WorldWideScience

Sample records for crystalline optical materials

  1. Optical waveguides in hard crystalline materials

    NARCIS (Netherlands)

    Pollnau, M.

    2005-01-01

    The recent results of our research group and collaborators in the field of fabrication, characterization, and applications of optical waveguides in hard crystalline materials, specifically in sapphire and Ti:sapphire, are reviewed.

  2. Direct optical imaging of structural inhomogeneities in crystalline materials.

    Science.gov (United States)

    Grigorev, A M

    2016-05-10

    A method for optical imaging of structural inhomogeneities in crystalline materials is proposed, based on the differences in the optical properties of the structural inhomogeneity and the homogeneous material near the fundamental absorption edge of the crystalline material. The method can be used to detect defects in both semiconductors and insulators.

  3. Optical and Physical Applications of Photocontrollable Materials: Azobenzene-Containing and Liquid Crystalline Polymers

    Directory of Open Access Journals (Sweden)

    Takashi Fukuda

    2012-01-01

    Full Text Available Photocontrol of molecular alignment is an exceptionally-intelligent and useful strategy. It enables us to control optical coefficients, peripheral molecular alignments, surface relief structure, and actuation of substances by means of photoirradiation. Azobenzene-containing polymers and functionalized liquid crystalline polymers are well-known photocontrollable materials. In this paper, we introduce recent applications of these materials in the fields of mechanics, self-organized structuring, mass transport, optics, and photonics. The concepts in each application are explained based on the mechanisms of photocontrol. The interesting natures of the photocontrollable materials and the conceptual applications will stimulate novel ideas for future research and development in this field.

  4. The determination of the direction of the optic axis of uniaxial crystalline materials

    Science.gov (United States)

    Lock, J. A.; Schock, H. J.; Regan, C. A.

    1986-01-01

    The birefringence of crystalline substances in general, and of sapphire in particular, is described. A test is described whose purpose is to determine the direction of the optic axis of a cylindrically machined single crystal of sapphire. This test was performed on the NASA Lewis sapphire cylinder and it was found that the optic axis made an angle of 18 deg with the axis of symmetry of the cylinder.

  5. Photochemical stability of nonlinear optical chromophores in polymeric and crystalline materials.

    Science.gov (United States)

    Rezzonico, Daniele; Kwon, Seong-Ji; Figi, Harry; Kwon, O-Pil; Jazbinsek, Mojca; Günter, Peter

    2008-03-28

    We compare the photochemical stability of the nonlinear optical chromophore configurationally locked polyene 2-{3-[2-(4-dimethylaminophenyl)vinyl]-5,5-dimethylcyclohex-2-enylidene} malononitrile (DAT2) embedded in a polymeric matrix and in a single-crystalline configuration. The results show that, under resonant light excitations, the polymeric compound degrades through an indirect process, while the DAT2 crystal follows a slow direct process. We show that chromophores in a crystalline environment exhibit three orders of magnitude better photostability as compared to guest-host polymer composites.

  6. Amorphous and crystalline optical materials used as instruments for high gamma radiation doses estimations

    Energy Technology Data Exchange (ETDEWEB)

    Ioan, M-R., E-mail: razvan.ioan@nipne.ro

    2016-06-15

    Highlights: • The damage induced by gamma rays to optical materials was highlighted and quantified, using laser techniques. • Polarized light and the particularities of the laser light (monochromaticity, directionality and coherence) were used. • The correlation between the damage and the gamma rays absorbed dose was made. • The comparison between different types of optical materials and their dose related calibrations were made. • The uncertainty associated to the technique was determined. - Abstract: Nuclear radiation induce some changes to the structure of exposed materials. The main effect of ionizing radiation when interacting with optical materials is the occurrence of color centers, which are quantitatively proportional to the up-taken doses. In this paper, a relation between browning effect magnitude and dose values was found. Using this relation, the estimation of a gamma radiation dose can be done. By using two types of laser wavelengths (532 nm and 633 nm), the optical powers transmitted thru glass samples irradiated to different doses between 0 and 59.1 kGy, were measured and the associated optical browning densities were determined. The use of laser light gives the opportunity of using its particularities: monochromaticity, directionality and coherence. Polarized light was also used for enhancing measurements quality. These preliminary results bring the opportunity of using glasses as detectors for the estimation of the dose in a certain point in space and for certain energy, especially in particles accelerators experiments, where the occurred nuclear reactions are involving the presence of high gamma rays fields.

  7. An advanced regime of the anomalous acousto-optical interaction with tangential phase matching in crystalline materials

    Science.gov (United States)

    Shcherbakov, Alexandre S.; Arellanes, Adan O.

    2016-09-01

    Regime of effective non-collinear acousto-optical interaction with tangential phase matching had been identified and previously observed only in two limiting cases: in tellurium dioxide (TeO2) at low acoustic frequencies ( 60 MHz) and in rutile (TiO2) at ultra-high frequencies ( 5 GHz). Both these limits are motivated by optical properties of the chosen materials. Low frequencies in TeO2 admit designing a wide-aperture acousto-optical cell, but limit the frequency bandwidth. While an acousto-optical cell made of TiO2 has very small aperture and exhibits low spectral resolution due to the effect of linear acoustic attenuation. Instead of those limits, we propose an advanced regime of the anomalous acousto-optical interaction with tangential phase matching, which allows us varying the frequency range and optimizing all the performances (for instance, the spectral resolution) of a wide-aperture acousto-optical cell made of the chosen crystal, as the case requires. Recently, we had suggested and successfully tested experimentally the revealed additional degree of freedom, i.e. the action of the tilt angle within the refractive indices ellipsoids to manipulate by the performances of crystalline acousto-optical cells. Now, we consider an opportunity of refining this additional degree of freedom within those ellipsoids of crystalline acousto-optical cell through some declination of the acoustic beam. For our investigations, the lithium niobate (LiNbO3) and rutile (TiO2) crystals of about 5 cm length, operating with the slow-shear acoustic mode along the acoustic axes had been selected. The needed theoretical analysis, numerical estimations, and 3D-vector diagrams have been developed to reveal potential benefits of the proposed technique.

  8. Crystalline Bioceramic Materials

    Directory of Open Access Journals (Sweden)

    de Aza, P. N.

    2005-06-01

    Full Text Available A strong interest in the use of ceramics for biomedical engineering applications developed in the late 1960´s. Used initially as alternatives to metallic materials in order to increase the biocompatibility of implants, bioceramics have become a diverse class of biomaterials, presently including three basic types: relatively bioinert ceramics; bioactive or surface reactive bioceramics and bioresorbable ceramics. This review will only refer to bioceramics “sensus stricto”, it is to say, those ceramic materials constituted for nonmetallic inorganic compounds, crystallines and consolidated by thermal treatments of powders to high temperatures. Leaving bioglasses, glass-ceramics and biocements apart, since, although all of them are obtained by thermal treatments to high temperatures, the first are amorphous, the second are obtained by desvitrification of a glass and in them vitreous phase normally prevails on the crystalline phases and the third are consolidated by means of a hydraulic or chemical reaction to room temperature. A review of the composition, physiochemical properties and biological behaviour of the principal types of crystalline bioceramics is given, based on the literature data and on the own experience of the authors.

    A finales de los años sesenta se despertó un gran interés por el uso de los materiales cerámicos para aplicaciones biomédicas. Inicialmente utilizados como una alternativa a los materiales metálicos, con el propósito de incrementar la biocompatibilidad de los implantes, las biocerámicas se han convertido en una clase diversa de biomateriales, incluyendo actualmente tres tipos: cerámicas cuasi inertes; cerámicas bioactivas o reactivas superficialmente y cerámicas reabsorbibles o biodegradables. En la presente revisión se hace referencia a las biocerámicas en sentido estricto, es decir, a aquellos materiales constitutitos por compuestos inorgánicos no metálicos, cristalinos y consolidados

  9. Diffusion in porous crystalline materials

    NARCIS (Netherlands)

    Krishna, R.

    2012-01-01

    The design and development of many separation and catalytic process technologies require a proper quantitative description of diffusion of mixtures of guest molecules within porous crystalline materials. This tutorial review presents a unified, phenomenological description of diffusion inside meso-

  10. Liquid Crystalline Materials for Biological Applications.

    Science.gov (United States)

    Lowe, Aaron M; Abbott, Nicholas L

    2012-03-13

    Liquid crystals have a long history of use as materials that respond to external stimuli (e.g., electrical and optical fields). More recently, a series of investigations have reported the design of liquid crystalline materials that undergo ordering transitions in response to a range of biological interactions, including interactions involving proteins, nucleic acids, viruses, bacteria and mammalian cells. A central challenge underlying the design of liquid crystalline materials for such applications is the tailoring of the interface of the materials so as to couple targeted biological interactions to ordering transitions. This review describes recent progress toward design of interfaces of liquid crystalline materials that are suitable for biological applications. Approaches addressed in this review include the use of lipid assemblies, polymeric membranes containing oligopeptides, cationic surfactant-DNA complexes, peptide-amphiphiles, interfacial protein assemblies and multi-layer polymeric films.

  11. Investigations on growth morphology, bulk growth and crystalline perfection of L-threonine, an organic nonlinear optical material

    Energy Technology Data Exchange (ETDEWEB)

    Linet, J. Mary [Department of Physics, Loyola College, Nungambakkam, Chennai 600 034 (India); Das, S. Jerome, E-mail: sjeromedas2004@yahoo.co [Department of Physics, Loyola College, Nungambakkam, Chennai 600 034 (India)

    2010-09-15

    L-threonine single crystal was successfully grown from aqueous solution. The morphology of the grown crystal was compared with the predicted morphology using Bravais-Friedel-Donnay-Harker law and was found to be in good agreement with the predicted morphology. Good optical quality bulk single crystal of enhanced size has been grown using unidirectional crystal growth method. High-resolution X-ray analysis study resulted in a rocking curve with a full width half maximum of 20 arc sec exhibiting the good crystalline quality of the grown crystal. The optical transmission study shows 90% of transmission in the entire visible region that exhibits the good optical quality of the grown crystal. The mechanical properties were analyzed by Vicker's microhardness method.

  12. A novel class of nonlinear optical materials based on host-guest composites: zeolites as inorganic crystalline hosts.

    Science.gov (United States)

    Kim, Hyun Sung; Pham, Tung Cao Thanh; Yoon, Kyung Byung

    2012-05-16

    The demand for nonlinear optical (NLO) materials with exceptional NLO properties is very large, and hence the search for such materials should be continued not only to enhance their functions in current applications but also to help expedite the materialization of photonics in which photons instead of electrons are used for signal processing, transmission, and storage. This article summarizes the preparation, characteristics, and the future perspectives of novel second order nonlinear optical (2NLO) materials prepared by orientation-controlled incorporation of 2NLO molecules into zeolite channels and third order nonlinear optical (3NLO) materials prepared by compartmentalization of very small (<1.3 nm) PbS QDs within zeolite nanopores under different environments, and the novel chemistry newly unveiled during the preparation of novel zeolite based NLO materials. This journal is © The Royal Society of Chemistry 2012

  13. EXAFS studies of crystalline materials

    Energy Technology Data Exchange (ETDEWEB)

    Knapp, G.S.; Georgopoulos, P.

    1982-01-01

    The application of extended x-ray absorption fine structure (EXAFS) technique to the study of crystalline materials is discussed, and previously published work on the subject is reviewed with 46 references being cited. The theory of EXAFS, methods of data analysis, and the experimental techniques, including those based on synchrotron and laboratory facilities are all discussed. Absorption and fluorescence methods of detecting EXAFS also receive attention. (BLM)

  14. Electrical transport in crystalline phase change materials

    Energy Technology Data Exchange (ETDEWEB)

    Woda, Michael

    2012-01-06

    In this thesis, the electrical transport properties of crystalline phase change materials are discussed. Phase change materials (PCM) are a special class of semiconducting and metallic thin film alloys, typically with a high amount of the group five element antimony or the group six element tellurium, such as Ge{sub 2}Sb{sub 2}Te{sub 5}. The unique property portfolio of this material class makes it suitable for memory applications. PCMs reveal fast switching between two stable room-temperature phases (amorphous and crystalline) realized by optical laser or electrical current pulses in memory devices. Additionally, a pronounced property contrast in form of optical reflectivity and electrical conductivity between the amorphous and crystalline phase is the characteristic fingerprint of PCMs. The emerging electrical solid state memory PCRAM is a very promising candidate to replace Flash memory in the near future or to even become a universal memory, which is non-volatile and shows the speed and cyclability of DRAM. One of the main technological challenges is the switching process into the amorphous state, which is the most power demanding step. In order to reduce the switching power, the crystalline resistivity needs to be increased at a given voltage. Thus understanding and tayloring of this property is mandatory. In this work, first the technological relevance, i.e. optical and electrical memory concepts based on PCMs are introduced. Subsequently a description of the physical properties of PCMs in four categories is given. Namely, structure, kinetics, optical properties and electrical properties are discussed. Then important recent developments such as the identification of resonant bonding in crystalline PCMs and a property predicting coordination scheme are briefly reviewed. The following chapter deals with the theoretical background of electrical transport, while the next chapter introduces the experimental techniques: Sputtering, XRR, XRD, DSC, thermal annealing

  15. New Crystalline Materials for Nonlinear Frequency Conversion, Electro-Optic Modulation, and Mid-Infrared Gain Media

    Energy Technology Data Exchange (ETDEWEB)

    Adams, J

    2002-08-09

    New crystalline materials were investigated for applications in frequency conversion of near-infrared wavelengths and as gain media for tunable mid-infrared solid-state lasers. GaCa{sub 4}O(BO{sub 3}){sub 3} (GdCOB), YCa{sub 4}O(BO{sub 3}){sub 3} (YCOB), LaCa{sub 4}O(BO{sub 3}){sub 3} (LaCOB), and Gd{sub 0.275}Y{sub 0.725}Ca{sub 4}O(BO{sub 3}){sub 3} were characterized for frequency conversion of 1 {micro}m lasers. For type I doubling at 1064 nm, LaCOB, GdCOB, and YCOB were found to have effective coupling coefficients (d{sub eff}) of 0.52 {+-} 0.05, 0.78 {+-} 0.06, and 1.12 {+-} 0.07 pm/V, respectively. LaCOB was measured to have angular and thermal sensitivities of 1224 {+-} 184 (cm-rad){sup -1} and < 0.10 (cm-{sup o}C){sup -1}, respectively. The effective coupling coefficient for type II noncritically phasematched (NCPM) doubling at 1064 nm in Gd{sub 0.275}Y{sub 0.725}Ca{sub 4}O(BO{sub 3}){sub 3} was measured to be 0.37 {+-} 0.04 pm/V. We predict LaCOB to have a type I NCPM fundamental wavelength of 1042 {+-} 1.5 nm. Due to its low angular and thermal sensitivities for doubling near 1047 nm, LaCOB has potential for frequency doubling of high-average power Nd:LiYF{sub 4} and Yb:Sr{sub 5}(P0{sub 4}){sub 3}F lasers. LaCOB, GdCOB, and YCOB were also investigated for optical parametric oscillator applications and we determined that they may have potential in a Ti:sapphire pumped oscillator. The effective linear electro-optic coefficients (r{sub eff}) were measured along dielectric directions in YCOB and a maximum r{sub eff} of 10.8 pm/V was found. For a crystal with a 5:1 aspect ratio, the corresponding half-wave voltage at 1064 nm would be 19.6 kV. Therefore a Pockels cell composed of two YCOB crystals with 5:1 aspect ratios would have a required half-wave voltage <10 kV. Moderate coupling coefficients (3 x KH{sub 2}PO{sub 4}), low thermal sensitivities, ease of growth to large sizes, non-hygroscopicity, and favorable polishing and coating characteristics make La

  16. Nanosecond liquid crystalline optical modulator

    Energy Technology Data Exchange (ETDEWEB)

    Borshch, Volodymyr; Shiyanovskii, Sergij V.; Lavrentovich, Oleg D.

    2016-07-26

    An optical modulator includes a liquid crystal cell containing liquid crystal material having liquid crystal molecules oriented along a quiescent director direction in the unbiased state, and a voltage source configured to apply an electric field to the liquid crystal material wherein the direction of the applied electric field does not cause the quiescent director direction to change. An optical source is arranged to transmit light through or reflect light off the liquid crystal cell with the light passing through the liquid crystal material at an angle effective to undergo phase retardation in response to the voltage source applying the electric field. The liquid crystal material may have negative dielectric anisotropy, and the voltage source configured to apply an electric field to the liquid crystal material whose electric field vector is transverse to the quiescent director direction. Alternatively, the liquid crystal material may have positive dielectric anisotropy and the voltage source configured to apply an electric field to the liquid crystal material whose electric field vector is parallel with the quiescent director direction.

  17. Azobenzene liquid crystalline materials for efficient optical switching with pulsed and/or continuous wave laser beams.

    Science.gov (United States)

    Hrozhyk, Uladzimir A; Serak, Svetlana V; Tabiryan, Nelson V; Hoke, Landa; Steeves, Diane M; Kimball, Brian R

    2010-04-12

    This study compares optical switching capabilities of liquid crystal (LC) materials based on different classes of azobenzene dyes. LCs based on molecules containing benzene rings with nearly symmetrical pi-pi conjugation respond more efficiently to a cw beam than to a nanosecond laser pulse and maintain the changes induced by the beam for tens of hours. Using azo dye molecules containing two benzene rings with push-pull pi-pi conjugation we demonstrate high photosensitivity to both a cw beam as well as nanosecond laser pulse with only 1 s relaxation of light-induced changes in material properties. Even faster, 1 ms restoration time is obtained for azo dye molecules containing hetaryl (benzothiazole) ring with enhanced push-pull pi-pi conjugation. These materials respond most efficiently to pulsed excitation while discriminating cw radiation.

  18. Diffusion in porous crystalline materials.

    Science.gov (United States)

    Krishna, Rajamani

    2012-04-21

    The design and development of many separation and catalytic process technologies require a proper quantitative description of diffusion of mixtures of guest molecules within porous crystalline materials. This tutorial review presents a unified, phenomenological description of diffusion inside meso- and micro-porous structures. In meso-porous materials, with pore sizes 2 nm < d(p) < 50 nm, there is a central core region where the influence of interactions of the molecules with the pore wall is either small or negligible; meso-pore diffusion is governed by a combination of molecule-molecule and molecule-pore wall interactions. Within micro-pores, with d(p) < 2 nm, the guest molecules are always under the influence of the force field exerted with the wall and we have to reckon with the motion of adsorbed molecules, and there is no "bulk" fluid region. The characteristics and physical significance of the self-, Maxwell-Stefan, and Fick diffusivities are explained with the aid of data obtained either from experiments or molecular dynamics simulations, for a wide variety of structures with different pore sizes and topology. The influence of adsorption thermodynamics, molecular clustering, and segregation on both magnitudes and concentration dependences of the diffusivities is highlighted. In mixture diffusion, correlations in molecular hops have the effect of slowing-down the more mobile species. The need for proper modeling of correlation effects using the Maxwell-Stefan formulation is stressed with the aid of examples of membrane separations and catalytic reactors.

  19. Electronic processes in non-crystalline materials

    CERN Document Server

    Mott, Nevill Francis

    2012-01-01

    Since the first edition of this highly successful book the field saw many great developments both in experimental and theoretical studies of electrical properties of non-crystalline solids. It became necessary to rewrite nearly the whole book, while the aims of the second edition remained the same: to set out the theoretical concepts, to test them by comparison with experiment for a wide variety of phenomena, and to apply them to non-crystalline materials. Sir Nevill Mott shared the1977 Nobel Prize for Physics, awarded for his research work in this field. The reissue of this book as part of th

  20. Gyroscope based on a crystalline optical WGM microresonator (Conference Presentation)

    Science.gov (United States)

    Liang, Wei; Ilchenko, Vladimir S.; Eliyahu, Danny; Savchenkov, Anatoliy A.; Matsko, Andrey B.; Maleki, Lute

    2017-02-01

    We report on a study of performance of both active and passive optical gyroscopes based on high finesse crystalline whispering gallery mode (WGM) resonators. We show that the sensitivity of the devices is ultimately limited due to the nonlinearity of the resonator host material. A gyroscope characterized with 0.02 deg/hr^1/2 angle random walk and 2 deg/hr bias drift is demonstrated.

  1. Perhydroazulene-based liquid-crystalline materials with smectic phases.

    Science.gov (United States)

    Hussain, Zakir; Hopf, Henning; Eichhorn, S Holger

    2012-01-01

    New liquid-crystalline materials with a perhydroazulene core were synthesized and the stereochemistry of these compounds was investigated. The mesomorphic properties of the new LC compounds were investigated by differential scanning colorimetry, polarizing optical microscopy and X-ray diffraction. We report here on the LC properties of nonchiral materials, which predominantly exhibit smectic phases and display nematic phases only within narrow temperature ranges. The dependence of the mesogenic behavior of the new materials on the stereochemistry of the core system was also investigated. All newly synthesized compounds were fully characterized by the usual spectroscopic and analytical methods.

  2. Perhydroazulene-based liquid-crystalline materials with smectic phases

    Directory of Open Access Journals (Sweden)

    Zakir Hussain

    2012-03-01

    Full Text Available New liquid-crystalline materials with a perhydroazulene core were synthesized and the stereochemistry of these compounds was investigated. The mesomorphic properties of the new LC compounds were investigated by differential scanning colorimetry, polarizing optical microscopy and X-ray diffraction. We report here on the LC properties of nonchiral materials, which predominantly exhibit smectic phases and display nematic phases only within narrow temperature ranges. The dependence of the mesogenic behavior of the new materials on the stereochemistry of the core system was also investigated. All newly synthesized compounds were fully characterized by the usual spectroscopic and analytical methods.

  3. Liquid Crystalline Semiconductors Materials, properties and applications

    CERN Document Server

    Kelly, Stephen; O'Neill, Mary

    2013-01-01

    This is an exciting stage in the development of organic electronics. It is no longer an area of purely academic interest as increasingly real applications are being developed, some of which are beginning to come on-stream. Areas that have already been commercially developed or which are under intensive development include organic light emitting diodes (for flat panel displays and solid state lighting), organic photovoltaic cells, organic thin film transistors (for smart tags and flat panel displays) and sensors. Within the family of organic electronic materials, liquid crystals are relative newcomers. The first electronically conducting liquid crystals were reported in 1988 but already a substantial literature has developed. The advantage of liquid crystalline semiconductors is that they have the easy processability of amorphous and polymeric semiconductors but they usually have higher charge carrier mobilities. Their mobilities do not reach the levels seen in crystalline organics but they circumvent all of t...

  4. Optical diffraction studies of crystalline structures in electron micrographs. I. Theoretical considerations.

    Science.gov (United States)

    Berger, J E

    1969-12-01

    Determination of the unit cell of crystalline particles by optical diffraction analysis of electron micrographs may establish the identity and help in approximating the molecular weight of the substances contained in the crystal. This technique may be particularly helpful when isolation and purification of the crystalline material cannot be accomplished.

  5. Anisotropy-based crystalline oxide-on-semiconductor material

    Science.gov (United States)

    McKee, Rodney Allen; Walker, Frederick Joseph

    2000-01-01

    A semiconductor structure and device for use in a semiconductor application utilizes a substrate of semiconductor-based material, such as silicon, and a thin film of a crystalline oxide whose unit cells are capable of exhibiting anisotropic behavior overlying the substrate surface. Within the structure, the unit cells of the crystalline oxide are exposed to an in-plane stain which influences the geometric shape of the unit cells and thereby arranges a directional-dependent quality of the unit cells in a predisposed orientation relative to the substrate. This predisposition of the directional-dependent quality of the unit cells enables the device to take beneficial advantage of characteristics of the structure during operation. For example, in the instance in which the crystalline oxide of the structure is a perovskite, a spinel or an oxide of similarly-related cubic structure, the structure can, within an appropriate semiconductor device, exhibit ferroelectric, piezoelectric, pyroelectric, electro-optic, ferromagnetic, antiferromagnetic, magneto-optic or large dielectric properties that synergistically couple to the underlying semiconductor substrate.

  6. Side-chain liquid crystalline polyesters for optical information storage

    DEFF Research Database (Denmark)

    Ramanujam, P.S.; Holme, Christian; Hvilsted, Søren

    1996-01-01

    Azobenzene side-chain liquid crystalline polyester structures suitable for permanent optical storage are described. The synthesis and characterization of the polyesters together with differential scanning calorimetry and X-ray investigations are discussed. Optical anisotropic investigations...... and holographic storage in one particular polyester are described in detail and polarized Fourier transform infrared spectroscopic data complementing the optical data are presented. Optical and atomic force microscope investigations point to a laser-induced aggregation as responsible for permanent optical storage....

  7. Nonlinear optical materials.

    Science.gov (United States)

    Eaton, D F

    1991-07-19

    The current state of materials development in nonlinear optics is summarized, and the promise of these materials is critically evaluated. Properties and important materials constants of current commercial materials and of new, promising, inorganic and organic molecular and polymeric materials with potential in second- and third-order nonlinear optical applications are presented.

  8. A Hybrid Solid-State NMR and Electron Microscopy Structure-Determination Protocol for Engineering Advanced para-Crystalline Optical Materials.

    Science.gov (United States)

    Thomas, Brijith; Rombouts, Jeroen; Oostergetel, Gert T; Gupta, Karthick B S S; Buda, Francesco; Lammertsma, Koop; Orru, Romano; de Groot, Huub J M

    2017-03-08

    Hybrid magic-angle spinning (MAS) NMR spectroscopy and TEM were demonstrated for de novo structure determination of para-crystalline materials with a bioinspired fused naphthalene diimide (NDI)-salphen-phenazine prototype light-harvesting compound. Starting from chiral building blocks with C2 molecular symmetry, the asymmetric unit was determined by MAS NMR spectroscopy, index low-resolution TEM diffraction data, and resolve reflection conditions, and for the first time the ability to determine the space group from reciprocal space data using this hybrid approach was shown. Transfer of molecular C2 symmetry into P2/c packing symmetry provided a connection across length scales to overcome both lack of long-range order and missing diffraction-phase information. Refinement with heteronuclear distance constraints confirmed the racemic P2/c packing that was scaffolded by molecular recognition of salphen zinc in a pseudo-octahedral environment with bromide and with alkyl chains folding along the phenazine. The NDI light-harvesting stacks ran orthogonal to the intermolecular electric dipole moment present in the solid. Finally, the orientation of flexible lamellae on an electrode surface was determined. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  9. Optical studies of crystalline organic superconductors under extreme conditions

    CERN Document Server

    McDonald, R D

    2001-01-01

    the aim being to make an optical measurement of the pressure dependence of the charge carrier effective mass. Chapter 4 concentrates on the vibrational modes of kappa-(BEDT-TTF) sub 2 Cu(SCN) sub 2. This chapter reports the first Raman scattering experiments on an organic superconductor at high pressure. Comparison of the infrared reflectance and Raman scattering measurements are used to elucidate the role of electron-phonon coupling in this material's superconductivity. Chapter 5 reports the first non-resonant measurements of the GHz conductivity of an organic molecular superconductor. These experiments probe the unconventional metallic properties of an organic superconductor during the onset of superconductivity. This thesis reports experiments which involve the interaction of light and matter to probe the properties of crystalline organic superconductors. The organic superconductors of the BEDT-TTF family are prototypical correlated electron systems; their low-temperature ground states are dominated by man...

  10. Optical material. Hikari zairyo

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, T.; Sakate, N.; Ueoka, T.; Iwakuni, H. (Mazda Motor Corp., Hiroshima (Japan))

    1990-06-01

    It is obvious that various electronic technologies will be positively adopted in automobiles in the future and optical materials are supporting the above trend greatly. In this article, with regard to the optical materials now adopted in automobiles or those expected to be adopted therein in the future, their principles as well as usage, etc. are outlined. Furthermore, the prospect of the materials in the future is stated. The optical materials selected in this article are as follows: as for optical communications; optical fibers, photo emission/reception components, connecting technologies, and photo switches, etc., concerning materials for display such as meters and instrument panels for automobiles, etc.; liquid crystal, electroluminescent elements, light emitting diodes, and polarization films, with regard to dimmering materials; electrochromism and photochromism, and concerning other optical materials; solar cells, and transparent electroconductive films. 13 refs., 4 figs., 6 tabs.

  11. Organic nonlinear optical materials

    Science.gov (United States)

    Umegaki, S.

    1987-01-01

    Recently, it became clear that organic compounds with delocalized pi electrons show a great nonlinear optical response. Especially, secondary nonlinear optical constants of more than 2 digits were often seen in the molecular level compared to the existing inorganic crystals such as LiNbO3. The crystallization was continuously tried. Organic nonlinear optical crystals have a new future as materials for use in the applied physics such as photomodulation, optical frequency transformation, opto-bistabilization, and phase conjugation optics. Organic nonlinear optical materials, e.g., urea, O2NC6H4NH2, I, II, are reviewed with 50 references.

  12. Innovative Solar Optical Materials

    Science.gov (United States)

    Lampert, Carl M.

    1984-02-01

    A variety of optical coatings are discussed in the context of solar energy utilization. Well-known coatings such as transparent conductors (heat mirrors), selective absorbers, and reflective films are surveyed briefly. Emphasis is placed on the materials' limitations and on use of lesser-known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, cold mirrors, fluorescent concentrator materials, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials, research has only recently been considered, so various design and durability issues need to be addressed.

  13. Imparting amphiphobicity on single-crystalline porous materials

    OpenAIRE

    Sun, Qi; He, Hongming; Gao, Wen-Yang; Aguila, Briana; Wojtas, Lukasz; Dai, Zhifeng; Li, Jixue; Chen, Yu-Sheng; Xiao, Feng-Shou; Ma, Shengqian

    2016-01-01

    The sophisticated control of surface wettability for target-specific applications has attracted widespread interest for use in a plethora of applications. Despite the recent advances in modification of non-porous materials, surface wettability control of porous materials, particularly single crystalline, remains undeveloped. Here we contribute a general method to impart amphiphobicity on single-crystalline porous materials as demonstrated by chemically coating the exterior of metal-organic fr...

  14. Optical Properties of Non-Crystalline Semiconductors.

    Science.gov (United States)

    1984-01-01

    Instruments, 1974, unpublished. 42. de Neufville, J.P., Photostructural transformations in amorphous solids, 0 in Optical Properties of Solids --New...semiconductors, in Optical Properties of Solids , Nudelman, S., and Mitra, S.S., eds., Plenum, N.Y., 1969, 123. 52. Cody, G.D., Brooks, B.G., and

  15. Characterization of Cholesteric Cyclic Siloxane Liquid Crystalline Materials

    Science.gov (United States)

    1991-11-01

    34AD-A256 128 CHARACIEUAThIONOFPCl LEST CCYCJC SILOXANE LIQUID CRYSTALLINE MATERIALS TI I Herbert E. Kii C r-• CTr Dept. of Chemical Engineering v... crystalline Materials . 18: 2422 S a.•mo) ... : 01 TJ suning. RR 1*1., Er SamlskI, •L CVa1e. W AMd 7. PWMoaG ORGAIRZAIIO "W3(SC) Sil AQM~SISfS) L. KNOW"ma...ordering of the NLO chromcphore can give rise to large response amplitudes, one system currently being investigated are liquid crystalline materials which

  16. Imparting amphiphobicity on single-crystalline porous materials

    Science.gov (United States)

    Sun, Qi; He, Hongming; Gao, Wen-Yang; Aguila, Briana; Wojtas, Lukasz; Dai, Zhifeng; Li, Jixue; Chen, Yu-Sheng; Xiao, Feng-Shou; Ma, Shengqian

    2016-10-01

    The sophisticated control of surface wettability for target-specific applications has attracted widespread interest for use in a plethora of applications. Despite the recent advances in modification of non-porous materials, surface wettability control of porous materials, particularly single crystalline, remains undeveloped. Here we contribute a general method to impart amphiphobicity on single-crystalline porous materials as demonstrated by chemically coating the exterior of metal-organic framework (MOF) crystals with an amphiphobic surface. As amphiphobic porous materials, the resultant MOF crystals exhibit both superhydrophobicity and oleophobicity in addition to retaining high crystallinity and intact porosity. The chemical shielding effect resulting from the amphiphobicity of the MOFs is illustrated by their performances in water/organic vapour adsorption, as well as long-term ultrastability under highly humidified CO2 environments and exceptional chemical stability in acid/base aqueous solutions. Our work thereby pioneers a perspective to protect crystalline porous materials under various chemical environments for numerous applications.

  17. Optical materials and applications

    CERN Document Server

    Wakaki, Moriaki; Kudo, Keiei

    2012-01-01

    The definition of optical material has expanded in recent years, largely because of IT advances that have led to rapid growth in optoelectronics applications. Helping to explain this evolution, Optical Materials and Applications presents contributions from leading experts who explore the basic concepts of optical materials and the many typical applications in which they are used. An invaluable reference for readers ranging from professionals to technical managers to graduate engineering students, this book covers everything from traditional principles to more cutting-edge topics. It also detai

  18. Liquid crystalline epoxy nanocomposite material for dental application.

    Science.gov (United States)

    Tai, Yun-Yuan; Hsu, Sheng-Hao; Chen, Rung-Shu; Su, Wei-Fang; Chen, Min-Huey

    2015-01-01

    Novel liquid crystalline epoxy nanocomposites, which exhibit reduced polymerization shrinkage and effectively bond to tooth structures, can be applied in esthetic dentistry, including core and post systems, direct and indirect restorations, and dental brackets. The purposes of this study were to investigate the properties of liquid crystalline epoxy nanocomposites including biocompatibility, microhardness, and frictional forces of bracket-like blocks with different filler contents for further clinical applications. In this study, we evaluated liquid crystalline epoxy nanocomposite materials that exhibited various filler contents, by assessing their cell activity performance using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and their microhardness with or without thermocycling. We also evaluated the frictional force between bracket-like duplicates and commercially available esthetic bracket systems using Instron 5566. The liquid crystalline epoxy nanocomposite materials showed good biocompatibility. The materials having high filler content demonstrated greater microhardness compared with commercially available bracket materials, before and after the thermocycling treatment. Thus, manufacturing processes are important to reduce frictional force experienced by orthodontic brackets. The microhardness of the bracket-like blocks made by our new material is superior to the commercially available brackets, even after thermocycling. Our results indicate that the evaluated liquid crystalline epoxy nanocomposite materials are of an appropriate quality for application in dental core and post systems and in various restorations. By applying technology to refine manufacturing processes, these new materials could also be used to fabricate esthetic brackets for orthodontic treatment. Copyright © 2014. Published by Elsevier B.V.

  19. Eye lens crystallins: a component of intraocular pseudoexfoliative material.

    Science.gov (United States)

    Veromann, Siiri; Sünter, Alar; Juronen, Erkki; Tasa, Gunnar; Panov, Aleksei

    2004-01-01

    Feeding experimental animals (19 pigs) with surplus sucrose and salt (NaCl) caused cataractous changes in lens tissue and triggered the formation of pseudoexfoliative material on the lens capsule. In the control animals (15 pigs) pseudoexfoliative material was absent. The avidin-biotin complex immunohistochemical method was applied to the pseudoexfoliative material obtained from 15 porcine experimental precataractous lenses and 1 spontaneously cataractous eye and revealed crystallins as a component of the intraocular pseudoexfoliative material. To prevent the development of both intraocular pseudoexfoliative material and crystallin-dependent glaucomatous changes in the trabecular meshwork of the eye, it is important to avoid any cataractogenic insult, including surplus sucrose and salt consumption, causing crystallin leakage from the lens. Copyright 2004 S. Karger AG, Basel

  20. Electronic and optical excitations in crystalline conjugated polymers

    Science.gov (United States)

    van der Horst, J.-W.; Bobbert, P. A.; Michels, M. A.

    2002-07-01

    We calculate the electronic and optical excitations of crystalline polythiophene and polyphenylenevinylene, using the GW approximation for the electronic self-energy and including excitonic effects by solving the electron-hole Bethe-Salpeter equation. We compare with our earlier calculations on an isolated polythiophene chain and polymer chains embedded in a dielectric medium. Surprisingly, we find for the crystalline calculations optical gaps and exciton binding energies that are significantly smaller than present experimental values. We attribute the disagreement to the fact that the quantum-mechanical coherence between polymer chains, present in the calculations, is absent in most experimental situations. We discuss possible reasons for this absence. Our general conclusion is that the picture of a polymer chain in a dielectric medium is most appropriate in describing the present experimental data on electronic and optical excitations in conjugated polymers.

  1. A continuum theory for modeling the dynamics of crystalline materials.

    Science.gov (United States)

    Xiong, Liming; Chen, Youping; Lee, James D

    2009-02-01

    This paper introduces a multiscale field theory for modeling and simulation of the dynamics of crystalline materials. The atomistic formulation of a multiscale field theory is briefly introduced. Its applicability is discussed. A few application examples, including phonon dispersion relations of ferroelectric materials BiScO3 and MgO nano dot under compression are presented.

  2. Mesoscale Engineering of Nanocomposite Nonlinear Optical Materials

    Energy Technology Data Exchange (ETDEWEB)

    Afonso, C.N.; Feldman, L.C.; Gonella, F.; Haglund, R.F.; Luepke, G.; Magruder, R.H.; Mazzoldi, P.; Osborne, D.H.; Solis, J.; Zuhr, R.A.

    1999-11-01

    Complex nonlinear optical materials comprising elemental, compound or alloy quantum dots embedded in appropriate dielectric or semiconducting hosts may be suitable for deployment in photonic devices. Ion implantation, ion exchange followed by ion implantation, and pulsed laser deposition have ail been used to synthesize these materials. However, the correlation between the parameters of energetic-beam synthesis and the nonlinear optical properties is still very rudimentary when one starts to ask what is happening at nanoscale dimensions. Systems integration of complex nonlinear optical materials requires that the mesoscale materials science be well understood within the context of device structures. We discuss the effects of beam energy and energy density on quantum-dot size and spatial distribution, thermal conductivity, quantum-dot composition, crystallinity and defects - and, in turn, on the third-order optical susceptibility of the composite material. Examples from recent work in our laboratories are used to illustrate these effects.

  3. Design of multi materials combining crystalline and amorphous metallic alloys

    Energy Technology Data Exchange (ETDEWEB)

    Volland, A.; Ragani, J.; Liu, Y.; Gravier, S.; Suery, M. [Grenoble University/CNRS, SIMAP Laboratory, Grenoble INP/UJF, 38402 Saint-Martin d' Heres (France); Blandin, J.J., E-mail: jean-jacques.blandin@simap.grenoble-inp.fr [Grenoble University/CNRS, SIMAP Laboratory, Grenoble INP/UJF, 38402 Saint-Martin d' Heres (France)

    2012-09-25

    Highlights: Black-Right-Pointing-Pointer Elaboration of multi materials associating metallic glasses and conventional crystalline alloys by co-deformation performed at temperatures close to the glass transition temperature of the metallic glasses. Black-Right-Pointing-Pointer Elaboration of filamentary metal matrix composites with a core in metallic glass by co extrusion. Black-Right-Pointing-Pointer Sandwich structures produced by co-pressing. Black-Right-Pointing-Pointer Detection of atomic diffusion from the glass to the crystalline alloys during the processes. Black-Right-Pointing-Pointer Good interfaces between the metallic glasses and the crystalline alloys, as confirmed by mechanical characterisation. - Abstract: Multi materials, associating zirconium based bulk metallic glasses and crystalline metallic alloys like magnesium alloys or copper are elaborated by co-deformation processing performed in the supercooled liquid regions (SLR) of the bulk metallic glasses. Two processes are investigated: co-extrusion and co-pressing. In the first case, filamentary composites with various designs can be produced whereas in the second case sandwich structures are obtained. The experimental window (temperature, time) in which processing can be carried out is directly related to the crystallisation resistance of the glass which requires getting information about the crystallisation conditions in the selected metallic glasses. Thermoforming windows are identified for the studied BMGs by thermal analysis and compression tests in their SLR. The mechanical properties of the produced multi materials are investigated thanks to specifically developed mechanical devices and the interfaces between the amorphous and the crystalline alloys are characterised.

  4. Optical combs with a crystalline whispering gallery mode resonator

    CERN Document Server

    Savchenkov, Anatoliy A; Ilchenko, Vladimir S; Solomatine, Iouri; Seidel, David; Maleki, Lute

    2008-01-01

    We report on the experimental demonstration of a tunable monolithic optical frequency comb generator. The device is based on the four-wave mixing in a crystalline calcium fluoride whispering gallery mode resonator. The frequency spacing of the comb is given by an integer number of the free spectral range of the resonator. We select the desired number by tuning the pumping laser frequency with respect to the corresponding resonator mode. We also observe interacting optical combs and high-frequency hyperparametric oscillation, depending on the experimental conditions. A potential application of the comb for generating narrowband frequency microwave signals is demonstrated.

  5. Liquid crystalline epoxy nanocomposite material for dental application

    Directory of Open Access Journals (Sweden)

    Yun-Yuan Tai

    2015-01-01

    Conclusion: The microhardness of the bracket-like blocks made by our new material is superior to the commercially available brackets, even after thermocycling. Our results indicate that the evaluated liquid crystalline epoxy nanocomposite materials are of an appropriate quality for application in dental core and post systems and in various restorations. By applying technology to refine manufacturing processes, these new materials could also be used to fabricate esthetic brackets for orthodontic treatment.

  6. Nanoprocessing of layered crystalline materials by atomic force microscopy.

    Science.gov (United States)

    Miyake, Shojiro; Wang, Mei

    2015-01-01

    By taking advantage of the mechanical anisotropy of crystalline materials, processing at a single-layer level can be realized for layered crystalline materials with periodically weak bonds. Mica (muscovite), graphite, molybdenum disulfide (MoS2), and boron nitride have layered structures, and there is little interaction between the cleavage planes existing in the basal planes of these materials. Moreover, it is easy to image the atoms on the basal plane, where the processed shape can be observed on the atomic level. This study reviews research evaluating the nanometer-scale wear and friction as well as the nanometer-scale mechanical processing of muscovite using atomic force microscopy (AFM). It also summarizes recent AFM results obtained by our research group regarding the atomic-scale mechanical processing of layered materials including mica, graphite, MoS2, and highly oriented pyrolytic graphite.

  7. Materials for Optical Cryocoolers

    Science.gov (United States)

    2013-12-07

    temperature.9,53 They used 5 mol% and 10 mol% Yb3+-doped YLF single crystals that were grown by AC Materials Inc. using the Czochralski method . The...reaching the attached payload. The design of the thermal link involves optimization of the optical geometry as well as careful choice of the methods

  8. Methods for manufacturing geometric multi-crystalline cast materials

    Science.gov (United States)

    Stoddard, Nathan G

    2013-11-26

    Methods are provided for casting one or more of a semi-conductor, an oxide, and an intermetallic material. With such methods, a cast body of a geometrically ordered multi-crystalline form of the one or more of a semiconductor, an oxide, and an intermetallic material may be formed that is free or substantially free of radially-distributed impurities and defects and having at least two dimensions that are each at least about 10 cm.

  9. Colloidal-crystal-assisted patterning of crystalline materials.

    Science.gov (United States)

    Li, Cheng; Qi, Limin

    2010-04-06

    Colloidal crystals have shown great potential as versatile templates for the fabrication of patterned micro- and nanostructures with complex architectures and novel properties. The patterning of functional crystalline materials in two and three dimensions is essential to the realization of their applications in many technologically important fields. This article highlights some recent progress in the fabrication of 2D and 3D patterned crystalline materials with the assistance of colloidal crystals. By combining a bioinspired synthetic strategy based on a transient amorphous phase with a colloidal-crystal templating method, unique 3D ordered macroporous (3DOM) calcite single crystals can be created. Moreover, patterned arrays of regular ZnO nanopillars with controlled size, shape, and orientation can be fabricated via a facile wet chemical approach by using masks derived from monolayer colloidal crystals (MCC).

  10. Optical properties of advanced materials

    CERN Document Server

    Kajikawa, Kotaro

    2013-01-01

    In the last decade, optically functionalized materials have developed rapidly, from bulk matters to structured forms. Now we have a rich variety of attractive advanced materials. They are applied to optical and electrical devices that support the information communication technology in the mid 21-th century. Accordingly, it is quite important to have a broad knowledge of the optical properties of advanced materials for students, scientists and engineers working in optics and related fields. This book is designed to teach fundamental optical properties of such advanced materials effectively. These materials have their own peculiarities which are very interesting in modern optical physics and also for applications because the concepts of optical properties are quite different from those in conventional optical materials. Hence each chapter starts to review the basic concepts of the materials briefly and proceeds to the practical use. The important topics covered in this book include:  quantum structures of sem...

  11. Organometallic chemistry meets crystal engineering to give responsive crystalline materials.

    Science.gov (United States)

    Bacchi, A; Pelagatti, P

    2016-01-25

    Dynamically porous crystalline materials have been obtained by engineering organometallic molecules. This feature article deals with organometallic wheel-and-axle compounds, molecules with two relatively bulky groups (wheels) connected by a linear spacer. The wheels are represented by half-sandwich Ru(ii) moieties, while the spacer can be covalent or supramolecular in character. Covalent spacers are obtained using divergent bidentate ligands connecting two [(arene)RuX2] groups. Supramolecular spacers are instead obtained by exploiting the dimerization of COOH or C(O)NH2 groups appended to N-based ligands. A careful choice of ligand functional groups and X ligands leads to the isolation of crystalline materials with remarkable host-guest properties, evidenced by the possibility of reversibly capturing/releasing volatile guests through heterogenous solid-gas reactions. Structural correlations between the crystalline arrangement of the apohost and the host-guest compounds allow us to envisage the structural path followed by the system during the exchange processes.

  12. From Cellulosic Based Liquid Crystalline Sheared Solutions to 1D and 2D Soft Materials

    Directory of Open Access Journals (Sweden)

    Maria Helena Godinho

    2014-06-01

    Full Text Available Liquid crystalline cellulosic-based solutions described by distinctive properties are at the origin of different kinds of multifunctional materials with unique characteristics. These solutions can form chiral nematic phases at rest, with tuneable photonic behavior, and exhibit a complex behavior associated with the onset of a network of director field defects under shear. Techniques, such as Nuclear Magnetic Resonance (NMR, Rheology coupled with NMR (Rheo-NMR, rheology, optical methods, Magnetic Resonance Imaging (MRI, Wide Angle X-rays Scattering (WAXS, were extensively used to enlighten the liquid crystalline characteristics of these cellulosic solutions. Cellulosic films produced by shear casting and fibers by electrospinning, from these liquid crystalline solutions, have regained wider attention due to recognition of their innovative properties associated to their biocompatibility. Electrospun membranes composed by helical and spiral shape fibers allow the achievement of large surface areas, leading to the improvement of the performance of this kind of systems. The moisture response, light modulated, wettability and the capability of orienting protein and cellulose crystals, opened a wide range of new applications to the shear casted films. Characterization by NMR, X-rays, tensile tests, AFM, and optical methods allowed detailed characterization of those soft cellulosic materials. In this work, special attention will be given to recent developments, including, among others, a moisture driven cellulosic motor and electro-optical devices.

  13. Alkyl chains acting as entropy reservoir in liquid crystalline materials.

    Science.gov (United States)

    Sorai, Michio; Saito, Kazuya

    2003-01-01

    The roles played by the conformational disordering of alkyl chains in determining the aggregation states of matter are reviewed for liquid crystalline materials from a thermodynamic perspective. Entropy, which is one of the most macroscopic concepts but which has a clear microscopic meaning, provides crucial microscopic information for complex systems for which a microscopic description is hard to establish. Starting from structural implication by absolute (third-law) entropy for crystalline solids, the existence of successive phase transitions caused by the successive conformational melting of alkyl chains in discotic mesogens is explained. An experimental basis is given for the "quasi-binary picture" of thermotropic liquid crystals, i.e., the highly disordered alkyl chains behave like a second component (solvent). A novel entropy transfer between the "components" of a molecule and the resulting "alkyl chains as entropy reservoir" mechanism are explained for cubic mesogens.

  14. Mechanically flexible optically transparent porous mono-crystalline silicon substrate

    KAUST Repository

    Rojas, Jhonathan Prieto

    2012-01-01

    For the first time, we present a simple process to fabricate a thin (≥5μm), mechanically flexible, optically transparent, porous mono-crystalline silicon substrate. Relying only on reactive ion etching steps, we are able to controllably peel off a thin layer of the original substrate. This scheme is cost favorable as it uses a low-cost silicon <100> wafer and furthermore it has the potential for recycling the remaining part of the wafer that otherwise would be lost and wasted during conventional back-grinding process. Due to its porosity, it shows see-through transparency and potential for flexible membrane applications, neural probing and such. Our process can offer flexible, transparent silicon from post high-thermal budget processed device wafer to retain the high performance electronics on flexible substrates. © 2012 IEEE.

  15. Grain Boundary (GB) Studies in Nano- and Micro- Crystalline Materials

    OpenAIRE

    Tanju, Mst Sohanazaman

    2011-01-01

    Polycrystalline materials are composed of grains and grain boundaries. The total volume of occupied grain boundaries in polycrystalline material depends on the grain size. When grain size decreases the volume fraction of grain boundaries increases. For example, when grain size is 10 nm grain boundary volume fraction is ~ 25%. In polycrystalline materials, different properties (mechanical, electrical, optical, magnetic) are affected by the size of their grains and by the atomic structure of...

  16. Growth of crystalline semiconductor materials on crystal surfaces

    CERN Document Server

    Aleksandrov, L

    2013-01-01

    Written for physicists, chemists, and engineers specialising in crystal and film growth, semiconductor electronics, and various applications of thin films, this book reviews promising scientific and engineering trends in thin films and thin-films materials science. The first part discusses the physical characteristics of the processes occurring during the deposition and growth of films, the principal methods of obtaining semiconductor films and of reparing substrate surfaces on which crystalline films are grown, and the main applications of films. The second part contains data on epitaxial i

  17. A Study of Crystalline Mechanism of Penetration Sealer Materials

    Directory of Open Access Journals (Sweden)

    Li-Wei Teng

    2014-01-01

    Full Text Available It is quite common to dispense a topping material like crystalline penetration sealer materials (CPSM onto the surface of a plastic substance such as concrete to extend its service life span by surface protections from outside breakthrough. The CPSM can penetrate into the existing pores or possible cracks in such a way that it may form crystals to block the potential paths which provide breakthrough for any unknown materials. This study investigated the crystalline mechanism formed in the part of concrete penetrated by the CPSM. We analyzed the chemical composites, in order to identify the mechanism of CPSM and to evaluate the penetrated depth. As shown in the results, SEM observes the acicular-structured crystals filling capillary pores for mortar substrate of the internal microstructure beneath the concrete surface; meanwhile, XRD and FT-IR showed the main hydration products of CPSM to be C-S-H gel and CaCO3. Besides, MIP also shows CPSM with the ability to clog capillary pores of mortar substrate; thus, it reduces porosity, and appears to benefit in sealing pores or cracks. The depth of CPSM penetration capability indicated by TGA shows 0–10 mm of sealer layer beneath the concrete surface.

  18. Templated Chemically Deposited Semiconductor Optical Fiber Materials

    Science.gov (United States)

    Sparks, Justin R.; Sazio, Pier J. A.; Gopalan, Venkatraman; Badding, John V.

    2013-07-01

    Chemical deposition is a powerful technology for fabrication of planar microelectronics. Optical fibers are the dominant platform for telecommunications, and devices such as fiber lasers are forming the basis for new industries. High-pressure chemical vapor deposition (HPCVD) allows for conformal layers and void-free wires of precisely doped crystalline unary and compound semiconductors inside the micro-to-nanoscale-diameter pores of microstructured optical fibers (MOFs). Drawing the fibers to serve as templates into which these semiconductor structures can be fabricated allows for geometric design flexibility that is difficult to achieve with planar fabrication. Seamless coupling of semiconductor optoelectronic and photonic devices with existing fiber infrastructure thus becomes possible, facilitating all-fiber technological approaches. The deposition techniques also allow for a wider range of semiconductor materials compositions to be exploited than is possible by means of preform drawing. Gigahertz bandwidth junction-based fiber devices can be fabricated from doped crystalline semiconductors, for example. Deposition of amorphous hydrogenated silicon, which cannot be drawn, allows for the exploitation of strong nonlinear optical function in fibers. Finally, crystalline compound semiconductor fiber cores hold promise for high-power infrared light-guiding fiber devices and subwavelength-resolution, large-area infrared imaging.

  19. Semiconductor device PN junction fabrication using optical processing of amorphous semiconductor material

    Science.gov (United States)

    Sopori, Bhushan; Rangappan, Anikara

    2014-11-25

    Systems and methods for semiconductor device PN junction fabrication are provided. In one embodiment, a method for fabricating an electrical device having a P-N junction comprises: depositing a layer of amorphous semiconductor material onto a crystalline semiconductor base, wherein the crystalline semiconductor base comprises a crystalline phase of a same semiconductor as the amorphous layer; and growing the layer of amorphous semiconductor material into a layer of crystalline semiconductor material that is epitaxially matched to the lattice structure of the crystalline semiconductor base by applying an optical energy that penetrates at least the amorphous semiconductor material.

  20. Experimental analysis on the coupled effect between thermo-optical properties and microstructure of semi-crystalline thermoplastics

    Science.gov (United States)

    Boztepe, Sinan; Thiam, Abdoulahad; de Almeida, Olivier; Le Maoult, Yannick; Schmidt, Fabrice

    2016-10-01

    Radiation heat transfer is the most common method used in thermoforming processes of thermoplastic polymers due to their poor thermal conductivity. Considering the fact that the thermo-optical characteristics of polymers play a major role in the efficiency of radiative heat transfer in bulk polymers, microstructure of semi-crystalline thermoplastics is one of the key factors to understand this heat transfer phenomenon in depth. In this study, a relation between the microcrystalline structure of polyolefin (PO) and its effect on the thermo-optical properties was experimentally analyzed. Information on the microcrystalline structure of the samples was obtained by determining the degree of crystallinity (Xc) thanks to Differential Scanning Calorimetry (DSC). Using Fourier Transform Infrared (FT-IR) spectroscopy and integrating sphere, optical characteristics of the PO samples were analyzed considering two spectrums that are in near-infrared (NIR) and middle-infrared (MIR) spectral regions respectively. The analyses showed that the degree of crystallinity has a great effect on the thermo-optical characteristics of the PO - particularly considering transmission - in NIR range. Such a coupled effect can be functionalized and adopted to develop an advanced radiative heat transfer model that may be used for addressing various problems on infrared (IR) heating of heterogeneous materials, particularly semi-crystalline thermoplastics. In the last part of the paper, a theoretical approach for consideration of the heterogeneity of semi-crystalline thermoplastics in a radiative heat transfer model was highlighted.

  1. Dynamical Study of Guest-Host Orientational Interaction in LiquidCrystalline Materials

    Energy Technology Data Exchange (ETDEWEB)

    Truong, Thai Viet [Univ. of California, Berkeley, CA (United States)

    2005-01-01

    Guest-host interaction has long been a subject of interest in many disciplines. Emphasis is often on how a small amount of guest substance could significantly affect the properties of a host material. This thesis describe our work in studying a guest-host effect where dye-doping of liquid crystalline materials greatly enhances the optical Kerr nonlinearity of the material. The dye molecules, upon excitation and via intermolecular interaction, provides an extra torque to reorient the host molecules, leading to the enhanced optical Kerr nonlinearity. We carried out a comprehensive study on the dynamics of the photoexcited dye-doped liquid crystalline medium. Using various experimental techniques, we separately characterized the dynamical responses of the relevant molecular species present in the medium following photo-excitation, and thus were able to follow the transient process in which photo-excitation of the dye molecules exert through guest-host interaction a net torque on the host LC material, leading to the observed enhanced molecular reorientation. We also observed for the first time the enhanced reorientation in a pure liquid crystal system, where the guest population is created through photoexcitation of the host molecules themselves. Experimental results agree quantitatively with the time-dependent theory based on a mean-field model of the guest-host interaction.

  2. Mid-Infrared Optical Frequency Combs based on Crystalline Microresonators

    CERN Document Server

    Wang, C Y; Del'Haye, P; Schliesser, A; Hofer, J; Holzwarth, R; Hänsch, T W; Picqué, N; Kippenberg, T J

    2011-01-01

    The mid-infrared spectral range (\\lambda ~ 2 \\mu m to 20 \\mu m) is known as the "molecular fingerprint" region as many molecules have their highly characteristic, fundamental ro-vibrational bands in this part of the electromagnetic spectrum. Broadband mid-infrared spectroscopy therefore constitutes a powerful and ubiquitous tool for optical analysis of chemical components that is used in biochemistry, astronomy, pharmaceutical monitoring and material science. Optical frequency combs, i.e. broad spectral bandwidth coherent light sources consisting of equally spaced sharp lines, have revolutionized optical frequency metrology one decade ago. They now demonstrate dramatically improved acquisition rates, resolution and sensitivity for molecular spectroscopy mostly in the visible and near-infrared ranges. Mid-infrared frequency combs have therefore become highly desirable and recent progress in generating such combs by nonlinear frequency conversion has opened access to this spectral region. Here we report on a pr...

  3. Effects of structure distortion on optical phonon properties of crystalline beta-BaTeMo{sub 2}O{sub 9}—A novel nonlinear optical material: Infrared and Raman spectra as well as first-principles calculations

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, S. T.; Huang, Y.; Qiu, W. Y.; Li, Y. L.; He, S. M.; Zhang, B., E-mail: bozhang@mail.sitp.ac.cn, E-mail: xschen@mail.sitp.ac.cn, E-mail: luwei@mail.sitp.ac.cn; Chen, X. S., E-mail: bozhang@mail.sitp.ac.cn, E-mail: xschen@mail.sitp.ac.cn, E-mail: luwei@mail.sitp.ac.cn; Lu, W., E-mail: bozhang@mail.sitp.ac.cn, E-mail: xschen@mail.sitp.ac.cn, E-mail: luwei@mail.sitp.ac.cn [National Lab for Infrared Physics, Shanghai Institute of Technical Physics, Chinese Academy of Sciences, 500 Yu Tian Road, Shanghai 200083 (China); Zhang, J. J.; Tao, X. T. [State Key Laboratory of Crystal Materials, Shangdong University, 27 South Shanda Road, Jinan, Shangdong 250100 (China)

    2013-12-21

    The infrared dielectric property of monoclinic BaTeMo{sub 2}O{sub 9} single crystals is studied by polarized IR reflectance spectra from 20 to 1800 cm{sup −1}. Based on the modified Lorentz model, the frequencies, strengths, and dampings of TO modes as well as the orientations of the dipole momenta are determined, agreeing well with Raman spectra and results from First-principles calculation. The observed modes are visually assigned to the specific atoms' motions in the primitive cell based on the theory calculations. A large shift of the internal modes of the anion groups relative to free anion co-ordination polyhedra is observed, which can be used to indicate the distortions of co-ordination polyhedra related to the nonlinear optical properties. Further, the experimental results of the strengths of the oscillators support the elimination and splitting of degenerate modes in free regular polyhedrons. These results offer a way to evaluate the nonlinear optical properties by use of traditional IR reflectivity spectra.

  4. Effects of structure distortion on optical phonon properties of crystalline beta-BaTeMo2O9—A novel nonlinear optical material: Infrared and Raman spectra as well as first-principles calculations

    Science.gov (United States)

    Zhou, S. T.; Huang, Y.; Qiu, W. Y.; Li, Y. L.; He, S. M.; Zhang, J. J.; Zhang, B.; Chen, X. S.; Tao, X. T.; Lu, W.

    2013-12-01

    The infrared dielectric property of monoclinic BaTeMo2O9 single crystals is studied by polarized IR reflectance spectra from 20 to 1800 cm-1. Based on the modified Lorentz model, the frequencies, strengths, and dampings of TO modes as well as the orientations of the dipole momenta are determined, agreeing well with Raman spectra and results from First-principles calculation. The observed modes are visually assigned to the specific atoms' motions in the primitive cell based on the theory calculations. A large shift of the internal modes of the anion groups relative to free anion co-ordination polyhedra is observed, which can be used to indicate the distortions of co-ordination polyhedra related to the nonlinear optical properties. Further, the experimental results of the strengths of the oscillators support the elimination and splitting of degenerate modes in free regular polyhedrons. These results offer a way to evaluate the nonlinear optical properties by use of traditional IR reflectivity spectra.

  5. Light-Driven Liquid Crystalline Materials: From Photo-Induced Phase Transitions and Property Modulations to Applications.

    Science.gov (United States)

    Bisoyi, Hari Krishna; Li, Quan

    2016-12-28

    Light-driven phenomena both in living systems and nonliving materials have enabled truly fascinating and incredible dynamic architectures with terrific forms and functions. Recently, liquid crystalline materials endowed with photoresponsive capability have emerged as enticing systems. In this Review, we focus on the developments of light-driven liquid crystalline materials containing photochromic components over the past decade. Design and synthesis of photochromic liquid crystals (LCs), photoinduced phase transitions in LC, and photoalignment and photoorientation of LCs have been covered. Photomodulation of pitch, polarization, lattice constant and handedness inversion of chiral LCs is discussed. Light-driven phenomena and properties of liquid crystalline polymers, elastomers, and networks have also been analyzed. The applications of photoinduced phase transitions, photoalignment, photomodulation of chiral LCs, and photomobile polymers have been highlighted wherever appropriate. The combination of photochromism, liquid crystallinity, and fabrication techniques has enabled some fascinating functional materials which can be driven by ultraviolet, visible, and infrared light irradiation. Nanoscale particles have been incorporated to widen and diversify the scope of the light-driven liquid crystalline materials. The developed materials possess huge potential for applications in optics, photonics, adaptive materials, nanotechnology, etc. The challenges and opportunities in this area are discussed at the end of the Review.

  6. Ideas Concerning the Non-Crystalline Materials Obtainment by Melt undercooling

    Science.gov (United States)

    2001-06-01

    UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADPO1 1555 TITLE: Ideas Concerning the Non- Crystalline Materials Obtainment...Optoelectronics and Advanced Materials, Vol. 3, No. 2, June 2001, p. 531 - 536 IDEAS CONCERNING THE NON- CRYSTALLINE MATERIALS OBTAINMENT BY MELT UNDERCOOLING P...are considerable enriched in the time passed after the elaboration of the above ideas. Ideas concerning the non- crystalline materials obtainment by melt

  7. Crystallinity in starch plastics: consequences for material properties

    NARCIS (Netherlands)

    Vliegenthart, J.F.G.; Soest, J.J.G. van

    1997-01-01

    The processing of starches with biodegradable additives has made biodegradable plastics suitable for a number of applications. Starch plastics are partially crystalline as a result of residual crystallinity and the recrystallization of amylose and amylopectin. Such crystallinity is a key determinant

  8. High pressure optical studies of crystalline anils and related compounds

    Energy Technology Data Exchange (ETDEWEB)

    Hockert, E.N.; Drickamer, H.G.

    1977-12-01

    High pressure optical studies have been made on a series of crystalline therochromic and photochromic anils and model compounds. Measurements include absorption and emission peak locations and the integrated intensities of various absorption peaks including the uv peak and visible peaks introduced thermally or by irradiation at various temperatures and pressures. Emission yields were also obtained. For the thermochromic compounds there was a large increase in the equilibrium yield of the thermally induced peak with pressure (piezochromism), corresponding to a volume decrease of approx.1.2 cc/mole for 5-bromosalicylidene aniline (5BrSA). The emission peak shifts to lower energy and decreases in intensity primarily because of increased rate of the radiationless conversion. For salicylidene aniline and related photochromic crystals the rate of photochromic conversion varied with both pressure and temperature in a manner which depends on the size of the energy barriers to the forward and reverse processes. The emission yield increases with pressure at low pressure, goes through a maximum, and decreases at high pressure. At low pressure the dominant feature is increase in occupation of the emitting state while at high pressure the increased rate of the radiationless process governs. For 2- (O-hydroxyphenyl) benzoxazole (OHBO) (see Fig. 1), where a keto--enol rearrangement is most probable, the changes in absorption and emission intensity can be related to the same diagram used for the anils. This diagram also describes the behavior of benzilidene aniline (BA), where only a cis--trans isomerization is possible.

  9. A single-tilt TEM stereomicroscopy technique for crystalline materials.

    Science.gov (United States)

    McCabe, Rodney J; Misra, Amit; Mitchell, Terence E; Alexander, Kathleen B

    2003-02-01

    A new single-tilt technique for performing TEM stereomicroscopy of strain fields in crystalline materials has been developed. The technique is a weak beam technique that involves changing the value of g and/or s g while tilting across a set of Kikuchi bands. The primary benefit of the technique is it can be used with single-tilt TEM specimen holders including many specialty holders such as in situ straining, heating, and cooling holders. Standard stereo-TEM techniques are almost always limited to holders allowing two degrees of rotational freedom (i.e., double-tilt or tilt/rotation holders). An additional benefit of the new technique is that it eliminates the need to focus with the specimen height control. These advantages make it useful for stereo viewing or for quantitative stereomicroscopy provided necessary consideration is given to errors that may result from the technique.

  10. Unfolding the band structure of non-crystalline photonic band gap materials.

    Science.gov (United States)

    Tsitrin, Samuel; Williamson, Eric Paul; Amoah, Timothy; Nahal, Geev; Chan, Ho Leung; Florescu, Marian; Man, Weining

    2015-08-20

    Non-crystalline photonic band gap (PBG) materials have received increasing attention, and sizeable PBGs have been reported in quasi-crystalline structures and, more recently, in disordered structures. Band structure calculations for periodic structures produce accurate dispersion relations, which determine group velocities, dispersion, density of states and iso-frequency surfaces, and are used to predict a wide-range of optical phenomena including light propagation, excited-state decay rates, temporal broadening or compression of ultrashort pulses and complex refraction phenomena. However, band calculations for non-periodic structures employ large super-cells of hundreds to thousands building blocks, and provide little useful information other than the PBG central frequency and width. Using stereolithography, we construct cm-scale disordered PBG materials and perform microwave transmission measurements, as well as finite-difference time-domain (FDTD) simulations. The photonic dispersion relations are reconstructed from the measured and simulated phase data. Our results demonstrate the existence of sizeable PBGs in these disordered structures and provide detailed information of the effective band diagrams, dispersion relation, iso-frequency contours, and their angular dependence. Slow light phenomena are also observed in these structures near gap frequencies. This study introduces a powerful tool to investigate photonic properties of non-crystalline structures and provides important effective dispersion information, otherwise difficult to obtain.

  11. Conduit for high temperature transfer of molten semiconductor crystalline material

    Science.gov (United States)

    Fiegl, George (Inventor); Torbet, Walter (Inventor)

    1983-01-01

    A conduit for high temperature transfer of molten semiconductor crystalline material consists of a composite structure incorporating a quartz transfer tube as the innermost member, with an outer thermally insulating layer designed to serve the dual purposes of minimizing heat losses from the quartz tube and maintaining mechanical strength and rigidity of the conduit at the elevated temperatures encountered. The composite structure ensures that the molten semiconductor material only comes in contact with a material (quartz) with which it is compatible, while the outer layer structure reinforces the quartz tube, which becomes somewhat soft at molten semiconductor temperatures. To further aid in preventing cooling of the molten semiconductor, a distributed, electric resistance heater is in contact with the surface of the quartz tube over most of its length. The quartz tube has short end portions which extend through the surface of the semiconductor melt and which are lef bare of the thermal insulation. The heater is designed to provide an increased heat input per unit area in the region adjacent these end portions.

  12. New cyanopyridone based luminescent liquid crystalline materials: synthesis and characterization.

    Science.gov (United States)

    N, Ahipa T; Adhikari, Airody Vasudeva

    2014-11-01

    A new series of 4-(3,4-bis(akyloxy)phenyl)-6-(4-((1-(4-cyano- or 4-nitro-benzyl)-1H-1,2,3-triazol-4-yl)methoxy)phenyl)-2-oxo-1,2-dihydropyridine-3-carbonitriles carrying terminal di-alkoxy chain lengths (viz. octyloxy, decyloxy, dodecyloxy, tetradecyloxy and hexadodecyloxy) as well as terminal polar groups -CN or -NO2 have been designed and synthesized successfully as luminescent mesogens. Their thermotropic behaviors have been studied by means of differential scanning calorimetry and polarized optical microscopy. The supramolecular organizations in them were explored by the temperature dependent X-ray diffraction method and their photophysical properties were investigated using UV-visible and fluorescence spectral methods. The mesogenic study reveals that the presence of hydrogen bonds, as well as dimerization between the molecules, is mainly responsible for the formation of the ambient temperature hexagonal columnar phase (Colh) in the new molecules. Their photophysical study indicates that the compounds exhibit a strong absorption band at ∼370 nm and a blue emission band at ∼466 nm with good quantum yields of ∼0.62 when compared to quinine sulphate (Φf = 0.54) in chloroform. Also, the compounds show a slightly red shift in the absorption band with increased solvent polarity. In liquid crystalline films, they display a bathochromic shift in the emission band because of the intimate overlap of molecular cores in the hexagonal columnar phase.

  13. Cholesteric liquid crystalline materials with a dual circularly polarized light reflection band fixed at room temperature.

    Science.gov (United States)

    Agez, Gonzague; Mitov, Michel

    2011-05-26

    An unpolarized normal-incidence light beam reflected by a cholesteric liquid crystal is left- or right-circularly polarized, in the cholesteric temperature range. In this article, we present a novel approach for fabricating a cholesteric liquid crystalline material that exhibits reflection bands with both senses of polarization at room temperature. A cholesteric liquid crystal that presents a twist inversion at a critical temperature T(c) is blended with a small quantity of photopolymerizable monomers. Upon ultraviolet irradiation above T(c), the liquid crystal becomes a polymer-stabilized liquid crystal. Below T(c), the material reflects a dual circularly polarized band in the infrared. By quenching the experimental cell at a temperature below the blend's melting point, the optical properties of the material in an undercooled state are conserved for months at room temperature, which is critical to potential applications such as heat-repelling windows and polarization-independent photonic devices.

  14. Optical gain and stimulated emission in periodic nanopatterned crystalline silicon.

    Science.gov (United States)

    Cloutier, Sylvain G; Kossyrev, Pavel A; Xu, Jimmy

    2005-12-01

    Persistent efforts have been made to achieve efficient light emission from silicon in the hope of extending the reach of silicon technology into fully integrated optoelectronic circuits, meeting the needs for high-bandwidth intrachip and interchip connects. Enhanced light emission from silicon is known to be theoretically possible, enabled mostly through quantum-confinement effects. Furthermore, Raman-laser conversion was demonstrated in silicon waveguides. Here we report on optical gain and stimulated emission in uniaxially nanopatterned silicon-on-insulator using a nanopore array as an etching mask. In edge-emission measurements, we observed threshold behaviour, optical gain, longitudinal cavity modes and linewidth narrowing, along with a collimated far-field pattern, all indicative of amplification and stimulated emission. The sub-bandgap 1,278 nm emission peak is attributed to A-centre mediated phononless direct recombination between trapped electrons and free holes. The controlled nanoscale silicon engineering, combined with the low material loss in this sub-bandgap spectral range and the long electron lifetime in such A-type trapping centres, gives rise to the measured optical gain and stimulated emission and provides a new pathway to enhance light emission from silicon.

  15. Tapered Optical Fiber Humidity Sensor Coated with Nano-crystalline ZnO Doped with KCI

    Directory of Open Access Journals (Sweden)

    Sivacoumar Rajalingam

    2015-03-01

    Full Text Available In this research study we have targeted to fabricate a tapered optical fiber coated with zinc oxide doped with KCl to improve the humidity sensing capability of zinc oxide. The optical fiber was tapered through chemical etching method by HF acid (49.5%. The nano-crystalline Zinc Oxide (ZnO was synthesized using single molecular precursor method doped with KCl. The resulting material was characterized with Fourier Transform Infrared spectroscopy (FTIR, X-Ray Diffractometry (XRD and Scanning Electron Microscopy (SEM. The sensing mechanism of this sensor is based on the change of the optical properties of the coating when the relative humidity increases. The humidity sensing characteristic has been estimated by measuring the Optical Permeability (OP as a function of percentage of Relative Humidity (%RH in the ranging from 5 to 98% inside a closed chamber. The tapered optical fiber tested with an overlay coating at the optimal working point achieves better sensitivity. The experimental results show that the 5.7 wt% KCl doped ZnO nano-fibers hold super-rapid response and recovery than normal ZnO coating.

  16. Dynamics of the guest-host orientational interaction in dye-doped liquid-crystalline materials.

    Science.gov (United States)

    Truong, Thai V; Xu, Lei; Shen, Y R

    2005-11-01

    We present a comprehensive study on the dynamics of laser-induced molecular reorientation in a dye-doped liquid crystalline (LC) medium that exhibits significant enhancement of the optical Kerr nonlinearity due to guest-host interaction. Using various techniques, we separately characterized the dynamical responses of the relevant molecular species present in the medium following photoexcitation and, thus, were able to follow the transient process in which photoexcitation of the dye molecules exert through guest-host interaction a net torque on the host LC material, leading to the observed enhanced optical Kerr nonlinearity. Experimental results agree quantitatively with the time-dependent theory based on a mean-field model of the guest-host interaction.

  17. TOPICAL REVIEW: New crystalline silicon ribbon materials for photovoltaics

    Science.gov (United States)

    Hahn, G.; Schönecker, A.

    2004-12-01

    The objective of this article is to review, in relation to photovoltaic applications, the current status of crystalline silicon ribbon technologies as an alternative to technologies based on wafers originating from ingots. Increased wafer demand, the foreseeable silicon feedstock shortage, and the need for a substantial module cost reduction are the main issues that must be faced in the booming photovoltaic market. Ribbon technologies make excellent use of silicon, as wafers are crystallized directly from the melt at the desired thickness and no kerf losses occur. Therefore, they offer a high potential for significantly reducing photovoltaic electricity costs as compared to technology based on wafers cut from ingots. However, the defect structure present in the ribbon silicon wafers can limit material quality and cell efficiency. We will review the most successful of the ribbon techniques already used in large scale production or currently in the pilot demonstration phase, with special emphasis on the defects incorporated during crystal growth. Because of the inhomogeneous distribution of defects, mapped characterization techniques have to be applied. Al and P gettering studies give an insight into the complex interaction of defects in the multicrystalline materials as the gettering efficiency is influenced by the state of the chemical bonding of the metal atoms. The most important technique for improvement of carrier lifetimes is hydrogenation, whose kinetics are strongly influenced by oxygen and carbon concentrations present in the material. The best cell efficiencies for laboratory-type (17%-18% cell area: 4 cm2) as well as industrial-type (15%-16% cell area: {\\ge } 80~{\\mathrm {cm^{2}}} ) ribbon silicon solar cells are in the same range as for standard wafers cut from ingots. A substantial cost reduction therefore seems achievable, although the most promising techniques need to be improved.

  18. Satellite material contaminant optical properties

    Science.gov (United States)

    Wood, B. E.; Bertrand, W. T.; Seiber, B. L.; Kiech, E. L.; Falco, P. M.; Holt, J. D.

    1990-03-01

    The Air Force Wright Research and Development Center and the Arnold Engineering Development Center are continuing a program for measuring optical effects of satellite material outgassing products on cryo-optic surfaces. Presented here are infrared (4000 to 700 cm(-1)) transmittance data for contaminant films condensed on a 77 K germanium window. From the transmittance data, the contaminant film refractive and absorptive indices (n, k) were derived using an analytical thin-film interference model with a nonlinear least-squares algorithm. To date 19 materials have been studied with the optical contents determined for 13 of those. The materials include adhesives, paints, composites, films, and lubricants. This program is continuing and properties for other materials will be available in the future.

  19. Fastest non-ionic azo dyes and transfer of their thermal isomerisation kinetics into liquid-crystalline materials.

    Science.gov (United States)

    Garcia-Amorós, Jaume; Castro, M Cidália R; Coelho, Paulo; Raposo, M Manuela M; Velasco, Dolores

    2016-04-14

    Push-pull bithienylpyrrole-based azo dyes exhibit thermal isomerisation rates as fast as 1.4 μs in acetonitrile at 298 K becoming, thus, the fastest neutral azo dyes reported so far. These remarkably low relaxation times can be transferred into liquid-crystalline matrices enabling light-triggered oscillations in the optical density of the final material up to 11 kHz under ambient conditions.

  20. Defect evolution and pore collapse in crystalline energetic materials

    Science.gov (United States)

    Barton, Nathan R.; Winter, Nicholas W.; Reaugh, John E.

    2009-04-01

    This work examines the use of crystal based continuum mechanics in the context of dynamic loading. In particular, we examine model forms and simulations which are relevant to pore collapse in crystalline energetic materials. Strain localization and the associated generation of heat are important for the initiation of chemical reactions in this context. The crystal mechanics based model serves as a convenient testbed for the interactions among wave motion, slip kinetics, defect generation kinetics and physical length scale. After calibration to available molecular dynamics and single crystal gas gun data for HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine), the model is used to predict behaviors for the collapse of pores under various conditions. Implications for experimental observations are discussed. This document was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor Lawrence Livermore National Security, LLC, nor any of their employees makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or Lawrence Livermore National Security, LLC. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or Lawrence Livermore National Security, LLC, and shall not be used for advertising or product endorsement purposes.

  1. New liquid crystalline materials based on two generations of dendronised cyclophosphazenes.

    Science.gov (United States)

    Jiménez, Josefina; Laguna, Antonio; Gascón, Elena; Sanz, José Antonio; Serrano, José Luis; Barberá, Joaquín; Oriol, Luis

    2012-12-21

    A divergent approach was used for the synthesis of dendritic structures based on a cyclotriphosphazene core with 12 or 24 hydroxyl groups, by starting from [N(3)P(3)(OC(6)H(4)OH-4)(6)] and using an acetal-protected 2,2-di(hydroxymethyl)propionic anhydride as the acylating agent. Hydroxyl groups in these first- and second-generation dendrimers, G1-(OH)(12) or G2-(OH)(24), were then condensed in turn with mono- or polycatenar pro-mesogenic acids to study their ability to promote self-assembly into liquid crystalline structures. Reactions were monitored by using (31)P{(1)H} and (1)H NMR spectroscopy and the chemical structure of the resulting materials was confirmed by using different spectroscopic techniques and mass spectrometry (MALDI-TOF MS). The results were in accordance with monodisperse, fully functionalised cyclotriphosphazene dendrimers. Thermal and liquid crystalline properties were studied by using optical microscopy, differential scanning calorimetry and X-ray diffraction. The dendrimer with 12 4-pentylbiphenyl mesogenic units gives rise to columnar rectangular organisation, whereas the one with 24 pentylbiphenyl units does not exhibit mesomorphic behaviour. In the case of materials that contain polycatenar pro-mesogenic units with two aromatic rings (A4 vs. A5), the incorporation of a short flexible spacer connected to the periphery of the dendron (acid A5) was needed to achieve mesomorphic organisation. In this case, both dendrimer generations G1 A5 and G2 A5 exhibit a hexagonal columnar mesophase.

  2. Optically nonlinear materials

    CERN Document Server

    Whittam, A J

    2001-01-01

    susceptibility from 26 pm/V (same film without octadecanoic acid) to 40 pm/V. This increase in the second-order susceptibility occurred even though the amount of NLO-active dye was effectively diluted by the addition of the inactive octadecanoic acid. The wavelength of the absorption maximum ranged from 346-440 nm and there was direct correlation between the susceptibilities and the transparency of the films at the harmonic wavelength. Hemicyanine dyes were synthesised, with the general formulae: - (a) C sub 1 sub 8 H sub 3 sub 7 -A sup + -[CH=CH-C sub 6 H sub 4] sub x -N(CH sub 3) sub 2 I (b) C sub 1 sub 8 H sub 3 sub 7 -A sup + -[CH=CH] sub y -C sub 6 H sub 4 -N(CH sub 3) sub 2 I where A sup + is a pyridinium or isoquinolinium acceptor, and x = 1 or 2, and y = 1 or 2. The optically nonlinear dyes were investigated via the Langmuir-Blodgett (LB) technique. The dyes all produced isotherm data, with molecular areas of 22-60 A sup 2 per molecule, which are consistent with the cross-sectional areas of the chromo...

  3. Nonlinear optics and organic materials

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Y.R.

    1994-07-01

    We shall consider an interesting topic relating nonlinear optics and organic materials: how nonlinear optics can be used to study organic materials. One of the main differences between linear and nonlinear responses of a medium to incoming radiation is in their symmetries. It leads to the possibility that some properties of the medium could be more sensitively probed by nonlinear, rather than linear, optical means, or vise versa. A well-known example is that some vibrational modes of a medium could be Raman-active but infrared-inactive, and would be more readily observed by Raman scattering, which is a two-photon transition process. In this paper, we shall discuss, with the help of three examples, how we can use second harmonic generation (SHG) and sum frequency generation (SFG) to obtain unique information about a material. We shall focus on thin films, surfaces, and interfaces.

  4. Proceedings of the International Workshop on Structural Analyses Bridging over between Amorphous and Crystalline Materials (SABAC2008); January 10-11, 2008, Tokai-mura, Naka-gun, Ibaraki-ken, Japan, Techno Community Square "RICOTTI"

    OpenAIRE

    社本 真一; 樹神 克明

    2008-01-01

    International workshop entitled "Structural Analyses Bridging over between Amorphous and Crystalline Materials" (SABAC2008) was held on January 10 and 11, 2007 at Techno Community Square "RICOTTI" in Tokai. Amorphous and crystalline materials are studied historically by various approaches. Recent industrial functional materials such as optical memory material, thermoelectric material, hydrogen storage material, and ionic conductor have intrinsic atomic disorders in their lattices. These local...

  5. Simultaneous high crystallinity and sub-bandgap optical absorptance in hyperdoped black silicon using nanosecond laser annealing

    Energy Technology Data Exchange (ETDEWEB)

    Franta, Benjamin, E-mail: bafranta@gmail.com; Pastor, David; Gandhi, Hemi H.; Aziz, Michael J.; Mazur, Eric [School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States); Rekemeyer, Paul H.; Gradečak, Silvija [Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)

    2015-12-14

    Hyperdoped black silicon fabricated with femtosecond laser irradiation has attracted interest for applications in infrared photodetectors and intermediate band photovoltaics due to its sub-bandgap optical absorptance and light-trapping surface. However, hyperdoped black silicon typically has an amorphous and polyphasic polycrystalline surface that can interfere with carrier transport, electrical rectification, and intermediate band formation. Past studies have used thermal annealing to obtain high crystallinity in hyperdoped black silicon, but thermal annealing causes a deactivation of the sub-bandgap optical absorptance. In this study, nanosecond laser annealing is used to obtain high crystallinity and remove pressure-induced phases in hyperdoped black silicon while maintaining high sub-bandgap optical absorptance and a light-trapping surface morphology. Furthermore, it is shown that nanosecond laser annealing reactivates the sub-bandgap optical absorptance of hyperdoped black silicon after deactivation by thermal annealing. Thermal annealing and nanosecond laser annealing can be combined in sequence to fabricate hyperdoped black silicon that simultaneously shows high crystallinity, high above-bandgap and sub-bandgap absorptance, and a rectifying electrical homojunction. Such nanosecond laser annealing could potentially be applied to non-equilibrium material systems beyond hyperdoped black silicon.

  6. Diffusion mechanisms in crystalline materials. Materials Research Society symposium proceedings Volume 527

    Energy Technology Data Exchange (ETDEWEB)

    Mishin, Y.; Vogl, G.; Cowern, N.; Catlow, R.; Farkas, D. [eds.

    1998-07-01

    Solid-state diffusion often controls the evolution of the structure and properties of engineering materials, during both processing and the working lifetime of the engineered product. Diffusion characteristics of crystalline materials are critical for the manufacturing and operation of an enormous range of advanced products, from microelectronic devices to gas turbine blades. Although a large number of diffusion data has been accumulated over the years, many fundamental issues remain unresolved. This volume focuses on experimental and simulation techniques that provide access to atomic-scale mechanisms of diffusion in different classes of crystalline materials. Recent advances in the understanding of microscopic mechanisms of diffusion are reviewed and future research directions are discussed. more importantly, the volume features an exchange of ideas among the communities of diffusion scientists working with metals and metallic alloys, intermetallic compounds, semiconductors, ceramics and ionic materials. Topics include: diffusion mechanisms in metals and alloys; diffusion in intermetallic compounds; grain boundary and surface diffusion--diffusion in quasicrystals; diffusion in semiconductors; and diffusion in ionic conductivity and ionic materials.

  7. Chapter 1.1 Crystallinity of Nanocellulose Materials by Near-IR FT-Raman Spectroscopy

    Science.gov (United States)

    Umesh P. Agarwal; Richard S. Reiner; Sally A. Ralph

    2013-01-01

    Considering that crystallinity is one of the important properties that influence the end use of cellulose nanomaterials, it is important that the former be measured accurately. Recently, a new method based on near-IR FTRaman spectroscopy was proposed to determine cellulose I crystallinity. It was reported that in the Raman spectrum of cellulose materials, the...

  8. Handbook of the Properties of Optical Materials

    Science.gov (United States)

    1984-01-01

    EFFECTIVE MASS - - MOBILITY - - A-2 ARSEWIC SELENIOE (As2 Se3 ) OPTICAL PROPERTIES TRANSMISSION RANGE: 9 - 11n Optical Absorption Coefficient = 0.079...of 55 KRS-5 as a function of wavelength. A-2120 ZINC SELENIOE ZnSe 0 STRUCTURE CRYSTALLINE SYMMETRY = Cubic, 43m LATTICE CONSTANTS (A) = a = 5.667

  9. Organosilicon Polymeric Nonlinear Optical Materials for Optical Switching and Modulation

    Science.gov (United States)

    1994-02-28

    Organosilicon Polymeric Nonlinear Optical Materials for Optical C: F49620-93-C-0039 Switching and Modulation 6. AUTHOR(S) Mr. Sandip K. Sengupta, Dr...D FINAL REPORT for Organosilicon Polymeric Nonlinear Optical Materials for Optical Switching and Modulation Prepared for: USAF, AFMC (AFOSR) Air Force...34Organosilicon Polymeric Nonlinear Optical Materials for Optical Switching and Modulation," contract number F49620-93-C-0039. The work has been performed by Dr

  10. Structure/Property Relationships of Siloxane-Based Liquid Crystalline Materials

    Science.gov (United States)

    1992-05-01

    AD-A266 676 IImNflhIIIII WL-TR-92-4051 STRUCIUREIPROPERTY RELATIONSHIPS OF SILOXANE- BASED LIQUID CRYSTALLINE MATERIALS Timothy J. Bunning Herbert E...FUNDING NUMBERSSTRUCTURE/PROPERTY RELATIONSHIPS OF SILOXANE-BASED P: 612 LIQUID CRYSTALLINE MATERIALS PR: 624022 TA: 04 6 AUTHOR(S) W: 0 B unning, T.J...TY UISP1CTM D B DistbuationlI -vi Availability Codes Avail and/or Dist Special -Il V. SYNTHESIZED SILOXANE LIOUD CRYSTALLINE MATERIALS (Results and

  11. Enhanced light absorption in graphene via a liquid-crystalline optical diode

    Science.gov (United States)

    Pantazi, Aikaterini Iria; Yannopapas, Vassilios

    2016-09-01

    We demonstrate theoretically that light absorption in graphene can be boosted via a light-trapping mechanism based on a liquid-crystalline optical diode. The optical diode consists of twisted-nematic and nematic liquid-crystalline slabs. In particular, we show that, using a proper optical-diode setup, the absorption in a single graphene layer can be enhanced by a factor of four. By varying the pitch of the twisted-nematic liquid-crystalline slabs comprising the diode, one can tune the operating spectral region of the diode and thus enhance the absorption of graphene within a desired spectral window. Our calculations are based on Berreman's 4×4 method which treats anisotropic, isotropic and/ or inhomogeneous layered systems on equal footing.

  12. Highly ordered monodomain ionic self-assembled liquid-crystalline materials.

    Science.gov (United States)

    Zakrevskyy, Y; Smarsly, B; Stumpe, J; Faul, C F J

    2005-02-01

    Liquid-crystalline properties of the ionic self assembled complex benzenehexacarboxylic- (didodecyltrimethylammonium)6 [BHC- (C12D)6] were investigated by polarizing microscopy, differential scanning calorimetry (DSC), x-ray analysis, null ellipsometry, UV and IR spectroscopy. The complex exhibits a bilayer smectic Sm- A2 liquid-crystalline phase and aligns spontaneously. Alignment properties do not depend on the hydrophobic or hydrophilic treatment of the surfaces. The aligned complex possesses a negative (delta n=-0.02) homeotropically oriented optical axis, with layers aligned parallel to the surface. X-ray analysis of the aligned sample revealed a lamellar structure with a d spacing of 3.15 nm, consisting of sublayers of thicknesses d1 = 1.41 and d2 = 1.74 nm . This was confirmed by simple geometrical calculations and detailed temperature-dependent investigations, revealing that the first layer contains the BHC molecules and oppositely charged groups of the surfactants, and the second the alkyl tails of the surfactant. Changes in the order parameters (as calculated from the IR investigations) are correlated with the phase transitions as found by DSC. The properties of the complex are strongly influenced by the ionic interactions within the complex. The presence of these groups slows down the dynamics within the material sufficiently to allow for crystallization of the complex from an aligned LC phase into a single crystal domain, as well as restricting the transition to the isotropic phase.

  13. Optical analysis for few TMDC materials

    Indian Academy of Sciences (India)

    Mehul Dave

    2015-12-01

    The transition metal dichalcogenides possess layered structure of Se-M-Se (M = Nb, Mo, Ta and W) sandwich interact with each other by van der Waal forces and can also provide sites for intercalation. Because of their technological importance, lubricants, catalysts, battery cathodes and electrodes in the photoelectrochemical solar cells, much attention has gone in the studies of growth of these materials in crystalline and nanocrystalline forms. In the present work we report the growth of NbSe2, MoSe2, TaSe2 and WSe2 single crystals and determine the optical bandgap using optical absorption. The optical absorption of as-grown crystals has been measured at room temperature near the fundamental absorption edge. Both direct and indirect transitions are involved in the absorption process. The indirect transition was found to be allowed with two phonons involved in the process. The direct and indirect energy gaps and phonon energies for all crystals have been estimated. The results obtained are discussed in detail.

  14. Spatial ordering and abnormal optical activity of DNA liquid-crystalline dispersion particles

    Science.gov (United States)

    Semenov, S. V.; Yevdokimov, Yu. M.

    2016-12-01

    In our work, we investigate physicochemical and optical properties of double-strand DNA dispersions. The study of these properties is of biological interest, because it allows one to describe the characteristics of certain classes of chromosomes and DNA containing viruses. The package pattern of DNA molecules in the dispersions particles (DP) is examined. The consideration of the DNA liquid-crystalline DP optical activity based on the theory of electromagnetic wave absorption by large molecular aggregates has been performed. The investigation is also focused on various effects induced by the interaction between biological active compounds and DNA in the content of liquid-crystalline DP.

  15. Influence of adsorption thermodynamics on guest diffusivities in nanoporous crystalline materials

    NARCIS (Netherlands)

    R. Krishna; J.M. van Baten

    2013-01-01

    Published experimental data, underpinned by molecular simulations, are used to highlight the strong influence of adsorption thermodynamics on diffusivities of guest molecules inside ordered nanoporous crystalline materials such as zeolites, metal-organic frameworks (MOFs), and zeolitic imidazolate f

  16. Perylenediimide-surfactant complexes: thermotropic liquid-crystalline materials via ionic self-assembly.

    Science.gov (United States)

    Guan, Ying; Zakrevskyy, Yuriy; Stumpe, Joachim; Antonietti, Markus; Faul, Charl F J

    2003-04-07

    In this communication we present the facile preparation and characterisation of thermotropic liquid-crystalline materials from the ionic self-assembly of a charged perylenediimide derivative and oppositely charged surfactants.

  17. Liquid-crystalline ordering as a concept in materials science: from semiconductors to stimuli-responsive devices.

    Science.gov (United States)

    Fleischmann, Eva-Kristina; Zentel, Rudolf

    2013-08-19

    While the unique optical properties of liquid crystals (LCs) are already well exploited for flat-panel displays, their intrinsic ability to self-organize into ordered mesophases, which are intermediate states between crystal and liquid, gives rise to a broad variety of additional applications. The high degree of molecular order, the possibility for large scale orientation, and the structural motif of the aromatic subunits recommend liquid-crystalline materials as organic semiconductors, which are solvent-processable and can easily be deposited on a substrate. The anisotropy of liquid crystals can further cause a stimuli-responsive macroscopic shape change of cross-linked polymer networks, which act as reversibly contracting artificial muscles. After illustrating the concept of liquid-crystalline order in this Review, emphasis will be placed on synthetic strategies for novel classes of LC materials, and the design and fabrication of active devices.

  18. Extended point defects in crystalline materials: Ge and Si.

    Science.gov (United States)

    Cowern, N E B; Simdyankin, S; Ahn, C; Bennett, N S; Goss, J P; Hartmann, J-M; Pakfar, A; Hamm, S; Valentin, J; Napolitani, E; De Salvador, D; Bruno, E; Mirabella, S

    2013-04-12

    B diffusion measurements are used to probe the basic nature of self-interstitial point defects in Ge. We find two distinct self-interstitial forms--a simple one with low entropy and a complex one with entropy ∼30  k at the migration saddle point. The latter dominates diffusion at high temperature. We propose that its structure is similar to that of an amorphous pocket--we name it a morph. Computational modeling suggests that morphs exist in both self-interstitial and vacancylike forms, and are crucial for diffusion and defect dynamics in Ge, Si, and probably many other crystalline solids.

  19. Liquid-crystalline polymer holograms for high-density optical storage and photomechanical analysis

    Science.gov (United States)

    Shishido, A.; Akamatsu, N.

    2012-10-01

    We report linear and crosslinked azobenzene containing liquid-crystalline polymers which can be applied to high-density optical storage and photomechanical analysis. We introduced a molecular design concept of multicomponent systems composed of photoresponse, refactive-index change amplification, and transparency units. Taking advantage of characteristics of liquid crystals (optical anisotropy and cooperative motion), polarization holograms were recorded, which enabled us higher-density holographic storage. On the other hand, crosslinked liquid-crystalline azobenzene polymer films were fabricated to investigate the photomechanical behavior. We have found that a large change in Young's modulus is induced by several mol%-cis form production. Furthermore, a unique bending behavior, which cannot be explained by the conventional bending mechanism, was observed in the crosslinked liquid-crystalline polymer films with azobenzene in the side chain.

  20. Growth characteristics, optical properties, and crystallinity of thermal and plasma-enhanced ALD AIN films

    NARCIS (Netherlands)

    Van Bui, H.; Wiggers, F.B.; Aarnink, A.A.I.; Nguyen, M.D.; Jong, de M.P.; Kovalgin, A.Y.; Gupta, A.Y.

    2014-01-01

    Using real-time in-situ spectroscopic ellipsometry and ex-situ atomic force microscopy and X-ray diffraction, we have investigated the growth characteristics, especially ocusing on the initial growth (nucleation) regime, optical properties and crystalline structure of thin films of aluminum nitride

  1. Micro--structured crystalline resonators for optical frequency comb generation

    CERN Document Server

    Grudinin, Ivan S

    2014-01-01

    Optical frequency combs have recently been demonstrated in micro--resonators through nonlinear Kerr processes. Investigations in the past few years provided better understanding of micro--combs and showed that spectral span and mode locking are governed by cavity spectrum and dispersion. While various cavities provide unique advantages, dispersion engineering has been reported only for planar waveguides. In this Letter, we report a resonator design that combines dispersion control, mode crossing free spectrum, and ultra--high quality factor. We experimentally show that as the dispersion of a MgF2 resonator is flattened, the comb span increases reaching 700 nm with as low as 60 mW pump power at 1560 nm wavelength, corresponding to nearly 2000 lines separated by 46 GHz. The new resonator design may enable efficient low repetition rate coherent octave spanning frequency combs without the need for external broadening, ideal for applications in optical frequency synthesis, metrology, spectroscopy, and communicatio...

  2. Effect of Permeable Crystalline Material on Steel Reinforcement Corrosion of Concrete

    Institute of Scientific and Technical Information of China (English)

    YU Jian-ying; WANG Gui-ming

    2004-01-01

    Permeable crystalline materialcan permeate into pores and cracks of concrete and catalyze the reaction between Ca(OH) 2and unhydrated cement to generate a great quantity needle non-soluble crystals, which can stop up the pores and cracks of concrete, and increase the impermeability of concrete. This paper reported the results of a study conducted to evaluate steel reinforcement corrosion of concrete specimens uncoated and coated with permeable crystalline material as well as mixed with the permeable crystalline material. The properties evaluated for corrosion test were water impermeability, water absorption, compressive strength and potential. The results of water impermeability, water absorption, compressive strength clearly showed that the permeable crystalline material could prohibit water, any soluble salts and moisture from penetrating the concrete to cause corrosion, leaking, and other problems, and it did increase the compressive strength, which was favorable for protection of corrosion of reinforcing steel. Moreover, it was concluded from the potential-time curve that the steel reinforcement of uncoated specimen was in the state of activation whereas that of other specimens coated and mixed with the permeable crystalline material was in the state of inactivation. Above all, it was indicated that the permeable crystalline materialis very effective to protect the steel reinforcement of concrete from corrosion.

  3. Growth directions of microstructures in directional solidification of crystalline materials.

    Science.gov (United States)

    Deschamps, J; Georgelin, M; Pocheau, A

    2008-07-01

    In directional solidification, as the solidification velocity increases, the growth direction of cells or dendrites rotates from the direction of the thermal gradient to that of a preferred cristalline orientation. Meanwhile, their morphology varies with important implications for microsegregation. Here, we experimentally document the growth directions of these microstructures in a succinonitrile alloy in the whole accessible range of directions, velocities, and spacings. For this, we use a thin sample made of a single crystal on which the direction of the thermal gradient can be changed. This allows a fine monitoring of the misorientation angle between thermal gradient and preferred crystalline orientation. Data analysis shows evidence of an internal symmetry which traces back to a scale invariance of growth directions with respect to a Péclet number. This enables the identification of the relationship between growth directions and relevant variables, in fair agreement with experiment. Noticeable variations of growth directions with misorientation angles are evidenced and linked to a single parameter.

  4. Spectral Domain Optical Coherence Tomographic Findings of Bietti Crystalline Dystrophy

    Directory of Open Access Journals (Sweden)

    Ali Osman Saatci

    2014-01-01

    Full Text Available We analyzed the OCT features of 24 eyes of 12 patients with Bietti crystalline dystrophy (BCD with the Heidelberg HRA2-OCT. Seventeen of 24 eyes were in intermediate stage of the disease and seven in advanced stage of the disease at the time of latest OCT examination performed in 2014. Outer retinal tubulations and retinal hyperreflective dots were present in 20 of 24 eyes. The remaining four eyes had advanced disease with very thin retina. Appearance of bright plaque on top of RPE-Bruch membrane was present in all eyes. Choroidal hyperreflective spots were noted in 19 of 24 eyes. The remaining five eyes had advanced disease stage with very thin choroid. Mean central macular thickness was 163.08 μm ± 62.52 for all eyes (170.35 μm ± 56.46 in eyes with intermediate disease and 145.42 μm ± 77.2 in eyes with advanced disease. Mean subfoveal choroidal thickness was 95.37 μm ± 55.93 for the study eyes (116.47 ± 46.92 μm in eyes with intermediate disease and 44.14 μm ± 42.43 in eyes with advanced disease. Choroidal hyperreflective spots were noted in 21 of 24 eyes (87.5%. SD-OCT shows the disease progression in retinal and choroidal layers delicately in eyes with BCD and expands our knowledge about the ongoing disease process.

  5. Spectral domain optical coherence tomographic findings of bietti crystalline dystrophy.

    Science.gov (United States)

    Saatci, Ali Osman; Doruk, Hasan Can; Yaman, Aylin; Oner, Ferit Hakan

    2014-01-01

    We analyzed the OCT features of 24 eyes of 12 patients with Bietti crystalline dystrophy (BCD) with the Heidelberg HRA2-OCT. Seventeen of 24 eyes were in intermediate stage of the disease and seven in advanced stage of the disease at the time of latest OCT examination performed in 2014. Outer retinal tubulations and retinal hyperreflective dots were present in 20 of 24 eyes. The remaining four eyes had advanced disease with very thin retina. Appearance of bright plaque on top of RPE-Bruch membrane was present in all eyes. Choroidal hyperreflective spots were noted in 19 of 24 eyes. The remaining five eyes had advanced disease stage with very thin choroid. Mean central macular thickness was 163.08 μm ± 62.52 for all eyes (170.35 μm ± 56.46 in eyes with intermediate disease and 145.42 μm ± 77.2 in eyes with advanced disease). Mean subfoveal choroidal thickness was 95.37 μm ± 55.93 for the study eyes (116.47 ± 46.92 μm in eyes with intermediate disease and 44.14 μm ± 42.43 in eyes with advanced disease). Choroidal hyperreflective spots were noted in 21 of 24 eyes (87.5%). SD-OCT shows the disease progression in retinal and choroidal layers delicately in eyes with BCD and expands our knowledge about the ongoing disease process.

  6. H-Bonded Liquid Crystalline Polymer Network Materials

    Institute of Scientific and Technical Information of China (English)

    LIN Hong-Cheu; HENDRIANTO Jemmy

    2001-01-01

    @@Side-chain copolymers, poly(mOBA-co-mStilb)s, composed of proton acceptors (stilbazoles) and proton donors (benzoic acids) connected to polyacrylate backbone with different methylene spacer lengths (m = 6 and 10) were prepared in different donor/acceptor molar ratios. The H-bonded copolymeric networks were formed once they were synthesized, and showed more homogenous phase than the physical-blended supramolecular networks consisting of donor and acceptor homopolymers, i.e.H-bonded blends of PmOBA and PmStilb. In order to compare the effects of the backbone connection of these H-bonded copolymers and blends, we also built monomer-monomer and polymer-monomer H-bonded complexes of similar structures (shown in Fig. 1). DSC, POM, and powder XRD studies reveal that the copolymers (m = 10)with mole fractions of benzoic acids between 0.33-0.83 show the smectic A (SMA) phase with layer spacing values between 42.22A-50.47A (increases with higher H-bonded crosslinking density between benzoic acids and stilbazoles), while for m = 6, liquid crystalline behavior still can be observed at 0.89 molar fraction of benzoic acids. However, on the basis of powder XRD study it is found that the d spacing values of H-bonded copolymers with m = 6 in the SmA phase increase with higher molar ratios of benzoic acids, which is agreed with the formation of microphase separation due to the hydrogen bonds of benzoic acids connected themselves from the same backbone. The isotropization temperatures of the H-bonded copolymers and blends increase as the molar ratios of benzoic acids increase, while the higher crosslinking density of the H-bonded copolymeric networks and blends can stabilize the liquid crystalline phase.

  7. H-Bonded Liquid Crystalline Polymer Network Materials

    Institute of Scientific and Technical Information of China (English)

    LIN; Hong-Cheu

    2001-01-01

    Side-chain copolymers, poly(mOBA-co-mStilb)s, composed of proton acceptors (stilbazoles) and proton donors (benzoic acids) connected to polyacrylate backbone with different methylene spacer lengths (m = 6 and 10) were prepared in different donor/acceptor molar ratios. The H-bonded copolymeric networks were formed once they were synthesized, and showed more homogenous phase than the physical-blended supramolecular networks consisting of donor and acceptor homopolymers, i.e.H-bonded blends of PmOBA and PmStilb. In order to compare the effects of the backbone connection of these H-bonded copolymers and blends, we also built monomer-monomer and polymer-monomer H-bonded complexes of similar structures (shown in Fig. 1). DSC, POM, and powder XRD studies reveal that the copolymers (m = 10)with mole fractions of benzoic acids between 0.33-0.83 show the smectic A (SMA) phase with layer spacing values between 42.22A-50.47A (increases with higher H-bonded crosslinking density between benzoic acids and stilbazoles), while for m = 6, liquid crystalline behavior still can be observed at 0.89 molar fraction of benzoic acids. However, on the basis of powder XRD study it is found that the d spacing values of H-bonded copolymers with m = 6 in the SmA phase increase with higher molar ratios of benzoic acids, which is agreed with the formation of microphase separation due to the hydrogen bonds of benzoic acids connected themselves from the same backbone. The isotropization temperatures of the H-bonded copolymers and blends increase as the molar ratios of benzoic acids increase, while the higher crosslinking density of the H-bonded copolymeric networks and blends can stabilize the liquid crystalline phase.……

  8. Enhancing the piezoelectric properties of flexible hybrid AlN materials using semi-crystalline parylene

    Science.gov (United States)

    Jackson, Nathan; Mathewson, Alan

    2017-04-01

    Flexible piezoelectric materials are desired for numerous applications including biomedical, wearable, and flexible electronics. However, most flexible piezoelectric materials are not compatible with CMOS fabrication technology, which is desired for most MEMS applications. This paper reports on the development of a hybrid flexible piezoelectric material consisting of aluminium nitride (AlN) and a semi-crystalline polymer substrate. Various types of semi-crystalline parylene and polyimide materials were investigated as the polymer substrate. The crystallinity and surfaces of the polymer substrates were modified by micro-roughening and annealing in order to determine the effects on the AlN quality. The AlN crystallinity and piezoelectric properties decreased when the polymer surfaces were treated with O2 plasma. However, increasing the crystallinity of the parylene substrate prior to deposition of AlN caused enhanced c-axis (002) AlN crystallinity and piezoelectric response of the AlN. Piezoelectric properties of 200 °C annealed parylene-N substrate resulted in an AlN d 33 value of 4.87 pm V-1 compared to 2.17 pm V-1 for AlN on polyimide and 4.0 pm V-1 for unannealed AlN/parylene-N. The electrical response measurements to an applied force demonstrated that the parylene/AlN hybrid material had higher V pp (0.918 V) than commercial flexible piezoelectric material (PVDF) (V pp 0.36 V). The results in this paper demonstrate that the piezoelectric properties of a flexible AlN hybrid material can be enhanced by increasing the crystallinity of the polymer substrate, and the enhanced properties can function better than previous flexible piezoelectrics.

  9. Nanostructures formed on carbon-based materials with different levels of crystallinity using oxygen plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Tae-Jun [Institute for Multidisciplinary Convergence of Matter, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Department of Materials Science and Engineering, Seoul National University, Seoul 151-742 (Korea, Republic of); Jo, Wonjin; Lee, Heon Ju [Institute for Multidisciplinary Convergence of Matter, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Oh, Kyu Hwan [Department of Materials Science and Engineering, Seoul National University, Seoul 151-742 (Korea, Republic of); Moon, Myoung-Woon, E-mail: mwmoon@kist.re.kr [Institute for Multidisciplinary Convergence of Matter, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of)

    2015-09-01

    Nanostructure formation was explored for various carbon-based materials, such as diamond, carbon fiber, polyethylene terephthalate and poly (methyl methacrylate), which have different levels of crystallinity, ranging from perfect crystal to polymeric amorphous. After treatment of oxygen plasma glow discharge, the nanostructures on these carbon-based materials were found to evolve via preferential etching due to the co-deposition of metal elements sputtered from the metal cathode plate. Local islands or clusters formed by the metal co-deposition have a low etching rate compared to pristine regions on each material, resulting in anisotropic patterns on the carbon-based materials. This pattern formation mechanism was confirmed by covering the cathode or preventing the co-deposition of metallic sources with a polymeric material. Regardless of the level of crystallinity of the carbon-based materials, no patterns were observed on the surfaces covered with the polymeric material, and the surfaces were uniformly etched. It was found that the materials with low crystallinity had a high etching rate due to low carbon atom density, which thus easily formed high-aspect-ratio nanostructures for the same plasma treatment duration. - Highlight: • Reactive ion etching & metal deposition were occurred in oxygen plasma treatment. • High-aspect-ratio nanostructures can be fabricated on carbon-based materials. • Materials with low crystallinity easily formed high-aspect-ratio nanostructure. • Amount of etching inhibitors affects the pattern formation and configuration.

  10. A time-resolved infrared vibrational spectroscopic study of the photo-dynamics of crystalline materials.

    Science.gov (United States)

    Towrie, Mike; Parker, Anthony W; Ronayne, Kate L; Bowes, Katharine F; Cole, Jacqueline M; Raithby, Paul R; Warren, John E

    2009-01-01

    Time-resolved infrared vibrational spectroscopy is a structurally sensitive probe of the excited-state properties of matter. The technique has found many applications in the study of molecules in dilute solution phase but has rarely been applied to crystalline samples. We report on the use of a sensitive pump-probe time-resolved infrared spectrometer and sample handling techniques for studies of the ultrafast excited-state dynamics of crystalline materials. The charge transfer excited states of crystalline metal carbonyls and the proton transfer of dihydroxyquinones are presented and compared with the solution phase.

  11. Effect of substrate materials on rutile crystalline orientation in plasma-sprayed TiO2 coatings

    Institute of Scientific and Technical Information of China (English)

    YANG Guan-jun; LI Chang-jiu; WANG Yu-yue

    2004-01-01

    TiO2 coatings are of technical importance owing to their promising applications to photocatalytical, electrical, optical and tribological coatings. Thermal spraying process has been widely used to deposit both metallic and nonmetallic coatings. During thermal spraying, spray particle at fully or partially melted condition is projected to a substrate and subsequently flattens, rapidly cools and solidifies. Therefore, a coating in lamellar structure is usually formed as a quenched microstructure. TiO2 coatings were deposited on different substrates through plasma spraying with fused-crushed powder in rutile phase as feedstock to reveal the crystalline orientation in the coatings. XRD results show that the coatings consist of rutile phase with a fraction of anatase phase, and the rutile phase presents a preferable crystalline orientation along [101] direction. It is found that the orientation factors of rutile phase in the thin coatings are significantly influenced by substrate materials. The thick coatings yield the same orientation factors of 0.22 to 0.23 on all substrates in spite of substrate materials. It is considered that the thermal properties of substrate materials are the dominant factors for the preferable crystalline orientation in rutile phase within plasmasprayed TiO2 coating.

  12. All Optical Stabilization of a Soliton Frequency Comb in a Crystalline Microresonator

    CERN Document Server

    Jost, J D; Herr, T; Lecaplain, C; Brasch, V; Pfeiffer, M H P; Kippenberg, T J

    2015-01-01

    Microresonator based optical frequency combs (MFC) have demonstrated promise in extending the capabilities of optical frequency combs. Here we demonstrate all optical stabilization of a low noise temporal soliton based MFC in a crystalline resonator via a new technique to control the repetition rate. This is accomplished by thermally heating the microresonator with an additional probe laser coupled to an auxiliary optical resonator mode. The offset frequency is controlled by stabilization of the pump laser frequency to a reference optical frequency comb. We analyze the stabilization by performing an out of loop comparison and measure the overlapping Allan deviation. This all optical stabilization technique can prove useful as a low added noise actuator for self-referenced microresonator frequency combs.

  13. Optical and electrical properties of isotype crystalline molecular organic heterojunctions

    Science.gov (United States)

    Forrest, S. R.; Leu, L. Y.; So, F. F.; Yoon, W. Y.

    1989-12-01

    Optical and electronic properties of a p-P isotype heterojunctions (HJs) consisting of copper phthalocyanine (CuPc) and 3,4,9,10-perylene tetracarboxylic dianhydride (PTCDA) were investigated. It was found that the charge-transport properties of the HJ are limited by thermionic emission of holes over the energy barrier at the CuPc/PTCDA HJ at low forward and reverse bias, and by series resistance at high voltage. The HJ energy barrier at the CuPc/PTCDA valence-band edge, measured using current-volage and capacitance-voltage analyses, was found to be equal to 0.48 + or - 0.05 eV.

  14. Optical Input/Electrical Output Memory Elements based on a Liquid Crystalline Azobenzene Polymer.

    Science.gov (United States)

    Mosciatti, Thomas; Bonacchi, Sara; Gobbi, Marco; Ferlauto, Laura; Liscio, Fabiola; Giorgini, Loris; Orgiu, Emanuele; Samorì, Paolo

    2016-03-01

    Responsive polymer materials can change their properties when subjected to external stimuli. In this work, thin films of thermotropic poly(metha)acrylate/azobenzene polymers are explored as active layer in light-programmable, electrically readable memories. The memory effect is based on the reversible modifications of the film morphology induced by the photoisomerization of azobenzene mesogenic groups. When the film is in the liquid crystalline phase, the trans → cis isomerization induces a major surface reorganization on the mesoscopic scale that is characterized by a reduction in the effective thickness of the film. The film conductivity is measured in vertical two-terminal devices in which the polymer is sandwiched between a Au contact and a liquid compliant E-GaIn drop. We demonstrate that the trans → cis isomerization is accompanied by a reversible 100-fold change in the film conductance. In this way, the device can be set in a high- or low-resistance state by light irradiation at different wavelengths. This result paves the way toward the potential use of poly(metha)acrylate/azobenzene polymer films as active layer for optical input/electrical output memory elements.

  15. Effective elastic moduli and interface effects of nano- crystalline materials

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Many properties of nanocrystalline materials are associated with interface effects. Based on their microstructural features, the influence of interfaces on the effective elastic property of nanocrystalline materials is investigated. First, the Mori-Tanaka method is employed to determine the overall effective elastic moduli by considering a nanocrystalline material as a binary composite solid consisting of a crystal or inclusion phase with regular lattice connected by an amorphous-like interface or matrix phase. The effects of strain gradients are then examined on the effective elastic property by using the strain gradient theory to analyze a representative unit cell. Two interface mechanisms are elucidated that influence the effective stiffness and other mechanical properties of materials. One is the softening effect due to the distorted atomic structures and the increased atomic spacings in interface regions, and the other is the baffling effect due to the existence of boundary layers near interfaces.

  16. Thermotropic and lyotropic behaviour of new liquid-crystalline materials with different hydrophilic groups: synthesis and mesomorphic properties

    Directory of Open Access Journals (Sweden)

    Alexej Bubnov

    2013-02-01

    Full Text Available Several new calamitic liquid-crystalline (LC materials with flexible hydrophilic chains, namely either hydroxy groups or ethylene glycol units, or both types together, have been synthesized in order to look for new functional LC materials exhibiting both, thermotropic and lyotropic behaviour. Such materials are of high potential interest for challenging issues such as the self-organization of carbon nanotubes or various nanoparticles. Thermotropic mesomorphic properties have been studied by using polarizing optical microscopy, differential scanning calorimetry and X-ray scattering. Four of these nonchiral and chiral materials exhibit nematic and chiral nematic phases, respectively. For some molecular structures, smectic phases have also been detected. A contact sample of one of the prepared compounds with diethylene glycol clearly shows the lyotropic behaviour; namely a lamellar phase was observed. The relationship between the molecular structure and mesomorphic properties of these new LCs with hydrophilic chains is discussed.

  17. Thermotropic and lyotropic behaviour of new liquid-crystalline materials with different hydrophilic groups: synthesis and mesomorphic properties.

    Science.gov (United States)

    Bubnov, Alexej; Kašpar, Miroslav; Hamplová, Věra; Dawin, Ute; Giesselmann, Frank

    2013-01-01

    Several new calamitic liquid-crystalline (LC) materials with flexible hydrophilic chains, namely either hydroxy groups or ethylene glycol units, or both types together, have been synthesized in order to look for new functional LC materials exhibiting both, thermotropic and lyotropic behaviour. Such materials are of high potential interest for challenging issues such as the self-organization of carbon nanotubes or various nanoparticles. Thermotropic mesomorphic properties have been studied by using polarizing optical microscopy, differential scanning calorimetry and X-ray scattering. Four of these nonchiral and chiral materials exhibit nematic and chiral nematic phases, respectively. For some molecular structures, smectic phases have also been detected. A contact sample of one of the prepared compounds with diethylene glycol clearly shows the lyotropic behaviour; namely a lamellar phase was observed. The relationship between the molecular structure and mesomorphic properties of these new LCs with hydrophilic chains is discussed.

  18. Dancing with light advances in photofunctional liquid-crystalline materials

    CERN Document Server

    Yu, Haifeng

    2015-01-01

    Recent progress in this field indicates that integrating photochromic molecules into LC materials enables one to photo-manipulate unique features such as photoinduced phase transition, photocontrolled alignment and phototriggered molecular cooperative motion, leading to their novel applications beyond displays. This book introduces readers to this field, from the primary- to the advanced level in photoresponsive LC materials. The subject is introduced step-by-step, including the basic knowledge of LCs, photoresponsive properties of LCs, and their detailed performances in the form of low-molecu

  19. Local structure probes of nanoscale heterogeneity in crystalline materials.

    Science.gov (United States)

    Conradson, S; Espinosa, F; Villella, P

    2001-03-01

    In the conventional model of condensed matter increasing numbers of defects break down the order and ultimately convert perfect periodic crystals into aperiodic glasses. Local structure probes of a variety of materials with non-stoichiometric compositions, multiple degenerate ordering modes, or other symmetry breaking factors identify multiple ordered arrangements of atoms that render the materials heterogeneous on the nanometer scale. While exerting apparently negligible effects on bulk properties, this heterogeneity or phase separation does influence correlated or collective properties such as magnetism and phase stability.

  20. New nonlinear optical materials based on ferrofluids

    Energy Technology Data Exchange (ETDEWEB)

    Huang, J P [Department of Physics, Fudan University, Shanghai 200433 (China); Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz (Germany); Institute of Theoretical Physics, Chinese University of Hong Kong, Shatin, NT, Hong Kong (China); Yu, K W [Department of Physics, Chinese University of Hong Kong, Shatin, NT, Hong Kong (China); Institute of Theoretical Physics, Chinese University of Hong Kong, Shatin, NT, Hong Kong (China)

    2006-01-01

    We exploit theoretically a new class of magneto-controlled nonlinear optical material based on ferrofluids in which ferromagnetic nanoparticles are coated with a nonmagnetic metallic nonlinear shell. Such an optical material can have anisotropic nonlinear optical properties and a giant enhancement of nonlinearity, as well as an attractive figure of merit.

  1. Highly crystalline MOF-based materials grown on electrospun nanofibers

    Science.gov (United States)

    Bechelany, M.; Drobek, M.; Vallicari, C.; Abou Chaaya, A.; Julbe, A.; Miele, P.

    2015-03-01

    Supported Metal Organic Frameworks (MOFs) with a high specific surface area are of great interest for applications in gas storage, separation, sensing, and catalysis. In the present work we report the synthesis of a novel composite architecture of MOF materials supported on a flexible mat of electrospun nanofibers. The system, based on three-dimensional interwoven nanofibers, was designed by using a low-cost and scalable multistep synthesis protocol involving a combination of electrospinning and low-temperature atomic layer deposition of oxide materials, and their subsequent solvothermal conversion under either conventional or microwave-assisted heating. This highly versatile approach allows the production of different types of supported MOF crystals with controlled sizes, morphology, orientation and high accessibility.Supported Metal Organic Frameworks (MOFs) with a high specific surface area are of great interest for applications in gas storage, separation, sensing, and catalysis. In the present work we report the synthesis of a novel composite architecture of MOF materials supported on a flexible mat of electrospun nanofibers. The system, based on three-dimensional interwoven nanofibers, was designed by using a low-cost and scalable multistep synthesis protocol involving a combination of electrospinning and low-temperature atomic layer deposition of oxide materials, and their subsequent solvothermal conversion under either conventional or microwave-assisted heating. This highly versatile approach allows the production of different types of supported MOF crystals with controlled sizes, morphology, orientation and high accessibility. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr06640e

  2. Optical, crystalline perfection and mechanical studies on unidirectional grown bis(thiourea) cadmium zinc chloride single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Uthrakumar, R. [Department of Physics, Loyola College, Sterling Road, Nungambakkam, Chennai-600 034, Tamilnadu (India); Department of Physics, Sri Muthukumaran Institute of Technology, Chennai-600 069 (India); Vesta, C. [Department of Physics, SDNB Vaishnav College, Chennai-600 044 (India); Bhagavannarayana, G. [CGC Section, National Physical Laboratory, New Delhi-110 012 (India); Robert, R. [Department of Physics, Government Arts College, Krishnagiri-635 001 (India); Jerome Das, S., E-mail: sjeromedas2004@yahoo.com [Department of Physics, Loyola College, Sterling Road, Nungambakkam, Chennai-600 034, Tamilnadu (India)

    2011-02-03

    Research highlights: > Growth of bulk and optically clear single crystal of bis(thiourea) cadmium zinc chloride was successfully grown from aqueous solution by utilizing unidirectional crystal growth method. The title material belongs to orthorhombic crystal system with space group P2{sub 1}2{sub 1}2{sub 1}. The grown single crystal was free from structural grain boundaries with the FWHM value of the diffraction curve as 14 arc s. The optical transmission analysis indicates that BTCZC has a wide transparency window in the visible region with a lower cutoff wavelength at 250 nm. Hardness parameters have been calculated for the grown crystal. The dielectric studies reveal that BTCZC has low dielectric constant with fewer defects, and hence this crystal can be used as a potential material for optical applications. - Abstract: Optically transparent and bulk single crystal of bis(thiourea) cadmium zinc chloride was successfully grown by unidirectional crystal growth technique. The quality of the crystal was examined by high-resolution X-ray diffraction analysis. The cell parameters and the crystallinity of the grown crystal were estimated by the single-crystal and powder X-ray diffraction analyses, respectively. Optical transmittance of the crystal was recorded using the UV-vis-NIR spectrophotometer. The optical band gap and optical constant of the material were calculated by using transmission spectrum. Microhardness measurements were made for the grown crystal using Vicker's microhardness tester. The dielectric loss and dielectric constant measurements as a function of frequency and temperature were measured for the grown crystal.

  3. Perspective and potential of smart optical materials

    Science.gov (United States)

    Choi, Sang H.; Duzik, Adam J.; Kim, Hyun-Jung; Park, Yeonjoon; Kim, Jaehwan; Ko, Hyun-U.; Kim, Hyun-Chan; Yun, Sungryul; Kyung, Ki-Uk

    2017-09-01

    The increasing requirements of hyperspectral imaging optics, electro/photo-chromic materials, negative refractive index metamaterial optics, and miniaturized optical components from micro-scale to quantum-scale optics have all contributed to new features and advancements in optics technology. Development of multifunctional capable optics has pushed the boundaries of optics into new fields that require new disciplines and materials to maximize the potential benefits. The purpose of this study is to understand and show the fundamental materials and fabrication technology for field-controlled spectrally active optics (referred to as smart optics) that are essential for future industrial, scientific, military, and space applications, such as membrane optics, filters, windows for sensors and probes, telescopes, spectroscopes, cameras, light valves, light switches, and flat-panel displays. The proposed smart optics are based on the Stark and Zeeman effects in materials tailored with quantum dot arrays and thin films made from readily polarizable materials via ferroelectricity or ferromagnetism. Bound excitonic states of organic crystals are also capable of optical adaptability, tunability, and reconfigurability. To show the benefits of smart optics, this paper reviews spectral characteristics of smart optical materials and device technology. Experiments testing the quantum-confined Stark effect, arising from rare earth element doping effects in semiconductors, and applied electric field effects on spectral and refractive index are discussed. Other bulk and dopant materials were also discovered to have the same aspect of shifts in spectrum and refractive index. Other efforts focus on materials for creating field-controlled spectrally smart active optics on a selected spectral range. Surface plasmon polariton transmission of light through apertures is also discussed, along with potential applications. New breakthroughs in micro scale multiple zone plate optics as a micro

  4. Synthesis and Characterization of Ferrocene-Containing Liquid Crystalline Materials with a Bromo-phenyl Moiety

    Institute of Scientific and Technical Information of China (English)

    ZHAO,Ke-Qing(赵可清); HU,Ping(胡平); XU,Hong-Bo(许洪波); ZHANG,Liang-Fu(张良辅)

    2002-01-01

    Ten ferrocene-containing liquid crystalline materials, pFcC6H4CO2C6H4N= CHC6H4O2CC6H3BrOCnH2n + 1 ( type Ⅰ)and p-FcC6H4N = CHC6H4O2CC6H3BrOCnH2n+1 ( type Ⅱ),were synthesized by condensation reactions of two ferrocenesubstituted amines, p-FcC6H4CO2C6H4NH2 ( 4 ) and pFcC6H4NH2(5) (Fc: ferrocenyl) with five bromo-substituted benzaldehydes (3) (H2n+1CnOC6H3BrCOOC6H4CHO, n = 2,4, 6, 8 and 10). Their mesogenic behaviors were studied by hot-stage polarized optical microscopy and differential scanning calorimetry. The effects of structure (rigid core, terminal chain length) on the phase transition behaviors were discussed.

  5. Deconfinement and quantum liquid crystalline states of dipolar fermions in optical lattices

    OpenAIRE

    2009-01-01

    We describe a simple model of fermions in quasi-one dimension that features interaction induced deconfinement (a phase transition where the effective dimensionality of the system increases as interactions are turned on) and which can be realised using dipolar fermions in an optical lattice. The model provides a relisation of a "soft quantum matter" phase diagram of strongly-correlated fermions, featuring meta-nematic, smectic and crystalline states, in addition to the normal Fermi liquid. In ...

  6. Influence of the Integration Limits on the Shape of Pair Correlation Functions of Non-Crystalline Materials

    Science.gov (United States)

    2001-06-01

    Correlation Functions of Non- Crystalline Materials DISTRIBUTION: Approved for public release, distribution unlimited This paper is part of the...PAIR CORRELATION FUNCTIONS OF NON- CRYSTALLINE MATERIALS W. Hoyer, I. Kaban, Th. Halm Institute of Physics, TU - Chemnitz, D-09107, Chemnitz, Germany...correlation functions of the non- crystalline materials with low-coordinated (open) structure. Liquid Te and amorphous Ge-telluride have been chosen for

  7. Point Defect Phenomena of Crystalline Structure in Some Common Structural Materials

    Institute of Scientific and Technical Information of China (English)

    RUAN Yu-Zhong; WU Ren-Ping; YU Yan

    2005-01-01

    The existence and its movement rule of crystalline structure defect are closely related to the diffusion, solid phase reaction, sintering, phase transformation as well as the physical and chemical properties of materials. Point defect theory has been widely applied in material mineralization research, unfavorable transformation controlling, material modification,the research and development of new materials and so on. Point defect theory is one of the important theories for new material research and development. Herein we mainly discuss the application of point defect theory in some structural material researches.

  8. Optical bandgap of ultra-thin amorphous silicon films deposited on crystalline silicon by PECVD

    Directory of Open Access Journals (Sweden)

    Yaser Abdulraheem

    2014-05-01

    Full Text Available An optical study based on spectroscopic ellipsometry, performed on ultrathin hydrogenated amorphous silicon (a-Si:H layers, is presented in this work. Ultrathin layers of intrinsic amorphous silicon have been deposited on n-type mono-crystalline silicon (c-Si wafers by plasma enhanced chemical vapor deposition (PECVD. The layer thicknesses along with their optical properties –including their refractive index and optical loss- were characterized by spectroscopic ellipsometry (SE in a wavelength range from 250 nm to 850 nm. The data was fitted to a Tauc-Lorentz optical model and the fitting parameters were extracted and used to compute the refractive index, extinction coefficient and optical bandgap. Furthermore, the a-Si:H film grown on silicon was etched at a controlled rate using a TMAH solution prepared at room temperature. The optical properties along with the Tauc-Lorentz fitting parameters were extracted from the model as the film thickness was reduced. The etch rate for ultrathin a-Si:H layers in TMAH at room temperature was found to slow down drastically as the c-Si interface is approached. From the Tauc-Lorentz parameters obtained from SE, it was found that the a-Si film exhibited properties that evolved with thickness suggesting that the deposited film is non-homogeneous across its depth. It was also found that the degree of crystallinity and optical (Tauc bandgap increased as the layers were reduced in thickness and coming closer to the c-Si substrate interface, suggesting the presence of nano-structured clusters mixed into the amorphous phase for the region close to the crystalline silicon substrate. Further results from Atomic Force Microscopy and Transmission Electron Microscopy confirmed the presence of an interfacial transitional layer between the amorphous film and the underlying substrate showing silicon nano-crystalline enclosures that can lead to quantum confinement effects. Quantum confinement is suggested to be the cause

  9. Structural and Optical Properties of Single Crystalline Bismuth Nanoparticles in Polymer

    Science.gov (United States)

    Kabir, Lutful; Mandal, Swapan K.

    We report here the structural and optical properties of Bi nanoparticles in polymer (polypyrrole) matrix. The nanoparticles are synthesized following a wet chemical route. The X-ray diffraction data clearly shows the growth of single crystalline Bi nanoparticles within the host polymer. The microstructure of the Bi nanoparticles obtained by transmission electron microscopy (TEM) reveals clearly the formation of spherical shaped nanoparticles of average size˜27 nm with a narrow size distribution. The optical absorption spectrum exhibits a distinct peak at 278 nm which is attributed to the surface plasmon band of Bi nanoparticles. The absorption spectrum is found to be described well following Mie theory.

  10. Optical bandgap of ultra-thin amorphous silicon films deposited on crystalline silicon by PECVD

    Energy Technology Data Exchange (ETDEWEB)

    Abdulraheem, Yaser, E-mail: yaser.abdulraheem@kuniv.edu.kw [Electrical Engineering Department, College of Engineering and Petroleum, Kuwait University. P.O. Box 5969, 13060 Safat (Kuwait); Gordon, Ivan; Bearda, Twan; Meddeb, Hosny; Poortmans, Jozef [IMEC, Kapeldreef 75, 3001, Leuven (Belgium)

    2014-05-15

    An optical study based on spectroscopic ellipsometry, performed on ultrathin hydrogenated amorphous silicon (a-Si:H) layers, is presented in this work. Ultrathin layers of intrinsic amorphous silicon have been deposited on n-type mono-crystalline silicon (c-Si) wafers by plasma enhanced chemical vapor deposition (PECVD). The layer thicknesses along with their optical properties –including their refractive index and optical loss- were characterized by spectroscopic ellipsometry (SE) in a wavelength range from 250 nm to 850 nm. The data was fitted to a Tauc-Lorentz optical model and the fitting parameters were extracted and used to compute the refractive index, extinction coefficient and optical bandgap. Furthermore, the a-Si:H film grown on silicon was etched at a controlled rate using a TMAH solution prepared at room temperature. The optical properties along with the Tauc-Lorentz fitting parameters were extracted from the model as the film thickness was reduced. The etch rate for ultrathin a-Si:H layers in TMAH at room temperature was found to slow down drastically as the c-Si interface is approached. From the Tauc-Lorentz parameters obtained from SE, it was found that the a-Si film exhibited properties that evolved with thickness suggesting that the deposited film is non-homogeneous across its depth. It was also found that the degree of crystallinity and optical (Tauc) bandgap increased as the layers were reduced in thickness and coming closer to the c-Si substrate interface, suggesting the presence of nano-structured clusters mixed into the amorphous phase for the region close to the crystalline silicon substrate. Further results from Atomic Force Microscopy and Transmission Electron Microscopy confirmed the presence of an interfacial transitional layer between the amorphous film and the underlying substrate showing silicon nano-crystalline enclosures that can lead to quantum confinement effects. Quantum confinement is suggested to be the cause of the observed

  11. Luminescent liquid crystalline materials based on palladium(II) imine derivatives containing the 2-phenylpyridine core.

    Science.gov (United States)

    Micutz, Marin; Iliş, Monica; Staicu, Teodora; Dumitraşcu, Florea; Pasuk, Iuliana; Molard, Yann; Roisnel, Thierry; Cîrcu, Viorel

    2014-01-21

    In this work we report our studies concerning the synthesis and characterisation of a series of imine derivatives that incorporate the 2-phenylpyridine (2-ppy) core. These derivatives were used in the cyclometalating reactions of platinum(II) or palladium(II) in order to prepare several complexes with liquid crystalline properties. Depending on the starting materials used as well as the solvents employed, different metal complexes were obtained, some of them showing both liquid crystalline behaviour and luminescence properties at room temperature. It was found that, even if there are two competing coordination sites, the cyclometalation process takes place always at the 2-ppy core with (for Pt) or without (for Pd) the imine bond cleavage. We successfully showed that it is possible to prepare emissive room temperature liquid crystalline materials based on double cyclopalladated heteroleptic complexes by varying the volume fraction of the long flexible alkyl tails on the ancillary benzoylthiourea (BTU) ligands.

  12. Adaptive optics imaging of the outer retinal tubules in Bietti's crystalline dystrophy.

    Science.gov (United States)

    Battu, R; Akkali, M C; Bhanushali, D; Srinivasan, P; Shetty, R; Berendschot, T T J M; Schouten, J S A G; Webers, C A

    2016-05-01

    PurposeTo study the outer retinal tubules using spectral domain optical coherence tomography and adaptive optics and in patients with Bietti's crystalline dystrophy.MethodsTen eyes of five subjects from five independent families with Bietti's crystalline Dystrophy (BCD) were characterized with best-corrected visual acuity (BCVA), full-field electroretinography, and fundus autofluorescence (FAF). High-resolution images were obtained with the spectral domain optical coherence tomography (SD-OCT) and adaptive optics (AO).ResultsSD-OCT showed prominent outer retinal layer loss and outer retinal tubulations at the margin of outer retinal loss. AO images displayed prominent macrotubules and microtubules with characteristic features in eight out of the 10 eyes. Crystals were present in all ten eyes. There was a reduction in the cone count in all eyes in the area outside the outer retinal tubules (ORT).ConclusionsThis study describes the morphology of the outer retinal tubules when imaged enface on the adaptive optics in patients with BCD. These findings provide insight into the macular structure of these patients. This may have prognostic implications and refine the study on the pathogenesis of BCD.

  13. Progress Toward Single-Photon-Level Nonlinear Optics in Crystalline Microcavities

    Science.gov (United States)

    Kowligy, Abijith S.

    excess of 500 ns for all the three waves in the interaction, provided a cavity of radius R 100 mum, whereas for the smaller disks, additional rigorous polishing may be required. We also fabricated resonators as small as R ˜ 40 mum via this method. In a millimeter-sized resonator, we experimentally demonstrated triply resonant sum-frequency generation, which allowed for an observation of the classical manifestation of the quantum Zeno effect, wherein line-splitting occurs due to the high efficiency intracavity frequency conversion. For the sub-100 mum resonators, we present phase-matching calculations and dispersion-management techniques using analytical approximations and rigorous finite-element-method simulations. Experimentally, Q -factor measurements are shown, and we identify the specific short-comings of the fabrication procedure that may have led to the lower, surface-roughness-limited Q-factors. Finally, we identify pathways toward achieving the single-photon-level nonlinear optics using off-resonant nonlinear optics, which requires the simultaneous realization of phase-matching, large cavity lifetimes, and small mode volumes. We believe this would be feasible in the near future as more advanced fabrication and processing methods are developed for crystalline materials and novel nonlinear crystals are synthesized.

  14. Ab initio study of the optical properties of crystalline phenanthrene, including the excitonic effects

    Science.gov (United States)

    Dadsetani, Mehrdad; Nejatipour, Hajar; Ebrahimian, Ali

    2015-05-01

    Using the ab initio methods for solving the Bethe-Salpeter equation on the basis of the FPLAPW method, optical properties of crystalline phenanthrene were calculated, in a comparison to its isomer, anthracene. It was found that despite the similarity of the structural, electronic, and the overall optical properties in a 40 eV energy range, phenanthrene and anthracene show significant differences in their optical spectra in the energy range below band gaps. Phenanthrene has two spin singlet excitonic features whereas anthracene shows one. The singlet and the lowest triplet binding energies of phenanthrene were found to be larger than anthracene. In this study, in addition, a comparison has been made between the optical spectra in RPA and the existing experimental data.

  15. Photochromic hybrid organic-inorganic liquid-crystalline materials built from nonionic surfactants and polyoxometalates: elaboration and structural study.

    Science.gov (United States)

    Poulos, Andreas S; Constantin, Doru; Davidson, Patrick; Impéror, Marianne; Pansu, Brigitte; Panine, Pierre; Nicole, Lionel; Sanchez, Clément

    2008-06-17

    This work reports the elaboration and structural study of new hybrid organic-inorganic materials constructed via the coupling of liquid-crystalline nonionic surfactants and polyoxometalates (POMs). X-ray scattering and polarized light microscopy demonstrate that these hybrid materials, highly loaded with POMs (up to 18 wt %), are nanocomposites of liquid-crystalline lamellar structure (Lalpha), with viscoelastic properties close to those of gels. The interpretation of X-ray scattering data strongly suggests that the POMs are located close to the terminal -OH groups of the nonionic surfactants, within the aqueous sublayers. Moreover, these materials exhibit a reversible photochromism associated to the photoreduction of the polyanion. The photoinduced mixed-valence behavior has been characterized through ESR and UV-visible-near-IR spectroscopies that demonstrate the presence of W(V) metal cations and of the characteristic intervalence charge transfer band in the near-IR region, respectively. These hybrid nanocomposites exhibit optical properties that may be useful for applications involving UV-light-sensitive coatings or liquid-crystal-based photochromic switches. From a more fundamental point of view, these hybrid materials should be very helpful models for the study of both the static and dynamic properties of nano-objects confined within soft lamellar structures.

  16. Free-surface molecular command systems for photoalignment of liquid crystalline materials.

    Science.gov (United States)

    Fukuhara, Kei; Nagano, Shusaku; Hara, Mitsuo; Seki, Takahiro

    2014-01-01

    The orientation of liquid crystal molecules is very sensitive towards contacting surfaces, and this phenomenon is critical during the fabrication of liquid crystal display panels, as well as optical and memory devices. To date, research has focused on designing and modifying solid surfaces. Here we report an approach to control the orientation of liquid crystals from the free (air) surface side: a skin layer at the free surface was prepared using a non-photoresponsive liquid crystalline polymer film by surface segregation or inkjet printing an azobenzene-containing liquid crystalline block copolymer. Both planar-planar and homoeotropic-planar mode patterns were readily generated. This strategy is applicable to various substrate systems, including inorganic substrates and flexible polymer films. These versatile processes require no modification of the substrate surface and are therefore expected to provide new opportunities for the fabrication of optical and mechanical devices based on liquid crystal alignment.

  17. Novel family of solid acid catalysts: substantially amorphous or partially crystalline zeolitic materials

    CSIR Research Space (South Africa)

    Nicolaides, CP

    1999-01-01

    Full Text Available of the samples obtained at the various temperatures showed that for synthesis temperatures of up to 70 degrees C, X-ray amorphous aluminosilicates were obtained, whereas treatment at 90 degrees C produced a material exhibiting a 2% XRD crystallinity. Higher...

  18. Crystalline Whispering Gallery Mode Resonators: In Search of The Optimal Material

    CERN Document Server

    Ilchenko, V S; Matsko, A B; Maleki, L

    2014-01-01

    Different applications of crystalline whispering gallery mode resonators call for different properties of the resonator host material. We report on our recent study of resonators made out of sapphire, diamond, and quartz crystals and discuss possible applications of these resonators. In particular, we demonstrate Kerr frequency comb generation in sapphire microresonators.

  19. The Maxwell-Stefan description of mixture diffusion in nanoporous crystalline materials

    NARCIS (Netherlands)

    Krishna, R.

    2014-01-01

    The efficacy of nanoporous crystalline materials in separation applications is often influenced to a significant extent by diffusion of guest molecules within the pores of the structural frameworks. The Maxwell-Stefan (M-S) equations provide a fundamental and convenient description of mixture diffus

  20. In Situ and Ex Situ Syntheses of Magnetic Liquid Crystalline Materials: A Comparison

    Directory of Open Access Journals (Sweden)

    Monique Mauzac

    2012-02-01

    Full Text Available Magnetic hybrid liquid crystalline composites have been obtained either by thermal decomposition of a cobalt precursor in a solution containing a liquid crystal polymer or by dispersing preformed cobalt nanorods in a liquid crystal polymer matrix. The final materials are all mesomorphous and ferromagnetic. Their magnetic characteristics are compared as a function of the synthesis method.

  1. A Smörgåsbord of Separation Strategies Using Microporous Crystalline Materials

    NARCIS (Netherlands)

    Krishna, R.

    2014-01-01

    Ordered crystalline microporous materials such as zeolites, metal-organic frameworks and zeolitic imidazolate frameworks, with pores in the 3-20 Å range, offer considerable potential for use in a wide variety of separations in the process industries. For many separation tasks, microporous adsorbents

  2. Anion-directed self-organization of thermotropic liquid crystalline materials containing a guanidinium moiety.

    Science.gov (United States)

    Kim, Dongwoo; Jon, Sangyong; Lee, Hyung-Kun; Baek, Kangkyun; Oh, Nam-Keun; Zin, Wang-Cheol; Kim, Kimoon

    2005-11-28

    New wedge-shaped thermotropic liquid crystalline materials containing a guanidinium moiety at the apex organize into various supramolecular structures such as hexagonal columnar, rectangular columnar and Pm3n cubic mesophases depending on anions illustrating guest-directed self-organization in mesophases.

  3. Early dynamics of guest-host interaction in dye-doped liquid crystalline materials.

    Science.gov (United States)

    Truong, Thai V; Xu, Lei; Shen, Y R

    2003-05-16

    We have studied in detail the early dynamics of laser-induced molecular reorientation in a dye-doped liquid crystalline (LC) medium that exhibits a significant enhancement of the optical Kerr nonlinearity due to guest-host interaction. Experimental results agree quantitatively with theory based on a model in which the anisotropic dye excitation helps reorient the LC molecules through a mean-field intermolecular interaction.

  4. Applications of Non-Crystalline Materials — A. APPLICATIONS OF GLASSES, AMORPHOUS AND DISORDERED MATERIALS

    Science.gov (United States)

    Ovshinsky, Stanford R.

    The following sections are included: * Introduction * Information Technology * History * Phase change erasable optical memory * Basic physical process * Materials * Direct-overwrite recording * Device configurations * Structural analysis * Thermal stability * Phase transformation kinetics induced by a laser diode * Media performance * Manufacturing * Commercial applications * The Ovonic threshold switch * The Ovonic electronic phase change memory * Data storage mechanism * Basic device operation * Commercial applications of Ovonic unified semiconductor memories * Amorphous silicon alloy diode and TFT AMLCD display addressing * Long-life amorphous silicon alloy copier drums * Energy Generation and Storage * Amorphous silicon alloy thin-film photovoltaics * Introduction * Using science and technology to break the cost barrier * Multi-phase disordered hydrogen storage materials * Ovonic nickel metal-hydride batteries * NiMH cell chemistry * Metal hydride alloy development * Positive electrode development * Hydrogen storage for fuel cell applications * Fuel cells * The fuel * Conclusion * Acknowledgments * References

  5. Mapping the Optical Absorption of a Substrate-Transferred Crystalline AlGaAs Coating at 1.5um

    CERN Document Server

    Steinlechner, Jessica; Bell, Angus; Cole, Garrett; Hough, Jim; Penn, Steven; Rowan, Sheila; Steinlechner, Sebastian

    2014-01-01

    The sensitivity of 2nd and 3rd generations of interferometric gravitational wave detectors will be limited by thermal noise of the test-mass mirrors and highly reflective coatings. Recently developed crystalline coatings show a promising thermal noise reduction compared to presently used amorphous coatings. However, stringent requirements apply to the optical properties of the coatings as well. We have mapped the optical absorption of a crystalline AlGaAs coating which is optimized for high reflectivity for a wavelength of 1064nm. The absorption was measured at 1550nm where the coating stack transmits approximately 70% of the laser light. The measured absorption was lower than (30.2 +/- 11.1)ppm which is equivalent to (3.6 +/- 1.3)ppm for a coating stack that is highly reflective at 1530nm. While this is a very promising low absorption result for alternative low--loss coating materials, further work will be necessary to reach the requirements of <1ppm for future gravitational wave detectors.

  6. Phase behaviour of macromolecular liquid crystalline materials. Computational studies at the molecular level

    CERN Document Server

    Stimson, L M

    2003-01-01

    Molecular simulations provide an increasingly useful insight into the static and dynamic characteristics of materials. In this thesis molecular simulations of macro-molecular liquid crystalline materials are reported. The first liquid crystalline material that has been investigated is a side chain liquid crystal polymer (SCLCP). In this study semi-atomistic molecular dynamics simulations have been conducted at a range of temperatures and an aligning potential has been applied to mimic the effect of a magnetic field. In cooling the SCLCP from an isotropic melt, microphase separation was observed yielding a domain structure. The application of a magnetic field to this structure aligns the domains producing a stable smectic mesophase. This is the first study in which mesophases have been observed using an off-lattice model of a SCLCP. The second material that has been investigated is a dendrimer with terminal mesogenic functionalization. Here, a multi-scale approach has been taken with Monte Carlo studies of a s...

  7. Optical and transport properties correlation driven by amorphous/crystalline disorder in InP nanowires

    Science.gov (United States)

    Kamimura, H.; Gouveia, R. C.; Carrocine, S. C.; Souza, L. D.; Rodrigues, A. D.; Teodoro, M. D.; Marques, G. E.; Leite, E. R.; Chiquito, A. J.

    2016-11-01

    Indium phosphide nanowires with a single crystalline zinc-blend core and polycrystalline/amorphous shell were grown from a reliable route without the use of hazardous precursors. The nanowires are composed by a crystalline core covered by a polycrystalline shell, presenting typical lengths larger than 10 μm and diameters of 80-90 nm. Raman spectra taken from as-grown nanowires exhibited asymmetric line shapes with broadening towards higher wave numbers which can be attributed to phonon localization effects. It was found that optical phonons in the nanowires are localized in regions with average size of 3 nm, which seems to have the same order of magnitude of grain sizes in the polycrystalline shell. Regardless of the fact that the nanowires exhibit a crystalline core, any considerable degree of disorder can lead to a localized behaviour of carriers. In consequence, the variable range hopping was observed as the main transport instead of the usual thermal excitation mechanisms. Furthermore the hopping length was ten times smaller than nanowire cross-sections, confirming that the nanostructures do behave as a 3D system. Accordingly, the V-shape observed in PL spectra clearly demonstrates a very strong influence of the potential fluctuations on the exciton optical recombination. Such fluctuations can still be observed at low temperature regime, confirming that the amorphous/polycrystalline shell of the nanowires affects the exciton recombination in every laser power regime tested.

  8. Ab initio calculations of the optical properties of crystalline and liquid InSb

    Energy Technology Data Exchange (ETDEWEB)

    Sano, Haruyuki, E-mail: h-sano@ishikawa-nct.ac.jp [National Institute of Technology, Ishikawa College, Kitacyujo, Tsubata, Ishikawa 929-0392 (Japan); Mizutani, Goro [School of Materials Science, Japan Advanced Institute of Science and Technology, Tatsunokuchi, Ishikawa 923-1292 (Japan)

    2015-11-15

    Ab initio calculations of the electronic and optical properties of InSb were performed for both the crystalline and liquid states. Two sets of atomic structure models for liquid InSb at 900 K were obtained by ab initio molecular dynamics simulations. To reduce the effect of structural peculiarities in the liquid models, an averaging of the two sets of the calculated electronic and optical properties corresponding to the two liquid models was performed. The calculated results indicate that, owing to the phase transition from crystal to liquid, the density of states around the Fermi level increases. As a result, the energy band gap opening near the Fermi level disappears. Consequently, the optical properties change from semiconductor to metallic behavior. Namely, owing to the melting of InSb, the interband transition peaks disappear and a Drude-like dispersion is observed in the optical dielectric functions. The optical absorption at a photon energy of 3.06 eV, which is used in Blu-ray Disc systems, increases owing to the melting of InSb. This increase in optical absorption is proposed to result from the increased optical transitions below 2 eV.

  9. Photorefractive optics materials, properties, and applications

    CERN Document Server

    Yu, Francis T S

    1999-01-01

    The advances of photorefractive optics have demonstrated many useful and practical applications, which include the development of photorefractive optic devices for computer communication needs. To name a couple significant applications: the large capacity optical memory, which can greatly improve the accessible high-speed CD-ROM and the dynamic photorefractive gratings, which can be used for all-optic switches for high-speed fiber optic networks. This book is an important reference both for technical and non-technical staffs who are interested in this field. * Covers the recent development in materials, phenomena, and applications * Includes growth, characterization, dynamic gratings, and liquid crystal PR effect * Includes applications to photonic devices such as large capacity optical memory, 3-D interconnections, and dynamic holograms * Provides the recent overall picture of current trends in photorefractive optics * Includes optical and electronic properties of the materials as applied to dynamic photoref...

  10. Design of Organic Nonlinear Optical Materials

    Science.gov (United States)

    1990-06-01

    This project deals with a new approach to designing organic nonlinear optical materials for second harmonic generation based on the use of hydrogen...patterns for even simple organic molecules. For organic nonlinear optical materials this dilemma means that even the most promising organic molecule may

  11. IMPROVEMENT OF THE CRYSTALLINITY AND OPTICAL PARAMETERS OF ZnO FILM WITH ALUMINUM DOPING

    OpenAIRE

    Ilican, Saliha

    2016-01-01

    In this study, the undoped and Aluminum (Al) doped (1% and 3%) zinc oxide (ZnO) films were prepared by sol gel method via spin coating onto glass substrates. To investigate the structural and optical properties of the films, it was used to X-ray diffractometer and UV-vis spectrophotometer, respectively. The prepared ZnO films are polycrystalline with a hexagonal wurtzite structure with a preferential orientation according to the (002) plane. The crystalline quality of ZnO film was improved by...

  12. The formation and interpretation of defect images from crystalline materials in a scanning transmission electron microscope.

    Science.gov (United States)

    Maher, D M; Joy, D C

    1976-06-01

    The technique of scanning transmission electron microscopy (STEM) has been employed usefully in studies of amorphous materials, and the theory of image formation and interpretation in this case has been well developed. Less attention has been given to the practical and theoretical problems associated with the use of STEM for the examination of crystalline materials. In this case the contrast mechanisms are dominated by Bragg diffraction and so they are quite different from those occurring in amorphous substances. In this paper practical techniques for the observation and interpretation of contrast from defects in crystalline materials are discussed. It is shown that whilst images of defects are obtained readily under all typical STEM operating conditions, the form of the image and the information it contains varies with the angle subtended at the specimen by the detector. If this angle is too large significant image modifications relative to the "conventional" transmission electron microscope case may occur and the resolution of the image may degrade. If this angle is too small, then signal to noise considerations make an interpretation of the image difficult. In this paper we indicate how the detector angle may be chosen correctly, and also present techniques for setting up a STEM instrument for imaging a crystalline material containing lattice defects.

  13. Rapid resorbable, glassy crystalline materials on the basis of calcium alkali orthophosphates.

    Science.gov (United States)

    Berger, G; Gildenhaar, R; Ploska, U

    1995-11-01

    Materials based on calcium orthophosphates have been developed to crystallize spontaneously and directly from the melt. The main crystalline phase consists of a new synthesized chemical of formula Ca2KNa(PO4)2. This compound crystallizes in a very wide range of chemical compositions as shown. Furthermore, the solubility was tested and compared with that of self-prepared alpha-tricalcium phosphate ceramics and commercial products of hydroxyapatite ceramics and surface-modified alpha-tricalcium phosphate ceramics. The results show that new materials containing the compound Ca2KNa(PO4)2 had the highest solubility in comparison with other tested materials.

  14. Hydrogen-Bonded Organic Frameworks (HOFs): A New Class of Porous Crystalline Proton-Conducting Materials.

    Science.gov (United States)

    Karmakar, Avishek; Illathvalappil, Rajith; Anothumakkool, Bihag; Sen, Arunabha; Samanta, Partha; Desai, Aamod V; Kurungot, Sreekumar; Ghosh, Sujit K

    2016-08-26

    Two porous hydrogen-bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra-high proton conduction values (σ) 0.75× 10(-2)  S cm(-1) and 1.8×10(-2)  S cm(-1) under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic-based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen-bonded porous organic frameworks as solid-state proton conducting materials.

  15. Single-crystalline zinc oxide nanowires as photoanode material for dye-sensitized solar cells.

    Science.gov (United States)

    Ho, Shu-Te; Hsiao, Ching-Lun; Lin, Hsin-Yu; Chen, Hsiang-An; Wang, Chiu-Yen; Lin, Heh-Nan

    2010-10-01

    This study reports the use of single-crystalline and well-aligned ZnO nanowires as photoanode material for dye-sensitized solar cells. The ZnO nanowires are grown on fluorine-doped tin oxide coated glass substrates without catalysts by thermal evaporation. In spite of low roughness factors of around 25 for the nanowire photoanodes, the fabricated solar cells yield power conversion efficiencies of around 1.3% under AM 1.5G (100 mW cm-2) illumination. Moreover, fill factors of around 0.5 have been achieved and are relatively high when compared with reported values from ZnO nanowire photoanodes. The results reveal the advantage of using single-crystalline nanowires as photoanode material and provide clues for the advancement of nanowire based dye-sensitized solar cells.

  16. 17th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Workshop Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B. L.

    2007-08-01

    The National Center for Photovoltaics sponsored the 17th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 5-8, 2007. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The theme of this year's meeting was 'Expanding Technology for a Future Powered by Si Photovoltaics.'

  17. Electron localization function in full-potential representation for crystalline materials.

    Science.gov (United States)

    Ormeci, A; Rosner, H; Wagner, F R; Kohout, M; Grin, Yu

    2006-01-26

    The electron localization function (ELF) is implemented in the first-principles, all-electron, full-potential local orbital method. This full-potential implementation increases the accuracy with which the ELF can be computed for crystalline materials. Some representative results obtained are presented and compared with the results of other methods. Although for crystal structures with directed bonding only minor differences are found, in simple elemental metals, there are differences in the valence region, which give rise to different ELF topologies.

  18. Optical waveguide materials, structures, and dispersion modulation

    Science.gov (United States)

    Zhang, Hao; Liu, Jiaming; Lin, Jian; Li, Wenxiu; Xue, Xia; Huang, Anping; Xiao, Zhisong

    2016-11-01

    Optical waveguide is used in most integrated optic devices to confine and guide light in higher refractive index channels. The structures and materials of slot waveguides are reviewed in this paper. Coupled resonator optical waveguides (CROWs) can be used for a rotation sensor with compact size, low power consumption and low cost. The loss determines the ultimate sensitivity of CROW gyros. Resonator-based optical gyroscope's sensitivity for measuring rotation is enhanced via using the anomalous dispersion characteristic of superluminal light propagation, which can be also generated by using passive optical resonators.

  19. Characterization of temperature-dependent optical material properties of polymer powders

    Energy Technology Data Exchange (ETDEWEB)

    Laumer, Tobias [Bayerisches Laserzentrum GmbH, 91052 Erlangen (Germany); SAOT Erlangen Graduate School in Advanced Optical Technologies, 91052 Erlangen (Germany); CRC Collaborative Research Center 814 - Additive Manufacturing, 91052 Erlangen (Germany); Stichel, Thomas; Bock, Thomas; Amend, Philipp [Bayerisches Laserzentrum GmbH, 91052 Erlangen (Germany); CRC Collaborative Research Center 814 - Additive Manufacturing, 91052 Erlangen (Germany); Schmidt, Michael [Bayerisches Laserzentrum GmbH, 91052 Erlangen (Germany); University of Erlangen-Nürnberg, Institute of Photonic Technologies, 91052 Erlangen (Germany); SAOT Erlangen Graduate School in Advanced Optical Technologies, 91052 Erlangen (Germany); CRC Collaborative Research Center 814 - Additive Manufacturing, 91052 Erlangen (Germany)

    2015-05-22

    In former works, the optical material properties of different polymer powders used for Laser Beam Melting (LBM) at room temperature have been analyzed. With a measurement setup using two integration spheres, it was shown that the optical material properties of polymer powders differ significantly due to multiple reflections within the powder compared to solid bodies of the same material. Additionally, the absorption behavior of the single particles shows an important influence on the overall optical material properties, especially the reflectance of the powder bed. Now the setup is modified to allow measurements at higher temperatures. Because crystalline areas of semi-crystalline thermoplastics are mainly responsible for the absorption of the laser radiation, the influence of the temperature increase on the overall optical material properties is analyzed. As material, conventional polyamide 12 and polypropylene as new polymer powder material, is used. By comparing results at room temperature and at higher temperatures towards the melting point, the temperature-dependent optical material properties and their influence on the beam-matter interaction during the process are discussed. It is shown that the phase transition during melting leads to significant changes of the optical material properties of the analyzed powders.

  20. Hybrid sol-gel optical materials

    Science.gov (United States)

    Zeigler, John M.

    1992-01-01

    Hybrid sol-gel materials comprise silicate sols cross-linked with linear polysilane, polygermane, or poly(silane-germane). The sol-gel materials are useful as optical identifiers in tagging and verification applications and, in a different aspect, as stable, visible light transparent non-linear optical materials. Methyl or phenyl silicones, polyaryl sulfides, polyaryl ethers, and rubbery polysilanes may be used in addition to the linear polysilane. The linear polymers cross-link with the sol to form a matrix having high optical transparency, resistance to thermooxidative aging, adherence to a variety of substrates, brittleness, and a resistance to cracking during thermal cycling.

  1. Optical and electrical characterization of crystalline silicon films formed by rapid thermal annealing of amorphous silicon

    Energy Technology Data Exchange (ETDEWEB)

    Baldus-Jeursen, Christopher, E-mail: cjbaldus@uwaterloo.ca; Tarighat, Roohollah Samadzadeh, E-mail: rsamadza@uwaterloo.ca; Sivoththaman, Siva, E-mail: sivoththaman@uwaterloo.ca

    2016-03-31

    The effect of rapid thermal annealing (RTA) on n-type hydrogenated amorphous silicon (a-Si:H) films deposited on single-crystal silicon (c-Si) wafers was studied by electrical and optical methods. Deposition of a-Si:H films by plasma-enhanced chemical vapor deposition (PECVD) was optimized for high deposition rate and maximum film uniformity. RTA processed films were characterized by spreading resistance profiling (SRP), Hall effect, spectroscopic ellipsometry, defect etching, and transmission electron microscopy (TEM). It was found that the films processed between 600 °C and 1000 °C were highly crystalline and that the defect density in the films diminished with increasing thermal budget. Junctions formed by the RTA processed n-type a-Si:H films on p-type c-Si wafers were tested for device applicability. It was established that these films can be used as the emitter layer in n{sup +}p photovoltaic (PV) devices with over 14% conversion efficiency. - Highlights: • Rapid thermal annealing of doped amorphous silicon deposited on single-crystal silicon (c-Si) wafers resulted in highly crystalline films for photovoltaic devices. • As the annealing temperature increased, the electrical and optical properties of the films became increasingly similar to single-crystal silicon. • Annealing temperatures between 500-1000 oC were investigated. Solar cell devices fabricated after annealing at 750 oC were found to be the most suitable compromise between good quality crystalline films and minimal dopant diffusion into the c-Si wafer. • Annealed films were highly conductive without the need for a transparent conducting oxide.

  2. Electronic, magnetic, and optical materials

    CERN Document Server

    Fulay, Pradeep

    2013-01-01

    Technological aspects of ferroelectric, piezoelectric and pyroelectric materials are discussed in detail, in a way that should allow the reader to select an optimal material for a particular application. The basics of magnetostatics are described clearly, as are a wide range of magnetic properties of materials … .-Tony Harker, Department of Physics and Astronomy, University College London

  3. Laser and nonlinear optical materials: SPIE volume 681

    Energy Technology Data Exchange (ETDEWEB)

    De Shazer, L.G.

    1987-01-01

    This book contains papers arranged under the following session headings: Nonlinear optical crystals; Laser host crystals; Electro-optic and magneto-optic materials; and Characterization of optical materials.

  4. Synthesis of rod-like bis-ester liquid crystals and their influence on photoelectric properties of liquid crystalline materials

    Institute of Scientific and Technical Information of China (English)

    Min Yan Zheng; Yong Sheng Wei; Zhong Wei An; Shan Wang

    2009-01-01

    Six novel rod-like magnetic liquid crystals have been prepared,in which trans-bicyclobexyl or trans-cyclobexylphenyl and biphenylcarboxylic acid phenyl ester mesogenic cores with n-propyl and n-pentyl substituents were terminated by 4-hydroxylTEMPO (TEMPO = 2,2,6,6-tetramethylpiperidine-l-oxy).Their structures were confirmed by elemental analysis,IR and MS.Determined by SQUID,EPR,DSC and HS-POM (heat stage polarizing optical microscope),the six compounds all have both magnetic and liquid crystalline properties; their temperature ranges of mesophase were from 16.0 to 24.8 ~C,and the magnetic liquid crystal molecules could obviously improve the response sensitivity of liquid crystal materials.

  5. High-Strain Rate Tensile Behavior of Pure Aluminum Single and Multi-Crystalline Materials with a Tensile Split Hopkinson Bar

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Sangyul [Samsung Electro-Mechanics, Suwon (Korea, Republic of); Jang, Jin Hee; Yoon, Hyo Jun; Kim, Ki Tae [Pohang Univ. of Science and Technology, Pohang (Korea, Republic of)

    2016-01-15

    In this study, we modified the conventional tensile split Hopkinson bar(TSHB) apparatus typically used for the high strength steel to evaluate the tensile deformation behavior of soft metallic sheet materials under high strain rates. Stress-strain curves of high purity single and multi-crystalline materials were obtained using this experimental procedure. Grain morphology and initial crystallographic orientation were characterized by EBSD(Electron Backscattered Diffraction) method measured in a FE-SEM(Field emission-scanning electron microscopy). The fractured surfaces were observed by using optical microscopy. The relationship between plastic deformation of aluminum crystalline materials under high-strain rates and the initial microstructure and the crystallographic orientations has been addressed.

  6. Dissolution chemistry and biocompatibility of single-crystalline silicon nanomembranes and associated materials for transient electronics.

    Science.gov (United States)

    Hwang, Suk-Won; Park, Gayoung; Edwards, Chris; Corbin, Elise A; Kang, Seung-Kyun; Cheng, Huanyu; Song, Jun-Kyul; Kim, Jae-Hwan; Yu, Sooyoun; Ng, Joanne; Lee, Jung Eun; Kim, Jiyoung; Yee, Cassian; Bhaduri, Basanta; Su, Yewang; Omennetto, Fiorenzo G; Huang, Yonggang; Bashir, Rashid; Goddard, Lynford; Popescu, Gabriel; Lee, Kyung-Mi; Rogers, John A

    2014-06-24

    Single-crystalline silicon nanomembranes (Si NMs) represent a critically important class of material for high-performance forms of electronics that are capable of complete, controlled dissolution when immersed in water and/or biofluids, sometimes referred to as a type of "transient" electronics. The results reported here include the kinetics of hydrolysis of Si NMs in biofluids and various aqueous solutions through a range of relevant pH values, ionic concentrations and temperatures, and dependence on dopant types and concentrations. In vitro and in vivo investigations of Si NMs and other transient electronic materials demonstrate biocompatibility and bioresorption, thereby suggesting potential for envisioned applications in active, biodegradable electronic implants.

  7. Development of Organic Nonlinear Optical Materials

    Science.gov (United States)

    1992-10-22

    10 SOVRCE Of FUNO#NG NUM#E*S DM J .j PROGRAM PR0jECT TA5. ~ *0. I1I TITLE &Vila* So.Ivety ClaUMC400NJ Development of Organic NonLinear Optical Materials (U...0102-LF-014-6603 UNCLASSIFIED (U) AFOSR Contract: F4962040-C 0097 FINAL REPORT Development of Organic Nonlinear Optical Materials by J. Sounnk IL

  8. Electronic properties of SnTe-class topological crystalline insulator materials

    Science.gov (United States)

    Wang, Jianfeng; Wang, Na; Huang, Huaqing; Duan, Wenhui

    2016-11-01

    The rise of topological insulators in recent years has broken new ground both in the conceptual cognition of condensed matter physics and the promising revolution of the electronic devices. It also stimulates the explorations of more topological states of matter. Topological crystalline insulator is a new topological phase, which combines the electronic topology and crystal symmetry together. In this article, we review the recent progress in the studies of SnTe-class topological crystalline insulator materials. Starting from the topological identifications in the aspects of the bulk topology, surface states calculations, and experimental observations, we present the electronic properties of topological crystalline insulators under various perturbations, including native defect, chemical doping, strain, and thickness-dependent confinement effects, and then discuss their unique quantum transport properties, such as valley-selective filtering and helicity-resolved functionalities for Dirac fermions. The rich properties and high tunability make SnTe-class materials promising candidates for novel quantum devices. Project supported by the Ministry of Science and Technology of China (Grant No. 2016YFA0301000) and the National Natural Science Foundation of China (Grant No. 11334006).

  9. Hybrid materials for optics and photonics.

    Science.gov (United States)

    Lebeau, Benedicte; Innocenzi, Plinio

    2011-02-01

    The interest in organic-inorganic hybrids as materials for optics and photonics started more than 25 years ago and since then has known a continuous and strong growth. The high versatility of sol-gel processing offers a wide range of possibilities to design tailor-made materials in terms of structure, texture, functionality, properties and shape modelling. From the first hybrid material with optical functional properties that has been obtained by incorporation of an organic dye in a silica matrix, the research in the field has quickly evolved towards more sophisticated systems, such as multifunctional and/or multicomponent materials, nanoscale and self-assembled hybrids and devices for integrated optics. In the present critical review, we have focused our attention on three main research areas: passive and active optical hybrid sol-gel materials, and integrated optics. This is far from exhaustive but enough to give an overview of the huge potential of these materials in photonics and optics (254 references).

  10. First-principles study of crystalline and amorphous AlMgB{sub 14}-based materials

    Energy Technology Data Exchange (ETDEWEB)

    Ivashchenko, V. I.; Shevchenko, V. I., E-mail: shev@materials.kiev.ua [Institute of Problems of Material Science, National Academy of Science of Ukraine, Krzhyzhanosky Str. 3, 03142 Kyiv (Ukraine); Turchi, P. E. A. [Lawrence Livermore National Laboratory (L-352), P.O. Box 808, Livermore, California 94551 (United States); Veprek, S. [Department of Chemistry, Technical University Munich, Lichtenbergstrasse 4, D-85747 Garching (Germany); Leszczynski, Jerzy [Department of Chemistry and Biochemistry, Interdisciplinary Center for Nanotoxicity, Jackson State University, Jackson, Mississippi 39217 (United States); Gorb, Leonid [Department of Chemistry and Biochemistry, Interdisciplinary Center for Nanotoxicity, Jackson State University, Jackson, Mississippi 39217 (United States); Badger Technical Services, LLC, Vicksburg, Mississippi 39180 (United States); Hill, Frances [U.S. Army ERDC, Vicksburg, Mississippi 39180 (United States)

    2016-05-28

    We report first-principles investigations of crystalline and amorphous boron and M1{sub x}M2{sub y}X{sub z}B{sub 14−z} (M1, M2 = Al, Mg, Li, Na, Y; X = Ti, C, Si) phases (so-called “BAM” materials). Phase stability is analyzed in terms of formation energy and dynamical stability. The atomic configurations as well as the electronic and phonon density states of these phases are compared. Amorphous boron consists of distorted icosahedra, icosahedron fragments, and dioctahedra, connected by an amorphous network. The presence of metal atoms in amorphous BAM materials precludes the formation of icosahedra. For all the amorphous structures considered here, the Fermi level is located in the mobility gap independent of the number of valence electrons. The intra-icosahedral vibrations are localized in the range of 800 cm{sup −1}, whereas the inter-icosahedral vibrations appear at higher wavenumbers. The amorphization leads to an enhancement of the vibrations in the range of 1100–1250 cm{sup −1}. The mechanical properties of BAM materials are investigated at equilibrium and under shear and tensile strain. The anisotropy of the ideal shear and tensile strengths is explained in terms of a layered structure of the B{sub 12} units. The strength of amorphous BAM materials is lower than that of the crystalline counterparts because of the partial fragmentation of the boron icosahedra in amorphous structures. The strength enhancement found experimentally for amorphous boron-based films is very likely related to an increase in film density, and the presence of oxygen impurities. For crystalline BAM materials, the icosahedra are preserved during elongation upon tension as well as upon shear in the (010)[100] slip system.

  11. Optical and other material properties of SiO2 from ab initio studies

    Science.gov (United States)

    Warmbier, Robert; Mohammed, Faris; Quandt, Alexander

    2014-07-01

    The optical properties of photonic devices largely depend on the dielectric properties of the underlying materials. We apply modern ab initio methods to study crystalline SiO2 phases, which serve as toy models for amorphous glass. We discuss the dielectric response from the infrared to the VIS/UV, which is crucial for glass based photonic applications. Low density silica, like cristobalite, may provide a good basis for high transmission optical devices.

  12. Optical Evaluation of the Rear Contacts of Crystalline Silicon Solar Cells by Coupled Electromagnetic and Statistical Ray-Optics Modeling

    KAUST Repository

    Dabirian, Ali

    2017-02-15

    High-efficiency crystalline silicon (c-Si) solar cells increasingly feature sophisticated electron and hole contacts aimed at minimizing electronic losses. At the rear of photovoltaic devices, such contacts—usually consisting of stacks of functional layers—offer opportunities to enhance the infrared response of the solar cells. Here, we propose an accurate and simple modeling procedure to evaluate the infrared performance of rear contacts in c-Si solar cells. Our method combines full-wave electromagnetic modeling of the rear contact with a statistical ray optics model to obtain the fraction of optical energy dissipated from the rear contact relative to that absorbed by the Si wafer. Using this technique, we study the impact of the refractive index, extinction coefficient, and thickness of the rear-passivating layer and establish basic design rules. In addition, we evaluate novel optical structures, including stratified thin films, nanoparticle composites, and conductive nanowires embedded in a low-index dielectric matrix, for integration into advanced rear contacts in c-Si photovoltaic devices. From an optical perspective, nanowire structures preserving low contact resistance appear to be the most effective approach to mitigating dissipation losses from the rear contact.

  13. Laser and nonlinear optical materials

    Energy Technology Data Exchange (ETDEWEB)

    De Shazer, L.G.

    1986-01-01

    This book contains 21 papers. Some of the titles are: Frequency conversion materials from a device perspective; Recent developments in area; Recent developments in barium borate; Growth of laser crystals at Airtron; Crystal growth and the future of solid state lasers; Faraday rotator materials for laser systems; and Mechanical properties of single crystal ceramics.

  14. Corning: supplier of multiple optical materials for telescope projects

    Science.gov (United States)

    VanBrocklin, Randy R.; Navan, W. David; Edwards, Mary J.

    2006-06-01

    Corning manufactures several optical materials that can be used as reflective and transmissive optics for telescope optical systems. Corning can manufacture these materials in a large range of sizes and configurations. This paper discusses Corning's portfolio of optical materials and their properties, along with Corning's manufacturing capabilities using these materials. Specific examples of optical blanks that Corning has supplied will be discussed.

  15. Facile synthesis of single-crystalline microwires based on anthracene derivative and their efficient optical waveguides and linearly polarized emission

    Science.gov (United States)

    Peng, Hong-Dan; Wang, Juan-Ye; Liu, Zheng-Hui; Pan, Ge-Bo

    2016-05-01

    The well-defined single-crystalline microwires of a solid-emissive organic functional molecule, 2-(anthracen-9-yl)-4, 5-diphenyl-1H-imidozole (ADPI) were successfully prepared by a facile solution process without the use of surfactant or additional templates. In addition, the optical loss coefficient is as low as 0.1 dB μm-1 for the as-prepared ADPI microwires, which is lower than most previous reported organic optical waveguides. Meanwhile, these microwires also show optically uniaxial properties as demonstrated by the linearly polarized emission, providing potentially orientation-sensitive applications as optical waveguides with low optical loss.

  16. Laser-induced damage in optical materials

    CERN Document Server

    Ristau, Detlev

    2014-01-01

    Dedicated to users and developers of high-powered systems, Laser-Induced Damage in Optical Materials focuses on the research field of laser-induced damage and explores the significant and steady growth of applications for high-power lasers in the academic, industrial, and military arenas. Written by renowned experts in the field, this book concentrates on the major topics of laser-induced damage in optical materials and most specifically addresses research in laser damage that occurs in the bulk and on the surface or the coating of optical components. It considers key issues in the field of hi

  17. DNA as an Optical Material

    Science.gov (United States)

    2011-07-01

    measured luminous efficiency converts to approximately 100 percent internal quantum efficiency. This performance is comparable to the best inorganic...temperature stability, mechani - cal robustness, and a wide HOMO/LUMO energy gap. In addition, preliminary results indicate that OLEDs that incorporate...Nonlinear/ Quantum Optics 35, 165 (2006). >> A.J. Steckl Nature Photonics 1, 3 (2007). >> Y.-W. Kwon et al. J. Mat. Chem. 19, 1353 (2009).

  18. Self-healing Action of Permeable Crystalline Coating on Pores and Cracks in Cement-based Materials

    Institute of Scientific and Technical Information of China (English)

    WANG Guiming; YU Jianying

    2005-01-01

    The self-healing action of a permeable crystalline coating on the porous mortar was investigated by two times impermeability test. Moreover, the self-healing mechanism of cement-based materials with the permeable crystalline coating was studied by SEM. The results indicate that the permeable crystalline coating not only seals the pores and cracks in mortar during its curing process, but also heals the permeable pathway caused by first impermeability test or cracks produced by freeze-thaw cycles. Therefore, cement-based materials can be improved by the permeable crystalline coating for the self-healing function. SEM images prove that the self-healing function is realized by generating a great quantity of non-soluble dendritic crystalline within the pores and cracks, which prevents the penetration of water and other liquids.

  19. Photomobile polymer materials with crosslinked liquid-crystalline structures: molecular design, fabrication, and functions.

    Science.gov (United States)

    Ube, Toru; Ikeda, Tomiki

    2014-09-22

    Crosslinked liquid-crystalline polymer materials that macroscopically deform when irradiated with light have been extensively studied in the past decade because of their potential in various applications, such as microactuators and microfluidic devices. The basic motions of these materials are contraction-expansion and bending-unbending, which are observed mainly in polysiloxanes and polyacrylates that contain photochromic moieties. Other sophisticated motions such as twisting, oscillation, rotation, and translational motion have also been achieved. In recent years, efforts have been made to improve the photoresponsive and mechanical properties of this novel class of materials through the modification of molecular structures, development of new fabrication methods, and construction of composite structures. Herein, we review structures, functions, and working mechanisms of photomobile materials and recent advances in this field.

  20. The impact of powder diffraction on the structural characterization of organic crystalline materials.

    Science.gov (United States)

    Tremayne, Maryjane

    2004-12-15

    The bulk properties of organic crystalline materials depend on their molecular and crystal structures but, as many of these materials cannot be prepared in a suitable form for conventional single-crystal diffraction studies, structural characterization and rationalization of these properties must be obtained from powder diffraction data. The recent development of direct-space structure solution methods has enabled the study of a wide range of organic materials using powder diffraction data, many of structural complexity only made tractable by these advances in methodology. These direct-space methods are based on a number of global optimization techniques including Monte Carlo, simulated annealing, genetic algorithm and differential evolution approaches. In this article, the implementation and relative efficiency and reliability of these methods are discussed, and their impact on the structural study of organic materials is illustrated by examples of polymorphic systems, pharmaceutical, pigment and polypeptide structures and compounds used in the study of intermolecular networks.

  1. Optical properties of low-dimensional materials

    CERN Document Server

    Ogawa, T

    1998-01-01

    This book surveys recent theoretical and experimental studies of optical properties of low-dimensional materials. As an extended version of Optical Properties of Low-Dimensional Materials (Volume 1, published in 1995 by World Scientific), Volume 2 covers a wide range of interesting low-dimensional materials including both inorganic and organic systems, such as disordered polymers, deformable molecular crystals, dilute magnetic semiconductors, SiGe/Si short-period superlattices, GaAs quantum wires, semiconductor microcavities, and photonic crystals. There are excellent review articles by promis

  2. Process induced disorder in crystalline materials: differentiating defective crystals from the amorphous form of griseofulvin.

    Science.gov (United States)

    Feng, Tao; Pinal, Rodolfo; Carvajal, M Teresa

    2008-08-01

    This research investigates milling induced disorder in crystalline griseofulvin. Griseofulvin was subjected to cryogenic milling for various lengths of time. For comparison, the amorphous form of griseofulvin was also prepared by the quench melt method. Different analytical techniques were used to study the differences between the cryomilled, amorphous and crystalline forms of the drug. Cryogenic milling of griseofulvin progressively reduces the crystallinity of the drug by inducing crystal defects, rather than amorphous materials. Raman analysis provides evidence of structural differences between the two. The differences between the defective crystals produced by milling and the amorphous form are significant enough as to be measurable in their bulk thermal properties. Defective crystals show significant decrease in the heat of fusion as a function of milling time but do not exhibit a glass transition nor recrystallization from the amorphous form. Crystal defects undergo recrystallization upon heating at temperatures well below the glass transition temperature (T(g)) in a process that is separate and completely independent from the crystallization of the amorphous griseofulvin, observed above T(g). Physical mixtures of defective crystals and amorphous drug demonstrate that the thermal events associated with each form persist in the mixtures, unaffected by the presence of the other form.

  3. Tracing the origins of transient overshoots for binary mixture diffusion in microporous crystalline materials.

    Science.gov (United States)

    Krishna, Rajamani

    2016-06-21

    Separation of mixtures using microporous crystalline materials is normally achieved by exploiting differences in the adsorption strengths of the constituent species. The focus of the current investigation is on diffusion-selective separations that exploit differences in intra-crystalline diffusivities of guest molecules. A number of experimental investigations report overshoots in intra-crystalline loadings of the more mobile species during transient mixture uptake. Analogous overshoots in fluxes occur for mixture permeation across thin microporous membrane layers. The attainment of supra-equilibrium loadings is a common characteristic of diffusion-selective separations; this allows the over-riding of adsorption selectivities. The primary objective of the current investigation is to demonstrate that the Maxwell-Stefan diffusion formulation, using chemical potential gradients as driving forces, is capable of providing a quantitative description of the temporal and spatial overshoots found in diverse experimental studies. The origins of the overshoots can be traced to thermodynamic coupling effects that emanate from sizable off-diagonal contributions of the matrix of thermodynamic correction factors. If thermodynamic coupling effects are neglected, the overshoots are not realized. It is also demonstrated that while the transport of the more mobile partner is uphill of its loading gradient, its transport is downhill the gradient of its chemical potential. The deliberate exploitation of uphill diffusion to achieve difficult separations is highlighted.

  4. Picosecond laser ablation of poly-L-lactide: Effect of crystallinity on the material response

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, Rocio; Quintana, Iban; Etxarri, Jon [Manufacturing Processes Department, Fundacion TEKNIKER, Av. Otaola 20, 20600, Eibar, Guipuzcoa (Spain); Lejardi, Ainhoa; Sarasua, Jose-Ramon [Department of Mining and Metallurgy Engineering and Materials Science, School of Engineering, University of the Basque Country (EHU-UPV), Alameda de Urquijo s/n, 48013 Bilbao (Spain)

    2011-11-01

    The picosecond laser ablation of poly-L-lactide (PLLA) as a function of laser fluence and degree of crystallinity was examined. The ablation parameters and the surface modifications were analyzed under various irradiation conditions using laser wavelengths ranging from the ultraviolet through the visible. When processing the amorphous PLLA, both energy threshold and topography varied considerably depending on laser wavelength. Laser irradiation showed a reduction in the energy ablation threshold as the degree of crystallinity increased, probably related to photomechanical effects involved in laser ablation with ultra-short pulses and the lower stress accommodation behavior of semicrystalline polymers. In particular, cooperative chain motions are impeded by the higher degree of crystallinity, showing fragile mechanical behavior and lower energy dissipation. The experimental results on ablation rate versus laser energy showed that UV laser ablation on semicrystalline PLLA was more efficient than the visible ablation, i.e., it exhibits higher etch rates over a wide range of pulse energy conditions. These results were interpreted in terms of photo-thermal and photo-chemical response of polymers as a function of material micro-structure and incident laser wavelength. High quality micro-grooves were produced in amorphous PLLA, reveling the potential of ultra-fast laser processing technique in the field of micro-structuring biocompatible and biodegradable polymers for biomedical applications.

  5. Infrared Spectra and Optical Constants of Astronomical Ices: I. Amorphous and Crystalline Acetylene

    Science.gov (United States)

    Hudson, R. L.; Ferrante, R. F.; Moore, M. H.

    2013-01-01

    Here we report recent measurements on acetylene (C2H2) ices at temperatures applicable to the outer Solar System and the interstellar medium. New near- and mid-infrared data, including optical constants (n, k), absorption coefficients (alpha), and absolute band strengths (A), are presented for both amorphous and crystalline phases of C2H2 that exist below 70 K. Comparisons are made to earlier work. Electronic versions of the data are made available, as is a computer routine to use our reported n and k values to simulate the observed IR spectra. Suggestions are given for the use of the data and a comparison to a spectrum of Makemake is made.

  6. Synthesis and Characterization of Storage Energy Materials Prepared from Nano-crystalline Cellulose/Polyethylene Glycol

    Institute of Scientific and Technical Information of China (English)

    Xiao Ping YUAN; En Yong DING

    2006-01-01

    This paper gives a brief report of the synthesis of a new kind of solid-solid phase change materials (SSPCMs), nano-crystalline cellulose/polyethylene glycol (NCC/PEG). These PCMs have very high ability for energy storage, and their enthalpies reach 103.8 J/g. They are composed of two parts, PEG as functional branches for energy storage, and NCC as skeleton. The flexible polymer PEG was grafted onto the surface of rigid powder of NCC by covalent bonds. The results of DSC, FT-IR were briefly introduced, and some comments were also given.

  7. Optical modulators with 2D layered materials

    Science.gov (United States)

    Sun, Zhipei; Martinez, Amos; Wang, Feng

    2016-04-01

    Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that 2D layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this Review, we cover the state of the art of optical modulators based on 2D materials, including graphene, transition metal dichalcogenides and black phosphorus. We discuss recent advances employing hybrid structures, such as 2D heterostructures, plasmonic structures, and silicon and fibre integrated structures. We also take a look at the future perspectives and discuss the potential of yet relatively unexplored mechanisms, such as magneto-optic and acousto-optic modulation.

  8. Nonlinear Optical Materials for the Smart Filtering of Optical Radiation.

    Science.gov (United States)

    Dini, Danilo; Calvete, Mário J F; Hanack, Michael

    2016-11-23

    The control of luminous radiation has extremely important implications for modern and future technologies as well as in medicine. In this Review, we detail chemical structures and their relevant photophysical features for various groups of materials, including organic dyes such as metalloporphyrins and metallophthalocyanines (and derivatives), other common organic materials, mixed metal complexes and clusters, fullerenes, dendrimeric nanocomposites, polymeric materials (organic and/or inorganic), inorganic semiconductors, and other nanoscopic materials, utilized or potentially useful for the realization of devices able to filter in a smart way an external radiation. The concept of smart is referred to the characteristic of those materials that are capable to filter the radiation in a dynamic way without the need of an ancillary system for the activation of the required transmission change. In particular, this Review gives emphasis to the nonlinear optical properties of photoactive materials for the function of optical power limiting. All known mechanisms of optical limiting have been analyzed and discussed for the different types of materials.

  9. Determination of crystallinity of ceramic materials from the Ruland Method; Determinacao da cristalinidade de materiais ceramicos atraves do metodo de Ruland

    Energy Technology Data Exchange (ETDEWEB)

    Kniess, C.T. [Universidade Nove de Julho (UNINOVE), SP (Brazil); Prates, P.B.; Gomes Junior, J.C.; Lima, J.C. de; Riella, H.G.; Kuhnen, N.C., E-mail: kniesscl@gmail.com, E-mail: patybp@gmail.com [Universidade Federal de Santa Catarina (UFSC), SC (Brazil)

    2011-07-01

    Some methods found in literature approach the different characteristics between crystalline and amorphous phases by X ray diffraction technique. These methods use the relation between the intensities of the crystalline peaks and background amorphous or the absolute intensity of one of these to determine the relative amount of crystalline and amorphous material. However, a crystalline substance presents shows coherent diffuse scattering and a loss in the intensity of the peaks of diffraction in function of thermal vibrations of atoms and imperfections in the crystalline structure. A correct method for the determination of the crystallinity must take in account these effects. This work has as objective to determine the crystallinity of ceramic materials obtained with the addition of mineral coal bottom ashes, using the X ray diffraction technique and the Ruland Method, that considers the diminution of the intensity of the crystalline peak because of the disorder affects. The Ruland Method shows adequate for the determination of the crystallinity of the ceramic materials. (author)

  10. Materials for Nonlinear Optics Chemical Perspectives

    Science.gov (United States)

    1991-01-01

    introduced into LB muldilayers built from 1/1 mixtures with an amphiphilic cyclodextrin . The polyenic chains are again perpendicular to the substrate...molecules in inorganic matrices. The encapsulated molecules can be used to induce new optical properties in the material or to probe the changes at the...glass are discussed here. First, laser dyes including rhodamines and coumarins are encapsulated . The resulting doped gel-glasses exhibit optical gain

  11. Materials Development for Next Generation Optical Fiber

    Science.gov (United States)

    Ballato, John; Dragic, Peter

    2014-01-01

    Optical fibers, the enablers of the Internet, are being used in an ever more diverse array of applications. Many of the rapidly growing deployments of fibers are in high-power and, particularly, high power-per-unit-bandwidth systems where well-known optical nonlinearities have historically not been especially consequential in limiting overall performance. Today, however, nominally weak effects, most notably stimulated Brillouin scattering (SBS) and stimulated Raman scattering (SRS) are among the principal phenomena restricting continued scaling to higher optical power levels. In order to address these limitations, the optical fiber community has focused dominantly on geometry-related solutions such as large mode area (LMA) designs. Since such scattering, and all other linear and nonlinear optical phenomena including higher order mode instability (HOMI), are fundamentally materials-based in origin, this paper unapologetically advocates material solutions to present and future performance limitations. As such, this paper represents a ‘call to arms’ for material scientists and engineers to engage in this opportunity to drive the future development of optical fibers that address many of the grand engineering challenges of our day. PMID:28788683

  12. Mid-Infrared ultra-high-Q resonators based on fluoride crystalline materials

    CERN Document Server

    Lecaplain, C; Gorodetsky, M L; Kippenberg, T J

    2016-01-01

    Decades ago, the losses of glasses in the near infrared (near-IR) were investigated in views of developments for optical telecommunications. Today, properties in the mid-infrared (mid-IR) are of interest for molecular spectroscopy applications. In particular, high-sensitivity spectroscopic techniques based on high-finesse mid-IR cavities hold high promise for medical applications. Due to exceptional purity and low losses, whispering gallery mode microresonators based on polished alkaline earth metal fluoride crystals (i.e the $\\mathrm{XF_2}$ family, where X $=$ Ca, Mg, Ba, Sr,...) have attained ultra-high quality (Q) factor resonances (Q$>$10$^{8}$) in the near-IR and visible spectral ranges. Here we report for the first time ultra-high Q factors in the mid-IR using crystalline microresonators. Using an uncoated chalcogenide (ChG) tapered fiber, light from a continuous wave quantum cascade laser (QCL) is efficiently coupled to several crystalline microresonators at 4.4 $\\mu$m wavelength. We measure the optica...

  13. 10,000 optical write, read, and erase cycles in an azobenzene sidechain liquid-crystalline polyester

    DEFF Research Database (Denmark)

    Holme, NCR; Ramanujam, P.S.; Hvilsted, Søren

    1996-01-01

    We show far what is believed to he the first time that it is possible tu generate 10,000 rapid write, read, and erase cycles optically in an azobenzene sidechain liquid-crystalline polyester. We do this by exposing the film alternately to visible light from an argon laser at 488 nm and ultraviolet...

  14. Impurity induced crystallinity and optical emissions in ZnO nanorod arrays

    Science.gov (United States)

    Panda, N. R.; Acharya, B. S.

    2015-01-01

    We report the growth of ZnO nanocrystallites doped with impurities such as B, N and S by green chemistry route using ultrasound. The effect of intrinsic defects and impurity doping on the structural and optical properties of ZnO nanostructures has been studied and discussed. Characterization studies carried out using x-ray diffraction (XRD) reveal the change in lattice parameters and crystallinity of ZnO in the presence of dopant. This has been explained on the basis of the dopant substitution at regular anion and interstitial sites. Study on surface morphology by field emission scanning electron microscopy (FESEM) shows a change from particle-like structure to aligned nanorods nucleated at definite sites. Elemental analysis such as x-ray photon electron spectroscopy (XPS) has been carried out to ascertain the dopant configuration in ZnO. This has been corroborated by the results obtained from FTIR and Raman studies. UV-vis light absorption and PL studies show an expansion of the band gap which has been explained on the basis of Moss-Burstein shift in the electronic band gap of ZnO by impurity incorporation. The optical emissions corresponding to excitonic transition and defect centres present in the band gap of ZnO is found to shift towards lower/higher wavelength sides. New PL bands observed have been assigned to the transitions related to the impurity states present in the band gap of ZnO along with intrinsic defects.

  15. Optical properties and surface damage studies of crystalline silicon caused by swift iron ions

    Energy Technology Data Exchange (ETDEWEB)

    Dubey, S.K., E-mail: skdubey@physics.mu.ac.in

    2016-05-15

    p-Type silicon samples irradiated with 70 MeV {sup 56}Fe{sup 5+} ions for various fluences varying between 5 × 10{sup 12} and 4 × 10{sup 14} ions cm{sup −2} have been studied using spectroscopic ellipsometry and Fourier transform infrared spectroscopy. The microstructure of the irradiated samples was modeled from ellipsometric data, using a multilayer optical model and Bruggeman effective medium approximation. The values of pseudodielectric function, absorption coefficient and Penn gap energy were determined with respect to ion fluence. The effective medium analysis suggests that the superficial silicon layer can be explained as a mixture of crystalline and damaged silicon. The thickness of the damaged layer and percentage of voids present in the layer were found to increase with increase in the ion fluence. The effect of disorder on the interband optical spectra, especially on the critical point E{sub 1} at 3.4 eV was found to vary with ion fluence. A red shift in the critical point E{sub 1} with increasing ion fluence was observed. FTIR study showed of silicon samples irradiated with 70 MeV {sup 56}Fe{sup 5+} ions produced the oscillations in the spectral region 1000–400 cm{sup −1}. As irradiated sample showed more pronounced fringes, while contrast of the fringes and amplitude both were found to decrease with increase in depth.

  16. Optical properties of photochromic and thermochromic materials

    Science.gov (United States)

    Mo, Yeon-Gon

    The optical properties of some thin film materials can be altered by an external stimulus. Photochromic and thermochromic materials, including inorganic and organic substances, have optical properties that can be changed in a reversible manner by irradiation and temperature respectively. These materials can be used in applications such as radiation or thermal sensors, information storage devices and smart window applications in buildings and cars. In this work, major effort was concentrated on passive thermal control coatings based on photochromic and thermochromic materials. The inorganic photochromic materials were based on tungsten and molybdenum oxide films and the organic photochromic materials included spiropyrans and spirooxazines. In addition, photochromic composite organic-inorganic films and thermochromic vanadium oxide films were prepared. The samples were synthesized using sputtering, sol-gel process, and thermal oxidation. The optical properties were investigated for the first time by ultraviolet/visible/infrared (UV/VIS/IR) spectroscopic ellipsometry, attenuated total reflection (ATR) infrared ellipsometry, spectrophotometry, and X-ray diffraction (XRD). For amorphous oxide films, the oxygen deficiency was important in determining the photochromic properties of the films. In the mid-infrared region, no photochromism was observed for the films. The optical properties of organic-inorganic composite films changed in the VIS/NIR wavelength region markedly in a reversible process, with UV irradiation. The composite films containing tungsten heteropolyoxometalate (HPOM) showed faster coloration and bleaching than pure tungsten oxide films. The composite films with molybdenum HPOM showed faster coloration and much slower bleaching than tungsten HPOM. The spiropyran and spirooxazine doped polymeric films were investigated for the first time using infrared and ATR ellipsometry. The infrared optical functions obtained by ATR measurements were a little smaller

  17. An ultra-tunable platform for molecular engineering of high-performance crystalline porous materials

    Science.gov (United States)

    Zhai, Quan-Guo; Bu, Xianhui; Mao, Chengyu; Zhao, Xiang; Daemen, Luke; Cheng, Yongqiang; Ramirez-Cuesta, Anibal J.; Feng, Pingyun

    2016-12-01

    Metal-organic frameworks are a class of crystalline porous materials with potential applications in catalysis, gas separation and storage, and so on. Of great importance is the development of innovative synthetic strategies to optimize porosity, composition and functionality to target specific applications. Here we show a platform for the development of metal-organic materials and control of their gas sorption properties. This platform can accommodate a large variety of organic ligands and homo- or hetero-metallic clusters, which allows for extraordinary tunability in gas sorption properties. Even without any strong binding sites, most members of this platform exhibit high gas uptake capacity. The high capacity is accomplished with an isosteric heat of adsorption as low as 20 kJ mol-1 for carbon dioxide, which could bring a distinct economic advantage because of the significantly reduced energy consumption for activation and regeneration of adsorbents.

  18. Development of ultrafine and pure amorphous and crystalline new materials and their fabrication process

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Myung Seung; Kim, Y. E.; Kim, J. G.; Gu, J. H. [Korea Atomic Energy Research Inst., Taejon (Korea, Republic of); Yoon, N. K.; Seong, S. Y. [Myongseong Ceramics Co., Taejon (Korea, Republic of); Ryu, S. E. [Paichai Univ., Taejon (Korea, Republic of); Lee, J. C. [Myongji Univ., Taejon (Korea, Republic of)

    1996-07-01

    Based on an estimation of annual rice production of 5.2 Million tons, rice husks by-production reaches to 1.17 Million tons per year in Korea. distinguished to other corns, rice contains a lot of Si; 10 {approx} 20 % by weight in rice husks calculated as silica. The aim of this research project is to develop technologies for ceramic powders and materials utilizing the silica in rice husks called phytoliths. In this researches of the following subjects were performed; decomposition of the organic components, acid treatments, extraction of the organic matter, effect of gamma-ray irradiation on the acid treatment, plasma treatment, crystallization of silica powder, dispersion of amorphous silica powder, fabrication of ultrafine crystalline fibrous materials.. (author). 18 refs., 5 tabs., 55 figs.

  19. Optical substrate materials for synchrotron radiation beamlines

    Energy Technology Data Exchange (ETDEWEB)

    Howells, M.R. [Lawrence Berkeley National Lab., CA (United States). Advanced Light Source; Paquin, R.A. [Univ. of Arizona, Tucson, AZ (United States). Optical Sciences Center

    1997-06-01

    The authors consider the materials choices available for making optical substrates for synchrotron radiation beam lines. They find that currently the optical surfaces can only be polished to the required finish in fused silica and other glasses, silicon, CVD silicon carbide, electroless nickel and 17-4 PH stainless steel. Substrates must therefore be made of one of these materials or of a metal that can be coated with electroless nickel. In the context of material choices for mirrors they explore the issues of dimensional stability, polishing, bending, cooling, and manufacturing strategy. They conclude that metals are best from an engineering and cost standpoint while the ceramics are best from a polishing standpoint. They then give discussions of specific materials as follows: silicon carbide, silicon, electroless nickel, Glidcop{trademark}, aluminum, precipitation-hardening stainless steel, mild steel, invar and superinvar. Finally they summarize conclusions and propose ideas for further research.

  20. Spectral dependence of the refractive index of single-crystalline GaAs for optical applications

    Energy Technology Data Exchange (ETDEWEB)

    Plotnichenko, V G; Nazaryants, V O; Kryukova, E B; Dianov, E M, E-mail: victor@fo.gpi.ac.r [Fibre Optics Research Center of the Russian Academy of Sciences, 38 Vavilov Street, Moscow 119333 (Russian Federation)

    2010-03-17

    The refractive index of crystalline GaAs is measured by the method of interference refractometry in the wavenumber range from 10 500 to 540 cm{sup -1} (or the wavelength range from 0.9 to 18.6 {mu}m) with a resolution of 0.1 cm{sup -1}. The measurement results are approximated by the generalized Cauchy dispersion formula of the 8th power. Spectral wavelength dependences of the first- and second-order derivatives of the refractive index are calculated, and the zero material dispersion wavelength is found to be {lambda}{sub 0} = 6.61 {mu}m. Using three GaAs plates of different thicknesses we managed to raise the refractive index measurement accuracy up to 4 x 10{sup -4} or 0.02%, being nearly by an order of magnitude better than the data available.

  1. Generalization of the adsorption process in crystalline porous materials and its application to Metal-Organic Frameworks (MOFs)

    OpenAIRE

    Aduenko, Alexander A.; Murray, Andy; Mendoza-Cortes, Jose L.

    2014-01-01

    In this paper we present an approach for the generalization of adsorption of light gases in crystalline porous materials. Our approach allows the determination of gas uptake considering only geometrical constrains of the porous framework and interaction energy of the guest molecule with the framework. The derivation of this general equation for the uptake of any crystalline porous framework is presented. Based on this theory, we calculated optimal values for the adsorption enthalpy at differe...

  2. Advanced materials for integrated optical waveguides

    CERN Document Server

    Tong Ph D, Xingcun Colin

    2014-01-01

    This book provides a comprehensive introduction to integrated optical waveguides for information technology and data communications. Integrated coverage ranges from advanced materials, fabrication, and characterization techniques to guidelines for design and simulation. A concluding chapter offers perspectives on likely future trends and challenges. The dramatic scaling down of feature sizes has driven exponential improvements in semiconductor productivity and performance in the past several decades. However, with the potential of gigascale integration, size reduction is approaching a physical limitation due to the negative impact on resistance and inductance of metal interconnects with current copper-trace based technology. Integrated optics provides a potentially lower-cost, higher performance alternative to electronics in optical communication systems. Optical interconnects, in which light can be generated, guided, modulated, amplified, and detected, can provide greater bandwidth, lower power consumption, ...

  3. Graphene - a rather ordinary nonlinear optical material

    CERN Document Server

    khurgin, Jacob B

    2014-01-01

    An analytical expression for the nonlinear refractive index of graphene has been derived and used to obtain the performance metrics of third order nonlinear devices using graphene as a nonlinear medium. None of the metrics is found to be superior to the existing nonlinear optical materials.

  4. Thermodynamics of water-solid interactions in crystalline and amorphous pharmaceutical materials.

    Science.gov (United States)

    Sacchetti, Mark

    2014-09-01

    Pharmaceutical materials, crystalline and amorphous, sorb water from the atmosphere, which affects critical factors in the development of drugs, such as the selection of drug substance crystal form, compatibility with excipients, dosage form selection, packaging, and product shelf-life. It is common practice to quantify the amount of water that a material sorbs at a given relative humidity (RH), but the results alone provide minimal to no physicochemical insight into water-solid interactions, without which pharmaceutical scientists cannot develop an understanding of their materials, so as to anticipate and circumvent potential problems. This research was conducted to advance the science of pharmaceutical materials by examining the thermodynamics of solids with sorbed water. The compounds studied include nonhygroscopic drugs, a channel hydrate drug, a stoichiometric hydrate excipient, and an amorphous excipient. The water sorption isotherms were measured over a range of temperature to extract the partial molar enthalpy and entropy of sorbed water as well as the same quantities for some of the solids. It was found that water-solid interactions spanned a range of energy and entropy as a function of RH, which was unique to the solid, and which could be valuable in identifying batch-to-batch differences and effects of processing in material performance.

  5. Intrinsic optical bistability between left-handed material and nonlinear optical materials

    Institute of Scientific and Technical Information of China (English)

    Shi Hong-Yan; Jiang Yong-Yuan; Sun Xiu-Dong; Guo Ru-Hai; Zhao Yi-Ping

    2005-01-01

    The electromagnetic properties of the interface between a left-handed material and a conventional nonlinear material were investigated theoretically and numerically. We found a new phenomenon-optical bistability of the interface.It was shown that the incident intensity, incident angle and permeability ratio between the left-handed and the nonlinear materials could dramatically affect the optical bistable behaviour. We also compared the bistable behaviours of different electromagnetic modes. The results indicated that the TE mode was prior to the TM mode to obtain optical bistability for the same parameter.

  6. Stardust Interstellar Preliminary Examination VIII: Identification of crystalline material in two interstellar candidates

    Science.gov (United States)

    Gainsforth, Zack; Brenker, Frank E.; Simionovici, Alexandre S.; Schmitz, Sylvia; Burghammer, Manfred; Butterworth, Anna L.; Cloetens, Peter; Lemelle, Laurence; Tresserras, Juan-Angel Sans; Schoonjans, Tom; Silversmit, Geert; Solé, Vicente A.; Vekemans, Bart; Vincze, Laszlo; Westphal, Andrew J.; Allen, Carlton; Anderson, David; Ansari, Asna; Bajt, SašA.; Bastien, Ron K.; Bassim, Nabil; Bechtel, Hans A.; Borg, Janet; Bridges, John; Brownlee, Donald E.; Burchell, Mark; Changela, Hitesh; Davis, Andrew M.; Doll, Ryan; Floss, Christine; Flynn, George; Fougeray, Patrick; Frank, David; Grün, Eberhard; Heck, Philipp R.; Hillier, Jon K.; Hoppe, Peter; Hudson, Bruce; Huth, Joachim; Hvide, Brit; Kearsley, Anton; King, Ashley J.; Lai, Barry; Leitner, Jan; Leroux, Hugues; Leonard, Ariel; Lettieri, Robert; Marchant, William; Nittler, Larry R.; Ogliore, Ryan; Ong, Wei Ja; Postberg, Frank; Price, Mark C.; Sandford, Scott A.; Srama, Ralf; Stephan, Thomas; Sterken, Veerle; Stodolna, Julien; Stroud, Rhonda M.; Sutton, Steven; Trieloff, Mario; Tsou, Peter; Tsuchiyama, Akira; Tyliszczak, Tolek; von Korff, Joshua; Zevin, Daniel; Zolensky, Michael E.

    2014-09-01

    Using synchrotron-based X-ray diffraction measurements, we identified crystalline material in two particles of extraterrestrial origin extracted from the Stardust Interstellar Dust Collector. The first particle, I1047,1,34 (Hylabrook), consisted of a mosaiced olivine grain approximately 1 µm in size with internal strain fields up to 0.3%. The unit cell dimensions were a = 4.85 ± 0.08 Å, b = 10.34 ± 0.16 Å, c = 6.08 ± 0.13 Å (2σ). The second particle, I1043,1,30 (Orion), contained an olivine grain ≈ 2 µm in length and >500 nm in width. It was polycrystalline with both mosaiced domains varying over ≈ 20° and additional unoriented domains, and contained internal strain fields Fo65 (2σ). Orion also contained abundant spinel nanocrystals of unknown composition, but unit cell dimension a = 8.06 ± 0.08 Å (2σ). Two additional crystalline phases were present and remained unidentified. An amorphous component appeared to be present in both these particles based on STXM and XRF results reported elsewhere.

  7. Laser induced damage in optical materials: 1989

    Science.gov (United States)

    Bennett, H. E.; Chase, L. L.; Guenther, A. H.; Newnam, B. E.; Soileau, M. J.

    1990-10-01

    The 21st Annual Symposium on Optical Materials for High Power Lasers was divided into sessions concerning Materials and Measurements, Mirrors and Surfaces, Thin Films, and, finally, Fundamental Mechanisms. As in previous years, the emphasis of the papers presented was directed toward new frontiers and new developments. Particular emphasis was given to materials for high power apparatus. The wavelength range of the prime interest included surface characterization, thin film substrate boundaries, and advances in fundamental laser matter threshold interactions and mechanisms. The scalling of damage thresholds with pulse duration, focal area, and wavelength was discussed in detail.

  8. Ultrafast broadband tuning of resonant optical nanostructures using phase change materials

    CERN Document Server

    Rudé, Miquel; Cetin, Arif E; Miller, Timothy A; Carrilero, Albert; Wall, Simon; de Abajo, F Javier García; Altug, Hatice; Pruneri, Valerio

    2015-01-01

    The phenomenon of extraordinary optical transmission {EOT} through arrays of nanoholes patterned in a metallic film has emerged as a promising tool for a wide range of applications, including photovoltaics, nonlinear optics, and sensing. Designs and methods enabling the dynamic tuning of the optical resonances of these structures are essential to build efficient optical devices, including modulators, switches, filters, and biosensors. However, the efficient combination of EOT and dynamic tuning remains a challenge, mainly because of the lack of materials that can induce modulation over a broad spectral range at high speeds. Here, we demonstrate tuneable resonance wavelength shifts as large as 385 nm - an order of magnitude higher than previously reported - through the combination of phase change materials {PCMs}, which exhibit dramatic variations in optical properties upon transitions between amorphous and crystalline phases, with properly designed subwavelength nanohole metallic arrays. We further find throu...

  9. Diamond as a material for monolithically integrated optical and optomechanical devices

    CERN Document Server

    Rath, Patrik; Nebel, Christoph; Pernice, Wolfram H P

    2016-01-01

    Diamond provides superior optical and mechanical material properties, making it a prime candidate for the realization of integrated optomechanical circuits. Because diamond sub- strates have matured in size, efficient nanostructuring methods can be used to realize full-scale integrated devices. Here we review optical and mechanical resonators fab- ricated from polycrystalline as well as single crystalline diamond. We present relevant material properties with respect to implementing optomechanical devices and compare them with other material systems. We give an overview of diamond integrated optomechanical circuits and present the optical readout mechanism and the actuation via optical or electrostatic forces that have been implemented to date. By combining diamond nanophotonic circuits with superconducting nanowires single photons can be efficiently detected on such chips and we outline how future single photon optomechanical circuits can be realized on this platform.

  10. Large area stress distribution in crystalline materials calculated from lattice deformation identified by electron backscatter diffraction.

    Science.gov (United States)

    Shao, Yongliang; Zhang, Lei; Hao, Xiaopeng; Wu, Yongzhong; Dai, Yuanbin; Tian, Yuan; Huo, Qin

    2014-08-05

    We report a method to obtain the stress of crystalline materials directly from lattice deformation by Hooke's law. The lattice deformation was calculated using the crystallographic orientations obtained from electron backscatter diffraction (EBSD) technology. The stress distribution over a large area was obtained efficiently and accurately using this method. Wurtzite structure gallium nitride (GaN) crystal was used as the example of a hexagonal crystal system. With this method, the stress distribution of a GaN crystal was obtained. Raman spectroscopy was used to verify the stress distribution. The cause of the stress distribution found in the GaN crystal was discussed from theoretical analysis and EBSD data. Other properties related to lattice deformation, such as piezoelectricity, can also be analyzed by this novel approach based on EBSD data.

  11. Synthesis of Nano-Crystalline Materials in Open-Air Laboratory: A Case Study of Tobacco.

    Science.gov (United States)

    Satpati, Biswarup; Bhattacherjee, Ashis; Roy, Madhusudan

    2015-02-01

    The work deals with synthesis of nano-crystalline materials in open-air laboratory and in-depth investigation of the tobacco sample of one branded cigarette and its ash using high-resolution transmission electron microscopy and associated techniques. It exhibits the presence of nanocrystals and nanorods of various oxides in cigarette ash. The structure, shape, size and composition of these nanocrystals and nanorods are explored. The energy dispersive X-ray spectra from different regions of the tobacco sample and its ash using high-angle annular dark field scanning/transmission electron microscopy mode are utilized to obtain elemental composition and their relative abundances. For a detailed distribution of different elements in the nanorods, elemental mapping using energy-filtered transmission electron microscopy is also presented. The results highlight the conversion of amorphous constituents of tobacco to nanomaterials on combustion at low temperatures, thus mixing up in the atmosphere.

  12. Simulation of indentation fracture in crystalline materials using mesoscale self-assembly.

    Science.gov (United States)

    Thalladi, Venkat R; Schwartz, Alexander; Phend, Jennifer N; Hutchinson, John W; Whitesides, George M

    2002-08-21

    A new physical model based on mesoscale self-assembly is developed to simulate indentation fracture in crystalline materials. Millimeter-scale hexagonal objects exhibiting atom-like potential functions were designed and allowed to self-assemble into two-dimensional (2D) aggregates at the interface between water and perfluorodecalin. Indentation experiments were performed on these aggregates, and the stresses and strains involved in these processes were evaluated. The stress field in the aggregates was analyzed theoretically using the 2D elastic Hertz solution. Comparison of the experimental results with theoretical analysis revealed that fracture develops in regions subjected to high shear stress and some, albeit low, tensile stress. The potential for the broader application of the model is illustrated using indentation of assemblies with point defects and adatoms introduced at predetermined locations, and using a two-phase aggregate simulating a compliant film on a stiff substrate.

  13. A dynamic atomistic-continuum method for the simulation of crystalline materials

    CERN Document Server

    Huang Zhon Gy

    2002-01-01

    We present a coupled atomistic-continuum method for the modeling of defects and interface dynamics in crystalline materials. The method uses atomistic models such as molecular dynamics near defects and interfaces, and continuum models away from defects and interfaces. We propose a new class of matching conditions between the atomistic and the continuum regions. These conditions ensure the accurate passage of large-scale information between the atomistic and the continuum regions and at the same time minimize the reflection of phonons at the atomistic-continuum interface. They can be made adaptive by choosing appropriate weight functions. We present applications to dislocation dynamics, friction between two-dimensional crystal surfaces, and fracture dynamics. We compare results of the coupled method and of the detailed atomistic model.

  14. Refractive Index Measurement of the Isolated Crystalline Lens Using Optical Coherence Tomography

    Science.gov (United States)

    Uhlhorn, Stephen R.; Borja, David; Manns, Fabrice; Parel, Jean-Marie

    2008-01-01

    An optical coherence tomography system has been developed that was designed specifically for imaging the isolated crystalline lens. Cross-sectional OCT images were recorded on 40 lenses from 32 human donors with an age range of 6 – 82 years. A method has been developed to measure the axial thickness and average refractive index of the lens from a single recorded image. The measured average group refractive index at the measurement wavelength of 825 nm was converted to the average phase refractive index at 589 nm using lens dispersion data from the literature. The average refractive index for all lenses measured was 1.408 ± 0.005 which agrees well with recent MRI measurements of the lens index gradient. A linear regression of the data resulted in a statistically significant decrease in the average refractive index with age, but a simple linear model was insufficient to explain the age dependence. The results presented here suggest that the peak refractive index in the nucleus is closer to 1.420, rather than the previously accepted value of 1.406. PMID:18824191

  15. Suspension and optical properties of the crystalline lens in the eyes of basal vertebrates.

    Science.gov (United States)

    Kröger, Ronald H H; Gustafsson, Ola S E; Tuminaite, Inga

    2014-06-01

    We have investigated the apparatus suspending the crystalline lens in the eyes of basal vertebrates. Data are presented for Holocephali (Chondrichthyes) and the actinopterygians Polypteriformes, Polyodontidae (Acipenseriformes), Lepisosteiformes, Amiiformes, and one teleost species, the banded archerfish (Toxotes jaculatrix). We also studied the optical properties of the lens in Polypteriformes, Lepisosteiformes, and the archerfish. Together with previously published results, our findings show that there are three basic types of lens suspension in vertebrates. These are i) a rotationally symmetric suspension (Petromyzontida, lampreys; Ceratodontiformes, lungfishes; Tetrapoda), ii) a suspension with a dorso-ventral axis of symmetry and a ventral papilla (all Chondrichthyes and Acipenseriformes), and iii) an asymmetric suspension with a ventral muscle and a varying number of ligaments (all Actinopterygii except for Acipenseriformes). Large eyes with presumably high spatial resolution have evolved in all groups. Multifocal lenses creating well-focused color images are also present in all groups studied. Stable and exact positioning of the lens, in many cases in combination with accommodative changes in lens position or shape, is achieved by all three types of lens suspension. It is somewhat surprising that lens suspensions are strikingly similar in Chondrichthyes and Acipenseriformes (Actinopterygii), while the suspension apparatus in Polypteriformes, usually being regarded as an actinopterygian group more basal than Acipenseriformes, are considerably more teleostean-like. This study completes a series of investigations on lens suspensions in nontetrapod vertebrates, covering all major groups except for the rare and highly derived coelacanths.

  16. Optical Material Characterization Using Microdisk Cavities

    Science.gov (United States)

    Michael, Christopher P.

    Since Jack Kilby recorded his "Monolithic Idea" for integrated circuits in 1958, microelectronics companies have invested billions of dollars in developing the silicon material system to increase performance and reduce cost. For decades, the industry has made Moore's Law, concerning cost and transistor density, a self-fulfilling prophecy by integrating technical and material requirements vertically down their supply chains and horizontally across competitors in the market. At recent technology nodes, the unacceptable scaling behavior of copper interconnects has become a major design constraint by increasing latency and power consumption---more than 50% of the power consumed by high speed processors is dissipated by intrachip communications. Optical networks at the chip scale are a potential low-power high-bandwidth replacement for conventional global interconnects, but the lack of efficient on-chip optical sources has remained an outstanding problem despite significant advances in silicon optoelectronics. Many material systems are being researched, but there is no ideal candidate even though the established infrastructure strongly favors a CMOS-compatible solution. This thesis focuses on assessing the optical properties of materials using microdisk cavities with the intention to advance processing techniques and materials relevant to silicon photonics. Low-loss microdisk resonators are chosen because of their simplicity and long optical path lengths. A localized photonic probe is developed and characterized that employs a tapered optical-fiber waveguide, and it is utilized in practical demonstrations to test tightly arranged devices and to help prototype new fabrication methods. A case study in AlxGa1-xAs illustrates how the optical scattering and absorption losses can be obtained from the cavity-waveguide transmission. Finally, single-crystal Er2O3 epitaxially grown on silicon is analyzed in detail as a potential CMOS-compatable gain medium due to its high Er3

  17. Optical integration of CAD/CAM materials.

    Science.gov (United States)

    Güth, Jan-Frederik; Magne, Pascal

    The optical integration (OI) of monolithic CAD/CAM materials under 4 illuminations was evaluated using a standardized and clinically relevant method. Eighteen inlays were manufactured and placed (glycerin gel). Standardized photos were taken under 4 illuminations (neutral white light direct and indirect illumination, cross-polarized light, fluorescent light). Six evaluators defined the optical integration score (OIS) as the "visibility" of the restoration (0 = worst OI, 4 = optimal OI). The intact tooth served as control. The null hypothesis was that different illuminations did not influence the OI of CAD/CAM inlays. One-way ANOVA, followed by Scheffe's post hoc, was applied (P = 0.05). Neutral light direct illumination: OIS between 2.67 (IPS e.max CAD LT A1, ENAMIC A1) and 3.83 (IPS e.max CAD HT A1) with a mean of 3.28 (± 0.339). Indirect illumination: OIS from 1.00 (Paradigm MZ100 A1) to 2.41 (ENAMIC A1) with a mean of 1.88 (± 0.598). Fluorescent light: OIS between 0.75 and 3.25 with a mean of 1.67 (± 1.025). ENAMIC and VITA BLOCS Mark II showed the best optical integration in fluorescence. IPS e.max CAD, Paradigm MZ 100 demonstrated low fluorescence; Lava Ultimate high fluorescence. OI was influenced by different illumination. A simple method accessible to clinicians for additional evaluation of CAD/CAM materials in daily practice is presented. All materials showed excellent OI under direct illumination with neutral white light. The most pronounced differences in optical integration between tooth and evaluated materials were observed under fluorescent light.

  18. Active materials for integrated optic applications

    Science.gov (United States)

    Hayden, Joseph S.; Funk, David S.; Veasey, David L.; Peters, Philip M.; Sanford, Norman A.

    1999-11-01

    The ability to engineer glass properties through the selection and adjustment of chemical composition continues to make glass a leading material in both active and passive applications. The development of optimal glass compositions for integrated optical applications requires a number of considerations that are often at variance with one another. Of critical importance is that the glass offers compatibility with standard ion exchange technologies, allowing fabrication of guided wave structures. In addition, for application as an active material, the resultant structures must be characterized by absence of inclusions and low absorption at the lasing wavelength, putting demands on both the selection and identity of the raw materials used to prepare the glass. We report on the development of an optimized glass composition for integrated optic applications that combines good laser properties with good chemical durability allowing for a wide range of chemical processing steps to be employed without substrate deterioration. In addition, care was taken during the development of this glass to insure that the selected composition was consistent with manufacturing technology for producing high optical quality glass. We present the properties of the resultant glasses, including results of detailed chemical and laser properties, for use in the design and modeling of active waveguides prepared with these glasses.

  19. Enhancement in second harmonic generation efficiency, laser damage threshold and optical transparency of Mn 2+ doped L-alanine crystals: A correlation with crystalline perfection

    Science.gov (United States)

    Kushwaha, S. K.; Rathee, S. P.; Maurya, K. K.; Bhagavannarayana, G.

    2011-08-01

    Effect on crystalline perfection, second harmonic generation (SHG) efficiency, laser damage threshold (LDT) and optical transparency due to Mn 2+ doping in L-alanine crystals has been investigated. The crystalline perfection of pure and doped crystals was evaluated by high-resolution X-ray diffractometry, which revealed the improvement in the crystalline perfection at low and moderate doping concentrations. At moderate and high concentrations, the Mn 2+ ions were found to be incorporated predominantly at the interstitial sites of the crystalline matrix. The actual incorporated amount of dopants in the crystals was analyzed by atomic absorption spectroscopy. The optical transparency, SHG efficiency, and laser damage threshold of the grown crystals with different concentrations of Mn 2+ were investigated. From these studies it is revealed that Mn 2+ doping lead to a considerable enhancement in the measured nonlinear optical properties with a correlation on crystalline perfection.

  20. Optical properties of zirconium oxynitride films: The effect of composition, electronic and crystalline structures

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, P. [Centro de Física, Universidade do Minho, 4710-057 Braga (Portugal); Borges, J., E-mail: joelborges@fisica.uminho.pt [Centro de Física, Universidade do Minho, 4710-057 Braga (Portugal); Department of Control Engineering, Faculty of Electrical Engineering, Czech Technical University in Prague, Technická 2, Prague 6 (Czech Republic); Rodrigues, M.S. [Centro de Física, Universidade do Minho, 4710-057 Braga (Portugal); Barradas, N.P. [Centro de Ciências e Tecnologias Nucleares, Instituto Superior Técnico, Universidade de Lisboa, E.N. 10 (km 139,7), 2695-066 Bobadela LRS (Portugal); Alves, E. [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisbon (Portugal); Espinós, J.P.; González-Elipe, A.R. [Instituto de Ciencia de Materiales de Sevilla (CSIC-University Sevilla), Avda. Américo Vespucio 49, 41092 Sevilla (Spain); Cunha, L.; Marques, L.; Vasilevskiy, M.I.; Vaz, F. [Centro de Física, Universidade do Minho, 4710-057 Braga (Portugal)

    2015-12-15

    Highlights: • Optical behaviour of ZrO{sub x}N{sub y} films were correlated with structural properties. • A continuous depopulation of the d-band and an opening of an energy gap was observed. • Drude–Lorentz parameters changed for the metallic samples. • Optical bandgap of the films increases with non-metallic elements incorporation. - Abstract: This work is devoted to the investigation of zirconium oxynitride (ZrO{sub x}N{sub y}) films with varied optical responses prompted by the variations in their compositional and structural properties. The films were prepared by dc reactive magnetron sputtering of Zr, using Ar and a reactive gas mixture of N{sub 2} + O{sub 2} (17:3). The colour of the films changed from metallic-like, very bright yellow-pale and golden yellow, for low gas flows to red-brownish for intermediate gas flows. Associated to this colour change there was a significant decrease of brightness. With further increase of the reactive gas flow, the colour of the samples changed from red-brownish to dark blue or even to interference colourations. The variations in composition disclosed the existence of four different zones, which were found to be closely related with the variations in the crystalline structure. XRD analysis revealed the change from a B1 NaCl face-centred cubic zirconium nitride-type phase for films prepared with low reactive gas flows, towards a poorly crystallized over-stoichiometric nitride phase, which may be similar to that of Zr{sub 3}N{sub 4} with some probable oxygen inclusions within nitrogen positions, for films prepared with intermediate reactive gas flows. For high reactive gas flows, the films developed an oxynitride-type phase, similar to that of γ-Zr{sub 2}ON{sub 2} with some oxygen atoms occupying some of the nitrogen positions, evolving to a ZrO{sub 2} monoclinic type structure within the zone where films were prepared with relatively high reactive gas flows. The analysis carried out by reflected electron energy

  1. Photo-orientation of azobenzene-containing liquid-crystalline materials by means of domain structure rearrangement.

    Science.gov (United States)

    Bogdanov, Alexey V; Vorobiev, Andrey Kh

    2013-11-07

    A novel mechanism of photo-orientation of azobenzene-containing liquid-crystalline materials is proposed. This mechanism is based on the notion of photochemically induced domain rearrangement driven by destabilization of liquid-crystalline phase in light absorbing domains due to photochemical formation of non-mesogenic cis-azobenzene moieties. The experimental evidence of photoinduced movement of a domain boundary is presented, and the velocity of this movement is measured. A mathematical model for photo-orientation of a polydomain azobenzene-containing material is formulated. The values of model parameters for a liquid-crystalline azopolymer have been measured in separate experiments. Theoretical predictions demonstrate quantitative agreement with the experimental observations.

  2. Comparison of defects in crystalline oxide semiconductor materials by electron spin resonance

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Tokiyoshi, E-mail: toki@rins.ryukoku.ac.jp; Kimura, Mutsumi [Department of Electronics and Informatics, Faculty of Science and Technology, Ryukoku University, 1-438, 1-5 Yokotani, Seta Oe-Cho, Otsu, Shiga 520-2194, Japan and Joint Research Center for Science and Technology, Ryukoku University, 1-5 Yokotani, Seta Oe-Cho, Otsu, Shiga 520-2194 (Japan)

    2015-03-15

    Defects in crystalline InGaZnO{sub 4} (IGZO) induced by plasma were investigated using electron spin resonance (ESR). Thermal stabilities and g factors of two ESR signals (A and B observed at g = 1.939 and 2.003, respectively) in IGZO were different from those of the ESR signals observed in component materials such as Ga{sub 2}O{sub 3} (signal observed at g = 1.969), In{sub 2}O{sub 3} (no signal), and ZnO (signal observed at g = 1.957). Signal A in IGZO increased upon annealing at 300 °C for 1 h, but decreased when annealing was continued for more than 2 h. On the other hand, signal B decreased upon annealing at 300 °C for 1 h. The ESR signal in ZnO decayed in accordance with a second-order decay model with a rate constant of 2.1 × 10{sup −4} s{sup −1}; however, this phenomenon was not observed in other materials. This difference might have been due to randomly formed IGZO lattices such as asymmetrical (Ga, Zn)O and In-O layers. Defects in signals A and B in IGZO were formed in trap states (at the deep level) and tail states, respectively.

  3. Optical characterization of ion-doped crystalline and glassy matrices operating under hostile environmental conditions

    Science.gov (United States)

    Baccaro, S.; Cemmi, A.

    2016-10-01

    The aim of this work is to give an overall picture of the activity on gamma radiation effects in the field of scintillators (crystals, glasses) with specific mention to the role of ions doped in different crystalline and glassy matrices. Interesting results were obtained in terms of radiation hardness improvement and of physical-chemical properties modification as a function of the nature of dopant (i.e. rare earth as well as metallic ions) and of the scintillating host glassy and glass-ceramic matrix (silicate, phosphate, borate, oxyfluoride and mixed oxides glasses). The research activities were carried out at the 60Co gamma Calliope plant, a pool-type irradiation facility located at the Research Centre ENEA-Casaccia (Rome). Since the eighties, the Calliope facility is deeply involved in radiation processing research on materials and on devices to be used in hostile radiation environment such as nuclear plants, aerospace and High Energy Physics experiments, in the framework of international projects and collaboration with industries and research institutions.

  4. Understanding the interfacial properties of nanostructured liquid crystalline materials for surface-specific delivery applications.

    Science.gov (United States)

    Dong, Yao-Da; Larson, Ian; Barnes, Timothy J; Prestidge, Clive A; Allen, Stephanie; Chen, Xinyong; Roberts, Clive J; Boyd, Ben J

    2012-09-18

    Nonlamellar liquid crystalline dispersions such as cubosomes and hexosomes have great potential as novel surface-targeted active delivery systems. In this study, the influence of internal nanostructure, chemical composition, and the presence of Pluronic F127 as a stabilizer, on the surface and interfacial properties of different liquid crystalline particles and surfaces, was investigated. The interfacial properties of the bulk liquid crystalline systems with coexisting excess water were dependent on the internal liquid crystalline nanostructure. In particular, the surfaces of the inverse cubic systems were more hydrophilic than that of the inverse hexagonal phase. The interaction between F127 and the bulk liquid crystalline systems depended on the internal liquid crystalline structure and chemical composition. For example, F127 adsorbed to the surface of the bulk phytantriol cubic phase, while for monoolein cubic phase, F127 was integrated into the liquid crystalline structure. Last, the interfacial adsorption behavior of the dispersed liquid crystalline particles also depended on both the internal nanostructure and the chemical composition, despite the dispersions all being stabilized using F127. The findings highlight the need to understand the specific surface characteristics and the nature of the interaction with colloidal stabilizer for understanding and optimizing the behavior of nonlamellar liquid crystalline systems in surface delivery applications.

  5. Optical thin films and coatings from materials to applications

    CERN Document Server

    Flory, Francois

    2013-01-01

    Optical coatings, including mirrors, anti-reflection coatings, beam splitters, and filters, are an integral part of most modern optical systems. This book provides an overview of thin film materials, the properties, design and manufacture of optical coatings and their use across a variety of application areas.$bOptical coatings, including mirrors, anti-reflection coatings, beam splitters, and filters, are an integral part of most modern optical systems. Optical thin films and coatings provides an overview of thin film materials, the properties, design and manufacture of optical coatings and their use across a variety of application areas. Part one explores the design and manufacture of optical coatings. Part two highlights unconventional features of optical thin films including scattering properties of random structures in thin films, optical properties of thin film materials at short wavelengths, thermal properties and colour effects. Part three focusses on novel materials for optical thin films and coatings...

  6. Investigating the relative influences of molecular dimensions and binding energies on diffusivities of guest species inside nanoporous crystalline materials

    NARCIS (Netherlands)

    Krishna, R.; van Baten, J.M.

    2012-01-01

    The primary objective of this article is to investigate the relative influences of molecular dimensions and adsorption binding energies on unary diffusivities of guest species inside nanoporous crystalline materials such as zeolites and metal-organic frameworks (MOFs). The investigations are based o

  7. Immunity induced by a broad class of inorganic crystalline materials is directly controlled by their chemistry.

    Science.gov (United States)

    Williams, Gareth R; Fierens, Kaat; Preston, Stephen G; Lunn, Daniel; Rysnik, Oliwia; De Prijck, Sofie; Kool, Mirjam; Buckley, Hannah C; Lambrecht, Bart N; O'Hare, Dermot; Austyn, Jonathan M

    2014-06-02

    There is currently no paradigm in immunology that enables an accurate prediction of how the immune system will respond to any given agent. Here we show that the immunological responses induced by members of a broad class of inorganic crystalline materials are controlled purely by their physicochemical properties in a highly predictable manner. We show that structurally and chemically homogeneous layered double hydroxides (LDHs) can elicit diverse human dendritic cell responses in vitro. Using a systems vaccinology approach, we find that every measured response can be modeled using a subset of just three physical and chemical properties for all compounds tested. This correlation can be reduced to a simple linear equation that enables the immunological responses stimulated by newly synthesized LDHs to be predicted in advance from these three parameters alone. We also show that mouse antigen-specific antibody responses in vivo and human macrophage responses in vitro are controlled by the same properties, suggesting they may control diverse responses at both individual component and global levels of immunity. This study demonstrates that immunity can be determined purely by chemistry and opens the possibility of rational manipulation of immunity for therapeutic purposes.

  8. Influence of adsorption thermodynamics on guest diffusivities in nanoporous crystalline materials.

    Science.gov (United States)

    Krishna, Rajamani; van Baten, Jasper M

    2013-06-07

    Published experimental data, underpinned by molecular simulations, are used to highlight the strong influence of adsorption thermodynamics on diffusivities of guest molecules inside ordered nanoporous crystalline materials such as zeolites, metal-organic frameworks (MOFs), and zeolitic imidazolate frameworks (ZIFs). For cage-type structures (e.g. LTA, CHA, DDR, and ZIF-8), the variation of the free energy barrier for inter-cage hopping across the narrow windows, -δFi, provides a rationalization of the observed strong influence of pore concentrations, ci, on diffusivities. In open structures with large pore volumes (e.g. FAU, IRMOF-1, CuBTC) and within channels (MFI, BEA, MgMOF-74, MIL-47, MIL-53), the pore concentration (ci) dependence of the self- (Di,self), Maxwell-Stefan (Đi), and Fick (Di) diffusivities are often strongly dictated by the inverse thermodynamic correction factor, 1/Γi≡∂ln ci/∂ln pi; the magnitudes of the diffusivities are dictated by the binding energies for adsorption. For many guest-host combinations Đi-ci dependence is directly related to the 1/Γivs. ci variation. When molecular clustering occurs, we get 1/Γi > 1, causing unusual Đivs. ci dependencies. The match, or mis-match, between the periodicity of the pore landscape and the conformations of adsorbed chain molecules often leads to non-monotonic variation of diffusivities with chain lengths.

  9. Optical dynamic deformation measurements at translucent materials.

    Science.gov (United States)

    Philipp, Katrin; Koukourakis, Nektarios; Kuschmierz, Robert; Leithold, Christoph; Fischer, Andreas; Czarske, Jürgen

    2015-02-15

    Due to their high stiffness-to-weight ratio, glass fiber-reinforced polymers are an attractive material for rotors, e.g., in the aerospace industry. A fundamental understanding of the material behavior requires non-contact, in-situ dynamic deformation measurements. The high surface speeds and particularly the translucence of the material limit the usability of conventional optical measurement techniques. We demonstrate that the laser Doppler distance sensor provides a powerful and reliable tool for monitoring radial expansion at fast rotating translucent materials. We find that backscattering in material volume does not lead to secondary signals as surface scattering results in degradation of the measurement volume inside the translucent medium. This ensures that the acquired signal contains information of the rotor surface only, as long as the sample surface is rough enough. Dynamic deformation measurements of fast-rotating fiber-reinforced polymer composite rotors with surface speeds of more than 300 m/s underline the potential of the laser Doppler sensor.

  10. Smart Optical Material Characterization System and Method

    Science.gov (United States)

    Choi, Sang Hyouk (Inventor); Park, Yeonjoon (Inventor)

    2015-01-01

    Disclosed is a system and method for characterizing optical materials, using steps and equipment for generating a coherent laser light, filtering the light to remove high order spatial components, collecting the filtered light and forming a parallel light beam, splitting the parallel beam into a first direction and a second direction wherein the parallel beam travelling in the second direction travels toward the material sample so that the parallel beam passes through the sample, applying various physical quantities to the sample, reflecting the beam travelling in the first direction to produce a first reflected beam, reflecting the beam that passes through the sample to produce a second reflected beam that travels back through the sample, combining the second reflected beam after it travels back though the sample with the first reflected beam, sensing the light beam produced by combining the first and second reflected beams, and processing the sensed beam to determine sample characteristics and properties.

  11. Optical Properties of Spin-Coated TiO2 Antireflection Films on Textured Single-Crystalline Silicon Substrates

    Directory of Open Access Journals (Sweden)

    Ryosuke Watanabe

    2015-01-01

    Full Text Available Antireflection coating (ARC prepared by a wet process is beneficial for low cost fabrication of photovoltaic cells. In this study, we investigated optical properties and morphologies of spin-coated TiO2 ARCs on alkaline textured single-crystalline silicon wafers. Reflectance spectra of the spin-coated ARCs on alkaline textured silicon wafers exhibit no interferences and low reflectance values in the entire visible range. We modeled the structures of the spin-coated films for ray tracing numerical calculation and compared numerically calculated reflectance spectra with the experimental results. This is the first report to clarify the novel optical properties experimentally and theoretically. Optical properties of the spin-coated ARCs without interference are due to the fractional nonuniformity of the thickness of the spin-coated ARCs that cancels out the interference of the incident light.

  12. First-principles computation of mantle materials in crystalline and amorphous phases

    Science.gov (United States)

    Karki, Bijaya B.

    2015-03-01

    First-principles methods based on density functional theory are used extensively in the investigation of the behavior and properties of mantle materials over broad ranges of pressure, temperature, and composition that are relevant. A review of computational results reported during the last couple of decades shows that essentially all properties including structure, phase transition, equation of state, thermodynamics, elasticity, alloying, conductivity, defects, interfaces, diffusivity, viscosity, and melting have been calculated from first principles. Using MgO, the second most abundant oxide of Earth's mantle, as a primary example and considering many other mantle materials in their crystalline and amorphous phases, we have found that most properties are strongly pressure dependent, sometimes varying non-monotonically and anomalously, with the effects of temperature being systematically suppressed with compression. The overall agreement with the available experimental data is excellent; it is remarkable that the early-calculated results such as shear wave velocities of two key phases, MgO and MgSiO3 perovskite, were subsequently reproduced by experimentation covering almost the entire mantle pressure regime. As covered in some detail, the defect formation and migration enthalpies of key mantle materials increase with pressure. The predicted trend is that partial MgO Schottky defects are energetically most favorable in Mg-silicates but their formation enthalpies are high. So, the diffusion in the mantle is likely to be in the extrinsic regime. Preliminary results on MgO and forsterite hint that the grain boundaries can accommodate point defects (including impurities) and enhance diffusion rates at all pressures. The structures are highly distorted in the close vicinity of the defects and at the interface with excess space. Recent simulations of MgO-SiO2 binary and other silicate melts have found that the melt self-diffusion and viscosity vary by several orders of

  13. Combinatorial parallel synthesis and automated screening of a novel class of liquid crystalline materials.

    Science.gov (United States)

    Deeg, Oliver; Kirsch, Peer; Pauluth, Detlef; Bäuerle, Peter

    2002-12-07

    Combinatorial parallel synthesis has led to the rapid generation of a single-compound library of novel fluorinated quaterphenyls. Subsequent automated screening revealed liquid crystalline (LC) behaviour and gave qualitative relationships of molecular structures and solid state properties.

  14. Carrier mobility in mesoscale heterogeneous organic materials: Effects of crystallinity and anisotropy on efficient charge transport

    Science.gov (United States)

    Kobayashi, Hajime; Shirasawa, Raku; Nakamoto, Mitsunori; Hattori, Shinnosuke; Tomiya, Shigetaka

    2017-07-01

    Charge transport in the mesoscale bulk heterojunctions (BHJs) of organic photovoltaic devices (OPVs) is studied using multiscale simulations in combination with molecular dynamics, the density functional theory, the molecular-level kinetic Monte Carlo (kMC) method, and the coarse-grained kMC method, which was developed to estimate mesoscale carrier mobility. The effects of the degree of crystallinity and the anisotropy of the conductivity of donors on hole mobility are studied for BHJ structures that consist of crystalline and amorphous pentacene grains that act as donors and amorphous C60 grains that act as acceptors. We find that the hole mobility varies dramatically with the degree of crystallinity of pentacene because it is largely restricted by a low-mobility amorphous region that occurs in the hole transport network. It was also found that the percolation threshold of crystalline pentacene is relatively high at approximately 0.6. This high percolation threshold is attributed to the 2D-like conductivity of crystalline pentacene, and the threshold is greatly improved to a value of approximately 0.3 using 3D-like conductive donors. We propose essential guidelines to show that it is critical to increase the degree of crystallinity and develop 3D conductive donors for efficient hole transport through percolative networks in the BHJs of OPVs.

  15. Optical Characterization of Window Materials for Aerospace Applications

    Science.gov (United States)

    Tedjojuwono, Ken K.; Clark, Natalie; Humphreys, William M., Jr.

    2013-01-01

    An optical metrology laboratory has been developed to characterize the optical properties of optical window materials to be used for aerospace applications. Several optical measurement systems have been selected and developed to measure spectral transmittance, haze, clarity, birefringence, striae, wavefront quality, and wedge. In addition to silica based glasses, several optical lightweight polymer materials and transparent ceramics have been investigated in the laboratory. The measurement systems and selected empirical results for non-silica materials are described. These measurements will be used to form the basis of acceptance criteria for selection of window materials for future aerospace vehicle and habitat designs.

  16. Optical characterization of window materials for aerospace applications

    Science.gov (United States)

    Tedjojuwono, Ken K.; Clark, Natalie; Humphreys, William M.

    2013-09-01

    An optical metrology laboratory has been developed to characterize the optical properties of optical window materials to be used for aerospace applications. Several optical measurement systems have been selected and developed to measure spectral transmittance, haze, clarity, birefringence, striae, wavefront quality, and wedge. In addition to silica based glasses, several optical lightweight polymer materials and transparent ceramics have been investigated in the laboratory. The measurement systems and selected empirical results for non-silica materials are described. These measurements will be used to form the basis of acceptance criteria for selection of window materials for future aerospace vehicle and habitat designs.

  17. Dynamic vapor sorption as a tool for characterization and quantification of amorphous content in predominantly crystalline materials.

    Science.gov (United States)

    Sheokand, Sneha; Modi, Sameer R; Bansal, Arvind K

    2014-11-01

    It is well established that pharmaceutical processing can cause disruption of the crystal structure, leading to generation of amorphous content in crystalline materials. The presence of even a small amount of amorphous form, especially on the surface of crystalline material, can affect processing, performance, and stability of a drug product. This necessitates the need to quantify, monitor, and control the amorphous form. Numerous analytical techniques have been reported for the quantification of amorphous phase, but issues of sensitivity, suitability, limit of detection, and quantitation pose significant challenges. The present review focuses on use of dynamic vapor sorption (DVS) for quantification of amorphous content in predominantly crystalline materials. The article discusses (1) theoretical and experimental considerations important for developing a quantification method, (2) methods used for quantification of amorphous content, (3) basis for selecting a suitable methodology depending on the properties of a material, and (4) role of various instrument and sample-related parameters in designing a protocol for quantification of amorphous content. Finally, DVS-based hyphenated techniques have been discussed as they can offer higher sensitivity for quantification of amorphous content.

  18. Thermally Stable Heterocyclic Imines as New Potential Nonlinear Optical Materials

    Science.gov (United States)

    Nesterov, Volodymyr V.; Antipin, Mikhail Y.; Nesterov, Vladimir N.; Moore, Craig E.; Cardelino, Beatriz H.; Timofeeva, Tatiana V.

    2004-01-01

    In the course of a search for new thermostable acentric nonlinear optical crystalline materials, several heterocyclic imine derivatives were designed, with the general structure D-pi-A(D'). Introduction of a donor amino group (D') into the acceptor moiety was expected to bring H-bonds into their crystal structures, and so to elevate their melting points and assist in an acentric molecular packing. Six heterocycle-containing compounds of this type were prepared, single crystals were grown for five of them, and these crystals were characterized by X-ray analysis. A significant melting temperature elevation was found for all of the synthesized compounds. Three of the compounds were also found to crystallize in acentric space groups. One of the acentric compounds is built as a three-dimensional H-bonded molecular network. In the other two compounds, with very similar molecular structure, the molecules form one-dimensional H-bonded head-to-head associates (chains). These chains are parallel in two different crystallographic directions and form very unusual interpenetrating chain patterns in an acentric crystal. Two of the compounds crystallized with centrosymmetric molecular packing.

  19. Synthesis, Characterization and Photoinduction of Optical Anisotropy in Liquid Crystalline Diblock Azo-Copolymers

    DEFF Research Database (Denmark)

    Forcén, P; Oriol, L; Sánchez, C

    2007-01-01

    Diblock copolymers with polymethyl methacrylate and side chain liquid crystalline WC) azopolymethacrylate blocks were synthesized by atom transfer radical polymerization (ATRP). The azobeazene content in these copolymers ranges from 52 to 7 wt %. For an azo conteat dowri to 20% they exhibit a LC ...

  20. Side-chain liquid-crystalline polyesters for optical information storage

    DEFF Research Database (Denmark)

    Hvilsted, Søren; Andruzzi, F.; Ramanujam, P.S.

    1992-01-01

    We report erasable holographic recording with a resolution of at least 2500 lines/mm on unoriented films of side-chain liquid-crystalline polyesters. Recording energies of approximately 1 J/cm2 have been used. We have obtained a diffraction efficiency of approximately 30% with polarization record...

  1. Influence of L-alanine doping on crystalline perfection, SHG efficiency, optical and mechanical properties of KDP single crystals

    Science.gov (United States)

    Shakir, Mohd.; Ganesh, V.; Riscob, B.; Maurya, K. K.; Wahab, M. A.; Bhagavannarayana, G.; Kishan Rao, K.

    2011-09-01

    Pure and L-alanine (LA) doped single crystals of potassium dihydrogen orthophosphate (KDP) were grown by slow evaporation solution technique (SEST) in aqueous solution at ambient temperature. Powder X-ray diffraction study was done to confirm the crystal system and lattice parameters of KDP. No additional phases were observed at all doping concentrations (1-7.5 mol%), which was further confirmed by FT-Raman spectroscopy analysis. The influence of LA doping on the crystalline perfection was assessed by high-resolution X-ray diffractometry (HRXRD) analysis. HRXRD studies revealed that the grown crystals could accommodate LA at the interstitial positions in the crystalline matrix of KDP up to some critical concentration without any deterioration in the crystalline perfection. Above this concentration, very low angle structural grain boundaries were developed and it seems that the excess LA above the critical concentration was segregated along the grain boundaries. The SHG efficiency was measured using the Kurtz powder technique. The relative SHG efficiency of the crystals was found to be increased with doping concentration up to 5 mol% and above this it decreases. Optical transmission study also revealed the same behavior with enhancement up to 5 mol% concentration and later decreased. The hardness values were found to be increased by increasing the doping concentration.

  2. Passive electro optical materials and applications

    Science.gov (United States)

    Diekstall, K.; Gutu-Nelle, A.; Lauckner, J.; Lutz, F.; Mueller, S.; Seibold, G.; Schichl, H.; Volz, H.

    1980-12-01

    Electro-optical ceramics made of lead/lanthanum/zirconates/titanates (PLZT) can be economically manufactured by coprecipitation of the base materials and by vacuum sintering of the sintering of the green blocks. Magnesium additives reduce by half the operating voltage required to achieve an equal contrast ratio. Transparent electrodes deposited by sputtering tin-indium oxide remain transparent up to 2400 nm. The contrast ratio in the scattering mode amounts typically to 100 : 1 at 500 nm and 5 : 1 at 1000 nm, while in the birefrigence mode it amounts typically to 10,000 : 1 at 800 V/mm, at a thickness of 0.4 mm. Functional blocks were designed to demonstrate and test applications: a laser modular; a light intensity attenuator; welding protection goggles; and numerical displays. The first promising results with sputtered thin films indicate future suitability for displays. Multiple light modulators for opto-electronic nonimpact printing presently appear to be the most important application area.

  3. Optical bandgap of ultra-thin amorphous silicon films deposited on crystalline silicon by PECVD

    National Research Council Canada - National Science Library

    Abdulraheem, Yaser; Gordon, Ivan; Bearda, Twan; Meddeb, Hosny; Poortmans, Jozef

    2014-01-01

    ...) in a wavelength range from 250 nm to 850 nm. The data was fitted to a Tauc-Lorentz optical model and the fitting parameters were extracted and used to compute the refractive index, extinction coefficient and optical bandgap...

  4. Characterizaticr of Solid State Laser and Nonlinear Optical Materials.

    Science.gov (United States)

    1995-02-02

    materials useful in the different methods for obtaining frequency agility: narrow line emitters with multiple lasing channels and nonlinear optical materials . In...codoped with two or more rare earth ions were studied and computers models developed to explain their spectral dynamics. The nonlinear optical materials investigated

  5. Optical Waveguides from Organic/Inorganic Hybrid Materials

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Organic/inorganic material has attracted great attentions because its importance as photonic materials. We report on our recent results on organic/inorganic hybrid sol-gel materials and optical waveguides like splitter, thermo-optic switch and micro-cavity laser.

  6. Optical Waveguides from Organic/Inorganic Hybrid Materials

    Institute of Scientific and Technical Information of China (English)

    Liying Liu; Lei Xu; Wencheng Wang

    2003-01-01

    Organic/inorganic material has attracted great attentions because its importance as photonic materials. We report on our recent results on organic/inorganic hybrid sol-gel materials and optical waveguides like splitter,thermo-optic switch and micro-cavity laser.

  7. Biocompatibility of glass-crystalline materials obtained by the sol-gel method: effect on macrophage function.

    Science.gov (United States)

    Turyna, B; Milc, J; Laczka, A; Cholewa, K; Laczka, M

    1996-07-01

    The aim of this work was to confirm in vitro biocompatibility of a new gel-derived glass-crystalline material containing hydroxyapatite and wollastonite phases. For the purpose of comparison, studies were also carried out for a material of the same chemical composition obtained by the traditional melting method. We examined the behaviour and response of cells cultured in the presence of the studied materials. The level of activation of macrophages in culture was determined using three different methods: measurement of respiratory burst by chemiluminescence, nitrite assay and by bioassay of secreted cytokines after immunoelectrophoresis of acute phase proteins from hepatoma cells. All our results show a relatively low, close to control level, activation of macrophages exposed to the studied materials. This indicates a good biocompatibility of both the gel-derived material and the material obtained by the traditional melting method.

  8. Smart Materials for Electromagnetic and Optical Applications

    Science.gov (United States)

    Ramesh, Prashanth

    dissertation demonstrates GaN as a candidate material well suited for novel microelectromechanical systems. The potential of GaN for MEMS is demonstrated via the design, analysis, fabrication, testing and characterization of an optical microswitch device actuated by piezoelectric and electrostrictive means. The piezoelectric and electrostrictive properties of GaN and its differences from common piezoelectrics are discussed before elaborating on the device configuration used to implement the microswitch device. Next, the development of two recent fabrication technologies, Photoelectrochemical etch and Bias-enabled Dark Electrochemical etch, used to realize the 3-dimensional device structure in GaN are described in detail. Finally, an ultra-low-cost, laser-based, non-contact approach to test and characterize the microswitch device is described, followed by the device testing results.

  9. Synthesis, optical, structural, and electrical properties of single-crystalline CdS nanobelts

    Energy Technology Data Exchange (ETDEWEB)

    Alqahtani, Mohammed S. [King Saud University, Department of Physics and Astronomy, Riyadh (Saudi Arabia); Hadia, N.M.A.; Mohamed, S.H. [Sohag University, Physics Department, Faculty of Science, Sohag (Egypt)

    2017-04-15

    CdS nanobelts (NBs) were synthesized by vapor transport of CdS powders. The growth was carried out without any catalyst on quartz and Si (100) substrates. The synthesized CdS NBs were examined by transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM) and selected area electron diffraction (SAED), high-resolution transmission electron microscopy (HR-TEM), X-ray powder diffraction (XRD), energy dispersion analysis of X-ray (EDAX), spectrophotometer, and photoluminescence spectroscopy. CdS NBs were indexed as hexagonal wurtzite structure. The growth was via vapor-solid growth mechanism and along the [100] direction. The refractive index was evaluated in the transparent region, as suggested by Swanepoel, using the envelope method. The refractive index values and the extinction coefficient were decreased by increasing the wavelength. The calculated optical band gap was 2.50 eV. The photoluminescence (PL) spectrum of the synthesized CdS NBs exhibited a green emission peak at 510 nm and a broad red emission peak at 696 nm. The conductivity measurements were achieved, in the temperature range from 300 to 600 K, using the conventional two-probe technique. Two different slopes with different activation energies of 0.618 and 0.215 eV were obtained. The CdS NBs are likely being novel functional materials. Thus, they can be used in the manufacture of innovative optoelectronic nanodevices. (orig.)

  10. Synthesis, optical, structural, and electrical properties of single-crystalline CdS nanobelts

    Science.gov (United States)

    Alqahtani, Mohammed S.; Hadia, N. M. A.; Mohamed, S. H.

    2017-04-01

    CdS nanobelts (NBs) were synthesized by vapor transport of CdS powders. The growth was carried out without any catalyst on quartz and Si (100) substrates. The synthesized CdS NBs were examined by transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM) and selected area electron diffraction (SAED), high-resolution transmission electron microscopy (HR-TEM), X-ray powder diffraction (XRD), energy dispersion analysis of X-ray (EDAX), spectrophotometer, and photoluminescence spectroscopy. CdS NBs were indexed as hexagonal wurtzite structure. The growth was via vapor-solid growth mechanism and along the [100] direction. The refractive index was evaluated in the transparent region, as suggested by Swanepoel, using the envelope method. The refractive index values and the extinction coefficient were decreased by increasing the wavelength. The calculated optical band gap was 2.50 eV. The photoluminescence (PL) spectrum of the synthesized CdS NBs exhibited a green emission peak at 510 nm and a broad red emission peak at 696 nm. The conductivity measurements were achieved, in the temperature range from 300 to 600 K, using the conventional two-probe technique. Two different slopes with different activation energies of 0.618 and 0.215 eV were obtained. The CdS NBs are likely being novel functional materials. Thus, they can be used in the manufacture of innovative optoelectronic nanodevices.

  11. Manufacture of amorphous and poly-crystalline materials with the sol-gel process; Fabricacion de materiales amorfos y policristalinos con la ruta sol-gel

    Energy Technology Data Exchange (ETDEWEB)

    Castaneda-Contreras, J. [Centro Universitario de Los Lagos, Universidad de Guadalajara, Guadalajara, Jalisco (Mexico)

    2006-01-15

    The sun-gel process is a chemical route that allows the manufacture of amorphous and poly-crystalline materials in a relatively simple way. New materials can be obtained, materials that through the traditional manufacture methods, are very difficult to obtain, such as oxide combinations (SiO{sub 2}, TiO{sub 2}, ZrO{sub 2}, etc.), and that, when being produced by traditional methods, they run the risk of being contaminated with rare earth ions or organic dyes. The unique structures, micro- structures and compounds that can be made with the sun-gel process open many possibilities for practical applications, to name a few: the manufacture of optical components, preforms for optical fibers, dielectric coatings, superconductors, waveguides, nanoparticles, solar cells, etc. [Spanish] El proceso sol-gel es una ruta quimica que permite fabricar materiales amorfos y policristalinos de forma relativamente sencilla. Se pueden obtener nuevos materiales que a traves de los metodos tradicionales de fabricacion son muy dificiles de obtener, tales como combinaciones de oxidos (SiO{sub 2}, TiO{sub 2}, ZrO{sub 2}, etc.), y que, de ser producidos por metodos tradicionales corren el riesgo de contaminarse con iones de tierras raras o colorantes organicos. Las estructuras unicas, micro estructuras y compuestos que pueden hacerse con el proceso sol-gel abren muchas posibilidades para aplicaciones practicas, por nombrar algunas, la fabricacion de componentes opticos, preformas para fibras opticas, recubrimientos dielectricos, superconductores, guias de onda, nanoparticulas, celdas solares, etc.

  12. Durable innovative solar optical materials: the international challenge

    Energy Technology Data Exchange (ETDEWEB)

    Lampert, C.M.

    1982-01-01

    A variety of optical coatings are discussed in the context of solar energy utilization. Well known coatings such as heat mirrors, selective absorbers, and reflective films are covered briefly. Emphasis is placed on the materials limitations and design choices for various lesser known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, fluorescent concentrator materials, holographic films, cold mirrors, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials research is only now being considered, and various design and durability issues must be addressed.

  13. Durable innovative solar optical materials - the international challenge

    Science.gov (United States)

    Lampert, Carl M.

    1982-04-01

    A variety of optical coatings are discussed in the context of solar energy utilization. Well known coatings such as heat mirrors, selective absorbers, and reflective films are covered briefly. Emphasis is placed on the materials limitations and design choices for various lesser known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, fluorescent concentrator materials, holographic films, cold mirrors, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials research is only now being considered, and various design and durability issues must be addressed.

  14. Durable innovative solar optical materials: The international challenge

    Science.gov (United States)

    Lampert, C. M.

    1982-07-01

    A variety of optical coatings is discussed in the context of solar energy utilization. Well known coatings such as heat mirrors, selective absorbers, and reflective films are covered briefly. Emphasis is placed on the materials limitations and design choices for various lesser known optical coatings and materials. Physical and optical properties are detailed for protective antireflection films, fluorescent concentrator materials, holographic films, cold mirrors, radiative cooling surfaces, and optical switching films including electrochromic, thermochromic, photochromic, and liquid crystal types. For many of these materials research is only now being considered, and various design and durability issues must be addressed.

  15. The CCP13 FibreFix program suite: semi-automated analysis of diffraction patterns from non-crystalline materials.

    Science.gov (United States)

    Rajkumar, Ganeshalingam; Al-Khayat, Hind A; Eakins, Felicity; Knupp, Carlo; Squire, John M

    2007-02-01

    The extraction of useful information from recorded diffraction patterns from non-crystalline materials is non-trivial and is not a well defined operation. Unlike protein crystallography where one expects to see well behaved diffraction spots in predictable positions defined by standard space groups, the diffraction patterns from non-crystalline materials are very diverse. They can range from uniaxially oriented fibre patterns which are completely sampled as Bragg peaks, but rotationally averaged around the fibre axis, to fibre patterns that are completely unsampled, to either kind of pattern with considerable axial misalignment (disorientation), to liquid-like order and even to mixtures of these various structure types. In the case of protein crystallography, the specimen is generated artificially and only used if the degree of order is sufficient to yield a three-dimensional density map of high enough resolution to be interpreted sensibly. However, with non-crystalline diffraction, many of the specimens of interest are naturally occurring (e.g. cellulose, rubber, collagen, muscle, hair, silk) and to elucidate their structure it is necessary to extract structural information from the materials as they actually are and to whatever resolution is available. Even when synthetic fibres are generated from purified components (e.g. nylon, polyethylene, DNA, polysaccharides, amyloids etc.) and diffraction occurs to high resolution, it is rarely possible to obtain perfect uniaxial alignment. The CCP13 project was established in the 1990s to generate software which will be generally useful for analysis of non-crystalline diffraction patterns. Various individual programs were written which allowed separate steps in the analysis procedure to be carried out. Many of these programs have now been integrated into a single user-friendly package known as FibreFix, which is freely downloadable from http://www.ccp13.ac.uk. Here the main features of FibreFix are outlined and some of

  16. The Optical Properties of Crystalline Zn3Nb2O8 Nanomaterials Obtained by Hydrothermal Method

    OpenAIRE

    Mihaela Birdeanu; Mirela Vaida; Eugenia Fagadar-Cosma

    2015-01-01

    The present study is focused on the obtaining of the Zn3Nb2O8 nanomaterial using the hydrothermal method and its characterization through different techniques. X-ray diffraction at room temperature revealed that a novel crystalline form of the nanomaterial forms at 1100°C belonging to monoclinic space group C2/c. Field-emission scanning electron microscopy evidenced the columnar morphology of the particle’s agglomeration and the high resolution electron transmission microscopy confirms the me...

  17. A paint removal concept with side-chain liquid crystalline polymers as primer material

    NARCIS (Netherlands)

    Wielen, van der M.W.J.; Cohen Stuart, M.A.; Fleer, G.J.; Nieuwhof, R.P.; Marcelis, A.T.M.; Sudhölter, E.J.R.

    2001-01-01

    A new paint removal concept is introduced making use of a polymer primer layer with a sharp softening temperature. For this, a new class of side-chain liquid crystalline polymers with polar moieties in the backbone has been developed and studied in thin films. These polymers form lamellar-ordered

  18. Predicting the durability of basic crystalline rocks for use as road construction materials

    CSIR Research Space (South Africa)

    Paige-Green, P

    2006-02-27

    Full Text Available Slide 9 © CSIR 2006 www.csir.co.za Slide 10 © CSIR 2006 www.csir.co.za Basic crystalline rocks • No quartz • Primarily pyroxene and feldspar • 12 - 40 % pyroxene & 40 – 50% feldspar • Pyroxene (CaNa...

  19. Laser-Induced Forward Transfer-printing of focused ion beam pre-machined crystalline magneto-optic yttrium iron garnet micro-discs.

    Science.gov (United States)

    Sones, C L; Feinaeugle, M; Sposito, A; Gholipour, B; Eason, R W

    2012-07-02

    We present femtosecond laser-induced forward transfer of focused ion beam pre-machined discs of crystalline magneto-optic yttrium iron garnet (YIG) films. Debris-free circular micro-discs with smooth edges and surface uniformity have been successfully printed. The crystalline nature of the printed micro-discs has not been altered by the LIFT printing process, as was confirmed via micro-Raman measurements.

  20. Unsymmetrical squaraines for nonlinear optical materials

    Science.gov (United States)

    Marder, Seth R. (Inventor); Chen, Chin-Ti (Inventor); Cheng, Lap-Tak (Inventor)

    1996-01-01

    Compositions for use in non-linear optical devices. The compositions have first molecular electronic hyperpolarizability (.beta.) either positive or negative in sign and therefore display second order non-linear optical properties when incorporated into non-linear optical devices.

  1. Nano-crystalline FeOOH mixed with SWNT matrix as a superior anode material for lithium batteries

    Institute of Scientific and Technical Information of China (English)

    Mingzhong Zou; Weiwei Wen; Jiaxin Li; Yingbin Lin; Heng Lai; Zhigao Huang

    2014-01-01

    Nano-crystalline FeOOH particles (5∼10 nm) have been uniformly mixed with electric matrix of single-walled carbon nanotubes (SWNTs) for forming FeOOH/SWNT composite via a facile ultrasonication method. Directly using the FeOOH/SWNT composite (containing 15 wt%SWNTs) as anode material for lithium battery enhances kinetics of the Li+ insertion/extraction processes, thereby effectively improving re-versible capacity and cycle performance, which delivers a high reversible capacity of 758 mAh·g-1 under a current density of 400 mA·g-1 even after 180 cycles, being comparable with previous reports in terms of electrochemical performance for FeOOH anode. The good electrochemical performance should be ascribed to the small particle size and nano-crystalline of FeOOH, as well as the good electronic conductivity of SWNT matrix.

  2. A Strategy for the Development of Macromolecular Nonlinear Optical Materials

    Science.gov (United States)

    1990-01-01

    obsolete. SECURITY CLASSIFICATION OF THIS PAGE STRATEGY FOR THE DEVELOPMENT OF MACROMOLECULAR NONLINEAR OPTICAL MATERIALS Braja K. Mandala , Jan-Chan...materials is significantly different from the conventional inorganic NLO materials. The extent of second order (quadratic) NLO effect such as second...is a criterion of paramount importance for a large second order electro-optic effect in organic materials 8 ,9 . The most common approach to obtain

  3. Mid-infrared ultra-high-Q resonators based on fluoride crystalline materials

    Science.gov (United States)

    Lecaplain, C.; Javerzac-Galy, C.; Gorodetsky, M. L.; Kippenberg, T. J.

    2016-11-01

    The unavailability of highly transparent materials in the mid-infrared has been the main limitation in the development of ultra-sensitive molecular sensors or cavity-based spectroscopy applications. Whispering gallery mode microresonators have attained ultra-high-quality (Q) factor resonances in the near-infrared and visible. Here we report ultra-high Q factors in the mid-infrared using polished alkaline earth metal fluoride crystals. Using an uncoated chalcogenide tapered fibre as a high-ideality coupler in the mid-infrared, we study via cavity ringdown technique the losses of BaF2, CaF2, MgF2 and SrF2 microresonators. We show that MgF2 is limited by multiphonon absorption by studying the temperature dependence of the Q factor. In contrast, in SrF2 and BaF2 the lower multiphonon absorption leads to ultra-high Q factors at 4.5 μm. These values correspond to an optical finesse of , the highest value achieved for any type of mid-infrared resonator to date.

  4. Characterization and Optical Properties of the Single Crystalline SnS Nanowire Arrays

    Directory of Open Access Journals (Sweden)

    Yue GH

    2009-01-01

    Full Text Available Abstract The SnS nanowire arrays have been successfully synthesized by the template-assisted pulsed electrochemical deposition in the porous anodized aluminum oxide template. The investigation results showed that the as-synthesized nanowires are single crystalline structures and they have a highly preferential orientation. The ordered SnS nanowire arrays are uniform with a diameter of 50 nm and a length up to several tens of micrometers. The synthesized SnS nanowires exhibit strong absorption in visible and near-infrared spectral region and the direct energy gapE gof SnS nanowires is 1.59 eV.

  5. Non-linear optical functions of crystalline-Si resulting from nanoscale layered systems

    Energy Technology Data Exchange (ETDEWEB)

    Kuznicki, Z.T. [Laboratoire PHASE, CNRS UPR 292, 23 rue du Loess, F-67037 Strasbourg cedex 2 (France)]. E-mail: kuznicki@phase.c-strasbourg.fr; Ley, M. [Laboratoire PHASE, CNRS UPR 292, 23 rue du Loess, F-67037 Strasbourg cedex 2 (France); Lezec, H.J. [ISIS, ULP, 8 allee Gaspard Monge, F-67083 Strasbourg cedex (France); Sarrabayrouse, G. [LAAS-CNRS, 7 av. du colonel Roche, 31077 Toulouse cedex 4 (France); Rousset, B. [LAAS-CNRS, 7 av. du colonel Roche, 31077 Toulouse cedex 4 (France); Rossel, F. [LAAS-CNRS, 7 av. du colonel Roche, 31077 Toulouse cedex 4 (France); Migeon, H. [LAM, Centre de Recherche Public - Gabriel Lippmann, 162a, av. de la Faiaencerie, L-1511 Luxembourg (Luxembourg); Wirtz, T. [LAM, Centre de Recherche Public - Gabriel Lippmann, 162a, av. de la Faiaencerie, L-1511 Luxembourg (Luxembourg)

    2006-07-15

    New non-linear optoelectronic and photovoltaic behavior of crystalline silicon (c-Si) has been obtained with a strained nanoscale Si-layered system. We have found c-Si absorptances that even exceed values of amorphous silicon (a-Si) thin films. The present investigation exploits charge carrier and photon flux transformations at the so-called carrier collection limit. A correlation between free carrier density and the absorption coefficient could be established by combining reflectivity and transmissivity measurements on samples having different surface free carrier reservoirs. In summary, Si modifications implemented on the nanoscale lead to new effects that can widen applications of conventional Si devices.

  6. Optical coatings material aspects in theory and practice

    CERN Document Server

    Stenzel, Olaf

    2014-01-01

    Optical coatings, i.e. multilayer stacks composed from a certain number of thin individual layers, are an essential part of any optical system necessary to tailor the properties of the optical surfaces. Hereby, the performance of any optical coating is defined by a well-balanced interplay between the properties of the individual coating materials and the geometrical parameters (such as film thickness) which define their arrangement. In all scientific books dealing with the performance of optical coatings, the main focus is on optimizing the geometrical coating parameters, particularly the number of individual layers and their thickness. At the same time, much less attention is paid to another degree of freedom in coating design, namely the possibility to tailor optical material properties to an optimum relevant for the required specification. This book, on the contrary, concentrates on the material aside of the problem. After a comprehensive review of the basics of thin film theory, traditional optical coatin...

  7. Systems, Devices, and Materials for Digital Optical Processing.

    Science.gov (United States)

    Title, Mark Alan

    The massive parallelism and flexibility of three -dimensional optical communication may allow the development of new parallel computers free from the constraints of planar electronic technology. To bring the optical computer from possibility to reality, however, requires technological and scientific development in new optical systems, devices, and materials. We present here research results in each of these areas. First described is a prototype optical information processing system using CdS/liquid crystal spatial light modulators for optical logic and memory. This system has been developed as the first step in the implementation of a fine-grained, globally-interconnected optical processing element array. Notable system features include the implementation of programmable electronic control and the analysis of the optical power distribution within the processor, both directly applicable to the design of new and more advanced optical information processing systems. Next presented is the design and initial performance data for a new spatial light modulator combining an array of silicon phototransistors with the electro-optic material (Pb,La)(Zr,Ti)O _3, opening new possibilities for "intelligent" optical logic, memory, and switching devices. Important to the optimal performance of this Si/PLZT device is the fabrication of embedded electrodes in the electro-optic material, reducing the device operating voltage and switching energy while improving the uniformity of the optical modulation. An extensive computer model of embedded electrode performance and details of the electrode fabrication by reactive ion beam etching and electroless Ni deposition are presented. Finally, in the area of optical materials development we present initial results in the RF magnetron deposition of electro -optic PLZT on r-plane sapphire. This work is important to the fabrication of a monolithic, Si/PLZT-on-sapphire spatial light modulator, promising superior performance to devices using

  8. The Optical Properties of Crystalline Zn3Nb2O8 Nanomaterials Obtained by Hydrothermal Method

    Directory of Open Access Journals (Sweden)

    Mihaela Birdeanu

    2015-01-01

    Full Text Available The present study is focused on the obtaining of the Zn3Nb2O8 nanomaterial using the hydrothermal method and its characterization through different techniques. X-ray diffraction at room temperature revealed that a novel crystalline form of the nanomaterial forms at 1100°C belonging to monoclinic space group C2/c. Field-emission scanning electron microscopy evidenced the columnar morphology of the particle’s agglomeration and the high resolution electron transmission microscopy confirms the measured interplanar distances calculated from the X-ray diffraction experiments. Using the UV-VIS spectrum and Kubelka-Munk equations, the absorbance and the band gap for the Zn3Nb2O8 nanomaterial were calculated. PL spectrum reveals a single peak at 465 nm corresponding to the blue color fluorescence. The novel crystalline nanomaterial might find applications in fluorescence covering of technical devices, due to its capacity to preserve blue fluorescence both in acrylic based paint and after embedding in isopropyl alcohol.

  9. NIF Optical Materials and Fabrication Technologies: An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, J H; Hawley-Fedder, R; Stolz, C J; Menapace, J A; Borden, M R; Whitman, P; Yu, J; Runkel, M; Riley, M; Feit, M; Hackel, R

    2004-02-23

    The high-energy/high-power section of the NIF laser system contains 7360 meter-scale optics. Advanced optical materials and fabrication technologies needed to manufacture the NIF optics have been developed and put into production at key vendor sites. Production rates are up to 20 times faster and per-optic costs 5 times lower than could be achieved prior to the NIF. In addition, the optics manufactured for NIF are better than specification giving laser performance better than the design. A suite of custom metrology tools have been designed, built and installed at the vendor sites to verify compliance with NIF optical specifications. A brief description of the NIF optical wavefront specifications for the glass and crystal optics is presented. The wavefront specifications span a continuous range of spatial scale-lengths from 10 {micro}m to 0.5 m (full aperture). We have continued our multi-year research effort to improve the lifetime (i.e. damage resistance) of bulk optical materials, finished optical surfaces and multi-layer dielectric coatings. New methods for post-processing the completed optic to improve the damage resistance have been developed and made operational. This includes laser conditioning of coatings, glass surfaces and bulk KDP and DKDP and well as raster and full aperture defect mapping systems. Research on damage mechanisms continues to drive the development of even better optical materials.

  10. NIF optical materials and fabrication technologies: an overview

    Science.gov (United States)

    Campbell, John H.; Hawley-Fedder, Ruth A.; Stolz, Christopher J.; Menapace, Joseph A.; Borden, Michael R.; Whitman, Pamela K.; Yu, June; Runkel, Michael J.; Riley, Michael O.; Feit, Michael D.; Hackel, Richard P.

    2004-05-01

    The high-energy/high-power section of the NIF laser system contains 7360 meter-scale optics. Advanced optical materials and fabrication technologies needed to manufacture the NIF optics have been developed and put into production at key vendor sites. Production rates are up to 20 times faster and per-optic costs 5 times lower than could be achieved prior to the NIF. In addition, the optics manufactured for NIF are better than specification giving laser performance better than the design. A suite of custom metrology tools have been designed, built and installed at the vendor sites to verify compliance with NIF optical specifications. A brief description of the NIF optical wavefront specifications for the glass and crystal optics is presented. The wavefront specifications span a continuous range of spatial scale-lengths from 10 μm to 0.5 m (full aperture). We have continued our multi-year research effort to improve the lifetime (i.e. damage resistance) of bulk optical materials, finished optical surfaces and multi-layer dielectric coatings. New methods for post-processing the completed optic to improve the damage resistance have been developed and made operational. This includes laser conditioning of coatings, glass surfaces and bulk KDP and DKDP and well as raster and full aperture defect mapping systems. Research on damage mechanisms continues to drive the development of even better optical materials.

  11. Optical Spectroscopy of Nano Materials and Structures

    Science.gov (United States)

    Guo, Wenhao

    In this thesis, nanostructures and nanomaterials ranging from 3D to OD will be studied compresively, by using optical methods. Firstly, for 3D and 2D nanomaterials, nanoporous zeolite crystals, such as AFI and AEL are introduced as host materials to accommodate diatomic iodine molecules. Polarized Raman spectroscopy is utilized to identify the two configurations of iodine molecules to stay in the channels of AEL: the lying mode (the bond of the two atoms is parallel to the direction of the channels) and the standing mode (the bond is perpendicular to the direction of the channels). The lying mode and standing mode are switchable and can be well controlled by the amount of water molecules inside the crystal, revealed by both molecule dynamics simulation and experiment observation. With more water molecules inside, iodine molecules choose to stay in the standing mode, while with less water molecules, iodine molecules prefer to lie along the channel. Therefore, the configurations of molecules could be precisely controlled, globally by the surrounding pressure and temperature, and locally by the laser light. Ii is believed that this easy and reversible control of single molecule will be valuable in nanostructured devices, such as molecular sieving or molecular detection. Secondly, for 1D case, the PL spectrum of ZnO nanowire under uniaxial strain is studied. When a ZnO nanowire is bent, besides the lattice constant induced bandgap change on the tensile and compressive sides, there is a piezoelectric field generated along the cross section. This piezoelectric potential, together with the bandgap changes induced by the deformation, will redistribute the electrons excited by incident photons from valence band to conduction band. As a result, the electrons occupying the states at the tensile side will largely outnumbered the ones at the compressive side. Therefore, the PL spectrum we collected at the whole cross section will manifest a redshift, other than the peak

  12. Scientific Applications of Optical Instruments to Materials Research

    Science.gov (United States)

    Witherow, William K.

    1997-01-01

    Microgravity is a unique environment for materials and biotechnology processing. Microgravity minimizes or eliminates some of the effects that occur in one g. This can lead to the production of new materials or crystal structures. It is important to understand the processes that create these new materials. Thus, experiments are designed so that optical data collection can take place during the formation of the material. This presentation will discuss scientific application of optical instruments at MSFC. These instruments include a near-field scanning optical microscope, a miniaturized holographic system, and a phase-shifting interferometer.

  13. Scientific Applications of Optical Instruments to Materials Research

    Science.gov (United States)

    Witherow, William K.

    1997-01-01

    Microgravity is a unique environment for materials and biotechnology processing. Microgravity minimizes or eliminates some of the effects that occur in one g. This can lead to the production of new materials or crystal structures. It is important to understand the processes that create these new materials. Thus, experiments are designed so that optical data collection can take place during the formation of the material. This presentation will discuss scientific application of optical instruments at MSFC. These instruments include a near-field scanning optical microscope, a miniaturized holographic system, and a phase-shifting interferometer.

  14. The influence of metal interlayers on the structural and optical properties of nano-crystalline TiO 2 films

    KAUST Repository

    Yang, Yong

    2012-03-01

    TiO 2-M-TiO 2 (M = W, Co and Ag) multilayer films have been deposited on glass substrates using reactive magnetron sputtering, then annealed in air for 2 h at 500°C. The structure, surface morphology and optical properties of the films have been studied using X-ray diffraction, Raman spectroscopy, atomic force microscopy and UV-vis spectroscopy. The TiO 2-W-TiO 2 and TiO 2-Co-TiO 2 films showed crystalline phases, whereas the TiO 2-Ag-TiO 2 films remained in the amorphous state. The crystallization temperature for the TiO 2-M-TiO 2 films decreased significantly compared with pure TiO 2 film deposited on quartz. Detailed analysis of the Raman spectra suggested that the crystallization of TiO 2-M-TiO 2 films was associated with the large structural deformation imposed by the oxidation of intermediate metal layers. Moreover, the optical band gap of the films narrowed due to the appearance of impurity levels as the metal ions migrated into the TiO 2 matrix. These results indicate that the insertion of intermediate metal layers provides a feasible access to improve the structural and optical properties of anatase TiO 2 films, leading to promising applications in the field of photocatalysis. © 2011 Elsevier B.V. All rights reserved.

  15. Optical and electrical properties of spray pyrolysis deposited nano-crystalline BiFeO3 films

    Directory of Open Access Journals (Sweden)

    Annapu Reddy Venkateswarlu

    2011-12-01

    Full Text Available The nano-crystalline BiFeO3 were prepared under controlled substrate temperature by spray pyrolysis method. Their structural, optical and electrical properties were studied and correlated. A blueshift (Δλ ∼ 8.17 nm in the absorbance peaks was observed in the films with decrease in grain size. The absorption coefficient spectra show defect transitions at 1.9 and 2.3 eV in large grain size films due to oxygen vacancies. The lowest leakage was observed in smaller grain size (< 20 nm films due to negligible oxygen vacancies, smooth surface roughness and large energy bang gap. The Poole-Frankel conduction mechanism has been found to be the predominant mechanism for the leakage current.

  16. Crystalline structure and optical properties of GaS-CdS nanocomposite

    Energy Technology Data Exchange (ETDEWEB)

    Caraman, Iuliana; Stamate, Marius [Engineering Department, ' ' Vasile Alecsandri' ' University of Bacau, Bacau (Romania); Vatavu, Elmira; Untila, Dumitru [Faculty of Physics and Engineering, Moldova State University, Chisinau (Moldova, Republic of); Leontie, Liviu [Faculty of Physics, ' ' Alexandru Ioan Cuza' ' University of Iasi (Romania)

    2015-01-01

    The GaS-CdS composite has been obtained by intercalation of Cd in GaS single crystalline plates. The XRD analysis show that peaks determined by CdS and CdGa{sub 2}S{sub 4} are found along with GaS characteristic reflection in intercalated samples. The spectral dependence of absorption coefficient for the GaS-CdS composite is determined by both absorption mechanisms in GaS and in CdS components for α > 10{sup 3} cm{sup -1}. The photoluminescence spectrum (78 K) of the composite consists of radiative recombination bands characteristic for both CdS and GaS. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  17. Laser And Nonlinear Optical Materials For Laser Remote Sensing

    Science.gov (United States)

    Barnes, Norman P.

    2005-01-01

    NASA remote sensing missions involving laser systems and their economic impact are outlined. Potential remote sensing missions include: green house gasses, tropospheric winds, ozone, water vapor, and ice cap thickness. Systems to perform these measurements use lanthanide series lasers and nonlinear devices including second harmonic generators and parametric oscillators. Demands these missions place on the laser and nonlinear optical materials are discussed from a materials point of view. Methods of designing new laser and nonlinear optical materials to meet these demands are presented.

  18. NATO Advanced Study Institute on Engineering of Crystalline Materials Properties : State of the Art in Modeling Design and Applications. New Materials for better Defence and Security

    CERN Document Server

    Braga, Dario; Addadi, Lia

    2008-01-01

    This volume collects the lecture notes (ordered alphabetically according to the first author surname) of the talks delivered by the main speakers at the Erice 2007 International School of Crystallography, generously selected by NATO as an Advanced Study Institute (# 982582). The aim of the school was to discuss the state-of-the-art in molecular materials design, that is, the rational analysis and fabrication of crystalline solids showing a predefined structural organization of their component molecules and ions, which results in the manifestation of a specific collective property of technological interest. The School was held on June 7–17, 2007, in Erice (an old town, over 3000 years, located on the top of a Sicilian hill that oversees the sea near Trapani). The school developed following two parallel lines. First we established “where we are” in terms of modelling, design, synthesis and applications of crystalline solids with predefined properties. Second, we attempted to define current and possible fu...

  19. Azobenzene side-chain liquid crystalline polyesters with outstanding optical storage properties

    DEFF Research Database (Denmark)

    Hvilsted, Søren; Pedersen, M; Holme, NCR

    1998-01-01

    on azobenzene, iii- the methylene main-chain segment length, and iv-the polyester molecular mass, all influence the optical storage properties. A general synthetic route to novel mesogenic azobenzene diols comprising parameters i and ii is outlined. Polyesters with molecular masses (parameter iv) up to 100...

  20. Hexakis(4-iodophenyl)-peri-hexabenzocoronene- a versatile building block for highly ordered discotic liquid crystalline materials.

    Science.gov (United States)

    Wu, Jishan; Watson, Mark D; Zhang, Li; Wang, Zhaohui; Müllen, Klaus

    2004-01-14

    Hexakis (4-iodophenyl)-peri-hexabenzocoronene (5), a novel functionalizable mesogenic building block, was prepared by rational multistep synthesis. Although sparingly soluble in common solvents, it can be obtained in pure form and then functionalized via Hagihara-Sonogashira coupling to give a series of highly ordered columnar liquid crystalline molecules 14a-c. The total synthesis involves five 6-fold transformations, all in excellent to near quantitative isolated yields. Their thermotropic liquid crystalline behavior was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide-angle X-ray diffraction (WAXD). Compared to the normal alkyl-subsituted hexabenzocoronenes (HBCs), 14a-c exhibit more highly ordered columnar mesophases, including three-dimensionally ordered superstructures (helical columnar mesophase). These could arise from additional intracolumnar pi-pi interactions between, and space-filling requirements introduced by, the rigid-rod side groups. Atomic force microscopy (AFM) revealed self-assembled bundles of columnar aggregates in spin-coated films and isolated several-micron-long nanoribbons composed of a defined number of columns in drop cast films.

  1. Self-Assembly of Crystalline Structures of Magnetic Core-Shell Nanoparticles for Fabrication of Nanostructured Materials.

    Science.gov (United States)

    Xue, Xiaozheng; Wang, Jianchao; Furlani, Edward P

    2015-10-14

    A theoretical study is presented of the template-assisted formation of crystalline superstructures of magnetic-dielectric core-shell particles. The templates produce highly localized gradient fields and a corresponding magnetic force that guides the assembly with nanoscale precision in particle placement. The process is studied using two distinct and complementary computational models that predict the dynamics and energy of the particles, respectively. Both mono- and polydisperse colloids are studied, and the analysis demonstrates for the first time that although the particles self-assemble into ordered crystalline superstructures, the particle formation is not unique. There is a Brownian motion-induced degeneracy in the process wherein various distinct, energetically comparable crystalline structures can form for a given template geometry. The models predict the formation of hexagonal close packed (HCP) and face centered cubic (FCC) structures as well as mixed phase structures due to in-plane stacking disorders, which is consistent with experimental observations. The polydisperse particle structures are less uniform than the monodisperse particle structures because of the irregular packing of different-sized particles. A comparison of self-assembly using soft- and hard-magnetic templates is also presented, the former being magnetized in a uniform field. This analysis shows that soft-magnetic templates enable an order-of-magnitude more rapid assembly and much higher spatial resolution in particle placement than their hard-magnetic counterparts. The self-assembly method discussed is versatile and broadly applies to arbitrary template geometries and multilayered and multifunctional mono- and polydisperse core-shell particles that have at least one magnetic component. As such, the method holds potential for the bottom-up fabrication of functional nanostructured materials for a broad range of applications. This work provides unprecedented insight into the assembly

  2. On the use of crystalline admixtures in cement based construction materials: from porosity reducers to promoters of self healing

    Science.gov (United States)

    Ferrara, Liberato; Krelani, Visar; Moretti, Fabio

    2016-08-01

    The project detailed in this paper aims at a thorough characterization of the effects of crystalline admixtures, currently employed as porosity reducing admixtures, on the self-healing capacity of the cementitious composites, i.e. their capacity to completely or partially re-seal cracks and, in case, also exhibit recovery of mechanical properties. The problem has been investigated with reference to both a normal strength concrete (NSC) and a high performance fibre reinforced cementitious composite (HPFRCC). In the latter case, the influence of flow-induced fibre alignment has also been considered in the experimental investigation. With reference to either 3-point (for NSC) or 4-point (for HPFRCC) bending tests performed up to controlled crack opening and up to failure, respectively before and after exposure/conditioning recovery of stiffness and stress bearing capacity has been evaluated to assess the self-healing capacity. In a durability-based design framework, self-healing indices to quantify the recovery of mechanical properties will also be defined. In NSC, crystalline admixtures are able to promote up to 60% of crack sealing even under exposure to open air. In the case of HPFRCCs, which would already feature autogenous healing capacity because of their peculiar mix compositions, the synergy between the dispersed fibre reinforcement and the action of the crystalline admixture has resulted in a likely ‘chemical pre-stressing’ of the same reinforcement, from which the recovery of mechanical performance of the material has greatly benefited, up to levels even higher than the performance of the virgin un-cracked material.

  3. Overlapping illusions by transformation optics without any negative refraction material

    Science.gov (United States)

    Sun, Fei; He, Sailing

    2016-01-01

    A novel method to achieve an overlapping illusion without any negative refraction index material is introduced with the help of the optic-null medium (ONM) designed by an extremely stretching spatial transformation. Unlike the previous methods to achieve such an optical illusion by transformation optics (TO), our method can achieve a power combination and reshape the radiation pattern at the same time. Unlike the overlapping illusion with some negative refraction index material, our method is not sensitive to the loss of the materials. Other advantages over existing methods are discussed. Numerical simulations are given to verify the performance of the proposed devices.

  4. Atomic force and optical near-field microscopic investigations of polarization holographic gratings in a liquid crystalline azobenzene side-chain polyester

    DEFF Research Database (Denmark)

    Ramanujam, P.S.; Holme, N.C.R.; Hvilsted, S.

    1996-01-01

    Atomic force and scanning near-field optical microscopic investigations have been carried out on a polarization holographic grating recorded in an azobenzene side-chain Liquid crystalline polyester. It has been found that immediately following laser irradiation, a topographic surface grating...

  5. Crystalline perfection and optical properties of rapid grown KH2PO4 crystal with chromate additive

    Indian Academy of Sciences (India)

    Jianxu Ding; Bing Liu; Shenglai Wang; Xiaoming Mu; Shengjun Zhu; Guangxia Liu; Wenjie Liu; Yun Sun; Lin Liu; Duanliang Wang

    2013-10-01

    Potassium dihydrogen phosphate (KDP) crystals were grown in the presence of a series of chromate (CrO$^{2-}_{4}$) additive concentrations via rapid growth method. CrO$^{2-}_{4}$ made KDP crystals were coloured by yellowgreen, suggesting CrO$^{2-}_{4}$ had entered into the crystal lattice. The elemental analysis indicated that Cr element in KDP crystal was at ppm level. High resolution X-ray diffraction data revealed that the crystalline perfection of these as-grown KDP crystals was destroyed after CrO$^{2-}_{4}$ entered into crystal lattice, embedded in the full width at half maximum was broadened and satellite peaks appeared. Additionally, the extinction ratio was decreased with rise of CrO$^{2-}_{4}$ concentration. CrO$^{2-}_{4}$ introduced two absorption peaks centred at 360 and 280 nm and enhanced the intrinsic absorption near 220 nm, which were at the same band positions compared with the CrO$^{2-}_{4}$ or HCrO$^{-}_{4}$ transmittance spectra. Additionally, CrO$^{2-}_{4}$ could increase the size of light scattering, which was attributed to the point defects and microscopic defects by the replacement by CrO$^{2-}_{4}$ at PO$^{3-}_{4}$ position.

  6. Synthesis and characteristics of optical properties of crystalline YAl3(BO34:Cr,Ce

    Directory of Open Access Journals (Sweden)

    I. Cieślik

    2011-09-01

    Full Text Available Purpose: The purpose of this study is to explore the possibility of conrol the grain size of YAB nanopowder and to investigate the optimum amount of dopant cerium or chromium ions in the matrix of YAB for luminescent intensity.Design/methodology/approach: Nanocrystalline samples of YAB were prepared by sol-gel method and calcination at 1273 K. The structure and morphology of nanopowders were investigated by X-ray diffraction (XRD, scanning electron microscopy (SEM and aerodynamic aerosol aerodynamic methods. Fluorescent intensity was measured by Fourier transform infrared (FTIR and intersection of three-dimensional matrix (EM-EX methods.Findings: It was confirmed that the mean size of the obtained particles depended on the chain length of the precursor polimer used for reaction. The luminescence of YAB doped with cerium and chromium ions was measured.Research limitations/implications: The results can be used in order to further develop sol-gel technology to obtain pure and doped YAB nanopowder.Originality/value: Single phase crystalline YAB synthesis was developed. The measurements XRD confirmed that doping of YAB with some of RE or TM ions favours the formation of additional phase YBO3, having the orgonic structure.

  7. Optical analysis of the fine crystalline structure of artificial opal films.

    Science.gov (United States)

    Lozano, G; Dorado, L A; Schinca, D; Depine, R A; Míguez, H

    2009-11-17

    Herein, we present a detailed analysis of the structure of artificial opal films. We demonstrate that, rather than the generally assumed face centered cubic lattice of spheres, opal films are better approximated by rhombohedral assemblies of distorted colloids. Detailed analysis of the optical response in a very wide spectral range (0.4 < or = a/lambda < or = 2, where a is the conventional lattice constant), as well as at perpendicular and off-normal directions, unambiguously shows that the interparticle distance coincides very approximately with the expected diameter only along directions contained in the same close-packed plane but differs significantly in directions oblique to the [111] one. A full description of the real and reciprocal lattices of actual opal films is provided, as well as of the photonic band structure of the proposed arrangement. The implications of this distortion in the optical response of the lattice are discussed.

  8. Continuous rotation of a cholesteric liquid crystalline droplet by a circularly polarized optical tweezers

    Science.gov (United States)

    Tamura, Yuta; Kimura, Yasuyuki

    2017-04-01

    We studied the opto-mechanical response of droplets composed of cholesteric liquid crystal (ChLC) to a circularly polarized optical tweezers. Although the alignment of LC molecular within a droplet depends on the relative ratio of the droplet diameter d to the helical pitch p, the optically induced rotation was found to be asymmetric to the direction of circularly polarized light irrespective to the inner molecular alignment. We studied the rotation of the droplets with various sizes, helical pitch (strength of chirality) and different chirality. In the case of d/p 1, the direction of the rotation was simply determined by chirality of ChLC and the rotation was also observed for linearly polarized light, which has already been reported by Yang et al.

  9. Optically confined polarized resonance Raman studies in identifying crystalline orientation of sub-diffraction limited AlGaN nanostructure

    Energy Technology Data Exchange (ETDEWEB)

    Sivadasan, A. K., E-mail: sivankondazhy@gmail.com; Patsha, Avinash; Dhara, Sandip, E-mail: dhara@igcar.gov.in [Surface and Nanoscience Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India)

    2015-04-27

    An optical characterization tool of Raman spectroscopy with extremely weak scattering cross section tool is not popular to analyze scattered signal from a single nanostructure in the sub-diffraction regime. In this regard, plasmonic assisted characterization tools are only relevant in spectroscopic studies of nanoscale object in the sub-diffraction limit. We have reported polarized resonance Raman spectroscopic (RRS) studies with strong electron-phonon coupling to understand the crystalline orientation of a single AlGaN nanowire of diameter ∼100 nm. AlGaN nanowire is grown by chemical vapor deposition technique using the catalyst assisted vapor-liquid-solid process. The results are compared with the high resolution transmission electron microscopic analysis. As a matter of fact, optical confinement effect due to the dielectric contrast of nanowire with respect to that of surrounding media assisted with electron-phonon coupling of RRS is useful for the spectroscopic analysis in the sub-diffraction limit of 325 nm (λ/2N.A.) using an excitation wavelength (λ) of 325 nm and near ultraviolet 40× far field objective with a numerical aperture (N.A.) value of 0.50.

  10. Efficient Parallel Algorithm for Statistical Ion Track Simulations in Crystalline Materials

    CERN Document Server

    Jeon, Byoungseon

    2008-01-01

    We present an efficient parallel algorithm for statistical Molecular Dynamics simulations of ion tracks in solids. The method is based on the Rare Event Enhanced Domain following Molecular Dynamics (REED-MD) algorithm, which has been successfully applied to studies of, e.g., ion implantation into crystalline semiconductor wafers. We discuss the strategies for parallelizing the method, and we settle on a host-client type polling scheme in which a multiple of asynchronous processors are continuously fed to the host, which, in turn, distributes the resulting feed-back information to the clients. This real-time feed-back consists of, e.g., cumulative damage information or statistics updates necessary for the cloning in the rare event algorithm. We finally demonstrate the algorithm for radiation effects in a nuclear oxide fuel, and we show the balanced parallel approach with high parallel efficiency in multiple processor configurations.

  11. Single crystalline Co{sub 3}O{sub 4}: Synthesis and optical properties

    Energy Technology Data Exchange (ETDEWEB)

    Hosny, Nasser Mohammed, E-mail: Nasserh56@yahoo.com

    2014-04-01

    Crystals of Co{sub 3}O{sub 4} have been prepared from thermal decomposition of molecular precursors derived from salicylic acid and cobalt (II) acetate or chloride at 500 °C. A cubic phase Co{sub 3}O{sub 4} micro- and nanocrystals have been obtained. The as-synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The images of electron microscopes showed octahedral crystals of Co{sub 3}O{sub 4}. The volume and polarizability of the optimized structures of molecular precursors have been calculated and related to the particle size. The optical band gap of the obtained crystals has been measured. The results indicated two optical band gaps with values 2.65 and 2.95 eV for (E{sub g1}) (E{sub g2}), respectively. - Highlights: • Synthesis of Co{sub 3}O{sub 4} nanocrystals by decomposition of cobalt salicylic acid precursor. • Characterization of the isolated nanocrystals by using XRD, SEM and HRTEM. • The optical band gap has been measured.

  12. Synthesis of one-molecule-thick single-crystalline nanosheets of energetic material for high-sensitive force sensor.

    Science.gov (United States)

    Yang, Guangcheng; Hu, Hailong; Zhou, Yong; Hu, Yingjie; Huang, Hui; Nie, Fude; Shi, Weimei

    2012-01-01

    Energetic material is a reactive substance that contains a great amount of potential energy, which is extremely sensitive to external stimuli like force. In this work, one-molecule-thick single-crystalline nanosheets of energetic material were synthesized. Very small force applied on the nanosheet proves to lead to the rotation of the tilted nitro groups, and subsequently change of current of the nanosheet. We apply this principle to design high-sensitive force sensor. A theoretical model of force-current dependence was established based on the nanosheets' molecular packing structure model that was well supported with the high resolution XPS, AFM analysis results. An ultra-low-force with range of several picoNewton to several nanoNewton can be measured by determination of corresponding current value.

  13. Development of the road aggregate test specifications for the modified ethylene glycol durability index for basic crystalline materials

    CSIR Research Space (South Africa)

    Leyland, RC

    2013-09-01

    Full Text Available Author keywords: Ethylene glycol, basic crystalline materials, durability, base Journal of Materials in Civil Engineering. Submitted March 6, 2013; accepted September 18, 2013; posted ahead of print September 20, 2013. doi:10.1061/(ASCE)MT.1943...-5533.0000946 Copyright 2013 by the American Society of Civil Engineers J. Mater. Civ. Eng. D ow nl oa de d fro m a sc el ib ra ry .o rg b y A RI ZO N A ,U N IV ER SI TY O F on 1 0/ 02 /1 3. C op yr ig ht A SC E. F or p er so na l u se o nl y; a ll rig ht...

  14. Graphically Selecting Optical Material for Color Correction and Passive Athermalization

    OpenAIRE

    Raghad Ismail Ibrahim

    2016-01-01

    This paper presents pair optical glass by using a graphical method for selecting achromatize and athermalize an imaging lens. An athermal glass map that plots thermal glass constant versus inverse Abbe number is derived through analysis of optical glasses in visible light. By introducing the equivalent Abbe number and equivalent thermal glass constant, although it is a multi-lens system, we have a simple way to visually identify possible optical materials. ZEMAX will be used to de...

  15. OM85. Basic Properties of Optical Materials Summaries of Papers.

    Science.gov (United States)

    1985-05-01

    Optical Properties of Solids (Academic, New York, 1972) Ch.3. 7. D.B. Tanner, A.J...12, (1973). 6. T. Fleisch and R. Abermann, Thin Solid FilffF-42, 255-263 (1977). 7. F. Wooten, Optical Properties of Solids (Academic Press, New York...resolve cp structure. Such mea- surements are still lacking for many common semiconducting materials. REFERENCES 1. D.E. Aspnes, in Optical Properties of Solids :

  16. Tunable Optical Sources and Synthetic Nonlinear Media: Growth and Characterization of Nonlinear Optical Materials

    Science.gov (United States)

    1992-02-13

    niobate and absolute measurements of nonlinear optical coefficients of six different commonly used nonlinear optical materials. The refractometry data for...applied radiation and is now an established technology for Nd:YAG lasers. Optical parametric oscillation and amplification provide a method of generating...continuously tunable output -3- The relative advantages of nonlinear optical frequency conversion compared to other methods for the generation of near

  17. Spectroscopic properties of rare earths in optical materials

    CERN Document Server

    Parisi, Jürgen; Osgood, R; Warlimont, Hans; Liu, Guokui; Jacquier, Bernard

    2005-01-01

    Aimed at researchers and graduate students, this book provides up-to-date information for understanding electronic interactions that impact the optical properties of rare earth ions in solids. Its goal is to establish a connection between fundamental principles and the materials properties of rare-earth activated luminescent and laser optical materials. The theoretical survey and introduction to spectroscopic properties include electronic energy level structure, intensities of optical transitions, ion-phonon interactions, line broadening, and energy transfer and up-conversion. An important aspect of the book lies in its deep and detailed discussions on materials properties and the potential of new applications such as optical storage, information processing, nanophotonics, and molecular probes that have been identified in recent experimental studies. This volume will be a valuable reference book on advanced topics of rare earth spectroscopy and materials science.

  18. New directions for ion beam processing of optical materials

    Energy Technology Data Exchange (ETDEWEB)

    White, C.W.; Budai, J.D.; Zhu, J.G.; Withrow, S.P. [Oak Ridge National Lab., TN (United States)

    1997-03-01

    Recent developments in the use of ion implantation to modify the properties of optical materials are summarized. The use of ion implantation to form nanocrystal and quantum dots is emphasized. (author)

  19. Phosphorus-based compounds for EUV multilayer optics materials

    NARCIS (Netherlands)

    Medvedev, V.V.; Yakshin, A.E.; Kruijs, van de R.W.E.; Bijkerk, F.

    2015-01-01

    We have evaluated the prospects of phosphorus-based compounds in extreme ultraviolet multilayer optics. Boron phosphide (BP) is suggested to be used as a spacer material in reflective multilayer optics operating just above the L-photoabsorption edge of P (λ ≈9.2 nm). Mo, Ag, Ru, Rh, and Pd were cons

  20. Perceptual qualities of optically mixed materials (extended abstract)

    NARCIS (Netherlands)

    Pont, S.C.; Van Doorn, A.J.; Te Pas, S.F.; Wijntjes, M.W.A.; Koenderink, J.J.

    2012-01-01

    We present a novel setup in which real objects made of two different materials can be mixed optically in a linearly weighted manner. We conducted a psychophysical experiment in which observers rated optical mixtures of the three combinations of glossy, matte, and velvety green birds. The observers r

  1. Optical correlators with fast updating speed using photorefractive semiconductor materials

    Science.gov (United States)

    Gheen, Gregory; Cheng, Li-Jen

    1988-01-01

    The performance of an updatable optical correlator which uses a photorefractive semiconductor to generate real-time matched filters is discussed. The application of compound semiconductors makes possible high-speed operation and low optical input intensities. The Bragg diffraction is considered, along with the speed and power characteristics of these materials. Experimental results on photorefractive GaAs are presented.

  2. Anchoring and electro-optical dynamics of thin liquid crystalline films in a polyimide cell: Experiment and theory

    Science.gov (United States)

    Lee, Lay Min; Kwon, Hye J.; Kang, Joo H.; Nuzzo, Ralph G.; Schweizer, Kenneth S.

    2006-07-01

    The surface-dependent anchoring and electro-optical (EO) dynamics of thin liquid crystalline films have been examined using Fourier transform infrared spectroscopy. A simple nematic liquid crystal, 4-n-pentyl-4'-cyanobiphenyl (5CB), is confined as 40, 50, and 390nm thick films in nanocavities defined by gold interdigitated electrode arrays (IDEAs) patterned on polyimide-coated zinc selenide (ZnSe) substrates [Noble et al., J. Am. Chem. Soc. 124, 15020 (2002)]. New strategies for controlling the anchoring interactions and EO dynamics are explored based on coating a ZnSe surface with an organic polyimide layer in order to both planarize the substrate and induce a planar alignment of the liquid crystalline film. The polyimide layer can be further treated so as to induce a strong alignment of the nematic director along a direction parallel to the electrode digits of the IDEA. Step-scan time-resolved spectroscopy measurements were made to determine the rate constants for the electric-field-induced orientation and thermal relaxation of the 5CB films. In an alternate set of experiments, uncoated ZnSe substrates were polished unidirectionally to produce a grooved surface presenting nanometer-scale corrugations. The dynamical rate constants measured for several nanoscale film thicknesses and equilibrium organizations of the director in these planar alignments show marked sensitivities. The orientation rates are found to vary strongly with both the magnitude of the applied potential and the initial anisotropy of the alignment of the director within the IDEA. The relaxation rates do not vary in this same way. The marked variations seen in EO dynamics can be accounted for by a simple coarse-grained dynamical model.

  3. Imaging of Crystalline and Amorphous Surface Regions Using Time-of-Flight Secondary-Ion Mass Spectrometry (ToF-SIMS): Application to Pharmaceutical Materials.

    Science.gov (United States)

    Iuraş, Andreea; Scurr, David J; Boissier, Catherine; Nicholas, Mark L; Roberts, Clive J; Alexander, Morgan R

    2016-04-01

    The structure of a material, in particular the extremes of crystalline and amorphous forms, significantly impacts material performance in numerous sectors such as semiconductors, energy storage, and pharmaceutical products, which are investigated in this paper. To characterize the spatial distribution for crystalline-amorphous forms at the uppermost molecular surface layer, we performed time-of-flight secondary-ion mass spectroscopy (ToF-SIMS) measurements for quench-cooled amorphous and recrystallized samples of the drugs indomethacin, felodipine, and acetaminophen. Polarized light microscopy was used to localize crystallinity induced in the samples under controlled conditions. Principal component analysis was used to identify the subtle changes in the ToF-SIMS spectra indicative of the amorphous and crystalline forms for each drug. The indicators of amorphous and crystalline surfaces were common in type across the three drugs, and could be explained in general terms of crystal packing and intermolecular bonding, leading to intramolecular bond scission in the formation of secondary ions. Less intramolecular scission occurred in the amorphous form, resulting in a greater intensity of molecular and dimer secondary ions. To test the generality of amorphous-crystalline differentiation using ToF-SIMS, a different recrystallization method was investigated where acetaminophen single crystals were recrystallized from supersaturated solutions. The findings indicated that the ability to assign the crystalline/amorphous state of the sample using ToF-SIMS was insensitive to the recrystallization method. This demonstrates that ToF-SIMS is capable of detecting and mapping ordered crystalline and disordered amorphous molecular materials forms at micron spatial resolution in the uppermost surface of a material.

  4. Molecular and crystal design of nonlinear optical organic materials

    Energy Technology Data Exchange (ETDEWEB)

    Suponitsky, Kirill Yu; Antipin, Mikhail Yu [A.N. Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences, Moscow (Russian Federation); Timofeeva, Tatiana V [Department of Chemistry, New Mexico Highlands University (United States)

    2006-06-30

    The results of theoretical and experimental studies on the second-order molecular and crystal nonlinear optical susceptibilities of organic and several classes of organoelement compounds are summarised. Modern methods used in these studies are briefly characterised, their advantages and drawbacks are outlined as regards their application to the systematic search for efficient nonlinear optical materials. Recent achievements and the main challenges in the field are thoroughly discussed and an optimum algorithm of the design of such materials is proposed.

  5. Laser Induced Damage in Optical Materials: 1980.

    Science.gov (United States)

    1981-10-01

    hypodermic needle . The cell has valves which permit purging or filling with gases other than air when necessary. The absolute absorption calibration of...Schmid The High Frequency Electron Scattering Rate and Drude Zener Theory in Compound Semiconductors...446 N. Judell, S.S. Mitra, A. Vaidyanathan and A.H. Guenther Theory of Nonlinear Beam Propagation in Optical Waveguides

  6. Optical Coherence Tomography for Material Characterization

    NARCIS (Netherlands)

    Liu, P.

    2014-01-01

    Optical coherence tomography (OCT) is a non-invasive, contactless and high resolution imaging method, which allows the reconstruction of two or three dimensional depth-resolved images in turbid media. In the past 20 years, OCT has been extensively developed in the field of biomedical diagnostics, wh

  7. Carbon nanotube-based functional materials for optical limiting.

    Science.gov (United States)

    Chen, Yu; Lin, Ying; Liu, Ying; Doyle, James; He, Nan; Zhuang, Xiaodong; Bai, Jinrui; Blau, Werner J

    2007-01-01

    Optical limiting is an important application of nonlinear optics, useful for the protection of human eyes, optical elements, and optical sensors from intense laser pulses. An optical limiter is such a device that strongly attenuates high intensity light and potentially damaging light such as focused laser beams, whilst allowing for the high transmission of ambient light. Optical limiting properties of carbon nanotube suspensions, solubilized carbon nanotubes, small molecules doped carbon nanotubes and polymer/carbon nanotube composites have been reviewed. The optical limiting responses of carbon nanotube suspensions are shown to be dominated by nonlinear scattering as a result of thermally induced solvent-bubble formation and sublimation of the nanotubes, while the solubilized carbon nanotubes optically limit through nonlinear absorption mechanism and exhibit significant solution-concentration-dependent optical limiting responses. In the former case the optical limiting results are independent of nanotube concentrations at the same linear transmittance as that of the solubilized systems. Many efforts have been invested into the research of polymer/carbon nanotube composites in an attempt to allow for the fabrication of films required for the use of nanotubes in a real optical limiting application. The higher carbon nanotube content samples block the incident light more effectively at higher incident energy densities or intensities. The optical limiting mechanism of these composite materials is quite complicated. Besides nonlinear scattering contribution to the optical limiting, there may also be other contributions e.g., nonlinear absorption, nonlinear refraction, electronic absorption and others to the optical limiting. Further improvements in the optical limiting efficiency of the composites and in the dispersion and alignment properties of carbon nanotubes in the polymer matrix could be realized by variation of both nanostructured guest and polymer host, and by

  8. Crystalline structure, and magnetic and magneto-optical properties of MnSbBi thin films

    CERN Document Server

    Kang, K

    2001-01-01

    the c-axis texture and the saturation magnetisation due to less segregation of the non-magnetic phase in the annealed films. Using a thin Sb seed layer in Mn/Sb/Bi// films also results in an increase in both the c-axis texture and the saturation magnetisation. Decreasing the layer thicknesses in Mn/Bi/Sb// films results in a decrease in the grain size. By depositing the Sb layer first in Pt/Mn/Sb// and Co/Mn/Sb// films, the perpendicular c-axis texture can be kept before and after annealing. Computer simulation was carried out to investigate the relationship between the crystal structure and the magnetic properties before and after annealing. Comparing optical and MO properties of annealed Mn/Sb/Bi// and Mn/Sb// films suggests a possible origin of the peaks in Kerr spectra caused by adding Bi. This thesis reports work carried out to investigate some aspects of the crystal structure, and magnetic and magneto-optical (MO) properties in thin films of the Mn-Sb system. Reports of interesting properties and the po...

  9. Crystalline boron nitride aerogels

    Science.gov (United States)

    Zettl, Alexander K.; Rousseas, Michael; Goldstein, Anna P.; Mickelson, William; Worsley, Marcus A.; Woo, Leta

    2017-04-04

    This disclosure provides methods and materials related to boron nitride aerogels. In one aspect, a material comprises an aerogel comprising boron nitride. The boron nitride has an ordered crystalline structure. The ordered crystalline structure may include atomic layers of hexagonal boron nitride lying on top of one another, with atoms contained in a first layer being superimposed on atoms contained in a second layer.

  10. Crystalline boron nitride aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Zettl, Alexander K.; Rousseas, Michael; Goldstein, Anna P.; Mickelson, William; Worsley, Marcus A.; Woo, Leta

    2017-04-04

    This disclosure provides methods and materials related to boron nitride aerogels. In one aspect, a material comprises an aerogel comprising boron nitride. The boron nitride has an ordered crystalline structure. The ordered crystalline structure may include atomic layers of hexagonal boron nitride lying on top of one another, with atoms contained in a first layer being superimposed on atoms contained in a second layer.

  11. Casimir Force Contrast Between Amorphous and Crystalline Phases of AIST

    NARCIS (Netherlands)

    Torrichelli, G.; Zwol, van P.J.; Shpak, O.; Palasantzas, G.; Svetovoy, V.B.; Binns, C.; Kooi, B.J.; Jost, P.; Wittig, M.

    2012-01-01

    Phase change materials (PCMs) can be rapidly and reversibly switched between the amorphous and crystalline state. The structural transformation is accompanied by a signifi cant change of optical and electronic properties rendering PCMs suitable for rewritable optical data storage and nonvolatile ele

  12. Effects of crystalline structures and surface functional groups on the adsorption of haloacetic acids by inorganic materials.

    Science.gov (United States)

    Punyapalakul, Patiparn; Soonglerdsongpha, Suwat; Kanlayaprasit, Chutima; Ngamcharussrivichai, Chawalit; Khaodhiar, Sutha

    2009-11-15

    The effects of the crystalline structure and surface functional groups of porous inorganic materials on the adsorption of dichloroacetic acid (DCAA) were evaluated by using hexagonal mesoporous silicates (HMS), two surface functional group (3-aminopropyltriethoxy- and 3-mercaptopropyl-) modified HMSs, faujasite Y zeolite and activated alumina as adsorbents, and compared with powdered activated carbon (PAC). Selective adsorption of HAA(5) group was studied by comparing single and multiple-solute solution, including effect of common electrolytes in tap water. Adsorption capacities were significantly affected by the crystalline structure. Hydrogen bonding is suggested to be the most important attractive force. Decreasing the pH lower than the pH(zpc) increased the DCAA adsorption capacities of these adsorbents due to electrostatic interaction and hydrogen bonding caused by protonation of the hydronium ion. Adsorption capacities of HAA(5) on HMS did not relate to molecular structure of HAA(5). Common electrolytes did not affect the adsorption capacities and selectivity of HMS for HAA5, while they affected those of PAC.

  13. An investigation into the doping and crystallinity of anodically fabricated titania nanotube arrays: Towards an efficient material for solar energy applications

    Science.gov (United States)

    Allam Abdel-Motalib, Nageh Khalaf

    The primary focus of this dissertation was to improve the properties of the anodically fabricated TiO2 nanotube arrays; notably its band gap and crystallinity while retaining its tubular structure unaffected. The underlying hypothesis was that controlling the crystallinity and band gap while retaining the tubular structure will result in an enormous enhancement of the photoconversion capability of the material. To this end, a direct one-step facile approach for the in-situ doping of TiO2 nanotube arrays during their electrochemical fabrication in both aqueous and non-aqueous electrolytes has been investigated. The effect of doping on the morphology, optical and photoelectrochemical properties of the fabricated nanotube arrays is discussed. In an effort to improve the crystallinity of the anodically fabricated TiO2 nanotube arrays while retaining the tubular morphology, novel processing routes have been investigated to fabricate crystalline TiO 2 nanotube array electrodes. For the sake of comparison, the nanotubes were annealed at high temperature using the conventionally used procedure. The samples were found to be stable up to temperatures around 580°C, however, higher temperatures resulted in crystallization of the titanium support which disturbed the nanotube architecture, causing it to partially and gradually collapse and densify. The maximum photoconversion efficiency for water splitting using 7 mum-TiO2 nanotube arrays electrodes annealed at 580°C was measured to be about 10% under UV illumination. We investigated the effect of subsequent low temperature crystallization step. Rapid infrared (IR) annealing was found to be an efficient technique for crystallizing the nanotube array films within a few minutes. The IR-annealed 7mum-nanotube array films showed significant photoconversion efficiencies (eta=13.13%) upon their use as photoanodes to photoelectrochemically split water under UV illumination. This was related, in part, to the reduction in the barrier

  14. Kramers-Kronig Relations in Optical Materials Research

    CERN Document Server

    Lucarini, Valerio; Saarinen, Jarkko J; Vartiainen, Erik M

    2005-01-01

    This is the first one-volume work to provide a thorough and comprehensive description of the physical background, rigorous theory and applications of Kramers-Kronig relations in the fields of linear and nonlinear optical spectroscopy. Currently, Kramers-Kronig relations have become basic tools in the investigation of the optical properties of materials. A brief presentation of the related data-retrieval technique, the maximum entropy method, is also given. The contents and style potentially make this a standard text for physicists, chemists and engineers interested in optical-materials research and development.

  15. Novel side-chain liquid crystalline polyester architecture for reversible optical storage

    DEFF Research Database (Denmark)

    Hvilsted, Søren; Andruzzi, Fulvio; Kulinna, Chrisian

    1995-01-01

    for the cyanoazobenzene mesogens calculated. FTIR is also utilized to follow the temperature-dependent erasure of the induced orientation. Optical storage properties of thin unoriented polyester films are examined through measurements of polarization anisotropy and holography. A resolution of over 5000 lines...... scanning calorimetry for the hexamethylene spacer architecture with different molecular masses. Using FTIR polarization spectroscopy, the segmental orientation in unoriented polyester films induced by argon ion laser irradiation has been followed and an irradiation-dependent order parameter....../mm and diffraction efficiencies of about 40% have been achieved. Lifetimes greater than 30 months for information stored have been obtained, even though the glass transition temperatures are about 20 degrees C. Complete erasure of the information can be obtained by heating the films to about 80 degrees C...

  16. Recombinant Reflectin-Based Optical Materials

    Science.gov (United States)

    2012-01-01

    1,1,1,3,3,3 hexafluoroiso- propanol (HFIP), the ionic liquid , 1-butyl-3-methylimidazo- lium chloride (BMIM), and SDS. SDS solubility suggested a...the combination of a Deuterium lamp and a Halogen lamp, providing a wave- length range of 400–1100 nm. The resolution of the spec- trometer was 1 nm...reflectin thin films was changed by dipping the sample in liquid .11 Here we present more quantitative characteriza- tion of optical responses of

  17. Multicapillary optics for materials science studies

    Energy Technology Data Exchange (ETDEWEB)

    Scardi, P.; Setti, S.; Leoni, M. [Trento Univ. (Italy). Dipt. di Ingegneria dei Materiali

    2000-07-01

    XRD patterns from a standard polycrystalline gold film, collected by a parallel beam goniometer equipped with a conventional cross-slits collimator were compared with those obtained by replacing the incident beam optics with a multicapillary collimator. Considerable improvements can be achieved by using the new optics: (a) a much higher fraction of the X-ray beam produced by a conventional sealed tube can be used to build the diffracted signal, provided that a sufficiently wide sample area is available for measurement (diameter > 1 mm); (b) the limited beam divergence ({approx}0.3 ) gives a good stability and precision, in terms of negligible systematic errors in peak position due to sample {psi}- and {omega}-tilting; (c) instrumental profiles are much narrower than those obtained by the conventional cross-slits collimator; (d) width and shape of the instrumental profile are almost unaffected by sample tilting. The considerable interest in this device is increased by considering that features (b), (c) and (d) were verified also for relatively low 2{theta} angles (30-40 ): this is of great importance for thin film studies, where most of the available information comes from low diffraction order profiles; in addition, the increased signal intensity greatly helps to reduce measurement time (or to improve statistics). Advantages and drawbacks of the new optics are described in this paper, together with some practical examples of use. (orig.)

  18. Synthesis, spectroscopy and catalysis of [Cr(acac)3] complexes grafted onto MCM-41 materials: formation of polyethylene nanofibres within mesoporous crystalline aluminosilicates

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Ramachandra Rao, R.; Bodart, P.; Debras, G.; Collart, O.; Voort, P. van der; Schoonheydt, R.A.; Vansant, E.F.

    2000-01-01

    Chromium acetyl acetonate [Cr(acac)3] complexes have been grafted onto the surface of two mesoporous crystalline materials; pure silica MCM-41 (SiMCM-41) and Al-containing silica MCM-41 with an Si:Al ratio of 27 (AlMCM-41). The materials were characterized with X-ray diffraction, N2 adsorption, ther

  19. Traditional and emerging materials for optical metasurfaces

    Directory of Open Access Journals (Sweden)

    Zhu Alexander Y.

    2017-03-01

    Full Text Available One of the most promising and vibrant research areas in nanotechnology has been the field of metasurfaces. These are two dimensional representations of metaatoms, or artificial interfaces designed to possess specialized electromagnetic properties which do not occur in nature, for specific applications. In this article, we present a brief review of metasurfaces from a materials perspective, and examine how the choice of different materials impact functionalities ranging from operating bandwidth to efficiencies. We place particular emphasis on emerging and non-traditional materials for metasurfaces such as high index dielectrics, topological insulators and digital metamaterials, and the potentially transformative role they could play in shaping further advances in the field.

  20. Advances in nonlinear optical materials and devices

    Science.gov (United States)

    Byer, Robert L.

    1991-01-01

    The recent progress in the application of nonlinear techniques to extend the frequency of laser sources has come from the joint progress in laser sources and in nonlinear materials. A brief summary of the progress in diode pumped solid state lasers is followed by an overview of progress in nonlinear frequency extension by harmonic generation and parametric processes. Improved nonlinear materials including bulk crystals, quasiphasematched interactions, guided wave devices, and quantum well intersubband studies are discussed with the idea of identifying areas of future progress in nonlinear materials and devices.

  1. Traditional and emerging materials for optical metasurfaces

    Science.gov (United States)

    Zhu, Alexander Y.; Kuznetsov, Arseniy I.; Luk'yanchuk, Boris; Engheta, Nader; Genevet, Patrice

    2017-03-01

    One of the most promising and vibrant research areas in nanotechnology has been the field of metasurfaces. These are two dimensional representations of metaatoms, or artificial interfaces designed to possess specialized electromagnetic properties which do not occur in nature, for specific applications. In this article, we present a brief review of metasurfaces from a materials perspective, and examine how the choice of different materials impact functionalities ranging from operating bandwidth to efficiencies. We place particular emphasis on emerging and non-traditional materials for metasurfaces such as high index dielectrics, topological insulators and digital metamaterials, and the potentially transformative role they could play in shaping further advances in the field.

  2. Cooperative enhancement of the nonlinear optical response in conjugated energetic materials: A TD-DFT study.

    Science.gov (United States)

    Sifain, Andrew E; Tadesse, Loza F; Bjorgaard, Josiah A; Chavez, David E; Prezhdo, Oleg V; Scharff, R Jason; Tretiak, Sergei

    2017-03-21

    Conjugated energetic molecules (CEMs) are a class of explosives with high nitrogen content that posses both enhanced safety and energetic performance properties and are ideal for direct optical initiation. As isolated molecules, they absorb within the range of conventional lasers. Crystalline CEMs are used in practice, however, and their properties can differ due to intermolecular interaction. Herein, time-dependent density functional theory was used to investigate one-photon absorption (OPA) and two-photon absorption (TPA) of monomers and dimers obtained from experimentally determined crystal structures of CEMs. OPA scales linearly with the number of chromophore units, while TPA scales nonlinearly, where a more than 3-fold enhancement in peak intensity, per chromophore unit, is calculated. Cooperative enhancement depends on electronic delocalization spanning both chromophore units. An increase in sensitivity to nonlinear laser initiation makes these materials suitable for practical use. This is the first study predicting a cooperative enhancement of the nonlinear optical response in energetic materials composed of relatively small molecules. The proposed model quantum chemistry is validated by comparison to crystal structure geometries and the optical absorption of these materials dissolved in solution.

  3. Optical Fibre Sensors Using Graphene-Based Materials: A Review

    Science.gov (United States)

    Hernaez, Miguel; Zamarreño, Carlos R.; Melendi-Espina, Sonia; Bird, Liam R.; Mayes, Andrew G.; Arregui, Francisco J.

    2017-01-01

    Graphene and its derivatives have become the most explored materials since Novoselov and Geim (Nobel Prize winners for Physics in 2010) achieved its isolation in 2004. The exceptional properties of graphene have attracted the attention of the scientific community from different research fields, generating high impact not only in scientific journals, but also in general-interest newspapers. Optical fibre sensing is one of the many fields that can benefit from the use of these new materials, combining the amazing morphological, chemical, optical and electrical features of graphene with the advantages that optical fibre offers over other sensing strategies. In this document, a review of the current state of the art for optical fibre sensors based on graphene materials is presented. PMID:28098825

  4. Optical Fibre Sensors Using Graphene-Based Materials: A Review

    Directory of Open Access Journals (Sweden)

    Miguel Hernaez

    2017-01-01

    Full Text Available Graphene and its derivatives have become the most explored materials since Novoselov and Geim (Nobel Prize winners for Physics in 2010 achieved its isolation in 2004. The exceptional properties of graphene have attracted the attention of the scientific community from different research fields, generating high impact not only in scientific journals, but also in general-interest newspapers. Optical fibre sensing is one of the many fields that can benefit from the use of these new materials, combining the amazing morphological, chemical, optical and electrical features of graphene with the advantages that optical fibre offers over other sensing strategies. In this document, a review of the current state of the art for optical fibre sensors based on graphene materials is presented.

  5. Photonic materials, structures and devices for Reststrahlen optics.

    Science.gov (United States)

    Feng, K; Streyer, W; Zhong, Y; Hoffman, A J; Wasserman, D

    2015-11-30

    We present a review of existing and potential next-generation far-infrared (20-60 μm) optical materials and devices. The far-infrared is currently one of the few remaining frontiers on the optical spectrum, a space underdeveloped and lacking in many of the optical and optoelectronic materials and devices taken for granted in other, more technologically mature wavelength ranges. The challenges associated with developing optical materials, structures, and devices at these wavelengths are in part a result of the strong phonon absorption in the Reststrahlen bands of III-V semiconductors that collectively span the far-infrared. More than just an underexplored spectral band, the far-IR may also be of potential importance for a range of sensing applications in astrochemistry, biology, and industrial and geological processes. Additionally, with a suitable far-IR optical infrastructure, it is conceivable that even more applications could emerge. In this review, we will present recent progress on far-infrared materials and phenomena such as phononic surface modes, engineered composite materials, and optoelectronic devices that have the potential to serve as the next generation of components in a far-infrared optical tool-kit.

  6. High Performance Nano-Crystalline Oxide Fuel Cell Materials. Defects, Structures, Interfaces, Transport, and Electrochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, Scott [Northwestern Univ., Evanston, IL (United States); Poeppelmeier, Ken [Northwestern Univ., Evanston, IL (United States); Mason, Tom [Northwestern Univ., Evanston, IL (United States); Marks, Lawrence [Northwestern Univ., Evanston, IL (United States); Voorhees, Peter [Northwestern Univ., Evanston, IL (United States)

    2016-09-07

    This project addresses fundamental materials challenges in solid oxide electrochemical cells, devices that have a broad range of important energy applications. Although nano-scale mixed ionically and electronically conducting (MIEC) materials provide an important opportunity to improve performance and reduce device operating temperature, durability issues threaten to limit their utility and have remained largely unexplored. Our work has focused on both (1) understanding the fundamental processes related to oxygen transport and surface-vapor reactions in nano-scale MIEC materials, and (2) determining and understanding the key factors that control their long-term stability. Furthermore, materials stability has been explored under the “extreme” conditions encountered in many solid oxide cell applications, i.e, very high or very low effective oxygen pressures, and high current density.

  7. Method of determining load in anisotropic non-crystalline materials using energy flux deviation

    Science.gov (United States)

    Prosser, William H. (Inventor); Kriz, Ronald D. (Inventor); Fitting, Dale W. (Inventor)

    1994-01-01

    An ultrasonic wave is applied to an anisotropic sample material in an initial direction and the intensity of the ultrasonic wave is measured on an opposite surface of the sample material by two adjacent receiving points located in an array of receiving points. A ratio is determined between the measured intensities of two adjacent receiving points, the ratio being indicative of an angle of flux deviation from the initial direction caused by an unknown applied load. This determined ratio is then compared to a plurality of ratios of a similarly tested, similar anisotropic reference material under a plurality of respective, known load conditions, whereby the load applied to the particular anisotropic sample material is determined. A related method is disclosed for determining the fiber orientation from known loads and a determined flux shift.

  8. Optical properties of active photonic materials

    OpenAIRE

    Zeng, Yong

    2007-01-01

    Because of the generation of polaritons, which are quasiparticles possessing the characteristics of both photonics and electronics, active photonic materials offer a possible solution to transfer electromagnetic energy below the diffraction limit and further increase the density of photonic integrated circuits. A theoretical investigation of these exciting materials is, therefore, very important for practical applications. Four different kinds of polaritons have been studied in this thesis, (...

  9. Optical Limiting Materials Based on Gold Nanoparticles

    Science.gov (United States)

    2014-04-30

    Murphy, University of Illinois at Urbana-Champaign (formerly University of South Carolina), Department of Chemistry Award Number: FA9550-09-1-0246...of the electromagnetic spectrum. 2. Functionalization of the surface of the gold nanoparticles with selected organic and inorganic materials, with...the thesis work of one Ph.D. student (Sean Sivapalan, Ph.D. in materials science and engineering, graduated in 2013, now employed at Intel

  10. Fast Atomic-Scale Chemical Imaging of Crystalline Materials and Dynamic Phase Transformations.

    Science.gov (United States)

    Lu, Ping; Yuan, Ren Liang; Ihlefeld, Jon F; Spoerke, Erik David; Pan, Wei; Zuo, Jian Min

    2016-04-13

    Atomic-scale phenomena fundamentally influence materials form and function that makes the ability to locally probe and study these processes critical to advancing our understanding and development of materials. Atomic-scale chemical imaging by scanning transmission electron microscopy (STEM) using energy-dispersive X-ray spectroscopy (EDS) is a powerful approach to investigate solid crystal structures. Inefficient X-ray emission and collection, however, require long acquisition times (typically hundreds of seconds), making the technique incompatible with electron-beam sensitive materials and study of dynamic material phenomena. Here we describe an atomic-scale STEM-EDS chemical imaging technique that decreases the acquisition time to as little as one second, a reduction of more than 100 times. We demonstrate this new approach using LaAlO3 single crystal and study dynamic phase transformation in beam-sensitive Li[Li0.2Ni0.2Mn0.6]O2 (LNMO) lithium ion battery cathode material. By capturing a series of time-lapsed chemical maps, we show for the first time clear atomic-scale evidence of preferred Ni-mobility in LNMO transformation, revealing new kinetic mechanisms. These examples highlight the potential of this approach toward temporal, atomic-scale mapping of crystal structure and chemistry for investigating dynamic material phenomena.

  11. Rational design of organic electro-optic materials

    CERN Document Server

    Dalton, L R

    2003-01-01

    Quantum mechanical calculations are used to optimize the molecular first hyperpolarizability of organic chromophores and statistical mechanical calculations are used to optimize the translation of molecular hyperpolarizability to macroscopic electro-optic activity (to values of greater than 100 pm V sup - sup 1 at telecommunications wavelengths). Macroscopic material architectures are implemented exploiting new concepts in nanoscale architectural engineering. Multi-chromophore-containing dendrimers and dendronized polymers not only permit optimization of electro-optic activity but also of auxiliary properties including optical loss (both absorption and scattering), thermal and photochemical stability and processability. New reactive ion etching and photolithographic techniques permit the fabrication of three-dimensional optical circuitry and the integration of that circuitry with semiconductor very-large-scale integration electronics and silica fibre optics. Electro-optic devices have been fabricated exploiti...

  12. 16th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Program, Extended Abstracts, and Papers

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B. L.

    2006-08-01

    The National Center for Photovoltaics sponsored the 16th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes held August 6-9, 2006 in Denver, Colorado. The workshop addressed the fundamental properties of PV-Si, new solar cell designs, and advanced solar cell processing techniques. It provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The Workshop Theme was: "Getting more (Watts) for Less ($i)". A combination of oral presentations by invited speakers, poster sessions, and discussion sessions reviewed recent advances in crystal growth, new cell structures, new processes and process characterization techniques, and cell fabrication approaches suitable for future manufacturing demands. The special sessions included: Feedstock Issues: Si Refining and Purification; Metal-impurity Engineering; Thin Film Si; and Diagnostic Techniques.

  13. Materials and integration schemes for above-IC integrated optics

    NARCIS (Netherlands)

    Schmitz, Jurriaan; Rangarajan, Balaji; Kovalgin, Alexey Yu

    2014-01-01

    A study is presented on silicon oxynitride material for waveguides and germanium-silicon alloys for p-i-n diodes. The materials are manufactured at low, CMOS-backend compatible temperatures, targeting the integration of optical functions on top of CMOS chips. Low-temperature germanium-silicon deposi

  14. Application of Novel Nonlinear Optical Materials to Optical Processing

    Science.gov (United States)

    Banerjee, Partha P.

    1999-01-01

    We describe wave mixing and interactions in nonlinear photorefractive polymers and disodium flourescein. Higher diffracted orders yielding forward phase conjugation can be generated in a two-wave mixing geometry in photorefractive polymers, and this higher order can be used for image edge enhancement and correlation. Four-wave mixing and phase conjugation is studied using nonlinear disodium floureschein, and the nature and properties of gratings written in this material are investigated.

  15. Optical properties of multilayer optics including negative index materials

    OpenAIRE

    Lequime, Michel; Gralak, Boris; guenneau, sebastien; Zerrad, Myriam; Amra, Claude

    2013-01-01

    Negative indices are revisited through the thin-film admittance formalism. Effective indices and phase delay associated with wave propagation through negative index layers are carefully defined and computational rules easily implementable in standard thin-film software are derived from this approach. This admittance formalism is then used to recover the main features of the perfect lens and to highlight the benefit of such negative index materials to improve the performances of quarter-wavele...

  16. Correlation between SnO{sub 2} nanocrystals and optical properties of Eu{sup 3+} ions in SiO{sub 2} matrix: Relation of crystallinity, composition, and photoluminescence

    Energy Technology Data Exchange (ETDEWEB)

    Thanh, Bui Quang [International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology (HUST), No.1 Dai Co Viet, Hanoi (Viet Nam); Ha, Ngo Ngoc, E-mail: hann@itims.edu.vn [International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology (HUST), No.1 Dai Co Viet, Hanoi (Viet Nam); Khiem, Tran Ngoc, E-mail: khiem@itims.edu.vn [International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology (HUST), No.1 Dai Co Viet, Hanoi (Viet Nam); Chien, Nguyen Duc [International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology (HUST), No.1 Dai Co Viet, Hanoi (Viet Nam); School of Engineering Physics (SEP), Hanoi University of Science and Technology (HUST), No.1 Dai Co Viet, Hanoi (Viet Nam)

    2015-07-15

    We report characteristics and optical properties of Eu{sup 3+}-doped SnO{sub 2} nanocrystals dispersed in SiO{sub 2} matrix. Samples are prepared by the sol–gel method. Crystallinity of SnO{sub 2} nanocrystals is examined by X-ray diffraction experiments. At annealing temperatures from 900 to 1200 °C, we observe the formation of single tetragonal rutile structure of SnO{sub 2} nanocrystals. Average sizes of SnO{sub 2} nanocrystals within 3–7 nm are estimated by Debye–Scherrer equation. Intense photoluminescent spectra of Eu{sup 3+} ions consist of a series of resolved emission bands within 570–645 nm, which are varied with different sample-preparation conditions. We show the efficient excitation process of Eu{sup 3+} ions through SnO{sub 2} nanocrystals in the materials. Microscopic structure of SnO{sub 2} nanoparticles and optical properties of Eu{sup 3+} ions are also presented and discussed. - Highlights: • Thin layers of Eu{sup 3+} doped SnO{sub 2} nanocrystals dispersed in SiO{sub 2} were prepared by sol-gel method and spin-coating process. • Formation of single-phase tetragonal rutile structure of SnO{sub 2} nanocrystals and highly efficient optical excitation of the Eu{sup 3+} dopants were exhibited. • Relations of the crystallinity and composition of SnO{sub 2} and optical properties of Eu{sup 3+} dopants were comprehensively investigated and presented. • Allocations of major optically-active Eu{sup 3+} ions in the materials were deduced from their emission bands.

  17. Numerical model for thermal parameters in optical materials

    Science.gov (United States)

    Sato, Yoichi; Taira, Takunori

    2016-04-01

    Thermal parameters of optical materials, such as thermal conductivity, thermal expansion, temperature coefficient of refractive index play a decisive role for the thermal design inside laser cavities. Therefore, numerical value of them with temperature dependence is quite important in order to develop the high intense laser oscillator in which optical materials generate excessive heat across mode volumes both of lasing output and optical pumping. We already proposed a novel model of thermal conductivity in various optical materials. Thermal conductivity is a product of isovolumic specific heat and thermal diffusivity, and independent modeling of these two figures should be required from the viewpoint of a clarification of physical meaning. Our numerical model for thermal conductivity requires one material parameter for specific heat and two parameters for thermal diffusivity in the calculation of each optical material. In this work we report thermal conductivities of various optical materials as Y3Al5O12 (YAG), YVO4 (YVO), GdVO4 (GVO), stoichiometric and congruent LiTaO3, synthetic quartz, YAG ceramics and Y2O3 ceramics. The dependence on Nd3+-doping in laser gain media in YAG, YVO and GVO is also studied. This dependence can be described by only additional three parameters. Temperature dependence of thermal expansion and temperature coefficient of refractive index for YAG, YVO, and GVO: these are also included in this work for convenience. We think our numerical model is quite useful for not only thermal analysis in laser cavities or optical waveguides but also the evaluation of physical properties in various transparent materials.

  18. A novel twisted nematic alignment and its effects on the electro-optical dynamics of nanoscale liquid crystalline films

    Science.gov (United States)

    Rauzan, Brittany; Lee, Lay Min; Nuzzo, Ralph

    2015-03-01

    Vibrational spectroscopic studies of a surface induced, twisted alignment of the nematic liquid crystal, 4-n-pentyl-4'-cyanobiphenyl (5CB) and its temperature-dependent electro-optical (EO) dynamics were studied near the crystalline-nematic and nematic-isotropic transition temperatures, and at a median temperature in the nematic phase. A 50 nm thick film of 5CB was confined in nanocavities defined by the dimensions of a gold interdigitated electrode array patterned on a unidirectionally polished ZnSe substrate. The film was assembled between two polished substrates bearing extended nanometer-scaled grooves that are oriented orthogonally to one another. The results show that with this anchoring scheme, the molecular director of the LC film undergoes a ninety-degree twist. Step-scan time resolved spectroscopy (TRS) measurements were made to determine the rate constants for the temperature-dependent EO dynamics of both the electric field-induced orientation and thermal relaxation processes of the LC film. The work rationalizes the impacts of organizational anisotropy and illustrates how it can be exploited as a design principle to effectively influence the electric field-induced dynamics of LC systems.

  19. Adaptation in the optical properties of the crystalline lens in the eyes of the Lessepsian migrant Siganus rivulatus.

    Science.gov (United States)

    Gagnon, Yakir L; Shashar, Nadav; Kröger, Ronald H H

    2011-08-15

    Vision is an important source of information for many animals. The crystalline lens plays a central role in the visual pathway and hence the ecology of fishes. In this study, we tested whether the different light regimes in the Mediterranean and Red Seas have an effect on the optical properties of the lenses in the rivulated rabbitfish, Siganus rivulatus. This species has migrated through the Suez Canal from the Red Sea and established a vital population in the Mediterranean Sea. Longitudinal spherical aberration curves and focal lengths of the fish lenses were measured by laser scans and compared between the two populations. In addition, rivulated rabbitfish from the Mediterranean Sea were exposed to colored light (yellow, green and blue) and unfiltered light for periods of 1 or 13 days to test for short-term adjustments. Lens focal length was significantly longer (3%) in the Rea Sea population. The shorter focal length of the Mediterranean population can be explained as an adaptation to the dimmer light environment, as this difference makes the Mediterranean eyes 5% more sensitive than the eyes of the Red Sea population. The difference may be due to genetic differences or, more likely, adaptive developmental plasticity. Short-term regulatory mechanisms do not seem to be involved.

  20. A novel nano-scale non-contact temperature measurement technique for crystalline materials.

    Science.gov (United States)

    Wu, Xiaowei; Hull, Robert

    2012-11-23

    A new high spatial resolution non-contact temperature measurement technique (thermal scanning electron microscopy, ThSEM) is demonstrated. It employs temperature dependent thermal diffuse scattering in electron backscatter diffraction (EBSD) in a scanning electron microscope (SEM). Unlike conventional scanning thermal microscopy, which uses contact probes, ThSEM is a non-contact method. In contrast to optical temperature mapping techniques, ThSEM does not have the spatial resolution limitation that arises from the optical wavelength and theoretically can reach a resolution of <10 nm. The hardware setup is very similar to the EBSD system in an SEM, which can make the integration of temperature mapping into an SEM relatively straightforward. Moreover, multiple signals or contrast mechanisms, such as temperature distributions, grain orientation maps, topographic images and elemental maps can be obtained from the same sample area depending on the specific SEM capability. This technique thus adds a new channel-the temperature signal-to the collection of existing SEM signals.

  1. Organic materials with nonlinear optical properties

    Science.gov (United States)

    Stupp, Samuel I.; Son, Sehwan; Lin, Hong-Cheu

    1995-01-01

    The present invention is directed to organic materials that have the ability to double or triple the frequency of light that is directed through the materials. Particularly, the present invention is directed to the compound 4-[4-(2R)-2-cyano-7-(4'-pentyloxy-4-biphenylcarbonyloxy)phenylheptylidene) phenylcarbonyloxy]benzaldehyde, which can double the frequency of light that is directed through the compound. The invention is also directed to the compound (12-hydroxy-5,7-dodecadiynyl) 4'-[(4'-pentyloxy-4-biphenyl)carbonyloxy]-4-biphenylcarboxylate, and its polymeric form. The polymeric form can triple the frequency of light directed through it.

  2. Technical Progress Report for "Optical and Electrical Properties of III-Nitrides and Related Materials"

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Hongxing

    2008-10-31

    Investigations have been conducted focused on the fundamental material properties of AIN and high AI-content AIGaN alloys and further developed MOCVD growth technologies for obtaining these materials with improved crystalline quality and conductivities.

  3. Optical properties of multilayer optics including negative index materials

    CERN Document Server

    Lequime, Michel; Guenneau, Sebastien; Zerrad, Myriam; Amra, Claude

    2013-01-01

    Negative indices are revisited through the thin-film admittance formalism. Effective indices and phase delay associated with wave propagation through negative index layers are carefully defined and computational rules easily implementable in standard thin-film software are derived from this approach. This admittance formalism is then used to recover the main features of the perfect lens and to highlight the benefit of such negative index materials to improve the performances of quarter-wavelength Bragg mirrors and Fabry-Perot band-pass filters.

  4. Progress in nano-electro optics characterization of nano-optical materials and optical near-field interactions

    CERN Document Server

    Ohtsu, Motoichi

    2005-01-01

    This volume focuses on the characterization of nano-optical materials and optical-near field interactions. It begins with the techniques for characterizing the magneto-optical Kerr effect and continues with methods to determine structural and optical properties in high-quality quantum wires with high spatial uniformity. Further topics include: near-field luminescence mapping in InGaN/GaN single quantum well structures in order to interpret the recombination mechanism in InGaN-based nano-structures; and theoretical treatment of the optical near field and optical near-field interactions, providing the basis for investigating the signal transport and associated dissipation in nano-optical devices. Taken as a whole, this overview will be a valuable resource for engineers and scientists working in the field of nano-electro-optics.

  5. Reconstruction of Single-Grain Orientation Distribution Functions for Crystalline Materials

    DEFF Research Database (Denmark)

    Hansen, Per Christian; Sørensen, Henning Osholm; Sükösd, Zsuzsanna;

    A fundamental imaging problem in microstructural analysis of metals is the reconstruction of local crystallographic orientations from X-ray diffraction measurements. This work deals with the computation of the 3D orientation distribution function for individual grains of the material in considera...

  6. Energy-selective neutron imaging with high spatial resolution and its impact on the study of crystalline-structured materials

    Science.gov (United States)

    Lehmann, E. H.; Peetermans, S.; Josic, L.; Leber, H.; van Swygenhoven, H.

    2014-01-01

    Crystalline-structured materials with preferentially large grains were investigated by means of energy-selective neutron imaging methods (transmission radiography and tomography) under the conditions of the best possible spatial resolution at the ICON facility, SINQ, and PSI. Because of the cold spectrum at that beam line, access to the Bragg diffraction features was possible even when the energy resolution of the used selector device was only 15%. Grains with a size below the detector resolution (approximately 25 μm) are not visible, and a quasi-homogeneous contrast variation is found when the neutron energy is varied.In the cases of welded stainless steel samples and rolled Al plates, we obtained structural information from a very short exposure of approximately 60 s. Tomographic examinations of these samples at suitable neutron energies qualitatively verified the radiographic findings by showing the same features in the bulk. Comparison to common electron backscatter diffraction (EBSD) investigations in selected regions of the samples provided a complete verification of the neutron-image data with respect to the grain size and the different grain orientations. The method of energy-selective neutron imaging provides an easy and straightforward approach for non-invasive material research that can be performed without any sample preparation if the most suitable neutron energy is chosen. Further studies will be necessary to extend the experimental data base to other materials with different crystal structures and grain sizes. A comparison to diffraction data will enhance the quantitative value of the investigations.

  7. Broadband optical characterization of material properties

    DEFF Research Database (Denmark)

    Nielsen, Otto Højager Attermann

    , as well as details of the absorption spectrum which relate to chemical composition. The thesis focuses on two production process from the food industry. The first process is from the dairy industry where discrimination between chemical and structural properties is of importance. To explore...... inspection system for spectrallyresolved Static Light Scattering (SLS). (II) Photon Time-of-Flight (PToF) spectroscopy, which is a state of the art technique for characterization of turbid media. (III) A new hyperspectral imaging system based on full-field illumination by diffuse laser light. This thesis...... the fermentation process. It has also been shown that the optical inspection methods sense changes to structural properties before any are detected by traditional mechanical rheology. Finally, the developed hyperspectral imaging system was used to quantify the content of astaxanthin in fish feed, and performed...

  8. Interaction of pulsed CO2 laser radiation with optical materials

    Science.gov (United States)

    Schmitt, Ruediger; Hugenschmidt, Manfred; Geiss, L.; Stechele, E.

    1995-03-01

    Pulsed high power CO2-laser irradiation can cause damage to optical materials. Some results obtained at ISL with a repetitively pulsed CO2-laser with pulse energies up to 24 J are presented in this paper. In production facilities with CO2-lasers, optics transmitting in the visible spectral range like glass or PMMA are used as protection windows against scattered light. These materials have small skin depths for electromagnetic waves at 10,6 micrometers , typically in the order of some micrometers , so the interaction takes place in thin surface layers. Under high power laser radiation the transparency of the optics is lowered. On the other hand infrared transmitting optics like KCl or ZnSe show a low intrinsic absorption for CO2-laser radiation. Theoretical estimations matching with the experimental observations showed, however, that strong heating occurs, if a thin layer of inhomogeneities, typically some micrometers thick, is included in the surrounding material with slightly higher absorption than the surrounding lowless material. Under these assumptions the thermally induced stress inside the materials can explain the experimentally observed mechanical damage. Besides these thermal damage effects mechanical momenta are transferred by pulsed laser radiation to the optics. Experimental results as obtained by a ballistic pendulum are reported.

  9. Integration of Magneto-Optical Materials for Novel Optical Devices & Magnetophotonic Crystals Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This work proposes to capitalize on our Phase I success in monolithically integrating magneto-optic and magnetic materials with semiconductor platforms in order to...

  10. Optical modulators with two-dimensional layered materials

    CERN Document Server

    Sun, Zhipei; Wang, Feng

    2016-01-01

    Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that two-dimensional layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this review, we cover the state-of-the-art of optical modulators based on two-dimensional layered materials including graphene, transition metal dichalcogenides and black phosphorus. We discuss recent advances employing hybrid structures, such as two-dimensional heterostructures, plasmonic structures, and silicon/fibre integrated structures. We also take a look at future perspectives and discuss the potential of yet relatively unexplored mechanisms such as magneto-optic and acousto-optic modulation.

  11. Resonant excitation of precursor molecules in improving the particle crystallinity, growth rate and optical limiting performance of carbon nano-onions

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Y; Zhou, Y S; Park, J B; Wang, H; He, X N; Lu, Y F [Department of Electrical Engineering, University of Nebraska-Lincoln, Lincoln, NE 68588-0511 (United States); Luo, H F; Jiang, L, E-mail: ylu2@unl.edu [Department of Mechanical and Automation Engineering, Beijing Institute of Technology, Beijing 10008 (China)

    2011-04-22

    A catalyst-free and highly efficient synthetic method for growing carbon nano-onions (CNOs) in open air has been developed through the laser resonant excitation of a precursor molecule, ethylene, in a combustion process. Highly concentric CNO particles with improved crystallinity were obtained at a laser wavelength of 10.532 {mu}m through the resonant excitation of the CH{sub 2} wagging mode of the ethylene molecules. A higher growth rate up to 2.1 g h{sup -1} was obtained, compared with that without a laser (1.3 g h{sup -1}). Formation of the CNOs with ordered graphitic shells is ascribed to the decomposition of polycyclic aromatic hydrocarbons (PAHs) into C{sub 2} species. The optical limiting performances of the CNOs grown by the combustion processes were investigated. CNOs grown at 10.532 {mu}m laser excitation demonstrated improved optical limiting properties due to the improved crystallinity.

  12. Comparison of induced damage, range, reflection, and sputtering yield between amorphous, bcc crystalline, and bubble-containing tungsten materials under hydrogen isotope and noble gas plasma irradiations

    Science.gov (United States)

    Saito, Seiki; Nakamura, Hiroaki; Tokitani, Masayuki

    2017-01-01

    Binary-collision-approximation simulation of hydrogen isotope (i.e., hydrogen, deuterium, and tritium) and noble gas (i.e., helium, neon, and argon) injections into tungsten materials is performed. Three tungsten structures (i.e., amorphous, bcc crystalline, and helium bubble-containing structures) are prepared as target materials. Then, the trajectories of incident atoms, the distribution of recoil atoms, the penetration depth range of incident atoms, the sputtering yield, and the reflection rate are carefully investigated for these target materials.

  13. Ionothermal synthesis--ionic liquids as functional solvents in the preparation of crystalline materials.

    Science.gov (United States)

    Morris, Russell E

    2009-06-07

    Ionothermal synthesis is the use of ionic liquids simultaneously as both the solvent and potential template or structure directing agent in the formation of solids. It directly parallels hydrothermal synthesis where the solvent is water. In this feature article I discuss the general features of ionothermal synthesis and how the properties of the synthesis differ from those of other synthetic methodologies. In particular, I will discuss the role of the ionic liquid anion in determining the structure of the synthesised solid, the role of mineralisers such as water and fluoride, and the targeted use of unstable ionic liquids to produce new inorganic and inorganic-organic hybrid materials.

  14. Forecast of Piezoelectric Properties of Crystalline Materials from First Principle Calculation

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Piezo crystals including quartz, quartz-like crystals, known and novel crystals of langasite-type structure were treated with density-functional perturb theory (DFPT) using plane-wave pseudopotentials method, within the local density approximation (LDA) to the exchange-correlation functional. Compared with experimental results, the ab initio calculation results have quantitative or semi-quantitative accuracy. It is shown that first principle calculation opens a door to the search and design of new piezoelectric material. Further application of first principle calculation to forecast the whole piezoelectric properties was also discussed.

  15. Effect of sputtering power on crystallinity, intrinsic defects, and optical and electrical properties of Al-doped ZnO transparent conducting thin films for optoelectronic devices

    Science.gov (United States)

    Hu, Yu Min; Li, Jung Yu; Chen, Nai Yun; Chen, Chih Yu; Han, Tai Chun; Yu, Chin Chung

    2017-02-01

    The crystallinity and intrinsic defects of transparent conducting oxide (TCO) films have a high impact on their optical and electrical properties and therefore on the performance of devices incorporating such films, including flat panel displays, electro-optical devices, and solar cells. The optical and electrical properties of TCO films can be modified by tailoring their deposition parameters, which makes proper understanding of these parameters crucial. Magnetron sputtering is the most adaptable method for preparing TCO films used in industrial applications. In this study, we investigate the direct and inter-property correlation effects of sputtering power (PW) on the crystallinity, intrinsic defects, and optical and electrical properties of Al-doped ZnO (AZO) TCO films. All of the films were preferentially c-axis-oriented with a wurtzite structure and had an average transmittance of over 80% in the visible wavelength region. Scanning electron microscopy images revealed significantly increased AZO film grain sizes for PW ≥ 150 W, which may lead to increased conductivity, carrier concentration, and optical band gaps but decreased carrier mobility and in-plane compressive stress in AZO films. Photoluminescence results showed that, with increasing PW, the near band edge emission gradually dominates the defect-related emissions in which zinc interstitial (Zni), oxygen vacancy (VO), and oxygen interstitial (Oi) are possibly responsible for emissions at 3.08, 2.8, and 2.0 eV, respectively. The presence of Zni- and Oi-related emissions at PW ≥ 150 W indicates a slight increase in the presence of Al atoms substituted at Zn sites (AlZn). The presence of Oi at PW ≥ 150 W was also confirmed by X-ray photoelectron spectroscopy results. These results clearly show that the crystallinity and intrinsic-defect type of AZO films, which dominate their optical and electrical properties, may be controlled by PW. This understanding may facilitate the development of TCO

  16. 15th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Extended Abstracts and Papers

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B. L.

    2005-11-01

    The National Center for Photovoltaics sponsored the 15th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 7-10, 2005. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The workshop addressed the fundamental properties of PV silicon, new solar cell designs, and advanced solar cell processing techniques. A combination of oral presentations by invited speakers, poster sessions, and discussion sessions reviewed recent advances in crystal growth, new cell designs, new processes and process characterization techniques, and cell fabrication approaches suitable for future manufacturing demands. The theme of this year's meeting was 'Providing the Scientific Basis for Industrial Success.' Specific sessions during the workshop included: Advances in crystal growth and material issues; Impurities and defects in Si; Advanced processing; High-efficiency Si solar cells; Thin Si solar cells; and Cell design for efficiency and reliability module operation. The topic for the Rump Session was ''Si Feedstock: The Show Stopper'' and featured a panel discussion by representatives from various PV companies.

  17. Dirac Electrons in Two-Dimensional Hexagonal Crystalline Materials%二维六角晶体材料中的Dirac电子

    Institute of Scientific and Technical Information of China (English)

    翟学超; 戚凤华; 许亚芳; 周兴飞; 金国钧

    2015-01-01

    本文综述由碳、硅、硼氮和二硫化钼等单元素或双元素构成的二维六角晶体材料中Dirac电子的研究成果与最新进展。文章从引言开始,接着介绍这些二维六角晶体材料的空间结构和基本电子性质;然后探讨外场调控下这些材料在能谱和光吸收、量子输运、激子凝聚和热Josephson效应,以及拓扑量子相变等方面所表现出来的新奇的物理现象、简要的理论处理和可能的应用前景;最后给出二维六角晶体材料相关研究的总结和展望。谨以本文献给南京大学建立物理学科100周年。%We review here the research results and latest progress in studying Dirac electrons in two-dimensional hexagonal crystalline materials composed of single element or double elements like carbon, silicon, boron nitride and molybdenum disulfide. Following a short introduction, the pa-per discusses the spatial structures and elementary electronic properties of the two-dimensional hexagonal crystalline materials, and analyzes the novel physical phenomena, provides simple the-oretical treatments and shows possible applications in near future, involved in the energy spectra and optical absorption, quantum transport, exciton condensation and thermal Josephson effect, as well as topological quantum phase transitions under external fields;finally it gives a summary and perspective for the field. We would like to present this paper to the 100 anniversary of physical discipline in Nanjing University.

  18. Evidence of Excitonic Optical Tamm States using Molecular Materials

    CERN Document Server

    Núñez-Sánchez, S; Murshidy, M M; Abdel-Hady, A G; Serry, M Y; Adawi, A M; Rarity, J G; Oulton, R; Barnes, W L

    2015-01-01

    We report the first experimental observation of an Excitonic Optical Tamm State supported at the interface between a periodic multilayer dielectric structure and an organic dye-doped polymer layer. The existence of such states is enabled by the metal-like optical properties of the excitonic layer based on aggregated dye molecules. Experimentally determined dispersion curves, together with simulated data, including field profiles, allow us to identify the nature of these new modes. Our results demonstrate the potential of organic excitonic materials as a powerful means to control light at the nanoscale, offering the prospect of a new alternative type of nanophotonics based on molecular materials.

  19. Introducing Magneto-Optical Functions into Soft Materials

    Science.gov (United States)

    2017-05-03

    AFRL-AFOSR-JP-TR-2017-0036 Introducing Magneto-Optical Functions into Soft Materials Chia-Liang ’Charlie’ Cheng National Dong Hwa University No 1 Sec...COVERED (From - To) 28 Mar 2013 to 27 Mar 2016 4. TITLE AND SUBTITLE Introducing Magneto-Optical Functions into Soft Materials 5a.  CONTRACT NUMBER 5b...excited states by measuring the capacitance as a function of magnetic field without and with photoexcitation respectively. 2.1 -d electron coupling in

  20. Bremsstrahlung from relativistic bare heavy ions: Nuclear and electronic contributions in amorphous and crystalline materials

    DEFF Research Database (Denmark)

    Jensen, Tue Vissing; Sørensen, Allan Hvidkjær

    2013-01-01

    A charged particle emits bremsstrahlung while traversing matter. We calculate the radiation cross section for bare heavy ions penetrating amorphous materials and single crystals at highly relativistic energies. The main component originates in scattering of the virtual photons of screened target...... at a very low value. Incoherent interaction with single target electrons gives rise to two additional bremsstrahlung components, a modest component due to scattering of virtual photons of the electrons on the projectile and a strong low-energy component due to scattering of the virtual photons...... of the projectile on the electrons. The difference in radiation levels can be traced to the mass of the scatterer. Since target electrons are more widely distributed than nuclei in a crystal channel the variation of the electron component of the bremsstrahlung with incidence angle to a major crystallographic...

  1. Structural study and fluorescent property of a novel organic microporous crystalline material

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Zhao; Yang, Bingqin; Yang, Meipan; Zhang, Binglin, E-mail: yangbq@nwu.edu.cn [Key Laboratory of Synthetic and Natural Functional Molecule Chemistry of Ministry of Education, College of Chemistry and Materials Science, Northwest University (China)

    2014-01-15

    A novel microporous organic material [(2-{2-[2-(bis-methoxycarbonylmethylamino)phenoxy] ethoxy}-4-benzimidazole-phenyl)methoxycarbonylmethylamino]acetic acid methyl ester 6 was synthesized and characterized by single crystal X-ray diffraction, Fourier transform infrared spectroscopy (FT-IR), electron spray ionization-mass spectrometry (ESI-HRMS), X-ray powder diffraction (PXRD), {sup 1}H and {sup 13}C NMR. 6 crystallizes in the centrosymmetric monoclinic space group C2/c, with unit cell parameters a = 35.648(3) Å, b = 14.3240(12) Å, c = 15.3693(13) Å, a = 90.00, ß = 94.8190(10), γ = 90.00, V = 7820.16 Å{sup 3} and Z = 8 at 296(2) K. As indicated by crystal packing, the molecular conjugation planes arrange along the c axis to form micropores due to the hydrogen bonds. In addition, the fluorescent spectrum and luminescence lifetime were studied for 6. (author)

  2. Discotic liquid-crystalline materials based on porphycenes: a mesogenic metalloporphycene-tetracyanoquinodimethane (TCNQ) adduct.

    Science.gov (United States)

    Stepień, Marcin; Donnio, Bertrand; Sessler, Jonathan L

    2007-01-01

    A number of substituted zinc(II) porphycenes and porphyrins have been synthesized as potentially mesogenic materials. One of the resulting porphycenes, bearing eight decyloxy chains, exhibits two mesophases, a transient lamellar phase (Lam) and a highly ordered lamello-columnar phase (L(Col)), with remarkably different structural characteristics. The same zinc(II) porphycene also forms an electron donor-acceptor (EDA) complex with tetracyanoquinodimethane (TCNQ), generating a hexagonal columnar mesophase (Col(h)) that is thermally stable up to ca. 200 degrees C. The EDA interaction between porphycene and TCNQ has been probed using electronic and vibrational spectroscopy. A mixture of zinc(II) porphyrins, isomeric with the above porphycene complex, forms a rectangular columnar mesophase (Col(r)).

  3. A new micro scale FE model of crystalline materials in micro forming process

    Directory of Open Access Journals (Sweden)

    Luo Liang

    2016-01-01

    Full Text Available Micro forming of metals has drawn global attention due to the increasing requirement of micro metal products. However, the size effects become significant in micro forming processes and affect the application of finite element (FE simulation of micro forming processes. Dividing samples into small areas according to their microstructures and assigning individual properties to each small area are a possible access to micro forming simulation considering material size effects. In this study, a new model that includes both grains and their boundaries was developed based on the observed microstructures of samples. The divided subareas in the model have exact shapes and sizes with real crystals on the sample, and each grain and grain boundaries have their own properties. Moreover, two modelling methods using different information from the microstructural images were introduced in detail. The two modelling methods largely increase the availability of various microstructural images. The new model provides accurate results which present the size effects well.

  4. Structural and optical properties of In doped Se-Te phase-change thin films: A material for optical data storage

    Science.gov (United States)

    Pathak, H. P.; Shukla, Nitesh; Kumar, Vipin; Dwivedi, D. K.

    2016-02-01

    Se75-xTe25Inx (x = 0, 3, 6, & 9) bulk glasses were obtained by melt quench technique. Thin films of thickness 400 nm were prepared by thermal evaporation technique at a base pressure of 10-6 Torr onto well cleaned glass substrate. a-Se75-xTe25Inx thin films were annealed at different temperatures for 2 h. As prepared and annealed films were characterized by X-ray diffraction and UV-Vis spectroscopy. The X-ray diffraction results show that the as-prepared films are of amorphous nature while it shows some poly-crystalline structure in amorphous phases after annealing. The optical absorption spectra of these films were measured in the wavelength range 400-1100 nm in order to derive the extinction and absorption coefficient of these films. It was found that the mechanism of optical absorption follows the rule of allowed non-direct transition. The optical band gap of as prepared and annealed films as a function of photon energy has been studied. The optical band gap is found to decrease with increase in annealing temperature in the present glassy system. It happens due to crystallization of amorphous films. The decrease in optical band gap due to annealing is an interesting behavior for a material to be used in optical storage. The optical band gap has been observed to decrease with the increase of In content in Se-Te glassy system.

  5. Stable phantom materials for ultrasound and optical imaging

    Science.gov (United States)

    Cabrelli, Luciana C.; Pelissari, Pedro I. B. G. B.; Deana, Alessandro M.; Carneiro, Antonio A. O.; Pavan, Theo Z.

    2017-01-01

    Phantoms mimicking the specific properties of biological tissues are essential to fully characterize medical devices. Water-based materials are commonly used to manufacture phantoms for ultrasound and optical imaging techniques. However, these materials have disadvantages, such as easy degradation and low temporal stability. In this study, we propose an oil-based new tissue-mimicking material for ultrasound and optical imaging, with the advantage of presenting low temporal degradation. A styrene-ethylene/butylene-styrene (SEBS) copolymer in mineral oil samples was made varying the SEBS concentration between 5%-15%, and low-density polyethylene (LDPE) between 0%-9%. Acoustic properties, such as the speed of sound and the attenuation coefficient, were obtained using frequencies ranging from 1-10 MHz, and were consistent with that of soft tissues. These properties were controlled varying SEBS and LDPE concentration. To characterize the optical properties of the samples, the diffuse reflectance and transmittance were measured. Scattering and absorption coefficients ranging from 400 nm-1200 nm were calculated for each compound. SEBS gels are a translucent material presenting low optical absorption and scattering coefficients in the visible region of the spectrum, but the presence of LDPE increased the turbidity. Adding LDPE increased the absorption and scattering of the phantom materials. Ultrasound and photoacoustic images of a heterogeneous phantom made of LDPE/SEBS containing a spherical inclusion were obtained. Annatto dye was added to the inclusion to enhance the optical absorbance. The results suggest that copolymer gels are promising for ultrasound and optical imaging, making them also potentially useful for photoacoustic imaging.

  6. Synthesis of steel slag ceramics:chemical composition and crystalline phases of raw materials

    Institute of Scientific and Technical Information of China (English)

    Li-hua Zhao; Wei Wei; Hao Bai; Xu Zhang; Da-qiang Cang

    2015-01-01

    Two types of porcelain tiles with steel slag as the main raw material (steel slag ceramics) were synthesized based on the CaO–Al2O3–SiO2 and CaO–MgO–SiO2 systems, and their bending strengths up to 53.47 MPa and 99.84 MPa, respectively, were obtained. The presence of anorthite,α-quartz, magnetite, and pyroxene crystals (augite and diopside) in the steel slag ceramics were very different from the composition of traditional ceramics. X-ray diffraction (XRD) and electron probe X-ray microanalysis (EPMA) results illustrated that the addition of steel slag reduced the temperature of extensive liquid generation and further decreased the firing temperature. The considerable contents of glass-modifying oxide liquids with rather low viscosities at high temperature in the steel slag ceramic adobes promoted element diffusion and crystallization. The results of this study demonstrated a new approach for extensive and effective recycling of steel slag.

  7. Compaction of functionalized calcium carbonate, a porous and crystalline microparticulate material with a lamellar surface.

    Science.gov (United States)

    Stirnimann, Tanja; Atria, Susanna; Schoelkopf, Joachim; Gane, Patrick A C; Alles, Rainer; Huwyler, Jörg; Puchkov, Maxim

    2014-05-15

    In the present study, we aimed to characterize the compressibility and compactibility of the novel pharmaceutical excipient, functionalized calcium carbonate (FCC). We studied three FCC modifications and compared the values for compressibility and compactibility with mannitol, microcrystalline cellulose (MCC), and ground calcium carbonate (CC 330) as well as mixtures of paracetamol and MCC or FCC at drug loads of 0%, 25%, 50%, 75%, and 100% (w/w). We used Heckel analysis, modified Heckel analysis, and Leuenberger analysis to characterize the compaction and compression behavior of the mixtures. Compaction analysis of FCC showed this material to markedly differ from ground calcium carbonate, exhibiting properties, i.e. plastic deformability, similar to those of MCC. This effect was attributed to the highly lamellar structure of FCC particles whose thickness is of the order of a single crystal unit cell. According to Leuenberger parameters, we concluded that FCC-based tablet formulations had mechanical properties equal or superior to those formulated with MCC. FCC tablets with high tensile strength were obtained already at low compressive pressures. Owing to these favorable properties (i.e. marked tensile strength and porosity), FCC promises to be suitable for the preparation of solid dosage forms.

  8. Femtosecond index change mechanisms and morphology of SiC crystalline materials

    Energy Technology Data Exchange (ETDEWEB)

    DesAutels, Logan [Wright-Patterson AFB, Air Force Research Laboratory, Materials and Manufacturing Directorate, AT and T Government Solutions Inc., Dayton, OH 45433 (United States)], E-mail: ld@loganopticaldesign.com; Brewer, Christopher [Wright-Patterson AFB, Air Force Research Laboratory, Materials and Manufacturing Directorate, Dayton, OH 45424 (United States); Powers, Peter [Electro-Optics and Physics Departments, University of Dayton, Dayton, OH 45469 (United States); Walker, Mark [Wright-Patterson AFB, Air Force Research Laboratory, Materials and Manufacturing Directorate, General Dynamics Information Tech., Dayton, OH 45431 (United States); Tomlin, David [Wright-Patterson AFB, Air Force Research Laboratory, Materials and Manufacturing Directorate, UES Inc., Dayton, OH 45433 (United States); Fratini, Albert [Chemistry Department, University of Dayton, Dayton, OH 45469 (United States); Juhl, Shane [Wright-Patterson AFB, Air Force Research Laboratory, Materials and Manufacturing Directorate, Dayton, OH 45424 (United States); Chen Weibin [Electro-Optics Graduate Program, University of Dayton, Dayton, OH 45469 (United States)

    2009-01-26

    Femtosecond lasers have a unique ability of processing bulk transparent materials for various applications such as micromachining, waveguide manufacturing, and photonic bandgap structures just to name a few. These applications depend on the formation of micron or submicron size features that are known to be index modifications to the bulk substrate [H. Guo, H. Jiang, Y. Fang, C. Peng, H. Yang, Y. Li, Q. Gong, J. Opt. A: Pure Appl. Opt. 6 (2004) 787]. To the best of our knowledge the physical understanding of how these index-modified features are formed is still unknown, but many good theories exist such as Petite et al. [G. Petite, P. Daguzan, S. Guizard, P. Martin, in: IEEE Annual Report Conference on Electrical Insulation and Dielectric Phenomena, vol. 15, IEEE, 1995, pp. 40-44] or Tien et al. [A. Tien, S. Backus, H. Kapteyn, M. Murnane, G. Mourou, Phys. Rev. Lett. 82 (1999) 3883]. In this Letter the question on the physical cause for index changes is investigated by the combined efforts between Wright-Patterson AFB (WPAFB) and the University of Dayton (UD) using numerous imaging equipment such as TEM, AFM, NSOM, Nomarski microscopy, X-ray crystallography, Raman spectroscopy, and even diffraction efficiency experiments. With all the combined imaging equipment this research is able to present valuable data and deduce plausible theories of the physics of the index modification mechanism.

  9. Estimation of diffusion anisotropy in microporous crystalline materials and optimization of crystal orientation in membranes.

    Science.gov (United States)

    Gounaris, Chrysanthos E; First, Eric L; Floudas, Christodoulos A

    2013-09-28

    The complex nature of the porous networks in microporous materials is primarily responsible for a high degree of intracrystalline diffusion anisotropy. Although this is a well-understood phenomenon, little attention has been paid in the literature with regards to classifying such anisotropy and elucidating its effect on the performance of membrane-based separation systems. In this paper, we develop a novel methodology to estimate full diffusion tensors based on the detailed description of the porous network geometry through our recent advances for the characterization of such networks. The proposed approach explicitly accounts for the tortuosity and complex connectivity of the porous framework, as well as for the variety of diffusion regimes that may be experienced by a guest molecule while it travels through the different localities of the crystal. Results on the diffusion of light gases in silicalite demonstrate good agreement with results from experiments and other computational techniques that have been reported in the literature. A comprehensive computational study involving 183 zeolite frameworks classifies these structures in terms of a number of anisotropy metrics. Finally, we utilize the computed diffusion tensors in a membrane optimization model that determines optimal crystal orientations. Application of the model in the context of separating carbon dioxide from nitrogen demonstrates that optimizing crystal orientation can offer significant benefit to membrane-based separation processes.

  10. The role of synchrotron radiation in examining the self-assembly of crystalline nanoporous framework materials: from zeolites and aluminophosphates to metal organic hybrids

    NARCIS (Netherlands)

    O'Brien, M.G.; Beale, A.M.; Weckhuysen, B.M.

    2013-01-01

    This tutorial review describes the role of synchrotron-based techniques in the study of the formation of Crystalline Nanoporous Framework Materials (CNFMs), such as zeolites, aluminophosphates (AlPOs) and metal organic frameworks (MOFs). Initially, a general formation process for CNFMs is described

  11. An ultra-fast optical shutter exploiting total light absorption in a phase change material

    Science.gov (United States)

    Jafari, Mohsen; Guo, L. Jay; Rais-Zadeh, Mina

    2017-02-01

    In this paper, we present an ultra-fast and high-contrast optical shutter with applications in atomic clock assemblies, integrated photonic systems, communication hardware, etc. The shutter design exploits the total light absorption phenomenon in a thin phase change (PC) material placed over a metal layer. The shutter switches between ON and OFF states by changing PC material phase and thus its refractive index. The PC material used in this work is Germanium Telluride (GeTe), a group IV-VI chalcogenide compound, which exhibits good optical contrast when switching from amorphous to crystalline state and vice versa. The stable phase changing behavior and reliability of GeTe and GeSbTe (GST) have been verified in optical memories and RF switches. Here, GeTe is used as it has a lower extinction coefficient in near-IR regions compared to GST. GeTe can be thermally transitioned between two phases by applying electrical pulses to an integrated heater. The memory behavior of GeTe results in zero static power consumption which is useful in applications requiring long time periods between switching activities. We previously demonstrated a meta-surface employing GeTe in sub-wavelength slits with >14 dB isolation at 1.5 μm by exciting the surface plasmon polariton and localized slit resonances. In this work, strong interference effects in a thin layer of GeTe over a gold mirror result in near total light absorption of up to 40 dB (21 dB measured) in the amorphous phase of the shutter at 780 nm with much less fabrication complexity. The optical loss at the shutter ON state is less than 1.5 dB. A nickel chrome (NiCr) heater provides the Joule heating energy required to achieve the crystallographic phase change. The measured switching speed is 2 μs.

  12. Optical substrate materials for synchrotron radiation beam lines

    Science.gov (United States)

    Howells, Malcolm R.; Paquin, Roger A.

    1997-09-01

    We consider the materials choices available for making optical substrates for synchrotron radiation beam lines. We find that currently the optical surfaces can only be polished to the required finish in fused silica and other glasses, silicon, CVD silicon carbide, electroless nickel and 17-4 PH stainless steel. Substrates must therefore be made of one of these materials or of a metal that can be coated with electroless nickel. In the context of material choices for mirrors we explore the issues of dimensional stability, polishing, bending, cooling, and manufacturing strategy. We conclude that metals are best from an engineering and cost standpoint while the ceramics are best from a polishing standpoint. We then give discussions of specific materials as follows: silicon carbide, silicon, electroless nickel, GlidcopTM, aluminum, precipitation- hardening stainless steel, mild steel, invar and superinvar. Finally we summarize conclusions and propose ideas for further research.

  13. Thermal conductivities of some novel nonlinear optical materials.

    Science.gov (United States)

    Beasley, J D

    1994-02-20

    Results of thermal conductivity measurements are reported for several of the more recently developed nonlinear optical crystals. New or substantially revised values of thermal conductivity were obtained in six materials. Notable thermal conductivities measured were those for AgGaS(2) [0.014 W/(cm K) and 0.015 W/(cm K)], AgGaSe(2) [0.010 W/(cm K) and 0.011 W/(cm K)], beta barium borate [0.016 W/(cm K) and 0.012 W/(cm K)], and ZnGeP(2) [0.36 W/(cm K) and 0.35 W/(cm K)], with values quoted for directions respectively parallel and perpendicular to the optic axis for each material. These new data provide necessary input for the design of high-power optical frequency converters.

  14. Thin-film perovskites-ferroelectric materials for integrated optics

    Energy Technology Data Exchange (ETDEWEB)

    Walker, F.J. [Univ. of Tennessee, Knoxville, TN (United States)]|[Oak Ridge National Lab., TN (United States); McKee, R.A. [Oak Ridge National Lab., TN (United States)

    1995-12-31

    Optical guided wave (OGW) devices, based on LiNbO{sub 3} or GaAs. are commercially available products with established markets and applications. While LiNbO{sub 3} presently dominates the commercial applications, there are several drivers for the development of improved electro-optic (EO) materials. If the appropriate crystal quality could be obtained for thin-film BaTiO{sub 3} supported on MgO for example, or for an integrated BaTiO{sub 3}/Mg0 structure on silicon or GaAs, then the optimum OGW device structure might be realized. We report on our results for the growth of optical quality, epitaxial BaTiO{sub 3} and SrTiO{sub 3} on single-crystal MgO substrates using source shuttering molecular beam epitaxy (MBE) techniques. We also discuss how these materials can be integrated onto silicon. Our MBE studies show that, for this important class of perovskite oxides, heteroepitaxy between the perovskites and alkaline earth oxides is dominated by interfacial electrostatics at the first atomic layers. We have been able to demonstrate that a layer-by-layer energy minimization associated with interfacial electrostatics leads to the growth of high quality thin films of these materials. We have fabricated waveguides from these materials, and the optical clarity and loss coefficients have been characterized and found to be comparable to in-diffused waveguide structures typically represented by Ti drifted LiNbO{sub 3}.

  15. Optically stimulated luminescence dosimetry using natural and synthetic materials

    DEFF Research Database (Denmark)

    Bøtter-Jensen, L.; McKeever, S.W.S.

    1996-01-01

    The application of optically stimulated luminescence (OSL) for use in radiation dosimetry is reviewed. A broad description is given of OSL techniques developed at Riso National Laboratory and at Oklahoma State University, and recent collaborative investigations on the properties of a variety of n......, and unseparated materials such as bricks and porcelain items....

  16. Lanthanide-Activated Fiber Materials for Broadband Optical Amplifiers

    Institute of Scientific and Technical Information of China (English)

    Yong; Gyu; Choi; Bong; Je; Park; Doo; Hee; Cho; Hong; Seok; Seo; Myung; Hyun; Lee; Kyong; Hon; Kim

    2003-01-01

    Some intra-4/-configurational transitions of lanthanide, of which radiative emissions cover in wavelengths the optical communication window of the currently available OH-free silica-based line fibers, are discussed in terms of relationship between their emission properties and host fiber materials.

  17. Rational design of organic electro-optic materials

    Energy Technology Data Exchange (ETDEWEB)

    Dalton, L R [Departments of Chemistry and Electrical Engineering, University of Washington, Seattle, WA 98195-1700 (United States)

    2003-05-28

    Quantum mechanical calculations are used to optimize the molecular first hyperpolarizability of organic chromophores and statistical mechanical calculations are used to optimize the translation of molecular hyperpolarizability to macroscopic electro-optic activity (to values of greater than 100 pm V{sup -1} at telecommunications wavelengths). Macroscopic material architectures are implemented exploiting new concepts in nanoscale architectural engineering. Multi-chromophore-containing dendrimers and dendronized polymers not only permit optimization of electro-optic activity but also of auxiliary properties including optical loss (both absorption and scattering), thermal and photochemical stability and processability. New reactive ion etching and photolithographic techniques permit the fabrication of three-dimensional optical circuitry and the integration of that circuitry with semiconductor very-large-scale integration electronics and silica fibre optics. Electro-optic devices have been fabricated exploiting stripline, cascaded prism and microresonator device structures. Sub-1 V drive voltages and operational bandwidths of greater than 100 GHz have been demonstrated. Both single-and double-ring microresonators have been fabricated for applications such as active wavelength division multiplexing. Free spectral range values of 1 THz and per channel modulation bandwidths of 15 GHz have been realized permitting single-chip data rates of 500 Gb s{sup -1}. Other demonstrated devices include phased array radar, optical gyroscopes, acoustic spectrum analysers, ultrafast analog/digital converters and ultrahigh bandwidth signal generators. (topical review)

  18. COMBINED EFFECT OF MECHANICAL GROOVING AND STAIN-ETCHED SURFACE ON OPTICAL AND ELECTRICAL PROPERTIES OF CRYSTALLINE SILICON SUBSTRATES

    OpenAIRE

    AHMED ZARROUG; LOTFI DERBALI; RACHID OUERTANI; WISSEM DIMASSI; HATEM EZZAOUIA

    2014-01-01

    This paper investigates the combined effect of mechanical grooving and porous silicon (PS) on the front surface reflectance and the electronic properties of crystalline silicon substrates. Mechanical surface texturization leads to reduce the cell reflectance, enhance the light trapping and augment the carrier collection probability. PS was introduced as an efficient antireflective coating (ARC) onto the front surface of crystalline silicon solar cell. Micro-periodic V-shaped grooves were made...

  19. Oxidation processes in magneto-optic and related materials

    Science.gov (United States)

    Lee, Paul A.; Armstrong, Neal R.; Danzinger, James L.; England, Craig D.

    1992-01-01

    The surface oxidation processes of thin films of magneto-optic materials, such as the rare-earth transition metal alloys have been studied, starting in ultrahigh vacuum environments, using surface analysis techniques, as a way of modeling the oxidation processes which occur at the base of a defect in an overcoated material, at the instant of exposure to ambient environments. Materials examined have included FeTbCo alloys, as well as those same materials with low percentages of added elements, such a Ta, and their reactivities to both O2 and H2O compared with materials such as thin Fe films coated with ultrathin adlayers of Ti. The surface oxidation pathways for these materials is reviewed, and XPS data presented which indicates the type of oxides formed, and a critical region of Ta concentration which provides optimum protection.

  20. 3D Printing Optical Engine for Controlling Material Microstructure

    Science.gov (United States)

    Huang, Wei-Chin; Chang, Kuang-Po; Wu, Ping-Han; Wu, Chih-Hsien; Lin, Ching-Chih; Chuang, Chuan-Sheng; Lin, De-Yau; Liu, Sung-Ho; Horng, Ji-Bin; Tsau, Fang-Hei

    Controlling the cooling rate of alloy during melting and resolidification is the most commonly used method for varying the material microstructure and consequently the resuling property. However, the cooling rate of a selective laser melting (SLM) production is restricted by a preset optimal parameter of a good dense product. The head room for locally manipulating material property in a process is marginal. In this study, we invent an Optical Engine for locally controlling material microstructure in a SLM process. It develops an invovative method to control and adjust thermal history of the solidification process to gain desired material microstucture and consequently drastically improving the quality. Process parameters selected locally for specific materials requirement according to designed characteristics by using thermal dynamic principles of solidification process. It utilize a technique of complex laser beam shape of adaptive irradiation profile to permit local control of material characteristics as desired. This technology could be useful for industrial application of medical implant, aerospace and automobile industries.

  1. Nature of phase transitions in crystalline and amorphous GeTe-Sb2Te3 phase change materials.

    Science.gov (United States)

    Kalkan, B; Sen, S; Clark, S M

    2011-09-28

    The thermodynamic nature of phase stabilities and transformations are investigated in crystalline and amorphous Ge(1)Sb(2)Te(4) (GST124) phase change materials as a function of pressure and temperature using high-resolution synchrotron x-ray diffraction in a diamond anvil cell. The phase transformation sequences upon compression, for cubic and hexagonal GST124 phases are found to be: cubic → amorphous → orthorhombic → bcc and hexagonal → orthorhombic → bcc. The Clapeyron slopes for melting of the hexagonal and bcc phases are negative and positive, respectively, resulting in a pressure dependent minimum in the liquidus. When taken together, the phase equilibria relations are consistent with the presence of polyamorphism in this system with the as-deposited amorphous GST phase being the low entropy low-density amorphous phase and the laser melt-quenched and high-pressure amorphized GST being the high entropy high-density amorphous phase. The metastable phase boundary between these two polyamorphic phases is expected to have a negative Clapeyron slope. © 2011 American Institute of Physics

  2. Single and multiple scattering XAFS Debye-Waller factors for crystalline materials using periodic Density Functional Theory

    Energy Technology Data Exchange (ETDEWEB)

    Dimakis, N; Mion, T [Department of Physics and Geology, University of Texas-Pan American, Edinburg, TX 78539 (United States); Bunker, G, E-mail: dimakis@utpa.ed [Department of Biological Chemical and Physical Sciences, Illinois Institute of Technology, Chicago, IL 60616 (United States)

    2009-11-15

    We present an accurate and efficient technique for calculating thermal X-ray absorption fine structure (XAFS) Debye-Waller factors (DWFs) applicable to crystalline materials. Using Density Functional Theory on a 3x3x3 supercell pattern of MnO structure, under the nonlocal hybrid B3LYP functional paired with Gaussian local basis sets, we obtain the normal mode eigenfrequencies and eigenvectors; these parameters are in turn used to calculate single and multiple scattering XAFS DWFs. The DWFs obtained via this technique are temperature dependent expressions and can be used to substantially reduce the number of fitting parameters, when experimental spectra are fitted with a hypothetical structure. The size of the supercell size limits the R-space range that these parameters could be used. Therefore corresponding DWFs for paths outside of this range are calculated using the correlated Debye model. Our method is compared with prior cluster calculations and with corresponding values obtained from fitting experimental XAFS spectra on manganosite with simulated spectra.

  3. Effect of long range order on sheared liquid crystalline materials: flow regimes, transitions, and rheological phase diagrams

    Science.gov (United States)

    Tsuji; Rey

    2000-12-01

    A generalized theory that includes short-range elasticity, long-range elasticity, and flow effects is used to simulate and characterize the shear flow of liquid crystalline materials as a function of the Deborah (De) and Ericksen (Er) numbers in the presence of fixed planar director boundary conditions; the results are also interpreted as a function of the ratio R between short-range and long-range elasticity. The results are effectively summarized into rheological phase diagrams spanned by De and Er, and also by R and Er, where the stability region of four distinct flow regimes are indicated. The four regimes for planar (two-dimensional orientation) shear flow are (1) the elastic-driven steady state, (2) the composite tumbling-wagging periodic state, (3) the wagging periodic state, and (4) the viscous-driven steady state. The coexistence of the four regimes at a quacritical point is shown to be due to the emergence of a defect structure. The origin, the significant steady and dynamical features, and the transitions between these regimes are thoroughly characterized and analyzed. Quantitative and qualitative comparisons between the present complete model predictions and those obtained from the classical theories of nematodynamics (Leslie-Ericksen and Doi theories) are presented and the main physical mechanisms that drive the observed deviations between the predictions of these models are identified. The presented results fill the previously existing gap between the classical Leslie-Ericksen theory and the Doi theory, and present a unified description of nematodynamics.

  4. Electrical induction and optical erasure of birefringence in the isotropic liquid phase of a dichiral azobenzene liquid-crystalline compound (Presentation Recording)

    Science.gov (United States)

    Yamamoto, Takahiro; Nishiyama, Isa

    2015-10-01

    Liquid crystal is a representative soft matter, which has physical properties between those of conventional liquid and those of crystal in a temperature range above a melting point. A liquid-crystal display (LCD) employs the response of the liquid-crystal alignment to the electric field and is a key device of an information display. For common LCDs, the precise control of the initial alignment of LC molecules is needed so that a good dark state, thus a high contrast ratio, can be obtained. If the birefringence can be induced in the liquid phase by the application of electric field, it is of great use as a material for the LCD application. In this study, we will report a unique property of dichiral azobenzene liquid crystals: an electric induction of birefringence in a liquid phase of an antiferroelectric dichiral azobenzene liquid crystal. The optically isotropic texture changes into the homogenous birefringent texture by the application of the in-plane electric field above the clearing temperature of the liquid crystal. We find that one of the possible reasons of the induction of the birefringence in the isotropic phase is the electrically-induced increase of the phase transition temperature between the antiferroelectric liquid-crystalline and "liquid" phases, i.e., increase in the clearing temperature. The resulting birefringence can be disappeared by the irradiation of UV light, due to the photoinduced isomerization of the azobenzene compound, thus dual control of the birefringent structure, by the irradiation of light and/or by the application of the electric field, is achieved.

  5. Causality relations for materials with strong artificial optical chirality

    CERN Document Server

    Gorkunov, M V; Ezhov, A A; Artemov, V V; Rogov, O Y

    2014-01-01

    We demonstrate that the fundamental causality principle being applied to strongly chiral artificial materials yields the generalized Kramers-Kronig relations for the observables -- circular dichroism and optical activity. The relations include the Blaschke terms determined by material-specific features - the zeros of transmission amplitude on the complex frequency plane. By the example of subwavelength arrays of chiral holes in silver films we show that the causality relations can be used not only for a precise verification of experimental data but also for resolving the positions of material anomalies and resonances and quantifying the degree of their chiral splitting.

  6. Investigation of the Optical and Electronic Properties of Crystalline Organic Materials

    Science.gov (United States)

    1990-06-14

    A.Y. Cho and J.R. Arthur , Prog. Solid-State Chem. 10, 157 (1975) 10 R.D. Dupuis and P.D. Dapkus, IEEE J. Quantum Electron. QE-i15, 128 (1979) 11 U...Phys. 37, 4789 (1966) 37 J.D. Wright, Molecular Crystals, (Cambridge, New York, 1987) 38 R.C. Miller, D.A. Kleinman , W.T. Tsang, and A.C. Gossard

  7. Non-Linear Optical Phenomena in Detecting Materials as a Possibility for Fast Timing in Detectors of Ionizing Radiation

    CERN Document Server

    Korjik, M. V.; Buganov, O.; Fedorov, A. A.; Emelianchik, I.; Griesmayer, E.; Mechinsky, V.; Nargelas, S.; Sidletskiy, O.; Tamulaitis, G.; Tikhomirov, S. N.; Vaitkevicius, A.

    2016-01-01

    The time resolution of the detectors currently in use is limited by 50-70 ps due to the spontaneous processes involved in the development of the response signal, which forms after the relaxation of carriers generated during the interaction. In this study, we investigate the feasibility of exploiting sub-picosecond phenomena occurring after the interaction of scintillator material with ionizing radiation by probing the material with ultra-short laser pulses. One of the phenomena is the elastic polarization due to the local lattice distortion caused by the displacement of electrons and holes generated by ionization. The key feature of the elastic polarization is its short response time, which makes it prospective for using as an optically detectable time mark. The nonlinear optical absorption of femtosecond light pulses of appropriate wavelength is demonstrated to be a prospective tool to form the mark. This study was aimed at searching for inorganic crystalline media combining scintillation properties and non-...

  8. Crystalline Silica Primer

    Science.gov (United States)

    ,

    1992-01-01

    Crystalline silica is the scientific name for a group of minerals composed of silicon and oxygen. The term crystalline refers to the fact that the oxygen and silicon atoms are arranged in a threedimensional repeating pattern. This group of minerals has shaped human history since the beginning of civilization. From the sand used for making glass to the piezoelectric quartz crystals used in advanced communication systems, crystalline silica has been a part of our technological development. Crystalline silica's pervasiveness in our technology is matched only by its abundance in nature. It's found in samples from every geologic era and from every location around the globe. Scientists have known for decades that prolonged and excessive exposure to crystalline silica dust in mining environments can cause silicosis, a noncancerous lung disease. During the 1980's, studies were conducted that suggested that crystalline silica also was a carcinogen. As a result of these findings, crystalline silica has been regulated under the Occupational Safety and Health Administration's (OSHA) Hazard Communication Standard (HCS). Under HCS, OSHAregulated businesses that use materials containing 0.1% or more crystalline silica must follow Federal guidelines concerning hazard communication and worker training. Although the HCS does not require that samples be analyzed for crystalline silica, mineral suppliers or OSHAregulated

  9. Towards simultaneous achievement of carrier activation and crystallinity in Ge and GeSn with heated phosphorus ion implantation: An optical study

    Science.gov (United States)

    D'Costa, Vijay Richard; Wang, Lanxiang; Wang, Wei; Lim, Sin Leng; Chan, Taw Kuei; Chua, Lye Hing; Henry, Todd; Zou, Wei; Hatem, Christopher; Osipowicz, Thomas; Tok, Eng Soon; Yeo, Yee-Chia

    2014-09-01

    We have investigated the optical properties of Ge and GeSn alloys implanted with phosphorus ions at 400 °C by spectroscopic ellipsometry from far-infrared to ultraviolet. The dielectric response of heated GeSn implants displays structural and transport properties similar to those of heated Ge implants. The far-infrared dielectric function of as-implanted Ge and GeSn shows the typical free carrier response which can be described by a single Drude oscillator. Bulk Ge-like critical points E1, E1 + Δ1, E0', and E2 are observed in the visible-UV dielectric function of heated Ge and GeSn indicating single crystalline quality of the as-implanted layers. Although the implantation at 400 °C recovers crystallinity in both Ge and GeSn, an annealing step is necessary to enhance the carrier activation.

  10. Systematic development of new thermoluminescence and optically stimulated luminescence materials

    Energy Technology Data Exchange (ETDEWEB)

    Yukihara, E.G., E-mail: eduardo.yukihara@okstate.edu [Physics Department, 145 Physical Sciences II, Oklahoma State University, Stillwater, OK 74078 (United States); Milliken, E.D.; Oliveira, L.C. [Physics Department, 145 Physical Sciences II, Oklahoma State University, Stillwater, OK 74078 (United States); Orante-Barron, V.R. [Departamento de Investigacion en Polimeros y Materiales, Universidad de Sonora, Hermosillo, Sonora 83000, Mexico (Mexico); Jacobsohn, L.G. [Center for Optical Materials Science and Engineering Technologies (COMSET), and School of Materials Science and Engineering, Clemson University, Clemson, SC (United States); Blair, M.W. [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2013-01-15

    This paper presents an overview of a systematic study to develop new thermoluminescence (TL) and optically stimulated luminescence (OSL) materials using solution combustion synthesis (SCS) for applications such as personal OSL dosimetry, 2D dose mapping, and temperature sensing. A discussion on the material requirements for these applications is included. We present X-ray diffraction (XRD) data on single phase materials obtained with SCS, as well as radioluminescence (RL), TL and OSL data of lanthanide-doped materials. The results demonstrate the possibility of producing TL and OSL materials with sensitivity similar to or approaching those of commercial TL and OSL materials used in dosimetry (e.g., LiF:Mg,Ti and Al{sub 2}O{sub 3}:C) using SCS. The results also show that the luminescence properties can be improved by Li co-doping and annealing. The presence of an atypical TL background and anomalous fading are discussed and deserve attention in future investigations. We hope that these preliminary results on the use of SCS for production of TL and OSL materials are helpful to guide future efforts towards the development of new luminescence materials for different applications. - Highlights: Black-Right-Pointing-Pointer TL and OSL material produced with sensitivity similar to commercial materials. Black-Right-Pointing-Pointer Luminescence properties improved by Li co-doping and annealing. Black-Right-Pointing-Pointer The presence of atypical TL background and anomalous fading observed.

  11. Optical constants of infrared (IR) materials in the IR region

    Science.gov (United States)

    Nagendra, C. L.; Thutupalli, G. K. M.

    1992-01-01

    Optical constants, i.e., refractive index 'n' and absorption index 'k' of the IR materials, Ge, ThF4, CdTe and CdSe have been determined, through spectrophotometric method, in the IR region from 2.5 to 15 microns. It is seen that all these films are transparent in the IR region, and the optical constants of the films deposited at elevated temperatures (T = 200 C) are unaffected, even after subjecting to severe environs such as humidity and thermal shock/cycling. Making use of Ge/ThF4 and CdTe/CdSe coating combinations, IR antireflection coatings (ARCs) which can find applications in space-borne electrooptical systems have been successfully designed and developed. The resulting ARCs have not only efficient optical properties, low reflection loss and high transmission, but are also durable against adverse environments.

  12. Inkjet Printing of Functional Materials for Optical and Photonic Applications

    Directory of Open Access Journals (Sweden)

    Jorge Alamán

    2016-11-01

    Full Text Available Inkjet printing, traditionally used in graphics, has been widely investigated as a valuable tool in the preparation of functional surfaces and devices. This review focuses on the use of inkjet printing technology for the manufacturing of different optical elements and photonic devices. The presented overview mainly surveys work done in the fabrication of micro-optical components such as microlenses, waveguides and integrated lasers; the manufacturing of large area light emitting diodes displays, liquid crystal displays and solar cells; as well as the preparation of liquid crystal and colloidal crystal based photonic devices working as lasers or optical sensors. Special emphasis is placed on reviewing the materials employed as well as in the relevance of inkjet in the manufacturing of the different devices showing in each of the revised technologies, main achievements, applications and challenges.

  13. Graphically Selecting Optical Material for Color Correction and Passive Athermalization

    Directory of Open Access Journals (Sweden)

    Raghad Ismail Ibrahim

    2016-04-01

    Full Text Available This paper presents pair optical glass by using a graphical method for selecting achromatize and athermalize an imaging lens. An athermal glass map that plots thermal glass constant versus inverse Abbe number is derived through analysis of optical glasses in visible light. By introducing the equivalent Abbe number and equivalent thermal glass constant, although it is a multi-lens system, we have a simple way to visually identify possible optical materials. ZEMAX will be used to determine the change in focus through the expected temperature changes in Earth orbit. The thermal defocuses over -20°C to +60°C are reduced to be much less than the depth of focus of the system

  14. Diffused holographic information storage and retrieval using photorefractive optical materials

    Science.gov (United States)

    McMillen, Deanna Kay

    Holography offers a tremendous opportunity for dense information storage, theoretically one bit per cubic wavelength of material volume, with rapid retrieval, of up to thousands of pages of information simultaneously. However, many factors prevent the theoretical storage limit from being reached, including dynamic range problems and imperfections in recording materials. This research explores new ways of moving closer to practical holographic information storage and retrieval by altering the recording materials, in this case, photorefractive crystals, and by increasing the current storage capacity while improving the information retrieved. As an experimental example of the techniques developed, the information retrieved is the correlation peak from an optical recognition architecture, but the materials and methods developed are applicable to many other holographic information storage systems. Optical correlators can potentially solve any signal or image recognition problem. Military surveillance, fingerprint identification for law enforcement or employee identification, and video games are but a few examples of applications. A major obstacle keeping optical correlators from being universally accepted is the lack of a high quality, thick (high capacity) holographic recording material that operates with red or infrared wavelengths which are available from inexpensive diode lasers. This research addresses the problems from two positions: find a better material for use with diode lasers, and reduce the requirements placed on the material while maintaining an efficient and effective system. This research found that the solutions are new dopants introduced into photorefractive lithium niobate to improve wavelength sensitivities and the use of a novel inexpensive diffuser that reduces the dynamic range and optical element quality requirements (which reduces the cost) while improving performance. A uniquely doped set of 12 lithium niobate crystals was specified and

  15. Unidirectional growth of large size urea doped L-cysteine hydrochloride monohydrate NLO organic crystal and investigations of its crystalline and optical properties

    Science.gov (United States)

    Verma, Sunil; Ramachandra Rao, K.; Kar, S.; Bartwal, K. S.

    2016-01-01

    Organic crystals of urea doped L-cysteine hydrochloride monohydrate have been grown by unidirectional solution growth technique. The crystal grown by this technique has high growth rate as compared to the crystals grown using conventional slow cooling method. This method is ideally suited to grow crystals along a specific direction. The growth process was monitored at regular intervals of time in a time-lapsed manner to estimate the growth rate and also monitor its quality visually. The grown crystal was subjected to different characterizations in order to confirm the phase of the grown crystal, its crystalline perfection and optical properties. The X-ray diffraction confirmed the phase of the crystal. The rocking curve recorded using high resolution X-ray diffraction (HRXRD) technique reveals that the crystal grown using conventional slow cooling method has internal gain boundaries whereas that grown by unidirectional technique has high degree of crystalline perfection. The bonding environment present in the crystal was characterized by FTIR spectroscopy where vibrational frequencies of the different functional groups present were identified. The optical quality of the crystal was characterized using UV-vis-NIR spectrophotometer and Mach-Zehnder interferometer. The nonlinear optical response of the crystal was measured using Kurtz-Perry method and found to be 1.4 times that of a KDP crystal.

  16. Evaluation of Pyro-optic Materials for Infrared Imaging

    Science.gov (United States)

    Pandey, R. K.; Kotru, Sushma; Song, Xiuyu; Donnelly, David

    2004-03-01

    Infrared detectors are needed for a wide range of applications. IR detectors operate either on the principles of photon detection or pyroelectric detection. Both these systems have their respective advantages and disadvantages. However, both of them inherently have difficulties in management of noise to signal ratio and in read-out circuitory. One of the most serious handicaps of photon detectors is requirement of cryogenic cooling for satisfactory operation. In this respect uncooled pyroelectric detectors operating at above room temperature have an advantage. An alternative to these approaches can be pyro-optic based detectors. Only a handful of materials have been found with some satisfactory level of pyro-optic coefficients appropriate for imaginig devices. Some of them are: antimony-sulfo-iodide (SbSI), molybdenum sulfide (MoS2), bismuth vanadate (BiVO4) and Pb-based titanates. Pyrooptic coefficients of these materials have been reported using presumably bulk single crystals. However, no such data are available for their thin films which would be very important for light weight integrated structured devices.In this paper we will describe the parameters and optimization protocol for the growh of thin films of these materials on thermally insulating substrates. We will also discuss their structural, electrical and optical properties. Our investigations suggest that SbSI, BiVO4 and PNZT films are attractive options for advancing the IR detecting technology by utilizing the pyro-optic effect. Integrated thin film structures might lead to the fabrication of light weight, low cost, noise immune and efficient imaging devices based on pyro-optic properties. This research is sponsored by the DEPSCoR program of the U.S. Army Research Office.

  17. Could optical lattices be used to simulate real materials?

    CERN Document Server

    Hague, J P

    2015-01-01

    With the aim of understanding whether it is possible to build a quantum simulator that can probe multiband effects, we make DFT calculations for a system of cold atoms/ions. These move in a 1/r periodic potential convoluted by resolution effects, which represent the closest form of optical lattice to the nuclear potential in materials, that could be generated with painted potentials or holograms. We demonstrate that while resolution effects in optical lattices affect bandstructures, the physics of the bands closest to the fermi surface is sufficiently similar to that in real materials that they could give useful insight into complex multi-band processes. We determine that decoherence effects are sufficiently small that they do not destroy multiband effects, however there are strict constraints on the temperature and strength of interactions in experimental systems. The interaction form investigated here is most appropriate for cold ions, since inter-ion potentials have a native 1/r form. While a scaling argum...

  18. Optical Microresonators for Sensing and Transduction: A Materials Perspective.

    Science.gov (United States)

    Heylman, Kevin D; Knapper, Kassandra A; Horak, Erik H; Rea, Morgan T; Vanga, Sudheer K; Goldsmith, Randall H

    2017-08-01

    Optical microresonators confine light to a particular microscale trajectory, are exquisitely sensitive to their microenvironment, and offer convenient readout of their optical properties. Taken together, this is an immensely attractive combination that makes optical microresonators highly effective as sensors and transducers. Meanwhile, advances in material science, fabrication techniques, and photonic sensing strategies endow optical microresonators with new functionalities, unique transduction mechanisms, and in some cases, unparalleled sensitivities. In this progress report, the operating principles of these sensors are reviewed, and different methods of signal transduction are evaluated. Examples are shown of how choice of materials must be suited to the analyte, and how innovations in fabrication and sensing are coupled together in a mutually reinforcing cycle. A tremendously broad range of capabilities of microresonator sensors is described, from electric and magnetic field sensing to mechanical sensing, from single-molecule detection to imaging and spectroscopy, from operation at high vacuum to in live cells. Emerging sensing capabilities are highlighted and put into context in the field. Future directions are imagined, where the diverse capabilities laid out are combined and advances in scalability and integration are implemented, leading to the creation of a sensor unparalleled in sensitivity and information content. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Image density property of optical information recording microcapsule material

    Science.gov (United States)

    Lai, Weidong; Li, Xiaowei; Li, Xinzheng; Fu, Guangsheng

    2009-05-01

    The microcapsules can act as novel optical functional material in which the optical recording substance such as color-forming substance, photoinitiator and prepolymer are encapsulated. In this paper, the microcapsules with average particle diameter of 300nm are prepared with interfacial polymerization method. The optical responding character of the microcapsule is analyzed based on IR spectra and image density technique. Results show that the microcapsule material encapsulated prepolymer TMPTA and photoinitiator Irgacure-ITX, TPO has thermal phase-change at 140°C, at which the penetrability of the microcapsule has the highest efficiency. With the increase of exposure time, the reduction in absorption intensities of the prepolymer TMPTA are observed at 1635cm-1 of C=C stretching and 898cm-1 of C-H stretching on the C=C molecular bond. Such a result can be ascribed to the double bond cleavage process of the prepolymer TMPTA is initiated by the optical-exposed photoinitiator, and superpolymer network is formed. The image density contrast between the unexposed and exposed microcapsule is enhanced with exposure time increased.

  20. Self-Assembled Soft Optical Negative Index Materials

    Science.gov (United States)

    2008-08-05

    Nanorods by Lyotropic Chromonic Materials’, Langmuir, 24 (2008), 13833-37. [15]. A. B. Golovin , and O. D. Lavrentovich, ’Electrically...Reconfigurable Optical Metamaterial Based on Colloidal Dispersion of Metal Nanorods in Dielectric Fluid’, Applied Physics Letters, 95 (2009) [16]. A. B. Golovin ...of Metal Nano-Rods in Dielectric Fluids’, Liquid Crystals Xiv, 7775 (2010) [17]. A. B. Golovin , J. Xiang, H. S. Park, L. Tortora, Y. A. Nastishin

  1. Optical Sensors for Biomolecules Using Nanoporous Sol-Gel Materials

    Science.gov (United States)

    Fang, Jonathan; Zhou, Jing C.; Lan, Esther H.; Dunn, Bruce; Gillman, Patricia L.; Smith, Scott M.

    2004-01-01

    An important consideration for space missions to Mars is the ability to detect biosignatures. Solid-state sensing elements for optical detection of biological entities are possible using sol-gel based biologically active materials. We have used these materials as optical sensing elements in a variety of bioassays, including immunoassays and enzyme assays. By immobilizing an appropriate biomolecule in the sol-gel sensing element, we have successfully detected analytes such as amino acids and hormones. In the case of the amino acid glutamate, the enzyme glutamate dehydrogenase was the immobilized molecule, whereas in the case of the hormone cortisol, an anti-cortisol antibody was immobilized in the sensing element. In this previous work with immobilized enzymes and antibodies, excellent sensitivity and specificity were demonstrated in a variety of formats including bulk materials, thin films and fibers. We believe that the sol-gel approach is an attractive platform for bioastronautics sensing applications because of the ability to detect a wide range of entities such as amino acids, fatty acids, hopanes, porphyrins, etc. The sol-gel approach produces an optically transparent 3D silica matrix that forms around the biomolecule of interest, thus stabilizing its structure and functionality while allowing for optical detection. This encapsulation process protects the biomolecule and leads to a more "rugged" sensor. The nanoporous structure of the sol-gel matrix allows diffusion of small target molecules but keeps larger, biomolecules immobilized in the pores. We are currently developing these biologically active sol-gel materials into small portable devices for on-orbit cortisol detection

  2. Engineering materials for mid-infrared optical sensor applications

    Directory of Open Access Journals (Sweden)

    Richardson K. A

    2013-11-01

    Full Text Available Planar optical structures based on functionalized chalcogenide glasses provide a superb device platform for chemical and biological sensing applications. Chalcogenide glasses have demonstrated promise as materials for infrared sensing as they exhibit transparency over a large range of infrared wavelengths and tunable optical properties through doping and/or compositional tailoring. Waveguides, resonators and other components processed on-chip (silicon, Si can be realized such that the strong enhancement in the electromagnetic field confined within a high index contrast resonator, leads to highly sensitive photon-matter interactions in a small footprint. In this paper we discuss the development of highly sensitive chalcogenide glass based microdisk resonator sensors that measure resonant peak shifts caused by refractive index change upon exposure to a chemical analyte. The specificity of the microdisk resonator sensors is enhanced by applying specialized polymer films and nanofoams that respond in a predictable fashion when exposed to a chemical analyte of interest. Discussed are key material science challenges needed to enable highly sensitive and specific sensors based on such complex multi-material assemblies and the fabrication issues that ultimately define resulting optical performance.

  3. First principles crystal engineering of nonlinear optical materials. I. Prototypical case of urea

    Science.gov (United States)

    Masunov, Artëm E.; Tannu, Arman; Dyakov, Alexander A.; Matveeva, Anastasia D.; Freidzon, Alexandra Ya.; Odinokov, Alexey V.; Bagaturyants, Alexander A.

    2017-06-01

    The crystalline materials with nonlinear optical (NLO) properties are critically important for several technological applications, including nanophotonic and second harmonic generation devices. Urea is often considered to be a standard NLO material, due to the combination of non-centrosymmetric crystal packing and capacity for intramolecular charge transfer. Various approaches to crystal engineering of non-centrosymmetric molecular materials were reported in the literature. Here we propose using global lattice energy minimization to predict the crystal packing from the first principles. We developed a methodology that includes the following: (1) parameter derivation for polarizable force field AMOEBA; (2) local minimizations of crystal structures with these parameters, combined with the evolutionary algorithm for a global minimum search, implemented in program USPEX; (3) filtering out duplicate polymorphs produced; (4) reoptimization and final ranking based on density functional theory (DFT) with many-body dispersion (MBD) correction; and (5) prediction of the second-order susceptibility tensor by finite field approach. This methodology was applied to predict virtual urea polymorphs. After filtering based on packing similarity, only two distinct packing modes were predicted: one experimental and one hypothetical. DFT + MBD ranking established non-centrosymmetric crystal packing as the global minimum, in agreement with the experiment. Finite field approach was used to predict nonlinear susceptibility, and H-bonding was found to account for a 2.5-fold increase in molecular hyperpolarizability to the bulk value.

  4. THz - ToF Optical Layer Analysis (OLA) to determine optical properties of dielectric materials

    Science.gov (United States)

    Spranger, Holger; Beckmann, Jörg

    2017-02-01

    Electromagnetic waves with frequencies between 0.1 and 10 THz are described as THz-radiation (T-ray). The ability to penetrate dielectric materials makes T-rays attractive to reveal discontinuities in polymer and ceramic materials. THz-Time Domain Spectroscopy Systems (THz-TDS) are available on the market today which operates with THz-pulses transmitted and received by optically pumped semiconductor antennas. In THz-TDS the travelling time (ToF) and shape of the pulse is changed if it interacts with the dielectric material and its inherent discontinuities. A tomogram of the object under the test can be reconstructed from time of flight diffraction (ToFD) scans if a synthetic focusing aperture (SAFT) algorithm is applied. The knowledge of the base materials shape and optical properties is essential for a proper reconstruction result. To obtain these properties a model is assumed which describes the device under the test as multilayer structure composed of thin layers with different dielectric characteristics. The Optical Layer Analysis (OLA) is able to fulfill these requirements. A short description why the optical properties are crucial for meaningful SAFT reconstruction results will be given first. Afterwards the OLA will be derived and applied on representative samples to discuss and evaluate its benefits and limits.

  5. Examination of an optical transmittance test for photovoltaic encapsulation materials

    Science.gov (United States)

    Miller, David C.; Bengoechea, Jaione; Bokria, Jayesh G.; Köhl, Michael; Powell, Nick E.; Smith, Michael E.; White, Michael D.; Wilson, Helen Rose; Wohlgemuth, John H.

    2013-09-01

    The optical transmittance of encapsulation materials is a key characteristic for their use in photovoltaic (PV) modules. Changes in transmittance with time in the field affect module performance, which may impact product warranties. Transmittance is important in product development, module manufacturing, and field power production (both immediate and long-term). Therefore, an international standard (IEC 62788-1-4) has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the optical performance of PV encapsulation materials. Existing standards, such as ASTM E903, are general and more appropriately applied to concentrated solar power than to PV. Starting from the optical transmittance measurement, the solar-weighted transmittance of photon irradiance, yellowness index (which may be used in aging studies to assess durability), and ultraviolet (UV) cut-off wavelength may all be determined using the proposed standard. The details of the proposed test are described. The results of a round-robin experiment (for five materials) conducted at seven laboratories to validate the test procedure using representative materials are also presented. For example, the Encapsulation Group actively explored the measurement requirements (wavelength range and resolution), the requirements for the spectrophotometer (including the integrating sphere and instrument accessories, such as a depolarizer), specimen requirements (choice of glass-superstrate and -substrate), and data analysis (relative to the light that may be used in the PV application). The round-robin experiment identified both intra- and inter-laboratory instrument precision and bias for five encapsulation materials (encompassing a range of transmittance and haze-formation characteristics).

  6. Examination of an optical transmittance test for photovoltaic encapsulation materials

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David C.; Bengoechea, Jaione; Bokria, Jayesh G.; Köhl, Michael; Powell, Nick E.; Smith, Michael E.; White, Michael D.; Wilson, Helen Rose; Wohlgemuth, John H.; Dhere, Neelkanth G.; Wohlgemuth, John H.; Lynn, Kevin W.

    2013-09-24

    The optical transmittance of encapsulation materials is a key characteristic for their use in photovoltaic (PV) modules. Changes in transmittance with time in the field affect module performance, which may impact product warranties. Transmittance is important in product development, module manufacturing, and field power production (both immediate and long-term). Therefore, an international standard (IEC 62788-1-4) has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the optical performance of PV encapsulation materials. Existing standards, such as ASTM E903, are general and more appropriately applied to concentrated solar power than to PV. Starting from the optical transmittance measurement, the solar-weighted transmittance of photon irradiance, yellowness index (which may be used in aging studies to assess durability), and ultraviolet (UV) cut-off wavelength may all be determined using the proposed standard. The details of the proposed test are described. The results of a round-robin experiment (for five materials) conducted at seven laboratories to validate the test procedure using representative materials are also presented. For example, the Encapsulation Group actively explored the measurement requirements (wavelength range and resolution), the requirements for the spectrophotometer (including the integrating sphere and instrument accessories, such as a depolarizer), specimen requirements (choice of glass-superstrate and -substrate), and data analysis (relative to the light that may be used in the PV application). The round-robin experiment identified both intra- and inter-laboratory instrument precision and bias for five encapsulation materials (encompassing a range of transmittance and haze-formation characteristics).

  7. 18th Workshop on Crystalline Silicon Solar Cells and Modules: Materials and Processes; Workshop Proceedings, 3-6 August 2008, Vail, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B. L.

    2008-09-01

    The National Center for Photovoltaics sponsored the 18th Workshop on Crystalline Silicon Solar Cells & Modules: Materials and Processes, held in Vail, CO, August 3-6, 2008. This meeting provided a forum for an informal exchange of technical and scientific information between international researchers in the photovoltaic and relevant non-photovoltaic fields. The theme of this year's meeting was 'New Directions for Rapidly Growing Silicon Technologies.'

  8. Photonic Properties of Er-Doped Crystalline Silicon

    NARCIS (Netherlands)

    Vinh, N. Q.; Ha, N. N.; T. Gregorkiewicz,

    2009-01-01

    During the last four decades, a remarkable research effort has been made to understand the physical properties of Si:Er material, as it is considered to be a promising approach towards improving the optical properties of crystalline Si. in this paper, we present a summary of the most important resul

  9. Physics of electromagnetic and material stresses in optical manipulation

    Science.gov (United States)

    Kemp, Brandon A.; Sheppard, Cheyenne J.

    2015-08-01

    Modeling the dynamics of optical manipulation experiments relies upon a precise mathematical representation of electromagnetic fields and the interpretation of optical momentum and stresses in materials. However, the momentum of light within media has been an issue of debate over the past century. Multiple energy-momentum models have been advanced, each, under certain conditions, agreeing with experimental observation and mathematically consistent with classical electromagnetism. The modern view is that the various formulations of electrodynamics represent different divisions of the total energy-momentum tensor, with the separation of field and matter being ambiguous. Recently, a proposed view of photon momentum identified two leading forms as the kinetic and canonical momenta. The Abraham momentum is responsible for the overall center-of-mass translation of a material, while the Minkowski momentum is responsible for translations with respect to the surrounding medium. However, the Abraham momentum corresponds to multiple, unique electromagnetic energy-momentum tensors that attempt to separate field from material responses (e.g. Abraham, Chu, and Einstein-Laub). However, only the form of the kinetic momentum density has been revealed, while the formulation that uniquely separates the kinetic stress tensor has remained ambiguous. In this correspondence, multiple formulations are considered within the framework of relativistic electrodynamics. We apply various mathematical techniques to identify the kinetic subsystem of electrodynamics. While optical manipulation is usually modeled using a stationary medium approximation, the lessons from relativistic electrodynamics reveal a specific distribution of electromagnetic stress in media. The physics of optical and static manipulation of dielectric particles are described within this framework.

  10. Optical characterization platform for transparent insulation materials in solar energy

    Science.gov (United States)

    Platzer, Werner J.

    1994-09-01

    The precise optical characterization of transparent insulation materials used in windows, flat- plate collectors or for transparent insulation of buildings, is an important step to design solar collector and daylighting systems with these materials and to estimate energy benefits, peak loads, efficiencies, and different potential risks such as overheating, thermal damage or glare. Physically the aim is clear: Angle-dependent transmittance and reflectance properties for the solar and visible wavelength ranges yield the necessary information for the engineer to enable him to design a good system. However, it is far from trivial to obtain these data with sufficient precision for the rather different materials. The class of TIMs poses mainly the following problems, originating in their special character. TIMs often: (a) have a rather coarse structure, (b) show considerable scattering, (c) are relatively thick, (d) are spectrally selective, (e) and are not always rotationally symmetric. Therefore the optical measurement process has to: (a) integrate over a relatively large sample area (b) be able to detect intensity scattered in the sample (c) take into account the complex structure of the sample (d) and weight the different spectral bands correctly. We have set-up a set of radiation sources and integrating detector spheres which are able to measure directional-hemispherical and hemispherical-hemispherical reflectance and transmittance (hence also absorptance) for the visible and the solar wavelength range. This was possible by applying a PTFE-based coating to the spheres, having a unique spectrally flat response over the whole range, and using non-selective broadband detectors. Careful design tried to optimize integrating sphere geometry. Moreover, spectral measurements between 285-1100 nm are possible with an optical multichannel analyzer utilizing glass fiber optics. The whole experimental set-up will be presented and discussed together with representative results.

  11. Optical investigation of the propagation of the amorphous-crystalline boundary in ion-beam irradiated LiNbO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Olivares, J. [Instituto de Optica ' Daza de Valdes' , CSIC, Serrano 121, 28006 Madrid (Spain); Garcia, G. [Centro de Microanalisis de Materiales, CMAM-UAM, Parque Cientifico de Madrid, Cantoblanco, E-28049 Madrid (Spain); Agullo-Lopez, F. [Centro de Microanalisis de Materiales, CMAM-UAM, Parque Cientifico de Madrid, Cantoblanco, E-28049 Madrid (Spain); Departamento de Fisica de Materiales, C-IV, Universidad Autonoma de Madrid, Cantoblanco, 28049 Madrid (Spain); Agullo-Rueda, F. [Instituto de Ciencia de Materiales de Madrid, CSIC, Cantoblanco, E-28049 Madrid (Spain); Soares, J.C. [Centro de Fisica Nuclear da Universidade de Lisboa, P-1649-003 Lisbon (Portugal); Kling, A. [Instituto Tecnologico e Nuclear (ITN), P-2685 Sacavem (Portugal)

    2006-01-15

    The effects of high-energy silicon (5 MeV, 7.5 MeV and 30 MeV) irradiations have been optically investigated by the dark-mode m-lines technique. In all cases, an optically isotropic homogeneous layer is created after a certain critical fluence that depends on ion and energy. The structure of the layer has been investigated by micro-Raman spectroscopy and RBS/channeling. The inner boundary of the layer separating the amorphous and crystalline regions moves into the crystal on increasing fluence. The results are discussed based on the occurrence of a sharp threshold in the electronic stopping power leading to the formation of overlapped latent (amorphous) tracks.

  12. New Organic Semiconductor Materials Applied in Organic Photovoltaic and Optical Devices

    National Research Council Canada - National Science Library

    Andre F. S. Guedes; Vilmar P. Guedes; Simone Tartari; Mônica L. Souza; Idaulo J. Cunha

    2015-01-01

    The development of flexible organic photovoltaic solar cells, using an optically transparent substrate material and organic semiconductor materials, has been widely utilized by the electronic industry...

  13. Optical Studies on Antimonide Superlattice Infrared Detector Material

    Science.gov (United States)

    Hoglund, Linda; Soibel, Alexander; Hill, Cory J.; Ting, David Z.; Khoshakhlagh, Arezou; Liao, Anna; Keo, Sam; Lee, Michael C.; Nguyen, Jean; Mumolo, Jason M.; hide

    2010-01-01

    In this study the material quality and optical properties of type II InAs/GaSb superlattices are investigated using transmission and photoluminescence (PL) spectroscopy. The influence of the material quality on the intensity of the luminescence and on the electrical properties of the detectors is studied and a good correlation between the photodetector current-voltage (IV) characteristics and the PL intensity is observed. Studies of the temperature dependence of the PL reveal that Shockley-Read-Hall processes are limiting the minority carrier lifetime in both the mid-IR wavelength and the long-IR wavelength detector material studied. These results demonstrate that PL spectroscopy is a valuable tool for optimization of infrared detectors.

  14. Extreme Spectroscopy: In situ nuclear materials behavior from optical data

    Energy Technology Data Exchange (ETDEWEB)

    Guimbretiere, G.; Canizares, A.; Raimboux, N.; Omnee, R.; Duval, F.; Ammar, M.R.; Simon, P. [CNRS - UPR3079 CEMHTI, Universite d' Orleans, 45071Orleans cedex 2 (France); Desgranges, L.; Mohun, R. [CEA, DEN, DEC, F-13108 Saint-Paul-Lez-Durance (France); Jegou, C.; Magnin, M. [CEA/DTCD/SECM/LMPA, Marcoule 30207 Bagnols Sur Ceze (France); Clavier, N.; Dacheux, N. [ICSM-UMR5257 CEA/CNRS/UM2/ENSCM, Marcoule, BP17171, 30207 Bagnols sur Ceze (France)

    2015-07-01

    In the nuclear industry, materials are regularly exposed to high temperature or/and irradiation and a better knowledge and understanding of their behavior under such extreme conditions is a key-point for improvements and further developments. Nowadays, Raman spectroscopy begins to be well known as a promising technique in the post mortem and remote characterization of nuclear materials exposed to extreme conditions. On this topic, at ANIMMA 2013 conference, we have presented some results about its implementation in the study of model or real nuclear fuel. However, the strength of Raman spectroscopy as in situ characterization tool is mainly its ability to be implemented remotely through optical fibers. Aware of this, implementation of other optical techniques can be considered in order to gain information not only on the structural dynamics of materials but also on the electronic charge carrier populations. In this paper, we propose to present our last advances in Raman characterization of nuclear materials and enlarge to the in situ use of complementary optical spectroscopies. Emphasis will be made on the information that can be gained to the behavior of the model fuel depleted UO{sub 2} under extreme conditions of high temperature and ionic irradiation: - In Situ Raman identification of the radiolysis alteration products of UO{sub 2} in contact with water under ionic irradiation. - In Situ Raman recording of the damaged dynamic of UO{sub 2} under inert atmosphere. - In Situ Raman and photo-luminescence study of virgin and damaged UO2 at high temperature. - In Situ study of electronic charge carriers' behavior in U{sub x}Th{sub 1-x}O{sub 2} solid solutions by mean of Iono- and Thermo- luminescence under and post- ionic irradiation. (authors)

  15. Metrology and design of gradient-index optical materials

    Science.gov (United States)

    Lin, Di

    Gradient-index (GRIN) materials provide interesting ways to direct light propagation inside a bulk medium. Their application in optical systems as compact optical elements offer many advantages such as convenient form factor, unique dispersion characteristics, aberration correction capabilities, etc. With the recent technological advances in the fabrication techniques for these materials, it is reasonable to speculate that arbitrary refract index distributions in GRIN media can be realized in the near future. The integration of GRIN components into optical systems requires accurate knowledge of their refractive index distribution. Numerical methods for recovering the refractive index of the material using boundary value measurements of position and slope for interrogating rays that transit the medium are described. For one-dimensional index profiles, we develop a bootstrap algorithm for recovering the refractive index in successive regions of the overall profile from the boundary value data. We then compare the reconstructed index profile obtained in this method with that of a different method based on ray displacement and show good agreement in computer simulation as well as in experimental measurement. In the case of two-dimensional refractive index distributions, we show that the path integrals describing beam deflection inside the material can be cast in the form of linear algebraic equations using a simplifying assumption that decouples unknown ray trajectories inside the medium from the refractive index. The resulting linear system is inverted numerically to recover the refractive index distribution, and the ray trajectories are subsequently ascertained through an iterative ray trace procedure. Using boundary values of ray position and slope generated from a numerical ray trace, we show that this method can achieve RMS index errors less than 0.5% of the refractive index range. In addition, we explore the application of GRIN components in designing optical

  16. Computational Modeling of Ultrafast Pulse Propagation in Nonlinear Optical Materials

    Science.gov (United States)

    Goorjian, Peter M.; Agrawal, Govind P.; Kwak, Dochan (Technical Monitor)

    1996-01-01

    There is an emerging technology of photonic (or optoelectronic) integrated circuits (PICs or OEICs). In PICs, optical and electronic components are grown together on the same chip. rib build such devices and subsystems, one needs to model the entire chip. Accurate computer modeling of electromagnetic wave propagation in semiconductors is necessary for the successful development of PICs. More specifically, these computer codes would enable the modeling of such devices, including their subsystems, such as semiconductor lasers and semiconductor amplifiers in which there is femtosecond pulse propagation. Here, the computer simulations are made by solving the full vector, nonlinear, Maxwell's equations, coupled with the semiconductor Bloch equations, without any approximations. The carrier is retained in the description of the optical pulse, (i.e. the envelope approximation is not made in the Maxwell's equations), and the rotating wave approximation is not made in the Bloch equations. These coupled equations are solved to simulate the propagation of femtosecond optical pulses in semiconductor materials. The simulations describe the dynamics of the optical pulses, as well as the interband and intraband.

  17. Experimental and Numerical Studies of Thermal Lensing in Optical Materials

    Science.gov (United States)

    Franklin, Samantha

    2010-10-01

    A common issue found in near-IR laser applications with multi kW beams is thermo-optical effects due to small levels of absorption of the optical material used in the beam train elements. To validate current beam propagation codes for this application, a closed-aperture Z-scan experiment was performed. Commercially available NG11 and NG4 (Schott glass) absorptive neutral density filters were used as the sample with optical densities ranging from 0.1-0.5. They were exposed with a 532 nm beam at 100mW power for 1 s at different z-positions in the optical path. The experimental parameters were entered into the computer model and the irradiance vs. position (in meters) of the computer model output data was compared to the graph of normalized irradiance vs. z-position (in meters) of the Z-scan experiment. Experimentally measured values were compared to calculations from the laser propagation model; the results of this comparison showed that the modeling program is a proper measuring tool in the outcome of a thermal lensing experiment. Public Release Code: AFRL-RH-AB-2010-0043 PA# 10-350

  18. Improving the optical and crystalline properties on CdS thin films growth on small and large area by using CBD technique

    Energy Technology Data Exchange (ETDEWEB)

    Albor A, M. L.; Flores M, J. M.; Hernandez V, C.; Contreras P, G.; Mejia G, C.; Rueda M, G. [IPN, Escuela Superior de Fisica y Matematicas, Departamento de Fisica, Unidad Profesional Adolfo Lopez Mateos, Zacatenco, 07738 Ciudad de Mexico (Mexico); Gonzalez T, M. A. [IPN, Escuela Superior de Computo, Departamento de Formacion Basica, Unidad Profesional Adolfo Lopez Mateos, 07738 Ciudad de Mexico (Mexico)

    2016-11-01

    CdS polycrystalline thin films have been used as window layer in solar cells; the optical and crystalline quality of the CdS-partner plays and important role in the photovoltaic device performance. CdS thin films were deposited by using Chemical Bath Deposition. The SnO{sub 2}:F substrates used were chemically treated with HCl (0.1 M) and others were thermally annealed in different atmospheres (Ar and O{sub 2}). The physical properties of CdS thin films were influenced by the HCl treatment, position, size and the substrates movement inside the reaction beaker. The CdS samples were deposited in areas of 4 cm{sup 2}, 50 cm{sup 2} and 100 cm{sup 2}. Finally CdS thin films with thickness of 35-300 nm with good optical and crystalline quality on a uniform morphology were obtained. Transmittance values were obtained for all samples about 85-90 % with an average of gap energy of 2.5 eV. The structural characteristics of the samples were determined by the X-ray diffraction patterns, by means of a D-500 Siemens X-ray system. (Author)

  19. Surface properties, crystallinity and optical properties of anodised titanium in mixture of β-glycerophosphate (β-GP) and calcium acetate (CA)

    Energy Technology Data Exchange (ETDEWEB)

    Chuan, Lee Te, E-mail: gd130079@siswa.uthm.edu.my; Abdullah, Hasan Zuhudi, E-mail: hasan@uthm.edu.my; Idris, Maizlinda Izwana, E-mail: izwana@uthm.edu.my [Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Batu Pahat, Johor (Malaysia)

    2015-07-22

    Anodic oxidation is an electrochemical method for the production of ceramic films on a metallic substrate. It had been widely used to deposit the ceramic coatings on the metals surface. This method has been widely used in surface modification of biomaterials especially for dental implants. In this study, the surface morphology, crystallinity and optical properties of titanium foil was modified by anodising in mixture of β-glycerophosphate disodium salt pentahydrate (β-GP) and calcium acetate monohydrate (CA). The experiments were carried out at high voltage (350 V), different anodising time (5 and 10 minutes) and current density (10-70 mA.cm{sup −2}) at room temperature. Anodised titanium was characterised by using field emission scanning electron microscopy (FESEM), X-ray diffractometer (XRD), and UV-Vis spectrometry. The result of the experiment showed that surface morphology, crystallinity and optical properties depended strongly on the current density and anodising time. More porous surface and large amount of anatase and rutile was produced at higher current density and longer anodising time. Apart from that, it is also revealed that the energy band gap of anodised titanium increases as the increase in current density due to the presence of anatase and rutile TiO{sub 2}.

  20. Surface properties, crystallinity and optical properties of anodised titanium in mixture of β-glycerophosphate (β-GP) and calcium acetate (CA)

    Science.gov (United States)

    Chuan, Lee Te; Abdullah, Hasan Zuhudi; Idris, Maizlinda Izwana

    2015-07-01

    Anodic oxidation is an electrochemical method for the production of ceramic films on a metallic substrate. It had been widely used to deposit the ceramic coatings on the metals surface. This method has been widely used in surface modification of biomaterials especially for dental implants. In this study, the surface morphology, crystallinity and optical properties of titanium foil was modified by anodising in mixture of β-glycerophosphate disodium salt pentahydrate (β-GP) and calcium acetate monohydrate (CA). The experiments were carried out at high voltage (350 V), different anodising time (5 and 10 minutes) and current density (10-70 mA.cm-2) at room temperature. Anodised titanium was characterised by using field emission scanning electron microscopy (FESEM), X-ray diffractometer (XRD), and UV-Vis spectrometry. The result of the experiment showed that surface morphology, crystallinity and optical properties depended strongly on the current density and anodising time. More porous surface and large amount of anatase and rutile was produced at higher current density and longer anodising time. Apart from that, it is also revealed that the energy band gap of anodised titanium increases as the increase in current density due to the presence of anatase and rutile TiO2.

  1. Combined Effect of Mechanical Grooving and Stain-Etched Surface on Optical and Electrical Properties of Crystalline Silicon Substrates

    Science.gov (United States)

    Zarroug, Ahmed; Derbali, Lotfi; Ouertani, Rachid; Dimassi, Wissem; Ezzaouia, Hatem

    2014-05-01

    This paper investigates the combined effect of mechanical grooving and porous silicon (PS) on the front surface reflectance and the electronic properties of crystalline silicon substrates. Mechanical surface texturization leads to reduce the cell reflectance, enhance the light trapping and augment the carrier collection probability. PS was introduced as an efficient antireflective coating (ARC) onto the front surface of crystalline silicon solar cell. Micro-periodic V-shaped grooves were made by means of a micro-groove machining process prior to junction formation. Subsequently, wafers were subjected to an isotropic potassium hydroxide (KOH) etching so that the V-shape would be turned to a U-shape. We found that the successive treatment of silicon surfaces with stain-etching, grooving then alkaline etching enhances the absorption of the textured surface, and decreases the reflectance from 35% to 7% in the 300-1200 nm wavelength range. We obtained a significant increase in the overall light path that generates the building up of the light trapping inside the substrate. We found an improvement in the illuminated I-V characteristics and an increase in the minority carrier lifetime τeff. Such a simple method was adopted to effectively reinforce the overall device performance of crystalline silicon-based solar cells.

  2. Cryogenic Q-factor measurement of optical substrate materials

    Energy Technology Data Exchange (ETDEWEB)

    Nietzsche, S; Nawrodt, R; Zimmer, A; Thuerk, M; Vodel, W; Seidel, P [Institut fuer Festkoerperphysik, Friedrich-Schiller-Universitaet Jena, Helmholtzweg 5, 07743 Jena (Germany)

    2006-03-02

    Upcoming generations of interferometric gravitational wave detectors are likely to be operated at cryogenic temperatures because one of the sensitivity limiting factors of the present generation is the thermal noise of optical components (e.g. end mirrors, cavity couplers, beam splitters). The main contributions to this noise are due to the substrate, the optical coating, and the suspension. The thermal noise can be reduced by cooling to cryogenic temperatures. In addition the overall mechanical quality factor should preferable increase at low temperatures. The experimental details of a new cryogenic apparatus for investigations of the temperature dependency of the Q-factor of several substrate materials in the range of 5 to 300 K are presented. To perform a ring down recording an electrostatic mode excitation of the samples and an interferometric read-out of the amplitude of the vibrations was used.

  3. Research on lunar materials. [optical, chemical, and electrical properties

    Science.gov (United States)

    Gold, T.

    1978-01-01

    Abstracts of 14 research reports relating to investigations of lunar samples are presented. The principal topics covered include: (1) optical properties of surface and core samples; (2) chemical composition of the surface layers of lunar grains: Auger electron spectroscopy of lunar soil and ground rock samples; (3) high frequency electrical properties of lunar soil and rock samples and their relevance for the interpretation of lunar radar observations; (4) the electrostatic dust transport process; (5) secondary electron emission characteristics of lunar soil samples and their relevance to the dust transportation process; (6) grain size distribution in surface soil and core samples; and (7) the optical and chemical effects of simulated solar wind (2keV proton and a particle radiation) on lunar material.

  4. Separation of lanthanum, hafnium, barium and radiotracers yttrium-88 and barium-133 using crystalline zirconium phosphate and phosphonate compounds as prospective materials for a Ra-223 radioisotope generator

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, Teresia [Lynntech Inc., 7610 Eastmark Dr, College Station, TX 77840 (United States); Bestaoui, Naima, E-mail: Naima.Bestaoui@Lynntech.co [Lynntech Inc., 7610 Eastmark Dr, College Station, TX 77840 (United States); Wierzbicki, Melissa; Adams, Todd; Clearfield, Abraham [Lynntech Inc., 7610 Eastmark Dr, College Station, TX 77840 (United States)

    2011-07-15

    Crystalline hybrid organic/inorganic ion exchangers based on zirconium phosphate and phosphonate compounds were evaluated for application in radium-223 generator for radiopharmaceutical applications. Various compositions were synthesized and the selectivity of these materials was determined for inactive lanthanum, hafnium and barium, and radiotracers yttrium-88 and barium-133. The hybrid materials show very efficient lanthanum/barium separation; the response for zirconium phosphate was even better. A small-scale column loaded with pelletized zirconium phosphate compound demonstrated excellent retention of {sup 88}Y and release of {sup 133}Ba.

  5. Structural, optical, thermal and mechanical characterization of an organic nonlinear optical material: 4-methyl-3-nitrobenzoic acid single crystal

    Science.gov (United States)

    Bharathi, M. Divya; Ahila, G.; Mohana, J.; Chakkaravarthi, G.; Anbalagan, G.

    2016-11-01

    Organic single crystals of 4-methyl-3-nitrobenzoic acid (4M3N) have been grown by slow evaporation solution growth technique at room temperature. The single crystal X-ray diffraction study reveals that 4M3N crystallizes in monoclinic system with space group P21/n. The crystalline perfection of the crystal was analyzed by high resolution X-ray diffraction (HRXRD) measurements. The functional groups present in 4M3N have been identified from FT-IR and FT-Raman spectra. The lower cut-off wavelength of 4M3N is found to be 404 nm and the optical band gap is calculated as 2.91 eV. The refractive index shows normal behavior with wavelength. The physio chemical changes, decomposition and stability of the 4M3N compound were established by TG-DTA studies. Vickers microhardness measurement concludes that 4M3N belongs to soft material (n=2.5) category. The LDT value is found to be higher than that of KDP and some of the important organic NLO materials. The third order nonlinear refractive index and nonlinear absorption coefficient of the 4M3N have been measured by Z-scan studies. The imaginary and real parts of the third-order susceptibility values were determined as Im χ3=9.129×10-11 esu and Re χ3=1.4034×10-9 esu respectively. The dislocation density was calculated to be 3.0448×106 cm-2 which indicates the quality of the crystal.

  6. Material optimization for electro-optic modulation and cascading

    Science.gov (United States)

    Reyes, Jorge; Darracq, Bruno; Canva, Michael; Blanchard-Desce, Mireille H.; Chaput, Frederic; Lahlil, Khalid; Boilot, Jean-Pierre; Brun, Alain; Levy, Yves

    2000-11-01

    A large effort has been devoted to the preparation of organic polymeric materials for electro-optic modulation and more recently for cascading based processes. These materials contain push-pull chromophores either incorporated as guest in a high Tg polymeric matrix (doped polymers) or grafted onto the polymeric matrix. These systems present several advantages but require significant improvement at the molecular level- by designing optimized chromophores with very large molecular figure of merit specific to each application targeted. The sol-gel route was used to prepare hybrid organic-inorganic materials, for the fabrication of amorphous solids of various shapes (bulk, think films...). The results obtained on optimized chromophore-doped poled thin films emphasize that intermolecular interactions have to be taken into account, as already pointed out by Dalton and coworkers. By combining a molecular engineering strategy for getting large molecular figure of merit and by controlling the intermolecular dipole-dipole interactions via both tuning the push-pull chromophore concentration and the incorporation screening carbazole moieties in high concentration. This strategy allows us to obtain a r33 of about 50 pm/V at 831 nm for a new optimized chromophore structure. In parallel, these thin films are being processed to be used as passive components for integrated optics.

  7. Characterization of single crystalline ZnTe and ZnSe grown by vapor phase transport

    Energy Technology Data Exchange (ETDEWEB)

    Trigubo, A B; Di Stefano, M C [FRBA-UTN, (1179) Buenos Aires (Argentina); Aguirre, M H [Dpto de Quim Inorg, Fac de Cs Quim, Univ Complutense, (28040) Madrid (Spain); Martinez, A M; D' Elia, R; Canepa, H; Heredia, E, E-mail: atrigubo@citefa.gov.a [CINSO-CITEFA: (1603) Villa Martelli, Pcia de Buenos Aires (Argentina)

    2009-05-01

    Tubular furnaces were designed and built to obtain single crystalline ZnTe and ZnSe ingots using respectively physical and chemical transport methods. Different temperature profiles and growth rates were analyzed in order to optimize the necessary crystalline quality for device development. Optical and scanning electron micrographs of the corrosion figures produced by chemical etching were used to obtain the dislocation density and the misorientation between adjacent subgrains in ZnTe and ZnSe wafers. Structural quality of the single crystalline material was determined by transmission electronic microscopy. Optical transmittance was measured by infrared transmission spectrometry and the resulting values were compared to commercial samples.

  8. Structure/property relationships in non-linear optical materials

    Energy Technology Data Exchange (ETDEWEB)

    Cole, J.M. [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France)]|[Durham Univ. (United Kingdom); Howard, J.A.K. [Durham Univ. (United Kingdom); McIntyre, G.J. [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France)

    1997-04-01

    The application of neutrons to the study of structure/property relationships in organic non-linear optical materials (NLOs) is described. In particular, charge-transfer effects and intermolecular interactions are investigated. Charge-transfer effects are studied by charge-density analysis and an example of one such investigation is given. The study of intermolecular interactions concentrates on the effects of hydrogen-bonding and an example is given of two structurally similar molecules with very disparate NLO properties, as a result of different types of hydrogen-bonding. (author). 3 refs.

  9. Influence of surfactant and annealing temperature on optical properties of sol-gel derived nano-crystalline TiO2 thin films.

    Science.gov (United States)

    Vishwas, M; Sharma, Sudhir Kumar; Rao, K Narasimha; Mohan, S; Gowda, K V Arjuna; Chakradhar, R P S

    2010-03-01

    Titanium dioxide thin films have been synthesized by sol-gel spin coating technique on glass and silicon substrates with and without surfactant polyethylene glycol (PEG). XRD and SEM results confirm the presence of nano-crystalline (anatase) phase at an annealing temperature of 300 degrees C. The influence of surfactant and annealing temperature on optical properties of TiO(2) thin films has been studied. Optical constants and film thickness were estimated by Swanepoel's (envelope) method and by ellipsometric measurements in the visible spectral range. The optical transmittance and reflectance were found to decrease with an increase in PEG percentage. Refractive index of the films decreased and film thickness increased with the increase in percentage of surfactant. The refractive index of the un-doped TiO(2) films was estimated at different annealing temperatures and it has increased with the increasing annealing temperature. The optical band gap of pure TiO(2) films was estimated by Tauc's method at different annealing temperature.

  10. 宽温域蓝相液晶材料%Wide Temperature Range Blue Phase Liquid Crystalline Materials

    Institute of Scientific and Technical Information of China (English)

    何万里; 王玲; 王乐; 崔晓鹏; 谢谟文; 杨槐

    2012-01-01

    Blue phases (BPs) are mesophases usually exhibited by highly chiral materials and commonly occur in a narrow temperature range below the isotropic phase. They are optically active and non-birefringent, while exhibit Bragg diffraction of light in the visible wavelength. Recently, BPs have attracted growing attention in the field of optoelectronics and photonics. This paper reviews the recent research advances in BPs liquid crystals, also with a brief introduction of the history of the blue phase studies, and some special properties, especially the frustration in the double twist molecular alignment. Finally, the current challenges for applications of BPs materials are highlighted, and the focus of future research and development are proposed%蓝相常在高手性液晶体系的清亮点附近温度区间出现,由于具有优异的光学特性如无双折射现象和选择性反射可见光等,近年来蓝相在光电和光子领域越来越受到人们的关注。本文综述了蓝相的发现、分子排列和光学特性等,详细介绍了宽温域蓝相液晶材料在国内外的研究进展和应用现状。最后分析了蓝相液晶用于平板显示领域在技术方面存在的主要问题和未来发展方向。

  11. Optical fiber sensors for damage analysis in aerospace materials

    Science.gov (United States)

    Schindler, Paul; May, Russell; Claus, Richard

    1995-01-01

    Under this grant, fiber optic sensors were investigated for use in the nondestructive evaluation of aging aircraft. Specifically, optical fiber sensors for detection and location of impacts on a surface, and for detection of corrosion in metals were developed. The use of neural networks was investigated for determining impact location by processing the output of a network of fiberoptic strain sensors distributed on a surface. This approach employs triangulation to determine location by comparing the arrival times at several sensors, of the acoustic signal generated by the impact. For this study, a neural network simulator running on a personal computer was used to train a network using a back-propagation algorithm. Fiber optic extrinsic Fabry-Perot interferometer (EFPI) strain sensors are attached to or embedded in the surface, so that stress waves emanating from an impact can be detected. The ability of the network to determine impact location by time-or-arrival of acoustic signals was assessed by comparing network outputs with actual experimental results using impacts on a panel instrumented with optical fiber sensors. Using the neural network to process the sensor outputs, the impact location can be inferred to centimeter range accuracy directly from the arrival time data. In addition, the network can be trained to determine impact location, regardless of material anisotropy. Results demonstrate that a back-propagation network identifies impact location for an anisotropic graphite/bismaleimide plate with the same accuracy as that for an isotropic aluminum plate. Two different approaches were investigated for the development of fiber optic sensors for corrosion detection in metals, both utilizing optical fiber sensors with metal coatings. In the first approach, an extrinsic Fabry-Perot interferometric fiber optic strain sensor was placed under tensile stress, and while in the resulting strained position, a thick coating of metal was applied. Due to an increase in

  12. All-optical switching in subwavelength metallic grating structure containing nonlinear optical materials.

    Science.gov (United States)

    Min, Changjun; Wang, Pei; Chen, Chunchong; Deng, Yan; Lu, Yonghua; Ming, Hai; Ning, Tingyin; Zhou, Yueliang; Yang, Guozhen

    2008-04-15

    All-optical switching based on a subwavelength metallic grating structure containing nonlinear optical materials has been proposed and numerically investigated. Metal-dielectric composite material is used in the switching for its larger third-order nonlinear susceptibility (approximately 10(-7)esu) and ultrafast response properties. The calculated dependence of the signal light intensity on the pump light intensity shows a bistable behavior, which results in a significant switch effect. It rests on a surface plasmon's enhanced intensity-dependent change of the effective dielectric constant of Kerr nonlinear media, corresponding to a transition of the far-field transmission from a low- to high-transmission state. The study of this switching structure shows great advantages of smaller size, lower requirement of pump light intensity, and shorter switching time at approximately the picosecond level.

  13. L-Cystine hydrochloride: A novel semi-organic nonlinear optical material for optical devices

    Science.gov (United States)

    Selvaraju, K.; Valluvan, R.; Kirubavathi, K.; Kumararaman, S.

    2007-01-01

    A new semi-organic nonlinear optical (NLO) material L-cystine hydrochloride (LCHCl) was grown in large size measuring 19 × 5 × 3 mm 3 by slow solvent evaporation technique for the first time in literature. The cell parameter values were determined by single crystal X-ray diffraction studies. Fourier Transform Infrared spectroscopic analysis was carried out on the grown sample to ascertain the fundamental functional groups. Thermal behavior of the grown LCHCl sample was analyzed by TG & DTA analysis. The mechanical properties of the grown crystals have been studied using Vickers microhardness tester. The optical transmission studies and second harmonic generation (SHG) efficiency studies justified the device quality of the grown crystal and the SHG study reveals that the grown sample has nearly 1.2 times higher efficiency than that of potassium dihydrogen phosphate (KDP), a well known NLO material.

  14. Optical Material Researches for Frontier Optical Ceramics and Visible Fiber Laser Technologies

    Science.gov (United States)

    2016-07-07

    AM2A.2, 27 October - 01 November 2013, Paris Marriott Rive Gauche Hotel and Convention Center, Paris, France. 2) “ Development on advanced functional...DISTRIBUTION/AVAILABILITY STATEMENT A DISTRIBUTION UNLIMITED: PB Public Release 13. SUPPLEMENTARY NOTES 14. ABSTRACT We have successfully developed a new...are very useful for scientific and industrial applications. 15. SUBJECT TERMS Fibre Lasers, Laser Dynamics, Nonlinear Optical Materials 16. SECURITY

  15. Micro-optical elements and optical materials of certain spider webs

    Science.gov (United States)

    Kane, D. M.; Naidoo, N.; Little, D. J.

    2012-06-01

    Certain spider webs are composed of several types of micro-optical elements made from transparent optical materials. The silks (radial and capture) are almost exclusively protein. The nearly cylindrical silks have diameters in the range 0.1 to several microns and cross-sectional morphology that is cylindrical-multi-layered,.as studied by transmission electron microscopy, The capture threads are coated with aqueous adhesive that also forms into nearly elliptical micro-lenses (adhesive droplets) mounted on the near cylindrical silks. The remaining elements of the web are the cement junctions tying the radial and the capture threads of the web together. These are irregularly shaped platelets. Progress to date on our research characterizing the optical properties and function of these transparent orb webs has been to interpret the reflection and transmission properties of the elements of the web, and the web as a whole, in natural lighting; to evaluate the optical finish of the surface of the silks and capture droplets; and to measure the principal refractive indices of radial silks using new immersion based methods developed for application to micron-sized, curved optical elements. Here we report the principal refractive indices, birefringence, dispersion and morphology of transparent spider silk subject to various chemical treatments. The morphology is measured using TEM. Insight into the physical origin of the refractive index properties will be discussed.

  16. Low temperature thermal expansion measurements on optical materials.

    Science.gov (United States)

    Browder, J S; Ballard, S S

    1969-04-01

    A three-terminal capacitance type dilatometer has been developed for investigating the thermal expansion of optical materials at low temperatures. The method is applicable when only small sample lengths (13 mm or less) are available. The thermal expansion coefficients of six polycrystalline materials (the Irtrans) and of one nonoxide glass have been determined in the range from room temperature down to about 60 K. Minute changes of the length of a sample produce a change of the spacing of a parallel plate capacitor with guard ring; the resulting change of capacitance is measured on a highly sensitive bridge. The expansion coefficients are then determined by relating the change of capacitance to the change of dimensions of the sample.

  17. Materials and Reliability Handbook for Semiconductor Optical and Electron Devices

    CERN Document Server

    Pearton, Stephen

    2013-01-01

    Materials and Reliability Handbook for Semiconductor Optical and Electron Devices provides comprehensive coverage of reliability procedures and approaches for electron and photonic devices. These include lasers and high speed electronics used in cell phones, satellites, data transmission systems and displays. Lifetime predictions for compound semiconductor devices are notoriously inaccurate due to the absence of standard protocols. Manufacturers have relied on extrapolation back to room temperature of accelerated testing at elevated temperature. This technique fails for scaled, high current density devices. Device failure is driven by electric field or current mechanisms or low activation energy processes that are masked by other mechanisms at high temperature. The Handbook addresses reliability engineering for III-V devices, including materials and electrical characterization, reliability testing, and electronic characterization. These are used to develop new simulation technologies for device operation and ...

  18. (Bio)hybrid materials based on optically active particles

    Science.gov (United States)

    Reitzig, Manuela; Härtling, Thomas; Opitz, Jörg

    2014-03-01

    In this contribution we provide an overview of current investigations on optically active particles (nanodiamonds, upconversion phospors) for biohybrid and sensing applications. Due to their outstanding properties nanodiamonds gain attention in various application elds such as microelectronics, optical monitoring, medicine, and biotechnology. Beyond the typical diamond properties such as high thermal conductivity and extreme hardness, the carbon surface and its various functional groups enable diverse chemical and biological surface functionalization. At Fraunhofer IKTS-MD we develop a customization of material surfaces via integration of chemically modi ed nanodiamonds at variable surfaces, e.g bone implants and pipelines. For the rst purpose, nanodiamonds are covalently modi ed at their surface with amino or phosphate functionalities that are known to increase adhesion to bone or titanium alloys. The second type of surface is approached via mechanical implementation into coatings. Besides nanodiamonds, we also investigate the properties of upconversion phosphors. In our contribution we show how upconversion phosphors are used to verify sterilization processes via a change of optical properties due to sterilizing electron beam exposure.

  19. Optical and electrical phenomena in dielectric materials under irradiation

    CERN Document Server

    Plaksin, O A; Stepanov, P A; Demenkov, P V; Chernov, V M; Krutskikh, A O

    2002-01-01

    Optical and acoustic properties of the materials based on Al sub 2 O sub 3 , SiO sub 2 and BN under 8 MeV proton irradiation (<10 sup 4 Gy/s) have been measured. Electric charge partitioning has been shown to result in charging the microscopic regions in the bulk of the dielectrics under irradiation, which is due to different mobility of free electrons and holes (sapphire), concentration inhomogeneity in the system of charge carrier traps (alumina), or thermodynamic instability of the homogeneous distribution of the filled traps (silica glasses). Prevalent charge carrier recombination in the grain boundaries causes re-crystallization of pyrolytic boron nitride under irradiation, which shows up as simultaneous decrease of the intensity of radiation-induced luminescence (RIL) of the centres in the grain boundaries and the BN. The local charging results in optical inhomogeneity of the silica glasses which is sustained by the optical loss spectra of the irradiated glasses, features of kinetics of bleaching, RI...

  20. New Optical Sensing Materials for Application in Marine Research

    Science.gov (United States)

    Borisov, S.; Klimant, I.

    2012-04-01

    Optical chemosensors are versatile analytical tools which find application in numerous fields of science and technology. They proved to be a promising alternative to electrochemical methods and are applied increasingly often in marine research. However, not all state-of-the- art optical chemosensors are suitable for these demanding applications since they do not fully fulfil the requirements of high luminescence brightness, high chemical- and photochemical stability or their spectral properties are not adequate. Therefore, development of new advanced sensing materials is still of utmost importance. Here we present a set of novel optical sensing materials recently developed in the Institute of Analytical Chemistry and Food Chemistry which are optimized for marine applications. Particularly, we present new NIR indicators and sensors for oxygen and pH which feature high brightness and low level of autofluorescence. The oxygen sensors rely on highly photostable metal complexes of benzoporphyrins and azabenzoporphyrins and enable several important applications such as simultaneous monitoring of oxygen and chlorophyll or ultra-fast oxygen monitoring (Eddy correlation). We also developed ulta-sensitive oxygen optodes which enable monitoring in nM range and are primary designed for investigation of oxygen minimum zones. The dynamic range of our new NIR pH indicators based on aza-BODIPY dyes is optimized for the marine environment. A highly sensitive NIR luminescent phosphor (chromium(III) doped yttrium aluminium borate) can be used for non-invasive temperature measurements. Notably, the oxygen, pH sensors and temperature sensors are fully compatible with the commercially available fiber-optic readers (Firesting from PyroScience). An optical CO2 sensor for marine applications employs novel diketopyrrolopyrrol indicators and enables ratiometric imaging using a CCD camera. Oxygen, pH and temperature sensors suitable for lifetime and ratiometric imaging of analytes

  1. Thioborates: potential nonlinear optical materials with rich structural chemistry.

    Science.gov (United States)

    Lian, Yu-Kun; Wu, Li-Ming; Chen, Ling

    2017-03-27

    Nonlinear optical (NLO) crystal materials with good performance are urgently needed. Various compounds have been explored to date. Metal chalcogenides and borates are common sources of potential NLO materials with desirable properties, particularly in the IR and UV regions, respectively. However, these two types of crystals have their specific drawbacks. Thioborates, as an emerging system, have unique advantages by combining the merits of borates and sulfides, i.e., the high laser damage thresholds and rich structural diversity of borates with large optical nonlinearity and the favorable transparency range of sulfides. However, only a limited number of thioborates are known. This paper summarizes the known thioborates according to structural motifs that range from zero-dimension to three-dimension, most of which are formed by sharing corners of the basic building units (BS3)(3-) and (BS4)(5-). Although nearly one-third of the known thioborates are noncentrosymmetric, most of their properties, especially their NLO behaviors, are unexplored. Further attempts and additional investigations are required with respect to design syntheses, property improvements and micro-mechanism studies.

  2. Optical studies of dynamical processes in disordered materials

    Energy Technology Data Exchange (ETDEWEB)

    Yen, W.M.

    1991-07-01

    In general terms, our research activities under the present Agency sponsorship continue to focus on processes and interactions which affect the dynamical behavior of excitations/excited states of optically activated amorphous or disordered solids. The framework of our understanding of these processes has been established with work performed over the past two decades. The advent of more refined spectroscopies, most of them laser based, has allowed a re-examination of these properties in a much more detailed and basic way. A deeper understanding of the interactions which lead to relaxation, energy diffusion and nonlinearities in the disordered phases is important to the development of more efficient and better materials to service all of the technologies which employ optically activated materials. In this document, we will present an abbreviated synopsis of the research we have conducted under the auspices of the present grant. We will then outline directions we wish to maintain and will render descriptions of new opportunities which have ensued from our current efforts and which we wish to exploit under renewed sponsorship. 52 refs., 12 figs.

  3. Optical amplification in photonic integrated circuits

    NARCIS (Netherlands)

    Pollnau, Markus

    2005-01-01

    The recent results in the field of fabrication, characterization, and applications of optical waveguides in doped hard crystalline materials, specifically in Ti-doped sapphire and Yb-doped $KY(WO_4)_2$, are reviewed.

  4. Laser-matter structuration of optical and biological materials

    Energy Technology Data Exchange (ETDEWEB)

    Hallo, L., E-mail: hallo@celia.u-bordeaux1.fr [CELIA, Universite Bordeaux 1 (France); Mezel, C., E-mail: candice.mezel@cea.fr [CELIA, Universite Bordeaux 1 (France); CEA Le Ripault, 37260 Monts (France); Guillemot, F., E-mail: fabien.guillemot@inserm.fr [UMR 577 INSERM, Universite Bordeaux 2 (France); Chimier, B., E-mail: chimier@celia.u-bordeaux1.fr [CELIA, Universite Bordeaux 1 (France); Bourgeade, A., E-mail: antoine.bourgeade@cea.fr [CEA-CESTA, Le Barp (France); Regan, C., E-mail: regan@celia.u-bordeaux1.fr [CELIA, Universite Bordeaux 1 (France); Duchateau, G., E-mail: duchateau@celia.u-bordeaux1.fr [CELIA, Universite Bordeaux 1 (France); Souquet, A., E-mail: agnes.souquet@inserm.fr [UMR 577 INSERM, Universite Bordeaux 2 (France); Hebert, D., E-mail: david.hebert@cea.fr [CEA-CESTA, Le Barp (France)

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer In this study we model nanomaterial structuring. Black-Right-Pointing-Pointer The laser energy deposition is discussed first. Black-Right-Pointing-Pointer Full and approximate models are discussed. Black-Right-Pointing-Pointer Dynamic material response is addressed via hydrodynamics. Black-Right-Pointing-Pointer Sild effects are accounted for - Abstract: Interaction of ultrafast laser, i.e. from the femtosecond (fs) to the nanosecond (ns) regime, with initially transparent matter may produce very high energy density hot spots in the bulk as well as at the material surface, depending on focusing conditions. In the fs regime, absorption is due to ionisation of the dielectric, which enables absorption process to begin, and then hydrodynamic to take place. In the ns regime both absorption and hydrodynamic are coupled to each other, which complexifies considerably the comprehension but matter structuration looks similar. A numerical tool including solution of 3D Maxwell equations and a rate equation for free electrons is first compared to some available simple models of laser energy absorption. Then, subsequent material deformation, i.e. structuration, is determined by solving hydrodynamic equations, including or not solid behaviour. We show that nature of the final structures strongly depends on the amount of deposited energy and on the shape of the absorption zone. Then we address some problems related to laser-matter structuration of optical and biological materials in the fs, ps and ns regimes.

  5. Dynamic Response of Stereoblock Elastomeric Polypropylene Studied by Rheo-Optics and X-ray Scattering: 2. Orthogonally Oriented Crystalline Chains

    Energy Technology Data Exchange (ETDEWEB)

    Pople, John A

    2002-08-06

    A combination of tensile stress, rheo-optical birefringence, and wide-angle X-ray scattering (WAXS) was used to probe the dynamic response of the low-tacticity ether-soluble (ES) fraction of elastomeric polypropylene (ePP) derived from metallocene 2-arylindene hafnium catalyst. The ES fraction has isotactic pentad distribution [mmmm] = 21% and a very low amount of crystallinity ({le} 2% by differential scanning calorimetry and WAXS). In tensile stretching and step-strain shearing, ES exhibits unusual deformation behavior of crystalline chains preferentially oriented orthogonal relative to the deformation axis. Under deformation, WAXS shows arcing along the meridian axis at a scattering angle 2{theta} = 16.0{sup o} (d = 0.551 {+-} 0.002 nm) which coincides with one of the characteristic reflections of the {beta}-form; but the higher order reflection for the {beta}-form at 2{theta} = 21.3{sup o} is not observed. The meridional arcing, which signifies crystallization of the low-tacticity fraction of ePP, is also observed when ES is blended with higher tacticity fractions of ePP. The meridional arcing, however, is observed at 2{theta} = 14.0{sup o} corresponding to (110) reflection of the {alpha}-form, instead of at 2{theta} = 16.0{sup o} for the neat ES. The crystallization in the {alpha}-form offers evidence of co-crystallization of the ES fraction with the higher-tacticity components in the same crystalline form as the host matrix. We believe that the co-crystallization occurs through an epitaxial growth in the ac-faces of the {alpha}-form.

  6. Single crystalline wurtzite ZnO/zinc blende ZnS coaxial heterojunctions and hollow zinc blende ZnS nanotubes: synthesis, structural characterization and optical properties.

    Science.gov (United States)

    Huang, Xing; Willinger, Marc-Georg; Fan, Hua; Xie, Zai-lai; Wang, Lei; Klein-Hoffmann, Achim; Girgsdies, Frank; Lee, Chun-Sing; Meng, Xiang-Min

    2014-08-07

    Synthesis of ZnO/ZnS heterostructures under thermodynamic conditions generally results in the wurtzite (WZ) structure of the ZnS component because its WZ phase is thermodynamically more stable than its zinc blende (ZB) phase. In this report, we demonstrate for the first time the preparation of ZnO/ZnS coaxial nanocables composed of single crystalline ZB structured ZnS epitaxially grown on WZ ZnO via a two-step thermal evaporation method. The deposition temperature is believed to play a crucial role in determining the crystalline phase of ZnS. Through a systematic structural analysis, the ZnO core and the ZnS shell are found to have an orientation relationship of (0002)ZnO(WZ)//(002)ZnS(ZB) and [01-10]ZnO(WZ)//[2-20]ZnS(ZB). Observation of the coaxial nanocables in cross-section reveals the formation of voids between the ZnO core and the ZnS shell during the coating process, which is probably associated with the nanoscale Kirkendall effect known to result in porosity. Furthermore, by immersing the ZnO/ZnS nanocable heterojunctions in an acetic acid solution to etch away the inner ZnO cores, single crystalline ZnS nanotubes orientated along the [001] direction of the ZB structure were also achieved for the first time. Finally, optical properties of the hollow ZnS tubes were investigated and discussed in detail. We believe that our study could provide some insights into the controlled fabrication of one dimensional (1D) semiconductors with desired morphology, structure and composition at the nanoscale, and the synthesized WZ ZnO/ZB ZnS nanocables as well as ZB ZnS nanotubes could be ideal candidates for the study of optoelectronics based on II-VI semiconductors.

  7. In-situ optical emission spectroscopy diagnostic of plasma ignition impact on crystalline silicon passivation by a-Si:H films

    Science.gov (United States)

    Meddeb, Hosny; Bearda, Twan; Abdulraheem, Yaser; Dimassi, Wissem; Ezzaouia, Hatem; Gordon, Ivan; Szlufcik, Jozef; Poortmans, Jef

    2016-08-01

    The influence of the plasma ignition condition during PECVD deposition from a silane/hydrogen mixture on the amorphous silicon passivation of crystalline silicon surface is investigated. The changes in this process step mainly consist in varying the power density for very brief durations in between 1 s and 3 s. We find that the ignition phase contributes significantly in the film growth, especially in the a-Si:H/c-Si interface formation. In particular, the deposition rate increases with ignition power density. TEM cross-section inspection presents a rougher a-Si:H/c-Si interface with higher plasma power and thus, a tendency for nano-clusters formation caused by the crystalline nature of the substrate. In-situ plasma diagnostics reveal the gradual raise up of IHa*/ISiH* with the power density leading to worse SiH* abstraction to the surface. Whereas, time-resolved optical emission spectroscopy explains the possible recombination mechanism in the plasma due to higher-silane related reactive species (HSRS) formation via polymerization reactions. Our results point out that the ignition conditions with a rather low power for longer time give the best passivation, resulting an effective lifetime up to 9 ms.

  8. Surface Material Characterization from Multi-band Optical Observations

    Science.gov (United States)

    Hall, D.

    2010-09-01

    Ground-based optical and radar sites routinely acquire resolved images of satellites. These resolved images provide the means to construct accurate wire-frame models of the observed body, as well as an understanding of its orientation as a function of time. Unfortunately, because such images are typically acquired in a single spectral band, they provide little information on the types of materials covering the satellite's various surfaces. Detailed surface material characterization generally requires spectrometric and/or multi-band photometric measurements. Fortunately, many instruments provide such multi-band information (e.g., spectrographs and multi-channel photometers). However, these sensors often measure the brightness of the entire satellite, with no spatial resolution at all. Because such whole-body measurements represent a summation of contributions from many reflecting surfaces, an ―un-mixing‖ or inversion process must be employed to determine the materials covering each of the satellite's individual sub-components. The first section of this paper describes the inversion theory required to retrieve satellite surface material properties from temporal sequences of whole-body multi-band brightness measurements. The inversion requires the following as input: 1) a set of multi-band measurements of a satellite's reflected-sunlight brightness, 2) the satellite's wire-frame model, including each major component capable of reflecting sunlight, 3) the satellite's attitude, specifying the body’s orientation at the time of each multi-band measurement, and 4) a database of bi-directional reflection distribution functions for a set of candidate surface materials. As output, the inversion process yields estimates of the fraction of each major satellite component covered by each candidate material. The second section of the paper describes several tests of the method by applying it to simulated multi-band observations of a cubical satellite with different materials

  9. Study of the terahertz spectra of crystalline materials using NDDO semi-empirical methods: polyethylene, poly(vinylidene fluoride) form II and $\\alpha$-D-glucose

    CERN Document Server

    Chamorro-Posada, P

    2016-01-01

    Semi-empirical quantum chemistry methods offer a very interesting compromise between accuracy and computational load. In order to assess the performance of NDDO methods in the interpretation of terahertz spectra, the low frequency vibration modes of three crystalline materials, namely, polyethylene, poly(vinylidene fluoride) form II and $\\alpha$-D-glucose have been studied using the PM6 and PM7 Hamiltonians and the results have been compared with the experimental data and former calculations. The results show good qualitative or semi-quantitative agreement with the experimentally observed terahertz spectra.

  10. Thermodynamic properties of chiral liquid crystalline material (S)-4-(2-methylbutyl)-4'-cyanobiphenyl (5*CB)

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Hal [Research Center for Molecular Thermodynamics, Graduate School of Science, Osaka University, Toyonaka, Osaka 560-0043 (Japan); Inaba, Akira [Research Center for Molecular Thermodynamics, Graduate School of Science, Osaka University, Toyonaka, Osaka 560-0043 (Japan)], E-mail: inaba@chem.sci.osaka-u.ac.jp; Krawczyk, Jan; Massalska-Arodz, Maria [Henryk Niewodniczanski Institute of Nuclear Physics, Polish Academy of Sciences, Radzikowskiego 152, 31-342 Krakow (Poland)

    2008-08-15

    As a part of a project of clarifying the physical properties and dynamics of cyanobiphenyls with chiral molecules, thermodynamic properties of (S)-4-(2-methylbutyl)-4'-cyanobiphenyl (5*CB) were investigated by adiabatic calorimetry between T = (5 and 350) K. The complicated phase behaviour was solved and the thermodynamic functions were determined. A new glass transition was identified in the phase II (metastable crystal) at T = 105 K. No inversion of the stability between two crystalline phases was found, being contrary to the expectations from the previous neutron scattering studies.

  11. Nano-regime Length Scales Extracted from the First Sharp Diffraction Peak in Non-crystalline SiO2 and Related Materials: Device Applications

    Directory of Open Access Journals (Sweden)

    Phillips James

    2010-01-01

    Full Text Available Abstract This paper distinguishes between two different scales of medium range order, MRO, in non-crystalline SiO2: (1 the first is ~0.4 to 0.5 nm and is obtained from the position of the first sharp diffraction peak, FSDP, in the X-ray diffraction structure factor, S(Q, and (2 the second is ~1 nm and is calculated from the FSDP full-width-at-half-maximum FWHM. Many-electron calculations yield Si–O third- and O–O fourth-nearest-neighbor bonding distances in the same 0.4–0.5 nm MRO regime. These derive from the availability of empty Si dπ orbitals for back-donation from occupied O pπ orbitals yielding narrow symmetry determined distributions of third neighbor Si–O, and fourth neighbor O–O distances. These are segments of six member rings contributing to connected six-member rings with ~1 nm length scale within the MRO regime. The unique properties of non-crystalline SiO2 are explained by the encapsulation of six-member ring clusters by five- and seven-member rings on average in a compliant hard-soft nano-scaled inhomogeneous network. This network structure minimizes macroscopic strain, reducing intrinsic bonding defects as well as defect precursors. This inhomogeneous CRN is enabling for applications including thermally grown ~1.5 nm SiO2 layers for Si field effect transistor devices to optical components with centimeter dimensions. There are qualitatively similar length scales in nano-crystalline HfO2 and phase separated Hf silicates based on the primitive unit cell, rather than a ring structure. Hf oxide dielectrics have recently been used as replacement dielectrics for a new generation of Si and Si/Ge devices heralding a transition into nano-scale circuits and systems on a Si chip.

  12. Radiation damage and recovery of medium heavy and light inorganic crystalline, glass and glass ceramics materials after irradiation with 150 MeV protons and 1.2 MeV gamma-rays

    Energy Technology Data Exchange (ETDEWEB)

    Brinkmann, K.T.; Dormenev, V.; Novotny, R.W.; Zaunick, H.G. [II. Physikalisches Institut, JLU Giessen (Germany); Borisevich, A.; Korjik, M.; Kozlov, D. [INP BSU, Minsk (Belarus); Kalinov, V.; Voitovich, A. [Institute of Physics of National Academy of Science, Minsk (Belarus); Kavatsyuk, M. [KVI-CART, University Groningen (Netherlands)

    2015-07-01

    Further concepts of the detectors at HEP experiments will require using cheap, capable for a mass production and radiation hard materials, especially for application at collider experiments. A set of samples with volume 1-2 cm{sup 3} of the middle light and light materials: crystalline BaF{sub 2}, Y{sub 3}A{sub l5}O{sub 12}:Ce, Y{sub 3}A{sub l5}O{sub 12}:Pr, Lu{sub 3}A{sub l5}O{sub 12}:Ce, LiF and newly developed glass and glass ceramics DSB:Ce and DSL:Ce were irradiated with gamma-quanta with absorbed dose 100 Gy and 150 MeV protons up to fluence 5 x 10{sup 13} p/cm{sup 2}. Here we report results of the comparison of the optical transmission damage and recovery after different types of irradiation. A significant acceleration of the induced absorption recovery is observed at the DSB:Ce samples illuminated with visible and IR light. This effect is similar to one observed by us in PWO. It indicates that radiation induced absorption in DSB: Ce scintillation material can be retained at the acceptable level by stimulation with light at the conditions of a strong irradiation environment of the collider experiments.

  13. Fiber Optic Thermal Health Monitoring of Aerospace Structures and Materials

    Science.gov (United States)

    Wu, Meng-Chou; Winfree, William P.; Allison, Sidney G.

    2009-01-01

    A new technique is presented for thermographic detection of flaws in materials and structures by performing temperature measurements with fiber Bragg gratings. Individual optical fibers with multiple Bragg gratings employed as surface temperature sensors were bonded to the surfaces of structures with subsurface defects or thickness variations. Both during and following the application of a thermal heat flux to the surface, the individual Bragg grating sensors measured the temporal and spatial temperature variations. The investigated structures included a 10-ply composite specimen with subsurface delaminations of various sizes and depths. The data obtained from grating sensors were further analyzed with thermal modeling to reveal particular characteristics of the interested areas. These results were found to be consistent with those from conventional thermography techniques. Limitations of the technique were investigated using both experimental and numerical simulation techniques. Methods for performing in-situ structural health monitoring are discussed.

  14. Laser-Induced Damage Initiation and Growth of Optical Materials

    Directory of Open Access Journals (Sweden)

    Jingxia Yu

    2014-01-01

    Full Text Available The lifetime of optical components is determined by the combination of laser-induced damage initiation probability and damage propagation rate during subsequent laser shots. This paper reviews both theoretical and experimental investigations on laser-induced damage initiation and growth at the surface of optics. The damage mechanism is generally considered as thermal absorption and electron avalanche, which play dominant roles for the different laser pulse durations. The typical damage morphology in the surface of components observed in experiments is also closely related to the damage mechanism. The damage crater in thermal absorption process, which can be estimated by thermal diffusion model, is typical distortion, melting, and ablation debris often with an elevated rim caused by melted material flow and resolidification. However, damage initiated by electron avalanche is often accompanied by generation of plasma, crush, and fracture, which can be explained by thermal explosion model. Damage growth at rear surface of components is extremely severe which can be explained by several models, such as fireball growth, impact crater, brittle fracture, and electric field enhancement. All the physical effects are not independent but mutually coupling. Developing theoretical models of multiphysics coupling are an important trend for future theoretical research. Meanwhile, more attention should be paid to integrated analysis both in theory and experiment.

  15. Thin film detection of High Energy Materials: Optical Pumping Approach

    CERN Document Server

    Barthwal, Sachin

    2014-01-01

    We present our work on High Energy Material detection based on thin film of Lithium using the phenomenon of Optical Pumping. The Li atoms present in the thin film are optically pumped to one of the ground hyperfine energy levels so that they can no more absorb light from the resonant light source. Now in presence of a RF signal, which quantifies the ambient magnetic field, this polarized atomic system is again randomized thus making it reabsorb the resonant light. This gives a quantified measurement of the magnetic field surrounding the thin film detector. This is then mapped to the presence of magnetic HEM and hence the HEM are detected. Our approach in this regard starts with verifying the stability of Lithium atoms in various solvents so as to get a suitable liquid medium to form a thin film. In this regard, various UV-visible characterization spectra are presented to finally approach a stable system for the detection. We have worked on around 10 polar and non- polar solvents to see the stability criteria....

  16. Chiral front propagation in liquid-crystalline materials: Formation of the planar monodomain twisted plywood architecture of biological fibrous composites.

    Science.gov (United States)

    De Luca, Gino; Rey, Alejandro D

    2004-01-01

    Biological fibrous composites commonly exhibit an architecture known as twisted plywood, which is similar to that of the cholesteric liquid-crystalline mesophases. The explanation for the structural similarity is that biological fibrous composites adopt a lyotropic cholesteric liquid-crystalline phase during their formation process. In this work, a mathematical model based on the Landau-de Gennes theory of liquid crystals has been developed to reproduce the process by which long chiral fibrous molecules form the twisted plywood structures observed in biological composites. The dynamics of the process was then further investigated by analytically solving a simplified version of the governing equations. Results obtained from the model are in good qualitative agreement with the theory of Neville [Biology of Fibrous Composites (Cambridge University Press, Cambridge, England, 1993)] who hypothesized the necessity of a constraining layer to lock the direction of the helical axis of the plywood in order to create a monodomain structure. Computational results indicate that the plywood architecture is obtained by a chiral front propagation process with a fully relaxed wake. The effects of chirality and concentration on the formation process kinetics are characterized.

  17. Basic Studies of Nonlinear Optical Materials for Eye and Sensor Protection

    Science.gov (United States)

    2004-03-10

    1 BASIC STUDIES OF NONLINEAR OPTICAL MATERIALS FOR EYE AND SENSOR PROTECTION I. Abstract: We have studied the spectroscopy, kinetics and...study liquid or solid materials from CW to 100x10-15 seconds. Basic Studies of Nonlinear Optical Materials for Eye and Sensor Protection

  18. Supramolecular Structure, Physical Properties, and Langmuir-Blodgett Film Formation of an Optically Active Liquid-Crystalline Phthalocyanine

    NARCIS (Netherlands)

    Nostrum, Cornelus F. van; Bosman, Anton W.; Gelinck, Gerwin H.; Schouten, Pieter G.; Warman, John M.; Devillers, Marinus A.C.; Meijerink, Andries; Picken, Stephen J.; Sohling, Ulrich; Schouten, Arend-Jan; Nolte, Roeland J.M.

    The structure and physical properties of optically active, metal-free 2,3,9,10,16,17,23,24-octa(S-3,7-dimethyloctoxy)phthalocyanine ((S)-Pc(8,2)) are reported and compared with those of the phthalocyanine with (R,S) side chains (mixture of 43 stereoisomers). Unlike the latter compound, (S)-Pc(8,2)

  19. Silver nanoprisms/silicone hybrid rubber materials and their optical limiting property to femtosecond laser

    Science.gov (United States)

    Li, Chunfang; Liu, Miao; Jiang, Nengkai; Wang, Chunlei; Lin, Weihong; Li, Dongxiang

    2017-08-01

    Optical limiters against femtosecond laser are essential for eye and sensor protection in optical processing system with femtosecond laser as light source. Anisotropic Ag nanoparticles are expected to develop into optical limiting materials for femtosecond laser pulses. Herein, silver nanoprisms are prepared and coated by silica layer, which are then doped into silicone rubber to obtain hybrid rubber sheets. The silver nanoprisms/silicone hybrid rubber sheets exhibit good optical limiting property to femtosecond laser mainly due to nonlinear optical absorption.

  20. Nonlinear Optical Properties of Organic and Polymeric Thin Film Materials of Potential for Microgravity Processing Studies

    Science.gov (United States)

    Abdeldayem, Hossin; Frazier, Donald O.; Paley, Mark S.; Penn, Benjamin; Witherow, William K.; Bank, Curtis; Shields, Angela; Hicks, Rosline; Ashley, Paul R.

    1996-01-01

    In this paper, we will take a closer look at the state of the art of polydiacetylene, and metal-free phthalocyanine films, in view of the microgravity impact on their optical properties, their nonlinear optical properties and their potential advantages for integrated optics. These materials have many attractive features with regard to their use in integrated optical circuits and optical switching. Thin films of these materials processed in microgravity environment show enhanced optical quality and better molecular alignment than those processed in unit gravity. Our studies of these materials indicate that microgravity can play a major role in integrated optics technology. Polydiacetylene films are produced by UV irradiation of monomer solution through an optical window. This novel technique of forming polydiacetylene thin films has been modified for constructing sophisticated micro-structure integrated optical patterns using a pre-programmed UV-Laser beam. Wave guiding through these thin films by the prism coupler technique has been demonstrated. The third order nonlinear parameters of these films have been evaluated. Metal-free phthalocyanine films of good optical quality are processed in our laboratories by vapor deposition technique. Initial studies on these films indicate that they have excellent chemical, laser, and environmental stability. They have large nonlinear optical parameters and show intrinsic optical bistability. This bistability is essential for optical logic gates and optical switching applications. Waveguiding and device making investigations of these materials are underway.

  1. Optical Coatings Formed by Gradient Refractive Index Materials

    Directory of Open Access Journals (Sweden)

    Kęstutis Juškevičius

    2012-01-01

    Full Text Available Recent advances in ion beam sputtering technology enabled efficient deposition of different oxide mixture coatings. In the present investigation, coating materials ZrO2 and SiO2 were utilized for the synthesis of different mixtures. The goal of the conducted investigation was to explore the potential of ZrO2/SiO2 mixtures, especially for applications in the range of the UV spectral. Deposited dielectric mirrors having classical quarter-wave and “rised” design with ZrO2/SiO2 mixture for 266 nm and 355 nm showed good resistance to laser radiation.We also investigated the “fatigue” behavior of LIDT’s in LBO crystals with single, dual and triple wavelength anti-reflective coatings (AR@355, AR@532+1064 and AR@355+532+1064 in order to optimize design and layer materials. The influence of gradient refractive index profiles on damage resistance is of a special interest. We selected a few designs of antireflective coatings which demonstrated the best resistance to laser radiation.An experimental study on rugate filter coatings showed the need for a more accurate characterization of optical properties of metal oxides and their corresponding mixtures.Article in Lithuanian

  2. Influence of spiral framework on nonlinear optical materials.

    Science.gov (United States)

    Hu, Yang-Yang; Sun, Shi-Ling; Tian, Wen-Tao; Tian, Wei Quan; Xu, Hong-Liang; Su, Zhong-Min

    2014-04-04

    A series of spiral donor-π-acceptor frameworks (i.e. 2-2, 3-3, 4-4, and 5-5) based on 4-nitrophenyldiphenylamine with π-conjugated linear acenes (naphthalenes, anthracenes, tetracenes, and pentacenes) serving as the electron donor and nitro (NO2 ) groups serving as the electron acceptor were designed to investigate the relationships between the nonlinear optical (NLO) responses and the spirality in the frameworks. A parameter denoted as D was defined to describe the extent of the spiral framework. The D value reached its maximum if the number of NO2 groups was equal to the number of fused benzene rings contained in the linear acene. A longer 4-nitrophenyldiphenylamine chain led to a larger D value and, further, to a larger first hyperpolarizability. Different from traditional NLO materials with charge transfer occurring in the one-dimensional direction, charge transfer in 2-2, 3-3, 4-4, and 5-5 occur in three-dimensional directions due to the attractive spiral frameworks, and this is of great importance in the design of NLO materials. The origin of such an enhancement in the NLO properties of these spiral frameworks was explained with the aid of molecular orbital analysis. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Surface imaging of metallic material fractures using optical coherence tomography.

    Science.gov (United States)

    Hutiu, Gheorghe; Duma, Virgil-Florin; Demian, Dorin; Bradu, Adrian; Podoleanu, Adrian Gh

    2014-09-10

    We demonstrate the capability of optical coherence tomography (OCT) to perform topography of metallic surfaces after being subjected to ductile or brittle fracturing. Two steel samples, OL 37 and OL 52, and an antifriction Sn-Sb-Cu alloy were analyzed. Using an in-house-built swept source OCT system, height profiles were generated for the surfaces of the two samples. Based on such profiles, it can be concluded that the first two samples were subjected to ductile fracture, while the third one was subjected to brittle fracture. The OCT potential for assessing the surface state of materials after fracture was evaluated by comparing OCT images with images generated using an established method for such investigations, scanning electron microscopy (SEM). Analysis of cause of fracture is essential in response to damage of machinery parts during various accidents. Currently the analysis is performed using SEM, on samples removed from the metallic parts, while OCT would allow in situ imaging using mobile units. To the best of our knowledge, this is the first time that the OCT capability to replace SEM has been demonstrated. SEM is a more costly and time-consuming method to use in the investigation of surfaces of microstructures of metallic materials.

  4. ICOM2012: 3rd International Conference on the Physics of Optical Materials and Devices (Belgrade, Serbia, 2-6 September 2012)

    Science.gov (United States)

    Dramićanin, Miroslav D.; Antić, Željka; Viana, Bruno

    2013-11-01

    The 3rd International Conference on the Physics of Optical Materials and Devices (ICOM2012) was held in Belgrade (Serbia) from 2 to 6 September 2012 (figure 1). The conference was organized by the Vinča Institute of Nuclear Sciences, University of Belgrade (Serbia) and the Laboratoire de Chimie de la Matière Condensée de Paris (France), and supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia and Optical Society of America. ICOM2012 was a follow-up to the two previous, successful ICOM conferences held in Herceg Novi in 2006 and 2009. The conference aimed at providing a forum for scientists in optical materials to debate on: • Luminescent materials and nanomaterials • Hybrid optical materials (organic/inorganic) • Characterization techniques of optical materials • Luminescence mechanisms and energy transfers • Theory and modeling of optical processes • Ultrafast-laser processing of materialsOptical sensors • Medical imaging • Advanced optical materials in photovoltaics and biophotonics • Photothermal and photoacoustic spectroscopy and phenomena The conference stressed the value of a fundamental scientific understanding of optical materials. A particular accent was put on wide band-gap materials in crystalline, glass and nanocrystalline forms. The applications mainly involved lasers, scintillators and phosphors. Rare earth and transition metal ions introduced as dopants in various hosts were considered, and their impact on the optical properties were detailed in several presentations. This volume contains selected contributions of speakers and participants of the ICOM2012 conference. The conference provided a unique opportunity for about 200 scientists from 32 countries to discuss recent progress in the field of optical materials. During the three and half days, 21 invited talks and 52 contributed lectures were given, with a special event in memory of our dear colleague Professor Dr Tsoltan

  5. A 4F2-cross-point phase change memory using nano-crystalline doped GeSbTe material

    Science.gov (United States)

    Takaura, Norikatsu; Kinoshita, Masaharu; Tai, Mitsuharu; Ohyanagi, Takasumi; Akita, Kenichi; Morikawa, Takahiro

    2015-04-01

    This paper reports on the use of nano-crystalline doped GeSbTe, or nano-GST, to fabricate a cross-point phase change memory with 4F2 cell size and test results obtained for it. We show the characteristics of a poly-Si diode select device with a high on-off ratio and data writing in a 4F2 memory cell array. The advantages of nano-GST over conventional GeSbTe are presented in terms of neighboring disturbance and 4F2 cross-point array formation. The memory cells’ high drivability, low power, and selective write and read performances are demonstrated. The scalability of the diode current density is also presented.

  6. "Bicontinuous cubic" liquid crystalline materials from discotic molecules: a special effect of paraffinic side chains with ionic liquid pendants.

    Science.gov (United States)

    Alam, Md Akhtarul; Motoyanagi, Jin; Yamamoto, Yohei; Fukushima, Takanori; Kim, Jungeun; Kato, Kenichi; Takata, Masaki; Saeki, Akinori; Seki, Shu; Tagawa, Seiichi; Aida, Takuzo

    2009-12-16

    Triphenylene (TP) derivatives bearing appropriate paraffinic side chains with imidazolium ion-based ionic liquid (IL) pendants were unveiled to display a phase diagram with liquid crystalline (LC) mesophases of bicontinuous cubic (Cub(bi)) and hexagonal columnar (Col(h)) geometries. While their phase transition behaviors are highly dependent on the length of the side chains and the size of the ionic liquid pendants, TPs with hexadecyl side chains exclusively form a Cub(bi) LC assembly over an extremely wide temperature range of approximately 200 degrees C from room temperature when the anions of the IL pendants are relatively small. Wide-angle X-ray diffraction analysis suggested that the Cub(bi) LC mesophase contains pi-stacked columnar TP arrays with a plane-to-plane separation of approximately 3.5 A. Consistently, upon laser flash photolysis, it showed a transient microwave conductivity comparable to that of a Col(h) LC reference.

  7. Direct Access to Mesoporous Crystalline TiO2/Carbon Composites with Large and Uniform Pores for Use as Anode Materials in Lithium Ion Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jinwoo [Pohang Univ. of Science and Technology (POSTECH) (Korea, Republic of); Jung, Yoon S. [Seoul National Univ. (Korea, Republic of); Warren, Scott C. [Cornell Univ., Ithaca, NY (United States); Kamperman, Marleen [Cornell Univ., Ithaca, NY (United States); Oh, Seung M. [Seoul National Univ. (Korea, Republic of); DiSalvo, Francis J. [Cornell Univ., Ithaca, NY (United States); Wiesner, Ulrich [Cornell Univ., Ithaca, NY (United States)

    2011-01-07

    Mesoporous and highly crystalline TiO2 (anatase)/carbon composites with large (>5 nm) and uniform pores were synthesized using PI-b-PEO block copolymers as structure directing agents. Pore sizes could be tuned by utilizing block copolymers with different molecular weights. The resulting mesoporous TiO2/carbon was successfully used as an anode material for Li ion batteries. Without addition of conducting aid (Super P), the electrode showed high capacity during the first insertion/desertion cycle due to carbon wiring inside the walls of mesoporous TiO2/carbon. The electrode further showed stable cycle performance up to 50 cycles and the specific charge capacity at 30 C was 38 mA h (g of TiO2)-1, which indicates CCM-TiO2/carbon can be used as a material for high rate use.

  8. Palagonitic Mars from Rock Rinds to Dust: Evidence from Visible, Near-IR, and Thermal Emission Spectra of Poorly Crystalline Materials

    Science.gov (United States)

    Morris, R. V.; Graff, T. G.; Mertzman, S. A.; Lane, M. D.; Christensen, P. R.

    2003-01-01

    Visible and near-IR (VNIR) spectral data for Martian bright regions are characterized by a general shape consisting of a ferric absorption edge extending from about 400 to 750 nm and relatively constant reflectivity extending from about 750 nm to beyond 2000 nm . Among terrestrial geologic materials, the best spectral analogues are certain palagonic tephras from Mauna Kea Volcano (Hawaii). By definition, palagonite is a yellow or orange isotropic mineraloid formed by hydration and devitrification of basaltic glass. The ferric pigment in palagonite is nanometer-sized ferric oxide particles (np-Ox) dispersed throughout the hydrated basaltic glass matrix. The hydration state of the np-Ox particles is not known, and the best Martian spectral analogues contain allophane-like materials and not crystalline phyllosilicates. We show here that laboratory VNIR and TES spectra of palagonitic alteration rinds developed on basaltic rocks are spectral endmembers that provide a consistent explanation for both VNIR and TES data of Martian dark regions.

  9. The Influence of Morphology on Photo-catalytic Activity and Optical Prop erties of Nano-crystalline ZnO Powder

    Institute of Scientific and Technical Information of China (English)

    Javad Moghaddam; Sara Mollaesmail; Saeed Karimi

    2012-01-01

    ZnO nano-particles were synthesized via an ammonical ammonium carbonate solution by pre-cipitation method in presence of some additives such as urea, oleic and stearic acid. The morphology and crystallinity of the obtained zinc oxide particles depend critically on the type of additive which was used. Ad-ditives also affected the crystal orientation of precipitate nano-particles. SEM, XRD, BET and UV-visible were used to characterize morphology, microstructure, specific surface area and optical properties of the products. Photo-catalysis properties of the as-prepared ZnO powders were evaluated by degradation of methyl red (acid red) in aqueous solution exposed to UV-light. Results suggested a close relationship among the morphology, size and surface area on photo-catalysis and optical properties of the particles. The widest Eg value (3.56 eV), highest degradation and decolorization efficiency (99%) were obtained from a sample with the smallest grain size (largest surface area) which were used urea as an additive.

  10. Variation in the Optical Properties of the SiC-SiO2 Composite Antireflection Layer in Crystalline Silicon Solar Cells by Annealing

    Science.gov (United States)

    Jannat, Azmira; Li, Zhen Yu; Akhter, M. Shaheer; Yang, O.-Bong

    2017-07-01

    This study showed the effects of annealing on a sol-gel-derived SiC-SiO2 composite antireflection (AR) layer and investigated the optical and photovoltaic properties of crystalline silicon (Si) solar cells. The SiC-SiO2 composite AR coating showed a considerable decrease in reflectance from 7.18% to 3.23% at varying annealing temperatures of 450-800°C. The refractive indices of the SiC-SiO2 composite AR layer were tuned from 2.06 to 2.45 with the increase in annealing temperature. The analysis of the current density-voltage characteristics indicated that the energy conversion efficiencies of the fabricated Si solar cells gradually increased from 16.99% to 17.73% with increasing annealing temperatures of 450-800°C. The annealing of the SiC-SiO2 composite AR layer in Si solar cells was crucial to improving the optical, morphological, and photovoltaic properties.

  11. Optical characterization of double-side-textured silicon wafer based on photonic nanostructures for thin-wafer crystalline silicon solar cells

    Science.gov (United States)

    Tayagaki, Takeshi; Furuta, Daichi; Aonuma, Osamu; Takahashi, Isao; Hoshi, Yusuke; Kurokawa, Yasuyoshi; Usami, Noritaka

    2017-04-01

    Crystalline silicon (c-Si) wafers have found extensive use in photovoltaic applications. In this regard, to enable advanced light manipulation in thin-wafer c-Si solar cells, we demonstrate the fabrication of double-side-textured Si wafers composed of a front-surface photonic nanotexture fabricated with quantum dot arrays and a rear-surface microtexture. The addition of the rear-surface microtexture to a Si wafer with the front-surface photonic nanotexture increases the wafer’s optical absorption in the near-infrared region, thus enabling enhanced light trapping. Excitation spectroscopy reveals that the photoluminescence intensity in the Si wafer with the double-sided texture is higher than that in the Si wafer without the rear-surface microtexture, thus indicating an increase in true optical absorption in the Si wafer with the double-sided texture. Our results indicate that the double-sided textures, i.e., the front-surface photonic nanotexture and rear-surface microtexture, can effectively reduce the surface reflection loss and provide enhanced light trapping, respectively.

  12. Supramolecular Structure, Physical Properties, and Langmuir-Blodgett Film Formation of an Optically Active Liquid-Crystalline Phthalocyanine

    NARCIS (Netherlands)

    Nostrum, Cornelus F. van; Bosman, Anton W.; Gelinck, Gerwin H.; Schouten, Pieter G.; Warman, John M.; Devillers, Marinus A.C.; Meijerink, Andries; Picken, Stephen J.; Sohling, Ulrich; Schouten, Arend-Jan; Nolte, Roeland J.M.

    1995-01-01

    The structure and physical properties of optically active, metal-free 2,3,9,10,16,17,23,24-octa(S-3,7-dimethyloctoxy)phthalocyanine ((S)-Pc(8,2)) are reported and compared with those of the phthalocyanine with (R,S) side chains (mixture of 43 stereoisomers). Unlike the latter compound, (S)-Pc(8,2) l

  13. Supramolecular Structure, Physical Properties, and Langmuir-Blodgett Film Formation of an Optically Active Liquid-Crystalline Phthalocyanine

    NARCIS (Netherlands)

    Nostrum, Cornelus F. van; Bosman, Anton W.; Gelinck, Gerwin H.; Schouten, Pieter G.; Warman, John M.; Devillers, Marinus A.C.; Meijerink, Andries; Picken, Stephen J.; Sohling, Ulrich; Schouten, Arend-Jan; Nolte, Roeland J.M.

    1995-01-01

    The structure and physical properties of optically active, metal-free 2,3,9,10,16,17,23,24-octa(S-3,7-dimethyloctoxy)phthalocyanine ((S)-Pc(8,2)) are reported and compared with those of the phthalocyanine with (R,S) side chains (mixture of 43 stereoisomers). Unlike the latter compound, (S)-Pc(8,2) l

  14. Investigations on crystalline structure and optical band gap of nearly stoichiometric LiNbO3 nanoparticles

    Science.gov (United States)

    Debnath, C.; Kar, S.; Verma, S.; Bartwal, K. S.

    2014-11-01

    The structural and optical characteristics of nearly stoichiometric lithium niobate, LiNbO3 nanoparticles have been studied. The results are very different compared to the bulk LiNbO3 single crystals. The nanoparticles were synthesized by citrate gel method and the phase was confirmed by powder X-ray diffraction. The size and size distribution of the nanoparticles were obtained by XRD, SEM, TEM and DLS experiments. The particles were in the range of 50-200 nm and most of the particles are about 100 nm of size. The lattice parameters obtained from selected area electron diffraction are aH = 5.213 Å and cH = 14.026 Å for hexagonal system which are slightly larger than the other reported values (JCPDS). The optical properties were obtained from optical absorption spectroscopy in UV-vis.-NIR and IR (FTIR) range, the electronic band gap structure were determined from the fundamental absorption edge in the UV region. The indirect band gap was of 4.78 eV where as the direct gap was of 6.0 eV which are much larger than the other experimental values. The absorption features in the UV range indicate the discrete nature of conduction band and the allowed energy levels in the forbidden gap appeared due to surface defects.

  15. Recovery of waste and side products of apatite-nepheline and eudialyte ores processing in manufacture of heat-insulating foam glassy-crystalline materials

    Directory of Open Access Journals (Sweden)

    Suvorova O. V.

    2017-03-01

    Full Text Available Overburden and dressing tailings accumulated in the Murmansk region in impressive volumes represent serious challenges of both economic and ecological character. Maintenance of overburden dumps and dressing tailings involves considerable capital and material expenses. Therefore reprocessing of mining waste and manufacture of building materials, including heat-insulating foam-glass materials, is a promising trend. The work discusses the feasibility of recovering silica-containing waste and ore processing byproducts on the Kola Peninsula. Compositions and techniques for producing blocks and pellets from foam-glass crystalline materials have been developed. The effect of modifying agents on the foam-silicate materials' mechanical properties has been investigated. The production conditions for high-quality foam-silicate blocks have been identified. The foam silicates obtained under optimal conditions have featured a relatively low viscosity (0.3–0.5 g/cm³, high strength (up to 5 MPa and heat conductivity (0.09–0.107 Wt/m·K. Methods of improving the operating characteristics of foam silicates based on structure perfecting have been proposed. It has been found that as a result of shorttime baking of grainy samples the product has a grain strength of 5–6 MPa, density of 0.25–0.35 g/cm3 and a resistance to crushing in cylinder of 2.2–3 MPa, which is 2–3 times higher than that of a material subjected to one-stage thermal treatment. The water absorption of the material is 5–6 %, which is by a half lower compared to a one-stage treated material. The thermal conduction coefficient is 0.091–0.096 Wt/m·K. The obtained materials are recommended for use as heat-insulating surfacing and filling material for garrets, floors and roofs in construction and renovation of industrial and civic buildings

  16. Basic research challenges in crystalline silicon photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Werner, J.H. [Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany)

    1995-08-01

    Silicon is abundant, non-toxic and has an ideal band gap for photovoltaic energy conversion. Experimental world record cells of 24 % conversion efficiency with around 300 {mu}m thickness are only 4 % (absolute) efficiency points below the theoretical Auger recombination-limit of around 28 %. Compared with other photovoltaic materials, crystalline silicon has only very few disadvantages. The handicap of weak light absorbance may be mastered by clever optical designs. Single crystalline cells of only 48 {mu}m thickness showed 17.3 % efficiency even without backside reflectors. A technology of solar cells from polycrystalline Si films on foreign substrates arises at the horizon. However, the disadvantageous, strong activity of grain boundaries in Si could be an insurmountable hurdle for a cost-effective, terrestrial photovoltaics based on polycrystalline Si on foreign substrates. This talk discusses some basic research challenges related to a Si based photovoltaics.

  17. Sub-nanosecond optical diagnostics of laser-material interaction and dynamic microstructure of materials

    Energy Technology Data Exchange (ETDEWEB)

    Paisley, D.L.; Stahl, D.B.

    1993-03-01

    Several optical diagnostic techniques are used to evaluate the dynamic response of materials to intense dynamic loading and unloading, high stress and strain, and pressure. Velocity interferometry and electronic streak photography, each with sub-nanosecond time resolution, are used to record dynamic material response. Laser-launched flat plates are accelerated to 10{sup 12} m/s{sup 2} with terminal velocities >5 km/s. By impacting these plates into target samples, high strain rates (10{sup 8} sec{sup {minus}1}) and pressures >100 GPa have been generated for a duration of 0.8--5 nanoseconds. The efficacy and limitations of each technique are detailed and applications to other fields discussed.

  18. Sub-nanosecond optical diagnostics of laser-material interaction and dynamic microstructure of materials

    Energy Technology Data Exchange (ETDEWEB)

    Paisley, D.L.; Stahl, D.B.

    1993-01-01

    Several optical diagnostic techniques are used to evaluate the dynamic response of materials to intense dynamic loading and unloading, high stress and strain, and pressure. Velocity interferometry and electronic streak photography, each with sub-nanosecond time resolution, are used to record dynamic material response. Laser-launched flat plates are accelerated to 10[sup 12] m/s[sup 2] with terminal velocities >5 km/s. By impacting these plates into target samples, high strain rates (10[sup 8] sec[sup [minus]1]) and pressures >100 GPa have been generated for a duration of 0.8--5 nanoseconds. The efficacy and limitations of each technique are detailed and applications to other fields discussed.

  19. Biometric, optical and physical changes in the isolated human crystalline lens with age in relation to presbyopia.

    Science.gov (United States)

    Glasser, A; Campbell, M C

    1999-06-01

    The biometric, optical and physical properties of 19 pairs of isolated human eye-bank lenses ranging in age from 5 to 96 years were compared. Lens focal length and spherical aberration were measured using a scanning laser apparatus, lens thickness and the lens surface curvatures were measured by digitizing the lens profiles and equivalent refractive indices were calculated for each lens using this data. The second lens from each donor was used to measure resistance to physical deformation by providing a compressive force to the lens. The lens capsule was then removed from each lens and each measurement was repeated to ascertain what role the capsule plays in determining these optical and physical characteristics. Age dependent changes in lens focal length, lens surface curvatures and lens resistance to physical deformation are described. Isolated lens focal length was found to be significantly linearly correlated with both the anterior and posterior surface curvatures. No age dependent change in equivalent refractive index of the isolated lens was found. Although decapsulating human lenses causes similar changes in focal length to that which we have shown to occur when human lenses are mechanically stretched into an unaccommodated state, the effects are due to nonsystematic changes in lens curvatures. These studies reinforce the conclusion that lens hardening must be considered as an important factor in the development of presbyopia, that age changes in the human lens are not limited to the loss of accommodation that characterizes presbyopia but that the lens optical and physical properties change substantially with age in a complex manner.

  20. Research on testing the nonlinear optical performance of nonlinear optical materials based on the effect of second-harmonic generation.

    Science.gov (United States)

    Li, Bing-Xuan; Wei, Yong; Huang, Cheng-Hui; Zhuang, Feng-Jiang; Zhang, Ge; Guo, Guo-Cong

    2014-01-01

    In the present paper the authors report a research on testing the nonlinear optical performance of optical materials in visible and infrared band. Based on the second order nonlinear optic principle and the photoelectric signal detection technology, the authors have proposed a new testing scheme in which a infrared OPO laser and a method for separating the beams arising from frequency matching and the light produced by other optical effects were used. The OPO laser is adopted as light source to avoid the error of measurement caused by absorption because the double frequency signal of the material is in the transmittance band Our research work includes testing system composition, operational principle and experimental method. The experimental results of KTP, KDP, AGS tested by this method were presented. In the experiment several new infrared non-linear materials were found. This method possesses the merits of good stability and reliability, high sensitivity, simple operation and good reproducibility, which can effectively make qualitative and semi-quantitative test for optical material's nonlinear optical properties from visible to infrared. This work provides an important test -method for the research on second order nonlinear optical materials in visible, infrared and ultraviolet bands.

  1. Influence of growth time on crystalline structure, conductivity and optical properties of ZnO thin films

    Institute of Scientific and Technical Information of China (English)

    Said Benramache; Foued Chabane; Boubaker Benhaoua; Fatima Z.Lemmadi

    2013-01-01

    This paper examines the growth of ZnO thin films on glass substrate at 350 ℃ using an ultrasonic spray technique.We have investigated the influence of growth time ranging from 1 to 4 min on structural,optical and electrical properties of ZnO thin films.The as-grown films exhibit a hexagonal structure wurtzite and are (002) oriented.The maximum value of grain size G =63.99 nm is attained for ZnO films grown at 2 min.The average transmittance is about 80%,thus the films are transparent in the visible region.The optical gap energy is found to increase from 3.26 to 3.37 eV with growth time increased from 1 to 2 min.The minimum value of electrical resistivity of the films is 0.13 Ω·cm obtained at 2 min.A systematic study on the influence of growth time on the properties of ZnO thin films deposited by ultrasonic spray at 350 ℃ has been reported.

  2. Photo-stimulated electro-optic response of liquid-crystalline system with trans-cis photo-isomerizable agent

    Science.gov (United States)

    Hadjichristov, G. B.; Marinov, Y. G.; Yelamaggad, C. V.

    2014-12-01

    A rather strong photo-stimulated enhancement of photo-induced bend flexoelectric effect based on trans-cis photoisomerization of azo bond was found in a guest-host system formed from the nematic liquid crystal (LC) N-(4-methoxybenzylidene)-4-butylaniline (MBBA) as a host, and the azobenzene LC 4-hexyloxybenzoloxy-4'-cyanoazobenzene, as a guest photoactive agent at 1 wt.% concentration. Upon application of electric field, thin homeotropic layers of thickness 100 pm containing this photo-sensitized LC mixture were investigated as subjected to a relatively weak illumination with UV light (λ = 375 nm, from narrow-band light-emitting diode, LED). The stimulation of the photoactive electro-optic response of azobenzene-doped MBBA (owing to enhanced photo-induced bend flexoelectric effect driven by the photo-isomerizable dopants) was achieved by pre-resonant excitation of the photoactive agent. The degree of the effect measured is of potential interest for thin-film photoactive electro-optic applications. The UV light-induced effect in azobenzene-doped MBBA was reversible; the back (relaxation) process was stimulated by light in the blue from a LED with broadband spectrum centered at 455 nm.

  3. Organic nonlinear optical materials: where we have been and where we are going.

    Science.gov (United States)

    Marder, Seth R

    2006-01-14

    Nonlinear optical (NLO) materials can be useful for a variety of applications varying from modulation of optical signals facilitated by the electro-optic effect-the effect whereby the refractive index of a material changes in response to an applied electric field-to microfabrication, sensing, imaging, and cancer therapy facilitated by multiphoton absorption, wherein molecules simultaneously absorb two or more photons of light. This short Focus article is a brief personal perspective of some of the key advances in second-order NLO materials and in multiphoton-absorbing materials, and of how and why these advances have led to renewed interest in organic NLO materials.

  4. Fluorine segregation in crystalline materials: structural control and solid-state [2+2] cycloaddition in CF(3)-substituted tetrathiafulvalene derivatives.

    Science.gov (United States)

    Jeannin, Olivier; Fourmigué, Marc

    2006-04-03

    The well-known influence of long perfluorinated chains on the structures and stability of amphiphilic molecules in liquid crystalline mesophases or mesoscopic micellar arrangements is evaluated here in the realm of crystalline materials based on rigid aromatic molecules bearing only a limited number of CF(3) moieties. Tetrathiafulvalene (TTF) derivatives bearing one or two CF(3) groups, that is, (Z)- and (E)-(CF(3))(2)TTF ((Z)-1, (E)-1), EDT-TTF-CF(3) (2), and EDT-TTF(CF(3))(2) (3) (EDT=ethylenedithio) are prepared from the 1,3-dipolar reaction of methyl 4,4,4-trifluorotetrolate with ethylenetrithiocarbonate. The structures of neutral (Z)-1, (E)-1, 2, and 3 as indicated by single-crystal X-ray diffraction measurements reveal the recurrent formation of layered structures with a strong segregation of the fluorinated moieties and formation of fluorous bilayers, attributed to the amphiphilic character of those TTF derivatives upon CF(3) functionalization, and without need for longer C(n)F(2n+1) (n>1) perfluorinated chains. The short intermolecular distance between outer C==C double bonds observed in the layered structure of (E)-1 allows a solid-state [2+2] photocyclization with formation of chiral dyads incorporating the characteristic cyclobutane ring. These dyads containing two dihydrotetrathiafulvalene moieties facing each other exhibit reversible oxidation to the mixed-valence radical cation state and organize in the solid-state into the same layered structures with fluorous bilayers.

  5. Phase matching, X-Ray topography, optical and thermal analysis of L-alanine cadmium chloride monohydrate: a nonlinear optical material

    Science.gov (United States)

    Krishna, Anuj; Vijayan, N.; Riscob, B.; Gour, B. S.; Haranath, D.; Philip, J.; Verma, S.; Jayalakshmy, M. S.; Bhagavannarayana, G.; Halder, S. K.

    2014-03-01

    A potential semiorganic nonlinear optical material, L-alanine cadmium chloride monohydrate has been successfully synthesised and single crystals have been grown by slow evaporation solution growth technique at room temperature by using double distilled water as the solvent. The lattice dimensions of the grown crystal have been analysed by adopting powder X-ray diffraction technique and found that it crystallised in monoclinic system with space group C2. The crystalline perfection of the as-grown crystal has been assessed by high resolution X-ray diffraction and X-ray topography techniques and observed that the quality of the grown specimen is reasonably good. Its optical properties were examined by UV-Vis and photoluminescence techniques and found that there is no absorption in the entire visible range. Its functional groups were identified from FT-Raman and observed that there is no incorporation of other impurities during crystallisation. Its relative second harmonic generation efficiency has been tested with different particle size by Kurtz powder technique and found that within the coherence length the title compound is phase matchable. Its various thermal properties like thermal conductivity, specific heat, thermal effusivity, etc. have been evaluated by photopyroelectric technique and compared with other organic and inorganic materials. To confirm its piezoelectric response, its piezoelectric charge coefficient was measured using piezometer and found low. Its optical homogeneity as well as birefringence measurement of the grown specimen has been carried out by interferometric technique. The surface defects of the grown LACCM single crystal were analysed with etching at room temperature using water as an etchant.

  6. Phase matching, X-Ray topography, optical and thermal analysis of L-alanine cadmium chloride monohydrate: a nonlinear optical material

    Energy Technology Data Exchange (ETDEWEB)

    Krishna, Anuj; Vijayan, N.; Haranath, D.; Bhagavannarayana, G.; Halder, S.K. [CSIR - National Physical Laboratory, New Delhi (India); Riscob, B. [CSIR - National Physical Laboratory, New Delhi (India); Institute of Plasma Research, Bhat, Gandhinagar (India); Gour, B.S. [Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal (India); Philip, J.; Jayalakshmy, M.S. [Cochin University of Science and Technology, Cochin (India); Verma, S. [Raja Ramanna Centre for Advanced Technology, Laser Materials Development and Devices Division, Indore (India)

    2014-03-15

    A potential semiorganic nonlinear optical material, L-alanine cadmium chloride monohydrate has been successfully synthesised and single crystals have been grown by slow evaporation solution growth technique at room temperature by using double distilled water as the solvent. The lattice dimensions of the grown crystal have been analysed by adopting powder X-ray diffraction technique and found that it crystallised in monoclinic system with space group C2. The crystalline perfection of the as-grown crystal has been assessed by high resolution X-ray diffraction and X-ray topography techniques and observed that the quality of the grown specimen is reasonably good. Its optical properties were examined by UV-Vis and photoluminescence techniques and found that there is no absorption in the entire visible range. Its functional groups were identified from FT-Raman and observed that there is no incorporation of other impurities during crystallisation. Its relative second harmonic generation efficiency has been tested with different particle size by Kurtz powder technique and found that within the coherence length the title compound is phase matchable. Its various thermal properties like thermal conductivity, specific heat, thermal effusivity, etc. have been evaluated by photopyroelectric technique and compared with other organic and inorganic materials. To confirm its piezoelectric response, its piezoelectric charge coefficient was measured using piezometer and found low. Its optical homogeneity as well as birefringence measurement of the grown specimen has been carried out by interferometric technique. The surface defects of the grown LACCM single crystal were analysed with etching at room temperature using water as an etchant. (orig.)

  7. Analysis of nonlinear optical properties in donor–acceptor materials

    Energy Technology Data Exchange (ETDEWEB)

    Day, Paul N. [Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States); General Dynamics Information Technology, Inc., Dayton, Ohio 45431 (United States); Pachter, Ruth [Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States); Nguyen, Kiet A. [Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States); UES, Inc., Dayton, Ohio 45432 (United States)

    2014-05-14

    Time-dependent density functional theory has been used to calculate nonlinear optical (NLO) properties, including the first and second hyperpolarizabilities as well as the two-photon absorption cross-section, for the donor-acceptor molecules p-nitroaniline and dimethylamino nitrostilbene, and for respective materials attached to a gold dimer. The CAMB3LYP, B3LYP, PBE0, and PBE exchange-correlation functionals all had fair but variable performance when compared to higher-level theory and to experiment. The CAMB3LYP functional had the best performance on these compounds of the functionals tested. However, our comprehensive analysis has shown that quantitative prediction of hyperpolarizabilities is still a challenge, hampered by inadequate functionals, basis sets, and solvation models, requiring further experimental characterization. Attachment of the Au{sub 2}S group to molecules already known for their relatively large NLO properties was found to further enhance the response. While our calculations show a modest enhancement for the first hyperpolarizability, the enhancement of the second hyperpolarizability is predicted to be more than an order of magnitude.

  8. Electro-optic properties of nematic and ferroelectric liquid crystalline nanocolloids doped with partially reduced graphene oxide

    Science.gov (United States)

    Lapanik, Valeri; Timofeev, Sergei; Haase, Wolfgang

    2016-02-01

    Flakes of partially reduced graphene oxide (PRGO) were doped in nematic liquid crystals (NLCs) and ferroelectric liquid crystals (FLCs), respectively. The dielectric and electro-optical properties of NLCs doped with those flakes have been investigated. Threshold voltage and switching times are reduced by 30%-50%. This is primarily due to the decrease of the elastic properties of the nanocolloids compared to the non-doped nematics. The influence of the PRGO flakes on the spontaneous polarization, tilt angle and switching time of FLCs was investigated too. Such flakes reduce the response time by 40%-60%, increases spontaneous polarization by 20%-25% and increase the tilt angle by 15%-20%.

  9. A novel graphene oxide-polyimide as optical waveguide material: Synthesis and thermo-optic switch properties

    Science.gov (United States)

    Cao, Tianlin; Zhao, Fanyu; Da, Zulin; Qiu, Fengxian; Yang, Dongya; Guan, Yijun; Cao, Guorong; Zhao, Zerun; Li, Jiaxin; Guo, Xiaotong

    2016-10-01

    In this work, a novel graphene oxide-polyimide (GOPI) as optical waveguide material was prepared. The structure, mechanical, thermal property and morphology of the GOPI was characterized by using fourier transform infrared, UV-visible spectroscopy, near-infrared spectrum, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscope and transmission electron microscopy. The thermo-optic coefficients (dn/dT) are -9.16 × 10-4 (532 nm), -7.56 × 10-4 (650 nm) and -4.82 × 10-4 (850 nm) °C-1, respectively. Based on the thermo-optic effect of prepared GOPI as waveguide material, a Y-branch with branching angle of 0.143° and Mach-Zehnder thermo-optic switches were designed. Using finite difference beam propagation method (FD-BPM) method, the simulation results such as power consumptions and response times of two different thermo-optic switches were obtained.

  10. Bietti's Crystalline Dystrophy

    Science.gov (United States)

    ... Dystrophy > Facts About Bietti's Crystalline Dystrophy Facts About Bietti's Crystalline Dystrophy This information was developed by the ... is the best person to answer specific questions. Bietti’s Crystalline Dystrophy Defined What is Bietti’s Crystalline Dystrophy? ...

  11. Methods of determining loads and fiber orientations in anisotropic non-crystalline materials using energy flux deviation

    Science.gov (United States)

    Prosser, William H. (Inventor); Kriz, Ronald D. (Inventor); Fitting, Dale W. (Inventor)

    1993-01-01

    An ultrasonic wave is applied to an anisotropic sample material in an initial direction and an angle of flux deviation of the ultrasonic wave front is measured from this initial direction. This flux deviation angle is induced by the unknown applied load. The flux shift is determined between this flux deviation angle and a previously determined angle of flux deviation of an ultrasonic wave applied to a similar anisotropic reference material under an initial known load condition. This determined flux shift is then compared to a plurality of flux shifts of a similarly tested, similar anisotropic reference material under a plurality of respective, known load conditions, whereby the load applied to the particular anisotropic sample material is determined. A related method is disclosed for determining the fiber orientation from known loads and a determined flux shift.

  12. Inclusion Tuning of Nonlinear Optical Materials: KTP (Potassium Titanyl Phosphate) Isomorphs

    Science.gov (United States)

    1988-06-01

    o OFCE OF NAVAL RESEARCH Contract N00014-87-K-0457 V R&T Code 4134015-01 0) Technical. Report No. 23 "Inclusion Tuning of Nonlinear Optical Materials : KIP...bry block nuum.ber) see attached #11 Inclusion Tuning of Nonlinear Optical Materials : KTP Isomorphs * Q1 UISTRISUTION/AVAII..ASILITY 00 ABSTRACT 21

  13. Third harmonic generation as a rapid selection tool for organic materials for nonlinear integrated optics devices

    NARCIS (Netherlands)

    Blom, F.C.; Driessen, A.; Hoekstra, Hugo; van Schoot, J.B.P.; van Schoot, Jan B.P.; Popma, T.J.A.

    1999-01-01

    In the long trajectory from the synthesis of organic nonlinear optical materials to the completed all-optical device it is highly desirable to be able to concentrate already in an early state on only a few promising materials. Third harmonic generation (THG) is a very convenient method as it allows

  14. Eye/Sensor Protection against Laser Irradiation Organic Nonlinear Optical Materials

    Science.gov (United States)

    1989-06-12

    Recent developments in organic nonlinear optical materials for application to eye and sensor protection are reviewed. This compendium includes a...noteworthy organic third-order nonlinear optical materials is included as an appendix. Lasers are playing an important and increasing role in modern

  15. Third harmonic generation as a rapid selection tool for organic materials for nonlinear integrated optics devices

    NARCIS (Netherlands)

    Blom, Freek C.; Driessen, Alfred; Hoekstra, Hugo J.W.M.; Schoot, van Jan B.P.; Popma, Th.J.A.

    1999-01-01

    In the long trajectory from the synthesis of organic nonlinear optical materials to the completed all-optical device it is highly desirable to be able to concentrate already in an early state on only a few promising materials. Third harmonic generation (THG) is a very convenient method as it allows

  16. An all-optical matrix multiplication scheme with non-linear material based switching system

    Institute of Scientific and Technical Information of China (English)

    Archan Kumar Das; Sourangshu Mukhopadhyay

    2005-01-01

    Optics is a potential candidate in information, data, and image processing. In all-optical data and information processing, optics has been used as information carrying signal because of its inherent advantages of parallelism. Several optical methods are proposed in support of the above processing. In many algebraic,arithmetic, and image processing schemes fundamental logic and memory operations are conducted exploring all-optical devices. In this communication we report an all-optical matrix multiplication operation with non-linear material based switching circuit.

  17. Group IV all-semiconductor spintronics. Materials aspects and optical spin selection rules

    Energy Technology Data Exchange (ETDEWEB)

    Sircar, Narayan

    2012-04-03

    In the scope of the present thesis various aspects for the realization of spintronic applications based on group IV semiconductors are discussed. This work comprises a refined material characterization of the magnetic semiconductor GeMn. We furthermore present efforts to utilize this material as spin injector for a Si-based optical spintronic device. Applying transmission electron microscopy and atom probe tomography, we are able to resolve a vertical anisotropy in the self-assembly, leading to the stacking of well-defined clusters in the growth direction. Three-dimensional atom distribution maps confirm that clusters are built from a nonstoichiometric GeMn alloy and exhibit a high-Mn-concentration core with a decreasing Mn concentration toward a shell. An amorphous nature of the cluster cores as well as the crystallinity of the shells, coherent with the surrounding Ge lattice, are revealed in scanning transmission electron microscopy. We localize a strain field surrounding each GeMn cluster by scanning transmission electron microscopy. The importance of strain to the stacking phenomenon of the clusters becomes clear in studies of Ge/GeMn superlattice structures, where a vertical spatial correlation of clusters over 30 nm-thick Ge spacer layers is observed. We present evidence that electrical transport properties of the p-type GeMn thin films fabricated on high-resistivity Ge substrates are severely influenced by parallel conduction through the substrate. It is shown that substrate conduction persists also for wellconducting degenerate p-type reference thin films, giving rise to an effective two-layer conduction scheme. GeMn thin films fabricated on these substrates exhibit only a negligible magnetoresistance effect. Before integrating GeMn in an optical spintronic device, some key aspects important for an understanding of the optical injection and detection of carrier spins in Si and Si-based heterostructures are clarified in the second part of this thesis. In

  18. Hetero-epitaxial growth of the cubic single crystalline HfO 2 film as high k materials by pulsed laser ablation

    Science.gov (United States)

    Zhang, Xinqiang; Tu, Hailing; Wang, Xiaona; Xiong, Yuhua; Yang, Mengmeng; Wang, Lei; Du, Jun

    2010-10-01

    We report a hetero-epitaxial growth of cubic single crystalline HfO 2 film on Si substrates as high k materials by pulse laser ablation (PLA) at 820 °C. To eliminate the interfacial defects, the HfO 2 film has then been annealed at 900 °C for 5 min in N 2. Reflection high-energy electron diffraction (RHEED) results indicate orientation of the HfO 2 film on Si substrates corresponding to (∥( and [∥[. An interface layer has been revealed by high-resolution transmission electron microscope (HRTEM). Through capacitance-voltage ( C- V) and current-voltage ( I- V), it has been obtained that the leakage current of the HfO 2 gate insulator with dielectric constant of 26 is 5×10 -6 A/cm 2 at -1 V.

  19. Technology development of the nano-crystalline silicon thin film materials%纳米晶硅薄膜材料的技术发展

    Institute of Scientific and Technical Information of China (English)

    吴大维; 吴越侠; 唐志斌

    2012-01-01

    The recent development of the nano - crystalline silicon thin film material is reviewed in this paper. Some ideas is proposed to promote advances of the silicon thin film solar cells. In this paper, we make come discussions on the development of silicon thin film solar cells and predict the prospect of latest ones.%本文综述了硅基薄膜材料的发展历程;提出了一些促进硅基薄膜电池技术进步的思路;并对硅 基薄膜电池的发展进行了有益的探讨,对最新的硅基薄膜太阳能电池作了展望.

  20. Some molecular/crystalline factors that affect the sensitivities of energetic materials: molecular surface electrostatic potentials, lattice free space and maximum heat of detonation per unit volume.

    Science.gov (United States)

    Politzer, Peter; Murray, Jane S

    2015-02-01

    We discuss three molecular/crystalline properties that we believe to be among the factors that influence the impact/shock sensitivities of energetic materials (i.e., their vulnerabilities to unintended detonation due to impact or shock). These properties are (a) the anomalously strong positive electrostatic potentials in the central regions of their molecular surfaces, (b) the free space per molecule in their crystal lattices, and (c) their maximum heats of detonation per unit volume. Overall, sensitivity tends to become greater as these properties increase; however these are general trends, not correlations. Nitramines are exceptions in that their sensitivities show little or no variation with free space in the lattice and heat of detonation per unit volume. We outline some of the events involved in detonation initiation and show how the three properties are related to different ones of these events.