that need to be resolved. (author)

  2. CSAU (Code Scaling, Applicability and Uncertainty)

    International Nuclear Information System (INIS)

    Wilson, G.E.; Boyack, B.E.

    1989-01-01

    Best Estimate computer codes have been accepted by the U.S. Nuclear Regulatory Commission as an optional tool for performing safety analysis related to the licensing and regulation of current nuclear reactors producing commercial electrical power, providing their uncertainty is quantified. In support of this policy change, the NRC and its contractors and consultants have developed and demonstrated an uncertainty quantification methodology called CSAU. The primary use of the CSAU methodology is to quantify safety margins for existing designs; however, the methodology can also serve an equally important role in advanced reactor research for plants not yet built. This paper describes the CSAU methodology, at the generic process level, and provides the general principles whereby it may be applied to evaluations of advanced reactor designs

  3. Uncertainty analysis of minimum vessel liquid inventory during a small-break LOCA in a B ampersand W Plant: An application of the CSAU methodology using the RELAP5/MOD3 computer code

    International Nuclear Information System (INIS)

    Ortiz, M.G.; Ghan, L.S.

    1992-12-01

    The Nuclear Regulatory Commission (NRC) revised the emergency core cooling system licensing rule to allow the use of best estimate computer codes, provided the uncertainty of the calculations are quantified and used in the licensing and regulation process. The NRC developed a generic methodology called Code Scaling, Applicability, and Uncertainty (CSAU) to evaluate best estimate code uncertainties. The objective of this work was to adapt and demonstrate the CSAU methodology for a small-break loss-of-coolant accident (SBLOCA) in a Pressurized Water Reactor of Babcock ampersand Wilcox Company lowered loop design using RELAP5/MOD3 as the simulation tool. The CSAU methodology was successfully demonstrated for the new set of variants defined in this project (scenario, plant design, code). However, the robustness of the reactor design to this SBLOCA scenario limits the applicability of the specific results to other plants or scenarios. Several aspects of the code were not exercised because the conditions of the transient never reached enough severity. The plant operator proved to be a determining factor in the course of the transient scenario, and steps were taken to include the operator in the model, simulation, and analyses

  4. Achieving 95% probability level using best estimate codes and the code scaling, applicability and uncertainty (CSAU) [Code Scaling, Applicability and Uncertainty] methodology

    International Nuclear Information System (INIS)

    Wilson, G.E.; Boyack, B.E.; Duffey, R.B.; Griffith, P.; Katsma, K.R.; Lellouche, G.S.; Rohatgi, U.S.; Wulff, W.; Zuber, N.

    1988-01-01

    Issue of a revised rule for loss of coolant accident/emergency core cooling system (LOCA/ECCS) analysis of light water reactors will allow the use of best estimate (BE) computer codes in safety analysis, with uncertainty analysis. This paper describes a systematic methodology, CSAU (Code Scaling, Applicability and Uncertainty), which will provide uncertainty bounds in a cost effective, auditable, rational and practical manner. 8 figs., 2 tabs

  5. CSAU (code scaling, applicability and uncertainty), a tool to prioritize advanced reactor research

    International Nuclear Information System (INIS)

    Wilson, G.E.; Boyack, B.E.

    1990-01-01

    Best Estimate computer codes have been accepted by the US Nuclear Regulatory Commission as an optional tool for performing safety analysis related to the licensing and regulation of current nuclear reactors producing commercial electrical power, providing their uncertainty is quantified. In support of this policy change, the NRC and its contractors and consultants have developed and demonstrated an uncertainty quantification methodology called CSAU. At the process level, the method is generic to any application which relies on best estimate computer code simulations to determine safe operating margins. The primary use of the CSAU methodology is to quantify safety margins for existing designs; however, the methodology can also serve an equally important role in advanced reactor research for plants not yet built. Applied early, during the period when alternate designs are being evaluated, the methodology can identify the relative importance of the sources of uncertainty in the knowledge of each plant behavior and, thereby, help prioritize the research needed to bring the new designs to fruition. This paper describes the CSAU methodology, at the generic process level, and provides the general principles whereby it may be applied to evaluations of advanced reactor designs. 9 refs., 1 fig., 1 tab

  6. Quantifying reactor safety margins: Application of CSAU [Code Scalability, Applicability and Uncertainty] methodology to LBLOCA: Part 3, Assessment and ranging of parameters for the uncertainty analysis of LBLOCA codes

    International Nuclear Information System (INIS)

    Wulff, W.; Boyack, B.E.; Duffey, R.B.

    1988-01-01

    Comparisons of results from TRAC-PF1/MOD1 code calculations with measurements from Separate Effects Tests, and published experimental data for modeling parameters have been used to determine the uncertainty ranges of code input and modeling parameters which dominate the uncertainty in predicting the Peak Clad Temperature for a postulated Large Break Loss of Coolant Accident (LBLOCA) in a four-loop Westinghouse Pressurized Water Reactor. The uncertainty ranges are used for a detailed statistical analysis to calculate the probability distribution function for the TRAC code-predicted Peak Clad Temperature, as is described in an attendant paper. Measurements from Separate Effects Tests and Integral Effects Tests have been compared with results from corresponding TRAC-PF1/MOD1 code calculations to determine globally the total uncertainty in predicting the Peak Clad Temperature for LBLOCAs. This determination is in support of the detailed statistical analysis mentioned above. The analyses presented here account for uncertainties in input parameters, in modeling and scaling, in computing and in measurements. The analyses are an important part of the work needed to implement the Code Scalability, Applicability and Uncertainty (CSAU) methodology. CSAU is needed to determine the suitability of a computer code for reactor safety analyses and the uncertainty in computer predictions. The results presented here are used to estimate the safety margin of a particular nuclear reactor power plant for a postulated accident. 25 refs., 10 figs., 11 tabs

  7. Small break LOCA RELAP5/MOD3 uncertainty quantification: Bias and uncertainty evaluation for important phenomena

    International Nuclear Information System (INIS)

    Ortiz, M.G.; Ghan, L.S.; Vogl, J.

    1991-01-01

    The Nuclear Regulatory Commission (NRC) revised the Emergency Core Cooling System (ECCS) licensing rule to allow the use of Best Estimate (BE) computer codes, provided the uncertainty of the calculations are quantified and used in the licensing and regulation process. The NRC developed a generic methodology called Code Scaling, Applicability and Uncertainty (CSAU) to evaluate BE code uncertainties. The CSAU methodology was demonstrated with a specific application to a pressurized water reactor (PWR), experiencing a postulated large break loss-of-coolant accident (LBLOCA). The current work is part of an effort to adapt and demonstrate the CSAU methodology to a small break (SB) LOCA in a PWR of B and W design using RELAP5/MOD3 as the simulation tool. The subject of this paper is the Assessment and Ranging of Parameters (Element 2 of the CSAU methodology), which determines the contribution to uncertainty of specific models in the code

  8. Quantifying reactor safety margins: Part 1: An overview of the code scaling, applicability, and uncertainty evaluation methodology

    International Nuclear Information System (INIS)

    Boyack, B.E.; Duffey, R.B.; Griffith, P.

    1988-01-01

    In August 1988, the Nuclear Regulatory Commission (NRC) approved the final version of a revised rule on the acceptance of emergency core cooling systems (ECCS) entitled ''Emergency Core Cooling System; Revisions to Acceptance Criteria.'' The revised rule states an alternate ECCS performance analysis, based on best-estimate methods, may be used to provide more realistic estimates of plant safety margins, provided the licensee quantifies the uncertainty of the estimates and included that uncertainty when comparing the calculated results with prescribed acceptance limits. To support the revised ECCS rule, the NRC and its contractors and consultants have developed and demonstrated a method called the Code Scaling, Applicability, and Uncertainty (CSAU) evaluation methodology. It is an auditable, traceable, and practical method for combining quantitative analyses and expert opinions to arrive at computed values of uncertainty. This paper provides an overview of the CSAU evaluation methodology and its application to a postulated cold-leg, large-break loss-of-coolant accident in a Westinghouse four-loop pressurized water reactor with 17 /times/ 17 fuel. The code selected for this demonstration of the CSAU methodology was TRAC-PF1/MOD1, Version 14.3. 23 refs., 5 figs., 1 tab

  9. Application of code scaling applicability and uncertainty methodology to the large break loss of coolant

    International Nuclear Information System (INIS)

    Young, M.Y.; Bajorek, S.M.; Nissley, M.E.

    1998-01-01

    In the late 1980s, after completion of an extensive research program, the United States Nuclear Regulatory Commission (USNRC) amended its regulations (10CFR50.46) to allow the use of realistic physical models to analyze the loss of coolant accident (LOCA) in a light water reactors. Prior to this time, the evaluation of this accident was subject to a prescriptive set of rules (appendix K of the regulations) requiring conservative models and assumptions to be applied simultaneously, leading to very pessimistic estimates of the impact of this accident on the reactor core. The rule change therefore promised to provide significant benefits to owners of power reactors, allowing them to increase output. In response to the rule change, a method called code scaling, applicability and uncertainty (CSAU) was developed to apply realistic methods, while properly taking into account data uncertainty, uncertainty in physical modeling and plant variability. The method was claimed to be structured, traceable, and practical, but was met with some criticism when first demonstrated. In 1996, the USNRC approved a methodology, based on CSAU, developed by a group led by Westinghouse. The lessons learned in this application of CSAU will be summarized. Some of the issues raised concerning the validity and completeness of the CSAU methodology will also be discussed. (orig.)

  10. Application of realistic (best- estimate) methodologies for large break loss of coolant (LOCA) safety analysis: licensing of Westinghouse ASTRUM evaluation model in Spain

    International Nuclear Information System (INIS)

    Lage, Carlos; Frepoli, Cesare

    2010-01-01

    When the LOCA Final Acceptance Criteria for Light Water Reactors was issued in Appendix K of 10CFR50 both the USNRC and the industry recognized that the rule was highly conservative. At that time, however, the degree of conservatism in the analysis could not be quantified. As a result, the USNRC began a research program to identify the degree of conservatism in those models permitted in the Appendix K rule and to develop improved thermal-hydraulic computer codes so that realistic accident analysis calculations could be performed. The overall results of this research program quantified the conservatism in the Appendix K rule and confirmed that some relaxation of the rule can be made without a loss in safety to the public. Also, from a risk-informed perspective it is recognized that conservatism is not always a complete defense for lack of sophistication in models. In 1988, as a result of the improved understanding of LOCA phenomena, the USNRC staff amended the requirements of 10 CFR 50.46 and Appendix K, 'ECCS Evaluation Models', so that a realistic evaluation model may be used to analyze the performance of the ECCS during a hypothetical LOCA. Under the amended rules, best-estimate plus uncertainty (BEPU) thermal-hydraulic analysis may be used in place of the overly prescriptive set of models mandated by Appendix K rule. Further guidance for the use of best-estimate codes was provided in Regulatory Guide 1.157 To demonstrate use of the revised ECCS rule, the USNRC and its consultants developed a method called the Code Scaling, Applicability, and Uncertainty (CSAU) evaluation methodology as an approach for defining and qualifying a best-estimate thermal-hydraulic code and quantifying the uncertainties in a LOCA analysis. More recently the CSAU principles have been generalized in the Evaluation Model Development and Assessment Process (EMDAP) of Regulatory Guide 1.203. ASTRUM is the Westinghouse Best Estimate Large Break LOCA evaluation model applicable to two-, three

  11. Quantifying reactor safety margins: Application of code scaling, applicability, and uncertainty evaluation methodology to a large-break, loss-of-coolant accident

    International Nuclear Information System (INIS)

    Boyack, B.; Duffey, R.; Wilson, G.; Griffith, P.; Lellouche, G.; Levy, S.; Rohatgi, U.; Wulff, W.; Zuber, N.

    1989-12-01

    The US Nuclear Regulatory Commission (NRC) has issued a revised rule for loss-of-coolant accident/emergency core cooling system (ECCS) analysis of light water reactors to allow the use of best-estimate computer codes in safety analysis as an option. A key feature of this option requires the licensee to quantify the uncertainty of the calculations and include that uncertainty when comparing the calculated results with acceptance limits provided in 10 CFR Part 50. To support the revised ECCS rule and illustrate its application, the NRC and its contractors and consultants have developed and demonstrated an uncertainty evaluation methodology called code scaling, applicability, and uncertainty (CSAU). The CSAU methodology and an example application described in this report demonstrate that uncertainties in complex phenomena can be quantified. The methodology is structured, traceable, and practical, as is needed in the regulatory arena. The methodology is systematic and comprehensive as it addresses and integrates the scenario, experiments, code, and plant to resolve questions concerned with: (a) code capability to scale-up processes from test facility to full-scale nuclear power plants; (b) code applicability to safety studies of a postulated accident scenario in a specified nuclear power plant; and (c) quantifying uncertainties of calculated results. 127 refs., 55 figs., 40 tabs

  12. Screening Risk Evaluation methodology

    International Nuclear Information System (INIS)

    Hopper, K.M.

    1994-01-01

    The Screening Risk Evaluation (SRE) Guidance document is a set of guidelines provided for the uniform implementation of SREs performed on D ampersand D facilities. These guidelines are designed specifically for the completion of the second (semi-quantitative screening) phase of the D ampersand D Risk-Based Process. The SRE Guidance produces screening risk scores reflecting levels of risk through the use of risk ranking indices. Five types of possible risk are calculated from the SRE: current releases, worker exposures, future releases, physical hazards, and criticality. The Current Release Index (CRI) calculates the risk to human health and the environment from ongoing or probable releases within a one year time period. The Worker Exposure Index (WEI) calculates the risk to workers, occupants, and visitors in D ampersand D facilities of contaminant exposure. The Future Release Index (FRI) calculates the risk of future releases of contaminants, after one year, to human health and the environment. The Physical Hazards Index (PHI) calculates the risk-to human health due to factors other than that of contaminants. The index of Criticality is approached as a modifying factor to the entire SRE, due to the fact that criticality issues are strictly regulated under DOE. Screening risk results will be tabulated in matrix form and Total Risk will be calculated (weighted equation) to produce a score on which to base early action recommendations. Other recommendations from the screening risk scores will be made based either on individual index scores or from reweighted Total Risk calculations. All recommendations based on the SRE will be made based on a combination of screening risk scores, decision drivers, and other considerations, determined on a project by project basis. The SRE is the first and most important step in the overall D ampersand D project level decision making process

  13. Inventory differences: An evaluation methodology

    International Nuclear Information System (INIS)

    Heinberg, C.L.; Roberts, N.J.

    1987-01-01

    This paper discusses an evaluation methodology which is used for inventory differences at the Los Alamos National Laboratory. It is recognized that there are various methods which can be, and are being, used to evaluate process inventory differences at DOE facilities. The purpose of this paper is to share our thoughts on the subject and our techniques with those who are responsible for the evaluation of inventory differences at their facility. One of the most dangerous aspects of any evaluation technique, especially one as complex as most inventory difference evaluations tend to be, is to fail to look at the tools being used as indicators. There is a tendency to look at the results of an evaluation by one technique as an absolute. At the Los Alamos National Laboratory, several tools are used and the final evaluation is based on a combination of the observed results of a many-faceted evaluation. The tools used and some examples are presented

  14. Utilizing elements of the CSAU phenomena identification and ranking table (PIRT) to qualify a PWR non-LOCA transients system code

    Energy Technology Data Exchange (ETDEWEB)

    Greene, K.R.; Fletcher, C.D.; Gottula, R.C.; Lindquist, T.R.; Stitt, B.D. [Framatome ANP, Richland, WA (United States)

    2001-07-01

    Licensing analyses of Nuclear Regulatory Commission (NRC) Standard Review Plan (SRP) Chapter 15 non-LOCA transients are an important part of establishing operational safety limits and design limits for nuclear power plants. The applied codes and methods are generally qualified using traditional methods of benchmarking and assessment, sample problems, and demonstration of conservatism. Rigorous formal methods for developing code and methodology have been created and applied to qualify realistic methods for Large Break Loss-of-Coolant Accidents (LBLOCA's). This methodology, Code Scaling, Applicability, and Uncertainty (CSAU), is a very demanding, resource intensive, process to apply. It would be challenging to apply a comprehensive and complete CSAU level of analysis, individually, to each of the more than 30 non-LOCA transients that comprise Chapter 15 events. However, certain elements of the process can be easily adapted to improve quality of the codes and methods used to analyze non- LOCA transients. One of these elements is the Phenomena Identification and Ranking Table (PIRT). This paper presents the results of an informally constructed PIRT that applies to non-LOCA transients for Pressurized Water Reactors (PWR's) of the Westinghouse and Combustion Engineering design. A group of experts in thermal-hydraulics and safety analysis identified and ranked the phenomena. To begin the process, the PIRT was initially performed individually by each expert. Then through group interaction and discussion, a consensus was reached on both the significant phenomena and the appropriate ranking. The paper also discusses using the PIRT as an aid to qualify a 'conservative' system code and methodology. Once agreement was obtained on the phenomena and ranking, the table was divided into six functional groups, by nature of the transients, along the same lines as Chapter 15. Then, assessment and disposition of the significant phenomena was performed. The PIRT and

  15. Methodology for flammable gas evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, J.D., Westinghouse Hanford

    1996-06-12

    There are 177 radioactive waste storage tanks at the Hanford Site. The waste generates flammable gases. The waste releases gas continuously, but in some tanks the waste has shown a tendency to trap these flammable gases. When enough gas is trapped in a tank`s waste matrix, it may be released in a way that renders part or all of the tank atmosphere flammable for a period of time. Tanks must be evaluated against previously defined criteria to determine whether they can present a flammable gas hazard. This document presents the methodology for evaluating tanks in two areas of concern in the tank headspace:steady-state flammable-gas concentration resulting from continuous release, and concentration resulting from an episodic gas release.

  16. An Overview of Westinghouse Realistic Large Break LOCA Evaluation Model

    Directory of Open Access Journals (Sweden)

    Cesare Frepoli

    2008-01-01

    Full Text Available Since the 1988 amendment of the 10 CFR 50.46 rule in 1988, Westinghouse has been developing and applying realistic or best-estimate methods to perform LOCA safety analyses. A realistic analysis requires the execution of various realistic LOCA transient simulations where the effect of both model and input uncertainties are ranged and propagated throughout the transients. The outcome is typically a range of results with associated probabilities. The thermal/hydraulic code is the engine of the methodology but a procedure is developed to assess the code and determine its biases and uncertainties. In addition, inputs to the simulation are also affected by uncertainty and these uncertainties are incorporated into the process. Several approaches have been proposed and applied in the industry in the framework of best-estimate methods. Most of the implementations, including Westinghouse, follow the Code Scaling, Applicability and Uncertainty (CSAU methodology. Westinghouse methodology is based on the use of the WCOBRA/TRAC thermal-hydraulic code. The paper starts with an overview of the regulations and its interpretation in the context of realistic analysis. The CSAU roadmap is reviewed in the context of its implementation in the Westinghouse evaluation model. An overview of the code (WCOBRA/TRAC and methodology is provided. Finally, the recent evolution to nonparametric statistics in the current edition of the W methodology is discussed. Sample results of a typical large break LOCA analysis for a PWR are provided.

  17. Methodology of formal software evaluation

    International Nuclear Information System (INIS)

    Tuszynski, J.

    1998-01-01

    Sydkraft AB, the major Swedish utility, owner of ca 6000 MW el installed in nuclear (NPP Barsebaeck and NPP Oskarshamn), fossil fuel and hydro Power Plants is facing modernization of the control systems of the plants. Standards applicable require structured, formal methods for implementation of the control functions in the modem, real time software systems. This presentation introduces implementation methodology as discussed presently at the Sydkraft organisation. The approach suggested is based upon the process of co-operation of three parties taking part in the implementation; owner of the plant, vendor and Quality Assurance (QA) organisation. QA will be based on tools for formal software validation and on systematic gathering by the owner of validated and proved-by-operation control modules for the concern-wide utilisation. (author)

  18. Nuclear power plant simulation facility evaluation methodology

    International Nuclear Information System (INIS)

    Haas, P.M.; Carter, R.J.; Laughery, K.R. Jr.

    1985-01-01

    A methodology for evaluation of nuclear power plant simulation facilities with regard to their acceptability for use in the US Nuclear Regulatory Commission (NRC) operator licensing exam is described. The evaluation is based primarily on simulator fidelity, but incorporates some aspects of direct operator/trainee performance measurement. The panel presentation and paper discuss data requirements, data collection, data analysis and criteria for conclusions regarding the fidelity evaluation, and summarize the proposed use of direct performance measurment. While field testing and refinement of the methodology are recommended, this initial effort provides a firm basis for NRC to fully develop the necessary methodology

  19. PWR reload safety evaluation methodology

    International Nuclear Information System (INIS)

    Doshi, P.K.; Chapin, D.L.; Love, D.S.

    1993-01-01

    The current practice for WWER safety analysis is to prepare the plant Safety Analysis Report (SAR) for initial plant operation. However, the existing safety analysis is typically not evaluated for reload cycles to confirm that all safety limits are met. In addition, there is no systematic reanalysis or reevaluation of the safety analyses after there have been changes made to the plant. The Westinghouse process is discussed which is in contrast to this and in which the SAR conclusions are re-validated through evaluation and/or analysis of each reload cycle. (Z.S.)

  20. Covariance Evaluation Methodology for Neutron Cross Sections

    Energy Technology Data Exchange (ETDEWEB)

    Herman,M.; Arcilla, R.; Mattoon, C.M.; Mughabghab, S.F.; Oblozinsky, P.; Pigni, M.; Pritychenko, b.; Songzoni, A.A.

    2008-09-01

    We present the NNDC-BNL methodology for estimating neutron cross section covariances in thermal, resolved resonance, unresolved resonance and fast neutron regions. The three key elements of the methodology are Atlas of Neutron Resonances, nuclear reaction code EMPIRE, and the Bayesian code implementing Kalman filter concept. The covariance data processing, visualization and distribution capabilities are integral components of the NNDC methodology. We illustrate its application on examples including relatively detailed evaluation of covariances for two individual nuclei and massive production of simple covariance estimates for 307 materials. Certain peculiarities regarding evaluation of covariances for resolved resonances and the consistency between resonance parameter uncertainties and thermal cross section uncertainties are also discussed.

  1. Health economic evaluation: important principles and methodology.

    Science.gov (United States)

    Rudmik, Luke; Drummond, Michael

    2013-06-01

    To discuss health economic evaluation and improve the understanding of common methodology. This article discusses the methodology for the following types of economic evaluations: cost-minimization, cost-effectiveness, cost-utility, cost-benefit, and economic modeling. Topics include health-state utility measures, the quality-adjusted life year (QALY), uncertainty analysis, discounting, decision tree analysis, and Markov modeling. Economic evaluation is the comparative analysis of alternative courses of action in terms of both their costs and consequences. With increasing health care expenditure and limited resources, it is important for physicians to consider the economic impact of their interventions. Understanding common methodology involved in health economic evaluation will improve critical appraisal of the literature and optimize future economic evaluations. Copyright © 2012 The American Laryngological, Rhinological and Otological Society, Inc.

  2. Framework of Comprehensive Proliferation Resistance Evaluation Methodology

    International Nuclear Information System (INIS)

    Kim, Min Su; Jo, Seong Youn; Kim, Min Soo; Kim, Jae San; Lee, Hyun Kyung

    2007-01-01

    Civilian nuclear programs can be used as a pretext to acquire technologies, materials, equipment for military weapon programs. Consequently, international society has a strong incentive to develop a nuclear system more proliferation resistant to assure that the civilian nuclear energy system is an unattractive and least desirable route for diversion of weapon usable material. The First step developing a more proliferation resistant nuclear energy system is to develop a systematic and standardized evaluation methodology to ensure that any future nuclear energy system satisfies the proliferation resistance goals. Many attempts to develop systematic evaluation methodology have been proposed and many systems for assessing proliferation resistance have been previously studied. However, a comprehensive proliferation resistance evaluation can not be achieved by simply applying one method since complicated proliferation resistance characteristics, including inherent features and extrinsic features, should be completely evaluated. Therefore, it is necessary to develop one incorporated evaluation methodology to make up for weak points of each evaluation method. The objective of this study is to provide a framework of comprehensive proliferation resistance evaluation methodology by incorporating two generally used evaluation methods, attribute and scenario analysis

  3. Methodology for quantitative evaluation of diagnostic performance

    International Nuclear Information System (INIS)

    Metz, C.

    1981-01-01

    Of various approaches that might be taken to the diagnostic performance evaluation problem, Receiver Operating Characteristic (ROC) analysis holds great promise. Further development of the methodology for a unified, objective, and meaningful approach to evaluating the usefulness of medical imaging procedures is done by consideration of statistical significance testing, optimal sequencing of correlated studies, and analysis of observer performance

  4. Methodology for evaluation of industrial CHP production

    International Nuclear Information System (INIS)

    Pavlovic, Nenad V.; Studovic, Milovan

    2000-01-01

    At the end of the century industry switched from exclusive power consumer into power consumer-producer which is one of the players on the deregulated power market. Consequently, goals of industrial plant optimization have to be changed, making new challenges that industrial management has to be faced with. In the paper is reviewed own methodology for evaluation of industrial power production on deregulated power market. The methodology recognizes economic efficiency of industrial CHP facilities as a main criterion for evaluation. Energy and ecological efficiency are used as additional criteria, in which implicit could be found social goals. Also, methodology recognizes key and limit factors for CHP production in industry. It could be successful applied, by use of available commercial software for energy simulation in CHP plants and economic evaluation. (Authors)

  5. Review and evaluation of paleohydrologic methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Foley, M.G.; Zimmerman, D.A.; Doesburg, J.M.; Thorne, P.D.

    1982-12-01

    A literature review was conducted to identify methodologies that could be used to interpret paleohydrologic environments. Paleohydrology is the study of past hydrologic systems or of the past behavior of an existing hydrologic system. The purpose of the review was to evaluate how well these methodologies could be applied to the siting of low-level radioactive waste facilities. The computer literature search queried five bibliographical data bases containing over five million citations of technical journals, books, conference papers, and reports. Two data-base searches (United States Geological Survey - USGS) and a manual search were also conducted. The methodologies were examined for data requirements and sensitivity limits. Paleohydrologic interpretations are uncertain because of the effects of time on hydrologic and geologic systems and because of the complexity of fluvial systems. Paleoflow determinations appear in many cases to be order-of-magnitude estimates. However, the methodologies identified in this report mitigate this uncertainty when used collectively as well as independently. That is, the data from individual methodologies can be compared or combined to corroborate hydrologic predictions. In this manner, paleohydrologic methodologies are viable tools to assist in evaluating the likely future hydrology of low-level radioactive waste sites.

  6. Review and evaluation of paleohydrologic methodologies

    International Nuclear Information System (INIS)

    Foley, M.G.; Zimmerman, D.A.; Doesburg, J.M.; Thorne, P.D.

    1982-12-01

    A literature review was conducted to identify methodologies that could be used to interpret paleohydrologic environments. Paleohydrology is the study of past hydrologic systems or of the past behavior of an existing hydrologic system. The purpose of the review was to evaluate how well these methodologies could be applied to the siting of low-level radioactive waste facilities. The computer literature search queried five bibliographical data bases containing over five million citations of technical journals, books, conference papers, and reports. Two data-base searches (United States Geological Survey - USGS) and a manual search were also conducted. The methodologies were examined for data requirements and sensitivity limits. Paleohydrologic interpretations are uncertain because of the effects of time on hydrologic and geologic systems and because of the complexity of fluvial systems. Paleoflow determinations appear in many cases to be order-of-magnitude estimates. However, the methodologies identified in this report mitigate this uncertainty when used collectively as well as independently. That is, the data from individual methodologies can be compared or combined to corroborate hydrologic predictions. In this manner, paleohydrologic methodologies are viable tools to assist in evaluating the likely future hydrology of low-level radioactive waste sites

  7. Methodology for evaluation of diagnostic performance

    International Nuclear Information System (INIS)

    Metz, C.E.

    1992-01-01

    Effort in this project during the past year has focused on the development, refinement, and distribution of computer software that will allow current Receiver Operating Characteristic (ROC) methodology to be used conveniently and reliably by investigators in a variety of evaluation tasks in diagnostic medicine; and on the development of new ROC methodology that will broaden the spectrum of evaluation tasks and/or experimental settings to which the fundamental approach can be applied. Progress has been limited by the amount of financial support made available to the project

  8. Demonstration of an infiltration evaluation methodology

    International Nuclear Information System (INIS)

    Smyth, J.D.; Gee, G.W.; Kincaid, C.T.; Nichols, W.M.; Bresler, E.

    1990-07-01

    An Infiltration Evaluation Methodology (IEM) was developed for the US Nuclear Regulatory Commission (NRC) by Pacific Northwest Laboratory (PNL) to provide a consistent, well formulated approach for evaluating drainage through engineered covers at low-level radioactive waste (LLW) sites. The methodology is designed to help evaluate the ability of proposed waste site covers to minimize drainage for LLW site license applications and for sites associated with the Uranium Mill Tailings Remedial Action (UMTRA) program. The objective of this methodology is to estimate the drainage through an engineered burial site cover system. The drainage estimate can be used as an input to a broader performance assessment methodology currently under development by the NRC. The methodology is designed to simulate, at the field scale, significant factors and hydrologic conditions which determine or influence estimates of infiltration, long-term moisture content profiles, and drainage from engineered covers and barriers. The IEM developed under this study acknowledges the uncertainty inherent in soil properties and quantifies the influence of such uncertainty on the estimates of drainage in engineered cover systems at waste disposal sites. 6 refs., 1 fig

  9. Gamma ray auto absorption correction evaluation methodology

    International Nuclear Information System (INIS)

    Gugiu, Daniela; Roth, Csaba; Ghinescu, Alecse

    2010-01-01

    Neutron activation analysis (NAA) is a well established nuclear technique, suited to investigate the microstructural or elemental composition and can be applied to studies of a large variety of samples. The work with large samples involves, beside the development of large irradiation devices with well know neutron field characteristics, the knowledge of perturbing phenomena and adequate evaluation of correction factors like: neutron self shielding, extended source correction, gamma ray auto absorption. The objective of the works presented in this paper is to validate an appropriate methodology for gamma ray auto absorption correction evaluation for large inhomogeneous samples. For this purpose a benchmark experiment has been defined - a simple gamma ray transmission experiment, easy to be reproduced. The gamma ray attenuation in pottery samples has been measured and computed using MCNP5 code. The results show a good agreement between the computed and measured values, proving that the proposed methodology is able to evaluate the correction factors. (authors)

  10. Risk-based Regulatory Evaluation Program methodology

    International Nuclear Information System (INIS)

    DuCharme, A.R.; Sanders, G.A.; Carlson, D.D.; Asselin, S.V.

    1987-01-01

    The objectives of this DOE-supported Regulatory Evaluation Progrwam are to analyze and evaluate the safety importance and economic significance of existing regulatory guidance in order to assist in the improvement of the regulatory process for current generation and future design reactors. A risk-based cost-benefit methodology was developed to evaluate the safety benefit and cost of specific regulations or Standard Review Plan sections. Risk-based methods can be used in lieu of or in combination with deterministic methods in developing regulatory requirements and reaching regulatory decisions

  11. Common methodological flaws in economic evaluations.

    Science.gov (United States)

    Drummond, Michael; Sculpher, Mark

    2005-07-01

    Economic evaluations are increasingly being used by those bodies such as government agencies and managed care groups that make decisions about the reimbursement of health technologies. However, several reviews of economic evaluations point to numerous deficiencies in the methodology of studies or the failure to follow published methodological guidelines. This article, written for healthcare decision-makers and other users of economic evaluations, outlines the common methodological flaws in studies, focussing on those issues that are likely to be most important when deciding on the reimbursement, or guidance for use, of health technologies. The main flaws discussed are: (i) omission of important costs or benefits; (ii) inappropriate selection of alternatives for comparison; (iii) problems in making indirect comparisons; (iv) inadequate representation of the effectiveness data; (v) inappropriate extrapolation beyond the period observed in clinical studies; (vi) excessive use of assumptions rather than data; (vii) inadequate characterization of uncertainty; (viii) problems in aggregation of results; (ix) reporting of average cost-effectiveness ratios; (x) lack of consideration of generalizability issues; and (xi) selective reporting of findings. In each case examples are given from the literature and guidance is offered on how to detect flaws in economic evaluations.

  12. Methodologies for evaluation of AECB regulatory program

    International Nuclear Information System (INIS)

    Yarranton, G.A.; Gray, B.J.; Yarranton, M.

    1986-05-01

    AECB (Atomic Energy Control Board) commissioned this report to obtain information about methods of planning and conducting evaluation of its regulatory program. The report begins with a bibliography consisting of 280 abstracts assembled from an extensive search of international literature. Each cited publication describes or uses methods applicable to the evaluation of regulatory programs. The report continues with a review of the methodologies found in the literature. It identifies the most relevant references for each step in program evaluation: the commissioning of evaluation; the identification of evaluation issues; the defining of questions; the answering of questions; the reporting of reslts, and the implementation of recommendations. Finally, the report examines the applicability, advantages and disadvantages of the different evaluation methods and makes recommendations about the selection of methods and their application to the AECB program

  13. The Evaluation Methodology of Information Support

    Directory of Open Access Journals (Sweden)

    Lubos Necesal

    2016-01-01

    Full Text Available Knowledge, information and people are the motive force in today's organizations. Successful organizations need to find the right employees and provide them with the right and highquality information. This is a complex problem. In the world where information plays more and more important role, employees have to be skilled at information activities (searching, processing, saving, etc. of information and information system/-s (IS they work with. Organizations have to cover both these areas. Therefore, we need an effective instrument, which could be used to evaluate new employees within admission or as regular evaluating of current employees, to evaluate information system, whether it is an appropriate tool for fulfilling the employee’s tasks within the organization, and to evaluate how the organization covers the foregoing areas. Such instrument is the “Evaluation methodology of information support in organization”. This paper defines the term “information support“ and its role in organization. The body of the paper proposes the “Evaluation methodology of information support in organization”. The conclusion discusses contributions of information support evaluation

  14. Development and application of KEPRI realistic evaluation methodology (KREM) for LB-LOCA

    International Nuclear Information System (INIS)

    Ban, Chang-Hwan; Lee, Sang-Yong; Sung, Chang-Kyung

    2004-01-01

    A realistic evaluation method for LB-LOCA of a PWR, KREM, is developed and its applicability is confirmed to a 3-loop Westinghouse plant in Korea. The method uses a combined code of CONTEMPT4/MOD5 and a modified RELAP5/MOD3.1. RELAP5 code calculates system thermal hydraulics with the containment backpressure calculated by CONTEMPT4, exchanging the mass/energy release and backpressure in every time step of RELAP5. The method is developed strictly following the philosophy of CSAU with a few improvements and differences. Elements and steps of KREM are shown in Figure this paper. Three elements of CSAU are maintained and the first element has no differences. An additional step of 'Check of Experimental Data Covering (EDC)' is embedded in element 2 in order to confirm the validity of code uncertainty parameters before applying them to plant calculations. The main idea to develop the EDC is to extrapolate the code accuracy which is determined in step 8 to the uncertainties of plant calculations. EDC is described in detail elsewhere and the basic concepts are explained in the later section of this paper. KREM adopts nonparametric statistics to quantify the overall uncertainty of a LB-LOCA at 95% probability and 95% confidence level from 59 plant calculations according to Wilks formula. These 59 calculations are performed in step 12 using code parameters determined in steps 8 and 9 and operation parameters from step 11. Scale biases are also evaluated in this step using the information of step 10. Uncertainties of code models and operation conditions are reflected in 59 plant calculations as multipliers to relevant parameters in the code or as input values simply. This paper gives the explanation on the overall structures of KREM and emphasizes its unique features. In addition, its applicability is confirmed to a 3-loop plant in Korea. KREM is developed for the realistic evaluation of LB-LOCA and its applicability is successfully demonstrated for the 3-loop power plants in

  15. Unification of the methodology of competitiveness evaluation

    Directory of Open Access Journals (Sweden)

    Ivanova Marina

    2016-05-01

    Full Text Available The purpose of the study is the comparison of the modern methods of competitiveness evaluation and testing the results in practice at a production plant in order to unify the methodology. Analysis of the publications shows that the existing diversity in methods of the competitiveness evaluation complicates the choice of a method and interpretation of the results, which confirms the need to classify and unify the methods available today. The authors suggest that the standardized method of competitiveness evaluation should combine matrix and graphical methods. In our study, we have shown that SWOT-analysis should be carried out in two stages: firstly, it is necessary to determine the strengths and weaknesses of the company, taking into account the following factors: marketing, production, economic and financial situation, technology, the administration and personnel; secondly, it is essential to assess the opportunities and threats with the allowance for the political, legal, and economic situation, the impact of market as well as social, cultural and natural environmental factors. The proposed methodology of competitiveness evaluation has been tested at the industrial enterprise "Olvita ltd", which is dynamically developing and successfully operates on the food market of Ukraine; it specializes in processing, logistics and distribution of fresh and frozen vegetables, fruits and berries, as well as ready-to cook meat products. The results have shown that the competitiveness evaluation remains a pressing issue that requires simple and fairly demonstrative methods, one of which is a method that combines both graphical and matrix approaches. The advantage of the proposed method is its sufficiently high visualizations and record of personal approaches in evaluating the scores for strengths and weaknesses as well as opportunities and threats. In the future, the authors are planning to examine and systemize the indicators used in the competitiveness

  16. Towards a Public Sector GIS Evaluation Methodology | Kurwakumire ...

    African Journals Online (AJOL)

    Towards a Public Sector GIS Evaluation Methodology. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES ... However, evaluation methodologies for public sector GIS are largely lacking.

  17. Development and application of a deterministic-realistic hybrid methodology for LOCA licensing analysis

    International Nuclear Information System (INIS)

    Liang, Thomas K.S.; Chou, Ling-Yao; Zhang, Zhongwei; Hsueh, Hsiang-Yu; Lee, Min

    2011-01-01

    Highlights: → A new LOCA licensing methodology (DRHM, deterministic-realistic hybrid methodology) was developed. → DRHM involves conservative Appendix K physical models and statistical treatment of plant status uncertainties. → DRHM can generate 50-100 K PCT margin as compared to a traditional Appendix K methodology. - Abstract: It is well recognized that a realistic LOCA analysis with uncertainty quantification can generate greater safety margin as compared with classical conservative LOCA analysis using Appendix K evaluation models. The associated margin can be more than 200 K. To quantify uncertainty in BELOCA analysis, generally there are two kinds of uncertainties required to be identified and quantified, which involve model uncertainties and plant status uncertainties. Particularly, it will take huge effort to systematically quantify individual model uncertainty of a best estimate LOCA code, such as RELAP5 and TRAC. Instead of applying a full ranged BELOCA methodology to cover both model and plant status uncertainties, a deterministic-realistic hybrid methodology (DRHM) was developed to support LOCA licensing analysis. Regarding the DRHM methodology, Appendix K deterministic evaluation models are adopted to ensure model conservatism, while CSAU methodology is applied to quantify the effect of plant status uncertainty on PCT calculation. Generally, DRHM methodology can generate about 80-100 K margin on PCT as compared to Appendix K bounding state LOCA analysis.

  18. Econometric Methodology of Monopolization Process Evaluation

    Directory of Open Access Journals (Sweden)

    Dmitrijs Skoruks

    2014-06-01

    Full Text Available The research “Econometric Methodology of Monopolization Process Evaluation” gives a perspective description of monopolization process’ nature, occurrence source, development procedure and internal conjuncture specifics, as well as providing an example of modern econometrical method application within a unified framework of market competition analysis for the purpose of conducting a quantitative competition evaluation on an industry level for practical use in both private and public sectors. The main question of the aforementioned research is the definition and quantitative analysis of monopolization effects in modern day globalized markets, while con- structing an empirical model of the econometric analysis, based on the use of in- ternational historical experience of monopoly formations standings, with the goal of introducing a further development scheme for the use of both econometrical and statistical instruments in line with the forecasting and business research need of enterprises and regulatory functions of the public sector. The current research uses a vast variety of monopolization evaluation ratios and their econometrical updates on companies that are involved in the study procedure in order to detect and scallar measure their market monopolizing potential, based on the implemented acquired market positions, turnover shares and competition policies.

  19. Application and licensing requirements of the Framatome ANP RLBLOCA methodology

    International Nuclear Information System (INIS)

    Martin, R.P.; Dunn, B.M.

    2004-01-01

    The Framatome ANP Realistic Large-Break LOCA methodology (FANP RLBLOCA) is an analysis approach approved by the US NRC for supporting the licensing basis of 3- and 4-loop Westinghouse PWRs and CE 2x4 PWRs. It was developed consistent with the NRC's Code Scaling, Applicability, and Uncertainty (CSAU) methodology for performing best-estimate large-break LOCAs. The CSAU methodology consists of three key elements with the second and third element addressing uncertainty identification and application. Unique to the CSAU methodology is the use of engineering judgment and the Process Identification and Ranking Table (PIRT) defined in the first element to lay the groundwork for achieving the ultimate goal of quantifying the total uncertainty in predicted measures of interest associated with the large-break LOCA. It is the PIRT that not only directs the methodology development, but also directs the methodology review. While the FANP RLBLOCA methodology was generically approved, a plant-specific application is customized in two ways addressing how the unique plant characterization 1) is translated to code input and 2) relates to the unique methodology licensing requirements. Related to the former, plants are required by 10 CFR 50.36 to define a technical specification limiting condition for operation based on the following criteria: 1. Installed instrumentation that is used in the control room to detect, and indicate, a significant abnormal degradation of the reactor coolant pressure boundary. 2. A process variable, design feature, or operating restriction that is an initial condition of a design basis accident or transient analysis that either assumes the failure of or presents a challenge to the integrity of a fission product barrier. 3. A structure, system, or component that is part of the primary success path and which functions or actuates to mitigate a design basis accident or transient that either assumes the failure of or presents a challenge to the integrity of a

  20. Evaluation methodologies for security testing biometric systems beyond technological evaluation

    OpenAIRE

    Fernández Saavedra, María Belén

    2013-01-01

    The main objective of this PhD Thesis is the specification of formal evaluation methodologies for testing the security level achieved by biometric systems when these are working under specific contour conditions. This analysis is conducted through the calculation of the basic technical biometric system performance and its possible variations. To that end, the next two relevant contributions have been developed. The first contribution is the definition of two independent biometric performance ...

  1. Methodology for evaluation of railroad technology research projects

    Science.gov (United States)

    1981-04-01

    This Project memorandum presents a methodology for evaluating railroad research projects. The methodology includes consideration of industry and societal benefits, with special attention given to technical risks, implementation considerations, and po...

  2. EVALUATION OF THE GRAI INTEGRATED METHODOLOGY AND THE IMAGIM SUPPORTWARE

    Directory of Open Access Journals (Sweden)

    J.M.C. Reid

    2012-01-01

    Full Text Available This paper describes the GRAI Integrated Methodology and identifies the need for computer tools to support enterprise modelling,design and integration. The IMAGIM tool is then evaluated in terms of its ability to support the GRAI Integrated Methodology. The GRAI Integrated Methodology is an Enterprise Integration methodology developed to support the design of CIM systems . The GRAI Integrated Methodology consists of the GRAI model and a structured approach. The latest addition to the methodology is the IMAGIM software tool developed by the GRAI research group for the specific purpose of supporting the methodology.

  3. Overview of seismic re-evaluation methodologies

    International Nuclear Information System (INIS)

    Campbell, R.D.; Johnson, J.J.

    1993-01-01

    Several seismic licensing and safety issues have emerged over the past fifteen years for commercial U.S. Nuclear Power Plants and U.S. Government research reactors, production reactors and process facilities. The methodologies for resolution of these issues have been developed in numerous government and utility sponsored research programs. The resolution criteria have included conservative deterministic design criteria, deterministic seismic margins assessments criteria (SMA) and seismic probabilistic safety assessment criteria (SPSA). The criteria for SMAs and SPSAs have been based on realistically considering the inelastic energy absorption capability of ductile structures, equipment and piping and have incorporated the use of earthquake and testing experience to evaluate the operability of complex mechanical and electrical equipment. Most of the applications to date have been confined to the U.S. but there have been several applications to Asian, Western and Eastern Europe reactors. This paper summarizes the major issues addressed, the development of reevaluation criteria and selected applications to non U.S. reactors including WWER reactors. (author)

  4. A methodology for spectral wave model evaluation

    Science.gov (United States)

    Siqueira, S. A.; Edwards, K. L.; Rogers, W. E.

    2017-12-01

    Model evaluation is accomplished by comparing bulk parameters (e.g., significant wave height, energy period, and mean square slope (MSS)) calculated from the model energy spectra with those calculated from buoy energy spectra. Quality control of the observed data and choice of the frequency range from which the bulk parameters are calculated are critical steps in ensuring the validity of the model-data comparison. The compared frequency range of each observation and the analogous model output must be identical, and the optimal frequency range depends in part on the reliability of the observed spectra. National Data Buoy Center 3-m discus buoy spectra are unreliable above 0.3 Hz due to a non-optimal buoy response function correction. As such, the upper end of the spectrum should not be included when comparing a model to these data. Bioufouling of Waverider buoys must be detected, as it can harm the hydrodynamic response of the buoy at high frequencies, thereby rendering the upper part of the spectrum unsuitable for comparison. An important consideration is that the intentional exclusion of high frequency energy from a validation due to data quality concerns (above) can have major implications for validation exercises, especially for parameters such as the third and fourth moments of the spectrum (related to Stokes drift and MSS, respectively); final conclusions can be strongly altered. We demonstrate this by comparing outcomes with and without the exclusion, in a case where a Waverider buoy is believed to be free of biofouling. Determination of the appropriate frequency range is not limited to the observed spectra. Model evaluation involves considering whether all relevant frequencies are included. Guidance to make this decision is based on analysis of observed spectra. Two model frequency lower limits were considered. Energy in the observed spectrum below the model lower limit was calculated for each. For locations where long swell is a component of the wave

  5. Evaluation and assessment of nuclear power plant seismic methodology

    Energy Technology Data Exchange (ETDEWEB)

    Bernreuter, D.; Tokarz, F.; Wight, L.; Smith, P.; Wells, J.; Barlow, R.

    1977-03-01

    The major emphasis of this study is to develop a methodology that can be used to assess the current methods used for assuring the seismic safety of nuclear power plants. The proposed methodology makes use of system-analysis techniques and Monte Carlo schemes. Also, in this study, we evaluate previous assessments of the current seismic-design methodology.

  6. Evaluation and assessment of nuclear power plant seismic methodology

    International Nuclear Information System (INIS)

    Bernreuter, D.; Tokarz, F.; Wight, L.; Smith, P.; Wells, J.; Barlow, R.

    1977-01-01

    The major emphasis of this study is to develop a methodology that can be used to assess the current methods used for assuring the seismic safety of nuclear power plants. The proposed methodology makes use of system-analysis techniques and Monte Carlo schemes. Also, in this study, we evaluate previous assessments of the current seismic-design methodology

  7. Methodology of evaluation of value created in the productive processes

    OpenAIRE

    M.T. Roszak

    2008-01-01

    Purpose: Of this paper was to present the methodology of analysis of the productive processes with applicationof value analysis and multi-criterion-analysis which allow to evaluate the technology and organization of theproductive processes.Design/methodology/approach: Presented in the paper methodology of evaluation of the productive processesis based on analysis of activities in the productive processes and their characteristics with reference to createdvalue in the productive chain.Findings...

  8. Stress Optical Coefficient, Test Methodology, and Glass Standard Evaluation

    Science.gov (United States)

    2016-05-01

    ARL-TN-0756 ● MAY 2016 US Army Research Laboratory Stress Optical Coefficient, Test Methodology , and Glass Standard Evaluation...Stress Optical Coefficient, Test Methodology , and Glass Standard Evaluation by Clayton M Weiss Oak Ridge Institute for Science and Education...ORISE), Belcamp, MD Parimal J Patel Weapons and Materials Research Directorate, ARL Approved for public release; distribution is

  9. Evaluation Methodologies for Estimating the Likelihood of Program Implementation Failure

    Science.gov (United States)

    Durand, Roger; Decker, Phillip J.; Kirkman, Dorothy M.

    2014-01-01

    Despite our best efforts as evaluators, program implementation failures abound. A wide variety of valuable methodologies have been adopted to explain and evaluate the "why" of these failures. Yet, typically these methodologies have been employed concurrently (e.g., project monitoring) or to the post-hoc assessment of program activities.…

  10. An Evaluation Methodology for Protocol Analysis Systems

    Science.gov (United States)

    2007-03-01

    Main Memory Requirement NS: Needham-Schroeder NSL: Needham-Schroeder-Lowe OCaml : Objective Caml POSIX: Portable Operating System...methodology is needed. A. PROTOCOL ANALYSIS FIELD As with any field, there is a specialized language used within the protocol analysis community. Figure...ProVerif requires that Objective Caml ( OCaml ) be installed on the system, OCaml version 3.09.3 was installed. C. WINDOWS CONFIGURATION OS

  11. Creating and evaluating a new clicker methodology

    Science.gov (United States)

    Li, Pengfei

    "Clickers", an in-class polling system, has been used by many instructors to add active learning and formative assessment to previously passive traditional lectures. While considerable research has been conducted on clicker increasing student interaction in class, less research has been reported on the effectiveness of using clicker to help students understand concepts. This thesis reported a systemic project by the OSU Physics Education group to develop and test a new clicker methodology. Clickers question sequences based on a constructivist model of learning were used to improve classroom dynamics and student learning. They also helped students and lecturers understand in real time whether a concept had been assimilated or more effort was required. Chapter 1 provided an introduction to the clicker project. Chapter 2 summarized widely-accepted teaching principles that have arisen from a long history of research and practice in psychology, cognitive science and physics education. The OSU clicker methodology described in this thesis originated partly from our years of teaching experience, but mostly was based on these teaching principles. Chapter 3 provided an overview of the history of clicker technology and different types of clickers. Also, OSU's use of clickers was summarized together with a list of common problems and corresponding solutions. These technical details may be useful for those who want to use clickers. Chapter 4 discussed examples of the type and use of question sequences based on the new clicker methodology. In several years of research, we developed a base of clicker materials for calculus-based introductory physics courses at OSU. As discussed in chapter 5, a year-long controlled quantitative study was conducted to determine whether using clickers helps students learn, how using clickers helps students learn and whether students perceive that clicker has a positive effect on their own learning process. The strategy for this test was based on

  12. Research methodological issues in evaluating herbal interventions

    Directory of Open Access Journals (Sweden)

    Dipika Bansal

    2010-02-01

    Full Text Available Dipika Bansal, Debasish Hota, Amitava ChakrabartiPostgraduate Institute of Medical Education and Research, Chandigarh, IndiaAbstract: Randomized controlled trials provide the best evidence, and is seen as the gold standard for allopathic research. Herbal therapies are not an integral part of conventional care although they are still used by patients in their health care management. These medicines need to be subjected to rigorous research to establish their effectiveness and safety. Clearly defined treatments are required and should be recorded in a manner that enables other suitably trained researchers to reproduce them reliably. Quality control of herbal products is also a prerequisite of credible clinical trials. Methodological strategies for investigating the herbal interventions and the issues regarding appropriate patient selection, randomization and blinding, placebo effects and choice of comparator, occupational standardization and the selection of appropriate study endpoints to prove efficacy are being discussed. This paper will review research options and propose some suggestions for future research design.Keywords: CAM research, herbal therapies, methodology, clinical trial

  13. Evaluation of proliferation resistance using the INPRO methodology

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Park, Joo Hwan; Ko, Won Il; Song, Kee Chan; Choi, Kun Mo; Kim, Jin Kyoung

    2007-01-01

    The IAEA launched the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) and developed the INPRO Methodology to provide guidelines and to assess the characteristics of a future innovative nuclear energy system in areas such as safety, economics, waste management, and proliferation resistance. The proliferation resistance area of the INPRO Methodology is reviewed here, and modifications for further improvements are proposed. The evaluation metrics including the evaluation parameters, evaluation scales and acceptance limits are developed for a practical application of the methodology to assess the proliferation resistance. The proliferation resistant characteristics of the DUPIC fuel cycle are assessed by applying the modified INPRO Methodology based on the developed evaluation metrics and acceptance criteria. The evaluation procedure and the metrics can be utilized as a reference for an evaluation of the proliferation resistance of a future innovative nuclear energy system

  14. The large break LOCA evaluation method with the simplified statistic approach

    International Nuclear Information System (INIS)

    Kamata, Shinya; Kubo, Kazuo

    2004-01-01

    USNRC published the Code Scaling, Applicability and Uncertainty (CSAU) evaluation methodology to large break LOCA which supported the revised rule for Emergency Core Cooling System performance in 1989. In USNRC regulatory guide 1.157, it is required that the peak cladding temperature (PCT) cannot exceed 2200deg F with high probability 95th percentile. In recent years, overseas countries have developed statistical methodology and best estimate code with the model which can provide more realistic simulation for the phenomena based on the CSAU evaluation methodology. In order to calculate PCT probability distribution by Monte Carlo trials, there are approaches such as the response surface technique using polynomials, the order statistics method, etc. For the purpose of performing rational statistic analysis, Mitsubishi Heavy Industries, LTD (MHI) tried to develop the statistic LOCA method using the best estimate LOCA code MCOBRA/TRAC and the simplified code HOTSPOT. HOTSPOT is a Monte Carlo heat conduction solver to evaluate the uncertainties of the significant fuel parameters at the PCT positions of the hot rod. The direct uncertainty sensitivity studies can be performed without the response surface because the Monte Carlo simulation for key parameters can be performed in short time using HOTSPOT. With regard to the parameter uncertainties, MHI established the treatment that the bounding conditions are given for LOCA boundary and plant initial conditions, the Monte Carlo simulation using HOTSPOT is applied to the significant fuel parameters. The paper describes the large break LOCA evaluation method with the simplified statistic approach and the results of the application of the method to the representative four-loop nuclear power plant. (author)

  15. Safeguards Automated Facility Evaluation (SAFE) methodology

    International Nuclear Information System (INIS)

    Chapman, L.D.; Grady, L.M.; Bennett, H.A.; Sasser, D.W.; Engi, D.

    1978-08-01

    An automated approach to facility safeguards effectiveness evaluation has been developed. This automated process, called Safeguards Automated Facility Evaluation (SAFE), consists of a collection of a continuous stream of operational modules for facility characterization, the selection of critical paths, and the evaluation of safeguards effectiveness along these paths. The technique has been implemented on an interactive computer time-sharing system and makes use of computer graphics for the processing and presentation of information. Using this technique, a comprehensive evaluation of a safeguards system can be provided by systematically varying the parameters that characterize the physical protection components of a facility to reflect the perceived adversary attributes and strategy, environmental conditions, and site operational conditions. The SAFE procedure has broad applications in the nuclear facility safeguards field as well as in the security field in general. Any fixed facility containing valuable materials or components to be protected from theft or sabotage could be analyzed using this same automated evaluation technique

  16. Safeguards Automated Facility Evaluation (SAFE) methodology

    International Nuclear Information System (INIS)

    Chapman, L.D.; Grady, L.M.; Bennett, H.A.; Sasser, D.W.; Engi, D.

    1978-01-01

    The SAFE procedure is an efficient method of evaluating the physical protection system of a nuclear facility. Since the algorithms used in SAFE for path generation and evaluation are analytical, many paths can be evaluated with a modest investment in computer time. SAFE is easy to use because the information required is well-defined and the interactive nature of this procedure lends itself to straightforward operation. The modular approach that has been taken allows other functionally equivalent modules to be substituted as they become available. The SAFE procedure has broad applications in the nuclear facility safeguards field as well as in the security field in general. Any fixed facility containing valuable materials or components to be protected from theft or sabotage could be analyzed using this same automated evaluation technique

  17. Evaluation methodology for generator refurbishment decisions

    International Nuclear Information System (INIS)

    Moore, W.G.; Ulm, S.F.

    1991-01-01

    The Electrical Power Industry is undergoing tremendous change due to deregulation, aging equipment, environmental concerns, and investment/risk considerations. Public utility commissions, along with shareholders and end consumers, are closely monitoring utilities; decisions, especially in the area of costs-both Operation and Maintenance, and Capital. Increasing emphasis, within the conventional utility environment, has been and continue to be, placed on controlling expenditures. To be responsive to these industry and competitive pressures, utilities must make equipment refurbishment decisions. These decisions should be based on input from many sources, including the severity of the failure, cost of replacement versus refurbishment, risks and safety considerations, the expected remaining life of the unit, operational mode (base or peak), fuel type, initial costs, system capacity, available budgets, and financing options. Many times, however, refurbishment decisions are base don an abstract understanding of the above, but feel, or emotional attachment to a particular option. This paper describes a general methodology for refurbishment decision making, applied specifically to generators. Also included in a case history of one utility's progression through this process

  18. Fault-tolerant architecture: Evaluation methodology

    International Nuclear Information System (INIS)

    Battle, R.E.; Kisner, R.A.

    1992-08-01

    The design and reliability of four fault-tolerant architectures that may be used in nuclear power plant control systems were evaluated. Two architectures are variations of triple-modular-redundant (TMR) systems, and two are variations of dual redundant systems. The evaluation includes a review of methods of implementing fault-tolerant control, the importance of automatic recovery from failures, methods of self-testing diagnostics, block diagrams of typical fault-tolerant controllers, review of fault-tolerant controllers operating in nuclear power plants, and fault tree reliability analyses of fault-tolerant systems

  19. An economic analysis methodology for project evaluation and programming.

    Science.gov (United States)

    2013-08-01

    Economic analysis is a critical component of a comprehensive project or program evaluation methodology that considers all key : quantitative and qualitative impacts of highway investments. It allows highway agencies to identify, quantify, and value t...

  20. Present stage evaluation of Furnas calculus methodology qualification

    International Nuclear Information System (INIS)

    1987-07-01

    This technical note is about the present stage evaluation of FURNAS Calculus Methodology Qualification related to reload licensing process and licensing support of operation questions of Angra 1 NPP concerning transient and Core ThermalHydraulic areas. (Author) [pt

  1. Methodology for Evaluating Encapsulated Beneficial Uses of Coal Combustion Residuals

    Science.gov (United States)

    The primary purpose of this document is to present an evaluation methodology developed by the EPA for making determinations about environmental releases from encapsulated products containing coal combustion residuals.

  2. Interviewing: Methodological Briefs - Impact Evaluation No. 12

    OpenAIRE

    Bronwen McDonald; Patricia Rogers

    2014-01-01

    Interviews are easy to do badly and hard to do well - good planning, adequate time and appropriate skills are required. The type of interview should be carefully chosen to suit the situation rather than choosing a type of interview (such as focus groups) simply because it is commonly used. Interviews with children raise particular ethical issues that need to be carefully considered and fully addressed. This brief outlines key issues to consider in planning interviews for impact evaluation, ta...

  3. Empirical evaluation and justification of methodologies in psychological science.

    Science.gov (United States)

    Proctor, R W; Capaldi, E J

    2001-11-01

    The purpose of this article is to describe a relatively new movement in the history and philosophy of science, naturalism, a form of pragmatism emphasizing that methodological principles are empirical statements. Thus, methodological principles must be evaluated and justified on the same basis as other empirical statements. On this view, methodological statements may be less secure than the specific scientific theories to which they give rise. The authors examined the feasibility of a naturalistic approach to methodology using logical and historical analysis and by contrasting theories that predict new facts versus theories that explain already known facts. They provide examples of how differences over methodological issues in psychology and in science generally may be resolved using a naturalistic, or empirical, approach.

  4. Physical protection evaluation methodology program development and application

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Janghoon; Yoo, Hosik [Korea Institute of Nuclear Non-proliferation and Control, Daejeon (Korea, Republic of)

    2015-10-15

    It is essential to develop a reliable physical protection evaluation methodology for applying physical protection concept to the design stage. The methodology can be used to assess weak points and improve performance not only for the design stage but also for nuclear facilities in operation. Analyzing physical protection property of nuclear facilities is not a trivial work since there are many interconnected factors affecting overall performance. Therefore several international projects have been organized to develop a systematic physical protection evaluation methodology. INPRO (The International Project on Innovative Nuclear Reactors and Fuel Cycles) and GIF PRPP (Generation IV International Forum Proliferation Resistance and Physical Protection) methodology are among the most well-known evaluation methodologies. INPRO adopts a checklist type of questionnaire and has a strong point in analyzing overall characteristic of facilities in a qualitative way. COMPRE program has been developed to help general users apply COMPRE methodology to nuclear facilities. In this work, COMPRE program development and a case study of the hypothetical nuclear facility are presented. The development of COMPRE program and a case study for hypothetic facility is presented in this work. The case study shows that COMPRE PP methodology can be a useful tool to assess the overall physical protection performance of nuclear facilities. To obtain meaningful results from COMPRE PP methodology, detailed information and comprehensive analysis are required. Especially, it is not trivial to calculate reliable values for PPSE (Physical Protection System Effectiveness) and C (Consequence), while it is relatively straightforward to evaluate LI (Legislative and Institutional framework), MC (Material Control) and HR (Human Resources). To obtain a reliable PPSE value, comprehensive information about physical protection system, vital area analysis and realistic threat scenario assessment are required. Like

  5. Physical protection evaluation methodology program development and application

    International Nuclear Information System (INIS)

    Seo, Janghoon; Yoo, Hosik

    2015-01-01

    It is essential to develop a reliable physical protection evaluation methodology for applying physical protection concept to the design stage. The methodology can be used to assess weak points and improve performance not only for the design stage but also for nuclear facilities in operation. Analyzing physical protection property of nuclear facilities is not a trivial work since there are many interconnected factors affecting overall performance. Therefore several international projects have been organized to develop a systematic physical protection evaluation methodology. INPRO (The International Project on Innovative Nuclear Reactors and Fuel Cycles) and GIF PRPP (Generation IV International Forum Proliferation Resistance and Physical Protection) methodology are among the most well-known evaluation methodologies. INPRO adopts a checklist type of questionnaire and has a strong point in analyzing overall characteristic of facilities in a qualitative way. COMPRE program has been developed to help general users apply COMPRE methodology to nuclear facilities. In this work, COMPRE program development and a case study of the hypothetical nuclear facility are presented. The development of COMPRE program and a case study for hypothetic facility is presented in this work. The case study shows that COMPRE PP methodology can be a useful tool to assess the overall physical protection performance of nuclear facilities. To obtain meaningful results from COMPRE PP methodology, detailed information and comprehensive analysis are required. Especially, it is not trivial to calculate reliable values for PPSE (Physical Protection System Effectiveness) and C (Consequence), while it is relatively straightforward to evaluate LI (Legislative and Institutional framework), MC (Material Control) and HR (Human Resources). To obtain a reliable PPSE value, comprehensive information about physical protection system, vital area analysis and realistic threat scenario assessment are required. Like

  6. Economic evaluation in stratified medicine: methodological issues and challenges

    Directory of Open Access Journals (Sweden)

    Hans-Joerg eFugel

    2016-05-01

    Full Text Available Background: Stratified Medicine (SM is becoming a practical reality with the targeting of medicines by using a biomarker or genetic-based diagnostic to identify the eligible patient sub-population. Like any healthcare intervention, SM interventions have costs and consequences that must be considered by reimbursement authorities with limited resources. Methodological standards and guidelines exist for economic evaluations in clinical pharmacology and are an important component for health technology assessments (HTAs in many countries. However, these guidelines have initially been developed for traditional pharmaceuticals and not for complex interventions with multiple components. This raises the issue as to whether these guidelines are adequate to SM interventions or whether new specific guidance and methodology is needed to avoid inconsistencies and contradictory findings when assessing economic value in SM.Objective: This article describes specific methodological challenges when conducting health economic (HE evaluations for SM interventions and outlines potential modifications necessary to existing evaluation guidelines /principles that would promote consistent economic evaluations for SM.Results/Conclusions: Specific methodological aspects for SM comprise considerations on the choice of comparator, measuring effectiveness and outcomes, appropriate modelling structure and the scope of sensitivity analyses. Although current HE methodology can be applied for SM, greater complexity requires further methodology development and modifications in the guidelines.

  7. Evaluation of safeguards procedures: a summary of a methodology

    International Nuclear Information System (INIS)

    Salisbury, J.D.; Savage, J.W.

    1979-01-01

    A methodology for the evaluation of safeguards procedures is described. As presently conceptualized, the methodology will consist of the following steps: (1) expansion of the general protection requirements that are contained in the NRC regulations into more detailed but still generic requirements for use at the working level; (2) development of techniques and formats for using the working-level requirements in an evaluation; (3) development of a technique for converting specific facility protection procedures into a format that will allow comparison with the working-level requirements; (4) development of an evaluation technique for comparing the facility protection procedures to determine if they meet the protection requirements

  8. Methodology of investment effectiveness evaluation in the local energy market

    Energy Technology Data Exchange (ETDEWEB)

    Kamrat, W.

    1999-07-01

    The paper presents issues of investment effectiveness evaluation in the local energy market. Results of research presented in the paper are mainly proposing a concept of a methodology which allows the evaluation of investment processes in regional power markets at the decision-making stage. In this respect, selecting a rational investment strategy is an important stage of the entire investment process. In view of criteria of various nature, the construction of a methodology of investment effectiveness bears an especially important meaning for a local decision-maker or investor. It is of particular significance to countries that are undergoing a transition from a centrally planned economy to a market economy. (orig.)

  9. A review on the CIRCE methodology to quantify the uncertainty of the physical models of a code

    International Nuclear Information System (INIS)

    Jeon, Seong Su; Hong, Soon Joon; Bang, Young Seok

    2012-01-01

    In the field of nuclear engineering, recent regulatory audit calculations of large break loss of coolant accident (LBLOCA) have been performed with the best estimate code such as MARS, RELAP5 and CATHARE. Since the credible regulatory audit calculation is very important in the evaluation of the safety of the nuclear power plant (NPP), there have been many researches to develop rules and methodologies for the use of best estimate codes. One of the major points is to develop the best estimate plus uncertainty (BEPU) method for uncertainty analysis. As a representative BEPU method, NRC proposes the CSAU (Code scaling, applicability and uncertainty) methodology, which clearly identifies the different steps necessary for an uncertainty analysis. The general idea is 1) to determine all the sources of uncertainty in the code, also called basic uncertainties, 2) quantify them and 3) combine them in order to obtain the final uncertainty for the studied application. Using the uncertainty analysis such as CSAU methodology, an uncertainty band for the code response (calculation result), important from the safety point of view is calculated and the safety margin of the NPP is quantified. An example of such a response is the peak cladding temperature (PCT) for a LBLOCA. However, there is a problem in the uncertainty analysis with the best estimate codes. Generally, it is very difficult to determine the uncertainties due to the empiricism of closure laws (also called correlations or constitutive relationships). So far the only proposed approach is based on the expert judgment. For this case, the uncertainty range of important parameters can be wide and inaccurate so that the confidence level of the BEPU calculation results can be decreased. In order to solve this problem, recently CEA (France) proposes a statistical method of data analysis, called CIRCE. The CIRCE method is intended to quantify the uncertainties of the correlations of a code. It may replace the expert judgment

  10. Evaluation Methodology. The Evaluation Exchange. Volume 11, Number 2, Summer 2005

    Science.gov (United States)

    Coffman, Julia, Ed.

    2005-01-01

    This is the third issue of "The Evaluation Exchange" devoted entirely to the theme of methodology, though every issue tries to identify new methodological choices, the instructive ways in which people have applied or combined different methods, and emerging methodological trends. For example, lately "theories of change" have gained almost…

  11. Safety analysis and evaluation methodology for fusion systems

    International Nuclear Information System (INIS)

    Fujii-e, Y.; Kozawa, Y.; Namba, C.

    1987-03-01

    Fusion systems which are under development as future energy systems have reached a stage that the break even is expected to be realized in the near future. It is desirable to demonstrate that fusion systems are well acceptable to the societal environment. There are three crucial viewpoints to measure the acceptability, that is, technological feasibility, economy and safety. These three points have close interrelation. The safety problem is more important since three large scale tokamaks, JET, TFTR and JT-60, start experiment, and tritium will be introduced into some of them as the fusion fuel. It is desirable to establish a methodology to resolve the safety-related issues in harmony with the technological evolution. The promising fusion system toward reactors is not yet settled. This study has the objective to develop and adequate methodology which promotes the safety design of general fusion systems and to present a basis for proposing the R and D themes and establishing the data base. A framework of the methodology, the understanding and modeling of fusion systems, the principle of ensuring safety, the safety analysis based on the function and the application of the methodology are discussed. As the result of this study, the methodology for the safety analysis and evaluation of fusion systems was developed. New idea and approach were presented in the course of the methodology development. (Kako, I.)

  12. A Theoretical and Methodological Evaluation of Leadership Research.

    Science.gov (United States)

    Lashbrook, Velma J.; Lashbrook, William B.

    This paper isolates some of the strengths and weaknesses of leadership research by evaluating it from both a theoretical and methodological perspective. The seven theories or approaches examined are: great man, trait, situational, style, functional, social influence, and interaction positions. General theoretical, conceptual, and measurement…

  13. Guidelines for reporting evaluations based on observational methodology.

    Science.gov (United States)

    Portell, Mariona; Anguera, M Teresa; Chacón-Moscoso, Salvador; Sanduvete-Chaves, Susana

    2015-01-01

    Observational methodology is one of the most suitable research designs for evaluating fidelity of implementation, especially in complex interventions. However, the conduct and reporting of observational studies is hampered by the absence of specific guidelines, such as those that exist for other evaluation designs. This lack of specific guidance poses a threat to the quality and transparency of these studies and also constitutes a considerable publication hurdle. The aim of this study thus was to draw up a set of proposed guidelines for reporting evaluations based on observational methodology. The guidelines were developed by triangulating three sources of information: observational studies performed in different fields by experts in observational methodology, reporting guidelines for general studies and studies with similar designs to observational studies, and proposals from experts in observational methodology at scientific meetings. We produced a list of guidelines grouped into three domains: intervention and expected outcomes, methods, and results. The result is a useful, carefully crafted set of simple guidelines for conducting and reporting observational studies in the field of program evaluation.

  14. A multiple feedback methodology for the study of creativity evaluations

    DEFF Research Database (Denmark)

    Glaveanu, Vlad Petre

    2012-01-01

    The cultural psychology perspective emphasizes the role of communication and social interaction in the construction of representations and evaluations concerning creativity. In terms of creativity assessment, this approach leads to the use of a multiple feedback methodology selecting several groups...... useful for investigating the social and cultural dynamics of creativity....

  15. Evaluation and testing methodology for evolving entertainment systems

    NARCIS (Netherlands)

    Jurgelionis, A.; Bellotti, F.; IJsselsteijn, W.A.; Kort, de Y.A.W.; Bernhaupt, R.; Tscheligi, M.

    2007-01-01

    This paper presents a testing and evaluation methodology for evolving pervasive gaming and multimedia systems. We introduce the Games@Large system, a complex gaming and multimedia architecture comprised of a multitude of elements: heterogeneous end user devices, wireless and wired network

  16. Evaluation of methodologies for remunerating wind power's reliability in Colombia

    International Nuclear Information System (INIS)

    Botero B, Sergio; Isaza C, Felipe; Valencia, Adriana

    2010-01-01

    Colombia strives to have enough firm capacity available to meet unexpected power shortages and peak demand; this is clear from mechanisms currently in place that provide monetary incentives (in the order of nearly US$ 14/MW h) to power producers that can guarantee electricity provision during scarcity periods. Yet, wind power in Colombia is not able to currently guarantee firm power because an accepted methodology to calculate its potential firm capacity does not exist. In this paper we argue that developing such methodology would provide an incentive to potential investors to enter into this low carbon technology. This paper analyzes three methodologies currently used in energy markets around the world to calculate firm wind energy capacity: PJM, NYISO, and Spain. These methodologies are initially selected due to their ability to accommodate to the Colombian energy regulations. The objective of this work is to determine which of these methodologies makes most sense from an investor's perspective, to ultimately shed light into developing a methodology to be used in Colombia. To this end, the authors developed a methodology consisting on the elaboration of a wind model using the Monte-Carlo simulation, based on known wind behaviour statistics of a region with adequate wind potential in Colombia. The simulation gives back random generation data, representing the resource's inherent variability and simulating the historical data required to evaluate the mentioned methodologies, thus achieving the technology's theoretical generation data. The document concludes that the evaluated methodologies are easy to implement and that these do not require historical data (important for Colombia, where there is almost no historical wind power data). It is also found that the Spanish methodology provides a higher Capacity Value (and therefore a higher return to investors). The financial assessment results show that it is crucial that these types of incentives exist to make viable

  17. Development of Testing Methodologies to Evaluate Postflight Locomotor Performance

    Science.gov (United States)

    Mulavara, A. P.; Peters, B. T.; Cohen, H. S.; Richards, J. T.; Miller, C. A.; Brady, R.; Warren, L. E.; Bloomberg, J. J.

    2006-01-01

    Crewmembers experience locomotor and postural instabilities during ambulation on Earth following their return from space flight. Gait training programs designed to facilitate recovery of locomotor function following a transition to a gravitational environment need to be accompanied by relevant assessment methodologies to evaluate their efficacy. The goal of this paper is to demonstrate the operational validity of two tests of locomotor function that were used to evaluate performance after long duration space flight missions on the International Space Station (ISS).

  18. Performance evaluation methodology for historical document image binarization.

    Science.gov (United States)

    Ntirogiannis, Konstantinos; Gatos, Basilis; Pratikakis, Ioannis

    2013-02-01

    Document image binarization is of great importance in the document image analysis and recognition pipeline since it affects further stages of the recognition process. The evaluation of a binarization method aids in studying its algorithmic behavior, as well as verifying its effectiveness, by providing qualitative and quantitative indication of its performance. This paper addresses a pixel-based binarization evaluation methodology for historical handwritten/machine-printed document images. In the proposed evaluation scheme, the recall and precision evaluation measures are properly modified using a weighting scheme that diminishes any potential evaluation bias. Additional performance metrics of the proposed evaluation scheme consist of the percentage rates of broken and missed text, false alarms, background noise, character enlargement, and merging. Several experiments conducted in comparison with other pixel-based evaluation measures demonstrate the validity of the proposed evaluation scheme.

  19. Status of Methodology Development for the Evaluation of Proliferation Resistance

    International Nuclear Information System (INIS)

    Lee, Yong Deok; Ko, Won Il; Lee, Jung Won

    2010-01-01

    Concerning the increasing energy demand and green house effect, nuclear energy is now the most feasible option. Therefore, recently, oil countries even have a plan to build the nuclear power plant for energy production. If nuclear systems are to make a major and sustainable contribution to the worlds energy supply, future nuclear energy systems must meet specific requirements. One of the requirements is to satisfy the proliferation resistance condition in an entire nuclear system. Therefore, from the beginning of future nuclear energy system development, it is important to consider a proliferation resistance to prevent the diversion of nuclear materials. The misuse of a nuclear system must be considered as well. Moreover, in the import and export of nuclear system, the evaluation of the proliferation resistance on the nuclear system becomes a key factor The INPRO (International Project on Innovative Nuclear Reactors and Fuel Cycles) program initiated by the IAEA proposed proliferation resistance (PR) as a key component of a future innovative nuclear system (INS) with a sustainability, economics, safety of nuclear installation and waste management. The technical goal for Generation IV (Gen IV) nuclear energy systems (NESs) highlights a Proliferation Resistance and Physical Protection (PR and PP), sustainability, safety, reliability and economics as well. Based on INPRO and Gen IV study, the methodology development for the evaluation of proliferation resistance has been carried out in KAERI. Finally, the systematic procedure for methodology was setup and the indicators for the procedure were decided. The methodology involves the evaluation from total nuclear system to individual process. Therefore, in this study, the detailed procedure for the evaluation of proliferation resistance and the newly proposed additional indicators are described and several conditions are proposed to increase the proliferation resistance in the future nuclear system. The assessment of PR

  20. Evaluation methodology for fixed-site physical protection systems

    International Nuclear Information System (INIS)

    Bennett, H.A.; Olascoaga, M.T.

    1980-01-01

    A system performance evaluation methodology has been developed to aid the Nuclear Regulatory Commission (NRC) in the implementation of new regulations designed to upgrade the physical protection of nuclear fuel cycle facilities. The evaluation methodology, called Safeguards Upgrade Rule Evaluation (SURE), provides a means of explicitly incorporating measures for highly important and often difficult to quantify performance factors, e.g., installation, maintenance, training and proficiency levels, compatibility of components in subsystems, etc. This is achieved by aggregating responses to component and system questionaires through successive levels of a functional hierarchy developed for each primary performance capability specified in the regulations, 10 CFR 73.45. An overall measure of performance for each capability is the result of this aggregation process. This paper provides a descripton of SURE

  1. Methodology For Evaluation Of Regulatory Effectiveness In Physical Protection

    International Nuclear Information System (INIS)

    Izmaylov, Alexander; Valente, John; Griggs, James R.; Rexroth, Paul; Piskarev, Alexander; Babkin, Vladimir; Sokolov, Egor; Melton, Ronald B.; Cunningham, Mitchel E.; Baker, Kathryn A.; Brothers, Alan J.

    2005-01-01

    Material protection, control, and accounting (MPC and A) regulatory documents play an important role in securing and protecting nuclear material by regulating a variety of activities at different hierarchical levels. The development, implementation, and practical application of these regulatory documents requires a significant investment of financial and material resources. Therefore, it is important to evaluate the effectiveness of the regulatory development process and the extent to which regulations improve the effectiveness of MPC and A at nuclear sites. The joint Russian and U.S. Regulatory Development Project has a goal of evaluating the effectiveness of regulatory documents developed for MPC and A. As part of this joint Project, a methodology for evaluating effectiveness has been developed. This methodology was developed around physical protection objectives. The developed methodology specifies physical protection objectives to be accomplished through the implementation of a regulatory system based on the physical protection goals at the nuclear sites. It includes approaches to assessing regulatory effectiveness, the hierarchical structure of physical protection objectives to be accomplished through implementing regulations, a 'mapping' of the physical protection objectives to the regulatory framework, a list of criteria for evaluating the effectiveness of physical protection regulations and effectiveness indicators, as well as means and methods for gathering information and implementation of this evaluation.

  2. A new methodology for repository site suitability evaluation

    International Nuclear Information System (INIS)

    Miller, I.; Kossik, R.; Cunnane, M.

    1992-01-01

    Golder Associates Inc. (GAI) has developed a probabilistic total system performance assessment and strategy evaluation model (RIP) which can be applied in an iterative manner to evaluate repository site suitability and guide site characterization. The major portion of the software is the performance assessment model, which consists of a series of coupled component models for radionuclide transfer. The performance model itself is embedded within a decision analysis model which allows the user to evaluate alternative site characterization strategies. This paper provides an overview of the methodology, and summarizes the basic concepts of RIP

  3. A progressive methodology for seismic safety evaluation of gravity dams

    International Nuclear Information System (INIS)

    Ghrib, F.; Leger, P.; Tinawi, R.; Lupien, R.; Veilleux, M.

    1995-01-01

    A progressive methodology for the seismic safety evaluation of existing concrete gravity dams was described. The methodology was based on five structural analysis levels with increasing complexity to represent inertia forces, dam-foundation and dam-interaction mechanisms, as well as concrete cracking. The five levels were (1) preliminary screening, (2) pseudo-static method, (3) pseudo-dynamic method, (4) linear time history analysis, and (5) non-linear history analysis. The first four levels of analysis were applied for the seismic safety evaluation of Paugan gravity dam (Quebec). Results showed that internal forces from pseudo-dynamic, response spectra and transient finite element analyses could be used to interpret the dynamic stability of dams from familiar strength-based criteria. However, as soon as the base was cracked, the seismically induced forces were modified, and level IV analyses proved more suitable to handle rationally these complexities. 8 refs., 7 figs., 1 tab

  4. Development of a comprehensive management site evaluation methodology

    International Nuclear Information System (INIS)

    Rodgers, J.C.; Onishi, Y.

    1981-01-01

    The Nuclear Regulatory Commission is in the process of preparing regulations that will define the necessary conditions for adequate disposal of low-level waste (LLW) by confinement in an LLW disposal facility. These proposed regulations form the context in which the motivation for the joint Los Alamos National Laboratory Battelle Pacific Northwest Laboratory program to develop a site-specific, LLW site evaluation methodology is discussed. The overall effort is divided into three development areas: land-use evaluation, environmental transport modelling, and long term scenario development including long-range climatology projections. At the present time four steps are envisioned in the application of the methodology to a site: site land use suitability assessment, land use-ecosystem interaction, contaminant transport simulation, and sensitivity analysis. Each of these steps is discussed in the paper. 12 refs

  5. METHODOLOGICAL PRINCIPLES AND METHODS OF TERMS OF TRADE STATISTICAL EVALUATION

    Directory of Open Access Journals (Sweden)

    N. Kovtun

    2014-09-01

    Full Text Available The paper studies the methodological principles and guidance of the statistical evaluation of terms of trade for the United Nations classification model – Harmonized Commodity Description and Coding System (HS. The practical implementation of the proposed three-stage model of index analysis and estimation of terms of trade for Ukraine's commodity-members for the period of 2011-2012 are realized.

  6. Evaluation of analytical performance based on partial order methodology.

    Science.gov (United States)

    Carlsen, Lars; Bruggemann, Rainer; Kenessova, Olga; Erzhigitov, Erkin

    2015-01-01

    Classical measurements of performances are typically based on linear scales. However, in analytical chemistry a simple scale may be not sufficient to analyze the analytical performance appropriately. Here partial order methodology can be helpful. Within the context described here, partial order analysis can be seen as an ordinal analysis of data matrices, especially to simplify the relative comparisons of objects due to their data profile (the ordered set of values an object have). Hence, partial order methodology offers a unique possibility to evaluate analytical performance. In the present data as, e.g., provided by the laboratories through interlaboratory comparisons or proficiency testings is used as an illustrative example. However, the presented scheme is likewise applicable for comparison of analytical methods or simply as a tool for optimization of an analytical method. The methodology can be applied without presumptions or pretreatment of the analytical data provided in order to evaluate the analytical performance taking into account all indicators simultaneously and thus elucidating a "distance" from the true value. In the present illustrative example it is assumed that the laboratories analyze a given sample several times and subsequently report the mean value, the standard deviation and the skewness, which simultaneously are used for the evaluation of the analytical performance. The analyses lead to information concerning (1) a partial ordering of the laboratories, subsequently, (2) a "distance" to the Reference laboratory and (3) a classification due to the concept of "peculiar points". Copyright © 2014 Elsevier B.V. All rights reserved.

  7. INPRO Methodology to evaluate the Mexico nuclear energy system

    International Nuclear Information System (INIS)

    Cruz S, R. R.; Martin del C, C.

    2016-09-01

    The International Atomic Energy Agency has developed the so-called International Project on Fuel Cycles and Innovative Nuclear Reactors (INPRO), in order to make nuclear energy available to meet the energy needs of the 21 century, in a sustainable way. One of the tasks of the project is the evaluation of the nuclear systems, to check whether they meet the objectives of the project and whether they are sustainable. This paper explains the rationale and general characteristics of the project in the evaluation of nuclear energy systems based on the concept of sustainable development. It describes the methodology developed to carry out this evaluation, divided into seven areas, such as economic, environmental, security, etc., which together make up the sustainable development of energy through nuclear systems. The economic area is analyzed and the evaluation criteria and parameters established by INPRO are discussed, in order to evaluate the Mexican nuclear energy system using Nest (software developed within the same project) as a tool to support the economic evaluation of nuclear systems. Based on the energy strategy proposed by the Energy Secretary of the Mexican Government which seeks to reduce the greenhouse gas emissions from the national electricity generation park, two types of reactor of currently available technology (A BWR and AP1000), were compared and these in turn with other alternative energy generation technologies, such as combined cycle, geothermal and wind plants. Also, the results of the application of the INPRO methodology are presented. Finally, the recommendations on actions that could lead the Mexican nuclear energy system towards sustainable development and conclusions on the application of the methodology to the Mexican case are mentioned. (Author)

  8. Methodology to evaluate the insecticide potential of forest tree species

    International Nuclear Information System (INIS)

    Morales Soto, Leon; Garcia P, Carlos Mario

    2000-01-01

    The flora diversity of Colombia has an enormous potential in the rational use of its forest resources. Trees with biocidal effects to control pests and diseases need to be investigated. The objective of this research was to develop a methodology with low costs, easy application and quick results. The methodology employed was as follows: selection of tree species based on bibliography, ancestral reports and personal observations. The process was as follows: field collection of plants, preparation of plants extracts and test with Artemia salina Leach to detect biological activity of the extracts using LC50. Bioassays with those extract more promising (LC50 less than 1000 ppm) Determination of active compounds. The methodology was employed with 5 forest tree species: guarea guidonia (L) Sleumer and trichia hirta L. (Meliaceae), Machaerium Moritzianum Benth. (Fabaceae), Swinglea glutinosa Merrill (rutaceae) and Mammea americana L. (Clusiaceae). Using Artemia salina Leach as indicator of biocidal potential, two species were selected as the most promising, those were: Swinglea glutinosa Merril and Machaerium moritzianum Benth. In addition bioassays were made to evaluate fagoinhibition on Atta cephalotes (L.) (Hym: Formicidae) and control of Alconeura. This methodology is recommended for this kind of research

  9. Methodology for the insecticide potential evaluation of forest species

    International Nuclear Information System (INIS)

    Morales Soto, Leon; Garcia P, Carlos Mario

    2000-01-01

    The flora diversity of Colombia has an enormous potential in the rational use of its forest resources. Trees with biocides effects to pest control and diseases need to be investigated. The objective of this research was to develop a methodology with low costs, easy application and quick results. The methodology employed was as follows: selection of tree species based on bibliography, ancestral reports and personal observations. The process was as follows: field collection of plants, preparation of plants extracts, and test with Artemia Salina, leach to detect biological activity of the extracts using LC50. Bioassays with those extract more promising (LC50 less than 1000 ppm). The methodology was employed with 5 forest tree species: Guarea guidonia (L.) Sleumer and Trichia hirta L. (Meliaceae), machaerium moritzianum Benth. (Fabaceae), Swinglea glutinosa Merrill. (Rutaceae) and Mammea americana L. (Clusiaceae). Using Artemia salina Leach as indicator of biocidal potential, two species were selected as the most promising, those were: Swinglea glutinosa Merril and Machaerium moritzianum Benth. In addition bioassays were made to evaluate fagoinhibition on Atta cephalotes (L.) and control of Alconeura. This methodology is recommended for this kind of research

  10. Model evaluation methodology applicable to environmental assessment models

    International Nuclear Information System (INIS)

    Shaeffer, D.L.

    1979-08-01

    A model evaluation methodology is presented to provide a systematic framework within which the adequacy of environmental assessment models might be examined. The necessity for such a tool is motivated by the widespread use of models for predicting the environmental consequences of various human activities and by the reliance on these model predictions for deciding whether a particular activity requires the deployment of costly control measures. Consequently, the uncertainty associated with prediction must be established for the use of such models. The methodology presented here consists of six major tasks: model examination, algorithm examination, data evaluation, sensitivity analyses, validation studies, and code comparison. This methodology is presented in the form of a flowchart to show the logical interrelatedness of the various tasks. Emphasis has been placed on identifying those parameters which are most important in determining the predictive outputs of a model. Importance has been attached to the process of collecting quality data. A method has been developed for analyzing multiplicative chain models when the input parameters are statistically independent and lognormally distributed. Latin hypercube sampling has been offered as a promising candidate for doing sensitivity analyses. Several different ways of viewing the validity of a model have been presented. Criteria are presented for selecting models for environmental assessment purposes

  11. A methodology to evaluate the fatigue life of flexible pipes

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Fernando J.M. de; Sousa, Jose Renato M. de; Siqueira, Marcos Q. de; Sagrilo, Luis V.S. [Coordenacao dos Programas de Pos-graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil); Lemos, Carlos Alberto D. de [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    This paper focus on a methodology to perform the fatigue analysis of flexible pipes. This methodology employs functions that convert forces and moments obtained in global analyses into stresses. The stresses are then processed by well-known cycle counting methods, and S-N curves evaluate the damage at several points in the pipe cross-section. Palmgren-Miner linear damage hypothesis is assumed in order to calculate the accumulated fatigue damage. A parametric study on the fatigue life of a flexible pipe employing this methodology is presented. The main points addressed in the study are the influence of friction between layers in the results, the importance of evaluating the fatigue life in various points of the pipe cross-section and the effect of different mean stress levels. The obtained results suggest that the consideration of friction effects strongly influences the fatigue life of flexible risers and these effects have to be accounted both in the global and local analyses of the riser. Moreover, mean stress effects are also significant and at least 8 equally spaced wires in each analyzed section of the riser must be considered in fatigue analyses. (author)

  12. Study on GIF PR/PP evaluation methodology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, B. H.; Kwon, E. H.; Kim, H. D. [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    Proliferation resistance (PR) and physical protection (PP) is one of the four technology goals of generation IV nuclear energy systems (NESs). The PR component of the goal focuses on providing strong assurance that generation IV NESs are the least desirable sources for the diversion or undeclared production of nuclear materials, whereas the PP portion of the goal ensures that generation IV NESs are robust against theft and sabotage. In 2002, the road map of the Generation IV International Forum (GIF) envisioned that the R and D program for PR and PP would have three areas: 1) safeguards and physical protection technology R and D for each GIF system; 2) formulation of PR and PP criteria and metrics; and 3) evaluation of the criteria and metrics. To cover these R and D items, the PR and PP Working Group (PRPPWG) was formed in late 2002 and has since developed a methodology for PR and PP evaluation. In a succession of revisions beginning in 2004, consensus was achieved amongst all participating GIF countries and related organizations (i.e., IAEA and EU), and Revision 6 of the methodology report was approved by GIF for open distribution in 2011. The paper describes in detail the methodology developed by the PRPPWG and discusses its applicability to the sodium-cooled fast reactor (SFR) fuel cycle with pyro processing currently under development in Korea.

  13. Methodologies for evaluating the proliferation resistance of nuclear fuel cycles

    International Nuclear Information System (INIS)

    Shiotani, Hiroki; Hori, Kei-ichiro; Takeda, Hiroshi

    2001-01-01

    The Japan Nuclear Cycle Development Institute (JNC) believes that the development of future nuclear fuel cycle technology should be conducted with careful consideration given to non-proliferation. JNC is studying methodologies for evaluating proliferation resistance of nuclear fuel cycle technologies. However, it is difficult to establish the methodology for evaluating proliferation resistance since the results greatly depend on the assumption for the evaluation and the surrounding conditions. This study grouped factors of proliferation resistance into categories through reviewing past studies and studied the relationships between the factors. Then, this study tried to find vulnerable nuclear material (plutonium) in some FBR fuel cycles from the proliferation perspective, and calculated the time it takes to convert the materials from various nuclear fuel cycles into pure plutonium metal under some assumptions. The result showed that it would take a long time to convert the nuclear materials from the FBR fuel cycles without plutonium separation. While it is a preliminary attempt to evaluate a technical factor of proliferation resistance as the basis of the institutional proliferation resistance, the JNC hopes that it will contribute to future discussions in this area. (author)

  14. Methodology for evaluating port vulnerability to nuclear smuggling

    International Nuclear Information System (INIS)

    Ek, D.; Gronager, J.R.; Blankenship, J.A.; Martin, D.

    2001-01-01

    Full text: Background: Fueled by an increase in intercepted nuclear smuggling events, the threat of nuclear smuggling has received increased attention in recent years. This attention has resulted in a focused effort to improve the ability to deter or detect smuggling attempts through border crossings, including seaports, airports, and rail and road crossings. These efforts have primarily been focused on installing SNM detectors across vehicle and pedestrian gates entering these ports. However, the effectiveness of this application in deterring or detecting events has not been carefully evaluated. A recent effort was undertaken to evaluate in detail the susceptibility of an international seaport and airport to nuclear smuggling. The evaluation considered a range of adversary profiles to match these against existing and proposed port security measures and equipment. The evaluation was pursued using path analysis methodologies, which were adapted to the port environment. As a result of limited data concerning the effectiveness of patrol, search, and access control procedures at the port, an assessment methodology was developed to estimate these in a standardized fashion. The methodology considers a detailed list of tasks each type of adversary must successfully accomplish for any particular smuggling scenario and path through the port. Within these tasks, locations or times of potential detection are identified. From a look-up table, a detection level (Low, Medium, or High) is assigned to each detection potential based upon the type of detection possible and considering the possible access or authority of each adversary. The overall detection potential in determined as a sum of these individual detection potentials according to the equation: P t ={1-Σ(1-P n ). Where: P t is the total detection potential for an adversary path, and P n is the individual detection at a particular location or time. The evaluation revealed that the current process of installing portals at

  15. Reservoir shorelines : a methodology for evaluating operational impacts

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, M.; Braund-Read, J.; Musgrave, B. [BC Hydro, Burnaby, BC (Canada)

    2009-07-01

    BC Hydro has been operating hydroelectric facilities for over a century in British Columbia. The integrity and stability of the shorelines and slopes bordering hydroelectric reservoirs is affected by changing water levels in the reservoir, natural processes of flooding, wind and wave action and modification of groundwater levels. Establishing setbacks landward of the shoreline are needed in order to protect useable shoreline property that may be at risk of flooding, erosion or instability due to reservoir operations. Many of the reservoirs in British Columbia are situated in steep, glaciated valleys with diverse geological, geomorphological and climatic conditions and a variety of eroding shorelines. As such, geotechnical studies are needed to determine the operational impacts on reservoir shorelines. Since the 1960s BC Hydro has been developing a methodology for evaluating reservoir impacts and determining the land around the reservoir perimeter that should remain as a right of way for operations while safeguarding waterfront development. The methodology was modified in the 1990s to include geomorphological and geological processes. However, uncertainties in the methodology still exist due to limited understanding of key issues such as rates of erosion and shoreline regression, immaturity of present day reservoir shorelines and impacts of climate change. 11 refs., 1 tab., 7 figs.

  16. The evaluation framework for business process management methodologies

    Directory of Open Access Journals (Sweden)

    Sebastian Lahajnar

    2016-06-01

    Full Text Available In an intense competition in the global market, organisations seek to take advantage of all their internal and external potentials, advantages, and resources. It has been found that, in addition to competitive products and services, a good business also requires an effective management of business processes, which is the discipline of the business process management (BPM. The introduction of the BPM in the organisation requires a thoughtful selection of an appropriate methodological approach, since the latter will formalize activities, products, applications and other efforts of the organisation in this field. Despite many technology-driven solutions of software companies, recommendations of consulting companies, techniques, good practices and tools, the decision on what methodology to choose is anything but simple. The aim of this article is to simplify the adoption of such decisions by building a framework for the evaluation of BPM methodologies according to a qualitative multi-attribute decision-making method. The framework defines a hierarchical decision-making model, formalizes the decision-making process and thus contributes significantly to an independent, credible final decision that is the most appropriate for a specific organisation.

  17. A bench-scale biotreatability methodology to evaluate field bioremediation

    International Nuclear Information System (INIS)

    Saberiyan, A.G.; MacPherson, J.R. Jr.; Moore, R.; Pruess, A.J.; Andrilenas, J.S.

    1995-01-01

    A bench-scale biotreatability methodology was designed to assess field bioremediation of petroleum contaminated soil samples. This methodology was performed successfully on soil samples from more than 40 sites. The methodology is composed of two phases, characterization and experimentation. The first phase is physical, chemical, and biological characterization of the contaminated soil sample. This phase determines soil parameters, contaminant type, presence of indigenous contaminant-degrading bacteria, and bacterial population size. The second phase, experimentation, consists of a respirometry test to measure the growth of microbes indirectly (via generation of CO 2 ) and the consumption of their food source directly (via contaminant loss). Based on a Monod kinetic analysis, the half-life of a contaminant can be calculated. Abiotic losses are accounted for based on a control test. The contaminant molecular structure is used to generate a stoichiometric equation. The stoichiometric equation yields a theoretical ratio for mg of contaminant degraded per mg of CO 2 produced. Data collected from the respirometry test are compared to theoretical values to evaluate bioremediation feasibility

  18. European Healthy Cities evaluation: conceptual framework and methodology.

    Science.gov (United States)

    de Leeuw, Evelyne; Green, Geoff; Dyakova, Mariana; Spanswick, Lucy; Palmer, Nicola

    2015-06-01

    This paper presents the methodology, programme logic and conceptual framework that drove the evaluation of the Fifth Phase of the WHO European Healthy Cities Network. Towards the end of the phase, 99 cities were designated progressively through the life of the phase (2009-14). The paper establishes the values, systems and aspirations that these cities sign up for, as foundations for the selection of methodology. We assert that a realist synthesis methodology, driven by a wide range of qualitative and quantitative methods, is the most appropriate perspective to address the wide geopolitical, demographic, population and health diversities of these cities. The paper outlines the rationale for a structured multiple case study approach, the deployment of a comprehensive questionnaire, data mining through existing databases including Eurostat and analysis of management information generation tools used throughout the period. Response rates were considered extremely high for this type of research. Non-response analyses are described, which show that data are representative for cities across the spectrum of diversity. This paper provides a foundation for further analysis on specific areas of interest presented in this supplement. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  19. Evaluating the Staff at Enterprise: Several Theoretical and Methodological Aspects

    Directory of Open Access Journals (Sweden)

    Girman Alla P.

    2017-03-01

    Full Text Available The article is aimed at generalizing and systematizing various knowledge, related to evaluation of staff, on a common theoretical-methodological basis. Concept, objectives, directions, methods, and indicators for evaluating staff in the contemporary economy were analyzed. The topicality of using the theoretical developments on staff evaluation in actual practice of functioning of enterprises has been substantiated. A new approach to the procedure of evaluation of the total human resource of enterprise, based on the life cycle of organization, has been proposed. On the basis of the proposed scientific algorithmic step-by-step approach to the evaluation of staff, managers of companies can design their own models for staff evaluation, develop its separate elements. Prospects for further researches in this direction involve relation of staff evaluation to the life cycle of employee no less than the life cycle of enterprise. Management of the life cycle of employee represents methods for management of his development that would change the level of the employee’s professional maturity as result of a system impact.

  20. Nuclear data evaluation methodology including estimates of covariances

    Directory of Open Access Journals (Sweden)

    Smith D.L.

    2010-10-01

    Full Text Available Evaluated nuclear data rather than raw experimental and theoretical information are employed in nuclear applications such as the design of nuclear energy systems. Therefore, the process by which such information is produced and ultimately used is of critical interest to the nuclear science community. This paper provides an overview of various contemporary methods employed to generate evaluated cross sections and related physical quantities such as particle emission angular distributions and energy spectra. The emphasis here is on data associated with neutron induced reaction processes, with consideration of the uncertainties in these data, and on the more recent evaluation methods, e.g., those that are based on stochastic (Monte Carlo techniques. There is no unique way to perform such evaluations, nor are nuclear data evaluators united in their opinions as to which methods are superior to the others in various circumstances. In some cases it is not critical which approaches are used as long as there is consistency and proper use is made of the available physical information. However, in other instances there are definite advantages to using particular methods as opposed to other options. Some of these distinctions are discussed in this paper and suggestions are offered regarding fruitful areas for future research in the development of evaluation methodology.

  1. ECSIN's methodological approach for hazard evaluation of engineered nanomaterials

    Science.gov (United States)

    Bregoli, Lisa; Benetti, Federico; Venturini, Marco; Sabbioni, Enrico

    2013-04-01

    The increasing production volumes and commercialization of engineered nanomaterials (ENM), together with data on their higher biological reactivity when compared to bulk counterpart and ability to cross biological barriers, have caused concerns about their potential impacts on the health and safety of both humans and the environment. A multidisciplinary component of the scientific community has been called to evaluate the real risks associated with the use of products containing ENM, and is today in the process of developing specific definitions and testing strategies for nanomaterials. At ECSIN we are developing an integrated multidisciplinary methodological approach for the evaluation of the biological effects of ENM on the environment and human health. While our testing strategy agrees with the most widely advanced line of work at the European level, the choice of methods and optimization of protocols is made with an extended treatment of details. Our attention to the methodological and technical details is based on the acknowledgment that the innovative characteristics of matter at the nano-size range may influence the existing testing methods in a partially unpredictable manner, an aspect which is frequently recognized at the discussion level but oftentimes disregarded at the laboratory bench level. This work outlines the most important steps of our testing approach. In particular, each step will be briefly discussed in terms of potential technical and methodological pitfalls that we have encountered, and which are often ignored in nanotoxicology research. The final aim is to draw attention to the need of preliminary studies in developing reliable tests, a crucial aspect to confirm the suitability of the chosen analytical and toxicological methods to be used for the specific tested nanoparticle, and to express the idea that in nanotoxicology,"devil is in the detail".

  2. ECSIN's methodological approach for hazard evaluation of engineered nanomaterials

    International Nuclear Information System (INIS)

    Bregoli, Lisa; Benetti, Federico; Venturini, Marco; Sabbioni, Enrico

    2013-01-01

    The increasing production volumes and commercialization of engineered nanomaterials (ENM), together with data on their higher biological reactivity when compared to bulk counterpart and ability to cross biological barriers, have caused concerns about their potential impacts on the health and safety of both humans and the environment. A multidisciplinary component of the scientific community has been called to evaluate the real risks associated with the use of products containing ENM, and is today in the process of developing specific definitions and testing strategies for nanomaterials. At ECSIN we are developing an integrated multidisciplinary methodological approach for the evaluation of the biological effects of ENM on the environment and human health. While our testing strategy agrees with the most widely advanced line of work at the European level, the choice of methods and optimization of protocols is made with an extended treatment of details. Our attention to the methodological and technical details is based on the acknowledgment that the innovative characteristics of matter at the nano-size range may influence the existing testing methods in a partially unpredictable manner, an aspect which is frequently recognized at the discussion level but oftentimes disregarded at the laboratory bench level. This work outlines the most important steps of our testing approach. In particular, each step will be briefly discussed in terms of potential technical and methodological pitfalls that we have encountered, and which are often ignored in nanotoxicology research. The final aim is to draw attention to the need of preliminary studies in developing reliable tests, a crucial aspect to confirm the suitability of the chosen analytical and toxicological methods to be used for the specific tested nanoparticle, and to express the idea that in nanotoxicology,'devil is in the detail'.

  3. Methodology for fast evaluation of Bacillus thuringiensis crystal protein content

    Directory of Open Access Journals (Sweden)

    Alves Lúcia M. Carareto

    2000-01-01

    Full Text Available The development of the production and use of Bacillus thuringiensis in Brazil at a commercial scale faces certain difficulties, among them the establishment of efficient methodologies for the quantitation of toxic products to be commercialized. Presently, the amount of toxin is given in percentage by analyzing the samples total protein content. Such methodology however, does not measure the actual amount of active protein present in the product, since most strains express different endotoxin genes and might even produce b-toxin. Since the various types of toxins exhibit different antigenic characteristics, this work has as objective the utilization of fast immunological techniques to quantify the level of crystal protein. Crystal protein produced by a subspecies of Bacillus thuringiensis var. israelensis was purified by ultracentrifugation and utilized to immunize rabbits and to produce hiperimmune sera. Such sera were latter used to evaluate the level of proteins on commercial bioinsecticide and on laboratory cultures of B. thuringiensis through the immunodot technique. The results were obtained by comparison of data obtained from reactions with known concentrations of crystal protein permitting to evaluate the level of such protein on various materials.

  4. Taipower's reload safety evaluation methodology for pressurized water reactors

    International Nuclear Information System (INIS)

    Huang, Ping-Hue; Yang, Y.S.

    1996-01-01

    For Westinghouse pressurized water reactors (PWRs) such as Taiwan Power Company's (TPC's) Maanshan Units 1 and 2, each of the safety analysis is performed with conservative reload related parameters such that reanalysis is not expected for all subsequent cycles. For each reload cycle design, it is required to perform a reload safety evaluation (RSE) to confirm the validity of the existing safety analysis for fuel cycle changes. The TPC's reload safety evaluation methodology for PWRs is based on 'Core Design and Safety Analysis Package' developed by the TPC and the Institute of Nuclear Energy Research (INER), and is an important portion of the 'Taipower's Reload Design and Transient Analysis Methodologies for Light Water Reactors'. The Core Management System (CMS) developed by Studsvik of America, the one-dimensional code AXINER developed by TPC, National Tsinghua University and INER, and a modified version of the well-known subchannel core thermal-hydraulic code COBRAIIIC are the major computer codes utilized. Each of the computer models is extensively validated by comparing with measured data and/or vendor's calculational results. Moreover, parallel calculations have been performed for two Maanshan reload cycles to validate the RSE methods. The TPC's in-house RSE tools have been applied to resolve many important plant operational issues and plant improvements, as well as to verify the vendor's fuel and core design data. (author)

  5. Strategic alternatives ranking methodology: Multiple RCRA incinerator evaluation test case

    International Nuclear Information System (INIS)

    Baker, G.; Thomson, R.D.; Reece, J.; Springer, L.; Main, D.

    1988-01-01

    This paper presents an important process approach to permit quantification and ranking of multiple alternatives being considered in remedial actions or hazardous waste strategies. This process is a methodology for evaluating programmatic options in support of site selection or environmental analyses. Political or other less tangible motivations for alternatives may be quantified by means of establishing the range of significant variables, weighting their importance, and by establishing specific criteria for scoring individual alternatives. An application of the process to a recent AFLC program permitted ranking incineration alternatives from a list of over 130 options. The process forced participation by the organizations to be effected, allowed a consensus of opinion to be achieved, allowed complete flexibility to evaluate factor sensitivity, and resulted in strong, quantifiable support for any subsequent site-selection action NEPA documents

  6. Proposal of risk evaluation methodology for hazardous materials transportation

    International Nuclear Information System (INIS)

    Hartman, Luiz Carlos

    2009-01-01

    The increasing concern with the level of risk associated with the transportation of hazardous materials took some international institutions to pledge efforts in the evaluation of risk in regional level. Following this trend, the objective of this work was to analyze the most recent processes of analysis of risks from road transportation of hazardous materials. In the present work 21 methodologies of analysis of risks, developed by some authors and for diverse localities have been evaluated. Two of them, in special, have been reviewed and discussed: a method recently developed by the Swiss Federal Institute of Technology (Nicolet-Monnier and Gheorghe, 1996) and the strategy delineated by the Center for Chemical Process Safety CCPS (1995), taking into consideration the estimate of the individual and social risk. Also, the models of Harwood et al. (1990) and of Ramos (1997), adapted by Hartman (2003) have been applied to the reality of the roads of the state of Sao Paulo. The extension of these methodologies was explored, in order to find its advantages and disadvantages. As a study case the present work considered the ammonia transportation throughout two routes evaluating the reality of the roads of the state of Sao Paulo, including a significant parcel of evaluation in a densely populated area, getting the results using risk, at least, one of the methodologies mentioned above. The innovation proposed by this work was the research, the development and the introduction of two variables to the model considered by Harwood et al. (1990). These variables that influence in the value of the risk are: the age of the driver of truck and the zone of impact that is function type of product, period of the day where the transport was carried and the volume that has been transported. The aim of the proposed modifications is to let the value of the risk more sensible in relation to the type of the product carried and the age of the truck driver. The main related procedural stages

  7. Design Methodology and Performance Evaluation of New Generation Sounding Rockets

    Directory of Open Access Journals (Sweden)

    Marco Pallone

    2018-01-01

    Full Text Available Sounding rockets are currently deployed for the purpose of providing experimental data of the upper atmosphere, as well as for microgravity experiments. This work provides a methodology in order to design, model, and evaluate the performance of new sounding rockets. A general configuration composed of a rocket with four canards and four tail wings is sized and optimized, assuming different payload masses and microgravity durations. The aerodynamic forces are modeled with high fidelity using the interpolation of available data. Three different guidance algorithms are used for the trajectory integration: constant attitude, near radial, and sun-pointing. The sun-pointing guidance is used to obtain the best microgravity performance while maintaining a specified attitude with respect to the sun, allowing for experiments which are temperature sensitive. Near radial guidance has instead the main purpose of reaching high altitudes, thus maximizing the microgravity duration. The results prove that the methodology at hand is straightforward to implement and capable of providing satisfactory performance in term of microgravity duration.

  8. A methodology for nuclear power plant operational events evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Jeferson, E-mail: jeferson@cnen.gov.br [Comissao Nacional de Energia Nuclear (CGRC/CNEN), Rio de janeiro, RJ (Brazil). Coordenacao Geral de Reatores e do Ciclo de Combustivel; Costa, Sergio Dias, E-mail: sergiodiascosta@hotmail.com [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2015-07-01

    to identify trends that might pass unnoticed. There are several methodologies for evaluation of operational events, specifically, for the determination of the causes of the event, where the concepts of root cause, direct cause and causal factors, among others. However, the most recent methodology in use in Brazil, date of 2003. The subject is so important that there is national legislation dealing with the theme, also it need of update. The actual regulations establishes criteria for notification of the occurrence of events considered significant for safety and establishes criteria and deadlines for the issuance of the report. Is also discussed the relationship between occurrence of operational events and a potential application for the life extension of the nuclear power plants, considering the regulatory focus, theme quite present in the international field. The present study intends to present a modern, appropriate methodology for evaluation of operational events, focusing on regulatory aspects and verify its applicability to nuclear power plants. Will also be presented a study of the occurrence of events, focusing on the last five years of operation. Finally will be also presented to international trends in development on this area. (author)

  9. A methodology for nuclear power plant operational events evaluation

    International Nuclear Information System (INIS)

    Araujo, Jeferson

    2015-01-01

    to identify trends that might pass unnoticed. There are several methodologies for evaluation of operational events, specifically, for the determination of the causes of the event, where the concepts of root cause, direct cause and causal factors, among others. However, the most recent methodology in use in Brazil, date of 2003. The subject is so important that there is national legislation dealing with the theme, also it need of update. The actual regulations establishes criteria for notification of the occurrence of events considered significant for safety and establishes criteria and deadlines for the issuance of the report. Is also discussed the relationship between occurrence of operational events and a potential application for the life extension of the nuclear power plants, considering the regulatory focus, theme quite present in the international field. The present study intends to present a modern, appropriate methodology for evaluation of operational events, focusing on regulatory aspects and verify its applicability to nuclear power plants. Will also be presented a study of the occurrence of events, focusing on the last five years of operation. Finally will be also presented to international trends in development on this area. (author)

  10. Methodology to evaluation of the density in radiographic image

    International Nuclear Information System (INIS)

    Louzada, M.J.Q.; Pela, C.A.; Belangero, W.D.; Santos-Pinto, R.

    1998-01-01

    This study was designed in order to optimize the optical densitometry technique in radiographic images by the setorization of the characteristic curves of the radiographic films. We used 24 radiographs of a stepped aluminium wedge that were taken without rigorous control development and manually revealed. The densitometric values of the steps images and its thickness, for each radiographic, was utilized to generate its particular mathematics expressions that represent its characteristic densitometric curves and then it were used for setorization. The densitometric values were obtained by a Macbeth TD528 densitometer. The study showed an optimization in the representation of the relationship between the optical density of the steps images of the wedge and its correspondent thickness, provided by the setorization, with mean square error around 10 -5 . This optimization will allow the use of this methodology in quantitative evaluations of bone mass, by radiographic images. (author)

  11. Development and evaluation of clicker methodology for introductory physics courses

    Science.gov (United States)

    Lee, Albert H.

    Many educators understand that lectures are cost effective but not learning efficient, so continue to search for ways to increase active student participation in this traditionally passive learning environment. In-class polling systems, or "clickers", are inexpensive and reliable tools allowing students to actively participate in lectures by answering multiple-choice questions. Students assess their learning in real time by observing instant polling summaries displayed in front of them. This in turn motivates additional discussions which increase the opportunity for active learning. We wanted to develop a comprehensive clicker methodology that creates an active lecture environment for a broad spectrum of students taking introductory physics courses. We wanted our methodology to incorporate many findings of contemporary learning science. It is recognized that learning requires active construction; students need to be actively involved in their own learning process. Learning also depends on preexisting knowledge; students construct new knowledge and understandings based on what they already know and believe. Learning is context dependent; students who have learned to apply a concept in one context may not be able to recognize and apply the same concept in a different context, even when both contexts are considered to be isomorphic by experts. On this basis, we developed question sequences, each involving the same concept but having different contexts. Answer choices are designed to address students preexisting knowledge. These sequences are used with the clickers to promote active discussions and multiple assessments. We have created, validated, and evaluated sequences sufficient in number to populate all of introductory physics courses. Our research has found that using clickers with our question sequences significantly improved student conceptual understanding. Our research has also found how to best measure student conceptual gain using research-based instruments

  12. EMCAS: An evaluation methodology for safeguards and security systems

    International Nuclear Information System (INIS)

    Eggers, R.F.; Giese, E.W.; Bichl, F.J.

    1987-01-01

    EMCAS is an evaluation methodology for safeguards and security systems. It provides a score card of projected or actual system performance for several areas of system operation. In one area, the performance of material control and accounting and security systems, which jointly defend against the insider threat to divert or steal special nuclear material (SNM) using stealth and deceit, is evaluated. Time-dependent and time-independent risk equations are used for both diversion and theft risk calculations. In the case of loss detection by material accounting, a detailed timeliness model is provided to determine the combined effects of loss detection sensitivity and timeliness on the overall effectiveness of the material accounting detection procedure. Calculated risks take into account the capabilities of process area containment/surveillance, material accounting mass balance tests, and physical protection barriers and procedures. In addition, EMCAS evaluates the Material Control and Accounting (MC and A) System in the following areas: (1) system capability to detect errors in the official book inventory of SNM, using mass balance accounting methods, (2) system capability to prevent errors from entering the nuclear material data base during periods of operation between mass balance tests, (3) time to conduct inventories and resolve alarms, and (4) time lost from production to carry out material control and accounting loss detection activities. 3 figs., 5 tabs

  13. EMCAS, an evaluation methodology for safeguards and security systems

    International Nuclear Information System (INIS)

    Eggers, R.F.; Giese, E.W.; Bichl, F.J.

    1987-01-01

    EMCAS is an evaluation methodology for safeguards and security systems. It provides a score card of projected or actual system performance for several areas of system operation. In one area, the performance of material control and accounting and security systems, which jointly defend against the insider threat to divert or steal special nuclear material (SNM) using stealth and deceit, is evaluated. Time-dependent and time-independent risk equations are used for both diversion and theft risk calculations. In the case of loss detection by material accounting, a detailed timeliness model is provided to determine the combined effects of loss detection sensitivity and timeliness on the overall effectiveness of the material accounting detection procedure. Calculated risks take into account the capabilities of process area containment/surveillance, material accounting mass balance tests, and physical protection barriers and procedures. In addition, EMCAS evaluates the Material Control and Accounting (MCandA) System in the following areas: (1) system capability to detect errors in the official book inventory of SNM, using mass balance accounting methods, (2) system capability to prevent errors from entering the nuclear material data base during periods of operation between mass balance tests, (3) time to conduct inventories and resolve alarms, and (4) time lost from production to carry out material control and accounting loss detection activities

  14. Methodology to identify, review, and evaluate components for license renewal

    International Nuclear Information System (INIS)

    Carlson, D.D.; Gregor, F.E.; Walker, R.S.

    1988-01-01

    A methodology has been developed to systematically identify, review, and evaluate plant equipment for license renewal. The method builds upon the existing licensing basis, operating history, and accepted deterministic and probabilistic techniques. Use of these approaches provides a focus for license renewal upon those safety-significant systems and components that are not routinely replaced, refurbished, or subject to detailed inspection as part of the plant's existing test, maintenance, and surveillance programs. Application of the method identified the PWR and BWR systems that should be subjected to detailed license renewal review. Detailed examination of two example systems demonstrates the approach. The review and evaluation of plant equipment for license renewal differ from the initial licensing of the plant. A substantial operating history has been established, the licensing basis has evolved from the original one, and plant equipment has been subject to periodic maintenance and surveillance throughout its life. In consideration of these differences, a basis for license renewal is needed. License renewal should be based upon continuation of the existing licensing basis and recognition of existing programs and operating history

  15. APPETITE CONTROL: METHODOLOGICAL ASPECTS OF THE EVALUATION OF FOODS

    Science.gov (United States)

    Blundell, John; de Graaf, Cees; Hulshof, Toine; Jebb, Susan; Livingstone, Barbara; Lluch, Anne; Mela, David; Salah, Samir; Schuring, Ewoud; van der Knaap, Henk; Westerterp, Margriet

    2013-01-01

    This report describes a set of scientific procedures used to assess the impact of foods and food ingredients on the expression of appetite (psychological and behavioural). An overarching priority has been to enable potential evaluators of health claims about foods to identify justified claims, and to exclude claims that are not supported by scientific evidence for the effect cited. This priority follows precisely from the principles set down in the PASSCLAIM report. (4) The report allows the evaluation of the strength of health claims, about the effects of foods on appetite, which can be sustained on the basis of the commonly used scientific designs and experimental procedures. The report includes different designs for assessing effects on satiation as opposed to satiety,detailed coverage of the extent to which a change in hunger can stand-alone as a measure of appetite control, and an extensive discussion of the statistical procedures appropriate for handling data in this field of research. Since research in this area is continually evolving, new improved methodologies may emerge over time and will need to be incorporated into the framework. One main objective of the report has been to produce guidance on good practice in carrying out appetite research, and not to set down a series of commandments that must be followed. PMID:20122136

  16. Evaluation in health: participatory methodology and involvement of municipal managers.

    Science.gov (United States)

    Almeida, Cristiane Andrea Locatelli de; Tanaka, Oswaldo Yoshimi

    2016-08-04

    To analyze scopes and limits of the use of participatory methodology of evaluation with municipal health managers and administrators. Qualitative research with health policymakers and managers of the Comissão Intergestores Regional (CIR - Regional Interagency Commission) of a health region of the state of Sao Paulo in Brazil. Representatives from seven member cities participated in seven workshops facilitated by the researchers, with the aim of assessing a specific problem of the care line, which would be used as a tracer of the system integrality. The analysis of the collected empirical material was based on the hermeneutic-dialectic methodology and aimed at the evaluation of the applied participatory methodology, according to its capacity of promoting a process of assessment capable to be used as a support for municipal management. With the participatory approach of evaluation, we were able to promote in-depth discussions with the group, especially related to the construction of integral care and to the inclusion of the user's perspective in decision-making, linked to the search for solution to concrete problems of managers. By joint exploration, the possibility of using data from electronic information systems was opened, as well as information coming directly from the users of the services, to enhance discussions and negotiations between partners. The participants were disbelievers of the replication potential of this type of evaluation without the direct monitoring of the academy, given the difficulty of organizing the process in everyday life, already taken by emergency and political issues. Evaluations of programs and services carried out within the Regional Interagency Commission, starting from the local interest and facilitating the involvement of its members by the use of participatory methodologies, can contribute to the construction of integral care. To the extent that the act of evaluating stay invested with greater significance to the local actors

  17. Evaluation methodology based on physical security assessment results: a utility theory approach

    International Nuclear Information System (INIS)

    Bennett, H.A.; Olascoaga, M.T.

    1978-03-01

    This report describes an evaluation methodology which aggregates physical security assessment results for nuclear facilities into an overall measure of adequacy. This methodology utilizes utility theory and conforms to a hierarchical structure developed by the NRC. Implementation of the methodology is illustrated by several examples. Recommendations for improvements in the evaluation process are given

  18. A Methodology for Evaluating Quantitative Nuclear Safety Culture Impact

    International Nuclear Information System (INIS)

    Han, Kiyoon; Jae, Moosung

    2015-01-01

    Through several accidents of NPPs including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, nuclear safety culture has been emphasized in reactor safety world-widely. In Korea, KHNP evaluates the safety culture of NPP itself. KHNP developed the principles of the safety culture in consideration of the international standards. A questionnaire and interview questions are also developed based on these principles and it is used for evaluating the safety culture. However, existing methodology to evaluate the safety culture has some disadvantages. First, it is difficult to maintain the consistency of the assessment. Second, the period of safety culture assessment is too long (every two years) so it has limitations in preventing accidents occurred by a lack of safety culture. Third, it is not possible to measure the change in the risk of NPPs by weak safety culture since it is not clearly explains the effect of safety culture on the safety of NPPs. In this study, Safety Culture Impact Assessment Model (SCIAM) is developed overcoming these disadvantages. In this study, SCIAM which overcoming disadvantages of exiting safety culture assessment method is developed. SCIAM uses SCII to monitor the statues of the safety culture periodically and also uses RCDF to quantify the safety culture impact on NPP's safety. It is significant that SCIAM represents the standard of the healthy nuclear safety culture, while the exiting safety culture assessment presented only vulnerability of the safety culture of organization. SCIAM might contribute to monitoring the level of safety culture periodically and, to improving the safety of NPP

  19. A Methodology for Evaluating Quantitative Nuclear Safety Culture Impact

    Energy Technology Data Exchange (ETDEWEB)

    Han, Kiyoon; Jae, Moosung [Hanyang University, Seoul (Korea, Republic of)

    2015-05-15

    Through several accidents of NPPs including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, nuclear safety culture has been emphasized in reactor safety world-widely. In Korea, KHNP evaluates the safety culture of NPP itself. KHNP developed the principles of the safety culture in consideration of the international standards. A questionnaire and interview questions are also developed based on these principles and it is used for evaluating the safety culture. However, existing methodology to evaluate the safety culture has some disadvantages. First, it is difficult to maintain the consistency of the assessment. Second, the period of safety culture assessment is too long (every two years) so it has limitations in preventing accidents occurred by a lack of safety culture. Third, it is not possible to measure the change in the risk of NPPs by weak safety culture since it is not clearly explains the effect of safety culture on the safety of NPPs. In this study, Safety Culture Impact Assessment Model (SCIAM) is developed overcoming these disadvantages. In this study, SCIAM which overcoming disadvantages of exiting safety culture assessment method is developed. SCIAM uses SCII to monitor the statues of the safety culture periodically and also uses RCDF to quantify the safety culture impact on NPP's safety. It is significant that SCIAM represents the standard of the healthy nuclear safety culture, while the exiting safety culture assessment presented only vulnerability of the safety culture of organization. SCIAM might contribute to monitoring the level of safety culture periodically and, to improving the safety of NPP.

  20. THE STUDY OF ORGANIZATIONAL CULTURE: METHODOLOGY FOR QUANTITATIVE EVALUATION AND ANALYSIS

    Directory of Open Access Journals (Sweden)

    To Thu Trang

    2014-01-01

    Full Text Available This article discusses the concept: methodof evaluation organizational culture, qualitative and quantitative assessment methodology and lists the basic methodologyfor assessing organizational culture. Fullydescribe professor Denison’s methodology for assessing organizational culture.

  1. Review of effectiveness-evaluation methodologies for safeguards and security systems

    International Nuclear Information System (INIS)

    Dowdy, E.J.; Mangan, D.L.

    1982-06-01

    We discuss the factors that influence the effectiveness of safeguards and security measures and the characteristics required of effectiveness evaluation methodologies. Within this context and from a utility standpoint, we review those effectiveness evaluation methodologies that have been developed. Our principal recommendation concerns the application and concomitant validation of existing methodologies. This recommendation derives from our conclusion that there has been a gross imbalance between the effort spent on methodology development and the application of those methodologies. Only for those safeguards measures that do not seem to be covered by existing methodologies or that seem to be inadequately covered do we suggest development. 44 references

  2. Methodology development for statistical evaluation of reactor safety analyses

    International Nuclear Information System (INIS)

    Mazumdar, M.; Marshall, J.A.; Chay, S.C.; Gay, R.

    1976-07-01

    In February 1975, Westinghouse Electric Corporation, under contract to Electric Power Research Institute, started a one-year program to develop methodology for statistical evaluation of nuclear-safety-related engineering analyses. The objectives of the program were to develop an understanding of the relative efficiencies of various computational methods which can be used to compute probability distributions of output variables due to input parameter uncertainties in analyses of design basis events for nuclear reactors and to develop methods for obtaining reasonably accurate estimates of these probability distributions at an economically feasible level. A series of tasks was set up to accomplish these objectives. Two of the tasks were to investigate the relative efficiencies and accuracies of various Monte Carlo and analytical techniques for obtaining such estimates for a simple thermal-hydraulic problem whose output variable of interest is given in a closed-form relationship of the input variables and to repeat the above study on a thermal-hydraulic problem in which the relationship between the predicted variable and the inputs is described by a short-running computer program. The purpose of the report presented is to document the results of the investigations completed under these tasks, giving the rationale for choices of techniques and problems, and to present interim conclusions

  3. Russian Сonsumer Sector: Methodology of Evaluation

    Directory of Open Access Journals (Sweden)

    Gavriil Aleksandrovich Agarkov

    2015-12-01

    Full Text Available The article describes the methodology for estimating the Russia’s consumer sector and the effect of its application. The monitoring procedure of the Russian consumer sector groups indicators into two units: the unit of the estimation of consumer goods and the services market estimation unit. The estimation unit of consumer goods is composed of two modules: food products and non-food products. This module offers two components that provide an estimation of the consumer sector: marketing (estimates the accessibility of retail trade and services for end users and production (estimates the domestic manufacture. The results of the estimation show general improvements in the consumer sector in the period of 2000–2014, but overall development is evaluated as low. The analysis revealed that the financing is growing faster than the quality indices of development. As an example, the financing of agriculture has increased by 1.5 times over 15 years (against comparable prices from 2000, while agricultural production has not changed. Another most pressing challenge is the weak differentiation of the Russian economy, as evidenced by the low rates of non-food production (availability of non-foods of own production remains at a low level and averages 20 %. The results of the estimation suggest the need to reform the regulation of the sector primarily concerning priorities for its development and improvement of financial and economic mechanisms to achieve them.

  4. A dynamic systems engineering methodology research study. Phase 2: Evaluating methodologies, tools, and techniques for applicability to NASA's systems projects

    Science.gov (United States)

    Paul, Arthur S.; Gill, Tepper L.; Maclin, Arlene P.

    1989-01-01

    A study of NASA's Systems Management Policy (SMP) concluded that the primary methodology being used by the Mission Operations and Data Systems Directorate and its subordinate, the Networks Division, is very effective. Still some unmet needs were identified. This study involved evaluating methodologies, tools, and techniques with the potential for resolving the previously identified deficiencies. Six preselected methodologies being used by other organizations with similar development problems were studied. The study revealed a wide range of significant differences in structure. Each system had some strengths but none will satisfy all of the needs of the Networks Division. Areas for improvement of the methodology being used by the Networks Division are listed with recommendations for specific action.

  5. Methodology for economic evaluation of software development projects

    International Nuclear Information System (INIS)

    Witte, D.M.

    1990-01-01

    Many oil and gas exploration and production companies develop computer software in-house or with contract programmers to support their exploration activities. Software development projects compete for funding with exploration and development projects, though most companies lack valid comparison measures for the two types of projects. This paper presents a methodology of pro form a cash flow analysis for software development proposals intended for internal use. This methodology, based on estimates of development and support costs, exploration benefits, and probability of successful development and implementation, can be used to compare proposed software development projects directly with competing exploration proposals

  6. Destination brands and website evaluation: a research methodology

    Directory of Open Access Journals (Sweden)

    J Fernández-Cavia

    2013-10-01

    Full Text Available Introduction:The World Wide Web has become the primary instrument used by tourists in order to search for information. As a result, tourism websites pertaining to destinations need to be appealing and must convey their brand image in an appropriate, effective manner. However, there is no methodology in place to assess the quality and communicative effectiveness of destination websites that is scientifically sound and universally accepted. The development of such a methodology is one of the tasks we have proposed within the framework of the research project: “New strategies for advertising and promoting Spanish tourism brands online” (CSO2008-02627, funded by the Spanish Ministry of Science and Innovation. Method: The project team have developed an interdisciplinary, all-embracing analysis template combining certain automated analyses with other qualitative and quantitative ones. The template comprises a total of 12 subject areas and 154 indicators prepared on the basis of contributions from prominent experts in each of the fields of work. This article sets out the analysis methodology drawn up and possible applications are given. Results: The primary aim of the project is to provide an assessment methodology that would make it possible to optimise destination brand websites, thus providing a tool to support the work of public tourism destination managers.

  7. Methodological Considerations in Designing and Evaluating Animal-Assisted Interventions.

    Science.gov (United States)

    Stern, Cindy; Chur-Hansen, Anna

    2013-02-27

    This paper presents a discussion of the literature on animal-assisted interventions and describes limitations surrounding current methodological quality. Benefits to human physical, psychological and social health cannot be empirically confirmed due to the methodological limitations of the existing body of research, and comparisons cannot validly be made across different studies. Without a solid research base animal-assisted interventions will not receive recognition and acceptance as a credible alternative health care treatment. The paper draws on the work of four systematic reviews conducted over April-May 2009, with no date restrictions, focusing exclusively on the use of canine-assisted interventions for older people residing in long-term care. The reviews revealed a lack of good quality studies. Although the literature base has grown in volume since its inception, it predominantly consists of anecdotal accounts and reports. Experimental studies undertaken are often flawed in aspects of design, conduct and reporting. There are few qualitative studies available leading to the inability to draw definitive conclusions. It is clear that due to the complexities associated with these interventions not all weaknesses can be eliminated. However, there are basic methodological weaknesses that can be addressed in future studies in the area. Checklists for quantitative and qualitative research designs to guide future research are offered to help address methodological rigour.

  8. Economic evaluation studies in reproductive medicine: a systematic review of methodologic quality

    NARCIS (Netherlands)

    Moolenaar, Lobke M.; Vijgen, Sylvia M. C.; Hompes, Peter; van der Veen, Fulco; Mol, Ben Willem J.; Opmeer, Brent C.

    2013-01-01

    To evaluate the methodologic quality of economic analyses published in the field of reproductive medicine. Systematic review. Centers for reproductive care. Infertility patients. We performed a Medline search to identify economic evaluation studies in reproductive medicine. We included studies that

  9. 77 FR 26292 - Risk Evaluation and Mitigation Strategy Assessments: Social Science Methodologies to Assess Goals...

    Science.gov (United States)

    2012-05-03

    ...] Risk Evaluation and Mitigation Strategy Assessments: Social Science Methodologies to Assess Goals... announcing a public workshop entitled ``Risk Evaluation and Mitigation Strategy Assessments: Social Science... constructive dialogue and information-sharing among regulators, researchers, the pharmaceutical industry...

  10. Seismic re-evaluation of Kozloduy NPP criteria, methodology, implementation

    International Nuclear Information System (INIS)

    Kostov, M.

    2003-01-01

    The paper describes some features of the methodology applied for seismic upgrading of civil structures at the site of the Kozloduy NPP. The essence of the methodology is the use of as-build data, realistic damping and inelastic reduction factors. As an example of seismic upgrading the analyses of units 3 and 4 are presented. The analyses are showing that for effective seismic upgrading detailed investigations are needed in order to understand the significant response modes of the structures. In the presented case this is the rotation of the attached flexible structures to the stiff reactor building. Based on this an upgrading approach is applied to increase the seismic resistance for the predominant motion. The second significant approach applied is the strengthening of the prefabricated element joints. Although it is very simple it allows use of the available element capacity. (author)

  11. Evaluating a federated medical search engine: tailoring the methodology and reporting the evaluation outcomes.

    Science.gov (United States)

    Saparova, D; Belden, J; Williams, J; Richardson, B; Schuster, K

    2014-01-01

    Federated medical search engines are health information systems that provide a single access point to different types of information. Their efficiency as clinical decision support tools has been demonstrated through numerous evaluations. Despite their rigor, very few of these studies report holistic evaluations of medical search engines and even fewer base their evaluations on existing evaluation frameworks. To evaluate a federated medical search engine, MedSocket, for its potential net benefits in an established clinical setting. This study applied the Human, Organization, and Technology (HOT-fit) evaluation framework in order to evaluate MedSocket. The hierarchical structure of the HOT-factors allowed for identification of a combination of efficiency metrics. Human fit was evaluated through user satisfaction and patterns of system use; technology fit was evaluated through the measurements of time-on-task and the accuracy of the found answers; and organization fit was evaluated from the perspective of system fit to the existing organizational structure. Evaluations produced mixed results and suggested several opportunities for system improvement. On average, participants were satisfied with MedSocket searches and confident in the accuracy of retrieved answers. However, MedSocket did not meet participants' expectations in terms of download speed, access to information, and relevance of the search results. These mixed results made it necessary to conclude that in the case of MedSocket, technology fit had a significant influence on the human and organization fit. Hence, improving technological capabilities of the system is critical before its net benefits can become noticeable. The HOT-fit evaluation framework was instrumental in tailoring the methodology for conducting a comprehensive evaluation of the search engine. Such multidimensional evaluation of the search engine resulted in recommendations for system improvement.

  12. CONDOS methodology for evaluation of radiation exposure from consumer products

    International Nuclear Information System (INIS)

    O'Donnell, F.R.

    1979-01-01

    The CONDOS methodology is a tool for estimating radiation doses to man from exposures to radionuclides incorporated in consumer products. It consists of two parts: (1) an outline, checklist, and selected data for modeling the life span of a product or the material from which it is made; and (2) a computer code that uses the life-span model to calculate radiation doses to exposed individuals and population groups

  13. Assessment of compliance with regulatory requirements for a best estimate methodology for evaluation of ECCS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Un Chul; Jang, Jin Wook; Lim, Ho Gon; Jeong, Ik [Seoul National Univ., Seoul (Korea, Republic of); Sim, Suk Ku [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2000-03-15

    Best estimate methodology for evaluation of ECCS proposed by KEPCO(KREM) os using thermal-hydraulic best-estimate code and the topical report for the methodology is described that it meets the regulatory requirement of USNRC regulatory guide. In this research the assessment of compliance with regulatory guide. In this research the assessment of compliance with regulatory requirements for the methodology is performed. The state of licensing procedure of other countries and best-estimate evaluation methodologies of Europe is also investigated, The applicability of models and propriety of procedure of uncertainty analysis of KREM are appraised and compliance with USNRC regulatory guide is assessed.

  14. Investigating on the Methodology Effect when Evaluating Lucid Dream

    Directory of Open Access Journals (Sweden)

    Nicolas RIBEIRO

    2016-08-01

    Full Text Available Lucid dreaming (LD is a state of consciousness in which the dreamer is aware that he or she is dreaming and can possibly control the content of his or her dream. To investigate the LD prevalence among different samples, researchers have used different types of methodologies. With regard to retrospective self-report questionnaire, two ways of proceeding seem to emerge. In one case, a definition of LD is given to participants (During lucid dreaming, one is – while dreaming – aware of the fact that one is dreaming. It is possible to deliberately wake up, to control the dream action, or to observe passively the course of the dream with this awareness, while in the other instances, participants are presented separate questions targeting specific LD indicators (dream awareness and dream control.In the present study, we measured LD frequency in a sample of French student in order to investigate for possible disparities in LD frequency depending on the type of questionnaire as outlined above. Moreover, we also study links between the prevalence of LD as assessed respectively by each questionnaire with various factors such as Vividness of Mental Imagery and Parasomnia.Results revealed no significant difference between LD frequencies across questionnaires. For the questionnaire with definition (DefQuest, 81.05% of participants reported experience of LD once or more. Concerning the questionnaire based on LD indicators (AwarContQuest, 73.38% of participants reported having experienced LD once or more. However, with regard to the correlations analysis, links between LD prevalence and factors such as Vividness of Mental Imagery and Parasomnia, varied across questionnaires. This result is an argument suggesting that researchers should be careful when investigating links between LD and other factors. The type of methodology may influence findings on LD research. Further studies are needed to investigate on the methodology effect in LD research namely on the

  15. An Evaluative Methodology for Virtual Communities Using Web Analytics

    Science.gov (United States)

    Phippen, A. D.

    2004-01-01

    The evaluation of virtual community usage and user behaviour has its roots in social science approaches such as interview, document analysis and survey. Little evaluation is carried out using traffic or protocol analysis. Business approaches to evaluating customer/business web site usage are more advanced, in particular using advanced web…

  16. Methodology for Evaluating Safety System Operability using Virtual Parameter Network

    International Nuclear Information System (INIS)

    Park, Sukyoung; Heo, Gyunyoung; Kim, Jung Taek; Kim, Tae Wan

    2014-01-01

    KAERI (Korea Atomic Energy Research Institute) and UTK (University of Tennessee Knoxville) are working on the I-NERI project to suggest complement of this problem. This research propose the methodology which provide the alternative signal in case of unable guaranteed reliability of some instrumentation with KAERI. Proposed methodology is assumed that several instrumentations are working normally under the power supply condition because we do not consider the instrumentation survivability itself. Thus, concept of the Virtual Parameter Network (VPN) is used to identify the associations between plant parameters. This paper is extended version of the paper which was submitted last KNS meeting by changing the methodology and adding the result of the case study. In previous research, we used Artificial Neural Network (ANN) inferential technique for estimation model but every time this model showed different estimate value due to random bias each time. Therefore Auto-Associative Kernel Regression (AAKR) model which have same number of inputs and outputs is used to estimate. Also the importance measures in the previous method depend on estimation model but importance measure of improved method independent on estimation model. Also importance index of previous method depended on estimation model but importance index of improved method is independent on estimation model. In this study, we proposed the methodology to identify the internal state of power plant when severe accident happens also it has been validated through case study. SBLOCA which has large contribution to severe accident is considered as initiating event and relationship amongst parameter has been identified. VPN has ability to identify that which parameter has to be observed and which parameter can be alternative to the missing parameter when some instruments are failed in severe accident. In this study we have identified through results that commonly number 2, 3, 4 parameter has high connectivity while

  17. A methodology for evaluating ''new'' technologies in nuclear power plants

    International Nuclear Information System (INIS)

    Korsah, K.; Clark, R.L.; Holcomb, D.E.

    1994-01-01

    As obsolescence and spare parts issues drive nuclear power plants to upgrade with new technology (such as optical fiber communication systems), the ability of the new technology to withstand stressors present where it is installed needs to be determined. In particular, new standards may be required to address qualification criteria and their application to the nuclear power plants of tomorrow. This paper discusses the failure modes and age-related degradation mechanisms of fiber optic communication systems, and suggests a methodology for identifying when accelerated aging should be performed during qualification testing

  18. Methodology for Evaluating Safety System Operability using Virtual Parameter Network

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sukyoung; Heo, Gyunyoung [Kyung Hee Univ., Yongin (Korea, Republic of); Kim, Jung Taek [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Tae Wan [Kepco International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2014-05-15

    KAERI (Korea Atomic Energy Research Institute) and UTK (University of Tennessee Knoxville) are working on the I-NERI project to suggest complement of this problem. This research propose the methodology which provide the alternative signal in case of unable guaranteed reliability of some instrumentation with KAERI. Proposed methodology is assumed that several instrumentations are working normally under the power supply condition because we do not consider the instrumentation survivability itself. Thus, concept of the Virtual Parameter Network (VPN) is used to identify the associations between plant parameters. This paper is extended version of the paper which was submitted last KNS meeting by changing the methodology and adding the result of the case study. In previous research, we used Artificial Neural Network (ANN) inferential technique for estimation model but every time this model showed different estimate value due to random bias each time. Therefore Auto-Associative Kernel Regression (AAKR) model which have same number of inputs and outputs is used to estimate. Also the importance measures in the previous method depend on estimation model but importance measure of improved method independent on estimation model. Also importance index of previous method depended on estimation model but importance index of improved method is independent on estimation model. In this study, we proposed the methodology to identify the internal state of power plant when severe accident happens also it has been validated through case study. SBLOCA which has large contribution to severe accident is considered as initiating event and relationship amongst parameter has been identified. VPN has ability to identify that which parameter has to be observed and which parameter can be alternative to the missing parameter when some instruments are failed in severe accident. In this study we have identified through results that commonly number 2, 3, 4 parameter has high connectivity while

  19. Risk assessment methodology for evaluating releases of radioactively contaminated materials

    International Nuclear Information System (INIS)

    Chen, S.Y.

    1993-01-01

    Extensive decontamination and decommissioning (D ampersand D) activities are expected to be required in the near future in association with license termination of nuclear power facilities and cleanup efforts at the U.S. Department of Energy's (DOE's) weapons production facilities. In advance of these D ampersand D activities, it is becoming increasingly urgent that standards be established for the release of materials with residual radioactive contamination. The only standards for unrestricted release that currently exist address surface contamination. The methods used to justify those standards were developed some 20 yr ago and may not satisfy today's criteria. Furthermore, the basis of setting standards has moved away from the traditional open-quotes instrumentation-basedclose quotes concept toward a open-quotes risk-basedclose quotes approach. Therefore, as new release standards are developed, it will be necessary that risk assessment methodology consistent with modern concepts be incorporated into the process. This paper discusses recent developments in risk methodology and issues and concerns regarding the future development of standards for the release of radioactively contaminated materials

  20. Comparison of economic evaluation methodology for the nuclear plant lifetime extension

    International Nuclear Information System (INIS)

    Song, T. H.; Jung, I. S.

    2003-01-01

    In connection with economic evaluation of NPP lifetime management, there are lots of methodologies such as present worth calculation, Levelized Unit Energy Cost (LUEC) calculation, and market benefit comparison methodology. In this paper, economic evaluation of NPP lifetime management was carried out by using these three methodologies, and the results of each was compared with the other methodologies. With these three methodologies, break even points of investment cost related to life extension of nuclear power plant were calculated. It was turned out to be as a analysis result that LUEC is more conservative than present worth calculation and that benefit comparison is more conservative than LUEC, which means that Market Benefit Comparison is the most conservative methodology, and which means base load demand of the future would be far more important than any other factors such as capacity factor, investment cost of life extension, and performance of replacing power plant

  1. OpenKnowledge Deliverable 3.3.: A methodology for ontology matching quality evaluation

    OpenAIRE

    Yatskevich, Mikalai; Giunchiglia, Fausto; McNeill, Fiona; Shvaiko, Pavel

    2007-01-01

    This document presents an evaluation methodology for the assessment of quality results produced by ontology matchers. In particular, it discusses: (i) several standard quality measures used in the ontology matching evaluation, (ii) a methodology of how to build semiautomatically an incomplete reference alignment allowing for the assessment of quality results produced by ontology matchers and (iii) a preliminary empirical evaluation of the OpenKnowledge ontology matching component.

  2. An objective methodology for the evaluation of the air quality stations positioning

    International Nuclear Information System (INIS)

    Benassi, A.; Marson, G.; Baraldo, E.; Dalan, F.; Lorenzet, K.; Bellasio, R.; Bianconi, R.

    2006-01-01

    This work describes a methodology for the evaluation of the correct positioning of the monitoring stations of an air quality network. The methodology is based on the Italian legislation, the European Directives and on some technical documents used as guidelines at European level. The paper describes all the assumption on which the methodology is based and the results of its application to the air quality network of Region Veneto (Italy) [it

  3. Evaluation of methodology for QRA in offshore operations

    International Nuclear Information System (INIS)

    Vinnem, Jan Erik

    1998-01-01

    A brief summary is presented of the development of Quantified Risk Analysis in the offshore oil and gas industry for nearly 20 years. From a modest start in Norway as a research activity, QRA has today become one of the focal points of oil and gas management in all countries around the North Sea, and also in other areas. This was mainly initiated by authority regulations and requirements, but has now for some time been driven by the industry itself, as it sees the QRA as a vehicle to gain extended flexibility with respect to optimization of offshore safety standards. This article discusses how QRAs are used, and examines in this light how methodology developments that are and should be carried out by R and D institutions and the industry. Recommendations with respect to how and where knowledge should be developed are expressed and discussed. Lastly visions for future use and developments within the QRA technology are outlined

  4. Methodology for evaluation of economic security of industrial enterprises

    OpenAIRE

    Kopytko Marta Ivanovna

    2014-01-01

    This paper investigates the features of evaluation of ensuring economic security of industrial enterprises and the algorithm of complex evaluation of the economic security of industrial enterprises over time and the system of criteria and their limit values ​​and the dynamics of change to determine the level of economic security industrial enterprise in terms of its components.

  5. A Proposed Methodology for Contextualised Evaluation in Higher Education

    Science.gov (United States)

    Nygaard, Claus; Belluigi, Dina Zoe

    2011-01-01

    This paper aims to inspire stakeholders working with quality of higher education (such as members of study boards, study programme directors, curriculum developers and teachers) to critically consider their evaluation methods in relation to a focus on student learning. We argue that many of the existing methods of evaluation in higher education…

  6. The integrated approach methodology for operator information evaluation

    International Nuclear Information System (INIS)

    Stroube, K.; Modarres, M.; Roush, M.; Hunt, N.; Pearce, R.

    1986-01-01

    The Integrated Approach has developed a complete method for evaluating the relative importance of operation information improvements. By use of decision trees the impact of information on success probability of a function or system can be evaluated. This approach couples goal trees and human success likelihoods to estimate anticipated consequences of a given information system

  7. Adapting Job Analysis Methodology to Improve Evaluation Practice

    Science.gov (United States)

    Jenkins, Susan M.; Curtin, Patrick

    2006-01-01

    This article describes how job analysis, a method commonly used in personnel research and organizational psychology, provides a systematic method for documenting program staffing and service delivery that can improve evaluators' knowledge about program operations. Job analysis data can be used to increase evaluators' insight into how staffs…

  8. [Basic principles and methodological considerations of health economic evaluations].

    Science.gov (United States)

    Loza, Cesar; Castillo-Portilla, Manuel; Rojas, José Luis; Huayanay, Leandro

    2011-01-01

    Health Economics is an essential instrument for health management, and economic evaluations can be considered as tools assisting the decision-making process for the allocation of resources in health. Currently, economic evaluations are increasingly being used worldwide, thus encouraging evidence-based decision-making and seeking efficient and rational alternatives within the framework of health services activities. In this review, we present an overview and define the basic types of economic evaluations, with emphasis on complete Economic Evaluations (EE). In addition, we review key concepts regarding the perspectives from which EE can be conducted, the types of costs that can be considered, the time horizon, discounting, assessment of uncertainty and decision rules. Finally, we describe concepts about the extrapolation and spread of economic evaluations in health.

  9. The study of evaluation methodology of the aging and degradation researches

    International Nuclear Information System (INIS)

    Cho, C. J.; Park, Z. H.; Jeong, I. S.

    2001-01-01

    To judge the usefulness of aging related researches like PLIM (Plant lifetime Management) and aging related degradation, et. al. in PSR(Periodic Safety Review), the evaluation methodology of the R and D have been proposed up to now are reviewed. The infometric methodology is considered to be the optimum method for the evaluation of the nuclear related researches. And finally, to increase the objectiveness and reliability of the infometric methodology in the aging and degradation researches, the indexes of safety, technology and economics are introduced. From this study, the infometric methodology has the advantage of the actual engineering evaluation in the nuclear related researches with other methodologies, but for the further research, the effective construction of DB and survey of various statistics in the technical reports and papers are needed

  10. A methodology for evaluating social impact of Environmental Education Master Training Program

    Directory of Open Access Journals (Sweden)

    Loret de Mola, E.

    2014-01-01

    Full Text Available The paper is intended to describe a methodology for evaluating social impact of Environmental Education master training program by presenting its main stages. The framework serving as starting point and other empirical methods lead to systematized and define the terms of environmental professional training, professional performance of the environmental educator, evaluation, evaluation of professional performance of environmental educators and impact evaluation; as well as distinguishing the functions of impact evaluation in the postgraduate program favoring professor, tutors and trainees development. Previously appraised by consulting experts who gave it high ranks, this methodology is currently being used in evaluating second and third editions.

  11. A methodology for evaluation of a markup-based specification of clinical guidelines.

    Science.gov (United States)

    Shalom, Erez; Shahar, Yuval; Taieb-Maimon, Meirav; Lunenfeld, Eitan

    2008-11-06

    We introduce a three-phase, nine-step methodology for specification of clinical guidelines (GLs) by expert physicians, clinical editors, and knowledge engineers, and for quantitative evaluation of the specification's quality. We applied this methodology to a particular framework for incremental GL structuring (mark-up) and to GLs in three clinical domains with encouraging results.

  12. A Methodology for Sustainability Evaluation and Reporting in Higher Education Institutions

    Science.gov (United States)

    Madeira, Ana C.; Carravilla, Maria Antonia; Oliveira, Jose F.; Costa, Carlos A. V.

    2011-01-01

    The purpose of this paper is to present a methodology that allows higher education institutions (HEIs) to promote, to evaluate and to report on sustainability. The ultimate goal of the afore-mentioned methodology is to help HEIs achieve sustainability. First, a model entitled Sustainability in Higher Education Institutions (SusHEI) that generally…

  13. Towards Standardization of Sampling Methodology for Evaluation of ...

    African Journals Online (AJOL)

    MICHAEL

    2College of Environmental Sciences,Kaduna Polytechnic, Kaduna, Nigeria. ABSTRACT: This ... development of threshold values for risk assessment and soil quality evaluation. For the ..... Therefore the methods chosen for the different steps.

  14. Methodology for quantitative evaluation of diagnostic medical imaging

    International Nuclear Information System (INIS)

    Metz, C.

    1980-01-01

    This report deals with the evaluation of the performance of diagnostic medical imaging procedures using the Receiver Operating Characteristic or ROC analysis. The development of new tests for the statistical significance of apparent differences between ROC curves is discussed

  15. On the methodology of the intercomparison of TND evaluations

    International Nuclear Information System (INIS)

    Yiftah, S.; Caner, M.; Gur, Y.

    1979-03-01

    The paper presents the problems which arise when two independent complete nuclear data evaluations of the same nuclide are available. A detailed intercomparison of the evaluations can be a multi-levelled exercise of considerable detail, the stages of which cannot always be performed. However, a detailed intercomparison can be a rich source for improving considerably the nuclear data used for the different applications. Preliminary examples of intercomparison are given for illustrative purpose. (B.G.)

  16. Methodology for GPS Synchronization Evaluation with High Accuracy

    OpenAIRE

    Li Zan; Braun Torsten; Dimitrova Desislava

    2015-01-01

    Clock synchronization in the order of nanoseconds is one of the critical factors for time based localization. Currently used time synchronization methods are developed for the more relaxed needs of network operation. Their usability for positioning should be carefully evaluated. In this paper we are particularly interested in GPS based time synchronization. To judge its usability for localization we need a method that can evaluate the achieved time synchronization with nanosecond accuracy. Ou...

  17. Methodology for GPS Synchronization Evaluation with High Accuracy

    OpenAIRE

    Li, Zan; Braun, Torsten; Dimitrova, Desislava Cvetanova

    2015-01-01

    Clock synchronization in the order of nanoseconds is one of the critical factors for time-based localization. Currently used time synchronization methods are developed for the more relaxed needs of network operation. Their usability for positioning should be carefully evaluated. In this paper, we are particularly interested in GPS-based time synchronization. To judge its usability for localization we need a method that can evaluate the achieved time synchronization with nanosecond accuracy. O...

  18. Projecting labor demand and worker immigration at nuclear power plant construction sites: an evaluation of methodology

    International Nuclear Information System (INIS)

    Herzog, H.W. Jr; Schlottmann, A.M.; Schriver, W.R.

    1981-12-01

    The study evaluates methodology employed for the projection of labor demand at, and worker migration to, nuclear power plant construction sites. In addition, suggestions are offered as to how this projection methodology might be improved. The study focuses on projection methodologies which forecast either construction worker migration or labor requirements of alternative types of construction activity. Suggested methodological improvements relate both to institutional factors within the nuclear power plant construction industry, and to a better use of craft-specific data on construction worker demand/supply. In addition, the timeliness and availability of the regional occupational data required to support, or implement these suggestions are examined

  19. Automating the evaluation of flood damages: methodology and potential gains

    Science.gov (United States)

    Eleutério, Julian; Martinez, Edgar Daniel

    2010-05-01

    The evaluation of flood damage potential consists of three main steps: assessing and processing data, combining data and calculating potential damages. The first step consists of modelling hazard and assessing vulnerability. In general, this step of the evaluation demands more time and investments than the others. The second step of the evaluation consists of combining spatial data on hazard with spatial data on vulnerability. Geographic Information System (GIS) is a fundamental tool in the realization of this step. GIS software allows the simultaneous analysis of spatial and matrix data. The third step of the evaluation consists of calculating potential damages by means of damage-functions or contingent analysis. All steps demand time and expertise. However, the last two steps must be realized several times when comparing different management scenarios. In addition, uncertainty analysis and sensitivity test are made during the second and third steps of the evaluation. The feasibility of these steps could be relevant in the choice of the extent of the evaluation. Low feasibility could lead to choosing not to evaluate uncertainty or to limit the number of scenario comparisons. Several computer models have been developed over time in order to evaluate the flood risk. GIS software is largely used to realise flood risk analysis. The software is used to combine and process different types of data, and to visualise the risk and the evaluation results. The main advantages of using a GIS in these analyses are: the possibility of "easily" realising the analyses several times, in order to compare different scenarios and study uncertainty; the generation of datasets which could be used any time in future to support territorial decision making; the possibility of adding information over time to update the dataset and make other analyses. However, these analyses require personnel specialisation and time. The use of GIS software to evaluate the flood risk requires personnel with

  20. Aging evaluation methodology of periodic safety review in Korea

    International Nuclear Information System (INIS)

    Park, Heung-Bae; Jung, Sung-Gyu; Jin, Tae-Eun; Jeong, Ill-Seok

    2002-01-01

    In Korea plant lifetime management (PLIM) study for Kori Unit 1 has been performed since 1993. Meanwhile, periodic safety review (PSR) for all operating nuclear power plants (NPPs) has been started with Kori Unit 1 since 2000 per IAEA recommendation. The evaluation period is 10 years, and safety (evaluation) factors are 11 per IAEA guidelines as represented in table 1. The relationship between PSR factors and PLIM is also represented. Among these factors evaluation of 'management of aging' is one of the most important and difficult factor. This factor is related to 'actual condition of the NPP', 'use of experience from other nuclear NPPs and of research findings', and 'management of aging'. The object of 'management of aging' is to obtain plant safety through identifying actual condition of system, structure and components (SSCs) and evaluating aging phenomena and residual life of SSCs using operating experience and research findings. The paper describes the scope and procedure of valuation of 'management of aging', such as, screening criteria of SSCs, Code and Standards, evaluation of SSCs and safety issues as represented. Evaluating SSCs are determined using final safety analysis report (FSAR) and power unit maintenance system for Nuclear Ver. III (PUMAS/N-III). The screening criteria of SSCs are safety-related items (quality class Q), safety-impact items (quality class T), backfitting rule items (fire protection (10CFR50.48), environmental qualification (10CFR50.49), pressurized thermal shock (10CFR50.61), anticipated transient without scram (10CFR50.62), and station blackout (10CFR50.63)) and regulating authority requiring items[1∼3]. The purpose of review of Code and Standards is identifying actual condition of the NPP and evaluating aging management using effective Code and Standards corresponding to reactor facilities. Code and Standards is composed of regulating laws, FSAR items, administrative actions, regulating actions, agreement items, and other

  1. Improvement of test methodology for evaluating diesel fuel stability

    Energy Technology Data Exchange (ETDEWEB)

    Gutman, M.; Tartakovsky, L.; Kirzhner, Y.; Zvirin, Y. [Internal Combustion Engines Lab., Haifa (Israel); Luria, D. [Fuel Authority, Tel Aviv (Israel); Weiss, A.; Shuftan, M. [Israel Defence Forces, Tel Aviv (Israel)

    1995-05-01

    The storage stability of diesel fuel has been extensively investigated for many years under laboratory conditions. Although continuous efforts have been made to improve testing techniques, there does not yet exist a generally accepted correlation between laboratory methods (such as chemical analysis of the fuel) and actual diesel engine tests. A testing method was developed by the Technion Internal Combustion Engines Laboratory (TICEL), in order to address this problem. The test procedure was designed to simulate diesel engine operation under field conditions. It is based on running a laboratory-modified single cylinder diesel engine for 50 h under cycling operating conditions. The overall rating of each test is based on individual evaluation of the deposits and residue formation in the fuel filter, nozzle body and needle, piston head, piston rings, exhaust valve, and combustion chamber (six parameters). Two methods for analyzing the test results were used: objective, based on measured data, and subjective, based on visual evaluation results of these deposits by a group of experts. Only the residual level in the fuel filter was evaluated quantitatively by measured results. In order to achieve higher accuracy of the method, the test procedure was improved by introducing the measured results of nozzle fouling as an additional objective evaluating (seventh) parameter. This factor is evaluated on the basis of the change in the air flow rate through the nozzle before and after the complete engine test. Other improvements in the method include the use of the nozzle assembly photograph in the test evaluation, and representation of all seven parameters on a continuous scale instead of the discrete scale used anteriorly, in order to achieve higher accuracy. This paper also contains the results obtained by application of this improved fuel stability test for a diesel fuel stored for a five-year period.

  2. A Proposed Methodology for Contextualised Evaluation in Higher Education

    DEFF Research Database (Denmark)

    Nygaard, Claus; Belluigi, Dian Zoe

    2011-01-01

    This paper aims to inspire stakeholders working with quality of higher education (such as members of study boards, study programme directors, curriculum developers and teachers) to critically consider their evaluation methods in relation to a focus on student learning. We argue that many...... of the existing methods of evaluation in higher education are underpinned by a conception of learning that is de‐contextualised. As a consequence, many data collection methods do not address aspects that affect students’ learning. This is problematic because the core aim of higher education is to facilitate...

  3. Supporting the Future Total Force: A Methodology for Evaluating Potential Air National Guard Mission Assignments

    National Research Council Canada - National Science Library

    Lynch, Kristin F; Drew, John G; Sleeper, Sally; Williams, William A; Masters, James M; Luangkesorn, Louis; Tripp, Robert S; Lichter, Dahlia S; Roll, Charles R

    2007-01-01

    ... trained, highly experienced personnel with no aircraft to operate and support. The authors develop a methodology to evaluate missions that could be transferred from the active component to the ANG without significant cost to the total force...

  4. Economic evaluations of occupational health interventions from a corporate perspective - A systematic review of methodological quality

    NARCIS (Netherlands)

    Uegaki, K.; Bruijne, M.C. de; Lambeek, L.; Anema, J.R.; Beek, A.J. van der; Mechelen, W. van; Tulder, M.W. van

    2010-01-01

    Objective: Using a standardized quality criteria list, we appraised the methodological quality of economic evaluations of occupational safety and health (OSH) interventions conducted from a corporate perspective. Methods: The primary literature search was conducted in Medline and Embase.

  5. Evaluating environmental policy instruments mixes; a methodology illustrated by noise policy in the Netherlands

    NARCIS (Netherlands)

    Weber, Miriam; Driessen, Peter P J; Runhaar, Hens A C

    2014-01-01

    Environmental policy is characterised by complexity, in causes and effects, resulting in various combinations of policy instruments. However, evaluating these policy instrument mixes and assessing their effectiveness is difficult because of a lack of methodological approaches. This paper therefore

  6. Monuments deterioration evaluation, using digited images. A methodology

    Directory of Open Access Journals (Sweden)

    Ángel, María C.

    1995-12-01

    Full Text Available In this work a methodology is proposed for data processing, integrating the techniques of digital images processing and the analytical capacity of graphical referencing systems and relational databases, in relation with the monuments. The images are generated using the digital image processing and they are included into a graphical data processing systems associated with a database containing the characteristics of the ashars or constituent elements. By combination of the images with the database induced properties the information is processed. The results are thematic maps that we save such as images. These maps are layers of new information (deduced levels. The elaboration of these maps allows attacking the problems of the restoration, renovation or treatment of the different monumental spaces on a global way, paying special attention on the most gravely affected areas.

    En este trabajo se propone una metodología para el tratamiento de la información, integrando las técnicas de proceso digital de imágenes, la capacidad de análisis de los sistemas de referenciación gráfica y las bases de datos relacionales, referidas a monumentos. Para ello se elaboran las imágenes base por algoritmos propios del proceso digital, incluyendo aquellas en una aplicación especifica que asocia cada capa a una base de datos con las propiedades petrofísicas, hídricas, etc., o bien entre si, dando lugar a mapas temáticos. La generación de estos mapas permite abordar los problemas de restauración, rehabilitación o tratamiento de los diferentes espacios monumentales de forma global, con incidencia especial en las zonas más afectadas.

  7. Situated Research Design and Methodological Choices in Formative Program Evaluation

    Science.gov (United States)

    Supovitz, Jonathan

    2013-01-01

    Design-based implementation research offers the opportunity to rethink the relationships between intervention, research, and situation to better attune research and evaluation to the program development process. Using a heuristic called the intervention development curve, I describe the rough trajectory that programs typically follow as they…

  8. Methodology for Evaluating Quality and Reusability of Learning Objects

    Science.gov (United States)

    Kurilovas, Eugenijus; Bireniene, Virginija; Serikoviene, Silvija

    2011-01-01

    The aim of the paper is to present the scientific model and several methods for the expert evaluation of quality of learning objects (LOs) paying especial attention to LOs reusability level. The activities of eQNet Quality Network for a European Learning Resource Exchange (LRE) aimed to improve reusability of LOs of European Schoolnet's LRE…

  9. Evaluation of two radiographic developers by Sensitometric methodology

    International Nuclear Information System (INIS)

    Alcantara, T.M.C.

    1976-01-01

    The results obtained by processing Eastman KODAK's Periapical ultra speed film in a solution primarily suggested for use in automatic processors are evaluated though the characteristic curve. The solution tested (Tiplimatic) was employed at 30 0 C during 30 seconds. The activity of this solution was also studied, during 80 days. (M.A.C.) [pt

  10. Absorbed dose evaluations in retrospective dosimetry: Methodological developments using quartz

    DEFF Research Database (Denmark)

    Bailiff, I.K.; Bøtter-Jensen, L.; Correcher, V.

    2000-01-01

    Dose evaluation procedures based on luminescence techniques were applied to 50 quartz samples extracted from bricks that had been obtained from populated or partly populated settlements in Russia and Ukraine downwind of the Chernobyl NPP. Determinations of accrued dose in the range similar to 30...

  11. A usage-centered evaluation methodology for unmanned ground vehicles

    NARCIS (Netherlands)

    Diggelen, J. van; Looije, R.; Mioch, T.; Neerincx, M.A.; Smets, N.J.J.M.

    2012-01-01

    This paper presents a usage-centered evaluation method to assess the capabilities of a particular Unmanned Ground Vehicle (UGV) for establishing the operational goals. The method includes a test battery consisting of basic tasks (e.g., slalom, funnel driving, object detection). Tests can be of

  12. Methodological proposal for environmental impact evaluation since different specific methods

    International Nuclear Information System (INIS)

    Leon Pelaez, Juan Diego; Lopera Arango Gabriel Jaime

    1999-01-01

    Some conceptual and practical elements related to environmental impact evaluation are described and related to the preparation of technical reports (environmental impact studies and environmental management plans) to be presented to environmental authorities for obtaining the environmental permits for development projects. In the first part of the document a summary of the main aspects of normative type is made that support the studies of environmental impact in Colombia. We propose a diagram for boarding and elaboration of the evaluation of environmental impact, which begins with the description of the project and of the environmental conditions in the area of the same. Passing then to identify the impacts through a method matricial and continuing with the quantitative evaluation of the same. For which we propose the use of the method developed by Arboleda (1994). Also we propose to qualify the activities of the project and the components of the environment in their relative importance, by means of a method here denominated agglomerate evaluation. Which allows finding those activities more impacting and the mostly impacted components. Lastly it is presented some models for the elaboration and presentation of the environmental management plans. The pursuit programs and those of environmental supervision

  13. New Methodologies To Evaluate the Memory Strategies of Deaf Individuals.

    Science.gov (United States)

    Clark, Diane

    Prior studies have often confounded linguistic and perceptual performance when evaluating deaf subjects' skills, a confusion that may be responsible for results indicating lesser recall ability among the deaf. In this series of studies this linguistic/perceptual confound was investigated in both the iconic and short term memory of deaf…

  14. Comparison of economic evaluation methodology between levelized method and the evaluation system in China

    International Nuclear Information System (INIS)

    Zhang Shengli

    2005-01-01

    Different methodology would bring different results. This paper includes an introduction of levelized discounted generation cost methodology as well as that of Chinese system, respectively. In general, there have two key indices in Chinese evaluation system, they are generation cost and electricity sales price to the grid. This paper contains a description of cost breakdown and calculation procedure for each index. Comparison between these two methods and the primary differences are also included. For the first time, equations for calculating generation cost and selling price to the grid based on Chinese system have been derived, and its accuracy has been shown through running the special computer program. The two systems are quite different in many aspects. Firstly, levelized generation cost is always calculated with discounted method that excluded in Chinese system. Secondly, levelized generation cost is a single and constant value that would not change over the economic life while generation cost in Chinese system is estimated on a year by year base. Thirdly, the makeup of generation cost in Chinese system is different from that of levelized system since taxes and dividend share removed. Finally, the electricity sales price in Chinese system is more similar to levelized generation cost. (authors)

  15. Status of the Gen-IV Proliferation Resistance and Physical Protection (PRPP) Evaluation Methodology

    International Nuclear Information System (INIS)

    Whitlock, J.; Bari, R.; Peterson, P.; Padoani, F.; Cojazzi, G.G.M.; Renda, G.; ); Cazalet, J.; Haas, E.; Hori, K.; Kawakubo, Y.; Chang, S.; Kim, H.; Kwon, E.-H.; Yoo, H.; Chebeskov, A.; Pshakin, G.; Pilat, J.F.; Therios, I.; Bertel, E.

    2015-01-01

    Methodologies have been developed within the Generation IV International Forum (GIF) to support the assessment and improvement of system performance in the areas safeguards, security, economics and safety. Of these four areas, safeguards and security are the subjects of the GIF working group on Proliferation Resistance and Physical Protection (PRPP). Since the PRPP methodology (now at Revision 6) represents a mature, generic, and comprehensive evaluation approach, and is freely available on the GIF public website, several non-GIF technical groups have chosen to utilize the PRPP methodology for their own goals. Indeed, the results of the evaluations performed with the methodology are intended for three types of generic users: system designers, programme policy makers, and external stakeholders. The PRPP Working Group developed the methodology through a series of demonstration and case studies. In addition, over the past few years various national and international groups have applied the methodology to inform nuclear energy system designs, as well as to support the development of approaches to advanced safeguards. A number of international workshops have also been held which have introduced the methodology to design groups and other stakeholders. In this paper we summarize the technical progress and accomplishments of the PRPP evaluation methodology, including applications outside GIF, and we outline the PRPP methodology's relationship with the IAEA's INPRO methodology. Current challenges with the efficient implementation of the methodology are outlined, along with our path forward for increasing its accessibility to a broader stakeholder audience - including supporting the next generation of skilled professionals in the nuclear non-proliferation field. (author)

  16. EVALUATION OF TRAINING AND‐METHODOLOGICAL SUPPORT OF UNIVERSITY COURSES (in Russian

    Directory of Open Access Journals (Sweden)

    Natalia BELKINA

    2012-04-01

    Full Text Available Quality of teaching at a Higher Education Institution certainly depends on the integrity and quality of its training and methodological support. However, in order to improve this quality it is necessary to have a sound methodology for evaluation of such support. This article contains a list of recommended university teaching course materials, criteria of their separate components evaluation and an approach to calculating the quality levels of separate components and teaching course materials as a whole.

  17. Are marketed topical metronidazole creams bioequivalent? Evaluation by in vivo microdialysis sampling and tape stripping methodology

    DEFF Research Database (Denmark)

    Garcia Ortiz, Patricia Elodia; Hansen, S H; Shah, Surendra P.

    2011-01-01

    To evaluate the bioequivalence of 3 marketed topical metronidazole formulations by simultaneous dermal microdialysis and stratum corneum sampling by the tape stripping methodology, and to compare the techniques as tools for the determination of bioequivalence.......To evaluate the bioequivalence of 3 marketed topical metronidazole formulations by simultaneous dermal microdialysis and stratum corneum sampling by the tape stripping methodology, and to compare the techniques as tools for the determination of bioequivalence....

  18. METAHEURISTICS EVALUATION: A PROPOSAL FOR A MULTICRITERIA METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Valdir Agustinho de Melo

    2015-12-01

    Full Text Available ABSTRACT In this work we propose a multicriteria evaluation scheme for heuristic algorithms based on the classic Condorcet ranking technique. Weights are associated to the ranking of an algorithm among a set being object of comparison. We used five criteria and a function on the set of natural numbers to create a ranking. The discussed comparison involves three well-known problems of combinatorial optimization - Traveling Salesperson Problem (TSP, Capacitated Vehicle Routing Problem (CVRP and Quadratic Assignment Problem (QAP. The tested instances came from public libraries. Each algorithm was used with essentially the same structure, the same local search was applied and the initial solutions were similarly built. It is important to note that the work does not make proposals involving algorithms: the results for the three problems are shown only to illustrate the operation of the evaluation technique. Four metaheuristics - GRASP, Tabu Search, ILS and VNS - are therefore only used for the comparisons.

  19. Evaluation of Adult Literacy Education in the United States: A Review of Methodological Issues

    Science.gov (United States)

    Shi, Yan; Tsang, Mun C.

    2008-01-01

    This is a critical review of methodological issues in the evaluation of adult literacy education programs in the United States. It addresses the key research questions: What are the appropriate methods for evaluating these programs under given circumstances. It identifies 15 evaluation studies that are representative of a range of adult literacy…

  20. The methodological quality of economic evaluation studies in obstetrics and gynecology: a systematic review

    NARCIS (Netherlands)

    Vijgen, Sylvia M. C.; Opmeer, Brent C.; Mol, Ben Willem J.

    2013-01-01

    We evaluated the methodological quality of economic evaluation studies in the field of obstetrics and gynecology published in the last decade. A MEDLINE search was performed to find economic evaluation studies in obstetrics and gynecology from the years 1997 through 2009. We included full economic

  1. Mechanism analysis and evaluation methodology of regenerative braking contribution to energy efficiency improvement of electrified vehicles

    International Nuclear Information System (INIS)

    Lv, Chen; Zhang, Junzhi; Li, Yutong; Yuan, Ye

    2015-01-01

    Highlights: • The energy flow of an electric vehicle with regenerative brake is analyzed. • Methodology for measuring the regen brake contribution is discussed. • Evaluation parameters of regen brake contribution are proposed. • Vehicle tests are carried out on chassis dynamometer. • Test results verify the evaluation method and parameters proposed. - Abstract: This article discusses the mechanism and evaluation methods of contribution brought by regenerative braking to electric vehicle’s energy efficiency improvement. The energy flow of an electric vehicle considering the braking energy regeneration was analyzed. Then, methodologies for measuring the contribution made by regenerative brake to vehicle energy efficiency improvement were introduced. Based on the energy flow analyzed, two different evaluation parameters were proposed. Vehicle tests were carried out on chassis dynamometer under typical driving cycles with three different control strategies. The experimental results the difference between the proposed two evaluation parameters, and demonstrated the feasibility and effectiveness of the evaluation methodologies proposed

  2. Review of methodologies and polices for evaluation of energy efficiency in high energy-consuming industry

    International Nuclear Information System (INIS)

    Li, Ming-Jia; Tao, Wen-Quan

    2017-01-01

    Highlights: • The classification of the industrial energy efficiency index has been summarized. • The factors of energy efficiency and their implement in industries are discussed. • Four main evaluation methodologies of energy efficiency in industries are concluded. • Utilization of the methodologies in energy efficiency evaluations are illustrated. • Related polices and suggestions based on energy efficiency evaluations are provided. - Abstract: Energy efficiency of high energy-consuming industries plays a significant role in social sustainability, economic performance and environmental protection of any nation. In order to evaluate the energy efficiency and guide the sustainability development, various methodologies have been proposed for energy demand management and to measure the energy efficiency performance accurately in the past decades. A systematical review of these methodologies are conducted in the present paper. First, the classification of the industrial energy efficiency index has been summarized to track the previous application studies. The single measurement indicator and the composite index benchmarking are highly recognized as the modeling tools for power industries and policy-making in worldwide countries. They are the pivotal figures to convey the fundamental information in energy systems for improving the performance in fields such as economy, environment and technology. Second, the six factors that influence the energy efficiency in industry are discussed. Third, four major evaluation methodologies of energy efficiency are explained in detail, including stochastic frontier analysis, data envelopment analysis, exergy analysis and benchmarking comparison. The basic models and the developments of these methodologies are introduced. The recent utilization of these methodologies in the energy efficiency evaluations are illustrated. Some drawbacks of these methodologies are also discussed. Other related methods or influential indicators

  3. Interim report on nodel evaluation methodology and the evaluation of LEAP

    Energy Technology Data Exchange (ETDEWEB)

    Alsmiller, R.G. Jr.; Barish, J.; Bjornstad, D.

    1980-04-01

    This report describes progress made at ORNL toward development and demonstration of a methodology for evaluating energy-economic modeling codes and important results derived from these codes. To bolster traditional evaluation methods with more-quantitative procedures of interest to the Energy Information Administration, ORNL is applying sensitivity theory as part of a comprehensive effort to quantify the importance of various data and model parameters to the key results that are of interest. The Long-Term Energy Analysis Program (LEAP) was chosen as the initial focus for the research. LEAP is an energy-economy model which resides in the Long-Term Energy Analysis Division (LTEAD) of the Integrative Analysis Group in the Office of Applied Analysis, EIA. LTEAD developed Model 22C of LEAP for two reasons: (1) to prepare projections through the year 2020, which were needed for the 1978 EIA Annual Report to Congress and (2) to develop a base for analyses of specific options for Federal action. LEAP Model 22C and its uses are described to provide the background for this interim description of the model evaluation effort at ORNL. 19 figures, 10 tables.

  4. The development of evaluation methodology for advanced interactive communication

    International Nuclear Information System (INIS)

    Okamoto, K.

    2005-01-01

    Face-to-face communication is one of the essential style of communication. Trough face-to-face communication, people exchange much information at a time, both verbal and non-verbal information, which is most effective to learn each other. The authors focused on the face-to-face communication, and developed an evaluation method to quantify the effectiveness of communication. We regard conversation as an exchange of keywords. The effectiveness of conversation is valued by the amount of the keywords, and the achievement of mutual understandings. Through two people's face-to-face communication, the author quantified the shared information by measuring the change of the amount of the participants' knowledge. The participants' knowledge is counted by the words they can give. We measured the change in their shared knowledge (number of the words they gave associated to the theme). And we also quantified the discords in their understandings against their partners by measuring the discords between the knowledge that they think they share and the knowledge that they really share. Through these data, we evaluate the effectiveness of communication and analyzed the trends of mutual understanding. (authors)

  5. Evaluation methodology and prospective introduction scenarios of FR cycle systems

    International Nuclear Information System (INIS)

    Fujii, Sumio; Katoh, Atsushi; Sato, Kazujiro

    2003-01-01

    The 21st century society will be facing growing demand of energy, global environmental issues and concerns about fossil fuel exhaustion. In this society, it is essential to seek for a sustainable energy system to solve these energy-related concerns. In order to find ways for solving these problems, 'Feasibility Study on Commercialized FR Cycle System' was launched in 1999 as a joint research project of JNC, electric utilities, JAERI, CRIEPI etc. This project aims to build promising FR cycle technologies for the 21st century. Now, we are in the second phase (JFY 2001-2005) of this project. At the end of the second phase, we will propose promising concepts through applying innovative technologies. We started this Feasibility Study with defining the development target, which ended in five items; safety, economy, environmental burden, resource utilization and nuclear non-proliferation. These items should also serve as basic viewpoints to evaluate achievements of the study. This paper describes how we evaluate FR cycle options to come up with the final promising candidates. This paper also describes a prospective scenario to introduce FR cycle system, which shows how the FR cycle will be replacing existing LWRs by using limited natural uranium resource and spent fuels. (author)

  6. Development of CANDU ECCS performance evaluation methodology and guides

    Energy Technology Data Exchange (ETDEWEB)

    Bang, Kwang Hyun; Park, Kyung Soo; Chu, Won Ho [Korea Maritime Univ., Jinhae (Korea, Republic of)

    2003-03-15

    The objectives of the present work are to carry out technical evaluation and review of CANDU safety analysis methods in order to assist development of performance evaluation methods and review guides for CANDU ECCS. The applicability of PWR ECCS analysis models are examined and it suggests that unique data or models for CANDU are required for the following phenomena: break characteristics and flow, frictional pressure drop, post-CHF heat transfer correlations, core flow distribution during blowdown, containment pressure, and reflux rate. For safety analysis of CANDU, conservative analysis or best estimate analysis can be used. The main advantage of BE analysis is a more realistic prediction of margins to acceptance criteria. The expectation is that margins demonstrated with BE methods would be larger that when a conservative approach is applied. Some outstanding safety analysis issues can be resolved by demonstration that accident consequences are more benign than previously predicted. Success criteria for analysis and review of Large LOCA can be developed by top-down approach. The highest-level success criteria can be extracted from C-6 and from them, the lower level criteria can be developed step-by-step, in a logical fashion. The overall objectives for analysis and review are to verify radiological consequences and frequency are met.

  7. Methodology evaluation of innovative projects under risk and uncertainty

    Directory of Open Access Journals (Sweden)

    2012-09-01

    Full Text Available This article deals with problems connected with the assessment of innovative projects in the context of risk and uncertainty, topical issues of evaluation of innovative projects at the present stage of development of the Russian economy. By the example of the solution of the "crossing the river" is considering the possibility of using hierarchical models to address it. In what follows, and compares the priorities of different groups of factors are given by calculating the overall costs and benefits. The paper provides a rationale for combined use of four aspects: the beneficial aspects of the decision (the benefits and opportunities and negative (costs and risks that may lead to the decision in question.

  8. Using Bioacoustical Methodologies to Evaluate Equine Hearing Capabilities and Cognition

    Science.gov (United States)

    Makepeace, Shawn

    The field of Bioacoustics is an emerging field of science that investigates various aspects of animal audiology and communication. More recently, audiological means have been used to evaluate the cognitive abilities of animals using event related brain potentials (ERP's). The Mismatch Negativity (MMN) component of the ERP is considered a cognitive neuroelectric phenomenon since it is generated in the area of the cortex that is responsible for evaluating sound stimuli including the ability to discriminate. Such discrimination produces a negative-going waveform with a relative latency of about 150-250 msec when elicited with auditory stimuli in human adults. The MMN response is elicited by use of the oddball paradigm in which two different tones are presented in pseudo-random order. The purpose of this study was to determine if elicitation of the MMN is achievable in the horse by use of current equipment in a non-clinical setting such as a barn. During the course of this experiment, it became obvious that the major challenge was the excessive amount of noise that inundated the waveforms thereby making any specific waves even remotely discernible. Attempts were made to improve the signal-to-noise ratio (SNR) by modifications to the testing unit and the addition of several in-line and digital filters. However, even with these modifications, the MMN response still could not be identifiable within the noise of the waveforms. Therefore, the matter of whether or not the horse elicits a MMN response should be revised to if it is even feasible to elicit a MMN response in these animals.

  9. Evaluation methodology of a manipulator actuator for the dismantling process during nuclear decommissioning

    International Nuclear Information System (INIS)

    Park, Jongwon; Kim, Chang-Hoi; Jeong, Kyung-min; Choi, Byung-Seon; Moon, Jeikwon

    2016-01-01

    Highlights: • A methodology to evaluate actuators of a dismantling manipulator. • Evaluation criteria for choosing the most suitable actuator type. • A mathematical evaluation model for evaluation. • The evaluation method is expected to be used for determining other manipulators. - Abstract: This paper presents a methodology to evaluate actuators of a manipulator for dismantling nuclear power plants. Actuators are the most dominant components because a dismantling manipulator relies heavily on the actuator type used. To select the most suitable actuator, evaluation criteria are presented in four categories based on the nuclear dismantling environment. A mathematical model is presented and evaluation results are calculated with weights and scores for each criterion. The proposed evaluation method is expected to be used for determining other aspects of the design of dismantling manipulators.

  10. Development of a methodology to evaluate material accountability in pyroprocess

    Science.gov (United States)

    Woo, Seungmin

    sampling calculated by the central limit theorem and the Geary-Hinkley transformation. Then, the uncertainty propagation through the key-pyroprocess is conducted to analyze the Material Unaccounted For (MUF), which is a random variable defined as a receipt minus a shipment of a process, in the system. The random variable, LOPu, is defined for evaluating the non-detection probability at each Key Measurement Point (KMP) as the original Pu mass minus the Pu mass after a missing scenario. A number of assemblies for the LOPu to be 8 kg is considered in this calculation. The probability of detection for the 8 kg LOPu is evaluated with respect the size of granule and powder using the event tree analysis and the hypothesis testing method. We can observe there are possible cases showing the probability of detection for the 8 kg LOPu less than 95%. In order to enhance the detection rate, a new Material Balance Area (MBA) model is defined for the key-pyroprocess. The probabilities of detection for all spent fuel types based on the new MBA model are greater than 99%. Furthermore, it is observed that the probability of detection significantly increases by increasing granule sample sizes to evaluate the Pu-to-244Cm-ratio before the key-pyroprocess. Based on these observations, even though the Pu material accountability in pyroprocess is affected by the non-uniformity of nuclide composition when the Pu-to-244Cm-ratio method is being applied, that is surmounted by decreasing the uncertainty of measured ratio by increasing sample sizes and modifying the MBAs and KMPs. (Abstract shortened by ProQuest.).

  11. BWR power oscillation evaluation methodologies in core design

    International Nuclear Information System (INIS)

    Hotta, Akitoshi

    1995-01-01

    At the initial stage of BWR development, the power oscillation due to the nuclear-thermal interaction originated in random boiling phenomena and nuclear void feedback was feared. But it was shown that under the high pressure condition in the normal operation of recent commercial BWRs, the core is in very stable state. However, power oscillation events have been observed in actual machines, and it is necessary to do the stability evaluation that sufficiently reflects the detailed operation conditions of actual plants. As the cause of power oscillation events, the instability of control system and nuclear-thermal coupling instability are important, and their mechanisms are explained. As the model for analyzing the stability of BWR core, the nuclear-thermal coupling model in frequency domain is the central existence. As the information for the design, the parameters of fuel assemblies, and the nuclear parameters and the thermohydraulic parameters of cores are enumerated. LAPUR-TSI is a nuclear-thermal coupling model. The analysis system in the software of Tokyo Electric Power Co. is outlined, and the analysis model was verified. (K.I.)

  12. Time-dependent methodology for fault tree evaluation

    International Nuclear Information System (INIS)

    Vesely, W.B.

    1976-01-01

    Any fault tree may be evaluated applying the method called the kinetic theory of fault trees. The basic feature of this method as presented here is in that any information on primary failure, type failure or peak failure is derived from three characteristics: probability of existence, failure intensity and failure density. The determination of the said three characteristics for a given phenomenon yields the remaining probabilistic information on the individual aspects of the failure and on their totality for the whole observed period. The probabilistic characteristics are determined by applying the analysis of phenomenon probability. The total time dependent information on the peak failure is obtained by using the type failures (critical paths) of the fault tree. By applying the said process the total time dependent information is obtained for every primary failure and type failure of the fault tree. In the application of the method of the kinetic theory of fault trees represented by the PREP and KITT programmes, the type failures are first obtained using the deterministic testing method or using the Monte Carlo simulation (PREP programme). The respective characteristics are then determined using the kinetic theory of fault trees (KITT programmes). (Oy)

  13. Methodology for surge pressure evaluation in a water injection system

    Energy Technology Data Exchange (ETDEWEB)

    Meliande, Patricia; Nascimento, Elson A. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Dept. de Engenharia Civil; Mascarenhas, Flavio C.B. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Lab. de Hidraulica Computacional; Dandoulakis, Joao P. [SHELL of Brazil, Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Predicting transient effects, known as surge pressures, is of high importance for offshore industry. It involves detailed computer modeling that attempts to simulate the complex interaction between flow line and fluid in order to ensure efficient system integrity. Platform process operators normally raise concerns whether the water injection system is adequately designed or not to be protected against possible surge pressures during sudden valve closure. This report aims to evaluate the surge pressures in Bijupira and Salema water injection systems due to valve closure, through a computer model simulation. Comparisons among the results from empirical formulations are discussed and supplementary analysis for Salema system were performed in order to define the maximum volumetric flow rate for which the design pressure was able to withstand. Maximum surge pressure values of 287.76 bar and 318.58 bar, obtained in Salema and Bijupira respectively, using empirical formulations have surpassed the operating pressure design, while the computer model results have pointed the greatest surge pressure value of 282 bar in Salema system. (author)

  14. Evaluating health effects of transport interventions methodologic case study.

    Science.gov (United States)

    Ogilvie, David; Mitchell, Richard; Mutrie, Nanette; Petticrew, Mark; Platt, Stephen

    2006-08-01

    There is little evidence about the effects of environmental interventions on population levels of physical activity. Major transport projects may promote or discourage physical activity in the form of walking and cycling, but researching the health effects of such "natural experiments" in transport policy or infrastructure is challenging. Case study of attempts in 2004-2005 to evaluate the effects of two major transport projects in Scotland: an urban congestion charging scheme in Edinburgh, and a new urban motorway (freeway) in Glasgow. These interventions are typical of many major transport projects. They are unique to their context. They cannot easily be separated from the other components of the wider policies within which they occur. When, where, and how they are implemented are political decisions over which researchers have no control. Baseline data collection required for longitudinal studies may need to be planned before the intervention is certain to take place. There is no simple way of defining a population or area exposed to the intervention or of defining control groups. Changes in quantitative measures of health-related behavior may be difficult to detect. Major transport projects have clear potential to influence population health, but it is difficult to define the interventions, categorize exposure, or measure outcomes in ways that are likely to be seen as credible in the field of public health intervention research. A final study design is proposed in which multiple methods and spatial levels of analysis are combined in a longitudinal quasi-experimental study.

  15. A methodology to emulate and evaluate a productive virtual workstation

    Science.gov (United States)

    Krubsack, David; Haberman, David

    1992-01-01

    The Advanced Display and Computer Augmented Control (ADCACS) Program at ACT is sponsored by NASA Ames to investigate the broad field of technologies which must be combined to design a 'virtual' workstation for the Space Station Freedom. This program is progressing in several areas and resulted in the definition of requirements for a workstation. A unique combination of technologies at the ACT Laboratory have been networked to effectively create an experimental environment. This experimental environment allows the integration of nonconventional input devices with a high power graphics engine within the framework of an expert system shell which coordinates the heterogeneous inputs with the 'virtual' presentation. The flexibility of the workstation is evolved as experiments are designed and conducted to evaluate the condition descriptions and rule sets of the expert system shell and its effectiveness in driving the graphics engine. Workstation productivity has been defined by the achievable performance in the emulator of the calibrated 'sensitivity' of input devices, the graphics presentation, the possible optical enhancements to achieve a wide field of view color image and the flexibility of conditional descriptions in the expert system shell in adapting to prototype problems.

  16. Performance Evaluation and Measurement of the Organization in Strategic Analysis and Control: Methodological Aspects

    OpenAIRE

    Živan Ristić; Neđo Balaban

    2006-01-01

    Information acquired by measuring and evaluation are a necessary condition for good decision-making in strategic management. This work deals with : (a) Methodological aspects of evaluation (kinds of evaluation, metaevaluation) and measurement (supposition of isomorphism in measurement, kinds and levels of measurement, errors in measurement and the basic characteristics of measurement) (b) Evaluation and measurement of potential and accomplishments of the organization in Kaplan-Norton perspect...

  17. Development of a methodology of evaluation of financial stability of commercial banks

    Directory of Open Access Journals (Sweden)

    Brauers Willem Karel M.

    2014-01-01

    Full Text Available The field of evaluation of financial stability of commercial banks, which emanates from persistent existence of financial crisis, induces interest of researchers for over a century. The span of prevailing methodologies stretches from over-simplified risk-return approaches to ones comprising large number of economic variables on the micro- and/or macro-economic level. Methodologies of rating agencies and current methodologies reviewed and applied by the ECB are not intended for reducing information asymmetry in the market of commercial banks. In the paper it is shown that the Lithuanian financial system is bankbased with deposits of households being its primary sources, and its stability is primarily depending on behavior of depositors. A methodology of evaluation of commercial banks with features of decreasing information asymmetry in the market of commercial banks is being developed by comparing different MCDA methods.

  18. The status of proliferation resistance evaluation methodology development in GEN IV international forum

    International Nuclear Information System (INIS)

    Inoue, Naoko; Kawakubo, Yoko; Seya, Michio; Suzuki, Mitsutoshi; Kuno, Yusuke; Senzaki, Masao

    2010-01-01

    The Generation IV Nuclear Energy Systems International Forum (GIF) Proliferation Resistance and Physical Protection Working Group (PR and PP WG) was established in December 2002 in order to develop the PR and PP evaluation methodology for GEN IV nuclear energy systems. The methodology has been studied and established by international consensus. The PR and PP WG activities include development of the measures and metrics; establishment of the framework of PR and PP evaluation, the demonstration study using Example Sodium Fast Reactor (ESFR), which included the development of three evaluation approaches; the Case Study using ESFR and four kinds of threat scenarios; the joint study with GIF System Steering Committees (SSCs) of the six reactor design concepts; and the harmonization study with the IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). This paper reviews the status of GIF PR and PP studies and identifies the challenges and directions for applying the methodology to evaluate future nuclear energy systems in Japan. (author)

  19. Contribution to the methodology of safety evaluation - and licensing of reloading cycle for PWR type reactors

    International Nuclear Information System (INIS)

    Esteves, R.G.

    1981-01-01

    A simplified methodology for evaluating a reload safety cycle is presented. This methodology consists in selecting for each foreseen accident, the nuclear key reload safety parameters which determine the accident evolution. So, each key reload parameter is calculated and compared with its value for the first cycle. Those accidents, which have their key reload parameter bounded by the values of the first cycle do not need reanalise. Extension of the validity of this methodology when there exists change of fuel supplier is commented. (Author) [pt

  20. Review of evaluation on ecological carrying capacity: The progress and trend of methodology

    Science.gov (United States)

    Wang, S. F.; Xu, Y.; Liu, T. J.; Ye, J. M.; Pan, B. L.; Chu, C.; Peng, Z. L.

    2018-02-01

    The ecological carrying capacity (ECC) has been regarded as an important reference to indicate the level of regional sustainable development since the very beginning of twenty-first century. By a brief review of the main progress in ECC evaluation methodologies in recent five years, this paper systematically discusses the features and differences of these methods and expounds the current states and future development trend of ECC methodology. The result shows that further exploration in terms of the dynamic, comprehensive and intelligent assessment technologies needs to be provided in order to form a unified and scientific ECC methodology system and to produce a reliable basis for environmental-economic decision-makings.

  1. Two Stage Fuzzy Methodology to Evaluate the Credit Risks of Investment Projects

    OpenAIRE

    O. Badagadze; G. Sirbiladze; I. Khutsishvili

    2014-01-01

    The work proposes a decision support methodology for the credit risk minimization in selection of investment projects. The methodology provides two stages of projects’ evaluation. Preliminary selection of projects with minor credit risks is made using the Expertons Method. The second stage makes ranking of chosen projects using the Possibilistic Discrimination Analysis Method. The latter is a new modification of a well-known Method of Fuzzy Discrimination Analysis.

  2. Evaluating electronic performance support systems: A methodology focused on future use-in-practice

    NARCIS (Netherlands)

    Collis, Betty; Verwijs, C.A.

    1995-01-01

    Electronic performance support systems, as an emerging type of software environment, present many new challenges in relation to effective evaluation. In this paper, a global approach to a 'usage-orientated' evaluation methodology for software product is presented, followed by a specific example of

  3. Methodologies for environmental, micro- and macro-economic evaluation of bioenergy systems

    NARCIS (Netherlands)

    Broek, R. van den; Wijk, A. van

    2006-01-01

    An overview is given of methodologies used for evaluation of bioenergy systems on envoronmental, micro- and macro-economic spects. To evaluate micro-economic impacts net present value and annualised cost calculation are used. For environmental impacts, methods used are: qualitative studies, energy

  4. Methodologies for evaluating long-term stabilization designs of uranium mill tailings impoundments

    International Nuclear Information System (INIS)

    Nelson, J.D.; Abt, S.R.; Volpe, R.L.; Van Zye, D.; Hinkle, N.E.; Staub, W.P.

    1986-06-01

    Uranium mill tailings impoundments require long-term (200 to 1000 years) stabilization. This report reviews currently available methodologies for evaluating factors that can have a significant influence on tailings stabilization and develops methodologies in technical areas where none presently exist. Mill operators can use these methodologies to assist with (1) the selection of sites for mill tailings impoundments, (2) the design of stable impoundments, and (3) the development of reclamation plans for existing impoundments. These methodologies would also be useful for regulatory agency evaluations of proposals in permit or license applications. Methodologies were reviewed or developed in the following technical areas: (1) prediction of the Probable Maximum Precipitation (PMP) and an accompanying Probable Maximum Flood (PMF); (2) prediction of the stability of local and regional fluvial systems; (3) design of impoundment surfaces resistant to gully erosion; (4) evaluation of the potential for surface sheet erosion; (5) design of riprap for protecting embankments from channel flood flow and overland flow; (6) selection of riprap with appropriate durability for its intended use; and (7) evaluation of oversizing required for marginal quality riprap

  5. Methodology for the evaluation process in the director´s preparation from education.

    Directory of Open Access Journals (Sweden)

    Humberto Clemente Calderón Echevarría

    2014-03-01

    Full Text Available The presented work proposes a methodology oriented to the evaluation of the process of director´s preparation which may contribute to the improvement of the program. It explains the need of the evaluation, activity as such, indicators to evaluate, methods and techniques to be used and the steps in which have to be done. Until now doesn´t exist a methodology which can evaluate the process of directors’ preparation in the educational sector. The development of this methodology has as a background the result obtained by means of different investigations made in the Provincial Post Office and that later were applied in the Provincial Department of Education. Nowadays is perfected in the Pedagogical University "Capitán Silverio Blanco Núñez", thus, the employment opportunities in similar processes of other entities. In the proposed methodology is conceived that the process evaluation of the director’s preparation flows out in a cyclical manner, continuous, flexible, and interactive, away from the traditional linear formula, rigid and schematic. From the above idea it can be identify four stages, and the relevant procedures, the evaluation of the process of directors’ preparation in education.

  6. Application of quality improvement analytic methodology in emergency medicine research: A comparative evaluation.

    Science.gov (United States)

    Harries, Bruce; Filiatrault, Lyne; Abu-Laban, Riyad B

    2018-05-30

    Quality improvement (QI) analytic methodology is rarely encountered in the emergency medicine literature. We sought to comparatively apply QI design and analysis techniques to an existing data set, and discuss these techniques as an alternative to standard research methodology for evaluating a change in a process of care. We used data from a previously published randomized controlled trial on triage-nurse initiated radiography using the Ottawa ankle rules (OAR). QI analytic tools were applied to the data set from this study and evaluated comparatively against the original standard research methodology. The original study concluded that triage nurse-initiated radiographs led to a statistically significant decrease in mean emergency department length of stay. Using QI analytic methodology, we applied control charts and interpreted the results using established methods that preserved the time sequence of the data. This analysis found a compelling signal of a positive treatment effect that would have been identified after the enrolment of 58% of the original study sample, and in the 6th month of this 11-month study. Our comparative analysis demonstrates some of the potential benefits of QI analytic methodology. We found that had this approach been used in the original study, insights regarding the benefits of nurse-initiated radiography using the OAR would have been achieved earlier, and thus potentially at a lower cost. In situations where the overarching aim is to accelerate implementation of practice improvement to benefit future patients, we believe that increased consideration should be given to the use of QI analytic methodology.

  7. Evaluation of the BPMN According to the Requirements of the Enterprise Architecture Methodology

    Directory of Open Access Journals (Sweden)

    Václav Řepa

    2012-04-01

    Full Text Available This article evaluates some characteristics of the Business Process Modelling Notation from the perspective of the business system modelling methodology. Firstly the enterprise architecture context of the business process management as well as the importance of standards are discussed. Then the Business System Modelling Methodology is introduced with special attention paid to the Business Process Meta-model as a basis for the evaluation of the BPMN features. Particular basic concepts from the Business Process Meta-model are mapped to the usable constructs of the BPMN and related issues are analysed. Finally the basic conclusions are made and the general context is discussed.

  8. An integrated methodology for the dynamic performance and reliability evaluation of fault-tolerant systems

    International Nuclear Information System (INIS)

    Dominguez-Garcia, Alejandro D.; Kassakian, John G.; Schindall, Joel E.; Zinchuk, Jeffrey J.

    2008-01-01

    We propose an integrated methodology for the reliability and dynamic performance analysis of fault-tolerant systems. This methodology uses a behavioral model of the system dynamics, similar to the ones used by control engineers to design the control system, but also incorporates artifacts to model the failure behavior of each component. These artifacts include component failure modes (and associated failure rates) and how those failure modes affect the dynamic behavior of the component. The methodology bases the system evaluation on the analysis of the dynamics of the different configurations the system can reach after component failures occur. For each of the possible system configurations, a performance evaluation of its dynamic behavior is carried out to check whether its properties, e.g., accuracy, overshoot, or settling time, which are called performance metrics, meet system requirements. Markov chains are used to model the stochastic process associated with the different configurations that a system can adopt when failures occur. This methodology not only enables an integrated framework for evaluating dynamic performance and reliability of fault-tolerant systems, but also enables a method for guiding the system design process, and further optimization. To illustrate the methodology, we present a case-study of a lateral-directional flight control system for a fighter aircraft

  9. A quality evaluation methodology of health web-pages for non-professionals.

    Science.gov (United States)

    Currò, Vincenzo; Buonuomo, Paola Sabrina; Onesimo, Roberta; de Rose, Paola; Vituzzi, Andrea; di Tanna, Gian Luca; D'Atri, Alessandro

    2004-06-01

    The proposal of an evaluation methodology for determining the quality of healthcare web sites for the dissemination of medical information to non-professionals. Three (macro) factors are considered for the quality evaluation: medical contents, accountability of the authors, and usability of the web site. Starting from two results in the literature the problem of whether or not to introduce a weighting function has been investigated. This methodology has been validated on a specialized information content, i.e., sore throats, due to the large interest such a topic enjoys with target users. The World Wide Web was accessed using a meta-search system merging several search engines. A statistical analysis was made to compare the proposed methodology with the obtained ranks of the sample web pages. The statistical analysis confirms that the variables examined (per item and sub factor) show substantially similar ranks and are capable of contributing to the evaluation of the main quality macro factors. A comparison between the aggregation functions in the proposed methodology (non-weighted averages) and the weighting functions, derived from the literature, allowed us to verify the suitability of the method. The proposed methodology suggests a simple approach which can quickly award an overall quality score for medical web sites oriented to non-professionals.

  10. Methodological Challenges to Economic Evaluations of Vaccines: Is a Common Approach Still Possible?

    Science.gov (United States)

    Jit, Mark; Hutubessy, Raymond

    2016-06-01

    Economic evaluation of vaccination is a key tool to inform effective spending on vaccines. However, many evaluations have been criticised for failing to capture features of vaccines which are relevant to decision makers. These include broader societal benefits (such as improved educational achievement, economic growth and political stability), reduced health disparities, medical innovation, reduced hospital beds pressures, greater peace of mind and synergies in economic benefits with non-vaccine interventions. Also, the fiscal implications of vaccination programmes are not always made explicit. Alternative methodological frameworks have been proposed to better capture these benefits. However, any broadening of the methodology for economic evaluation must also involve evaluations of non-vaccine interventions, and hence may not always benefit vaccines given a fixed health-care budget. The scope of an economic evaluation must consider the budget from which vaccines are funded, and the decision-maker's stated aims for that spending to achieve.

  11. Final report of the accident phenomenology and consequence (APAC) methodology evaluation. Spills Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Brereton, S.; Shinn, J. [Lawrence Livermore National Lab., CA (United States); Hesse, D [Battelle Columbus Labs., OH (United States); Kaninich, D. [Westinghouse Savannah River Co., Aiken, SC (United States); Lazaro, M. [Argonne National Lab., IL (United States); Mubayi, V. [Brookhaven National Lab., Upton, NY (United States)

    1997-08-01

    The Spills Working Group was one of six working groups established under the Accident Phenomenology and Consequence (APAC) methodology evaluation program. The objectives of APAC were to assess methodologies available in the accident phenomenology and consequence analysis area and to evaluate their adequacy for use in preparing DOE facility safety basis documentation, such as Basis for Interim Operation (BIO), Justification for Continued Operation (JCO), Hazard Analysis Documents, and Safety Analysis Reports (SARs). Additional objectives of APAC were to identify development needs and to define standard practices to be followed in the analyses supporting facility safety basis documentation. The Spills Working Group focused on methodologies for estimating four types of spill source terms: liquid chemical spills and evaporation, pressurized liquid/gas releases, solid spills and resuspension/sublimation, and resuspension of particulate matter from liquid spills.

  12. Application of a new methodology to evaluate Dnb limits based on statistical propagation of uncertainties

    International Nuclear Information System (INIS)

    Machado, Marcio Dornellas

    1998-09-01

    One of the most important thermalhydraulics safety parameters is the DNBR (Departure from Nucleate Boiling Ratio). The current methodology in use at Eletronuclear to determine DNBR is extremely conservative and may result in penalties to the reactor power due to an increase plugging level of steam generator tubes. This work uses a new methodology to evaluate DNBR, named mini-RTDP. The standard methodology (STDP) currently in use establishes a limit design value which cannot be surpassed. This limit value is determined taking into account the uncertainties of the empirical correlation used in COBRA IIC/MIT code, modified to Angra 1 conditions. The correlation used is the Westinghouse's W-3 and the minimum DNBR (MDBR) value cannot be less than 1.3. The new methodology reduces the excessive level of conservatism associated with the parameters used in the DNBR calculation, which take most unfavorable values in the STDP methodology, by using their best estimate values. The final goal is to obtain a new DNBR design limit which will provide a margin gain due to more realistic parameters values used in the methodology. (author)

  13. Methodology for evaluating the insect growth regulator (IGR) methoprene incorporated into packaging films

    Science.gov (United States)

    The insect growth regulator methoprene has been impregnated onto various packaging materials to control stored product insects, and is labeled for use in this manner in the United States. Different methodologies were utilized to evaluate efficacy towards Tribolium castaneum (Herbst), the red flour b...

  14. A methodology for evaluating alternative sites for a near-surface radioactive waste repository

    International Nuclear Information System (INIS)

    Watson, S.R.; Brownlow, S.A.

    1986-02-01

    This report addresses the issue of constructing an evaluation procedure for a near-surface radioactive waste repository. It builds on earlier work of the authors, and describes a basis for a practicable methodology for assessing the relative merits of different sites. (author)

  15. Impact Evaluation of Quality Assurance in Higher Education: Methodology and Causal Designs

    Science.gov (United States)

    Leiber, Theodor; Stensaker, Bjørn; Harvey, Lee

    2015-01-01

    In this paper, the theoretical perspectives and general methodological elements of impact evaluation of quality assurance in higher education institutions are discussed, which should be a cornerstone of quality development in higher education and contribute to improving the knowledge about the effectiveness (or ineffectiveness) of quality…

  16. Methodology of site generation for evaluation of the behaviour of radioactive waste storage

    International Nuclear Information System (INIS)

    Ruiz Rivas, C.; Eguilior Diez, S.

    1997-01-01

    The present report summarizes the purpose of methodology for the site generation in the evaluation of high-level radioactive waste storage for long-term. This work is developed into the project Safety analysis long-term of high-level radioactive waste. This project is carried on for CIEMAT and ENRESA

  17. The Research and Evaluation of Serious Games: Toward a Comprehensive Methodology

    Science.gov (United States)

    Mayer, Igor; Bekebrede, Geertje; Harteveld, Casper; Warmelink, Harald; Zhou, Qiqi; van Ruijven, Theo; Lo, Julia; Kortmann, Rens; Wenzler, Ivo

    2014-01-01

    The authors present the methodological background to and underlying research design of an ongoing research project on the scientific evaluation of serious games and/or computer-based simulation games (SGs) for advanced learning. The main research questions are: (1) what are the requirements and design principles for a comprehensive social…

  18. Outcome mapping as methodology to monitor and evaluate community informatics projects: A case study

    CSIR Research Space (South Africa)

    Herselman, M

    2010-10-01

    Full Text Available The purpose of this paper is to indicate how Outcome Mapping (OM) can be used as a methodology to monitor and evaluate a specific developmental informatics project currently under way in the Meraka Institute. OM was applied in the Broadband for All...

  19. Economic Evaluation Methodology Review on KAERI's Recent Projects

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Jin Sam; Kim, Jee Young [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    In technology utilization, economics evaluation is helpful to R and D program managers by giving them economic information needed to improve the usefulness of their projects. Moreover it can help them to communicate to others participants keeping all of them value-oriented minded through the whole development process. In this context, KAERI(Korea Atomic Energy Research Institute) has been performed economic evaluation on recent some projects. So, in this study, it has been made brief reviews on KAERI's economic evaluation methodology to its recent some projects of which evaluation we engage in, especially PEFP(Proton Engineering frontier Project) and SMART(Small Medium advanced ReacTor): Methodology comparison and their pros and cons

  20. A replication and methodological critique of the study "Evaluating drug trafficking on the Tor Network".

    Science.gov (United States)

    Munksgaard, Rasmus; Demant, Jakob; Branwen, Gwern

    2016-09-01

    The development of cryptomarkets has gained increasing attention from academics, including growing scientific literature on the distribution of illegal goods using cryptomarkets. Dolliver's 2015 article "Evaluating drug trafficking on the Tor Network: Silk Road 2, the Sequel" addresses this theme by evaluating drug trafficking on one of the most well-known cryptomarkets, Silk Road 2.0. The research on cryptomarkets in general-particularly in Dolliver's article-poses a number of new questions for methodologies. This commentary is structured around a replication of Dolliver's original study. The replication study is not based on Dolliver's original dataset, but on a second dataset collected applying the same methodology. We have found that the results produced by Dolliver differ greatly from our replicated study. While a margin of error is to be expected, the inconsistencies we found are too great to attribute to anything other than methodological issues. The analysis and conclusions drawn from studies using these methods are promising and insightful. However, based on the replication of Dolliver's study, we suggest that researchers using these methodologies consider and that datasets be made available for other researchers, and that methodology and dataset metrics (e.g. number of downloaded pages, error logs) are described thoroughly in the context of web-o-metrics and web crawling. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. An investigative study towards constructing anthropocentric Man-Machine System design evaluation methodology

    International Nuclear Information System (INIS)

    Yoshikawa, H.; Gofuku, A.; Itoh, T.; Sasaki, K.

    1992-01-01

    A methodological investigation has been conducted for evaluating the reliability of man-machine interaction in the total Man-Machine System (MMS) from the view-point of safety maintenance for emergent situations of nuclear power plant. Basic considerations in our study are: (i) what are the MMS design data to be evaluated, (ii) how are those MMS design data should be treated, and (iii) how the introduction effects of various operator support tools can be evaluated. The methods of both qualitative and quantitative MMS design evaluation are summarized in this paper, with the system architecture based on man-machine interaction simulation and the related cognitive human error factor analysis. (author)

  2. Methodology for evaluating pattern transfer completeness in inkjet printing with irregular edges

    Science.gov (United States)

    Huang, Bo-Cin; Chan, Hui-Ju; Hong, Jian-Wei; Lo, Cheng-Yao

    2016-06-01

    A methodology for quantifying and qualifying pattern transfer completeness in inkjet printing through examining both pattern dimensions and pattern contour deviations from reference design is proposed, which enables scientifically identifying and evaluating inkjet-printed lines, corners, circles, ellipses, and spirals with irregular edges of bulging, necking, and unpredictable distortions resulting from different process conditions. This methodology not only avoids differences in individual perceptions of ambiguous pattern distortions but also indicates the systematic effects of mechanical stresses applied in different directions to a polymer substrate, and is effective for both optical and electrical microscopy in direct and indirect lithography or lithography-free patterning.

  3. Methodology for evaluating pattern transfer completeness in inkjet printing with irregular edges

    International Nuclear Information System (INIS)

    Huang, Bo-Cin; Chan, Hui-Ju; Lo, Cheng-Yao; Hong, Jian-Wei

    2016-01-01

    A methodology for quantifying and qualifying pattern transfer completeness in inkjet printing through examining both pattern dimensions and pattern contour deviations from reference design is proposed, which enables scientifically identifying and evaluating inkjet-printed lines, corners, circles, ellipses, and spirals with irregular edges of bulging, necking, and unpredictable distortions resulting from different process conditions. This methodology not only avoids differences in individual perceptions of ambiguous pattern distortions but also indicates the systematic effects of mechanical stresses applied in different directions to a polymer substrate, and is effective for both optical and electrical microscopy in direct and indirect lithography or lithography-free patterning. (paper)

  4. Environmental and sanitary evaluation of electro-nuclear sites: methodological research and application to prospective scenarios

    International Nuclear Information System (INIS)

    2004-12-01

    In the framework of the radioactive wastes disposal of the law of 1991, an exchange forum constituted by ANDRA, CEA, COGEMA, EdF, Framatome-ANP and IRSN implemented an environmental and sanitary evaluation of the different methods of radioactive wastes management. This report presents the six studies scenarios, the proposed methodology, the application to the six scenarios and the analysis of the results which showed the efficiency of the different recycling options towards the electronuclear cycle impacts limitation, and a technical conclusion illustrated by improvement possibilities of the methodology. (A.L.B.)

  5. Formation of a Methodological Approach to Evaluating the State of Management of Enterprise Flow Processes

    Directory of Open Access Journals (Sweden)

    Dzobko Iryna P.

    2016-02-01

    Full Text Available The formation of a methodological approach to evaluating management of the state of enterprise flow processes has been considered. Proceeding from the developed and presented in literary sources theoretical propositions on organization of management of enterprise flow processes, the hypothesis of the study is correlation of quantitative and qualitative evaluations of management effectiveness and formation of the integral index on their basis. The article presents stages of implementation of a methodological approach to evaluating the state of management of enterprise flow processes, which implies indicating the components, their characteristics and methods of research. The composition of indicators, on the basis of which it is possible to evaluate effectiveness of management of enterprise flow processes, has been determined. Grouping of such indicators based on the flow nature of enterprise processes has been performed. The grouping of indicators is justified by a pairwise determination of canonical correlations between the selected groups (the obtained high correlation coefficients confirmed the author’s systematization of indicators. It is shown that a specificity of the formation of a methodological approach to evaluating the state of management of enterprise flow processes requires expansion in the direction of aggregation of the results and determination of factors that influence effectiveness of flow processes management. The article carries out such aggregation using the factor analysis. Distribution of a set of objects into different classes according to the results of the cluster analysis has been presented. To obtain an integral estimation of effectiveness of flow processes management, the taxonomic index of a multidimensional object has been built. A peculiarity of the formed methodological approach to evaluating the state of management of enterprise flow processes is in the matrix correlation of integral indicators calculated on

  6. Economic evaluation studies in nuclear medicine. A methodological review of the literature

    International Nuclear Information System (INIS)

    Gambhir, S.S.; Schwimmer, J.

    2000-01-01

    The growing need for evaluation of the utility of new nuclear medicine technologies has spawned a few economic studies ranging from preliminary indications of cost savings to complete decision analysis models incorporating costs and quality of life. The objective of the current study was to evaluate the methodological quality of economic analyses of nuclear medicine procedures which targeted cost-effectiveness or cost-utility issues published in the medical literature during the years 1985-1999. A computerized literature search was used to identify original investigations from the medical literature which included an economic analysis of a nuclear medicine procedure. Each economic analysis article was evaluated by two independent reviewers for adherence to ten accepted methodological criteria. Of the 29 articles meeting the search criteria, only six (21%) conformed to all ten methodological criteria. Published economic analyses of nuclear medicine procedures usually do not meet accepted methodological standards and could be significantly improved to achieve overall better quality relative to similar analyses in the literature from other medical fields. Continued improvement in the number and quality of economic studies is critically needed for the future competitiveness of nuclear medicine studies

  7. A study on the proliferation resistance evaluation methodology for nuclear energy system

    International Nuclear Information System (INIS)

    Kim, Min Su

    2007-02-01

    The framework of proliferation resistance evaluation methodology, based on attribute analysis and scenario analysis, for nuclear energy system is suggested in order to allow for the comprehensive assessment of proliferation resistance by addressing the intrinsic and extrinsic features of nuclear energy system. Proliferation resistance is viewed within the context of the success tree model of proliferator's diversion attempt and expressed by the value of top event probability of the success tree model. This study focused on the method that the value of top event is estimated. The methodology uses two different methods to quantify the likelihood of basic events constituting the top event. The likelihood of basic event success affected by intrinsic feature of nuclear energy system was assessed by using multi-attribute utility theory and likelihood of basic event related to the diversion detection measures was assessed by direct expert elicitation. The value of top event was calculated based on the intersection of probabilities of basic event success. Feasibility of the methodology was explored by applying it to selected reference nuclear energy systems. System-Integrated Modular Advanced Reactor (SMART) system and Light Water Reactor (LWR) were chosen as reference systems and the value proliferation resistance of SMART and LWR were evaluated. Characteristics of inherent features and hypothesized safeguards measures of both systems were identified and used as input data to evaluate proliferation resistance. The results and conclusions are applicable only within the context of subjectivity of this methodology

  8. Research on Evaluation Methodology for High Temperature Components and Technical Issues

    International Nuclear Information System (INIS)

    Kim, Y.J.; Han, S.B.

    2007-03-01

    The research on evaluation methodology for high temperature components and technical issues includes the comparison of evaluation technology of Very High Temperature Reactors(VHTRs) with that of present commercial reactors, the review of Hot Gas Duct(HGD) insulation designs, the analysis of the codes related to VHTR component construction and the analysis of technical issues on application of present codes to HGD construction. Codes to assure the integrity of the VHTR components are not fully prepared yet in any country. To understand the evaluation technology of the VHTR-related codes, key requirements of ASME B and PV Code Section III, Subsection NB and NH were compared. Six kinds of HGD designs were reviewed and compared. A reference which analyzed seven kinds of present component codes were reviewed and the limitations of them were summarized. Especially it was found that the selection of materials is limited, material property data are not enough, and design analysis methodology is not fully specified

  9. Design Methodology of a Sensor Network Architecture Supporting Urgent Information and Its Evaluation

    Science.gov (United States)

    Kawai, Tetsuya; Wakamiya, Naoki; Murata, Masayuki

    Wireless sensor networks are expected to become an important social infrastructure which helps our life to be safe, secure, and comfortable. In this paper, we propose design methodology of an architecture for fast and reliable transmission of urgent information in wireless sensor networks. In this methodology, instead of establishing single complicated monolithic mechanism, several simple and fully-distributed control mechanisms which function in different spatial and temporal levels are incorporated on each node. These mechanisms work autonomously and independently responding to the surrounding situation. We also show an example of a network architecture designed following the methodology. We evaluated the performance of the architecture by extensive simulation and practical experiments and our claim was supported by the results of these experiments.

  10. Rationality and irrationality in understanding human behaviour. An evaluation of the methodological consequences of conceptualising irrationality

    Directory of Open Access Journals (Sweden)

    Cosmin Toth

    2013-06-01

    Full Text Available Some of the most known and fertile models for understanding human behaviour are those which rest on the assumption of human rationality. These models have specific strategies for dealing with situations in which understanding human behaviour becomes difficult, i.e. cases of irrationality, and this, in turn, leads to particular methodological consequences. The aim of this article is to illustrate and systematize some of the typical theoretical approaches to the issues of rationality and irrationality and their methodological consequences, while warning, at the same time, against the risks of applying rationality models of a pronounced normative-evaluative nature. A number of important methodological consequences of applying the principle of charity to various degrees of strength are analysed and a taxonomic grid for the different ways of approaching rationality is presented.

  11. COMPARING AND CONTRASTING THE ALTERNATIVE METHODOLOGIES AVAILABLE FOR EVALUATING THE IMPACT OF TOURISM

    Directory of Open Access Journals (Sweden)

    Silvana DJURASEVIC

    2007-06-01

    Full Text Available Tourism has impacts upon a destination country. The aim of this work is to compare and contrast the alternative methodologies available for evaluating the impact of tourism. Tourism can be one of alternatives for development of a destination and sometimes the only possibility. For that reason it is very important to compare benefit and cost that tourism brings with corresponding valyes of alternative investment. Obtained results represent a very important input for planning and also for decision making policy. Different methodologies bring different results, different techniques have their own strenghts and weaknesses. For that reason, depending on the need, it is important to combine the methodologies in order to achieve the maximal benefit and minimal costs, from economical aspect, socio-cultural and environmental development.

  12. Use of cesium-137 methodology in the evaluation of superficial erosive processes

    International Nuclear Information System (INIS)

    Andrello, Avacir Casanova; Appoloni, Carlos Roberto; Guimaraes, Maria de Fatima; Nascimento Filho, Virgilio Franco do

    2003-01-01

    Superficial erosion is one of the main soil degradation agents and erosion rates estimations for different edaphic climate conditions for the conventional models, as USLE and RUSLE, are expensive and time-consuming. The use of cesium- 137 anthropogenic radionuclide is a new methodology that has been much studied and its application in the erosion soil evaluation has grown in countries as USA, UK, Australia and others. A brief narration of this methodology is being presented, as the development of the equations utilized for the erosion rates quantification through the cesium- 137 measurements. Two watersheds studied in Brazil have shown that the cesium- 137 methodology was practicable and coherent with the survey in field for applications in erosion studies. (author)

  13. Methodological Reflections on the Contribution of Qualitative Research to the Evaluation of Clinical Ethics Support Services.

    Science.gov (United States)

    Wäscher, Sebastian; Salloch, Sabine; Ritter, Peter; Vollmann, Jochen; Schildmann, Jan

    2017-05-01

    This article describes a process of developing, implementing and evaluating a clinical ethics support service intervention with the goal of building up a context-sensitive structure of minimal clinical-ethics in an oncology department without prior clinical ethics structure. Scholars from different disciplines have called for an improvement in the evaluation of clinical ethics support services (CESS) for different reasons over several decades. However, while a lot has been said about the concepts and methodological challenges of evaluating CESS up to the present time, relatively few empirical studies have been carried out. The aim of this article is twofold. On the one hand, it describes a process of development, modifying and evaluating a CESS intervention as part of the ETHICO research project, using the approach of qualitative-formative evaluation. On the other hand, it provides a methodological analysis which specifies the contribution of qualitative empirical methods to the (formative) evaluation of CESS. We conclude with a consideration of the strengths and limitations of qualitative evaluation research with regards to the evaluation and development of context sensitive CESS. We further discuss our own approach in contrast to rather traditional consult or committee models. © 2017 John Wiley & Sons Ltd.

  14. A Methodology for Collective Evaluation and Selection of Industrial R&D Projects

    OpenAIRE

    Muhittin Oral; Ossama Kettani; Pascal Lang

    1991-01-01

    This paper proposes a methodology for evaluating and selecting R&D projects in a collective decision setting, especially useful at sectorial and national levels. It consists of two major phases: Evaluation and Selection. The evaluation process repeatedly uses mathematical programming models to determine the "relative values" of a given R&D project from the viewpoint of the other R&D projects. The selection process of R&D projects is based on these "relative values" and is done through a model...

  15. The evaluation of new methodological approaches to lease reporting on the side of lessor

    Directory of Open Access Journals (Sweden)

    Hana Bohušová

    2013-01-01

    Full Text Available Since 2002 the International Accounting Standards Board (IASB and the Financial Accounting Standards Board (FASB has begun significantly cooperate in the development of standards based on the same principles. The cooperation is realised through a series of short term or long term projects. Revenue recognition and lease reporting projects represent priority areas of convergence. The development of methodological approaches for lease reporting on the side of lessee and lessor that would eliminate the main weaknesses of the current system of reporting based on the classification of lease contracts in connection with the lease term and the transfer of risks and benefits associated with the lease to the lessee should be the result of the convergence activity in the area of lease reporting. The evaluation of the impact of the newly proposed methodological approaches to lease reporting in the field of operating leases into the financial statements of lessor that will be affected by this change of methodology (financial position, comprehensive income statement is the main aim of the paper. The impact into selected indicators of financial analysis with a focus on indicators, in whose construction are used items of statements that are significantly affected by the change of the methodological approach is evaluated as well.

  16. Methodological considerations in evaluating a proliferation resistance of innovative nuclear energy systems

    International Nuclear Information System (INIS)

    Kikuchi, Masahiro; Takaki, Naoyuki; Murajiri, Masahiro; Nakagome, Yoshihiro; Tokiwai, Moriyasu

    2004-01-01

    Over 25 years ago, INFCE studied the evaluation methodology of proliferation resistance. Recently, INPRO and GEN-IV coordinated by the IAEA and the USDOE respectively seek an appropriate innovative fuel cycle system for next generation that is furnished safer, sustainable, economical and reliable features. The evaluation methodology of the proliferation resistance is also assigned as an essential part of both studies. The IAEA established and has been strictly implementing the verification measures with accurate material accountancy system from the early of the 1970s in order to detect diversion of plutonium that is individually separated from irradiated nuclear material and recycled as MOX fuel. This paper firstly identifies the impedibility of intrinsic features of innovative fuel cycles and the safeguardability of selected nonproliferation measures as two individual essential parameters for evaluation of a proliferation resistance capability. As a next step, this paper also shows methodological considerations in evaluating the proliferation resistance levels as a multiple model of several clusters that are identified the ability of each parameter. (author)

  17. Deployment evaluation methodology for the electrometallurgical treatment of DOE-EM spent nuclear fuel

    International Nuclear Information System (INIS)

    Dahl, C.A.; Adams, J.P.; Ramer, R.J.

    1998-07-01

    Part of the Department of Energy (DOE) spent nuclear fuel (SNF) inventory may require some type of treatment to meet acceptance criteria at various disposition sites. The current focus for much of this spent nuclear fuel is the electrometallurgical treatment process under development at Argonne National Laboratory. Potential flowsheets for this treatment process are presented. Deployment of the process for the treatment of the spent nuclear fuel requires evaluation to determine the spent nuclear fuel program need for treatment and compatibility of the spent nuclear fuel with the process. The evaluation of need includes considerations of cost, technical feasibility, process material disposition, and schedule to treat a proposed fuel. A siting evaluation methodology has been developed to account for these variables. A work breakdown structure is proposed to gather life-cycle cost information to allow evaluation of alternative siting strategies on a similar basis. The evaluation methodology, while created specifically for the electrometallurgical evaluation, has been written such that it could be applied to any potential treatment process that is a disposition option for spent nuclear fuel. Future work to complete the evaluation of the process for electrometallurgical treatment is discussed

  18. The Researching on Evaluation of Automatic Voltage Control Based on Improved Zoning Methodology

    Science.gov (United States)

    Xiao-jun, ZHU; Ang, FU; Guang-de, DONG; Rui-miao, WANG; De-fen, ZHU

    2018-03-01

    According to the present serious phenomenon of increasing size and structure of power system, hierarchically structured automatic voltage control(AVC) has been the researching spot. In the paper, the reduced control model is built and the adaptive reduced control model is researched to improve the voltage control effect. The theories of HCSD, HCVS, SKC and FCM are introduced and the effect on coordinated voltage regulation caused by different zoning methodologies is also researched. The generic framework for evaluating performance of coordinated voltage regulation is built. Finally, the IEEE-96 stsyem is used to divide the network. The 2383-bus Polish system is built to verify that the selection of a zoning methodology affects not only the coordinated voltage regulation operation, but also its robustness to erroneous data and proposes a comprehensive generic framework for evaluating its performance. The New England 39-bus network is used to verify the adaptive reduced control models’ performance.

  19. Methodology for the economic evaluation of cogeneration/desalination options: A user's manual

    International Nuclear Information System (INIS)

    1997-01-01

    The Methodology for the Economic Evaluation of Cogeneration/Desalination Options is suitable for economic evaluations and screening analyses of various desalination and energy source options. The methodology, based on the spreadsheet, includes simplified models of several types of nuclear/fossil power plants, nuclear/fossil heat sources, and both distillation and membrane desalination plants. Current cost and performance data have already been incorporated so that the spreadsheet can be quickly adapted to analyze a large variety of options with very little new input data required. The spreadsheet output includes the levelized cost of water and power, breakdowns of cost components, energy consumption and net saleable power for each selected option. Specific power plants can be modeled by adjustment of input data including design power, power cycle parameters and costs

  20. Calculation and evaluation methodology of the flawed pipe and the compute program development

    International Nuclear Information System (INIS)

    Liu Chang; Qian Hao; Yao Weida; Liang Xingyun

    2013-01-01

    Background: The crack will grow gradually under alternating load for a pressurized pipe, whereas the load is less than the fatigue strength limit. Purpose: Both calculation and evaluation methodology for a flawed pipe that have been detected during in-service inspection is elaborated here base on the Elastic Plastic Fracture Mechanics (EPFM) criteria. Methods: In the compute, the depth and length interaction of a flaw has been considered and a compute program is developed per Visual C++. Results: The fluctuating load of the Reactor Coolant System transients, the initial flaw shape, the initial flaw orientation are all accounted here. Conclusions: The calculation and evaluation methodology here is an important basis for continue working or not. (authors)

  1. A Methodology for Evaluating the Hygroscopic Behavior of Wood in Adaptive Building Skins using Motion Grammar

    Science.gov (United States)

    El-Dabaa, Rana; Abdelmohsen, Sherif

    2018-05-01

    The challenge in designing kinetic architecture lies in the lack of applying computational design and human computer interaction to successfully design intelligent and interactive interfaces. The use of ‘programmable materials’ as specifically fabricated composite materials that afford motion upon stimulation is promising for low-cost low-tech systems for kinetic facades in buildings. Despite efforts to develop working prototypes, there has been no clear methodological framework for understanding and controlling the behavior of programmable materials or for using them for such purposes. This paper introduces a methodology for evaluating the motion acquired from programmed material – resulting from the hygroscopic behavior of wood – through ‘motion grammar’. Motion grammar typically allows for the explanation of desired motion control in a computationally tractable method. The paper analyzed and evaluated motion parameters related to the hygroscopic properties and behavior of wood, and introduce a framework for tracking and controlling wood as a programmable material for kinetic architecture.

  2. Evaluation methodology for tariff design under escalating penetrations of distributed energy resources

    OpenAIRE

    Abdelmotteleb, I.I.A.; Gómez, Tomás; Reneses, Javier

    2017-01-01

    As the penetration of distributed energy resources (DERs) escalates in distribution networks, new network tariffs are needed to cope with this new situation. These tariffs should allocate network costs to users, promoting an efficient use of the distribution network. This paper proposes a methodology to evaluate and compare network tariff designs. Four design attributes are proposed for this aim: (i) network cost recovery; (ii) deferral of network reinforcements; (iii) efficient consumer resp...

  3. A methodology for the security evaluation within the third-party Android marketplaces

    OpenAIRE

    Buchanan, William J.; Chiale, Simone.; Macfarlane, Richard.

    2017-01-01

    This paper aims to evaluate possible threats with unofficial Android marketplaces, and geo localize the malware distribution over three main regions: China, Europe; and Russia. It provides a comprehensive review of existing academic literature about security in Android focusing especially on malware detection systems and existing malware databases. Through the implementation of a methodology for identification of malicious applications it has been collected data revealing a 5% of them as mali...

  4. Methodology to evaluate the site standard seismic motion for a nuclear facility

    International Nuclear Information System (INIS)

    Soares, W.A.

    1983-03-01

    An overall view of the subjects involved in the determination of the site standard seismic motion to a nuclear facility is presented. The main topics discussed are: basic priciples of seismic instrumentation; dynamic and spectral concepts; design earthquakes definitions; fundamentals of seismology; empirical curves developed from prior seismic data; avalable methodologies and recommended procedures to evaluate the site standard seismic motion. (E.G.) [pt

  5. Methodology for the evaluation of a 4000-home geothermal heat pump retrofit at Fort Polk, Louisiana

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, P.J.; Shonder, J.A.; White, D.L.; Huang, H.L.

    1998-03-01

    The US Army and a private energy service company are developing a comprehensive energy efficiency project to upgrade the family housing at Fort Polk, Louisiana. The project includes converting the space conditioning systems of more than 4,000 housing units to geothermal (or ground-source) heat pumps (GHPs). This interim report describes the methodology of the evaluation associated with this project, including the field monitoring that has been conducted at the base.

  6. A methodology for evaluating land suitability for medicinal plants at a regional level

    Directory of Open Access Journals (Sweden)

    Marco Barbaro

    2011-12-01

    Full Text Available Before introducing a new crop in an area, such as medicinal plant species, crop-land suitability analysis is a prerequisite to achieve an optimum exploitation of the available land resources for a sustainable agricultural production. To evaluate the land suitability it is important to take into account the habitats of the plant species. Moreover, agronomic, logistic and product quality aspects have to be considered. The importance of these aspects changes according to the stakeholders: the local government is more involved in supporting environmental suitability and production sustainability, farmers need areas which satisfy agronomic and logistic requirements, while industry is interested in the quality of production. A methodology was developed and implemented to create suitability maps for medicinal plants. Because of the generally limited information about medicinal plant adaptation, a simple methodology, based on a priori information has been developed, based on three different criteria: i environmental suitability (point of view of local government; ii agronomic, productivity and logistic suitability (point of view of the farmer; iii quality suitability (point of view of industry. For each of the three criteria, a specific macro-indicator, based on land characteristics, was calculated using membership functions. Here, a methodology to create maps for the introduction of such species was developed and implemented. This methodology can be repeated by command scripts in an easy-to-use freeware GIS. The structure of the evaluation model can be easily adapted to consider more detailed land information like climate and soil. The methodology (implemented by scripts in a freeware GIS, can be easily repeated and adapted for other situations.

  7. In Vitro Methodologies to Evaluate the Effects of Hair Care Products on Hair Fiber

    Directory of Open Access Journals (Sweden)

    Robson Miranda da Gama

    2017-01-01

    Full Text Available Consumers use different hair care products to change the physical appearance of their hair, such as shampoos, conditioners, hair dye and hair straighteners. They expect cosmetics products to be available in the market to meet their needs in a broad and effective manner. Evaluating efficacy of hair care products in vitro involves the use of highly accurate equipment. This review aims to discuss in vitro methodologies used to evaluate the effects of hair care products on hair fiber, which can be assessed by various methods, such as Scanning Electron Microscopy, Transmission Electron Microscopy, Atomic Force Microscopy, Optical Coherence Tomography, Infrared Spectroscopy, Raman Spectroscopy, Protein Loss, Electrophoresis, color and brightness, thermal analysis and measuring mechanical resistance to combing and elasticity. The methodology used to test hair fibers must be selected according to the property being evaluated, such as sensory characteristics, determination of brightness, resistance to rupture, elasticity and integrity of hair strain and cortex, among others. If equipment is appropriate and accurate, reproducibility and ease of employment of the analytical methodology will be possible. Normally, the data set must be discussed in order to obtain conclusive answers to the test.

  8. Methodology Development and Applications of Proliferation Resistance and Physical Protection Evaluation

    International Nuclear Information System (INIS)

    Bari, R.A.; Peterson, P.F.; Therios, I.U.; Whitlock, J.J.

    2010-01-01

    We present an overview of the program on the evaluation methodology for proliferation resistance and physical protection (PR and PP) of advanced nuclear energy systems (NESs) sponsored by the Generation IV International Forum (GIF). For a proposed NES design, the methodology defines a set of challenges, analyzes system response to these challenges, and assesses outcomes. The challenges to the NES are the threats posed by potential actors (proliferant States or sub-national adversaries). The characteristics of Generation IV systems, both technical and institutional, are used to evaluate the response of the system and to determine its resistance against proliferation threats and robustness against sabotage and terrorism threats. The outcomes of the system response are expressed in terms of a set of measures, which are the high-level PR and PP characteristics of the NES. The methodology is organized to allow evaluations to be performed at the earliest stages of system design and to become more detailed and more representative as the design progresses. It can thus be used to enable a program in safeguards by design or to enhance the conceptual design process of an NES with regard to intrinsic features for PR and PP.

  9. Methodology for the evaluation of the Stephanie Alexander Kitchen Garden program.

    Science.gov (United States)

    Gibbs, L; Staiger, P K; Townsend, M; Macfarlane, S; Gold, L; Block, K; Johnson, B; Kulas, J; Waters, E

    2013-04-01

    Community and school cooking and gardening programs have recently increased internationally. However, despite promising indications, there is limited evidence of their effectiveness. This paper presents the evaluation framework and methods negotiated and developed to meet the information needs of all stakeholders for the Stephanie Alexander Kitchen Garden (SAKG) program, a combined cooking and gardening program implemented in selectively funded primary schools across Australia. The evaluation used multiple aligned theoretical frameworks and models, including a public health ecological approach, principles of effective health promotion and models of experiential learning. The evaluation is a non-randomised comparison of six schools receiving the program (intervention) and six comparison schools (all government-funded primary schools) in urban and rural areas of Victoria, Australia. A mixed-methods approach was used, relying on qualitative measures to understand changes in school cultures and the experiential impacts on children, families, teachers, parents and volunteers, and quantitative measures at baseline and 1 year follow up to provide supporting information regarding patterns of change. The evaluation study design addressed the limitations of many existing evaluation studies of cooking or garden programs. The multistrand approach to the mixed methodology maintained the rigour of the respective methods and provided an opportunity to explore complexity in the findings. Limited sensitivity of some of the quantitative measures was identified, as well as the potential for bias in the coding of the open-ended questions. The SAKG evaluation methodology will address the need for appropriate evaluation approaches for school-based kitchen garden programs. It demonstrates the feasibility of a meaningful, comprehensive evaluation of school-based programs and also demonstrates the central role qualitative methods can have in a mixed-method evaluation. So what? This paper

  10. Evaluation of probable maximum snow accumulation: Development of a methodology for climate change studies

    Science.gov (United States)

    Klein, Iris M.; Rousseau, Alain N.; Frigon, Anne; Freudiger, Daphné; Gagnon, Patrick

    2016-06-01

    Probable maximum snow accumulation (PMSA) is one of the key variables used to estimate the spring probable maximum flood (PMF). A robust methodology for evaluating the PMSA is imperative so the ensuing spring PMF is a reasonable estimation. This is of particular importance in times of climate change (CC) since it is known that solid precipitation in Nordic landscapes will in all likelihood change over the next century. In this paper, a PMSA methodology based on simulated data from regional climate models is developed. Moisture maximization represents the core concept of the proposed methodology; precipitable water being the key variable. Results of stationarity tests indicate that CC will affect the monthly maximum precipitable water and, thus, the ensuing ratio to maximize important snowfall events. Therefore, a non-stationary approach is used to describe the monthly maximum precipitable water. Outputs from three simulations produced by the Canadian Regional Climate Model were used to give first estimates of potential PMSA changes for southern Quebec, Canada. A sensitivity analysis of the computed PMSA was performed with respect to the number of time-steps used (so-called snowstorm duration) and the threshold for a snowstorm to be maximized or not. The developed methodology is robust and a powerful tool to estimate the relative change of the PMSA. Absolute results are in the same order of magnitude as those obtained with the traditional method and observed data; but are also found to depend strongly on the climate projection used and show spatial variability.

  11. Evaluation of speech errors in Putonghua speakers with cleft palate: a critical review of methodology issues.

    Science.gov (United States)

    Jiang, Chenghui; Whitehill, Tara L

    2014-04-01

    Speech errors associated with cleft palate are well established for English and several other Indo-European languages. Few articles describing the speech of Putonghua (standard Mandarin Chinese) speakers with cleft palate have been published in English language journals. Although methodological guidelines have been published for the perceptual speech evaluation of individuals with cleft palate, there has been no critical review of methodological issues in studies of Putonghua speakers with cleft palate. A literature search was conducted to identify relevant studies published over the past 30 years in Chinese language journals. Only studies incorporating perceptual analysis of speech were included. Thirty-seven articles which met inclusion criteria were analyzed and coded on a number of methodological variables. Reliability was established by having all variables recoded for all studies. This critical review identified many methodological issues. These design flaws make it difficult to draw reliable conclusions about characteristic speech errors in this group of speakers. Specific recommendations are made to improve the reliability and validity of future studies, as well to facilitate cross-center comparisons.

  12. RainMan - A methodology for the evaluation of decommissioning waste

    International Nuclear Information System (INIS)

    Bitetti, B.; Mantero, G.; Orlandi, S.; Scarsi, G.; Brusa, L.; Ruggeri, G.; Dionisi, M.; Farina, A.; Grossi, G.

    2002-01-01

    The main objective of this study, promoted by ANPA, the Italian Nuclear Regulatory Body, carried out with ANSALDO and in close co-operation with SOGIN, was to define a methodology for the evaluation of the inventory of the amount of radioactive waste produced during the NPPs decommissioning activities, in terms of both volume and radioactivity content, and estimate the solid materials suitable for release from the regulatory control. The simulation code RainMan, developed within this project, allows, according to a selected scenario, for the evaluation of the solid materials that could be cleared and the volumes of the L-MLW that should be sent to a disposal facility. (author)

  13. A Methodological Approach to User Evaluation and Assessment of a Virtual Environment Hangout

    Directory of Open Access Journals (Sweden)

    Marco Pasin

    2015-08-01

    Full Text Available Innovation in virtual reality and motion sensing devices is pushing the development of virtual communication platforms towards completely immersive scenarios, which require full user interaction and create complex sensory experiences. This evolution influences user experiences and creates new paradigms for interaction, leading to an increased importance of user evaluation and assessment on new systems interfaces and usability, to validate platform design and development from the users’ point of view. The REVERIE research project aims to develop a virtual environment service for realistic inter-personal interaction. This paper describes the design challenges faced during the development process of user interfaces and the adopted methodological approach to user evaluation and assessment.

  14. An Evaluation Methodology Development and Application Process for Severe Accident Safety Issue Resolution

    Directory of Open Access Journals (Sweden)

    Robert P. Martin

    2012-01-01

    Full Text Available A general evaluation methodology development and application process (EMDAP paradigm is described for the resolution of severe accident safety issues. For the broader objective of complete and comprehensive design validation, severe accident safety issues are resolved by demonstrating comprehensive severe-accident-related engineering through applicable testing programs, process studies demonstrating certain deterministic elements, probabilistic risk assessment, and severe accident management guidelines. The basic framework described in this paper extends the top-down, bottom-up strategy described in the U.S Nuclear Regulatory Commission Regulatory Guide 1.203 to severe accident evaluations addressing U.S. NRC expectation for plant design certification applications.

  15. Instrumentation and control upgrade evaluation methodology: Final report. Volume 2: Workbook

    Energy Technology Data Exchange (ETDEWEB)

    Bliss, M.; Brown, E.; Florio, F.; Stofko, M.

    1996-07-01

    This workbook accompanies the methodology manual (EPRI TR-104963-V1) which describes how to develop an Upgrade Evaluation Report (UER). A UER is an evaluation that is performed by a nuclear power plant to decide the most cost-effective upgrade to perform (if any) for a previously identified Upgrade Candidate System. A UER defines the utility`s mission and objectives in regards to upgrade candidates, as well as the systems initial costs, benefits to each upgrade, and an initial upgrade schedule to cost-effectively implement system upgrades.

  16. A replication and methodological critique of the study "Evaluating drug trafficking on the Tor Network"

    DEFF Research Database (Denmark)

    Munksgaard, Rasmus; Demant, Jakob Johan; Branwen, Gwern

    2016-01-01

    The development of cryptomarkets has gained increasing attention from academics, including growing scientific literature on the distribution of illegal goods using cryptomarkets. Dolliver's 2015 article “Evaluating drug trafficking on the Tor Network: Silk Road 2, the Sequel” addresses this theme...... by evaluating drug trafficking on one of the most well-known cryptomarkets, Silk Road 2.0. The research on cryptomarkets in general—particularly in Dolliver's article—poses a number of new questions for methodologies. This commentary is structured around a replication of Dolliver's original study...

  17. A methodology for the evaluation of the collective dose from radioactivity in terrestrial food chains

    International Nuclear Information System (INIS)

    Simmonds, J.R.; Linsley, G.S.

    1980-02-01

    A methodology is described for the evaluation of the collective dose from radioactivity in the terrestrial food chains. It involves the use of an agricultural grid for Great Britain from which the geographical distribution of each of the main cereal, vegetable, fruit and animal products around any given point can be evaluated. A description is given of the procedure by which the grid was assembled. The use of the grid is demonstrated in an example in which the collective doses associated with the milk pathway to man following the routine discharge to air of iodine-131 are compared for two coastal sites in markedly different agricultural regions. (author)

  18. Uncertainty Evaluation of a Postulated LBLOCA for APR+ using KINS Realistic Evaluation Methodology and MARS-KS

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Min Jeong; Marigomena, Ralph; Yoo, Tae Ho; Kim, Y. S.; Sim, S. K. [Environment and Energy Technology, Inc., Daejeon (Korea, Republic of); Bang, Young Seok [KINS, Daejeon (Korea, Republic of)

    2014-05-15

    As a part of the regulatory safety research, Korea Institute of Nuclear Safety(KINS) also developed a best estimate safety analysis regulatory audit code, MARS-KS, to realistically predict and better understand the physical phenomena of the design basis accidents. KINS improved uncertainty propagation methodology using MARS-KS and applied the improved uncertainty evaluation method for the Shinkori Units 3 and 4 LBLOC. This study is to evaluate the uncertainty propagation of a postulated LBLOCA and quantify the safety margin using KINS-REM and MARS-KS code for the APR+ (Advanced Pressurizer Reactor Plus) Standard Safety Analysis Report(SSAR) which is under regulatory review by the KINS for its design approval. KINS-REM LBLOCA realistic evaluation methodology was used for the regulatory assessment of the APR+ LBLOCA using MARS-KS to evaluate the uncertainty propagation of the uncertainty variables as well as to assess the safety margin during the limiting case of the APR+ double ended guillotine cold leg LBLOCA. Uncertainty evaluation for the APR+ LBLOCA shows that the reflood PCT with upper limit of 95% probability at 95% confidence level is 1363.2 K and is higher than the blowdown PCT95/95 of 1275.3 K. The result shows that the current evaluation of APR+ LBLOCA PCT is within the acceptance criteria of 1477 K ECCS.

  19. A review of methodologies applied in Australian practice to evaluate long-term coastal adaptation options

    Directory of Open Access Journals (Sweden)

    Timothy David Ramm

    2017-01-01

    Full Text Available Rising sea levels have the potential to alter coastal flooding regimes around the world and local governments are beginning to consider how to manage uncertain coastal change. In doing so, there is increasing recognition that such change is deeply uncertain and unable to be reliably described with probabilities or a small number of scenarios. Characteristics of methodologies applied in Australian practice to evaluate long-term coastal adaptation options are reviewed and benchmarked against two state-of-the-art international methods suited for conditions of uncertainty (Robust Decision Making and Dynamic Adaptive Policy Pathways. Seven out of the ten Australian case studies assumed the uncertain parameters, such as sea level rise, could be described deterministically or stochastically when identifying risk and evaluating adaptation options across multi-decadal periods. This basis is not considered sophisticated enough for long-term decision-making, implying that Australian practice needs to increase the use of scenarios to explore a much larger uncertainty space when assessing the performance of adaptation options. Two Australian case studies mapped flexible adaptation pathways to manage uncertainty, and there remains an opportunity to incorporate quantitative methodologies to support the identification of risk thresholds. The contextual framing of risk, including the approach taken to identify risk (top-down or bottom-up and treatment of uncertain parameters, were found to be fundamental characteristics that influenced the methodology selected to evaluate adaptation options. The small sample of case studies available suggests that long-term coastal adaptation in Australian is in its infancy and there is a timely opportunity to guide local government towards robust methodologies for developing long-term coastal adaptation plans.

  20. Economic evaluation of nurse practitioner and clinical nurse specialist roles: A methodological review.

    Science.gov (United States)

    Lopatina, Elena; Donald, Faith; DiCenso, Alba; Martin-Misener, Ruth; Kilpatrick, Kelley; Bryant-Lukosius, Denise; Carter, Nancy; Reid, Kim; Marshall, Deborah A

    2017-07-01

    Advanced practice nurses (e.g., nurse practitioners and clinical nurse specialists) have been introduced internationally to increase access to high quality care and to tackle increasing health care expenditures. While randomised controlled trials and systematic reviews have demonstrated the effectiveness of nurse practitioner and clinical nurse specialist roles, their cost-effectiveness has been challenged. The poor quality of economic evaluations of these roles to date raises the question of whether current economic evaluation guidelines are adequate when examining their cost-effectiveness. To examine whether current guidelines for economic evaluation are appropriate for economic evaluations of nurse practitioner and clinical nurse specialist roles. Our methodological review was informed by a qualitative synthesis of four sources of information: 1) narrative review of literature reviews and discussion papers on economic evaluation of advanced practice nursing roles; 2) quality assessment of economic evaluations of nurse practitioner and clinical nurse specialist roles alongside randomised controlled trials; 3) review of guidelines for economic evaluation; and, 4) input from an expert panel. The narrative literature review revealed several challenges in economic evaluations of advanced practice nursing roles (e.g., complexity of the roles, variability in models and practice settings where the roles are implemented, and impact on outcomes that are difficult to measure). The quality assessment of economic evaluations of nurse practitioner and clinical nurse specialist roles alongside randomised controlled trials identified methodological limitations of these studies. When we applied the Guidelines for the Economic Evaluation of Health Technologies: Canada to the identified challenges and limitations, discussed those with experts and qualitatively synthesized all findings, we concluded that standard guidelines for economic evaluation are appropriate for economic

  1. The Desired Image of the Future Economy of the Industrial Region: Development Trends and Evaluation Methodology

    Directory of Open Access Journals (Sweden)

    Olga Aleksandrovna Romanova

    2017-09-01

    Full Text Available In the article, the authors emphasize that industrial regions play an important role in the increasing of technological independence of Russia. We show that the decline in the share of processing industries in the gross regional product can not be treated as a negative de-industrialization of the economy. The article proves that the increase in the speed of changements, instability of socio-economic systems, the diverse risks predetermine the need to develop new methodological approaches to predictive research. The studies aimed at developing a technology for the design of the desired image of the future and the methodology for its evaluation are of high importance. For the initial stage of the research, the authors propose the methodological approach for assessing the desired image of the future of metallurgy as one of the most important industry of the region. We propose the term of «technological image of the regional metallurgy». We show that repositioning the image of the regional metallurgical complex is quite a long process. This have determined the need to define the stages of repositioning. The proposed methodology of the evaluation of desired future includes the methodological provisions to quantify the characteristics of goals achieved at the respective stages of the repositioning of the metallurgy. The methodological approach to the design of the desired image of the future implies the following stages: the identification of the priority areas of the technological development of regional metallurgy on the basis of bibliometric and patent analysis; the evaluation of dynamics of the development of the structure of metal products domestic consumption based on comparative analysis and relevant analytical methods as well as its forecasting; the design of the factor model, allowing to identify the parameters quantifying the technological image of the regional metallurgy based on the principal components method,; systematization of

  2. A methodology which facilitated the evaluation of learning in a mass university course for basic calculus

    Directory of Open Access Journals (Sweden)

    Patricia Villalonga de García

    2005-03-01

    Full Text Available The aim of the present work is to introduce the methodology used to carry out a diagnostic of the system of evaluation in learning for Mathematics I (subject of the first year in the Facultad de Bioquímica, Química y Farmacia of the Universidad Nacional of Tucumán in Argentina This diagnostic was based on a model of alternative evaluation of learning, designed on the basis of criteria resulting from constructivist pedagogical currents and on the basis of methodological principles for the qualitative and quantitative paradigms in socioeducational research. The criteria stated in this model led to the formulation of the hypothesis: “the evaluation of learning in the subject is enhanced with a reductionistic and disintegrated conception of the processes of teaching and learning”. In order to contrast it, surveys were designed which were applied to students in years 2001 and 2003 and to teachers in year 2001, and a study was carried out on the items of summative evaluation of the subject based on the principles of evaluation standards of the National Council of Teachers of Mathematics. The sources of information were chosen by attending to the characteristics of the context of work and the limitations which conditioned the investigation. A technique was designed to analyze the open and close questions of the surveys and to study the items of the exams. This facilitated the elaboration of a system of categories with which the diagnostic was implemented. The methodological design adopted and the sources used were adequate to reach the aims proposed in the study. Besides, they provided the means to find solid argumentations to contrast the hypotheses of work.

  3. Obtention to the methodology for evaluation to the confirmation of the hazardous wastes safety isolation

    International Nuclear Information System (INIS)

    Peralta, J.L.; Gil, R.; Castillo, R.; Leyva, D.

    2003-01-01

    Taking into account, the practical experience of the safety assessment in the radioactive wastes management, the International Atomic Energy Agency (IAEA) recommendations in this topics, the norms and national and international legislation about noxious substances to the environment and their restriction limits, the best international practices and approaches of isolation hazardous wastes sites, a Methodology is developed (Cuba particular conditions) to obtaining and/or confirmation of the hazardous wastes safety isolation, as a tool able to carry out the assessment of facilities to build and all installation and/or place where hazardous wastes isolated from the environment. The Methodology, embraces the evaluation of technical, economic and social topics, allowing to develop an integral safety assessment which allows to estimate the environment possible impact for hazardous waste isolation (radioactive and non radioactive); Just are shown in this paper the selection approaches for the obtaining and/or evaluation of the best site, the steps description to continue for the definition of the main scenarios and the models to take into account in the valuation of the possible liberation and pathway to the environment of the non radioactive pollutants. The main contribution of this Methodology resides in the creation of a scientific-technique necessary guide for the evident demand of carrying out the most organized, effective and hazardous wastes safety management

  4. Evaluating the statistical methodology of randomized trials on dentin hypersensitivity management.

    Science.gov (United States)

    Matranga, Domenica; Matera, Federico; Pizzo, Giuseppe

    2017-12-27

    The present study aimed to evaluate the characteristics and quality of statistical methodology used in clinical studies on dentin hypersensitivity management. An electronic search was performed for data published from 2009 to 2014 by using PubMed, Ovid/MEDLINE, and Cochrane Library databases. The primary search terms were used in combination. Eligibility criteria included randomized clinical trials that evaluated the efficacy of desensitizing agents in terms of reducing dentin hypersensitivity. A total of 40 studies were considered eligible for assessment of quality statistical methodology. The four main concerns identified were i) use of nonparametric tests in the presence of large samples, coupled with lack of information about normality and equality of variances of the response; ii) lack of P-value adjustment for multiple comparisons; iii) failure to account for interactions between treatment and follow-up time; and iv) no information about the number of teeth examined per patient and the consequent lack of cluster-specific approach in data analysis. Owing to these concerns, statistical methodology was judged as inappropriate in 77.1% of the 35 studies that used parametric methods. Additional studies with appropriate statistical analysis are required to obtain appropriate assessment of the efficacy of desensitizing agents.

  5. Bayesian methodology for generic seismic fragility evaluation of components in nuclear power plants

    International Nuclear Information System (INIS)

    Yamaguchi, Akira; Campbell, R.D.; Ravindra, M.K.

    1991-01-01

    Bayesian methodology for updating the seismic fragility of components in nuclear power plants is presented. The generic fragility data which have been evaluated based on the past SPSAs are combined with the seismic experience data. Although the seismic experience is limited to the acceleration range below the median capacity of the components, it has been found that the evidence is effective to update the fragility tail. In other words, the uncertainty of the fragility is reduced although the median capacity itself is not modified to a great extent. The annual frequency of failure is also reduced as a result of the updating of the fragility tail. The PDF of the seismic capacity is handled in discrete form, which enables the use of arbitrary type of prior distribution. Accordingly, the Log-N prior can be used which is consistent with the widely used fragility model. For evaluating posterior fragility parameters (A m and B U ), two methods have been proposed. Furthermore, it has been found that the importance of evidence used in the Bayesian methodology can be quantified by the entropy of the evidence. Only the events with high entropy need to be considered in the Bayesian updating of the fragility. The currently available seismic experience database for typical components can be utilized to develop the fragility tail which is contributive to the seismically-induced failure frequency. The combined use of generic fragility and seismic experience data, with the aid of Bayesian methodology, provides refined generic fragility curves which are useful for SPSA studies. (author)

  6. Evaluating the effects of the Dietary Guidelines for Americans on consumer behavior and health: methodological challenges.

    Science.gov (United States)

    Guthrie, Joanne F; Smallwood, David M

    2003-12-01

    The Dietary Guidelines for Americans is the official nutrition policy statement for the United States. Government involvement in providing information on private behavior, such as food choice, is justified by the high cost of poor diets, as measured in medical expenses and lost productivity. The Guidelines are intended to provide an up-to-date, consistent information base for federal nutrition education and information efforts and food assistance program regulations. Through these policy mechanisms, the Guidelines are assumed to improve dietary behavior, and, ultimately, health. By law, the Dietary Guidelines for Americans must be updated every five years; however, there is no mandate for evaluation. Evaluation could provide useful information to assess the extent to which the Guidelines positively influence health and provide insights into reasons for their successes and limitations. However, evaluation would also present considerable challenges. This paper discusses the critical data and methodological needs for improving evaluation of the Dietary Guidelines for Americans.

  7. A new methodology for the evaluation of the J-R curve

    International Nuclear Information System (INIS)

    Donoso, J. R.; Zahr, J.; Landes, J. D.

    2005-01-01

    A new methodology for the construction of J-R curves for ductile materials, based upon the analytical integration of the P-ν relation, is presented. This method is based on the Common and Concise Formats, and on a postulated crack growth law, that relates the amount of stable crack growth with plastic displacement. The model developed, denoted asnC and C, reproduces quite well the experimentally obtained P-ν, Δa-ν and J-Δa curves. The results suggest that the amount of stable crack growth in a ductile material follows a power-law behaviour in its dependence with plastic displacement. This methodology may be used to evaluate instability conditions, through the adequate analytical treatment of the P-ν and J-Δa relations. (Author) 35 refs

  8. Methodology to extract of humic substances of lombricompost and evaluation of their performance

    International Nuclear Information System (INIS)

    Torrente Trujillo, Armando; Gomez Zambrano, Jairo

    1995-01-01

    The present works was developed at the facultad de ciencias agropecuarias of the Universidad Nacional de Colombia, located in Palmira City Valle del Cauca. The research consisted in the development of the appropriate methodology to extract humic substances contained in lombricompost and on the other hand to evaluate the performance in organic carbon of the fulvic and humic acids. The lombricompost source consisted in organic matter such as: dug cow, filter press cake, coffee pulp and Paspalum notatum with and without application of lime. The results showed sixteen steps, which are completely described in the work, obtain the proposal methodology. By the other hand this method showed that humic acids in the lombricompost are richer than fulvic ones; besides among the four sources used in the experiment the filter press cake was different and higher in carbon yield than coffee pulp and Paspalum notatum

  9. Proposal for an Experimental Methodology for Evaluation of Natural Lighting Systems Applied in Buildings

    Directory of Open Access Journals (Sweden)

    Anderson Diogo Spacek

    2017-07-01

    Full Text Available This work has the objective of developing a methodology for the evaluation of indoor natural lighting systems, which, with speed and practicality, provides from real conditions of use a reliable result about the quality and performance of the proposed system. The methodology is based on the construction of two real-size test environments, which will be subjected to a natural light system through reflexive tubes made from recycled material, and to a commercial system already certified and consolidated, creating the possibility of comparison. Furthermore, the data acquired in the test environments will be examined in light of the values of solar radiation obtained from a digital meteorological station, such that it is possible to stipulate the lighting capacity of the systems at different times of the year.

  10. Methodology for the economic evaluation of the strategies for spent fuel

    International Nuclear Information System (INIS)

    Zouain, D.M.

    1981-08-01

    A methodology for the economic evaluation of the spent fuel and a comparative analysis of the various available strategies for its treatment, is developed. For the realization of the proposed studies a computer program METACIR was developed, which incorporates the necessary computational methodology, and it was performed a analysis of the present situation and future tendencies of the stages that constitute a PWR nuclear fuel cycle. According to the obtained results, the eternal disposal of the spent fuel is less advantageous than the reprocessing and recycle options; between the last options, the uranium recycle in PWR's is the most attractive until nearly the end of the 1990's, when the uranium and plutonium recycle in LMFBR's becomes the most convenient. The economic value of the spent fuel varies with the reactor discharge date, being considered a onus during the 1980's, and a bonus only in the next decade. (Author) [pt

  11. The Society for Implementation Research Collaboration Instrument Review Project: a methodology to promote rigorous evaluation.

    Science.gov (United States)

    Lewis, Cara C; Stanick, Cameo F; Martinez, Ruben G; Weiner, Bryan J; Kim, Mimi; Barwick, Melanie; Comtois, Katherine A

    2015-01-08

    Identification of psychometrically strong instruments for the field of implementation science is a high priority underscored in a recent National Institutes of Health working meeting (October 2013). Existing instrument reviews are limited in scope, methods, and findings. The Society for Implementation Research Collaboration Instrument Review Project's objectives address these limitations by identifying and applying a unique methodology to conduct a systematic and comprehensive review of quantitative instruments assessing constructs delineated in two of the field's most widely used frameworks, adopt a systematic search process (using standard search strings), and engage an international team of experts to assess the full range of psychometric criteria (reliability, construct and criterion validity). Although this work focuses on implementation of psychosocial interventions in mental health and health-care settings, the methodology and results will likely be useful across a broad spectrum of settings. This effort has culminated in a centralized online open-access repository of instruments depicting graphical head-to-head comparisons of their psychometric properties. This article describes the methodology and preliminary outcomes. The seven stages of the review, synthesis, and evaluation methodology include (1) setting the scope for the review, (2) identifying frameworks to organize and complete the review, (3) generating a search protocol for the literature review of constructs, (4) literature review of specific instruments, (5) development of an evidence-based assessment rating criteria, (6) data extraction and rating instrument quality by a task force of implementation experts to inform knowledge synthesis, and (7) the creation of a website repository. To date, this multi-faceted and collaborative search and synthesis methodology has identified over 420 instruments related to 34 constructs (total 48 including subconstructs) that are relevant to implementation

  12. Methodology for worker neutron exposure evaluation in the PDCF facility design

    International Nuclear Information System (INIS)

    Scherpelz, R. I.; Traub, R. J.; Pryor, K. H.

    2004-01-01

    A project headed by Washington Group International is meant to design the Pit Disassembly and Conversion Facility (PDCF) to convert the plutonium pits from excessed nuclear weapons into plutonium oxide for ultimate disposition. Battelle staff are performing the shielding calculations that will determine appropriate shielding so that the facility workers will not exceed target exposure levels. The target exposure levels for workers in the facility are 5 mSv y -1 for the whole body and 100 mSv y -1 for the extremity, which presents a significant challenge to the designers of a facility that will process tons of radioactive material. The design effort depended on shielding calculations to determine appropriate thickness and composition for glove box walls, and concrete wall thicknesses for storage vaults. Pacific Northwest National Laboratory (PNNL) staff used ORIGEN-S and SOURCES to generate gamma and neutron source terms, and Monte Carlo (computer code for) neutron photon (transport) (MCNP-4C) to calculate the radiation transport in the facility. The shielding calculations were performed by a team of four scientists, so it was necessary to develop a consistent methodology. There was also a requirement for the study to be cost-effective, so efficient methods of evaluation were required. The calculations were subject to rigorous scrutiny by internal and external reviewers, so acceptability was a major feature of the methodology. Some of the issues addressed in the development of the methodology included selecting appropriate dose factors, developing a method for handling extremity doses, adopting an efficient method for evaluating effective dose equivalent in a non-uniform radiation field, modelling the reinforcing steel in concrete, and modularising the geometry descriptions for efficiency. The relative importance of the neutron dose equivalent compared with the gamma dose equivalent varied substantially depending on the specific shielding conditions and lessons were

  13. The Evaluation of Innovation in the IT Service Sector: Methodological and Empirical Aspects

    Directory of Open Access Journals (Sweden)

    Eglė Kazlauskienė

    2013-08-01

    Full Text Available Purpose — Nowadays services are comprehended as the key factor for economic activity, growth and employment. Developed economies are service-dominated though little is known about the innovation details in the service sector and this study field has been neglected for a while. The innovation in service sector activities needs to be thoroughly evaluated because innovation is an interconnected process and cannot be defined using one or few indicators. IT services are an integral part of contemporary life, particularly for business. It can be introduced and implemented in all fields, especially when the world is becoming more multidimensional. Innovation performance in the IT sector has been under-researched, despite the fact that IT service sector plays the innovation disseminator role in other sectors by appliance of IT products. Design/methodology/approach — Based on scientific literature and methodological aspects analyses, an empirical research methodology was designed and the qualitative research on innovation in information technology service sector was accomplished. Findings — The article presents methodological aspects of innovation evaluation in service sector and empirical aspects on innovation implementation and development in the IT service companies in Lithuania. Research limitations/implications — For more comprehensive understanding of innovation in service sector, especially in IT services, the theory of service innovation is necessary. Deeper understanding and perspectives on how innovation benefits the information technology sector should be revealed in further researches and the multi-country analysis is needed. Practical implications — The finding of the paper can be used to improve the development of innovation in information technology service companies and create a model for more exhaustive multi-country empirical researches. Originality/value — The impact of innovation and its development in information

  14. Time-to-event methodology improved statistical evaluation in register-based health services research.

    Science.gov (United States)

    Bluhmki, Tobias; Bramlage, Peter; Volk, Michael; Kaltheuner, Matthias; Danne, Thomas; Rathmann, Wolfgang; Beyersmann, Jan

    2017-02-01

    Complex longitudinal sampling and the observational structure of patient registers in health services research are associated with methodological challenges regarding data management and statistical evaluation. We exemplify common pitfalls and want to stimulate discussions on the design, development, and deployment of future longitudinal patient registers and register-based studies. For illustrative purposes, we use data from the prospective, observational, German DIabetes Versorgungs-Evaluation register. One aim was to explore predictors for the initiation of a basal insulin supported therapy in patients with type 2 diabetes initially prescribed to glucose-lowering drugs alone. Major challenges are missing mortality information, time-dependent outcomes, delayed study entries, different follow-up times, and competing events. We show that time-to-event methodology is a valuable tool for improved statistical evaluation of register data and should be preferred to simple case-control approaches. Patient registers provide rich data sources for health services research. Analyses are accompanied with the trade-off between data availability, clinical plausibility, and statistical feasibility. Cox' proportional hazards model allows for the evaluation of the outcome-specific hazards, but prediction of outcome probabilities is compromised by missing mortality information. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. Methodological proposal for evaluating and selecting environment al indicators, Case: Chachafruto Stream Basin, Rionegro, Antioquia, Colombia

    International Nuclear Information System (INIS)

    Osorio Velez, Luis Fernando; Pineda Correa, Marcelena

    2000-01-01

    The investigation mainly responds to the necessity of developing a methodology that allows getting indicators to make easier the process of making decisions in the environmental administration field. The elaboration was relied on the support of the Corporacion Autonoma Regional Rionegro - Nare CORNARE in Antioquia - Colombia, through a subscribed agreement between this entity and the authors. The development of the investigation was carried out in two parts: the first involves the search of methodological paths for the evaluation and selection of applicable indicators to basins, Through the creation of parameters that allow qualifying these indicators in direct form; this is followed by a statistical treatment that allows selecting indicators in a rational way. For application purposes, some criterions are defined in a such way that the selected indicators can be evaluated; with these criterions the matrix is constructed; this allows to view and qualify the indicators, starting from ranges and scales previously defined; once the evaluation and qualification matrix are carried out, the selection process is begun from multivariate analysis. The second part consists in the methodology application expounded to a pattern of indicators previously defined and a determined territory (Basin of the Chachafruto Stream, Rionegro - Antioquia - Colombia); starting from the listing of the whole reported indicators in the consulted literature, the ability of themselves to reflex the basin problems is analyzed, based on parameters such as local contextualization and focuses of the topic. Once the first selection is done, the indicators are submitted to the qualification and evaluation matrix and its results are analyzed by multivariate analysis, in order to condense the environmental indicators to be used. Subsequently, for the evaluation of selected indicators, it is necessary to compile diverse thematic information and to identify the existent databases for the select territory

  16. FFT-BM, Code Accuracy Evaluations with the 1D Fast Fourier Transform (FFT) Methodology

    International Nuclear Information System (INIS)

    D'Auria, F.

    2004-01-01

    1 - Description of program or function: FFT-BM is an integrated version of the programs package performing code accuracy evaluations with the 1D Fast Fourier Transform (FFT) methodology. It contains two programs: - CASEM: Takes care of the complete manipulation of data in order to evaluate the quantities through which the FFT method quantifies the code accuracy. - AAWFTO completes the evaluation of the average accuracy (AA) and related weighted frequency (WF) values in order to obtain the AAtot and WFtot values characterising the global calculation performance. 2 - Methods: The Fast Fourier Transform, or FFT, which is based on the Fourier analysis method is an optimised method for calculating the amplitude Vs frequency, of functions or experimental or computed data. In order to apply this methodology, after selecting the parameters to be analyzed, it is necessary to choose the following parameters: - number of curves (exp + calc) to be analyzed; - number of time windows to be analyzed; - sampling frequency; - cut frequency; - time begin and time end of each time window. 3 - Restrictions on the complexity of the problem: Up to 30 curves (exp + calc) and 5 time windows may be analyzed

  17. Current status and future directions of development of PR/PP evaluation methodology

    International Nuclear Information System (INIS)

    Kim, D. Y.; Kwon, E. H.; Kim, H. D.

    2012-01-01

    A mandatory design requirement for the introduction of generation IV nuclear energy systems (NESs) is defined as the characteristic of a nuclear energy system that impedes the diversion or undeclared production of nuclear material, or misuse of technology, by State in order to acquire nuclear weapons or other nuclear explosive devices. The same report also defines physical protection (PP) as the use of technical, administrative, and operational measures to prevent the theft of nuclear/radioactive material for the purpose of producing nuclear weapons, producing nuclear devices for nuclear terrorism, or using the facility or transportation system for radiological sabotage. Since the early 1970s right after the Indian nuclear test, the international community has recognized the limits of political and diplomatic means to prevent overt proliferation by states and looked for ways to incorporate technical features that are inherent in NESs. As a first step, active research has been conducted to develop a methodology to evaluate PR and PP components of NESs and has now been reduced to two main R and D streams: the Generation IV International Forum (GIF) and International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). (Currently, GIF and INPRO are leading the debate as major projects for PR and PP evaluation methods.) This paper presents an overview of the R and D accomplishments during the development of PR and PP evaluation methodology. It also suggests some directions for future research

  18. Current status and future directions of development of PR/PP evaluation methodology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, D. Y.; Kwon, E. H.; Kim, H. D. [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    A mandatory design requirement for the introduction of generation IV nuclear energy systems (NESs) is defined as the characteristic of a nuclear energy system that impedes the diversion or undeclared production of nuclear material, or misuse of technology, by State in order to acquire nuclear weapons or other nuclear explosive devices. The same report also defines physical protection (PP) as the use of technical, administrative, and operational measures to prevent the theft of nuclear/radioactive material for the purpose of producing nuclear weapons, producing nuclear devices for nuclear terrorism, or using the facility or transportation system for radiological sabotage. Since the early 1970s right after the Indian nuclear test, the international community has recognized the limits of political and diplomatic means to prevent overt proliferation by states and looked for ways to incorporate technical features that are inherent in NESs. As a first step, active research has been conducted to develop a methodology to evaluate PR and PP components of NESs and has now been reduced to two main R and D streams: the Generation IV International Forum (GIF) and International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). (Currently, GIF and INPRO are leading the debate as major projects for PR and PP evaluation methods.) This paper presents an overview of the R and D accomplishments during the development of PR and PP evaluation methodology. It also suggests some directions for future research.

  19. New evaluation methodology of regenerative braking contribution to energy efficiency improvement of electric vehicles

    International Nuclear Information System (INIS)

    Qiu, Chengqun; Wang, Guolin

    2016-01-01

    Highlights: • Two different contribution ratio evaluation parameters according to the deceleration braking process are proposed. • Methodologies for calculating the contribution made by regenerative brake to improve vehicle energy efficiency are proposed. • Road test results imply that the proposed parameters are effective. - Abstract: Comprehensive research is conducted on the design and control of a regenerative braking system for electric vehicles. The mechanism and evaluation methods of contribution brought by regenerative braking to improve electric vehicle’s energy efficiency are discussed and analyzed by the energy flow. Methodologies for calculating the contribution made by regenerative brake are proposed. Additionally a new regenerative braking control strategy called “serial 2 control strategy” is introduced. Moreover, two control strategies called “parallel control strategy” and “serial 1 control strategy” are proposed as the comparative control strategy. Furthermore, two different contribution ratio evaluation parameters according to the deceleration braking process are proposed. Finally, road tests are carried out under China typical city regenerative driving cycle standard with three different control strategies. The serial 2 control strategy offers considerably higher regeneration efficiency than the parallel strategy and serial 1 strategy.

  20. Methodology for evaluating gloves in relation to the effects on hand performance capabilities: a literature review.

    Science.gov (United States)

    Dianat, Iman; Haslegrave, Christine M; Stedmon, Alex W

    2012-01-01

    The present study was conducted to review the literature on the methods that have been considered appropriate for evaluation of the effects of gloves on different aspects of hand performance, to make recommendations for the testing and assessment of gloves, and to identify where further research is needed to improve the evaluation protocols. Eighty-five papers meeting the criteria for inclusion were reviewed. Many studies show that gloves may have negative effects on manual dexterity, tactile sensitivity, handgrip strength, muscle activity and fatigue and comfort, while further research is needed to determine glove effects on pinch strength, forearm torque strength and range of finger and wrist movements. The review also highlights several methodological issues (including consideration of both task type and duration of glove use by workers, guidance on the selection and allocation of suitable glove(s) for particular tasks/jobs, and glove design features) that need to be considered in future research. Practitioner Summary: The relevant literature on the effects of protective gloves on different aspects of hand performance was reviewed to make recommendations for the testing and assessment of gloves, and to improve evaluation protocols. The review highlights research areas and methodological issues that need to be considered in future research.

  1. Development of methodology for evaluating and monitoring steam generator feedwater nozzle cracking in PWRs

    International Nuclear Information System (INIS)

    Shvarts, S.; Gerber, D.A.; House, K.; Hirschberg, P.

    1994-01-01

    The objective of this paper is to describe a methodology for evaluating and monitoring steam generator feedwater nozzle cracking in PWR plants. This methodology is based in part on plant test data obtained from a recent Diablo Canyon Power Plant (DCPP) Unit 1 heatup. Temperature sensors installed near the nozzle-to-pipe weld were monitored during the heatup, along with operational parameters such as auxiliary feedwater (AFW) flow rate and steam generator temperature. A thermal stratification load definition was developed from this data. Steady state characteristics of this data were used in a finite element analysis to develop relationship between AFW flow and stratification interface level. Fluctuating characteristics of this data were used to determine transient parameters through the application of a Green's Function approach. The thermal stratification load definition from the test data was used in a three-dimensional thermal stress analysis to determine stress cycling and consequent fatigue damage or crack growth during AFW flow fluctuations. The implementation of the developed methodology in the DCPP and Sequoyah Nuclear Plant (SNP) fatigue monitoring systems is described

  2. A methodology for evaluating environmental impacts of railway freight transportation policies

    International Nuclear Information System (INIS)

    Lopez, Ignacio; Rodriguez, Javier; Buron, Jose Manuel; Garcia, Alberto

    2009-01-01

    Railway freight transportation presents a degree of complexity which frequently makes impossible to model it with sufficient precision. Currently, energetic and environmental impacts of freight transportation are usually modelled following average data, which do not reflect the characteristics of specific lines. These models allow qualitative approximations which may be used as criteria for designing high-level transportation policies: road-train modal shift, regional energetic planning or environmental policies. This paper proposes a methodology for estimating railway consumption associated to a specific railway line which yields a new degree of precision. It is based on estimating different contributions to railway consumption by a collection of factors, mobility, operation, or infrastructure-related. This procedure also allows applying the methodology for designing transportation policies in detail: evaluating impact of modal shift, consumption and pollutant emissions on a specific line, as well as the effect of building tunnels, reducing slopes, improving traffic control, etc. A comparison of the estimations given by the conventional approach and the proposed methodology is offered, as well as further comments on the results.

  3. Methodology for evaluation of environmental impact of radioactive waste storage systems

    International Nuclear Information System (INIS)

    Peres, Sueli da Silva; Rochedo, Elaine R.R.

    2005-01-01

    The Biosphere has an important role in the assessment of the long-term environmental impact of radioactive waste disposal systems. This is because the biosphere is dynamic and its evolution over time can significantly affect the dose estimates and potential environmental impacts of a repository. Future events that may occur in the biosphere, such as climate change and the human actions, are the main sources of uncertainty in the modeling of the biosphere, and consequently, in anticipation of the scenarios of human exposure to radiation. In this context, the use of an alternative methodology more detailed and systematic for the development of conceptual models and prediction of uncertainty has been shown to be a useful tool to improve the quality of the evaluation. This methodology indicates the components and phenomena inherent to waste, design and location of the storage installation that need to be identified during the development of the conceptual model and the selection of the computer code to be used to represent the model. This methodology has been applied in assessing the long-term safety of radioactive waste storage systems. This paper presents the advantages of using this approach in the development of conceptual models and in the treatment of uncertainties

  4. A methodology for the evaluation of global warming impact on soil moisture and runoff

    International Nuclear Information System (INIS)

    Valdes, J.B.; Seoane, R.S.; North, G.R.

    1993-01-01

    Global warming is expected to increase the intensity of the global hydrologic cycle. Precipitation and temperature patterns, soil moisture requirements, and the physical structure of the vegetation canopy play important roles in the hydrologic system of drainage basins. Changes in these phenomena, because of a buildup Of CO 2 and other trace gases, have the potential to affect the quantity, quality, timing, and spatial distribution of water available to satisfy the many demands placed on the resource by society. In this work a methodology for the evaluation of impact on soil moisture concentration and direct surface runoff is presented. The methodology integrates stochastic models of hydroclimatic input variables with a model of water balance in the soil. This allows the derivation of the probability distribution of soil moisture concentration and direct surface runoff for different combinations of climate and soil characteristics, ranging from humid to semi-arid and arid. These PDFs asses, in a comprehensive manner, the impact that climate change have on soil moisture and runoff and allow the water resources planner to make more educated decisions in the planning and design of water resources systems. The methodology was applied to three sites in Texas. To continue in the line of research suggested by Delworth and Manabe the authors computed the autocorrelation function (ACF) and the spectra of both precipitation inputs and soil moisture concentration outputs for all scenarios of climate change

  5. Small punch creep test: A promising methodology for high temperature plant components life evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Tettamanti, S. [CISE SpA, Milan (Italy); Crudeli, R. [ENEL SpA, Milan (Italy)

    1998-12-31

    CISE and ENEL are involved for years in a miniaturization creep methodology project to obtain similar non-destructive test with the same standard creep test reliability. The goal can be reached with `Small punch creep test` that collect all the requested characteristics; quasi nondestructive disk specimens extracted both on external or internal side of components, than accurately machined and tested on little and cheap apparatus. CISE has developed complete creep small punch procedure that involved peculiar test facility and correlation`s law comparable with the more diffused isostress methodology for residual life evaluation on ex-serviced high temperature plant components. The aim of this work is to obtain a simple and immediately applicable relationship useful for plant maintenance managing. More added work is need to validate the Small Punch methodology and for relationship calibration on most diffusion high temperature structural materials. First obtained results on a comparative work on ASTM A355 P12 ex-serviced pipe material are presented joint with a description of the Small Punch apparatus realized in CISE. (orig.) 6 refs.

  6. Small punch creep test: A promising methodology for high temperature plant components life evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Tettamanti, S [CISE SpA, Milan (Italy); Crudeli, R [ENEL SpA, Milan (Italy)

    1999-12-31

    CISE and ENEL are involved for years in a miniaturization creep methodology project to obtain similar non-destructive test with the same standard creep test reliability. The goal can be reached with `Small punch creep test` that collect all the requested characteristics; quasi nondestructive disk specimens extracted both on external or internal side of components, than accurately machined and tested on little and cheap apparatus. CISE has developed complete creep small punch procedure that involved peculiar test facility and correlation`s law comparable with the more diffused isostress methodology for residual life evaluation on ex-serviced high temperature plant components. The aim of this work is to obtain a simple and immediately applicable relationship useful for plant maintenance managing. More added work is need to validate the Small Punch methodology and for relationship calibration on most diffusion high temperature structural materials. First obtained results on a comparative work on ASTM A355 P12 ex-serviced pipe material are presented joint with a description of the Small Punch apparatus realized in CISE. (orig.) 6 refs.

  7. From SNOMED CT to Uberon: Transferability of evaluation methodology between similarly structured ontologies.

    Science.gov (United States)

    Elhanan, Gai; Ochs, Christopher; Mejino, Jose L V; Liu, Hao; Mungall, Christopher J; Perl, Yehoshua

    2017-06-01

    To examine whether disjoint partial-area taxonomy, a semantically-based evaluation methodology that has been successfully tested in SNOMED CT, will perform with similar effectiveness on Uberon, an anatomical ontology that belongs to a structurally similar family of ontologies as SNOMED CT. A disjoint partial-area taxonomy was generated for Uberon. One hundred randomly selected test concepts that overlap between partial-areas were matched to a same size control sample of non-overlapping concepts. The samples were blindly inspected for non-critical issues and presumptive errors first by a general domain expert whose results were then confirmed or rejected by a highly experienced anatomical ontology domain expert. Reported issues were subsequently reviewed by Uberon's curators. Overlapping concepts in Uberon's disjoint partial-area taxonomy exhibited a significantly higher rate of all issues. Clear-cut presumptive errors trended similarly but did not reach statistical significance. A sub-analysis of overlapping concepts with three or more relationship types indicated a much higher rate of issues. Overlapping concepts from Uberon's disjoint abstraction network are quite likely (up to 28.9%) to exhibit issues. The results suggest that the methodology can transfer well between same family ontologies. Although Uberon exhibited relatively few overlapping concepts, the methodology can be combined with other semantic indicators to expand the process to other concepts within the ontology that will generate high yields of discovered issues. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Performance evaluation of CT measurements made on step gauges using statistical methodologies

    DEFF Research Database (Denmark)

    Angel, J.; De Chiffre, L.; Kruth, J.P.

    2015-01-01

    In this paper, a study is presented in which statistical methodologies were applied to evaluate the measurement of step gauges on an X-ray computed tomography (CT) system. In particular, the effects of step gauge material density and orientation were investigated. The step gauges consist of uni......- and bidirectional lengths. By confirming the repeatability of measurements made on the test system, the number of required scans in the design of experiment (DOE) was reduced. The statistical model was checked using model adequacy principles; model adequacy checking is an important step in validating...

  9. A methodology for financial evaluation of biogas technology in India using cost functions

    International Nuclear Information System (INIS)

    Rubab, S.; Kandpal, T.C.

    1996-01-01

    A methodology for financial evaluation of biogas technology for domestic use in India using recently developed cost functions is reported. Analytical expressions for the unit cost of biogas and cost per unit of useful energy delivered by a biogas plant in combination with other suitable technologies have been developed. Net present value and discounted pay-back period have been calculated. The sensitivity of the unit cost of biogas, the cost per unit of useful energy, and the net present value with respect to a number of variables is also reported. (author)

  10. Performance of neutron activation analysis in the evaluation of bismuth iodide purification methodology

    International Nuclear Information System (INIS)

    Armelin, Maria Jose A.; Ferraz, Caue de Mello; Hamada, Margarida M.

    2015-01-01

    Bismuth tri-iodide (BrI 3 ) is an attractive material for using as a semiconductor. In this paper, BiI 3 crystals have been grown by the vertical Bridgman technique using commercially available powder. The impurities were evaluated by instrumental neutron activation analysis (INAA). The results show that INAA is an analytical method appropriate for monitoring the impurities of: Ag, As, Br, Cr, K, Mo, Na and Sb in the various stages of the BiI 3 purification methodology. (author)

  11. An integrated methodology to evaluate a spent nuclear fuel storage system

    International Nuclear Information System (INIS)

    Yoon, Jeong Hyoun

    2008-02-01

    This study introduced a methodology that can be applied for development of a dry storage system for spent nuclear fuels. It consisted of several design activities that includes development of a simplified program to analyze the amount of spent nuclear fuels from reflecting the practical situation in spent nuclear fuel management and a simplified program to evaluate the cost of 4 types of representing storage system to choose the most competitive option considering economic factor. As verification of the implementation of the reference module to practical purpose, a simplified thermal analysis code was suggested that can see fulfillment of limitation of temperature in long term storage and oxidation analysis. From the thermal related results, the reference module can accommodate full range of PHWR spent nuclear fuels and significant portion of PWR ones too. From the results, the reference storage system can be concluded that has fulfilled the important requirements in terms of long term integrity and radiological safety. Also for the purpose of solving scattered radiation along with deep penetration problems in cooling storage system, small but efficient design alternation was suggested together with its efficiency that can reduce scattered radiation by 1/3 from the original design. Along with the countermeasure for the shielding problem, in consideration of PWR spent nuclear fuels, simplified criticality analysis methodology retaining conservativeness was proposed. The results show the reference module is efficient low enrichment PWR spent nuclear fuel and even relatively high enrichment fuels too if burnup credit is taken. As conclusive remark, the methodology is simple but efficient to plan a concept design of convective cooling type of spent nuclear fuels storage. It can be also concluded that the methodology derived in this study and the reference module has feasibility in practical implementation to mitigate the current complex situation in spent fuel

  12. Research methodology workshops evaluation using the Kirkpatrick's model: translating theory into practice.

    Science.gov (United States)

    Abdulghani, Hamza Mohammad; Shaik, Shaffi Ahamed; Khamis, Nehal; Al-Drees, Abdulmajeed Abdulrahman; Irshad, Mohammad; Khalil, Mahmoud Salah; Alhaqwi, Ali Ibrahim; Isnani, Arthur

    2014-04-01

    Qualitative and quantitative evaluation of academic programs can enhance the development, effectiveness, and dissemination of comparative quality reports as well as quality improvement efforts. To evaluate the five research methodology workshops through assessing participants' satisfaction, knowledge and skills gain and impact on practices by the Kirkpatrick's evaluation model. The four level Kirkpatrick's model was applied for the evaluation. Training feedback questionnaires, pre and post tests, learner development plan reports and behavioral surveys were used to evaluate the effectiveness of the workshop programs. Of the 116 participants, 28 (24.1%) liked with appreciation, 62 (53.4%) liked with suggestions and 26 (22.4%) disliked the programs. Pre and post MCQs tests mean scores showed significant improvement of relevant basic knowledge and cognitive skills by 17.67% (p ≤ 0.005). Pre-and-post tests scores on workshops sub-topics also significantly improved for the manuscripts (p ≤ 0.031) and proposal writing (p ≤ 0.834). As for the impact, 56.9% of participants started research, and 6.9% published their studies. The results from participants' performance revealed an overall positive feedback and 79% of participant reported transfer of training skills at their workplace. The course outcomes achievement and suggestions given for improvements offer insight into the program which were encouraging and very useful. Encouraging "research culture" and work-based learning are probably the most powerful determinants for research promotion. These findings therefore encourage faculty development unit to continue its training and development in the research methodology aspects.

  13. Modeling companion diagnostics in economic evaluations of targeted oncology therapies: systematic review and methodological checklist.

    Science.gov (United States)

    Doble, Brett; Tan, Marcus; Harris, Anthony; Lorgelly, Paula

    2015-02-01

    The successful use of a targeted therapy is intrinsically linked to the ability of a companion diagnostic to correctly identify patients most likely to benefit from treatment. The aim of this study was to review the characteristics of companion diagnostics that are of importance for inclusion in an economic evaluation. Approaches for including these characteristics in model-based economic evaluations are compared with the intent to describe best practice methods. Five databases and government agency websites were searched to identify model-based economic evaluations comparing a companion diagnostic and subsequent treatment strategy to another alternative treatment strategy with model parameters for the sensitivity and specificity of the companion diagnostic (primary synthesis). Economic evaluations that limited model parameters for the companion diagnostic to only its cost were also identified (secondary synthesis). Quality was assessed using the Quality of Health Economic Studies instrument. 30 studies were included in the review (primary synthesis n = 12; secondary synthesis n = 18). Incremental cost-effectiveness ratios may be lower when the only parameter for the companion diagnostic included in a model is the cost of testing. Incorporating the test's accuracy in addition to its cost may be a more appropriate methodological approach. Altering the prevalence of the genetic biomarker, specific population tested, type of test, test accuracy and timing/sequence of multiple tests can all impact overall model results. The impact of altering a test's threshold for positivity is unknown as it was not addressed in any of the included studies. Additional quality criteria as outlined in our methodological checklist should be considered due to the shortcomings of standard quality assessment tools in differentiating studies that incorporate important test-related characteristics and those that do not. There is a need to refine methods for incorporating the characteristics

  14. Proposal of a method for evaluating tsunami risk using response-surface methodology

    Science.gov (United States)

    Fukutani, Y.

    2017-12-01

    Information on probabilistic tsunami inundation hazards is needed to define and evaluate tsunami risk. Several methods for calculating these hazards have been proposed (e.g. Løvholt et al. (2012), Thio (2012), Fukutani et al. (2014), Goda et al. (2015)). However, these methods are inefficient, and their calculation cost is high, since they require multiple tsunami numerical simulations, therefore lacking versatility. In this study, we proposed a simpler method for tsunami risk evaluation using response-surface methodology. Kotani et al. (2016) proposed an evaluation method for the probabilistic distribution of tsunami wave-height using a response-surface methodology. We expanded their study and developed a probabilistic distribution of tsunami inundation depth. We set the depth (x1) and the slip (x2) of an earthquake fault as explanatory variables and tsunami inundation depth (y) as an object variable. Subsequently, tsunami risk could be evaluated by conducting a Monte Carlo simulation, assuming that the generation probability of an earthquake follows a Poisson distribution, the probability distribution of tsunami inundation depth follows the distribution derived from a response-surface, and the damage probability of a target follows a log normal distribution. We applied the proposed method to a wood building located on the coast of Tokyo Bay. We implemented a regression analysis based on the results of 25 tsunami numerical calculations and developed a response-surface, which was defined as y=ax1+bx2+c (a:0.2615, b:3.1763, c=-1.1802). We assumed proper probabilistic distribution for earthquake generation, inundation height, and vulnerability. Based on these probabilistic distributions, we conducted Monte Carlo simulations of 1,000,000 years. We clarified that the expected damage probability of the studied wood building is 22.5%, assuming that an earthquake occurs. The proposed method is therefore a useful and simple way to evaluate tsunami risk using a response

  15. Methodologies for evaluation of ingestive behavior of heifers supplemented in grazing

    Directory of Open Access Journals (Sweden)

    Hermógenes Almeida de Santana Junior

    2014-06-01

    Full Text Available The study was conducted to compare different methodologies for evaluation of ingestive behavior of heifers supplemented in grazing. The experiment was conducted at Princesa do Mateiro farm, Ribeirao do Largo, Bahia. Were used 30 heifers with blood level 5/8 Guzera milk lineage and 3/8 Holstein, with an average of 18 months of age and body weight of 187 ± 13.1 kg. The treatments were: Duration of avaliation (24, 12 and eight hours of observation intervals (10, 20 and 30 minutes; repetitions for observation (three, two and one shifts of observation (two and one. The behavior evaluation was performed on day 25th, 26th, 27th and 28th of each period, then a total of four ratings. The percentage of grazing activity on the duration of 8h and 12h evaluation differed from the standard evaluation period of 24 hours (P0.05. For grazing time, rumination, feeding at the trough, other activities, total feeding and total chewing have not been verified statistical differences between the ranges of observations 20 and 30 minutes compared with 10 minutes (P<0.05. The duration of evaluation of 24 hours is recommended for evaluation of ingestive behavior in terms of nutritional and metabolic parameters, as other promote distortion of the data as a function of the intensity of activities throughout the day.

  16. Development of an Evaluation Methodology for Loss of Large Area induced from extreme events

    International Nuclear Information System (INIS)

    Kim, Sok Chul; Park, Jong Seuk; Kim, Byung Soon; Jang, Dong Ju; Lee, Seung Woo

    2015-01-01

    USNRC announced several regulatory requirements and guidance documents regarding the event of loss of large area including 10CFR 50.54(hh), Regulatory Guide 1.214 and SRP 19.4. In Korea, consideration of loss of large area has been limitedly taken into account for newly constructing NPPs as voluntary based. In general, it is hardly possible to find available information on methodology and key assumptions for the assessment of LOLA due to 'need to know based approach'. Urgent needs exists for developing country specific regulatory requirements, guidance and evaluation methodology by themselves with the consideration of their own geographical and nuclear safety and security environments. Currently, Korea Hydro and Nuclear Power Company (KHNP) has developed an Extended Damage Mitigation Guideline (EDMG) for APR1400 under contract with foreign consulting company. The submittal guidance NEI 06-12 related to B.5.b Phase 2 and 3 focused on unit-wise mitigation strategy instead of site level mitigation or response strategy. Phase 1 mitigating strategy and guideline for LOLA (Loss of Large Area) provides emphasis on site level arrangement including cooperative networking outside organizations and agile command and control system. Korea Institute of Nuclear Safety has carried out a pilot in-house research project to develop the methodology and guideline for evaluation of LOLA since 2014. This paper introduces the summary of major results and outcomes of the aforementioned research project. After Fukushima Dai-Ichi accident, the awareness on countering the event of loss of large area induced from extreme man-made hazards or extreme beyond design basis external event. Urgent need exists to develop regulatory guidance for coping with this undesirable situation, which has been out of consideration at existing nuclear safety regulatory framework due to the expectation of rare possibility of occurrence

  17. Study of adolescents exposed in utero. Methodological evaluation of the Nagasaki sample

    Energy Technology Data Exchange (ETDEWEB)

    Hrubec, Zdenek, Noble, K.B.; Burrow, G N

    1962-09-12

    Fetal tissues have been shown to be extremely sensitive to ionizing radiation, and therefore a group of children who were exposed in utero are of special interest. When these children entered adolescence, an intensive study was undertaken to determine whether differences not otherwise apparent would be revealed during the stress of this period of rapid growth. The purpose of this report is to describe the sample used to study these adolescent children who were exposed in utero and to provide reference information. The problems of using ex post facto methods as employed in this study have been discussed in detail elsewhere. In summary, the extent to which findings of a retrospective study may be generalized to a larger population can be determined only from a careful and extensive study of the characteristics of the sample and an evaluation of the procedures used in its selection. It is generally recognized that even an extensive methodologic exploration of this kind offers no conclusive proof that a sample is useful for a specific study. In the sample, some variables which may have a considerable effect on the medical data, such as socioeconomic status, have been taken into account only superficially. There is always the possibility that some important, completely unsuspected variables may produce spurious associations. However there is an almost infinite number of such factors which might conceivably affect the data. Vast research resources could be committed to a methodologic evaluation without fulfilling the basic purpose of the study. An approach must be devised which is judged methodologically adequate but which will not tax the research resource to the detriment of the basic objectives. It is hoped that this report will satisfy the requirements of this compromise. 30 references, 36 tables.

  18. Study to improve recriticality evaluation methodology after severe accident (Joint research)

    International Nuclear Information System (INIS)

    Kugo, Teruhiko; Ishikawa, Makoto; Nagaya, Yasunobu; Yokoyama, Kenji; Fukaya, Yuji; Maruyama, Hiromi; Kondo, Takao; Minato, Hirokazu; Tsuchiya, Akiyuki; Ishii, Yoshihiko; Fujimura, Koji

    2014-03-01

    The present report summarizes the results of a 2-year cooperative study between JAEA and Hitachi-GE Nuclear Energy in order to contribute to the settlement of the Fukushima-Daiich nuclear power plants which suffered from the severe accident on March 2011. In the Fukushima-Daiich plants, it is considered that the nuclear fuel in the core was melted down by the loss of ultimate heat sink by the station black out after the 2011 off the Pacific coast of Tohoku Earthquake. The position and/or the mass of the melted fuel have not been known yet. Therefore, the possibility of recriticality events and the severity of the postulated recriticality are uncertain. In the present study, the possible scenarios to reach the recriticality events in Fukushima-Daiich were investigated first. Then, the analytical methodology to evaluate the time-dependent recriticality events has been developed by modelling the reactivity insertion rate and the possible feedback according to the recriticality scenarios identified in the first step. The methodology developed here has been equipped as a transient simulation tool, PORCAS, which is operated on a multi-purpose platform for reactor analysis, MARBLE. Finally, the radiation exposure rates by the postulated recriticality events in Fukushima-Daiich were approximately evaluated to estimate the impact to the public environment. (author)

  19. Evaluation of Structural Robustness against Column Loss: Methodology and Application to RC Frame Buildings.

    Science.gov (United States)

    Bao, Yihai; Main, Joseph A; Noh, Sam-Young

    2017-08-01

    A computational methodology is presented for evaluating structural robustness against column loss. The methodology is illustrated through application to reinforced concrete (RC) frame buildings, using a reduced-order modeling approach for three-dimensional RC framing systems that includes the floor slabs. Comparisons with high-fidelity finite-element model results are presented to verify the approach. Pushdown analyses of prototype buildings under column loss scenarios are performed using the reduced-order modeling approach, and an energy-based procedure is employed to account for the dynamic effects associated with sudden column loss. Results obtained using the energy-based approach are found to be in good agreement with results from direct dynamic analysis of sudden column loss. A metric for structural robustness is proposed, calculated by normalizing the ultimate capacities of the structural system under sudden column loss by the applicable service-level gravity loading and by evaluating the minimum value of this normalized ultimate capacity over all column removal scenarios. The procedure is applied to two prototype 10-story RC buildings, one employing intermediate moment frames (IMFs) and the other employing special moment frames (SMFs). The SMF building, with its more stringent seismic design and detailing, is found to have greater robustness.

  20. Development of an Evaluation Methodology for Triple Bottom Line Reports Using International Standards on Reporting

    Science.gov (United States)

    Skouloudis, Antonis; Evangelinos, Konstantinos; Kourmousis, Fotis

    2009-08-01

    The purpose of this article is twofold. First, evaluation scoring systems for triple bottom line (TBL) reports to date are examined and potential methodological weaknesses and problems are highlighted. In this context, a new assessment methodology is presented based explicitly on the most widely acknowledged standard on non-financial reporting worldwide, the Global Reporting Initiative (GRI) guidelines. The set of GRI topics and performance indicators was converted into scoring criteria while the generic scoring devise was set from 0 to 4 points. Secondly, the proposed benchmark tool was applied to the TBL reports published by Greek companies. Results reveal major gaps in reporting practices, stressing the need for the further development of internal systems and processes in order to collect essential non-financial performance data. A critical overview of the structure and rationale of the evaluation tool in conjunction with the Greek case study is discussed while recommendations for future research on the field of this relatively new form of reporting are suggested.

  1. Wind Energy Development in India and a Methodology for Evaluating Performance of Wind Farm Clusters

    Directory of Open Access Journals (Sweden)

    Sanjeev H. Kulkarni

    2016-01-01

    Full Text Available With maturity of advanced technologies and urgent requirement for maintaining a healthy environment with reasonable price, India is moving towards a trend of generating electricity from renewable resources. Wind energy production, with its relatively safer and positive environmental characteristics, has evolved from a marginal activity into a multibillion dollar industry today. Wind energy power plants, also known as wind farms, comprise multiple wind turbines. Though there are several wind-mill clusters producing energy in different geographical locations across the world, evaluating their performance is a complex task and is an important focus for stakeholders. In this work an attempt is made to estimate the performance of wind clusters employing a multicriteria approach. Multiple factors that affect wind farm operations are analyzed by taking experts opinions, and a performance ranking of the wind farms is generated. The weights of the selection criteria are determined by pairwise comparison matrices of the Analytic Hierarchy Process (AHP. The proposed methodology evaluates wind farm performance based on technical, economic, environmental, and sociological indicators. Both qualitative and quantitative parameters were considered. Empirical data were collected through questionnaire from the selected wind farms of Belagavi district in the Indian State of Karnataka. This proposed methodology is a useful tool for cluster analysis.

  2. Preliminary Evaluation Methodology of ECCS Performance for Design Basis LOCA Redefinition

    International Nuclear Information System (INIS)

    Kang, Dong Gu; Ahn, Seung Hoon; Seul, Kwang Won

    2010-01-01

    To improve their existing regulations, the USNRC has made efforts to develop the risk-informed and performance-based regulation (RIPBR) approaches. As a part of these efforts, the rule revision of 10CFR50.46 (ECCS Acceptance Criteria) is underway, considering some options for 4 categories of spectrum of break sizes, ECCS functional reliability, ECCS evaluation model, and ECCS acceptance criteria. Since the potential for safety benefits and unnecessary burden reduction from design basis LOCA redefinition is high relative to other options, the USNRC is proceeding with the rulemaking for design basis LOCA redefinition. An instantaneous break with a flow rate equivalent to a double ended guillotine break (DEGB) of the largest primary piping system in the plant is widely recognized as an extremely unlikely event, while redefinition of design basis LOCA can affect the existing regulatory practices and approaches. In this study, the status of the design basis LOCA redefinition and OECD/NEA SMAP (Safety Margin Action Plan) methodology are introduced. Preliminary evaluation methodology of ECCS performance for LOCA is developed and discussed for design basis LOCA redefinition

  3. Development of an evaluation methodology for triple bottom line reports using international standards on reporting.

    Science.gov (United States)

    Skouloudis, Antonis; Evangelinos, Konstantinos; Kourmousis, Fotis

    2009-08-01

    The purpose of this article is twofold. First, evaluation scoring systems for triple bottom line (TBL) reports to date are examined and potential methodological weaknesses and problems are highlighted. In this context, a new assessment methodology is presented based explicitly on the most widely acknowledged standard on non-financial reporting worldwide, the Global Reporting Initiative (GRI) guidelines. The set of GRI topics and performance indicators was converted into scoring criteria while the generic scoring devise was set from 0 to 4 points. Secondly, the proposed benchmark tool was applied to the TBL reports published by Greek companies. Results reveal major gaps in reporting practices, stressing the need for the further development of internal systems and processes in order to collect essential non-financial performance data. A critical overview of the structure and rationale of the evaluation tool in conjunction with the Greek case study is discussed while recommendations for future research on the field of this relatively new form of reporting are suggested.

  4. Qualification program of the ASTRID SFR project: definition, methodology and associated risk evaluation and management - 15093

    International Nuclear Information System (INIS)

    Rodriguez, G.; Dirat, J.F.; Traina, A.; Christofari, M.

    2015-01-01

    The Preconceptual Design phase of the ASTRID French Sodium Fast Reactor project had the objective to integrate innovative options to meet the requirements of the 4. generation reactors and to comply with the related specifications. It was followed by the conceptual phase studies (AVP2 phase 2013-2015) where some technical options are left opened with an advanced option and a backup alternative. In the same time of the AVP2 phase studies, the qualification program related to ASTRID project was initiated. It consists in collecting the exhaustive list of research/development (R/D) needs and technological demonstration tests to be fulfilled on representative mockup prior to component implementation in the prototype. The ASTRID Qualification Program (AQP) objectives are to collect needs expressed by all engineering companies involved in ASTRID, and then to organize the answer to this expression of needs. This significant work of needs compilation has been divided in several tasks, according to the ASTRID project decomposition in the Product Breakdown Structure (PBS). Compilation of needs was jointly performed by engineering company, R/D responsible and coordinated by the ASTRID Qualification project responsible. It was associated with an evaluation of the maturity level of the technical options thanks to a Technological Readiness Level grid (TRL ranking table), an identification of major risks, and an evaluation of the R/D potentiality and associated facility platform. The methodology applied for the ASTRID Qualification Program (AQP) is presented. It is explained what methodology was used associated to the TRL process, and how is managed the associated risk analysis evaluation: evaluation of major risks, definition of a risk portfolio and a corresponding Action Plan for risk reduction (synthesized under the REM acronym: Risk Evaluation and Management). This methodology is a mean used to facilitate ASTRID risk-informed decision making, technology qualification and

  5. Development of a methodology for the evaluation of radiation protection performance and management in nuclear power plants

    International Nuclear Information System (INIS)

    Schieber, Caroline; Bataille, Celine; Cordier, Gerard; Delabre, Herve; Jeannin, Bernard

    2008-01-01

    This paper describes a specific methodology adopted by Electricite de France to perform the evaluation of radiation protection performance and management within its 19 nuclear power plants. The results obtained in 2007 are summed up. (author)

  6. EVALUATION OF RELATIVE GEOMETRIC ACCURACY OF TERRASAR-X BY PIXEL MATCHING METHODOLOGY

    Directory of Open Access Journals (Sweden)

    T. Nonaka

    2016-06-01

    Full Text Available Recently, high-resolution commercial SAR satellites with several meters of resolutions are widely utilized for various applications and disaster monitoring is one of the commonly applied areas. The information about the flooding situation and ground displacement was rapidly announced to the public after the Great East Japan Earthquake 2011. One of the studies reported the displacement in Tohoku region by the pixel matching methodology using both pre- and post- event TerraSAR-X data, and the validated accuracy was about 30 cm at the GEONET reference points. In order to discuss the spatial distribution of the displacement, we need to evaluate the relative accuracy of the displacement in addition to the absolute accuracy. In the previous studies, our study team evaluated the absolute 2D geo-location accuracy of the TerraSAR-X ortho-rectified EEC product for both flat and mountain areas. Therefore, the purpose of the current study was to evaluate the spatial and temporal relative geo-location accuracies of the product by considering the displacement of the fixed point as the relative geo-location accuracy. Firstly, by utilizing TerraSAR-X StripMap dataset, the pixel matching method for estimating the displacement with sub-pixel level was developed. Secondly, the validity of the method was confirmed by comparing with GEONET data. We confirmed that the accuracy of the displacement for X and Y direction was in agreement with the previous studies. Subsequently, the methodology was applied to 20 pairs of data set for areas of Tokyo Ota-ku and Kawasaki-shi, and the displacement of each pair was evaluated. It was revealed that the time series displacement rate had the seasonal trend and seemed to be related to atmospheric delay.

  7. Evaluation of Relative Geometric Accuracy of Terrasar-X by Pixel Matching Methodology

    Science.gov (United States)

    Nonaka, T.; Asaka, T.; Iwashita, K.

    2016-06-01

    Recently, high-resolution commercial SAR satellites with several meters of resolutions are widely utilized for various applications and disaster monitoring is one of the commonly applied areas. The information about the flooding situation and ground displacement was rapidly announced to the public after the Great East Japan Earthquake 2011. One of the studies reported the displacement in Tohoku region by the pixel matching methodology using both pre- and post- event TerraSAR-X data, and the validated accuracy was about 30 cm at the GEONET reference points. In order to discuss the spatial distribution of the displacement, we need to evaluate the relative accuracy of the displacement in addition to the absolute accuracy. In the previous studies, our study team evaluated the absolute 2D geo-location accuracy of the TerraSAR-X ortho-rectified EEC product for both flat and mountain areas. Therefore, the purpose of the current study was to evaluate the spatial and temporal relative geo-location accuracies of the product by considering the displacement of the fixed point as the relative geo-location accuracy. Firstly, by utilizing TerraSAR-X StripMap dataset, the pixel matching method for estimating the displacement with sub-pixel level was developed. Secondly, the validity of the method was confirmed by comparing with GEONET data. We confirmed that the accuracy of the displacement for X and Y direction was in agreement with the previous studies. Subsequently, the methodology was applied to 20 pairs of data set for areas of Tokyo Ota-ku and Kawasaki-shi, and the displacement of each pair was evaluated. It was revealed that the time series displacement rate had the seasonal trend and seemed to be related to atmospheric delay.

  8. Evolution of teaching and evaluation methodologies: The experience in the computer programming course at the Universidad Nacional de Colombia

    Directory of Open Access Journals (Sweden)

    Jonatan Gomez Perdomo

    2014-05-01

    Full Text Available In this paper, we present the evolution of a computer-programming course at the Universidad Nacional de Colombia (UNAL. The teaching methodology has evolved from a linear and non-standardized methodology to a flexible, non-linear and student-centered methodology. Our methodology uses an e-learning platform that supports the learning process by offering students and professors custom navigation between the content and material in an interactive way (book chapters, exercises, videos. Moreover, the platform is open access, and approximately 900 students from the university take this course each term. However, our evaluation methodology has evolved from static evaluations based on paper tests to an online process based on computer adaptive testing (CAT that chooses the questions to ask a student and assigns the student a grade according to the student’s ability.

  9. Evaluating the impact of public space investments with limited time and funds: (methodological) lessons from a Swiss case study

    Energy Technology Data Exchange (ETDEWEB)

    Barjak, F.

    2016-07-01

    The paper suggests a methodology for evaluating innovation support policies and funding in the space sector. Previous evaluations have suggested methodologies which require considerable time and resources. Our approach combines a data collection at organisational level through standardised interviews and at project level through an online survey which are relatively quick to implement and less costly. We demonstrate that valid results can be obtained with such an approach. (Author)

  10. Heuristic evaluation of paper-based Web pages: a simplified inspection usability methodology.

    Science.gov (United States)

    Allen, Mureen; Currie, Leanne M; Bakken, Suzanne; Patel, Vimla L; Cimino, James J

    2006-08-01

    Online medical information, when presented to clinicians, must be well-organized and intuitive to use, so that the clinicians can conduct their daily work efficiently and without error. It is essential to actively seek to produce good user interfaces that are acceptable to the user. This paper describes the methodology used to develop a simplified heuristic evaluation (HE) suitable for the evaluation of screen shots of Web pages, the development of an HE instrument used to conduct the evaluation, and the results of the evaluation of the aforementioned screen shots. In addition, this paper presents examples of the process of categorizing problems identified by the HE and the technological solutions identified to resolve these problems. Four usability experts reviewed 18 paper-based screen shots and made a total of 108 comments. Each expert completed the task in about an hour. We were able to implement solutions to approximately 70% of the violations. Our study found that a heuristic evaluation using paper-based screen shots of a user interface was expeditious, inexpensive, and straightforward to implement.

  11. Methodological approach to a multidimensional evaluation of food and nutrition policies.

    Science.gov (United States)

    Santos, Leonor Maria Pacheco; dos Santos, Sandra Maria Chaves

    2003-01-01

    Recommendations arising from global conferences and summits, expressed the need to formulate and implement public policies to improve household food security. In the context of maximizing benefits given available resources, comprehensive evaluations of the nutrition policies and programs are needed. One obstacle to overcome was a clear definition of terminology; the words efficiency, effectiveness, efficacy and impact, widely used in the context of program evaluation, are sometimes interchanged and there is no consensus about their precise definition. Another approach to health evaluation is based in the paradigm structure-process-outcome. The level structure contemplated the installations, resources, instruments (physical and discursive), as well as the technical bureaucratic organizational structures. Process encompassed the whole set of intervention activities developed, whereas the dimension of outcome comprised the effects of interventions on the health and nutrition of beneficiaries. Each of the three dimensions constitutes a continuum in the evaluation procedure: the structure only fulfills its purposes if the processes are adequate and conversely, processes cannot alone supersede structural limitations. Moreover, all the three dimensions only reach their ultimate objectives through the completion of outcomes. The methodology proposed here has been tested in the case of Bahia, Northeast Brazil, and it was found to be adequate for this type of analysis. We hope this approach of a comprehensive multidimensional evaluation, constitutes an effective contribution for program planners and program managers, in particular with regard to the obstacles detected, some of which can surely be overcome.

  12. Flaw evaluation methodology for class 2, 3 components in light water reactors

    International Nuclear Information System (INIS)

    Miura, Naoki; Kashima, Koichi; Miyazaki, Katsumasa; Hasegawa, Kunio; Oritani, Naohiko

    2006-01-01

    It is quite important to validate the structural integrity of operating plant components as aged LWR plants are gradually increasing in Japan. The rules on fitness-for-service for nuclear power plants constituted by the JSME provides flaw evaluation methodology. They are mainly focused on Class 1 components, while flaw evaluation criteria for Class 2, 3 components are not consolidated. As such, they also required from the viewpoints of in-service inspection request, reduction of operating cost and systematization of consistent code/standard. In this study, basic concept of flaw evaluation for Class 2, 3 piping was considered, and it is concluded that the same evaluation procedure as Class 1 piping in the current rules is applicable. Some technical issues on practical flaw evaluation for Class 2, 3 piping were listed up, and a countermeasure for each issue was devised. Especially, both allowable flaw sizes in acceptance standards and critical flaw sizes in acceptance criteria have to be determined in consideration of degraded fracture toughness. (author)

  13. Quantitative evaluation of geodiversity: development of methodological procedures with application to territorial management

    Science.gov (United States)

    Forte, J.; Brilha, J.; Pereira, D.; Nolasco, M.

    2012-04-01

    Although geodiversity is considered the setting for biodiversity, there is still a huge gap in the social recognition of these two concepts. The concept of geodiversity, less developed, is now making its own way as a robust and fundamental idea concerning the abiotic component of nature. From a conservationist point of view, the lack of a broader knowledge concerning the type and spatial variation of geodiversity, as well as its relationship with biodiversity, makes the protection and management of natural or semi-natural areas incomplete. There is a growing need to understand the patterns of geodiversity in different landscapes and to translate this knowledge for territorial management in a practical and effective point of view. This kind of management can also represent an important tool for the development of sustainable tourism, particularly geotourism, which can bring benefits not only for the environment, but also for social and economic purposes. The quantification of geodiversity is an important step in all this process but still few researchers are investing in the development of a proper methodology. The assessment methodologies that were published so far are mainly focused on the evaluation of geomorphological elements, sometimes complemented with information about lithology, soils, hidrology, morphometric variables, climatic surfaces and geosites. This results in very dissimilar areas at very different spatial scales, showing the complexity of the task and the need of further research. This current work aims the development of an effective methodology for the assessment of the maximum elements of geodiversity possible (rocks, minerals, fossils, landforms, soils), based on GIS routines. The main determinant factor for the quantitative assessment is scale, but other factors are also very important, such as the existence of suitable spatial data with sufficient degree of detail. It is expected to attain the proper procedures in order to assess geodiversity

  14. SOCIAL INDICATORS FOR EVALUATING SUSTAINABILITY OF GOAT LIVESTOCK FARMS: METHODOLOGICAL APPROACH

    Directory of Open Access Journals (Sweden)

    Francisco de Asís Ruiz Morales

    2009-02-01

    Full Text Available Currently, sustainability is an objective for any economic activity or development process. Many studies with theoretical reflections relating to the concept of sustainability exist, but few methodological contributions adequately quantify and evaluate the level of sustainability of agraricultural systems, specifically with respect to small ruminant. The level of sustainability of these systems should be estimated taking into account not only economic and environmental aspects, but also social ones. Despite its importance to the functioning of agraricultural systems, the social dimension has been little addressed, and is frequently ignored in studies of this nature. Then, the objective of this study is to carry out methodological reflections based on identification and quantification of social indicators applied to goat livestock farms. Furthermore, this study forms part of a broader comparative study on sustainable development of animal systems in Andalusia (Spain and Chiapas (Mexico, in which economic, environmental, and social indicators are used in an integrated manner. The methodology used to obtain indicators is based on the authors´ knowledge of the functioning of goat livestock systems, focus groups and opinions of experts in the field, and revision of the available bibliography. As a result of the study, we propose a group of indicators made up of several variables based on the logical-mathematical principals of different scales of measurement as well as on multicriteria analysis. The social indicators proposed refer to several themes: i multi-functionality; ii membership in professional associations; iii implication for local life; iv social well-being (quality of life, especially that related to work; and v continuity of the goats livestock activity.

  15. Use of cesium-137 methodology in the evaluation of superficial erosive processes

    Directory of Open Access Journals (Sweden)

    Avacir Casanova Andrello

    2003-06-01

    Full Text Available Superficial erosion is one of the main soil degradation agents and erosion rates estimations for different edaphicclimate conditions for the conventional models, as USLE and RUSLE, are expensive and time-consuming. The use of cesium-137 antrophogenic radionuclide is a new methodology that has been much studied and its application in the erosion soil evaluation has grown in countries as USA, UK, Australia and others. A brief narration of this methodology is being presented, as the development of the equations utilized for the erosion rates quantification through the cesium-137 measurements. Two watersheds studied in Brazil have shown that the cesium-137 methodology was practicable and coherent with the survey in field for applications in erosion studies.A erosão superficial é um dos principais agentes de degradação dos solos e estimativas das taxas de erosão para diferentes condições edafoclimáticas pelos modelos tradicionais como USLE, RUSLE, são onerosos e demorados. Uma metodologia que tem sido muito estudada e sua aplicação no estudo da erosão vem crescendo em países como EUA, Reino Unido, Austrália, e outros, é a do uso do radionuclídeo antropogênico césio-137. Um resumo da história desta metodologia é apresentado, assim como a evolução das equações utilizadas para quantificar as taxas de erosão através da medida do césio-137. Duas bacias estudadas no Brasil mostraram que a metodologia do césio-137 é viável e coerente com as observações em campo para aplicação no estudo da erosão.

  16. Maximizing Health or Sufficient Capability in Economic Evaluation? A Methodological Experiment of Treatment for Drug Addiction.

    Science.gov (United States)

    Goranitis, Ilias; Coast, Joanna; Day, Ed; Copello, Alex; Freemantle, Nick; Frew, Emma

    2017-07-01

    Conventional practice within the United Kingdom and beyond is to conduct economic evaluations with "health" as evaluative space and "health maximization" as the decision-making rule. However, there is increasing recognition that this evaluative framework may not always be appropriate, and this is particularly the case within public health and social care contexts. This article presents a methodological case study designed to explore the impact of changing the evaluative space within an economic evaluation from health to capability well-being and the decision-making rule from health maximization to the maximization of sufficient capability. Capability well-being is an evaluative space grounded on Amartya Sen's capability approach and assesses well-being based on individuals' ability to do and be the things they value in life. Sufficient capability is an egalitarian approach to decision making that aims to ensure everyone in society achieves a normatively sufficient level of capability well-being. The case study is treatment for drug addiction, and the cost-effectiveness of 2 psychological interventions relative to usual care is assessed using data from a pilot trial. Analyses are undertaken from a health care and a government perspective. For the purpose of the study, quality-adjusted life years (measured using the EQ-5D-5L) and years of full capability equivalent and years of sufficient capability equivalent (both measured using the ICECAP-A [ICEpop CAPability measure for Adults]) are estimated. The study concludes that different evaluative spaces and decision-making rules have the potential to offer opposing treatment recommendations. The implications for policy makers are discussed.

  17. Study on scenario evaluation methodology for decommissioning nuclear facilities using fuzzy logic

    International Nuclear Information System (INIS)

    Matsuhashi, Kazuya; Yanagihara, Satoshi

    2015-01-01

    Since there are many scenarios of the process from start to completion of a decommissioning project, it is important to study scenarios of decommissioning by evaluating such properties as safety, cost, and technology. An optimum scenario with the highest feasibility in accordance with the facility and environmental conditions should be selected on the basis of the results of the study. For analyzing a scenario of decommissioning, we prepared structured work packages by using the work breakdown structures (WBS) method together with qualitative evaluation of the technologies being applied to work packages located at the bottom (the third level) of the WBS. A calculation model was constructed to evaluate the feasibility of a scenario where fuzzy logic is applied to derive a score of technology performance and TOPSIS is applied for getting a feasibility grade of the scenario from technical performance scoring. As a case study, the model was applied to the debris removal scenario of Fukushima Daiichi Nuclear Power Plant to confirm its applicability. Two scenarios, underwater and in-air debris removal cases, were characterized by extracting the work packages with the lowest feasibility and by obtaining total average scores of the scenarios. It is confirmed that the methodology developed is useful for the scenario evaluation of decommissioning nuclear facilities. (author)

  18. Methodology for Evaluating Raw Material Changes to RSRM Elastomeric Insulation Materials

    Science.gov (United States)

    Mildenhall, Scott D.; McCool, Alex (Technical Monitor)

    2001-01-01

    The Reusable Solid Rocket Motor (RSRM) uses asbestos and silicon dioxide filled acrylonitrile butadiene rubber (AS-NBR) as the primary internal insulation to protect the case from heat. During the course of the RSRM Program, several changes have been made to the raw materials and processing of the AS-NBR elastomeric insulation material. These changes have been primarily caused by raw materials becoming obsolete. In addition, some process changes have been implemented that were deemed necessary to improve the quality and consistency of the AS-NBR insulation material. Each change has been evaluated using unique test efforts customized to determine the potential impacts of the specific raw material or process change. Following the evaluations, the various raw material and process changes were successfully implemented with no detectable effect on the performance of the AS-NBR insulation. This paper will discuss some of the raw material and process changes evaluated, the methodology used in designing the unique test plans, and the general evaluation results. A summary of the change history of RSRM AS-NBR internal insulation is also presented.

  19. Source term and radiological consequence evaluation for nuclear accidents using a 'hand type' methodology

    International Nuclear Information System (INIS)

    Margeanu, Sorin; Tatiana, Angelescu

    2005-01-01

    In the last decades, hand type calculations have been replaced by computerized solutions, which are much more accurate, but the preparation of an input to run the code can be a time consuming process and can require a laborious work. This is why, a place for hand calculation based on nomograms still exist in some areas. An example is emergency response to an accidental release of radioactive contaminants when the health of persons close to the accident site might be at risk. In this case, results from computerized accident consequences assessment models may be delayed due to the equipment malfunction or the time required developing minimal input files and performing the calculations (typically more than five minutes). A simple nomogram (developed using computerized dispersion model calculations) can provide dispersion and dose estimates within a minute. The paper presents the methodology used for these 'hand type' calculation and the nomograms, figures and tables used to evaluate the dose to an individual close to the release point. In order to illustrate the use of methodology, a hypothetical severe accident scenario involving 14-MW INR-TRIGA research reactor was considered. (authors)

  20. CRITICAL RADAR: TOOL AND METHODOLOGY FOR EVALUATING CURRENT PROJECTS USING MULTIPLE VARIABLES

    Directory of Open Access Journals (Sweden)

    André M. Ferrari

    2017-06-01

    Full Text Available Many resources are invested in measurement processes of projects indicators without, however, give a clear view of which projects deserves the right attention at the right time. This paper proposes the use of statistics, through the analysis of multiple variables and their interrelationships, to give better basis to a critical assessment methodology of current projects used in a multinational mining company. The contribution of the research is to report the methodology called Critical Radar which is based on a graphical tool with simple operationalization that can support the decision making in complex environments, and has great flexibility across the different market scenarios and possible changes in companies guidelines. The tool has great potential to help evaluate current projects due to their characteristics of flexible use in different business areas; high degree of freedom for improvement; use of known market tool in its development; ease of viewing the results through charts and notes and user freedom to use any existing indicators in the company if complied with some statistical data quality characteristics.

  1. Integrated methodology for the evaluation of the vulnerability of archaeological sites: the Roman Theater of Verona

    International Nuclear Information System (INIS)

    Cescatti, Elvis; Lorenzoni, Filippo; Caldon, Mauro; Modena, Claudio; Da Porto, Francesca

    2016-01-01

    The knowledge-based methodologies for assessing the structural safety and vulnerability of historical buildings are based on the application of an operational approach that is divided into several phases including historical research, the execution of non-destructive or moderately destructive investigations, monitoring and structural analysis. Monitoring is a useful tool to be used throughout the whole process of knowledge not only in the preliminary diagnosis, but also for the control of the quality and effectiveness of the interventions, in the context of appropriate conservation programs e protection of the object being studied. From this point of view, monitoring becomes essential for: (i) the evaluation of the real structural behavior and the identification of vulnerabilities, prior to the execution of any intervention; (ii) minimization and optimization of interventions, firstly by providing indications regarding those that are not necessary and / or invasive. This methodology has been recently applied and valid from the authors to an archaeological site of particular relevance: the Roman Theater of Verona. The deepening of the knowledge phase (historical analysis, survey, study of the subsoil, properties of materials), combined with the installation of a permanent monitoring system and the structural modeling, allowed to obtain a reliable assessment of the site's vulnerabilities with the aim of guaranteeing in an effective and careful protection and enhancement.

  2. Multi-attribute Evaluation of Website Quality in E-business Using an Integrated Fuzzy AHPTOPSIS Methodology

    Directory of Open Access Journals (Sweden)

    Tolga Kaya

    2010-09-01

    Full Text Available Success of an e-business company is strongly associated with the relative quality of its website compared to that of its competitors. The purpose of this study is to propose a multi-attribute e-business website quality evaluation methodology based on a modified fuzzy TOPSIS approach. In the proposed methodology, weights of the evaluation criteria are generated by a fuzzy AHP procedure. In performance evaluation problems, the judgments of the experts may usually be vague in form. As fuzzy logic can successfully deal with this kind of uncertainty in human preferences, both classical TOPSIS and classical AHP procedures are implemented under fuzzy environment. The proposed TOPSIS-AHP methodology has successfully been applied to a multi-attribute website quality evaluation problem in Turkish e-business market. Nine sub-criteria under four main categories are used in the evaluation of the most popular e-business websites of Turkey. A sensitivity analysis is also provided.

  3. Study on dynamic team performance evaluation methodology based on team situation awareness model

    International Nuclear Information System (INIS)

    Kim, Suk Chul

    2005-02-01

    The purpose of this thesis is to provide a theoretical framework and its evaluation methodology of team dynamic task performance of operating team at nuclear power plant under the dynamic and tactical environment such as radiological accident. This thesis suggested a team dynamic task performance evaluation model so called team crystallization model stemmed from Endsely's situation awareness model being comprised of four elements: state, information, organization, and orientation and its quantification methods using system dynamics approach and a communication process model based on a receding horizon control approach. The team crystallization model is a holistic approach for evaluating the team dynamic task performance in conjunction with team situation awareness considering physical system dynamics and team behavioral dynamics for a tactical and dynamic task at nuclear power plant. This model provides a systematic measure to evaluate time-dependent team effectiveness or performance affected by multi-agents such as plant states, communication quality in terms of transferring situation-specific information and strategies for achieving the team task goal at given time, and organizational factors. To demonstrate the applicability of the proposed model and its quantification method, the case study was carried out using the data obtained from a full-scope power plant simulator for 1,000MWe pressurized water reactors with four on-the-job operating groups and one expert group who knows accident sequences. Simulated results team dynamic task performance with reference key plant parameters behavior and team-specific organizational center of gravity and cue-and-response matrix illustrated good symmetry with observed value. The team crystallization model will be useful and effective tool for evaluating team effectiveness in terms of recruiting new operating team for new plant as cost-benefit manner. Also, this model can be utilized as a systematic analysis tool for

  4. Study on dynamic team performance evaluation methodology based on team situation awareness model

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Suk Chul

    2005-02-15

    The purpose of this thesis is to provide a theoretical framework and its evaluation methodology of team dynamic task performance of operating team at nuclear power plant under the dynamic and tactical environment such as radiological accident. This thesis suggested a team dynamic task performance evaluation model so called team crystallization model stemmed from Endsely's situation awareness model being comprised of four elements: state, information, organization, and orientation and its quantification methods using system dynamics approach and a communication process model based on a receding horizon control approach. The team crystallization model is a holistic approach for evaluating the team dynamic task performance in conjunction with team situation awareness considering physical system dynamics and team behavioral dynamics for a tactical and dynamic task at nuclear power plant. This model provides a systematic measure to evaluate time-dependent team effectiveness or performance affected by multi-agents such as plant states, communication quality in terms of transferring situation-specific information and strategies for achieving the team task goal at given time, and organizational factors. To demonstrate the applicability of the proposed model and its quantification method, the case study was carried out using the data obtained from a full-scope power plant simulator for 1,000MWe pressurized water reactors with four on-the-job operating groups and one expert group who knows accident sequences. Simulated results team dynamic task performance with reference key plant parameters behavior and team-specific organizational center of gravity and cue-and-response matrix illustrated good symmetry with observed value. The team crystallization model will be useful and effective tool for evaluating team effectiveness in terms of recruiting new operating team for new plant as cost-benefit manner. Also, this model can be utilized as a systematic analysis tool for

  5. Parameters calculation of a shielding experiment and evaluation of calculation methodology

    International Nuclear Information System (INIS)

    Gavazza, S.; Otto, A.C.; Gomes, I.C.; Maiorino, J.R.

    1986-01-01

    In this text is carried out the evaluation of radiation transport methodology, comparying the calculated reactions and dose rates, for neutrons and gamma-rays, with the experimental measurements obtained on iron shield, irradiated in YAYOI reactor. Were employed the ENDF/B-IV and VITAMIN-C libraries and the AMPX-II modular system for generation of cross sections, collapsed by the ANISN code. The transport calculation were made by using the DOT 3.5 code, adjusting the spectrum of the iron shield boundary source to the reactions and dose rates, measured at the beginning of shield. The distributions calculated for neutrons and gamma-rays, on iron shield, presented coherence with the experimental measurements. (Author) [pt

  6. Development of a methodology for evaluation of the conservation status of irradiators used in industrial scintigraphy

    International Nuclear Information System (INIS)

    Candeias, Janaina P.; Estrada, Julio J.S.; Ramalho, Adriana T.; Pinho, A. Soares de

    2005-01-01

    In this work a specific methodology for the evaluation of the conservation status of the internal channel of 192 Ir radiators used in industrial scintigraphy in the country, using an industrial videoscope was developed. Wear and damage to the material of the inner channel of the radiators, such as corrosion, erosion or other, can cause obstruction in the channel. Such blockages can result in the source releasing of the remote control, creating accidental overexposure for the team. Therefore, early detection of obstructions in the inner channel of the radiators can prevent occupational accidents. The videoscope is a device that allows the visualization of the conservation status of the inner channel of the radiators. After videoscopic analyses, it was observed that some 192 Ir radiators presented wear on the inner channel. Also, we analyzed the equipment of 75 Se, because they are more modern and new. Internal channels of selenium radiators are in good condition

  7. Instrumentation and control upgrade evaluation methodology. Volume 1: Manual. Final report

    International Nuclear Information System (INIS)

    Bliss, M.; Brown, E.; Florio, F.; Stofko, M.

    1996-07-01

    This methodology manual describes how to develop an Upgrade Evaluation Report (UER) for an I and C system that has been identified as an upgrade candidate in the I and C Life Cycle Management Plan (LCMP). A UER can be developed by a nuclear power plant to determine the cost-effectiveness and feasibility of upgrading an aging or obsolete Instrumentation and Control (I and C) System. A separate UER is developed for each upgrade candidate system. A UER will determine if a given system requires an upgrade or if it is more cost-effective to maintain the present system. If an upgrade is unnecessary, the system will be reclassified as a retained system and a system maintenance plan will be developed for it. This manual is accompanied by a workbook (EPRI TR-104963-V2) which contains various worksheets, outlines, and generic interview questions that aid in the UER development process

  8. Development and Evaluation of a Methodology for the Generation of Gridded Isotopic Datasets

    Energy Technology Data Exchange (ETDEWEB)

    Argiriou, A. A.; Salamalikis, V [University of Patras, Department of Physics, Laboratory of Atmospheric Physics, Patras (Greece); Lykoudis, S. P. [National Observatory of Athens, Institute of Environmental and Sustainable Development, Athens (Greece)

    2013-07-15

    The accurate knowledge of the spatial distribution of stable isotopes in precipitation is necessary for several applications. Since the number of rain sampling stations is small and unevenly distributed around the globe, the global distribution of stable isotopes can be calculated via the generation of gridded isotopic data sets. Several methods have been proposed for this purpose. In this work a methodology is proposed for the development of 10'x 10' gridded isotopic data from precipitation in the central and eastern Mediterranean. Statistical models are developed taking into account geographical and meteorological parameters as regressors. The residuals are interpolated onto the grid using ordinary kriging and thin plate splines. The result is added to the model grids, to obtain the final isotopic gridded data sets. Models are evaluated using an independent data set. the overall performance of the procedure is satisfactory and the obtained gridded data reproduce the isotopic parameters successfully. (author)

  9. Development and Evaluation of a Methodology for the Generation of Gridded Isotopic Datasets

    International Nuclear Information System (INIS)

    Argiriou, A.A.; Salamalikis, V; Lykoudis, S.P.

    2013-01-01

    The accurate knowledge of the spatial distribution of stable isotopes in precipitation is necessary for several applications. Since the number of rain sampling stations is small and unevenly distributed around the globe, the global distribution of stable isotopes can be calculated via the generation of gridded isotopic data sets. Several methods have been proposed for this purpose. In this work a methodology is proposed for the development of 10'x 10' gridded isotopic data from precipitation in the central and eastern Mediterranean. Statistical models are developed taking into account geographical and meteorological parameters as regressors. The residuals are interpolated onto the grid using ordinary kriging and thin plate splines. The result is added to the model grids, to obtain the final isotopic gridded data sets. Models are evaluated using an independent data set. the overall performance of the procedure is satisfactory and the obtained gridded data reproduce the isotopic parameters successfully. (author)

  10. Evaluating the effects of dam breach methodologies on Consequence Estimation through Sensitivity Analysis

    Science.gov (United States)

    Kalyanapu, A. J.; Thames, B. A.

    2013-12-01

    Dam breach modeling often includes application of models that are sophisticated, yet computationally intensive to compute flood propagation at high temporal and spatial resolutions. This results in a significant need for computational capacity that requires development of newer flood models using multi-processor and graphics processing techniques. Recently, a comprehensive benchmark exercise titled the 12th Benchmark Workshop on Numerical Analysis of Dams, is organized by the International Commission on Large Dams (ICOLD) to evaluate the performance of these various tools used for dam break risk assessment. The ICOLD workshop is focused on estimating the consequences of failure of a hypothetical dam near a hypothetical populated area with complex demographics, and economic activity. The current study uses this hypothetical case study and focuses on evaluating the effects of dam breach methodologies on consequence estimation and analysis. The current study uses ICOLD hypothetical data including the topography, dam geometric and construction information, land use/land cover data along with socio-economic and demographic data. The objective of this study is to evaluate impacts of using four different dam breach methods on the consequence estimates used in the risk assessments. The four methodologies used are: i) Froehlich (1995), ii) MacDonald and Langridge-Monopolis 1984 (MLM), iii) Von Thun and Gillete 1990 (VTG), and iv) Froehlich (2008). To achieve this objective, three different modeling components were used. First, using the HEC-RAS v.4.1, dam breach discharge hydrographs are developed. These hydrographs are then provided as flow inputs into a two dimensional flood model named Flood2D-GPU, which leverages the computer's graphics card for much improved computational capabilities of the model input. Lastly, outputs from Flood2D-GPU, including inundated areas, depth grids, velocity grids, and flood wave arrival time grids, are input into HEC-FIA, which provides the

  11. Project success: A methodological and evaluative case study of the early alert program interventions

    Science.gov (United States)

    Larkins, Randy James

    The purpose of this study was twofold. First, to methodologically examine the use of three types of focus groups 1), traditional face-to face, 2), online video and audio, and 3) online text only. Second, to examine the impact of academic intervention attempts offered by university and department support services. Methodologically, the three types of focus groups were compared in terms of ease of use, comfort, richness of data and ethical considerations. Contextually, support services for a general chemistry course taken primarily by new students were examined using an evaluation method involving effort, monitoring, process, component and treatment specification types of implementation. For this research, fourteen students enrolled in the general chemistry course at Rocky Mountain University in fall term 2014 participated in one of the three types of focus groups to discuss support services for the course. Since the increase of technological advances in the late twentieth century, the use of electronic focus groups has been viewed as a viable alternative to traditional in-person meetings. However, different methods within a methodology might produce different results for both students and researchers. This study inspected differences in ease of use for participants and the researcher, comfort in terms of using technology and in discussing academic issues and support services, richness of the data, and ethical issues surrounding privacy and confidentiality. For this case study, methodological findings were that in-person groups still had relevance in this age of advanced technology. Audio-video groups were more limited than in-person groups in terms of interaction and administration, while text-only groups were easiest to transcribe, but seemed to be the most limited in terms of all other aspects of the research. Finally, ethical concerns were not considered important by members in any group; therefore, it is incumbent on the researcher to provide the best ethical

  12. Symbolic Evaluation Graphs and Term Rewriting — A General Methodology for Analyzing Logic Programs

    DEFF Research Database (Denmark)

    Giesl, J.; Ströder, T.; Schneider-Kamp, P.

    2013-01-01

    There exist many powerful techniques to analyze termination and complexity of term rewrite systems (TRSs). Our goal is to use these techniques for the analysis of other programming languages as well. For instance, approaches to prove termination of definite logic programs by a transformation...... to TRSs have been studied for decades. However, a challenge is to handle languages with more complex evaluation strategies (such as Prolog, where predicates like the cut influence the control flow). We present a general methodology for the analysis of such programs. Here, the logic program is first...... information on the termination or complexity of the original logic program. More information can be found in the full paper [1]. © 2013 Springer-Verlag....

  13. Methodology to evaluate the site standard seismic motion to a nuclear facility

    International Nuclear Information System (INIS)

    Soares, W.A.

    1983-01-01

    For the seismic design of nuclear facilities, the input motion is normally defined by the predicted maximum ground horizontal acceleration and the free field ground response spectrum. This spectrum is computed on the basis of records of strong motion earthquakes. The pair maximum acceleration-response spectrum is called the site standard seismic motion. An overall view of the subjects involved in the determination of the site standard seismic motion to a nuclear facility is presented. The main topics discussed are: basic principles of seismic instrumentation; dynamic and spectral concepts; design earthquakes definitions; fundamentals of seismology; empirical curves developed from prior seismic data; available methodologies and recommended procedures to evaluate the site standard seismic motion. (Author) [pt

  14. Adjustment of tetrazolium methodology for the evaluation of Melanoxylon brauna seeds viability

    Directory of Open Access Journals (Sweden)

    Viviana Borges Corte

    2010-09-01

    Full Text Available The objective of this work was to adjust the tetrazolium test methodology to Melanoxylon brauna seeds. The seeds werepre-conditioned by immersion in distilled water at 25ºC for 24 hours. The tegument of the seeds were removed and the embryos weresubmerged in the tetrazolium solution (pH 6.5 at concentration of 0.05, 0.1 and 0.3%, and were kept in the dark at 25ºC temperaturefor 10 and 24 hours. The embryos were evaluated for the intensity of color, presence of milky areas, aspect of the tissues, and locationof the color. The embryos were individually classified into nine viability classes. They were also submitted to the germination andseedling emergence tests. The best correlations between the standard tests of seed germination of Melanoxylon brauna were those with0.3% concentration for 10 hours. The viability is represented by classes 1, 2 and 3.

  15. Using Mixed Methods to Evaluate a Community Intervention for Sexual Assault Survivors: A Methodological Tale.

    Science.gov (United States)

    Campbell, Rebecca; Patterson, Debra; Bybee, Deborah

    2011-03-01

    This article reviews current epistemological and design issues in the mixed methods literature and then examines the application of one specific design, a sequential explanatory mixed methods design, in an evaluation of a community-based intervention to improve postassault care for sexual assault survivors. Guided by a pragmatist epistemological framework, this study collected quantitative and qualitative data to understand how the implementation of a Sexual Assault Nurse Examiner (SANE) program affected prosecution rates of adult sexual assault cases in a large midwestern community. Quantitative results indicated that the program was successful in affecting legal systems change and the qualitative data revealed the mediating mechanisms of the intervention's effectiveness. Challenges of implementing this design are discussed, including epistemological and practical difficulties that developed from blending methodologies into a single project. © The Author(s) 2011.

  16. Environmental evaluation Methodology as part, of the project multi-aspect evaluation of the portfolio of ISAGEN options

    International Nuclear Information System (INIS)

    Ayala R, Ana Victoria

    2001-01-01

    ISAGEN designed and applied a multi-aspect methodology to classify and compare projects of the company's electricity generation options portfolio. It was developed from a holistic vision, integrating multidisciplinary information from the economic, environmental and technical aspects. This helped to classify the alternatives based on the sum of the values obtained for the different considered aspects. This document presents, in general form, the procedure adopted for the index formulation and selection of factors including the variables corresponding to the sub-aspects (or environmental dimensions) physical, biotic and social. The investigation's work, selection and classification of the variables were developed by an interdisciplinary group of experimented professionals in the environmental evaluation of projects. The integration of the three sub-aspects (physical, biotic and social) resulted in a hierarchy of projects based on environmental considerations, which were finally articulated with the respective values obtained from the technical and economical aspects. In general, the results obtained in each sub-aspect agreed with the hierarchy of projects based on an expert concept previous to the method application. In synthesis, it was observed that this technique is of great utility to make comparisons and general classifications because it allows to take advantage of information with different characteristics and include assumptions or artificial modifiable methodological items that reflect the structure of the deciding agents preferences at any given time

  17. Evaluation of the coat quality of sustained release pellets by individual pellet dissolution methodology.

    Science.gov (United States)

    Xu, Min; Liew, Celine Valeria; Heng, Paul Wan Sia

    2015-01-15

    This study explored the application of 400-DS dissolution apparatus 7 for individual pellet dissolution methodology by a design of experiment approach and compared its capability with that of the USP dissolution apparatus 1 and 2 for differentiating the coat quality of sustained release pellets. Drug loaded pellets were prepared by extrusion-spheronization from powder blends comprising 50%, w/w metformin, 25%, w/w microcrystalline cellulose and 25%, w/w lactose, and then coated with ethyl cellulose to produce sustained release pellets with 8% and 10%, w/w coat weight gains. Various pellet properties were investigated, including cumulative drug release behaviours of ensemble and individual pellets. When USP dissolution apparatus 1 and 2 were used for drug release study of the sustained release pellets prepared, floating and clumping of pellets were observed and confounded the release profiles of the ensemble pellets. Hence, the release profiles obtained did not characterize the actual drug release from individual pellet and the applicability of USP dissolution apparatus 1 and 2 to evaluate the coat quality of sustained release pellets was limited. The cumulative release profile of individual pellet using the 400-DS dissolution apparatus 7 was found to be more precise at distinguishing differences in the applied coat quality. The dip speed and dip interval of the reciprocating holder were critical operational parameters of 400-DS dissolution apparatus 7 that affected the drug release rate of a sustained release pellet during the individual dissolution study. The individual dissolution methodology using the 400-DS dissolution apparatus 7 is a promising technique to evaluate the individual pellet coat quality without the influence of confounding factors such as pellet floating and clumping observed during drug release test with dissolution apparatus 1 and 2, as well as to facilitate the elucidation of the actual drug release mechanism conferred by the applied sustained

  18. Development of a methodology for the evaluation of the thermomechanical behavior of the TRISO fuel

    International Nuclear Information System (INIS)

    Garcia, Lorena P. Rodríguez; Pérez, Daniel Milian; Hernández, Carlos Rafael García; Lorenzo, Daniel E. Milian; Lira, Carlos A. Brayner de Oliveira; Universidad Federal de Pernambuco

    2017-01-01

    The use of the Generation IV Very High Temperature Reactors (VHTR) presents significant perspectives to assume the future nuclear energy and hydrogen production. VHTR has advantages because its low electricity generation costs, short construction periods, high hydrogen production efficiency, safety and reliability, proliferation resistance and inherent safety features of the fuel and reactor. However, it faces substantial challenges to be successfully deployed as a sustainable energy source. One of these key challenges is the nuclear safety which mainly relies on the quality and integrity of the coated fuel particles (TRISO) planned to be used in these reactors taking into consideration the high temperatures (1000°C in normal operation and up to 1800°C in accidents conditions) and burnup degrees (150 - 200 GWd/tonU) achievable in these reactors. In this paper is presented the current state of development of a methodology for the evaluation of the thermomechanical behavior of the TRISO fuel in function of the variation of different parameters in the VHTR. In order to achieve this goal will be used coupled computational modeling using analytical methods and Monte Carlo and CFD codes such as MCNPX version 2.6e and Ansys version 14. The studies performed in this investigation included the evaluation of key parameters in the TRISO such as the release of fission gases and CO, gas pressure, temperature distributions, kernel migration, maximum stress values, and failure probabilities. The results achieved in this investigation contributes to demonstrating the viability of the proposed methodology for the study, the design and safety calculations of VHTR. (author)

  19. A General Methodology for Evaluation of Carbon Sequestration Activities and Carbon Credits

    Energy Technology Data Exchange (ETDEWEB)

    Klasson, KT

    2002-12-23

    A general methodology was developed for evaluation of carbon sequestration technologies. In this document, we provide a method that is quantitative, but is structured to give qualitative comparisons despite changes in detailed method parameters, i.e., it does not matter what ''grade'' a sequestration technology gets but a ''better'' technology should receive a better grade. To meet these objectives, we developed and elaborate on the following concepts: (1) All resources used in a sequestration activity should be reviewed by estimating the amount of greenhouse gas emissions for which they historically are responsible. We have done this by introducing a quantifier we term Full-Cycle Carbon Emissions, which is tied to the resource. (2) The future fate of sequestered carbon should be included in technology evaluations. We have addressed this by introducing a variable called Time-adjusted Value of Carbon Sequestration to weigh potential future releases of carbon, escaping the sequestered form. (3) The Figure of Merit of a sequestration technology should address the entire life-cycle of an activity. The figures of merit we have developed relate the investment made (carbon release during the construction phase) to the life-time sequestration capacity of the activity. To account for carbon flows that occur during different times of an activity we incorporate the Time Value of Carbon Flows. The methodology we have developed can be expanded to include financial, social, and long-term environmental aspects of a sequestration technology implementation. It does not rely on global atmospheric modeling efforts but is consistent with these efforts and could be combined with them.

  20. Development of a methodology for the evaluation of the thermomechanical behavior of the TRISO fuel

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Lorena P. Rodríguez; Pérez, Daniel Milian; Hernández, Carlos Rafael García; Lorenzo, Daniel E. Milian; Lira, Carlos A. Brayner de Oliveira, E-mail: lorenapilar1109@gmail.com, E-mail: milianperez89@gmail.com, E-mail: cgh@instec.cu, E-mail: dmilian@instec.cu, E-mail: cabol@ufpe.br [Higher Institute of Technologies and Applied Sciences (InSTEC), Habana (Cuba); Universidad Federal de Pernambuco (UFPE), Recife (Brazil). Departamento de Energia Nuclear

    2017-11-01

    The use of the Generation IV Very High Temperature Reactors (VHTR) presents significant perspectives to assume the future nuclear energy and hydrogen production. VHTR has advantages because its low electricity generation costs, short construction periods, high hydrogen production efficiency, safety and reliability, proliferation resistance and inherent safety features of the fuel and reactor. However, it faces substantial challenges to be successfully deployed as a sustainable energy source. One of these key challenges is the nuclear safety which mainly relies on the quality and integrity of the coated fuel particles (TRISO) planned to be used in these reactors taking into consideration the high temperatures (1000°C in normal operation and up to 1800°C in accidents conditions) and burnup degrees (150 - 200 GWd/tonU) achievable in these reactors. In this paper is presented the current state of development of a methodology for the evaluation of the thermomechanical behavior of the TRISO fuel in function of the variation of different parameters in the VHTR. In order to achieve this goal will be used coupled computational modeling using analytical methods and Monte Carlo and CFD codes such as MCNPX version 2.6e and Ansys version 14. The studies performed in this investigation included the evaluation of key parameters in the TRISO such as the release of fission gases and CO, gas pressure, temperature distributions, kernel migration, maximum stress values, and failure probabilities. The results achieved in this investigation contributes to demonstrating the viability of the proposed methodology for the study, the design and safety calculations of VHTR. (author)

  1. Design methodology and results evaluation of a heating functionality in modular lab-on-chip systems

    Science.gov (United States)

    Streit, Petra; Nestler, Joerg; Shaporin, Alexey; Graunitz, Jenny; Otto, Thomas

    2018-06-01

    Lab-on-a-chip (LoC) systems offer the opportunity of fast and customized biological analyses executed at the ‘point-of-need’ without expensive lab equipment. Some biological processes need a temperature treatment. Therefore, it is important to ensure a defined and stable temperature distribution in the biosensor area. An integrated heating functionality is realized with discrete resistive heating elements including temperature measurement. The focus of this contribution is a design methodology and evaluation technique of the temperature distribution in the biosensor area with regard to the thermal-electrical behaviour of the heat sources. Furthermore, a sophisticated control of the biosensor temperature is proposed. A finite element (FE) model with one and more integrated heat sources in a polymer-based LoC system is used to investigate the impact of the number and arrangement of heating elements on the temperature distribution around the heating elements and in the biosensor area. Based on this model, various LOC systems are designed and fabricated. Electrical characterization of the heat sources and independent temperature measurements with infrared technique are performed to verify the model parameters and prove the simulation approach. The FE model and the proposed methodology is the foundation for optimization and evaluation of new designs with regard to temperature requirements of the biosensor. Furthermore, a linear dependency of the heater temperature on the electric current is demonstrated in the targeted temperature range of 20 °C to 70 °C enabling the usage of the heating functionality for biological reactions requiring a steady-state temperature up to 70 °C. The correlation between heater and biosensor area temperature is derived for a direct control through the heating current.

  2. [Methodological aspects of the reconstitution and evaluation of the behavioral theories that underlie population policy].

    Science.gov (United States)

    Leeuw, F

    1991-09-01

    This work discusses methodological aspects of the articulation and evaluation of behavioral theories underlying demographic policies. Such theories, called "policy theories" among other terms, may be defined as a group of hypotheses explicitly translated into predictions about behavior that underlie policy measures and that concern the relations between the measure and the objective to be attained. Interest in policy theories has been reflected in the writings of such demographers as D. Bogue, J. Blake, and T. Burch, and of researchers from other social science disciplines. 2 examples of policy theories from the Netherlands are presented to illustrate the discussion, 1 describing family planning communication programs that were intended to reduce the number of unwanted and unplanned pregnancies, and the other describing measures to increase availability of child care services in order to facilitate labor force participation of women and ultimately to increase the birth rate. Both theories are found to be comprised of 2 main parallel theories and several related hypotheses. Because political authorities do not usually make explicit the hypotheses that support political measures, their hypotheses must be articulated and reconstituted through attention to debates, written communications, interviews, and other means. The reconstitution must be done as objectively as possible, which implies the need to follow some methodologic rules. Examples are cited of principles advanced by researchers in management science, market research, and political science. 7 methodological rules or steps are then suggested for articulating policy theories: 1) identify statements relative to the political problem, such as excessive or inadequate fertility rates; 2) use the sources to identify reasons for undertaking concrete policy measures; 3) describe the role of the official in the political process; 4) inventory all declarations concerning the relationship between the objective and the

  3. Methodology of CO{sub 2} emission evaluation in the life cycle of office building facades

    Energy Technology Data Exchange (ETDEWEB)

    Taborianski, Vanessa Montoro; Prado, Racine T.A., E-mail: racine.prado@poli.usp.br

    2012-02-15

    The construction industry is one of the greatest sources of pollution because of the high level of energy consumption during its life cycle. In addition to using energy while constructing a building, several systems also use power while the building is operating, especially the air-conditioning system. Energy consumption for this system is related, among other issues, to external air temperature and the required internal temperature of the building. The facades are elements which present the highest level of ambient heat transfer from the outside to the inside of tall buildings. Thus, the type of facade has an influence on energy consumption during the building life cycle and, consequently, contributes to buildings' CO{sub 2} emissions, because these emissions are directly connected to energy consumption. Therefore, the aim is to help develop a methodology for evaluating CO{sub 2} emissions generated during the life cycle of office building facades. The results, based on the parameters used in this study, show that facades using structural glazing and uncolored glass emit the most CO{sub 2} throughout their life cycle, followed by brick facades covered with compound aluminum panels or ACM (Aluminum Composite Material), facades using structural glazing and reflective glass and brick facades with plaster coating. On the other hand, the typology of facade that emits less CO{sub 2} is brickwork and mortar because its thermal barrier is better than structural glazing facade and materials used to produce this facade are better than brickwork and ACM. Finally, an uncertainty analysis was conducted to verify the accuracy of the results attained. - Highlights: Black-Right-Pointing-Pointer We develop a methodology for evaluating CO{sub 2} emissions generated during the life cycle of office building facades. Black-Right-Pointing-Pointer This methodology is based in LCA. Black-Right-Pointing-Pointer We use an uncertainty analysis to verify the accuracy of the results

  4. Evaluation methodology for flood damage reduction by preliminary water release from hydroelectric dams

    Science.gov (United States)

    Ando, T.; Kawasaki, A.; Koike, T.

    2017-12-01

    IPCC AR5 (2014) reported that rainfall in the middle latitudes of the Northern Hemisphere has been increasing since 1901, and it is claimed that warmer climate will increase the risk of floods. In contrast, world water demand is forecasted to exceed a sustainable supply by 40 percent by 2030. In order to avoid this expectable water shortage, securing new water resources has become an utmost challenge. However, flood risk prevention and the secure of water resources are contradictory. To solve this problem, we can use existing hydroelectric dams not only as energy resources but also for flood control. However, in case of Japan, hydroelectric dams take no responsibility for it, and benefits have not been discussed accrued by controlling flood by hydroelectric dams, namely by using preliminary water release from them. Therefore, our paper proposes methodology for assessing those benefits. This methodology has three stages as shown in Fig. 1. First, RRI model is used to model flood events, taking account of the probability of rainfall. Second, flood damage is calculated using assets in inundation areas multiplied by the inundation depths generated by that RRI model. Third, the losses stemming from preliminary water release are calculated, and adding them to flood damage, overall losses are calculated. We can evaluate the benefits by changing the volume of preliminary release. As a result, shown in Fig. 2, the use of hydroelectric dams to control flooding creates 20 billion Yen benefits, in the probability of three-day-ahead rainfall prediction of the assumed maximum rainfall in Oi River, in the Shizuoka Pref. of Japan. As the third priority in the Sendai Framework for Disaster Risk Reduction 2015-2030, `investing in disaster risk reduction for resilience - public and private investment in disaster risk prevention and reduction through structural and non-structural measures' was adopted. The accuracy of rainfall prediction is the key factor in maximizing the benefits

  5. The use of fracture mechanics methodologies for NDT results evaluation and comparison

    International Nuclear Information System (INIS)

    Reale, S.

    1995-01-01

    In the general frame of analysing the interactions amongst the information from non destructive evaluation (NDE) and the methodologies to assess the integrity of a defective structure (such as fracture mechanics), the aim of the paper is to analyse and compare, in terms of indices related to safety margins, NDE results from round robin testing trials to acheive assessments of capabilities and limitations.A structural integrity/fracture mechanics approach for evaluating and comparing results from non destructive techniques is presented. Safety factors can be associated to flaws detected and characterized by inspections (estimated flaws) and to flaws actually present (reference flaws). The mismatch between safety factors associated to estimated flaws and safety factors associated to reference flaws can be used to assess capabilities and limitations of procedures and techniques in use for inspections.As an example, to show how the above procedure is applied and its potential as a method of data evaluation and comparison, the NDE results produced by the PISC (project for the inspection of steel components) activity have been considered. (orig.)

  6. A methodology for the evaluation of fuel rod failures under transportation accidents

    International Nuclear Information System (INIS)

    Rashid, J.Y.R.; Machiels, A.J.

    2004-01-01

    Recent studies on long-term behavior of high-burnup spent fuel have shown that under normal conditions of stor-age, challenges to cladding integrity from various postulated damage mechanisms, such as delayed hydride crack-ing, stress-corrosion cracking and long-term creep, would not lead to any significant safety concerns during dry storage, and regulatory rules have subsequently been established to ensure that a compatible level of safety is maintained. However, similar safety assurances for spent fuel transportation have not yet been developed, and further studies are currently being conducted to evaluate the conditions under which transportation-related safety issues can be resolved. One of the issues presently under evaluation is the ability and the extent of the fuel as-semblies to maintain non-reconfigured geometry during transportation accidents. This evaluation may determine whether, or not, the shielding, confinement, and criticality safety evaluations can be performed assuming initial fuel assembly geometries. The degree to which spent fuel re-configuration could occur during a transportation accident would depend to a large degree on the number of fuel rod failures and the type and geometry of the failure modes. Such information can only be developed analytically, as there is no direct experimental data that can provide guidance on the level of damage that can be expected. To this end, the paper focuses on the development of a modeling and analysis methodology that deals with this general problem on a generic basis. First consideration is given to defining acci-dent loading that is equivalent to the bounding, although analytically intractable, hypothetical transportation acci-dent of a 9-meter drop onto essentially unyielding surface, which is effectively a condition for impact-limiters de-sign. Second, an analytically robust material constitutive model, an essential element in a successful structural analysis, is required. A material behavior model

  7. Tools and methodologies for evaluation of energy chains and for technology perspective

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The challenge of climate change implies to accelerate the pace of innovation and consequently to lead long-term basic and applied research with a planning horizon of several decades, far beyond the conditions of current market development. In such a context, the availability of efficient decision-aiding tools and methodologies, far more advanced than those presently operated, is a critical stake.The different categories of tools will have to be more complementary by design and the overall decision-aiding processes will have to integrate numerous system analysis approaches in order to take into account more deeply all economical, environmental and societal impacts. The general goal of the workshop was to address this imperative to break new ground in decision-aiding tools and methodologies to help us to prioritize energy R and D options, comparing the needs jointly with the state of art and with the potentiality of breakthroughs, mainly in environmental and social sciences. The expected outcome was to characterize the scope and limits of existing decision-aiding processes, to highlight the perspectives towards more advanced new ones, and, as such, to foster interdisciplinary cooperation by linking more closely social and environmental sciences with energy socio-economic modelling research. The workshop included four parts. The first three addressed specialized sessions, outlining three different categories of tools. The fourth one was dedicated to the perspective of a combined use of these complementary tools in order to have methodologies available for covering the whole field of energy and social sciences issues. After this last session, there was a closing synthesis of the two day's work on the challenges to take up and the ways to go. This document gathers the transparencies of the following presentations: H2A Project/Evaluation of hydrogen chains (G. Sverdrup); E3DataBase/Evaluation of hydrogen chains (J. Schindler); Micro-economic modelling for evaluation

  8. Tools and methodologies for evaluation of energy chains and for technology perspective

    International Nuclear Information System (INIS)

    2005-01-01

    The challenge of climate change implies to accelerate the pace of innovation and consequently to lead long-term basic and applied research with a planning horizon of several decades, far beyond the conditions of current market development. In such a context, the availability of efficient decision-aiding tools and methodologies, far more advanced than those presently operated, is a critical stake.The different categories of tools will have to be more complementary by design and the overall decision-aiding processes will have to integrate numerous system analysis approaches in order to take into account more deeply all economical, environmental and societal impacts. The general goal of the workshop was to address this imperative to break new ground in decision-aiding tools and methodologies to help us to prioritize energy R and D options, comparing the needs jointly with the state of art and with the potentiality of breakthroughs, mainly in environmental and social sciences. The expected outcome was to characterize the scope and limits of existing decision-aiding processes, to highlight the perspectives towards more advanced new ones, and, as such, to foster interdisciplinary cooperation by linking more closely social and environmental sciences with energy socio-economic modelling research. The workshop included four parts. The first three addressed specialized sessions, outlining three different categories of tools. The fourth one was dedicated to the perspective of a combined use of these complementary tools in order to have methodologies available for covering the whole field of energy and social sciences issues. After this last session, there was a closing synthesis of the two day's work on the challenges to take up and the ways to go. This document gathers the transparencies of the following presentations: H2A Project/Evaluation of hydrogen chains (G. Sverdrup); E3DataBase/Evaluation of hydrogen chains (J. Schindler); Micro-economic modelling for evaluation of

  9. Methodology for the technical evaluation of disposal systems for Greater-Than-Class C low-level radioactive waste

    International Nuclear Information System (INIS)

    Lamar, D.A.; Raymond, J.R.

    1990-07-01

    This paper presents the methodology that will be used for the evaluation of alternative disposal concepts for Greater-Than-Class C low-level radioactive waste. The primary focus will be on the technical evaluation of various disposal concepts leading toward the identification of technically feasible disposal systems

  10. Methodologies for rapid evaluation of seismic demand levels in nuclear power plant structures

    International Nuclear Information System (INIS)

    Manrique, M.; Asfura, A.; Mukhim, G.

    1990-01-01

    A methodology for rapid assessment of both acceleration spectral peak and 'zero period acceleration' (ZPA) values for virtually any major structure in a nuclear power plant is presented. The methodology is based on spectral peak and ZPA amplification factors, developed from regression analyses of an analytical database. The developed amplification factors are applied to the plant's design ground spectrum to obtain amplified response parameters. A practical application of the methodology is presented. This paper also presents a methodology for calculating acceleration response spectrum curves at any number of desired damping ratios directly from a single known damping ratio spectrum. The methodology presented is particularly useful and directly applicable to older vintage nuclear power plant facilities (i.e. such as those affected by USI A-46). The methodology is based on principles of random vibration theory. The methodology has been implemented in a computer program (SPECGEN). SPECGEN results are compared with results obtained from time history analyses. (orig.)

  11. Realistic nurse-led policy implementation, optimization and evaluation: novel methodological exemplar.

    Science.gov (United States)

    Noyes, Jane; Lewis, Mary; Bennett, Virginia; Widdas, David; Brombley, Karen

    2014-01-01

    To report the first large-scale realistic nurse-led implementation, optimization and evaluation of a complex children's continuing-care policy. Health policies are increasingly complex, involve multiple Government departments and frequently fail to translate into better patient outcomes. Realist methods have not yet been adapted for policy implementation. Research methodology - Evaluation using theory-based realist methods for policy implementation. An expert group developed the policy and supporting tools. Implementation and evaluation design integrated diffusion of innovation theory with multiple case study and adapted realist principles. Practitioners in 12 English sites worked with Consultant Nurse implementers to manipulate the programme theory and logic of new decision-support tools and care pathway to optimize local implementation. Methods included key-stakeholder interviews, developing practical diffusion of innovation processes using key-opinion leaders and active facilitation strategies and a mini-community of practice. New and existing processes and outcomes were compared for 137 children during 2007-2008. Realist principles were successfully adapted to a shorter policy implementation and evaluation time frame. Important new implementation success factors included facilitated implementation that enabled 'real-time' manipulation of programme logic and local context to best-fit evolving theories of what worked; using local experiential opinion to change supporting tools to more realistically align with local context and what worked; and having sufficient existing local infrastructure to support implementation. Ten mechanisms explained implementation success and differences in outcomes between new and existing processes. Realistic policy implementation methods have advantages over top-down approaches, especially where clinical expertise is low and unlikely to diffuse innovations 'naturally' without facilitated implementation and local optimization. © 2013

  12. Methodology of safety evaluation about land disposal of low level radioactive wastes

    International Nuclear Information System (INIS)

    Suzuki, Atsuyuki

    1986-01-01

    Accompanying the progress of the construction project of low level radioactive waste storage facilities in Aomori Prefecture, the full scale land disposal of low level radioactive wastes shows its symptom also in Japan. In this report, the scientific methodology to explain the safety about the land disposal of low level radioactive wastes is discussed. The land disposal of general wastes by shallow burying has already had sufficient results. In the case of low level radioactive wastes, also the land disposal by shallow burying is considered. Low level radioactive wastes can be regarded as one form of industrial wastes, as there are many common parts in the scientific and theoretical base of the safety. Attention is paid most to the contamination of ground water. Low level radioactive wastes are solid wastes, accordingly the degree of contamination should be less. The space in which ground water existes, the phenomena of ground water movement, the phenomena of ground water dispersion and Fick's law, the adsorption effect of strata, and the evaluation of source term are explained. These are the method to analyze the degree of contamination from safety evaluation viewpoint. (Kako, I.)

  13. Citizen social science: a methodology to facilitate and evaluate workplace learning in continuing interprofessional education.

    Science.gov (United States)

    Dadich, Ann

    2014-05-01

    Workplace learning in continuing interprofessional education (CIPE) can be difficult to facilitate and evaluate, which can create a number of challenges for this type of learning. This article presents an innovative method to foster and investigate workplace learning in CIPE - citizen social science. Citizen social science involves clinicians as co-researchers in the systematic examination of social phenomena. When facilitated by an open-source online social networking platform, clinicians can participate via computer, smartphone, or tablet in ways that suit their needs and preferences. Furthermore, as co-researchers they can help to reveal the dynamic interplay that facilitates workplace learning in CIPE. Although yet to be tested, citizen social science offers four potential benefits: it recognises and accommodates the complexity of workplace learning in CIPE; it has the capacity to both foster and evaluate the phenomena; it can be used in situ, capturing and having direct relevance to the complexity of the workplace; and by advancing both theoretical and methodological debates on CIPE, it may reveal opportunities to improve and sustain workplace learning. By describing an example situated in the youth health sector, this article demonstrates how these benefits might be realised.

  14. A Methodology for Evaluation of Inservice Test Intervals for Pumps and Motor-Operated Valves

    International Nuclear Information System (INIS)

    Cox, D.F.; Haynes, H.D.; McElhaney, K.L.; Otaduy, P.J.; Staunton, R.H.; Vesely, W.E.

    1999-01-01

    Recent nuclear industry reevaluation of component inservice testing (IST) requirements is resulting in requests for IST interval extensions and changes to traditional IST programs. To evaluate these requests, long-term component performance and the methods for mitigating degradation need to be understood. Determining the appropriate IST intervals, along with component testing, monitoring, trending, and maintenance effects, has become necessary. This study provides guidelines to support the evaluation of IST intervals for pumps and motor-operated valves (MOVs). It presents specific engineering information pertinent to the performance and monitoring/testing of pumps and MOVs, provides an analytical methodology for assessing the bounding effects of aging on component margin behavior, and identifies basic elements of an overall program to help ensure component operability. Guidance for assessing probabilistic methods and the risk importance and safety consequences of the performance of pumps and MOVs has not been specifically included within the scope of this report, but these elements may be included in licensee change requests

  15. Computerized methodology for evaluating the long-range radiological impact of shallow-land burial

    International Nuclear Information System (INIS)

    Fields, D.E.; Little, C.A.; Emerson, C.J.

    1981-01-01

    A computerized methodology has been implemented to calculate the risk to local and intermediate-range (up to 80 km distant) populations resulting from water- and air-borne transport of radionuclides present in low-level wastes buried in shallow trenches such as those used at Oak Ridge. Our computer code, PRESTO (Prediction of Radiation Effects from Shallow Trench Operations), was developed under United States Environmental Protection Agency funding to evaluate possible health effects resulting from shallow burial operations. Sources of contamination include radionuclide releases from the trenches and from areas contaminated with operational spillage. The model is intended to predict radionuclide transport and the ensuing exposure and health impact to at-risk populations for a 1000-year period following cessation of burial ground operations. Several classes of submodels are used in PRESTO to represent scheduled event, unit system response, and risk evaluation processes. Examples of scheduled events are trench cap failure, stabilization of insoluble surface contaminant, the onset of farming or reclamation practices, and human intrusion. Unit system response submodels simulate processes such as infiltration of rainwater into the trench and erosion of soil overburden from the trench cover. System response submodels generate parameters used repeatedly in the 1000-year simulation loop

  16. Conceptual and methodological approaches to evaluation of investment attractiveness of enterprises engaged in transportations

    Directory of Open Access Journals (Sweden)

    Olha Myshkovych

    2016-12-01

    Full Text Available The aim of the article is to analyze the conceptual and methodological approaches to determining the investment attractiveness of enterprises engaged in transportations. It is indicated that the investment attractiveness of transport enterprises should be determined by calculating of the overall financial situation of enterprises, which will allow potential investors to evaluate profitability and cost efficiency of its activity. An analysis of the strengths and weaknesses of the enterprise engaged in transportation can be accomplished by the evaluation of its innovative capacity. The identification of factors and reserves of the increasing of enterprise innovative development will allow distinguishing of the basic directions for the improvement of organizational and economic mechanism of its activity. With the aim of building the strategy for the strengthening of market position it is also considered important for the potential investor to obtain the information about enterprise place on the national and international markets. Political and legal environment, characterized by political stability of society and the regulatory framework of entrepreneurial and investment activity serve as a certain guarantee of the investment reliability.

  17. An improved experimental methodology to evaluate the effectiveness of protective gloves against nanoparticles in suspension.

    Science.gov (United States)

    Vinches, Ludwig; Zemzem, Mohamed; Hallé, Stéphane; Peyro, Caroline; Wilkinson, Kevin J; Tufenkji, Nathalie

    2017-07-01

    Recent studies underline the potential health risks associated to the "nano" revolution, particularly for the workers who handle engineered nanoparticles (ENPs) that can be found in the formulation of several commercial products. Although many Health & Safety agencies recommend the use of protective gloves against chemicals, few studies have investigated the effectiveness of these gloves towards nanoparticle suspensions. Moreover, the data that are available are often contradictory. This study was designed to evaluate the effectiveness of protective gloves against nanoparticles in suspension. For this purpose, a new methodology was developed in order to take into account parameters encountered in the workplace such as mechanical deformations (MD) that simulate hand flexion and sweat. The effects of the precise experimental protocol on the concentrations of nanoparticles that were detected in the sampling suspension were assessed. Several samples of nitrile rubber gloves (73 µm thick), taken from different boxes, were brought into contact with gold nanoparticles (5 nm) in water. During their exposure to ENPs, the glove samples submitted systematic mechanical deformations and were placed in contact with a physiological solution simulating human sweat. Under these conditions, results obtained by inductively coupled plasma mass spectrometry (ICPMS) showed that the 5 nm gold nanoparticles passed through the protective gloves. This result was acquired, in spite of the observation of significant losses during the sampling phase that will be important for future experiments evaluating the effectiveness of these materials.

  18. Methodology for Evaluating the Insect Growth Regulator (IGR Methoprene on Packaging Films

    Directory of Open Access Journals (Sweden)

    Frank H. Arthur

    2016-07-01

    Full Text Available The insect growth regulator methoprene can be mixed into the matrix used to comprise bags and other packaging materials. Different methodologies were utilized to evaluate the efficacy of different types of methoprene-treated packaging towards Tribolium castaneum (Herbst, the red flour beetle, and T. confusum Jacquelin duVal, the confused flour beetle, two common insect species that infest stored products. Tests were conducted by creating arenas in which larvae were exposed on the packaging surface along with a flour food source, and assessments were made on adults emerging from the exposed progeny. Tests were also done by exposing adults, again with a flour food source, removing the adults after one week, and assessing adult emergence of progeny from those parental adults. In tests with larvae exposed on methoprene-treated birdseed bags, the outside surface had more activity compared to the inside surface, especially on T. confusum. In other studies with different types of packaging materials, there was generally 100% inhibition of adult emergence of exposed larvae or of progeny adults when parental adults were exposed on the methoprene-treated packaging. The best technique for evaluation was to expose late-stage larvae as the test life stage. Results show the potential of using methoprene-treated packaging for bagged storage of processed grains and grain products.

  19. Economic evaluation of health promotion interventions for older people: do applied economic studies meet the methodological challenges?

    Science.gov (United States)

    Huter, Kai; Dubas-Jakóbczyk, Katarzyna; Kocot, Ewa; Kissimova-Skarbek, Katarzyna; Rothgang, Heinz

    2018-01-01

    In the light of demographic developments health promotion interventions for older people are gaining importance. In addition to methodological challenges arising from the economic evaluation of health promotion interventions in general, there are specific methodological problems for the particular target group of older people. There are especially four main methodological challenges that are discussed in the literature. They concern measurement and valuation of informal caregiving, accounting for productivity costs, effects of unrelated cost in added life years and the inclusion of 'beyond-health' benefits. This paper focuses on the question whether and to what extent specific methodological requirements are actually met in applied health economic evaluations. Following a systematic review of pertinent health economic evaluations, the included studies are analysed on the basis of four assessment criteria that are derived from methodological debates on the economic evaluation of health promotion interventions in general and economic evaluations targeting older people in particular. Of the 37 studies included in the systematic review, only very few include cost and outcome categories discussed as being of specific relevance to the assessment of health promotion interventions for older people. The few studies that consider these aspects use very heterogeneous methods, thus there is no common methodological standard. There is a strong need for the development of guidelines to achieve better comparability and to include cost categories and outcomes that are relevant for older people. Disregarding these methodological obstacles could implicitly lead to discrimination against the elderly in terms of health promotion and disease prevention and, hence, an age-based rationing of public health care.

  20. Impact of methodology on the results of economic evaluations of varicella vaccination programs: is it important for decision-making?

    Directory of Open Access Journals (Sweden)

    Patrícia Coelho de Soárez

    2009-01-01

    Full Text Available This study aims to review the literature on economic evaluation of childhood varicella vaccination programs and to discuss how heterogeneity in methodological aspects and estimation of parameters can affect the studies' results. After applying the inclusion criteria, 27 studies published from 1980 to 2008 were analyzed in relation to methodological differences. There was great heterogeneity in the perspective adopted, evaluation of indirect costs, type of model used, modeling of the effect on herpes zoster, and estimation of vaccine price and efficacy parameters. The factor with the greatest impact on results was the inclusion of indirect costs, followed by the perspective adopted and vaccine price. The choice of a particular methodological aspect or parameter affected the studies' results and conclusions. It is essential that authors present these choices transparently so that users of economic evaluations understand the implications of such choices and the direction in which the results of the analysis were conducted.

  1. Process evaluation of community monitoring under national health mission at Chandigarh, union territory: Methodology and challenges

    Directory of Open Access Journals (Sweden)

    Jaya Prasad Tripathy

    2015-01-01

    Full Text Available Background: Community monitoring was introduced on a pilot mode in 36 selected districts of India in a phased manner. In Chandigarh, it was introduced in the year 2009-2010. A preliminary evaluation of the program was undertaken with special emphasis on the inputs and the processes. Methodology: Quantitative methods included verification against checklists and record reviews. Nonparticipant observation was used to evaluate the conduct of trainings, interviews, and group discussions. Health system had trained health system functionaries (nursing students and Village Health Sanitation Committee [VHSC] members to generate village-based scorecards for assessing community needs. Community needs were assessed independently for two villages under the study area to validate the scores generated by the health system. Results: VHSCs were formed in all 22 villages but without a chairperson or convener. The involvement of VHSC members in the community monitoring process was minimal. The conduct of group discussions was below par due to poor moderation and unequal responses from the group. The community monitoring committees at the state level had limited representation from the non-health sector, lower committees, and the nongovernmental organizations/civil societies. Agreement between the report cards generated by the investigator and the health system in the selected villages was found to be to be fair (0.369 whereas weighted kappa (0.504 was moderate. Conclusion: In spite of all these limitations and challenges, the government has taken a valiant step by trying to involve the community in the monitoring of health services. The dynamic nature of the community warrants incorporation of an evaluation framework into the planning of such programs.

  2. Reliability evaluation methodologies for ensuring container integrity of stored transuranic (TRU) waste

    International Nuclear Information System (INIS)

    Smith, K.L.

    1995-06-01

    This report provides methodologies for providing defensible estimates of expected transuranic waste storage container lifetimes at the Radioactive Waste Management Complex. These methodologies can be used to estimate transuranic waste container reliability (for integrity and degradation) and as an analytical tool to optimize waste container integrity. Container packaging and storage configurations, which directly affect waste container integrity, are also addressed. The methodologies presented provide a means for demonstrating Resource Conservation and Recovery Act waste storage requirements

  3. Development of an Evaluation Methodology for Loss of Large Area Induced from Extreme Events with Malicious Origin

    International Nuclear Information System (INIS)

    Kim, S.C.; Park, J.S.; Chang, D.J.; Kim, D.H.; Lee, S.W.; Lee, Y.J.; Kim, H.W.

    2016-01-01

    Event of loss of large area (LOLA) induced from extreme external event at multi-units nuclear installation has been emerged a new challenges in the realm of nuclear safety and regulation after Fukushima Dai-Ichi accident. The relevant information and experience on evaluation methodology and regulatory requirements are rarely available and negative to share due to the security sensitivity. Most of countries has been prepared their own regulatory requirements and methodologies to evaluate impact of LOLA at nuclear power plant. In Korea, newly amended the Nuclear Safety Acts requires to assess LOLA in terms of EDMG (Extended Damage Mitigation Guideline). Korea Institute of Nuclear Safety (KINS) has performed a pilot research project to develop the methodology and regulatory review guidance on LOLA at multi-units nuclear power plant since 2014. Through this research, we proposed a methodology to identify the strategies for preventive and mitigation of the consequences of LOLA utilizing PSA techniques or its results. The proposed methodology is comprised of 8 steps including policy consideration, threat evaluation, identification of damage path sets, SSCs capacity evaluation and identification of mitigation measures and strategies. The consequence of LOLA due to malevolent aircraft crash may significantly susceptible with analysis assumptions including type of aircraft, amount of residual fuel, and hittable angle and so on, which cannot be shared overtly. This paper introduces a evaluation methodology for LOLA using PSA technique and its results. Also we provide a case study to evaluate hittable access angle using flight simulator for two types of air crafts and to identify potential path sets leading to core damage by affected SSCs within damaged area.(author).

  4. Methodology for the ecotoxicological evaluation of areas polluted by phosphogypsum wastes.

    Science.gov (United States)

    Martínez-Sanchez, M. J.; Garcia-Lorenzo, M. L.; Perez-Sirvent, C.; Martinez-Lopez, S.; Hernandez-Cordoba, M.; Bech, J.

    2012-04-01

    In Spain, the production of phosphoric acid, and hence of phosphogypsum, is restricted to a fertilizer industrial site. The residues contain some radionuclides of the U-series and other contaminants. In order to estimate the risk posed by these materials, chemical methods need to be complemented with biological methods. Then, the aim of this study was to develop a battery of bioassays for the ecotoxicological screening of areas polluted by phosphogypsum wastes. Particularly, the toxicity of water samples, sediments and their pore-water extracts was evaluated by using three assays: bacteria, plants and ostracods. The applied bioassays were: the bioluminescence inhibition of Vibrio fischeri in superficial water samples using Microtox® bioassay; the root and shoot elongation inhibition and the mortality of Lepidium sativum, Sorghum saccharatum and Sinapis alba using Phytotoxkit® bioassay; and inhibition of Heterocypris incongruens by way of Ostracodtoxkit®. Proposed methodology allows the identification of contamination sources and non contaminated areas, corresponding to decreasing toxicity values.

  5. METHODOLOGICAL APPROACHES TO EXPERT EVALUATION OF PRECLINICAL AND CLINICAL TRIALS OF HUMAN IMMUNOGLOBULIN PRODUCTS

    Directory of Open Access Journals (Sweden)

    V. B. Ivanov

    2017-01-01

    Full Text Available The article considers the experience of Russian and leading foreign regulatory agencies in organisation and conduction of preclinical and clinical trials of human immunoglobulin products. The authors suggest a classification of human immunoglobulins and provide updated information on authorization of these products in Russia. The article summarizes methodological approaches, basic scientific principles and criteria relating to expert evaluation of preclinical and clinical trials of blood products. The authors further define the expert body’s requirements for data on preclinical and clinical trials of human normal immuniglobulins and human specific immunoglobulins for the prevention and/or treatment of infectious and non-infectious diseases which are submitted as part of applications for marketing authorization or marketing authorization variation. The article suggests programs of preclinical and clinical trials for human normal immunoglobulins and human specific immunoglobulins for the prevention and/or treatment of infectious and non-infectious diseases that are aligned with the Russian legislation and Eurasian Economic Union’s regulations on medicines circulation, and have been elaborated with respect to the guidelines of the European Medicines Agency.

  6. Evaluation of replacement tritium facility (RTF) compliance with DOE safety goals using probabilistic consequence assessment methodology

    International Nuclear Information System (INIS)

    O'Kula, K.R.; East, J.M.; Moore, M.L.

    1993-01-01

    The Savannah River Site (SRS), operated by the Westinghouse Savannah River Company (WSRC) for the US Department of Energy (DOE), is a major center for the processing of nuclear materials for national defense, deep-space exploration, and medical treatment applications in the United States. As an integral part of the DOE's effort to modernize facilities, implement improved handling and processing technology, and reduce operational risk to the general public and onsite workers, transition of tritium processing at SRS from the Consolidated Tritium Facility to the Replacement Tritium Facility (RTF) began in 1993. To ensure that operation of new DOE facilities such as RTF present minimum involuntary and voluntary risks to the neighboring public and workers, indices of risk have been established to serve as target levels or safety goals of performance for assessing nuclear safety. These goals are discussed from a historical perspective in the initial part of this paper. Secondly, methodologies to quantify risk indices are briefly described. Lastly, accident, abnormal event, and normal operation source terms from RTF are evaluated for consequence assessment purposes relative to the safety targets

  7. The 'PROCESO' index: a new methodology for the evaluation of operational safety in the chemical industry

    International Nuclear Information System (INIS)

    Marono, M.; Pena, J.A.; Santamaria, J.

    2006-01-01

    The acknowledgement of industrial installations as complex systems in the early 1980s outstands as a milestone in the path to operational safety. Process plants are social-technical complex systems of a dynamic nature, whose properties depend not only on their components, but also on the inter-relations among them. A comprehensive assessment of operational safety requires a systemic approach, i.e. an integrated framework that includes all the relevant factors influencing safety. Risk analysis methodologies and safety management systems head the list of methods that point in this direction, but they normally require important plant resources. As a consequence, their use is frequently restricted to especially dangerous processes often driven by compliance with legal requirements. In this work a new safety index for the chemical industry, termed the 'Proceso' Index (standing for the Spanish terms for PROCedure for the Evaluation of Operational Safety), has been developed. PROCESO is based on the principles of systems theory, has a tree-like structure and considers 25 areas to guide the review of plant safety. The method uses indicators whose respective weight values have been obtained via an expert judgement technique. This paper describes the steps followed to develop this new Operational Safety Index, explains its structure and illustrates its application to process plants

  8. Safety evaluation methodology of engineering barriers at repository for low and intermediate level radioactive waste

    International Nuclear Information System (INIS)

    Zarnic, R.; Bokan Bosiljkov, V.; Giacomelli, M.

    2007-01-01

    Analyses of the roles of cement-based barriers in radioactive waste isolation show that models used to estimate their characteristics during the lifetime of the repository must consider the alteration of material properties with time due to degradation processes. Reinforced concrete barriers at repositories shall be designed in such manner that they fulfil besides isolative capabilities also the required functions of mechanical resistance and stability. Key elements of safety evaluation are mainly the correct selection of materials for mineral composites with cement binder (cements, aggregates, mineral additives and chemical admixtures) and their design, execution of construction works and production of precast concrete containers (continuous casting of concrete - no cold joints, limited number of construction joints, proper placing and consolidation, finishing and curing), strict control of used materials and inspection of works, as well as investigation after the construction (visual inspection, non-destructive testing, monitoring, ageing assessment on test containers). According to the methodology presented in this paper the lifetime of the repository can be estimated and, if shorter than 300 years or shorter than the period resulting from safety analysis, appropriate corrective measures shall be taken. (author)

  9. Methodology to evaluate the impact of the erosion in cultivated floors applying the technique of the 137CS

    International Nuclear Information System (INIS)

    Gil Castillo, R.; Peralta Vital, J.L.; Carrazana, J.; Riverol, M.; Penn, F.; Cabrera, E.

    2004-01-01

    The present paper shows the results obtained in the framework of 2 Nuclear Projects, in the topic of application of nuclear techniques to evaluate the erosion rates in cultivated soils. Taking into account the investigations with the 137 CS technique, carried out in the Province of Pinar del Rio, was obtained and validated (first time) a methodology to evaluate the erosion impact in a cropland. The obtained methodology includes all relevant stages for the adequate application of the 137 CS technique, from the initial step of area selection, the soil sampling process, selection of the models and finally, the results evaluation step. During the methodology validation process in soils of the Municipality of San Juan y Martinez, the erosion rates estimated by the methodology and the obtained values by watershed segment measures (traditional technique) were compared in a successful manner. The methodology is a technical guide, for the adequate application of the 137 CS technique to estimate the soil redistribution rates in cultivated soils

  10. ExternE transport methodology for external cost evaluation of air pollution

    DEFF Research Database (Denmark)

    Jensen, S. S.; Berkowicz, R.; Brandt, J.

    The report describes how the human exposure estimates based on NERI's human exposure modelling system (AirGIS) can improve the Danish data used for exposure factors in the ExternE Transport methodology. Initially, a brief description of the ExternE Tranport methodology is given and it is summarised...

  11. Methodological approach for evaluating the geo-exchange potential: VIGOR Project

    Directory of Open Access Journals (Sweden)

    Antonio Galgaro

    2012-12-01

    Full Text Available In the framework of VIGOR Project, a national project coordinated by the Institute of Geosciences and Earth Resources (CNR-IGG and sponsored by the Ministry of Economic Development (MiSE, dedicated to the evaluation of geothermal potential in the regions of the Convergence Objective in Italy (Puglia, Calabria, Campania and Sicily, is expected to evaluate the ability of the territory to heat exchange with the ground for air conditioning of buildings. To identify the conditions for the development of low enthalpy geothermal systems collected and organized on a regional scale geological and stratigraphic data useful for the preparation of a specific thematic mapping, able to represent in a synergistic and simplified way the physical parameters (geological, lithostratigraphic, hydrogeological, thermodynamic that most influence the subsoil behavior for thermal exchange. The litho-stratigraphic and hydrogeological database created for every region led to the production of different cartographic thematic maps, such as the thermal conductivity (lithological and stratigraphical, the surface geothermal flux, the average annual temperature of air, the climate zoning, the areas of hydrogeological restrictions. To obtain a single representation of the geo-exchange potential of the region, the different thematic maps described must be combined together by means of an algorithm, defined on the basis of the SINTACS methodology. The purpose is to weigh the contributions of the involved parameters and to produce a preliminary synthesis map able to identify the territorial use of geothermal heat pump systems, based on the geological characteristics and in agreement with the existing regulatory constraints.

  12. OPTIGOV - A new methodology for evaluating Clinical Governance implementation by health providers

    Directory of Open Access Journals (Sweden)

    Nardella Pierangela

    2010-06-01

    Full Text Available Abstract Background The aim of Clinical Governance (CG is to the pursuit of quality in health care through the integration of all the activities impacting on the patient into a single strategy. OPTIGOV (Optimizing Health Care Governance is a methodology for the assessment of the level of implementation of CG within healthcare organizations. The aim of this paper is to explain the process underlying the development of OPTIGOV, and describe its characteristics and steps. Methods OPTIGOV was developed in 2006 by the Institute of Hygiene of the Catholic University of the Sacred Heart and Eurogroup Consulting Alliance. The main steps of the process were: choice of areas for analysis and questionnaire development, based on a review of scientific literature; assignment of scores and weights to individual questions and areas; implementation of a software interfaceable with Microsoft Office. Results OPTIGOV consists of: a a hospital audit with a structured approach; b development of an improvement operational plan. A questionnaire divided into 13 areas of analysis is used. For each area there is a form with a variable number of questions and "closed" answers. A score is assigned to each answer, area of analysis, healthcare department and unit. The single scores can be gathered for the organization as a whole. The software application allows for collation of data, calculation of scores and development of benchmarks to allow comparisons between healthcare organizations. Implementation consists of three stages: the preparation phase includes a kick off meeting, selection of interviewees and development of a survey plan. The registration phase includes hospital audits, reviewing of hospital documentation, data collection and score processing. Lastly, results are processed, inserted into a final report, and discussed in a meeting with the Hospital Board and in a final workshop. Conclusions The OPTIGOV methodology for the evaluation of CG implementation was

  13. Investigation of optimal seismic design methodology for piping systems supported by elasto-plastic dampers. Part 1. Evaluation functions

    International Nuclear Information System (INIS)

    Ito, Tomohiro; Michiue, Masashi; Fujita, Katsuhisa

    2009-01-01

    In this study, the optimal seismic design methodology that can consider the structural integrity of not only the piping systems but also elasto-plastic supporting devices is developed. This methodology employs a genetic algorithm and can search the optimal conditions such as the supporting location, capacity and stiffness of the supporting devices. Here, a lead extrusion damper is treated as a typical elasto-plastic damper. Four types of evaluation functions are considered. It is found that the proposed optimal seismic design methodology is very effective and can be applied to the actual seismic design for piping systems supported by elasto-plastic dampers. The effectiveness of the evaluation functions is also clarified. (author)

  14. Integrating environmental restoration management within DOE using an alternative identification and evaluation procedure: A methodology and a case history

    International Nuclear Information System (INIS)

    Devaurs, M.; Brooks, D.; Kelly, E.; Wagner, S.; Vocke, R.

    1992-01-01

    The process of identifying and evaluating alternative corrective measures is a fundamental integrating part of Environmental Restoration (ER) activities. The process used in the Los Alamos National Laboratory (the Laboratory) ER Program is based on principles and tools from multiattribute decision analysis, a well-developed and proven method for evaluating options in decision situations involving multiple objectives, uncertainty, multiple interested stakeholders in the final decision, and the need for technical input from disparate disciplines. The process provides a methodology that has been extensively developed and reviewed over the past five decades; it provides a methodological structure for incorporating the concepts espoused in the streamlined approach as well as more specific guidelines such as data quality objectives (DQOs). The application of this methodology to the ER Program at Los Alamos is described in this paper

  15. Properties of ABNT 41xx and 86xx cast steel modified with niobium; evaluation methodology and experimental preliminary results

    International Nuclear Information System (INIS)

    Suzczynski, E.F.; Chatterjee, S.; Mueller, Arno

    1982-01-01

    The experimental methodology to evaluate the mechanical properties of ABNT 41xx and 86xx steels modified with NB in the as cast and heat treated conditions and the first preliminary results obtained in a laboratory scale, are presented. (Author) [pt

  16. Cost and Information Effectiveness Analysis (CIEA): A Methodology for Evaluating a Training Device Operational Readiness Assessment Capability (DORAC).

    Science.gov (United States)

    1981-02-01

    Report 528 COST AIND I*FO•?JidTH ?i EFFECT•• ES1BS ANALYSIS (CDEA): A METiBLOBU Y FOR EVALUATIN1G A TRAINING DEMCE OPERATMDN1AL MAEA3 ],SE 3SSESS$ iElT ...8217, N. Within a military setting, the uses of training devices in performance evaluation have generally mirrored civilian uses and primarily...Technical Report 528 COST AND INFORMATION EFFECTIVENESS ANALYSIS (CIEA): A METHODOLOGY FOR EVALUATING A TRAINING DEVICE OPERATIONAL READINESS

  17. Development and interval testing of a naturalistic driving methodology to evaluate driving behavior in clinical research.

    Science.gov (United States)

    Babulal, Ganesh M; Addison, Aaron; Ghoshal, Nupur; Stout, Sarah H; Vernon, Elizabeth K; Sellan, Mark; Roe, Catherine M

    2016-01-01

    Background : The number of older adults in the United States will double by 2056. Additionally, the number of licensed drivers will increase along with extended driving-life expectancy. Motor vehicle crashes are a leading cause of injury and death in older adults. Alzheimer's disease (AD) also negatively impacts driving ability and increases crash risk. Conventional methods to evaluate driving ability are limited in predicting decline among older adults. Innovations in GPS hardware and software can monitor driving behavior in the actual environments people drive in. Commercial off-the-shelf (COTS) devices are affordable, easy to install and capture large volumes of data in real-time. However, adapting these methodologies for research can be challenging. This study sought to adapt a COTS device and determine an interval that produced accurate data on the actual route driven for use in future studies involving older adults with and without AD.  Methods : Three subjects drove a single course in different vehicles at different intervals (30, 60 and 120 seconds), at different times of day, morning (9:00-11:59AM), afternoon (2:00-5:00PM) and night (7:00-10pm). The nine datasets were examined to determine the optimal collection interval. Results : Compared to the 120-second and 60-second intervals, the 30-second interval was optimal in capturing the actual route driven along with the lowest number of incorrect paths and affordability weighing considerations for data storage and curation. Discussion : Use of COTS devices offers minimal installation efforts, unobtrusive monitoring and discreet data extraction.  However, these devices require strict protocols and controlled testing for adoption into research paradigms.  After reliability and validity testing, these devices may provide valuable insight into daily driving behaviors and intraindividual change over time for populations of older adults with and without AD.  Data can be aggregated over time to look at changes

  18. Development and Evaluation of a Training Program for Organ Procurement Coordinators Using Standardized Patient Methodology.

    Science.gov (United States)

    Odabasi, Orhan; Elcin, Melih; Uzun Basusta, Bilge; Gulkaya Anik, Esin; Aki, Tuncay F; Bozoklar, Ata

    2015-12-01

    The low rate of consent by next of kin of donor-eligible patients is a major limiting factor in organ transplant. Educating health care professionals about their role may lead to measurable improvements in the process. Our aim was to describe the developmental steps of a communication skills training program for health care professionals using standardized patients and to evaluate the results. We developed a rubric and 5 cases for standardized family interviews. The 20 participants interviewed standardized families at the beginning and at the end of the training course, with interviews followed by debriefing sessions. Participants also provided feedback before and after the course. The performance of each participant was assessed by his or her peers using the rubric. We calculated the generalizability coefficient to measure the reliability of the rubric and used the Wilcoxon signed rank test to compare achievement among participants. Statistical analyses were performed with SPSS software (SPSS: An IBM Company, version 17.0, IBM Corporation, Armonk, NY, USA). All participants received higher scores in their second interview, including novice participants who expressed great discomfort during their first interview. The participants rated the scenarios and the standardized patients as very representative of real-life situations, with feedback forms showing that the interviews, the video recording sessions, and the debriefing sessions contributed to their learning. Our program was designed to meet the current expectations and implications in the field of donor consent from next of kin. Results showed that our training program developed using standardized patient methodology was effective in obtaining the communication skills needed for family interviews during the consent process. The rubric developed during the study was a valid and reliable assessment tool that could be used in further educational activities. The participants showed significant improvements in

  19. Pollution prevention through energy efficiency: methodology for evaluating greenhouse gas reductions

    International Nuclear Information System (INIS)

    Widge, V.; Arnold, F.; Karmali, A.

    1992-01-01

    This paper outlines an analytical framework for evaluating the potential for greenhouse gas emission reductions through investments in energy efficiency. In particular, it will describe a model called the Energy and Technology Switching (ETS) model which has been developed at ICF Incorporated. The ETS model has several useful capabilities - it can assess the implications of changing the energy efficiency of new shipments and existing stock of equipment and appliances, or even changes in patterns of fuel use. The ETS model predicts energy use, emissions of related carbon dioxide and other greenhouse gases, and private and social costs (such as energy costs, avoided capital and fuel costs). It also tracks changes in fuel and technology use over time for a user specified end-use application. The paper is organized into three parts: - The first part of the paper describes the methodology used in estimating the reduction in greenhouse gas emissions and the associated net costs of policies that could affect energy use. - In order to demonstrate the model's capabilities, in the second part of the paper, a sample analysis is presented. ICF incorporated has used the ETS model to estimate for the Global Change Division of the U.S. Environmental Protection Agency the costs of reducing greenhouse gas emissions in the residential and commercial sectors of the U.S. economy, encompassing a wide range of technologies and fuel-types. The assumptions and results of this analysis are presented. - Finally, the paper outlines some of the potential uses of this model in assessing pollution prevention opportunities through energy efficient measures. 11 figs

  20. San Luis Basin Sustainability Metrics Project: A Methodology for Evaluating Regional Sustainability

    Science.gov (United States)

    Although there are several scientifically-based sustainability metrics, many are data intensive, difficult to calculate, and fail to capture all aspects of a system. To address these issues, we produced a scientifically-defensible, but straightforward and inexpensive, methodolog...

  1. Development of methodology for evaluation of long-term safety aspects of organic cement paste components

    International Nuclear Information System (INIS)

    Andersson, M.; Holgersson, S.; Ervanne, H.

    2008-12-01

    Long-term safety aspects of superplasticizers (SP) and other cement paste components were studied in this joint Nagra - NUMO - SKB - Posiva project with aim to develop a methodology for the evaluation of the long-term safety aspects of superplasticizers (SP) and other organic components of cement pastes. The study also evaluated the effects of SPs and other cement paste components that have already been used or that are most likely to be used in the construction of the high-level nuclear waste repositories in Sweden, Switzerland, Finland and Japan. The main long-term safety issue of concern is whether the superplasticizers and/or other organic components of cement pastes might affect the transport properties of radionuclides. A full evaluation of whether the superplasticizers can be used in a high-level nuclear waste repository cannot be answered based on the studies but a classification of the superplasticizers based on their impact on sorption of radionuclides has been done. The basic methodology for testing, leaching and analyzing of leachants and solid samples of different types was developed at CRIEPI. Two different methodologies for studying the impact of SPs on the sorption of Eu on crushed rock were tested and developed by Helsinki University (HU) and Chalmers University of Technology (CTH). Methods for analyzing organics leaching from grouts were successfully tested by CRIEPI and CTH (Chalmers University of Technology). At CRIEPI the total organic content (TOC) of the leachants was analyzed by Infrared absorption spectrometry (IR) followed by Gel Permeation Chromatography (GPC) for the identification of the organic compounds. At CTH several different analytical methods were tested (e.g. IR, UV spectroscopy, NMR, MALDI-TOF), but these methods still require improvement. In addition to SPs, organics are present in several components of cement pastes, for example in cement grinding aid (CGA) and micro silica slurry. The results suggests that the main high

  2. Methodology for evaluation of alternative technologies applied to nuclear fuel reprocessing

    International Nuclear Information System (INIS)

    Selvaduray, G.S.; Goldstein, M.K.; Anderson, R.N.

    1977-07-01

    An analytic methodology has been developed to compare the performance of various nuclear fuel reprocessing techniques for advanced fuel cycle applications including low proliferation risk systems. The need to identify and to compare those processes, which have the versatility to handle the variety of fuel types expected to be in use in the next century, is becoming increasingly imperative. This methodology allows processes in any stage of development to be compared and to assess the effect of changing external conditions on the process

  3. Adaptation of EVIAVE methodology for monitoring and follow-up when evaluating the environmental impact of landfills

    International Nuclear Information System (INIS)

    Arrieta, Gabriela; Requena, Ignacio; Toro, Javier; Zamorano, Montserrat

    2016-01-01

    Treatment and final disposal of Municipal Solid Waste can have a significant role in the generation of negative environmental impacts. As a prevention strategy, such activities are subjected to the process of Environmental Impact Assessment (EIA). Still, the follow-up of Environmental Management Plans or mitigation measures is limited, for one due to a lack of methodological approaches. In searching for possibilities, the University of Granada (Spain) developed a diagnostic methodology named EVIAVE, which allows one to quantify, by means of indexes, the environmental impact of landfills in view of their location and the conditions of exploitation. EVIAVE is applicable within the legal framework of the European Union and can be adapted to the environmental and legal conditions of other countries. This study entails its adaptation in Colombia, for the follow-up and control of the EIA process for landfills. Modifications involved inclusion of the environmental elements flora and fauna, and the evaluation of the environmental descriptors in agreement with the concept of vulnerability. The application of the modified EVIAVE in Colombian landfills allowed us to identify the elements affected by the operating conditions and maintenance. It may be concluded that this methodology is viable and effective for the follow-up and environmental control of EIA processes for landfills, and to analyze the associated risks, as it takes into account related environmental threats and vulnerabilities. - Highlights: • A modified methodology is used to monitor and follow-up environmental impacts in landfills. • The improved methodology includes the Vulnerability of Flora and Fauna to evaluate environmental impact of landfills. • The methodology serves to identify and evaluate the sources of risk generated in the construction and siting of landfills. • Environmental vulnerability indicators improve effectiveness of the control and follow-up phases of landfill management. • The

  4. Adaptation of EVIAVE methodology for monitoring and follow-up when evaluating the environmental impact of landfills

    Energy Technology Data Exchange (ETDEWEB)

    Arrieta, Gabriela, E-mail: tonina1903@hotmail.com [Department of Civil Engineering, University of Granada (Spain); Requena, Ignacio, E-mail: requena@decsai.ugr.es [Department of Computer Science and Artificial Intelligence, University of Granada (Spain); Toro, Javier, E-mail: jjtoroca@unal.edu.co [Universidad Nacional de Colombia — Sede Bogotá, Instituto de Estudios Ambientales (Colombia); Zamorano, Montserrat, E-mail: zamorano@ugr.es [Department of Civil Engineering, University of Granada (Spain)

    2016-01-15

    Treatment and final disposal of Municipal Solid Waste can have a significant role in the generation of negative environmental impacts. As a prevention strategy, such activities are subjected to the process of Environmental Impact Assessment (EIA). Still, the follow-up of Environmental Management Plans or mitigation measures is limited, for one due to a lack of methodological approaches. In searching for possibilities, the University of Granada (Spain) developed a diagnostic methodology named EVIAVE, which allows one to quantify, by means of indexes, the environmental impact of landfills in view of their location and the conditions of exploitation. EVIAVE is applicable within the legal framework of the European Union and can be adapted to the environmental and legal conditions of other countries. This study entails its adaptation in Colombia, for the follow-up and control of the EIA process for landfills. Modifications involved inclusion of the environmental elements flora and fauna, and the evaluation of the environmental descriptors in agreement with the concept of vulnerability. The application of the modified EVIAVE in Colombian landfills allowed us to identify the elements affected by the operating conditions and maintenance. It may be concluded that this methodology is viable and effective for the follow-up and environmental control of EIA processes for landfills, and to analyze the associated risks, as it takes into account related environmental threats and vulnerabilities. - Highlights: • A modified methodology is used to monitor and follow-up environmental impacts in landfills. • The improved methodology includes the Vulnerability of Flora and Fauna to evaluate environmental impact of landfills. • The methodology serves to identify and evaluate the sources of risk generated in the construction and siting of landfills. • Environmental vulnerability indicators improve effectiveness of the control and follow-up phases of landfill management. • The

  5. Development of evaluation methodology to assess the sodium fire suppression performance of leak collection tray

    International Nuclear Information System (INIS)

    Parida, F.C.; Rao, P.M.; Ramesh, S.S.; Somayajulu, P.A.; Malarvizhi, B.; Kannan, S.E.

    2005-01-01

    Full text of publication follows: Leakage of hot liquid sodium and its subsequent combustion in the form of a pool cannot be completely ruled out in a Fast breeder Reactor (FBR) plant in spite of provision for adequate safety measures. To protect the plant system from the hazardous effects of flame, heat and smoke, one of the passive protection devices used in FBR plants is the Leak Collection Tray (LCT). The design of LCT is based on immediate channeling of burning liquid sodium on the funnel shaped sloping cover tray (SCT) to the bottom sodium hold-up vessel (SHV) in which self-extinction of the fire occurs due to oxygen starvation. The SCT has one or three drain pipes and air vent pipes depending on the type of design. In each experiment, a known amount ranging from 30 to 40 kg of hot liquid sodium at 550 deg. C was discharged on the LCT in the open air. Continuous on-line monitoring of temperature at strategic locations (∼ 28 points) was carried out. Colour video-graphy was employed for taking motion pictures of various time-dependent events like sodium dumping, appearance of flame and release of smoke through vent pipes. After self-extinction of sodium fire, the LCT was allowed to cool overnight in an argon atmosphere. Solid samples of sodium debris in the SCT and SHV were collected by manual core drilling machine. The samples were subjected to chemical analysis for determination of unburnt and burnt sodium. The sodium debris removed from SCT and SHV were separately weighed. To assess the performance of the LCT, two different geometrical configurations of SCT, one made up of stainless steel an the other of carbon steel, were used. Three broad phenomena are identified as the basis of evaluation methodology. These are (a) thermal transients, i.e. heating and cooling of the bulk sodium in SCT and SHV respectively, (b) post test sodium debris distribution between SCT and SHV as well as (c) sodium combustion and smoke release behaviour. Under each category

  6. Evaluation of methodological aspects of digestibility measurements in ponies fed different haylage to concentrate ratios.

    Science.gov (United States)

    Schaafstra, F J W C; van Doorn, D A; Schonewille, J T; van Riet, M M J; Visser, P; Blok, M C; Hendriks, W H

    2017-11-01

    Methodological aspects of digestibility measurements were studied in four Welsh pony geldings consuming haylage-based diets with increasing proportions of a pelleted concentrate according to a 4×4 Latin square design experiment. Ponies were fed four experimental, iso-energetic (net energy (NE) basis) diets (i.e. 22 MJ NE/day) with increasing proportions of a pelleted concentrate (C) in relation to haylage (H). The absolute amounts of diet dry matter fed per day were 4.48 kg of H (100H), 3.36 and 0.73 kg of H and C (75H25C), 2.24 and 1.45 kg of H and C (50H50C) and 1.12 and 2.17 kg of H and C (25H75C). Diets were supplemented with minerals, vitamins and TiO2 (3.7 g Ti/day). Voluntary voided faeces were quantitatively collected daily during 10 consecutive days and analysed for moisture, ash, ADL, acid-insoluble ash (AIA) and Ti. A minimum faeces collection period of 6 consecutive days, along with a 14-day period to adapt the animals to the diets and become accustomed to the collection procedure, is recommended to obtain accurate estimations on dry matter digestibility and organic matter digestibility (OMD) in equids fed haylage-based diets supplemented with concentrate. In addition, the recovery of AIA, ADL and Ti was determined and evaluated. Mean faecal recovery over 10 consecutive days across diets for AIA, ADL and Ti was 124.9% (SEM 2.9), 108.7% (SEM 2.0) and 97.5% (SEM 0.9), respectively. Cumulative faecal recovery of AIA significantly differed between treatments, indicating that AIA is inadequate to estimate the OMD in equines. In addition, evaluation of the CV of mean cumulative faecal recoveries obtained by AIA, ADL and Ti showed greater variations in faecal excretion of AIA (9.1) and ADL (7.4) than Ti (3.7). The accuracy of prediction of OMD was higher with the use of Ti than ADL. The use of Ti is preferred as a marker in digestibility trials in equines fed haylage-based diets supplemented with increasing amounts of pelleted concentrate.

  7. Development of evaluation methodology to assess the sodium fire suppression performance of leak collection tray

    Energy Technology Data Exchange (ETDEWEB)

    Parida, F.C.; Rao, P.M.; Ramesh, S.S.; Somayajulu, P.A.; Malarvizhi, B.; Kannan, S.E. [Engineering Safety Division, Safety Group, Indira Gandhi Centre for Atomic Research, Kalpakkam - 603102, Tamilnadu (India)

    2005-07-01

    Full text of publication follows: Leakage of hot liquid sodium and its subsequent combustion in the form of a pool cannot be completely ruled out in a Fast breeder Reactor (FBR) plant in spite of provision for adequate safety measures. To protect the plant system from the hazardous effects of flame, heat and smoke, one of the passive protection devices used in FBR plants is the Leak Collection Tray (LCT). The design of LCT is based on immediate channeling of burning liquid sodium on the funnel shaped sloping cover tray (SCT) to the bottom sodium hold-up vessel (SHV) in which self-extinction of the fire occurs due to oxygen starvation. The SCT has one or three drain pipes and air vent pipes depending on the type of design. In each experiment, a known amount ranging from 30 to 40 kg of hot liquid sodium at 550 deg. C was discharged on the LCT in the open air. Continuous on-line monitoring of temperature at strategic locations ({approx} 28 points) was carried out. Colour video-graphy was employed for taking motion pictures of various time-dependent events like sodium dumping, appearance of flame and release of smoke through vent pipes. After self-extinction of sodium fire, the LCT was allowed to cool overnight in an argon atmosphere. Solid samples of sodium debris in the SCT and SHV were collected by manual core drilling machine. The samples were subjected to chemical analysis for determination of unburnt and burnt sodium. The sodium debris removed from SCT and SHV were separately weighed. To assess the performance of the LCT, two different geometrical configurations of SCT, one made up of stainless steel an the other of carbon steel, were used. Three broad phenomena are identified as the basis of evaluation methodology. These are (a) thermal transients, i.e. heating and cooling of the bulk sodium in SCT and SHV respectively, (b) post test sodium debris distribution between SCT and SHV as well as (c) sodium combustion and smoke release behaviour. Under each category

  8. Proposal of a methodology for evaluation of internal occupational exposure by Fluorine-18

    International Nuclear Information System (INIS)

    Oliveira, Cassio Miri

    2008-01-01

    The increasing use of 18 F for diagnostic procedures in nuclear medicine through PET technology leads to the growth in the number of occupationally exposed workers to this radionuclide, and consequently, increases up the probability of incorporation of this radionuclide. The external and internal exposures may occur during its clinical application 18 FDG and mainly during its production. Workers involved in such activities are usually monitored routinely for the control of external exposure. However it is important to provide methods for internal monitoring promptly after a suspicion of incorporation. Therefore, the objective of this work is to develop procedures for internal monitoring of 18 F to be applied in cases of possible incorporation of ions fluoride and 18 FDG radiopharmaceutical, using in vivo and in vitro methods of measurements. The NaI(Tl) 8'' x 4'' scintillation detector of the IRD-Whole Body Counter was calibrated for in vivo measurements with a whole body anthropomorphic phantom simulating incorporation by 18 F in the form of fluoride ions due to the homogeneous distribution of this substance in the body. The Nal(Tl) 3'' x 3'' scintillation detector of the IRD-Whole Body Counter was calibrated for in vivo measurements with a brain phantom inserted in an artificial skull simulating incorporation by 18 F in the form 18FDG due to the high absorption of this substance by brain. HPGe detection system of the IRD-Bioassay Laboratory was calibrated for in vitro measurements of urine samples. It was used 1 liter plastic bottles containing standardized radioactive source. A methodology for bioassay data interpretation based on standard ICRP models edited with the software AIDE-version 6 was established. It is concluded that in vivo measurements for the evaluation of incorporation of 18 F in the form of fluoride and 18 FDG have sufficient sensitivity to detect effective doses of 4,4 x 10 -6 and 1,55 x 10 5 mSv, respectively, i.e., below the recording level of

  9. Risk-informed analysis of the large break loss of coolant accident and PCT margin evaluation with the RISMC methodology

    International Nuclear Information System (INIS)

    Liang, T.H.; Liang, K.S.; Cheng, C.K.; Pei, B.S.; Patelli, E.

    2016-01-01

    Highlights: • With RISMC methodology, both aleatory and epistemic uncertainties have been considered. • 14 probabilistically significant sequences have been identified and quantified. • A load spectrum for LBLOCA has been conducted with CPCT and SP of each dominant sequence. • Comparing to deterministic methodologies, the risk-informed PCT margin can be greater by 44–62 K. • The SP of the referred sequence to cover 99% in the load spectrum is only 5.07 * 10 −3 . • The occurrence probability of the deterministic licensing sequence is 5.46 * 10 −5 . - Abstract: For general design basis accidents, such as SBLOCA and LBLOCA, the traditional deterministic safety analysis methodologies are always applied to analyze events based on a so called surrogate or licensing sequence, without considering how low this sequence occurrence probability is. In the to-be-issued 10 CFR 50.46a, the LBLOCA will be categorized as accidents beyond design basis and the PCT margin shall be evaluated in a risk-informed manner. According to the risk-informed safety margin characterization (RISMC) methodology, a process has been suggested to evaluate the risk-informed PCT margin. Following the RISMC methodology, a load spectrum of PCT for LBLOCA has been generated for the Taiwan’s Maanshan Nuclear Power plant and 14 probabilistic significant sequences have been identified. It was observed in the load spectrum that the conditional PCT generally ascends with the descending sequence occurrence probability. With the load spectrum covering both aleatory and epistemic uncertainties, the risk-informed PCT margin can be evaluated by either expecting value estimation method or sequence probability coverage method. It was found that by comparing with the traditional deterministic methodology, the PCT margin evaluated by the RISMC methodology can be greater by 44–62 K. Besides, to have a cumulated occurrence probability over 99% in the load spectrum, the occurrence probability of the

  10. Social exclusion in academia through biases in methodological quality evaluation: On the situation of women in science and philosophy.

    Science.gov (United States)

    Leuschner, Anna

    2015-12-01

    Empirical studies show that academia is socially exclusive. I argue that this social exclusion works, at least partly, through the systematic methodological disqualification of contributions from members of underrepresented social groups. As methodological quality criteria are underdetermined their interpretation and weighting can be biased with relation to gender, race, social background, etc. Such biased quality evaluation can take place on a local or global level. The current situation of women in academic philosophy illuminates this. I conclude that only mechanical solutions can effectively change the situation. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Risk-informed analysis of the large break loss of coolant accident and PCT margin evaluation with the RISMC methodology

    Energy Technology Data Exchange (ETDEWEB)

    Liang, T.H. [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101 Sec. 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Liang, K.S., E-mail: ksliang@alum.mit.edu [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101 Sec. 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Cheng, C.K.; Pei, B.S. [Institute of Nuclear Engineering and Science, National Tsing Hua University, 101 Sec. 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Patelli, E. [Institute of Risk and Uncertainty, University of Liverpool, Room 610, Brodie Tower, L69 3GQ (United Kingdom)

    2016-11-15

    Highlights: • With RISMC methodology, both aleatory and epistemic uncertainties have been considered. • 14 probabilistically significant sequences have been identified and quantified. • A load spectrum for LBLOCA has been conducted with CPCT and SP of each dominant sequence. • Comparing to deterministic methodologies, the risk-informed PCT margin can be greater by 44–62 K. • The SP of the referred sequence to cover 99% in the load spectrum is only 5.07 * 10{sup −3}. • The occurrence probability of the deterministic licensing sequence is 5.46 * 10{sup −5}. - Abstract: For general design basis accidents, such as SBLOCA and LBLOCA, the traditional deterministic safety analysis methodologies are always applied to analyze events based on a so called surrogate or licensing sequence, without considering how low this sequence occurrence probability is. In the to-be-issued 10 CFR 50.46a, the LBLOCA will be categorized as accidents beyond design basis and the PCT margin shall be evaluated in a risk-informed manner. According to the risk-informed safety margin characterization (RISMC) methodology, a process has been suggested to evaluate the risk-informed PCT margin. Following the RISMC methodology, a load spectrum of PCT for LBLOCA has been generated for the Taiwan’s Maanshan Nuclear Power plant and 14 probabilistic significant sequences have been identified. It was observed in the load spectrum that the conditional PCT generally ascends with the descending sequence occurrence probability. With the load spectrum covering both aleatory and epistemic uncertainties, the risk-informed PCT margin can be evaluated by either expecting value estimation method or sequence probability coverage method. It was found that by comparing with the traditional deterministic methodology, the PCT margin evaluated by the RISMC methodology can be greater by 44–62 K. Besides, to have a cumulated occurrence probability over 99% in the load spectrum, the occurrence probability

  12. A methodology to enable rapid evaluation of aviation environmental impacts and aircraft technologies

    Science.gov (United States)

    Becker, Keith Frederick

    -processing, which does not capture physical interdependencies that may arise at the aircraft-level. The goal of the work that has been conducted here was the development of a methodology to develop surrogate fleet approaches that leverage the capability of physics-based aircraft models and the development of connectivity to fleet-level analysis tools to enable rapid evaluation of fuel burn and emissions metrics. Instead of requiring development of an individual physics-based model for each vehicle in the fleet, the surrogate fleet approaches seek to reduce the number of such models needed while still accurately capturing performance of the fleet. By reducing the number of models, both development time and execution time to generate fleet-level results may also be reduced. The initial steps leading to surrogate fleet formulation were a characterization of the commercial fleet into groups based on capability followed by the selection of a reference vehicle model and a reference set of operations for each group. Next, three potential surrogate fleet approaches were formulated. These approaches include the parametric correction factor approach, in which the results of a reference vehicle model are corrected to match the aggregate results of each group; the average replacement approach, in which a new vehicle model is developed to generate aggregate results of each group, and the best-in-class replacement approach, in which results for a reference vehicle are simply substituted for the entire group. Once candidate surrogate fleet approaches were developed, they were each applied to and evaluated over the set of reference operations. Then each approach was evaluated for their ability to model variations in operations. Finally, the ability of each surrogate fleet approach to capture implementation of different technology suites along with corresponding interdependencies between fuel burn and emissions was evaluated using the concept of a virtual fleet to simulate the technology response

  13. Application of the SAMINT methodology to the new cross section evaluations of 63Cu and 65Cu∗

    Directory of Open Access Journals (Sweden)

    Sobes Vladimir

    2017-01-01

    Full Text Available The SAMINT methodology allows coupling of differential and integral data evaluations in a continuous-energy framework. Prior to development of the SAMINT code, integral experimental data such as in the International Criticality Safety Benchmark Experiments Project remained a tool for validation of completed nuclear data evaluations. Now, SAMINT extracts information from integral benchmarks in the form of calculated sensitivity coefficients by Monte Carlo codes such as CE TSUNAMI-3D or MCNP6 and combines it with the results of experimental cross section measurements to produce an updated cross section evaluation utilizing information from both sets of data. The use of the generalized linear least squares methodology ensures that proper weight is given to both the differential and integral data. SAMINT is not intended to bias nuclear data toward specific integral experiments, but it should be used to supplement evaluation of differential experimental data. This work demonstrates the application of the SAMINT methodology to the new Oak Ridge National Laboratory (ORNL evaluations of the resonance parameters for two isotopes of copper: 63Cu and 65Cu.

  14. A methodology for evaluating weighting functions using MCNP and its application to PWR ex-core analyses

    International Nuclear Information System (INIS)

    Pecchia, Marco; Vasiliev, Alexander; Ferroukhi, Hakim; Pautz, Andreas

    2017-01-01

    Highlights: • Evaluation of neutron source importance for a given tally. • Assessment of ex-core detector response plus its uncertainty. • Direct use of neutron track evaluated by a Monte Carlo neutron transport code. - Abstract: The ex-core neutron detectors are commonly used to control reactor power in light water reactors. Therefore, it is relevant to understand the importance of a neutron source to the ex-core detectors response. In mathematical terms, this information is conveniently represented by the so called weighting functions. A new methodology based on the MCNP code for evaluating the weighting functions starting from the neutron history database is presented in this work. A simultaneous evaluation of the weighting functions in a user-given Cartesian coverage mesh is the main advantage of the method. The capability to generate weighting functions simultaneously in both spatial and energy ranges is the innovative part of this work. Then, an interpolation tool complements the methodology, allowing the generation of weighting functions up to the pin-by-pin fuel segment, where a direct evaluation is not possible due to low statistical precision. A comparison to reference results provides a verification of the methodology. Finally, an application to investigate the role of ex-core detectors spatial location and core burnup for a Swiss nuclear power plant is provided.

  15. [Methodological quality and reporting quality evaluation of randomized controlled trials published in China Journal of Chinese Materia Medica].

    Science.gov (United States)

    Yu, Dan-Dan; Xie, Yan-Ming; Liao, Xing; Zhi, Ying-Jie; Jiang, Jun-Jie; Chen, Wei

    2018-02-01

    To evaluate the methodological quality and reporting quality of randomized controlled trials(RCTs) published in China Journal of Chinese Materia Medica, we searched CNKI and China Journal of Chinese Materia webpage to collect RCTs since the establishment of the magazine. The Cochrane risk of bias assessment tool was used to evaluate the methodological quality of RCTs. The CONSORT 2010 list was adopted as reporting quality evaluating tool. Finally, 184 RCTs were included and evaluated methodologically, of which 97 RCTs were evaluated with reporting quality. For the methodological evaluating, 62 trials(33.70%) reported the random sequence generation; 9(4.89%) trials reported the allocation concealment; 25(13.59%) trials adopted the method of blinding; 30(16.30%) trials reported the number of patients withdrawing, dropping out and those lost to follow-up;2 trials (1.09%) reported trial registration and none of the trial reported the trial protocol; only 8(4.35%) trials reported the sample size estimation in details. For reporting quality appraising, 3 reporting items of 25 items were evaluated with high-quality,including: abstract, participants qualified criteria, and statistical methods; 4 reporting items with medium-quality, including purpose, intervention, random sequence method, and data collection of sites and locations; 9 items with low-quality reporting items including title, backgrounds, random sequence types, allocation concealment, blindness, recruitment of subjects, baseline data, harms, and funding;the rest of items were of extremely low quality(the compliance rate of reporting item<10%). On the whole, the methodological and reporting quality of RCTs published in the magazine are generally low. Further improvement in both methodological and reporting quality for RCTs of traditional Chinese medicine are warranted. It is recommended that the international standards and procedures for RCT design should be strictly followed to conduct high-quality trials

  16. [Efficiency versus quality in the NHS, in Portugal: methodologies for evaluation].

    Science.gov (United States)

    Giraldes, Maria do Rosário

    2008-01-01

    To proceed to the evaluation of the efficiency and quality in the NHS, based in methodologies of evaluation of management, indicators of benchmarking and indicators of process and outcome. The 1980 and 1990 decades have seen the proliferation of all forms of process indicators as a way to control health services. It is not a coincidence that the increase in managed care has been accompanied by an explosion of process indicators, as it has happened in the health system of the USA. More recently the attention has turned away from measures of performance, which measure the process (what has been done) to those which measure outcomes (what was the result). Quality indicators have been developed in Europe, first to be used in hospitals, but also to be used in primary health care. Conceptually the justification for the introduction of process indicators comes from the principle that their use will reinforce a modification in the quality of the proceedings, which will give origin to better outcomes as well at population level, as resource saving. Outcome indicators compared with process indicators in health care shows that process indicators have the advantage of being more sensitive than outcome indicators to differences in the quality. Optimizing health care quality has the objective of establishing a quantitative relationship between the quality of the health services and cost-effectiveness. To identify quality indicators and benchmarking and to implement plans to measure the quality of health care. In a study made in a group of senior GP, in the UK, with the objective of determining which process indicators better reflect the quality of the services in primary health care services a Delphi method was used. Only seven indicators were chosen by 75% of the respondents: the percentage of eligible patients receiving cervical screening; the percentage of generic prescribing; the percentage of eligible patients receiving childhood immunization; the percentage of eligible

  17. Review of Seismic Evaluation Methodologies for Nuclear Power Plants Based on a Benchmark Exercise

    International Nuclear Information System (INIS)

    2013-11-01

    quantification of the effect of different analytical approaches on the response of the piping system under single and multi-support input motions), the spent fuel pool (to estimate the sloshing frequencies, maximum wave height and spilled water amount, and predict free surface evolution), and the pure water tank (to predict the observed buckling modes of the pure water tank). Analyses of the main results include comparison between different computational models, variability of results among participants, and comparison of analysis results with recorded ones. This publication addresses state of the practice for seismic evaluation and margin assessment methodologies for SSCs in NPPs based on the KARISMA benchmark exercise. As such, it supports and complements other IAEA publications with respect to seismic safety of new and existing nuclear installations. It was developed within the framework of International Seismic Safety Centre activities. It provides detailed guidance on seismic analysis, seismic design and seismic safety re-evaluation of nuclear installations and will be of value to researchers, operating organizations, regulatory authorities, vendors and technical support organizations

  18. Methodology for the evaluation of tolerability of defects in WWER-1000/V-320 reactor pressure vessels

    International Nuclear Information System (INIS)

    Brumovsky, M.; Horacek, L.; Ruscak, M.

    1996-05-01

    The methodology provides guidelines for the assessment of tolerability of defects found during in-service inspection of the base material and overlay of WWER-1000/V-320 type reactor pressure vessels. With regard to the method of calculating the tolerability of defects and rules for the preparation and implementation of repairs, this methodology can also find use in the assessment of tolerability of defects in selected facilities of WWER-1000/V-320 type nuclear power plants provided that adequate input data concerning the materials, manufacturing technology, and operating load regime are available and that the facilities are made of ferrite/bainite type steels. This methodology should serve as a binding document underlying the development of a technical approach to provisions for a further operation of facilities in which intolerable defects have been found by nondestructive testing. (author)

  19. Municipal solid waste composition: Sampling methodology, statistical analyses, and case study evaluation

    DEFF Research Database (Denmark)

    Edjabou, Vincent Maklawe Essonanawe; Jensen, Morten Bang; Götze, Ramona

    2015-01-01

    Sound waste management and optimisation of resource recovery require reliable data on solid waste generation and composition. In the absence of standardised and commonly accepted waste characterisation methodologies, various approaches have been reported in literature. This limits both...... comparability and applicability of the results. In this study, a waste sampling and sorting methodology for efficient and statistically robust characterisation of solid waste was introduced. The methodology was applied to residual waste collected from 1442 households distributed among 10 individual sub......-areas in three Danish municipalities (both single and multi-family house areas). In total 17 tonnes of waste were sorted into 10-50 waste fractions, organised according to a three-level (tiered approach) facilitating,comparison of the waste data between individual sub-areas with different fractionation (waste...

  20. Methodology of environmental evaluation of wastes stabilized/solidified by hydraulic binders; Methodologie d'evaluation environnementale des dechets stabilises / solidifies par liants hydrauliques

    Energy Technology Data Exchange (ETDEWEB)

    Imyim, A.

    2000-12-15

    The aim of this work is the formalization of a methodology of evaluation of the leaching behaviour of massive porous materials obtained by stabilization/solidification of wastes. In a first part, a set of simple leaching tests is proposed which allow the physico-chemical characterization of materials. In order to better understand the phenomena involved in the release process, the methodology has been applied to hydraulic binder-based and lead-bearing synthesized materials. In a second step, a mathematical model has been proposed for the description of the leaching behaviour. The development of the model is based on the observations and experimental results obtained with the synthesized materials. Finally, the methodology of evaluation of the leaching behaviour has been applied to two cases of real wastes: the fly ashes of a Danish municipal waste incineration facility, and the galvanic sludges from an industrial waste water processing facility from Netherlands. (J.S.)

  1. Applying Costs, Risks and Values Evaluation (CRAVE) methodology to Engineering Support Request (ESR) prioritization

    Science.gov (United States)

    Joglekar, Prafulla N.

    1994-01-01

    Given limited budget, the problem of prioritization among Engineering Support Requests (ESR's) with varied sizes, shapes, and colors is a difficult one. At the Kennedy Space Center (KSC), the recently developed 4-Matrix (4-M) method represents a step in the right direction as it attempts to combine the traditional criteria of technical merits only with the new concern for cost-effectiveness. However, the 4-M method was not adequately successful in the actual prioritization of ESRs for the fiscal year 1995 (FY95). This research identifies a number of design issues that should help us to develop better methods. It emphasizes that given the variety and diversity of ESR's one should not expect that a single method could help in the assessment of all ESR's. One conclusion is that a methodology such as Costs, Risks, and Values Evaluation (CRAVE) should be adopted. It also is clear that the development of methods such as 4-M requires input not only from engineers with technical expertise in ESR's but also from personnel with adequate background in the theory and practice of cost-effectiveness analysis. At KSC, ESR prioritization is one part of the Ground Support Working Teams (GSWT) Integration Process. It was discovered that the more important barriers to the incorporation of cost-effectiveness considerations in ESR prioritization lie in this process. The culture of integration, and the corresponding structure of review by a committee of peers, is not conducive to the analysis and confrontation necessary in the assessment and prioritization of ESR's. Without assistance from appropriately trained analysts charged with the responsibility to analyze and be confrontational about each ESR, the GSWT steering committee will continue to make its decisions based on incomplete understanding, inconsistent numbers, and at times, colored facts. The current organizational separation of the prioritization and the funding processes is also identified as an important barrier to the

  2. Methodology for the biosphere analysis in the evaluation of deep geological repositories for high radioactive waste

    International Nuclear Information System (INIS)

    Cancio, D.; Pinedo, P.; Aguero, A.; Simon, I.; Torres, C.; Robles, B.; Smith, G.M.; Little, R.; Watkings, B.; Brice, A.; Jaen, J.A.; Coronado, S.

    1997-01-01

    This report summarizes the work done and the achievements reached within the R and D Project that IMA/CIEMAT has had with ENRESA during 1993-1995. The overal R and D Project has a wide radiological protection context, but the work reported here relates only to the development of a Methodology for considering the Biosphere sub-system in the assessments of deep geological repositories for high radioactive wastes (HLW). The main areas concerned within the Methodology have to do with Biosphere structure and morphology in the long-term relevant to deep disposal of HLW: in the contexts of the assessment of these systems, and appropiate modelling of the behaviour of radionuclides released to the biosphere system and with the associated human exposure. This document first provides a review of the past and present international and national concerns about the biosphere modelling and its importance in relation to the definition of safety criteria. A joint ENRESA/ANDRA/IPSN/CIEMAT study about the definition and proactical descriptions of the biosphere systems under different climatic states is then summarized. The Methodology developed by IMA/CIEMAT is outlined with an illustration of the way it works. Different steps and procedures are included for a better proactical understanding of the software tools developed within the project to support the application of the Methologoy. This Methodology is widely based on an international working group on Reference Biospheres part national work for ENRESA has been supported under a collaborative agreement with QuantiSci Ltd. Specific software development have been carried out in collaboration with QuantiSci Ltd and with the Polytechnical University of Madrid. Most of the items included within the Methodology and moreover the Methodology as a whole, follows a continuos progressive development. It is increasinaly recognized that assessment capabilities, establisment of safety criteria and regulatory framework and the steps in a

  3. Methodology for corrosion evaluation in HAZ of 11%-Cr ferritic stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, Carmem C. F.; Rodrigues, Samul F. [Dept. of Mechanic and MaterialsFederal Institute of Education, Science and Technology of Maranhao, Sao Luis (Brazil); De Morais, Vinicius M.; Vilarinho, Louriel O. [Dept. of Mechanic Engineering, Federal University of Uberlandia, Uberlandia (Brazil)

    2016-08-15

    A novel methodology is proposed for corrosion-wear measurement in the Heat affected zone (HAZ) of 11%-Cr ferritic stainless steel. Weld beads with different stress-concentration were manufactured by using MIG/MAG process. After, the welded sample is extracted from the plate, the beads were bended and external stress was applied. Finally, they were inserted in ferric-chloride solution. Corrosive wear were assessed by means of optical microscopy in the HAZ by using polymeric resin mask and comparing profiles before and after inserting the sample into the solution. The results demonstrate the feasibility of the proposed methodology for assessing corrosive wear in the HAZ.

  4. Evaluation of dose from kV cone-beam computed tomography during radiotherapy: a comparison of methodologies

    Science.gov (United States)

    Buckley, J.; Wilkinson, D.; Malaroda, A.; Metcalfe, P.

    2017-01-01

    Three alternative methodologies to the Computed-Tomography Dose Index for the evaluation of Cone-Beam Computed Tomography dose are compared, the Cone-Beam Dose Index, IAEA Human Health Report No. 5 recommended methodology and the AAPM Task Group 111 recommended methodology. The protocols were evaluated for Pelvis and Thorax scan modes on Varian® On-Board Imager and Truebeam kV XI imaging systems. The weighted planar average dose was highest for the AAPM methodology across all scans, with the CBDI being the second highest overall. A 17.96% and 1.14% decrease from the TG-111 protocol to the IAEA and CBDI protocols for the Pelvis mode and 18.15% and 13.10% decrease for the Thorax mode were observed for the XI system. For the OBI system, the variation was 16.46% and 7.14% for Pelvis mode and 15.93% to the CBDI protocol in Thorax mode respectively.

  5. Methodological variation in economic evaluations conducted in low- and middle-income countries: information for reference case development.

    Science.gov (United States)

    Santatiwongchai, Benjarin; Chantarastapornchit, Varit; Wilkinson, Thomas; Thiboonboon, Kittiphong; Rattanavipapong, Waranya; Walker, Damian G; Chalkidou, Kalipso; Teerawattananon, Yot

    2015-01-01

    Information generated from economic evaluation is increasingly being used to inform health resource allocation decisions globally, including in low- and middle- income countries. However, a crucial consideration for users of the information at a policy level, e.g. funding agencies, is whether the studies are comparable, provide sufficient detail to inform policy decision making, and incorporate inputs from data sources that are reliable and relevant to the context. This review was conducted to inform a methodological standardisation workstream at the Bill and Melinda Gates Foundation (BMGF) and assesses BMGF-funded cost-per-DALY economic evaluations in four programme areas (malaria, tuberculosis, HIV/AIDS and vaccines) in terms of variation in methodology, use of evidence, and quality of reporting. The findings suggest that there is room for improvement in the three areas of assessment, and support the case for the introduction of a standardised methodology or reference case by the BMGF. The findings are also instructive for all institutions that fund economic evaluations in LMICs and who have a desire to improve the ability of economic evaluations to inform resource allocation decisions.

  6. Methodological variation in economic evaluations conducted in low- and middle-income countries: information for reference case development.

    Directory of Open Access Journals (Sweden)

    Benjarin Santatiwongchai

    Full Text Available Information generated from economic evaluation is increasingly being used to inform health resource allocation decisions globally, including in low- and middle- income countries. However, a crucial consideration for users of the information at a policy level, e.g. funding agencies, is whether the studies are comparable, provide sufficient detail to inform policy decision making, and incorporate inputs from data sources that are reliable and relevant to the context. This review was conducted to inform a methodological standardisation workstream at the Bill and Melinda Gates Foundation (BMGF and assesses BMGF-funded cost-per-DALY economic evaluations in four programme areas (malaria, tuberculosis, HIV/AIDS and vaccines in terms of variation in methodology, use of evidence, and quality of reporting. The findings suggest that there is room for improvement in the three areas of assessment, and support the case for the introduction of a standardised methodology or reference case by the BMGF. The findings are also instructive for all institutions that fund economic evaluations in LMICs and who have a desire to improve the ability of economic evaluations to inform resource allocation decisions.

  7. Evaluation of methodological aspects of digestibility measurements in ponies fed different haylage to concentrate ratios

    NARCIS (Netherlands)

    Schaafstra, F J W C; van Doorn, D A; Schonewille, J T; van Riet, M M J; Hendriks, W H

    2017-01-01

    Methodological aspects of digestibility measurements were studied in four Welsh pony geldings consuming haylage-based diets with increasing proportions of a pelleted concentrate according to a 4×4 Latin square design experiment. Ponies were fed four experimental, iso-energetic (net energy (NE)

  8. Evaluation of methodological aspects of digestibility measurements in ponies fed different haylage to concentrate ratios

    NARCIS (Netherlands)

    Schaafstra, F.J.W.C.; Doorn, van D.A.; Schonewille, J.T.; Riet, van M.M.J.; Visser, P.; Blok, M.C.; Hendriks, W.H.

    2017-01-01

    Methodological aspects of digestibility measurements were studied in four Welsh pony geldings consuming haylage-based diets with increasing proportions of a pelleted concentrate according to a 4×4 Latin square design experiment. Ponies were fed four experimental, iso-energetic (net energy (NE)

  9. Methodological Foundations for the Empirical Evaluation of Non-Experimental Methods in Field Settings

    Science.gov (United States)

    Wong, Vivian C.; Steiner, Peter M.

    2015-01-01

    Across the disciplines of economics, political science, public policy, and now, education, the randomized controlled trial (RCT) is the preferred methodology for establishing causal inference about program impacts. But randomized experiments are not always feasible because of ethical, political, and/or practical considerations, so non-experimental…

  10. The Interest of the Diversity of Perspectives and Methodologies in Evaluating the Science Laboratory Learning Environment

    Science.gov (United States)

    Membiela, Pedro; Vidal, Manuel

    2017-01-01

    The importance of researching the opinions of students and teachers has been pointed out concerning the improvement of teaching and learning in laboratory environments. In this regard, a study of the laboratory environment was carried out from a diversity of perspectives and methodologies. By means of a questionnaire it was learned that the…

  11. Features of the methodological approach to the evaluation of the led ...

    African Journals Online (AJOL)

    This article considers the issues related to research on the LED lighting efficiency in the industrial premises, the need to use the methodology to obtain meaningful scientific results. The LED lighting efficiency should be determined, primarily, based on the creation of conditions that are optimal for visual activity and safe from ...

  12. Methodological foundations of evaluation of effectiveness indicators of small-scale business activities

    Directory of Open Access Journals (Sweden)

    Ivanova T.

    2013-01-01

    Full Text Available The methodological approach to the measurement of financial indicators of small-scale enterprises has been developed. It enables to secure the comparability of financial condition indicators and the results of small-scale enterprise activities, and also to develop the methods of vertical integral estimate calculation at separate aspects of financial condition and the results of smallscale enterprise activities.

  13. Evaluation of methodological aspects of digestibility meaurements in ponies fed different grass hays

    NARCIS (Netherlands)

    Schaafstra, F.J.W.C.; Doorn, van D.A.; Schonewille, J.T.; Wartena, F.C.; Zoon, van M.; Blok, M.C.; Hendriks, W.H.

    2015-01-01

    Methodological aspects of digestibility measurements of feedstuffs for equines were studied in four Welsh pony geldings consuming four grass-hay diets in a 4 × 4 Latin square design. Diets contained either a low (L), medium (M), high (H), or very high (VH) ADF content (264, 314, 375, or 396 g·kg-1

  14. Evaluating municipal websites: A methodological comparison of three think-aloud variants

    NARCIS (Netherlands)

    van den Haak, M.J.; de Jong, M.D.T.; Schellens, P.J.

    2009-01-01

    Usability methods have received relatively little methodological attention within the field of E-Government. This paper aims to address this gap by reporting on a usability test of the municipal website of Deventer (the Netherlands), carried out by means of three variants of the think-aloud method

  15. A systematic review of the methodology of telemedicine evaluation in patients with postural and movement disorders

    NARCIS (Netherlands)

    Huis in 't Veld, M.H.A.; van Dijk, H; Hermens, Hermanus J.; Vollenbroek-Hutten, Miriam Marie Rosé

    2006-01-01

    We reviewed the methodology used in telemedicine research concerning patients with postural and movement disorders. Literature searches were performed using various computerized databases through to October 2005. Twenty-two studies met the criteria for review. Two broad models of telemedicine

  16. Methodology for the biosphere evaluation during the RRAA management. Application for the Mediterranean system

    International Nuclear Information System (INIS)

    Pinedo, P.; Simon, I.; Aguero, A.

    1998-01-01

    For several years CIEMAT has been developing for ENRESA knowledge and tools to support the modelling of the migration and accumulation of radionuclides within the biosphere once those radionuclides are released or reach one or more parts of the biosphere (atmosphere, water impacts arising from the resulting distribution of radionuclides in the biosphere. In 1996, a Methodology to analyse the biosphere in the context of high level waste repositories was proposed to ENRESA, where the issues mentioned above were considered and treated. The level of development of the different aspects proposed within the Methodology was quite heterogeneous and, while aspects of radionuclide transport modelling were already well developed in theoretical and practical terms, other aspects like the procedure for conceptual model development using the RES matrix and the description of biosphere systems representatives of the long term needed further developments. These own methodological developments have been developed in parallel with similar international developments within which there were and are an active participation, the BIOMOVS II international Project, finalized in 1996 and where it was developed the so called Reference Biosphere Methodology and, the International Atomic Energy Agency (IAEA) Programme on Biosphere Modelling and Assessment (BIOMASS), that is developed at present in collaboration with several national organizations, ENRESA and CIEMAT among them. The work described here takes account of these international developments. The overall purpose of this work is to apply the Methodology, to the last performance assessment (PA) exercise made by ENRESA, using form it the general and particular information about the assessment context, the source term, and the geo-biosphere interface data. (Author) 6 refs

  17. Theoretical and methodological basis for the formation and evaluation of the level of the economic system's strategic economic potential

    Directory of Open Access Journals (Sweden)

    Kljushin Vladislav Vladimirovich

    2014-12-01

    Full Text Available The current level of business activity of socio-economic systems of different scale and insufficient to increase their overall potential. To solve this problem, the first priority is the effective management of their strategic and economic potential. Managerial decision-making about the use of economic resources strategic socio-economic systems requires the development of a methodology to identify and evaluate strategic and economic potential.

  18. Formulation and Evaluation of Cookies Containing Germinated Pigeon Pea, Fermented Sorghum and Cocoyam Flour Blends using Mixture Response Surface Methodology

    OpenAIRE

    Laura C. Okpala; Eric C. Okoli

    2011-01-01

    Cookies were produced from blends of germinated pigeon pea, fermented sorghum and cocoyam flours. The study was carried out to evaluate the effects of varying the proportions of these components on the sensory and protein quality of the cookies. The sensory attributes studied were colour, taste, texture, crispiness and general acceptability while the protein quality indices were Biological Value (BV) and Net Protein Utilization (NPU). Mixture response surface methodology was used to model the...

  19. Implementation and evaluation of a pharmacist-led hypertension management service in primary care: outcomes and methodological challenges

    OpenAIRE

    Bajorek, Beata; Lemay, Kate S.; Magin, Parker; Roberts, Christopher; Krass, Ines; Armour, Carol L.

    2016-01-01

    Background: Suboptimal utilisation of pharmacotherapy, non-adherence to prescribed treatment, and a lack of monitoring all contribute to poor blood (BP) pressure control in patients with hypertension. Objective: The objective of this study was to evaluate the implementation of a pharmacist-led hypertension management service in terms of processes, outcomes, and methodological challenges. Method: A prospective, controlled study was undertaken within the Australian primary care setting. C...

  20. Evaluation of Student Care Process in Urban and Rural Health Care Centers and Health House in Tabriz Using Tracer Methodology

    Directory of Open Access Journals (Sweden)

    Neda Kabiri

    2015-08-01

    Full Text Available Background and Objectives : Tracer methodology is a novel evaluation method which its purpose is to provide an accurate assessment of systems and processes for the delivery of care, treatment, and services at a health care organization. This study aimed to assess student care process in Tabriz using Tracer methodology. Material and Methods : This cross-sectional study was conducted in autumn 1391. Population study consisted of all the students who were covered by Tabriz health care center and study sample included an urban health care center, a rural health care center, a health house, and two schools in urban and rural areas which were selected by simple sampling method. Also, all the complicated and problematic processes were chosen to be assessed. Data were collected by interviewing, observing, and surveying documents and were compared with current standards. Results : The results of this study declared the percentage of points that each target group gained from tracer evaluation in student care process was 77% in health house, 90% in rural health care center and 83% in urban health care center. Findings indicated that documentation was the main weak point. Conclusion : According to the results of this study, student care process is sufficient; despite the fact that there are some deficiencies in caring process, as it may be improved through appropriate strategies. Furthermore, tracer methodology seems to be a proper method to evaluate various levels of health care system. ​

  1. Climate change and flood hazard: Evaluation of the SCHADEX methodology in a non-stationary context

    International Nuclear Information System (INIS)

    Brigode, Pierre

    2013-01-01

    Since 2006, Electricite de France (EDF) applies a new hydro-climatological approach of extreme rainfall and flood predetermination - the SCHADEX method - for the design of dam spillways. In a context of potential increase of extreme event intensity and frequency due to climate change, the use of the SCHADEX method in non-stationary conditions is a main interest topic for EDF hydrologists. Thus, the scientific goal of this Ph.D. thesis work has been to evaluate the ability of the SCHADEX method to take into account future climate simulations for the estimation of future extreme floods. The recognized inabilities of climate models and down-scaling methods to simulate (extreme) rainfall distribution at the catchment-scale have been avoided, by developing and testing new methodological approaches. Moreover, the decomposition of the flood-producing factors proposed by the SCHADEX method has been used for considering different simulated climatic evolutions and for quantifying the relative impact of these factors on the extreme flood estimation. First, the SCHADEX method has been applied in present time over different climatic contexts (France, Austria, Canada and Norway), thanks to several colorations with academic and industrial partners. A sensitivity analysis allowed to quantify the extreme flood estimation sensitivity to rainfall hazard, catchment saturation hazard and rainfall-runoff transformation, independently. The results showed a large sensitivity of SCHADEX flood estimations to the rainfall hazard and to the rainfall-runoff transformation. Using the sensitivity analysis results, tests have been done in order to estimate the future evolution of 'key' variables previously identified. New climate model outputs (done within the CMIP5 project) have been analyzed and used for determining future frequency of rainfall events and future catchment saturation conditions. Considering these simulated evolutions within the SCHADEX method lead to a significant decrease of

  2. EMS and process of identification and evaluation of environmental aspects: a proposal methodology

    International Nuclear Information System (INIS)

    Perotto, E.

    2006-01-01

    The Environmental Management System (EMS) is an instrument to manage the interaction between the organization and the environment. The scope od EMS is to reduce the environmental impact and to achieve improvements in overall performances. In particular, the focus point of EMS implementation is the method for identifying and assessing significant environmental aspects. The results of the literature and regulation reviews (Perotto 2006) have shown that rigourous repeatable and transparent methodologies do not exist. This paper presents a proposal method for identifying and assessing significant environmental aspects, that has all three of these important characteristics. In particular, the proposal methodology for assessing aspects is based on some criteria that are combined in a specific algorithm. It is important to specify that to make a correct application of the method a preliminary rigorous approach to investigating the environment and the activities of organizations is necessary [it

  3. A validated methodology for evaluating burnup credit in spent fuel casks

    International Nuclear Information System (INIS)

    Brady, M.C.; Sanders, T.L.

    1991-01-01

    The concept of allowing reactivity credit for the transmuted state of spent fuel offers both economic and risk incentives. This paper presents a general overview of the technical work being performed in support of the U.S. Department of Energy (DOE) program to resolve issues related to the implementation of burnup credit. An analysis methodology is presented along with information representing the validation of the method against available experimental data. The experimental data that are applicable to burnup credit include chemical assay data for the validation of the isotopic prediction models, fresh fuel critical experiments for the validation of criticality calculations for various cask geometries, and reactor restart critical data to validate criticality calculations with spent fuel. The methodology has been specifically developed to be simple and generally applicable, therefore giving rise to uncertainties or sensitivities which are identified and quantified in terms of a percent bias in k eff . Implementation issues affecting licensing requirements and operational procedures are discussed briefly. (Author)

  4. A validated methodology for evaluating burnup credit in spent fuel casks

    International Nuclear Information System (INIS)

    Brady, M.C.; Sanders, T.L.

    1991-01-01

    The concept of allowing reactivity credit for the transmuted state of spent fuel offers both economic and risk incentives. This paper presents a general overview of the technical work being performed in support of the US Department of Energy (DOE) program to resolve issues related to the implementation of burnup credit. An analysis methodology is presented along with information representing the validation of the method against available experimental data. The experimental data that are applicable to burnup credit include chemical assay data for the validation of the isotopic prediction models, fresh fuel critical experiments for the validation of criticality calculations for various casks geometries, and reactor restart critical data to validate criticality calculations with spent fuel. The methodology has been specifically developed to be simple and generally applicable, therefore giving rise to uncertainties or sensitivities which are identified and quantified in terms of a percent bias in k eff . Implementation issues affecting licensing requirements and operational procedures are discussed briefly

  5. A spatially-evaluated methodology for assessing risk to a population from contaminated land

    International Nuclear Information System (INIS)

    Gay, J. Rebecca; Korre, Anna

    2006-01-01

    A methodology is proposed which combines quantitative probabilistic human health risk assessment and spatial statistical methods (geostatistics) to produce an assessment of risks to human health from exposure to contaminated land, in a manner which preserves the spatial distribution of risks and provides a measure of uncertainty in the assessment. Maps of soil contaminant levels, which incorporate uncertainty, are produced from sparse sample data using sequential indicator simulation. A real, age-stratified population is mapped across the contaminated area, and intake of soil contaminants by individuals is calculated probabilistically using an adaptation of the Contaminated Land Exposure Assessment (CLEA) model. An abundance of information is contained in results which can be interrogated at the population and individual level, and mapped to provide a powerful visual tool for risk managers, enabling efficient targeting of risk reduction measures to different locations. - A methodology for calculating and mapping risks to a population from intake of soil contaminants

  6. Evaluation of electro-oxidation of biologically treated landfill leachate using response surface methodology

    International Nuclear Information System (INIS)

    Zhang Hui; Ran Xiaoni; Wu Xiaogang; Zhang Daobin

    2011-01-01

    Box-Behnken statistical experiment design and response surface methodology were used to investigate electrochemical oxidation of mature landfill leachate pretreated by sequencing batch reactor (SBR). Titanium coated with ruthenium dioxide (RuO 2 ) and iridium dioxide (IrO 2 ) was used as the anode in this study. The variables included current density, inter-electrode gap and reaction time. Response factors were ammonia nitrogen removal efficiency and COD removal efficiency. The response surface methodology models were derived based on the results. The predicted values calculated with the model equations were very close to the experimental values and the models were highly significant. The organic components before and after electrochemical oxidation were determined by GC-MS.

  7. A pattern recognition methodology for evaluation of load profiles and typical days of large electricity customers

    International Nuclear Information System (INIS)

    Tsekouras, G.J.; Kotoulas, P.B.; Tsirekis, C.D.; Dialynas, E.N.; Hatziargyriou, N.D.

    2008-01-01

    This paper describes a pattern recognition methodology for the classification of the daily chronological load curves of each large electricity customer, in order to estimate his typical days and his respective representative daily load profiles. It is based on pattern recognition methods, such as k-means, self-organized maps (SOM), fuzzy k-means and hierarchical clustering, which are theoretically described and properly adapted. The parameters of each clustering method are properly selected by an optimization process, which is separately applied for each one of six adequacy measures. The results can be used for the short-term and mid-term load forecasting of each consumer, for the choice of the proper tariffs and the feasibility studies of demand side management programs. This methodology is analytically applied for one medium voltage industrial customer and synoptically for a set of medium voltage customers of the Greek power system. The results of the clustering methods are presented and discussed. (author)

  8. INPRO Methodology to evaluate the Mexico nuclear energy system; Metodologia INPRO para evaluar el sistema de energia nuclear de Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Cruz S, R. R.; Martin del C, C., E-mail: crzslns.ricardoruben@gmail.com [UNAM, Facultad de Ingenieria, Ciudad Universitaria, 04510 Ciudad de Mexico (Mexico)

    2016-09-15

    The International Atomic Energy Agency has developed the so-called International Project on Fuel Cycles and Innovative Nuclear Reactors (INPRO), in order to make nuclear energy available to meet the energy needs of the 21 century, in a sustainable way. One of the tasks of the project is the evaluation of the nuclear systems, to check whether they meet the objectives of the project and whether they are sustainable. This paper explains the rationale and general characteristics of the project in the evaluation of nuclear energy systems based on the concept of sustainable development. It describes the methodology developed to carry out this evaluation, divided into seven areas, such as economic, environmental, security, etc., which together make up the sustainable development of energy through nuclear systems. The economic area is analyzed and the evaluation criteria and parameters established by INPRO are discussed, in order to evaluate the Mexican nuclear energy system using Nest (software developed within the same project) as a tool to support the economic evaluation of nuclear systems. Based on the energy strategy proposed by the Energy Secretary of the Mexican Government which seeks to reduce the greenhouse gas emissions from the national electricity generation park, two types of reactor of currently available technology (A BWR and AP1000), were compared and these in turn with other alternative energy generation technologies, such as combined cycle, geothermal and wind plants. Also, the results of the application of the INPRO methodology are presented. Finally, the recommendations on actions that could lead the Mexican nuclear energy system towards sustainable development and conclusions on the application of the methodology to the Mexican case are mentioned. (Author)

  9. Economic evaluation of HIV pre-exposure prophylaxis strategies: protocol for a methodological systematic review and quantitative synthesis.

    Science.gov (United States)

    Thavorn, Kednapa; Kugathasan, Howsikan; Tan, Darrell H S; Moqueet, Nasheed; Baral, Stefan D; Skidmore, Becky; MacFadden, Derek; Simkin, Anna; Mishra, Sharmistha

    2018-03-15

    Pre-exposure prophylaxis (PrEP) with antiretrovirals is an efficacious and effective intervention to decrease the risk of HIV (human immunodeficiency virus) acquisition. Yet drug and delivery costs prohibit access in many jurisdictions. In the absence of guidelines for the synthesis of economic evaluations, we developed a protocol for a systematic review of economic evaluation studies for PrEP by drawing on best practices in systematic reviews and the conduct and reporting of economic evaluations. We aim to estimate the incremental cost per health outcome of PrEP compared with placebo, no PrEP, or other HIV prevention strategies; assess the methodological variability in, and quality of, economic evaluations of PrEP; estimate the incremental cost per health outcome of different PrEP implementation strategies; and quantify the potential sources of heterogeneity in outcomes. We will systematically search electronic databases (MEDLINE, Embase) and the gray literature. We will include economic evaluation studies that assess both costs and health outcomes of PrEP in HIV-uninfected individuals, without restricting language or year of publication. Two reviewers will independently screen studies using predefined inclusion criteria, extract data, and assess methodological quality using the Philips checklist, Second Panel on the Cost-effectiveness of Health and Medicines, and the International Society for Pharmacoeconomics and Outcomes Research recommendations. Outcomes of interest include incremental costs and outcomes in natural units or utilities, cost-effectiveness ratios, and net monetary benefit. We will perform descriptive and quantitative syntheses using sensitivity analyses of outcomes by population subgroups, HIV epidemic settings, study designs, baseline intervention contexts, key parameter inputs and assumptions, type of outcomes, economic perspectives, and willingness to pay values. Findings will guide future economic evaluation of PrEP strategies in terms of

  10. #eVALUate: Monetizing Service Acquisition Trade-offs Using the QUALITY-INFUSED Price Methodology

    Science.gov (United States)

    2016-04-01

    they determine their source selection methodology along the best-value spectrum, ranging from lowest price technically acceptable (LPTA) to full...sidering factors determined to be germane to service value to the agency (Finkenstadt, 2015). Once an offeror’s prices are determined to be fair and... determine whether the quality rating system would affect the quality trade-off. In this case, the highest priced yet highest rated offeror was selected

  11. Cluster Randomised Trials in Cochrane Reviews: Evaluation of Methodological and Reporting Practice.

    Directory of Open Access Journals (Sweden)

    Marty Richardson

    Full Text Available Systematic reviews can include cluster-randomised controlled trials (C-RCTs, which require different analysis compared with standard individual-randomised controlled trials. However, it is not known whether review authors follow the methodological and reporting guidance when including these trials. The aim of this study was to assess the methodological and reporting practice of Cochrane reviews that included C-RCTs against criteria developed from existing guidance.Criteria were developed, based on methodological literature and personal experience supervising review production and quality. Criteria were grouped into four themes: identifying, reporting, assessing risk of bias, and analysing C-RCTs. The Cochrane Database of Systematic Reviews was searched (2nd December 2013, and the 50 most recent reviews that included C-RCTs were retrieved. Each review was then assessed using the criteria.The 50 reviews we identified were published by 26 Cochrane Review Groups between June 2013 and November 2013. For identifying C-RCTs, only 56% identified that C-RCTs were eligible for inclusion in the review in the eligibility criteria. For reporting C-RCTs, only eight (24% of the 33 reviews reported the method of cluster adjustment for their included C-RCTs. For assessing risk of bias, only one review assessed all five C-RCT-specific risk-of-bias criteria. For analysing C-RCTs, of the 27 reviews that presented unadjusted data, only nine (33% provided a warning that confidence intervals may be artificially narrow. Of the 34 reviews that reported data from unadjusted C-RCTs, only 13 (38% excluded the unadjusted results from the meta-analyses.The methodological and reporting practices in Cochrane reviews incorporating C-RCTs could be greatly improved, particularly with regard to analyses. Criteria developed as part of the current study could be used by review authors or editors to identify errors and improve the quality of published systematic reviews incorporating

  12. Methodological procedures and analytical instruments to evaluate an indicators integrated archive for urban management

    International Nuclear Information System (INIS)

    Del Ciello, R.; Napoleoni, S.

    1998-01-01

    This guide provides the results of a research developed at ENEA (National Agency for new Technology, Energy and the Environment) Casaccia center (Rome, Italy) aimed to define methodological procedures and analytical instruments needed to carry out an indicators integrated archive for urban management. The guide also defines the scheme of a negotiation process aimed to reach and exchange data and information among governmental and local administrations, non-governmental organizations and scientific bodies [it

  13. Evaluation of the OSCAR-4/MCNP calculation methodology for radioisotope production in the SAFARI-1 reactor

    International Nuclear Information System (INIS)

    Karriem, Z.; Zamonsky, O.M.

    2014-01-01

    The South African Nuclear Energy Corporation SOC Ltd (Necsa) is a state owned nuclear facility which owns and operates SAFARI-1, a 20 MW material testing reactor. SAFARI-1 is a multi-purpose reactor and is used for the production of radioisotopes through in-core sample irradiation. The Radiation and Reactor Theory (RRT) Section of Necsa supports SAFARI-1 operations with nuclear engineering analyses which include core-reload design, core-follow and radiation transport analyses. The primary computer codes that are used for the analyses are the OSCAR-4 nodal diffusion core simulator and the Monte Carlo transport code MCNP. RRT has developed a calculation methodology based on OSCAR-4 and MCNP to simulate the diverse in-core irradiation conditions in SAFARI-1, for the purpose of radioisotope production. In this paper we present the OSCAR-4/MCNP calculation methodology and the software tools that were developed for rapid and reliable construction of MCNP analysis models. The paper will present the application and accuracy of the methodology for the production of yttrium-90 ( 90 Y) and will include comparisons between calculation results and experimental measurements. The paper will also present sensitivity analyses that were performed to determine the effects of control rod bank position, representation of core depletion state and sample loading configuration, on the calculated 90 Y sample activity. (author)

  14. Evaluation and optimization of hepatocyte culture media factors by design of experiments (DoE) methodology.

    Science.gov (United States)

    Dong, Jia; Mandenius, Carl-Fredrik; Lübberstedt, Marc; Urbaniak, Thomas; Nüssler, Andreas K N; Knobeloch, Daniel; Gerlach, Jörg C; Zeilinger, Katrin

    2008-07-01

    Optimization of cell culture media based on statistical experimental design methodology is a widely used approach for improving cultivation conditions. We applied this methodology to refine the composition of an established culture medium for growth of a human hepatoma cell line, C3A. A selection of growth factors and nutrient supplements were systematically screened according to standard design of experiments (DoE) procedures. The results of the screening indicated that the medium additives hepatocyte growth factor, oncostatin M, and fibroblast growth factor 4 significantly influenced the metabolic activities of the C3A cell line. Surface response methodology revealed that the optimum levels for these factors were 30 ng/ml for hepatocyte growth factor and 35 ng/ml for oncostatin M. Additional experiments on primary human hepatocyte cultures showed high variance in metabolic activities between cells from different individuals, making determination of optimal levels of factors more difficult. Still, it was possible to conclude that hepatocyte growth factor, epidermal growth factor, and oncostatin M had decisive effects on the metabolic functions of primary human hepatocytes.

  15. APPLYING LCC METHODOLOGY FOR THE EVALUATION OF THE EFFECTIVENESS OF AN INVESTMENT OF PROJECTS OF THE SEWAGE TREATMENT PLANT

    Directory of Open Access Journals (Sweden)

    Anatoli Hurynovich

    2016-06-01

    Full Text Available The article is referring to the current problems of the evaluation of the effectiveness of an investment of new plans and of the modernization of existing sewage treatment plants including aspects of the optimization of costs of the sewage treatment. He shows the modernization of the sewage treatment plant the Evaluation of the life cycle as the adequate tool assisting choice of the best variant or the level. He is presenting characteristics of LCС methodology and examples of using to the technology assessment the sewage treatment.

  16. Mapping For Literature Conceptual And Theoretical Framework And Methodology Case Of Hot Deep Mining Ventilation Engineering Evaluation And Design

    Directory of Open Access Journals (Sweden)

    Peter M. Lukonde

    2017-09-01

    Full Text Available The paper reports the layout of a mapping process for literature theoretical and conceptual framework and methodology for mining ventilation engineering evaluation design and methodology for a hot deep mine. The purpose of mine ventilation is to provide suitable environmental conditions in working places that promote comfort and efficiency as well as the safety and health of underground personnel. The objectives addressed in this paper include a evaluation of a current mine ventilation system for a hot deep-level mine taking into account the existing ventilation system infrastructure for building of a mine ventilation baseline parametric database for subsequent end of life mine ventilation design and b design of the extension end of mine life ventilation system taking into account increased production high geothermic gradient and subsequent increase in depth of mining. The methodology used in evaluating an existing underground mine ventilation system and designing the extension end of mine life ventilation system employed three stages i Literature mapping to identify authors titles and technical papers at global regional and nationaldistrict scales relevant to the research ii Conceptual and theoretical framework mapping to extract a kernel or core of concepts hypotheses and theories from the literature map to drive the formation of methods of implementation and iii Methodology and implementation mapping to direct and control the processes of data collection analysis and interpretation. A sample case study of a deep-level underground mine has been used in this paper to provide examples of data collection data analysis and interpretation key findings and results discussion and what is new conclusions and recommendations when the proposed mapping process is employed.

  17. An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution.

    Science.gov (United States)

    Zhou, Xiaoying; Schoenung, Julie M

    2007-04-01

    Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.

  18. Environmentally-acceptable fossil energy site evaluation and selection: methodology and user's guide. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Northrop, G.M.

    1980-02-01

    This report is designed to facilitate assessments of environmental and socioeconomic impacts of fossil energy conversion facilities which might be implemented at potential sites. The discussion of methodology and the User's Guide contained herein are presented in a format that assumes the reader is not an energy technologist. Indeed, this methodology is meant for application by almost anyone with an interest in a potential fossil energy development - planners, citizen groups, government officials, and members of industry. It may also be of instructional value. The methodology is called: Site Evaluation for Energy Conversion Systems (SELECS) and is organized in three levels of increasing sophistication. Only the least complicated version - the Level 1 SELECS - is presented in this document. As stated above, it has been expressly designed to enable just about anyone to participate in evaluating the potential impacts of a proposed energy conversion facility. To accomplish this objective, the Level 1 calculations have been restricted to ones which can be performed by hand in about one working day. Data collection and report preparation may bring the total effort required for a first or one-time application to two to three weeks. If repeated applications are made in the same general region, the assembling of data for a different site or energy conversion technology will probably take much less time.

  19. Analytical tools and methodologies for evaluation of residual life of contacting pressure tubes in the early generation of Indian PHWRs

    International Nuclear Information System (INIS)

    Sinha, S.K.; Madhusoodanan, K.; Rupani, B.B.; Sinha, R.K.

    2002-01-01

    In-service life of a contacting Zircaloy-2 pressure tube (PT) in the earlier generation of Indian PHWRs, is limited mainly due to the accelerated hydrogen pick-up and nucleation and growth of hydride blister(s) at the cold spot(s) formed on outside surface of pressure tube as a result of its contact with the calandria tube (CT). The activities involving development of the analytical models for simulating the degradation mechanisms leading to PT-CT contact and the methodologies for the revaluation of their safe life under such condition form the important part of our extensive programme for the life management of contacting pressure tubes. Since after the PT-CT contact, rate of hydrogen pick-up and nucleation and growth of hydride blisters govern the safe residual life of the pressure tube, two analytical models (a) hydrogen pick-up model ('HYCON') and (b) model for the nucleation and growth of hydride blister at the contact spot ('BLIST -2D') have been developed in-house to estimate the extent of degradation caused by them. Along with them, a methodology for evaluation of safe residual life has also been formulated for evaluating the safe residual life of the contacting channels. This paper gives the brief description of the models and the methodologies relevant for the contacting Zircaloy-2 pressure tubes. (author)

  20. Do Italian Companies Manage Work-Related Stress Effectively? A Process Evaluation in Implementing the INAIL Methodology.

    Science.gov (United States)

    Di Tecco, Cristina; Ronchetti, Matteo; Ghelli, Monica; Russo, Simone; Persechino, Benedetta; Iavicoli, Sergio

    2015-01-01

    Studies on Intervention Process Evaluation are attracting growing attention in the literature on interventions linked to stress and the wellbeing of workers. There is evidence that some elements relating to the process and content of an intervention may have a decisive role in implementing it by facilitating or hindering the effectiveness of the results. This study aimed to provide a process evaluation on interventions to assess and manage risks related to work-related stress using a methodological path offered by INAIL. The final sample is composed of 124 companies participating to an interview on aspects relating to each phase of the INAIL methodological path put in place to implement the intervention. INAIL methodology has been defined as useful in the process of assessing and managing the risks related to work-related stress. Some factors related to the process (e.g., implementation of a preliminary phase, workers' involvement, and use of external consultants) showed a role in significant differences that emerged in the levels of risk, particularly in relation to findings from the preliminary assessment. Main findings provide information on the key aspects of process and content that are useful in implementing an intervention for assessing and managing risks related to work-related stress.

  1. Do Italian Companies Manage Work-Related Stress Effectively? A Process Evaluation in Implementing the INAIL Methodology

    Science.gov (United States)

    Di Tecco, Cristina; Ronchetti, Matteo; Ghelli, Monica; Russo, Simone; Persechino, Benedetta

    2015-01-01

    Studies on Intervention Process Evaluation are attracting growing attention in the literature on interventions linked to stress and the wellbeing of workers. There is evidence that some elements relating to the process and content of an intervention may have a decisive role in implementing it by facilitating or hindering the effectiveness of the results. This study aimed to provide a process evaluation on interventions to assess and manage risks related to work-related stress using a methodological path offered by INAIL. The final sample is composed of 124 companies participating to an interview on aspects relating to each phase of the INAIL methodological path put in place to implement the intervention. INAIL methodology has been defined as useful in the process of assessing and managing the risks related to work-related stress. Some factors related to the process (e.g., implementation of a preliminary phase, workers' involvement, and use of external consultants) showed a role in significant differences that emerged in the levels of risk, particularly in relation to findings from the preliminary assessment. Main findings provide information on the key aspects of process and content that are useful in implementing an intervention for assessing and managing risks related to work-related stress. PMID:26504788

  2. Evaluation of nuclear accidents consequences. Risk assessment methodologies, current status and applications

    International Nuclear Information System (INIS)

    Rodriguez, J.M.

    1996-01-01

    General description of the structure and process of the probabilistic methods of assessment the external consequences in the event of nuclear accidents is presented. attention is paid in the interface with Probabilistic Safety Analysis level 3 results (source term evaluation) Also are described key issues in accident consequence evaluation as: effects evaluated (early and late health effects and economic effects due to countermeasures), presentation of accident consequences results, computer codes. Briefly are presented some relevant areas for the applications of Accident Consequence Evaluation

  3. Methodological Investigation of the Curriculum Evaluation Theses Completed between the Years 2006-2015 in Turkey

    Science.gov (United States)

    Aslan, Mecit; Saglam, Mustafa

    2017-01-01

    The aim of this research is to examine postgraduate theses on curriculum evaluation completed between the years 2006-2015 in Turkey in terms of various aspects such as university, year, curriculum which is evaluated, curriculum evaluation model, research method, design, sample type, data collection methods, data analysis technique. In order to…

  4. Analysis of evaluation methodologies before and after technological changes: the case of the release of genetically modified organisms in Peru

    Directory of Open Access Journals (Sweden)

    Ramón Alberto Diez Matallana

    2013-10-01

    Full Text Available We evaluate the applicability of three methods of analysis of economic impact of technological change: the partial budget, the surplus model (Alston, Norton, and Pardey, 1998 run in Excel and software Modexc (Rivas, García, Seré Jarvis, Sannint, and Pachico, 1999. From the perspectives of ease management, the use of coefficients of easy access, the ability of managing information from primary and secondary sources, and the generation of economic efficiency indicators of short and long term. These methodologies are applied in a genetically improved o commercial white potato with resistance to insects and nematodes, in the district of Huasahuasi, Junin, Peru. Such methodologies are implemented in order to assess the profitability of investment in the Bt potato seed.

  5. Methodology for the economic evaluation of the application of the eolic energy and lot in the desalinization of sea water

    International Nuclear Information System (INIS)

    Cisneros Ramirez, Cesar A.

    2007-01-01

    The methodology that is presented allows the preliminary evaluation of the cost of the water of sea ($/m3) of a non connected system to the net, fed with renewable energy (eolic and photovoltaic lot) or with an electric generator. The production capacities they are limited to the 100 m 3 /d. The desalinisation plant can be fed by a single energy source or for but of one of them, what will constitute in this last case a system with feeding hybrid. In all the cases it was considered the necessity of energy storage to inclination of batteries to exception of when the feeding was by means of a generator electric. In the annex a chart is presented with the result of the application of the methodology

  6. A validated methodology for evaluating burn-up credit in spent fuel casks

    International Nuclear Information System (INIS)

    Brady, M.C.; Sanders, T.L.

    1992-01-01

    The concept of allowing reactivity credit for the transmuted state of spent fuel offers both economic and risk incentives. This paper presents a general overview of the technical work being performed in support of the US Department of Energy (USDOE) programme to resolve issues related to the implementation of burn-up credit in spent fuel cask design. An analysis methodology is presented along with information representing the validation of the method against available experimental data. The experimental data that are applicable to burn-up credit include chemical assay data for the validation of the isotopic prediction models, fresh fuel critical experiments for the validation of criticality calculations for various cask geometries, and reactor re-start critical data to validate criticality calculations with spent fuel. The methodology has been specifically developed to be simple and generally applicable, therefore giving rise to uncertainties or sensitivities which are identified and quantified in terms of a percent bias effective multiplication (k eff ). Implementation issues affecting licensing requirements and operational procedures are discussed briefly. (Author)

  7. A validated methodology for evaluating burnup credit in spent fuel casks

    International Nuclear Information System (INIS)

    Brady, M.C.; Sanders, T.L.

    1991-01-01

    The concept of allowing reactivity credit for the transmuted state of spent fuel offers both economic and risk incentives. This paper presents a general overview of the technical work being performed in support of the US Department of Energy (DOE) program to resolve issues related to the implementation of burnup credit. An analysis methodology is presented along with information representing the validation of the method against available experimental data. The experimental data that are applicable to burnup credit include chemical assay data for the validation of the isotopic prediction models, fresh fuel critical experiments for the validation of criticality calculations for various cask geometries, and reactor restart critical data to validate criticality calculations with spent fuel. The methodology has been specifically developed to be simple and generally applicable, therefore giving rise to uncertainties or sensitivities which are identified and quantified in terms of a percent bias in k eff . Implementation issues affecting licensing requirements and operational procedures are discussed briefly. 24 refs., 3 tabs

  8. Common methodologies in the evaluation of food allergy: pitfalls and prospects of food allergy prevalence studies.

    Science.gov (United States)

    Shu, Shang-an; Chang, Christopher; Leung, Patrick S C

    2014-06-01

    Global and regional studies on the prevalence of food allergies are plagued by inconsistent methodologies, variations in interpretation of results, and non-standardized study design. Hence, it becomes difficult to compare the prevalence of food allergies in different communities. This information would be useful in providing critical data that will enhance research to elucidate the nature of food allergies, and the role of gene-environment interactions in the sensitization of children and adults to foods. Testing methodologies range from questionnaires to objective in vitro and in vivo testing, to the gold standard, double-blind placebo-controlled food challenge (DBPCFC). Although considered the most accurate and reliable method in detecting the prevalence of food allergy, DBPCFC is not always practical in epidemiological studies of food allergy. On the other hand, multiple logistic regression studies have been done to determine predictability of the outcome of food challenges, and it appears that skin prick testing and in vitro-specific serum IgE are the best predictors. Future studies directed towards confirming the validity of these methods as well as developing algorithms to predict the food challenge outcomes are required, as they may someday become accessory tools to complement DBPCFC.

  9. Evaluating perceptual integration: uniting response-time- and accuracy-based methodologies.

    Science.gov (United States)

    Eidels, Ami; Townsend, James T; Hughes, Howard C; Perry, Lacey A

    2015-02-01

    This investigation brings together a response-time system identification methodology (e.g., Townsend & Wenger Psychonomic Bulletin & Review 11, 391-418, 2004a) and an accuracy methodology, intended to assess models of integration across stimulus dimensions (features, modalities, etc.) that were proposed by Shaw and colleagues (e.g., Mulligan & Shaw Perception & Psychophysics 28, 471-478, 1980). The goal was to theoretically examine these separate strategies and to apply them conjointly to the same set of participants. The empirical phases were carried out within an extension of an established experimental design called the double factorial paradigm (e.g., Townsend & Nozawa Journal of Mathematical Psychology 39, 321-359, 1995). That paradigm, based on response times, permits assessments of architecture (parallel vs. serial processing), stopping rule (exhaustive vs. minimum time), and workload capacity, all within the same blocks of trials. The paradigm introduced by Shaw and colleagues uses a statistic formally analogous to that of the double factorial paradigm, but based on accuracy rather than response times. We demonstrate that the accuracy measure cannot discriminate between parallel and serial processing. Nonetheless, the class of models supported by the accuracy data possesses a suitable interpretation within the same set of models supported by the response-time data. The supported model, consistent across individuals, is parallel and has limited capacity, with the participants employing the appropriate stopping rule for the experimental setting.

  10. The case for applying an early-lifecycle technology evaluation methodology to comparative evaluation of requirements engineering research

    Science.gov (United States)

    Feather, Martin S.

    2003-01-01

    The premise of this paper is taht there is a useful analogy between evaluation of proposed problem solutions and evaluation of requirements engineering research itself. Both of these application areas face the challenges of evaluation early in the lifecycle, of the need to consider a wide variety of factors, and of the need to combine inputs from multiple stakeholders in making thse evaluation and subsequent decisions.

  11. An evaluation of methodology for seismic qualification of equipment, cable trays, and ducts in ALWR plants by use of experience data

    International Nuclear Information System (INIS)

    Bandyopadhyay, K.K.; Kana, D.D.; Kennedy, R.P.; Schiff, A.J.

    1997-07-01

    Advanced Reactor Corporation (ARC) has developed a methodology for seismic qualification of equipment, cable trays and ducts in Advanced Light Water Reactor plants. A Panel (members of which acted as individuals) supported by the Office of Nuclear Regulatory Research of the Nuclear Regulatory Commission has evaluated this methodology. The review approach and observations are included in this report. In general, the Panel supports the ARC methodology with some exceptions and provides recommendations for further improvements. 26 refs., 10 figs., 1 tab

  12. An evaluation of methodology for seismic qualification of equipment, cable trays, and ducts in ALWR plants by use of experience data

    Energy Technology Data Exchange (ETDEWEB)

    Bandyopadhyay, K.K.; Kana, D.D.; Kennedy, R.P.; Schiff, A.J.

    1997-07-01

    Advanced Reactor Corporation (ARC) has developed a methodology for seismic qualification of equipment, cable trays and ducts in Advanced Light Water Reactor plants. A Panel (members of which acted as individuals) supported by the Office of Nuclear Regulatory Research of the Nuclear Regulatory Commission has evaluated this methodology. The review approach and observations are included in this report. In general, the Panel supports the ARC methodology with some exceptions and provides recommendations for further improvements. 26 refs., 10 figs., 1 tab.

  13. Municipal solid waste composition: Sampling methodology, statistical analyses, and case study evaluation

    International Nuclear Information System (INIS)

    Edjabou, Maklawe Essonanawe; Jensen, Morten Bang; Götze, Ramona; Pivnenko, Kostyantyn; Petersen, Claus; Scheutz, Charlotte; Astrup, Thomas Fruergaard

    2015-01-01

    Highlights: • Tiered approach to waste sorting ensures flexibility and facilitates comparison of solid waste composition data. • Food and miscellaneous wastes are the main fractions contributing to the residual household waste. • Separation of food packaging from food leftovers during sorting is not critical for determination of the solid waste composition. - Abstract: Sound waste management and optimisation of resource recovery require reliable data on solid waste generation and composition. In the absence of standardised and commonly accepted waste characterisation methodologies, various approaches have been reported in literature. This limits both comparability and applicability of the results. In this study, a waste sampling and sorting methodology for efficient and statistically robust characterisation of solid waste was introduced. The methodology was applied to residual waste collected from 1442 households distributed among 10 individual sub-areas in three Danish municipalities (both single and multi-family house areas). In total 17 tonnes of waste were sorted into 10–50 waste fractions, organised according to a three-level (tiered approach) facilitating comparison of the waste data between individual sub-areas with different fractionation (waste from one municipality was sorted at “Level III”, e.g. detailed, while the two others were sorted only at “Level I”). The results showed that residual household waste mainly contained food waste (42 ± 5%, mass per wet basis) and miscellaneous combustibles (18 ± 3%, mass per wet basis). The residual household waste generation rate in the study areas was 3–4 kg per person per week. Statistical analyses revealed that the waste composition was independent of variations in the waste generation rate. Both, waste composition and waste generation rates were statistically similar for each of the three municipalities. While the waste generation rates were similar for each of the two housing types (single

  14. Municipal solid waste composition: Sampling methodology, statistical analyses, and case study evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Edjabou, Maklawe Essonanawe, E-mail: vine@env.dtu.dk [Department of Environmental Engineering, Technical University of Denmark, 2800 Kgs. Lyngby (Denmark); Jensen, Morten Bang; Götze, Ramona; Pivnenko, Kostyantyn [Department of Environmental Engineering, Technical University of Denmark, 2800 Kgs. Lyngby (Denmark); Petersen, Claus [Econet AS, Omøgade 8, 2.sal, 2100 Copenhagen (Denmark); Scheutz, Charlotte; Astrup, Thomas Fruergaard [Department of Environmental Engineering, Technical University of Denmark, 2800 Kgs. Lyngby (Denmark)

    2015-02-15

    Highlights: • Tiered approach to waste sorting ensures flexibility and facilitates comparison of solid waste composition data. • Food and miscellaneous wastes are the main fractions contributing to the residual household waste. • Separation of food packaging from food leftovers during sorting is not critical for determination of the solid waste composition. - Abstract: Sound waste management and optimisation of resource recovery require reliable data on solid waste generation and composition. In the absence of standardised and commonly accepted waste characterisation methodologies, various approaches have been reported in literature. This limits both comparability and applicability of the results. In this study, a waste sampling and sorting methodology for efficient and statistically robust characterisation of solid waste was introduced. The methodology was applied to residual waste collected from 1442 households distributed among 10 individual sub-areas in three Danish municipalities (both single and multi-family house areas). In total 17 tonnes of waste were sorted into 10–50 waste fractions, organised according to a three-level (tiered approach) facilitating comparison of the waste data between individual sub-areas with different fractionation (waste from one municipality was sorted at “Level III”, e.g. detailed, while the two others were sorted only at “Level I”). The results showed that residual household waste mainly contained food waste (42 ± 5%, mass per wet basis) and miscellaneous combustibles (18 ± 3%, mass per wet basis). The residual household waste generation rate in the study areas was 3–4 kg per person per week. Statistical analyses revealed that the waste composition was independent of variations in the waste generation rate. Both, waste composition and waste generation rates were statistically similar for each of the three municipalities. While the waste generation rates were similar for each of the two housing types (single

  15. Evaluation of frother performance in coal flotation: A critical review of existing methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharya, S.; Dey, S. [Indian School for Mines, Dhanbad (India). Dept. for Fuel & Mineral Engineering

    2008-07-01

    Separation efficiency in flotation depends, to a considerable extent, on the efficiency of the frother used. A successful frother must achieve a delicate balance between froth stability and non-persistency. Ideally, the frother is not supposed to influence the state of the surface of the coal and minerals. In practice, however, interaction does occur between the frother, other reagents, and solid surfaces. Various commercially available frothers can differ slightly or significantly in their influence on the flotation results. Therefore, a plant operator is in a dilemma when it comes to selecting a frother to be used in his plant. This article attempts to critically review the different methodologies, which are available to compare the performance of two or more frothers in order to decide which would best serve the purpose of the plant operator.

  16. Evaluation of a Short Message Service diary methodology in a nonclinical, naturalistic setting.

    Science.gov (United States)

    Walsh, Erin I; Brinker, Jay K

    2012-11-01

    Particularly suited to repeated measures in naturalistic settings, Short Message Service (SMS) is garnering increasing attention as a viable method of data collection. The current study explored issues of practical importance for the development of this methodology, including factors impacting on attrition and compliance, and participant perception of SMS. Using a business-card-sized questionnaire key, 98 university students were sent prompt SMS messages nightly for a week. Completion and compliance were very high in all participants who responded to at least one prompt SMS; those who responded at least once (n=63) responded to 83 percent of all seven prompts, with 95 percent of responses containing appropriate alphanumeric answers to all questions. However, a time lag between recruitment and participation was associated with a failure to commence the diary study. Participants reported positive perceptions of SMS privacy and convenience.

  17. Evaluation of the acquirement of nano composites of polypropylene and a bentonite organophilized by different methodologies

    International Nuclear Information System (INIS)

    Paiva, Lucilene B. de; Morales, Ana R.; Branciforti, Marcia C.; Bretas, Rosario E.S.

    2009-01-01

    This work describes the organophilization of an argentinean sodium bentonite with a quaternary ammo nium salt, by two methodologies: cation exchange in aqueous dispersion and intercalation in semi-solid medium. The modified samples were used in the preparation of nano composites, with polypropylene as a matrix and polypropylene-graft-maleic anhydride as a coupling agent, through melt intercalation by using a twin-screw micro extruder. The organophilic bentonites were characterized by the swelling capacity test in water and in xylene and by X-ray diffraction, and the nano composites were characterized by X-ray diffraction and transmission electronic microscopy. The results showed that were obtained nano composites with structures partially intercalated and exfoliated. (author)

  18. Acoustic Emission Methodology to Evaluate the Fracture Toughness in Heat Treated AISI D2 Tool Steel

    Science.gov (United States)

    Mostafavi, Sajad; Fotouhi, Mohamad; Motasemi, Abed; Ahmadi, Mehdi; Sindi, Cevat Teymuri

    2012-10-01

    In this article, fracture toughness behavior of tool steel was investigated using Acoustic Emission (AE) monitoring. Fracture toughness ( K IC) values of a specific tool steel was determined by applying various approaches based on conventional AE parameters, such as Acoustic Emission Cumulative Count (AECC), Acoustic Emission Energy Rate (AEER), and the combination of mechanical characteristics and AE information called sentry function. The critical fracture toughness values during crack propagation were achieved by means of relationship between the integral of the sentry function and cumulative fracture toughness (KICUM). Specimens were selected from AISI D2 cold-work tool steel and were heat treated at four different tempering conditions (300, 450, 525, and 575 °C). The results achieved through AE approaches were then compared with a methodology proposed by compact specimen testing according to ASTM standard E399. It was concluded that AE information was an efficient method to investigate fracture characteristics.

  19. Technology overview: assessment of social values in thermal power plant siting, social impact methodology evaluation

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    A methodology was developed to facilitate the selection of favorable thermal power plant site and design alternatives from the community perspective. A two-stage, multicriteria decision technique was employed to combine technical assessments of effects of the proposed site/design alternatives with corresponding community values. In the first stage, submodels are used to develop indices of plant impact on each of ten decision criteria. These criteria include effects on aesthetics, water quality, cost of power, air quality, ecology, social quality, local economy, recreational opportunities, cultural resources, and human health and safety. In the second stage, each of the impact indices is weighted by corresponding community values and then summed to provide an overall index of plant acceptability

  20. Study of an integrated multi-criteria evaluation methodology on energy and environmental system based on MFM

    International Nuclear Information System (INIS)

    Liu, Jingquan; Yoshikawa, Hidekazu; Zhou, Yangping; Ouyang, Jun

    2005-01-01

    This paper presents a multi-criteria evaluation methodology based on Multilevel Flow Model (MFM), a graphical modeling language and embedding the perspective of sustainable development for energy and environmental system. A set of indicators reflecting resource utility efficiency, environmental effect, social and economic criteria according to the different concerns of stakeholder are defined. The graphical assessment process and outcome can provide help for general people to understand the evaluated object and its variables and to get better decision-making. Extension Evaluation Method is the first applied in the graphical assessment. The once-through option and reprocessing option of nuclear fuel cycle system will be examined by using the proposed approach. (author)

  1. Policy Implications Analysis: A Methodological Advancement for Policy Research and Evaluation.

    Science.gov (United States)

    Madey, Doren L.; Stenner, A. Jackson

    Policy Implications Analysis (PIA) is a tool designed to maximize the likelihood that an evaluation report will have an impact on decision-making. PIA was designed to help people planning and conducting evaluations tailor their information so that it has optimal potential for being used and acted upon. This paper describes the development and…

  2. Using Functional Analysis Methodology to Evaluate Effects of an Atypical Antipsychotic on Severe Problem Behavior

    Science.gov (United States)

    Danov, Stacy E.; Tervo, Raymond; Meyers, Stephanie; Symons, Frank J.

    2012-01-01

    The atypical antipsychotic medication aripiprazole was evaluated using a randomized AB multiple baseline, double-blind, placebo-controlled design for the treatment of severe problem behavior with 4 children with intellectual and developmental disabilities. Functional analysis (FA) was conducted concurrent with the medication evaluation to…

  3. Evaluation, Ethnography, and Auditing in Educational Research: Methodological and Conceptual Comparisons.

    Science.gov (United States)

    Fetterman, David M.

    The most important distinction between evaluation (in the psychometric tradition), ethnography, and auditing is that they are guided by three distinctively separate principles. The underlying principle guiding evaluation is assessment. Ethnography is guided by description. Auditing uses description and assessment to establish an opinion on…

  4. Evaluation methodology for comparing memory and communication of analytic processes in visual analytics

    Energy Technology Data Exchange (ETDEWEB)

    Ragan, Eric D [ORNL; Goodall, John R [ORNL

    2014-01-01

    Provenance tools can help capture and represent the history of analytic processes. In addition to supporting analytic performance, provenance tools can be used to support memory of the process and communication of the steps to others. Objective evaluation methods are needed to evaluate how well provenance tools support analyst s memory and communication of analytic processes. In this paper, we present several methods for the evaluation of process memory, and we discuss the advantages and limitations of each. We discuss methods for determining a baseline process for comparison, and we describe various methods that can be used to elicit process recall, step ordering, and time estimations. Additionally, we discuss methods for conducting quantitative and qualitative analyses of process memory. By organizing possible memory evaluation methods and providing a meta-analysis of the potential benefits and drawbacks of different approaches, this paper can inform study design and encourage objective evaluation of process memory and communication.

  5. Methodology for Evaluating Cost-effectiveness of Commercial Energy Code Changes

    Energy Technology Data Exchange (ETDEWEB)

    Hart, Philip R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-01-31

    This document lays out the U.S. Department of Energy’s (DOE’s) method for evaluating the cost-effectiveness of energy code proposals and editions. The evaluation is applied to provisions or editions of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 90.1 and the International Energy Conservation Code (IECC). The method follows standard life-cycle cost (LCC) economic analysis procedures. Cost-effectiveness evaluation requires three steps: 1) evaluating the energy and energy cost savings of code changes, 2) evaluating the incremental and replacement costs related to the changes, and 3) determining the cost-effectiveness of energy code changes based on those costs and savings over time.

  6. Hydrologic evaluation methodology for estimating water movement through the unsaturated zone at commercial low-level radioactive waste disposal sites

    International Nuclear Information System (INIS)

    Meyer, P.D.; Rockhold, M.L.; Nichols, W.E.; Gee, G.W.

    1996-01-01

    This report identifies key technical issues related to hydrologic assessment of water flow in the unsaturated zone at low-level radioactive waste (LLW) disposal facilities. In addition, a methodology for incorporating these issues in the performance assessment of proposed LLW disposal facilities is identified and evaluated. The issues discussed fall into four areas: estimating the water balance at a site (i.e., infiltration, runoff, water storage, evapotranspiration, and recharge); analyzing the hydrologic performance of engineered components of a facility; evaluating the application of models to the prediction of facility performance; and estimating the uncertainty in predicted facility performance. To illustrate the application of the methodology, two examples are presented. The first example is of a below ground vault located in a humid environment. The second example looks at a shallow land burial facility located in an arid environment. The examples utilize actual site-specific data and realistic facility designs. The two examples illustrate the issues unique to humid and arid sites as well as the issues common to all LLW sites. Strategies for addressing the analytical difficulties arising in any complex hydrologic evaluation of the unsaturated zone are demonstrated

  7. Hydrologic evaluation methodology for estimating water movement through the unsaturated zone at commercial low-level radioactive waste disposal sites

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, P.D.; Rockhold, M.L.; Nichols, W.E.; Gee, G.W. [Pacific Northwest Lab., Richland, WA (United States)

    1996-01-01

    This report identifies key technical issues related to hydrologic assessment of water flow in the unsaturated zone at low-level radioactive waste (LLW) disposal facilities. In addition, a methodology for incorporating these issues in the performance assessment of proposed LLW disposal facilities is identified and evaluated. The issues discussed fall into four areas: estimating the water balance at a site (i.e., infiltration, runoff, water storage, evapotranspiration, and recharge); analyzing the hydrologic performance of engineered components of a facility; evaluating the application of models to the prediction of facility performance; and estimating the uncertainty in predicted facility performance. To illustrate the application of the methodology, two examples are presented. The first example is of a below ground vault located in a humid environment. The second example looks at a shallow land burial facility located in an arid environment. The examples utilize actual site-specific data and realistic facility designs. The two examples illustrate the issues unique to humid and arid sites as well as the issues common to all LLW sites. Strategies for addressing the analytical difficulties arising in any complex hydrologic evaluation of the unsaturated zone are demonstrated.

  8. Evaluation of doses and risks from different decontamination and decommissioning strategies using the PRESTO-II methodology

    International Nuclear Information System (INIS)

    Fields, D.E.

    1986-01-01

    The PRESTO-II methodology may be applied to evaluate doses and health risks from a variety of decontamination and decommissioning activities. This methodology has been implemented in the form of a computer code that has been applied to several sites, and that has been extensively documented. Radionuclide inventories are specified as separate contamination sources either present on the ground surface, covered by non-radioactive soils but lying above the water table, suspended in the atmosphere, or dissolved in surface waters. Hydrologic transport mechanisms considered in the PRESTO-II methodology include chemical exchange, ponding and overflow, surface water transport, groundwater transport, and pumping contaminated groundwater from wells. Varied scenarios of water usage are treated. Atmospheric inputs are based on both resuspension factor and resuspension rate approaches, with inhalation and immersion doses based on a Gaussian plume transport calculation. Site activities that are considered include land clearing, farming, and residing on the site. Exposure and dose calculations are derived from the US Nuclear Regulatory Commission Reg. Guide 1.109 approach, while risk calculations use a life-table approach developed for the US Environmental Protection Agency (EPA). Internal dose conversion factors are taken from ICRP 26 and 30, while risk conversion factors are values suggested by EPA. 19 refs., 2 figs., 1 tab

  9. Evaluation of constraint methodologies applied to a shallow-flaw cruciform bend specimen tested under biaxial loading conditions

    International Nuclear Information System (INIS)

    Bass, B.R.; McAfee, W.J.; Williams, P.T.; Pennell, W.E.

    1998-01-01

    A technology to determine shallow-flaw fracture toughness of reactor pressure vessel (RPV) steels is being developed for application to the safety assessment of RPVs containing postulated shallow surface flaws. Matrices of cruciform beam tests were developed to investigate and quantify the effects of temperature, biaxial loading, and specimen size on fracture initiation toughness of two-dimensional (constant depth), shallow surface flaws. The cruciform beam specimens were developed at Oak Ridge National Laboratory (ORNL) to introduce a prototypic, far-field. out-of-plane biaxial stress component in the test section that approximates the nonlinear stresses resulting from pressurized-thermal-shock or pressure-temperature loading of an RPV. Tests were conducted under biaxial load ratios ranging from uniaxial to equibiaxial. These tests demonstrated that biaxial loading can have a pronounced effect on shallow-flaw fracture toughness in the lower transition temperature region for RPV materials. The cruciform fracture toughness data were used to evaluate fracture methodologies for predicting the observed effects of biaxial loading on shallow-flaw fracture toughness. Initial emphasis was placed on assessment of stress-based methodologies. namely, the J-Q formulation, the Dodds-Anderson toughness scaling model, and the Weibull approach. Applications of these methodologies based on the hydrostatic stress fracture criterion indicated an effect of loading-biaxiality on fracture toughness, the conventional maximum principal stress criterion indicated no effect

  10. A decision methodology for the evaluation of mixed low-level radioactive waste management options for DOE sites

    Energy Technology Data Exchange (ETDEWEB)

    Bassi, J. [Dept. of Energy, Washington, DC (United States); Abashian, M.S.; Chakraborti, S.; Devarakonda, M.; Djordjevic, S.M. [IT Corp., Albuquerque, NM (United States)

    1993-03-01

    Currently, many DOE sites are developing site-specific solutions to manage their mixed low-level wastes. These site-specific MLLW programs often result in duplication of efforts between the different sites, and consequently, inefficient use of DOE system resources. A nationally integrated program for MLLW eliminates unnecessary duplication of effort, but requires a comprehensive analysis of waste management options to ensure that all site issues are addressed. A methodology for comprehensive analysis of the complete DOE MLLW system is being developed by DOE-HQ to establish an integrated and standardized solution for managing MLLW. To be effective, the comprehensive systems analysis must consider all aspects of MLLW management from cradle-to-grave (i.e. from MLLW generation to disposal). The results of the analysis will include recommendations for alternative management options for the complete DOE MLLW system based on various components such as effectiveness, cost, health and safety risks, and the probability of regulatory acceptance for an option. Because of the diverse nature of these various components and the associated difficulties in comparing between them, a decision methodology is being developed that will integrate the above components into a single evaluation scheme for performing relative comparisons between different MLLW management options. The remainder of this paper provides an overview of the roles and responsibilities of the various participants of the DOE MLLW Program, and discusses in detail the components involved in the development of the decision methodology for a comprehensive systems analysis.

  11. Development and application of a statistical methodology to evaluate the predictive accuracy of building energy baseline models

    Energy Technology Data Exchange (ETDEWEB)

    Granderson, Jessica [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Energy Technologies Area Div.; Price, Phillip N. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States). Energy Technologies Area Div.

    2014-03-01

    This paper documents the development and application of a general statistical methodology to assess the accuracy of baseline energy models, focusing on its application to Measurement and Verification (M&V) of whole-­building energy savings. The methodology complements the principles addressed in resources such as ASHRAE Guideline 14 and the International Performance Measurement and Verification Protocol. It requires fitting a baseline model to data from a ``training period’’ and using the model to predict total electricity consumption during a subsequent ``prediction period.’’ We illustrate the methodology by evaluating five baseline models using data from 29 buildings. The training period and prediction period were varied, and model predictions of daily, weekly, and monthly energy consumption were compared to meter data to determine model accuracy. Several metrics were used to characterize the accuracy of the predictions, and in some cases the best-­performing model as judged by one metric was not the best performer when judged by another metric.

  12. Development of the evaluation methodology for the material relocation behavior in the core disruptive accident of sodium cooled fast reactors

    International Nuclear Information System (INIS)

    Tobita, Yoshiharu; Kamiyama, Kenji; Tagami, Hirotaka; Matsuba, Ken-ichi; Suzuki, Tohru; Isozaki, Mikio; Yamano, Hidemasa; Morita, Koji; Guo, Liancheng; Zhang, Bin

    2014-01-01

    The in-vessel retention (IVR) of core disruptive accident (CDA) is of prime importance in enhancing safety characteristics of sodium-cooled fast reactors (SFRs). In the CDA of SFRs, molten core material relocates to the lower plenum of reactor vessel and may impose significant thermal load on the structures, resulting in the melt through of the reactor vessel. In order to enable the assessment of this relocation process and prove that IVR of core material is the most probable consequence of the CDA in SFRs, a research program to develop the evaluation methodology for the material relocation behavior in the CDA of SFRs has been conducted. This program consists of three developmental studies, namely the development of the analysis method of molten material discharge from the core region, the development of evaluation methodology of molten material penetration into sodium pool, and the development of the simulation tool of debris bed behavior. The analysis method of molten material discharge was developed based on the computer code SIMMER-III since this code is designed to simulate the multi-phase, multi-component fluid dynamics with phase changes involved in the discharge process. Several experiments simulating the molten material discharge through duct using simulant materials were utilized as the basis of validation study of the physical models in this code. It was shown that SIMMER-III with improved physical models could simulate the molten material discharge behavior including the momentum exchange with duct wall and thermal interaction with coolant. In order to develop evaluation methodology of molten material penetration into sodium pool, a series of experiments simulating jet penetration behavior into sodium pool in SFR thermal condition were performed. These experiments revealed that the molten jet was fragmented in significantly shorter penetration length than the prediction by existing correlation for light water reactor conditions, due to the direct

  13. Perceptions and difficulties in the use of participative methodologies and formative evaluation in science of physical activity degree

    Directory of Open Access Journals (Sweden)

    Francisco Javier Castejón Oliva

    2011-12-01

    Full Text Available This article presents the process of adapting teaching skills within the framework of the European Higher Education Area, particularly with the introduction of Degree in Physical Activity and Sport Science from Universidad Autónoma of Madrid. The objective is to analyze the perceptions and difficulties of the teachers and students on participatory methodologies and formative evaluation systems. Data sources are from documentary analysis of the tutorials for the subjects, individual interviews with the teachers (n=4 and group interviews with the students (n=12. The results show inconsistencies between what is proposed and implemented by the teachers, and how students perceive.

  14. Application of Response Surface Methodology (RSM for Optimization of Operating Parameters and Performance Evaluation of Cooling Tower Cold Water Temperature

    Directory of Open Access Journals (Sweden)

    Ramkumar RAMAKRISHNAN

    2012-01-01

    Full Text Available The performance of a cooling tower was analyzed with various operating parameters tofind the minimum cold water temperature. In this study, optimization of operating parameters wasinvestigated. An experimental design was carried out based on central composite design (CCD withresponse surface methodology (RSM. This paper presents optimum operating parameters and theminimum cold water temperature using the RSM method. The RSM was used to evaluate the effectsof operating variables and their interaction towards the attainment of their optimum conditions.Based on the analysis, air flow, hot water temperature and packing height were high significanteffect on cold water temperature. The optimum operating parameters were predicted using the RSMmethod and confirmed through experiment.

  15. Earth Sciences Data and Information System (ESDIS) program planning and evaluation methodology development

    Science.gov (United States)

    Dickinson, William B.

    1995-01-01

    An Earth Sciences Data and Information System (ESDIS) Project Management Plan (PMP) is prepared. An ESDIS Project Systems Engineering Management Plan (SEMP) consistent with the developed PMP is also prepared. ESDIS and related EOS program requirements developments, management and analysis processes are evaluated. Opportunities to improve the effectiveness of these processes and program/project responsiveness to requirements are identified. Overall ESDIS cost estimation processes are evaluated, and recommendations to improve cost estimating and modeling techniques are developed. ESDIS schedules and scheduling tools are evaluated. Risk assessment, risk mitigation strategies and approaches, and use of risk information in management decision-making are addressed.

  16. Workshop tools and methodologies for evaluation of energy chains and for technology perspective

    Energy Technology Data Exchange (ETDEWEB)

    Appert, O. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Maillard, D. [Energy and Raw Materials, 75 - Paris (France); Pumphrey, D. [Energy Cooperation, US Dept. of Energy (United States); Sverdrup, G.; Valdez, B. [National Renewable Energy Laboratory, Golden, CO (United States); Schindler, J. [LB-Systemtechnik (LBST), GmbH, Ottobrunn (Germany); His, St.; Rozakis, St. [Centre International de Recherche sur Environnement Developpement (CIRED), 94 - Nogent sur Marne (France); Sagisaka, M. [LCA Research Centre (Japan); Bjornstad, D. [Oak Ridge National Laboratory, Oak Ridge, Tennessee (United States); Madre, J.L. [Institut National de Recherche sur les Transports et leur Securite, 94 - Arcueil (France); Hourcade, J.Ch. [Centre International de Recherche sur l' Environnement le Developpement (CIRED), 94 - Nogent sur Marne (France); Ricci, A.; Criqui, P.; Chateau, B.; Bunger, U.; Jeeninga, H. [EU/DG-R (Italy); Chan, A. [National Research Council (Canada); Gielen, D. [IEA-International Energy Associates Ltd., Fairfax, VA (United States); Tosato, G.C. [Energy Technology Systems Analysis Programme (ETSAP), 75 - Paris (France); Akai, M. [Agency of Industrial Science and technology (Japan); Ziesing, H.J. [Deutsches Institut fur Wirtschaftsforschung, DIW Berlin (Germany); Leban, R. [Conservatoire National des Arts et Metiers (CNAM), 75 - Paris (France)

    2005-07-01

    The aims of this workshop is to better characterize the future in integrating all the dynamic interaction between the economy, the environment and the society. It offers presentations on the Hydrogen chains evaluation, the micro-economic modelling for evaluation of bio-fuel options, life cycle assessment evolution and potentialities, the consumer valuation of energy technologies attributes, the perspectives for evaluation of changing behavior, the incentive systems and barriers to social acceptability, the internalization of external costs, the endogenous technical change in long-tem energy models, ETSAP/technology dynamics in partial equilibrium energy models, very long-term energy environment modelling, ultra long-term energy technology perspectives, the socio-economic toolbox of the EU hydrogen road-map, the combined approach using technology oriented optimization and evaluation of impacts of individual policy measures and the application of a suite of basic research portfolio management tools. (A.L.B.)

  17. Architecture for large-scale automatic web accessibility evaluation based on the UWEM methodology

    DEFF Research Database (Denmark)

    Ulltveit-Moe, Nils; Olsen, Morten Goodwin; Pillai, Anand B.

    2008-01-01

    The European Internet Accessibility project (EIAO) has developed an Observatory for performing large scale automatic web accessibility evaluations of public sector web sites in Europe. The architecture includes a distributed web crawler that crawls web sites for links until either a given budget...... of web pages have been identified or the web site has been crawled exhaustively. Subsequently, a uniform random subset of the crawled web pages is sampled and sent for accessibility evaluation and the evaluation results are stored in a Resource Description Format (RDF) database that is later loaded...... challenges that the project faced and the solutions developed towards building a system capable of regular large-scale accessibility evaluations with sufficient capacity and stability. It also outlines some possible future architectural improvements....

  18. Evaluation of Test Methodologies for Dissolution and Corrosion of Al-SNF

    International Nuclear Information System (INIS)

    Wiersma, B.J.; Mickalonis, J.I.; Louthan, M.R.

    1998-09-01

    The performance of aluminum-based spent nuclear fuel (Al-SNF) in the repository will differ from that of the commercial nuclear fuels and the high level waste glasses. The program consists of evaluating three test methods

  19. Feasibility study and methodology to create a quality-evaluated database of primary care data

    Directory of Open Access Journals (Sweden)

    Alison Bourke

    2004-11-01

    Conclusions In the group of practices studied, levels of recording were generally assessed to be of sufficient quality to enable a database of quality-evaluated, anonymised primary care records to be created.

  20. Development of loca calculation capability with relap5-3D in accordance with the evaluation model methodology

    International Nuclear Information System (INIS)

    Liang, T.K.S.; Huan-Jen, Hung; Chin-Jang, Chang; Lance, Wang

    2001-01-01

    In light water reactors, particularly the pressurized water reactor (PWR), the severity of a LOCA (loss of coolant accident) will limit how high the reactor power can operate. Although the best-estimate LOCA licensing methodology can provide the greatest margin on the PCT (peak cladding temperature) evaluation during LOCA, it generally takes more resources to develop. Instead, implementation of evaluation models required by the Appendix K of 10 CFR 50 upon an advanced thermal-hydraulic platform can also enlarge significant margin between the highest calculated PCT and the safety limit of 2200 F. The compliance of the current RELAP5-3D code with Appendix K of 10 CFR50 has been evaluated, and it was found that there are ten areas where code assessment and/or further modifications were required to satisfy the requirements set forth in the Appendix K of 10 CFR 50. The associated models for LOCA consequent phenomenon analysis should follow the major concern of regulation and be expected to give more conservative results than those by the best-estimate methodology. They were required to predict the decay power level, the blowdown hydraulics, the blowdown heat transfer, the flooding rate, and the flooding heat transfer. All of the ten areas included in above classified simulations have been further evaluated and the RELAP5-3D has been successfully modified to fulfill the associated requirements. In addition, to verify and assess the development of the Appendix K version of RELAP5-3D, nine separate-effect experiments were adopted. Through the assessments against separate-effect experiments, the success of the code modification in accordance with the Appendix K of 10 CFR 50 was demonstrated. We will apply another six sets of integral-effect experiments in the next step to assure the integral conservatism of the Appendix K version of RELAP5-3D on LOCA licensing evaluation. (authors)

  1. Participatory evaluation of community actions as a learning methodology for personal and community empowerment: case studies and empowerment processes

    Directory of Open Access Journals (Sweden)

    Xavier Úcar Martínez

    2014-06-01

    Full Text Available Introduction: Participatory evaluation (PE is a hybrid methodology that can be used simultaneously to investigate and act in groups and communities. It can generate new knowledge about reality, but italso allows changes in the participants and their sociocultural context. This research project, developed over three years, aims to find out whether PE processes are useful and appropriate to evaluate community actionsand to generate learning that contribute to the empowerment of people who develop them.Method: The methodological structure of the research process design Participatory Evaluation processes that are applied in three selected communities-cases, over one year. The steering groups in each caseevaluated four dimensions of Community Development Plans: context, evolution, performance and results, using different techniques and group dynamics. Throughout this process, participants identify the acquiredknowledge and this is linked to indicators of empowerment, using questionnaires, content analysis and semi-structured interviews.Results: The development PE process in the three analyzed cases confirmed that PE is a useful strategy to assess participatory community actions of a territory; to report them to the people of the community; andto make shared decisions, about initiatives in order to improve community actions. The obtained results also verify that, throughout PE, there has been learning in the participants.Conclusions: The involvement of community members in the evaluation makes it more useful, fairer and more valid, but also a fourth positive consequence of PE is empowerment. From the process and the resultsof these cases of Participatory Evaluation, we consider that community EP is social transformation.

  2. Evaluation of the quality of the environmental participation: A methodological proposal

    International Nuclear Information System (INIS)

    Zuluaga M, Clara; Carmona M, Sergio Ivan

    2004-01-01

    The advances in the way to sustainability are inseparable to the achievement in the citizenship construction, because the citizen condition is only realized in the proactive compromise with the territorial themes, the environmental management effectiveness requests high quality in their participative processes; therefore, pertinent tools are required to know and to appraise these processes. The goodness of these tools proceeds of their functionality in the knowledge of the participation quality purpose, that to environmental participative processes, is conceived in terms of legitimacy, representatively, democratization of the environmental knowledge, social cohesion, capacity of interlocution, and incidence in the decision making, with the coherent conceptual structure of these facets shapes the theoretical-methodological scaffolding that permits their joining in attributes, variables and indicators relatives to the characteristics of the participative planning processes, proper to account of the environmental participation quality. With the appraisal of the environmental participation quality in planning processes, supported in the integration of the constitutive attributes, is possible to obtain the index that facilitates their diagnostic and improvement

  3. Evaluation of methodology for quantifying radiopharmaceuticals in tertiary-treated sewage

    International Nuclear Information System (INIS)

    Krieger, H.; Frishkorn, G.; Martin, E.; Jacobs, B.

    1980-01-01

    The production and utilization of radioactive pharmaceuticals and radionuclides for medical diagnosis and therapy warrant consideration of their fate and their radiation hazard to the population after discharge. Some of these nuclides represent curies of activity from a single facility that are being released to the sewers over a years's time. Although their relatively short half-life and the large sewer dilution may reduce the activity in the waste by several orders of magnitude at the point of treatment, the unpredictable range of decontamination by normal sewage treatment practices means that some will remain in the final effluent. Even after tertiary treatment operations, necessary when sewage effluents are to be used as coolants for nuclear reactors, and the confirmation of the nuclides in these effluents becomes of major concern as possible radiation hazards. Methodology to identify and measure the activity of five radionuclides - 131 I, 85 Sr, 57 Co, 51 Cr, and 75 Se - was developed and tested. Chemical yields agreed with radiochemical yields, and the chemical yields were at least 70%. Since the normal activity levels of each of these nuclides will be low, the required precision and accuracy can best be satisfied by radiochemical analysis of large volumes. Analyses on the influents, sludges, and treated effluents will indicate the overall efficiency of the entire sewage treatment process, provide evidence of the fate of each nuclide discharged into the sewage stream, and indicate whether a potential radiation hazard exists

  4. Response surface methodology to evaluation the recovery of amylases by hollow fiber membrane

    Directory of Open Access Journals (Sweden)

    João Baptista Severo Júnior

    2007-07-01

    Full Text Available This work aimed to study the pH and the transmembrane pressure effects during the recovery of alpha and beta amylases enzymes from corn malt (Zea mays by hollow fiber membrane. The optimal condition was obtained for a statistical model, established by response surface methodology (RSM. The response surface analysis showed that the best operation condition for amylolitics enzymes recovery by hollow fiber membrane was 0.05 bar and pH 5.00, while the enzymes were purified about of 26 times.Este trabalho objetivou estudar o efeito do pH e da pressão trans-membrana durante a recuperação das enzimas alfa e beta amilases do malte de milho (Zea mays por membranas de fibras ocas, a obtenção das condições ótimas foi feita por um modelo estatístico, estabelecido pela metodologia de superfície de resposta (RSM. A análise da superfície de resposta mostrou que as melhores condições operacionais para a recuperação das enzimas amiloliticas por membranas de fibras ocas foi 0,05 bar e pH 5,00; onde as enzimas foram purificadas cerca de 26 vezes.

  5. Evaluation of methodologies for assessing the overall diet: dietary quality scores and dietary pattern analysis.

    Science.gov (United States)

    Ocké, Marga C

    2013-05-01

    This paper aims to describe different approaches for studying the overall diet with advantages and limitations. Studies of the overall diet have emerged because the relationship between dietary intake and health is very complex with all kinds of interactions. These cannot be captured well by studying single dietary components. Three main approaches to study the overall diet can be distinguished. The first method is researcher-defined scores or indices of diet quality. These are usually based on guidelines for a healthy diet or on diets known to be healthy. The second approach, using principal component or cluster analysis, is driven by the underlying dietary data. In principal component analysis, scales are derived based on the underlying relationships between food groups, whereas in cluster analysis, subgroups of the population are created with people that cluster together based on their dietary intake. A third approach includes methods that are driven by a combination of biological pathways and the underlying dietary data. Reduced rank regression defines linear combinations of food intakes that maximally explain nutrient intakes or intermediate markers of disease. Decision tree analysis identifies subgroups of a population whose members share dietary characteristics that influence (intermediate markers of) disease. It is concluded that all approaches have advantages and limitations and essentially answer different questions. The third approach is still more in an exploration phase, but seems to have great potential with complementary value. More insight into the utility of conducting studies on the overall diet can be gained if more attention is given to methodological issues.

  6. Psychometric evaluation of the Moral Distress Risk Scale: A methodological study.

    Science.gov (United States)

    Schaefer, Rafaela; Zoboli, Elma Lcp; Vieira, Margarida M

    2017-01-01

    Moral distress is a kind of suffering that nurses may experience when they act in ways that are considered inconsistent with moral values, leading to a perceived compromise of moral integrity. Consequences are mostly negative and include physical and psychological symptoms, in addition to organizational implications. To psychometrically test the Moral Distress Risk Scale. A methodological study was realized. Data were submitted to exploratory factorial analysis through the SPSS statistical program. Participants and research context: In total, 268 nurses from hospitals and primary healthcare settings participated in this research during the period of March to June of 2016. Ethical considerations: This research has ethics committee approval. The Moral Distress Risk Scale is composed of 7 factors and 30 items; it shows evidence of acceptable reliability and validity with a Cronbach's α = 0.913, a total variance explained of 59%, a Kaiser-Meyer-Olkin = 0.896, and a significant Bartlett <0.001. Concerns about moral distress should be beyond acute care settings, and a tool to help clarify critical points in other healthcare contexts may add value to moral distress speech. Psychometric results reveal that the Moral Distress Risk Scale can be applied in different healthcare contexts.

  7. Health related war dioxin in Vietnam today, methodological approach in evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Thom, Le Hong; Tran, Manh Hung; Phung, Tri Dung [Ministry of Health, Ha Noi (Viet Nam)

    2004-09-15

    The Chemical war, that lasted for more than 10 years (1961-1971) had ended 30 years ago, but its severe outcomes on exposed human health seem to be far from ending. By the newest calculations, there should be more than 80 million of herbicides, including no less than 500 kg of Dioxin - 2,3,7,8-TCDD have been sprayed over land of South Vietnam. Dioxin the most ecotoxic agent, that human knowns to now, and have been researched by many scientists over the world. The studies conducted in experimental animals and partly in human tissues, have demonstrated, that dioxin cause the toxicity for many biofunctions, especially for systems like: nervous, digestive, immunoresponses, reproductive health, skin disorders, and carcinogenicity. It seems to be, that Viet nam have become a ''biggest laboratory'' of dioxin testing and its effects studying over the world. Many research into human health have been done, but the opinions of health outcomes, related to dioxin exposure still cause the debates. A lot of studies conducted on nature and man in Viet nam also, unfortunately there is not yet the overview general, concerning the methodological as epidemiological criteria. This report sum up the health, especially the reproductive outcomes, based strictly on the epidemiological disciplines.

  8. A METHODOLOGY TO EVALUATE THE TRANSFORMATION OF TRADITIONAL BALINESE HOUSES AS A CONSEQUENCE OF TOURISM

    Directory of Open Access Journals (Sweden)

    I Dewa Gede Agung Diasana Putra

    2017-03-01

    Full Text Available Some traditional houses in Bali have been transformed for tourist facilities. As a cultural phenomenon, the transformation involves an interrelated complexity of aspects in the houses. There is a need for a holistic approach to contextualize the complexity of the impact of tourism on the transformation. Unfortunately, an instrument to identify the textures of the transformation, as a fundamental phase to explore the complexity, is not yet available. The objective of this study is to develop an inclusive methodology based on criteria as the fundamental stage in the multiple holistic method developed. Using visual documentations of 749 traditional houses from four villages, the findings show that the transformation has been considered in various ways, both as the additive sum of the specific changes, and as a hierarchy of cultural traditions and activities. It was a process generally found to begin at the front part of the houses, followed by the backyard and pavilions, and in the final phase at the family temple. This method was able to systematically assess the physical configuration of the transformed house.

  9. METHODOLOGICAL APPROACH TO ANALYSIS AND EVALUATION OF INFORMATION PROTECTION IN INFORMATION SYSTEMS BASED ON VULNERABILITY DANGER

    Directory of Open Access Journals (Sweden)

    Y. M. Krotiuk

    2008-01-01

    Full Text Available The paper considers a methodological approach to an analysis and estimation of information security in the information systems which is based on the analysis of vulnerabilities and an extent of their hazard. By vulnerability hazard it is meant a complexity of its operation as a part of an information system. The required and sufficient vulnerability operational conditions  have  been  determined in the paper. The paper proposes a generalized model for attack realization which is used as a basis for construction of an attack realization model for an operation of a particular vulnerability. A criterion for estimation of information protection in the information systems which is based on the estimation of vulnerability hazard is formulated in the paper. The proposed approach allows to obtain a quantitative estimation of the information system security on the basis of the proposed schemes on realization of typical attacks for the distinguished classes of vulnerabilities.The methodical approach is used for choosing variants to be applied for realization of protection mechanisms in the information systems as well as for estimation of information safety in the operating information systems.

  10. A methodology for automation and robotics evaluation applied to the space station telerobotic servicer

    Science.gov (United States)

    Smith, Jeffrey H.; Gyanfi, Max; Volkmer, Kent; Zimmerman, Wayne

    1988-01-01

    The efforts of a recent study aimed at identifying key issues and trade-offs associated with using a Flight Telerobotic Servicer (FTS) to aid in Space Station assembly-phase tasks is described. The use of automation and robotic (A and R) technologies for large space systems would involve a substitution of automation capabilities for human extravehicular or intravehicular activities (EVA, IVA). A methodology is presented that incorporates assessment of candidate assembly-phase tasks, telerobotic performance capabilities, development costs, and effect of operational constraints (space transportation system (STS), attached payload, and proximity operations). Changes in the region of cost-effectiveness are examined under a variety of systems design assumptions. A discussion of issues is presented with focus on three roles the FTS might serve: (1) as a research-oriented testbed to learn more about space usage of telerobotics; (2) as a research based testbed having an experimental demonstration orientation with limited assembly and servicing applications; or (3) as an operational system to augment EVA and to aid the construction of the Space Station and to reduce the programmatic (schedule) risk by increasing the flexibility of mission operations.

  11. Evaluation and selection of indicators for land degradation and desertification monitoring: methodological approach.

    Science.gov (United States)

    Kosmas, C; Kairis, Or; Karavitis, Ch; Ritsema, C; Salvati, L; Acikalin, S; Alcala, M; Alfama, P; Atlhopheng, J; Barrera, J; Belgacem, A; Solé-Benet, A; Brito, J; Chaker, M; Chanda, R; Coelho, C; Darkoh, M; Diamantis, I; Ermolaeva, O; Fassouli, V; Fei, W; Feng, J; Fernandez, F; Ferreira, A; Gokceoglu, C; Gonzalez, D; Gungor, H; Hessel, R; Juying, J; Khatteli, H; Khitrov, N; Kounalaki, A; Laouina, A; Lollino, P; Lopes, M; Magole, L; Medina, L; Mendoza, M; Morais, P; Mulale, K; Ocakoglu, F; Ouessar, M; Ovalle, C; Perez, C; Perkins, J; Pliakas, F; Polemio, M; Pozo, A; Prat, C; Qinke, Y; Ramos, A; Ramos, J; Riquelme, J; Romanenkov, V; Rui, L; Santaloia, F; Sebego, R; Sghaier, M; Silva, N; Sizemskaya, M; Soares, J; Sonmez, H; Taamallah, H; Tezcan, L; Torri, D; Ungaro, F; Valente, S; de Vente, J; Zagal, E; Zeiliguer, A; Zhonging, W; Ziogas, A

    2014-11-01

    An approach to derive relationships for defining land degradation and desertification risk and developing appropriate tools for assessing the effectiveness of the various land management practices using indicators is presented in the present paper. In order to investigate which indicators are most effective in assessing the level of desertification risk, a total of 70 candidate indicators was selected providing information for the biophysical environment, socio-economic conditions, and land management characteristics. The indicators were defined in 1,672 field sites located in 17 study areas in the Mediterranean region, Eastern Europe, Latin America, Africa, and Asia. Based on an existing geo-referenced database, classes were designated for each indicator and a sensitivity score to desertification was assigned to each class based on existing research. The obtained data were analyzed for the various processes of land degradation at farm level. The derived methodology was assessed using independent indicators, such as the measured soil erosion rate, and the organic matter content of the soil. Based on regression analyses, the collected indicator set can be reduced to a number of effective indicators ranging from 8 to 17 in the various processes of land degradation. Among the most important indicators identified as affecting land degradation and desertification risk were rain seasonality, slope gradient, plant cover, rate of land abandonment, land-use intensity, and the level of policy implementation.

  12. Study on uncertainty evaluation methodology related to hydrological parameter of regional groundwater flow analysis model

    International Nuclear Information System (INIS)

    Sakai, Ryutaro; Munakata, Masahiro; Ohoka, Masao; Kameya, Hiroshi

    2009-11-01

    In the safety assessment for a geological disposal of radioactive waste, it is important to develop a methodology for long-term estimation of regional groundwater flow from data acquisition to numerical analyses. In the uncertainties associated with estimation of regional groundwater flow, there are the one that concerns parameters and the one that concerns the hydrologeological evolution. The uncertainties of parameters include measurement errors and their heterogeneity. The authors discussed the uncertainties of hydraulic conductivity as a significant parameter for regional groundwater flow analysis. This study suggests that hydraulic conductivities of rock mass are controlled by rock characteristics such as fractures, porosity and test conditions such as hydraulic gradient, water quality, water temperature and that there exists variations more than ten times in hydraulic conductivity by difference due to test conditions such as hydraulic gradient or due to rock type variations such as rock fractures, porosity. In addition this study demonstrated that confining pressure change caused by uplift and subsidence and change of hydraulic gradient under the long-term evolution of hydrogeological environment could possibly produce variations more than ten times of magnitude in hydraulic conductivity. It was also shown that the effect of water quality change on hydraulic conductivity was not negligible and that the replacement of fresh water and saline water caused by sea level change could induce 0.6 times in current hydraulic conductivities in case of Horonobe site. (author)

  13. Methodological and Statistical Quality in Research Evaluating Nutritional Attitudes in Sports.

    Science.gov (United States)

    Kouvelioti, Rozalia; Vagenas, George

    2015-12-01

    The assessment of dietary attitudes and behaviors provides information of interest to sports nutritionists. Although there has been little analysis of the quality of research undertaken in this field, there is evidence of a number of flaws and methodological concerns in some of the studies in the available literature. This review undertook a systematic assessment of the attributes of research assessing the nutritional knowledge and attitudes of athletes and coaches. Sixty questionnaire-based studies were identified by a search of official databases using specific key terms with subsequent analysis by certain inclusion-exclusion criteria. These studies were then analyzed using 33 research quality criteria related to the methods, questionnaires, and statistics used. We found that many studies did not provide information on critical issues such as research hypotheses (92%), the gaining of ethics approval (50%) or informed consent (35%), or acknowledgment of limitations in the implementation of studies or interpretation of data (72%). Many of the samples were nonprobabilistic (85%) and rather small (42%). Many questionnaires were of unknown origin (30%), validity (72%), and reliability (70%) and resulted in low (≤ 60%) response rates (38%). Pilot testing was not undertaken in 67% of the studies. Few studies dealt with sample size (2%), power (3%), assumptions (7%), confidence intervals (3%), or effect sizes (3%). Improving some of these problems and deficits may enhance future research in this field.

  14. Development Of Methodologies Using PhabrOmeter For Fabric Drape Evaluation

    Science.gov (United States)

    Lin, Chengwei

    Evaluation of fabric drape is important for textile industry as it reveals the aesthetic and functionality of the cloth and apparel. Although many fabric drape measuring methods have been developed for several decades, they are falling behind the need for fast product development by the industry. To meet the requirement of industries, it is necessary to develop an effective and reliable method to evaluate fabric drape. The purpose of the present study is to determine if PhabrOmeter can be applied to fabric drape evaluation. PhabrOmeter is a fabric sensory performance evaluating instrument which is developed to provide fast and reliable quality testing results. This study was sought to determine the relationship between fabric drape and other fabric attributes. In addition, a series of conventional methods including AATCC standards, ASTM standards and ISO standards were used to characterize the fabric samples. All the data were compared and analyzed with linear correlation method. The results indicate that PhabrOmeter is reliable and effective instrument for fabric drape evaluation. Besides, some effects including fabric structure, testing directions were considered to examine their impact on fabric drape.

  15. Evaluation of the performance of diagnosis-related groups and similar casemix systems: methodological issues.

    Science.gov (United States)

    Palmer, G; Reid, B

    2001-05-01

    With the increasing recognition and application of casemix for managing and financing healthcare resources, the evaluation of alternative versions of systems such as diagnosis-related groups (DRGs) has been afforded high priority by governments and researchers in many countries. Outside the United States, an important issue has been the perceived need to produce local versions, and to establish whether or not these perform more effectively than the US-based classifications. A discussion of casemix evaluation criteria highlights the large number of measures that may be used, the rationale and assumptions underlying each measure, and the problems in interpreting the results. A review of recent evaluation studies from a number of countries indicates that considerable emphasis has been placed on the predictive validity criterion, as measured by the R2 statistic. However, the interpretation of the findings has been affected greatly by the methods used, especially the treatment and definition of outlier cases. Furthermore, the extent to which other evaluation criteria have been addressed has varied widely. In the absence of minimum evaluation standards, it is not possible to draw clear-cut conclusions about the superiority of one version of a casemix system over another, the need for a local adaptation, or the further development of an existing version. Without the evidence provided by properly designed studies, policy-makers and managers may place undue reliance on subjective judgments and the views of the most influential, but not necessarily best informed, healthcare interest groups.

  16. Implementation and evaluation of a pharmacist-led hypertension management service in primary care: outcomes and methodological challenges.

    Science.gov (United States)

    Bajorek, Beata; Lemay, Kate S; Magin, Parker; Roberts, Christopher; Krass, Ines; Armour, Carol L

    2016-01-01

    Suboptimal utilisation of pharmacotherapy, non-adherence to prescribed treatment, and a lack of monitoring all contribute to poor blood (BP) pressure control in patients with hypertension. The objective of this study was to evaluate the implementation of a pharmacist-led hypertension management service in terms of processes, outcomes, and methodological challenges. A prospective, controlled study was undertaken within the Australian primary care setting. Community pharmacists were recruited to one of three study groups: Group A (Control - usual care), Group B (Intervention), or Group C (Short Intervention). Pharmacists in Groups B and C delivered a service comprising screening and monitoring of BP, as well as addressing poor BP control through therapeutic adjustment and adherence strategies. Pharmacists in Group C delivered the shortened version of the service. Significant changes to key outcome measures were observed in Group C: reduction in systolic and diastolic BPs at the 3-month visit (P<0.01 and P<0.01, respectively), improvement in medication adherence scores (P=0.01), and a slight improvement in quality of life (EQ-5D-3L Index) scores (P=0.91). There were no significant changes in Group B (the full intervention), and no differences in comparison to Group A (usual care). Pharmacists fed-back that patient recruitment was a key barrier to service implementation, highlighting the methodological implications of screening. A collaborative, pharmacist-led hypertension management service can help monitor BP, improve medication adherence, and optimise therapy in a step-wise approach. However, blood pressure screening can effect behaviour change in patients, presenting methodological challenges in the evaluation of services in this context.

  17. Implementation and evaluation of a pharmacist-led hypertension management service in primary care: outcomes and methodological challenges

    Directory of Open Access Journals (Sweden)

    Bajorek B

    2016-06-01

    Full Text Available Background: Suboptimal utilisation of pharmacotherapy, non-adherence to prescribed treatment, and a lack of monitoring all contribute to poor blood (BP pressure control in patients with hypertension. Objective: The objective of this study was to evaluate the implementation of a pharmacist-led hypertension management service in terms of processes, outcomes, and methodological challenges. Method: A prospective, controlled study was undertaken within the Australian primary care setting. Community pharmacists were recruited to one of three study groups: Group A (Control – usual care, Group B (Intervention, or Group C (Short Intervention. Pharmacists in Groups B and C delivered a service comprising screening and monitoring of BP, as well as addressing poor BP control through therapeutic adjustment and adherence strategies. Pharmacists in Group C delivered the shortened version of the service. Results: Significant changes to key outcome measures were observed in Group C: reduction in systolic and diastolic BPs at the 3-month visit (P<0.01 and P<0.01, respectively, improvement in medication adherence scores (P=0.01, and a slight improvement in quality of life (EQ-5D-3L Index scores (P=0.91. There were no significant changes in Group B (the full intervention, and no differences in comparison to Group A (usual care. Pharmacists fed-back that patient recruitment was a key barrier to service implementation, highlighting the methodological implications of screening. Conclusion: A collaborative, pharmacist-led hypertension management service can help monitor BP, improve medication adherence, and optimise therapy in a step-wise approach. However, blood pressure screening can effect behaviour change in patients, presenting methodological challenges in the evaluation of services in this context.

  18. Evaluation methodology for advance heat exchanger concepts using analytical hierarchy process

    International Nuclear Information System (INIS)

    Sabharwall, Piyush; Kim, Eung Soo; Patterson, Mike

    2012-01-01

    This study describes how the major alternatives and criteria being developed for the heat exchangers for next generation nuclear reactors are evaluated using the analytical hierarchy process (AHP). This evaluation was conducted as an aid in developing and selecting heat exchangers for integrating power production and process heat applications with next generation nuclear reactors. The basic setup for selecting the most appropriate heat exchanger option was established with evaluation goals, alternatives, and criteria. The two potential candidates explored in this study were shell-and-tube (helical coiled) and printed circuit heat exchangers. Based on study results, the shell-and-tube (helical coiled) heat exchanger is recommended for a demonstration reactor in the near term, mainly because of its reliability.

  19. A methodology for the quantitative evaluation of NPP fault diagnostic systems' dynamic aspects

    International Nuclear Information System (INIS)

    Kim, J.H.; Seong, P.H.

    2000-01-01

    A fault diagnostic system (FDS) is an operator decision support system which is implemented both to increase NPP efficiency as well as to reduce human error and cognitive workload that may cause nuclear power plant (NPP) accidents. Evaluation is an indispensable activity in constructing a reliable FDS. We first define the dynamic aspects of fault diagnostic systems (FDSs) for evaluation in this work. The dynamic aspect is concerned with the way a FDS responds to input. Next, we present a hierarchical structure in the evaluation for the dynamic aspects of FDSs. Dynamic aspects include both what a FDS provides and how a FDS operates. We define the former as content and the latter as behavior. Content and behavior contain two elements and six elements in the lower hierarchies, respectively. Content is a criterion for evaluating the integrity of a FDS, the problem types which a FDS deals with, along with the level of information. Behavior contains robustness, understandability, timeliness, transparency, effectiveness, and communicativeness of FDSs. On the other hand, the static aspects are concerned with the hardware and the software of the system. For quantitative evaluation, the method used to gain and aggregate the priorities of the criteria in this work is the analytic hierarchy process (AHP). The criteria at the lowest level are quantified through simple numerical expressions and questionnaires developed in this work. these well describe the characteristics of the criteria and appropriately use subjective, empirical, and technical methods. Finally, in order to demonstrate the feasibility of our evaluation method, we have performed one case study for the fault diagnosis module of OASYS TM (On-Line Operator Aid SYStem for Nuclear Power Plant), which is an operator support system developed at the Korea Advanced Institute of Science and Technology (KAIST)

  20. Development of methodology for evaluation of 99mTc and 131I incorporated activities during lactation

    International Nuclear Information System (INIS)

    Santos, L.; Dantas, A.L.A.; Mesquita, S.A.; Oliveira, S.M.V.; Instituto de Radioprotecao e Dosimetria

    2012-01-01

    Internal contamination of babies may occur for milk ingestion or inhalation of mothers occupationally exposed to ionizing radiation with possible incorporation or mothers submitted to medical exposures during lactation. Radionuclide concentrations in the mother's milk may cause organ absorbed doses in the babies proportionally to the breast volumes. Milk analysis allow to determine activities ingested by the babies by determining the peak of mother's milk considering the decrease of the activity rate and the milk activities drunk at different time intervals. The work had the aim to develop simulators and methodology to evaluate 99m Tc and 131 I in lactation, in the following steps: to prepare standard solution of contaminated milk separately with 99m Tc and 131 I; to build four breast simulators (600 g and 800 g) and respective calibration for two geometries (breast and whole-body) in the Whole-Body Counter Unit in Instituto de Radioprotecao e Dosimetria. The results demonstrated the system efficiency to determine 99m Tc and 131 I activities in breasts during the lactation period. The methodology for positioning in the 'breast geometry' seemed to be more efficient than the 'whole-body geometry' for different breast volumes. The experiment allows achieving better evaluation of internal dosimetry of mothers and their young children. (author)