WorldWideScience

Sample records for crystalline organic semiconductors

  1. Directional charge separation in isolated organic semiconductor crystalline nanowires

    Science.gov (United States)

    Labastide, J. A.; Thompson, H. B.; Marques, S. R.; Colella, N. S.; Briseno, A. L.; Barnes, M. D.

    2016-02-01

    One of the fundamental design paradigms in organic photovoltaic device engineering is based on the idea that charge separation is an extrinsically driven process requiring an interface for exciton fission. This idea has driven an enormous materials science engineering effort focused on construction of domain sizes commensurate with a nominal exciton diffusion length of order 10 nm. Here, we show that polarized optical excitation of isolated pristine crystalline nanowires of a small molecule n-type organic semiconductor, 7,8,15,16-tetraazaterrylene, generates a significant population of charge-separated polaron pairs along the π-stacking direction. Charge separation was signalled by pronounced power-law photoluminescence decay polarized along the same axis. In the transverse direction, we observed exponential decay associated with excitons localized on individual monomers. We propose that this effect derives from an intrinsic directional charge-transfer interaction that can ultimately be programmed by molecular packing geometry.

  2. Molecular fingerprints in the electronic properties of crystalline organic semiconductors

    DEFF Research Database (Denmark)

    Ciuchi, S.; Hatch, R.C.; Höchst, H.

    2012-01-01

    bands can be achieved in organic semiconductors provided that one properly accounts for the coupling to molecular vibrational modes and the presence of disorder. Our findings rationalize the growing experimental evidence that even the best band structure theories based on a many-body treatment...

  3. Photogeneration and enhanced charge transport in aligned smectic liquid crystalline organic semiconductor

    Energy Technology Data Exchange (ETDEWEB)

    Paul, Sanjoy; Ellman, Brett, E-mail: bellman@kent.edu [Department of Physics, Kent State University, Kent, Ohio 44242 (United States); Tripathi, Suvagata; Twieg, Robert J. [Department of Chemistry, Kent State University, Kent, Ohio 44242 (United States)

    2015-10-07

    Liquid crystalline organic semiconductors are emerging candidates for applications in electronic and photonic devices. One of the most attractive aspects of such materials is the potential, in principle, to easily control and manipulate the molecular alignment of the semiconductor over large length scales. Here, we explore the consequences of alignment in a model smectic liquid crystalline semiconductor, and find that the photogeneration efficiency is a strong function of incident polarization in aligned samples. A straightforward theory shows that such behavior is a general feature of aligned materials, regardless of the details of photophysics. Furthermore, we uncover tentative evidence that the mobility of aligned samples is substantially enhanced. Both of these phenomena are of significant technological importance.

  4. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains

    KAUST Repository

    Diao, Ying

    2013-06-02

    Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of thin-film morphology. Here, we report an approach - termed fluid-enhanced crystal engineering (FLUENCE) - that allows for a high degree of morphological control of solution-printed thin films. We designed a micropillar-patterned printing blade to induce recirculation in the ink for enhancing crystal growth, and engineered the curvature of the ink meniscus to control crystal nucleation. Using FLUENCE, we demonstrate the fast coating and patterning of millimetre-wide, centimetre-long, highly aligned single-crystalline organic semiconductor thin films. In particular, we fabricated thin films of 6,13-bis(triisopropylsilylethynyl) pentacene having non-equilibrium single-crystalline domains and an unprecedented average and maximum mobilities of 8.1±1.2 cm2 V-1 s -1 and 11 cm2 V-1 s-1. FLUENCE of organic semiconductors with non-equilibrium single-crystalline domains may find use in the fabrication of high-performance, large-area printed electronics. © 2013 Macmillan Publishers Limited. All rights reserved.

  5. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains.

    Science.gov (United States)

    Diao, Ying; Tee, Benjamin C-K; Giri, Gaurav; Xu, Jie; Kim, Do Hwan; Becerril, Hector A; Stoltenberg, Randall M; Lee, Tae Hoon; Xue, Gi; Mannsfeld, Stefan C B; Bao, Zhenan

    2013-07-01

    Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of thin-film morphology. Here, we report an approach--termed fluid-enhanced crystal engineering (FLUENCE)--that allows for a high degree of morphological control of solution-printed thin films. We designed a micropillar-patterned printing blade to induce recirculation in the ink for enhancing crystal growth, and engineered the curvature of the ink meniscus to control crystal nucleation. Using FLUENCE, we demonstrate the fast coating and patterning of millimetre-wide, centimetre-long, highly aligned single-crystalline organic semiconductor thin films. In particular, we fabricated thin films of 6,13-bis(triisopropylsilylethynyl) pentacene having non-equilibrium single-crystalline domains and an unprecedented average and maximum mobilities of 8.1±1.2 cm(2) V(-1) s(-1) and 11 cm(2) V(-1) s(-1). FLUENCE of organic semiconductors with non-equilibrium single-crystalline domains may find use in the fabrication of high-performance, large-area printed electronics.

  6. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains

    Science.gov (United States)

    Diao, Ying; Tee, Benjamin C.-K.; Giri, Gaurav; Xu, Jie; Kim, Do Hwan; Becerril, Hector A.; Stoltenberg, Randall M.; Lee, Tae Hoon; Xue, Gi; Mannsfeld, Stefan C. B.; Bao, Zhenan

    2013-07-01

    Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of thin-film morphology. Here, we report an approach—termed fluid-enhanced crystal engineering (FLUENCE)—that allows for a high degree of morphological control of solution-printed thin films. We designed a micropillar-patterned printing blade to induce recirculation in the ink for enhancing crystal growth, and engineered the curvature of the ink meniscus to control crystal nucleation. Using FLUENCE, we demonstrate the fast coating and patterning of millimetre-wide, centimetre-long, highly aligned single-crystalline organic semiconductor thin films. In particular, we fabricated thin films of 6,13-bis(triisopropylsilylethynyl) pentacene having non-equilibrium single-crystalline domains and an unprecedented average and maximum mobilities of 8.1±1.2 cm2 V-1 s-1 and 11 cm2 V-1 s-1. FLUENCE of organic semiconductors with non-equilibrium single-crystalline domains may find use in the fabrication of high-performance, large-area printed electronics.

  7. Intrinsic spin and momentum relaxation in organic single-crystalline semiconductors probed by ESR and Hall measurements

    Science.gov (United States)

    Tsurumi, Junto; Häusermann, Roger; Watanabe, Shun; Mitsui, Chikahiko; Okamoto, Toshihiro; Matsui, Hiroyuki; Takeya, Jun

    Spin and charge momentum relaxation mechanism has been argued among organic semiconductors with various methods, devices, and materials. However, little is known in organic single-crystalline semiconductors because it has been hard to obtain an ideal organic crystal with an excellent crystallinity and controllability required for accurate measurements. By using more than 1-inch sized single crystals which are fabricated via contentious edge-casting method developed by our group, we have successfully demonstrated a simultaneous determination of spin and momentum relaxation time for gate-induced charges of 3,11-didecyldinaphtho[2,3- d:2',3'- d']benzo[1,2- b:4,5- b']dithiophene, by combining electron spin resonance (ESR) and Hall effect measurements. The obtained temperature dependences of spin and momentum relaxation times are in good agreement in terms of power law with a factor of approximately -2. It is concluded that Elliott-Yafet spin relaxation mechanism can be dominant at room temperature regime (200 - 300 K). Probing characteristic time scales such as spin-lattice, spin-spin, and momentum relaxation times, demonstrated in the present work, would be a powerful tool to elucidate fundamental spin and charge transport mechanisms. We acknowledge the New Energy and Industrial Technology Developing Organization (NEDO) for financial support.

  8. Liquid Crystalline Semiconductors Materials, properties and applications

    CERN Document Server

    Kelly, Stephen; O'Neill, Mary

    2013-01-01

    This is an exciting stage in the development of organic electronics. It is no longer an area of purely academic interest as increasingly real applications are being developed, some of which are beginning to come on-stream. Areas that have already been commercially developed or which are under intensive development include organic light emitting diodes (for flat panel displays and solid state lighting), organic photovoltaic cells, organic thin film transistors (for smart tags and flat panel displays) and sensors. Within the family of organic electronic materials, liquid crystals are relative newcomers. The first electronically conducting liquid crystals were reported in 1988 but already a substantial literature has developed. The advantage of liquid crystalline semiconductors is that they have the easy processability of amorphous and polymeric semiconductors but they usually have higher charge carrier mobilities. Their mobilities do not reach the levels seen in crystalline organics but they circumvent all of t...

  9. Intermolecular band dispersion of quasi-single crystalline organic semiconductor monolayer measured by angle-resolved photoemission spectroscopy

    Science.gov (United States)

    Ohtomo, Manabu; Shimada, Toshihiro; Hasegawa, Tetsuya

    2010-03-01

    Band structure of organic semiconductors is important knowledge to improve the molecular design. Angle-Resolved Photoemission Spectroscopy (ARPES) studies using highly conductive single domain samples grown in-situ is the most direct technique. In this study, we developed a novel method to grow quasi-single crystalline monolayer on conductive substrate and electronic structure was investigated. As a template for orientation control, we used a step-bunched Si(111) substrate with dangling bond termination. In case of pentacene, it was confirmed that the crystal is quasi-single crystal with 2.2^o rotated twins. The band dispersion was identical to that of thin-film phase. The effective mass and transfer integrals are evaluated using two-dimensional tight binding fit and compared with band calculations [1]. We also report the growth of 2,7-Dipheny[1]benzothieno[3,2-b]benzothiophene (DPh-BTBT) [2] on Bi-Si substrate and compare discuss its band structure. [4pt] [1] M.Ohtomo et al., APL 95, 123308 (2009).[0pt] [2] K.Takimiya, JACS 128, 3044 (2006).

  10. Lattice matched semiconductor growth on crystalline metallic substrates

    Science.gov (United States)

    Norman, Andrew G; Ptak, Aaron J; McMahon, William E

    2013-11-05

    Methods of fabricating a semiconductor layer or device and said devices are disclosed. The methods include but are not limited to providing a metal or metal alloy substrate having a crystalline surface with a known lattice parameter (a). The methods further include growing a crystalline semiconductor alloy layer on the crystalline substrate surface by coincident site lattice matched epitaxy. The semiconductor layer may be grown without any buffer layer between the alloy and the crystalline surface of the substrate. The semiconductor alloy may be prepared to have a lattice parameter (a') that is related to the lattice parameter (a). The semiconductor alloy may further be prepared to have a selected band gap.

  11. Semiconductors for organic transistors

    Directory of Open Access Journals (Sweden)

    Antonio Facchetti

    2007-03-01

    Full Text Available Organic molecules/polymers with a π-conjugated (heteroaromatic backbone are capable of transporting charge and interact efficiently with light. Therefore, these systems can act as semiconductors in opto-electronic devices similar to inorganic materials. However, organic chemistry offers tools for tailoring materials' functional properties via modifications of the molecular/monomeric units, opening new possibilities for inexpensive device manufacturing. This article reviews the fundamental aspects behind the structural design/realization of p- (hole transporting and n-channel (electron-transporting semiconductors for organic field-effect transistors (OFETs. An introduction to OFET principles and history, as well as of the state-of-the-art organic semiconductor structure and performance of OFETs is provided.

  12. Beyond amorphous organic semiconductors

    Science.gov (United States)

    Hanna, Jun-ichi

    2003-07-01

    Recently it has been discovered that some types of liquid crystals, which believed to be governed by ionic conduction, exhibit a very fast electronic conduction. Their charge carrier transport is characterized by high mobility over 10-2 cm2/Vs independent of electric field and temperature. Now, the liquid crystals are being recognized as a new class of organic semiconductors. In this article, a new aspect of liquid crystals as a self-organizing molecular semiconductor are reviewed, focused on their basic charge carrier transport properties and discussed in comparison with those of molecular crystals and amorphous materials. And it is concluded that the liquid crystal is promising as a quality organic semiconductor for the devices that require a high mobility.

  13. Polymer and Polymer Gel of Liquid Crystalline Semiconductors

    Institute of Scientific and Technical Information of China (English)

    Teppei Shimakawa; Naoki Yoshimoto; Jun-ichi Hanna

    2004-01-01

    It prepared a polymer and polymer gel of a liquid crystalline (LC) semiconductor having a 2-phenylnaphthalene moiety and studied their charge carrier transport properties by the time-of-flight technique. It is found that polyacrylate having the mesogenic core moiety of 2-phenylnaphtalene (PNP-acrylate) exhibited a comparable mobility of 10-4cm2/Vs in smectic A phase to those in smectic A (SmA) phase of small molecular liquid crystals with the same core moiety, e.g., 6-(4'-octylphenyl)- 2-dodecyloxynaphthalene (8-PNP-O12), and an enhanced mobility up to 10-3cm2/Vs in the LC-glassy phase at room temperature, when mixed with a small amount of 8-PNP-O12. On the other hand, the polymer gel consisting of 20 wt %-hexamethylenediacrylate (HDA)-based cross-linked polymer and 8-PNP-O12 exhibited no degraded mobility when cross-linked at the mesophase. These results indicate that the polymer and polymer composite of liquid crystalline semiconductors provide us with an easy way to realize a quality organic semiconductor thin film for the immediate device applications.

  14. Doping of organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Luessem, B.; Riede, M.; Leo, K. [Institut fuer Angewandte Photophysik, TU Dresden (Germany)

    2013-01-15

    The understanding and applications of organic semiconductors have shown remarkable progress in recent years. This material class has been developed from being a lab curiosity to the basis of first successful products as small organic LED (OLED) displays; other areas of application such as OLED lighting and organic photovoltaics are on the verge of broad commercialization. Organic semiconductors are superior to inorganic ones for low-cost and large-area optoelectronics due to their flexibility, easy deposition, and broad variety, making tailor-made materials possible. However, electrical doping of organic semiconductors, i.e. the controlled adjustment of Fermi level that has been extremely important to the success of inorganic semiconductors, is still in its infancy. This review will discuss recent work on both fundamental principles and applications of doping, focused primarily to doping of evaporated organic layers with molecular dopants. Recently, both p- and n-type molecular dopants have been developed that lead to efficient and stable doping of organic thin films. Due to doping, the conductivity of the doped layers increases several orders of magnitude and allows for quasi-Ohmic contacts between organic layers and metal electrodes. Besides reducing voltage losses, doping thus also gives design freedom in terms of transport layer thickness and electrode choice. The use of doping in applications like OLEDs and organic solar cells is highlighted in this review. Overall, controlled molecular doping can be considered as key enabling technology for many different organic device types that can lead to significant improvements in efficiencies and lifetimes. (Copyright copyright 2013 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. Semiconductors for organic transistors

    OpenAIRE

    Antonio Facchetti

    2007-01-01

    Organic molecules/polymers with a π-conjugated (hetero)aromatic backbone are capable of transporting charge and interact efficiently with light. Therefore, these systems can act as semiconductors in opto-electronic devices similar to inorganic materials. However, organic chemistry offers tools for tailoring materials' functional properties via modifications of the molecular/monomeric units, opening new possibilities for inexpensive device manufacturing. This article reviews the fundamental as...

  16. Physics of Organic Semiconductors

    CERN Document Server

    Brütting, Wolfgang

    2005-01-01

    Filling the gap in the literature currently available, this book presents an overview of our knowledge of the physics behind organic semiconductor devices. Contributions from 18 international research groups cover various aspects of this field, ranging from the growth of organic layers and crystals, their electronic properties at interfaces, their photophysics and electrical transport properties to the application of these materials in such different devices as organic field-effect transistors, photovoltaic cells and organic light-emitting diodes. From the contents:. * Excitation Dynamics in O

  17. Stretchable Organic Semiconductor Devices.

    Science.gov (United States)

    Qian, Yan; Zhang, Xinwen; Xie, Linghai; Qi, Dianpeng; Chandran, Bevita K; Chen, Xiaodong; Huang, Wei

    2016-11-01

    Stretchable electronics are essential for the development of intensely packed collapsible and portable electronics, wearable electronics, epidermal and bioimplanted electronics, 3D surface compliable devices, bionics, prosthesis, and robotics. However, most stretchable devices are currently based on inorganic electronics, whose high cost of fabrication and limited processing area make it difficult to produce inexpensive, large-area devices. Therefore, organic stretchable electronics are highly attractive due to many advantages over their inorganic counterparts, such as their light weight, flexibility, low cost and large-area solution-processing, the reproducible semiconductor resources, and the easy tuning of their properties via molecular tailoring. Among them, stretchable organic semiconductor devices have become a hot and fast-growing research field, in which great advances have been made in recent years. These fantastic advances are summarized here, focusing on stretchable organic field-effect transistors, light-emitting devices, solar cells, and memory devices.

  18. Circuit design techniques for non-crystalline semiconductors

    CERN Document Server

    Sambandan, Sanjiv

    2012-01-01

    Despite significant progress in materials and fabrication technologies related to non-crystalline semiconductors, fundamental drawbacks continue to limit real-world application of these devices in electronic circuits. To help readers deal with problems such as low mobility and intrinsic time variant behavior, Circuit Design Techniques for Non-Crystalline Semiconductors outlines a systematic design approach, including circuit theory, enabling users to synthesize circuits without worrying about the details of device physics. This book: Offers examples of how self-assembly can be used as a powerf

  19. Optical Properties of Non-Crystalline Semiconductors.

    Science.gov (United States)

    1984-01-01

    Instruments, 1974, unpublished. 42. de Neufville, J.P., Photostructural transformations in amorphous solids, 0 in Optical Properties of Solids --New...semiconductors, in Optical Properties of Solids , Nudelman, S., and Mitra, S.S., eds., Plenum, N.Y., 1969, 123. 52. Cody, G.D., Brooks, B.G., and

  20. Band structure engineering in organic semiconductors

    Science.gov (United States)

    Schwarze, Martin; Tress, Wolfgang; Beyer, Beatrice; Gao, Feng; Scholz, Reinhard; Poelking, Carl; Ortstein, Katrin; Günther, Alrun A.; Kasemann, Daniel; Andrienko, Denis; Leo, Karl

    2016-06-01

    A key breakthrough in modern electronics was the introduction of band structure engineering, the design of almost arbitrary electronic potential structures by alloying different semiconductors to continuously tune the band gap and band-edge energies. Implementation of this approach in organic semiconductors has been hindered by strong localization of the electronic states in these materials. We show that the influence of so far largely ignored long-range Coulomb interactions provides a workaround. Photoelectron spectroscopy confirms that the ionization energies of crystalline organic semiconductors can be continuously tuned over a wide range by blending them with their halogenated derivatives. Correspondingly, the photovoltaic gap and open-circuit voltage of organic solar cells can be continuously tuned by the blending ratio of these donors.

  1. Organic Field-Effect Transistors Based on a Liquid-Crystalline Polymeric Semiconductor using SU-8 Gate Dielectrics onFlexible Substrates

    Directory of Open Access Journals (Sweden)

    Kornelius Tetzner

    2014-10-01

    Full Text Available In this work, the insulating properties of poly(4-vinylphenol (PVP and SU-8 (MicroChem, Westborough, MA, USA dielectrics are analyzed and compared with each other. We further investigate the performance behavior of organic field-effect transistors based on a semiconducting liquid-crystal polymer (LCP using both dielectric materials and evaluate the results regarding the processability. Due to the lower process temperature needed for the SU-8 deposition, the realization of organic transistors on flexible substrates is demonstrated showing comparable charge carrier mobilities to devices using PVP on glass. In addition, a µ-dispensing procedure of the LCP on SU-8 is presented, improving the switching behavior of the organic transistors, and the promising stability data of the SU-8/LCP stack are verified after storing the structures for 60 days in ambient air showing negligible irreversible degradation of the organic semiconductor.

  2. Anisotropy-based crystalline oxide-on-semiconductor material

    Science.gov (United States)

    McKee, Rodney Allen; Walker, Frederick Joseph

    2000-01-01

    A semiconductor structure and device for use in a semiconductor application utilizes a substrate of semiconductor-based material, such as silicon, and a thin film of a crystalline oxide whose unit cells are capable of exhibiting anisotropic behavior overlying the substrate surface. Within the structure, the unit cells of the crystalline oxide are exposed to an in-plane stain which influences the geometric shape of the unit cells and thereby arranges a directional-dependent quality of the unit cells in a predisposed orientation relative to the substrate. This predisposition of the directional-dependent quality of the unit cells enables the device to take beneficial advantage of characteristics of the structure during operation. For example, in the instance in which the crystalline oxide of the structure is a perovskite, a spinel or an oxide of similarly-related cubic structure, the structure can, within an appropriate semiconductor device, exhibit ferroelectric, piezoelectric, pyroelectric, electro-optic, ferromagnetic, antiferromagnetic, magneto-optic or large dielectric properties that synergistically couple to the underlying semiconductor substrate.

  3. Organic semiconductors in a spin

    CERN Document Server

    Samuel, I

    2002-01-01

    A little palladium can go a long way in polymer-based light-emitting diodes. Inorganic semiconductors such as silicon and gallium arsenide are essential for countless applications in everyday life, ranging from PCs to CD players. However, while they offer unrivalled computational speed, inorganic semiconductors are also rigid and brittle, which means that they are less suited to applications such as displays and flexible electronics. A completely different class of materials - organic semiconductors - are being developed for these applications. Organic semiconductors have many attractive features: they are easy to make, they can emit visible light, and there is tremendous scope for tailoring their properties to specific applications by changing their chemical structure. Research groups and companies around the world have developed a wide range of organic-semiconductor devices, including transistors, light-emitting diodes (LEDs), solar cells and lasers. (U.K.)

  4. Growth of crystalline semiconductor materials on crystal surfaces

    CERN Document Server

    Aleksandrov, L

    2013-01-01

    Written for physicists, chemists, and engineers specialising in crystal and film growth, semiconductor electronics, and various applications of thin films, this book reviews promising scientific and engineering trends in thin films and thin-films materials science. The first part discusses the physical characteristics of the processes occurring during the deposition and growth of films, the principal methods of obtaining semiconductor films and of reparing substrate surfaces on which crystalline films are grown, and the main applications of films. The second part contains data on epitaxial i

  5. Organic Semiconductors and its Applications

    Science.gov (United States)

    Kamalasanan, M. N.

    2011-10-01

    Organic semiconductors in the form of evaporated or spin coated thin films have many optoelectronic applications in the present electronic industry. They are frequently used in many type of displays, photo detectors, photoconductors for photocopiers and photovoltaic cells. But many p-conjugated molecules and polymer based devices do not provide satisfactory device performance and operational stability. Most of these problems are related to the interfaces they make with other organic materials and electrodes and the low conductivity of the organic layers. The study of organic-metal and organic—organic interfaces as well as electrical doping of organic semiconductors are very important areas of research at present. In this talk, I will be discussing some of the recent advances in this field as well as some of our own results in the area of interface modification and electrical doping of organic semiconductors.

  6. Spectroscopic characterisation of the erbium impurity in crystalline semiconductors

    Science.gov (United States)

    Ammerlaan, C. A. J.

    2001-12-01

    A scheme for the numerical calculation of energy levels of rare-earth ions in a crystalline solid is presented. Stark fields of cubic, trigonal, tetragonal, orthorhombic and monoclinic symmetry are considered. As examples, optical luminescence spectra of erbium in the semiconductors zinc selenide and silicon are analysed. Based on the optical characterisation, the g tensors for Zeeman splitting in an applied magnetic field are predicted for the crystal-field ground states of these centres.

  7. Organic semiconductors in sensor applications

    CERN Document Server

    Malliaras, George; Owens, Róisín

    2008-01-01

    Organic semiconductors offer unique characteristics such as tunability of electronic properties via chemical synthesis, compatibility with mechanically flexible substrates, low-cost manufacturing, and facile integration with chemical and biological functionalities. These characteristics have prompted the application of organic semiconductors and their devices in physical, chemical, and biological sensors. This book covers this rapidly emerging field by discussing both optical and electrical sensor concepts. Novel transducers based on organic light-emitting diodes and organic thin-film transistors, as well as systems-on-a-chip architectures are presented. Functionalization techniques to enhance specificity are outlined, and models for the sensor response are described.

  8. Conduit for high temperature transfer of molten semiconductor crystalline material

    Science.gov (United States)

    Fiegl, George (Inventor); Torbet, Walter (Inventor)

    1983-01-01

    A conduit for high temperature transfer of molten semiconductor crystalline material consists of a composite structure incorporating a quartz transfer tube as the innermost member, with an outer thermally insulating layer designed to serve the dual purposes of minimizing heat losses from the quartz tube and maintaining mechanical strength and rigidity of the conduit at the elevated temperatures encountered. The composite structure ensures that the molten semiconductor material only comes in contact with a material (quartz) with which it is compatible, while the outer layer structure reinforces the quartz tube, which becomes somewhat soft at molten semiconductor temperatures. To further aid in preventing cooling of the molten semiconductor, a distributed, electric resistance heater is in contact with the surface of the quartz tube over most of its length. The quartz tube has short end portions which extend through the surface of the semiconductor melt and which are lef bare of the thermal insulation. The heater is designed to provide an increased heat input per unit area in the region adjacent these end portions.

  9. Exciton Transport in Organic Semiconductors

    Science.gov (United States)

    Menke, Stephen Matthew

    Photovoltaic cells based on organic semiconductors are attractive for their use as a renewable energy source owing to their abundant feedstock and compatibility with low-cost coating techniques on flexible substrates. In contrast to photovoltaic cells based traditional inorganic semiconductors, photon absorption in an organic semiconductor results in the formation of a coulombically bound electron-hole pair, or exciton. The transport of excitons, consequently, is of critical importance as excitons mediate the interaction between charge and light in organic photovoltaic cells (OPVs). In this dissertation, a strong connection between the fundamental photophysical parameters that control nanoscopic exciton energy transfer and the mesoscopic exciton transport is established. With this connection in place, strategies for enhancing the typically short length scale for exciton diffusion (L D) can be developed. Dilution of the organic semiconductor boron subphthalocyanine chloride (SubPc) is found to increase the LD for SubPc by 50%. In turn, OPVs based on dilute layers of SubPc exhibit a 30% enhancement in power conversion efficiency. The enhancement in power conversion efficiency is realized via enhancements in LD, optimized optical spacing, and directed exciton transport at an exciton permeable interface. The role of spin, energetic disorder, and thermal activation on L D are also addressed. Organic semiconductors that exhibit thermally activated delayed fluorescence and efficient intersystem and reverse intersystem crossing highlight the balance between singlet and triplet exciton energy transfer and diffusion. Temperature dependent measurements for LD provide insight into the inhomogeneously broadened exciton density of states and the thermal nature of exciton energy transfer. Additional topics include energy-cascade OPV architectures and broadband, spectrally tunable photodetectors based on organic semiconductors.

  10. Generic process for preparing a crystalline oxide upon a group IV semiconductor substrate

    Science.gov (United States)

    McKee, Rodney A.; Walker, Frederick J.; Chisholm, Matthew F.

    2000-01-01

    A process for growing a crystalline oxide epitaxially upon the surface of a Group IV semiconductor, as well as a structure constructed by the process, is described. The semiconductor can be germanium or silicon, and the crystalline oxide can generally be represented by the formula (AO).sub.n (A'BO.sub.3).sub.m in which "n" and "m" are non-negative integer repeats of planes of the alkaline earth oxides or the alkaline earth-containing perovskite oxides. With atomic level control of interfacial thermodynamics in a multicomponent semiconductor/oxide system, a highly perfect interface between a semiconductor and a crystalline oxide can be obtained.

  11. Growth of coincident site lattice matched semiconductor layers and devices on crystalline substrates

    Science.gov (United States)

    Norman, Andrew G; Ptak, Aaron J

    2013-08-13

    Methods of fabricating a semiconductor layer or device and said devices are disclosed. The methods include but are not limited to providing a substrate having a crystalline surface with a known lattice parameter (a). The method further includes growing a crystalline semiconductor layer on the crystalline substrate surface by coincident site lattice matched epitaxy, without any buffer layer between the crystalline semiconductor layer and the crystalline surface of the substrate. The crystalline semiconductor layer will be prepared to have a lattice parameter (a') that is related to the substrate lattice parameter (a). The lattice parameter (a') maybe related to the lattice parameter (a) by a scaling factor derived from a geometric relationship between the respective crystal lattices.

  12. History of crystalline organic conductor

    Science.gov (United States)

    Murata, Keizo

    2017-05-01

    A brief view of crystalline organic conductor is presented. Since the discovery of TTF-TCNQ (tetrathiafulvalene-tetracyanoquinodimethane) in the mid 1970’s, pressure has been an indispensable tool to develop the physics of this field. From the aspect of charge transfer salt, TTF-TCNQ and its family was specified with partial charge transfer, two chain one-dimensional (1D) system, charge density wave (CDW) and commensurability. On the other hand, in (TMTSF)2X family (TMTSF: tetramethyltetraselenafulvalene, X: electron acceptor such as PF6, ClO4), complete charge transfer, one chain system, spin density wave (SDW), field-induced SDW, quantum Hall effect, superconductivity were discussed. Further, together with pressure itself, cooling rate was noticed to be important for low temperature properties. Recently, coming back to TTF-TCNQ family, i.e., HMTSF-TCNQ, whether or not field-induced CDW, instead of field-induced SDW, and quantum Hall effect is present was discussed (HMTSF: hexamethylene-tetraselenafulvalene). Whether or not the Fermiology in (TMTTF)2X under pressure is similar to that of (TMTSF)2X is discussed as well. In (BEDT-TTF)2X, new aspect of macroscopic polarization of α-(BEDT-TTF)2I3 related to charge order is described. At the end, in contrast to the charge transfer salts, non-charge transfer salt, that is, single component conductor is presented as a new possible example of Dirac cone, which was deeply studied by many researchers in α-(BEDT-TTF)2I3, together with the theoretical calculation of its magnetic susceptibility (BEDT-TTF: bisethylenedithia-tetrathiafulvalene).

  13. Spin relaxation in organic semiconductors

    Science.gov (United States)

    Bobbert, Peter

    2011-03-01

    Intriguing magnetic field effects in organic semiconductor devices have been reported: anomalous magnetoresistance in organic spin valves and large effects of small magnetic fields on the current and luminescence of organic light-emitting diodes. Influences of isotopic substitution on these effects points at the role of hyperfine coupling. We performed studies of spin relaxation in organic semiconductors based on (i) coherent spin precession of the electron spin in an effective magnetic field consisting of a random hyperfine field and an applied magnetic field and (ii) incoherent hopping of charges. These ingredients are incorporated in a stochastic Liouville equation for the dynamics of the spin density matrix of single charges as well as pairs of charges. For single charges we find a spin diffusion length that depends on the magnetic field, explaining anomalous magnetoresistance in organic spin valves. For pairs of charges we show that the magnetic field influences formation of singlet bipolarons, in the case of like charges, and singlet and triplet excitons, in the case of opposite charges. We can reproduce different line shapes of reported magnetic field effects, including recently found effects at ultra-small fields.

  14. Epitaxial Growth of Cubic Crystalline Semiconductor Alloys on Basal Plane of Trigonal or Hexagonal Crystal

    Science.gov (United States)

    Park, Yeonjoon (Inventor); Choi, Sang H. (Inventor); King, Glen C. (Inventor)

    2011-01-01

    Hetero-epitaxial semiconductor materials comprising cubic crystalline semiconductor alloys grown on the basal plane of trigonal and hexagonal substrates, in which misfit dislocations are reduced by approximate lattice matching of the cubic crystal structure to underlying trigonal or hexagonal substrate structure, enabling the development of alloyed semiconductor layers of greater thickness, resulting in a new class of semiconductor materials and corresponding devices, including improved hetero-bipolar and high-electron mobility transistors, and high-mobility thermoelectric devices.

  15. Spectroscopy of Charge Carriers and Traps in Field-Doped Single Crystal Organic Semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Xiaoyang [Columbia Univ., New York, NY (United States); Frisbie, Daniel [Univ. of Minnesota, Minneapolis, MN (United States)

    2017-03-31

    The proposed research aims to achieve quantitative, molecular level understanding of charge carriers and traps in field-doped crystalline organic semiconductors via in situ linear and nonlinear optical spectroscopy, in conjunction with transport measurements and molecular/crystal engineering.

  16. Crystallization of Organic Semiconductor Molecules in Nanosized Cavities

    DEFF Research Database (Denmark)

    Milita, Silvia; Dionigi, Chiara; Borgatti, Francesco

    2008-01-01

    evaporation. Thanks to these real time experiments, the phase content and the crystalline domain orientation of H4T6 have been determined, from the onset of the first crystalline molecular assembly to the stable system. The correlation between the bead size dependent crystallization mechanism in this complex......The crystallization of an organic semiconductor, viz., tetrahexil-sexithiophene (H4T6) molecules, confined into nanosized cavities of a self-organized polystyrene beads template, has been investigated by means of in situ grazing incidence X-ray diffraction measurements, during the solvent...

  17. Single crystalline growth of a soluble organic semiconductor in a parallel aligned liquid crystal solvent using rubbing-treated polyimide films

    Science.gov (United States)

    Matsuzaki, Tomoya; Shibata, Yosei; Takeda, Risa; Ishinabe, Takahiro; Fujikake, Hideo

    2017-01-01

    For directional control of organic single crystals, we propose a crystal growth method using liquid crystal as the solvent. In this study, we examined the formation of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) single crystals using a parallel aligned liquid crystal (LC) cell and rubbing-treated polyimide films in order to clarify the effects of LC alignment on anisotropic C8-BTBT crystal growth. Based on the results, we found that the crystal growth direction of C8-BTBT single crystals was related to the direction of the aligned LC molecules because of rubbing treatment. Moreover, by optical evaluation, we found that the C8-BTBT single crystals have a aligned molecular structure.

  18. Exploration of exciton delocalization in organic crystalline thin films

    Science.gov (United States)

    Hua, Kim; Manning, Lane; Rawat, Naveen; Ainsworth, Victoria; Furis, Madalina

    The electronic properties of organic semiconductors play a crucial role in designing new materials for specific applications. Our group recently found evidence for a rotation of molecular planes in phthalocyanines that is responsible for the disappearance of a delocalized exciton in these systems for T >150K.................()().......1 In this study, we attempt to tune the exciton delocalization of small organic molecules using strain effects and alloying different molecules in the same family. The exciton behavior is monitored using time- and polarization resolved photolumniscence (PL) spectroscopy as a function of temperature. Specifically, organic crystalline thin films of octabutoxy phthalocyanine (H2OBPc), octyloxy phthalocyanines and H-bonded semiconductors such as the quinacridone and indigo derivatives are deposited on flexible substrates (i.e. Kapton and PEN) using an in-house developed pen-writing method.........2 that results in crystalline films with macroscopic long range order. The room temperature PL studies show redshift and changes in polarization upon bending of the film. Crystalline thin films of alloyed H2OBPc and octabutoxy naphthalocyanine with ratios ranging from 1:1 to 100:1 fabricated on both sapphire and flexible substrates are also explored using the same PL spectroscopy to elucidate the behaviors of delocalized excitons. .1N. Rawat, et al., J Phys Chem Lett 6, 1834 (2015). 2R. L. Headrick, et al., Applied Physics Letters 92, 063302 (2008). NSF DMR-1056589, NSF DMR-1062966.

  19. Self Organization in Compensated Semiconductors

    Science.gov (United States)

    Berezin, Alexander A.

    2004-03-01

    In partially compensated semiconductor (PCS) Fermi level is pinned to donor sub-band. Due to positional randomness and almost isoenergetic hoppings, donor-spanned electronic subsystem in PCS forms fluid-like highly mobile collective state. This makes PCS playground for pattern formation, self-organization, complexity emergence, electronic neural networks, and perhaps even for origins of life, bioevolution and consciousness. Through effects of impact and/or Auger ionization of donor sites, whole PCS may collapse (spinodal decomposition) into microblocks potentially capable of replication and protobiological activity (DNA analogue). Electronic screening effects may act in RNA fashion by introducing additional length scale(s) to system. Spontaneous quantum computing on charged/neutral sites becomes potential generator of informationally loaded microstructures akin to "Carl Sagan Effect" (hidden messages in Pi in his "Contact") or informational self-organization of "Library of Babel" of J.L. Borges. Even general relativity effects at Planck scale (R.Penrose) may affect the dynamics through (e.g.) isotopic variations of atomic mass and local density (A.A.Berezin, 1992). Thus, PCS can serve as toy model (experimental and computational) at interface of physics and life sciences.

  20. Organic semiconductor growth and morphology considerations for organic thin-film transistors.

    Science.gov (United States)

    Virkar, Ajay A; Mannsfeld, Stefan; Bao, Zhenan; Stingelin, Natalie

    2010-09-08

    Analogous to conventional inorganic semiconductors, the performance of organic semiconductors is directly related to their molecular packing, crystallinity, growth mode, and purity. In order to achieve the best possible performance, it is critical to understand how organic semiconductors nucleate and grow. Clever use of surface and dielectric modification chemistry can allow one to control the growth and morphology, which greatly influence the electrical properties of the organic transistor. In this Review, the nucleation and growth of organic semiconductors on dielectric surfaces is addressed. The first part of the Review concentrates on small-molecule organic semiconductors. The role of deposition conditions on film formation is described. The modification of the dielectric interface using polymers or self-assembled mono-layers and their effect on organic-semiconductor growth and performance is also discussed. The goal of this Review is primarily to discuss the thin-film formation of organic semiconducting species. The patterning of single crystals is discussed, while their nucleation and growth has been described elsewhere (see the Review by Liu et. al).([¹]) The second part of the Review focuses on polymeric semiconductors. The dependence of physico-chemical properties, such as chain length (i.e., molecular weight) of the constituting macromolecule, and the influence of small molecular species on, e.g., melting temperature, as well as routes to induce order in such macromolecules, are described.

  1. Method of transferring a thin crystalline semiconductor layer

    Science.gov (United States)

    Nastasi, Michael A.; Shao, Lin; Theodore, N. David

    2006-12-26

    A method for transferring a thin semiconductor layer from one substrate to another substrate involves depositing a thin epitaxial monocrystalline semiconductor layer on a substrate having surface contaminants. An interface that includes the contaminants is formed in between the deposited layer and the substrate. Hydrogen atoms are introduced into the structure and allowed to diffuse to the interface. Afterward, the thin semiconductor layer is bonded to a second substrate and the thin layer is separated away at the interface, which results in transferring the thin epitaxial semiconductor layer from one substrate to the other substrate.

  2. Synthesis and Characterization of Novel Organic Semiconductors

    Institute of Scientific and Technical Information of China (English)

    Prashant; Sonar; Samarendra; P.Singh; Ananth; Dodabalapur; Alan; Sellinger

    2007-01-01

    1 Results Development of new organic semiconductors for use in low-cost,large-area applications is very important for growth of the organic electronic industry.Existing non-polymer based organic semiconductors can be roughly classified into linear,star-shaped,branched or lamellar molecules on the basis of their shape[1]. Generally hole (p-type) and electron (n-type) transporting semiconductors have been prepared from electron donating and accepting π-systems respectively[2]. These materials can be used ...

  3. Charge transport in single crystal organic semiconductors

    Science.gov (United States)

    Xie, Wei

    Organic electronics have engendered substantial interest in printable, flexible and large-area applications thanks to their low fabrication cost per unit area, chemical versatility and solution processability. Nevertheless, fundamental understanding of device physics and charge transport in organic semiconductors lag somewhat behind, partially due to ubiquitous defects and impurities in technologically useful organic thin films, formed either by vacuum deposition or solution process. In this context, single-crystalline organic semiconductors, or organic single crystals, have therefore provided the ideal system for transport studies. Organic single crystals are characterized by their high chemical purity and outstanding structural perfection, leading to significantly improved electrical properties compared with their thin-film counterparts. Importantly, the surfaces of the crystals are molecularly flat, an ideal condition for building field-effect transistors (FETs). Progress in organic single crystal FETs (SC-FETs) is tremendous during the past decade. Large mobilities ~ 1 - 10 cm2V-1s-1 have been achieved in several crystals, allowing a wide range of electrical, optical, mechanical, structural, and theoretical studies. Several challenges still remain, however, which are the motivation of this thesis. The first challenge is to delineate the crystal structure/electrical property relationship for development of high-performance organic semiconductors. This thesis demonstrates a full spectrum of studies spanning from chemical synthesis, single crystal structure determination, quantum-chemical calculation, SC-OFET fabrication, electrical measurement, photoelectron spectroscopy characterization and extensive device optimization in a series of new rubrene derivatives, motivated by the fact that rubrene is a benchmark semiconductor with record hole mobility ~ 20 cm2V-1s-1. With successful preservation of beneficial pi-stacking structures, these rubrene derivatives form

  4. Electroless silver plating of the surface of organic semiconductors.

    Science.gov (United States)

    Campione, Marcello; Parravicini, Matteo; Moret, Massimo; Papagni, Antonio; Schröter, Bernd; Fritz, Torsten

    2011-10-04

    The integration of nanoscale processes and devices demands fabrication routes involving rapid, cost-effective steps, preferably carried out under ambient conditions. The realization of the metal/organic semiconductor interface is one of the most demanding steps of device fabrication, since it requires mechanical and/or thermal treatments which increment costs and are often harmful in respect to the active layer. Here, we provide a microscopic analysis of a room temperature, electroless process aimed at the deposition of a nanostructured metallic silver layer with controlled coverage atop the surface of single crystals and thin films of organic semiconductors. This process relies on the reaction of aqueous AgF solutions with the nonwettable crystalline surface of donor-type organic semiconductors. It is observed that the formation of a uniform layer of silver nanoparticles can be accomplished within 20 min contact time. The electrical characterization of two-terminal devices performed before and after the aforementioned treatment shows that the metal deposition process is associated with a redox reaction causing the p-doping of the semiconductor.

  5. ULTRATHIN SILICON MEMBRANES TO STUDY SUPERCURRENT TRANSPORT IN CRYSTALLINE SEMICONDUCTORS

    NARCIS (Netherlands)

    VANHUFFELEN, WM; DEBOER, MJ; KLAPWIJK, TM

    1991-01-01

    We have developed a two-step anisotropic etching process to fabricate thin silicon membranes, used to study supercurrent transport in semiconductor coupled weak links. The process uses a shallow BF2+ implantation, and permits easy control of membrane thickness less-than-or-equal-to 100 nm. Prelimina

  6. Architectures for Improved Organic Semiconductor Devices

    Science.gov (United States)

    Beck, Jonathan H.

    Advancements in the microelectronics industry have brought increasing performance and decreasing prices to a wide range of users. Conventional silicon-based electronics have followed Moore's law to provide an ever-increasing integrated circuit transistor density, which drives processing power, solid-state memory density, and sensor technologies. As shrinking conventional integrated circuits became more challenging, researchers began exploring electronics with the potential to penetrate new applications with a low price of entry: "Electronics everywhere." The new generation of electronics is thin, light, flexible, and inexpensive. Organic electronics are part of the new generation of thin-film electronics, relying on the synthetic flexibility of carbon molecules to create organic semiconductors, absorbers, and emitters which perform useful tasks. Organic electronics can be fabricated with low energy input on a variety of novel substrates, including inexpensive plastic sheets. The potential ease of synthesis and fabrication of organic-based devices means that organic electronics can be made at very low cost. Successfully demonstrated organic semiconductor devices include photovoltaics, photodetectors, transistors, and light emitting diodes. Several challenges that face organic semiconductor devices are low performance relative to conventional devices, long-term device stability, and development of new organic-compatible processes and materials. While the absorption and emission performance of organic materials in photovoltaics and light emitting diodes is extraordinarily high for thin films, the charge conduction mobilities are generally low. Building highly efficient devices with low-mobility materials is one challenge. Many organic semiconductor films are unstable during fabrication, storage, and operation due to reactions with water, oxygen and hydroxide. A final challenge facing organic electronics is the need for new processes and materials for electrodes

  7. Organic semiconductors for organic field-effect transistors

    Directory of Open Access Journals (Sweden)

    Yoshiro Yamashita

    2009-01-01

    Full Text Available The advantages of organic field-effect transistors (OFETs, such as low cost, flexibility and large-area fabrication, have recently attracted much attention due to their electronic applications. Practical transistors require high mobility, large on/off ratio, low threshold voltage and high stability. Development of new organic semiconductors is key to achieving these parameters. Recently, organic semiconductors have been synthesized showing comparable mobilities to amorphous-silicon-based FETs. These materials make OFETs more attractive and their applications have been attempted. New organic semiconductors resulting in high-performance FET devices are described here and the relationship between transistor characteristics and chemical structure is discussed.

  8. Centro-Apical Self-Organization of Organic Semiconductors in a Line-Printed Organic Semiconductor: Polymer Blend for One-Step Printing Fabrication of Organic Field-Effect Transistors.

    Science.gov (United States)

    Lee, Su Jin; Kim, Yong-Jae; Yeo, So Young; Lee, Eunji; Lim, Ho Sun; Kim, Min; Song, Yong-Won; Cho, Jinhan; Lim, Jung Ah

    2015-09-11

    Here we report the first demonstration for centro-apical self-organization of organic semiconductors in a line-printed organic semiconductor: polymer blend. Key feature of this work is that organic semiconductor molecules were vertically segregated on top of the polymer phase and simultaneously crystallized at the center of the printed line pattern after solvent evaporation without an additive process. The thickness and width of the centro-apically segregated organic semiconductor crystalline stripe in the printed blend pattern were controlled by varying the relative content of the organic semiconductors, printing speed, and solution concentrations. The centro-apical self-organization of organic semiconductor molecules in a printed polymer blend may be attributed to the combination of an energetically favorable vertical phase-separation and hydrodynamic fluids inside the droplet during solvent evaporation. Finally, a centro-apically phase-separated bilayer structure of organic semiconductor: polymer blend was successfully demonstrated as a facile method to form the semiconductor and dielectric layer for OFETs in one- step.

  9. Fabrication of reliable semiconductor nanowires by controlling crystalline structure.

    Science.gov (United States)

    Kim, Sangdan; Lim, Taekyung; Ju, Sanghyun

    2011-07-29

    One-dimensional SnO(2) nanomaterials with wide bandgap characteristics are attractive for flexible and/or transparent displays and high-performance nano-electronics. In this study, the crystallinity of SnO(2) nanowires was regulated by controlling their growth temperatures. Moreover, the correlation of the crystallinity of nanowires with optical and electrical characteristics was analyzed. When SnO(2) nanowires were grown at temperatures below 900 °C, they showed various growth directions and abnormal discontinuity in their crystal structures. On the other hand, most nanowires grown at 950 °C exhibited a regular growth trend in the direction of [100]. In addition, the low temperature photoluminescence measurement revealed that the higher growth temperatures of nanowires gradually decreased the 500 nm peak rather than the 620 nm peak. The former peak is derived from the surface defect related to the shallow energy level and affects nanowire surface states. Owing to crystallinity and defects, the threshold voltage range (maximum-minimum) of SnO(2) nanowire transistors was 1.5 V at 850 °C, 1.1 V at 900 °C, and 0.5 V at 950 °C, with dispersion characteristics dramatically decreased. This study successfully demonstrated the effects of nanowire crystallinity on optical and electrical characteristics. It also suggested that the optical and electrical characteristics of nanowire transistors could be regulated by controlling their growth temperatures in the course of producing SnO(2) nanowires.

  10. Micro- and nanocrystals of organic semiconductors.

    Science.gov (United States)

    Li, Rongjin; Hu, Wenping; Liu, Yunqi; Zhu, Daoben

    2010-04-20

    Organic semiconductors have attracted wide attention in recent decades, resulting in the rapid development of organic electronics. For example, the solution processibility of organic semiconductors allows researchers to use unconventional deposition methods (such as inkjet printing and stamping) to fabricate large area devices at low cost. The mechanical properties of organic semiconductors also allow for flexible electronics. However, the most distinguishing feature of organic semiconductors is their chemical versatility, which permits the incorporation of functionalities through molecular design. However, key scientific challenges remain before organic electronics technology can advance further, including both the materials' low charge carrier mobility and researchers' limited knowledge of structure-property relationships in organic semiconductors. We expect that high-quality organic single crystals could overcome these challenges: their purity and long-range ordered molecular packing ensure high device performance and facilitate the study of structure-property relationships. Micro- and nanoscale organic crystals could offer practical advantages compared with their larger counterparts. First, growing small crystals conserves materials and saves time. Second, devices based on the smaller crystals could maintain the functional advantages of larger organic single crystals but would avoid the growth of large crystals, leading to the more efficient characterization of organic semiconductors. Third, the effective use of small crystals could allow researchers to integrate these materials into micro- and nanoelectronic devices using a "bottom-up" approach. Finally, unique properties of crystals at micro- and nanometer scale lead to new applications, such as flexible electronics. In this Account, we focus on organic micro- and nanocrystals, including their design, the controllable growth of crystals, and structure-property studies. We have also fabricated devices and

  11. Lattice-Matched Semiconductor Layers on Single Crystalline Sapphire Substrate

    Science.gov (United States)

    Choi, Sang; King, Glen; Park, Yeonjoon

    2009-01-01

    SiGe is an important semiconductor alloy for high-speed field effect transistors (FETs), high-temperature thermoelectric devices, photovoltaic solar cells, and photon detectors. The growth of SiGe layer is difficult because SiGe alloys have different lattice constants from those of the common Si wafers, which leads to a high density of defects, including dislocations, micro-twins, cracks, and delaminations. This innovation utilizes newly developed rhombohedral epitaxy of cubic semiconductors on trigonal substrates in order to solve the lattice mismatch problem of SiGe by using trigonal single crystals like sapphire (Al2O3) as substrate to give a unique growth-orientation to the SiGe layer, which is automatically controlled at the interface upon sapphire (0001). This technology is different from previous silicon on insulator (SOI) or SGOI (SiGe on insulator) technologies that use amorphous SiO2 as the growth plane. A cubic semiconductor crystal is a special case of a rhombohedron with the inter-planar angle, alpha = 90 deg. With a mathematical transformation, all rhombohedrons can be described by trigonal crystal lattice structures. Therefore, all cubic lattice constants and crystal planes (hkl) s can be transformed into those of trigonal crystal parameters. These unique alignments enable a new opportunity of perfect lattice matching conditions, which can eliminate misfit dislocations. Previously, these atomic alignments were thought to be impossible or very difficult. With the invention of a new x-ray diffraction measurement method here, growth of cubic semiconductors on trigonal crystals became possible. This epitaxy and lattice-matching condition can be applied not only to SiGe (111)/sapphire (0001) substrate relations, but also to other crystal structures and other materials, including similar crystal structures which have pointgroup rotational symmetries by 120 because the cubic (111) direction has 120 rotational symmetry. The use of slightly miscut (less than

  12. Thermoelectric Performance Enhancement by Surrounding Crystalline Semiconductors with Metallic Nanoparticles

    Science.gov (United States)

    Kim, Hyun-Jung; King, Glen C.; Park, Yeonjoon; Lee, Kunik; Choi, Sang H.

    2011-01-01

    Direct conversion of thermal energy to electricity by thermoelectric (TE) devices may play a key role in future energy production and utilization. However, relatively poor performance of current TE materials has slowed development of new energy conversion applications. Recent reports have shown that the dimensionless Figure of Merit, ZT, for TE devices can be increased beyond the state-of-the-art level by nanoscale structuring of materials to reduce their thermal conductivity. New morphologically designed TE materials have been fabricated at the NASA Langley Research Center, and their characterization is underway. These newly designed materials are based on semiconductor crystal grains whose surfaces are surrounded by metallic nanoparticles. The nanoscale particles are used to tailor the thermal and electrical conduction properties for TE applications by altering the phonon and electron transport pathways. A sample of bismuth telluride decorated with metallic nanoparticles showed less thermal conductivity and twice the electrical conductivity at room temperature as compared to pure Bi2Te3. Apparently, electrons cross easily between semiconductor crystal grains via the intervening metallic nanoparticle bridges, but phonons are scattered at the interfacing gaps. Hence, if the interfacing gap is larger than the mean free path of the phonon, thermal energy transmission from one grain to others is reduced. Here we describe the design and analysis of these new materials that offer substantial improvements in thermoelectric performance.

  13. Liquid-crystalline ordering as a concept in materials science: from semiconductors to stimuli-responsive devices.

    Science.gov (United States)

    Fleischmann, Eva-Kristina; Zentel, Rudolf

    2013-08-19

    While the unique optical properties of liquid crystals (LCs) are already well exploited for flat-panel displays, their intrinsic ability to self-organize into ordered mesophases, which are intermediate states between crystal and liquid, gives rise to a broad variety of additional applications. The high degree of molecular order, the possibility for large scale orientation, and the structural motif of the aromatic subunits recommend liquid-crystalline materials as organic semiconductors, which are solvent-processable and can easily be deposited on a substrate. The anisotropy of liquid crystals can further cause a stimuli-responsive macroscopic shape change of cross-linked polymer networks, which act as reversibly contracting artificial muscles. After illustrating the concept of liquid-crystalline order in this Review, emphasis will be placed on synthetic strategies for novel classes of LC materials, and the design and fabrication of active devices.

  14. Organic Spin-Valves and Beyond: Spin Injection and Transport in Organic Semiconductors and the Effect of Interfacial Engineering.

    Science.gov (United States)

    Jang, Hyuk-Jae; Richter, Curt A

    2017-01-01

    Since the first observation of the spin-valve effect through organic semiconductors, efforts to realize novel spintronic technologies based on organic semiconductors have been rapidly growing. However, a complete understanding of spin-polarized carrier injection and transport in organic semiconductors is still lacking and under debate. For example, there is still no clear understanding of major spin-flip mechanisms in organic semiconductors and the role of hybrid metal-organic interfaces in spin injection. Recent findings suggest that organic single crystals can provide spin-transport media with much less structural disorder relative to organic thin films, thus reducing momentum scattering. Additionally, modification of the band energetics, morphology, and even spin magnetic moment at the metal-organic interface by interface engineering can greatly impact the efficiency of spin-polarized carrier injection. Here, progress on efficient spin-polarized carrier injection into organic semiconductors from ferromagnetic metals by using various interface engineering techniques is presented, such as inserting a metallic interlayer, a molecular self-assembled monolayer (SAM), and a ballistic carrier emitter. In addition, efforts to realize long spin transport in single-crystalline organic semiconductors are discussed. The focus here is on understanding and maximizing spin-polarized carrier injection and transport in organic semiconductors and insight is provided for the realization of emerging organic spintronics technologies.

  15. Method of doping organic semiconductors

    Science.gov (United States)

    Kloc, Christian Leo [Constance, DE; Ramirez, Arthur Penn [Summit, NJ; So, Woo-Young [New Providence, NJ

    2012-02-28

    A method includes the steps of forming a contiguous semiconducting region and heating the region. The semiconducting region includes polyaromatic molecules. The heating raises the semiconducting region to a temperature above room temperature. The heating is performed in the presence of a dopant gas and the absence of light to form a doped organic semiconducting region.

  16. Spectroscopy of organic semiconductors from first principles

    Science.gov (United States)

    Sharifzadeh, Sahar; Biller, Ariel; Kronik, Leeor; Neaton, Jeffery

    2011-03-01

    Advances in organic optoelectronic materials rely on an accurate understanding their spectroscopy, motivating the development of predictive theoretical methods that accurately describe the excited states of organic semiconductors. In this work, we use density functional theory and many-body perturbation theory (GW/BSE) to compute the electronic and optical properties of two well-studied organic semiconductors, pentacene and PTCDA. We carefully compare our calculations of the bulk density of states with available photoemission spectra, accounting for the role of finite temperature and surface effects in experiment, and examining the influence of our main approximations -- e.g. the GW starting point and the application of the generalized plasmon-pole model -- on the predicted electronic structure. Moreover, our predictions for the nature of the exciton and its binding energy are discussed and compared against optical absorption data. We acknowledge DOE, NSF, and BASF for financial support and NERSC for computational resources.

  17. Physics of organic semiconductors. 2. compl. new rev. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Bruetting, Wolfgang [Augsburg Univ. (Germany). Inst. fuer Physik; Adachi, Chihaya (eds.) [Kyushu Univ., Fukuoka (Japan). Center for Future Chemistry

    2012-07-01

    The field of organic electronics has seen a steady growth over the last 15 years. At the same time, our scientific understanding of how to achieve optimum device performance has grown, and this book gives an overview of our present-day knowledge of the physics behind organic semiconductor devices. Based on the very successful first edition, the editors have invited top scientists from the US, Japan, and Europe to include the developments from recent years, covering such fundamental issues as: - growth and characterization of thin films of organic semiconductors, - charge transport and photophysical properties of the materials as well as their electronic structure at interfaces, and - analysis and modeling of devices like organic light-emitting diodes or organic lasers. The result is an overview of the field for both readers with basic knowledge and for an application-oriented audience. It thus bridges the gap between textbook knowledge largely based on crystalline molecular solids and those books focusing more on device applications.

  18. Heteroarenes as high performance organic semiconductors.

    Science.gov (United States)

    Jiang, Wei; Li, Yan; Wang, Zhaohui

    2013-07-21

    The design, synthesis, and characterization of new organic semiconductors (OSCs) are important aspects for the development of next-generation optoelectronic devices. Structurally, organic semiconductors based on π-conjugated molecules can be easily modified via rational synthesis to tune multi-level self-assembled structures and discover novel chemical, optical, and electronic properties. Heteroarenes, which contain chalcogens and nitrogens in fused aromatic rings, are being developed as promising semiconducting materials for applications in a variety of electronic devices due to their outstanding optoelectronic properties. We highlight recent approaches toward realizing high performance p-channel field effect transistors based on linear heteroacenes and heteroatom annulated polycyclic aromatics (PAHs) as key functional components. These comprehensive, but carefully orchestrated approaches simultaneously address (i) practical synthesis, (ii) tunable self-assembled packing arrangement as well as (iii) high electronic performance.

  19. Conductive-AFM Patterning of Organic Semiconductors.

    Science.gov (United States)

    Brown, Benjamin P; Picco, Loren; Miles, Mervyn J; Faul, Charl F J

    2015-10-01

    Using a conductive atomic force microscope (c-AFM) redox-writing technique, it is shown that it is possible to locally, and reversibly, pattern conducting, and nonconducting features on the surface of a low molecular weight aniline-based organic (semi)-conductor thin film using a commercial c-AFM. It is shown that application of a voltage between the tip and sample causes localized redox reactions at the surface without damage.

  20. n-Channel semiconductor materials design for organic complementary circuits.

    Science.gov (United States)

    Usta, Hakan; Facchetti, Antonio; Marks, Tobin J

    2011-07-19

    Organic semiconductors have unique properties compared to traditional inorganic materials such as amorphous or crystalline silicon. Some important advantages include their adaptability to low-temperature processing on flexible substrates, low cost, amenability to high-speed fabrication, and tunable electronic properties. These features are essential for a variety of next-generation electronic products, including low-power flexible displays, inexpensive radio frequency identification (RFID) tags, and printable sensors, among many other applications. Accordingly, the preparation of new materials based on π-conjugated organic molecules or polymers has been a central scientific and technological research focus over the past decade. Currently, p-channel (hole-transporting) materials are the leading class of organic semiconductors. In contrast, high-performance n-channel (electron-transporting) semiconductors are relatively rare, but they are of great significance for the development of plastic electronic devices such as organic field-effect transistors (OFETs). In this Account, we highlight the advances our team has made toward realizing moderately and highly electron-deficient n-channel oligomers and polymers based on oligothiophene, arylenediimide, and (bis)indenofluorene skeletons. We have synthesized and characterized a "library" of structurally related semiconductors, and we have investigated detailed structure-property relationships through optical, electrochemical, thermal, microstructural (both single-crystal and thin-film), and electrical measurements. Our results reveal highly informative correlations between structural parameters at various length scales and charge transport properties. We first discuss oligothiophenes functionalized with perfluoroalkyl and perfluoroarene substituents, which represent the initial examples of high-performance n-channel semiconductors developed in this project. The OFET characteristics of these compounds are presented with an

  1. Designing solution-processable air-stable liquid crystalline crosslinkable semiconductors

    DEFF Research Database (Denmark)

    McCulloch, I.; Bailey, C.; Genevicius, K.

    2006-01-01

    organic light emitting diode displays, low frequency radio frequency identification tag and other low performance electronics. Organic semiconductors that offer both electrical performance and stability with respect to storage and operation under ambient conditions are required. This work describes......-of-flight and field effect transistor devices were prepared and their electrical characterization reported....

  2. Liquid crystalline composites toward organic photovoltaic application (Conference Presentation)

    Science.gov (United States)

    Shimizu, Yo; Sosa-Vargas, Lydia; Shin, Woong; Higuchi, Yumi; Itani, Hiromichi; Kawano, Koki; Dao, Quang Duy; Fujii, Akihiko; Ozaki, Masanori

    2017-02-01

    Liquid crystalline semiconductor is an interesting category of organic electronic materials and also has been extensively studied in terms of "Printed Electronics". For the wider diversity in research toward new applications, one can consider how to use a combination of miscibility and phase separation in liquid crystals. Here we report discotic liquid crystals in making a composite of which structural order is controlled in nano-scale toward photovoltaic applications. Discotic columnar LCs were studied on their resultant molecular order and carrier transport properties. Liquid crystals of phthalocyanine and its analogues which exhibit columnar mesomorphism with high carrier mobility (10-1 cm2/Vs) were examined with making binary phase diagrams and the correlation to carrier transport properties by TOF measurements was discussed. The shape-analogues in chemical structure shows a good miscibility even for the different lattice-type of columnar arrangement and the carrier mobility is mostly decrease except for a case of combination with a metal-free and the metal complex. For the mixtures with non-mesogenic C60 derivatives, one sees a phase-separated structure due to its immiscibility, though the columnar order is remained in a range of component ratio.Especially, in a range of the ratio, it was observed the phase separated C60 derivatives are fused into the matrix of columnar bundles, indicating C60 derivatives could be diffused in columnar arrays in molecular level.

  3. Halopentacenes: Promising Candidates for Organic Semiconductors

    Institute of Scientific and Technical Information of China (English)

    DU Gong-He; REN Zhao-Yu; GUO Ping; ZHENG Ji-Ming

    2009-01-01

    We introduce polar substituents such as F, Cl, Br into pentacene to enhance the dissolubility in common organic solvents while retaining the high charge-carrier mobilities of pentacene. Geometric structures, dipole moments,frontier molecule orbits, ionization potentials and electron affinities, as well as reorganization energies of those molecules, and of pentacene for comparison, are successively calculated by density functional theory. The results indicate that halopentacenes have rather small reorganization energies (< 0.2 eV), and when the substituents are in position 2 or positions 2 and 9, they are polarity molecules. Thus we conjecture that they can easily be dissolved in common organic solvents, and are promising candidates for organic semiconductors.

  4. All-electronic line width reduction in a semiconductor diode laser using a crystalline microresonator

    Science.gov (United States)

    Rury, Aaron S.; Mansour, Kamjou; Yu, Nan

    2015-07-01

    This study examines the capability to significantly suppress the frequency noise of a semiconductor distributed feedback diode laser using a universally applicable approach: a combination of a high-Q crystalline whispering gallery mode microresonator reference and the Pound-Drever-Hall locking scheme using an all-electronic servo loop. An out-of-loop delayed self-heterodyne measurement system demonstrates the ability of this approach to reduce a test laser's absolute line width by nearly a factor of 100. In addition, in-loop characterization of the laser stabilized using this method demonstrates a 1-kHz residual line width with reference to the resonator frequency. Based on these results, we propose that utilization of an all-electronic loop combined with the use of the wide transparency window of crystalline materials enable this approach to be readily applicable to diode lasers emitting in other regions of the electromagnetic spectrum, especially in the UV and mid-IR.

  5. Organic single crystals or crystalline micro/nanostructures: Preparation and field-effect transistor applications

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Organic single crystals hold great promise for the development of organic semiconductor materials,because they could reveal the intrinsic electronic properties of these materials,providing high-performance electronic devices and probing the structureproperty relationships.This article reviews the preparation methods for organic single crystals or crystalline micro/nanostructures,including vapor phase growth methods and solution-processed methods,and summarizes a few methods employed in the fabrication of field-effect transistors along with dozens of examples concerning both small molecules and polymers with high field-effect performance.

  6. Organic semiconductors as candidates for advanced optoelectronic devices:

    OpenAIRE

    Bratina, Gvido; Hudej, Robert

    2001-01-01

    Organic semiconductors are gaining an increasing attention due to their promise of novel optoelectronic devices. The main attraction of these materials stems from their potential integration with flexible materials, which would result in ultrathin flexible multicolor displays. Basic electronic properties of typical representatives of organic semiconductors are reviewed. The operation of a light-emitting device based on organic semiconductors is fundamentally different from its inorganic count...

  7. Blue emitting organic semiconductors under high pressure

    DEFF Research Database (Denmark)

    Knaapila, Matti; Guha, Suchismita

    2016-01-01

    This review describes essential optical and emerging structural experiments that use high GPa range hydrostatic pressure to probe physical phenomena in blue-emitting organic semiconductors including π-conjugated polyfluorene and related compounds. The work emphasizes molecular structure...... and intermolecular self-organization that typically determine transport and optical emission in π-conjugated oligomers and polymers. In this context, hydrostatic pressure through diamond anvil cells has proven to be an elegant tool to control structure and interactions without chemical intervention. This has been...... and intermolecular interactions on optical excitations, electron–phonon interaction, and changes in backbone conformations. This picture is connected to the optical high pressure studies of other π-conjugated systems and emerging x-ray scattering experiments from polyfluorenes which provides a structure-property map...

  8. Semiconductor gel in shark sense organs?

    Science.gov (United States)

    Fields, R Douglas; Fields, Kyle D; Fields, Melanie C

    2007-10-22

    Sharks can sense bioelectric fields of prey and other animals in seawater using an extraordinary system of sense organs (ampullae of Lorenzini) [R.D. Fields, The shark's electric sense. Sci. Am. 297 (2007) 74-81]. A recent study reported that these sense organs also enable sharks to locate prey-rich thermal fronts using a novel mode of temperature reception without ion channels. The study reported that gel extracted from the organs operates as a thermoelectric semiconductor, generating electricity when it is heated or cooled [B.R. Brown, Neurophysiology: sensing temperature without ion channels, Nature 421 (2003) 495]. Here we report biophysical studies that call into question this mechanism of sensory transduction. Our experiments indicate that the material exhibits no unusual thermoelectric or electromechanical properties, and that the thermoelectric response is an artifact caused by temperature effects on the measurement electrodes. No response is seen when non-metallic electrodes (carbon or salt bridges) are used, and ordinary seawater produces the same effect as shark organ gel when silver wire electrodes are used. These data are consistent with the voltages arising from electrochemical electrode potentials rather generated intrinsically within the sample. This new evidence, together with the anatomy of the organs and behavioral studies in the literature, best support the conclusion that the biological function of these sense organs is to detect electric fields.

  9. Charged particle detection in organic semiconductors

    CERN Document Server

    Beckerle, P

    2000-01-01

    Polyacetylene is an organic semiconductor in which charges can be set free by a traversing charged particle, transported by an electric field to read-out electrodes and, subsequently, amplified and recorded in a way similar to what happens in a silicon-drift detector. In an experimental investigation of the features of this charge transport in thin foils we find drift velocities of the order of 40 cm/s. Stretching of the foils by a factor of three to four increases the drift velocity by a factor of ten and introduces a strong directionality of the charge transport. The detection efficiency of 5 MeV alpha particles in a few micron thin stretched foil is around 70%.

  10. Benzodicarbomethoxytetrathiafulvalene derivatives as soluble organic semiconductors.

    Science.gov (United States)

    Otón, Francisco; Pfattner, Raphael; Oxtoby, Neil S; Mas-Torrent, Marta; Wurst, Klaus; Fontrodona, Xavier; Olivier, Yoann; Cornil, Jérôme; Veciana, Jaume; Rovira, Concepció

    2011-01-07

    A series of new tetrathiafulvalene (TTF) derivatives bearing dimethoxycarbonyl and phenyl or phthalimidyl groups fused to the TTF core (6 and 15-18) has been synthesized as potential soluble semiconductor materials for organic field-effect transistors (OFETs). The electron-withdrawing substituents lower the energy of the HOMO and LUMO levels and increase the solubility and stability of the semiconducting material. Crystal structures of all new TTF derivatives are also described, and theoretical DFT calculations were carried out to study the potential of the crystals to be used in OFET. In the experimental study, the best performing device exhibited a hole mobility up to 7.5 × 10(-3) cm(2) V(-1) s(-1)).

  11. PHOTOOXIDATION OF ORGANIC WASTES USING SEMICONDUCTOR NANOCLUSTERS

    Energy Technology Data Exchange (ETDEWEB)

    Wilcoxon, Jess P.

    2000-12-31

    It would be a major boon to have a visible light absorbing semiconductor catalytic material available, which is also photostable and non-toxic. Such a photocatalyst would make it possible to exploit sunlight as the sole energy source required for detoxification. To this end we have employed our expertise in nanocluster synthesis and processing to make and purify nanoparticles of MoS2. The band-gap and absorbance edges of these nanoparticles can be adjusted by particle size based upon the quantum confinement of the electron-hole pair. In a recent paper we demonstrated the use of these new photocatalysts to destroy phenol, and demonstrated a strong effect of size or band-gap on the rate of photo-oxidation.5 In this research we investigate the photooxidation kinetics and products formed for a standard material, Degussa P-25 TiO2, as compared to nanosize TiO2, SnO2, and MoS2. We examined the light intensity dependence for nanosize SnO2 compared to TiO2 (Degussa), and the effect o f size on photooxidation kinetics for both SnO2 and MoS2. We studied photooxidation in aqueous systems and, for the first time, a system consisting almost entirely of a polar organic, acetonitrile. Our primary objective was to develop an entirely new class of material: nanosize semiconductors with visible bandgaps and to engineer these material's properties to allow us to photooxidize toxic organic compounds in water on a reasonable time scale ({approx}8 hrs). A second objective was to study how certain material properties such as size, surface treatment, and material type affect the efficiency of the photocatalytic process as well as optimizing these features.

  12. Intrinsic charge trapping in organic and polymeric semiconductors: a physical chemistry perspective

    Energy Technology Data Exchange (ETDEWEB)

    Kaake, Loren [Univ. of Texas, Austin, TX (United States); Barbara, Paul F. [Univ. of Texas, Austin, TX (United States); Zhu, Xiaoyang [Univ. of Texas, Austin, TX (United States)

    2010-01-12

    We aim to understand the origins of intrinsic charge carrier traps in organic and polymeric semiconductor materials from a physical chemistry perspective. In crystalline organic semiconductors, we point out some of the inadequacies in the description of intrinsic charge traps using language and concepts developed for inorganic semiconductors. In π-conjugated polymeric semiconductors, we suggest the presence of a two-tier electronic energy landscape, a bimodal majority landscape due to two dominant structural motifs and a minority electronic energy landscape from intrinsic charged defects. The bimodal majority electronic energy landscape results from a combination of amorphous domains and microcrystalline or liquid-crystalline domains. The minority tier of the electronic density of states is comprised of deep Coulomb traps embedded in the majority electronic energy landscape. This minority electronic energy landscape may dominate transport properties at low charge carrier densities, such as those expected for organic photovoltaic devices, while the bimodal majority electronic energy landscape becomes significant at high carrier densities, that is, in organic field effect transistors.

  13. Charge transport in nanoscale lateral and vertical organic semiconductor devices

    NARCIS (Netherlands)

    Xu, Bojian

    2017-01-01

    Organic semiconductors have been drawing more and more attention due to their huge potential for low-cost, flexible, printable electronics and spintronics. In this thesis research, we have investigated charge transport in two organic semiconductors, DXP and P3HT, in different device configurations.

  14. Charge transport in amorphous organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Lukyanov, Alexander

    2011-03-15

    Organic semiconductors with the unique combination of electronic and mechanical properties may offer cost-effective ways of realizing many electronic applications, e. g. large-area flexible displays, printed integrated circuits and plastic solar cells. In order to facilitate the rational compound design of organic semiconductors, it is essential to understand relevant physical properties e. g. charge transport. This, however, is not straightforward, since physical models operating on different time and length scales need to be combined. First, the material morphology has to be known at an atomistic scale. For this atomistic molecular dynamics simulations can be employed, provided that an atomistic force field is available. Otherwise it has to be developed based on the existing force fields and first principle calculations. However, atomistic simulations are typically limited to the nanometer length- and nanosecond time-scales. To overcome these limitations, systematic coarse-graining techniques can be used. In the first part of this thesis, it is demonstrated how a force field can be parameterized for a typical organic molecule. Then different coarse-graining approaches are introduced together with the analysis of their advantages and problems. When atomistic morphology is available, charge transport can be studied by combining the high-temperature Marcus theory with kinetic Monte Carlo simulations. The approach is applied to the hole transport in amorphous films of tris(8- hydroxyquinoline)aluminium (Alq{sub 3}). First the influence of the force field parameters and the corresponding morphological changes on charge transport is studied. It is shown that the energetic disorder plays an important role for amorphous Alq{sub 3}, defining charge carrier dynamics. Its spatial correlations govern the Poole-Frenkel behavior of the charge carrier mobility. It is found that hole transport is dispersive for system sizes accessible to simulations, meaning that calculated

  15. Charge-transport simulations in organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    May, Falk

    2012-07-06

    In this thesis we have extended the methods for microscopic charge-transport simulations for organic semiconductors, where weak intermolecular interactions lead to spatially localized charge carriers, and the charge transport occurs as an activated hopping process between diabatic states. In addition to weak electronic couplings between these states, different electrostatic environments in the organic material lead to a broadening of the density of states for the charge energies which limits carrier mobilities. The contributions to the method development include (i) the derivation of a bimolecular charge-transfer rate, (ii) the efficient evaluation of intermolecular (outer-sphere) reorganization energies, (iii) the investigation of effects of conformational disorder on intramolecular reorganization energies or internal site energies and (iv) the inclusion of self-consistent polarization interactions for calculation of charge energies. These methods were applied to study charge transport in amorphous phases of small molecules used in the emission layer of organic light emitting diodes (OLED). When bulky substituents are attached to an aromatic core in order to adjust energy levels or prevent crystallization, a small amount of delocalization of the frontier orbital to the substituents can increase electronic couplings between neighboring molecules. This leads to improved charge-transfer rates and, hence, larger charge-mobility. We therefore suggest using the mesomeric effect (as opposed to the inductive effect) when attaching substituents to aromatic cores, which is necessary for example in deep blue OLEDs, where the energy levels of a host molecule have to be adjusted to those of the emitter. Furthermore, the energy landscape for charges in an amorphous phase cannot be predicted by mesoscopic models because they approximate the realistic morphology by a lattice and represent molecular charge distributions in a multipole expansion. The microscopic approach shows that

  16. Developing high mobility emissive organic semiconductors towards integrated optoelectronic devices (Conference Presentation)

    Science.gov (United States)

    Dong, Huanli; Hu, Wenping; Heeger, Alan J.

    2016-09-01

    The achievement of organic semiconductors with both high mobility and strong fluorescence emission remains a challenge. High mobility requires molecules which pack densely and periodically, while serious fluorescence quenching typically occurs when fluorescent materials begin to aggregate (aggregation-induced quenching (AIQ)). Indeed, classical materials with strong fluorescent emission always exhibit low mobility, for example, tris(8-hydroxyquinoline) aluminium (ALQ) and phenylenevinylene-based polymers with mobility only 10-6-10-5 cm2V-1s-1, and benchmark organic semiconductors with high mobility demonstrate very weak emission, for example, rubrene exhibits a quantum yield 1% in crystalline state and pentacene shows very weak fluorescence in the solid state. However, organic semiconductors with high mobility and strong fluorescence are necessary for the achievement of high efficiency organic light-emitting transistors (OLETs) and electrically pumped organic lasers. Therefore, it is necessary for developing high mobility emissive organic/polymeric semiconductors towards a fast mover for the organic optoelectronic integrated devices and circuits.

  17. Evolutionary process development towards next generation crystalline silicon solar cells : a semiconductor process toolbox application

    Science.gov (United States)

    John, J.; Prajapati, V.; Vermang, B.; Lorenz, A.; Allebe, C.; Rothschild, A.; Tous, L.; Uruena, A.; Baert, K.; Poortmans, J.

    2012-08-01

    Bulk crystalline Silicon solar cells are covering more than 85% of the world's roof top module installation in 2010. With a growth rate of over 30% in the last 10 years this technology remains the working horse of solar cell industry. The full Aluminum back-side field (Al BSF) technology has been developed in the 90's and provides a production learning curve on module price of constant 20% in average. The main reason for the decrease of module prices with increasing production capacity is due to the effect of up scaling industrial production. For further decreasing of the price per wattpeak silicon consumption has to be reduced and efficiency has to be improved. In this paper we describe a successive efficiency improving process development starting from the existing full Al BSF cell concept. We propose an evolutionary development includes all parts of the solar cell process: optical enhancement (texturing, polishing, anti-reflection coating), junction formation and contacting. Novel processes are benchmarked on industrial like baseline flows using high-efficiency cell concepts like i-PERC (Passivated Emitter and Rear Cell). While the full Al BSF crystalline silicon solar cell technology provides efficiencies of up to 18% (on cz-Si) in production, we are achieving up to 19.4% conversion efficiency for industrial fabricated, large area solar cells with copper based front side metallization and local Al BSF applying the semiconductor toolbox.

  18. New Organic Semiconductor Materials Applied in Organic Photovoltaic and Optical Devices

    National Research Council Canada - National Science Library

    Andre F. S. Guedes; Vilmar P. Guedes; Simone Tartari; Mônica L. Souza; Idaulo J. Cunha

    2015-01-01

    The development of flexible organic photovoltaic solar cells, using an optically transparent substrate material and organic semiconductor materials, has been widely utilized by the electronic industry...

  19. Organic modification of metal / semiconductor Schottky contacts

    Energy Technology Data Exchange (ETDEWEB)

    Mendez Pinzon, H.A.

    2006-07-10

    In the present work a Metal / organic / inorganic semiconductor hybrid heterostructure (Ag / DiMe-PTCDI / GaAs) was built under UHV conditions and characterised in situ. The aim was to investigate the influence of the organic layer in the surface properties of GaAs(100) and in the electrical response of organic-modified Ag / GaAs Schottky diodes. The device was tested by combining surface-sensitive techniques (Photoemission spectroscopy and NEXAFS) with electrical measurements (current-voltage, capacitance-voltage, impedance and charge transient spectroscopies). Core level examination by PES confirms removal of native oxide layers on sulphur passivated (S-GaAs) and hydrogen plasma treated GaAs(100) (H+GaAs) surfaces. Additional deposition of ultrathin layers of DiMe-PTCDI may lead to a reduction of the surface defects density and thereby to an improvement of the electronic properties of GaAs. The energy level alignment through the heterostructure was deduced by combining UPS and I-V measurements. This allows fitting of the I-V characteristics with electron as majority carriers injected over a barrier by thermionic emission as a primary event. For thin organic layers (below 8 nm thickness) several techniques (UPS, I-V, C-V, QTS and AFM) show non homogeneous layer growth, leading to formation of voids. The coverage of the H+GaAs substrate as a function of the nominal thickness of DiMe-PTCDI was assessed via C-V measurements assuming a voltage independent capacitance of the organic layer. The frequency response of the device was evaluated through C-V and impedance measurements in the range 1 kHz-1 MHz. The almost independent behaviour of the capacitance in the measured frequency range confirmed the assumption of a near geometrical capacitor, which was used for modelling the impedance with an equivalent circuit of seven components. From there it was found a predominance of the space charge region impedance, so that A.C. conduction can only takes place through the

  20. Charge carrier coherence and Hall effect in organic semiconductors.

    Science.gov (United States)

    Yi, H T; Gartstein, Y N; Podzorov, V

    2016-03-30

    Hall effect measurements are important for elucidating the fundamental charge transport mechanisms and intrinsic mobility in organic semiconductors. However, Hall effect studies frequently reveal an unconventional behavior that cannot be readily explained with the simple band-semiconductor Hall effect model. Here, we develop an analytical model of Hall effect in organic field-effect transistors in a regime of coexisting band and hopping carriers. The model, which is supported by the experiments, is based on a partial Hall voltage compensation effect, occurring because hopping carriers respond to the transverse Hall electric field and drift in the direction opposite to the Lorentz force acting on band carriers. We show that this can lead in particular to an underdeveloped Hall effect observed in organic semiconductors with substantial off-diagonal thermal disorder. Our model captures the main features of Hall effect in a variety of organic semiconductors and provides an analytical description of Hall mobility, carrier density and carrier coherence factor.

  1. Hybrid organic semiconductor lasers for bio-molecular sensing.

    Science.gov (United States)

    Haughey, Anne-Marie; Foucher, Caroline; Guilhabert, Benoit; Kanibolotsky, Alexander L; Skabara, Peter J; Burley, Glenn; Dawson, Martin D; Laurand, Nicolas

    2014-01-01

    Bio-functionalised luminescent organic semiconductors are attractive for biophotonics because they can act as efficient laser materials while simultaneously interacting with molecules. In this paper, we present and discuss a laser biosensor platform that utilises a gain layer made of such an organic semiconductor material. The simple structure of the sensor and its operation principle are described. Nanolayer detection is shown experimentally and analysed theoretically in order to assess the potential and the limits of the biosensor. The advantage conferred by the organic semiconductor is explained, and comparisons to laser sensors using alternative dye-doped materials are made. Specific biomolecular sensing is demonstrated, and routes to functionalisation with nucleic acid probes, and future developments opened up by this achievement, are highlighted. Finally, attractive formats for sensing applications are mentioned, as well as colloidal quantum dots, which in the future could be used in conjunction with organic semiconductors.

  2. Intrinsic and extrinsic parameters for controlling the growth of organic single-crystalline nanopillars in photovoltaics.

    Science.gov (United States)

    Zhang, Yue; Diao, Ying; Lee, Hyunbok; Mirabito, Timothy J; Johnson, Richard W; Puodziukynaite, Egle; John, Jacob; Carter, Kenneth R; Emrick, Todd; Mannsfeld, Stefan C B; Briseno, Alejandro L

    2014-10-08

    The most efficient architecture for achieving high donor/acceptor interfacial area in organic photovoltaics (OPVs) would employ arrays of vertically interdigitated p- and n- type semiconductor nanopillars (NPs). Such morphology could have an advantage in bulk heterojunction systems; however, precise control of the dimension morphology in a crystalline, interpenetrating architecture has not yet been realized. Here we present a simple, yet facile, crystallization technique for the growth of vertically oriented NPs utilizing a modified thermal evaporation technique that hinges on a fast deposition rate, short substrate-source distance, and ballistic mass transport. A broad range of organic semiconductor materials is beneficial from the technique to generate NP geometries. Moreover, this technique can also be generalized to various substrates, namely, graphene, PEDOT-PSS, ZnO, CuI, MoO3, and MoS2. The advantage of the NP architecture over the conventional thin film counterpart is demonstrated with an increase of power conversion efficiency of 32% in photovoltaics. This technique will advance the knowledge of organic semiconductor crystallization and create opportunities for the fabrication and processing of NPs for applications that include solar cells, charge storage devices, sensors, and vertical transistors.

  3. Contorted Organic Semiconductors for Molecular Electronics

    Science.gov (United States)

    Zhong, Yu

    Chapter 4, I discuss helical molecular semiconductors as electron acceptors that are on par with fullerene derivatives in efficient solar cells. We achieved an 8.3% power conversion efficiency in a solar cell, which is a record high for non-fullerene bulk heterojunctions. Femtosecond transient absorption spectroscopy revealed both electron and hole transfer processes at the donor-acceptor interfaces. Atomic force microscopy reveals a mesh-like network of acceptors with pores that are tens of nanometers in diameter for efficient exciton separation and charge transport. This study describes a new motif for designing highly efficient acceptors for organic solar cells. In Chapter 5, I compare analogous cyclic and acyclic pi-conjugated molecules as n-type electronic materials and find that the cyclic molecules have numerous benefits in organic photovoltaics. We designed two conjugated cycles for this study. Each comprises four subunits; one combines four electron-accepting, redox-active, diphenyl-perylenediimide subunits, and the other alternates two electron-donating bithiophene units with two diphenyl-perylenediimide units. We compare the macrocycles to acyclic versions of these molecules and find that, relative to the acyclic analogs, the conjugated macrocycles have bathochromically shifted UV-vis absorbances and are more easily reduced. In blended films, macrocycle-based devices show higher electron mobility and good morphology. All of these factors contribute to the more than doubling of the power conversion efficiency observed in organic photovoltaic devices with these macrocycles as the n-type, electron transporting material. This study highlights the importance of geometric design in creating new molecular semiconductors. In Chapter 6, I describe a new molecular design that enables high performance organic photodetectors. We use a rigid, conjugated macrocycle as the electron acceptor in devices to obtain high photocurrent and low dark current. We directly compare the

  4. Crystallinity dependent thermal degradation in organic solar cell

    Science.gov (United States)

    Lee, Hyunho; Sohn, Jiho; Tyagi, Priyanka; Lee, Changhee

    2017-01-01

    An operating solar cell undergoes solar heating; thus, the degradation study of organic photo-voltaic (OPV) with a thermal stress is required for their practical applications. We present a thermal degradation study on OPVs fabricated with photo-active polymers having different crystalline phase. Light intensity dependent analysis for different thermal stress duration is performed. In crystalline, the degradation majorly occurs due to drop in open-circuit voltage while in amorphous one it is due to drop in short-circuit current. Physical mechanism in both systems is explained and supported by the X-ray diffraction, morphological and optical characterization.

  5. Synchrotron radiation studies of inorganic-organic semiconductor interfaces

    CERN Document Server

    Evans, D A; Vearey-Roberts, A R; Bushell, A; Cabailh, G; O'Brien, S; Wells, J W; McGovern, I T; Dhanak, V R; Kampen, T U; Zahn, D R T; Batchelor, D

    2003-01-01

    Organic semiconductors (polymers and small molecules) are widely used in electronic and optoelectronic technologies. Many devices are based on multilayer structures where interfaces play a central role in device performance and where inorganic semiconductor models are inadequate. Synchrotron radiation techniques such as photoelectron spectroscopy (PES), near-edge X-ray absorption fine structure (NEXAFS) and X-ray standing wave spectroscopy (XSW) provide a powerful means of probing the structural, electronic and chemical properties of these interfaces. The surface-specificity of these techniques allows key properties to be monitored as the heterostructure is fabricated. This methodology has been directed at the growth of hybrid organic-inorganic semiconductor interfaces involving copper phthalocyanine as the model organic material and InSb and GaAs as the model inorganic semiconductor substrates. Core level PES has revealed that these interfaces are abrupt and chemically inert due to the weak bonding between t...

  6. A Single Crystalline Porphyrinic Titanium MetalOrganic Framework

    Science.gov (United States)

    2015-04-28

    organic frameworks ( MOFs ) are a promising class of highly ordered porous materials with potential applications in gas storage , catalysis, and...metal–organic framework ( MOF ), namely PCN-22. A preformed titanium-oxo carboxylate cluster is adopted as the starting material to judiciously control...the MOF growth process to afford single crystals. This synthetic method is useful to obtain highly crystalline titanium MOFs , which has been a

  7. Electrostatic phenomena in organic semiconductors: fundamentals and implications for photovoltaics.

    Science.gov (United States)

    D'Avino, Gabriele; Muccioli, Luca; Castet, Frédéric; Poelking, Carl; Andrienko, Denis; Soos, Zoltán G; Cornil, Jérôme; Beljonne, David

    2016-11-01

    This review summarizes the current understanding of electrostatic phenomena in ordered and disordered organic semiconductors, outlines numerical schemes developed for quantitative evaluation of electrostatic and induction contributions to ionization potentials and electron affinities of organic molecules in a solid state, and illustrates two applications of these techniques: interpretation of photoelectron spectroscopy of thin films and energetics of heterointerfaces in organic solar cells.

  8. Electrostatic phenomena in organic semiconductors: fundamentals and implications for photovoltaics

    Science.gov (United States)

    D'Avino, Gabriele; Muccioli, Luca; Castet, Frédéric; Poelking, Carl; Andrienko, Denis; Soos, Zoltán G.; Cornil, Jérôme; Beljonne, David

    2016-11-01

    This review summarizes the current understanding of electrostatic phenomena in ordered and disordered organic semiconductors, outlines numerical schemes developed for quantitative evaluation of electrostatic and induction contributions to ionization potentials and electron affinities of organic molecules in a solid state, and illustrates two applications of these techniques: interpretation of photoelectron spectroscopy of thin films and energetics of heterointerfaces in organic solar cells.

  9. Ultrafast dynamics and laser action of organic semiconductors

    CERN Document Server

    Vardeny, Zeev Valy

    2009-01-01

    Spurred on by extensive research in recent years, organic semiconductors are now used in an array of areas, such as organic light emitting diodes (OLEDs), photovoltaics, and other optoelectronics. In all of these novel applications, the photoexcitations in organic semiconductors play a vital role. Exploring the early stages of photoexcitations that follow photon absorption, Ultrafast Dynamics and Laser Action of Organic Semiconductors presents the latest research investigations on photoexcitation ultrafast dynamics and laser action in pi-conjugated polymer films, solutions, and microcavities.In the first few chapters, the book examines the interplay of charge (polarons) and neutral (excitons) photoexcitations in pi-conjugated polymers, oligomers, and molecular crystals in the time domain of 100 fs-2 ns. Summarizing the state of the art in lasing, the final chapters introduce the phenomenon of laser action in organics and cover the latest optoelectronic applications that use lasing based on a variety of caviti...

  10. Organic analogues of diluted magnetic semiconductors: bridging quantum chemistry to condensed matter physics

    Science.gov (United States)

    Furis, Madalina; Rawat, Naveen; Cherian, Judy G.; Wetherby, Anthony; Waterman, Rory; McGill, Stephen

    2015-09-01

    The selective coupling between polarized photons and electronic states in materials enables polarization-resolved spectroscopy studies of exchange interactions, spin dynamics, and collective magnetic behavior of conduction electrons in semiconductors. Here we report on Magnetic Circular Dichroism (MCD) studies of magnetic properties of electrons in crystalline thin films of small molecule organic semiconductors. Specifically, the focus was on the magnetic exchange interaction properties of d-shell ions (Cu2+, Co2+ and Mn2+) metal phthalocyanine (Pc) thin films that one may think of as organic analogues of diluted magnetic semiconductors (DMS). These films were deposited in-house using a recently developed pen-writing method that results in crystalline films with macroscopic long range ordering and improved electronic properties, ideally suited for spectroscopy techniques. Our experiments reveal that, in analogy to DMS, the extended π-orbitals of the Pc molecule mediate the spin exchange between highly localized d-like unpaired spins. We established that exchange mechanisms involve different electronic states in each species and/or hybridization between d-like orbitals and certain delocalized π-orbitals. Unprecedented 25T MCD and PL conducted in the unique 25T Split Florida HELIX magnet at the National High Magnetic Field Laboratory (NHMFL) will prove useful in probing these exchange interactions.

  11. Semiconductor Metal-Organic Frameworks: Future Low-Bandgap Materials.

    Science.gov (United States)

    Usman, Muhammad; Mendiratta, Shruti; Lu, Kuang-Lieh

    2017-02-01

    Metal-organic frameworks (MOFs) with low density, high porosity, and easy tunability of functionality and structural properties, represent potential candidates for use as semiconductor materials. The rapid development of the semiconductor industry and the continuous miniaturization of feature sizes of integrated circuits toward the nanometer (nm) scale require novel semiconductor materials instead of traditional materials like silicon, germanium, and gallium arsenide etc. MOFs with advantageous properties of both the inorganic and the organic components promise to serve as the next generation of semiconductor materials for the microelectronics industry with the potential to be extremely stable, cheap, and mechanically flexible. Here, a perspective of recent research is provided, regarding the semiconducting properties of MOFs, bandgap studies, and their potential in microelectronic devices. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Carrier localization on surfaces of organic semiconductors gated with electrolytes.

    Science.gov (United States)

    Xia, Yu; Xie, Wei; Ruden, P Paul; Frisbie, C Daniel

    2010-07-16

    Organic semiconductor single crystals gated with electrolytes exhibit a pronounced maximum in channel conductance at hole densities >10(13)   cm(-2). The cause is a strong decrease in the hole mobility with increasing charge density, which is explained in terms of a percolation model that incorporates trapping of holes by ions at the semiconductor-electrolyte interface. In the case of rubrene crystals, the peak channel conductance occurs at hole densities near 3 × 10(13)  cm(-2). The magnitude of the effect will be large for semiconductors with low dielectric constants and narrow bandwidths, and thus is likely to be a general phenomenon in organic semiconductors gated with electrolytes.

  13. Organic Semiconductor-Containing Supramolecules: Effect of Small Molecule Crystallization and Molecular Packing

    KAUST Repository

    Rancatore, Benjamin J.

    2016-01-21

    © 2016 American Chemical Society. Small molecules (SMs) with unique optical or electronic properties provide an opportunity to incorporate functionality into block copolymer (BCP)-based supramolecules. However, the assembly of supramolecules based on these highly crystalline molecules differs from their less crystalline counterparts. Here, two families of organic semiconductor SMs are investigated, where the composition of the crystalline core, the location (side- vs end-functionalization) of the alkyl solubilizing groups, and the constitution (branched vs linear) of the alkyl groups are varied. With these SMs, we present a systematic study of how the phase behavior of the SMs affects the overall assembly of these organic semiconductor-based supramolecules. The incorporation of SMs has a large effect on the interfacial curvature, the supramolecular periodicity, and the overall supramolecular morphology. The crystal packing of the SM within the supramolecule does not necessarily lead to the assembly of the comb block within the BCP microdomains, as is normally observed for alkyl-containing supramolecules. An unusual lamellar morphology with a wavy interface between the microdomains is observed due to changes in the packing structure of the small molecule within BCP microdomains. Since the supramolecular approach is modular and small molecules can be readily switched out, present studies provide useful guidance toward access supramolecular assemblies over several length scales using optically active and semiconducting small molecules.

  14. Suppressing molecular vibrations in organic semiconductors by inducing strain.

    Science.gov (United States)

    Kubo, Takayoshi; Häusermann, Roger; Tsurumi, Junto; Soeda, Junshi; Okada, Yugo; Yamashita, Yu; Akamatsu, Norihisa; Shishido, Atsushi; Mitsui, Chikahiko; Okamoto, Toshihiro; Yanagisawa, Susumu; Matsui, Hiroyuki; Takeya, Jun

    2016-01-01

    Organic molecular semiconductors are solution processable, enabling the growth of large-area single-crystal semiconductors. Improving the performance of organic semiconductor devices by increasing the charge mobility is an ongoing quest, which calls for novel molecular and material design, and improved processing conditions. Here we show a method to increase the charge mobility in organic single-crystal field-effect transistors, by taking advantage of the inherent softness of organic semiconductors. We compress the crystal lattice uniaxially by bending the flexible devices, leading to an improved charge transport. The mobility increases from 9.7 to 16.5 cm(2) V(-1) s(-1) by 70% under 3% strain. In-depth analysis indicates that compressing the crystal structure directly restricts the vibration of the molecules, thus suppresses dynamic disorder, a unique mechanism in organic semiconductors. Since strain can be easily induced during the fabrication process, we expect our method to be exploited to build high-performance organic devices.

  15. Three-dimensional charge transport in organic semiconductor single crystals.

    Science.gov (United States)

    He, Tao; Zhang, Xiying; Jia, Jiong; Li, Yexin; Tao, Xutang

    2012-04-24

    Three-dimensional charge transport anisotropy in organic semiconductor single crystals - both plates and rods (above and below, respectively, in the figure) - is measured in well-performing organic field-effect transistors for the first time. The results provide an excellent model for molecular design and device preparation that leads to good performance.

  16. Optical studies of crystalline organic superconductors under extreme conditions

    CERN Document Server

    McDonald, R D

    2001-01-01

    the aim being to make an optical measurement of the pressure dependence of the charge carrier effective mass. Chapter 4 concentrates on the vibrational modes of kappa-(BEDT-TTF) sub 2 Cu(SCN) sub 2. This chapter reports the first Raman scattering experiments on an organic superconductor at high pressure. Comparison of the infrared reflectance and Raman scattering measurements are used to elucidate the role of electron-phonon coupling in this material's superconductivity. Chapter 5 reports the first non-resonant measurements of the GHz conductivity of an organic molecular superconductor. These experiments probe the unconventional metallic properties of an organic superconductor during the onset of superconductivity. This thesis reports experiments which involve the interaction of light and matter to probe the properties of crystalline organic superconductors. The organic superconductors of the BEDT-TTF family are prototypical correlated electron systems; their low-temperature ground states are dominated by man...

  17. Synthesis and characterization of a new organic semiconductor material

    Energy Technology Data Exchange (ETDEWEB)

    Tiffour, Imane [Laboratoire de Génie Physique, Département de Physique, Université de Tiaret, Tiaret 14000 (Algeria); Faculté des Sciences et Technologies, Université Mustapha Stambouli, Mascara 29000 (Algeria); Dehbi, Abdelkader [Laboratoire de Génie Physique, Département de Physique, Université de Tiaret, Tiaret 14000 (Algeria); Mourad, Abdel-Hamid I., E-mail: ahmourad@uaeu.ac.ae [Mechanical Engineering Department, Faculty of Engineering, United Arab Emirates University, Al-Ain, P.O. Box 15551 (United Arab Emirates); Belfedal, Abdelkader [Faculté des Sciences et Technologies, Université Mustapha Stambouli, Mascara 29000 (Algeria); LPCMME, Département de Physique, Université d' Oran Es-sénia, 3100 Oran (Algeria)

    2016-08-01

    The objective of this study is to create an ideal mixture of Acetaminophen/Curcumin leading to a new and improved semiconductor material, by a study of the electrical, thermal and optical properties. This new material will be compared with existing semiconductor technology to discuss its viability within the industry. The electrical properties were investigated using complex impedance spectroscopy and optical properties were studied by means of UV-Vis spectrophotometry. The electric conductivity σ, the dielectric constant ε{sub r}, the activation energy E{sub a}, the optical transmittance T and the gap energy E{sub g} have been investigated in order to characterize our organic material. The electrical conductivity of the material is approximately 10{sup −5} S/m at room temperature, increasing the temperature causes σ to increase exponentially to approximately 10{sup −4} S/m. The activation energy obtained for the material is equal to 0.49 ± 0.02 ev. The optical absorption spectra show that the investigating material has absorbance in the visible range with a maximum wavelength (λ{sub max}) 424 nm. From analysis, the absorption spectra it was found the optical band gap equal to 2.6 ± 0.02 eV and 2.46 ± 0.02 eV for the direct and indirect transition, respectively. In general, the study shows that the developed material has characteristics of organic semiconductor material that has a promising future in the field of organic electronics and their potential applications, e.g., photovoltaic cells. - Highlights: • Development of a new organic acetaminophen/Curcumin semiconductor material. • The developed material has characteristics of an organic semiconductor. • It has electrical conductivity comparable to available organic semiconductors. • It has high optical transmittance and low permittivity/dielectric constant.

  18. Modeling of Spatially Correlated Energetic Disorder in Organic Semiconductors.

    Science.gov (United States)

    Kordt, Pascal; Andrienko, Denis

    2016-01-12

    Mesoscale modeling of organic semiconductors relies on solving an appropriately parametrized master equation. Essential ingredients of the parametrization are site energies (driving forces), which enter the charge transfer rate between pairs of neighboring molecules. Site energies are often Gaussian-distributed and are spatially correlated. Here, we propose an algorithm that generates these energies with a given Gaussian distribution and spatial correlation function. The method is tested on an amorphous organic semiconductor, DPBIC, illustrating that the accurate description of correlations is essential for the quantitative modeling of charge transport in amorphous mesophases.

  19. Organic semiconductor heterojunctions and its application in organic light-emitting diodes

    CERN Document Server

    Ma, Dongge

    2017-01-01

    This book systematically introduces the most important aspects of organic semiconductor heterojunctions, including the basic concepts and electrical properties. It comprehensively discusses the application of organic semiconductor heterojunctions as charge injectors and charge generation layers in organic light-emitting diodes (OLEDs). Semiconductor heterojunctions are the basis for constructing high-performance optoelectronic devices. In recent decades, organic semiconductors have been increasingly used to fabricate heterojunction devices, especially in OLEDs, and the subject has attracted a great deal of attention and evoked many new phenomena and interpretations in the field. This important application is based on the low dielectric constant of organic semiconductors and the weak non-covalent electronic interactions between them, which means that they easily form accumulation heterojunctions. As we know, the accumulation-type space charge region is highly conductive, which is an important property for high...

  20. Molecular and polymeric organic semiconductors for applications in photovoltaic devices

    CERN Document Server

    Meinhardt, G

    2000-01-01

    Photovoltaic devices based on molecular as well as polymeric semiconductors were investigated and characterized. The organic materials presented here exhibit the advantages of low price, low processing costs and the possibility of tuning their optical properties. The photovoltaic properties were investigated by photocurrent action spectroscopy and I/V-characterization and the electric field distribution in each layer by electroabsorption spectroscopy. Single layer devices of molecular semiconductors and semiconducting polymers like methyl-substituted polyparaphenylene, CN-Ether-PPV, copper-phthalocyanine, the terryleneimide DOTer, the perylene derivatives BBP-perylene and polyBBP-perylene show low photocurrents as well as a small photovoltaic effect in their pristine form. One way to enhance the performance is to blend the active layer with molecular dopands like a soluble form of titaniumoxophthalocyanine or the aromatic macromolecule RS19 or to combine two organic semiconductors in heterostructure devices. ...

  1. High Gain Hybrid Graphene-Organic Semiconductor Phototransistors

    NARCIS (Netherlands)

    Huisman, Everardus H.; Shulga, Artem G.; Zomer, Paul J.; Tombros, Nikolaos; Bartesaghi, Davide; Bisri, Satria Zulkarnaen; Loi, Maria A.; Koster, L. Jan Anton; van Wees, Bart J.

    2015-01-01

    Hybrid phototransistors of graphene and the organic semiconductor poly(3-hexylthiophene-2,5-diyl) (P3HT) are presented. Two types of phototransistors are demonstrated with a charge carrier transit time that differs by more than 6 orders of magnitude. High transit time devices are fabricated using a

  2. Trap-assisted recombination in disordered organic semiconductors

    NARCIS (Netherlands)

    Kuik, M.; Koster, L.J.A.; Wetzelaer, G.A.H.; Blom, P.W.M.

    2011-01-01

    The trap-assisted recombination of electrons and holes in organic semiconductors is investigated. The extracted capture coefficients of the trap-assisted recombination process are thermally activated with an identical activation energy as measured for the hole mobility μp. We demonstrate that the ra

  3. π-Conjugated Organic Semiconductors for Field-Effect Transistors

    Institute of Scientific and Technical Information of China (English)

    LIU Yun-qi

    2005-01-01

    @@ 1Results and Discussion Organic semiconductors employed as active layers in field-effect transistors (FETs) are of great current interest because such FETs can potentially be fabricated at low cost, over large areas, and on flexible substrates. Such facile fabrication approaches offer a significant advantage over silicon technology in numerous applications.

  4. Inkjet-Printed Organic Transistors Based on Organic Semiconductor/Insulating Polymer Blends

    Directory of Open Access Journals (Sweden)

    Yoon-Jung Kwon

    2016-08-01

    Full Text Available Recent advances in inkjet-printed organic field-effect transistors (OFETs based on organic semiconductor/insulating polymer blends are reviewed in this article. Organic semiconductor/insulating polymer blends are attractive ink candidates for enhancing the jetting properties, inducing uniform film morphologies, and/or controlling crystallization behaviors of organic semiconductors. Representative studies using soluble acene/insulating polymer blends as an inkjet-printed active layer in OFETs are introduced with special attention paid to the phase separation characteristics of such blended films. In addition, inkjet-printed semiconducting/insulating polymer blends for fabricating high performance printed OFETs are reviewed.

  5. Multiscale self-organization of the organic semiconductor alpha-quinquethiophene.

    Science.gov (United States)

    Melucci, Manuela; Gazzano, Massimo; Barbarella, Giovanna; Cavallini, Massimiliano; Biscarini, Fabio; Maccagnani, Piera; Ostoja, Paolo

    2003-08-27

    We show that thin films grown by vacuum sublimation, or formed by melted powders, of semiconductor alpha-quinquethiophene (T5) exhibit a hierarchical self-affinity organization that spans scales from tens of nanometers to hundreds of micrometers. T5 organization was investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), and optical microscopy. XRD showed that vacuum-evaporated T5 films were characterized by a preferred orientation of the h00 planes parallel to the glass substrate. Melting of the films followed by rapid quenching to room temperature led to the formation of micrometer-sized, single-crystal-like structures, characterized by uniaxially aligned stripes. XRD proved that the melting-quenching process enhanced molecular ordering and increased the size of domains with the molecule's long axes tilted by about 65 degrees with respect to the substrate plane and piled up side-by-side along parallel columns. AFM measurements on the melt-quenched structures showed that a hierarchical architecture was built by reiteration across multiple length scales of the same recurring motif. Because of the tendency of T5 to form highly crystalline vacuum-evaporated thin films, a field-effect hole mobility comparable to state-of-the-art FET mobility of alpha-sexithiophene films was reached, without any attempt to optimize deposition conditions.

  6. Prediction of charge mobility in organic semiconductors with consideration of the grain-size effect

    Science.gov (United States)

    Park, Jin Woo; Lee, Kyu Il; Choi, Youn-Suk; Kim, Jung-Hwa; Jeong, Daun; Kwon, Young-Nam; Park, Jong-Bong; Ahn, Ho Young; Park, Jeong-Il; Lee, Hyo Sug; Shin, Jaikwang

    2016-09-01

    A new computational model to predict the hole mobility of poly-crystalline organic semiconductors in thin film was developed (refer to Phys. Chem. Chem. Phys., 2016, DOI: 10.1039/C6CP02993K). Site energy differences and transfer integrals in crystalline morphologies of organic molecules were obtained from quantum chemical calculation, in which the periodic boundary condition was efficiently applied to capture the interactions with the surrounding molecules in the crystalline organic layer. Then the parameters were employed in kinetic Monte Carlo (kMC) simulations to estimate the carrier mobility. Carrier transport in multiple directions has been considered in the kMC simulation to mimic polycrystalline characteristic in thin-film condition. Furthermore, the calculated mobility was corrected with a calibration equation based on the microscopic images of thin films to take the effect of grain boundary into account. As a result, good agreement was observed between the predicted and measured hole mobility values for 21 molecular species: the coefficient of determination (R2) was estimated to be 0.83 and the mean absolute error was 1.32 cm2 V-1 s-1. This numerical approach can be applied to any molecules for which crystal structures are available and will provide a rapid and precise way of predicting the device performance.

  7. Organic / IV, III-V Semiconductor Hybrid Solar Cells

    Directory of Open Access Journals (Sweden)

    Pang-Leen Ong

    2010-03-01

    Full Text Available We present a review of the emerging class of hybrid solar cells based on organic-semiconductor (Group IV, III-V, nanocomposites, which states separately from dye synthesized, polymer-metal oxides and organic-inorganic (Group II-VI nanocomposite photovoltaics. The structure of such hybrid cell comprises of an organic active material (p-type deposited by coating, printing or spraying technique on the surface of bulk or nanostructured semiconductor (n-type forming a heterojunction between the two materials. Organic components include various photosensitive monomers (e.g., phtalocyanines or porphyrines, conjugated polymers, and carbon nanotubes. Mechanisms of the charge separation at the interface and their transport are discussed. Also, perspectives on the future development of such hybrid cells and comparative analysis with other classes of photovoltaics of third generation are presented.

  8. Weaving of organic threads into a crystalline covalent organic framework.

    Science.gov (United States)

    Liu, Yuzhong; Ma, Yanhang; Zhao, Yingbo; Sun, Xixi; Gándara, Felipe; Furukawa, Hiroyasu; Liu, Zheng; Zhu, Hanyu; Zhu, Chenhui; Suenaga, Kazutomo; Oleynikov, Peter; Alshammari, Ahmad S; Zhang, Xiang; Terasaki, Osamu; Yaghi, Omar M

    2016-01-22

    A three-dimensional covalent organic framework (COF-505) constructed from helical organic threads, designed to be mutually weaving at regular intervals, has been synthesized by imine condensation reactions of aldehyde functionalized copper(I)-bisphenanthroline tetrafluoroborate, Cu(PDB)2(BF4), and benzidine (BZ). The copper centers are topologically independent of the weaving within the COF structure and serve as templates for bringing the threads into a woven pattern rather than the more commonly observed parallel arrangement. The copper(I) ions can be reversibly removed and added without loss of the COF structure, for which a tenfold increase in elasticity accompanies its demetalation. The threads in COF-505 have many degrees of freedom for enormous deviations to take place between them, throughout the material, without undoing the weaving of the overall structure.

  9. Organic semiconductors: What makes the spin relax?

    Science.gov (United States)

    Bobbert, Peter A.

    2010-04-01

    Spin relaxation in organic materials is expected to be slow because of weak spin-orbit coupling. The effects of deuteration and coherent spin excitation show that the spin-relaxation time is actually limited by hyperfine fields.

  10. Rational design of organic semiconductors for texture control and self-patterning on halogenated surfaces

    KAUST Repository

    Ward, Jeremy W.

    2014-05-15

    Understanding the interactions at interfaces between the materials constituting consecutive layers within organic thin-film transistors (OTFTs) is vital for optimizing charge injection and transport, tuning thin-film microstructure, and designing new materials. Here, the influence of the interactions at the interface between a halogenated organic semiconductor (OSC) thin film and a halogenated self-assembled monolayer on the formation of the crystalline texture directly affecting the performance of OTFTs is explored. By correlating the results from microbeam grazing incidence wide angle X-ray scattering (μGIWAXS) measurements of structure and texture with OTFT characteristics, two or more interaction paths between the terminating atoms of the semiconductor and the halogenated surface are found to be vital to templating a highly ordered morphology in the first layer. These interactions are effective when the separating distance is lower than 2.5 dw, where dw represents the van der Waals distance. The ability to modulate charge carrier transport by several orders of magnitude by promoting "edge-on" versus "face-on" molecular orientation and crystallographic textures in OSCs is demonstrated. It is found that the "edge-on" self-assembly of molecules forms uniform, (001) lamellar-textured crystallites which promote high charge carrier mobility, and that charge transport suffers as the fraction of the "face-on" oriented crystallites increases. The role of interfacial halogenation in mediating texture formation and the self-patterning of organic semiconductor films, as well as the resulting effects on charge transport in organic thin-film transistors, are explored. The presence of two or more anchoring sites between a halogenated semiconductor and a halogenated self-assembled monolayer, closer than about twice the corresponding van der Waals distance, alter the microstructure and improve electrical properties. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Circuit design in organic semiconductor technologies

    NARCIS (Netherlands)

    Heremans, P.; Dehaene, W.; Steyaert, M.; Myny, K.; Mariën, H.; Genoe, J.; Gelinck, G.H.; Veenendaal, E. van

    2011-01-01

    In this paper, we review the state of the art of digital and analog circuits that have been shown in recent years in organic thin-film transistor technology on flexible plastic foil. The transistors are developed for backplanes of displays, and therefore have the characteristics to be unipolar and t

  12. Space processing of crystalline materials: A study of known methods of electrical characterization of semiconductors: Bibliography

    Science.gov (United States)

    Castle, J. G.

    1976-01-01

    A selective bibliography is given on electrical characterization techniques for semiconductors. Emphasis is placed on noncontacting techniques for the standard electrical parameters for monitoring crystal growth in space, preferably in real time with high resolution.

  13. Strong Coupling between Plasmons and Organic Semiconductors

    Directory of Open Access Journals (Sweden)

    Joel Bellessa

    2014-05-01

    Full Text Available In this paper we describe the properties of organic material in strong coupling with plasmon, mainly based on our work in this field of research. The strong coupling modifies the optical transitions of the structure, and occurs when the interaction between molecules and plasmon prevails on the damping of the system. We describe the dispersion relation of different plasmonic systems, delocalized and localized plasmon, coupled to aggregated dyes and the typical properties of these systems in strong coupling. The modification of the dye emission is also studied. In the second part, the effect of the microscopic structure of the organics, which can be seen as a disordered film, is described. As the different molecules couple to the same plasmon mode, an extended coherent state on several microns is observed.

  14. Glass-Forming Organic Semiconductors for Optoelectronics

    Directory of Open Access Journals (Sweden)

    Aušra TOMKEVIČIENĖ

    2011-11-01

    Full Text Available Organic electronics and optoelectronics are newly emerging fields of science and technology that cover chemistry, physics, and materials science. Electronic and optoelectronic devices using organic materials are attractive because of the materials characteristics, potentially low cost, and capability of large-area, flexible device fabrication. Such devices as OLEDs, OPVs, and OFETs involve charge transport as a main process in their operation processes, and therefore, require high-performance charge-transporting materials. This review article focuses on charge-transporting materials for use in OLEDs, OPVs, and OFETs. We have tried to arrange the charge-transporting materials in order by classifying them on the basis of their molecular structures. Molecular design concepts for charge-transporting materials and their charge-transport properties are discussed.http://dx.doi.org/10.5755/j01.ms.17.4.767

  15. Modeling disordered morphologies in organic semiconductors.

    Science.gov (United States)

    Neumann, Tobias; Danilov, Denis; Lennartz, Christian; Wenzel, Wolfgang

    2013-12-05

    Organic thin film devices are investigated for many diverse applications, including light emitting diodes, organic photovoltaic and organic field effect transistors. Modeling of their properties on the basis of their detailed molecular structure requires generation of representative morphologies, many of which are amorphous. Because time-scales for the formation of the molecular structure are slow, we have developed a linear-scaling single molecule deposition protocol which generates morphologies by simulation of vapor deposition of molecular films. We have applied this protocol to systems comprising argon, buckminsterfullerene, N,N-Di(naphthalene-1-yl)-N,N'-diphenyl-benzidine, mer-tris(8-hydroxy-quinoline)aluminum(III), and phenyl-C61-butyric acid methyl ester, with and without postdeposition relaxation of the individually deposited molecules. The proposed single molecule deposition protocol leads to formation of highly ordered morphologies in argon and buckminsterfullerene systems when postdeposition relaxation is used to locally anneal the configuration in the vicinity of the newly deposited molecule. The other systems formed disordered amorphous morphologies and the postdeposition local relaxation step has only a small effect on the characteristics of the disordered morphology in comparison to the materials forming crystals.

  16. Aqueous oxidation reaction enabled layer-by-layer corrosion of semiconductor nanoplates into single-crystalline 2D nanocrystals with single layer accuracy and ionic surface capping.

    Science.gov (United States)

    Ji, Muwei; Xu, Meng; Zhang, Jun; Liu, Jiajia; Zhang, Jiatao

    2016-02-25

    A controllable aqueous oxidation reaction enabled layer-by-layer corrosion has been proposed to prepare high-quality two-dimensional (2D) semiconductor nanocrystals with single layer accuracy and well-retained hexagonal shapes. The appropriate oxidizing agent, such as H2O2, Fe(NO3)3, and HNO3, could not only corrode the layered-crystalline-structured Bi2Te3 nanoplates layer-by-layer to be a single quintuple layer, but also replace the organic barriers to be ionic ligands on the surface synergistically. AFM analysis was used to confirm the layer-by-layer exfoliation from the side to the center. Together with precise XRD, LRTEM and HRTEM characterizations, the controllable oxidation reaction enabled aqueous layer-by-layer corrosion mechanism has been studied.

  17. Toward continuous-wave operation of organic semiconductor lasers

    Science.gov (United States)

    Sandanayaka, Atula S. D.; Matsushima, Toshinori; Bencheikh, Fatima; Yoshida, Kou; Inoue, Munetomo; Fujihara, Takashi; Goushi, Kenichi; Ribierre, Jean-Charles; Adachi, Chihaya

    2017-01-01

    The demonstration of continuous-wave lasing from organic semiconductor films is highly desirable for practical applications in the areas of spectroscopy, data communication, and sensing, but it still remains a challenging objective. We report low-threshold surface-emitting organic distributed feedback lasers operating in the quasi–continuous-wave regime at 80 MHz as well as under long-pulse photoexcitation of 30 ms. This outstanding performance was achieved using an organic semiconductor thin film with high optical gain, high photoluminescence quantum yield, and no triplet absorption losses at the lasing wavelength combined with a mixed-order distributed feedback grating to achieve a low lasing threshold. A simple encapsulation technique greatly reduced the laser-induced thermal degradation and suppressed the ablation of the gain medium otherwise taking place under intense continuous-wave photoexcitation. Overall, this study provides evidence that the development of a continuous-wave organic semiconductor laser technology is possible via the engineering of the gain medium and the device architecture. PMID:28508042

  18. Study of neural cells on organic semiconductor ultra thin films

    Energy Technology Data Exchange (ETDEWEB)

    Bystrenova, Eva; Tonazzini, Ilaria; Stoliar, Pablo; Greco, Pierpaolo; Lazar, Adina; Dutta, Soumya; Dionigi, Chiara; Cacace, Marcello; Biscarini, Fabio [ISMN-CNR, Bologna (Italy); Jelitai, Marta; Madarasz, Emilia [IEM- HAS, Budapest (Hungary); Huth, Martin; Nickel, Bert [LMU, Munich (Germany); Martini, Claudia [Dept. PNPB, Univ. of Pisa (Italy)

    2008-07-01

    Many technological advances are currently being developed for nano-fabrication, offering the ability to create and control patterns of soft materials. We report the deposition of cells on organic semiconductor ultra-thin films. This is a first step towards the development of active bio/non bio systems for electrical transduction. Thin films of pentacene, whose thickness was systematically varied, were grown by high vacuum sublimation. We report adhesion, growth, and differentiation of human astroglial cells and mouse neural stem cells on an organic semiconductor. Viability of astroglial cells in time was measured as a function of the roughness and the characteristic morphology of ultra thin organic film, as well as the features of the patterned molecules. Optical fluorescence microscope coupled to atomic force microscope was used to monitor the presence, density and shape of deposited cells. Neural stem cells remain viable, differentiate by retinoic acid and form dense neuronal networks. We have shown the possibility to integrate living neural cells on organic semiconductor thin films.

  19. Simulating charge transport in organic semiconductors and devices: a review

    Science.gov (United States)

    Groves, C.

    2017-02-01

    Charge transport simulation can be a valuable tool to better understand, optimise and design organic transistors (OTFTs), photovoltaics (OPVs), and light-emitting diodes (OLEDs). This review presents an overview of common charge transport and device models; namely drift-diffusion, master equation, mesoscale kinetic Monte Carlo and quantum chemical Monte Carlo, and a discussion of the relative merits of each. This is followed by a review of the application of these models as applied to charge transport in organic semiconductors and devices, highlighting in particular the insights made possible by modelling. The review concludes with an outlook for charge transport modelling in organic electronics.

  20. Investigation of organic semiconductor interlayers in hybrid PEDOT:PSS/silicon solar cells

    Science.gov (United States)

    Weingarten, Martin; Zweipfennig, Thorsten; Sanders, Simon; Stümmler, Dominik; Pfeiffer, Pascal; Vescan, Andrei; Kalisch, Holger

    2016-10-01

    In the last years, hybrid organic/inorganic solar cells have attracted great interest in photovoltaic research due to their expected potential to combine the advantages of both material classes, the excellent electrical properties and stability of the inorganic and the low-cost processability of the organic semiconductors. This work is focused on hybrid solar cells based on n-doped crystalline Si as the inorganic and the polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) as the organic part of the device. The hole-conducting organic semiconductors poly(3-hexylthiophene-2,5-diyl) (P3HT) and 2,2‧,7,7‧-Tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9‧-spirobifluorene (Spiro-MeOTAD) are investigated as electron blocking interlayers to reduce the parasitic electron current into the metal top contact and thereby increase the efficiency of the solar cell. In this context, P3HT is identified to be insufficient as an interlayer material due to unfavorable hysteresis effects. On the other hand, for solar cells with a Spiro-MeOTAD interlayer, the power conversion efficiency (PCE) is significantly increased. This is mainly attributed to an increased short-circuit current density. For the best performing device, a PCE of 14.3% is achieved, which is one of the highest values reported for this type of hybrid solar cells so far.

  1. Effective Temperature and Universal Conductivity Scaling in Organic Semiconductors

    OpenAIRE

    Hassan Abdalla; Kevin van de Ruit; Martijn Kemerink

    2015-01-01

    We investigate the scalability of the temperature- and electric field-dependence of the conductivity of disordered organic semiconductors to ‘universal’ curves by two different but commonly employed methods; by so-called universal scaling and by using the effective temperature concept. Experimentally both scaling methods were found to be equally applicable to the out-of-plane charge transport in PEDOT:PSS thin films of various compositions. Both methods are shown to be equivalent in terms of ...

  2. Ultrathin organic semiconductor films--soft matter effect.

    Science.gov (United States)

    Wang, Tong; Yan, Donghang

    2014-05-01

    The growth of organic semiconductor thin films has been a crucial issue in organic electronics, especially the growth at the early stages. The thin-film phase has been found to be a common phenomenon in many organic semiconductor thin films, which is closely related with the weak van der Waals interaction between organic molecules, the long-range interaction between organic molecules and the substrate, as well as the soft matter characteristics of ultrathin films. The growth behavior and soft matter characteristics of the thin-film phase have great effects on thin film morphology and structure, for example, the formation and coalescence of grain boundaries, which further influences the performance of organic electronic devices. The understanding of thin-film phase and its intrinsic quality is necessary for fabricating large-size, highly ordered, continuous and defect-free ultrathin films. This review will focus on the growth behavior of organic ultrathin films, i.e., the level of the first several molecular layers, and provide an overview of the soft matter characteristics.

  3. Space processing of crystalline materials: A study of known methods of electrical characterization of semiconductors

    Science.gov (United States)

    Castle, J. G.

    1976-01-01

    A literature survey is presented covering nondestructive methods of electrical characterization of semiconductors. A synopsis of each technique deals with the applicability of the techniques to various device parameters and to potential in-flight use before, during, and after growth experiments on space flights. It is concluded that the very recent surge in the commercial production of large scale integrated circuitry and other semiconductor arrays requiring uniformity on the scale of a few microns, involves nondestructive test procedures which could well be useful to NASA for in-flight use in space processing.

  4. Neutron Radiation Tolerance of Two Benchmark Thiophene-Based Conjugated Polymers: the Importance of Crystallinity for Organic Avionics

    Science.gov (United States)

    Paternò, G. M.; Robbiano, V.; Fraser, K. J.; Frost, C.; García Sakai, V.; Cacialli, F.

    2017-01-01

    Aviation and space applications can benefit significantly from lightweight organic electronics, now spanning from displays to logics, because of the vital importance of minimising payload (size and mass). It is thus crucial to assess the damage caused to such materials by cosmic rays and neutrons, which pose a variety of hazards through atomic displacements following neutron-nucleus collisions. Here we report the first study of the neutron radiation tolerance of two poly(thiophene)s-based organic semiconductors: poly(3-hexylthiophene-2,5-diyl), P3HT, and the liquid-crystalline poly(2,5-bis (3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene), PBTTT. We combine spectroscopic investigations with characterisation of intrinsic charge mobility to show that PBTTT exhibits significantly higher tolerance than P3HT. We explain this in terms of a superior chemical, structural and conformational stability of PBTTT, which can be ascribed to its higher crystallinity, in turn induced by a combination of molecular design features. Our approach can be used to develop design strategies for better neutron radiation-tolerant materials, thus paving the way for organic semiconductors to enter avionics and space applications. PMID:28112195

  5. Neutron Radiation Tolerance of Two Benchmark Thiophene-Based Conjugated Polymers: the Importance of Crystallinity for Organic Avionics

    Science.gov (United States)

    Paternò, G. M.; Robbiano, V.; Fraser, K. J.; Frost, C.; García Sakai, V.; Cacialli, F.

    2017-01-01

    Aviation and space applications can benefit significantly from lightweight organic electronics, now spanning from displays to logics, because of the vital importance of minimising payload (size and mass). It is thus crucial to assess the damage caused to such materials by cosmic rays and neutrons, which pose a variety of hazards through atomic displacements following neutron-nucleus collisions. Here we report the first study of the neutron radiation tolerance of two poly(thiophene)s-based organic semiconductors: poly(3-hexylthiophene-2,5-diyl), P3HT, and the liquid-crystalline poly(2,5-bis (3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene), PBTTT. We combine spectroscopic investigations with characterisation of intrinsic charge mobility to show that PBTTT exhibits significantly higher tolerance than P3HT. We explain this in terms of a superior chemical, structural and conformational stability of PBTTT, which can be ascribed to its higher crystallinity, in turn induced by a combination of molecular design features. Our approach can be used to develop design strategies for better neutron radiation-tolerant materials, thus paving the way for organic semiconductors to enter avionics and space applications.

  6. International Workshop on: Hydrogen Migration and the Stability of Hydrogen Related Complexes in Crystalline Semiconductors Held in Federal Republic of Germany on 3-6 November 1991

    Science.gov (United States)

    1991-11-06

    atomic hydrogen in doped crystalline silicon 53 A. Amore Bonapasta Modeling of hydrogen diffusion in semiconductors 54 D. Mathiot Diffusion and...DEPTH ( pm) Figure 1: Evolution of thc active boron concentration profile as a function of the re- verso -bias annealing time (VfR...the Materials Research Society, Boston, MA, 2-6 December 1991. - 53 - Multitrapping of atomic Hydrogen in doped crystalline silicon. A. Amore

  7. Charge transport in nanoscale vertical organic semiconductor pillar devices

    Science.gov (United States)

    Wilbers, Janine G. E.; Xu, Bojian; Bobbert, Peter A.; de Jong, Michel P.; van der Wiel, Wilfred G.

    2017-01-01

    We report charge transport measurements in nanoscale vertical pillar structures incorporating ultrathin layers of the organic semiconductor poly(3-hexylthiophene) (P3HT). P3HT layers with thickness down to 5 nm are gently top-contacted using wedging transfer, yielding highly reproducible, robust nanoscale junctions carrying high current densities (up to 106 A/m2). Current-voltage data modeling demonstrates excellent hole injection. This work opens up the pathway towards nanoscale, ultrashort-channel organic transistors for high-frequency and high-current-density operation.

  8. Theory for Spin Diffusion in Disordered Organic Semiconductors

    Science.gov (United States)

    Bobbert, P. A.; Wagemans, W.; van Oost, F. W. A.; Koopmans, B.; Wohlgenannt, M.

    2009-04-01

    We present a theory for spin diffusion in disordered organic semiconductors, based on incoherent hopping of a charge carrier and coherent precession of its spin in an effective magnetic field, composed of the random hyperfine field of hydrogen nuclei and an applied magnetic field. From Monte Carlo simulations and an analysis of the waiting-time distribution of the carrier we predict a surprisingly weak temperature dependence, but a considerable magnetic-field dependence of the spin-diffusion length. We show that both predictions are in agreement with experiments on organic spin valves.

  9. SEMICONDUCTOR DEVICES: Humidity sensitive organic field effect transistor

    Science.gov (United States)

    Murtaza, I.; Karimov, Kh S.; Ahmad, Zubair; Qazi, I.; Mahroof-Tahir, M.; Khan, T. A.; Amin, T.

    2010-05-01

    This paper reports the experimental results for the humidity dependent properties of an organic field effect transistor. The organic field effect transistor was fabricated on thoroughly cleaned glass substrate, in which the junction between the metal gate and the organic channel plays the role of gate dielectric. Thin films of organic semiconductor copper phthalocynanine (CuPc) and semitransparent Al were deposited in sequence by vacuum thermal evaporation on the glass substrate with preliminarily deposited Ag source and drain electrodes. The output and transfer characteristics of the fabricated device were performed. The effect of humidity on the drain current, drain current-drain voltage relationship, and threshold voltage was investigated. It was observed that humidity has a strong effect on the characteristics of the organic field effect transistor.

  10. Capillarity-Driven Welding of Semiconductor Nanowires for Crystalline and Electrically Ohmic Junctions.

    Science.gov (United States)

    Celano, Thomas A; Hill, David J; Zhang, Xing; Pinion, Christopher W; Christesen, Joseph D; Flynn, Cory J; McBride, James R; Cahoon, James F

    2016-08-10

    Semiconductor nanowires (NWs) have been demonstrated as a potential platform for a wide-range of technologies, yet a method to interconnect functionally encoded NWs has remained a challenge. Here, we report a simple capillarity-driven and self-limited welding process that forms mechanically robust and Ohmic inter-NW connections. The process occurs at the point-of-contact between two NWs at temperatures 400-600 °C below the bulk melting point of the semiconductor. It can be explained by capillarity-driven surface diffusion, inducing a localized geometrical rearrangement that reduces spatial curvature. The resulting weld comprises two fused NWs separated by a single, Ohmic grain boundary. We expect the welding mechanism to be generic for all types of NWs and to enable the development of complex interconnected networks for neuromorphic computation, battery and solar cell electrodes, and bioelectronic scaffolds.

  11. Template fabrication of highly ordered arrays of organic semiconductor nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Heckel, Christian; Ostendorp, Stefan; Lei, Yong; Wilde, Gerhard [Institut fuer Materialphysik, Muenster (Germany)

    2011-07-01

    Porous alumina membrane (PAM) is a widely used template for the fabrication of highly ordered arrays of one-dimensional (1D) nanostructures. The structural parameters of the PAMs are adjustable, including the pore diameter and spacing, and the thickness of the membranes. And thus the structures of the 1D nanomaterials prepared using PAMs can be controlled. On the other hand, the investigation of organic semiconductors opens a new field of applications in computer technology like twistable displays or printing integrated circuits. In the current work, these two technologies are combined by depositing organic n-type semiconductors into the pores of PAMs using different synthesizing processes such as molecular evaporation and solution-phase self-assembly. As a result, highly ordered arrays of organic semiconducting wires are obtained within the pores with a diameter of about 50 nm, which indicates that it is possible to fill the pores with organic materials.The properties of these ''filled'' membranes are characterized by measuring the electrical properties of several nanowires pooled together and also of single nanowires by AFM-based methods.

  12. Strain effects on the work function of an organic semiconductor

    KAUST Repository

    Wu, Yanfei

    2016-02-01

    Establishing fundamental relationships between strain and work function (WF) in organic semiconductors is important not only for understanding electrical properties of organic thin films, which are subject to both intrinsic and extrinsic strains, but also for developing flexible electronic devices. Here we investigate tensile and compressive strain effects on the WF of rubrene single crystals. Mechanical strain induced by thermal expansion mismatch between the substrate and rubrene is quantified by X-ray diffraction. The corresponding WF change is measured by scanning Kelvin probe microscopy. The WF of rubrene increases (decreases) significantly with in-plane tensile (compressive) strain, which agrees qualitatively with density functional theory calculations. An elastic-to-plastic transition, characterized by a steep rise of the WF, occurs at ~0.05% tensile strain along the rubrene π-stacking direction. The results provide the first concrete link between mechanical strain and WF of an organic semiconductor and have important implications for understanding the connection between structural and electronic disorder in soft organic electronic materials.

  13. Emission characteristics of volatile organic compounds from semiconductor manufacturing.

    Science.gov (United States)

    Chein, HungMin; Chen, Tzu Ming

    2003-08-01

    A huge amount of volatile organic compounds (VOCs) is produced and emitted with waste gases from semiconductor manufacturing processes, such as cleaning, etching, and developing. VOC emissions from semiconductor factories located at Science-Based Industrial Park, Hsin-chu, Taiwan, were measured and characterized in this study. A total of nine typical semiconductor fabricators (fabs) were monitored over a 12-month period (October 2000-September 2001). A flame ionization analyzer was employed to measure the VOC emission rate continuously in a real-time fashion. The amount of chemical use was adopted from the data that were reported to the Environmental Protection Bureau in Hsin-chu County as per the regulation of the Taiwan Environmental Protection Administration. The VOC emission factor, defined as the emission rate (kg/month) divided by the amount of chemical use (L/month), was determined to be 0.038 +/- 0.016 kg/L. A linear regression equation is proposed to fit the data with the correlation coefficient (R2)=0.863. The emission profiles of VOCs, which were drawn using the gas chromatograph/mass spectrometer analysis method, show that isopropyl alcohol is the dominant compound in most of the fabs.

  14. Theory of potential distributions in abrupt heterojunction crystalline semiconductor devices: Treatment of Schottky barriers and rectifiers

    Science.gov (United States)

    Mohammad, S. Noor

    1988-03-01

    A theoretical method for potential distribution in abrupt heterojunctions (HJs) made of uniformly doped degenerate semiconductors has been developed. The method reduces automatically to that in HJs from nondegenerate semiconductors in the limits of low carrier concentrations. For the development of the method the rigid band approximation of degenerate semiconductors has been considered to be valid. The transport equations of Marshak and Van Vliet [Solid-State Electron. 21, 417 (1978)] and an analytical approximation for the Fermi-Dirac integral of order half by the present author [Solid-State Electron. 30, 713 (1987)] have been employed for the formulation. The average of the scattered experimental data for band-gap narrowing of n-Si, n-Ge, p-GaAs, and n-InP have been fitted to the same form as that for the Fermi-Dirac integral of order 1/2 to ease this formulation. Local electrostatic field and local electrostatic potentials obtained from the formulation reduce to those of Chatterjee and Marshak [Solid-State Electron. 24, 1111 (1981)], Cserveny [Int. J. Electron. 25, 65 (1968)], and Kroemer [J. Appl. Phys. 52, 873 (1981)] under special conditions. It is noted that band-gap narrowing and consideration of Fermi-Dirac statistics represent opposite effects for effective intrinsic carrier concentration and local electrostatic field. At some critical concentration belonging to the degenerate limit of a semiconductor, these two effects cancel the influence of each other on effective intrinsic carrier concentration of the semiconductor and on transition region properties of an HJ. Below this critical concentration, band-gap narrowing rather than a consideration of Fermi-Dirac statistics dominantly influences the device properties. However, above this critical concentration, consideration of Fermi-Dirac statistics dominates over the other. Applications of electrostatic field and electrostatic potential to isotype and anisotype HJs have been discussed. On the basis of

  15. Photogenerated Intrinsic Free Carriers in Small-molecule Organic Semiconductors Visualized by Ultrafast Spectroscopy

    Science.gov (United States)

    He, Xiaochuan; Zhu, Gangbei; Yang, Jianbing; Chang, Hao; Meng, Qingyu; Zhao, Hongwu; Zhou, Xin; Yue, Shuai; Wang, Zhuan; Shi, Jinan; Gu, Lin; Yan, Donghang; Weng, Yuxiang

    2015-11-01

    Confirmation of direct photogeneration of intrinsic delocalized free carriers in small-molecule organic semiconductors has been a long-sought but unsolved issue, which is of fundamental significance to its application in photo-electric devices. Although the excitonic description of photoexcitation in these materials has been widely accepted, this concept is challenged by recently reported phenomena. Here we report observation of direct delocalized free carrier generation upon interband photoexcitation in highly crystalline zinc phthalocyanine films prepared by the weak epitaxy growth method using ultrafast spectroscopy. Transient absorption spectra spanning the visible to mid-infrared region revealed the existence of short-lived free electrons and holes with a diffusion length estimated to cross at least 11 molecules along the π-π stacking direction that subsequently localize to form charge transfer excitons. The interband transition was evidenced by ultraviolet-visible absorption, photoluminescence and electroluminescence spectroscopy. Our results suggest that delocalized free carriers photogeneration can also be achieved in organic semiconductors when the molecules are packed properly.

  16. Self-interaction and charge transfer in organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Koerzdoerfer, Thomas

    2009-12-18

    This work concentrates on the problem of self-interaction, which is one of the most serious problems of commonly used approximative density functionals. As a major result of this work, it is demonstrated that self-interaction plays a decisive role for the performance of different approximative functionals in predicting accurate electronic properties of organic molecular semiconductors. In search for a solution to the self-interaction problem, a new concept for correcting commonly used density functionals for self-interaction is introduced and applied to a variety of systems, spanning small molecules, extended molecular chains, and organic molecular semiconductors. It is further shown that the performance of functionals that are not free from self-interaction can vary strongly for different systems and observables of interest, thus entailing the danger of misinterpretation of the results obtained from those functionals. The underlying reasons for the varying performance of commonly used density functionals are discussed thoroughly in this work. Finally, this thesis provides strategies that allow to analyze the reliability of commonly used approximations to the exchange-correlation functional for particular systems of interest. This cumulative dissertation is divided into three parts. Part I gives a short introduction into DFT and its time-dependent extension (TDDFT). Part II provides further insights into the self-interaction problem, presents a newly developed concept for the correction of self-interaction, gives an introduction into the publications, and discusses their basic results. Finally, the four publications on self-interaction and charge-transfer in extended molecular systems and organic molecular semiconductors are collected in Part III. (orig.)

  17. Universal size-dependent conductance fluctuations in disordered organic semiconductors.

    Science.gov (United States)

    Massé, A; Coehoorn, R; Bobbert, P A

    2014-09-12

    Numerically exact results of hopping charge transport in disordered organic semiconductors show for uncorrelated and dipole-correlated Gaussian energy disorder a universal, power-law, and non-power-law dependence, respectively, of the relative conductance fluctuations on the size of the considered region. Data collapse occurs upon scaling with a characteristic length having a power-law temperature dependence. Below this length, which can be as high as 100 nm for correlated disorder in a realistic case, fluctuations dominate and a continuum description of charge transport breaks down.

  18. Universal Size-Dependent Conductance Fluctuations in Disordered Organic Semiconductors

    Science.gov (United States)

    Massé, A.; Coehoorn, R.; Bobbert, P. A.

    2014-09-01

    Numerically exact results of hopping charge transport in disordered organic semiconductors show for uncorrelated and dipole-correlated Gaussian energy disorder a universal, power-law, and non-power-law dependence, respectively, of the relative conductance fluctuations on the size of the considered region. Data collapse occurs upon scaling with a characteristic length having a power-law temperature dependence. Below this length, which can be as high as 100 nm for correlated disorder in a realistic case, fluctuations dominate and a continuum description of charge transport breaks down.

  19. Organic semiconductor heterojunction and its application in organic light-emitting diodes (Conference Presentation)

    Science.gov (United States)

    Ma, Dongge

    2016-09-01

    Organic light-emitting diodes (OLEDs) have drawn increasing attention as the next generation displays and lighting sources. High efficiency and long lifetime are necessary for OLEDs in practical applications. In conventional OLEDs, the charge carriers are directly injected into the organic transport layers from electrodes, the injection barriers between the organic transport layers and electrodes are unavoidable due to the mismatch between the work function of metal electrode and the energy level of charge-transport layer, which greatly affects the performance of fabricated OLEDs. Furthermore, tandem OLEDs, which are fabricated by vertically connecting several individual electroluminescent (EL) units together in series via an appropriate charge generation layer (CGL) with the entire device driven by a single power source can significantly enhance current efficiency and stability, but their performance is strongly dependent on the used CGL, especially the power efficiency is difficult to enhance due to the increase of working voltage. Recently we found that organic semiconductor heterojunctions show efficient charge generation effect and as CGL, not only double the luminance and current efficiency, but also greatly improve the power efficiency, which is difficult in tandem OLEDs based on conventional CGLs. We also realized electrode-independent charge injection by using organic semiconductor heterojuncrions as injectors in OLEDs, and obtained comparable electroluminescent (EL) performance with that of conventional OLEDs. Here, we report the results of tandem OLEDs based on organic semiconductor heterojunctions as CGL and OLEDs using organic semiconductor heterojunctions as injectors, and discuss this working mechanism in detail.

  20. Polymorphism of Crystalline Molecular Donors for Solution-Processed Organic Photovoltaics.

    Science.gov (United States)

    van der Poll, Thomas S; Zhugayevych, Andriy; Chertkov, Eli; Bakus, Ronald C; Coughlin, Jessica E; Teat, Simon J; Bazan, Guillermo C; Tretiak, Sergei

    2014-08-01

    Using ab initio calculations and classical molecular dynamics simulations coupled to complementary experimental characterization, four molecular semiconductors were investigated in vacuum, solution, and crystalline form. Independently, the molecules can be described as nearly isostructural, yet in crystalline form, two distinct crystal systems are observed with characteristic molecular geometries. The minor structural variations provide a platform to investigate the subtlety of simple substitutions, with particular focus on polymorphism and rotational isomerism. Resolved crystal structures offer an exact description of intermolecular ordering in the solid state. This enables evaluation of molecular binding energy in various crystallographic configurations to fully rationalize observed crystal packing on a basis of first-principle calculations of intermolecular interactions.

  1. Low level optical absorption measurements on organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Stella, M.; Rojas, F.; Escarre, J.; Asensi, J.M.; Bertomeu, J.; Andreu, J. [Dept. de Fisica Aplicada i Optica, Universitat de Barcelona. Av. Diagonal 647, 08028 Barcelona (Spain); Voz, C.; Puigdollers, J.; Fonrodona, M. [Micro and Nano Technology Group (MNT), Dept. d' Enginyeria Electronica, Universitat Politecnica de Catalunya, C/Jordi Girona 1-3, Campus Nord - Modul C4, 08034 Barcelona (Spain)

    2006-06-15

    The optical absorption of n-type (C{sub 60} and PTCDA) and p-type (CuPc and pentacene) organic semiconductors is investigated by optical transmission and photothermal deflection spectroscopy. The usual absorption bands related to HOMO-LUMO transitions are observed in the high absorption region of transmission spectra. Photothermal deflection spectroscopy also evidences exponential absorption shoulders with characteristic energies 47meV for CuPc, 38meV for pentacene, 50 meV for PTCDA and 87meV for C{sub 60}. In addition, broad bands in the low absorption level are observed for C{sub 60} and PTCDA. These bands have been attributed to contamination due to air exposure. On the other hand, in CuPc a clear absorption peak at 1.12eV is observed with smaller features at 1.04eV, 1.20eV and 1.33eV. These peaks are attributed to transitions between the Pc levels of CuPc ions. Finally, the optical absorption expected in blends of organic semiconductors is estimated by an effective media approximation. (author)

  2. Theoretically Rational Designs of Transport Organic Semiconductors Based on Heteroacenes

    Institute of Scientific and Technical Information of China (English)

    HE,Yuan-Hang; HUI,Ren-Jie; YI,Yuan-Ping; SHUAI,Zhi-Gang

    2008-01-01

    A Marcus electron transfer theory coupled with an incoherent polaron hopping and charge diffusion model in combining with first-principle quantum chemistry calculation was applied to investigating the effects of heteroatom on the intermolecular charge transfer rate for a seres of heteroacene molecules.The influences of intermolecular packing and charge reorganization energy were discussed.It was found that the sulphur and nitrogen substituted heteroacenes were intrinsically hole-transporting materials due to the reduced hole reorganization energy and the enhanced overlap between HOMOs.For the oxygen-substituted heteroacene,it was found that both the electronic couplings and the reorganization energies for holes and electrons were comparative,indicating the application potential of ambipolar devices.Most interestingly,for the boron-substituted heteroacenes,theoretical calculations predicted a promising electron-transport material,which is rare for organic materials.These findings provide insights into rationally designing organic semiconductors with specific properties.

  3. Structural and electronic implications for carrier injection into organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Castellani, Mauro [Universitaet Potsdam, Institut fuer Physik und Astronomie, Potsdam-Golm (Germany); Salzmann, Ingo; Yu, Shuwen; Koch, Norbert [Humboldt-Universitaet zu Berlin, Institut fuer Physik, Berlin (Germany); Bugnon, Philippe [Ecole Polytechnique Federale de Lausanne (Switzerland). Institut des Materiaux; Oehzelt, Martin [Johannes Kepler Universitaet Linz (Austria). Institut fuer Experimentalphysik

    2009-10-15

    We report on the structural and electronic interface formation between ITO (indium-tin-oxide) and prototypical organic small molecular semiconductors, i.e., CuPc (copper phthalocyanine) and {alpha}-NPD (N,N'-di(naphtalen-1-yl)-N,N'-diphenyl-benzidine). In particular, the effects of in situ oxygen plasma pretreatment of the ITO surface on interface properties are examined in detail: Organic layer-thickness dependent Kelvin probe measurements revealed a good alignment of the ITO work function and the highest occupied electronic level of the organic material in all samples. In contrast, the electrical properties of hole-only and bipolar organic diodes depend strongly on the treatment of ITO prior to organic deposition. This dependence is more pronounced for diodes made of polycrystalline CuPc than for those of amorphous {alpha}-NPD layers. X-ray diffraction and atomic force microscopic (AFM) investigations of CuPc nucleation and growth evidenced a more pronounced texture of the polycrystalline film structure on the ITO substrate that was oxygen plasma treated prior to organic layer deposition. These findings suggest that the anisotropic electrical properties of CuPc crystallites, and their orientation with respect to the substrate, strongly affect the charge carrier injection and transport properties at the anode interface. (orig.)

  4. Organic solar cells based on liquid crystalline and polycrystalline thin films

    Science.gov (United States)

    Yoo, Seunghyup

    This dissertation describes the study of organic thin-film solar cells in pursuit of affordable, renewable, and environmentally-friendly energy sources. Particular emphasis is given to the molecular ordering found in liquid crystalline or polycrystalline films as a way to leverage the efficiencies of these types of cells. Maximum efficiencies estimated based on excitonic character of organic solar cells show power conversion efficiencies larger than 10% are possible in principle. However, their performance is often limited due to small exciton diffusion lengths and poor transport properties which may be attributed to the amorphous nature of most organic semiconductors. Discotic liquid crystal (DLC) copper phthalocyanine was investigated as an easily processible building block for solar cells in which ordered molecular arrangements are enabled by a self-organization in its mesophases. An increase in photocurrent and a reduction in series resistance have been observed in a cell which underwent an annealing process. X-ray diffraction (XRD) and atomic force microscopy (AFM) measurements suggest that structural and morphological changes induced after the annealing process are related to these improvements. In an alternative approach, p-type pentacene thin films prepared by physical vapor deposition were incorporated into heterojunction solar cells with C60 as n-type layers. Power conversion efficiencies of 2.7% under broadband illumination (350--900 nm) with a peak external quantum efficiency of 58% have been achieved with the broad spectral coverage across the visible spectrum. Analysis using an exciton diffusion model shows this efficient carrier generation is mainly due to the large exciton diffusion length of pentacene films. Joint XRD and AFM studies reveal that the highly crystalline nature of pentacene films can account for the observed large exciton diffusion length. In addition, the electrical characteristics are studied as a function of light intensity using

  5. Controlled Encapsulation of Functional Organic Molecules within Metal-Organic Frameworks: In Situ Crystalline Structure Transformation.

    Science.gov (United States)

    Guan, Jinju; Hu, Yu; Wang, Yu; Li, Hongfeng; Xu, Zhiling; Zhang, Tao; Wu, Peng; Zhang, Suoying; Xiao, Gengwu; Ji, Wenlan; Li, Linjie; Zhang, Meixuan; Fan, Yun; Li, Lin; Zheng, Bing; Zhang, Weina; Huang, Wei; Huo, Fengwei

    2017-03-01

    Functional organic molecules/metal-organic frameworks composites can be obtained by in situ crystalline structure transformation from ZIF-L to ZIF-8-L under double solvent conditions. Interestingly, the as-prepared molecules/ZIF-8-L composites with the leaf-like morphology exhibit good fluorescence properties and size selectivity in fluorescent quenchers due to the molecular sieving effect of the well-defined microporous ZIF-8-L. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Formation of organic crystalline nanopillar arrays and their application to organic photovoltaic cells.

    Science.gov (United States)

    Hirade, Masaya; Nakanotani, Hajime; Yahiro, Masayuki; Adachi, Chihaya

    2011-01-01

    To enhance the performance of organic photovoltaic (OPV) cells, preparation of organic nanometer-sized pillar arrays is fascinating because a significantly large area of a donor/acceptor heterointerface having continuous conduction path to both anode and cathode electrodes can be realized. In this study, we grew cupper phthalocyanine (CuPc) crystalline nanopillar arrays by conventional thermal gradient sublimation technique using a few-nanometer-sized trigger seeds composed of a CuPc and 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA) stacked layer. We optimized the pillar density by tuning crystal growth condition in order to apply it to OPV cells.

  7. Large-area bi-component processing of organic semiconductors by spray deposition and spin coating with orthogonal solvents

    Energy Technology Data Exchange (ETDEWEB)

    Treossi, Emanuele; Liscio, Andrea; Palermo, Vincenzo [Consiglio Nazionale delle Ricerche, Istituto per la Sintesi Organica e la Fotoreattivita, Bologna (Italy); Feng, Xinliang; Muellen, Klaus [Max-Planck Institute for Polymer Research, Mainz (Germany); Samori, Paolo [Universite Louis Pasteur, Nanochemistry Laboratory, ISIS-CNRS, Strasbourg (France); Consiglio Nazionale delle Ricerche, Istituto per la Sintesi Organica e la Fotoreattivita, Bologna (Italy)

    2009-04-15

    Micrometre-thick uniform layers of a polymeric semiconductor (poly(3-hexylthiophene), P3HT) have been fabricated from solution by spray deposition making use of a commercial airbrush. Multi-scale characterization by optical microscopy and atomic force microscopy revealed the formation of smooth layers featuring reproducible patterns of spatially correlated micron-sized holes. This morphology was found to be uniform over the whole sample surface, on millimetre scale. On this micro-patterned P3HT layer an orthogonal solvent (i.e. a solvent which does not dissolve the P3HT) has been employed to deposit either by spin coating or by drop casting a second organic semiconductor. While spin-coated films exhibited nano-crystals of an alkylated perylene tetracarboxy diimide (PDI) preferentially grown into the micro-fabricated holes, drop-cast films displayed crystalline PDI fibres adsorbed on the patterned surface in random positions. (orig.)

  8. Large-area bi-component processing of organic semiconductors by spray deposition and spin coating with orthogonal solvents

    Science.gov (United States)

    Treossi, Emanuele; Liscio, Andrea; Feng, Xinliang; Palermo, Vincenzo; Müllen, Klaus; Samorì, Paolo

    2009-04-01

    Micrometre-thick uniform layers of a polymeric semiconductor (poly(3-hexylthiophene), P3HT) have been fabricated from solution by spray deposition making use of a commercial airbrush. Multi-scale characterization by optical microscopy and atomic force microscopy revealed the formation of smooth layers featuring reproducible patterns of spatially correlated micron-sized holes. This morphology was found to be uniform over the whole sample surface, on millimetre scale. On this micro-patterned P3HT layer an orthogonal solvent (i.e. a solvent which does not dissolve the P3HT) has been employed to deposit either by spin coating or by drop casting a second organic semiconductor. While spin-coated films exhibited nano-crystals of an alkylated perylene tetracarboxy diimide (PDI) preferentially grown into the micro-fabricated holes, drop-cast films displayed crystalline PDI fibres adsorbed on the patterned surface in random positions.

  9. Flexible non-volatile memory devices based on organic semiconductors

    Science.gov (United States)

    Cosseddu, Piero; Casula, Giulia; Lai, Stefano; Bonfiglio, Annalisa

    2015-09-01

    The possibility of developing fully organic electronic circuits is critically dependent on the ability to realize a full set of electronic functionalities based on organic devices. In order to complete the scene, a fundamental element is still missing, i.e. reliable data storage. Over the past few years, a considerable effort has been spent on the development and optimization of organic polymer based memory elements. Among several possible solutions, transistor-based memories and resistive switching-based memories are attracting a great interest in the scientific community. In this paper, a route for the fabrication of organic semiconductor-based memory devices with performances beyond the state of the art is reported. Both the families of organic memories will be considered. A flexible resistive memory based on a novel combination of materials is presented. In particular, high retention time in ambient conditions are reported. Complementary, a low voltage transistor-based memory is presented. Low voltage operation is allowed by an hybrid, nano-sized dielectric, which is also responsible for the memory effect in the device. Thanks to the possibility of reproducibly fabricating such device on ultra-thin substrates, high mechanical stability is reported.

  10. Organic Semiconductors based on Dyes and Color Pigments.

    Science.gov (United States)

    Gsänger, Marcel; Bialas, David; Huang, Lizhen; Stolte, Matthias; Würthner, Frank

    2016-05-01

    Organic dyes and pigments constitute a large class of industrial products. The utilization of these compounds in the field of organic electronics is reviewed with particular emphasis on organic field-effect transistors. It is shown that for most major classes of industrial dyes and pigments, i.e., phthalocyanines, perylene and naphthalene diimides, diketopyrrolopyrroles, indigos and isoindigos, squaraines, and merocyanines, charge-carrier mobilities exceeding 1 cm(2) V(-1) s(-1) have been achieved. The most widely investigated molecules due to their n-channel operation are perylene and naphthalene diimides, for which even values close to 10 cm(2) V(-1) s(-1) have been demonstrated. The fact that all of these π-conjugated colorants contain polar substituents leading to strongly quadrupolar or even dipolar molecules suggests that indeed a much larger structural space shows promise for the design of organic semiconductor molecules than was considered in this field traditionally. In particular, because many of these dye and pigment chromophores demonstrate excellent thermal and (photo-)chemical stability in their original applications in dyeing and printing, and are accessible by straightforward synthetic protocols, they bear a particularly high potential for commercial applications in the area of organic electronics.

  11. Predicting the optimal process window for the coating of single-crystalline organic films with mobilities exceeding 7 cm2/Vs.

    Science.gov (United States)

    Janneck, Robby; Vercesi, Federico; Heremans, Paul; Genoe, Jan; Rolin, Cedric

    2016-09-01

    Organic thin film transistors (OTFTs) based on single crystalline thin films of organic semiconductors have seen considerable development in the recent years. The most successful method for the fabrication of single crystalline films are solution-based meniscus guided coating techniques such as dip-coating, solution shearing or zone casting. These upscalable methods enable rapid and efficient film formation without additional processing steps. The single-crystalline film quality is strongly dependent on solvent choice, substrate temperature and coating speed. So far, however, process optimization has been conducted by trial and error methods, involving, for example, the variation of coating speeds over several orders of magnitude. Through a systematic study of solvent phase change dynamics in the meniscus region, we develop a theoretical framework that links the optimal coating speed to the solvent choice and the substrate temperature. In this way, we can accurately predict an optimal processing window, enabling fast process optimization. Our approach is verified through systematic OTFT fabrication based on films grown with different semiconductors, solvents and substrate temperatures. The use of best predicted coating speeds delivers state of the art devices. In the case of C8BTBT, OTFTs show well-behaved characteristics with mobilities up to 7 cm2/Vs and onset voltages close to 0 V. Our approach also explains well optimal recipes published in the literature. This route considerably accelerates parameter screening for all meniscus guided coating techniques and unveils the physics of single crystalline film formation.

  12. Comprehensive mass spectrometric analysis of novel organic semiconductor molecules

    Science.gov (United States)

    Prada, Svitlana

    This work presents a comprehensive mass spectrometry (MS) study of novel organic semiconductor molecules including ion mobility/reactivity measurements and trace elemental analysis. The organic molecules investigated here are important semiconductor materials for molecular electronic devices such as Organic Field-Effect Transistors (OFETs) and Light Emitted Diodes (LED). A high-performance orthogonal time-of flight mass spectrometer (TOF-MS) in combination with a matrix assisted laser desorption/ionization (MALDI) source operating at elevated pressure was used to perform MALDI/TOF analyses of pentacene and some of its derivatives with and without an added matrix. The observation of ion-molecule reactions between "cold" analyte ions and neutral analyte molecules in the gas phase has provided some insight into the mechanism of pentacene cluster formation and its functionalized derivatives. Furthermore, some of the matrices employed to assist the desorption/ionization process of these compounds were observed to influence the outcome via ion-molecule reactions of analyte ions and matrix molecules in the gas phase. The stability and reactivity of the compounds and their clusters in the MALDI plume during gas-phase expansion were evaluated; possible structures of the resulting clusters are discussed. The MALDI/TOF technique was also helpful in distinguishing between two isomeric forms of bis-[(triisopropylsilyl)-ethynyl]-pentacene. Furthermore, we reported ion mobility measurements of functionalized pentacene ions with a modified triple quadrupole mass spectrometer fitted with an ion molecule reactor (IMR). The IMR is equipped with a variable axial electrostatic drift field (ADF) and is able to trap ions for a prolong period of time. These capabilities were successfully employed in the measurement of ion mobilities in different modes of the IMR operation. Theoretical modeling of the drift dynamics and the special localization of the large ion packet was successfully

  13. Comparison of defects in crystalline oxide semiconductor materials by electron spin resonance

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Tokiyoshi, E-mail: toki@rins.ryukoku.ac.jp; Kimura, Mutsumi [Department of Electronics and Informatics, Faculty of Science and Technology, Ryukoku University, 1-438, 1-5 Yokotani, Seta Oe-Cho, Otsu, Shiga 520-2194, Japan and Joint Research Center for Science and Technology, Ryukoku University, 1-5 Yokotani, Seta Oe-Cho, Otsu, Shiga 520-2194 (Japan)

    2015-03-15

    Defects in crystalline InGaZnO{sub 4} (IGZO) induced by plasma were investigated using electron spin resonance (ESR). Thermal stabilities and g factors of two ESR signals (A and B observed at g = 1.939 and 2.003, respectively) in IGZO were different from those of the ESR signals observed in component materials such as Ga{sub 2}O{sub 3} (signal observed at g = 1.969), In{sub 2}O{sub 3} (no signal), and ZnO (signal observed at g = 1.957). Signal A in IGZO increased upon annealing at 300 °C for 1 h, but decreased when annealing was continued for more than 2 h. On the other hand, signal B decreased upon annealing at 300 °C for 1 h. The ESR signal in ZnO decayed in accordance with a second-order decay model with a rate constant of 2.1 × 10{sup −4} s{sup −1}; however, this phenomenon was not observed in other materials. This difference might have been due to randomly formed IGZO lattices such as asymmetrical (Ga, Zn)O and In-O layers. Defects in signals A and B in IGZO were formed in trap states (at the deep level) and tail states, respectively.

  14. Pressure Dependent Electronic Properties of Organic Semiconductors from First Principles

    Science.gov (United States)

    Knuth, Franz; Carbogno, Christian; Blum, Volker; Scheffler, Matthias

    2015-03-01

    The electronic properties of organic semiconductors typically exhibit a significant dependence on the strain, stress, and pressure. In this contribution, we present the theoretical background, assessment of approximations, and results of electronic and transport properties in the framework of density-functional theory. Our implementation considers the analytical strain derivatives (stress tensor) including the contributions that stem from (a) van-der-Waals interactions and (b) the Fock-exchange in hybrid functionals. We validate our approach by investigating the geometric and electronic changes that occur in polyacetylene and anthracene under hydrostatic pressure. We show that the fraction of exact exchange included in the calculations is critical - and non-trivial to choose - for a correct description of these systems. Furthermore, we point out trends for the electrical conductivity under pressure and identify the dominant charge carriers and transport directions.

  15. Potential-Dependent Generalized Einstein Relation in Disordered Organic Semiconductors

    Institute of Scientific and Technical Information of China (English)

    LU Xiao-Hong; SUN Jiu-Xun; GUO Yang; ZHANG Da

    2009-01-01

    The generalized Einstein relation (GER) is extended to consider the potential energy of carriers in an electric field (PDGER).It can be equivalently seen as the GER having position-dependent Fermi energy,and implies the organic semiconductor is in non-equilibrium under an electric field.The distribution of the carrier density with position is solved for two polymer layers.The numerical results are used to evaluate the PDGER.It is shown that the ratio of diffusion coefficient to mobility,μ/D,increases with Fermi energy and decreases with carrier density.The PDGER gives non-traditional values for the two polymer layers;the value of μ/D is small near the surface,and slightly increases as the position departs from the surface.

  16. Nonequilibrium drift-diffusion model for organic semiconductor devices

    Science.gov (United States)

    Felekidis, Nikolaos; Melianas, Armantas; Kemerink, Martijn

    2016-07-01

    Two prevailing formalisms are currently used to model charge transport in organic semiconductor devices. Drift-diffusion calculations, on the one hand, are time effective but assume local thermodynamic equilibrium, which is not always realistic. Kinetic Monte Carlo models, on the other hand, do not require this assumption but are computationally expensive. Here, we present a nonequilibrium drift-diffusion model that bridges this gap by fusing the established multiple trap and release formalism with the drift-diffusion transport equation. For a prototypical photovoltaic system the model is shown to quantitatively describe, with a single set of parameters, experiments probing (1) temperature-dependent steady-state charge transport—space-charge limited currents, and (2) time-resolved charge transport and relaxation of nonequilibrated photocreated charges. Moreover, the outputs of the developed kinetic drift-diffusion model are an order of magnitude, or more, faster to compute and in good agreement with kinetic Monte Carlo calculations.

  17. Effective Temperature and Universal Conductivity Scaling in Organic Semiconductors

    Science.gov (United States)

    Abdalla, Hassan; van de Ruit, Kevin; Kemerink, Martijn

    2015-11-01

    We investigate the scalability of the temperature- and electric field-dependence of the conductivity of disordered organic semiconductors to ‘universal’ curves by two different but commonly employed methods; by so-called universal scaling and by using the effective temperature concept. Experimentally both scaling methods were found to be equally applicable to the out-of-plane charge transport in PEDOT:PSS thin films of various compositions. Both methods are shown to be equivalent in terms of functional dependence and to have identical limiting behavior. The experimentally observed scaling behavior can be reproduced by a numerical nearest-neighbor hopping model, accounting for the Coulomb interaction, the high charge carrier concentration and the energetic disorder. The underlying physics can be captured in a simple empirical model, describing the effective temperature of the charge carrier distribution as the outcome of a heat balance between Joule heating and (effective) temperature-dependent energy loss to the lattice.

  18. Study of Fused Thiophene Based Organic Semiconductors and Interfacial Self-Assembled Monolayer (SAM) for Thin-Film Transistor (TFT) Application

    Science.gov (United States)

    Youn, Jangdae

    , the role of a thiol SAM on top of the gold electrode is investigated in terms of semiconductor film structure and OTFT performance in the bottom-contact/ bottom-gate TFT structure by using one of the most successful small molecule based n-type organic semiconductors, α,ω-diperfluorohexylquarterthiophene (DFH-4T) and N,N' bis(n-octyl)-dicyanoperylene-3,4:9,10-bis(dicarb-oximide) (PDI-8CN2). The study of semiconductor film morphogy shows that the semiconductor molecules at the gold/SAM/semiconductor interface are aligned normal to the substrate, facilitating charge transport at the interfacial region. As a result, contact resistance was minimized, and the OTFT device performance was improved. When it comes to semiconductor-dielectric interface, it is important because the charge transport layer of the OTFTs is formed within several monolayers of semiconductor films right above the gate dielectric. The physical and chemical nature of the dielectric surface significantly influences charge flow. For example, the surface of a SiO2 dielectric contains a large number of SiOH functional groups in air. After depositing semiconductor material on top of the SiO2 surface, those SiOH functional groups play a role of charge traps. One of the most effective ways of circumventing this problem is to introduce organic self-assembled monolayers (SAMs) on the SiO 2 dielectric surface. The SAMs in the semiconductor-dielectric interface not only minimize the charge traps but also improve the crystallinity of top semiconductor layers. Furthermore, the improvement of the semiconductor film microstructure depends on the structure of the SAM. When the SAM is disorganized, the size and density of crystalline domains in the semiconductor film decline. Meanwhile, the domain size and population density of crystalline domains expand when the SAM is tightly packed and vertically aligned. In this thesis, a humidity control method of fabricating high quality octadecyltrichlorosilane (OTS) SAM on SiO2

  19. Universal arrhenius temperature activated charge transport in diodes from disordered organic semiconductors

    NARCIS (Netherlands)

    Craciun, N. I.; Wildeman, J.; Blom, P. W. M.

    2008-01-01

    Charge transport models developed for disordered organic semiconductors predict a non-Arrhenius temperature dependence ln(mu) proportional to 1/T(2) for the mobility mu. We demonstrate that in space-charge limited diodes the hole mobility (mu(h)) of a large variety of organic semiconductors shows a

  20. Effect of Electric Field on Spin Polarized Current in Ferromagnetic/ Organic Semiconductor Systems

    Institute of Scientific and Technical Information of China (English)

    MA Yan-Ni; REN Jun-Feng; ZHANG Yu-Bin; LIU De-Sheng; XIE Shi-Jie

    2007-01-01

    Considering the special carriers in organic semiconductors, the spin polarized current under electric field in a ferromagnetic/organic semiconductor system is theoretically studied. Based on the spin-diffusion theory, the current spin polarization under the electric field is obtained. It is found that electric field can enhance the current spin polarization.

  1. Universal arrhenius temperature activated charge transport in diodes from disordered organic semiconductors

    NARCIS (Netherlands)

    Craciun, N. I.; Wildeman, J.; Blom, P. W. M.

    2008-01-01

    Charge transport models developed for disordered organic semiconductors predict a non-Arrhenius temperature dependence ln(mu) proportional to 1/T(2) for the mobility mu. We demonstrate that in space-charge limited diodes the hole mobility (mu(h)) of a large variety of organic semiconductors shows a

  2. Room temperature triplet state spectroscopy of organic semiconductors.

    Science.gov (United States)

    Reineke, Sebastian; Baldo, Marc A

    2014-01-21

    Organic light-emitting devices and solar cells are devices that create, manipulate, and convert excited states in organic semiconductors. It is crucial to characterize these excited states, or excitons, to optimize device performance in applications like displays and solar energy harvesting. This is complicated if the excited state is a triplet because the electronic transition is 'dark' with a vanishing oscillator strength. As a consequence, triplet state spectroscopy must usually be performed at cryogenic temperatures to reduce competition from non-radiative rates. Here, we control non-radiative rates by engineering a solid-state host matrix containing the target molecule, allowing the observation of phosphorescence at room temperature and alleviating constraints of cryogenic experiments. We test these techniques on a wide range of materials with functionalities spanning multi-exciton generation (singlet exciton fission), organic light emitting device host materials, and thermally activated delayed fluorescence type emitters. Control of non-radiative modes in the matrix surrounding a target molecule may also have broader applications in light-emitting and photovoltaic devices.

  3. Tuning the crystal polymorphs of organic semiconductor towards high performance organic transistors (Conference Presentation)

    Science.gov (United States)

    Zhen, Yonggang; He, Ping; Yi, Yuanping; Hu, Wenping

    2016-11-01

    Generally, the differences in crystal polymorph exhibit different narrow band structures, electron-phonon coupling, optoelectronic characteristics and charge transport properties, thus leading to different device performances of organic semiconductors for application in organic field-effect transistors (OFETs). Nowadays it still remains a big challenge to control organic crystal polymorph because the slight non-directional intermolecular interactions lead to the very small differences instructure and energy of cystal phases with several alternative packing arrangements. Therefore, the control of the crystal polymorphism towards high device performance has become a crucial issue in the field of organic semiconductors. Thienoacenes have been intensively investigated as very promising organic semiconductors with high stability and superior mobility for OFETs in the last decade. However, scare studies focused on the crystal polymorph of thienoacenes. Herein, we report the controllable growth of different crystal phases of dihexyl-substituted dibenzo[d,d']thieno[3,2-b;4,5-b']dithiophene (C6-DBTDT), which was synthesized in a new, facile and efficient method. Furthermore, OFETs based on microribbon-shaped β phase crystals showed the hole mobility up to 18.9 cm2 V-1 s-1, which is one of the highest value for p-type organic semiconductors measured under ambient conditions, while platelet-shaped α phase crystals displayed the lower hole mobility of 8.5 cm2 V-1 s-1. We clearly demonstrated that the selective growth of different crystal polymorph for C6-DBTDT can be achieved by using different substrate and solvents. The simple drop-cast fabrication with controllable crystal phase and air operation stability would open the possibility of thienoacene derivatives in the construction of micro- and nanoelectronics.

  4. Organic semiconductor nickel phthalocyanine-based photocapacitive and photoresistive detector

    Science.gov (United States)

    Shah, Mutabar; Karimov, Kh S.; Sayyad, M. H.

    2010-07-01

    In this study, the photosensitive organic semiconductor nickel phthalocyanine (NiPc) is investigated as a photocapacitive and photoresistive detector. NiPc thin film is grown by vacuum thermal evaporation on an indium tin oxide (ITO)-coated glass substrate. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is deposited as a top electrode by drop-casting to fabricate the ITO/NiPc/PEDOT:PSS light detector. It has been observed that under the unmodulated filament lamp illumination of up to 9720 lux the capacitance of the detectors increased up to 21, 18 and 4% at a frequency of measuring voltage of 120 Hz, 1 kHz and 10 kHz, respectively, under dark conditions. The change in resistance with the variation in the intensity of light is also investigated. The capacitance and resistance of the light detector decrease with an increase in the frequency. It is assumed that the photocapacitive and photoresistive response of the detector is associated with polarization occurring due to the transfer of photo-generated electrons and holes. The calculated results are in reasonable agreement with the experimental results.

  5. Small molecule semiconductors for high-efficiency organic photovoltaics.

    Science.gov (United States)

    Lin, Yuze; Li, Yongfang; Zhan, Xiaowei

    2012-06-01

    Organic photovoltaic cells (OPVs) are a promising cost-effective alternative to silicon-based solar cells, and possess light-weight, low-cost, and flexibility advantages. Significant progress has been achieved in the development of novel photovoltaic materials and device structures in the last decade. Nowadays small molecular semiconductors for OPVs have attracted considerable attention, due to their advantages over their polymer counterparts, including well-defined molecular structure, definite molecular weight, and high purity without batch to batch variations. The highest power conversion efficiencies of OPVs based on small molecular donor/fullerene acceptors or polymeric donor/fullerene acceptors are up to 6.7% and 8.3%, respectively, and meanwhile nonfullerene acceptors have also exhibited some promising results. In this review we summarize the developments in small molecular donors, acceptors (fullerene derivatives and nonfullerene molecules), and donor-acceptor dyad systems for high-performance multilayer, bulk heterojunction, and single-component OPVs. We focus on correlations of molecular chemical structures with properties, such as absorption, energy levels, charge mobilities, and photovoltaic performances. This structure-property relationship analysis may guide rational structural design and evaluation of photovoltaic materials (253 references).

  6. Controlling the Spatial Organization of Liquid Crystalline Nanoparticles by Composition of the Organic Grafting Layer.

    Science.gov (United States)

    Wójcik, Michał M; Olesińska, Magdalena; Sawczyk, Michał; Mieczkowski, Józef; Górecka, Ewa

    2015-07-01

    Understanding how the spatial ordering of liquid crystalline nanoparticles can be controlled by different factors is of great importance in the further development of their photonic applications. In this paper, we report a new key parameter to control the mesogenic behavior of gold nanoparticles modified by rodlike thiols. An efficient method to control the spatial arrangement of hybrid nanoparticles in a condensed state is developed by changing the composition of the mesogenic grafting layer on the surface of the nanoparticles. The composition can be tuned by different conditions of the ligand exchange reaction. The thermal and optical behavior of the mesogenic and promesogenic ligands were investigated by using differential scanning calorimetry (DSC) and hot-stage polarized optical microscopy. The chemical structure of the synthesized hybrid nanoparticles was characterized by (1) H NMR spectroscopy, thermogravimetric analysis (TGA), XPS, and elemental analysis, whereas the superstructures were examined by small-angle X-ray diffraction (SAXSRD) analysis. Structural studies showed that the organic sublayer made of mesogenic ligands is denser with an increasing the average ligand number, thereby separating the nanoparticles in the liquid crystalline phases, which changes the parameters of these phases.

  7. Anion-directed self-organization of thermotropic liquid crystalline materials containing a guanidinium moiety.

    Science.gov (United States)

    Kim, Dongwoo; Jon, Sangyong; Lee, Hyung-Kun; Baek, Kangkyun; Oh, Nam-Keun; Zin, Wang-Cheol; Kim, Kimoon

    2005-11-28

    New wedge-shaped thermotropic liquid crystalline materials containing a guanidinium moiety at the apex organize into various supramolecular structures such as hexagonal columnar, rectangular columnar and Pm3n cubic mesophases depending on anions illustrating guest-directed self-organization in mesophases.

  8. Tuning polymorphism and orientation in organic semiconductor thin films via post-deposition processing.

    Science.gov (United States)

    Hiszpanski, Anna M; Baur, Robin M; Kim, Bumjung; Tremblay, Noah J; Nuckolls, Colin; Woll, Arthur R; Loo, Yueh-Lin

    2014-11-05

    Though both the crystal structure and molecular orientation of organic semiconductors are known to impact charge transport in thin-film devices, separately accessing different polymorphs and varying the out-of-plane molecular orientation is challenging, typically requiring stringent control over film deposition conditions, film thickness, and substrate chemistry. Here we demonstrate independent tuning of the crystalline polymorph and molecular orientation in thin films of contorted hexabenzocoronene, c-HBC, during post-deposition processing without the need to adjust deposition conditions. Three polymorphs are observed, two of which have not been previously reported. Using our ability to independently tune the crystal structure and out-of-plane molecular orientation in thin films of c-HBC, we have decoupled and evaluated the effects that molecular packing and orientation have on device performance in thin-film transistors (TFTs). In the case of TFTs comprising c-HBC, polymorphism and molecular orientation are equally important; independently changing either one affects the field-effect mobility by an order of magnitude.

  9. Preparations and Characterizations of Luminescent Two Dimensional Organic-inorganic Perovskite Semiconductors

    Directory of Open Access Journals (Sweden)

    Sanjun Zhang

    2010-05-01

    Full Text Available This article reviews the synthesis, structural and optical characterizations of some novel luminescent two dimensional organic-inorganic perovskite (2DOIP semiconductors. These 2DOIP semiconductors show a self-assembled nano-layered structure, having the electronic structure of multi-quantum wells. 2DOIP thin layers and nanoparticles have been prepared through different methods. The structures of the 2DOIP semiconductors are characterized by atomic force microscopy and X-ray diffraction. The optical properties of theb DOIP semiconductors are characterized from absorption and photoluminescence spectra measured at room and low temperatures. Influences of different components, in particular the organic parts, on the structural and optical properties of the 2DOIP semiconductors are discussed.

  10. Controlled Growth of Ultrathin Film of Organic Semiconductors by Balancing the Competitive Processes in Dip-Coating for Organic Transistors.

    Science.gov (United States)

    Wu, Kunjie; Li, Hongwei; Li, Liqiang; Zhang, Suna; Chen, Xiaosong; Xu, Zeyang; Zhang, Xi; Hu, Wenping; Chi, Lifeng; Gao, Xike; Meng, Yancheng

    2016-06-28

    Ultrathin film with thickness below 15 nm of organic semiconductors provides excellent platform for some fundamental research and practical applications in the field of organic electronics. However, it is quite challenging to develop a general principle for the growth of uniform and continuous ultrathin film over large area. Dip-coating is a useful technique to prepare diverse structures of organic semiconductors, but the assembly of organic semiconductors in dip-coating is quite complicated, and there are no reports about the core rules for the growth of ultrathin film via dip-coating until now. In this work, we develop a general strategy for the growth of ultrathin film of organic semiconductor via dip-coating, which provides a relatively facile model to analyze the growth behavior. The balance between the three direct factors (nucleation rate, assembly rate, and recession rate) is the key to determine the growth of ultrathin film. Under the direction of this rule, ultrathin films of four organic semiconductors are obtained. The field-effect transistors constructed on the ultrathin film show good field-effect property. This work provides a general principle and systematic guideline to prepare ultrathin film of organic semiconductors via dip-coating, which would be highly meaningful for organic electronics as well as for the assembly of other materials via solution processes.

  11. Organic functionalization of group IV semiconductor surfaces: principles, examples, applications, and prospects

    Science.gov (United States)

    Bent, Stacey F.

    2002-03-01

    Organic functionalization is emerging as an important area in the development of new semiconductor-based materials and devices. Direct, covalent attachment of organic layers to a semiconductor interface provides for the incorporation of many new properties, including lubrication, optical response, chemical sensing, or biocompatibility. Methods by which to incorporate organic functionality to the surfaces of semiconductors have seen immense progress in recent years, and in this article several of these approaches are reviewed. Examples are included from both dry and wet processing environments. The focus of the article is on attachment strategies that demonstrate the molecular nature of the semiconductor surface. In many cases, the surfaces mimic the reactivity of their molecular carbon or organosilane counterparts, and examples of functionalization reactions are described in which direct analogies to textbook organic and inorganic chemistry can be applied. This article addresses the expected impact of these functionalization strategies on emerging technologies in nanotechnology, sensing, and bioengineering.

  12. Understanding electrical-thermal transport characteristics of organic semiconductors: Violation of Wiedemann-Franz law

    Science.gov (United States)

    Lu, Nianduan; Li, Ling; Gao, Nan; Liu, Ming

    2016-11-01

    Organic semiconductors exhibit plenty of attractive properties for use as thermoelectric elements. A comprehensive understanding for the electrical-thermal transport characteristics is crucial to design and fabricate the thermoelectric device. We proposed a theoretical model to investigate the electrical conductivity and the electronic thermal conductivity of organic semiconductors based on the hopping transport mechanism. The electrical-thermal transport characteristics of organic semiconductors have been analyzed in detail and compared with the experimental results and Monte Carlo simulation. The Wiedemann-Franz law, connecting the electronic thermal conductivity to the electrical conductivity of organic semiconductors, is generally found to be strongly violated under the effect of temperature, carrier concentration, energetic disorder and electric field.

  13. Nanoscale contacts to organic molecules based on layered semiconductor substrates

    Energy Technology Data Exchange (ETDEWEB)

    Strobel, Sebastian

    2009-06-15

    This work reports on the integration of organic molecules as nanoelectronic device units on semiconductor substrates. Two novel preparation methods for sub-10-nm separated metal electrodes are presented using current microelectronics process technology. The first method utilises AlGaAs/GaAs heterostructures grown by molecular beam epitaxy (MBE) as mold to create planar metal electrodes employing a newly developed, high resolution nanotransfer printing (nTP) process. The second method uses commercially available Silicon-on-Insulator (SOI) substrates as base material for the fabrication of nanogap electrode devices. This sandwich-like material stack consists of a silicon substrate, a thin silicon oxide layer, and a capping silicon layer on top. Electronic transport measurements verified their excellent electrical properties at liquid helium temperatures. Specifically tailored nanogap devices featured an electrode insulation in the GW range even up to room temperature as well as within aqueous electrolyte solution. Finally, the well defined layer architecture facilitated the fabrication of electrodes with gap separations below-10-nm to be directly bridged by molecules. Approximately 12-nm-long conjugated molecules with extended -electron system were assembled onto the devices from solution. A large conductance gap was observed with a steep increase in current at a bias voltage of V{sub T}{approx}{+-}1.5 V. Theoretical calculations based on density functional theory and non-equilibrium Green's function formalism confirmed the measured non-linear IV-characteristics qualitatively and lead to the conclusion that the conductance gap mainly originates from the oxygen containing linker. Temperature dependent investigations of the conductance indicated a hopping charge transport mechanism through the central part of the molecule for bias voltages near but below V{sub T}. (orig.)

  14. Applications of confocal laser scanning microscopy in research into organic semiconductor thin films

    DEFF Research Database (Denmark)

    Schiek, Manuela; Balzer, Frank

    2014-01-01

    At the center of opto-electronic devices are thin layers of organic semiconductors, which need to be sandwiched between planar electrodes. With the growing demand for opto-electronic devices now and in the future, new electrode materials are needed to meet the requirements of organic semiconductors...... laser scanning microscopy has emerged as a versatile tool for optical metrology while atomic force microscopy adds detailed structural information....

  15. Exploring the electronic structure of an organic semiconductor based on a compactly fused electron donor-acceptor molecule.

    Science.gov (United States)

    Alemany, Pere; Canadell, Enric; Geng, Yan; Hauser, Jürg; Macchi, Piero; Krämer, Karl; Decurtins, Silvio; Liu, Shi-Xia

    2015-05-18

    A Mott-type semiconductor based on a compactly fused and partially oxidized electron donor-acceptor (D-A) molecule was recently prepared and identified to exhibit a large room-temperature conductivity of 2 S cm(-1) . In a marked contrast to the organic conductors characterized by relatively well decoupled and segregated uniform stacks of D and A moieties, the formally half-oxidized tetrathiafulvalene donors of the actual compound are organized in columnar π stacks only, whereby the coplanar electron-acceptor units, namely benzothiadiazole, are closely annulated along their ridges. Herein, we present a theoretical study that explores the electronic structure of this novel type of organic semiconductor. The highly symmetric-solid state material behaves as a one-dimensional electronic system with strong antiferromagnetic interactions (coupling constant>200 cm(-1) ). The unique shape and local dipole of this redox-active fused electron D-A molecule lays the basis for further investigations of the collective electronic structure, mainly in the function of different counterions embedded in the crystalline lattice. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Ambipolar Small-Molecule:Polymer Blend Semiconductors for Solution-Processable Organic Field-Effect Transistors.

    Science.gov (United States)

    Kang, Minji; Hwang, Hansu; Park, Won-Tae; Khim, Dongyoon; Yeo, Jun-Seok; Kim, Yunseul; Kim, Yeon-Ju; Noh, Yong-Young; Kim, Dong-Yu

    2017-01-25

    We report on the fabrication of an organic thin-film semiconductor formed using a blend solution of soluble ambipolar small molecules and an insulating polymer binder that exhibits vertical phase separation and uniform film formation. The semiconductor thin films are produced in a single step from a mixture containing a small molecular semiconductor, namely, quinoidal biselenophene (QBS), and a binder polymer, namely, poly(2-vinylnaphthalene) (PVN). Organic field-effect transistors (OFETs) based on QBS/PVN blend semiconductor are then assembled using top-gate/bottom-contact device configuration, which achieve almost four times higher mobility than the neat QBS semiconductor. Depth profile via secondary ion mass spectrometry and atomic force microscopy images indicate that the QBS domains in the films made from the blend are evenly distributed with a smooth morphology at the bottom of the PVN layer. Bias stress test and variable-temperature measurements on QBS-based OFETs reveal that the QBS/PVN blend semiconductor remarkably reduces the number of trap sites at the gate dielectric/semiconductor interface and the activation energy in the transistor channel. This work provides a one-step solution processing technique, which makes use of soluble ambipolar small molecules to form a thin-film semiconductor for application in high-performance OFETs.

  17. Photoelectron spectroscopy on doped organic semiconductors and related interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Olthof, Selina Sandra

    2010-06-08

    Using photoelectron spectroscopy, we show measurements of energy level alignment of organic semiconducting layers. The main focus is on the properties and the influence of doped layers. The investigations on the p-doping process in organic semiconductors show typical charge carrier concentrations up to 2.10{sup 20} cm{sup -3}. By a variation of the doping concentration, an over proportional influence on the position of the Fermi energy is observed. Comparing the number of charge carriers with the amount of dopants present in the layer, it is found that only 5% of the dopants undergo a full charge transfer. Furthermore, a detailed investigation of the density of states beyond the HOMO onset reveals that an exponentially decaying density of states reaches further into the band gap than commonly assumed. For an increasing amount of doping, the Fermi energy gets pinned on these states which suggests that a significant amount of charge carriers is present there. The investigation of metal top and bottom contacts aims at understanding the asymmetric current-voltage characteristics found for some symmetrically built device stacks. It can be shown that a reaction between the atoms from the top contact with the molecules of the layer leads to a change in energy level alignment that produces a 1.16 eV lower electron injection barrier from the top. Further detailed investigations on such contacts show that the formation of a silver top contact is dominated by diffusion processes, leading to a broadened interface. However, upon insertion of a thin aluminum interlayer this diffusion can be stopped and an abrupt interface is achieved. Furthermore, in the case of a thick silver top contact, a monolayer of molecules is found to oat on top of the metal layer, almost independent on the metal layer thickness. Finally, several device stacks are investigated, regarding interface dipoles, formation of depletion regions, energy alignment in mixed layers, and the influence of the built

  18. Electrical analysis of high dielectric constant insulator and metal gate metal oxide semiconductor capacitors on flexible bulk mono-crystalline silicon

    KAUST Repository

    Ghoneim, Mohamed T.

    2015-06-01

    We report on the electrical study of high dielectric constant insulator and metal gate metal oxide semiconductor capacitors (MOSCAPs) on a flexible ultra-thin (25 μm) silicon fabric which is peeled off using a CMOS compatible process from a standard bulk mono-crystalline silicon substrate. A lifetime projection is extracted using statistical analysis of the ramping voltage (Vramp) breakdown and time dependent dielectric breakdown data. The obtained flexible MOSCAPs operational voltages satisfying the 10 years lifetime benchmark are compared to those of the control MOSCAPs, which are not peeled off from the silicon wafer. © 2014 IEEE.

  19. Integration of crystalline orientated γ-Al2O3 films and complementary metal-oxide-semiconductor circuits on Si(1 0 0) substrate

    Science.gov (United States)

    Oishi, Koji; Akai, Daisuke; Ishida, Makoto

    2015-01-01

    In this paper, integration of crystalline orientated γ-Al2O3 films and complementary metal-oxide-semiconductor (CMOS) circuits on Si(1 0 0) substrate was reported. In this integration processes, crystalline γ-Al2O3 films need to be preserved their crystallinity during high temperature annealing processes of CMOS fabrication in order to prevent surface condition changes. The γ-Al2O3 films grown on Si substrates are annealed in the CMOS fabrication process conditions, drive-in annealing at 1150 °C in O2 atmosphere and wet annealing 1000 °C in H2O vapor atmosphere. Reflection high energy electron diffraction (RHEED) and x-ray diffraction (XRD) were used to characterize the crystallinity of γ-Al2O3 films after the annealing processes. Surface conditions of the films are analyzed and observed with X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM). As a result, RHEED patterns of the γ-Al2O3 films indicated that wet oxidation annealing was a critical process severally inferior surface condition of crystalline γ-Al2O3 films. XRD, XPS, and SEM investigation unveiled further details of the crystallinity changes on γ-Al2O3 films for each process. These results indicated passivation films were required to integrate γ-Al2O3 films with CMOS fabrication process. Therefore we proposed and introduced Si3N4/TEOS passivation films on γ-Al2O3 films in CMOS fabrication processes. At last, MOSFETs on γ-Al2O3 integrated Si(1 0 0) substrate were fabricated and characterized. The designed characteristics of MOSFETs were obtained on γ-Al2O3 integrated Si substrate.

  20. Determination of the transport levels in thin films of organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Krause, Stefan

    2009-07-27

    The approach of using the combination of Ultraviolet (UPS) and Inverse Photoemission (IPS) to determine the transport levels in thin films of organic semiconductors is the scope of this work. For this matter all influences on the peak position and width in Photoelectron Spectroscopy are discussed with a special focus on organic semiconductors. Many of these influences are shown with experimental results of the investigation of diindenoperylene on Ag(111). These findings are applied to inorganic semiconductors silicon in order to establish the use of UPS and IPS on a well-understood system. Finally, the method is used to determine the transport level of several organic semiconductors (PTCDA, Alq3, CuPc, DIP, PBI-H4) and the corresponding exciton binding energies are calculated by comparison to optical absorption data. (orig.)

  1. Study of charge-carrier relaxation in a disordered organic semiconductor by simulating impedance spectroscopy

    Science.gov (United States)

    Mesta, M.; Cottaar, J.; Coehoorn, R.; Bobbert, P. A.

    2014-05-01

    Impedance spectroscopy is a very sensitive probe of nonstationary charge transport governed by charge-carrier relaxation in devices of disordered organic semiconductors. We simulate impedance spectroscopy measurements of hole-only devices of a polyfluorene-based disordered organic semiconductor by solving a time-dependent three-dimensional master equation for the occupational probabilities of transport sites in the semiconductor. We focus on the capacitance-voltage characteristics at different frequencies. In order to obtain good agreement with the measured characteristics, we have to assume a lower strength of a Gaussian energy disorder than obtained from best fits to the stationary current density-voltage characteristics. This lower disorder strength is in agreement with dark-injection studies of nonstationary charge transport on the same devices. The results add to solving the puzzle of reconciling nonstationary with stationary charge-transport studies of disordered organic semiconductors.

  2. Carrier mobility in mesoscale heterogeneous organic materials: Effects of crystallinity and anisotropy on efficient charge transport

    Science.gov (United States)

    Kobayashi, Hajime; Shirasawa, Raku; Nakamoto, Mitsunori; Hattori, Shinnosuke; Tomiya, Shigetaka

    2017-07-01

    Charge transport in the mesoscale bulk heterojunctions (BHJs) of organic photovoltaic devices (OPVs) is studied using multiscale simulations in combination with molecular dynamics, the density functional theory, the molecular-level kinetic Monte Carlo (kMC) method, and the coarse-grained kMC method, which was developed to estimate mesoscale carrier mobility. The effects of the degree of crystallinity and the anisotropy of the conductivity of donors on hole mobility are studied for BHJ structures that consist of crystalline and amorphous pentacene grains that act as donors and amorphous C60 grains that act as acceptors. We find that the hole mobility varies dramatically with the degree of crystallinity of pentacene because it is largely restricted by a low-mobility amorphous region that occurs in the hole transport network. It was also found that the percolation threshold of crystalline pentacene is relatively high at approximately 0.6. This high percolation threshold is attributed to the 2D-like conductivity of crystalline pentacene, and the threshold is greatly improved to a value of approximately 0.3 using 3D-like conductive donors. We propose essential guidelines to show that it is critical to increase the degree of crystallinity and develop 3D conductive donors for efficient hole transport through percolative networks in the BHJs of OPVs.

  3. Hydrogen-Bonded Organic Frameworks (HOFs): A New Class of Porous Crystalline Proton-Conducting Materials.

    Science.gov (United States)

    Karmakar, Avishek; Illathvalappil, Rajith; Anothumakkool, Bihag; Sen, Arunabha; Samanta, Partha; Desai, Aamod V; Kurungot, Sreekumar; Ghosh, Sujit K

    2016-08-26

    Two porous hydrogen-bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra-high proton conduction values (σ) 0.75× 10(-2)  S cm(-1) and 1.8×10(-2)  S cm(-1) under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic-based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen-bonded porous organic frameworks as solid-state proton conducting materials.

  4. Real-Time Tracking of Singlet Exciton Diffusion in Organic Semiconductors

    NARCIS (Netherlands)

    Kozlov, Oleg V.; de Haan, Foppe; Kerner, Ross A.; Rand, Barry P.; Cheyns, David; Pshenichnikov, Maxim S.

    2016-01-01

    Exciton diffusion in organic materials provides the operational basis for functioning of such devices as organic solar cells and light-emitting diodes. Here we track the exciton diffusion process in organic semiconductors in real time with a novel technique based on femtosecond photoinduced absorpti

  5. Preparation of electron buffer layer with crystalline ZnO nanoparticles in inverted organic photovoltaic cells

    Science.gov (United States)

    Lee, Donghwan; Kang, Taeho; Choi, Yoon-Young; Oh, Seong-Geun

    2017-06-01

    Zinc oxide (ZnO) nanoparticles synthesized through sol-gel method were used to fabricate the electron buffer layer in inverted organic photovoltaic cells (OPVs) after thermal treatment. To investigate the effect of thermal treatment on the formation of crystalline ZnO nanoparticles, the amorphous ZnO nanoparticles were treated via hydrothermal method. The crystalline phase of ZnO with well-ordered structure could be obtained when the amorphous phase of ZnO was processed under hydrothermal treatment at 170 °C. The crystalline structure of ZnO thin film in inverted organic solar cell could be obtained under relatively low annealing temperature by using thermally treated ZnO nanoparticles. The OPVs fabricated by using crystalline ZnO nanoparticles for electron buffer layer exhibited higher efficiency than the conventional ZnO nanoparticles. The best power conversion efficiency (PCE) was achieved for 7.16% through the ZnO film using the crystalline ZnO nanoparticles. The proposed method to prepared ZnO nanoparticles (NPs) could effectively reduce energy consumption during the fabrication of OPVs, which would greatly contribute to advantages such as lower manufacturing costs, higher productivity and application on flexible substrates.

  6. Validity of the einstein relation in disordered organic semiconductors

    NARCIS (Netherlands)

    Wetzelaer, G.A.H.; Koster, L.J.A.; Blom, P.W.M.

    2011-01-01

    It is controversial whether energetic disorder in semiconductors is already sufficient to violate the classical Einstein relation, even in the case of thermal equilibrium. We demonstrate that the Einstein relation is violated only under nonequilibrium conditions due to deeply trapped carriers, as in

  7. Self-organizing nanochannel networks in periodically perforated semiconductor films

    NARCIS (Netherlands)

    Annabattula, R. K.; Onck, P. R.

    2011-01-01

    In this paper we theoretically analyze the mechanism of nanochannel formation by an evolutionary etching process in periodically perforated semiconductor films. The compressive stresses due to lattice mismatch of the epitaxially grown nanoscale films are gradually relaxed; leading to an evolutionary

  8. Covalent organic frameworks with spatially confined guest molecules in nanochannels and their impacts on crystalline structures.

    Science.gov (United States)

    Gao, Jia; Jiang, Donglin

    2016-01-25

    We demonstrate the profound effects of spatially confined guest molecules in one-dimensional nanochannels on X-ray diffraction behaviors of covalent organic frameworks. Our results give insights into the abnormal X-ray diffraction patterns and suggest a novel molecular dynamic strategy for resolving crystalline structures.

  9. Crystalline organization of a methanofullerene as used for plastic solar-cell applications

    NARCIS (Netherlands)

    Yang, X.; van Duren, JKJ; Rispens, M. T.; Hummelen, J. C.; Janssen, Rene A.J.; Michels, Matthias A.J.

    2004-01-01

    Crystalline organization of a methano-fullerene, [6,6]-phenyl C-61 butyric acid methyl ester (PCBM), as achieved in various thin-film deposition techniques, is reported. Mechanically stable, and thus self-supporting, thin films obtained via fast solvent evaporation techniques are found to be

  10. Crystalline organization of a methanofullerene as used for plastic solar-cell applications

    NARCIS (Netherlands)

    Yang, XN; van Duren, JKJ; Rispens, MT; Hummelen, JC; Janssen, RAJ; Michels, MAJ; Yang, Xiaoniu; Janssen, Rene A.J.; Michels, Matthias A.J.

    2004-01-01

    Crystalline organization of a methano-fullerene, [6,6]-phenyl C-61 butyric acid methyl ester (PCBM), as achieved in various thin-film deposition techniques, is reported. Mechanically stable, and thus self-supporting, thin films obtained via fast solvent evaporation techniques are found to be compose

  11. Crystalline organization of a methanofullerene as used for plastic solar-cell applications

    NARCIS (Netherlands)

    Yang, X.; van Duren, JKJ; Rispens, M. T.; Hummelen, J. C.; Janssen, Rene A.J.; Michels, Matthias A.J.

    2004-01-01

    Crystalline organization of a methano-fullerene, [6,6]-phenyl C-61 butyric acid methyl ester (PCBM), as achieved in various thin-film deposition techniques, is reported. Mechanically stable, and thus self-supporting, thin films obtained via fast solvent evaporation techniques are found to be compose

  12. Local excitation of surface plasmon polaritons by second-harmonic generation in crystalline organic nanofibers

    DEFF Research Database (Denmark)

    Skovsen, Esben; Søndergaard, Thomas; Fiutowski, Jacek

    2012-01-01

    Coherent local excitation of surface plasmon polaritons (SPPs) by second-harmonic generation (SHG) in aligned crystalline organic functionalized para-phenylene nanofibers deposited on a thin silver film is demonstrated. The excited SPPs are characterized using angle-resolved leakage radiation...

  13. Tetracene dicarboxylic imide and its disulfide: synthesis of ambipolar organic semiconductors for organic photovoltaic cells.

    Science.gov (United States)

    Okamoto, Toshihiro; Suzuki, Tsuyoshi; Tanaka, Hideyuki; Hashizume, Daisuke; Matsuo, Yutaka

    2012-01-02

    We have designed and synthesized a new donor/acceptor-type tetracene derivative by the introduction of dicarboxylic imide and disulfide groups as electron-withdrawing and -donating units, respectively. The prepared compounds, tetracene dicarboxylic imide (TI) and its disulfide (TIDS) have high chemical and electrochemical stability as well as long-wavelength absorptions of up to 886 nm in the thin films. The crystal packing structure of TIDS molecules features face-to-face π-stacking, derived from dipole-dipole interactions. Notably, TIDS exhibited ambipolar properties of both electron-donating and -accepting natures in p-n and p-i-n heterojunction organic thin-film photovoltaic devices. Accordingly, TI and TIDS are expected to be promising compounds for designing new organic semiconductors.

  14. Identification of an organic semiconductor superlattice structure of pentacene and perfluoro-pentacene through resonant and non-resonant X-ray scattering

    Energy Technology Data Exchange (ETDEWEB)

    Kowarik, S.; Weber, C. [Humboldt-Universität zu Berlin, Institut für Physik, Newtonstr. 15, 12489 Berlin (Germany); Hinderhofer, A.; Gerlach, A.; Schreiber, F. [Universität Tübingen, Institut für Angewandte Physik, Auf der Morgenstelle 10, 72076 Tübingen (Germany); Wang, C.; Hexemer, A. [Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Leone, S. R. [Departments of Chemistry and Physics, University of California, and Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)

    2015-11-15

    Highly crystalline and stable molecular superlattices are grown with the smallest possible stacking period using monolayers (MLs) of the organic semiconductors pentacene (PEN) and perfluoro-pentacene (PFP). Superlattice reflections in X-ray reflectivity and their energy dependence in resonant soft X-ray reflectivity measurements show that PFP and PEN MLs indeed alternate even though the coherent ordering is lost after ∼ 4 ML. The observed lattice spacing of 15.9 Å in the superlattice is larger than in pure PEN and PFP films, presumably because of more upright standing molecules and lack of interdigitation between the incommensurate crystalline PEN and PFP layers. The findings are important for the development of novel organic quantum optoelectronic devices.

  15. Identification of an organic semiconductor superlattice structure of pentacene and perfluoro-pentacene through resonant and non-resonant X-ray scattering

    Directory of Open Access Journals (Sweden)

    S. Kowarik

    2015-11-01

    Full Text Available Highly crystalline and stable molecular superlattices are grown with the smallest possible stacking period using monolayers (MLs of the organic semiconductors pentacene (PEN and perfluoro-pentacene (PFP. Superlattice reflections in X-ray reflectivity and their energy dependence in resonant soft X-ray reflectivity measurements show that PFP and PEN MLs indeed alternate even though the coherent ordering is lost after ∼ 4 ML. The observed lattice spacing of 15.9 Å in the superlattice is larger than in pure PEN and PFP films, presumably because of more upright standing molecules and lack of interdigitation between the incommensurate crystalline PEN and PFP layers. The findings are important for the development of novel organic quantum optoelectronic devices.

  16. High-Crystallinity Covalent Organic Framework with Dual Fluorescence Emissions and Its Ratiometric Sensing Application.

    Science.gov (United States)

    Qian, Hai-Long; Dai, Cong; Yang, Cheng-Xiong; Yan, Xiu-Ping

    2017-07-26

    High crystallinity of covalent organic frameworks (COFs) with dual fluorescence emissions has not been reported so far. Here, we show the rational design and preparation of high-crystallinity COF TzDa via the synergetic interaction of docking sites and hydrogen bonds: 4,4',4″-(1,3,5-Triazine-2,4,6-triyl)trianiline (Tz) with the docking site and 2,5-dihydroxyterephthalaldehyde (Da) with the OH group are employed to synthesize the imine-linked two-dimensional high-crystallinity layered structure TzDa. The prepared mesoporous TzDa (ca. 36 Å) exhibits high thermal and chemical stability. The intramolecular charge transfer (ICT) and excited-state intramolecular proton transfer (ESIPT) effects bring TzDa two main fluorescence emissions around 500 and 590 nm. Water molecules can interfere with the ICT and ESIPT effects, allowing the development of a ratiometric fluorescent sensor for water in organic solvents. The proposed sensor shows high sensitivity to trace water in conventional organic solvents. The high stability of TzDa allows its recyclable uses for trace water detection. This work not only offers a platform for the construction of high-crystallinity COFs, but also provides a rational design of COFs with dual fluorescence emissions for ratiometric sensing applications.

  17. All-polymer organic semiconductor laser chips: Parallel fabrication and encapsulation

    DEFF Research Database (Denmark)

    Vannahme, Christoph; Klinkhammer, Sönke; Christiansen, Mads Brøkner

    2010-01-01

    Organic semiconductor lasers are of particular interest as tunable visible laser light sources. For bringing those to market encapsulation is needed to ensure practicable lifetimes. Additionally, fabrication technologies suitable for mass production must be used. We introduce all-polymer chips...... comprising encapsulated distributed feedback organic semiconductor lasers. Several chips are fabricated in parallel by thermal nanoimprint of the feedback grating on 4? wafer scale out of poly(methyl methacrylate) (PMMA) and cyclic olefin copolymer (COC). The lasers consisting of the organic semiconductor...... tris(8- hydroxyquinoline) aluminum (Alq3) doped with the laser dye 4-dicyanomethylene-2- methyl-6-(p-dimethylaminostyril)-4H-pyrane (DCM) are hermetically sealed by thermally bonding a polymer lid. The organic thin film is placed in a basin within the substrate and is not in direct contact to the lid...

  18. Spectroscopy of Charge Carriers and Traps in Field-Doped Organic Semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Xiaoyang; Frisbie, C Daniel

    2012-08-13

    This research project aims to achieve quantitative and molecular level understanding of charge carriers and traps in field-doped organic semiconductors via in situ optical absorption spectroscopy, in conjunction with time-resolved electrical measurements. During the funding period, we have made major progress in three general areas: (1) probed charge injection at the interface between a polymeric semiconductor and a polymer electrolyte dielectric and developed a thermodynamic model to quantitatively describe the transition from electrostatic to electrochemical doping; (2) developed vibrational Stark effect to probe electric field at buried organic semiconductor interfaces; (3) used displacement current measurement (DCM) to study charge transport at organic/dielectric interfaces and charge injection at metal/organic interfaces.

  19. Effect of Carrier Differences on Spin Polarized Injection into Organic and Inorganic Semiconductors

    Institute of Scientific and Technical Information of China (English)

    REN Jun-Feng; XIU Ming-Xia

    2008-01-01

    Spin polarized injection into organic and inorganic semiconductors are studied theoretically from the spin diffusion theory and Ohm's law, and the emphases are placed on the effect of the carrier differences on the current spin polarization. The mobility and the spin-Rip time of carriers in organic and inorganic semiconductors are different. From the calculation, it is found that current spin polarization at a ferromagnetic/organic interface is higher than that at a ferromagnetic/inorganic interface because of different carriers in them. Effects of the conductivity matching, the spin dependent interfacial resistances, and the balk spin polarization of the ferromagnetic layer on the spin polarized injection are also discussed.

  20. New Organic Semiconductor Materials Applied in Organic Photovoltaic and Optical Devices

    Directory of Open Access Journals (Sweden)

    Andre F. S. Guedes

    2015-04-01

    Full Text Available The development of flexible organic photovoltaic solar cells, using an optically transparent substrate material and organic semiconductor materials, has been widely utilized by the electronic industry when producing new technological products. The flexible organic photovoltaic solar cells are the base Poly (3,4-ethylenedioxythiophene, PEDOT, Poly(3-hexyl thiophene, P3HT, Phenyl-C61-butyric acid methyl ester, PCBM and Polyaniline, PANI, were deposited in Indium Tin Oxide, ITO, and characterized by Electrical Measurements and Scanning Electron Microscopy (SEM. In addition, the thin film obtained by the deposition of PANI, prepared in perchloric acid solution, was identified through PANI-X1. The result obtained by electrical Measurements has demonstrated that the PET/ITO/PEDOT/P3HT:PCBM Blend/PANI-X1 layer presents the characteristic curve of standard solar cell after spin-coating and electrodeposition. The Thin film obtained by electrodeposition of PANI-X1 on P3HT/PCBM Blend was prepared in perchloric acid solution. These flexible organic photovoltaic solar cells presented power conversion efficiency of 12%. The inclusion of the PANI-X1 layer reduced the effects of degradation these organic photovoltaic panels induced for solar irradiation. In Scanning Electron Microscopy (SEM these studies reveal that the surface of PANI-X1 layers is strongly conditioned by the surface morphology of the dielectric.

  1. Semiconductor device PN junction fabrication using optical processing of amorphous semiconductor material

    Science.gov (United States)

    Sopori, Bhushan; Rangappan, Anikara

    2014-11-25

    Systems and methods for semiconductor device PN junction fabrication are provided. In one embodiment, a method for fabricating an electrical device having a P-N junction comprises: depositing a layer of amorphous semiconductor material onto a crystalline semiconductor base, wherein the crystalline semiconductor base comprises a crystalline phase of a same semiconductor as the amorphous layer; and growing the layer of amorphous semiconductor material into a layer of crystalline semiconductor material that is epitaxially matched to the lattice structure of the crystalline semiconductor base by applying an optical energy that penetrates at least the amorphous semiconductor material.

  2. Two-photon Photoemission of Organic Semiconductor Molecules on Ag(111)

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Aram [Univ. of California, Berkeley, CA (United States)

    2008-05-01

    Angle- and time-resolved two-photon photoemission (2PPE) was used to study systems of organic semiconductors on Ag(111). The 2PPE studies focused on electronic behavior specific to interfaces and ultrathin films. Electron time dynamics and band dispersions were characterized for ultrathin films of a prototypical n-type planar aromatic hydrocarbon, PTCDA, and representatives from a family of p-type oligothiophenes.In PTCDA, electronic behavior was correlated with film morphology and growth modes. Within a fewmonolayers of the interface, image potential states and a LUMO+1 state were detected. The degree to which the LUMO+1 state exhibited a band mass less than a free electron mass depended on the crystallinity of the layer. Similarly, image potential states were measured to have free electron-like effective masses on ordered surfaces, and the effective masses increased with disorder within the thin film. Electron lifetimes were correlated with film growth modes, such that the lifetimes of electrons excited into systems created by layer-by-layer, amorphous film growth increased by orders of magnitude by only a few monolayers from the surface. Conversely, the decay dynamics of electrons in Stranski-Krastanov systems were limited by interaction with the exposed wetting layer, which limited the barrier to decay back into the metal.Oligothiophenes including monothiophene, quaterthiophene, and sexithiophene were deposited on Ag(111), and their electronic energy levels and effective masses were studied as a function of oligothiophene length. The energy gap between HOMO and LUMO decreased with increasing chain length, but effective mass was found to depend on domains from high- or low-temperature growth conditions rather than chain length. In addition, the geometry of the molecule on the surface, e.g., tilted or planar, substantially affected the electronic structure.

  3. Progress Made in the Studies of Novel Materials for Organic Semiconductors

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Co-funded by NSFC, Ministry of Science & Technology of China (MOST) and the Chinese Academy of Sciences (CAS), researchers at the Key Laboratory of Organic Solids, ICCAS, made progress in designing and synthesis of n- and p-type organic semiconductors.

  4. N-doping of organic semiconductors by bis-metallosandwich compounds

    Science.gov (United States)

    Barlow, Stephen; Qi, Yabing; Kahn, Antoine; Marder, Seth; Kim, Sang Bok; Mohapatra, Swagat K.; Guo, Song

    2016-01-05

    The various inventions disclosed, described, and/or claimed herein relate to the field of methods for n-doping organic semiconductors with certain bis-metallosandwich compounds, the doped compositions produced, and the uses of the doped compositions in organic electronic devices. Metals can be manganese, rhenium, iron, ruthenium, osmium, rhodium, or iridium. Stable and efficient doping can be achieved.

  5. Smooth Growth of Organic Semiconductor Films on Graphene for High-Efficiency Electronics

    NARCIS (Netherlands)

    Hlawacek, G.; Khokhar, F.S.; van Gastel, Raoul; Poelsema, Bene; Teichert, Christian

    2011-01-01

    High-quality thin films of conjugated molecules with smooth interfaces are important to assist the advent of organic electronics. Here, we report on the layer-by-layer growth of the organic semiconductor molecule p-sexiphenyl (6P) on the transparent electrode material graphene. Low energy electron

  6. Prediction and theoretical characterization of p-type organic semiconductor crystals for field-effect transistor applications.

    Science.gov (United States)

    Atahan-Evrenk, Sule; Aspuru-Guzik, Alán

    2014-01-01

    The theoretical prediction and characterization of the solid-state structure of organic semiconductors has tremendous potential for the discovery of new high performance materials. To date, the theoretical analysis mostly relied on the availability of crystal structures obtained through X-ray diffraction. However, the theoretical prediction of the crystal structures of organic semiconductor molecules remains a challenge. This review highlights some of the recent advances in the determination of structure-property relationships of the known organic semiconductor single-crystals and summarizes a few available studies on the prediction of the crystal structures of p-type organic semiconductors for transistor applications.

  7. Thermal Gradient During Vacuum-Deposition Dramatically Enhances Charge Transport in Organic Semiconductors: Toward High-Performance N-Type Organic Field-Effect Transistors.

    Science.gov (United States)

    Kim, Joo-Hyun; Han, Singu; Jeong, Heejeong; Jang, Hayeong; Baek, Seolhee; Hu, Junbeom; Lee, Myungkyun; Choi, Byungwoo; Lee, Hwa Sung

    2017-03-09

    A thermal gradient distribution was applied to a substrate during the growth of a vacuum-deposited n-type organic semiconductor (OSC) film prepared from N,N'-bis(2-ethylhexyl)-1,7-dicyanoperylene-3,4:9,10-bis(dicarboxyimide) (PDI-CN2), and the electrical performances of the films deployed in organic field-effect transistors (OFETs) were characterized. The temperature gradient at the surface was controlled by tilting the substrate, which varied the temperature one-dimensionally between the heated bottom substrate and the cooled upper substrate. The vacuum-deposited OSC molecules diffused and rearranged on the surface according to the substrate temperature gradient, producing directional crystalline and grain structures in the PDI-CN2 film. The morphological and crystalline structures of the PDI-CN2 thin films grown under a vertical temperature gradient were dramatically enhanced, comparing with the structures obtained from either uniformly heated films or films prepared under a horizontally applied temperature gradient. The field effect mobilities of the PDI-CN2-FETs prepared using the vertically applied temperature gradient were as high as 0.59 cm(2) V(-1) s(-1), more than a factor of 2 higher than the mobility of 0.25 cm(2) V(-1) s(-1) submitted to conventional thermal annealing and the mobility of 0.29 cm(2) V(-1) s(-1) from the horizontally applied temperature gradient.

  8. Synthesis of Perylene Imide Diones as Platforms for the Development of Pyrazine Based Organic Semiconductors.

    Science.gov (United States)

    de Echegaray, Paula; Mancheño, María J; Arrechea-Marcos, Iratxe; Juárez, Rafael; López-Espejo, Guzmán; López Navarrete, J Teodomiro; Ramos, María Mar; Seoane, Carlos; Ortiz, Rocío Ponce; Segura, José L

    2016-11-18

    There is a great interest in peryleneimide (PI)-containing compounds given their unique combination of good electron accepting ability, high abosorption in the visible region, and outstanding chemical, thermal, and photochemical stabilities. Thus, herein we report the synthesis of perylene imide derivatives endowed with a 1,2-diketone functionality (PIDs) as efficient intermediates to easily access peryleneimide (PI)-containing organic semiconductors with enhanced absorption cross-section for the design of tunable semiconductor organic materials. Three processable organic molecular semiconductors containing thiophene and terthiophene moieties, PITa, PITb, and PITT, have been prepared from the novel PIDs. The tendency of these semiconductors for molecular aggregation have been investigated by NMR spectroscopy and supported by quantum chemical calculations. 2D NMR experiments and theoretical calculations point to an antiparallel π-stacking interaction as the most stable conformation in the aggregates. Investigation of the optical and electrochemical properties of the materials is also reported and analyzed in combination with DFT calculations. Although the derivatives presented here show modest electron mobilities of ∼10(-4) cm(2)V(-1)s(-1), these preliminary studies of their performance in organic field effect transistors (OFETs) indicate the potential of these new building blocks as n-type semiconductors.

  9. Universal arrhenius temperature activated charge transport in diodes from disordered organic semiconductors.

    Science.gov (United States)

    Craciun, N I; Wildeman, J; Blom, P W M

    2008-02-08

    Charge transport models developed for disordered organic semiconductors predict a non-Arrhenius temperature dependence ln(mu) proportional, variant1/T(2) for the mobility mu. We demonstrate that in space-charge limited diodes the hole mobility (micro(h)) of a large variety of organic semiconductors shows a universal Arrhenius temperature dependence micro(h)(T) = micro(0)exp(-Delta/kT) at low fields, due to the presence of extrinsic carriers from the Ohmic contact. The transport in a range of organic semiconductors, with a variation in room temperature mobility of more than 6 orders of magnitude, is characterized by a universal mobility micro(0) of 30-40 cm(2)/V s. As a result, we can predict the full temperature dependence of their charge transport properties with only the mobility at one temperature known.

  10. Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale

    KAUST Repository

    Rivnay, Jonathan

    2012-10-10

    A study was conducted to demonstrate quantitative determination of organic semiconductor microstructure from the molecular to device scale. The quantitative determination of organic semiconductor microstructure from the molecular to device scale was key to obtaining precise description of the molecular structure and microstructure of the materials of interest. This information combined with electrical characterization and modeling allowed for the establishment of general design rules to guide future rational design of materials and devices. Investigations revealed that a number and variety of defects were the largest contributors to the existence of disorder within a lattice, as organic semiconductor crystals were dominated by weak van der Waals bonding. Crystallite size, texture, and variations in structure due to spatial confinement and interfaces were also found to be relevant for transport of free charge carriers and bound excitonic species over distances that were important for device operation.

  11. Fabrication and performance of pressure-sensing device consisting of electret film and organic semiconductor

    Science.gov (United States)

    Kodzasa, Takehito; Nobeshima, Daiki; Kuribara, Kazunori; Uemura, Sei; Yoshida, Manabu

    2017-04-01

    We propose a new concept of a pressure-sensitive device that consists of an organic electret film and an organic semiconductor. This device exhibits high sensitivity and selectivity against various types of pressure. The sensing mechanism of this device originates from a modulation of the electric conductivity of the organic semiconductor film induced by the interaction between the semiconductor film and the charged electret film placed face to face. It is expected that a complicated sensor array will be fabricated by using a roll-to-roll manufacturing system, because this device can be prepared by an all-printing and simple lamination process without high-level positional adjustment for printing processes. This also shows that this device with a simple structure is suitable for application to a highly flexible device array sheet for an Internet of Things (IoT) or wearable sensing system.

  12. Low-voltage organic electronics based on a gate-tunable injection barrier in vertical graphene-organic semiconductor heterostructures.

    Science.gov (United States)

    Hlaing, Htay; Kim, Chang-Hyun; Carta, Fabio; Nam, Chang-Yong; Barton, Rob A; Petrone, Nicholas; Hone, James; Kymissis, Ioannis

    2015-01-14

    The vertical integration of graphene with inorganic semiconductors, oxide semiconductors, and newly emerging layered materials has recently been demonstrated as a promising route toward novel electronic and optoelectronic devices. Here, we report organic thin film transistors based on vertical heterojunctions of graphene and organic semiconductors. In these thin heterostructure devices, current modulation is accomplished by tuning of the injection barriers at the semiconductor/graphene interface with the application of a gate voltage. N-channel devices fabricated with a thin layer of C60 show a room temperature on/off ratio >10(4) and current density of up to 44 mAcm(-2). Because of the ultrashort channel intrinsic to the vertical structure, the device is fully operational at a driving voltage of 200 mV. A complementary p-channel device is also investigated, and a logic inverter based on two complementary transistors is demonstrated. The vertical integration of graphene with organic semiconductors via simple, scalable, and low-temperature fabrication processes opens up new opportunities to realize flexible, transparent organic electronic, and optoelectronic devices.

  13. Late stage crystallization and healing during spin-coating enhance carrier transport in small-molecule organic semiconductors

    KAUST Repository

    Chou, Kang Wei

    2014-01-01

    Spin-coating is currently the most widely used solution processing method in organic electronics. Here, we report, for the first time, a direct investigation of the formation process of the small-molecule organic semiconductor (OSC) 6,13-bis(triisopropylsilylethynyl) (TIPS)-pentacene during spin-coating in the context of an organic thin film transistor (OTFT) application. The solution thinning and thin film formation were monitored in situ by optical reflectometry and grazing incidence wide angle X-ray scattering, respectively, both of which were performed during spin-coating. We find that OSC thin film formation is akin to a quenching process, marked by a deposition rate of ∼100 nm s-1, nearly three orders of magnitude faster than drop-casting. This is then followed by a more gradual crystallization and healing step which depends upon the spinning speed. We associate this to further crystallization and healing of defects by residency of the residual solvent trapped inside the kinetically trapped film. The residency time of the trapped solvent is extended to several seconds by slowing the rotational speed of the substrate and is credited with improving the carrier mobility by nearly two orders of magnitude. Based on this insight, we deliberately slow down the solvent evaporation further and increase the carrier mobility by an additional order of magnitude. These results demonstrate how spin-coating conditions can be used as a handle over the crystallinity of organic semiconductors otherwise quenched during initial formation only to recrystallize and heal during extended interaction with the trapped solvent. This journal is © the Partner Organisations 2014.

  14. Preparative semiconductor photoredox catalysis: An emerging theme in organic synthesis

    Directory of Open Access Journals (Sweden)

    David W. Manley

    2015-09-01

    Full Text Available Heterogeneous semiconductor photoredox catalysis (SCPC, particularly with TiO2, is evolving to provide radically new synthetic applications. In this review we describe how photoactivated SCPCs can either (i interact with a precursor that donates an electron to the semiconductor thus generating a radical cation; or (ii interact with an acceptor precursor that picks up an electron with production of a radical anion. The radical cations of appropriate donors convert to neutral radicals usually by loss of a proton. The most efficient donors for synthetic purposes contain adjacent functional groups such that the neutral radicals are resonance stabilized. Thus, ET from allylic alkenes and enol ethers generated allyl type radicals that reacted with 1,2-diazine or imine co-reactants to yield functionalized hydrazones or benzylanilines. SCPC with tertiary amines enabled electron-deficient alkenes to be alkylated and furoquinolinones to be accessed. Primary amines on their own led to self-reactions involving C–N coupling and, with terminal diamines, cyclic amines were produced. Carboxylic acids were particularly fruitful affording C-centered radicals that alkylated alkenes and took part in tandem addition cyclizations producing chromenopyrroles; decarboxylative homo-dimerizations were also observed. Acceptors initially yielding radical anions included nitroaromatics and aromatic iodides. The latter led to hydrodehalogenations and cyclizations with suitable precursors. Reductive SCPC also enabled electron-deficient alkenes and aromatic aldehydes to be hydrogenated without the need for hydrogen gas.

  15. Preparative semiconductor photoredox catalysis: An emerging theme in organic synthesis.

    Science.gov (United States)

    Manley, David W; Walton, John C

    2015-01-01

    Heterogeneous semiconductor photoredox catalysis (SCPC), particularly with TiO2, is evolving to provide radically new synthetic applications. In this review we describe how photoactivated SCPCs can either (i) interact with a precursor that donates an electron to the semiconductor thus generating a radical cation; or (ii) interact with an acceptor precursor that picks up an electron with production of a radical anion. The radical cations of appropriate donors convert to neutral radicals usually by loss of a proton. The most efficient donors for synthetic purposes contain adjacent functional groups such that the neutral radicals are resonance stabilized. Thus, ET from allylic alkenes and enol ethers generated allyl type radicals that reacted with 1,2-diazine or imine co-reactants to yield functionalized hydrazones or benzylanilines. SCPC with tertiary amines enabled electron-deficient alkenes to be alkylated and furoquinolinones to be accessed. Primary amines on their own led to self-reactions involving C-N coupling and, with terminal diamines, cyclic amines were produced. Carboxylic acids were particularly fruitful affording C-centered radicals that alkylated alkenes and took part in tandem addition cyclizations producing chromenopyrroles; decarboxylative homo-dimerizations were also observed. Acceptors initially yielding radical anions included nitroaromatics and aromatic iodides. The latter led to hydrodehalogenations and cyclizations with suitable precursors. Reductive SCPC also enabled electron-deficient alkenes and aromatic aldehydes to be hydrogenated without the need for hydrogen gas.

  16. Liquid-crystalline rigid-core semiconductor oligothiophenes: influence of molecular structure on phase behaviour and thin-film properties.

    Science.gov (United States)

    Melucci, Manuela; Favaretto, Laura; Bettini, Christian; Gazzano, Massimo; Camaioni, Nadia; Maccagnani, Piera; Ostoja, Paolo; Monari, Magda; Barbarella, Giovanna

    2007-01-01

    The design, synthesis and properties of liquid-crystalline semiconducting oligothiophenes containing dithienothiophene (DTT), benzothiadiazole (BTZ) and carbazole (CBZ) rigid cores are described. The effect of molecular structure (shape, size and substitution) on their thermal behaviour and electrical properties has been investigated. Polarised optical microscopy (POM) and differential scanning calorimetry (DSC) analyses have revealed highly ordered smectic mesophases for most of the newly synthesised compounds. X-ray diffraction (XRD) studies performed at various temperatures have shown that the smectic order is retained in the crystalline state upon cooling across the transition temperature, affording cast films with a more favourable morphology for FET applications.

  17. Molecular Electrical Doping of Organic Semiconductors: Fundamental Mechanisms and Emerging Dopant Design Rules.

    Science.gov (United States)

    Salzmann, Ingo; Heimel, Georg; Oehzelt, Martin; Winkler, Stefanie; Koch, Norbert

    2016-03-15

    Today's information society depends on our ability to controllably dope inorganic semiconductors, such as silicon, thereby tuning their electrical properties to application-specific demands. For optoelectronic devices, organic semiconductors, that is, conjugated polymers and molecules, have emerged as superior alternative owing to the ease of tuning their optical gap through chemical variability and their potential for low-cost, large-area processing on flexible substrates. There, the potential of molecular electrical doping for improving the performance of, for example, organic light-emitting devices or organic solar cells has only recently been established. The doping efficiency, however, remains conspicuously low, highlighting the fact that the underlying mechanisms of molecular doping in organic semiconductors are only little understood compared with their inorganic counterparts. Here, we review the broad range of phenomena observed upon molecularly doping organic semiconductors and identify two distinctly different scenarios: the pairwise formation of both organic semiconductor and dopant ions on one hand and the emergence of ground state charge transfer complexes between organic semiconductor and dopant through supramolecular hybridization of their respective frontier molecular orbitals on the other hand. Evidence for the occurrence of these two scenarios is subsequently discussed on the basis of the characteristic and strikingly different signatures of the individual species involved in the respective doping processes in a variety of spectroscopic techniques. The critical importance of a statistical view of doping, rather than a bimolecular picture, is then highlighted by employing numerical simulations, which reveal one of the main differences between inorganic and organic semiconductors to be their respective density of electronic states and the doping induced changes thereof. Engineering the density of states of doped organic semiconductors, the Fermi

  18. New concept to break the intrinsic properties of organic semiconductors for optical sensing applications

    Science.gov (United States)

    Choy, Wallace C. H.

    2015-09-01

    As the intrinsic electrostatic limit, space charge limit (SCL) for photocurrent is a universal phenomenon which is fundamental important for organic semiconductors. We will demonstrate SCL breaking by a new plasmonic-electrical concept. As a proof-ofconcept, organic solar cells (OSCs) comprising metallic planar and grating electrodes are studied. Interestingly, although strong plasmonic resonances induce abnormally dense photocarriers around a grating anode, the grating incorporated inverted OSC is exempt from space charge accumulation (limit) and degradation of electrical properties. The plasmonic-electrical concept will open up a new way to manipulate both optical and electrical properties of semiconductor devices simultaneously.

  19. A review of carrier thermoelectric-transport theory in organic semiconductors.

    Science.gov (United States)

    Lu, Nianduan; Li, Ling; Liu, Ming

    2016-07-20

    Carrier thermoelectric-transport theory has recently become of growing interest and numerous thermoelectric-transport models have been proposed for organic semiconductors, due to pressing current issues involving energy production and the environment. The purpose of this review is to provide a theoretical description of the thermoelectric Seebeck effect in organic semiconductors. Special attention is devoted to the carrier concentration, temperature, polaron effect and dipole effect dependence of the Seebeck effect and its relationship to hopping transport theory. Furthermore, various theoretical methods are used to discuss carrier thermoelectric transport. Finally, an outlook of the remaining challenges ahead for future theoretical research is provided.

  20. Crystalline organization of a methanofullerene as used for plastic solar-cell applications

    Energy Technology Data Exchange (ETDEWEB)

    Yang, X.; Michels, M.A.J. [Group Polymer Physics, Eindhoven University of Technology, PO Box 513, NL-5600 MB Eindhoven (Netherlands); Dutch Polymer Institute, PO Box 902, NL-5600 AX Eindhoven (Netherlands); Duren, J.K.J. van; Janssen, R.A.J. [Molecular Materials and Nanosystems, Eindhoven University of Technology, PO Box 513, NL-5600 MB Eindhoven (Netherlands); Rispens, M.T.; Hummelen, J.C. [Molecular Electronics, University of Groningen, Nijenborgh 4, NL-9747 AG Groningen (Netherlands); Loos, J. [Laboratories of Polymer Technology and, Solid State Chemistry and Materials, Eindhoven University of Technology, PO Box 513, NL-5600 MB Eindhoven (Netherlands)

    2004-05-17

    Crystalline organization of a methanofullerene, [6,6]-phenyl C{sub 61} butyric acid methyl ester (PCBM), as achieved in various thin-film deposition techniques, is reported. Mechanically stable, and thus self-supporting, thin films obtained via fast solvent evaporation techniques are found to be composed of densely and homogeneously distributed PCBM nanocrystals with various crystallographic orientations. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  1. Self-organized liquid-crystalline nanostructured membranes for water treatment: selective permeation of ions.

    Science.gov (United States)

    Henmi, Masahiro; Nakatsuji, Koji; Ichikawa, Takahiro; Tomioka, Hiroki; Sakamoto, Takeshi; Yoshio, Masafumi; Kato, Takashi

    2012-05-02

    A membrane with ordered 3D ionic nanochannels constructed by in situ photopolymerization of a thermotropic liquid-crystalline monomer shows high filtration performance and ion selectivity. The nanostructured membrane exhibits water-treatment performance superior to that of an amorphous membrane prepared from the isotropic melt of the monomer. Self-organized nanostructured membranes have great potential for supplying high-quality water. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Charge-transfer mobility and electrical conductivity of PANI as conjugated organic semiconductors

    Science.gov (United States)

    Zhang, Yahong; Duan, Yuping; Song, Lulu; Zheng, Daoyuan; Zhang, Mingxing; Zhao, Guangjiu

    2017-09-01

    The intramolecular charge transfer properties of a phenyl-end-capped aniline tetramer (ANIH) and a chloro-substituted derivative (ANICl) as organic semiconductors were theoretically studied through the first-principles calculation based on the Marcus-Hush theory. The reorganization energies, intermolecular electronic couplings, angular resolution anisotropic mobilities, and density of states of the two crystals were evaluated. The calculated results demonstrate that both ANIH and ANICl crystals show the higher electron transfer mobilities than the hole-transfer mobilities, which means that the two crystals should prefer to function as n-type organic semiconductors. Furthermore, the angle dependence mobilities of the two crystals show remarkable anisotropic character. The maximum mobility μmax of ANIH and ANICl crystals is 1.3893 and 0.0272 cm2 V-1 s-1, which appear at the orientation angles near 176°/356° and 119°/299° of a conducting channel on the a-b reference plane. It is synthetically evaluated that the ANIH crystal possesses relatively lower reorganization energy, higher electronic coupling, and electron transfer mobility, which means that the ANIH crystal may be the more ideal candidate as a high performance n-type organic semiconductor material. The systematic theoretical studies on organic crystals should be conducive to evaluating the charge-transport properties and designing higher performance organic semiconductor materials.

  3. Efficient light emission from inorganic and organic semiconductor hybrid structures by energy-level tuning.

    Science.gov (United States)

    Schlesinger, R; Bianchi, F; Blumstengel, S; Christodoulou, C; Ovsyannikov, R; Kobin, B; Moudgil, K; Barlow, S; Hecht, S; Marder, S R; Henneberger, F; Koch, N

    2015-04-15

    The fundamental limits of inorganic semiconductors for light emitting applications, such as holographic displays, biomedical imaging and ultrafast data processing and communication, might be overcome by hybridization with their organic counterparts, which feature enhanced frequency response and colour range. Innovative hybrid inorganic/organic structures exploit efficient electrical injection and high excitation density of inorganic semiconductors and subsequent energy transfer to the organic semiconductor, provided that the radiative emission yield is high. An inherent obstacle to that end is the unfavourable energy level offset at hybrid inorganic/organic structures, which rather facilitates charge transfer that quenches light emission. Here, we introduce a technologically relevant method to optimize the hybrid structure's energy levels, here comprising ZnO and a tailored ladder-type oligophenylene. The ZnO work function is substantially lowered with an organometallic donor monolayer, aligning the frontier levels of the inorganic and organic semiconductors. This increases the hybrid structure's radiative emission yield sevenfold, validating the relevance of our approach.

  4. Bulk charge carrier transport in push-pull type organic semiconductor.

    Science.gov (United States)

    Karak, Supravat; Liu, Feng; Russell, Thomas P; Duzhko, Volodimyr V

    2014-12-10

    Operation of organic electronic and optoelectronic devices relies on charge transport properties of active layer materials. The magnitude of charge carrier mobility, a key efficiency metrics of charge transport properties, is determined by the chemical structure of molecular units and their crystallographic packing motifs, as well as strongly depends on the film fabrication approaches that produce films with different degrees of anisotropy and structural order. Probed by the time-of-flight and grazing incidence X-ray diffraction techniques, bulk charge carrier transport, molecular packing, and film morphology in different structural phases of push-pull type organic semiconductor, 7,7'-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophen]-5yl)benzo[c][1,2,5] thiadiazole), one of the most efficient small-molecule photovoltaic materials to-date, are described herein. In the isotropic phase, the material is ambipolar with high mobilities for a fluid state. The electron and hole mobilities at the phase onset at 210.78 °C are 1.0 × 10(-3) cm(2)/(V s) and 6.5 × 10(-4) cm(2)/(V s), respectively. Analysis of the temperature and electric field dependences of the mobilities in the framework of Gaussian disorder formalism suggests larger energetic and positional disorder for electron transport sites. Below 210 °C, crystallization into a polycrystalline film with a triclinic unit cell symmetry and high degree of anisotropy leads to a 10-fold increase of hole mobility. The mobility is limited by the charge transfer along the direction of branched alkyl side chains. Below 90 °C, faster cooling rates produce even higher hole mobilities up to 2 × 10(-2) cm(2)/(V s) at 25 °C because of the more isotropic orientations of crystalline domains. These properties facilitate in understanding efficient material performance in photovoltaic devices and will guide further development of materials and devices.

  5. Interface Design Principles for High-Performance Organic Semiconductor Devices.

    Science.gov (United States)

    Nie, Wanyi; Gupta, Gautam; Crone, Brian K; Liu, Feilong; Smith, Darryl L; Ruden, P Paul; Kuo, Cheng-Yu; Tsai, Hsinhan; Wang, Hsing-Lin; Li, Hao; Tretiak, Sergei; Mohite, Aditya D

    2015-06-01

    Precise manipulation of organic donor-acceptor interfaces using spacer layers is demonstrated to suppress interface recombination in an organic photo-voltaic device. These strategies lead to a dramatic improvement in a model bilayer system and bulk-heterojunction system. These interface strategies are applicable to a wide variety of donor-acceptor systems, making them both fundamentally interesting and technologically relevant for achieving high efficiency organic electronic devices.

  6. Retention Time and Depolarization in Organic Nonvolatile Memories Based on Ferroelectric Semiconductor Phase-Separated Blends

    NARCIS (Netherlands)

    Asadi, Kamal; Wildeman, Jurjen; Blom, Paul W. M.; de Leeuw, Dago M.

    2010-01-01

    Resistive switches have been fabricated using a phase-separated blend film of ferroelectric random copolymer poly(vinylidene fluoride-co-trifluoroethylene) with the organic semiconductor regio-irregular poly(3-hexylthiophene) (rir-P3HT). Spin-coated blend films have been contacted with symmetrical A

  7. Retention time and depolarization in organic nonvolatile memories based on ferroelectric semiconductor phase-separated blends

    NARCIS (Netherlands)

    Asadi, K.; Wildeman, J.; Blom, P.W.M.; Leeuw, D.M. de

    2010-01-01

    Resistive switches have been fabricated using a phase-separated blend film of ferroelectric random copolymer poly(vinylidene fluoride-co-trifluoroethylene) with the organic semiconductor regio-irregular poly(3-hexylthiophene) (rir-P3HT). Spin-coated blend films have been contacted with symmetrical A

  8. Bias-induced photoluminescence quenching of single colloidal quantum dots embedded in organic semiconductors.

    Science.gov (United States)

    Huang, Hao; Dorn, August; Nair, Gautham P; Bulović, Vladimir; Bawendi, Moungi G

    2007-12-01

    We demonstrate reversible quenching of the photoluminescence from single CdSe/ZnS colloidal quantum dots embedded in thin films of the molecular organic semiconductor N,N'-diphenyl-N,N'-bis(3-methylphenyl)-(1,1'-biphenyl)-4,4'-diamine (TPD) in a layered device structure. Our analysis, based on current and charge carrier density, points toward field ionization as the dominant photoluminescence quenching mechanism. Blinking traces from individual quantum dots reveal that the photoluminescence amplitude decreases continuously as a function of increasing forward bias even at the single quantum dot level. In addition, we show that quantum dot photoluminescence is quenched by aluminum tris(8-hydroxyquinoline) (Alq3) in chloroform solutions as well as in thin solid films of Alq3 whereas TPD has little effect. This highlights the importance of chemical compatibility between semiconductor nanocrystals and surrounding organic semiconductors. Our study helps elucidate elementary interactions between quantum dots and organic semiconductors, knowledge needed for designing efficient quantum dot organic optoelectronic devices.

  9. Direct Measurement of the Triplet Exciton Diffusion Length in Organic Semiconductors

    NARCIS (Netherlands)

    Mikhnenko, Oleksandr V.; Ruiter, Roald; Blom, Paul W. M.; Loi, Maria Antonietta

    2012-01-01

    We present a new method to measure the triplet exciton diffusion length in organic semiconductors. N,N'-di-[(1-naphthyl)-N,N'-diphenyl]-1,1'-biphenyl-4,4'-diamine (NPD) has been used as a model system. Triplet excitons are injected into a thin film of NPD by a phosphorescent thin film, which is opti

  10. Charge transport calculations of organic semiconductors by the time-dependent wave-packet diffusion method

    Science.gov (United States)

    Ishii, Hiroyuki; Kobayashi, Nobuhiko; Hirose, Kenji

    2012-02-01

    Organic materials form crystals by relatively weak Van der Waals attraction between molecules, and thus differ fundamentally from covalently bonded semiconductors. Carriers in the organic semiconductors induce the drastic lattice deformation, which is called as polaron state. The polaron effect on the transport is a serious problem. Exactly what conduction mechanism applies to organic semiconductors has not been established. Therefore, we have investigated the transport properties using the Time-Dependent Wave-Packet Diffusion (TD-WPD) method [1]. To consider the polaron effect on the transport, in the methodology, we combine the wave-packet dynamics based on the quantum mechanics theory with the molecular dynamics. As the results, we can describe the electron motion modified by (electron-phonon mediated) time-dependent structural change. We investigate the transport property from an atomistic viewpoint and evaluate the mobility of organic semiconductors. We clarify the temperature dependence of mobility from the thermal activated behavior to the power law behavior. I will talk about these results in my presentation. [1] H. Ishii, N. Kobayashi, K. Hirose, Phys. Rev. B, 82 085435 (2010).

  11. Polyfluorenes as organic semiconductors for polymeric field effect transistors

    Science.gov (United States)

    Brennan, David J.; Townsend, Paul H., III; Welsh, Dean M.; Dibbs, Mitchell G.; Shaw, Jeff M.; Miklovich, Jessica L.; Boeke, Robyn B.; Arias, Ana Claudia; Creswell, Lisa; MacKenzie, J. D.; Ramsdale, Catherine; Menon, Anoop; Sirringhaus, Henning

    2003-11-01

    Well-characterized F8T2 polyfluorene (Dow Chemical) has been prepared with weight average molecular weights (Mw) ranging from about 20,000 to 120,000. This semiconducting polymer has been used by Plastic Logic to fabricate arrays of 4,800 thin film transistors (TFTs) with 50 dpi, to be used as backplanes for active matrix displays. In this paper, the effects that molecular weight and thermal treatment have on the electrical characteristics of F8T2-based TFTs are reported. First, transistor performance improves with increasing molecular weight, with maximum values of TFT mobility approaching 1x 10-2 cm2 /V-s. Consistently higher mobilities are obtained when the F8T2 semiconductor makes contact with PEDOT/PSS versus gold electrodes. Alignment of F8T2 on a rubbed polyimide substrate is maintained after quenching, as determined by measurement of the dichroic ratios. Early-stage results on the development of inks based on F8T2 polyfluorene are also reported.

  12. Chemistry and electronic properties of ferromagnetic metal-organic semiconductor interfaces: Fe on CuPc

    Energy Technology Data Exchange (ETDEWEB)

    Aristov, V.Yu. [IFW Dresden, 01069 Dresden (Germany); Institute of Solid State Physics, Russian Academy of Sciences, Chernogolovka, Moscow distr., 142432 (Russian Federation); Molodtsova, O.V.; Knupfer, M. [IFW Dresden, 01069 Dresden (Germany); Ossipyan, Yu.A. [Institute of Solid State Physics, Russian Academy of Sciences, Chernogolovka, Moscow distr., 142432 (Russian Federation); Doyle, B.P. [TASC-INFM Laboratory, Area Science Park - Basovizza, 34012 Trieste (Italy); Department of Physics, University of Johannesburg, PO Box 524, Auckland Park, 2006 (South Africa); Nannarone, S. [TASC-INFM Laboratory, Area Science Park - Basovizza, 34012 Trieste (Italy); Dipartimento di Ingegneria dei Materiali ed Amb., Universita di Modena e Reggio Emilia (Italy)

    2009-12-15

    The chemistry and electronic properties of the interfaces formed between the ferromagnetic metal (Fe) and the model organic semiconductor copper phthalocyanine are investigated in ultra-high vacuum conditions for the case of metal deposition onto the organic molecular thin film. The studies were performed by means of core-level and valence-band high-resolution photoemission electron spectroscopy (PES) as well as near-edge X-ray absorption fine structure using synchrotron radiation. Metal overlayer formation on the top of the organic semiconductor was observed without substantial penetration of deposited metal species into the organic film. At the thin interface layer the ferromagnetic metal shows strong chemical interaction with the nitrogen and carbon of the organic films. Moreover, our results infer that, as a consequence of Fe deposition onto CuPc, central copper atoms of the organic molecules at the interface are reduced from Cu(II) to Cu(I), while Fe atoms are oxidized and/or the ferromagnetic metal replaces this central Cu atom. Further optimization of such an interface is thus required to allow and/or facilitate the injection of spin-polarized carriers into organic semiconductors. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  13. Trap healing and ultralow-noise Hall effect at the surface of organic semiconductors.

    Science.gov (United States)

    Lee, B; Chen, Y; Fu, D; Yi, H T; Czelen, K; Najafov, H; Podzorov, V

    2013-12-01

    Fundamental studies of intrinsic charge transport properties of organic semiconductors are often hindered by charge traps associated with static disorder present even in optimized single-crystal devices. Here, we report a method of surface functionalization using an inert non-conjugated polymer, perfluoropolyether (PFPE), deposited at the surface of organic molecular crystals, which results in accumulation of mobile holes and a 'trap healing' effect at the crystal/PFPE interface. As a consequence, a remarkable ultralow-noise, trp-free conduction regime characterized by intrinsic mobility and transport anisotropy emerges in organic single crystals, and Hall effect measurements with an unprecedented signal-to-noise ratio are demonstrated. This general method to convert trap-dominated organic semiconductors to intrinsic systems may enable the determination of intrinsic transport parameters with high accuracy and make Hall effect measurements in molecular crystals ubiquitous.

  14. Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals.

    Science.gov (United States)

    Niazi, Muhammad R; Li, Ruipeng; Qiang Li, Er; Kirmani, Ahmad R; Abdelsamie, Maged; Wang, Qingxiao; Pan, Wenyang; Payne, Marcia M; Anthony, John E; Smilgies, Detlef-M; Thoroddsen, Sigurdur T; Giannelis, Emmanuel P; Amassian, Aram

    2015-11-23

    Solution-printed organic semiconductors have emerged in recent years as promising contenders for roll-to-roll manufacturing of electronic and optoelectronic circuits. The stringent performance requirements for organic thin-film transistors (OTFTs) in terms of carrier mobility, switching speed, turn-on voltage and uniformity over large areas require performance currently achieved by organic single-crystal devices, but these suffer from scale-up challenges. Here we present a new method based on blade coating of a blend of conjugated small molecules and amorphous insulating polymers to produce OTFTs with consistently excellent performance characteristics (carrier mobility as high as 6.7 cm(2) V(-1) s(-1), low threshold voltages ofcrystallization can yield solution-printed polycrystalline organic semiconductor films with transport properties and other figures of merit on par with their single-crystal counterparts.

  15. Optically Detected Magnetic Resonance and Thermal Activation Spectroscopy Study of Organic Semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Chang-Hwan Kim

    2003-12-12

    Organic electronic materials are a new class of emerging materials. Organic light emitting devices (OLEDs) are the most promising candidates for future flat panel display technologies. The photophysical characterization is the basic research step one must follow to understand this new class of materials and devices. The light emission properties are closely related to the transport properties of these materials. The objective of this dissertation is to probe the relation between transport and photophysical properties of organic semiconductors. The transport characteristics were evaluated by using thermally stimulated current and thermally stimulated luminescence techniques. The photoluminescence detected magnetic resonance and photoluminescence quantum yield studies provide valuable photophysical information on this class of materials. OLEDs are already in the market. However, detailed studies on the degradation mechanisms are still lacking. Since both optically detected magnetic resonance and thermal activation spectroscopy probe long-lived defect-related states in organic semiconductors, the combined study generates new insight on the OLED operation and degradation mechanisms.

  16. Direct top-down fabrication of nanoscale electrodes for organic semiconductors using fluoropolymer resists

    OpenAIRE

    PARK, J.; Ho, J; Yun, H; Park, M.; Lee, J. H.; Seo, M.; Campbell, Eleanor E. B.; Lee, C; Pyo, S.; Lee, Sangwook

    2013-01-01

    We report the use of a fluoropolymer resist for the damage-free e-beam lithographic patterning of organic semiconductors. The same material is also shown to be suitable as an orthogonal electron beam resist for the patterning of top-contact electrodes on organic thin films. We demonstrate this by characterizing pentacene field effect transistors with feature sizes as small as 100 nm and compare the performance of bottom- and top-contacted devices.

  17. Spin Coulomb Dragging Inhibition of Spin-Polarized Electric Current Injecting into Organic Semiconductors

    Institute of Scientific and Technical Information of China (English)

    ZHAO Jun-Qing; QIAO Shi-Zhu; JIA Zhen-Feng; ZHANG Ning-Yu; JI Yan-Ju; PANG Yan-Tao; CHEN Ying; FU Gang

    2008-01-01

    @@ We introduce a one-dimensional spin injection structure comprising a ferromagnetic metal and a nondegenerate organic semiconductor to model electric current polarizations.With this model we analyse spin Coulomb dragging (SCD) effects on the polarization under various electric fields, interface and conductivity conditions.The results show that the SCD inhibits the current polarization.Thus the SCD inhibition should be well considered for accurate evaluation of current polarization in the design of organic spin devices.

  18. Nanoimprinted organic semiconductor laser pumped by a light-emitting diode.

    Science.gov (United States)

    Tsiminis, Georgios; Wang, Yue; Kanibolotsky, Alexander L; Inigo, Anto R; Skabara, Peter J; Samuel, Ifor D W; Turnbull, Graham A

    2013-05-28

    An organic semiconductor laser, simply fabricated by UV-nanoimprint lithography (UV-NIL), that is pumped with a pulsed InGaN LED is demonstrated. Molecular weight optimization of the polymer gain medium on a nanoimprinted polymer distributed feedback resonator enables the lowest reported UV-NIL laser threshold density of 770 W cm(-2) , establishing the potential for scalable organic laser fabrication compatible with mass-produced LEDs.

  19. Meso-epitaxial solution-growth of self-organizing discotic liquid-crystalline semiconductors

    DEFF Research Database (Denmark)

    Craats, A.M. van de; Stutzmann, N.; Bunk, Oliver

    2003-01-01

    Substituted hexabenzocoronenes (HBCs) form films with supramolecularly ordered columnar stacks that are uniaxially oriented onto poly(tetrafluoroethylene) alignment layers (see Figure). In field-effect transistor (FET) tests, mobilities of up to 10–3 cm2V–1s–1 and high on–off ratios of more than...

  20. Investigation of Heterojunctions and Multiple Quantum Well Structures Using Crystalline Organic Semiconductors

    Science.gov (United States)

    1993-10-12

    R. Kearns, J. Chem. Phys., 45, 3966 (1966). 26. H. M. Gibbs, S. L. McCall, T. N. C. Venkatesan, A. C. Gossard, A. P. Passner, and W. Wiegman , Appl...Venkatesan. A. C. Gossard. A. P. gthe measured carrier lifetime to theoret- Passner. and W. Wiegman , Appl. Phys. Lett. 35, 451 (1979). By comparing te

  1. Metal-organic semiconductor interfacial barrier height determination from internal photoemission signal in spectral response measurements

    Science.gov (United States)

    Kumar, Sandeep; Iyer, S. Sundar Kumar

    2017-04-01

    Accurate and convenient evaluation methods of the interfacial barrier ϕb for charge carriers in metal semiconductor (MS) junctions are important for designing and building better opto-electronic devices. This becomes more critical for organic semiconductor devices where a plethora of molecules are in use and standardised models applicable to myriads of material combinations for the different devices may have limited applicability. In this paper, internal photoemission (IPE) from spectral response (SR) in the ultra-violet to near infra-red range of different MS junctions of metal-organic semiconductor-metal (MSM) test structures is used to determine more realistic MS ϕb values. The representative organic semiconductor considered is [6, 6]-phenyl C61 butyric acid methyl ester, and the metals considered are Al and Au. The IPE signals in the SR measurement of the MSM device are identified and separated before it is analysed to estimate ϕb for the MS junction. The analysis of IPE signals under different bias conditions allows the evaluation of ϕb for both the front and back junctions, as well as for symmetric MSM devices.

  2. Organic Thin-Film Transistors with Phase Separation of Polymer-Blend Small-Molecule Semiconductors: Dependence on Molecular Weight and Types of Polymer

    Science.gov (United States)

    Ohe, Takahiro; Kuribayashi, Miki; Tsuboi, Ami; Satori, Kotaro; Itabashi, Masao; Nomoto, Kazumasa

    2009-12-01

    We have investigated effect of polymer on solution-processed organic thin-film transistors (TFTs) with polymer-blend semiconductors. Organic TFTs made from a solution of 6,13-bis(triisopropylsilylethynyl)-pentacene with a poly(α-methylstyrene) (PaMS) molecular weight of 20 k or above, exhibited mobility around 0.1 cm2/(V.s). On the other hand, the organic TFTs with a PaMS molecular weight of 2 k or with a poly(isobutyl methacrylate), exhibited much lower mobility. This can be explained in terms of the structure and crystallinity of the films. The results of film structure can be explained by applying the Flory-Huggins theory.

  3. Effects of Exposure to Semiconductor Nanoparticles on Aquatic Organisms

    Directory of Open Access Journals (Sweden)

    Kenton Leigh

    2012-01-01

    Full Text Available Because of their unique physical, optical, and mechanical properties, nanomaterials hold great promise in improving on a wide variety of current technologies. Consequently, their use in research and consumer products is increasing rapidly, and contamination of the environment with various nanomaterials seems inevitable. Because surface waters receive pollutants and contaminants from many sources including nanoparticles and act as reservoirs and conduits for many environmental contaminants, understanding the potential impacts of nanoparticles on the organisms within these environments is critical to evaluating their potential toxicity. While there is much to be learned about interactions between nanomaterials and aquatic systems, there have been a number of recent reports of interactions of quantum dots (QDs with aquatic environments and aquatic organisms. This review is focused on providing a summary of recent work investigating the impacts of quantum dots on aquatic organisms.

  4. A quasimechanism of melt acceleration in the thermal decomposition of crystalline organic solids

    Energy Technology Data Exchange (ETDEWEB)

    Henson, Bryan F [Los Alamos National Laboratory

    2009-01-01

    It has been know for half a century that many crystalline organic solids undergo an acceleration in the rate of thermal decomposition as the melting temperature is approached. This acceleration terminates at the melting point, exhibiting an Arrhenius-like temperature dependence in the faster decomposition rate from the liquid phase. This observation has been modeled previously using various premelting behaviors based on e.g. freezing point depression induced by decomposition products or solvent impurities. These models do not, however, indicate a mechanism for liquid formation and acceleration which is an inherent function of the bulk thermodynamics of the molecule. Here we show that such an inherent thermodynamic mechanism for liquid formation exists in the form of the so-called quasi-liquid layer at the solid surface. We explore a kinetic mechanism which describes the acceleration of rate and is a function of the free energies of sublimation and vaporization. We construct a differential rate law from these thermodynamic free energies and a normalized progress variable. We further construct a reduced variable formulation of the model which is a simple function of the metastable liquid activity below the melting point, and show that it is applicable to the observed melt acceleration in several common organic crystalline solids. A component of the differential rate law, zero order in the progress variable, is shown to be proportional to the thickness of the quasiliquid layer predicted by a recent thermodynamic theory for this phenomenon. This work therefore serves not only to provide new insight into thermal decomposition in a broad class or organic crystalline solids, but also further validates the underlying thermodynamic nature of the phenomenon of liquid formation on the molecular surface at temperatures below the melting point.

  5. Optimized synthesis and crystalline stability of γ-cyclodextrin metal-organic frameworks for drug adsorption.

    Science.gov (United States)

    Liu, Botao; Li, Haiyan; Xu, Xiaonan; Li, Xue; Lv, Nana; Singh, Vikramjeet; Stoddart, J Fraser; York, Peter; Xu, Xu; Gref, Ruxandra; Zhang, Jiwen

    2016-11-30

    The biocompatible and renewable cyclodextrin metal-organic frameworks (CD-MOFs) have addressed a range of opportunities in molecular storage and separation sciences. The reported protocols for their synthesis, however, were carried out at room temperature over long time periods of time (24h), producing crystals of relatively poor uniformity. In this investigation, micron sized γ-CD-MOFs were synthesized by an optimized vapor diffusion method at elevated temperature (50°C) within 6h, after which the size control, crystalline stability and drug adsorption behavior were investigated in detail. In this manner, uniform cubic γ-CD-MOF crystals were obtained when the reaction temperature was raised to 50°C with pre-addition of the reaction solvent. The size of γ-CD-MOFs was adjusted efficiently by changing the reactant concentrations, temperatures, time, γ-CD ratios to KOH and surfactant concentrations, without influencing the porosity and crystallinity of the material markedly. Varing degrees of reduction in crystallinity and change in morphology were observed when the γ-CD-MOF crystals are treated under conditions of high temperature (100°C), high humidity (92.5%) and polar solvents (e.g., MeOH and DMF). In relation to drug adsorption by γ-CD-MOFs, most of the drug molecules containing carboxyl groups showed relatively high adsorption (>5%), while low adsorption (synthesis and size control of γ-CD-MOFs, the crystalline stability and drug adsorption characteristics of γ-CD-MOF crystals have been evaluated as a fundamental requirement of a potential vehicle for drug delivery.

  6. Bilayer polymer/oxide coating for electroluminescent organic semiconductors

    DEFF Research Database (Denmark)

    Tavares, Luciana

    Organic materials have been given much attention due to their intriguing properties that can be tailored via synthetic chemistry for specific applications combined with their low price and fairly straight-forward large-scale synthesis. Para-hexaphenylene (p6P) nanofibers emit polarized light...... of the fibers with oxygen. We have developed a bilayer coating that does not change significantly the p6P spectrum but strongly reduces bleaching. This bilayer coating consists of a first layer of a stable polymer (PMMA) on top of the organic nanofibers as a protecting layer for avoiding modifications of the p6...

  7. Bilayer polymer/oxide coating for organic semiconductors

    DEFF Research Database (Denmark)

    Tavares, Luciana; Kjelstrup-Hansen, Jakob; Rubahn, Horst-Günter

    Organic materials have been given much attention due to their intriguing properties that can be tailored via synthetic chemistry for specific applications combined with their low price and fairly straight-forward large-scale synthesis. p6P nanofibers can emit polarized light with a highly...... not interfere with the luminescence spectrum from the p6P but it is also not effective in stopping the bleaching. On the other hand, the use of a nonreactant and stable polymer (PMMA) as a direct contact layer on top of the organic nanofibers works as a protecting layer for avoiding modifications of the p6P...

  8. Crystalline fibres of a covalent organic framework through bottom-up microfluidic synthesis.

    Science.gov (United States)

    Rodríguez-San-Miguel, David; Abrishamkar, Afshin; Navarro, Jorge A R; Rodriguez-Trujillo, Romen; Amabilino, David B; Mas-Ballesté, Ruben; Zamora, Félix; Puigmartí-Luis, Josep

    2016-07-28

    A microfluidic chip has been used to prepare fibres of a porous polymer with high structural order, setting a precedent for the generation of a wide variety of materials using this reagent mixing approach that provides unique materials not accessible easily through bulk processes. The reaction between 1,3,5-tris(4-aminophenyl)benzene and 1,3,5-benzenetricarbaldehyde in acetic acid under continuous microfluidic flow conditions leads to the formation of a highly crystalline and porous covalent organic framework (hereafter denoted as MF-COF-1), consisting of fibrillar micro-structures, which have mechanical stability that allows for direct drawing of objects on a surface.

  9. Synthesis and characterization of organic-inorganic hybrids formed between conducting polymers and crystalline antimonic acid

    Directory of Open Access Journals (Sweden)

    Beleze Fábio A.

    2001-01-01

    Full Text Available In this paper we report the synthesis and characterization of novel organic-inorganic hybrid materials between the crystalline antimonic acid (CAA and two conductive polymers: polypyrrole and polyaniline. The hybrids were obtained by in situ oxidative polymerization of monomers by the Sb(V present in the pyrochlore-like CAA structure. The materials were characterized by infrared and Raman spectroscopy, X-ray diffraction, cyclic voltammetry, CHN elemental analysis and electronic paramagnetic resonance spectroscopy. The results showed that both polymers were formed in their oxidized form, with the CAA structure acting as a counter anion.

  10. Solution-grown organic single-crystalline donor-acceptor heterojunctions for photovoltaics.

    Science.gov (United States)

    Li, Hanying; Fan, Congcheng; Fu, Weifei; Xin, Huolin L; Chen, Hongzheng

    2015-01-12

    Organic single crystals are ideal candidates for high-performance photovoltaics due to their high charge mobility and long exciton diffusion length; however, they have not been largely considered for photovoltaics due to the practical difficulty in making a heterojunction between donor and acceptor single crystals. Here, we demonstrate that extended single-crystalline heterojunctions with a consistent donor-top and acceptor-bottom structure throughout the substrate can be simply obtained from a mixed solution of C60 (acceptor) and 3,6-bis(5-(4-n-butylphenyl)thiophene-2-yl)-2,5-bis(2-ethylhexyl)pyrrolo[3,4-c]pyrrole-1,4-dione (donor). 46 photovoltaic devices were studied with the power conversion efficiency of (0.255±0.095)% under 1 sun, which is significantly higher than the previously reported value for a vapor-grown organic single-crystalline donor-acceptor heterojunction (0.007%). As such, this work opens a practical avenue for the study of organic photovoltaics based on single crystals.

  11. The impact of powder diffraction on the structural characterization of organic crystalline materials.

    Science.gov (United States)

    Tremayne, Maryjane

    2004-12-15

    The bulk properties of organic crystalline materials depend on their molecular and crystal structures but, as many of these materials cannot be prepared in a suitable form for conventional single-crystal diffraction studies, structural characterization and rationalization of these properties must be obtained from powder diffraction data. The recent development of direct-space structure solution methods has enabled the study of a wide range of organic materials using powder diffraction data, many of structural complexity only made tractable by these advances in methodology. These direct-space methods are based on a number of global optimization techniques including Monte Carlo, simulated annealing, genetic algorithm and differential evolution approaches. In this article, the implementation and relative efficiency and reliability of these methods are discussed, and their impact on the structural study of organic materials is illustrated by examples of polymorphic systems, pharmaceutical, pigment and polypeptide structures and compounds used in the study of intermolecular networks.

  12. A General Method for Growing Two-Dimensional Crystals of Organic Semiconductors by "Solution Epitaxy".

    Science.gov (United States)

    Xu, Chunhui; He, Ping; Liu, Jie; Cui, Ajuan; Dong, Huanli; Zhen, Yonggang; Chen, Wei; Hu, Wenping

    2016-08-08

    Two-dimensional (2D) crystals of organic semiconductors (2DCOS) have attracted attention for large-area and low-cost flexible optoelectronics. However, growing large 2DCOS in controllable ways and transferring them onto technologically important substrates, remain key challenges. Herein we report a facile, general, and effective method to grow 2DCOS up to centimeter size which can be transferred to any substrate efficiently. The method named "solution epitaxy" involves two steps. The first is to self-assemble micrometer-sized 2DCOS on water surface. The second is epitaxial growth of them into millimeter or centimeter sized 2DCOS with thickness of several molecular layers. The general applicability of this method for the growth of 2DCOS is demonstrated by nine organic semiconductors with different molecular structures. Organic field-effect transistors (OFETs) based on the 2DCOS demonstrated high performance, confirming the high quality of the 2DCOS.

  13. Lewis Acid-Base Chemistry of 7-Azaisoindigo-Based Organic Semiconductors.

    Science.gov (United States)

    Randell, Nicholas M; Fransishyn, Kyle M; Kelly, Timothy L

    2017-07-26

    Low-band-gap organic semiconductors are important in a variety of organic electronics applications, such as organic photovoltaic devices, photodetectors, and field effect transistors. Building on our previous work, which introduced 7-azaisoindigo as an electron-deficient building block for the synthesis of donor-acceptor organic semiconductors, we demonstrate how Lewis acids can be used to further tune the energies of the frontier molecular orbitals. Coordination of a Lewis acid to the pyridinic nitrogen of 7-azaisoindigo greatly diminishes the electron density in the azaisoindigo π-system, resulting in a substantial reduction in the lowest unoccupied molecular orbital (LUMO) energy. This results in a smaller highest occupied molecular orbital-LUMO gap and shifts the lowest-energy electronic transition well into the near-infrared region. Both H(+) and BF3 are shown to coordinate to azaisoindigo and affect the energy of the S0 → S1 transition. A combination of time-dependent density functional theory and UV/vis and (1)H NMR spectroscopic titrations reveal that when two azaisoindigo groups are present and high concentrations of acid are used, both pyridinic nitrogens bind Lewis acids. Importantly, we demonstrate that this acid-base chemistry can be carried out at the solid-vapor interface by exposing thin films of aza-substituted organic semiconductors to vapor-phase BF3·Et2O. This suggests the possibility of using the BF3-bound 7-azaisoindigo-based semiconductors as n-type materials in various organic electronic applications.

  14. Hybrid polaritons in a resonant inorganic/organic semiconductor microcavity

    Energy Technology Data Exchange (ETDEWEB)

    Höfner, M., E-mail: mhoefner@physik.hu-berlin.de; Sadofev, S.; Henneberger, F. [Institut für Physik, Humboldt-Universität zu Berlin, Newtonstr.15, 12489 Berlin (Germany); Kobin, B.; Hecht, S. [Institut für Chemie, Humboldt-Universität zu Berlin, Brook-Taylor-Str. 2, 12489 Berlin (Germany)

    2015-11-02

    We demonstrated the strong coupling regime in a hybrid inorganic-organic microcavity consisting of (Zn,Mg)O quantum wells and ladder-type oligo(p-phenylene) molecules embedded in a polymer matrix. A Fabry-Pérot cavity is formed by an epitaxially grown lower ZnMgO Bragg reflector and a dielectric mirror deposited atop of the organic layer. A clear anticrossing behavior of the polariton branches related to the Wannier-Mott and Frenkel excitons, and the cavity photon mode with a Rabi-splitting reaching 50 meV, is clearly identified by angular-dependent reflectivity measurements at low temperature. By tailoring the structural design, an equal mixing with weights of about 0.3 for all three resonances is achieved for the middle polariton branch at an incidence angle of about 35°.

  15. Negative thermal expansion due to negative area compressibility in TlGaSe2 semiconductor with layered crystalline structure

    Science.gov (United States)

    Seyidov, MirHasan Yu.; Suleymanov, Rauf A.

    2010-09-01

    We conducted comparison of the original experimental data of the temperature dependences of thermal expansion in crystals with layered crystalline structure. It is shown that in most crystals with layered structure (graphite, boron nitride, GaSe, GaS, and InSe) the effect of negative thermal expansion can be explained by the specific character of the phonon spectra. It was shown, that in contrast to other crystals with layered structure, negative thermal expansion in the layers' plane of TlGaSe2 is the result of negative area compressibility. We demonstrate that the thermal expansion of TlGaSe2 crystals can be controlled by illumination, external electric field, and thermal annealing. The nature of observed effects and a special mechanism of the negative area compressibility in TlGaSe2 crystals are discussed.

  16. Bilayer polymer/oxide coating for organic semiconductors

    DEFF Research Database (Denmark)

    Tavares, Luciana; Kjelstrup-Hansen, Jakob; Rubahn, Horst-Günter

    of the nanofibers with oxygen. Operation of devices in vacuum is a solution but the equipment necessary makes impossible the manufacturing of the devices so we propose the use of a coating for reducing bleaching. It is observed that spin-coated PMMA do not damage the morphology of the fragile nanofibers and also do...... not interfere with the luminescence spectrum from the p6P but it is also not effective in stopping the bleaching. On the other hand, the use of a nonreactant and stable polymer (PMMA) as a direct contact layer on top of the organic nanofibers works as a protecting layer for avoiding modifications of the p6P...

  17. Organic semiconductors as real-time radiation detectors

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, T., E-mail: tsuzuki@hep.sc.niigata-u.ac.jp [Graduate School of Science and Technology, Niigata University, Niigata 950-2181 (Japan); Miyata, H., E-mail: miyata@hep.sc.niigata-u.ac.jp [Department of Physics, Niigata University, Niigata 950-2181 (Japan); Katsumata, M. [Department of Physics, Niigata University, Niigata 950-2181 (Japan); Nakano, S.; Matsuda, K. [Graduate School of Science and Technology, Niigata University, Niigata 950-2181 (Japan); Tamura, M. [Carlit Holdings Co., Ltd., Tokyo 104-0031 (Japan)

    2014-11-01

    In this study, the possibility of using π-conjugated organic semiconducting polymers as real-time radiation detectors was explored. Polyaniline (PAni) was used to fabricate radiation sensors because of its relative long-term stability in air. Each fabricated sensor was then subjected to irradiation by α- and β-particles, and the real-time response was measured. The multichannel analyzer (MCA) data of the response signal for each irradiation was acquired and the detection efficiency, relative to the electrode bias voltage of the detector, was extracted.

  18. Monte Carlo simulations of charge transport in heterogeneous organic semiconductors

    Science.gov (United States)

    Aung, Pyie Phyo; Khanal, Kiran; Luettmer-Strathmann, Jutta

    2015-03-01

    The efficiency of organic solar cells depends on the morphology and electronic properties of the active layer. Research teams have been experimenting with different conducting materials to achieve more efficient solar panels. In this work, we perform Monte Carlo simulations to study charge transport in heterogeneous materials. We have developed a coarse-grained lattice model of polymeric photovoltaics and use it to generate active layers with ordered and disordered regions. We determine carrier mobilities for a range of conditions to investigate the effect of the morphology on charge transport.

  19. A gated four probe technique for field effect measurements on disordered organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Hauff, E. von; Spethmann, N.; Parisi, J. [Carl von Ossietzky Univ. of Oldenburg (Germany). Dept. for Energy and Semiconductor Research

    2008-09-15

    A gated four probe measurement technique to isolate contact resistances in field effect measurements on disordered organic semiconductors was investigated. Organic field effect transistors (OFETs) were prepared with two additional electrodes in the contact geometry protruding into the source-drain channel to monitor the variation in potential across the channel. Two high impedance electrometers were used to determine the potential at the contacts. This technique allows to directly determine the magnitude of the parasitic contact resistances between metal contact and organic semiconductor from the drop in potential at the contact regions. The effects of contact resistances, which can falsify measurements on bulk transport parameters such as the field effect mobility, can be then eliminated during material characterization. Additionally, the temperature and electric field dependence of the contact resistances offers valuable information about the charge injection and extraction processes between metal and organic semiconductor. The effects of the four probe geometry, specifically the effect of the channel electrodes on the current-voltage characteristics, of hole transport in a polythiophene (P3HT) OFET with Au contacts were investigated and found not to influence device performance, except at currents <<1 nA. The IV characteristics were shown to follow the expected FET behaviour. From the variation in potential along the channel it was found that contact resistances at the source contact (charge injecting contact) are minimal while contact resistances at the drain contact (charge extracting contact) are significant, resulting in a much lower effective source-drain voltage than that applied to the device. (orig.)

  20. Thermionic emission and tunneling at carbon nanotube-organic semiconductor interface.

    Science.gov (United States)

    Sarker, Biddut K; Khondaker, Saiful I

    2012-06-26

    We study the charge carrier injection mechanism across the carbon nanotube (CNT)-organic semiconductor interface using a densely aligned carbon nanotube array as electrode and pentacene as organic semiconductor. The current density-voltage (J-V) characteristics measured at different temperatures show a transition from a thermal emission mechanism at high temperature (above 200 K) to a tunneling mechanism at low temperature (below 200 K). A barrier height of ∼0.16 eV is calculated from the thermal emission regime, which is much lower compared to the metal/pentacene devices. At low temperatures, the J-V curves exhibit a direct tunneling mechanism at low bias, corresponding to a trapezoidal barrier, while at high bias the mechanism is well described by Fowler-Nordheim tunneling, which corresponds to a triangular barrier. A transition from direct tunneling to Fowler-Nordheim tunneling further signifies a small injection barrier at the CNT/pentacene interface. Our results presented here are the first direct experimental evidence of low charge carrier injection barrier between CNT electrodes and an organic semiconductor and are a significant step forward in realizing the overall goal of using CNT electrodes in organic electronics.

  1. To the theory of hybrid organics/semiconductor nanostructures in microcavity

    Science.gov (United States)

    Dubovskiy, O. A.; Agranovich, V. M.

    2017-02-01

    We consider the hybrid structure in microcavity where the energy of Frenkel exciton in organic layer is equal to the energy of Wannier - Mott exciton in semiconductor quantum well (QW). The exciton located in QW of semiconductor layer can interact with molecules of organic layer and under influence of this interaction can change the position jumping and exciting one of organic molecules. The exciton located in molecule of organic layer also can change the position jumping to semiconductor QW. The number of such jumps depends on the intensity of interaction. In the paper we consider the influence of direct Coulomb dipole-dipole interaction and indirect interaction through the optical field of microcavity on the kinetics of excitation. It was shown that the dispersion of hybrid states are modified by Coulomb interaction particularly when the distance between layers is enough small. The lowest branch of dispersion curves with deep minimum at nonzero wave vector may be useful in the studies of the condensation of low energy hybrid excitations.

  2. Discotic liquid crystals: a new generation of organic semiconductors.

    Science.gov (United States)

    Sergeyev, Sergey; Pisula, Wojciech; Geerts, Yves Henri

    2007-12-01

    Discotic (disc-like) molecules typically comprising a rigid aromatic core and flexible peripheral chains have been attracting growing interest because of their fundamental importance as model systems for the study of charge and energy transport and due to the possibilities of their application in organic electronic devices. This critical review covers various aspects of recent research on discotic liquid crystals, in particular, molecular design concepts, supramolecular structure, processing into ordered thin films and fabrication of electronic devices. The chemical structure of the conjugated core of discotic molecules governs, to a large extent, their intramolecular electronic properties. Variation of the peripheral flexible chains and of the aromatic core is decisive for the tuning of self-assembly in solution and in bulk. Supramolecular organization of discotic molecules can be effectively controlled by the choice of the processing methods. In particular, approaches to obtain suitable macroscopic orientations of columnar superstructures on surfaces, that is, planar uniaxial or homeotropic alignment, are discussed together with appropriate processing techniques. Finally, an overview of charge transport in discotic materials and their application in optoelectronic devices is given.

  3. Nanophase Engineering of Organic Semiconductor-based Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Shao, Ming [ORNL; Keum, Jong Kahk [ORNL; Geohegan, David B [ORNL; Xiao, Kai [ORNL

    2015-01-01

    Organic photovoltaics are promising low-cost, easily-processable energy sources of the future, and are the subject of current academic and industrial interest. In order to achieve the envisioned device efficiencies to surpass commercialization target values, several challenges must be met: (1) to design and synthesize conjugated molecules with low optical bandgaps and optimized electronic energy levels, (2) optimization the morphology of donor/acceptor interpenetrating networks by controlling nanoscale phase separation and self-assembly, and (3) precise tuning of the active layer/electrode interfaces and donor/acceptor interfaces for optimized charge transfer. Here, we focus on recent advances in: (i) synthetic strategies for low-bandgap conjugated polymers and novel fullerene acceptors, (ii) processing to tune film morphologies by solvent annealing, thermal annealing, and the use of solvent additives and compatibilizers, and (iii) engineering of active layer/electrode interfaces and donor/acceptor interfaces with self-assembled monolayer dipoles.

  4. Molecular docking sites designed for the generation of highly crystalline covalent organic frameworks

    Science.gov (United States)

    Ascherl, Laura; Sick, Torben; Margraf, Johannes T.; Lapidus, Saul H.; Calik, Mona; Hettstedt, Christina; Karaghiosoff, Konstantin; Döblinger, Markus; Clark, Timothy; Chapman, Karena W.; Auras, Florian; Bein, Thomas

    2016-04-01

    Covalent organic frameworks (COFs) formed by connecting multidentate organic building blocks through covalent bonds provide a platform for designing multifunctional porous materials with atomic precision. As they are promising materials for applications in optoelectronics, they would benefit from a maximum degree of long-range order within the framework, which has remained a major challenge. We have developed a synthetic concept to allow consecutive COF sheets to lock in position during crystal growth, and thus minimize the occurrence of stacking faults and dislocations. Hereby, the three-dimensional conformation of propeller-shaped molecular building units was used to generate well-defined periodic docking sites, which guided the attachment of successive building blocks that, in turn, promoted long-range order during COF formation. This approach enables us to achieve a very high crystallinity for a series of COFs that comprise tri- and tetradentate central building blocks. We expect this strategy to be transferable to a broad range of customized COFs.

  5. Crystalline capsules: metal-organic frameworks locked by size-matching ligand bolts.

    Science.gov (United States)

    Wang, Hao; Xu, Jian; Zhang, Da-Shuai; Chen, Qiang; Wen, Rong-Mei; Chang, Ze; Bu, Xian-He

    2015-05-11

    Metal-organic frameworks (MOFs) are shown to be good examples of a new class of crystalline porous materials for guest encapsulation. Since the encapsulation/release of guest molecules in MOF hosts is a reversible process in nature, how to prevent the leaching of guests from the open pores with minimal and nondestructive modifications of the structure is a critical issue. To address this issue, we herein propose a novel strategy of encapsulating guests by introducing size-matching organic ligands as bolts to lock the pores of the MOFs through deliberately anchoring onto the open metal sites in the pores. Our proposed strategy provides a mechanical way to prevent the leaching of guests and thereby has less dependence on the specific chemical environment of the hosts, thus making it applicable for a wide variety of existing MOFs once the size-matching ligands are employed.

  6. Purcell effect in an organic-inorganic halide perovskite semiconductor microcavity system

    Science.gov (United States)

    Wang, Jun; Cao, Runan; Da, Peimei; Wang, Yafeng; Hu, Tao; Wu, Lin; Lu, Jian; Shen, Xuechu; Xu, Fei; Zheng, Gengfeng; Chen, Zhanghai

    2016-01-01

    Organic-inorganic halide perovskite semiconductors with the attractive physics properties, including strong photoluminescence (PL), huge oscillator strengths, and low nonradiative recombination losses, are ideal candidates for studying the light-matter interaction in nanostructures. Here, we demonstrate the coupling of the exciton state and the cavity mode in the lead halide perovskite microcavity system at room temperature. The Purcell effect in the coupling system is clearly observed by using angle-resolved photoluminescence spectra. Kinetic analysis based on time-resolved PL reveals that the spontaneous emission rate of the halide perovskite semiconductor is significantly enhanced at resonance of the exciton energy and the cavity mode. Our results provide the way for developing electrically driven organic polariton lasers, optical devices, and on-chip coherent quantum light sources.

  7. Purcell effect in an organic-inorganic halide perovskite semiconductor microcavity system

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jun; Wang, Yafeng; Hu, Tao; Wu, Lin; Shen, Xuechu; Chen, Zhanghai, E-mail: lujian@fudan.edu.cn, E-mail: zhanghai@fudan.edu.cn [State Key Laboratory of Surface Physics, Key Laboratory of Micro and Nano Photonic Structures (Ministry of Education), Department of Physics, Collaborative Innovation Center of Advanced Microstructures, Fudan University, Shanghai 200433 (China); Cao, Runan; Xu, Fei [Department of Physics, Shanghai University, Shanghai 200444 (China); Da, Peimei; Zheng, Gengfeng [Laboratory of Advanced Materials, Department of Chemistry, Fudan University, Shanghai 200433 (China); Lu, Jian, E-mail: lujian@fudan.edu.cn, E-mail: zhanghai@fudan.edu.cn [State Key Laboratory of Surface Physics, Key Laboratory of Micro and Nano Photonic Structures (Ministry of Education), Department of Physics, Collaborative Innovation Center of Advanced Microstructures, Fudan University, Shanghai 200433 (China); Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai 201210 (China)

    2016-01-11

    Organic-inorganic halide perovskite semiconductors with the attractive physics properties, including strong photoluminescence (PL), huge oscillator strengths, and low nonradiative recombination losses, are ideal candidates for studying the light-matter interaction in nanostructures. Here, we demonstrate the coupling of the exciton state and the cavity mode in the lead halide perovskite microcavity system at room temperature. The Purcell effect in the coupling system is clearly observed by using angle-resolved photoluminescence spectra. Kinetic analysis based on time-resolved PL reveals that the spontaneous emission rate of the halide perovskite semiconductor is significantly enhanced at resonance of the exciton energy and the cavity mode. Our results provide the way for developing electrically driven organic polariton lasers, optical devices, and on-chip coherent quantum light sources.

  8. Phenomenological model for charge dynamics and optical response of disordered systems: application to organic semiconductors

    OpenAIRE

    Fratini, Simone; Ciuchi, Sergio; Mayou, Didier

    2014-01-01

    We provide a phenomenological formula which describes the low-frequency optical absorption of charge carriers in disordered systems with localization. This allows to extract, from experimental data on the optical conductivity, the relevant microscopic parameters determining the transport properties, such as the carrier localization length and the elastic and inelastic scattering times. This general formula is tested and applied here to organic semiconductors, where dynamical molecular disorde...

  9. A scale-bridging modeling approach for anisotropic organic molecules at patterned semiconductor surfaces

    OpenAIRE

    Kleppmann, Nicola; Klapp, Sabine H. L.

    2014-01-01

    Hybrid systems consisting of organic molecules at inorganic semiconductor surfaces are gaining increasing importance as thin film devices for optoelectronics. The efficiency of such devices strongly depends on the collective behavior of the adsorbed molecules. In the present paper we propose a novel, coarse-grained model addressing the condensed phases of a representative hybrid system, that is, para-sexiphenyl (6P) at zinc-oxide (ZnO). Within our model, intermolecular interactions are repre-...

  10. A hybrid organic semiconductor/silicon photodiode for efficient ultraviolet photodetection.

    Science.gov (United States)

    Levell, J W; Giardini, M E; Samuel, I D W

    2010-02-15

    A method employing conjugated polymer thin film blends is shown to provide a simple and convenient way of greatly enhancing the ultraviolet response of silicon photodetectors. Hybrid organic semiconductor/silicon photodetectors are demonstrated using fluorene copolymers and give a quantum efficiency of 60% at 200 nm. The quantum efficiency is greater than 34% over the entire 200-620 nm range. These devices show promise for use in high sensitivity, low cost UV-visible photodetection and imaging applications.

  11. Charge-carrier relaxation in disordered organic semiconductors studied by dark injection: Experiment and modeling

    Science.gov (United States)

    Mesta, M.; Schaefer, C.; de Groot, J.; Cottaar, J.; Coehoorn, R.; Bobbert, P. A.

    2013-11-01

    Understanding of stationary charge transport in disordered organic semiconductors has matured during recent years. However, charge-carrier relaxation in nonstationary situations is still poorly understood. Such relaxation can be studied in dark injection experiments, in which the bias applied over an unilluminated organic semiconductor device is abruptly increased. The resulting transient current reveals both charge-carrier transport and relaxation characteristics. We performed such experiments on hole-only devices of a polyfluorene-based organic semiconductor. Modeling the dark injection by solving a one-dimensional master equation using the equilibrium carrier mobility leads to a too-slow current transient, since this approach does not account for carrier relaxation. Modeling by solving a three-dimensional time-dependent master equation does take into account all carrier transport and relaxation effects. With this modeling, the time scale of the current transient is found to be in agreement with experiment. With a disorder strength somewhat smaller than extracted from the temperature-dependent stationary current-voltage characteristics, also the shape of the experimental transients is well described.

  12. Polarization-Sensitive Two-Photon Microscopy Study of the Organization of Liquid-Crystalline DNA

    Science.gov (United States)

    Mojzisova, Halina; Olesiak, Joanna; Zielinski, Marcin; Matczyszyn, Katarzyna; Chauvat, Dominique; Zyss, Joseph

    2009-01-01

    Abstract Highly concentrated DNA solutions exhibit self-ordering properties such as the generation of liquid-crystalline phases. Such organized domains may play an important role in the global chromatin topology but can also be used as a simple model for the study of more complex 3D DNA structures. In this work, using polarized two-photon fluorescence microscopy, we report on the orientation of DNA molecules in liquid-crystalline phases. For this purpose, we analyze the signal emitted by fluorophores that are noncovalently bound to DNA strands. In nonlinear processes, excitation occurs exclusively in the focal volume, which offers advantages such as the reduction of photobleaching of out-of-focus molecules and intrinsic 3D sectioning capability. Propidium iodide and Hoechst, two fluorophores with different DNA binding modes, have been considered. Polarimetric measurements show that the dyes follow the alignment with respect to the DNA strands and allow the determination of the angles between the emission dipoles and the longitudinal axis of the DNA double strand. These results provide a useful starting point toward the application of two-photon polarimetry techniques to determine the local orientation of condensed DNA in physiological conditions. PMID:19843467

  13. Chemical preparation of crystalline, nonmolecular solids, including solution-liquid-solid (SLS) growth of semiconductor fibers and varied routes to nanocrystalline molybdenum disilicide

    Science.gov (United States)

    Trentler, Timothy John

    New methods for the preparation of crystalline, nonmolecular solids under milder conditions and/or with control of crystallite size or morphology were developed in two separate projects. In one project, polycrystalline 13-15 semiconductor fibers (dimensions 10-100 nm x 50-1000 nm) were grown by solution-based chemical methods. Crystal precursor species of the general formula (Rsb{x}InEHsb{x}rbracksb{n}, where E is a pnictide and R is an alkyl group, were prepared by the phosphinolysis or arsinolysis of alkylindanes in aromatic solvents. Thermal decomposition of these precursors in solution, which was catalyzed by various protic reagents (MeOH, PhSH, Etsb2NH, or PhCOsb2H), resulted in crystalline InE when In metal was present in the form of submicron droplets dispersed in the solvent. Crystallization was determined to occur (at the lowest temperatures reported for 13-15 semiconductors, liquid-solid (SLS) mechanism reminiscent of vapor-liquid-solid (VLS) growth of single-crystal whiskers. Some analogous reactions were investigated in which t-Busb3Ga was mixed with the alkylindane in order to prepare ternary alloys (Insb{x}Gasb{1-x}As). Product crystallinity and composition was dependent on, though not exclusively determined by, the indane/gallane ratio. Crystals with composition within the miscibility gap for this alloy system were grown. The focus of the other project was the preparation of nanocrystalline (crystallite dimensions NaK alloy in an ultrasonically agitated hydrocarbon solvent followed by thermal processing (900sp°C) under vacuum to eliminate byproduct salts. MoSisb2 crystallites averaging 20-50 nm were obtained. Solvent degradation during this process resulted in the incorporation of substantial carbonaceous impurity (believed to be SiC) in these products. To eliminate the carbon, similar solventless reductions (without ultrasound) were conducted in molten magnesium, but average particle sizes have not been refined into the nanometer regime (currently

  14. In Situ Fabrication of ZnS Semiconductor Nanoparticles in Layered Organic-inorganic Solid Template

    Institute of Scientific and Technical Information of China (English)

    Bao Lin ZHU; Xiao CHEN; Zhen Ming SUI; Li Mei XU; Chun Jie YANG; Ji Kuan ZHAO; Jie LIU

    2004-01-01

    Ordered ZnS semiconductor nanoparticles were in situ synthesized in metal halide perovskite organic/inorganic layered hybrids (CnH2n+1NH3)2ZnCl4 (n=10 and 12) by reaction of their spin-casting films with H2S gas. Transmission electron microscopy, UV-vis spectroscopy and small-angle X-ray diffraction were used to characterize the morphology and the structure of formed nanoparticles. Obtained results indicate an effective way to incorporate functional inorganic nanoparticles into structured organic matrices.

  15. Integrated Materials Design of Organic Semiconductors for Field-Effect Transistors

    KAUST Repository

    Mei, Jianguo

    2013-05-08

    The past couple of years have witnessed a remarkable burst in the development of organic field-effect transistors (OFETs), with a number of organic semiconductors surpassing the benchmark mobility of 10 cm2/(V s). In this perspective, we highlight some of the major milestones along the way to provide a historical view of OFET development, introduce the integrated molecular design concepts and process engineering approaches that lead to the current success, and identify the challenges ahead to make OFETs applicable in real applications. © 2013 American Chemical Society.

  16. Microscopic modeling of magnetic-field effects on charge transport in organic semiconductors

    Science.gov (United States)

    Schellekens, A. J.; Wagemans, W.; Kersten, S. P.; Bobbert, P. A.; Koopmans, B.

    2011-08-01

    The stochastic Liouville equation is applied to the field of organic magnetoresistance to perform detailed microscopic calculations on the different proposed models. By adapting this equation, the influence of a magnetic field on the current in bipolaron, electron-hole pair, and triplet models is calculated. The simplicity and wide applicability of the stochastic Liouville equation makes it a powerful tool for interpreting experimental results on magnetoresistance measurements in organic semiconductors. New insights are gained on the influence of hopping rates and disorder on the magnetoresistance.

  17. Theory of coupled hybrid inorganic/organic systems: Excitation transfer at semiconductor/molecule interfaces

    Science.gov (United States)

    Specht, Judith; Verdenhalven, Eike; Theuerholz, Sverre; Knorr, Andreas; Richter, Marten

    2016-03-01

    We derive a theoretical framework for describing hybrid organic-inorganic systems consisting of an ordered organic molecular layer coupled to a semiconductor quantum well (e.g., ZnO). A Heisenberg equation of motion technique based on a density matrix formalism is applied to derive dynamical equations for the composite system on a mesoscopic scale. Our theoretical approach focuses on the inuence of nonradiative Förster excitation transfer across the hybrid interface on linear optical absorption spectra. Therefore, the dielectric screening is discussed at the interface of two materials with different dielectric constants. Moreover, the Förster transfer matrix element is calculated in the point-dipole approximation. For a consistent theoretical description of both constituents (i.e., the molecular layer and the semiconductor substrate), the problem is treated in momentum space. Solving the equations of motion for the microscopic polarizations in frequency space directly leads to an equation for the frequency-dependent linear absorption coefficient. Our theoretical approach forms the basis for studying parameter regimes and geometries with optimized excitation transfer efficiency across the semiconductor/ molecule interface.

  18. Reducing dynamic disorder in small-molecule organic semiconductors by suppressing large-amplitude thermal motions.

    Science.gov (United States)

    Illig, Steffen; Eggeman, Alexander S; Troisi, Alessandro; Jiang, Lang; Warwick, Chris; Nikolka, Mark; Schweicher, Guillaume; Yeates, Stephen G; Henri Geerts, Yves; Anthony, John E; Sirringhaus, Henning

    2016-02-22

    Thermal vibrations and the dynamic disorder they create can detrimentally affect the transport properties of van der Waals bonded molecular semiconductors. The low-energy nature of these vibrations makes it difficult to access them experimentally, which is why we still lack clear molecular design rules to control and reduce dynamic disorder. In this study we discuss the promising organic semiconductors rubrene, 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothio-phene and 2,9-di-decyl-dinaphtho-[2,3-b:20,30-f]-thieno-[3,2-b]-thiophene in terms of an exceptionally low degree of dynamic disorder. In particular, we analyse diffuse scattering in transmission electron microscopy, to show that small molecules that have their side chains attached along the long axis of their conjugated core are better encapsulated in their crystal structure, which helps reduce large-amplitude thermal motions. Our work provides a general strategy for the design of new classes of very high mobility organic semiconductors with a low degree of dynamic disorder.

  19. Energy resolved electrochemical impedance spectroscopy for electronic structure mapping in organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Nádaždy, V., E-mail: nadazdy@savba.sk; Gmucová, K. [Institute of Physics SAS, Dúbravská cesta 9, 845 11 Bratislava (Slovakia); Schauer, F. [Faculty of Education, Trnava University in Trnava, 918 43 Trnava (Slovakia); Faculty of Applied Informatics, Tomas Bata University in Zlin, 760 05 Zlin (Czech Republic)

    2014-10-06

    We introduce an energy resolved electrochemical impedance spectroscopy method to map the electronic density of states (DOS) in organic semiconductor materials. The method consists in measurement of the charge transfer resistance of a semiconductor/electrolyte interface at a frequency where the redox reactions determine the real component of the impedance. The charge transfer resistance value provides direct information about the electronic DOS at the energy given by the electrochemical potential of the electrolyte, which can be adjusted using an external voltage. A simple theory for experimental data evaluation is proposed, along with an explanation of the corresponding experimental conditions. The method allows mapping over unprecedentedly wide energy and DOS ranges. Also, important DOS parameters can be determined directly from the raw experimental data without the lengthy analysis required in other techniques. The potential of the proposed method is illustrated by tracing weak bond defect states induced by ultraviolet treatment above the highest occupied molecular orbital in a prototypical σ-conjugated polymer, poly[methyl(phenyl)silylene]. The results agree well with those of our previous DOS reconstruction by post-transient space-charge-limited-current spectroscopy, which was, however, limited to a narrow energy range. In addition, good agreement of the DOS values measured on two common π-conjugated organic polymer semiconductors, polyphenylene vinylene and poly(3-hexylthiophene), with the rather rare previously published data demonstrate the accuracy of the proposed method.

  20. Energy resolved electrochemical impedance spectroscopy for electronic structure mapping in organic semiconductors

    Science.gov (United States)

    Nádaždy, V.; Schauer, F.; Gmucová, K.

    2014-10-01

    We introduce an energy resolved electrochemical impedance spectroscopy method to map the electronic density of states (DOS) in organic semiconductor materials. The method consists in measurement of the charge transfer resistance of a semiconductor/electrolyte interface at a frequency where the redox reactions determine the real component of the impedance. The charge transfer resistance value provides direct information about the electronic DOS at the energy given by the electrochemical potential of the electrolyte, which can be adjusted using an external voltage. A simple theory for experimental data evaluation is proposed, along with an explanation of the corresponding experimental conditions. The method allows mapping over unprecedentedly wide energy and DOS ranges. Also, important DOS parameters can be determined directly from the raw experimental data without the lengthy analysis required in other techniques. The potential of the proposed method is illustrated by tracing weak bond defect states induced by ultraviolet treatment above the highest occupied molecular orbital in a prototypical σ-conjugated polymer, poly[methyl(phenyl)silylene]. The results agree well with those of our previous DOS reconstruction by post-transient space-charge-limited-current spectroscopy, which was, however, limited to a narrow energy range. In addition, good agreement of the DOS values measured on two common π-conjugated organic polymer semiconductors, polyphenylene vinylene and poly(3-hexylthiophene), with the rather rare previously published data demonstrate the accuracy of the proposed method.

  1. Glass-sandwich-type organic solar cells utilizing liquid crystalline phthalocyanine

    Science.gov (United States)

    Usui, Toshiki; Nakata, Yuya; De Romeo Banoukepa, Gilles; Fujita, Kento; Nishikawa, Yuki; Shimizu, Yo; Fujii, Akihiko; Ozaki, Masanori

    2017-02-01

    Glass-sandwich-type organic solar cells utilizing liquid crystalline phthalocyanine, 1,4,8,11,15,18,22,25-octahexylphthalocyanine (C6PcH2), have been fabricated and their photovoltaic properties have been studied. The short-circuit current density (J sc) and power conversion efficiency (PCE) depend on the C6PcH2 layer thickness, and the maximum performance, such as a J sc of 7.1 mA/cm2 and a PCE of 1.64%, was demonstrated for a device having a 420-nm-thick C6PcH2 layer. We examined the photovoltaic properties from the viewpoint of the C6PcH2-layer electrical conductance, based on the distribution of the column-axis direction.

  2. Highly efficient crystalline silicon/Zonyl fluorosurfactant-treated organic heterojunction solar cells

    Science.gov (United States)

    Liu, Qiming; Ono, Masahiro; Tang, Zeguo; Ishikawa, Ryo; Ueno, Keiji; Shirai, Hajime

    2012-04-01

    We demonstrate a highly efficient hybrid crystalline silicon (c-Si) based photovoltaic devices with hole-transporting transparent conductive poly-(3,4-ethlenedioxythiophene):poly(styrenesufonic acid) (PEDOT:PSS) films, incorporating a Zonyl fluorosurfactant as an additive, compared to non additive devices. The usage of a 0.1% Zonly treated PEDOT:PSS improved the adhesion of precursor solution on hydrophobic c-Si wafer without any oxidation process. The average power conversion efficiency η value was 10.8%-11.3%, which was superior to those of non-treated devices. Consequently, c-Si/Zonyl-treated PEDOT:PSS heterojunction devices exhibited the highest η of 11.34%. The Zonyl-treated soluble PEDOT:PSS composite is promising as a hole-transporting transparent conducting layer for c-Si/organic photovoltaic applications.

  3. A neuro-evolutive technique applied for predicting the liquid crystalline property of some organic compounds

    Science.gov (United States)

    Drăgoi, Elena-Niculina; Curteanu, Silvia; Lisa, Cătălin

    2012-10-01

    A simple self-adaptive version of the differential evolution algorithm was applied for simultaneous architectural and parametric optimization of feed-forward neural networks, used to classify the crystalline liquid property of a series of organic compounds. The developed optimization methodology was called self-adaptive differential evolution neural network (SADE-NN) and has the following characteristics: the base vector used is chosen as the best individual in the current population, two differential terms participate in the mutation process, the crossover type is binomial, a simple self-adaptive mechanism is employed to determine the near-optimal control parameters of the algorithm, and the integration of the neural network into the differential evolution algorithm is performed using a direct encoding scheme. It was found that a network with one hidden layer is able to make accurate predictions, indicating that the proposed methodology is efficient and, owing to its flexibility, it can be applied to a large range of problems.

  4. Rational design of crystalline supermicroporous covalent organic frameworks with triangular topologies

    Science.gov (United States)

    Dalapati, Sasanka; Addicoat, Matthew; Jin, Shangbin; Sakurai, Tsuneaki; Gao, Jia; Xu, Hong; Irle, Stephan; Seki, Shu; Jiang, Donglin

    2015-07-01

    Covalent organic frameworks (COFs) are an emerging class of highly ordered porous polymers with many potential applications. They are currently designed and synthesized through hexagonal and tetragonal topologies, limiting the access to and exploration of new structures and properties. Here, we report that a triangular topology can be developed for the rational design and synthesis of a new class of COFs. The triangular topology features small pore sizes down to 12 Å, which is among the smallest pores for COFs reported to date, and high π-column densities of up to 0.25 nm-2, which exceeds those of supramolecular columnar π-arrays and other COF materials. These crystalline COFs facilitate π-cloud delocalization and are highly conductive, with a hole mobility that is among the highest reported for COFs and polygraphitic ensembles.

  5. Small molecule organic semiconductors on the move: promises for future solar energy technology.

    Science.gov (United States)

    Mishra, Amaresh; Bäuerle, Peter

    2012-02-27

    This article is written from an organic chemist's point of view and provides an up-to-date review about organic solar cells based on small molecules or oligomers as absorbers and in detail deals with devices that incorporate planar-heterojunctions (PHJ) and bulk heterojunctions (BHJ) between a donor (p-type semiconductor) and an acceptor (n-type semiconductor) material. The article pays particular attention to the design and development of molecular materials and their performance in corresponding devices. In recent years, a substantial amount of both, academic and industrial research, has been directed towards organic solar cells, in an effort to develop new materials and to improve their tunability, processability, power conversion efficiency, and stability. On the eve of commercialization of organic solar cells, this review provides an overview over efficiencies attained with small molecules/oligomers in OSCs and reflects materials and device concepts developed over the last decade. Approaches to enhancing the efficiency of organic solar cells are analyzed.

  6. Organic nanowire/crystalline silicon p-n heterojunctions for high-sensitivity, broadband photodetectors.

    Science.gov (United States)

    Deng, Wei; Jie, Jiansheng; Shang, Qixun; Wang, Jincheng; Zhang, Xiujuan; Yao, Shenwen; Zhang, Qing; Zhang, Xiaohong

    2015-01-28

    Organic/inorganic hybrid devices are promising candidates for high-performance, low-cost optoelectronic devices, by virtue of their unique properties. Polycrystalline/amorphous organic films are widely used in hybrid devices, because defects in the films hamper the improvement of device performance. Here, we report the construction of 2,4-bis[4-(N,N-dimethylamino)phenyl]squaraine (SQ) nanowire (NW)/crystalline Si (c-Si) p-n heterojunctions. Thanks to the high crystal quality of the SQ NWs, the heterojunctions exhibit excellent diode characteristics in darkness. It is significant that the heterojunctions have been found to be capable of detecting broadband light with wavelengths spanning from ultraviolet (UV) light, to visible (Vis) light, to near-infrared (NIR) light, because of the complementary spectrum absorption of SQ NWs with Si. The junction is demonstrated to play a core role in enhancing the device performance, in terms of ultrahigh sensitivity, excellent stability, and fast response. The photovoltaic characteristics of the heterojunctions are further investigated, revealing a power conversion efficiency (PCE) of up to 1.17%. This result also proves the potential of the device as self-powered photodetectors operating at zero external bias voltage. This work presents an important advance in constructing single-crystal organic nanostructure/inorganic heterojunctions and will enable future exploration of their applications in broadband photodetectors and solar cells.

  7. Spin Entangling Effects of Electron and Nucleus on Hopping Transfer in Organic Semiconductors

    Science.gov (United States)

    Zhao, Jun-Qing; Sun, Ling-Ling; Wang, Ting

    2016-05-01

    To study the spin entangling effects on organic magneto-resistance in organic semiconductors, we focused on the entanglement-related hopping transfer of electrons on the basis of the Miller-Abrahams hopping rate. Considering spin entanglement of localized electron with the nucleus in the hopping process, we deduced an attempt hopping rate of electrons as a function of the applied magnetic field and the localized hyperfine interaction, and thus established a model to calculate the organic magneto-resistance. The calculated results show that the magneto-resistance has a maximum in the lower magnetic field, and the corresponding magnetic field Bmax increases with the hyperfine interaction. In the higher magnetic field, the magneto-resistance tends to a negative saturation value. This analysis will be an valuable reference for deep understanding of the organic magneto-resistance.

  8. Organic Semiconductors and Nanodielectrics for Flexible, Low Voltage Thin-Film Transistors

    Science.gov (United States)

    Marks, Tobin

    2006-03-01

    Molecular materials scientists are skilled at designing and constructing individual molecules with the goal of imbuing them with predetermined chemical and physical properties. However, the subsequent task of rationally assembling them into organized, functional supramolecular architectures with precise, nanometer-level control of bulk opt-electronic properties presents another level of challenge. In this lecture, synthetic and computational approaches to addressing such problems are described in which the ultimate goal is the fabrication of flexible electronic circuits employing unconventional materials classes and unconventional fabrication techniques. The issues here concern not only the rational design, realization, and understanding of high-mobility p- and n-type organic semiconductors, but also robust enabling nanoscopic gate dielectrics having ultra-high capacitance, low leakage, and high breakdown fields. In the former area, routes to and properties of, new high-mobility heterocyclic materials are described. These materials are then used to fabricate high-performance organic thin film transistors and CMOS circuits. In the latter topic, the design, synthesis, and characterization of new high-k nanoscopic gate dielectrics are described. It is then shown how these dielectrics can be employed to significantly enhance the performance of thin-film transistors and other devices fabricated from a wide variety of both organic as well as inorganic semiconductors.

  9. Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals

    KAUST Repository

    Niazi, Muhammad R.

    2015-11-23

    Solution-printed organic semiconductors have emerged in recent years as promising contenders for roll-to-roll manufacturing of electronic and optoelectronic circuits. The stringent performance requirements for organic thin-film transistors (OTFTs) in terms of carrier mobility, switching speed, turn-on voltage and uniformity over large areas require performance currently achieved by organic single-crystal devices, but these suffer from scale-up challenges. Here we present a new method based on blade coating of a blend of conjugated small molecules and amorphous insulating polymers to produce OTFTs with consistently excellent performance characteristics (carrier mobility as high as 6.7 cm2 V−1 s−1, low threshold voltages of<1 V and low subthreshold swings <0.5 V dec−1). Our findings demonstrate that careful control over phase separation and crystallization can yield solution-printed polycrystalline organic semiconductor films with transport properties and other figures of merit on par with their single-crystal counterparts.

  10. Surfactant media to grow new crystalline cobalt 1,3,5-benzenetricarboxylate metal-organic frameworks

    KAUST Repository

    Lu, Haisheng

    2014-08-18

    In this report, three new metal-organic frameworks (MOFs), [Co 3(μ3-OH)(HBTC)(BTC)2Co(HBTC)]·(HTEA) 3·H2O (NTU-Z30), [Co(BTC)] ·HTEA·H2O (NTU-Z31), [Co3(BTC) 4]·(HTEA)4 (NTU-Z32), where H3BTC = 1,3,5-benzenetricarboxylic acid, TEA = triethylamine, and NTU = Nanyang Technological University, have been successfully synthesized under surfactant media and have been carefully characterized by single-crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis, and IR spectromtry. NTU-Z30 has an unusual trimeric [Co3(μ3-OH)(COO) 7] secondary building unit (SBU), which is different from the well-known trimeric [Co3O(COO)6] SBU. The topology studies indicate that NTU-Z30 and NTU-Z32 possess two new topologies, 3,3,6,7-c net and 2,8-c net, respectively, while NTU-Z31 has a known topology rtl type (3,6-c net). Magnetic analyses show that all three materials have weak antiferromagnetic behavior. Furthermore, NTU-Z30 has been selected as the heterogeneous catalyst for the aerobic epoxidation of alkene, and our results show that this material exhibits excellent catalytic activity as well as good stability. Our success in growing new crystalline cobalt 1,3,5- benzenetricarboxylate MOFs under surfactant media could pave a new road to preparing new diverse crystalline inorganic materials through a surfactant-thermal method. © 2014 American Chemical Society.

  11. Structural Design Principle of Small-Molecule Organic Semiconductors for Metal-Free, Visible-Light-Promoted Photocatalysis.

    Science.gov (United States)

    Wang, Lei; Huang, Wei; Li, Run; Gehrig, Dominik; Blom, Paul W M; Landfester, Katharina; Zhang, Kai A I

    2016-08-01

    Herein, we report on the structural design principle of small-molecule organic semiconductors as metal-free, pure organic and visible light-active photocatalysts. Two series of electron-donor and acceptor-type organic semiconductor molecules were synthesized to meet crucial requirements, such as 1) absorption range in the visible region, 2) sufficient photoredox potential, and 3) long lifetime of photogenerated excitons. The photocatalytic activity was demonstrated in the intermolecular C-H functionalization of electron-rich heteroaromates with malonate derivatives. A mechanistic study of the light-induced electron transport between the organic photocatalyst, substrate, and the sacrificial agent are described. With their tunable absorption range and defined energy-band structure, the small-molecule organic semiconductors could offer a new class of metal-free and visible light-active photocatalysts for chemical reactions.

  12. Simple way to engineer metal-semiconductor interface for enhanced performance of perovskite organic lead iodide solar cells.

    Science.gov (United States)

    Xu, Yuzhuan; Shi, Jiangjian; Lv, Songtao; Zhu, Lifeng; Dong, Juan; Wu, Huijue; Xiao, Yin; Luo, Yanhong; Wang, Shirong; Li, Dongmei; Li, Xianggao; Meng, Qingbo

    2014-04-23

    A thin wide band gap organic semiconductor N,N,N',N'-tetraphenyl-benzidine layer has been introduced by spin-coating to engineer the metal-semiconductor interface in the hole-conductor-free perovskite solar cells. The average cell power conversion efficiency (PCE) has been enhanced from 5.26% to 6.26% after the modification and a highest PCE of 6.71% has been achieved. By the aid of electrochemical impedance spectroscopy and dark current analysis, it is revealed that this modification can increase interfacial resistance of CH3NH3PbI3/Au interface and retard electron recombination process in the metal-semiconductor interface.

  13. Noble metal-free hydrogen-evolving photocathodes based on small molecule organic semiconductors

    Science.gov (United States)

    Morozan, A.; Bourgeteau, T.; Tondelier, D.; Geffroy, B.; Jousselme, B.; Artero, V.

    2016-09-01

    Organic semiconductors have great potential for producing hydrogen in a sustainable and economically-viable manner because they rely on readily available materials with highly tunable properties. We demonstrate here the relevance of heterojunctions to the construction of H2-evolving photocathodes, exclusively based on earth-abundant elements. Boron subnaphthalocyanine chloride proved a very promising acceptor in that perspective. It absorbs a part of the solar spectrum complementary to α-sexithiophene as a donor, thus generating large photocurrents and providing a record onset potential for light-driven H2 evolution under acidic aqueous conditions using a nanoparticulate amorphous molybdenum sulfide catalyst.

  14. Chemical engineering in the electronics industry: progress towards the rational design of organic semiconductor heterojunctions

    KAUST Repository

    Clancy, Paulette

    2012-05-01

    We review the current status of heterojunction design for combinations of organic semiconductor materials, given its central role in affecting the device performance for electronic devices and solar cell applications. We provide an emphasis on recent progress towards the rational design of heterojunctions that may lead to higher performance of charge separation and mobility. We also play particular attention to the role played by computational approaches and its potential to help define the best choice of materials for solar cell development in the future. We report the current status of the field with respect to such goals. © 2012 Elsevier Ltd.

  15. Towards high charge carrier mobilities by rational design of organic semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Andrienko, Denis; Ruehle, Victor; Baumeier, Bjoern; Vehoff, Thorsten; Lukyanov, Alexander; Kremer, Kurt [Max Planck Institute for Polymer Research, Mainz (Germany); Marcon, Valentina [Technische Universitaet Darmstadt (Germany); Kirkpatrick, James; Nelson, Jenny [Imperial College London (United Kingdom); Lennartz, Christian [BASF AG, Ludwigshafen (Germany)

    2010-07-01

    The role of material morphology on charge carrier mobility in partially disordered organic semiconductors is discussed for several classes of materials: derivatives of hexabenzocoronenens, perylenediimides, triangularly-shaped polyaromatic hydrocarbons, and Alq{sub 3}. Simulations are performed using a package developed by Imperial College, London and Max Planck Institute for Polymer Research, Mainz (votca.org). This package combines several techniques into one scheme: quantum chemical methods for the calculation of molecular electronic structures and reorganization energies; molecular dynamics and systematic coarse-graining approaches for simulation of self-assembly and relative positions and orientations of molecules on large scales; kinetic Monte Carlo and master equation for studies of charge transport.

  16. Ionization sensitization of doping in co-deposited organic semiconductor films

    Energy Technology Data Exchange (ETDEWEB)

    Shinmura, Yusuke, E-mail: shinmura@ims.ac.jp; Yamashina, Yohei; Kaji, Toshihiko; Hiramoto, Masahiro [Institute for Molecular Science, 5-1 Higashiyama, Myodaiji, Okazaki 444-8787, Aichi (Japan); JST, CREST, 5 Sanbancho, Chiyoda-ku, Tokyo 102-0075 (Japan)

    2014-11-03

    Sensitization of the dopant ionization in co-deposited films of organic semiconductors was found. The ionization rate of cesium carbonate (Cs{sub 2}CO{sub 3}), which acts as a donor dopant in single films of metal-free phthalocyanine (H{sub 2}Pc) and fullerene (C{sub 60}), was increased from 10% to 97% in a H{sub 2}Pc:C{sub 60} co-deposited film. A charge separation superlattice model that includes electron transfer from the conduction band of H{sub 2}Pc to that of C{sub 60}, which increases the rate of dopant ionization, is proposed.

  17. High-sensitivity visible-blind UV detectors made with organic semiconductors

    Science.gov (United States)

    Yu, Gang; Cao, Yong; Srdanov, Gordana

    1999-04-01

    High sensitivity visible-blind UV detectors were fabricated with organic semiconductors. The photo-sensitivity at 350 nm reaches 75 mA/Watt, corresponding to quantum efficiency of approximately 27% el/ph. The visible/UV suppression ratio is more than 10(superscript 4) without optical filters. These UV detectors are of linear intensity dependence with fast response time. The simple fabrication process allows these UV detectors to be made in large size, in flexible forms or onto non-planar substrates with low cost. The fabrication process also allows these UV detectors to be integrated with electronic devices or optical devices.

  18. Influence of the semiconductor oxidation potential on the operational stability of organic field-effect transistors

    Science.gov (United States)

    Sharma, A.; Mathijssen, S. G. J.; Bobbert, P. A.; de Leeuw, D. M.

    2011-09-01

    During prolonged application of a gate bias, organic field-effect transistors show a gradual shift of the threshold voltage towards the applied gate bias voltage. The shift follows a stretched-exponential time dependence governed by a relaxation time. Here, we show that a thermodynamic analysis reproduces the observed exponential dependence of the relaxation time on the oxidation potential of the semiconductor. The good fit with the experimental data validates the underlying assumptions. It demonstrates that this operational instability is a straightforward thermodynamically driven process that can only be eliminated by eliminating water from the transistor.

  19. Vacuum-and-solvent-free fabrication of organic semiconductor layers for field-effect transistors

    Science.gov (United States)

    Matsushima, Toshinori; Sandanayaka, Atula S. D.; Esaki, Yu; Adachi, Chihaya

    2015-09-01

    We demonstrate that cold and hot isostatic pressing (CIP and HIP) is a novel, alternative method for organic semiconductor layer fabrication, where organic powder is compressed into a layer shape directly on a substrate with 200 MPa pressure. Spatial gaps between powder particles and the other particles, substrates, or electrodes are crushed after CIP and HIP, making it possible to operate organic field-effect transistors (OFETs) containing the compressed powder as the semiconductor. The CIP-compressed powder of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) had a hole mobility of (1.6 ± 0.4) × 10-2 cm2/Vs. HIP of C8-BTBT powder increased the hole mobility to an amorphous silicon-like value (0.22 ± 0.07 cm2/Vs) because of the growth of the C8-BTBT crystallites and the improved continuity between the powder particles. The vacuum and solution processes are not involved in our CIP and HIP techniques, offering a possibility of manufacturing OFETs at low cost.

  20. Modifying the thermal conductivity of small molecule organic semiconductor thin films with metal nanoparticles.

    Science.gov (United States)

    Wang, Xinyu; Parrish, Kevin D; Malen, Jonathan A; Chan, Paddy K L

    2015-11-04

    Thermal properties of organic semiconductors play a significant role in the performance and lifetime of organic electronic devices, especially for scaled-up large area applications. Here we employ silver nanoparticles (Ag NPs) to modify the thermal conductivity of the small molecule organic semiconductor, dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT). The differential 3-ω method was used to measure the thermal conductivity of Ag-DNTT hybrid thin films. We find that the thermal conductivity of pure DNTT thin films do not vary with the deposition temperature over a range spanning 24 °C to 80 °C. The thermal conductivity of the Ag-DNTT hybrid thin film initially decreases and then increases when the Ag volume fraction increases from 0% to 32%. By applying the effective medium approximation to fit the experimental results of thermal conductivity, the extracted thermal boundary resistance of the Ag-DNTT interface is 1.14 ± 0.98 × 10(-7) m(2)-K/W. Finite element simulations of thermal conductivity for realistic film morphologies show good agreement with experimental results and effective medium approximations.

  1. Solution-grown small-molecule organic semiconductor with enhanced crystal alignment and areal coverage for organic thin film transistors

    Directory of Open Access Journals (Sweden)

    Sheng Bi

    2015-07-01

    Full Text Available Drop casting of small-molecule organic semiconductors typically forms crystals with random orientation and poor areal coverage, which leads to significant performance variations of organic thin-film transistors (OTFTs. In this study, we utilize the controlled evaporative self-assembly (CESA method combined with binary solvent system to control the crystal growth. A small-molecule organic semiconductor,2,5-Di-(2-ethylhexyl-3,6-bis(5″-n-hexyl-2,2′,5′,2″]terthiophen-5-yl-pyrrolo[3,4-c]pyrrole-1,4-dione (SMDPPEH, is used as an example to demonstrate the effectiveness of our approach. By optimizing the double solvent ratios, well-aligned SMDPPEH crystals with significantly improved areal coverage were achieved. As a result, the SMDPPEH based OTFTs exhibit a mobility of 1.6 × 10−2 cm2/V s, which is the highest mobility from SMDPPEH ever reported.

  2. Coherent spin manipulation in molecular semiconductors: getting a handle on organic spintronics.

    Science.gov (United States)

    Lupton, John M; McCamey, Dane R; Boehme, Christoph

    2010-10-04

    Organic semiconductors offer expansive grounds to explore fundamental questions of spin physics in condensed matter systems. With the emergence of organic spintronics and renewed interest in magnetoresistive effects, which exploit the electron spin degree of freedom to encode and transmit information, there is much need to illuminate the underlying properties of spins in molecular electronic materials. For example, one may wish to identify over what length of time a spin maintains its orientation with respect to an external reference field. In addition, it is crucial to understand how adjacent spins arising, for example, in electrostatically coupled charge-carrier pairs, interact with each other. A periodic perturbation of the field may cause the spins to precess or oscillate, akin to a spinning top experiencing a torque. The quantum mechanical characteristic of the spin is then defined as the coherence time, the time over which an oscillating spin, or spin pair, maintains a fixed phase with respect to the driving field. Electron spins in organic semiconductors provide a remarkable route to performing "hands-on" quantum mechanics since permutation symmetries are controlled directly. Herein, we review some of the recent advances in organic spintronics and organic magnetoresistance, and offer an introductory description of the concept of pulsed, electrically detected magnetic resonance as a technique to manipulate and thus characterize the fundamental properties of electron spins. Spin-dependent dissociation and recombination allow the observation of coherent spin motion in a working device, such as an organic light-emitting diode. Remarkably, it is possible to distinguish between electron and hole spin resonances. The ubiquitous presence of hydrogen nuclei gives rise to strong hyperfine interactions, which appear to provide the basis for many of the magnetoresistive effects observed in these materials. Since hyperfine coupling causes quantum spin beating in electron

  3. Exchange Mechanisms in Long Range Ordered Thin Film Organic Magnetic Semiconductors

    Science.gov (United States)

    Rawat, N.; Headrick, R.; Furis, M.; McGill, S.; Kilanski, L.; Waterman, R.

    2014-03-01

    Magnetic exchange mechanisms in crystalline thin films of Metal Phthalocyanines (M-Pc) are explored using Magnetic Circular Dichroism (MCD) and SQUID measurements up to 10 T and 2K. Long range ordered thin films of organo-soluble derivatives of Co-Pc and Mn-Pc were fabricated using solution processing technique. In the case of Mn-Pc, our measurements show enhanced hybridization of ligand π-electronic states with the Mn d-orbitals. MCD active states beyond 1 μm have been observed for the first time, providing crucial information on the orbital arrangements of MPc's that result in competing (co-existing) long-range superexchange and indirect exchange reminiscent of RKKY. The evolution of Zeeman splitting of specific MCD-active states is very well described by enhanced effective π-electrons g-factors as large as 100, analogous to diluted magnetic semiconductors (DMS) systems. In Co-Pc MCD data indicates a weaker exchange interaction between delocalized charge carriers and d-like spin-polarized electrons, however SQUID measurements reveal magnetic ordering up to 180K. A comparison between Mn-Pc and Co-Pc and earlier results from the spin 1/2 Cu-Pc and their non-magnetic Zn-Pc counterpart, offers an interesting view on the role of long range order in magnetic interactions. NSF, MRI and CAREER programs: DMR- 0722451; DMR-0348354; DMR- 0821268; DMR-1056589.

  4. Hybrid composites of monodisperse pi-conjugated rodlike organic compounds and semiconductor quantum particles

    DEFF Research Database (Denmark)

    Hensel, V.; Godt, A.; Popovitz-Biro, R.

    2002-01-01

    Composite materials of quantum particles (Q-particles) arranged in layers within crystalline powders of pi-conjugated, rodlike dicarboxylic acids are reported. The synthesis of the composites, either as three-dimensional crystals or as thin films at the air-water interface, comprises a two...... analysis of the solids and grazing incidence X-ray diffraction analysis of the films on water. 2) Topotactic solid/gas reaction of these salts with H2S to convert the metal ions into Q-particles of CdS or PbS embedded in the organic matrix that consists of the acids 6(H) and 8(H). These hybrid materials...

  5. Optical and spectroscopic studies on tannery wastes as a possible source of organic semiconductors.

    Science.gov (United States)

    Nashy, El-Shahat H A; Al-Ashkar, Emad; Moez, A Abdel

    2012-02-01

    Tanning industry produces a large quantity of solid wastes which contain hide proteins in the form of protein shavings containing chromium salts. The chromium wastes are the main concern from an environmental stand point of view, because chrome wastes posses a significant disposal problem. The present work is devoted to investigate the possibility of utilizing these wastes as a source of organic semi-conductors as an alternative method instead of the conventional ones. The chemical characterization of these wastes was determined. In addition, the Horizontal Attenuated Total Reflection (HATR) FT-IR spectroscopic analysis and optical parameters were also carried out for chromated samples. The study showed that the chromated samples had suitable absorbance and transmittance in the wavelength range (500-850 nm). Presence of chromium salt in the collagen samples increases the absorbance which improves the optical properties of the studied samples and leads to decrease the optical energy gap. The obtained optical energy gap gives an impression that the environmentally hazardous chrome shavings wastes can be utilized as a possible source of natural organic semiconductors with direct and indirect energy gap. This work opens the door to use some hazardous wastes in the manufacture of electronic devices such as IR-detectors, solar cells and also as solar cell windows. Copyright © 2011 Elsevier B.V. All rights reserved.

  6. Study of π-conjugation effect of organic semiconductors on their optical parameters

    Science.gov (United States)

    Ahmad, Zubair; Zafar, Qayyum; Touati, Farid; Shakoor, R. A.; Al-Thani, N. J.

    2016-04-01

    Metal free organic semiconductor "7,16-bis(3,3-dimethyl-3H-indol-2-yl)-5,14-dihydrodibenzo [b,i][1,4,8,11] tetraazacyclotetradecine" and metal free with extended π-conjugation organic semiconductor "8,19-bis(3,3-dimethyl-3H-indol-2-yl)-6,17-dihydrodinaphthol [2,3-b:2‧,3‧-i][1,4,8,11] tetraazacyclotetradecine have been synthesized and the effect of conjugation on their photovoltaic parameters have been investigated. The photo-physical study reveals band gaps of 2.61 eV for metal free and 2.16 eV for extended material. The HOMO/LUMO levels of the materials are calculated using cyclic voltammetry (CV) study. The open circuit voltages of metal free and extended materials in single layer photovoltaic cells are observed to be 0.72 and 0.73 under simulated solar light illumination (air mass 1.5 G, 100 mW/cm2), respectively. The short circuit current in the extended materials is found to be more than ∼1.5 times higher the metal free material.

  7. Optical and spectroscopic studies on tannery wastes as a possible source of organic semiconductors

    Science.gov (United States)

    Nashy, El-Shahat H. A.; Al-Ashkar, Emad; Abdel Moez, A.

    2012-02-01

    Tanning industry produces a large quantity of solid wastes which contain hide proteins in the form of protein shavings containing chromium salts. The chromium wastes are the main concern from an environmental stand point of view, because chrome wastes posses a significant disposal problem. The present work is devoted to investigate the possibility of utilizing these wastes as a source of organic semi-conductors as an alternative method instead of the conventional ones. The chemical characterization of these wastes was determined. In addition, the Horizontal Attenuated Total Reflection (HATR) FT-IR spectroscopic analysis and optical parameters were also carried out for chromated samples. The study showed that the chromated samples had suitable absorbance and transmittance in the wavelength range (500-850 nm). Presence of chromium salt in the collagen samples increases the absorbance which improves the optical properties of the studied samples and leads to decrease the optical energy gap. The obtained optical energy gap gives an impression that the environmentally hazardous chrome shavings wastes can be utilized as a possible source of natural organic semiconductors with direct and indirect energy gap. This work opens the door to use some hazardous wastes in the manufacture of electronic devices such as IR-detectors, solar cells and also as solar cell windows.

  8. Exotic optoelectronic properties of organic semiconductors with super-controlled nanoscale sizes and molecular shapes.

    Science.gov (United States)

    Hotta, Shu; Yamao, Takeshi; Katagiri, Toshifumi

    2014-03-01

    We present several aspects of thiophene/phenylene co-oligomers (TPCOs). TPCOs are regarded as a newly occurring class of organic semiconductors. These materials are synthesized by hybridizing thiophene and phenylene rings at the molecular level with their various mutual arrangements. These materials are characterized by the super-controlled nanoscale sizes and molecular shapes. These produce peculiar crystallographic structures and high-performance optical and electronic properties. The crystals of TPCOs were obtained through both vapor phase and liquid phase. In the TPCO crystals, the molecules take upright configuration. These cause large carrier mobilities of field-effect transistors and laser oscillations under optical excitations. Spectrally-narrowed emissions (SNEs) were also achieved under weak optical excitation using a mercury lamp. The light-emitting field-effect transistors using these crystals for an active layer have shown the current-injected SNEs when the device was combined with an optical cavity and operated by an alternating-current gate-voltage method. Thus the TPCO materials will play an important role in the future in the fields of nanoscale technology and organic semiconductor materials as well as their optoelectronic device applications.

  9. An All-Organic Composite System for Resistive Change Memory via the Self-Assembly of Plastic-Crystalline Molecules.

    Science.gov (United States)

    Cha, An-Na; Lee, Sang-A; Bae, Sukang; Lee, Sang Hyun; Lee, Dong Su; Wang, Gunuk; Kim, Tae-Wook

    2017-01-25

    An all-organic composite system was introduced as an active component for organic resistive memory applications. The active layer was prepared by mixing a highly polar plastic-crystalline organic molecule (succinonitrile, SN) into an insulating polymer (poly(methyl methacrylate), PMMA). As increasing concentrations of SN from 0 to 3.0 wt % were added to solutions of different concentrations of PMMA, we observed distinguishable microscopic surface structures on blended films of SN and PMMA at certain concentrations after the spin-casting process. The structures were organic dormant volcanos composed of micron-scale PMMA craters and disk type SN lava. Atomic force microscopy (AFM), cross-sectional transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray spectrometer (EDX) analysis showed that these structures were located in the middle of the film. Self-assembly of the plastic-crystalline molecules resulted in the phase separation of the SN:PMMA mixture during solvent evaporation. The organic craters remained at the surface after the spin-casting process, indicative of the formation of an all-organic composite film. Because one organic crater contains one SN disk, our system has a coplanar monolayer disk composite system, indicative of the simplest composite type of organic memory system. Current-voltage (I-V) characteristics of the composite films with organic craters revealed that our all-organic composite system showed unipolar type resistive switching behavior. From logarithmic I-V characteristics, we found that the current flow was governed by space charge limited current (SCLC). From these results, we believe that a plastic-crystalline molecule-polymer composite system is one of the most reliable ways to develop organic composite systems as potential candidates for the active components of organic resistive memory applications.

  10. Mechanical properties of organic semiconductors for mechanically stable and intrinsically stretchable solar cells (Conference Presentation)

    Science.gov (United States)

    Lipomi, Darren J.

    2016-09-01

    This presentation describes my group's efforts to understand the molecular and microstructural basis for the mechanical properties of organic semiconductors for organic photovoltaic (OPV) devices. Our work is motivated by two goals. The first goal is to mitigate mechanical forms of degradation of printed modules during roll-to-roll fabrication, installation, and environmental forces—i.e., wind, rain, snow, and thermal expansion and contraction. Mechanical stability is a prerequisite for inexpensive processing on flexible substrates: to encapsulate devices in glass is to surrender this advantage. The second goal is to enable the next generation of ultra-flexible and stretchable solar cells for collapsible, portable, and wearable applications, and as low-cost sources of energy—"solar tarps"—for disaster relief and for the developing world. It may seem that organic semiconductors, due to their carbon framework, are already sufficiently compliant for these applications. We have found, however, that the mechanical properties (stiffness and brittleness) occupy a wide range of values, and can be difficult to predict from molecular structure alone. We are developing an experimental and theoretical framework for how one can combine favorable charge-transport properties and mechanical compliance in organic semiconductor films. In particular, we have explored the roles of the backbone, alkyl side chain, microstructural order, the glass transition, molecular packing with fullerenes, plasticizing effects of additives, extent of separation of [60]PCBM and [70]PCBM, structural randomness in low-bandgap polymers, and reinforcement by encapsulation, on the mechanical compliance. We are exploring the applicability of semi-empirical "back-of-the-envelope" models, along with multi-scale molecular dynamics simulations, with the ultimate goal of designing electroactive organic materials whose mechanical properties can be dialed-in. We have used the insights we have developed to

  11. Material degradation of liquid organic semiconductors analyzed by nuclear magnetic resonance spectroscopy

    Directory of Open Access Journals (Sweden)

    Tatsuya Fukushima

    2015-08-01

    Full Text Available Liquid organic light-emitting diodes (liquid OLEDs are unique devices consisting only of liquid organic semiconductors in the active layer, and the device performances have been investigated recently. However, the device degradation, especially, the origin has been unknown. In this study, we show that material degradation occurs in liquid OLEDs, whose active layer is composed of carbazole with an ethylene glycol chain. Nuclear magnetic resonance (NMR experiments clearly exhibit that the dimerization reaction of carbazole moiety occurs in the liquid OLEDs during driving the devices. In contrast, cleavages of the ethylene glycol chain are not detected within experimental error. The dimerization reaction is considered to be related to the device degradation.

  12. Optical devices combining an organic semiconductor crystal with a two-dimensional inorganic diffraction grating

    Energy Technology Data Exchange (ETDEWEB)

    Kitazawa, Takenori; Yamao, Takeshi, E-mail: yamao@kit.ac.jp; Hotta, Shu [Faculty of Materials Science and Engineering, Kyoto Institute of Technology, Kyoto 606-8585 (Japan)

    2016-02-01

    We have fabricated optical devices using an organic semiconductor crystal as an emission layer in combination with a two-dimensional (2D) inorganic diffraction grating used as an optical cavity. We formed the inorganic diffraction grating by wet etching of aluminum-doped zinc oxide (AZO) under a 2D cyclic olefin copolymer (COC) diffraction grating used as a mask. The COC diffraction grating was fabricated by nanoimprint lithography. The AZO diffraction grating was composed of convex prominences arranged in a triangular lattice. The organic crystal placed on the AZO diffraction grating indicated narrowed peaks in its emission spectrum under ultraviolet light excitation. These are detected parallel to the crystal plane. The peaks were shifted by rotating the optical devices around the normal to the crystal plane, which reflected the rotational symmetries of the triangular lattice through 60°.

  13. Smooth growth of organic semiconductor films on graphene for high efficiency electronics

    Energy Technology Data Exchange (ETDEWEB)

    Hlawacek, Gregor [Physics of Interfaces and Nanomaterials, MESA, Institute for Nanotechnology, University of Twente, Enschede (Netherlands); Institute for Physics, University of Leoben (Austria); Khokhar, Fawad S.; Gastel, Raoul van; Poelsema, Bene [Physics of Interfaces and Nanomaterials, MESA, Institute for Nanotechnology, University of Twente, Enschede (Netherlands); Teichert, Christian [Institute for Physics, University of Leoben (Austria)

    2011-07-01

    High quality thin films of conjugated molecules with smooth interfaces are important to assist the advent of organic electronics. Here, we report on the layer-by-layer growth of the organic semiconductor molecule para-sexiphenyl on the transparent electrode material graphene. State of the art Low Energy Electron Microscopy, micro Low Energy Electron Diffraction and spot profile analysis techniques revealed the morphological and structural evolution of the thin film. Subtle difference in the molecular arrangement in comparison to graphite are confirmed by molecular dynamics simulations. Initial islands are found to have a meta stable structure that is characterized by flat lying molecules. With increasing coverage this structure changes into a herringbone arrangement similar to the {l_brace}111{r_brace} bulk layer. The layer-by-layer growth of 6P on graphene proceeds by subsequent adding of {l_brace}111{r_brace} layers.

  14. Bio-recognitive photonics of a DNA-guided organic semiconductor.

    Science.gov (United States)

    Back, Seung Hyuk; Park, Jin Hyuk; Cui, Chunzhi; Ahn, Dong June

    2016-01-01

    Incorporation of duplex DNA with higher molecular weights has attracted attention for a new opportunity towards a better organic light-emitting diode (OLED) capability. However, biological recognition by OLED materials is yet to be addressed. In this study, specific oligomeric DNA-DNA recognition is successfully achieved by tri (8-hydroxyquinoline) aluminium (Alq3), an organic semiconductor. Alq3 rods crystallized with guidance from single-strand DNA molecules show, strikingly, a unique distribution of the DNA molecules with a shape of an 'inverted' hourglass. The crystal's luminescent intensity is enhanced by 1.6-fold upon recognition of the perfect-matched target DNA sequence, but not in the case of a single-base mismatched one. The DNA-DNA recognition forming double-helix structure is identified to occur only in the rod's outer periphery. This study opens up new opportunities of Alq3, one of the most widely used OLED materials, enabling biological recognition.

  15. Collection-limited theory interprets the extraordinary response of single semiconductor organic solar cells.

    Science.gov (United States)

    Ray, Biswajit; Baradwaj, Aditya G; Khan, Mohammad Ryyan; Boudouris, Bryan W; Alam, Muhammad Ashraful

    2015-09-08

    The bulk heterojunction (BHJ) organic photovoltaic (OPV) architecture has dominated the literature due to its ability to be implemented in devices with relatively high efficiency values. However, a simpler device architecture based on a single organic semiconductor (SS-OPV) offers several advantages: it obviates the need to control the highly system-dependent nanoscale BHJ morphology, and therefore, would allow the use of broader range of organic semiconductors. Unfortunately, the photocurrent in standard SS-OPV devices is typically very low, which generally is attributed to inefficient charge separation of the photogenerated excitons. Here we show that the short-circuit current density from SS-OPV devices can be enhanced significantly (∼100-fold) through the use of inverted device configurations, relative to a standard OPV device architecture. This result suggests that charge generation may not be the performance bottleneck in OPV device operation. Instead, poor charge collection, caused by defect-induced electric field screening, is most likely the primary performance bottleneck in regular-geometry SS-OPV cells. We justify this hypothesis by: (i) detailed numerical simulations, (ii) electrical characterization experiments of functional SS-OPV devices using multiple polymers as active layer materials, and (iii) impedance spectroscopy measurements. Furthermore, we show that the collection-limited photocurrent theory consistently interprets typical characteristics of regular SS-OPV devices. These insights should encourage the design and OPV implementation of high-purity, high-mobility polymers, and other soft materials that have shown promise in organic field-effect transistor applications, but have not performed well in BHJ OPV devices, wherein they adopt less-than-ideal nanostructures when blended with electron-accepting materials.

  16. Charge transfer rates in organic semiconductors beyond first-order perturbation: from weak to strong coupling regimes.

    Science.gov (United States)

    Nan, Guangjun; Wang, Linjun; Yang, Xiaodi; Shuai, Zhigang; Zhao, Yi

    2009-01-14

    Semiclassical Marcus electron transfer theory is often employed to investigate the charge transport properties of organic semiconductors. However, quite often the electronic couplings vary several orders of magnitude in organic crystals, which goes beyond the application scope of semiclassical Marcus theory with the first-order perturbative nature. In this work, we employ a generalized nonadiabatic transition state theory (GNTST) [Zhao et al., J. Phys. Chem. A 110, 8204 (2004)], which can evaluate the charge transfer rates from weak to strong couplings, to study charge transport properties in prototypical organic semiconductors: quaterthiophene and sexithiophene single crystals. By comparing with GNTST results, we find that the semiclassical Marcus theory is valid for the case of the coupling semiconductors with general electronic coupling terms. Taking oligothiophenes as examples, we find that our GNTST-calculated hole mobility is about three times as large as that from the semiclassical Marcus theory. The difference arises from the quantum nuclear tunneling and the nonperturbative effects.

  17. Spectral photosensitivity of an organic semiconductor in a submicron metal grating

    Science.gov (United States)

    Blinov, L. M.; Lazarev, V. V.; Yudin, S. G.; Palto, S. P.

    2016-02-01

    The photoelectric effect in films of the copper phthalocyanine organic semiconductor (α-CuPc) has been experimentally studied for two fundamentally different geometries. A sample in the first, normal geometry is fabricated in the form of a sandwich with an α-CuPc film between a transparent SnO2 electrode on a substrate and an upper reflecting Al electrode. In the second case of the planar geometry, the semiconductor is deposited on the substrate with a system of submicron chromium interdigital electrodes. It has been found that the effective photoconductivity in the planar geometry is more than two orders of magnitude higher than that in the normal geometry. In addition to the classical model (without excitons), a simple exciton model has been proposed within which a relation has been obtained between the probability of the formation of electron-hole pairs and the characteristic recombination and dissociation times of excitons. An increase in the photoconductivity in the planar geometry has been explained within the exciton model by an increase in the rate of dissociation of excitons into electron-hole pairs owing to acceptor oxygen molecules, which diffuse more efficiently into the film in the case of the planar geometry where the upper electrode is absent.

  18. N-channel field-effect transistors with an organic-inorganic layered perovskite semiconductor

    Science.gov (United States)

    Matsushima, Toshinori; Mathevet, Fabrice; Heinrich, Benoît; Terakawa, Shinobu; Fujihara, Takashi; Qin, Chuanjiang; Sandanayaka, Atula S. D.; Ribierre, Jean-Charles; Adachi, Chihaya

    2016-12-01

    Large electron injection barriers and electrode degradation are serious issues that need to be overcome to obtain n-channel operation in field-effect transistors with an organic-inorganic layered perovskite (C6H5C2H4NH3)2SnI4 semiconductor. By employing low-work-function Al source/drain electrodes and by inserting C60 layers between the perovskite semiconductor and the Al electrodes to reduce the injection barrier and to suppress the electrode degradation, we demonstrate n-channel perovskite transistors with electron mobilities of up to 2.1 cm2/V s, the highest value ever reported in spin-coated perovskite transistors. The n-channel transport properties of these transistors are relatively stable in vacuum but are very sensitive to oxygen, which works as electron traps in perovskite and C60 layers. In addition, grazing-incidence X-ray scattering and thermally stimulated current measurements revealed that crystallite size and electron traps largely affect the n-channel transport properties.

  19. Controlling of the optical properties of the solutions of the PTCDI-C8 organic semiconductor

    Science.gov (United States)

    Erdoğan, Erman; Gündüz, Bayram

    2016-09-01

    N,N'-Dioctyl-3,4,9,10 perylenedicarboximide (PTCDI-C8) organic semiconductor have vast applications in solar cells, thermoelectric generators, thin film photovoltaics and many other optoelectronic devices. These applications of the materials are based on their spectral and optical properties. The solutions of the PTCDI-C8 for different molarities were prepared and the spectral and optical mesaurements were analyzed. Effects of the molarities on optical properties were investigated. Vibronic structure has been observed based on the absorption bands of PTCDI-C8 semiconductor with seven peaks at 2.292, 2.451, 2.616, 3.212, 3.851, 4.477 and 4.733 eV. The important spectral parameteres such as molar/mass extinction coefficients, absorption coefficient of the PTCDI-C8 molecule were calculated. Optical properties such as angle of incidence/refraction, optical band gap, real and imaginary parts of dielectric constant, loss factor and electrical susceptibility of the the PTCDI-C8 were obtained. Finally, we discussed these parameters for optoelectronic applications and compared with related parameters in literature.

  20. IR spectroscopic investigation of charge transfer at interfaces of organic semiconductors (Conference Presentation)

    Science.gov (United States)

    Beck, Sebastian; Hillebrandt, Sabina; Pucci, Annemarie

    2016-09-01

    In organic electronics, the interactions at interfaces between different organic and inorganic layers play a decisive role for device functionality and performance. Therefore, more detailed, quantitative studies of charge transfer (CT) at such interfaces are needed to improve the understanding of the underlying mechanisms. In this study we show that in-situ infrared spectroscopy can be used to investigate CT effects at organic/organic as well as inorganic/organic interfaces quantitatively. For different combinations of commonly used organic semiconductors such as 4,4´-bis(N-carbazolyl)-1,1´-biphenyl (CBP) or fluorinated zinc phthalocyanine (F4ZnPc) and inorganic contact materials such as molybdenum oxide (MoO3) or indium tin oxide (ITO) the CT at the interface was investigated using in-situ IR spectroscopy. The measurements were carried out under UHV conditions during film growth what enables a careful study of the influence of different parameters such as substrate temperature and layer thickness in a controlled way even on a nanometer scale. When the organic molecules are deposited onto the underlying layer charged and non-charged species form which can be identified and quantitatively analyzed in the IR spectra. It was also found that the deposition sequence can strongly influence the interface properties what might have strong implications on the layer stack design. For example, when MoO3 is deposited onto CBP, the CBP layer is strongly doped, due to diffusion of the deposited transition metal oxide clusters into the organic layer. Financial support by BMBF (project INTERPHASE) is gratefully acknowledged.

  1. Photoluminescence polarization anisotropy for studying long-range structural ordering within semiconductor multi-atomic alloys and organic crystals

    Energy Technology Data Exchange (ETDEWEB)

    Prutskij, T.; Percino, J. [Instituto de Ciencias, BUAP, Privada 17 Norte, No 3417, col. San Miguel Huyeotlipan, 72050, Puebla, Pue. (Mexico); Orlova, T. [Department of Chemical and Biochemical Engineering, University of Notre Dame, Notre Dame, IN (United States); Vavilova, L. [Ioffe Physical-Technical Institute, 26 Polytekhnicheskaya, St Petersburg 194021, Russian Federation (Russian Federation)

    2013-12-04

    Long-range structural ordering within multi-component semiconductor alloys and organic crystals leads to significant optical anisotropy and, in particular, to anisotropy of the photoluminescence (PL) emission. The PL emission of ternary and quaternary semiconductor alloys is polarized if there is some amount of the atomic ordering within the crystal structure. We analyze the polarization of the PL emission from the quaternary GaInAsP semiconductor alloy grown by Liquid Phase Epitaxy (LPE) and conclude that it could be caused by low degree atomic ordering within the crystal structure together with the thermal biaxial strain due to difference between the thermal expansion coefficients of the layer and the substrate. We also study the state of polarization of the PL from organic crystals in order to identify different features of the crystal PL spectrum.

  2. Direct observation of entangled multiexciton states in organic semiconductors (Conference Presentation)

    Science.gov (United States)

    Yong, Chaw Keong; Musser, Andrew J.; Clark, Jenny; Anthony, John E.; Beljonne, David; Friend, Richard H.; Sirringhaus, Henning

    2016-09-01

    The standard view of singlet exciton fission in organic semiconductor is that one photon creates a singlet exciton which subsequently decays into a correlated triplet pair state (TT) multiexciton states. The triplet pair state then splits to form two free triplets. Although the theoretical description of (TT) is well developed since 1970, it has so far proved difficult to determine the role and nature of the (TT) state in solid films from experiment directly. Here, using a combination of highly sensitive broadband transient absorption and photoluminescence spectroscopies on a range of polyacene films, we demonstrate that the (TT) multiexciton states is bound and energetically stabilised with respect to free triplets in even the most efficient singlet fission materials, such as TIPS-pentacene and pentacene. The (TT) multiexciton state is emissive, and we find that charge-transfer from one (TT) state to the neighboring electron acceptors has a yield of >100%, i.e. more than one charge is transferred per charge-transfer event. Our findings suggest that the formation of spin-correlated (TT) states emits as one particle and generates 2 charges in organic solar cells and thus open a range of fascinating questions regarding the potential to use entanglement to enhance organic photovoltaic efficiency and the application of organic materials in quantum information

  3. Electrical characterization of the organic semiconductor Ag/CuPc/Au Schottky diode

    Institute of Scientific and Technical Information of China (English)

    Mutabar Shah; M. H. Sayyad; Kh. S. Karimov

    2011-01-01

    This paper reports on the fabrication and investigation of a surface-type organic semiconductor copper phthalocyanine (CuPc) based diode. A thin film of CuPc of thickness 100 nm was thermally sublimed onto a glass substrate with preliminary deposited metallic electrodes to form a surface-type Ag/CuPc/Au Schottky diode. The current-voltage characteristics were measured at room temperature under dark conditions. The barrier height was calculated as 1.05 eV. The values of mobility and conductivity was found to be 1.74 x l0-9 cm2/(V.s) and 5.5 x 10-6 Ω-1. cm-1, respectively. At low voltages the device showed ohmic conduction and the space charge limited current conduction mechanisms were dominated at higher voltages.

  4. Simulation of Temperature-Dependent Charge Transport in Organic Semiconductors with Various Degrees of Disorder.

    Science.gov (United States)

    Heck, Alexander; Kranz, Julian J; Elstner, Marcus

    2016-07-12

    Different trends in the temperature dependence of the mobility can be observed in organic semiconductors, which constitutes a serious challenge for theoretical approaches. In this work, we apply an atomistic bottom-up simulation for the calculation of temperature-dependent mobilities of a broad selection of materials, ranging from single crystal to amorphous solid. We evaluate how well the method is able to distinguish temperature dependences of different materials and how the findings relate to experimental observations. The applied method is able to cover the full range of temperature dependencies from activated transport in amorphous materials to band-like transport in crystals. In well-characterized materials, we find good agreement with the experiment and a band-like temperature dependence. In less-ordered materials, we find discrepancies from the experiment that indicated that experimentally studied materials possess a higher degree of disorder than do the simulated defect-free morphologies.

  5. Organic semiconductor growth on graphene studied by LEEM and {mu}LEED

    Energy Technology Data Exchange (ETDEWEB)

    Hlawacek, Gregor [Institute of Physics, University of Leoben (Austria); MESA Institute for Nanotechnology, University of Twente, Enschede (Netherlands); Khokhar, Fawad S.; Gastel, Raoul van; Poelsema, Bene [MESA Institute for Nanotechnology, University of Twente, Enschede (Netherlands); Teichert, Christian [Institute of Physics, University of Leoben (Austria)

    2010-07-01

    The organic semiconductor para-sexiphenyl (6P) was deposited at various substrate temperatures onto graphene flakes grown on Iridium(111). The dynamics of the deposition process and the crystallographic structure were observed in-situ by means of Low Energy Electron Microscopy (LEEM) and micro Low Energy Electron Diffraction ({mu}LEED). Layer-by-layer growth of lying molecules on graphene is observed for low deposition temperatures. After formation of a low-density layer, the full first monolayer already shows a bulk like structure. An exceptionally high mobility for 6P on graphene is observed in the initial low density layer. For room temperature the growth mode changes to Stranski-Krastanov for 6P on graphene. At elevated temperatures a continuous layer of upright standing molecules on the Ir(111) surface is nucleated by the presence of the graphene flakes.

  6. Electrical Interfaces for Organic Nanodevices

    DEFF Research Database (Denmark)

    Henrichsen, Henrik Hartmann

    Optoelectronic applications of organic semiconductor materials is a research field, which recently came to the large scale consumer market in display technologies. Organic semiconductors are mainly applied in amorphous form offering fabrication control on a large scale. Crystalline organic...... semiconductors, where the molecular packing is more crucial, have not yet had a major impact in commercial products. This thesis describes development of new ways to electrically contact organic semiconductors. In particular, crystalline organic para-hexaphenylene (p6P) nanofibers have been used......, by using an AC-gated organic field-effect transistor (OFET) implementation. The electrical properties of arrays of p6P nanofibers were investigated asgrown and modeled theoretically. The developed model, assuming hopping-like transport of charge carriers, was used to estimate the distance between hopping...

  7. The surface quasiliquid melt acceleration and the role of thermodynamic phase in the thermal decomposition of crystalline organic explosives

    Energy Technology Data Exchange (ETDEWEB)

    Henson, Bryan F [Los Alamos National Laboratory

    2010-01-01

    We show that melt acceleration in the thermal decomposition of crystalline organic solids is a manifestation of the surface quasiliquid phase. We derive a single universal rate law for melt acceleration that is a simple function of the metastable liquid activity below the melting point, and has a zero order term proportional to the quasiliquid thickness. We argue that the underlying mechanisms of this model will provide a molecular definition for the stability of the class of secondary explosives.

  8. Exploring the energy landscape of the charge transport levels in organic semiconductors at the molecular scale.

    Science.gov (United States)

    Cornil, J; Verlaak, S; Martinelli, N; Mityashin, A; Olivier, Y; Van Regemorter, T; D'Avino, G; Muccioli, L; Zannoni, C; Castet, F; Beljonne, D; Heremans, P

    2013-02-19

    The extraordinary semiconducting properties of conjugated organic materials continue to attract attention across disciplines including materials science, engineering, chemistry, and physics, particularly with application to organic electronics. Such materials are used as active components in light-emitting diodes, field-effect transistors, or photovoltaic cells, as a substitute for (mostly Si-based) inorganic semiconducting materials. Many strategies developed for inorganic semiconductor device building (doping, p-n junctions, etc.) have been attempted, often successfully, with organics, even though the key electronic and photophysical properties of organic thin films are fundamentally different from those of their bulk inorganic counterparts. In particular, organic materials consist of individual units (molecules or conjugated segments) that are coupled by weak intermolecular forces. The flexibility of organic synthesis has allowed the development of more efficient opto-electronic devices including impressive improvements in quantum yields for charge generation in organic solar cells and in light emission in electroluminescent displays. Nonetheless, a number of fundamental questions regarding the working principles of these devices remain that preclude their full optimization. For example, the role of intermolecular interactions in driving the geometric and electronic structures of solid-state conjugated materials, though ubiquitous in organic electronic devices, has long been overlooked, especially when it comes to these interfaces with other (in)organic materials or metals. Because they are soft and in most cases disordered, conjugated organic materials support localized electrons or holes associated with local geometric distortions, also known as polarons, as primary charge carriers. The spatial localization of excess charges in organics together with low dielectric constant (ε) entails very large electrostatic effects. It is therefore not obvious how these

  9. Fused thiophene and its periphery fluorinated substitution derivatives: a theoretical study for organic semiconductors

    Science.gov (United States)

    Wei, Hui-Ling; Shi, Ya-Rui; Liu, Yu-Fang

    2015-06-01

    A series of phenyl end-capped derivatives of benzo[d,d‧]thieno[3,2-b4,5- b‧]dithiophene (BTDT) with periphery-fluorinated substitutions (PFS) were systematically investigated by using density functional theory (DFT) combined with the Marcus-Hush electron transfer theory. The substituting effects of PFS were discussed. Compared with the original compounds, (i) the PFS compounds have a relatively higher efficiency of charge transport, lower barriers of electron injection, and larger HOMO-LUMO gaps; (ii) the air-stability and the device performance are enhanced by PFS; and (iii) the HOMO-LUMO transitions in the absorption spectrum of the PFS compounds show an obvious blue-shift trend. The perfluorophenylbisbenzo[d, d‧]thieno[3,2-b4,5-b‧]dithiophene (BpF-BTDT) is found to be the most stable and most effective compound in charge transport among the investigated compounds, and it is suggested as an ambipolar semiconducting material. The results of electronic coupling of the bisbenzo[d, d‧]thieno[3,2-b 4,5- b‧]dithiophene (BBTDT) derivatives show that the orbital interaction is mainly contributed by the neighboring molecule in the two dimensional (2D) layer. The PFS compounds have lower oxidization potential, ionization potential, and electron affinity values than the corresponding original ones, which suggest that fluorination can enhance the performance of the thiophene-based organic solar cells. These findings provide a better understanding of the PFS effects on organic semiconductors and may help to design high-performance semiconductor materials.

  10. Contribution to the study of electronic structure of crystalline semiconductors (Si, Ge, GaAs, Gap, ZnTe, ZnSe

    Directory of Open Access Journals (Sweden)

    Bouhafs B.

    2012-06-01

    Full Text Available The band structure of semiconductors was described by several theorists since the Fifties. The main objective of the present paper is to do a comparative study between various families of semi-conductors IV (Si,Ge, III-V (GaAs, GaP and II-VI (ZnSe, ZnTe with both methods; tight Binding1 method and pseudo potential method2. This work enables us to understand as well as the mechanism of conduction process in these semiconductors and powers and limits of the above methods. The obtained results allow to conclude that both methods are in a good agreement to describe the morphology of band structures of the cited semiconductors. This encourages us to study in the future the electronic behaviour through the structure of bands for more complex systems such as the heterostructures.

  11. Si-C Linked Organic Monolayers on Crystalline Silicon Surfaces as Alternative Gate Insulators

    NARCIS (Netherlands)

    Faber, Erik J.; Smet, de Louis C.P.M.; Olthuis, Wouter; Zuilhof, Han; Sudhölter, Ernst J.R.; Bergveld, Piet; Berg, van den Albert

    2005-01-01

    Herein, the influence of silicon surface modification via Si-CnH2n+1 (n=10,12,16,22) monolayer-based devices on p-type (100) and n-type (100) silicon is studied by forming MIS (metal–insulator–semiconductor) diodes using a mercury probe. From current density–voltage (J–V) and capacitance–voltage (C–

  12. Maximum probing depth of low-energy photoelectrons in an amorphous organic semiconductor film

    Energy Technology Data Exchange (ETDEWEB)

    Ozawa, Yusuke [Graduate School of Advanced Integration Science, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan); Nakayama, Yasuo, E-mail: nkym@restaff.chiba-u.jp [Graduate School of Advanced Integration Science, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan); Machida, Shin’ichi; Kinjo, Hiroumi [Graduate School of Advanced Integration Science, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan); Ishii, Hisao [Graduate School of Advanced Integration Science, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan); Center for Frontier Science, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan)

    2014-12-15

    Highlights: • Photoelectron attenuation lengths (AL) through amorphous organic films were examined. • In the energy range below 9 eV, AL fluctuates unlike a prediction by universal curve. • AL of photoelectron yield spectroscopy (PYS) measurements was found to be ∼3.6 nm. • PYS signals still survived through an 18 nm-thick film despite such a moderate AL. • This indicates buried interfaces in practical organic devices can be accessed by PYS. - Abstract: The attenuation length (AL) of low energy photoelectrons inside a thin film of a π-conjugated organic semiconductor material, 2,2′,2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole), was investigated using ultraviolet photoelectron spectroscopy (UPS) and photoelectron yield spectroscopy (PYS) to discuss their probing depth in amorphous organic thin films. The present UPS results indicated that the AL is 2–3 nm in the electron energy range of 6.3–8.3 eV with respect to the Fermi level, while the PYS measurements which collected the excited electrons in a range of 4.5–6 eV exhibited a longer AL of 3.6 nm. Despite this still short AL in comparison to a typical thickness range of electronic devices that are a few tens of nm-thick, the photoemission signal penetrating through further thicker (18 nm) organic film was successfully detected by PYS. This fact suggests that the electronic structures of “buried interfaces” inside practical organic devices are accessible using this rather simple measurement technique.

  13. Implementing Metal-to-Ligand Charge Transfer in Organic Semiconductor for Improved Visible-Near-Infrared Photocatalysis.

    Science.gov (United States)

    Li, Yanrui; Wang, Zhaowu; Xia, Tong; Ju, Huanxin; Zhang, Ke; Long, Ran; Xu, Qian; Wang, Chengming; Song, Li; Zhu, Junfa; Jiang, Jun; Xiong, Yujie

    2016-08-01

    The coordination of organic semiconductors with metal cations can induce metal-to-ligand charge transfer, which broadens light absorption to cover the visible-near-infrared (vis-NIR) spectrum. As a proof-of-concept demonstration, the g-C3 N4 -based complex exhibits dramatically enhanced photocatalytic H2 production with excellent durability under vis-NIR irradiation.

  14. Inkjet-Printed Organic Field-Effect Transistor by Using Composite Semiconductor Material of Carbon Nanoparticles and Poly(3-Hexylthiophene

    Directory of Open Access Journals (Sweden)

    Chih-Ting Lin

    2011-01-01

    Full Text Available Poly(3-hexylthiophene, P3HT, has been widely used in organic electronics as a semiconductor material. It suffers from the low carrier mobility characteristics. This limits P3HT to be employed in applications. Therefore, the blending semiconductor material, carbon nanoparticle (CNP, and P3HT, are developed and examined by inkjet-printing organic field-effect transistor technology in this work. The effective carrier mobility of fabricated OFETs can be enhanced by 8 folds with adding CNP and using O2 plasma treatment. At the same time, the transconductance of fabricated OFETs is also raised by 5 folds. Based on the observations of SEM, XRD, and FTIR, these improvements are contributed to the local field induced by the formation of CNP/P3HT complexes. This observation presents an insight of the development in organic semiconductor materials. Moreover, this work also offers a low-cost and effective semiconductor material for inkjet-printing technology in the development of organic electronics.

  15. Determination of localized trap parameters in organic semiconductors using charge based deep level transient spectroscopy (Q-DLTS)

    Science.gov (United States)

    Nguyen, T. P.; Ip, J.; Gaudin, O.; Jackman, R. B.

    2004-07-01

    In organic light emitting diodes (OLEDs), localized traps within the band gap of the organic semiconductor play a fundamental role in the light emission process. Trapped charge carriers cannot recombine efficiently and therefore do not contribute to the emission. The determination of the trap parameters in the emitting layer is especially important in the evaluation of the efficiency of such devices. We have investigated the trap parameters in some organic semiconductors using the Charge-Based Deep Level Transient Spectroscopy (Q-DLTS) technique. Examples are given in poly(p phenylene vinylene) or PPV and 4, 4'-bis(4-dimethylaminostryryl) or DMASB, for which the trap level, the trap density, and the capture cross section were determined. In addition, it was possible to identify the carrier type (minority and majority) traps in these semiconductors. The results were compared with those obtained in similar materials by other techniques such as conventional DLTS, thermally stimulated currents (TSC), impedance measurements. Q-DLTS appears to be a powerful tool for studying defects in organic semiconductors.

  16. Optically switchable transistor via energy-level phototuning in a bicomponent organic semiconductor

    Science.gov (United States)

    Orgiu, Emanuele; Crivillers, Núria; Herder, Martin; Grubert, Lutz; Pätzel, Michael; Frisch, Johannes; Pavlica, Egon; Duong, Duc T.; Bratina, Gvido; Salleo, Alberto; Koch, Norbert; Hecht, Stefan; Samorì, Paolo

    2012-08-01

    Organic semiconductors are suitable candidates for printable, flexible and large-area electronics. Alongside attaining an improved device performance, to confer a multifunctional nature to the employed materials is key for organic-based logic applications. Here we report on the engineering of an electronic structure in a semiconducting film by blending two molecular components, a photochromic diarylethene derivative and a poly(3-hexylthiophene) (P3HT) matrix, to attain phototunable and bistable energy levels for the P3HT's hole transport. As a proof-of-concept we exploited this blend as a semiconducting material in organic thin-film transistors. The device illumination at defined wavelengths enabled reversible tuning of the diarylethene's electronic states in the blend, which resulted in modulation of the output current. The device photoresponse was found to be in the microsecond range, and thus on a technologically relevant timescale. This modular blending approach allows for the convenient incorporation of various molecular components, which opens up perspectives on multifunctional devices and logic circuits.

  17. Theoretical study of anisotropic mobility in ladder-type molecule organic semiconductors

    Science.gov (United States)

    Wei, Hui-Ling; Liu, Yu-Fang

    2014-09-01

    The properties of two ladder-type semiconductors {M1: 2,2'-(2,7-dihexy1-4,9-dihydro- s-indaceno[1,2- b:5,6- b']dithiophene-4,9-diylidene) dimalononitrile and M2: 2,7-dihexy1-4,9-dihydro- s-indaceno[1,2- b:5,6- b']dithiophene-4,9-dione} as the n-type and ambipolar organic materials are systematically investigated using the first-principle density functional theory combined with the Marcus-Hush electron transfer theory. It is found that the substitution of M1 induces large changes in its electron-transfer mobility of 1.370 cm2 V-1 s-1. M2 has both large electron- and hole-transfer mobility of 0.420 and 0.288 cm2 V-1 s-1, respectively, which indicates that M2 is potentially a high efficient ambipolar organic semiconducting material. Both the M1 and M2 crystals show remarkable anisotropic behavior. A proper design of the n-type and ambipolar organic electronic materials, which may have high mobility performance, is suggested based on the investigated two molecules.

  18. Electrochemical characterization of sub-micro-gram amounts of organic semiconductors using scanning droplet cell microscopy

    Science.gov (United States)

    Gasiorowski, Jacek; Mardare, Andrei I.; Sariciftci, Niyazi S.; Hassel, Achim Walter

    2013-01-01

    Scanning droplet cell microscopy (SDCM) uses a very small electrolyte droplet at the tip of a capillary which comes in contact with the working electrode. This method is particularly interesting for studies on organic semiconductors since it provides localized electrochemical investigations with high reproducibility. One clear advantage of applying SDCM is represented by the very small amounts of material necessary (less than 1 mg). Organic materials can be investigated quickly and inexpensively in electrochemical studies with a high throughput. In the present study, thin layers of poly(3-hexylthiophene) (P3HT), which is one of the most often used material for organic solar cells, were deposited on ITO/glass as working electrodes in SDCM studies. The redox reactions in 0.1 M tetra(n-butyl)ammonium hexafluorophosphate (TBAPF6) dissolved in propylene carbonate were studied by cyclic voltammetry and by electrochemical impedance spectroscopy. Two reversible, distinct oxidation steps of the P3HT were detected and their kinetics were studied in detail. The doping of P3HT increased due to the electrochemical oxidation and had resulted in a decrease of the film resistance by a few orders of magnitude. Due to localization on the sample various parameter combinations can be studied quantitatively and reproducibly. PMID:24926226

  19. Characterization of the Hole Transport and Electrical Properties in the Small-Molecule Organic Semiconductors

    Science.gov (United States)

    Wang, L. G.; Zhu, J. J.; Liu, X. L.; Cheng, L. F.

    2017-10-01

    In this paper, we investigate the hole transport and electrical properties in a small-molecule organic material N, N'-bis(1-naphthyl)- N, N'-diphenyl-1,1'-biphenyl-4,4'-diamine (NPB), which is frequently used in organic light-emitting diodes. It is shown that the thickness-dependent current density versus voltage ( J- V) characteristics of sandwich-type NPB-based hole-only devices cannot be described well using the conventional mobility model without carrier density or electric field dependence. However, a consistent and excellent description of the thickness-dependent and temperature-dependent J- V characteristics of NPB hole-only devices can be obtained with a single set of parameters by using our recently introduced improved model that take into account the temperature, carrier density, and electric field dependence of the mobility. For the small-molecule organic semiconductor studied, we find that the width of the Gaussian distribution of density of states σ and the lattice constant a are similar to the values reported for conjugated polymers. Furthermore, we show that the boundary carrier density has an important effect on the J- V characteristics. Both the maximum of carrier density and the minimum of electric field appear near the interface of NPB hole-only devices.

  20. Theory aided design and analysis of dielectric and semiconductor components for organic field-effect transistors

    Science.gov (United States)

    Dibenedetto, Sara Arlene

    Perfluoroacyl/acyl-derivatized quaterthiophens are developed and synthesized. The frontier molecular orbital energies of these compounds are studied by optical spectroscopy and electrochemistry while solid-state/film properties are investigated by thermal analysis, x-ray diffraction, and scanning electron microscopy. Organic thin film transistors (OTFTs) performance parameters are discussed in terms of the interplay between semiconductor molecular energetics and film morphologies/microstructures. The majority charge carrier type and mobility exhibit a strong correlation with the regiochemistry of perfluoroarene incorporation. In quaterthiophene-based semiconductors, carbonyl-functionalization allows tuning of the majority carrier type from p-type to ambipolar and to n-type. In situ conversion of a p-type semiconducting film to n-type film is also demonstrated. The design of chemical and film microstructural alternative hybrid organic-inorganic gate dielectrics is described using the classic Clausius-Mossotti relation. The Maxwell-Wagner effective medium model is used to compute the effective dielectric permittivity of two types of dielectrics self-assembled nanodielectrics (SANDs) and crosslinked polymer blends (CPBs). In these calculations showing good agreement between theory and experiment, it is found that greater capacitances should be achievable with mixed composites than with layered composites. With this insight, a series of mixed metal oxide-polyolefin nanocomposites is synthesized via in-situ olefin polymerization using the single-site metallocene catalysts. By integrating organic and inorganic constituents, the resulting hybrid material exhibit high permittivity (from the inorganic inclusions) and high breakdown strength, mechanical flexibility, and facile processability (from the polymer matrices). In order to better optimize the capacitance and leakage current of hybrid organic-inorganic dielectrics, the capacitance, leakage current and OFET gate

  1. Unique Room Temperature Light Emitting Diode Based on 2D Hybrid Organic-Inorganic Low Dimensional Perovskite Semiconductor

    CERN Document Server

    Vassilakopoulou, Anastasia; Koutselas, Ioannis

    2016-01-01

    Room temperature single layer light emitting diode(LED), based on a two dimensional hybrid organic-inorganic semiconductor(HOIS), is demonstrated. This simple, low cost excitonic LED operates at low voltages. Such an excitonic device is presented for the first time as functioning at room temperature. The newly introduced class of perovskite LEDs, until now based on 3D perovksite HOIS, is now broadened with the implementation of the 2D HOIS. Novel functionalities can be realized since it is now possible to access the hybrid's 2D semiconductor advantageous properties, such as the increased excitonic peak wavelength tunability, excitonic binding energy and oscillator strength.

  2. Doping highly ordered organic semiconductors: experimental results and fits to a self-consistent model of excitonic processes, doping, and transport.

    Science.gov (United States)

    Chen, Si-Guang; Stradins, Paul; Gregg, Brian A

    2005-07-21

    An in-depth study of n-type doping in a crystalline perylene diimide organic semiconductor (PPEEB) reveals that electrostatic attractions between the dopant electron and its conjugate dopant cation cause the free carrier density to be much lower than the doping density. Measurements of the dark currents as a function of field, doping density, electrode spacing, and temperature are reported along with preliminary Hall-effect measurements. The activation energy of the current, E(aJ), decreases with increasing field and with increasing dopant density, n(d). It is the measured change in E(aJ) with n(d) that accounts primarily for the variations between PPEEB films; the two adjustable parameters employed to fit the current-voltage data proved to be almost constants, independent of n(d) and temperature. The free electron density and the electron mobility are nonlinearly coupled through their shared dependences on both field and temperature. The data are fit to a modified Poole-Frenkel-like model that is shown to be valid for three important electronic processes in organic (excitonic) semiconductors: excitonic effects, doping, and transport. At room temperature, the electron mobility in PPEEB films is estimated to be 0.3 cm(2)/Vs; the fitted value of the mobility for an ideal PPEEB crystal is 3.4 +/- 2.7 cm(2)/Vs. The modified Poole-Frenkel factor that describes the field dependence of the current is 2 +/- 1 x 10(-4) eV (cm/V)(1/2). The analytical model is surprisingly accurate for a system that would require a coupled set of nonlinear tensor equations to describe it precisely. Being based on general electrostatic considerations, our model can form the requisite foundation for treatments of more complex systems. Some analogies to adventitiously doped materials such as pi-conjugated polymers are proposed.

  3. Photooxidation of organic wastes using semiconductor nanoclusters. 1998 annual progress report

    Energy Technology Data Exchange (ETDEWEB)

    Wilcoxon, J.P.

    1998-06-01

    'This report summarizes work after 1.5 years of a 3-year project. The authors efforts have focused on demonstration of photocatalysis of organic pollutants using nanosize MoS{sub 2}. They investigated the effects of (1) bandgap, valence and conduction band energies; (2) surface modification of MoS{sub 2} by deposition of metal and metal oxide islands to enhance electron transfer; and (3) use of semi-conductor semi-conductor composites to achieve improved charge separation and thus photooxidation of pollutants. They synthesized and studied nanosize MoS{sub 2} of three different sizes and associated bandgaps and studied photoredox reactions of nanosize MoS{sub 2} dispersed in solution and supported on a macroscopic powder. The latter would be the method of choice for use as a practical photocatalyst for water purification. As they emphasized in the original proposal, MoS{sub 2} in nanosize form can be tuned to absorb various amounts of the solar spectrum. They discovered there is an optimal choice of absorbance characteristics and valence and conduction band levels which allow the rapid photo-oxidation of a chosen organic molecule. The advantages of having a photostable material with a tunable bandgap were demonstrated in an experiment where phenol destruction with visible (> 450 nm) light occurred at a dramatically faster rate with nanoscale MoS{sub 2} catalysts compared to the best available previous material TiO{sub 2}. This was the first demonstration of rapid photooxidation of an organic molecule using a completely photostable catalyst and only visible light. The possibility of transferring electrons or holes between nanoscale MoS{sub 2} and other semiconductor materials in order to increase electron/hole lifetimes were explored. It was shown that small amounts (<5 weight %) of nanoscale MoS{sub 2} deposited on to TiO{sub 2} can lead to significant ({approximately}2) enhancements of phenol destruction rates. A number of different chemicals were

  4. Si-C linked organic monolayers on crystalline silicon surfaces as alternative gate insulators

    NARCIS (Netherlands)

    Faber, E.J.; Smet, de L.C.P.M.; Olthuis, W.; Zuilhof, H.; Sudhölter, E.J.R.; Bergveld, P.; Berg, van den A.

    2005-01-01

    Herein, the influence of silicon surface modification via SiCnH2n+1 (n=10,12,16,22) monolayer-based devices on p-type 100 and n-type 100 silicon is studied by forming MIS (metal-insulator-semiconductor) diodes using a mercury probe. From current density-voltage (J-V) and capacitance-voltage (C-V) me

  5. Si-C linked organic monolayers on crystalline silicon surfaces as alternative gate insulators

    NARCIS (Netherlands)

    Faber, E.J.; Smet, de L.C.P.M.; Olthuis, W.; Zuilhof, H.; Sudhölter, E.J.R.; Bergveld, P.; Berg, van den A.

    2005-01-01

    Herein, the influence of silicon surface modification via SiCnH2n+1 (n=10,12,16,22) monolayer-based devices on p-type 100 and n-type 100 silicon is studied by forming MIS (metal-insulator-semiconductor) diodes using a mercury probe. From current density-voltage (J-V) and capacitance-voltage (C-V)

  6. Phototreatment of Water by Organic Photosensitizers and Comparison with Inorganic Semiconductors

    Directory of Open Access Journals (Sweden)

    Merlyn Thandu

    2015-01-01

    Full Text Available Phototreatment of water is drawing the attention of many as a promising alternative to replace methods like chlorination, ozonization, and other oxidation processes, used in current disinfection methods limiting harmful side-products and by-products that can cause damage to the fauna and flora. Porphyrins, phthalocyanines, and other related organic dyes are well known for their use in photodynamic therapy (PDT. These photosensitizers cause cell death by generating reactive oxygen species (ROS especially singlet oxygen in the presence of light. Such molecules are also being explored for photodynamically treating microbial infections, killing of unwanted pathogens in the environment, and oxidation of chemical pollutants. The process of photosensitisation (phototreatment can be applied for obtaining clean, microbe-free water, thus exploiting the versatile properties of photosensitizers. This review collects the various attempts carried out for phototreatment of water using organic photosensitizers. For comparison, some reports of semiconductors (especially TiO2 used in photocatalytic treatment of water are also mentioned.

  7. Electrochromic conductive polymer fuses for hybrid organic/inorganic semiconductor memories

    Science.gov (United States)

    Möller, Sven; Forrest, Stephen R.; Perlov, Craig; Jackson, Warren; Taussig, Carl

    2003-12-01

    We demonstrate a nonvolatile, write-once-read-many-times (WORM) memory device employing a hybrid organic/inorganic semiconductor architecture consisting of thin film p-i-n silicon diode on a stainless steel substrate integrated in series with a conductive polymer fuse. The nonlinearity of the silicon diodes enables a passive matrix memory architecture, while the conductive polyethylenedioxythiophene:polystyrene sulfonic acid polymer serves as a reliable switch with fuse-like behavior for data storage. The polymer can be switched at ˜2 μs, resulting in a permanent decrease of conductivity of the memory pixel by up to a factor of 103. The switching mechanism is primarily due to a current and thermally dependent redox reaction in the polymer, limited by the double injection of both holes and electrons. The switched device performance does not degrade after many thousand read cycles in ambient at room temperature. Our results suggest that low cost, organic/inorganic WORM memories are feasible for light weight, high density, robust, and fast archival storage applications.

  8. Electron-hole recombination in disordered organic semiconductors: Validity of the Langevin formula

    Science.gov (United States)

    van der Holst, J. J. M.; van Oost, F. W. A.; Coehoorn, R.; Bobbert, P. A.

    2009-12-01

    Accurate modeling of electron-hole recombination in organic light-emitting diodes (OLEDs) is essential for developing a complete description of their functioning. Traditionally, the recombination rate is described by the Langevin formula, with a proportionality factor equal to the sum of the electron and hole mobilities. In the disordered organic semiconductors used in OLEDs these mobilities have been shown to depend strongly on the carrier densities and on the electric field. Moreover, the energetic disorder leads to percolating pathways for the electron and hole currents, which may or may not be correlated. To answer the question whether the Langevin formula is still valid under such circumstances we perform Monte Carlo simulations of the recombination rate for Gaussian energetic disorder. We vary the disorder energy, the temperature, the densities, and mobility ratio of electrons and holes, the electric field, and the type of correlation between the electron and hole energies. We find that at zero electric field the Langevin formula is surprisingly well obeyed, provided that a change in the charge-carrier mobilities due to the presence of charge carriers of the opposite type is taken into account. Deviations from the Langevin formula at finite electric field are small at the field scale relevant for OLED modeling.

  9. Electrochemically active, crystalline, mesoporous covalent organic frameworks on carbon nanotubes for synergistic lithium-ion battery energy storage.

    Science.gov (United States)

    Xu, Fei; Jin, Shangbin; Zhong, Hui; Wu, Dingcai; Yang, Xiaoqing; Chen, Xiong; Wei, Hao; Fu, Ruowen; Jiang, Donglin

    2015-02-04

    Organic batteries free of toxic metal species could lead to a new generation of consumer energy storage devices that are safe and environmentally benign. However, the conventional organic electrodes remain problematic because of their structural instability, slow ion-diffusion dynamics, and poor electrical conductivity. Here, we report on the development of a redox-active, crystalline, mesoporous covalent organic framework (COF) on carbon nanotubes for use as electrodes; the electrode stability is enhanced by the covalent network, the ion transport is facilitated by the open meso-channels, and the electron conductivity is boosted by the carbon nanotube wires. These effects work synergistically for the storage of energy and provide lithium-ion batteries with high efficiency, robust cycle stability, and high rate capability. Our results suggest that redox-active COFs on conducting carbons could serve as a unique platform for energy storage and may facilitate the design of new organic electrodes for high-performance and environmentally benign battery devices.

  10. Coupling between electrolyte and organic semiconductor in electrolyte-gated organic field effect transistors (Conference Presentation)

    Science.gov (United States)

    Biscarini, Fabio; Di Lauro, Michele; Berto, Marcello; Bortolotti, Carlo A.; Geerts, Yves H.; Vuillaume, Dominique

    2016-11-01

    Organic field effect transistors (OFET) operated in aqueous environments are emerging as ultra-sensitive biosensors and transducers of electrical and electrochemical signals from a biological environment. Their applications range from detection of biomarkers in bodily fluids to implants for bidirectional communication with the central nervous system. They can be used in diagnostics, advanced treatments and theranostics. Several OFET layouts have been demonstrated to be effective in aqueous operations, which are distinguished either by their architecture or by the respective mechanism of doping by the ions in the electrolyte solution. In this work we discuss the unification of the seemingly different architectures, such as electrolyte-gated OFET (EGOFET), organic electrochemical transistor (OECT) and dual-gate ion-sensing FET. We first demonstrate that these architectures give rise to the frequency-dependent response of a synapstor (synapse-like transistor), with enhanced or depressed modulation of the output current depending on the frequency of the time-dependent gate voltage. This behavior that was reported for OFETs with embedded metal nanoparticles shows the existence of a capacitive coupling through an equivalent network of RC elements. Upon the systematic change of ions in the electrolyte and the morphology of the charge transport layer, we show how the time scale of the synapstor is changed. We finally show how the substrate plays effectively the role of a second bottom gate, whose potential is actually fixed by the pH/composition of the electrolyte and the gate voltage applied.

  11. Quantitative analysis of lattice disorder and crystallite size in organic semiconductor thin films

    KAUST Repository

    Rivnay, Jonathan

    2011-07-07

    The crystallite size and cumulative lattice disorder of three prototypical, high-performing organic semiconducting materials are investigated using a Fourier-transform peak shape analysis routine based on the method of Warren and Averbach (WA). A thorough incorporation of error propagation throughout the multistep analysis and a weighted fitting of Fourier-transformed data to the WA model allows for more accurate results than typically obtained and for determination of confidence bounds. We compare results obtained when assuming two types of column-length distributions, and discuss the benefits of each model in terms of simplicity and accuracy. For strongly disordered materials, the determination of a crystallite size is greatly hindered because disorder dominates the coherence length, not finite size. A simple analysis based on trends of peak widths and Lorentzian components of pseudo-Voigt line shapes as a function of diffraction order is also discussed as an approach to more easily and qualitatively assess the amount and type of disorder present in a sample. While applied directly to organic systems, this methodology is general for the accurate deconvolution of crystalline size and lattice disorder for any material investigated with diffraction techniques. © 2011 American Physical Society.

  12. P-doped organic semiconductor: Potential replacement for PEDOT:PSS in organic photodetectors

    Science.gov (United States)

    Herrbach, J.; Revaux, A.; Vuillaume, D.; Kahn, A.

    2016-08-01

    In this work, we present an alternative to the use of PEDOT:PSS as hole transport and electron blocking layers in organic photodetectors processed by solution. As Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is known to be sensitive to humidity, oxygen, and UV, removing this layer is essential for lifetime improvements. As a first step to achieving this goal, we need to find an alternative layer that fulfills the same role in order to obtain a working diode with similar or better performance. As a replacement, a layer of poly[(4,8-bis-(2-ethylhexyloxy)-benzo(1,2-b:4,5-b')dithiophene)-2,6-diyl-alt-(4-(2-ethylhexanoyl)-thieno[3,4-b]thiophene-)-2-6-diyl)] (PBDTTT-c) p-doped with the dopant tris-[1-(trifluoroethanoyl)-2-(trifluoromethyl)ethane-1,2-dithiolene] (Mo(tfd-COCF3)3) is used. This p-doped layer effectively lowers the hole injection barrier, and the low electron affinity of the polymer prevents the injection of electrons into the active layer. We show similar device performance under light and the improvements of detection performance with the doped layer in comparison with PEDOT:PSS, leading to a detectivity of 1.9 × 1013 cm (Hz)1/2 (W)-1, competitive with silicon diodes used in imaging applications. Moreover, contrary to PEDOT:PSS, no localization of the p-doped layer is needed, leading to a diode active area defined by the patterned electrodes.

  13. Investigation of defect states in organic semiconductors. Towards long term stable materials for organic photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Schafferhans, Julia

    2011-07-01

    In this work, the trap states in the conjugated polymer P3HT, often used as electron donor in organic bulk heterojunction solar cells, three commonly used fullerene based electron acceptors and P3HT:PC{sub 61}BM blends were investigated. Concerning the lifetime of organic solar cells the influence of oxygen on P3HT and P3HT:PC{sub 61}BM blends was studied. Fractional TSC measurements on P3HT diodes revealed a quasi-continuous trap distribution. The deeper traps exhibited a strong dependence on oxygen. Exposure of the P3HT diodes to oxygen, ambient air and synthetic (dry) air all revealed an increase of the deeper traps density with exposure time in the same manner. While the lower limit of the trap density in non aged P3HT samples was in the range of (1.0-1.2) x 10{sup 22} m{sup -3}, it was more than doubled after an exposure of 50 h to air. An increase of the trap density with oxygen exposure time was also seen in the Q-DLTS measurements accompanied with an increase of the temperature dependence of the emission rates. Due to the raise in density of the deeper traps, the charge carrier mobility in P3HT significantly decreased, as revealed by photo-CELIV measurements, resulting in a loss in mobility of about two orders of magnitude after 100 h exposure to synthetic air. This effect was partially reversible by applying vacuum to the sample for several hours or, more significantly, by a thermal treatment of the devices in nitrogen atmosphere. The trap states in the methanofullerenes PC{sub 61}BM, bisPC{sub 61}BM and PC71BM were investigated by TSC measurements. PC{sub 61}BM yielded a broad quasi-continuous trap distribution with the maximum of the distribution at about 75 meV. The comparison of the TSC spectra of the three methanofullerenes exhibited significant differences in the trap states with higher activation energies of the most prominent traps in bisPC{sub 61}BM and PC71BM compared to PC{sub 61}BM. The lower limit of the trap density of all of the three

  14. Field-effect transistors with vacuum-deposited organic-inorganic perovskite films as semiconductor channels

    Science.gov (United States)

    Matsushima, Toshinori; Yasuda, Takeshi; Fujita, Katsuhiko; Adachi, Chihaya

    2016-12-01

    Films of the organic-inorganic layered perovskite (C6H5C2H4NH3)2SnI4 were vacuum-deposited on substrates heated at various temperatures (Tsub) to investigate the influence of Tsub on their film quality and transistor performance (hole mobilities, threshold voltages, and current on/off ratios). Appropriate substrate heating at Tsub = 60 °C during vacuum deposition led to better-developed perovskite films with larger grains. These films exhibited the best transistor performance in comparison with films fabricated at the other Tsub. The transistor performance was further enhanced by reducing perovskite semiconductor thickness (t) because of a reduction of bulk resistance in a top-contact/bottom-gate transistor structure. By utilizing the optimized Tsub of 60 °C and t of 31 nm, we obtained the most improved hole mobility of 0.78 ± 0.24 cm2/V s, about 5000 times the hole mobilities of our initial transistors fabricated at Tsub = 24 °C and t = 50 nm.

  15. Strain-induced vertical self-organization of semiconductor quantum dots: A computational study

    Energy Technology Data Exchange (ETDEWEB)

    Shtinkov, N., E-mail: nshtinkov@uottawa.ca [Department of Physics, University of Ottawa, 150 Louis Pasteur, Ottawa (Ontario) K1N 6N5 (Canada)

    2013-12-28

    Atomistic strain simulations based on the valence force field method are employed to study the vertical arrangements of semiconductor quantum dot (QD) multilayers. The effects of the QD shape, dimensions, and materials parameters are systematically investigated, varying independently the following parameters: spacer width H, QD lateral spacing D, base b, and height h, slope of the side facets, elastic properties of the dot and the substrate materials, and lattice mismatch between the dot and the substrate. The transition between vertically aligned and anti-aligned structures is found to be determined mainly by the ratios H/D and b/D, as well as by the strain anisotropy of the substrate and to a lesser extent of the QD. The dependence on the QD height h is significant only for steep side facets and large aspect ratios h/b, and the effects of the lattice mismatch strain and the bulk elastic moduli are found to be negligible. The comparison with experimental data shows an excellent agreement with the results from the simulations, demonstrating that the presented analysis results in precise theoretical predictions for the vertical self-organization regime in a wide range of QD materials systems.

  16. Thermal stability and molecular ordering of organic semiconductor monolayers: effect of an anchor group.

    Science.gov (United States)

    Jones, Andrew O F; Knauer, Philipp; Resel, Roland; Ringk, Andreas; Strohriegl, Peter; Werzer, Oliver; Sferrazza, Michele

    2015-06-01

    The thermal stability and molecular order in monolayers of two organic semiconductors, PBI-PA and PBI-alkyl, based on perylene derivatives with an identical molecular structure except for an anchor group for attachment to the substrate in PBI-PA, are reported. In situ X-ray reflectivity measurements are used to follow the stability of these monolayers in terms of order and thickness as temperature is increased. Films have thicknesses corresponding approximately to the length of one molecule; molecules stand upright on the substrate with a defined structure. PBI-PA monolayers have a high degree of order at room temperature and a stable film exists up to 250 °C, but decomposes rapidly above 300 °C. In contrast, stable physisorbed PBI-alkyl monolayers only exist up to 100 °C. Above the bulk melting point at 200 °C no more order exists. The results encourage using anchor groups in monolayers for various applications as it allows enhanced stability at the interface with the substrate.

  17. A scale-bridging modeling approach for anisotropic organic molecules at patterned semiconductor surfaces.

    Science.gov (United States)

    Kleppmann, Nicola; Klapp, Sabine H L

    2015-02-14

    Hybrid systems consisting of organic molecules at inorganic semiconductor surfaces are gaining increasing importance as thin film devices for optoelectronics. The efficiency of such devices strongly depends on the collective behavior of the adsorbed molecules. In the present paper, we propose a novel, coarse-grained model addressing the condensed phases of a representative hybrid system, that is, para-sexiphenyl (6P) at zinc-oxide (ZnO). Within our model, intermolecular interactions are represented via a Gay-Berne potential (describing steric and van-der-Waals interactions) combined with the electrostatic potential between two linear quadrupoles. Similarly, the molecule-substrate interactions include a coupling between a linear molecular quadrupole to the electric field generated by the line charges characterizing ZnO(10-10). To validate our approach, we perform equilibrium Monte Carlo simulations, where the lateral positions are fixed to a 2D lattice, while the rotational degrees of freedom are continuous. We use these simulations to investigate orientational ordering in the condensed state. We reproduce various experimentally observed features such as the alignment of individual molecules with the line charges on the surface, the formation of a standing uniaxial phase with a herringbone structure, as well as the formation of a lying nematic phase.

  18. Influence of structural fluctuations on lifetimes of adsorbate states at hybrid organic-semiconductor interfaces

    Science.gov (United States)

    Müller, M.; Sánchez-Portal, D.; Lin, H.; Fratesi, G.; Brivio, G. P.; Selloni, A.

    On the road towards a more realistic description of charge transfer processes at hybrid organic-semiconductor interfaces for photovoltaic applications we extend our first-principles scheme for the extraction of elastic linewidths to include the effects of structural fluctuations. Based on snapshots obtained from Car-Parinello molecular dynamics simulations at room temperature, we set up geometries in which dye molecules at interfaces are attached to a semi-infinite TiO2 substrate. The elastic linewidths are computed using a Green's function method. This effectively introduces the coupling to a continuum of states in the substrate. In particular we investigate catechol and isonicotinic acid on rutile(110) and anatase(101) at the level of semi-local density functional theory. We perform multiple calculations of linewidths and peak-positions associated with the adsorbate's frontier orbitals for different geometric configurations to obtain a time-averaged analysis of such physical properties. We compare the results from the considered systems to understand the effects of dynamics onto interfacial charge transfer and systematically assess the dependence of the extracted elastic lifetimes on the relative alignment between adsorbate and substrate states. This project has received funding from the European Union Seventh Framework Programme under Grant Agreement No. 607323 [THINFACE].

  19. Different electronic and charge-transport properties of four organic semiconductors Tetraazaperopyrenes derivatives

    Science.gov (United States)

    Shi, Yarui; Wei, Huiling; Liu, Yufang

    2015-03-01

    Tetraazaperopyrenes (TAPPs) derivatives are high-performance n-type organic semiconductor material families with the remarkable long-term stabilities. The charge carrier mobilities in TAPPs derivatives crystals were calculated by the density functional theory (DFT) method combined with the Marcus-Hush electron-transfer theory. The existence of considerable C-H…F-C bonding defines the conformation of the molecular structure and contributes to its stability. We illustrated how it is possible to control the electronic and charge-transport parameters of TAPPs derivatives as a function of the positions, a type of the substituents. It is found that the core substitution of TAPPs has a drastic influence on the charge-transport mobilities. The maximum electron mobility value of the core-brominated 2,9-bis (perfluoroalkyl)-substituted TAPPs is 0.521 cm2 V-1 s-1, which appear in the orientation angle 95° and 275°. The results demonstrate that the TAPPs with bromine substituents in ortho positions exhibit the best charge-transfer efficiency among the four different TAPP derivatives.

  20. Ion bombardment induced morphology modifications on self-organized semiconductor surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Hofer, C. E-mail: christian.hofer@unileoben.ac.at; Abermann, S.; Teichert, C.; Bobek, T.; Kurz, H.; Lyutovich, K.; Kasper, E

    2004-02-01

    The successful generation of well ordered nanopatterns on III-V semiconductor surfaces by ion erosion initiated attempts to obtain similar effects on silicon surfaces. High resolution atomic-force microscopy (AFM) is used to quantify the morphological changes of self-organized silicon/germanium films on Si(0 0 1) during ion bombardment. A nanofaceted SiGe film exhibiting a checkerboard array of {l_brace}1 0 5{r_brace} faceted pyramids and pits was eroded by Ar{sup +} ions of 100-1000 eV under normal incidence. Two characteristic energy regimes have been found. For ion energies below 750 eV the pyramidal pits transform into shallow troughs before smaller craters form. At ion energies of 750 eV and above, a significant smoothening of the surface was observed, finally resulting in a vanishing of the pattern. The influence of the initial pattern and the ion energy on the morphological changes are compared for different SiGe-films. Since at low ion energies the checkerboard array of {l_brace}1 0 5{r_brace} pyramids and pits could be transferred into the silicon substrate this procedure illustrates an alternative way to nanostructure silicon surfaces by ion erosion.

  1. Improving the Stability of Organic Semiconductors: Distortion Energy versus Aromaticity in Substituted Bistetracene

    KAUST Repository

    Thomas, Simil

    2016-11-15

    Polycyclic aromatic hydrocarbons (PAHs) have been widely explored as molecular semiconductors in organic electronic devices such as field-effect transistors or solar cells. However, their tendency to undergo photooxidation is a primary limitation to their practical applications. Bistetracene derivatives have recently been demonstrated to possess much larger photo oxidation stability than the widely investigated pentacene and rubrene, while maintaining high charge-carrier mobilities. Here, using several levels of density functional theory, we identify the origin of the increased stability of bistetracene with respect to molecular oxygen by systematically investigating the [4 + 2] cycloaddition (Diels Alder) photooxidation reaction mechanism. Importantly, our computational results indicate that endoperoxide formation in bis(2-(trimethylsilyl)ethynyl) bistetracene (BT) occurs not on the ring with least aromaticity, but rather on the ring with smallest distortion energy. This feature was subsequently confirmed by experimental NMR analyses. The oxidation activation barriers of bistetracene, pentacene, and rubrene are found to be 17.7, 13.6, and 14.4 kcal/mol, respectively, in agreement with the observed order of stability of these molecules with respect to oxidation reactions in solution. In the cases of BT and pentacene, the rates of electron transfer to create charged species (PAH(+) and O-2) are at least two orders of magnitude lower than that of the charge recombination process (back to PAH and O-2); for rubrene, both of these processes are calculated to be of the same order of magnitude, in agreement with experimental electron paramagnetic resonance spectroscopy observations.

  2. Electrochemical Capture and Release of CO2 in Aqueous Electrolytes Using an Organic Semiconductor Electrode.

    Science.gov (United States)

    Apaydin, Dogukan H; Gora, Monika; Portenkirchner, Engelbert; Oppelt, Kerstin T; Neugebauer, Helmut; Jakesova, Marie; Głowacki, Eric D; Kunze-Liebhäuser, Julia; Zagorska, Malgorzata; Mieczkowski, Jozef; Sariciftci, Niyazi Serdar

    2017-04-19

    Developing efficient methods for capture and controlled release of carbon dioxide is crucial to any carbon capture and utilization technology. Herein we present an approach using an organic semiconductor electrode to electrochemically capture dissolved CO2 in aqueous electrolytes. The process relies on electrochemical reduction of a thin film of a naphthalene bisimide derivative, 2,7-bis(4-(2-(2-ethylhexyl)thiazol-4-yl)phenyl)benzo[lmn][3,8]phenanthroline-1,3,6,8(2H,7H)-tetraone (NBIT). This molecule is specifically tailored to afford one-electron reversible and one-electron quasi-reversible reduction in aqueous conditions while not dissolving or degrading. The reduced NBIT reacts with CO2 to form a stable semicarbonate salt, which can be subsequently oxidized electrochemically to release CO2. The semicarbonate structure is confirmed by in situ IR spectroelectrochemistry. This process of capturing and releasing carbon dioxide can be realized in an oxygen-free environment under ambient pressure and temperature, with uptake efficiency for CO2 capture of ∼2.3 mmol g(-1). This is on par with the best solution-phase amine chemical capture technologies available today.

  3. Use of a hexapod in diffraction measurements of substrate-supported crystals of organic semiconductors.

    Science.gov (United States)

    Yang, Lin; Yang, Hoichang

    2009-11-01

    Thin films of organic semiconductor prepared on substrates generally contain crystals that have one common crystal plane parallel to the substrate but random in-plane orientations. In diffraction measurements of these structures, it is often required to anchor the X-ray beam on a fixed spot on the sample, such as an optically visible crystallite or island. Here, a hexapod is used in place of a traditional multi-circle diffractometer to perform area-detector-based diffraction measurements on an actual device that contains 6,13-bis(triisopropyl-silyethynyl)-pentacene (TIPS-pentacene) crystals. The hexapod allows for sample rotations about any user-defined rotation center. Two types of complex sample motions have been programmed to characterize the structure of the TIPS-pentacene crystal: an in-plane powder average has been performed at a fixed grazing-incident angle to determine the lattice parameters of the crystal; then the in-plane component of the scattering vector was continuously rotated in transmission geometry to determine the local crystal orientation.

  4. Calculation of the spectrum of quasiparticle electron excitations in organic molecular semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Tikhonov, E. V., E-mail: tikhonov@mig.phys.msu.ru [Moscow State University (Russian Federation); Uspenskii, Yu. A. [Russian Academy of Sciences, Lebedev Physical Institute (Russian Federation); Khokhlov, D. R. [Moscow State University (Russian Federation)

    2015-06-15

    A quasiparticle electronic spectrum belongs to the characteristics of nanoobjects that are most important for applications. The following methods of calculating the electronic spectrum are analyzed: the Kohn-Sham equations of the density functional theory (DFT), the hybrid functional method, the GW approximation, and the Lehmann approximation used in the spectral representation of one-electron Green’s function. The results of these approaches are compared with the data of photoemission measurements of benzene, PTCDA, and phthalocyanine (CuPc, H{sub 2}Pc, FePc, PtPc) molecules, which are typical representatives of organic molecular semiconductors (OMS). This comparison demonstrates that the Kohn-Sham equations of DFT incorrectly reproduce the electronic spectrum of OMS. The hybrid functional method correctly describes the spectrum of the valence and conduction bands; however, the HOMO-LUMO gap width is significantly underestimated. The correct gap width is obtained in both the GW approximation and the Lehmann approach, and the total energy in this approach can be calculated in the local density approximation of DFT.

  5. Modeling of the transient mobility in disordered organic semiconductors with a Gaussian density of states

    Science.gov (United States)

    Germs, W. Chr.; van der Holst, J. J. M.; van Mensfoort, S. L. M.; Bobbert, P. A.; Coehoorn, R.

    2011-10-01

    The charge-carrier mobility in organic semiconductors is often studied using non-steady-state experiments. However, energetic disorder can severely hamper the analysis due to the occurrence of a strong time dependence of the mobility caused by carrier relaxation. The multiple-trapping model is known to provide an accurate description of this effect. However, the value of the conduction level energy and the hopping attempt rate, which enter the model as free parameters, are not a priori known for a given material. We show how for the case of a Gaussian density of states both parameters can be deduced from the parameter values used to describe the measured dc current-voltage characteristics within the framework of the extended Gaussian disorder model. The approach is validated using three-dimensional Monte Carlo modeling. In the analysis, the charge-density dependence of the time-dependent mobility is included. The model is shown to successfully predict the low-frequency differential capacitance of sandwich-type devices based on a polyfluorene copolymer.

  6. Mechanistic Studies of Charge Injection from Metallic Electrodes into Organic Semiconductors Mediated by Ionic Functionalities: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Thuc-Quyen [UCSB; Bazan, Guillermo [UCSB; Mikhailovsky, Alexander [UCSB

    2014-04-15

    Metal-organic semiconductor interfaces are important because of their ubiquitous role in determining the performance of modern electronics such as organic light emitting diodes (OLEDs), fuel cells, batteries, field effect transistors (FETs), and organic solar cells. Interfaces between metal electrodes required for external wiring to the device and underlying organic structures directly affect the charge carrier injection/collection efficiency in organic-based electronic devices primarily due to the mismatch between energy levels in the metal and organic semiconductor. Environmentally stable and cost-effective electrode materials, such as aluminum and gold typically exhibit high potential barriers for charge carriers injection into organic devices leading to increased operational voltages in OLEDs and FETs and reduced charge extraction in photovoltaic devices. This leads to increased power consumption by the device, reduced overall efficiency, and decreased operational lifetime. These factors represent a significant obstacle for development of next generation of cheap and energy-efficient components based on organic semiconductors. It has been noticed that introduction of organic materials with conjugated backbone and ionic pendant groups known as conjugated poly- and oligoelectrolytes (CPEs and COEs), enables one to reduce the potential barriers at the metal-organic interface and achieve more efficient operation of a device, however exact mechanisms of the phenomenon have not been understood. The goal of this project was to delineate the function of organic semiconductors with ionic groups as electron injection layers. The research incorporated a multidisciplinary approach that encompassed the creation of new materials, novel processing techniques, examination of fundamental electronic properties and the incorporation of the resulting knowledgebase into development of novel organic electronic devices with increased efficiency, environmental stability, and reduced

  7. Activation energy spectra: insights into transport limitations of organic semiconductors and photovoltaic cells

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Ziqi; Nardes, Alexandre M.; Van de Lagemaat, Jao; Gregg, Brian A. [National Renewable Energy Laboratory, Golden, CO (United States)

    2012-03-07

    Some mechanisms of charge transport in organic semiconductors and organic photovoltaic (OPV) cells can be distinguished by their predicted change in activation energy for the current, E{sub a}, versus applied field, F. E{sub a} versus F is measured first in pure films of commercially available regioregular poly(3-hexylthiophene) (P3HT) and in the same P3HT treated to reduce its charged defect density. The former shows a Poole-Frenkel (PF)-like decrease in E{sub a} at low F, which then plateaus at higher F. The low defect material does not exhibit PF behavior and E{sub a} remains approximately constant. Upon addition of [6,6]-phenyl-C{sub 61}-butyric acid methyl ester (PCBM), however, both materials show a large increase in E{sub a} and exhibit PF-like behavior over the entire field range. These results are explained with a previously proposed model of transport that considers both the localized random disorder in the energy levels and the long-range electrostatic fluctuations resulting from charged defects. Activation energy spectra in working OPV cells show that the current is injection-limited over most of the voltage range but becomes transport-limited, with a large peak in E{sub a}, near the open circuit photovoltage. This causes a decrease in fill factor, which may be a general limitation in such solar cells. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  8. Chemical-state analysis of organic semiconductors using soft X-ray absorption spectroscopy combined with first-principles calculation.

    Science.gov (United States)

    Natsume, Yutaka; Kohno, Teiichiro; Minakata, Takashi; Konishi, Tokuzo; Gullikson, Eric M; Muramatsu, Yasuji

    2012-02-16

    The chemical states of organic semiconductors were investigated by total-electron-yield soft X-ray absorption spectroscopy (TEY-XAS) and first-principles calculations. The organic semiconductors, pentacene (C(22)H(14)) and pentacenequinone (C(22)H(12)O(2)), were subjected to TEY-XAS and the experimental spectra obtained were compared with the 1s core-level excited spectra of C and O atoms, calculated by a first-principles planewave pseudopotential method. Excellent agreement between the measured and the calculated spectra were obtained for both materials. Using this methodology, we examined the chemical states of the aged pentacene, and confirmed that both C-OH and C═O chemical bonds are generated by exposure to air. This result implies that not only oxygen but also humidity causes pentacene oxidation.

  9. Unipolar resistive switching in metal oxide/organic semiconductor non-volatile memories as a critical phenomenon

    Energy Technology Data Exchange (ETDEWEB)

    Bory, Benjamin F.; Meskers, Stefan C. J., E-mail: s.c.j.meskers@tue.nl [Molecular Materials and Nanosystems and Institute for Complex Molecular Systems, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven (Netherlands); Rocha, Paulo R. F. [Instituto de Telecomunicações, Av. Rovisco, Pais, 1, 1049-001 Lisboa, Portugal and Universidade do Algarve, Campus de Gambelas, 8005-139 Faro (Portugal); Max-Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz (Germany); Gomes, Henrique L. [Instituto de Telecomunicações, Av. Rovisco, Pais, 1, 1049-001 Lisboa, Portugal and Universidade do Algarve, Campus de Gambelas, 8005-139 Faro (Portugal); Leeuw, Dago M. de [Max-Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz (Germany)

    2015-11-28

    Diodes incorporating a bilayer of an organic semiconductor and a wide bandgap metal oxide can show unipolar, non-volatile memory behavior after electroforming. The prolonged bias voltage stress induces defects in the metal oxide with an areal density exceeding 10{sup 17 }m{sup −2}. We explain the electrical bistability by the coexistence of two thermodynamically stable phases at the interface between an organic semiconductor and metal oxide. One phase contains mainly ionized defects and has a low work function, while the other phase has mainly neutral defects and a high work function. In the diodes, domains of the phase with a low work function constitute current filaments. The phase composition and critical temperature are derived from a 2D Ising model as a function of chemical potential. The model predicts filamentary conduction exhibiting a negative differential resistance and nonvolatile memory behavior. The model is expected to be generally applicable to any bilayer system that shows unipolar resistive switching.

  10. Unipolar resistive switching in metal oxide/organic semiconductor non-volatile memories as a critical phenomenon

    Science.gov (United States)

    Bory, Benjamin F.; Rocha, Paulo R. F.; Gomes, Henrique L.; de Leeuw, Dago M.; Meskers, Stefan C. J.

    2015-11-01

    Diodes incorporating a bilayer of an organic semiconductor and a wide bandgap metal oxide can show unipolar, non-volatile memory behavior after electroforming. The prolonged bias voltage stress induces defects in the metal oxide with an areal density exceeding 1017 m-2. We explain the electrical bistability by the coexistence of two thermodynamically stable phases at the interface between an organic semiconductor and metal oxide. One phase contains mainly ionized defects and has a low work function, while the other phase has mainly neutral defects and a high work function. In the diodes, domains of the phase with a low work function constitute current filaments. The phase composition and critical temperature are derived from a 2D Ising model as a function of chemical potential. The model predicts filamentary conduction exhibiting a negative differential resistance and nonvolatile memory behavior. The model is expected to be generally applicable to any bilayer system that shows unipolar resistive switching.

  11. Electrochemical studies of redox probes in self-organized lyotropic liquid crystalline systems

    Indian Academy of Sciences (India)

    P Suresh Kumar; V Lakshminarayanan

    2009-09-01

    Lyotropic liquid crystalline phases formed by surfactants are of special importance due to their close resemblance to biological systems. The redox reactions in such ordered media are of fundamental interest in understanding several complex processes occurring in the biological media, where the former can act as model systems. In this work, we have carried out the redox reactions of benzoquinone| hydroquinone, methyl viologen and ferrocenemethanol probes in a lyotropic hexagonal columnar phase (H1 phase) using cyclic voltammetry and electrochemical impedance spectroscopic studies. The liquid crystalline phase we have studied is made up of the non-ionic surfactant, Triton X-100 and water. Polarizing optical microscopic examination confirmed that the columnar hexagonal phase is retained even after the addition of redox probe as well as the supporting electrolyte. Our studies show a significant shift in the half-peak potentials of the redox probes in the H1 phase as compared to the solvent phase. The diffusion coefficient values for different redox probes in the H1 phase were also found to be significantly reduced when compared to the corresponding solvent media.

  12. Heteroepitaxial growth of 3-5 semiconductor compounds by metal-organic chemical vapor deposition for device applications

    Science.gov (United States)

    Collis, Ward J.; Abul-Fadl, Ali

    1988-01-01

    The purpose of this research is to design, install and operate a metal-organic chemical vapor deposition system which is to be used for the epitaxial growth of 3-5 semiconductor binary compounds, and ternary and quaternary alloys. The long-term goal is to utilize this vapor phase deposition in conjunction with existing current controlled liquid phase epitaxy facilities to perform hybrid growth sequences for fabricating integrated optoelectronic devices.

  13. Photocatalytic oxidation of organic compounds in a hybrid system composed of a molecular catalyst and visible light-absorbing semiconductor.

    Science.gov (United States)

    Zhou, Xu; Li, Fei; Li, Xiaona; Li, Hua; Wang, Yong; Sun, Licheng

    2015-01-14

    Photocatalytic oxidation of organic compounds proceeded efficiently in a hybrid system with ruthenium aqua complexes as catalysts, BiVO4 as a light absorber, [Co(NH3)5Cl](2+) as a sacrificial electron acceptor and water as an oxygen source. The photogenerated holes in the semiconductor are used to oxidize molecular catalysts into the high-valent Ru(IV)=O intermediates for 2e(-) oxidation.

  14. Semiconductor materials for solar photovoltaic cells

    CERN Document Server

    Wong-Ng, Winnie; Bhattacharya, Raghu

    2016-01-01

    This book reviews the current status of semiconductor materials for conversion of sunlight to electricity, and highlights advances in both basic science and manufacturing.  Photovoltaic (PV) solar electric technology will be a significant contributor to world energy supplies when reliable, efficient PV power products are manufactured in large volumes at low cost.  Expert chapters cover the full range of semiconductor materials for solar-to-electricity conversion, from crystalline silicon and amorphous silicon to cadmium telluride, copper indium gallium sulfide selenides, dye sensitized solar cells, organic solar cells, and environmentally friendly copper zinc tin sulfide selenides. The latest methods for synthesis and characterization of solar cell materials are described, together with techniques for measuring solar cell efficiency. Semiconductor Materials for Solar Photovoltaic Cells presents the current state of the art as well as key details about future strategies to increase the efficiency and reduce ...

  15. Materials Design via Optimized Intramolecular Noncovalent Interactions for High-Performance Organic Semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Xiaojie; Liao, Qiaogan; Manley, Eric F.; Wu, Zishan; Wang, Yulun; Wang, Weida; Yang, Tingbin; Shin, Young-Eun; Cheng, Xing; Liang, Yongye; Chen, Lin X.; Baeg, Kang-Jun; Marks, Tobin J.; Guo, Xugang

    2016-03-15

    We report the design, synthesis, and implemention in semiconducting polymers of a novel head-to-head linkage containing the TRTOR (3-alkyl-3'-alkoxy-2,2'-bithiophene) donor subunit having a single strategically optimized, planarizing noncovalent S···O interaction. Diverse complementary thermal, optical, electrochemical, X-ray scattering, electrical, photovoltaic, and electron microscopic characterization techniques are applied to establish structure-property correlations in a TRTOR-based polymer series. In comparison to monomers having double S···O interactions, replacing one alkoxy substituent with a less electron-donating alkyl one yields TRTOR-based polymers with significantly depressed (0.2-0.3 eV) HOMOs. Furthermore, the weaker single S···O interaction and greater TRTOR steric encumberance enhances materials processability without sacrificing backbone planarity. From another perspective, TRTOR has comparable electronic properties to ring-fused 5Hdithieno[ 3,2-b:2',3'-d]pyran (DTP) subunits, but a centrosymmetric geometry which promotes a more compact and ordered structure than bulkier, axisymmetric DTP. Compared to monosubstituted TTOR (3-alkoxy-2,2'-bithiophene), alkylation at the TRTOR bithiophene 3-position enhances conjugation and polymer crystallinity with contracted π-π stacking. Grazing incidence wide-angle X-ray scattering (GIWAXS) data reveal that the greater steric hindrance and the weaker single S···O interaction are not detrimental to close packing and high crystallinity. As a proof of materials design, copolymerizing TRTOR with phthalimides yields copolymers with promising thin-film transistor mobility as high as 0.42 cm2/(V·s) and 6.3% power conversion efficiency in polymer solar cells, the highest of any phthalimide copolymers reported to date. The depressed TRTOR HOMOs imbue these polymers with substantially increased Ion/Ioff ratios and Voc’s versus analogous subunits with multiple electron donating

  16. Birefringence-dependent linearly-polarized emission in a liquid crystalline organic light emitting polymer.

    Science.gov (United States)

    Lee, Dong-Myoung; Lee, You-Jin; Kim, Jae-Hoon; Yu, Chang-Jae

    2017-02-20

    We investigated the linearly polarized emission of uniformly aligned poly(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3]thia-diazol-4,8-diyl) (F8BT) with a liquid crystalline phase on a rubbed alignment layer. The polarization ratio, defined by the ratio of luminous intensities polarized parallel and perpendicular to the rubbed direction, gradually decreased with increasing thickness of the F8BT film. In the photoluminescence (PL) process, the polarized light is emitted throughout the whole F8BT film, while in the electroluminescence (EL) process, the polarized light is emitted at a certain region within the F8BT film. The thickness-dependent polarization ratios in both PL and EL processes were successfully described based on a simple model wherein the mean optical birefringence was expressed as a function of the thickness of the F8BT film.

  17. Probing Electronic, Structural, and Charge Transfer Properties of Organic Semiconductor/Inorganic Oxide Interfaces Using Field-Effect Transistors

    Science.gov (United States)

    Spalenka, Josef Wade

    Interfaces between organic semiconductors and inorganic oxides provide the functionality for devices including field-effect transistors (FETs) and organic photovoltaics. Organic FETs are sensitive to the physical structure and electronic properties of the few molecular layers of material at the interface between the semiconducting channel and the gate dielectric, and provide quantitative information such as the field-effect mobility of charge carriers and the concentration of trapped charge. In this thesis, FET interfaces between organic small-molecule semiconductors and SiO2, and donor/acceptor interfaces between organic small-molecules and the wide bandgap semiconductor ZnO are studied using electrical measurements of field-effect transistor devices. Monolayer-scale films of dihexyl sexithiophene are shown to have higher hole mobility than other monolayer organic semiconductors, and the origin of the high mobility is discussed. Studies of the crystal structure of the monolayer using X-ray structural probes and atomic force microscopy reveal the crystal structure is different in the monolayer regime compared to thicker films and bulk crystals. Progress and remaining challenges are discussed for in situ X-ray diffraction studies of the dynamic changes in the local crystal structure in organic monolayers due to charge carriers generated during the application of electric fields from the gate electrode in working FETs. Studies were conducted of light sensitive organic/inorganic interfaces that are modified with organic molecules grafted to the surface of ZnO nanoparticles and thin films. These interfaces are models for donor/acceptor interfaces in photovoltaics. The process of exciton dissociation at the donor/acceptor interface was sensitive to the insulating or semiconducting molecules grafted to the ZnO, and the photoinduced charge transfer process is measured by the threshold voltage shift of FETs during illumination. Charge transfer between light sensitive donor

  18. Modeling space-charge-limited currents in organic semiconductors: Extracting trap density and mobility

    KAUST Repository

    Dacuña, Javier

    2011-11-28

    We have developed and have applied a mobility edge model that takes drift and diffusion currents to characterize the space-charge-limited current in organic semiconductors into account. The numerical solution of the drift-diffusion equation allows the utilization of asymmetric contacts to describe the built-in potential within the device. The model has been applied to extract information of the distribution of traps from experimental current-voltage measurements of a rubrene single crystal from Krellner showing excellent agreement across several orders of magnitude in the current. Although the two contacts are made of the same metal, an energy offset of 580 meV between them, ascribed to differences in the deposition techniques (lamination vs evaporation) was essential to correctly interpret the shape of the current-voltage characteristics at low voltage. A band mobility of 0.13cm 2V-1s-1 for holes is estimated, which is consistent with transport along the long axis of the orthorhombic unit cell. The total density of traps deeper than 0.1 eV was 2.2×1016cm -3. The sensitivity analysis and error estimation in the obtained parameters show that it is not possible to accurately resolve the shape of the trap distribution for energies deeper than 0.3 eV or shallower than 0.1 eV above the valence-band edge. The total number of traps deeper than 0.3 eV, however, can be estimated. Contact asymmetry and the diffusion component of the current play an important role in the description of the device at low bias and are required to obtain reliable information about the distribution of deep traps. © 2011 American Physical Society.

  19. Azine- and Azole-Functionalized Oligo´ and Polythiophene Semiconductors for Organic Thin-Film Transistors

    Directory of Open Access Journals (Sweden)

    Rocío Ponce Ortiz

    2010-03-01

    Full Text Available In the organic electronics research field, several strategies have been used to modulate the transport properties of thiophene-derived semiconductors via sequential functionalization of their π-conjugated cores. This review summarizes the major design and synthetic strategies for tuning thiophene-containing small molecule and polymer properties by introducing electron-deficient nitrogen-containing azine and azole moieties. Several examples are presented which elucidate the structural, optical, and electronic consequences of incorporating these electron-deficient fragments in the conjugated skeletons, particularly relating to applications in organic thin-film transistors.

  20. Measurement of the Charge Carrier Mobility in MEH-PPV and MEH-PPV-POSS Organic Semiconductor Films

    Science.gov (United States)

    Romanov, I. V.; Voitsekhovskii, A. V.; Dyagterenko, K. M.; Kopylova, T. N.; Kokhanenko, A. P.; Nikonova, E. N.

    2015-03-01

    The values of the charge carrier mobility in organic semiconductor materials (MEH-PPV, MEH-PPV-POSS) are obtained on the basis of an analysis of the relaxation curves of transient electroluminescence in organic light-emitting diodes (OLEDs). The data on the mobility of charge carriers are analyzed according to the Poole-Frenkel model using the dependences of the charge carrier mobility on the electric field. Physical interpretation of the transport phenomena in OLED structures based on MEH-PPV and MEH-PPV-POSS is given.

  1. Chemistry and electronic properties of metal-organic semiconductor interfaces: Fe and Co on CuPc

    Energy Technology Data Exchange (ETDEWEB)

    Aristov, Victor; Molodtsova, Olga; Knupfer, Martin [IFW Dresden, D-01069 Dresden (Germany); Ossipyan, Yurii [Institute of Solid State Physics,sian Academy of Sciences, Chernogolovka, Moscow (Russian Federation); Doyle, Bryan [TASC-INFM Laboratory, Trieste (Italy); Nannarone, Stefano [TASC-INFM Laboratory, Trieste (Italy); Dipartimento di Ingegneria dei Materiali ed Amb., Universita di Modena (Italy)

    2007-07-01

    The creation of a spin transistor based on a semiconductor was proposed in 1990 by Datta and Das. Nowadays the attractive idea to create a spin-transistor based on an organic semiconductor thin film (OMTF) has been proposed. The main problem in the development of such a device is to produce ferromagnetic metallic contacts as an injector of spin-polarized electrons into OMTF and as a drain of these spinpolarized electrons from the channel. This problem could be solved by fabrication and investigation of contacts such as Fe(Co,Ni) thin films to an OMTF. In this contribution we present the results of extensive investigations of chemistry and electronic properties of the interface formation between Fe(Co) and the archetypical organic semiconductor copper phthalocyanine (CuPc). The studies were performed by means of core-level and valence-band high-resolution photoemission electron spectroscopy as well as by near-edge X-ray absorption fine structure and using the synchrotron radiation facility ELETTRA (Italy).

  2. Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells.

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Julia, W. P.

    2008-09-01

    Solar energy conversion is increasingly being recognized as one of the principal ways to meet future energy needs without causing detrimental environmental impact. Hybrid organic-inorganic solar cells (SCs) are attracting particular interest due to the potential for low cost manufacturing and for use in new applications, such as consumer electronics, architectural integration and light-weight sensors. Key materials advantages of these next generation SCs over conventional semiconductor SCs are in design opportunities--since the different functions of the SCs are carried out by different materials, there are greater materials choices for producing optimized structures. In this project, we explore the hybrid organic-inorganic solar cell system that consists of oxide, primarily ZnO, nanostructures as the electron transporter and poly-(3-hexylthiophene) (P3HT) as the light-absorber and hole transporter. It builds on our capabilities in the solution synthesis of nanostructured semiconducting oxide arrays to this photovoltaic (PV) technology. The three challenges in this hybrid material system for solar applications are (1) achieving inorganic nanostructures with critical spacing that matches the exciton diffusion in the polymer, {approx} 10 nm, (2) infiltrating the polymer completely into the dense nanostructure arrays, and (3) optimizing the interfacial properties to facilitate efficient charge transfer. We have gained an understanding and control over growing oriented ZnO nanorods with sub-50 nm diameters and the required rod-to-rod spacing on various substrates. We have developed novel approaches to infiltrate commercially available P3HT in the narrow spacing between ZnO nanorods. Also, we have begun to explore ways to modify the interfacial properties. In addition, we have established device fabrication and testing capabilities at Sandia for prototype devices. Moreover, the control synthesis of ZnO nanorod arrays lead to the development of an efficient anti

  3. Photochromic hybrid organic-inorganic liquid-crystalline materials built from nonionic surfactants and polyoxometalates: elaboration and structural study.

    Science.gov (United States)

    Poulos, Andreas S; Constantin, Doru; Davidson, Patrick; Impéror, Marianne; Pansu, Brigitte; Panine, Pierre; Nicole, Lionel; Sanchez, Clément

    2008-06-17

    This work reports the elaboration and structural study of new hybrid organic-inorganic materials constructed via the coupling of liquid-crystalline nonionic surfactants and polyoxometalates (POMs). X-ray scattering and polarized light microscopy demonstrate that these hybrid materials, highly loaded with POMs (up to 18 wt %), are nanocomposites of liquid-crystalline lamellar structure (Lalpha), with viscoelastic properties close to those of gels. The interpretation of X-ray scattering data strongly suggests that the POMs are located close to the terminal -OH groups of the nonionic surfactants, within the aqueous sublayers. Moreover, these materials exhibit a reversible photochromism associated to the photoreduction of the polyanion. The photoinduced mixed-valence behavior has been characterized through ESR and UV-visible-near-IR spectroscopies that demonstrate the presence of W(V) metal cations and of the characteristic intervalence charge transfer band in the near-IR region, respectively. These hybrid nanocomposites exhibit optical properties that may be useful for applications involving UV-light-sensitive coatings or liquid-crystal-based photochromic switches. From a more fundamental point of view, these hybrid materials should be very helpful models for the study of both the static and dynamic properties of nano-objects confined within soft lamellar structures.

  4. Organic-inorganic halide perovskite/crystalline silicon four-terminal tandem solar cells.

    Science.gov (United States)

    Löper, Philipp; Moon, Soo-Jin; de Nicolas, Sílvia Martín; Niesen, Bjoern; Ledinsky, Martin; Nicolay, Sylvain; Bailat, Julien; Yum, Jun-Ho; De Wolf, Stefaan; Ballif, Christophe

    2015-01-21

    Tandem solar cells constructed from a crystalline silicon (c-Si) bottom cell and a low-cost top cell offer a promising way to ensure long-term price reductions of photovoltaic modules. We present a four-terminal tandem solar cell consisting of a methyl ammonium lead triiodide (CH3NH3PbI3) top cell and a c-Si heterojunction bottom cell. The CH3NH3PbI3 top cell exhibits broad-band transparency owing to its design free of metallic components and yields a transmittance of >55% in the near-infrared spectral region. This allows the generation of a short-circuit current density of 13.7 mA cm(-2) in the bottom cell. The four-terminal tandem solar cell yields an efficiency of 13.4% (top cell: 6.2%, bottom cell: 7.2%), which is a gain of 1.8%abs with respect to the reference single-junction CH3NH3PbI3 solar cell with metal back contact. We employ the four-terminal tandem solar cell for a detailed investigation of the optical losses and to derive guidelines for further efficiency improvements. Based on a power loss analysis, we estimate that tandem efficiencies of ∼28% are attainable using an optically optimized system based on current technology, whereas a fully optimized, ultimate device with matched current could yield up to 31.6%.

  5. The human crystallin gene families

    Directory of Open Access Journals (Sweden)

    Wistow Graeme

    2012-12-01

    Full Text Available Abstract Crystallins are the abundant, long-lived proteins of the eye lens. The major human crystallins belong to two different superfamilies: the small heat-shock proteins (α-crystallins and the βγ-crystallins. During evolution, other proteins have sometimes been recruited as crystallins to modify the properties of the lens. In the developing human lens, the enzyme betaine-homocysteine methyltransferase serves such a role. Evolutionary modification has also resulted in loss of expression of some human crystallin genes or of specific splice forms. Crystallin organization is essential for lens transparency and mutations; even minor changes to surface residues can cause cataract and loss of vision.

  6. Substate and evaporation rate dependent orientation and crystalline organization of sexithiophene films vacuum deposited onto Au and HOPG

    Science.gov (United States)

    El Ardhaoui, M.; Lang, P.; Garnier, F.; Roger, J. P.

    1998-06-01

    The orientation and the crystalline organization of the films depend largely on the nature of the substrate and the deposition rate. The substrate effect is related to its interactions with the oligomers and also to the molecular mobility at the surface. It depends also largely on the deposition rate. L'orientation et l'organisation structurale des films de sexithiophène évaporés sous vide sont fortement liées à la nature du substrat (Au, HOPG) et à la vitesse de dépôt. L'effet du substrat est lié aux interactions avec les oligomères ainsi qu'à la mobilité de ces derniers sur la surface. Cet effet dépend largement de la vitesse d'évaporation.

  7. Origin of Meyer-Neldel type compensation behavior in organic semiconductors at large carrier concentrations: Disorder versus thermodynamic description

    Science.gov (United States)

    Fishchuk, I. I.; Kadashchuk, A.; Mityashin, A.; Gavrilyuk, M. M.; Köhler, A.; Bässler, H.; Genoe, J.; Sitter, H.; Sariciftci, N. S.

    2014-12-01

    We have extended an effective medium approximation theory [Fishchuk, Kadashchuk, Genoe, Ullah, Sitter, Singh, Sariciftci, and Bässler, Phys. Rev. B 81, 045202 (2010), 10.1103/PhysRevB.81.045202] to investigate how polaron formation affects the Meyer-Neldel (MN) compensation behavior observed for temperature-dependent charge-carrier transport in disordered organic semiconductors at large carrier concentrations, as realized in organic field-effect transistors (OFETs). We show that the compensation behavior in organic semiconductor thin films can be consistently described for both nonpolaronic and polaronic hopping transport in the framework of the disorder formalism using either Miller-Abrahams or polaron Marcus rates, respectively, provided that the polaron binding energy is small compared to the width of the density of states (DOS) distribution in the system. We argue that alternative models based on thermodynamic reasoning, like the multiexcitation entropy (MEE) model, which assumes charge transport dominated by polarons with multiphonon processes and ignores the energy disorder, are inherently not applicable to describe adequately the charge-carrier transport in disordered organic semiconductors. We have suggested and realized a test experiment based on measurements of the compensation behavior for the temperature-dependent conductivity and mobility in OFET devices to check the applicability of these models. We point out that the MN behavior observed in thin-film OFETs has nothing to do with the genuine MN rule predicted by the MEE approach, but rather it is an apparent effect arising as a consequence of the functional dependence of the partial filling of the DOS in a disordered system with hopping transport. This fact is fully supported by experimental results. The apparent MN energy was found to depend also on the shape of the DOS distribution and polaron binding energy.

  8. Impact of Molecular Orientation and Packing Density on Electronic Polarization in the Bulk and at Surfaces of Organic Semiconductors

    KAUST Repository

    Ryno, Sean M.

    2016-05-16

    The polarizable environment surrounding charge carriers in organic semiconductors impacts the efficiency of the charge transport process. Here, we consider two representative organic semiconductors, tetracene and rubrene, and evaluate their polarization energies in the bulk and at the organic-vacuum interface using a polarizable force field that accounts for induced-dipole and quadrupole interactions. Though both oligoacenes pack in a herringbone motif, the tetraphenyl substituents on the tetracene backbone of rubrene alter greatly the nature of the packing. The resulting change in relative orientations of neighboring molecules is found to reduce the bulk polarization energy of holes in rubrene by some 0.3 eV when compared to tetracene. The consideration of model organic-vacuum interfaces highlights the significant variation in the electrostatic environment for a charge carrier at a surface although the net change in polarization energy is small; interestingly, the environment of a charge even just one layer removed from the surface can be viewed already as representative of the bulk. Overall, it is found that in these herringbone-type layered crystals the polarization energy has a much stronger dependence on the intralayer packing density than interlayer packing density.

  9. Impact of Molecular Orientation and Packing Density on Electronic Polarization in the Bulk and at Surfaces of Organic Semiconductors.

    Science.gov (United States)

    Ryno, Sean M; Risko, Chad; Brédas, Jean-Luc

    2016-06-08

    The polarizable environment surrounding charge carriers in organic semiconductors impacts the efficiency of the charge transport process. Here, we consider two representative organic semiconductors, tetracene and rubrene, and evaluate their polarization energies in the bulk and at the organic-vacuum interface using a polarizable force field that accounts for induced-dipole and quadrupole interactions. Though both oligoacenes pack in a herringbone motif, the tetraphenyl substituents on the tetracene backbone of rubrene alter greatly the nature of the packing. The resulting change in relative orientations of neighboring molecules is found to reduce the bulk polarization energy of holes in rubrene by some 0.3 eV when compared to tetracene. The consideration of model organic-vacuum interfaces highlights the significant variation in the electrostatic environment for a charge carrier at a surface although the net change in polarization energy is small; interestingly, the environment of a charge even just one layer removed from the surface can be viewed already as representative of the bulk. Overall, it is found that in these herringbone-type layered crystals the polarization energy has a much stronger dependence on the intralayer packing density than interlayer packing density.

  10. Application of semiconductor photocatalysis for organic synthesis: from photons to the process

    NARCIS (Netherlands)

    Leite Pimenta Carneiro, J. T.

    2010-01-01

    In photocatalysis light drives the reactions. When a semiconductor, such as titania, is exposed to light of a specific wavelength range, several physical processes occur and chemical reactions can take place at its surface in the presence of a reactant. This technology works well for wastewater and

  11. pH sensitivity of Si-C linked organic monolayers on crystalline silicon surfaces

    NARCIS (Netherlands)

    Faber, Erik Jouwert; Sparreboom, Wouter; Groeneveld, Wilrike; de Smet, Louis C.P.M.; Bomer, Johan G.; Olthuis, Wouter; Zuilhof, Han; Sudholter, Ernst; Sudhölter, Ernst J.R.; Bergveld, Piet; van den Berg, Albert

    2007-01-01

    The electrochemical behaviour of Si-C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiomeric biosensors, to gain fundamental knowledge on the behaviour of such Si electrodes under practical conditions. This is done via

  12. Problems of linear electron (polaron) transport theory in semiconductors

    CERN Document Server

    Klinger, M I

    1979-01-01

    Problems of Linear Electron (Polaron) Transport Theory in Semiconductors summarizes and discusses the development of areas in electron transport theory in semiconductors, with emphasis on the fundamental aspects of the theory and the essential physical nature of the transport processes. The book is organized into three parts. Part I focuses on some general topics in the theory of transport phenomena: the general dynamical theory of linear transport in dissipative systems (Kubo formulae) and the phenomenological theory. Part II deals with the theory of polaron transport in a crystalline semicon

  13. Functionalization of Organic Semiconductors and Other Carbon-based Materials by Self-Assembled Monolayers (SAMs) and Charge Transport in Organic Field-effect Transistors (OFETs)

    Science.gov (United States)

    Lee, Bumsu

    In the first part of the thesis, studies of the charge carrier transport in organic semiconductors performed using organic field-effect transistors (OFETs) with polymeric gate dielectric (parylene) are presented. By combining OFET and ultraviolet photoelectron spectroscopy (UPS) studies, the effect of bias-stress instability at the semiconductor/insulator interface have been investigated and understood. The effect is understood in terms of the transfer of holes from an accumulation channel of the semiconductor to localized states of the insulator that depends on energetic overlap between HOMO band tails of the semiconductor and the insulator. Second, surface functionalization of various materials such as organic single crystals, conjugated semiconductor polymers, graphene and carbon nanotubes (CNTs) with Self-Assembled Monolayers (SAMs) is described. In most cases, an enhanced surface conductivity is observed as a result of SAM treatment. Especially, fluorinated alkyl-silane (FTS) SAM induces the highest density of p-type charge carriers (in excess of an order of 1013cm-2), which leads to a strong surface hole-doping of these materials. In this thesis, (1) the mechanism of SAM nucleation, growth process and doping effect at the surface of organic single crystals and graphene is revealed. SAM nucleation occurs predominantly at molecular step edges or defect sites present at the surface and a consecutive lateral growth proceeds by cross-linking between SAM molecules. The strong hole-doping is explained by an interfacial charge transfer that during SAM formation. In addition, conductive atomic force microscopy (C-AFM) confirms that conducting paths along the step edges are formed by FTS nucleation at the early stage of FTS growth on rubrene. (2) it is reported that conductivity of solution-deposited thin film of conjugated polymers increases by up to six orders of magnitude, reaching (1.1 ± 0.1) × 103 Scm-1 for poly (2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b

  14. Density Functional Theory Simulations of Semiconductors for Photovoltaic Applications: Hybrid Organic-Inorganic Perovskites and III/V Heterostructures

    Directory of Open Access Journals (Sweden)

    Jacky Even

    2014-01-01

    Full Text Available Potentialities of density functional theory (DFT based methodologies are explored for photovoltaic materials through the modeling of the structural and optoelectronic properties of semiconductor hybrid organic-inorganic perovskites and GaAs/GaP heterostructures. They show how the properties of these bulk materials, as well as atomistic relaxations, interfaces, and electronic band-lineups in small heterostructures, can be thoroughly investigated. Some limitations of available standard DFT codes are discussed. Recent improvements able to treat many-body effects or based on density-functional perturbation theory are also reviewed in the context of issues relevant to photovoltaic technologies.

  15. Effect of Electron-Beam Irradiation on Organic Semiconductor and Its Application for Transistor-Based Dosimeters.

    Science.gov (United States)

    Kim, Jae Joon; Ha, Jun Mok; Lee, Hyeok Moo; Raza, Hamid Saeed; Park, Ji Won; Cho, Sung Oh

    2016-08-03

    The effects of electron-beam irradiation on the organic semiconductor rubrene and its application as a dosimeter was investigated. Through the measurements of photoluminescence and the ultraviolet photoelectron spectroscopy, we found that electron-beam irradiation induces n-doping of rubrene. Additionally, we fabricated rubrene thin-film transistors with pristine and irradiated rubrene, and discovered that the decrease in transistor properties originated from the irradiation of rubrene and that the threshold voltages are shifted to the opposite directions as the irradiated layers. Finally, a highly sensitive and air-stable electron dosimeter was fabricated based on a rubrene transistor.

  16. Effect of mixed layer crystallinity on the performance of mixed heterojunction organic photovoltaic cells.

    Science.gov (United States)

    Song, Byeongseop; Rolin, Cedric; Zimmerman, Jeramy D; Forrest, Stephen R

    2014-05-01

    Organic vapor-phase deposition (OVPD) is used to grow tetraphenyldibenzoperiflanthen (DBP):C70 mixed heterojunction photovoltaic devices. Compared with vacuum thermal evaporation (VTE), the OVPD-grown film develops nanocrystalline domains of C70. Optimized OVPD-grown OPVs have a 61% fill factor for a 100 nm active layer thickness, whereas VTE-grown devices have a 47% fill factor at the same thickness.

  17. New highly fluorescent biolabels based on II VI semiconductor hybrid organic inorganic nanostructures for bioimaging

    Science.gov (United States)

    Santos, B. S.; Farias, P. M. A.; Menezes, F. D.; Brasil, A. G., Jr.; Fontes, A.; Romão, L.; Amaral, J. O.; Moura-Neto, V.; Tenório, D. P. L. A.; Cesar, C. L.; Barbosa, L. C.; Ferreira, R.

    2008-11-01

    Semiconductor quantum dots based on II-VI materials may be prepared to develop good biolabeling properties. In this study we present some well-succeeded results related to the preparation, functionalization and bioconjugation of CdY (Y = S, Se and Te) to biological systems (live cells and fixed tissues). These nanostructured materials were prepared using colloidal synthesis in aqueous media resulting nanoparticles with very good optical properties and an excellent resistance to photodegradation.

  18. Application of semiconductor photocatalysis for organic synthesis: from photons to the process

    OpenAIRE

    Leite Pimenta Carneiro, J. T.

    2010-01-01

    In photocatalysis light drives the reactions. When a semiconductor, such as titania, is exposed to light of a specific wavelength range, several physical processes occur and chemical reactions can take place at its surface in the presence of a reactant. This technology works well for wastewater and air cleaning applications. In these, trace hazardous compounds present in water and air are converted (i.e. completely oxidized) to harmless ones such as carbon dioxide and water. A novel area wher...

  19. Direct On-Surface Patterning of a Crystalline Laminar Covalent Organic Framework Synthesized at Room Temperature.

    Science.gov (United States)

    de la Peña Ruigómez, Alejandro; Rodríguez-San-Miguel, David; Stylianou, Kyriakos C; Cavallini, Massimiliano; Gentili, Denis; Liscio, Fabiola; Milita, Silvia; Roscioni, Otello Maria; Ruiz-González, Maria Luisa; Carbonell, Carlos; Maspoch, Daniel; Mas-Ballesté, Rubén; Segura, José Luis; Zamora, Félix

    2015-07-20

    We report herein an efficient, fast, and simple synthesis of an imine-based covalent organic framework (COF) at room temperature (hereafter, RT-COF-1). RT-COF-1 shows a layered hexagonal structure exhibiting channels, is robust, and is porous to N2 and CO2 . The room-temperature synthesis has enabled us to fabricate and position low-cost micro- and submicropatterns of RT-COF-1 on several surfaces, including solid SiO2 substrates and flexible acetate paper, by using lithographically controlled wetting and conventional ink-jet printing.

  20. Dielectric properties of crystalline organic molecular films in the limit of zero overlap

    Energy Technology Data Exchange (ETDEWEB)

    D’Avino, Gabriele, E-mail: gabriele.davino@gmail.com [Laboratory for Chemistry of Novel Materials, University of Mons, Place du Parc 20, BE-7000 Mons, Belgium and Department of Physics, University of Liège, Allée du 6 Août 17, BE-4000 Liège (Belgium); Vanzo, Davide; Soos, Zoltán G., E-mail: soos@princeton.edu [Department of Chemistry, Princeton University, Princeton, New Jersey 08544 (United States)

    2016-01-21

    We present the calculation of the static dielectric susceptibility tensor and dipole field sums in thin molecular films in the well-defined limit of zero intermolecular overlap. Microelectrostatic and charge redistribution approaches are applied to study the evolution of dielectric properties from one to a few molecular layers in films of different conjugated molecules with organic electronics applications. Because of the conditional convergence of dipolar interactions, dipole fields depend on the shape of the sample and different values are found in the middle layer of a thick film and in the bulk. The shape dependence is eliminated when depolarization is taken into account, and the dielectric tensor of molecular films converges to the bulk limit within a few molecular layers. We quantify the magnitude of surface effects and interpret general trends among different systems in terms of molecular properties, such as shape, polarizability anisotropy, and supramolecular organization. A connection between atomistic models for molecular dielectrics and simpler theories for polarizable atomic lattices is also provided.

  1. Structural study and fluorescent property of a novel organic microporous crystalline material

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Zhao; Yang, Bingqin; Yang, Meipan; Zhang, Binglin, E-mail: yangbq@nwu.edu.cn [Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of Ministry of Education, College of Chemistry and Materials Science, Northwest University (China)

    2014-01-15

    A novel microporous organic material [(2-{2-[2-(bis-methoxycarbonylmethylamino)phenoxy] ethoxy}-4-benzimidazole-phenyl)methoxycarbonylmethylamino]acetic acid methyl ester 6 was synthesized and characterized by single crystal X-ray diffraction, Fourier transform infrared spectroscopy (FT-IR), electron spray ionization-mass spectrometry (ESI-HRMS), X-ray powder diffraction (PXRD), {sup 1}H and {sup 13}C NMR. 6 crystallizes in the centrosymmetric monoclinic space group C2/c, with unit cell parameters a = 35.648(3) Å, b = 14.3240(12) Å, c = 15.3693(13) Å, a = 90.00, ß = 94.8190(10), γ = 90.00, V = 7820.16 Å{sup 3} and Z = 8 at 296(2) K. As indicated by crystal packing, the molecular conjugation planes arrange along the c axis to form micropores due to the hydrogen bonds. In addition, the fluorescent spectrum and luminescence lifetime were studied for 6. (author)

  2. The role of synchrotron radiation in examining the self-assembly of crystalline nanoporous framework materials: from zeolites and aluminophosphates to metal organic hybrids

    NARCIS (Netherlands)

    O'Brien, M.G.; Beale, A.M.; Weckhuysen, B.M.

    2013-01-01

    This tutorial review describes the role of synchrotron-based techniques in the study of the formation of Crystalline Nanoporous Framework Materials (CNFMs), such as zeolites, aluminophosphates (AlPOs) and metal organic frameworks (MOFs). Initially, a general formation process for CNFMs is described

  3. Role of band states and trap states in the charge transport properties of organic semiconductors (Conference Presentation)

    Science.gov (United States)

    Coropceanu, Veaceslav

    2016-11-01

    In this contribution, we examine the main factors that define charge transport in organic semiconductors. We consider both crystals based on a single molecule building block, such as oligoacenes, and two-component donor-acceptor crystals in which one component acts as an electron donor and the other as an acceptor. We will first discuss the state-of-the-art methodologies used in the derivation of the microscopic parameters (electron-vibration couplings, transfer integrals, band gaps, bandwidths, and effective masses) describing charge transport. In particular, we will discuss the impact that the amount of nonlocal Hartree-Fock exchange included in a hybrid density functional has on these parameters. In order to understand the role of disorder we use a combination of electronic-structure calculations and molecular mechanics/molecular dynamics simulations complemented by ensemble and time average approaches to separate the static and dynamic disorder components. The temperature dependence of the charge carrier mobility is studied by treating the electron-phonon interaction as a perturbation (Boltzmann theory), in the static approximation (Kubo formalism) and in the framework of mixed quantum/classical dynamics. Finally, based on the results of the kinetic Monte Carlo simulations we will compare the merits of a hopping model and a mobility edge model in the description of the effect of charge-carrier concentration on the electrical conductivity, carrier mobility, and Fermi energy of organic semiconductors.

  4. Organic semiconductor/gold interface interactions: from physisorption on planar surfaces to chemical reactions with metal nanoparticles.

    Science.gov (United States)

    Ligorio, Giovanni; Nardi, Marco Vittorio; Christodoulou, Christos; Koch, Norbert

    2015-08-24

    The interaction of gold nanoparticles (AuNPs) with prototypical organic semiconductors used in optoelectronics, namely, tris(8-hydroxyquinoline)aluminium (Alq3 ) and 4,4-bis[N-(1-naphthyl)-N-phenylamino]diphenyl (α-NPD), is investigated in situ by X-ray photoelectron spectroscopy (XPS). These AuNPs-on-molecule experiments are compared with the reversed molecule-on-Au cases. The molecules-on-Au systems show only weak interactions, and the evolution of the XP spectra is dominated by final-state effects. In contrast, in the AuNPs-on-molecules cases, both initial-state effects and final-state effects occur. Spectral features arising for both molecules and metal indicate charge transfer and the formation of organometallic complexes (initial-state effects). The energy shift in the metal emission underlines the size-induced nanometric nature of the molecule/Au interaction (final-state effects). Consequently, the chemical interaction between metals and organic semiconductors likely depends strongly on the deposition sequence in general.

  5. Facile synthesis of light harvesting semiconductor bismuth oxychloride nano photo-catalysts for efficient removal of hazardous organic pollutants.

    Science.gov (United States)

    Seddigi, Zaki S; Gondal, Mohammed A; Baig, Umair; Ahmed, Saleh A; Abdulaziz, M A; Danish, Ekram Y; Khaled, Mazen M; Lais, Abul

    2017-01-01

    In the present work, bismuth oxychloride nanoparticles-a light harvesting semiconductor photocatalyst-were synthesized by a facile hydrolysis route, with sodium bismuthate and hydroxylammonium chloride as the precursor materials. The as-synthesized semiconductor photocatalysts were characterized using X-ray diffraction analysis, Fourier transform infra-red spectroscopy, Raman spectroscopy, Field emission scanning electron microscopy, X-ray photoelectron spectroscopy and Photoluminescence spectroscopy techniques. The crystal structure, morphology, composition, and optical properties of these facile synthesized bismuth oxychloride nanoparticles (BiOCl NPs) were compared to those of traditional bismuth oxychloride. In addition, the photocatalytic performance of facile-synthesized BiOCl NPs and traditional BiOCl, as applied to the removal of hazardous organic dyes under visible light illumination, is thoroughly investigated. Our results reveal that facile-synthesized BiOCl NPs display strong UV-Vis light adsorption, improved charge carrier mobility and an inhibited rate of charge carrier recombination, when compared to traditional BiOCl. These enhancements result in an improved photocatalytic degradation rate of hazardous organic dyes under UV-Vis irradiance. For instance, the facile-synthesized BiOCl NPs attained 100% degradation of methylene blue and methyl orange dyes in approximately 30 mins under UV-Vis irradiation, against 55% degradation for traditional BiOCl under similar experimental conditions.

  6. Facile synthesis of light harvesting semiconductor bismuth oxychloride nano photo-catalysts for efficient removal of hazardous organic pollutants

    Science.gov (United States)

    Seddigi, Zaki S.; Baig, Umair; Ahmed, Saleh A.; Abdulaziz, M. A.; Danish, Ekram Y.; Khaled, Mazen M.; Lais, Abul

    2017-01-01

    In the present work, bismuth oxychloride nanoparticles–a light harvesting semiconductor photocatalyst–were synthesized by a facile hydrolysis route, with sodium bismuthate and hydroxylammonium chloride as the precursor materials. The as-synthesized semiconductor photocatalysts were characterized using X-ray diffraction analysis, Fourier transform infra-red spectroscopy, Raman spectroscopy, Field emission scanning electron microscopy, X-ray photoelectron spectroscopy and Photoluminescence spectroscopy techniques. The crystal structure, morphology, composition, and optical properties of these facile synthesized bismuth oxychloride nanoparticles (BiOCl NPs) were compared to those of traditional bismuth oxychloride. In addition, the photocatalytic performance of facile-synthesized BiOCl NPs and traditional BiOCl, as applied to the removal of hazardous organic dyes under visible light illumination, is thoroughly investigated. Our results reveal that facile-synthesized BiOCl NPs display strong UV-Vis light adsorption, improved charge carrier mobility and an inhibited rate of charge carrier recombination, when compared to traditional BiOCl. These enhancements result in an improved photocatalytic degradation rate of hazardous organic dyes under UV-Vis irradiance. For instance, the facile-synthesized BiOCl NPs attained 100% degradation of methylene blue and methyl orange dyes in approximately 30 mins under UV-Vis irradiation, against 55% degradation for traditional BiOCl under similar experimental conditions. PMID:28245225

  7. Tailored surface-enhanced Raman nanopillar arrays fabricated by laser-assisted replication for biomolecular detection using organic semiconductor lasers.

    Science.gov (United States)

    Liu, Xin; Lebedkin, Sergei; Besser, Heino; Pfleging, Wilhelm; Prinz, Stephan; Wissmann, Markus; Schwab, Patrick M; Nazarenko, Irina; Guttmann, Markus; Kappes, Manfred M; Lemmer, Uli

    2015-01-27

    Organic semiconductor distributed feedback (DFB) lasers are of interest as external or chip-integrated excitation sources in the visible spectral range for miniaturized Raman-on-chip biomolecular detection systems. However, the inherently limited excitation power of such lasers as well as oftentimes low analyte concentrations requires efficient Raman detection schemes. We present an approach using surface-enhanced Raman scattering (SERS) substrates, which has the potential to significantly improve the sensitivity of on-chip Raman detection systems. Instead of lithographically fabricated Au/Ag-coated periodic nanostructures on Si/SiO2 wafers, which can provide large SERS enhancements but are expensive and time-consuming to fabricate, we use low-cost and large-area SERS substrates made via laser-assisted nanoreplication. These substrates comprise gold-coated cyclic olefin copolymer (COC) nanopillar arrays, which show an estimated SERS enhancement factor of up to ∼ 10(7). The effect of the nanopillar diameter (60-260 nm) and interpillar spacing (10-190 nm) on the local electromagnetic field enhancement is studied by finite-difference-time-domain (FDTD) modeling. The favorable SERS detection capability of this setup is verified by using rhodamine 6G and adenosine as analytes and an organic semiconductor DFB laser with an emission wavelength of 631.4 nm as the external fiber-coupled excitation source.

  8. Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells.

    Science.gov (United States)

    Yang, Yankang; Zhang, Zhi-Guo; Bin, Haijun; Chen, Shanshan; Gao, Liang; Xue, Lingwei; Yang, Changduk; Li, Yongfang

    2016-11-16

    Low bandgap n-type organic semiconductor (n-OS) ITIC has attracted great attention for the application as an acceptor with medium bandgap p-type conjugated polymer as donor in nonfullerene polymer solar cells (PSCs) because of its attractive photovoltaic performance. Here we report a modification on the molecular structure of ITIC by side-chain isomerization with meta-alkyl-phenyl substitution, m-ITIC, to further improve its photovoltaic performance. In a comparison with its isomeric counterpart ITIC with para-alkyl-phenyl substitution, m-ITIC shows a higher film absorption coefficient, a larger crystalline coherence, and higher electron mobility. These inherent advantages of m-ITIC resulted in a higher power conversion efficiency (PCE) of 11.77% for the nonfullerene PSCs with m-ITIC as acceptor and a medium bandgap polymer J61 as donor, which is significantly improved over that (10.57%) of the corresponding devices with ITIC as acceptor. To the best of our knowledge, the PCE of 11.77% is one of the highest values reported in the literature to date for nonfullerene PSCs. More importantly, the m-ITIC-based device shows less thickness-dependent photovoltaic behavior than ITIC-based devices in the active-layer thickness range of 80-360 nm, which is beneficial for large area device fabrication. These results indicate that m-ITIC is a promising low bandgap n-OS for the application as an acceptor in PSCs, and the side-chain isomerization could be an easy and convenient way to further improve the photovoltaic performance of the donor and acceptor materials for high efficiency PSCs.

  9. Organic semiconductors. Fundamental aspects of metal contacts, highly ordered films and the application in field effect transistors; Organische Halbleiter. Fundamentale Aspekte von Metallkontakten, hochgeordneten Schichten und deren Anwendung in Feldeffekttransistoren

    Energy Technology Data Exchange (ETDEWEB)

    Sachs, Soenke

    2010-05-31

    In this thesis, fundamental aspects of organic semiconductor devices are investigated and incorporated into the construction and optimization of an organic semiconductor field effect transistor (OFET). In order to approach the ''high end'' of OFETs, elaborate steps to optimize the devices are taken, despite the fact that they might not be feasible in a direct application. Well-characterized model systems are selected to study fundamental properties of devices, in particular the electronic structure at molecule/metal contacts and in the organic semiconductor bulk, as well as the growth of organic semiconductor molecules on single crystalline insulator substrates. The realization of a high performance OFET is pursued by a comprehensive approach in order to optimize particularly the interfaces of the device. Considerable progress is made towards a working OFET with best possible properties. A primary focus of this work, the investigation of the electronic structure at molecule/metal contacts and in the molecular bulk of the model system PTCDA/Ag(111) is performed using two photon photoelectron spectroscopy (2PPE). Of special interest is the excitation of the lowest unoccupied molecular orbital (LUMO) that shows different energetic relaxation mechanisms, depending on the origin of excitation. In addition to the importance of the molecule/metal contacts, the performance of OFETs is determined to a large extend by the quality of the organic semiconductor/gate insulator interface where the charge carrier channel is established. The morphology and structure of a molecular layer are investigated for diindenoperylene (DIP) molecules, adsorbed on a single crystalline Al{sub 2}O{sub 3} substrate, by atomic force microscopy and optical microscopy. Dependent on the substrate temperature during growth, the morphology shows grains with lateral dimensions of about 200 nm at 350 K which increase up to 700 nm at 450 K. This change in morphology is accompanied by

  10. A metrology perspective on the dark injection transient current method for charge mobility determination in organic semiconductors

    Science.gov (United States)

    Esward, T.; Knox, S.; Jones, H.; Brewer, P.; Murphy, C.; Wright, L.; Williams, J.

    2011-05-01

    Charge mobility is a key parameter for understanding the performance of organic semiconductor devices and materials. A range of techniques is available that can measure charge mobility with varying accuracy and precision. In this paper we analyze the dark injection transient current (DITC) method from a metrology perspective. We carried out a systematic study of the sensitivity of single carrier analogues of organic light-emitting diodes (OLEDs) to small changes in electrical input and environmental conditions. We observed that the experimental results depend strongly on the previous history of the device under test, with both long term and short term effects in evidence. Our findings demonstrate the need for caution in interpreting the results of single experiments to determine the charge mobility of OLEDs and the difficulty of associating uncertainty statements with the results of charge mobility measurements.

  11. Fluorosurfactant-assisted photolithography for patterning of perfluoropolymers and solution-processed organic semiconductors for printed displays

    Science.gov (United States)

    Sakanoue, Tomo; Mizukami, Makoto; Oku, Shinya; Yoshimura, Yudai; Abiko, Miho; Tokito, Shizuo

    2014-10-01

    A photolithographic patterning technique of perfluoropolymers was developed for the micropatterning of solution-processed organic semiconductors. We found that a small amount of fluorosurfactant additives in photoresist solutions enabled preparation of the spin-coated films even on the dewetting surfaces of perfluoropolymers. Subsequent photolithography and dry/wet etching achieved excellent patterning of perfluoropolymers, which provided a high contrast of wettability in microscale on the substrate. The dewetting patterns were applied for isolating solution-processed organic thin-film transistor arrays for a 100 ppi active-matrix display by selective dewetting. The isolation of the semiconducting layers achieved significant improvement in the current on/off ratio with a high mobility of >1 cm2 V-1 s-1.

  12. Exposure to Volatile Organic Compounds and Possibility of Exposure to By-product Volatile Organic Compounds in Photolithography Processes in Semiconductor Manufacturing Factories.

    Science.gov (United States)

    Park, Seung-Hyun; Shin, Jung-Ah; Park, Hyun-Hee; Yi, Gwang Yong; Chung, Kwang-Jae; Park, Hae-Dong; Kim, Kab-Bae; Lee, In-Seop

    2011-09-01

    The purpose of this study was to measure the concentration of volatile organic compound (VOC)s originated from the chemicals used and/or derived from the original parental chemicals in the photolithography processes of semiconductor manufacturing factories. A total of four photolithography processes in 4 Fabs at three different semiconductor manufacturing factories in Korea were selected for this study. This study investigated the types of chemicals used and generated during the photolithography process of each Fab, and the concentration levels of VOCs for each Fab. A variety of organic compounds such as ketone, alcohol, and acetate compounds as well as aromatic compounds were used as solvents and developing agents in the processes. Also, the generation of by-products, such as toluene and phenol, was identified through a thermal decomposition experiment performed on a photoresist. The VOC concentration levels in the processes were lower than 5% of the threshold limit value (TLV)s. However, the air contaminated with chemical substances generated during the processes was re-circulated through the ventilation system, thereby affecting the airborne VOC concentrations in the photolithography processes. Tens of organic compounds were being used in the photolithography processes, though the types of chemical used varied with the factory. Also, by-products, such as aromatic compounds, could be generated during photoresist patterning by exposure to light. Although the airborne VOC concentrations resulting from the processes were lower than 5% of the TLVs, employees still could be exposed directly or indirectly to various types of VOCs.

  13. Resonance energy transfer in conjugates of semiconductor nanocrystals and organic dye molecules

    Science.gov (United States)

    Artemyev, Mikhail

    2012-01-01

    I analyze the efficiency of Förster resonance energy transfer (FRET) in luminescent donor-acceptor complexes based on conjugates of CdSe/ZnS quantum dots and nanorods and the luminescent dyes. Semiconductor nanocrystals serve either as FRET donors or acceptors. Experimentally observed reduced FRET efficiency in complexes of nanorods and dye molecules as compared to quantum dots are found to be attributable to a distance-limited energy transfer rate in case of point-like dye dipoles and extended nanorod dipole.

  14. Investigations on Substrate Temperature-Induced Growth Modes of Organic Semiconductors at Dielectric/semiconductor Interface and Their Correlation with Threshold Voltage Stability in Organic Field-Effect Transistors.

    Science.gov (United States)

    Padma, Narayanan; Maheshwari, Priya; Bhattacharya, Debarati; Tokas, Raj B; Sen, Shashwati; Honda, Yoshihide; Basu, Saibal; Pujari, Pradeep Kumar; Rao, T V Chandrasekhar

    2016-02-10

    Influence of substrate temperature on growth modes of copper phthalocyanine (CuPc) thin films at the dielectric/semiconductor interface in organic field effect transistors (OFETs) is investigated. Atomic force microscopy (AFM) imaging at the interface reveals a change from 'layer+island' to "island" growth mode with increasing substrate temperatures, further confirmed by probing the buried interfaces using X-ray reflectivity (XRR) and positron annihilation spectroscopic (PAS) techniques. PAS depth profiling provides insight into the details of molecular ordering while positron lifetime measurements reveal the difference in packing modes of CuPc molecules at the interface. XRR measurements show systematic increase in interface width and electron density correlating well with the change from layer + island to coalesced huge 3D islands at higher substrate temperatures. Study demonstrates the usefulness of XRR and PAS techniques to study growth modes at buried interfaces and reveals the influence of growth modes of semiconductor at the interface on hole and electron trap concentrations individually, thereby affecting hysteresis and threshold voltage stability. Minimum hole trapping is correlated to near layer by layer formation close to the interface at 100 °C and maximum to the island formation with large voids between the grains at 225 °C.

  15. Calculation of the Standard Molal Thermodynamic Properties of Crystalline, Liquid, and Gas Organic Molecules at High Temperatures and Pressures

    Science.gov (United States)

    Helgeson, Harold C.; Owens, Christine E.; Knox, Annette M.; Richard, Laurent

    1998-03-01

    Calculation of the thermodynamic properties of organic solids, liquids, and gases at high temperatures and pressures is a requisite for characterizing hydrothermal metastable equilibrium states involving these species and quantifying the chemical affinities of irreversible reactions of organic molecules in natural gas, crude oil, kerogen, and coal with minerals and organic, inorganic, and biomolecular aqueous species in interstitial waters in sedimentary basins. To facilitate calculations of this kind, coefficients for the Parameters From Group Contributions (PFGC) equation of state have been compiled for a variety of groups in organic liquids and gases. In addition, molecular weights, critical temperatures and pressures, densities at 25°C and 1 bar, transition, melting, and boiling temperatures ( Tt,Pr, Tm,Pr, and Tv,Pr, respectively) and standard molal enthalpies of transition (Δ H° t,Pr), melting (Δ H° m,Pr), and vaporization (Δ H° v,Pr) of organic species at 1 bar ( Pr) have been tabulated, together with an internally consistent and comprehensive set of standard molal Gibbs free energies and enthalpies of formation from the elements in their stable state at 298.15 K ( Tr) and Pr (Δ G° f and Δ H° f, respectively). The critical compilation also includes standard molal entropies ( S°) and volumes ( V°) at Tr and Pr, and standard molal heat capacity power function coefficients to compute the standard molal thermodynamic properties of organic solids, liquids, and gases as a function of temperature at 1 bar. These properties and coefficients have been tabulated for more than 500 crystalline solids, liquids, and gases, and those for many more can be computed from the equations of state group additivity algorithms. The crystalline species correspond to normal alkanes (C nH 2( n+1) ) with carbon numbers ( n, which is equal to the number of moles of carbon atoms in one mole of the species) ranging from 5 to 100, and 23 amino acids including glycine (C 2H 5NO

  16. Growth mechanism of single-crystalline NiO thin films grown by metal organic chemical vapor deposition

    Science.gov (United States)

    Roffi, Teuku Muhammad; Nozaki, Shinji; Uchida, Kazuo

    2016-10-01

    Nickel oxide (NiO) thin films were grown by atmospheric-pressure metal organic chemical vapor deposition (APMOCVD). Growth was carried out using various growth parameters, including the growth temperature, the input precursor (O2/Ni) ratio, and the type of substrate material. Effects of the growth parameters on the structural and electrical properties of the films were investigated. X-ray diffraction analysis revealed that the crystal structure and quality were strongly affected by the growth temperature and the type of substrate material. At an optimized growth temperature, single-crystalline NiO films were grown on MgO(100) and MgO(111) substrates in a cube-on-cube orientation relationship, while on an Al2O3(001) substrate, the film was grown in the NiO[111] direction. The use of MgO substrates successfully suppressed the formation of twin defects, which have been frequently reported in the growth of NiO. The difference in the formation of the twin defects on MgO and Al2O3 substrates was discussed. It was observed that the resistivity dependence on crystal quality was affected by the choice of substrate material. The effects of the precursor ratio on the transmittance and resistivity of the films were also investigated. Improved transparency in the visible wavelength region and higher conductivity were found in films grown with higher O2/Ni ratios.

  17. Locking covalent organic frameworks with hydrogen bonds: general and remarkable effects on crystalline structure, physical properties, and photochemical activity.

    Science.gov (United States)

    Chen, Xiong; Addicoat, Matthew; Jin, Enquan; Zhai, Lipeng; Xu, Hong; Huang, Ning; Guo, Zhaoqi; Liu, Lili; Irle, Stephan; Jiang, Donglin

    2015-03-11

    A series of two-dimensional covalent organic frameworks (2D COFs) locked with intralayer hydrogen-bonding (H-bonding) interactions were synthesized. The H-bonding interaction sites were located on the edge units of the imine-linked tetragonal porphyrin COFs, and the contents of the H-bonding sites in the COFs were synthetically tuned using a three-component condensation system. The intralayer H-bonding interactions suppress the torsion of the edge units and lock the tetragonal sheets in a planar conformation. This planarization enhances the interlayer interactions and triggers extended π-cloud delocalization over the 2D sheets. Upon AA stacking, the resulting COFs with layered 2D sheets amplify these effects and strongly affect the physical properties of the material, including improving their crystallinity, enhancing their porosity, increasing their light-harvesting capability, reducing their band gap, and enhancing their photocatalytic activity toward the generation of singlet oxygen. These remarkable effects on the structure and properties of the material were observed for both freebase and metalloporphyin COFs. These results imply that exploration of supramolecular ensembles would open a new approach to the structural and functional design of COFs.

  18. Effects of neutral particle beam on nano-crystalline silicon thin films, with application to thin film transistor backplane for flexible active matrix organic light emitting diodes

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Jin Nyoung; Song, Byoung Chul; Lee, Dong Hyeok [Dept. of Display and Semiconductor Physics, Korea University, Chungnam (Korea, Republic of); Yoo, Suk Jae; Lee, Bonju [National Fusion Research Institute, 52, Yuseong-Gu, Deajeon, 305-333 (Korea, Republic of); Hong, MunPyo, E-mail: goodmoon@korea.ac.kr [Dept. of Display and Semiconductor Physics, Korea University, Chungnam (Korea, Republic of)

    2011-08-01

    A novel deposition process for nano-crystalline silicon (nc-Si) thin films was developed using neutral beam assisted chemical vapor deposition (NBaCVD) technology for the application of the thin film transistor (TFT) backplane of flexible active matrix organic light emitting diode (AMOLED). During the formation of a nc-Si thin film, the energetic particles enhance nano-sized crystalline rather microcrystalline Si in thin films. Neutral Particle Beam (NPB) affects the crystallinity in two ways: (1) NPB energy enhances nano-crystallinity through kinetic energy transfer and chemical annealing, and (2) heavier NPB (such as Ar) induces damage and amorphization through energetic particle impinging. Nc-Si thin film properties effectively can be changed by the reflector bias. As increase of NPB energy limits growing the crystalline, the performance of TFT supports this NPB behavior. The results of nc-Si TFT by NBaCVD demonstrate the technical potentials of neutral beam based processes for achieving high stability and reduced leakage in TFT backplanes for AMOLEDs.

  19. Facile synthesis and enhanced photocatalytic activity of single-crystalline nanohybrids for the removal of organic pollutants

    Science.gov (United States)

    Pervaiz, Erum; Liu, Honghong; Yang, Minghui

    2017-03-01

    This study focused on the synthesis of α-MoO3/rGO (rGO, reduced graphene oxide). One-dimensional nanohybrids under mild conditions and a low temperature wet chemical route produced highly pure single-crystalline orthorhombic α-MoO3 on GO sheets. Four nanohybrids, labeled as GMO-0, GMO-1, GMO-2 and GMO-3, were synthesized with different mass chargings of GO (0 mg, 40 mg, 60 mg and 100 mg, respectively). The photocatalytic performance for reduction of organic pollutants was analyzed. The presence of different amounts of GO in the prepared metal oxide hybrids altered the performance of the material as elaborated by the Brunauer-Emmett-Teller surface area, UV-visible diffuse reflectance spectra and the resulting reduction of organic dyes depicted by photocatalytic experiments. GO as a support material and active co-catalyst decreased the band gap of α-MoO3 (2.82 eV) to lower values (2.51 eV), rendering the prepared hybrids usable for visible-light-induced photocatalysis. The large specific surface area (72 m2 g-1) of the mesoporous α-MoO3/rGO nanohybrid made it an efficient photocatalyst for the elimination of azo dyes. Very fast reduction (100%) of Rhodamine B was observed in a few minutes, while Congo Red was degraded by 76% in 10 min, leading to the formation of stable intermediates that were completely neutralized in 12-14 h under light irradiation. The amount of GO loaded in the samples was limited to a point to achieve better results. After that, increasing the amount of GO decreased the extent of degradation due to the presence of a higher electron acceptor. Photocatalytic experiments revealed the synergistic effect, high selectivity of the prepared nanohybrids and degradation of azo dyes. The kinetics of the degradation reaction were studied and found to follow a pseudo first-order reaction.

  20. The effects of electric and magnetic fields on the current spin polarization and magnetoresistance in a ferromagnetic/organic semiconductor/ferromagnetic (FM/OSC/FM) system

    Institute of Scientific and Technical Information of China (English)

    Wang Yu-Mei; Ren Jun-Feng; Yuan Xiao-Bo; Dou Zhao-Tao; Hu Gui-Chao

    2012-01-01

    From experimental results of spin polarized injection and transport in organic semiconductors (OSCs),we theoretically study the current spin polarization and magnetoresistance under an electric and a magnetic field in a ferromagnetic/organic semiconductor/ferromagnetic (FM/OSC/FM) sandwich structure according to the spin drift-diffusion theory and Ohm's law.From the calculations,it is found that the interfacial current spin polarization is enhanced by several orders of magnitude through tuning the magnetic and electric fields by taking into account the specific characteristics of OSC.Furthermore,the effects of the electric and magnetic fields on the magnetoresistance are also discussed in the sandwich structure.

  1. Synthesis and Properties of Heteroacenes Containing Pyrrole and Thiazine Rings as Promising n-Type Organic Semiconductor Candidates

    Institute of Scientific and Technical Information of China (English)

    HONG,Wei; WEI,Zhongming; XU,Wei; WANG,Quanrui; ZHU,Daoben

    2009-01-01

    PBBTZ (6H-pyrrolo[3,2-b:4,5-b']bis[1,4]benzothiazine) was a p-type semiconductor with high field-effect transistor (FET) performance that we have just reported.Two trifluoromethyl substituted PBBTZ derivatives 3a and 3b were synthesized from facile one-pot condensation.They were characterized by means of 1H NMR,IR,HRMS (EI-TOF) and elemental analysis,furthermore,the crystal structure of 3b was described and discussed.Their optical properties were studied by UV-Vis and fluorescence spectroscopy,electrochemical properties were investigated by cyclic voltammetry (CV),and thermal properties were evaluated by thermal gravimetric analysis (TGA).The energy gaps of 3a and 3b,taken directly from spectroscopic measurements,are as broad as 2.45 and 2.48 eV,leading to bluish green and green photoluminescence.The LUMO and HOMO energy levels are -5.73 and -3.28 eV for 3a,-5.67 and -3.19 eV for 3b,respectively.The low energy levels render them well air-stable,and to be promising n-type semiconductor candidates for use in organic electronics.

  2. Spontaneously formed high-performance charge-transport layers of organic single-crystal semiconductors on precisely synthesized insulating polymers

    Science.gov (United States)

    Makita, Tatsuyuki; Sasaki, Masayuki; Annaka, Tatsuro; Sasaki, Mari; Matsui, Hiroyuki; Mitsui, Chikahiko; Kumagai, Shohei; Watanabe, Shun; Hayakawa, Teruaki; Okamoto, Toshihiro; Takeya, Jun

    2017-04-01

    Charge-transporting semiconductor layers with high carrier mobility and low trap-density, desired for high-performance organic transistors, are spontaneously formed as a result of thermodynamic phase separation from a blend of π-conjugated small molecules and precisely synthesized insulating polymers dissolved in an aromatic solvent. A crystal film grows continuously to the size of centimeters, with the critical conditions of temperature, concentrations, and atmosphere. It turns out that the molecular weight of the insulating polymers plays an essential role in stable film growth and interfacial homogeneity at the phase separation boundary. Fabricating the transistor devices directly at the semiconductor-insulator boundaries, we demonstrate that the mixture of 3,11-didecyldinaphtho[2,3-d:2',3'-d']benzo[1,2-b:4,5-b']dithiophene and poly(methyl methacrylate) with the optimized weight-average molecular weight shows excellent device performances. The spontaneous phase separation with a one-step fabrication process leads to a high mobility up to 10 cm2 V-1 s-1 and a low subthreshold swing of 0.25 V dec-1 even without any surface treatment such as self-assembled monolayer modifications on oxide gate insulators.

  3. Crafting semiconductor organic-inorganic nanocomposites via placing conjugated polymers in intimate contact with nanocrystals for hybrid solar cells.

    Science.gov (United States)

    Zhao, Lei; Lin, Zhiqun

    2012-08-22

    Semiconductor organic-inorganic hybrid solar cells incorporating conjugated polymers (CPs) and nanocrystals (NCs) offer the potential to deliver efficient energy conversion with low-cost fabrication. The CP-based photovoltaic devices are complimented by an extensive set of advantageous characteristics from CPs and NCs, such as lightweight, flexibility, and solution-processability of CPs, combined with high electron mobility and size-dependent optical properties of NCs. Recent research has witnessed rapid advances in an emerging field of directly tethering CPs on the NC surface to yield an intimately contacted CP-NC nanocomposite possessing a well-defined interface that markedly promotes the dispersion of NCs within the CP matrix, facilitates the photoinduced charge transfer between these two semiconductor components, and provides an effective platform for studying the interfacial charge separation and transport. In this Review, we aim to highlight the recent developments in CP-NC nanocomposite materials, critically examine the viable preparative strategies geared to craft intimate CP-NC nanocomposites and their photovoltaic performance in hybrid solar cells, and finally provide an outlook for future directions of this extraordinarily rich field. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Laser excitation induced modifications on distributed feedback microcavities using organic semiconductors

    Science.gov (United States)

    Wang, Tingting; Zhang, Xinping

    2017-06-01

    Distributed feedback (DFB) lasers can be achieved by spin-coating semiconductor polymers onto the top surface of a photoresist grating with designed periods. Optical pumping using lasers within the absorption spectrum of the polymer induced strong modification on the morphological distribution of the polymer film and consequently on the spectroscopic response of the DFB microcavities. The corresponding modification processes resulted mainly from the pump-laser-induced cross-linking of the polymer molecules, which led to the reduction in both the thickness and refractive index of the polymer layer. The location of the polymer laser was lowered from the top to the bottom surface of the DFB grating. Concise modeling on the angle-resolved tuning properties of the output spectrum of the DFB microcavity was achieved with excellent agreement with the experimental observation, which provided clear physical insights into the operation mechanisms of a DFB microcavity.

  5. Compact ultrafast semiconductor disk laser for nonlinear imaging in living organisms

    Science.gov (United States)

    Aviles-Espinosa, Rodrigo; Filippidis, G.; Hamilton, Craig; Malcolm, Graeme; Weingarten, Kurt J.; Südmeyer, Thomas; Barbarin, Yohan; Keller, Ursula; Artigas, David; Loza-Alvarez, Pablo

    2011-03-01

    Ultrashort pulsed laser systems (such as Ti:sapphire) have been used in nonlinear microscopy during the last years. However, its implementation is not straight forward as they are maintenance-intensive, bulky and expensive. These limitations have prevented their wide-spread use for nonlinear imaging, especially in "real-life" biomedical applications. In this work we present the suitability of a compact ultrafast semiconductor disk laser source, with a footprint of 140x240x70 mm, to be used for nonlinear microscopy. The modelocking mechanism of the laser is based on a quantumdot semiconductor saturable absorber mirror (SESAM). The laser delivers an average output power of 287 mW with 1.5 ps pulses at 500 MHz, corresponding to a peak power of 0.4 kW. Its center wavelength is 965 nm which is ideally suited for two-photon excitation of the widely used Green Fluorescent Protein (GFP) marker as it virtually matches its twophoton action cross section. We reveal that it is possible to obtain two photon excited fluorescence images of GFP labeled neurons and secondharmonic generation images of pharynx and body wall muscles in living C. elegans nematodes. Our results demonstrate that this compact laser is well suited for long-term time-lapse imaging of living samples as very low powers provide a bright signal. Importantly this non expensive, turn-key, compact laser system could be used as a platform to develop portable nonlinear bio-imaging devices, facilitating its wide-spread adoption in "real-life" applications.

  6. Generalization of the adsorption process in crystalline porous materials and its application to Metal-Organic Frameworks (MOFs)

    OpenAIRE

    Aduenko, Alexander A.; Murray, Andy; Mendoza-Cortes, Jose L.

    2014-01-01

    In this paper we present an approach for the generalization of adsorption of light gases in crystalline porous materials. Our approach allows the determination of gas uptake considering only geometrical constrains of the porous framework and interaction energy of the guest molecule with the framework. The derivation of this general equation for the uptake of any crystalline porous framework is presented. Based on this theory, we calculated optimal values for the adsorption enthalpy at differe...

  7. Self-consistent theory for the built-in voltage in metal-organic semiconductor-metal structures

    Energy Technology Data Exchange (ETDEWEB)

    Peng Yingquan, E-mail: yqpeng@lzu.edu.cn [Laboratory of Semiconductor Devices and Engineering, Lanzhou University, Tian-Shui Road, Lanzhou 730000 (China); Key Laboratory for Magnetism and Magnetic Materials of the Ministry of Education, Lanzhou University, Lanzhou 730000 (China); Meng Weimin [Key Laboratory for Magnetism and Magnetic Materials of the Ministry of Education, Lanzhou University, Lanzhou 730000 (China); Wang Runsheng; Ma Chaozhu; Li Xunshuan; Xie Hongwei; Li Ronghua; Zhao Ming; Yuan Jianting; Wang Ying [Laboratory of Semiconductor Devices and Engineering, Lanzhou University, Tian-Shui Road, Lanzhou 730000 (China)

    2009-06-30

    A self-consistent theory for calculation of built-in voltage (U{sub bi}) of metal-organic semiconductor-metal (MOSM) structures is developed based on Gaussian energy distribution of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO). It is shown that the built-in voltage depends not only on the work function difference of the two electrodes, but also on the mean energy level of HOMO and LUMO, as well as the Gaussian width of the energy distribution. The theory predicts that the spreading of HOMO and LUMO levels will results in an increase of U{sub bi}, and that U{sub bi} decreases with increasing temperature.

  8. Optical conductivity and optical effective mass in a high-mobility organic semiconductor: Implications for the nature of charge transport

    KAUST Repository

    Li, Yuan

    2014-12-03

    We present a multiscale modeling of the infrared optical properties of the rubrene crystal. The results are in very good agreement with the experimental data that point to nonmonotonic features in the optical conductivity spectrum and small optical effective masses. We find that, in the static-disorder approximation, the nonlocal electron-phonon interactions stemming from low-frequency lattice vibrations can decrease the optical effective masses and lead to lighter quasiparticles. On the other hand, the charge-transport and infrared optical properties of the rubrene crystal at room temperature are demonstrated to be governed by localized carriers driven by inherent thermal disorders. Our findings underline that the presence of apparently light carriers in high-mobility organic semiconductors does not necessarily imply bandlike transport.

  9. Role of band states and trap states in the electrical properties of organic semiconductors: Hopping versus mobility edge model

    KAUST Repository

    Mehraeen, Shafigh

    2013-05-01

    We compare the merits of a hopping model and a mobility edge model in the description of the effect of charge-carrier concentration on the electrical conductivity, carrier mobility, and Fermi energy of organic semiconductors. We consider the case of a composite electronic density of states (DOS) that consists of a superposition of a Gaussian DOS and an exponential DOS. Using kinetic Monte Carlo simulations, we apply the two models in order to interpret the recent experimental data reported for n-doped C60 films. While both models are capable of reproducing the experimental data very well and yield qualitatively similar characteristic parameters for the density of states, some discrepancies are found at the quantitative level. © 2013 American Physical Society.

  10. Nanostructured pyronin Y thin films as a new organic semiconductor: Linear/nonlinear optics, band gap and dielectric properties

    Energy Technology Data Exchange (ETDEWEB)

    Zahran, H.Y. [Metallurgical Lab.1, Nanoscience Laboratory for Environmental and Bio-medical Applications (NLEBA), Semiconductor Lab., Department of Physics, Faculty of Education, Ain Shams University, Roxy, 11757 Cairo (Egypt); Advanced Functional Materials & Optoelectronic Laboratory (AFMOL), Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha (Saudi Arabia); Yahia, I.S., E-mail: dr_isyahia@yahoo.com [Metallurgical Lab.1, Nanoscience Laboratory for Environmental and Bio-medical Applications (NLEBA), Semiconductor Lab., Department of Physics, Faculty of Education, Ain Shams University, Roxy, 11757 Cairo (Egypt); Advanced Functional Materials & Optoelectronic Laboratory (AFMOL), Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha (Saudi Arabia); Alamri, F.H. [Advanced Functional Materials & Optoelectronic Laboratory (AFMOL), Department of Physics, Faculty of Science, King Khalid University, P.O. Box 9004, Abha (Saudi Arabia)

    2017-05-15

    Pyronin Y dye (PY) is a kind of xanthene derivatives. Thin films of pyronin Y were deposited onto highly cleaned glass substrates using low-cost/spin coating technique. The structure properties of pyronin Y thin films with different thicknesses were investigated by using X-ray diffraction (XRD) and atomic force microscope (AFM). PY thin films for all the studied thicknesses have an amorphous structure supporting the short range order of the grain size. AFM supports the nanostructure with spherical/clusters morphologies of the investigated thin films. The optical constants of pyronin Y thin films for various thicknesses were studied by using UV–vis–NIR spectrophotometer in the wavelength range 350–2500 nm. The transmittance T(λ), reflectance R(λ) spectral and absorbance (abs(λ)) were obtained for all film thicknesses at room temperature and the normal light incident. These films showed a high transmittance in the wide scale wavelengths. For different thicknesses of the studied thin films, the optical band gaps were determined and their values around 2 eV. Real and imaginary dielectric constants, dissipation factor and the nonlinear optical parameters were calculated in the wavelengths to the range 300–2500 nm. The pyronin Y is a new organic semiconductor with a good optical absorption in UV–vis regions and it is suitable for nonlinear optical applications. - Highlights: • Pyronin Y (PY) nanostructured thin films were deposited by using spin coating technique. • XRD/AFM were used to study the structure of PY films. • The optical band gap was calculated on the basis of Tauc's model. • Linear/nonlinear optical parameters are calculated and interpreted via the applied optical theories. • PY thin films is a new organic semiconductor for its application in optoelectronic devices.

  11. Efficient and Stable Ternary Organic Solar Cells Based on Two Planar Nonfullerene Acceptors with Tunable Crystallinity and Phase Miscibility.

    Science.gov (United States)

    Wang, Jialin; Peng, Jiajun; Liu, Xiaoyu; Liang, Ziqi

    2017-06-21

    Planar perylene diimides (PDIs), when used as nonfullerene acceptors for organic photovoltaics, are constrained by their large π-aggregation in solid state. To tackle this issue, another planar nonfullerene acceptor 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone)-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC) with weak crystallinity and near-infrared light absorption is introduced into the PTB7-Th:PDI binary blend to fabricate efficient and stable ternary solar cells. We have finely tuned the PDI/ITIC weight ratio to investigate the influences of individual ITIC and PDI on the optical, electronic, and morphological properties of the PTB7-Th:ITIC:PDI ternary blend. Compared to the binary blend, complementary optical absorption is achieved in all ternary blends. More importantly, it is found that ITIC plays a critical role on largely suppressing the PDI aggregates in the PTB7-Th:PDI blend, while PDI aids to form an interpenetrating network morphology to facilitate charge transport in the PTB7-Th:ITIC blend. Consequently, when the PDI/ITIC ratio is 3:7 (w/w), the PTB7-Th:ITIC:PDI based inverted solar cells exhibit the highest power conversion efficiency of 8.64% due to their favorable out-of-plane π-π stacking, finest phase-separation morphology, and highest charge mobility. Remarkably, the optimal cells that are solution-processed in air show the promising efficiency of 7.09%, suggesting good ambient stability of such ternary solar cells.

  12. Optical, Electrical and Magnetic Studies of Pi-Conjugated Organic Semiconductor Systems

    Energy Technology Data Exchange (ETDEWEB)

    Vardeny, Zeev Valentine [Univ. of Utah, Salt Lake City, UT (United States)

    2016-09-15

    Over the duration of this grant our group has studied the transient and cw optical response of various π-conjugated polymers, oligomers, single crystals, fullerene molecules and blends of organic donor-acceptor molecules. We have been also involved in complementary experiments such as magneto-optical studies and spin-physics. We have advanced the field of photophysics of these materials by providing information on their excited state energies and primodal and long-lived photoexcitations such as singlet excitons, triplet excitons, polaron-pairs, excimers and exciplexes. We also fabricated various organic optoelectronic devices such as organic light emitting diodes (OLED), electrochemical cells, organic diodes, organic spin-valves (OSV), and organic photovoltaic (OPV) solar cells. These devices benefited the society in terms of cheap and energy saving illumination, as well as harnessing the solar energy.

  13. Single-crystalline organic-inorganic layered cobalt hydroxide nanofibers: facile synthesis, characterization, and reversible water-induced structural conversion.

    Science.gov (United States)

    Guo, Xiaodi; Wang, Lianying; Yue, Shuang; Wang, Dongyang; Lu, Yanluo; Song, Yufei; He, Jing

    2014-12-15

    New pink organic-inorganic layered cobalt hydroxide nanofibers intercalated with benzoate ions [Co(OH)(C6H5COO)·H2O] have been synthesized by using cobalt nitrate and sodium benzoate as reactants in water with no addition of organic solvent or surfactant. The high-purity nanofibers are single-crystalline in nature and very uniform in size with a diameter of about 100 nm and variable lengths over a wide range from 200 μm down to 2 μm by simply adjusting reactant concentrations. The as-synthesized products are well-characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), fast Fourier transforms (FFT), X-ray diffraction (XRD), energy dispersive X-ray spectra (EDX), X-ray photoelectron spectra (XPS), elemental analysis (EA), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), and UV-vis diffuse reflectance spectra (UV-vis). Our results demonstrate that the structure consists of octahedral cobalt layers and the benzoate anions, which are arranged in a bilayer due to the π-π stacking of small aromatics. The carboxylate groups of benzoate anions are coordinated to Co(II) ions in a strong bridging mode, which is the driving force for the anisotropic growth of nanofibers. When NaOH is added during the synthesis, green irregular shaped platelets are obtained, in which the carboxylate groups of benzoate anions are coordinated to the Co(II) ions in a unidentate fashion. Interestingly, the nanofibers exhibit a reversible transformation of the coordination geometry of the Co(II) ions between octahedral and pseudotetrahedral with a concomitant color change between pink and blue, which involves the loss and reuptake of unusual weakly coordinated water molecules without destroying the structure. This work offers a facile, cost-effective, and green strategy to rationally design and synthesize functional nanomaterials for future applications in catalysis, magnetism

  14. Achieving balanced intermixed and pure crystalline phases in PDI-based non-fullerene organic solar cells via selective solvent additives.

    Science.gov (United States)

    Li, Mingguang; Liu, Jiangang; Cao, Xinxiu; Zhou, Ke; Zhao, Qiaoqiao; Yu, Xinhong; Xing, Rubo; Han, Yanchun

    2014-12-28

    Herein, balanced intermixed and pure crystalline phases in N,N'-bis(1-ethylpropyl)-perylene-3,4,9,10-tetracarboxylic diimide (EP-PDI)-based non-fullerene organic solar cells (OSCs) were achieved via selective solvent additives (SAs). Poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl

  15. Photoelectrochemical studies on colloidal copper (I) oxide/modified with some organic semiconductors: Incentive for use of nanoparticle systems

    Indian Academy of Sciences (India)

    Kasem K Kasem; Carmen Davis

    2008-12-01

    Colloidal Cu2O solutions were used to explore photonic activities at the semiconductor/electrolyte interface. Fluorescence spectroscopic studies were performed on Cu2O colloidal particles modified with some conjugated organic monomers such as 2-amino-phenyl pyrrole (2-APPy), tri-phenyl amine (TPA), or 2-thionyl pyrrole (2-Th-Py) to investigate the quantum absorbance efficiency at this inorganic/organic interface (IOI). Our study shows that colloidal -type Cu2O possesses a bandgap with direct transition of ≈ 2.2 eV and indirect transition of 1.85 eV. The recorded rates of charge injection into colloidal Cu2O, ct, were 2.31 × 109 s-1, 5.05 × 108 s-1, and 7.22 × 108 s-1 for 2-APPy, TPA and 2-Th-Py, respectively. The studied systems show more stability in colloidal form than in thin solid form. Results were interpreted using the optical and electrical parameters of the organic monomer such as ionization potential (IP), electron affinity (EA) and energy bandgap (Eg), and the barrier height at the IOI interface. Stability of the colloidal system is attributed to the physical dimensions of the photoactive system. The nano-colloidal particle offers a condition where its size is less than √.

  16. Electronic Properties of Optically Switchable Photochromic Diarylethene Molecules at the Interface with Organic Semiconductors.

    Science.gov (United States)

    Wang, Qiankun; Frisch, Johannes; Herder, Martin; Hecht, Stefan; Koch, Norbert

    2017-04-05

    Light-switching-induced changes in the electronic properties of photochromic diarylethene, i.e., 1,2-bis(2-methyl-5-p-tolylthiophen-3-yl)cyclopent-1-ene (DAE1), thin films at interfaces to a gold electrode and two polymer semiconductors are investigated by direct and inverse photoelectron spectroscopy. The photoisomerization is achieved by in situ irradiation of ultraviolet and visible light. Efficient and reversible switching between the open and closed isomers of DAE1 is evidenced at all interfaces, with profound impact on the energy-level alignment. The frontier occupied level of DAE1 changes by 0.8 eV with respect to the Au Fermi level upon switching. Corresponding sizable changes in the electron and transport level offsets between the two polymers and DAE1 in its open and closed form are determined. This gives rise to fundamentally different functionality of these interfaces in terms of charge transport. Our study proves the viability of light-controlled energy-level manipulation at various interfaces in photoswitchable opto-electronic devices.

  17. Organic semiconductor wastewater treatment using a four-stage Bardenpho with membrane system.

    Science.gov (United States)

    Chung, Jinwook; Fleege, Daniel; Ong, Say Kee; Lee, Yong-Woo

    2014-01-01

    Electronic wastewater from a semiconductor plant was treated with a pilot-scale four-stage Bardenpho process with membrane system. The system was operated over a 14-month period with an overall hydraulic retention time (HRT) ranging from 9.5 to 30 h. With a few exceptions, the pilot plant consistently treated the electronic wastewater with an average removal efficiency of chemical oxygen demand (COD) and total nitrogen of 97% and 93%, respectively, and achieving effluent quality of COD<15 mg/L, turbidity<1, and silt density index<1. Based on removal efficiencies of the pilot plant, it is possible to lower the HRT to less than 9.5 h to achieve comparable removal efficiencies. An energy-saving configuration where an internal recycle line was omitted and the biomass recycle was rerouted to the pre-anoxic tank, can reduce energy consumption by 8.6% and gave removal efficiencies that were similar to the Bardenpho process. The system achieved pre-anoxic and post-anoxic specific denitrification rate values with a 95% confidence interval of 0.091 ± 0.011 g NO₃-N/g MLVSS d and 0.087 ± 0.016 g NO₃-N/g MLVSS d, respectively. The effluent from the four-stage Bardenpho with membrane system can be paired with a reverse osmosis system to provide further treatment for reuse purposes.

  18. Organic/IR-Semiconductor heterojunctions for low-cost, high temperature IR arrays

    Science.gov (United States)

    Jones, Colin E.

    1992-08-01

    This program evaluated a new technology for producing infrared photo-diodes in HgCdTe and InSb using evaporated organic heterojunctions. High quantum-efficiency IR detectors were demonstrated with the organic process comparable to commercial IR detectors. The organic photodiodes at room temperature were better than commercial detectors. They had lower leakage currents and higher resistance-area products (RoAs). Detector arrays made with the organics can operate at higher temperatures than the current detectors. Initial data at low temperatures were poorer than commercial detectors with lower RoAs and slightly higher 1/f noise. This comparison at low temperature may change with further optimization of the organic process. The organic diode process is very simple, low cost and non-damaging to the HgCdTe or InSb. It involves thermal evaporation of the organic onto the HgCdTe or InSb followed by evaporation of metal contacts through a shadow mask. Phase 1 demonstrated organic/HaCdTe IR detectors with quantum efficiencies similar to commercial devices operating at higher temperatures. The technology is ready for a Phase 2 to further optimize the processing for IR arrays and to increase yields.

  19. Photochemical Molecular Tailoring for Efficient Diffusion and Reorganization of Organic Nanocrystals for Ultra-Flexible Organic Semiconductor Arrays.

    Science.gov (United States)

    Kang, Jingu; Kim, Jaehyun; Jo, Jeong-Wan; Heo, Jae Sang; Kim, Myung-Gil; Kim, Yong-Hoon; Kim, Jaekyun; Park, Sung Kyu

    2017-01-01

    Solution-processed organic single crystals with high carrier mobility have been actively investigated for diverse applications such as displays, sensors, and next generation electronics on a flexible platform. However, the lack of precise alignment and growth control of organic single crystals impedes the widespread adoption of organic materials in an industrial perspective. Here, a photochemical modification approach is reported tailoring the solubility and molecular diffusivity of polymeric sacrificial layer and sequential batch-type vapor annealing to implement high-performance (average saturation mobility: 8.01 cm(2) V(-1) s(-1) ) organic single-crystal thin film transistors with large channel width including multiple aligned single crystals. Additionally, the mechanical properties of the organic single crystals are systematically investigated with extreme strain conditions such as bending radius of 150 μm.

  20. Engineering interfacial properties of organic semiconductors through soft-contact lamination and surface functionalization

    Science.gov (United States)

    Shu, Andrew Leo

    Organic electronics is a topic of interest due to its potential for low temperature and solution processing for large area and flexible applications. Examples of organic electronic devices are already available on the market; however these are, in general, still rather expensive. In order to fully realize inexpensive and efficient organic electronics, the properties of organic films need to be understood and strategies developed to take advantage of these properties to improve device performance. This work focuses on two strategies that can be used to control charge transport at interfaces with active organic semiconducting thin films. These strategies are studied and verified with a range of photoemission spectroscopy, surface probe microscopy, and electrical measurements. Vacuum evaporated molecular organic devices have long used layer stacking of different materials as a method of dividing roles in a device and modifying energy level alignment to improve device performance and efficiency. Applying this type of architecture for solution-processed devices, on the other hand, is nontrivial, as an issue of removal of or mixing with underlying layers arises. We present and examine here soft-contact lamination as a viable technique for depositing solution-processed multilayer structures. The energetics at homojunctions of a couple of air-stable polymers is investigated. Charge transport is then compared between a two-layer film and a single-layer film of equivalent thicknesses. The interface formed by soft-contact lamination is found to be transparent with respect to electronic charge carriers. We also propose a technique for modifying electronic level alignment at active organic-organic heterojunctions using dipolar self-assembled monolayers (SAM). An ultra-thin metal oxide is first deposited via a gentle low temperature chemical vapor deposition as an adhesion layer for the SAM. The deposition is shown to be successful for a variety of organic films. A series of

  1. Tuning exchange interactions in organometallic semiconductors

    Science.gov (United States)

    Rawat, Naveen; Manning, Lane W.; Hua, Kim-Ngan; Headrick, Randall L.; Cherian, Judy G.; Bishop, Michael M.; McGill, Stephen A.; Furis, Madalina I.

    2015-09-01

    Organic semiconductors are emerging as a leading area of research as they are expected to overcome limitations of inorganic semiconductor devices for certain applications where low cost manufacturing, device transparency in the visible range or mechanical flexibility are more important than fast switching times. Solution processing methods produce thin films with millimeter sized crystalline grains at very low cost manufacturing prices, ideally suited for optical spectroscopy investigations of long range many-body effects in organic systems. To this end, we synthesized an entire family of organosoluble 3-d transition metal Pc's and successfully employed a novel solution-based pen-writing deposition technique to fabricate long range ordered thin films of mixtures of metal-free (H2Pc) molecule and organometallic phthalocyanines (MPc's). Our previous studies on the parent MPc crystalline thin films identified different electronic states mediating exchange interactions in these materials. This understanding of spin-dependent exchange interaction between delocalized π-electrons with unpaired d spins enabled the further tuning of these interactions by mixing CoPc and H2Pc in different ratios ranging from 1:1 to 1000:1 H2Pc:MPc. The magnitude of the exchange is also tunable as a function of the average distance between unpaired spins in these materials. Furthermore, high magnetic field (B materials.

  2. One-dimensional self-confinement promotes polymorph selection in large-area organic semiconductor thin films

    KAUST Repository

    Giri, Gaurav

    2014-04-16

    A crystal\\'s structure has significant impact on its resulting biological, physical, optical and electronic properties. In organic electronics, 6,13(bis-triisopropylsilylethynyl)pentacene (TIPS-pentacene), a small-molecule organic semiconductor, adopts metastable polymorphs possessing significantly faster charge transport than the equilibrium crystal when deposited using the solution-shearing method. Here, we use a combination of high-speed polarized optical microscopy, in situ microbeam grazing incidence wide-angle X-ray-scattering and molecular simulations to understand the mechanism behind formation of metastable TIPS-pentacene polymorphs. We observe that thin-film crystallization occurs first at the air-solution interface, and nanoscale vertical spatial confinement of the solution results in formation of metastable polymorphs, a one-dimensional and large-area analogy to crystallization of polymorphs in nanoporous matrices. We demonstrate that metastable polymorphism can be tuned with unprecedented control and produced over large areas by either varying physical confinement conditions or by tuning energetic conditions during crystallization through use of solvent molecules of various sizes. © 2014 Macmillan Publishers Limited.

  3. Characterization of solution structure and its importance in thin film ordering of conjugated block copolymers for organic semiconductor devices

    Science.gov (United States)

    Brady, Michael; Ku, Sung-Yu; Cochran, Justin; Wang, Cheng; Hawker, Craig; Kramer, Edward; Chabinyc, Michael

    2014-03-01

    Fully conjugated diblock copolymers (CBCPs) form intriguing materials alternatives to polymer-small molecule blends for their control of mesoscopic order in low-cost organic semiconductor devices. In both bulk heterojunction (BHJ) photovoltaics, consisting of an interpenetrating network with high donor-acceptor interfacial area, and ambipolar transistors, the transport of charge carriers through continuous p- and n-type paths in thin films is a controlling factor in device performance. AFM, GIWAXS, NEXAFS spectroscopy, and RSoXS are used to probe the structure of films of CBCPs with a p-type P3HT block and an n-type DPP block. Thermal annealing in the P3HT melt after casting creates ordered domains with ~ 50 nm in-plane lamellar spacings, as confirmed with GISAXS and RSoXS. GIWAXS diffraction from the (h00) alkyl-stacking and (010) pi-stacking planes shows primarily edge-on orientation for crystals of both P3HT and DPP blocks. In addition, temperature-dependent solution SAXS and UV-Vis spectroscopy are used to probe the size and conformation of casting solution aggregates. Fibrillar DPP aggregates direct the crystallization of P3HT- b-DPP following film casting and enable the formation of wormlike domains after annealing and thus ideal morphologies for transport in organic devices.

  4. Screening of inorganic wide-bandgap p-type semiconductors for high performance hole transport layers in organic photovoltaic devices

    Science.gov (United States)

    Ginley, David; Zakutayev, Andriy; Garcia, Andreas; Widjonarko, Nicodemus; Ndione, Paul; Sigdel, Ajaya; Parilla, Phillip; Olson, Dana; Perkins, John; Berry, Joseph

    2011-03-01

    We will report on the development of novel inorganic hole transport layers (HTL) for organic photovoltaics (OPV). All the studied materials belong to the general class of wide-bandgap p-type oxide semiconductors. Potential candidates suitable for HTL applications include SnO, NiO, Cu2O (and related CuAlO2, CuCrO2, SrCu2O4 etc) and Co3O4 (and related ZnCo2O4, NiCo2O4, MgCo2O4 etc.). Materials have been optimized by high-throughput combinatorial approaches. The thin films were deposited by RF sputtering and pulsed laser deposition at ambient and elevated temperatures. Performance of the inorganic HTLs and that of the reference organic PEDOT:PSS HTL were compared by measuring the power conversion efficiencies and spectral responses of the P3HT/PCBM- and PCDTBT/PCBM-based OPV devices. Preliminary results indicate that Co3O4-based HTLs have performance comparable to that of our previously reported NiOs and PEDOT:PSS HTLs, leading to a power conversion efficiency of about 4 percent. The effect of composition and work function of the ternary materials on their performance in OPV devices is under investigation.

  5. A novel single-stranded DNA detection method based on organic semiconductor heterojunction

    Science.gov (United States)

    Gu, Wen; Liu, Hongbo; Zhang, Xia; Zhang, Hao; Chen, Xiong; Wang, Jun

    2016-12-01

    We demonstrate a novel DNA detection method with low-cost and disposable advantages by utilizing F16CuPc/CuPc planar organic heterojunction device. Single-stranded DNA (ssDNA) molecules have been well immobilized on the surface of CuPc film observed by atomic force microscopy, producing an obvious electrical response of the device. The conductivity of the organic heterojunction film was significantly increased by ssDNA immobilization because ssDNA molecules brought additional positive charges at heterojunction interface. Furthermore, the thickness dependence of CuPc upper layer on the electrical response was studied to optimize the sensitivity. This study will be helpful for the development of organic heterojunction based biosensors.

  6. A bio-inspired memory device based on interfacing Physarum polycephalum with an organic semiconductor

    Directory of Open Access Journals (Sweden)

    Agostino Romeo

    2015-01-01

    Full Text Available The development of devices able to detect and record ion fluxes is a crucial point in order to understand the mechanisms that regulate communication and life of organisms. Here, we take advantage of the combined electronic and ionic conduction properties of a conducting polymer to develop a hybrid organic/living device with a three-terminal configuration, using the Physarum polycephalum Cell (PPC slime mould as a living bio-electrolyte. An over-oxidation process induces a conductivity switch in the polymer, due to the ionic flux taking place at the PPC/polymer interface. This behaviour endows a current-depending memory effect to the device.

  7. Quasi continuous-wave lasing in organic thin-film semiconductors (Conference Presentation)

    Science.gov (United States)

    Sanadanayaka, Atula S. D.; Yoshida, Kou; Ribierre, Jean-Charles; Matsushima, Toshinori; Adachi, Chihaya

    2016-09-01

    Since the discovery of organic solid-state lasers, great efforts have been devoted to the development of continuous-wave (cw) lasing in organic materials. However, the operation of organic solid-state lasers under optical cw excitation or pulse excitation at a very high repetition rate (quasi-cw excitation) is extremely challenging. In this work, we have demonstrated quasi-continuous-wave (quasi-cw) surface-emitting lasing in a distributed feedback device which combines a second-order grating with an organic thin film of a host material 4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP) blended with an organic laser dye 4,4'-bis[(N-carbazole)styryl]biphenyl (BSBCz). When pumping the device with optical picosecond pulse excitation, the quasi-cw laser operation maintained up to a repetition rate of 8 MHz. The lasing threshold was around 0.25 μJ cm-2 which was almost independent of the repetition rates. For our laser devices, the maximum repetition rate (8 MHz) is the highest ever reported, and the lasing threshold (0.25 μJ cm-2) is the lowest ever reported. These superior quasi-cw lasing characteristics in BSBCz are accomplished by the less generation of triplet excitons via intersystem crossing because a photoluminescence quantum yield of the blend film is nearly 100% and there is no significant spectral overlap between laser and triplet absorption.[1,2] Triplet quenchers, generally used for the fabrication of organic thin-film lasers, were not necessary in our devices because of negligible accumulation of triplet excitons and a small spectral overlap between emission and triplet absorption. Therefore, we believe that BSBCz is the most promising candidate for the first realization of electrically pumped organic laser diodes in terms of optical characteristics. However, electrical characteristics such as charge carrier mobility, charge carrier capture cross section, etc., are also extremely important and will need further investigation and enhancement for realization of

  8. A bio-inspired memory device based on interfacing Physarum polycephalum with an organic semiconductor

    Energy Technology Data Exchange (ETDEWEB)

    Romeo, Agostino; Dimonte, Alice; Tarabella, Giuseppe; D’Angelo, Pasquale, E-mail: dangelo@imem.cnr.it, E-mail: iannotta@imem.cnr.it; Erokhin, Victor; Iannotta, Salvatore, E-mail: dangelo@imem.cnr.it, E-mail: iannotta@imem.cnr.it [IMEM-CNR, Institute of Materials for Electronics and Magnetism-National Research Council, Parma 43124 (Italy)

    2015-01-01

    The development of devices able to detect and record ion fluxes is a crucial point in order to understand the mechanisms that regulate communication and life of organisms. Here, we take advantage of the combined electronic and ionic conduction properties of a conducting polymer to develop a hybrid organic/living device with a three-terminal configuration, using the Physarum polycephalum Cell (PPC) slime mould as a living bio-electrolyte. An over-oxidation process induces a conductivity switch in the polymer, due to the ionic flux taking place at the PPC/polymer interface. This behaviour endows a current-depending memory effect to the device.

  9. A method for the combined measurement of volatile and condensable organic AMC in semiconductor applications

    Science.gov (United States)

    Miller, Charles M.; Zaloga, Emily C.; Lobert, Jürgen M.

    2014-04-01

    Monitoring airborne molecular contamination (AMC) at the parts per trillion (ppt) level in cleanroom environments, scanner applications and compressed gas lines is essential for processes, equipment and yield-control. For the operation of EUV tools, in particular, volatile organic contamination is known to have as much impact as condensable organic compounds, which requires a suitable sampling and measurement methodology. Some of the current industry standards use sample traps comprised of porous 2,6-diphenylene-oxide polymer resin, such as Tenax®, for measuring volatile organic (6 C atoms, about toluene and higher) AMC. Inherent problems associated with these traps are a number of artifacts and chemical reactions that reduce accuracy of reported organic AMC concentrations. The break-down of the polymeric material forms false positive artifacts when used in the presence of reactive gases, such as nitrous acid and ozone, which attack and degrade the polymer to form detectable AMC. Most importantly, these traps have poor capture efficiency for volatile organic compounds (VOC). To address the disadvantages of polymer-based sample traps, we developed a method based on carbonaceous, multi-layered adsorbent traps to replace the 2,6-diphenylene-oxide polymer resin sample trap type. Along with the new trap's ability to retain volatile organics, the trap was found to provide artifact-free results. With industry trends towards detecting more contaminants while continuously reducing required reporting limits for those compounds, artifact-free and accurate detection of AMC is needed at the parts per quadrillion (ppq) level. The proposed, multi-layered trap substantially increases laboratory productivity and reduces cost by eliminating the need to analyze condensable and volatile organic compounds in two separate methods. In our studies, even some organic compounds with six C-atoms, that are part of exposure tool OEM requirements, were not effectively retained by polymeric

  10. Evidence of intrinsic ambipolar charge transport in a high band gap organic semiconductor

    OpenAIRE

    Moreno, César; Pfattner, Raphael; Mas-Torrent, Marta; Puigdollers, Joaquim; Bromley, Stefan T.; Rovira, Concepció; Veciana, Jaume; Alcubilla, Ramón

    2012-01-01

    Theoretical and experimental investigations combining in situ Kelvin probe microscopy (KPM) and macroscopic electrical studies are employed to explore the intrinsic transport in dithiophene-tetrathiafulvalene (DT-TTF) single crystal organic field-effect transistors. Our work demonstrates that ambipolar behavior is not restricted only to materials possessing a high electron affinity and thus may be a more general phenomenon. Peer Reviewed

  11. Functionalization of organic semiconductor crystals via the Diels-Alder reaction.

    Science.gov (United States)

    Qualizza, Brittni A; Prasad, Srividya; Chiarelli, M Paul; Ciszek, Jacob W

    2013-05-18

    A surface adlayer is generated on organic single crystals (tetracene and rubrene) using the site specific Diels-Alder reaction and a series of vapor phase dienophiles. X-ray photoelectron spectroscopy (XPS) confirms adsorption on the surfaces of tetracene and rubrene and mass spectrometry demonstrates the reaction's applicability to a range of dienophiles.

  12. Single crystalline mesoporous silicon nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Hochbaum, Allon; Dargas, Daniel; Hwang, Yun Jeong; Yang, Peidong

    2009-08-18

    Herein we demonstrate a novel electroless etching synthesis of monolithic, single-crystalline, mesoporous silicon nanowire arrays with a high surface area and luminescent properties consistent with conventional porous silicon materials. The photoluminescence of these nanowires suggest they are composed of crystalline silicon with small enough dimensions such that these arrays may be useful as photocatalytic substrates or active components of nanoscale optoelectronic devices. A better understanding of this electroless route to mesoporous silicon could lead to facile and general syntheses of different narrow bandgap semiconductor nanostructures for various applications.

  13. Electronic properties and chemistry of metal / organic semiconductor/ S-GaAs(100) heterosructures

    Energy Technology Data Exchange (ETDEWEB)

    Gavrila, G.N.

    2005-10-21

    in the framework of this thesis three perylene derivates are applied as interlayers in metal/organic layer/S-GaAs(100) heterostructures. The aim of this thesis is to prove the influence of different chemical end-groups on the electronic and chemical properties of the interfaces, as well as the molecular orientation in the organic layers. The molecules 3,4,9,10-perylene tetracarbonic acid dianhydride (PTCDA), 3,4,9,10-perylene tetracarbonic acid diimide (PTCDI), and dimethyl-3,4,9,10-perylene tetracarbonic acid diimide (DiMe-PTCDI) were evaporated by organic molecular beam deposition (OMBD) in the ultrahigh vacuum on sulfur-passivated GaAs(001):2 x 1 substrates. Surface-sensitive characterization procedures as photoemission spectroscopy (PES), inverse photoemission spectroscopy (IPES), and near-edge X-ray fine-structure measurements (NEXAFS) were applied for the characterization. Theoretical calculations by means of the density-functional methods were performed, in order to allow an assignment of different components in core-level spectra. The NEXAFS spectra allow a precise determination of the molecule orientation in relation to the substrate. So it can be proved that a small change of chemical end-groups for instance in DiMe-PTCDI compared with PTCDI causes a dramatic change of the molecule orientation. The valence-band spectra of DiMe-PTCDI show an energetic dispersion of 0.2 eV, which can be assigned to a {pi}-orbital overlap and covers the formation of valence bands. The energy-level fitting to the organic-layer/S-GaAs interface as well as the transport band gap of PTCDI, DiMe-PTCDI, and PTCDA were deteminde by means of PES and IPES. The electronic, chemical, and structural properties of metal/organic-layer interfaces were studied by means of core-level spectroscopy and NEXAFS. Mg reacts strongly with the end-groups of PTCDA AND ptcdi, while the In atoms contribute to a charge-transfer process with the perylene cores of all three molecules, whereby the

  14. Studying the operation characteristics and structure of vertical channel copper-phthalocyanine organic semiconductor transistor

    Institute of Scientific and Technical Information of China (English)

    ZHU Min; SONG Ming-xin; GUI Tai-long; WANG Xuan; YIN Jing-hua; WANG Dong-xing; ZHAO Hong

    2005-01-01

    The creation of Au/CuPc/Al/CuPc/structure is a perpendicular type electricity found in the channel of organic static induction transistor. In the following we analyze transistor operation characteristics and machine structural relation. The results express that the transistor drives the voltage low and has no-saturation currentvoltage characteristics. Its operation characteristics are dependant on gate bias voltage and the construction of the aluminum electrode.The vertical channel of organic static induction transistor (OSIT) , with structure of Au/CuPc/Al/CuPc/Cu, has been determined. According to the test results, the relation of its operation characteristics and device structure was analyzed. The results show that this transistor has a low driving voltage and unsaturation Ⅰ-Ⅴ characteristics. Its operation characteristics are dependant on gate bias voltage and the structure of the aluminum electrode.

  15. Lasing in organic semiconductors - time-resolved studies of non-radiative decay processes

    CERN Document Server

    Zenz, C R

    2000-01-01

    Based on the demonstration of optical gain in an organic single crystal of a soluble oligo-phenylene-vinylene with gain values higher than 60 cm-1 and optically pumped lasing in a longitudinal adjustable microcavity based on laddertype polyparaphenylene, the realization of an organic laserdiode is discussed. The output characteristics of the microcavity can be modeled using classical rate equations, however the obtained threshold values are limited by the short excited state lifetime. A comparison with the lifetime measured on isolated molecules shows, that non-radiative decay processes in the solid state are determining the excited state lifetime. Using conventional and a novel field-assisted differential transmission spectroscopy with femtosecond time resolution, two main decay mechanism could be identified. (i) Triplet exciton in para-hexaphenyl is formed by non-geminate recombination of photo-generated polarons. (ii) Dissociation of the luminescent singlet excitons into polarons is important for two reaso...

  16. Evidence of intrinsic ambipolar charge transport in a high band gap organic semiconductor

    OpenAIRE

    Moreno Sierra, César; Pfattner, Raphael; Mas-Torrent, Marta; Puigdollers-González, Joaquim; Bromley, Stefan T.; Rovira Angulo, Concepció; Veciana Miró, Jaume; Alcubilla-González, Ramón

    2012-01-01

    Theoretical and experimental investigations combining in situ Kelvin probe microscopy (KPM) and macroscopic electrical studies are employed to explore the intrinsic transport in dithiophene-tetrathiafulvalene (DT-TTF) single crystal organic field-effect transistors. Our work demonstrates that ambipolar behavior is not restricted only to materials possessing a high electron affinity and thus may be a more general phenomenon. © 2012 The Royal Society of Chemistry.

  17. Robust Manipulation of Magnetism in Dilute Magnetic Semiconductor (Ga,Mn)As by Organic Molecules.

    Science.gov (United States)

    Wang, Xiaolei; Wang, Hailong; Pan, Dong; Keiper, Timothy; Li, Lixia; Yu, Xuezhe; Lu, Jun; Lochner, Eric; von Molnár, Stephan; Xiong, Peng; Zhao, Jianhua

    2015-12-22

    Surface adsorption of organic molecules provides a new method for the robust manipulation of ferromagnetism in (Ga,Mn)As. Electron acceptor and donor molecules yield significant enhancement and suppression, respectively, of ferromagnetism with modulation of the Curie temperature spanning 36 K. Dip-pen nanolithography is employed to directly pattern monolayers on (Ga,Mn)As, which is presented as a novel pathway toward producing magnetic nanostructures.

  18. Nonlinear Transport in Organic Thin Film Transistors with Soluble Small Molecule Semiconductor.

    Science.gov (United States)

    Kim, Hyeok; Song, Dong-Seok; Kwon, Jin-Hyuk; Jung, Ji-Hoon; Kim, Do-Kyung; Kim, SeonMin; Kang, In Man; Park, Jonghoo; Tae, Heung-Sik; Battaglini, Nicolas; Lang, Philippe; Horowitz, Gilles; Bae, Jin-Hyuk

    2016-03-01

    Nonlinear transport is intensively explained through Poole-Frenkel (PF) transport mechanism in organic thin film transistors with solution-processed small molecules, which is, 6,13-bis(triisopropylsilylethynyl) (TIPS) pentacene. We outline a detailed electrical study that identifies the source to drain field dependent mobility. Devices with diverse channel lengths enable the extensive exhibition of field dependent mobility due to thermal activation of carriers among traps.

  19. Designing small molecule polyaromatic p- and n-type semiconductor materials for organic electronics

    KAUST Repository

    Collis, Gavin E.

    2015-12-22

    By combining computational aided design with synthetic chemistry, we are able to identify core 2D polyaromatic small molecule templates with the necessary optoelectronic properties for p- and n-type materials. By judicious selection of the functional groups, we can tune the physical properties of the material making them amenable to solution and vacuum deposition. In addition to solubility, we observe that the functional group can influence the thin film molecular packing. By developing structure-property relationships (SPRs) for these families of compounds we observe that some compounds are better suited for use in organic solar cells, while others, varying only slightly in structure, are favoured in organic field effect transistor devices. We also find that the processing conditions can have a dramatic impact on molecular packing (i.e. 1D vs 2D polymorphism) and charge mobility; this has implications for material and device long term stability. We have developed small molecule p- and n-type materials for organic solar cells with efficiencies exceeding 2%. Subtle variations in the functional groups of these materials produces p- and ntype materials with mobilities higher than 0.3 cm2/Vs. We are also interested in using our SPR approach to develop materials for sensor and bioelectronic applications.

  20. Designing small molecule polyaromatic p- and n-type semiconductor materials for organic electronics

    Science.gov (United States)

    Collis, Gavin E.

    2015-12-01

    By combining computational aided design with synthetic chemistry, we are able to identify core 2D polyaromatic small molecule templates with the necessary optoelectronic properties for p- and n-type materials. By judicious selection of the functional groups, we can tune the physical properties of the material making them amenable to solution and vacuum deposition. In addition to solubility, we observe that the functional group can influence the thin film molecular packing. By developing structure-property relationships (SPRs) for these families of compounds we observe that some compounds are better suited for use in organic solar cells, while others, varying only slightly in structure, are favoured in organic field effect transistor devices. We also find that the processing conditions can have a dramatic impact on molecular packing (i.e. 1D vs 2D polymorphism) and charge mobility; this has implications for material and device long term stability. We have developed small molecule p- and n-type materials for organic solar cells with efficiencies exceeding 2%. Subtle variations in the functional groups of these materials produces p- and ntype materials with mobilities higher than 0.3 cm2/Vs. We are also interested in using our SPR approach to develop materials for sensor and bioelectronic applications.

  1. Production of organic-semiconductor nanostructures by solid-phase wetting. Guided growth, molecular data storage, and local coadsorption; Erzeugung organischer Halbleiter-Nanostrukturen durch Festphasenbenetzung. Gefuehrtes Wachstum, molekulare Datenspeicherung und lokale Koadsorption

    Energy Technology Data Exchange (ETDEWEB)

    Trixler, Frank

    2007-09-10

    The present thesis treats questions from the interdisciplinary field of nanosciences by studies by means of scanning tunneling microscopy and computer chemistry. The main part of this thesis is the presentation of a novel structure formation process on molecular level. The presented model describes this process by nanocrystals, which show - suspended in a matrix - in contact with a crystal surface a behaviour, which is in spite present solid-state properties (crystalline order) similar to the behaviour of liquid drops in the wetting of surfaces. Starting from this the technological potential of this new process is made accessible.: 1.) Adsorbate structures of a series of organic semiconductors are described for the first time. By this it is additionally shown that by supramolecular solid-phase wetting unsolvable semiconductor molecules can be very simply and under environmental conditions orderedly adsorbed. 2.) An explanation model is developed, by which the hitherto not understandable molecular data storage by means of PTCDA molecules can be theoretically explained and extended to further molecules. 3.) The development of a nanofabrication concept is presented, which allows a local control of the growth of nanostructures. The advance against a classical molecule-for-molecule performed nanostructuration lies therein that by the tip of a scanning tunneling microscope solely the information of growth directions is locally to be brought into the system, the actual formation of the structures however takes place by independently running and by this qualitatively and timely highly efficient growth processes. 4.) A procedure is presented, which allows a local adsorption of molecules to ordered layers within a layer of other molecules and by this makes possible the formation of heterogeneous adsorbate layers.

  2. Spectroscopic fingerprints for charge localization in the organic semiconductor (DOEO)4[HgBr4]·TCE

    Science.gov (United States)

    Koplak, Oksana V.; Chernenkaya, Alisa; Medjanik, Katerina; Brambilla, Alberto; Gloskovskii, Andrei; Calloni, Alberto; Elmers, Hans-Joachim; Schönhense, Gerd; Ciccacci, Franco; Morgunov, Roman B.

    2015-05-01

    Changes of the electronic structure accompanied by charge localization and a transition to an antiferromagnetic ground state were observed in the organic semiconductor (DOEO)4[HgBr4]·TCE. Localization starts in the temperature region of about 150 K and the antiferromagnetic state occurs below 60 K. The magnetic moment of the crystal contains contributions of inclusions (droplets), and individual paramagnetic centers formed by localized holes and free charge carriers at 2 K. Two types of inclusions of 100-400 nm and 2-5 nm sizes were revealed by transmission electron microscopy. Studying the temperature- and angular dependence of electron spin resonance (ESR) spectra revealed fingerprints of antiferromagnetic contributions as well as paramagnetic resonance spectra of individual localized charge carriers. The results point on coexistence of antiferromagnetic long and short range order as evident from a second ESR line. Photoelectron spectroscopy in the VUV, soft and hard X-ray range shows temperature-dependent effects upon crossing the critical temperatures around 60 K and 150 K. The substantially different probing depths of soft and hard X-ray photoelectron spectroscopy yield information on the surface termination. The combined investigation using complementary methods at the same sample reveals the close relation of changes in the transport properties and in the energy distribution of electronic states.

  3. The Impact of Interlayer Electronic Coupling on Charge Transport in Organic Semiconductors: A Case Study on Titanylphthalocyanine Single Crystals.

    Science.gov (United States)

    Zhang, Zongpeng; Jiang, Lang; Cheng, Changli; Zhen, Yonggang; Zhao, Guangyao; Geng, Hua; Yi, Yuanping; Li, Liqiang; Dong, Huanli; Shuai, Zhigang; Hu, Wenping

    2016-04-18

    Traditionally, it is believed that three-dimensional transport networks are preferable to those of lower dimensions. We demonstrate that inter-layer electronic couplings may result in a drastic decrease of charge mobilities by utilizing field-effect transistors (FET) based on two phases of titanyl phthalocyanine (TiOPc) crystals. The α-phase crystals with electronic couplings along two dimensions show a maximum mobility up to 26.8 cm(2)  V(-1)  s(-1) . In sharp contrast, the β-phase crystals with extra significant inter-layer electronic couplings show a maximum mobility of only 0.1 cm(2)  V(-1)  s(-1) . Theoretical calculations on the bulk crystals and model slabs reveal that the inter-layer electronic couplings for the β-phase devices will diminish remarkably the device charge transport abilities owing to the coupling direction perpendicular to the current direction. This work provides new insights into the impact of the dimensionality and directionality of the packing arrangements on charge transport in organic semiconductors.

  4. Inverse spin Hall effect from pulsed spin current in organic semiconductors with tunable spin-orbit coupling.

    Science.gov (United States)

    Sun, Dali; van Schooten, Kipp J; Kavand, Marzieh; Malissa, Hans; Zhang, Chuang; Groesbeck, Matthew; Boehme, Christoph; Valy Vardeny, Z

    2016-08-01

    Exploration of spin currents in organic semiconductors (OSECs) induced by resonant microwave absorption in ferromagnetic substrates is appealing for potential spintronics applications. Owing to the inherently weak spin-orbit coupling (SOC) of OSECs, their inverse spin Hall effect (ISHE) response is very subtle; limited by the microwave power applicable under continuous-wave (cw) excitation. Here we introduce a novel approach for generating significant ISHE signals in OSECs using pulsed ferromagnetic resonance, where the ISHE is two to three orders of magnitude larger compared to cw excitation. This strong ISHE enables us to investigate a variety of OSECs ranging from π-conjugated polymers with strong SOC that contain intrachain platinum atoms, to weak SOC polymers, to C60 films, where the SOC is predominantly caused by the curvature of the molecule's surface. The pulsed-ISHE technique offers a robust route for efficient injection and detection schemes of spin currents at room temperature, and paves the way for spin orbitronics in plastic materials.

  5. Inverse spin Hall effect from pulsed spin current in organic semiconductors with tunable spin-orbit coupling

    Science.gov (United States)

    Sun, Dali; van Schooten, Kipp J.; Kavand, Marzieh; Malissa, Hans; Zhang, Chuang; Groesbeck, Matthew; Boehme, Christoph; Valy Vardeny, Z.

    2016-08-01

    Exploration of spin currents in organic semiconductors (OSECs) induced by resonant microwave absorption in ferromagnetic substrates is appealing for potential spintronics applications. Owing to the inherently weak spin-orbit coupling (SOC) of OSECs, their inverse spin Hall effect (ISHE) response is very subtle; limited by the microwave power applicable under continuous-wave (cw) excitation. Here we introduce a novel approach for generating significant ISHE signals in OSECs using pulsed ferromagnetic resonance, where the ISHE is two to three orders of magnitude larger compared to cw excitation. This strong ISHE enables us to investigate a variety of OSECs ranging from π-conjugated polymers with strong SOC that contain intrachain platinum atoms, to weak SOC polymers, to C60 films, where the SOC is predominantly caused by the curvature of the molecule’s surface. The pulsed-ISHE technique offers a robust route for efficient injection and detection schemes of spin currents at room temperature, and paves the way for spin orbitronics in plastic materials.

  6. Avoiding bias effects in NMR experiments for heteronuclear dipole-dipole coupling determinations: principles and application to organic semiconductor materials.

    Science.gov (United States)

    Kurz, Ricardo; Cobo, Marcio Fernando; de Azevedo, Eduardo Ribeiro; Sommer, Michael; Wicklein, André; Thelakkat, Mukundan; Hempel, Günter; Saalwächter, Kay

    2013-09-16

    Carbon-proton dipole-dipole couplings between bonded atoms represent a popular probe of molecular dynamics in soft materials or biomolecules. Their site-resolved determination, for example, by using the popular DIPSHIFT experiment, can be challenged by spectral overlap with nonbonded carbon atoms. The problem can be solved by using very short cross-polarization (CP) contact times, however, the measured modulation curves then deviate strongly from the theoretically predicted shape, which is caused by the dependence of the CP efficiency on the orientation of the CH vector, leading to an anisotropic magnetization distribution even for isotropic samples. Herein, we present a detailed demonstration and explanation of this problem, as well as providing a solution. We combine DIPSHIFT experiments with the rotor-directed exchange of orientations (RODEO) method, and modifications of it, to redistribute the magnetization and obtain undistorted modulation curves. Our strategy is general in that it can also be applied to other types of experiments for heteronuclear dipole-dipole coupling determinations that rely on dipolar polarization transfer. It is demonstrated with perylene-bisimide-based organic semiconductor materials, as an example, in which measurements of dynamic order parameters reveal correlations of the molecular dynamics with the phase structure and functional properties.

  7. Simultaneous transferring and reserving of solar energy as electrical energy in a single organic semiconductor structure

    Energy Technology Data Exchange (ETDEWEB)

    Sengor, T. [Yildiz Technical Univ., Istanbul (Turkey)

    1995-07-01

    Thin and thick films of a doped organic material, referred to as CHLOH, on a special pair of inorganic substrates are investigated experimentally. The final product simultaneously converts and stores radiated energy, such as solar energy. The stability and efficiency of the new thick film structure has been tested since 1984 and the results illustrate that it is useful as an alternative energy source. The other aspect of the material being investigated is the application of a thin CHLOH layer as an active element in optoelectronic devices.

  8. Organic-inorganic semiconductor hybrid systems. Structure, morphology, and electronic properties

    Energy Technology Data Exchange (ETDEWEB)

    El Helou, Mira

    2012-08-22

    This dissertation addresses the preparation and characterization of hybrid semiconducting systems combining organic with inorganic materials. Characterization methods used included to determine the structure, morphology, and thermal stability comprised X-ray diffraction (XRD), atomic force microscopy (AFM), thermal desorption spectroscopy (TDS), and X-ray photoelectron spectroscopy (XPS). One organic-inorganic semiconducting system was pentacene (C{sub 22}H{sub 14}) and zinc oxide. This interface was investigated in detail for pentacene on an oxygen-terminated zinc oxide surface, i.e. ZnO(000 anti 1). An extended study on the promising p-n junction was carried out for pentacene on ZnO with different orientations which exhibit different chemical and structural characteristics: ZnO(000 anti 1), ZnO(0001), and ZnO(10 anti 10). Moreover, the organic crystal structure of pentacene was selectively tuned by carefully choosing the substrate temperature. This defined interface with a physisorbed pentacene layer on ZnO was characterized by optical absorption which depends on the temperature of the measured system, the pentacene film thickness, and the molecular orientation and packing. The high quality of the pentacene films allowed in one case to characterize the Davydov splitting by linear polarized light focused on a single crystallite. Another subject in the field of organic-inorganic hybrid materials comprised conjugated dithiols used as self-assembled monolayers (SAMs) for immobilizing semiconducting CdS nanoparticles (NPs) on Au substrates. It was demonstrated that an appropriate selection and preparation of the conjugated SAMs is crucial for building up a light-addressable potentiometric sensor with a sufficient efficiency. An optimized electron transfer was achieved with SAMs of long range ordering, high stability, and adequate conductivity. This was examined for different linkers and was best for stilbenedithiol immobilized in solution at higher temperatures. Due

  9. Nanostructured Silver Substrates With Stable and Universal SERS Properties: Application to Organic Molecules and Semiconductor Nanoparticles

    Directory of Open Access Journals (Sweden)

    Waurisch C

    2009-01-01

    Full Text Available Abstract Nanostructured silver films have been prepared by thermal deposition on silicon, and their properties as SERS substrates investigated. The optimal conditions of the post-growth annealing of the substrates were established. Atomic force microscopy study revealed that the silver films with relatively dense and homogeneous arrays of 60–80-nm high pyramidal nanoislands are the most efficient for SERS of both organic dye and inorganic nanoparticles analytes. The noticeable enhancement of the Raman signal from colloidal nanoparticles with the help of silver island films is reported for the first time.

  10. Preparation and operation characteristics of organic semiconductor transistor using thin film Al gate and copper phthalocyanine

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The organic static induction transistors (OSITs) are fabricated by the method of evaporating and plating in a vacuum with copper phthalocyanine (CuPc) dye, and has a five layered structure of Au/CuPc/AL/CuPc/Au. The experiment reveals that OSITs have obtained a low driving voltage, high current density and high switch speed such as IDs = 1.2 × 10-6A/mm2 , and the degree of 1 000 Hz. The OSITs have excellent operation characteristics of typical static induction transistors.

  11. Semiconductor statistics

    CERN Document Server

    Blakemore, J S

    1987-01-01

    In-depth exploration of the implications of carrier populations and Fermi energies examines distribution of electrons in energy bands and impurity levels of semiconductors. Also: kinetics of semiconductors containing excess carriers, particularly in terms of trapping, excitation, and recombination.

  12. A theoretical description of charge reorganization energies in molecular organic P-type semiconductors.

    Science.gov (United States)

    Brückner, Charlotte; Engels, Bernd

    2016-06-05

    Charge transport properties of materials composed of small organic molecules are important for numerous optoelectronic applications. A material's ability to transport charges is considerably influenced by the charge reorganization energies of the composing molecules. Hence, predictions about charge-transport properties of organic materials deserve reliable statements about these charge reorganization energies. However, using density functional theory which is mostly used for the predictions, the computed reorganization energies depend strongly on the chosen functional. To gain insight, a benchmark of various density functionals for the accurate calculation of charge reorganization energies is presented. A correlation between the charge reorganization energies and the ionization potentials is found which suggests applying IP-tuning to obtain reliable values for charge reorganization energies. According to benchmark investigations with IP-EOM-CCSD single-point calculations, the tuned functionals provide indeed more reliable charge reorganization energies. Among the standard functionals, ωB97X-D and SOGGA11X yield accurate charge reorganization energies in comparison with IP-EOM-CCSD values. © 2016 Wiley Periodicals, Inc.

  13. Charge carrier mobilities in organic semiconductor crystals based on the spectral overlap.

    Science.gov (United States)

    Stehr, Vera; Fink, Reinhold F; Deibel, Carsten; Engels, Bernd

    2016-09-05

    The prediction of substance-related charge-transport properties is important for the tayloring of new materials for organic devices, such as organic solar cells. Assuming a hopping process, the Marcus theory is frequently used to model charge transport. Here another approach, which is already widely used for exciton transport, is adapted to charge transport. It is based on the spectral overlap of the vibrational donor and acceptor spectra. As the Marcus theory it is derived from Fermi's Golden rule, however, it contains less approximations, as the molecular vibrations are treated quantum mechanically. In contrast, the Marcus theory reduces all vibrational degrees of freedom to one and treats its influence classically. The approach is tested on different acenes and predicts most of the experimentally available hole mobilities in these materials within a factor of 2. This represents a significant improvement to values obtained from Marcus theory which is qualitatively correct but frequently overestimates the mobilities by factors up to 10. Furthermore, the charge-transport properties of two derivatives of perylene bisimide are investigated. © 2016 Wiley Periodicals, Inc.

  14. Semiconductor Behavior of a Three-Dimensional Strontium-Based Metal-Organic Framework.

    Science.gov (United States)

    Usman, Muhammad; Mendiratta, Shruti; Batjargal, Sainbileg; Haider, Golam; Hayashi, Michitoshi; Rao Gade, Narsinga; Chen, Jenq-Wei; Chen, Yang-Fang; Lu, Kuang-Lieh

    2015-10-21

    The self-assembly of a three-dimensional strontium-based metal-organic framework [Sr(Hbtc)(H2O)]n (1) was achieved through the reaction of Sr(NO3)2 with a 1,2,4-benzenetricarboxylic acid (1,2,4-H3btc) ligand under hydrothermal conditions. This Sr-based metal-organic framework exhibits remarkable semiconducting behavior, as evidenced by theoretical calculations and experimental measurements. Temperature-dependent DC conductivity, near-room-temperature AC conductivity, diffuse reflection spectra, and photoluminescence spectra provide strong proof that compound 1 shows a band gap of 2.3 eV, which is comparable to that for other commonly available semiconducting materials (e.g., CdSe, CdTe, ZnTe, GaP, etc.). The optimized molecular structure and electronic properties (density of states and band gap energy) of 1 were calculated using density functional theory, and the results are consistent with experimental findings. This is the first report on the semiconducting properties of a strontium-based MOF, which will pave the way for further studies in semiconducting MOFs with interesting potential applications in optoelectronic devices.

  15. Importance of surface modification of a microcontact stamp for pattern fidelity of soluble organic semiconductors

    Science.gov (United States)

    Park, Hea-Lim; Lee, Bo-Yeon; Kim, Se-Um; Suh, Jeng-Hun; Kim, Min-Hoi; Lee, Sin-Doo

    2016-01-01

    We described the effect of the ultraviolet ozone (UVO) treatment of a polydimethylsiloxane (PDMS) stamp on the fidelity of 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-PEN) patterns produced from a TIPS-PEN/polymer blend by selective contact evaporation (SCE). During the SCE process, the TIPS-PEN in contact with the nanoporous PDMS was absorbed into the PDMS stamp, leaving out the TIPS-PEN patterns, complementary to the PDMS patterns, in the noncontact regions. For the case of the untreated, hydrophobic PDMS surface, the TIPS-PEN patterns developed initially were shrunken and eventually disappeared after 24 h due to the steady absorption of the TIPS-PEN in time. In contrast, for the UVO-treated case, the TIPS-PEN patterns were found to maintain the initial shapes over the period of 24 h since the absorption of the TIPS-PEN was limited by the hydrophilic nature of the UVO-treated PDMS. The modified PDMS surface by the UVO for 30 min yielded the highest fidelity of the TIPS-PEN patterns in both height and width. The patterned TIPS-PEN layer by the SCE was implemented into an organic field-effect transistor to demonstrate the viability of the SCE combined with the UVO treatment for solution-processed organic electronic devices.

  16. Absorption and scattering effects by silver nanoparticles near the interface of organic/inorganic semiconductor tandem films

    Energy Technology Data Exchange (ETDEWEB)

    Nemes, Coleen T.; Vijapurapu, Divya K.; Petoukhoff, Christopher E.; Cheung, Gary Z.; O' Carroll, Deirdre M., E-mail: ocarroll@rutgers.edu [Rutgers University, Department of Materials Science and Engineering (United States)

    2013-08-15

    nanoparticles placed near an organic/inorganic interface can be employed for light management in tandem or hybrid organic/inorganic thin-film semiconductor configurations for solar energy harvesting applications or light detection applications.

  17. Morphological control of anodic crystalline TiO{sub 2} nanochannel films for use in size-selective photocatalytic decomposition of organic molecules

    Energy Technology Data Exchange (ETDEWEB)

    Tsuji, E., E-mail: e-tsuji@eng.hokudai.ac.jp [Graduate School of Chemical Sciences and Engineering, Hokkaido University, Sapporo, Hokkaido 060-8628 (Japan); Division of Materials Chemistry, Faculty of Engineering, Hokkaido University, Sapporo, Hokkaido 060-8628 (Japan); Taguchi, Y. [Graduate School of Chemical Sciences and Engineering, Hokkaido University, Sapporo, Hokkaido 060-8628 (Japan); Aoki, Y. [Graduate School of Chemical Sciences and Engineering, Hokkaido University, Sapporo, Hokkaido 060-8628 (Japan); Division of Materials Chemistry, Faculty of Engineering, Hokkaido University, Sapporo, Hokkaido 060-8628 (Japan); Hashimoto, T.; Skeldon, P.; Thompson, G.E. [Corrosion and Protection Centre, School of Materials, The University of Manchester, Manchester, M13 9PL England (United Kingdom); Habazaki, H. [Graduate School of Chemical Sciences and Engineering, Hokkaido University, Sapporo, Hokkaido 060-8628 (Japan); Division of Materials Chemistry, Faculty of Engineering, Hokkaido University, Sapporo, Hokkaido 060-8628 (Japan)

    2014-05-01

    Graphical abstract: - Highlights: • The crystalline TiO{sub 2} nanochannel films were formed by anodizing titanium at 20 V in glycerol electrolyte containing various amounts of K{sub 3}PO{sub 4}, K{sub 2}HPO{sub 4} and KH{sub 2}PO{sub 4} at 433 K. • The growth rate of the films increased with an increase in the basicity of the electrolyte, leading to highly ordered nanochannel structures (the pore size was as small as ∼10 nm). • Size-selective photocatalytic decomposition for small organic molecules was achieved by utilizing the highly ordered TiO{sub 2} nanochannel films. - Abstract: We report the size-selective photocatalytic decomposition of organic molecules using crystalline anodic TiO{sub 2} nanochannel films as the photocatalyst. The porous TiO{sub 2} films were formed by anodizing titanium at 20 V in glycerol electrolyte containing various amounts of K{sub 3}PO{sub 4}, K{sub 2}HPO{sub 4}, and KH{sub 2}PO{sub 4} at 433 K. Regardless of the electrolyte composition, the as-formed TiO{sub 2} films had a crystalline anatase structure. The basicity of the electrolyte markedly influenced the morphology of the TiO{sub 2} nanochannel films; more regular nanochannels developed with increasing basicity of the electrolyte. Because the diameter of the nanochannels in the films formed in a basic electrolyte was as small as ∼10 nm, the anodic TiO{sub 2} nanochannel films with a thickness of 5 μm revealed a selective photocatalytic decomposition of methylene blue (MB) in a mixture of MB and direct red 80 (DR) kept under UV irradiation. The importance of the diameter of the nanochannels and their uniformity for size-selective decomposition of organic molecules were investigated.

  18. Time-resolved spin-dependent processes in magnetic field effects in organic semiconductors

    Science.gov (United States)

    Peng, Qiming; Li, Xianjie; Li, Feng

    2012-12-01

    We investigated the time-resolved magnetic field effects (MFEs) in tri-(8-hydroxyquinoline)-aluminum (Alq3) based organic light-emitting diodes (OLEDs) through the transient electroluminescence (EL) method. The values of magneto-electroluminescence (MEL) decrease with the time, and the decreasing slope is proportional to the driving voltage. Specifically, negative MELs are seen when the driving voltage is high enough (V > 11 V). We propose a model to elucidate the spin-dependent processes and theoretically simulate the time-resolved MELs. In particular, this dynamic analysis of time-resolved MELs reveals that the intersystem crossing between singlet and triplet electron-hole pairs and the triplet-triplet annihilation are responsible for the time-resolved MELs at the beginning and enduring periods of the pulse, respectively.

  19. Physical Modeling of Activation Energy in Organic Semiconductor Devices based on Energy and Momentum Conservations.

    Science.gov (United States)

    Mao, Ling-Feng; Ning, H; Hu, Changjun; Lu, Zhaolin; Wang, Gaofeng

    2016-04-22

    Field effect mobility in an organic device is determined by the activation energy. A new physical model of the activation energy is proposed by virtue of the energy and momentum conservation equations. The dependencies of the activation energy on the gate voltage and the drain voltage, which were observed in the experiments in the previous independent literature, can be well explained using the proposed model. Moreover, the expression in the proposed model, which has clear physical meanings in all parameters, can have the same mathematical form as the well-known Meyer-Neldel relation, which lacks of clear physical meanings in some of its parameters since it is a phenomenological model. Thus it not only describes a physical mechanism but also offers a possibility to design the next generation of high-performance optoelectronics and integrated flexible circuits by optimizing device physical parameter.

  20. Physical Modeling of Activation Energy in Organic Semiconductor Devices based on Energy and Momentum Conservations

    Science.gov (United States)

    Mao, Ling-Feng; Ning, H.; Hu, Changjun; Lu, Zhaolin; Wang, Gaofeng

    2016-04-01

    Field effect mobility in an organic device is determined by the activation energy. A new physical model of the activation energy is proposed by virtue of the energy and momentum conservation equations. The dependencies of the activation energy on the gate voltage and the drain voltage, which were observed in the experiments in the previous independent literature, can be well explained using the proposed model. Moreover, the expression in the proposed model, which has clear physical meanings in all parameters, can have the same mathematical form as the well-known Meyer-Neldel relation, which lacks of clear physical meanings in some of its parameters since it is a phenomenological model. Thus it not only describes a physical mechanism but also offers a possibility to design the next generation of high-performance optoelectronics and integrated flexible circuits by optimizing device physical parameter.

  1. Side-Chain-Induced Rigid Backbone Organization of Polymer Semiconductors through Semifluoroalkyl Side Chains.

    Science.gov (United States)

    Kang, Boseok; Kim, Ran; Lee, Seon Baek; Kwon, Soon-Ki; Kim, Yun-Hi; Cho, Kilwon

    2016-03-23

    While high-mobility p-type conjugated polymers have been widely reported, high-mobility n-type conjugated polymers are still rare. In the present work, we designed semifluorinated alkyl side chains and introduced them into naphthalene diimide-based polymers (PNDIF-T2 and PNDIF-TVT). We found that the strong self-organization of these side chains induced a high degree of order in the attached polymer backbones by forming a superstructure composed of "backbone crystals" and "side-chain crystals". This phenomenon was shown to greatly enhance the ordering along the backbone direction, and the resulting polymers thus exhibited unipolar n-channel transport in field-effect transistors with remarkably high electron mobility values of up to 6.50 cm(2) V(-1) s(-1) and with a high on-off current ratio of 10(5).

  2. Accurate on-chip measurement of the Seebeck coefficient of high mobility small molecule organic semiconductors

    Directory of Open Access Journals (Sweden)

    C. N. Warwick

    2015-09-01

    Full Text Available We present measurements of the Seebeck coefficient in two high mobility organic small molecules, 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT and 2,9-didecyl-dinaphtho[2,3-b:2′,3′-f]thieno[3,2-b]thiophene (C10-DNTT. The measurements are performed in a field effect transistor structure with high field effect mobilities of approximately 3 cm2/V s. This allows us to observe both the charge concentration and temperature dependence of the Seebeck coefficient. We find a strong logarithmic dependence upon charge concentration and a temperature dependence within the measurement uncertainty. Despite performing the measurements on highly polycrystalline evaporated films, we see an agreement in the Seebeck coefficient with modelled values from Shi et al. [Chem. Mater. 26, 2669 (2014] at high charge concentrations. We attribute deviations from the model at lower charge concentrations to charge trapping.

  3. Photoelectrical stimulation of neuronal cells by an organic semiconductor-electrolyte Interface

    DEFF Research Database (Denmark)

    Abdullaeva, Oliya S.; Schulz, Matthias; Balzer, Frank

    2016-01-01

    As a step toward the realization of neuroprosthetics for vision restoration, we follow an electrophysiological patch-clamp approach to study the fundamental photoelectrical stimulation mechanism of neuronal model cells by an organic semiconductor–electrolyte interface. Our photoactive layer...... consisting of an anilino-squaraine donor blended with a fullerene acceptor is supporting the growth of the neuronal model cell line (N2A cells) without an adhesion layer on it and is not impairing cell viability. The transient photocurrent signal upon illumination from the semiconductor–electrolyte layer...... is able to trigger a passive response of the neuronal cells under physiological conditions via a capacitive coupling mechanism. We study the dynamics of the capacitive transmembrane currents by patch-clamp recordings and compare them to the dynamics of the photocurrent signal and its spectral responsivity...

  4. Ultrafast Electron Transfer at Organic Semiconductor Interfaces: Importance of Molecular Orientation

    KAUST Repository

    Ayzner, Alexander L.

    2015-01-02

    © 2014 American Chemical Society. Much is known about the rate of photoexcited charge generation in at organic donor/acceptor (D/A) heterojunctions overaged over all relative arrangements. However, there has been very little experimental work investigating how the photoexcited electron transfer (ET) rate depends on the precise relative molecular orientation between D and A in thin solid films. This is the question that we address in this work. We find that the ET rate depends strongly on the relative molecular arrangement: The interface where the model donor compound copper phthalocyanine is oriented face-on with respect to the fullerene C60 acceptor yields a rate that is approximately 4 times faster than that of the edge-on oriented interface. Our results suggest that the D/A electronic coupling is significantly enhanced in the face-on case, which agrees well with theoretical predictions, underscoring the importance of controlling the relative interfacial molecular orientation.

  5. Si nanowires organic semiconductor hybrid heterojunction solar cells toward 10% efficiency.

    Science.gov (United States)

    He, Lining; Jiang, Changyun; Wang, Hao; Lai, Donny; Rusli

    2012-03-01

    High-efficiency hybrid solar cells are fabricated using a simple approach of spin coating a transparent hole transporting organic small molecule, 2,2',7,7'-Tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (Spiro-OMeTAD) on silicon nanowires (SiNWs) arrays prepared by electroless chemical etching. The characteristics of the hybrid cells are investigated as a function of SiNWs length from 0.15 to 5 μm. A maximum average power conversion efficiency of 9.92% has been achieved from 0.35 μm length SiNWs cells, despite a 12% shadowing loss and the absence of antireflective coating and back surface field enhancement. It is found that enhanced aggregations in longer SiNWs limit the cell performance due to increased series resistance and higher carrier recombination in the shorter wavelength region. The effects of the Si substrate doping concentrations on the performance of the cells are also investigated. Cells with higher substrate doping concentration exhibit a significant drop in the incident photons-to-current conversion efficiency (IPCE) in the near infrared region. Nevertheless, a promising short circuit current density of 19 mA/cm(2) and IPCE peak of 57% have been achieved for a 0.9 μm length SiNWs cell fabricated on a highly doped substrate with a minority-carrier diffusion length of only 15 μm. The results suggest that such hybrid cells can potentially be realized using Si thin films instead of bulk substrates. This is promising towards realizing low-cost and high-efficiency SiNWs/organic hybrid solar cells.

  6. Role of impurities in determining the exciton diffusion length in organic semiconductors

    Science.gov (United States)

    Curtin, Ian J.; Blaylock, D. Wayne; Holmes, Russell J.

    2016-04-01

    The design and performance of organic photovoltaic cells is dictated, in part, by the magnitude of the exciton diffusion length (LD). Despite the importance of this parameter, there have been few investigations connecting LD and materials purity. Here, we investigate LD for the organic small molecule N,N'-bis(naphthalen-1-yl)-N,N'-bis(phenyl)-benzidine as native impurities are systematically removed from the material. Thin films deposited from the as-synthesized material yield a value for LD, as measured by photoluminescence quenching, of (3.9 ± 0.5) nm with a corresponding photoluminescence efficiency (ηPL) of (25 ± 1)% and thin film purity of (97.1 ± 1.2)%, measured by high performance liquid chromatography. After purification by thermal gradient sublimation, the value of LD is increased to (4.7 ± 0.5) nm with a corresponding ηPL of (33 ± 1)% and purity of (98.3 ± 0.8)%. Interestingly, a similar behavior is also observed as a function of the deposition boat temperature. Films deposited from the purified material at a high temperature give LD = (5.3 ± 0.8) nm with ηPL = (37 ± 1)% for films with a purity of (99.0 ± 0.3)% purity. Using a model of diffusion by Förster energy transfer, the variation of LD with purity is predicted as a function of ηPL and is in good agreement with measurements. The removal of impurities acts to decrease the non-radiative exciton decay rate and increase the radiative decay rate, leading to increases in both the diffusivity and exciton lifetime. The results of this work highlight the role of impurities in determining LD, while also providing insight into the degree of materials purification necessary to achieve optimized exciton transport.

  7. Blue to red electroluminescence emission from organic light-emitting diodes based on π-conjugated organic semiconductor materials

    Science.gov (United States)

    Sharbati, Mohammad Taghi; Panahi, Farhad; Nekoei, Abdo-Reza; Emami, Farzin; Niknam, Khodabakhsh

    2014-01-01

    Blue to red organic light-emitting diodes based on a series of newly synthesized distyrylbenzenes have been demonstrated. Their optical properties have been theoretically and experimentally studied in order to inquire into the substitution effects (such as electron-donating, electron-withdrawing, and steric hindrance) on the emission color. Density functional theory at B3LYP/6-311+G(d) level of calculation was employed to obtain the molecular structures and highest occupied molecular orbital and lowest unoccupied molecular orbital surfaces. Electroluminescence emission range of compounds could be tuned by changing the strength of the acceptor component and using push-pull and nonplanarity effects from 483 (blue) to 600 (red) nm.

  8. Laser printed organic semiconductor PQT-12 for bottom-gate organic thin-film transistors: Fabrication and characterization

    Science.gov (United States)

    Makrygianni, M.; Ainsebaa, A.; Nagel, M.; Sanaur, S.; Raptis, Y. S.; Zergioti, I.; Tsamakis, D.

    2016-12-01

    In this work, we report on the effect of laser printed Poly (3,3‴-didodecyl quarter thiophene) on its optical, structural and electrical properties for bottom-gate/bottom-contact organic thin-film transistors applications. This semiconducting π-conjugated polymer was solution-deposited (spin-coated) on a donor substrate and transferred by means of solid phase laser-induced forward transfer (LIFT) technique on SiO2/Si receiver substrates to form the active material. This article presents a detailed study of the electrical properties of the fabricated transistors by measuring the parasitic resistances for gold (Au) and platinum (Pt) as source-drain electrodes, for optimizing OTFTs in terms of contacts. In addition, X-ray diffraction patterns revealed that it is possible to control the polymer microstructure through the choice of solvent. Also, no significant change in polymer chain orientation was observed between two printed patterns at 90 and 130 mJ/cm2 as confirmed by Raman spectra. The results demonstrate hole mobility values of (2.6 ± 1.3) × 10-2 cm2/Vs, and lower parasitic resistance for dielectric surface roughness around 1.2 nm and Pt electrodes. Higher performances are correlated to i) the well-ordering of PQT-12 surface when a high-boiling-point solvent is used and ii) the less limitating Pt source/drain electrodes. This analytical study proves that solid phase LIFT printing is a reliable technology for the fabrication of thin, organic large area electronics in a well-defined manner.

  9. Effects of Charge-Transfer Excitons on the Photophysics of Organic Semiconductors

    Science.gov (United States)

    Hestand, Nicholas J.

    The field of organic electronics has received considerable attention over the past several years due to the promise of novel electronic materials that are cheap, flexible and light weight. While some devices based on organic materials have already emerged on the market (e.g. organic light emitting diodes), a deeper understanding of the excited states within the condensed phase is necessary both to improve current commercial products and to develop new materials for applications that are currently in the commercial pipeline (e.g. organic photovoltaics, wearable displays, and field effect transistors). To this end, a model for pi-conjugated molecular aggregates and crystals is developed and analyzed. The model considers two types of electronic excitations, namely Frenkel and charge-transfer excitons, both of which play a prominent role in determining the nature of the excited states within tightly-packed organic systems. The former consist of an electron-hole pair bound to the same molecule while in the later the electron and hole are located on different molecules. The model also considers the important nuclear reorganization that occurs when the system switches between electronic states. This is achieved using a Holstein-style Hamiltonian that includes linear vibronic coupling of the electronic states to the nuclear motion associated with the high frequency vinyl-stretching and ring-breathing modes. Analysis of the model reveals spectroscopic signatures of charge-transfer mediated J- and H-aggregation in systems where the photophysical properties are determined primarily by charge-transfer interactions. Importantly, such signatures are found to be sensitive to the relative phase of the intermolecular electron and hole transfer integrals, and the relative energy of the Frenkel and charge-transfer states. When the charge-transfer integrals are in phase and the energy of the charge-transfer state is higher than the Frenkel state, the system exhibits J

  10. Atomistic Models of Amorphous Semiconductors

    NARCIS (Netherlands)

    Jarolimek, K.

    2011-01-01

    Crystalline silicon is probably the best studied material, widely used by the semiconductor industry. The subject of this thesis is an intriguing form of this element namely amorphous silicon. It can contain a varying amount of hydrogen and is denoted as a-Si:H. It completely lacks the neat long

  11. Aggregation of Organic Semiconductors and Its Influence on Carrier Transport and Solar Cell Performance

    KAUST Repository

    Hu, Hanlin

    2017-08-28

    Photovoltaic technology based on solution-processable organic solar cells (OSCs) provides a promising route towards a low-cost strategy to address the sharply increasing energy demands worldwide. However, up to date, the vast majority of solar cell reports have been based on spin-cast BHJ layers. Spin coating is not compatible with high speed and scalable coating processes, such as blade-coating and slot-die coating, which require the nanoscale morphology to be reproduced in scalable coating methods. And tolerance for thicker BHJ films would also facilitate high speed scalable coating. In the first part of this thesis, we investigate how pre-aggregating the conjugated polymer in solution impacts the charge transport in polymer films. We use P3HT in a wide range of molecular weights in different solvents of common use in organic electronics to investigate how they impact the aggregation behavior in the ink and in the solid state. By deliberately disentangling polymer chains via sonication of the solution in the presence of solvophobic driving forces, we show a remarkable ability to tune aggregation, which directly impacts charge transport, as measured in the context of field effect transistors. The second part of this thesis looks at the impact of the solution-coating method and the photovoltaic performance gap when applying modern BHJ inks developed for spin coating to scalable coating methods, namely blade coating. We ascribe this to significant differences in the drying kinetics between the processes. Emulating the drying kinetics of spin-coating was found to result in performance parity as well as morphological parity across several systems, resulting in demonstration of PTB7:PC71BM solar cells with efficiency of 9% and 6.5% PCEs on glass and flexible PET substrates, respectively. The last part of this thesis looks into going beyond performance parity by leveraging the differences of the scalable coating method to enable highly efficient thick solar cells which

  12. A Passively Mode-Locked Diode-End-Pumped Nd:YAG Laser with a Semiconductor Saturable Absorber Mirror Grown by Metal Organic Chemical Vapour Deposition

    Institute of Scientific and Technical Information of China (English)

    王勇刚; 马骁宇; 李春勇; 张治国; 张丙元; 张志刚

    2003-01-01

    We report the experimental results of a mode-locked diode-end-pumped Nd:YAG laser with a semiconductor saturable absorber mirror(SESAM)from which we achieved a 10ps pulse duration at 150MHz repetition rate.The SESAM was grown by metal organic chemical vapour deposition at low temperature.The recovery time was measured to be 0.5 ps,indicating the potential pulse compression to sub-picoseconds.

  13. Position-controlled III-V compound semiconductor nanowire solar cells by selective-area metal-organic vapor phase epitaxy.

    Science.gov (United States)

    Fukui, Takashi; Yoshimura, Masatoshi; Nakai, Eiji; Tomioka, Katsuhiro

    2012-01-01

    We demonstrate position-controlled III-V semiconductor nanowires (NWs) by using selective-area metal-organic vapor phase epitaxy and their application to solar cells. Efficiency of 4.23% is achieved for InP core-shell NW solar cells. We form a 'flexible NW array' without a substrate, which has the advantage of saving natural resources over conventional thin film photovoltaic devices. Four junction NW solar cells with over 50% efficiency are proposed and discussed.

  14. Localized photovoltaic investigations on organic semiconductors and bulk heterojunction solar cells.

    Science.gov (United States)

    Kollender, Jan Philipp; Gasiorowski, Jacek; Sariciftci, Niyazi Serdar; Mardare, Andrei Ionut; Hassel, Achim Walter

    2014-10-01

    Newly synthesized organic electronics materials are often available in submicrogram amounts only. Photoelectrochemical scanning droplet cell microscopy is a powerful method that allows a comprehensive characterisation of such small amounts including oxidation, reduction potentials, doping, determination of charge carriers, band gap, charge capacity, over-oxidation sensitivity and many more. Localized photoelectrochemical characterization of the poly[4,8-bis-substituted-benzo[1,2-b:4,5-b0]dithiophene-2,6-diyl-alt-4-substituted-thieno [3,4-b] thiophene-2,6-diyl] (PBDTTT-c) and PBDTTT-c:PCBM bulk heterojunction was performed using photoelectrochemical scanning droplet cell microscopy (PE-SDCM). The optical properties and the real and imaginary part of the dielectric function, of the polymer were determined using spectroscopic ellipsometry. The photoelectrochemical characterizations were performed in a three and two electrode configuration of PE-SDCM under laser and white light illumination. The effect of illumination was characterized using dark/illumination sequences. The stability of the photocurrent was studied using longer term (600 s) illumination. Finally the effect of cell configuration and illumination conditions on the photovoltage was studied.

  15. Effect of polaron diffusion on exciton-polaron quenching in disordered organic semiconductors

    Science.gov (United States)

    Coehoorn, R.; Zhang, L.; Bobbert, P. A.; van Eersel, H.

    2017-04-01

    Exciton-polaron quenching (EPQ) is a major efficiency loss process in organic optoelectronic devices, in particular at high excitation densities. Within commonly used models, the rate is assumed to be given by the product of the exciton density, the polaron density, and a constant EPQ rate coefficient, which is proportional to the polaron diffusion coefficient and an EPQ capture radius. In this work, we study the effects of polaron diffusion on the EPQ rate in energetically disordered materials with a Gaussian density of states using kinetic Monte Carlo simulations, and show that the effective rate coefficient can depend strongly on the polaron concentration and on the electric field. We furthermore find that under realistic conditions, the effective value of the capture radius can exceed the expected value of ˜1 nm by up to two orders of magnitude. To a first approximation, the simulation results can be understood from macroscopic diffusion theory, adapted at finite electric fields to include the observed "polaron wind" effect. However, for strongly disordered systems we find distinct deviations from that theory, related to the very small time and spatial scales involved in the capture process.

  16. Orthogonal Ambipolar Semiconductor Nanostructures for Complementary Logic Gates.

    Science.gov (United States)

    Huang, Weiguo; Markwart, Jens C; Briseno, Alejandro L; Hayward, Ryan C

    2016-09-27

    We report orthogonal ambipolar semiconductors that exhibit hole and electron transport in perpendicular directions based on aligned films of nanocrystalline "shish-kebabs" containing poly(3-hexylthiophene) (P3HT) and N,N'-di-n-octyl-3,4,9,10-perylenetetracarboxylic diimide (PDI) as p- and n-type components, respectively. Polarized optical microscopy, scanning electron microscopy, and X-ray diffraction measurements reveal a high degree of in-plane alignment. Relying on the orientation of interdigitated electrodes to enable efficient charge transport from either the respective p- or n-channel materials, we demonstrate semiconductor films with high anisotropy in the sign of charge carriers. Films of these aligned crystalline semiconductors were used to fabricate complementary inverter devices, which exhibited good switching behavior and a high noise margin of 80% of 1/2 Vdd. Moreover, complementary "NAND" and "NOR" logic gates were fabricated and found to exhibit excellent voltage transfer characteristics and low static power consumption. The ability to optimize the performance of these devices, simply by adjusting the solution concentrations of P3HT and PDI, makes this a simple and versatile method for preparing ambipolar organic semiconductor devices and high-performance logic gates. Further, we demonstrate that this method can also be applied to mixtures of PDI with another conjugated polymer, poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene]) (PBTTT), with better hole transport characteristics than P3HT, opening the door to orthogonal ambipolar semiconductors with higher performance.

  17. Local Intermolecular Order Controls Photoinduced Charge Separation at Donor/Acceptor Interfaces in Organic Semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Feier, Hilary M.; Reid, Obadiah G.; Pace, Natalie A.; Park, Jaehong; Bergkamp, Jesse J.; Sellinger, Alan; Gust, Devens; Rumbles, Garry

    2016-03-23

    How free charge is generated at organic donor-acceptor interfaces is an important question, as the binding energy of the lowest energy (localized) charge transfer states should be too high for the electron and hole to escape each other. Recently, it has been proposed that delocalization of the electronic states participating in charge transfer is crucial, and aggregated or otherwise locally ordered structures of the donor or the acceptor are the precondition for this electronic characteristic. The effect of intermolecular aggregation of both the polymer donor and fullerene acceptor on charge separation is studied. In the first case, the dilute electron acceptor triethylsilylhydroxy-1,4,8,11,15,18,22,25-octabutoxyphthalocyaninatosilicon(IV) (SiPc) is used to eliminate the influence of acceptor aggregation, and control polymer order through side-chain regioregularity, comparing charge generation in 96% regioregular (RR-) poly(3-hexylthiophene) (P3HT) with its regiorandom (RRa-) counterpart. In the second case, ordered phases in the polymer are eliminated by using RRa-P3HT, and phenyl-C61-butyric acid methyl ester (PC61BM) is used as the acceptor, varying its concentration to control aggregation. Time-resolved microwave conductivity, time-resolved photoluminescence, and transient absorption spectroscopy measurements show that while ultrafast charge transfer occurs in all samples, long-lived charge carriers are only produced in films with intermolecular aggregates of either RR-P3HT or PC61BM, and that polymer aggregates are just as effective in this regard as those of fullerenes.

  18. Optical properties of organic semiconductor thin films. Static spectra and real-time growth studies

    Energy Technology Data Exchange (ETDEWEB)

    Heinemeyer, Ute

    2009-07-20

    The aim of this work was to establish the anisotropic dielectric function of organic thin films on silicon covered with native oxide and to study their optical properties during film growth. While the work focuses mainly on the optical properties of Diindenoperylene (DIP) films, also the optical response of Pentacene (PEN) films during growth is studied for comparison. Spectroscopic ellipsometry and differential reflectance spectroscopy are used to determine the dielectric function of the films ex-situ and in-situ, i.e. in air and in ultrahigh vacuum. Additionally, Raman- and fluorescence spectroscopy is utilized to characterize the DIP films serving also as a basis for spatially resolved optical measurements beyond the diffraction limit. Furthermore, X-ray reflectometry and atomic force microscopy are used to determine important structural and morphological film properties. The absorption spectrum of DIP in solution serves as a monomer reference. The observed vibronic progression of the HOMO-LUMO transition allows the determination of the Huang-Rhys parameter experimentally, which is a measure of the electronic vibrational coupling. The corresponding breathing modes are measured by Raman spectroscopy. The optical properties of DIP films on native oxide show significant differences compared to the monomer spectrum due to intermolecular interactions. First of all, the thin film spectra are highly anisotropic due to the structural order of the films. Furthermore the Frenkel exciton transfer is studied and the energy difference between Frenkel and charge transfer excitons is determined. Real-time measurements reveal optical differences between interfacial or surface molecules and bulk molecules that play an important role for device applications. They are not only performed for DIP films but also for PEN films. While for DIP films on glass the appearance of a new mode is visible, the spectra of PEN show a pronounced energy red-shift during growth. It is shown how the

  19. Time resolved single molecule spectroscopy of semiconductor quantum dot/conjugated organic hybrid nanostructures

    Science.gov (United States)

    Odoi, Michael Yemoh

    Single molecule studies on CdSe quantum dots functionalized with oligo-phenylene vinylene ligands (CdSe-OPV) provide evidence of strong electronic communication that facilitate charge and energy transport between the OPV ligands and the CdSe quantum dot core. This electronic interaction greatly modify, the photoluminescence properties of both bulk and single CdSe-OPV nanostructure thin film samples. Size-correlated wide-field fluorescence imaging show that blinking suppression in single CdSe-OPV is linked to the degree of OPV coverage (inferred from AFM height scans) on the quantum dot surface. The effect of the complex electronic environment presented by photoexcited OPV ligands on the excited state property of CdSe-OPV is measured with single photon counting and photon-pair correlation spectroscopy techniques. Time-tagged-time-resolved (TTTR) single photon counting measurements from individual CdSe-OPV nanostructures, show excited state lifetimes an order of magnitude shorter relative to conventional ZnS/CdSe quantum dots. Second-order intensity correlation measurements g(2)(tau) from individual CdSe-OPV nanostructures point to a weak multi-excitonic character with a strong wavelength dependent modulation depth. By tuning in and out of the absorption of the OPV ligands we observe changes in modulation depth from g(2) (0) ≈ 0.2 to 0.05 under 405 and 514 nm excitation respectively. Defocused images and polarization anisotropy measurements also reveal a well-defined linear dipole emission pattern in single CdSe-OPV nanostructures. These results provide new insights into to the mechanism behind the electronic interactions in composite quantum dot/conjugated organic composite systems at the single molecule level. The observed intensity flickering , blinking suppression and associated lifetime/count rate and antibunching behaviour is well explained by a Stark interaction model. Charge transfer from photo-excitation of the OPV ligands to the surface of the Cd

  20. In situ UV-visible absorption during spin-coating of organic semiconductors: A new probe for organic electronics and photovoltaics

    KAUST Repository

    Abdelsamie, Maged

    2014-01-01

    Spin-coating is the most commonly used technique for the lab-scale production of solution processed organic electronic, optoelectronic and photovoltaic devices. Spin-coating produces the most efficient solution-processed organic solar cells and has been the preferred approach for rapid screening and optimization of new organic semiconductors and formulations for electronic and optoelectronic applications, both in academia and in industrial research facilities. In this article we demonstrate, for the first time, a spin-coating experiment monitored in situ by time resolved UV-visible absorption, the most commonly used, simplest, most direct and robust optical diagnostic tool used in organic electronics. In the first part, we successfully monitor the solution-to-solid phase transformation and thin film formation of poly(3-hexylthiophene) (P3HT), the de facto reference conjugated polymer in organic electronics and photovoltaics. We do so in two scenarios which differ by the degree of polymer aggregation in solution, prior to spin-coating. We find that a higher degree of aggregation in the starting solution results in small but measurable differences in the solid state, which translate into significant improvements in the charge carrier mobility of organic field-effect transistors (OFET). In the second part, we monitor the formation of a bulk heterojunction photoactive layer based on a P3HT-fullerene blend. We find that the spin-coating conditions that lead to slower kinetics of thin film formation favour a higher degree of polymer aggregation in the solid state and increased conjugation length along the polymer backbone. Using this insight, we devise an experiment in which the spin-coating process is interrupted prematurely, i.e., after liquid ejection is completed and before the film has started to form, so as to dramatically slow the thin film formation kinetics, while maintaining the same thickness and uniformity. These changes yield substantial improvements to the